2016-11-11T04:45:27.568Z,1478839527.568 [Supervisor](DEBUG): Initializing supervisor.
2016-11-11T04:45:27.571Z,1478839527.571 [SyncHandler](DEBUG): Created PCaller Thread at 4051A4E0
2016-11-11T04:45:27.572Z,1478839527.572 [SyncHandler](INFO): Protected caller Thread ID is 765
2016-11-11T04:45:27.572Z,1478839527.572 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2016-11-11T04:45:27.573Z,1478839527.573 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 4054A4E0
2016-11-11T04:45:27.574Z,1478839527.574 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 766
2016-11-11T04:45:27.576Z,1478839527.576 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2016-11-11T04:45:27.589Z,1478839527.589 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2016-11-11T04:45:27.590Z,1478839527.590 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 4057A4E0
2016-11-11T04:45:27.590Z,1478839527.590 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 767
2016-11-11T04:45:27.591Z,1478839527.591 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2016-11-11T04:45:27.592Z,1478839527.592 [logger ThreadHandler](DEBUG): Created PCaller Thread at 405AA4E0
2016-11-11T04:45:27.592Z,1478839527.592 [logger ThreadHandler](INFO): Protected caller Thread ID is 768
2016-11-11T04:45:27.594Z,1478839527.594 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2016-11-11T04:45:27.595Z,1478839527.595 [Supervisor](INFO): Looking for Config files in directory: Config/
2016-11-11T04:45:27.598Z,1478839527.598 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2016-11-11T04:45:27.792Z,1478839527.792 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2016-11-11T04:45:27.794Z,1478839527.794 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2016-11-11T04:45:27.921Z,1478839527.921 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2016-11-11T04:45:27.922Z,1478839527.922 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2016-11-11T04:45:28.268Z,1478839528.268 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2016-11-11T04:45:28.269Z,1478839528.269 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2016-11-11T04:45:28.402Z,1478839528.402 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2016-11-11T04:45:28.404Z,1478839528.404 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2016-11-11T04:45:28.491Z,1478839528.490 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2016-11-11T04:45:28.696Z,1478839528.696 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2016-11-11T04:45:28.697Z,1478839528.697 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2016-11-11T04:45:28.784Z,1478839528.784 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2016-11-11T04:45:28.786Z,1478839528.786 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2016-11-11T04:45:29.069Z,1478839529.069 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2016-11-11T04:45:29.070Z,1478839529.070 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2016-11-11T04:45:29.445Z,1478839529.445 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2016-11-11T04:45:29.446Z,1478839529.446 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2016-11-11T04:45:29.758Z,1478839529.758 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2016-11-11T04:45:29.759Z,1478839529.759 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2016-11-11T04:45:30.292Z,1478839530.292 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2016-11-11T04:45:30.293Z,1478839530.293 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2016-11-11T04:45:30.504Z,1478839530.504 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2016-11-11T04:45:30.505Z,1478839530.505 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2016-11-11T04:45:36.092Z,1478839536.092 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2016-11-11T04:45:36.094Z,1478839536.095 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2016-11-11T04:45:36.602Z,1478839536.602 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2016-11-11T04:45:36.602Z,1478839536.602 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2016-11-11T04:45:36.716Z,1478839536.716 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2016-11-11T04:45:36.718Z,1478839536.718 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-aku/
2016-11-11T04:45:36.721Z,1478839536.721 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Battery.cfg
2016-11-11T04:45:36.964Z,1478839536.964 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2016-11-11T04:45:36.965Z,1478839536.965 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/BIT.cfg
2016-11-11T04:45:37.070Z,1478839537.070 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Navigation.cfg
2016-11-11T04:45:37.180Z,1478839537.180 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Control.cfg
2016-11-11T04:45:37.281Z,1478839537.281 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Simulator.cfg
2016-11-11T04:45:37.372Z,1478839537.372 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Science.cfg
2016-11-11T04:45:37.524Z,1478839537.523 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Sensor.cfg
2016-11-11T04:45:37.701Z,1478839537.701 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Servo.cfg
2016-11-11T04:45:37.814Z,1478839537.814 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/logger.cfg
2016-11-11T04:45:37.916Z,1478839537.916 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/secure.cfg
2016-11-11T04:45:38.005Z,1478839538.005 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/vehicle.cfg
2016-11-11T04:45:38.179Z,1478839538.179 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg
2016-11-11T04:45:38.183Z,1478839538.183 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2016-11-11T04:45:38.345Z,1478839538.345 [SBIT](DEBUG): Construct Startup Built In Test.
2016-11-11T04:45:38.378Z,1478839538.378 [SBIT] Loaded
2016-11-11T04:45:38.378Z,1478839538.378 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2016-11-11T04:45:38.379Z,1478839538.379 [IBIT](DEBUG): Construct Initiated Built In Test.
2016-11-11T04:45:38.409Z,1478839538.409 [IBIT] Loaded
2016-11-11T04:45:38.409Z,1478839538.409 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2016-11-11T04:45:38.413Z,1478839538.413 [CBIT](DEBUG): Construct Continuous Built In Test.
2016-11-11T04:45:38.572Z,1478839538.572 [CBIT] Loaded
2016-11-11T04:45:38.572Z,1478839538.572 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2016-11-11T04:45:38.573Z,1478839538.573 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2016-11-11T04:45:38.574Z,1478839538.574 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2016-11-11T04:45:38.644Z,1478839538.644 [VerticalControl](DEBUG): Construct VerticalControl.
2016-11-11T04:45:38.753Z,1478839538.753 [VerticalControl] Loaded
2016-11-11T04:45:38.753Z,1478839538.753 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2016-11-11T04:45:38.754Z,1478839538.754 [HorizontalControl](DEBUG): Construct HorizontalControl.
2016-11-11T04:45:38.820Z,1478839538.820 [HorizontalControl] Loaded
2016-11-11T04:45:38.821Z,1478839538.820 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2016-11-11T04:45:38.821Z,1478839538.821 [SpeedControl](DEBUG): Construct SpeedControl.
2016-11-11T04:45:38.827Z,1478839538.827 [SpeedControl] Loaded
2016-11-11T04:45:38.827Z,1478839538.828 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2016-11-11T04:45:38.828Z,1478839538.828 [LoopControl](DEBUG): Construct LoopControl.
2016-11-11T04:45:38.829Z,1478839538.829 [LoopControl] Loaded
2016-11-11T04:45:38.829Z,1478839538.829 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2016-11-11T04:45:38.829Z,1478839538.829 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2016-11-11T04:45:38.830Z,1478839538.830 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2016-11-11T04:45:38.870Z,1478839538.870 [DepthRateCalculator] Loaded
2016-11-11T04:45:38.871Z,1478839538.871 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2016-11-11T04:45:38.876Z,1478839538.876 [PitchRateCalculator] Loaded
2016-11-11T04:45:38.877Z,1478839538.877 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2016-11-11T04:45:38.888Z,1478839538.888 [SpeedCalculator] Loaded
2016-11-11T04:45:38.889Z,1478839538.889 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2016-11-11T04:45:38.906Z,1478839538.906 [TempGradientCalculator] Loaded
2016-11-11T04:45:38.906Z,1478839538.907 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2016-11-11T04:45:38.924Z,1478839538.924 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2016-11-11T04:45:38.924Z,1478839538.924 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2016-11-11T04:45:38.929Z,1478839538.929 [YawRateCalculator] Loaded
2016-11-11T04:45:38.930Z,1478839538.930 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2016-11-11T04:45:38.930Z,1478839538.930 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2016-11-11T04:45:38.931Z,1478839538.931 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2016-11-11T04:45:39.050Z,1478839539.050 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2016-11-11T04:45:39.050Z,1478839539.050 [StratificationFrontDetector](DEBUG): (re)initializing
2016-11-11T04:45:39.050Z,1478839539.050 [StratificationFrontDetector] Loaded
2016-11-11T04:45:39.051Z,1478839539.051 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2016-11-11T04:45:39.051Z,1478839539.051 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2016-11-11T04:45:39.052Z,1478839539.052 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2016-11-11T04:45:39.335Z,1478839539.335 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2016-11-11T04:45:39.336Z,1478839539.336 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2016-11-11T04:45:39.461Z,1478839539.461 [DeadReckonUsingMultipleVelocitySources] Loaded
2016-11-11T04:45:39.461Z,1478839539.461 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2016-11-11T04:45:39.520Z,1478839539.520 [DeadReckonUsingSpeedCalculator] Loaded
2016-11-11T04:45:39.520Z,1478839539.520 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2016-11-11T04:45:39.577Z,1478839539.577 [DeadReckonWithRespectToWater] Loaded
2016-11-11T04:45:39.578Z,1478839539.578 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToWater" handled in the control thread.
2016-11-11T04:45:39.636Z,1478839539.636 [DeadReckonWithRespectToSeafloor] Loaded
2016-11-11T04:45:39.636Z,1478839539.636 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2016-11-11T04:45:39.700Z,1478839539.700 [DeadReckonUsingDVLWaterTrack] Loaded
2016-11-11T04:45:39.700Z,1478839539.700 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingDVLWaterTrack" handled in the control thread.
2016-11-11T04:45:39.718Z,1478839539.718 [NavChart] Loaded
2016-11-11T04:45:39.718Z,1478839539.718 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2016-11-11T04:45:39.723Z,1478839539.723 [UniversalFixResidualReporter] Loaded
2016-11-11T04:45:39.723Z,1478839539.723 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2016-11-11T04:45:39.724Z,1478839539.724 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2016-11-11T04:45:39.724Z,1478839539.724 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2016-11-11T04:45:39.734Z,1478839539.734 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2016-11-11T04:45:39.734Z,1478839539.734 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2016-11-11T04:45:39.881Z,1478839539.881 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2016-11-11T04:45:39.882Z,1478839539.882 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2016-11-11T04:45:40.516Z,1478839540.516 [DataOverHttps] Loaded
2016-11-11T04:45:40.517Z,1478839540.517 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2016-11-11T04:45:40.543Z,1478839540.543 [Depth_Keller] Loaded
2016-11-11T04:45:40.544Z,1478839540.543 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2016-11-11T04:45:40.549Z,1478839540.549 [DropWeight] Loaded
2016-11-11T04:45:40.549Z,1478839540.549 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2016-11-11T04:45:40.647Z,1478839540.647 [NAL9602] Loaded
2016-11-11T04:45:40.648Z,1478839540.648 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2016-11-11T04:45:40.657Z,1478839540.657 [Onboard] Loaded
2016-11-11T04:45:40.658Z,1478839540.658 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2016-11-11T04:45:40.665Z,1478839540.665 [Radio_Surface] Loaded
2016-11-11T04:45:40.665Z,1478839540.665 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2016-11-11T04:45:40.667Z,1478839540.667 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 4098A4E0
2016-11-11T04:45:40.667Z,1478839540.667 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 848
2016-11-11T04:45:40.863Z,1478839540.863 [PNI_TCM] Loaded
2016-11-11T04:45:40.863Z,1478839540.863 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2016-11-11T04:45:41.226Z,1478839541.226 [Rowe_600LCM] Loaded
2016-11-11T04:45:41.227Z,1478839541.227 [ComponentRegistry](DEBUG): Component "Rowe_600LCM" handled in its own thread.
2016-11-11T04:45:41.228Z,1478839541.228 [Rowe_600LCM ThreadHandler](DEBUG): Created PCaller Thread at 409BA4E0
2016-11-11T04:45:41.228Z,1478839541.228 [Rowe_600LCM ThreadHandler](INFO): Protected caller Thread ID is 849
2016-11-11T04:45:43.206Z,1478839543.206 [BPC1] Loaded
2016-11-11T04:45:43.206Z,1478839543.206 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2016-11-11T04:45:43.206Z,1478839543.206 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2016-11-11T04:45:43.207Z,1478839543.207 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2016-11-11T04:45:44.369Z,1478839544.369 [BuoyancyServo] Loaded
2016-11-11T04:45:44.370Z,1478839544.370 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2016-11-11T04:45:44.383Z,1478839544.383 [ElevatorServo] Loaded
2016-11-11T04:45:44.383Z,1478839544.383 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2016-11-11T04:45:44.395Z,1478839544.395 [MassServo] Loaded
2016-11-11T04:45:44.396Z,1478839544.396 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2016-11-11T04:45:44.408Z,1478839544.408 [RudderServo] Loaded
2016-11-11T04:45:44.408Z,1478839544.408 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2016-11-11T04:45:44.421Z,1478839544.421 [ThrusterServo] Loaded
2016-11-11T04:45:44.421Z,1478839544.421 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2016-11-11T04:45:44.421Z,1478839544.421 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2016-11-11T04:45:44.422Z,1478839544.422 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2016-11-11T04:45:44.560Z,1478839544.560 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2016-11-11T04:45:44.560Z,1478839544.560 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2016-11-11T04:45:44.602Z,1478839544.602 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2016-11-11T04:45:44.605Z,1478839544.605 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2016-11-11T04:45:44.606Z,1478839544.606 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2016-11-11T04:45:44.614Z,1478839544.614 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2016-11-11T04:45:44.615Z,1478839544.615 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40A684E0
2016-11-11T04:45:44.615Z,1478839544.615 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 850
2016-11-11T04:45:44.620Z,1478839544.620 [Supervisor](INFO): Main Thread ID is 762
2016-11-11T04:45:44.620Z,1478839544.620 [Supervisor](DEBUG): Running supervisor.
2016-11-11T04:45:44.621Z,1478839544.621 [CommandLine ThreadHandler](INFO): Handler Thread ID is 851
2016-11-11T04:45:44.624Z,1478839544.624 [controlThread ThreadHandler](INFO): Handler Thread ID is 852
2016-11-11T04:45:44.624Z,1478839544.624 [controlThread](DEBUG): Initializing ControlThread
2016-11-11T04:45:44.625Z,1478839544.625 [SBIT](INFO): Initialize SBIT Component.
2016-11-11T04:45:44.626Z,1478839544.626 [SBIT](IMPORTANT): git: 2016-06-23-49-g7a7cb15
2016-11-11T04:45:44.626Z,1478839544.626 [SBIT](INFO): git hash: 7a7cb1535d617db5219abc778a5c7c082fdfbef2
2016-11-11T04:45:44.628Z,1478839544.628 [SBIT](INFO): Kernel Reporting Different Release From Configuration.
Kernel Expected: 2.6.27.8
Kernel Reported: 2.6.27.8-00011-g2bc81df-dirty
2016-11-11T04:45:44.628Z,1478839544.628 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #646 PREEMPT Thu Feb 11 17:01:12 PST 2016
2016-11-11T04:45:44.629Z,1478839544.629 [SBIT](INFO): Beginning SBIT in 79.000000 seconds.
2016-11-11T04:45:44.630Z,1478839544.630 [IBIT](INFO): Initialize IBIT Component.
2016-11-11T04:45:44.631Z,1478839544.631 [CBIT](DEBUG): Initialize CBIT Component.
2016-11-11T04:45:44.631Z,1478839544.631 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL.
2016-11-11T04:45:44.631Z,1478839544.631 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2016-11-11T04:45:44.632Z,1478839544.632 [logger ThreadHandler](INFO): Handler Thread ID is 853
2016-11-11T04:45:44.660Z,1478839544.660 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 854
2016-11-11T04:45:44.666Z,1478839544.666 [Radio_Surface](INFO): Powering up
2016-11-11T04:45:44.684Z,1478839544.684 [Rowe_600LCM ThreadHandler](INFO): Handler Thread ID is 855
2016-11-11T04:45:44.684Z,1478839544.684 [Rowe_600LCM](INFO): Initializing
2016-11-11T04:45:44.685Z,1478839544.685 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T04:45:44.685Z,1478839544.685 [Rowe_600LCM](INFO): LCM OK
2016-11-11T04:45:44.685Z,1478839544.685 [Rowe_600LCM](INFO): Powering up
2016-11-11T04:45:44.704Z,1478839544.704 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 856
2016-11-11T04:45:44.712Z,1478839544.713 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2016-11-11T04:45:44.713Z,1478839544.713 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2016-11-11T04:45:44.713Z,1478839544.713 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2016-11-11T04:45:44.713Z,1478839544.713 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2016-11-11T04:45:44.713Z,1478839544.713 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2016-11-11T04:45:44.714Z,1478839544.714 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2016-11-11T04:45:44.714Z,1478839544.714 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2016-11-11T04:45:44.714Z,1478839544.714 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2016-11-11T04:45:44.714Z,1478839544.714 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2016-11-11T04:45:44.714Z,1478839544.714 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2016-11-11T04:45:44.715Z,1478839544.714 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2016-11-11T04:45:44.715Z,1478839544.715 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2016-11-11T04:45:44.715Z,1478839544.715 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2016-11-11T04:45:44.717Z,1478839544.717 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2016-11-11T04:45:44.718Z,1478839544.718 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2016-11-11T04:45:44.719Z,1478839544.719 [LoopControl](DEBUG): Initialize LoopControlComponent.
2016-11-11T04:45:44.719Z,1478839544.719 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2016-11-11T04:45:44.720Z,1478839544.720 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2016-11-11T04:45:44.720Z,1478839544.720 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2016-11-11T04:45:44.720Z,1478839544.720 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2016-11-11T04:45:44.721Z,1478839544.721 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2016-11-11T04:45:44.722Z,1478839544.722 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2016-11-11T04:45:44.722Z,1478839544.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T04:45:44.723Z,1478839544.723 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2016-11-11T04:45:44.723Z,1478839544.723 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2016-11-11T04:45:44.724Z,1478839544.724 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2016-11-11T04:45:44.724Z,1478839544.724 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2016-11-11T04:45:44.725Z,1478839544.725 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:45:44.725Z,1478839544.725 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:45:44.726Z,1478839544.726 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T04:45:44.726Z,1478839544.726 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:45:44.726Z,1478839544.726 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:45:44.727Z,1478839544.727 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T04:45:44.727Z,1478839544.727 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:45:44.728Z,1478839544.728 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:45:44.728Z,1478839544.728 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T04:45:44.729Z,1478839544.729 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:45:44.729Z,1478839544.729 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:45:44.729Z,1478839544.730 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T04:45:44.730Z,1478839544.730 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:45:44.730Z,1478839544.730 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:45:44.731Z,1478839544.731 [NavChart](DEBUG): Initialize NavChart Navigation.
2016-11-11T04:45:44.731Z,1478839544.731 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2016-11-11T04:45:44.772Z,1478839544.772 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2016-11-11T04:45:44.812Z,1478839544.812 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2016-11-11T04:45:44.855Z,1478839544.855 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2016-11-11T04:45:44.857Z,1478839544.856 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2016-11-11T04:45:44.936Z,1478839544.936 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2016-11-11T04:45:44.937Z,1478839544.937 [Default:A.Wait](DEBUG): Construct Wait.
2016-11-11T04:45:44.938Z,1478839544.938 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2016-11-11T04:45:44.989Z,1478839544.989 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2016-11-11T04:45:44.991Z,1478839544.991 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2016-11-11T04:45:45.017Z,1478839545.017 [Default:E.Execute](DEBUG): Construct Execute.
2016-11-11T04:45:45.021Z,1478839545.021 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2016-11-11T04:45:45.028Z,1478839545.028 [controlThread](DEBUG): Component order: CycleStarter,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,PNI_TCM,BPC1,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToWater,DeadReckonWithRespectToSeafloor,DeadReckonUsingDVLWaterTrack,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2016-11-11T04:45:45.070Z,1478839545.070 [Depth_Keller](ERROR): Pressure reading out of range: 1895.584351 decibar
2016-11-11T04:45:45.273Z,1478839545.273 [DepthRateCalculator](ERROR): Depth measurement is not active
2016-11-11T04:45:45.356Z,1478839545.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:45.356Z,1478839545.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-11T04:45:45.554Z,1478839545.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:45.587Z,1478839545.587 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:45.594Z,1478839545.594 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:45.633Z,1478839545.633 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:45.647Z,1478839545.648 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:45.753Z,1478839545.753 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2016-11-11T04:45:45.760Z,1478839545.760 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2016-11-11T04:45:45.782Z,1478839545.782 [ElevatorServo](DEBUG): Initializing EZServoServo.
2016-11-11T04:45:45.788Z,1478839545.787 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2016-11-11T04:45:45.801Z,1478839545.801 [MassServo](DEBUG): Initializing EZServoServo.
2016-11-11T04:45:45.803Z,1478839545.803 [MassServo](DEBUG): Initializing MassServo.
2016-11-11T04:45:45.809Z,1478839545.809 [RudderServo](DEBUG): Initializing EZServoServo.
2016-11-11T04:45:45.815Z,1478839545.815 [RudderServo](DEBUG): Initializing RudderServo.
2016-11-11T04:45:45.821Z,1478839545.821 [ThrusterServo](DEBUG): Initializing EZServoServo.
2016-11-11T04:45:45.827Z,1478839545.827 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2016-11-11T04:45:46.074Z,1478839546.074 [NAL9602](INFO): Powering up NAL9602
2016-11-11T04:45:46.150Z,1478839546.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:46.151Z,1478839546.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-11T04:45:46.152Z,1478839546.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:46.153Z,1478839546.153 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:46.154Z,1478839546.154 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:46.154Z,1478839546.154 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:46.163Z,1478839546.163 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:46.333Z,1478839546.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:46.333Z,1478839546.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-11T04:45:46.334Z,1478839546.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:46.339Z,1478839546.339 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:46.340Z,1478839546.340 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:46.341Z,1478839546.341 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:46.342Z,1478839546.342 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:46.687Z,1478839546.687 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2016-11-11T04:45:46.687Z,1478839546.687 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2016-11-11T04:45:46.688Z,1478839546.688 [BuoyancyServo] Communications Fault, FailCount= 1
2016-11-11T04:45:46.688Z,1478839546.688 [BuoyancyServo](ERROR): Communications Fault
2016-11-11T04:45:46.899Z,1478839546.899 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2016-11-11T04:45:46.944Z,1478839546.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:46.944Z,1478839546.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-11T04:45:46.946Z,1478839546.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:46.946Z,1478839546.946 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:46.947Z,1478839546.947 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:46.951Z,1478839546.951 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:46.952Z,1478839546.952 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:46.975Z,1478839546.975 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2016-11-11T04:45:46.976Z,1478839546.976 [BuoyancyServo](INFO): Powering down
2016-11-11T04:45:47.367Z,1478839547.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:47.368Z,1478839547.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-11T04:45:47.369Z,1478839547.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:47.369Z,1478839547.369 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:47.370Z,1478839547.370 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:47.379Z,1478839547.379 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:47.380Z,1478839547.380 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:47.735Z,1478839547.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:47.735Z,1478839547.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-11T04:45:47.736Z,1478839547.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:47.737Z,1478839547.737 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:47.738Z,1478839547.738 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:47.739Z,1478839547.739 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:47.739Z,1478839547.740 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:48.135Z,1478839548.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:48.135Z,1478839548.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-11T04:45:48.136Z,1478839548.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:48.137Z,1478839548.137 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:48.138Z,1478839548.138 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:48.139Z,1478839548.139 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:48.140Z,1478839548.140 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:48.549Z,1478839548.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:48.549Z,1478839548.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-11T04:45:48.550Z,1478839548.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:48.551Z,1478839548.551 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:48.552Z,1478839548.552 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:48.553Z,1478839548.553 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:48.554Z,1478839548.554 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-11-11T04:45:48.974Z,1478839548.974 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T04:45:49.033Z,1478839549.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-11T04:45:49.034Z,1478839549.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:49.121Z,1478839549.121 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2016-11-11T04:45:49.121Z,1478839549.121 [BuoyancyServo] No Fault, FailCount= 1
2016-11-11T04:45:49.154Z,1478839549.154 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T04:45:49.462Z,1478839549.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-11T04:45:49.496Z,1478839549.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:49.538Z,1478839549.538 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2016-11-11T04:45:49.538Z,1478839549.538 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2016-11-11T04:45:49.982Z,1478839549.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-11T04:45:49.983Z,1478839549.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:50.070Z,1478839550.070 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T04:45:50.072Z,1478839550.072 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T04:45:50.073Z,1478839550.073 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T04:45:50.275Z,1478839550.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:50.629Z,1478839550.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:51.078Z,1478839551.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:51.454Z,1478839551.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:51.835Z,1478839551.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:52.247Z,1478839552.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:52.633Z,1478839552.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:53.041Z,1478839553.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:53.433Z,1478839553.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:53.841Z,1478839553.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:54.226Z,1478839554.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:54.637Z,1478839554.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:55.038Z,1478839555.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:55.432Z,1478839555.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:55.841Z,1478839555.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:56.231Z,1478839556.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:56.773Z,1478839556.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:56.983Z,1478839556.983 [NAL9602](INFO): NAL9602 initialized
2016-11-11T04:45:57.046Z,1478839557.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:57.446Z,1478839557.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:57.882Z,1478839557.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:58.257Z,1478839558.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:58.658Z,1478839558.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:59.037Z,1478839559.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:59.429Z,1478839559.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:45:59.850Z,1478839559.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:00.258Z,1478839560.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:00.647Z,1478839560.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:01.055Z,1478839561.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:01.433Z,1478839561.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:01.823Z,1478839561.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:02.210Z,1478839562.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:02.633Z,1478839562.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:03.033Z,1478839563.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:03.422Z,1478839563.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:03.826Z,1478839563.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:04.221Z,1478839564.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:04.623Z,1478839564.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:05.047Z,1478839565.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:05.425Z,1478839565.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:05.837Z,1478839565.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:06.246Z,1478839566.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:06.629Z,1478839566.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:07.031Z,1478839567.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:07.434Z,1478839567.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:07.834Z,1478839567.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:08.238Z,1478839568.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:08.627Z,1478839568.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:09.041Z,1478839569.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:09.422Z,1478839569.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:09.837Z,1478839569.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:10.237Z,1478839570.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:10.641Z,1478839570.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:10.836Z,1478839570.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:46:11.018Z,1478839571.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:11.419Z,1478839571.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:11.632Z,1478839571.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:46:11.898Z,1478839571.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:12.277Z,1478839572.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:12.669Z,1478839572.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:13.041Z,1478839573.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:13.493Z,1478839573.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:13.891Z,1478839573.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:14.314Z,1478839574.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:14.641Z,1478839574.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:15.018Z,1478839575.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:15.433Z,1478839575.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:15.837Z,1478839575.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:16.229Z,1478839576.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:16.629Z,1478839576.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:17.042Z,1478839577.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:17.437Z,1478839577.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:17.817Z,1478839577.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:18.218Z,1478839578.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:18.637Z,1478839578.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:19.021Z,1478839579.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:19.418Z,1478839579.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:19.818Z,1478839579.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:20.229Z,1478839580.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:20.641Z,1478839580.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:21.045Z,1478839581.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:21.489Z,1478839581.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:21.837Z,1478839581.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:22.225Z,1478839582.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:22.610Z,1478839582.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:23.029Z,1478839583.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:23.444Z,1478839583.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:23.827Z,1478839583.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:24.232Z,1478839584.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:24.632Z,1478839584.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:25.029Z,1478839585.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:25.443Z,1478839585.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:25.932Z,1478839585.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:26.233Z,1478839586.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:26.625Z,1478839586.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:27.097Z,1478839587.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:27.423Z,1478839587.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:27.913Z,1478839587.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:28.233Z,1478839588.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:28.661Z,1478839588.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:29.069Z,1478839589.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:29.528Z,1478839589.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:29.823Z,1478839589.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:30.237Z,1478839590.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:30.637Z,1478839590.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:31.025Z,1478839591.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:31.491Z,1478839591.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:31.829Z,1478839591.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:32.233Z,1478839592.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:32.625Z,1478839592.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:33.041Z,1478839593.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:33.509Z,1478839593.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:33.829Z,1478839593.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:34.223Z,1478839594.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:34.637Z,1478839594.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:35.037Z,1478839595.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:35.482Z,1478839595.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:35.833Z,1478839595.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:36.233Z,1478839596.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:36.648Z,1478839596.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:37.013Z,1478839597.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:37.421Z,1478839597.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:37.838Z,1478839597.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:38.241Z,1478839598.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:38.630Z,1478839598.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:39.037Z,1478839599.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:39.433Z,1478839599.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:39.885Z,1478839599.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:40.247Z,1478839600.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:40.636Z,1478839600.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:41.018Z,1478839601.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:41.477Z,1478839601.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:41.872Z,1478839601.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:42.268Z,1478839602.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:42.623Z,1478839602.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:43.049Z,1478839603.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:43.529Z,1478839603.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:43.822Z,1478839603.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:44.221Z,1478839604.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:44.633Z,1478839604.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:45.025Z,1478839605.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:45.498Z,1478839605.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:45.836Z,1478839605.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:46.234Z,1478839606.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:46.645Z,1478839606.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:47.033Z,1478839607.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:47.514Z,1478839607.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:47.818Z,1478839607.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:48.226Z,1478839608.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:48.623Z,1478839608.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:49.027Z,1478839609.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:49.498Z,1478839609.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:49.817Z,1478839609.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:50.245Z,1478839610.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:50.651Z,1478839610.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:51.049Z,1478839611.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:51.465Z,1478839611.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:51.814Z,1478839611.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:52.214Z,1478839612.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:52.621Z,1478839612.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:53.025Z,1478839613.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:53.425Z,1478839613.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:53.888Z,1478839613.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:54.219Z,1478839614.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:54.621Z,1478839614.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:55.031Z,1478839615.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:55.465Z,1478839615.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:55.901Z,1478839615.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:56.234Z,1478839616.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:56.609Z,1478839616.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:57.045Z,1478839617.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:57.501Z,1478839617.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:57.845Z,1478839617.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:58.245Z,1478839618.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:58.616Z,1478839618.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:59.021Z,1478839619.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:59.470Z,1478839619.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:46:59.829Z,1478839619.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:00.218Z,1478839620.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:00.621Z,1478839620.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:01.017Z,1478839621.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:01.488Z,1478839621.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:01.825Z,1478839621.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:02.223Z,1478839622.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:02.618Z,1478839622.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:03.025Z,1478839623.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:03.487Z,1478839623.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:03.837Z,1478839623.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:04.224Z,1478839624.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:04.236Z,1478839624.236 [SBIT](IMPORTANT): Beginning Startup BIT
2016-11-11T04:47:04.241Z,1478839624.240 [CBIT](IMPORTANT): Beginning ground fault scan
2016-11-11T04:47:04.629Z,1478839624.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:05.018Z,1478839625.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:05.480Z,1478839625.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:05.817Z,1478839625.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:06.473Z,1478839626.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:06.895Z,1478839626.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:07.294Z,1478839627.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:07.684Z,1478839627.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:08.097Z,1478839628.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:08.485Z,1478839628.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:08.888Z,1478839628.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:09.284Z,1478839629.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:09.697Z,1478839629.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:10.173Z,1478839630.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:10.538Z,1478839630.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:10.950Z,1478839630.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:11.326Z,1478839631.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:11.769Z,1478839631.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:12.148Z,1478839632.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:12.577Z,1478839632.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:12.929Z,1478839632.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:13.401Z,1478839633.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:13.780Z,1478839633.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:14.184Z,1478839634.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:14.583Z,1478839634.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:14.989Z,1478839634.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:15.165Z,1478839635.165 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.016710
CHAN A1 (24V): -0.011204
CHAN A2 (12V): 0.015038
CHAN A3 (5V): 0.003799
CHAN B0 (3.3V): 0.000541
CHAN B1 (3.15aV): 0.000333
CHAN B2 (3.15bV): 0.000593
CHAN B3 (GND): -0.003890
OPEN: 0.003937
Full Scale Calc: 4.765 mA, -1.589 mA
2016-11-11T04:47:15.468Z,1478839635.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:15.785Z,1478839635.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:16.185Z,1478839636.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:16.585Z,1478839636.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:16.985Z,1478839636.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:17.463Z,1478839637.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:17.781Z,1478839637.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:18.185Z,1478839638.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:18.585Z,1478839638.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:18.985Z,1478839638.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:19.381Z,1478839639.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:19.970Z,1478839639.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:20.357Z,1478839640.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:20.786Z,1478839640.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:21.186Z,1478839641.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:21.557Z,1478839641.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:21.961Z,1478839641.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:22.362Z,1478839642.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:22.776Z,1478839642.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:23.164Z,1478839643.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:23.560Z,1478839643.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:23.957Z,1478839643.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:24.397Z,1478839644.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:24.821Z,1478839644.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:25.174Z,1478839645.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:25.581Z,1478839645.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:25.989Z,1478839645.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:26.357Z,1478839646.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:26.792Z,1478839646.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:27.192Z,1478839647.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:27.565Z,1478839647.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:27.961Z,1478839647.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:28.361Z,1478839648.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:28.753Z,1478839648.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:29.157Z,1478839649.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:29.561Z,1478839649.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:29.962Z,1478839649.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:30.359Z,1478839650.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:30.762Z,1478839650.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:31.173Z,1478839651.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:31.573Z,1478839651.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:31.969Z,1478839651.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:32.362Z,1478839652.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:32.773Z,1478839652.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:33.149Z,1478839653.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:33.589Z,1478839653.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:33.974Z,1478839653.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:34.350Z,1478839654.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:34.777Z,1478839654.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:35.156Z,1478839655.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:35.557Z,1478839655.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:35.961Z,1478839655.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:36.357Z,1478839656.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:36.760Z,1478839656.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:37.160Z,1478839657.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:37.561Z,1478839657.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:37.973Z,1478839657.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:38.369Z,1478839658.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:38.765Z,1478839658.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:39.161Z,1478839659.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:39.633Z,1478839659.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:39.968Z,1478839659.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:40.389Z,1478839660.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:40.806Z,1478839660.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:41.186Z,1478839661.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:41.609Z,1478839661.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:41.966Z,1478839661.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:42.373Z,1478839662.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:42.777Z,1478839662.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:43.169Z,1478839663.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:43.568Z,1478839663.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:43.966Z,1478839663.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:44.353Z,1478839664.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:44.753Z,1478839664.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:45.150Z,1478839665.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:45.336Z,1478839665.336 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T04:47:45.336Z,1478839665.336 [Rowe_600LCM] Communications Fault, FailCount= 1
2016-11-11T04:47:45.336Z,1478839665.336 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T04:47:45.554Z,1478839665.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T04:47:45.555Z,1478839665.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:45.592Z,1478839665.592 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T04:47:45.743Z,1478839665.743 [Rowe_600LCM](INFO): Powering down
2016-11-11T04:47:45.956Z,1478839665.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T04:47:45.957Z,1478839665.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:46.367Z,1478839666.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T04:47:46.368Z,1478839666.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:46.923Z,1478839666.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2016-11-11T04:47:46.924Z,1478839666.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:47.072Z,1478839667.072 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T04:47:47.072Z,1478839667.072 [Rowe_600LCM] No Fault, FailCount= 1
2016-11-11T04:47:47.322Z,1478839667.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2016-11-11T04:47:47.324Z,1478839667.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:47.359Z,1478839667.359 [Rowe_600LCM](INFO): Initializing
2016-11-11T04:47:47.360Z,1478839667.360 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T04:47:47.360Z,1478839667.360 [Rowe_600LCM](INFO): LCM OK
2016-11-11T04:47:47.360Z,1478839667.360 [Rowe_600LCM](INFO): Powering up
2016-11-11T04:47:47.725Z,1478839667.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2016-11-11T04:47:47.726Z,1478839667.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:48.118Z,1478839668.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2016-11-11T04:47:48.119Z,1478839668.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:48.515Z,1478839668.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2016-11-11T04:47:48.520Z,1478839668.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:48.924Z,1478839668.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2016-11-11T04:47:48.925Z,1478839668.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:49.361Z,1478839669.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2016-11-11T04:47:49.362Z,1478839669.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:49.720Z,1478839669.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2016-11-11T04:47:49.721Z,1478839669.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:50.124Z,1478839670.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2016-11-11T04:47:50.125Z,1478839670.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:50.528Z,1478839670.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2016-11-11T04:47:50.529Z,1478839670.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:50.917Z,1478839670.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2016-11-11T04:47:50.918Z,1478839670.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:51.337Z,1478839671.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2016-11-11T04:47:51.338Z,1478839671.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:51.494Z,1478839671.494 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T04:47:51.561Z,1478839671.561 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T04:47:51.563Z,1478839671.563 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T04:47:51.564Z,1478839671.564 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T04:47:51.565Z,1478839671.565 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T04:47:51.738Z,1478839671.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2016-11-11T04:47:51.744Z,1478839671.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:52.137Z,1478839672.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:52.533Z,1478839672.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:52.906Z,1478839672.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:53.329Z,1478839673.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:53.784Z,1478839673.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:54.110Z,1478839674.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:54.549Z,1478839674.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:54.913Z,1478839674.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:55.347Z,1478839675.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:55.750Z,1478839675.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:56.121Z,1478839676.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:47:56.548Z,1478839676.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:00.006Z,1478839680.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:00.149Z,1478839680.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:00.162Z,1478839680.161 [SBIT](IMPORTANT): SBIT PASSED
2016-11-11T04:48:00.503Z,1478839680.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:00.509Z,1478839680.509 [MissionManager](IMPORTANT): Started mission Startup
2016-11-11T04:48:00.509Z,1478839680.509 [Startup] Running Loop=1
2016-11-11T04:48:00.509Z,1478839680.509 [Startup](DEBUG): Aggregate::initialize Startup
2016-11-11T04:48:00.509Z,1478839680.509 [Startup:A.GoToSurface] Running Loop=1
2016-11-11T04:48:00.509Z,1478839680.509 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2016-11-11T04:48:00.510Z,1478839680.510 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2016-11-11T04:48:00.510Z,1478839680.510 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2016-11-11T04:48:00.511Z,1478839680.511 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2016-11-11T04:48:00.512Z,1478839680.511 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2016-11-11T04:48:00.512Z,1478839680.512 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2016-11-11T04:48:00.518Z,1478839680.518 [Startup:StartupSatComms] Running Loop=1
2016-11-11T04:48:00.518Z,1478839680.519 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2016-11-11T04:48:00.519Z,1478839680.519 [Startup:StartupSatComms:A] Running Loop=1
2016-11-11T04:48:00.836Z,1478839680.836 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003800
2016-11-11T04:48:00.897Z,1478839680.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:00.903Z,1478839680.903 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2016-11-11T04:48:01.322Z,1478839681.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:01.685Z,1478839681.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:02.088Z,1478839682.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:02.478Z,1478839682.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:02.882Z,1478839682.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:03.326Z,1478839683.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:03.685Z,1478839683.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:04.077Z,1478839684.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:04.512Z,1478839684.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:04.884Z,1478839684.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:05.321Z,1478839685.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:05.684Z,1478839685.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:06.082Z,1478839686.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:06.486Z,1478839686.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:06.885Z,1478839686.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:07.325Z,1478839687.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:07.697Z,1478839687.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:08.156Z,1478839688.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:08.473Z,1478839688.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:08.913Z,1478839688.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:09.333Z,1478839689.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:09.713Z,1478839689.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:10.113Z,1478839690.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:10.476Z,1478839690.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:10.876Z,1478839690.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:11.281Z,1478839691.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:11.685Z,1478839691.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:12.087Z,1478839692.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:12.478Z,1478839692.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:12.588Z,1478839692.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:48:12.877Z,1478839692.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:13.278Z,1478839693.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:13.384Z,1478839693.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:48:13.722Z,1478839693.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:14.080Z,1478839694.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:14.482Z,1478839694.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:14.889Z,1478839694.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:15.293Z,1478839695.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:15.713Z,1478839695.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:16.108Z,1478839696.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:16.509Z,1478839696.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:16.910Z,1478839696.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:17.335Z,1478839697.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:17.732Z,1478839697.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:18.103Z,1478839698.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:18.530Z,1478839698.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:18.882Z,1478839698.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:19.342Z,1478839699.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:19.701Z,1478839699.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:20.099Z,1478839700.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:20.524Z,1478839700.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:20.890Z,1478839700.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:21.366Z,1478839701.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:21.672Z,1478839701.672 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T04:48:21.672Z,1478839701.672 [BPC1] Data Fault, FailCount= 1
2016-11-11T04:48:21.672Z,1478839701.672 [BPC1](ERROR): Data Fault
2016-11-11T04:48:21.689Z,1478839701.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:21.781Z,1478839701.781 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T04:48:22.102Z,1478839702.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:22.504Z,1478839702.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:22.888Z,1478839702.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:22.904Z,1478839702.904 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T04:48:22.904Z,1478839702.904 [BPC1] No Fault, FailCount= 1
2016-11-11T04:48:23.401Z,1478839703.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:23.705Z,1478839703.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:24.081Z,1478839704.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:24.494Z,1478839704.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:24.915Z,1478839704.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:25.409Z,1478839705.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:25.704Z,1478839705.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:26.117Z,1478839706.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:26.482Z,1478839706.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:26.889Z,1478839706.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:27.296Z,1478839707.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:27.713Z,1478839707.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:28.085Z,1478839708.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:28.524Z,1478839708.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:28.889Z,1478839708.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:29.302Z,1478839709.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:29.691Z,1478839709.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:30.113Z,1478839710.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:30.498Z,1478839710.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:30.900Z,1478839710.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:31.334Z,1478839711.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:31.688Z,1478839711.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:32.108Z,1478839712.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:32.498Z,1478839712.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:32.900Z,1478839712.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:33.382Z,1478839713.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:33.698Z,1478839713.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:34.082Z,1478839714.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:34.501Z,1478839714.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:34.900Z,1478839714.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:35.310Z,1478839715.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:35.678Z,1478839715.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:36.173Z,1478839716.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:36.496Z,1478839716.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:36.909Z,1478839716.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:37.406Z,1478839717.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:37.713Z,1478839717.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:38.102Z,1478839718.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:38.529Z,1478839718.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:38.895Z,1478839718.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:39.335Z,1478839719.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:39.697Z,1478839719.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:40.105Z,1478839720.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:40.476Z,1478839720.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:40.911Z,1478839720.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:41.312Z,1478839721.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:41.722Z,1478839721.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:42.112Z,1478839722.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:42.493Z,1478839722.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:42.897Z,1478839722.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:43.296Z,1478839723.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:43.700Z,1478839723.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:44.093Z,1478839724.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:44.495Z,1478839724.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:44.898Z,1478839724.898 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:44.898Z,1478839724.898 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2016-11-11T04:48:44.898Z,1478839724.898 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T04:48:44.900Z,1478839724.900 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:44.900Z,1478839724.900 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2016-11-11T04:48:44.900Z,1478839724.900 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T04:48:44.905Z,1478839724.905 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:44.905Z,1478839724.905 [DeadReckonWithRespectToWater] Software Fault, FailCount= 1
2016-11-11T04:48:44.905Z,1478839724.905 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T04:48:44.907Z,1478839724.907 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:44.907Z,1478839724.907 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2016-11-11T04:48:44.907Z,1478839724.907 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T04:48:44.914Z,1478839724.914 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:44.914Z,1478839724.914 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2016-11-11T04:48:44.914Z,1478839724.914 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T04:48:44.976Z,1478839724.976 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T04:48:44.976Z,1478839724.976 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T04:48:44.976Z,1478839724.976 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T04:48:44.977Z,1478839724.977 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T04:48:44.977Z,1478839724.977 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T04:48:45.343Z,1478839725.342 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T04:48:45.343Z,1478839725.343 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2016-11-11T04:48:45.343Z,1478839725.343 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T04:48:45.343Z,1478839725.343 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2016-11-11T04:48:45.344Z,1478839725.344 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T04:48:45.344Z,1478839725.344 [DeadReckonWithRespectToWater] No Fault, FailCount= 1
2016-11-11T04:48:45.345Z,1478839725.345 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T04:48:45.345Z,1478839725.345 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2016-11-11T04:48:45.345Z,1478839725.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T04:48:45.345Z,1478839725.345 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2016-11-11T04:48:45.688Z,1478839725.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T04:48:45.689Z,1478839725.689 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:48:45.689Z,1478839725.689 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:48:45.690Z,1478839725.690 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T04:48:45.690Z,1478839725.690 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:48:45.691Z,1478839725.691 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:48:45.699Z,1478839725.699 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T04:48:45.700Z,1478839725.700 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:48:45.701Z,1478839725.701 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:48:45.701Z,1478839725.701 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T04:48:45.702Z,1478839725.702 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:48:45.702Z,1478839725.702 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:48:45.703Z,1478839725.703 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T04:48:45.727Z,1478839725.727 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:48:45.728Z,1478839725.728 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:48:46.079Z,1478839726.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:46.538Z,1478839726.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:46.917Z,1478839726.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:47.326Z,1478839727.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:47.696Z,1478839727.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:48.100Z,1478839728.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:48.508Z,1478839728.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:48.916Z,1478839728.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:49.301Z,1478839729.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:49.697Z,1478839729.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:50.149Z,1478839730.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:50.553Z,1478839730.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:50.898Z,1478839730.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:51.351Z,1478839731.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:51.711Z,1478839731.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:52.122Z,1478839732.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:52.532Z,1478839732.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:52.890Z,1478839732.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:53.318Z,1478839733.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:53.728Z,1478839733.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:54.107Z,1478839734.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:59.589Z,1478839739.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:48:59.709Z,1478839739.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:00.073Z,1478839740.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:00.473Z,1478839740.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:00.877Z,1478839740.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:00.903Z,1478839740.903 [Startup:StartupSatComms:A](INFO): Timed out from 2016-11-11T04:48:00.5Z
2016-11-11T04:49:00.904Z,1478839740.904 [Startup:StartupSatComms:A] Stopped
2016-11-11T04:49:00.904Z,1478839740.904 [Startup:StartupSatComms:B] Running Loop=1
2016-11-11T04:49:01.282Z,1478839741.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:01.297Z,1478839741.297 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2016-11-11T04:49:23.481Z,1478839763.481 [BPC1](ERROR): Failed to receive battery data
2016-11-11T04:49:23.481Z,1478839763.481 [BPC1] Communications Fault, FailCount= 1
2016-11-11T04:49:23.481Z,1478839763.481 [BPC1](ERROR): Communications Fault
2016-11-11T04:49:23.579Z,1478839763.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:23.645Z,1478839763.645 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T04:49:23.741Z,1478839763.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:30.171Z,1478839770.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:30.262Z,1478839770.262 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161110T164459/Courier0220.lzma
2016-11-11T04:49:30.370Z,1478839770.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:30.419Z,1478839770.419 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T04:49:30.419Z,1478839770.420 [BPC1] No Fault, FailCount= 1
2016-11-11T04:49:30.824Z,1478839770.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:31.050Z,1478839771.050 [DataOverHttps](INFO): Moved sent file to Logs/20161110T164459/Courier0220.lzma.bak
2016-11-11T04:49:31.050Z,1478839771.050 [DataOverHttps](INFO): SBD MOMSN=4554987
2016-11-11T04:49:31.207Z,1478839771.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:32.639Z,1478839772.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:32.770Z,1478839772.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:40.289Z,1478839780.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:40.440Z,1478839780.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:40.804Z,1478839780.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:41.261Z,1478839781.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:41.647Z,1478839781.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:42.009Z,1478839782.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:47.554Z,1478839787.554 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T04:49:47.554Z,1478839787.554 [Rowe_600LCM] Communications Fault, FailCount= 2
2016-11-11T04:49:47.554Z,1478839787.554 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T04:49:47.960Z,1478839787.960 [Rowe_600LCM](INFO): Powering down
2016-11-11T04:49:49.443Z,1478839789.443 [BPC1](ERROR): Failed to receive battery data
2016-11-11T04:49:49.443Z,1478839789.443 [BPC1] Communications Fault, FailCount= 2
2016-11-11T04:49:49.443Z,1478839789.443 [BPC1](ERROR): Communications Fault
2016-11-11T04:49:49.466Z,1478839789.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2016-11-11T04:49:49.467Z,1478839789.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:49.527Z,1478839789.527 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T04:49:49.528Z,1478839789.528 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T04:49:49.528Z,1478839789.528 [Rowe_600LCM] No Fault, FailCount= 2
2016-11-11T04:49:49.528Z,1478839789.528 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T04:49:49.542Z,1478839789.542 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20161110T164459/Courier0224.lzma
2016-11-11T04:49:49.576Z,1478839789.576 [Rowe_600LCM](INFO): Initializing
2016-11-11T04:49:49.576Z,1478839789.576 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T04:49:49.576Z,1478839789.576 [Rowe_600LCM](INFO): LCM OK
2016-11-11T04:49:49.576Z,1478839789.576 [Rowe_600LCM](INFO): Powering up
2016-11-11T04:49:49.673Z,1478839789.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2016-11-11T04:49:49.674Z,1478839789.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:50.022Z,1478839790.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T04:49:50.023Z,1478839790.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:50.338Z,1478839790.338 [DataOverHttps](INFO): Moved sent file to Logs/20161110T164459/Courier0224.lzma.bak
2016-11-11T04:49:50.338Z,1478839790.338 [DataOverHttps](INFO): SBD MOMSN=4554989
2016-11-11T04:49:50.417Z,1478839790.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T04:49:50.418Z,1478839790.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:50.477Z,1478839790.477 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T04:49:50.477Z,1478839790.477 [BPC1] No Fault, FailCount= 2
2016-11-11T04:49:52.217Z,1478839792.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2016-11-11T04:49:52.218Z,1478839792.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:52.398Z,1478839792.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T04:49:52.408Z,1478839792.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:49:53.872Z,1478839793.872 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T04:49:54.022Z,1478839794.022 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T04:49:54.024Z,1478839794.024 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T04:49:54.025Z,1478839794.025 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T04:49:54.026Z,1478839794.026 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T04:50:00.322Z,1478839800.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:00.544Z,1478839800.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:00.905Z,1478839800.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:00.916Z,1478839800.916 [Startup:StartupSatComms:B](INFO): Timed out from 2016-11-11T04:49:00.9Z
2016-11-11T04:50:00.916Z,1478839800.916 [Startup:StartupSatComms:B] Stopped
2016-11-11T04:50:00.916Z,1478839800.916 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2016-11-11T04:50:00.916Z,1478839800.916 [Startup:StartupSatComms] Stopped
2016-11-11T04:50:00.916Z,1478839800.916 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2016-11-11T04:50:00.917Z,1478839800.917 [Startup](INFO): Completed Startup
2016-11-11T04:50:00.918Z,1478839800.918 [Startup] Stopped
2016-11-11T04:50:00.918Z,1478839800.918 [Startup](DEBUG): Aggregate::uninitialize Startup
2016-11-11T04:50:00.918Z,1478839800.918 [Startup:A.GoToSurface] Stopped
2016-11-11T04:50:00.918Z,1478839800.918 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2016-11-11T04:50:01.305Z,1478839801.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:01.310Z,1478839801.310 [MissionManager](IMPORTANT): Started mission Default
2016-11-11T04:50:01.310Z,1478839801.310 [Default] Running Loop=1
2016-11-11T04:50:01.310Z,1478839801.310 [Default](DEBUG): Aggregate::initialize Default
2016-11-11T04:50:01.310Z,1478839801.310 [Default:B.GoToSurface] Running Loop=1
2016-11-11T04:50:01.310Z,1478839801.310 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2016-11-11T04:50:01.311Z,1478839801.311 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2016-11-11T04:50:01.327Z,1478839801.327 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2016-11-11T04:50:01.328Z,1478839801.328 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2016-11-11T04:50:01.328Z,1478839801.328 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2016-11-11T04:50:01.328Z,1478839801.328 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2016-11-11T04:50:01.329Z,1478839801.329 [Default:A.Wait] Running Loop=1
2016-11-11T04:50:01.329Z,1478839801.329 [Default:A.Wait](DEBUG): Initialize Wait Component.
2016-11-11T04:50:01.678Z,1478839801.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:02.135Z,1478839802.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:07.868Z,1478839807.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:07.905Z,1478839807.905 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20161111T044306/Courier0000.lzma
2016-11-11T04:50:08.005Z,1478839808.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:08.330Z,1478839808.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:11.184Z,1478839811.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:50:11.980Z,1478839811.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:50:26.849Z,1478839826.849 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044306/Courier0000.lzma.bak
2016-11-11T04:50:26.849Z,1478839826.849 [DataOverHttps](INFO): SBD MOMSN=4554991
2016-11-11T04:50:26.899Z,1478839826.899 [BPC1](ERROR): Failed to receive battery data
2016-11-11T04:50:26.900Z,1478839826.899 [BPC1] Communications Fault, FailCount= 3
2016-11-11T04:50:26.900Z,1478839826.900 [BPC1](ERROR): Communications Fault
2016-11-11T04:50:26.909Z,1478839826.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:26.916Z,1478839826.916 [Default:A.Wait](INFO): Done Waiting.
2016-11-11T04:50:26.916Z,1478839826.916 [Default:A.Wait] Stopped
2016-11-11T04:50:26.916Z,1478839826.916 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T04:50:26.931Z,1478839826.931 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T04:50:27.032Z,1478839827.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:27.037Z,1478839827.037 [Default:CheckIn] Running Loop=1
2016-11-11T04:50:27.037Z,1478839827.037 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T04:50:27.038Z,1478839827.038 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T04:50:27.381Z,1478839827.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:27.387Z,1478839827.387 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2016-11-11T04:50:27.925Z,1478839827.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:28.007Z,1478839828.007 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T04:50:28.007Z,1478839828.007 [BPC1] No Fault, FailCount= 3
2016-11-11T04:50:28.315Z,1478839828.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:28.678Z,1478839828.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:28.000Z,1478839829.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:29.416Z,1478839829.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:29.830Z,1478839829.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:30.197Z,1478839830.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:30.599Z,1478839830.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:30.990Z,1478839830.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:31.432Z,1478839831.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:31.802Z,1478839831.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:32.195Z,1478839832.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:32.601Z,1478839832.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:33.000Z,1478839833.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:33.414Z,1478839833.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:33.811Z,1478839833.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:34.212Z,1478839834.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:34.621Z,1478839834.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:35.024Z,1478839835.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:35.413Z,1478839835.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:35.830Z,1478839835.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:36.232Z,1478839836.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:36.596Z,1478839836.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:37.001Z,1478839837.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:37.402Z,1478839837.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:37.802Z,1478839837.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:38.209Z,1478839838.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:38.617Z,1478839838.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:39.062Z,1478839839.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:39.401Z,1478839839.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:39.840Z,1478839839.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:40.213Z,1478839840.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:40.645Z,1478839840.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:41.022Z,1478839841.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:41.389Z,1478839841.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:41.820Z,1478839841.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:42.226Z,1478839842.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:42.596Z,1478839842.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:43.004Z,1478839843.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:43.401Z,1478839843.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:43.798Z,1478839843.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:44.202Z,1478839844.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:44.609Z,1478839844.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:45.008Z,1478839845.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:45.417Z,1478839845.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:45.826Z,1478839845.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:46.186Z,1478839846.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:46.617Z,1478839846.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:46.000Z,1478839847.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:47.392Z,1478839847.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:47.797Z,1478839847.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:48.209Z,1478839848.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:48.618Z,1478839848.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:49.018Z,1478839849.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:49.399Z,1478839849.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:49.796Z,1478839849.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:50.196Z,1478839850.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:50.600Z,1478839850.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:51.013Z,1478839851.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:51.481Z,1478839851.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:51.814Z,1478839851.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:52.209Z,1478839852.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:52.605Z,1478839852.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:53.073Z,1478839853.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:53.458Z,1478839853.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:53.820Z,1478839853.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:54.198Z,1478839854.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:54.596Z,1478839854.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:55.025Z,1478839855.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:55.407Z,1478839855.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:55.791Z,1478839855.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:56.199Z,1478839856.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:56.609Z,1478839856.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:57.012Z,1478839857.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:57.419Z,1478839857.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:57.820Z,1478839857.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:58.226Z,1478839858.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:58.620Z,1478839858.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:59.001Z,1478839859.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:59.385Z,1478839859.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:50:59.799Z,1478839859.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:00.197Z,1478839860.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:00.545Z,1478839860.545 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T04:51:00.624Z,1478839860.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:01.001Z,1478839861.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:01.414Z,1478839861.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:01.786Z,1478839861.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:02.222Z,1478839862.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:09.544Z,1478839869.544 [BPC1](ERROR): Failed to receive battery data
2016-11-11T04:51:09.544Z,1478839869.544 [BPC1] Communications Fault, FailCount= 1
2016-11-11T04:51:09.544Z,1478839869.544 [BPC1](ERROR): Communications Fault
2016-11-11T04:51:09.588Z,1478839869.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:09.635Z,1478839869.635 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T04:51:09.771Z,1478839869.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:10.143Z,1478839870.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:10.532Z,1478839870.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:10.586Z,1478839870.586 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T04:51:10.586Z,1478839870.586 [BPC1] No Fault, FailCount= 1
2016-11-11T04:51:11.005Z,1478839871.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:11.379Z,1478839871.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:11.740Z,1478839871.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:12.139Z,1478839872.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:12.525Z,1478839872.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:12.928Z,1478839872.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:13.324Z,1478839873.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:13.738Z,1478839873.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:14.138Z,1478839874.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:14.549Z,1478839874.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:14.948Z,1478839874.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:15.357Z,1478839875.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:15.734Z,1478839875.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:16.128Z,1478839876.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:16.541Z,1478839876.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:16.929Z,1478839876.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:17.335Z,1478839877.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:17.745Z,1478839877.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:18.150Z,1478839878.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:18.548Z,1478839878.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:18.914Z,1478839878.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:19.329Z,1478839879.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:19.737Z,1478839879.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:20.138Z,1478839880.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:20.543Z,1478839880.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:20.942Z,1478839880.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:21.355Z,1478839881.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:21.736Z,1478839881.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:22.188Z,1478839882.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:22.521Z,1478839882.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:22.958Z,1478839882.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:23.338Z,1478839883.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:23.754Z,1478839883.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:24.174Z,1478839884.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:24.530Z,1478839884.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:24.923Z,1478839884.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:25.343Z,1478839885.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:25.721Z,1478839885.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:26.128Z,1478839886.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:26.560Z,1478839886.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:26.929Z,1478839886.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:27.345Z,1478839887.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:27.729Z,1478839887.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:28.144Z,1478839888.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:28.547Z,1478839888.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:28.957Z,1478839888.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:29.336Z,1478839889.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:29.745Z,1478839889.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:30.138Z,1478839890.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:30.527Z,1478839890.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:30.933Z,1478839890.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:31.352Z,1478839891.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:31.718Z,1478839891.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:32.154Z,1478839892.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:32.535Z,1478839892.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:32.934Z,1478839892.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:33.368Z,1478839893.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:33.726Z,1478839893.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:34.132Z,1478839894.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:34.532Z,1478839894.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:35.009Z,1478839895.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:35.353Z,1478839895.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:35.753Z,1478839895.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:36.124Z,1478839896.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:36.533Z,1478839896.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:36.958Z,1478839896.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:37.342Z,1478839897.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:37.746Z,1478839897.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:38.139Z,1478839898.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:38.541Z,1478839898.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:38.948Z,1478839898.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:39.327Z,1478839899.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:39.729Z,1478839899.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:40.138Z,1478839900.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:40.541Z,1478839900.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:40.936Z,1478839900.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:41.322Z,1478839901.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:41.729Z,1478839901.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:42.132Z,1478839902.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:42.535Z,1478839902.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:42.933Z,1478839902.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:43.330Z,1478839903.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:43.736Z,1478839903.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:44.141Z,1478839904.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:44.540Z,1478839904.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:44.949Z,1478839904.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:45.334Z,1478839905.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:45.737Z,1478839905.737 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:45.737Z,1478839905.737 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2016-11-11T04:51:45.737Z,1478839905.737 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T04:51:45.748Z,1478839905.748 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:45.748Z,1478839905.748 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2016-11-11T04:51:45.748Z,1478839905.748 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T04:51:45.750Z,1478839905.750 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:45.750Z,1478839905.750 [DeadReckonWithRespectToWater] Software Fault, FailCount= 2
2016-11-11T04:51:45.750Z,1478839905.750 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T04:51:45.766Z,1478839905.766 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:45.766Z,1478839905.766 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2016-11-11T04:51:45.766Z,1478839905.766 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T04:51:45.776Z,1478839905.776 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:45.776Z,1478839905.776 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2016-11-11T04:51:45.776Z,1478839905.776 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T04:51:45.827Z,1478839905.827 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T04:51:45.827Z,1478839905.828 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T04:51:45.828Z,1478839905.828 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T04:51:45.828Z,1478839905.828 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T04:51:45.828Z,1478839905.828 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T04:51:46.190Z,1478839906.190 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T04:51:46.190Z,1478839906.190 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2016-11-11T04:51:46.190Z,1478839906.190 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T04:51:46.190Z,1478839906.190 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2016-11-11T04:51:46.199Z,1478839906.199 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T04:51:46.199Z,1478839906.199 [DeadReckonWithRespectToWater] No Fault, FailCount= 2
2016-11-11T04:51:46.200Z,1478839906.200 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T04:51:46.200Z,1478839906.200 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2016-11-11T04:51:46.201Z,1478839906.201 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T04:51:46.201Z,1478839906.201 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2016-11-11T04:51:46.530Z,1478839906.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T04:51:46.531Z,1478839906.531 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:51:46.563Z,1478839906.563 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:51:46.564Z,1478839906.564 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T04:51:46.564Z,1478839906.564 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:51:46.564Z,1478839906.565 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:51:46.565Z,1478839906.565 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T04:51:46.565Z,1478839906.565 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:51:46.566Z,1478839906.566 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:51:46.566Z,1478839906.566 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T04:51:46.567Z,1478839906.567 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:51:46.567Z,1478839906.567 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:51:46.582Z,1478839906.582 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T04:51:46.582Z,1478839906.582 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:51:46.582Z,1478839906.582 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:51:46.946Z,1478839906.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:47.378Z,1478839907.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:47.762Z,1478839907.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:48.132Z,1478839908.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:48.569Z,1478839908.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:48.947Z,1478839908.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:49.333Z,1478839909.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:49.753Z,1478839909.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:49.931Z,1478839909.931 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T04:51:49.931Z,1478839909.931 [Rowe_600LCM] Communications Fault, FailCount= 3
2016-11-11T04:51:49.931Z,1478839909.931 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T04:51:50.144Z,1478839910.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T04:51:50.145Z,1478839910.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:50.195Z,1478839910.195 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T04:51:50.335Z,1478839910.335 [Rowe_600LCM](INFO): Powering down
2016-11-11T04:51:50.547Z,1478839910.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T04:51:50.552Z,1478839910.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:50.953Z,1478839910.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T04:51:50.954Z,1478839910.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:51.333Z,1478839911.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T04:51:51.333Z,1478839911.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:51.718Z,1478839911.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T04:51:51.724Z,1478839911.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:51.799Z,1478839911.799 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T04:51:51.799Z,1478839911.799 [Rowe_600LCM] No Fault, FailCount= 3
2016-11-11T04:51:51.951Z,1478839911.951 [Rowe_600LCM](INFO): Initializing
2016-11-11T04:51:51.952Z,1478839911.952 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T04:51:51.952Z,1478839911.952 [Rowe_600LCM](INFO): LCM OK
2016-11-11T04:51:51.952Z,1478839911.952 [Rowe_600LCM](INFO): Powering up
2016-11-11T04:51:52.133Z,1478839912.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T04:51:52.134Z,1478839912.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:52.540Z,1478839912.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T04:51:52.542Z,1478839912.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:52.937Z,1478839912.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T04:51:52.938Z,1478839912.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:53.345Z,1478839913.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T04:51:53.346Z,1478839913.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:53.742Z,1478839913.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T04:51:53.743Z,1478839913.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:54.122Z,1478839914.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T04:51:54.123Z,1478839914.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:54.538Z,1478839914.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T04:51:54.547Z,1478839914.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:54.965Z,1478839914.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T04:51:54.966Z,1478839914.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:55.326Z,1478839915.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T04:51:55.331Z,1478839915.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:55.706Z,1478839915.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T04:51:55.732Z,1478839915.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:56.147Z,1478839916.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T04:51:56.149Z,1478839916.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:56.286Z,1478839916.286 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T04:51:56.402Z,1478839916.402 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T04:51:56.404Z,1478839916.404 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T04:51:56.405Z,1478839916.405 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T04:51:56.406Z,1478839916.406 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T04:51:56.555Z,1478839916.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T04:51:56.564Z,1478839916.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:56.961Z,1478839916.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:57.329Z,1478839917.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:57.723Z,1478839917.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:58.142Z,1478839918.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:58.538Z,1478839918.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:58.930Z,1478839918.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:59.339Z,1478839919.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:51:59.725Z,1478839919.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:00.118Z,1478839920.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:00.594Z,1478839920.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:00.938Z,1478839920.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:01.329Z,1478839921.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:01.737Z,1478839921.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:02.149Z,1478839922.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:02.562Z,1478839922.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:10.212Z,1478839930.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:10.391Z,1478839930.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:10.769Z,1478839930.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:11.184Z,1478839931.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:11.549Z,1478839931.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:11.947Z,1478839931.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:12.397Z,1478839932.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:12.757Z,1478839932.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:13.206Z,1478839933.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:13.525Z,1478839933.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:13.951Z,1478839933.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:14.329Z,1478839934.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:14.762Z,1478839934.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:15.164Z,1478839935.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:15.587Z,1478839935.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:15.962Z,1478839935.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:16.380Z,1478839936.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:16.770Z,1478839936.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:17.157Z,1478839937.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:17.550Z,1478839937.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:17.950Z,1478839937.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:18.357Z,1478839938.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:18.758Z,1478839938.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:19.156Z,1478839939.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:19.537Z,1478839939.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:19.950Z,1478839939.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:20.364Z,1478839940.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:20.753Z,1478839940.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:21.168Z,1478839941.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:21.566Z,1478839941.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:21.943Z,1478839941.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:22.430Z,1478839942.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:22.743Z,1478839942.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:23.160Z,1478839943.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:23.544Z,1478839943.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:23.946Z,1478839943.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:24.357Z,1478839944.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:24.764Z,1478839944.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:25.164Z,1478839945.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:25.533Z,1478839945.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:25.937Z,1478839945.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:26.333Z,1478839946.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:26.732Z,1478839946.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:27.136Z,1478839947.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:27.567Z,1478839947.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:27.941Z,1478839947.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:28.341Z,1478839948.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:28.750Z,1478839948.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:29.140Z,1478839949.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:29.561Z,1478839949.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:29.938Z,1478839949.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:30.382Z,1478839950.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:30.793Z,1478839950.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:31.146Z,1478839951.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:31.544Z,1478839951.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:31.938Z,1478839951.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:32.333Z,1478839952.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:32.741Z,1478839952.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:33.138Z,1478839953.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:33.553Z,1478839953.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:33.952Z,1478839953.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:34.357Z,1478839954.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:34.743Z,1478839954.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:35.144Z,1478839955.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:35.556Z,1478839955.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:35.933Z,1478839955.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:36.337Z,1478839956.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:36.761Z,1478839956.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:37.158Z,1478839957.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:37.533Z,1478839957.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:37.933Z,1478839957.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:38.334Z,1478839958.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:38.758Z,1478839958.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:39.141Z,1478839959.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:39.555Z,1478839959.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:39.973Z,1478839959.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:40.354Z,1478839960.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:40.741Z,1478839960.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:41.153Z,1478839961.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:41.542Z,1478839961.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:41.945Z,1478839961.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:42.323Z,1478839962.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:42.351Z,1478839962.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:42.728Z,1478839962.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:42.858Z,1478839962.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:43.120Z,1478839963.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:43.155Z,1478839963.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:43.557Z,1478839963.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:43.925Z,1478839963.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:44.365Z,1478839964.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:44.710Z,1478839964.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:44.757Z,1478839964.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:45.107Z,1478839965.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:45.143Z,1478839965.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:45.533Z,1478839965.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:45.561Z,1478839965.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:45.924Z,1478839965.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:45.957Z,1478839965.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:46.324Z,1478839966.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:46.356Z,1478839966.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:46.710Z,1478839966.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:46.757Z,1478839966.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:47.117Z,1478839967.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:47.124Z,1478839967.124 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2016-11-11T04:52:47.220Z,1478839967.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:47.516Z,1478839967.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:47.536Z,1478839967.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:47.917Z,1478839967.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:47.941Z,1478839967.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:48.326Z,1478839968.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:48.345Z,1478839968.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:48.722Z,1478839968.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:48.770Z,1478839968.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:49.124Z,1478839969.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:49.170Z,1478839969.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:49.514Z,1478839969.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:49.529Z,1478839969.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:49.913Z,1478839969.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:49.932Z,1478839969.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:50.318Z,1478839970.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:50.334Z,1478839970.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:50.719Z,1478839970.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:50.734Z,1478839970.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:51.107Z,1478839971.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:51.133Z,1478839971.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:51.534Z,1478839971.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:51.554Z,1478839971.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:51.928Z,1478839971.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:51.960Z,1478839971.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:52.327Z,1478839972.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:52.343Z,1478839972.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:52.706Z,1478839972.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:52.741Z,1478839972.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:53.106Z,1478839973.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:53.141Z,1478839973.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:53.509Z,1478839973.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:53.516Z,1478839973.516 [PNI_TCM](ERROR): CRC does not match. Expected:0x59152 got:0x7
2016-11-11T04:52:53.545Z,1478839973.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:53.911Z,1478839973.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:53.941Z,1478839973.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:54.329Z,1478839974.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:54.349Z,1478839974.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:54.725Z,1478839974.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:54.748Z,1478839974.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:55.120Z,1478839975.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:55.149Z,1478839975.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:55.510Z,1478839975.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:55.553Z,1478839975.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:55.909Z,1478839975.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:55.929Z,1478839975.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:56.311Z,1478839976.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:56.327Z,1478839976.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:56.714Z,1478839976.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:56.773Z,1478839976.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:57.107Z,1478839977.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:57.141Z,1478839977.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:57.527Z,1478839977.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:57.543Z,1478839977.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:57.933Z,1478839977.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:57.984Z,1478839977.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:58.327Z,1478839978.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:58.343Z,1478839978.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:58.706Z,1478839978.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:58.761Z,1478839978.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:59.106Z,1478839979.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:59.161Z,1478839979.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:59.509Z,1478839979.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:59.537Z,1478839979.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:52:59.908Z,1478839979.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:52:59.932Z,1478839979.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:00.320Z,1478839980.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:00.349Z,1478839980.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:00.720Z,1478839980.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:00.746Z,1478839980.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:01.165Z,1478839981.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:01.206Z,1478839981.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:01.511Z,1478839981.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:01.526Z,1478839981.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:01.909Z,1478839981.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:01.929Z,1478839981.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:02.309Z,1478839982.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:02.329Z,1478839982.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:02.719Z,1478839982.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:02.734Z,1478839982.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:06.136Z,1478839986.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:06.161Z,1478839986.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:06.272Z,1478839986.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:06.312Z,1478839986.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:06.624Z,1478839986.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:06.660Z,1478839986.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:07.036Z,1478839987.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:07.069Z,1478839987.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:07.413Z,1478839987.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:07.441Z,1478839987.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:07.817Z,1478839987.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:07.832Z,1478839987.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:08.212Z,1478839988.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:08.240Z,1478839988.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:08.615Z,1478839988.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:08.637Z,1478839988.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:09.025Z,1478839989.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:09.041Z,1478839989.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:09.426Z,1478839989.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:09.454Z,1478839989.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:09.830Z,1478839989.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:09.846Z,1478839989.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:10.231Z,1478839990.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:10.255Z,1478839990.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:10.610Z,1478839990.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:10.646Z,1478839990.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:11.025Z,1478839991.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:11.085Z,1478839991.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:11.415Z,1478839991.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:11.458Z,1478839991.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:11.814Z,1478839991.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:11.842Z,1478839991.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:12.225Z,1478839992.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:12.314Z,1478839992.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:12.629Z,1478839992.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:12.668Z,1478839992.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:13.026Z,1478839993.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:13.097Z,1478839993.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:13.433Z,1478839993.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:13.505Z,1478839993.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:13.816Z,1478839993.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:13.881Z,1478839993.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:14.213Z,1478839994.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:14.257Z,1478839994.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:14.625Z,1478839994.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:14.669Z,1478839994.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:15.021Z,1478839995.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:15.056Z,1478839995.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:15.427Z,1478839995.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:15.472Z,1478839995.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:15.827Z,1478839995.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:15.874Z,1478839995.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:16.221Z,1478839996.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:16.267Z,1478839996.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:16.612Z,1478839996.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:16.668Z,1478839996.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:17.012Z,1478839997.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:17.061Z,1478839997.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:17.412Z,1478839997.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:17.460Z,1478839997.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:17.865Z,1478839997.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:18.276Z,1478839998.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:18.683Z,1478839998.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:19.026Z,1478839999.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:19.069Z,1478839999.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:19.412Z,1478839999.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:19.466Z,1478839999.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:19.809Z,1478839999.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:19.825Z,1478839999.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:20.236Z,1478840000.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:20.261Z,1478840000.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:20.641Z,1478840000.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:20.670Z,1478840000.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:21.042Z,1478840001.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:21.070Z,1478840001.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:21.451Z,1478840001.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:21.469Z,1478840001.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:21.837Z,1478840001.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:21.878Z,1478840001.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:22.253Z,1478840002.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:22.271Z,1478840002.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:22.614Z,1478840002.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:22.661Z,1478840002.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:23.021Z,1478840003.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:23.074Z,1478840003.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:23.418Z,1478840003.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:23.481Z,1478840003.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:23.814Z,1478840003.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:23.837Z,1478840003.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:24.246Z,1478840004.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:24.270Z,1478840004.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:24.624Z,1478840004.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:24.660Z,1478840004.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:25.028Z,1478840005.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:25.060Z,1478840005.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:25.410Z,1478840005.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:25.485Z,1478840005.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:25.814Z,1478840005.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:25.896Z,1478840005.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:26.210Z,1478840006.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:26.228Z,1478840006.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:26.611Z,1478840006.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:26.665Z,1478840006.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:27.017Z,1478840007.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:53:27.053Z,1478840007.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:27.486Z,1478840007.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:27.877Z,1478840007.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:28.266Z,1478840008.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:28.628Z,1478840008.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:29.030Z,1478840009.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:29.440Z,1478840009.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:29.842Z,1478840009.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:30.242Z,1478840010.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:30.644Z,1478840010.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:31.049Z,1478840011.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:31.453Z,1478840011.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:31.880Z,1478840011.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:32.275Z,1478840012.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:32.644Z,1478840012.644 [PNI_TCM](ERROR): CRC does not match. Expected:0x33144 got:0x16384
2016-11-11T04:53:32.778Z,1478840012.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:33.060Z,1478840013.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:33.455Z,1478840013.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:33.858Z,1478840013.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:34.260Z,1478840014.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:34.656Z,1478840014.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:35.039Z,1478840015.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:35.441Z,1478840015.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:35.845Z,1478840015.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:36.266Z,1478840016.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:36.644Z,1478840016.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:37.049Z,1478840017.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:37.450Z,1478840017.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:37.877Z,1478840017.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:38.239Z,1478840018.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:38.638Z,1478840018.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:39.054Z,1478840019.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:39.473Z,1478840019.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:39.851Z,1478840019.851 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T04:53:39.877Z,1478840019.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:40.285Z,1478840020.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:40.636Z,1478840020.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:41.053Z,1478840021.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:41.485Z,1478840021.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:41.841Z,1478840021.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:42.273Z,1478840022.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:42.689Z,1478840022.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:43.036Z,1478840023.036 [PNI_TCM](ERROR): CRC does not match. Expected:0x46182 got:0x1857
2016-11-11T04:53:43.142Z,1478840023.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:43.438Z,1478840023.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:43.837Z,1478840023.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:44.253Z,1478840024.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:44.630Z,1478840024.630 [PNI_TCM](ERROR): CRC does not match. Expected:0x12278 got:0x49016
2016-11-11T04:53:44.657Z,1478840024.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:45.045Z,1478840025.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:45.454Z,1478840025.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:45.851Z,1478840025.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:46.249Z,1478840026.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:46.644Z,1478840026.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:47.052Z,1478840027.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:47.453Z,1478840027.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:47.833Z,1478840027.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:48.259Z,1478840028.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:48.654Z,1478840028.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:49.065Z,1478840029.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:49.462Z,1478840029.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:49.842Z,1478840029.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:50.241Z,1478840030.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:50.640Z,1478840030.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:51.046Z,1478840031.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:51.452Z,1478840031.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:51.851Z,1478840031.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:52.260Z,1478840032.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:52.651Z,1478840032.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:52.720Z,1478840032.720 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T04:53:52.720Z,1478840032.720 [Rowe_600LCM] Communications Fault, FailCount= 4
2016-11-11T04:53:52.720Z,1478840032.720 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T04:53:53.037Z,1478840033.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T04:53:53.038Z,1478840033.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:53.083Z,1478840033.083 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T04:53:53.123Z,1478840033.123 [Rowe_600LCM](INFO): Powering down
2016-11-11T04:53:53.430Z,1478840033.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T04:53:53.431Z,1478840033.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:53.845Z,1478840033.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T04:53:53.846Z,1478840033.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:53.932Z,1478840033.931 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2016-11-11T04:53:53.932Z,1478840033.932 [Rowe_600LCM] Hardware Fault, FailCount= 4
2016-11-11T04:53:53.932Z,1478840033.932 [Rowe_600LCM](ERROR): Hardware Fault
2016-11-11T04:53:54.233Z,1478840034.233 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T04:53:54.233Z,1478840034.233 [BPC1] Data Fault, FailCount= 1
2016-11-11T04:53:54.234Z,1478840034.234 [BPC1](ERROR): Data Fault
2016-11-11T04:53:54.242Z,1478840034.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T04:53:54.243Z,1478840034.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:54.280Z,1478840034.280 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T04:53:54.649Z,1478840034.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T04:53:54.650Z,1478840034.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:54.691Z,1478840034.691 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T04:53:54.691Z,1478840034.691 [Rowe_600LCM] No Fault, FailCount= 4
2016-11-11T04:53:54.739Z,1478840034.739 [Rowe_600LCM](INFO): Initializing
2016-11-11T04:53:54.740Z,1478840034.740 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T04:53:54.740Z,1478840034.740 [Rowe_600LCM](INFO): LCM OK
2016-11-11T04:53:54.740Z,1478840034.740 [Rowe_600LCM](INFO): Powering up
2016-11-11T04:53:55.052Z,1478840035.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T04:53:55.053Z,1478840035.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:55.441Z,1478840035.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T04:53:55.442Z,1478840035.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:55.458Z,1478840035.458 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T04:53:55.458Z,1478840035.458 [BPC1] No Fault, FailCount= 1
2016-11-11T04:53:55.896Z,1478840035.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T04:53:55.897Z,1478840035.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:56.258Z,1478840036.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T04:53:56.259Z,1478840036.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:56.644Z,1478840036.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T04:53:56.646Z,1478840036.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:57.042Z,1478840037.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T04:53:57.043Z,1478840037.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:57.452Z,1478840037.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T04:53:57.453Z,1478840037.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:57.847Z,1478840037.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T04:53:57.848Z,1478840037.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:58.251Z,1478840038.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T04:53:58.252Z,1478840038.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:58.645Z,1478840038.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T04:53:58.646Z,1478840038.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:58.862Z,1478840038.862 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T04:53:58.926Z,1478840038.926 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T04:53:58.927Z,1478840038.927 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T04:53:58.928Z,1478840038.928 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T04:53:58.929Z,1478840038.929 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T04:53:59.050Z,1478840039.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T04:53:59.057Z,1478840039.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:59.444Z,1478840039.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:53:59.899Z,1478840039.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:00.247Z,1478840040.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:00.647Z,1478840040.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:01.053Z,1478840041.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:01.442Z,1478840041.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:01.845Z,1478840041.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:02.244Z,1478840042.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:02.644Z,1478840042.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:03.026Z,1478840043.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:06.409Z,1478840046.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:06.549Z,1478840046.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:06.914Z,1478840046.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:07.309Z,1478840047.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:07.685Z,1478840047.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:08.081Z,1478840048.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:08.556Z,1478840048.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:08.882Z,1478840048.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:09.328Z,1478840049.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:09.701Z,1478840049.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:10.132Z,1478840050.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:10.525Z,1478840050.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:10.892Z,1478840050.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:11.287Z,1478840051.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:11.689Z,1478840051.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:12.101Z,1478840052.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:12.497Z,1478840052.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:12.895Z,1478840052.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:13.300Z,1478840053.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:13.682Z,1478840053.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:14.091Z,1478840054.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:14.494Z,1478840054.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:14.890Z,1478840054.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:15.307Z,1478840055.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:15.699Z,1478840055.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:16.104Z,1478840056.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:16.473Z,1478840056.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:16.906Z,1478840056.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:17.274Z,1478840057.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:17.678Z,1478840057.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:18.100Z,1478840058.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:18.488Z,1478840058.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:18.917Z,1478840058.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:19.289Z,1478840059.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:19.683Z,1478840059.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:20.086Z,1478840060.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:20.489Z,1478840060.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:20.882Z,1478840060.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:21.295Z,1478840061.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:21.701Z,1478840061.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:22.094Z,1478840062.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:22.529Z,1478840062.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:22.938Z,1478840062.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:23.287Z,1478840063.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:23.739Z,1478840063.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:24.101Z,1478840064.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:24.533Z,1478840064.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:24.903Z,1478840064.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:25.314Z,1478840065.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:25.681Z,1478840065.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:26.073Z,1478840066.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:26.474Z,1478840066.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:26.877Z,1478840066.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:27.309Z,1478840067.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:27.705Z,1478840067.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:28.107Z,1478840068.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:28.481Z,1478840068.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:28.881Z,1478840068.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:29.293Z,1478840069.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:29.681Z,1478840069.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:30.093Z,1478840070.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:30.491Z,1478840070.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:30.893Z,1478840070.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:31.290Z,1478840071.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:31.682Z,1478840071.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:32.086Z,1478840072.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:32.491Z,1478840072.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:32.893Z,1478840072.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:33.294Z,1478840073.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:33.694Z,1478840073.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:34.094Z,1478840074.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:34.486Z,1478840074.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:34.897Z,1478840074.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:35.291Z,1478840075.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:35.686Z,1478840075.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:36.098Z,1478840076.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:36.495Z,1478840076.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:36.901Z,1478840076.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:37.340Z,1478840077.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:37.682Z,1478840077.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:38.110Z,1478840078.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:38.497Z,1478840078.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:38.913Z,1478840078.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:39.340Z,1478840079.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:39.705Z,1478840079.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:40.099Z,1478840080.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:40.248Z,1478840080.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:40.473Z,1478840080.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:40.873Z,1478840080.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:41.044Z,1478840081.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:41.285Z,1478840081.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:41.448Z,1478840081.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:41.689Z,1478840081.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:42.093Z,1478840082.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:42.244Z,1478840082.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:42.494Z,1478840082.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:42.897Z,1478840082.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:43.040Z,1478840083.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:43.292Z,1478840083.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:43.444Z,1478840083.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:43.682Z,1478840083.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:44.090Z,1478840084.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:44.240Z,1478840084.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:44.493Z,1478840084.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:44.882Z,1478840084.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:45.036Z,1478840085.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:45.294Z,1478840085.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:45.440Z,1478840085.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:45.701Z,1478840085.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:46.094Z,1478840086.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:46.236Z,1478840086.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:46.486Z,1478840086.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:46.893Z,1478840086.893 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:46.893Z,1478840086.893 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2016-11-11T04:54:46.893Z,1478840086.893 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T04:54:46.896Z,1478840086.895 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:46.896Z,1478840086.896 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2016-11-11T04:54:46.896Z,1478840086.896 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T04:54:46.898Z,1478840086.898 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:46.898Z,1478840086.898 [DeadReckonWithRespectToWater] Software Fault, FailCount= 3
2016-11-11T04:54:46.898Z,1478840086.898 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T04:54:46.900Z,1478840086.900 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:46.900Z,1478840086.900 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2016-11-11T04:54:46.900Z,1478840086.900 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T04:54:46.902Z,1478840086.902 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:46.902Z,1478840086.902 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2016-11-11T04:54:46.902Z,1478840086.902 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T04:54:46.942Z,1478840086.941 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T04:54:46.942Z,1478840086.942 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T04:54:46.942Z,1478840086.942 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T04:54:46.942Z,1478840086.942 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T04:54:46.942Z,1478840086.943 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T04:54:47.032Z,1478840087.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:47.315Z,1478840087.315 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T04:54:47.315Z,1478840087.316 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2016-11-11T04:54:47.316Z,1478840087.316 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T04:54:47.316Z,1478840087.316 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2016-11-11T04:54:47.317Z,1478840087.317 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T04:54:47.317Z,1478840087.317 [DeadReckonWithRespectToWater] No Fault, FailCount= 3
2016-11-11T04:54:47.317Z,1478840087.317 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T04:54:47.317Z,1478840087.318 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2016-11-11T04:54:47.318Z,1478840087.318 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T04:54:47.318Z,1478840087.318 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2016-11-11T04:54:47.436Z,1478840087.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:47.697Z,1478840087.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T04:54:47.698Z,1478840087.698 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:54:47.698Z,1478840087.698 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:54:47.699Z,1478840087.699 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T04:54:47.700Z,1478840087.700 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:54:47.701Z,1478840087.701 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:54:47.701Z,1478840087.701 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T04:54:47.702Z,1478840087.702 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:54:47.702Z,1478840087.702 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:54:47.703Z,1478840087.703 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T04:54:47.704Z,1478840087.704 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:54:47.704Z,1478840087.704 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:54:47.704Z,1478840087.704 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T04:54:47.705Z,1478840087.705 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:54:47.705Z,1478840087.705 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:54:48.109Z,1478840088.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:48.232Z,1478840088.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:48.507Z,1478840088.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:48.912Z,1478840088.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:49.028Z,1478840089.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:49.285Z,1478840089.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:49.432Z,1478840089.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:49.683Z,1478840089.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:50.085Z,1478840090.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:50.228Z,1478840090.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:50.485Z,1478840090.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:50.890Z,1478840090.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:51.024Z,1478840091.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:51.323Z,1478840091.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:51.428Z,1478840091.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:51.737Z,1478840091.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:52.100Z,1478840092.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:52.224Z,1478840092.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:52.505Z,1478840092.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:52.894Z,1478840092.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:53.022Z,1478840093.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:53.298Z,1478840093.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:53.428Z,1478840093.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:53.707Z,1478840093.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:54.100Z,1478840094.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:54.224Z,1478840094.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:54.502Z,1478840094.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:54.897Z,1478840094.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:55.020Z,1478840095.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:55.306Z,1478840095.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:55.424Z,1478840095.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:55.673Z,1478840095.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:56.077Z,1478840096.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:56.220Z,1478840096.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:56.474Z,1478840096.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:56.880Z,1478840096.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:57.016Z,1478840097.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:57.310Z,1478840097.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:57.420Z,1478840097.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:57.707Z,1478840097.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:58.088Z,1478840098.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:58.216Z,1478840098.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:58.485Z,1478840098.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:58.886Z,1478840098.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:59.012Z,1478840099.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:59.285Z,1478840099.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:54:59.420Z,1478840099.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:54:59.685Z,1478840099.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:00.094Z,1478840100.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:00.216Z,1478840100.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:00.492Z,1478840100.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:00.920Z,1478840100.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:01.012Z,1478840101.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:01.300Z,1478840101.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:01.416Z,1478840101.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:01.695Z,1478840101.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:02.089Z,1478840102.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:02.212Z,1478840102.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:02.485Z,1478840102.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:02.881Z,1478840102.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:03.011Z,1478840103.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:03.299Z,1478840103.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:03.416Z,1478840103.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:04.214Z,1478840104.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:05.008Z,1478840105.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:05.412Z,1478840105.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:06.208Z,1478840106.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:06.805Z,1478840106.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:06.913Z,1478840106.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:07.004Z,1478840107.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:07.309Z,1478840107.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:07.408Z,1478840107.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:07.710Z,1478840107.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:08.097Z,1478840108.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:08.204Z,1478840108.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:08.513Z,1478840108.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:08.925Z,1478840108.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:08.000Z,1478840109.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:09.304Z,1478840109.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:09.404Z,1478840109.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:09.710Z,1478840109.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:10.111Z,1478840110.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:10.200Z,1478840110.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:10.497Z,1478840110.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:10.897Z,1478840110.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:10.996Z,1478840110.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:11.289Z,1478840111.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:11.416Z,1478840111.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:11.688Z,1478840111.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:12.117Z,1478840112.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:12.212Z,1478840112.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:12.486Z,1478840112.486 [PNI_TCM](ERROR): CRC does not match. Expected:0x43255 got:0x49153
2016-11-11T04:55:12.517Z,1478840112.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:12.917Z,1478840112.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:13.008Z,1478840113.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:13.291Z,1478840113.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:13.420Z,1478840113.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:13.705Z,1478840113.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:14.097Z,1478840114.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:14.216Z,1478840114.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:14.493Z,1478840114.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:14.894Z,1478840114.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:15.012Z,1478840115.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:15.305Z,1478840115.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:15.416Z,1478840115.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:15.709Z,1478840115.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:16.105Z,1478840116.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:16.212Z,1478840116.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:16.495Z,1478840116.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:16.898Z,1478840116.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:17.008Z,1478840117.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:17.290Z,1478840117.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:17.412Z,1478840117.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:17.680Z,1478840117.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:18.103Z,1478840118.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:18.208Z,1478840118.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:18.521Z,1478840118.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:18.913Z,1478840118.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:19.004Z,1478840119.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:19.285Z,1478840119.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:19.408Z,1478840119.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:19.697Z,1478840119.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:20.101Z,1478840120.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:20.204Z,1478840120.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:20.482Z,1478840120.482 [PNI_TCM](ERROR): CRC does not match. Expected:0x60290 got:0x49017
2016-11-11T04:55:20.523Z,1478840120.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:20.942Z,1478840120.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:20.000Z,1478840121.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:21.299Z,1478840121.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:21.404Z,1478840121.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:21.706Z,1478840121.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:22.142Z,1478840122.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:22.200Z,1478840122.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:22.497Z,1478840122.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:22.909Z,1478840122.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:22.996Z,1478840122.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:23.325Z,1478840123.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:23.400Z,1478840123.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:23.674Z,1478840123.674 [PNI_TCM](ERROR): CRC does not match. Expected:0x33906 got:0x423
2016-11-11T04:55:23.696Z,1478840123.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:24.104Z,1478840124.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:24.196Z,1478840124.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:24.501Z,1478840124.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:24.901Z,1478840124.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:24.992Z,1478840124.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:25.299Z,1478840125.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:25.404Z,1478840125.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:25.709Z,1478840125.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:26.084Z,1478840126.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:26.200Z,1478840126.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:26.485Z,1478840126.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:26.883Z,1478840126.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:26.996Z,1478840126.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:27.298Z,1478840127.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:27.304Z,1478840127.304 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T04:50:27.0Z
2016-11-11T04:55:27.304Z,1478840127.304 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T04:55:27.305Z,1478840127.305 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T04:55:27.400Z,1478840127.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:27.705Z,1478840127.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:27.711Z,1478840127.711 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2016-11-11T04:55:28.196Z,1478840128.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:28.644Z,1478840128.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:28.769Z,1478840128.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:28.992Z,1478840128.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:29.396Z,1478840129.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:30.192Z,1478840130.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:30.988Z,1478840130.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:31.392Z,1478840131.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:32.060Z,1478840132.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:32.132Z,1478840132.132 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20161111T044527/Courier0004.lzma
2016-11-11T04:55:32.188Z,1478840132.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:32.194Z,1478840132.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:32.645Z,1478840132.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:32.924Z,1478840132.924 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0004.lzma.bak
2016-11-11T04:55:32.925Z,1478840132.925 [DataOverHttps](INFO): SBD MOMSN=4554994
2016-11-11T04:55:32.984Z,1478840132.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:33.027Z,1478840133.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:33.388Z,1478840133.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:34.184Z,1478840134.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:34.396Z,1478840134.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:34.520Z,1478840134.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:34.980Z,1478840134.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:35.384Z,1478840135.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:36.180Z,1478840136.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:36.976Z,1478840136.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:37.380Z,1478840137.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:37.917Z,1478840137.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:38.042Z,1478840138.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:38.176Z,1478840138.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:38.424Z,1478840138.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:38.820Z,1478840138.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:38.972Z,1478840138.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:39.250Z,1478840139.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:39.376Z,1478840139.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:39.603Z,1478840139.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:40.172Z,1478840140.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:40.968Z,1478840140.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:41.372Z,1478840141.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:42.168Z,1478840142.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:42.964Z,1478840142.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:43.050Z,1478840143.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:43.079Z,1478840143.079 [DataOverHttps](INFO): Sending 235 bytes from file Logs/20161110T164459/Express0221.lzma
2016-11-11T04:55:43.182Z,1478840143.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:43.368Z,1478840143.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:43.561Z,1478840143.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:43.877Z,1478840143.877 [DataOverHttps](INFO): Moved sent file to Logs/20161110T164459/Express0221.lzma.bak
2016-11-11T04:55:43.877Z,1478840143.878 [DataOverHttps](INFO): SBD MOMSN=4554997
2016-11-11T04:55:43.951Z,1478840143.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:44.164Z,1478840144.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:44.960Z,1478840144.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:45.355Z,1478840145.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:45.364Z,1478840145.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:45.373Z,1478840145.373 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T04:55:45.496Z,1478840145.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:46.160Z,1478840146.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:46.956Z,1478840146.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:47.360Z,1478840147.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:48.156Z,1478840148.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:48.822Z,1478840148.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:48.952Z,1478840148.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:48.961Z,1478840148.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:49.336Z,1478840149.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:49.356Z,1478840149.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:49.741Z,1478840149.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:50.133Z,1478840150.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:50.152Z,1478840150.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:50.585Z,1478840150.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:50.948Z,1478840150.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:51.352Z,1478840151.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:52.149Z,1478840152.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:52.944Z,1478840152.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:53.348Z,1478840153.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:53.890Z,1478840153.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:53.944Z,1478840153.944 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20161110T164459/Express0225.lzma
2016-11-11T04:55:54.027Z,1478840154.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:54.144Z,1478840154.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:54.415Z,1478840154.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:54.737Z,1478840154.737 [DataOverHttps](INFO): Moved sent file to Logs/20161110T164459/Express0225.lzma.bak
2016-11-11T04:55:54.737Z,1478840154.737 [DataOverHttps](INFO): SBD MOMSN=4555002
2016-11-11T04:55:54.793Z,1478840154.793 [PNI_TCM](ERROR): CRC does not match. Expected:0x12075 got:0x6978
2016-11-11T04:55:54.824Z,1478840154.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:54.940Z,1478840154.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T04:55:54.943Z,1478840154.943 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T04:55:54.943Z,1478840154.943 [Rowe_600LCM] Communications Fault, FailCount= 5
2016-11-11T04:55:54.943Z,1478840154.943 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T04:55:55.347Z,1478840155.347 [Rowe_600LCM](INFO): Powering down
2016-11-11T04:55:56.155Z,1478840156.155 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2016-11-11T04:55:56.155Z,1478840156.155 [Rowe_600LCM] Hardware Fault, FailCount= 5
2016-11-11T04:55:56.156Z,1478840156.156 [Rowe_600LCM](ERROR): Hardware Fault
2016-11-11T04:55:56.493Z,1478840156.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2016-11-11T04:55:56.494Z,1478840156.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:56.518Z,1478840156.519 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2016-11-11T04:55:56.523Z,1478840156.523 [CBIT](FAULT): Hardware Fault in component: Rowe_600LCM
2016-11-11T04:55:56.641Z,1478840156.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2016-11-11T04:55:56.642Z,1478840156.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:59.844Z,1478840159.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2016-11-11T04:55:59.845Z,1478840159.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:55:59.973Z,1478840159.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2016-11-11T04:55:59.974Z,1478840159.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:00.277Z,1478840160.277 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T04:56:00.277Z,1478840160.277 [NAL9602] Data Fault, FailCount= 1
2016-11-11T04:56:00.277Z,1478840160.277 [NAL9602](ERROR): Data Fault
2016-11-11T04:56:00.337Z,1478840160.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2016-11-11T04:56:00.338Z,1478840160.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:00.356Z,1478840160.356 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T04:56:00.677Z,1478840160.677 [NAL9602](INFO): Powering down
2016-11-11T04:56:00.738Z,1478840160.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2016-11-11T04:56:00.739Z,1478840160.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:01.118Z,1478840161.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2016-11-11T04:56:01.123Z,1478840161.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:01.521Z,1478840161.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2016-11-11T04:56:01.522Z,1478840161.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:01.576Z,1478840161.576 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T04:56:01.576Z,1478840161.576 [NAL9602] No Fault, FailCount= 1
2016-11-11T04:56:04.759Z,1478840164.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2016-11-11T04:56:04.760Z,1478840164.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:04.821Z,1478840164.821 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20161111T044306/Express0001.lzma
2016-11-11T04:56:04.882Z,1478840164.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2016-11-11T04:56:04.883Z,1478840164.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:05.234Z,1478840165.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T04:56:05.235Z,1478840165.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:05.588Z,1478840165.588 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044306/Express0001.lzma.bak
2016-11-11T04:56:05.589Z,1478840165.589 [DataOverHttps](INFO): SBD MOMSN=4555004
2016-11-11T04:56:05.652Z,1478840165.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T04:56:05.653Z,1478840165.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:06.937Z,1478840166.937 [NAL9602](INFO): Powering up NAL9602
2016-11-11T04:56:06.980Z,1478840166.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2016-11-11T04:56:06.981Z,1478840166.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:07.112Z,1478840167.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2016-11-11T04:56:07.113Z,1478840167.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:10.429Z,1478840170.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T04:56:10.430Z,1478840170.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:10.557Z,1478840170.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2016-11-11T04:56:10.558Z,1478840170.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:10.941Z,1478840170.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2016-11-11T04:56:10.942Z,1478840170.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:11.341Z,1478840171.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2016-11-11T04:56:11.342Z,1478840171.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:11.732Z,1478840171.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2016-11-11T04:56:11.733Z,1478840171.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:12.197Z,1478840172.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2016-11-11T04:56:12.198Z,1478840172.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:15.518Z,1478840175.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:15.550Z,1478840175.550 [DataOverHttps](INFO): Sending 675 bytes from file Logs/20161111T044527/Express0001.lzma
2016-11-11T04:56:15.626Z,1478840175.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:16.055Z,1478840176.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:16.351Z,1478840176.351 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0001.lzma.bak
2016-11-11T04:56:16.351Z,1478840176.351 [DataOverHttps](INFO): SBD MOMSN=4555006
2016-11-11T04:56:16.421Z,1478840176.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:17.710Z,1478840177.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:17.877Z,1478840177.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:20.994Z,1478840180.994 [NAL9602](INFO): NAL9602 initialized
2016-11-11T04:56:21.073Z,1478840181.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:21.197Z,1478840181.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:21.570Z,1478840181.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:21.962Z,1478840181.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:22.399Z,1478840182.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:22.751Z,1478840182.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:25.976Z,1478840185.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:26.035Z,1478840186.035 [DataOverHttps](INFO): Sending 282 bytes from file Logs/20161111T044527/Express0005.lzma
2016-11-11T04:56:26.113Z,1478840186.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:26.485Z,1478840186.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:26.825Z,1478840186.825 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0005.lzma.bak
2016-11-11T04:56:26.825Z,1478840186.825 [DataOverHttps](INFO): SBD MOMSN=4555018
2016-11-11T04:56:26.901Z,1478840186.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:28.191Z,1478840188.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:28.213Z,1478840188.213 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T04:56:28.213Z,1478840188.213 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T04:56:28.213Z,1478840188.213 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T04:56:28.321Z,1478840188.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:31.539Z,1478840191.539 [PNI_TCM](ERROR): CRC does not match. Expected:0x19570 got:0x50485
2016-11-11T04:56:31.539Z,1478840191.539 [PNI_TCM](ERROR): CRC does not match. Expected:0x11551 got:0x61768
2016-11-11T04:56:31.540Z,1478840191.540 [PNI_TCM](ERROR): CRC does not match. Expected:0x32637 got:0x34475
2016-11-11T04:56:31.540Z,1478840191.540 [PNI_TCM](ERROR): CRC does not match. Expected:0x45306 got:0x49458
2016-11-11T04:56:31.540Z,1478840191.540 [PNI_TCM](ERROR): CRC does not match. Expected:0x43418 got:0x23051
2016-11-11T04:56:31.541Z,1478840191.541 [PNI_TCM](ERROR): CRC does not match. Expected:0x32216 got:0x13737
2016-11-11T04:56:31.541Z,1478840191.541 [PNI_TCM](ERROR): CRC does not match. Expected:0x48343 got:0x9353
2016-11-11T04:56:31.542Z,1478840191.542 [PNI_TCM](ERROR): CRC does not match. Expected:0x7005 got:0x38529
2016-11-11T04:56:31.612Z,1478840191.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:31.733Z,1478840191.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:32.099Z,1478840192.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:32.499Z,1478840192.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:32.969Z,1478840192.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:33.289Z,1478840193.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:33.713Z,1478840193.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:34.089Z,1478840194.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:34.539Z,1478840194.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:34.935Z,1478840194.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:35.304Z,1478840195.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:35.690Z,1478840195.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:36.095Z,1478840196.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:36.490Z,1478840196.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:36.889Z,1478840196.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:37.300Z,1478840197.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:37.703Z,1478840197.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:38.104Z,1478840198.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:38.515Z,1478840198.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:38.895Z,1478840198.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:39.294Z,1478840199.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:39.701Z,1478840199.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:40.090Z,1478840200.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:40.506Z,1478840200.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:40.902Z,1478840200.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:41.303Z,1478840201.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:41.701Z,1478840201.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:42.101Z,1478840202.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:42.490Z,1478840202.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:42.898Z,1478840202.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:43.301Z,1478840203.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:43.703Z,1478840203.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:44.106Z,1478840204.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:44.509Z,1478840204.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:44.905Z,1478840204.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:45.300Z,1478840205.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:45.697Z,1478840205.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:46.099Z,1478840206.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:46.549Z,1478840206.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:46.929Z,1478840206.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:47.309Z,1478840207.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:47.689Z,1478840207.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:48.120Z,1478840208.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:48.486Z,1478840208.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:48.917Z,1478840208.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:49.341Z,1478840209.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:49.697Z,1478840209.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:50.095Z,1478840210.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:50.494Z,1478840210.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:50.896Z,1478840210.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:51.305Z,1478840211.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:51.709Z,1478840211.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:52.098Z,1478840212.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:52.535Z,1478840212.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:52.889Z,1478840212.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:53.290Z,1478840213.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:53.693Z,1478840213.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:54.093Z,1478840214.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:54.495Z,1478840214.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:54.901Z,1478840214.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:55.295Z,1478840215.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:55.689Z,1478840215.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:56.088Z,1478840216.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:56.490Z,1478840216.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:56.936Z,1478840216.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:57.309Z,1478840217.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:57.703Z,1478840217.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:58.107Z,1478840218.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:58.497Z,1478840218.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:58.905Z,1478840218.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:59.300Z,1478840219.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:56:59.697Z,1478840219.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:00.101Z,1478840220.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:00.511Z,1478840220.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:00.909Z,1478840220.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:01.303Z,1478840221.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:01.745Z,1478840221.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:02.114Z,1478840222.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:02.521Z,1478840222.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:02.881Z,1478840222.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:03.353Z,1478840223.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:03.734Z,1478840223.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:04.109Z,1478840224.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:04.506Z,1478840224.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:04.890Z,1478840224.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:05.290Z,1478840225.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:05.734Z,1478840225.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:06.089Z,1478840226.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:06.496Z,1478840226.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:06.909Z,1478840226.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:07.303Z,1478840227.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:07.690Z,1478840227.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:08.102Z,1478840228.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:08.501Z,1478840228.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:08.894Z,1478840228.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:09.298Z,1478840229.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:09.712Z,1478840229.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:10.166Z,1478840230.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:10.489Z,1478840230.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:10.892Z,1478840230.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:11.310Z,1478840231.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:11.702Z,1478840231.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:12.108Z,1478840232.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:12.498Z,1478840232.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:12.902Z,1478840232.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:13.306Z,1478840233.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:13.698Z,1478840233.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:14.105Z,1478840234.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:14.513Z,1478840234.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:14.909Z,1478840234.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:15.333Z,1478840235.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:15.711Z,1478840235.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:16.121Z,1478840236.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:16.493Z,1478840236.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:16.892Z,1478840236.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:17.325Z,1478840237.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:17.705Z,1478840237.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:18.133Z,1478840238.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:18.499Z,1478840238.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:18.929Z,1478840238.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:19.296Z,1478840239.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:19.700Z,1478840239.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:20.095Z,1478840240.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:20.508Z,1478840240.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:20.903Z,1478840240.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:21.301Z,1478840241.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:21.694Z,1478840241.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:22.096Z,1478840242.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:22.503Z,1478840242.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:22.897Z,1478840242.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:23.304Z,1478840243.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:23.704Z,1478840243.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:24.116Z,1478840244.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:24.494Z,1478840244.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:24.881Z,1478840244.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:25.286Z,1478840245.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:25.683Z,1478840245.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:26.093Z,1478840246.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:26.509Z,1478840246.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:26.917Z,1478840246.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:27.296Z,1478840247.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:27.694Z,1478840247.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:28.096Z,1478840248.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:28.501Z,1478840248.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:28.893Z,1478840248.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:32.241Z,1478840252.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:32.359Z,1478840252.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:32.753Z,1478840252.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:33.121Z,1478840253.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:33.557Z,1478840253.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:33.950Z,1478840253.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:34.392Z,1478840254.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:34.790Z,1478840254.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:35.146Z,1478840255.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:35.521Z,1478840255.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:35.925Z,1478840255.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:36.326Z,1478840256.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:36.725Z,1478840256.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:37.129Z,1478840257.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:37.536Z,1478840257.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:37.935Z,1478840257.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:38.341Z,1478840258.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:38.737Z,1478840258.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:39.130Z,1478840259.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:39.532Z,1478840259.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:39.932Z,1478840259.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:40.341Z,1478840260.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:40.745Z,1478840260.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:41.142Z,1478840261.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:41.538Z,1478840261.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:41.933Z,1478840261.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:42.349Z,1478840262.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:42.734Z,1478840262.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:43.139Z,1478840263.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:43.547Z,1478840263.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:43.943Z,1478840263.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:44.343Z,1478840264.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:44.738Z,1478840264.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:45.145Z,1478840265.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:45.526Z,1478840265.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:45.926Z,1478840265.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:46.359Z,1478840266.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:46.778Z,1478840266.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:47.173Z,1478840267.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:47.536Z,1478840267.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:47.961Z,1478840267.961 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:47.961Z,1478840267.961 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2016-11-11T04:57:47.961Z,1478840267.961 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T04:57:47.964Z,1478840267.964 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:47.964Z,1478840267.964 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2016-11-11T04:57:47.964Z,1478840267.964 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T04:57:47.966Z,1478840267.966 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:47.966Z,1478840267.966 [DeadReckonWithRespectToWater] Software Fault, FailCount= 4
2016-11-11T04:57:47.966Z,1478840267.966 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T04:57:47.968Z,1478840267.968 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:47.969Z,1478840267.968 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2016-11-11T04:57:47.969Z,1478840267.969 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T04:57:47.970Z,1478840267.970 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:47.971Z,1478840267.971 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 4
2016-11-11T04:57:47.971Z,1478840267.971 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T04:57:47.984Z,1478840267.984 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T04:57:47.984Z,1478840267.984 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T04:57:47.985Z,1478840267.985 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T04:57:47.985Z,1478840267.985 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T04:57:47.985Z,1478840267.985 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T04:57:48.355Z,1478840268.355 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T04:57:48.356Z,1478840268.355 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2016-11-11T04:57:48.356Z,1478840268.356 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T04:57:48.356Z,1478840268.356 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2016-11-11T04:57:48.357Z,1478840268.357 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T04:57:48.357Z,1478840268.357 [DeadReckonWithRespectToWater] No Fault, FailCount= 4
2016-11-11T04:57:48.357Z,1478840268.357 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T04:57:48.357Z,1478840268.358 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2016-11-11T04:57:48.358Z,1478840268.358 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T04:57:48.358Z,1478840268.358 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 4
2016-11-11T04:57:48.769Z,1478840268.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T04:57:48.769Z,1478840268.769 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:57:48.770Z,1478840268.770 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:57:48.770Z,1478840268.770 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T04:57:48.770Z,1478840268.770 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:57:48.771Z,1478840268.771 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:57:48.771Z,1478840268.771 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T04:57:48.772Z,1478840268.772 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:57:48.772Z,1478840268.772 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:57:48.772Z,1478840268.772 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T04:57:48.773Z,1478840268.773 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:57:48.773Z,1478840268.773 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:57:48.774Z,1478840268.774 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T04:57:48.774Z,1478840268.774 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T04:57:48.774Z,1478840268.774 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T04:57:49.170Z,1478840269.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T04:57:49.171Z,1478840269.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:49.556Z,1478840269.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T04:57:49.557Z,1478840269.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:49.943Z,1478840269.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T04:57:49.944Z,1478840269.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:50.348Z,1478840270.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T04:57:50.349Z,1478840270.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:50.742Z,1478840270.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T04:57:50.743Z,1478840270.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:51.136Z,1478840271.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T04:57:51.137Z,1478840271.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:51.544Z,1478840271.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T04:57:51.545Z,1478840271.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:51.940Z,1478840271.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T04:57:51.941Z,1478840271.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:52.346Z,1478840272.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T04:57:52.347Z,1478840272.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:52.749Z,1478840272.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T04:57:52.750Z,1478840272.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:53.143Z,1478840273.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T04:57:53.144Z,1478840273.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:53.539Z,1478840273.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T04:57:53.540Z,1478840273.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:53.941Z,1478840273.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T04:57:53.942Z,1478840273.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:54.344Z,1478840274.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T04:57:54.345Z,1478840274.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:54.742Z,1478840274.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T04:57:54.743Z,1478840274.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:55.142Z,1478840275.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T04:57:55.143Z,1478840275.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:55.554Z,1478840275.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T04:57:55.555Z,1478840275.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:55.945Z,1478840275.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T04:57:55.946Z,1478840275.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:56.320Z,1478840276.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T04:57:56.321Z,1478840276.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:56.728Z,1478840276.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T04:57:56.729Z,1478840276.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:57.129Z,1478840277.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T04:57:57.130Z,1478840277.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:57.534Z,1478840277.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T04:57:57.536Z,1478840277.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:57.940Z,1478840277.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T04:57:57.941Z,1478840277.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:58.341Z,1478840278.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T04:57:58.342Z,1478840278.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:58.732Z,1478840278.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T04:57:58.733Z,1478840278.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:59.141Z,1478840279.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T04:57:59.142Z,1478840279.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:59.529Z,1478840279.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T04:57:59.530Z,1478840279.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:57:59.938Z,1478840279.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T04:57:59.939Z,1478840279.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:00.323Z,1478840280.323 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T04:58:00.333Z,1478840280.333 [BPC1] Data Fault, FailCount= 1
2016-11-11T04:58:00.333Z,1478840280.333 [BPC1](ERROR): Data Fault
2016-11-11T04:58:00.345Z,1478840280.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T04:58:00.346Z,1478840280.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:00.385Z,1478840280.385 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T04:58:00.743Z,1478840280.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T04:58:00.744Z,1478840280.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:01.141Z,1478840281.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T04:58:01.142Z,1478840281.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:01.542Z,1478840281.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T04:58:01.543Z,1478840281.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:01.559Z,1478840281.559 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T04:58:01.559Z,1478840281.559 [BPC1] No Fault, FailCount= 1
2016-11-11T04:58:01.988Z,1478840281.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T04:58:01.990Z,1478840281.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:02.346Z,1478840282.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T04:58:02.347Z,1478840282.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:02.740Z,1478840282.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T04:58:02.741Z,1478840282.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:03.135Z,1478840283.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T04:58:03.136Z,1478840283.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:03.546Z,1478840283.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T04:58:03.547Z,1478840283.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:03.961Z,1478840283.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T04:58:03.962Z,1478840283.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:04.343Z,1478840284.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T04:58:04.344Z,1478840284.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:04.739Z,1478840284.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T04:58:04.740Z,1478840284.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:05.132Z,1478840285.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T04:58:05.133Z,1478840285.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:05.521Z,1478840285.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T04:58:05.522Z,1478840285.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:05.924Z,1478840285.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T04:58:05.925Z,1478840285.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:06.320Z,1478840286.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T04:58:06.321Z,1478840286.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:06.751Z,1478840286.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T04:58:06.756Z,1478840286.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:07.154Z,1478840287.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T04:58:07.155Z,1478840287.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:07.534Z,1478840287.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T04:58:07.547Z,1478840287.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:07.933Z,1478840287.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2016-11-11T04:58:07.934Z,1478840287.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:08.333Z,1478840288.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:08.729Z,1478840288.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:09.138Z,1478840289.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:09.541Z,1478840289.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:09.949Z,1478840289.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:10.342Z,1478840290.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:10.729Z,1478840290.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:11.132Z,1478840291.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:11.539Z,1478840291.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:11.933Z,1478840291.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:12.332Z,1478840292.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:12.746Z,1478840292.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:13.142Z,1478840293.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:13.566Z,1478840293.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:13.972Z,1478840293.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:14.390Z,1478840294.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:14.798Z,1478840294.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:15.138Z,1478840295.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:15.597Z,1478840295.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:15.970Z,1478840295.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:16.373Z,1478840296.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:16.757Z,1478840296.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:17.145Z,1478840297.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:17.552Z,1478840297.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:17.938Z,1478840297.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:18.345Z,1478840298.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:18.784Z,1478840298.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:19.150Z,1478840299.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:19.545Z,1478840299.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:19.921Z,1478840299.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:20.325Z,1478840300.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:20.729Z,1478840300.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:21.125Z,1478840301.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:21.539Z,1478840301.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:21.939Z,1478840301.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:22.339Z,1478840302.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:22.725Z,1478840302.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:23.121Z,1478840303.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:23.525Z,1478840303.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:23.934Z,1478840303.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:24.325Z,1478840304.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:24.736Z,1478840304.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:25.139Z,1478840305.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:25.539Z,1478840305.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:25.922Z,1478840305.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:26.326Z,1478840306.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:26.723Z,1478840306.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:27.126Z,1478840307.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:27.550Z,1478840307.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:27.945Z,1478840307.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:28.347Z,1478840308.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:28.834Z,1478840308.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:29.154Z,1478840309.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:33.529Z,1478840313.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:33.674Z,1478840313.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:34.084Z,1478840314.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:34.485Z,1478840314.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:34.851Z,1478840314.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:35.279Z,1478840315.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:35.647Z,1478840315.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:36.056Z,1478840316.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:36.474Z,1478840316.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:36.902Z,1478840316.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:37.312Z,1478840317.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:37.665Z,1478840317.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:38.067Z,1478840318.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:38.466Z,1478840318.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:38.873Z,1478840318.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:39.256Z,1478840319.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:39.664Z,1478840319.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:40.072Z,1478840320.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:40.459Z,1478840320.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:40.857Z,1478840320.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:41.264Z,1478840321.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:41.638Z,1478840321.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:42.041Z,1478840322.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:42.469Z,1478840322.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:42.867Z,1478840322.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:43.271Z,1478840323.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:43.646Z,1478840323.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:44.046Z,1478840324.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:44.444Z,1478840324.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:44.857Z,1478840324.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:45.252Z,1478840325.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:45.651Z,1478840325.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:46.045Z,1478840326.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:46.452Z,1478840326.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:46.901Z,1478840326.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:47.256Z,1478840327.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:47.693Z,1478840327.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:48.061Z,1478840328.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:48.506Z,1478840328.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:48.891Z,1478840328.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:49.257Z,1478840329.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:49.657Z,1478840329.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:50.050Z,1478840330.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:50.437Z,1478840330.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:50.865Z,1478840330.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:51.261Z,1478840331.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:51.661Z,1478840331.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:52.041Z,1478840332.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:52.445Z,1478840332.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:52.846Z,1478840332.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:53.249Z,1478840333.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:53.651Z,1478840333.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:54.055Z,1478840334.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:54.465Z,1478840334.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:54.845Z,1478840334.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:55.249Z,1478840335.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:55.656Z,1478840335.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:56.047Z,1478840336.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:56.446Z,1478840336.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:56.864Z,1478840336.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:57.258Z,1478840337.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:57.661Z,1478840337.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:58.056Z,1478840338.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:58.460Z,1478840338.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:58.848Z,1478840338.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:59.257Z,1478840339.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:58:59.671Z,1478840339.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:00.062Z,1478840340.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:00.509Z,1478840340.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:00.850Z,1478840340.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:01.274Z,1478840341.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:01.641Z,1478840341.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:02.043Z,1478840342.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:02.473Z,1478840342.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:02.857Z,1478840342.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:03.281Z,1478840343.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:03.684Z,1478840343.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:04.037Z,1478840344.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:04.441Z,1478840344.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:04.836Z,1478840344.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:05.241Z,1478840345.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:05.655Z,1478840345.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:06.059Z,1478840346.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:06.458Z,1478840346.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:06.857Z,1478840346.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:07.241Z,1478840347.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:07.641Z,1478840347.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:08.036Z,1478840348.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:08.445Z,1478840348.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:08.856Z,1478840348.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:09.256Z,1478840349.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:09.657Z,1478840349.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:10.050Z,1478840350.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:10.441Z,1478840350.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:10.851Z,1478840350.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:11.245Z,1478840351.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:11.656Z,1478840351.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:12.060Z,1478840352.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:12.469Z,1478840352.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:12.857Z,1478840352.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:13.258Z,1478840353.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:13.637Z,1478840353.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:14.047Z,1478840354.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:14.442Z,1478840354.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:14.881Z,1478840354.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:15.259Z,1478840355.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:15.681Z,1478840355.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:16.045Z,1478840356.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:16.455Z,1478840356.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:16.873Z,1478840356.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:17.245Z,1478840357.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:17.681Z,1478840357.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:18.097Z,1478840358.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:18.459Z,1478840358.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:18.874Z,1478840358.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:19.231Z,1478840359.231 [PNI_TCM](ERROR): CRC does not match. Expected:0x47219 got:0x49153
2016-11-11T04:59:19.257Z,1478840359.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:19.652Z,1478840359.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:20.045Z,1478840360.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:20.452Z,1478840360.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:20.857Z,1478840360.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:21.265Z,1478840361.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:21.652Z,1478840361.652 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2016-11-11T04:59:21.673Z,1478840361.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:22.047Z,1478840362.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:22.447Z,1478840362.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:22.857Z,1478840362.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:23.247Z,1478840363.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:23.677Z,1478840363.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:24.057Z,1478840364.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:24.465Z,1478840364.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:24.851Z,1478840364.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:25.259Z,1478840365.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:25.648Z,1478840365.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:26.061Z,1478840366.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:26.439Z,1478840366.439 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T04:59:26.465Z,1478840366.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:26.865Z,1478840366.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:27.258Z,1478840367.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:27.658Z,1478840367.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:28.052Z,1478840368.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:28.461Z,1478840368.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:28.866Z,1478840368.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:29.257Z,1478840369.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:32.486Z,1478840372.486 [PNI_TCM](ERROR): CRC does not match. Expected:0x41258 got:0x30372
2016-11-11T04:59:32.487Z,1478840372.487 [PNI_TCM](ERROR): CRC does not match. Expected:0x2761 got:0x30745
2016-11-11T04:59:32.487Z,1478840372.487 [PNI_TCM](ERROR): CRC does not match. Expected:0x60126 got:0x30763
2016-11-11T04:59:32.488Z,1478840372.488 [PNI_TCM](ERROR): CRC does not match. Expected:0x52562 got:0x30829
2016-11-11T04:59:32.488Z,1478840372.488 [PNI_TCM](ERROR): CRC does not match. Expected:0x39108 got:0x31085
2016-11-11T04:59:32.488Z,1478840372.488 [PNI_TCM](ERROR): CRC does not match. Expected:0x22325 got:0x30771
2016-11-11T04:59:32.489Z,1478840372.489 [PNI_TCM](ERROR): CRC does not match. Expected:0x29219 got:0x30828
2016-11-11T04:59:32.489Z,1478840372.489 [PNI_TCM](ERROR): CRC does not match. Expected:0x41047 got:0x30917
2016-11-11T04:59:32.517Z,1478840372.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:32.657Z,1478840372.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:33.031Z,1478840373.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:33.419Z,1478840373.419 [BPC1](ERROR): Failed to receive battery data
2016-11-11T04:59:33.419Z,1478840373.419 [BPC1] Communications Fault, FailCount= 1
2016-11-11T04:59:33.419Z,1478840373.419 [BPC1](ERROR): Communications Fault
2016-11-11T04:59:33.436Z,1478840373.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:33.473Z,1478840373.473 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T04:59:33.828Z,1478840373.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:34.228Z,1478840374.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:34.645Z,1478840374.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:34.674Z,1478840374.674 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T04:59:34.674Z,1478840374.674 [BPC1] No Fault, FailCount= 1
2016-11-11T04:59:35.089Z,1478840375.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:35.436Z,1478840375.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:35.833Z,1478840375.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:36.226Z,1478840376.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:36.638Z,1478840376.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:37.014Z,1478840377.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:37.438Z,1478840377.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:37.840Z,1478840377.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:38.233Z,1478840378.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:38.654Z,1478840378.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:39.042Z,1478840379.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:39.437Z,1478840379.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:39.817Z,1478840379.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:40.221Z,1478840380.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:40.627Z,1478840380.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:41.033Z,1478840381.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:41.433Z,1478840381.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:41.819Z,1478840381.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:42.225Z,1478840382.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:42.623Z,1478840382.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:43.021Z,1478840383.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:43.437Z,1478840383.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:43.829Z,1478840383.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:44.233Z,1478840384.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:44.625Z,1478840384.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:45.024Z,1478840385.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:45.423Z,1478840385.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:45.821Z,1478840385.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:46.224Z,1478840386.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:46.641Z,1478840386.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:47.041Z,1478840387.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:47.434Z,1478840387.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:47.822Z,1478840387.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:48.225Z,1478840388.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:48.634Z,1478840388.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:49.025Z,1478840389.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:49.470Z,1478840389.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:49.835Z,1478840389.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:50.235Z,1478840390.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:50.629Z,1478840390.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:51.033Z,1478840391.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:51.429Z,1478840391.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:51.826Z,1478840391.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:52.240Z,1478840392.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:52.646Z,1478840392.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:53.041Z,1478840393.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:53.437Z,1478840393.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:53.806Z,1478840393.806 [BPC1](ERROR): Failed to receive battery data
2016-11-11T04:59:53.806Z,1478840393.806 [BPC1] Communications Fault, FailCount= 2
2016-11-11T04:59:53.806Z,1478840393.806 [BPC1](ERROR): Communications Fault
2016-11-11T04:59:53.815Z,1478840393.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:53.863Z,1478840393.863 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T04:59:54.217Z,1478840394.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:54.653Z,1478840394.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:55.017Z,1478840395.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:55.069Z,1478840395.069 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T04:59:55.069Z,1478840395.069 [BPC1] No Fault, FailCount= 2
2016-11-11T04:59:55.486Z,1478840395.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:55.861Z,1478840395.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:56.247Z,1478840396.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:56.625Z,1478840396.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:57.018Z,1478840397.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:57.421Z,1478840397.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:57.821Z,1478840397.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:58.225Z,1478840398.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:58.628Z,1478840398.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:59.033Z,1478840399.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:59.428Z,1478840399.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T04:59:59.820Z,1478840399.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:00.222Z,1478840400.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:00.631Z,1478840400.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:01.022Z,1478840401.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:01.433Z,1478840401.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:01.830Z,1478840401.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:02.233Z,1478840402.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:02.624Z,1478840402.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:03.025Z,1478840403.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:03.426Z,1478840403.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:03.825Z,1478840403.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:04.233Z,1478840404.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:04.636Z,1478840404.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:05.047Z,1478840405.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:05.435Z,1478840405.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:05.822Z,1478840405.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:06.221Z,1478840406.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:06.673Z,1478840406.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:07.022Z,1478840407.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:07.477Z,1478840407.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:07.836Z,1478840407.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:08.269Z,1478840408.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:08.638Z,1478840408.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:09.033Z,1478840409.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:09.430Z,1478840409.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:09.835Z,1478840409.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:10.214Z,1478840410.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:10.637Z,1478840410.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:11.037Z,1478840411.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:11.440Z,1478840411.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:11.837Z,1478840411.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:12.217Z,1478840412.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:12.631Z,1478840412.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:13.028Z,1478840413.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:13.433Z,1478840413.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:13.827Z,1478840413.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:14.233Z,1478840414.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:14.633Z,1478840414.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:15.022Z,1478840415.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:15.428Z,1478840415.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:15.826Z,1478840415.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:16.226Z,1478840416.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:16.635Z,1478840416.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:17.038Z,1478840417.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:17.434Z,1478840417.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:17.822Z,1478840417.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:18.228Z,1478840418.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:18.633Z,1478840418.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:19.069Z,1478840419.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:19.467Z,1478840419.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:19.835Z,1478840419.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:20.234Z,1478840420.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:20.645Z,1478840420.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:21.027Z,1478840421.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:21.445Z,1478840421.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:21.866Z,1478840421.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:22.233Z,1478840422.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:22.635Z,1478840422.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:23.033Z,1478840423.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:23.441Z,1478840423.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:23.830Z,1478840423.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:24.231Z,1478840424.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:24.635Z,1478840424.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:25.030Z,1478840425.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:25.435Z,1478840425.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:25.837Z,1478840425.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:26.237Z,1478840426.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:26.635Z,1478840426.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:27.013Z,1478840427.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:27.428Z,1478840427.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:27.821Z,1478840427.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:28.213Z,1478840428.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:28.640Z,1478840428.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:29.049Z,1478840429.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:29.453Z,1478840429.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:32.718Z,1478840432.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:32.850Z,1478840432.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:33.262Z,1478840433.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:33.631Z,1478840433.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:34.069Z,1478840434.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:34.441Z,1478840434.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:34.798Z,1478840434.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:35.228Z,1478840435.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:35.629Z,1478840435.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:35.998Z,1478840435.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:36.419Z,1478840436.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:36.833Z,1478840436.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:37.231Z,1478840437.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:37.609Z,1478840437.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:38.000Z,1478840438.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:38.401Z,1478840438.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:38.815Z,1478840438.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:39.206Z,1478840439.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:39.612Z,1478840439.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:40.010Z,1478840440.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:40.411Z,1478840440.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:40.814Z,1478840440.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:41.206Z,1478840441.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:41.610Z,1478840441.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:42.006Z,1478840442.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:42.418Z,1478840442.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:42.822Z,1478840442.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:43.221Z,1478840443.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:43.621Z,1478840443.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:44.021Z,1478840444.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:44.405Z,1478840444.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:44.805Z,1478840444.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:45.277Z,1478840445.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:45.612Z,1478840445.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:46.038Z,1478840446.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:46.551Z,1478840446.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:46.837Z,1478840446.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:47.245Z,1478840447.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:47.608Z,1478840447.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:48.006Z,1478840448.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:48.415Z,1478840448.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:48.821Z,1478840448.821 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:48.821Z,1478840448.821 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2016-11-11T05:00:48.821Z,1478840448.821 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:00:48.823Z,1478840448.823 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:48.823Z,1478840448.823 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2016-11-11T05:00:48.823Z,1478840448.823 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T05:00:48.825Z,1478840448.825 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:48.826Z,1478840448.826 [DeadReckonWithRespectToWater] Software Fault, FailCount= 5
2016-11-11T05:00:48.826Z,1478840448.826 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T05:00:48.856Z,1478840448.856 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:48.857Z,1478840448.856 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2016-11-11T05:00:48.857Z,1478840448.856 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:00:48.859Z,1478840448.859 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:48.859Z,1478840448.859 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 5
2016-11-11T05:00:48.859Z,1478840448.859 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:00:48.890Z,1478840448.889 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:00:48.890Z,1478840448.890 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T05:00:48.890Z,1478840448.890 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T05:00:48.890Z,1478840448.890 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:00:48.891Z,1478840448.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:00:49.230Z,1478840449.230 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:00:49.230Z,1478840449.230 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2016-11-11T05:00:49.239Z,1478840449.239 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T05:00:49.239Z,1478840449.239 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2016-11-11T05:00:49.240Z,1478840449.240 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T05:00:49.240Z,1478840449.240 [DeadReckonWithRespectToWater] No Fault, FailCount= 5
2016-11-11T05:00:49.241Z,1478840449.241 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:00:49.241Z,1478840449.241 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2016-11-11T05:00:49.241Z,1478840449.241 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:00:49.241Z,1478840449.241 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 5
2016-11-11T05:00:49.613Z,1478840449.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:00:49.614Z,1478840449.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:00:49.614Z,1478840449.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:00:49.615Z,1478840449.615 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T05:00:49.615Z,1478840449.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:00:49.615Z,1478840449.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:00:49.616Z,1478840449.616 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T05:00:49.616Z,1478840449.616 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:00:49.617Z,1478840449.617 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:00:49.617Z,1478840449.617 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:00:49.617Z,1478840449.617 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:00:49.618Z,1478840449.618 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:00:49.618Z,1478840449.618 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:00:49.619Z,1478840449.619 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:00:49.619Z,1478840449.619 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:00:50.009Z,1478840450.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T05:00:50.010Z,1478840450.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:50.398Z,1478840450.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T05:00:50.399Z,1478840450.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:50.801Z,1478840450.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T05:00:50.803Z,1478840450.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:51.197Z,1478840451.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T05:00:51.198Z,1478840451.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:51.627Z,1478840451.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T05:00:51.628Z,1478840451.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:52.014Z,1478840452.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T05:00:52.035Z,1478840452.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:52.411Z,1478840452.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T05:00:52.412Z,1478840452.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:52.806Z,1478840452.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T05:00:52.809Z,1478840452.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:53.213Z,1478840453.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T05:00:53.214Z,1478840453.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:53.611Z,1478840453.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T05:00:53.612Z,1478840453.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:54.016Z,1478840454.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T05:00:54.017Z,1478840454.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:54.421Z,1478840454.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T05:00:54.421Z,1478840454.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:54.820Z,1478840454.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T05:00:54.821Z,1478840454.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:55.215Z,1478840455.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T05:00:55.216Z,1478840455.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:55.609Z,1478840455.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T05:00:55.610Z,1478840455.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:56.008Z,1478840456.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T05:00:56.009Z,1478840456.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:56.407Z,1478840456.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T05:00:56.408Z,1478840456.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:56.817Z,1478840456.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T05:00:56.818Z,1478840456.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:57.191Z,1478840457.191 [BPC1](ERROR): Failed to parse message.
2016-11-11T05:00:57.192Z,1478840457.192 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T05:00:57.192Z,1478840457.192 [BPC1] Data Fault, FailCount= 1
2016-11-11T05:00:57.192Z,1478840457.192 [BPC1](ERROR): Data Fault
2016-11-11T05:00:57.209Z,1478840457.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T05:00:57.210Z,1478840457.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:57.256Z,1478840457.256 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:00:57.623Z,1478840457.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T05:00:57.624Z,1478840457.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:58.023Z,1478840458.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T05:00:58.024Z,1478840458.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:58.421Z,1478840458.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T05:00:58.422Z,1478840458.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:58.438Z,1478840458.438 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:00:58.438Z,1478840458.438 [BPC1] No Fault, FailCount= 1
2016-11-11T05:00:58.865Z,1478840458.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T05:00:58.866Z,1478840458.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:59.233Z,1478840459.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T05:00:59.234Z,1478840459.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:59.623Z,1478840459.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T05:00:59.624Z,1478840459.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:00:59.998Z,1478840459.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T05:00:59.999Z,1478840459.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:00.428Z,1478840460.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T05:01:00.430Z,1478840460.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:00.822Z,1478840460.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T05:01:00.823Z,1478840460.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:01.228Z,1478840461.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T05:01:01.229Z,1478840461.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:01.597Z,1478840461.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T05:01:01.598Z,1478840461.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:01.997Z,1478840461.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T05:01:01.998Z,1478840461.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:02.405Z,1478840462.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T05:01:02.406Z,1478840462.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:02.806Z,1478840462.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T05:01:02.808Z,1478840462.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:03.204Z,1478840463.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T05:01:03.205Z,1478840463.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:03.615Z,1478840463.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T05:01:03.616Z,1478840463.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:04.011Z,1478840464.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T05:01:04.012Z,1478840464.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:04.420Z,1478840464.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T05:01:04.421Z,1478840464.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:04.807Z,1478840464.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T05:01:04.808Z,1478840464.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:05.213Z,1478840465.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T05:01:05.214Z,1478840465.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:05.613Z,1478840465.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T05:01:05.614Z,1478840465.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:06.016Z,1478840466.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T05:01:06.017Z,1478840466.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:06.428Z,1478840466.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T05:01:06.429Z,1478840466.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:06.822Z,1478840466.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T05:01:06.822Z,1478840466.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:07.222Z,1478840467.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T05:01:07.224Z,1478840467.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:07.611Z,1478840467.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T05:01:07.613Z,1478840467.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:08.013Z,1478840468.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T05:01:08.014Z,1478840468.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:08.416Z,1478840468.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T05:01:08.417Z,1478840468.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:08.818Z,1478840468.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2016-11-11T05:01:08.819Z,1478840468.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:09.225Z,1478840469.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:09.661Z,1478840469.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:10.024Z,1478840470.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:10.450Z,1478840470.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:10.802Z,1478840470.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:11.238Z,1478840471.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:11.607Z,1478840471.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:12.037Z,1478840472.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:12.445Z,1478840472.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:12.818Z,1478840472.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:13.226Z,1478840473.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:13.607Z,1478840473.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:14.006Z,1478840474.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:14.412Z,1478840474.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:14.813Z,1478840474.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:15.225Z,1478840475.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:15.622Z,1478840475.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:16.020Z,1478840476.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:16.417Z,1478840476.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:16.816Z,1478840476.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:17.216Z,1478840477.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:17.610Z,1478840477.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:18.010Z,1478840478.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:18.421Z,1478840478.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:18.819Z,1478840478.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:19.223Z,1478840479.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:19.616Z,1478840479.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:20.017Z,1478840480.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:20.415Z,1478840480.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:20.802Z,1478840480.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:21.229Z,1478840481.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:21.632Z,1478840481.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:22.031Z,1478840482.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:22.409Z,1478840482.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:22.805Z,1478840482.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:23.257Z,1478840483.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:23.608Z,1478840483.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:24.041Z,1478840484.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:24.439Z,1478840484.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:24.848Z,1478840484.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:25.246Z,1478840485.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:25.610Z,1478840485.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:26.006Z,1478840486.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:26.414Z,1478840486.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:26.806Z,1478840486.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:27.225Z,1478840487.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:27.625Z,1478840487.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:28.019Z,1478840488.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:28.406Z,1478840488.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:28.411Z,1478840488.411 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T05:01:28.411Z,1478840488.411 [Default:CheckIn:C.Wait] Stopped
2016-11-11T05:01:28.411Z,1478840488.411 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T05:01:28.411Z,1478840488.411 [Default:CheckIn:D] Running Loop=1
2016-11-11T05:01:28.810Z,1478840488.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:28.830Z,1478840488.830 [Default:CheckIn:D] Stopped
2016-11-11T05:01:28.830Z,1478840488.830 [Default:CheckIn:E] Running Loop=1
2016-11-11T05:01:29.218Z,1478840489.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:29.232Z,1478840489.232 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 11.458626 min 
2016-11-11T05:01:29.234Z,1478840489.234 [Default:CheckIn:E] Stopped
2016-11-11T05:01:29.234Z,1478840489.234 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T05:01:29.234Z,1478840489.234 [Default:CheckIn] Stopped
2016-11-11T05:01:29.234Z,1478840489.234 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T05:01:29.234Z,1478840489.234 [Default:CheckIn](INFO): Running loop #2
2016-11-11T05:01:29.235Z,1478840489.234 [Default:CheckIn] Running Loop=2
2016-11-11T05:01:29.235Z,1478840489.235 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T05:01:29.235Z,1478840489.235 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T05:01:29.617Z,1478840489.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:32.840Z,1478840492.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:32.993Z,1478840492.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:33.345Z,1478840493.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:33.742Z,1478840493.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:34.133Z,1478840494.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:34.538Z,1478840494.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:34.929Z,1478840494.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:35.345Z,1478840495.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:35.781Z,1478840495.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:36.189Z,1478840496.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:36.538Z,1478840496.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:36.957Z,1478840496.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:37.321Z,1478840497.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:37.765Z,1478840497.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:38.158Z,1478840498.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:38.548Z,1478840498.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:38.951Z,1478840498.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:39.335Z,1478840499.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:39.724Z,1478840499.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:40.133Z,1478840500.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:40.533Z,1478840500.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:40.928Z,1478840500.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:41.339Z,1478840501.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:41.741Z,1478840501.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:42.142Z,1478840502.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:42.534Z,1478840502.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:42.933Z,1478840502.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:43.331Z,1478840503.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:43.734Z,1478840503.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:44.133Z,1478840504.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:44.543Z,1478840504.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:44.945Z,1478840504.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:45.349Z,1478840505.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:45.741Z,1478840505.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:46.130Z,1478840506.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:46.540Z,1478840506.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:46.937Z,1478840506.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:47.344Z,1478840507.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:47.748Z,1478840507.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:48.149Z,1478840508.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:48.536Z,1478840508.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:48.961Z,1478840508.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:49.333Z,1478840509.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:49.743Z,1478840509.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:50.125Z,1478840510.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:50.555Z,1478840510.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:50.965Z,1478840510.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:51.359Z,1478840511.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:51.758Z,1478840511.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:52.165Z,1478840512.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:52.533Z,1478840512.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:52.926Z,1478840512.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:53.355Z,1478840513.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:53.741Z,1478840513.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:54.141Z,1478840514.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:54.534Z,1478840514.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:54.933Z,1478840514.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:55.329Z,1478840515.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:55.734Z,1478840515.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:56.133Z,1478840516.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:56.542Z,1478840516.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:56.945Z,1478840516.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:57.342Z,1478840517.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:57.729Z,1478840517.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:58.129Z,1478840518.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:58.544Z,1478840518.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:58.921Z,1478840518.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:59.353Z,1478840519.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:01:59.746Z,1478840519.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:00.153Z,1478840520.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:00.522Z,1478840520.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:00.929Z,1478840520.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:01.329Z,1478840521.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:01.730Z,1478840521.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:02.129Z,1478840522.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:02.536Z,1478840522.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:02.958Z,1478840522.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:03.349Z,1478840523.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:03.735Z,1478840523.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:04.173Z,1478840524.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:04.537Z,1478840524.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:04.929Z,1478840524.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:05.343Z,1478840525.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:05.742Z,1478840525.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:06.143Z,1478840526.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:06.530Z,1478840526.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:06.939Z,1478840526.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:07.322Z,1478840527.322 [BPC1](ERROR): Failed to receive battery data
2016-11-11T05:02:07.323Z,1478840527.323 [BPC1] Communications Fault, FailCount= 1
2016-11-11T05:02:07.323Z,1478840527.323 [BPC1](ERROR): Communications Fault
2016-11-11T05:02:07.343Z,1478840527.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:07.384Z,1478840527.384 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T05:02:07.740Z,1478840527.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:08.136Z,1478840528.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:08.543Z,1478840528.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:08.563Z,1478840528.563 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:02:08.564Z,1478840528.564 [BPC1] No Fault, FailCount= 1
2016-11-11T05:02:09.001Z,1478840529.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:09.386Z,1478840529.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:09.737Z,1478840529.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:10.121Z,1478840530.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:10.552Z,1478840530.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:10.921Z,1478840530.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:11.352Z,1478840531.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:11.764Z,1478840531.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:12.131Z,1478840532.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:12.533Z,1478840532.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:12.933Z,1478840532.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:13.329Z,1478840533.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:13.736Z,1478840533.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:14.133Z,1478840534.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:14.535Z,1478840534.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:14.941Z,1478840534.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:15.345Z,1478840535.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:15.741Z,1478840535.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:16.130Z,1478840536.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:16.537Z,1478840536.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:16.921Z,1478840536.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:17.352Z,1478840537.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:17.761Z,1478840537.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:18.135Z,1478840538.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:18.529Z,1478840538.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:18.928Z,1478840538.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:19.330Z,1478840539.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:19.738Z,1478840539.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:20.133Z,1478840540.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:20.544Z,1478840540.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:20.950Z,1478840540.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:21.381Z,1478840541.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:21.757Z,1478840541.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:22.136Z,1478840542.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:22.574Z,1478840542.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:22.941Z,1478840542.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:23.381Z,1478840543.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:23.772Z,1478840543.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:24.146Z,1478840544.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:24.543Z,1478840544.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:24.937Z,1478840544.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:25.340Z,1478840545.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:25.742Z,1478840545.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:26.143Z,1478840546.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:26.543Z,1478840546.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:26.942Z,1478840546.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:27.347Z,1478840547.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:27.736Z,1478840547.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:28.133Z,1478840548.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:28.522Z,1478840548.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:28.921Z,1478840548.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:29.354Z,1478840549.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:29.761Z,1478840549.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:33.002Z,1478840553.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:33.117Z,1478840553.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:33.481Z,1478840553.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:33.881Z,1478840553.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:34.273Z,1478840554.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:34.680Z,1478840554.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:35.089Z,1478840555.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:35.484Z,1478840555.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:35.945Z,1478840555.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:36.285Z,1478840556.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:36.720Z,1478840556.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:37.097Z,1478840557.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:37.522Z,1478840557.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:37.925Z,1478840557.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:38.289Z,1478840558.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:38.685Z,1478840558.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:39.080Z,1478840559.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:39.484Z,1478840559.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:39.885Z,1478840559.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:40.297Z,1478840560.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:40.691Z,1478840560.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:41.087Z,1478840561.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:41.484Z,1478840561.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:41.878Z,1478840561.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:42.285Z,1478840562.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:42.681Z,1478840562.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:43.087Z,1478840563.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:43.497Z,1478840563.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:43.889Z,1478840563.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:44.284Z,1478840564.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:44.685Z,1478840564.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:45.086Z,1478840565.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:45.466Z,1478840565.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:45.896Z,1478840565.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:46.297Z,1478840566.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:46.689Z,1478840566.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:47.101Z,1478840567.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:47.465Z,1478840567.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:47.869Z,1478840567.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:48.273Z,1478840568.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:48.677Z,1478840568.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:49.079Z,1478840569.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:49.485Z,1478840569.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:49.933Z,1478840569.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:50.282Z,1478840570.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:50.697Z,1478840570.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:51.074Z,1478840571.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:51.514Z,1478840571.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:51.898Z,1478840571.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:52.289Z,1478840572.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:52.686Z,1478840572.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:53.087Z,1478840573.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:53.481Z,1478840573.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:53.874Z,1478840573.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:54.276Z,1478840574.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:54.677Z,1478840574.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:55.088Z,1478840575.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:55.487Z,1478840575.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:55.889Z,1478840575.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:56.281Z,1478840576.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:56.689Z,1478840576.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:57.066Z,1478840577.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:57.470Z,1478840577.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:57.869Z,1478840577.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:58.289Z,1478840578.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:58.700Z,1478840578.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:59.107Z,1478840579.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:59.470Z,1478840579.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:02:59.871Z,1478840579.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:00.277Z,1478840580.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:00.674Z,1478840580.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:01.085Z,1478840581.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:01.485Z,1478840581.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:01.892Z,1478840581.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:02.282Z,1478840582.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:02.689Z,1478840582.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:03.089Z,1478840583.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:03.466Z,1478840583.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:03.928Z,1478840583.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:04.280Z,1478840584.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:04.709Z,1478840584.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:05.107Z,1478840585.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:05.505Z,1478840585.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:05.913Z,1478840585.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:06.283Z,1478840586.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:06.676Z,1478840586.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:07.085Z,1478840587.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:07.493Z,1478840587.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:07.889Z,1478840587.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:08.277Z,1478840588.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:08.673Z,1478840588.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:09.083Z,1478840589.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:09.477Z,1478840589.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:09.881Z,1478840589.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:10.284Z,1478840590.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:10.693Z,1478840590.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:11.107Z,1478840591.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:11.496Z,1478840591.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:11.887Z,1478840591.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:12.317Z,1478840592.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:12.688Z,1478840592.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:13.093Z,1478840593.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:13.508Z,1478840593.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:13.906Z,1478840593.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:14.295Z,1478840594.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:14.698Z,1478840594.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:15.102Z,1478840595.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:15.511Z,1478840595.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:15.916Z,1478840595.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:16.298Z,1478840596.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:16.697Z,1478840596.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:17.105Z,1478840597.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:17.489Z,1478840597.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:17.889Z,1478840597.889 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T05:03:17.889Z,1478840597.889 [BPC1] Data Fault, FailCount= 1
2016-11-11T05:03:17.889Z,1478840597.889 [BPC1](ERROR): Data Fault
2016-11-11T05:03:17.909Z,1478840597.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:17.988Z,1478840597.988 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:03:18.323Z,1478840598.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:18.673Z,1478840598.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:19.106Z,1478840599.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:19.123Z,1478840599.122 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:03:19.123Z,1478840599.123 [BPC1] No Fault, FailCount= 1
2016-11-11T05:03:19.562Z,1478840599.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:19.944Z,1478840599.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:20.285Z,1478840600.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:20.673Z,1478840600.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:21.105Z,1478840601.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:21.514Z,1478840601.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:21.881Z,1478840601.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:22.303Z,1478840602.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:22.733Z,1478840602.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:23.113Z,1478840603.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:23.493Z,1478840603.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:23.937Z,1478840603.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:24.300Z,1478840604.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:24.698Z,1478840604.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:25.161Z,1478840605.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:25.508Z,1478840605.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:25.952Z,1478840605.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:26.272Z,1478840606.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:26.669Z,1478840606.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:27.077Z,1478840607.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:27.472Z,1478840607.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:27.872Z,1478840607.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:28.280Z,1478840608.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:28.685Z,1478840608.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:29.080Z,1478840609.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:29.480Z,1478840609.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:29.873Z,1478840609.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:33.183Z,1478840613.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:33.310Z,1478840613.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:33.717Z,1478840613.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:34.094Z,1478840614.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:34.536Z,1478840614.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:34.898Z,1478840614.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:35.293Z,1478840615.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:35.688Z,1478840615.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:36.091Z,1478840616.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:36.501Z,1478840616.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:36.894Z,1478840616.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:37.290Z,1478840617.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:37.670Z,1478840617.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:38.066Z,1478840618.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:38.508Z,1478840618.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:38.899Z,1478840618.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:39.292Z,1478840619.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:39.699Z,1478840619.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:40.072Z,1478840620.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:40.474Z,1478840620.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:40.881Z,1478840620.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:41.300Z,1478840621.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:41.699Z,1478840621.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:42.101Z,1478840622.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:42.473Z,1478840622.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:42.874Z,1478840622.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:43.277Z,1478840623.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:43.709Z,1478840623.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:44.080Z,1478840624.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:44.489Z,1478840624.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:44.912Z,1478840624.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:45.289Z,1478840625.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:45.681Z,1478840625.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:46.081Z,1478840626.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:46.480Z,1478840626.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:46.885Z,1478840626.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:47.329Z,1478840627.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:47.737Z,1478840627.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:48.091Z,1478840628.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:48.486Z,1478840628.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:48.917Z,1478840628.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:49.293Z,1478840629.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:49.766Z,1478840629.766 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:49.766Z,1478840629.766 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2016-11-11T05:03:49.766Z,1478840629.766 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:03:49.768Z,1478840629.768 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:49.768Z,1478840629.768 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2016-11-11T05:03:49.768Z,1478840629.769 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T05:03:49.771Z,1478840629.771 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:49.771Z,1478840629.771 [DeadReckonWithRespectToWater] Software Fault, FailCount= 6
2016-11-11T05:03:49.771Z,1478840629.771 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T05:03:49.789Z,1478840629.789 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:49.789Z,1478840629.789 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2016-11-11T05:03:49.789Z,1478840629.789 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:03:49.791Z,1478840629.792 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:49.792Z,1478840629.792 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 6
2016-11-11T05:03:49.792Z,1478840629.792 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:03:49.820Z,1478840629.820 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:03:49.820Z,1478840629.820 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T05:03:49.821Z,1478840629.821 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T05:03:49.821Z,1478840629.821 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:03:49.821Z,1478840629.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:03:50.114Z,1478840630.114 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:03:50.114Z,1478840630.114 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2016-11-11T05:03:50.115Z,1478840630.115 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T05:03:50.116Z,1478840630.115 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2016-11-11T05:03:50.116Z,1478840630.116 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T05:03:50.116Z,1478840630.116 [DeadReckonWithRespectToWater] No Fault, FailCount= 6
2016-11-11T05:03:50.117Z,1478840630.117 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:03:50.117Z,1478840630.117 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2016-11-11T05:03:50.117Z,1478840630.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:03:50.117Z,1478840630.117 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 6
2016-11-11T05:03:50.484Z,1478840630.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:03:50.484Z,1478840630.484 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:03:50.485Z,1478840630.485 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:03:50.485Z,1478840630.485 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T05:03:50.486Z,1478840630.486 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:03:50.486Z,1478840630.486 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:03:50.486Z,1478840630.486 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T05:03:50.487Z,1478840630.487 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:03:50.519Z,1478840630.519 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:03:50.519Z,1478840630.519 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:03:50.520Z,1478840630.520 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:03:50.520Z,1478840630.520 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:03:50.520Z,1478840630.520 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:03:50.521Z,1478840630.521 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:03:50.521Z,1478840630.521 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:03:50.909Z,1478840630.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.1 s old, using for 20.0 s.
2016-11-11T05:03:50.910Z,1478840630.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:51.292Z,1478840631.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s.
2016-11-11T05:03:51.293Z,1478840631.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:51.685Z,1478840631.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2016-11-11T05:03:51.686Z,1478840631.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:52.081Z,1478840632.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2016-11-11T05:03:52.082Z,1478840632.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:52.470Z,1478840632.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.7 s old, using for 20.0 s.
2016-11-11T05:03:52.471Z,1478840632.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:52.894Z,1478840632.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.1 s old, using for 20.0 s.
2016-11-11T05:03:52.896Z,1478840632.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:53.342Z,1478840633.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T05:03:53.343Z,1478840633.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:53.701Z,1478840633.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2016-11-11T05:03:53.702Z,1478840633.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:54.094Z,1478840634.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2016-11-11T05:03:54.095Z,1478840634.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:54.481Z,1478840634.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2016-11-11T05:03:54.482Z,1478840634.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:54.878Z,1478840634.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2016-11-11T05:03:54.879Z,1478840634.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:55.284Z,1478840635.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2016-11-11T05:03:55.285Z,1478840635.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:55.675Z,1478840635.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2016-11-11T05:03:55.677Z,1478840635.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:56.076Z,1478840636.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2016-11-11T05:03:56.077Z,1478840636.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:56.487Z,1478840636.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2016-11-11T05:03:56.488Z,1478840636.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:56.884Z,1478840636.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2016-11-11T05:03:56.885Z,1478840636.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:57.286Z,1478840637.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2016-11-11T05:03:57.287Z,1478840637.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:57.678Z,1478840637.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2016-11-11T05:03:57.679Z,1478840637.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:58.087Z,1478840638.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2016-11-11T05:03:58.088Z,1478840638.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:58.482Z,1478840638.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2016-11-11T05:03:58.484Z,1478840638.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:58.885Z,1478840638.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2016-11-11T05:03:58.886Z,1478840638.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:59.289Z,1478840639.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2016-11-11T05:03:59.291Z,1478840639.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:03:59.700Z,1478840639.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2016-11-11T05:03:59.701Z,1478840639.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:00.096Z,1478840640.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2016-11-11T05:04:00.097Z,1478840640.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:00.480Z,1478840640.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2016-11-11T05:04:00.481Z,1478840640.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:00.877Z,1478840640.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2016-11-11T05:04:00.878Z,1478840640.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:01.288Z,1478840641.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2016-11-11T05:04:01.289Z,1478840641.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:01.689Z,1478840641.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2016-11-11T05:04:01.690Z,1478840641.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:02.137Z,1478840642.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T05:04:02.138Z,1478840642.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:02.492Z,1478840642.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2016-11-11T05:04:02.493Z,1478840642.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:02.938Z,1478840642.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T05:04:02.940Z,1478840642.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:03.292Z,1478840643.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2016-11-11T05:04:03.293Z,1478840643.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:03.727Z,1478840643.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T05:04:03.728Z,1478840643.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:04.100Z,1478840644.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2016-11-11T05:04:04.101Z,1478840644.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:04.487Z,1478840644.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2016-11-11T05:04:04.488Z,1478840644.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:04.882Z,1478840644.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2016-11-11T05:04:04.884Z,1478840644.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:05.302Z,1478840645.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2016-11-11T05:04:05.303Z,1478840645.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:05.697Z,1478840645.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2016-11-11T05:04:05.698Z,1478840645.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:06.100Z,1478840646.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2016-11-11T05:04:06.101Z,1478840646.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:06.473Z,1478840646.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2016-11-11T05:04:06.474Z,1478840646.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:06.897Z,1478840646.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2016-11-11T05:04:06.898Z,1478840646.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:07.273Z,1478840647.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2016-11-11T05:04:07.274Z,1478840647.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:07.672Z,1478840647.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2016-11-11T05:04:07.673Z,1478840647.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:08.101Z,1478840648.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2016-11-11T05:04:08.102Z,1478840648.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:08.488Z,1478840648.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2016-11-11T05:04:08.489Z,1478840648.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:08.879Z,1478840648.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2016-11-11T05:04:08.880Z,1478840648.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:09.284Z,1478840649.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2016-11-11T05:04:09.285Z,1478840649.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:09.680Z,1478840649.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2016-11-11T05:04:09.681Z,1478840649.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:10.074Z,1478840650.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:10.485Z,1478840650.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:10.881Z,1478840650.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:11.310Z,1478840651.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:11.693Z,1478840651.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:12.093Z,1478840652.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:12.485Z,1478840652.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:12.870Z,1478840652.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:13.270Z,1478840653.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:13.672Z,1478840653.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:14.104Z,1478840654.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:14.489Z,1478840654.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:14.883Z,1478840654.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:15.270Z,1478840655.270 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T05:04:15.271Z,1478840655.271 [BPC1] Data Fault, FailCount= 1
2016-11-11T05:04:15.271Z,1478840655.271 [BPC1](ERROR): Data Fault
2016-11-11T05:04:15.279Z,1478840655.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:15.316Z,1478840655.316 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:04:15.685Z,1478840655.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:16.085Z,1478840656.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:16.479Z,1478840656.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:16.496Z,1478840656.496 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:04:16.496Z,1478840656.496 [BPC1] No Fault, FailCount= 1
2016-11-11T05:04:16.922Z,1478840656.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:17.327Z,1478840657.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:17.696Z,1478840657.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:18.092Z,1478840658.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:18.489Z,1478840658.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:18.888Z,1478840658.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:19.282Z,1478840659.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:19.689Z,1478840659.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:20.092Z,1478840660.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:20.496Z,1478840660.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:20.891Z,1478840660.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:21.288Z,1478840661.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:21.682Z,1478840661.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:22.089Z,1478840662.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:22.488Z,1478840662.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:22.882Z,1478840662.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:23.291Z,1478840663.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:23.692Z,1478840663.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:24.101Z,1478840664.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:24.502Z,1478840664.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:24.870Z,1478840664.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:25.278Z,1478840665.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:25.681Z,1478840665.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:26.105Z,1478840666.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:26.485Z,1478840666.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:26.886Z,1478840666.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:27.285Z,1478840667.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:27.678Z,1478840667.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:28.081Z,1478840668.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:28.482Z,1478840668.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:28.882Z,1478840668.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:29.330Z,1478840669.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:29.733Z,1478840669.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:30.095Z,1478840670.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:33.374Z,1478840673.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:33.497Z,1478840673.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:33.885Z,1478840673.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:34.284Z,1478840674.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:34.657Z,1478840674.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:35.052Z,1478840675.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:35.445Z,1478840675.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:35.848Z,1478840675.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:36.249Z,1478840676.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:36.645Z,1478840676.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:37.057Z,1478840677.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:37.462Z,1478840677.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:37.858Z,1478840677.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:38.245Z,1478840678.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:38.649Z,1478840678.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:39.056Z,1478840679.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:39.454Z,1478840679.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:39.853Z,1478840679.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:40.260Z,1478840680.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:40.663Z,1478840680.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:41.063Z,1478840681.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:41.457Z,1478840681.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:41.856Z,1478840681.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:42.257Z,1478840682.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:42.661Z,1478840682.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:43.059Z,1478840683.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:43.462Z,1478840683.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:43.864Z,1478840683.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:44.245Z,1478840684.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:44.661Z,1478840684.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:45.042Z,1478840685.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:45.436Z,1478840685.436 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T05:04:45.436Z,1478840685.436 [BPC1] Data Fault, FailCount= 1
2016-11-11T05:04:45.436Z,1478840685.436 [BPC1](ERROR): Data Fault
2016-11-11T05:04:45.444Z,1478840685.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:45.493Z,1478840685.493 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:04:45.845Z,1478840685.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:46.251Z,1478840686.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:46.651Z,1478840686.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:46.684Z,1478840686.684 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:04:46.684Z,1478840686.684 [BPC1] No Fault, FailCount= 1
2016-11-11T05:04:47.130Z,1478840687.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:47.470Z,1478840687.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:47.851Z,1478840687.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:48.250Z,1478840688.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:48.659Z,1478840688.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:49.069Z,1478840689.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:49.460Z,1478840689.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:49.862Z,1478840689.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:50.246Z,1478840690.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:50.638Z,1478840690.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:51.070Z,1478840691.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:51.461Z,1478840691.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:51.868Z,1478840691.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:52.252Z,1478840692.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:52.652Z,1478840692.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:53.057Z,1478840693.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:53.454Z,1478840693.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:53.846Z,1478840693.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:54.256Z,1478840694.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:54.653Z,1478840694.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:55.058Z,1478840695.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:55.457Z,1478840695.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:55.862Z,1478840695.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:56.245Z,1478840696.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:56.650Z,1478840696.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:57.057Z,1478840697.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:57.456Z,1478840697.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:57.845Z,1478840697.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:58.273Z,1478840698.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:58.660Z,1478840698.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:59.066Z,1478840699.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:59.468Z,1478840699.468 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T05:04:59.468Z,1478840699.468 [BPC1] Data Fault, FailCount= 2
2016-11-11T05:04:59.468Z,1478840699.468 [BPC1](ERROR): Data Fault
2016-11-11T05:04:59.499Z,1478840699.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:04:59.524Z,1478840699.524 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:04:59.838Z,1478840699.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:00.238Z,1478840700.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:00.645Z,1478840700.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:00.689Z,1478840700.689 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:05:00.689Z,1478840700.689 [BPC1] No Fault, FailCount= 2
2016-11-11T05:05:01.121Z,1478840701.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:01.465Z,1478840701.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:01.878Z,1478840701.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:02.241Z,1478840702.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:02.645Z,1478840702.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:03.046Z,1478840703.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:03.445Z,1478840703.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:03.852Z,1478840703.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:04.257Z,1478840704.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:04.653Z,1478840704.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:05.048Z,1478840705.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:05.444Z,1478840705.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:05.846Z,1478840705.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:06.250Z,1478840706.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:06.645Z,1478840706.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:07.057Z,1478840707.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:07.458Z,1478840707.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:07.858Z,1478840707.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:08.246Z,1478840708.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:08.650Z,1478840708.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:09.051Z,1478840709.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:09.446Z,1478840709.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:09.858Z,1478840709.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:10.262Z,1478840710.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:10.658Z,1478840710.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:11.051Z,1478840711.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:11.453Z,1478840711.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:11.856Z,1478840711.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:12.250Z,1478840712.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:12.661Z,1478840712.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:13.069Z,1478840713.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:13.493Z,1478840713.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:13.876Z,1478840713.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:14.245Z,1478840714.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:14.682Z,1478840714.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:15.049Z,1478840715.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:15.483Z,1478840715.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:15.890Z,1478840715.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:16.250Z,1478840716.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:16.657Z,1478840716.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:17.045Z,1478840717.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:17.445Z,1478840717.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:17.852Z,1478840717.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:18.250Z,1478840718.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:18.649Z,1478840718.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:19.058Z,1478840719.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:19.461Z,1478840719.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:19.858Z,1478840719.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:20.246Z,1478840720.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:20.650Z,1478840720.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:21.057Z,1478840721.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:21.445Z,1478840721.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:21.865Z,1478840721.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:22.259Z,1478840722.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:22.659Z,1478840722.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:23.046Z,1478840723.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:23.460Z,1478840723.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:23.846Z,1478840723.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:24.254Z,1478840724.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:24.651Z,1478840724.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:25.066Z,1478840725.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:25.458Z,1478840725.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:25.861Z,1478840725.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:26.250Z,1478840726.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:26.655Z,1478840726.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:27.054Z,1478840727.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:27.454Z,1478840727.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:27.925Z,1478840727.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:28.272Z,1478840728.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:28.703Z,1478840728.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:29.038Z,1478840729.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:29.478Z,1478840729.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:29.840Z,1478840729.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:30.278Z,1478840730.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:33.489Z,1478840733.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:33.625Z,1478840733.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:34.023Z,1478840734.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:34.426Z,1478840734.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:34.797Z,1478840734.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:35.203Z,1478840735.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:35.600Z,1478840735.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:36.013Z,1478840736.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:36.417Z,1478840736.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:36.810Z,1478840736.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:37.207Z,1478840737.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:37.605Z,1478840737.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:38.009Z,1478840738.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:38.408Z,1478840738.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:38.814Z,1478840738.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:39.245Z,1478840739.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:39.618Z,1478840739.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:40.008Z,1478840740.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:40.409Z,1478840740.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:40.810Z,1478840740.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:41.213Z,1478840741.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:41.615Z,1478840741.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:42.065Z,1478840742.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:42.465Z,1478840742.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:42.830Z,1478840742.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:43.229Z,1478840743.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:43.597Z,1478840743.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:44.033Z,1478840744.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:44.435Z,1478840744.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:44.828Z,1478840744.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:45.213Z,1478840745.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:45.633Z,1478840745.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:45.667Z,1478840745.667 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T05:05:46.001Z,1478840746.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:46.402Z,1478840746.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:46.803Z,1478840746.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:47.207Z,1478840747.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:47.602Z,1478840747.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:48.021Z,1478840748.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:48.413Z,1478840748.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:48.815Z,1478840748.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:49.213Z,1478840749.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:49.611Z,1478840749.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:50.005Z,1478840750.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:50.408Z,1478840750.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:50.821Z,1478840750.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:51.215Z,1478840751.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:51.618Z,1478840751.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:52.016Z,1478840752.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:52.410Z,1478840752.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:52.812Z,1478840752.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:53.213Z,1478840753.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:53.606Z,1478840753.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:54.017Z,1478840754.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:54.425Z,1478840754.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:54.818Z,1478840754.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:55.213Z,1478840755.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:55.246Z,1478840755.246 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T05:05:55.246Z,1478840755.246 [Rowe_600LCM] No Fault, FailCount= 5
2016-11-11T05:05:55.587Z,1478840755.587 [Rowe_600LCM](INFO): Initializing
2016-11-11T05:05:55.588Z,1478840755.588 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T05:05:55.588Z,1478840755.588 [Rowe_600LCM](INFO): LCM OK
2016-11-11T05:05:55.588Z,1478840755.588 [Rowe_600LCM](INFO): Powering up
2016-11-11T05:05:55.613Z,1478840755.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:56.008Z,1478840756.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:56.461Z,1478840756.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:56.827Z,1478840756.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:57.249Z,1478840757.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:57.625Z,1478840757.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:58.038Z,1478840758.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:58.442Z,1478840758.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:58.797Z,1478840758.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:59.202Z,1478840759.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:59.605Z,1478840759.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:05:59.755Z,1478840759.755 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T05:05:59.824Z,1478840759.824 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T05:05:59.826Z,1478840759.826 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T05:05:59.827Z,1478840759.827 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T05:05:59.828Z,1478840759.828 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T05:06:00.021Z,1478840760.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:00.415Z,1478840760.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:00.821Z,1478840760.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:01.204Z,1478840761.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:01.613Z,1478840761.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:02.007Z,1478840762.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:02.404Z,1478840762.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:02.829Z,1478840762.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:03.223Z,1478840763.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:03.617Z,1478840763.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:04.012Z,1478840764.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:04.413Z,1478840764.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:04.810Z,1478840764.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:05.195Z,1478840765.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:05.619Z,1478840765.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:06.025Z,1478840766.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:06.436Z,1478840766.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:06.840Z,1478840766.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:07.203Z,1478840767.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:07.602Z,1478840767.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:08.009Z,1478840768.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:08.403Z,1478840768.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:08.813Z,1478840768.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:09.208Z,1478840769.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:09.613Z,1478840769.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:10.009Z,1478840770.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:10.457Z,1478840770.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:10.812Z,1478840770.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:11.252Z,1478840771.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:11.613Z,1478840771.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:12.057Z,1478840772.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:12.438Z,1478840772.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:12.820Z,1478840772.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:13.206Z,1478840773.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:13.621Z,1478840773.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:14.016Z,1478840774.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:14.394Z,1478840774.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:14.824Z,1478840774.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:15.225Z,1478840775.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:15.626Z,1478840775.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:16.015Z,1478840776.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:16.412Z,1478840776.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:16.810Z,1478840776.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:17.213Z,1478840777.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:17.613Z,1478840777.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:18.022Z,1478840778.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:18.414Z,1478840778.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:18.828Z,1478840778.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:19.210Z,1478840779.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:19.616Z,1478840779.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:20.017Z,1478840780.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:20.411Z,1478840780.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:20.825Z,1478840780.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:21.222Z,1478840781.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:21.620Z,1478840781.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:22.022Z,1478840782.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:22.288Z,1478840782.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:06:22.398Z,1478840782.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:22.806Z,1478840782.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:23.084Z,1478840783.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:06:23.203Z,1478840783.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:23.601Z,1478840783.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:23.961Z,1478840783.961 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T05:06:23.961Z,1478840783.961 [NAL9602] Data Fault, FailCount= 2
2016-11-11T05:06:23.961Z,1478840783.961 [NAL9602](ERROR): Data Fault
2016-11-11T05:06:24.005Z,1478840784.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:24.046Z,1478840784.046 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T05:06:24.365Z,1478840784.365 [NAL9602](INFO): Powering down
2016-11-11T05:06:24.461Z,1478840784.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:24.803Z,1478840784.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:25.230Z,1478840785.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:25.258Z,1478840785.258 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T05:06:25.258Z,1478840785.258 [NAL9602] No Fault, FailCount= 2
2016-11-11T05:06:25.610Z,1478840785.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:26.046Z,1478840786.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:26.429Z,1478840786.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:26.808Z,1478840786.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:27.209Z,1478840787.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:27.601Z,1478840787.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:28.009Z,1478840788.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:28.412Z,1478840788.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:28.809Z,1478840788.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:29.218Z,1478840789.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:29.561Z,1478840789.561 [NAL9602](INFO): Powering up NAL9602
2016-11-11T05:06:29.623Z,1478840789.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:29.629Z,1478840789.629 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T05:01:29.2Z
2016-11-11T05:06:29.629Z,1478840789.629 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T05:06:29.629Z,1478840789.629 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T05:06:30.020Z,1478840790.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:30.865Z,1478840790.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:34.074Z,1478840794.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:34.116Z,1478840794.116 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0008.lzma
2016-11-11T05:06:34.208Z,1478840794.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:34.561Z,1478840794.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:34.900Z,1478840794.901 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0008.lzma.bak
2016-11-11T05:06:34.901Z,1478840794.901 [DataOverHttps](INFO): SBD MOMSN=4555026
2016-11-11T05:06:34.969Z,1478840794.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:36.363Z,1478840796.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:36.497Z,1478840796.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:39.997Z,1478840799.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:40.145Z,1478840800.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:40.445Z,1478840800.445 [NAL9602](INFO): NAL9602 initialized
2016-11-11T05:06:40.505Z,1478840800.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:40.930Z,1478840800.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:41.300Z,1478840801.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:41.736Z,1478840801.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:45.082Z,1478840805.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:45.108Z,1478840805.108 [DataOverHttps](INFO): Sending 311 bytes from file Logs/20161111T044527/Express0009.lzma
2016-11-11T05:06:45.229Z,1478840805.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:45.550Z,1478840805.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:45.909Z,1478840805.909 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0009.lzma.bak
2016-11-11T05:06:45.909Z,1478840805.909 [DataOverHttps](INFO): SBD MOMSN=4555028
2016-11-11T05:06:45.988Z,1478840805.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:47.271Z,1478840807.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:47.300Z,1478840807.300 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T05:06:47.300Z,1478840807.300 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T05:06:47.300Z,1478840807.300 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T05:06:47.402Z,1478840807.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:50.758Z,1478840810.758 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:50.758Z,1478840810.758 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2016-11-11T05:06:50.758Z,1478840810.758 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:06:50.761Z,1478840810.761 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:50.761Z,1478840810.761 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2016-11-11T05:06:50.761Z,1478840810.761 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T05:06:50.763Z,1478840810.763 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:50.763Z,1478840810.763 [DeadReckonWithRespectToWater] Software Fault, FailCount= 7
2016-11-11T05:06:50.763Z,1478840810.763 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T05:06:50.765Z,1478840810.765 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:50.765Z,1478840810.765 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2016-11-11T05:06:50.765Z,1478840810.765 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:06:50.767Z,1478840810.767 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:50.767Z,1478840810.767 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 7
2016-11-11T05:06:50.767Z,1478840810.767 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:06:50.781Z,1478840810.781 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:06:50.781Z,1478840810.781 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T05:06:50.781Z,1478840810.782 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T05:06:50.782Z,1478840810.782 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:06:50.782Z,1478840810.782 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:06:50.977Z,1478840810.977 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:06:50.977Z,1478840810.977 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2016-11-11T05:06:50.978Z,1478840810.978 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T05:06:50.978Z,1478840810.978 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2016-11-11T05:06:50.978Z,1478840810.978 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T05:06:50.978Z,1478840810.978 [DeadReckonWithRespectToWater] No Fault, FailCount= 7
2016-11-11T05:06:50.983Z,1478840810.983 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:06:50.983Z,1478840810.983 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2016-11-11T05:06:50.984Z,1478840810.984 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:06:50.984Z,1478840810.984 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 7
2016-11-11T05:06:51.268Z,1478840811.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:06:51.268Z,1478840811.268 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:06:51.269Z,1478840811.269 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:06:51.269Z,1478840811.269 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T05:06:51.269Z,1478840811.269 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:06:51.270Z,1478840811.270 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:06:51.270Z,1478840811.270 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T05:06:51.271Z,1478840811.271 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:06:51.271Z,1478840811.271 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:06:51.271Z,1478840811.271 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:06:51.272Z,1478840811.272 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:06:51.272Z,1478840811.272 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:06:51.273Z,1478840811.273 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:06:51.273Z,1478840811.273 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:06:51.273Z,1478840811.273 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:06:51.669Z,1478840811.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:52.041Z,1478840812.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:52.438Z,1478840812.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:52.849Z,1478840812.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:53.253Z,1478840813.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:53.649Z,1478840813.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:54.048Z,1478840814.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:54.448Z,1478840814.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:54.840Z,1478840814.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:55.242Z,1478840815.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:55.645Z,1478840815.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:56.053Z,1478840816.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:56.455Z,1478840816.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:56.854Z,1478840816.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:57.281Z,1478840817.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:57.653Z,1478840817.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:58.069Z,1478840818.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:58.458Z,1478840818.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:58.873Z,1478840818.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:59.273Z,1478840819.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:06:59.649Z,1478840819.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:00.048Z,1478840820.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:00.437Z,1478840820.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:00.841Z,1478840820.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:01.253Z,1478840821.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:01.639Z,1478840821.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:02.056Z,1478840822.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:02.460Z,1478840822.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:02.853Z,1478840822.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:03.248Z,1478840823.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:03.638Z,1478840823.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:04.047Z,1478840824.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:04.447Z,1478840824.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:04.841Z,1478840824.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:05.254Z,1478840825.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:05.658Z,1478840825.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:06.067Z,1478840826.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:06.430Z,1478840826.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:06.833Z,1478840826.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:07.234Z,1478840827.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:07.645Z,1478840827.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:08.071Z,1478840828.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:08.446Z,1478840828.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:08.850Z,1478840828.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:09.245Z,1478840829.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:09.645Z,1478840829.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:10.050Z,1478840830.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:10.449Z,1478840830.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:10.857Z,1478840830.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:11.305Z,1478840831.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:11.645Z,1478840831.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:12.042Z,1478840832.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:12.469Z,1478840832.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:12.836Z,1478840832.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:13.274Z,1478840833.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:13.670Z,1478840833.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:14.053Z,1478840834.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:14.450Z,1478840834.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:14.852Z,1478840834.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:15.253Z,1478840835.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:15.655Z,1478840835.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:16.053Z,1478840836.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:16.449Z,1478840836.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:16.850Z,1478840836.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:17.254Z,1478840837.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:17.653Z,1478840837.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:18.069Z,1478840838.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:18.433Z,1478840838.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:18.837Z,1478840838.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:19.237Z,1478840839.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:19.761Z,1478840839.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:20.067Z,1478840840.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:20.453Z,1478840840.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:20.844Z,1478840840.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:21.233Z,1478840841.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:21.633Z,1478840841.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:22.034Z,1478840842.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:22.433Z,1478840842.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:22.854Z,1478840842.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:23.245Z,1478840843.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:23.647Z,1478840843.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:24.088Z,1478840844.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:24.437Z,1478840844.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:24.834Z,1478840844.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:25.257Z,1478840845.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:25.664Z,1478840845.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:26.043Z,1478840846.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:26.473Z,1478840846.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:26.890Z,1478840846.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:27.273Z,1478840847.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:27.633Z,1478840847.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:28.061Z,1478840848.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:28.433Z,1478840848.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:28.843Z,1478840848.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:29.251Z,1478840849.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:29.647Z,1478840849.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:30.033Z,1478840850.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:30.429Z,1478840850.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:30.833Z,1478840850.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:31.231Z,1478840851.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:31.633Z,1478840851.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:32.067Z,1478840852.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:32.458Z,1478840852.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:32.841Z,1478840852.841 [PNI_TCM](ERROR): CRC does not match. Expected:0x35438 got:0x22595
2016-11-11T05:07:32.894Z,1478840852.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:33.249Z,1478840853.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:33.633Z,1478840853.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:34.030Z,1478840854.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:34.437Z,1478840854.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:34.849Z,1478840854.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:35.252Z,1478840855.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:35.668Z,1478840855.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:36.046Z,1478840856.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:36.449Z,1478840856.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:36.829Z,1478840856.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:37.238Z,1478840857.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:37.633Z,1478840857.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:38.048Z,1478840858.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:38.447Z,1478840858.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:38.850Z,1478840858.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:39.254Z,1478840859.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:39.698Z,1478840859.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:40.088Z,1478840860.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:40.477Z,1478840860.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:40.861Z,1478840860.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:41.281Z,1478840861.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:41.681Z,1478840861.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:42.050Z,1478840862.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:42.449Z,1478840862.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:42.847Z,1478840862.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:43.247Z,1478840863.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:43.641Z,1478840863.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:44.072Z,1478840864.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:44.456Z,1478840864.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:44.864Z,1478840864.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:45.243Z,1478840865.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:45.623Z,1478840865.623 [PNI_TCM](ERROR): CRC does not match. Expected:0x49713 got:0x45085
2016-11-11T05:07:45.648Z,1478840865.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:46.069Z,1478840866.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:46.454Z,1478840866.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:46.855Z,1478840866.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:47.249Z,1478840867.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:47.660Z,1478840867.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:48.052Z,1478840868.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:51.489Z,1478840871.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:51.621Z,1478840871.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:52.029Z,1478840872.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:52.420Z,1478840872.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:52.796Z,1478840872.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:53.193Z,1478840873.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:53.649Z,1478840873.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:53.998Z,1478840873.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:54.394Z,1478840874.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:54.832Z,1478840874.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:55.228Z,1478840875.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:55.634Z,1478840875.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:56.022Z,1478840876.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:56.409Z,1478840876.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:56.799Z,1478840876.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:57.197Z,1478840877.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:57.631Z,1478840877.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:58.006Z,1478840878.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:58.409Z,1478840878.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:58.813Z,1478840878.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:59.198Z,1478840879.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:07:59.597Z,1478840879.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:00.006Z,1478840880.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:00.414Z,1478840880.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:00.812Z,1478840880.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:01.218Z,1478840881.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:01.612Z,1478840881.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:02.035Z,1478840882.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:02.412Z,1478840882.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:02.816Z,1478840882.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:03.217Z,1478840883.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:03.619Z,1478840883.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:04.012Z,1478840884.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:04.420Z,1478840884.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:04.794Z,1478840884.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:05.205Z,1478840885.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:05.600Z,1478840885.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:06.001Z,1478840886.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:06.401Z,1478840886.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:06.836Z,1478840886.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:07.211Z,1478840887.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:07.617Z,1478840887.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:08.037Z,1478840888.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:08.449Z,1478840888.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:08.809Z,1478840888.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:09.210Z,1478840889.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:09.621Z,1478840889.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:10.046Z,1478840890.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:10.406Z,1478840890.406 [PNI_TCM](ERROR): CRC does not match. Expected:0x45946 got:0x64249
2016-11-11T05:08:10.457Z,1478840890.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:10.803Z,1478840890.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:11.207Z,1478840891.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:11.607Z,1478840891.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:11.998Z,1478840891.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:12.411Z,1478840892.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:12.817Z,1478840892.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:13.218Z,1478840893.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:13.679Z,1478840893.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:14.014Z,1478840894.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:14.410Z,1478840894.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:14.824Z,1478840894.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:15.213Z,1478840895.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:15.618Z,1478840895.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:16.071Z,1478840896.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:16.423Z,1478840896.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:16.828Z,1478840896.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:17.226Z,1478840897.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:17.616Z,1478840897.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:18.018Z,1478840898.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:18.401Z,1478840898.401 [PNI_TCM](ERROR): CRC does not match. Expected:0x12590 got:0x12971
2016-11-11T05:08:18.444Z,1478840898.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:18.827Z,1478840898.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:19.220Z,1478840899.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:19.634Z,1478840899.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:20.024Z,1478840900.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:20.410Z,1478840900.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:20.833Z,1478840900.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:21.199Z,1478840901.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:21.611Z,1478840901.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:22.030Z,1478840902.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:22.465Z,1478840902.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:22.798Z,1478840902.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:23.238Z,1478840903.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:23.605Z,1478840903.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:24.042Z,1478840904.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:24.457Z,1478840904.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:24.809Z,1478840904.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:25.264Z,1478840905.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:25.627Z,1478840905.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:26.020Z,1478840906.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:26.414Z,1478840906.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:26.810Z,1478840906.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:27.209Z,1478840907.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:27.714Z,1478840907.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:28.029Z,1478840908.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:28.421Z,1478840908.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:28.785Z,1478840908.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:29.217Z,1478840909.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:29.650Z,1478840909.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:30.011Z,1478840910.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:30.389Z,1478840910.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:30.805Z,1478840910.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:31.204Z,1478840911.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:31.609Z,1478840911.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:31.990Z,1478840911.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:32.393Z,1478840912.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:32.792Z,1478840912.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:33.190Z,1478840913.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:33.604Z,1478840913.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:33.999Z,1478840913.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:34.404Z,1478840914.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:34.805Z,1478840914.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:35.190Z,1478840915.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:35.596Z,1478840915.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:35.990Z,1478840915.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:36.430Z,1478840916.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:36.800Z,1478840916.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:37.241Z,1478840917.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:37.605Z,1478840917.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:38.021Z,1478840918.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:38.390Z,1478840918.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:38.814Z,1478840918.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:39.186Z,1478840919.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:39.604Z,1478840919.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:40.073Z,1478840920.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:40.404Z,1478840920.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:40.790Z,1478840920.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:41.190Z,1478840921.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:41.597Z,1478840921.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:41.987Z,1478840921.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:42.389Z,1478840922.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:42.800Z,1478840922.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:43.204Z,1478840923.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:43.615Z,1478840923.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:43.983Z,1478840923.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:44.389Z,1478840924.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:44.786Z,1478840924.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:45.190Z,1478840925.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:45.604Z,1478840925.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:46.003Z,1478840926.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:46.404Z,1478840926.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:46.790Z,1478840926.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:47.190Z,1478840927.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:47.590Z,1478840927.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:47.987Z,1478840927.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:48.390Z,1478840928.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:54.623Z,1478840934.623 [BPC1](ERROR): Failed to receive battery data
2016-11-11T05:08:54.623Z,1478840934.623 [BPC1] Communications Fault, FailCount= 1
2016-11-11T05:08:54.623Z,1478840934.623 [BPC1](ERROR): Communications Fault
2016-11-11T05:08:54.641Z,1478840934.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:54.674Z,1478840934.674 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T05:08:54.769Z,1478840934.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:55.165Z,1478840935.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:55.553Z,1478840935.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:55.645Z,1478840935.645 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:08:55.645Z,1478840935.645 [BPC1] No Fault, FailCount= 1
2016-11-11T05:08:55.990Z,1478840935.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:56.377Z,1478840936.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:56.738Z,1478840936.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:57.135Z,1478840937.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:57.547Z,1478840937.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:57.961Z,1478840937.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:58.350Z,1478840938.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:58.747Z,1478840938.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:59.127Z,1478840939.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:59.550Z,1478840939.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:08:59.920Z,1478840939.920 [PNI_TCM](ERROR): CRC does not match. Expected:0x33730 got:0x10141
2016-11-11T05:08:59.958Z,1478840939.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:00.328Z,1478840940.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:00.755Z,1478840940.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:01.159Z,1478840941.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:01.558Z,1478840941.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:01.937Z,1478840941.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:02.337Z,1478840942.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:02.737Z,1478840942.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:03.135Z,1478840943.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:03.546Z,1478840943.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:03.948Z,1478840943.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:04.363Z,1478840944.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:04.738Z,1478840944.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:05.144Z,1478840945.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:05.529Z,1478840945.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:05.933Z,1478840945.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:06.332Z,1478840946.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:06.742Z,1478840946.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:07.139Z,1478840947.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:07.593Z,1478840947.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:07.935Z,1478840947.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:08.345Z,1478840948.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:08.777Z,1478840948.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:09.138Z,1478840949.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:09.646Z,1478840949.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:09.981Z,1478840949.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:10.353Z,1478840950.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:10.745Z,1478840950.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:11.136Z,1478840951.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:11.597Z,1478840951.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:11.957Z,1478840951.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:12.328Z,1478840952.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:12.753Z,1478840952.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:13.139Z,1478840953.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:13.550Z,1478840953.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:13.939Z,1478840953.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:14.336Z,1478840954.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:14.734Z,1478840954.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:15.138Z,1478840955.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:15.548Z,1478840955.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:15.951Z,1478840955.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:16.351Z,1478840956.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:16.749Z,1478840956.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:17.128Z,1478840957.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:17.541Z,1478840957.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:17.934Z,1478840957.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:18.341Z,1478840958.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:18.745Z,1478840958.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:19.153Z,1478840959.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:19.549Z,1478840959.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:19.952Z,1478840959.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:20.349Z,1478840960.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:20.773Z,1478840960.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:21.157Z,1478840961.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:21.546Z,1478840961.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:21.986Z,1478840961.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:22.350Z,1478840962.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:22.758Z,1478840962.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:23.185Z,1478840963.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:23.597Z,1478840963.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:23.949Z,1478840963.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:24.329Z,1478840964.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:24.760Z,1478840964.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:25.161Z,1478840965.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:25.610Z,1478840965.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:25.929Z,1478840965.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:26.330Z,1478840966.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:26.735Z,1478840966.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:27.134Z,1478840967.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:27.549Z,1478840967.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:27.956Z,1478840967.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:28.349Z,1478840968.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:28.743Z,1478840968.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:29.141Z,1478840969.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:29.530Z,1478840969.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:29.938Z,1478840969.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:30.333Z,1478840970.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:30.740Z,1478840970.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:31.194Z,1478840971.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:31.547Z,1478840971.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:31.933Z,1478840971.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:32.349Z,1478840972.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:32.726Z,1478840972.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:33.129Z,1478840973.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:33.543Z,1478840973.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:33.989Z,1478840973.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:34.343Z,1478840974.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:34.766Z,1478840974.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:35.133Z,1478840975.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:35.596Z,1478840975.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:35.981Z,1478840975.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:36.338Z,1478840976.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:36.747Z,1478840976.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:37.157Z,1478840977.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:37.600Z,1478840977.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:37.942Z,1478840977.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:38.345Z,1478840978.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:38.734Z,1478840978.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:39.125Z,1478840979.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:39.600Z,1478840979.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:39.962Z,1478840979.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:40.339Z,1478840980.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:40.733Z,1478840980.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:41.182Z,1478840981.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:41.536Z,1478840981.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:41.933Z,1478840981.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:42.340Z,1478840982.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:42.752Z,1478840982.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:43.210Z,1478840983.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:43.547Z,1478840983.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:43.938Z,1478840983.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:44.340Z,1478840984.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:44.738Z,1478840984.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:45.187Z,1478840985.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:45.557Z,1478840985.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:45.950Z,1478840985.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:46.405Z,1478840986.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:46.725Z,1478840986.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:47.193Z,1478840987.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:47.537Z,1478840987.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:47.953Z,1478840987.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:48.357Z,1478840988.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:48.747Z,1478840988.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:52.161Z,1478840992.161 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:52.161Z,1478840992.161 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2016-11-11T05:09:52.161Z,1478840992.161 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:09:52.163Z,1478840992.163 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:52.163Z,1478840992.163 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2016-11-11T05:09:52.163Z,1478840992.164 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T05:09:52.166Z,1478840992.165 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:52.166Z,1478840992.166 [DeadReckonWithRespectToWater] Software Fault, FailCount= 8
2016-11-11T05:09:52.166Z,1478840992.166 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T05:09:52.168Z,1478840992.168 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:52.168Z,1478840992.168 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2016-11-11T05:09:52.168Z,1478840992.168 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:09:52.170Z,1478840992.170 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:52.170Z,1478840992.170 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 8
2016-11-11T05:09:52.170Z,1478840992.170 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:09:52.212Z,1478840992.212 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:09:52.212Z,1478840992.212 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T05:09:52.213Z,1478840992.213 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T05:09:52.213Z,1478840992.213 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:09:52.213Z,1478840992.213 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:09:52.329Z,1478840992.329 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:09:52.330Z,1478840992.330 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2016-11-11T05:09:52.330Z,1478840992.330 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T05:09:52.330Z,1478840992.330 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2016-11-11T05:09:52.331Z,1478840992.331 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T05:09:52.335Z,1478840992.335 [DeadReckonWithRespectToWater] No Fault, FailCount= 8
2016-11-11T05:09:52.336Z,1478840992.336 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:09:52.336Z,1478840992.336 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2016-11-11T05:09:52.336Z,1478840992.336 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:09:52.337Z,1478840992.337 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 8
2016-11-11T05:09:52.670Z,1478840992.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:09:52.670Z,1478840992.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:09:52.671Z,1478840992.671 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:09:52.671Z,1478840992.671 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T05:09:52.672Z,1478840992.672 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:09:52.672Z,1478840992.672 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:09:52.672Z,1478840992.672 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T05:09:52.673Z,1478840992.673 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:09:52.673Z,1478840992.673 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:09:52.674Z,1478840992.674 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:09:52.674Z,1478840992.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:09:52.674Z,1478840992.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:09:52.675Z,1478840992.675 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:09:52.675Z,1478840992.675 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:09:52.676Z,1478840992.676 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:09:53.085Z,1478840993.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:53.501Z,1478840993.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:53.877Z,1478840993.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:54.281Z,1478840994.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:54.683Z,1478840994.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:55.088Z,1478840995.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:55.489Z,1478840995.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:55.870Z,1478840995.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:56.269Z,1478840996.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:56.686Z,1478840996.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:57.076Z,1478840997.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:57.475Z,1478840997.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:57.888Z,1478840997.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:58.284Z,1478840998.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:58.676Z,1478840998.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:59.169Z,1478840999.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:59.472Z,1478840999.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:09:59.905Z,1478840999.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:00.291Z,1478841000.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:00.720Z,1478841000.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:01.145Z,1478841001.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:01.495Z,1478841001.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:01.862Z,1478841001.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:02.289Z,1478841002.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:02.662Z,1478841002.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:03.097Z,1478841003.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:03.492Z,1478841003.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:03.894Z,1478841003.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:04.291Z,1478841004.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:04.420Z,1478841004.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:10:04.669Z,1478841004.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:05.073Z,1478841005.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:05.216Z,1478841005.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:10:05.528Z,1478841005.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:05.874Z,1478841005.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:06.273Z,1478841006.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:06.688Z,1478841006.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:07.082Z,1478841007.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:07.520Z,1478841007.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:07.865Z,1478841007.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:08.269Z,1478841008.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:08.676Z,1478841008.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:09.140Z,1478841009.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:09.485Z,1478841009.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:09.889Z,1478841009.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:10.282Z,1478841010.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:10.670Z,1478841010.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:11.113Z,1478841011.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:11.509Z,1478841011.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:11.913Z,1478841011.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:12.274Z,1478841012.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:12.717Z,1478841012.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:13.126Z,1478841013.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:13.517Z,1478841013.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:13.897Z,1478841013.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:14.274Z,1478841014.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:14.681Z,1478841014.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:15.121Z,1478841015.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:15.486Z,1478841015.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:15.894Z,1478841015.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:16.289Z,1478841016.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:16.685Z,1478841016.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:17.061Z,1478841017.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:17.470Z,1478841017.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:17.870Z,1478841017.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:18.280Z,1478841018.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:18.683Z,1478841018.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:19.084Z,1478841019.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:19.530Z,1478841019.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:19.869Z,1478841019.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:20.269Z,1478841020.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:20.685Z,1478841020.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:21.080Z,1478841021.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:21.515Z,1478841021.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:21.893Z,1478841021.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:22.292Z,1478841022.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:22.669Z,1478841022.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:23.125Z,1478841023.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:23.468Z,1478841023.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:23.870Z,1478841023.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:24.271Z,1478841024.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:24.733Z,1478841024.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:25.124Z,1478841025.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:25.513Z,1478841025.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:25.869Z,1478841025.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:26.299Z,1478841026.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:26.706Z,1478841026.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:27.125Z,1478841027.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:27.482Z,1478841027.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:27.889Z,1478841027.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:28.284Z,1478841028.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:28.676Z,1478841028.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:29.109Z,1478841029.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:29.469Z,1478841029.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:29.869Z,1478841029.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:30.275Z,1478841030.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:30.675Z,1478841030.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:31.080Z,1478841031.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:31.477Z,1478841031.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:31.870Z,1478841031.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:32.285Z,1478841032.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:32.682Z,1478841032.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:33.082Z,1478841033.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:33.521Z,1478841033.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:33.882Z,1478841033.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:34.285Z,1478841034.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:34.682Z,1478841034.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:35.090Z,1478841035.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:35.502Z,1478841035.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:35.861Z,1478841035.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:36.294Z,1478841036.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:36.687Z,1478841036.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:37.135Z,1478841037.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:37.541Z,1478841037.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:37.880Z,1478841037.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:38.307Z,1478841038.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:38.685Z,1478841038.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:39.161Z,1478841039.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:39.502Z,1478841039.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:39.873Z,1478841039.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:40.277Z,1478841040.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:40.669Z,1478841040.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:41.141Z,1478841041.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:41.492Z,1478841041.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:41.876Z,1478841041.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:42.281Z,1478841042.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:42.666Z,1478841042.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:43.149Z,1478841043.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:43.469Z,1478841043.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:43.878Z,1478841043.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:44.281Z,1478841044.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:44.689Z,1478841044.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:45.134Z,1478841045.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:45.477Z,1478841045.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:45.878Z,1478841045.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:46.283Z,1478841046.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:46.686Z,1478841046.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:47.083Z,1478841047.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:47.496Z,1478841047.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:47.876Z,1478841047.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:48.276Z,1478841048.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:48.680Z,1478841048.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:49.085Z,1478841049.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:52.535Z,1478841052.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:52.644Z,1478841052.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:53.074Z,1478841053.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:53.453Z,1478841053.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:53.809Z,1478841053.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:54.238Z,1478841054.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:54.636Z,1478841054.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:55.040Z,1478841055.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:55.421Z,1478841055.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:55.814Z,1478841055.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:56.213Z,1478841056.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:56.608Z,1478841056.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:57.066Z,1478841057.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:57.405Z,1478841057.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:57.814Z,1478841057.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:58.223Z,1478841058.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:58.618Z,1478841058.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:59.020Z,1478841059.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:59.425Z,1478841059.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:10:59.805Z,1478841059.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:00.217Z,1478841060.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:00.598Z,1478841060.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:00.997Z,1478841060.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:01.448Z,1478841061.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:01.831Z,1478841061.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:02.223Z,1478841062.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:02.605Z,1478841062.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:03.009Z,1478841063.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:03.465Z,1478841063.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:03.813Z,1478841063.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:04.221Z,1478841064.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:04.617Z,1478841064.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:05.066Z,1478841065.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:05.464Z,1478841065.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:05.809Z,1478841065.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:06.257Z,1478841066.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:06.630Z,1478841066.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:07.116Z,1478841067.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:07.410Z,1478841067.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:07.834Z,1478841067.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:08.221Z,1478841068.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:08.625Z,1478841068.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:09.068Z,1478841069.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:09.411Z,1478841069.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:09.815Z,1478841069.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:10.225Z,1478841070.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:10.618Z,1478841070.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:11.066Z,1478841071.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:11.409Z,1478841071.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:11.810Z,1478841071.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:12.221Z,1478841072.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:12.619Z,1478841072.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:13.022Z,1478841073.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:13.402Z,1478841073.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:13.805Z,1478841073.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:14.228Z,1478841074.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:14.627Z,1478841074.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:15.032Z,1478841075.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:15.441Z,1478841075.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:15.806Z,1478841075.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:16.218Z,1478841076.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:16.621Z,1478841076.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:17.025Z,1478841077.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:17.450Z,1478841077.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:17.809Z,1478841077.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:18.237Z,1478841078.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:18.629Z,1478841078.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:19.072Z,1478841079.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:19.417Z,1478841079.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:19.826Z,1478841079.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:20.197Z,1478841080.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:20.601Z,1478841080.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:21.058Z,1478841081.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:21.441Z,1478841081.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:21.835Z,1478841081.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:22.235Z,1478841082.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:22.605Z,1478841082.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:23.050Z,1478841083.050 [BPC1](ERROR): Failed to receive battery data
2016-11-11T05:11:23.050Z,1478841083.050 [BPC1] Communications Fault, FailCount= 1
2016-11-11T05:11:23.051Z,1478841083.050 [BPC1](ERROR): Communications Fault
2016-11-11T05:11:23.064Z,1478841083.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:23.110Z,1478841083.110 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T05:11:23.406Z,1478841083.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:23.805Z,1478841083.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:24.217Z,1478841084.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:24.260Z,1478841084.260 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:11:24.260Z,1478841084.260 [BPC1] No Fault, FailCount= 1
2016-11-11T05:11:24.670Z,1478841084.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:25.093Z,1478841085.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:25.413Z,1478841085.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:25.809Z,1478841085.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:26.213Z,1478841086.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:26.609Z,1478841086.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:27.005Z,1478841087.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:27.420Z,1478841087.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:27.821Z,1478841087.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:28.219Z,1478841088.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:28.606Z,1478841088.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:29.013Z,1478841089.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:29.427Z,1478841089.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:29.813Z,1478841089.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:30.225Z,1478841090.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:30.620Z,1478841090.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:31.019Z,1478841091.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:31.426Z,1478841091.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:31.817Z,1478841091.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:32.209Z,1478841092.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:32.619Z,1478841092.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:33.039Z,1478841093.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:33.426Z,1478841093.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:33.821Z,1478841093.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:34.231Z,1478841094.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:34.597Z,1478841094.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:35.041Z,1478841095.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:35.403Z,1478841095.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:35.837Z,1478841095.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:36.211Z,1478841096.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:36.612Z,1478841096.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:37.097Z,1478841097.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:37.413Z,1478841097.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:37.812Z,1478841097.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:38.241Z,1478841098.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:38.609Z,1478841098.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:39.058Z,1478841099.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:39.469Z,1478841099.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:39.822Z,1478841099.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:40.229Z,1478841100.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:40.621Z,1478841100.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:41.044Z,1478841101.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:41.402Z,1478841101.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:41.809Z,1478841101.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:42.217Z,1478841102.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:42.612Z,1478841102.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:43.017Z,1478841103.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:43.412Z,1478841103.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:43.810Z,1478841103.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:44.209Z,1478841104.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:44.622Z,1478841104.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:45.014Z,1478841105.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:45.417Z,1478841105.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:45.821Z,1478841105.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:46.228Z,1478841106.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:46.613Z,1478841106.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:47.030Z,1478841107.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:47.410Z,1478841107.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:47.419Z,1478841107.420 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T05:11:47.420Z,1478841107.420 [Default:CheckIn:C.Wait] Stopped
2016-11-11T05:11:47.420Z,1478841107.420 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T05:11:47.420Z,1478841107.420 [Default:CheckIn:D] Running Loop=1
2016-11-11T05:11:47.821Z,1478841107.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:47.835Z,1478841107.835 [Default:CheckIn:D] Stopped
2016-11-11T05:11:47.835Z,1478841107.835 [Default:CheckIn:E] Running Loop=1
2016-11-11T05:11:48.230Z,1478841108.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:48.235Z,1478841108.235 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.775346 min 
2016-11-11T05:11:48.235Z,1478841108.236 [Default:CheckIn:E] Stopped
2016-11-11T05:11:48.236Z,1478841108.236 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T05:11:48.236Z,1478841108.236 [Default:CheckIn] Stopped
2016-11-11T05:11:48.236Z,1478841108.236 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T05:11:48.236Z,1478841108.236 [Default:CheckIn](INFO): Running loop #3
2016-11-11T05:11:48.236Z,1478841108.236 [Default:CheckIn] Running Loop=3
2016-11-11T05:11:48.236Z,1478841108.236 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T05:11:48.236Z,1478841108.236 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T05:11:48.628Z,1478841108.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:49.042Z,1478841109.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:49.406Z,1478841109.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:52.801Z,1478841112.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:52.910Z,1478841112.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:53.346Z,1478841113.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:53.721Z,1478841113.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:54.144Z,1478841114.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:54.529Z,1478841114.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:54.918Z,1478841114.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:55.321Z,1478841115.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:55.714Z,1478841115.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:56.117Z,1478841116.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:56.489Z,1478841116.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:56.893Z,1478841116.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:57.347Z,1478841117.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:57.701Z,1478841117.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:58.102Z,1478841118.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:58.531Z,1478841118.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:58.904Z,1478841118.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:59.359Z,1478841119.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:11:59.720Z,1478841119.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:00.089Z,1478841120.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:00.519Z,1478841120.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:00.946Z,1478841120.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:01.303Z,1478841121.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:01.697Z,1478841121.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:02.119Z,1478841122.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:02.493Z,1478841122.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:02.896Z,1478841122.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:03.308Z,1478841123.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:03.709Z,1478841123.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:04.113Z,1478841124.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:04.502Z,1478841124.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:04.946Z,1478841124.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:05.305Z,1478841125.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:05.713Z,1478841125.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:06.108Z,1478841126.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:06.570Z,1478841126.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:06.991Z,1478841126.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:07.341Z,1478841127.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:07.697Z,1478841127.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:08.132Z,1478841128.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:08.533Z,1478841128.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:08.897Z,1478841128.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:09.314Z,1478841129.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:09.710Z,1478841129.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:10.117Z,1478841130.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:10.502Z,1478841130.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:10.897Z,1478841130.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:11.324Z,1478841131.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:11.711Z,1478841131.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:12.089Z,1478841132.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:12.519Z,1478841132.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:12.918Z,1478841132.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:13.359Z,1478841133.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:13.709Z,1478841133.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:14.104Z,1478841134.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:14.505Z,1478841134.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:14.968Z,1478841134.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:15.311Z,1478841135.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:15.714Z,1478841135.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:16.120Z,1478841136.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:16.501Z,1478841136.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:16.974Z,1478841136.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:17.304Z,1478841137.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:17.709Z,1478841137.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:18.102Z,1478841138.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:18.521Z,1478841138.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:18.957Z,1478841138.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:19.320Z,1478841139.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:19.690Z,1478841139.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:19.779Z,1478841139.779 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T05:12:19.779Z,1478841139.779 [Rowe_600LCM] Communications Fault, FailCount= 1
2016-11-11T05:12:19.779Z,1478841139.779 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T05:12:20.101Z,1478841140.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T05:12:20.102Z,1478841140.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:20.119Z,1478841140.119 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T05:12:20.183Z,1478841140.183 [Rowe_600LCM](INFO): Powering down
2016-11-11T05:12:20.565Z,1478841140.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2016-11-11T05:12:20.566Z,1478841140.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:20.898Z,1478841140.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T05:12:20.899Z,1478841140.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:21.311Z,1478841141.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T05:12:21.312Z,1478841141.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:21.744Z,1478841141.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2016-11-11T05:12:21.746Z,1478841141.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:21.762Z,1478841141.762 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T05:12:21.762Z,1478841141.762 [Rowe_600LCM] No Fault, FailCount= 1
2016-11-11T05:12:21.799Z,1478841141.799 [Rowe_600LCM](INFO): Initializing
2016-11-11T05:12:21.800Z,1478841141.800 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T05:12:21.800Z,1478841141.800 [Rowe_600LCM](INFO): LCM OK
2016-11-11T05:12:21.800Z,1478841141.800 [Rowe_600LCM](INFO): Powering up
2016-11-11T05:12:22.120Z,1478841142.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T05:12:22.121Z,1478841142.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:22.514Z,1478841142.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T05:12:22.515Z,1478841142.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:22.921Z,1478841142.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T05:12:22.922Z,1478841142.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:23.302Z,1478841143.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T05:12:23.303Z,1478841143.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:23.709Z,1478841143.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T05:12:23.710Z,1478841143.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:24.103Z,1478841144.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T05:12:24.104Z,1478841144.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:24.516Z,1478841144.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T05:12:24.517Z,1478841144.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:24.916Z,1478841144.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T05:12:24.917Z,1478841144.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:25.313Z,1478841145.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T05:12:25.315Z,1478841145.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:25.706Z,1478841145.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T05:12:25.707Z,1478841145.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:25.922Z,1478841145.922 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T05:12:25.981Z,1478841145.981 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T05:12:25.983Z,1478841145.983 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T05:12:25.985Z,1478841145.985 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T05:12:25.987Z,1478841145.987 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T05:12:26.122Z,1478841146.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T05:12:26.123Z,1478841146.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:26.511Z,1478841146.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:26.914Z,1478841146.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:27.318Z,1478841147.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:27.713Z,1478841147.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:28.117Z,1478841148.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:28.493Z,1478841148.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:28.894Z,1478841148.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:29.290Z,1478841149.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:29.693Z,1478841149.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:30.097Z,1478841150.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:30.504Z,1478841150.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:30.909Z,1478841150.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:31.304Z,1478841151.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:31.696Z,1478841151.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:32.101Z,1478841152.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:32.512Z,1478841152.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:32.916Z,1478841152.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:33.329Z,1478841153.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:33.718Z,1478841153.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:34.122Z,1478841154.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:34.497Z,1478841154.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:34.957Z,1478841154.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:35.305Z,1478841155.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:35.730Z,1478841155.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:36.109Z,1478841156.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:36.533Z,1478841156.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:36.908Z,1478841156.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:37.341Z,1478841157.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:37.701Z,1478841157.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:38.105Z,1478841158.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:38.499Z,1478841158.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:38.901Z,1478841158.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:39.317Z,1478841159.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:39.711Z,1478841159.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:40.108Z,1478841160.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:40.508Z,1478841160.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:40.898Z,1478841160.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:41.310Z,1478841161.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:41.708Z,1478841161.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:42.117Z,1478841162.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:42.512Z,1478841162.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:42.911Z,1478841162.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:43.306Z,1478841163.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:43.697Z,1478841163.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:44.113Z,1478841164.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:44.508Z,1478841164.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:44.902Z,1478841164.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:45.311Z,1478841165.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:45.714Z,1478841165.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:46.117Z,1478841166.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:46.508Z,1478841166.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:46.908Z,1478841166.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:47.299Z,1478841167.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:47.708Z,1478841167.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:48.111Z,1478841168.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:48.517Z,1478841168.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:48.973Z,1478841168.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:49.306Z,1478841169.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:49.712Z,1478841169.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:53.130Z,1478841173.130 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:53.130Z,1478841173.130 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2016-11-11T05:12:53.130Z,1478841173.130 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:12:53.132Z,1478841173.132 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:53.132Z,1478841173.132 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2016-11-11T05:12:53.132Z,1478841173.132 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T05:12:53.134Z,1478841173.134 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:53.134Z,1478841173.134 [DeadReckonWithRespectToWater] Software Fault, FailCount= 9
2016-11-11T05:12:53.134Z,1478841173.134 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T05:12:53.137Z,1478841173.136 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:53.137Z,1478841173.137 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2016-11-11T05:12:53.137Z,1478841173.137 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:12:53.139Z,1478841173.139 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:53.139Z,1478841173.139 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 9
2016-11-11T05:12:53.139Z,1478841173.139 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:12:53.187Z,1478841173.187 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:12:53.188Z,1478841173.188 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T05:12:53.188Z,1478841173.188 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T05:12:53.188Z,1478841173.188 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:12:53.188Z,1478841173.188 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:12:53.301Z,1478841173.301 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:12:53.301Z,1478841173.301 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2016-11-11T05:12:53.302Z,1478841173.302 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T05:12:53.302Z,1478841173.302 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2016-11-11T05:12:53.303Z,1478841173.303 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T05:12:53.303Z,1478841173.303 [DeadReckonWithRespectToWater] No Fault, FailCount= 9
2016-11-11T05:12:53.308Z,1478841173.307 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:12:53.308Z,1478841173.308 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2016-11-11T05:12:53.308Z,1478841173.308 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:12:53.308Z,1478841173.308 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 9
2016-11-11T05:12:53.684Z,1478841173.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:12:53.685Z,1478841173.685 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:12:53.685Z,1478841173.685 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:12:53.686Z,1478841173.686 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T05:12:53.686Z,1478841173.686 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:12:53.687Z,1478841173.687 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:12:53.687Z,1478841173.687 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T05:12:53.688Z,1478841173.688 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:12:53.688Z,1478841173.688 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:12:53.688Z,1478841173.688 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:12:53.689Z,1478841173.689 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:12:53.689Z,1478841173.689 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:12:53.689Z,1478841173.689 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:12:53.690Z,1478841173.690 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:12:53.690Z,1478841173.690 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:12:54.097Z,1478841174.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:54.466Z,1478841174.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:54.850Z,1478841174.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:55.261Z,1478841175.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:55.641Z,1478841175.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:56.070Z,1478841176.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:56.474Z,1478841176.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:56.874Z,1478841176.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:57.249Z,1478841177.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:57.649Z,1478841177.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:58.061Z,1478841178.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:58.463Z,1478841178.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:58.865Z,1478841178.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:59.249Z,1478841179.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:12:59.649Z,1478841179.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:00.071Z,1478841180.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:00.463Z,1478841180.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:00.865Z,1478841180.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:01.258Z,1478841181.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:01.650Z,1478841181.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:02.065Z,1478841182.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:02.473Z,1478841182.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:02.863Z,1478841182.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:03.261Z,1478841183.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:03.651Z,1478841183.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:04.064Z,1478841184.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:04.469Z,1478841184.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:04.863Z,1478841184.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:05.255Z,1478841185.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:05.650Z,1478841185.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:06.121Z,1478841186.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:06.517Z,1478841186.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:06.865Z,1478841186.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:07.265Z,1478841187.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:07.653Z,1478841187.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:08.105Z,1478841188.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:08.505Z,1478841188.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:08.878Z,1478841188.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:09.282Z,1478841189.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:09.675Z,1478841189.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:10.076Z,1478841190.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:10.493Z,1478841190.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:10.899Z,1478841190.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:11.264Z,1478841191.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:11.679Z,1478841191.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:12.071Z,1478841192.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:12.468Z,1478841192.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:12.874Z,1478841192.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:13.285Z,1478841193.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:13.678Z,1478841193.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:14.084Z,1478841194.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:14.476Z,1478841194.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:14.855Z,1478841194.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:15.285Z,1478841195.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:15.669Z,1478841195.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:16.079Z,1478841196.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:16.471Z,1478841196.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:16.878Z,1478841196.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:17.246Z,1478841197.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:17.681Z,1478841197.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:18.064Z,1478841198.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:18.453Z,1478841198.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:18.877Z,1478841198.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:19.270Z,1478841199.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:19.679Z,1478841199.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:20.094Z,1478841200.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:20.494Z,1478841200.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:20.885Z,1478841200.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:21.268Z,1478841201.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:21.681Z,1478841201.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:22.074Z,1478841202.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:22.512Z,1478841202.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:22.916Z,1478841202.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:23.276Z,1478841203.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:23.671Z,1478841203.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:24.055Z,1478841204.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:24.495Z,1478841204.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:24.865Z,1478841204.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:25.287Z,1478841205.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:25.683Z,1478841205.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:26.063Z,1478841206.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:26.449Z,1478841206.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:26.850Z,1478841206.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:27.261Z,1478841207.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:27.650Z,1478841207.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:28.063Z,1478841208.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:28.466Z,1478841208.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:28.869Z,1478841208.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:29.256Z,1478841209.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:29.656Z,1478841209.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:30.064Z,1478841210.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:30.460Z,1478841210.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:30.855Z,1478841210.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:31.265Z,1478841211.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:31.667Z,1478841211.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:32.072Z,1478841212.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:32.446Z,1478841212.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:32.841Z,1478841212.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:33.251Z,1478841213.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:33.649Z,1478841213.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:34.056Z,1478841214.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:34.484Z,1478841214.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:34.901Z,1478841214.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:35.274Z,1478841215.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:35.649Z,1478841215.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:36.082Z,1478841216.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:36.450Z,1478841216.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:36.881Z,1478841216.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:37.305Z,1478841217.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:37.663Z,1478841217.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:38.071Z,1478841218.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:38.461Z,1478841218.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:38.849Z,1478841218.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:39.257Z,1478841219.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:39.649Z,1478841219.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:40.055Z,1478841220.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:40.483Z,1478841220.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:40.865Z,1478841220.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:41.250Z,1478841221.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:41.653Z,1478841221.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:42.049Z,1478841222.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:42.461Z,1478841222.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:42.858Z,1478841222.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:43.269Z,1478841223.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:43.368Z,1478841223.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:43.662Z,1478841223.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:44.065Z,1478841224.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:44.166Z,1478841224.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:44.461Z,1478841224.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:44.584Z,1478841224.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:44.853Z,1478841224.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:45.260Z,1478841225.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:45.380Z,1478841225.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:45.661Z,1478841225.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:46.062Z,1478841226.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:46.176Z,1478841226.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:46.476Z,1478841226.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:46.580Z,1478841226.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:46.873Z,1478841226.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:47.265Z,1478841227.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:47.376Z,1478841227.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:47.665Z,1478841227.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:48.053Z,1478841228.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:48.172Z,1478841228.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:48.453Z,1478841228.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:48.576Z,1478841228.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:48.850Z,1478841228.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:49.324Z,1478841229.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:49.372Z,1478841229.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:49.673Z,1478841229.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:50.105Z,1478841230.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:50.168Z,1478841230.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:50.572Z,1478841230.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:51.368Z,1478841231.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:52.164Z,1478841232.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:52.568Z,1478841232.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:53.364Z,1478841233.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:53.413Z,1478841233.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:53.561Z,1478841233.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:53.937Z,1478841233.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:54.160Z,1478841234.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:54.317Z,1478841234.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:54.564Z,1478841234.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:54.688Z,1478841234.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:55.087Z,1478841235.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:55.360Z,1478841235.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:55.485Z,1478841235.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:55.895Z,1478841235.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:56.157Z,1478841236.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:56.326Z,1478841236.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:56.564Z,1478841236.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:56.696Z,1478841236.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:57.095Z,1478841237.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:57.360Z,1478841237.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:57.473Z,1478841237.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:57.877Z,1478841237.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:58.156Z,1478841238.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:58.299Z,1478841238.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:58.560Z,1478841238.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:58.687Z,1478841238.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:59.087Z,1478841239.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:59.356Z,1478841239.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:13:59.511Z,1478841239.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:13:59.891Z,1478841239.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:00.153Z,1478841240.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:00.283Z,1478841240.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:00.560Z,1478841240.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:00.682Z,1478841240.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:01.084Z,1478841241.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:01.356Z,1478841241.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:01.491Z,1478841241.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:01.897Z,1478841241.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:02.152Z,1478841242.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:02.301Z,1478841242.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:02.556Z,1478841242.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:02.697Z,1478841242.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:03.081Z,1478841243.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:03.352Z,1478841243.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:03.482Z,1478841243.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:03.884Z,1478841243.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:04.148Z,1478841244.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:04.311Z,1478841244.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:04.552Z,1478841244.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:04.687Z,1478841244.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:05.081Z,1478841245.081 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T05:14:05.081Z,1478841245.081 [BPC1] Data Fault, FailCount= 1
2016-11-11T05:14:05.081Z,1478841245.081 [BPC1](ERROR): Data Fault
2016-11-11T05:14:05.089Z,1478841245.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:05.129Z,1478841245.129 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:14:05.348Z,1478841245.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:05.484Z,1478841245.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:05.889Z,1478841245.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:06.144Z,1478841246.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:06.285Z,1478841246.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:06.302Z,1478841246.302 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:14:06.302Z,1478841246.302 [BPC1] No Fault, FailCount= 1
2016-11-11T05:14:06.548Z,1478841246.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:06.863Z,1478841246.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:07.115Z,1478841247.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:07.344Z,1478841247.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:07.501Z,1478841247.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:07.893Z,1478841247.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:08.140Z,1478841248.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:08.301Z,1478841248.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:08.544Z,1478841248.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:08.700Z,1478841248.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:09.085Z,1478841249.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:09.340Z,1478841249.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:09.491Z,1478841249.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:09.887Z,1478841249.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:10.136Z,1478841250.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:10.303Z,1478841250.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:10.540Z,1478841250.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:10.700Z,1478841250.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:11.109Z,1478841251.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:11.336Z,1478841251.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:11.489Z,1478841251.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:11.889Z,1478841251.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:12.133Z,1478841252.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:12.306Z,1478841252.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:12.540Z,1478841252.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:12.686Z,1478841252.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:13.095Z,1478841253.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:13.336Z,1478841253.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:13.497Z,1478841253.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:13.897Z,1478841253.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:14.132Z,1478841254.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:14.282Z,1478841254.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:14.536Z,1478841254.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:14.692Z,1478841254.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:15.086Z,1478841255.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:15.332Z,1478841255.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:15.489Z,1478841255.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:15.885Z,1478841255.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:16.128Z,1478841256.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:16.295Z,1478841256.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:16.532Z,1478841256.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:16.694Z,1478841256.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:17.101Z,1478841257.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:17.486Z,1478841257.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:17.889Z,1478841257.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:18.292Z,1478841258.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:18.686Z,1478841258.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:19.129Z,1478841259.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:19.542Z,1478841259.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:19.897Z,1478841259.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:20.300Z,1478841260.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:20.710Z,1478841260.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:21.086Z,1478841261.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:21.517Z,1478841261.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:21.917Z,1478841261.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:22.118Z,1478841262.118 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T05:14:22.118Z,1478841262.118 [Rowe_600LCM] Communications Fault, FailCount= 2
2016-11-11T05:14:22.118Z,1478841262.118 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T05:14:22.317Z,1478841262.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T05:14:22.318Z,1478841262.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:22.347Z,1478841262.348 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T05:14:22.523Z,1478841262.523 [Rowe_600LCM](INFO): Powering down
2016-11-11T05:14:22.691Z,1478841262.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T05:14:22.692Z,1478841262.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:23.084Z,1478841263.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T05:14:23.085Z,1478841263.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:23.331Z,1478841263.331 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2016-11-11T05:14:23.331Z,1478841263.332 [Rowe_600LCM] Hardware Fault, FailCount= 2
2016-11-11T05:14:23.332Z,1478841263.332 [Rowe_600LCM](ERROR): Hardware Fault
2016-11-11T05:14:23.483Z,1478841263.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T05:14:23.484Z,1478841263.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:23.890Z,1478841263.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T05:14:23.891Z,1478841263.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:23.916Z,1478841263.916 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T05:14:23.916Z,1478841263.916 [Rowe_600LCM] No Fault, FailCount= 2
2016-11-11T05:14:24.139Z,1478841264.139 [Rowe_600LCM](INFO): Initializing
2016-11-11T05:14:24.140Z,1478841264.140 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T05:14:24.140Z,1478841264.140 [Rowe_600LCM](INFO): LCM OK
2016-11-11T05:14:24.140Z,1478841264.140 [Rowe_600LCM](INFO): Powering up
2016-11-11T05:14:24.293Z,1478841264.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T05:14:24.294Z,1478841264.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:24.695Z,1478841264.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T05:14:24.696Z,1478841264.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:25.093Z,1478841265.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T05:14:25.094Z,1478841265.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:25.484Z,1478841265.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T05:14:25.485Z,1478841265.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:25.885Z,1478841265.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T05:14:25.886Z,1478841265.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:26.282Z,1478841266.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T05:14:26.284Z,1478841266.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:26.730Z,1478841266.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T05:14:26.731Z,1478841266.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:27.100Z,1478841267.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T05:14:27.101Z,1478841267.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:27.496Z,1478841267.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T05:14:27.497Z,1478841267.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:27.894Z,1478841267.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T05:14:27.895Z,1478841267.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:28.296Z,1478841268.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T05:14:28.298Z,1478841268.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:28.370Z,1478841268.370 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T05:14:28.460Z,1478841268.460 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T05:14:28.461Z,1478841268.461 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T05:14:28.463Z,1478841268.463 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T05:14:28.464Z,1478841268.464 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T05:14:28.708Z,1478841268.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T05:14:28.710Z,1478841268.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:29.095Z,1478841269.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:29.495Z,1478841269.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:29.874Z,1478841269.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:30.303Z,1478841270.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:30.707Z,1478841270.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:31.097Z,1478841271.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:31.505Z,1478841271.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:31.882Z,1478841271.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:32.282Z,1478841272.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:32.731Z,1478841272.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:33.105Z,1478841273.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:33.501Z,1478841273.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:33.965Z,1478841273.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:34.279Z,1478841274.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:34.723Z,1478841274.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:35.116Z,1478841275.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:35.486Z,1478841275.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:35.921Z,1478841275.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:36.324Z,1478841276.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:36.747Z,1478841276.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:37.090Z,1478841277.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:37.477Z,1478841277.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:37.905Z,1478841277.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:38.297Z,1478841278.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:38.740Z,1478841278.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:39.082Z,1478841279.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:39.485Z,1478841279.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:39.887Z,1478841279.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:40.287Z,1478841280.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:40.738Z,1478841280.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:41.092Z,1478841281.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:41.491Z,1478841281.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:41.897Z,1478841281.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:42.293Z,1478841282.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:42.694Z,1478841282.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:43.094Z,1478841283.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:43.491Z,1478841283.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:43.899Z,1478841283.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:44.032Z,1478841284.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:44.295Z,1478841284.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:44.703Z,1478841284.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:44.828Z,1478841284.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:14:45.125Z,1478841285.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:45.493Z,1478841285.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:45.897Z,1478841285.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:46.298Z,1478841286.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:46.701Z,1478841286.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:47.122Z,1478841287.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:47.486Z,1478841287.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:47.901Z,1478841287.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:48.314Z,1478841288.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:48.772Z,1478841288.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:49.100Z,1478841289.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:49.513Z,1478841289.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:49.897Z,1478841289.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:50.306Z,1478841290.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:53.834Z,1478841293.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:53.978Z,1478841293.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:54.333Z,1478841294.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:54.769Z,1478841294.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:55.132Z,1478841295.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:55.528Z,1478841295.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:55.921Z,1478841295.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:56.319Z,1478841296.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:56.772Z,1478841296.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:57.141Z,1478841297.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:57.534Z,1478841297.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:57.933Z,1478841297.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:58.324Z,1478841298.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:58.722Z,1478841298.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:59.131Z,1478841299.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:59.529Z,1478841299.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:14:59.933Z,1478841299.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:00.345Z,1478841300.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:00.735Z,1478841300.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:01.145Z,1478841301.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:01.522Z,1478841301.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:01.930Z,1478841301.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:02.333Z,1478841302.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:02.744Z,1478841302.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:03.148Z,1478841303.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:03.536Z,1478841303.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:03.948Z,1478841303.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:04.329Z,1478841304.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:04.752Z,1478841304.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:05.138Z,1478841305.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:05.540Z,1478841305.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:05.997Z,1478841305.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:06.343Z,1478841306.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:06.797Z,1478841306.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:07.121Z,1478841307.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:07.547Z,1478841307.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:07.953Z,1478841307.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:08.321Z,1478841308.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:08.726Z,1478841308.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:09.127Z,1478841309.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:09.529Z,1478841309.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:09.932Z,1478841309.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:10.325Z,1478841310.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:10.767Z,1478841310.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:11.122Z,1478841311.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:11.521Z,1478841311.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:11.947Z,1478841311.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:12.337Z,1478841312.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:12.741Z,1478841312.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:13.123Z,1478841313.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:13.528Z,1478841313.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:13.933Z,1478841313.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:14.326Z,1478841314.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:14.728Z,1478841314.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:15.136Z,1478841315.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:15.545Z,1478841315.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:15.936Z,1478841315.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:16.337Z,1478841316.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:16.714Z,1478841316.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:17.133Z,1478841317.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:17.517Z,1478841317.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:17.948Z,1478841317.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:18.351Z,1478841318.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:18.752Z,1478841318.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:19.121Z,1478841319.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:19.525Z,1478841319.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:19.982Z,1478841319.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:20.332Z,1478841320.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:20.719Z,1478841320.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:21.178Z,1478841321.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:21.534Z,1478841321.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:21.969Z,1478841321.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:22.362Z,1478841322.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:22.725Z,1478841322.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:23.133Z,1478841323.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:23.525Z,1478841323.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:23.937Z,1478841323.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:24.333Z,1478841324.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:24.751Z,1478841324.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:25.128Z,1478841325.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:25.527Z,1478841325.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:25.932Z,1478841325.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:26.326Z,1478841326.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:26.731Z,1478841326.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:27.144Z,1478841327.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:27.535Z,1478841327.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:27.937Z,1478841327.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:28.333Z,1478841328.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:28.721Z,1478841328.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:29.114Z,1478841329.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:29.513Z,1478841329.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:29.948Z,1478841329.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:30.344Z,1478841330.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:30.743Z,1478841330.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:31.125Z,1478841331.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:31.521Z,1478841331.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:31.921Z,1478841331.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:32.325Z,1478841332.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:32.725Z,1478841332.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:33.155Z,1478841333.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:33.528Z,1478841333.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:33.927Z,1478841333.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:34.393Z,1478841334.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:34.713Z,1478841334.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:35.134Z,1478841335.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:35.545Z,1478841335.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:35.947Z,1478841335.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:36.358Z,1478841336.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:36.793Z,1478841336.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:37.117Z,1478841337.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:37.525Z,1478841337.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:37.924Z,1478841337.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:38.329Z,1478841338.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:38.724Z,1478841338.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:39.132Z,1478841339.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:39.533Z,1478841339.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:39.937Z,1478841339.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:40.324Z,1478841340.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:40.722Z,1478841340.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:41.129Z,1478841341.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:41.526Z,1478841341.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:41.941Z,1478841341.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:42.332Z,1478841342.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:42.735Z,1478841342.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:43.122Z,1478841343.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:43.528Z,1478841343.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:43.926Z,1478841343.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:44.322Z,1478841344.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:44.733Z,1478841344.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:45.149Z,1478841345.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:45.545Z,1478841345.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:45.933Z,1478841345.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:45.950Z,1478841345.950 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T05:15:46.328Z,1478841346.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:46.727Z,1478841346.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:47.131Z,1478841347.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:47.537Z,1478841347.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:47.935Z,1478841347.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:48.337Z,1478841348.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:48.793Z,1478841348.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:49.165Z,1478841349.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:49.534Z,1478841349.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:49.957Z,1478841349.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:50.318Z,1478841350.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:53.697Z,1478841353.697 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:53.697Z,1478841353.697 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2016-11-11T05:15:53.697Z,1478841353.697 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:15:53.700Z,1478841353.700 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:53.700Z,1478841353.700 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2016-11-11T05:15:53.700Z,1478841353.700 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T05:15:53.702Z,1478841353.702 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:53.702Z,1478841353.702 [DeadReckonWithRespectToWater] Software Fault, FailCount= 10
2016-11-11T05:15:53.702Z,1478841353.702 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T05:15:53.704Z,1478841353.704 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:53.705Z,1478841353.704 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2016-11-11T05:15:53.705Z,1478841353.705 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:15:53.706Z,1478841353.707 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:53.707Z,1478841353.707 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 10
2016-11-11T05:15:53.707Z,1478841353.707 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:15:53.720Z,1478841353.720 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:15:53.720Z,1478841353.720 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T05:15:53.721Z,1478841353.721 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T05:15:53.721Z,1478841353.721 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:15:53.721Z,1478841353.721 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:15:53.872Z,1478841353.872 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:15:53.872Z,1478841353.872 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2016-11-11T05:15:53.873Z,1478841353.873 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T05:15:53.873Z,1478841353.873 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2016-11-11T05:15:53.873Z,1478841353.873 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T05:15:53.873Z,1478841353.873 [DeadReckonWithRespectToWater] No Fault, FailCount= 10
2016-11-11T05:15:53.874Z,1478841353.874 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:15:53.874Z,1478841353.874 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2016-11-11T05:15:53.875Z,1478841353.875 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:15:53.875Z,1478841353.875 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 10
2016-11-11T05:15:54.255Z,1478841354.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:15:54.255Z,1478841354.255 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:15:54.256Z,1478841354.256 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:15:54.256Z,1478841354.256 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T05:15:54.257Z,1478841354.257 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:15:54.257Z,1478841354.257 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:15:54.257Z,1478841354.257 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T05:15:54.258Z,1478841354.258 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:15:54.258Z,1478841354.258 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:15:54.259Z,1478841354.259 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:15:54.259Z,1478841354.259 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:15:54.259Z,1478841354.259 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:15:54.260Z,1478841354.260 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:15:54.260Z,1478841354.260 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:15:54.261Z,1478841354.260 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:15:54.615Z,1478841354.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:55.016Z,1478841355.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:55.384Z,1478841355.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:55.785Z,1478841355.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:56.186Z,1478841356.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:56.589Z,1478841356.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:57.029Z,1478841357.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:57.397Z,1478841357.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:57.796Z,1478841357.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:58.193Z,1478841358.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:58.626Z,1478841358.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:58.993Z,1478841358.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:59.401Z,1478841359.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:15:59.801Z,1478841359.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:00.209Z,1478841360.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:00.624Z,1478841360.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:00.981Z,1478841360.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:01.377Z,1478841361.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:01.781Z,1478841361.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:02.185Z,1478841362.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:02.630Z,1478841362.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:02.994Z,1478841362.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:03.393Z,1478841363.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:03.801Z,1478841363.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:04.190Z,1478841364.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:04.622Z,1478841364.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:05.001Z,1478841365.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:05.402Z,1478841365.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:05.801Z,1478841365.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:06.209Z,1478841366.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:06.697Z,1478841366.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:06.992Z,1478841366.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:07.426Z,1478841367.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:07.789Z,1478841367.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:08.225Z,1478841368.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:08.625Z,1478841368.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:09.001Z,1478841369.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:09.402Z,1478841369.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:09.801Z,1478841369.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:10.197Z,1478841370.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:10.586Z,1478841370.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:10.987Z,1478841370.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:11.457Z,1478841371.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:11.816Z,1478841371.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:12.204Z,1478841372.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:12.623Z,1478841372.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:12.998Z,1478841372.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:13.388Z,1478841373.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:13.786Z,1478841373.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:14.191Z,1478841374.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:14.624Z,1478841374.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:15.012Z,1478841375.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:15.408Z,1478841375.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:15.800Z,1478841375.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:16.206Z,1478841376.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:16.613Z,1478841376.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:17.008Z,1478841377.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:17.399Z,1478841377.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:17.802Z,1478841377.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:18.212Z,1478841378.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:18.612Z,1478841378.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:18.997Z,1478841378.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:19.398Z,1478841379.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:19.804Z,1478841379.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:20.209Z,1478841380.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:20.677Z,1478841380.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:21.008Z,1478841381.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:21.416Z,1478841381.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:21.829Z,1478841381.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:22.189Z,1478841382.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:22.614Z,1478841382.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:23.029Z,1478841383.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:23.393Z,1478841383.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:23.793Z,1478841383.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:24.194Z,1478841384.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:24.543Z,1478841384.543 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T05:16:24.543Z,1478841384.543 [Rowe_600LCM] Communications Fault, FailCount= 3
2016-11-11T05:16:24.543Z,1478841384.543 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T05:16:24.605Z,1478841384.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T05:16:24.606Z,1478841384.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:24.634Z,1478841384.634 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T05:16:24.947Z,1478841384.947 [Rowe_600LCM](INFO): Powering down
2016-11-11T05:16:24.994Z,1478841384.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T05:16:24.995Z,1478841384.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:25.400Z,1478841385.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T05:16:25.401Z,1478841385.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:25.792Z,1478841385.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T05:16:25.793Z,1478841385.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:26.191Z,1478841386.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T05:16:26.196Z,1478841386.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:26.225Z,1478841386.224 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T05:16:26.225Z,1478841386.225 [Rowe_600LCM] No Fault, FailCount= 3
2016-11-11T05:16:26.564Z,1478841386.564 [Rowe_600LCM](INFO): Initializing
2016-11-11T05:16:26.564Z,1478841386.565 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T05:16:26.565Z,1478841386.565 [Rowe_600LCM](INFO): LCM OK
2016-11-11T05:16:26.565Z,1478841386.565 [Rowe_600LCM](INFO): Powering up
2016-11-11T05:16:26.598Z,1478841386.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T05:16:26.604Z,1478841386.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:27.002Z,1478841387.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T05:16:27.003Z,1478841387.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:27.409Z,1478841387.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T05:16:27.410Z,1478841387.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:27.808Z,1478841387.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T05:16:27.809Z,1478841387.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:28.200Z,1478841388.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T05:16:28.201Z,1478841388.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:28.577Z,1478841388.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T05:16:28.578Z,1478841388.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:28.978Z,1478841388.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T05:16:28.979Z,1478841388.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:29.384Z,1478841389.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T05:16:29.386Z,1478841389.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:29.787Z,1478841389.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T05:16:29.788Z,1478841389.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:30.216Z,1478841390.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T05:16:30.217Z,1478841390.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:30.591Z,1478841390.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T05:16:30.592Z,1478841390.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:30.752Z,1478841390.752 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T05:16:30.822Z,1478841390.822 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T05:16:30.823Z,1478841390.823 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T05:16:30.824Z,1478841390.824 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T05:16:30.825Z,1478841390.825 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T05:16:30.996Z,1478841390.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T05:16:30.997Z,1478841390.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:31.391Z,1478841391.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:31.794Z,1478841391.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:32.187Z,1478841392.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:32.594Z,1478841392.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:33.009Z,1478841393.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:33.400Z,1478841393.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:33.806Z,1478841393.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:34.197Z,1478841394.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:34.596Z,1478841394.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:35.025Z,1478841395.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:35.429Z,1478841395.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:35.825Z,1478841395.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:36.237Z,1478841396.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:36.592Z,1478841396.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:37.014Z,1478841397.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:37.413Z,1478841397.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:37.863Z,1478841397.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:38.189Z,1478841398.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:38.590Z,1478841398.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:38.991Z,1478841398.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:39.392Z,1478841399.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:39.791Z,1478841399.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:40.194Z,1478841400.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:40.592Z,1478841400.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:40.993Z,1478841400.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:41.395Z,1478841401.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:41.745Z,1478841401.745 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T05:16:41.745Z,1478841401.745 [NAL9602] Data Fault, FailCount= 3
2016-11-11T05:16:41.745Z,1478841401.745 [NAL9602](ERROR): Data Fault
2016-11-11T05:16:41.801Z,1478841401.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:41.834Z,1478841401.834 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T05:16:42.149Z,1478841402.149 [NAL9602](INFO): Powering down
2016-11-11T05:16:42.196Z,1478841402.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:42.595Z,1478841402.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:42.989Z,1478841402.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:43.029Z,1478841403.029 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T05:16:43.029Z,1478841403.029 [NAL9602] No Fault, FailCount= 3
2016-11-11T05:16:43.397Z,1478841403.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:43.776Z,1478841403.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:44.177Z,1478841404.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:44.609Z,1478841404.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:44.985Z,1478841404.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:45.384Z,1478841405.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:45.793Z,1478841405.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:46.182Z,1478841406.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:46.590Z,1478841406.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:46.989Z,1478841406.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:47.345Z,1478841407.345 [NAL9602](INFO): Powering up NAL9602
2016-11-11T05:16:47.399Z,1478841407.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:47.785Z,1478841407.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:48.192Z,1478841408.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:48.594Z,1478841408.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:48.599Z,1478841408.599 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T05:11:48.2Z
2016-11-11T05:16:48.600Z,1478841408.599 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T05:16:48.600Z,1478841408.600 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T05:16:48.984Z,1478841408.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:49.928Z,1478841409.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:50.042Z,1478841410.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:51.780Z,1478841411.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:16:52.576Z,1478841412.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:16:53.457Z,1478841413.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:53.514Z,1478841413.514 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0012.lzma
2016-11-11T05:16:53.570Z,1478841413.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:53.997Z,1478841413.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:54.313Z,1478841414.313 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0012.lzma.bak
2016-11-11T05:16:54.313Z,1478841414.313 [DataOverHttps](INFO): SBD MOMSN=4555036
2016-11-11T05:16:54.437Z,1478841414.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:55.995Z,1478841415.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:56.138Z,1478841416.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:59.460Z,1478841419.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:59.595Z,1478841419.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:16:59.921Z,1478841419.921 [NAL9602](INFO): NAL9602 initialized
2016-11-11T05:16:59.966Z,1478841419.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:00.378Z,1478841420.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:00.791Z,1478841420.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:01.189Z,1478841421.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:04.585Z,1478841424.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:04.640Z,1478841424.640 [DataOverHttps](INFO): Sending 244 bytes from file Logs/20161111T044527/Express0013.lzma
2016-11-11T05:17:04.721Z,1478841424.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:05.080Z,1478841425.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:05.413Z,1478841425.413 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0013.lzma.bak
2016-11-11T05:17:05.413Z,1478841425.413 [DataOverHttps](INFO): SBD MOMSN=4555038
2016-11-11T05:17:05.476Z,1478841425.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:06.929Z,1478841426.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:06.935Z,1478841426.935 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T05:17:06.935Z,1478841426.935 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T05:17:06.935Z,1478841426.935 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T05:17:07.073Z,1478841427.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:10.382Z,1478841430.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:10.537Z,1478841430.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:10.893Z,1478841430.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:11.282Z,1478841431.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:11.664Z,1478841431.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:12.063Z,1478841432.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:12.493Z,1478841432.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:12.877Z,1478841432.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:13.270Z,1478841433.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:13.670Z,1478841433.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:14.049Z,1478841434.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:14.531Z,1478841434.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:14.850Z,1478841434.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:15.265Z,1478841435.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:15.654Z,1478841435.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:16.060Z,1478841436.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:16.481Z,1478841436.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:16.866Z,1478841436.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:17.257Z,1478841437.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:17.660Z,1478841437.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:18.059Z,1478841438.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:18.501Z,1478841438.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:18.873Z,1478841438.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:19.281Z,1478841439.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:19.676Z,1478841439.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:20.050Z,1478841440.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:20.454Z,1478841440.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:20.885Z,1478841440.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:21.255Z,1478841441.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:21.657Z,1478841441.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:22.088Z,1478841442.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:22.469Z,1478841442.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:22.869Z,1478841442.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:23.301Z,1478841443.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:23.701Z,1478841443.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:24.061Z,1478841444.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:24.510Z,1478841444.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:24.889Z,1478841444.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:25.293Z,1478841445.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:25.697Z,1478841445.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:26.045Z,1478841446.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:26.523Z,1478841446.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:26.853Z,1478841446.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:27.257Z,1478841447.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:27.648Z,1478841447.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:28.056Z,1478841448.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:28.461Z,1478841448.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:28.863Z,1478841448.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:29.245Z,1478841449.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:29.650Z,1478841449.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:30.049Z,1478841450.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:30.452Z,1478841450.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:30.897Z,1478841450.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:31.269Z,1478841451.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:31.663Z,1478841451.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:32.046Z,1478841452.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:32.460Z,1478841452.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:32.853Z,1478841452.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:33.246Z,1478841453.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:33.647Z,1478841453.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:34.063Z,1478841454.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:34.481Z,1478841454.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:34.863Z,1478841454.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:35.257Z,1478841455.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:35.646Z,1478841455.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:36.046Z,1478841456.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:36.449Z,1478841456.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:36.864Z,1478841456.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:37.264Z,1478841457.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:37.702Z,1478841457.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:38.049Z,1478841458.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:38.452Z,1478841458.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:38.877Z,1478841458.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:39.250Z,1478841459.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:39.694Z,1478841459.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:40.064Z,1478841460.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:40.493Z,1478841460.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:40.865Z,1478841460.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:41.249Z,1478841461.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:41.645Z,1478841461.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:42.050Z,1478841462.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:42.453Z,1478841462.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:42.863Z,1478841462.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:43.327Z,1478841463.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:43.663Z,1478841463.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:44.045Z,1478841464.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:44.446Z,1478841464.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:44.843Z,1478841464.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:45.246Z,1478841465.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:45.648Z,1478841465.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:46.077Z,1478841466.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:46.488Z,1478841466.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:46.904Z,1478841466.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:47.261Z,1478841467.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:47.661Z,1478841467.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:48.050Z,1478841468.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:48.465Z,1478841468.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:48.869Z,1478841468.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:49.269Z,1478841469.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:49.673Z,1478841469.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:50.046Z,1478841470.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:50.465Z,1478841470.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:50.871Z,1478841470.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:51.255Z,1478841471.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:51.654Z,1478841471.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:52.093Z,1478841472.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:52.501Z,1478841472.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:52.866Z,1478841472.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:53.293Z,1478841473.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:53.658Z,1478841473.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:54.094Z,1478841474.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:54.492Z,1478841474.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:54.873Z,1478841474.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:55.273Z,1478841475.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:55.666Z,1478841475.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:56.058Z,1478841476.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:56.457Z,1478841476.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:56.865Z,1478841476.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:57.257Z,1478841477.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:57.680Z,1478841477.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:58.067Z,1478841478.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:58.467Z,1478841478.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:58.869Z,1478841478.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:59.268Z,1478841479.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:17:59.661Z,1478841479.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:00.045Z,1478841480.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:00.474Z,1478841480.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:00.870Z,1478841480.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:01.281Z,1478841481.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:01.679Z,1478841481.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:02.050Z,1478841482.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:02.446Z,1478841482.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:02.856Z,1478841482.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:03.253Z,1478841483.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:03.665Z,1478841483.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:04.065Z,1478841484.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:04.461Z,1478841484.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:04.859Z,1478841484.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:05.265Z,1478841485.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:05.655Z,1478841485.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:06.058Z,1478841486.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:06.517Z,1478841486.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:06.875Z,1478841486.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:07.278Z,1478841487.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:10.709Z,1478841490.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:10.854Z,1478841490.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:11.217Z,1478841491.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:11.605Z,1478841491.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:12.010Z,1478841492.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:12.455Z,1478841492.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:12.826Z,1478841492.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:13.211Z,1478841493.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:13.610Z,1478841493.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:13.981Z,1478841493.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:14.472Z,1478841494.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:14.790Z,1478841494.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:15.209Z,1478841495.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:15.587Z,1478841495.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:16.006Z,1478841496.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:16.426Z,1478841496.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:16.835Z,1478841496.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:17.193Z,1478841497.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:17.612Z,1478841497.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:18.015Z,1478841498.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:18.417Z,1478841498.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:18.827Z,1478841498.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:19.220Z,1478841499.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:19.613Z,1478841499.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:19.980Z,1478841499.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:20.400Z,1478841500.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:20.803Z,1478841500.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:21.177Z,1478841501.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:21.588Z,1478841501.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:22.009Z,1478841502.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:22.443Z,1478841502.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:22.804Z,1478841502.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:23.185Z,1478841503.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:23.649Z,1478841503.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:24.018Z,1478841504.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:24.441Z,1478841504.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:24.813Z,1478841504.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:25.210Z,1478841505.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:25.633Z,1478841505.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:25.996Z,1478841505.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:26.406Z,1478841506.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:26.780Z,1478841506.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:27.164Z,1478841507.164 [BPC1](ERROR): Failed to receive battery data
2016-11-11T05:18:27.164Z,1478841507.164 [BPC1] Communications Fault, FailCount= 1
2016-11-11T05:18:27.164Z,1478841507.164 [BPC1](ERROR): Communications Fault
2016-11-11T05:18:27.173Z,1478841507.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:27.202Z,1478841507.202 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T05:18:27.215Z,1478841507.215 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T05:18:27.215Z,1478841507.215 [Rowe_600LCM] Communications Fault, FailCount= 4
2016-11-11T05:18:27.215Z,1478841507.215 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T05:18:27.571Z,1478841507.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T05:18:27.581Z,1478841507.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:27.619Z,1478841507.619 [Rowe_600LCM](INFO): Powering down
2016-11-11T05:18:27.628Z,1478841507.628 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T05:18:27.993Z,1478841507.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T05:18:27.994Z,1478841507.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:28.388Z,1478841508.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T05:18:28.389Z,1478841508.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:28.406Z,1478841508.406 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:18:28.406Z,1478841508.406 [BPC1] No Fault, FailCount= 1
2016-11-11T05:18:28.837Z,1478841508.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2016-11-11T05:18:28.838Z,1478841508.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:28.855Z,1478841508.855 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T05:18:28.855Z,1478841508.855 [Rowe_600LCM] No Fault, FailCount= 4
2016-11-11T05:18:29.169Z,1478841509.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T05:18:29.170Z,1478841509.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:29.235Z,1478841509.235 [Rowe_600LCM](INFO): Initializing
2016-11-11T05:18:29.236Z,1478841509.236 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T05:18:29.236Z,1478841509.236 [Rowe_600LCM](INFO): LCM OK
2016-11-11T05:18:29.236Z,1478841509.236 [Rowe_600LCM](INFO): Powering up
2016-11-11T05:18:29.598Z,1478841509.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T05:18:29.599Z,1478841509.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:29.974Z,1478841509.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T05:18:29.975Z,1478841509.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:30.373Z,1478841510.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T05:18:30.374Z,1478841510.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:30.795Z,1478841510.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T05:18:30.796Z,1478841510.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:31.193Z,1478841511.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T05:18:31.194Z,1478841511.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:31.589Z,1478841511.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T05:18:31.590Z,1478841511.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:31.972Z,1478841511.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T05:18:31.973Z,1478841511.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:32.373Z,1478841512.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T05:18:32.374Z,1478841512.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:32.770Z,1478841512.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T05:18:32.771Z,1478841512.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:33.172Z,1478841513.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T05:18:33.173Z,1478841513.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:33.355Z,1478841513.355 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T05:18:33.435Z,1478841513.435 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T05:18:33.436Z,1478841513.436 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T05:18:33.438Z,1478841513.438 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T05:18:33.439Z,1478841513.439 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T05:18:33.594Z,1478841513.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T05:18:33.595Z,1478841513.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:33.985Z,1478841513.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:34.403Z,1478841514.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:34.775Z,1478841514.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:35.201Z,1478841515.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:35.575Z,1478841515.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:36.005Z,1478841516.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:36.405Z,1478841516.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:36.789Z,1478841516.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:37.193Z,1478841517.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:37.593Z,1478841517.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:37.974Z,1478841517.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:38.374Z,1478841518.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:38.770Z,1478841518.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:39.173Z,1478841519.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:39.584Z,1478841519.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:39.988Z,1478841519.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:40.384Z,1478841520.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:40.767Z,1478841520.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:41.169Z,1478841521.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:41.573Z,1478841521.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:42.096Z,1478841522.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:42.373Z,1478841522.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:42.793Z,1478841522.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:43.184Z,1478841523.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:43.588Z,1478841523.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:43.977Z,1478841523.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:44.374Z,1478841524.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:44.782Z,1478841524.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:45.173Z,1478841525.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:45.584Z,1478841525.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:45.993Z,1478841525.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:46.393Z,1478841526.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:46.774Z,1478841526.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:47.201Z,1478841527.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:47.574Z,1478841527.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:47.974Z,1478841527.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:48.398Z,1478841528.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:48.789Z,1478841528.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:49.218Z,1478841529.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:49.594Z,1478841529.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:49.994Z,1478841529.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:50.405Z,1478841530.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:50.796Z,1478841530.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:51.178Z,1478841531.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:51.627Z,1478841531.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:52.022Z,1478841532.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:52.393Z,1478841532.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:52.791Z,1478841532.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:53.218Z,1478841533.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:53.581Z,1478841533.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:53.975Z,1478841533.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:54.381Z,1478841534.381 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:54.381Z,1478841534.381 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2016-11-11T05:18:54.381Z,1478841534.381 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:18:54.388Z,1478841534.388 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:54.388Z,1478841534.388 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2016-11-11T05:18:54.388Z,1478841534.388 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T05:18:54.390Z,1478841534.390 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:54.390Z,1478841534.390 [DeadReckonWithRespectToWater] Software Fault, FailCount= 11
2016-11-11T05:18:54.390Z,1478841534.390 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T05:18:54.392Z,1478841534.392 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:54.393Z,1478841534.392 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2016-11-11T05:18:54.393Z,1478841534.393 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:18:54.394Z,1478841534.395 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:54.395Z,1478841534.395 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 11
2016-11-11T05:18:54.395Z,1478841534.395 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:18:54.424Z,1478841534.424 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:18:54.425Z,1478841534.425 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T05:18:54.425Z,1478841534.425 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T05:18:54.425Z,1478841534.425 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:18:54.426Z,1478841534.425 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:18:54.813Z,1478841534.813 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:18:54.813Z,1478841534.813 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2016-11-11T05:18:54.813Z,1478841534.813 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T05:18:54.813Z,1478841534.813 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2016-11-11T05:18:54.814Z,1478841534.814 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T05:18:54.814Z,1478841534.814 [DeadReckonWithRespectToWater] No Fault, FailCount= 11
2016-11-11T05:18:54.815Z,1478841534.815 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:18:54.815Z,1478841534.815 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2016-11-11T05:18:54.815Z,1478841534.815 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:18:54.815Z,1478841534.815 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 11
2016-11-11T05:18:55.192Z,1478841535.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:18:55.192Z,1478841535.193 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:18:55.193Z,1478841535.193 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:18:55.193Z,1478841535.193 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T05:18:55.194Z,1478841535.194 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:18:55.194Z,1478841535.194 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:18:55.194Z,1478841535.194 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T05:18:55.195Z,1478841535.195 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:18:55.199Z,1478841535.199 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:18:55.200Z,1478841535.200 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:18:55.200Z,1478841535.200 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:18:55.201Z,1478841535.201 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:18:55.201Z,1478841535.201 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:18:55.201Z,1478841535.201 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:18:55.202Z,1478841535.202 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:18:55.593Z,1478841535.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:55.982Z,1478841535.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:56.374Z,1478841536.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:56.838Z,1478841536.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:57.189Z,1478841537.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:57.598Z,1478841537.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:57.993Z,1478841537.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:58.390Z,1478841538.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:58.778Z,1478841538.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:59.185Z,1478841539.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:59.580Z,1478841539.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:18:59.982Z,1478841539.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:00.378Z,1478841540.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:00.794Z,1478841540.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:01.242Z,1478841541.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:01.597Z,1478841541.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:01.994Z,1478841541.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:02.366Z,1478841542.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:02.790Z,1478841542.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:03.169Z,1478841543.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:03.601Z,1478841543.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:03.984Z,1478841543.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:04.391Z,1478841544.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:04.782Z,1478841544.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:05.178Z,1478841545.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:05.580Z,1478841545.579 [BPC1](ERROR): Failed to receive battery data
2016-11-11T05:19:05.580Z,1478841545.580 [BPC1] Communications Fault, FailCount= 1
2016-11-11T05:19:05.580Z,1478841545.580 [BPC1](ERROR): Communications Fault
2016-11-11T05:19:05.593Z,1478841545.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:05.637Z,1478841545.637 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T05:19:05.979Z,1478841545.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:06.382Z,1478841546.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:06.791Z,1478841546.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:06.831Z,1478841546.831 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:19:06.831Z,1478841546.831 [BPC1] No Fault, FailCount= 1
2016-11-11T05:19:07.288Z,1478841547.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:07.621Z,1478841547.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:10.540Z,1478841550.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:19:11.042Z,1478841551.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:11.181Z,1478841551.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:11.336Z,1478841551.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:19:11.556Z,1478841551.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:11.969Z,1478841551.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:12.356Z,1478841552.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:12.745Z,1478841552.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:13.165Z,1478841553.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:13.553Z,1478841553.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:13.953Z,1478841553.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:14.346Z,1478841554.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:14.756Z,1478841554.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:15.156Z,1478841555.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:15.560Z,1478841555.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:15.946Z,1478841555.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:16.350Z,1478841556.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:16.753Z,1478841556.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:17.150Z,1478841557.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:17.567Z,1478841557.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:17.971Z,1478841557.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:18.382Z,1478841558.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:18.762Z,1478841558.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:19.162Z,1478841559.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:19.537Z,1478841559.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:19.982Z,1478841559.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:20.386Z,1478841560.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:20.752Z,1478841560.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:21.152Z,1478841561.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:21.562Z,1478841561.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:21.949Z,1478841561.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:22.349Z,1478841562.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:22.746Z,1478841562.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:23.152Z,1478841563.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:23.557Z,1478841563.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:23.965Z,1478841563.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:24.354Z,1478841564.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:24.755Z,1478841564.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:25.145Z,1478841565.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:25.598Z,1478841565.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:25.942Z,1478841565.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:26.393Z,1478841566.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:26.762Z,1478841566.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:27.157Z,1478841567.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:27.628Z,1478841567.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:27.946Z,1478841567.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:28.350Z,1478841568.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:28.750Z,1478841568.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:29.154Z,1478841569.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:29.560Z,1478841569.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:29.965Z,1478841569.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:30.352Z,1478841570.352 [BPC1](ERROR): Failed to parse message.
2016-11-11T05:19:30.352Z,1478841570.352 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T05:19:30.352Z,1478841570.352 [BPC1] Data Fault, FailCount= 1
2016-11-11T05:19:30.352Z,1478841570.352 [BPC1](ERROR): Data Fault
2016-11-11T05:19:30.361Z,1478841570.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:30.389Z,1478841570.389 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:19:30.754Z,1478841570.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:31.156Z,1478841571.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:31.537Z,1478841571.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:31.569Z,1478841571.569 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:19:31.570Z,1478841571.569 [BPC1] No Fault, FailCount= 1
2016-11-11T05:19:32.008Z,1478841572.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:32.389Z,1478841572.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:32.772Z,1478841572.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:33.170Z,1478841573.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:33.557Z,1478841573.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:33.949Z,1478841573.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:34.353Z,1478841574.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:34.746Z,1478841574.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:35.153Z,1478841575.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:35.562Z,1478841575.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:35.969Z,1478841575.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:36.365Z,1478841576.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:36.746Z,1478841576.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:37.156Z,1478841577.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:37.550Z,1478841577.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:37.955Z,1478841577.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:38.356Z,1478841578.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:38.759Z,1478841578.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:39.160Z,1478841579.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:39.619Z,1478841579.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:39.941Z,1478841579.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:40.337Z,1478841580.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:40.738Z,1478841580.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:41.145Z,1478841581.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:41.620Z,1478841581.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:41.957Z,1478841581.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:42.351Z,1478841582.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:42.745Z,1478841582.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:43.205Z,1478841583.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:43.573Z,1478841583.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:43.946Z,1478841583.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:44.376Z,1478841584.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:44.771Z,1478841584.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:45.227Z,1478841585.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:45.595Z,1478841585.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:45.947Z,1478841585.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:46.354Z,1478841586.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:46.749Z,1478841586.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:47.200Z,1478841587.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:47.562Z,1478841587.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:47.967Z,1478841587.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:48.372Z,1478841588.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:48.753Z,1478841588.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:49.209Z,1478841589.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:49.545Z,1478841589.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:49.950Z,1478841589.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:50.346Z,1478841590.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:50.752Z,1478841590.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:51.155Z,1478841591.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:51.569Z,1478841591.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:51.961Z,1478841591.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:52.341Z,1478841592.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:52.745Z,1478841592.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:53.141Z,1478841593.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:53.618Z,1478841593.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:53.952Z,1478841593.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:54.352Z,1478841594.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:54.743Z,1478841594.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:55.148Z,1478841595.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:55.600Z,1478841595.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:55.952Z,1478841595.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:56.402Z,1478841596.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:56.762Z,1478841596.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:57.233Z,1478841597.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:57.541Z,1478841597.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:57.973Z,1478841597.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:58.349Z,1478841598.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:58.783Z,1478841598.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:59.194Z,1478841599.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:59.555Z,1478841599.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:19:59.951Z,1478841599.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:00.352Z,1478841600.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:00.757Z,1478841600.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:01.214Z,1478841601.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:01.549Z,1478841601.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:01.953Z,1478841601.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:02.398Z,1478841602.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:02.755Z,1478841602.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:03.222Z,1478841603.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:03.548Z,1478841603.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:03.946Z,1478841603.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:04.353Z,1478841604.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:04.757Z,1478841604.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:05.146Z,1478841605.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:05.568Z,1478841605.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:05.966Z,1478841605.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:06.361Z,1478841606.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:06.757Z,1478841606.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:07.138Z,1478841607.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:07.610Z,1478841607.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:07.949Z,1478841607.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:11.466Z,1478841611.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:11.639Z,1478841611.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:12.013Z,1478841612.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:12.373Z,1478841612.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:12.801Z,1478841612.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:13.228Z,1478841613.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:13.582Z,1478841613.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:13.982Z,1478841613.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:14.382Z,1478841614.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:14.769Z,1478841614.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:15.221Z,1478841615.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:15.574Z,1478841615.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:15.982Z,1478841615.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:16.384Z,1478841616.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:16.788Z,1478841616.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:17.206Z,1478841617.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:17.585Z,1478841617.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:17.962Z,1478841617.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:18.365Z,1478841618.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:18.787Z,1478841618.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:19.260Z,1478841619.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:19.609Z,1478841619.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:19.970Z,1478841619.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:20.374Z,1478841620.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:20.774Z,1478841620.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:21.169Z,1478841621.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:21.584Z,1478841621.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:21.985Z,1478841621.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:22.393Z,1478841622.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:22.770Z,1478841622.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:23.181Z,1478841623.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:23.586Z,1478841623.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:24.037Z,1478841624.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:24.389Z,1478841624.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:24.825Z,1478841624.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:25.206Z,1478841625.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:25.633Z,1478841625.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:26.005Z,1478841626.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:26.361Z,1478841626.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:26.794Z,1478841626.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:27.202Z,1478841627.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:27.589Z,1478841627.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:27.989Z,1478841627.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:28.388Z,1478841628.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:28.762Z,1478841628.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:29.211Z,1478841629.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:29.482Z,1478841629.482 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T05:20:29.482Z,1478841629.482 [Rowe_600LCM] Communications Fault, FailCount= 5
2016-11-11T05:20:29.482Z,1478841629.483 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T05:20:29.575Z,1478841629.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T05:20:29.580Z,1478841629.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:29.613Z,1478841629.613 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T05:20:29.613Z,1478841629.613 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-11-11T05:20:29.887Z,1478841629.887 [Rowe_600LCM](INFO): Powering down
2016-11-11T05:20:29.989Z,1478841629.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T05:20:29.990Z,1478841629.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:30.368Z,1478841630.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T05:20:30.369Z,1478841630.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:30.777Z,1478841630.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T05:20:30.778Z,1478841630.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:31.179Z,1478841631.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T05:20:31.180Z,1478841631.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:31.588Z,1478841631.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T05:20:31.589Z,1478841631.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:31.966Z,1478841631.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T05:20:31.967Z,1478841631.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:32.369Z,1478841632.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T05:20:32.370Z,1478841632.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:32.772Z,1478841632.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T05:20:32.773Z,1478841632.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:33.169Z,1478841633.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T05:20:33.171Z,1478841633.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:33.586Z,1478841633.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T05:20:33.588Z,1478841633.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:33.985Z,1478841633.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T05:20:33.986Z,1478841633.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:34.393Z,1478841634.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T05:20:34.394Z,1478841634.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:34.790Z,1478841634.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T05:20:34.792Z,1478841634.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:35.181Z,1478841635.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T05:20:35.182Z,1478841635.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:35.573Z,1478841635.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T05:20:35.574Z,1478841635.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:35.962Z,1478841635.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T05:20:35.963Z,1478841635.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:36.421Z,1478841636.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T05:20:36.422Z,1478841636.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:36.825Z,1478841636.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T05:20:36.826Z,1478841636.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:37.204Z,1478841637.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T05:20:37.205Z,1478841637.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:37.604Z,1478841637.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T05:20:37.605Z,1478841637.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:37.967Z,1478841637.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T05:20:37.969Z,1478841637.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:38.402Z,1478841638.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T05:20:38.404Z,1478841638.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:38.801Z,1478841638.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T05:20:38.802Z,1478841638.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:39.169Z,1478841639.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T05:20:39.170Z,1478841639.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:39.585Z,1478841639.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T05:20:39.586Z,1478841639.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:39.992Z,1478841639.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T05:20:39.993Z,1478841639.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:40.386Z,1478841640.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T05:20:40.387Z,1478841640.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:40.778Z,1478841640.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T05:20:40.779Z,1478841640.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:41.180Z,1478841641.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T05:20:41.182Z,1478841641.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:41.573Z,1478841641.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T05:20:41.574Z,1478841641.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:41.985Z,1478841641.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T05:20:41.986Z,1478841641.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:42.380Z,1478841642.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T05:20:42.381Z,1478841642.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:42.783Z,1478841642.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T05:20:42.784Z,1478841642.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:43.185Z,1478841643.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T05:20:43.187Z,1478841643.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:43.587Z,1478841643.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T05:20:43.588Z,1478841643.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:43.981Z,1478841643.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T05:20:43.982Z,1478841643.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:44.378Z,1478841644.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T05:20:44.379Z,1478841644.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:44.790Z,1478841644.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T05:20:44.791Z,1478841644.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:45.173Z,1478841645.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T05:20:45.175Z,1478841645.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:45.585Z,1478841645.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T05:20:45.586Z,1478841645.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:45.992Z,1478841645.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T05:20:45.994Z,1478841645.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:46.387Z,1478841646.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T05:20:46.389Z,1478841646.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:46.778Z,1478841646.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T05:20:46.779Z,1478841646.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:47.180Z,1478841647.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T05:20:47.181Z,1478841647.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:47.569Z,1478841647.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T05:20:47.570Z,1478841647.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:47.988Z,1478841647.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T05:20:47.989Z,1478841647.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:48.373Z,1478841648.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T05:20:48.374Z,1478841648.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:48.785Z,1478841648.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T05:20:48.786Z,1478841648.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:49.209Z,1478841649.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2016-11-11T05:20:49.210Z,1478841649.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:49.617Z,1478841649.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:49.980Z,1478841649.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:50.405Z,1478841650.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:50.774Z,1478841650.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:51.205Z,1478841651.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:51.613Z,1478841651.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:52.002Z,1478841652.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:52.385Z,1478841652.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:52.771Z,1478841652.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:53.173Z,1478841653.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:53.582Z,1478841653.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:53.970Z,1478841653.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:54.382Z,1478841654.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:54.797Z,1478841654.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:55.209Z,1478841655.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:55.587Z,1478841655.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:55.974Z,1478841655.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:56.373Z,1478841656.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:56.817Z,1478841656.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:57.180Z,1478841657.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:57.593Z,1478841657.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:57.991Z,1478841657.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:58.413Z,1478841658.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:58.778Z,1478841658.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:59.187Z,1478841659.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:59.577Z,1478841659.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:20:59.990Z,1478841659.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:00.362Z,1478841660.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:00.796Z,1478841660.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:01.194Z,1478841661.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:01.597Z,1478841661.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:01.973Z,1478841661.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:02.410Z,1478841662.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:02.785Z,1478841662.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:03.183Z,1478841663.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:03.625Z,1478841663.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:03.990Z,1478841663.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:04.417Z,1478841664.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:04.779Z,1478841664.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:05.217Z,1478841665.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:05.573Z,1478841665.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:05.974Z,1478841665.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:06.386Z,1478841666.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:06.779Z,1478841666.779 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T05:21:06.809Z,1478841666.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:07.185Z,1478841667.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:07.589Z,1478841667.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:07.979Z,1478841667.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:11.222Z,1478841671.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:11.345Z,1478841671.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:11.713Z,1478841671.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:12.115Z,1478841672.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:12.516Z,1478841672.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:12.893Z,1478841672.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:13.292Z,1478841673.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:13.697Z,1478841673.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:14.100Z,1478841674.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:14.507Z,1478841674.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:14.910Z,1478841674.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:15.306Z,1478841675.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:15.712Z,1478841675.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:16.133Z,1478841676.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:16.506Z,1478841676.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:16.903Z,1478841676.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:17.345Z,1478841677.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:17.721Z,1478841677.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:18.117Z,1478841678.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:18.540Z,1478841678.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:18.904Z,1478841678.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:19.337Z,1478841679.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:19.741Z,1478841679.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:20.117Z,1478841680.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:20.513Z,1478841680.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:20.897Z,1478841680.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:21.309Z,1478841681.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:21.709Z,1478841681.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:22.089Z,1478841682.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:22.500Z,1478841682.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:22.905Z,1478841682.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:23.301Z,1478841683.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:23.693Z,1478841683.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:24.093Z,1478841684.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:24.501Z,1478841684.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:24.901Z,1478841684.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:25.305Z,1478841685.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:25.697Z,1478841685.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:26.104Z,1478841686.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:26.494Z,1478841686.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:26.900Z,1478841686.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:27.303Z,1478841687.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:27.701Z,1478841687.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:28.094Z,1478841688.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:28.507Z,1478841688.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:28.907Z,1478841688.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:29.310Z,1478841689.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:29.694Z,1478841689.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:30.096Z,1478841690.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:30.502Z,1478841690.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:30.900Z,1478841690.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:31.307Z,1478841691.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:31.749Z,1478841691.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:32.116Z,1478841692.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:32.513Z,1478841692.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:32.882Z,1478841692.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:33.313Z,1478841693.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:33.693Z,1478841693.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:34.083Z,1478841694.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:34.519Z,1478841694.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:34.892Z,1478841694.892 [BPC1](ERROR): Failed to receive battery data
2016-11-11T05:21:34.892Z,1478841694.892 [BPC1] Communications Fault, FailCount= 1
2016-11-11T05:21:34.893Z,1478841694.893 [BPC1](ERROR): Communications Fault
2016-11-11T05:21:34.928Z,1478841694.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:34.944Z,1478841694.944 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T05:21:35.317Z,1478841695.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:35.693Z,1478841695.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:36.093Z,1478841696.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:36.145Z,1478841696.145 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:21:36.145Z,1478841696.145 [BPC1] No Fault, FailCount= 1
2016-11-11T05:21:36.559Z,1478841696.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:36.929Z,1478841696.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:37.323Z,1478841697.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:37.720Z,1478841697.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:38.105Z,1478841698.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:38.493Z,1478841698.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:38.893Z,1478841698.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:39.294Z,1478841699.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:39.701Z,1478841699.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:40.093Z,1478841700.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:40.504Z,1478841700.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:40.909Z,1478841700.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:41.304Z,1478841701.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:41.700Z,1478841701.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:42.104Z,1478841702.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:42.503Z,1478841702.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:42.901Z,1478841702.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:43.310Z,1478841703.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:43.707Z,1478841703.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:44.117Z,1478841704.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:44.510Z,1478841704.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:44.906Z,1478841704.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:45.309Z,1478841705.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:45.686Z,1478841705.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:46.085Z,1478841706.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:46.512Z,1478841706.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:46.927Z,1478841706.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:47.299Z,1478841707.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:47.693Z,1478841707.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:48.093Z,1478841708.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:48.495Z,1478841708.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:48.933Z,1478841708.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:49.309Z,1478841709.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:49.710Z,1478841709.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:50.145Z,1478841710.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:50.504Z,1478841710.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:50.940Z,1478841710.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:51.336Z,1478841711.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:51.706Z,1478841711.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:52.104Z,1478841712.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:52.506Z,1478841712.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:52.907Z,1478841712.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:53.306Z,1478841713.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:53.693Z,1478841713.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:54.105Z,1478841714.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:54.497Z,1478841714.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:54.901Z,1478841714.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:55.310Z,1478841715.310 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:55.310Z,1478841715.310 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2016-11-11T05:21:55.310Z,1478841715.310 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:21:55.324Z,1478841715.324 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:55.324Z,1478841715.324 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2016-11-11T05:21:55.324Z,1478841715.324 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T05:21:55.326Z,1478841715.326 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:55.327Z,1478841715.327 [DeadReckonWithRespectToWater] Software Fault, FailCount= 12
2016-11-11T05:21:55.327Z,1478841715.327 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T05:21:55.329Z,1478841715.329 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:55.329Z,1478841715.329 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2016-11-11T05:21:55.329Z,1478841715.329 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:21:55.331Z,1478841715.331 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:55.331Z,1478841715.331 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 12
2016-11-11T05:21:55.331Z,1478841715.331 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:21:55.361Z,1478841715.361 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:21:55.361Z,1478841715.361 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T05:21:55.361Z,1478841715.361 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T05:21:55.362Z,1478841715.362 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:21:55.362Z,1478841715.362 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:21:55.739Z,1478841715.739 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:21:55.739Z,1478841715.739 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2016-11-11T05:21:55.744Z,1478841715.744 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T05:21:55.744Z,1478841715.744 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2016-11-11T05:21:55.744Z,1478841715.744 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T05:21:55.744Z,1478841715.744 [DeadReckonWithRespectToWater] No Fault, FailCount= 12
2016-11-11T05:21:55.745Z,1478841715.745 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:21:55.745Z,1478841715.745 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2016-11-11T05:21:55.746Z,1478841715.746 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:21:55.746Z,1478841715.746 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 12
2016-11-11T05:21:56.118Z,1478841716.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:21:56.118Z,1478841716.118 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:21:56.119Z,1478841716.119 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:21:56.123Z,1478841716.123 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T05:21:56.124Z,1478841716.124 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:21:56.124Z,1478841716.124 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:21:56.124Z,1478841716.124 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T05:21:56.125Z,1478841716.125 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:21:56.125Z,1478841716.125 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:21:56.125Z,1478841716.125 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:21:56.126Z,1478841716.126 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:21:56.126Z,1478841716.126 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:21:56.127Z,1478841716.127 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:21:56.131Z,1478841716.131 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:21:56.132Z,1478841716.132 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:21:56.493Z,1478841716.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T05:21:56.494Z,1478841716.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:56.893Z,1478841716.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T05:21:56.894Z,1478841716.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:57.291Z,1478841717.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T05:21:57.292Z,1478841717.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:57.693Z,1478841717.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T05:21:57.694Z,1478841717.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:58.095Z,1478841718.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T05:21:58.100Z,1478841718.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:58.509Z,1478841718.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T05:21:58.510Z,1478841718.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:58.906Z,1478841718.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T05:21:58.908Z,1478841718.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:59.325Z,1478841719.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T05:21:59.326Z,1478841719.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:21:59.693Z,1478841719.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T05:21:59.695Z,1478841719.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:00.100Z,1478841720.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T05:22:00.101Z,1478841720.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:00.495Z,1478841720.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T05:22:00.496Z,1478841720.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:00.899Z,1478841720.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T05:22:00.900Z,1478841720.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:01.313Z,1478841721.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T05:22:01.314Z,1478841721.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:01.709Z,1478841721.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T05:22:01.710Z,1478841721.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:02.113Z,1478841722.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T05:22:02.114Z,1478841722.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:02.509Z,1478841722.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T05:22:02.510Z,1478841722.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:02.897Z,1478841722.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T05:22:02.898Z,1478841722.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:03.341Z,1478841723.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T05:22:03.342Z,1478841723.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:03.717Z,1478841723.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T05:22:03.718Z,1478841723.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:04.085Z,1478841724.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T05:22:04.086Z,1478841724.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:04.521Z,1478841724.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T05:22:04.522Z,1478841724.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:04.916Z,1478841724.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T05:22:04.918Z,1478841724.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:05.329Z,1478841725.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T05:22:05.330Z,1478841725.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:05.719Z,1478841725.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T05:22:05.720Z,1478841725.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:06.088Z,1478841726.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T05:22:06.089Z,1478841726.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:06.486Z,1478841726.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T05:22:06.487Z,1478841726.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:06.890Z,1478841726.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T05:22:06.891Z,1478841726.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:07.298Z,1478841727.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T05:22:07.299Z,1478841727.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:07.321Z,1478841727.321 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T05:22:07.321Z,1478841727.321 [Default:CheckIn:C.Wait] Stopped
2016-11-11T05:22:07.321Z,1478841727.321 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T05:22:07.321Z,1478841727.321 [Default:CheckIn:D] Running Loop=1
2016-11-11T05:22:07.703Z,1478841727.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T05:22:07.704Z,1478841727.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:07.725Z,1478841727.725 [Default:CheckIn:D] Stopped
2016-11-11T05:22:07.725Z,1478841727.726 [Default:CheckIn:E] Running Loop=1
2016-11-11T05:22:08.104Z,1478841728.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T05:22:08.105Z,1478841728.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:08.111Z,1478841728.111 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 32.106919 min 
2016-11-11T05:22:08.131Z,1478841728.131 [Default:CheckIn:E] Stopped
2016-11-11T05:22:08.131Z,1478841728.131 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T05:22:08.132Z,1478841728.132 [Default:CheckIn] Stopped
2016-11-11T05:22:08.132Z,1478841728.132 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T05:22:08.132Z,1478841728.132 [Default:CheckIn](INFO): Running loop #4
2016-11-11T05:22:08.132Z,1478841728.132 [Default:CheckIn] Running Loop=4
2016-11-11T05:22:08.132Z,1478841728.132 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T05:22:08.132Z,1478841728.132 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T05:22:11.333Z,1478841731.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T05:22:11.334Z,1478841731.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:11.466Z,1478841731.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2016-11-11T05:22:11.471Z,1478841731.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:11.834Z,1478841731.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2016-11-11T05:22:11.835Z,1478841731.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:12.221Z,1478841732.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2016-11-11T05:22:12.222Z,1478841732.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:12.613Z,1478841732.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2016-11-11T05:22:12.614Z,1478841732.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:13.003Z,1478841733.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2016-11-11T05:22:13.004Z,1478841733.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:13.407Z,1478841733.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2016-11-11T05:22:13.408Z,1478841733.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:13.811Z,1478841733.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2016-11-11T05:22:13.812Z,1478841733.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:14.221Z,1478841734.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2016-11-11T05:22:14.222Z,1478841734.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:14.617Z,1478841734.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2016-11-11T05:22:14.618Z,1478841734.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:15.018Z,1478841735.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2016-11-11T05:22:15.020Z,1478841735.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:15.417Z,1478841735.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:15.797Z,1478841735.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:16.230Z,1478841736.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:16.629Z,1478841736.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:17.033Z,1478841737.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:17.398Z,1478841737.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:17.853Z,1478841737.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:18.261Z,1478841738.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:18.617Z,1478841738.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:19.049Z,1478841739.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:19.417Z,1478841739.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:19.845Z,1478841739.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:20.229Z,1478841740.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:20.607Z,1478841740.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:21.006Z,1478841741.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:21.421Z,1478841741.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:21.825Z,1478841741.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:22.219Z,1478841742.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:22.614Z,1478841742.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:23.007Z,1478841743.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:23.417Z,1478841743.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:23.815Z,1478841743.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:24.214Z,1478841744.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:24.620Z,1478841744.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:25.029Z,1478841745.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:25.420Z,1478841745.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:25.820Z,1478841745.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:26.211Z,1478841746.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:26.618Z,1478841746.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:27.009Z,1478841747.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:27.422Z,1478841747.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:27.820Z,1478841747.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:28.233Z,1478841748.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:28.616Z,1478841748.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:29.025Z,1478841749.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:29.416Z,1478841749.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:29.819Z,1478841749.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:30.223Z,1478841750.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:30.624Z,1478841750.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:31.029Z,1478841751.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:31.424Z,1478841751.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:31.797Z,1478841751.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:32.203Z,1478841752.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:32.664Z,1478841752.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:33.004Z,1478841753.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:33.439Z,1478841753.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:33.815Z,1478841753.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:34.253Z,1478841754.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:34.639Z,1478841754.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:35.006Z,1478841755.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:35.417Z,1478841755.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:35.805Z,1478841755.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:36.212Z,1478841756.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:36.617Z,1478841756.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:37.025Z,1478841757.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:37.440Z,1478841757.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:37.806Z,1478841757.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:38.212Z,1478841758.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:38.613Z,1478841758.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:39.017Z,1478841759.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:39.425Z,1478841759.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:39.821Z,1478841759.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:40.221Z,1478841760.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:40.625Z,1478841760.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:41.019Z,1478841761.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:41.410Z,1478841761.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:41.811Z,1478841761.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:42.229Z,1478841762.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:42.622Z,1478841762.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:43.022Z,1478841763.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:43.441Z,1478841763.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:43.826Z,1478841763.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:44.214Z,1478841764.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:44.618Z,1478841764.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:45.016Z,1478841765.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:45.433Z,1478841765.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:45.813Z,1478841765.813 [PNI_TCM](ERROR): CRC does not match. Expected:0x6798 got:0x23914
2016-11-11T05:22:45.828Z,1478841765.828 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T05:22:45.828Z,1478841765.828 [BPC1] Data Fault, FailCount= 1
2016-11-11T05:22:45.828Z,1478841765.828 [BPC1](ERROR): Data Fault
2016-11-11T05:22:45.856Z,1478841765.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:45.872Z,1478841765.872 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:22:46.225Z,1478841766.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:46.610Z,1478841766.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:47.021Z,1478841767.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:47.038Z,1478841767.038 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:22:47.038Z,1478841767.038 [BPC1] No Fault, FailCount= 1
2016-11-11T05:22:47.473Z,1478841767.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:47.838Z,1478841767.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:48.217Z,1478841768.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:48.628Z,1478841768.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:49.033Z,1478841769.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:49.437Z,1478841769.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:49.802Z,1478841769.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:50.234Z,1478841770.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:50.605Z,1478841770.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:51.007Z,1478841771.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:51.411Z,1478841771.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:51.817Z,1478841771.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:52.215Z,1478841772.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:52.607Z,1478841772.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:53.007Z,1478841773.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:53.425Z,1478841773.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:53.802Z,1478841773.802 [PNI_TCM](ERROR): CRC does not match. Expected:0x37290 got:0x49153
2016-11-11T05:22:53.822Z,1478841773.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:54.208Z,1478841774.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:54.618Z,1478841774.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:55.018Z,1478841775.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:55.440Z,1478841775.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:55.810Z,1478841775.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:56.206Z,1478841776.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:56.616Z,1478841776.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:57.009Z,1478841777.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:57.426Z,1478841777.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:57.820Z,1478841777.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:58.222Z,1478841778.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:58.620Z,1478841778.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:59.029Z,1478841779.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:59.401Z,1478841779.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:22:59.851Z,1478841779.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:00.191Z,1478841780.191 [PNI_TCM](ERROR): CRC does not match. Expected:0x33906 got:0x49180
2016-11-11T05:23:00.271Z,1478841780.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:00.627Z,1478841780.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:01.010Z,1478841781.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:01.445Z,1478841781.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:01.817Z,1478841781.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:02.230Z,1478841782.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:02.608Z,1478841782.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:03.045Z,1478841783.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:03.421Z,1478841783.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:03.817Z,1478841783.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:04.225Z,1478841784.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:04.607Z,1478841784.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:05.017Z,1478841785.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:05.408Z,1478841785.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:05.809Z,1478841785.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:06.208Z,1478841786.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:06.618Z,1478841786.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:07.021Z,1478841787.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:07.417Z,1478841787.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:07.812Z,1478841787.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:08.216Z,1478841788.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:15.348Z,1478841795.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:15.508Z,1478841795.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:15.901Z,1478841795.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:16.341Z,1478841796.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:16.688Z,1478841796.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:17.132Z,1478841797.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:17.537Z,1478841797.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:17.880Z,1478841797.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:18.289Z,1478841798.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:18.716Z,1478841798.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:19.084Z,1478841799.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:19.513Z,1478841799.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:19.873Z,1478841799.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:20.316Z,1478841800.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:20.681Z,1478841800.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:21.098Z,1478841801.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:21.525Z,1478841801.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:21.918Z,1478841801.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:22.317Z,1478841802.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:22.695Z,1478841802.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:23.101Z,1478841803.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:23.506Z,1478841803.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:23.890Z,1478841803.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:24.305Z,1478841804.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:24.710Z,1478841804.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:25.108Z,1478841805.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:25.517Z,1478841805.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:25.930Z,1478841805.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:26.281Z,1478841806.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:26.673Z,1478841806.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:27.075Z,1478841807.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:27.485Z,1478841807.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:27.879Z,1478841807.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:28.285Z,1478841808.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:28.674Z,1478841808.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:29.078Z,1478841809.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:29.529Z,1478841809.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:29.880Z,1478841809.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:30.321Z,1478841810.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:30.696Z,1478841810.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:31.125Z,1478841811.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:31.506Z,1478841811.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:31.878Z,1478841811.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:32.266Z,1478841812.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:32.668Z,1478841812.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:33.069Z,1478841813.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:33.498Z,1478841813.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:33.901Z,1478841813.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:34.292Z,1478841814.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:34.669Z,1478841814.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:35.078Z,1478841815.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:35.475Z,1478841815.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:35.881Z,1478841815.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:36.286Z,1478841816.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:36.683Z,1478841816.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:37.085Z,1478841817.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:37.479Z,1478841817.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:37.873Z,1478841817.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:38.274Z,1478841818.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:38.683Z,1478841818.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:39.073Z,1478841819.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:39.486Z,1478841819.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:39.886Z,1478841819.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:40.287Z,1478841820.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:40.677Z,1478841820.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:41.077Z,1478841821.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:41.488Z,1478841821.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:41.874Z,1478841821.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:42.282Z,1478841822.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:42.687Z,1478841822.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:43.086Z,1478841823.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:43.525Z,1478841823.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:43.902Z,1478841823.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:44.283Z,1478841824.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:44.685Z,1478841824.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:45.101Z,1478841825.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:45.486Z,1478841825.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:45.925Z,1478841825.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:46.319Z,1478841826.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:46.684Z,1478841826.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:47.083Z,1478841827.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:47.479Z,1478841827.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:47.882Z,1478841827.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:48.294Z,1478841828.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:48.688Z,1478841828.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:49.105Z,1478841829.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:49.483Z,1478841829.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:49.861Z,1478841829.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:50.278Z,1478841830.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:50.680Z,1478841830.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:51.084Z,1478841831.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:51.487Z,1478841831.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:51.893Z,1478841831.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:52.283Z,1478841832.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:52.674Z,1478841832.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:53.086Z,1478841833.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:53.496Z,1478841833.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:53.874Z,1478841833.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:54.288Z,1478841834.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:54.689Z,1478841834.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:55.122Z,1478841835.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:55.485Z,1478841835.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:55.880Z,1478841835.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:56.281Z,1478841836.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:56.685Z,1478841836.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:57.076Z,1478841837.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:57.497Z,1478841837.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:57.945Z,1478841837.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:58.293Z,1478841838.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:58.705Z,1478841838.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:59.086Z,1478841839.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:59.491Z,1478841839.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:23:59.901Z,1478841839.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:00.293Z,1478841840.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:00.706Z,1478841840.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:01.109Z,1478841841.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:01.465Z,1478841841.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:01.868Z,1478841841.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:02.275Z,1478841842.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:02.676Z,1478841842.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:03.089Z,1478841843.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:03.483Z,1478841843.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:03.893Z,1478841843.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:04.273Z,1478841844.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:04.683Z,1478841844.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:05.078Z,1478841845.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:05.479Z,1478841845.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:05.873Z,1478841845.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:06.289Z,1478841846.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:06.704Z,1478841846.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:07.086Z,1478841847.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:07.478Z,1478841847.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:07.885Z,1478841847.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:08.284Z,1478841848.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:11.549Z,1478841851.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:11.701Z,1478841851.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:12.075Z,1478841852.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:12.454Z,1478841852.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:12.885Z,1478841852.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:13.283Z,1478841853.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:13.649Z,1478841853.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:14.065Z,1478841854.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:14.456Z,1478841854.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:14.891Z,1478841854.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:15.300Z,1478841855.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:15.647Z,1478841855.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:16.034Z,1478841856.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:16.436Z,1478841856.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:16.833Z,1478841856.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:17.268Z,1478841857.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:17.666Z,1478841857.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:18.065Z,1478841858.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:18.436Z,1478841858.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:18.837Z,1478841858.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:19.238Z,1478841859.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:19.640Z,1478841859.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:20.037Z,1478841860.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:20.447Z,1478841860.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:20.853Z,1478841860.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:21.273Z,1478841861.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:21.638Z,1478841861.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:22.041Z,1478841862.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:22.446Z,1478841862.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:22.872Z,1478841862.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:23.252Z,1478841863.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:23.656Z,1478841863.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:24.061Z,1478841864.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:24.460Z,1478841864.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:24.848Z,1478841864.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:25.252Z,1478841865.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:25.656Z,1478841865.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:26.050Z,1478841866.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:26.462Z,1478841866.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:26.869Z,1478841866.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:27.309Z,1478841867.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:27.656Z,1478841867.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:28.062Z,1478841868.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:28.452Z,1478841868.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:28.862Z,1478841868.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:29.278Z,1478841869.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:29.662Z,1478841869.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:30.058Z,1478841870.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:30.442Z,1478841870.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:30.861Z,1478841870.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:31.263Z,1478841871.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:31.641Z,1478841871.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:32.049Z,1478841872.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:32.454Z,1478841872.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:32.849Z,1478841872.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:33.252Z,1478841873.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:33.638Z,1478841873.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:34.053Z,1478841874.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:34.447Z,1478841874.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:34.840Z,1478841874.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:35.253Z,1478841875.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:35.654Z,1478841875.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:36.058Z,1478841876.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:36.444Z,1478841876.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:36.845Z,1478841876.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:37.257Z,1478841877.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:37.645Z,1478841877.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:38.043Z,1478841878.043 [PNI_TCM](ERROR): CRC does not match. Expected:0x32413 got:0x34587
2016-11-11T05:24:38.065Z,1478841878.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:38.457Z,1478841878.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:38.861Z,1478841878.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:39.252Z,1478841879.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:39.643Z,1478841879.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:40.032Z,1478841880.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:40.461Z,1478841880.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:40.836Z,1478841880.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:41.327Z,1478841881.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:41.659Z,1478841881.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:42.081Z,1478841882.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:42.435Z,1478841882.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:42.865Z,1478841882.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:43.278Z,1478841883.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:43.645Z,1478841883.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:44.049Z,1478841884.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:44.449Z,1478841884.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:44.857Z,1478841884.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:45.242Z,1478841885.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:45.640Z,1478841885.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:46.047Z,1478841886.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:46.448Z,1478841886.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:46.841Z,1478841886.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:47.257Z,1478841887.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:47.654Z,1478841887.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:48.057Z,1478841888.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:48.442Z,1478841888.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:48.839Z,1478841888.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:49.249Z,1478841889.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:49.652Z,1478841889.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:50.060Z,1478841890.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:50.457Z,1478841890.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:50.854Z,1478841890.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:51.248Z,1478841891.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:51.649Z,1478841891.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:52.049Z,1478841892.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:52.448Z,1478841892.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:52.829Z,1478841892.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:53.255Z,1478841893.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:53.653Z,1478841893.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:54.054Z,1478841894.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:54.430Z,1478841894.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:54.857Z,1478841894.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:55.287Z,1478841895.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:55.677Z,1478841895.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:56.052Z,1478841896.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:56.485Z,1478841896.485 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:56.486Z,1478841896.486 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2016-11-11T05:24:56.486Z,1478841896.486 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:24:56.488Z,1478841896.488 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:56.488Z,1478841896.488 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2016-11-11T05:24:56.488Z,1478841896.488 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T05:24:56.490Z,1478841896.490 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:56.490Z,1478841896.490 [DeadReckonWithRespectToWater] Software Fault, FailCount= 13
2016-11-11T05:24:56.490Z,1478841896.490 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T05:24:56.492Z,1478841896.492 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:56.492Z,1478841896.492 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2016-11-11T05:24:56.493Z,1478841896.493 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:24:56.494Z,1478841896.494 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:56.495Z,1478841896.494 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 13
2016-11-11T05:24:56.495Z,1478841896.495 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:24:56.507Z,1478841896.507 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:24:56.508Z,1478841896.508 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T05:24:56.508Z,1478841896.508 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T05:24:56.508Z,1478841896.508 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:24:56.508Z,1478841896.509 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:24:56.866Z,1478841896.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:24:56.866Z,1478841896.866 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2016-11-11T05:24:56.867Z,1478841896.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T05:24:56.867Z,1478841896.867 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2016-11-11T05:24:56.867Z,1478841896.867 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T05:24:56.867Z,1478841896.867 [DeadReckonWithRespectToWater] No Fault, FailCount= 13
2016-11-11T05:24:56.868Z,1478841896.868 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:24:56.868Z,1478841896.868 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2016-11-11T05:24:56.869Z,1478841896.869 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:24:56.869Z,1478841896.869 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 13
2016-11-11T05:24:57.264Z,1478841897.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:24:57.265Z,1478841897.265 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:24:57.265Z,1478841897.265 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:24:57.265Z,1478841897.265 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T05:24:57.266Z,1478841897.266 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:24:57.266Z,1478841897.266 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:24:57.266Z,1478841897.266 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T05:24:57.267Z,1478841897.267 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:24:57.268Z,1478841897.267 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:24:57.268Z,1478841897.268 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:24:57.268Z,1478841897.268 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:24:57.269Z,1478841897.269 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:24:57.269Z,1478841897.269 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:24:57.269Z,1478841897.270 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:24:57.270Z,1478841897.270 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:24:57.666Z,1478841897.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T05:24:57.667Z,1478841897.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:58.057Z,1478841898.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T05:24:58.058Z,1478841898.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:58.435Z,1478841898.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T05:24:58.437Z,1478841898.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:58.831Z,1478841898.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2016-11-11T05:24:58.833Z,1478841898.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:59.269Z,1478841899.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T05:24:59.270Z,1478841899.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:24:59.647Z,1478841899.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T05:24:59.660Z,1478841899.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:00.046Z,1478841900.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T05:25:00.047Z,1478841900.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:00.439Z,1478841900.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T05:25:00.440Z,1478841900.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:00.844Z,1478841900.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T05:25:00.845Z,1478841900.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:01.241Z,1478841901.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T05:25:01.242Z,1478841901.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:01.649Z,1478841901.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T05:25:01.650Z,1478841901.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:02.045Z,1478841902.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T05:25:02.046Z,1478841902.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:02.456Z,1478841902.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T05:25:02.457Z,1478841902.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:02.851Z,1478841902.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T05:25:02.852Z,1478841902.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:03.239Z,1478841903.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T05:25:03.240Z,1478841903.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:03.637Z,1478841903.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T05:25:03.638Z,1478841903.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:04.042Z,1478841904.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T05:25:04.044Z,1478841904.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:04.445Z,1478841904.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T05:25:04.446Z,1478841904.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:04.842Z,1478841904.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T05:25:04.843Z,1478841904.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:05.256Z,1478841905.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T05:25:05.257Z,1478841905.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:05.650Z,1478841905.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T05:25:05.651Z,1478841905.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:06.047Z,1478841906.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T05:25:06.048Z,1478841906.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:06.442Z,1478841906.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T05:25:06.443Z,1478841906.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:06.848Z,1478841906.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T05:25:06.849Z,1478841906.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:07.245Z,1478841907.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T05:25:07.246Z,1478841907.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:07.649Z,1478841907.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T05:25:07.650Z,1478841907.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:08.054Z,1478841908.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T05:25:08.055Z,1478841908.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:08.461Z,1478841908.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T05:25:08.461Z,1478841908.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:11.784Z,1478841911.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2016-11-11T05:25:11.785Z,1478841911.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:11.885Z,1478841911.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2016-11-11T05:25:11.886Z,1478841911.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:12.312Z,1478841912.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2016-11-11T05:25:12.314Z,1478841912.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:12.686Z,1478841912.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2016-11-11T05:25:12.687Z,1478841912.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:13.111Z,1478841913.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2016-11-11T05:25:13.112Z,1478841913.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:13.484Z,1478841913.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2016-11-11T05:25:13.486Z,1478841913.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:13.916Z,1478841913.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2016-11-11T05:25:13.917Z,1478841913.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:14.290Z,1478841914.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2016-11-11T05:25:14.291Z,1478841914.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:14.697Z,1478841914.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2016-11-11T05:25:14.698Z,1478841914.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:15.096Z,1478841915.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2016-11-11T05:25:15.097Z,1478841915.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:15.478Z,1478841915.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2016-11-11T05:25:15.479Z,1478841915.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:15.885Z,1478841915.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2016-11-11T05:25:15.886Z,1478841915.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:16.284Z,1478841916.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2016-11-11T05:25:16.285Z,1478841916.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:16.678Z,1478841916.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:17.101Z,1478841917.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:17.492Z,1478841917.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:17.891Z,1478841917.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:18.285Z,1478841918.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:18.682Z,1478841918.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:19.088Z,1478841919.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:19.494Z,1478841919.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:19.890Z,1478841919.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:20.292Z,1478841920.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:20.690Z,1478841920.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:21.103Z,1478841921.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:21.482Z,1478841921.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:21.883Z,1478841921.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:22.289Z,1478841922.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:22.692Z,1478841922.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:23.101Z,1478841923.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:23.501Z,1478841923.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:23.901Z,1478841923.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:24.291Z,1478841924.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:24.669Z,1478841924.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:25.073Z,1478841925.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:25.471Z,1478841925.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:25.934Z,1478841925.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:26.297Z,1478841926.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:26.725Z,1478841926.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:27.090Z,1478841927.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:27.511Z,1478841927.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:27.902Z,1478841927.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:28.293Z,1478841928.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:28.684Z,1478841928.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:29.097Z,1478841929.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:29.492Z,1478841929.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:29.900Z,1478841929.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:30.288Z,1478841930.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:30.686Z,1478841930.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:31.086Z,1478841931.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:31.495Z,1478841931.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:31.870Z,1478841931.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:32.300Z,1478841932.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:32.697Z,1478841932.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:33.096Z,1478841933.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:33.478Z,1478841933.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:33.877Z,1478841933.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:34.275Z,1478841934.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:34.677Z,1478841934.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:35.083Z,1478841935.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:35.489Z,1478841935.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:35.889Z,1478841935.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:36.282Z,1478841936.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:36.689Z,1478841936.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:37.081Z,1478841937.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:37.480Z,1478841937.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:37.881Z,1478841937.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:38.290Z,1478841938.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:38.697Z,1478841938.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:39.091Z,1478841939.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:39.478Z,1478841939.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:39.934Z,1478841939.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:40.291Z,1478841940.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:40.688Z,1478841940.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:41.129Z,1478841941.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:41.494Z,1478841941.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:41.931Z,1478841941.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:42.304Z,1478841942.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:42.689Z,1478841942.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:43.069Z,1478841943.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:43.501Z,1478841943.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:43.869Z,1478841943.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:44.294Z,1478841944.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:44.699Z,1478841944.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:45.083Z,1478841945.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:45.477Z,1478841945.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:45.877Z,1478841945.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:46.280Z,1478841946.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:46.313Z,1478841946.313 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T05:25:46.684Z,1478841946.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:47.089Z,1478841947.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:47.481Z,1478841947.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:47.889Z,1478841947.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:48.276Z,1478841948.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:48.677Z,1478841948.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:49.084Z,1478841949.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:49.485Z,1478841949.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:49.888Z,1478841949.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:50.301Z,1478841950.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:50.693Z,1478841950.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:51.093Z,1478841951.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:51.508Z,1478841951.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:51.890Z,1478841951.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:52.284Z,1478841952.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:52.693Z,1478841952.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:53.097Z,1478841953.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:53.505Z,1478841953.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:53.904Z,1478841953.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:54.333Z,1478841954.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:54.677Z,1478841954.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:55.088Z,1478841955.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:55.520Z,1478841955.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:55.897Z,1478841955.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:56.325Z,1478841956.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:56.718Z,1478841956.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:57.123Z,1478841957.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:57.478Z,1478841957.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:57.888Z,1478841957.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:58.286Z,1478841958.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:58.682Z,1478841958.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:59.102Z,1478841959.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:59.491Z,1478841959.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:25:59.896Z,1478841959.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:00.302Z,1478841960.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:00.679Z,1478841960.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:01.078Z,1478841961.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:01.490Z,1478841961.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:01.892Z,1478841961.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:02.304Z,1478841962.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:02.696Z,1478841962.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:03.101Z,1478841963.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:03.485Z,1478841963.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:03.890Z,1478841963.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:04.298Z,1478841964.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:04.687Z,1478841964.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:05.097Z,1478841965.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:05.497Z,1478841965.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:05.896Z,1478841965.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:06.288Z,1478841966.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:06.698Z,1478841966.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:07.076Z,1478841967.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:07.480Z,1478841967.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:07.910Z,1478841967.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:08.309Z,1478841968.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:08.761Z,1478841968.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:11.966Z,1478841971.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:12.105Z,1478841972.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:12.477Z,1478841972.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:12.865Z,1478841972.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:13.277Z,1478841973.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:13.665Z,1478841973.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:14.033Z,1478841974.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:14.436Z,1478841974.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:14.837Z,1478841974.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:15.249Z,1478841975.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:15.643Z,1478841975.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:16.043Z,1478841976.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:16.438Z,1478841976.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:16.840Z,1478841976.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:17.249Z,1478841977.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:17.638Z,1478841977.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:18.048Z,1478841978.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:18.457Z,1478841978.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:18.851Z,1478841978.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:19.243Z,1478841979.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:19.644Z,1478841979.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:20.049Z,1478841980.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:20.444Z,1478841980.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:20.834Z,1478841980.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:21.261Z,1478841981.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:21.658Z,1478841981.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:22.057Z,1478841982.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:22.461Z,1478841982.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:22.835Z,1478841982.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:23.246Z,1478841983.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:23.650Z,1478841983.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:24.047Z,1478841984.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:24.450Z,1478841984.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:24.857Z,1478841984.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:25.249Z,1478841985.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:25.677Z,1478841985.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:26.073Z,1478841986.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:26.440Z,1478841986.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:26.846Z,1478841986.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:27.277Z,1478841987.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:27.647Z,1478841987.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:28.104Z,1478841988.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:28.454Z,1478841988.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:28.829Z,1478841988.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:29.236Z,1478841989.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:29.637Z,1478841989.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:30.044Z,1478841990.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:30.449Z,1478841990.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:30.853Z,1478841990.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:31.242Z,1478841991.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:31.641Z,1478841991.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:32.042Z,1478841992.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:32.449Z,1478841992.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:32.839Z,1478841992.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:33.257Z,1478841993.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:33.650Z,1478841993.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:34.049Z,1478841994.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:34.438Z,1478841994.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:34.839Z,1478841994.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:35.250Z,1478841995.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:35.640Z,1478841995.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:36.051Z,1478841996.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:36.450Z,1478841996.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:36.861Z,1478841996.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:37.242Z,1478841997.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:37.645Z,1478841997.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:38.045Z,1478841998.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:38.440Z,1478841998.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:38.833Z,1478841998.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:39.255Z,1478841999.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:39.664Z,1478841999.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:40.043Z,1478842000.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:40.449Z,1478842000.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:40.893Z,1478842000.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:41.247Z,1478842001.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:41.665Z,1478842001.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:42.061Z,1478842002.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:42.485Z,1478842002.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:42.886Z,1478842002.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:43.244Z,1478842003.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:43.642Z,1478842003.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:44.064Z,1478842004.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:44.442Z,1478842004.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:44.861Z,1478842004.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:45.251Z,1478842005.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:45.651Z,1478842005.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:46.042Z,1478842006.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:46.449Z,1478842006.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:46.845Z,1478842006.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:47.252Z,1478842007.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:47.657Z,1478842007.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:48.053Z,1478842008.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:48.454Z,1478842008.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:48.862Z,1478842008.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:49.229Z,1478842009.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:49.629Z,1478842009.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:50.037Z,1478842010.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:50.437Z,1478842010.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:50.868Z,1478842010.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:51.268Z,1478842011.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:51.663Z,1478842011.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:52.038Z,1478842012.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:52.439Z,1478842012.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:52.841Z,1478842012.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:53.241Z,1478842013.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:53.638Z,1478842013.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:54.052Z,1478842014.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:54.454Z,1478842014.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:54.851Z,1478842014.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:55.243Z,1478842015.243 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T05:26:55.243Z,1478842015.243 [BPC1] Data Fault, FailCount= 1
2016-11-11T05:26:55.243Z,1478842015.243 [BPC1](ERROR): Data Fault
2016-11-11T05:26:55.256Z,1478842015.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:55.285Z,1478842015.285 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:26:55.649Z,1478842015.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:56.053Z,1478842016.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:56.437Z,1478842016.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:56.470Z,1478842016.470 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:26:56.470Z,1478842016.470 [BPC1] No Fault, FailCount= 1
2016-11-11T05:26:56.913Z,1478842016.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:57.262Z,1478842017.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:57.696Z,1478842017.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:58.049Z,1478842018.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:58.433Z,1478842018.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:58.829Z,1478842018.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:59.232Z,1478842019.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:26:59.633Z,1478842019.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:00.063Z,1478842020.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:00.443Z,1478842020.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:00.849Z,1478842020.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:01.245Z,1478842021.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:01.642Z,1478842021.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:02.045Z,1478842022.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:02.438Z,1478842022.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:02.797Z,1478842022.797 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T05:27:02.797Z,1478842022.797 [NAL9602] Data Fault, FailCount= 4
2016-11-11T05:27:02.797Z,1478842022.797 [NAL9602](ERROR): Data Fault
2016-11-11T05:27:02.861Z,1478842022.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:02.890Z,1478842022.890 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T05:27:03.197Z,1478842023.197 [NAL9602](INFO): Powering down
2016-11-11T05:27:03.261Z,1478842023.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:03.628Z,1478842023.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:04.033Z,1478842024.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:04.082Z,1478842024.082 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T05:27:04.082Z,1478842024.082 [NAL9602] No Fault, FailCount= 4
2016-11-11T05:27:04.433Z,1478842024.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:04.832Z,1478842024.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:05.241Z,1478842025.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:05.645Z,1478842025.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:06.036Z,1478842026.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:06.441Z,1478842026.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:06.845Z,1478842026.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:07.238Z,1478842027.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:07.640Z,1478842027.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:08.045Z,1478842028.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:08.397Z,1478842028.397 [NAL9602](INFO): Powering up NAL9602
2016-11-11T05:27:08.442Z,1478842028.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:08.448Z,1478842028.448 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T05:22:08.1Z
2016-11-11T05:27:08.448Z,1478842028.448 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T05:27:08.448Z,1478842028.448 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T05:27:08.841Z,1478842028.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:12.601Z,1478842032.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:12.655Z,1478842032.655 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0016.lzma
2016-11-11T05:27:12.721Z,1478842032.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:13.121Z,1478842033.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:13.449Z,1478842033.449 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0016.lzma.bak
2016-11-11T05:27:13.449Z,1478842033.449 [DataOverHttps](INFO): SBD MOMSN=4555046
2016-11-11T05:27:13.517Z,1478842033.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:14.901Z,1478842034.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:15.022Z,1478842035.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:18.261Z,1478842038.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:18.382Z,1478842038.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:18.741Z,1478842038.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:19.145Z,1478842039.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:19.493Z,1478842039.493 [NAL9602](INFO): NAL9602 initialized
2016-11-11T05:27:19.539Z,1478842039.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:19.931Z,1478842039.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:23.191Z,1478842043.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:23.249Z,1478842043.249 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20161111T044527/Express0017.lzma
2016-11-11T05:27:23.337Z,1478842043.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:23.703Z,1478842043.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:24.049Z,1478842044.049 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0017.lzma.bak
2016-11-11T05:27:24.049Z,1478842044.049 [DataOverHttps](INFO): SBD MOMSN=4555048
2016-11-11T05:27:24.113Z,1478842044.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:25.498Z,1478842045.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:25.503Z,1478842045.503 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T05:27:25.503Z,1478842045.503 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T05:27:25.503Z,1478842045.503 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T05:27:25.633Z,1478842045.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:28.847Z,1478842048.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:28.969Z,1478842048.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:29.345Z,1478842049.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:29.751Z,1478842049.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:30.173Z,1478842050.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:30.515Z,1478842050.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:30.925Z,1478842050.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:31.357Z,1478842051.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:31.726Z,1478842051.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:32.160Z,1478842052.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:32.559Z,1478842052.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:32.954Z,1478842052.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:33.320Z,1478842053.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:33.725Z,1478842053.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:34.124Z,1478842054.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:34.553Z,1478842054.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:34.939Z,1478842054.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:35.337Z,1478842055.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:35.740Z,1478842055.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:36.119Z,1478842056.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:36.522Z,1478842056.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:36.933Z,1478842056.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:37.314Z,1478842057.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:37.713Z,1478842057.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:38.141Z,1478842058.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:38.542Z,1478842058.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:38.942Z,1478842058.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:39.345Z,1478842059.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:39.716Z,1478842059.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:40.117Z,1478842060.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:40.530Z,1478842060.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:40.946Z,1478842060.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:41.330Z,1478842061.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:41.733Z,1478842061.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:42.129Z,1478842062.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:42.535Z,1478842062.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:42.925Z,1478842062.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:43.321Z,1478842063.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:43.730Z,1478842063.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:44.173Z,1478842064.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:44.524Z,1478842064.524 [PNI_TCM](ERROR): CRC does not match. Expected:0x23074 got:0x6978
2016-11-11T05:27:44.573Z,1478842064.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:44.933Z,1478842064.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:45.345Z,1478842065.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:45.730Z,1478842065.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:46.153Z,1478842066.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:46.566Z,1478842066.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:46.943Z,1478842066.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:47.336Z,1478842067.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:47.749Z,1478842067.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:48.130Z,1478842068.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:48.540Z,1478842068.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:48.936Z,1478842068.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:49.328Z,1478842069.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:49.718Z,1478842069.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:50.136Z,1478842070.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:50.571Z,1478842070.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:50.929Z,1478842070.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:51.322Z,1478842071.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:51.712Z,1478842071.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:52.131Z,1478842072.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:52.499Z,1478842072.499 [PNI_TCM](ERROR): CRC does not match. Expected:0x20536 got:0x63728
2016-11-11T05:27:52.518Z,1478842072.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:52.919Z,1478842072.919 [PNI_TCM](ERROR): CRC does not match. Expected:0x39518 got:0x1305
2016-11-11T05:27:52.970Z,1478842072.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:53.333Z,1478842073.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:53.729Z,1478842073.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:54.113Z,1478842074.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:54.511Z,1478842074.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:54.914Z,1478842074.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:55.333Z,1478842075.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:55.727Z,1478842075.727 [PNI_TCM](ERROR): CRC does not match. Expected:0x22530 got:0x31888
2016-11-11T05:27:55.765Z,1478842075.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:56.127Z,1478842076.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:56.533Z,1478842076.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:56.933Z,1478842076.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:57.315Z,1478842077.315 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:57.315Z,1478842077.315 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2016-11-11T05:27:57.315Z,1478842077.315 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:27:57.317Z,1478842077.317 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:57.317Z,1478842077.317 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2016-11-11T05:27:57.317Z,1478842077.317 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T05:27:57.319Z,1478842077.319 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:57.319Z,1478842077.319 [DeadReckonWithRespectToWater] Software Fault, FailCount= 14
2016-11-11T05:27:57.319Z,1478842077.319 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T05:27:57.321Z,1478842077.321 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:57.322Z,1478842077.322 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2016-11-11T05:27:57.322Z,1478842077.322 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:27:57.324Z,1478842077.324 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:57.324Z,1478842077.324 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 14
2016-11-11T05:27:57.324Z,1478842077.324 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:27:57.337Z,1478842077.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:27:57.337Z,1478842077.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T05:27:57.337Z,1478842077.337 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T05:27:57.337Z,1478842077.337 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:27:57.338Z,1478842077.338 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:27:57.724Z,1478842077.724 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:27:57.725Z,1478842077.724 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2016-11-11T05:27:57.725Z,1478842077.725 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T05:27:57.725Z,1478842077.725 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2016-11-11T05:27:57.726Z,1478842077.726 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T05:27:57.726Z,1478842077.726 [DeadReckonWithRespectToWater] No Fault, FailCount= 14
2016-11-11T05:27:57.726Z,1478842077.726 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:27:57.726Z,1478842077.727 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2016-11-11T05:27:57.727Z,1478842077.727 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:27:57.727Z,1478842077.727 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 14
2016-11-11T05:27:58.113Z,1478842078.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:27:58.113Z,1478842078.113 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:27:58.113Z,1478842078.114 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:27:58.114Z,1478842078.114 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T05:27:58.114Z,1478842078.114 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:27:58.115Z,1478842078.115 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:27:58.115Z,1478842078.115 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T05:27:58.116Z,1478842078.116 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:27:58.116Z,1478842078.116 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:27:58.116Z,1478842078.116 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:27:58.117Z,1478842078.117 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:27:58.117Z,1478842078.117 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:27:58.118Z,1478842078.118 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:27:58.118Z,1478842078.118 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:27:58.118Z,1478842078.118 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:27:58.568Z,1478842078.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2016-11-11T05:27:58.569Z,1478842078.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:58.919Z,1478842078.919 [PNI_TCM](ERROR): CRC does not match. Expected:0x12223 got:0x19229
2016-11-11T05:27:58.945Z,1478842078.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T05:27:58.946Z,1478842078.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:59.329Z,1478842079.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T05:27:59.330Z,1478842079.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:27:59.756Z,1478842079.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T05:27:59.757Z,1478842079.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:00.113Z,1478842080.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T05:28:00.114Z,1478842080.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:00.541Z,1478842080.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T05:28:00.542Z,1478842080.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:00.986Z,1478842080.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2016-11-11T05:28:00.987Z,1478842080.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:01.313Z,1478842081.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T05:28:01.315Z,1478842081.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:01.714Z,1478842081.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T05:28:01.715Z,1478842081.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:02.128Z,1478842082.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T05:28:02.129Z,1478842082.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:02.527Z,1478842082.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T05:28:02.528Z,1478842082.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:02.933Z,1478842082.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T05:28:02.934Z,1478842082.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:03.314Z,1478842083.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T05:28:03.315Z,1478842083.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:03.723Z,1478842083.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T05:28:03.724Z,1478842083.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:04.113Z,1478842084.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T05:28:04.114Z,1478842084.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:04.513Z,1478842084.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T05:28:04.514Z,1478842084.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:04.933Z,1478842084.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T05:28:04.934Z,1478842084.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:05.326Z,1478842085.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T05:28:05.327Z,1478842085.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:05.732Z,1478842085.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T05:28:05.733Z,1478842085.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:06.140Z,1478842086.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T05:28:06.142Z,1478842086.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:06.516Z,1478842086.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T05:28:06.517Z,1478842086.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:06.915Z,1478842086.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T05:28:06.916Z,1478842086.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:07.317Z,1478842087.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T05:28:07.318Z,1478842087.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:07.726Z,1478842087.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T05:28:07.727Z,1478842087.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:08.119Z,1478842088.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T05:28:08.120Z,1478842088.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:08.527Z,1478842088.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T05:28:08.528Z,1478842088.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:08.928Z,1478842088.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T05:28:08.929Z,1478842088.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:09.312Z,1478842089.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T05:28:09.313Z,1478842089.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:09.716Z,1478842089.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T05:28:09.717Z,1478842089.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:10.110Z,1478842090.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T05:28:10.112Z,1478842090.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:10.529Z,1478842090.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T05:28:10.530Z,1478842090.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:10.993Z,1478842090.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2016-11-11T05:28:10.994Z,1478842090.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:11.337Z,1478842091.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T05:28:11.338Z,1478842091.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:11.740Z,1478842091.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T05:28:11.741Z,1478842091.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:12.135Z,1478842092.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T05:28:12.136Z,1478842092.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:12.547Z,1478842092.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T05:28:12.548Z,1478842092.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:12.930Z,1478842092.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T05:28:12.932Z,1478842092.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:13.364Z,1478842093.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2016-11-11T05:28:13.365Z,1478842093.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:13.756Z,1478842093.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T05:28:13.757Z,1478842093.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:14.148Z,1478842094.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T05:28:14.149Z,1478842094.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:14.535Z,1478842094.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T05:28:14.540Z,1478842094.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:14.990Z,1478842094.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2016-11-11T05:28:15.015Z,1478842095.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:15.334Z,1478842095.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T05:28:15.335Z,1478842095.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:15.737Z,1478842095.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T05:28:15.738Z,1478842095.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:16.132Z,1478842096.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T05:28:16.133Z,1478842096.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:16.549Z,1478842096.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T05:28:16.550Z,1478842096.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:16.934Z,1478842096.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T05:28:16.935Z,1478842096.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:17.347Z,1478842097.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:17.753Z,1478842097.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:18.133Z,1478842098.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:18.538Z,1478842098.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:18.929Z,1478842098.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:19.346Z,1478842099.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:19.753Z,1478842099.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:20.125Z,1478842100.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:20.546Z,1478842100.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:20.932Z,1478842100.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:21.309Z,1478842101.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:21.718Z,1478842101.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:22.125Z,1478842102.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:22.554Z,1478842102.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:22.932Z,1478842102.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:23.365Z,1478842103.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:23.736Z,1478842103.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:24.130Z,1478842104.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:24.561Z,1478842104.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:24.938Z,1478842104.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:25.325Z,1478842105.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:25.738Z,1478842105.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:26.181Z,1478842106.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:32.844Z,1478842112.844 [BPC1](ERROR): Failed to receive battery data
2016-11-11T05:28:32.844Z,1478842112.844 [BPC1] Communications Fault, FailCount= 1
2016-11-11T05:28:32.844Z,1478842112.844 [BPC1](ERROR): Communications Fault
2016-11-11T05:28:32.852Z,1478842112.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:32.893Z,1478842112.893 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T05:28:32.987Z,1478842112.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:33.353Z,1478842113.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:33.752Z,1478842113.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:33.769Z,1478842113.769 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:28:33.769Z,1478842113.769 [BPC1] No Fault, FailCount= 1
2016-11-11T05:28:34.202Z,1478842114.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:34.587Z,1478842114.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:34.968Z,1478842114.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:35.362Z,1478842115.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:35.759Z,1478842115.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:36.157Z,1478842116.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:36.549Z,1478842116.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:36.957Z,1478842116.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:37.358Z,1478842117.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:37.762Z,1478842117.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:38.169Z,1478842118.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:38.565Z,1478842118.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:38.960Z,1478842118.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:39.360Z,1478842119.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:39.755Z,1478842119.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:40.158Z,1478842120.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:40.563Z,1478842120.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:40.964Z,1478842120.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:41.362Z,1478842121.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:41.760Z,1478842121.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:42.161Z,1478842122.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:42.554Z,1478842122.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:42.960Z,1478842122.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:43.358Z,1478842123.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:43.763Z,1478842123.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:44.173Z,1478842124.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:44.565Z,1478842124.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:44.997Z,1478842124.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:45.360Z,1478842125.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:45.758Z,1478842125.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:46.164Z,1478842126.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:46.564Z,1478842126.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:46.973Z,1478842126.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:47.374Z,1478842127.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:47.767Z,1478842127.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:48.142Z,1478842128.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:48.541Z,1478842128.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:48.950Z,1478842128.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:49.349Z,1478842129.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:49.753Z,1478842129.753 [BPC1](ERROR): Failed to receive battery data
2016-11-11T05:28:49.753Z,1478842129.753 [BPC1] Communications Fault, FailCount= 2
2016-11-11T05:28:49.753Z,1478842129.753 [BPC1](ERROR): Communications Fault
2016-11-11T05:28:49.781Z,1478842129.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:49.817Z,1478842129.817 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T05:28:50.161Z,1478842130.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:50.556Z,1478842130.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:50.957Z,1478842130.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:50.982Z,1478842130.982 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:28:50.982Z,1478842130.982 [BPC1] No Fault, FailCount= 2
2016-11-11T05:28:51.410Z,1478842131.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:51.788Z,1478842131.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:52.153Z,1478842132.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:52.569Z,1478842132.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:52.973Z,1478842132.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:53.369Z,1478842133.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:53.759Z,1478842133.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:54.151Z,1478842134.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:54.558Z,1478842134.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:54.960Z,1478842134.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:55.354Z,1478842135.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:55.767Z,1478842135.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:56.163Z,1478842136.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:56.563Z,1478842136.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:56.962Z,1478842136.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:57.379Z,1478842137.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:57.761Z,1478842137.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:58.162Z,1478842138.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:58.578Z,1478842138.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:58.956Z,1478842138.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:59.356Z,1478842139.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:28:59.749Z,1478842139.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:00.156Z,1478842140.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:00.550Z,1478842140.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:00.953Z,1478842140.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:01.357Z,1478842141.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:01.758Z,1478842141.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:02.229Z,1478842142.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:02.573Z,1478842142.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:02.989Z,1478842142.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:03.344Z,1478842143.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:03.778Z,1478842143.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:04.149Z,1478842144.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:04.590Z,1478842144.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:04.974Z,1478842144.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:05.356Z,1478842145.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:05.751Z,1478842145.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:06.194Z,1478842146.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:06.561Z,1478842146.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:06.957Z,1478842146.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:07.355Z,1478842147.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:07.766Z,1478842147.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:08.169Z,1478842148.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:08.568Z,1478842148.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:08.953Z,1478842148.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:09.365Z,1478842149.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:09.742Z,1478842149.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:10.141Z,1478842150.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:10.576Z,1478842150.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:10.972Z,1478842150.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:11.355Z,1478842151.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:11.756Z,1478842151.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:12.156Z,1478842152.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:12.559Z,1478842152.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:12.957Z,1478842152.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:13.360Z,1478842153.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:13.761Z,1478842153.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:14.161Z,1478842154.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:14.562Z,1478842154.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:14.973Z,1478842154.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:15.361Z,1478842155.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:15.789Z,1478842155.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:16.157Z,1478842156.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:16.595Z,1478842156.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:16.965Z,1478842156.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:17.400Z,1478842157.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:17.765Z,1478842157.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:18.173Z,1478842158.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:18.557Z,1478842158.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:18.942Z,1478842158.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:19.342Z,1478842159.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:19.771Z,1478842159.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:20.154Z,1478842160.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:20.552Z,1478842160.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:20.945Z,1478842160.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:21.353Z,1478842161.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:21.746Z,1478842161.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:22.146Z,1478842162.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:22.561Z,1478842162.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:22.956Z,1478842162.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:23.356Z,1478842163.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:23.754Z,1478842163.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:24.150Z,1478842164.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:24.553Z,1478842164.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:24.961Z,1478842164.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:25.352Z,1478842165.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:25.765Z,1478842165.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:26.167Z,1478842166.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:29.477Z,1478842169.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:29.600Z,1478842169.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:29.973Z,1478842169.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:30.409Z,1478842170.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:30.767Z,1478842170.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:31.205Z,1478842171.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:31.613Z,1478842171.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:31.978Z,1478842171.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:32.383Z,1478842172.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:32.771Z,1478842172.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:33.170Z,1478842173.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:33.572Z,1478842173.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:33.969Z,1478842173.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:34.369Z,1478842174.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:34.780Z,1478842174.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:35.180Z,1478842175.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:35.579Z,1478842175.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:35.971Z,1478842175.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:36.367Z,1478842176.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:36.768Z,1478842176.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:37.176Z,1478842177.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:37.580Z,1478842177.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:37.979Z,1478842177.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:38.389Z,1478842178.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:38.770Z,1478842178.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:39.180Z,1478842179.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:39.577Z,1478842179.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:39.958Z,1478842179.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:40.357Z,1478842180.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:40.791Z,1478842180.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:41.184Z,1478842181.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:41.564Z,1478842181.565 [BPC1](ERROR): Failed to parse message.
2016-11-11T05:29:41.565Z,1478842181.565 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T05:29:41.565Z,1478842181.565 [BPC1] Data Fault, FailCount= 1
2016-11-11T05:29:41.565Z,1478842181.565 [BPC1](ERROR): Data Fault
2016-11-11T05:29:41.573Z,1478842181.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:41.631Z,1478842181.631 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:29:41.968Z,1478842181.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:42.373Z,1478842182.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:42.766Z,1478842182.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:42.784Z,1478842182.784 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:29:42.784Z,1478842182.784 [BPC1] No Fault, FailCount= 1
2016-11-11T05:29:43.222Z,1478842183.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:43.617Z,1478842183.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:43.978Z,1478842183.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:44.388Z,1478842184.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:44.778Z,1478842184.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:45.173Z,1478842185.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:45.577Z,1478842185.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:45.966Z,1478842185.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:46.357Z,1478842186.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:46.784Z,1478842186.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:47.182Z,1478842187.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:47.582Z,1478842187.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:47.985Z,1478842187.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:48.358Z,1478842188.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:48.763Z,1478842188.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:49.165Z,1478842189.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:49.572Z,1478842189.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:49.977Z,1478842189.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:50.381Z,1478842190.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:50.772Z,1478842190.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:51.166Z,1478842191.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:51.567Z,1478842191.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:51.978Z,1478842191.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:52.366Z,1478842192.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:52.784Z,1478842192.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:53.179Z,1478842193.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:53.579Z,1478842193.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:54.002Z,1478842194.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:54.370Z,1478842194.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:54.789Z,1478842194.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:55.157Z,1478842195.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:55.609Z,1478842195.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:55.992Z,1478842195.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:56.409Z,1478842196.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:56.796Z,1478842196.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:57.164Z,1478842197.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:57.565Z,1478842197.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:57.965Z,1478842197.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:58.363Z,1478842198.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:58.776Z,1478842198.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:59.171Z,1478842199.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:59.578Z,1478842199.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:29:59.973Z,1478842199.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:00.377Z,1478842200.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:00.765Z,1478842200.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:01.176Z,1478842201.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:01.589Z,1478842201.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:01.986Z,1478842201.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:02.382Z,1478842202.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:02.774Z,1478842202.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:03.173Z,1478842203.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:03.558Z,1478842203.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:03.958Z,1478842203.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:04.362Z,1478842204.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:04.796Z,1478842204.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:05.172Z,1478842205.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:05.572Z,1478842205.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:05.962Z,1478842205.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:06.372Z,1478842206.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:06.776Z,1478842206.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:07.217Z,1478842207.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:07.592Z,1478842207.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:08.018Z,1478842208.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:08.388Z,1478842208.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:08.789Z,1478842208.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:09.169Z,1478842209.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:09.597Z,1478842209.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:09.957Z,1478842209.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:10.383Z,1478842210.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:10.784Z,1478842210.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:11.192Z,1478842211.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:11.558Z,1478842211.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:11.961Z,1478842211.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:12.392Z,1478842212.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:12.771Z,1478842212.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:13.177Z,1478842213.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:13.572Z,1478842213.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:13.969Z,1478842213.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:14.377Z,1478842214.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:14.777Z,1478842214.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:15.173Z,1478842215.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:15.566Z,1478842215.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:15.967Z,1478842215.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:16.382Z,1478842216.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:16.778Z,1478842216.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:17.180Z,1478842217.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:17.565Z,1478842217.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:17.971Z,1478842217.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:18.381Z,1478842218.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:18.778Z,1478842218.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:19.178Z,1478842219.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:19.578Z,1478842219.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:19.969Z,1478842219.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:20.433Z,1478842220.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:20.790Z,1478842220.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:21.213Z,1478842221.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:21.591Z,1478842221.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:22.001Z,1478842222.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:22.401Z,1478842222.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:22.786Z,1478842222.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:23.188Z,1478842223.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:23.561Z,1478842223.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:23.965Z,1478842223.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:24.372Z,1478842224.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:24.771Z,1478842224.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:25.177Z,1478842225.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:25.565Z,1478842225.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:25.964Z,1478842225.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:26.377Z,1478842226.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:29.657Z,1478842229.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:29.674Z,1478842229.674 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T05:30:29.674Z,1478842229.674 [Rowe_600LCM] No Fault, FailCount= 5
2016-11-11T05:30:29.833Z,1478842229.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:30.055Z,1478842230.055 [Rowe_600LCM](INFO): Initializing
2016-11-11T05:30:30.056Z,1478842230.056 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T05:30:30.056Z,1478842230.056 [Rowe_600LCM](INFO): LCM OK
2016-11-11T05:30:30.056Z,1478842230.056 [Rowe_600LCM](INFO): Powering up
2016-11-11T05:30:30.151Z,1478842230.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:30.531Z,1478842230.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:30.925Z,1478842230.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:31.341Z,1478842231.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:31.737Z,1478842231.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:32.168Z,1478842232.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:32.535Z,1478842232.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:32.969Z,1478842232.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:33.389Z,1478842233.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:33.753Z,1478842233.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:34.169Z,1478842234.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:34.310Z,1478842234.310 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T05:30:34.370Z,1478842234.371 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T05:30:34.372Z,1478842234.372 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T05:30:34.373Z,1478842234.374 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T05:30:34.376Z,1478842234.376 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T05:30:34.568Z,1478842234.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:34.930Z,1478842234.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:35.362Z,1478842235.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:35.765Z,1478842235.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:36.141Z,1478842236.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:36.540Z,1478842236.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:36.929Z,1478842236.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:37.334Z,1478842237.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:37.741Z,1478842237.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:38.128Z,1478842238.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:38.541Z,1478842238.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:38.937Z,1478842238.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:39.337Z,1478842239.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:39.733Z,1478842239.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:40.132Z,1478842240.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:40.532Z,1478842240.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:40.930Z,1478842240.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:41.370Z,1478842241.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:41.743Z,1478842241.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:42.152Z,1478842242.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:42.554Z,1478842242.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:42.938Z,1478842242.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:43.340Z,1478842243.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:43.723Z,1478842243.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:44.177Z,1478842244.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:44.535Z,1478842244.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:44.956Z,1478842244.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:45.336Z,1478842245.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:45.736Z,1478842245.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:46.190Z,1478842246.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:46.539Z,1478842246.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:46.949Z,1478842246.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:47.331Z,1478842247.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:47.781Z,1478842247.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:48.174Z,1478842248.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:48.600Z,1478842248.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:48.929Z,1478842248.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:49.354Z,1478842249.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:49.763Z,1478842249.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:50.205Z,1478842250.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:50.540Z,1478842250.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:50.936Z,1478842250.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:51.337Z,1478842251.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:51.729Z,1478842251.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:52.179Z,1478842252.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:52.536Z,1478842252.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:52.937Z,1478842252.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:53.335Z,1478842253.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:53.741Z,1478842253.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:54.197Z,1478842254.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:54.545Z,1478842254.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:54.929Z,1478842254.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:55.339Z,1478842255.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:55.734Z,1478842255.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:56.133Z,1478842256.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:56.558Z,1478842256.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:56.952Z,1478842256.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:57.343Z,1478842257.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:57.746Z,1478842257.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:58.133Z,1478842258.133 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:58.133Z,1478842258.133 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2016-11-11T05:30:58.133Z,1478842258.133 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:30:58.140Z,1478842258.140 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:58.140Z,1478842258.140 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2016-11-11T05:30:58.140Z,1478842258.140 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T05:30:58.142Z,1478842258.142 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:58.142Z,1478842258.142 [DeadReckonWithRespectToWater] Software Fault, FailCount= 15
2016-11-11T05:30:58.142Z,1478842258.142 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T05:30:58.148Z,1478842258.148 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:58.149Z,1478842258.149 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2016-11-11T05:30:58.149Z,1478842258.149 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:30:58.151Z,1478842258.151 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:58.151Z,1478842258.151 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 15
2016-11-11T05:30:58.151Z,1478842258.151 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:30:58.193Z,1478842258.193 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:30:58.193Z,1478842258.193 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T05:30:58.194Z,1478842258.194 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T05:30:58.194Z,1478842258.194 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:30:58.194Z,1478842258.194 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:30:58.590Z,1478842258.590 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:30:58.590Z,1478842258.590 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2016-11-11T05:30:58.590Z,1478842258.591 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T05:30:58.591Z,1478842258.591 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2016-11-11T05:30:58.595Z,1478842258.595 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T05:30:58.595Z,1478842258.595 [DeadReckonWithRespectToWater] No Fault, FailCount= 15
2016-11-11T05:30:58.596Z,1478842258.596 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:30:58.596Z,1478842258.596 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2016-11-11T05:30:58.597Z,1478842258.597 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:30:58.597Z,1478842258.597 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 15
2016-11-11T05:30:58.938Z,1478842258.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:30:58.939Z,1478842258.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:30:58.939Z,1478842258.940 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:30:58.940Z,1478842258.940 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T05:30:58.940Z,1478842258.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:30:58.941Z,1478842258.941 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:30:58.941Z,1478842258.941 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T05:30:58.942Z,1478842258.942 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:30:58.942Z,1478842258.942 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:30:58.942Z,1478842258.942 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:30:58.943Z,1478842258.943 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:30:58.943Z,1478842258.943 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:30:58.944Z,1478842258.944 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:30:58.944Z,1478842258.944 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:30:58.944Z,1478842258.944 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:30:59.346Z,1478842259.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:30:59.743Z,1478842259.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:00.184Z,1478842260.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:00.551Z,1478842260.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:00.939Z,1478842260.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:01.338Z,1478842261.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:01.765Z,1478842261.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:02.172Z,1478842262.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:02.566Z,1478842262.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:02.952Z,1478842262.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:03.369Z,1478842263.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:03.761Z,1478842263.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:04.152Z,1478842264.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:04.532Z,1478842264.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:04.929Z,1478842264.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:05.337Z,1478842265.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:05.741Z,1478842265.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:06.182Z,1478842266.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:06.565Z,1478842266.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:06.925Z,1478842266.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:07.325Z,1478842267.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:07.730Z,1478842267.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:08.178Z,1478842268.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:08.541Z,1478842268.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:08.937Z,1478842268.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:09.342Z,1478842269.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:09.739Z,1478842269.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:10.138Z,1478842270.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:10.546Z,1478842270.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:10.941Z,1478842270.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:11.340Z,1478842271.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:11.744Z,1478842271.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:12.153Z,1478842272.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:12.547Z,1478842272.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:12.937Z,1478842272.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:13.348Z,1478842273.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:13.723Z,1478842273.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:14.154Z,1478842274.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:14.568Z,1478842274.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:14.953Z,1478842274.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:15.353Z,1478842275.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:15.758Z,1478842275.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:16.149Z,1478842276.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:16.577Z,1478842276.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:16.932Z,1478842276.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:17.357Z,1478842277.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:17.780Z,1478842277.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:18.157Z,1478842278.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:18.544Z,1478842278.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:18.929Z,1478842278.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:19.340Z,1478842279.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:19.738Z,1478842279.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:20.154Z,1478842280.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:20.542Z,1478842280.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:20.943Z,1478842280.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:21.342Z,1478842281.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:21.740Z,1478842281.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:22.181Z,1478842282.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:22.553Z,1478842282.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:22.928Z,1478842282.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:23.324Z,1478842283.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:23.739Z,1478842283.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:24.134Z,1478842284.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:24.549Z,1478842284.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:24.864Z,1478842284.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:31:24.933Z,1478842284.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:25.333Z,1478842285.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:25.660Z,1478842285.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:31:25.734Z,1478842285.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:26.133Z,1478842286.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:26.550Z,1478842286.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:29.953Z,1478842289.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:30.133Z,1478842290.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:30.470Z,1478842290.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:30.849Z,1478842290.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:31.279Z,1478842291.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:31.647Z,1478842291.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:32.133Z,1478842292.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:32.462Z,1478842292.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:32.873Z,1478842292.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:33.269Z,1478842293.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:33.653Z,1478842293.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:34.103Z,1478842294.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:34.438Z,1478842294.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:34.846Z,1478842294.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:35.245Z,1478842295.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:35.651Z,1478842295.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:36.051Z,1478842296.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:36.470Z,1478842296.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:36.853Z,1478842296.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:37.252Z,1478842297.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:37.657Z,1478842297.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:38.057Z,1478842298.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:38.482Z,1478842298.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:38.863Z,1478842298.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:39.264Z,1478842299.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:39.649Z,1478842299.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:40.041Z,1478842300.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:40.477Z,1478842300.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:40.850Z,1478842300.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:41.241Z,1478842301.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:41.675Z,1478842301.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:42.114Z,1478842302.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:42.451Z,1478842302.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:42.857Z,1478842302.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:43.249Z,1478842303.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:43.649Z,1478842303.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:44.171Z,1478842304.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:44.462Z,1478842304.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:44.897Z,1478842304.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:45.268Z,1478842305.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:45.669Z,1478842305.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:46.126Z,1478842306.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:46.442Z,1478842306.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:46.856Z,1478842306.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:47.256Z,1478842307.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:47.659Z,1478842307.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:48.114Z,1478842308.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:48.465Z,1478842308.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:48.849Z,1478842308.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:49.237Z,1478842309.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:49.637Z,1478842309.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:50.037Z,1478842310.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:50.457Z,1478842310.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:50.858Z,1478842310.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:51.260Z,1478842311.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:51.651Z,1478842311.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:52.055Z,1478842312.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:52.470Z,1478842312.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:52.857Z,1478842312.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:53.253Z,1478842313.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:53.659Z,1478842313.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:54.066Z,1478842314.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:54.464Z,1478842314.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:54.858Z,1478842314.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:55.237Z,1478842315.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:55.645Z,1478842315.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:56.082Z,1478842316.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:56.463Z,1478842316.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:56.863Z,1478842316.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:57.272Z,1478842317.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:57.681Z,1478842317.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:58.100Z,1478842318.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:58.445Z,1478842318.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:58.885Z,1478842318.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:59.253Z,1478842319.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:31:59.693Z,1478842319.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:00.103Z,1478842320.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:00.489Z,1478842320.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:00.857Z,1478842320.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:01.246Z,1478842321.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:01.656Z,1478842321.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:02.097Z,1478842322.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:02.469Z,1478842322.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:02.865Z,1478842322.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:03.261Z,1478842323.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:03.641Z,1478842323.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:04.105Z,1478842324.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:04.448Z,1478842324.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:04.854Z,1478842324.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:05.246Z,1478842325.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:05.668Z,1478842325.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:06.060Z,1478842326.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:06.468Z,1478842326.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:06.856Z,1478842326.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:07.256Z,1478842327.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:07.653Z,1478842327.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:08.057Z,1478842328.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:08.476Z,1478842328.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:08.867Z,1478842328.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:09.274Z,1478842329.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:09.638Z,1478842329.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:10.080Z,1478842330.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:10.462Z,1478842330.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:10.859Z,1478842330.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:11.258Z,1478842331.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:11.658Z,1478842331.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:12.089Z,1478842332.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:12.517Z,1478842332.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:12.861Z,1478842332.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:13.270Z,1478842333.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:13.657Z,1478842333.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:14.107Z,1478842334.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:14.495Z,1478842334.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:14.862Z,1478842334.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:15.275Z,1478842335.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:15.657Z,1478842335.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:16.067Z,1478842336.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:16.445Z,1478842336.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:16.838Z,1478842336.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:17.241Z,1478842337.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:17.729Z,1478842337.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:18.106Z,1478842338.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:18.477Z,1478842338.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:18.849Z,1478842338.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:19.245Z,1478842339.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:19.646Z,1478842339.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:20.047Z,1478842340.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:20.454Z,1478842340.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:20.854Z,1478842340.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:21.276Z,1478842341.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:21.646Z,1478842341.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:22.053Z,1478842342.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:22.451Z,1478842342.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:22.858Z,1478842342.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:23.265Z,1478842343.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:23.673Z,1478842343.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:24.079Z,1478842344.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:24.462Z,1478842344.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:24.863Z,1478842344.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:25.254Z,1478842345.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:25.661Z,1478842345.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:25.680Z,1478842345.680 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T05:32:25.680Z,1478842345.680 [Default:CheckIn:C.Wait] Stopped
2016-11-11T05:32:25.680Z,1478842345.680 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T05:32:25.680Z,1478842345.681 [Default:CheckIn:D] Running Loop=1
2016-11-11T05:32:26.072Z,1478842346.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:26.085Z,1478842346.085 [Default:CheckIn:D] Stopped
2016-11-11T05:32:26.085Z,1478842346.085 [Default:CheckIn:E] Running Loop=1
2016-11-11T05:32:26.497Z,1478842346.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:26.503Z,1478842346.503 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 42.412907 min 
2016-11-11T05:32:26.519Z,1478842346.519 [Default:CheckIn:E] Stopped
2016-11-11T05:32:26.519Z,1478842346.519 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T05:32:26.519Z,1478842346.519 [Default:CheckIn] Stopped
2016-11-11T05:32:26.520Z,1478842346.520 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T05:32:26.520Z,1478842346.520 [Default:CheckIn](INFO): Running loop #5
2016-11-11T05:32:26.520Z,1478842346.520 [Default:CheckIn] Running Loop=5
2016-11-11T05:32:26.520Z,1478842346.520 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T05:32:26.520Z,1478842346.520 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T05:32:26.901Z,1478842346.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:30.284Z,1478842350.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:30.430Z,1478842350.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:30.778Z,1478842350.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:31.157Z,1478842351.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:31.582Z,1478842351.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:31.957Z,1478842351.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:32.399Z,1478842352.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:32.766Z,1478842352.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:33.166Z,1478842353.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:33.276Z,1478842353.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:32:33.564Z,1478842353.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:33.954Z,1478842353.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:34.072Z,1478842354.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:32:34.415Z,1478842354.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:34.766Z,1478842354.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:35.157Z,1478842355.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:35.567Z,1478842355.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:35.970Z,1478842355.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:36.409Z,1478842356.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:36.746Z,1478842356.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:37.153Z,1478842357.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:37.545Z,1478842357.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:38.031Z,1478842358.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:38.372Z,1478842358.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:38.760Z,1478842358.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:39.165Z,1478842359.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:39.550Z,1478842359.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:40.007Z,1478842360.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:40.354Z,1478842360.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:40.758Z,1478842360.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:41.158Z,1478842361.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:41.574Z,1478842361.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:42.012Z,1478842362.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:42.377Z,1478842362.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:42.752Z,1478842362.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:43.153Z,1478842363.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:43.546Z,1478842363.546 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T05:32:43.547Z,1478842363.546 [BPC1] Data Fault, FailCount= 1
2016-11-11T05:32:43.547Z,1478842363.547 [BPC1](ERROR): Data Fault
2016-11-11T05:32:43.555Z,1478842363.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:43.581Z,1478842363.581 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:32:44.030Z,1478842364.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:44.367Z,1478842364.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:44.766Z,1478842364.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:44.784Z,1478842364.784 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:32:44.784Z,1478842364.784 [BPC1] No Fault, FailCount= 1
2016-11-11T05:32:45.232Z,1478842365.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:45.570Z,1478842365.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:45.986Z,1478842365.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:46.349Z,1478842366.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:46.753Z,1478842366.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:47.157Z,1478842367.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:47.559Z,1478842367.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:47.959Z,1478842367.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:48.389Z,1478842368.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:48.754Z,1478842368.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:49.157Z,1478842369.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:49.554Z,1478842369.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:49.957Z,1478842369.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:50.399Z,1478842370.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:50.766Z,1478842370.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:51.166Z,1478842371.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:51.564Z,1478842371.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:52.004Z,1478842372.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:52.357Z,1478842372.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:52.769Z,1478842372.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:53.149Z,1478842373.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:53.571Z,1478842373.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:54.020Z,1478842374.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:54.376Z,1478842374.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:54.758Z,1478842374.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:55.153Z,1478842375.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:55.560Z,1478842375.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:55.000Z,1478842376.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:56.365Z,1478842376.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:56.765Z,1478842376.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:57.165Z,1478842377.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:57.598Z,1478842377.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:58.045Z,1478842378.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:58.357Z,1478842378.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:58.782Z,1478842378.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:59.145Z,1478842379.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:32:59.617Z,1478842379.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:00.033Z,1478842380.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:00.385Z,1478842380.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:00.752Z,1478842380.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:01.149Z,1478842381.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:01.554Z,1478842381.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:01.957Z,1478842381.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:02.359Z,1478842382.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:02.759Z,1478842382.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:03.163Z,1478842383.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:03.557Z,1478842383.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:03.954Z,1478842383.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:04.360Z,1478842384.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:04.765Z,1478842384.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:05.154Z,1478842385.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:05.570Z,1478842385.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:06.005Z,1478842386.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:06.368Z,1478842386.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:06.761Z,1478842386.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:07.149Z,1478842387.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:07.549Z,1478842387.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:07.985Z,1478842387.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:08.406Z,1478842388.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:08.810Z,1478842388.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:09.178Z,1478842389.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:09.571Z,1478842389.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:09.992Z,1478842389.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:10.360Z,1478842390.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:10.762Z,1478842390.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:11.192Z,1478842391.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:11.630Z,1478842391.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:12.029Z,1478842392.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:12.417Z,1478842392.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:12.818Z,1478842392.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:13.177Z,1478842393.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:13.615Z,1478842393.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:14.054Z,1478842394.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:14.414Z,1478842394.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:14.804Z,1478842394.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:15.174Z,1478842395.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:15.579Z,1478842395.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:15.955Z,1478842395.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:16.382Z,1478842396.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:16.796Z,1478842396.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:17.146Z,1478842397.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:17.597Z,1478842397.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:18.004Z,1478842398.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:18.386Z,1478842398.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:18.783Z,1478842398.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:19.163Z,1478842399.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:19.584Z,1478842399.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:19.974Z,1478842399.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:20.401Z,1478842400.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:20.774Z,1478842400.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:21.196Z,1478842401.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:21.589Z,1478842401.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:21.000Z,1478842402.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:22.405Z,1478842402.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:22.774Z,1478842402.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:23.163Z,1478842403.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:23.614Z,1478842403.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:23.982Z,1478842403.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:24.402Z,1478842404.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:24.778Z,1478842404.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:25.205Z,1478842405.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:25.568Z,1478842405.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:26.010Z,1478842406.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:26.413Z,1478842406.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:26.776Z,1478842406.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:27.224Z,1478842407.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:30.592Z,1478842410.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:30.745Z,1478842410.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:31.133Z,1478842411.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:31.504Z,1478842411.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:31.909Z,1478842411.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:32.326Z,1478842412.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:32.709Z,1478842412.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:33.094Z,1478842413.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:33.494Z,1478842413.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:33.928Z,1478842413.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:34.318Z,1478842414.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:34.713Z,1478842414.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:35.117Z,1478842415.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:35.486Z,1478842415.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:35.933Z,1478842415.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:36.301Z,1478842416.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:36.694Z,1478842416.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:37.113Z,1478842417.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:37.508Z,1478842417.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:37.938Z,1478842417.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:38.305Z,1478842418.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:38.709Z,1478842418.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:39.090Z,1478842419.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:39.486Z,1478842419.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:39.935Z,1478842419.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:40.324Z,1478842420.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:40.721Z,1478842420.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:41.105Z,1478842421.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:41.494Z,1478842421.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:41.948Z,1478842421.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:42.295Z,1478842422.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:42.720Z,1478842422.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:43.149Z,1478842423.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:43.507Z,1478842423.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:43.937Z,1478842423.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:44.301Z,1478842424.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:44.710Z,1478842424.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:45.090Z,1478842425.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:45.517Z,1478842425.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:45.889Z,1478842425.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:46.305Z,1478842426.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:46.709Z,1478842426.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:47.100Z,1478842427.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:47.490Z,1478842427.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:47.906Z,1478842427.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:48.290Z,1478842428.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:48.687Z,1478842428.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:49.105Z,1478842429.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:49.504Z,1478842429.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:49.905Z,1478842429.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:50.290Z,1478842430.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:50.693Z,1478842430.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:51.087Z,1478842431.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:51.491Z,1478842431.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:51.896Z,1478842431.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:52.305Z,1478842432.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:52.712Z,1478842432.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:53.108Z,1478842433.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:53.490Z,1478842433.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:53.930Z,1478842433.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:54.287Z,1478842434.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:54.690Z,1478842434.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:55.105Z,1478842435.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:55.503Z,1478842435.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:55.914Z,1478842435.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:56.289Z,1478842436.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:56.679Z,1478842436.679 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T05:33:56.679Z,1478842436.679 [BPC1] Data Fault, FailCount= 1
2016-11-11T05:33:56.679Z,1478842436.679 [BPC1](ERROR): Data Fault
2016-11-11T05:33:56.687Z,1478842436.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:56.703Z,1478842436.703 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:33:57.090Z,1478842437.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:57.506Z,1478842437.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:57.889Z,1478842437.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:57.905Z,1478842437.905 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:33:57.905Z,1478842437.905 [BPC1] No Fault, FailCount= 1
2016-11-11T05:33:58.350Z,1478842438.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:58.726Z,1478842438.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:59.108Z,1478842439.108 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:59.108Z,1478842439.108 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2016-11-11T05:33:59.108Z,1478842439.108 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:33:59.110Z,1478842439.110 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:59.110Z,1478842439.110 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2016-11-11T05:33:59.110Z,1478842439.110 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T05:33:59.112Z,1478842439.112 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:59.113Z,1478842439.113 [DeadReckonWithRespectToWater] Software Fault, FailCount= 16
2016-11-11T05:33:59.113Z,1478842439.113 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T05:33:59.115Z,1478842439.115 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:59.115Z,1478842439.115 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2016-11-11T05:33:59.115Z,1478842439.115 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:33:59.117Z,1478842439.117 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:33:59.117Z,1478842439.117 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 16
2016-11-11T05:33:59.117Z,1478842439.117 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:33:59.131Z,1478842439.131 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:33:59.131Z,1478842439.131 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T05:33:59.131Z,1478842439.131 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T05:33:59.132Z,1478842439.132 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:33:59.132Z,1478842439.132 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:33:59.497Z,1478842439.497 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:33:59.497Z,1478842439.497 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2016-11-11T05:33:59.498Z,1478842439.498 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T05:33:59.498Z,1478842439.498 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2016-11-11T05:33:59.499Z,1478842439.499 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T05:33:59.499Z,1478842439.499 [DeadReckonWithRespectToWater] No Fault, FailCount= 16
2016-11-11T05:33:59.499Z,1478842439.499 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:33:59.500Z,1478842439.500 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2016-11-11T05:33:59.500Z,1478842439.500 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:33:59.500Z,1478842439.500 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 16
2016-11-11T05:33:59.887Z,1478842439.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:33:59.888Z,1478842439.888 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:33:59.888Z,1478842439.888 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:33:59.888Z,1478842439.888 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T05:33:59.889Z,1478842439.889 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:33:59.889Z,1478842439.889 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:33:59.890Z,1478842439.890 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T05:33:59.890Z,1478842439.890 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:33:59.890Z,1478842439.890 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:33:59.891Z,1478842439.891 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:33:59.891Z,1478842439.891 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:33:59.891Z,1478842439.891 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:33:59.892Z,1478842439.892 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:33:59.892Z,1478842439.892 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:33:59.893Z,1478842439.893 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:34:00.286Z,1478842440.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:00.689Z,1478842440.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:01.103Z,1478842441.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:01.503Z,1478842441.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:01.905Z,1478842441.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:02.290Z,1478842442.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:02.708Z,1478842442.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:03.089Z,1478842443.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:03.489Z,1478842443.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:03.892Z,1478842443.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:04.304Z,1478842444.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:04.705Z,1478842444.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:05.110Z,1478842445.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:05.486Z,1478842445.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:05.890Z,1478842445.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:06.341Z,1478842446.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:06.721Z,1478842446.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:07.112Z,1478842447.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:07.530Z,1478842447.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:07.918Z,1478842447.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:08.300Z,1478842448.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:08.701Z,1478842448.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:09.090Z,1478842449.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:09.486Z,1478842449.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:09.914Z,1478842449.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:10.307Z,1478842450.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:10.757Z,1478842450.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:11.129Z,1478842451.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:11.521Z,1478842451.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:11.899Z,1478842451.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:12.341Z,1478842452.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:12.729Z,1478842452.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:13.122Z,1478842453.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:13.505Z,1478842453.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:13.922Z,1478842453.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:14.303Z,1478842454.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:14.701Z,1478842454.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:15.099Z,1478842455.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:15.505Z,1478842455.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:15.904Z,1478842455.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:16.303Z,1478842456.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:16.704Z,1478842456.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:17.138Z,1478842457.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:17.505Z,1478842457.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:17.902Z,1478842457.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:18.302Z,1478842458.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:18.707Z,1478842458.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:19.113Z,1478842459.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:19.512Z,1478842459.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:19.915Z,1478842459.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:20.306Z,1478842460.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:20.709Z,1478842460.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:21.108Z,1478842461.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:21.496Z,1478842461.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:21.935Z,1478842461.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:22.301Z,1478842462.301 [PNI_TCM](ERROR): CRC does not match. Expected:0x46879 got:0x2105
2016-11-11T05:34:22.332Z,1478842462.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:22.717Z,1478842462.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:23.120Z,1478842463.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:23.505Z,1478842463.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:23.936Z,1478842463.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:24.302Z,1478842464.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:24.745Z,1478842464.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:25.107Z,1478842465.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:25.550Z,1478842465.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:25.910Z,1478842465.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:26.337Z,1478842466.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:26.737Z,1478842466.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:27.101Z,1478842467.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:27.512Z,1478842467.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:30.932Z,1478842470.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:31.069Z,1478842471.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:31.466Z,1478842471.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:31.859Z,1478842471.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:34:31.882Z,1478842471.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:32.226Z,1478842472.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:34:32.260Z,1478842472.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:32.620Z,1478842472.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:34:32.650Z,1478842472.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:33.041Z,1478842473.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:33.457Z,1478842473.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:33.855Z,1478842473.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:34.261Z,1478842474.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:34.691Z,1478842474.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:35.057Z,1478842475.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:35.450Z,1478842475.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:35.857Z,1478842475.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:36.257Z,1478842476.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:36.649Z,1478842476.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:37.059Z,1478842477.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:37.465Z,1478842477.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:37.898Z,1478842477.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:38.267Z,1478842478.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:38.705Z,1478842478.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:39.059Z,1478842479.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:39.477Z,1478842479.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:39.851Z,1478842479.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:40.294Z,1478842480.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:40.687Z,1478842480.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:41.077Z,1478842481.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:41.448Z,1478842481.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:41.853Z,1478842481.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:42.255Z,1478842482.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:42.658Z,1478842482.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:43.059Z,1478842483.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:43.458Z,1478842483.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:43.858Z,1478842483.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:44.269Z,1478842484.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:44.647Z,1478842484.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:45.062Z,1478842485.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:45.451Z,1478842485.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:45.846Z,1478842485.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:46.270Z,1478842486.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:46.665Z,1478842486.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:47.069Z,1478842487.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:47.466Z,1478842487.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:47.834Z,1478842487.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:48.250Z,1478842488.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:48.646Z,1478842488.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:49.070Z,1478842489.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:49.465Z,1478842489.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:49.857Z,1478842489.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:50.256Z,1478842490.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:50.658Z,1478842490.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:51.047Z,1478842491.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:51.448Z,1478842491.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:51.873Z,1478842491.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:52.262Z,1478842492.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:52.697Z,1478842492.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:53.085Z,1478842493.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:53.448Z,1478842493.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:53.861Z,1478842493.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:54.308Z,1478842494.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:54.640Z,1478842494.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:55.085Z,1478842495.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:55.486Z,1478842495.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:55.841Z,1478842495.842 [PNI_TCM](ERROR): CRC does not match. Expected:0x44781 got:0x4385
2016-11-11T05:34:55.873Z,1478842495.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:56.263Z,1478842496.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:56.639Z,1478842496.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:57.065Z,1478842497.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:57.445Z,1478842497.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:57.849Z,1478842497.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:58.248Z,1478842498.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:58.651Z,1478842498.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:59.057Z,1478842499.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:59.451Z,1478842499.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:34:59.844Z,1478842499.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:00.255Z,1478842500.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:00.650Z,1478842500.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:01.065Z,1478842501.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:01.455Z,1478842501.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:01.869Z,1478842501.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:02.255Z,1478842502.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:02.646Z,1478842502.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:03.053Z,1478842503.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:03.459Z,1478842503.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:03.846Z,1478842503.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:04.273Z,1478842504.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:04.664Z,1478842504.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:05.073Z,1478842505.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:05.457Z,1478842505.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:05.858Z,1478842505.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:06.250Z,1478842506.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:06.652Z,1478842506.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:07.059Z,1478842507.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:07.513Z,1478842507.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:07.864Z,1478842507.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:08.285Z,1478842508.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:08.638Z,1478842508.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:09.075Z,1478842509.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:09.478Z,1478842509.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:09.842Z,1478842509.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:10.268Z,1478842510.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:10.649Z,1478842510.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:11.057Z,1478842511.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:11.449Z,1478842511.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:11.843Z,1478842511.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:12.249Z,1478842512.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:12.649Z,1478842512.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:13.060Z,1478842513.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:13.456Z,1478842513.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:13.855Z,1478842513.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:14.242Z,1478842514.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:14.654Z,1478842514.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:15.053Z,1478842515.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:15.444Z,1478842515.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:15.853Z,1478842515.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:16.281Z,1478842516.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:16.655Z,1478842516.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:17.057Z,1478842517.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:17.449Z,1478842517.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:17.846Z,1478842517.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:18.253Z,1478842518.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:18.644Z,1478842518.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:19.056Z,1478842519.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:19.461Z,1478842519.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:19.855Z,1478842519.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:20.250Z,1478842520.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:20.642Z,1478842520.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:21.058Z,1478842521.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:21.469Z,1478842521.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:21.877Z,1478842521.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:22.247Z,1478842522.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:22.264Z,1478842522.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:22.643Z,1478842522.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:22.659Z,1478842522.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:23.047Z,1478842523.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:23.106Z,1478842523.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:23.453Z,1478842523.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:23.869Z,1478842523.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:24.273Z,1478842524.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:24.653Z,1478842524.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:25.059Z,1478842525.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:25.459Z,1478842525.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:25.869Z,1478842525.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:26.253Z,1478842526.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:26.637Z,1478842526.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:27.041Z,1478842527.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:27.443Z,1478842527.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:27.845Z,1478842527.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:31.197Z,1478842531.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:31.349Z,1478842531.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:31.744Z,1478842531.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:32.081Z,1478842532.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:32.121Z,1478842532.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:32.483Z,1478842532.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:32.499Z,1478842532.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:32.879Z,1478842532.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:32.901Z,1478842532.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:33.292Z,1478842533.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:33.307Z,1478842533.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:33.689Z,1478842533.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:33.765Z,1478842533.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:34.092Z,1478842534.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:34.125Z,1478842534.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:34.475Z,1478842534.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:34.510Z,1478842534.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:34.874Z,1478842534.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:34.902Z,1478842534.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:35.276Z,1478842535.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:35.304Z,1478842535.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:35.678Z,1478842535.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:35.717Z,1478842535.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:36.090Z,1478842536.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:36.133Z,1478842536.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:36.488Z,1478842536.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:36.573Z,1478842536.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:36.888Z,1478842536.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:36.921Z,1478842536.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:37.275Z,1478842537.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:37.322Z,1478842537.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:37.674Z,1478842537.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:37.693Z,1478842537.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:38.085Z,1478842538.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:38.137Z,1478842538.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:38.477Z,1478842538.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:38.528Z,1478842538.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:38.891Z,1478842538.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:38.924Z,1478842538.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:39.292Z,1478842539.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:39.326Z,1478842539.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:39.701Z,1478842539.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:39.744Z,1478842539.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:40.080Z,1478842540.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:40.095Z,1478842540.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:40.483Z,1478842540.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:40.505Z,1478842540.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:40.878Z,1478842540.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:40.900Z,1478842540.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:41.292Z,1478842541.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:41.308Z,1478842541.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:41.702Z,1478842541.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:41.742Z,1478842541.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:42.090Z,1478842542.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:42.109Z,1478842542.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:42.481Z,1478842542.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:42.504Z,1478842542.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:42.901Z,1478842542.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:43.313Z,1478842543.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:43.745Z,1478842543.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:44.111Z,1478842544.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:44.514Z,1478842544.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:44.917Z,1478842544.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:45.310Z,1478842545.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:45.720Z,1478842545.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:46.105Z,1478842546.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:46.517Z,1478842546.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:46.533Z,1478842546.533 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T05:35:46.913Z,1478842546.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:47.321Z,1478842547.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:47.761Z,1478842547.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:48.141Z,1478842548.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:48.489Z,1478842548.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:48.897Z,1478842548.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:49.300Z,1478842549.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:49.702Z,1478842549.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:50.107Z,1478842550.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:50.565Z,1478842550.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:50.913Z,1478842550.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:51.318Z,1478842551.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:51.721Z,1478842551.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:52.113Z,1478842552.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:52.518Z,1478842552.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:52.921Z,1478842552.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:53.322Z,1478842553.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:53.725Z,1478842553.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:54.129Z,1478842554.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:54.490Z,1478842554.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:54.921Z,1478842554.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:55.312Z,1478842555.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:55.729Z,1478842555.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:56.088Z,1478842556.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:56.116Z,1478842556.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:56.496Z,1478842556.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:56.528Z,1478842556.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:56.892Z,1478842556.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:56.924Z,1478842556.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:57.281Z,1478842557.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:57.318Z,1478842557.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:57.696Z,1478842557.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:57.716Z,1478842557.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:58.078Z,1478842558.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:58.105Z,1478842558.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:58.475Z,1478842558.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:58.505Z,1478842558.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:58.874Z,1478842558.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:58.902Z,1478842558.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:59.289Z,1478842559.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:59.321Z,1478842559.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:35:59.691Z,1478842559.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:35:59.717Z,1478842559.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:00.092Z,1478842560.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:00.132Z,1478842560.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:00.478Z,1478842560.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:00.508Z,1478842560.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:00.882Z,1478842560.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:00.898Z,1478842560.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:01.288Z,1478842561.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:01.304Z,1478842561.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:01.710Z,1478842561.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:01.758Z,1478842561.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:02.098Z,1478842562.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:02.141Z,1478842562.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:02.496Z,1478842562.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:02.536Z,1478842562.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:02.897Z,1478842562.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:02.919Z,1478842562.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:03.274Z,1478842563.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:03.309Z,1478842563.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:03.674Z,1478842563.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:03.700Z,1478842563.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:04.073Z,1478842564.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:04.112Z,1478842564.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:04.475Z,1478842564.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:04.569Z,1478842564.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:04.878Z,1478842564.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:04.915Z,1478842564.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:05.289Z,1478842565.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:05.321Z,1478842565.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:05.688Z,1478842565.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:05.740Z,1478842565.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:06.089Z,1478842566.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:06.121Z,1478842566.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:06.474Z,1478842566.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:06.525Z,1478842566.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:06.875Z,1478842566.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:06.922Z,1478842566.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:07.276Z,1478842567.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:07.316Z,1478842567.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:07.681Z,1478842567.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:07.720Z,1478842567.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:08.088Z,1478842568.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:08.104Z,1478842568.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:08.488Z,1478842568.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:08.508Z,1478842568.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:08.891Z,1478842568.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:08.913Z,1478842568.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:09.281Z,1478842569.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:09.297Z,1478842569.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:09.683Z,1478842569.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:09.721Z,1478842569.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:10.085Z,1478842570.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:10.110Z,1478842570.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:10.475Z,1478842570.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:10.522Z,1478842570.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:10.883Z,1478842570.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:10.913Z,1478842570.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:11.296Z,1478842571.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:11.316Z,1478842571.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:11.709Z,1478842571.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:11.724Z,1478842571.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:12.092Z,1478842572.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:12.142Z,1478842572.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:12.478Z,1478842572.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:12.504Z,1478842572.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:12.875Z,1478842572.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:12.918Z,1478842572.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:13.275Z,1478842573.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:13.295Z,1478842573.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:13.678Z,1478842573.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:13.694Z,1478842573.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:14.092Z,1478842574.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:14.124Z,1478842574.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:14.488Z,1478842574.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:14.525Z,1478842574.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:14.898Z,1478842574.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:14.925Z,1478842574.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:15.280Z,1478842575.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:15.306Z,1478842575.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:15.708Z,1478842575.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:15.750Z,1478842575.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:16.076Z,1478842576.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:16.123Z,1478842576.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:16.485Z,1478842576.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:16.503Z,1478842576.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:16.877Z,1478842576.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:16.929Z,1478842576.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:17.292Z,1478842577.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:17.312Z,1478842577.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:17.692Z,1478842577.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:17.709Z,1478842577.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:18.095Z,1478842578.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:18.115Z,1478842578.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:18.400Z,1478842578.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:18.481Z,1478842578.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:18.520Z,1478842578.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:18.874Z,1478842578.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:18.957Z,1478842578.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:19.196Z,1478842579.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:19.279Z,1478842579.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:19.314Z,1478842579.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:19.674Z,1478842579.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:19.737Z,1478842579.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:20.087Z,1478842580.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:20.118Z,1478842580.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:20.488Z,1478842580.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:20.554Z,1478842580.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:20.890Z,1478842580.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:20.951Z,1478842580.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:21.276Z,1478842581.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:21.294Z,1478842581.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:21.674Z,1478842581.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:21.716Z,1478842581.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:22.074Z,1478842582.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:22.090Z,1478842582.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:22.475Z,1478842582.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:22.521Z,1478842582.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:22.875Z,1478842582.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:22.893Z,1478842582.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:23.288Z,1478842583.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:23.323Z,1478842583.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:23.720Z,1478842583.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:24.122Z,1478842584.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:24.495Z,1478842584.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:24.925Z,1478842584.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:25.298Z,1478842585.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:25.698Z,1478842585.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:26.109Z,1478842586.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:26.526Z,1478842586.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:26.910Z,1478842586.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:27.300Z,1478842587.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:27.700Z,1478842587.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:28.130Z,1478842588.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:31.461Z,1478842591.461 [PNI_TCM](ERROR): CRC does not match. Expected:0x57693 got:0x31116
2016-11-11T05:36:31.462Z,1478842591.462 [PNI_TCM](ERROR): CRC does not match. Expected:0x29005 got:0x31723
2016-11-11T05:36:31.462Z,1478842591.462 [PNI_TCM](ERROR): CRC does not match. Expected:0x36074 got:0x31151
2016-11-11T05:36:31.463Z,1478842591.463 [PNI_TCM](ERROR): CRC does not match. Expected:0x54394 got:0x31264
2016-11-11T05:36:31.463Z,1478842591.463 [PNI_TCM](ERROR): CRC does not match. Expected:0x32843 got:0x31262
2016-11-11T05:36:31.464Z,1478842591.464 [PNI_TCM](ERROR): CRC does not match. Expected:0x29141 got:0x31264
2016-11-11T05:36:31.464Z,1478842591.464 [PNI_TCM](ERROR): CRC does not match. Expected:0x42919 got:0x31045
2016-11-11T05:36:31.465Z,1478842591.465 [PNI_TCM](ERROR): CRC does not match. Expected:0x12148 got:0x31117
2016-11-11T05:36:31.499Z,1478842591.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:31.635Z,1478842591.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:32.047Z,1478842592.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:32.426Z,1478842592.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:32.861Z,1478842592.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:33.204Z,1478842593.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:33.626Z,1478842593.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:34.021Z,1478842594.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:34.422Z,1478842594.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:34.818Z,1478842594.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:35.214Z,1478842595.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:35.665Z,1478842595.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:36.018Z,1478842596.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:36.391Z,1478842596.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:36.817Z,1478842596.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:37.192Z,1478842597.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:37.652Z,1478842597.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:38.005Z,1478842598.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:38.420Z,1478842598.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:38.812Z,1478842598.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:39.203Z,1478842599.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:39.606Z,1478842599.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:39.653Z,1478842599.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:39.974Z,1478842599.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:39.990Z,1478842599.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:40.375Z,1478842600.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:40.391Z,1478842600.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:40.774Z,1478842600.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:40.797Z,1478842600.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:41.189Z,1478842601.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:41.221Z,1478842601.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:41.619Z,1478842601.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:41.647Z,1478842601.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:41.988Z,1478842601.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:42.004Z,1478842602.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:42.377Z,1478842602.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:42.409Z,1478842602.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:42.781Z,1478842602.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:42.801Z,1478842602.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:43.178Z,1478842603.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:43.205Z,1478842603.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:43.577Z,1478842603.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:43.654Z,1478842603.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:43.992Z,1478842603.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:44.028Z,1478842604.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:44.397Z,1478842604.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:44.414Z,1478842604.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:44.792Z,1478842604.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:44.816Z,1478842604.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:45.179Z,1478842605.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:45.211Z,1478842605.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:45.574Z,1478842605.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:45.614Z,1478842605.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:45.976Z,1478842605.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:46.024Z,1478842606.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:46.384Z,1478842606.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:46.416Z,1478842606.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:46.774Z,1478842606.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:46.849Z,1478842606.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:47.192Z,1478842607.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:47.229Z,1478842607.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:47.596Z,1478842607.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:36:47.628Z,1478842607.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:48.055Z,1478842608.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:48.398Z,1478842608.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:48.833Z,1478842608.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:49.233Z,1478842609.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:49.631Z,1478842609.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:50.012Z,1478842610.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:50.412Z,1478842610.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:50.811Z,1478842610.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:51.204Z,1478842611.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:51.634Z,1478842611.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:51.990Z,1478842611.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:52.411Z,1478842612.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:52.790Z,1478842612.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:53.230Z,1478842613.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:53.660Z,1478842613.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:54.013Z,1478842614.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:54.399Z,1478842614.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:54.805Z,1478842614.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:55.208Z,1478842615.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:55.632Z,1478842615.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:56.014Z,1478842616.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:56.414Z,1478842616.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:56.821Z,1478842616.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:57.209Z,1478842617.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:57.657Z,1478842617.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:58.018Z,1478842618.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:58.395Z,1478842618.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:58.796Z,1478842618.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:59.235Z,1478842619.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:36:59.604Z,1478842619.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:00.020Z,1478842620.020 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:00.020Z,1478842620.020 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2016-11-11T05:37:00.020Z,1478842620.020 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:37:00.022Z,1478842620.022 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:00.022Z,1478842620.022 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2016-11-11T05:37:00.022Z,1478842620.022 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T05:37:00.036Z,1478842620.036 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:00.036Z,1478842620.036 [DeadReckonWithRespectToWater] Software Fault, FailCount= 17
2016-11-11T05:37:00.037Z,1478842620.037 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T05:37:00.039Z,1478842620.039 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:00.039Z,1478842620.039 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2016-11-11T05:37:00.039Z,1478842620.039 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:37:00.041Z,1478842620.041 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:00.041Z,1478842620.041 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 17
2016-11-11T05:37:00.041Z,1478842620.041 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:37:00.090Z,1478842620.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:37:00.091Z,1478842620.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T05:37:00.091Z,1478842620.091 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T05:37:00.091Z,1478842620.091 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:37:00.092Z,1478842620.092 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:37:00.425Z,1478842620.425 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:37:00.425Z,1478842620.425 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2016-11-11T05:37:00.426Z,1478842620.426 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T05:37:00.426Z,1478842620.426 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2016-11-11T05:37:00.426Z,1478842620.427 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T05:37:00.427Z,1478842620.427 [DeadReckonWithRespectToWater] No Fault, FailCount= 17
2016-11-11T05:37:00.431Z,1478842620.431 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:37:00.431Z,1478842620.431 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2016-11-11T05:37:00.432Z,1478842620.432 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:37:00.432Z,1478842620.432 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 17
2016-11-11T05:37:00.805Z,1478842620.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:37:00.805Z,1478842620.805 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:37:00.805Z,1478842620.806 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:37:00.806Z,1478842620.806 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T05:37:00.806Z,1478842620.806 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:37:00.807Z,1478842620.807 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:37:00.811Z,1478842620.811 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T05:37:00.812Z,1478842620.812 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:37:00.812Z,1478842620.812 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:37:00.813Z,1478842620.813 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:37:00.813Z,1478842620.813 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:37:00.813Z,1478842620.813 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:37:00.814Z,1478842620.814 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:37:00.814Z,1478842620.814 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:37:00.814Z,1478842620.815 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:37:01.249Z,1478842621.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:01.629Z,1478842621.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:02.014Z,1478842622.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:02.441Z,1478842622.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:02.823Z,1478842622.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:03.238Z,1478842623.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:03.637Z,1478842623.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:04.013Z,1478842624.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:04.405Z,1478842624.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:04.809Z,1478842624.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:05.220Z,1478842625.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:05.625Z,1478842625.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:06.014Z,1478842626.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:06.417Z,1478842626.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:06.797Z,1478842626.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:07.200Z,1478842627.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:07.625Z,1478842627.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:08.021Z,1478842628.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:08.409Z,1478842628.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:08.830Z,1478842628.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:09.200Z,1478842629.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:09.614Z,1478842629.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:10.000Z,1478842630.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:10.400Z,1478842630.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:10.808Z,1478842630.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:11.210Z,1478842631.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:11.658Z,1478842631.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:12.040Z,1478842632.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:12.413Z,1478842632.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:12.809Z,1478842632.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:13.203Z,1478842633.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:13.600Z,1478842633.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:14.015Z,1478842634.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:14.441Z,1478842634.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:14.820Z,1478842634.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:15.216Z,1478842635.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:15.661Z,1478842635.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:16.029Z,1478842636.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:16.414Z,1478842636.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:16.833Z,1478842636.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:17.218Z,1478842637.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:17.660Z,1478842637.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:18.041Z,1478842638.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:18.390Z,1478842638.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:18.800Z,1478842638.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:19.200Z,1478842639.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:19.596Z,1478842639.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:20.012Z,1478842640.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:20.413Z,1478842640.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:20.833Z,1478842640.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:21.202Z,1478842641.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:21.603Z,1478842641.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:22.009Z,1478842642.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:22.423Z,1478842642.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:22.812Z,1478842642.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:23.157Z,1478842643.157 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T05:37:23.157Z,1478842643.157 [NAL9602] Data Fault, FailCount= 5
2016-11-11T05:37:23.157Z,1478842643.157 [NAL9602](ERROR): Data Fault
2016-11-11T05:37:23.217Z,1478842643.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:23.250Z,1478842643.250 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T05:37:23.256Z,1478842643.256 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-11-11T05:37:23.557Z,1478842643.557 [NAL9602](INFO): Powering down
2016-11-11T05:37:23.617Z,1478842643.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:23.655Z,1478842643.655 [CommandLine](FAULT): Scheduling is paused
2016-11-11T05:37:24.004Z,1478842644.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:24.411Z,1478842644.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:24.810Z,1478842644.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:25.208Z,1478842645.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:25.619Z,1478842645.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:26.008Z,1478842646.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:26.397Z,1478842646.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:26.795Z,1478842646.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:26.801Z,1478842646.801 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T05:32:26.5Z
2016-11-11T05:37:26.801Z,1478842646.801 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T05:37:26.801Z,1478842646.801 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T05:37:27.220Z,1478842647.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:28.241Z,1478842648.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:28.374Z,1478842648.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:31.850Z,1478842651.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:31.887Z,1478842651.887 [DataOverHttps](INFO): Sending 111 bytes from file Logs/20161111T044527/Courier0020.lzma
2016-11-11T05:37:31.981Z,1478842651.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:32.321Z,1478842652.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:32.677Z,1478842652.677 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0020.lzma.bak
2016-11-11T05:37:32.677Z,1478842652.677 [DataOverHttps](INFO): SBD MOMSN=4555055
2016-11-11T05:37:32.788Z,1478842652.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:34.191Z,1478842654.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:34.345Z,1478842654.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:37.723Z,1478842657.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:37.869Z,1478842657.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:38.192Z,1478842658.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:38.596Z,1478842658.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:38.991Z,1478842658.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:39.398Z,1478842659.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:42.852Z,1478842662.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:42.908Z,1478842662.908 [DataOverHttps](INFO): Sending 188 bytes from file Logs/20161111T044527/Express0021.lzma
2016-11-11T05:37:42.993Z,1478842662.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:37:43.352Z,1478842663.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:00.764Z,1478842680.764 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0021.lzma.bak
2016-11-11T05:38:00.764Z,1478842680.764 [DataOverHttps](INFO): SBD MOMSN=4555058
2016-11-11T05:38:00.891Z,1478842680.891 [BPC1](ERROR): Failed to receive battery data
2016-11-11T05:38:00.892Z,1478842680.892 [BPC1] Communications Fault, FailCount= 1
2016-11-11T05:38:00.892Z,1478842680.892 [BPC1](ERROR): Communications Fault
2016-11-11T05:38:00.900Z,1478842680.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:00.953Z,1478842680.953 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T05:38:02.455Z,1478842682.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:02.461Z,1478842682.461 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T05:38:02.461Z,1478842682.461 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T05:38:02.461Z,1478842682.461 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T05:38:02.594Z,1478842682.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:06.019Z,1478842686.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:06.035Z,1478842686.035 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:38:06.035Z,1478842686.035 [BPC1] No Fault, FailCount= 1
2016-11-11T05:38:06.210Z,1478842686.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:06.488Z,1478842686.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:06.932Z,1478842686.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:07.287Z,1478842687.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:07.692Z,1478842687.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:08.087Z,1478842688.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:08.486Z,1478842688.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:08.885Z,1478842688.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:09.271Z,1478842689.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:38:09.286Z,1478842689.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:09.706Z,1478842689.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:38:09.738Z,1478842689.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:10.067Z,1478842690.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:38:10.107Z,1478842690.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:10.516Z,1478842690.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:10.901Z,1478842690.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:11.286Z,1478842691.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:11.681Z,1478842691.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:12.091Z,1478842692.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:12.495Z,1478842692.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:12.909Z,1478842692.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:13.307Z,1478842693.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:13.709Z,1478842693.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:14.110Z,1478842694.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:14.502Z,1478842694.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:14.914Z,1478842694.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:15.301Z,1478842695.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:15.692Z,1478842695.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:16.094Z,1478842696.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:16.505Z,1478842696.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:16.897Z,1478842696.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:17.351Z,1478842697.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:17.705Z,1478842697.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:18.113Z,1478842698.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:18.481Z,1478842698.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:18.885Z,1478842698.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:19.333Z,1478842699.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:19.688Z,1478842699.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:20.094Z,1478842700.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:20.537Z,1478842700.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:20.895Z,1478842700.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:21.340Z,1478842701.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:21.741Z,1478842701.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:22.152Z,1478842702.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:22.505Z,1478842702.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:22.904Z,1478842702.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:23.307Z,1478842703.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:23.706Z,1478842703.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:24.094Z,1478842704.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:24.534Z,1478842704.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:24.901Z,1478842704.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:25.348Z,1478842705.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:25.764Z,1478842705.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:26.097Z,1478842706.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:26.490Z,1478842706.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:26.938Z,1478842706.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:27.297Z,1478842707.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:27.695Z,1478842707.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:28.096Z,1478842708.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:28.498Z,1478842708.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:28.885Z,1478842708.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:29.284Z,1478842709.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:29.705Z,1478842709.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:30.080Z,1478842710.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:30.489Z,1478842710.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:30.883Z,1478842710.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:31.287Z,1478842711.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:31.696Z,1478842711.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:32.095Z,1478842712.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:32.525Z,1478842712.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:32.899Z,1478842712.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:33.299Z,1478842713.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:33.713Z,1478842713.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:34.085Z,1478842714.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:34.516Z,1478842714.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:34.915Z,1478842714.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:35.289Z,1478842715.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:35.685Z,1478842715.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:36.088Z,1478842716.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:36.489Z,1478842716.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:36.901Z,1478842716.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:37.277Z,1478842717.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:37.689Z,1478842717.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:38.084Z,1478842718.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:38.478Z,1478842718.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:38.881Z,1478842718.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:39.284Z,1478842719.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:39.685Z,1478842719.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:40.085Z,1478842720.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:40.465Z,1478842720.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:38:40.484Z,1478842720.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:40.869Z,1478842720.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:38:40.885Z,1478842720.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:41.272Z,1478842721.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:38:41.289Z,1478842721.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:41.686Z,1478842721.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:42.090Z,1478842722.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:42.483Z,1478842722.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:42.889Z,1478842722.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:43.285Z,1478842723.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:43.689Z,1478842723.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:44.084Z,1478842724.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:44.484Z,1478842724.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:44.885Z,1478842724.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:45.301Z,1478842725.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:45.705Z,1478842725.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:46.083Z,1478842726.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:46.510Z,1478842726.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:46.884Z,1478842726.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:47.310Z,1478842727.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:47.710Z,1478842727.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:48.084Z,1478842728.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:48.489Z,1478842728.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:48.884Z,1478842728.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:49.280Z,1478842729.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:49.683Z,1478842729.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:50.082Z,1478842730.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:50.477Z,1478842730.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:50.916Z,1478842730.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:51.284Z,1478842731.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:51.691Z,1478842731.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:52.079Z,1478842732.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:52.484Z,1478842732.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:52.884Z,1478842732.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:53.289Z,1478842733.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:53.692Z,1478842733.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:54.084Z,1478842734.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:54.489Z,1478842734.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:54.884Z,1478842734.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:55.280Z,1478842735.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:55.689Z,1478842735.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:56.094Z,1478842736.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:56.484Z,1478842736.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:56.890Z,1478842736.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:57.284Z,1478842737.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:57.690Z,1478842737.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:58.084Z,1478842738.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:58.522Z,1478842738.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:58.880Z,1478842738.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:59.318Z,1478842739.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:38:59.684Z,1478842739.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:00.109Z,1478842740.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:00.519Z,1478842740.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:00.885Z,1478842740.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:01.284Z,1478842741.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:01.685Z,1478842741.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:02.089Z,1478842742.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:02.517Z,1478842742.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:02.905Z,1478842742.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:09.263Z,1478842749.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:09.437Z,1478842749.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:09.819Z,1478842749.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:10.229Z,1478842750.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:10.612Z,1478842750.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:11.037Z,1478842751.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:11.442Z,1478842751.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:11.816Z,1478842751.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:12.220Z,1478842752.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:12.657Z,1478842752.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:13.027Z,1478842753.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:13.434Z,1478842753.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:13.849Z,1478842753.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:14.229Z,1478842754.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:14.612Z,1478842754.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:15.010Z,1478842755.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:15.413Z,1478842755.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:15.820Z,1478842755.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:16.211Z,1478842756.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:16.611Z,1478842756.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:17.011Z,1478842757.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:17.436Z,1478842757.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:17.806Z,1478842757.806 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T05:39:17.830Z,1478842757.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:18.210Z,1478842758.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:18.609Z,1478842758.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:19.041Z,1478842759.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:19.401Z,1478842759.401 [PNI_TCM](ERROR): CRC does not match. Expected:0x21260 got:0x2228
2016-11-11T05:39:19.442Z,1478842759.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:19.825Z,1478842759.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:20.210Z,1478842760.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:20.614Z,1478842760.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:21.017Z,1478842761.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:21.411Z,1478842761.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:21.817Z,1478842761.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:22.229Z,1478842762.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:22.602Z,1478842762.602 [PNI_TCM](ERROR): CRC does not match. Expected:0x13055 got:0x9462
2016-11-11T05:39:22.629Z,1478842762.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:23.018Z,1478842763.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:23.421Z,1478842763.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:23.437Z,1478842763.437 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T05:39:23.437Z,1478842763.437 [NAL9602] No Fault, FailCount= 5
2016-11-11T05:39:23.769Z,1478842763.769 [NAL9602](INFO): Powering up NAL9602
2016-11-11T05:39:23.825Z,1478842763.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:24.237Z,1478842764.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:24.641Z,1478842764.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:25.013Z,1478842765.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:25.449Z,1478842765.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:25.804Z,1478842765.804 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2016-11-11T05:39:25.829Z,1478842765.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:26.237Z,1478842766.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:26.630Z,1478842766.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:27.025Z,1478842767.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:27.403Z,1478842767.403 [PNI_TCM](ERROR): CRC does not match. Expected:0x47280 got:0x6978
2016-11-11T05:39:27.441Z,1478842767.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:27.814Z,1478842767.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:28.209Z,1478842768.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:28.608Z,1478842768.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:29.011Z,1478842769.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:29.409Z,1478842769.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:29.813Z,1478842769.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:30.211Z,1478842770.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:30.612Z,1478842770.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:31.010Z,1478842771.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:31.424Z,1478842771.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:31.820Z,1478842771.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:32.210Z,1478842772.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:32.610Z,1478842772.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:33.017Z,1478842773.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:33.417Z,1478842773.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:33.818Z,1478842773.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:34.225Z,1478842774.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:34.569Z,1478842774.569 [NAL9602](INFO): NAL9602 initialized
2016-11-11T05:39:34.615Z,1478842774.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:35.020Z,1478842775.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:35.422Z,1478842775.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:35.822Z,1478842775.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:36.222Z,1478842776.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:36.611Z,1478842776.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:37.012Z,1478842777.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:37.482Z,1478842777.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:37.818Z,1478842777.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:38.265Z,1478842778.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:38.629Z,1478842778.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:39.046Z,1478842779.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:39.441Z,1478842779.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:39.815Z,1478842779.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:40.233Z,1478842780.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:40.602Z,1478842780.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:41.001Z,1478842781.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:41.434Z,1478842781.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:41.836Z,1478842781.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:42.235Z,1478842782.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:42.609Z,1478842782.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:43.007Z,1478842783.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:43.413Z,1478842783.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:43.810Z,1478842783.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:44.215Z,1478842784.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:44.619Z,1478842784.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:45.017Z,1478842785.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:45.409Z,1478842785.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:45.822Z,1478842785.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:46.217Z,1478842786.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:46.610Z,1478842786.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:47.017Z,1478842787.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:47.425Z,1478842787.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:47.825Z,1478842787.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:48.221Z,1478842788.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:48.588Z,1478842788.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:48.613Z,1478842788.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:48.987Z,1478842788.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:49.021Z,1478842789.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:49.386Z,1478842789.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:49.414Z,1478842789.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:49.820Z,1478842789.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:49.877Z,1478842789.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:50.200Z,1478842790.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:50.261Z,1478842790.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:50.600Z,1478842790.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:50.626Z,1478842790.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:50.986Z,1478842790.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:51.038Z,1478842791.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:51.390Z,1478842791.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:51.421Z,1478842791.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:51.797Z,1478842791.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:51.853Z,1478842791.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:52.196Z,1478842792.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:52.211Z,1478842792.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:52.588Z,1478842792.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:52.641Z,1478842792.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:52.000Z,1478842793.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:53.016Z,1478842793.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:53.402Z,1478842793.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:53.417Z,1478842793.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:53.800Z,1478842793.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:53.825Z,1478842793.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:54.192Z,1478842794.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:54.212Z,1478842794.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:54.594Z,1478842794.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:54.609Z,1478842794.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:54.993Z,1478842794.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:55.013Z,1478842795.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:55.401Z,1478842795.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:55.421Z,1478842795.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:55.806Z,1478842795.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:55.829Z,1478842795.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:56.206Z,1478842796.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:56.222Z,1478842796.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:56.604Z,1478842796.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:56.624Z,1478842796.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:56.993Z,1478842796.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:57.013Z,1478842797.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:57.393Z,1478842797.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:57.409Z,1478842797.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:57.799Z,1478842797.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:57.826Z,1478842797.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:58.186Z,1478842798.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:58.212Z,1478842798.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:58.604Z,1478842798.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:58.628Z,1478842798.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:59.007Z,1478842799.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:59.023Z,1478842799.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:59.416Z,1478842799.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:59.431Z,1478842799.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:39:59.786Z,1478842799.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:39:59.802Z,1478842799.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:00.190Z,1478842800.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:00.206Z,1478842800.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:00.586Z,1478842800.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:00.609Z,1478842800.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:00.990Z,1478842800.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:01.006Z,1478842801.006 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:01.006Z,1478842801.006 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2016-11-11T05:40:01.006Z,1478842801.006 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:40:01.009Z,1478842801.009 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:01.009Z,1478842801.009 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2016-11-11T05:40:01.009Z,1478842801.009 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T05:40:01.011Z,1478842801.011 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:01.011Z,1478842801.011 [DeadReckonWithRespectToWater] Software Fault, FailCount= 18
2016-11-11T05:40:01.011Z,1478842801.011 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T05:40:01.013Z,1478842801.013 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:01.013Z,1478842801.013 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2016-11-11T05:40:01.013Z,1478842801.013 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:40:01.023Z,1478842801.023 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:01.024Z,1478842801.024 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 18
2016-11-11T05:40:01.024Z,1478842801.024 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:40:01.045Z,1478842801.046 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:40:01.046Z,1478842801.046 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T05:40:01.046Z,1478842801.046 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T05:40:01.046Z,1478842801.046 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:40:01.047Z,1478842801.046 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:40:01.412Z,1478842801.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:01.464Z,1478842801.464 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:40:01.464Z,1478842801.464 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2016-11-11T05:40:01.465Z,1478842801.465 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T05:40:01.465Z,1478842801.465 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2016-11-11T05:40:01.465Z,1478842801.465 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T05:40:01.465Z,1478842801.465 [DeadReckonWithRespectToWater] No Fault, FailCount= 18
2016-11-11T05:40:01.466Z,1478842801.466 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:40:01.466Z,1478842801.466 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2016-11-11T05:40:01.467Z,1478842801.467 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:40:01.467Z,1478842801.467 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 18
2016-11-11T05:40:01.812Z,1478842801.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:01.826Z,1478842801.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:40:01.827Z,1478842801.827 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:40:01.843Z,1478842801.843 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:40:01.844Z,1478842801.844 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T05:40:01.844Z,1478842801.844 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:40:01.845Z,1478842801.845 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:40:01.845Z,1478842801.845 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T05:40:01.845Z,1478842801.845 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:40:01.846Z,1478842801.846 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:40:01.846Z,1478842801.846 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:40:01.847Z,1478842801.847 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:40:01.851Z,1478842801.851 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:40:01.852Z,1478842801.852 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:40:01.852Z,1478842801.852 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:40:01.853Z,1478842801.852 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:40:02.204Z,1478842802.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:02.226Z,1478842802.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:02.588Z,1478842802.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:02.612Z,1478842802.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:02.993Z,1478842802.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:03.034Z,1478842803.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:06.423Z,1478842806.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:06.485Z,1478842806.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:06.572Z,1478842806.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:06.601Z,1478842806.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:06.970Z,1478842806.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:06.987Z,1478842806.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:07.374Z,1478842807.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:07.420Z,1478842807.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:07.773Z,1478842807.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:07.797Z,1478842807.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:08.150Z,1478842808.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:08.194Z,1478842808.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:08.551Z,1478842808.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:08.614Z,1478842808.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:08.952Z,1478842808.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:08.989Z,1478842808.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:09.350Z,1478842809.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:09.386Z,1478842809.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:09.778Z,1478842809.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:09.801Z,1478842809.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:10.176Z,1478842810.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:10.191Z,1478842810.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:10.573Z,1478842810.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:10.588Z,1478842810.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:10.957Z,1478842810.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:10.984Z,1478842810.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:11.358Z,1478842811.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:11.384Z,1478842811.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:11.751Z,1478842811.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:11.779Z,1478842811.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:12.150Z,1478842812.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:12.190Z,1478842812.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:12.564Z,1478842812.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:12.597Z,1478842812.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:12.964Z,1478842812.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:12.997Z,1478842812.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:13.364Z,1478842813.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:13.390Z,1478842813.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:13.758Z,1478842813.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:13.789Z,1478842813.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:14.150Z,1478842814.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:14.217Z,1478842814.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:14.553Z,1478842814.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:14.573Z,1478842814.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:14.955Z,1478842814.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:14.970Z,1478842814.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:15.356Z,1478842815.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:15.372Z,1478842815.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:15.772Z,1478842815.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:15.808Z,1478842815.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:16.164Z,1478842816.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:16.185Z,1478842816.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:16.566Z,1478842816.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:16.581Z,1478842816.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:16.952Z,1478842816.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:16.986Z,1478842816.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:17.352Z,1478842817.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:17.385Z,1478842817.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:17.752Z,1478842817.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:17.773Z,1478842817.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:18.154Z,1478842818.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:18.170Z,1478842818.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:18.564Z,1478842818.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:18.585Z,1478842818.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:18.968Z,1478842818.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:19.009Z,1478842819.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:19.365Z,1478842819.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:19.389Z,1478842819.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:19.757Z,1478842819.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:19.789Z,1478842819.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:20.150Z,1478842820.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:20.177Z,1478842820.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:20.550Z,1478842820.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:20.601Z,1478842820.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:20.952Z,1478842820.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:20.989Z,1478842820.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:21.350Z,1478842821.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:21.402Z,1478842821.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:21.775Z,1478842821.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:21.791Z,1478842821.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:22.175Z,1478842822.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:22.231Z,1478842822.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:22.564Z,1478842822.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:22.597Z,1478842822.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:22.964Z,1478842822.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:22.997Z,1478842822.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:23.358Z,1478842823.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:23.390Z,1478842823.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:23.760Z,1478842823.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:23.793Z,1478842823.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:24.153Z,1478842824.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:24.189Z,1478842824.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:24.564Z,1478842824.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:24.595Z,1478842824.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:24.968Z,1478842824.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:24.993Z,1478842824.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:25.364Z,1478842825.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:25.394Z,1478842825.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:25.761Z,1478842825.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:25.789Z,1478842825.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:26.153Z,1478842826.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:26.173Z,1478842826.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:26.549Z,1478842826.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:26.568Z,1478842826.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:26.958Z,1478842826.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:26.974Z,1478842826.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:27.356Z,1478842827.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:27.372Z,1478842827.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:27.772Z,1478842827.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:27.804Z,1478842827.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:28.164Z,1478842828.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:28.180Z,1478842828.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:28.567Z,1478842828.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:28.582Z,1478842828.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:28.958Z,1478842828.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:28.974Z,1478842828.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:29.360Z,1478842829.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:29.377Z,1478842829.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:29.765Z,1478842829.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:29.785Z,1478842829.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:30.154Z,1478842830.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:30.177Z,1478842830.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:30.570Z,1478842830.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:30.586Z,1478842830.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:30.970Z,1478842830.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:30.993Z,1478842830.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:31.371Z,1478842831.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:31.386Z,1478842831.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:31.766Z,1478842831.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:31.781Z,1478842831.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:32.150Z,1478842832.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:32.181Z,1478842832.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:32.550Z,1478842832.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:32.613Z,1478842832.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:32.952Z,1478842832.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:32.989Z,1478842832.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:33.358Z,1478842833.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:33.393Z,1478842833.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:33.768Z,1478842833.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:33.790Z,1478842833.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:34.168Z,1478842834.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:34.189Z,1478842834.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:34.569Z,1478842834.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:34.629Z,1478842834.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:34.950Z,1478842834.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:34.974Z,1478842834.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:35.358Z,1478842835.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:35.423Z,1478842835.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:35.755Z,1478842835.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:35.787Z,1478842835.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:36.155Z,1478842836.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:36.198Z,1478842836.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:36.572Z,1478842836.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:36.636Z,1478842836.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:36.964Z,1478842836.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:36.992Z,1478842836.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:37.364Z,1478842837.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:37.400Z,1478842837.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:37.766Z,1478842837.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:37.795Z,1478842837.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:38.150Z,1478842838.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:38.177Z,1478842838.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:38.553Z,1478842838.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:38.588Z,1478842838.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:38.953Z,1478842838.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:38.981Z,1478842838.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:39.367Z,1478842839.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:39.382Z,1478842839.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:39.772Z,1478842839.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:39.788Z,1478842839.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:40.172Z,1478842840.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:40.188Z,1478842840.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:40.550Z,1478842840.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:40.585Z,1478842840.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:40.951Z,1478842840.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:40.987Z,1478842840.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:41.350Z,1478842841.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:41.382Z,1478842841.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:41.768Z,1478842841.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:41.793Z,1478842841.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:42.150Z,1478842842.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:42.183Z,1478842842.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:42.568Z,1478842842.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:42.591Z,1478842842.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:42.972Z,1478842842.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:42.992Z,1478842842.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:43.372Z,1478842843.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:43.393Z,1478842843.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:43.758Z,1478842843.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:43.785Z,1478842843.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:44.150Z,1478842844.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:44.187Z,1478842844.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:44.551Z,1478842844.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:44.584Z,1478842844.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:44.950Z,1478842844.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:44.985Z,1478842844.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:45.364Z,1478842845.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:45.390Z,1478842845.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:45.785Z,1478842845.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:45.803Z,1478842845.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:46.168Z,1478842846.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:46.198Z,1478842846.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:46.561Z,1478842846.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:46.591Z,1478842846.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:46.957Z,1478842846.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:47.013Z,1478842847.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:47.354Z,1478842847.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:47.389Z,1478842847.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:47.759Z,1478842847.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:47.775Z,1478842847.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:48.154Z,1478842848.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:48.174Z,1478842848.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:48.564Z,1478842848.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:48.621Z,1478842848.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:48.966Z,1478842848.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:48.982Z,1478842848.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:49.365Z,1478842849.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:49.385Z,1478842849.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:49.763Z,1478842849.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:49.817Z,1478842849.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:50.158Z,1478842850.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:50.173Z,1478842850.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:50.555Z,1478842850.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:50.612Z,1478842850.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:50.965Z,1478842850.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:51.011Z,1478842851.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:51.371Z,1478842851.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:51.393Z,1478842851.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:51.768Z,1478842851.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:51.792Z,1478842851.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:52.171Z,1478842852.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:52.193Z,1478842852.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:52.550Z,1478842852.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:52.581Z,1478842852.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:52.950Z,1478842852.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:52.982Z,1478842852.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:53.358Z,1478842853.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:53.393Z,1478842853.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:53.759Z,1478842853.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:53.793Z,1478842853.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:54.153Z,1478842854.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:54.189Z,1478842854.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:54.568Z,1478842854.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:54.599Z,1478842854.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:54.964Z,1478842854.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:54.996Z,1478842854.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:55.364Z,1478842855.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:55.397Z,1478842855.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:55.757Z,1478842855.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:55.773Z,1478842855.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:56.153Z,1478842856.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:56.210Z,1478842856.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:56.555Z,1478842856.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:56.580Z,1478842856.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:56.957Z,1478842856.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:56.972Z,1478842856.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:57.364Z,1478842857.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:57.385Z,1478842857.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:57.771Z,1478842857.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:57.787Z,1478842857.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:58.170Z,1478842858.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:58.186Z,1478842858.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:58.550Z,1478842858.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:58.585Z,1478842858.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:58.950Z,1478842858.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:58.978Z,1478842858.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:59.349Z,1478842859.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:59.381Z,1478842859.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:40:59.759Z,1478842859.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:40:59.786Z,1478842859.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:00.150Z,1478842860.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:00.185Z,1478842860.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:00.570Z,1478842860.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:00.593Z,1478842860.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:00.972Z,1478842860.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:00.987Z,1478842860.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:01.371Z,1478842861.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:01.387Z,1478842861.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:01.758Z,1478842861.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:01.790Z,1478842861.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:02.150Z,1478842862.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:02.190Z,1478842862.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:02.550Z,1478842862.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:02.566Z,1478842862.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:02.949Z,1478842862.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:02.969Z,1478842862.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:03.383Z,1478842863.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:03.418Z,1478842863.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:06.708Z,1478842866.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:06.724Z,1478842866.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:06.849Z,1478842866.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:06.869Z,1478842866.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:07.208Z,1478842867.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:07.226Z,1478842867.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:07.608Z,1478842867.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:07.669Z,1478842867.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:08.004Z,1478842868.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:08.020Z,1478842868.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:08.418Z,1478842868.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:08.465Z,1478842868.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:08.814Z,1478842868.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:08.857Z,1478842868.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:09.237Z,1478842869.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:09.266Z,1478842869.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:09.608Z,1478842869.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:09.644Z,1478842869.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:09.996Z,1478842869.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:10.030Z,1478842870.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:10.394Z,1478842870.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:10.434Z,1478842870.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:10.808Z,1478842870.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:10.840Z,1478842870.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:11.208Z,1478842871.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:11.244Z,1478842871.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:11.627Z,1478842871.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:11.643Z,1478842871.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:11.999Z,1478842871.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:12.039Z,1478842872.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:12.398Z,1478842872.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:12.436Z,1478842872.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:12.799Z,1478842872.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:12.830Z,1478842872.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:13.194Z,1478842873.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:13.240Z,1478842873.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:13.625Z,1478842873.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:13.645Z,1478842873.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:14.008Z,1478842874.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:14.045Z,1478842874.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:14.412Z,1478842874.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:14.442Z,1478842874.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:14.798Z,1478842874.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:14.829Z,1478842874.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:15.203Z,1478842875.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:15.219Z,1478842875.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:15.598Z,1478842875.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:15.641Z,1478842875.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:15.999Z,1478842875.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:16.025Z,1478842876.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:16.407Z,1478842876.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:16.424Z,1478842876.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:16.813Z,1478842876.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:16.837Z,1478842876.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:17.214Z,1478842877.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:17.257Z,1478842877.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:17.618Z,1478842877.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:17.626Z,1478842877.626 [PNI_TCM](ERROR): CRC does not match. Expected:0x32130 got:0x6978
2016-11-11T05:41:17.661Z,1478842877.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:18.009Z,1478842878.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:18.037Z,1478842878.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:18.400Z,1478842878.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:18.423Z,1478842878.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:18.807Z,1478842878.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:18.841Z,1478842878.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:19.214Z,1478842879.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:19.237Z,1478842879.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:19.621Z,1478842879.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:19.641Z,1478842879.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:20.020Z,1478842880.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:20.036Z,1478842880.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:20.423Z,1478842880.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:20.439Z,1478842880.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:20.794Z,1478842880.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:20.877Z,1478842880.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:21.195Z,1478842881.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:21.230Z,1478842881.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:21.598Z,1478842881.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:21.625Z,1478842881.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:21.995Z,1478842881.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:22.053Z,1478842882.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:22.394Z,1478842882.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:22.414Z,1478842882.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:22.813Z,1478842882.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:22.854Z,1478842882.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:23.219Z,1478842883.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:23.279Z,1478842883.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:23.618Z,1478842883.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:23.643Z,1478842883.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:24.004Z,1478842884.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:24.021Z,1478842884.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:24.401Z,1478842884.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:24.417Z,1478842884.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:24.808Z,1478842884.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:24.824Z,1478842884.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:25.203Z,1478842885.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:25.230Z,1478842885.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:25.621Z,1478842885.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:25.628Z,1478842885.628 [PNI_TCM](ERROR): CRC does not match. Expected:0x50059 got:0x4319
2016-11-11T05:41:25.661Z,1478842885.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:26.010Z,1478842886.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:26.025Z,1478842886.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:26.412Z,1478842886.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:26.433Z,1478842886.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:26.803Z,1478842886.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:26.822Z,1478842886.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:27.205Z,1478842887.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:27.221Z,1478842887.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:27.613Z,1478842887.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:27.629Z,1478842887.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:28.004Z,1478842888.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:28.020Z,1478842888.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:28.403Z,1478842888.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:28.421Z,1478842888.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:28.814Z,1478842888.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:28.845Z,1478842888.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:29.214Z,1478842889.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:29.230Z,1478842889.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:29.616Z,1478842889.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:29.632Z,1478842889.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:30.009Z,1478842890.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:30.032Z,1478842890.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:30.397Z,1478842890.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:30.433Z,1478842890.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:30.798Z,1478842890.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:30.833Z,1478842890.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:31.202Z,1478842891.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:31.230Z,1478842891.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:31.617Z,1478842891.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:31.645Z,1478842891.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:32.020Z,1478842892.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:32.036Z,1478842892.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:32.425Z,1478842892.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:32.442Z,1478842892.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:32.798Z,1478842892.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:32.837Z,1478842892.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:33.204Z,1478842893.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:33.231Z,1478842893.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:33.606Z,1478842893.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:33.633Z,1478842893.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:33.999Z,1478842893.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:34.032Z,1478842894.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:34.408Z,1478842894.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:34.428Z,1478842894.428 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T05:41:34.428Z,1478842894.428 [BPC1] Data Fault, FailCount= 1
2016-11-11T05:41:34.428Z,1478842894.428 [BPC1](ERROR): Data Fault
2016-11-11T05:41:34.436Z,1478842894.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:34.452Z,1478842894.453 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:41:34.810Z,1478842894.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:34.846Z,1478842894.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:35.208Z,1478842895.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:35.238Z,1478842895.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:35.602Z,1478842895.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:35.618Z,1478842895.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:35.655Z,1478842895.655 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:41:35.655Z,1478842895.655 [BPC1] No Fault, FailCount= 1
2016-11-11T05:41:36.002Z,1478842896.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:36.085Z,1478842896.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:36.400Z,1478842896.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:36.416Z,1478842896.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:36.807Z,1478842896.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:36.857Z,1478842896.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:37.206Z,1478842897.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:37.222Z,1478842897.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:37.616Z,1478842897.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:37.648Z,1478842897.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:38.011Z,1478842898.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:38.027Z,1478842898.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:38.412Z,1478842898.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:38.428Z,1478842898.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:38.796Z,1478842898.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:38.833Z,1478842898.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:39.194Z,1478842899.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:39.233Z,1478842899.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:39.604Z,1478842899.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:39.637Z,1478842899.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:39.998Z,1478842899.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:40.026Z,1478842900.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:40.398Z,1478842900.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:40.426Z,1478842900.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:40.816Z,1478842900.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:40.836Z,1478842900.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:41.212Z,1478842901.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:41.241Z,1478842901.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:41.626Z,1478842901.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:41.641Z,1478842901.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:41.999Z,1478842901.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:42.027Z,1478842902.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:42.400Z,1478842902.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:42.424Z,1478842902.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:42.799Z,1478842902.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:42.815Z,1478842902.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:43.203Z,1478842903.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:43.219Z,1478842903.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:43.616Z,1478842903.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:43.652Z,1478842903.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:44.009Z,1478842904.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:44.025Z,1478842904.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:44.408Z,1478842904.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:44.424Z,1478842904.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:44.798Z,1478842904.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:44.818Z,1478842904.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:45.210Z,1478842905.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:45.227Z,1478842905.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:45.607Z,1478842905.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:45.632Z,1478842905.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:46.007Z,1478842906.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:46.024Z,1478842906.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:46.414Z,1478842906.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:46.431Z,1478842906.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:46.815Z,1478842906.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:46.834Z,1478842906.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:47.218Z,1478842907.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:47.238Z,1478842907.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:47.608Z,1478842907.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:47.628Z,1478842907.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:47.994Z,1478842907.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:48.021Z,1478842908.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:48.408Z,1478842908.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:48.429Z,1478842908.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:48.795Z,1478842908.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:48.865Z,1478842908.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:49.196Z,1478842909.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:49.259Z,1478842909.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:49.624Z,1478842909.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:49.640Z,1478842909.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:50.019Z,1478842910.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:50.078Z,1478842910.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:50.420Z,1478842910.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:50.435Z,1478842910.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:50.795Z,1478842910.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:50.834Z,1478842910.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:51.194Z,1478842911.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:51.235Z,1478842911.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:51.603Z,1478842911.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:51.636Z,1478842911.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:51.994Z,1478842911.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:52.010Z,1478842912.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:52.408Z,1478842912.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:52.441Z,1478842912.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:52.812Z,1478842912.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:52.839Z,1478842912.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:53.208Z,1478842913.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:53.224Z,1478842913.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:53.606Z,1478842913.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:53.622Z,1478842913.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:54.005Z,1478842914.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:54.020Z,1478842914.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:54.399Z,1478842914.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:54.431Z,1478842914.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:54.804Z,1478842914.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:54.833Z,1478842914.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:55.206Z,1478842915.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:55.222Z,1478842915.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:55.618Z,1478842915.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:55.634Z,1478842915.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:56.015Z,1478842916.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:56.031Z,1478842916.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:56.416Z,1478842916.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:56.431Z,1478842916.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:56.794Z,1478842916.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:56.826Z,1478842916.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:57.194Z,1478842917.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:57.226Z,1478842917.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:57.603Z,1478842917.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:57.632Z,1478842917.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:57.994Z,1478842917.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:58.033Z,1478842918.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:58.416Z,1478842918.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:58.432Z,1478842918.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:58.820Z,1478842918.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:58.836Z,1478842918.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:59.224Z,1478842919.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:59.240Z,1478842919.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:59.602Z,1478842919.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:41:59.634Z,1478842919.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:41:59.994Z,1478842919.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:00.041Z,1478842920.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:00.395Z,1478842920.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:00.410Z,1478842920.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:00.799Z,1478842920.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:00.815Z,1478842920.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:01.206Z,1478842921.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:01.221Z,1478842921.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:01.620Z,1478842921.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:01.649Z,1478842921.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:02.016Z,1478842922.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:02.041Z,1478842922.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:02.416Z,1478842922.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:02.440Z,1478842922.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:02.799Z,1478842922.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:02.814Z,1478842922.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:03.205Z,1478842923.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:03.277Z,1478842923.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:03.613Z,1478842923.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:03.628Z,1478842923.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:06.935Z,1478842926.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:07.000Z,1478842927.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:07.116Z,1478842927.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:07.156Z,1478842927.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:07.474Z,1478842927.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:07.529Z,1478842927.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:07.864Z,1478842927.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:07.916Z,1478842927.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:08.247Z,1478842928.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:08.279Z,1478842928.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:08.649Z,1478842928.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:08.681Z,1478842928.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:09.046Z,1478842929.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:09.075Z,1478842929.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:09.480Z,1478842929.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:09.504Z,1478842929.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:09.860Z,1478842929.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:09.888Z,1478842929.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:10.261Z,1478842930.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:10.293Z,1478842930.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:10.650Z,1478842930.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:10.667Z,1478842930.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:11.066Z,1478842931.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:11.108Z,1478842931.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:11.457Z,1478842931.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:11.478Z,1478842931.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:11.854Z,1478842931.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:11.869Z,1478842931.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:12.260Z,1478842932.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:12.282Z,1478842932.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:12.664Z,1478842932.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:12.680Z,1478842932.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:13.067Z,1478842933.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:13.108Z,1478842933.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:13.450Z,1478842933.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:13.482Z,1478842933.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:13.846Z,1478842933.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:13.870Z,1478842933.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:14.246Z,1478842934.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:14.262Z,1478842934.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:14.648Z,1478842934.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:14.693Z,1478842934.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:15.077Z,1478842935.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:15.102Z,1478842935.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:15.460Z,1478842935.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:15.493Z,1478842935.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:15.864Z,1478842935.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:15.889Z,1478842935.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:16.260Z,1478842936.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:16.292Z,1478842936.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:16.650Z,1478842936.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:16.666Z,1478842936.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:17.060Z,1478842937.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:17.100Z,1478842937.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:17.459Z,1478842937.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:17.535Z,1478842937.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:17.849Z,1478842937.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:17.873Z,1478842937.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:18.260Z,1478842938.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:18.275Z,1478842938.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:18.663Z,1478842938.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:18.678Z,1478842938.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:19.085Z,1478842939.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:19.133Z,1478842939.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:19.456Z,1478842939.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:19.485Z,1478842939.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:19.857Z,1478842939.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:19.933Z,1478842939.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:20.254Z,1478842940.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:20.285Z,1478842940.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:20.656Z,1478842940.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:20.683Z,1478842940.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:21.048Z,1478842941.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:21.099Z,1478842941.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:21.469Z,1478842941.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:21.489Z,1478842941.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:21.867Z,1478842941.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:21.920Z,1478842941.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:22.266Z,1478842942.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:22.317Z,1478842942.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:22.655Z,1478842942.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:22.671Z,1478842942.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:23.054Z,1478842943.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:23.077Z,1478842943.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:23.470Z,1478842943.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:23.486Z,1478842943.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:23.846Z,1478842943.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:23.882Z,1478842943.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:24.268Z,1478842944.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:24.289Z,1478842944.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:24.664Z,1478842944.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:24.692Z,1478842944.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:25.074Z,1478842945.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:25.090Z,1478842945.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:25.446Z,1478842945.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:25.487Z,1478842945.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:25.846Z,1478842945.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:25.874Z,1478842945.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:26.246Z,1478842946.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:26.277Z,1478842946.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:26.647Z,1478842946.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:26.689Z,1478842946.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:27.063Z,1478842947.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:27.097Z,1478842947.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:27.464Z,1478842947.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:27.501Z,1478842947.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:27.860Z,1478842947.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:27.902Z,1478842947.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:28.260Z,1478842948.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:28.276Z,1478842948.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:28.652Z,1478842948.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:28.668Z,1478842948.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:29.058Z,1478842949.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:29.083Z,1478842949.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:29.454Z,1478842949.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:29.477Z,1478842949.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:29.849Z,1478842949.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:29.881Z,1478842949.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:30.268Z,1478842950.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:30.289Z,1478842950.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:30.667Z,1478842950.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:30.691Z,1478842950.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:31.067Z,1478842951.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:31.105Z,1478842951.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:31.447Z,1478842951.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:31.470Z,1478842951.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:31.850Z,1478842951.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:31.884Z,1478842951.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:32.247Z,1478842952.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:32.263Z,1478842952.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:32.655Z,1478842952.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:32.670Z,1478842952.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:33.086Z,1478842953.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:33.116Z,1478842953.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:33.464Z,1478842953.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:33.501Z,1478842953.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:33.540Z,1478842953.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:33.868Z,1478842953.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:33.895Z,1478842953.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:34.264Z,1478842954.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:34.325Z,1478842954.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:34.336Z,1478842954.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:34.649Z,1478842954.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:34.705Z,1478842954.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:35.054Z,1478842955.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:35.072Z,1478842955.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:35.463Z,1478842955.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:35.517Z,1478842955.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:35.848Z,1478842955.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:35.881Z,1478842955.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:36.266Z,1478842956.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:36.317Z,1478842956.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:36.665Z,1478842956.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:36.688Z,1478842956.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:37.067Z,1478842957.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:37.125Z,1478842957.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:37.446Z,1478842957.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:37.473Z,1478842957.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:37.846Z,1478842957.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:37.884Z,1478842957.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:38.247Z,1478842958.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:38.283Z,1478842958.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:38.647Z,1478842958.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:38.663Z,1478842958.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:39.048Z,1478842959.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:39.083Z,1478842959.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:39.468Z,1478842959.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:39.493Z,1478842959.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:39.860Z,1478842959.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:39.889Z,1478842959.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:40.264Z,1478842960.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:40.300Z,1478842960.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:40.653Z,1478842960.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:40.690Z,1478842960.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:41.046Z,1478842961.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:41.061Z,1478842961.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:41.455Z,1478842961.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:41.474Z,1478842961.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:41.849Z,1478842961.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:41.868Z,1478842961.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:42.260Z,1478842962.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:42.305Z,1478842962.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:42.660Z,1478842962.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:42.680Z,1478842962.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:43.062Z,1478842963.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:43.079Z,1478842963.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:43.449Z,1478842963.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:43.504Z,1478842963.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:43.848Z,1478842963.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:43.877Z,1478842963.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:44.254Z,1478842964.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:44.274Z,1478842964.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:44.659Z,1478842964.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:44.679Z,1478842964.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:45.054Z,1478842965.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:45.087Z,1478842965.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:45.464Z,1478842965.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:45.490Z,1478842965.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:45.869Z,1478842965.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:45.893Z,1478842965.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:46.275Z,1478842966.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:46.290Z,1478842966.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:46.647Z,1478842966.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:46.692Z,1478842966.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:47.067Z,1478842967.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:47.122Z,1478842967.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:47.461Z,1478842967.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:47.495Z,1478842967.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:47.846Z,1478842967.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:47.877Z,1478842967.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:48.270Z,1478842968.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:48.317Z,1478842968.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:48.670Z,1478842968.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:48.679Z,1478842968.679 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T05:42:48.721Z,1478842968.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:49.072Z,1478842969.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:49.141Z,1478842969.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:49.465Z,1478842969.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:49.492Z,1478842969.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:49.846Z,1478842969.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:49.913Z,1478842969.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:50.249Z,1478842970.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:50.266Z,1478842970.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:50.650Z,1478842970.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:50.703Z,1478842970.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:51.051Z,1478842971.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:51.100Z,1478842971.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:51.468Z,1478842971.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:51.496Z,1478842971.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:51.869Z,1478842971.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:51.902Z,1478842971.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:52.262Z,1478842972.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:52.290Z,1478842972.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:52.651Z,1478842972.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:52.666Z,1478842972.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:53.053Z,1478842973.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:53.082Z,1478842973.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:53.460Z,1478842973.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:53.478Z,1478842973.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:53.860Z,1478842973.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:53.876Z,1478842973.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:54.261Z,1478842974.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:54.283Z,1478842974.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:54.664Z,1478842974.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:54.694Z,1478842974.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:55.065Z,1478842975.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:55.081Z,1478842975.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:55.460Z,1478842975.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:55.492Z,1478842975.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:55.848Z,1478842975.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:55.874Z,1478842975.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:56.250Z,1478842976.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:56.293Z,1478842976.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:56.647Z,1478842976.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:56.667Z,1478842976.667 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T05:42:56.686Z,1478842976.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:57.047Z,1478842977.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:57.075Z,1478842977.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:57.468Z,1478842977.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:57.497Z,1478842977.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:57.871Z,1478842977.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:57.887Z,1478842977.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:58.265Z,1478842978.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:58.301Z,1478842978.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:58.652Z,1478842978.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:58.678Z,1478842978.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:59.048Z,1478842979.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:59.082Z,1478842979.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:59.455Z,1478842979.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:59.492Z,1478842979.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:42:59.851Z,1478842979.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:42:59.886Z,1478842979.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:00.261Z,1478842980.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:00.289Z,1478842980.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:00.668Z,1478842980.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:00.692Z,1478842980.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:01.064Z,1478842981.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:01.105Z,1478842981.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:01.451Z,1478842981.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:01.476Z,1478842981.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:01.850Z,1478842981.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:01.885Z,1478842981.885 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:01.885Z,1478842981.885 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2016-11-11T05:43:01.885Z,1478842981.885 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:43:01.892Z,1478842981.892 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:01.892Z,1478842981.892 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2016-11-11T05:43:01.892Z,1478842981.892 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T05:43:01.894Z,1478842981.894 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:01.894Z,1478842981.894 [DeadReckonWithRespectToWater] Software Fault, FailCount= 19
2016-11-11T05:43:01.894Z,1478842981.894 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T05:43:01.900Z,1478842981.900 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:01.901Z,1478842981.901 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2016-11-11T05:43:01.901Z,1478842981.901 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:43:01.903Z,1478842981.903 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:01.903Z,1478842981.903 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 19
2016-11-11T05:43:01.903Z,1478842981.903 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:43:01.928Z,1478842981.928 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:43:01.929Z,1478842981.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T05:43:01.929Z,1478842981.929 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T05:43:01.929Z,1478842981.929 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:43:01.929Z,1478842981.930 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:43:02.255Z,1478842982.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:02.283Z,1478842982.283 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:43:02.283Z,1478842982.283 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2016-11-11T05:43:02.284Z,1478842982.284 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T05:43:02.284Z,1478842982.284 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2016-11-11T05:43:02.284Z,1478842982.284 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T05:43:02.284Z,1478842982.284 [DeadReckonWithRespectToWater] No Fault, FailCount= 19
2016-11-11T05:43:02.285Z,1478842982.285 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:43:02.285Z,1478842982.285 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2016-11-11T05:43:02.286Z,1478842982.286 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:43:02.286Z,1478842982.286 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 19
2016-11-11T05:43:02.666Z,1478842982.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:02.681Z,1478842982.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:43:02.681Z,1478842982.681 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:43:02.681Z,1478842982.681 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:43:02.682Z,1478842982.682 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T05:43:02.682Z,1478842982.682 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:43:02.683Z,1478842982.683 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:43:02.683Z,1478842982.683 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T05:43:02.684Z,1478842982.684 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:43:02.684Z,1478842982.684 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:43:02.684Z,1478842982.684 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:43:02.685Z,1478842982.685 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:43:02.685Z,1478842982.685 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:43:02.686Z,1478842982.685 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:43:02.686Z,1478842982.686 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:43:02.686Z,1478842982.686 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:43:02.688Z,1478842982.688 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T05:43:02.688Z,1478842982.688 [Default:CheckIn:C.Wait] Stopped
2016-11-11T05:43:02.688Z,1478842982.688 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T05:43:02.688Z,1478842982.688 [Default:CheckIn:D] Running Loop=1
2016-11-11T05:43:03.045Z,1478842983.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:03.125Z,1478842983.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:03.135Z,1478842983.135 [Default:CheckIn:D] Stopped
2016-11-11T05:43:03.135Z,1478842983.135 [Default:CheckIn:E] Running Loop=1
2016-11-11T05:43:03.466Z,1478842983.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:03.496Z,1478842983.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:03.502Z,1478842983.502 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 53.030408 min 
2016-11-11T05:43:03.502Z,1478842983.502 [Default:CheckIn:E] Stopped
2016-11-11T05:43:03.502Z,1478842983.502 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T05:43:03.502Z,1478842983.502 [Default:CheckIn] Stopped
2016-11-11T05:43:03.502Z,1478842983.502 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T05:43:03.502Z,1478842983.502 [Default:CheckIn](INFO): Running loop #6
2016-11-11T05:43:03.502Z,1478842983.503 [Default:CheckIn] Running Loop=6
2016-11-11T05:43:03.503Z,1478842983.503 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T05:43:03.503Z,1478842983.503 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T05:43:03.872Z,1478842983.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:03.923Z,1478842983.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:08.201Z,1478842988.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:08.236Z,1478842988.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:08.372Z,1478842988.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:08.426Z,1478842988.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:08.748Z,1478842988.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:08.807Z,1478842988.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:09.151Z,1478842989.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:09.199Z,1478842989.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:09.549Z,1478842989.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:09.582Z,1478842989.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:09.949Z,1478842989.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:09.974Z,1478842989.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:10.353Z,1478842990.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:10.392Z,1478842990.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:10.754Z,1478842990.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:10.797Z,1478842990.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:11.154Z,1478842991.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:11.187Z,1478842991.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:11.545Z,1478842991.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:11.596Z,1478842991.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:11.944Z,1478842991.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:11.989Z,1478842991.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:12.347Z,1478842992.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:12.412Z,1478842992.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:12.745Z,1478842992.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:12.804Z,1478842992.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:13.140Z,1478842993.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:13.190Z,1478842993.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:13.565Z,1478842993.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:13.604Z,1478842993.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:13.958Z,1478842993.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:14.002Z,1478842994.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:14.352Z,1478842994.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:14.368Z,1478842994.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:14.746Z,1478842994.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:14.799Z,1478842994.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:15.145Z,1478842995.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:15.161Z,1478842995.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:15.567Z,1478842995.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:15.595Z,1478842995.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:15.938Z,1478842995.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:15.965Z,1478842995.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:16.359Z,1478842996.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:16.375Z,1478842996.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:16.759Z,1478842996.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:16.813Z,1478842996.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:17.160Z,1478842997.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:17.181Z,1478842997.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:17.538Z,1478842997.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:17.584Z,1478842997.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:17.938Z,1478842997.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:17.953Z,1478842997.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:18.338Z,1478842998.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:18.386Z,1478842998.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:18.744Z,1478842998.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:18.769Z,1478842998.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:19.163Z,1478842999.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:19.220Z,1478842999.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:19.562Z,1478842999.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:19.615Z,1478842999.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:19.962Z,1478842999.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:19.994Z,1478842999.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:20.362Z,1478843000.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:20.394Z,1478843000.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:20.739Z,1478843000.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:20.833Z,1478843000.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:21.147Z,1478843001.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:21.180Z,1478843001.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:21.549Z,1478843001.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:21.609Z,1478843001.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:21.952Z,1478843001.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:21.989Z,1478843001.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:22.354Z,1478843002.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:22.410Z,1478843002.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:22.762Z,1478843002.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:22.840Z,1478843002.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:23.154Z,1478843003.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:23.201Z,1478843003.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:23.548Z,1478843003.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:23.584Z,1478843003.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:23.945Z,1478843003.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:23.974Z,1478843003.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:24.349Z,1478843004.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:24.377Z,1478843004.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:24.751Z,1478843004.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:24.779Z,1478843004.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:25.140Z,1478843005.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:25.175Z,1478843005.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:25.562Z,1478843005.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:25.583Z,1478843005.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:25.959Z,1478843005.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:25.975Z,1478843005.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:26.367Z,1478843006.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:26.384Z,1478843006.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:26.738Z,1478843006.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:26.774Z,1478843006.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:27.138Z,1478843007.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:27.170Z,1478843007.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:27.539Z,1478843007.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:27.555Z,1478843007.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:27.939Z,1478843007.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:27.976Z,1478843007.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:28.356Z,1478843008.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:28.393Z,1478843008.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:28.756Z,1478843008.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:28.790Z,1478843008.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:29.152Z,1478843009.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:29.186Z,1478843009.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:29.546Z,1478843009.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:29.574Z,1478843009.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:29.944Z,1478843009.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:29.964Z,1478843009.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:30.349Z,1478843010.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:30.364Z,1478843010.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:30.740Z,1478843010.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:30.773Z,1478843010.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:31.154Z,1478843011.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:31.170Z,1478843011.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:31.552Z,1478843011.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:31.578Z,1478843011.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:31.959Z,1478843011.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:31.975Z,1478843011.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:32.343Z,1478843012.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:32.365Z,1478843012.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:32.752Z,1478843012.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:32.767Z,1478843012.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:33.143Z,1478843013.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:33.167Z,1478843013.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:33.557Z,1478843013.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:33.572Z,1478843013.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:33.945Z,1478843013.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:33.985Z,1478843013.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:34.358Z,1478843014.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:34.382Z,1478843014.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:34.760Z,1478843014.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:34.833Z,1478843014.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:35.152Z,1478843015.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:35.186Z,1478843015.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:35.541Z,1478843015.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:35.589Z,1478843015.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:35.943Z,1478843015.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:35.959Z,1478843015.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:36.347Z,1478843016.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:36.395Z,1478843016.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:36.741Z,1478843016.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:36.760Z,1478843016.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:37.149Z,1478843017.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:37.202Z,1478843017.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:37.564Z,1478843017.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:37.600Z,1478843017.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:37.952Z,1478843017.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:37.968Z,1478843017.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:38.344Z,1478843018.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:38.360Z,1478843018.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:38.740Z,1478843018.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:38.777Z,1478843018.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:39.138Z,1478843019.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:39.163Z,1478843019.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:39.539Z,1478843019.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:39.571Z,1478843019.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:39.938Z,1478843019.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:39.974Z,1478843019.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:40.356Z,1478843020.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:40.377Z,1478843020.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:40.759Z,1478843020.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:40.774Z,1478843020.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:41.166Z,1478843021.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:41.189Z,1478843021.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:41.538Z,1478843021.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:41.573Z,1478843021.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:41.938Z,1478843021.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:41.973Z,1478843021.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:42.338Z,1478843022.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:42.370Z,1478843022.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:42.742Z,1478843022.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:42.769Z,1478843022.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:43.138Z,1478843023.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:43.169Z,1478843023.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:43.556Z,1478843023.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:43.599Z,1478843023.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:43.952Z,1478843023.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:43.988Z,1478843023.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:44.352Z,1478843024.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:44.386Z,1478843024.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:44.746Z,1478843024.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:44.779Z,1478843024.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:45.138Z,1478843025.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:45.154Z,1478843025.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:45.538Z,1478843025.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:45.553Z,1478843025.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:45.944Z,1478843025.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:45.960Z,1478843025.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:46.345Z,1478843026.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:46.365Z,1478843026.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:46.752Z,1478843026.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:46.767Z,1478843026.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:47.156Z,1478843027.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:47.177Z,1478843027.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:47.556Z,1478843027.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:47.572Z,1478843027.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:47.945Z,1478843027.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:47.960Z,1478843027.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:48.352Z,1478843028.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:48.368Z,1478843028.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:48.746Z,1478843028.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:48.774Z,1478843028.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:49.144Z,1478843029.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:49.213Z,1478843029.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:49.557Z,1478843029.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:49.614Z,1478843029.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:49.952Z,1478843029.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:50.018Z,1478843030.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:50.352Z,1478843030.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:50.389Z,1478843030.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:50.742Z,1478843030.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:50.794Z,1478843030.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:51.144Z,1478843031.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:51.198Z,1478843031.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:51.541Z,1478843031.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:51.565Z,1478843031.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:51.944Z,1478843031.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:51.973Z,1478843031.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:52.358Z,1478843032.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:52.374Z,1478843032.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:52.759Z,1478843032.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:52.774Z,1478843032.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:53.163Z,1478843033.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:53.181Z,1478843033.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:53.538Z,1478843033.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:53.570Z,1478843033.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:53.938Z,1478843033.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:53.970Z,1478843033.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:54.338Z,1478843034.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:54.354Z,1478843034.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:54.741Z,1478843034.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:54.779Z,1478843034.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:55.137Z,1478843035.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:55.157Z,1478843035.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:55.552Z,1478843035.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:55.584Z,1478843035.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:55.952Z,1478843035.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:55.980Z,1478843035.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:56.352Z,1478843036.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:56.367Z,1478843036.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:56.741Z,1478843036.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:56.765Z,1478843036.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:57.145Z,1478843037.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:57.161Z,1478843037.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:57.552Z,1478843037.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:57.568Z,1478843037.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:57.950Z,1478843037.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:57.973Z,1478843037.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:58.358Z,1478843038.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:58.373Z,1478843038.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:58.757Z,1478843038.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:58.772Z,1478843038.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:59.158Z,1478843039.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:59.174Z,1478843039.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:59.538Z,1478843039.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:59.553Z,1478843039.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:43:59.942Z,1478843039.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:43:59.958Z,1478843039.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:00.348Z,1478843040.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:00.364Z,1478843040.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:00.744Z,1478843040.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:00.765Z,1478843040.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:01.152Z,1478843041.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:01.168Z,1478843041.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:01.558Z,1478843041.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:01.574Z,1478843041.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:01.961Z,1478843041.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:01.981Z,1478843041.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:02.338Z,1478843042.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:02.373Z,1478843042.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:02.751Z,1478843042.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:02.768Z,1478843042.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:03.138Z,1478843043.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:03.221Z,1478843043.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:03.540Z,1478843043.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:03.581Z,1478843043.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:03.947Z,1478843043.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:03.987Z,1478843043.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:07.396Z,1478843047.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:07.445Z,1478843047.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:07.560Z,1478843047.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:07.593Z,1478843047.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:07.928Z,1478843047.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:07.998Z,1478843047.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:08.319Z,1478843048.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:08.365Z,1478843048.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:08.717Z,1478843048.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:08.733Z,1478843048.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:09.117Z,1478843049.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:09.137Z,1478843049.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:09.514Z,1478843049.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:09.539Z,1478843049.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:09.917Z,1478843049.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:09.934Z,1478843049.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:10.324Z,1478843050.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:10.345Z,1478843050.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:10.721Z,1478843050.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:10.738Z,1478843050.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:11.125Z,1478843051.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:11.142Z,1478843051.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:11.512Z,1478843051.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:11.553Z,1478843051.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:11.910Z,1478843051.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:11.938Z,1478843051.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:12.310Z,1478843052.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:12.346Z,1478843052.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:12.716Z,1478843052.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:12.754Z,1478843052.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:13.110Z,1478843053.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:13.145Z,1478843053.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:13.520Z,1478843053.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:13.552Z,1478843053.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:13.924Z,1478843053.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:13.962Z,1478843053.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:14.320Z,1478843054.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:14.348Z,1478843054.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:14.713Z,1478843054.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:14.733Z,1478843054.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:15.118Z,1478843055.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:15.133Z,1478843055.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:15.515Z,1478843055.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:15.543Z,1478843055.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:15.918Z,1478843055.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:15.933Z,1478843055.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:16.332Z,1478843056.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:16.353Z,1478843056.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:16.729Z,1478843056.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:16.748Z,1478843056.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:17.120Z,1478843057.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:17.150Z,1478843057.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:17.521Z,1478843057.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:17.552Z,1478843057.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:17.914Z,1478843057.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:17.930Z,1478843057.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:18.312Z,1478843058.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:18.328Z,1478843058.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:18.717Z,1478843058.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:18.737Z,1478843058.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:19.132Z,1478843059.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:19.148Z,1478843059.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:19.524Z,1478843059.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:19.543Z,1478843059.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:19.927Z,1478843059.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:19.949Z,1478843059.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:20.313Z,1478843060.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:20.381Z,1478843060.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:20.710Z,1478843060.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:20.765Z,1478843060.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:21.109Z,1478843061.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:21.129Z,1478843061.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:21.514Z,1478843061.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:21.542Z,1478843061.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:21.917Z,1478843061.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:21.971Z,1478843061.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:22.324Z,1478843062.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:22.339Z,1478843062.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:22.725Z,1478843062.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:22.773Z,1478843062.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:23.124Z,1478843063.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:23.178Z,1478843063.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:23.514Z,1478843063.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:23.530Z,1478843063.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:23.910Z,1478843063.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:23.933Z,1478843063.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:24.316Z,1478843064.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:24.332Z,1478843064.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:24.717Z,1478843064.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:24.732Z,1478843064.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:25.124Z,1478843065.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:25.140Z,1478843065.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:25.524Z,1478843065.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:25.539Z,1478843065.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:25.927Z,1478843065.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:25.970Z,1478843065.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:26.317Z,1478843066.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:26.333Z,1478843066.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:26.716Z,1478843066.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:26.732Z,1478843066.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:27.117Z,1478843067.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:27.133Z,1478843067.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:27.515Z,1478843067.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:27.549Z,1478843067.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:27.917Z,1478843067.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:27.932Z,1478843067.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:28.330Z,1478843068.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:28.353Z,1478843068.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:28.727Z,1478843068.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:28.742Z,1478843068.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:29.130Z,1478843069.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:29.190Z,1478843069.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:29.526Z,1478843069.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:29.549Z,1478843069.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:29.910Z,1478843069.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:29.942Z,1478843069.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:30.312Z,1478843070.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:30.340Z,1478843070.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:30.710Z,1478843070.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:30.746Z,1478843070.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:31.128Z,1478843071.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:31.150Z,1478843071.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:31.539Z,1478843071.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:31.555Z,1478843071.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:31.928Z,1478843071.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:31.978Z,1478843071.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:32.310Z,1478843072.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:32.349Z,1478843072.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:32.710Z,1478843072.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:32.725Z,1478843072.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:33.125Z,1478843073.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:33.141Z,1478843073.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:33.515Z,1478843073.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:33.549Z,1478843073.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:33.917Z,1478843073.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:33.932Z,1478843073.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:34.331Z,1478843074.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:34.347Z,1478843074.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:34.731Z,1478843074.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:34.747Z,1478843074.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:35.128Z,1478843075.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:35.165Z,1478843075.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:35.514Z,1478843075.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:35.565Z,1478843075.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:35.910Z,1478843075.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:35.945Z,1478843075.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:36.312Z,1478843076.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:36.361Z,1478843076.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:36.710Z,1478843076.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:36.749Z,1478843076.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:37.124Z,1478843077.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:37.169Z,1478843077.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:37.524Z,1478843077.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:37.569Z,1478843077.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:37.932Z,1478843077.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:37.968Z,1478843077.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:38.312Z,1478843078.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:38.345Z,1478843078.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:38.717Z,1478843078.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:38.732Z,1478843078.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:39.125Z,1478843079.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:39.145Z,1478843079.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:39.516Z,1478843079.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:39.549Z,1478843079.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:39.917Z,1478843079.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:39.933Z,1478843079.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:40.331Z,1478843080.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:40.346Z,1478843080.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:40.729Z,1478843080.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:40.757Z,1478843080.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:41.146Z,1478843081.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:41.206Z,1478843081.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:41.510Z,1478843081.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:41.537Z,1478843081.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:41.910Z,1478843081.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:41.945Z,1478843081.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:42.312Z,1478843082.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:42.340Z,1478843082.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:42.718Z,1478843082.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:42.750Z,1478843082.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:43.139Z,1478843083.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:43.206Z,1478843083.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:43.524Z,1478843083.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:43.557Z,1478843083.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:43.924Z,1478843083.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:43.951Z,1478843083.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:44.310Z,1478843084.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:44.353Z,1478843084.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:44.714Z,1478843084.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:44.730Z,1478843084.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:45.112Z,1478843085.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:45.140Z,1478843085.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:45.515Z,1478843085.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:45.543Z,1478843085.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:45.910Z,1478843085.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:45.942Z,1478843085.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:46.328Z,1478843086.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:46.360Z,1478843086.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:46.732Z,1478843086.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:46.748Z,1478843086.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:47.124Z,1478843087.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:47.160Z,1478843087.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:47.511Z,1478843087.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:47.526Z,1478843087.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:47.910Z,1478843087.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:47.926Z,1478843087.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:48.317Z,1478843088.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:48.332Z,1478843088.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:48.717Z,1478843088.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:48.741Z,1478843088.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:49.132Z,1478843089.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:49.151Z,1478843089.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:49.532Z,1478843089.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:49.613Z,1478843089.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:49.932Z,1478843089.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:49.948Z,1478843089.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:50.310Z,1478843090.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:50.346Z,1478843090.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:50.710Z,1478843090.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:50.798Z,1478843090.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:51.110Z,1478843091.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:51.129Z,1478843091.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:51.521Z,1478843091.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:51.562Z,1478843091.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:51.910Z,1478843091.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:51.925Z,1478843091.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:52.324Z,1478843092.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:52.367Z,1478843092.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:52.728Z,1478843092.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:52.760Z,1478843092.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:53.120Z,1478843093.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:53.135Z,1478843093.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:53.521Z,1478843093.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:53.541Z,1478843093.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:53.913Z,1478843093.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:53.942Z,1478843093.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:54.321Z,1478843094.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:54.337Z,1478843094.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:54.719Z,1478843094.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:54.742Z,1478843094.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:55.133Z,1478843095.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:55.188Z,1478843095.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:55.530Z,1478843095.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:55.546Z,1478843095.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:55.931Z,1478843095.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:55.953Z,1478843095.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:56.310Z,1478843096.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:56.338Z,1478843096.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:56.710Z,1478843096.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:56.745Z,1478843096.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:57.166Z,1478843097.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:57.201Z,1478843097.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:57.517Z,1478843097.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:57.549Z,1478843097.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:57.910Z,1478843097.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:57.925Z,1478843097.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:58.324Z,1478843098.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:58.353Z,1478843098.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:58.724Z,1478843098.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:58.813Z,1478843098.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:59.130Z,1478843099.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:59.146Z,1478843099.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:59.512Z,1478843099.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:59.544Z,1478843099.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:44:59.913Z,1478843099.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:44:59.936Z,1478843099.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:00.319Z,1478843100.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:00.339Z,1478843100.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:00.717Z,1478843100.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:00.791Z,1478843100.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:01.135Z,1478843101.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:01.152Z,1478843101.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:01.524Z,1478843101.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:01.558Z,1478843101.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:01.924Z,1478843101.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:01.951Z,1478843101.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:02.314Z,1478843102.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:02.330Z,1478843102.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:02.709Z,1478843102.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:02.790Z,1478843102.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:03.112Z,1478843103.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:03.131Z,1478843103.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:03.516Z,1478843103.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:03.540Z,1478843103.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:03.917Z,1478843103.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:03.993Z,1478843103.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:04.333Z,1478843104.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:04.348Z,1478843104.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:07.760Z,1478843107.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:07.831Z,1478843107.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:07.932Z,1478843107.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:07.980Z,1478843107.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:08.068Z,1478843108.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:08.286Z,1478843108.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:08.337Z,1478843108.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:08.681Z,1478843108.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:08.741Z,1478843108.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:08.864Z,1478843108.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:09.098Z,1478843109.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:09.162Z,1478843109.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:09.492Z,1478843109.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:09.516Z,1478843109.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:09.878Z,1478843109.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:09.913Z,1478843109.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:10.299Z,1478843110.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:10.314Z,1478843110.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:10.700Z,1478843110.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:10.722Z,1478843110.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:11.102Z,1478843111.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:11.153Z,1478843111.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:11.485Z,1478843111.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:11.501Z,1478843111.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:11.886Z,1478843111.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:11.901Z,1478843111.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:12.285Z,1478843112.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:12.312Z,1478843112.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:12.685Z,1478843112.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:12.701Z,1478843112.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:13.097Z,1478843113.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:13.116Z,1478843113.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:13.499Z,1478843113.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:13.515Z,1478843113.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:13.896Z,1478843113.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:13.911Z,1478843113.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:14.289Z,1478843114.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:14.305Z,1478843114.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:14.682Z,1478843114.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:14.760Z,1478843114.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:15.078Z,1478843115.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:15.093Z,1478843115.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:15.485Z,1478843115.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:15.521Z,1478843115.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:15.881Z,1478843115.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:15.901Z,1478843115.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:16.296Z,1478843116.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:16.328Z,1478843116.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:16.692Z,1478843116.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:16.765Z,1478843116.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:17.096Z,1478843117.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:17.116Z,1478843117.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:17.489Z,1478843117.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:17.509Z,1478843117.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:17.881Z,1478843117.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:17.905Z,1478843117.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:18.280Z,1478843118.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:18.309Z,1478843118.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:18.682Z,1478843118.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:18.726Z,1478843118.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:19.138Z,1478843119.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:19.166Z,1478843119.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:19.495Z,1478843119.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:19.529Z,1478843119.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:19.899Z,1478843119.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:19.915Z,1478843119.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:20.282Z,1478843120.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:20.310Z,1478843120.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:20.678Z,1478843120.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:20.737Z,1478843120.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:21.084Z,1478843121.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:21.141Z,1478843121.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:21.496Z,1478843121.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:21.513Z,1478843121.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:21.882Z,1478843121.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:21.931Z,1478843121.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:22.292Z,1478843122.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:22.325Z,1478843122.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:22.696Z,1478843122.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:22.745Z,1478843122.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:23.106Z,1478843123.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:23.169Z,1478843123.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:23.479Z,1478843123.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:23.515Z,1478843123.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:23.879Z,1478843123.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:23.913Z,1478843123.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:24.282Z,1478843124.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:24.321Z,1478843124.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:24.678Z,1478843124.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:24.707Z,1478843124.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:25.118Z,1478843125.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:25.155Z,1478843125.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:25.493Z,1478843125.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:25.520Z,1478843125.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:25.892Z,1478843125.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:25.909Z,1478843125.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:26.285Z,1478843126.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:26.306Z,1478843126.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:26.682Z,1478843126.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:26.760Z,1478843126.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:27.078Z,1478843127.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:27.104Z,1478843127.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:27.481Z,1478843127.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:27.522Z,1478843127.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:27.878Z,1478843127.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:27.906Z,1478843127.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:28.292Z,1478843128.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:28.326Z,1478843128.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:28.712Z,1478843128.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:28.775Z,1478843128.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:29.092Z,1478843129.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:29.124Z,1478843129.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:29.481Z,1478843129.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:29.497Z,1478843129.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:29.881Z,1478843129.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:29.901Z,1478843129.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:30.287Z,1478843130.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:30.303Z,1478843130.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:30.698Z,1478843130.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:30.756Z,1478843130.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:31.094Z,1478843131.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:31.110Z,1478843131.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:31.492Z,1478843131.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:31.521Z,1478843131.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:31.898Z,1478843131.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:31.913Z,1478843131.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:32.289Z,1478843132.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:32.309Z,1478843132.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:32.693Z,1478843132.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:32.757Z,1478843132.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:33.078Z,1478843133.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:33.094Z,1478843133.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:33.488Z,1478843133.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:33.516Z,1478843133.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:33.885Z,1478843133.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:33.905Z,1478843133.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:34.297Z,1478843134.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:34.314Z,1478843134.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:34.699Z,1478843134.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:34.714Z,1478843134.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:35.096Z,1478843135.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:35.169Z,1478843135.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:35.478Z,1478843135.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:35.505Z,1478843135.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:35.886Z,1478843135.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:35.901Z,1478843135.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:36.283Z,1478843136.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:36.337Z,1478843136.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:36.685Z,1478843136.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:36.700Z,1478843136.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:37.097Z,1478843137.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:37.149Z,1478843137.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:37.496Z,1478843137.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:37.544Z,1478843137.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:37.893Z,1478843137.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:37.909Z,1478843137.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:38.286Z,1478843138.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:38.301Z,1478843138.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:38.680Z,1478843138.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:38.708Z,1478843138.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:39.112Z,1478843139.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:39.143Z,1478843139.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:39.495Z,1478843139.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:39.517Z,1478843139.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:39.881Z,1478843139.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:39.904Z,1478843139.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:40.295Z,1478843140.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:40.311Z,1478843140.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:40.740Z,1478843140.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:40.759Z,1478843140.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:41.096Z,1478843141.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:41.120Z,1478843141.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:41.477Z,1478843141.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:41.509Z,1478843141.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:41.878Z,1478843141.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:41.913Z,1478843141.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:42.281Z,1478843142.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:42.320Z,1478843142.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:42.730Z,1478843142.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:42.754Z,1478843142.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:43.091Z,1478843143.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:43.124Z,1478843143.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:43.492Z,1478843143.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:43.524Z,1478843143.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:43.892Z,1478843143.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:43.920Z,1478843143.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:44.281Z,1478843144.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:44.301Z,1478843144.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:44.748Z,1478843144.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:44.784Z,1478843144.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:45.084Z,1478843145.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:45.100Z,1478843145.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:45.494Z,1478843145.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:45.509Z,1478843145.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:45.881Z,1478843145.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:45.913Z,1478843145.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:46.293Z,1478843146.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:46.310Z,1478843146.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:46.738Z,1478843146.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:46.753Z,1478843146.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:46.800Z,1478843146.800 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T05:45:47.099Z,1478843147.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:47.115Z,1478843147.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:47.478Z,1478843147.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:47.513Z,1478843147.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:47.878Z,1478843147.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:47.904Z,1478843147.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:48.284Z,1478843148.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:48.317Z,1478843148.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:48.678Z,1478843148.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:48.744Z,1478843148.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:49.101Z,1478843149.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:49.117Z,1478843149.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:49.496Z,1478843149.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:49.565Z,1478843149.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:49.891Z,1478843149.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:49.957Z,1478843149.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:50.278Z,1478843150.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:50.293Z,1478843150.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:50.682Z,1478843150.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:50.729Z,1478843150.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:51.092Z,1478843151.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:51.136Z,1478843151.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:51.485Z,1478843151.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:51.538Z,1478843151.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:51.878Z,1478843151.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:51.929Z,1478843151.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:52.288Z,1478843152.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:52.315Z,1478843152.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:52.696Z,1478843152.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:52.728Z,1478843152.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:53.100Z,1478843153.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:53.124Z,1478843153.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:53.478Z,1478843153.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:53.494Z,1478843153.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:53.882Z,1478843153.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:53.897Z,1478843153.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:54.316Z,1478843154.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:54.332Z,1478843154.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:54.700Z,1478843154.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:54.746Z,1478843154.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:55.094Z,1478843155.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:55.117Z,1478843155.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:55.493Z,1478843155.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:55.513Z,1478843155.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:55.897Z,1478843155.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:55.913Z,1478843155.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:56.290Z,1478843156.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:56.305Z,1478843156.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:56.709Z,1478843156.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:56.748Z,1478843156.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:57.078Z,1478843157.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:57.109Z,1478843157.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:57.485Z,1478843157.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:57.520Z,1478843157.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:57.878Z,1478843157.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:57.909Z,1478843157.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:58.296Z,1478843158.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:58.312Z,1478843158.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:58.702Z,1478843158.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:58.733Z,1478843158.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:59.092Z,1478843159.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:59.125Z,1478843159.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:59.477Z,1478843159.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:59.493Z,1478843159.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:45:59.878Z,1478843159.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:45:59.893Z,1478843159.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:00.285Z,1478843160.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:00.321Z,1478843160.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:00.702Z,1478843160.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:00.746Z,1478843160.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:01.092Z,1478843161.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:01.113Z,1478843161.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:01.496Z,1478843161.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:01.512Z,1478843161.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:01.892Z,1478843161.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:01.908Z,1478843161.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:02.289Z,1478843162.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:02.316Z,1478843162.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:02.689Z,1478843162.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:02.764Z,1478843162.764 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:02.764Z,1478843162.764 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2016-11-11T05:46:02.764Z,1478843162.764 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:46:02.766Z,1478843162.766 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:02.766Z,1478843162.766 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2016-11-11T05:46:02.766Z,1478843162.766 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-11T05:46:02.777Z,1478843162.777 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:02.777Z,1478843162.777 [DeadReckonWithRespectToWater] Software Fault, FailCount= 20
2016-11-11T05:46:02.777Z,1478843162.777 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-11T05:46:02.792Z,1478843162.792 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:02.792Z,1478843162.792 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2016-11-11T05:46:02.792Z,1478843162.792 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:46:02.794Z,1478843162.794 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:02.794Z,1478843162.794 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 20
2016-11-11T05:46:02.794Z,1478843162.794 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:46:02.824Z,1478843162.824 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:46:02.824Z,1478843162.824 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-11T05:46:02.825Z,1478843162.825 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-11T05:46:02.825Z,1478843162.825 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:46:02.825Z,1478843162.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:46:03.087Z,1478843163.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:03.142Z,1478843163.142 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:46:03.142Z,1478843163.142 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2016-11-11T05:46:03.142Z,1478843163.142 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-11T05:46:03.142Z,1478843163.142 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2016-11-11T05:46:03.147Z,1478843163.147 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-11T05:46:03.147Z,1478843163.147 [DeadReckonWithRespectToWater] No Fault, FailCount= 20
2016-11-11T05:46:03.148Z,1478843163.148 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:46:03.148Z,1478843163.148 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2016-11-11T05:46:03.149Z,1478843163.149 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:46:03.149Z,1478843163.149 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 20
2016-11-11T05:46:03.490Z,1478843163.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:03.499Z,1478843163.499 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T05:46:03.507Z,1478843163.507 [BPC1] Data Fault, FailCount= 1
2016-11-11T05:46:03.507Z,1478843163.507 [BPC1](ERROR): Data Fault
2016-11-11T05:46:03.522Z,1478843163.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:46:03.522Z,1478843163.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:46:03.523Z,1478843163.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:46:03.530Z,1478843163.530 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-11T05:46:03.530Z,1478843163.530 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:46:03.530Z,1478843163.530 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:46:03.531Z,1478843163.531 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-11T05:46:03.536Z,1478843163.536 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:46:03.536Z,1478843163.536 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:46:03.536Z,1478843163.536 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:46:03.537Z,1478843163.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:46:03.537Z,1478843163.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:46:03.538Z,1478843163.537 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:46:03.538Z,1478843163.538 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:46:03.538Z,1478843163.538 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:46:03.585Z,1478843163.585 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:46:03.886Z,1478843163.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:03.901Z,1478843163.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:04.292Z,1478843164.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:04.308Z,1478843164.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:04.693Z,1478843164.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:04.708Z,1478843164.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:04.748Z,1478843164.749 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:46:04.749Z,1478843164.749 [BPC1] No Fault, FailCount= 1
2016-11-11T05:46:08.064Z,1478843168.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:08.141Z,1478843168.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:08.233Z,1478843168.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:08.289Z,1478843168.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:08.590Z,1478843168.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:08.702Z,1478843168.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:08.994Z,1478843168.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:09.010Z,1478843169.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:09.393Z,1478843169.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:09.408Z,1478843169.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:09.793Z,1478843169.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:09.813Z,1478843169.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:10.204Z,1478843170.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:10.220Z,1478843170.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:10.604Z,1478843170.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:10.672Z,1478843170.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:11.010Z,1478843171.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:11.026Z,1478843171.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:11.394Z,1478843171.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:11.420Z,1478843171.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:11.789Z,1478843171.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:11.825Z,1478843171.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:12.193Z,1478843172.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:12.228Z,1478843172.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:12.590Z,1478843172.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:12.658Z,1478843172.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:13.010Z,1478843173.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:13.026Z,1478843173.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:13.416Z,1478843173.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:13.437Z,1478843173.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:13.811Z,1478843173.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:13.827Z,1478843173.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:13.843Z,1478843173.843 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T05:46:13.843Z,1478843173.843 [Rowe_600LCM] Communications Fault, FailCount= 1
2016-11-11T05:46:13.843Z,1478843173.843 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T05:46:13.845Z,1478843173.845 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T05:46:14.190Z,1478843174.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:14.221Z,1478843174.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T05:46:14.222Z,1478843174.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:14.247Z,1478843174.247 [Rowe_600LCM](INFO): Powering down
2016-11-11T05:46:14.590Z,1478843174.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:14.632Z,1478843174.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T05:46:14.633Z,1478843174.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:14.990Z,1478843174.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:15.005Z,1478843175.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T05:46:15.006Z,1478843175.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:15.393Z,1478843175.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:15.408Z,1478843175.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T05:46:15.409Z,1478843175.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:15.790Z,1478843175.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:15.805Z,1478843175.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T05:46:15.806Z,1478843175.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:15.854Z,1478843175.854 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T05:46:15.854Z,1478843175.854 [Rowe_600LCM] No Fault, FailCount= 1
2016-11-11T05:46:15.863Z,1478843175.863 [Rowe_600LCM](INFO): Initializing
2016-11-11T05:46:15.864Z,1478843175.864 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T05:46:15.864Z,1478843175.864 [Rowe_600LCM](INFO): LCM OK
2016-11-11T05:46:15.864Z,1478843175.864 [Rowe_600LCM](INFO): Powering up
2016-11-11T05:46:16.212Z,1478843176.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:16.235Z,1478843176.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T05:46:16.236Z,1478843176.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:16.604Z,1478843176.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:16.637Z,1478843176.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T05:46:16.638Z,1478843176.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:17.004Z,1478843177.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:17.036Z,1478843177.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T05:46:17.037Z,1478843177.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:17.393Z,1478843177.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:17.413Z,1478843177.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T05:46:17.414Z,1478843177.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:17.801Z,1478843177.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:17.821Z,1478843177.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T05:46:17.822Z,1478843177.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:18.200Z,1478843178.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:18.214Z,1478843178.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T05:46:18.215Z,1478843178.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:18.600Z,1478843178.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:18.621Z,1478843178.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T05:46:18.622Z,1478843178.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:19.005Z,1478843179.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:19.021Z,1478843179.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T05:46:19.022Z,1478843179.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:19.411Z,1478843179.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:19.432Z,1478843179.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T05:46:19.433Z,1478843179.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:19.809Z,1478843179.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:19.829Z,1478843179.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T05:46:19.830Z,1478843179.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:20.028Z,1478843180.028 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T05:46:20.092Z,1478843180.092 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T05:46:20.093Z,1478843180.093 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T05:46:20.094Z,1478843180.094 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T05:46:20.095Z,1478843180.095 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T05:46:20.199Z,1478843180.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:20.287Z,1478843180.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2016-11-11T05:46:20.297Z,1478843180.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:20.590Z,1478843180.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:20.652Z,1478843180.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:20.994Z,1478843180.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:21.027Z,1478843181.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:21.393Z,1478843181.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:21.433Z,1478843181.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:21.790Z,1478843181.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:21.842Z,1478843181.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:22.204Z,1478843182.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:22.233Z,1478843182.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:22.604Z,1478843182.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:22.649Z,1478843182.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:23.008Z,1478843183.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:23.057Z,1478843183.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:23.393Z,1478843183.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:23.409Z,1478843183.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:23.797Z,1478843183.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:23.813Z,1478843183.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:24.201Z,1478843184.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:24.216Z,1478843184.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:24.599Z,1478843184.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:24.616Z,1478843184.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:25.004Z,1478843185.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:25.020Z,1478843185.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:25.406Z,1478843185.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:25.429Z,1478843185.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:25.810Z,1478843185.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:25.826Z,1478843185.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:26.192Z,1478843186.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:26.225Z,1478843186.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:26.613Z,1478843186.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:26.629Z,1478843186.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:27.001Z,1478843187.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:27.036Z,1478843187.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:27.392Z,1478843187.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:27.431Z,1478843187.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:27.790Z,1478843187.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:27.806Z,1478843187.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:28.208Z,1478843188.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:28.241Z,1478843188.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:28.604Z,1478843188.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:28.637Z,1478843188.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:29.004Z,1478843189.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:29.031Z,1478843189.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:29.390Z,1478843189.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:29.406Z,1478843189.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:29.790Z,1478843189.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:29.806Z,1478843189.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:30.202Z,1478843190.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:30.218Z,1478843190.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:30.608Z,1478843190.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:30.665Z,1478843190.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:31.016Z,1478843191.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:31.048Z,1478843191.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:31.408Z,1478843191.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:31.423Z,1478843191.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:31.804Z,1478843191.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:31.820Z,1478843191.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:32.197Z,1478843192.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:32.217Z,1478843192.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:32.610Z,1478843192.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:32.698Z,1478843192.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:32.998Z,1478843192.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:33.030Z,1478843193.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:33.397Z,1478843193.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:33.433Z,1478843193.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:33.794Z,1478843193.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:33.810Z,1478843193.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:34.208Z,1478843194.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:34.240Z,1478843194.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:34.627Z,1478843194.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:34.672Z,1478843194.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:35.013Z,1478843195.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:35.077Z,1478843195.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:35.392Z,1478843195.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:35.418Z,1478843195.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:35.797Z,1478843195.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:35.856Z,1478843195.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:36.202Z,1478843196.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:36.218Z,1478843196.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:36.628Z,1478843196.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:36.690Z,1478843196.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:37.017Z,1478843197.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:37.072Z,1478843197.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:37.405Z,1478843197.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:37.441Z,1478843197.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:37.804Z,1478843197.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:37.837Z,1478843197.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:38.193Z,1478843198.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:38.208Z,1478843198.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:38.608Z,1478843198.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:38.691Z,1478843198.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:38.994Z,1478843198.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:39.010Z,1478843199.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:39.396Z,1478843199.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:39.412Z,1478843199.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:39.797Z,1478843199.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:39.812Z,1478843199.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:40.204Z,1478843200.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:40.220Z,1478843200.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:40.604Z,1478843200.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:40.619Z,1478843200.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:41.012Z,1478843201.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:41.028Z,1478843201.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:41.390Z,1478843201.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:41.425Z,1478843201.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:41.790Z,1478843201.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:41.818Z,1478843201.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:42.192Z,1478843202.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:42.225Z,1478843202.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:42.590Z,1478843202.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:42.618Z,1478843202.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:43.016Z,1478843203.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:43.036Z,1478843203.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:43.412Z,1478843203.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:43.433Z,1478843203.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:43.448Z,1478843203.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:43.808Z,1478843203.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:43.830Z,1478843203.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:44.198Z,1478843204.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:44.224Z,1478843204.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:44.244Z,1478843204.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:44.590Z,1478843204.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:44.626Z,1478843204.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:45.002Z,1478843205.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:45.033Z,1478843205.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:45.396Z,1478843205.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:45.428Z,1478843205.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:45.793Z,1478843205.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:45.833Z,1478843205.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:46.204Z,1478843206.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:46.240Z,1478843206.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:46.639Z,1478843206.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:46.687Z,1478843206.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:47.004Z,1478843207.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:47.040Z,1478843207.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:47.398Z,1478843207.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:47.414Z,1478843207.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:47.797Z,1478843207.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:47.817Z,1478843207.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:48.199Z,1478843208.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:48.215Z,1478843208.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:48.620Z,1478843208.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:48.658Z,1478843208.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:49.006Z,1478843209.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:49.022Z,1478843209.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:49.408Z,1478843209.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:49.482Z,1478843209.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:49.811Z,1478843209.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:49.827Z,1478843209.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:50.190Z,1478843210.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:50.248Z,1478843210.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:50.617Z,1478843210.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:50.668Z,1478843210.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:50.990Z,1478843210.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:51.045Z,1478843211.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:51.393Z,1478843211.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:51.425Z,1478843211.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:51.790Z,1478843211.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:51.834Z,1478843211.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:52.204Z,1478843212.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:52.237Z,1478843212.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:52.647Z,1478843212.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:52.684Z,1478843212.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:53.004Z,1478843213.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:53.042Z,1478843213.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:53.393Z,1478843213.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:53.413Z,1478843213.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:53.793Z,1478843213.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:53.813Z,1478843213.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:54.196Z,1478843214.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:54.211Z,1478843214.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:54.595Z,1478843214.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:54.670Z,1478843214.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:55.008Z,1478843215.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:55.024Z,1478843215.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:55.403Z,1478843215.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:55.425Z,1478843215.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:55.808Z,1478843215.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:55.824Z,1478843215.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:56.202Z,1478843216.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:56.222Z,1478843216.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:56.598Z,1478843216.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:56.613Z,1478843216.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:57.002Z,1478843217.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:57.038Z,1478843217.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:57.405Z,1478843217.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:57.426Z,1478843217.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:57.790Z,1478843217.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:57.825Z,1478843217.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:58.211Z,1478843218.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:58.227Z,1478843218.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:58.611Z,1478843218.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:58.627Z,1478843218.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:59.023Z,1478843219.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:59.038Z,1478843219.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:59.391Z,1478843219.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:59.417Z,1478843219.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:46:59.804Z,1478843219.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:46:59.824Z,1478843219.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:00.192Z,1478843220.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:00.229Z,1478843220.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:00.596Z,1478843220.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:00.634Z,1478843220.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:01.008Z,1478843221.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:01.049Z,1478843221.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:01.404Z,1478843221.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:01.436Z,1478843221.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:01.804Z,1478843221.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:01.820Z,1478843221.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:02.194Z,1478843222.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:02.214Z,1478843222.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:02.612Z,1478843222.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:02.655Z,1478843222.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:03.001Z,1478843223.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:03.020Z,1478843223.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:03.396Z,1478843223.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:03.459Z,1478843223.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:03.790Z,1478843223.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:03.834Z,1478843223.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:04.208Z,1478843224.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:04.240Z,1478843224.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:04.624Z,1478843224.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:04.689Z,1478843224.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:05.028Z,1478843225.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:05.045Z,1478843225.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:08.362Z,1478843228.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:08.416Z,1478843228.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:08.517Z,1478843228.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:08.549Z,1478843228.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:08.880Z,1478843228.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:08.925Z,1478843228.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:09.280Z,1478843229.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:09.296Z,1478843229.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:09.677Z,1478843229.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:09.697Z,1478843229.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:10.070Z,1478843230.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:10.086Z,1478843230.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:10.465Z,1478843230.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:10.488Z,1478843230.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:10.873Z,1478843230.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:10.941Z,1478843230.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:11.276Z,1478843231.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:11.306Z,1478843231.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:11.662Z,1478843231.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:11.703Z,1478843231.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:12.083Z,1478843232.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:12.099Z,1478843232.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:12.484Z,1478843232.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:12.505Z,1478843232.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:12.895Z,1478843232.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:12.936Z,1478843232.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:13.268Z,1478843233.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:13.338Z,1478843233.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:13.662Z,1478843233.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:13.697Z,1478843233.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:14.085Z,1478843234.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:14.105Z,1478843234.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:14.468Z,1478843234.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:14.484Z,1478843234.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:14.876Z,1478843234.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:14.897Z,1478843234.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:15.280Z,1478843235.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:15.296Z,1478843235.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:15.677Z,1478843235.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:15.697Z,1478843235.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:16.070Z,1478843236.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:16.093Z,1478843236.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:16.464Z,1478843236.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:16.496Z,1478843236.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:16.873Z,1478843236.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:16.896Z,1478843236.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:17.276Z,1478843237.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:17.298Z,1478843237.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:17.662Z,1478843237.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:17.690Z,1478843237.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:18.087Z,1478843238.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:18.103Z,1478843238.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:18.476Z,1478843238.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:18.497Z,1478843238.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:18.914Z,1478843238.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:18.949Z,1478843238.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:19.270Z,1478843239.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:19.306Z,1478843239.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:19.662Z,1478843239.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:19.678Z,1478843239.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:20.065Z,1478843240.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:20.080Z,1478843240.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:20.462Z,1478843240.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:20.478Z,1478843240.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:20.884Z,1478843240.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:20.929Z,1478843240.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:21.278Z,1478843241.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:21.329Z,1478843241.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:21.686Z,1478843241.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:21.701Z,1478843241.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:22.062Z,1478843242.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:22.100Z,1478843242.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:22.462Z,1478843242.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:22.488Z,1478843242.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:22.878Z,1478843242.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:22.897Z,1478843242.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:23.277Z,1478843243.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:23.306Z,1478843243.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:23.659Z,1478843243.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:23.694Z,1478843243.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:24.083Z,1478843244.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:24.093Z,1478843244.093 [BPC1](ERROR): Failed to receive battery data
2016-11-11T05:47:24.093Z,1478843244.093 [BPC1] Communications Fault, FailCount= 1
2016-11-11T05:47:24.093Z,1478843244.093 [BPC1](ERROR): Communications Fault
2016-11-11T05:47:24.101Z,1478843244.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:24.126Z,1478843244.126 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T05:47:24.484Z,1478843244.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:24.499Z,1478843244.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:24.895Z,1478843244.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:24.980Z,1478843244.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:25.266Z,1478843245.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:25.292Z,1478843245.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:25.308Z,1478843245.308 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:47:25.308Z,1478843245.309 [BPC1] No Fault, FailCount= 1
2016-11-11T05:47:25.662Z,1478843245.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:25.745Z,1478843245.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:26.065Z,1478843246.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:26.140Z,1478843246.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:26.462Z,1478843246.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:26.497Z,1478843246.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:26.907Z,1478843246.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:26.961Z,1478843246.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:27.276Z,1478843247.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:27.309Z,1478843247.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:27.676Z,1478843247.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:27.709Z,1478843247.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:28.066Z,1478843248.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:28.105Z,1478843248.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:28.462Z,1478843248.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:28.477Z,1478843248.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:28.873Z,1478843248.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:28.893Z,1478843248.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:29.272Z,1478843249.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:29.323Z,1478843249.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:29.668Z,1478843249.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:29.689Z,1478843249.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:30.076Z,1478843250.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:30.092Z,1478843250.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:30.478Z,1478843250.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:30.568Z,1478843250.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:30.878Z,1478843250.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:30.894Z,1478843250.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:31.262Z,1478843251.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:31.294Z,1478843251.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:31.662Z,1478843251.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:31.698Z,1478843251.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:32.065Z,1478843252.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:32.100Z,1478843252.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:32.462Z,1478843252.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:32.538Z,1478843252.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:32.880Z,1478843252.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:32.912Z,1478843252.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:33.276Z,1478843253.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:33.292Z,1478843253.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:33.680Z,1478843253.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:33.701Z,1478843253.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:34.070Z,1478843254.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:34.085Z,1478843254.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:34.467Z,1478843254.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:34.527Z,1478843254.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:34.861Z,1478843254.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:34.893Z,1478843254.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:35.265Z,1478843255.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:35.300Z,1478843255.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:35.662Z,1478843255.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:35.686Z,1478843255.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:36.091Z,1478843256.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:36.107Z,1478843256.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:36.476Z,1478843256.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:36.517Z,1478843256.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:36.884Z,1478843256.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:36.913Z,1478843256.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:37.266Z,1478843257.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:37.282Z,1478843257.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:37.669Z,1478843257.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:37.684Z,1478843257.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:37.828Z,1478843257.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:38.078Z,1478843258.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:38.106Z,1478843258.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:38.472Z,1478843258.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:38.492Z,1478843258.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:38.624Z,1478843258.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:38.923Z,1478843258.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:38.964Z,1478843258.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:39.278Z,1478843259.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:39.303Z,1478843259.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:39.686Z,1478843259.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:39.702Z,1478843259.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:40.066Z,1478843260.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:40.136Z,1478843260.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:40.462Z,1478843260.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:40.498Z,1478843260.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:40.902Z,1478843260.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:40.952Z,1478843260.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:41.268Z,1478843261.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:41.314Z,1478843261.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:41.665Z,1478843261.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:41.685Z,1478843261.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:42.076Z,1478843262.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:42.118Z,1478843262.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:42.501Z,1478843262.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:42.576Z,1478843262.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:42.876Z,1478843262.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:42.892Z,1478843262.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:43.272Z,1478843263.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:43.288Z,1478843263.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:43.670Z,1478843263.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:43.685Z,1478843263.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:44.068Z,1478843264.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:44.101Z,1478843264.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:44.501Z,1478843264.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:44.548Z,1478843264.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:44.880Z,1478843264.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:44.909Z,1478843264.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:45.283Z,1478843265.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:45.299Z,1478843265.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:45.682Z,1478843265.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:45.698Z,1478843265.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:46.062Z,1478843266.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:46.097Z,1478843266.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:46.462Z,1478843266.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:46.553Z,1478843266.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:46.862Z,1478843266.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:46.893Z,1478843266.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:47.269Z,1478843267.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:47.301Z,1478843267.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:47.662Z,1478843267.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:47.677Z,1478843267.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:48.076Z,1478843268.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:48.111Z,1478843268.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:48.507Z,1478843268.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:48.562Z,1478843268.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:48.876Z,1478843268.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:48.892Z,1478843268.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:49.269Z,1478843269.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:49.289Z,1478843269.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:49.669Z,1478843269.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:49.685Z,1478843269.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:50.075Z,1478843270.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:50.090Z,1478843270.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:50.476Z,1478843270.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:50.492Z,1478843270.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:50.890Z,1478843270.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:50.909Z,1478843270.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:51.287Z,1478843271.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:51.303Z,1478843271.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:51.683Z,1478843271.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:51.698Z,1478843271.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:52.066Z,1478843272.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:52.093Z,1478843272.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:52.466Z,1478843272.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:52.501Z,1478843272.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:52.894Z,1478843272.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:52.936Z,1478843272.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:53.269Z,1478843273.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:53.305Z,1478843273.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:53.662Z,1478843273.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:53.712Z,1478843273.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:54.076Z,1478843274.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:54.102Z,1478843274.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:54.476Z,1478843274.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:54.522Z,1478843274.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:54.887Z,1478843274.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:54.920Z,1478843274.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:55.262Z,1478843275.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:55.321Z,1478843275.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:55.665Z,1478843275.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:55.680Z,1478843275.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:56.068Z,1478843276.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:56.125Z,1478843276.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:56.476Z,1478843276.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:56.565Z,1478843276.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:56.876Z,1478843276.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:56.919Z,1478843276.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:57.280Z,1478843277.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:57.312Z,1478843277.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:57.676Z,1478843277.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:57.691Z,1478843277.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:58.070Z,1478843278.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:58.085Z,1478843278.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:58.483Z,1478843278.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:58.538Z,1478843278.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:58.862Z,1478843278.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:58.897Z,1478843278.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:59.276Z,1478843279.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:59.309Z,1478843279.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:47:59.659Z,1478843279.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:47:59.674Z,1478843279.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:00.076Z,1478843280.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:00.107Z,1478843280.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:00.511Z,1478843280.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:00.545Z,1478843280.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:00.876Z,1478843280.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:00.909Z,1478843280.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:01.262Z,1478843281.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:01.277Z,1478843281.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:01.662Z,1478843281.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:01.678Z,1478843281.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:02.065Z,1478843282.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:02.081Z,1478843282.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:02.514Z,1478843282.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:02.550Z,1478843282.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:02.888Z,1478843282.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:02.909Z,1478843282.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:03.276Z,1478843283.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:03.310Z,1478843283.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:03.676Z,1478843283.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:03.709Z,1478843283.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:03.715Z,1478843283.715 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T05:43:03.5Z
2016-11-11T05:48:03.715Z,1478843283.715 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T05:48:03.715Z,1478843283.715 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T05:48:04.066Z,1478843284.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:04.090Z,1478843284.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:05.063Z,1478843285.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:05.079Z,1478843285.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:05.178Z,1478843285.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:05.206Z,1478843285.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:09.362Z,1478843289.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:09.450Z,1478843289.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:09.519Z,1478843289.519 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0024.lzma
2016-11-11T05:48:09.558Z,1478843289.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:09.603Z,1478843289.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:09.944Z,1478843289.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:09.978Z,1478843289.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:10.313Z,1478843290.313 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0024.lzma.bak
2016-11-11T05:48:10.313Z,1478843290.313 [DataOverHttps](INFO): SBD MOMSN=4555063
2016-11-11T05:48:10.340Z,1478843290.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:10.402Z,1478843290.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:13.378Z,1478843293.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:13.406Z,1478843293.406 [BPC1](ERROR): Failed to receive battery data
2016-11-11T05:48:13.406Z,1478843293.406 [BPC1] Communications Fault, FailCount= 1
2016-11-11T05:48:13.406Z,1478843293.406 [BPC1](ERROR): Communications Fault
2016-11-11T05:48:13.456Z,1478843293.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:13.519Z,1478843293.519 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T05:48:13.582Z,1478843293.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:13.626Z,1478843293.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:16.079Z,1478843296.079 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T05:48:16.079Z,1478843296.079 [Rowe_600LCM] Communications Fault, FailCount= 2
2016-11-11T05:48:16.079Z,1478843296.079 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T05:48:16.483Z,1478843296.483 [Rowe_600LCM](INFO): Powering down
2016-11-11T05:48:22.075Z,1478843302.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:22.139Z,1478843302.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2016-11-11T05:48:22.145Z,1478843302.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:22.197Z,1478843302.197 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T05:48:22.197Z,1478843302.197 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T05:48:22.198Z,1478843302.197 [Rowe_600LCM] No Fault, FailCount= 2
2016-11-11T05:48:22.299Z,1478843302.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:22.354Z,1478843302.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2016-11-11T05:48:22.368Z,1478843302.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:22.417Z,1478843302.417 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:48:22.417Z,1478843302.417 [BPC1] No Fault, FailCount= 1
2016-11-11T05:48:22.543Z,1478843302.543 [Rowe_600LCM](INFO): Initializing
2016-11-11T05:48:22.544Z,1478843302.544 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T05:48:22.544Z,1478843302.544 [Rowe_600LCM](INFO): LCM OK
2016-11-11T05:48:22.544Z,1478843302.544 [Rowe_600LCM](INFO): Powering up
2016-11-11T05:48:22.651Z,1478843302.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:22.734Z,1478843302.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2016-11-11T05:48:22.736Z,1478843302.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:23.030Z,1478843303.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:23.092Z,1478843303.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2016-11-11T05:48:23.093Z,1478843303.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:23.442Z,1478843303.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:23.457Z,1478843303.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2016-11-11T05:48:23.458Z,1478843303.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:23.853Z,1478843303.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:23.876Z,1478843303.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2016-11-11T05:48:23.877Z,1478843303.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:26.792Z,1478843306.792 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T05:48:26.914Z,1478843306.914 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T05:48:26.915Z,1478843306.915 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T05:48:26.916Z,1478843306.916 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T05:48:26.917Z,1478843306.917 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T05:48:31.216Z,1478843311.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:31.282Z,1478843311.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:31.369Z,1478843311.369 [DataOverHttps](INFO): Sending 171 bytes from file Logs/20161111T044527/Express0025.lzma
2016-11-11T05:48:31.475Z,1478843311.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:31.527Z,1478843311.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:31.814Z,1478843311.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:31.844Z,1478843311.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:32.169Z,1478843312.169 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0025.lzma.bak
2016-11-11T05:48:32.169Z,1478843312.170 [DataOverHttps](INFO): SBD MOMSN=4555065
2016-11-11T05:48:32.225Z,1478843312.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:32.249Z,1478843312.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:34.041Z,1478843314.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:34.122Z,1478843314.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:34.136Z,1478843314.136 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T05:48:34.136Z,1478843314.136 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T05:48:34.136Z,1478843314.136 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T05:48:34.230Z,1478843314.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:34.259Z,1478843314.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:37.617Z,1478843317.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:37.674Z,1478843317.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:37.772Z,1478843317.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:37.796Z,1478843317.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:38.167Z,1478843318.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:38.220Z,1478843318.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:38.567Z,1478843318.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:38.619Z,1478843318.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:38.968Z,1478843318.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:38.984Z,1478843318.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:39.356Z,1478843319.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:39.416Z,1478843319.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:39.746Z,1478843319.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:39.785Z,1478843319.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:40.149Z,1478843320.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:40.184Z,1478843320.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:40.547Z,1478843320.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:40.588Z,1478843320.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:40.969Z,1478843320.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:40.985Z,1478843320.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:41.364Z,1478843321.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:41.386Z,1478843321.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:41.775Z,1478843321.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:41.791Z,1478843321.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:42.146Z,1478843322.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:42.186Z,1478843322.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:42.546Z,1478843322.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:42.562Z,1478843322.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:42.949Z,1478843322.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:42.985Z,1478843322.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:43.352Z,1478843323.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:43.368Z,1478843323.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:43.794Z,1478843323.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:43.822Z,1478843323.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:44.160Z,1478843324.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:44.186Z,1478843324.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:44.236Z,1478843324.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:44.560Z,1478843324.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:44.594Z,1478843324.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:44.947Z,1478843324.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:45.010Z,1478843325.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:45.032Z,1478843325.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:45.353Z,1478843325.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:45.387Z,1478843325.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:45.799Z,1478843325.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:45.854Z,1478843325.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:46.155Z,1478843326.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:46.178Z,1478843326.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:46.546Z,1478843326.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:46.578Z,1478843326.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:46.969Z,1478843326.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:46.985Z,1478843326.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:47.411Z,1478843327.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:47.451Z,1478843327.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:47.768Z,1478843327.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:47.784Z,1478843327.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:48.154Z,1478843328.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:48.180Z,1478843328.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:48.546Z,1478843328.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:48.574Z,1478843328.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:48.953Z,1478843328.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:49.013Z,1478843329.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:49.346Z,1478843329.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:49.430Z,1478843329.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:49.760Z,1478843329.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:49.788Z,1478843329.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:50.164Z,1478843330.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:50.217Z,1478843330.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:50.564Z,1478843330.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:50.579Z,1478843330.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:50.953Z,1478843330.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:51.003Z,1478843331.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:51.358Z,1478843331.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:51.441Z,1478843331.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:51.753Z,1478843331.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:51.768Z,1478843331.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:52.150Z,1478843332.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:52.170Z,1478843332.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:52.548Z,1478843332.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:52.576Z,1478843332.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:52.964Z,1478843332.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:52.996Z,1478843332.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:53.378Z,1478843333.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:53.435Z,1478843333.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:53.760Z,1478843333.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:53.795Z,1478843333.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:54.146Z,1478843334.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:54.189Z,1478843334.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:54.546Z,1478843334.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:54.562Z,1478843334.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:54.949Z,1478843334.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:54.985Z,1478843334.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:55.349Z,1478843335.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:55.369Z,1478843335.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:55.757Z,1478843335.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:55.777Z,1478843335.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:56.164Z,1478843336.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:56.180Z,1478843336.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:56.562Z,1478843336.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:56.577Z,1478843336.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:56.959Z,1478843336.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:57.082Z,1478843337.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:57.357Z,1478843337.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:57.373Z,1478843337.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:57.771Z,1478843337.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:57.795Z,1478843337.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:58.149Z,1478843338.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:58.177Z,1478843338.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:58.546Z,1478843338.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:58.581Z,1478843338.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:58.968Z,1478843338.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:58.989Z,1478843338.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:59.386Z,1478843339.386 [NAL9602](INFO): GPS fix at 20161111T054703: (36.802714, -121.788064)
2016-11-11T05:48:59.420Z,1478843339.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:59.778Z,1478843339.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:48:59.811Z,1478843339.811 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:59.811Z,1478843339.811 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2016-11-11T05:48:59.823Z,1478843339.823 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:48:59.839Z,1478843339.839 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:48:59.839Z,1478843339.839 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2016-11-11T05:48:59.847Z,1478843339.847 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:48:59.883Z,1478843339.883 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:48:59.883Z,1478843339.883 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:49:00.166Z,1478843340.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:00.206Z,1478843340.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:49:00.206Z,1478843340.207 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2016-11-11T05:49:00.207Z,1478843340.207 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:49:00.207Z,1478843340.207 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2016-11-11T05:49:00.552Z,1478843340.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:00.566Z,1478843340.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:49:00.567Z,1478843340.566 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:49:00.567Z,1478843340.567 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:49:00.572Z,1478843340.572 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:49:00.573Z,1478843340.573 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:49:00.573Z,1478843340.573 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:49:00.957Z,1478843340.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:00.972Z,1478843340.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:01.389Z,1478843341.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:01.468Z,1478843341.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:01.759Z,1478843341.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:01.841Z,1478843341.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:02.165Z,1478843342.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:02.189Z,1478843342.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:02.565Z,1478843342.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:02.617Z,1478843342.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:02.945Z,1478843342.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:02.980Z,1478843342.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:03.394Z,1478843343.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:03.477Z,1478843343.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:03.745Z,1478843343.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:03.797Z,1478843343.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:03.804Z,1478843343.804 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:03.804Z,1478843343.804 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2016-11-11T05:49:03.804Z,1478843343.804 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:49:03.862Z,1478843343.862 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:49:04.152Z,1478843344.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:04.217Z,1478843344.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:04.285Z,1478843344.285 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:49:04.285Z,1478843344.285 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2016-11-11T05:49:04.552Z,1478843344.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:04.581Z,1478843344.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:04.587Z,1478843344.587 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:49:04.588Z,1478843344.588 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:49:04.589Z,1478843344.589 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:49:04.945Z,1478843344.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:04.985Z,1478843344.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:05.384Z,1478843345.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:05.406Z,1478843345.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:05.750Z,1478843345.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:05.765Z,1478843345.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:06.157Z,1478843346.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:06.172Z,1478843346.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:06.528Z,1478843346.528 [NAL9602](INFO): Powering down
2016-11-11T05:49:06.561Z,1478843346.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:06.585Z,1478843346.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:06.953Z,1478843346.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:06.968Z,1478843346.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:07.381Z,1478843347.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:07.425Z,1478843347.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:07.752Z,1478843347.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:07.767Z,1478843347.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:08.152Z,1478843348.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:08.173Z,1478843348.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:08.553Z,1478843348.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:08.573Z,1478843348.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:08.945Z,1478843348.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:08.980Z,1478843348.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:09.345Z,1478843349.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:09.400Z,1478843349.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:09.745Z,1478843349.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:09.759Z,1478843349.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:10.150Z,1478843350.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:10.166Z,1478843350.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:10.549Z,1478843350.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:10.569Z,1478843350.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:10.948Z,1478843350.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:10.969Z,1478843350.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:11.350Z,1478843351.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:11.365Z,1478843351.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:11.768Z,1478843351.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:11.801Z,1478843351.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:12.152Z,1478843352.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:12.173Z,1478843352.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:12.552Z,1478843352.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:12.567Z,1478843352.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:12.953Z,1478843352.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:13.006Z,1478843353.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:13.365Z,1478843353.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:13.385Z,1478843353.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:13.751Z,1478843353.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:13.791Z,1478843353.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:14.145Z,1478843354.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:14.189Z,1478843354.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:14.545Z,1478843354.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:14.588Z,1478843354.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:14.945Z,1478843354.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:15.013Z,1478843355.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:15.353Z,1478843355.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:15.386Z,1478843355.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:15.753Z,1478843355.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:15.810Z,1478843355.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:16.145Z,1478843356.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:16.170Z,1478843356.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:16.545Z,1478843356.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:16.594Z,1478843356.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:16.945Z,1478843356.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:16.994Z,1478843356.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:17.351Z,1478843357.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:17.408Z,1478843357.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:17.745Z,1478843357.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:17.769Z,1478843357.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:18.157Z,1478843358.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:18.201Z,1478843358.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:18.552Z,1478843358.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:18.567Z,1478843358.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:18.952Z,1478843358.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:18.973Z,1478843358.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:19.373Z,1478843359.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:19.416Z,1478843359.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:19.752Z,1478843359.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:19.768Z,1478843359.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:20.145Z,1478843360.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:20.181Z,1478843360.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:20.545Z,1478843360.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:20.578Z,1478843360.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:20.945Z,1478843360.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:20.980Z,1478843360.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:21.361Z,1478843361.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:21.397Z,1478843361.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:21.749Z,1478843361.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:21.781Z,1478843361.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:22.145Z,1478843362.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:22.177Z,1478843362.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:22.545Z,1478843362.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:22.577Z,1478843362.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:22.945Z,1478843362.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:22.977Z,1478843362.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:23.345Z,1478843363.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:23.419Z,1478843363.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:23.749Z,1478843363.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:23.763Z,1478843363.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:24.149Z,1478843364.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:24.169Z,1478843364.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:24.549Z,1478843364.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:24.569Z,1478843364.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:24.949Z,1478843364.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:24.964Z,1478843364.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:25.349Z,1478843365.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:25.369Z,1478843365.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:25.781Z,1478843365.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:25.829Z,1478843365.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:26.149Z,1478843366.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:26.169Z,1478843366.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:26.545Z,1478843366.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:26.565Z,1478843366.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:26.945Z,1478843366.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:26.965Z,1478843366.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:27.349Z,1478843367.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:27.389Z,1478843367.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:27.745Z,1478843367.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:27.765Z,1478843367.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:28.149Z,1478843368.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:28.189Z,1478843368.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:28.545Z,1478843368.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:28.560Z,1478843368.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:28.950Z,1478843368.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:28.997Z,1478843368.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:29.373Z,1478843369.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:29.388Z,1478843369.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:29.745Z,1478843369.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:29.793Z,1478843369.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:30.145Z,1478843370.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:30.233Z,1478843370.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:30.549Z,1478843370.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:30.564Z,1478843370.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:30.949Z,1478843370.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:30.964Z,1478843370.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:31.350Z,1478843371.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:31.366Z,1478843371.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:31.749Z,1478843371.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:31.764Z,1478843371.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:32.145Z,1478843372.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:32.165Z,1478843372.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:32.549Z,1478843372.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:32.569Z,1478843372.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:32.945Z,1478843372.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:32.961Z,1478843372.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:33.352Z,1478843373.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:33.368Z,1478843373.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:33.746Z,1478843373.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:33.794Z,1478843373.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:34.149Z,1478843374.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:34.164Z,1478843374.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:34.549Z,1478843374.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:34.564Z,1478843374.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:38.012Z,1478843378.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:38.027Z,1478843378.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:38.133Z,1478843378.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:38.172Z,1478843378.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:38.481Z,1478843378.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:38.496Z,1478843378.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:38.886Z,1478843378.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:38.901Z,1478843378.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:39.277Z,1478843379.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:39.297Z,1478843379.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:39.686Z,1478843379.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:39.706Z,1478843379.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:40.089Z,1478843380.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:40.104Z,1478843380.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:40.481Z,1478843380.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:40.521Z,1478843380.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:40.881Z,1478843380.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:40.974Z,1478843380.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:41.277Z,1478843381.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:41.297Z,1478843381.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:41.707Z,1478843381.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:41.761Z,1478843381.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:42.077Z,1478843382.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:42.101Z,1478843382.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:42.481Z,1478843382.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:42.496Z,1478843382.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:42.878Z,1478843382.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:42.921Z,1478843382.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:43.304Z,1478843383.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:43.355Z,1478843383.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:43.677Z,1478843383.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:43.721Z,1478843383.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:44.077Z,1478843384.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:44.125Z,1478843384.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:44.477Z,1478843384.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:44.505Z,1478843384.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:44.877Z,1478843384.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:44.901Z,1478843384.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:45.315Z,1478843385.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:45.364Z,1478843385.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:45.677Z,1478843385.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:45.697Z,1478843385.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:46.077Z,1478843386.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:46.105Z,1478843386.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:46.477Z,1478843386.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:46.501Z,1478843386.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:46.877Z,1478843386.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:46.897Z,1478843386.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:47.320Z,1478843387.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:47.349Z,1478843387.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:47.685Z,1478843387.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:47.705Z,1478843387.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:48.089Z,1478843388.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:48.104Z,1478843388.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:48.483Z,1478843388.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:48.505Z,1478843388.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:48.884Z,1478843388.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:48.900Z,1478843388.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:49.292Z,1478843389.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:49.373Z,1478843389.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:49.677Z,1478843389.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:49.710Z,1478843389.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:50.077Z,1478843390.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:50.104Z,1478843390.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:50.477Z,1478843390.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:50.513Z,1478843390.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:50.885Z,1478843390.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:50.910Z,1478843390.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:51.277Z,1478843391.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:51.331Z,1478843391.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:51.683Z,1478843391.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:51.699Z,1478843391.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:52.084Z,1478843392.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:52.105Z,1478843392.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:52.485Z,1478843392.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:52.500Z,1478843392.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:52.877Z,1478843392.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:52.911Z,1478843392.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:53.288Z,1478843393.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:53.316Z,1478843393.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:53.681Z,1478843393.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:53.721Z,1478843393.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:54.081Z,1478843394.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:54.113Z,1478843394.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:54.481Z,1478843394.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:54.513Z,1478843394.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:54.877Z,1478843394.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:54.909Z,1478843394.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:55.277Z,1478843395.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:55.335Z,1478843395.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:55.685Z,1478843395.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:55.724Z,1478843395.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:56.077Z,1478843396.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:56.117Z,1478843396.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:56.477Z,1478843396.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:56.533Z,1478843396.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:56.885Z,1478843396.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:56.921Z,1478843396.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:57.303Z,1478843397.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:57.377Z,1478843397.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:57.680Z,1478843397.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:57.701Z,1478843397.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:58.085Z,1478843398.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:58.141Z,1478843398.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:58.480Z,1478843398.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:58.496Z,1478843398.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:58.884Z,1478843398.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:58.905Z,1478843398.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:59.303Z,1478843399.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:59.349Z,1478843399.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:49:59.684Z,1478843399.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:49:59.699Z,1478843399.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:00.091Z,1478843400.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:00.106Z,1478843400.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:00.484Z,1478843400.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:00.507Z,1478843400.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:00.877Z,1478843400.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:00.909Z,1478843400.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:01.302Z,1478843401.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:01.329Z,1478843401.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:01.677Z,1478843401.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:01.717Z,1478843401.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:02.077Z,1478843402.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:02.097Z,1478843402.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:02.480Z,1478843402.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:02.501Z,1478843402.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:02.885Z,1478843402.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:02.900Z,1478843402.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:03.299Z,1478843403.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:03.335Z,1478843403.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:03.683Z,1478843403.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:03.698Z,1478843403.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:04.083Z,1478843404.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:04.098Z,1478843404.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:04.484Z,1478843404.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:04.499Z,1478843404.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:04.880Z,1478843404.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:04.910Z,1478843404.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:05.329Z,1478843405.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:05.370Z,1478843405.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:05.678Z,1478843405.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:05.717Z,1478843405.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:06.081Z,1478843406.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:06.101Z,1478843406.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:06.485Z,1478843406.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:06.500Z,1478843406.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:06.885Z,1478843406.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:06.901Z,1478843406.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:07.284Z,1478843407.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:07.305Z,1478843407.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:07.687Z,1478843407.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:07.719Z,1478843407.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:08.088Z,1478843408.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:08.110Z,1478843408.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:08.477Z,1478843408.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:08.513Z,1478843408.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:08.877Z,1478843408.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:08.914Z,1478843408.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:09.277Z,1478843409.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:09.337Z,1478843409.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:09.677Z,1478843409.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:09.719Z,1478843409.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:10.089Z,1478843410.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:10.124Z,1478843410.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:10.482Z,1478843410.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:10.513Z,1478843410.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:10.886Z,1478843410.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:10.941Z,1478843410.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:11.290Z,1478843411.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:11.322Z,1478843411.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:11.677Z,1478843411.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:11.725Z,1478843411.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:12.081Z,1478843412.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:12.126Z,1478843412.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:12.477Z,1478843412.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:12.501Z,1478843412.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:12.877Z,1478843412.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:12.893Z,1478843412.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:13.287Z,1478843413.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:13.336Z,1478843413.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:13.680Z,1478843413.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:13.701Z,1478843413.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:14.084Z,1478843414.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:14.100Z,1478843414.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:14.483Z,1478843414.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:14.505Z,1478843414.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:14.884Z,1478843414.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:14.899Z,1478843414.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:15.288Z,1478843415.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:15.312Z,1478843415.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:15.684Z,1478843415.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:15.703Z,1478843415.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:16.077Z,1478843416.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:16.112Z,1478843416.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:16.477Z,1478843416.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:16.512Z,1478843416.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:16.877Z,1478843416.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:16.913Z,1478843416.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:17.288Z,1478843417.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:17.303Z,1478843417.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:17.677Z,1478843417.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:17.693Z,1478843417.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:18.077Z,1478843418.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:18.113Z,1478843418.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:18.477Z,1478843418.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:18.513Z,1478843418.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:18.881Z,1478843418.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:18.906Z,1478843418.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:19.327Z,1478843419.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:19.358Z,1478843419.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:19.677Z,1478843419.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:19.692Z,1478843419.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:20.082Z,1478843420.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:20.098Z,1478843420.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:20.484Z,1478843420.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:20.499Z,1478843420.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:20.883Z,1478843420.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:20.905Z,1478843420.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:21.284Z,1478843421.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:21.300Z,1478843421.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:21.680Z,1478843421.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:21.713Z,1478843421.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:22.084Z,1478843422.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:22.100Z,1478843422.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:22.477Z,1478843422.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:22.509Z,1478843422.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:22.877Z,1478843422.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:22.935Z,1478843422.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:23.215Z,1478843423.215 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T05:50:23.215Z,1478843423.215 [Rowe_600LCM] Communications Fault, FailCount= 3
2016-11-11T05:50:23.215Z,1478843423.215 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T05:50:23.278Z,1478843423.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:23.312Z,1478843423.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T05:50:23.313Z,1478843423.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:23.333Z,1478843423.332 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T05:50:23.620Z,1478843423.620 [Rowe_600LCM](INFO): Powering down
2016-11-11T05:50:23.681Z,1478843423.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:23.712Z,1478843423.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T05:50:23.713Z,1478843423.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:24.077Z,1478843424.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:24.132Z,1478843424.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T05:50:24.133Z,1478843424.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:24.483Z,1478843424.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:24.498Z,1478843424.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T05:50:24.499Z,1478843424.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:24.885Z,1478843424.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:24.905Z,1478843424.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T05:50:24.906Z,1478843424.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:24.955Z,1478843424.955 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T05:50:24.956Z,1478843424.955 [Rowe_600LCM] No Fault, FailCount= 3
2016-11-11T05:50:25.235Z,1478843425.235 [Rowe_600LCM](INFO): Initializing
2016-11-11T05:50:25.236Z,1478843425.236 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T05:50:25.236Z,1478843425.236 [Rowe_600LCM](INFO): LCM OK
2016-11-11T05:50:25.236Z,1478843425.236 [Rowe_600LCM](INFO): Powering up
2016-11-11T05:50:25.293Z,1478843425.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:25.333Z,1478843425.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T05:50:25.334Z,1478843425.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:25.684Z,1478843425.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:25.698Z,1478843425.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T05:50:25.700Z,1478843425.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:26.084Z,1478843426.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:26.139Z,1478843426.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T05:50:26.140Z,1478843426.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:26.485Z,1478843426.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:26.505Z,1478843426.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T05:50:26.506Z,1478843426.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:26.885Z,1478843426.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:26.942Z,1478843426.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T05:50:26.943Z,1478843426.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:27.285Z,1478843427.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:27.300Z,1478843427.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T05:50:27.301Z,1478843427.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:27.677Z,1478843427.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:27.711Z,1478843427.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T05:50:27.712Z,1478843427.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:28.077Z,1478843428.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:28.111Z,1478843428.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T05:50:28.112Z,1478843428.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:28.477Z,1478843428.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:28.509Z,1478843428.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T05:50:28.510Z,1478843428.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:28.877Z,1478843428.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:28.912Z,1478843428.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T05:50:28.914Z,1478843428.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:29.277Z,1478843429.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:29.323Z,1478843429.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T05:50:29.333Z,1478843429.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:29.475Z,1478843429.475 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T05:50:29.547Z,1478843429.547 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T05:50:29.548Z,1478843429.548 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T05:50:29.549Z,1478843429.549 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T05:50:29.551Z,1478843429.551 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T05:50:29.684Z,1478843429.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:29.705Z,1478843429.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T05:50:29.706Z,1478843429.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:30.079Z,1478843430.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:30.130Z,1478843430.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:30.483Z,1478843430.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:30.530Z,1478843430.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:30.885Z,1478843430.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:30.924Z,1478843430.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:31.277Z,1478843431.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:31.313Z,1478843431.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:31.677Z,1478843431.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:31.704Z,1478843431.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:32.081Z,1478843432.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:32.117Z,1478843432.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:32.485Z,1478843432.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:32.517Z,1478843432.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:32.877Z,1478843432.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:32.920Z,1478843432.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:33.279Z,1478843433.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:33.319Z,1478843433.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:33.689Z,1478843433.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:33.716Z,1478843433.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:34.084Z,1478843434.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:34.100Z,1478843434.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:34.486Z,1478843434.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:34.501Z,1478843434.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:34.884Z,1478843434.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:34.905Z,1478843434.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:38.479Z,1478843438.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:38.494Z,1478843438.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:38.604Z,1478843438.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:38.669Z,1478843438.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:38.953Z,1478843438.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:38.968Z,1478843438.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:39.356Z,1478843439.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:39.377Z,1478843439.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:39.754Z,1478843439.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:39.773Z,1478843439.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:40.151Z,1478843440.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:40.173Z,1478843440.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:40.549Z,1478843440.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:40.570Z,1478843440.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:40.952Z,1478843440.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:40.968Z,1478843440.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:41.353Z,1478843441.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:41.368Z,1478843441.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:41.745Z,1478843441.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:41.780Z,1478843441.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:42.145Z,1478843442.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:42.162Z,1478843442.161 [BPC1](ERROR): Failed to receive battery data
2016-11-11T05:50:42.162Z,1478843442.162 [BPC1] Communications Fault, FailCount= 1
2016-11-11T05:50:42.162Z,1478843442.162 [BPC1](ERROR): Communications Fault
2016-11-11T05:50:42.178Z,1478843442.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:42.219Z,1478843442.219 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T05:50:42.545Z,1478843442.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:42.588Z,1478843442.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:42.945Z,1478843442.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:42.985Z,1478843442.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:43.349Z,1478843443.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:43.364Z,1478843443.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:43.408Z,1478843443.408 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:50:43.408Z,1478843443.408 [BPC1] No Fault, FailCount= 1
2016-11-11T05:50:43.757Z,1478843443.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:43.835Z,1478843443.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:44.152Z,1478843444.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:44.205Z,1478843444.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:44.549Z,1478843444.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:44.564Z,1478843444.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:44.950Z,1478843444.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:44.993Z,1478843444.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:45.352Z,1478843445.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:45.368Z,1478843445.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:45.752Z,1478843445.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:45.768Z,1478843445.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:46.152Z,1478843446.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:46.173Z,1478843446.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:46.557Z,1478843446.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:46.572Z,1478843446.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:46.792Z,1478843446.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:46.960Z,1478843446.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:46.976Z,1478843446.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:47.344Z,1478843447.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:47.378Z,1478843447.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:47.589Z,1478843447.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:47.761Z,1478843447.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:47.776Z,1478843447.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:47.996Z,1478843447.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:48.145Z,1478843448.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:48.177Z,1478843448.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:48.545Z,1478843448.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:48.580Z,1478843448.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:48.945Z,1478843448.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:48.976Z,1478843448.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:49.345Z,1478843449.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:49.376Z,1478843449.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:49.745Z,1478843449.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:49.781Z,1478843449.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:50.145Z,1478843450.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:50.161Z,1478843450.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:50.545Z,1478843450.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:50.565Z,1478843450.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:50.950Z,1478843450.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:50.973Z,1478843450.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:51.353Z,1478843451.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:51.385Z,1478843451.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:51.745Z,1478843451.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:51.765Z,1478843451.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:52.149Z,1478843452.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:52.184Z,1478843452.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:52.557Z,1478843452.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:52.577Z,1478843452.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:52.953Z,1478843452.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:52.968Z,1478843452.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:53.353Z,1478843453.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:53.373Z,1478843453.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:53.760Z,1478843453.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:53.776Z,1478843453.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:54.155Z,1478843454.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:54.178Z,1478843454.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:54.545Z,1478843454.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:54.578Z,1478843454.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:54.945Z,1478843454.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:54.981Z,1478843454.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:55.346Z,1478843455.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:55.381Z,1478843455.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:55.754Z,1478843455.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:55.781Z,1478843455.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:56.146Z,1478843456.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:56.182Z,1478843456.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:56.546Z,1478843456.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:56.621Z,1478843456.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:56.946Z,1478843456.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:56.974Z,1478843456.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:57.352Z,1478843457.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:57.404Z,1478843457.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:57.758Z,1478843457.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:57.777Z,1478843457.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:58.152Z,1478843458.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:58.209Z,1478843458.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:58.552Z,1478843458.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:58.604Z,1478843458.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:58.952Z,1478843458.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:58.971Z,1478843458.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:59.352Z,1478843459.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:59.367Z,1478843459.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:50:59.745Z,1478843459.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:50:59.771Z,1478843459.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:00.152Z,1478843460.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:00.172Z,1478843460.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:00.556Z,1478843460.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:00.571Z,1478843460.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:00.945Z,1478843460.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:00.979Z,1478843460.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:01.345Z,1478843461.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:01.377Z,1478843461.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:01.745Z,1478843461.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:01.770Z,1478843461.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:02.145Z,1478843462.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:02.177Z,1478843462.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:02.545Z,1478843462.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:02.577Z,1478843462.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:02.945Z,1478843462.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:02.979Z,1478843462.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:03.345Z,1478843463.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:03.378Z,1478843463.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:03.745Z,1478843463.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:03.777Z,1478843463.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:04.145Z,1478843464.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:04.178Z,1478843464.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:04.545Z,1478843464.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:04.578Z,1478843464.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:04.945Z,1478843464.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:04.977Z,1478843464.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:05.345Z,1478843465.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:05.381Z,1478843465.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:05.756Z,1478843465.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:05.780Z,1478843465.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:06.149Z,1478843466.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:06.181Z,1478843466.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:06.549Z,1478843466.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:06.574Z,1478843466.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:06.949Z,1478843466.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:06.974Z,1478843466.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:07.345Z,1478843467.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:07.370Z,1478843467.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:07.760Z,1478843467.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:07.776Z,1478843467.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:08.145Z,1478843468.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:08.181Z,1478843468.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:08.545Z,1478843468.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:08.577Z,1478843468.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:08.945Z,1478843468.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:08.981Z,1478843468.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:09.345Z,1478843469.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:09.381Z,1478843469.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:09.745Z,1478843469.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:09.754Z,1478843469.754 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T05:51:09.754Z,1478843469.754 [BPC1] Data Fault, FailCount= 1
2016-11-11T05:51:09.754Z,1478843469.754 [BPC1](ERROR): Data Fault
2016-11-11T05:51:09.789Z,1478843469.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:09.826Z,1478843469.826 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:51:10.145Z,1478843470.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:10.181Z,1478843470.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:10.545Z,1478843470.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:10.581Z,1478843470.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:10.756Z,1478843470.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:10.945Z,1478843470.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:10.968Z,1478843470.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:11.007Z,1478843471.007 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:51:11.007Z,1478843471.007 [BPC1] No Fault, FailCount= 1
2016-11-11T05:51:11.345Z,1478843471.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:11.422Z,1478843471.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:11.552Z,1478843471.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:11.745Z,1478843471.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:11.794Z,1478843471.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:11.956Z,1478843471.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:12.145Z,1478843472.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:12.165Z,1478843472.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:12.545Z,1478843472.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:12.565Z,1478843472.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:12.752Z,1478843472.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:12.950Z,1478843472.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:12.969Z,1478843472.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:13.352Z,1478843473.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:13.368Z,1478843473.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:13.549Z,1478843473.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:13.757Z,1478843473.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:13.772Z,1478843473.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:13.964Z,1478843473.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:14.152Z,1478843474.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:14.166Z,1478843474.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:14.552Z,1478843474.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:14.567Z,1478843474.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:14.760Z,1478843474.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:14.953Z,1478843474.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:14.973Z,1478843474.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:15.352Z,1478843475.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:15.373Z,1478843475.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:15.556Z,1478843475.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:15.760Z,1478843475.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:15.775Z,1478843475.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:15.964Z,1478843475.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:16.145Z,1478843476.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:16.178Z,1478843476.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:16.545Z,1478843476.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:16.570Z,1478843476.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:16.760Z,1478843476.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:16.949Z,1478843476.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:16.975Z,1478843476.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:17.345Z,1478843477.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:17.376Z,1478843477.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:17.556Z,1478843477.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:17.745Z,1478843477.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:17.788Z,1478843477.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:17.965Z,1478843477.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:18.145Z,1478843478.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:18.185Z,1478843478.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:18.545Z,1478843478.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:18.560Z,1478843478.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:18.760Z,1478843478.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:18.949Z,1478843478.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:18.969Z,1478843478.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:19.357Z,1478843479.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:19.372Z,1478843479.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:19.556Z,1478843479.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:19.757Z,1478843479.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:19.772Z,1478843479.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:19.964Z,1478843479.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:20.151Z,1478843480.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:20.173Z,1478843480.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:20.555Z,1478843480.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:20.571Z,1478843480.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:20.760Z,1478843480.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:20.956Z,1478843480.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:20.977Z,1478843480.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:21.353Z,1478843481.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:21.368Z,1478843481.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:21.556Z,1478843481.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:21.760Z,1478843481.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:21.776Z,1478843481.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:21.964Z,1478843481.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:22.156Z,1478843482.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:22.182Z,1478843482.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:22.545Z,1478843482.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:22.588Z,1478843482.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:22.760Z,1478843482.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:22.950Z,1478843482.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:22.985Z,1478843482.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:23.345Z,1478843483.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:23.385Z,1478843483.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:23.556Z,1478843483.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:23.756Z,1478843483.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:23.842Z,1478843483.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:23.964Z,1478843483.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:24.157Z,1478843484.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:24.172Z,1478843484.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:24.551Z,1478843484.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:24.604Z,1478843484.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:24.760Z,1478843484.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:24.951Z,1478843484.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:24.978Z,1478843484.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:25.355Z,1478843485.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:25.407Z,1478843485.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:25.556Z,1478843485.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:25.749Z,1478843485.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:25.812Z,1478843485.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:26.153Z,1478843486.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:26.173Z,1478843486.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:26.272Z,1478843486.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:26.556Z,1478843486.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:26.572Z,1478843486.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:26.961Z,1478843486.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:26.975Z,1478843486.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:27.068Z,1478843487.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:27.345Z,1478843487.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:27.370Z,1478843487.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:27.749Z,1478843487.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:27.775Z,1478843487.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:27.864Z,1478843487.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:28.145Z,1478843488.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:28.181Z,1478843488.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:28.272Z,1478843488.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:28.545Z,1478843488.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:28.581Z,1478843488.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:28.945Z,1478843488.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:28.977Z,1478843488.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:29.068Z,1478843489.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:29.345Z,1478843489.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:29.360Z,1478843489.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:29.750Z,1478843489.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:29.777Z,1478843489.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:29.864Z,1478843489.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:30.145Z,1478843490.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:30.170Z,1478843490.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:30.272Z,1478843490.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:30.545Z,1478843490.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:30.579Z,1478843490.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:30.952Z,1478843490.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:30.999Z,1478843490.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:31.068Z,1478843491.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:31.361Z,1478843491.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:31.381Z,1478843491.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:31.564Z,1478843491.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:31.749Z,1478843491.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:31.781Z,1478843491.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:32.145Z,1478843492.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:32.182Z,1478843492.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:32.360Z,1478843492.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:32.545Z,1478843492.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:32.578Z,1478843492.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:32.946Z,1478843492.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:32.977Z,1478843492.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:33.159Z,1478843493.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:33.345Z,1478843493.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:33.382Z,1478843493.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:33.564Z,1478843493.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:33.746Z,1478843493.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:33.777Z,1478843493.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:34.146Z,1478843494.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:34.181Z,1478843494.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:34.361Z,1478843494.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:34.545Z,1478843494.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:34.582Z,1478843494.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:34.950Z,1478843494.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:34.983Z,1478843494.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:35.157Z,1478843495.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:35.564Z,1478843495.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:36.360Z,1478843496.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:37.156Z,1478843497.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:37.576Z,1478843497.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:38.345Z,1478843498.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:38.372Z,1478843498.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:38.429Z,1478843498.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:38.518Z,1478843498.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:38.553Z,1478843498.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:38.904Z,1478843498.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:38.953Z,1478843498.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:39.169Z,1478843499.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:39.305Z,1478843499.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:39.320Z,1478843499.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:39.612Z,1478843499.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:39.699Z,1478843499.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:39.752Z,1478843499.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:40.107Z,1478843500.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:40.161Z,1478843500.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:40.408Z,1478843500.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:40.500Z,1478843500.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:40.515Z,1478843500.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:40.899Z,1478843500.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:40.918Z,1478843500.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:41.204Z,1478843501.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:41.309Z,1478843501.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:41.329Z,1478843501.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:41.693Z,1478843501.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:41.725Z,1478843501.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:41.932Z,1478843501.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:42.093Z,1478843502.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:42.125Z,1478843502.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:42.493Z,1478843502.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:42.526Z,1478843502.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:42.728Z,1478843502.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:42.897Z,1478843502.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:42.929Z,1478843502.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:43.293Z,1478843503.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:43.329Z,1478843503.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:43.524Z,1478843503.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:43.693Z,1478843503.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:43.728Z,1478843503.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:43.932Z,1478843503.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:44.093Z,1478843504.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:44.125Z,1478843504.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:44.493Z,1478843504.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:44.517Z,1478843504.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:44.728Z,1478843504.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:44.893Z,1478843504.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:44.929Z,1478843504.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:45.293Z,1478843505.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:45.324Z,1478843505.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:45.524Z,1478843505.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:45.693Z,1478843505.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:45.733Z,1478843505.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:45.932Z,1478843505.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:46.101Z,1478843506.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:46.137Z,1478843506.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:46.493Z,1478843506.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:46.508Z,1478843506.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:46.728Z,1478843506.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:46.893Z,1478843506.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:46.908Z,1478843506.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:47.305Z,1478843507.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:47.320Z,1478843507.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:47.524Z,1478843507.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:47.705Z,1478843507.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:47.720Z,1478843507.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:47.936Z,1478843507.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:48.100Z,1478843508.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:48.115Z,1478843508.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:48.500Z,1478843508.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:48.515Z,1478843508.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:48.732Z,1478843508.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:48.900Z,1478843508.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:48.915Z,1478843508.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:49.308Z,1478843509.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:49.324Z,1478843509.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:49.528Z,1478843509.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:49.704Z,1478843509.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:49.732Z,1478843509.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:49.932Z,1478843509.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:50.093Z,1478843510.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:50.118Z,1478843510.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:50.493Z,1478843510.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:50.525Z,1478843510.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:50.728Z,1478843510.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:50.897Z,1478843510.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:50.922Z,1478843510.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:51.301Z,1478843511.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:51.337Z,1478843511.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:51.524Z,1478843511.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:51.693Z,1478843511.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:51.729Z,1478843511.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:51.932Z,1478843511.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:52.093Z,1478843512.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:52.177Z,1478843512.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:52.493Z,1478843512.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:52.520Z,1478843512.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:52.728Z,1478843512.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:52.900Z,1478843512.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:52.916Z,1478843512.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:53.305Z,1478843513.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:53.361Z,1478843513.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:53.524Z,1478843513.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:53.705Z,1478843513.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:53.720Z,1478843513.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:53.932Z,1478843513.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:54.100Z,1478843514.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:54.157Z,1478843514.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:54.493Z,1478843514.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:54.551Z,1478843514.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:54.728Z,1478843514.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:54.893Z,1478843514.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:54.927Z,1478843514.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:55.293Z,1478843515.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:55.325Z,1478843515.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:55.524Z,1478843515.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:55.705Z,1478843515.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:55.720Z,1478843515.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:55.932Z,1478843515.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:56.100Z,1478843516.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:56.115Z,1478843516.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:56.500Z,1478843516.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:56.515Z,1478843516.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:56.728Z,1478843516.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:56.908Z,1478843516.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:56.924Z,1478843516.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:57.293Z,1478843517.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:57.322Z,1478843517.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:57.524Z,1478843517.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:57.693Z,1478843517.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:57.718Z,1478843517.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:57.932Z,1478843517.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:58.104Z,1478843518.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:58.127Z,1478843518.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:58.493Z,1478843518.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:58.528Z,1478843518.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:58.728Z,1478843518.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:58.893Z,1478843518.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:58.924Z,1478843518.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:59.301Z,1478843519.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:59.326Z,1478843519.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:51:59.524Z,1478843519.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:59.701Z,1478843519.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:51:59.732Z,1478843519.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:00.093Z,1478843520.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:00.108Z,1478843520.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:00.320Z,1478843520.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:00.493Z,1478843520.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:00.513Z,1478843520.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:00.898Z,1478843520.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:00.913Z,1478843520.913 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:00.914Z,1478843520.914 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2016-11-11T05:52:00.914Z,1478843520.914 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:52:00.933Z,1478843520.934 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:00.934Z,1478843520.934 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2016-11-11T05:52:00.934Z,1478843520.934 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:52:00.960Z,1478843520.960 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:52:00.961Z,1478843520.961 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:52:01.117Z,1478843521.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:01.306Z,1478843521.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:01.363Z,1478843521.363 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:52:01.367Z,1478843521.367 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2016-11-11T05:52:01.368Z,1478843521.368 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:52:01.368Z,1478843521.368 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2016-11-11T05:52:01.528Z,1478843521.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:01.697Z,1478843521.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:01.711Z,1478843521.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:52:01.715Z,1478843521.715 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:52:01.716Z,1478843521.716 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:52:01.725Z,1478843521.725 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:52:01.725Z,1478843521.725 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:52:01.726Z,1478843521.726 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:52:02.100Z,1478843522.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:02.121Z,1478843522.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:02.324Z,1478843522.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:02.496Z,1478843522.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:02.529Z,1478843522.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:02.905Z,1478843522.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:02.920Z,1478843522.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:03.120Z,1478843523.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:03.314Z,1478843523.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:03.329Z,1478843523.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:03.528Z,1478843523.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:03.694Z,1478843523.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:03.722Z,1478843523.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:04.098Z,1478843524.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:04.129Z,1478843524.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:04.324Z,1478843524.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:04.493Z,1478843524.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:04.525Z,1478843524.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:04.893Z,1478843524.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:04.910Z,1478843524.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:04.942Z,1478843524.942 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:04.942Z,1478843524.942 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2016-11-11T05:52:04.942Z,1478843524.943 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:52:04.975Z,1478843524.975 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:52:05.122Z,1478843525.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:05.293Z,1478843525.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:05.314Z,1478843525.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:05.376Z,1478843525.376 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:52:05.377Z,1478843525.376 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2016-11-11T05:52:05.528Z,1478843525.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:05.696Z,1478843525.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:05.712Z,1478843525.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:05.718Z,1478843525.718 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:52:05.719Z,1478843525.719 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:52:05.719Z,1478843525.719 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:52:06.099Z,1478843526.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:06.118Z,1478843526.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:06.324Z,1478843526.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:06.504Z,1478843526.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:06.557Z,1478843526.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:06.900Z,1478843526.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:06.934Z,1478843526.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:07.121Z,1478843527.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:07.308Z,1478843527.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:07.324Z,1478843527.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:07.568Z,1478843527.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:07.693Z,1478843527.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:07.749Z,1478843527.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:08.093Z,1478843528.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:08.128Z,1478843528.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:08.364Z,1478843528.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:08.493Z,1478843528.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:08.542Z,1478843528.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:08.893Z,1478843528.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:08.939Z,1478843528.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:09.162Z,1478843529.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:09.297Z,1478843529.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:09.329Z,1478843529.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:09.700Z,1478843529.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:09.716Z,1478843529.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:09.868Z,1478843529.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:10.100Z,1478843530.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:10.115Z,1478843530.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:10.499Z,1478843530.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:10.521Z,1478843530.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:10.664Z,1478843530.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:10.893Z,1478843530.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:10.929Z,1478843530.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:11.300Z,1478843531.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:11.315Z,1478843531.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:11.461Z,1478843531.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:11.700Z,1478843531.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:11.714Z,1478843531.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:11.872Z,1478843531.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:12.101Z,1478843532.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:12.116Z,1478843532.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:12.493Z,1478843532.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:12.526Z,1478843532.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:12.668Z,1478843532.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:12.893Z,1478843532.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:12.927Z,1478843532.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:13.293Z,1478843533.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:13.319Z,1478843533.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:13.464Z,1478843533.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:13.693Z,1478843533.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:13.726Z,1478843533.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:13.872Z,1478843533.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:14.093Z,1478843534.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:14.126Z,1478843534.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:14.493Z,1478843534.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:14.525Z,1478843534.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:14.668Z,1478843534.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:14.893Z,1478843534.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:14.928Z,1478843534.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:15.293Z,1478843535.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:15.329Z,1478843535.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:15.464Z,1478843535.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:15.693Z,1478843535.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:15.724Z,1478843535.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:15.868Z,1478843535.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:16.097Z,1478843536.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:16.132Z,1478843536.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:16.497Z,1478843536.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:16.539Z,1478843536.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:16.666Z,1478843536.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:16.893Z,1478843536.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:16.913Z,1478843536.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:17.298Z,1478843537.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:17.317Z,1478843537.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:17.460Z,1478843537.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:17.705Z,1478843537.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:17.720Z,1478843537.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:17.868Z,1478843537.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:18.100Z,1478843538.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:18.115Z,1478843538.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:18.500Z,1478843538.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:18.515Z,1478843538.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:18.664Z,1478843538.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:18.903Z,1478843538.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:18.918Z,1478843538.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:19.300Z,1478843539.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:19.315Z,1478843539.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:19.460Z,1478843539.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:19.708Z,1478843539.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:19.729Z,1478843539.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:19.868Z,1478843539.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:20.093Z,1478843540.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:20.119Z,1478843540.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:20.493Z,1478843540.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:20.525Z,1478843540.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:20.664Z,1478843540.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:20.897Z,1478843540.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:20.953Z,1478843540.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:21.293Z,1478843541.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:21.358Z,1478843541.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:21.461Z,1478843541.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:21.693Z,1478843541.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:21.729Z,1478843541.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:21.868Z,1478843541.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:22.093Z,1478843542.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:22.145Z,1478843542.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:22.497Z,1478843542.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:22.529Z,1478843542.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:22.664Z,1478843542.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:22.893Z,1478843542.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:22.942Z,1478843542.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:23.293Z,1478843543.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:23.338Z,1478843543.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:23.460Z,1478843543.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:23.693Z,1478843543.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:23.728Z,1478843543.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:23.880Z,1478843543.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:24.096Z,1478843544.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:24.128Z,1478843544.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:24.493Z,1478843544.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:24.530Z,1478843544.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:24.676Z,1478843544.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:24.904Z,1478843544.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:24.925Z,1478843544.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:25.293Z,1478843545.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:25.325Z,1478843545.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:25.472Z,1478843545.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:25.475Z,1478843545.475 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T05:52:25.475Z,1478843545.475 [Rowe_600LCM] Communications Fault, FailCount= 4
2016-11-11T05:52:25.475Z,1478843545.475 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T05:52:25.693Z,1478843545.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:25.738Z,1478843545.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T05:52:25.744Z,1478843545.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:25.780Z,1478843545.780 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T05:52:25.879Z,1478843545.879 [Rowe_600LCM](INFO): Powering down
2016-11-11T05:52:26.097Z,1478843546.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:26.136Z,1478843546.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T05:52:26.137Z,1478843546.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:26.493Z,1478843546.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:26.508Z,1478843546.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T05:52:26.509Z,1478843546.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:26.687Z,1478843546.687 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2016-11-11T05:52:26.688Z,1478843546.688 [Rowe_600LCM] Hardware Fault, FailCount= 4
2016-11-11T05:52:26.688Z,1478843546.688 [Rowe_600LCM](ERROR): Hardware Fault
2016-11-11T05:52:26.893Z,1478843546.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:26.912Z,1478843546.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T05:52:26.913Z,1478843546.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:27.301Z,1478843547.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:27.315Z,1478843547.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T05:52:27.317Z,1478843547.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:27.368Z,1478843547.368 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T05:52:27.368Z,1478843547.368 [Rowe_600LCM] No Fault, FailCount= 4
2016-11-11T05:52:27.495Z,1478843547.495 [Rowe_600LCM](INFO): Initializing
2016-11-11T05:52:27.496Z,1478843547.496 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T05:52:27.496Z,1478843547.496 [Rowe_600LCM](INFO): LCM OK
2016-11-11T05:52:27.496Z,1478843547.496 [Rowe_600LCM](INFO): Powering up
2016-11-11T05:52:27.699Z,1478843547.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:27.714Z,1478843547.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T05:52:27.715Z,1478843547.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:28.099Z,1478843548.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:28.120Z,1478843548.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T05:52:28.121Z,1478843548.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:28.497Z,1478843548.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:28.517Z,1478843548.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T05:52:28.518Z,1478843548.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:28.900Z,1478843548.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:28.914Z,1478843548.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T05:52:28.916Z,1478843548.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:29.301Z,1478843549.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:29.316Z,1478843549.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T05:52:29.318Z,1478843549.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:29.700Z,1478843549.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:29.722Z,1478843549.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T05:52:29.724Z,1478843549.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:30.093Z,1478843550.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:30.120Z,1478843550.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T05:52:30.121Z,1478843550.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:30.493Z,1478843550.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:30.517Z,1478843550.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T05:52:30.519Z,1478843550.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:30.897Z,1478843550.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:30.935Z,1478843550.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T05:52:30.936Z,1478843550.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:31.297Z,1478843551.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:31.329Z,1478843551.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T05:52:31.330Z,1478843551.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:31.624Z,1478843551.624 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T05:52:31.696Z,1478843551.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:31.746Z,1478843551.746 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T05:52:31.748Z,1478843551.748 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T05:52:31.749Z,1478843551.749 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T05:52:31.750Z,1478843551.750 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T05:52:31.751Z,1478843551.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T05:52:31.752Z,1478843551.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:32.104Z,1478843552.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:32.145Z,1478843552.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T05:52:32.146Z,1478843552.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:32.504Z,1478843552.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:32.564Z,1478843552.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:32.901Z,1478843552.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:32.938Z,1478843552.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:33.297Z,1478843553.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:33.338Z,1478843553.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:33.697Z,1478843553.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:33.737Z,1478843553.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:34.093Z,1478843554.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:34.137Z,1478843554.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:34.501Z,1478843554.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:34.533Z,1478843554.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:34.893Z,1478843554.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:34.945Z,1478843554.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:35.297Z,1478843555.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:35.388Z,1478843555.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:38.768Z,1478843558.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:38.793Z,1478843558.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:38.890Z,1478843558.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:38.930Z,1478843558.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:39.248Z,1478843559.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:39.294Z,1478843559.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:39.648Z,1478843559.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:39.700Z,1478843559.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:40.065Z,1478843560.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:40.103Z,1478843560.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:40.448Z,1478843560.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:40.508Z,1478843560.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:40.844Z,1478843560.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:40.885Z,1478843560.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:41.248Z,1478843561.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:41.269Z,1478843561.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:41.641Z,1478843561.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:41.676Z,1478843561.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:42.062Z,1478843562.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:42.082Z,1478843562.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:42.441Z,1478843562.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:42.472Z,1478843562.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:42.841Z,1478843562.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:42.877Z,1478843562.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:43.241Z,1478843563.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:43.277Z,1478843563.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:43.641Z,1478843563.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:43.665Z,1478843563.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:44.049Z,1478843564.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:44.088Z,1478843564.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:44.449Z,1478843564.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:44.484Z,1478843564.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:44.844Z,1478843564.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:44.860Z,1478843564.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:45.247Z,1478843565.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:45.269Z,1478843565.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:45.648Z,1478843565.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:45.673Z,1478843565.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:46.079Z,1478843566.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:46.125Z,1478843566.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:46.445Z,1478843566.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:46.477Z,1478843566.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:46.841Z,1478843566.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:46.884Z,1478843566.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:47.241Z,1478843567.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:47.256Z,1478843567.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:47.641Z,1478843567.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:47.661Z,1478843567.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:48.041Z,1478843568.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:48.061Z,1478843568.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:48.460Z,1478843568.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:48.488Z,1478843568.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:48.849Z,1478843568.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:48.863Z,1478843568.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:49.248Z,1478843569.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:49.269Z,1478843569.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:49.644Z,1478843569.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:49.672Z,1478843569.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:50.049Z,1478843570.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:50.069Z,1478843570.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:50.442Z,1478843570.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:50.481Z,1478843570.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:50.845Z,1478843570.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:50.878Z,1478843570.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:51.241Z,1478843571.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:51.277Z,1478843571.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:51.641Z,1478843571.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:51.674Z,1478843571.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:52.079Z,1478843572.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:52.095Z,1478843572.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:52.441Z,1478843572.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:52.493Z,1478843572.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:52.845Z,1478843572.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:52.881Z,1478843572.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:53.242Z,1478843573.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:53.285Z,1478843573.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:53.641Z,1478843573.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:53.669Z,1478843573.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:54.052Z,1478843574.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:54.107Z,1478843574.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:54.451Z,1478843574.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:54.505Z,1478843574.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:54.841Z,1478843574.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:54.876Z,1478843574.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:55.241Z,1478843575.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:55.290Z,1478843575.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:55.641Z,1478843575.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:55.674Z,1478843575.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:56.044Z,1478843576.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:56.116Z,1478843576.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:56.445Z,1478843576.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:56.482Z,1478843576.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:56.841Z,1478843576.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:56.877Z,1478843576.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:57.246Z,1478843577.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:57.261Z,1478843577.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:57.649Z,1478843577.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:57.664Z,1478843577.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:58.047Z,1478843578.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:58.062Z,1478843578.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:58.448Z,1478843578.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:58.463Z,1478843578.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:58.851Z,1478843578.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:58.866Z,1478843578.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:59.248Z,1478843579.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:59.264Z,1478843579.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:52:59.649Z,1478843579.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:52:59.670Z,1478843579.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:00.083Z,1478843580.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:00.132Z,1478843580.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:00.441Z,1478843580.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:00.474Z,1478843580.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:00.841Z,1478843580.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:00.874Z,1478843580.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:01.245Z,1478843581.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:01.302Z,1478843581.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:01.638Z,1478843581.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:01.685Z,1478843581.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:02.041Z,1478843582.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:02.072Z,1478843582.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:02.449Z,1478843582.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:02.476Z,1478843582.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:02.841Z,1478843582.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:02.875Z,1478843582.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:03.241Z,1478843583.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:03.268Z,1478843583.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:03.645Z,1478843583.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:03.682Z,1478843583.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:04.041Z,1478843584.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:04.061Z,1478843584.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:04.449Z,1478843584.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:04.479Z,1478843584.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:04.849Z,1478843584.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:04.869Z,1478843584.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:05.248Z,1478843585.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:05.263Z,1478843585.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:05.650Z,1478843585.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:05.670Z,1478843585.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:06.043Z,1478843586.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:06.101Z,1478843586.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:06.442Z,1478843586.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:06.477Z,1478843586.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:06.859Z,1478843586.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:06.905Z,1478843586.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:07.264Z,1478843587.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:07.298Z,1478843587.298 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T05:53:07.298Z,1478843587.298 [BPC1] Data Fault, FailCount= 1
2016-11-11T05:53:07.298Z,1478843587.298 [BPC1](ERROR): Data Fault
2016-11-11T05:53:07.324Z,1478843587.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:07.401Z,1478843587.401 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:53:07.650Z,1478843587.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:07.699Z,1478843587.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:08.050Z,1478843588.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:08.117Z,1478843588.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:08.450Z,1478843588.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:08.474Z,1478843588.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:08.535Z,1478843588.535 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:53:08.535Z,1478843588.535 [BPC1] No Fault, FailCount= 1
2016-11-11T05:53:08.843Z,1478843588.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:08.957Z,1478843588.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:09.243Z,1478843589.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:09.290Z,1478843589.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:09.643Z,1478843589.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:09.721Z,1478843589.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:10.049Z,1478843590.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:10.097Z,1478843590.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:10.451Z,1478843590.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:10.485Z,1478843590.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:10.843Z,1478843590.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:10.888Z,1478843590.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:11.243Z,1478843591.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:11.292Z,1478843591.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:11.646Z,1478843591.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:11.699Z,1478843591.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:12.043Z,1478843592.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:12.091Z,1478843592.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:12.449Z,1478843592.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:12.512Z,1478843592.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:12.843Z,1478843592.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:12.885Z,1478843592.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:13.243Z,1478843593.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:13.279Z,1478843593.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:13.643Z,1478843593.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:13.692Z,1478843593.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:14.066Z,1478843594.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:14.106Z,1478843594.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:14.446Z,1478843594.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:14.500Z,1478843594.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:14.842Z,1478843594.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:14.897Z,1478843594.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:15.251Z,1478843595.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:15.273Z,1478843595.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:15.645Z,1478843595.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:15.686Z,1478843595.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:16.041Z,1478843596.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:16.070Z,1478843596.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:16.473Z,1478843596.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:16.497Z,1478843596.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:16.846Z,1478843596.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:16.877Z,1478843596.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:17.252Z,1478843597.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:17.259Z,1478843597.259 [PNI_TCM](ERROR): CRC does not match. Expected:0x55178 got:0x4384
2016-11-11T05:53:17.285Z,1478843597.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:17.640Z,1478843597.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:17.682Z,1478843597.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:18.066Z,1478843598.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:18.081Z,1478843598.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:18.444Z,1478843598.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:18.506Z,1478843598.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:18.844Z,1478843598.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:18.893Z,1478843598.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:19.251Z,1478843599.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:19.296Z,1478843599.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:19.648Z,1478843599.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:19.678Z,1478843599.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:20.054Z,1478843600.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:20.081Z,1478843600.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:20.444Z,1478843600.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:20.474Z,1478843600.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:20.843Z,1478843600.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:20.886Z,1478843600.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:21.243Z,1478843601.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:21.306Z,1478843601.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:21.648Z,1478843601.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:21.789Z,1478843601.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:22.045Z,1478843602.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:22.065Z,1478843602.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:22.444Z,1478843602.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:22.497Z,1478843602.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:22.851Z,1478843602.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:22.911Z,1478843602.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:23.246Z,1478843603.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:23.317Z,1478843603.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:23.646Z,1478843603.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:23.697Z,1478843603.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:24.042Z,1478843604.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:24.072Z,1478843604.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:24.448Z,1478843604.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:24.495Z,1478843604.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:24.848Z,1478843604.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:24.895Z,1478843604.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:25.255Z,1478843605.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:25.305Z,1478843605.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:25.649Z,1478843605.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:25.702Z,1478843605.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:26.052Z,1478843606.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:26.059Z,1478843606.059 [PNI_TCM](ERROR): CRC does not match. Expected:0x8960 got:0x14098
2016-11-11T05:53:26.081Z,1478843606.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:26.459Z,1478843606.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:26.475Z,1478843606.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:26.843Z,1478843606.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:26.875Z,1478843606.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:27.241Z,1478843607.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:27.278Z,1478843607.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:27.641Z,1478843607.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:27.680Z,1478843607.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:28.051Z,1478843608.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:28.091Z,1478843608.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:28.446Z,1478843608.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:28.462Z,1478843608.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:28.846Z,1478843608.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:28.886Z,1478843608.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:29.250Z,1478843609.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:29.257Z,1478843609.257 [PNI_TCM](ERROR): CRC does not match. Expected:0x45351 got:0x43805
2016-11-11T05:53:29.299Z,1478843609.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:29.650Z,1478843609.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:29.665Z,1478843609.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:30.049Z,1478843610.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:30.064Z,1478843610.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:30.458Z,1478843610.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:30.473Z,1478843610.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:30.847Z,1478843610.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:30.869Z,1478843610.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:31.250Z,1478843611.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:31.266Z,1478843611.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:31.652Z,1478843611.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:31.668Z,1478843611.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:32.056Z,1478843612.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:32.071Z,1478843612.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:32.459Z,1478843612.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:32.474Z,1478843612.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:32.847Z,1478843612.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:32.882Z,1478843612.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:33.245Z,1478843613.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:33.281Z,1478843613.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:33.641Z,1478843613.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:33.681Z,1478843613.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:34.044Z,1478843614.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:34.050Z,1478843614.050 [PNI_TCM](ERROR): CRC does not match. Expected:0x35810 got:0x16849
2016-11-11T05:53:34.089Z,1478843614.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:34.457Z,1478843614.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:34.489Z,1478843614.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:34.497Z,1478843614.497 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T05:53:34.498Z,1478843614.498 [Default:CheckIn:C.Wait] Stopped
2016-11-11T05:53:34.498Z,1478843614.498 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T05:53:34.498Z,1478843614.498 [Default:CheckIn:D] Running Loop=1
2016-11-11T05:53:34.844Z,1478843614.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:34.871Z,1478843614.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:34.900Z,1478843614.899 [Default:CheckIn:D] Stopped
2016-11-11T05:53:34.900Z,1478843614.900 [Default:CheckIn:E] Running Loop=1
2016-11-11T05:53:35.255Z,1478843615.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:35.271Z,1478843615.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:35.296Z,1478843615.296 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 63.559823 min 
2016-11-11T05:53:35.296Z,1478843615.296 [Default:CheckIn:E] Stopped
2016-11-11T05:53:35.296Z,1478843615.296 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T05:53:35.296Z,1478843615.296 [Default:CheckIn] Stopped
2016-11-11T05:53:35.296Z,1478843615.296 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T05:53:35.296Z,1478843615.296 [Default:CheckIn](INFO): Running loop #7
2016-11-11T05:53:35.297Z,1478843615.297 [Default:CheckIn] Running Loop=7
2016-11-11T05:53:35.297Z,1478843615.297 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T05:53:35.297Z,1478843615.297 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T05:53:35.649Z,1478843615.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:35.721Z,1478843615.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:39.076Z,1478843619.076 [NAL9602](INFO): Powering up
2016-11-11T05:53:39.132Z,1478843619.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:39.177Z,1478843619.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:39.297Z,1478843619.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:39.317Z,1478843619.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:39.684Z,1478843619.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:39.699Z,1478843619.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:40.089Z,1478843620.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:40.145Z,1478843620.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:40.489Z,1478843620.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:40.504Z,1478843620.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:40.883Z,1478843620.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:40.931Z,1478843620.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:41.288Z,1478843621.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:41.339Z,1478843621.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:41.684Z,1478843621.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:41.700Z,1478843621.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:42.085Z,1478843622.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:42.100Z,1478843622.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:42.490Z,1478843622.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:42.510Z,1478843622.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:42.884Z,1478843622.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:42.900Z,1478843622.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:43.277Z,1478843623.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:43.310Z,1478843623.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:43.684Z,1478843623.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:43.706Z,1478843623.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:44.077Z,1478843624.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:44.109Z,1478843624.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:44.488Z,1478843624.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:44.510Z,1478843624.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:44.881Z,1478843624.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:44.913Z,1478843624.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:45.277Z,1478843625.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:45.309Z,1478843625.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:45.677Z,1478843625.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:45.710Z,1478843625.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:46.081Z,1478843626.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:46.113Z,1478843626.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:46.488Z,1478843626.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:46.514Z,1478843626.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:46.877Z,1478843626.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:46.913Z,1478843626.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:47.280Z,1478843627.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:47.313Z,1478843627.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:47.677Z,1478843627.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:47.704Z,1478843627.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:48.076Z,1478843628.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:48.090Z,1478843628.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:48.493Z,1478843628.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:48.524Z,1478843628.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:48.877Z,1478843628.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:48.905Z,1478843628.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:49.289Z,1478843629.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:49.304Z,1478843629.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:49.697Z,1478843629.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:49.716Z,1478843629.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:50.061Z,1478843630.061 [NAL9602](INFO): NAL9602 initialized
2016-11-11T05:53:50.077Z,1478843630.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:50.108Z,1478843630.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:50.497Z,1478843630.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:50.514Z,1478843630.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:50.901Z,1478843630.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:50.929Z,1478843630.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:51.303Z,1478843631.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:51.319Z,1478843631.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:51.688Z,1478843631.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:51.721Z,1478843631.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:52.077Z,1478843632.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:52.097Z,1478843632.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:52.481Z,1478843632.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:52.501Z,1478843632.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:52.882Z,1478843632.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:52.897Z,1478843632.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:53.296Z,1478843633.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:53.337Z,1478843633.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:53.704Z,1478843633.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:53.745Z,1478843633.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:54.100Z,1478843634.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:54.121Z,1478843634.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:54.482Z,1478843634.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:54.511Z,1478843634.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:54.882Z,1478843634.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:54.929Z,1478843634.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:55.282Z,1478843635.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:55.297Z,1478843635.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:55.677Z,1478843635.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:55.721Z,1478843635.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:56.078Z,1478843636.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:56.121Z,1478843636.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:56.481Z,1478843636.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:56.498Z,1478843636.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:56.882Z,1478843636.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:56.897Z,1478843636.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:57.277Z,1478843637.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:57.293Z,1478843637.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:57.681Z,1478843637.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:57.696Z,1478843637.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:58.090Z,1478843638.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:58.110Z,1478843638.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:58.496Z,1478843638.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:58.512Z,1478843638.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:58.892Z,1478843638.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:58.913Z,1478843638.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:59.288Z,1478843639.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:59.302Z,1478843639.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:53:59.681Z,1478843639.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:53:59.705Z,1478843639.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:00.081Z,1478843640.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:00.096Z,1478843640.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:00.482Z,1478843640.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:00.496Z,1478843640.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:00.881Z,1478843640.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:00.901Z,1478843640.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:01.281Z,1478843641.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:01.296Z,1478843641.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:01.677Z,1478843641.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:01.692Z,1478843641.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:02.081Z,1478843642.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:02.101Z,1478843642.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:02.485Z,1478843642.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:02.505Z,1478843642.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:02.881Z,1478843642.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:02.896Z,1478843642.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:03.312Z,1478843643.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:03.333Z,1478843643.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:03.692Z,1478843643.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:03.707Z,1478843643.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:04.095Z,1478843644.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:04.117Z,1478843644.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:04.488Z,1478843644.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:04.503Z,1478843644.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:04.881Z,1478843644.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:04.896Z,1478843644.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:05.282Z,1478843645.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:05.296Z,1478843645.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:05.681Z,1478843645.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:05.701Z,1478843645.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:06.077Z,1478843646.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:06.092Z,1478843646.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:06.481Z,1478843646.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:06.496Z,1478843646.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:06.886Z,1478843646.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:06.905Z,1478843646.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:07.277Z,1478843647.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:07.297Z,1478843647.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:07.677Z,1478843647.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:07.697Z,1478843647.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:08.081Z,1478843648.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:08.101Z,1478843648.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:08.512Z,1478843648.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:08.605Z,1478843648.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:08.891Z,1478843648.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:08.906Z,1478843648.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:09.296Z,1478843649.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:09.341Z,1478843649.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:09.692Z,1478843649.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:09.707Z,1478843649.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:10.081Z,1478843650.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:10.122Z,1478843650.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:10.477Z,1478843650.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:10.521Z,1478843650.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:10.881Z,1478843650.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:10.896Z,1478843650.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:11.278Z,1478843651.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:11.292Z,1478843651.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:11.681Z,1478843651.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:11.701Z,1478843651.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:12.082Z,1478843652.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:12.097Z,1478843652.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:12.481Z,1478843652.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:12.496Z,1478843652.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:12.884Z,1478843652.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:12.908Z,1478843652.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:13.281Z,1478843653.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:13.296Z,1478843653.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:13.695Z,1478843653.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:13.710Z,1478843653.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:14.090Z,1478843654.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:14.110Z,1478843654.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:14.500Z,1478843654.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:14.515Z,1478843654.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:14.892Z,1478843654.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:14.907Z,1478843654.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:15.282Z,1478843655.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:15.301Z,1478843655.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:15.678Z,1478843655.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:15.699Z,1478843655.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:16.074Z,1478843656.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:16.105Z,1478843656.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:16.478Z,1478843656.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:16.505Z,1478843656.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:16.890Z,1478843656.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:16.917Z,1478843656.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:17.278Z,1478843657.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:17.305Z,1478843657.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:17.678Z,1478843657.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:17.705Z,1478843657.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:18.078Z,1478843658.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:18.097Z,1478843658.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:18.478Z,1478843658.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:18.505Z,1478843658.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:18.892Z,1478843658.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:18.920Z,1478843658.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:19.288Z,1478843659.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:19.317Z,1478843659.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:19.700Z,1478843659.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:19.729Z,1478843659.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:20.088Z,1478843660.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:20.113Z,1478843660.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:20.490Z,1478843660.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:20.514Z,1478843660.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:20.878Z,1478843660.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:20.901Z,1478843660.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:21.277Z,1478843661.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:21.297Z,1478843661.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:21.685Z,1478843661.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:21.725Z,1478843661.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:22.082Z,1478843662.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:22.112Z,1478843662.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:22.489Z,1478843662.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:22.537Z,1478843662.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:22.885Z,1478843662.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:22.937Z,1478843662.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:23.287Z,1478843663.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:23.301Z,1478843663.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:23.687Z,1478843663.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:23.740Z,1478843663.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:24.100Z,1478843664.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:24.115Z,1478843664.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:24.488Z,1478843664.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:24.538Z,1478843664.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:24.894Z,1478843664.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:24.941Z,1478843664.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:25.301Z,1478843665.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:25.321Z,1478843665.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:25.677Z,1478843665.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:25.712Z,1478843665.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:26.086Z,1478843666.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:26.107Z,1478843666.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:26.493Z,1478843666.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:26.508Z,1478843666.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:26.877Z,1478843666.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:26.912Z,1478843666.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:27.277Z,1478843667.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:27.309Z,1478843667.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:27.681Z,1478843667.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:27.713Z,1478843667.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:27.851Z,1478843667.851 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T05:54:27.851Z,1478843667.851 [Rowe_600LCM] Communications Fault, FailCount= 5
2016-11-11T05:54:27.851Z,1478843667.851 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T05:54:28.077Z,1478843668.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:28.091Z,1478843668.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T05:54:28.093Z,1478843668.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:28.151Z,1478843668.151 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T05:54:28.152Z,1478843668.152 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-11-11T05:54:28.255Z,1478843668.255 [Rowe_600LCM](INFO): Powering down
2016-11-11T05:54:28.491Z,1478843668.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:28.506Z,1478843668.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T05:54:28.507Z,1478843668.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:28.888Z,1478843668.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:28.903Z,1478843668.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T05:54:28.904Z,1478843668.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:29.299Z,1478843669.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:29.320Z,1478843669.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T05:54:29.321Z,1478843669.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:29.694Z,1478843669.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:29.709Z,1478843669.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T05:54:29.710Z,1478843669.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:30.103Z,1478843670.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:30.117Z,1478843670.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T05:54:30.119Z,1478843670.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:30.500Z,1478843670.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:30.520Z,1478843670.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T05:54:30.521Z,1478843670.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:30.877Z,1478843670.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:30.909Z,1478843670.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T05:54:30.910Z,1478843670.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:31.285Z,1478843671.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:31.317Z,1478843671.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T05:54:31.318Z,1478843671.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:31.677Z,1478843671.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:31.714Z,1478843671.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T05:54:31.715Z,1478843671.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:32.077Z,1478843672.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:32.112Z,1478843672.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T05:54:32.113Z,1478843672.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:32.486Z,1478843672.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:32.512Z,1478843672.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T05:54:32.513Z,1478843672.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:32.887Z,1478843672.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:32.923Z,1478843672.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T05:54:32.924Z,1478843672.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:33.278Z,1478843673.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:33.293Z,1478843673.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T05:54:33.294Z,1478843673.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:33.682Z,1478843673.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:33.697Z,1478843673.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T05:54:33.698Z,1478843673.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:34.081Z,1478843674.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:34.100Z,1478843674.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T05:54:34.101Z,1478843674.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:34.492Z,1478843674.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:34.523Z,1478843674.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T05:54:34.525Z,1478843674.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:34.897Z,1478843674.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:34.928Z,1478843674.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T05:54:34.929Z,1478843674.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:35.292Z,1478843675.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:35.312Z,1478843675.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T05:54:35.313Z,1478843675.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:35.689Z,1478843675.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:35.709Z,1478843675.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T05:54:35.710Z,1478843675.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:38.980Z,1478843678.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:39.058Z,1478843679.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2016-11-11T05:54:39.059Z,1478843679.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:39.202Z,1478843679.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:39.241Z,1478843679.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2016-11-11T05:54:39.242Z,1478843679.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:39.592Z,1478843679.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:39.637Z,1478843679.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2016-11-11T05:54:39.638Z,1478843679.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:39.984Z,1478843679.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:39.998Z,1478843679.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2016-11-11T05:54:39.999Z,1478843680.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:40.384Z,1478843680.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:40.428Z,1478843680.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2016-11-11T05:54:40.429Z,1478843680.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:40.788Z,1478843680.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:40.837Z,1478843680.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2016-11-11T05:54:40.838Z,1478843680.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:41.176Z,1478843681.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:41.191Z,1478843681.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2016-11-11T05:54:41.192Z,1478843681.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:41.572Z,1478843681.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:41.605Z,1478843681.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2016-11-11T05:54:41.606Z,1478843681.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:41.976Z,1478843681.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:41.991Z,1478843681.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2016-11-11T05:54:41.992Z,1478843681.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:42.377Z,1478843682.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:42.397Z,1478843682.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2016-11-11T05:54:42.398Z,1478843682.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:42.769Z,1478843682.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:42.795Z,1478843682.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2016-11-11T05:54:42.796Z,1478843682.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:43.181Z,1478843683.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:43.201Z,1478843683.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2016-11-11T05:54:43.202Z,1478843683.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:43.569Z,1478843683.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:43.603Z,1478843683.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2016-11-11T05:54:43.604Z,1478843683.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:43.976Z,1478843683.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:43.997Z,1478843683.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2016-11-11T05:54:43.998Z,1478843683.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:44.385Z,1478843684.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:44.412Z,1478843684.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2016-11-11T05:54:44.413Z,1478843684.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:44.792Z,1478843684.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:44.812Z,1478843684.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2016-11-11T05:54:44.813Z,1478843684.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:45.188Z,1478843685.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:45.203Z,1478843685.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2016-11-11T05:54:45.204Z,1478843685.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:45.600Z,1478843685.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:45.614Z,1478843685.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2016-11-11T05:54:45.615Z,1478843685.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:45.984Z,1478843685.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:46.018Z,1478843686.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2016-11-11T05:54:46.019Z,1478843686.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:46.369Z,1478843686.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:46.409Z,1478843686.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2016-11-11T05:54:46.410Z,1478843686.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:46.773Z,1478843686.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:46.793Z,1478843686.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2016-11-11T05:54:46.794Z,1478843686.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:47.177Z,1478843687.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:47.191Z,1478843687.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2016-11-11T05:54:47.192Z,1478843687.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:47.576Z,1478843687.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:47.590Z,1478843687.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2016-11-11T05:54:47.591Z,1478843687.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:47.973Z,1478843687.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:48.000Z,1478843688.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:48.376Z,1478843688.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:48.402Z,1478843688.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:48.773Z,1478843688.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:48.794Z,1478843688.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:49.173Z,1478843689.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:49.201Z,1478843689.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:49.582Z,1478843689.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:49.596Z,1478843689.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:49.989Z,1478843689.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:50.007Z,1478843690.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:50.384Z,1478843690.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:50.412Z,1478843690.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:50.789Z,1478843690.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:50.810Z,1478843690.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:51.192Z,1478843691.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:51.207Z,1478843691.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:51.573Z,1478843691.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:51.605Z,1478843691.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:51.969Z,1478843691.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:51.985Z,1478843691.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:52.374Z,1478843692.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:52.390Z,1478843692.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:52.772Z,1478843692.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:52.821Z,1478843692.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:53.169Z,1478843693.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:53.229Z,1478843693.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:53.569Z,1478843693.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:53.589Z,1478843693.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:53.972Z,1478843693.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:54.021Z,1478843694.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:54.376Z,1478843694.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:54.390Z,1478843694.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:54.773Z,1478843694.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:54.828Z,1478843694.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:55.187Z,1478843695.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:55.245Z,1478843695.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:55.584Z,1478843695.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:55.620Z,1478843695.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:55.993Z,1478843695.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:56.013Z,1478843696.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:56.392Z,1478843696.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:56.416Z,1478843696.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:56.776Z,1478843696.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:56.791Z,1478843696.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:57.178Z,1478843697.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:57.194Z,1478843697.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:57.572Z,1478843697.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:57.596Z,1478843697.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:57.978Z,1478843697.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:57.993Z,1478843697.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:58.372Z,1478843698.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:58.400Z,1478843698.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:58.781Z,1478843698.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:58.801Z,1478843698.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:59.169Z,1478843699.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:59.196Z,1478843699.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:59.569Z,1478843699.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:54:59.596Z,1478843699.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:54:59.969Z,1478843699.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:00.001Z,1478843700.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:00.392Z,1478843700.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:00.407Z,1478843700.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:00.789Z,1478843700.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:00.808Z,1478843700.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:01.189Z,1478843701.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:01.213Z,1478843701.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:01.592Z,1478843701.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:01.617Z,1478843701.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:01.972Z,1478843701.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:02.007Z,1478843702.007 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:02.007Z,1478843702.007 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2016-11-11T05:55:02.008Z,1478843702.008 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:55:02.018Z,1478843702.018 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:02.018Z,1478843702.018 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2016-11-11T05:55:02.018Z,1478843702.018 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:55:02.050Z,1478843702.050 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:55:02.050Z,1478843702.050 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:55:02.369Z,1478843702.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:02.431Z,1478843702.431 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:55:02.431Z,1478843702.431 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2016-11-11T05:55:02.436Z,1478843702.436 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:55:02.436Z,1478843702.436 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2016-11-11T05:55:02.770Z,1478843702.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:02.784Z,1478843702.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:55:02.785Z,1478843702.785 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:55:02.785Z,1478843702.785 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:55:02.790Z,1478843702.790 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:55:02.790Z,1478843702.790 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:55:02.790Z,1478843702.790 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:55:03.174Z,1478843703.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:03.194Z,1478843703.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T05:55:03.200Z,1478843703.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:03.576Z,1478843703.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:03.591Z,1478843703.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T05:55:03.592Z,1478843703.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:03.980Z,1478843703.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:03.995Z,1478843703.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T05:55:03.996Z,1478843703.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:04.372Z,1478843704.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:04.400Z,1478843704.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T05:55:04.401Z,1478843704.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:04.773Z,1478843704.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:04.794Z,1478843704.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T05:55:04.796Z,1478843704.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:05.169Z,1478843705.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:05.195Z,1478843705.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T05:55:05.196Z,1478843705.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:05.591Z,1478843705.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:05.607Z,1478843705.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T05:55:05.608Z,1478843705.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:05.987Z,1478843705.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:06.001Z,1478843706.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T05:55:06.002Z,1478843706.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:06.010Z,1478843706.010 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:06.010Z,1478843706.010 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2016-11-11T05:55:06.010Z,1478843706.010 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:55:06.025Z,1478843706.025 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:55:06.400Z,1478843706.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:06.416Z,1478843706.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T05:55:06.417Z,1478843706.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:06.460Z,1478843706.460 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:55:06.460Z,1478843706.460 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2016-11-11T05:55:06.796Z,1478843706.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:06.810Z,1478843706.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T05:55:06.812Z,1478843706.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:06.818Z,1478843706.818 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:55:06.819Z,1478843706.819 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:55:06.819Z,1478843706.819 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:55:07.177Z,1478843707.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:07.237Z,1478843707.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T05:55:07.238Z,1478843707.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:07.573Z,1478843707.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:07.633Z,1478843707.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T05:55:07.634Z,1478843707.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:07.976Z,1478843707.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:07.991Z,1478843707.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T05:55:07.992Z,1478843707.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:08.373Z,1478843708.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:08.426Z,1478843708.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T05:55:08.427Z,1478843708.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:08.777Z,1478843708.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:08.791Z,1478843708.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T05:55:08.792Z,1478843708.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:09.172Z,1478843709.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:09.221Z,1478843709.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T05:55:09.222Z,1478843709.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:09.575Z,1478843709.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:09.625Z,1478843709.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T05:55:09.626Z,1478843709.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:09.976Z,1478843709.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:09.996Z,1478843709.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T05:55:09.997Z,1478843709.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:10.376Z,1478843710.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:10.391Z,1478843710.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T05:55:10.392Z,1478843710.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:10.784Z,1478843710.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:10.804Z,1478843710.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T05:55:10.805Z,1478843710.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:11.191Z,1478843711.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:11.212Z,1478843711.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T05:55:11.213Z,1478843711.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:11.591Z,1478843711.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:11.606Z,1478843711.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T05:55:11.607Z,1478843711.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:11.987Z,1478843711.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:12.016Z,1478843712.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T05:55:12.017Z,1478843712.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:12.369Z,1478843712.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:12.408Z,1478843712.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T05:55:12.409Z,1478843712.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:12.769Z,1478843712.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:12.804Z,1478843712.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T05:55:12.805Z,1478843712.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:13.173Z,1478843713.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:13.204Z,1478843713.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T05:55:13.205Z,1478843713.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:13.569Z,1478843713.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:13.605Z,1478843713.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T05:55:13.606Z,1478843713.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:13.969Z,1478843713.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:14.004Z,1478843714.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T05:55:14.005Z,1478843714.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:14.369Z,1478843714.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:14.404Z,1478843714.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T05:55:14.405Z,1478843714.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:14.769Z,1478843714.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:14.805Z,1478843714.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T05:55:14.806Z,1478843714.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:15.169Z,1478843715.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:15.189Z,1478843715.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T05:55:15.190Z,1478843715.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:15.573Z,1478843715.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:15.592Z,1478843715.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T05:55:15.593Z,1478843715.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:15.984Z,1478843715.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:16.004Z,1478843716.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T05:55:16.005Z,1478843716.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:16.381Z,1478843716.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:16.401Z,1478843716.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T05:55:16.402Z,1478843716.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:16.788Z,1478843716.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:16.804Z,1478843716.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T05:55:16.805Z,1478843716.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:17.190Z,1478843717.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:17.208Z,1478843717.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T05:55:17.209Z,1478843717.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:17.572Z,1478843717.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:17.604Z,1478843717.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T05:55:17.605Z,1478843717.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:17.969Z,1478843717.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:18.000Z,1478843718.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T05:55:18.001Z,1478843718.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:18.370Z,1478843718.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:18.396Z,1478843718.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T05:55:18.398Z,1478843718.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:18.770Z,1478843718.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:18.789Z,1478843718.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T05:55:18.790Z,1478843718.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:19.173Z,1478843719.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:19.188Z,1478843719.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T05:55:19.189Z,1478843719.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:19.576Z,1478843719.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:19.596Z,1478843719.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T05:55:19.597Z,1478843719.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:19.970Z,1478843719.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:19.985Z,1478843719.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T05:55:19.986Z,1478843719.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:20.377Z,1478843720.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:20.391Z,1478843720.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T05:55:20.393Z,1478843720.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:20.776Z,1478843720.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:20.793Z,1478843720.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T05:55:20.794Z,1478843720.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:21.188Z,1478843721.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:21.237Z,1478843721.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T05:55:21.238Z,1478843721.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:21.587Z,1478843721.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:21.645Z,1478843721.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T05:55:21.646Z,1478843721.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:21.992Z,1478843721.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:22.009Z,1478843722.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:22.384Z,1478843722.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:22.429Z,1478843722.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:22.773Z,1478843722.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:22.788Z,1478843722.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:23.178Z,1478843723.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:23.230Z,1478843723.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:23.569Z,1478843723.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:23.621Z,1478843723.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:23.969Z,1478843723.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:24.012Z,1478843724.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:24.370Z,1478843724.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:24.385Z,1478843724.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:24.769Z,1478843724.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:24.789Z,1478843724.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:25.169Z,1478843725.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:25.189Z,1478843725.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:25.573Z,1478843725.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:25.593Z,1478843725.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:25.975Z,1478843725.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:25.991Z,1478843725.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:26.383Z,1478843726.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:26.405Z,1478843726.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:26.784Z,1478843726.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:26.799Z,1478843726.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:27.184Z,1478843727.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:27.199Z,1478843727.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:27.586Z,1478843727.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:27.605Z,1478843727.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:27.982Z,1478843727.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:28.009Z,1478843728.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:28.369Z,1478843728.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:28.402Z,1478843728.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:28.769Z,1478843728.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:28.805Z,1478843728.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:29.170Z,1478843729.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:29.205Z,1478843729.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:29.569Z,1478843729.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:29.609Z,1478843729.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:29.969Z,1478843729.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:29.989Z,1478843729.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:30.374Z,1478843730.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:30.389Z,1478843730.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:30.770Z,1478843730.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:30.794Z,1478843730.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:31.176Z,1478843731.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:31.197Z,1478843731.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:31.596Z,1478843731.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:31.627Z,1478843731.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:31.986Z,1478843731.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:32.002Z,1478843732.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:32.390Z,1478843732.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:32.409Z,1478843732.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:32.795Z,1478843732.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:32.811Z,1478843732.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:33.174Z,1478843733.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:33.205Z,1478843733.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:33.573Z,1478843733.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:33.598Z,1478843733.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:33.969Z,1478843733.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:34.005Z,1478843734.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:34.369Z,1478843734.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:34.401Z,1478843734.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:34.769Z,1478843734.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:34.805Z,1478843734.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:35.170Z,1478843735.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:35.209Z,1478843735.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:35.573Z,1478843735.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:35.589Z,1478843735.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:35.973Z,1478843735.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:36.049Z,1478843736.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:39.256Z,1478843739.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:39.281Z,1478843739.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:39.396Z,1478843739.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:39.430Z,1478843739.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:39.748Z,1478843739.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:39.786Z,1478843739.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:40.148Z,1478843740.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:40.180Z,1478843740.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:40.533Z,1478843740.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:40.581Z,1478843740.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:40.937Z,1478843740.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:40.983Z,1478843740.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:41.337Z,1478843741.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:41.357Z,1478843741.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:41.733Z,1478843741.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:41.755Z,1478843741.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:42.136Z,1478843742.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:42.151Z,1478843742.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:42.540Z,1478843742.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:42.561Z,1478843742.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:42.929Z,1478843742.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:42.961Z,1478843742.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:43.329Z,1478843743.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:43.361Z,1478843743.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:43.730Z,1478843743.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:43.761Z,1478843743.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:44.152Z,1478843744.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:44.168Z,1478843744.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:44.540Z,1478843744.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:44.569Z,1478843744.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:44.952Z,1478843744.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:44.976Z,1478843744.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:45.340Z,1478843745.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:45.375Z,1478843745.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:45.729Z,1478843745.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:45.772Z,1478843745.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:46.130Z,1478843746.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:46.165Z,1478843746.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:46.530Z,1478843746.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:46.554Z,1478843746.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:46.937Z,1478843746.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:46.957Z,1478843746.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:47.012Z,1478843747.012 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T05:55:47.341Z,1478843747.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:47.356Z,1478843747.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:47.737Z,1478843747.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:47.752Z,1478843747.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:48.136Z,1478843748.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:48.157Z,1478843748.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:48.538Z,1478843748.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:48.561Z,1478843748.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:48.929Z,1478843748.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:48.956Z,1478843748.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:49.347Z,1478843749.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:49.362Z,1478843749.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:49.752Z,1478843749.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:49.780Z,1478843749.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:50.148Z,1478843750.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:50.170Z,1478843750.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:50.540Z,1478843750.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:50.567Z,1478843750.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:50.929Z,1478843750.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:50.969Z,1478843750.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:51.333Z,1478843751.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:51.353Z,1478843751.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:51.738Z,1478843751.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:51.757Z,1478843751.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:52.141Z,1478843752.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:52.161Z,1478843752.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:52.532Z,1478843752.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:52.564Z,1478843752.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:52.932Z,1478843752.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:52.955Z,1478843752.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:53.337Z,1478843753.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:53.419Z,1478843753.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:53.729Z,1478843753.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:53.761Z,1478843753.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:54.129Z,1478843754.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:54.173Z,1478843754.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:54.549Z,1478843754.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:54.577Z,1478843754.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:54.940Z,1478843754.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:54.989Z,1478843754.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:55.348Z,1478843755.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:55.401Z,1478843755.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:55.752Z,1478843755.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:55.777Z,1478843755.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:56.138Z,1478843756.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:56.154Z,1478843756.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:56.538Z,1478843756.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:56.553Z,1478843756.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:56.941Z,1478843756.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:57.113Z,1478843757.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:57.340Z,1478843757.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:57.356Z,1478843757.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:57.736Z,1478843757.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:57.752Z,1478843757.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:58.137Z,1478843758.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:58.154Z,1478843758.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:58.529Z,1478843758.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:58.564Z,1478843758.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:58.929Z,1478843758.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:58.955Z,1478843758.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:59.329Z,1478843759.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:59.361Z,1478843759.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:55:59.751Z,1478843759.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:55:59.767Z,1478843759.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:00.140Z,1478843760.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:00.170Z,1478843760.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:00.529Z,1478843760.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:00.564Z,1478843760.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:00.933Z,1478843760.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:00.957Z,1478843760.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:01.336Z,1478843761.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:01.351Z,1478843761.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:01.738Z,1478843761.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:01.752Z,1478843761.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:02.151Z,1478843762.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:02.166Z,1478843762.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:02.550Z,1478843762.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:02.573Z,1478843762.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:02.930Z,1478843762.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:02.956Z,1478843762.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:03.333Z,1478843763.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:03.359Z,1478843763.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:03.737Z,1478843763.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:03.773Z,1478843763.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:04.134Z,1478843764.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:04.174Z,1478843764.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:04.529Z,1478843764.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:04.565Z,1478843764.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:04.929Z,1478843764.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:04.965Z,1478843764.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:05.329Z,1478843765.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:05.365Z,1478843765.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:05.733Z,1478843765.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:05.757Z,1478843765.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:06.136Z,1478843766.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:06.151Z,1478843766.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:06.533Z,1478843766.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:06.561Z,1478843766.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:06.938Z,1478843766.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:06.959Z,1478843766.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:07.329Z,1478843767.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:07.410Z,1478843767.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:07.730Z,1478843767.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:07.757Z,1478843767.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:08.132Z,1478843768.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:08.160Z,1478843768.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:08.537Z,1478843768.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:08.594Z,1478843768.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:08.938Z,1478843768.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:08.953Z,1478843768.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:09.329Z,1478843769.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:09.396Z,1478843769.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:09.729Z,1478843769.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:09.781Z,1478843769.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:10.129Z,1478843770.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:10.172Z,1478843770.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:10.529Z,1478843770.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:10.562Z,1478843770.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:10.951Z,1478843770.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:10.973Z,1478843770.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:11.356Z,1478843771.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:11.375Z,1478843771.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:11.729Z,1478843771.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:11.765Z,1478843771.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:12.129Z,1478843772.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:12.165Z,1478843772.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:12.530Z,1478843772.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:12.557Z,1478843772.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:12.929Z,1478843772.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:12.970Z,1478843772.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:13.333Z,1478843773.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:13.353Z,1478843773.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:13.727Z,1478843773.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:13.764Z,1478843773.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:14.133Z,1478843774.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:14.148Z,1478843774.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:14.536Z,1478843774.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:14.551Z,1478843774.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:14.944Z,1478843774.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:14.959Z,1478843774.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:15.340Z,1478843775.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:15.367Z,1478843775.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:15.736Z,1478843775.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:15.757Z,1478843775.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:16.137Z,1478843776.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:16.152Z,1478843776.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:16.541Z,1478843776.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:16.558Z,1478843776.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:16.938Z,1478843776.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:16.959Z,1478843776.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:17.329Z,1478843777.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:17.361Z,1478843777.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:17.734Z,1478843777.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:17.763Z,1478843777.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:18.129Z,1478843778.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:18.165Z,1478843778.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:18.529Z,1478843778.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:18.566Z,1478843778.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:18.929Z,1478843778.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:18.968Z,1478843778.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:19.362Z,1478843779.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:19.377Z,1478843779.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:19.740Z,1478843779.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:19.788Z,1478843779.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:20.156Z,1478843780.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:20.172Z,1478843780.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:20.540Z,1478843780.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:20.577Z,1478843780.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:20.929Z,1478843780.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:20.976Z,1478843780.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:21.329Z,1478843781.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:21.349Z,1478843781.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:21.734Z,1478843781.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:21.805Z,1478843781.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:22.129Z,1478843782.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:22.156Z,1478843782.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:22.537Z,1478843782.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:22.589Z,1478843782.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:22.933Z,1478843782.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:22.953Z,1478843782.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:23.333Z,1478843783.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:23.386Z,1478843783.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:23.737Z,1478843783.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:23.797Z,1478843783.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:24.133Z,1478843784.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:24.156Z,1478843784.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:24.544Z,1478843784.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:24.565Z,1478843784.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:24.945Z,1478843784.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:24.967Z,1478843784.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:25.348Z,1478843785.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:25.367Z,1478843785.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:25.752Z,1478843785.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:25.773Z,1478843785.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:26.133Z,1478843786.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:26.175Z,1478843786.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:26.529Z,1478843786.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:26.562Z,1478843786.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:26.929Z,1478843786.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:26.964Z,1478843786.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:27.329Z,1478843787.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:27.371Z,1478843787.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:27.729Z,1478843787.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:27.749Z,1478843787.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:28.133Z,1478843788.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:28.147Z,1478843788.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:28.537Z,1478843788.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:28.576Z,1478843788.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:28.937Z,1478843788.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:28.956Z,1478843788.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:29.336Z,1478843789.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:29.362Z,1478843789.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:29.744Z,1478843789.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:29.762Z,1478843789.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:30.146Z,1478843790.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:30.164Z,1478843790.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:30.540Z,1478843790.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:30.556Z,1478843790.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:30.929Z,1478843790.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:30.973Z,1478843790.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:31.329Z,1478843791.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:31.356Z,1478843791.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:31.729Z,1478843791.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:31.769Z,1478843791.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:32.139Z,1478843792.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:32.166Z,1478843792.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:32.560Z,1478843792.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:32.602Z,1478843792.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:32.957Z,1478843792.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:32.965Z,1478843792.965 [PNI_TCM](ERROR): CRC does not match. Expected:0x47238 got:0x37362
2016-11-11T05:56:33.001Z,1478843793.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:33.345Z,1478843793.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:33.383Z,1478843793.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:33.746Z,1478843793.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:33.774Z,1478843793.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:34.134Z,1478843794.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:34.174Z,1478843794.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:34.530Z,1478843794.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:34.562Z,1478843794.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:34.933Z,1478843794.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:34.951Z,1478843794.951 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T05:56:34.951Z,1478843794.951 [BPC1] Data Fault, FailCount= 1
2016-11-11T05:56:34.951Z,1478843794.951 [BPC1](ERROR): Data Fault
2016-11-11T05:56:34.968Z,1478843794.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:35.001Z,1478843795.001 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:56:35.332Z,1478843795.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:35.365Z,1478843795.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:35.730Z,1478843795.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:35.758Z,1478843795.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:36.135Z,1478843796.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:36.166Z,1478843796.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:36.186Z,1478843796.186 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:56:36.186Z,1478843796.186 [BPC1] No Fault, FailCount= 1
2016-11-11T05:56:39.515Z,1478843799.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:39.586Z,1478843799.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:39.700Z,1478843799.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:39.736Z,1478843799.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:40.061Z,1478843800.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:40.109Z,1478843800.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:40.465Z,1478843800.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:40.481Z,1478843800.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:40.860Z,1478843800.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:40.893Z,1478843800.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:41.273Z,1478843801.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:41.293Z,1478843801.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:41.676Z,1478843801.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:41.690Z,1478843801.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:42.057Z,1478843802.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:42.089Z,1478843802.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:42.457Z,1478843802.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:42.491Z,1478843802.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:42.857Z,1478843802.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:42.889Z,1478843802.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:43.257Z,1478843803.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:43.289Z,1478843803.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:43.657Z,1478843803.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:43.691Z,1478843803.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:44.057Z,1478843804.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:44.090Z,1478843804.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:44.457Z,1478843804.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:44.493Z,1478843804.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:44.858Z,1478843804.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:44.886Z,1478843804.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:45.265Z,1478843805.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:45.280Z,1478843805.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:45.661Z,1478843805.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:45.680Z,1478843805.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:46.064Z,1478843806.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:46.085Z,1478843806.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:46.466Z,1478843806.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:46.481Z,1478843806.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:46.860Z,1478843806.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:46.889Z,1478843806.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:47.264Z,1478843807.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:47.285Z,1478843807.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:47.658Z,1478843807.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:47.693Z,1478843807.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:48.058Z,1478843808.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:48.092Z,1478843808.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:48.457Z,1478843808.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:48.493Z,1478843808.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:48.857Z,1478843808.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:48.890Z,1478843808.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:49.262Z,1478843809.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:49.288Z,1478843809.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:49.665Z,1478843809.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:49.706Z,1478843809.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:50.072Z,1478843810.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:50.105Z,1478843810.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:50.476Z,1478843810.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:50.505Z,1478843810.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:50.865Z,1478843810.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:50.906Z,1478843810.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:51.261Z,1478843811.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:51.281Z,1478843811.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:51.662Z,1478843811.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:51.693Z,1478843811.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:52.061Z,1478843812.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:52.117Z,1478843812.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:52.465Z,1478843812.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:52.502Z,1478843812.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:52.857Z,1478843812.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:52.883Z,1478843812.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:53.261Z,1478843813.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:53.310Z,1478843813.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:53.657Z,1478843813.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:53.689Z,1478843813.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:54.084Z,1478843814.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:54.136Z,1478843814.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:54.479Z,1478843814.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:54.531Z,1478843814.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:54.857Z,1478843814.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:54.890Z,1478843814.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:55.261Z,1478843815.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:55.287Z,1478843815.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:55.657Z,1478843815.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:55.689Z,1478843815.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:56.057Z,1478843816.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:56.094Z,1478843816.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:56.461Z,1478843816.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:56.487Z,1478843816.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:56.857Z,1478843816.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:56.893Z,1478843816.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:57.257Z,1478843817.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:57.272Z,1478843817.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:57.665Z,1478843817.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:57.704Z,1478843817.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:58.064Z,1478843818.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:58.091Z,1478843818.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:58.472Z,1478843818.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:58.495Z,1478843818.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:58.870Z,1478843818.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:58.885Z,1478843818.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:59.276Z,1478843819.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:59.293Z,1478843819.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:56:59.674Z,1478843819.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:56:59.689Z,1478843819.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:00.069Z,1478843820.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:00.084Z,1478843820.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:00.465Z,1478843820.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:00.487Z,1478843820.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:00.857Z,1478843820.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:00.890Z,1478843820.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:01.261Z,1478843821.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:01.293Z,1478843821.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:01.661Z,1478843821.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:01.687Z,1478843821.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:02.058Z,1478843822.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:02.085Z,1478843822.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:02.461Z,1478843822.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:02.489Z,1478843822.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:02.865Z,1478843822.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:02.901Z,1478843822.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:03.271Z,1478843823.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:03.310Z,1478843823.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:03.668Z,1478843823.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:03.711Z,1478843823.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:04.072Z,1478843824.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:04.098Z,1478843824.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:04.472Z,1478843824.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:04.502Z,1478843824.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:04.862Z,1478843824.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:04.902Z,1478843824.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:05.262Z,1478843825.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:05.281Z,1478843825.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:05.666Z,1478843825.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:05.682Z,1478843825.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:06.061Z,1478843826.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:06.081Z,1478843826.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:06.461Z,1478843826.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:06.481Z,1478843826.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:06.865Z,1478843826.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:06.929Z,1478843826.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:07.257Z,1478843827.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:07.291Z,1478843827.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:07.657Z,1478843827.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:07.691Z,1478843827.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:08.079Z,1478843828.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:08.105Z,1478843828.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:08.472Z,1478843828.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:08.507Z,1478843828.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:08.892Z,1478843828.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:08.908Z,1478843828.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:09.272Z,1478843829.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:09.299Z,1478843829.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:09.658Z,1478843829.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:09.670Z,1478843829.671 [BPC1](ERROR): Failed to receive battery data
2016-11-11T05:57:09.671Z,1478843829.671 [BPC1] Communications Fault, FailCount= 1
2016-11-11T05:57:09.671Z,1478843829.671 [BPC1](ERROR): Communications Fault
2016-11-11T05:57:09.695Z,1478843829.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:09.734Z,1478843829.734 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T05:57:10.072Z,1478843830.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:10.092Z,1478843830.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:10.461Z,1478843830.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:10.493Z,1478843830.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:10.857Z,1478843830.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:10.889Z,1478843830.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:10.922Z,1478843830.922 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:57:10.922Z,1478843830.922 [BPC1] No Fault, FailCount= 1
2016-11-11T05:57:11.261Z,1478843831.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:11.345Z,1478843831.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:11.658Z,1478843831.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:11.706Z,1478843831.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:12.057Z,1478843832.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:12.093Z,1478843832.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:12.457Z,1478843832.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:12.493Z,1478843832.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:12.857Z,1478843832.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:12.897Z,1478843832.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:13.283Z,1478843833.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:13.306Z,1478843833.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:13.677Z,1478843833.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:13.700Z,1478843833.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:14.071Z,1478843834.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:14.108Z,1478843834.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:14.468Z,1478843834.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:14.500Z,1478843834.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:14.865Z,1478843834.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:14.899Z,1478843834.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:15.261Z,1478843835.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:15.279Z,1478843835.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:15.664Z,1478843835.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:15.679Z,1478843835.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:16.065Z,1478843836.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:16.086Z,1478843836.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:16.465Z,1478843836.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:16.484Z,1478843836.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:16.860Z,1478843836.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:16.897Z,1478843836.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:17.261Z,1478843837.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:17.304Z,1478843837.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:17.657Z,1478843837.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:17.685Z,1478843837.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:18.057Z,1478843838.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:18.095Z,1478843838.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:18.477Z,1478843838.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:18.510Z,1478843838.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:18.881Z,1478843838.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:18.909Z,1478843838.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:19.272Z,1478843839.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:19.309Z,1478843839.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:19.674Z,1478843839.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:19.698Z,1478843839.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:20.080Z,1478843840.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:20.105Z,1478843840.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:20.465Z,1478843840.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:20.509Z,1478843840.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:20.865Z,1478843840.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:20.903Z,1478843840.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:21.261Z,1478843841.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:21.285Z,1478843841.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:21.662Z,1478843841.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:21.679Z,1478843841.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:22.065Z,1478843842.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:22.132Z,1478843842.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:22.465Z,1478843842.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:22.484Z,1478843842.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:22.861Z,1478843842.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:22.892Z,1478843842.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:23.262Z,1478843843.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:23.297Z,1478843843.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:23.680Z,1478843843.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:23.716Z,1478843843.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:24.074Z,1478843844.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:24.083Z,1478843844.083 [PNI_TCM](ERROR): CRC does not match. Expected:0x31109 got:0x21830
2016-11-11T05:57:24.137Z,1478843844.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:24.478Z,1478843844.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:24.493Z,1478843844.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:24.877Z,1478843844.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:24.927Z,1478843844.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:25.261Z,1478843845.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:25.325Z,1478843845.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:25.665Z,1478843845.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:25.691Z,1478843845.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:26.057Z,1478843846.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:26.097Z,1478843846.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:26.459Z,1478843846.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:26.485Z,1478843846.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:26.873Z,1478843846.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:26.905Z,1478843846.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:27.257Z,1478843847.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:27.277Z,1478843847.277 [PNI_TCM](ERROR): CRC does not match. Expected:0x3514 got:0x49013
2016-11-11T05:57:27.298Z,1478843847.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:27.658Z,1478843847.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:27.688Z,1478843847.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:28.063Z,1478843848.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:28.099Z,1478843848.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:28.457Z,1478843848.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:28.494Z,1478843848.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:28.857Z,1478843848.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:28.897Z,1478843848.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:29.259Z,1478843849.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:29.292Z,1478843849.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:29.660Z,1478843849.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:29.705Z,1478843849.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:30.072Z,1478843850.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:30.101Z,1478843850.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:30.474Z,1478843850.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:30.499Z,1478843850.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:30.860Z,1478843850.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:30.905Z,1478843850.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:31.260Z,1478843851.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:31.275Z,1478843851.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:31.665Z,1478843851.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:31.702Z,1478843851.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:32.071Z,1478843852.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:32.077Z,1478843852.077 [PNI_TCM](ERROR): CRC does not match. Expected:0x8407 got:0x6591
2016-11-11T05:57:32.104Z,1478843852.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:32.463Z,1478843852.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:32.478Z,1478843852.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:32.864Z,1478843852.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:32.887Z,1478843852.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:33.261Z,1478843853.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:33.309Z,1478843853.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:33.663Z,1478843853.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:33.671Z,1478843853.671 [PNI_TCM](ERROR): CRC does not match. Expected:0x48079 got:0x49709
2016-11-11T05:57:33.712Z,1478843853.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:34.072Z,1478843854.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:34.099Z,1478843854.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:34.475Z,1478843854.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:34.497Z,1478843854.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:34.877Z,1478843854.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:34.893Z,1478843854.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:35.261Z,1478843855.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:35.297Z,1478843855.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:35.668Z,1478843855.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:35.688Z,1478843855.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:36.068Z,1478843856.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:36.091Z,1478843856.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:36.472Z,1478843856.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:36.534Z,1478843856.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:39.812Z,1478843859.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:39.858Z,1478843859.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:39.985Z,1478843859.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:40.014Z,1478843860.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:40.355Z,1478843860.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:40.371Z,1478843860.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:40.752Z,1478843860.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:40.781Z,1478843860.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:41.157Z,1478843861.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:41.212Z,1478843861.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:41.560Z,1478843861.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:41.575Z,1478843861.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:41.958Z,1478843861.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:42.005Z,1478843862.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:42.352Z,1478843862.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:42.403Z,1478843862.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:42.756Z,1478843862.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:42.772Z,1478843862.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:43.161Z,1478843863.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:43.176Z,1478843863.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:43.549Z,1478843863.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:43.581Z,1478843863.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:43.964Z,1478843863.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:43.980Z,1478843863.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:44.349Z,1478843864.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:44.384Z,1478843864.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:44.749Z,1478843864.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:44.775Z,1478843864.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:45.149Z,1478843865.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:45.181Z,1478843865.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:45.549Z,1478843865.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:45.585Z,1478843865.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:45.949Z,1478843865.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:45.977Z,1478843865.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:46.349Z,1478843866.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:46.385Z,1478843866.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:46.749Z,1478843866.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:46.785Z,1478843866.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:47.149Z,1478843867.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:47.185Z,1478843867.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:47.573Z,1478843867.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:47.593Z,1478843867.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:47.973Z,1478843867.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:47.993Z,1478843867.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:48.349Z,1478843868.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:48.365Z,1478843868.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:48.749Z,1478843868.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:48.769Z,1478843868.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:49.153Z,1478843869.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:49.168Z,1478843869.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:49.557Z,1478843869.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:49.577Z,1478843869.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:49.956Z,1478843869.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:49.971Z,1478843869.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:50.356Z,1478843870.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:50.371Z,1478843870.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:50.759Z,1478843870.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:50.775Z,1478843870.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:51.157Z,1478843871.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:51.178Z,1478843871.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:51.557Z,1478843871.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:51.591Z,1478843871.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:51.952Z,1478843871.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:51.984Z,1478843871.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:52.360Z,1478843872.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:52.385Z,1478843872.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:52.749Z,1478843872.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:52.802Z,1478843872.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:53.149Z,1478843873.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:53.185Z,1478843873.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:53.548Z,1478843873.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:53.581Z,1478843873.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:53.954Z,1478843873.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:53.987Z,1478843873.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:54.349Z,1478843874.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:54.369Z,1478843874.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:54.753Z,1478843874.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:54.773Z,1478843874.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:55.157Z,1478843875.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:55.172Z,1478843875.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:55.556Z,1478843875.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:55.572Z,1478843875.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:55.972Z,1478843875.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:55.988Z,1478843875.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:56.370Z,1478843876.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:56.389Z,1478843876.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:56.750Z,1478843876.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:56.781Z,1478843876.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:57.149Z,1478843877.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:57.174Z,1478843877.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:57.549Z,1478843877.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:57.558Z,1478843877.558 [BPC1](ERROR): Failed to receive battery data
2016-11-11T05:57:57.558Z,1478843877.558 [BPC1] Communications Fault, FailCount= 1
2016-11-11T05:57:57.558Z,1478843877.558 [BPC1](ERROR): Communications Fault
2016-11-11T05:57:57.609Z,1478843877.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:57.659Z,1478843877.659 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T05:57:57.952Z,1478843877.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:57.981Z,1478843877.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:58.356Z,1478843878.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:58.372Z,1478843878.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:58.757Z,1478843878.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:58.772Z,1478843878.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:58.812Z,1478843878.812 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:57:58.812Z,1478843878.812 [BPC1] No Fault, FailCount= 1
2016-11-11T05:57:59.152Z,1478843879.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:59.233Z,1478843879.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:59.552Z,1478843879.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:59.603Z,1478843879.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:57:59.975Z,1478843879.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:57:59.989Z,1478843879.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:00.368Z,1478843880.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:00.396Z,1478843880.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:00.764Z,1478843880.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:00.790Z,1478843880.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:01.149Z,1478843881.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:01.186Z,1478843881.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:01.549Z,1478843881.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:01.585Z,1478843881.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:01.949Z,1478843881.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:01.985Z,1478843881.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:02.349Z,1478843882.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:02.385Z,1478843882.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:02.749Z,1478843882.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:02.785Z,1478843882.786 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:02.786Z,1478843882.786 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2016-11-11T05:58:02.786Z,1478843882.786 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T05:58:02.792Z,1478843882.792 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:02.793Z,1478843882.793 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2016-11-11T05:58:02.793Z,1478843882.793 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T05:58:02.824Z,1478843882.824 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T05:58:02.824Z,1478843882.824 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T05:58:03.157Z,1478843883.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:03.211Z,1478843883.211 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T05:58:03.211Z,1478843883.211 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2016-11-11T05:58:03.212Z,1478843883.212 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T05:58:03.212Z,1478843883.212 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2016-11-11T05:58:03.549Z,1478843883.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:03.592Z,1478843883.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T05:58:03.592Z,1478843883.592 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:58:03.592Z,1478843883.592 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:58:03.597Z,1478843883.597 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T05:58:03.598Z,1478843883.598 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:58:03.598Z,1478843883.598 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:58:03.949Z,1478843883.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:03.969Z,1478843883.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T05:58:03.970Z,1478843883.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:04.357Z,1478843884.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:04.393Z,1478843884.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T05:58:04.394Z,1478843884.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:04.757Z,1478843884.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:04.771Z,1478843884.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T05:58:04.772Z,1478843884.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:05.155Z,1478843885.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:05.170Z,1478843885.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T05:58:05.171Z,1478843885.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:05.557Z,1478843885.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:05.577Z,1478843885.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T05:58:05.578Z,1478843885.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:05.967Z,1478843885.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:05.988Z,1478843885.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T05:58:05.989Z,1478843885.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:06.357Z,1478843886.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:06.372Z,1478843886.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T05:58:06.373Z,1478843886.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:06.757Z,1478843886.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:06.780Z,1478843886.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T05:58:06.781Z,1478843886.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:07.149Z,1478843887.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:07.184Z,1478843887.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T05:58:07.185Z,1478843887.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:07.192Z,1478843887.192 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:07.192Z,1478843887.192 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 4
2016-11-11T05:58:07.192Z,1478843887.192 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T05:58:07.222Z,1478843887.222 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T05:58:07.572Z,1478843887.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:07.613Z,1478843887.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T05:58:07.614Z,1478843887.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:07.666Z,1478843887.666 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T05:58:07.666Z,1478843887.666 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 4
2016-11-11T05:58:07.950Z,1478843887.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:07.970Z,1478843887.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T05:58:07.970Z,1478843887.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:08.001Z,1478843888.001 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T05:58:08.001Z,1478843888.001 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T05:58:08.002Z,1478843888.002 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T05:58:08.351Z,1478843888.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:08.393Z,1478843888.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T05:58:08.394Z,1478843888.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:08.751Z,1478843888.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:08.794Z,1478843888.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T05:58:08.804Z,1478843888.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:09.170Z,1478843889.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:09.216Z,1478843889.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T05:58:09.217Z,1478843889.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:09.590Z,1478843889.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:09.621Z,1478843889.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T05:58:09.622Z,1478843889.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:09.957Z,1478843889.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:10.001Z,1478843890.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T05:58:10.002Z,1478843890.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:10.360Z,1478843890.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:10.433Z,1478843890.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T05:58:10.434Z,1478843890.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:10.751Z,1478843890.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:10.830Z,1478843890.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T05:58:10.831Z,1478843890.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:11.151Z,1478843891.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:11.195Z,1478843891.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T05:58:11.200Z,1478843891.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:11.552Z,1478843891.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:11.595Z,1478843891.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T05:58:11.596Z,1478843891.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:11.956Z,1478843891.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:11.995Z,1478843891.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T05:58:11.996Z,1478843891.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:12.356Z,1478843892.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:12.401Z,1478843892.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T05:58:12.402Z,1478843892.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:12.750Z,1478843892.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:12.798Z,1478843892.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T05:58:12.816Z,1478843892.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:13.156Z,1478843893.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:13.217Z,1478843893.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T05:58:13.218Z,1478843893.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:13.570Z,1478843893.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:13.617Z,1478843893.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T05:58:13.618Z,1478843893.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:13.962Z,1478843893.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:14.001Z,1478843894.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T05:58:14.002Z,1478843894.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:14.364Z,1478843894.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:14.429Z,1478843894.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T05:58:14.430Z,1478843894.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:14.751Z,1478843894.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:14.760Z,1478843894.760 [BPC1](ERROR): Failed to receive battery data
2016-11-11T05:58:14.760Z,1478843894.760 [BPC1] Communications Fault, FailCount= 2
2016-11-11T05:58:14.760Z,1478843894.760 [BPC1](ERROR): Communications Fault
2016-11-11T05:58:14.800Z,1478843894.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T05:58:14.802Z,1478843894.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:14.876Z,1478843894.876 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T05:58:15.156Z,1478843895.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:15.209Z,1478843895.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T05:58:15.210Z,1478843895.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:15.560Z,1478843895.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:15.589Z,1478843895.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T05:58:15.591Z,1478843895.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:15.956Z,1478843895.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:16.004Z,1478843896.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T05:58:16.005Z,1478843896.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:16.049Z,1478843896.049 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:58:16.049Z,1478843896.049 [BPC1] No Fault, FailCount= 2
2016-11-11T05:58:16.357Z,1478843896.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:16.470Z,1478843896.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2016-11-11T05:58:16.471Z,1478843896.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:16.777Z,1478843896.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:16.799Z,1478843896.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T05:58:16.800Z,1478843896.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:17.149Z,1478843897.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:17.201Z,1478843897.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T05:58:17.202Z,1478843897.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:17.549Z,1478843897.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:17.606Z,1478843897.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T05:58:17.612Z,1478843897.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:17.960Z,1478843897.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:17.992Z,1478843897.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T05:58:17.993Z,1478843897.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:18.361Z,1478843898.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:18.395Z,1478843898.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T05:58:18.396Z,1478843898.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:18.761Z,1478843898.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:18.819Z,1478843898.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T05:58:18.820Z,1478843898.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:19.191Z,1478843899.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:19.206Z,1478843899.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T05:58:19.207Z,1478843899.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:19.564Z,1478843899.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:19.604Z,1478843899.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T05:58:19.605Z,1478843899.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:19.956Z,1478843899.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:19.976Z,1478843899.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T05:58:19.977Z,1478843899.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:20.373Z,1478843900.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:20.406Z,1478843900.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T05:58:20.407Z,1478843900.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:20.752Z,1478843900.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:20.778Z,1478843900.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T05:58:20.779Z,1478843900.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:21.157Z,1478843901.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:21.220Z,1478843901.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T05:58:21.221Z,1478843901.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:21.552Z,1478843901.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:21.605Z,1478843901.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T05:58:21.607Z,1478843901.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:21.963Z,1478843901.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:21.998Z,1478843901.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T05:58:21.999Z,1478843901.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:22.355Z,1478843902.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:22.410Z,1478843902.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T05:58:22.411Z,1478843902.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:22.756Z,1478843902.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:22.802Z,1478843902.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:23.174Z,1478843903.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:23.220Z,1478843903.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:23.561Z,1478843903.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:23.599Z,1478843903.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:23.952Z,1478843903.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:24.005Z,1478843904.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:24.352Z,1478843904.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:24.414Z,1478843904.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:24.771Z,1478843904.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:24.801Z,1478843904.801 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T05:58:24.851Z,1478843904.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:25.165Z,1478843905.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:25.215Z,1478843905.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:25.560Z,1478843905.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:25.638Z,1478843905.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:25.960Z,1478843905.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:25.992Z,1478843905.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:26.379Z,1478843906.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:26.409Z,1478843906.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:26.752Z,1478843906.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:26.792Z,1478843906.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:27.161Z,1478843907.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:27.178Z,1478843907.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:27.565Z,1478843907.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:27.665Z,1478843907.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:27.962Z,1478843907.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:28.034Z,1478843908.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:28.351Z,1478843908.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:28.417Z,1478843908.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:28.754Z,1478843908.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:28.761Z,1478843908.761 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T05:58:28.801Z,1478843908.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:29.156Z,1478843909.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:29.209Z,1478843909.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:29.551Z,1478843909.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:29.606Z,1478843909.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:29.949Z,1478843909.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:29.987Z,1478843909.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:30.352Z,1478843910.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:30.378Z,1478843910.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:30.757Z,1478843910.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:30.801Z,1478843910.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:31.150Z,1478843911.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:31.188Z,1478843911.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:31.549Z,1478843911.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:31.589Z,1478843911.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:31.952Z,1478843911.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:31.991Z,1478843911.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:32.350Z,1478843912.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:32.389Z,1478843912.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:32.749Z,1478843912.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:32.791Z,1478843912.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:33.149Z,1478843913.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:33.168Z,1478843913.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:33.555Z,1478843913.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:33.570Z,1478843913.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:33.957Z,1478843913.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:33.998Z,1478843913.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:34.355Z,1478843914.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:34.377Z,1478843914.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:34.756Z,1478843914.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:34.779Z,1478843914.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:35.159Z,1478843915.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:35.175Z,1478843915.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:35.556Z,1478843915.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:35.589Z,1478843915.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:35.622Z,1478843915.622 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T05:53:35.3Z
2016-11-11T05:58:35.622Z,1478843915.622 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T05:58:35.622Z,1478843915.622 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T05:58:35.950Z,1478843915.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:35.980Z,1478843915.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:48.211Z,1478843928.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:48.221Z,1478843928.221 [BPC1](ERROR): Failed to receive battery data
2016-11-11T05:58:48.221Z,1478843928.221 [BPC1] Communications Fault, FailCount= 1
2016-11-11T05:58:48.221Z,1478843928.221 [BPC1](ERROR): Communications Fault
2016-11-11T05:58:48.240Z,1478843928.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:48.289Z,1478843928.289 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T05:58:48.334Z,1478843928.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:48.377Z,1478843928.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:51.693Z,1478843931.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:51.700Z,1478843931.700 [PNI_TCM](ERROR): CRC does not match. Expected:0x2491 got:0x58162
2016-11-11T05:58:51.700Z,1478843931.700 [PNI_TCM](ERROR): CRC does not match. Expected:0x64441 got:0x57764
2016-11-11T05:58:51.701Z,1478843931.701 [PNI_TCM](ERROR): CRC does not match. Expected:0x47711 got:0x369
2016-11-11T05:58:51.701Z,1478843931.701 [PNI_TCM](ERROR): CRC does not match. Expected:0x42234 got:0x55309
2016-11-11T05:58:51.702Z,1478843931.702 [PNI_TCM](ERROR): CRC does not match. Expected:0x17611 got:0x55938
2016-11-11T05:58:51.702Z,1478843931.702 [PNI_TCM](ERROR): CRC does not match. Expected:0x54691 got:0x65317
2016-11-11T05:58:51.702Z,1478843931.702 [PNI_TCM](ERROR): CRC does not match. Expected:0x614 got:0x5070
2016-11-11T05:58:51.703Z,1478843931.703 [PNI_TCM](ERROR): CRC does not match. Expected:0x9736 got:0x1755
2016-11-11T05:58:51.767Z,1478843931.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:51.832Z,1478843931.832 [DataOverHttps](INFO): Sending 231 bytes from file Logs/20161111T044527/Courier0028.lzma
2016-11-11T05:58:51.857Z,1478843931.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:51.885Z,1478843931.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:51.925Z,1478843931.925 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:58:51.925Z,1478843931.925 [BPC1] No Fault, FailCount= 1
2016-11-11T05:58:52.260Z,1478843932.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:52.322Z,1478843932.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:52.632Z,1478843932.632 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0028.lzma.bak
2016-11-11T05:58:52.633Z,1478843932.633 [DataOverHttps](INFO): SBD MOMSN=4555069
2016-11-11T05:58:52.667Z,1478843932.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:52.719Z,1478843932.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:53.899Z,1478843933.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:53.923Z,1478843933.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:54.020Z,1478843934.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:54.044Z,1478843934.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:57.335Z,1478843937.335 [NAL9602](INFO): SBD MO Status=0, MOMSN=338, MT Status=0, MTMSN=0
2016-11-11T05:58:57.335Z,1478843937.335 [NAL9602](INFO): No messages in MT queue
2016-11-11T05:58:57.335Z,1478843937.335 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2016-11-11T05:58:57.371Z,1478843937.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:57.394Z,1478843937.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:57.501Z,1478843937.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:57.524Z,1478843937.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:57.866Z,1478843937.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:57.905Z,1478843937.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:58.261Z,1478843938.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:58.298Z,1478843938.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:58.661Z,1478843938.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:58.694Z,1478843938.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:58:59.070Z,1478843939.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:58:59.105Z,1478843939.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:02.417Z,1478843942.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:02.448Z,1478843942.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:02.495Z,1478843942.495 [DataOverHttps](INFO): Sending 412 bytes from file Logs/20161111T044527/Express0029.lzma
2016-11-11T05:59:02.516Z,1478843942.516 [NAL9602](INFO): Powering down
2016-11-11T05:59:02.544Z,1478843942.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:02.577Z,1478843942.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:02.909Z,1478843942.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:02.924Z,1478843942.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:03.277Z,1478843943.277 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0029.lzma.bak
2016-11-11T05:59:03.277Z,1478843943.277 [DataOverHttps](INFO): SBD MOMSN=4555072
2016-11-11T05:59:03.301Z,1478843943.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:03.378Z,1478843943.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:04.641Z,1478843944.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:04.703Z,1478843944.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:04.724Z,1478843944.724 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T05:59:04.724Z,1478843944.724 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T05:59:04.724Z,1478843944.724 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T05:59:04.797Z,1478843944.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:04.825Z,1478843944.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:08.038Z,1478843948.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:08.094Z,1478843948.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:08.185Z,1478843948.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:08.217Z,1478843948.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:08.554Z,1478843948.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:08.609Z,1478843948.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:08.964Z,1478843948.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:09.007Z,1478843949.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:09.347Z,1478843949.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:09.362Z,1478843949.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:09.748Z,1478843949.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:09.763Z,1478843949.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:10.147Z,1478843950.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:10.169Z,1478843950.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:10.548Z,1478843950.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:10.573Z,1478843950.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:10.955Z,1478843950.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:10.970Z,1478843950.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:11.351Z,1478843951.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:11.377Z,1478843951.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:11.753Z,1478843951.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:11.775Z,1478843951.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:12.156Z,1478843952.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:12.172Z,1478843952.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:12.547Z,1478843952.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:12.581Z,1478843952.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:12.947Z,1478843952.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:12.985Z,1478843952.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:13.347Z,1478843953.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:13.381Z,1478843953.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:13.747Z,1478843953.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:13.782Z,1478843953.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:14.147Z,1478843954.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:14.170Z,1478843954.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:14.551Z,1478843954.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:14.591Z,1478843954.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:14.960Z,1478843954.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:15.017Z,1478843955.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:15.360Z,1478843955.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:15.392Z,1478843955.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:15.749Z,1478843955.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:15.781Z,1478843955.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:16.149Z,1478843956.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:16.181Z,1478843956.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:16.553Z,1478843956.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:16.581Z,1478843956.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:16.985Z,1478843956.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:16.000Z,1478843957.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:17.350Z,1478843957.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:17.369Z,1478843957.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:17.765Z,1478843957.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:17.780Z,1478843957.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:18.163Z,1478843958.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:18.185Z,1478843958.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:18.571Z,1478843958.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:18.618Z,1478843958.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:18.946Z,1478843958.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:18.963Z,1478843958.963 [BPC1](ERROR): Failed to parse message.
2016-11-11T05:59:18.963Z,1478843958.963 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T05:59:18.967Z,1478843958.967 [BPC1] Data Fault, FailCount= 1
2016-11-11T05:59:18.967Z,1478843958.967 [BPC1](ERROR): Data Fault
2016-11-11T05:59:18.984Z,1478843958.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:19.034Z,1478843959.034 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T05:59:19.354Z,1478843959.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:19.389Z,1478843959.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:19.757Z,1478843959.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:19.792Z,1478843959.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:20.180Z,1478843960.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:20.224Z,1478843960.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:20.286Z,1478843960.286 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T05:59:20.286Z,1478843960.286 [BPC1] No Fault, FailCount= 1
2016-11-11T05:59:20.552Z,1478843960.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:20.626Z,1478843960.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:20.954Z,1478843960.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:21.005Z,1478843961.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:21.357Z,1478843961.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:21.373Z,1478843961.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:21.754Z,1478843961.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:21.769Z,1478843961.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:22.153Z,1478843962.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:22.181Z,1478843962.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:22.547Z,1478843962.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:22.573Z,1478843962.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:22.947Z,1478843962.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:22.973Z,1478843962.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:23.347Z,1478843963.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:23.381Z,1478843963.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:23.751Z,1478843963.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:23.778Z,1478843963.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:24.147Z,1478843964.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:24.181Z,1478843964.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:24.547Z,1478843964.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:24.581Z,1478843964.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:24.947Z,1478843964.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:24.982Z,1478843964.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:25.347Z,1478843965.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:25.381Z,1478843965.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:25.747Z,1478843965.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:25.781Z,1478843965.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:26.147Z,1478843966.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:26.174Z,1478843966.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:26.547Z,1478843966.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:26.581Z,1478843966.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:26.959Z,1478843966.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:26.984Z,1478843966.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:27.347Z,1478843967.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:27.370Z,1478843967.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:27.747Z,1478843967.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:27.797Z,1478843967.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:28.147Z,1478843968.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:28.193Z,1478843968.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:28.547Z,1478843968.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:28.563Z,1478843968.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:28.955Z,1478843968.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:28.969Z,1478843968.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:29.350Z,1478843969.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:29.365Z,1478843969.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:29.755Z,1478843969.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:29.770Z,1478843969.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:30.155Z,1478843970.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:30.169Z,1478843970.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:30.559Z,1478843970.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:30.574Z,1478843970.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:30.955Z,1478843970.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:30.977Z,1478843970.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:31.372Z,1478843971.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:31.421Z,1478843971.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:31.761Z,1478843971.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:31.814Z,1478843971.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:32.154Z,1478843972.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:32.169Z,1478843972.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:32.549Z,1478843972.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:32.597Z,1478843972.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:32.957Z,1478843972.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:32.977Z,1478843972.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:33.347Z,1478843973.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:33.389Z,1478843973.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:33.751Z,1478843973.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:33.790Z,1478843973.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:34.175Z,1478843974.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:34.190Z,1478843974.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:34.559Z,1478843974.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:34.575Z,1478843974.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:35.002Z,1478843975.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:35.053Z,1478843975.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:35.350Z,1478843975.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:35.369Z,1478843975.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:35.758Z,1478843975.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:35.774Z,1478843975.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:36.157Z,1478843976.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:36.177Z,1478843976.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:36.563Z,1478843976.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:36.582Z,1478843976.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:36.961Z,1478843976.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:36.976Z,1478843976.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:37.351Z,1478843977.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:37.366Z,1478843977.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:37.751Z,1478843977.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:37.773Z,1478843977.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:38.151Z,1478843978.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:38.166Z,1478843978.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:38.549Z,1478843978.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:38.564Z,1478843978.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:38.952Z,1478843978.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:38.973Z,1478843978.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:39.347Z,1478843979.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:39.362Z,1478843979.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:39.751Z,1478843979.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:39.766Z,1478843979.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:40.164Z,1478843980.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:40.180Z,1478843980.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:40.551Z,1478843980.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:40.567Z,1478843980.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:40.955Z,1478843980.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:41.011Z,1478843981.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:41.348Z,1478843981.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:41.363Z,1478843981.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:41.751Z,1478843981.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:41.766Z,1478843981.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:42.147Z,1478843982.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:42.169Z,1478843982.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:42.551Z,1478843982.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:42.567Z,1478843982.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:42.952Z,1478843982.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:42.973Z,1478843982.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:43.351Z,1478843983.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:43.366Z,1478843983.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:43.771Z,1478843983.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:43.789Z,1478843983.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:44.151Z,1478843984.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:44.166Z,1478843984.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:44.551Z,1478843984.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:44.586Z,1478843984.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:44.952Z,1478843984.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:44.967Z,1478843984.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:45.351Z,1478843985.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:45.367Z,1478843985.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:45.747Z,1478843985.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:45.789Z,1478843985.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:46.151Z,1478843986.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:46.166Z,1478843986.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:46.547Z,1478843986.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:46.593Z,1478843986.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:46.947Z,1478843986.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:46.969Z,1478843986.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:47.352Z,1478843987.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:47.473Z,1478843987.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:47.780Z,1478843987.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:47.812Z,1478843987.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:48.156Z,1478843988.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:48.194Z,1478843988.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:48.553Z,1478843988.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:48.569Z,1478843988.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:48.953Z,1478843988.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:48.973Z,1478843988.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:49.354Z,1478843989.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:49.381Z,1478843989.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:49.748Z,1478843989.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:49.777Z,1478843989.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:50.148Z,1478843990.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:50.177Z,1478843990.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:50.556Z,1478843990.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:50.585Z,1478843990.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:50.957Z,1478843990.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:50.981Z,1478843990.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:51.364Z,1478843991.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:51.408Z,1478843991.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:51.746Z,1478843991.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:51.777Z,1478843991.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:52.154Z,1478843992.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:52.175Z,1478843992.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:52.552Z,1478843992.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:52.583Z,1478843992.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:52.980Z,1478843992.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:53.025Z,1478843993.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:53.352Z,1478843993.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:53.375Z,1478843993.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:53.753Z,1478843993.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:53.768Z,1478843993.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:54.158Z,1478843994.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:54.197Z,1478843994.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:54.553Z,1478843994.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:54.568Z,1478843994.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:54.953Z,1478843994.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:54.972Z,1478843994.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:55.357Z,1478843995.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:55.373Z,1478843995.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:55.758Z,1478843995.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:55.774Z,1478843995.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:56.148Z,1478843996.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:56.181Z,1478843996.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:56.547Z,1478843996.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:56.577Z,1478843996.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:56.961Z,1478843996.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:56.985Z,1478843996.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:57.347Z,1478843997.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:57.375Z,1478843997.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:57.747Z,1478843997.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:57.785Z,1478843997.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:58.147Z,1478843998.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:58.162Z,1478843998.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:58.554Z,1478843998.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:58.592Z,1478843998.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:58.950Z,1478843998.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:58.997Z,1478843998.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:59.354Z,1478843999.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:59.369Z,1478843999.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T05:59:59.757Z,1478843999.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T05:59:59.773Z,1478843999.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:00.147Z,1478844000.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:00.201Z,1478844000.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:00.547Z,1478844000.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:00.570Z,1478844000.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:00.947Z,1478844000.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:01.007Z,1478844001.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:01.353Z,1478844001.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:01.367Z,1478844001.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:01.753Z,1478844001.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:01.806Z,1478844001.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:02.154Z,1478844002.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:02.212Z,1478844002.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:02.550Z,1478844002.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:02.569Z,1478844002.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:02.950Z,1478844002.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:02.992Z,1478844002.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:03.354Z,1478844003.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:03.370Z,1478844003.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:03.758Z,1478844003.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:03.781Z,1478844003.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:04.176Z,1478844004.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:04.231Z,1478844004.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:04.556Z,1478844004.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:04.595Z,1478844004.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:04.952Z,1478844004.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:04.967Z,1478844004.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:05.353Z,1478844005.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:05.368Z,1478844005.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:08.691Z,1478844008.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:08.707Z,1478844008.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:08.809Z,1478844008.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:08.844Z,1478844008.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:09.196Z,1478844009.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:09.212Z,1478844009.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:09.598Z,1478844009.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:09.614Z,1478844009.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:09.985Z,1478844009.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:10.012Z,1478844010.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:10.396Z,1478844010.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:10.417Z,1478844010.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:10.794Z,1478844010.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:10.816Z,1478844010.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:11.185Z,1478844011.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:11.221Z,1478844011.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:11.586Z,1478844011.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:11.614Z,1478844011.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:11.986Z,1478844011.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:12.025Z,1478844012.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:12.385Z,1478844012.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:12.421Z,1478844012.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:12.785Z,1478844012.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:12.801Z,1478844012.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:13.185Z,1478844013.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:13.237Z,1478844013.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:13.592Z,1478844013.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:13.613Z,1478844013.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:13.988Z,1478844013.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:14.004Z,1478844014.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:14.392Z,1478844014.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:14.445Z,1478844014.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:14.792Z,1478844014.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:14.814Z,1478844014.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:15.196Z,1478844015.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:15.211Z,1478844015.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:15.592Z,1478844015.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:15.644Z,1478844015.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:15.992Z,1478844015.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:16.007Z,1478844016.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:16.392Z,1478844016.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:16.431Z,1478844016.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:16.792Z,1478844016.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:16.854Z,1478844016.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:17.185Z,1478844017.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:17.209Z,1478844017.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:17.585Z,1478844017.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:17.610Z,1478844017.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:17.985Z,1478844017.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:18.018Z,1478844018.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:18.385Z,1478844018.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:18.419Z,1478844018.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:18.785Z,1478844018.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:18.817Z,1478844018.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:19.185Z,1478844019.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:19.200Z,1478844019.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:19.592Z,1478844019.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:19.627Z,1478844019.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:19.988Z,1478844019.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:20.009Z,1478844020.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:20.388Z,1478844020.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:20.404Z,1478844020.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:20.790Z,1478844020.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:20.805Z,1478844020.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:21.196Z,1478844021.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:21.217Z,1478844021.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:21.588Z,1478844021.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:21.604Z,1478844021.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:21.991Z,1478844021.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:22.029Z,1478844022.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:22.393Z,1478844022.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:22.413Z,1478844022.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:22.785Z,1478844022.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:22.810Z,1478844022.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:23.185Z,1478844023.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:23.218Z,1478844023.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:23.585Z,1478844023.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:23.618Z,1478844023.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:23.996Z,1478844023.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:24.012Z,1478844024.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:24.385Z,1478844024.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:24.421Z,1478844024.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:24.785Z,1478844024.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:24.810Z,1478844024.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:25.185Z,1478844025.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:25.217Z,1478844025.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:25.585Z,1478844025.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:25.618Z,1478844025.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:25.985Z,1478844025.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:26.021Z,1478844026.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:26.385Z,1478844026.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:26.421Z,1478844026.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:26.785Z,1478844026.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:26.821Z,1478844026.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:27.185Z,1478844027.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:27.221Z,1478844027.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:27.585Z,1478844027.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:27.621Z,1478844027.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:27.985Z,1478844027.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:28.021Z,1478844028.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:28.385Z,1478844028.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:28.421Z,1478844028.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:28.789Z,1478844028.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:28.849Z,1478844028.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:29.185Z,1478844029.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:29.205Z,1478844029.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:29.585Z,1478844029.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:29.632Z,1478844029.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:29.985Z,1478844029.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:30.005Z,1478844030.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:30.385Z,1478844030.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:30.436Z,1478844030.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:30.785Z,1478844030.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:30.836Z,1478844030.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:31.188Z,1478844031.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:31.209Z,1478844031.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:31.588Z,1478844031.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:31.609Z,1478844031.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:31.992Z,1478844031.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:32.007Z,1478844032.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:32.396Z,1478844032.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:32.411Z,1478844032.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:32.792Z,1478844032.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:32.813Z,1478844032.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:33.193Z,1478844033.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:33.213Z,1478844033.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:33.588Z,1478844033.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:33.610Z,1478844033.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:33.988Z,1478844033.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:34.013Z,1478844034.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:34.392Z,1478844034.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:34.417Z,1478844034.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:34.796Z,1478844034.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:34.812Z,1478844034.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:35.185Z,1478844035.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:35.218Z,1478844035.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:35.585Z,1478844035.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:35.618Z,1478844035.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:35.992Z,1478844035.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:36.015Z,1478844036.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:36.385Z,1478844036.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:36.419Z,1478844036.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:36.785Z,1478844036.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:36.818Z,1478844036.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:37.185Z,1478844037.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:37.217Z,1478844037.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:37.585Z,1478844037.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:37.619Z,1478844037.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:37.985Z,1478844037.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:38.017Z,1478844038.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:38.400Z,1478844038.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:38.421Z,1478844038.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:38.785Z,1478844038.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:38.819Z,1478844038.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:39.189Z,1478844039.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:39.221Z,1478844039.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:39.589Z,1478844039.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:39.621Z,1478844039.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:39.985Z,1478844039.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:40.013Z,1478844040.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:40.385Z,1478844040.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:40.421Z,1478844040.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:40.793Z,1478844040.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:40.818Z,1478844040.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:41.189Z,1478844041.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:41.221Z,1478844041.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:41.585Z,1478844041.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:41.612Z,1478844041.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:41.985Z,1478844041.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:42.005Z,1478844042.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:42.388Z,1478844042.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:42.449Z,1478844042.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:42.785Z,1478844042.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:42.841Z,1478844042.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:43.193Z,1478844043.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:43.208Z,1478844043.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:43.592Z,1478844043.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:43.643Z,1478844043.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:43.993Z,1478844043.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:44.007Z,1478844044.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:44.396Z,1478844044.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:44.449Z,1478844044.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:44.792Z,1478844044.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:44.847Z,1478844044.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:45.193Z,1478844045.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:45.213Z,1478844045.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:45.596Z,1478844045.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:45.612Z,1478844045.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:45.985Z,1478844045.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:46.019Z,1478844046.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:46.385Z,1478844046.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:46.421Z,1478844046.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:46.785Z,1478844046.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:46.817Z,1478844046.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:47.185Z,1478844047.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:47.219Z,1478844047.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:47.586Z,1478844047.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:47.622Z,1478844047.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:47.991Z,1478844047.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:48.010Z,1478844048.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:48.393Z,1478844048.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:48.408Z,1478844048.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:48.794Z,1478844048.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:48.809Z,1478844048.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:49.193Z,1478844049.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:49.208Z,1478844049.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:49.592Z,1478844049.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:49.611Z,1478844049.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:49.993Z,1478844049.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:50.013Z,1478844050.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:50.393Z,1478844050.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:50.409Z,1478844050.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:50.785Z,1478844050.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:50.819Z,1478844050.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:51.185Z,1478844051.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:51.221Z,1478844051.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:51.585Z,1478844051.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:51.621Z,1478844051.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:51.985Z,1478844051.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:52.018Z,1478844052.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:52.389Z,1478844052.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:52.422Z,1478844052.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:52.785Z,1478844052.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:52.817Z,1478844052.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:53.193Z,1478844053.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:53.228Z,1478844053.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:53.585Z,1478844053.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:53.617Z,1478844053.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:53.989Z,1478844053.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:54.021Z,1478844054.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:54.385Z,1478844054.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:54.421Z,1478844054.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:54.785Z,1478844054.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:54.817Z,1478844054.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:55.185Z,1478844055.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:55.217Z,1478844055.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:55.589Z,1478844055.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:55.625Z,1478844055.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:55.985Z,1478844055.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:56.028Z,1478844056.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:56.389Z,1478844056.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:56.398Z,1478844056.398 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T06:00:56.398Z,1478844056.398 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:00:56.398Z,1478844056.398 [BPC1](ERROR): Data Fault
2016-11-11T06:00:56.418Z,1478844056.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:56.463Z,1478844056.463 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:00:56.796Z,1478844056.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:56.811Z,1478844056.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:57.188Z,1478844057.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:57.209Z,1478844057.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:57.592Z,1478844057.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:57.607Z,1478844057.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:57.643Z,1478844057.643 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:00:57.644Z,1478844057.644 [BPC1] No Fault, FailCount= 1
2016-11-11T06:00:57.996Z,1478844057.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:58.058Z,1478844058.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:58.392Z,1478844058.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:58.443Z,1478844058.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:58.792Z,1478844058.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:58.807Z,1478844058.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:59.191Z,1478844059.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:59.217Z,1478844059.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:59.596Z,1478844059.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:00:59.611Z,1478844059.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:00:59.985Z,1478844059.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:00.017Z,1478844060.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:00.385Z,1478844060.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:00.418Z,1478844060.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:00.785Z,1478844060.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:00.810Z,1478844060.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:01.185Z,1478844061.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:01.217Z,1478844061.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:01.585Z,1478844061.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:01.618Z,1478844061.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:01.985Z,1478844061.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:02.018Z,1478844062.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:02.385Z,1478844062.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:02.421Z,1478844062.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:02.785Z,1478844062.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:02.816Z,1478844062.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:03.185Z,1478844063.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:03.220Z,1478844063.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:03.585Z,1478844063.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:03.608Z,1478844063.608 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:03.608Z,1478844063.608 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2016-11-11T06:01:03.609Z,1478844063.609 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:01:03.620Z,1478844063.620 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:03.620Z,1478844063.620 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2016-11-11T06:01:03.620Z,1478844063.620 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:01:03.650Z,1478844063.650 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:01:03.650Z,1478844063.650 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:01:03.985Z,1478844063.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:04.038Z,1478844064.037 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:01:04.038Z,1478844064.038 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2016-11-11T06:01:04.038Z,1478844064.038 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:01:04.038Z,1478844064.038 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2016-11-11T06:01:04.385Z,1478844064.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:04.398Z,1478844064.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:01:04.399Z,1478844064.399 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:01:04.411Z,1478844064.411 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:01:04.427Z,1478844064.427 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:01:04.428Z,1478844064.428 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:01:04.428Z,1478844064.428 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:01:04.785Z,1478844064.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:04.804Z,1478844064.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:01:04.805Z,1478844064.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:05.191Z,1478844065.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:05.212Z,1478844065.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:01:05.213Z,1478844065.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:05.593Z,1478844065.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:05.607Z,1478844065.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:01:05.608Z,1478844065.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:08.878Z,1478844068.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:08.903Z,1478844068.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2016-11-11T06:01:08.904Z,1478844068.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:08.915Z,1478844068.915 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:08.915Z,1478844068.915 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 5
2016-11-11T06:01:08.916Z,1478844068.916 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:01:08.930Z,1478844068.930 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:01:09.024Z,1478844069.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:09.044Z,1478844069.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2016-11-11T06:01:09.045Z,1478844069.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:09.100Z,1478844069.100 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:01:09.100Z,1478844069.100 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 5
2016-11-11T06:01:09.410Z,1478844069.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:09.444Z,1478844069.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2016-11-11T06:01:09.445Z,1478844069.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:09.458Z,1478844069.458 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:01:09.459Z,1478844069.459 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:01:09.459Z,1478844069.459 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:01:09.814Z,1478844069.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:09.853Z,1478844069.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2016-11-11T06:01:09.854Z,1478844069.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:10.209Z,1478844070.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:10.288Z,1478844070.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2016-11-11T06:01:10.289Z,1478844070.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:10.609Z,1478844070.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:10.624Z,1478844070.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2016-11-11T06:01:10.625Z,1478844070.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:11.009Z,1478844071.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:11.025Z,1478844071.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2016-11-11T06:01:11.026Z,1478844071.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:11.415Z,1478844071.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:11.456Z,1478844071.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2016-11-11T06:01:11.457Z,1478844071.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:11.815Z,1478844071.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:11.830Z,1478844071.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2016-11-11T06:01:11.831Z,1478844071.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:12.213Z,1478844072.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:12.265Z,1478844072.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2016-11-11T06:01:12.266Z,1478844072.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:12.616Z,1478844072.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:12.678Z,1478844072.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2016-11-11T06:01:12.680Z,1478844072.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:13.015Z,1478844073.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:13.036Z,1478844073.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2016-11-11T06:01:13.037Z,1478844073.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:13.416Z,1478844073.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:13.431Z,1478844073.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2016-11-11T06:01:13.432Z,1478844073.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:13.816Z,1478844073.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:13.836Z,1478844073.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2016-11-11T06:01:13.837Z,1478844073.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:14.209Z,1478844074.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:14.245Z,1478844074.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2016-11-11T06:01:14.246Z,1478844074.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:14.609Z,1478844074.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:14.641Z,1478844074.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2016-11-11T06:01:14.642Z,1478844074.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:15.009Z,1478844075.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:15.044Z,1478844075.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2016-11-11T06:01:15.045Z,1478844075.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:15.409Z,1478844075.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:15.440Z,1478844075.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2016-11-11T06:01:15.442Z,1478844075.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:15.809Z,1478844075.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:15.836Z,1478844075.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2016-11-11T06:01:15.837Z,1478844075.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:16.209Z,1478844076.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:16.244Z,1478844076.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2016-11-11T06:01:16.245Z,1478844076.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:16.609Z,1478844076.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:16.636Z,1478844076.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2016-11-11T06:01:16.637Z,1478844076.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:17.009Z,1478844077.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:17.024Z,1478844077.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2016-11-11T06:01:17.025Z,1478844077.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:17.409Z,1478844077.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:17.428Z,1478844077.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2016-11-11T06:01:17.429Z,1478844077.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:17.809Z,1478844077.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:17.823Z,1478844077.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2016-11-11T06:01:17.824Z,1478844077.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:18.209Z,1478844078.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:18.224Z,1478844078.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2016-11-11T06:01:18.225Z,1478844078.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:18.615Z,1478844078.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:18.629Z,1478844078.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2016-11-11T06:01:18.630Z,1478844078.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:19.017Z,1478844079.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:19.031Z,1478844079.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2016-11-11T06:01:19.032Z,1478844079.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:19.415Z,1478844079.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:19.430Z,1478844079.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2016-11-11T06:01:19.431Z,1478844079.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:19.816Z,1478844079.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:19.830Z,1478844079.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2016-11-11T06:01:19.832Z,1478844079.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:20.220Z,1478844080.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:20.240Z,1478844080.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2016-11-11T06:01:20.241Z,1478844080.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:20.616Z,1478844080.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:20.642Z,1478844080.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2016-11-11T06:01:20.644Z,1478844080.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:21.009Z,1478844081.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:21.042Z,1478844081.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2016-11-11T06:01:21.043Z,1478844081.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:21.409Z,1478844081.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:21.441Z,1478844081.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2016-11-11T06:01:21.442Z,1478844081.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:21.809Z,1478844081.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:21.841Z,1478844081.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2016-11-11T06:01:21.842Z,1478844081.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:22.209Z,1478844082.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:22.244Z,1478844082.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2016-11-11T06:01:22.245Z,1478844082.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:22.609Z,1478844082.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:22.644Z,1478844082.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2016-11-11T06:01:22.645Z,1478844082.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:23.013Z,1478844083.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:23.044Z,1478844083.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2016-11-11T06:01:23.045Z,1478844083.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:23.409Z,1478844083.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:23.428Z,1478844083.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2016-11-11T06:01:23.429Z,1478844083.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:23.817Z,1478844083.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:23.832Z,1478844083.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:24.217Z,1478844084.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:24.232Z,1478844084.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:24.616Z,1478844084.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:24.700Z,1478844084.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:25.016Z,1478844085.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:25.031Z,1478844085.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:25.416Z,1478844085.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:25.440Z,1478844085.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:25.824Z,1478844085.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:25.879Z,1478844085.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:26.209Z,1478844086.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:26.242Z,1478844086.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:26.609Z,1478844086.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:26.669Z,1478844086.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:27.009Z,1478844087.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:27.058Z,1478844087.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:27.409Z,1478844087.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:27.442Z,1478844087.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:27.809Z,1478844087.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:27.841Z,1478844087.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:28.209Z,1478844088.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:28.241Z,1478844088.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:28.609Z,1478844088.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:28.634Z,1478844088.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:29.009Z,1478844089.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:29.039Z,1478844089.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:29.413Z,1478844089.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:29.445Z,1478844089.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:29.809Z,1478844089.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:29.842Z,1478844089.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:30.209Z,1478844090.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:30.241Z,1478844090.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:30.613Z,1478844090.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:30.653Z,1478844090.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:31.009Z,1478844091.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:31.045Z,1478844091.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:31.409Z,1478844091.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:31.432Z,1478844091.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:31.813Z,1478844091.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:31.849Z,1478844091.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:32.209Z,1478844092.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:32.224Z,1478844092.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:32.609Z,1478844092.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:32.624Z,1478844092.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:33.012Z,1478844093.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:33.040Z,1478844093.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:33.415Z,1478844093.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:33.430Z,1478844093.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:33.815Z,1478844093.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:33.830Z,1478844093.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:34.212Z,1478844094.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:34.242Z,1478844094.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:34.615Z,1478844094.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:34.638Z,1478844094.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:35.009Z,1478844095.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:35.035Z,1478844095.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:35.409Z,1478844095.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:35.434Z,1478844095.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:35.809Z,1478844095.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:35.841Z,1478844095.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:36.209Z,1478844096.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:36.241Z,1478844096.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:36.609Z,1478844096.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:36.636Z,1478844096.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:37.020Z,1478844097.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:37.041Z,1478844097.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:37.420Z,1478844097.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:37.435Z,1478844097.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:37.813Z,1478844097.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:37.845Z,1478844097.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:38.209Z,1478844098.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:38.234Z,1478844098.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:38.609Z,1478844098.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:38.641Z,1478844098.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:39.009Z,1478844099.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:39.061Z,1478844099.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:39.409Z,1478844099.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:39.465Z,1478844099.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:39.809Z,1478844099.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:39.825Z,1478844099.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:40.213Z,1478844100.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:40.269Z,1478844100.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:40.609Z,1478844100.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:40.629Z,1478844100.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:41.017Z,1478844101.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:41.069Z,1478844101.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:41.417Z,1478844101.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:41.469Z,1478844101.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:41.812Z,1478844101.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:41.857Z,1478844101.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:42.209Z,1478844102.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:42.234Z,1478844102.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:42.620Z,1478844102.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:42.648Z,1478844102.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:43.009Z,1478844103.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:43.041Z,1478844103.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:43.409Z,1478844103.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:43.441Z,1478844103.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:43.813Z,1478844103.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:43.845Z,1478844103.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:44.209Z,1478844104.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:44.242Z,1478844104.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:44.609Z,1478844104.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:44.645Z,1478844104.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:45.009Z,1478844105.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:45.041Z,1478844105.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:45.409Z,1478844105.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:45.451Z,1478844105.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:45.809Z,1478844105.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:45.836Z,1478844105.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:46.213Z,1478844106.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:46.245Z,1478844106.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:46.609Z,1478844106.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:46.647Z,1478844106.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:47.009Z,1478844107.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:47.053Z,1478844107.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:47.413Z,1478844107.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:47.455Z,1478844107.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:47.809Z,1478844107.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:47.853Z,1478844107.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:48.210Z,1478844108.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:48.225Z,1478844108.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:48.610Z,1478844108.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:48.629Z,1478844108.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:49.013Z,1478844109.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:49.033Z,1478844109.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:49.414Z,1478844109.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:49.430Z,1478844109.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:49.817Z,1478844109.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:49.833Z,1478844109.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:50.218Z,1478844110.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:50.232Z,1478844110.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:50.618Z,1478844110.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:50.633Z,1478844110.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:51.016Z,1478844111.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:51.032Z,1478844111.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:51.416Z,1478844111.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:51.431Z,1478844111.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:51.820Z,1478844111.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:51.837Z,1478844111.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:52.217Z,1478844112.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:52.238Z,1478844112.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:52.609Z,1478844112.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:52.644Z,1478844112.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:53.016Z,1478844113.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:53.039Z,1478844113.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:53.409Z,1478844113.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:53.477Z,1478844113.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:53.809Z,1478844113.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:53.829Z,1478844113.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:54.213Z,1478844114.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:54.265Z,1478844114.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:54.609Z,1478844114.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:54.637Z,1478844114.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:55.016Z,1478844115.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:55.064Z,1478844115.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:55.416Z,1478844115.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:55.468Z,1478844115.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:55.816Z,1478844115.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:55.837Z,1478844115.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:56.216Z,1478844116.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:56.231Z,1478844116.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:56.616Z,1478844116.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:56.632Z,1478844116.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:57.017Z,1478844117.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:57.032Z,1478844117.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:57.416Z,1478844117.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:57.437Z,1478844117.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:57.809Z,1478844117.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:57.835Z,1478844117.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:58.209Z,1478844118.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:58.249Z,1478844118.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:58.609Z,1478844118.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:58.643Z,1478844118.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:59.009Z,1478844119.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:59.041Z,1478844119.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:59.409Z,1478844119.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:59.442Z,1478844119.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:01:59.809Z,1478844119.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:01:59.842Z,1478844119.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:00.209Z,1478844120.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:00.245Z,1478844120.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:00.609Z,1478844120.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:00.640Z,1478844120.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:01.009Z,1478844121.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:01.040Z,1478844121.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:01.409Z,1478844121.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:01.432Z,1478844121.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:01.809Z,1478844121.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:01.841Z,1478844121.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:02.209Z,1478844122.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:02.252Z,1478844122.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:02.613Z,1478844122.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:02.649Z,1478844122.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:03.009Z,1478844123.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:03.052Z,1478844123.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:03.409Z,1478844123.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:03.449Z,1478844123.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:03.809Z,1478844123.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:03.849Z,1478844123.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:04.209Z,1478844124.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:04.224Z,1478844124.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:04.613Z,1478844124.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:04.633Z,1478844124.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:05.009Z,1478844125.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:05.024Z,1478844125.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:05.415Z,1478844125.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:05.430Z,1478844125.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:05.818Z,1478844125.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:05.833Z,1478844125.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:09.094Z,1478844129.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:09.181Z,1478844129.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:09.270Z,1478844129.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:09.301Z,1478844129.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:09.657Z,1478844129.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:09.691Z,1478844129.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:10.057Z,1478844130.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:10.115Z,1478844130.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:10.464Z,1478844130.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:10.489Z,1478844130.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:10.857Z,1478844130.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:10.902Z,1478844130.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:11.257Z,1478844131.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:11.313Z,1478844131.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:11.661Z,1478844131.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:11.693Z,1478844131.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:12.057Z,1478844132.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:12.094Z,1478844132.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:12.458Z,1478844132.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:12.501Z,1478844132.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:12.858Z,1478844132.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:12.873Z,1478844132.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:13.261Z,1478844133.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:13.301Z,1478844133.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:13.661Z,1478844133.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:13.677Z,1478844133.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:14.057Z,1478844134.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:14.085Z,1478844134.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:14.465Z,1478844134.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:14.479Z,1478844134.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:14.864Z,1478844134.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:14.880Z,1478844134.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:15.257Z,1478844135.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:15.289Z,1478844135.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:15.657Z,1478844135.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:15.695Z,1478844135.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:16.057Z,1478844136.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:16.081Z,1478844136.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:16.457Z,1478844136.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:16.497Z,1478844136.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:16.857Z,1478844136.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:16.877Z,1478844136.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:17.257Z,1478844137.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:17.272Z,1478844137.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:17.657Z,1478844137.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:17.677Z,1478844137.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:18.060Z,1478844138.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:18.081Z,1478844138.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:18.464Z,1478844138.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:18.479Z,1478844138.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:18.864Z,1478844138.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:18.879Z,1478844138.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:19.264Z,1478844139.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:19.279Z,1478844139.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:19.657Z,1478844139.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:19.689Z,1478844139.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:20.057Z,1478844140.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:20.090Z,1478844140.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:20.457Z,1478844140.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:20.493Z,1478844140.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:20.857Z,1478844140.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:20.888Z,1478844140.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:21.257Z,1478844141.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:21.292Z,1478844141.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:21.657Z,1478844141.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:21.693Z,1478844141.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:22.057Z,1478844142.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:22.094Z,1478844142.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:22.457Z,1478844142.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:22.493Z,1478844142.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:22.857Z,1478844142.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:22.893Z,1478844142.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:23.261Z,1478844143.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:23.337Z,1478844143.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:23.657Z,1478844143.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:23.694Z,1478844143.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:24.064Z,1478844144.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:24.079Z,1478844144.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:24.465Z,1478844144.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:24.522Z,1478844144.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:24.864Z,1478844144.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:24.885Z,1478844144.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:25.257Z,1478844145.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:25.306Z,1478844145.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:25.657Z,1478844145.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:25.713Z,1478844145.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:26.057Z,1478844146.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:26.091Z,1478844146.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:26.457Z,1478844146.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:26.489Z,1478844146.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:26.857Z,1478844146.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:26.877Z,1478844146.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:27.257Z,1478844147.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:27.277Z,1478844147.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:27.657Z,1478844147.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:27.672Z,1478844147.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:28.060Z,1478844148.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:28.076Z,1478844148.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:28.464Z,1478844148.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:28.481Z,1478844148.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:28.867Z,1478844148.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:28.889Z,1478844148.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:29.264Z,1478844149.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:29.279Z,1478844149.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:29.665Z,1478844149.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:29.685Z,1478844149.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:30.057Z,1478844150.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:30.090Z,1478844150.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:30.457Z,1478844150.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:30.488Z,1478844150.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:30.857Z,1478844150.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:30.892Z,1478844150.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:31.257Z,1478844151.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:31.281Z,1478844151.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:31.657Z,1478844151.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:31.680Z,1478844151.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:32.057Z,1478844152.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:32.092Z,1478844152.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:32.457Z,1478844152.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:32.496Z,1478844152.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:32.864Z,1478844152.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:32.880Z,1478844152.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:33.264Z,1478844153.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:33.279Z,1478844153.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:33.664Z,1478844153.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:33.679Z,1478844153.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:34.063Z,1478844154.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:34.078Z,1478844154.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:34.464Z,1478844154.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:34.493Z,1478844154.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:34.865Z,1478844154.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:34.893Z,1478844154.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:35.257Z,1478844155.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:35.280Z,1478844155.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:35.663Z,1478844155.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:35.678Z,1478844155.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:36.061Z,1478844156.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:36.076Z,1478844156.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:36.464Z,1478844156.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:36.479Z,1478844156.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:36.863Z,1478844156.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:36.902Z,1478844156.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:37.257Z,1478844157.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:37.293Z,1478844157.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:37.657Z,1478844157.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:37.733Z,1478844157.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:38.057Z,1478844158.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:38.100Z,1478844158.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:38.457Z,1478844158.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:38.497Z,1478844158.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:38.863Z,1478844158.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:38.908Z,1478844158.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:39.257Z,1478844159.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:39.285Z,1478844159.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:39.671Z,1478844159.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:39.719Z,1478844159.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:40.064Z,1478844160.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:40.113Z,1478844160.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:40.464Z,1478844160.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:40.485Z,1478844160.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:40.856Z,1478844160.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:40.892Z,1478844160.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:41.257Z,1478844161.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:41.289Z,1478844161.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:41.657Z,1478844161.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:41.682Z,1478844161.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:42.064Z,1478844162.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:42.087Z,1478844162.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:42.457Z,1478844162.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:42.492Z,1478844162.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:42.857Z,1478844162.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:42.891Z,1478844162.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:43.264Z,1478844163.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:43.286Z,1478844163.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:43.657Z,1478844163.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:43.693Z,1478844163.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:44.057Z,1478844164.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:44.088Z,1478844164.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:44.461Z,1478844164.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:44.486Z,1478844164.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:44.857Z,1478844164.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:44.893Z,1478844164.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:45.257Z,1478844165.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:45.292Z,1478844165.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:45.657Z,1478844165.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:45.693Z,1478844165.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:46.057Z,1478844166.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:46.088Z,1478844166.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:46.457Z,1478844166.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:46.500Z,1478844166.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:46.857Z,1478844166.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:46.897Z,1478844166.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:47.261Z,1478844167.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:47.277Z,1478844167.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:47.662Z,1478844167.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:47.689Z,1478844167.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:48.057Z,1478844168.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:48.089Z,1478844168.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:48.457Z,1478844168.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:48.489Z,1478844168.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:48.861Z,1478844168.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:48.886Z,1478844168.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:49.265Z,1478844169.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:49.291Z,1478844169.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:49.657Z,1478844169.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:49.693Z,1478844169.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:50.061Z,1478844170.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:50.093Z,1478844170.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:50.460Z,1478844170.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:50.497Z,1478844170.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:50.865Z,1478844170.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:50.880Z,1478844170.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:51.266Z,1478844171.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:51.281Z,1478844171.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:51.664Z,1478844171.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:51.680Z,1478844171.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:52.065Z,1478844172.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:52.121Z,1478844172.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:52.457Z,1478844172.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:52.502Z,1478844172.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:52.863Z,1478844172.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:52.880Z,1478844172.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:53.263Z,1478844173.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:53.317Z,1478844173.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:53.663Z,1478844173.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:53.682Z,1478844173.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:54.064Z,1478844174.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:54.120Z,1478844174.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:54.464Z,1478844174.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:54.520Z,1478844174.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:54.864Z,1478844174.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:54.878Z,1478844174.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:55.265Z,1478844175.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:55.285Z,1478844175.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:55.657Z,1478844175.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:55.689Z,1478844175.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:56.057Z,1478844176.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:56.091Z,1478844176.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:56.457Z,1478844176.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:56.491Z,1478844176.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:56.857Z,1478844176.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:56.889Z,1478844176.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:57.257Z,1478844177.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:57.290Z,1478844177.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:57.657Z,1478844177.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:57.691Z,1478844177.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:58.057Z,1478844178.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:58.089Z,1478844178.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:58.457Z,1478844178.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:58.490Z,1478844178.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:58.857Z,1478844178.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:58.890Z,1478844178.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:59.257Z,1478844179.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:59.289Z,1478844179.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:02:59.657Z,1478844179.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:02:59.690Z,1478844179.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:00.057Z,1478844180.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:00.090Z,1478844180.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:00.457Z,1478844180.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:00.489Z,1478844180.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:00.857Z,1478844180.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:00.890Z,1478844180.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:01.257Z,1478844181.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:01.290Z,1478844181.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:01.661Z,1478844181.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:01.693Z,1478844181.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:02.057Z,1478844182.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:02.082Z,1478844182.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:02.461Z,1478844182.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:02.486Z,1478844182.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:02.857Z,1478844182.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:02.889Z,1478844182.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:03.264Z,1478844183.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:03.285Z,1478844183.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:03.663Z,1478844183.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:03.685Z,1478844183.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:04.057Z,1478844184.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:04.093Z,1478844184.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:04.457Z,1478844184.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:04.492Z,1478844184.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:04.857Z,1478844184.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:04.892Z,1478844184.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:05.257Z,1478844185.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:05.293Z,1478844185.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:05.664Z,1478844185.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:05.690Z,1478844185.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:06.061Z,1478844186.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:06.092Z,1478844186.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:10.121Z,1478844190.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:10.169Z,1478844190.169 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T06:03:10.169Z,1478844190.170 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:03:10.170Z,1478844190.170 [BPC1](ERROR): Data Fault
2016-11-11T06:03:10.222Z,1478844190.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:10.284Z,1478844190.284 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:03:10.357Z,1478844190.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:10.389Z,1478844190.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:10.728Z,1478844190.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:10.769Z,1478844190.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:11.139Z,1478844191.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:11.195Z,1478844191.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:11.276Z,1478844191.276 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:03:11.276Z,1478844191.276 [BPC1] No Fault, FailCount= 1
2016-11-11T06:03:11.519Z,1478844191.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:11.630Z,1478844191.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:11.920Z,1478844191.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:11.997Z,1478844191.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:12.331Z,1478844192.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:12.367Z,1478844192.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:12.725Z,1478844192.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:12.777Z,1478844192.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:13.124Z,1478844193.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:13.161Z,1478844193.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:13.541Z,1478844193.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:13.569Z,1478844193.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:13.921Z,1478844193.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:13.963Z,1478844193.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:14.322Z,1478844194.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:14.368Z,1478844194.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:14.728Z,1478844194.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:14.752Z,1478844194.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:15.118Z,1478844195.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:15.157Z,1478844195.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:15.518Z,1478844195.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:15.565Z,1478844195.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:15.918Z,1478844195.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:15.957Z,1478844195.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:16.322Z,1478844196.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:16.370Z,1478844196.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:16.723Z,1478844196.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:16.739Z,1478844196.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:17.140Z,1478844197.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:17.158Z,1478844197.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:17.523Z,1478844197.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:17.575Z,1478844197.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:17.920Z,1478844197.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:17.935Z,1478844197.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:18.323Z,1478844198.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:18.338Z,1478844198.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:18.732Z,1478844198.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:18.757Z,1478844198.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:19.113Z,1478844199.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:19.149Z,1478844199.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:19.513Z,1478844199.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:19.549Z,1478844199.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:19.946Z,1478844199.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:19.962Z,1478844199.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:20.321Z,1478844200.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:20.341Z,1478844200.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:20.719Z,1478844200.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:20.747Z,1478844200.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:21.128Z,1478844201.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:21.183Z,1478844201.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:21.525Z,1478844201.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:21.552Z,1478844201.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:21.916Z,1478844201.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:21.960Z,1478844201.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:22.315Z,1478844202.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:22.357Z,1478844202.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:22.715Z,1478844202.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:22.772Z,1478844202.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:23.124Z,1478844203.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:23.148Z,1478844203.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:23.535Z,1478844203.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:23.582Z,1478844203.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:23.915Z,1478844203.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:24.002Z,1478844204.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:24.319Z,1478844204.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:24.358Z,1478844204.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:24.716Z,1478844204.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:24.769Z,1478844204.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:25.121Z,1478844205.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:25.141Z,1478844205.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:25.520Z,1478844205.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:25.577Z,1478844205.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:25.914Z,1478844205.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:25.961Z,1478844205.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:26.322Z,1478844206.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:26.364Z,1478844206.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:26.720Z,1478844206.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:26.748Z,1478844206.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:27.120Z,1478844207.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:27.153Z,1478844207.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:27.515Z,1478844207.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:27.557Z,1478844207.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:27.918Z,1478844207.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:27.946Z,1478844207.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:28.320Z,1478844208.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:28.398Z,1478844208.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:28.714Z,1478844208.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:28.741Z,1478844208.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:29.120Z,1478844209.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:29.135Z,1478844209.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:29.520Z,1478844209.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:29.535Z,1478844209.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:29.920Z,1478844209.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:29.935Z,1478844209.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:30.320Z,1478844210.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:30.335Z,1478844210.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:30.720Z,1478844210.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:30.734Z,1478844210.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:31.121Z,1478844211.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:31.136Z,1478844211.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:31.520Z,1478844211.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:31.535Z,1478844211.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:31.916Z,1478844211.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:31.949Z,1478844211.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:32.321Z,1478844212.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:32.336Z,1478844212.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:32.721Z,1478844212.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:32.736Z,1478844212.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:33.128Z,1478844213.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:33.144Z,1478844213.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:33.520Z,1478844213.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:33.551Z,1478844213.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:33.913Z,1478844213.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:33.939Z,1478844213.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:34.313Z,1478844214.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:34.347Z,1478844214.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:34.713Z,1478844214.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:34.738Z,1478844214.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:35.113Z,1478844215.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:35.146Z,1478844215.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:35.528Z,1478844215.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:35.545Z,1478844215.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:35.913Z,1478844215.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:35.945Z,1478844215.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:36.313Z,1478844216.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:36.338Z,1478844216.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:36.733Z,1478844216.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:36.759Z,1478844216.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:37.132Z,1478844217.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:37.147Z,1478844217.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:37.517Z,1478844217.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:37.553Z,1478844217.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:37.913Z,1478844217.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:38.007Z,1478844218.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:38.320Z,1478844218.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:38.335Z,1478844218.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:38.720Z,1478844218.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:38.735Z,1478844218.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:39.128Z,1478844219.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:39.175Z,1478844219.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:39.520Z,1478844219.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:39.535Z,1478844219.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:39.910Z,1478844219.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:39.973Z,1478844219.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:40.328Z,1478844220.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:40.381Z,1478844220.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:40.729Z,1478844220.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:40.744Z,1478844220.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:41.123Z,1478844221.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:41.142Z,1478844221.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:41.529Z,1478844221.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:41.544Z,1478844221.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:41.913Z,1478844221.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:41.945Z,1478844221.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:42.313Z,1478844222.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:42.349Z,1478844222.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:42.720Z,1478844222.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:42.753Z,1478844222.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:43.113Z,1478844223.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:43.152Z,1478844223.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:43.513Z,1478844223.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:43.544Z,1478844223.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:43.913Z,1478844223.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:43.933Z,1478844223.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:44.313Z,1478844224.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:44.328Z,1478844224.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:44.719Z,1478844224.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:44.734Z,1478844224.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:45.121Z,1478844225.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:45.136Z,1478844225.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:45.519Z,1478844225.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:45.541Z,1478844225.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:45.920Z,1478844225.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:45.935Z,1478844225.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:46.323Z,1478844226.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:46.338Z,1478844226.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:46.721Z,1478844226.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:46.737Z,1478844226.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:47.121Z,1478844227.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:47.136Z,1478844227.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:47.513Z,1478844227.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:47.548Z,1478844227.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:47.913Z,1478844227.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:47.938Z,1478844227.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:48.328Z,1478844228.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:48.343Z,1478844228.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:48.724Z,1478844228.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:48.747Z,1478844228.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:49.117Z,1478844229.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:49.142Z,1478844229.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:49.517Z,1478844229.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:49.553Z,1478844229.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:49.913Z,1478844229.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:49.949Z,1478844229.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:50.313Z,1478844230.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:50.340Z,1478844230.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:50.713Z,1478844230.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:50.753Z,1478844230.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:51.117Z,1478844231.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:51.157Z,1478844231.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:51.513Z,1478844231.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:51.533Z,1478844231.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:51.924Z,1478844231.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:51.966Z,1478844231.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:52.321Z,1478844232.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:52.373Z,1478844232.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:52.721Z,1478844232.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:52.789Z,1478844232.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:53.122Z,1478844233.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:53.137Z,1478844233.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:53.521Z,1478844233.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:53.577Z,1478844233.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:53.917Z,1478844233.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:53.948Z,1478844233.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:54.321Z,1478844234.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:54.377Z,1478844234.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:54.721Z,1478844234.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:54.773Z,1478844234.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:55.121Z,1478844235.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:55.141Z,1478844235.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:55.520Z,1478844235.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:55.536Z,1478844235.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:55.913Z,1478844235.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:55.949Z,1478844235.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:56.313Z,1478844236.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:56.350Z,1478844236.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:56.713Z,1478844236.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:56.740Z,1478844236.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:57.113Z,1478844237.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:57.150Z,1478844237.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:57.513Z,1478844237.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:57.552Z,1478844237.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:57.913Z,1478844237.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:57.936Z,1478844237.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:58.313Z,1478844238.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:58.356Z,1478844238.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:58.713Z,1478844238.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:58.756Z,1478844238.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:59.113Z,1478844239.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:59.128Z,1478844239.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:59.513Z,1478844239.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:59.549Z,1478844239.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:03:59.920Z,1478844239.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:03:59.941Z,1478844239.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:00.313Z,1478844240.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:00.338Z,1478844240.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:00.713Z,1478844240.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:00.746Z,1478844240.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:01.113Z,1478844241.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:01.138Z,1478844241.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:01.513Z,1478844241.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:01.545Z,1478844241.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:01.913Z,1478844241.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:01.952Z,1478844241.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:02.313Z,1478844242.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:02.345Z,1478844242.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:02.713Z,1478844242.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:02.738Z,1478844242.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:03.113Z,1478844243.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:03.146Z,1478844243.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:03.513Z,1478844243.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:03.538Z,1478844243.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:03.913Z,1478844243.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:03.939Z,1478844243.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:04.321Z,1478844244.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:04.355Z,1478844244.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:04.713Z,1478844244.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:04.745Z,1478844244.745 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:04.745Z,1478844244.745 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2016-11-11T06:04:04.745Z,1478844244.745 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:04:04.751Z,1478844244.751 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:04.751Z,1478844244.751 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2016-11-11T06:04:04.751Z,1478844244.751 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:04:04.766Z,1478844244.766 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:04:04.766Z,1478844244.766 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:04:05.113Z,1478844245.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:05.156Z,1478844245.156 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T06:04:05.156Z,1478844245.156 [Default:CheckIn:C.Wait] Stopped
2016-11-11T06:04:05.156Z,1478844245.156 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T06:04:05.156Z,1478844245.156 [Default:CheckIn:D] Running Loop=1
2016-11-11T06:04:05.168Z,1478844245.168 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:04:05.168Z,1478844245.168 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2016-11-11T06:04:05.168Z,1478844245.168 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:04:05.169Z,1478844245.168 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2016-11-11T06:04:05.513Z,1478844245.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:05.555Z,1478844245.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:04:05.556Z,1478844245.556 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:04:05.556Z,1478844245.556 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:04:05.561Z,1478844245.561 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:04:05.561Z,1478844245.561 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:04:05.562Z,1478844245.562 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:04:05.565Z,1478844245.565 [Default:CheckIn:D] Stopped
2016-11-11T06:04:05.565Z,1478844245.565 [Default:CheckIn:E] Running Loop=1
2016-11-11T06:04:05.920Z,1478844245.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:05.951Z,1478844245.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:04:05.952Z,1478844245.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:05.973Z,1478844245.973 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 74.070915 min 
2016-11-11T06:04:05.974Z,1478844245.974 [Default:CheckIn:E] Stopped
2016-11-11T06:04:05.974Z,1478844245.974 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T06:04:05.974Z,1478844245.974 [Default:CheckIn] Stopped
2016-11-11T06:04:05.974Z,1478844245.974 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T06:04:05.974Z,1478844245.974 [Default:CheckIn](INFO): Running loop #8
2016-11-11T06:04:05.974Z,1478844245.974 [Default:CheckIn] Running Loop=8
2016-11-11T06:04:05.974Z,1478844245.974 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T06:04:05.975Z,1478844245.974 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T06:04:06.322Z,1478844246.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:06.337Z,1478844246.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:04:06.338Z,1478844246.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:09.732Z,1478844249.732 [NAL9602](INFO): Powering up
2016-11-11T06:04:09.764Z,1478844249.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:09.860Z,1478844249.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2016-11-11T06:04:09.862Z,1478844249.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:09.869Z,1478844249.869 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:09.869Z,1478844249.869 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 6
2016-11-11T06:04:09.869Z,1478844249.869 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:04:09.883Z,1478844249.883 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:04:09.974Z,1478844249.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:10.019Z,1478844250.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2016-11-11T06:04:10.020Z,1478844250.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:10.055Z,1478844250.055 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:04:10.055Z,1478844250.055 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 6
2016-11-11T06:04:10.321Z,1478844250.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:10.340Z,1478844250.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T06:04:10.341Z,1478844250.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:10.347Z,1478844250.347 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:04:10.348Z,1478844250.348 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:04:10.348Z,1478844250.348 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:04:10.721Z,1478844250.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:10.777Z,1478844250.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T06:04:10.778Z,1478844250.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:11.121Z,1478844251.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:11.136Z,1478844251.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T06:04:11.137Z,1478844251.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:11.513Z,1478844251.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:11.561Z,1478844251.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T06:04:11.562Z,1478844251.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:11.913Z,1478844251.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:11.951Z,1478844251.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T06:04:11.952Z,1478844251.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:12.312Z,1478844252.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:12.369Z,1478844252.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T06:04:12.370Z,1478844252.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:12.713Z,1478844252.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:12.748Z,1478844252.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T06:04:12.749Z,1478844252.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:13.113Z,1478844253.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:13.148Z,1478844253.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T06:04:13.149Z,1478844253.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:13.513Z,1478844253.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:13.548Z,1478844253.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T06:04:13.549Z,1478844253.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:13.913Z,1478844253.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:13.948Z,1478844253.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T06:04:13.949Z,1478844253.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:14.313Z,1478844254.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:14.348Z,1478844254.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T06:04:14.349Z,1478844254.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:14.713Z,1478844254.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:14.736Z,1478844254.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T06:04:14.737Z,1478844254.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:15.113Z,1478844255.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:15.156Z,1478844255.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T06:04:15.157Z,1478844255.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:15.513Z,1478844255.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:15.555Z,1478844255.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T06:04:15.557Z,1478844255.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:15.913Z,1478844255.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:15.928Z,1478844255.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T06:04:15.929Z,1478844255.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:16.313Z,1478844256.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:16.349Z,1478844256.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T06:04:16.350Z,1478844256.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:16.724Z,1478844256.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:16.739Z,1478844256.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T06:04:16.740Z,1478844256.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:17.121Z,1478844257.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:17.136Z,1478844257.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T06:04:17.137Z,1478844257.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:17.513Z,1478844257.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:17.546Z,1478844257.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T06:04:17.547Z,1478844257.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:17.913Z,1478844257.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:17.945Z,1478844257.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T06:04:17.946Z,1478844257.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:18.313Z,1478844258.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:18.340Z,1478844258.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T06:04:18.341Z,1478844258.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:18.713Z,1478844258.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:18.746Z,1478844258.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T06:04:18.747Z,1478844258.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:19.113Z,1478844259.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:19.138Z,1478844259.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T06:04:19.139Z,1478844259.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:19.513Z,1478844259.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:19.545Z,1478844259.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T06:04:19.546Z,1478844259.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:19.913Z,1478844259.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:19.944Z,1478844259.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T06:04:19.945Z,1478844259.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:20.335Z,1478844260.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:20.350Z,1478844260.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T06:04:20.352Z,1478844260.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:20.697Z,1478844260.697 [NAL9602](INFO): NAL9602 initialized
2016-11-11T06:04:20.714Z,1478844260.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:20.752Z,1478844260.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T06:04:20.753Z,1478844260.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:21.113Z,1478844261.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:21.148Z,1478844261.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T06:04:21.149Z,1478844261.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:21.497Z,1478844261.497 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T06:04:21.497Z,1478844261.497 [NAL9602] Data Fault, FailCount= 1
2016-11-11T06:04:21.497Z,1478844261.497 [NAL9602](ERROR): Data Fault
2016-11-11T06:04:21.514Z,1478844261.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:21.541Z,1478844261.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T06:04:21.542Z,1478844261.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:21.582Z,1478844261.582 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T06:04:21.905Z,1478844261.905 [NAL9602](INFO): Powering down
2016-11-11T06:04:21.922Z,1478844261.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:21.946Z,1478844261.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T06:04:21.947Z,1478844261.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:22.313Z,1478844262.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:22.341Z,1478844262.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T06:04:22.342Z,1478844262.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:22.719Z,1478844262.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:22.738Z,1478844262.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T06:04:22.739Z,1478844262.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:22.771Z,1478844262.771 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T06:04:22.771Z,1478844262.771 [NAL9602] No Fault, FailCount= 1
2016-11-11T06:04:23.120Z,1478844263.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:23.135Z,1478844263.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T06:04:23.136Z,1478844263.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:23.528Z,1478844263.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:23.545Z,1478844263.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T06:04:23.546Z,1478844263.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:23.920Z,1478844263.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:23.989Z,1478844263.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T06:04:23.990Z,1478844263.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:24.313Z,1478844264.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:24.373Z,1478844264.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T06:04:24.374Z,1478844264.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:24.713Z,1478844264.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:24.749Z,1478844264.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:25.133Z,1478844265.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:25.192Z,1478844265.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:25.517Z,1478844265.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:25.542Z,1478844265.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:25.913Z,1478844265.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:25.965Z,1478844265.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:26.312Z,1478844266.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:26.357Z,1478844266.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:26.713Z,1478844266.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:26.748Z,1478844266.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:27.097Z,1478844267.096 [NAL9602](INFO): Powering up NAL9602
2016-11-11T06:04:27.113Z,1478844267.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:27.153Z,1478844267.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:27.517Z,1478844267.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:27.537Z,1478844267.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:27.919Z,1478844267.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:27.934Z,1478844267.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:27.975Z,1478844267.975 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T06:04:27.975Z,1478844267.975 [Rowe_600LCM] No Fault, FailCount= 5
2016-11-11T06:04:27.984Z,1478844267.984 [Rowe_600LCM](INFO): Initializing
2016-11-11T06:04:27.984Z,1478844267.984 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T06:04:27.984Z,1478844267.984 [Rowe_600LCM](INFO): LCM OK
2016-11-11T06:04:27.984Z,1478844267.984 [Rowe_600LCM](INFO): Powering up
2016-11-11T06:04:28.321Z,1478844268.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:28.357Z,1478844268.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:28.725Z,1478844268.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:28.745Z,1478844268.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:29.120Z,1478844269.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:29.136Z,1478844269.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:29.520Z,1478844269.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:29.535Z,1478844269.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:29.929Z,1478844269.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:29.949Z,1478844269.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:30.320Z,1478844270.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:30.336Z,1478844270.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:30.722Z,1478844270.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:30.745Z,1478844270.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:31.120Z,1478844271.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:31.142Z,1478844271.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:31.513Z,1478844271.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:31.545Z,1478844271.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:31.914Z,1478844271.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:31.950Z,1478844271.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:32.109Z,1478844272.109 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T06:04:32.178Z,1478844272.178 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T06:04:32.180Z,1478844272.180 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T06:04:32.182Z,1478844272.182 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T06:04:32.184Z,1478844272.184 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T06:04:32.317Z,1478844272.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:32.354Z,1478844272.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:32.733Z,1478844272.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:32.769Z,1478844272.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:33.122Z,1478844273.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:33.158Z,1478844273.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:33.521Z,1478844273.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:33.541Z,1478844273.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:33.920Z,1478844273.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:33.936Z,1478844273.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:34.324Z,1478844274.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:34.340Z,1478844274.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:34.728Z,1478844274.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:34.749Z,1478844274.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:35.128Z,1478844275.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:35.145Z,1478844275.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:35.513Z,1478844275.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:35.540Z,1478844275.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:35.924Z,1478844275.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:35.951Z,1478844275.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:36.313Z,1478844276.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:36.346Z,1478844276.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:36.713Z,1478844276.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:36.748Z,1478844276.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:37.113Z,1478844277.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:37.145Z,1478844277.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:37.513Z,1478844277.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:37.541Z,1478844277.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:37.928Z,1478844277.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:37.954Z,1478844277.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:38.301Z,1478844278.301 [NAL9602](INFO): NAL9602 initialized
2016-11-11T06:04:38.317Z,1478844278.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:38.373Z,1478844278.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:38.714Z,1478844278.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:38.773Z,1478844278.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:39.124Z,1478844279.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:39.152Z,1478844279.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:39.528Z,1478844279.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:39.573Z,1478844279.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:39.928Z,1478844279.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:39.959Z,1478844279.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:40.325Z,1478844280.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:40.381Z,1478844280.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:40.719Z,1478844280.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:40.769Z,1478844280.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:41.126Z,1478844281.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:41.143Z,1478844281.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:41.528Z,1478844281.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:41.553Z,1478844281.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:41.930Z,1478844281.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:41.946Z,1478844281.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:42.328Z,1478844282.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:42.348Z,1478844282.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:42.713Z,1478844282.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:42.745Z,1478844282.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:43.113Z,1478844283.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:43.147Z,1478844283.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:43.514Z,1478844283.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:43.540Z,1478844283.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:43.924Z,1478844283.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:43.943Z,1478844283.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:44.325Z,1478844284.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:44.346Z,1478844284.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:44.713Z,1478844284.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:44.740Z,1478844284.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:45.113Z,1478844285.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:45.145Z,1478844285.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:45.535Z,1478844285.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:45.550Z,1478844285.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:45.944Z,1478844285.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:45.993Z,1478844285.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:46.313Z,1478844286.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:46.349Z,1478844286.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:46.713Z,1478844286.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:46.748Z,1478844286.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:47.114Z,1478844287.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:47.141Z,1478844287.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:47.528Z,1478844287.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:47.565Z,1478844287.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:47.924Z,1478844287.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:47.961Z,1478844287.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:48.321Z,1478844288.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:48.357Z,1478844288.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:48.721Z,1478844288.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:48.741Z,1478844288.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:49.120Z,1478844289.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:49.135Z,1478844289.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:49.520Z,1478844289.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:49.536Z,1478844289.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:49.916Z,1478844289.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:49.949Z,1478844289.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:50.320Z,1478844290.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:50.336Z,1478844290.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:50.721Z,1478844290.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:50.737Z,1478844290.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:51.129Z,1478844291.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:51.149Z,1478844291.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:51.513Z,1478844291.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:51.545Z,1478844291.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:51.913Z,1478844291.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:51.945Z,1478844291.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:52.313Z,1478844292.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:52.345Z,1478844292.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:52.713Z,1478844292.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:52.757Z,1478844292.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:53.113Z,1478844293.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:53.173Z,1478844293.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:53.513Z,1478844293.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:53.545Z,1478844293.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:53.913Z,1478844293.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:53.945Z,1478844293.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:54.322Z,1478844294.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:54.381Z,1478844294.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:54.714Z,1478844294.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:54.745Z,1478844294.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:55.113Z,1478844295.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:55.166Z,1478844295.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:55.513Z,1478844295.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:55.553Z,1478844295.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:55.914Z,1478844295.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:55.964Z,1478844295.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:56.328Z,1478844296.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:56.359Z,1478844296.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:56.717Z,1478844296.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:56.737Z,1478844296.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:57.125Z,1478844297.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:57.145Z,1478844297.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:57.521Z,1478844297.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:57.549Z,1478844297.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:57.922Z,1478844297.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:57.941Z,1478844297.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:58.317Z,1478844298.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:58.339Z,1478844298.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:58.720Z,1478844298.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:58.735Z,1478844298.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:59.124Z,1478844299.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:59.152Z,1478844299.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:59.517Z,1478844299.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:59.539Z,1478844299.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:04:59.929Z,1478844299.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:04:59.981Z,1478844299.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:00.326Z,1478844300.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:00.348Z,1478844300.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:00.721Z,1478844300.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:00.743Z,1478844300.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:01.113Z,1478844301.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:01.144Z,1478844301.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:01.514Z,1478844301.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:01.553Z,1478844301.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:01.914Z,1478844301.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:01.941Z,1478844301.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:02.319Z,1478844302.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:02.342Z,1478844302.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:02.724Z,1478844302.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:02.745Z,1478844302.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:03.124Z,1478844303.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:03.144Z,1478844303.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:03.513Z,1478844303.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:03.548Z,1478844303.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:03.914Z,1478844303.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:03.953Z,1478844303.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:04.321Z,1478844304.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:04.344Z,1478844304.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:04.713Z,1478844304.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:04.748Z,1478844304.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:05.113Z,1478844305.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:05.153Z,1478844305.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:05.514Z,1478844305.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:05.529Z,1478844305.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:05.913Z,1478844305.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:05.928Z,1478844305.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:06.319Z,1478844306.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:06.334Z,1478844306.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:09.685Z,1478844309.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:09.769Z,1478844309.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:09.910Z,1478844309.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:09.945Z,1478844309.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:10.262Z,1478844310.262 [NAL9602](INFO): SBD MO Status=2, MOMSN=339, MT Status=2, MTMSN=0
2016-11-11T06:05:10.263Z,1478844310.263 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T06:05:10.279Z,1478844310.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:10.328Z,1478844310.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:10.698Z,1478844310.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:10.752Z,1478844310.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:11.077Z,1478844311.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:11.114Z,1478844311.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:11.477Z,1478844311.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:11.552Z,1478844311.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:11.877Z,1478844311.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:11.933Z,1478844311.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:12.281Z,1478844312.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:12.317Z,1478844312.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:12.682Z,1478844312.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:12.714Z,1478844312.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:13.077Z,1478844313.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:13.114Z,1478844313.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:13.482Z,1478844313.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:13.521Z,1478844313.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:13.891Z,1478844313.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:13.945Z,1478844313.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:14.281Z,1478844314.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:14.309Z,1478844314.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:14.692Z,1478844314.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:14.723Z,1478844314.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:15.085Z,1478844315.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:15.105Z,1478844315.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:15.482Z,1478844315.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:15.498Z,1478844315.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:15.884Z,1478844315.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:15.900Z,1478844315.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:16.286Z,1478844316.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:16.301Z,1478844316.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:16.684Z,1478844316.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:16.708Z,1478844316.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:17.085Z,1478844317.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:17.101Z,1478844317.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:17.494Z,1478844317.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:17.508Z,1478844317.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:17.880Z,1478844317.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:17.913Z,1478844317.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:18.278Z,1478844318.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:18.313Z,1478844318.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:18.682Z,1478844318.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:18.719Z,1478844318.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:19.077Z,1478844319.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:19.103Z,1478844319.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:19.485Z,1478844319.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:19.513Z,1478844319.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:19.886Z,1478844319.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:19.925Z,1478844319.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:20.278Z,1478844320.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:20.301Z,1478844320.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:20.677Z,1478844320.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:20.717Z,1478844320.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:21.062Z,1478844321.062 [NAL9602](INFO): SBD MO Status=0, MOMSN=339, MT Status=0, MTMSN=0
2016-11-11T06:05:21.062Z,1478844321.062 [NAL9602](INFO): No messages in MT queue
2016-11-11T06:05:21.079Z,1478844321.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:21.094Z,1478844321.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:21.482Z,1478844321.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:21.502Z,1478844321.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:21.888Z,1478844321.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:21.903Z,1478844321.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:22.292Z,1478844322.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:22.317Z,1478844322.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:22.690Z,1478844322.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:22.714Z,1478844322.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:23.081Z,1478844323.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:23.113Z,1478844323.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:23.482Z,1478844323.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:23.508Z,1478844323.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:23.877Z,1478844323.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:23.929Z,1478844323.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:24.300Z,1478844324.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:24.346Z,1478844324.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:24.704Z,1478844324.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:24.723Z,1478844324.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:25.088Z,1478844325.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:25.121Z,1478844325.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:25.477Z,1478844325.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:25.525Z,1478844325.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:25.877Z,1478844325.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:25.914Z,1478844325.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:26.278Z,1478844326.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:26.318Z,1478844326.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:26.677Z,1478844326.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:26.713Z,1478844326.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:27.104Z,1478844327.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:27.159Z,1478844327.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:27.500Z,1478844327.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:27.518Z,1478844327.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:27.905Z,1478844327.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:27.925Z,1478844327.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:28.279Z,1478844328.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:28.302Z,1478844328.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:28.680Z,1478844328.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:28.709Z,1478844328.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:29.083Z,1478844329.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:29.098Z,1478844329.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:29.491Z,1478844329.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:29.510Z,1478844329.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:29.877Z,1478844329.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:29.902Z,1478844329.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:30.302Z,1478844330.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:30.317Z,1478844330.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:30.703Z,1478844330.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:30.718Z,1478844330.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:31.095Z,1478844331.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:31.111Z,1478844331.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:31.477Z,1478844331.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:31.513Z,1478844331.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:31.878Z,1478844331.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:31.909Z,1478844331.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:32.287Z,1478844332.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:32.310Z,1478844332.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:32.677Z,1478844332.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:32.692Z,1478844332.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:33.111Z,1478844333.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:33.126Z,1478844333.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:33.492Z,1478844333.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:33.522Z,1478844333.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:33.888Z,1478844333.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:33.903Z,1478844333.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:34.286Z,1478844334.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:34.301Z,1478844334.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:34.680Z,1478844334.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:34.704Z,1478844334.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:35.085Z,1478844335.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:35.105Z,1478844335.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:35.491Z,1478844335.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:35.506Z,1478844335.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:35.886Z,1478844335.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:35.901Z,1478844335.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:36.297Z,1478844336.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:36.313Z,1478844336.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:36.701Z,1478844336.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:36.728Z,1478844336.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:37.099Z,1478844337.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:37.116Z,1478844337.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:37.477Z,1478844337.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:37.508Z,1478844337.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:37.886Z,1478844337.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:37.922Z,1478844337.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:38.282Z,1478844338.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:38.306Z,1478844338.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:38.681Z,1478844338.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:38.737Z,1478844338.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:39.088Z,1478844339.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:39.137Z,1478844339.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:39.500Z,1478844339.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:39.526Z,1478844339.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:39.888Z,1478844339.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:39.903Z,1478844339.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:40.281Z,1478844340.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:40.336Z,1478844340.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:40.685Z,1478844340.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:40.700Z,1478844340.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:41.083Z,1478844341.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:41.136Z,1478844341.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:41.486Z,1478844341.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:41.541Z,1478844341.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:41.883Z,1478844341.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:41.898Z,1478844341.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:42.295Z,1478844342.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:42.310Z,1478844342.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:42.703Z,1478844342.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:42.719Z,1478844342.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:43.101Z,1478844343.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:43.116Z,1478844343.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:43.481Z,1478844343.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:43.513Z,1478844343.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:43.882Z,1478844343.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:43.908Z,1478844343.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:44.278Z,1478844344.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:44.309Z,1478844344.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:44.677Z,1478844344.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:44.709Z,1478844344.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:45.100Z,1478844345.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:45.128Z,1478844345.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:45.512Z,1478844345.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:45.535Z,1478844345.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:45.888Z,1478844345.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:45.915Z,1478844345.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:46.286Z,1478844346.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:46.317Z,1478844346.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:46.682Z,1478844346.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:46.717Z,1478844346.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:47.077Z,1478844347.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:47.093Z,1478844347.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:47.145Z,1478844347.145 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T06:05:47.483Z,1478844347.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:47.511Z,1478844347.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:47.885Z,1478844347.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:47.905Z,1478844347.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:48.296Z,1478844348.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:48.312Z,1478844348.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:48.697Z,1478844348.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:48.725Z,1478844348.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:49.097Z,1478844349.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:49.112Z,1478844349.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:49.481Z,1478844349.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:49.521Z,1478844349.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:49.877Z,1478844349.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:49.913Z,1478844349.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:50.286Z,1478844350.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:50.314Z,1478844350.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:50.681Z,1478844350.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:50.702Z,1478844350.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:51.092Z,1478844351.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:51.122Z,1478844351.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:51.492Z,1478844351.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:51.508Z,1478844351.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:51.888Z,1478844351.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:51.904Z,1478844351.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:52.289Z,1478844352.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:52.309Z,1478844352.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:52.680Z,1478844352.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:52.708Z,1478844352.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:53.084Z,1478844353.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:53.100Z,1478844353.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:53.484Z,1478844353.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:53.538Z,1478844353.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:53.876Z,1478844353.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:53.929Z,1478844353.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:54.295Z,1478844354.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:54.310Z,1478844354.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:54.700Z,1478844354.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:54.715Z,1478844354.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:55.088Z,1478844355.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:55.155Z,1478844355.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:55.477Z,1478844355.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:55.504Z,1478844355.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:55.877Z,1478844355.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:55.930Z,1478844355.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:56.286Z,1478844356.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:56.341Z,1478844356.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:56.677Z,1478844356.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:56.717Z,1478844356.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:57.091Z,1478844357.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:57.126Z,1478844357.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:57.492Z,1478844357.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:57.520Z,1478844357.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:57.888Z,1478844357.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:57.916Z,1478844357.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:58.289Z,1478844358.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:58.324Z,1478844358.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:58.682Z,1478844358.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:58.698Z,1478844358.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:59.080Z,1478844359.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:59.096Z,1478844359.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:59.486Z,1478844359.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:59.501Z,1478844359.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:05:59.881Z,1478844359.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:05:59.904Z,1478844359.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:00.288Z,1478844360.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:00.313Z,1478844360.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:00.694Z,1478844360.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:00.713Z,1478844360.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:01.095Z,1478844361.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:01.110Z,1478844361.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:01.477Z,1478844361.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:01.509Z,1478844361.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:01.877Z,1478844361.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:01.917Z,1478844361.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:02.287Z,1478844362.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:02.318Z,1478844362.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:02.677Z,1478844362.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:02.717Z,1478844362.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:03.092Z,1478844363.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:03.129Z,1478844363.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:03.500Z,1478844363.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:03.524Z,1478844363.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:03.909Z,1478844363.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:03.925Z,1478844363.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:04.293Z,1478844364.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:04.325Z,1478844364.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:04.681Z,1478844364.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:04.701Z,1478844364.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:05.085Z,1478844365.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:05.100Z,1478844365.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:05.484Z,1478844365.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:05.501Z,1478844365.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:05.877Z,1478844365.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:05.902Z,1478844365.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:06.301Z,1478844366.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:06.324Z,1478844366.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:06.701Z,1478844366.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:06.716Z,1478844366.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:10.120Z,1478844370.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:10.205Z,1478844370.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:10.314Z,1478844370.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:10.353Z,1478844370.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:10.673Z,1478844370.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:10.693Z,1478844370.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:11.077Z,1478844371.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:11.125Z,1478844371.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:11.474Z,1478844371.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:11.489Z,1478844371.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:11.881Z,1478844371.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:11.933Z,1478844371.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:12.284Z,1478844372.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:12.325Z,1478844372.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:12.688Z,1478844372.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:12.715Z,1478844372.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:13.092Z,1478844373.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:13.127Z,1478844373.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:13.477Z,1478844373.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:13.498Z,1478844373.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:13.880Z,1478844373.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:13.895Z,1478844373.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:14.292Z,1478844374.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:14.307Z,1478844374.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:14.677Z,1478844374.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:14.699Z,1478844374.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:15.090Z,1478844375.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:15.106Z,1478844375.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:15.499Z,1478844375.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:15.514Z,1478844375.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:15.891Z,1478844375.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:15.906Z,1478844375.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:16.281Z,1478844376.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:16.317Z,1478844376.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:16.674Z,1478844376.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:16.697Z,1478844376.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:17.073Z,1478844377.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:17.117Z,1478844377.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:17.474Z,1478844377.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:17.490Z,1478844377.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:17.873Z,1478844377.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:17.917Z,1478844377.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:18.289Z,1478844378.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:18.309Z,1478844378.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:18.689Z,1478844378.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:18.709Z,1478844378.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:19.091Z,1478844379.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:19.106Z,1478844379.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:19.481Z,1478844379.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:19.503Z,1478844379.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:19.889Z,1478844379.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:19.904Z,1478844379.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:20.275Z,1478844380.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:20.313Z,1478844380.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:20.673Z,1478844380.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:20.706Z,1478844380.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:21.095Z,1478844381.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:21.111Z,1478844381.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:21.504Z,1478844381.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:21.520Z,1478844381.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:21.899Z,1478844381.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:21.915Z,1478844381.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:22.277Z,1478844382.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:22.305Z,1478844382.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:22.682Z,1478844382.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:22.713Z,1478844382.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:23.077Z,1478844383.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:23.097Z,1478844383.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:23.486Z,1478844383.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:23.502Z,1478844383.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:23.885Z,1478844383.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:23.905Z,1478844383.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:24.288Z,1478844384.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:24.361Z,1478844384.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:24.696Z,1478844384.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:24.712Z,1478844384.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:25.099Z,1478844385.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:25.118Z,1478844385.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:25.473Z,1478844385.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:25.521Z,1478844385.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:25.877Z,1478844385.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:25.913Z,1478844385.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:26.275Z,1478844386.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:26.325Z,1478844386.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:26.678Z,1478844386.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:26.725Z,1478844386.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:27.084Z,1478844387.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:27.111Z,1478844387.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:27.489Z,1478844387.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:27.512Z,1478844387.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:27.885Z,1478844387.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:27.905Z,1478844387.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:28.280Z,1478844388.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:28.296Z,1478844388.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:28.682Z,1478844388.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:28.711Z,1478844388.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:29.079Z,1478844389.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:29.096Z,1478844389.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:29.482Z,1478844389.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:29.498Z,1478844389.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:29.882Z,1478844389.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:29.898Z,1478844389.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:30.296Z,1478844390.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:30.317Z,1478844390.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:30.695Z,1478844390.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:30.711Z,1478844390.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:31.096Z,1478844391.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:31.114Z,1478844391.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:31.473Z,1478844391.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:31.509Z,1478844391.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:31.873Z,1478844391.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:31.905Z,1478844391.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:32.283Z,1478844392.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:32.314Z,1478844392.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:32.673Z,1478844392.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:32.688Z,1478844392.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:33.083Z,1478844393.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:33.110Z,1478844393.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:33.488Z,1478844393.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:33.521Z,1478844393.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:33.884Z,1478844393.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:33.925Z,1478844393.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:34.285Z,1478844394.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:34.326Z,1478844394.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:34.677Z,1478844394.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:34.697Z,1478844394.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:35.079Z,1478844395.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:35.095Z,1478844395.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:35.481Z,1478844395.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:35.497Z,1478844395.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:35.881Z,1478844395.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:35.901Z,1478844395.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:36.286Z,1478844396.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:36.310Z,1478844396.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:36.694Z,1478844396.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:36.713Z,1478844396.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:37.096Z,1478844397.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:37.114Z,1478844397.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:37.489Z,1478844397.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:37.509Z,1478844397.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:37.873Z,1478844397.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:37.905Z,1478844397.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:38.283Z,1478844398.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:38.319Z,1478844398.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:38.672Z,1478844398.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:38.737Z,1478844398.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:39.084Z,1478844399.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:39.111Z,1478844399.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:39.488Z,1478844399.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:39.513Z,1478844399.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:39.884Z,1478844399.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:39.918Z,1478844399.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:40.281Z,1478844400.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:40.317Z,1478844400.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:40.681Z,1478844400.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:40.695Z,1478844400.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:41.077Z,1478844401.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:41.097Z,1478844401.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:41.480Z,1478844401.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:41.495Z,1478844401.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:41.888Z,1478844401.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:41.896Z,1478844401.896 [BPC1](ERROR): Failed to receive battery data
2016-11-11T06:06:41.896Z,1478844401.896 [BPC1] Communications Fault, FailCount= 1
2016-11-11T06:06:41.896Z,1478844401.896 [BPC1](ERROR): Communications Fault
2016-11-11T06:06:41.909Z,1478844401.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:41.961Z,1478844401.961 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T06:06:42.300Z,1478844402.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:42.319Z,1478844402.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:42.691Z,1478844402.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:42.706Z,1478844402.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:43.073Z,1478844403.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:43.106Z,1478844403.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:43.125Z,1478844403.125 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:06:43.125Z,1478844403.125 [BPC1] No Fault, FailCount= 1
2016-11-11T06:06:43.475Z,1478844403.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:43.562Z,1478844403.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:43.881Z,1478844403.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:43.906Z,1478844403.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:44.300Z,1478844404.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:44.329Z,1478844404.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:44.696Z,1478844404.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:44.711Z,1478844404.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:45.084Z,1478844405.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:45.110Z,1478844405.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:45.473Z,1478844405.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:45.493Z,1478844405.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:45.873Z,1478844405.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:45.893Z,1478844405.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:46.275Z,1478844406.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:46.305Z,1478844406.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:46.680Z,1478844406.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:46.706Z,1478844406.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:47.088Z,1478844407.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:47.104Z,1478844407.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:47.489Z,1478844407.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:47.541Z,1478844407.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:47.890Z,1478844407.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:47.909Z,1478844407.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:48.284Z,1478844408.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:48.300Z,1478844408.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:48.673Z,1478844408.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:48.705Z,1478844408.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:49.073Z,1478844409.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:49.108Z,1478844409.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:49.486Z,1478844409.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:49.502Z,1478844409.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:49.873Z,1478844409.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:49.910Z,1478844409.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:50.283Z,1478844410.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:50.321Z,1478844410.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:50.699Z,1478844410.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:50.715Z,1478844410.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:51.084Z,1478844411.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:51.111Z,1478844411.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:51.474Z,1478844411.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:51.517Z,1478844411.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:51.882Z,1478844411.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:51.913Z,1478844411.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:52.274Z,1478844412.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:52.290Z,1478844412.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:52.673Z,1478844412.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:52.693Z,1478844412.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:53.084Z,1478844413.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:53.100Z,1478844413.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:53.488Z,1478844413.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:53.503Z,1478844413.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:53.888Z,1478844413.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:53.909Z,1478844413.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:54.281Z,1478844414.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:54.317Z,1478844414.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:54.673Z,1478844414.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:54.709Z,1478844414.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:55.077Z,1478844415.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:55.097Z,1478844415.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:55.482Z,1478844415.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:55.497Z,1478844415.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:55.881Z,1478844415.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:55.901Z,1478844415.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:56.284Z,1478844416.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:56.305Z,1478844416.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:56.754Z,1478844416.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:56.781Z,1478844416.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:57.084Z,1478844417.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:57.123Z,1478844417.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:57.481Z,1478844417.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:57.501Z,1478844417.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:57.885Z,1478844417.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:57.905Z,1478844417.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:58.281Z,1478844418.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:58.301Z,1478844418.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:58.676Z,1478844418.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:58.732Z,1478844418.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:59.094Z,1478844419.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:59.109Z,1478844419.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:59.494Z,1478844419.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:59.509Z,1478844419.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:06:59.892Z,1478844419.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:06:59.950Z,1478844419.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:00.288Z,1478844420.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:00.304Z,1478844420.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:00.673Z,1478844420.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:00.729Z,1478844420.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:01.073Z,1478844421.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:01.126Z,1478844421.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:01.479Z,1478844421.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:01.505Z,1478844421.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:01.873Z,1478844421.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:01.904Z,1478844421.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:02.300Z,1478844422.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:02.332Z,1478844422.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:02.700Z,1478844422.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:02.715Z,1478844422.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:03.084Z,1478844423.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:03.111Z,1478844423.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:03.482Z,1478844423.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:03.497Z,1478844423.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:03.880Z,1478844423.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:03.908Z,1478844423.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:04.287Z,1478844424.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:04.302Z,1478844424.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:04.681Z,1478844424.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:04.708Z,1478844424.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:05.091Z,1478844425.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:05.106Z,1478844425.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:05.495Z,1478844425.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:05.510Z,1478844425.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:05.897Z,1478844425.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:05.925Z,1478844425.925 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:05.925Z,1478844425.925 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2016-11-11T06:07:05.925Z,1478844425.925 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:07:05.982Z,1478844425.982 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:05.982Z,1478844425.982 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2016-11-11T06:07:05.982Z,1478844425.982 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:07:06.022Z,1478844426.022 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:07:06.022Z,1478844426.022 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:07:06.273Z,1478844426.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:06.345Z,1478844426.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:07:06.345Z,1478844426.345 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2016-11-11T06:07:06.346Z,1478844426.346 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:07:06.346Z,1478844426.346 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2016-11-11T06:07:06.673Z,1478844426.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:06.692Z,1478844426.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:07:06.692Z,1478844426.692 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:07:06.693Z,1478844426.693 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:07:06.714Z,1478844426.714 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:07:06.714Z,1478844426.714 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:07:06.715Z,1478844426.715 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:07:07.074Z,1478844427.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:07.110Z,1478844427.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:10.680Z,1478844430.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:10.696Z,1478844430.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:10.703Z,1478844430.703 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:10.703Z,1478844430.703 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 7
2016-11-11T06:07:10.703Z,1478844430.703 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:07:10.717Z,1478844430.717 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:07:10.799Z,1478844430.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:10.831Z,1478844430.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:10.866Z,1478844430.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:07:10.867Z,1478844430.866 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 7
2016-11-11T06:07:11.189Z,1478844431.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:11.204Z,1478844431.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:11.209Z,1478844431.210 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:07:11.210Z,1478844431.210 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:07:11.210Z,1478844431.210 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:07:11.633Z,1478844431.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:11.683Z,1478844431.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:11.980Z,1478844431.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:12.037Z,1478844432.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:12.378Z,1478844432.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:12.393Z,1478844432.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:12.798Z,1478844432.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:12.842Z,1478844432.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:13.174Z,1478844433.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:13.193Z,1478844433.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:13.577Z,1478844433.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:13.625Z,1478844433.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:13.978Z,1478844433.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:14.029Z,1478844434.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:14.383Z,1478844434.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:14.413Z,1478844434.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:14.791Z,1478844434.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:14.841Z,1478844434.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:15.192Z,1478844435.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:15.248Z,1478844435.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:15.569Z,1478844435.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:15.652Z,1478844435.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:15.969Z,1478844435.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:15.984Z,1478844435.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:16.382Z,1478844436.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:16.398Z,1478844436.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:16.776Z,1478844436.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:16.790Z,1478844436.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:17.180Z,1478844437.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:17.201Z,1478844437.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:17.593Z,1478844437.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:17.677Z,1478844437.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:17.987Z,1478844437.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:18.003Z,1478844438.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:18.369Z,1478844438.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:18.389Z,1478844438.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:18.777Z,1478844438.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:18.792Z,1478844438.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:19.178Z,1478844439.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:19.193Z,1478844439.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:19.575Z,1478844439.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:19.597Z,1478844439.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:19.991Z,1478844439.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:20.005Z,1478844440.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:20.388Z,1478844440.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:20.416Z,1478844440.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:20.788Z,1478844440.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:20.809Z,1478844440.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:21.169Z,1478844441.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:21.201Z,1478844441.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:21.569Z,1478844441.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:21.601Z,1478844441.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:22.006Z,1478844442.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:22.030Z,1478844442.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:22.379Z,1478844442.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:22.405Z,1478844442.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:22.769Z,1478844442.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:22.805Z,1478844442.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:23.184Z,1478844443.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:23.209Z,1478844443.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:23.584Z,1478844443.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:23.618Z,1478844443.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:24.004Z,1478844444.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:24.036Z,1478844444.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:24.377Z,1478844444.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:24.397Z,1478844444.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:24.777Z,1478844444.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:24.797Z,1478844444.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:25.177Z,1478844445.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:25.193Z,1478844445.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:25.597Z,1478844445.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:25.640Z,1478844445.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:25.988Z,1478844445.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:26.045Z,1478844446.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:26.391Z,1478844446.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:26.400Z,1478844446.400 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T06:07:26.400Z,1478844446.400 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:07:26.400Z,1478844446.400 [BPC1](ERROR): Data Fault
2016-11-11T06:07:26.408Z,1478844446.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:26.445Z,1478844446.445 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:07:26.787Z,1478844446.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:26.802Z,1478844446.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:27.169Z,1478844447.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:27.204Z,1478844447.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:27.585Z,1478844447.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:27.652Z,1478844447.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:27.702Z,1478844447.702 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:07:27.702Z,1478844447.702 [BPC1] No Fault, FailCount= 1
2016-11-11T06:07:27.969Z,1478844447.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:28.050Z,1478844448.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:28.379Z,1478844448.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:28.407Z,1478844448.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:28.769Z,1478844448.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:28.821Z,1478844448.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:29.179Z,1478844449.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:29.237Z,1478844449.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:29.600Z,1478844449.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:29.652Z,1478844449.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:29.980Z,1478844449.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:30.012Z,1478844450.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:30.377Z,1478844450.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:30.397Z,1478844450.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:30.776Z,1478844450.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:30.791Z,1478844450.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:31.172Z,1478844451.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:31.196Z,1478844451.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:31.600Z,1478844451.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:31.649Z,1478844451.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:31.991Z,1478844451.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:32.013Z,1478844452.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:32.391Z,1478844452.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:32.406Z,1478844452.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:32.787Z,1478844452.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:32.809Z,1478844452.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:33.170Z,1478844453.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:33.205Z,1478844453.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:33.569Z,1478844453.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:33.601Z,1478844453.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:33.969Z,1478844453.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:34.005Z,1478844454.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:34.375Z,1478844454.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:34.406Z,1478844454.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:34.769Z,1478844454.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:34.789Z,1478844454.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:35.179Z,1478844455.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:35.220Z,1478844455.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:35.584Z,1478844455.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:35.620Z,1478844455.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:35.989Z,1478844455.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:36.022Z,1478844456.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:36.373Z,1478844456.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:36.405Z,1478844456.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:36.774Z,1478844456.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:36.809Z,1478844456.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:37.175Z,1478844457.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:37.202Z,1478844457.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:37.569Z,1478844457.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:37.605Z,1478844457.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:37.989Z,1478844457.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:38.046Z,1478844458.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:38.384Z,1478844458.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:38.410Z,1478844458.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:38.780Z,1478844458.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:38.813Z,1478844458.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:39.174Z,1478844459.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:39.221Z,1478844459.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:39.613Z,1478844459.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:39.654Z,1478844459.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:39.969Z,1478844459.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:39.989Z,1478844459.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:40.374Z,1478844460.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:40.389Z,1478844460.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:40.773Z,1478844460.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:40.799Z,1478844460.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:41.179Z,1478844461.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:41.201Z,1478844461.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:41.624Z,1478844461.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:41.652Z,1478844461.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:41.982Z,1478844461.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:41.998Z,1478844461.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:42.380Z,1478844462.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:42.395Z,1478844462.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:42.777Z,1478844462.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:42.800Z,1478844462.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:43.178Z,1478844463.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:43.194Z,1478844463.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:43.588Z,1478844463.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:43.625Z,1478844463.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:43.996Z,1478844463.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:44.009Z,1478844464.009 [BPC1](ERROR): Failed to receive battery data
2016-11-11T06:07:44.009Z,1478844464.009 [BPC1] Communications Fault, FailCount= 2
2016-11-11T06:07:44.009Z,1478844464.009 [BPC1](ERROR): Communications Fault
2016-11-11T06:07:44.017Z,1478844464.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:44.066Z,1478844464.066 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T06:07:44.384Z,1478844464.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:44.417Z,1478844464.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:44.780Z,1478844464.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:44.813Z,1478844464.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:45.170Z,1478844465.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:45.185Z,1478844465.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:45.234Z,1478844465.234 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:07:45.234Z,1478844465.234 [BPC1] No Fault, FailCount= 2
2016-11-11T06:07:45.584Z,1478844465.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:45.701Z,1478844465.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:45.970Z,1478844465.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:46.033Z,1478844466.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:46.377Z,1478844466.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:46.412Z,1478844466.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:46.780Z,1478844466.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:46.795Z,1478844466.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:47.192Z,1478844467.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:47.223Z,1478844467.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:47.601Z,1478844467.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:47.678Z,1478844467.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:47.975Z,1478844467.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:48.002Z,1478844468.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:48.379Z,1478844468.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:48.406Z,1478844468.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:48.791Z,1478844468.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:48.810Z,1478844468.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:49.188Z,1478844469.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:49.216Z,1478844469.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:49.589Z,1478844469.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:49.609Z,1478844469.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:49.976Z,1478844469.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:50.020Z,1478844470.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:50.369Z,1478844470.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:50.405Z,1478844470.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:50.780Z,1478844470.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:50.815Z,1478844470.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:51.196Z,1478844471.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:51.212Z,1478844471.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:51.580Z,1478844471.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:51.615Z,1478844471.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:52.002Z,1478844472.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:52.021Z,1478844472.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:52.382Z,1478844472.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:52.410Z,1478844472.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:52.785Z,1478844472.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:52.821Z,1478844472.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:53.184Z,1478844473.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:53.225Z,1478844473.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:53.617Z,1478844473.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:53.636Z,1478844473.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:53.974Z,1478844473.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:54.005Z,1478844474.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:54.386Z,1478844474.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:54.405Z,1478844474.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:54.795Z,1478844474.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:54.817Z,1478844474.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:55.188Z,1478844475.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:55.214Z,1478844475.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:55.597Z,1478844475.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:55.633Z,1478844475.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:55.974Z,1478844475.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:55.993Z,1478844475.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:56.381Z,1478844476.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:56.437Z,1478844476.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:56.785Z,1478844476.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:56.834Z,1478844476.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:57.184Z,1478844477.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:57.209Z,1478844477.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:57.597Z,1478844477.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:57.645Z,1478844477.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:57.970Z,1478844477.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:58.005Z,1478844478.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:58.369Z,1478844478.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:58.418Z,1478844478.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:58.780Z,1478844478.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:58.849Z,1478844478.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:59.184Z,1478844479.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:59.214Z,1478844479.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:59.598Z,1478844479.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:07:59.633Z,1478844479.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:07:59.970Z,1478844479.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:00.013Z,1478844480.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:00.373Z,1478844480.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:00.413Z,1478844480.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:00.784Z,1478844480.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:00.814Z,1478844480.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:01.188Z,1478844481.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:01.223Z,1478844481.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:01.597Z,1478844481.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:01.669Z,1478844481.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:01.985Z,1478844481.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:02.020Z,1478844482.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:02.377Z,1478844482.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:02.397Z,1478844482.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:02.782Z,1478844482.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:02.801Z,1478844482.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:03.184Z,1478844483.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:03.205Z,1478844483.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:03.584Z,1478844483.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:03.606Z,1478844483.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:03.971Z,1478844483.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:04.002Z,1478844484.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:04.369Z,1478844484.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:04.406Z,1478844484.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:04.788Z,1478844484.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:04.803Z,1478844484.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:05.198Z,1478844485.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:05.221Z,1478844485.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:05.593Z,1478844485.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:05.613Z,1478844485.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:05.970Z,1478844485.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:06.006Z,1478844486.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:06.388Z,1478844486.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:06.426Z,1478844486.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:06.821Z,1478844486.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:06.836Z,1478844486.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:07.187Z,1478844487.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:07.232Z,1478844487.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:14.910Z,1478844494.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:14.928Z,1478844494.928 [BPC1](ERROR): Failed to receive battery data
2016-11-11T06:08:14.928Z,1478844494.928 [BPC1] Communications Fault, FailCount= 1
2016-11-11T06:08:14.928Z,1478844494.928 [BPC1](ERROR): Communications Fault
2016-11-11T06:08:14.949Z,1478844494.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:15.036Z,1478844495.036 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T06:08:15.108Z,1478844495.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:15.152Z,1478844495.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:15.474Z,1478844495.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:15.490Z,1478844495.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:15.878Z,1478844495.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:15.933Z,1478844495.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:15.977Z,1478844495.977 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:08:15.977Z,1478844495.977 [BPC1] No Fault, FailCount= 1
2016-11-11T06:08:16.277Z,1478844496.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:16.407Z,1478844496.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:16.700Z,1478844496.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:16.761Z,1478844496.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:17.084Z,1478844497.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:17.113Z,1478844497.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:17.490Z,1478844497.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:17.525Z,1478844497.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:17.930Z,1478844497.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:18.005Z,1478844498.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:18.293Z,1478844498.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:18.321Z,1478844498.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:18.669Z,1478844498.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:18.705Z,1478844498.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:19.074Z,1478844499.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:19.124Z,1478844499.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:19.487Z,1478844499.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:19.502Z,1478844499.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:19.909Z,1478844499.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:19.970Z,1478844499.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:20.292Z,1478844500.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:20.326Z,1478844500.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:20.692Z,1478844500.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:20.707Z,1478844500.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:21.087Z,1478844501.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:21.103Z,1478844501.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:21.471Z,1478844501.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:21.566Z,1478844501.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:21.880Z,1478844501.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:21.926Z,1478844501.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:22.280Z,1478844502.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:22.310Z,1478844502.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:22.671Z,1478844502.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:22.709Z,1478844502.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:23.089Z,1478844503.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:23.117Z,1478844503.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:23.504Z,1478844503.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:23.576Z,1478844503.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:23.882Z,1478844503.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:23.921Z,1478844503.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:24.280Z,1478844504.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:24.324Z,1478844504.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:24.681Z,1478844504.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:24.702Z,1478844504.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:25.080Z,1478844505.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:25.141Z,1478844505.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:25.523Z,1478844505.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:25.601Z,1478844505.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:25.889Z,1478844505.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:25.909Z,1478844505.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:26.292Z,1478844506.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:26.315Z,1478844506.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:26.686Z,1478844506.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:26.729Z,1478844506.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:27.078Z,1478844507.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:27.117Z,1478844507.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:27.484Z,1478844507.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:27.564Z,1478844507.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:27.878Z,1478844507.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:27.989Z,1478844507.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:28.273Z,1478844508.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:28.313Z,1478844508.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:28.676Z,1478844508.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:28.737Z,1478844508.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:29.094Z,1478844509.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:29.121Z,1478844509.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:29.486Z,1478844509.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:29.608Z,1478844509.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:29.884Z,1478844509.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:29.929Z,1478844509.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:30.277Z,1478844510.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:30.330Z,1478844510.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:30.673Z,1478844510.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:30.693Z,1478844510.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:31.077Z,1478844511.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:31.092Z,1478844511.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:31.476Z,1478844511.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:31.491Z,1478844511.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:31.890Z,1478844511.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:31.943Z,1478844511.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:32.289Z,1478844512.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:32.309Z,1478844512.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:32.690Z,1478844512.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:32.713Z,1478844512.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:33.069Z,1478844513.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:33.094Z,1478844513.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:33.485Z,1478844513.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:33.501Z,1478844513.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:33.902Z,1478844513.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:33.943Z,1478844513.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:34.270Z,1478844514.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:34.301Z,1478844514.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:34.669Z,1478844514.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:34.705Z,1478844514.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:35.084Z,1478844515.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:35.117Z,1478844515.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:35.502Z,1478844515.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:35.539Z,1478844515.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:35.884Z,1478844515.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:35.922Z,1478844515.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:36.278Z,1478844516.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:36.293Z,1478844516.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:36.677Z,1478844516.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:36.697Z,1478844516.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:37.081Z,1478844517.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:37.096Z,1478844517.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:37.508Z,1478844517.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:37.556Z,1478844517.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:37.880Z,1478844517.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:37.896Z,1478844517.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:38.288Z,1478844518.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:38.303Z,1478844518.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:38.684Z,1478844518.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:38.700Z,1478844518.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:39.073Z,1478844519.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:39.093Z,1478844519.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:39.501Z,1478844519.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:39.523Z,1478844519.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:39.874Z,1478844519.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:39.889Z,1478844519.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:40.273Z,1478844520.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:40.288Z,1478844520.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:40.673Z,1478844520.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:40.726Z,1478844520.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:41.088Z,1478844521.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:41.121Z,1478844521.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:41.492Z,1478844521.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:41.541Z,1478844521.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:41.884Z,1478844521.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:41.899Z,1478844521.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:42.270Z,1478844522.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:42.317Z,1478844522.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:42.673Z,1478844522.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:42.721Z,1478844522.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:43.070Z,1478844523.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:43.089Z,1478844523.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:43.474Z,1478844523.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:43.493Z,1478844523.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:43.880Z,1478844523.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:43.896Z,1478844523.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:44.283Z,1478844524.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:44.301Z,1478844524.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:44.684Z,1478844524.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:44.700Z,1478844524.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:45.073Z,1478844525.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:45.093Z,1478844525.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:45.482Z,1478844525.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:45.497Z,1478844525.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:45.878Z,1478844525.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:45.894Z,1478844525.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:46.274Z,1478844526.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:46.316Z,1478844526.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:46.684Z,1478844526.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:46.699Z,1478844526.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:47.088Z,1478844527.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:47.103Z,1478844527.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:47.484Z,1478844527.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:47.500Z,1478844527.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:47.873Z,1478844527.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:47.893Z,1478844527.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:48.271Z,1478844528.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:48.287Z,1478844528.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:48.674Z,1478844528.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:48.697Z,1478844528.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:49.081Z,1478844529.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:49.101Z,1478844529.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:49.493Z,1478844529.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:49.512Z,1478844529.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:49.913Z,1478844529.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:49.929Z,1478844529.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:50.273Z,1478844530.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:50.289Z,1478844530.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:50.674Z,1478844530.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:50.689Z,1478844530.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:51.075Z,1478844531.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:51.090Z,1478844531.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:51.477Z,1478844531.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:51.502Z,1478844531.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:51.884Z,1478844531.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:51.902Z,1478844531.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:52.288Z,1478844532.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:52.305Z,1478844532.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:52.680Z,1478844532.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:52.701Z,1478844532.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:53.073Z,1478844533.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:53.106Z,1478844533.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:53.474Z,1478844533.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:53.522Z,1478844533.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:53.871Z,1478844533.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:53.885Z,1478844533.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:54.269Z,1478844534.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:54.317Z,1478844534.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:54.684Z,1478844534.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:54.701Z,1478844534.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:55.084Z,1478844535.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:55.126Z,1478844535.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:55.491Z,1478844535.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:55.534Z,1478844535.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:55.874Z,1478844535.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:55.890Z,1478844535.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:56.269Z,1478844536.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:56.285Z,1478844536.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:56.684Z,1478844536.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:56.700Z,1478844536.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:57.088Z,1478844537.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:57.104Z,1478844537.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:57.487Z,1478844537.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:57.510Z,1478844537.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:57.874Z,1478844537.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:57.889Z,1478844537.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:58.273Z,1478844538.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:58.297Z,1478844538.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:58.688Z,1478844538.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:58.703Z,1478844538.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:59.089Z,1478844539.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:59.104Z,1478844539.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:59.484Z,1478844539.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:59.517Z,1478844539.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:08:59.875Z,1478844539.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:08:59.890Z,1478844539.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:00.269Z,1478844540.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:00.284Z,1478844540.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:00.680Z,1478844540.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:00.696Z,1478844540.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:01.088Z,1478844541.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:01.104Z,1478844541.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:01.484Z,1478844541.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:01.501Z,1478844541.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:01.871Z,1478844541.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:01.887Z,1478844541.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:02.270Z,1478844542.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:02.301Z,1478844542.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:02.684Z,1478844542.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:02.709Z,1478844542.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:03.086Z,1478844543.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:03.126Z,1478844543.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:03.489Z,1478844543.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:03.509Z,1478844543.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:03.872Z,1478844543.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:03.887Z,1478844543.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:04.270Z,1478844544.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:04.294Z,1478844544.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:04.323Z,1478844544.323 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T06:09:04.323Z,1478844544.323 [Rowe_600LCM] Communications Fault, FailCount= 1
2016-11-11T06:09:04.323Z,1478844544.323 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T06:09:04.338Z,1478844544.338 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T06:09:04.680Z,1478844544.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:04.712Z,1478844544.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T06:09:04.714Z,1478844544.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:04.727Z,1478844544.727 [Rowe_600LCM](INFO): Powering down
2016-11-11T06:09:05.084Z,1478844545.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:05.108Z,1478844545.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T06:09:05.109Z,1478844545.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:05.481Z,1478844545.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:05.505Z,1478844545.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:09:05.506Z,1478844545.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:05.883Z,1478844545.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:05.909Z,1478844545.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:09:05.910Z,1478844545.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:05.959Z,1478844545.959 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T06:09:05.959Z,1478844545.959 [Rowe_600LCM] No Fault, FailCount= 1
2016-11-11T06:09:06.269Z,1478844546.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:06.312Z,1478844546.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:09:06.313Z,1478844546.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:06.331Z,1478844546.331 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T06:04:05.0Z
2016-11-11T06:09:06.335Z,1478844546.335 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T06:09:06.335Z,1478844546.335 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T06:09:06.343Z,1478844546.343 [Rowe_600LCM](INFO): Initializing
2016-11-11T06:09:06.344Z,1478844546.344 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T06:09:06.344Z,1478844546.344 [Rowe_600LCM](INFO): LCM OK
2016-11-11T06:09:06.344Z,1478844546.344 [Rowe_600LCM](INFO): Powering up
2016-11-11T06:09:06.680Z,1478844546.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:06.705Z,1478844546.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T06:09:06.706Z,1478844546.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:08.068Z,1478844548.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:08.097Z,1478844548.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2016-11-11T06:09:08.098Z,1478844548.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:08.201Z,1478844548.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:08.225Z,1478844548.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2016-11-11T06:09:08.226Z,1478844548.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:10.537Z,1478844550.537 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T06:09:10.626Z,1478844550.626 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T06:09:10.628Z,1478844550.628 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T06:09:10.629Z,1478844550.629 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T06:09:10.630Z,1478844550.630 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T06:09:12.674Z,1478844552.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:12.684Z,1478844552.684 [BPC1](ERROR): Failed to receive battery data
2016-11-11T06:09:12.685Z,1478844552.685 [BPC1] Communications Fault, FailCount= 1
2016-11-11T06:09:12.685Z,1478844552.685 [BPC1](ERROR): Communications Fault
2016-11-11T06:09:12.717Z,1478844552.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:12.768Z,1478844552.768 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T06:09:12.778Z,1478844552.778 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0032.lzma
2016-11-11T06:09:12.842Z,1478844552.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:12.893Z,1478844552.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:13.197Z,1478844553.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:13.228Z,1478844553.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:14.789Z,1478844554.789 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0032.lzma.bak
2016-11-11T06:09:14.789Z,1478844554.789 [DataOverHttps](INFO): SBD MOMSN=4555083
2016-11-11T06:09:14.830Z,1478844554.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:14.864Z,1478844554.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:14.917Z,1478844554.917 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:09:14.917Z,1478844554.917 [BPC1] No Fault, FailCount= 1
2016-11-11T06:09:15.900Z,1478844555.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:15.969Z,1478844555.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:16.075Z,1478844556.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:16.108Z,1478844556.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:19.797Z,1478844559.797 [NAL9602](INFO): Powering down
2016-11-11T06:09:19.817Z,1478844559.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:19.877Z,1478844559.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:19.978Z,1478844559.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:20.006Z,1478844560.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:20.360Z,1478844560.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:20.429Z,1478844560.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:20.753Z,1478844560.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:20.778Z,1478844560.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:21.157Z,1478844561.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:21.189Z,1478844561.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:21.553Z,1478844561.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:21.588Z,1478844561.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:25.039Z,1478844565.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:25.055Z,1478844565.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:25.128Z,1478844565.128 [DataOverHttps](INFO): Sending 162 bytes from file Logs/20161111T044527/Express0033.lzma
2016-11-11T06:09:25.173Z,1478844565.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:25.209Z,1478844565.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:25.541Z,1478844565.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:25.561Z,1478844565.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:25.917Z,1478844565.917 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0033.lzma.bak
2016-11-11T06:09:25.917Z,1478844565.917 [DataOverHttps](INFO): SBD MOMSN=4555085
2016-11-11T06:09:25.952Z,1478844565.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:25.984Z,1478844565.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:27.288Z,1478844567.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:27.310Z,1478844567.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:27.322Z,1478844567.322 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T06:09:27.322Z,1478844567.322 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T06:09:27.323Z,1478844567.323 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T06:09:27.405Z,1478844567.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:27.428Z,1478844567.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:30.908Z,1478844570.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:30.969Z,1478844570.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:31.056Z,1478844571.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:31.085Z,1478844571.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:31.437Z,1478844571.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:31.462Z,1478844571.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:31.833Z,1478844571.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:31.893Z,1478844571.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:32.239Z,1478844572.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:32.254Z,1478844572.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:32.638Z,1478844572.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:32.685Z,1478844572.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:33.033Z,1478844573.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:33.053Z,1478844573.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:33.440Z,1478844573.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:33.493Z,1478844573.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:33.840Z,1478844573.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:33.889Z,1478844573.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:34.240Z,1478844574.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:34.261Z,1478844574.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:34.640Z,1478844574.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:34.655Z,1478844574.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:35.040Z,1478844575.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:35.054Z,1478844575.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:35.444Z,1478844575.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:35.459Z,1478844575.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:35.840Z,1478844575.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:35.855Z,1478844575.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:36.241Z,1478844576.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:36.261Z,1478844576.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:36.641Z,1478844576.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:36.656Z,1478844576.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:37.045Z,1478844577.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:37.066Z,1478844577.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:37.441Z,1478844577.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:37.461Z,1478844577.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:37.841Z,1478844577.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:37.855Z,1478844577.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:38.240Z,1478844578.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:38.255Z,1478844578.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:38.633Z,1478844578.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:38.662Z,1478844578.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:39.033Z,1478844579.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:39.066Z,1478844579.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:39.433Z,1478844579.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:39.465Z,1478844579.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:39.833Z,1478844579.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:39.866Z,1478844579.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:40.233Z,1478844580.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:40.265Z,1478844580.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:40.637Z,1478844580.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:40.669Z,1478844580.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:41.053Z,1478844581.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:41.076Z,1478844581.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:41.441Z,1478844581.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:41.456Z,1478844581.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:41.838Z,1478844581.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:41.854Z,1478844581.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:42.241Z,1478844582.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:42.256Z,1478844582.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:42.636Z,1478844582.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:42.664Z,1478844582.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:43.048Z,1478844583.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:43.106Z,1478844583.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:43.433Z,1478844583.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:43.458Z,1478844583.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:43.837Z,1478844583.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:43.857Z,1478844583.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:44.233Z,1478844584.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:44.253Z,1478844584.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:44.637Z,1478844584.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:44.669Z,1478844584.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:45.033Z,1478844585.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:45.053Z,1478844585.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:45.437Z,1478844585.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:45.457Z,1478844585.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:45.833Z,1478844585.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:45.866Z,1478844585.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:46.237Z,1478844586.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:46.252Z,1478844586.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:46.633Z,1478844586.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:46.653Z,1478844586.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:47.037Z,1478844587.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:47.077Z,1478844587.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:47.445Z,1478844587.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:47.505Z,1478844587.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:47.833Z,1478844587.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:47.881Z,1478844587.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:48.237Z,1478844588.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:48.278Z,1478844588.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:48.633Z,1478844588.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:48.653Z,1478844588.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:49.045Z,1478844589.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:49.061Z,1478844589.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:49.441Z,1478844589.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:49.461Z,1478844589.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:49.837Z,1478844589.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:49.852Z,1478844589.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:50.234Z,1478844590.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:50.250Z,1478844590.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:50.637Z,1478844590.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:50.652Z,1478844590.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:51.065Z,1478844591.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:51.079Z,1478844591.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:51.437Z,1478844591.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:51.457Z,1478844591.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:51.837Z,1478844591.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:51.852Z,1478844591.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:52.233Z,1478844592.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:52.248Z,1478844592.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:52.641Z,1478844592.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:52.661Z,1478844592.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:53.033Z,1478844593.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:53.052Z,1478844593.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:53.430Z,1478844593.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:53.444Z,1478844593.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:53.841Z,1478844593.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:53.861Z,1478844593.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:54.237Z,1478844594.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:54.257Z,1478844594.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:54.633Z,1478844594.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:54.653Z,1478844594.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:55.037Z,1478844595.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:55.057Z,1478844595.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:55.437Z,1478844595.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:55.457Z,1478844595.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:55.837Z,1478844595.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:55.857Z,1478844595.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:56.281Z,1478844596.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:56.306Z,1478844596.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:56.637Z,1478844596.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:56.657Z,1478844596.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:57.037Z,1478844597.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:57.052Z,1478844597.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:57.432Z,1478844597.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:57.453Z,1478844597.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:57.837Z,1478844597.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:57.852Z,1478844597.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:58.233Z,1478844598.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:58.248Z,1478844598.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:58.637Z,1478844598.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:58.677Z,1478844598.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:59.036Z,1478844599.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:59.057Z,1478844599.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:59.437Z,1478844599.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:59.452Z,1478844599.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:09:59.832Z,1478844599.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:09:59.849Z,1478844599.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:00.233Z,1478844600.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:00.266Z,1478844600.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:00.638Z,1478844600.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:00.653Z,1478844600.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:01.034Z,1478844601.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:01.050Z,1478844601.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:01.437Z,1478844601.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:01.477Z,1478844601.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:01.838Z,1478844601.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:01.853Z,1478844601.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:02.238Z,1478844602.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:02.285Z,1478844602.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:02.633Z,1478844602.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:02.681Z,1478844602.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:03.037Z,1478844603.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:03.053Z,1478844603.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:03.462Z,1478844603.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:03.486Z,1478844603.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:03.835Z,1478844603.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:03.870Z,1478844603.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:04.233Z,1478844604.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:04.252Z,1478844604.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:04.633Z,1478844604.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:04.657Z,1478844604.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:05.034Z,1478844605.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:05.066Z,1478844605.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:05.433Z,1478844605.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:05.456Z,1478844605.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:05.833Z,1478844605.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:05.857Z,1478844605.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:06.233Z,1478844606.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:06.261Z,1478844606.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:06.633Z,1478844606.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:06.661Z,1478844606.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:07.033Z,1478844607.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:07.057Z,1478844607.057 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:07.057Z,1478844607.057 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2016-11-11T06:10:07.058Z,1478844607.057 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:10:07.072Z,1478844607.072 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:07.072Z,1478844607.072 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2016-11-11T06:10:07.072Z,1478844607.072 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:10:07.100Z,1478844607.099 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:10:07.100Z,1478844607.100 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:10:07.433Z,1478844607.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:07.495Z,1478844607.495 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:10:07.495Z,1478844607.495 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2016-11-11T06:10:07.500Z,1478844607.500 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:10:07.500Z,1478844607.500 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2016-11-11T06:10:07.833Z,1478844607.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:07.859Z,1478844607.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:10:07.860Z,1478844607.860 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:10:07.860Z,1478844607.860 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:10:07.865Z,1478844607.865 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:10:07.865Z,1478844607.865 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:10:07.866Z,1478844607.866 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:10:08.233Z,1478844608.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:08.281Z,1478844608.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:08.633Z,1478844608.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:08.698Z,1478844608.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:09.033Z,1478844609.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:09.061Z,1478844609.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:09.444Z,1478844609.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:09.471Z,1478844609.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:09.833Z,1478844609.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:09.853Z,1478844609.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:10.238Z,1478844610.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:10.253Z,1478844610.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:10.645Z,1478844610.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:10.717Z,1478844610.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:11.033Z,1478844611.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:11.058Z,1478844611.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:11.433Z,1478844611.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:11.469Z,1478844611.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:11.475Z,1478844611.475 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:11.475Z,1478844611.476 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 8
2016-11-11T06:10:11.476Z,1478844611.476 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:10:11.531Z,1478844611.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:10:11.833Z,1478844611.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:11.865Z,1478844611.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:11.885Z,1478844611.885 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:10:11.885Z,1478844611.885 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 8
2016-11-11T06:10:12.233Z,1478844612.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:12.266Z,1478844612.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:12.272Z,1478844612.272 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:10:12.273Z,1478844612.273 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:10:12.273Z,1478844612.273 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:10:12.633Z,1478844612.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:12.653Z,1478844612.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:13.033Z,1478844613.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:13.053Z,1478844613.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:13.437Z,1478844613.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:13.457Z,1478844613.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:13.833Z,1478844613.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:13.853Z,1478844613.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:14.239Z,1478844614.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:14.254Z,1478844614.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:14.640Z,1478844614.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:14.686Z,1478844614.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:15.039Z,1478844615.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:15.054Z,1478844615.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:15.441Z,1478844615.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:15.461Z,1478844615.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:15.844Z,1478844615.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:15.899Z,1478844615.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:16.240Z,1478844616.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:16.261Z,1478844616.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:16.633Z,1478844616.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:16.685Z,1478844616.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:17.044Z,1478844617.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:17.100Z,1478844617.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:17.433Z,1478844617.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:17.466Z,1478844617.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:17.833Z,1478844617.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:17.869Z,1478844617.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:18.233Z,1478844618.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:18.269Z,1478844618.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:18.633Z,1478844618.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:18.653Z,1478844618.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:19.040Z,1478844619.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:19.055Z,1478844619.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:19.439Z,1478844619.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:19.461Z,1478844619.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:19.840Z,1478844619.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:19.854Z,1478844619.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:20.239Z,1478844620.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:20.258Z,1478844620.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:20.649Z,1478844620.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:20.672Z,1478844620.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:21.033Z,1478844621.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:21.053Z,1478844621.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:21.433Z,1478844621.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:21.449Z,1478844621.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:21.844Z,1478844621.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:21.859Z,1478844621.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:22.240Z,1478844622.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:22.261Z,1478844622.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:22.678Z,1478844622.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:22.713Z,1478844622.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:23.044Z,1478844623.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:23.060Z,1478844623.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:23.440Z,1478844623.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:23.455Z,1478844623.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:23.840Z,1478844623.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:23.855Z,1478844623.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:24.233Z,1478844624.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:24.268Z,1478844624.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:24.650Z,1478844624.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:24.717Z,1478844624.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:25.041Z,1478844625.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:25.073Z,1478844625.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:25.433Z,1478844625.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:25.473Z,1478844625.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:25.833Z,1478844625.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:25.848Z,1478844625.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:26.233Z,1478844626.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:26.253Z,1478844626.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:26.645Z,1478844626.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:26.660Z,1478844626.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:27.036Z,1478844627.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:27.069Z,1478844627.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:27.440Z,1478844627.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:27.455Z,1478844627.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:27.833Z,1478844627.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:27.868Z,1478844627.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:31.294Z,1478844631.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:31.358Z,1478844631.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:31.466Z,1478844631.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:31.505Z,1478844631.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:31.828Z,1478844631.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:31.875Z,1478844631.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:32.224Z,1478844632.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:32.245Z,1478844632.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:32.633Z,1478844632.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:32.685Z,1478844632.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:33.024Z,1478844633.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:33.054Z,1478844633.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:33.428Z,1478844633.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:33.478Z,1478844633.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:33.828Z,1478844633.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:33.850Z,1478844633.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:34.221Z,1478844634.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:34.254Z,1478844634.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:34.621Z,1478844634.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:34.657Z,1478844634.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:35.029Z,1478844635.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:35.064Z,1478844635.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:35.427Z,1478844635.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:35.442Z,1478844635.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:35.821Z,1478844635.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:35.836Z,1478844635.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:36.229Z,1478844636.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:36.249Z,1478844636.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:36.678Z,1478844636.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:36.740Z,1478844636.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:37.030Z,1478844637.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:37.044Z,1478844637.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:37.428Z,1478844637.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:37.444Z,1478844637.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:37.834Z,1478844637.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:37.861Z,1478844637.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:38.234Z,1478844638.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:38.249Z,1478844638.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:38.664Z,1478844638.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:38.707Z,1478844638.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:39.029Z,1478844639.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:39.061Z,1478844639.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:39.421Z,1478844639.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:39.442Z,1478844639.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:39.828Z,1478844639.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:39.844Z,1478844639.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:40.232Z,1478844640.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:40.324Z,1478844640.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:40.628Z,1478844640.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:40.650Z,1478844640.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:41.036Z,1478844641.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:41.053Z,1478844641.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:41.436Z,1478844641.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:41.458Z,1478844641.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:41.821Z,1478844641.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:41.853Z,1478844641.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:42.221Z,1478844642.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:42.307Z,1478844642.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:42.629Z,1478844642.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:42.654Z,1478844642.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:43.025Z,1478844643.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:43.063Z,1478844643.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:43.425Z,1478844643.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:43.456Z,1478844643.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:43.821Z,1478844643.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:43.841Z,1478844643.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:44.224Z,1478844644.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:44.294Z,1478844644.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:44.629Z,1478844644.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:44.645Z,1478844644.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:45.028Z,1478844645.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:45.049Z,1478844645.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:45.428Z,1478844645.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:45.502Z,1478844645.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:45.829Z,1478844645.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:45.844Z,1478844645.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:46.249Z,1478844646.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:46.335Z,1478844646.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:46.628Z,1478844646.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:46.642Z,1478844646.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:47.021Z,1478844647.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:47.073Z,1478844647.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:47.421Z,1478844647.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:47.470Z,1478844647.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:47.821Z,1478844647.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:47.852Z,1478844647.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:48.225Z,1478844648.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:48.251Z,1478844648.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:48.621Z,1478844648.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:48.649Z,1478844648.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:49.028Z,1478844649.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:49.049Z,1478844649.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:49.428Z,1478844649.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:49.443Z,1478844649.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:49.832Z,1478844649.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:49.847Z,1478844649.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:50.229Z,1478844650.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:50.249Z,1478844650.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:50.636Z,1478844650.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:50.680Z,1478844650.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:51.021Z,1478844651.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:51.053Z,1478844651.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:51.421Z,1478844651.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:51.454Z,1478844651.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:51.821Z,1478844651.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:51.853Z,1478844651.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:52.221Z,1478844652.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:52.252Z,1478844652.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:52.650Z,1478844652.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:52.701Z,1478844652.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:53.021Z,1478844653.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:53.057Z,1478844653.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:53.421Z,1478844653.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:53.456Z,1478844653.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:53.821Z,1478844653.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:53.863Z,1478844653.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:54.224Z,1478844654.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:54.294Z,1478844654.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:54.625Z,1478844654.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:54.661Z,1478844654.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:55.021Z,1478844655.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:55.045Z,1478844655.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:55.431Z,1478844655.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:55.447Z,1478844655.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:55.832Z,1478844655.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:55.847Z,1478844655.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:56.264Z,1478844656.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:56.331Z,1478844656.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:56.621Z,1478844656.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:56.646Z,1478844656.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:57.037Z,1478844657.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:57.052Z,1478844657.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:57.421Z,1478844657.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:57.454Z,1478844657.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:57.821Z,1478844657.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:57.853Z,1478844657.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:58.260Z,1478844658.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:58.301Z,1478844658.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:58.621Z,1478844658.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:58.657Z,1478844658.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:59.021Z,1478844659.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:59.057Z,1478844659.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:59.421Z,1478844659.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:59.488Z,1478844659.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:10:59.821Z,1478844659.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:10:59.858Z,1478844659.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:00.266Z,1478844660.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:00.320Z,1478844660.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:00.629Z,1478844660.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:00.644Z,1478844660.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:01.028Z,1478844661.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:01.075Z,1478844661.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:01.432Z,1478844661.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:01.447Z,1478844661.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:01.828Z,1478844661.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:01.881Z,1478844661.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:02.227Z,1478844662.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:02.312Z,1478844662.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:02.621Z,1478844662.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:02.653Z,1478844662.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:03.025Z,1478844663.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:03.057Z,1478844663.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:03.421Z,1478844663.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:03.456Z,1478844663.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:03.821Z,1478844663.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:03.857Z,1478844663.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:04.225Z,1478844664.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:04.257Z,1478844664.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:04.629Z,1478844664.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:04.673Z,1478844664.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:05.021Z,1478844665.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:05.045Z,1478844665.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:05.424Z,1478844665.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:05.453Z,1478844665.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:05.828Z,1478844665.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:05.842Z,1478844665.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:06.228Z,1478844666.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:06.243Z,1478844666.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:06.644Z,1478844666.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:06.680Z,1478844666.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:06.689Z,1478844666.689 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T06:11:06.689Z,1478844666.690 [Rowe_600LCM] Communications Fault, FailCount= 2
2016-11-11T06:11:06.690Z,1478844666.690 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T06:11:06.729Z,1478844666.729 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T06:11:07.021Z,1478844667.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:07.054Z,1478844667.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T06:11:07.055Z,1478844667.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:07.091Z,1478844667.091 [Rowe_600LCM](INFO): Powering down
2016-11-11T06:11:07.421Z,1478844667.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:07.452Z,1478844667.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T06:11:07.453Z,1478844667.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:07.820Z,1478844667.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:07.837Z,1478844667.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:11:07.838Z,1478844667.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:08.221Z,1478844668.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:08.241Z,1478844668.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:11:08.242Z,1478844668.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:08.308Z,1478844668.308 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T06:11:08.308Z,1478844668.308 [Rowe_600LCM] No Fault, FailCount= 2
2016-11-11T06:11:08.624Z,1478844668.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:08.639Z,1478844668.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:11:08.640Z,1478844668.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:08.707Z,1478844668.707 [Rowe_600LCM](INFO): Initializing
2016-11-11T06:11:08.708Z,1478844668.708 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T06:11:08.708Z,1478844668.708 [Rowe_600LCM](INFO): LCM OK
2016-11-11T06:11:08.708Z,1478844668.708 [Rowe_600LCM](INFO): Powering up
2016-11-11T06:11:09.033Z,1478844669.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:09.047Z,1478844669.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T06:11:09.049Z,1478844669.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:09.428Z,1478844669.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:09.442Z,1478844669.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T06:11:09.444Z,1478844669.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:09.827Z,1478844669.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:09.846Z,1478844669.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T06:11:09.851Z,1478844669.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:10.232Z,1478844670.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:10.253Z,1478844670.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T06:11:10.254Z,1478844670.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:10.628Z,1478844670.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:10.648Z,1478844670.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T06:11:10.649Z,1478844670.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:11.032Z,1478844671.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:11.047Z,1478844671.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T06:11:11.048Z,1478844671.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:11.436Z,1478844671.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:11.451Z,1478844671.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T06:11:11.452Z,1478844671.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:11.836Z,1478844671.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:11.851Z,1478844671.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T06:11:11.852Z,1478844671.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:12.225Z,1478844672.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:12.250Z,1478844672.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T06:11:12.251Z,1478844672.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:12.629Z,1478844672.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:12.661Z,1478844672.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T06:11:12.662Z,1478844672.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:12.833Z,1478844672.833 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T06:11:12.914Z,1478844672.914 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T06:11:12.916Z,1478844672.916 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T06:11:12.917Z,1478844672.917 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T06:11:12.918Z,1478844672.918 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T06:11:13.023Z,1478844673.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:13.066Z,1478844673.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T06:11:13.068Z,1478844673.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:13.452Z,1478844673.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:13.468Z,1478844673.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:13.833Z,1478844673.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:13.869Z,1478844673.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:14.228Z,1478844674.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:14.247Z,1478844674.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:14.621Z,1478844674.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:14.705Z,1478844674.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:15.029Z,1478844675.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:15.057Z,1478844675.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:15.427Z,1478844675.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:15.485Z,1478844675.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:15.830Z,1478844675.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:15.845Z,1478844675.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:16.229Z,1478844676.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:16.280Z,1478844676.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:16.630Z,1478844676.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:16.679Z,1478844676.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:17.029Z,1478844677.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:17.045Z,1478844677.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:17.428Z,1478844677.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:17.443Z,1478844677.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:17.824Z,1478844677.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:17.854Z,1478844677.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:18.224Z,1478844678.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:18.261Z,1478844678.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:18.629Z,1478844678.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:18.646Z,1478844678.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:19.021Z,1478844679.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:19.056Z,1478844679.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:19.437Z,1478844679.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:19.455Z,1478844679.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:19.842Z,1478844679.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:19.894Z,1478844679.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:20.221Z,1478844680.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:20.235Z,1478844680.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:20.627Z,1478844680.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:20.642Z,1478844680.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:21.028Z,1478844681.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:21.043Z,1478844681.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:21.427Z,1478844681.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:21.442Z,1478844681.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:21.828Z,1478844681.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:21.843Z,1478844681.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:22.228Z,1478844682.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:22.242Z,1478844682.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:22.629Z,1478844682.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:22.649Z,1478844682.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:23.021Z,1478844683.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:23.055Z,1478844683.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:23.421Z,1478844683.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:23.453Z,1478844683.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:23.821Z,1478844683.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:23.857Z,1478844683.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:24.221Z,1478844684.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:24.241Z,1478844684.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:24.629Z,1478844684.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:24.644Z,1478844684.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:25.024Z,1478844685.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:25.045Z,1478844685.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:25.432Z,1478844685.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:25.448Z,1478844685.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:25.834Z,1478844685.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:25.853Z,1478844685.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:26.228Z,1478844686.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:26.249Z,1478844686.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:26.624Z,1478844686.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:26.647Z,1478844686.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:27.021Z,1478844687.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:27.055Z,1478844687.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:27.435Z,1478844687.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:27.455Z,1478844687.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:27.821Z,1478844687.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:27.857Z,1478844687.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:28.221Z,1478844688.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:28.288Z,1478844688.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:31.810Z,1478844691.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:31.881Z,1478844691.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:31.977Z,1478844691.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:32.009Z,1478844692.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:32.364Z,1478844692.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:32.385Z,1478844692.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:32.764Z,1478844692.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:32.821Z,1478844692.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:33.164Z,1478844693.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:33.179Z,1478844693.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:33.565Z,1478844693.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:33.621Z,1478844693.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:33.957Z,1478844693.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:33.993Z,1478844693.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:34.357Z,1478844694.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:34.405Z,1478844694.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:34.757Z,1478844694.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:34.800Z,1478844694.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:35.157Z,1478844695.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:35.200Z,1478844695.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:35.565Z,1478844695.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:35.654Z,1478844695.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:35.962Z,1478844695.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:35.977Z,1478844695.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:36.364Z,1478844696.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:36.379Z,1478844696.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:36.763Z,1478844696.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:36.778Z,1478844696.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:37.169Z,1478844697.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:37.185Z,1478844697.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:37.571Z,1478844697.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:37.621Z,1478844697.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:37.957Z,1478844697.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:37.992Z,1478844697.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:38.357Z,1478844698.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:38.389Z,1478844698.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:38.757Z,1478844698.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:38.798Z,1478844698.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:39.162Z,1478844699.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:39.222Z,1478844699.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:39.557Z,1478844699.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:39.577Z,1478844699.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:39.957Z,1478844699.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:39.977Z,1478844699.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:40.357Z,1478844700.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:40.372Z,1478844700.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:40.757Z,1478844700.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:40.777Z,1478844700.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:41.180Z,1478844701.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:41.227Z,1478844701.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:41.564Z,1478844701.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:41.580Z,1478844701.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:41.969Z,1478844701.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:41.989Z,1478844701.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:42.363Z,1478844702.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:42.385Z,1478844702.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:42.764Z,1478844702.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:42.780Z,1478844702.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:43.184Z,1478844703.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:43.226Z,1478844703.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:43.557Z,1478844703.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:43.591Z,1478844703.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:43.957Z,1478844703.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:43.989Z,1478844703.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:44.357Z,1478844704.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:44.391Z,1478844704.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:44.768Z,1478844704.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:44.789Z,1478844704.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:45.202Z,1478844705.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:45.248Z,1478844705.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:45.561Z,1478844705.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:45.597Z,1478844705.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:45.957Z,1478844705.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:46.017Z,1478844706.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:46.364Z,1478844706.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:46.413Z,1478844706.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:46.763Z,1478844706.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:46.785Z,1478844706.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:47.163Z,1478844707.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:47.242Z,1478844707.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:47.565Z,1478844707.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:47.585Z,1478844707.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:47.965Z,1478844707.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:48.022Z,1478844708.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:48.364Z,1478844708.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:48.426Z,1478844708.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:48.764Z,1478844708.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:48.779Z,1478844708.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:49.157Z,1478844709.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:49.197Z,1478844709.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:49.586Z,1478844709.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:49.613Z,1478844709.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:49.957Z,1478844709.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:49.984Z,1478844709.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:50.361Z,1478844710.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:50.376Z,1478844710.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:50.760Z,1478844710.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:50.775Z,1478844710.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:51.164Z,1478844711.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:51.180Z,1478844711.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:51.566Z,1478844711.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:51.606Z,1478844711.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:51.965Z,1478844711.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:51.980Z,1478844711.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:52.365Z,1478844712.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:52.380Z,1478844712.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:52.764Z,1478844712.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:52.786Z,1478844712.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:53.188Z,1478844713.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:53.230Z,1478844713.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:53.557Z,1478844713.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:53.572Z,1478844713.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:53.965Z,1478844713.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:54.001Z,1478844714.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:54.357Z,1478844714.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:54.377Z,1478844714.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:54.760Z,1478844714.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:54.776Z,1478844714.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:55.181Z,1478844715.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:55.224Z,1478844715.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:55.557Z,1478844715.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:55.599Z,1478844715.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:55.961Z,1478844715.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:55.987Z,1478844715.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:56.365Z,1478844716.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:56.391Z,1478844716.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:56.761Z,1478844716.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:56.793Z,1478844716.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:57.196Z,1478844717.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:57.237Z,1478844717.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:57.556Z,1478844717.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:57.577Z,1478844717.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:57.961Z,1478844717.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:57.981Z,1478844717.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:58.357Z,1478844718.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:58.377Z,1478844718.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:58.769Z,1478844718.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:58.784Z,1478844718.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:59.181Z,1478844719.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:59.232Z,1478844719.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:59.564Z,1478844719.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:59.580Z,1478844719.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:11:59.965Z,1478844719.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:11:59.980Z,1478844719.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:00.364Z,1478844720.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:00.398Z,1478844720.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:00.765Z,1478844720.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:00.829Z,1478844720.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:01.164Z,1478844721.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:01.237Z,1478844721.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:01.557Z,1478844721.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:01.577Z,1478844721.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:01.957Z,1478844721.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:02.009Z,1478844722.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:02.369Z,1478844722.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:02.384Z,1478844722.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:02.764Z,1478844722.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:02.812Z,1478844722.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:03.164Z,1478844723.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:03.180Z,1478844723.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:03.572Z,1478844723.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:03.654Z,1478844723.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:03.964Z,1478844723.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:03.985Z,1478844723.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:04.365Z,1478844724.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:04.380Z,1478844724.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:04.768Z,1478844724.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:04.784Z,1478844724.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:05.165Z,1478844725.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:05.185Z,1478844725.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:05.568Z,1478844725.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:05.594Z,1478844725.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:05.958Z,1478844725.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:05.989Z,1478844725.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:06.357Z,1478844726.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:06.377Z,1478844726.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:06.761Z,1478844726.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:06.777Z,1478844726.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:07.190Z,1478844727.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:07.218Z,1478844727.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:07.564Z,1478844727.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:07.585Z,1478844727.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:07.964Z,1478844727.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:07.985Z,1478844727.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:08.363Z,1478844728.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:08.380Z,1478844728.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:08.765Z,1478844728.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:08.781Z,1478844728.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:09.182Z,1478844729.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:09.230Z,1478844729.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:09.557Z,1478844729.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:09.594Z,1478844729.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:09.961Z,1478844729.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:09.994Z,1478844729.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:10.357Z,1478844730.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:10.389Z,1478844730.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:10.757Z,1478844730.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:10.788Z,1478844730.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:11.165Z,1478844731.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:11.201Z,1478844731.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:11.557Z,1478844731.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:11.593Z,1478844731.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:11.957Z,1478844731.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:12.000Z,1478844732.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:12.357Z,1478844732.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:12.372Z,1478844732.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:12.757Z,1478844732.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:12.777Z,1478844732.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:13.170Z,1478844733.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:13.217Z,1478844733.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:13.564Z,1478844733.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:13.579Z,1478844733.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:13.964Z,1478844733.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:13.980Z,1478844733.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:14.363Z,1478844734.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:14.378Z,1478844734.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:14.760Z,1478844734.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:14.789Z,1478844734.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:15.187Z,1478844735.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:15.302Z,1478844735.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:15.557Z,1478844735.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:15.589Z,1478844735.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:15.965Z,1478844735.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:16.011Z,1478844736.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:16.357Z,1478844736.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:16.380Z,1478844736.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:16.757Z,1478844736.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:16.800Z,1478844736.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:17.157Z,1478844737.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:17.206Z,1478844737.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:17.557Z,1478844737.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:17.593Z,1478844737.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:17.960Z,1478844737.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:18.003Z,1478844738.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:18.363Z,1478844738.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:18.414Z,1478844738.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:18.763Z,1478844738.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:18.778Z,1478844738.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:19.168Z,1478844739.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:19.183Z,1478844739.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:19.564Z,1478844739.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:19.579Z,1478844739.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:19.965Z,1478844739.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:19.981Z,1478844739.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:20.357Z,1478844740.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:20.393Z,1478844740.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:20.757Z,1478844740.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:20.782Z,1478844740.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:21.168Z,1478844741.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:21.188Z,1478844741.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:21.557Z,1478844741.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:21.590Z,1478844741.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:21.968Z,1478844741.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:21.991Z,1478844741.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:22.357Z,1478844742.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:22.384Z,1478844742.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:22.757Z,1478844742.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:22.792Z,1478844742.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:23.162Z,1478844743.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:23.207Z,1478844743.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:23.554Z,1478844743.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:23.569Z,1478844743.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:23.957Z,1478844743.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:24.001Z,1478844744.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:24.357Z,1478844744.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:24.400Z,1478844744.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:24.757Z,1478844744.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:24.772Z,1478844744.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:25.162Z,1478844745.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:25.213Z,1478844745.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:25.563Z,1478844745.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:25.578Z,1478844745.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:25.964Z,1478844745.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:25.979Z,1478844745.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:26.364Z,1478844746.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:26.386Z,1478844746.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:26.757Z,1478844746.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:26.791Z,1478844746.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:27.169Z,1478844747.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:27.197Z,1478844747.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:27.567Z,1478844747.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:27.582Z,1478844747.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:27.973Z,1478844747.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:27.993Z,1478844747.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:28.362Z,1478844748.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:28.388Z,1478844748.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:31.991Z,1478844751.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:32.091Z,1478844752.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:32.170Z,1478844752.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:32.205Z,1478844752.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:32.565Z,1478844752.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:32.609Z,1478844752.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:32.969Z,1478844752.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:33.019Z,1478844753.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:33.365Z,1478844753.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:33.402Z,1478844753.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:33.765Z,1478844753.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:33.814Z,1478844753.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:34.164Z,1478844754.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:34.221Z,1478844754.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:34.565Z,1478844754.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:34.613Z,1478844754.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:34.965Z,1478844754.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:35.001Z,1478844755.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:35.370Z,1478844755.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:35.403Z,1478844755.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:35.765Z,1478844755.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:35.789Z,1478844755.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:36.172Z,1478844756.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:36.187Z,1478844756.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:36.572Z,1478844756.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:36.587Z,1478844756.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:36.973Z,1478844756.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:36.992Z,1478844756.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:37.373Z,1478844757.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:37.393Z,1478844757.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:37.765Z,1478844757.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:37.799Z,1478844757.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:38.165Z,1478844758.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:38.201Z,1478844758.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:38.565Z,1478844758.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:38.600Z,1478844758.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:38.965Z,1478844758.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:39.000Z,1478844759.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:39.365Z,1478844759.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:39.388Z,1478844759.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:39.765Z,1478844759.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:39.804Z,1478844759.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:40.165Z,1478844760.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:40.205Z,1478844760.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:40.565Z,1478844760.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:40.588Z,1478844760.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:40.965Z,1478844760.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:40.980Z,1478844760.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:41.373Z,1478844761.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:41.392Z,1478844761.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:41.772Z,1478844761.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:41.790Z,1478844761.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:42.171Z,1478844762.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:42.222Z,1478844762.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:42.569Z,1478844762.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:42.607Z,1478844762.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:42.972Z,1478844762.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:42.991Z,1478844762.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:43.377Z,1478844763.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:43.392Z,1478844763.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:43.777Z,1478844763.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:43.826Z,1478844763.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:44.176Z,1478844764.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:44.196Z,1478844764.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:44.565Z,1478844764.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:44.597Z,1478844764.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:44.966Z,1478844764.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:44.984Z,1478844764.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:45.369Z,1478844765.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:45.461Z,1478844765.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:45.768Z,1478844765.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:45.793Z,1478844765.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:46.168Z,1478844766.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:46.275Z,1478844766.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:46.575Z,1478844766.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:46.625Z,1478844766.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:46.972Z,1478844766.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:47.005Z,1478844767.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:47.381Z,1478844767.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:47.473Z,1478844767.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:47.765Z,1478844767.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:47.794Z,1478844767.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:48.167Z,1478844768.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:48.226Z,1478844768.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:48.565Z,1478844768.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:48.631Z,1478844768.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:48.965Z,1478844768.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:49.003Z,1478844769.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:49.365Z,1478844769.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:49.401Z,1478844769.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:49.771Z,1478844769.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:49.805Z,1478844769.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:50.165Z,1478844770.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:50.202Z,1478844770.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:50.565Z,1478844770.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:50.603Z,1478844770.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:50.974Z,1478844770.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:51.002Z,1478844771.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:51.367Z,1478844771.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:51.382Z,1478844771.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:51.770Z,1478844771.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:51.809Z,1478844771.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:52.180Z,1478844772.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:52.219Z,1478844772.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:52.571Z,1478844772.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:52.586Z,1478844772.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:52.976Z,1478844772.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:52.991Z,1478844772.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:53.373Z,1478844773.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:53.413Z,1478844773.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:53.765Z,1478844773.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:53.798Z,1478844773.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:54.167Z,1478844774.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:54.174Z,1478844774.174 [PNI_TCM](ERROR): CRC does not match. Expected:0x212 got:0x6336
2016-11-11T06:12:54.205Z,1478844774.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:54.568Z,1478844774.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:54.595Z,1478844774.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:54.965Z,1478844774.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:54.998Z,1478844774.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:55.379Z,1478844775.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:55.414Z,1478844775.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:55.771Z,1478844775.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:55.786Z,1478844775.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:56.172Z,1478844776.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:56.187Z,1478844776.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:56.572Z,1478844776.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:56.598Z,1478844776.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:56.971Z,1478844776.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:56.979Z,1478844776.979 [PNI_TCM](ERROR): CRC does not match. Expected:0x41044 got:0x14363
2016-11-11T06:12:57.020Z,1478844777.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:57.372Z,1478844777.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:57.401Z,1478844777.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:57.770Z,1478844777.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:57.785Z,1478844777.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:58.169Z,1478844778.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:58.205Z,1478844778.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:58.571Z,1478844778.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:58.578Z,1478844778.578 [PNI_TCM](ERROR): CRC does not match. Expected:0x12255 got:0x6591
2016-11-11T06:12:58.605Z,1478844778.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:58.972Z,1478844778.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:59.036Z,1478844779.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:59.371Z,1478844779.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:59.439Z,1478844779.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:12:59.769Z,1478844779.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:12:59.805Z,1478844779.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:00.167Z,1478844780.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:00.194Z,1478844780.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:00.567Z,1478844780.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:00.625Z,1478844780.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:00.966Z,1478844780.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:01.021Z,1478844781.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:01.365Z,1478844781.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:01.426Z,1478844781.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:01.775Z,1478844781.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:01.781Z,1478844781.781 [PNI_TCM](ERROR): CRC does not match. Expected:0x62611 got:0x3347
2016-11-11T06:13:01.817Z,1478844781.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:02.168Z,1478844782.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:02.217Z,1478844782.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:02.569Z,1478844782.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:02.584Z,1478844782.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:02.966Z,1478844782.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:03.036Z,1478844783.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:03.371Z,1478844783.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:03.429Z,1478844783.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:03.777Z,1478844783.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:03.823Z,1478844783.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:04.174Z,1478844784.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:04.222Z,1478844784.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:04.568Z,1478844784.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:04.606Z,1478844784.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:04.970Z,1478844784.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:05.042Z,1478844785.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:05.378Z,1478844785.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:05.410Z,1478844785.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:05.776Z,1478844785.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:05.804Z,1478844785.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:06.169Z,1478844786.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:06.221Z,1478844786.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:06.569Z,1478844786.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:06.625Z,1478844786.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:06.966Z,1478844786.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:07.025Z,1478844787.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:07.367Z,1478844787.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:07.421Z,1478844787.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:07.770Z,1478844787.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:07.809Z,1478844787.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:08.171Z,1478844788.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:08.252Z,1478844788.253 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:08.253Z,1478844788.253 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2016-11-11T06:13:08.253Z,1478844788.253 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:13:08.280Z,1478844788.280 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:08.280Z,1478844788.280 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2016-11-11T06:13:08.280Z,1478844788.280 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:13:08.324Z,1478844788.324 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:13:08.324Z,1478844788.324 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:13:08.566Z,1478844788.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:08.663Z,1478844788.663 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:13:08.663Z,1478844788.663 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2016-11-11T06:13:08.664Z,1478844788.664 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:13:08.664Z,1478844788.664 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2016-11-11T06:13:08.966Z,1478844788.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:09.058Z,1478844789.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:13:09.059Z,1478844789.059 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:13:09.076Z,1478844789.076 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:13:09.097Z,1478844789.097 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:13:09.097Z,1478844789.097 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:13:09.098Z,1478844789.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:13:09.368Z,1478844789.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:09.404Z,1478844789.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:09.776Z,1478844789.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:09.828Z,1478844789.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:10.174Z,1478844790.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:10.205Z,1478844790.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:10.574Z,1478844790.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:10.601Z,1478844790.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:10.969Z,1478844790.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:11.005Z,1478844791.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:11.383Z,1478844791.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:11.428Z,1478844791.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:11.772Z,1478844791.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:11.788Z,1478844791.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:12.176Z,1478844792.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:12.197Z,1478844792.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:12.594Z,1478844792.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:12.609Z,1478844792.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:12.616Z,1478844792.616 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:12.616Z,1478844792.616 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 9
2016-11-11T06:13:12.616Z,1478844792.616 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:13:12.655Z,1478844792.655 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:13:12.980Z,1478844792.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:13.016Z,1478844793.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:13.060Z,1478844793.059 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:13:13.060Z,1478844793.060 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 9
2016-11-11T06:13:13.373Z,1478844793.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:13.469Z,1478844793.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:13.475Z,1478844793.475 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:13:13.495Z,1478844793.495 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:13:13.496Z,1478844793.496 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:13:13.765Z,1478844793.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:13.805Z,1478844793.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:14.167Z,1478844794.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:14.225Z,1478844794.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:14.577Z,1478844794.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:14.604Z,1478844794.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:14.972Z,1478844794.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:15.023Z,1478844795.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:15.413Z,1478844795.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:15.525Z,1478844795.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:15.779Z,1478844795.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:15.822Z,1478844795.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:16.172Z,1478844796.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:16.209Z,1478844796.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:16.565Z,1478844796.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:16.597Z,1478844796.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:16.967Z,1478844796.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:17.068Z,1478844797.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:17.375Z,1478844797.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:17.421Z,1478844797.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:17.775Z,1478844797.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:17.806Z,1478844797.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:18.174Z,1478844798.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:18.209Z,1478844798.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:18.574Z,1478844798.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:18.605Z,1478844798.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:18.966Z,1478844798.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:19.063Z,1478844799.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:19.367Z,1478844799.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:19.409Z,1478844799.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:19.770Z,1478844799.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:19.819Z,1478844799.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:20.171Z,1478844800.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:20.221Z,1478844800.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:20.574Z,1478844800.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:20.625Z,1478844800.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:20.967Z,1478844800.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:21.065Z,1478844801.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:21.370Z,1478844801.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:21.393Z,1478844801.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:21.774Z,1478844801.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:21.826Z,1478844801.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:22.174Z,1478844802.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:22.205Z,1478844802.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:22.568Z,1478844802.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:22.622Z,1478844802.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:22.971Z,1478844802.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:23.052Z,1478844803.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:23.372Z,1478844803.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:23.391Z,1478844803.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:23.775Z,1478844803.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:23.799Z,1478844803.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:24.178Z,1478844804.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:24.202Z,1478844804.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:24.566Z,1478844804.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:24.617Z,1478844804.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:24.971Z,1478844804.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:25.089Z,1478844805.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:25.374Z,1478844805.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:25.422Z,1478844805.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:25.772Z,1478844805.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:25.787Z,1478844805.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:26.176Z,1478844806.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:26.192Z,1478844806.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:26.576Z,1478844806.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:26.597Z,1478844806.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:26.965Z,1478844806.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:26.000Z,1478844807.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:27.384Z,1478844807.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:27.428Z,1478844807.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:27.765Z,1478844807.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:27.800Z,1478844807.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:28.165Z,1478844808.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:28.192Z,1478844808.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:28.565Z,1478844808.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:28.581Z,1478844808.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:31.984Z,1478844811.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:32.062Z,1478844812.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:32.159Z,1478844812.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:32.182Z,1478844812.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:32.545Z,1478844812.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:32.578Z,1478844812.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:32.945Z,1478844812.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:33.025Z,1478844813.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:33.349Z,1478844813.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:33.375Z,1478844813.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:33.745Z,1478844813.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:33.793Z,1478844813.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:34.149Z,1478844814.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:34.174Z,1478844814.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:34.544Z,1478844814.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:34.589Z,1478844814.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:34.945Z,1478844814.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:35.017Z,1478844815.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:35.352Z,1478844815.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:35.366Z,1478844815.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:35.748Z,1478844815.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:35.777Z,1478844815.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:36.152Z,1478844816.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:36.171Z,1478844816.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:36.552Z,1478844816.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:36.567Z,1478844816.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:36.949Z,1478844816.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:37.099Z,1478844817.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:37.356Z,1478844817.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:37.371Z,1478844817.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:37.753Z,1478844817.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:37.768Z,1478844817.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:38.156Z,1478844818.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:38.172Z,1478844818.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:38.553Z,1478844818.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:38.573Z,1478844818.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:38.955Z,1478844818.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:38.973Z,1478844818.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:39.353Z,1478844819.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:39.386Z,1478844819.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:39.745Z,1478844819.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:39.785Z,1478844819.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:40.146Z,1478844820.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:40.181Z,1478844820.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:40.548Z,1478844820.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:40.572Z,1478844820.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:40.953Z,1478844820.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:40.973Z,1478844820.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:41.365Z,1478844821.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:41.410Z,1478844821.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:41.745Z,1478844821.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:41.777Z,1478844821.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:42.153Z,1478844822.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:42.180Z,1478844822.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:42.552Z,1478844822.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:42.573Z,1478844822.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:42.948Z,1478844822.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:42.981Z,1478844822.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:43.378Z,1478844823.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:43.421Z,1478844823.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:43.749Z,1478844823.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:43.775Z,1478844823.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:44.145Z,1478844824.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:44.178Z,1478844824.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:44.545Z,1478844824.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:44.570Z,1478844824.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:44.965Z,1478844824.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:45.031Z,1478844825.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:45.349Z,1478844825.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:45.375Z,1478844825.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:45.753Z,1478844825.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:45.785Z,1478844825.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:46.145Z,1478844826.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:46.214Z,1478844826.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:46.545Z,1478844826.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:46.617Z,1478844826.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:46.977Z,1478844826.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:47.029Z,1478844827.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:47.345Z,1478844827.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:47.401Z,1478844827.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:47.751Z,1478844827.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:47.770Z,1478844827.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:48.153Z,1478844828.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:48.209Z,1478844828.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:48.553Z,1478844828.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:48.610Z,1478844828.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:48.963Z,1478844828.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:49.023Z,1478844829.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:49.345Z,1478844829.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:49.380Z,1478844829.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:49.745Z,1478844829.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:49.778Z,1478844829.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:50.145Z,1478844830.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:50.170Z,1478844830.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:50.545Z,1478844830.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:50.577Z,1478844830.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:50.971Z,1478844830.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:51.023Z,1478844831.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:51.345Z,1478844831.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:51.381Z,1478844831.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:51.745Z,1478844831.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:51.780Z,1478844831.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:52.145Z,1478844832.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:52.180Z,1478844832.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:52.545Z,1478844832.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:52.601Z,1478844832.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:52.945Z,1478844832.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:52.965Z,1478844832.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:53.351Z,1478844833.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:53.373Z,1478844833.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:53.745Z,1478844833.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:53.772Z,1478844833.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:54.145Z,1478844834.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:54.178Z,1478844834.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:54.545Z,1478844834.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:54.577Z,1478844834.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:54.945Z,1478844834.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:54.977Z,1478844834.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:55.365Z,1478844835.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:55.396Z,1478844835.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:55.745Z,1478844835.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:55.777Z,1478844835.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:56.145Z,1478844836.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:56.216Z,1478844836.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:56.545Z,1478844836.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:56.581Z,1478844836.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:56.945Z,1478844836.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:56.981Z,1478844836.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:57.377Z,1478844837.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:57.402Z,1478844837.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:57.753Z,1478844837.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:57.793Z,1478844837.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:58.148Z,1478844838.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:58.169Z,1478844838.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:58.551Z,1478844838.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:58.566Z,1478844838.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:59.003Z,1478844839.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:59.058Z,1478844839.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:59.348Z,1478844839.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:59.376Z,1478844839.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:13:59.752Z,1478844839.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:13:59.767Z,1478844839.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:00.153Z,1478844840.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:00.177Z,1478844840.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:00.545Z,1478844840.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:00.617Z,1478844840.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:00.981Z,1478844840.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:01.007Z,1478844841.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:01.350Z,1478844841.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:01.485Z,1478844841.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:01.749Z,1478844841.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:01.769Z,1478844841.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:02.149Z,1478844842.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:02.199Z,1478844842.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:02.557Z,1478844842.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:02.606Z,1478844842.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:02.990Z,1478844842.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:03.017Z,1478844843.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:03.352Z,1478844843.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:03.368Z,1478844843.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:03.747Z,1478844843.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:03.778Z,1478844843.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:04.149Z,1478844844.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:04.176Z,1478844844.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:04.556Z,1478844844.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:04.571Z,1478844844.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:04.964Z,1478844844.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:05.042Z,1478844845.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:05.345Z,1478844845.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:05.380Z,1478844845.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:05.745Z,1478844845.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:05.768Z,1478844845.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:06.145Z,1478844846.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:06.181Z,1478844846.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:06.545Z,1478844846.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:06.572Z,1478844846.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:06.945Z,1478844846.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:07.014Z,1478844847.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:07.353Z,1478844847.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:07.368Z,1478844847.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:07.751Z,1478844847.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:07.766Z,1478844847.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:08.152Z,1478844848.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:08.167Z,1478844848.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:08.556Z,1478844848.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:08.580Z,1478844848.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:08.953Z,1478844848.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:08.973Z,1478844848.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:09.356Z,1478844849.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:09.412Z,1478844849.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:09.760Z,1478844849.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:09.779Z,1478844849.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:10.153Z,1478844850.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:10.185Z,1478844850.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:10.545Z,1478844850.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:10.577Z,1478844850.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:10.945Z,1478844850.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:10.981Z,1478844850.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:11.349Z,1478844851.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:11.393Z,1478844851.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:11.745Z,1478844851.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:11.781Z,1478844851.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:12.149Z,1478844852.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:12.185Z,1478844852.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:12.545Z,1478844852.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:12.565Z,1478844852.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:12.978Z,1478844852.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:13.019Z,1478844853.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:13.353Z,1478844853.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:13.368Z,1478844853.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:13.752Z,1478844853.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:13.767Z,1478844853.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:14.152Z,1478844854.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:14.213Z,1478844854.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:14.552Z,1478844854.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:14.617Z,1478844854.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:14.954Z,1478844854.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:15.003Z,1478844855.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:15.345Z,1478844855.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:15.410Z,1478844855.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:15.745Z,1478844855.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:15.777Z,1478844855.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:16.145Z,1478844856.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:16.194Z,1478844856.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:16.545Z,1478844856.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:16.577Z,1478844856.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:16.972Z,1478844856.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:17.024Z,1478844857.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:17.345Z,1478844857.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:17.381Z,1478844857.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:17.745Z,1478844857.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:17.781Z,1478844857.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:18.149Z,1478844858.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:18.185Z,1478844858.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:18.545Z,1478844858.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:18.589Z,1478844858.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:18.983Z,1478844858.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:19.012Z,1478844859.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:19.353Z,1478844859.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:19.380Z,1478844859.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:19.745Z,1478844859.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:19.765Z,1478844859.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:20.149Z,1478844860.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:20.164Z,1478844860.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:20.553Z,1478844860.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:20.573Z,1478844860.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:20.960Z,1478844860.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:21.017Z,1478844861.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:21.352Z,1478844861.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:21.368Z,1478844861.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:21.752Z,1478844861.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:21.768Z,1478844861.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:22.153Z,1478844862.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:22.173Z,1478844862.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:22.552Z,1478844862.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:22.568Z,1478844862.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:22.952Z,1478844862.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:22.970Z,1478844862.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:23.353Z,1478844863.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:23.401Z,1478844863.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:23.753Z,1478844863.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:23.769Z,1478844863.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:24.156Z,1478844864.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:24.171Z,1478844864.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:24.552Z,1478844864.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:24.577Z,1478844864.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:24.957Z,1478844864.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:24.973Z,1478844864.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:25.347Z,1478844865.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:25.386Z,1478844865.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:25.746Z,1478844865.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:25.780Z,1478844865.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:26.145Z,1478844866.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:26.176Z,1478844866.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:26.545Z,1478844866.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:26.560Z,1478844866.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:26.966Z,1478844866.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:27.002Z,1478844867.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:27.353Z,1478844867.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:27.389Z,1478844867.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:27.749Z,1478844867.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:27.769Z,1478844867.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:27.804Z,1478844867.804 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T06:14:27.804Z,1478844867.805 [Default:CheckIn:C.Wait] Stopped
2016-11-11T06:14:27.805Z,1478844867.805 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T06:14:27.805Z,1478844867.805 [Default:CheckIn:D] Running Loop=1
2016-11-11T06:14:28.153Z,1478844868.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:28.168Z,1478844868.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:28.201Z,1478844868.201 [Default:CheckIn:D] Stopped
2016-11-11T06:14:28.201Z,1478844868.201 [Default:CheckIn:E] Running Loop=1
2016-11-11T06:14:28.554Z,1478844868.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:28.605Z,1478844868.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:28.619Z,1478844868.619 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 84.448185 min 
2016-11-11T06:14:28.619Z,1478844868.619 [Default:CheckIn:E] Stopped
2016-11-11T06:14:28.623Z,1478844868.623 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T06:14:28.623Z,1478844868.623 [Default:CheckIn] Stopped
2016-11-11T06:14:28.623Z,1478844868.623 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T06:14:28.624Z,1478844868.624 [Default:CheckIn](INFO): Running loop #9
2016-11-11T06:14:28.624Z,1478844868.624 [Default:CheckIn] Running Loop=9
2016-11-11T06:14:28.624Z,1478844868.624 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T06:14:28.624Z,1478844868.624 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T06:14:28.961Z,1478844868.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:29.021Z,1478844869.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:32.380Z,1478844872.380 [NAL9602](INFO): Powering up
2016-11-11T06:14:32.408Z,1478844872.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:32.426Z,1478844872.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:32.525Z,1478844872.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:32.546Z,1478844872.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:32.929Z,1478844872.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:32.981Z,1478844872.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:33.302Z,1478844873.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:33.357Z,1478844873.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:33.703Z,1478844873.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:33.730Z,1478844873.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:34.102Z,1478844874.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:34.150Z,1478844874.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:34.502Z,1478844874.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:34.546Z,1478844874.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:34.902Z,1478844874.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:34.917Z,1478844874.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:35.309Z,1478844875.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:35.333Z,1478844875.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:35.710Z,1478844875.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:35.725Z,1478844875.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:36.111Z,1478844876.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:36.126Z,1478844876.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:36.514Z,1478844876.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:36.530Z,1478844876.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:36.910Z,1478844876.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:36.925Z,1478844876.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:37.316Z,1478844877.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:37.336Z,1478844877.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:37.719Z,1478844877.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:37.734Z,1478844877.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:38.102Z,1478844878.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:38.138Z,1478844878.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:38.502Z,1478844878.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:38.530Z,1478844878.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:38.903Z,1478844878.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:38.918Z,1478844878.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:39.313Z,1478844879.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:39.352Z,1478844879.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:39.703Z,1478844879.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:39.718Z,1478844879.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:40.107Z,1478844880.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:40.122Z,1478844880.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:40.509Z,1478844880.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:40.524Z,1478844880.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:40.916Z,1478844880.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:40.968Z,1478844880.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:41.311Z,1478844881.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:41.329Z,1478844881.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:41.713Z,1478844881.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:41.729Z,1478844881.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:42.132Z,1478844882.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:42.176Z,1478844882.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:42.533Z,1478844882.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:42.561Z,1478844882.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:42.944Z,1478844882.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:42.993Z,1478844882.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:43.296Z,1478844883.296 [NAL9602](INFO): NAL9602 initialized
2016-11-11T06:14:43.313Z,1478844883.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:43.353Z,1478844883.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:43.713Z,1478844883.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:43.748Z,1478844883.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:44.085Z,1478844884.085 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T06:14:44.085Z,1478844884.085 [NAL9602] Data Fault, FailCount= 1
2016-11-11T06:14:44.085Z,1478844884.085 [NAL9602](ERROR): Data Fault
2016-11-11T06:14:44.112Z,1478844884.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:44.139Z,1478844884.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:44.186Z,1478844884.186 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T06:14:44.491Z,1478844884.490 [NAL9602](INFO): Powering down
2016-11-11T06:14:44.512Z,1478844884.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:44.540Z,1478844884.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:44.929Z,1478844884.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:44.970Z,1478844884.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:45.316Z,1478844885.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:45.342Z,1478844885.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:45.386Z,1478844885.386 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T06:14:45.386Z,1478844885.386 [NAL9602] No Fault, FailCount= 1
2016-11-11T06:14:45.722Z,1478844885.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:45.737Z,1478844885.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:46.123Z,1478844886.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:46.205Z,1478844886.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:46.501Z,1478844886.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:46.521Z,1478844886.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:46.927Z,1478844886.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:47.006Z,1478844887.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:47.321Z,1478844887.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:47.348Z,1478844887.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:47.721Z,1478844887.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:47.746Z,1478844887.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:48.101Z,1478844888.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:48.153Z,1478844888.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:48.503Z,1478844888.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:48.518Z,1478844888.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:48.912Z,1478844888.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:48.999Z,1478844888.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:49.308Z,1478844889.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:49.343Z,1478844889.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:49.693Z,1478844889.693 [NAL9602](INFO): Powering up NAL9602
2016-11-11T06:14:49.710Z,1478844889.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:49.757Z,1478844889.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:50.110Z,1478844890.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:50.125Z,1478844890.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:50.509Z,1478844890.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:50.524Z,1478844890.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:50.911Z,1478844890.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:50.926Z,1478844890.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:51.314Z,1478844891.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:51.329Z,1478844891.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:51.711Z,1478844891.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:51.727Z,1478844891.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:52.115Z,1478844892.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:52.130Z,1478844892.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:52.502Z,1478844892.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:52.537Z,1478844892.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:52.902Z,1478844892.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:52.942Z,1478844892.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:53.307Z,1478844893.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:53.333Z,1478844893.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:53.702Z,1478844893.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:53.737Z,1478844893.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:54.101Z,1478844894.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:54.137Z,1478844894.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:54.503Z,1478844894.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:54.538Z,1478844894.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:54.936Z,1478844894.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:54.956Z,1478844894.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:55.304Z,1478844895.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:55.335Z,1478844895.335 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T06:14:55.335Z,1478844895.335 [Rowe_600LCM] Communications Fault, FailCount= 3
2016-11-11T06:14:55.335Z,1478844895.335 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T06:14:55.343Z,1478844895.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:55.379Z,1478844895.379 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T06:14:55.708Z,1478844895.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:55.733Z,1478844895.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T06:14:55.734Z,1478844895.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:55.739Z,1478844895.739 [Rowe_600LCM](INFO): Powering down
2016-11-11T06:14:56.109Z,1478844896.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:56.128Z,1478844896.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T06:14:56.129Z,1478844896.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:56.511Z,1478844896.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:56.526Z,1478844896.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:14:56.527Z,1478844896.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:56.909Z,1478844896.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:56.929Z,1478844896.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:14:56.930Z,1478844896.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:56.962Z,1478844896.962 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T06:14:56.962Z,1478844896.962 [Rowe_600LCM] No Fault, FailCount= 3
2016-11-11T06:14:57.305Z,1478844897.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:57.337Z,1478844897.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:14:57.338Z,1478844897.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:57.355Z,1478844897.355 [Rowe_600LCM](INFO): Initializing
2016-11-11T06:14:57.356Z,1478844897.356 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T06:14:57.356Z,1478844897.356 [Rowe_600LCM](INFO): LCM OK
2016-11-11T06:14:57.356Z,1478844897.356 [Rowe_600LCM](INFO): Powering up
2016-11-11T06:14:57.707Z,1478844897.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:57.743Z,1478844897.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T06:14:57.744Z,1478844897.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:58.102Z,1478844898.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:58.138Z,1478844898.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T06:14:58.140Z,1478844898.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:58.511Z,1478844898.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:58.544Z,1478844898.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T06:14:58.545Z,1478844898.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:58.929Z,1478844898.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:58.977Z,1478844898.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2016-11-11T06:14:58.978Z,1478844898.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:59.306Z,1478844899.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:59.352Z,1478844899.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T06:14:59.353Z,1478844899.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:14:59.712Z,1478844899.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:14:59.737Z,1478844899.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T06:14:59.738Z,1478844899.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:00.109Z,1478844900.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:00.140Z,1478844900.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T06:15:00.141Z,1478844900.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:00.512Z,1478844900.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:00.543Z,1478844900.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T06:15:00.544Z,1478844900.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:00.896Z,1478844900.896 [NAL9602](INFO): NAL9602 initialized
2016-11-11T06:15:00.913Z,1478844900.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:00.943Z,1478844900.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T06:15:00.945Z,1478844900.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:01.315Z,1478844901.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:01.330Z,1478844901.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T06:15:01.331Z,1478844901.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:01.499Z,1478844901.499 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T06:15:01.556Z,1478844901.556 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T06:15:01.557Z,1478844901.557 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T06:15:01.558Z,1478844901.558 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T06:15:01.559Z,1478844901.559 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T06:15:01.731Z,1478844901.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:01.806Z,1478844901.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2016-11-11T06:15:01.808Z,1478844901.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:02.134Z,1478844902.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:02.179Z,1478844902.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:02.523Z,1478844902.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:02.544Z,1478844902.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:02.930Z,1478844902.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:02.985Z,1478844902.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:03.307Z,1478844903.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:03.333Z,1478844903.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:03.724Z,1478844903.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:03.774Z,1478844903.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:04.112Z,1478844904.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:04.139Z,1478844904.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:04.533Z,1478844904.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:04.591Z,1478844904.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:04.908Z,1478844904.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:04.932Z,1478844904.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:05.308Z,1478844905.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:05.337Z,1478844905.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:05.714Z,1478844905.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:05.729Z,1478844905.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:06.120Z,1478844906.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:06.136Z,1478844906.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:06.508Z,1478844906.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:06.536Z,1478844906.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:06.903Z,1478844906.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:06.953Z,1478844906.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:07.303Z,1478844907.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:07.326Z,1478844907.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:07.703Z,1478844907.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:07.718Z,1478844907.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:08.119Z,1478844908.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:08.145Z,1478844908.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:08.516Z,1478844908.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:08.549Z,1478844908.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:08.912Z,1478844908.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:08.936Z,1478844908.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:09.306Z,1478844909.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:09.322Z,1478844909.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:09.707Z,1478844909.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:09.722Z,1478844909.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:10.112Z,1478844910.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:10.128Z,1478844910.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:10.515Z,1478844910.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:10.530Z,1478844910.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:10.910Z,1478844910.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:10.937Z,1478844910.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:11.307Z,1478844911.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:11.329Z,1478844911.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:11.713Z,1478844911.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:11.737Z,1478844911.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:12.125Z,1478844912.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:12.145Z,1478844912.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:12.503Z,1478844912.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:12.537Z,1478844912.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:12.928Z,1478844912.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:12.944Z,1478844912.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:13.325Z,1478844913.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:13.341Z,1478844913.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:13.703Z,1478844913.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:13.719Z,1478844913.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:14.116Z,1478844914.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:14.149Z,1478844914.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:14.503Z,1478844914.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:14.518Z,1478844914.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:14.907Z,1478844914.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:14.945Z,1478844914.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:15.311Z,1478844915.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:15.326Z,1478844915.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:15.733Z,1478844915.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:15.773Z,1478844915.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:16.130Z,1478844916.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:16.171Z,1478844916.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:16.513Z,1478844916.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:16.589Z,1478844916.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:16.910Z,1478844916.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:16.925Z,1478844916.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:17.320Z,1478844917.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:17.373Z,1478844917.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:17.724Z,1478844917.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:17.739Z,1478844917.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:18.124Z,1478844918.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:18.213Z,1478844918.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:18.516Z,1478844918.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:18.567Z,1478844918.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:18.922Z,1478844918.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:18.937Z,1478844918.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:19.320Z,1478844919.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:19.335Z,1478844919.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:19.732Z,1478844919.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:19.777Z,1478844919.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:20.106Z,1478844920.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:20.141Z,1478844920.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:20.508Z,1478844920.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:20.534Z,1478844920.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:20.922Z,1478844920.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:20.938Z,1478844920.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:21.321Z,1478844921.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:21.344Z,1478844921.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:21.702Z,1478844921.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:21.734Z,1478844921.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:22.116Z,1478844922.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:22.131Z,1478844922.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:22.532Z,1478844922.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:22.557Z,1478844922.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:22.910Z,1478844922.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:22.925Z,1478844922.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:23.308Z,1478844923.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:23.336Z,1478844923.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:23.719Z,1478844923.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:23.734Z,1478844923.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:24.103Z,1478844924.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:24.118Z,1478844924.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:24.512Z,1478844924.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:24.543Z,1478844924.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:24.904Z,1478844924.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:24.925Z,1478844924.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:25.307Z,1478844925.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:25.322Z,1478844925.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:25.711Z,1478844925.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:25.733Z,1478844925.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:26.132Z,1478844926.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:26.168Z,1478844926.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:26.527Z,1478844926.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:26.543Z,1478844926.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:26.903Z,1478844926.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:26.930Z,1478844926.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:27.303Z,1478844927.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:27.319Z,1478844927.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:27.703Z,1478844927.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:27.719Z,1478844927.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:28.108Z,1478844928.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:28.133Z,1478844928.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:28.509Z,1478844928.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:28.537Z,1478844928.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:28.903Z,1478844928.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:28.942Z,1478844928.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:29.304Z,1478844929.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:29.340Z,1478844929.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:32.902Z,1478844932.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:33.009Z,1478844933.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:33.106Z,1478844933.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:33.149Z,1478844933.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:33.474Z,1478844933.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:33.506Z,1478844933.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:33.870Z,1478844933.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:33.921Z,1478844933.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:34.273Z,1478844934.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:34.311Z,1478844934.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:34.696Z,1478844934.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:34.751Z,1478844934.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:35.084Z,1478844935.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:35.156Z,1478844935.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:35.470Z,1478844935.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:35.486Z,1478844935.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:35.877Z,1478844935.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:35.917Z,1478844935.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:36.274Z,1478844936.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:36.309Z,1478844936.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:36.670Z,1478844936.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:36.686Z,1478844936.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:37.077Z,1478844937.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:37.097Z,1478844937.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:37.477Z,1478844937.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:37.494Z,1478844937.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:37.874Z,1478844937.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:37.898Z,1478844937.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:38.280Z,1478844938.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:38.296Z,1478844938.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:38.678Z,1478844938.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:38.693Z,1478844938.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:39.089Z,1478844939.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:39.113Z,1478844939.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:39.490Z,1478844939.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:39.540Z,1478844939.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:39.880Z,1478844939.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:39.922Z,1478844939.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:40.270Z,1478844940.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:40.296Z,1478844940.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:40.669Z,1478844940.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:40.707Z,1478844940.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:41.070Z,1478844941.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:41.097Z,1478844941.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:41.469Z,1478844941.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:41.502Z,1478844941.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:41.897Z,1478844941.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:41.914Z,1478844941.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:42.274Z,1478844942.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:42.314Z,1478844942.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:42.669Z,1478844942.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:42.700Z,1478844942.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:43.078Z,1478844943.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:43.108Z,1478844943.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:43.491Z,1478844943.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:43.514Z,1478844943.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:43.901Z,1478844943.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:43.937Z,1478844943.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:44.277Z,1478844944.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:44.318Z,1478844944.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:44.677Z,1478844944.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:44.692Z,1478844944.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:45.078Z,1478844945.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:45.112Z,1478844945.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:45.473Z,1478844945.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:45.502Z,1478844945.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:45.878Z,1478844945.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:45.910Z,1478844945.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:46.276Z,1478844946.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:46.292Z,1478844946.292 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T06:15:46.292Z,1478844946.292 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:15:46.292Z,1478844946.292 [BPC1](ERROR): Data Fault
2016-11-11T06:15:46.303Z,1478844946.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:46.356Z,1478844946.356 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:15:46.596Z,1478844946.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:46.672Z,1478844946.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:46.707Z,1478844946.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:47.075Z,1478844947.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:47.105Z,1478844947.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:47.392Z,1478844947.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:47.471Z,1478844947.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:47.516Z,1478844947.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:47.560Z,1478844947.560 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:15:47.560Z,1478844947.560 [BPC1] No Fault, FailCount= 1
2016-11-11T06:15:47.561Z,1478844947.561 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T06:15:47.888Z,1478844947.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:47.969Z,1478844947.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:48.280Z,1478844948.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:48.344Z,1478844948.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:48.681Z,1478844948.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:48.709Z,1478844948.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:49.078Z,1478844949.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:49.121Z,1478844949.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:49.470Z,1478844949.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:49.510Z,1478844949.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:49.869Z,1478844949.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:49.893Z,1478844949.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:50.280Z,1478844950.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:50.296Z,1478844950.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:50.677Z,1478844950.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:50.725Z,1478844950.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:51.073Z,1478844951.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:51.098Z,1478844951.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:51.475Z,1478844951.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:51.502Z,1478844951.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:51.879Z,1478844951.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:51.894Z,1478844951.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:52.284Z,1478844952.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:52.314Z,1478844952.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:52.687Z,1478844952.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:52.705Z,1478844952.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:53.069Z,1478844953.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:53.108Z,1478844953.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:53.471Z,1478844953.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:53.498Z,1478844953.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:53.869Z,1478844953.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:53.905Z,1478844953.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:54.277Z,1478844954.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:54.306Z,1478844954.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:54.669Z,1478844954.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:54.708Z,1478844954.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:55.070Z,1478844955.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:55.112Z,1478844955.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:55.470Z,1478844955.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:55.504Z,1478844955.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:55.878Z,1478844955.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:55.907Z,1478844955.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:56.278Z,1478844956.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:56.311Z,1478844956.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:56.672Z,1478844956.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:56.713Z,1478844956.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:57.074Z,1478844957.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:57.115Z,1478844957.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:57.469Z,1478844957.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:57.516Z,1478844957.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:57.896Z,1478844957.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:57.929Z,1478844957.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:58.280Z,1478844958.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:58.315Z,1478844958.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:58.677Z,1478844958.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:58.714Z,1478844958.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:59.077Z,1478844959.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:59.112Z,1478844959.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:59.475Z,1478844959.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:59.491Z,1478844959.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:15:59.875Z,1478844959.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:15:59.890Z,1478844959.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:00.281Z,1478844960.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:00.353Z,1478844960.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:00.686Z,1478844960.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:00.693Z,1478844960.693 [PNI_TCM](ERROR): CRC does not match. Expected:0x37608 got:0x6978
2016-11-11T06:16:00.741Z,1478844960.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:01.090Z,1478844961.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:01.105Z,1478844961.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:01.471Z,1478844961.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:01.506Z,1478844961.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:01.881Z,1478844961.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:01.941Z,1478844961.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:02.288Z,1478844962.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:02.295Z,1478844962.295 [PNI_TCM](ERROR): CRC does not match. Expected:0x10578 got:0x16913
2016-11-11T06:16:02.321Z,1478844962.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:02.672Z,1478844962.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:02.722Z,1478844962.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:03.071Z,1478844963.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:03.125Z,1478844963.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:03.469Z,1478844963.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:03.509Z,1478844963.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:03.879Z,1478844963.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:03.917Z,1478844963.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:04.280Z,1478844964.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:04.314Z,1478844964.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:04.671Z,1478844964.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:04.702Z,1478844964.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:05.086Z,1478844965.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:05.122Z,1478844965.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:05.482Z,1478844965.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:05.517Z,1478844965.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:05.871Z,1478844965.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:05.909Z,1478844965.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:06.278Z,1478844966.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:06.313Z,1478844966.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:06.672Z,1478844966.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:06.710Z,1478844966.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:07.072Z,1478844967.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:07.079Z,1478844967.079 [PNI_TCM](ERROR): CRC does not match. Expected:0x43418 got:0x56860
2016-11-11T06:16:07.105Z,1478844967.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:07.484Z,1478844967.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:07.499Z,1478844967.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:07.874Z,1478844967.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:07.898Z,1478844967.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:08.276Z,1478844968.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:08.297Z,1478844968.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:08.682Z,1478844968.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:08.708Z,1478844968.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:09.076Z,1478844969.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:09.097Z,1478844969.097 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:09.097Z,1478844969.098 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2016-11-11T06:16:09.098Z,1478844969.098 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:16:09.104Z,1478844969.104 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:09.104Z,1478844969.104 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2016-11-11T06:16:09.104Z,1478844969.104 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:16:09.132Z,1478844969.132 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:16:09.132Z,1478844969.132 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:16:09.487Z,1478844969.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:09.526Z,1478844969.526 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:16:09.526Z,1478844969.526 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2016-11-11T06:16:09.526Z,1478844969.526 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:16:09.527Z,1478844969.527 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2016-11-11T06:16:09.900Z,1478844969.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:09.914Z,1478844969.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:16:09.915Z,1478844969.915 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:16:09.916Z,1478844969.916 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:16:09.920Z,1478844969.920 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:16:09.921Z,1478844969.921 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:16:09.921Z,1478844969.921 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:16:10.280Z,1478844970.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:10.313Z,1478844970.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:10.675Z,1478844970.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:10.702Z,1478844970.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:11.074Z,1478844971.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:11.090Z,1478844971.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:11.470Z,1478844971.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:11.488Z,1478844971.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:11.871Z,1478844971.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:11.893Z,1478844971.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:12.282Z,1478844972.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:12.298Z,1478844972.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:12.672Z,1478844972.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:12.700Z,1478844972.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:13.084Z,1478844973.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:13.099Z,1478844973.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:13.475Z,1478844973.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:13.498Z,1478844973.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:13.505Z,1478844973.505 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:13.505Z,1478844973.505 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 10
2016-11-11T06:16:13.505Z,1478844973.505 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:16:13.528Z,1478844973.528 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:16:13.870Z,1478844973.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:13.905Z,1478844973.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:13.932Z,1478844973.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:16:13.933Z,1478844973.932 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 10
2016-11-11T06:16:14.269Z,1478844974.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:14.295Z,1478844974.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:14.301Z,1478844974.301 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:16:14.301Z,1478844974.301 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:16:14.301Z,1478844974.301 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:16:14.684Z,1478844974.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:14.713Z,1478844974.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:15.072Z,1478844975.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:15.133Z,1478844975.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:15.469Z,1478844975.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:15.484Z,1478844975.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:15.870Z,1478844975.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:15.889Z,1478844975.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:16.271Z,1478844976.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:16.286Z,1478844976.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:16.675Z,1478844976.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:16.703Z,1478844976.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:17.074Z,1478844977.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:17.102Z,1478844977.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:17.476Z,1478844977.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:17.492Z,1478844977.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:17.885Z,1478844977.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:17.905Z,1478844977.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:18.288Z,1478844978.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:18.297Z,1478844978.297 [BPC1](ERROR): Failed to receive battery data
2016-11-11T06:16:18.297Z,1478844978.297 [BPC1] Communications Fault, FailCount= 1
2016-11-11T06:16:18.297Z,1478844978.297 [BPC1](ERROR): Communications Fault
2016-11-11T06:16:18.309Z,1478844978.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:18.358Z,1478844978.358 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T06:16:18.669Z,1478844978.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:18.701Z,1478844978.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:19.069Z,1478844979.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:19.103Z,1478844979.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:19.485Z,1478844979.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:19.500Z,1478844979.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:19.520Z,1478844979.520 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:16:19.520Z,1478844979.520 [BPC1] No Fault, FailCount= 1
2016-11-11T06:16:19.871Z,1478844979.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:19.949Z,1478844979.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:20.269Z,1478844980.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:20.325Z,1478844980.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:20.674Z,1478844980.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:20.702Z,1478844980.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:21.072Z,1478844981.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:21.104Z,1478844981.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:21.469Z,1478844981.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:21.513Z,1478844981.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:21.869Z,1478844981.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:21.905Z,1478844981.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:22.300Z,1478844982.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:22.316Z,1478844982.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:22.688Z,1478844982.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:22.721Z,1478844982.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:23.074Z,1478844983.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:23.089Z,1478844983.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:23.469Z,1478844983.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:23.489Z,1478844983.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:23.882Z,1478844983.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:23.923Z,1478844983.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:24.281Z,1478844984.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:24.309Z,1478844984.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:24.677Z,1478844984.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:24.697Z,1478844984.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:25.077Z,1478844985.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:25.137Z,1478844985.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:25.469Z,1478844985.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:25.509Z,1478844985.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:25.870Z,1478844985.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:25.902Z,1478844985.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:26.277Z,1478844986.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:26.318Z,1478844986.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:26.669Z,1478844986.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:26.713Z,1478844986.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:27.069Z,1478844987.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:27.118Z,1478844987.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:27.473Z,1478844987.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:27.526Z,1478844987.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:27.883Z,1478844987.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:27.919Z,1478844987.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:28.288Z,1478844988.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:28.314Z,1478844988.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:28.677Z,1478844988.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:28.713Z,1478844988.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:29.070Z,1478844989.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:29.089Z,1478844989.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:29.474Z,1478844989.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:29.493Z,1478844989.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:32.919Z,1478844992.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:32.935Z,1478844992.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:33.041Z,1478844993.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:33.060Z,1478844993.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:33.433Z,1478844993.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:33.448Z,1478844993.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:33.839Z,1478844993.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:33.855Z,1478844993.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:34.239Z,1478844994.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:34.261Z,1478844994.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:34.637Z,1478844994.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:34.657Z,1478844994.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:35.034Z,1478844995.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:35.069Z,1478844995.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:35.431Z,1478844995.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:35.460Z,1478844995.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:35.827Z,1478844995.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:35.857Z,1478844995.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:36.235Z,1478844996.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:36.270Z,1478844996.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:36.626Z,1478844996.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:36.642Z,1478844996.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:37.025Z,1478844997.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:37.065Z,1478844997.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:37.443Z,1478844997.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:37.459Z,1478844997.459 [PNI_TCM](ERROR): CRC does not match. Expected:0x35244 got:0x7490
2016-11-11T06:16:37.485Z,1478844997.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:37.834Z,1478844997.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:37.850Z,1478844997.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:38.229Z,1478844998.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:38.281Z,1478844998.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:38.635Z,1478844998.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:38.650Z,1478844998.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:39.036Z,1478844999.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:39.051Z,1478844999.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:39.440Z,1478844999.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:39.501Z,1478844999.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:39.842Z,1478844999.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:39.857Z,1478844999.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:40.238Z,1478845000.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:40.262Z,1478845000.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:40.628Z,1478845000.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:40.690Z,1478845000.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:41.027Z,1478845001.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:41.057Z,1478845001.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:41.426Z,1478845001.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:41.496Z,1478845001.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:41.827Z,1478845001.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:41.878Z,1478845001.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:42.239Z,1478845002.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:42.262Z,1478845002.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:42.630Z,1478845002.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:42.655Z,1478845002.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:43.025Z,1478845003.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:43.059Z,1478845003.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:43.428Z,1478845003.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:43.476Z,1478845003.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:43.852Z,1478845003.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:43.867Z,1478845003.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:44.236Z,1478845004.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:44.262Z,1478845004.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:44.625Z,1478845004.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:44.661Z,1478845004.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:45.028Z,1478845005.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:45.059Z,1478845005.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:45.427Z,1478845005.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:45.442Z,1478845005.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:45.830Z,1478845005.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:45.855Z,1478845005.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:46.234Z,1478845006.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:46.249Z,1478845006.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:46.633Z,1478845006.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:46.661Z,1478845006.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:47.035Z,1478845007.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:47.050Z,1478845007.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:47.433Z,1478845007.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:47.455Z,1478845007.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:47.841Z,1478845007.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:47.861Z,1478845007.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:48.251Z,1478845008.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:48.266Z,1478845008.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:48.647Z,1478845008.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:48.663Z,1478845008.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:49.025Z,1478845009.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:49.057Z,1478845009.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:49.425Z,1478845009.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:49.462Z,1478845009.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:49.835Z,1478845009.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:49.860Z,1478845009.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:50.225Z,1478845010.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:50.257Z,1478845010.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:50.626Z,1478845010.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:50.658Z,1478845010.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:51.025Z,1478845011.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:51.057Z,1478845011.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:51.431Z,1478845011.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:51.456Z,1478845011.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:51.825Z,1478845011.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:51.862Z,1478845011.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:52.234Z,1478845012.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:52.265Z,1478845012.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:52.626Z,1478845012.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:52.673Z,1478845012.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:53.028Z,1478845013.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:53.053Z,1478845013.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:53.425Z,1478845013.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:53.457Z,1478845013.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:53.841Z,1478845013.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:53.857Z,1478845013.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:54.234Z,1478845014.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:54.297Z,1478845014.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:54.627Z,1478845014.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:54.642Z,1478845014.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:55.038Z,1478845015.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:55.089Z,1478845015.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:55.430Z,1478845015.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:55.449Z,1478845015.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:55.830Z,1478845015.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:55.885Z,1478845015.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:56.230Z,1478845016.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:56.277Z,1478845016.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:56.641Z,1478845016.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:56.669Z,1478845016.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:57.041Z,1478845017.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:57.072Z,1478845017.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:57.428Z,1478845017.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:57.454Z,1478845017.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:57.715Z,1478845017.715 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T06:16:57.715Z,1478845017.715 [Rowe_600LCM] Communications Fault, FailCount= 4
2016-11-11T06:16:57.715Z,1478845017.715 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T06:16:57.833Z,1478845017.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:57.849Z,1478845017.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T06:16:57.850Z,1478845017.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:57.893Z,1478845017.893 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T06:16:58.121Z,1478845018.121 [Rowe_600LCM](INFO): Powering down
2016-11-11T06:16:58.242Z,1478845018.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:58.257Z,1478845018.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T06:16:58.259Z,1478845018.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:58.646Z,1478845018.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:58.661Z,1478845018.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:16:58.662Z,1478845018.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:59.025Z,1478845019.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:59.061Z,1478845019.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:16:59.062Z,1478845019.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:59.425Z,1478845019.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:59.456Z,1478845019.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:16:59.458Z,1478845019.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:16:59.478Z,1478845019.478 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T06:16:59.478Z,1478845019.478 [Rowe_600LCM] No Fault, FailCount= 4
2016-11-11T06:16:59.735Z,1478845019.735 [Rowe_600LCM](INFO): Initializing
2016-11-11T06:16:59.736Z,1478845019.736 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T06:16:59.736Z,1478845019.736 [Rowe_600LCM](INFO): LCM OK
2016-11-11T06:16:59.736Z,1478845019.736 [Rowe_600LCM](INFO): Powering up
2016-11-11T06:16:59.827Z,1478845019.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:16:59.854Z,1478845019.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T06:16:59.856Z,1478845019.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:00.226Z,1478845020.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:00.261Z,1478845020.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T06:17:00.262Z,1478845020.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:00.626Z,1478845020.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:00.660Z,1478845020.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T06:17:00.661Z,1478845020.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:01.030Z,1478845021.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:01.060Z,1478845021.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T06:17:01.061Z,1478845021.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:01.426Z,1478845021.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:01.465Z,1478845021.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T06:17:01.465Z,1478845021.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:01.825Z,1478845021.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:01.845Z,1478845021.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T06:17:01.846Z,1478845021.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:02.229Z,1478845022.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:02.249Z,1478845022.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T06:17:02.250Z,1478845022.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:02.640Z,1478845022.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:02.672Z,1478845022.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T06:17:02.673Z,1478845022.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:03.029Z,1478845023.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:03.049Z,1478845023.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T06:17:03.050Z,1478845023.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:03.433Z,1478845023.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:03.449Z,1478845023.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T06:17:03.449Z,1478845023.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:03.834Z,1478845023.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:03.874Z,1478845023.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T06:17:03.876Z,1478845023.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:03.985Z,1478845023.985 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T06:17:04.062Z,1478845024.062 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T06:17:04.068Z,1478845024.068 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T06:17:04.069Z,1478845024.069 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T06:17:04.070Z,1478845024.070 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T06:17:04.236Z,1478845024.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:04.254Z,1478845024.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T06:17:04.255Z,1478845024.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:04.628Z,1478845024.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:04.661Z,1478845024.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:05.026Z,1478845025.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:05.062Z,1478845025.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:05.437Z,1478845025.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:05.457Z,1478845025.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:05.825Z,1478845025.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:05.857Z,1478845025.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:06.226Z,1478845026.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:06.258Z,1478845026.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:06.634Z,1478845026.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:06.685Z,1478845026.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:07.034Z,1478845027.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:07.059Z,1478845027.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:07.425Z,1478845027.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:07.462Z,1478845027.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:07.825Z,1478845027.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:07.861Z,1478845027.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:08.225Z,1478845028.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:08.261Z,1478845028.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:08.625Z,1478845028.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:08.689Z,1478845028.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:09.026Z,1478845029.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:09.053Z,1478845029.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:09.437Z,1478845029.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:09.497Z,1478845029.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:09.834Z,1478845029.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:09.853Z,1478845029.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:10.240Z,1478845030.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:10.288Z,1478845030.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:10.640Z,1478845030.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:10.688Z,1478845030.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:11.034Z,1478845031.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:11.049Z,1478845031.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:11.428Z,1478845031.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:11.456Z,1478845031.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:11.832Z,1478845031.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:11.852Z,1478845031.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:12.218Z,1478845032.218 [NAL9602](INFO): SBD MO Status=2, MOMSN=340, MT Status=2, MTMSN=0
2016-11-11T06:17:12.219Z,1478845032.219 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T06:17:12.254Z,1478845032.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:12.270Z,1478845032.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:12.644Z,1478845032.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:12.659Z,1478845032.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:13.029Z,1478845033.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:13.062Z,1478845033.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:13.425Z,1478845033.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:13.451Z,1478845033.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:13.825Z,1478845033.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:13.851Z,1478845033.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:14.225Z,1478845034.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:14.250Z,1478845034.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:14.625Z,1478845034.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:14.657Z,1478845034.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:15.025Z,1478845035.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:15.057Z,1478845035.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:15.429Z,1478845035.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:15.465Z,1478845035.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:15.825Z,1478845035.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:15.858Z,1478845035.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:16.229Z,1478845036.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:16.255Z,1478845036.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:16.655Z,1478845036.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:16.670Z,1478845036.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:17.048Z,1478845037.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:17.063Z,1478845037.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:17.425Z,1478845037.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:17.457Z,1478845037.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:17.845Z,1478845037.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:17.865Z,1478845037.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:18.234Z,1478845038.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:18.265Z,1478845038.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:18.625Z,1478845038.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:18.642Z,1478845038.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:19.029Z,1478845039.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:19.049Z,1478845039.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:19.432Z,1478845039.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:19.447Z,1478845039.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:19.833Z,1478845039.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:19.853Z,1478845039.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:20.237Z,1478845040.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:20.257Z,1478845040.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:20.633Z,1478845040.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:20.653Z,1478845040.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:21.040Z,1478845041.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:21.093Z,1478845041.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:21.446Z,1478845041.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:21.461Z,1478845041.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:21.825Z,1478845041.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:21.836Z,1478845041.836 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T06:17:21.836Z,1478845041.836 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:17:21.836Z,1478845041.836 [BPC1](ERROR): Data Fault
2016-11-11T06:17:21.861Z,1478845041.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:21.891Z,1478845041.891 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:17:22.233Z,1478845042.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:22.265Z,1478845042.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:22.625Z,1478845042.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:22.661Z,1478845042.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:23.026Z,1478845043.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:23.044Z,1478845043.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:23.063Z,1478845043.063 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:17:23.063Z,1478845043.063 [BPC1] No Fault, FailCount= 1
2016-11-11T06:17:23.429Z,1478845043.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:23.497Z,1478845043.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:23.833Z,1478845043.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:23.881Z,1478845043.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:24.248Z,1478845044.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:24.273Z,1478845044.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:24.644Z,1478845044.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:24.680Z,1478845044.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:25.052Z,1478845045.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:25.089Z,1478845045.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:25.440Z,1478845045.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:25.461Z,1478845045.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:25.837Z,1478845045.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:25.853Z,1478845045.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:26.235Z,1478845046.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:26.251Z,1478845046.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:26.634Z,1478845046.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:26.648Z,1478845046.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:27.028Z,1478845047.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:27.046Z,1478845047.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:27.437Z,1478845047.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:27.452Z,1478845047.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:27.825Z,1478845047.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:27.852Z,1478845047.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:28.225Z,1478845048.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:28.252Z,1478845048.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:28.641Z,1478845048.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:28.656Z,1478845048.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:29.025Z,1478845049.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:29.061Z,1478845049.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:29.440Z,1478845049.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:29.477Z,1478845049.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:29.848Z,1478845049.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:29.877Z,1478845049.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:33.200Z,1478845053.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:33.233Z,1478845053.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:33.375Z,1478845053.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:33.402Z,1478845053.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:33.712Z,1478845053.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:33.753Z,1478845053.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:34.118Z,1478845054.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:34.137Z,1478845054.137 [PNI_TCM](ERROR): CRC does not match. Expected:0x58639 got:0x231
2016-11-11T06:17:34.165Z,1478845054.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:34.506Z,1478845054.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:34.557Z,1478845054.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:34.908Z,1478845054.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:34.957Z,1478845054.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:35.311Z,1478845055.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:35.330Z,1478845055.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:35.710Z,1478845055.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:35.736Z,1478845055.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:36.116Z,1478845056.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:36.173Z,1478845056.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:36.512Z,1478845056.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:36.530Z,1478845056.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:36.908Z,1478845056.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:36.965Z,1478845056.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:37.317Z,1478845057.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:37.365Z,1478845057.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:37.703Z,1478845057.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:37.742Z,1478845057.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:38.112Z,1478845058.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:38.135Z,1478845058.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:38.517Z,1478845058.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:38.534Z,1478845058.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:38.904Z,1478845058.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:38.955Z,1478845058.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:39.303Z,1478845059.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:39.341Z,1478845059.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:39.725Z,1478845059.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:39.742Z,1478845059.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:40.106Z,1478845060.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:40.139Z,1478845060.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:40.509Z,1478845060.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:40.524Z,1478845060.524 [PNI_TCM](ERROR): CRC does not match. Expected:0x34145 got:0x16938
2016-11-11T06:17:40.542Z,1478845060.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:40.925Z,1478845060.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:40.961Z,1478845060.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:41.308Z,1478845061.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:41.340Z,1478845061.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:41.707Z,1478845061.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:41.734Z,1478845061.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:42.116Z,1478845062.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:42.139Z,1478845062.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:42.513Z,1478845062.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:42.540Z,1478845062.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:42.916Z,1478845062.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:42.938Z,1478845062.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:43.313Z,1478845063.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:43.336Z,1478845063.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:43.705Z,1478845063.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:43.741Z,1478845063.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:44.115Z,1478845064.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:44.153Z,1478845064.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:44.524Z,1478845064.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:44.530Z,1478845064.530 [PNI_TCM](ERROR): CRC does not match. Expected:0x9587 got:0x29673
2016-11-11T06:17:44.550Z,1478845064.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:44.916Z,1478845064.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:44.974Z,1478845064.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:45.313Z,1478845065.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:45.339Z,1478845065.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:45.719Z,1478845065.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:45.762Z,1478845065.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:46.131Z,1478845066.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:46.146Z,1478845066.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:46.527Z,1478845066.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:46.558Z,1478845066.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:46.912Z,1478845066.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:46.930Z,1478845066.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:47.311Z,1478845067.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:47.334Z,1478845067.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:47.717Z,1478845067.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:47.732Z,1478845067.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:48.123Z,1478845068.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:48.185Z,1478845068.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:48.517Z,1478845068.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:48.532Z,1478845068.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:48.903Z,1478845068.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:48.969Z,1478845068.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:49.301Z,1478845069.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:49.317Z,1478845069.317 [PNI_TCM](ERROR): CRC does not match. Expected:0x41452 got:0x6591
2016-11-11T06:17:49.338Z,1478845069.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:49.715Z,1478845069.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:49.770Z,1478845069.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:50.123Z,1478845070.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:50.177Z,1478845070.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:50.512Z,1478845070.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:50.549Z,1478845070.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:50.904Z,1478845070.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:50.924Z,1478845070.924 [PNI_TCM](ERROR): CRC does not match. Expected:0x50671 got:0x4423
2016-11-11T06:17:50.951Z,1478845070.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:51.305Z,1478845071.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:51.341Z,1478845071.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:51.725Z,1478845071.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:51.741Z,1478845071.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:52.113Z,1478845072.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:52.149Z,1478845072.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:52.505Z,1478845072.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:52.522Z,1478845072.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:52.910Z,1478845072.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:52.925Z,1478845072.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:53.311Z,1478845073.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:53.326Z,1478845073.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:53.702Z,1478845073.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:53.747Z,1478845073.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:54.118Z,1478845074.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:54.125Z,1478845074.125 [PNI_TCM](ERROR): CRC does not match. Expected:0x12444 got:0x26
2016-11-11T06:17:54.164Z,1478845074.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:54.517Z,1478845074.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:54.537Z,1478845074.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:54.911Z,1478845074.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:54.930Z,1478845074.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:55.313Z,1478845075.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:55.329Z,1478845075.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:55.715Z,1478845075.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:55.729Z,1478845075.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:56.120Z,1478845076.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:56.135Z,1478845076.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:56.512Z,1478845076.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:56.528Z,1478845076.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:56.919Z,1478845076.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:56.938Z,1478845076.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:57.316Z,1478845077.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:57.336Z,1478845077.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:57.721Z,1478845077.721 [NAL9602](INFO): SBD MO Status=2, MOMSN=340, MT Status=2, MTMSN=0
2016-11-11T06:17:57.721Z,1478845077.721 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T06:17:57.740Z,1478845077.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:57.805Z,1478845077.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:58.143Z,1478845078.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:58.159Z,1478845078.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:58.508Z,1478845078.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:58.533Z,1478845078.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:58.914Z,1478845078.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:58.935Z,1478845078.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:59.315Z,1478845079.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:59.338Z,1478845079.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:17:59.712Z,1478845079.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:17:59.740Z,1478845079.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:00.116Z,1478845080.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:00.140Z,1478845080.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:00.519Z,1478845080.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:00.594Z,1478845080.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:00.917Z,1478845080.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:00.973Z,1478845080.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:01.333Z,1478845081.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:01.357Z,1478845081.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:01.705Z,1478845081.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:01.749Z,1478845081.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:02.139Z,1478845082.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:02.159Z,1478845082.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:02.538Z,1478845082.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:02.591Z,1478845082.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:02.923Z,1478845082.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:02.977Z,1478845082.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:03.321Z,1478845083.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:03.349Z,1478845083.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:03.709Z,1478845083.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:03.741Z,1478845083.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:04.140Z,1478845084.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:04.156Z,1478845084.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:04.503Z,1478845084.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:04.518Z,1478845084.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:04.914Z,1478845084.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:04.945Z,1478845084.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:05.312Z,1478845085.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:05.338Z,1478845085.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:05.712Z,1478845085.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:05.738Z,1478845085.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:06.116Z,1478845086.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:06.140Z,1478845086.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:06.512Z,1478845086.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:06.545Z,1478845086.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:06.904Z,1478845086.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:06.944Z,1478845086.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:07.346Z,1478845087.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:07.370Z,1478845087.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:07.714Z,1478845087.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:07.755Z,1478845087.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:08.116Z,1478845088.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:08.157Z,1478845088.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:08.537Z,1478845088.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:08.578Z,1478845088.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:08.913Z,1478845088.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:08.937Z,1478845088.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:09.303Z,1478845089.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:09.346Z,1478845089.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:09.729Z,1478845089.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:09.762Z,1478845089.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:10.113Z,1478845090.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:10.145Z,1478845090.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:10.502Z,1478845090.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:10.538Z,1478845090.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:10.902Z,1478845090.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:10.949Z,1478845090.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:11.326Z,1478845091.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:11.349Z,1478845091.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:11.722Z,1478845091.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:11.770Z,1478845091.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:12.125Z,1478845092.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:12.173Z,1478845092.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:12.526Z,1478845092.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:12.545Z,1478845092.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:12.918Z,1478845092.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:12.953Z,1478845092.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:13.315Z,1478845093.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:13.373Z,1478845093.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:13.760Z,1478845093.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:13.791Z,1478845093.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:14.115Z,1478845094.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:14.230Z,1478845094.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:14.509Z,1478845094.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:14.558Z,1478845094.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:14.933Z,1478845094.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:14.961Z,1478845094.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:15.307Z,1478845095.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:15.357Z,1478845095.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:15.732Z,1478845095.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:15.765Z,1478845095.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:16.109Z,1478845096.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:16.178Z,1478845096.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:16.512Z,1478845096.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:16.565Z,1478845096.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:16.915Z,1478845096.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:16.952Z,1478845096.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:17.301Z,1478845097.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:17.338Z,1478845097.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:17.720Z,1478845097.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:17.775Z,1478845097.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:18.124Z,1478845098.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:18.193Z,1478845098.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:18.577Z,1478845098.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:18.628Z,1478845098.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:18.919Z,1478845098.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:18.974Z,1478845098.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:19.303Z,1478845099.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:19.357Z,1478845099.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:19.704Z,1478845099.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:19.785Z,1478845099.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:20.104Z,1478845100.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:20.152Z,1478845100.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:20.512Z,1478845100.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:20.558Z,1478845100.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:20.911Z,1478845100.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:20.967Z,1478845100.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:21.310Z,1478845101.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:21.332Z,1478845101.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:21.708Z,1478845101.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:21.733Z,1478845101.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:22.112Z,1478845102.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:22.144Z,1478845102.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:22.504Z,1478845102.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:22.544Z,1478845102.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:22.914Z,1478845102.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:22.957Z,1478845102.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:23.313Z,1478845103.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:23.361Z,1478845103.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:23.718Z,1478845103.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:23.764Z,1478845103.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:24.136Z,1478845104.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:24.162Z,1478845104.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:24.513Z,1478845104.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:24.590Z,1478845104.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:24.911Z,1478845104.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:24.944Z,1478845104.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:25.302Z,1478845105.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:25.335Z,1478845105.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:25.712Z,1478845105.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:25.768Z,1478845105.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:26.111Z,1478845106.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:26.137Z,1478845106.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:26.511Z,1478845106.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:26.545Z,1478845106.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:26.904Z,1478845106.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:26.993Z,1478845106.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:27.304Z,1478845107.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:27.393Z,1478845107.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:27.711Z,1478845107.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:27.793Z,1478845107.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:28.125Z,1478845108.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:28.179Z,1478845108.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:28.516Z,1478845108.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:28.540Z,1478845108.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:28.923Z,1478845108.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:28.975Z,1478845108.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:29.320Z,1478845109.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:29.352Z,1478845109.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:29.701Z,1478845109.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:29.745Z,1478845109.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:30.110Z,1478845110.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:30.138Z,1478845110.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:33.723Z,1478845113.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:33.748Z,1478845113.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:33.860Z,1478845113.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:33.893Z,1478845113.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:34.241Z,1478845114.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:34.256Z,1478845114.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:34.635Z,1478845114.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:34.657Z,1478845114.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:35.025Z,1478845115.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:35.057Z,1478845115.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:35.436Z,1478845115.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:35.457Z,1478845115.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:35.825Z,1478845115.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:35.860Z,1478845115.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:36.225Z,1478845116.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:36.265Z,1478845116.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:36.633Z,1478845116.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:36.668Z,1478845116.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:37.033Z,1478845117.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:37.068Z,1478845117.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:37.440Z,1478845117.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:37.462Z,1478845117.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:37.848Z,1478845117.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:37.872Z,1478845117.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:38.234Z,1478845118.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:38.249Z,1478845118.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:38.633Z,1478845118.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:38.653Z,1478845118.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:39.025Z,1478845119.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:39.045Z,1478845119.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:39.429Z,1478845119.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:39.444Z,1478845119.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:39.829Z,1478845119.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:39.853Z,1478845119.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:40.229Z,1478845120.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:40.289Z,1478845120.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:40.629Z,1478845120.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:40.644Z,1478845120.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:41.029Z,1478845121.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:41.077Z,1478845121.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:41.429Z,1478845121.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:41.444Z,1478845121.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:41.825Z,1478845121.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:41.866Z,1478845121.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:42.229Z,1478845122.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:42.277Z,1478845122.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:42.625Z,1478845122.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:42.645Z,1478845122.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:43.029Z,1478845123.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:43.044Z,1478845123.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:43.429Z,1478845123.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:43.449Z,1478845123.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:43.829Z,1478845123.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:43.853Z,1478845123.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:44.229Z,1478845124.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:44.244Z,1478845124.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:44.629Z,1478845124.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:44.649Z,1478845124.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:45.029Z,1478845125.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:45.049Z,1478845125.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:45.425Z,1478845125.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:45.445Z,1478845125.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:45.844Z,1478845125.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:45.868Z,1478845125.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:46.236Z,1478845126.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:46.252Z,1478845126.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:46.629Z,1478845126.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:46.644Z,1478845126.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:47.026Z,1478845127.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:47.053Z,1478845127.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:47.433Z,1478845127.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:47.473Z,1478845127.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:47.830Z,1478845127.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:47.845Z,1478845127.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:48.229Z,1478845128.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:48.249Z,1478845128.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:48.629Z,1478845128.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:48.670Z,1478845128.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:49.029Z,1478845129.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:49.044Z,1478845129.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:49.429Z,1478845129.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:49.449Z,1478845129.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:49.825Z,1478845129.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:49.845Z,1478845129.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:50.238Z,1478845130.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:50.261Z,1478845130.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:50.636Z,1478845130.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:50.651Z,1478845130.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:51.030Z,1478845131.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:51.045Z,1478845131.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:51.426Z,1478845131.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:51.441Z,1478845131.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:51.826Z,1478845131.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:51.842Z,1478845131.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:52.226Z,1478845132.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:52.293Z,1478845132.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:52.630Z,1478845132.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:52.645Z,1478845132.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:53.029Z,1478845133.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:53.046Z,1478845133.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:53.425Z,1478845133.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:53.466Z,1478845133.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:53.829Z,1478845133.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:53.845Z,1478845133.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:54.225Z,1478845134.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:54.273Z,1478845134.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:54.644Z,1478845134.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:54.659Z,1478845134.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:55.040Z,1478845135.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:55.078Z,1478845135.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:55.429Z,1478845135.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:55.477Z,1478845135.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:55.825Z,1478845135.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:55.845Z,1478845135.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:56.229Z,1478845136.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:56.244Z,1478845136.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:56.625Z,1478845136.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:56.645Z,1478845136.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:57.029Z,1478845137.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:57.044Z,1478845137.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:57.430Z,1478845137.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:57.447Z,1478845137.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:57.831Z,1478845137.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:57.854Z,1478845137.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:58.229Z,1478845138.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:58.244Z,1478845138.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:58.625Z,1478845138.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:58.640Z,1478845138.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:59.029Z,1478845139.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:59.049Z,1478845139.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:59.425Z,1478845139.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:59.445Z,1478845139.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:59.833Z,1478845139.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:18:59.855Z,1478845139.855 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T06:18:59.855Z,1478845139.855 [Rowe_600LCM] Communications Fault, FailCount= 5
2016-11-11T06:18:59.855Z,1478845139.855 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T06:18:59.858Z,1478845139.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:18:59.886Z,1478845139.886 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T06:18:59.887Z,1478845139.887 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-11-11T06:19:00.229Z,1478845140.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:00.249Z,1478845140.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T06:19:00.250Z,1478845140.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:00.259Z,1478845140.259 [Rowe_600LCM](INFO): Powering down
2016-11-11T06:19:00.629Z,1478845140.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:00.643Z,1478845140.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T06:19:00.644Z,1478845140.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:01.029Z,1478845141.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:01.044Z,1478845141.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:19:01.045Z,1478845141.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:01.429Z,1478845141.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:01.449Z,1478845141.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:19:01.450Z,1478845141.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:01.825Z,1478845141.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:01.848Z,1478845141.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:19:01.849Z,1478845141.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:02.229Z,1478845142.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:02.244Z,1478845142.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T06:19:02.245Z,1478845142.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:02.629Z,1478845142.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:02.649Z,1478845142.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T06:19:02.650Z,1478845142.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:03.026Z,1478845143.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:03.045Z,1478845143.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T06:19:03.046Z,1478845143.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:03.444Z,1478845143.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:03.483Z,1478845143.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T06:19:03.484Z,1478845143.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:03.837Z,1478845143.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:03.861Z,1478845143.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T06:19:03.862Z,1478845143.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:04.226Z,1478845144.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:04.249Z,1478845144.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T06:19:04.250Z,1478845144.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:04.626Z,1478845144.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:04.649Z,1478845144.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T06:19:04.650Z,1478845144.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:05.026Z,1478845145.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:05.057Z,1478845145.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T06:19:05.058Z,1478845145.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:05.426Z,1478845145.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:05.445Z,1478845145.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T06:19:05.446Z,1478845145.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:05.826Z,1478845145.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:05.853Z,1478845145.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T06:19:05.854Z,1478845145.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:06.238Z,1478845146.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:06.257Z,1478845146.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T06:19:06.258Z,1478845146.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:06.625Z,1478845146.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:06.679Z,1478845146.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T06:19:06.680Z,1478845146.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:07.026Z,1478845147.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:07.052Z,1478845147.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T06:19:07.054Z,1478845147.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:07.440Z,1478845147.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:07.470Z,1478845147.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T06:19:07.471Z,1478845147.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:07.836Z,1478845147.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:07.894Z,1478845147.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T06:19:07.895Z,1478845147.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:08.226Z,1478845148.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:08.253Z,1478845148.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T06:19:08.254Z,1478845148.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:08.626Z,1478845148.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:08.645Z,1478845148.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T06:19:08.646Z,1478845148.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:09.025Z,1478845149.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:09.076Z,1478845149.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T06:19:09.077Z,1478845149.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:09.425Z,1478845149.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:09.461Z,1478845149.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T06:19:09.462Z,1478845149.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:09.825Z,1478845149.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:09.878Z,1478845149.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T06:19:09.879Z,1478845149.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:10.229Z,1478845150.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:10.301Z,1478845150.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T06:19:10.301Z,1478845150.302 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:10.302Z,1478845150.302 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2016-11-11T06:19:10.302Z,1478845150.302 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:19:10.308Z,1478845150.308 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:10.308Z,1478845150.308 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2016-11-11T06:19:10.308Z,1478845150.308 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:19:10.323Z,1478845150.323 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:19:10.323Z,1478845150.323 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:19:10.625Z,1478845150.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:10.682Z,1478845150.682 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:19:10.683Z,1478845150.682 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2016-11-11T06:19:10.683Z,1478845150.683 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:19:10.683Z,1478845150.683 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2016-11-11T06:19:11.025Z,1478845151.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:11.060Z,1478845151.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:19:11.060Z,1478845151.060 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:19:11.061Z,1478845151.061 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:19:11.065Z,1478845151.065 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:19:11.066Z,1478845151.066 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:19:11.066Z,1478845151.066 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:19:11.425Z,1478845151.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:11.460Z,1478845151.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T06:19:11.461Z,1478845151.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:11.849Z,1478845151.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:11.870Z,1478845151.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T06:19:11.872Z,1478845151.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:12.236Z,1478845152.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:12.262Z,1478845152.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T06:19:12.264Z,1478845152.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:12.625Z,1478845152.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:12.652Z,1478845152.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T06:19:12.654Z,1478845152.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:13.034Z,1478845153.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:13.048Z,1478845153.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T06:19:13.049Z,1478845153.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:13.428Z,1478845153.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:13.460Z,1478845153.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T06:19:13.461Z,1478845153.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:13.833Z,1478845153.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:13.852Z,1478845153.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T06:19:13.853Z,1478845153.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:14.226Z,1478845154.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:14.260Z,1478845154.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T06:19:14.261Z,1478845154.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:14.625Z,1478845154.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:14.657Z,1478845154.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T06:19:14.658Z,1478845154.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:14.665Z,1478845154.665 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:14.665Z,1478845154.665 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 11
2016-11-11T06:19:14.665Z,1478845154.665 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:19:14.693Z,1478845154.694 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:19:15.047Z,1478845155.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:15.070Z,1478845155.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T06:19:15.072Z,1478845155.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:15.126Z,1478845155.126 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:19:15.126Z,1478845155.126 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 11
2016-11-11T06:19:15.444Z,1478845155.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:15.474Z,1478845155.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T06:19:15.475Z,1478845155.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:15.481Z,1478845155.481 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:19:15.482Z,1478845155.482 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:19:15.482Z,1478845155.482 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:19:15.826Z,1478845155.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:15.849Z,1478845155.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T06:19:15.850Z,1478845155.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:16.229Z,1478845156.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:16.243Z,1478845156.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T06:19:16.245Z,1478845156.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:16.629Z,1478845156.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:16.649Z,1478845156.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T06:19:16.650Z,1478845156.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:17.029Z,1478845157.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:17.052Z,1478845157.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T06:19:17.053Z,1478845157.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:17.435Z,1478845157.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:17.450Z,1478845157.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T06:19:17.451Z,1478845157.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:17.859Z,1478845157.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:17.876Z,1478845157.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T06:19:17.877Z,1478845157.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:18.228Z,1478845158.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:18.253Z,1478845158.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T06:19:18.254Z,1478845158.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:18.633Z,1478845158.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:18.647Z,1478845158.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T06:19:18.648Z,1478845158.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:19.034Z,1478845159.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:19.061Z,1478845159.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T06:19:19.062Z,1478845159.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:19.426Z,1478845159.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:19.457Z,1478845159.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T06:19:19.458Z,1478845159.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:19.825Z,1478845159.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:19.860Z,1478845159.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:20.234Z,1478845160.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:20.286Z,1478845160.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:20.625Z,1478845160.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:20.678Z,1478845160.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:21.040Z,1478845161.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:21.073Z,1478845161.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:21.440Z,1478845161.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:21.465Z,1478845161.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:21.825Z,1478845161.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:21.845Z,1478845161.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:22.230Z,1478845162.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:22.289Z,1478845162.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:22.633Z,1478845162.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:22.653Z,1478845162.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:23.036Z,1478845163.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:23.095Z,1478845163.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:23.432Z,1478845163.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:23.447Z,1478845163.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:23.838Z,1478845163.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:23.889Z,1478845163.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:24.228Z,1478845164.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:24.293Z,1478845164.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:24.636Z,1478845164.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:24.657Z,1478845164.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:25.036Z,1478845165.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:25.057Z,1478845165.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:25.440Z,1478845165.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:25.463Z,1478845165.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:25.836Z,1478845165.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:25.864Z,1478845165.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:26.230Z,1478845166.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:26.245Z,1478845166.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:26.629Z,1478845166.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:26.645Z,1478845166.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:27.030Z,1478845167.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:27.049Z,1478845167.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:27.434Z,1478845167.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:27.449Z,1478845167.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:27.833Z,1478845167.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:27.853Z,1478845167.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:28.232Z,1478845168.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:28.249Z,1478845168.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:28.634Z,1478845168.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:28.658Z,1478845168.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:28.679Z,1478845168.679 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T06:14:28.6Z
2016-11-11T06:19:28.679Z,1478845168.679 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T06:19:28.679Z,1478845168.680 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T06:19:29.028Z,1478845169.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:29.054Z,1478845169.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:29.870Z,1478845169.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:29.901Z,1478845169.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:30.016Z,1478845170.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:30.049Z,1478845170.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:33.243Z,1478845173.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:33.259Z,1478845173.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:33.324Z,1478845173.324 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0036.lzma
2016-11-11T06:19:33.385Z,1478845173.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:33.425Z,1478845173.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:33.724Z,1478845173.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:33.755Z,1478845173.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:34.089Z,1478845174.089 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0036.lzma.bak
2016-11-11T06:19:34.089Z,1478845174.089 [DataOverHttps](INFO): SBD MOMSN=4555089
2016-11-11T06:19:34.140Z,1478845174.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:34.165Z,1478845174.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:35.677Z,1478845175.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:35.737Z,1478845175.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:35.829Z,1478845175.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:35.858Z,1478845175.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:39.270Z,1478845179.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:39.334Z,1478845179.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:39.448Z,1478845179.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:39.489Z,1478845179.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:39.828Z,1478845179.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:39.848Z,1478845179.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:40.224Z,1478845180.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:40.271Z,1478845180.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:40.609Z,1478845180.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:40.641Z,1478845180.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:41.018Z,1478845181.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:41.090Z,1478845181.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:44.350Z,1478845184.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:44.405Z,1478845184.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:44.459Z,1478845184.459 [DataOverHttps](INFO): Sending 294 bytes from file Logs/20161111T044527/Express0037.lzma
2016-11-11T06:19:44.528Z,1478845184.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:44.569Z,1478845184.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:44.868Z,1478845184.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:44.899Z,1478845184.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:45.237Z,1478845185.237 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0037.lzma.bak
2016-11-11T06:19:45.237Z,1478845185.237 [DataOverHttps](INFO): SBD MOMSN=4555091
2016-11-11T06:19:45.282Z,1478845185.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:45.314Z,1478845185.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:46.512Z,1478845186.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:46.548Z,1478845186.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:46.561Z,1478845186.561 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T06:19:46.561Z,1478845186.561 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T06:19:46.561Z,1478845186.561 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T06:19:46.625Z,1478845186.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:46.657Z,1478845186.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:49.932Z,1478845189.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:49.966Z,1478845189.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:50.060Z,1478845190.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:50.113Z,1478845190.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:50.425Z,1478845190.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:50.441Z,1478845190.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:50.824Z,1478845190.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:50.840Z,1478845190.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:51.228Z,1478845191.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:51.244Z,1478845191.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:51.624Z,1478845191.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:51.639Z,1478845191.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:52.024Z,1478845192.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:52.045Z,1478845192.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:52.428Z,1478845192.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:52.444Z,1478845192.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:52.817Z,1478845192.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:52.853Z,1478845192.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:53.217Z,1478845193.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:53.254Z,1478845193.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:53.617Z,1478845193.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:53.653Z,1478845193.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:54.017Z,1478845194.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:54.032Z,1478845194.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:54.417Z,1478845194.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:54.433Z,1478845194.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:54.817Z,1478845194.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:54.837Z,1478845194.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:55.223Z,1478845195.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:55.238Z,1478845195.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:55.625Z,1478845195.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:55.640Z,1478845195.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:56.024Z,1478845196.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:56.039Z,1478845196.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:56.424Z,1478845196.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:56.458Z,1478845196.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:56.825Z,1478845196.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:56.840Z,1478845196.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:57.220Z,1478845197.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:57.252Z,1478845197.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:57.617Z,1478845197.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:57.662Z,1478845197.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:58.048Z,1478845198.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:58.069Z,1478845198.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:58.428Z,1478845198.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:58.498Z,1478845198.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:58.817Z,1478845198.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:58.873Z,1478845198.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:59.217Z,1478845199.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:59.232Z,1478845199.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:19:59.617Z,1478845199.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:19:59.637Z,1478845199.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:00.021Z,1478845200.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:00.041Z,1478845200.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:00.421Z,1478845200.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:00.441Z,1478845200.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:00.825Z,1478845200.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:00.841Z,1478845200.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:01.225Z,1478845201.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:01.240Z,1478845201.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:01.624Z,1478845201.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:01.639Z,1478845201.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:02.020Z,1478845202.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:02.053Z,1478845202.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:02.433Z,1478845202.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:02.453Z,1478845202.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:02.838Z,1478845202.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:02.853Z,1478845202.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:03.217Z,1478845203.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:03.249Z,1478845203.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:03.617Z,1478845203.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:03.651Z,1478845203.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:04.001Z,1478845204.001 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T06:20:04.017Z,1478845204.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:04.059Z,1478845204.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:04.417Z,1478845204.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:04.449Z,1478845204.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:04.817Z,1478845204.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:04.851Z,1478845204.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:05.217Z,1478845205.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:05.242Z,1478845205.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:05.617Z,1478845205.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:05.650Z,1478845205.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:06.021Z,1478845206.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:06.046Z,1478845206.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:06.417Z,1478845206.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:06.453Z,1478845206.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:06.817Z,1478845206.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:06.845Z,1478845206.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:07.217Z,1478845207.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:07.253Z,1478845207.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:07.617Z,1478845207.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:07.653Z,1478845207.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:08.017Z,1478845208.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:08.053Z,1478845208.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:08.417Z,1478845208.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:08.453Z,1478845208.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:08.821Z,1478845208.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:08.853Z,1478845208.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:09.216Z,1478845209.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:09.257Z,1478845209.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:09.600Z,1478845209.601 [NAL9602](INFO): Powering down
2016-11-11T06:20:09.620Z,1478845209.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:09.651Z,1478845209.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:10.017Z,1478845210.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:10.060Z,1478845210.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:10.421Z,1478845210.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:10.485Z,1478845210.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:10.817Z,1478845210.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:10.885Z,1478845210.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:11.225Z,1478845211.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:11.240Z,1478845211.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:11.623Z,1478845211.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:11.676Z,1478845211.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:12.023Z,1478845212.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:12.045Z,1478845212.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:12.431Z,1478845212.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:12.474Z,1478845212.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:12.824Z,1478845212.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:12.875Z,1478845212.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:13.223Z,1478845213.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:13.245Z,1478845213.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:13.620Z,1478845213.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:13.642Z,1478845213.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:14.024Z,1478845214.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:14.039Z,1478845214.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:14.424Z,1478845214.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:14.445Z,1478845214.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:14.829Z,1478845214.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:14.844Z,1478845214.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:15.217Z,1478845215.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:15.249Z,1478845215.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:15.617Z,1478845215.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:15.650Z,1478845215.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:16.024Z,1478845216.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:16.046Z,1478845216.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:16.417Z,1478845216.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:16.449Z,1478845216.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:16.817Z,1478845216.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:16.850Z,1478845216.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:17.224Z,1478845217.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:17.247Z,1478845217.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:17.617Z,1478845217.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:17.641Z,1478845217.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:18.017Z,1478845218.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:18.045Z,1478845218.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:18.429Z,1478845218.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:18.449Z,1478845218.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:18.817Z,1478845218.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:18.836Z,1478845218.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:19.217Z,1478845219.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:19.245Z,1478845219.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:19.617Z,1478845219.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:19.641Z,1478845219.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:20.017Z,1478845220.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:20.041Z,1478845220.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:20.417Z,1478845220.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:20.437Z,1478845220.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:20.821Z,1478845220.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:20.841Z,1478845220.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:21.221Z,1478845221.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:21.236Z,1478845221.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:21.628Z,1478845221.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:21.644Z,1478845221.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:22.019Z,1478845222.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:22.051Z,1478845222.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:22.424Z,1478845222.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:22.439Z,1478845222.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:22.829Z,1478845222.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:22.844Z,1478845222.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:23.233Z,1478845223.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:23.248Z,1478845223.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:23.617Z,1478845223.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:23.649Z,1478845223.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:24.024Z,1478845224.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:24.048Z,1478845224.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:24.428Z,1478845224.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:24.447Z,1478845224.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:24.817Z,1478845224.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:24.849Z,1478845224.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:25.217Z,1478845225.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:25.281Z,1478845225.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:25.621Z,1478845225.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:25.665Z,1478845225.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:26.025Z,1478845226.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:26.041Z,1478845226.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:26.425Z,1478845226.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:26.473Z,1478845226.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:26.825Z,1478845226.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:26.845Z,1478845226.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:27.229Z,1478845227.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:27.293Z,1478845227.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:27.625Z,1478845227.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:27.677Z,1478845227.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:28.025Z,1478845228.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:28.040Z,1478845228.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:28.424Z,1478845228.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:28.445Z,1478845228.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:28.825Z,1478845228.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:28.845Z,1478845228.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:29.233Z,1478845229.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:29.253Z,1478845229.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:29.628Z,1478845229.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:29.644Z,1478845229.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:30.017Z,1478845230.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:30.047Z,1478845230.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:30.417Z,1478845230.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:30.452Z,1478845230.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:30.817Z,1478845230.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:30.848Z,1478845230.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:31.217Z,1478845231.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:31.258Z,1478845231.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:31.614Z,1478845231.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:31.730Z,1478845231.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:32.017Z,1478845232.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:32.057Z,1478845232.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:32.417Z,1478845232.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:32.432Z,1478845232.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:32.822Z,1478845232.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:32.837Z,1478845232.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:33.223Z,1478845233.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:33.238Z,1478845233.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:33.624Z,1478845233.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:33.639Z,1478845233.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:34.023Z,1478845234.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:34.038Z,1478845234.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:34.424Z,1478845234.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:34.439Z,1478845234.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:34.823Z,1478845234.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:34.850Z,1478845234.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:35.224Z,1478845235.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:35.250Z,1478845235.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:35.628Z,1478845235.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:35.644Z,1478845235.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:36.017Z,1478845236.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:36.064Z,1478845236.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:36.417Z,1478845236.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:36.442Z,1478845236.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:36.832Z,1478845236.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:36.848Z,1478845236.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:37.217Z,1478845237.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:37.253Z,1478845237.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:37.617Z,1478845237.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:37.637Z,1478845237.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:38.022Z,1478845238.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:38.038Z,1478845238.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:38.420Z,1478845238.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:38.435Z,1478845238.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:38.821Z,1478845238.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:38.841Z,1478845238.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:39.223Z,1478845239.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:39.238Z,1478845239.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:39.624Z,1478845239.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:39.701Z,1478845239.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:40.025Z,1478845240.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:40.058Z,1478845240.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:40.417Z,1478845240.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:40.510Z,1478845240.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:40.814Z,1478845240.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:40.857Z,1478845240.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:41.217Z,1478845241.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:41.245Z,1478845241.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:41.617Z,1478845241.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:41.670Z,1478845241.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:42.017Z,1478845242.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:42.066Z,1478845242.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:42.417Z,1478845242.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:42.452Z,1478845242.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:42.817Z,1478845242.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:42.849Z,1478845242.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:43.217Z,1478845243.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:43.253Z,1478845243.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:43.617Z,1478845243.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:43.652Z,1478845243.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:44.019Z,1478845244.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:44.055Z,1478845244.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:44.417Z,1478845244.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:44.437Z,1478845244.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:44.817Z,1478845244.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:44.832Z,1478845244.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:45.217Z,1478845245.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:45.237Z,1478845245.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:45.622Z,1478845245.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:45.637Z,1478845245.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:46.022Z,1478845246.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:46.037Z,1478845246.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:46.429Z,1478845246.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:46.444Z,1478845246.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:46.824Z,1478845246.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:46.845Z,1478845246.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:47.224Z,1478845247.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:47.239Z,1478845247.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:50.631Z,1478845250.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:50.648Z,1478845250.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:50.744Z,1478845250.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:50.773Z,1478845250.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:51.125Z,1478845251.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:51.150Z,1478845251.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:51.521Z,1478845251.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:51.555Z,1478845251.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:51.921Z,1478845251.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:51.946Z,1478845251.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:52.332Z,1478845252.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:52.355Z,1478845252.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:52.725Z,1478845252.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:52.757Z,1478845252.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:53.121Z,1478845253.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:53.146Z,1478845253.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:53.521Z,1478845253.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:53.553Z,1478845253.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:53.921Z,1478845253.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:53.977Z,1478845253.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:54.321Z,1478845254.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:54.373Z,1478845254.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:54.731Z,1478845254.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:54.758Z,1478845254.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:55.128Z,1478845255.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:55.144Z,1478845255.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:55.530Z,1478845255.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:55.583Z,1478845255.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:55.924Z,1478845255.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:55.956Z,1478845255.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:56.321Z,1478845256.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:56.370Z,1478845256.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:56.722Z,1478845256.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:56.777Z,1478845256.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:57.122Z,1478845257.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:57.157Z,1478845257.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:57.540Z,1478845257.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:57.565Z,1478845257.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:57.925Z,1478845257.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:57.961Z,1478845257.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:58.321Z,1478845258.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:58.349Z,1478845258.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:58.721Z,1478845258.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:58.757Z,1478845258.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:59.121Z,1478845259.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:59.160Z,1478845259.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:59.521Z,1478845259.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:59.561Z,1478845259.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:20:59.925Z,1478845259.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:20:59.945Z,1478845259.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:00.325Z,1478845260.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:00.340Z,1478845260.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:00.721Z,1478845260.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:00.741Z,1478845260.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:01.134Z,1478845261.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:01.180Z,1478845261.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:01.525Z,1478845261.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:01.540Z,1478845261.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:01.927Z,1478845261.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:01.974Z,1478845261.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:02.328Z,1478845262.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:02.343Z,1478845262.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:02.726Z,1478845262.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:02.753Z,1478845262.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:03.128Z,1478845263.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:03.143Z,1478845263.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:03.528Z,1478845263.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:03.543Z,1478845263.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:03.924Z,1478845263.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:03.948Z,1478845263.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:04.329Z,1478845264.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:04.345Z,1478845264.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:04.732Z,1478845264.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:04.748Z,1478845264.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:05.121Z,1478845265.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:05.156Z,1478845265.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:05.521Z,1478845265.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:05.557Z,1478845265.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:05.925Z,1478845265.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:05.952Z,1478845265.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:06.327Z,1478845266.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:06.343Z,1478845266.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:06.725Z,1478845266.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:06.745Z,1478845266.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:07.125Z,1478845267.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:07.145Z,1478845267.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:07.529Z,1478845267.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:07.544Z,1478845267.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:07.927Z,1478845267.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:07.952Z,1478845267.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:08.324Z,1478845268.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:08.353Z,1478845268.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:08.728Z,1478845268.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:08.797Z,1478845268.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:09.128Z,1478845269.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:09.149Z,1478845269.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:09.528Z,1478845269.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:09.569Z,1478845269.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:09.921Z,1478845269.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:09.953Z,1478845269.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:10.321Z,1478845270.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:10.370Z,1478845270.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:10.721Z,1478845270.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:10.770Z,1478845270.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:11.121Z,1478845271.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:11.153Z,1478845271.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:11.521Z,1478845271.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:11.561Z,1478845271.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:11.925Z,1478845271.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:11.939Z,1478845271.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:12.327Z,1478845272.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:12.342Z,1478845272.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:12.725Z,1478845272.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:12.745Z,1478845272.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:13.129Z,1478845273.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:13.144Z,1478845273.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:13.525Z,1478845273.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:13.540Z,1478845273.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:13.927Z,1478845273.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:13.957Z,1478845273.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:14.321Z,1478845274.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:14.346Z,1478845274.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:14.721Z,1478845274.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:14.752Z,1478845274.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:15.121Z,1478845275.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:15.156Z,1478845275.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:15.521Z,1478845275.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:15.556Z,1478845275.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:15.921Z,1478845275.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:15.944Z,1478845275.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:16.321Z,1478845276.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:16.356Z,1478845276.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:16.721Z,1478845276.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:16.756Z,1478845276.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:17.121Z,1478845277.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:17.152Z,1478845277.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:17.532Z,1478845277.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:17.569Z,1478845277.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:17.925Z,1478845277.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:17.961Z,1478845277.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:18.321Z,1478845278.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:18.361Z,1478845278.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:18.725Z,1478845278.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:18.740Z,1478845278.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:19.125Z,1478845279.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:19.172Z,1478845279.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:19.536Z,1478845279.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:19.557Z,1478845279.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:19.921Z,1478845279.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:19.956Z,1478845279.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:20.332Z,1478845280.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:20.353Z,1478845280.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:20.721Z,1478845280.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:20.753Z,1478845280.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:21.132Z,1478845281.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:21.147Z,1478845281.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:21.525Z,1478845281.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:21.542Z,1478845281.542 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T06:21:21.542Z,1478845281.542 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:21:21.542Z,1478845281.542 [BPC1](ERROR): Data Fault
2016-11-11T06:21:21.566Z,1478845281.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:21.613Z,1478845281.613 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:21:21.921Z,1478845281.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:21.957Z,1478845281.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:22.325Z,1478845282.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:22.362Z,1478845282.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:22.725Z,1478845282.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:22.757Z,1478845282.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:22.778Z,1478845282.778 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:21:22.778Z,1478845282.778 [BPC1] No Fault, FailCount= 1
2016-11-11T06:21:23.121Z,1478845283.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:23.205Z,1478845283.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:23.521Z,1478845283.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:23.569Z,1478845283.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:23.921Z,1478845283.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:23.957Z,1478845283.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:24.321Z,1478845284.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:24.352Z,1478845284.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:24.725Z,1478845284.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:24.764Z,1478845284.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:25.121Z,1478845285.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:25.161Z,1478845285.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:25.521Z,1478845285.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:25.536Z,1478845285.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:25.921Z,1478845285.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:25.949Z,1478845285.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:26.329Z,1478845286.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:26.349Z,1478845286.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:26.728Z,1478845286.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:26.744Z,1478845286.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:27.128Z,1478845287.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:27.142Z,1478845287.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:27.533Z,1478845287.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:27.548Z,1478845287.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:27.929Z,1478845287.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:27.944Z,1478845287.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:28.329Z,1478845288.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:28.349Z,1478845288.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:28.724Z,1478845288.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:28.755Z,1478845288.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:29.121Z,1478845289.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:29.146Z,1478845289.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:29.521Z,1478845289.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:29.554Z,1478845289.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:29.921Z,1478845289.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:29.953Z,1478845289.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:30.321Z,1478845290.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:30.361Z,1478845290.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:30.721Z,1478845290.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:30.754Z,1478845290.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:31.121Z,1478845291.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:31.153Z,1478845291.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:31.529Z,1478845291.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:31.554Z,1478845291.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:31.921Z,1478845291.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:31.947Z,1478845291.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:32.321Z,1478845292.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:32.357Z,1478845292.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:32.721Z,1478845292.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:32.758Z,1478845292.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:33.121Z,1478845293.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:33.161Z,1478845293.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:33.524Z,1478845293.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:33.561Z,1478845293.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:33.937Z,1478845293.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:33.973Z,1478845293.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:34.330Z,1478845294.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:34.345Z,1478845294.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:34.730Z,1478845294.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:34.746Z,1478845294.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:35.130Z,1478845295.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:35.181Z,1478845295.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:35.544Z,1478845295.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:35.597Z,1478845295.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:35.929Z,1478845295.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:35.989Z,1478845295.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:36.321Z,1478845296.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:36.353Z,1478845296.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:36.721Z,1478845296.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:36.760Z,1478845296.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:37.121Z,1478845297.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:37.173Z,1478845297.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:37.521Z,1478845297.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:37.561Z,1478845297.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:37.921Z,1478845297.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:37.974Z,1478845297.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:38.321Z,1478845298.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:38.375Z,1478845298.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:38.721Z,1478845298.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:38.736Z,1478845298.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:39.127Z,1478845299.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:39.142Z,1478845299.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:39.525Z,1478845299.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:39.545Z,1478845299.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:39.928Z,1478845299.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:39.943Z,1478845299.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:40.328Z,1478845300.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:40.343Z,1478845300.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:40.728Z,1478845300.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:40.742Z,1478845300.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:41.129Z,1478845301.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:41.144Z,1478845301.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:41.529Z,1478845301.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:41.549Z,1478845301.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:41.924Z,1478845301.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:41.955Z,1478845301.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:42.328Z,1478845302.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:42.343Z,1478845302.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:42.721Z,1478845302.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:42.755Z,1478845302.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:43.121Z,1478845303.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:43.155Z,1478845303.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:43.521Z,1478845303.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:43.553Z,1478845303.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:43.921Z,1478845303.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:43.966Z,1478845303.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:44.321Z,1478845304.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:44.362Z,1478845304.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:44.721Z,1478845304.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:44.753Z,1478845304.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:45.121Z,1478845305.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:45.157Z,1478845305.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:45.525Z,1478845305.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:45.540Z,1478845305.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:45.925Z,1478845305.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:45.940Z,1478845305.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:46.329Z,1478845306.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:46.344Z,1478845306.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:46.727Z,1478845306.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:46.757Z,1478845306.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:47.133Z,1478845307.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:47.148Z,1478845307.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:47.533Z,1478845307.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:47.549Z,1478845307.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:50.857Z,1478845310.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:50.957Z,1478845310.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:51.045Z,1478845311.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:51.065Z,1478845311.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:51.413Z,1478845311.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:51.446Z,1478845311.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:51.813Z,1478845311.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:51.919Z,1478845311.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:52.213Z,1478845312.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:52.238Z,1478845312.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:52.613Z,1478845312.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:52.665Z,1478845312.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:53.013Z,1478845313.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:53.061Z,1478845313.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:53.413Z,1478845313.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:53.428Z,1478845313.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:53.824Z,1478845313.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:53.847Z,1478845313.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:54.220Z,1478845314.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:54.235Z,1478845314.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:54.619Z,1478845314.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:54.634Z,1478845314.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:55.020Z,1478845315.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:55.035Z,1478845315.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:55.424Z,1478845315.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:55.440Z,1478845315.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:55.820Z,1478845315.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:55.835Z,1478845315.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:56.213Z,1478845316.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:56.247Z,1478845316.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:56.620Z,1478845316.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:56.643Z,1478845316.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:57.013Z,1478845317.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:57.038Z,1478845317.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:57.413Z,1478845317.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:57.446Z,1478845317.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:57.817Z,1478845317.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:57.849Z,1478845317.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:58.213Z,1478845318.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:58.249Z,1478845318.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:58.613Z,1478845318.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:58.644Z,1478845318.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:59.013Z,1478845319.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:59.045Z,1478845319.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:59.413Z,1478845319.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:59.440Z,1478845319.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:21:59.813Z,1478845319.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:21:59.856Z,1478845319.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:00.213Z,1478845320.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:00.249Z,1478845320.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:00.613Z,1478845320.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:00.628Z,1478845320.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:01.013Z,1478845321.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:01.033Z,1478845321.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:01.421Z,1478845321.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:01.441Z,1478845321.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:01.821Z,1478845321.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:01.837Z,1478845321.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:02.222Z,1478845322.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:02.237Z,1478845322.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:02.621Z,1478845322.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:02.636Z,1478845322.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:03.020Z,1478845323.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:03.040Z,1478845323.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:03.413Z,1478845323.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:03.441Z,1478845323.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:03.815Z,1478845323.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:03.846Z,1478845323.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:04.213Z,1478845324.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:04.240Z,1478845324.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:04.613Z,1478845324.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:04.659Z,1478845324.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:05.013Z,1478845325.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:05.049Z,1478845325.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:05.413Z,1478845325.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:05.485Z,1478845325.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:05.813Z,1478845325.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:05.833Z,1478845325.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:06.219Z,1478845326.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:06.282Z,1478845326.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:06.613Z,1478845326.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:06.649Z,1478845326.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:07.013Z,1478845327.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:07.065Z,1478845327.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:07.413Z,1478845327.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:07.465Z,1478845327.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:07.813Z,1478845327.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:07.836Z,1478845327.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:08.218Z,1478845328.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:08.233Z,1478845328.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:08.619Z,1478845328.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:08.641Z,1478845328.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:09.020Z,1478845329.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:09.036Z,1478845329.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:09.413Z,1478845329.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:09.446Z,1478845329.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:09.812Z,1478845329.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:09.845Z,1478845329.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:10.213Z,1478845330.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:10.245Z,1478845330.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:10.613Z,1478845330.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:10.646Z,1478845330.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:11.013Z,1478845331.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:11.045Z,1478845331.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:11.413Z,1478845331.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:11.445Z,1478845331.445 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:11.445Z,1478845331.445 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2016-11-11T06:22:11.445Z,1478845331.445 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:22:11.452Z,1478845331.452 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:11.452Z,1478845331.452 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2016-11-11T06:22:11.452Z,1478845331.452 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:22:11.478Z,1478845331.478 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:22:11.478Z,1478845331.478 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:22:11.813Z,1478845331.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:11.865Z,1478845331.865 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:22:11.865Z,1478845331.865 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2016-11-11T06:22:11.866Z,1478845331.866 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:22:11.866Z,1478845331.866 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2016-11-11T06:22:12.213Z,1478845332.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:12.247Z,1478845332.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:22:12.248Z,1478845332.248 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:22:12.248Z,1478845332.248 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:22:12.253Z,1478845332.253 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:22:12.253Z,1478845332.253 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:22:12.254Z,1478845332.253 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:22:12.613Z,1478845332.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:12.653Z,1478845332.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:22:12.654Z,1478845332.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:13.013Z,1478845333.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:13.032Z,1478845333.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:22:13.034Z,1478845333.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:13.413Z,1478845333.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:13.432Z,1478845333.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:22:13.433Z,1478845333.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:13.817Z,1478845333.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:13.832Z,1478845333.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T06:22:13.833Z,1478845333.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:14.216Z,1478845334.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:14.236Z,1478845334.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T06:22:14.237Z,1478845334.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:14.616Z,1478845334.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:14.636Z,1478845334.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T06:22:14.637Z,1478845334.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:15.020Z,1478845335.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:15.035Z,1478845335.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T06:22:15.036Z,1478845335.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:15.416Z,1478845335.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:15.444Z,1478845335.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T06:22:15.445Z,1478845335.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:15.820Z,1478845335.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:15.834Z,1478845335.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T06:22:15.835Z,1478845335.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:15.842Z,1478845335.842 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:15.842Z,1478845335.842 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 12
2016-11-11T06:22:15.842Z,1478845335.842 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:22:15.885Z,1478845335.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:22:16.220Z,1478845336.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:16.234Z,1478845336.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T06:22:16.236Z,1478845336.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:16.255Z,1478845336.255 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:22:16.255Z,1478845336.255 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 12
2016-11-11T06:22:16.620Z,1478845336.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:16.642Z,1478845336.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T06:22:16.643Z,1478845336.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:16.649Z,1478845336.649 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:22:16.649Z,1478845336.649 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:22:16.650Z,1478845336.650 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:22:17.017Z,1478845337.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:17.048Z,1478845337.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T06:22:17.049Z,1478845337.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:17.413Z,1478845337.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:17.445Z,1478845337.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T06:22:17.446Z,1478845337.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:17.813Z,1478845337.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:17.849Z,1478845337.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T06:22:17.850Z,1478845337.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:18.213Z,1478845338.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:18.248Z,1478845338.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T06:22:18.249Z,1478845338.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:18.613Z,1478845338.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:18.649Z,1478845338.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T06:22:18.650Z,1478845338.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:19.013Z,1478845339.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:19.048Z,1478845339.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T06:22:19.049Z,1478845339.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:19.413Z,1478845339.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:19.512Z,1478845339.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2016-11-11T06:22:19.514Z,1478845339.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:19.820Z,1478845339.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:19.835Z,1478845339.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T06:22:19.836Z,1478845339.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:20.216Z,1478845340.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:20.238Z,1478845340.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T06:22:20.240Z,1478845340.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:20.620Z,1478845340.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:20.657Z,1478845340.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T06:22:20.658Z,1478845340.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:21.013Z,1478845341.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:21.038Z,1478845341.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T06:22:21.039Z,1478845341.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:21.413Z,1478845341.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:21.461Z,1478845341.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T06:22:21.462Z,1478845341.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:21.813Z,1478845341.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:21.864Z,1478845341.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T06:22:21.865Z,1478845341.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:22.213Z,1478845342.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:22.244Z,1478845342.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T06:22:22.245Z,1478845342.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:22.613Z,1478845342.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:22.644Z,1478845342.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T06:22:22.645Z,1478845342.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:23.013Z,1478845343.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:23.048Z,1478845343.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T06:22:23.049Z,1478845343.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:23.421Z,1478845343.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:23.453Z,1478845343.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T06:22:23.454Z,1478845343.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:23.821Z,1478845343.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:23.835Z,1478845343.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T06:22:23.836Z,1478845343.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:24.220Z,1478845344.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:24.234Z,1478845344.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T06:22:24.235Z,1478845344.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:24.623Z,1478845344.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:24.638Z,1478845344.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T06:22:24.639Z,1478845344.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:25.021Z,1478845345.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:25.040Z,1478845345.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T06:22:25.041Z,1478845345.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:25.413Z,1478845345.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:25.446Z,1478845345.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T06:22:25.447Z,1478845345.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:25.813Z,1478845345.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:25.854Z,1478845345.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T06:22:25.855Z,1478845345.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:26.213Z,1478845346.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:26.248Z,1478845346.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T06:22:26.249Z,1478845346.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:26.613Z,1478845346.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:26.639Z,1478845346.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T06:22:26.640Z,1478845346.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:27.017Z,1478845347.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:27.053Z,1478845347.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T06:22:27.054Z,1478845347.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:27.416Z,1478845347.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:27.436Z,1478845347.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T06:22:27.437Z,1478845347.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:27.816Z,1478845347.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:27.830Z,1478845347.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T06:22:27.831Z,1478845347.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:28.221Z,1478845348.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:28.236Z,1478845348.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T06:22:28.237Z,1478845348.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:28.620Z,1478845348.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:28.634Z,1478845348.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T06:22:28.636Z,1478845348.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:29.019Z,1478845349.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:29.040Z,1478845349.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T06:22:29.041Z,1478845349.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:29.423Z,1478845349.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:29.438Z,1478845349.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T06:22:29.440Z,1478845349.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:29.820Z,1478845349.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:29.840Z,1478845349.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T06:22:29.841Z,1478845349.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:30.224Z,1478845350.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:30.244Z,1478845350.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T06:22:30.245Z,1478845350.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:30.613Z,1478845350.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:30.645Z,1478845350.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T06:22:30.646Z,1478845350.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:31.013Z,1478845351.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:31.046Z,1478845351.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T06:22:31.047Z,1478845351.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:31.413Z,1478845351.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:31.438Z,1478845351.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2016-11-11T06:22:31.439Z,1478845351.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:31.813Z,1478845351.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:31.845Z,1478845351.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:32.213Z,1478845352.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:32.244Z,1478845352.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:32.617Z,1478845352.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:32.641Z,1478845352.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:33.017Z,1478845353.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:33.043Z,1478845353.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:33.413Z,1478845353.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:33.471Z,1478845353.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:33.819Z,1478845353.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:33.848Z,1478845353.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:34.217Z,1478845354.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:34.273Z,1478845354.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:34.613Z,1478845354.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:34.656Z,1478845354.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:35.013Z,1478845355.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:35.056Z,1478845355.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:35.413Z,1478845355.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:35.465Z,1478845355.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:35.813Z,1478845355.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:35.856Z,1478845355.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:36.218Z,1478845356.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:36.265Z,1478845356.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:36.617Z,1478845356.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:36.672Z,1478845356.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:37.019Z,1478845357.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:37.034Z,1478845357.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:37.420Z,1478845357.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:37.435Z,1478845357.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:37.815Z,1478845357.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:37.847Z,1478845357.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:38.220Z,1478845358.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:38.235Z,1478845358.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:38.619Z,1478845358.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:38.648Z,1478845358.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:39.016Z,1478845359.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:39.048Z,1478845359.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:39.413Z,1478845359.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:39.447Z,1478845359.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:39.817Z,1478845359.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:39.832Z,1478845359.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:40.217Z,1478845360.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:40.233Z,1478845360.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:40.621Z,1478845360.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:40.636Z,1478845360.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:41.021Z,1478845361.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:41.041Z,1478845361.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:41.413Z,1478845361.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:41.444Z,1478845361.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:41.813Z,1478845361.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:41.829Z,1478845361.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:42.213Z,1478845362.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:42.234Z,1478845362.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:42.622Z,1478845362.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:42.638Z,1478845362.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:43.018Z,1478845363.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:43.038Z,1478845363.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:43.416Z,1478845363.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:43.431Z,1478845363.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:43.823Z,1478845363.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:43.839Z,1478845363.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:44.224Z,1478845364.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:44.239Z,1478845364.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:44.616Z,1478845364.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:44.649Z,1478845364.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:45.013Z,1478845365.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:45.045Z,1478845365.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:45.424Z,1478845365.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:45.445Z,1478845365.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:45.813Z,1478845365.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:45.845Z,1478845365.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:46.213Z,1478845366.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:46.245Z,1478845366.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:46.613Z,1478845366.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:46.648Z,1478845366.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:47.013Z,1478845367.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:47.045Z,1478845367.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:47.413Z,1478845367.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:47.445Z,1478845367.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:47.822Z,1478845367.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:47.853Z,1478845367.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:51.082Z,1478845371.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:51.169Z,1478845371.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:51.254Z,1478845371.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:51.286Z,1478845371.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:51.643Z,1478845371.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:51.691Z,1478845371.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:52.040Z,1478845372.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:52.061Z,1478845372.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:52.454Z,1478845372.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:52.505Z,1478845372.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:52.842Z,1478845372.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:52.899Z,1478845372.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:53.240Z,1478845373.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:53.261Z,1478845373.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:53.640Z,1478845373.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:53.663Z,1478845373.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:54.035Z,1478845374.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:54.069Z,1478845374.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:54.435Z,1478845374.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:54.468Z,1478845374.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:54.844Z,1478845374.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:54.860Z,1478845374.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:55.233Z,1478845375.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:55.267Z,1478845375.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:55.635Z,1478845375.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:55.662Z,1478845375.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:56.034Z,1478845376.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:56.066Z,1478845376.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:56.433Z,1478845376.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:56.476Z,1478845376.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:56.833Z,1478845376.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:56.848Z,1478845376.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:57.235Z,1478845377.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:57.250Z,1478845377.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:57.637Z,1478845377.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:57.657Z,1478845377.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:58.040Z,1478845378.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:58.055Z,1478845378.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:58.441Z,1478845378.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:58.456Z,1478845378.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:58.843Z,1478845378.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:58.865Z,1478845378.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:59.241Z,1478845379.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:59.261Z,1478845379.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:22:59.633Z,1478845379.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:22:59.665Z,1478845379.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:00.033Z,1478845380.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:00.065Z,1478845380.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:00.438Z,1478845380.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:00.464Z,1478845380.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:00.837Z,1478845380.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:00.869Z,1478845380.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:01.233Z,1478845381.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:01.273Z,1478845381.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:01.633Z,1478845381.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:01.653Z,1478845381.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:02.035Z,1478845382.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:02.050Z,1478845382.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:02.437Z,1478845382.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:02.457Z,1478845382.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:02.840Z,1478845382.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:02.855Z,1478845382.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:03.242Z,1478845383.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:03.262Z,1478845383.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:03.643Z,1478845383.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:03.667Z,1478845383.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:04.035Z,1478845384.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:04.069Z,1478845384.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:04.434Z,1478845384.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:04.466Z,1478845384.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:04.835Z,1478845384.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:04.953Z,1478845384.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:05.240Z,1478845385.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:05.267Z,1478845385.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:05.635Z,1478845385.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:05.667Z,1478845385.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:06.035Z,1478845386.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:06.093Z,1478845386.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:06.435Z,1478845386.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:06.477Z,1478845386.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:06.838Z,1478845386.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:06.898Z,1478845386.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:07.241Z,1478845387.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:07.258Z,1478845387.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:07.642Z,1478845387.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:07.693Z,1478845387.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:08.035Z,1478845388.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:08.068Z,1478845388.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:08.434Z,1478845388.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:08.481Z,1478845388.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:08.865Z,1478845388.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:08.922Z,1478845388.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:09.238Z,1478845389.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:09.282Z,1478845389.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:09.652Z,1478845389.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:09.699Z,1478845389.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:10.039Z,1478845390.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:10.093Z,1478845390.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:10.439Z,1478845390.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:10.487Z,1478845390.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:10.841Z,1478845390.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:10.866Z,1478845390.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:11.253Z,1478845391.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:11.294Z,1478845391.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:11.650Z,1478845391.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:11.684Z,1478845391.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:12.045Z,1478845392.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:12.060Z,1478845392.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:12.440Z,1478845392.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:12.454Z,1478845392.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:12.850Z,1478845392.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:12.877Z,1478845392.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:13.233Z,1478845393.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:13.299Z,1478845393.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:13.630Z,1478845393.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:13.669Z,1478845393.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:14.048Z,1478845394.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:14.090Z,1478845394.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:14.440Z,1478845394.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:14.461Z,1478845394.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:14.860Z,1478845394.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:14.875Z,1478845394.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:15.240Z,1478845395.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:15.255Z,1478845395.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:15.640Z,1478845395.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:15.669Z,1478845395.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:16.044Z,1478845396.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:16.081Z,1478845396.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:16.435Z,1478845396.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:16.474Z,1478845396.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:16.839Z,1478845396.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:16.884Z,1478845396.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:17.237Z,1478845397.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:17.254Z,1478845397.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:17.642Z,1478845397.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:17.689Z,1478845397.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:18.035Z,1478845398.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:18.069Z,1478845398.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:18.435Z,1478845398.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:18.469Z,1478845398.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:18.835Z,1478845398.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:18.879Z,1478845398.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:19.239Z,1478845399.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:19.321Z,1478845399.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:19.642Z,1478845399.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:19.741Z,1478845399.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:20.035Z,1478845400.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:20.066Z,1478845400.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:20.433Z,1478845400.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:20.486Z,1478845400.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:20.844Z,1478845400.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:20.867Z,1478845400.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:21.238Z,1478845401.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:21.295Z,1478845401.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:21.639Z,1478845401.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:21.693Z,1478845401.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:22.042Z,1478845402.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:22.069Z,1478845402.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:22.440Z,1478845402.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:22.468Z,1478845402.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:22.838Z,1478845402.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:22.905Z,1478845402.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:23.242Z,1478845403.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:23.289Z,1478845403.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:23.640Z,1478845403.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:23.655Z,1478845403.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:24.048Z,1478845404.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:24.064Z,1478845404.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:24.440Z,1478845404.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:24.460Z,1478845404.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:24.840Z,1478845404.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:24.863Z,1478845404.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:25.233Z,1478845405.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:25.258Z,1478845405.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:25.633Z,1478845405.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:25.666Z,1478845405.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:26.058Z,1478845406.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:26.074Z,1478845406.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:26.433Z,1478845406.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:26.459Z,1478845406.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:26.833Z,1478845406.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:26.886Z,1478845406.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:27.233Z,1478845407.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:27.261Z,1478845407.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:27.637Z,1478845407.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:27.673Z,1478845407.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:28.033Z,1478845408.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:28.075Z,1478845408.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:28.433Z,1478845408.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:28.448Z,1478845408.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:28.833Z,1478845408.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:28.853Z,1478845408.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:29.233Z,1478845409.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:29.253Z,1478845409.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:29.638Z,1478845409.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:29.653Z,1478845409.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:30.041Z,1478845410.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:30.061Z,1478845410.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:30.440Z,1478845410.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:30.461Z,1478845410.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:30.840Z,1478845410.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:30.856Z,1478845410.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:31.242Z,1478845411.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:31.258Z,1478845411.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:31.644Z,1478845411.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:31.659Z,1478845411.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:32.045Z,1478845412.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:32.065Z,1478845412.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:32.433Z,1478845412.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:32.468Z,1478845412.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:32.844Z,1478845412.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:32.869Z,1478845412.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:33.233Z,1478845413.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:33.265Z,1478845413.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:33.633Z,1478845413.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:33.762Z,1478845413.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:34.036Z,1478845414.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:34.052Z,1478845414.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:34.442Z,1478845414.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:34.458Z,1478845414.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:34.840Z,1478845414.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:34.893Z,1478845414.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:35.240Z,1478845415.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:35.261Z,1478845415.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:35.640Z,1478845415.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:35.701Z,1478845415.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:36.041Z,1478845416.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:36.093Z,1478845416.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:36.441Z,1478845416.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:36.456Z,1478845416.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:36.843Z,1478845416.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:36.859Z,1478845416.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:37.245Z,1478845417.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:37.261Z,1478845417.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:37.636Z,1478845417.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:37.668Z,1478845417.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:38.041Z,1478845418.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:38.056Z,1478845418.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:38.433Z,1478845418.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:38.461Z,1478845418.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:38.833Z,1478845418.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:38.876Z,1478845418.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:39.233Z,1478845419.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:39.248Z,1478845419.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:39.633Z,1478845419.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:39.653Z,1478845419.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:40.033Z,1478845420.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:40.053Z,1478845420.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:40.440Z,1478845420.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:40.455Z,1478845420.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:40.840Z,1478845420.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:40.857Z,1478845420.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:41.233Z,1478845421.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:41.273Z,1478845421.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:41.633Z,1478845421.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:41.706Z,1478845421.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:42.033Z,1478845422.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:42.067Z,1478845422.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:42.433Z,1478845422.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:42.467Z,1478845422.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:42.833Z,1478845422.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:42.858Z,1478845422.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:43.233Z,1478845423.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:43.268Z,1478845423.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:43.633Z,1478845423.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:43.665Z,1478845423.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:44.037Z,1478845424.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:44.063Z,1478845424.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:44.433Z,1478845424.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:44.468Z,1478845424.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:44.833Z,1478845424.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:44.869Z,1478845424.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:45.233Z,1478845425.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:45.269Z,1478845425.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:45.633Z,1478845425.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:45.668Z,1478845425.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:46.033Z,1478845426.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:46.072Z,1478845426.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:46.433Z,1478845426.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:46.461Z,1478845426.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:46.833Z,1478845426.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:46.848Z,1478845426.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:47.234Z,1478845427.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:47.306Z,1478845427.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:47.637Z,1478845427.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:47.652Z,1478845427.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:48.038Z,1478845428.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:48.053Z,1478845428.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:51.278Z,1478845431.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:51.361Z,1478845431.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:51.466Z,1478845431.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:51.497Z,1478845431.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:51.850Z,1478845431.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:51.903Z,1478845431.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:52.246Z,1478845432.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:52.265Z,1478845432.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:52.646Z,1478845432.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:52.707Z,1478845432.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:53.040Z,1478845433.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:53.095Z,1478845433.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:53.445Z,1478845433.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:53.465Z,1478845433.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:53.838Z,1478845433.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:53.870Z,1478845433.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:54.237Z,1478845434.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:54.274Z,1478845434.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:54.637Z,1478845434.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:54.669Z,1478845434.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:55.037Z,1478845435.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:55.054Z,1478845435.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:55.437Z,1478845435.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:55.458Z,1478845435.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:55.842Z,1478845435.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:55.858Z,1478845435.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:56.242Z,1478845436.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:56.257Z,1478845436.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:56.644Z,1478845436.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:56.659Z,1478845436.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:57.043Z,1478845437.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:57.058Z,1478845437.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:57.444Z,1478845437.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:57.459Z,1478845437.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:57.837Z,1478845437.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:57.872Z,1478845437.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:58.237Z,1478845438.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:58.273Z,1478845438.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:58.637Z,1478845438.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:58.660Z,1478845438.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:59.037Z,1478845439.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:59.080Z,1478845439.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:59.437Z,1478845439.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:59.480Z,1478845439.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:23:59.837Z,1478845439.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:23:59.852Z,1478845439.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:00.237Z,1478845440.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:00.257Z,1478845440.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:00.644Z,1478845440.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:00.659Z,1478845440.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:01.042Z,1478845441.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:01.058Z,1478845441.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:01.444Z,1478845441.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:01.460Z,1478845441.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:01.842Z,1478845441.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:01.861Z,1478845441.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:02.244Z,1478845442.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:02.260Z,1478845442.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:02.645Z,1478845442.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:02.681Z,1478845442.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:03.037Z,1478845443.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:03.072Z,1478845443.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:03.437Z,1478845443.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:03.469Z,1478845443.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:03.841Z,1478845443.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:03.868Z,1478845443.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:04.245Z,1478845444.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:04.284Z,1478845444.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:04.637Z,1478845444.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:04.677Z,1478845444.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:05.037Z,1478845445.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:05.099Z,1478845445.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:05.443Z,1478845445.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:05.495Z,1478845445.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:05.843Z,1478845445.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:05.858Z,1478845445.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:06.243Z,1478845446.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:06.306Z,1478845446.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:06.644Z,1478845446.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:06.659Z,1478845446.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:07.045Z,1478845447.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:07.102Z,1478845447.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:07.444Z,1478845447.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:07.509Z,1478845447.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:07.845Z,1478845447.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:07.865Z,1478845447.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:08.237Z,1478845448.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:08.269Z,1478845448.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:08.637Z,1478845448.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:08.669Z,1478845448.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:09.037Z,1478845449.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:09.070Z,1478845449.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:09.437Z,1478845449.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:09.469Z,1478845449.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:09.837Z,1478845449.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:09.871Z,1478845449.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:10.237Z,1478845450.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:10.283Z,1478845450.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:10.637Z,1478845450.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:10.653Z,1478845450.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:11.037Z,1478845451.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:11.066Z,1478845451.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:11.443Z,1478845451.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:11.461Z,1478845451.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:11.843Z,1478845451.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:11.858Z,1478845451.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:12.244Z,1478845452.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:12.259Z,1478845452.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:12.643Z,1478845452.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:12.669Z,1478845452.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:13.044Z,1478845453.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:13.060Z,1478845453.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:13.437Z,1478845453.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:13.473Z,1478845453.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:13.841Z,1478845453.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:13.861Z,1478845453.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:14.243Z,1478845454.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:14.259Z,1478845454.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:14.643Z,1478845454.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:14.665Z,1478845454.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:15.045Z,1478845455.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:15.060Z,1478845455.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:15.437Z,1478845455.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:15.473Z,1478845455.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:15.837Z,1478845455.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:15.869Z,1478845455.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:16.245Z,1478845456.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:16.281Z,1478845456.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:16.637Z,1478845456.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:16.653Z,1478845456.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:17.043Z,1478845457.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:17.059Z,1478845457.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:17.449Z,1478845457.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:17.464Z,1478845457.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:17.844Z,1478845457.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:17.860Z,1478845457.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:18.244Z,1478845458.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:18.262Z,1478845458.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:18.641Z,1478845458.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:18.673Z,1478845458.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:19.042Z,1478845459.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:19.093Z,1478845459.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:19.443Z,1478845459.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:19.505Z,1478845459.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:19.847Z,1478845459.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:19.867Z,1478845459.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:20.244Z,1478845460.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:20.301Z,1478845460.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:20.644Z,1478845460.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:20.665Z,1478845460.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:21.036Z,1478845461.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:21.095Z,1478845461.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:21.444Z,1478845461.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:21.503Z,1478845461.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:21.844Z,1478845461.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:21.865Z,1478845461.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:22.248Z,1478845462.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:22.273Z,1478845462.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:22.637Z,1478845462.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:22.676Z,1478845462.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:23.037Z,1478845463.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:23.075Z,1478845463.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:23.441Z,1478845463.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:23.467Z,1478845463.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:23.837Z,1478845463.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:23.861Z,1478845463.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:24.237Z,1478845464.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:24.283Z,1478845464.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:24.641Z,1478845464.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:24.676Z,1478845464.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:25.037Z,1478845465.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:25.057Z,1478845465.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:25.437Z,1478845465.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:25.457Z,1478845465.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:25.845Z,1478845465.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:25.864Z,1478845465.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:26.243Z,1478845466.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:26.262Z,1478845466.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:26.644Z,1478845466.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:26.665Z,1478845466.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:27.040Z,1478845467.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:27.069Z,1478845467.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:27.437Z,1478845467.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:27.477Z,1478845467.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:27.837Z,1478845467.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:27.869Z,1478845467.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:28.241Z,1478845468.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:28.266Z,1478845468.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:28.645Z,1478845468.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:28.674Z,1478845468.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:29.041Z,1478845469.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:29.080Z,1478845469.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:29.436Z,1478845469.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:29.467Z,1478845469.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:29.837Z,1478845469.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:29.852Z,1478845469.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:30.242Z,1478845470.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:30.275Z,1478845470.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:30.649Z,1478845470.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:30.667Z,1478845470.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:31.047Z,1478845471.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:31.062Z,1478845471.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:31.445Z,1478845471.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:31.479Z,1478845471.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:31.838Z,1478845471.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:31.869Z,1478845471.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:32.252Z,1478845472.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:32.276Z,1478845472.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:32.640Z,1478845472.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:32.673Z,1478845472.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:33.038Z,1478845473.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:33.078Z,1478845473.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:33.438Z,1478845473.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:33.475Z,1478845473.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:33.844Z,1478845473.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:33.916Z,1478845473.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:34.251Z,1478845474.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:34.266Z,1478845474.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:34.643Z,1478845474.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:34.705Z,1478845474.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:35.047Z,1478845475.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:35.067Z,1478845475.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:35.448Z,1478845475.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:35.503Z,1478845475.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:35.847Z,1478845475.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:35.904Z,1478845475.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:36.245Z,1478845476.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:36.277Z,1478845476.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:36.649Z,1478845476.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:36.666Z,1478845476.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:37.051Z,1478845477.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:37.067Z,1478845477.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:37.438Z,1478845477.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:37.472Z,1478845477.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:37.837Z,1478845477.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:37.870Z,1478845477.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:38.237Z,1478845478.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:38.276Z,1478845478.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:38.638Z,1478845478.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:38.669Z,1478845478.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:39.039Z,1478845479.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:39.074Z,1478845479.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:39.437Z,1478845479.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:39.481Z,1478845479.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:39.837Z,1478845479.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:39.861Z,1478845479.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:40.238Z,1478845480.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:40.261Z,1478845480.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:40.639Z,1478845480.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:40.654Z,1478845480.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:41.042Z,1478845481.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:41.067Z,1478845481.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:41.441Z,1478845481.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:41.465Z,1478845481.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:41.847Z,1478845481.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:41.863Z,1478845481.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:42.246Z,1478845482.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:42.261Z,1478845482.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:42.644Z,1478845482.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:42.670Z,1478845482.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:43.040Z,1478845483.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:43.053Z,1478845483.053 [PNI_TCM](ERROR): CRC does not match. Expected:0x58697 got:0x49014
2016-11-11T06:24:43.075Z,1478845483.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:43.439Z,1478845483.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:43.473Z,1478845483.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:43.842Z,1478845483.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:43.868Z,1478845483.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:44.237Z,1478845484.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:44.277Z,1478845484.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:44.638Z,1478845484.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:44.657Z,1478845484.657 [PNI_TCM](ERROR): CRC does not match. Expected:0x56494 got:0x7361
2016-11-11T06:24:44.685Z,1478845484.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:45.039Z,1478845485.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:45.067Z,1478845485.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:45.439Z,1478845485.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:45.473Z,1478845485.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:45.841Z,1478845485.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:45.870Z,1478845485.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:46.239Z,1478845486.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:46.272Z,1478845486.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:46.643Z,1478845486.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:46.669Z,1478845486.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:46.682Z,1478845486.682 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T06:24:46.682Z,1478845486.682 [Default:CheckIn:C.Wait] Stopped
2016-11-11T06:24:46.682Z,1478845486.682 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T06:24:46.682Z,1478845486.682 [Default:CheckIn:D] Running Loop=1
2016-11-11T06:24:47.049Z,1478845487.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:47.064Z,1478845487.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:47.072Z,1478845487.072 [Default:CheckIn:D] Stopped
2016-11-11T06:24:47.072Z,1478845487.072 [Default:CheckIn:E] Running Loop=1
2016-11-11T06:24:47.444Z,1478845487.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:47.475Z,1478845487.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:47.493Z,1478845487.493 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 94.762703 min 
2016-11-11T06:24:47.493Z,1478845487.493 [Default:CheckIn:E] Stopped
2016-11-11T06:24:47.493Z,1478845487.493 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T06:24:47.493Z,1478845487.493 [Default:CheckIn] Stopped
2016-11-11T06:24:47.493Z,1478845487.493 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T06:24:47.493Z,1478845487.493 [Default:CheckIn](INFO): Running loop #10
2016-11-11T06:24:47.493Z,1478845487.493 [Default:CheckIn] Running Loop=10
2016-11-11T06:24:47.493Z,1478845487.493 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T06:24:47.494Z,1478845487.494 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T06:24:47.846Z,1478845487.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:47.909Z,1478845487.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:48.221Z,1478845488.221 [NAL9602](INFO): Powering up
2016-11-11T06:24:48.241Z,1478845488.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:48.305Z,1478845488.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:51.646Z,1478845491.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:51.661Z,1478845491.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:51.780Z,1478845491.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:51.826Z,1478845491.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:52.153Z,1478845492.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:52.193Z,1478845492.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:52.557Z,1478845492.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:52.583Z,1478845492.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:52.953Z,1478845492.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:53.001Z,1478845493.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:53.353Z,1478845493.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:53.401Z,1478845493.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:53.753Z,1478845493.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:53.785Z,1478845493.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:54.153Z,1478845494.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:54.173Z,1478845494.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:54.556Z,1478845494.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:54.577Z,1478845494.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:54.956Z,1478845494.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:54.972Z,1478845494.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:55.360Z,1478845495.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:55.376Z,1478845495.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:55.759Z,1478845495.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:55.781Z,1478845495.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:56.160Z,1478845496.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:56.176Z,1478845496.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:56.560Z,1478845496.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:56.576Z,1478845496.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:56.970Z,1478845496.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:56.986Z,1478845496.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:57.360Z,1478845497.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:57.383Z,1478845497.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:57.753Z,1478845497.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:57.785Z,1478845497.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:58.153Z,1478845498.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:58.193Z,1478845498.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:58.553Z,1478845498.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:58.589Z,1478845498.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:58.968Z,1478845498.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:58.000Z,1478845499.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:59.342Z,1478845499.342 [NAL9602](INFO): NAL9602 initialized
2016-11-11T06:24:59.358Z,1478845499.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:59.374Z,1478845499.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:24:59.760Z,1478845499.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:24:59.781Z,1478845499.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:00.168Z,1478845500.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:00.184Z,1478845500.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:00.568Z,1478845500.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:00.584Z,1478845500.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:00.966Z,1478845500.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:00.981Z,1478845500.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:01.369Z,1478845501.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:01.385Z,1478845501.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:01.756Z,1478845501.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:01.789Z,1478845501.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:02.154Z,1478845502.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:02.190Z,1478845502.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:02.554Z,1478845502.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:02.585Z,1478845502.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:02.953Z,1478845502.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:02.969Z,1478845502.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:03.359Z,1478845503.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:03.388Z,1478845503.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:03.761Z,1478845503.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:03.777Z,1478845503.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:04.161Z,1478845504.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:04.177Z,1478845504.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:04.562Z,1478845504.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:04.577Z,1478845504.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:04.957Z,1478845504.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:04.989Z,1478845504.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:05.357Z,1478845505.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:05.419Z,1478845505.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:05.761Z,1478845505.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:05.818Z,1478845505.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:06.154Z,1478845506.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:06.182Z,1478845506.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:06.553Z,1478845506.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:06.605Z,1478845506.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:06.953Z,1478845506.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:06.986Z,1478845506.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:07.354Z,1478845507.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:07.401Z,1478845507.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:07.753Z,1478845507.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:07.805Z,1478845507.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:08.153Z,1478845508.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:08.189Z,1478845508.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:08.553Z,1478845508.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:08.581Z,1478845508.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:08.958Z,1478845508.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:08.986Z,1478845508.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:09.353Z,1478845509.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:09.373Z,1478845509.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:09.757Z,1478845509.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:09.772Z,1478845509.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:10.158Z,1478845510.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:10.189Z,1478845510.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:10.560Z,1478845510.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:10.581Z,1478845510.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:10.962Z,1478845510.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:10.980Z,1478845510.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:11.356Z,1478845511.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:11.388Z,1478845511.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:11.753Z,1478845511.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:11.787Z,1478845511.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:12.153Z,1478845512.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:12.188Z,1478845512.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:12.553Z,1478845512.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:12.588Z,1478845512.588 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:12.588Z,1478845512.588 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2016-11-11T06:25:12.588Z,1478845512.588 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:25:12.599Z,1478845512.599 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:12.603Z,1478845512.603 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2016-11-11T06:25:12.603Z,1478845512.603 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:25:12.635Z,1478845512.635 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:25:12.636Z,1478845512.635 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:25:12.959Z,1478845512.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:13.020Z,1478845513.020 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:25:13.020Z,1478845513.020 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2016-11-11T06:25:13.021Z,1478845513.021 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:25:13.021Z,1478845513.021 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2016-11-11T06:25:13.362Z,1478845513.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:13.376Z,1478845513.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:25:13.376Z,1478845513.376 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:25:13.377Z,1478845513.376 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:25:13.381Z,1478845513.381 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:25:13.382Z,1478845513.382 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:25:13.382Z,1478845513.382 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:25:13.756Z,1478845513.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:13.784Z,1478845513.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:25:13.785Z,1478845513.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:14.161Z,1478845514.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:14.184Z,1478845514.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:25:14.185Z,1478845514.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:14.554Z,1478845514.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:14.580Z,1478845514.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:25:14.581Z,1478845514.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:14.958Z,1478845514.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:14.991Z,1478845514.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T06:25:14.997Z,1478845514.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:15.353Z,1478845515.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:15.383Z,1478845515.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T06:25:15.385Z,1478845515.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:15.758Z,1478845515.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:15.789Z,1478845515.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T06:25:15.790Z,1478845515.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:16.154Z,1478845516.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:16.173Z,1478845516.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T06:25:16.174Z,1478845516.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:16.559Z,1478845516.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:16.574Z,1478845516.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T06:25:16.575Z,1478845516.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:16.961Z,1478845516.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:16.978Z,1478845516.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T06:25:16.980Z,1478845516.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:17.005Z,1478845517.005 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:17.005Z,1478845517.005 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 13
2016-11-11T06:25:17.005Z,1478845517.005 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:25:17.032Z,1478845517.032 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:25:17.357Z,1478845517.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:17.382Z,1478845517.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T06:25:17.388Z,1478845517.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:17.427Z,1478845517.427 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:25:17.428Z,1478845517.428 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 13
2016-11-11T06:25:17.756Z,1478845517.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:17.785Z,1478845517.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T06:25:17.786Z,1478845517.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:17.791Z,1478845517.792 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:25:17.792Z,1478845517.792 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:25:17.792Z,1478845517.792 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:25:18.164Z,1478845518.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:18.184Z,1478845518.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T06:25:18.186Z,1478845518.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:18.565Z,1478845518.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:18.589Z,1478845518.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T06:25:18.590Z,1478845518.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:18.953Z,1478845518.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:18.978Z,1478845518.978 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T06:25:18.984Z,1478845518.984 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:25:18.984Z,1478845518.984 [BPC1](ERROR): Data Fault
2016-11-11T06:25:19.017Z,1478845519.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T06:25:19.018Z,1478845519.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:19.057Z,1478845519.057 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:25:19.353Z,1478845519.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:19.384Z,1478845519.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T06:25:19.386Z,1478845519.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:19.753Z,1478845519.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:19.793Z,1478845519.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T06:25:19.794Z,1478845519.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:20.153Z,1478845520.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:20.175Z,1478845520.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T06:25:20.202Z,1478845520.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:20.221Z,1478845520.221 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:25:20.221Z,1478845520.221 [BPC1] No Fault, FailCount= 1
2016-11-11T06:25:20.553Z,1478845520.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:20.641Z,1478845520.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2016-11-11T06:25:20.642Z,1478845520.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:20.958Z,1478845520.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:21.004Z,1478845521.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T06:25:21.005Z,1478845521.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:21.353Z,1478845521.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:21.372Z,1478845521.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T06:25:21.373Z,1478845521.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:21.757Z,1478845521.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:21.774Z,1478845521.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T06:25:21.776Z,1478845521.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:22.157Z,1478845522.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:22.183Z,1478845522.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T06:25:22.184Z,1478845522.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:22.560Z,1478845522.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:22.580Z,1478845522.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T06:25:22.581Z,1478845522.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:22.961Z,1478845522.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:22.977Z,1478845522.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T06:25:22.979Z,1478845522.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:23.356Z,1478845523.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:23.378Z,1478845523.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T06:25:23.383Z,1478845523.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:23.765Z,1478845523.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:23.779Z,1478845523.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T06:25:23.780Z,1478845523.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:24.154Z,1478845524.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:24.195Z,1478845524.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T06:25:24.196Z,1478845524.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:24.554Z,1478845524.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:24.582Z,1478845524.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T06:25:24.584Z,1478845524.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:24.973Z,1478845524.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:24.987Z,1478845524.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T06:25:24.988Z,1478845524.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:25.361Z,1478845525.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:25.396Z,1478845525.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T06:25:25.397Z,1478845525.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:25.753Z,1478845525.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:25.786Z,1478845525.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T06:25:25.788Z,1478845525.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:26.153Z,1478845526.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:26.192Z,1478845526.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T06:25:26.193Z,1478845526.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:26.558Z,1478845526.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:26.590Z,1478845526.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T06:25:26.596Z,1478845526.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:26.954Z,1478845526.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:26.971Z,1478845526.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T06:25:26.984Z,1478845526.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:27.353Z,1478845527.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:27.400Z,1478845527.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T06:25:27.401Z,1478845527.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:27.754Z,1478845527.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:27.769Z,1478845527.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T06:25:27.771Z,1478845527.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:28.153Z,1478845528.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:28.172Z,1478845528.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T06:25:28.173Z,1478845528.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:28.558Z,1478845528.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:28.576Z,1478845528.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T06:25:28.577Z,1478845528.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:28.956Z,1478845528.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:28.990Z,1478845528.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T06:25:29.005Z,1478845529.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:29.356Z,1478845529.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:29.389Z,1478845529.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T06:25:29.390Z,1478845529.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:29.762Z,1478845529.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:29.778Z,1478845529.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T06:25:29.779Z,1478845529.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:30.157Z,1478845530.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:30.184Z,1478845530.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T06:25:30.185Z,1478845530.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:30.553Z,1478845530.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:30.593Z,1478845530.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T06:25:30.594Z,1478845530.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:30.970Z,1478845530.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:30.997Z,1478845530.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T06:25:30.998Z,1478845530.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:31.341Z,1478845531.341 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-11T06:25:31.419Z,1478845531.419 [NAL9602](FAULT): received: 
+CSQ:0

OK0, 2, 0, 0, 0

OK
2016-11-11T06:25:31.419Z,1478845531.419 [NAL9602] Data Fault, FailCount= 2
2016-11-11T06:25:31.419Z,1478845531.420 [NAL9602](ERROR): Data Fault
2016-11-11T06:25:31.437Z,1478845531.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:31.457Z,1478845531.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2016-11-11T06:25:31.458Z,1478845531.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:31.514Z,1478845531.514 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T06:25:31.737Z,1478845531.737 [NAL9602](INFO): Powering down
2016-11-11T06:25:31.756Z,1478845531.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:31.794Z,1478845531.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T06:25:31.795Z,1478845531.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:32.157Z,1478845532.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:32.193Z,1478845532.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T06:25:32.194Z,1478845532.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:32.553Z,1478845532.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:32.583Z,1478845532.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2016-11-11T06:25:32.588Z,1478845532.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:32.628Z,1478845532.628 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T06:25:32.629Z,1478845532.629 [NAL9602] No Fault, FailCount= 2
2016-11-11T06:25:32.954Z,1478845532.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:33.037Z,1478845533.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:33.355Z,1478845533.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:33.385Z,1478845533.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:33.756Z,1478845533.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:33.813Z,1478845533.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:34.161Z,1478845534.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:34.178Z,1478845534.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:34.563Z,1478845534.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:34.611Z,1478845534.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:34.966Z,1478845534.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:35.021Z,1478845535.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:35.360Z,1478845535.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:35.393Z,1478845535.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:35.761Z,1478845535.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:35.830Z,1478845535.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.437800 seconds old.
2016-11-11T06:25:35.831Z,1478845535.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:35.832Z,1478845535.832 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.438200 seconds old.
2016-11-11T06:25:35.835Z,1478845535.835 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.419200 seconds old.
2016-11-11T06:25:35.837Z,1478845535.837 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.419400 seconds old.
2016-11-11T06:25:35.838Z,1478845535.838 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.419700 seconds old.
2016-11-11T06:25:36.158Z,1478845536.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:36.180Z,1478845536.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.787800 seconds old.
2016-11-11T06:25:36.181Z,1478845536.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:36.182Z,1478845536.182 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.788100 seconds old.
2016-11-11T06:25:36.184Z,1478845536.184 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.769200 seconds old.
2016-11-11T06:25:36.187Z,1478845536.187 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.769300 seconds old.
2016-11-11T06:25:36.188Z,1478845536.188 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.769900 seconds old.
2016-11-11T06:25:36.566Z,1478845536.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:36.579Z,1478845536.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.187400 seconds old.
2016-11-11T06:25:36.581Z,1478845536.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:36.581Z,1478845536.582 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.187700 seconds old.
2016-11-11T06:25:36.584Z,1478845536.584 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.168600 seconds old.
2016-11-11T06:25:36.586Z,1478845536.586 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.168700 seconds old.
2016-11-11T06:25:36.587Z,1478845536.588 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.169100 seconds old.
2016-11-11T06:25:36.941Z,1478845536.941 [NAL9602](INFO): Powering up NAL9602
2016-11-11T06:25:36.969Z,1478845536.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:36.998Z,1478845536.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.606300 seconds old.
2016-11-11T06:25:36.999Z,1478845537.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:37.000Z,1478845537.000 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.606700 seconds old.
2016-11-11T06:25:37.003Z,1478845537.003 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.587500 seconds old.
2016-11-11T06:25:37.017Z,1478845537.017 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.599900 seconds old.
2016-11-11T06:25:37.019Z,1478845537.019 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.600200 seconds old.
2016-11-11T06:25:37.368Z,1478845537.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:37.382Z,1478845537.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.989600 seconds old.
2016-11-11T06:25:37.383Z,1478845537.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:37.384Z,1478845537.384 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.990000 seconds old.
2016-11-11T06:25:37.386Z,1478845537.386 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.971000 seconds old.
2016-11-11T06:25:37.389Z,1478845537.389 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.971300 seconds old.
2016-11-11T06:25:37.390Z,1478845537.390 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.971700 seconds old.
2016-11-11T06:25:37.755Z,1478845537.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:37.787Z,1478845537.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.394900 seconds old.
2016-11-11T06:25:37.788Z,1478845537.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:37.789Z,1478845537.789 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.395300 seconds old.
2016-11-11T06:25:37.791Z,1478845537.791 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 2.376200 seconds old.
2016-11-11T06:25:37.794Z,1478845537.794 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.376300 seconds old.
2016-11-11T06:25:37.795Z,1478845537.795 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 2.376600 seconds old.
2016-11-11T06:25:38.155Z,1478845538.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:38.187Z,1478845538.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.794900 seconds old.
2016-11-11T06:25:38.188Z,1478845538.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:38.189Z,1478845538.189 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.795300 seconds old.
2016-11-11T06:25:38.191Z,1478845538.191 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 2.776300 seconds old.
2016-11-11T06:25:38.194Z,1478845538.194 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.776600 seconds old.
2016-11-11T06:25:38.195Z,1478845538.195 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 2.777000 seconds old.
2016-11-11T06:25:38.569Z,1478845538.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:38.589Z,1478845538.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.197000 seconds old.
2016-11-11T06:25:38.590Z,1478845538.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:38.591Z,1478845538.591 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.197300 seconds old.
2016-11-11T06:25:38.594Z,1478845538.594 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 3.178400 seconds old.
2016-11-11T06:25:38.596Z,1478845538.596 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.178700 seconds old.
2016-11-11T06:25:38.598Z,1478845538.598 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 3.179000 seconds old.
2016-11-11T06:25:38.959Z,1478845538.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:38.985Z,1478845538.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.593000 seconds old.
2016-11-11T06:25:38.986Z,1478845538.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:38.987Z,1478845538.987 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.593300 seconds old.
2016-11-11T06:25:38.989Z,1478845538.990 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 3.574200 seconds old.
2016-11-11T06:25:38.992Z,1478845538.992 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.574400 seconds old.
2016-11-11T06:25:38.993Z,1478845538.993 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 3.574700 seconds old.
2016-11-11T06:25:39.355Z,1478845539.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:39.387Z,1478845539.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.994900 seconds old.
2016-11-11T06:25:39.388Z,1478845539.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:39.389Z,1478845539.389 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.995200 seconds old.
2016-11-11T06:25:39.391Z,1478845539.391 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 3.976100 seconds old.
2016-11-11T06:25:39.394Z,1478845539.394 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.976200 seconds old.
2016-11-11T06:25:39.395Z,1478845539.395 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 3.976600 seconds old.
2016-11-11T06:25:39.754Z,1478845539.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:39.784Z,1478845539.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.392100 seconds old.
2016-11-11T06:25:39.785Z,1478845539.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:39.786Z,1478845539.786 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.392400 seconds old.
2016-11-11T06:25:39.793Z,1478845539.793 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 4.377500 seconds old.
2016-11-11T06:25:39.799Z,1478845539.799 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.377700 seconds old.
2016-11-11T06:25:39.801Z,1478845539.801 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 4.382300 seconds old.
2016-11-11T06:25:40.153Z,1478845540.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:40.191Z,1478845540.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.799500 seconds old.
2016-11-11T06:25:40.193Z,1478845540.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:40.194Z,1478845540.194 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.799800 seconds old.
2016-11-11T06:25:40.196Z,1478845540.196 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 4.780700 seconds old.
2016-11-11T06:25:40.198Z,1478845540.198 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.780900 seconds old.
2016-11-11T06:25:40.200Z,1478845540.200 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 4.781300 seconds old.
2016-11-11T06:25:40.555Z,1478845540.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:40.569Z,1478845540.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.177400 seconds old.
2016-11-11T06:25:40.571Z,1478845540.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:40.584Z,1478845540.584 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.189800 seconds old.
2016-11-11T06:25:40.586Z,1478845540.586 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 5.170800 seconds old.
2016-11-11T06:25:40.600Z,1478845540.600 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.182200 seconds old.
2016-11-11T06:25:40.601Z,1478845540.601 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 5.182500 seconds old.
2016-11-11T06:25:40.956Z,1478845540.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:40.982Z,1478845540.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.590000 seconds old.
2016-11-11T06:25:40.987Z,1478845540.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:40.988Z,1478845540.988 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.594600 seconds old.
2016-11-11T06:25:40.991Z,1478845540.991 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 5.575400 seconds old.
2016-11-11T06:25:40.997Z,1478845540.997 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.579800 seconds old.
2016-11-11T06:25:40.999Z,1478845540.999 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 5.580100 seconds old.
2016-11-11T06:25:41.363Z,1478845541.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:41.383Z,1478845541.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.991300 seconds old.
2016-11-11T06:25:41.384Z,1478845541.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:41.385Z,1478845541.385 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.991700 seconds old.
2016-11-11T06:25:41.388Z,1478845541.388 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 5.972500 seconds old.
2016-11-11T06:25:41.390Z,1478845541.390 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.972700 seconds old.
2016-11-11T06:25:41.391Z,1478845541.391 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 5.973000 seconds old.
2016-11-11T06:25:41.764Z,1478845541.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:41.779Z,1478845541.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.386600 seconds old.
2016-11-11T06:25:41.780Z,1478845541.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:41.781Z,1478845541.781 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.386900 seconds old.
2016-11-11T06:25:41.783Z,1478845541.783 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 6.367800 seconds old.
2016-11-11T06:25:41.785Z,1478845541.785 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.368000 seconds old.
2016-11-11T06:25:41.787Z,1478845541.787 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 6.368300 seconds old.
2016-11-11T06:25:42.158Z,1478845542.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:42.192Z,1478845542.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.799700 seconds old.
2016-11-11T06:25:42.193Z,1478845542.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:42.194Z,1478845542.194 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.800000 seconds old.
2016-11-11T06:25:42.200Z,1478845542.200 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 6.785100 seconds old.
2016-11-11T06:25:42.203Z,1478845542.203 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.785300 seconds old.
2016-11-11T06:25:42.208Z,1478845542.208 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 6.789900 seconds old.
2016-11-11T06:25:42.565Z,1478845542.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:42.583Z,1478845542.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.191400 seconds old.
2016-11-11T06:25:42.585Z,1478845542.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:42.585Z,1478845542.585 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.191700 seconds old.
2016-11-11T06:25:42.588Z,1478845542.588 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 7.172600 seconds old.
2016-11-11T06:25:42.590Z,1478845542.590 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.172700 seconds old.
2016-11-11T06:25:42.591Z,1478845542.592 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 7.173100 seconds old.
2016-11-11T06:25:42.958Z,1478845542.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:42.984Z,1478845542.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.591500 seconds old.
2016-11-11T06:25:42.985Z,1478845542.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:42.986Z,1478845542.986 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.591900 seconds old.
2016-11-11T06:25:42.988Z,1478845542.988 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 7.572800 seconds old.
2016-11-11T06:25:42.990Z,1478845542.990 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.572900 seconds old.
2016-11-11T06:25:42.992Z,1478845542.992 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 7.573300 seconds old.
2016-11-11T06:25:43.354Z,1478845543.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:43.392Z,1478845543.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.999700 seconds old.
2016-11-11T06:25:43.393Z,1478845543.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:43.394Z,1478845543.394 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.000000 seconds old.
2016-11-11T06:25:43.396Z,1478845543.396 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 7.981200 seconds old.
2016-11-11T06:25:43.399Z,1478845543.399 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.981300 seconds old.
2016-11-11T06:25:43.400Z,1478845543.400 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 7.981800 seconds old.
2016-11-11T06:25:43.755Z,1478845543.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:43.787Z,1478845543.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.395300 seconds old.
2016-11-11T06:25:43.788Z,1478845543.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:43.789Z,1478845543.789 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.395700 seconds old.
2016-11-11T06:25:43.792Z,1478845543.792 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 8.376500 seconds old.
2016-11-11T06:25:43.794Z,1478845543.794 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.376700 seconds old.
2016-11-11T06:25:43.795Z,1478845543.796 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 8.377100 seconds old.
2016-11-11T06:25:44.158Z,1478845544.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:44.194Z,1478845544.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.801900 seconds old.
2016-11-11T06:25:44.195Z,1478845544.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:44.196Z,1478845544.196 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.802300 seconds old.
2016-11-11T06:25:44.198Z,1478845544.198 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 8.783100 seconds old.
2016-11-11T06:25:44.201Z,1478845544.201 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.783300 seconds old.
2016-11-11T06:25:44.202Z,1478845544.202 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 8.783600 seconds old.
2016-11-11T06:25:44.553Z,1478845544.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:44.585Z,1478845544.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.192500 seconds old.
2016-11-11T06:25:44.586Z,1478845544.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:44.587Z,1478845544.587 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.192900 seconds old.
2016-11-11T06:25:44.593Z,1478845544.593 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 9.178000 seconds old.
2016-11-11T06:25:44.600Z,1478845544.600 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.182400 seconds old.
2016-11-11T06:25:44.601Z,1478845544.601 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 9.182700 seconds old.
2016-11-11T06:25:44.955Z,1478845544.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:44.988Z,1478845544.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.596200 seconds old.
2016-11-11T06:25:44.989Z,1478845544.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:44.990Z,1478845544.990 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.596500 seconds old.
2016-11-11T06:25:44.996Z,1478845544.996 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 9.580400 seconds old.
2016-11-11T06:25:44.998Z,1478845544.998 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.580600 seconds old.
2016-11-11T06:25:44.999Z,1478845544.999 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 9.580900 seconds old.
2016-11-11T06:25:45.355Z,1478845545.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:45.369Z,1478845545.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.976700 seconds old.
2016-11-11T06:25:45.370Z,1478845545.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:45.371Z,1478845545.371 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.977000 seconds old.
2016-11-11T06:25:45.374Z,1478845545.374 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 9.958900 seconds old.
2016-11-11T06:25:45.377Z,1478845545.377 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.959100 seconds old.
2016-11-11T06:25:45.378Z,1478845545.378 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 9.959500 seconds old.
2016-11-11T06:25:45.755Z,1478845545.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:45.778Z,1478845545.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.386000 seconds old.
2016-11-11T06:25:45.779Z,1478845545.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:45.780Z,1478845545.780 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.386600 seconds old.
2016-11-11T06:25:45.783Z,1478845545.783 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 10.367600 seconds old.
2016-11-11T06:25:45.794Z,1478845545.793 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.376000 seconds old.
2016-11-11T06:25:45.795Z,1478845545.795 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 10.376400 seconds old.
2016-11-11T06:25:46.160Z,1478845546.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:46.174Z,1478845546.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.782100 seconds old.
2016-11-11T06:25:46.176Z,1478845546.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:46.176Z,1478845546.176 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.782700 seconds old.
2016-11-11T06:25:46.179Z,1478845546.179 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 10.763600 seconds old.
2016-11-11T06:25:46.182Z,1478845546.182 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.764500 seconds old.
2016-11-11T06:25:46.183Z,1478845546.183 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 10.764900 seconds old.
2016-11-11T06:25:46.562Z,1478845546.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:46.580Z,1478845546.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.187700 seconds old.
2016-11-11T06:25:46.581Z,1478845546.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:46.582Z,1478845546.582 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.188000 seconds old.
2016-11-11T06:25:46.585Z,1478845546.585 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 11.170100 seconds old.
2016-11-11T06:25:46.588Z,1478845546.588 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.170500 seconds old.
2016-11-11T06:25:46.589Z,1478845546.589 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 11.170800 seconds old.
2016-11-11T06:25:46.976Z,1478845546.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:47.013Z,1478845547.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.620500 seconds old.
2016-11-11T06:25:47.014Z,1478845547.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:47.015Z,1478845547.015 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.620900 seconds old.
2016-11-11T06:25:47.021Z,1478845547.021 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 11.606000 seconds old.
2016-11-11T06:25:47.028Z,1478845547.028 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.610300 seconds old.
2016-11-11T06:25:47.029Z,1478845547.029 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 11.610700 seconds old.
2016-11-11T06:25:47.373Z,1478845547.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:47.392Z,1478845547.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 12.000400 seconds old.
2016-11-11T06:25:47.394Z,1478845547.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:47.394Z,1478845547.395 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.000700 seconds old.
2016-11-11T06:25:47.397Z,1478845547.397 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 11.981800 seconds old.
2016-11-11T06:25:47.416Z,1478845547.416 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.998200 seconds old.
2016-11-11T06:25:47.417Z,1478845547.417 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 11.998600 seconds old.
2016-11-11T06:25:47.737Z,1478845547.737 [NAL9602](INFO): NAL9602 initialized
2016-11-11T06:25:47.761Z,1478845547.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:47.819Z,1478845547.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 12.427400 seconds old.
2016-11-11T06:25:47.821Z,1478845547.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:47.822Z,1478845547.822 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.427800 seconds old.
2016-11-11T06:25:47.824Z,1478845547.824 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 12.408700 seconds old.
2016-11-11T06:25:47.826Z,1478845547.826 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.408900 seconds old.
2016-11-11T06:25:47.840Z,1478845547.840 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 12.421200 seconds old.
2016-11-11T06:25:47.860Z,1478845547.860 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T06:25:48.156Z,1478845548.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:48.195Z,1478845548.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 12.802900 seconds old.
2016-11-11T06:25:48.197Z,1478845548.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:48.198Z,1478845548.198 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.803800 seconds old.
2016-11-11T06:25:48.201Z,1478845548.201 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 12.785600 seconds old.
2016-11-11T06:25:48.204Z,1478845548.204 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.786200 seconds old.
2016-11-11T06:25:48.205Z,1478845548.205 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 12.786600 seconds old.
2016-11-11T06:25:48.538Z,1478845548.538 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T06:25:48.538Z,1478845548.538 [NAL9602] Data Fault, FailCount= 3
2016-11-11T06:25:48.538Z,1478845548.538 [NAL9602](ERROR): Data Fault
2016-11-11T06:25:48.558Z,1478845548.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:48.622Z,1478845548.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 13.230100 seconds old.
2016-11-11T06:25:48.623Z,1478845548.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:48.624Z,1478845548.624 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.230700 seconds old.
2016-11-11T06:25:48.627Z,1478845548.627 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 13.211600 seconds old.
2016-11-11T06:25:48.629Z,1478845548.629 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.212000 seconds old.
2016-11-11T06:25:48.631Z,1478845548.631 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 13.212400 seconds old.
2016-11-11T06:25:48.645Z,1478845548.645 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T06:25:51.971Z,1478845551.971 [NAL9602](INFO): Powering down
2016-11-11T06:25:51.989Z,1478845551.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:52.003Z,1478845552.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 16.611000 seconds old.
2016-11-11T06:25:52.004Z,1478845552.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:52.005Z,1478845552.006 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 16.611700 seconds old.
2016-11-11T06:25:52.008Z,1478845552.008 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 16.593000 seconds old.
2016-11-11T06:25:52.011Z,1478845552.011 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.593300 seconds old.
2016-11-11T06:25:52.012Z,1478845552.012 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 16.593900 seconds old.
2016-11-11T06:25:52.110Z,1478845552.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:52.156Z,1478845552.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 16.764500 seconds old.
2016-11-11T06:25:52.158Z,1478845552.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:52.159Z,1478845552.159 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 16.764800 seconds old.
2016-11-11T06:25:52.161Z,1478845552.161 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 16.745900 seconds old.
2016-11-11T06:25:52.164Z,1478845552.164 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.746300 seconds old.
2016-11-11T06:25:52.165Z,1478845552.165 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 16.746700 seconds old.
2016-11-11T06:25:52.495Z,1478845552.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:52.511Z,1478845552.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:52.554Z,1478845552.554 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T06:25:52.554Z,1478845552.554 [NAL9602] No Fault, FailCount= 3
2016-11-11T06:25:52.895Z,1478845552.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:52.953Z,1478845552.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:53.296Z,1478845553.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:53.312Z,1478845553.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:53.699Z,1478845553.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:53.714Z,1478845553.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:54.096Z,1478845554.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:54.115Z,1478845554.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:54.497Z,1478845554.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:54.512Z,1478845554.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:54.889Z,1478845554.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:54.922Z,1478845554.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:55.289Z,1478845555.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:55.327Z,1478845555.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:55.689Z,1478845555.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:55.718Z,1478845555.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:56.089Z,1478845556.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:56.123Z,1478845556.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:56.489Z,1478845556.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:56.522Z,1478845556.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:56.893Z,1478845556.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:56.909Z,1478845556.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:57.273Z,1478845557.273 [NAL9602](INFO): Powering up NAL9602
2016-11-11T06:25:57.290Z,1478845557.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:57.313Z,1478845557.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:57.695Z,1478845557.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:57.710Z,1478845557.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:58.096Z,1478845558.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:58.112Z,1478845558.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:58.495Z,1478845558.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:58.521Z,1478845558.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:58.895Z,1478845558.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:58.914Z,1478845558.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:59.299Z,1478845559.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:59.315Z,1478845559.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:25:59.700Z,1478845559.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:25:59.723Z,1478845559.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:00.100Z,1478845560.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:00.122Z,1478845560.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:00.489Z,1478845560.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:00.528Z,1478845560.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:00.889Z,1478845560.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:00.914Z,1478845560.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:01.289Z,1478845561.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:01.324Z,1478845561.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:01.688Z,1478845561.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:01.725Z,1478845561.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:02.101Z,1478845562.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:02.122Z,1478845562.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:02.489Z,1478845562.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:02.524Z,1478845562.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:02.892Z,1478845562.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:02.935Z,1478845562.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:03.289Z,1478845563.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:03.305Z,1478845563.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:03.692Z,1478845563.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:03.738Z,1478845563.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:04.089Z,1478845564.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:04.113Z,1478845564.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:04.495Z,1478845564.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:04.511Z,1478845564.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:04.896Z,1478845564.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:04.958Z,1478845564.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:05.298Z,1478845565.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:05.322Z,1478845565.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:05.689Z,1478845565.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:05.723Z,1478845565.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:06.089Z,1478845566.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:06.138Z,1478845566.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:06.493Z,1478845566.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:06.543Z,1478845566.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:06.890Z,1478845566.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:06.949Z,1478845566.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:07.289Z,1478845567.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:07.349Z,1478845567.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:07.689Z,1478845567.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:07.727Z,1478845567.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:08.101Z,1478845568.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:08.133Z,1478845568.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:08.473Z,1478845568.473 [NAL9602](INFO): NAL9602 initialized
2016-11-11T06:26:08.491Z,1478845568.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:08.524Z,1478845568.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:08.889Z,1478845568.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:08.930Z,1478845568.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:09.304Z,1478845569.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:09.337Z,1478845569.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:09.706Z,1478845569.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:09.740Z,1478845569.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:10.105Z,1478845570.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:10.137Z,1478845570.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:10.489Z,1478845570.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:10.529Z,1478845570.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:10.889Z,1478845570.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:10.931Z,1478845570.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:11.294Z,1478845571.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:11.312Z,1478845571.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:11.706Z,1478845571.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:11.743Z,1478845571.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:12.108Z,1478845572.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:12.138Z,1478845572.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:12.502Z,1478845572.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:12.511Z,1478845572.511 [PNI_TCM](ERROR): CRC does not match. Expected:0x55733 got:0x16913
2016-11-11T06:26:12.545Z,1478845572.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:12.899Z,1478845572.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:12.914Z,1478845572.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:13.294Z,1478845573.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:13.313Z,1478845573.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:13.700Z,1478845573.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:13.740Z,1478845573.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:14.093Z,1478845574.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:14.125Z,1478845574.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:14.506Z,1478845574.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:14.522Z,1478845574.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:14.901Z,1478845574.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:14.925Z,1478845574.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:15.298Z,1478845575.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:15.346Z,1478845575.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:15.699Z,1478845575.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:15.712Z,1478845575.712 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T06:26:15.746Z,1478845575.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:16.097Z,1478845576.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:16.124Z,1478845576.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:16.500Z,1478845576.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:16.520Z,1478845576.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:16.897Z,1478845576.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:16.926Z,1478845576.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:17.289Z,1478845577.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:17.322Z,1478845577.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:17.692Z,1478845577.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:17.729Z,1478845577.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:18.092Z,1478845578.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:18.153Z,1478845578.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:18.489Z,1478845578.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:18.529Z,1478845578.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:18.906Z,1478845578.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:18.938Z,1478845578.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:19.301Z,1478845579.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:19.337Z,1478845579.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:19.694Z,1478845579.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:19.745Z,1478845579.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:20.096Z,1478845580.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:20.142Z,1478845580.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:20.497Z,1478845580.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:20.504Z,1478845580.504 [PNI_TCM](ERROR): CRC does not match. Expected:0x54099 got:0x17927
2016-11-11T06:26:20.557Z,1478845580.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:20.898Z,1478845580.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:20.914Z,1478845580.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:21.299Z,1478845581.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:21.348Z,1478845581.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:21.692Z,1478845581.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:21.746Z,1478845581.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:22.099Z,1478845582.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:22.115Z,1478845582.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:22.500Z,1478845582.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:22.521Z,1478845582.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:22.897Z,1478845582.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:22.925Z,1478845582.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:23.289Z,1478845583.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:23.318Z,1478845583.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:23.692Z,1478845583.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:23.725Z,1478845583.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:24.092Z,1478845584.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:24.118Z,1478845584.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:24.489Z,1478845584.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:24.521Z,1478845584.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:24.890Z,1478845584.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:24.919Z,1478845584.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:25.291Z,1478845585.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:25.325Z,1478845585.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:25.691Z,1478845585.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:25.725Z,1478845585.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:26.090Z,1478845586.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:26.122Z,1478845586.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:26.490Z,1478845586.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:26.518Z,1478845586.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:26.892Z,1478845586.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:26.919Z,1478845586.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:27.291Z,1478845587.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:27.329Z,1478845587.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:27.704Z,1478845587.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:27.737Z,1478845587.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:28.102Z,1478845588.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:28.137Z,1478845588.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:28.492Z,1478845588.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:28.530Z,1478845588.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:28.893Z,1478845588.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:28.929Z,1478845588.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:29.289Z,1478845589.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:29.329Z,1478845589.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:29.692Z,1478845589.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:29.737Z,1478845589.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:30.092Z,1478845590.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:30.108Z,1478845590.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:30.493Z,1478845590.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:30.513Z,1478845590.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:30.893Z,1478845590.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:30.913Z,1478845590.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:31.299Z,1478845591.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:31.315Z,1478845591.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:31.696Z,1478845591.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:31.725Z,1478845591.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:32.098Z,1478845592.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:32.117Z,1478845592.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:32.493Z,1478845592.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:32.561Z,1478845592.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:32.891Z,1478845592.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:32.927Z,1478845592.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:33.313Z,1478845593.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:33.333Z,1478845593.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:33.700Z,1478845593.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:33.761Z,1478845593.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:34.089Z,1478845594.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:34.109Z,1478845594.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:34.496Z,1478845594.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:34.512Z,1478845594.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:34.894Z,1478845594.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:34.943Z,1478845594.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:35.295Z,1478845595.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:35.310Z,1478845595.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:35.693Z,1478845595.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:35.748Z,1478845595.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:36.096Z,1478845596.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:36.145Z,1478845596.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:36.496Z,1478845596.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:36.512Z,1478845596.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:36.901Z,1478845596.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:36.916Z,1478845596.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:37.304Z,1478845597.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:37.319Z,1478845597.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:37.706Z,1478845597.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:37.721Z,1478845597.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:38.096Z,1478845598.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:38.125Z,1478845598.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:38.489Z,1478845598.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:38.521Z,1478845598.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:38.889Z,1478845598.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:38.929Z,1478845598.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:39.298Z,1478845599.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:39.324Z,1478845599.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:39.689Z,1478845599.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:39.725Z,1478845599.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:40.089Z,1478845600.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:40.125Z,1478845600.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:40.494Z,1478845600.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:40.521Z,1478845600.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:40.891Z,1478845600.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:40.906Z,1478845600.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:41.289Z,1478845601.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:41.309Z,1478845601.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:41.704Z,1478845601.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:41.738Z,1478845601.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:42.100Z,1478845602.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:42.127Z,1478845602.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:42.501Z,1478845602.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:42.516Z,1478845602.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:42.897Z,1478845602.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:42.917Z,1478845602.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:43.292Z,1478845603.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:43.325Z,1478845603.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:43.693Z,1478845603.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:43.717Z,1478845603.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:44.089Z,1478845604.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:44.116Z,1478845604.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:44.489Z,1478845604.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:44.521Z,1478845604.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:44.908Z,1478845604.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:44.923Z,1478845604.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:45.315Z,1478845605.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:45.331Z,1478845605.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:45.689Z,1478845605.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:45.721Z,1478845605.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:46.097Z,1478845606.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:46.133Z,1478845606.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:46.494Z,1478845606.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:46.553Z,1478845606.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:46.889Z,1478845606.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:46.933Z,1478845606.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:47.289Z,1478845607.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:47.305Z,1478845607.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:47.694Z,1478845607.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:47.709Z,1478845607.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:48.094Z,1478845608.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:48.110Z,1478845608.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:48.496Z,1478845608.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:48.557Z,1478845608.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:48.898Z,1478845608.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:48.921Z,1478845608.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:52.131Z,1478845612.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:52.200Z,1478845612.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:52.297Z,1478845612.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:52.322Z,1478845612.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:52.660Z,1478845612.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:52.716Z,1478845612.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:53.052Z,1478845613.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:53.112Z,1478845613.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:53.470Z,1478845613.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:53.486Z,1478845613.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:53.874Z,1478845613.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:53.889Z,1478845613.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:54.249Z,1478845614.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:54.281Z,1478845614.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:54.649Z,1478845614.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:54.681Z,1478845614.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:55.050Z,1478845615.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:55.085Z,1478845615.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:55.449Z,1478845615.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:55.485Z,1478845615.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:55.855Z,1478845615.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:55.870Z,1478845615.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:56.254Z,1478845616.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:56.269Z,1478845616.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:56.650Z,1478845616.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:56.674Z,1478845616.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:57.056Z,1478845617.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:57.072Z,1478845617.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:57.458Z,1478845617.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:57.482Z,1478845617.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:57.853Z,1478845617.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:57.914Z,1478845617.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:58.249Z,1478845618.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:58.281Z,1478845618.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:58.657Z,1478845618.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:58.680Z,1478845618.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:59.064Z,1478845619.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:59.101Z,1478845619.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:59.460Z,1478845619.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:59.493Z,1478845619.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:26:59.854Z,1478845619.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:26:59.869Z,1478845619.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:00.253Z,1478845620.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:00.269Z,1478845620.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:00.656Z,1478845620.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:00.672Z,1478845620.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:01.052Z,1478845621.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:01.086Z,1478845621.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:01.449Z,1478845621.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:01.481Z,1478845621.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:01.849Z,1478845621.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:01.881Z,1478845621.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:02.272Z,1478845622.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:02.292Z,1478845622.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:02.649Z,1478845622.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:02.682Z,1478845622.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:03.049Z,1478845623.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:03.075Z,1478845623.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:03.479Z,1478845623.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:03.502Z,1478845623.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:03.860Z,1478845623.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:03.913Z,1478845623.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:04.250Z,1478845624.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:04.276Z,1478845624.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:04.654Z,1478845624.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:04.669Z,1478845624.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:05.054Z,1478845625.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:05.070Z,1478845625.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:05.456Z,1478845625.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:05.472Z,1478845625.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:05.857Z,1478845625.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:05.873Z,1478845625.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:06.252Z,1478845626.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:06.285Z,1478845626.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:06.656Z,1478845626.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:06.672Z,1478845626.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:07.064Z,1478845627.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:07.093Z,1478845627.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:07.449Z,1478845627.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:07.481Z,1478845627.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:07.872Z,1478845627.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:07.887Z,1478845627.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:08.275Z,1478845628.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:08.284Z,1478845628.284 [BPC1](ERROR): Failed to receive battery data
2016-11-11T06:27:08.284Z,1478845628.284 [BPC1] Communications Fault, FailCount= 1
2016-11-11T06:27:08.284Z,1478845628.284 [BPC1](ERROR): Communications Fault
2016-11-11T06:27:08.292Z,1478845628.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:08.345Z,1478845628.345 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T06:27:08.670Z,1478845628.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:08.690Z,1478845628.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:09.060Z,1478845629.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:09.093Z,1478845629.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:09.454Z,1478845629.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:09.489Z,1478845629.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:09.535Z,1478845629.536 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:27:09.536Z,1478845629.536 [BPC1] No Fault, FailCount= 1
2016-11-11T06:27:09.849Z,1478845629.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:09.935Z,1478845629.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:10.249Z,1478845630.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:10.294Z,1478845630.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:10.650Z,1478845630.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:10.689Z,1478845630.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:11.050Z,1478845631.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:11.089Z,1478845631.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:11.454Z,1478845631.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:11.469Z,1478845631.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:11.855Z,1478845631.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:11.881Z,1478845631.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:12.249Z,1478845632.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:12.285Z,1478845632.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:12.649Z,1478845632.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:12.681Z,1478845632.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:13.068Z,1478845633.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:13.100Z,1478845633.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:13.460Z,1478845633.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:13.497Z,1478845633.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:13.851Z,1478845633.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:13.867Z,1478845633.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:14.249Z,1478845634.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:14.269Z,1478845634.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:14.654Z,1478845634.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:14.678Z,1478845634.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:15.056Z,1478845635.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:15.072Z,1478845635.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:15.457Z,1478845635.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:15.477Z,1478845635.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:15.852Z,1478845635.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:15.884Z,1478845635.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:16.271Z,1478845636.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:16.287Z,1478845636.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:16.672Z,1478845636.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:16.689Z,1478845636.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:17.072Z,1478845637.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:17.092Z,1478845637.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:17.472Z,1478845637.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:17.488Z,1478845637.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:17.849Z,1478845637.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:17.893Z,1478845637.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:18.249Z,1478845638.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:18.289Z,1478845638.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:18.649Z,1478845638.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:18.665Z,1478845638.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:19.054Z,1478845639.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:19.069Z,1478845639.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:19.452Z,1478845639.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:19.467Z,1478845639.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:19.857Z,1478845639.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:19.872Z,1478845639.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:20.265Z,1478845640.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:20.285Z,1478845640.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:20.653Z,1478845640.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:20.709Z,1478845640.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:21.070Z,1478845641.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:21.086Z,1478845641.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:21.471Z,1478845641.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:21.493Z,1478845641.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:21.876Z,1478845641.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:21.931Z,1478845641.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:22.264Z,1478845642.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:22.287Z,1478845642.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:22.650Z,1478845642.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:22.694Z,1478845642.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:23.049Z,1478845643.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:23.076Z,1478845643.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:23.449Z,1478845643.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:23.497Z,1478845643.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:23.852Z,1478845643.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:23.891Z,1478845643.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:24.249Z,1478845644.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:24.289Z,1478845644.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:24.650Z,1478845644.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:24.673Z,1478845644.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:25.058Z,1478845645.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:25.077Z,1478845645.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:25.457Z,1478845645.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:25.472Z,1478845645.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:25.856Z,1478845645.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:25.872Z,1478845645.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:26.271Z,1478845646.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:26.293Z,1478845646.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:26.667Z,1478845646.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:26.682Z,1478845646.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:27.071Z,1478845647.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:27.086Z,1478845647.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:27.471Z,1478845647.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:27.493Z,1478845647.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:27.849Z,1478845647.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:27.881Z,1478845647.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:28.249Z,1478845648.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:28.285Z,1478845648.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:28.649Z,1478845648.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:28.693Z,1478845648.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:29.049Z,1478845649.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:29.089Z,1478845649.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:29.449Z,1478845649.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:29.469Z,1478845649.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:29.849Z,1478845649.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:29.864Z,1478845649.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:30.257Z,1478845650.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:30.272Z,1478845650.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:30.657Z,1478845650.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:30.672Z,1478845650.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:31.060Z,1478845651.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:31.075Z,1478845651.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:31.472Z,1478845651.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:31.487Z,1478845651.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:31.867Z,1478845651.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:31.882Z,1478845651.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:32.275Z,1478845652.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:32.289Z,1478845652.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:32.671Z,1478845652.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:32.687Z,1478845652.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:33.049Z,1478845653.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:33.085Z,1478845653.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:33.449Z,1478845653.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:33.493Z,1478845653.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:33.856Z,1478845653.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:33.891Z,1478845653.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:34.253Z,1478845654.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:34.339Z,1478845654.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:34.653Z,1478845654.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:34.668Z,1478845654.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:35.053Z,1478845655.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:35.104Z,1478845655.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:35.452Z,1478845655.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:35.468Z,1478845655.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:35.857Z,1478845655.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:35.904Z,1478845655.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:36.272Z,1478845656.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:36.317Z,1478845656.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:36.661Z,1478845656.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:36.681Z,1478845656.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:37.057Z,1478845657.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:37.072Z,1478845657.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:37.458Z,1478845657.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:37.477Z,1478845657.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:37.870Z,1478845657.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:37.885Z,1478845657.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:38.271Z,1478845658.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:38.286Z,1478845658.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:38.653Z,1478845658.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:38.689Z,1478845658.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:39.049Z,1478845659.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:39.081Z,1478845659.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:39.449Z,1478845659.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:39.485Z,1478845659.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:39.853Z,1478845659.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:39.885Z,1478845659.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:40.249Z,1478845660.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:40.285Z,1478845660.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:40.650Z,1478845660.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:40.685Z,1478845660.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:41.054Z,1478845661.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:41.085Z,1478845661.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:41.449Z,1478845661.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:41.485Z,1478845661.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:41.849Z,1478845661.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:41.885Z,1478845661.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:42.253Z,1478845662.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:42.285Z,1478845662.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:42.649Z,1478845662.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:42.685Z,1478845662.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:43.049Z,1478845663.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:43.085Z,1478845663.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:43.453Z,1478845663.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:43.481Z,1478845663.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:43.857Z,1478845663.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:43.885Z,1478845663.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:44.256Z,1478845664.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:44.279Z,1478845664.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:44.665Z,1478845664.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:44.685Z,1478845664.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:45.049Z,1478845665.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:45.081Z,1478845665.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:45.449Z,1478845665.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:45.489Z,1478845665.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:45.849Z,1478845665.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:45.881Z,1478845665.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:46.249Z,1478845666.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:46.281Z,1478845666.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:46.680Z,1478845666.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:46.688Z,1478845666.688 [BPC1](ERROR): Failed to parse message.
2016-11-11T06:27:46.689Z,1478845666.689 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T06:27:46.689Z,1478845666.689 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:27:46.689Z,1478845666.689 [BPC1](ERROR): Data Fault
2016-11-11T06:27:46.697Z,1478845666.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:46.753Z,1478845666.753 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:27:47.060Z,1478845667.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:47.095Z,1478845667.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:47.449Z,1478845667.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:47.489Z,1478845667.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:47.857Z,1478845667.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:47.872Z,1478845667.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:47.916Z,1478845667.916 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:27:47.916Z,1478845667.916 [BPC1] No Fault, FailCount= 1
2016-11-11T06:27:48.257Z,1478845668.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:48.337Z,1478845668.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:48.653Z,1478845668.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:48.701Z,1478845668.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:49.049Z,1478845669.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:49.090Z,1478845669.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:52.400Z,1478845672.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:52.421Z,1478845672.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:52.528Z,1478845672.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:52.561Z,1478845672.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:52.914Z,1478845672.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:52.944Z,1478845672.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:53.313Z,1478845673.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:53.336Z,1478845673.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:53.716Z,1478845673.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:53.732Z,1478845673.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:54.109Z,1478845674.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:54.141Z,1478845674.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:54.509Z,1478845674.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:54.541Z,1478845674.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:54.931Z,1478845674.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:54.947Z,1478845674.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:55.335Z,1478845675.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:55.350Z,1478845675.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:55.709Z,1478845675.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:55.741Z,1478845675.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:56.109Z,1478845676.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:56.145Z,1478845676.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:56.510Z,1478845676.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:56.537Z,1478845676.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:56.909Z,1478845676.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:56.949Z,1478845676.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:57.310Z,1478845677.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:57.325Z,1478845677.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:57.714Z,1478845677.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:57.737Z,1478845677.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:58.112Z,1478845678.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:58.144Z,1478845678.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:58.521Z,1478845678.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:58.536Z,1478845678.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:58.909Z,1478845678.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:58.974Z,1478845678.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:59.335Z,1478845679.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:59.350Z,1478845679.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:27:59.727Z,1478845679.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:27:59.785Z,1478845679.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:00.110Z,1478845680.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:00.145Z,1478845680.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:00.509Z,1478845680.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:00.557Z,1478845680.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:00.909Z,1478845680.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:00.940Z,1478845680.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:01.309Z,1478845681.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:01.361Z,1478845681.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:01.710Z,1478845681.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:01.761Z,1478845681.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:02.109Z,1478845682.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:02.149Z,1478845682.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:02.510Z,1478845682.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:02.529Z,1478845682.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:02.910Z,1478845682.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:02.929Z,1478845682.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:03.313Z,1478845683.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:03.328Z,1478845683.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:03.714Z,1478845683.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:03.749Z,1478845683.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:04.113Z,1478845684.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:04.133Z,1478845684.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:04.515Z,1478845684.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:04.530Z,1478845684.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:04.916Z,1478845684.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:04.931Z,1478845684.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:05.319Z,1478845685.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:05.335Z,1478845685.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:05.718Z,1478845685.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:05.738Z,1478845685.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:06.110Z,1478845686.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:06.162Z,1478845686.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:06.511Z,1478845686.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:06.551Z,1478845686.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:06.918Z,1478845686.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:06.937Z,1478845686.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:07.311Z,1478845687.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:07.353Z,1478845687.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:07.720Z,1478845687.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:07.769Z,1478845687.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:08.130Z,1478845688.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:08.146Z,1478845688.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:08.521Z,1478845688.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:08.553Z,1478845688.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:08.911Z,1478845688.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:08.955Z,1478845688.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:09.319Z,1478845689.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:09.366Z,1478845689.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:09.720Z,1478845689.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:09.743Z,1478845689.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:10.112Z,1478845690.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:10.160Z,1478845690.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:10.511Z,1478845690.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:10.526Z,1478845690.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:10.915Z,1478845690.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:10.967Z,1478845690.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:11.319Z,1478845691.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:11.338Z,1478845691.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:11.710Z,1478845691.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:11.744Z,1478845691.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:12.114Z,1478845692.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:12.142Z,1478845692.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:12.510Z,1478845692.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:12.601Z,1478845692.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:12.919Z,1478845692.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:12.968Z,1478845692.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:13.317Z,1478845693.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:13.369Z,1478845693.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:13.730Z,1478845693.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:13.746Z,1478845693.746 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:13.746Z,1478845693.746 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2016-11-11T06:28:13.746Z,1478845693.746 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:28:13.773Z,1478845693.773 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:13.773Z,1478845693.773 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2016-11-11T06:28:13.773Z,1478845693.773 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:28:13.804Z,1478845693.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:28:13.805Z,1478845693.805 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:28:14.109Z,1478845694.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:14.211Z,1478845694.211 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:28:14.211Z,1478845694.211 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2016-11-11T06:28:14.212Z,1478845694.212 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:28:14.212Z,1478845694.212 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2016-11-11T06:28:14.513Z,1478845694.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:14.561Z,1478845694.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:28:14.562Z,1478845694.562 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:28:14.562Z,1478845694.562 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:28:14.567Z,1478845694.566 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:28:14.567Z,1478845694.567 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:28:14.567Z,1478845694.567 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:28:14.913Z,1478845694.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:14.964Z,1478845694.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:28:14.965Z,1478845694.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:15.338Z,1478845695.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:15.353Z,1478845695.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:28:15.354Z,1478845695.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:15.711Z,1478845695.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:15.740Z,1478845695.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:28:15.742Z,1478845695.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:16.110Z,1478845696.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:16.140Z,1478845696.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T06:28:16.142Z,1478845696.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:16.534Z,1478845696.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:16.566Z,1478845696.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T06:28:16.567Z,1478845696.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:16.924Z,1478845696.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:16.965Z,1478845696.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T06:28:16.966Z,1478845696.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:17.316Z,1478845697.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:17.375Z,1478845697.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T06:28:17.376Z,1478845697.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:17.721Z,1478845697.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:17.770Z,1478845697.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T06:28:17.775Z,1478845697.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:18.119Z,1478845698.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:18.140Z,1478845698.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T06:28:18.141Z,1478845698.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:18.180Z,1478845698.180 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:18.180Z,1478845698.180 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 14
2016-11-11T06:28:18.180Z,1478845698.180 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:28:18.194Z,1478845698.194 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:28:18.519Z,1478845698.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:18.539Z,1478845698.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T06:28:18.544Z,1478845698.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:18.616Z,1478845698.616 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:28:18.616Z,1478845698.616 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 14
2016-11-11T06:28:18.919Z,1478845698.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:18.981Z,1478845698.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T06:28:18.982Z,1478845698.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:19.005Z,1478845699.005 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:28:19.005Z,1478845699.005 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:28:19.006Z,1478845699.006 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:28:19.311Z,1478845699.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:19.357Z,1478845699.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T06:28:19.358Z,1478845699.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:19.711Z,1478845699.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:19.769Z,1478845699.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T06:28:19.770Z,1478845699.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:20.111Z,1478845700.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:20.130Z,1478845700.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T06:28:20.136Z,1478845700.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:20.519Z,1478845700.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:20.580Z,1478845700.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T06:28:20.581Z,1478845700.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:20.933Z,1478845700.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:20.985Z,1478845700.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T06:28:20.986Z,1478845700.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:21.329Z,1478845701.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:21.353Z,1478845701.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T06:28:21.354Z,1478845701.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:21.712Z,1478845701.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:21.757Z,1478845701.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T06:28:21.759Z,1478845701.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:22.111Z,1478845702.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:22.131Z,1478845702.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T06:28:22.157Z,1478845702.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:22.519Z,1478845702.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:22.539Z,1478845702.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T06:28:22.560Z,1478845702.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:22.920Z,1478845702.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:22.962Z,1478845702.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T06:28:22.965Z,1478845702.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:23.316Z,1478845703.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:23.353Z,1478845703.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T06:28:23.354Z,1478845703.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:23.711Z,1478845703.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:23.761Z,1478845703.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T06:28:23.762Z,1478845703.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:24.110Z,1478845704.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:24.157Z,1478845704.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T06:28:24.158Z,1478845704.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:24.510Z,1478845704.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:24.541Z,1478845704.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T06:28:24.542Z,1478845704.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:24.910Z,1478845704.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:24.941Z,1478845704.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T06:28:24.942Z,1478845704.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:25.333Z,1478845705.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:25.401Z,1478845705.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2016-11-11T06:28:25.402Z,1478845705.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:25.720Z,1478845705.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:25.746Z,1478845705.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T06:28:25.747Z,1478845705.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:26.124Z,1478845706.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:26.161Z,1478845706.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T06:28:26.162Z,1478845706.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:26.524Z,1478845706.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:26.557Z,1478845706.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T06:28:26.558Z,1478845706.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:26.909Z,1478845706.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:26.929Z,1478845706.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T06:28:26.930Z,1478845706.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:27.314Z,1478845707.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:27.333Z,1478845707.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T06:28:27.334Z,1478845707.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:27.713Z,1478845707.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:27.732Z,1478845707.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T06:28:27.733Z,1478845707.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:28.116Z,1478845708.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:28.131Z,1478845708.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T06:28:28.132Z,1478845708.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:28.516Z,1478845708.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:28.531Z,1478845708.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T06:28:28.532Z,1478845708.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:28.918Z,1478845708.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:28.937Z,1478845708.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T06:28:28.938Z,1478845708.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:29.312Z,1478845709.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:29.343Z,1478845709.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T06:28:29.344Z,1478845709.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:29.709Z,1478845709.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:29.728Z,1478845709.727 [BPC1](ERROR): Failed to receive battery data
2016-11-11T06:28:29.728Z,1478845709.728 [BPC1] Communications Fault, FailCount= 1
2016-11-11T06:28:29.728Z,1478845709.728 [BPC1](ERROR): Communications Fault
2016-11-11T06:28:29.757Z,1478845709.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T06:28:29.758Z,1478845709.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:29.799Z,1478845709.799 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T06:28:30.109Z,1478845710.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:30.141Z,1478845710.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T06:28:30.142Z,1478845710.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:30.563Z,1478845710.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:30.588Z,1478845710.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T06:28:30.589Z,1478845710.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:30.928Z,1478845710.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:30.943Z,1478845710.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T06:28:30.944Z,1478845710.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:30.964Z,1478845710.964 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:28:30.964Z,1478845710.964 [BPC1] No Fault, FailCount= 1
2016-11-11T06:28:31.323Z,1478845711.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:31.421Z,1478845711.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2016-11-11T06:28:31.422Z,1478845711.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:31.720Z,1478845711.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:31.745Z,1478845711.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T06:28:31.746Z,1478845711.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:32.109Z,1478845712.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:32.161Z,1478845712.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T06:28:32.162Z,1478845712.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:32.513Z,1478845712.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:32.528Z,1478845712.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T06:28:32.529Z,1478845712.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:32.909Z,1478845712.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:32.929Z,1478845712.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T06:28:32.930Z,1478845712.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:33.314Z,1478845713.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:33.329Z,1478845713.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T06:28:33.330Z,1478845713.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:33.713Z,1478845713.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:33.728Z,1478845713.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2016-11-11T06:28:33.729Z,1478845713.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:34.116Z,1478845714.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:34.131Z,1478845714.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:34.515Z,1478845714.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:34.530Z,1478845714.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:34.917Z,1478845714.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:34.932Z,1478845714.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:35.312Z,1478845715.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:35.340Z,1478845715.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:35.729Z,1478845715.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:35.744Z,1478845715.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:36.131Z,1478845716.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:36.153Z,1478845716.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:36.556Z,1478845716.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:36.584Z,1478845716.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:36.927Z,1478845716.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:36.942Z,1478845716.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:37.309Z,1478845717.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:37.344Z,1478845717.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:37.709Z,1478845717.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:37.734Z,1478845717.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:38.120Z,1478845718.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:38.135Z,1478845718.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:38.509Z,1478845718.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:38.544Z,1478845718.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:38.909Z,1478845718.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:38.935Z,1478845718.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:39.310Z,1478845719.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:39.336Z,1478845719.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:39.710Z,1478845719.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:39.742Z,1478845719.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:40.109Z,1478845720.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:40.147Z,1478845720.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:40.513Z,1478845720.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:40.539Z,1478845720.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:40.936Z,1478845720.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:40.952Z,1478845720.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:41.327Z,1478845721.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:41.343Z,1478845721.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:41.714Z,1478845721.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:41.739Z,1478845721.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:42.109Z,1478845722.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:42.146Z,1478845722.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:42.509Z,1478845722.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:42.565Z,1478845722.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:42.913Z,1478845722.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:42.945Z,1478845722.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:43.317Z,1478845723.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:43.352Z,1478845723.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:43.714Z,1478845723.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:43.742Z,1478845723.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:44.124Z,1478845724.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:44.155Z,1478845724.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:44.524Z,1478845724.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:44.585Z,1478845724.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:44.912Z,1478845724.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:44.945Z,1478845724.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:45.316Z,1478845725.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:45.373Z,1478845725.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:45.718Z,1478845725.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:45.732Z,1478845725.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:46.112Z,1478845726.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:46.189Z,1478845726.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:46.512Z,1478845726.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:46.567Z,1478845726.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:46.917Z,1478845726.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:46.937Z,1478845726.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:47.309Z,1478845727.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:47.341Z,1478845727.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:47.709Z,1478845727.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:47.741Z,1478845727.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:48.110Z,1478845728.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:48.149Z,1478845728.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:48.509Z,1478845728.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:48.537Z,1478845728.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:48.909Z,1478845728.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:48.945Z,1478845728.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:49.314Z,1478845729.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:49.329Z,1478845729.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:52.589Z,1478845732.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:52.613Z,1478845732.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:52.742Z,1478845732.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:52.764Z,1478845732.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:53.080Z,1478845733.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:53.107Z,1478845733.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:53.474Z,1478845733.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:53.493Z,1478845733.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:53.868Z,1478845733.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:53.901Z,1478845733.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:54.265Z,1478845734.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:54.301Z,1478845734.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:54.670Z,1478845734.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:54.705Z,1478845734.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:55.082Z,1478845735.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:55.098Z,1478845735.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:55.469Z,1478845735.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:55.501Z,1478845735.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:55.865Z,1478845735.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:55.892Z,1478845735.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:56.273Z,1478845736.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:56.309Z,1478845736.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:56.672Z,1478845736.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:56.701Z,1478845736.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:57.088Z,1478845737.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:57.143Z,1478845737.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:57.483Z,1478845737.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:57.498Z,1478845737.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:57.877Z,1478845737.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:57.893Z,1478845737.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:58.268Z,1478845738.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:58.297Z,1478845738.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:58.670Z,1478845738.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:58.698Z,1478845738.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:59.065Z,1478845739.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:59.139Z,1478845739.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:59.465Z,1478845739.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:59.480Z,1478845739.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:59.870Z,1478845739.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:28:59.909Z,1478845739.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:28:59.954Z,1478845739.954 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T06:28:59.954Z,1478845739.954 [Rowe_600LCM] No Fault, FailCount= 5
2016-11-11T06:29:00.075Z,1478845740.075 [Rowe_600LCM](INFO): Initializing
2016-11-11T06:29:00.076Z,1478845740.076 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T06:29:00.076Z,1478845740.076 [Rowe_600LCM](INFO): LCM OK
2016-11-11T06:29:00.076Z,1478845740.076 [Rowe_600LCM](INFO): Powering up
2016-11-11T06:29:00.269Z,1478845740.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:00.313Z,1478845740.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:00.665Z,1478845740.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:00.685Z,1478845740.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:01.065Z,1478845741.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:01.117Z,1478845741.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:01.484Z,1478845741.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:01.512Z,1478845741.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:01.879Z,1478845741.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:01.922Z,1478845741.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:02.269Z,1478845742.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:02.289Z,1478845742.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:02.677Z,1478845742.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:02.697Z,1478845742.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:03.072Z,1478845743.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:03.089Z,1478845743.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:03.475Z,1478845743.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:03.491Z,1478845743.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:03.876Z,1478845743.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:03.891Z,1478845743.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:04.203Z,1478845744.203 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T06:29:04.279Z,1478845744.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:04.319Z,1478845744.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:04.367Z,1478845744.367 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T06:29:04.368Z,1478845744.368 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T06:29:04.370Z,1478845744.369 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T06:29:04.371Z,1478845744.371 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T06:29:04.685Z,1478845744.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:04.710Z,1478845744.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:05.076Z,1478845745.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:05.134Z,1478845745.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:05.465Z,1478845745.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:05.500Z,1478845745.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:05.881Z,1478845745.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:05.901Z,1478845745.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:06.265Z,1478845746.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:06.301Z,1478845746.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:06.665Z,1478845746.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:06.708Z,1478845746.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:07.065Z,1478845747.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:07.105Z,1478845747.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:07.477Z,1478845747.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:07.507Z,1478845747.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:07.866Z,1478845747.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:07.897Z,1478845747.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:08.268Z,1478845748.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:08.301Z,1478845748.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:08.673Z,1478845748.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:08.693Z,1478845748.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:09.072Z,1478845749.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:09.101Z,1478845749.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:09.465Z,1478845749.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:09.497Z,1478845749.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:09.865Z,1478845749.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:09.905Z,1478845749.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:10.288Z,1478845750.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:10.340Z,1478845750.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:10.676Z,1478845750.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:10.692Z,1478845750.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:11.069Z,1478845751.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:11.097Z,1478845751.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:11.481Z,1478845751.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:11.502Z,1478845751.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:11.868Z,1478845751.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:11.893Z,1478845751.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:12.265Z,1478845752.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:12.292Z,1478845752.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:12.665Z,1478845752.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:12.718Z,1478845752.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:13.070Z,1478845753.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:13.101Z,1478845753.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:13.465Z,1478845753.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:13.494Z,1478845753.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:13.865Z,1478845753.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:13.921Z,1478845753.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:14.280Z,1478845754.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:14.317Z,1478845754.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:14.684Z,1478845754.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:14.717Z,1478845754.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:15.077Z,1478845755.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:15.121Z,1478845755.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:15.469Z,1478845755.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:15.505Z,1478845755.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:15.869Z,1478845755.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:15.921Z,1478845755.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:16.273Z,1478845756.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:16.322Z,1478845756.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:16.672Z,1478845756.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:16.688Z,1478845756.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:17.068Z,1478845757.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:17.093Z,1478845757.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:17.473Z,1478845757.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:17.493Z,1478845757.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:17.868Z,1478845757.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:17.896Z,1478845757.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:18.276Z,1478845758.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:18.292Z,1478845758.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:18.665Z,1478845758.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:18.696Z,1478845758.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:19.077Z,1478845759.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:19.098Z,1478845759.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:19.469Z,1478845759.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:19.495Z,1478845759.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:19.865Z,1478845759.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:19.897Z,1478845759.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:20.265Z,1478845760.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:20.298Z,1478845760.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:20.669Z,1478845760.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:20.694Z,1478845760.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:21.074Z,1478845761.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:21.109Z,1478845761.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:21.465Z,1478845761.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:21.493Z,1478845761.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:21.865Z,1478845761.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:21.905Z,1478845761.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:22.269Z,1478845762.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:22.283Z,1478845762.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:22.665Z,1478845762.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:22.701Z,1478845762.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:23.094Z,1478845763.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:23.113Z,1478845763.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:23.484Z,1478845763.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:23.513Z,1478845763.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:23.870Z,1478845763.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:23.898Z,1478845763.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:24.269Z,1478845764.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:24.289Z,1478845764.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:24.672Z,1478845764.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:24.693Z,1478845764.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:25.073Z,1478845765.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:25.093Z,1478845765.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:25.473Z,1478845765.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:25.493Z,1478845765.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:25.869Z,1478845765.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:25.893Z,1478845765.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:26.268Z,1478845766.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:26.300Z,1478845766.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:26.681Z,1478845766.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:26.701Z,1478845766.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:27.065Z,1478845767.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:27.142Z,1478845767.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:27.484Z,1478845767.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:27.510Z,1478845767.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:27.884Z,1478845767.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:27.921Z,1478845767.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:28.269Z,1478845768.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:28.331Z,1478845768.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:28.669Z,1478845768.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:28.693Z,1478845768.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:29.075Z,1478845769.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:29.091Z,1478845769.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:29.474Z,1478845769.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:29.525Z,1478845769.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:29.865Z,1478845769.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:29.897Z,1478845769.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:30.273Z,1478845770.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:30.331Z,1478845770.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:30.665Z,1478845770.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:30.724Z,1478845770.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:31.065Z,1478845771.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:31.097Z,1478845771.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:31.473Z,1478845771.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:31.495Z,1478845771.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:31.887Z,1478845771.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:31.902Z,1478845771.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:32.280Z,1478845772.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:32.311Z,1478845772.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:32.673Z,1478845772.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:32.699Z,1478845772.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:33.065Z,1478845773.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:33.105Z,1478845773.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:33.465Z,1478845773.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:33.485Z,1478845773.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:33.869Z,1478845773.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:33.889Z,1478845773.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:34.274Z,1478845774.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:34.289Z,1478845774.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:34.668Z,1478845774.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:34.696Z,1478845774.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:35.080Z,1478845775.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:35.096Z,1478845775.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:35.478Z,1478845775.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:35.493Z,1478845775.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:35.884Z,1478845775.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:35.912Z,1478845775.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:36.280Z,1478845776.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:36.343Z,1478845776.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:36.665Z,1478845776.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:36.681Z,1478845776.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:37.065Z,1478845777.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:37.085Z,1478845777.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:37.468Z,1478845777.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:37.489Z,1478845777.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:37.873Z,1478845777.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:37.888Z,1478845777.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:38.268Z,1478845778.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:38.301Z,1478845778.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:38.680Z,1478845778.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:38.695Z,1478845778.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:39.082Z,1478845779.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:39.097Z,1478845779.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:39.465Z,1478845779.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:39.497Z,1478845779.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:39.884Z,1478845779.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:39.912Z,1478845779.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:40.289Z,1478845780.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:40.309Z,1478845780.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:40.688Z,1478845780.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:40.708Z,1478845780.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:41.091Z,1478845781.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:41.106Z,1478845781.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:41.465Z,1478845781.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:41.509Z,1478845781.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:41.865Z,1478845781.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:41.905Z,1478845781.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:42.269Z,1478845782.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:42.289Z,1478845782.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:42.672Z,1478845782.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:42.693Z,1478845782.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:43.080Z,1478845783.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:43.139Z,1478845783.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:43.476Z,1478845783.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:43.492Z,1478845783.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:43.865Z,1478845783.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:43.900Z,1478845783.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:44.265Z,1478845784.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:44.321Z,1478845784.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:44.695Z,1478845784.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:44.711Z,1478845784.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:45.096Z,1478845785.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:45.153Z,1478845785.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:45.480Z,1478845785.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:45.541Z,1478845785.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:45.880Z,1478845785.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:45.917Z,1478845785.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:46.273Z,1478845786.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:46.288Z,1478845786.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:46.674Z,1478845786.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:46.693Z,1478845786.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:47.077Z,1478845787.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:47.097Z,1478845787.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:47.478Z,1478845787.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:47.494Z,1478845787.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:47.502Z,1478845787.502 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T06:24:47.5Z
2016-11-11T06:29:47.502Z,1478845787.502 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T06:29:47.502Z,1478845787.502 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T06:29:47.868Z,1478845787.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:47.901Z,1478845787.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:48.703Z,1478845788.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:48.718Z,1478845788.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:48.858Z,1478845788.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:48.916Z,1478845788.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:52.194Z,1478845792.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:52.210Z,1478845792.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:52.260Z,1478845792.260 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0040.lzma
2016-11-11T06:29:52.321Z,1478845792.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:52.373Z,1478845792.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:52.684Z,1478845792.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:52.717Z,1478845792.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:53.050Z,1478845793.050 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0040.lzma.bak
2016-11-11T06:29:53.050Z,1478845793.050 [DataOverHttps](INFO): SBD MOMSN=4555101
2016-11-11T06:29:53.096Z,1478845793.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:53.130Z,1478845793.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:54.341Z,1478845794.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:54.366Z,1478845794.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:54.465Z,1478845794.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:54.517Z,1478845794.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:58.049Z,1478845798.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:58.149Z,1478845798.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:58.245Z,1478845798.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:58.269Z,1478845798.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:58.621Z,1478845798.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:58.653Z,1478845798.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:59.022Z,1478845799.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:59.096Z,1478845799.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:59.413Z,1478845799.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:59.449Z,1478845799.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:29:59.818Z,1478845799.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:29:59.858Z,1478845799.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:03.292Z,1478845803.292 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T06:30:03.311Z,1478845803.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:03.362Z,1478845803.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:03.404Z,1478845803.404 [DataOverHttps](INFO): Sending 252 bytes from file Logs/20161111T044527/Express0041.lzma
2016-11-11T06:30:03.467Z,1478845803.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:03.501Z,1478845803.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:03.834Z,1478845803.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:03.865Z,1478845803.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:23.915Z,1478845823.915 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0041.lzma.bak
2016-11-11T06:30:23.915Z,1478845823.915 [DataOverHttps](INFO): SBD MOMSN=4555103
2016-11-11T06:30:23.931Z,1478845823.931 [NAL9602](INFO): Powering down
2016-11-11T06:30:23.963Z,1478845823.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:23.991Z,1478845823.991 [BPC1](ERROR): Failed to receive battery data
2016-11-11T06:30:23.991Z,1478845823.991 [BPC1] Communications Fault, FailCount= 1
2016-11-11T06:30:23.991Z,1478845823.991 [BPC1](ERROR): Communications Fault
2016-11-11T06:30:24.009Z,1478845824.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:24.052Z,1478845824.052 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T06:30:25.417Z,1478845825.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:25.433Z,1478845825.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:25.442Z,1478845825.442 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T06:30:25.442Z,1478845825.442 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T06:30:25.442Z,1478845825.442 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T06:30:25.537Z,1478845825.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:25.581Z,1478845825.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:29.181Z,1478845829.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:29.196Z,1478845829.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:29.253Z,1478845829.253 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:30:29.253Z,1478845829.253 [BPC1] No Fault, FailCount= 1
2016-11-11T06:30:29.306Z,1478845829.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:29.397Z,1478845829.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:29.695Z,1478845829.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:29.710Z,1478845829.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:30.096Z,1478845830.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:30.145Z,1478845830.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:30.492Z,1478845830.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:30.507Z,1478845830.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:30.907Z,1478845830.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:30.922Z,1478845830.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:31.287Z,1478845831.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:31.325Z,1478845831.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:31.696Z,1478845831.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:31.711Z,1478845831.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:32.085Z,1478845832.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:32.117Z,1478845832.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:32.487Z,1478845832.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:32.516Z,1478845832.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:32.887Z,1478845832.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:32.929Z,1478845832.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:33.285Z,1478845833.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:33.317Z,1478845833.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:33.685Z,1478845833.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:33.718Z,1478845833.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:34.091Z,1478845834.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:34.119Z,1478845834.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:34.501Z,1478845834.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:34.517Z,1478845834.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:34.889Z,1478845834.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:34.922Z,1478845834.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:35.285Z,1478845835.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:35.320Z,1478845835.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:35.692Z,1478845835.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:35.719Z,1478845835.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:36.086Z,1478845836.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:36.113Z,1478845836.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:36.485Z,1478845836.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:36.525Z,1478845836.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:36.889Z,1478845836.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:36.925Z,1478845836.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:37.288Z,1478845837.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:37.309Z,1478845837.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:37.689Z,1478845837.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:37.705Z,1478845837.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:38.093Z,1478845838.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:38.108Z,1478845838.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:38.492Z,1478845838.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:38.507Z,1478845838.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:38.891Z,1478845838.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:38.922Z,1478845838.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:39.289Z,1478845839.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:39.325Z,1478845839.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:39.685Z,1478845839.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:39.716Z,1478845839.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:40.085Z,1478845840.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:40.116Z,1478845840.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:40.493Z,1478845840.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:40.519Z,1478845840.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:40.885Z,1478845840.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:40.912Z,1478845840.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:41.289Z,1478845841.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:41.316Z,1478845841.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:41.693Z,1478845841.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:41.749Z,1478845841.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:42.087Z,1478845842.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:42.149Z,1478845842.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:42.492Z,1478845842.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:42.508Z,1478845842.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:42.887Z,1478845842.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:42.920Z,1478845842.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:43.288Z,1478845843.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:43.325Z,1478845843.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:43.686Z,1478845843.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:43.721Z,1478845843.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:44.089Z,1478845844.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:44.151Z,1478845844.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:44.496Z,1478845844.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:44.556Z,1478845844.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:44.885Z,1478845844.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:44.911Z,1478845844.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:45.303Z,1478845845.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:45.323Z,1478845845.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:45.685Z,1478845845.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:45.719Z,1478845845.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:46.089Z,1478845846.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:46.116Z,1478845846.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:46.486Z,1478845846.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:46.521Z,1478845846.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:46.885Z,1478845846.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:46.912Z,1478845846.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:47.294Z,1478845847.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:47.325Z,1478845847.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:47.686Z,1478845847.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:47.705Z,1478845847.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:48.089Z,1478845848.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:48.109Z,1478845848.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:48.489Z,1478845848.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:48.505Z,1478845848.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:48.887Z,1478845848.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:48.919Z,1478845848.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:49.291Z,1478845849.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:49.313Z,1478845849.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:49.692Z,1478845849.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:49.708Z,1478845849.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:50.092Z,1478845850.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:50.114Z,1478845850.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:50.493Z,1478845850.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:50.508Z,1478845850.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:50.892Z,1478845850.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:50.914Z,1478845850.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:51.285Z,1478845851.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:51.318Z,1478845851.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:51.692Z,1478845851.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:51.715Z,1478845851.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:52.100Z,1478845852.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:52.116Z,1478845852.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:52.485Z,1478845852.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:52.518Z,1478845852.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:52.896Z,1478845852.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:52.920Z,1478845852.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:53.285Z,1478845853.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:53.317Z,1478845853.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:53.685Z,1478845853.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:53.717Z,1478845853.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:54.085Z,1478845854.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:54.117Z,1478845854.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:54.485Z,1478845854.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:54.517Z,1478845854.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:54.896Z,1478845854.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:54.919Z,1478845854.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:55.285Z,1478845855.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:55.317Z,1478845855.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:55.689Z,1478845855.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:55.725Z,1478845855.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:56.085Z,1478845856.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:56.120Z,1478845856.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:56.485Z,1478845856.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:56.570Z,1478845856.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:56.889Z,1478845856.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:56.941Z,1478845856.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:57.285Z,1478845857.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:57.317Z,1478845857.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:57.685Z,1478845857.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:57.720Z,1478845857.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:57.940Z,1478845857.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:58.089Z,1478845858.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:58.145Z,1478845858.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:58.489Z,1478845858.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:58.514Z,1478845858.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:58.736Z,1478845858.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:58.893Z,1478845858.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:58.945Z,1478845858.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:59.144Z,1478845859.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:59.285Z,1478845859.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:59.337Z,1478845859.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:59.685Z,1478845859.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:30:59.738Z,1478845859.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:30:59.940Z,1478845859.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:00.085Z,1478845860.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:00.128Z,1478845860.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:00.485Z,1478845860.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:00.500Z,1478845860.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:00.736Z,1478845860.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:00.914Z,1478845860.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:00.929Z,1478845860.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:01.144Z,1478845861.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:01.285Z,1478845861.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:01.305Z,1478845861.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:01.690Z,1478845861.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:01.706Z,1478845861.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:01.940Z,1478845861.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:02.088Z,1478845862.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:02.109Z,1478845862.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:02.490Z,1478845862.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:02.505Z,1478845862.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:02.736Z,1478845862.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:02.889Z,1478845862.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:02.909Z,1478845862.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:03.144Z,1478845863.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:03.308Z,1478845863.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:03.340Z,1478845863.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:03.688Z,1478845863.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:03.703Z,1478845863.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:03.940Z,1478845863.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:04.091Z,1478845864.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:04.107Z,1478845864.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:04.492Z,1478845864.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:04.507Z,1478845864.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:04.736Z,1478845864.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:04.897Z,1478845864.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:04.912Z,1478845864.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:05.144Z,1478845865.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:05.285Z,1478845865.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:05.309Z,1478845865.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:05.692Z,1478845865.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:05.707Z,1478845865.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:05.940Z,1478845865.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:06.092Z,1478845866.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:06.107Z,1478845866.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:06.492Z,1478845866.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:06.507Z,1478845866.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:06.736Z,1478845866.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:06.898Z,1478845866.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:06.929Z,1478845866.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:07.144Z,1478845867.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:07.285Z,1478845867.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:07.317Z,1478845867.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:07.685Z,1478845867.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:07.711Z,1478845867.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:07.940Z,1478845867.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:08.085Z,1478845868.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:08.119Z,1478845868.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:08.485Z,1478845868.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:08.517Z,1478845868.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:08.736Z,1478845868.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:08.901Z,1478845868.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:08.916Z,1478845868.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:09.144Z,1478845869.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:09.286Z,1478845869.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:09.370Z,1478845869.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:09.685Z,1478845869.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:09.717Z,1478845869.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:09.942Z,1478845869.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:10.085Z,1478845870.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:10.120Z,1478845870.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:10.485Z,1478845870.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:10.510Z,1478845870.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:10.737Z,1478845870.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:10.896Z,1478845870.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:10.917Z,1478845870.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:11.144Z,1478845871.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:11.285Z,1478845871.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:11.337Z,1478845871.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:11.685Z,1478845871.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:11.744Z,1478845871.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:11.940Z,1478845871.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:12.086Z,1478845872.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:12.101Z,1478845872.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:12.485Z,1478845872.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:12.505Z,1478845872.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:12.736Z,1478845872.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:12.897Z,1478845872.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:12.970Z,1478845872.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:13.144Z,1478845873.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:13.288Z,1478845873.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:13.309Z,1478845873.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:13.693Z,1478845873.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:13.746Z,1478845873.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:13.942Z,1478845873.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:14.085Z,1478845874.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:14.134Z,1478845874.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:14.485Z,1478845874.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:14.517Z,1478845874.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:14.736Z,1478845874.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:14.886Z,1478845874.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:14.961Z,1478845874.961 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:14.961Z,1478845874.961 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2016-11-11T06:31:14.961Z,1478845874.961 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:31:14.968Z,1478845874.968 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:14.968Z,1478845874.968 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2016-11-11T06:31:14.968Z,1478845874.968 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:31:14.984Z,1478845874.984 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:31:14.984Z,1478845874.984 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:31:15.146Z,1478845875.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:15.285Z,1478845875.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:15.334Z,1478845875.334 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:31:15.334Z,1478845875.334 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2016-11-11T06:31:15.334Z,1478845875.334 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:31:15.335Z,1478845875.335 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2016-11-11T06:31:15.689Z,1478845875.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:15.720Z,1478845875.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:31:15.720Z,1478845875.720 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:31:15.721Z,1478845875.721 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:31:15.725Z,1478845875.726 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:31:15.726Z,1478845875.726 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:31:15.726Z,1478845875.726 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:31:15.940Z,1478845875.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:16.085Z,1478845876.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:16.125Z,1478845876.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:16.490Z,1478845876.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:16.505Z,1478845876.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:16.732Z,1478845876.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:16.897Z,1478845876.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:16.912Z,1478845876.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:17.292Z,1478845877.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:17.308Z,1478845877.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:17.535Z,1478845877.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:17.692Z,1478845877.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:17.706Z,1478845877.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:18.095Z,1478845878.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:18.111Z,1478845878.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:18.334Z,1478845878.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:18.501Z,1478845878.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:18.517Z,1478845878.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:18.740Z,1478845878.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:18.893Z,1478845878.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:18.913Z,1478845878.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:19.296Z,1478845879.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:19.312Z,1478845879.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:19.318Z,1478845879.318 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:19.318Z,1478845879.318 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 15
2016-11-11T06:31:19.318Z,1478845879.318 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:31:19.333Z,1478845879.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:31:19.536Z,1478845879.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:19.685Z,1478845879.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:19.710Z,1478845879.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:19.729Z,1478845879.729 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:31:19.729Z,1478845879.730 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 15
2016-11-11T06:31:20.085Z,1478845880.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:20.113Z,1478845880.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:20.119Z,1478845880.119 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:31:20.119Z,1478845880.119 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:31:20.120Z,1478845880.120 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:31:20.332Z,1478845880.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:20.485Z,1478845880.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:20.517Z,1478845880.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:20.740Z,1478845880.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:20.885Z,1478845880.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:20.917Z,1478845880.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:21.285Z,1478845881.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:21.321Z,1478845881.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:21.536Z,1478845881.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:21.685Z,1478845881.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:21.717Z,1478845881.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:22.093Z,1478845882.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:22.119Z,1478845882.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:22.332Z,1478845882.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:22.493Z,1478845882.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:22.520Z,1478845882.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:22.740Z,1478845882.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:22.889Z,1478845882.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:22.915Z,1478845882.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:23.285Z,1478845883.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:23.317Z,1478845883.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:23.536Z,1478845883.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:23.685Z,1478845883.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:23.724Z,1478845883.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:24.089Z,1478845884.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:24.129Z,1478845884.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:24.333Z,1478845884.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:24.497Z,1478845884.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:24.533Z,1478845884.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:24.768Z,1478845884.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:24.895Z,1478845884.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:24.910Z,1478845884.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:25.292Z,1478845885.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:25.316Z,1478845885.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:25.564Z,1478845885.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:25.686Z,1478845885.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:25.721Z,1478845885.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:26.085Z,1478845886.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:26.137Z,1478845886.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:26.360Z,1478845886.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:27.088Z,1478845887.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:27.884Z,1478845887.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:28.680Z,1478845888.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:29.088Z,1478845889.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:29.520Z,1478845889.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:29.586Z,1478845889.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:29.689Z,1478845889.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:29.717Z,1478845889.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:30.045Z,1478845890.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:30.097Z,1478845890.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:30.445Z,1478845890.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:30.488Z,1478845890.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:30.853Z,1478845890.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:30.901Z,1478845890.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:31.250Z,1478845891.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:31.298Z,1478845891.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:31.648Z,1478845891.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:31.690Z,1478845891.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:32.049Z,1478845892.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:32.064Z,1478845892.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:32.450Z,1478845892.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:32.469Z,1478845892.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:32.857Z,1478845892.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:32.872Z,1478845892.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:33.252Z,1478845893.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:33.268Z,1478845893.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:33.651Z,1478845893.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:33.673Z,1478845893.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:34.052Z,1478845894.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:34.067Z,1478845894.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:34.451Z,1478845894.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:34.466Z,1478845894.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:34.859Z,1478845894.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:34.875Z,1478845894.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:35.252Z,1478845895.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:35.266Z,1478845895.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:35.652Z,1478845895.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:35.667Z,1478845895.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:36.052Z,1478845896.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:36.067Z,1478845896.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:36.453Z,1478845896.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:36.473Z,1478845896.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:36.857Z,1478845896.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:36.877Z,1478845896.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:37.245Z,1478845897.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:37.278Z,1478845897.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:37.645Z,1478845897.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:37.670Z,1478845897.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:38.045Z,1478845898.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:38.079Z,1478845898.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:38.445Z,1478845898.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:38.481Z,1478845898.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:38.857Z,1478845898.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:38.878Z,1478845898.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:39.249Z,1478845899.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:39.281Z,1478845899.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:39.645Z,1478845899.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:39.678Z,1478845899.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:40.049Z,1478845900.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:40.074Z,1478845900.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:40.445Z,1478845900.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:40.465Z,1478845900.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:40.851Z,1478845900.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:40.890Z,1478845900.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:41.256Z,1478845901.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:41.289Z,1478845901.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:41.649Z,1478845901.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:41.674Z,1478845901.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:42.045Z,1478845902.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:42.081Z,1478845902.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:42.445Z,1478845902.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:42.461Z,1478845902.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:42.861Z,1478845902.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:42.892Z,1478845902.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:43.256Z,1478845903.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:43.329Z,1478845903.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:43.653Z,1478845903.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:43.668Z,1478845903.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:44.051Z,1478845904.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:44.068Z,1478845904.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:44.451Z,1478845904.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:44.498Z,1478845904.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:44.848Z,1478845904.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:44.871Z,1478845904.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:45.253Z,1478845905.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:45.314Z,1478845905.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:45.653Z,1478845905.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:45.710Z,1478845905.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:46.048Z,1478845906.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:46.071Z,1478845906.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:46.461Z,1478845906.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:46.481Z,1478845906.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:46.857Z,1478845906.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:46.877Z,1478845906.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:47.245Z,1478845907.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:47.277Z,1478845907.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:47.645Z,1478845907.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:47.677Z,1478845907.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:48.045Z,1478845908.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:48.079Z,1478845908.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:48.464Z,1478845908.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:48.479Z,1478845908.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:48.845Z,1478845908.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:48.874Z,1478845908.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:49.245Z,1478845909.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:49.280Z,1478845909.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:49.645Z,1478845909.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:49.681Z,1478845909.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:50.045Z,1478845910.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:50.068Z,1478845910.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:50.453Z,1478845910.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:50.485Z,1478845910.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:50.849Z,1478845910.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:50.885Z,1478845910.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:51.245Z,1478845911.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:51.285Z,1478845911.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:51.645Z,1478845911.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:51.665Z,1478845911.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:52.045Z,1478845912.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:52.065Z,1478845912.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:52.461Z,1478845912.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:52.491Z,1478845912.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:52.849Z,1478845912.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:52.869Z,1478845912.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:53.253Z,1478845913.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:53.269Z,1478845913.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:53.652Z,1478845913.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:53.668Z,1478845913.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:54.051Z,1478845914.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:54.066Z,1478845914.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:54.455Z,1478845914.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:54.471Z,1478845914.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:54.856Z,1478845914.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:54.872Z,1478845914.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:55.256Z,1478845915.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:55.270Z,1478845915.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:55.419Z,1478845915.419 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T06:31:55.419Z,1478845915.419 [Rowe_600LCM] Communications Fault, FailCount= 1
2016-11-11T06:31:55.419Z,1478845915.419 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T06:31:55.645Z,1478845915.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:55.679Z,1478845915.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T06:31:55.680Z,1478845915.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:55.716Z,1478845915.717 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T06:31:55.823Z,1478845915.823 [Rowe_600LCM](INFO): Powering down
2016-11-11T06:31:56.045Z,1478845916.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:56.077Z,1478845916.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T06:31:56.078Z,1478845916.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:56.449Z,1478845916.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:56.482Z,1478845916.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:31:56.483Z,1478845916.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:56.844Z,1478845916.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:56.877Z,1478845916.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:31:56.878Z,1478845916.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:57.260Z,1478845917.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:57.279Z,1478845917.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:31:57.280Z,1478845917.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:57.320Z,1478845917.320 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T06:31:57.320Z,1478845917.320 [Rowe_600LCM] No Fault, FailCount= 1
2016-11-11T06:31:57.439Z,1478845917.439 [Rowe_600LCM](INFO): Initializing
2016-11-11T06:31:57.440Z,1478845917.440 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T06:31:57.440Z,1478845917.440 [Rowe_600LCM](INFO): LCM OK
2016-11-11T06:31:57.440Z,1478845917.440 [Rowe_600LCM](INFO): Powering up
2016-11-11T06:31:57.645Z,1478845917.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:57.717Z,1478845917.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T06:31:57.718Z,1478845917.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:58.045Z,1478845918.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:58.073Z,1478845918.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T06:31:58.074Z,1478845918.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:58.452Z,1478845918.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:58.507Z,1478845918.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T06:31:58.508Z,1478845918.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:58.853Z,1478845918.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:58.868Z,1478845918.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T06:31:58.869Z,1478845918.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:59.253Z,1478845919.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:59.306Z,1478845919.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T06:31:59.308Z,1478845919.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:31:59.653Z,1478845919.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:31:59.668Z,1478845919.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T06:31:59.669Z,1478845919.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:00.058Z,1478845920.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:00.109Z,1478845920.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T06:32:00.111Z,1478845920.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:00.454Z,1478845920.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:00.468Z,1478845920.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T06:32:00.469Z,1478845920.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:00.852Z,1478845920.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:00.875Z,1478845920.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T06:32:00.876Z,1478845920.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:01.249Z,1478845921.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:01.280Z,1478845921.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T06:32:01.281Z,1478845921.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:01.572Z,1478845921.572 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T06:32:01.662Z,1478845921.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:01.679Z,1478845921.679 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T06:32:01.680Z,1478845921.680 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T06:32:01.682Z,1478845921.682 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T06:32:01.683Z,1478845921.683 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T06:32:01.724Z,1478845921.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2016-11-11T06:32:01.725Z,1478845921.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:02.046Z,1478845922.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:02.062Z,1478845922.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T06:32:02.062Z,1478845922.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:02.445Z,1478845922.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:02.482Z,1478845922.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:02.852Z,1478845922.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:02.867Z,1478845922.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:03.256Z,1478845923.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:03.278Z,1478845923.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:03.652Z,1478845923.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:03.673Z,1478845923.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:04.045Z,1478845924.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:04.080Z,1478845924.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:04.457Z,1478845924.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:04.473Z,1478845924.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:04.845Z,1478845924.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:04.879Z,1478845924.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:05.245Z,1478845925.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:05.285Z,1478845925.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:05.653Z,1478845925.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:05.685Z,1478845925.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:06.047Z,1478845926.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:06.088Z,1478845926.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:06.445Z,1478845926.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:06.487Z,1478845926.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:06.845Z,1478845926.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:06.861Z,1478845926.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:07.249Z,1478845927.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:07.290Z,1478845927.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:07.649Z,1478845927.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:07.666Z,1478845927.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:08.051Z,1478845928.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:08.066Z,1478845928.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:08.452Z,1478845928.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:08.473Z,1478845928.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:08.853Z,1478845928.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:08.873Z,1478845928.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:09.256Z,1478845929.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:09.272Z,1478845929.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:09.651Z,1478845929.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:09.674Z,1478845929.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:10.045Z,1478845930.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:10.077Z,1478845930.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:10.465Z,1478845930.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:10.485Z,1478845930.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:10.850Z,1478845930.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:10.882Z,1478845930.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:11.252Z,1478845931.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:11.288Z,1478845931.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:11.649Z,1478845931.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:11.709Z,1478845931.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:12.045Z,1478845932.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:12.081Z,1478845932.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:12.445Z,1478845932.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:12.505Z,1478845932.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:12.846Z,1478845932.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:12.878Z,1478845932.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:13.254Z,1478845933.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:13.277Z,1478845933.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:13.657Z,1478845933.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:13.717Z,1478845933.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:14.056Z,1478845934.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:14.072Z,1478845934.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:14.452Z,1478845934.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:14.502Z,1478845934.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:14.854Z,1478845934.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:14.902Z,1478845934.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:15.264Z,1478845935.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:15.285Z,1478845935.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:15.646Z,1478845935.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:15.677Z,1478845935.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:16.060Z,1478845936.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:16.075Z,1478845936.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:16.446Z,1478845936.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:16.485Z,1478845936.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:16.849Z,1478845936.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:16.873Z,1478845936.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:17.251Z,1478845937.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:17.289Z,1478845937.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:17.646Z,1478845937.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:17.685Z,1478845937.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:18.045Z,1478845938.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:18.065Z,1478845938.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:18.445Z,1478845938.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:18.465Z,1478845938.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:18.848Z,1478845938.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:18.864Z,1478845938.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:19.256Z,1478845939.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:19.275Z,1478845939.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:19.653Z,1478845939.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:19.668Z,1478845939.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:20.057Z,1478845940.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:20.072Z,1478845940.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:20.452Z,1478845940.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:20.478Z,1478845940.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:20.852Z,1478845940.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:20.867Z,1478845940.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:21.276Z,1478845941.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:21.316Z,1478845941.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:21.664Z,1478845941.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:21.710Z,1478845941.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:22.045Z,1478845942.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:22.070Z,1478845942.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:22.445Z,1478845942.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:22.478Z,1478845942.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:22.856Z,1478845942.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:22.871Z,1478845942.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:23.245Z,1478845943.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:23.277Z,1478845943.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:23.660Z,1478845943.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:23.681Z,1478845943.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:24.045Z,1478845944.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:24.077Z,1478845944.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:24.449Z,1478845944.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:24.477Z,1478845944.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:24.845Z,1478845944.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:24.877Z,1478845944.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:25.264Z,1478845945.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:25.280Z,1478845945.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:25.645Z,1478845945.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:25.677Z,1478845945.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:26.049Z,1478845946.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:26.075Z,1478845946.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:26.465Z,1478845946.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:26.480Z,1478845946.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:29.918Z,1478845949.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:29.997Z,1478845949.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:30.090Z,1478845950.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:30.129Z,1478845950.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:30.479Z,1478845950.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:30.506Z,1478845950.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:30.876Z,1478845950.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:30.936Z,1478845950.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:31.277Z,1478845951.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:31.292Z,1478845951.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:31.685Z,1478845951.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:31.737Z,1478845951.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:32.076Z,1478845952.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:32.132Z,1478845952.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:32.469Z,1478845952.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:32.501Z,1478845952.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:32.869Z,1478845952.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:32.902Z,1478845952.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:33.285Z,1478845953.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:33.300Z,1478845953.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:33.680Z,1478845953.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:33.708Z,1478845953.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:34.069Z,1478845954.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:34.103Z,1478845954.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:34.473Z,1478845954.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:34.509Z,1478845954.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:34.869Z,1478845954.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:34.900Z,1478845954.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:35.271Z,1478845955.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:35.313Z,1478845955.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:35.669Z,1478845955.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:35.689Z,1478845955.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:36.074Z,1478845956.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:36.090Z,1478845956.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:36.472Z,1478845956.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:36.493Z,1478845956.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:36.872Z,1478845956.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:36.901Z,1478845956.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:37.276Z,1478845957.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:37.291Z,1478845957.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:37.685Z,1478845957.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:37.708Z,1478845957.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:38.084Z,1478845958.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:38.103Z,1478845958.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:38.469Z,1478845958.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:38.501Z,1478845958.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:38.869Z,1478845958.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:38.904Z,1478845958.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:39.273Z,1478845959.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:39.305Z,1478845959.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:39.669Z,1478845959.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:39.695Z,1478845959.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:40.073Z,1478845960.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:40.106Z,1478845960.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:40.473Z,1478845960.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:40.505Z,1478845960.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:40.870Z,1478845960.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:40.901Z,1478845960.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:41.269Z,1478845961.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:41.302Z,1478845961.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:41.669Z,1478845961.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:41.705Z,1478845961.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:42.069Z,1478845962.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:42.105Z,1478845962.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:42.469Z,1478845962.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:42.514Z,1478845962.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:42.869Z,1478845962.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:42.886Z,1478845962.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:43.269Z,1478845963.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:43.290Z,1478845963.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:43.677Z,1478845963.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:43.694Z,1478845963.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:44.072Z,1478845964.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:44.087Z,1478845964.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:44.476Z,1478845964.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:44.553Z,1478845964.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:44.876Z,1478845964.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:44.897Z,1478845964.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:45.276Z,1478845965.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:45.332Z,1478845965.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:45.683Z,1478845965.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:45.698Z,1478845965.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:46.077Z,1478845966.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:46.133Z,1478845966.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:46.469Z,1478845966.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:46.510Z,1478845966.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:46.869Z,1478845966.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:46.901Z,1478845966.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:47.269Z,1478845967.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:47.305Z,1478845967.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:47.673Z,1478845967.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:47.698Z,1478845967.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:48.069Z,1478845968.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:48.100Z,1478845968.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:48.469Z,1478845968.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:48.504Z,1478845968.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:48.869Z,1478845968.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:48.896Z,1478845968.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:49.269Z,1478845969.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:49.284Z,1478845969.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:49.677Z,1478845969.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:49.713Z,1478845969.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:50.072Z,1478845970.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:50.093Z,1478845970.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:50.472Z,1478845970.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:50.488Z,1478845970.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:50.876Z,1478845970.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:50.891Z,1478845970.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:51.275Z,1478845971.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:51.297Z,1478845971.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:51.676Z,1478845971.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:51.692Z,1478845971.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:52.076Z,1478845972.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:52.097Z,1478845972.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:52.476Z,1478845972.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:52.497Z,1478845972.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:52.876Z,1478845972.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:52.891Z,1478845972.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:53.269Z,1478845973.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:53.302Z,1478845973.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:53.685Z,1478845973.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:53.700Z,1478845973.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:54.069Z,1478845974.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:54.107Z,1478845974.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:54.469Z,1478845974.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:54.505Z,1478845974.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:54.873Z,1478845974.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:54.905Z,1478845974.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:55.269Z,1478845975.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:55.301Z,1478845975.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:55.673Z,1478845975.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:55.698Z,1478845975.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:56.069Z,1478845976.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:56.101Z,1478845976.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:56.469Z,1478845976.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:56.497Z,1478845976.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:56.869Z,1478845976.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:56.896Z,1478845976.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:57.269Z,1478845977.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:57.289Z,1478845977.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:57.674Z,1478845977.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:57.713Z,1478845977.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:58.072Z,1478845978.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:58.093Z,1478845978.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:58.475Z,1478845978.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:58.556Z,1478845978.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:58.876Z,1478845978.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:58.891Z,1478845978.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:59.285Z,1478845979.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:59.300Z,1478845979.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:32:59.676Z,1478845979.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:32:59.727Z,1478845979.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:00.076Z,1478845980.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:00.091Z,1478845980.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:00.469Z,1478845980.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:00.518Z,1478845980.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:00.869Z,1478845980.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:00.918Z,1478845980.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:01.269Z,1478845981.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:01.294Z,1478845981.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:01.669Z,1478845981.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:01.701Z,1478845981.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:02.069Z,1478845982.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:02.112Z,1478845982.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:02.469Z,1478845982.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:02.509Z,1478845982.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:02.871Z,1478845982.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:02.886Z,1478845982.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:03.284Z,1478845983.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:03.348Z,1478845983.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:03.679Z,1478845983.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:03.707Z,1478845983.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:04.071Z,1478845984.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:04.109Z,1478845984.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:04.471Z,1478845984.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:04.517Z,1478845984.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:04.871Z,1478845984.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:04.906Z,1478845984.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:05.275Z,1478845985.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:05.290Z,1478845985.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:05.671Z,1478845985.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:05.713Z,1478845985.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:06.071Z,1478845986.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:06.119Z,1478845986.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:06.471Z,1478845986.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:06.521Z,1478845986.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:06.871Z,1478845986.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:06.907Z,1478845986.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:07.278Z,1478845987.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:07.310Z,1478845987.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:07.678Z,1478845987.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:07.709Z,1478845987.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:08.071Z,1478845988.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:08.109Z,1478845988.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:08.471Z,1478845988.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:08.518Z,1478845988.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:08.871Z,1478845988.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:08.913Z,1478845988.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:09.271Z,1478845989.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:09.315Z,1478845989.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:09.671Z,1478845989.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:09.720Z,1478845989.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:10.074Z,1478845990.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:10.138Z,1478845990.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:10.489Z,1478845990.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:10.529Z,1478845990.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:10.884Z,1478845990.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:10.901Z,1478845990.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:11.269Z,1478845991.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:11.302Z,1478845991.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:11.678Z,1478845991.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:11.718Z,1478845991.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:12.077Z,1478845992.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:12.102Z,1478845992.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:12.469Z,1478845992.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:12.541Z,1478845992.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:12.877Z,1478845992.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:12.933Z,1478845992.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:13.277Z,1478845993.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:13.309Z,1478845993.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:13.677Z,1478845993.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:13.745Z,1478845993.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:14.069Z,1478845994.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:14.124Z,1478845994.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:14.500Z,1478845994.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:14.561Z,1478845994.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:14.875Z,1478845994.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:14.921Z,1478845994.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:15.285Z,1478845995.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:15.320Z,1478845995.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:15.671Z,1478845995.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:15.698Z,1478845995.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:16.091Z,1478845996.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:16.110Z,1478845996.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:16.479Z,1478845996.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:16.557Z,1478845996.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:16.875Z,1478845996.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:16.915Z,1478845996.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:17.273Z,1478845997.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:17.305Z,1478845997.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:17.671Z,1478845997.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:17.709Z,1478845997.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:18.098Z,1478845998.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:18.126Z,1478845998.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:18.473Z,1478845998.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:18.497Z,1478845998.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:18.876Z,1478845998.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:18.909Z,1478845998.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:19.270Z,1478845999.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:19.322Z,1478845999.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:19.675Z,1478845999.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:19.739Z,1478845999.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:20.080Z,1478846000.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:20.127Z,1478846000.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:20.480Z,1478846000.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:20.503Z,1478846000.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:20.880Z,1478846000.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:20.904Z,1478846000.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:21.272Z,1478846001.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:21.313Z,1478846001.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:21.671Z,1478846001.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:21.702Z,1478846001.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:22.093Z,1478846002.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:22.122Z,1478846002.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:22.477Z,1478846002.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:22.497Z,1478846002.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:22.879Z,1478846002.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:22.895Z,1478846002.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:23.281Z,1478846003.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:23.297Z,1478846003.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:23.683Z,1478846003.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:23.703Z,1478846003.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:24.076Z,1478846004.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:24.092Z,1478846004.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:24.484Z,1478846004.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:24.499Z,1478846004.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:24.869Z,1478846004.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:24.906Z,1478846004.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:25.277Z,1478846005.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:25.310Z,1478846005.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:25.677Z,1478846005.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:25.709Z,1478846005.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:26.069Z,1478846006.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:26.112Z,1478846006.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:26.469Z,1478846006.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:26.513Z,1478846006.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:29.917Z,1478846009.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:30.041Z,1478846010.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:30.137Z,1478846010.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:30.169Z,1478846010.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:30.527Z,1478846010.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:30.579Z,1478846010.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:30.933Z,1478846010.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:30.953Z,1478846010.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:31.328Z,1478846011.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:31.380Z,1478846011.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:31.717Z,1478846011.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:31.792Z,1478846011.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:32.117Z,1478846012.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:32.142Z,1478846012.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:32.517Z,1478846012.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:32.549Z,1478846012.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:32.921Z,1478846012.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:32.953Z,1478846012.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:33.321Z,1478846013.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:33.347Z,1478846013.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:33.728Z,1478846013.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:33.760Z,1478846013.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:34.120Z,1478846014.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:34.141Z,1478846014.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:34.517Z,1478846014.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:34.541Z,1478846014.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:34.925Z,1478846014.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:34.941Z,1478846014.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:35.325Z,1478846015.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:35.341Z,1478846015.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:35.717Z,1478846015.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:35.732Z,1478846015.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:36.117Z,1478846016.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:36.148Z,1478846016.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:36.520Z,1478846016.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:36.535Z,1478846016.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:36.920Z,1478846016.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:36.935Z,1478846016.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:37.324Z,1478846017.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:37.341Z,1478846017.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:37.719Z,1478846017.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:37.751Z,1478846017.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:38.124Z,1478846018.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:38.139Z,1478846018.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:38.525Z,1478846018.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:38.541Z,1478846018.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:38.917Z,1478846018.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:38.953Z,1478846018.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:39.317Z,1478846019.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:39.342Z,1478846019.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:39.728Z,1478846019.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:39.751Z,1478846019.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:40.121Z,1478846020.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:40.153Z,1478846020.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:40.517Z,1478846020.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:40.549Z,1478846020.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:40.917Z,1478846020.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:40.949Z,1478846020.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:41.317Z,1478846021.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:41.353Z,1478846021.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:41.721Z,1478846021.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:41.753Z,1478846021.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:42.117Z,1478846022.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:42.157Z,1478846022.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:42.521Z,1478846022.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:42.536Z,1478846022.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:42.917Z,1478846022.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:42.941Z,1478846022.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:43.317Z,1478846023.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:43.337Z,1478846023.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:43.721Z,1478846023.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:43.785Z,1478846023.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:44.117Z,1478846024.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:44.132Z,1478846024.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:44.521Z,1478846024.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:44.536Z,1478846024.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:44.917Z,1478846024.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:44.967Z,1478846024.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:45.321Z,1478846025.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:45.336Z,1478846025.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:45.714Z,1478846025.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:45.761Z,1478846025.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:46.121Z,1478846026.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:46.163Z,1478846026.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:46.517Z,1478846026.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:46.532Z,1478846026.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:46.921Z,1478846026.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:46.937Z,1478846026.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:47.321Z,1478846027.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:47.355Z,1478846027.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:47.721Z,1478846027.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:47.741Z,1478846027.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:48.117Z,1478846028.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:48.132Z,1478846028.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:48.517Z,1478846028.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:48.537Z,1478846028.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:48.921Z,1478846028.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:48.936Z,1478846028.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:49.317Z,1478846029.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:49.332Z,1478846029.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:49.721Z,1478846029.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:49.741Z,1478846029.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:50.117Z,1478846030.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:50.132Z,1478846030.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:50.521Z,1478846030.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:50.536Z,1478846030.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:50.917Z,1478846030.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:50.938Z,1478846030.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:51.321Z,1478846031.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:51.336Z,1478846031.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:51.717Z,1478846031.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:51.733Z,1478846031.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:52.121Z,1478846032.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:52.141Z,1478846032.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:52.517Z,1478846032.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:52.532Z,1478846032.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:52.914Z,1478846032.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:52.929Z,1478846032.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:53.321Z,1478846033.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:53.343Z,1478846033.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:53.721Z,1478846033.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:53.741Z,1478846033.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:54.121Z,1478846034.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:54.136Z,1478846034.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:54.517Z,1478846034.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:54.537Z,1478846034.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:54.921Z,1478846034.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:54.941Z,1478846034.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:55.317Z,1478846035.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:55.337Z,1478846035.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:55.720Z,1478846035.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:55.741Z,1478846035.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:56.117Z,1478846036.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:56.138Z,1478846036.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:56.521Z,1478846036.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:56.541Z,1478846036.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:56.922Z,1478846036.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:56.964Z,1478846036.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:57.321Z,1478846037.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:57.336Z,1478846037.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:57.721Z,1478846037.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:57.741Z,1478846037.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:58.117Z,1478846038.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:58.181Z,1478846038.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:58.195Z,1478846038.195 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T06:33:58.195Z,1478846038.195 [Rowe_600LCM] Communications Fault, FailCount= 2
2016-11-11T06:33:58.195Z,1478846038.195 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T06:33:58.202Z,1478846038.202 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T06:33:58.521Z,1478846038.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:58.535Z,1478846038.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T06:33:58.536Z,1478846038.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:58.599Z,1478846038.599 [Rowe_600LCM](INFO): Powering down
2016-11-11T06:33:58.917Z,1478846038.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:58.961Z,1478846038.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T06:33:58.962Z,1478846038.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:59.329Z,1478846039.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:59.358Z,1478846039.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:33:59.363Z,1478846039.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:33:59.717Z,1478846039.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:33:59.769Z,1478846039.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:33:59.770Z,1478846039.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:00.121Z,1478846040.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:00.176Z,1478846040.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:34:00.177Z,1478846040.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:00.197Z,1478846040.197 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T06:34:00.197Z,1478846040.197 [Rowe_600LCM] No Fault, FailCount= 2
2016-11-11T06:34:00.215Z,1478846040.215 [Rowe_600LCM](INFO): Initializing
2016-11-11T06:34:00.216Z,1478846040.216 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T06:34:00.216Z,1478846040.216 [Rowe_600LCM](INFO): LCM OK
2016-11-11T06:34:00.216Z,1478846040.216 [Rowe_600LCM](INFO): Powering up
2016-11-11T06:34:00.516Z,1478846040.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:00.537Z,1478846040.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T06:34:00.538Z,1478846040.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:00.921Z,1478846040.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:00.940Z,1478846040.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T06:34:00.941Z,1478846040.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:01.317Z,1478846041.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:01.335Z,1478846041.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T06:34:01.336Z,1478846041.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:01.721Z,1478846041.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:01.741Z,1478846041.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T06:34:01.742Z,1478846041.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:02.117Z,1478846042.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:02.137Z,1478846042.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T06:34:02.139Z,1478846042.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:02.521Z,1478846042.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:02.540Z,1478846042.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T06:34:02.541Z,1478846042.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:02.918Z,1478846042.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:02.936Z,1478846042.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T06:34:02.937Z,1478846042.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:03.321Z,1478846043.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:03.347Z,1478846043.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T06:34:03.349Z,1478846043.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:03.715Z,1478846043.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:03.729Z,1478846043.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2016-11-11T06:34:03.731Z,1478846043.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:04.118Z,1478846044.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:04.137Z,1478846044.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T06:34:04.138Z,1478846044.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:04.334Z,1478846044.334 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T06:34:04.398Z,1478846044.398 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T06:34:04.400Z,1478846044.400 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T06:34:04.401Z,1478846044.401 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T06:34:04.402Z,1478846044.402 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T06:34:04.520Z,1478846044.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:04.538Z,1478846044.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T06:34:04.539Z,1478846044.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:04.915Z,1478846044.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:04.952Z,1478846044.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:05.322Z,1478846045.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:05.342Z,1478846045.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:05.724Z,1478846045.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:05.741Z,1478846045.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:06.124Z,1478846046.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:06.140Z,1478846046.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:06.518Z,1478846046.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:06.561Z,1478846046.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:06.921Z,1478846046.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:06.942Z,1478846046.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:07.323Z,1478846047.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:07.342Z,1478846047.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:07.720Z,1478846047.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:07.742Z,1478846047.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:08.150Z,1478846048.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:08.195Z,1478846048.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:08.517Z,1478846048.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:08.550Z,1478846048.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:08.919Z,1478846048.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:08.945Z,1478846048.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:09.320Z,1478846049.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:09.349Z,1478846049.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:09.717Z,1478846049.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:09.755Z,1478846049.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:10.117Z,1478846050.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:10.144Z,1478846050.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:10.518Z,1478846050.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:10.543Z,1478846050.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:10.919Z,1478846050.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:10.945Z,1478846050.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:11.317Z,1478846051.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:11.350Z,1478846051.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:11.718Z,1478846051.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:11.745Z,1478846051.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:12.120Z,1478846052.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:12.189Z,1478846052.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:12.520Z,1478846052.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:12.561Z,1478846052.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:12.917Z,1478846052.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:12.949Z,1478846052.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:13.318Z,1478846053.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:13.365Z,1478846053.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:13.719Z,1478846053.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:13.753Z,1478846053.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:14.119Z,1478846054.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:14.173Z,1478846054.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:14.525Z,1478846054.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:14.585Z,1478846054.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:14.928Z,1478846054.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:14.934Z,1478846054.934 [PNI_TCM](ERROR): CRC does not match. Expected:0x38055 got:0x49415
2016-11-11T06:34:14.954Z,1478846054.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:15.338Z,1478846055.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:15.358Z,1478846055.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:15.719Z,1478846055.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:15.753Z,1478846055.753 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:15.753Z,1478846055.753 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2016-11-11T06:34:15.753Z,1478846055.753 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:34:15.760Z,1478846055.760 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:15.760Z,1478846055.760 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2016-11-11T06:34:15.760Z,1478846055.760 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:34:15.775Z,1478846055.776 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:34:15.776Z,1478846055.776 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:34:16.117Z,1478846056.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:16.169Z,1478846056.169 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:34:16.169Z,1478846056.170 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2016-11-11T06:34:16.170Z,1478846056.170 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:34:16.170Z,1478846056.170 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2016-11-11T06:34:16.517Z,1478846056.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:16.526Z,1478846056.526 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T06:34:16.552Z,1478846056.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:34:16.552Z,1478846056.552 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:34:16.553Z,1478846056.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:34:16.557Z,1478846056.557 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:34:16.558Z,1478846056.558 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:34:16.558Z,1478846056.558 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:34:16.919Z,1478846056.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:16.943Z,1478846056.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:17.318Z,1478846057.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:17.345Z,1478846057.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:17.728Z,1478846057.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:17.744Z,1478846057.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:18.124Z,1478846058.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:18.147Z,1478846058.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:18.526Z,1478846058.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:18.549Z,1478846058.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:18.917Z,1478846058.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:18.953Z,1478846058.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:19.327Z,1478846059.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:19.361Z,1478846059.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:19.719Z,1478846059.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:19.756Z,1478846059.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:20.119Z,1478846060.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:20.156Z,1478846060.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:20.163Z,1478846060.163 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:20.163Z,1478846060.163 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 16
2016-11-11T06:34:20.163Z,1478846060.163 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:34:20.177Z,1478846060.177 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:34:20.520Z,1478846060.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:20.536Z,1478846060.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:20.575Z,1478846060.575 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:34:20.576Z,1478846060.576 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 16
2016-11-11T06:34:20.918Z,1478846060.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:20.955Z,1478846060.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:20.961Z,1478846060.961 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:34:20.961Z,1478846060.961 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:34:20.962Z,1478846060.962 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:34:21.330Z,1478846061.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:21.361Z,1478846061.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:21.719Z,1478846061.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:21.749Z,1478846061.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:22.117Z,1478846062.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:22.150Z,1478846062.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:22.518Z,1478846062.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:22.545Z,1478846062.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:22.919Z,1478846062.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:22.950Z,1478846062.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:23.321Z,1478846063.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:23.407Z,1478846063.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:23.717Z,1478846063.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:23.757Z,1478846063.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:24.125Z,1478846064.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:24.140Z,1478846064.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:24.522Z,1478846064.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:24.557Z,1478846064.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:24.921Z,1478846064.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:24.941Z,1478846064.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:25.333Z,1478846065.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:25.386Z,1478846065.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:25.732Z,1478846065.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:25.746Z,1478846065.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:26.122Z,1478846066.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:26.149Z,1478846066.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:26.529Z,1478846066.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:26.601Z,1478846066.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:29.928Z,1478846069.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:29.944Z,1478846069.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:30.052Z,1478846070.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:30.086Z,1478846070.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:30.441Z,1478846070.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:30.491Z,1478846070.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:30.837Z,1478846070.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:30.869Z,1478846070.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:31.239Z,1478846071.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:31.307Z,1478846071.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:31.641Z,1478846071.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:31.697Z,1478846071.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:32.032Z,1478846072.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:32.069Z,1478846072.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:32.441Z,1478846072.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:32.458Z,1478846072.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:32.833Z,1478846072.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:32.868Z,1478846072.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:33.248Z,1478846073.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:33.272Z,1478846073.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:33.633Z,1478846073.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:33.669Z,1478846073.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:34.034Z,1478846074.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:34.066Z,1478846074.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:34.433Z,1478846074.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:34.465Z,1478846074.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:34.834Z,1478846074.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:34.866Z,1478846074.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:35.234Z,1478846075.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:35.270Z,1478846075.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:35.633Z,1478846075.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:35.657Z,1478846075.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:36.033Z,1478846076.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:36.049Z,1478846076.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:36.438Z,1478846076.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:36.454Z,1478846076.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:36.833Z,1478846076.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:36.861Z,1478846076.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:37.237Z,1478846077.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:37.274Z,1478846077.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:37.633Z,1478846077.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:37.653Z,1478846077.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:38.036Z,1478846078.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:38.051Z,1478846078.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:38.442Z,1478846078.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:38.458Z,1478846078.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:38.836Z,1478846078.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:38.861Z,1478846078.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:39.244Z,1478846079.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:39.259Z,1478846079.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:39.633Z,1478846079.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:39.675Z,1478846079.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:40.033Z,1478846080.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:40.076Z,1478846080.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:40.433Z,1478846080.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:40.448Z,1478846080.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:40.833Z,1478846080.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:40.853Z,1478846080.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:41.240Z,1478846081.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:41.265Z,1478846081.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:41.639Z,1478846081.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:41.661Z,1478846081.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:42.039Z,1478846082.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:42.054Z,1478846082.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:42.440Z,1478846082.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:42.458Z,1478846082.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:42.844Z,1478846082.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:42.864Z,1478846082.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:43.233Z,1478846083.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:43.259Z,1478846083.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:43.648Z,1478846083.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:43.718Z,1478846083.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:44.033Z,1478846084.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:44.089Z,1478846084.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:44.433Z,1478846084.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:44.448Z,1478846084.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:44.833Z,1478846084.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:44.853Z,1478846084.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:45.240Z,1478846085.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:45.294Z,1478846085.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:45.636Z,1478846085.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:45.675Z,1478846085.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:46.040Z,1478846086.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:46.091Z,1478846086.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:46.440Z,1478846086.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:46.495Z,1478846086.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:46.841Z,1478846086.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:46.857Z,1478846086.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:47.245Z,1478846087.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:47.281Z,1478846087.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:47.636Z,1478846087.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:47.687Z,1478846087.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:48.037Z,1478846088.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:48.052Z,1478846088.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:48.440Z,1478846088.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:48.455Z,1478846088.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:48.839Z,1478846088.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:48.855Z,1478846088.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:49.246Z,1478846089.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:49.264Z,1478846089.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:49.640Z,1478846089.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:49.674Z,1478846089.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:50.036Z,1478846090.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:50.052Z,1478846090.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:50.440Z,1478846090.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:50.459Z,1478846090.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:50.842Z,1478846090.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:50.860Z,1478846090.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:51.245Z,1478846091.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:51.271Z,1478846091.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:51.633Z,1478846091.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:51.666Z,1478846091.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:52.033Z,1478846092.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:52.072Z,1478846092.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:52.433Z,1478846092.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:52.469Z,1478846092.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:52.837Z,1478846092.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:52.883Z,1478846092.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:53.233Z,1478846093.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:53.272Z,1478846093.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:53.633Z,1478846093.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:53.656Z,1478846093.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:54.040Z,1478846094.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:54.058Z,1478846094.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:54.440Z,1478846094.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:54.488Z,1478846094.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:54.836Z,1478846094.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:54.860Z,1478846094.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:55.241Z,1478846095.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:55.271Z,1478846095.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:55.643Z,1478846095.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:55.672Z,1478846095.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:56.033Z,1478846096.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:56.076Z,1478846096.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:56.433Z,1478846096.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:56.470Z,1478846096.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:56.837Z,1478846096.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:56.874Z,1478846096.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:57.243Z,1478846097.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:57.265Z,1478846097.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:57.635Z,1478846097.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:57.674Z,1478846097.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:58.036Z,1478846098.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:58.068Z,1478846098.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:58.442Z,1478846098.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:58.517Z,1478846098.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:58.847Z,1478846098.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:58.943Z,1478846098.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:59.233Z,1478846099.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:59.271Z,1478846099.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:34:59.633Z,1478846099.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:34:59.681Z,1478846099.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:00.033Z,1478846100.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:00.060Z,1478846100.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:00.436Z,1478846100.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:00.477Z,1478846100.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:00.836Z,1478846100.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:00.897Z,1478846100.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:01.233Z,1478846101.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:01.273Z,1478846101.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:01.639Z,1478846101.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:01.669Z,1478846101.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:02.035Z,1478846102.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:02.068Z,1478846102.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:02.437Z,1478846102.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:02.481Z,1478846102.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:02.833Z,1478846102.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:02.852Z,1478846102.852 [PNI_TCM](ERROR): CRC does not match. Expected:0x62436 got:0x16962
2016-11-11T06:35:02.870Z,1478846102.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:03.234Z,1478846103.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:03.261Z,1478846103.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:03.640Z,1478846103.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:03.673Z,1478846103.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:04.033Z,1478846104.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:04.077Z,1478846104.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:04.437Z,1478846104.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:04.455Z,1478846104.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:04.839Z,1478846104.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:04.854Z,1478846104.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:05.239Z,1478846105.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:05.254Z,1478846105.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:05.641Z,1478846105.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:05.673Z,1478846105.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:06.047Z,1478846106.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:06.054Z,1478846106.054 [PNI_TCM](ERROR): CRC does not match. Expected:0x33673 got:0x48615
2016-11-11T06:35:06.081Z,1478846106.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:06.433Z,1478846106.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:06.468Z,1478846106.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:06.836Z,1478846106.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:06.871Z,1478846106.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:07.233Z,1478846107.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:07.312Z,1478846107.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:07.634Z,1478846107.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:07.655Z,1478846107.655 [PNI_TCM](ERROR): CRC does not match. Expected:0x56637 got:0x54300
2016-11-11T06:35:07.681Z,1478846107.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:08.035Z,1478846108.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:08.069Z,1478846108.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:08.436Z,1478846108.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:08.469Z,1478846108.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:08.837Z,1478846108.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:08.873Z,1478846108.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:09.234Z,1478846109.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:09.281Z,1478846109.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:09.635Z,1478846109.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:09.651Z,1478846109.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:10.041Z,1478846110.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:10.056Z,1478846110.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:10.443Z,1478846110.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:10.460Z,1478846110.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:10.846Z,1478846110.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:10.874Z,1478846110.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:11.235Z,1478846111.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:11.269Z,1478846111.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:11.641Z,1478846111.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:11.673Z,1478846111.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:12.033Z,1478846112.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:12.072Z,1478846112.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:12.435Z,1478846112.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:12.442Z,1478846112.442 [PNI_TCM](ERROR): CRC does not match. Expected:0x41118 got:0x6978
2016-11-11T06:35:12.464Z,1478846112.464 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T06:35:12.464Z,1478846112.464 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:35:12.464Z,1478846112.464 [BPC1](ERROR): Data Fault
2016-11-11T06:35:12.489Z,1478846112.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:12.522Z,1478846112.523 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:35:12.839Z,1478846112.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:12.854Z,1478846112.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:13.234Z,1478846113.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:13.269Z,1478846113.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:13.634Z,1478846113.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:13.672Z,1478846113.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:13.704Z,1478846113.704 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:35:13.704Z,1478846113.704 [BPC1] No Fault, FailCount= 1
2016-11-11T06:35:14.036Z,1478846114.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:14.110Z,1478846114.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:14.436Z,1478846114.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:14.489Z,1478846114.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:14.833Z,1478846114.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:14.869Z,1478846114.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:15.234Z,1478846115.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:15.277Z,1478846115.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:15.635Z,1478846115.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:15.651Z,1478846115.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:16.034Z,1478846116.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:16.053Z,1478846116.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:16.440Z,1478846116.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:16.456Z,1478846116.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:16.839Z,1478846116.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:16.854Z,1478846116.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:17.247Z,1478846117.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:17.263Z,1478846117.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:17.641Z,1478846117.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:17.661Z,1478846117.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:18.040Z,1478846118.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:18.056Z,1478846118.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:18.443Z,1478846118.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:18.458Z,1478846118.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:18.843Z,1478846118.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:18.858Z,1478846118.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:19.255Z,1478846119.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:19.327Z,1478846119.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:19.640Z,1478846119.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:19.663Z,1478846119.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:20.035Z,1478846120.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:20.071Z,1478846120.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:20.443Z,1478846120.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:20.470Z,1478846120.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:20.833Z,1478846120.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:20.858Z,1478846120.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:21.233Z,1478846121.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:21.314Z,1478846121.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:21.647Z,1478846121.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:21.662Z,1478846121.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:22.042Z,1478846122.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:22.061Z,1478846122.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:22.433Z,1478846122.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:22.465Z,1478846122.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:22.833Z,1478846122.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:22.895Z,1478846122.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:23.244Z,1478846123.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:23.259Z,1478846123.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:23.641Z,1478846123.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:23.656Z,1478846123.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:24.040Z,1478846124.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:24.057Z,1478846124.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:24.436Z,1478846124.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:24.465Z,1478846124.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:24.843Z,1478846124.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:24.858Z,1478846124.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:25.233Z,1478846125.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:25.265Z,1478846125.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:25.633Z,1478846125.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:25.673Z,1478846125.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:25.690Z,1478846125.690 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T06:35:25.690Z,1478846125.690 [Default:CheckIn:C.Wait] Stopped
2016-11-11T06:35:25.690Z,1478846125.690 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T06:35:25.690Z,1478846125.690 [Default:CheckIn:D] Running Loop=1
2016-11-11T06:35:26.033Z,1478846126.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:26.069Z,1478846126.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:26.077Z,1478846126.077 [Default:CheckIn:D] Stopped
2016-11-11T06:35:26.077Z,1478846126.077 [Default:CheckIn:E] Running Loop=1
2016-11-11T06:35:26.435Z,1478846126.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:26.513Z,1478846126.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:26.526Z,1478846126.526 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 105.412785 min 
2016-11-11T06:35:26.526Z,1478846126.526 [Default:CheckIn:E] Stopped
2016-11-11T06:35:26.527Z,1478846126.527 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T06:35:26.527Z,1478846126.527 [Default:CheckIn] Stopped
2016-11-11T06:35:26.527Z,1478846126.527 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T06:35:26.531Z,1478846126.531 [Default:CheckIn](INFO): Running loop #11
2016-11-11T06:35:26.531Z,1478846126.531 [Default:CheckIn] Running Loop=11
2016-11-11T06:35:26.531Z,1478846126.532 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T06:35:26.532Z,1478846126.532 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T06:35:26.846Z,1478846126.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:26.929Z,1478846126.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:30.182Z,1478846130.182 [NAL9602](INFO): Powering up
2016-11-11T06:35:30.201Z,1478846130.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:30.257Z,1478846130.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:30.350Z,1478846130.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:30.394Z,1478846130.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:30.711Z,1478846130.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:30.764Z,1478846130.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:31.110Z,1478846131.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:31.167Z,1478846131.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:31.517Z,1478846131.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:31.553Z,1478846131.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:31.908Z,1478846131.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:31.936Z,1478846131.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:32.310Z,1478846132.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:32.326Z,1478846132.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:32.717Z,1478846132.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:32.732Z,1478846132.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:33.108Z,1478846133.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:33.131Z,1478846133.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:33.513Z,1478846133.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:33.533Z,1478846133.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:33.912Z,1478846133.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:33.938Z,1478846133.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:34.305Z,1478846134.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:34.340Z,1478846134.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:34.705Z,1478846134.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:34.741Z,1478846134.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:35.109Z,1478846135.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:35.135Z,1478846135.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:35.517Z,1478846135.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:35.553Z,1478846135.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:35.912Z,1478846135.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:35.927Z,1478846135.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:36.317Z,1478846136.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:36.332Z,1478846136.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:36.713Z,1478846136.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:36.733Z,1478846136.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:37.105Z,1478846137.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:37.141Z,1478846137.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:37.509Z,1478846137.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:37.537Z,1478846137.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:37.905Z,1478846137.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:37.945Z,1478846137.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:38.312Z,1478846138.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:38.344Z,1478846138.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:38.709Z,1478846138.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:38.745Z,1478846138.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:39.118Z,1478846139.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:39.149Z,1478846139.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:39.512Z,1478846139.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:39.527Z,1478846139.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:39.914Z,1478846139.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:39.929Z,1478846139.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:40.308Z,1478846140.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:40.336Z,1478846140.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:40.724Z,1478846140.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:40.745Z,1478846140.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:41.089Z,1478846141.089 [NAL9602](INFO): NAL9602 initialized
2016-11-11T06:35:41.105Z,1478846141.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:41.137Z,1478846141.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:41.505Z,1478846141.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:41.545Z,1478846141.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:41.920Z,1478846141.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:42.002Z,1478846142.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:42.320Z,1478846142.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:42.345Z,1478846142.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:42.722Z,1478846142.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:42.738Z,1478846142.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:43.105Z,1478846143.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:43.142Z,1478846143.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:43.506Z,1478846143.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:43.572Z,1478846143.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:43.911Z,1478846143.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:43.942Z,1478846143.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:44.312Z,1478846144.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:44.354Z,1478846144.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:44.709Z,1478846144.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:44.733Z,1478846144.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:45.112Z,1478846145.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:45.170Z,1478846145.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:45.513Z,1478846145.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:45.571Z,1478846145.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:45.908Z,1478846145.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:45.941Z,1478846145.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:46.314Z,1478846146.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:46.343Z,1478846146.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:46.708Z,1478846146.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:46.733Z,1478846146.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:47.113Z,1478846147.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:47.135Z,1478846147.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:47.513Z,1478846147.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:47.545Z,1478846147.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:47.906Z,1478846147.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:47.925Z,1478846147.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:47.987Z,1478846147.987 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T06:35:48.309Z,1478846148.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:48.328Z,1478846148.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:48.713Z,1478846148.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:48.740Z,1478846148.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:49.112Z,1478846149.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:49.139Z,1478846149.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:49.505Z,1478846149.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:49.541Z,1478846149.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:49.909Z,1478846149.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:49.945Z,1478846149.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:50.306Z,1478846150.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:50.349Z,1478846150.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:50.705Z,1478846150.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:50.745Z,1478846150.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:51.113Z,1478846151.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:51.149Z,1478846151.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:51.505Z,1478846151.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:51.525Z,1478846151.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:51.908Z,1478846151.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:51.929Z,1478846151.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:52.309Z,1478846152.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:52.329Z,1478846152.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:52.713Z,1478846152.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:52.728Z,1478846152.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:53.113Z,1478846153.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:53.128Z,1478846153.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:53.521Z,1478846153.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:53.541Z,1478846153.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:53.917Z,1478846153.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:53.933Z,1478846153.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:54.313Z,1478846154.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:54.336Z,1478846154.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:54.710Z,1478846154.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:54.735Z,1478846154.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:55.105Z,1478846155.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:55.145Z,1478846155.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:55.505Z,1478846155.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:55.529Z,1478846155.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:55.905Z,1478846155.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:55.962Z,1478846155.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:56.312Z,1478846156.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:56.348Z,1478846156.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:56.710Z,1478846156.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:56.730Z,1478846156.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:57.117Z,1478846157.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:57.133Z,1478846157.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:57.522Z,1478846157.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:57.593Z,1478846157.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:57.905Z,1478846157.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:57.939Z,1478846157.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:58.305Z,1478846158.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:58.341Z,1478846158.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:58.712Z,1478846158.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:58.796Z,1478846158.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:59.105Z,1478846159.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:59.141Z,1478846159.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:59.513Z,1478846159.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:59.563Z,1478846159.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:35:59.912Z,1478846159.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:35:59.975Z,1478846159.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:00.309Z,1478846160.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:00.324Z,1478846160.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:00.709Z,1478846160.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:00.729Z,1478846160.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:00.827Z,1478846160.827 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T06:36:00.827Z,1478846160.827 [Rowe_600LCM] Communications Fault, FailCount= 3
2016-11-11T06:36:00.827Z,1478846160.827 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T06:36:01.117Z,1478846161.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:01.132Z,1478846161.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T06:36:01.134Z,1478846161.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:01.232Z,1478846161.232 [Rowe_600LCM](INFO): Powering down
2016-11-11T06:36:01.243Z,1478846161.243 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T06:36:01.505Z,1478846161.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:01.540Z,1478846161.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T06:36:01.542Z,1478846161.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:01.909Z,1478846161.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:01.945Z,1478846161.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:36:01.953Z,1478846161.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:02.312Z,1478846162.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:02.327Z,1478846162.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:36:02.340Z,1478846162.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:02.705Z,1478846162.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:02.725Z,1478846162.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:36:02.726Z,1478846162.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:02.780Z,1478846162.780 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T06:36:02.780Z,1478846162.780 [Rowe_600LCM] No Fault, FailCount= 3
2016-11-11T06:36:02.847Z,1478846162.847 [Rowe_600LCM](INFO): Initializing
2016-11-11T06:36:02.848Z,1478846162.848 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T06:36:02.848Z,1478846162.848 [Rowe_600LCM](INFO): LCM OK
2016-11-11T06:36:02.848Z,1478846162.848 [Rowe_600LCM](INFO): Powering up
2016-11-11T06:36:03.114Z,1478846163.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:03.133Z,1478846163.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T06:36:03.134Z,1478846163.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:03.513Z,1478846163.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:03.532Z,1478846163.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T06:36:03.533Z,1478846163.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:03.913Z,1478846163.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:03.927Z,1478846163.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T06:36:03.928Z,1478846163.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:04.316Z,1478846164.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:04.334Z,1478846164.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T06:36:04.336Z,1478846164.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:04.713Z,1478846164.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:04.728Z,1478846164.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T06:36:04.729Z,1478846164.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:05.105Z,1478846165.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:05.137Z,1478846165.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T06:36:05.138Z,1478846165.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:05.509Z,1478846165.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:05.548Z,1478846165.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T06:36:05.549Z,1478846165.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:05.905Z,1478846165.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:05.941Z,1478846165.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T06:36:05.942Z,1478846165.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:06.305Z,1478846166.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:06.341Z,1478846166.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T06:36:06.342Z,1478846166.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:06.709Z,1478846166.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:06.746Z,1478846166.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T06:36:06.752Z,1478846166.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:06.972Z,1478846166.972 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T06:36:07.046Z,1478846167.046 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T06:36:07.048Z,1478846167.048 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T06:36:07.049Z,1478846167.049 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T06:36:07.050Z,1478846167.050 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T06:36:07.128Z,1478846167.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:07.185Z,1478846167.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2016-11-11T06:36:07.186Z,1478846167.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:07.506Z,1478846167.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:07.549Z,1478846167.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:07.909Z,1478846167.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:07.962Z,1478846167.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:08.310Z,1478846168.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:08.337Z,1478846168.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:08.706Z,1478846168.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:08.750Z,1478846168.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:09.110Z,1478846169.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:09.148Z,1478846169.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:09.506Z,1478846169.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:09.521Z,1478846169.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:09.909Z,1478846169.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:09.950Z,1478846169.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:10.319Z,1478846170.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:10.406Z,1478846170.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:10.712Z,1478846170.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:10.732Z,1478846170.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:11.110Z,1478846171.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:11.140Z,1478846171.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:11.510Z,1478846171.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:11.544Z,1478846171.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:11.918Z,1478846171.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:11.938Z,1478846171.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:12.306Z,1478846172.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:12.373Z,1478846172.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:12.709Z,1478846172.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:12.742Z,1478846172.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:13.089Z,1478846173.089 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-11T06:36:13.183Z,1478846173.183 [NAL9602](FAULT): received: 
+CSQ:0

OK0, 2, 0, 0, 0

OK
2016-11-11T06:36:13.183Z,1478846173.183 [NAL9602] Data Fault, FailCount= 4
2016-11-11T06:36:13.183Z,1478846173.183 [NAL9602](ERROR): Data Fault
2016-11-11T06:36:13.200Z,1478846173.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:13.261Z,1478846173.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:13.304Z,1478846173.304 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T06:36:13.488Z,1478846173.489 [NAL9602](INFO): Powering down
2016-11-11T06:36:13.508Z,1478846173.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:13.557Z,1478846173.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:13.918Z,1478846173.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:13.986Z,1478846173.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:14.313Z,1478846174.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:14.384Z,1478846174.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:14.404Z,1478846174.404 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T06:36:14.404Z,1478846174.404 [NAL9602] No Fault, FailCount= 4
2016-11-11T06:36:14.705Z,1478846174.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:14.720Z,1478846174.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:15.109Z,1478846175.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:15.147Z,1478846175.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:15.513Z,1478846175.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:15.530Z,1478846175.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:15.918Z,1478846175.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:15.959Z,1478846175.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:16.313Z,1478846176.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:16.330Z,1478846176.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:16.712Z,1478846176.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:16.731Z,1478846176.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:17.106Z,1478846177.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:17.137Z,1478846177.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:17.506Z,1478846177.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:17.555Z,1478846177.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:17.905Z,1478846177.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:17.926Z,1478846177.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:18.312Z,1478846178.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:18.331Z,1478846178.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:18.696Z,1478846178.696 [NAL9602](INFO): Powering up NAL9602
2016-11-11T06:36:18.716Z,1478846178.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:18.767Z,1478846178.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:19.117Z,1478846179.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:19.159Z,1478846179.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:19.512Z,1478846179.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:19.533Z,1478846179.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:19.913Z,1478846179.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:19.932Z,1478846179.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:20.315Z,1478846180.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:20.333Z,1478846180.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:20.716Z,1478846180.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:20.749Z,1478846180.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:21.120Z,1478846181.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:21.153Z,1478846181.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:21.505Z,1478846181.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:21.545Z,1478846181.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:21.911Z,1478846181.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:21.939Z,1478846181.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:22.305Z,1478846182.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:22.342Z,1478846182.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:22.708Z,1478846182.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:22.730Z,1478846182.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:23.115Z,1478846183.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:23.144Z,1478846183.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:23.511Z,1478846183.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:23.536Z,1478846183.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:23.905Z,1478846183.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:23.944Z,1478846183.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:24.305Z,1478846184.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:24.342Z,1478846184.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:24.706Z,1478846184.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:24.744Z,1478846184.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:25.109Z,1478846185.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:25.163Z,1478846185.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:25.505Z,1478846185.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:25.545Z,1478846185.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:25.905Z,1478846185.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:25.943Z,1478846185.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:26.306Z,1478846186.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:26.354Z,1478846186.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:26.707Z,1478846186.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:26.723Z,1478846186.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:27.112Z,1478846187.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:27.145Z,1478846187.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:28.092Z,1478846188.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:28.888Z,1478846188.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:30.533Z,1478846190.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:30.589Z,1478846190.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:30.700Z,1478846190.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:30.733Z,1478846190.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:31.045Z,1478846191.045 [NAL9602](INFO): NAL9602 initialized
2016-11-11T06:36:31.068Z,1478846191.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:31.201Z,1478846191.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:31.457Z,1478846191.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:31.506Z,1478846191.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:31.841Z,1478846191.841 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T06:36:31.841Z,1478846191.841 [NAL9602] Data Fault, FailCount= 5
2016-11-11T06:36:31.841Z,1478846191.841 [NAL9602](ERROR): Data Fault
2016-11-11T06:36:31.858Z,1478846191.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:31.897Z,1478846191.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:31.932Z,1478846191.931 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T06:36:31.932Z,1478846191.932 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-11-11T06:36:32.249Z,1478846192.249 [NAL9602](INFO): Powering down
2016-11-11T06:36:32.266Z,1478846192.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:32.312Z,1478846192.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:32.657Z,1478846192.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:32.695Z,1478846192.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:33.064Z,1478846193.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:33.079Z,1478846193.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:33.472Z,1478846193.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:33.487Z,1478846193.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:33.857Z,1478846193.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:33.881Z,1478846193.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:34.257Z,1478846194.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:34.288Z,1478846194.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:34.657Z,1478846194.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:34.693Z,1478846194.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:35.056Z,1478846195.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:35.077Z,1478846195.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:35.457Z,1478846195.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:35.472Z,1478846195.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:35.864Z,1478846195.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:35.879Z,1478846195.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:36.260Z,1478846196.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:36.275Z,1478846196.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:36.662Z,1478846196.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:36.678Z,1478846196.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:37.068Z,1478846197.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:37.084Z,1478846197.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:37.463Z,1478846197.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:37.478Z,1478846197.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:37.863Z,1478846197.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:37.882Z,1478846197.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:38.264Z,1478846198.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:38.286Z,1478846198.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:38.668Z,1478846198.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:38.682Z,1478846198.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:39.056Z,1478846199.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:39.073Z,1478846199.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:39.464Z,1478846199.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:39.503Z,1478846199.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:39.857Z,1478846199.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:39.881Z,1478846199.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:40.268Z,1478846200.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:40.283Z,1478846200.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:40.664Z,1478846200.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:40.690Z,1478846200.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:41.073Z,1478846201.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:41.090Z,1478846201.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:41.457Z,1478846201.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:41.497Z,1478846201.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:41.857Z,1478846201.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:41.890Z,1478846201.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:42.256Z,1478846202.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:42.323Z,1478846202.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:42.660Z,1478846202.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:42.695Z,1478846202.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:43.089Z,1478846203.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:43.149Z,1478846203.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:43.460Z,1478846203.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:43.475Z,1478846203.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:43.860Z,1478846203.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:43.877Z,1478846203.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:44.265Z,1478846204.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:44.284Z,1478846204.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:44.663Z,1478846204.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:44.690Z,1478846204.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:45.063Z,1478846205.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:45.078Z,1478846205.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:45.456Z,1478846205.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:45.494Z,1478846205.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:45.856Z,1478846205.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:45.893Z,1478846205.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:46.257Z,1478846206.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:46.284Z,1478846206.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:46.661Z,1478846206.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:46.680Z,1478846206.680 [BPC1](ERROR): Failed to receive battery data
2016-11-11T06:36:46.680Z,1478846206.680 [BPC1] Communications Fault, FailCount= 1
2016-11-11T06:36:46.680Z,1478846206.681 [BPC1](ERROR): Communications Fault
2016-11-11T06:36:46.713Z,1478846206.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:46.809Z,1478846206.809 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T06:36:47.064Z,1478846207.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:47.085Z,1478846207.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:47.467Z,1478846207.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:47.484Z,1478846207.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:47.864Z,1478846207.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:47.892Z,1478846207.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:47.922Z,1478846207.922 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:36:47.922Z,1478846207.922 [BPC1] No Fault, FailCount= 1
2016-11-11T06:36:48.256Z,1478846208.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:48.338Z,1478846208.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:48.656Z,1478846208.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:48.713Z,1478846208.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:49.071Z,1478846209.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:49.086Z,1478846209.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:49.465Z,1478846209.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:49.507Z,1478846209.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:49.865Z,1478846209.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:49.891Z,1478846209.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:50.259Z,1478846210.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:50.292Z,1478846210.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:50.667Z,1478846210.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:50.685Z,1478846210.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:51.057Z,1478846211.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:51.097Z,1478846211.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:51.457Z,1478846211.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:51.497Z,1478846211.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:51.857Z,1478846211.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:51.892Z,1478846211.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:52.260Z,1478846212.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:52.288Z,1478846212.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:52.661Z,1478846212.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:52.704Z,1478846212.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:53.069Z,1478846213.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:53.103Z,1478846213.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:53.457Z,1478846213.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:53.489Z,1478846213.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:53.867Z,1478846213.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:53.917Z,1478846213.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:54.263Z,1478846214.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:54.297Z,1478846214.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:54.663Z,1478846214.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:54.684Z,1478846214.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:55.068Z,1478846215.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:55.123Z,1478846215.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:55.465Z,1478846215.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:55.485Z,1478846215.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:55.857Z,1478846215.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:55.925Z,1478846215.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:56.256Z,1478846216.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:56.306Z,1478846216.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:56.658Z,1478846216.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:56.685Z,1478846216.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:57.059Z,1478846217.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:57.126Z,1478846217.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:57.456Z,1478846217.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:57.499Z,1478846217.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:57.856Z,1478846217.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:57.904Z,1478846217.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:58.258Z,1478846218.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:58.275Z,1478846218.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:58.666Z,1478846218.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:58.700Z,1478846218.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:59.063Z,1478846219.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:59.121Z,1478846219.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:59.456Z,1478846219.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:59.489Z,1478846219.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:36:59.859Z,1478846219.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:36:59.904Z,1478846219.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:00.259Z,1478846220.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:00.289Z,1478846220.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:00.663Z,1478846220.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:00.697Z,1478846220.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:01.056Z,1478846221.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:01.066Z,1478846221.066 [PNI_TCM](ERROR): CRC does not match. Expected:0x61678 got:0x418
2016-11-11T06:37:01.093Z,1478846221.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:01.458Z,1478846221.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:01.473Z,1478846221.473 [PNI_TCM](ERROR): CRC does not match. Expected:0x19002 got:0x32768
2016-11-11T06:37:01.497Z,1478846221.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:01.858Z,1478846221.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:01.890Z,1478846221.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:02.256Z,1478846222.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:02.290Z,1478846222.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:02.658Z,1478846222.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:02.692Z,1478846222.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:03.059Z,1478846223.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:03.074Z,1478846223.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:03.468Z,1478846223.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:03.502Z,1478846223.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:03.860Z,1478846223.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:03.898Z,1478846223.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:04.257Z,1478846224.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:04.273Z,1478846224.273 [PNI_TCM](ERROR): CRC does not match. Expected:0x3923 got:0x38172
2016-11-11T06:37:04.301Z,1478846224.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:04.666Z,1478846224.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:04.692Z,1478846224.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:05.062Z,1478846225.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:05.081Z,1478846225.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:05.459Z,1478846225.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:05.485Z,1478846225.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:05.860Z,1478846225.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:05.883Z,1478846225.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:06.266Z,1478846226.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:06.295Z,1478846226.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:06.663Z,1478846226.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:06.739Z,1478846226.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:07.056Z,1478846227.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:07.117Z,1478846227.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:07.462Z,1478846227.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:07.469Z,1478846227.469 [PNI_TCM](ERROR): CRC does not match. Expected:0x34691 got:0x7490
2016-11-11T06:37:07.507Z,1478846227.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:07.859Z,1478846227.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:07.905Z,1478846227.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:08.257Z,1478846228.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:08.281Z,1478846228.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:08.666Z,1478846228.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:08.719Z,1478846228.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:09.065Z,1478846229.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:09.119Z,1478846229.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:09.458Z,1478846229.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:09.491Z,1478846229.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:09.856Z,1478846229.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:09.889Z,1478846229.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:10.258Z,1478846230.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:10.287Z,1478846230.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:10.659Z,1478846230.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:10.700Z,1478846230.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:11.101Z,1478846231.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:11.149Z,1478846231.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:11.456Z,1478846231.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:11.493Z,1478846231.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:11.859Z,1478846231.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:11.892Z,1478846231.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:12.259Z,1478846232.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:12.292Z,1478846232.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:12.657Z,1478846232.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:12.680Z,1478846232.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:13.056Z,1478846233.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:13.152Z,1478846233.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:13.461Z,1478846233.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:13.477Z,1478846233.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:13.867Z,1478846233.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:13.883Z,1478846233.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:14.263Z,1478846234.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:14.278Z,1478846234.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:14.664Z,1478846234.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:14.684Z,1478846234.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:15.059Z,1478846235.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:15.094Z,1478846235.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:15.458Z,1478846235.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:15.493Z,1478846235.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:15.860Z,1478846235.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:15.876Z,1478846235.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:16.261Z,1478846236.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:16.281Z,1478846236.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:16.667Z,1478846236.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:16.682Z,1478846236.682 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:16.682Z,1478846236.682 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2016-11-11T06:37:16.682Z,1478846236.682 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:37:16.748Z,1478846236.748 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:16.748Z,1478846236.748 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2016-11-11T06:37:16.748Z,1478846236.748 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:37:16.788Z,1478846236.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:37:16.788Z,1478846236.788 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:37:17.060Z,1478846237.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:17.123Z,1478846237.123 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:37:17.123Z,1478846237.123 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2016-11-11T06:37:17.128Z,1478846237.128 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:37:17.128Z,1478846237.128 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2016-11-11T06:37:17.464Z,1478846237.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:17.478Z,1478846237.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:37:17.479Z,1478846237.479 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:37:17.479Z,1478846237.479 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:37:17.484Z,1478846237.484 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:37:17.485Z,1478846237.485 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:37:17.485Z,1478846237.485 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:37:17.864Z,1478846237.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:17.882Z,1478846237.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:18.262Z,1478846238.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:18.293Z,1478846238.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:18.668Z,1478846238.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:18.683Z,1478846238.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:19.056Z,1478846239.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:19.092Z,1478846239.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:19.461Z,1478846239.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:19.497Z,1478846239.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:19.859Z,1478846239.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:19.901Z,1478846239.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:20.263Z,1478846240.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:20.332Z,1478846240.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:20.659Z,1478846240.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:20.729Z,1478846240.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:21.056Z,1478846241.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:21.097Z,1478846241.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:21.108Z,1478846241.108 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:21.108Z,1478846241.108 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 17
2016-11-11T06:37:21.108Z,1478846241.108 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:37:21.139Z,1478846241.139 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:37:21.463Z,1478846241.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:21.517Z,1478846241.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:21.578Z,1478846241.578 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:37:21.578Z,1478846241.579 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 17
2016-11-11T06:37:21.865Z,1478846241.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:21.896Z,1478846241.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:21.905Z,1478846241.905 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:37:21.905Z,1478846241.905 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:37:21.906Z,1478846241.906 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:37:22.257Z,1478846242.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:22.305Z,1478846242.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:22.663Z,1478846242.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:22.716Z,1478846242.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:23.061Z,1478846243.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:23.081Z,1478846243.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:23.463Z,1478846243.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:23.479Z,1478846243.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:23.859Z,1478846243.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:23.890Z,1478846243.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:24.267Z,1478846244.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:24.283Z,1478846244.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:24.665Z,1478846244.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:24.680Z,1478846244.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:25.124Z,1478846245.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:25.145Z,1478846245.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:25.457Z,1478846245.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:25.488Z,1478846245.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:25.857Z,1478846245.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:25.889Z,1478846245.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:26.256Z,1478846246.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:26.289Z,1478846246.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:26.657Z,1478846246.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:26.689Z,1478846246.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:27.092Z,1478846247.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:27.126Z,1478846247.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:27.456Z,1478846247.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:27.492Z,1478846247.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:30.901Z,1478846250.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:30.916Z,1478846250.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:31.028Z,1478846251.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:31.058Z,1478846251.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:31.414Z,1478846251.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:31.431Z,1478846251.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:31.813Z,1478846251.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:31.828Z,1478846251.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:32.204Z,1478846252.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:32.237Z,1478846252.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:32.600Z,1478846252.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:32.634Z,1478846252.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:33.001Z,1478846253.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:33.073Z,1478846253.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:33.411Z,1478846253.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:33.428Z,1478846253.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:33.803Z,1478846253.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:33.849Z,1478846253.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:34.200Z,1478846254.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:34.233Z,1478846254.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:34.600Z,1478846254.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:34.657Z,1478846254.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:35.003Z,1478846255.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:35.046Z,1478846255.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:35.410Z,1478846255.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:35.441Z,1478846255.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:35.804Z,1478846255.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:35.842Z,1478846255.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:36.207Z,1478846256.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:36.243Z,1478846256.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:36.608Z,1478846256.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:36.623Z,1478846256.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:37.008Z,1478846257.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:37.023Z,1478846257.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:37.413Z,1478846257.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:37.453Z,1478846257.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:37.805Z,1478846257.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:37.825Z,1478846257.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:38.205Z,1478846258.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:38.220Z,1478846258.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:38.608Z,1478846258.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:38.625Z,1478846258.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:39.006Z,1478846259.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:39.078Z,1478846259.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:39.408Z,1478846259.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:39.415Z,1478846259.415 [PNI_TCM](ERROR): CRC does not match. Expected:0x28792 got:0x43791
2016-11-11T06:37:39.460Z,1478846259.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:39.808Z,1478846259.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:39.837Z,1478846259.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:40.202Z,1478846260.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:40.235Z,1478846260.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:40.600Z,1478846260.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:40.634Z,1478846260.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:41.002Z,1478846261.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:41.089Z,1478846261.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:41.403Z,1478846261.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:41.437Z,1478846261.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:41.807Z,1478846261.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:41.823Z,1478846261.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:42.213Z,1478846262.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:42.228Z,1478846262.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:42.609Z,1478846262.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:42.626Z,1478846262.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:43.003Z,1478846263.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:43.037Z,1478846263.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:43.412Z,1478846263.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:43.437Z,1478846263.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:43.801Z,1478846263.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:43.837Z,1478846263.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:44.215Z,1478846264.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:44.222Z,1478846264.222 [PNI_TCM](ERROR): CRC does not match. Expected:0x10599 got:0x49152
2016-11-11T06:37:44.249Z,1478846264.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:44.605Z,1478846264.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:44.633Z,1478846264.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:45.004Z,1478846265.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:45.025Z,1478846265.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:45.406Z,1478846265.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:45.422Z,1478846265.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:45.811Z,1478846265.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:45.869Z,1478846265.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:46.201Z,1478846266.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:46.259Z,1478846266.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:46.600Z,1478846266.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:46.628Z,1478846266.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:47.002Z,1478846267.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:47.025Z,1478846267.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:47.407Z,1478846267.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:47.446Z,1478846267.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:47.806Z,1478846267.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:47.822Z,1478846267.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:48.204Z,1478846268.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:48.250Z,1478846268.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:48.608Z,1478846268.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:48.706Z,1478846268.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:49.007Z,1478846269.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:49.030Z,1478846269.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:49.406Z,1478846269.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:49.425Z,1478846269.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:49.808Z,1478846269.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:49.824Z,1478846269.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:50.211Z,1478846270.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:50.226Z,1478846270.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:50.609Z,1478846270.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:50.629Z,1478846270.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:51.003Z,1478846271.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:51.034Z,1478846271.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:51.407Z,1478846271.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:51.422Z,1478846271.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:51.809Z,1478846271.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:51.824Z,1478846271.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:52.209Z,1478846272.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:52.224Z,1478846272.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:52.607Z,1478846272.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:52.622Z,1478846272.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:53.022Z,1478846273.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:53.090Z,1478846273.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:53.403Z,1478846273.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:53.437Z,1478846273.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:53.801Z,1478846273.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:53.826Z,1478846273.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:54.200Z,1478846274.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:54.234Z,1478846274.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:54.608Z,1478846274.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:54.630Z,1478846274.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:55.026Z,1478846275.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:55.081Z,1478846275.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:55.400Z,1478846275.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:55.436Z,1478846275.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:55.801Z,1478846275.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:55.837Z,1478846275.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:56.201Z,1478846276.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:56.237Z,1478846276.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:56.602Z,1478846276.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:56.678Z,1478846276.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:57.001Z,1478846277.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:57.037Z,1478846277.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:57.405Z,1478846277.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:57.432Z,1478846277.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:57.808Z,1478846277.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:57.823Z,1478846277.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:58.206Z,1478846278.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:58.234Z,1478846278.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:58.608Z,1478846278.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:58.624Z,1478846278.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:59.009Z,1478846279.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:59.073Z,1478846279.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:59.403Z,1478846279.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:59.435Z,1478846279.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:37:59.808Z,1478846279.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:37:59.865Z,1478846279.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:00.200Z,1478846280.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:00.230Z,1478846280.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:00.608Z,1478846280.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:00.679Z,1478846280.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:01.001Z,1478846281.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:01.049Z,1478846281.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:01.400Z,1478846281.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:01.436Z,1478846281.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:01.801Z,1478846281.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:01.853Z,1478846281.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:02.200Z,1478846282.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:02.253Z,1478846282.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:02.600Z,1478846282.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:02.658Z,1478846282.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:03.009Z,1478846283.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:03.024Z,1478846283.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:03.103Z,1478846283.103 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T06:38:03.103Z,1478846283.103 [Rowe_600LCM] Communications Fault, FailCount= 4
2016-11-11T06:38:03.104Z,1478846283.103 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T06:38:03.408Z,1478846283.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:03.423Z,1478846283.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T06:38:03.424Z,1478846283.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:03.491Z,1478846283.491 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T06:38:03.508Z,1478846283.508 [Rowe_600LCM](INFO): Powering down
2016-11-11T06:38:03.810Z,1478846283.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:03.837Z,1478846283.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T06:38:03.838Z,1478846283.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:04.203Z,1478846284.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:04.222Z,1478846284.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:38:04.223Z,1478846284.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:04.609Z,1478846284.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:04.637Z,1478846284.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:38:04.638Z,1478846284.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:04.728Z,1478846284.727 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T06:38:04.728Z,1478846284.728 [Rowe_600LCM] No Fault, FailCount= 4
2016-11-11T06:38:05.011Z,1478846285.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:05.062Z,1478846285.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:38:05.063Z,1478846285.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:05.127Z,1478846285.127 [Rowe_600LCM](INFO): Initializing
2016-11-11T06:38:05.128Z,1478846285.128 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T06:38:05.128Z,1478846285.128 [Rowe_600LCM](INFO): LCM OK
2016-11-11T06:38:05.128Z,1478846285.128 [Rowe_600LCM](INFO): Powering up
2016-11-11T06:38:05.404Z,1478846285.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:05.453Z,1478846285.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T06:38:05.454Z,1478846285.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:05.807Z,1478846285.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:05.863Z,1478846285.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T06:38:05.865Z,1478846285.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:06.211Z,1478846286.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:06.262Z,1478846286.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T06:38:06.263Z,1478846286.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:06.610Z,1478846286.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:06.629Z,1478846286.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T06:38:06.630Z,1478846286.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:07.014Z,1478846287.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:07.033Z,1478846287.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T06:38:07.034Z,1478846287.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:07.402Z,1478846287.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:07.441Z,1478846287.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T06:38:07.442Z,1478846287.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:07.802Z,1478846287.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:07.877Z,1478846287.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2016-11-11T06:38:07.878Z,1478846287.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:08.207Z,1478846288.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:08.246Z,1478846288.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T06:38:08.256Z,1478846288.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:08.609Z,1478846288.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:08.630Z,1478846288.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T06:38:08.631Z,1478846288.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:09.009Z,1478846289.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:09.038Z,1478846289.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T06:38:09.039Z,1478846289.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:09.362Z,1478846289.362 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T06:38:09.422Z,1478846289.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:09.456Z,1478846289.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T06:38:09.458Z,1478846289.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:09.570Z,1478846289.570 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T06:38:09.572Z,1478846289.572 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T06:38:09.573Z,1478846289.573 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T06:38:09.574Z,1478846289.574 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T06:38:09.803Z,1478846289.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:09.853Z,1478846289.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T06:38:09.854Z,1478846289.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:10.206Z,1478846290.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:10.259Z,1478846290.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:10.605Z,1478846290.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:10.720Z,1478846290.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:11.010Z,1478846291.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:11.054Z,1478846291.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:11.411Z,1478846291.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:11.433Z,1478846291.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:11.809Z,1478846291.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:11.834Z,1478846291.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:12.202Z,1478846292.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:12.241Z,1478846292.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:12.600Z,1478846292.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:12.636Z,1478846292.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:13.001Z,1478846293.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:13.058Z,1478846293.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:13.400Z,1478846293.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:13.444Z,1478846293.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:13.800Z,1478846293.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:13.836Z,1478846293.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:14.201Z,1478846294.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:14.249Z,1478846294.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:14.600Z,1478846294.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:14.621Z,1478846294.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:15.001Z,1478846295.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:15.057Z,1478846295.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:15.412Z,1478846295.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:15.457Z,1478846295.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:15.812Z,1478846295.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:15.844Z,1478846295.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:16.207Z,1478846296.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:16.229Z,1478846296.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:16.607Z,1478846296.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:16.623Z,1478846296.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:17.015Z,1478846297.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:17.030Z,1478846297.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:17.408Z,1478846297.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:17.429Z,1478846297.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:17.824Z,1478846297.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:17.840Z,1478846297.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:18.208Z,1478846298.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:18.231Z,1478846298.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:18.601Z,1478846298.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:18.628Z,1478846298.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:19.001Z,1478846299.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:19.028Z,1478846299.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:19.400Z,1478846299.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:19.443Z,1478846299.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:19.809Z,1478846299.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:19.840Z,1478846299.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:20.200Z,1478846300.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:20.237Z,1478846300.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:20.600Z,1478846300.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:20.621Z,1478846300.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:21.016Z,1478846301.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:21.042Z,1478846301.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:21.400Z,1478846301.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:21.421Z,1478846301.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:21.813Z,1478846301.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:21.854Z,1478846301.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:22.208Z,1478846302.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:22.223Z,1478846302.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:22.608Z,1478846302.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:22.631Z,1478846302.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:23.000Z,1478846303.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:23.029Z,1478846303.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:23.400Z,1478846303.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:23.433Z,1478846303.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:23.817Z,1478846303.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:23.842Z,1478846303.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:24.208Z,1478846304.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:24.245Z,1478846304.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:24.606Z,1478846304.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:24.637Z,1478846304.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:24.905Z,1478846304.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:25.005Z,1478846305.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:25.053Z,1478846305.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:25.406Z,1478846305.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:25.425Z,1478846305.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:25.700Z,1478846305.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:25.812Z,1478846305.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:25.869Z,1478846305.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:26.209Z,1478846306.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:26.261Z,1478846306.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:26.610Z,1478846306.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:26.637Z,1478846306.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:27.009Z,1478846307.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:27.077Z,1478846307.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:27.401Z,1478846307.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:27.444Z,1478846307.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:27.803Z,1478846307.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:27.845Z,1478846307.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:34.786Z,1478846314.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:34.834Z,1478846314.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:34.853Z,1478846314.853 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T06:38:34.853Z,1478846314.853 [NAL9602] No Fault, FailCount= 5
2016-11-11T06:38:34.913Z,1478846314.913 [NAL9602](INFO): Powering up NAL9602
2016-11-11T06:38:34.945Z,1478846314.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:34.965Z,1478846314.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:35.297Z,1478846315.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:35.357Z,1478846315.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:35.692Z,1478846315.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:35.741Z,1478846315.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:36.086Z,1478846316.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:36.118Z,1478846316.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:36.491Z,1478846316.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:36.521Z,1478846316.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:36.892Z,1478846316.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:36.910Z,1478846316.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:37.295Z,1478846317.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:37.313Z,1478846317.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:37.701Z,1478846317.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:37.725Z,1478846317.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:38.093Z,1478846318.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:38.137Z,1478846318.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:38.485Z,1478846318.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:38.525Z,1478846318.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:38.885Z,1478846318.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:38.927Z,1478846318.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:39.287Z,1478846319.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:39.315Z,1478846319.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:39.685Z,1478846319.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:39.728Z,1478846319.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:40.106Z,1478846320.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:40.130Z,1478846320.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:40.489Z,1478846320.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:40.531Z,1478846320.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:40.886Z,1478846320.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:40.921Z,1478846320.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:41.285Z,1478846321.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:41.313Z,1478846321.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:41.685Z,1478846321.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:41.714Z,1478846321.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:42.103Z,1478846322.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:42.118Z,1478846322.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:42.486Z,1478846322.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:42.511Z,1478846322.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:42.885Z,1478846322.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:42.928Z,1478846322.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:43.285Z,1478846323.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:43.317Z,1478846323.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:43.706Z,1478846323.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:43.721Z,1478846323.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:44.092Z,1478846324.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:44.125Z,1478846324.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:44.485Z,1478846324.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:44.525Z,1478846324.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:44.885Z,1478846324.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:44.921Z,1478846324.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:45.287Z,1478846325.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:45.327Z,1478846325.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:45.716Z,1478846325.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:45.732Z,1478846325.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:46.069Z,1478846326.069 [NAL9602](INFO): NAL9602 initialized
2016-11-11T06:38:46.086Z,1478846326.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:46.157Z,1478846326.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:46.485Z,1478846326.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:46.529Z,1478846326.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:46.904Z,1478846326.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:46.932Z,1478846326.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:47.300Z,1478846327.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:47.315Z,1478846327.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:47.714Z,1478846327.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:47.789Z,1478846327.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:48.096Z,1478846328.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:48.112Z,1478846328.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:48.490Z,1478846328.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:48.539Z,1478846328.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:48.893Z,1478846328.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:48.917Z,1478846328.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:49.307Z,1478846329.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:49.353Z,1478846329.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:49.709Z,1478846329.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:49.765Z,1478846329.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:50.104Z,1478846330.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:50.119Z,1478846330.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:50.506Z,1478846330.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:50.522Z,1478846330.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:50.894Z,1478846330.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:50.919Z,1478846330.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:51.287Z,1478846331.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:51.322Z,1478846331.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:51.706Z,1478846331.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:51.734Z,1478846331.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:52.088Z,1478846332.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:52.125Z,1478846332.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:52.485Z,1478846332.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:52.521Z,1478846332.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:52.889Z,1478846332.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:52.904Z,1478846332.904 [PNI_TCM](ERROR): CRC does not match. Expected:0x65305 got:0x30398
2016-11-11T06:38:52.922Z,1478846332.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:53.287Z,1478846333.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:53.321Z,1478846333.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:53.686Z,1478846333.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:53.726Z,1478846333.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:54.101Z,1478846334.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:54.133Z,1478846334.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:54.497Z,1478846334.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:54.529Z,1478846334.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:54.888Z,1478846334.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:54.917Z,1478846334.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:55.294Z,1478846335.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:55.313Z,1478846335.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:55.700Z,1478846335.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:55.721Z,1478846335.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:56.087Z,1478846336.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:56.121Z,1478846336.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:56.509Z,1478846336.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:56.524Z,1478846336.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:56.911Z,1478846336.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:56.926Z,1478846336.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:57.287Z,1478846337.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:57.314Z,1478846337.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:57.688Z,1478846337.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:57.721Z,1478846337.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:58.086Z,1478846338.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:58.118Z,1478846338.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:58.484Z,1478846338.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:58.517Z,1478846338.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:58.888Z,1478846338.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:58.923Z,1478846338.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:59.288Z,1478846339.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:59.322Z,1478846339.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:38:59.686Z,1478846339.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:38:59.717Z,1478846339.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:00.085Z,1478846340.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:00.141Z,1478846340.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:00.491Z,1478846340.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:00.525Z,1478846340.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:00.887Z,1478846340.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:00.925Z,1478846340.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:01.290Z,1478846341.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:01.321Z,1478846341.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:01.690Z,1478846341.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:01.717Z,1478846341.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:02.095Z,1478846342.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:02.146Z,1478846342.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:02.495Z,1478846342.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:02.517Z,1478846342.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:02.885Z,1478846342.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:02.943Z,1478846342.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:03.297Z,1478846343.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:03.317Z,1478846343.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:03.687Z,1478846343.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:03.748Z,1478846343.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:04.086Z,1478846344.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:04.143Z,1478846344.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:04.485Z,1478846344.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:04.519Z,1478846344.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:04.912Z,1478846344.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:04.928Z,1478846344.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:05.299Z,1478846345.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:05.326Z,1478846345.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:05.686Z,1478846345.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:05.710Z,1478846345.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:06.086Z,1478846346.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:06.121Z,1478846346.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:06.485Z,1478846346.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:06.525Z,1478846346.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:06.888Z,1478846346.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:06.903Z,1478846346.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:07.294Z,1478846347.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:07.309Z,1478846347.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:07.689Z,1478846347.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:07.709Z,1478846347.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:08.098Z,1478846348.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:08.113Z,1478846348.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:08.496Z,1478846348.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:08.512Z,1478846348.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:08.897Z,1478846348.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:08.912Z,1478846348.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:09.294Z,1478846349.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:09.319Z,1478846349.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:09.686Z,1478846349.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:09.706Z,1478846349.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:10.088Z,1478846350.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:10.109Z,1478846350.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:10.490Z,1478846350.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:10.505Z,1478846350.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:10.890Z,1478846350.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:10.906Z,1478846350.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:11.285Z,1478846351.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:11.309Z,1478846351.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:11.686Z,1478846351.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:11.709Z,1478846351.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:12.088Z,1478846352.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:12.104Z,1478846352.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:12.489Z,1478846352.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:12.510Z,1478846352.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:12.889Z,1478846352.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:12.915Z,1478846352.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:13.285Z,1478846353.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:13.305Z,1478846353.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:13.704Z,1478846353.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:13.720Z,1478846353.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:14.104Z,1478846354.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:14.133Z,1478846354.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:14.486Z,1478846354.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:14.517Z,1478846354.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:14.886Z,1478846354.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:14.934Z,1478846354.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:15.285Z,1478846355.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:15.305Z,1478846355.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:15.685Z,1478846355.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:15.705Z,1478846355.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:16.088Z,1478846356.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:16.137Z,1478846356.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:16.492Z,1478846356.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:16.507Z,1478846356.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:16.893Z,1478846356.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:16.909Z,1478846356.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:17.296Z,1478846357.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:17.356Z,1478846357.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:17.701Z,1478846357.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:17.716Z,1478846357.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:18.085Z,1478846358.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:18.133Z,1478846358.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:18.485Z,1478846358.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:18.533Z,1478846358.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:18.885Z,1478846358.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:18.920Z,1478846358.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:19.285Z,1478846359.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:19.322Z,1478846359.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:19.707Z,1478846359.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:19.723Z,1478846359.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:20.085Z,1478846360.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:20.125Z,1478846360.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:20.492Z,1478846360.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:20.508Z,1478846360.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:20.894Z,1478846360.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:20.909Z,1478846360.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:21.291Z,1478846361.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:21.313Z,1478846361.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:21.692Z,1478846361.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:21.712Z,1478846361.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:22.099Z,1478846362.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:22.115Z,1478846362.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:22.506Z,1478846362.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:22.525Z,1478846362.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:22.908Z,1478846362.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:22.923Z,1478846362.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:23.285Z,1478846363.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:23.317Z,1478846363.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:23.685Z,1478846363.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:23.719Z,1478846363.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:24.085Z,1478846364.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:24.121Z,1478846364.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:24.490Z,1478846364.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:24.515Z,1478846364.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:24.885Z,1478846364.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:24.916Z,1478846364.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:25.285Z,1478846365.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:25.313Z,1478846365.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:25.686Z,1478846365.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:25.729Z,1478846365.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:26.093Z,1478846366.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:26.125Z,1478846366.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:26.500Z,1478846366.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:26.537Z,1478846366.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:26.896Z,1478846366.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:26.928Z,1478846366.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:27.289Z,1478846367.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:27.309Z,1478846367.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:27.697Z,1478846367.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:27.728Z,1478846367.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:28.098Z,1478846368.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:28.113Z,1478846368.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:31.690Z,1478846371.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:31.785Z,1478846371.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:31.892Z,1478846371.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:31.944Z,1478846371.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:32.253Z,1478846372.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:32.305Z,1478846372.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:32.654Z,1478846372.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:32.669Z,1478846372.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:33.048Z,1478846373.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:33.101Z,1478846373.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:33.455Z,1478846373.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:33.509Z,1478846373.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:33.845Z,1478846373.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:33.880Z,1478846373.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:34.250Z,1478846374.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:34.282Z,1478846374.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:34.645Z,1478846374.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:34.673Z,1478846374.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:35.046Z,1478846375.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:35.061Z,1478846375.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:35.460Z,1478846375.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:35.491Z,1478846375.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:35.891Z,1478846375.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:35.932Z,1478846375.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:36.254Z,1478846376.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:36.268Z,1478846376.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:36.648Z,1478846376.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:36.678Z,1478846376.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:37.052Z,1478846377.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:37.073Z,1478846377.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:37.453Z,1478846377.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:37.473Z,1478846377.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:37.871Z,1478846377.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:37.920Z,1478846377.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:38.250Z,1478846378.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:38.275Z,1478846378.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:38.645Z,1478846378.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:38.677Z,1478846378.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:39.045Z,1478846379.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:39.078Z,1478846379.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:39.467Z,1478846379.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:39.546Z,1478846379.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:39.865Z,1478846379.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:39.880Z,1478846379.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:40.271Z,1478846380.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:40.286Z,1478846380.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:40.668Z,1478846380.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:40.696Z,1478846380.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:41.054Z,1478846381.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:41.093Z,1478846381.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:41.453Z,1478846381.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:41.518Z,1478846381.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:41.853Z,1478846381.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:41.874Z,1478846381.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:42.245Z,1478846382.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:42.281Z,1478846382.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:42.645Z,1478846382.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:42.671Z,1478846382.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:43.056Z,1478846383.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:43.077Z,1478846383.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:43.447Z,1478846383.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:43.546Z,1478846383.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:43.845Z,1478846383.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:43.865Z,1478846383.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:44.260Z,1478846384.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:44.292Z,1478846384.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:44.664Z,1478846384.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:44.696Z,1478846384.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:45.053Z,1478846385.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:45.073Z,1478846385.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:45.462Z,1478846385.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:45.562Z,1478846385.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:45.845Z,1478846385.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:45.905Z,1478846385.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:46.245Z,1478846386.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:46.265Z,1478846386.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:46.653Z,1478846386.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:46.706Z,1478846386.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:47.049Z,1478846387.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:47.069Z,1478846387.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:47.457Z,1478846387.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:47.541Z,1478846387.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:47.861Z,1478846387.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:47.915Z,1478846387.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:48.268Z,1478846388.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:48.283Z,1478846388.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:48.667Z,1478846388.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:48.683Z,1478846388.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:49.068Z,1478846389.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:49.094Z,1478846389.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:49.468Z,1478846389.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:49.489Z,1478846389.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:49.858Z,1478846389.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:49.895Z,1478846389.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:50.245Z,1478846390.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:50.285Z,1478846390.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:50.336Z,1478846390.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:50.645Z,1478846390.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:50.665Z,1478846390.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:51.046Z,1478846391.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:51.061Z,1478846391.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:51.132Z,1478846391.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:51.449Z,1478846391.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:51.465Z,1478846391.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:51.859Z,1478846391.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:51.898Z,1478846391.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:52.257Z,1478846392.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:52.277Z,1478846392.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:52.649Z,1478846392.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:52.670Z,1478846392.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:53.063Z,1478846393.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:53.085Z,1478846393.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:53.481Z,1478846393.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:53.532Z,1478846393.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:53.872Z,1478846393.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:53.887Z,1478846393.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:54.268Z,1478846394.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:54.289Z,1478846394.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:54.646Z,1478846394.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:54.681Z,1478846394.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:55.045Z,1478846395.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:55.076Z,1478846395.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:55.454Z,1478846395.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:55.524Z,1478846395.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:55.846Z,1478846395.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:55.873Z,1478846395.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:56.256Z,1478846396.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:56.272Z,1478846396.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:56.654Z,1478846396.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:56.673Z,1478846396.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:57.048Z,1478846397.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:57.071Z,1478846397.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:57.494Z,1478846397.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:57.532Z,1478846397.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:57.846Z,1478846397.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:57.877Z,1478846397.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:58.267Z,1478846398.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:58.282Z,1478846398.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:58.670Z,1478846398.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:58.693Z,1478846398.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:59.046Z,1478846399.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:59.081Z,1478846399.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:59.491Z,1478846399.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:59.533Z,1478846399.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:39:59.853Z,1478846399.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:39:59.917Z,1478846399.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:00.258Z,1478846400.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:00.273Z,1478846400.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:00.653Z,1478846400.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:00.673Z,1478846400.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:01.051Z,1478846401.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:01.104Z,1478846401.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:01.453Z,1478846401.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:01.473Z,1478846401.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:01.845Z,1478846401.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:01.910Z,1478846401.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:02.267Z,1478846402.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:02.321Z,1478846402.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:02.669Z,1478846402.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:02.683Z,1478846402.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:03.049Z,1478846403.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:03.085Z,1478846403.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:03.449Z,1478846403.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:03.486Z,1478846403.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:03.853Z,1478846403.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:03.886Z,1478846403.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:04.245Z,1478846404.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:04.265Z,1478846404.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:04.308Z,1478846404.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:04.650Z,1478846404.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:04.665Z,1478846404.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:05.054Z,1478846405.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:05.068Z,1478846405.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:05.104Z,1478846405.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:05.452Z,1478846405.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:05.468Z,1478846405.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:05.864Z,1478846405.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:05.909Z,1478846405.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:06.256Z,1478846406.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:06.271Z,1478846406.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:06.648Z,1478846406.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:06.677Z,1478846406.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:07.049Z,1478846407.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:07.081Z,1478846407.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:07.471Z,1478846407.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:07.518Z,1478846407.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:07.845Z,1478846407.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:07.866Z,1478846407.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:08.248Z,1478846408.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:08.273Z,1478846408.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:08.654Z,1478846408.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:08.669Z,1478846408.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:09.052Z,1478846409.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:09.069Z,1478846409.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:09.481Z,1478846409.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:09.520Z,1478846409.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:09.845Z,1478846409.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:09.877Z,1478846409.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:10.245Z,1478846410.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:10.277Z,1478846410.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:10.669Z,1478846410.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:10.690Z,1478846410.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:11.068Z,1478846411.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:11.083Z,1478846411.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:11.455Z,1478846411.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:11.498Z,1478846411.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:11.853Z,1478846411.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:11.889Z,1478846411.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:12.245Z,1478846412.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:12.265Z,1478846412.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:12.650Z,1478846412.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:12.670Z,1478846412.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:13.056Z,1478846413.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:13.071Z,1478846413.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:13.477Z,1478846413.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:13.522Z,1478846413.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:13.845Z,1478846413.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:13.871Z,1478846413.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:14.260Z,1478846414.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:14.321Z,1478846414.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:14.645Z,1478846414.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:14.709Z,1478846414.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:15.060Z,1478846415.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:15.091Z,1478846415.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:15.477Z,1478846415.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:15.551Z,1478846415.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:15.852Z,1478846415.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:15.897Z,1478846415.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:16.248Z,1478846416.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:16.271Z,1478846416.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:16.656Z,1478846416.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:16.711Z,1478846416.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:17.053Z,1478846417.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:17.111Z,1478846417.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:17.448Z,1478846417.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:17.480Z,1478846417.480 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:17.480Z,1478846417.480 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2016-11-11T06:40:17.480Z,1478846417.480 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:40:17.487Z,1478846417.487 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:17.487Z,1478846417.487 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2016-11-11T06:40:17.487Z,1478846417.487 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:40:17.518Z,1478846417.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:40:17.519Z,1478846417.519 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:40:17.849Z,1478846417.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:17.924Z,1478846417.924 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:40:17.924Z,1478846417.924 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2016-11-11T06:40:17.925Z,1478846417.925 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:40:17.925Z,1478846417.925 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2016-11-11T06:40:18.262Z,1478846418.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:18.276Z,1478846418.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:40:18.276Z,1478846418.276 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:40:18.277Z,1478846418.277 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:40:18.281Z,1478846418.281 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:40:18.282Z,1478846418.282 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:40:18.282Z,1478846418.282 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:40:18.645Z,1478846418.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:18.683Z,1478846418.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:19.049Z,1478846419.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:19.081Z,1478846419.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:19.460Z,1478846419.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:19.495Z,1478846419.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:19.856Z,1478846419.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:19.882Z,1478846419.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:20.257Z,1478846420.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:20.287Z,1478846420.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:20.657Z,1478846420.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:20.682Z,1478846420.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:21.049Z,1478846421.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:21.069Z,1478846421.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:21.452Z,1478846421.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:21.494Z,1478846421.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:21.845Z,1478846421.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:21.860Z,1478846421.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:22.248Z,1478846422.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:22.273Z,1478846422.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:22.288Z,1478846422.288 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:22.288Z,1478846422.288 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 18
2016-11-11T06:40:22.289Z,1478846422.289 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:40:22.315Z,1478846422.316 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:40:22.659Z,1478846422.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:22.678Z,1478846422.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:22.709Z,1478846422.709 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:40:22.710Z,1478846422.710 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 18
2016-11-11T06:40:23.054Z,1478846423.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:23.068Z,1478846423.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:23.074Z,1478846423.074 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:40:23.074Z,1478846423.074 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:40:23.075Z,1478846423.075 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:40:23.464Z,1478846423.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:23.504Z,1478846423.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:23.869Z,1478846423.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:23.890Z,1478846423.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:24.256Z,1478846424.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:24.285Z,1478846424.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:24.645Z,1478846424.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:24.685Z,1478846424.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:25.049Z,1478846425.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:25.082Z,1478846425.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:25.474Z,1478846425.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:25.496Z,1478846425.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:25.848Z,1478846425.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:25.873Z,1478846425.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:26.255Z,1478846426.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:26.271Z,1478846426.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:26.654Z,1478846426.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:26.669Z,1478846426.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:26.677Z,1478846426.677 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T06:35:26.5Z
2016-11-11T06:40:26.678Z,1478846426.678 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T06:40:26.678Z,1478846426.678 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T06:40:27.057Z,1478846427.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:27.072Z,1478846427.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:27.943Z,1478846427.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:27.969Z,1478846427.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:28.070Z,1478846428.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:28.113Z,1478846428.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:31.569Z,1478846431.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:31.649Z,1478846431.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:31.695Z,1478846431.695 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20161111T044527/Courier0044.lzma
2016-11-11T06:40:31.805Z,1478846431.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:31.856Z,1478846431.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:32.132Z,1478846432.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:32.185Z,1478846432.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:32.498Z,1478846432.498 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0044.lzma.bak
2016-11-11T06:40:32.498Z,1478846432.498 [DataOverHttps](INFO): SBD MOMSN=4555109
2016-11-11T06:40:32.559Z,1478846432.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:32.574Z,1478846432.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:33.856Z,1478846433.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:33.927Z,1478846433.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:34.018Z,1478846434.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:34.062Z,1478846434.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:37.566Z,1478846437.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:37.584Z,1478846437.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:37.693Z,1478846437.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:37.729Z,1478846437.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:38.072Z,1478846438.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:38.087Z,1478846438.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:38.461Z,1478846438.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:38.476Z,1478846438.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:38.879Z,1478846438.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:38.902Z,1478846438.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:39.265Z,1478846439.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:39.285Z,1478846439.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:42.620Z,1478846442.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:42.641Z,1478846442.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:42.729Z,1478846442.729 [DataOverHttps](INFO): Sending 329 bytes from file Logs/20161111T044527/Express0045.lzma
2016-11-11T06:40:42.774Z,1478846442.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:42.804Z,1478846442.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:43.129Z,1478846443.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:43.153Z,1478846443.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:43.505Z,1478846443.505 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0045.lzma.bak
2016-11-11T06:40:43.505Z,1478846443.505 [DataOverHttps](INFO): SBD MOMSN=4555112
2016-11-11T06:40:43.544Z,1478846443.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:43.568Z,1478846443.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:44.680Z,1478846444.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:44.774Z,1478846444.774 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T06:40:44.806Z,1478846444.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:44.822Z,1478846444.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:44.847Z,1478846444.847 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T06:40:44.847Z,1478846444.847 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T06:40:44.847Z,1478846444.847 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T06:40:44.925Z,1478846444.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:44.961Z,1478846444.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:45.477Z,1478846445.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:48.592Z,1478846448.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:48.671Z,1478846448.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:48.765Z,1478846448.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:48.797Z,1478846448.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:49.148Z,1478846449.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:49.204Z,1478846449.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:49.553Z,1478846449.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:49.573Z,1478846449.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:49.928Z,1478846449.928 [NAL9602](INFO): Powering down
2016-11-11T06:40:49.947Z,1478846449.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:50.013Z,1478846450.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:50.346Z,1478846450.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:50.401Z,1478846450.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:50.745Z,1478846450.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:50.818Z,1478846450.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:51.153Z,1478846451.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:51.185Z,1478846451.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:51.557Z,1478846451.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:51.601Z,1478846451.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:51.946Z,1478846451.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:51.965Z,1478846451.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:52.356Z,1478846452.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:52.378Z,1478846452.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:52.752Z,1478846452.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:52.768Z,1478846452.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:53.153Z,1478846453.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:53.173Z,1478846453.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:53.545Z,1478846453.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:53.572Z,1478846453.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:53.957Z,1478846453.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:53.982Z,1478846453.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:54.345Z,1478846454.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:54.385Z,1478846454.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:54.745Z,1478846454.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:54.760Z,1478846454.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:55.145Z,1478846455.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:55.165Z,1478846455.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:55.550Z,1478846455.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:55.565Z,1478846455.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:55.956Z,1478846455.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:55.971Z,1478846455.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:56.352Z,1478846456.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:56.367Z,1478846456.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:56.752Z,1478846456.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:56.767Z,1478846456.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:57.152Z,1478846457.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:57.167Z,1478846457.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:57.553Z,1478846457.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:57.573Z,1478846457.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:57.957Z,1478846457.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:57.978Z,1478846457.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:58.349Z,1478846458.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:58.383Z,1478846458.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:58.749Z,1478846458.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:58.783Z,1478846458.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:59.145Z,1478846459.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:59.178Z,1478846459.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:59.545Z,1478846459.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:59.577Z,1478846459.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:40:59.945Z,1478846459.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:40:59.970Z,1478846459.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:00.345Z,1478846460.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:00.377Z,1478846460.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:00.749Z,1478846460.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:00.777Z,1478846460.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:01.145Z,1478846461.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:01.183Z,1478846461.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:01.545Z,1478846461.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:01.565Z,1478846461.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:01.956Z,1478846461.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:01.997Z,1478846461.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:02.348Z,1478846462.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:02.433Z,1478846462.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:02.752Z,1478846462.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:02.773Z,1478846462.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:03.152Z,1478846463.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:03.208Z,1478846463.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:03.552Z,1478846463.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:03.573Z,1478846463.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:03.965Z,1478846463.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:04.013Z,1478846464.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:04.350Z,1478846464.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:04.394Z,1478846464.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:04.745Z,1478846464.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:04.773Z,1478846464.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:05.152Z,1478846465.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:05.173Z,1478846465.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:05.557Z,1478846465.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:05.572Z,1478846465.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:05.952Z,1478846465.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:05.973Z,1478846465.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:06.345Z,1478846466.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:06.370Z,1478846466.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:06.746Z,1478846466.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:06.775Z,1478846466.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:07.145Z,1478846467.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:07.170Z,1478846467.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:07.553Z,1478846467.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:07.618Z,1478846467.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:07.950Z,1478846467.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:07.965Z,1478846467.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:08.350Z,1478846468.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:08.373Z,1478846468.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:08.750Z,1478846468.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:08.765Z,1478846468.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:09.153Z,1478846469.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:09.173Z,1478846469.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:09.545Z,1478846469.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:09.570Z,1478846469.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:09.945Z,1478846469.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:09.979Z,1478846469.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:10.345Z,1478846470.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:10.377Z,1478846470.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:10.745Z,1478846470.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:10.778Z,1478846470.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:11.146Z,1478846471.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:11.173Z,1478846471.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:11.561Z,1478846471.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:11.583Z,1478846471.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:11.945Z,1478846471.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:12.017Z,1478846472.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:12.345Z,1478846472.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:12.370Z,1478846472.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:12.625Z,1478846472.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:12.745Z,1478846472.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:12.788Z,1478846472.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:13.145Z,1478846473.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:13.176Z,1478846473.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:13.420Z,1478846473.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:13.545Z,1478846473.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:13.577Z,1478846473.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:13.945Z,1478846473.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:13.977Z,1478846473.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:14.345Z,1478846474.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:14.373Z,1478846474.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:14.749Z,1478846474.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:14.783Z,1478846474.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:15.145Z,1478846475.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:15.172Z,1478846475.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:15.553Z,1478846475.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:15.587Z,1478846475.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:15.957Z,1478846475.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:15.985Z,1478846475.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:16.350Z,1478846476.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:16.433Z,1478846476.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:16.745Z,1478846476.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:16.782Z,1478846476.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:17.146Z,1478846477.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:17.253Z,1478846477.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:17.545Z,1478846477.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:17.573Z,1478846477.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:17.945Z,1478846477.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:18.001Z,1478846478.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:18.345Z,1478846478.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:18.405Z,1478846478.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:18.745Z,1478846478.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:18.760Z,1478846478.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:19.145Z,1478846479.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:19.165Z,1478846479.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:19.553Z,1478846479.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:19.596Z,1478846479.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:19.946Z,1478846479.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:20.014Z,1478846480.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:20.350Z,1478846480.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:20.365Z,1478846480.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:20.753Z,1478846480.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:20.811Z,1478846480.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:21.152Z,1478846481.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:21.168Z,1478846481.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:21.550Z,1478846481.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:21.565Z,1478846481.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:21.951Z,1478846481.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:21.993Z,1478846481.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:22.352Z,1478846482.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:22.368Z,1478846482.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:22.751Z,1478846482.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:22.773Z,1478846482.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:23.148Z,1478846483.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:23.170Z,1478846483.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:23.552Z,1478846483.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:23.614Z,1478846483.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:23.957Z,1478846483.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:24.033Z,1478846484.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:24.353Z,1478846484.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:24.369Z,1478846484.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:24.753Z,1478846484.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:24.768Z,1478846484.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:25.152Z,1478846485.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:25.173Z,1478846485.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:25.561Z,1478846485.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:25.597Z,1478846485.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:25.953Z,1478846485.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:25.993Z,1478846485.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:26.350Z,1478846486.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:26.381Z,1478846486.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:26.755Z,1478846486.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:26.774Z,1478846486.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:27.152Z,1478846487.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:27.168Z,1478846487.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:27.558Z,1478846487.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:27.572Z,1478846487.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:27.945Z,1478846487.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:27.965Z,1478846487.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:28.351Z,1478846488.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:28.367Z,1478846488.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:28.756Z,1478846488.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:28.771Z,1478846488.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:29.148Z,1478846489.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:29.185Z,1478846489.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:29.549Z,1478846489.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:29.572Z,1478846489.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:29.946Z,1478846489.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:29.984Z,1478846489.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:30.345Z,1478846490.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:30.417Z,1478846490.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:30.746Z,1478846490.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:30.761Z,1478846490.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:31.146Z,1478846491.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:31.193Z,1478846491.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:31.545Z,1478846491.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:31.565Z,1478846491.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:31.950Z,1478846491.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:31.994Z,1478846491.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:32.345Z,1478846492.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:32.388Z,1478846492.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:32.748Z,1478846492.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:32.766Z,1478846492.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:33.151Z,1478846493.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:33.167Z,1478846493.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:33.553Z,1478846493.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:33.569Z,1478846493.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:33.952Z,1478846493.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:33.967Z,1478846493.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:34.348Z,1478846494.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:34.368Z,1478846494.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:34.745Z,1478846494.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:34.778Z,1478846494.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:35.145Z,1478846495.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:35.181Z,1478846495.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:35.545Z,1478846495.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:35.570Z,1478846495.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:35.945Z,1478846495.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:35.978Z,1478846495.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:36.345Z,1478846496.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:36.378Z,1478846496.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:36.745Z,1478846496.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:36.817Z,1478846496.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:37.150Z,1478846497.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:37.165Z,1478846497.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:37.552Z,1478846497.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:37.573Z,1478846497.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:37.952Z,1478846497.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:37.968Z,1478846497.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:38.353Z,1478846498.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:38.373Z,1478846498.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:38.745Z,1478846498.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:38.778Z,1478846498.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:39.145Z,1478846499.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:39.170Z,1478846499.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:39.561Z,1478846499.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:39.576Z,1478846499.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:39.945Z,1478846499.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:39.979Z,1478846499.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:40.349Z,1478846500.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:40.375Z,1478846500.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:40.745Z,1478846500.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:40.801Z,1478846500.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:41.145Z,1478846501.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:41.165Z,1478846501.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:41.553Z,1478846501.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:41.568Z,1478846501.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:41.945Z,1478846501.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:41.993Z,1478846501.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:42.345Z,1478846502.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:42.397Z,1478846502.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:42.745Z,1478846502.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:42.765Z,1478846502.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:43.145Z,1478846503.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:43.165Z,1478846503.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:43.548Z,1478846503.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:43.569Z,1478846503.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:43.952Z,1478846503.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:43.967Z,1478846503.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:44.352Z,1478846504.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:44.441Z,1478846504.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:44.745Z,1478846504.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:44.772Z,1478846504.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:45.145Z,1478846505.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:45.197Z,1478846505.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:45.545Z,1478846505.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:45.565Z,1478846505.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:48.884Z,1478846508.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:48.934Z,1478846508.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:49.044Z,1478846509.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:49.068Z,1478846509.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:49.394Z,1478846509.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:49.443Z,1478846509.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:49.788Z,1478846509.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:49.825Z,1478846509.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:50.195Z,1478846510.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:50.202Z,1478846510.202 [PNI_TCM](ERROR): CRC does not match. Expected:0x10473 got:0x49578
2016-11-11T06:41:50.245Z,1478846510.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:50.598Z,1478846510.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:50.613Z,1478846510.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:50.996Z,1478846510.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:51.016Z,1478846511.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:51.407Z,1478846511.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:51.437Z,1478846511.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:51.787Z,1478846511.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:51.817Z,1478846511.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:52.195Z,1478846512.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:52.217Z,1478846512.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:52.586Z,1478846512.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:52.617Z,1478846512.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:52.985Z,1478846512.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:53.021Z,1478846513.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:53.389Z,1478846513.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:53.413Z,1478846513.413 [PNI_TCM](ERROR): CRC does not match. Expected:0x59846 got:0x6978
2016-11-11T06:41:53.434Z,1478846513.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:53.788Z,1478846513.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:53.820Z,1478846513.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:54.186Z,1478846514.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:54.229Z,1478846514.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:54.587Z,1478846514.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:54.625Z,1478846514.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:54.988Z,1478846514.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:55.029Z,1478846515.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:55.389Z,1478846515.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:55.409Z,1478846515.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:55.791Z,1478846515.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:55.806Z,1478846515.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:56.196Z,1478846516.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:56.211Z,1478846516.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:56.593Z,1478846516.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:56.621Z,1478846516.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:56.989Z,1478846516.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:57.018Z,1478846517.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:57.393Z,1478846517.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:57.409Z,1478846517.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:57.786Z,1478846517.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:57.814Z,1478846517.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:58.198Z,1478846518.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:58.218Z,1478846518.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:58.586Z,1478846518.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:58.612Z,1478846518.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:59.000Z,1478846519.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:59.022Z,1478846519.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:59.386Z,1478846519.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:59.402Z,1478846519.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:59.655Z,1478846519.655 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T06:41:59.655Z,1478846519.655 [Rowe_600LCM] Communications Fault, FailCount= 5
2016-11-11T06:41:59.655Z,1478846519.655 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T06:41:59.795Z,1478846519.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:41:59.818Z,1478846519.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T06:41:59.824Z,1478846519.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:41:59.863Z,1478846519.864 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T06:41:59.864Z,1478846519.864 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-11-11T06:42:00.059Z,1478846520.059 [Rowe_600LCM](INFO): Powering down
2016-11-11T06:42:00.188Z,1478846520.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:00.209Z,1478846520.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T06:42:00.210Z,1478846520.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:00.591Z,1478846520.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:00.626Z,1478846520.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:42:00.627Z,1478846520.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:00.995Z,1478846520.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:01.020Z,1478846521.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:42:01.021Z,1478846521.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:01.396Z,1478846521.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:01.404Z,1478846521.404 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T06:42:01.405Z,1478846521.405 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:42:01.405Z,1478846521.405 [BPC1](ERROR): Data Fault
2016-11-11T06:42:01.416Z,1478846521.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:42:01.417Z,1478846521.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:01.437Z,1478846521.437 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:42:01.785Z,1478846521.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:01.826Z,1478846521.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T06:42:01.827Z,1478846521.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:02.184Z,1478846522.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:02.217Z,1478846522.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T06:42:02.218Z,1478846522.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:02.587Z,1478846522.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:02.621Z,1478846522.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T06:42:02.622Z,1478846522.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:02.641Z,1478846522.641 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:42:02.641Z,1478846522.641 [BPC1] No Fault, FailCount= 1
2016-11-11T06:42:02.987Z,1478846522.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:03.062Z,1478846523.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2016-11-11T06:42:03.063Z,1478846523.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:03.385Z,1478846523.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:03.433Z,1478846523.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T06:42:03.434Z,1478846523.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:03.784Z,1478846523.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:03.820Z,1478846523.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T06:42:03.821Z,1478846523.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:04.187Z,1478846524.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:04.222Z,1478846524.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T06:42:04.223Z,1478846524.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:04.586Z,1478846524.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:04.613Z,1478846524.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T06:42:04.614Z,1478846524.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:04.984Z,1478846524.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:05.028Z,1478846525.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T06:42:05.029Z,1478846525.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:05.385Z,1478846525.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:05.427Z,1478846525.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T06:42:05.428Z,1478846525.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:05.788Z,1478846525.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:05.802Z,1478846525.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T06:42:05.816Z,1478846525.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:06.185Z,1478846526.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:06.204Z,1478846526.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T06:42:06.205Z,1478846526.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:06.588Z,1478846526.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:06.608Z,1478846526.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T06:42:06.609Z,1478846526.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:06.991Z,1478846526.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:07.006Z,1478846527.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T06:42:07.007Z,1478846527.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:07.392Z,1478846527.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:07.418Z,1478846527.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T06:42:07.419Z,1478846527.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:07.792Z,1478846527.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:07.806Z,1478846527.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T06:42:07.807Z,1478846527.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:08.192Z,1478846528.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:08.207Z,1478846528.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T06:42:08.208Z,1478846528.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:08.592Z,1478846528.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:08.617Z,1478846528.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T06:42:08.618Z,1478846528.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:08.992Z,1478846528.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:09.017Z,1478846529.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T06:42:09.018Z,1478846529.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:09.392Z,1478846529.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:09.411Z,1478846529.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T06:42:09.412Z,1478846529.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:09.793Z,1478846529.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:09.808Z,1478846529.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T06:42:09.808Z,1478846529.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:10.193Z,1478846530.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:10.208Z,1478846530.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T06:42:10.209Z,1478846530.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:10.587Z,1478846530.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:10.618Z,1478846530.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T06:42:10.623Z,1478846530.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:10.985Z,1478846530.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:11.020Z,1478846531.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T06:42:11.021Z,1478846531.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:11.385Z,1478846531.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:11.420Z,1478846531.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T06:42:11.421Z,1478846531.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:11.789Z,1478846531.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:11.821Z,1478846531.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T06:42:11.822Z,1478846531.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:12.189Z,1478846532.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:12.228Z,1478846532.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T06:42:12.228Z,1478846532.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:12.585Z,1478846532.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:12.623Z,1478846532.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T06:42:12.624Z,1478846532.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:12.985Z,1478846532.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:13.017Z,1478846533.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T06:42:13.018Z,1478846533.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:13.385Z,1478846533.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:13.426Z,1478846533.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T06:42:13.440Z,1478846533.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:13.789Z,1478846533.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:13.805Z,1478846533.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T06:42:13.806Z,1478846533.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:14.184Z,1478846534.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:14.205Z,1478846534.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T06:42:14.206Z,1478846534.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:14.590Z,1478846534.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:14.604Z,1478846534.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T06:42:14.605Z,1478846534.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:14.990Z,1478846534.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:15.005Z,1478846535.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T06:42:15.006Z,1478846535.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:15.392Z,1478846535.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:15.408Z,1478846535.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T06:42:15.409Z,1478846535.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:15.791Z,1478846535.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:15.868Z,1478846535.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2016-11-11T06:42:15.869Z,1478846535.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:16.191Z,1478846536.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:16.206Z,1478846536.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T06:42:16.207Z,1478846536.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:16.592Z,1478846536.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:16.648Z,1478846536.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T06:42:16.649Z,1478846536.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:16.993Z,1478846536.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:17.012Z,1478846537.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T06:42:17.013Z,1478846537.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:17.385Z,1478846537.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:17.445Z,1478846537.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T06:42:17.446Z,1478846537.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:17.785Z,1478846537.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:17.842Z,1478846537.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T06:42:17.844Z,1478846537.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:18.185Z,1478846538.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:18.219Z,1478846538.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T06:42:18.220Z,1478846538.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:18.585Z,1478846538.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:18.618Z,1478846538.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T06:42:18.619Z,1478846538.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:18.992Z,1478846538.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:19.014Z,1478846539.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T06:42:19.015Z,1478846539.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:19.396Z,1478846539.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:19.411Z,1478846539.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:19.785Z,1478846539.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:19.819Z,1478846539.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:20.185Z,1478846540.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:20.210Z,1478846540.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:20.585Z,1478846540.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:20.618Z,1478846540.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:20.985Z,1478846540.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:21.018Z,1478846541.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:21.392Z,1478846541.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:21.414Z,1478846541.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:21.785Z,1478846541.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:21.818Z,1478846541.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:22.185Z,1478846542.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:22.217Z,1478846542.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:22.592Z,1478846542.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:22.615Z,1478846542.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:22.985Z,1478846542.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:23.018Z,1478846543.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:23.385Z,1478846543.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:23.418Z,1478846543.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:23.792Z,1478846543.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:23.815Z,1478846543.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:24.185Z,1478846544.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:24.218Z,1478846544.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:24.585Z,1478846544.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:24.619Z,1478846544.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:24.996Z,1478846544.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:25.024Z,1478846545.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:25.385Z,1478846545.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:25.410Z,1478846545.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:25.785Z,1478846545.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:25.819Z,1478846545.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:26.185Z,1478846546.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:26.211Z,1478846546.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:26.585Z,1478846546.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:26.617Z,1478846546.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:26.989Z,1478846546.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:27.021Z,1478846547.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:27.385Z,1478846547.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:27.417Z,1478846547.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:27.789Z,1478846547.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:27.821Z,1478846547.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:28.185Z,1478846548.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:28.221Z,1478846548.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:28.585Z,1478846548.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:28.618Z,1478846548.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:28.989Z,1478846548.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:29.021Z,1478846549.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:29.385Z,1478846549.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:29.421Z,1478846549.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:29.789Z,1478846549.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:29.841Z,1478846549.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:30.185Z,1478846550.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:30.241Z,1478846550.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:30.585Z,1478846550.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:30.600Z,1478846550.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:30.985Z,1478846550.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:31.005Z,1478846551.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:31.389Z,1478846551.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:31.442Z,1478846551.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:31.796Z,1478846551.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:31.811Z,1478846551.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:32.193Z,1478846552.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:32.253Z,1478846552.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:32.589Z,1478846552.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:32.643Z,1478846552.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:32.994Z,1478846552.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:33.009Z,1478846553.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:33.393Z,1478846553.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:33.413Z,1478846553.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:33.792Z,1478846553.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:33.813Z,1478846553.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:34.198Z,1478846554.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:34.212Z,1478846554.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:34.588Z,1478846554.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:34.621Z,1478846554.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:34.985Z,1478846554.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:35.020Z,1478846555.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:35.386Z,1478846555.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:35.421Z,1478846555.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:35.786Z,1478846555.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:35.813Z,1478846555.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:36.185Z,1478846556.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:36.217Z,1478846556.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:36.585Z,1478846556.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:36.612Z,1478846556.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:36.985Z,1478846556.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:37.012Z,1478846557.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:37.385Z,1478846557.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:37.419Z,1478846557.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:37.785Z,1478846557.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:37.807Z,1478846557.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:38.185Z,1478846558.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:38.212Z,1478846558.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:38.585Z,1478846558.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:38.622Z,1478846558.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:38.985Z,1478846558.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:39.022Z,1478846559.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:39.385Z,1478846559.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:39.416Z,1478846559.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:39.785Z,1478846559.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:39.800Z,1478846559.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:40.189Z,1478846560.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:40.204Z,1478846560.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:40.588Z,1478846560.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:40.604Z,1478846560.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:40.988Z,1478846560.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:41.003Z,1478846561.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:41.392Z,1478846561.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:41.407Z,1478846561.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:41.791Z,1478846561.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:41.813Z,1478846561.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:42.192Z,1478846562.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:42.207Z,1478846562.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:42.596Z,1478846562.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:42.617Z,1478846562.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:42.995Z,1478846562.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:43.014Z,1478846563.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:43.385Z,1478846563.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:43.417Z,1478846563.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:43.788Z,1478846563.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:43.797Z,1478846563.797 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T06:42:43.797Z,1478846563.797 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:42:43.797Z,1478846563.797 [BPC1](ERROR): Data Fault
2016-11-11T06:42:43.823Z,1478846563.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:43.867Z,1478846563.867 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:42:44.192Z,1478846564.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:44.208Z,1478846564.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:44.585Z,1478846564.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:44.605Z,1478846564.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:44.988Z,1478846564.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:45.009Z,1478846565.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:45.060Z,1478846565.060 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:42:45.060Z,1478846565.060 [BPC1] No Fault, FailCount= 1
2016-11-11T06:42:45.392Z,1478846565.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:45.461Z,1478846565.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:45.794Z,1478846565.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:45.845Z,1478846565.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:49.119Z,1478846569.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:49.146Z,1478846569.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:49.246Z,1478846569.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:49.280Z,1478846569.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:49.606Z,1478846569.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:49.629Z,1478846569.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:50.006Z,1478846570.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:50.021Z,1478846570.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:50.408Z,1478846570.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:50.424Z,1478846570.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:50.808Z,1478846570.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:50.829Z,1478846570.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:51.208Z,1478846571.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:51.223Z,1478846571.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:51.600Z,1478846571.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:51.633Z,1478846571.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:52.001Z,1478846572.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:52.026Z,1478846572.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:52.401Z,1478846572.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:52.426Z,1478846572.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:52.800Z,1478846572.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:52.833Z,1478846572.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:53.201Z,1478846573.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:53.233Z,1478846573.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:53.601Z,1478846573.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:53.633Z,1478846573.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:54.000Z,1478846574.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:54.033Z,1478846574.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:54.399Z,1478846574.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:54.414Z,1478846574.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:54.801Z,1478846574.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:54.841Z,1478846574.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:55.204Z,1478846575.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:55.220Z,1478846575.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:55.605Z,1478846575.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:55.621Z,1478846575.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:56.005Z,1478846576.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:56.029Z,1478846576.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:56.408Z,1478846576.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:56.424Z,1478846576.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:56.809Z,1478846576.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:56.824Z,1478846576.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:57.213Z,1478846577.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:57.233Z,1478846577.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:57.637Z,1478846577.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:57.737Z,1478846577.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:58.009Z,1478846578.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:58.046Z,1478846578.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:58.401Z,1478846578.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:58.425Z,1478846578.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:58.809Z,1478846578.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:58.857Z,1478846578.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:59.201Z,1478846579.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:59.215Z,1478846579.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:42:59.609Z,1478846579.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:42:59.660Z,1478846579.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:00.005Z,1478846580.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:00.058Z,1478846580.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:00.405Z,1478846580.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:00.420Z,1478846580.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:00.813Z,1478846580.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:00.828Z,1478846580.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:01.215Z,1478846581.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:01.261Z,1478846581.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:01.677Z,1478846581.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:01.732Z,1478846581.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:02.010Z,1478846582.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:02.041Z,1478846582.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:02.419Z,1478846582.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:02.438Z,1478846582.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:02.826Z,1478846582.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:02.879Z,1478846582.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:03.233Z,1478846583.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:03.261Z,1478846583.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:03.606Z,1478846583.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:03.641Z,1478846583.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:04.027Z,1478846584.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:04.079Z,1478846584.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:04.407Z,1478846584.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:04.458Z,1478846584.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:04.803Z,1478846584.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:04.843Z,1478846584.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:05.211Z,1478846585.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:05.249Z,1478846585.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:05.608Z,1478846585.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:05.644Z,1478846585.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:05.996Z,1478846585.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:06.024Z,1478846586.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:06.415Z,1478846586.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:06.472Z,1478846586.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:06.808Z,1478846586.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:06.836Z,1478846586.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:07.205Z,1478846587.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:07.249Z,1478846587.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:07.623Z,1478846587.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:07.667Z,1478846587.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:08.018Z,1478846588.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:08.068Z,1478846588.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:08.410Z,1478846588.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:08.434Z,1478846588.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:08.815Z,1478846588.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:08.834Z,1478846588.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:09.205Z,1478846589.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:09.230Z,1478846589.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:09.601Z,1478846589.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:09.653Z,1478846589.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:10.005Z,1478846590.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:10.066Z,1478846590.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:10.405Z,1478846590.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:10.458Z,1478846590.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:10.807Z,1478846590.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:10.852Z,1478846590.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:11.228Z,1478846591.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:11.257Z,1478846591.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:11.609Z,1478846591.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:11.629Z,1478846591.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:12.008Z,1478846592.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:12.071Z,1478846592.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:12.420Z,1478846592.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:12.470Z,1478846592.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:12.803Z,1478846592.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:12.818Z,1478846592.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:13.228Z,1478846593.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:13.289Z,1478846593.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:13.613Z,1478846593.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:13.628Z,1478846593.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:14.003Z,1478846594.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:14.071Z,1478846594.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:14.470Z,1478846594.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:14.582Z,1478846594.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:14.806Z,1478846594.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:14.873Z,1478846594.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:15.208Z,1478846595.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:15.238Z,1478846595.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:15.599Z,1478846595.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:15.639Z,1478846595.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:15.999Z,1478846595.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:16.045Z,1478846596.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:16.399Z,1478846596.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:16.441Z,1478846596.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:16.799Z,1478846596.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:16.860Z,1478846596.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:17.204Z,1478846597.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:17.261Z,1478846597.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:17.602Z,1478846597.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:17.647Z,1478846597.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:18.006Z,1478846598.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:18.043Z,1478846598.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:18.406Z,1478846598.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:18.436Z,1478846598.436 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:18.436Z,1478846598.436 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2016-11-11T06:43:18.436Z,1478846598.436 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:43:18.504Z,1478846598.504 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:18.505Z,1478846598.505 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2016-11-11T06:43:18.505Z,1478846598.505 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:43:18.554Z,1478846598.554 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:43:18.555Z,1478846598.555 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:43:18.797Z,1478846598.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:18.951Z,1478846598.951 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:43:18.952Z,1478846598.952 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2016-11-11T06:43:18.952Z,1478846598.952 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:43:18.952Z,1478846598.953 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2016-11-11T06:43:19.203Z,1478846599.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:19.226Z,1478846599.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:43:19.226Z,1478846599.226 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:43:19.227Z,1478846599.227 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:43:19.265Z,1478846599.265 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:43:19.266Z,1478846599.266 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:43:19.266Z,1478846599.266 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:43:19.599Z,1478846599.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:19.639Z,1478846599.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:43:19.649Z,1478846599.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:19.999Z,1478846599.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:20.047Z,1478846600.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:43:20.049Z,1478846600.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:20.403Z,1478846600.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:20.453Z,1478846600.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:43:20.454Z,1478846600.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:20.798Z,1478846600.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:20.837Z,1478846600.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T06:43:20.838Z,1478846600.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:21.203Z,1478846601.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:21.262Z,1478846601.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T06:43:21.263Z,1478846601.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:21.617Z,1478846601.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:21.640Z,1478846601.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T06:43:21.641Z,1478846601.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:21.997Z,1478846601.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:22.029Z,1478846602.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T06:43:22.030Z,1478846602.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:22.397Z,1478846602.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:22.428Z,1478846602.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T06:43:22.429Z,1478846602.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:22.797Z,1478846602.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:22.824Z,1478846602.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T06:43:22.825Z,1478846602.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:23.201Z,1478846603.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:23.241Z,1478846603.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T06:43:23.242Z,1478846603.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:23.253Z,1478846603.253 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:23.254Z,1478846603.253 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 19
2016-11-11T06:43:23.254Z,1478846603.254 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:43:23.290Z,1478846603.290 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:43:23.597Z,1478846603.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:23.620Z,1478846603.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T06:43:23.622Z,1478846603.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:23.669Z,1478846603.669 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:43:23.669Z,1478846603.669 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 19
2016-11-11T06:43:24.005Z,1478846604.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:24.020Z,1478846604.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T06:43:24.021Z,1478846604.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:24.026Z,1478846604.026 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:43:24.027Z,1478846604.027 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:43:24.027Z,1478846604.027 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:43:24.404Z,1478846604.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:24.419Z,1478846604.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T06:43:24.420Z,1478846604.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:24.807Z,1478846604.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:24.824Z,1478846604.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T06:43:24.826Z,1478846604.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:25.204Z,1478846605.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:25.223Z,1478846605.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T06:43:25.224Z,1478846605.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:25.608Z,1478846605.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:25.617Z,1478846605.617 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T06:43:25.617Z,1478846605.617 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:43:25.617Z,1478846605.617 [BPC1](ERROR): Data Fault
2016-11-11T06:43:25.624Z,1478846605.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T06:43:25.626Z,1478846605.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:25.675Z,1478846605.675 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:43:26.005Z,1478846606.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:26.020Z,1478846606.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T06:43:26.021Z,1478846606.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:26.397Z,1478846606.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:26.434Z,1478846606.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T06:43:26.440Z,1478846606.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:26.798Z,1478846606.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:26.829Z,1478846606.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T06:43:26.830Z,1478846606.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:26.862Z,1478846606.862 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:43:26.862Z,1478846606.862 [BPC1] No Fault, FailCount= 1
2016-11-11T06:43:27.197Z,1478846607.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:27.277Z,1478846607.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T06:43:27.278Z,1478846607.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:27.597Z,1478846607.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:27.654Z,1478846607.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T06:43:27.656Z,1478846607.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:27.997Z,1478846607.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:28.038Z,1478846608.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T06:43:28.039Z,1478846608.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:28.397Z,1478846608.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:28.441Z,1478846608.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T06:43:28.442Z,1478846608.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:28.797Z,1478846608.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:28.812Z,1478846608.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T06:43:28.813Z,1478846608.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:29.205Z,1478846609.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:29.242Z,1478846609.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T06:43:29.243Z,1478846609.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:29.597Z,1478846609.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:29.622Z,1478846609.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T06:43:29.623Z,1478846609.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:30.007Z,1478846610.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:30.024Z,1478846610.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T06:43:30.025Z,1478846610.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:30.409Z,1478846610.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:30.443Z,1478846610.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T06:43:30.460Z,1478846610.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:30.804Z,1478846610.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:30.828Z,1478846610.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T06:43:30.830Z,1478846610.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:31.206Z,1478846611.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:31.226Z,1478846611.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T06:43:31.227Z,1478846611.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:31.597Z,1478846611.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:31.637Z,1478846611.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T06:43:31.638Z,1478846611.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:31.997Z,1478846611.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:32.044Z,1478846612.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T06:43:32.045Z,1478846612.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:32.402Z,1478846612.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:32.433Z,1478846612.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T06:43:32.434Z,1478846612.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:32.798Z,1478846612.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:32.833Z,1478846612.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T06:43:32.834Z,1478846612.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:33.199Z,1478846613.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:33.233Z,1478846613.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T06:43:33.234Z,1478846613.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:33.597Z,1478846613.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:33.635Z,1478846613.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T06:43:33.637Z,1478846613.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:33.997Z,1478846613.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:34.033Z,1478846614.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T06:43:34.034Z,1478846614.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:34.397Z,1478846614.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:34.416Z,1478846614.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T06:43:34.417Z,1478846614.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:34.799Z,1478846614.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:34.824Z,1478846614.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T06:43:34.825Z,1478846614.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:35.208Z,1478846615.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:35.247Z,1478846615.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T06:43:35.248Z,1478846615.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:35.604Z,1478846615.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:35.624Z,1478846615.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T06:43:35.625Z,1478846615.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:36.006Z,1478846616.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:36.023Z,1478846616.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T06:43:36.025Z,1478846616.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:36.412Z,1478846616.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:36.427Z,1478846616.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T06:43:36.429Z,1478846616.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:36.803Z,1478846616.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:36.837Z,1478846616.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T06:43:36.838Z,1478846616.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:37.204Z,1478846617.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:37.223Z,1478846617.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T06:43:37.224Z,1478846617.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:37.597Z,1478846617.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:37.629Z,1478846617.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T06:43:37.630Z,1478846617.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:37.999Z,1478846617.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:38.032Z,1478846618.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T06:43:38.033Z,1478846618.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:38.412Z,1478846618.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:38.438Z,1478846618.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:38.804Z,1478846618.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:38.813Z,1478846618.813 [PNI_TCM](ERROR): CRC does not match. Expected:0x65262 got:0x44568
2016-11-11T06:43:38.841Z,1478846618.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:39.198Z,1478846619.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:39.217Z,1478846619.217 [PNI_TCM](ERROR): CRC does not match. Expected:0x26793 got:0x63440
2016-11-11T06:43:39.238Z,1478846619.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:39.599Z,1478846619.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:39.665Z,1478846619.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:39.997Z,1478846619.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:40.066Z,1478846620.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:40.400Z,1478846620.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:40.441Z,1478846620.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:40.798Z,1478846620.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:40.853Z,1478846620.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:41.199Z,1478846621.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:41.244Z,1478846621.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:41.597Z,1478846621.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:41.650Z,1478846621.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:41.997Z,1478846621.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:42.053Z,1478846622.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:42.399Z,1478846622.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:42.444Z,1478846622.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:42.800Z,1478846622.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:42.845Z,1478846622.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:43.197Z,1478846623.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:43.236Z,1478846623.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:43.597Z,1478846623.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:43.637Z,1478846623.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:43.999Z,1478846623.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:44.021Z,1478846624.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:44.399Z,1478846624.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:44.414Z,1478846624.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:44.797Z,1478846624.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:44.839Z,1478846624.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:45.204Z,1478846625.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:45.221Z,1478846625.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:45.607Z,1478846625.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:45.623Z,1478846625.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:46.006Z,1478846626.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:46.021Z,1478846626.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:49.431Z,1478846629.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:49.459Z,1478846629.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:49.561Z,1478846629.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:49.604Z,1478846629.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:49.917Z,1478846629.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:49.932Z,1478846629.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:50.316Z,1478846630.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:50.331Z,1478846630.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:50.716Z,1478846630.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:50.732Z,1478846630.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:51.121Z,1478846631.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:51.136Z,1478846631.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:51.515Z,1478846631.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:51.530Z,1478846631.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:51.916Z,1478846631.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:51.939Z,1478846631.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:52.324Z,1478846632.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:52.340Z,1478846632.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:52.724Z,1478846632.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:52.739Z,1478846632.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:53.109Z,1478846633.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:53.140Z,1478846633.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:53.513Z,1478846633.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:53.545Z,1478846633.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:53.909Z,1478846633.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:53.973Z,1478846633.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:54.309Z,1478846634.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:54.361Z,1478846634.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:54.717Z,1478846634.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:54.732Z,1478846634.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:55.113Z,1478846635.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:55.159Z,1478846635.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:55.512Z,1478846635.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:55.528Z,1478846635.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:55.917Z,1478846635.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:55.967Z,1478846635.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:56.316Z,1478846636.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:56.366Z,1478846636.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:56.713Z,1478846636.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:56.728Z,1478846636.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:57.123Z,1478846637.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:57.139Z,1478846637.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:57.516Z,1478846637.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:57.531Z,1478846637.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:57.920Z,1478846637.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:57.935Z,1478846637.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:58.316Z,1478846638.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:58.339Z,1478846638.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:58.709Z,1478846638.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:58.742Z,1478846638.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:59.109Z,1478846639.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:59.141Z,1478846639.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:59.509Z,1478846639.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:59.549Z,1478846639.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:43:59.909Z,1478846639.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:43:59.929Z,1478846639.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:00.309Z,1478846640.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:00.324Z,1478846640.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:00.714Z,1478846640.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:00.745Z,1478846640.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:01.117Z,1478846641.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:01.132Z,1478846641.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:01.518Z,1478846641.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:01.534Z,1478846641.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:01.912Z,1478846641.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:01.936Z,1478846641.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:02.309Z,1478846642.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:02.335Z,1478846642.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:02.709Z,1478846642.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:02.753Z,1478846642.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:03.109Z,1478846643.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:03.141Z,1478846643.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:03.509Z,1478846643.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:03.543Z,1478846643.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:03.909Z,1478846643.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:03.949Z,1478846643.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:04.309Z,1478846644.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:04.329Z,1478846644.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:04.716Z,1478846644.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:04.731Z,1478846644.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:05.116Z,1478846645.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:05.132Z,1478846645.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:05.515Z,1478846645.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:05.537Z,1478846645.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:05.913Z,1478846645.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:05.937Z,1478846645.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:06.312Z,1478846646.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:06.335Z,1478846646.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:06.709Z,1478846646.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:06.741Z,1478846646.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:07.109Z,1478846647.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:07.153Z,1478846647.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:07.509Z,1478846647.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:07.549Z,1478846647.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:07.909Z,1478846647.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:07.929Z,1478846647.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:08.309Z,1478846648.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:08.355Z,1478846648.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:08.709Z,1478846648.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:08.765Z,1478846648.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:09.109Z,1478846649.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:09.145Z,1478846649.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:09.509Z,1478846649.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:09.545Z,1478846649.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:09.909Z,1478846649.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:09.937Z,1478846649.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:10.309Z,1478846650.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:10.354Z,1478846650.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:10.709Z,1478846650.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:10.752Z,1478846650.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:11.109Z,1478846651.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:11.162Z,1478846651.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:11.509Z,1478846651.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:11.562Z,1478846651.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:11.909Z,1478846651.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:11.929Z,1478846651.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:12.309Z,1478846652.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:12.324Z,1478846652.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:12.714Z,1478846652.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:12.729Z,1478846652.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:13.116Z,1478846653.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:13.131Z,1478846653.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:13.515Z,1478846653.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:13.530Z,1478846653.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:13.916Z,1478846653.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:13.937Z,1478846653.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:14.316Z,1478846654.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:14.331Z,1478846654.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:14.716Z,1478846654.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:14.732Z,1478846654.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:15.117Z,1478846655.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:15.137Z,1478846655.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:15.509Z,1478846655.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:15.542Z,1478846655.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:15.909Z,1478846655.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:15.934Z,1478846655.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:16.309Z,1478846656.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:16.345Z,1478846656.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:16.709Z,1478846656.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:16.742Z,1478846656.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:17.109Z,1478846657.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:17.141Z,1478846657.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:17.509Z,1478846657.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:17.547Z,1478846657.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:17.909Z,1478846657.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:17.945Z,1478846657.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:18.309Z,1478846658.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:18.336Z,1478846658.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:18.709Z,1478846658.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:18.741Z,1478846658.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:19.109Z,1478846659.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:19.145Z,1478846659.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:19.509Z,1478846659.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:19.549Z,1478846659.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:19.917Z,1478846659.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:19.949Z,1478846659.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:20.309Z,1478846660.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:20.347Z,1478846660.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:20.709Z,1478846660.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:20.742Z,1478846660.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:21.109Z,1478846661.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:21.147Z,1478846661.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:21.517Z,1478846661.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:21.556Z,1478846661.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:21.912Z,1478846661.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:21.928Z,1478846661.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:22.309Z,1478846662.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:22.330Z,1478846662.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:22.717Z,1478846662.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:22.736Z,1478846662.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:23.116Z,1478846663.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:23.132Z,1478846663.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:23.516Z,1478846663.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:23.601Z,1478846663.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:23.916Z,1478846663.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:23.956Z,1478846663.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:24.309Z,1478846664.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:24.377Z,1478846664.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:24.709Z,1478846664.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:24.741Z,1478846664.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:25.109Z,1478846665.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:25.174Z,1478846665.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:25.509Z,1478846665.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:25.561Z,1478846665.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:25.909Z,1478846665.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:25.944Z,1478846665.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:26.313Z,1478846666.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:26.353Z,1478846666.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:26.709Z,1478846666.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:26.743Z,1478846666.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:27.109Z,1478846667.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:27.148Z,1478846667.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:27.509Z,1478846667.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:27.548Z,1478846667.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:27.909Z,1478846667.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:27.924Z,1478846667.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:28.309Z,1478846668.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:28.329Z,1478846668.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:28.709Z,1478846668.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:28.752Z,1478846668.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:29.109Z,1478846669.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:29.128Z,1478846669.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:29.514Z,1478846669.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:29.538Z,1478846669.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:29.917Z,1478846669.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:29.936Z,1478846669.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:30.315Z,1478846670.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:30.334Z,1478846670.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:30.717Z,1478846670.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:30.732Z,1478846670.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:31.120Z,1478846671.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:31.153Z,1478846671.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:31.509Z,1478846671.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:31.549Z,1478846671.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:31.909Z,1478846671.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:31.944Z,1478846671.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:32.311Z,1478846672.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:32.339Z,1478846672.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:32.709Z,1478846672.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:32.749Z,1478846672.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:33.109Z,1478846673.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:33.138Z,1478846673.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:33.514Z,1478846673.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:33.549Z,1478846673.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:33.911Z,1478846673.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:33.945Z,1478846673.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:34.309Z,1478846674.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:34.349Z,1478846674.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:34.708Z,1478846674.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:34.748Z,1478846674.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:35.115Z,1478846675.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:35.149Z,1478846675.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:35.512Z,1478846675.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:35.549Z,1478846675.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:35.917Z,1478846675.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:35.951Z,1478846675.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:36.317Z,1478846676.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:36.346Z,1478846676.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:36.710Z,1478846676.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:36.721Z,1478846676.721 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T06:44:36.721Z,1478846676.721 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:44:36.721Z,1478846676.721 [BPC1](ERROR): Data Fault
2016-11-11T06:44:36.768Z,1478846676.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:36.802Z,1478846676.802 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:44:37.116Z,1478846677.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:37.153Z,1478846677.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:37.509Z,1478846677.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:37.549Z,1478846677.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:37.909Z,1478846677.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:37.956Z,1478846677.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:37.975Z,1478846677.976 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:44:37.976Z,1478846677.976 [BPC1] No Fault, FailCount= 1
2016-11-11T06:44:38.311Z,1478846678.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:38.397Z,1478846678.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:38.711Z,1478846678.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:38.753Z,1478846678.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:39.115Z,1478846679.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:39.153Z,1478846679.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:39.514Z,1478846679.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:39.532Z,1478846679.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:39.919Z,1478846679.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:39.934Z,1478846679.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:40.320Z,1478846680.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:40.335Z,1478846680.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:40.716Z,1478846680.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:40.749Z,1478846680.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:41.120Z,1478846681.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:41.128Z,1478846681.128 [PNI_TCM](ERROR): CRC does not match. Expected:0x36339 got:0x49012
2016-11-11T06:44:41.153Z,1478846681.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:41.511Z,1478846681.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:41.545Z,1478846681.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:41.911Z,1478846681.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:41.947Z,1478846681.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:42.309Z,1478846682.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:42.345Z,1478846682.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:42.710Z,1478846682.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:42.745Z,1478846682.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:43.111Z,1478846683.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:43.149Z,1478846683.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:43.511Z,1478846683.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:43.538Z,1478846683.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:43.909Z,1478846683.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:43.953Z,1478846683.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:44.310Z,1478846684.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:44.327Z,1478846684.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:44.715Z,1478846684.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:44.730Z,1478846684.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:45.116Z,1478846685.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:45.131Z,1478846685.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:45.516Z,1478846685.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:45.541Z,1478846685.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:45.920Z,1478846685.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:45.936Z,1478846685.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:46.314Z,1478846686.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:46.341Z,1478846686.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:49.596Z,1478846689.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:49.635Z,1478846689.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:49.721Z,1478846689.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:49.757Z,1478846689.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:50.091Z,1478846690.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:50.106Z,1478846690.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:50.488Z,1478846690.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:50.545Z,1478846690.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:50.892Z,1478846690.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:50.914Z,1478846690.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:51.293Z,1478846691.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:51.326Z,1478846691.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:51.697Z,1478846691.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:51.717Z,1478846691.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:52.091Z,1478846692.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:52.107Z,1478846692.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:52.493Z,1478846692.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:52.543Z,1478846692.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:52.896Z,1478846692.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:52.911Z,1478846692.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:53.292Z,1478846693.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:53.347Z,1478846693.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:53.693Z,1478846693.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:53.746Z,1478846693.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:54.092Z,1478846694.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:54.115Z,1478846694.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:54.485Z,1478846694.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:54.516Z,1478846694.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:54.885Z,1478846694.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:54.922Z,1478846694.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:55.298Z,1478846695.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:55.313Z,1478846695.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:55.693Z,1478846695.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:55.708Z,1478846695.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:56.092Z,1478846696.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:56.113Z,1478846696.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:56.493Z,1478846696.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:56.508Z,1478846696.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:56.892Z,1478846696.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:56.913Z,1478846696.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:57.293Z,1478846697.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:57.313Z,1478846697.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:57.685Z,1478846697.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:57.717Z,1478846697.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:58.085Z,1478846698.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:58.116Z,1478846698.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:58.485Z,1478846698.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:58.523Z,1478846698.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:58.885Z,1478846698.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:58.912Z,1478846698.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:59.285Z,1478846699.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:59.329Z,1478846699.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:44:59.685Z,1478846699.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:44:59.700Z,1478846699.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:00.085Z,1478846700.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:00.100Z,1478846700.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:00.491Z,1478846700.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:00.506Z,1478846700.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:00.892Z,1478846700.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:00.908Z,1478846700.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:01.291Z,1478846701.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:01.313Z,1478846701.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:01.696Z,1478846701.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:01.711Z,1478846701.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:02.092Z,1478846702.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:02.107Z,1478846702.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:02.492Z,1478846702.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:02.513Z,1478846702.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:02.885Z,1478846702.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:02.917Z,1478846702.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:03.285Z,1478846703.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:03.318Z,1478846703.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:03.685Z,1478846703.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:03.718Z,1478846703.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:04.096Z,1478846704.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:04.117Z,1478846704.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:04.489Z,1478846704.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:04.514Z,1478846704.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:04.885Z,1478846704.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:04.920Z,1478846704.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:05.285Z,1478846705.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:05.317Z,1478846705.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:05.685Z,1478846705.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:05.765Z,1478846705.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:06.085Z,1478846706.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:06.100Z,1478846706.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:06.485Z,1478846706.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:06.537Z,1478846706.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:06.885Z,1478846706.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:06.905Z,1478846706.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:07.292Z,1478846707.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:07.339Z,1478846707.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:07.692Z,1478846707.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:07.744Z,1478846707.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:08.092Z,1478846708.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:08.106Z,1478846708.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:08.492Z,1478846708.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:08.507Z,1478846708.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:08.892Z,1478846708.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:08.907Z,1478846708.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:09.292Z,1478846709.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:09.306Z,1478846709.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:09.693Z,1478846709.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:09.713Z,1478846709.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:10.092Z,1478846710.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:10.107Z,1478846710.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:10.493Z,1478846710.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:10.513Z,1478846710.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:10.892Z,1478846710.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:10.907Z,1478846710.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:11.293Z,1478846711.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:11.308Z,1478846711.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:11.693Z,1478846711.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:11.713Z,1478846711.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:12.093Z,1478846712.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:12.108Z,1478846712.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:12.493Z,1478846712.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:12.508Z,1478846712.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:12.896Z,1478846712.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:12.911Z,1478846712.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:13.291Z,1478846713.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:13.306Z,1478846713.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:13.691Z,1478846713.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:13.706Z,1478846713.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:14.092Z,1478846714.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:14.113Z,1478846714.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:14.492Z,1478846714.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:14.513Z,1478846714.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:14.892Z,1478846714.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:14.907Z,1478846714.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:15.300Z,1478846715.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:15.315Z,1478846715.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:15.685Z,1478846715.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:15.717Z,1478846715.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:16.085Z,1478846716.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:16.125Z,1478846716.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:16.491Z,1478846716.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:16.524Z,1478846716.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:16.892Z,1478846716.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:16.928Z,1478846716.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:17.288Z,1478846717.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:17.304Z,1478846717.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:17.692Z,1478846717.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:17.708Z,1478846717.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:18.088Z,1478846718.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:18.117Z,1478846718.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:18.489Z,1478846718.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:18.510Z,1478846718.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:18.892Z,1478846718.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:18.907Z,1478846718.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:19.288Z,1478846719.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:19.319Z,1478846719.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:19.685Z,1478846719.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:19.741Z,1478846719.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:20.085Z,1478846720.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:20.118Z,1478846720.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:20.485Z,1478846720.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:20.518Z,1478846720.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:20.889Z,1478846720.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:20.921Z,1478846720.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:21.285Z,1478846721.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:21.318Z,1478846721.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:21.685Z,1478846721.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:21.718Z,1478846721.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:22.089Z,1478846722.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:22.125Z,1478846722.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:22.485Z,1478846722.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:22.516Z,1478846722.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:22.885Z,1478846722.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:22.893Z,1478846722.893 [BPC1](ERROR): Failed to receive battery data
2016-11-11T06:45:22.893Z,1478846722.893 [BPC1] Communications Fault, FailCount= 1
2016-11-11T06:45:22.893Z,1478846722.893 [BPC1](ERROR): Communications Fault
2016-11-11T06:45:22.933Z,1478846722.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:22.976Z,1478846722.976 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T06:45:23.285Z,1478846723.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:23.301Z,1478846723.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:23.685Z,1478846723.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:23.705Z,1478846723.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:24.085Z,1478846724.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:24.109Z,1478846724.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:24.145Z,1478846724.145 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:45:24.145Z,1478846724.145 [BPC1] No Fault, FailCount= 1
2016-11-11T06:45:24.485Z,1478846724.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:24.569Z,1478846724.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:24.885Z,1478846724.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:24.955Z,1478846724.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:25.285Z,1478846725.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:25.310Z,1478846725.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:25.689Z,1478846725.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:25.714Z,1478846725.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:26.085Z,1478846726.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:26.116Z,1478846726.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:26.485Z,1478846726.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:26.521Z,1478846726.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:26.885Z,1478846726.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:26.917Z,1478846726.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:27.285Z,1478846727.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:27.320Z,1478846727.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:27.692Z,1478846727.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:27.707Z,1478846727.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:28.088Z,1478846728.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:28.117Z,1478846728.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:28.492Z,1478846728.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:28.507Z,1478846728.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:28.892Z,1478846728.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:28.907Z,1478846728.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:29.300Z,1478846729.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:29.321Z,1478846729.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:29.685Z,1478846729.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:29.721Z,1478846729.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:30.085Z,1478846730.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:30.117Z,1478846730.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:30.485Z,1478846730.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:30.517Z,1478846730.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:30.885Z,1478846730.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:30.916Z,1478846730.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:31.285Z,1478846731.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:31.312Z,1478846731.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:31.689Z,1478846731.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:31.725Z,1478846731.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:32.085Z,1478846732.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:32.125Z,1478846732.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:32.485Z,1478846732.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:32.500Z,1478846732.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:32.889Z,1478846732.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:32.909Z,1478846732.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:33.293Z,1478846733.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:33.307Z,1478846733.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:33.693Z,1478846733.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:33.713Z,1478846733.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:34.094Z,1478846734.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:34.118Z,1478846734.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:34.493Z,1478846734.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:34.513Z,1478846734.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:34.899Z,1478846734.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:34.914Z,1478846734.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:35.286Z,1478846735.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:35.317Z,1478846735.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:35.685Z,1478846735.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:35.744Z,1478846735.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:36.085Z,1478846736.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:36.118Z,1478846736.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:36.485Z,1478846736.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:36.521Z,1478846736.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:36.885Z,1478846736.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:36.929Z,1478846736.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:37.285Z,1478846737.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:37.337Z,1478846737.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:37.685Z,1478846737.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:37.721Z,1478846737.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:38.089Z,1478846738.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:38.141Z,1478846738.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:38.485Z,1478846738.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:38.530Z,1478846738.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:38.885Z,1478846738.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:38.912Z,1478846738.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:39.285Z,1478846739.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:39.305Z,1478846739.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:39.688Z,1478846739.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:39.703Z,1478846739.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:40.092Z,1478846740.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:40.107Z,1478846740.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:40.497Z,1478846740.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:40.517Z,1478846740.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:40.892Z,1478846740.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:40.907Z,1478846740.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:41.292Z,1478846741.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:41.307Z,1478846741.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:41.692Z,1478846741.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:41.706Z,1478846741.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:42.092Z,1478846742.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:42.107Z,1478846742.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:42.493Z,1478846742.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:42.508Z,1478846742.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:42.900Z,1478846742.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:42.921Z,1478846742.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:43.285Z,1478846743.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:43.312Z,1478846743.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:43.685Z,1478846743.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:43.700Z,1478846743.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:44.090Z,1478846744.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:44.105Z,1478846744.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:44.490Z,1478846744.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:44.505Z,1478846744.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:44.892Z,1478846744.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:44.908Z,1478846744.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:45.293Z,1478846745.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:45.313Z,1478846745.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:45.321Z,1478846745.321 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T06:45:45.322Z,1478846745.322 [Default:CheckIn:C.Wait] Stopped
2016-11-11T06:45:45.322Z,1478846745.322 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T06:45:45.322Z,1478846745.322 [Default:CheckIn:D] Running Loop=1
2016-11-11T06:45:45.692Z,1478846745.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:45.713Z,1478846745.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:45.721Z,1478846745.721 [Default:CheckIn:D] Stopped
2016-11-11T06:45:45.722Z,1478846745.722 [Default:CheckIn:E] Running Loop=1
2016-11-11T06:45:46.088Z,1478846746.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:46.120Z,1478846746.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:46.129Z,1478846746.129 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 115.740186 min 
2016-11-11T06:45:46.129Z,1478846746.129 [Default:CheckIn:E] Stopped
2016-11-11T06:45:46.129Z,1478846746.129 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T06:45:46.130Z,1478846746.129 [Default:CheckIn] Stopped
2016-11-11T06:45:46.130Z,1478846746.130 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T06:45:46.130Z,1478846746.130 [Default:CheckIn](INFO): Running loop #12
2016-11-11T06:45:46.130Z,1478846746.130 [Default:CheckIn] Running Loop=12
2016-11-11T06:45:46.130Z,1478846746.130 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T06:45:46.130Z,1478846746.130 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T06:45:46.485Z,1478846746.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:46.521Z,1478846746.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:49.737Z,1478846749.737 [NAL9602](INFO): Powering up
2016-11-11T06:45:49.765Z,1478846749.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:49.833Z,1478846749.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:49.870Z,1478846749.870 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T06:45:49.909Z,1478846749.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:49.932Z,1478846749.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:50.301Z,1478846750.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:50.333Z,1478846750.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:50.701Z,1478846750.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:50.753Z,1478846750.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:51.109Z,1478846751.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:51.145Z,1478846751.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:51.501Z,1478846751.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:51.554Z,1478846751.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:51.901Z,1478846751.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:51.921Z,1478846751.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:52.305Z,1478846752.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:52.357Z,1478846752.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:52.707Z,1478846752.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:52.750Z,1478846752.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:53.109Z,1478846753.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:53.124Z,1478846753.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:53.512Z,1478846753.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:53.528Z,1478846753.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:53.909Z,1478846753.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:53.924Z,1478846753.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:54.310Z,1478846754.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:54.333Z,1478846754.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:54.708Z,1478846754.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:54.736Z,1478846754.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:55.113Z,1478846755.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:55.128Z,1478846755.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:55.501Z,1478846755.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:55.533Z,1478846755.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:55.901Z,1478846755.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:55.928Z,1478846755.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:56.301Z,1478846756.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:56.335Z,1478846756.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:56.701Z,1478846756.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:56.741Z,1478846756.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:57.101Z,1478846757.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:57.127Z,1478846757.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:57.516Z,1478846757.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:57.533Z,1478846757.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:57.901Z,1478846757.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:57.935Z,1478846757.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:58.301Z,1478846758.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:58.338Z,1478846758.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:58.701Z,1478846758.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:58.732Z,1478846758.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:59.101Z,1478846759.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:59.136Z,1478846759.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:59.501Z,1478846759.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:59.533Z,1478846759.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:45:59.905Z,1478846759.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:45:59.930Z,1478846759.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:00.328Z,1478846760.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:00.343Z,1478846760.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:00.689Z,1478846760.689 [NAL9602](INFO): NAL9602 initialized
2016-11-11T06:46:00.705Z,1478846760.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:00.745Z,1478846760.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:01.101Z,1478846761.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:01.133Z,1478846761.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:01.512Z,1478846761.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:01.538Z,1478846761.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:01.916Z,1478846761.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:01.949Z,1478846761.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:02.316Z,1478846762.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:02.357Z,1478846762.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:02.705Z,1478846762.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:02.745Z,1478846762.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:03.101Z,1478846763.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:03.116Z,1478846763.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:03.502Z,1478846763.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:03.557Z,1478846763.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:03.904Z,1478846763.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:03.936Z,1478846763.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:04.301Z,1478846764.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:04.333Z,1478846764.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:04.710Z,1478846764.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:04.745Z,1478846764.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:05.101Z,1478846765.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:05.157Z,1478846765.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:05.501Z,1478846765.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:05.541Z,1478846765.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:05.905Z,1478846765.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:05.950Z,1478846765.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:06.309Z,1478846766.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:06.340Z,1478846766.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:06.704Z,1478846766.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:06.761Z,1478846766.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:07.105Z,1478846767.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:07.165Z,1478846767.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:07.505Z,1478846767.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:07.520Z,1478846767.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:07.909Z,1478846767.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:07.924Z,1478846767.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:08.309Z,1478846768.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:08.324Z,1478846768.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:08.709Z,1478846768.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:08.724Z,1478846768.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:09.108Z,1478846769.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:09.123Z,1478846769.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:09.514Z,1478846769.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:09.529Z,1478846769.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:09.904Z,1478846769.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:09.927Z,1478846769.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:10.308Z,1478846770.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:10.324Z,1478846770.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:10.709Z,1478846770.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:10.729Z,1478846770.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:11.105Z,1478846771.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:11.127Z,1478846771.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:11.508Z,1478846771.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:11.524Z,1478846771.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:11.916Z,1478846771.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:11.942Z,1478846771.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:12.301Z,1478846772.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:12.333Z,1478846772.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:12.701Z,1478846772.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:12.734Z,1478846772.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:13.101Z,1478846773.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:13.134Z,1478846773.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:13.502Z,1478846773.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:13.533Z,1478846773.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:13.901Z,1478846773.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:13.937Z,1478846773.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:14.301Z,1478846774.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:14.334Z,1478846774.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:14.702Z,1478846774.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:14.741Z,1478846774.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:15.105Z,1478846775.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:15.120Z,1478846775.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:15.505Z,1478846775.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:15.525Z,1478846775.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:15.906Z,1478846775.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:15.926Z,1478846775.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:16.308Z,1478846776.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:16.324Z,1478846776.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:16.704Z,1478846776.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:16.737Z,1478846776.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:17.105Z,1478846777.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:17.133Z,1478846777.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:17.509Z,1478846777.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:17.524Z,1478846777.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:17.918Z,1478846777.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:17.933Z,1478846777.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:18.301Z,1478846778.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:18.361Z,1478846778.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:18.705Z,1478846778.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:18.730Z,1478846778.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:19.110Z,1478846779.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:19.141Z,1478846779.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:19.501Z,1478846779.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:19.549Z,1478846779.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:19.549Z,1478846779.549 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2016-11-11T06:46:19.549Z,1478846779.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:46:19.564Z,1478846779.564 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:19.564Z,1478846779.564 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2016-11-11T06:46:19.564Z,1478846779.564 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:46:19.595Z,1478846779.595 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:46:19.596Z,1478846779.596 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:46:19.901Z,1478846779.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:19.962Z,1478846779.962 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:46:19.962Z,1478846779.962 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2016-11-11T06:46:19.963Z,1478846779.963 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:46:19.967Z,1478846779.967 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2016-11-11T06:46:20.306Z,1478846780.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:20.320Z,1478846780.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:46:20.320Z,1478846780.320 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:46:20.321Z,1478846780.321 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:46:20.326Z,1478846780.326 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:46:20.326Z,1478846780.326 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:46:20.326Z,1478846780.326 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:46:20.709Z,1478846780.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:20.765Z,1478846780.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:46:20.766Z,1478846780.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:21.108Z,1478846781.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:21.123Z,1478846781.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:46:21.124Z,1478846781.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:21.504Z,1478846781.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:21.553Z,1478846781.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:46:21.554Z,1478846781.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:21.907Z,1478846781.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:21.922Z,1478846781.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T06:46:21.923Z,1478846781.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:22.308Z,1478846782.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:22.359Z,1478846782.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T06:46:22.360Z,1478846782.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:22.710Z,1478846782.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:22.733Z,1478846782.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T06:46:22.734Z,1478846782.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:23.104Z,1478846783.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:23.135Z,1478846783.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T06:46:23.137Z,1478846783.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:23.501Z,1478846783.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:23.533Z,1478846783.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T06:46:23.534Z,1478846783.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:23.902Z,1478846783.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:23.941Z,1478846783.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T06:46:23.942Z,1478846783.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:24.301Z,1478846784.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:24.326Z,1478846784.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T06:46:24.327Z,1478846784.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:24.334Z,1478846784.334 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:24.334Z,1478846784.334 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 20
2016-11-11T06:46:24.335Z,1478846784.335 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:46:24.349Z,1478846784.349 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:46:24.701Z,1478846784.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:24.733Z,1478846784.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T06:46:24.734Z,1478846784.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:24.753Z,1478846784.753 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:46:24.753Z,1478846784.753 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 20
2016-11-11T06:46:25.106Z,1478846785.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:25.137Z,1478846785.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T06:46:25.138Z,1478846785.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:25.152Z,1478846785.152 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:46:25.152Z,1478846785.152 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:46:25.153Z,1478846785.153 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:46:25.501Z,1478846785.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:25.537Z,1478846785.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T06:46:25.538Z,1478846785.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:25.907Z,1478846785.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:25.922Z,1478846785.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T06:46:25.923Z,1478846785.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:26.302Z,1478846786.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:26.317Z,1478846786.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T06:46:26.318Z,1478846786.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:26.706Z,1478846786.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:26.736Z,1478846786.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T06:46:26.737Z,1478846786.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:27.108Z,1478846787.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:27.123Z,1478846787.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T06:46:27.124Z,1478846787.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:27.509Z,1478846787.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:27.532Z,1478846787.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T06:46:27.533Z,1478846787.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:27.901Z,1478846787.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:27.933Z,1478846787.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T06:46:27.934Z,1478846787.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:28.301Z,1478846788.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:28.333Z,1478846788.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T06:46:28.334Z,1478846788.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:28.719Z,1478846788.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:28.734Z,1478846788.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T06:46:28.734Z,1478846788.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:29.101Z,1478846789.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:29.133Z,1478846789.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T06:46:29.134Z,1478846789.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:29.505Z,1478846789.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:29.530Z,1478846789.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T06:46:29.531Z,1478846789.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:29.910Z,1478846789.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:29.945Z,1478846789.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T06:46:29.946Z,1478846789.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:30.306Z,1478846790.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:30.325Z,1478846790.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T06:46:30.326Z,1478846790.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:30.710Z,1478846790.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:30.737Z,1478846790.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T06:46:30.738Z,1478846790.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:31.104Z,1478846791.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:31.137Z,1478846791.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T06:46:31.138Z,1478846791.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:31.504Z,1478846791.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:31.531Z,1478846791.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T06:46:31.532Z,1478846791.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:31.908Z,1478846791.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:31.931Z,1478846791.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T06:46:31.933Z,1478846791.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:32.301Z,1478846792.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:32.328Z,1478846792.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T06:46:32.329Z,1478846792.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:32.693Z,1478846792.693 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-11T06:46:32.771Z,1478846792.771 [NAL9602](FAULT): received: 
+CSQ:1

OK0, 2, 0, 0, 0

OK
2016-11-11T06:46:32.771Z,1478846792.771 [NAL9602] Data Fault, FailCount= 1
2016-11-11T06:46:32.771Z,1478846792.771 [NAL9602](ERROR): Data Fault
2016-11-11T06:46:32.789Z,1478846792.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:32.838Z,1478846792.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2016-11-11T06:46:32.839Z,1478846792.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:32.891Z,1478846792.891 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T06:46:33.084Z,1478846793.085 [NAL9602](INFO): Powering down
2016-11-11T06:46:33.103Z,1478846793.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:33.134Z,1478846793.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T06:46:33.135Z,1478846793.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:33.502Z,1478846793.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:33.549Z,1478846793.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T06:46:33.550Z,1478846793.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:33.901Z,1478846793.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:33.935Z,1478846793.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T06:46:33.936Z,1478846793.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:33.955Z,1478846793.955 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T06:46:33.955Z,1478846793.955 [NAL9602] No Fault, FailCount= 1
2016-11-11T06:46:34.307Z,1478846794.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:34.352Z,1478846794.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T06:46:34.353Z,1478846794.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:34.704Z,1478846794.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:34.721Z,1478846794.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T06:46:34.722Z,1478846794.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:35.108Z,1478846795.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:35.155Z,1478846795.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T06:46:35.156Z,1478846795.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:35.508Z,1478846795.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:35.560Z,1478846795.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T06:46:35.561Z,1478846795.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:35.908Z,1478846795.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:35.929Z,1478846795.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T06:46:35.930Z,1478846795.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:36.308Z,1478846796.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:36.322Z,1478846796.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T06:46:36.323Z,1478846796.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:36.708Z,1478846796.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:36.723Z,1478846796.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T06:46:36.724Z,1478846796.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:37.108Z,1478846797.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:37.122Z,1478846797.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T06:46:37.123Z,1478846797.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:37.509Z,1478846797.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:37.528Z,1478846797.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T06:46:37.529Z,1478846797.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:37.901Z,1478846797.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:37.936Z,1478846797.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T06:46:37.937Z,1478846797.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:38.285Z,1478846798.285 [NAL9602](INFO): Powering up NAL9602
2016-11-11T06:46:38.301Z,1478846798.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:38.336Z,1478846798.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T06:46:38.338Z,1478846798.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:38.701Z,1478846798.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:38.733Z,1478846798.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T06:46:38.734Z,1478846798.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:39.101Z,1478846799.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:39.141Z,1478846799.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T06:46:39.142Z,1478846799.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:39.501Z,1478846799.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:39.520Z,1478846799.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2016-11-11T06:46:39.521Z,1478846799.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:39.901Z,1478846799.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:39.921Z,1478846799.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:40.301Z,1478846800.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:40.321Z,1478846800.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:40.704Z,1478846800.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:40.719Z,1478846800.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:41.108Z,1478846801.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:41.123Z,1478846801.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:41.508Z,1478846801.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:41.523Z,1478846801.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:41.911Z,1478846801.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:41.933Z,1478846801.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:42.311Z,1478846802.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:42.338Z,1478846802.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:42.708Z,1478846802.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:42.729Z,1478846802.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:43.101Z,1478846803.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:43.134Z,1478846803.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:43.501Z,1478846803.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:43.535Z,1478846803.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:43.901Z,1478846803.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:43.937Z,1478846803.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:44.301Z,1478846804.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:44.336Z,1478846804.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:44.701Z,1478846804.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:44.746Z,1478846804.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:45.101Z,1478846805.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:45.121Z,1478846805.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:45.501Z,1478846805.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:45.521Z,1478846805.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:45.905Z,1478846805.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:45.925Z,1478846805.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:46.307Z,1478846806.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:46.381Z,1478846806.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:46.708Z,1478846806.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:46.729Z,1478846806.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:50.114Z,1478846810.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:50.159Z,1478846810.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:50.268Z,1478846810.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:50.283Z,1478846810.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:50.597Z,1478846810.597 [NAL9602](INFO): NAL9602 initialized
2016-11-11T06:46:50.620Z,1478846810.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:50.673Z,1478846810.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:51.023Z,1478846811.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:51.073Z,1478846811.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:51.427Z,1478846811.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:51.442Z,1478846811.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:51.828Z,1478846811.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:51.843Z,1478846811.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:52.227Z,1478846812.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:52.249Z,1478846812.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:52.609Z,1478846812.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:52.637Z,1478846812.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:53.010Z,1478846813.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:53.042Z,1478846813.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:53.428Z,1478846813.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:53.443Z,1478846813.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:53.833Z,1478846813.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:53.848Z,1478846813.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:54.232Z,1478846814.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:54.247Z,1478846814.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:54.609Z,1478846814.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:54.652Z,1478846814.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:55.009Z,1478846815.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:55.025Z,1478846815.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:55.413Z,1478846815.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:55.449Z,1478846815.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:55.813Z,1478846815.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:55.833Z,1478846815.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:56.213Z,1478846816.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:56.229Z,1478846816.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:56.617Z,1478846816.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:56.637Z,1478846816.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:57.017Z,1478846817.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:57.032Z,1478846817.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:57.416Z,1478846817.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:57.432Z,1478846817.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:57.820Z,1478846817.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:57.836Z,1478846817.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:58.226Z,1478846818.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:58.245Z,1478846818.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:58.632Z,1478846818.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:58.647Z,1478846818.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:59.034Z,1478846819.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:59.050Z,1478846819.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:59.431Z,1478846819.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:59.453Z,1478846819.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:46:59.809Z,1478846819.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:46:59.833Z,1478846819.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:00.213Z,1478846820.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:00.246Z,1478846820.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:00.613Z,1478846820.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:00.649Z,1478846820.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:01.043Z,1478846821.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:01.067Z,1478846821.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:01.422Z,1478846821.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:01.445Z,1478846821.445 [BPC1](ERROR): Failed to parse message.
2016-11-11T06:47:01.445Z,1478846821.445 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T06:47:01.445Z,1478846821.445 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:47:01.445Z,1478846821.445 [BPC1](ERROR): Data Fault
2016-11-11T06:47:01.457Z,1478846821.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:01.502Z,1478846821.502 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:47:01.821Z,1478846821.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:01.848Z,1478846821.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:02.219Z,1478846822.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:02.234Z,1478846822.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:02.618Z,1478846822.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:02.633Z,1478846822.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:02.681Z,1478846822.681 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:47:02.682Z,1478846822.681 [BPC1] No Fault, FailCount= 1
2016-11-11T06:47:03.026Z,1478846823.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:03.099Z,1478846823.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:03.429Z,1478846823.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:03.460Z,1478846823.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:03.821Z,1478846823.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:03.869Z,1478846823.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:04.232Z,1478846824.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:04.247Z,1478846824.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:04.636Z,1478846824.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:04.651Z,1478846824.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:05.042Z,1478846825.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:05.081Z,1478846825.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:05.409Z,1478846825.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:05.438Z,1478846825.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:05.817Z,1478846825.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:05.849Z,1478846825.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:06.225Z,1478846826.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:06.249Z,1478846826.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:06.654Z,1478846826.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:06.693Z,1478846826.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:07.021Z,1478846827.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:07.036Z,1478846827.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:07.412Z,1478846827.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:07.440Z,1478846827.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:07.825Z,1478846827.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:07.840Z,1478846827.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:08.218Z,1478846828.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:08.233Z,1478846828.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:08.632Z,1478846828.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:08.660Z,1478846828.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:09.027Z,1478846829.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:09.042Z,1478846829.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:09.433Z,1478846829.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:09.448Z,1478846829.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:09.824Z,1478846829.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:09.854Z,1478846829.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:10.213Z,1478846830.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:10.245Z,1478846830.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:10.609Z,1478846830.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:10.641Z,1478846830.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:11.013Z,1478846831.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:11.046Z,1478846831.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:11.409Z,1478846831.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:11.446Z,1478846831.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:11.814Z,1478846831.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:11.849Z,1478846831.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:12.209Z,1478846832.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:12.245Z,1478846832.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:12.613Z,1478846832.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:12.633Z,1478846832.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:13.014Z,1478846833.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:13.034Z,1478846833.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:13.420Z,1478846833.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:13.441Z,1478846833.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:13.823Z,1478846833.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:13.845Z,1478846833.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:14.227Z,1478846834.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:14.242Z,1478846834.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:14.628Z,1478846834.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:14.697Z,1478846834.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:15.035Z,1478846835.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:15.057Z,1478846835.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:15.410Z,1478846835.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:15.457Z,1478846835.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:15.809Z,1478846835.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:15.845Z,1478846835.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:16.209Z,1478846836.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:16.261Z,1478846836.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:16.613Z,1478846836.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:16.665Z,1478846836.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:17.009Z,1478846837.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:17.049Z,1478846837.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:17.413Z,1478846837.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:17.449Z,1478846837.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:17.847Z,1478846837.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:17.871Z,1478846837.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:18.218Z,1478846838.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:18.257Z,1478846838.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:18.620Z,1478846838.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:18.635Z,1478846838.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:19.031Z,1478846839.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:19.046Z,1478846839.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:19.426Z,1478846839.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:19.450Z,1478846839.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:19.839Z,1478846839.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:19.861Z,1478846839.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:20.232Z,1478846840.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:20.248Z,1478846840.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:20.609Z,1478846840.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:20.642Z,1478846840.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:21.017Z,1478846841.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:21.051Z,1478846841.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:21.417Z,1478846841.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:21.457Z,1478846841.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:21.847Z,1478846841.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:21.875Z,1478846841.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:22.209Z,1478846842.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:22.229Z,1478846842.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:22.618Z,1478846842.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:22.633Z,1478846842.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:23.021Z,1478846843.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:23.061Z,1478846843.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:23.438Z,1478846843.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:23.464Z,1478846843.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:23.822Z,1478846843.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:23.837Z,1478846843.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:24.224Z,1478846844.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:24.239Z,1478846844.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:24.632Z,1478846844.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:24.647Z,1478846844.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:25.017Z,1478846845.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:25.033Z,1478846845.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:25.416Z,1478846845.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:25.441Z,1478846845.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:25.817Z,1478846845.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:25.839Z,1478846845.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:26.213Z,1478846846.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:26.237Z,1478846846.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:26.612Z,1478846846.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:26.645Z,1478846846.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:27.021Z,1478846847.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:27.041Z,1478846847.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:27.410Z,1478846847.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:27.498Z,1478846847.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:27.809Z,1478846847.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:27.825Z,1478846847.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:28.228Z,1478846848.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:28.298Z,1478846848.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:28.628Z,1478846848.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:28.665Z,1478846848.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:29.013Z,1478846849.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:29.063Z,1478846849.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:29.413Z,1478846849.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:29.461Z,1478846849.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:29.813Z,1478846849.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:29.828Z,1478846849.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:30.213Z,1478846850.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:30.236Z,1478846850.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:30.620Z,1478846850.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:30.635Z,1478846850.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:31.018Z,1478846851.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:31.033Z,1478846851.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:31.412Z,1478846851.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:31.444Z,1478846851.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:31.821Z,1478846851.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:31.836Z,1478846851.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:32.209Z,1478846852.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:32.249Z,1478846852.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:32.609Z,1478846852.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:32.637Z,1478846852.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:33.013Z,1478846853.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:33.049Z,1478846853.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:33.409Z,1478846853.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:33.449Z,1478846853.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:33.809Z,1478846853.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:33.829Z,1478846853.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:34.221Z,1478846854.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:34.257Z,1478846854.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:34.650Z,1478846854.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:34.669Z,1478846854.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:35.018Z,1478846855.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:35.049Z,1478846855.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:35.417Z,1478846855.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:35.439Z,1478846855.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:35.822Z,1478846855.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:35.837Z,1478846855.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:36.225Z,1478846856.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:36.245Z,1478846856.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:36.621Z,1478846856.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:36.645Z,1478846856.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:37.033Z,1478846857.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:37.048Z,1478846857.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:37.420Z,1478846857.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:37.457Z,1478846857.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:37.821Z,1478846857.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:37.847Z,1478846857.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:38.218Z,1478846858.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:38.249Z,1478846858.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:38.630Z,1478846858.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:38.670Z,1478846858.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:39.018Z,1478846859.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:39.034Z,1478846859.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:39.426Z,1478846859.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:39.453Z,1478846859.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:39.825Z,1478846859.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:39.840Z,1478846859.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:40.246Z,1478846860.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:40.333Z,1478846860.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:40.618Z,1478846860.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:40.633Z,1478846860.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:41.028Z,1478846861.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:41.085Z,1478846861.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:41.428Z,1478846861.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:41.464Z,1478846861.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:41.817Z,1478846861.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:41.869Z,1478846861.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:42.221Z,1478846862.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:42.277Z,1478846862.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:42.615Z,1478846862.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:42.637Z,1478846862.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:43.017Z,1478846863.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:43.032Z,1478846863.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:43.412Z,1478846863.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:43.452Z,1478846863.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:43.813Z,1478846863.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:43.845Z,1478846863.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:44.218Z,1478846864.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:44.234Z,1478846864.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:44.612Z,1478846864.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:44.645Z,1478846864.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:45.009Z,1478846865.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:45.035Z,1478846865.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:45.433Z,1478846865.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:45.448Z,1478846865.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:45.824Z,1478846865.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:45.855Z,1478846865.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:46.235Z,1478846866.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:46.250Z,1478846866.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:46.632Z,1478846866.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:46.660Z,1478846866.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:47.014Z,1478846867.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:47.069Z,1478846867.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:50.280Z,1478846870.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:50.306Z,1478846870.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:50.432Z,1478846870.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:50.463Z,1478846870.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:50.772Z,1478846870.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:50.811Z,1478846870.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:51.171Z,1478846871.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:51.187Z,1478846871.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:51.562Z,1478846871.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:51.582Z,1478846871.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:51.954Z,1478846871.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:51.981Z,1478846871.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:52.354Z,1478846872.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:52.382Z,1478846872.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:52.758Z,1478846872.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:52.794Z,1478846872.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:53.153Z,1478846873.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:53.208Z,1478846873.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:53.553Z,1478846873.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:53.585Z,1478846873.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:53.953Z,1478846873.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:53.993Z,1478846873.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:54.357Z,1478846874.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:54.410Z,1478846874.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:54.761Z,1478846874.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:54.777Z,1478846874.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:55.168Z,1478846875.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:55.217Z,1478846875.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:55.572Z,1478846875.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:55.614Z,1478846875.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:55.972Z,1478846875.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:56.000Z,1478846876.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:56.364Z,1478846876.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:56.380Z,1478846876.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:56.760Z,1478846876.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:56.775Z,1478846876.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:57.156Z,1478846877.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:57.180Z,1478846877.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:57.556Z,1478846877.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:57.588Z,1478846877.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:57.953Z,1478846877.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:57.987Z,1478846877.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:58.353Z,1478846878.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:58.392Z,1478846878.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:58.753Z,1478846878.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:58.785Z,1478846878.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:59.153Z,1478846879.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:59.187Z,1478846879.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:59.553Z,1478846879.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:59.581Z,1478846879.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:47:59.953Z,1478846879.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:47:59.989Z,1478846879.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:00.375Z,1478846880.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:00.397Z,1478846880.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:00.776Z,1478846880.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:00.791Z,1478846880.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:01.167Z,1478846881.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:01.203Z,1478846881.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:01.563Z,1478846881.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:01.599Z,1478846881.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:01.959Z,1478846881.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:01.996Z,1478846881.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:02.353Z,1478846882.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:02.393Z,1478846882.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:02.753Z,1478846882.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:02.773Z,1478846882.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:03.157Z,1478846883.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:03.178Z,1478846883.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:03.578Z,1478846883.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:03.621Z,1478846883.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:03.959Z,1478846883.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:04.037Z,1478846884.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:04.359Z,1478846884.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:04.417Z,1478846884.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:04.755Z,1478846884.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:04.781Z,1478846884.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:05.162Z,1478846885.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:05.182Z,1478846885.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:05.573Z,1478846885.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:05.620Z,1478846885.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:05.973Z,1478846885.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:06.030Z,1478846886.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:06.380Z,1478846886.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:06.403Z,1478846886.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:06.774Z,1478846886.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:06.813Z,1478846886.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:07.161Z,1478846887.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:07.188Z,1478846887.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:07.562Z,1478846887.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:07.637Z,1478846887.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:07.956Z,1478846887.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:07.982Z,1478846887.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:08.357Z,1478846888.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:08.441Z,1478846888.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:08.755Z,1478846888.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:08.808Z,1478846888.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:09.162Z,1478846889.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:09.214Z,1478846889.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:09.555Z,1478846889.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:09.629Z,1478846889.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:09.955Z,1478846889.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:09.989Z,1478846889.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:10.358Z,1478846890.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:10.402Z,1478846890.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:10.780Z,1478846890.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:10.805Z,1478846890.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:11.165Z,1478846891.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:11.199Z,1478846891.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:11.568Z,1478846891.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:11.612Z,1478846891.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:11.976Z,1478846891.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:12.003Z,1478846892.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:12.361Z,1478846892.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:12.398Z,1478846892.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:12.763Z,1478846892.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:12.780Z,1478846892.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:13.165Z,1478846893.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:13.214Z,1478846893.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:13.554Z,1478846893.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:13.625Z,1478846893.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:13.953Z,1478846893.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:13.982Z,1478846893.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:14.378Z,1478846894.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:14.410Z,1478846894.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:14.757Z,1478846894.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:14.792Z,1478846894.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:15.167Z,1478846895.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:15.202Z,1478846895.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:15.558Z,1478846895.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:15.587Z,1478846895.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:15.981Z,1478846895.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:15.988Z,1478846895.988 [PNI_TCM](ERROR): CRC does not match. Expected:0x56815 got:0x49678
2016-11-11T06:48:16.013Z,1478846896.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:16.407Z,1478846896.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:16.459Z,1478846896.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:16.770Z,1478846896.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:16.822Z,1478846896.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:17.166Z,1478846897.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:17.194Z,1478846897.194 [PNI_TCM](ERROR): CRC does not match. Expected:0x50705 got:0x4512
2016-11-11T06:48:17.217Z,1478846897.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:17.558Z,1478846897.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:17.602Z,1478846897.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:17.954Z,1478846897.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:17.990Z,1478846897.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:18.364Z,1478846898.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:18.397Z,1478846898.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:18.769Z,1478846898.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:18.802Z,1478846898.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:19.156Z,1478846899.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:19.190Z,1478846899.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:19.555Z,1478846899.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:19.619Z,1478846899.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:19.958Z,1478846899.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:20.033Z,1478846900.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:20.357Z,1478846900.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:20.454Z,1478846900.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:20.775Z,1478846900.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:20.860Z,1478846900.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:21.174Z,1478846901.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:21.219Z,1478846901.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:21.568Z,1478846901.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:21.650Z,1478846901.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:21.979Z,1478846901.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:22.023Z,1478846902.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:22.376Z,1478846902.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:22.405Z,1478846902.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:22.754Z,1478846902.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:22.821Z,1478846902.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:23.159Z,1478846903.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:23.193Z,1478846903.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:23.554Z,1478846903.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:23.606Z,1478846903.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:23.955Z,1478846903.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:24.001Z,1478846904.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:24.353Z,1478846904.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:24.394Z,1478846904.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:24.753Z,1478846904.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:24.772Z,1478846904.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:25.160Z,1478846905.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:25.175Z,1478846905.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:25.564Z,1478846905.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:25.591Z,1478846905.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:25.963Z,1478846905.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:25.990Z,1478846905.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:26.374Z,1478846906.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:26.380Z,1478846906.381 [PNI_TCM](ERROR): CRC does not match. Expected:0x16993 got:0x32537
2016-11-11T06:48:26.417Z,1478846906.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:26.773Z,1478846906.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:26.793Z,1478846906.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:27.176Z,1478846907.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:27.191Z,1478846907.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:27.570Z,1478846907.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:27.599Z,1478846907.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:27.954Z,1478846907.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:27.992Z,1478846907.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:28.357Z,1478846908.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:28.389Z,1478846908.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:28.756Z,1478846908.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:28.793Z,1478846908.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:29.154Z,1478846909.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:29.190Z,1478846909.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:29.554Z,1478846909.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:29.605Z,1478846909.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:29.955Z,1478846909.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:29.989Z,1478846909.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:30.355Z,1478846910.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:30.371Z,1478846910.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:30.761Z,1478846910.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:30.788Z,1478846910.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:31.160Z,1478846911.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:31.176Z,1478846911.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:31.577Z,1478846911.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:31.608Z,1478846911.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:31.968Z,1478846911.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:31.986Z,1478846911.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:32.370Z,1478846912.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:32.386Z,1478846912.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:32.773Z,1478846912.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:32.789Z,1478846912.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:33.164Z,1478846913.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:33.179Z,1478846913.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:33.565Z,1478846913.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:33.585Z,1478846913.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:33.958Z,1478846913.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:33.993Z,1478846913.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:34.356Z,1478846914.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:34.389Z,1478846914.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:34.756Z,1478846914.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:34.810Z,1478846914.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:35.153Z,1478846915.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:35.189Z,1478846915.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:35.554Z,1478846915.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:35.572Z,1478846915.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:35.966Z,1478846915.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:35.994Z,1478846915.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:36.359Z,1478846916.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:36.413Z,1478846916.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:36.768Z,1478846916.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:36.783Z,1478846916.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:37.168Z,1478846917.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:37.213Z,1478846917.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:37.571Z,1478846917.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:37.586Z,1478846917.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:37.975Z,1478846917.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:38.024Z,1478846918.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:38.357Z,1478846918.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:38.417Z,1478846918.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:38.757Z,1478846918.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:38.789Z,1478846918.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:39.156Z,1478846919.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:39.183Z,1478846919.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:39.554Z,1478846919.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:39.585Z,1478846919.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:39.953Z,1478846919.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:39.979Z,1478846919.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:40.356Z,1478846920.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:40.390Z,1478846920.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:40.756Z,1478846920.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:40.801Z,1478846920.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:41.153Z,1478846921.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:41.173Z,1478846921.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:41.557Z,1478846921.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:41.572Z,1478846921.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:41.976Z,1478846921.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:41.991Z,1478846921.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:42.372Z,1478846922.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:42.388Z,1478846922.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:42.772Z,1478846922.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:42.799Z,1478846922.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:43.168Z,1478846923.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:43.183Z,1478846923.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:43.560Z,1478846923.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:43.576Z,1478846923.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:43.957Z,1478846923.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:43.972Z,1478846923.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:44.351Z,1478846924.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:44.367Z,1478846924.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:44.766Z,1478846924.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:44.789Z,1478846924.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:45.160Z,1478846925.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:45.174Z,1478846925.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:45.558Z,1478846925.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:45.574Z,1478846925.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:45.957Z,1478846925.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:45.972Z,1478846925.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:46.354Z,1478846926.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:46.387Z,1478846926.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:46.759Z,1478846926.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:46.775Z,1478846926.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:47.176Z,1478846927.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:47.191Z,1478846927.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:50.412Z,1478846930.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:50.473Z,1478846930.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:50.581Z,1478846930.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:50.613Z,1478846930.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:50.936Z,1478846930.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:50.952Z,1478846930.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:51.326Z,1478846931.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:51.341Z,1478846931.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:51.721Z,1478846931.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:51.773Z,1478846931.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:52.125Z,1478846932.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:52.141Z,1478846932.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:52.525Z,1478846932.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:52.578Z,1478846932.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:52.925Z,1478846932.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:52.973Z,1478846932.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:53.325Z,1478846933.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:53.341Z,1478846933.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:53.725Z,1478846933.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:53.740Z,1478846933.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:54.125Z,1478846934.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:54.141Z,1478846934.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:54.525Z,1478846934.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:54.541Z,1478846934.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:54.940Z,1478846934.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:54.961Z,1478846934.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:55.332Z,1478846935.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:55.348Z,1478846935.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:55.740Z,1478846935.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:55.755Z,1478846935.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:56.136Z,1478846936.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:56.150Z,1478846936.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:56.525Z,1478846936.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:56.541Z,1478846936.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:56.921Z,1478846936.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:56.941Z,1478846936.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:57.325Z,1478846937.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:57.340Z,1478846937.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:57.722Z,1478846937.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:57.752Z,1478846937.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:58.122Z,1478846938.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:58.141Z,1478846938.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:58.522Z,1478846938.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:58.573Z,1478846938.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:58.922Z,1478846938.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:58.949Z,1478846938.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:59.322Z,1478846939.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:59.341Z,1478846939.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:48:59.722Z,1478846939.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:48:59.752Z,1478846939.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:00.148Z,1478846940.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:00.177Z,1478846940.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:00.545Z,1478846940.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:00.574Z,1478846940.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:00.936Z,1478846940.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:00.977Z,1478846940.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:01.336Z,1478846941.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:01.357Z,1478846941.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:01.721Z,1478846941.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:01.753Z,1478846941.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:02.126Z,1478846942.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:02.151Z,1478846942.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:02.521Z,1478846942.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:02.553Z,1478846942.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:02.937Z,1478846942.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:02.957Z,1478846942.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:03.322Z,1478846943.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:03.353Z,1478846943.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:03.721Z,1478846943.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:03.757Z,1478846943.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:04.129Z,1478846944.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:04.155Z,1478846944.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:04.521Z,1478846944.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:04.558Z,1478846944.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:04.922Z,1478846944.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:04.983Z,1478846944.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:05.349Z,1478846945.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:05.369Z,1478846945.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:05.736Z,1478846945.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:05.785Z,1478846945.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:06.136Z,1478846946.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:06.159Z,1478846946.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:06.536Z,1478846946.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:06.593Z,1478846946.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:06.928Z,1478846946.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:06.974Z,1478846946.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:07.324Z,1478846947.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:07.349Z,1478846947.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:07.732Z,1478846947.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:07.748Z,1478846947.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:08.130Z,1478846948.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:08.149Z,1478846948.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:08.532Z,1478846948.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:08.548Z,1478846948.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:08.937Z,1478846948.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:08.952Z,1478846948.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:09.322Z,1478846949.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:09.362Z,1478846949.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:09.722Z,1478846949.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:09.753Z,1478846949.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:10.136Z,1478846950.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:10.152Z,1478846950.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:10.543Z,1478846950.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:10.558Z,1478846950.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:10.941Z,1478846950.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:10.973Z,1478846950.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:11.340Z,1478846951.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:11.365Z,1478846951.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:11.736Z,1478846951.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:11.771Z,1478846951.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:12.121Z,1478846952.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:12.161Z,1478846952.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:12.525Z,1478846952.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:12.565Z,1478846952.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:12.925Z,1478846952.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:12.945Z,1478846952.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:13.320Z,1478846953.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:13.348Z,1478846953.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:13.729Z,1478846953.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:13.749Z,1478846953.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:14.128Z,1478846954.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:14.149Z,1478846954.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:14.528Z,1478846954.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:14.544Z,1478846954.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:14.924Z,1478846954.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:14.952Z,1478846954.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:15.329Z,1478846955.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:15.345Z,1478846955.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:15.740Z,1478846955.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:15.760Z,1478846955.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:16.142Z,1478846956.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:16.157Z,1478846956.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:16.543Z,1478846956.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:16.561Z,1478846956.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:16.944Z,1478846956.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:16.969Z,1478846956.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:17.321Z,1478846957.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:17.353Z,1478846957.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:17.721Z,1478846957.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:17.754Z,1478846957.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:18.121Z,1478846958.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:18.130Z,1478846958.130 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T06:49:18.130Z,1478846958.130 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:49:18.131Z,1478846958.131 [BPC1](ERROR): Data Fault
2016-11-11T06:49:18.173Z,1478846958.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:18.218Z,1478846958.218 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:49:18.521Z,1478846958.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:18.553Z,1478846958.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:18.924Z,1478846958.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:18.945Z,1478846958.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:19.324Z,1478846959.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:19.361Z,1478846959.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:19.402Z,1478846959.402 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:49:19.402Z,1478846959.402 [BPC1] No Fault, FailCount= 1
2016-11-11T06:49:19.732Z,1478846959.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:19.809Z,1478846959.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:20.122Z,1478846960.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:20.170Z,1478846960.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:20.521Z,1478846960.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:20.557Z,1478846960.557 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:20.557Z,1478846960.557 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2016-11-11T06:49:20.557Z,1478846960.557 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:49:20.572Z,1478846960.572 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:20.572Z,1478846960.572 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2016-11-11T06:49:20.572Z,1478846960.572 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:49:20.604Z,1478846960.604 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:49:20.604Z,1478846960.604 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:49:20.952Z,1478846960.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:20.985Z,1478846960.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:49:20.985Z,1478846960.985 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2016-11-11T06:49:20.986Z,1478846960.986 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:49:20.986Z,1478846960.986 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2016-11-11T06:49:21.336Z,1478846961.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:21.369Z,1478846961.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:49:21.370Z,1478846961.370 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:49:21.370Z,1478846961.370 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:49:21.375Z,1478846961.375 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:49:21.375Z,1478846961.375 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:49:21.376Z,1478846961.376 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:49:21.736Z,1478846961.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:21.757Z,1478846961.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:49:21.758Z,1478846961.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:22.149Z,1478846962.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:22.164Z,1478846962.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:49:22.165Z,1478846962.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:22.529Z,1478846962.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:22.543Z,1478846962.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:49:22.544Z,1478846962.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:22.926Z,1478846962.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:22.941Z,1478846962.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T06:49:22.942Z,1478846962.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:23.329Z,1478846963.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:23.344Z,1478846963.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T06:49:23.345Z,1478846963.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:23.729Z,1478846963.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:23.743Z,1478846963.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T06:49:23.744Z,1478846963.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:24.125Z,1478846964.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:24.157Z,1478846964.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T06:49:24.158Z,1478846964.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:24.529Z,1478846964.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:24.544Z,1478846964.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T06:49:24.545Z,1478846964.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:24.929Z,1478846964.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:24.952Z,1478846964.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T06:49:24.953Z,1478846964.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:25.321Z,1478846965.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:25.350Z,1478846965.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T06:49:25.351Z,1478846965.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:25.364Z,1478846965.364 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:25.364Z,1478846965.364 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 21
2016-11-11T06:49:25.364Z,1478846965.364 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:49:25.391Z,1478846965.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:49:25.721Z,1478846965.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:25.758Z,1478846965.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T06:49:25.760Z,1478846965.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:25.779Z,1478846965.779 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:49:25.779Z,1478846965.779 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 21
2016-11-11T06:49:26.144Z,1478846966.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:26.169Z,1478846966.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T06:49:26.170Z,1478846966.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:26.175Z,1478846966.175 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:49:26.176Z,1478846966.176 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:49:26.176Z,1478846966.176 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:49:26.532Z,1478846966.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:26.569Z,1478846966.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T06:49:26.570Z,1478846966.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:26.936Z,1478846966.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:26.962Z,1478846966.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T06:49:26.963Z,1478846966.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:27.332Z,1478846967.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:27.366Z,1478846967.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T06:49:27.368Z,1478846967.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:27.721Z,1478846967.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:27.741Z,1478846967.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T06:49:27.742Z,1478846967.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:28.121Z,1478846968.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:28.153Z,1478846968.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T06:49:28.154Z,1478846968.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:28.529Z,1478846968.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:28.544Z,1478846968.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T06:49:28.545Z,1478846968.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:28.931Z,1478846968.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:28.947Z,1478846968.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T06:49:28.948Z,1478846968.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:29.335Z,1478846969.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:29.350Z,1478846969.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T06:49:29.351Z,1478846969.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:29.729Z,1478846969.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:29.748Z,1478846969.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T06:49:29.749Z,1478846969.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:30.137Z,1478846970.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:30.157Z,1478846970.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T06:49:30.158Z,1478846970.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:30.537Z,1478846970.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:30.557Z,1478846970.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T06:49:30.558Z,1478846970.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:30.922Z,1478846970.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:30.957Z,1478846970.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T06:49:30.959Z,1478846970.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:31.343Z,1478846971.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:31.352Z,1478846971.352 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T06:49:31.352Z,1478846971.352 [BPC1] Data Fault, FailCount= 2
2016-11-11T06:49:31.352Z,1478846971.352 [BPC1](ERROR): Data Fault
2016-11-11T06:49:31.360Z,1478846971.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T06:49:31.361Z,1478846971.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:31.382Z,1478846971.382 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:49:31.743Z,1478846971.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:31.765Z,1478846971.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T06:49:31.766Z,1478846971.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:32.135Z,1478846972.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:32.169Z,1478846972.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T06:49:32.170Z,1478846972.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:32.532Z,1478846972.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:32.566Z,1478846972.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T06:49:32.567Z,1478846972.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:32.595Z,1478846972.595 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:49:32.595Z,1478846972.595 [BPC1] No Fault, FailCount= 2
2016-11-11T06:49:32.921Z,1478846972.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:32.998Z,1478846972.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T06:49:32.000Z,1478846973.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:33.328Z,1478846973.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:33.372Z,1478846973.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T06:49:33.373Z,1478846973.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:33.726Z,1478846973.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:33.745Z,1478846973.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T06:49:33.746Z,1478846973.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:34.128Z,1478846974.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:34.143Z,1478846974.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T06:49:34.144Z,1478846974.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:34.528Z,1478846974.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:34.543Z,1478846974.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T06:49:34.544Z,1478846974.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:34.928Z,1478846974.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:34.987Z,1478846974.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T06:49:34.988Z,1478846974.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:35.321Z,1478846975.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:35.353Z,1478846975.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T06:49:35.354Z,1478846975.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:35.725Z,1478846975.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:35.751Z,1478846975.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T06:49:35.752Z,1478846975.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:36.121Z,1478846976.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:36.157Z,1478846976.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T06:49:36.158Z,1478846976.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:36.547Z,1478846976.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:36.561Z,1478846976.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T06:49:36.562Z,1478846976.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:36.944Z,1478846976.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:36.959Z,1478846976.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T06:49:36.960Z,1478846976.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:37.340Z,1478846977.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:37.372Z,1478846977.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T06:49:37.373Z,1478846977.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:37.732Z,1478846977.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:37.756Z,1478846977.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T06:49:37.757Z,1478846977.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:38.121Z,1478846978.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:38.148Z,1478846978.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T06:49:38.149Z,1478846978.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:38.521Z,1478846978.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:38.561Z,1478846978.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T06:49:38.562Z,1478846978.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:38.921Z,1478846978.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:38.941Z,1478846978.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T06:49:38.942Z,1478846978.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:39.321Z,1478846979.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:39.340Z,1478846979.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T06:49:39.341Z,1478846979.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:39.725Z,1478846979.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:39.745Z,1478846979.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T06:49:39.746Z,1478846979.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:40.124Z,1478846980.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:40.144Z,1478846980.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T06:49:40.145Z,1478846980.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:40.529Z,1478846980.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:40.543Z,1478846980.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2016-11-11T06:49:40.544Z,1478846980.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:40.924Z,1478846980.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:40.957Z,1478846980.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:41.328Z,1478846981.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:41.343Z,1478846981.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:41.739Z,1478846981.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:41.757Z,1478846981.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:42.139Z,1478846982.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:42.155Z,1478846982.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:42.543Z,1478846982.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:42.565Z,1478846982.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:42.947Z,1478846982.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:42.969Z,1478846982.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:43.322Z,1478846983.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:43.354Z,1478846983.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:43.721Z,1478846983.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:43.757Z,1478846983.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:44.126Z,1478846984.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:44.157Z,1478846984.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:44.521Z,1478846984.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:44.561Z,1478846984.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:44.921Z,1478846984.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:44.941Z,1478846984.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:45.322Z,1478846985.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:45.385Z,1478846985.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:45.725Z,1478846985.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:45.773Z,1478846985.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:46.128Z,1478846986.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:46.149Z,1478846986.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:46.529Z,1478846986.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:46.544Z,1478846986.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:46.936Z,1478846986.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:46.988Z,1478846986.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:47.332Z,1478846987.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:47.349Z,1478846987.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:50.654Z,1478846990.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:50.706Z,1478846990.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:50.824Z,1478846990.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:50.857Z,1478846990.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:51.185Z,1478846991.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:51.241Z,1478846991.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:51.586Z,1478846991.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:51.601Z,1478846991.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:51.994Z,1478846991.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:52.010Z,1478846992.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:52.391Z,1478846992.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:52.414Z,1478846992.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:52.800Z,1478846992.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:52.821Z,1478846992.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:53.195Z,1478846993.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:53.211Z,1478846993.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:53.577Z,1478846993.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:53.602Z,1478846993.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:53.973Z,1478846993.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:54.005Z,1478846994.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:54.374Z,1478846994.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:54.398Z,1478846994.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:54.773Z,1478846994.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:54.816Z,1478846994.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:55.173Z,1478846995.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:55.217Z,1478846995.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:55.573Z,1478846995.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:55.589Z,1478846995.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:55.973Z,1478846995.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:55.993Z,1478846995.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:56.374Z,1478846996.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:56.393Z,1478846996.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:56.774Z,1478846996.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:56.789Z,1478846996.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:57.188Z,1478846997.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:57.216Z,1478846997.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:57.588Z,1478846997.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:57.627Z,1478846997.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:57.988Z,1478846997.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:58.019Z,1478846998.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:58.384Z,1478846998.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:58.399Z,1478846998.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:58.781Z,1478846998.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:58.796Z,1478846998.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:59.176Z,1478846999.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:59.209Z,1478846999.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:59.581Z,1478846999.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:49:59.596Z,1478846999.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:49:59.984Z,1478846999.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:00.014Z,1478847000.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:00.376Z,1478847000.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:00.408Z,1478847000.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:00.773Z,1478847000.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:00.798Z,1478847000.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:01.174Z,1478847001.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:01.200Z,1478847001.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:01.584Z,1478847001.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:01.604Z,1478847001.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:01.973Z,1478847001.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:01.998Z,1478847001.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:02.396Z,1478847002.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:02.417Z,1478847002.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:02.784Z,1478847002.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:02.810Z,1478847002.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:03.184Z,1478847003.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:03.241Z,1478847003.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:03.588Z,1478847003.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:03.641Z,1478847003.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:03.979Z,1478847003.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:03.998Z,1478847003.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:04.381Z,1478847004.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:04.437Z,1478847004.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:04.781Z,1478847004.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:04.796Z,1478847004.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:05.176Z,1478847005.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:05.223Z,1478847005.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:05.576Z,1478847005.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:05.614Z,1478847005.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:05.982Z,1478847005.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:05.997Z,1478847005.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:06.376Z,1478847006.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:06.408Z,1478847006.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:06.784Z,1478847006.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:06.799Z,1478847006.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:07.190Z,1478847007.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:07.213Z,1478847007.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:07.596Z,1478847007.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:07.611Z,1478847007.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:08.002Z,1478847008.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:08.017Z,1478847008.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:08.396Z,1478847008.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:08.422Z,1478847008.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:08.784Z,1478847008.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:08.819Z,1478847008.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:09.173Z,1478847009.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:09.215Z,1478847009.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:09.574Z,1478847009.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:09.589Z,1478847009.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:09.974Z,1478847009.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:10.016Z,1478847010.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:10.385Z,1478847010.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:10.400Z,1478847010.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:10.784Z,1478847010.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:10.800Z,1478847010.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:11.176Z,1478847011.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:11.204Z,1478847011.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:11.580Z,1478847011.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:11.601Z,1478847011.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:11.984Z,1478847011.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:12.004Z,1478847012.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:12.376Z,1478847012.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:12.409Z,1478847012.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:12.795Z,1478847012.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:12.817Z,1478847012.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:13.192Z,1478847013.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:13.224Z,1478847013.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:13.599Z,1478847013.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:13.614Z,1478847013.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:13.984Z,1478847013.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:14.014Z,1478847014.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:14.375Z,1478847014.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:14.402Z,1478847014.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:14.778Z,1478847014.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:14.809Z,1478847014.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:15.173Z,1478847015.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:15.193Z,1478847015.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:15.577Z,1478847015.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:15.593Z,1478847015.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:15.977Z,1478847015.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:15.993Z,1478847015.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:16.381Z,1478847016.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:16.396Z,1478847016.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:16.781Z,1478847016.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:16.801Z,1478847016.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:17.176Z,1478847017.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:17.233Z,1478847017.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:17.580Z,1478847017.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:17.614Z,1478847017.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:17.995Z,1478847017.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:18.014Z,1478847018.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:18.392Z,1478847018.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:18.421Z,1478847018.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:18.784Z,1478847018.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:18.848Z,1478847018.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:19.192Z,1478847019.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:19.223Z,1478847019.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:19.573Z,1478847019.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:19.621Z,1478847019.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:19.973Z,1478847019.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:20.025Z,1478847020.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:20.378Z,1478847020.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:20.410Z,1478847020.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:20.778Z,1478847020.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:20.809Z,1478847020.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:21.180Z,1478847021.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:21.195Z,1478847021.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:21.581Z,1478847021.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:21.604Z,1478847021.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:21.982Z,1478847021.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:21.997Z,1478847021.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:22.380Z,1478847022.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:22.397Z,1478847022.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:22.777Z,1478847022.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:22.801Z,1478847022.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:23.192Z,1478847023.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:23.220Z,1478847023.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:23.591Z,1478847023.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:23.607Z,1478847023.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:23.992Z,1478847023.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:24.020Z,1478847024.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:24.392Z,1478847024.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:24.413Z,1478847024.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:24.773Z,1478847024.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:24.808Z,1478847024.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:25.178Z,1478847025.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:25.204Z,1478847025.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:25.573Z,1478847025.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:25.606Z,1478847025.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:25.973Z,1478847025.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:26.010Z,1478847026.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:26.374Z,1478847026.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:26.402Z,1478847026.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:26.774Z,1478847026.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:26.798Z,1478847026.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:27.175Z,1478847027.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:27.214Z,1478847027.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:27.575Z,1478847027.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:27.617Z,1478847027.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:27.978Z,1478847027.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:27.993Z,1478847027.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:28.388Z,1478847028.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:28.422Z,1478847028.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:28.789Z,1478847028.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:28.816Z,1478847028.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:29.189Z,1478847029.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:29.216Z,1478847029.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:29.588Z,1478847029.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:29.632Z,1478847029.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:29.977Z,1478847029.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:29.998Z,1478847029.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:30.377Z,1478847030.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:30.396Z,1478847030.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:30.780Z,1478847030.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:30.795Z,1478847030.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:31.176Z,1478847031.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:31.205Z,1478847031.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:31.576Z,1478847031.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:31.604Z,1478847031.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:31.984Z,1478847031.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:31.999Z,1478847031.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:32.382Z,1478847032.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:32.449Z,1478847032.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:32.773Z,1478847032.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:32.805Z,1478847032.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:33.173Z,1478847033.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:33.221Z,1478847033.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:33.600Z,1478847033.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:33.614Z,1478847033.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:33.988Z,1478847033.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:34.047Z,1478847034.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:34.397Z,1478847034.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:34.450Z,1478847034.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:34.796Z,1478847034.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:34.825Z,1478847034.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:35.177Z,1478847035.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:35.201Z,1478847035.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:35.580Z,1478847035.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:35.595Z,1478847035.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:35.981Z,1478847035.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:36.001Z,1478847036.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:36.373Z,1478847036.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:36.405Z,1478847036.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:36.773Z,1478847036.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:36.807Z,1478847036.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:37.173Z,1478847037.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:37.208Z,1478847037.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:37.574Z,1478847037.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:37.605Z,1478847037.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:37.973Z,1478847037.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:38.007Z,1478847038.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:38.373Z,1478847038.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:38.400Z,1478847038.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:38.795Z,1478847038.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:38.810Z,1478847038.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:39.191Z,1478847039.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:39.213Z,1478847039.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:39.596Z,1478847039.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:39.611Z,1478847039.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:39.988Z,1478847039.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:40.014Z,1478847040.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:40.373Z,1478847040.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:40.408Z,1478847040.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:40.774Z,1478847040.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:40.812Z,1478847040.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:41.174Z,1478847041.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:41.209Z,1478847041.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:41.577Z,1478847041.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:41.612Z,1478847041.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:41.981Z,1478847041.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:41.996Z,1478847041.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:42.377Z,1478847042.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:42.397Z,1478847042.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:42.781Z,1478847042.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:42.796Z,1478847042.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:43.180Z,1478847043.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:43.195Z,1478847043.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:43.576Z,1478847043.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:43.609Z,1478847043.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:43.990Z,1478847043.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:44.009Z,1478847044.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:44.391Z,1478847044.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:44.413Z,1478847044.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:44.790Z,1478847044.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:44.822Z,1478847044.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:45.191Z,1478847045.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:45.200Z,1478847045.200 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T06:50:45.200Z,1478847045.200 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:50:45.200Z,1478847045.200 [BPC1](ERROR): Data Fault
2016-11-11T06:50:45.208Z,1478847045.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:45.255Z,1478847045.256 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:50:45.577Z,1478847045.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:45.604Z,1478847045.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:45.975Z,1478847045.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:46.000Z,1478847046.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:46.388Z,1478847046.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:46.403Z,1478847046.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:46.412Z,1478847046.412 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T06:45:46.1Z
2016-11-11T06:50:46.412Z,1478847046.412 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T06:50:46.412Z,1478847046.412 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T06:50:46.424Z,1478847046.424 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:50:46.424Z,1478847046.424 [BPC1] No Fault, FailCount= 1
2016-11-11T06:50:46.774Z,1478847046.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:46.850Z,1478847046.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:47.609Z,1478847047.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:47.665Z,1478847047.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:47.762Z,1478847047.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:47.794Z,1478847047.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:51.171Z,1478847051.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:51.186Z,1478847051.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:51.335Z,1478847051.335 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0048.lzma
2016-11-11T06:50:51.383Z,1478847051.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:51.404Z,1478847051.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:51.696Z,1478847051.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:51.732Z,1478847051.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:52.549Z,1478847052.549 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0048.lzma.bak
2016-11-11T06:50:52.550Z,1478847052.550 [DataOverHttps](INFO): SBD MOMSN=4555122
2016-11-11T06:50:52.591Z,1478847052.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:52.606Z,1478847052.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:53.569Z,1478847053.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:53.600Z,1478847053.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:53.698Z,1478847053.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:53.743Z,1478847053.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:57.073Z,1478847057.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:57.105Z,1478847057.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:57.212Z,1478847057.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:57.248Z,1478847057.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:57.576Z,1478847057.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:57.605Z,1478847057.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:57.976Z,1478847057.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:58.013Z,1478847058.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:58.360Z,1478847058.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:58.376Z,1478847058.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:50:58.761Z,1478847058.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:50:58.781Z,1478847058.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:02.025Z,1478847062.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:02.129Z,1478847062.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:02.180Z,1478847062.180 [DataOverHttps](INFO): Sending 337 bytes from file Logs/20161111T044527/Express0049.lzma
2016-11-11T06:51:02.225Z,1478847062.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:02.249Z,1478847062.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:02.613Z,1478847062.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:02.633Z,1478847062.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:02.969Z,1478847062.969 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0049.lzma.bak
2016-11-11T06:51:02.969Z,1478847062.969 [DataOverHttps](INFO): SBD MOMSN=4555124
2016-11-11T06:51:03.016Z,1478847063.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:03.065Z,1478847063.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:04.224Z,1478847064.224 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T06:51:04.241Z,1478847064.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:04.282Z,1478847064.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:04.293Z,1478847064.293 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T06:51:04.293Z,1478847064.293 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T06:51:04.293Z,1478847064.293 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T06:51:04.390Z,1478847064.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:04.453Z,1478847064.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:07.778Z,1478847067.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:07.829Z,1478847067.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:07.933Z,1478847067.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:07.975Z,1478847067.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:08.284Z,1478847068.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:08.303Z,1478847068.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:08.683Z,1478847068.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:08.732Z,1478847068.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:09.084Z,1478847069.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:09.109Z,1478847069.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:09.460Z,1478847069.460 [NAL9602](INFO): Powering down
2016-11-11T06:51:09.496Z,1478847069.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:09.532Z,1478847069.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:09.877Z,1478847069.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:09.928Z,1478847069.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:10.277Z,1478847070.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:10.312Z,1478847070.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:10.682Z,1478847070.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:10.745Z,1478847070.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:11.080Z,1478847071.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:11.101Z,1478847071.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:11.484Z,1478847071.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:11.510Z,1478847071.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:11.884Z,1478847071.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:11.913Z,1478847071.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:12.284Z,1478847072.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:12.347Z,1478847072.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:12.685Z,1478847072.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:12.708Z,1478847072.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:13.077Z,1478847073.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:13.113Z,1478847073.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:13.477Z,1478847073.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:13.514Z,1478847073.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:13.877Z,1478847073.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:13.912Z,1478847073.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:14.277Z,1478847074.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:14.315Z,1478847074.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:14.690Z,1478847074.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:14.705Z,1478847074.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:15.077Z,1478847075.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:15.113Z,1478847075.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:15.477Z,1478847075.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:15.511Z,1478847075.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:15.877Z,1478847075.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:15.911Z,1478847075.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:16.277Z,1478847076.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:16.305Z,1478847076.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:16.677Z,1478847076.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:16.695Z,1478847076.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:17.077Z,1478847077.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:17.095Z,1478847077.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:17.481Z,1478847077.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:17.498Z,1478847077.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:17.884Z,1478847077.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:17.901Z,1478847077.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:18.284Z,1478847078.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:18.309Z,1478847078.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:18.684Z,1478847078.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:18.702Z,1478847078.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:19.090Z,1478847079.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:19.105Z,1478847079.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:19.490Z,1478847079.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:19.505Z,1478847079.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:19.884Z,1478847079.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:19.949Z,1478847079.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:20.277Z,1478847080.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:20.312Z,1478847080.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:20.677Z,1478847080.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:20.725Z,1478847080.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:21.077Z,1478847081.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:21.109Z,1478847081.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:21.477Z,1478847081.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:21.522Z,1478847081.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:21.877Z,1478847081.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:21.925Z,1478847081.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:22.277Z,1478847082.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:22.312Z,1478847082.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:22.677Z,1478847082.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:22.694Z,1478847082.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:23.080Z,1478847083.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:23.101Z,1478847083.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:23.480Z,1478847083.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:23.546Z,1478847083.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:23.884Z,1478847083.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:23.932Z,1478847083.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:24.284Z,1478847084.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:24.303Z,1478847084.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:24.691Z,1478847084.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:24.707Z,1478847084.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:25.083Z,1478847085.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:25.106Z,1478847085.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:25.485Z,1478847085.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:25.505Z,1478847085.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:25.894Z,1478847085.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:25.910Z,1478847085.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:26.277Z,1478847086.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:26.320Z,1478847086.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:26.707Z,1478847086.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:26.733Z,1478847086.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:27.077Z,1478847087.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:27.133Z,1478847087.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:27.477Z,1478847087.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:27.510Z,1478847087.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:27.877Z,1478847087.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:27.919Z,1478847087.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:28.281Z,1478847088.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:28.319Z,1478847088.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:28.677Z,1478847088.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:28.737Z,1478847088.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:29.082Z,1478847089.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:29.119Z,1478847089.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:29.491Z,1478847089.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:29.522Z,1478847089.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:29.884Z,1478847089.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:29.905Z,1478847089.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:30.283Z,1478847090.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:30.305Z,1478847090.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:30.680Z,1478847090.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:30.708Z,1478847090.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:31.084Z,1478847091.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:31.134Z,1478847091.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:31.481Z,1478847091.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:31.504Z,1478847091.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:31.887Z,1478847091.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:31.904Z,1478847091.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:32.277Z,1478847092.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:32.295Z,1478847092.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:32.682Z,1478847092.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:32.725Z,1478847092.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:33.091Z,1478847093.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:33.106Z,1478847093.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:33.483Z,1478847093.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:33.530Z,1478847093.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:33.885Z,1478847093.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:33.934Z,1478847093.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:34.285Z,1478847094.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:34.319Z,1478847094.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:34.685Z,1478847094.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:34.742Z,1478847094.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:35.085Z,1478847095.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:35.102Z,1478847095.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:35.477Z,1478847095.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:35.541Z,1478847095.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:35.877Z,1478847095.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:35.937Z,1478847095.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:36.279Z,1478847096.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:36.335Z,1478847096.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:36.678Z,1478847096.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:36.709Z,1478847096.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:37.077Z,1478847097.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:37.105Z,1478847097.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:37.477Z,1478847097.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:37.495Z,1478847097.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:37.877Z,1478847097.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:37.911Z,1478847097.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:38.282Z,1478847098.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:38.313Z,1478847098.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:38.682Z,1478847098.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:38.701Z,1478847098.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:39.081Z,1478847099.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:39.100Z,1478847099.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:39.484Z,1478847099.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:39.506Z,1478847099.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:39.917Z,1478847099.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:39.999Z,1478847099.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:40.277Z,1478847100.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:40.316Z,1478847100.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:40.682Z,1478847100.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:40.701Z,1478847100.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:41.080Z,1478847101.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:41.099Z,1478847101.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:41.480Z,1478847101.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:41.500Z,1478847101.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:41.881Z,1478847101.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:41.903Z,1478847101.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:42.284Z,1478847102.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:42.301Z,1478847102.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:42.684Z,1478847102.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:42.788Z,1478847102.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:43.084Z,1478847103.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:43.109Z,1478847103.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:43.487Z,1478847103.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:43.516Z,1478847103.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:43.877Z,1478847103.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:43.949Z,1478847103.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:44.277Z,1478847104.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:44.319Z,1478847104.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:44.677Z,1478847104.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:44.725Z,1478847104.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:45.077Z,1478847105.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:45.117Z,1478847105.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:45.484Z,1478847105.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:45.541Z,1478847105.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:45.884Z,1478847105.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:45.906Z,1478847105.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:46.284Z,1478847106.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:46.309Z,1478847106.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:46.683Z,1478847106.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:46.708Z,1478847106.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:47.084Z,1478847107.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:47.109Z,1478847107.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:47.477Z,1478847107.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:47.507Z,1478847107.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:47.877Z,1478847107.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:47.953Z,1478847107.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:48.277Z,1478847108.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:48.329Z,1478847108.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:48.677Z,1478847108.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:48.703Z,1478847108.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:49.077Z,1478847109.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:49.119Z,1478847109.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:49.477Z,1478847109.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:49.521Z,1478847109.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:49.881Z,1478847109.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:49.915Z,1478847109.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:50.277Z,1478847110.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:50.330Z,1478847110.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:50.677Z,1478847110.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:50.730Z,1478847110.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:51.077Z,1478847111.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:51.094Z,1478847111.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:51.477Z,1478847111.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:51.495Z,1478847111.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:51.883Z,1478847111.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:51.900Z,1478847111.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:52.284Z,1478847112.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:52.302Z,1478847112.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:52.683Z,1478847112.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:52.705Z,1478847112.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:53.084Z,1478847113.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:53.105Z,1478847113.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:53.484Z,1478847113.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:53.509Z,1478847113.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:53.886Z,1478847113.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:53.903Z,1478847113.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:54.285Z,1478847114.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:54.302Z,1478847114.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:54.685Z,1478847114.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:54.702Z,1478847114.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:55.077Z,1478847115.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:55.113Z,1478847115.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:55.477Z,1478847115.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:55.513Z,1478847115.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:55.877Z,1478847115.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:55.917Z,1478847115.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:56.277Z,1478847116.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:56.309Z,1478847116.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:56.677Z,1478847116.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:56.756Z,1478847116.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:57.077Z,1478847117.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:57.112Z,1478847117.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:57.481Z,1478847117.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:57.524Z,1478847117.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:57.881Z,1478847117.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:57.917Z,1478847117.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:58.277Z,1478847118.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:58.296Z,1478847118.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:58.685Z,1478847118.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:58.708Z,1478847118.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:59.084Z,1478847119.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:59.105Z,1478847119.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:59.490Z,1478847119.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:59.506Z,1478847119.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:59.880Z,1478847119.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:51:59.919Z,1478847119.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:51:59.959Z,1478847119.958 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T06:51:59.959Z,1478847119.959 [Rowe_600LCM] No Fault, FailCount= 5
2016-11-11T06:52:00.277Z,1478847120.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:00.283Z,1478847120.283 [Rowe_600LCM](INFO): Initializing
2016-11-11T06:52:00.284Z,1478847120.284 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T06:52:00.284Z,1478847120.284 [Rowe_600LCM](INFO): LCM OK
2016-11-11T06:52:00.284Z,1478847120.284 [Rowe_600LCM](INFO): Powering up
2016-11-11T06:52:00.317Z,1478847120.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:00.677Z,1478847120.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:00.745Z,1478847120.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:01.088Z,1478847121.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:01.104Z,1478847121.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:01.484Z,1478847121.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:01.509Z,1478847121.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:01.901Z,1478847121.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:01.917Z,1478847121.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:02.308Z,1478847122.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:02.364Z,1478847122.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:02.677Z,1478847122.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:02.753Z,1478847122.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:03.080Z,1478847123.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:03.098Z,1478847123.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:03.479Z,1478847123.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:03.545Z,1478847123.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:03.883Z,1478847123.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:03.900Z,1478847123.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:04.285Z,1478847124.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:04.388Z,1478847124.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:04.515Z,1478847124.515 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T06:52:04.578Z,1478847124.578 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T06:52:04.580Z,1478847124.580 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T06:52:04.581Z,1478847124.581 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T06:52:04.582Z,1478847124.582 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T06:52:04.692Z,1478847124.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:04.759Z,1478847124.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:07.985Z,1478847127.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:08.002Z,1478847128.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:08.113Z,1478847128.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:08.137Z,1478847128.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:08.505Z,1478847128.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:08.525Z,1478847128.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:08.904Z,1478847128.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:08.919Z,1478847128.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:09.303Z,1478847129.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:09.322Z,1478847129.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:09.705Z,1478847129.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:09.725Z,1478847129.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:10.104Z,1478847130.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:10.119Z,1478847130.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:10.505Z,1478847130.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:10.521Z,1478847130.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:10.897Z,1478847130.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:10.929Z,1478847130.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:11.297Z,1478847131.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:11.356Z,1478847131.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:11.706Z,1478847131.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:11.753Z,1478847131.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:12.097Z,1478847132.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:12.133Z,1478847132.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:12.501Z,1478847132.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:12.537Z,1478847132.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:12.897Z,1478847132.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:12.913Z,1478847132.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:13.301Z,1478847133.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:13.344Z,1478847133.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:13.705Z,1478847133.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:13.742Z,1478847133.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:14.097Z,1478847134.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:14.117Z,1478847134.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:14.502Z,1478847134.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:14.518Z,1478847134.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:14.904Z,1478847134.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:14.919Z,1478847134.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:15.305Z,1478847135.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:15.320Z,1478847135.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:15.704Z,1478847135.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:15.725Z,1478847135.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:16.104Z,1478847136.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:16.119Z,1478847136.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:16.512Z,1478847136.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:16.585Z,1478847136.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:16.912Z,1478847136.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:16.928Z,1478847136.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:17.297Z,1478847137.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:17.330Z,1478847137.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:17.697Z,1478847137.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:17.750Z,1478847137.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:18.097Z,1478847138.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:18.122Z,1478847138.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:18.497Z,1478847138.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:18.573Z,1478847138.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:18.897Z,1478847138.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:18.913Z,1478847138.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:19.297Z,1478847139.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:19.350Z,1478847139.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:19.697Z,1478847139.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:19.712Z,1478847139.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:20.097Z,1478847140.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:20.117Z,1478847140.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:20.509Z,1478847140.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:20.524Z,1478847140.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:20.904Z,1478847140.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:20.919Z,1478847140.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:21.303Z,1478847141.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:21.318Z,1478847141.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:21.707Z,1478847141.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:21.723Z,1478847141.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:21.723Z,1478847141.723 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2016-11-11T06:52:21.723Z,1478847141.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:52:21.729Z,1478847141.729 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:21.729Z,1478847141.730 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2016-11-11T06:52:21.730Z,1478847141.730 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:52:21.787Z,1478847141.787 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:52:21.788Z,1478847141.787 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:52:22.097Z,1478847142.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:22.146Z,1478847142.146 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:52:22.146Z,1478847142.146 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2016-11-11T06:52:22.175Z,1478847142.175 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:52:22.175Z,1478847142.175 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2016-11-11T06:52:22.497Z,1478847142.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:22.521Z,1478847142.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:52:22.521Z,1478847142.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:52:22.522Z,1478847142.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:52:22.526Z,1478847142.526 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:52:22.527Z,1478847142.527 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:52:22.527Z,1478847142.527 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:52:22.897Z,1478847142.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:22.931Z,1478847142.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:23.297Z,1478847143.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:23.330Z,1478847143.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:23.697Z,1478847143.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:23.729Z,1478847143.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:24.101Z,1478847144.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:24.137Z,1478847144.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:24.497Z,1478847144.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:24.530Z,1478847144.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:24.897Z,1478847144.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:24.929Z,1478847144.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:25.297Z,1478847145.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:25.329Z,1478847145.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:25.697Z,1478847145.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:25.740Z,1478847145.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:26.097Z,1478847146.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:26.137Z,1478847146.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:26.501Z,1478847146.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:26.537Z,1478847146.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:26.553Z,1478847146.553 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:26.553Z,1478847146.553 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 22
2016-11-11T06:52:26.553Z,1478847146.553 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:52:26.612Z,1478847146.612 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:52:26.905Z,1478847146.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:26.925Z,1478847146.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:26.973Z,1478847146.973 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:52:26.973Z,1478847146.973 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 22
2016-11-11T06:52:27.060Z,1478847147.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:27.305Z,1478847147.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:27.325Z,1478847147.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:27.331Z,1478847147.331 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:52:27.331Z,1478847147.332 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:52:27.332Z,1478847147.332 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:52:27.697Z,1478847147.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:27.729Z,1478847147.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:27.856Z,1478847147.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:28.097Z,1478847148.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:28.129Z,1478847148.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:28.497Z,1478847148.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:28.529Z,1478847148.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:28.905Z,1478847148.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:28.938Z,1478847148.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:29.297Z,1478847149.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:29.329Z,1478847149.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:29.697Z,1478847149.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:29.729Z,1478847149.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:30.105Z,1478847150.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:30.131Z,1478847150.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:30.497Z,1478847150.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:30.532Z,1478847150.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:30.897Z,1478847150.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:30.929Z,1478847150.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:31.301Z,1478847151.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:31.385Z,1478847151.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:31.697Z,1478847151.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:31.724Z,1478847151.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:32.097Z,1478847152.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:32.153Z,1478847152.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:32.509Z,1478847152.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:32.529Z,1478847152.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:32.904Z,1478847152.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:32.942Z,1478847152.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:33.306Z,1478847153.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:33.362Z,1478847153.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:33.713Z,1478847153.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:33.728Z,1478847153.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:34.097Z,1478847154.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:34.131Z,1478847154.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:34.497Z,1478847154.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:34.524Z,1478847154.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:34.897Z,1478847154.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:34.923Z,1478847154.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:35.313Z,1478847155.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:35.327Z,1478847155.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:35.698Z,1478847155.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:35.729Z,1478847155.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:36.098Z,1478847156.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:36.130Z,1478847156.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:36.497Z,1478847156.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:36.533Z,1478847156.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:36.898Z,1478847156.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:36.933Z,1478847156.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:37.297Z,1478847157.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:37.321Z,1478847157.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:37.697Z,1478847157.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:37.740Z,1478847157.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:38.097Z,1478847158.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:38.113Z,1478847158.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:38.497Z,1478847158.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:38.518Z,1478847158.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:38.897Z,1478847158.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:38.918Z,1478847158.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:39.303Z,1478847159.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:39.318Z,1478847159.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:39.704Z,1478847159.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:39.719Z,1478847159.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:40.103Z,1478847160.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:40.125Z,1478847160.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:40.508Z,1478847160.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:40.525Z,1478847160.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:40.897Z,1478847160.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:40.933Z,1478847160.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:41.297Z,1478847161.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:41.329Z,1478847161.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:41.697Z,1478847161.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:41.737Z,1478847161.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:42.097Z,1478847162.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:42.117Z,1478847162.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:42.497Z,1478847162.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:42.512Z,1478847162.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:42.904Z,1478847162.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:42.919Z,1478847162.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:43.304Z,1478847163.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:43.326Z,1478847163.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:43.704Z,1478847163.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:43.725Z,1478847163.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:44.108Z,1478847164.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:44.123Z,1478847164.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:44.508Z,1478847164.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:44.541Z,1478847164.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:44.913Z,1478847164.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:44.937Z,1478847164.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:45.304Z,1478847165.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:45.365Z,1478847165.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:45.700Z,1478847165.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:45.761Z,1478847165.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:46.103Z,1478847166.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:46.118Z,1478847166.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:46.503Z,1478847166.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:46.556Z,1478847166.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:46.905Z,1478847166.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:46.919Z,1478847166.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:47.304Z,1478847167.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:47.354Z,1478847167.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:47.704Z,1478847167.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:47.757Z,1478847167.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:48.104Z,1478847168.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:48.119Z,1478847168.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:48.497Z,1478847168.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:48.517Z,1478847168.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:48.897Z,1478847168.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:48.912Z,1478847168.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:49.297Z,1478847169.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:49.321Z,1478847169.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:49.704Z,1478847169.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:49.725Z,1478847169.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:50.101Z,1478847170.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:50.116Z,1478847170.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:50.505Z,1478847170.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:50.539Z,1478847170.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:50.897Z,1478847170.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:50.933Z,1478847170.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:51.297Z,1478847171.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:51.328Z,1478847171.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:51.697Z,1478847171.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:51.711Z,1478847171.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:52.102Z,1478847172.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:52.135Z,1478847172.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:52.497Z,1478847172.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:52.521Z,1478847172.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:52.904Z,1478847172.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:52.925Z,1478847172.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:53.304Z,1478847173.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:53.325Z,1478847173.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:53.705Z,1478847173.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:53.720Z,1478847173.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:54.105Z,1478847174.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:54.125Z,1478847174.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:54.513Z,1478847174.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:54.533Z,1478847174.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:54.897Z,1478847174.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:54.929Z,1478847174.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:55.297Z,1478847175.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:55.329Z,1478847175.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:55.701Z,1478847175.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:55.733Z,1478847175.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:56.097Z,1478847176.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:56.123Z,1478847176.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:56.497Z,1478847176.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:56.529Z,1478847176.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:56.901Z,1478847176.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:56.933Z,1478847176.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:57.301Z,1478847177.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:57.327Z,1478847177.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:57.697Z,1478847177.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:57.729Z,1478847177.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:58.101Z,1478847178.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:58.133Z,1478847178.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:58.497Z,1478847178.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:58.517Z,1478847178.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:58.908Z,1478847178.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:58.935Z,1478847178.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:59.305Z,1478847179.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:59.320Z,1478847179.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:52:59.704Z,1478847179.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:52:59.777Z,1478847179.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:00.106Z,1478847180.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:00.133Z,1478847180.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:00.499Z,1478847180.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:00.514Z,1478847180.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:00.903Z,1478847180.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:00.953Z,1478847180.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:01.306Z,1478847181.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:01.354Z,1478847181.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:01.706Z,1478847181.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:01.772Z,1478847181.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:02.106Z,1478847182.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:02.186Z,1478847182.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:02.501Z,1478847182.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:02.565Z,1478847182.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:02.907Z,1478847182.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:02.956Z,1478847182.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:03.306Z,1478847183.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:03.338Z,1478847183.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:03.699Z,1478847183.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:03.742Z,1478847183.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:04.125Z,1478847184.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:04.198Z,1478847184.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:04.506Z,1478847184.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:04.526Z,1478847184.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:04.899Z,1478847184.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:04.947Z,1478847184.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:13.326Z,1478847193.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:13.342Z,1478847193.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:13.447Z,1478847193.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:13.481Z,1478847193.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:13.813Z,1478847193.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:13.829Z,1478847193.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:14.272Z,1478847194.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:14.349Z,1478847194.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:14.619Z,1478847194.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:14.635Z,1478847194.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:15.019Z,1478847195.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:15.069Z,1478847195.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:15.435Z,1478847195.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:15.450Z,1478847195.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:15.815Z,1478847195.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:15.892Z,1478847195.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:16.217Z,1478847196.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:16.275Z,1478847196.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:16.615Z,1478847196.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:16.673Z,1478847196.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:17.021Z,1478847197.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:17.075Z,1478847197.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:17.421Z,1478847197.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:17.446Z,1478847197.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:17.814Z,1478847197.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:17.858Z,1478847197.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:18.216Z,1478847198.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:18.277Z,1478847198.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:18.613Z,1478847198.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:18.692Z,1478847198.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:19.022Z,1478847199.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:19.082Z,1478847199.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:19.414Z,1478847199.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:19.438Z,1478847199.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:19.823Z,1478847199.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:19.867Z,1478847199.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:20.231Z,1478847200.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:20.290Z,1478847200.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:20.614Z,1478847200.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:20.650Z,1478847200.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:21.023Z,1478847201.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:21.063Z,1478847201.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:21.422Z,1478847201.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:21.453Z,1478847201.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:21.822Z,1478847201.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:21.858Z,1478847201.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:22.218Z,1478847202.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:22.244Z,1478847202.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:22.613Z,1478847202.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:22.646Z,1478847202.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:23.013Z,1478847203.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:23.045Z,1478847203.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:23.421Z,1478847203.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:23.447Z,1478847203.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:23.813Z,1478847203.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:23.849Z,1478847203.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:24.213Z,1478847204.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:24.253Z,1478847204.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:24.636Z,1478847204.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:24.651Z,1478847204.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:25.017Z,1478847205.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:25.054Z,1478847205.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:25.413Z,1478847205.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:25.449Z,1478847205.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:25.817Z,1478847205.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:25.854Z,1478847205.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:26.220Z,1478847206.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:26.237Z,1478847206.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:26.624Z,1478847206.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:26.653Z,1478847206.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:27.021Z,1478847207.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:27.036Z,1478847207.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:27.416Z,1478847207.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:27.452Z,1478847207.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:27.813Z,1478847207.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:27.848Z,1478847207.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:28.213Z,1478847208.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:28.239Z,1478847208.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:28.624Z,1478847208.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:28.701Z,1478847208.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:29.013Z,1478847209.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:29.051Z,1478847209.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:29.413Z,1478847209.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:29.461Z,1478847209.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:29.817Z,1478847209.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:29.831Z,1478847209.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:30.210Z,1478847210.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:30.258Z,1478847210.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:30.617Z,1478847210.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:30.661Z,1478847210.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:31.017Z,1478847211.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:31.032Z,1478847211.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:31.417Z,1478847211.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:31.433Z,1478847211.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:31.817Z,1478847211.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:31.832Z,1478847211.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:32.213Z,1478847212.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:32.233Z,1478847212.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:32.617Z,1478847212.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:32.632Z,1478847212.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:33.013Z,1478847213.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:33.033Z,1478847213.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:33.417Z,1478847213.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:33.432Z,1478847213.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:33.817Z,1478847213.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:33.841Z,1478847213.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:34.221Z,1478847214.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:34.236Z,1478847214.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:34.617Z,1478847214.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:34.632Z,1478847214.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:35.017Z,1478847215.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:35.032Z,1478847215.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:35.414Z,1478847215.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:35.430Z,1478847215.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:35.813Z,1478847215.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:35.833Z,1478847215.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:36.210Z,1478847216.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:36.225Z,1478847216.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:36.617Z,1478847216.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:36.632Z,1478847216.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:37.017Z,1478847217.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:37.039Z,1478847217.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:37.413Z,1478847217.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:37.428Z,1478847217.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:37.817Z,1478847217.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:37.832Z,1478847217.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:38.213Z,1478847218.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:38.233Z,1478847218.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:38.617Z,1478847218.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:38.641Z,1478847218.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:39.013Z,1478847219.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:39.033Z,1478847219.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:39.417Z,1478847219.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:39.432Z,1478847219.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:39.813Z,1478847219.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:39.828Z,1478847219.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:40.222Z,1478847220.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:40.240Z,1478847220.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:40.617Z,1478847220.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:40.642Z,1478847220.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:41.017Z,1478847221.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:41.037Z,1478847221.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:41.431Z,1478847221.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:41.448Z,1478847221.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:41.817Z,1478847221.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:41.853Z,1478847221.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:42.217Z,1478847222.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:42.287Z,1478847222.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:42.617Z,1478847222.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:42.670Z,1478847222.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:43.017Z,1478847223.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:43.036Z,1478847223.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:43.413Z,1478847223.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:43.433Z,1478847223.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:43.817Z,1478847223.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:43.859Z,1478847223.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:44.213Z,1478847224.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:44.227Z,1478847224.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:44.617Z,1478847224.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:44.661Z,1478847224.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:45.014Z,1478847225.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:45.061Z,1478847225.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:45.417Z,1478847225.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:45.453Z,1478847225.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:45.837Z,1478847225.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:45.870Z,1478847225.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:46.217Z,1478847226.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:46.242Z,1478847226.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:46.619Z,1478847226.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:46.627Z,1478847226.626 [PNI_TCM](ERROR): CRC does not match. Expected:0x47112 got:0x10265
2016-11-11T06:53:46.653Z,1478847226.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:47.017Z,1478847227.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:47.052Z,1478847227.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:47.417Z,1478847227.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:47.434Z,1478847227.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:47.813Z,1478847227.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:47.832Z,1478847227.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:48.219Z,1478847228.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:48.234Z,1478847228.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:48.617Z,1478847228.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:48.646Z,1478847228.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:49.017Z,1478847229.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:49.039Z,1478847229.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:49.410Z,1478847229.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:49.429Z,1478847229.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:49.819Z,1478847229.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:49.834Z,1478847229.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:50.217Z,1478847230.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:50.250Z,1478847230.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:50.617Z,1478847230.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:50.636Z,1478847230.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:51.018Z,1478847231.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:51.035Z,1478847231.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:51.415Z,1478847231.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:51.430Z,1478847231.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:51.817Z,1478847231.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:51.849Z,1478847231.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:52.213Z,1478847232.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:52.232Z,1478847232.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:52.619Z,1478847232.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:52.635Z,1478847232.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:53.020Z,1478847233.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:53.036Z,1478847233.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:53.417Z,1478847233.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:53.449Z,1478847233.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:53.815Z,1478847233.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:53.841Z,1478847233.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:54.216Z,1478847234.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:54.232Z,1478847234.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:54.642Z,1478847234.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:54.681Z,1478847234.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:55.013Z,1478847235.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:55.042Z,1478847235.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:55.413Z,1478847235.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:55.444Z,1478847235.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:55.816Z,1478847235.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:55.845Z,1478847235.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:56.216Z,1478847236.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:56.244Z,1478847236.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:56.614Z,1478847236.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:56.645Z,1478847236.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:57.014Z,1478847237.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:57.086Z,1478847237.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:57.416Z,1478847237.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:57.445Z,1478847237.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:57.826Z,1478847237.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:57.845Z,1478847237.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:58.213Z,1478847238.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:58.265Z,1478847238.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:58.615Z,1478847238.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:58.640Z,1478847238.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:59.016Z,1478847239.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:59.061Z,1478847239.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:59.414Z,1478847239.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:59.457Z,1478847239.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:53:59.814Z,1478847239.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:53:59.845Z,1478847239.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:00.215Z,1478847240.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:00.223Z,1478847240.223 [PNI_TCM](ERROR): CRC does not match. Expected:0x52057 got:0x476
2016-11-11T06:54:00.253Z,1478847240.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:00.615Z,1478847240.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:00.688Z,1478847240.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:01.014Z,1478847241.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:01.045Z,1478847241.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:01.413Z,1478847241.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:01.456Z,1478847241.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:01.815Z,1478847241.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:01.822Z,1478847241.822 [PNI_TCM](ERROR): CRC does not match. Expected:0x62822 got:0x16962
2016-11-11T06:54:01.861Z,1478847241.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:02.222Z,1478847242.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:02.238Z,1478847242.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:02.621Z,1478847242.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:02.637Z,1478847242.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:03.024Z,1478847243.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:03.057Z,1478847243.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:03.420Z,1478847243.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:03.443Z,1478847243.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:03.821Z,1478847243.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:03.837Z,1478847243.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:04.224Z,1478847244.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:04.243Z,1478847244.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:04.621Z,1478847244.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:04.641Z,1478847244.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:05.032Z,1478847245.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:05.047Z,1478847245.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:08.632Z,1478847248.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:08.648Z,1478847248.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:08.758Z,1478847248.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:08.785Z,1478847248.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:09.136Z,1478847249.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:09.157Z,1478847249.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:09.530Z,1478847249.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:09.552Z,1478847249.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:09.947Z,1478847249.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:09.973Z,1478847249.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:10.325Z,1478847250.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:10.357Z,1478847250.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:10.733Z,1478847250.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:10.765Z,1478847250.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:11.129Z,1478847251.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:11.169Z,1478847251.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:11.525Z,1478847251.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:11.604Z,1478847251.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:11.927Z,1478847251.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:11.958Z,1478847251.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:12.333Z,1478847252.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:12.390Z,1478847252.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:12.740Z,1478847252.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:12.761Z,1478847252.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:13.137Z,1478847253.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:13.189Z,1478847253.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:13.529Z,1478847253.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:13.581Z,1478847253.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:13.932Z,1478847253.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:13.947Z,1478847253.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:14.337Z,1478847254.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:14.357Z,1478847254.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:14.737Z,1478847254.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:14.752Z,1478847254.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:15.133Z,1478847255.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:15.148Z,1478847255.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:15.528Z,1478847255.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:15.560Z,1478847255.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:15.933Z,1478847255.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:15.948Z,1478847255.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:16.326Z,1478847256.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:16.352Z,1478847256.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:16.725Z,1478847256.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:16.757Z,1478847256.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:17.126Z,1478847257.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:17.152Z,1478847257.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:17.525Z,1478847257.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:17.561Z,1478847257.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:17.925Z,1478847257.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:17.961Z,1478847257.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:18.325Z,1478847258.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:18.361Z,1478847258.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:18.733Z,1478847258.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:18.770Z,1478847258.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:19.125Z,1478847259.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:19.161Z,1478847259.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:19.526Z,1478847259.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:19.549Z,1478847259.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:19.931Z,1478847259.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:19.953Z,1478847259.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:20.332Z,1478847260.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:20.347Z,1478847260.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:20.737Z,1478847260.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:20.758Z,1478847260.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:21.136Z,1478847261.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:21.151Z,1478847261.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:21.525Z,1478847261.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:21.561Z,1478847261.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:21.925Z,1478847261.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:21.961Z,1478847261.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:22.325Z,1478847262.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:22.361Z,1478847262.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:22.725Z,1478847262.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:22.757Z,1478847262.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:23.129Z,1478847263.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:23.154Z,1478847263.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:23.525Z,1478847263.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:23.560Z,1478847263.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:23.925Z,1478847263.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:23.961Z,1478847263.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:24.330Z,1478847264.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:24.369Z,1478847264.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:24.725Z,1478847264.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:24.753Z,1478847264.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:25.132Z,1478847265.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:25.148Z,1478847265.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:25.532Z,1478847265.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:25.597Z,1478847265.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:25.925Z,1478847265.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:25.958Z,1478847265.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:26.325Z,1478847266.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:26.385Z,1478847266.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:26.733Z,1478847266.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:26.761Z,1478847266.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:27.130Z,1478847267.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:27.178Z,1478847267.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:27.525Z,1478847267.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:27.579Z,1478847267.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:27.932Z,1478847267.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:27.947Z,1478847267.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:28.331Z,1478847268.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:28.353Z,1478847268.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:28.725Z,1478847268.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:28.759Z,1478847268.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:29.125Z,1478847269.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:29.157Z,1478847269.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:29.525Z,1478847269.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:29.545Z,1478847269.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:29.925Z,1478847269.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:29.940Z,1478847269.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:30.325Z,1478847270.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:30.345Z,1478847270.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:30.737Z,1478847270.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:30.765Z,1478847270.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:31.125Z,1478847271.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:31.159Z,1478847271.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:31.525Z,1478847271.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:31.557Z,1478847271.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:31.925Z,1478847271.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:31.958Z,1478847271.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:32.325Z,1478847272.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:32.358Z,1478847272.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:32.733Z,1478847272.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:32.761Z,1478847272.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:33.130Z,1478847273.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:33.145Z,1478847273.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:33.530Z,1478847273.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:33.557Z,1478847273.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:33.932Z,1478847273.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:33.947Z,1478847273.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:34.333Z,1478847274.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:34.353Z,1478847274.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:34.725Z,1478847274.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:34.761Z,1478847274.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:35.125Z,1478847275.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:35.157Z,1478847275.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:35.525Z,1478847275.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:35.561Z,1478847275.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:35.925Z,1478847275.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:35.956Z,1478847275.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:36.336Z,1478847276.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:36.368Z,1478847276.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:36.736Z,1478847276.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:36.777Z,1478847276.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:37.131Z,1478847277.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:37.146Z,1478847277.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:37.528Z,1478847277.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:37.552Z,1478847277.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:37.935Z,1478847277.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:37.950Z,1478847277.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:38.325Z,1478847278.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:38.359Z,1478847278.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:38.733Z,1478847278.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:38.742Z,1478847278.742 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T06:54:38.742Z,1478847278.742 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:54:38.742Z,1478847278.742 [BPC1](ERROR): Data Fault
2016-11-11T06:54:38.777Z,1478847278.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:38.818Z,1478847278.818 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:54:39.128Z,1478847279.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:39.144Z,1478847279.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:39.526Z,1478847279.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:39.562Z,1478847279.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:39.936Z,1478847279.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:39.952Z,1478847279.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:39.992Z,1478847279.991 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:54:39.992Z,1478847279.992 [BPC1] No Fault, FailCount= 1
2016-11-11T06:54:40.325Z,1478847280.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:40.402Z,1478847280.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:40.730Z,1478847280.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:40.777Z,1478847280.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:41.133Z,1478847281.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:41.148Z,1478847281.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:41.532Z,1478847281.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:41.547Z,1478847281.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:41.931Z,1478847281.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:41.953Z,1478847281.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:42.333Z,1478847282.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:42.369Z,1478847282.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:42.725Z,1478847282.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:42.745Z,1478847282.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:43.128Z,1478847283.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:43.143Z,1478847283.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:43.533Z,1478847283.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:43.548Z,1478847283.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:43.931Z,1478847283.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:43.953Z,1478847283.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:44.325Z,1478847284.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:44.358Z,1478847284.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:44.732Z,1478847284.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:44.755Z,1478847284.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:45.125Z,1478847285.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:45.166Z,1478847285.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:45.525Z,1478847285.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:45.560Z,1478847285.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:45.933Z,1478847285.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:45.969Z,1478847285.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:46.325Z,1478847286.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:46.345Z,1478847286.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:46.732Z,1478847286.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:46.746Z,1478847286.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:47.133Z,1478847287.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:47.148Z,1478847287.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:47.532Z,1478847287.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:47.547Z,1478847287.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:47.936Z,1478847287.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:47.951Z,1478847287.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:48.333Z,1478847288.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:48.404Z,1478847288.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:48.725Z,1478847288.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:48.757Z,1478847288.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:49.125Z,1478847289.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:49.159Z,1478847289.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:49.525Z,1478847289.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:49.557Z,1478847289.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:49.925Z,1478847289.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:49.957Z,1478847289.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:50.332Z,1478847290.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:50.353Z,1478847290.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:50.728Z,1478847290.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:50.757Z,1478847290.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:51.132Z,1478847291.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:51.147Z,1478847291.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:51.532Z,1478847291.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:51.553Z,1478847291.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:51.936Z,1478847291.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:51.957Z,1478847291.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:52.333Z,1478847292.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:52.393Z,1478847292.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:52.725Z,1478847292.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:52.740Z,1478847292.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:53.129Z,1478847293.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:53.165Z,1478847293.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:53.531Z,1478847293.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:53.546Z,1478847293.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:53.932Z,1478847293.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:53.947Z,1478847293.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:54.325Z,1478847294.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:54.361Z,1478847294.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:54.725Z,1478847294.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:54.761Z,1478847294.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:55.125Z,1478847295.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:55.153Z,1478847295.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:55.526Z,1478847295.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:55.557Z,1478847295.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:55.926Z,1478847295.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:55.943Z,1478847295.943 [BPC1](ERROR): Failed to receive battery data
2016-11-11T06:54:55.943Z,1478847295.944 [BPC1] Communications Fault, FailCount= 2
2016-11-11T06:54:55.944Z,1478847295.944 [BPC1](ERROR): Communications Fault
2016-11-11T06:54:55.959Z,1478847295.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:56.044Z,1478847296.044 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T06:54:56.325Z,1478847296.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:56.362Z,1478847296.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:56.725Z,1478847296.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:56.758Z,1478847296.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:57.133Z,1478847297.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:57.169Z,1478847297.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:57.188Z,1478847297.188 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:54:57.188Z,1478847297.188 [BPC1] No Fault, FailCount= 2
2016-11-11T06:54:57.525Z,1478847297.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:57.604Z,1478847297.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:57.925Z,1478847297.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:57.940Z,1478847297.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:58.337Z,1478847298.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:58.393Z,1478847298.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:58.728Z,1478847298.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:58.748Z,1478847298.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:59.128Z,1478847299.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:59.144Z,1478847299.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:59.532Z,1478847299.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:59.553Z,1478847299.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:54:59.932Z,1478847299.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:54:59.947Z,1478847299.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:00.325Z,1478847300.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:00.397Z,1478847300.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:00.732Z,1478847300.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:00.746Z,1478847300.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:01.132Z,1478847301.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:01.147Z,1478847301.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:01.528Z,1478847301.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:01.551Z,1478847301.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:01.932Z,1478847301.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:01.965Z,1478847301.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:02.325Z,1478847302.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:02.410Z,1478847302.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:02.725Z,1478847302.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:02.740Z,1478847302.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:03.124Z,1478847303.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:03.145Z,1478847303.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:03.532Z,1478847303.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:03.592Z,1478847303.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:03.928Z,1478847303.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:03.944Z,1478847303.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:04.332Z,1478847304.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:04.387Z,1478847304.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:04.732Z,1478847304.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:04.747Z,1478847304.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:05.132Z,1478847305.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:05.188Z,1478847305.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:08.558Z,1478847308.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:08.598Z,1478847308.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:08.701Z,1478847308.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:08.738Z,1478847308.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:09.076Z,1478847309.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:09.099Z,1478847309.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:09.469Z,1478847309.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:09.501Z,1478847309.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:09.880Z,1478847309.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:09.896Z,1478847309.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:10.269Z,1478847310.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:10.305Z,1478847310.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:10.669Z,1478847310.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:10.701Z,1478847310.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:11.069Z,1478847311.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:11.093Z,1478847311.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:11.473Z,1478847311.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:11.505Z,1478847311.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:11.869Z,1478847311.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:11.892Z,1478847311.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:12.269Z,1478847312.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:12.305Z,1478847312.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:12.673Z,1478847312.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:12.716Z,1478847312.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:13.069Z,1478847313.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:13.084Z,1478847313.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:13.474Z,1478847313.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:13.493Z,1478847313.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:13.877Z,1478847313.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:13.892Z,1478847313.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:14.276Z,1478847314.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:14.290Z,1478847314.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:14.669Z,1478847314.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:14.701Z,1478847314.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:15.076Z,1478847315.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:15.100Z,1478847315.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:15.469Z,1478847315.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:15.503Z,1478847315.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:15.869Z,1478847315.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:15.904Z,1478847315.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:16.276Z,1478847316.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:16.300Z,1478847316.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:16.669Z,1478847316.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:16.712Z,1478847316.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:17.077Z,1478847317.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:17.109Z,1478847317.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:17.469Z,1478847317.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:17.489Z,1478847317.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:17.869Z,1478847317.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:17.889Z,1478847317.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:18.269Z,1478847318.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:18.301Z,1478847318.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:18.677Z,1478847318.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:18.703Z,1478847318.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:19.069Z,1478847319.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:19.127Z,1478847319.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:19.469Z,1478847319.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:19.496Z,1478847319.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:19.869Z,1478847319.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:19.905Z,1478847319.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:20.275Z,1478847320.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:20.337Z,1478847320.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:20.669Z,1478847320.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:20.701Z,1478847320.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:21.084Z,1478847321.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:21.141Z,1478847321.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:21.469Z,1478847321.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:21.501Z,1478847321.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:21.869Z,1478847321.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:21.917Z,1478847321.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:22.277Z,1478847322.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:22.329Z,1478847322.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:22.669Z,1478847322.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:22.689Z,1478847322.689 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:22.689Z,1478847322.689 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2016-11-11T06:55:22.689Z,1478847322.689 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:55:22.739Z,1478847322.740 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:22.740Z,1478847322.740 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2016-11-11T06:55:22.740Z,1478847322.740 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:55:22.766Z,1478847322.766 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:55:22.766Z,1478847322.766 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:55:23.077Z,1478847323.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:23.122Z,1478847323.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:55:23.122Z,1478847323.122 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2016-11-11T06:55:23.127Z,1478847323.127 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:55:23.127Z,1478847323.127 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2016-11-11T06:55:23.477Z,1478847323.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:23.491Z,1478847323.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:55:23.491Z,1478847323.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:55:23.492Z,1478847323.492 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:55:23.496Z,1478847323.496 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:55:23.497Z,1478847323.497 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:55:23.497Z,1478847323.497 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:55:23.871Z,1478847323.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:23.905Z,1478847323.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:24.269Z,1478847324.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:24.309Z,1478847324.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:24.669Z,1478847324.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:24.689Z,1478847324.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:25.073Z,1478847325.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:25.087Z,1478847325.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:25.474Z,1478847325.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:25.489Z,1478847325.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:25.877Z,1478847325.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:25.897Z,1478847325.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:26.276Z,1478847326.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:26.291Z,1478847326.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:26.677Z,1478847326.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:26.693Z,1478847326.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:27.081Z,1478847327.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:27.101Z,1478847327.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:27.477Z,1478847327.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:27.497Z,1478847327.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:27.503Z,1478847327.503 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:27.504Z,1478847327.504 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 23
2016-11-11T06:55:27.504Z,1478847327.504 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:55:27.518Z,1478847327.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:55:27.870Z,1478847327.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:27.908Z,1478847327.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:27.943Z,1478847327.943 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:55:27.947Z,1478847327.947 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 23
2016-11-11T06:55:28.269Z,1478847328.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:28.354Z,1478847328.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:28.376Z,1478847328.376 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:55:28.377Z,1478847328.377 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:55:28.377Z,1478847328.377 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:55:28.669Z,1478847328.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:28.689Z,1478847328.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:29.077Z,1478847329.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:29.093Z,1478847329.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:29.481Z,1478847329.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:29.497Z,1478847329.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:29.881Z,1478847329.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:29.896Z,1478847329.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:30.273Z,1478847330.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:30.349Z,1478847330.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:30.669Z,1478847330.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:30.697Z,1478847330.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:31.069Z,1478847331.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:31.110Z,1478847331.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:31.469Z,1478847331.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:31.505Z,1478847331.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:31.869Z,1478847331.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:31.889Z,1478847331.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:32.269Z,1478847332.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:32.309Z,1478847332.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:32.669Z,1478847332.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:32.689Z,1478847332.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:33.074Z,1478847333.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:33.125Z,1478847333.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:33.475Z,1478847333.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:33.497Z,1478847333.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:33.872Z,1478847333.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:33.893Z,1478847333.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:34.269Z,1478847334.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:34.330Z,1478847334.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:34.669Z,1478847334.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:34.705Z,1478847334.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:35.069Z,1478847335.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:35.125Z,1478847335.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:35.469Z,1478847335.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:35.489Z,1478847335.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:35.874Z,1478847335.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:35.962Z,1478847335.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:36.269Z,1478847336.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:36.321Z,1478847336.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:36.669Z,1478847336.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:36.689Z,1478847336.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:37.069Z,1478847337.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:37.084Z,1478847337.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:37.475Z,1478847337.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:37.497Z,1478847337.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:37.872Z,1478847337.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:37.887Z,1478847337.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:38.281Z,1478847338.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:38.296Z,1478847338.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:38.676Z,1478847338.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:38.691Z,1478847338.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:39.075Z,1478847339.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:39.102Z,1478847339.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:39.476Z,1478847339.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:39.490Z,1478847339.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:39.876Z,1478847339.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:39.891Z,1478847339.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:40.284Z,1478847340.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:40.313Z,1478847340.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:40.669Z,1478847340.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:40.706Z,1478847340.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:41.076Z,1478847341.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:41.091Z,1478847341.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:41.477Z,1478847341.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:41.497Z,1478847341.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:41.877Z,1478847341.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:41.897Z,1478847341.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:42.282Z,1478847342.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:42.342Z,1478847342.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:42.669Z,1478847342.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:42.702Z,1478847342.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:43.069Z,1478847343.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:43.094Z,1478847343.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:43.469Z,1478847343.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:43.501Z,1478847343.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:43.869Z,1478847343.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:43.902Z,1478847343.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:44.330Z,1478847344.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:44.387Z,1478847344.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:44.676Z,1478847344.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:44.692Z,1478847344.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:45.079Z,1478847345.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:45.094Z,1478847345.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:45.476Z,1478847345.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:45.497Z,1478847345.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:45.876Z,1478847345.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:45.928Z,1478847345.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:46.273Z,1478847346.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:46.305Z,1478847346.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:46.683Z,1478847346.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:46.699Z,1478847346.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:47.069Z,1478847347.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:47.101Z,1478847347.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:47.469Z,1478847347.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:47.526Z,1478847347.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:47.873Z,1478847347.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:47.928Z,1478847347.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:48.272Z,1478847348.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:48.325Z,1478847348.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:48.676Z,1478847348.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:48.697Z,1478847348.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:49.081Z,1478847349.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:49.133Z,1478847349.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:49.476Z,1478847349.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:49.491Z,1478847349.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:49.876Z,1478847349.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:49.957Z,1478847349.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:50.024Z,1478847350.024 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T06:55:50.272Z,1478847350.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:50.314Z,1478847350.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:50.676Z,1478847350.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:50.691Z,1478847350.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:51.075Z,1478847351.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:51.097Z,1478847351.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:51.475Z,1478847351.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:51.491Z,1478847351.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:51.876Z,1478847351.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:51.921Z,1478847351.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:52.269Z,1478847352.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:52.302Z,1478847352.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:52.680Z,1478847352.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:52.708Z,1478847352.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:53.069Z,1478847353.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:53.101Z,1478847353.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:53.469Z,1478847353.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:53.502Z,1478847353.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:53.873Z,1478847353.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:53.905Z,1478847353.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:54.269Z,1478847354.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:54.284Z,1478847354.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:54.669Z,1478847354.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:54.689Z,1478847354.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:55.073Z,1478847355.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:55.093Z,1478847355.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:55.470Z,1478847355.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:55.527Z,1478847355.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:55.874Z,1478847355.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:55.893Z,1478847355.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:56.295Z,1478847356.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:56.340Z,1478847356.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:56.669Z,1478847356.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:56.701Z,1478847356.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:57.080Z,1478847357.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:57.095Z,1478847357.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:57.469Z,1478847357.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:57.501Z,1478847357.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:57.869Z,1478847357.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:57.901Z,1478847357.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:58.303Z,1478847358.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:58.342Z,1478847358.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:58.669Z,1478847358.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:58.694Z,1478847358.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:59.069Z,1478847359.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:59.101Z,1478847359.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:59.469Z,1478847359.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:59.501Z,1478847359.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:55:59.873Z,1478847359.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:55:59.956Z,1478847359.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:00.275Z,1478847360.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:00.290Z,1478847360.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:00.676Z,1478847360.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:00.691Z,1478847360.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:01.077Z,1478847361.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:01.129Z,1478847361.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:01.472Z,1478847361.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:01.494Z,1478847361.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:01.895Z,1478847361.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:01.951Z,1478847361.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:02.273Z,1478847362.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:02.329Z,1478847362.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:02.669Z,1478847362.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:02.709Z,1478847362.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:03.074Z,1478847363.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:03.113Z,1478847363.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:03.474Z,1478847363.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:03.505Z,1478847363.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:03.890Z,1478847363.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:03.949Z,1478847363.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:04.282Z,1478847364.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:04.334Z,1478847364.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:04.677Z,1478847364.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:04.692Z,1478847364.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:04.701Z,1478847364.701 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T06:56:04.701Z,1478847364.701 [Default:CheckIn:C.Wait] Stopped
2016-11-11T06:56:04.701Z,1478847364.701 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T06:56:04.701Z,1478847364.701 [Default:CheckIn:D] Running Loop=1
2016-11-11T06:56:05.076Z,1478847365.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:05.092Z,1478847365.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:05.101Z,1478847365.101 [Default:CheckIn:D] Stopped
2016-11-11T06:56:05.101Z,1478847365.101 [Default:CheckIn:E] Running Loop=1
2016-11-11T06:56:05.479Z,1478847365.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:05.494Z,1478847365.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:05.503Z,1478847365.503 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 126.063175 min 
2016-11-11T06:56:05.503Z,1478847365.503 [Default:CheckIn:E] Stopped
2016-11-11T06:56:05.503Z,1478847365.503 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T06:56:05.503Z,1478847365.503 [Default:CheckIn] Stopped
2016-11-11T06:56:05.503Z,1478847365.503 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T06:56:05.504Z,1478847365.504 [Default:CheckIn](INFO): Running loop #13
2016-11-11T06:56:05.504Z,1478847365.504 [Default:CheckIn] Running Loop=13
2016-11-11T06:56:05.504Z,1478847365.504 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T06:56:05.504Z,1478847365.504 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T06:56:09.012Z,1478847369.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:09.045Z,1478847369.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:09.116Z,1478847369.116 [NAL9602](INFO): Powering up
2016-11-11T06:56:09.134Z,1478847369.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:09.169Z,1478847369.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:09.200Z,1478847369.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:09.501Z,1478847369.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:09.517Z,1478847369.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:09.900Z,1478847369.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:09.921Z,1478847369.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:09.996Z,1478847369.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:10.305Z,1478847370.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:10.354Z,1478847370.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:10.701Z,1478847370.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:10.721Z,1478847370.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:11.093Z,1478847371.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:11.121Z,1478847371.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:11.497Z,1478847371.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:11.530Z,1478847371.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:11.893Z,1478847371.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:11.933Z,1478847371.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:12.303Z,1478847372.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:12.355Z,1478847372.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:12.693Z,1478847372.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:12.716Z,1478847372.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:13.098Z,1478847373.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:13.121Z,1478847373.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:13.496Z,1478847373.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:13.511Z,1478847373.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:13.927Z,1478847373.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:13.966Z,1478847373.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:14.300Z,1478847374.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:14.315Z,1478847374.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:14.703Z,1478847374.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:14.719Z,1478847374.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:15.093Z,1478847375.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:15.153Z,1478847375.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:15.493Z,1478847375.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:15.528Z,1478847375.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:15.928Z,1478847375.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:15.969Z,1478847375.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:16.293Z,1478847376.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:16.316Z,1478847376.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:16.693Z,1478847376.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:16.737Z,1478847376.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:17.093Z,1478847377.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:17.136Z,1478847377.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:17.493Z,1478847377.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:17.508Z,1478847377.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:17.908Z,1478847377.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:17.958Z,1478847377.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:18.293Z,1478847378.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:18.326Z,1478847378.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:18.693Z,1478847378.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:18.725Z,1478847378.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:19.093Z,1478847379.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:19.128Z,1478847379.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:19.493Z,1478847379.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:19.501Z,1478847379.501 [BPC1](ERROR): Failed to receive battery data
2016-11-11T06:56:19.501Z,1478847379.501 [BPC1] Communications Fault, FailCount= 1
2016-11-11T06:56:19.502Z,1478847379.501 [BPC1](ERROR): Communications Fault
2016-11-11T06:56:19.544Z,1478847379.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:19.579Z,1478847379.579 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T06:56:19.920Z,1478847379.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:19.961Z,1478847379.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:20.277Z,1478847380.277 [NAL9602](INFO): NAL9602 initialized
2016-11-11T06:56:20.302Z,1478847380.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:20.340Z,1478847380.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:20.701Z,1478847380.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:20.721Z,1478847380.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:20.772Z,1478847380.773 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:56:20.773Z,1478847380.773 [BPC1] No Fault, FailCount= 1
2016-11-11T06:56:21.077Z,1478847381.077 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T06:56:21.077Z,1478847381.077 [NAL9602] Data Fault, FailCount= 2
2016-11-11T06:56:21.077Z,1478847381.077 [NAL9602](ERROR): Data Fault
2016-11-11T06:56:21.097Z,1478847381.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:21.198Z,1478847381.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:21.229Z,1478847381.229 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T06:56:21.477Z,1478847381.477 [NAL9602](INFO): Powering down
2016-11-11T06:56:21.501Z,1478847381.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:21.550Z,1478847381.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:21.932Z,1478847381.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:21.983Z,1478847381.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:22.293Z,1478847382.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:22.324Z,1478847382.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:22.360Z,1478847382.360 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T06:56:22.360Z,1478847382.360 [NAL9602] No Fault, FailCount= 2
2016-11-11T06:56:22.693Z,1478847382.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:22.729Z,1478847382.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:23.093Z,1478847383.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:23.128Z,1478847383.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:23.493Z,1478847383.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:23.529Z,1478847383.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:23.893Z,1478847383.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:23.928Z,1478847383.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:24.295Z,1478847384.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:24.333Z,1478847384.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:24.693Z,1478847384.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:24.733Z,1478847384.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:25.093Z,1478847385.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:25.113Z,1478847385.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:25.493Z,1478847385.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:25.508Z,1478847385.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:25.899Z,1478847385.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:25.914Z,1478847385.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:26.294Z,1478847386.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:26.355Z,1478847386.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:26.677Z,1478847386.677 [NAL9602](INFO): Powering up NAL9602
2016-11-11T06:56:26.697Z,1478847386.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:26.731Z,1478847386.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:27.100Z,1478847387.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:27.116Z,1478847387.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:27.501Z,1478847387.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:27.521Z,1478847387.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:27.910Z,1478847387.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:27.938Z,1478847387.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:28.293Z,1478847388.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:28.329Z,1478847388.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:28.693Z,1478847388.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:28.729Z,1478847388.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:29.093Z,1478847389.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:29.129Z,1478847389.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:29.497Z,1478847389.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:29.529Z,1478847389.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:29.899Z,1478847389.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:29.939Z,1478847389.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:30.297Z,1478847390.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:30.317Z,1478847390.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:30.700Z,1478847390.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:30.716Z,1478847390.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:31.101Z,1478847391.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:31.121Z,1478847391.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:31.500Z,1478847391.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:31.516Z,1478847391.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:31.903Z,1478847391.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:31.950Z,1478847391.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:32.293Z,1478847392.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:32.376Z,1478847392.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:32.701Z,1478847392.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:32.726Z,1478847392.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:33.093Z,1478847393.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:33.141Z,1478847393.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:33.493Z,1478847393.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:33.529Z,1478847393.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:33.899Z,1478847393.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:33.967Z,1478847393.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:34.296Z,1478847394.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:34.345Z,1478847394.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:34.704Z,1478847394.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:34.742Z,1478847394.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:35.097Z,1478847395.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:35.112Z,1478847395.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:35.496Z,1478847395.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:35.512Z,1478847395.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:35.951Z,1478847395.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:36.000Z,1478847396.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:36.299Z,1478847396.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:36.347Z,1478847396.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:36.699Z,1478847396.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:36.714Z,1478847396.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:37.100Z,1478847397.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:37.115Z,1478847397.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:37.509Z,1478847397.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:37.529Z,1478847397.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:37.877Z,1478847397.877 [NAL9602](INFO): NAL9602 initialized
2016-11-11T06:56:37.897Z,1478847397.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:37.924Z,1478847397.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:38.293Z,1478847398.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:38.320Z,1478847398.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:38.724Z,1478847398.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:38.740Z,1478847398.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:39.112Z,1478847399.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:39.140Z,1478847399.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:39.520Z,1478847399.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:39.535Z,1478847399.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:39.902Z,1478847399.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:39.933Z,1478847399.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:40.302Z,1478847400.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:40.331Z,1478847400.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:40.704Z,1478847400.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:40.739Z,1478847400.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:41.108Z,1478847401.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:41.145Z,1478847401.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:41.504Z,1478847401.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:41.536Z,1478847401.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:41.900Z,1478847401.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:41.915Z,1478847401.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:42.296Z,1478847402.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:42.321Z,1478847402.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:42.693Z,1478847402.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:42.729Z,1478847402.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:43.093Z,1478847403.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:43.139Z,1478847403.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:43.499Z,1478847403.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:43.530Z,1478847403.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:43.897Z,1478847403.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:43.949Z,1478847403.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:44.301Z,1478847404.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:44.329Z,1478847404.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:44.702Z,1478847404.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:44.764Z,1478847404.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:45.096Z,1478847405.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:45.152Z,1478847405.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:45.517Z,1478847405.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:45.532Z,1478847405.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:45.916Z,1478847405.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:45.972Z,1478847405.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:46.316Z,1478847406.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:46.355Z,1478847406.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:46.717Z,1478847406.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:46.772Z,1478847406.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:47.093Z,1478847407.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:47.126Z,1478847407.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:47.493Z,1478847407.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:47.545Z,1478847407.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:47.895Z,1478847407.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:47.930Z,1478847407.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:48.294Z,1478847408.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:48.321Z,1478847408.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:48.693Z,1478847408.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:48.731Z,1478847408.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:49.093Z,1478847409.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:49.131Z,1478847409.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:49.501Z,1478847409.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:49.529Z,1478847409.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:49.917Z,1478847409.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:49.959Z,1478847409.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:50.306Z,1478847410.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:50.335Z,1478847410.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:50.711Z,1478847410.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:50.726Z,1478847410.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:51.109Z,1478847411.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:51.125Z,1478847411.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:51.516Z,1478847411.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:51.530Z,1478847411.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:51.915Z,1478847411.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:51.934Z,1478847411.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:52.313Z,1478847412.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:52.334Z,1478847412.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:52.697Z,1478847412.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:52.729Z,1478847412.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:53.094Z,1478847413.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:53.126Z,1478847413.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:53.493Z,1478847413.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:53.523Z,1478847413.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:53.893Z,1478847413.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:53.929Z,1478847413.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:54.320Z,1478847414.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:54.336Z,1478847414.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:54.693Z,1478847414.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:54.730Z,1478847414.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:55.097Z,1478847415.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:55.111Z,1478847415.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:55.498Z,1478847415.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:55.525Z,1478847415.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:55.908Z,1478847415.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:55.923Z,1478847415.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:56.304Z,1478847416.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:56.340Z,1478847416.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:56.712Z,1478847416.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:56.730Z,1478847416.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:57.111Z,1478847417.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:57.126Z,1478847417.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:57.493Z,1478847417.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:57.528Z,1478847417.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:57.893Z,1478847417.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:57.920Z,1478847417.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:58.293Z,1478847418.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:58.373Z,1478847418.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:58.701Z,1478847418.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:58.727Z,1478847418.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:59.093Z,1478847419.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:59.136Z,1478847419.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:59.493Z,1478847419.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:59.536Z,1478847419.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:56:59.897Z,1478847419.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:56:59.945Z,1478847419.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:00.294Z,1478847420.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:00.321Z,1478847420.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:00.693Z,1478847420.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:00.745Z,1478847420.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:01.107Z,1478847421.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:01.158Z,1478847421.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:01.508Z,1478847421.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:01.545Z,1478847421.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:01.908Z,1478847421.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:01.945Z,1478847421.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:02.304Z,1478847422.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:02.341Z,1478847422.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:02.701Z,1478847422.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:02.737Z,1478847422.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:03.093Z,1478847423.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:03.135Z,1478847423.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:03.493Z,1478847423.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:03.513Z,1478847423.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:03.902Z,1478847423.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:03.942Z,1478847423.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:04.301Z,1478847424.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:04.347Z,1478847424.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:04.701Z,1478847424.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:04.747Z,1478847424.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:05.097Z,1478847425.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:05.112Z,1478847425.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:05.502Z,1478847425.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:05.522Z,1478847425.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:09.144Z,1478847429.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:09.159Z,1478847429.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:09.277Z,1478847429.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:09.313Z,1478847429.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:09.656Z,1478847429.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:09.671Z,1478847429.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:10.076Z,1478847430.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:10.110Z,1478847430.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:10.441Z,1478847430.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:10.464Z,1478847430.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:10.845Z,1478847430.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:10.874Z,1478847430.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:11.252Z,1478847431.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:11.281Z,1478847431.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:11.664Z,1478847431.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:11.733Z,1478847431.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:12.045Z,1478847432.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:12.105Z,1478847432.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:12.438Z,1478847432.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:12.453Z,1478847432.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:12.841Z,1478847432.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:12.861Z,1478847432.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:13.241Z,1478847433.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:13.295Z,1478847433.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:13.642Z,1478847433.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:13.657Z,1478847433.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:14.052Z,1478847434.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:14.101Z,1478847434.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:14.450Z,1478847434.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:14.501Z,1478847434.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:14.850Z,1478847434.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:14.886Z,1478847434.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:15.252Z,1478847435.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:15.267Z,1478847435.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:15.633Z,1478847435.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:15.660Z,1478847435.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:16.038Z,1478847436.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:16.077Z,1478847436.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:16.437Z,1478847436.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:16.473Z,1478847436.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:16.832Z,1478847436.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:16.847Z,1478847436.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:17.237Z,1478847437.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:17.252Z,1478847437.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:17.639Z,1478847437.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:17.654Z,1478847437.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:18.041Z,1478847438.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:18.056Z,1478847438.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:18.441Z,1478847438.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:18.461Z,1478847438.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:18.835Z,1478847438.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:18.858Z,1478847438.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:19.250Z,1478847439.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:19.273Z,1478847439.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:19.655Z,1478847439.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:19.729Z,1478847439.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:20.054Z,1478847440.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:20.081Z,1478847440.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:20.460Z,1478847440.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:20.479Z,1478847440.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:20.837Z,1478847440.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:20.872Z,1478847440.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:21.237Z,1478847441.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:21.271Z,1478847441.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:21.637Z,1478847441.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:21.671Z,1478847441.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:22.037Z,1478847442.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:22.075Z,1478847442.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:22.446Z,1478847442.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:22.474Z,1478847442.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:22.858Z,1478847442.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:22.897Z,1478847442.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:23.244Z,1478847443.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:23.291Z,1478847443.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:23.641Z,1478847443.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:23.657Z,1478847443.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:24.048Z,1478847444.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:24.064Z,1478847444.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:24.456Z,1478847444.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:24.464Z,1478847444.464 [BPC1](ERROR): Failed to parse message.
2016-11-11T06:57:24.464Z,1478847444.464 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T06:57:24.464Z,1478847444.464 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:57:24.464Z,1478847444.464 [BPC1](ERROR): Data Fault
2016-11-11T06:57:24.477Z,1478847444.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:24.534Z,1478847444.534 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:57:24.859Z,1478847444.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:24.875Z,1478847444.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:25.254Z,1478847445.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:25.274Z,1478847445.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:25.656Z,1478847445.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:25.671Z,1478847445.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:25.691Z,1478847445.691 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:57:25.691Z,1478847445.691 [BPC1] No Fault, FailCount= 1
2016-11-11T06:57:26.053Z,1478847446.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:26.133Z,1478847446.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:26.445Z,1478847446.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:26.495Z,1478847446.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:26.870Z,1478847446.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:26.909Z,1478847446.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:27.237Z,1478847447.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:27.257Z,1478847447.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:27.645Z,1478847447.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:27.665Z,1478847447.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:28.050Z,1478847448.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:28.065Z,1478847448.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:28.466Z,1478847448.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:28.502Z,1478847448.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:28.848Z,1478847448.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:28.865Z,1478847448.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:29.233Z,1478847449.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:29.260Z,1478847449.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:29.660Z,1478847449.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:29.681Z,1478847449.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:30.048Z,1478847450.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:30.085Z,1478847450.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:30.447Z,1478847450.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:30.468Z,1478847450.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:30.844Z,1478847450.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:30.860Z,1478847450.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:31.241Z,1478847451.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:31.257Z,1478847451.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:31.642Z,1478847451.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:31.657Z,1478847451.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:32.045Z,1478847452.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:32.065Z,1478847452.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:32.441Z,1478847452.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:32.457Z,1478847452.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:32.848Z,1478847452.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:32.863Z,1478847452.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:33.234Z,1478847453.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:33.260Z,1478847453.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:33.633Z,1478847453.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:33.660Z,1478847453.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:34.034Z,1478847454.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:34.074Z,1478847454.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:34.445Z,1478847454.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:34.472Z,1478847454.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:34.852Z,1478847454.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:34.877Z,1478847454.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:35.254Z,1478847455.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:35.269Z,1478847455.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:35.651Z,1478847455.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:35.667Z,1478847455.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:36.052Z,1478847456.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:36.069Z,1478847456.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:36.441Z,1478847456.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:36.477Z,1478847456.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:36.837Z,1478847456.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:36.854Z,1478847456.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:37.237Z,1478847457.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:37.289Z,1478847457.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:37.637Z,1478847457.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:37.658Z,1478847457.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:38.041Z,1478847458.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:38.091Z,1478847458.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:38.441Z,1478847458.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:38.461Z,1478847458.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:38.840Z,1478847458.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:38.889Z,1478847458.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:39.241Z,1478847459.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:39.296Z,1478847459.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:39.666Z,1478847459.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:39.690Z,1478847459.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:40.065Z,1478847460.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:40.080Z,1478847460.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:40.459Z,1478847460.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:40.478Z,1478847460.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:40.848Z,1478847460.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:40.885Z,1478847460.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:41.256Z,1478847461.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:41.300Z,1478847461.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:41.639Z,1478847461.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:41.654Z,1478847461.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:42.037Z,1478847462.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:42.077Z,1478847462.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:42.445Z,1478847462.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:42.480Z,1478847462.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:42.844Z,1478847462.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:42.879Z,1478847462.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:43.274Z,1478847463.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:43.297Z,1478847463.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:43.634Z,1478847463.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:43.653Z,1478847463.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:44.045Z,1478847464.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:44.064Z,1478847464.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:44.449Z,1478847464.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:44.465Z,1478847464.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:44.891Z,1478847464.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:44.928Z,1478847464.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:45.244Z,1478847465.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:45.272Z,1478847465.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:45.633Z,1478847465.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:45.669Z,1478847465.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:46.050Z,1478847466.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:46.065Z,1478847466.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:46.433Z,1478847466.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:46.460Z,1478847466.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:46.849Z,1478847466.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:46.865Z,1478847466.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:47.234Z,1478847467.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:47.265Z,1478847467.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:47.632Z,1478847467.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:47.669Z,1478847467.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:48.031Z,1478847468.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:48.060Z,1478847468.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:48.437Z,1478847468.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:48.457Z,1478847468.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:48.840Z,1478847468.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:48.855Z,1478847468.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:49.248Z,1478847469.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:49.263Z,1478847469.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:49.648Z,1478847469.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:49.663Z,1478847469.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:50.041Z,1478847470.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:50.134Z,1478847470.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:50.441Z,1478847470.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:50.464Z,1478847470.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:50.834Z,1478847470.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:50.866Z,1478847470.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:51.234Z,1478847471.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:51.269Z,1478847471.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:51.631Z,1478847471.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:51.703Z,1478847471.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:52.031Z,1478847472.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:52.046Z,1478847472.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:52.438Z,1478847472.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:52.477Z,1478847472.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:52.837Z,1478847472.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:52.897Z,1478847472.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:53.235Z,1478847473.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:53.250Z,1478847473.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:53.637Z,1478847473.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:53.687Z,1478847473.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:54.041Z,1478847474.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:54.093Z,1478847474.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:54.445Z,1478847474.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:54.460Z,1478847474.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:54.841Z,1478847474.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:54.861Z,1478847474.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:55.239Z,1478847475.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:55.255Z,1478847475.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:55.650Z,1478847475.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:55.665Z,1478847475.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:56.078Z,1478847476.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:56.101Z,1478847476.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:56.450Z,1478847476.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:56.474Z,1478847476.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:56.837Z,1478847476.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:56.852Z,1478847476.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:57.238Z,1478847477.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:57.253Z,1478847477.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:57.652Z,1478847477.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:57.683Z,1478847477.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:58.056Z,1478847478.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:58.071Z,1478847478.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:58.433Z,1478847478.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:58.465Z,1478847478.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:58.833Z,1478847478.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:58.870Z,1478847478.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:59.241Z,1478847479.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:59.268Z,1478847479.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:57:59.641Z,1478847479.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:57:59.668Z,1478847479.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:00.078Z,1478847480.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:00.117Z,1478847480.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:00.438Z,1478847480.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:00.469Z,1478847480.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:00.841Z,1478847480.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:00.878Z,1478847480.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:01.245Z,1478847481.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:01.278Z,1478847481.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:01.684Z,1478847481.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:01.743Z,1478847481.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:02.092Z,1478847482.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:02.182Z,1478847482.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:02.444Z,1478847482.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:02.496Z,1478847482.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:02.853Z,1478847482.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:02.882Z,1478847482.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:03.235Z,1478847483.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:03.280Z,1478847483.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:03.644Z,1478847483.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:03.690Z,1478847483.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:04.043Z,1478847484.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:04.125Z,1478847484.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:04.454Z,1478847484.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:04.482Z,1478847484.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:04.840Z,1478847484.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:04.883Z,1478847484.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:05.259Z,1478847485.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:05.363Z,1478847485.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:05.640Z,1478847485.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:05.683Z,1478847485.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:11.806Z,1478847491.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:11.816Z,1478847491.816 [BPC1](ERROR): Failed to receive battery data
2016-11-11T06:58:11.816Z,1478847491.816 [BPC1] Communications Fault, FailCount= 1
2016-11-11T06:58:11.816Z,1478847491.816 [BPC1](ERROR): Communications Fault
2016-11-11T06:58:11.861Z,1478847491.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:11.897Z,1478847491.897 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T06:58:11.945Z,1478847491.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:11.985Z,1478847491.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:12.354Z,1478847492.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:12.405Z,1478847492.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:12.743Z,1478847492.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:12.769Z,1478847492.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:12.789Z,1478847492.789 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:58:12.789Z,1478847492.789 [BPC1] No Fault, FailCount= 1
2016-11-11T06:58:13.156Z,1478847493.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:13.241Z,1478847493.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:13.543Z,1478847493.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:13.559Z,1478847493.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:13.957Z,1478847493.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:14.017Z,1478847494.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:14.333Z,1478847494.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:14.355Z,1478847494.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:14.728Z,1478847494.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:14.753Z,1478847494.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:15.129Z,1478847495.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:15.145Z,1478847495.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:15.531Z,1478847495.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:15.555Z,1478847495.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:15.929Z,1478847495.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:15.949Z,1478847495.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:16.329Z,1478847496.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:16.349Z,1478847496.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:16.744Z,1478847496.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:16.759Z,1478847496.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:17.145Z,1478847497.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:17.177Z,1478847497.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:17.548Z,1478847497.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:17.569Z,1478847497.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:17.940Z,1478847497.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:17.956Z,1478847497.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:18.337Z,1478847498.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:18.357Z,1478847498.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:18.733Z,1478847498.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:18.748Z,1478847498.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:19.126Z,1478847499.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:19.142Z,1478847499.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:19.530Z,1478847499.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:19.545Z,1478847499.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:19.930Z,1478847499.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:19.945Z,1478847499.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:20.333Z,1478847500.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:20.353Z,1478847500.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:20.729Z,1478847500.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:20.745Z,1478847500.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:21.133Z,1478847501.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:21.149Z,1478847501.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:21.552Z,1478847501.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:21.573Z,1478847501.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:21.944Z,1478847501.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:21.960Z,1478847501.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:22.348Z,1478847502.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:22.369Z,1478847502.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:22.744Z,1478847502.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:22.760Z,1478847502.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:23.133Z,1478847503.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:23.149Z,1478847503.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:23.530Z,1478847503.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:23.549Z,1478847503.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:23.549Z,1478847503.549 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2016-11-11T06:58:23.549Z,1478847503.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T06:58:23.556Z,1478847503.556 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:23.556Z,1478847503.556 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24
2016-11-11T06:58:23.556Z,1478847503.556 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T06:58:23.571Z,1478847503.571 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T06:58:23.571Z,1478847503.571 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T06:58:23.933Z,1478847503.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:23.970Z,1478847503.970 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T06:58:23.971Z,1478847503.971 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2016-11-11T06:58:23.971Z,1478847503.971 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T06:58:23.972Z,1478847503.972 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24
2016-11-11T06:58:24.329Z,1478847504.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:24.348Z,1478847504.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T06:58:24.348Z,1478847504.348 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:58:24.349Z,1478847504.349 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:58:24.354Z,1478847504.353 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T06:58:24.354Z,1478847504.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:58:24.354Z,1478847504.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:58:24.733Z,1478847504.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:24.753Z,1478847504.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:25.129Z,1478847505.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:25.169Z,1478847505.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:25.533Z,1478847505.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:25.553Z,1478847505.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:25.929Z,1478847505.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:25.962Z,1478847505.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:26.326Z,1478847506.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:26.342Z,1478847506.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:26.748Z,1478847506.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:26.793Z,1478847506.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:27.147Z,1478847507.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:27.162Z,1478847507.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:27.539Z,1478847507.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:27.585Z,1478847507.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:27.944Z,1478847507.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:27.985Z,1478847507.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:28.334Z,1478847508.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:28.389Z,1478847508.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:28.404Z,1478847508.404 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:28.404Z,1478847508.404 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 24
2016-11-11T06:58:28.404Z,1478847508.404 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T06:58:28.445Z,1478847508.445 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T06:58:28.729Z,1478847508.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:28.749Z,1478847508.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:28.768Z,1478847508.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T06:58:28.768Z,1478847508.769 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 24
2016-11-11T06:58:29.149Z,1478847509.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:29.169Z,1478847509.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:29.175Z,1478847509.175 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T06:58:29.176Z,1478847509.176 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T06:58:29.176Z,1478847509.176 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T06:58:29.534Z,1478847509.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:29.553Z,1478847509.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:29.933Z,1478847509.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:29.953Z,1478847509.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:30.329Z,1478847510.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:30.349Z,1478847510.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:30.733Z,1478847510.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:30.748Z,1478847510.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:31.133Z,1478847511.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:31.153Z,1478847511.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:31.533Z,1478847511.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:31.553Z,1478847511.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:31.956Z,1478847511.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:31.981Z,1478847511.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:32.340Z,1478847512.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:32.355Z,1478847512.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:32.737Z,1478847512.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:32.757Z,1478847512.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:33.133Z,1478847513.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:33.148Z,1478847513.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:33.526Z,1478847513.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:33.542Z,1478847513.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:33.937Z,1478847513.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:33.957Z,1478847513.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:34.333Z,1478847514.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:34.348Z,1478847514.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:34.729Z,1478847514.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:34.749Z,1478847514.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:35.133Z,1478847515.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:35.153Z,1478847515.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:35.533Z,1478847515.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:35.553Z,1478847515.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:35.933Z,1478847515.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:35.953Z,1478847515.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:36.333Z,1478847516.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:36.353Z,1478847516.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:36.733Z,1478847516.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:36.753Z,1478847516.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:37.133Z,1478847517.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:37.153Z,1478847517.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:37.533Z,1478847517.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:37.553Z,1478847517.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:37.934Z,1478847517.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:37.949Z,1478847517.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:38.331Z,1478847518.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:38.347Z,1478847518.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:38.734Z,1478847518.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:38.750Z,1478847518.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:39.130Z,1478847519.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:39.169Z,1478847519.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:39.531Z,1478847519.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:39.547Z,1478847519.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:39.931Z,1478847519.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:39.970Z,1478847519.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:40.331Z,1478847520.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:40.373Z,1478847520.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:40.747Z,1478847520.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:40.802Z,1478847520.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:41.142Z,1478847521.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:41.186Z,1478847521.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:41.531Z,1478847521.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:41.581Z,1478847521.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:41.930Z,1478847521.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:41.982Z,1478847521.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:42.330Z,1478847522.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:42.366Z,1478847522.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:42.730Z,1478847522.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:42.778Z,1478847522.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:43.131Z,1478847523.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:43.178Z,1478847523.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:43.531Z,1478847523.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:43.557Z,1478847523.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:43.931Z,1478847523.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:43.947Z,1478847523.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:44.331Z,1478847524.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:44.346Z,1478847524.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:44.730Z,1478847524.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:44.768Z,1478847524.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:45.145Z,1478847525.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:45.182Z,1478847525.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:45.542Z,1478847525.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:45.587Z,1478847525.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:45.930Z,1478847525.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:45.965Z,1478847525.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:46.330Z,1478847526.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:46.369Z,1478847526.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:46.731Z,1478847526.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:46.770Z,1478847526.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:47.131Z,1478847527.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:47.165Z,1478847527.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:47.530Z,1478847527.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:47.565Z,1478847527.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:47.931Z,1478847527.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:47.973Z,1478847527.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:48.331Z,1478847528.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:48.382Z,1478847528.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:48.730Z,1478847528.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:48.765Z,1478847528.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:49.130Z,1478847529.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:49.166Z,1478847529.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:49.554Z,1478847529.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:49.597Z,1478847529.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:49.941Z,1478847529.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:49.961Z,1478847529.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:50.331Z,1478847530.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:50.374Z,1478847530.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:50.734Z,1478847530.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:50.769Z,1478847530.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:51.131Z,1478847531.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:51.162Z,1478847531.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:51.531Z,1478847531.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:51.571Z,1478847531.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:51.930Z,1478847531.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:51.961Z,1478847531.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:52.330Z,1478847532.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:52.350Z,1478847532.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:52.730Z,1478847532.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:52.750Z,1478847532.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:53.130Z,1478847533.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:53.145Z,1478847533.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:53.530Z,1478847533.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:53.553Z,1478847533.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:53.945Z,1478847533.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:53.993Z,1478847533.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:54.352Z,1478847534.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:54.405Z,1478847534.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:54.744Z,1478847534.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:54.773Z,1478847534.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:55.140Z,1478847535.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:55.165Z,1478847535.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:55.536Z,1478847535.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:55.587Z,1478847535.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:55.938Z,1478847535.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:55.969Z,1478847535.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:56.329Z,1478847536.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:56.385Z,1478847536.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:56.729Z,1478847536.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:56.783Z,1478847536.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:57.129Z,1478847537.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:57.144Z,1478847537.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:57.529Z,1478847537.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:57.549Z,1478847537.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:57.937Z,1478847537.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:58.006Z,1478847538.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:58.336Z,1478847538.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:58.362Z,1478847538.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:58.742Z,1478847538.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:58.757Z,1478847538.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:59.149Z,1478847539.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:59.164Z,1478847539.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:59.553Z,1478847539.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:58:59.576Z,1478847539.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:58:59.929Z,1478847539.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:00.006Z,1478847540.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:00.335Z,1478847540.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:00.357Z,1478847540.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:00.733Z,1478847540.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:00.757Z,1478847540.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:01.132Z,1478847541.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:01.160Z,1478847541.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:01.536Z,1478847541.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:01.557Z,1478847541.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:01.929Z,1478847541.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:01.961Z,1478847541.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:02.352Z,1478847542.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:02.373Z,1478847542.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:02.729Z,1478847542.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:02.763Z,1478847542.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:03.134Z,1478847543.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:03.173Z,1478847543.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:03.530Z,1478847543.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:03.561Z,1478847543.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:03.941Z,1478847543.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:03.956Z,1478847543.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:04.341Z,1478847544.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:04.361Z,1478847544.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:04.739Z,1478847544.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:04.762Z,1478847544.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:05.133Z,1478847545.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:05.161Z,1478847545.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:05.546Z,1478847545.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:05.562Z,1478847545.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:05.929Z,1478847545.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:05.946Z,1478847545.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:09.425Z,1478847549.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:09.521Z,1478847549.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:09.606Z,1478847549.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:09.690Z,1478847549.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:09.988Z,1478847549.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:10.009Z,1478847550.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:10.389Z,1478847550.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:10.435Z,1478847550.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:10.786Z,1478847550.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:10.807Z,1478847550.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:11.189Z,1478847551.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:11.246Z,1478847551.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:11.584Z,1478847551.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:11.639Z,1478847551.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:11.996Z,1478847551.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:12.025Z,1478847552.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:12.385Z,1478847552.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:12.417Z,1478847552.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:12.786Z,1478847552.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:12.818Z,1478847552.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:13.181Z,1478847553.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:13.213Z,1478847553.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:13.581Z,1478847553.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:13.617Z,1478847553.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:14.005Z,1478847554.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:14.029Z,1478847554.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:14.381Z,1478847554.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:14.418Z,1478847554.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:14.785Z,1478847554.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:14.817Z,1478847554.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:15.186Z,1478847555.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:15.217Z,1478847555.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:15.633Z,1478847555.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:15.672Z,1478847555.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:15.985Z,1478847555.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:16.017Z,1478847556.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:16.386Z,1478847556.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:16.413Z,1478847556.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:16.781Z,1478847556.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:16.821Z,1478847556.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:17.181Z,1478847557.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:17.201Z,1478847557.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:17.634Z,1478847557.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:17.682Z,1478847557.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:17.982Z,1478847557.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:18.002Z,1478847558.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:18.388Z,1478847558.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:18.409Z,1478847558.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:18.792Z,1478847558.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:18.812Z,1478847558.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:19.190Z,1478847559.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:19.211Z,1478847559.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:19.607Z,1478847559.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:19.642Z,1478847559.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:19.990Z,1478847559.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:20.017Z,1478847560.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:20.381Z,1478847560.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:20.414Z,1478847560.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:20.774Z,1478847560.774 [NAL9602](INFO): SBD MO Status=2, MOMSN=340, MT Status=2, MTMSN=0
2016-11-11T06:59:20.774Z,1478847560.774 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T06:59:20.791Z,1478847560.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:20.835Z,1478847560.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:21.200Z,1478847561.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:21.232Z,1478847561.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:21.612Z,1478847561.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:21.689Z,1478847561.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:21.989Z,1478847561.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:22.025Z,1478847562.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:22.385Z,1478847562.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:22.421Z,1478847562.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:22.786Z,1478847562.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:22.802Z,1478847562.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:23.189Z,1478847563.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:23.209Z,1478847563.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:23.591Z,1478847563.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:23.722Z,1478847563.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:23.982Z,1478847563.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:23.998Z,1478847563.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:24.390Z,1478847564.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:24.418Z,1478847564.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:24.788Z,1478847564.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:24.837Z,1478847564.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:25.196Z,1478847565.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:25.228Z,1478847565.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:25.596Z,1478847565.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:25.642Z,1478847565.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:25.990Z,1478847565.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:26.039Z,1478847566.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:26.389Z,1478847566.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:26.410Z,1478847566.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:26.789Z,1478847566.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:26.810Z,1478847566.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:27.189Z,1478847567.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:27.209Z,1478847567.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:27.584Z,1478847567.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:27.618Z,1478847567.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:27.993Z,1478847567.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:28.022Z,1478847568.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:28.403Z,1478847568.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:28.426Z,1478847568.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:28.796Z,1478847568.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:28.824Z,1478847568.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:29.181Z,1478847569.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:29.215Z,1478847569.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:29.619Z,1478847569.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:29.655Z,1478847569.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:29.984Z,1478847569.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:30.017Z,1478847570.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:30.384Z,1478847570.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:30.412Z,1478847570.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:30.789Z,1478847570.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:30.809Z,1478847570.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:31.184Z,1478847571.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:31.216Z,1478847571.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:31.614Z,1478847571.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:31.661Z,1478847571.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:31.981Z,1478847571.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:32.013Z,1478847572.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:32.381Z,1478847572.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:32.418Z,1478847572.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:32.781Z,1478847572.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:32.817Z,1478847572.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:33.181Z,1478847573.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:33.221Z,1478847573.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:33.594Z,1478847573.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:33.634Z,1478847573.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:33.993Z,1478847573.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:34.023Z,1478847574.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:34.389Z,1478847574.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:34.424Z,1478847574.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:34.784Z,1478847574.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:34.809Z,1478847574.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:35.188Z,1478847575.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:35.209Z,1478847575.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:35.603Z,1478847575.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:35.650Z,1478847575.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:35.981Z,1478847575.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:36.005Z,1478847576.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:36.385Z,1478847576.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:36.411Z,1478847576.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:36.808Z,1478847576.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:36.824Z,1478847576.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:37.208Z,1478847577.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:37.223Z,1478847577.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:37.581Z,1478847577.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:37.662Z,1478847577.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:37.982Z,1478847577.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:38.041Z,1478847578.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:38.384Z,1478847578.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:38.437Z,1478847578.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:38.787Z,1478847578.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:38.809Z,1478847578.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:39.190Z,1478847579.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:39.205Z,1478847579.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:39.588Z,1478847579.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:39.649Z,1478847579.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:39.998Z,1478847579.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:40.018Z,1478847580.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:40.369Z,1478847580.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:40.382Z,1478847580.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:40.430Z,1478847580.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:40.781Z,1478847580.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:40.838Z,1478847580.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:41.164Z,1478847581.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:41.185Z,1478847581.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:41.221Z,1478847581.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:41.581Z,1478847581.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:41.625Z,1478847581.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:41.985Z,1478847581.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:42.029Z,1478847582.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:42.382Z,1478847582.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:42.421Z,1478847582.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:42.781Z,1478847582.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:42.801Z,1478847582.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:43.185Z,1478847583.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:43.221Z,1478847583.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:43.597Z,1478847583.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:43.629Z,1478847583.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:43.988Z,1478847583.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:44.025Z,1478847584.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:44.382Z,1478847584.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:44.414Z,1478847584.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:44.781Z,1478847584.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:44.817Z,1478847584.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:45.206Z,1478847585.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:45.222Z,1478847585.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:45.611Z,1478847585.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:45.632Z,1478847585.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:45.985Z,1478847585.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:46.018Z,1478847586.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:46.385Z,1478847586.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:46.405Z,1478847586.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:46.785Z,1478847586.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:46.805Z,1478847586.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:47.186Z,1478847587.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:47.212Z,1478847587.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:47.591Z,1478847587.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:47.642Z,1478847587.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:47.988Z,1478847587.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:48.016Z,1478847588.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:48.389Z,1478847588.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:48.412Z,1478847588.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:48.782Z,1478847588.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:48.808Z,1478847588.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:49.186Z,1478847589.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:49.213Z,1478847589.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:49.600Z,1478847589.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:49.627Z,1478847589.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:49.986Z,1478847589.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:50.021Z,1478847590.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:50.382Z,1478847590.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:50.418Z,1478847590.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:50.759Z,1478847590.759 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T06:59:50.759Z,1478847590.759 [Rowe_600LCM] Communications Fault, FailCount= 1
2016-11-11T06:59:50.759Z,1478847590.759 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T06:59:50.781Z,1478847590.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:50.829Z,1478847590.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T06:59:50.830Z,1478847590.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:50.877Z,1478847590.877 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T06:59:51.163Z,1478847591.163 [Rowe_600LCM](INFO): Powering down
2016-11-11T06:59:51.186Z,1478847591.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:51.200Z,1478847591.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T06:59:51.202Z,1478847591.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:51.590Z,1478847591.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:51.605Z,1478847591.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T06:59:51.606Z,1478847591.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:51.989Z,1478847591.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:51.998Z,1478847591.998 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T06:59:51.998Z,1478847591.998 [BPC1] Data Fault, FailCount= 1
2016-11-11T06:59:51.998Z,1478847591.998 [BPC1](ERROR): Data Fault
2016-11-11T06:59:52.006Z,1478847592.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T06:59:52.007Z,1478847592.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:52.079Z,1478847592.079 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T06:59:52.394Z,1478847592.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:52.409Z,1478847592.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T06:59:52.410Z,1478847592.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:52.456Z,1478847592.457 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T06:59:52.457Z,1478847592.457 [Rowe_600LCM] No Fault, FailCount= 1
2016-11-11T06:59:52.780Z,1478847592.780 [Rowe_600LCM](INFO): Initializing
2016-11-11T06:59:52.781Z,1478847592.781 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T06:59:52.781Z,1478847592.781 [Rowe_600LCM](INFO): LCM OK
2016-11-11T06:59:52.781Z,1478847592.781 [Rowe_600LCM](INFO): Powering up
2016-11-11T06:59:52.793Z,1478847592.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:52.808Z,1478847592.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T06:59:52.809Z,1478847592.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:53.196Z,1478847593.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:53.211Z,1478847593.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T06:59:53.212Z,1478847593.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:53.252Z,1478847593.252 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T06:59:53.252Z,1478847593.252 [BPC1] No Fault, FailCount= 1
2016-11-11T06:59:53.590Z,1478847593.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:53.658Z,1478847593.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T06:59:53.659Z,1478847593.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:54.001Z,1478847594.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:54.052Z,1478847594.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T06:59:54.054Z,1478847594.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:54.400Z,1478847594.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:54.414Z,1478847594.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T06:59:54.416Z,1478847594.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:54.781Z,1478847594.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:54.825Z,1478847594.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T06:59:54.826Z,1478847594.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:55.182Z,1478847595.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:55.217Z,1478847595.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T06:59:55.218Z,1478847595.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:55.597Z,1478847595.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:55.620Z,1478847595.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T06:59:55.622Z,1478847595.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:55.989Z,1478847595.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:56.020Z,1478847596.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T06:59:56.021Z,1478847596.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:56.389Z,1478847596.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:56.423Z,1478847596.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T06:59:56.424Z,1478847596.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:56.793Z,1478847596.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:56.822Z,1478847596.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T06:59:56.842Z,1478847596.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:56.993Z,1478847596.993 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T06:59:57.058Z,1478847597.058 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T06:59:57.060Z,1478847597.060 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T06:59:57.061Z,1478847597.061 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T06:59:57.062Z,1478847597.062 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T06:59:57.192Z,1478847597.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:57.245Z,1478847597.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T06:59:57.246Z,1478847597.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:57.588Z,1478847597.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:57.604Z,1478847597.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:57.992Z,1478847597.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:58.008Z,1478847598.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:58.384Z,1478847598.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:58.412Z,1478847598.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:58.785Z,1478847598.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:58.808Z,1478847598.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:59.189Z,1478847599.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:59.212Z,1478847599.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:59.581Z,1478847599.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T06:59:59.618Z,1478847599.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T06:59:59.985Z,1478847599.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:00.013Z,1478847600.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:00.381Z,1478847600.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:00.414Z,1478847600.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:00.782Z,1478847600.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:00.817Z,1478847600.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:01.182Z,1478847601.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:01.214Z,1478847601.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:01.582Z,1478847601.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:01.618Z,1478847601.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:01.983Z,1478847601.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:02.011Z,1478847602.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:02.397Z,1478847602.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:02.433Z,1478847602.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:02.797Z,1478847602.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:02.828Z,1478847602.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:03.185Z,1478847603.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:03.214Z,1478847603.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:03.586Z,1478847603.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:03.609Z,1478847603.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:04.003Z,1478847604.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:04.076Z,1478847604.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:04.382Z,1478847604.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:04.420Z,1478847604.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:04.786Z,1478847604.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:04.818Z,1478847604.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:05.185Z,1478847605.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:05.227Z,1478847605.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:05.585Z,1478847605.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:05.637Z,1478847605.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:05.985Z,1478847605.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:06.048Z,1478847606.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:09.600Z,1478847609.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:09.616Z,1478847609.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:09.725Z,1478847609.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:09.763Z,1478847609.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:10.117Z,1478847610.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:10.171Z,1478847610.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:10.517Z,1478847610.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:10.538Z,1478847610.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:10.917Z,1478847610.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:10.972Z,1478847610.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:11.326Z,1478847611.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:11.389Z,1478847611.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:11.725Z,1478847611.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:11.797Z,1478847611.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:12.105Z,1478847612.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:12.149Z,1478847612.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:12.506Z,1478847612.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:12.546Z,1478847612.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:12.907Z,1478847612.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:12.949Z,1478847612.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:13.311Z,1478847613.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:13.326Z,1478847613.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:13.716Z,1478847613.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:13.737Z,1478847613.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:14.114Z,1478847614.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:14.131Z,1478847614.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:14.512Z,1478847614.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:14.531Z,1478847614.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:14.916Z,1478847614.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:14.935Z,1478847614.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:15.331Z,1478847615.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:15.346Z,1478847615.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:15.723Z,1478847615.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:15.742Z,1478847615.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:16.109Z,1478847616.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:16.145Z,1478847616.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:16.505Z,1478847616.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:16.520Z,1478847616.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:16.906Z,1478847616.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:16.936Z,1478847616.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:17.308Z,1478847617.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:17.341Z,1478847617.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:17.713Z,1478847617.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:17.730Z,1478847617.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:18.108Z,1478847618.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:18.134Z,1478847618.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:18.513Z,1478847618.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:18.531Z,1478847618.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:18.917Z,1478847618.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:18.935Z,1478847618.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:19.306Z,1478847619.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:19.341Z,1478847619.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:19.727Z,1478847619.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:19.745Z,1478847619.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:20.125Z,1478847620.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:20.142Z,1478847620.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:20.530Z,1478847620.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:20.546Z,1478847620.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:20.934Z,1478847620.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:20.949Z,1478847620.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:21.310Z,1478847621.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:21.348Z,1478847621.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:21.705Z,1478847621.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:21.742Z,1478847621.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:22.117Z,1478847622.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:22.156Z,1478847622.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:22.513Z,1478847622.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:22.558Z,1478847622.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:22.909Z,1478847622.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:22.986Z,1478847622.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:23.322Z,1478847623.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:23.409Z,1478847623.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:23.705Z,1478847623.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:23.736Z,1478847623.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:24.105Z,1478847624.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:24.125Z,1478847624.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:24.524Z,1478847624.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:24.573Z,1478847624.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:24.920Z,1478847624.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:24.957Z,1478847624.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:25.320Z,1478847625.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:25.361Z,1478847625.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:25.728Z,1478847625.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:25.777Z,1478847625.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:26.113Z,1478847626.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:26.128Z,1478847626.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:26.508Z,1478847626.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:26.544Z,1478847626.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:26.916Z,1478847626.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:26.948Z,1478847626.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:27.313Z,1478847627.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:27.334Z,1478847627.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:27.712Z,1478847627.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:27.743Z,1478847627.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:28.120Z,1478847628.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:28.149Z,1478847628.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:28.506Z,1478847628.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:28.571Z,1478847628.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:28.906Z,1478847628.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:28.945Z,1478847628.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:29.320Z,1478847629.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:29.337Z,1478847629.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:29.718Z,1478847629.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:29.743Z,1478847629.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:30.120Z,1478847630.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:30.138Z,1478847630.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:30.520Z,1478847630.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:30.553Z,1478847630.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:30.913Z,1478847630.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:30.935Z,1478847630.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:31.305Z,1478847631.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:31.340Z,1478847631.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:31.720Z,1478847631.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:31.739Z,1478847631.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:32.122Z,1478847632.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:32.139Z,1478847632.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:32.505Z,1478847632.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:32.539Z,1478847632.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:32.909Z,1478847632.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:32.945Z,1478847632.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:33.305Z,1478847633.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:33.333Z,1478847633.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:33.709Z,1478847633.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:33.744Z,1478847633.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:34.139Z,1478847634.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:34.154Z,1478847634.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:34.520Z,1478847634.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:34.550Z,1478847634.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:34.905Z,1478847634.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:34.925Z,1478847634.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:35.310Z,1478847635.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:35.326Z,1478847635.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:35.713Z,1478847635.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:35.728Z,1478847635.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:36.117Z,1478847636.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:36.156Z,1478847636.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:36.508Z,1478847636.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:36.540Z,1478847636.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:36.920Z,1478847636.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:36.937Z,1478847636.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:37.318Z,1478847637.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:37.340Z,1478847637.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:37.720Z,1478847637.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:37.781Z,1478847637.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:38.105Z,1478847638.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:38.157Z,1478847638.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:38.505Z,1478847638.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:38.529Z,1478847638.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:38.909Z,1478847638.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:38.963Z,1478847638.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:39.312Z,1478847639.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:39.347Z,1478847639.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:39.710Z,1478847639.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:39.785Z,1478847639.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:40.105Z,1478847640.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:40.176Z,1478847640.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:40.510Z,1478847640.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:40.540Z,1478847640.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:40.905Z,1478847640.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:40.941Z,1478847640.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:41.305Z,1478847641.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:41.349Z,1478847641.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:41.705Z,1478847641.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:41.752Z,1478847641.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:42.105Z,1478847642.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:42.141Z,1478847642.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:42.510Z,1478847642.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:42.530Z,1478847642.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:42.913Z,1478847642.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:42.928Z,1478847642.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:43.308Z,1478847643.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:43.361Z,1478847643.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:43.717Z,1478847643.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:43.740Z,1478847643.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:44.105Z,1478847644.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:44.147Z,1478847644.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:44.505Z,1478847644.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:44.525Z,1478847644.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:44.909Z,1478847644.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:44.929Z,1478847644.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:45.305Z,1478847645.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:45.345Z,1478847645.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:45.728Z,1478847645.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:45.749Z,1478847645.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:46.120Z,1478847646.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:46.157Z,1478847646.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:46.505Z,1478847646.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:46.545Z,1478847646.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:46.905Z,1478847646.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:46.942Z,1478847646.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:47.309Z,1478847647.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:47.337Z,1478847647.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:47.705Z,1478847647.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:47.745Z,1478847647.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:48.106Z,1478847648.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:48.145Z,1478847648.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:48.506Z,1478847648.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:48.525Z,1478847648.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:48.906Z,1478847648.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:48.925Z,1478847648.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:49.314Z,1478847649.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:49.348Z,1478847649.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:49.713Z,1478847649.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:49.728Z,1478847649.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:50.128Z,1478847650.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:50.149Z,1478847650.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:50.509Z,1478847650.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:50.539Z,1478847650.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:50.909Z,1478847650.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:50.956Z,1478847650.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:51.306Z,1478847651.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:51.338Z,1478847651.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:51.706Z,1478847651.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:51.722Z,1478847651.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:52.110Z,1478847652.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:52.146Z,1478847652.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:52.506Z,1478847652.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:52.549Z,1478847652.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:52.909Z,1478847652.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:52.937Z,1478847652.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:53.313Z,1478847653.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:53.372Z,1478847653.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:53.723Z,1478847653.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:53.741Z,1478847653.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:54.105Z,1478847654.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:54.161Z,1478847654.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:54.505Z,1478847654.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:54.561Z,1478847654.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:54.905Z,1478847654.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:54.946Z,1478847654.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:55.305Z,1478847655.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:55.345Z,1478847655.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:55.716Z,1478847655.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:55.756Z,1478847655.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:56.105Z,1478847656.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:56.125Z,1478847656.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:56.504Z,1478847656.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:56.558Z,1478847656.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:56.905Z,1478847656.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:56.953Z,1478847656.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:57.305Z,1478847657.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:57.325Z,1478847657.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:57.709Z,1478847657.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:57.748Z,1478847657.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:58.112Z,1478847658.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:58.135Z,1478847658.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:58.514Z,1478847658.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:58.529Z,1478847658.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:58.908Z,1478847658.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:58.953Z,1478847658.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:59.305Z,1478847659.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:59.354Z,1478847659.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:00:59.705Z,1478847659.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:00:59.748Z,1478847659.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:00.105Z,1478847660.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:00.125Z,1478847660.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:00.505Z,1478847660.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:00.525Z,1478847660.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:00.913Z,1478847660.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:00.953Z,1478847660.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:01.290Z,1478847661.290 [NAL9602](INFO): SBD MO Status=2, MOMSN=340, MT Status=2, MTMSN=0
2016-11-11T07:01:01.290Z,1478847661.290 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T07:01:01.311Z,1478847661.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:01.368Z,1478847661.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:01.720Z,1478847661.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:01.751Z,1478847661.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:02.105Z,1478847662.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:02.125Z,1478847662.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:02.513Z,1478847662.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:02.529Z,1478847662.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:02.911Z,1478847662.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:02.939Z,1478847662.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:03.308Z,1478847663.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:03.340Z,1478847663.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:03.708Z,1478847663.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:03.745Z,1478847663.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:04.113Z,1478847664.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:04.148Z,1478847664.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:04.510Z,1478847664.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:04.545Z,1478847664.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:04.905Z,1478847664.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:04.945Z,1478847664.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:05.305Z,1478847665.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:05.343Z,1478847665.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:05.720Z,1478847665.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:05.757Z,1478847665.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:05.766Z,1478847665.766 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T06:56:05.5Z
2016-11-11T07:01:05.766Z,1478847665.766 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T07:01:05.766Z,1478847665.766 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T07:01:06.117Z,1478847666.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:06.134Z,1478847666.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:09.980Z,1478847669.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:10.073Z,1478847670.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:10.138Z,1478847670.138 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0052.lzma
2016-11-11T07:01:10.197Z,1478847670.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:10.229Z,1478847670.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:10.558Z,1478847670.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:10.624Z,1478847670.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:10.939Z,1478847670.939 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0052.lzma.bak
2016-11-11T07:01:10.939Z,1478847670.939 [DataOverHttps](INFO): SBD MOMSN=4555131
2016-11-11T07:01:10.967Z,1478847670.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:11.005Z,1478847671.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:12.361Z,1478847672.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:12.432Z,1478847672.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:12.512Z,1478847672.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:12.573Z,1478847672.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:16.007Z,1478847676.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:16.061Z,1478847676.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:16.208Z,1478847676.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:16.242Z,1478847676.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:16.513Z,1478847676.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:16.549Z,1478847676.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:16.910Z,1478847676.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:16.925Z,1478847676.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:17.313Z,1478847677.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:17.362Z,1478847677.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:17.714Z,1478847677.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:17.805Z,1478847677.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:21.083Z,1478847681.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:21.098Z,1478847681.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:21.175Z,1478847681.175 [DataOverHttps](INFO): Sending 277 bytes from file Logs/20161111T044527/Express0053.lzma
2016-11-11T07:01:21.217Z,1478847681.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:21.240Z,1478847681.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:21.602Z,1478847681.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:21.617Z,1478847681.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:21.965Z,1478847681.965 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0053.lzma.bak
2016-11-11T07:01:21.965Z,1478847681.965 [DataOverHttps](INFO): SBD MOMSN=4555133
2016-11-11T07:01:21.999Z,1478847681.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:22.049Z,1478847682.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:23.254Z,1478847683.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:23.270Z,1478847683.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:23.278Z,1478847683.279 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T07:01:23.279Z,1478847683.279 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T07:01:23.279Z,1478847683.279 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T07:01:23.389Z,1478847683.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:23.450Z,1478847683.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:26.706Z,1478847686.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:26.733Z,1478847686.733 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:26.733Z,1478847686.733 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2016-11-11T07:01:26.733Z,1478847686.733 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:01:26.740Z,1478847686.740 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:26.740Z,1478847686.740 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25
2016-11-11T07:01:26.740Z,1478847686.740 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:01:26.755Z,1478847686.755 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:01:26.783Z,1478847686.783 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:01:26.844Z,1478847686.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:26.920Z,1478847686.920 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:01:26.920Z,1478847686.921 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2016-11-11T07:01:26.921Z,1478847686.921 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:01:26.921Z,1478847686.921 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25
2016-11-11T07:01:27.218Z,1478847687.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:27.243Z,1478847687.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:01:27.248Z,1478847687.248 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:01:27.249Z,1478847687.249 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:01:27.254Z,1478847687.253 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:01:27.259Z,1478847687.259 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:01:27.260Z,1478847687.260 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:01:27.630Z,1478847687.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:27.646Z,1478847687.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:28.013Z,1478847688.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:28.093Z,1478847688.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:28.436Z,1478847688.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:28.457Z,1478847688.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:28.676Z,1478847688.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:28.837Z,1478847688.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:28.852Z,1478847688.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:29.213Z,1478847689.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:29.274Z,1478847689.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:29.297Z,1478847689.297 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:29.297Z,1478847689.297 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 25
2016-11-11T07:01:29.297Z,1478847689.297 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:01:29.328Z,1478847689.328 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:01:29.472Z,1478847689.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:29.624Z,1478847689.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:29.639Z,1478847689.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:29.659Z,1478847689.659 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:01:29.659Z,1478847689.659 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 25
2016-11-11T07:01:30.022Z,1478847690.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:30.070Z,1478847690.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:30.091Z,1478847690.091 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:01:30.091Z,1478847690.091 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:01:30.091Z,1478847690.092 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:01:30.413Z,1478847690.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:30.461Z,1478847690.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:30.813Z,1478847690.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:30.849Z,1478847690.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:31.237Z,1478847691.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:31.259Z,1478847691.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:31.624Z,1478847691.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:31.660Z,1478847691.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:32.013Z,1478847692.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:32.033Z,1478847692.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:32.418Z,1478847692.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:32.433Z,1478847692.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:32.817Z,1478847692.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:32.841Z,1478847692.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:33.220Z,1478847693.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:33.235Z,1478847693.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:33.621Z,1478847693.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:33.641Z,1478847693.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:34.020Z,1478847694.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:34.036Z,1478847694.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:34.421Z,1478847694.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:34.441Z,1478847694.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:34.822Z,1478847694.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:34.836Z,1478847694.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:35.216Z,1478847695.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:35.248Z,1478847695.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:35.621Z,1478847695.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:35.641Z,1478847695.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:36.016Z,1478847696.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:36.049Z,1478847696.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:36.413Z,1478847696.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:36.445Z,1478847696.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:36.813Z,1478847696.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:36.847Z,1478847696.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:37.236Z,1478847697.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:37.251Z,1478847697.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:37.632Z,1478847697.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:37.647Z,1478847697.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:38.025Z,1478847698.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:38.047Z,1478847698.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:38.414Z,1478847698.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:38.445Z,1478847698.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:38.813Z,1478847698.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:38.841Z,1478847698.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:39.213Z,1478847699.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:39.253Z,1478847699.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:39.618Z,1478847699.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:39.645Z,1478847699.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:40.016Z,1478847700.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:40.046Z,1478847700.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:40.423Z,1478847700.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:40.438Z,1478847700.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:40.797Z,1478847700.797 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T07:01:40.824Z,1478847700.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:40.866Z,1478847700.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:41.221Z,1478847701.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:41.241Z,1478847701.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:41.617Z,1478847701.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:41.637Z,1478847701.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:42.013Z,1478847702.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:42.033Z,1478847702.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:42.417Z,1478847702.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:42.461Z,1478847702.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:42.813Z,1478847702.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:42.846Z,1478847702.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:43.217Z,1478847703.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:43.237Z,1478847703.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:43.613Z,1478847703.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:43.661Z,1478847703.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:44.013Z,1478847704.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:44.033Z,1478847704.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:44.413Z,1478847704.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:44.461Z,1478847704.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:44.817Z,1478847704.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:44.866Z,1478847704.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:45.213Z,1478847705.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:45.255Z,1478847705.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:45.617Z,1478847705.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:45.637Z,1478847705.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:46.017Z,1478847706.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:46.032Z,1478847706.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:46.396Z,1478847706.396 [NAL9602](INFO): Powering down
2016-11-11T07:01:46.415Z,1478847706.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:46.431Z,1478847706.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:46.817Z,1478847706.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:46.837Z,1478847706.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:47.213Z,1478847707.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:47.228Z,1478847707.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:47.617Z,1478847707.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:47.632Z,1478847707.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:48.037Z,1478847708.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:48.057Z,1478847708.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:48.410Z,1478847708.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:48.425Z,1478847708.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:48.813Z,1478847708.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:48.854Z,1478847708.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:49.217Z,1478847709.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:49.237Z,1478847709.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:49.617Z,1478847709.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:49.632Z,1478847709.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:50.013Z,1478847710.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:50.033Z,1478847710.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:50.417Z,1478847710.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:50.437Z,1478847710.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:50.813Z,1478847710.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:50.828Z,1478847710.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:51.217Z,1478847711.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:51.232Z,1478847711.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:51.613Z,1478847711.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:51.629Z,1478847711.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:52.017Z,1478847712.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:52.032Z,1478847712.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:52.413Z,1478847712.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:52.433Z,1478847712.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:52.817Z,1478847712.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:52.837Z,1478847712.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:53.213Z,1478847713.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:53.228Z,1478847713.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:53.343Z,1478847713.343 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T07:01:53.343Z,1478847713.343 [Rowe_600LCM] Communications Fault, FailCount= 2
2016-11-11T07:01:53.343Z,1478847713.343 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T07:01:53.617Z,1478847713.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:53.631Z,1478847713.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T07:01:53.632Z,1478847713.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:53.652Z,1478847713.652 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T07:01:53.747Z,1478847713.747 [Rowe_600LCM](INFO): Powering down
2016-11-11T07:01:54.038Z,1478847714.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:54.056Z,1478847714.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T07:01:54.057Z,1478847714.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:54.417Z,1478847714.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:54.432Z,1478847714.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:01:54.433Z,1478847714.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:54.817Z,1478847714.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:54.836Z,1478847714.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:01:54.837Z,1478847714.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:55.217Z,1478847715.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:55.237Z,1478847715.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:01:55.238Z,1478847715.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:55.258Z,1478847715.258 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T07:01:55.258Z,1478847715.258 [Rowe_600LCM] No Fault, FailCount= 2
2016-11-11T07:01:55.363Z,1478847715.363 [Rowe_600LCM](INFO): Initializing
2016-11-11T07:01:55.364Z,1478847715.364 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T07:01:55.364Z,1478847715.364 [Rowe_600LCM](INFO): LCM OK
2016-11-11T07:01:55.364Z,1478847715.364 [Rowe_600LCM](INFO): Powering up
2016-11-11T07:01:55.617Z,1478847715.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:55.632Z,1478847715.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:01:55.633Z,1478847715.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:56.013Z,1478847716.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:56.032Z,1478847716.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:01:56.034Z,1478847716.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:56.417Z,1478847716.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:56.457Z,1478847716.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:01:56.458Z,1478847716.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:56.817Z,1478847716.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:56.836Z,1478847716.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:01:56.838Z,1478847716.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:57.217Z,1478847717.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:57.250Z,1478847717.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:01:57.251Z,1478847717.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:57.614Z,1478847717.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:57.636Z,1478847717.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:01:57.637Z,1478847717.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:58.017Z,1478847718.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:58.032Z,1478847718.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:01:58.033Z,1478847718.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:58.417Z,1478847718.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:58.477Z,1478847718.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:01:58.479Z,1478847718.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:58.817Z,1478847718.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:58.837Z,1478847718.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:01:58.838Z,1478847718.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:59.217Z,1478847719.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:59.265Z,1478847719.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:01:59.266Z,1478847719.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:01:59.496Z,1478847719.496 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T07:01:59.554Z,1478847719.554 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T07:01:59.556Z,1478847719.556 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T07:01:59.557Z,1478847719.557 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T07:01:59.558Z,1478847719.558 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T07:01:59.613Z,1478847719.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:01:59.655Z,1478847719.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:01:59.657Z,1478847719.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:00.017Z,1478847720.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:00.038Z,1478847720.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:00.413Z,1478847720.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:00.429Z,1478847720.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:00.817Z,1478847720.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:00.832Z,1478847720.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:01.215Z,1478847721.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:01.240Z,1478847721.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:01.617Z,1478847721.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:01.637Z,1478847721.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:02.053Z,1478847722.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:02.081Z,1478847722.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:02.414Z,1478847722.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:02.434Z,1478847722.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:02.814Z,1478847722.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:02.834Z,1478847722.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:03.213Z,1478847723.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:03.237Z,1478847723.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:03.613Z,1478847723.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:03.646Z,1478847723.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:04.013Z,1478847724.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:04.033Z,1478847724.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:04.413Z,1478847724.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:04.434Z,1478847724.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:04.813Z,1478847724.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:04.842Z,1478847724.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:05.213Z,1478847725.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:05.241Z,1478847725.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:05.613Z,1478847725.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:05.642Z,1478847725.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:06.013Z,1478847726.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:06.041Z,1478847726.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:06.414Z,1478847726.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:06.450Z,1478847726.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:06.813Z,1478847726.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:06.841Z,1478847726.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:07.221Z,1478847727.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:07.253Z,1478847727.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:07.615Z,1478847727.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:07.649Z,1478847727.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:08.012Z,1478847728.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:08.049Z,1478847728.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:08.414Z,1478847728.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:08.445Z,1478847728.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:08.813Z,1478847728.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:08.845Z,1478847728.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:09.217Z,1478847729.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:09.249Z,1478847729.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:09.613Z,1478847729.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:09.646Z,1478847729.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:10.013Z,1478847730.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:10.045Z,1478847730.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:10.425Z,1478847730.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:10.457Z,1478847730.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:10.817Z,1478847730.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:10.849Z,1478847730.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:11.213Z,1478847731.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:11.222Z,1478847731.222 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T07:02:11.222Z,1478847731.222 [BPC1] Data Fault, FailCount= 1
2016-11-11T07:02:11.222Z,1478847731.222 [BPC1](ERROR): Data Fault
2016-11-11T07:02:11.242Z,1478847731.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:11.279Z,1478847731.279 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T07:02:11.621Z,1478847731.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:11.645Z,1478847731.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:12.023Z,1478847732.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:12.038Z,1478847732.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:12.425Z,1478847732.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:12.440Z,1478847732.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:12.480Z,1478847732.480 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:02:12.480Z,1478847732.480 [BPC1] No Fault, FailCount= 1
2016-11-11T07:02:12.820Z,1478847732.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:12.886Z,1478847732.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:13.220Z,1478847733.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:13.258Z,1478847733.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:13.624Z,1478847733.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:13.640Z,1478847733.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:14.013Z,1478847734.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:14.046Z,1478847734.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:14.428Z,1478847734.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:14.444Z,1478847734.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:14.813Z,1478847734.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:14.845Z,1478847734.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:15.213Z,1478847735.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:15.247Z,1478847735.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:15.613Z,1478847735.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:15.646Z,1478847735.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:16.013Z,1478847736.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:16.045Z,1478847736.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:16.413Z,1478847736.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:16.445Z,1478847736.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:16.813Z,1478847736.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:16.846Z,1478847736.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:17.213Z,1478847737.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:17.245Z,1478847737.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:17.613Z,1478847737.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:17.649Z,1478847737.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:18.013Z,1478847738.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:18.040Z,1478847738.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:18.420Z,1478847738.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:18.453Z,1478847738.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:18.813Z,1478847738.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:18.849Z,1478847738.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:19.213Z,1478847739.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:19.252Z,1478847739.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:19.613Z,1478847739.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:19.649Z,1478847739.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:20.013Z,1478847740.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:20.049Z,1478847740.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:20.432Z,1478847740.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:20.453Z,1478847740.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:20.817Z,1478847740.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:20.850Z,1478847740.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:21.213Z,1478847741.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:21.256Z,1478847741.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:21.613Z,1478847741.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:21.656Z,1478847741.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:22.017Z,1478847742.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:22.053Z,1478847742.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:22.421Z,1478847742.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:22.453Z,1478847742.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:22.821Z,1478847742.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:22.853Z,1478847742.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:23.213Z,1478847743.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:23.253Z,1478847743.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:23.613Z,1478847743.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:23.633Z,1478847743.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:24.017Z,1478847744.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:24.057Z,1478847744.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:27.431Z,1478847747.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:27.509Z,1478847747.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:27.610Z,1478847747.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:27.649Z,1478847747.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:27.985Z,1478847747.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:28.040Z,1478847748.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:28.384Z,1478847748.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:28.400Z,1478847748.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:28.780Z,1478847748.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:28.831Z,1478847748.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:29.188Z,1478847749.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:29.244Z,1478847749.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:29.588Z,1478847749.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:29.604Z,1478847749.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:29.984Z,1478847749.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:30.009Z,1478847750.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:30.392Z,1478847750.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:30.413Z,1478847750.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:30.777Z,1478847750.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:30.809Z,1478847750.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:31.177Z,1478847751.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:31.211Z,1478847751.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:31.581Z,1478847751.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:31.617Z,1478847751.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:31.977Z,1478847751.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:32.009Z,1478847752.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:32.377Z,1478847752.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:32.416Z,1478847752.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:32.777Z,1478847752.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:32.801Z,1478847752.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:33.177Z,1478847753.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:33.213Z,1478847753.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:33.584Z,1478847753.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:33.599Z,1478847753.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:33.977Z,1478847753.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:33.993Z,1478847753.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:34.377Z,1478847754.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:34.397Z,1478847754.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:34.790Z,1478847754.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:34.813Z,1478847754.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:35.180Z,1478847755.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:35.213Z,1478847755.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:35.585Z,1478847755.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:35.605Z,1478847755.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:35.985Z,1478847755.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:36.000Z,1478847756.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:36.389Z,1478847756.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:36.409Z,1478847756.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:36.793Z,1478847756.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:36.808Z,1478847756.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:37.195Z,1478847757.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:37.217Z,1478847757.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:37.578Z,1478847757.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:37.609Z,1478847757.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:37.978Z,1478847757.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:38.009Z,1478847758.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:38.377Z,1478847758.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:38.413Z,1478847758.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:38.777Z,1478847758.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:38.793Z,1478847758.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:39.177Z,1478847759.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:39.193Z,1478847759.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:39.577Z,1478847759.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:39.598Z,1478847759.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:39.980Z,1478847759.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:39.997Z,1478847759.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:40.389Z,1478847760.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:40.405Z,1478847760.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:40.785Z,1478847760.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:40.806Z,1478847760.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:41.184Z,1478847761.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:41.218Z,1478847761.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:41.584Z,1478847761.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:41.645Z,1478847761.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:41.977Z,1478847761.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:42.009Z,1478847762.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:42.377Z,1478847762.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:42.411Z,1478847762.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:42.777Z,1478847762.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:42.830Z,1478847762.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:43.177Z,1478847763.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:43.208Z,1478847763.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:43.577Z,1478847763.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:43.618Z,1478847763.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:43.977Z,1478847763.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:44.025Z,1478847764.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:44.385Z,1478847764.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:44.411Z,1478847764.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:44.777Z,1478847764.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:44.813Z,1478847764.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:45.177Z,1478847765.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:45.205Z,1478847765.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:45.577Z,1478847765.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:45.592Z,1478847765.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:45.981Z,1478847765.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:45.996Z,1478847765.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:46.377Z,1478847766.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:46.397Z,1478847766.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:46.780Z,1478847766.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:46.795Z,1478847766.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:47.180Z,1478847767.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:47.195Z,1478847767.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:47.580Z,1478847767.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:47.604Z,1478847767.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:47.984Z,1478847767.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:47.999Z,1478847767.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:48.391Z,1478847768.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:48.406Z,1478847768.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:48.784Z,1478847768.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:48.800Z,1478847768.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:49.184Z,1478847769.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:49.205Z,1478847769.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:49.585Z,1478847769.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:49.605Z,1478847769.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:49.985Z,1478847769.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:50.000Z,1478847770.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:50.393Z,1478847770.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:50.413Z,1478847770.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:50.777Z,1478847770.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:50.807Z,1478847770.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:51.177Z,1478847771.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:51.209Z,1478847771.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:51.577Z,1478847771.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:51.611Z,1478847771.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:51.978Z,1478847771.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:52.011Z,1478847772.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:52.377Z,1478847772.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:52.403Z,1478847772.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:52.777Z,1478847772.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:52.809Z,1478847772.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:53.181Z,1478847773.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:53.213Z,1478847773.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:53.592Z,1478847773.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:53.608Z,1478847773.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:53.977Z,1478847773.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:54.011Z,1478847774.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:54.392Z,1478847774.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:54.413Z,1478847774.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:54.789Z,1478847774.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:54.811Z,1478847774.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:55.177Z,1478847775.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:55.210Z,1478847775.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:55.577Z,1478847775.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:55.603Z,1478847775.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:55.993Z,1478847775.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:56.061Z,1478847776.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:56.377Z,1478847776.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:56.392Z,1478847776.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:56.777Z,1478847776.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:56.825Z,1478847776.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:57.180Z,1478847777.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:57.195Z,1478847777.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:57.580Z,1478847777.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:57.631Z,1478847777.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:57.982Z,1478847777.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:57.998Z,1478847777.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:58.389Z,1478847778.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:58.449Z,1478847778.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:58.785Z,1478847778.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:58.800Z,1478847778.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:59.183Z,1478847779.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:59.205Z,1478847779.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:59.626Z,1478847779.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:02:59.646Z,1478847779.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:02:59.984Z,1478847779.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:00.017Z,1478847780.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:00.386Z,1478847780.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:00.417Z,1478847780.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:00.797Z,1478847780.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:00.826Z,1478847780.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:01.179Z,1478847781.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:01.213Z,1478847781.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:01.579Z,1478847781.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:01.628Z,1478847781.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:01.980Z,1478847781.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:02.021Z,1478847782.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:02.379Z,1478847782.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:02.427Z,1478847782.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:02.778Z,1478847782.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:02.830Z,1478847782.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:03.187Z,1478847783.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:03.241Z,1478847783.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:03.579Z,1478847783.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:03.621Z,1478847783.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:03.979Z,1478847783.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:04.033Z,1478847784.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:04.391Z,1478847784.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:04.440Z,1478847784.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:04.788Z,1478847784.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:04.812Z,1478847784.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:05.179Z,1478847785.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:05.225Z,1478847785.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:05.580Z,1478847785.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:05.620Z,1478847785.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:05.978Z,1478847785.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:06.021Z,1478847786.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:06.386Z,1478847786.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:06.413Z,1478847786.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:06.788Z,1478847786.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:06.814Z,1478847786.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:07.187Z,1478847787.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:07.217Z,1478847787.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:07.584Z,1478847787.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:07.599Z,1478847787.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:07.997Z,1478847787.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:08.021Z,1478847788.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:08.403Z,1478847788.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:08.425Z,1478847788.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:08.793Z,1478847788.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:08.808Z,1478847788.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:09.177Z,1478847789.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:09.209Z,1478847789.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:09.587Z,1478847789.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:09.626Z,1478847789.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:09.977Z,1478847789.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:10.013Z,1478847790.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:10.385Z,1478847790.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:10.486Z,1478847790.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:10.806Z,1478847790.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:10.833Z,1478847790.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:11.185Z,1478847791.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:11.238Z,1478847791.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:11.627Z,1478847791.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:11.642Z,1478847791.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:12.004Z,1478847792.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:12.054Z,1478847792.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:12.388Z,1478847792.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:12.434Z,1478847792.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:12.788Z,1478847792.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:12.816Z,1478847792.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:13.180Z,1478847793.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:13.223Z,1478847793.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:13.579Z,1478847793.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:13.633Z,1478847793.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:13.984Z,1478847793.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:14.022Z,1478847794.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:14.387Z,1478847794.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:14.414Z,1478847794.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:14.779Z,1478847794.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:14.829Z,1478847794.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:15.179Z,1478847795.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:15.219Z,1478847795.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:15.582Z,1478847795.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:15.638Z,1478847795.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:15.988Z,1478847795.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:16.015Z,1478847796.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:16.387Z,1478847796.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:16.426Z,1478847796.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:16.783Z,1478847796.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:16.847Z,1478847796.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:17.179Z,1478847797.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:17.266Z,1478847797.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:17.579Z,1478847797.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:17.618Z,1478847797.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:17.979Z,1478847797.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:18.025Z,1478847798.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:18.386Z,1478847798.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:18.413Z,1478847798.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:18.779Z,1478847798.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:18.817Z,1478847798.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:19.179Z,1478847799.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:19.217Z,1478847799.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:19.592Z,1478847799.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:19.619Z,1478847799.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:19.986Z,1478847799.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:20.013Z,1478847800.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:20.393Z,1478847800.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:20.413Z,1478847800.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:20.776Z,1478847800.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:20.809Z,1478847800.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:21.177Z,1478847801.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:21.209Z,1478847801.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:21.581Z,1478847801.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:21.606Z,1478847801.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:21.977Z,1478847801.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:22.009Z,1478847802.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:22.377Z,1478847802.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:22.402Z,1478847802.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:22.797Z,1478847802.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:22.825Z,1478847802.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:23.185Z,1478847803.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:23.217Z,1478847803.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:23.577Z,1478847803.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:23.593Z,1478847803.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:23.977Z,1478847803.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:23.997Z,1478847803.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:24.381Z,1478847804.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:24.472Z,1478847804.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:27.794Z,1478847807.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:27.809Z,1478847807.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:27.922Z,1478847807.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:27.998Z,1478847807.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:28.309Z,1478847808.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:28.363Z,1478847808.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:28.703Z,1478847808.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:28.724Z,1478847808.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:29.094Z,1478847809.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:29.142Z,1478847809.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:29.491Z,1478847809.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:29.542Z,1478847809.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:29.898Z,1478847809.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:29.924Z,1478847809.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:30.319Z,1478847810.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:30.341Z,1478847810.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:30.691Z,1478847810.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:30.733Z,1478847810.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:31.091Z,1478847811.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:31.107Z,1478847811.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:31.492Z,1478847811.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:31.537Z,1478847811.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:31.891Z,1478847811.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:31.906Z,1478847811.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:32.296Z,1478847812.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:32.312Z,1478847812.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:32.701Z,1478847812.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:32.737Z,1478847812.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:33.097Z,1478847813.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:33.112Z,1478847813.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:33.499Z,1478847813.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:33.515Z,1478847813.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:33.902Z,1478847813.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:33.917Z,1478847813.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:34.298Z,1478847814.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:34.313Z,1478847814.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:34.705Z,1478847814.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:34.720Z,1478847814.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:35.103Z,1478847815.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:35.118Z,1478847815.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:35.491Z,1478847815.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:35.525Z,1478847815.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:35.891Z,1478847815.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:35.927Z,1478847815.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:36.291Z,1478847816.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:36.321Z,1478847816.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:36.697Z,1478847816.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:36.733Z,1478847816.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:37.091Z,1478847817.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:37.107Z,1478847817.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:37.491Z,1478847817.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:37.536Z,1478847817.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:37.891Z,1478847817.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:37.906Z,1478847817.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:38.306Z,1478847818.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:38.336Z,1478847818.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:38.701Z,1478847818.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:38.738Z,1478847818.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:39.129Z,1478847819.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:39.149Z,1478847819.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:39.506Z,1478847819.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:39.550Z,1478847819.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:39.901Z,1478847819.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:39.916Z,1478847819.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:40.302Z,1478847820.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:40.325Z,1478847820.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:40.702Z,1478847820.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:40.718Z,1478847820.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:41.104Z,1478847821.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:41.136Z,1478847821.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:41.500Z,1478847821.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:41.561Z,1478847821.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:41.900Z,1478847821.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:41.953Z,1478847821.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:42.299Z,1478847822.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:42.329Z,1478847822.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:42.708Z,1478847822.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:42.759Z,1478847822.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:43.113Z,1478847823.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:43.137Z,1478847823.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:43.489Z,1478847823.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:43.541Z,1478847823.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:43.899Z,1478847823.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:43.954Z,1478847823.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:44.302Z,1478847824.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:44.329Z,1478847824.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:44.730Z,1478847824.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:44.754Z,1478847824.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:45.104Z,1478847825.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:45.144Z,1478847825.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:45.494Z,1478847825.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:45.510Z,1478847825.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:45.902Z,1478847825.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:45.918Z,1478847825.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:46.297Z,1478847826.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:46.312Z,1478847826.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:46.701Z,1478847826.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:46.721Z,1478847826.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:47.103Z,1478847827.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:47.119Z,1478847827.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:47.498Z,1478847827.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:47.513Z,1478847827.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:47.891Z,1478847827.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:47.923Z,1478847827.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:48.291Z,1478847828.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:48.325Z,1478847828.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:48.691Z,1478847828.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:48.721Z,1478847828.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:49.091Z,1478847829.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:49.129Z,1478847829.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:49.491Z,1478847829.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:49.525Z,1478847829.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:49.891Z,1478847829.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:49.925Z,1478847829.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:50.291Z,1478847830.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:50.323Z,1478847830.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:50.697Z,1478847830.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:50.730Z,1478847830.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:51.091Z,1478847831.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:51.129Z,1478847831.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:51.497Z,1478847831.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:51.512Z,1478847831.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:51.901Z,1478847831.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:51.921Z,1478847831.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:52.298Z,1478847832.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:52.313Z,1478847832.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:52.702Z,1478847832.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:52.725Z,1478847832.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:53.105Z,1478847833.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:53.120Z,1478847833.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:53.497Z,1478847833.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:53.517Z,1478847833.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:53.899Z,1478847833.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:53.914Z,1478847833.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:54.301Z,1478847834.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:54.322Z,1478847834.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:54.691Z,1478847834.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:54.721Z,1478847834.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:55.097Z,1478847835.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:55.134Z,1478847835.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:55.499Z,1478847835.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:55.526Z,1478847835.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:55.903Z,1478847835.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:55.989Z,1478847835.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:56.147Z,1478847836.147 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T07:03:56.147Z,1478847836.147 [Rowe_600LCM] Communications Fault, FailCount= 3
2016-11-11T07:03:56.147Z,1478847836.148 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T07:03:56.300Z,1478847836.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:56.322Z,1478847836.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.3 s old, using for 20.0 s.
2016-11-11T07:03:56.324Z,1478847836.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:56.344Z,1478847836.344 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T07:03:56.551Z,1478847836.551 [Rowe_600LCM](INFO): Powering down
2016-11-11T07:03:56.698Z,1478847836.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:56.737Z,1478847836.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.7 s old, using for 20.0 s.
2016-11-11T07:03:56.738Z,1478847836.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:57.097Z,1478847837.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:57.111Z,1478847837.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.1 s old, using for 20.0 s.
2016-11-11T07:03:57.112Z,1478847837.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:57.359Z,1478847837.359 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2016-11-11T07:03:57.359Z,1478847837.359 [Rowe_600LCM] Hardware Fault, FailCount= 3
2016-11-11T07:03:57.359Z,1478847837.359 [Rowe_600LCM](ERROR): Hardware Fault
2016-11-11T07:03:57.496Z,1478847837.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:57.540Z,1478847837.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:03:57.542Z,1478847837.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:57.895Z,1478847837.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:57.934Z,1478847837.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2016-11-11T07:03:57.935Z,1478847837.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:57.954Z,1478847837.954 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T07:03:57.955Z,1478847837.954 [Rowe_600LCM] No Fault, FailCount= 3
2016-11-11T07:03:58.167Z,1478847838.167 [Rowe_600LCM](INFO): Initializing
2016-11-11T07:03:58.168Z,1478847838.168 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T07:03:58.168Z,1478847838.168 [Rowe_600LCM](INFO): LCM OK
2016-11-11T07:03:58.168Z,1478847838.168 [Rowe_600LCM](INFO): Powering up
2016-11-11T07:03:58.291Z,1478847838.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:58.305Z,1478847838.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2016-11-11T07:03:58.306Z,1478847838.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:58.702Z,1478847838.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:58.717Z,1478847838.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.7 s old, using for 20.0 s.
2016-11-11T07:03:58.719Z,1478847838.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:59.125Z,1478847839.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:59.174Z,1478847839.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:03:59.176Z,1478847839.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:59.541Z,1478847839.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:59.555Z,1478847839.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:03:59.556Z,1478847839.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:03:59.902Z,1478847839.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:03:59.917Z,1478847839.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2016-11-11T07:03:59.919Z,1478847839.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:00.301Z,1478847840.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:00.320Z,1478847840.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2016-11-11T07:04:00.322Z,1478847840.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:00.717Z,1478847840.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:00.740Z,1478847840.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:04:00.741Z,1478847840.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:01.096Z,1478847841.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:01.111Z,1478847841.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2016-11-11T07:04:01.112Z,1478847841.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:01.495Z,1478847841.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:01.516Z,1478847841.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2016-11-11T07:04:01.517Z,1478847841.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:01.894Z,1478847841.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:01.909Z,1478847841.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2016-11-11T07:04:01.910Z,1478847841.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:02.295Z,1478847842.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:02.321Z,1478847842.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2016-11-11T07:04:02.322Z,1478847842.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:02.349Z,1478847842.349 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T07:04:02.422Z,1478847842.422 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T07:04:02.424Z,1478847842.424 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T07:04:02.425Z,1478847842.425 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T07:04:02.426Z,1478847842.426 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T07:04:02.706Z,1478847842.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:02.724Z,1478847842.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2016-11-11T07:04:02.725Z,1478847842.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:03.102Z,1478847843.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:03.155Z,1478847843.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:03.491Z,1478847843.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:03.540Z,1478847843.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:03.895Z,1478847843.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:03.911Z,1478847843.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:04.295Z,1478847844.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:04.311Z,1478847844.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:04.695Z,1478847844.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:04.710Z,1478847844.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:05.096Z,1478847845.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:05.111Z,1478847845.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:05.495Z,1478847845.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:05.517Z,1478847845.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:05.895Z,1478847845.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:05.912Z,1478847845.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:06.291Z,1478847846.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:06.307Z,1478847846.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:06.695Z,1478847846.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:06.717Z,1478847846.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:07.095Z,1478847847.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:07.111Z,1478847847.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:07.496Z,1478847847.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:07.512Z,1478847847.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:07.895Z,1478847847.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:07.911Z,1478847847.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:08.295Z,1478847848.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:08.311Z,1478847848.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:08.695Z,1478847848.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:08.719Z,1478847848.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:09.095Z,1478847849.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:09.110Z,1478847849.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:09.495Z,1478847849.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:09.512Z,1478847849.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:09.896Z,1478847849.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:09.933Z,1478847849.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:10.295Z,1478847850.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:10.331Z,1478847850.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:10.691Z,1478847850.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:10.706Z,1478847850.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:11.095Z,1478847851.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:11.111Z,1478847851.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:11.495Z,1478847851.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:11.561Z,1478847851.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:11.912Z,1478847851.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:11.944Z,1478847851.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:12.289Z,1478847852.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:12.338Z,1478847852.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:12.689Z,1478847852.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:12.737Z,1478847852.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:13.090Z,1478847853.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:13.121Z,1478847853.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:13.489Z,1478847853.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:13.517Z,1478847853.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:13.889Z,1478847853.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:13.925Z,1478847853.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:14.289Z,1478847854.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:14.309Z,1478847854.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:14.689Z,1478847854.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:14.717Z,1478847854.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:15.089Z,1478847855.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:15.109Z,1478847855.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:15.489Z,1478847855.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:15.525Z,1478847855.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:15.889Z,1478847855.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:15.950Z,1478847855.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:16.289Z,1478847856.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:16.329Z,1478847856.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:16.689Z,1478847856.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:16.704Z,1478847856.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:17.093Z,1478847857.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:17.133Z,1478847857.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:17.496Z,1478847857.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:17.551Z,1478847857.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:17.889Z,1478847857.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:17.916Z,1478847857.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:18.289Z,1478847858.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:18.329Z,1478847858.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:18.689Z,1478847858.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:18.709Z,1478847858.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:19.089Z,1478847859.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:19.104Z,1478847859.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:19.497Z,1478847859.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:19.536Z,1478847859.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:19.892Z,1478847859.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:19.915Z,1478847859.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:20.299Z,1478847860.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:20.321Z,1478847860.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:20.696Z,1478847860.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:20.714Z,1478847860.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:21.101Z,1478847861.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:21.119Z,1478847861.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:21.498Z,1478847861.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:21.516Z,1478847861.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:21.890Z,1478847861.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:21.928Z,1478847861.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:22.289Z,1478847862.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:22.328Z,1478847862.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:22.698Z,1478847862.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:22.730Z,1478847862.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:23.094Z,1478847863.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:23.110Z,1478847863.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:23.492Z,1478847863.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:23.510Z,1478847863.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:23.892Z,1478847863.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:23.947Z,1478847863.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:24.296Z,1478847864.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:24.314Z,1478847864.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:24.701Z,1478847864.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:24.784Z,1478847864.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:28.026Z,1478847868.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:28.106Z,1478847868.106 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:28.106Z,1478847868.106 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2016-11-11T07:04:28.106Z,1478847868.106 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:04:28.130Z,1478847868.130 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:28.131Z,1478847868.131 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26
2016-11-11T07:04:28.131Z,1478847868.131 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:04:28.177Z,1478847868.177 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:04:28.178Z,1478847868.178 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:04:28.218Z,1478847868.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:28.303Z,1478847868.303 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:04:28.303Z,1478847868.303 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2016-11-11T07:04:28.304Z,1478847868.304 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:04:28.304Z,1478847868.304 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26
2016-11-11T07:04:28.609Z,1478847868.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:28.673Z,1478847868.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:04:28.673Z,1478847868.673 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:04:28.674Z,1478847868.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:04:28.678Z,1478847868.678 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:04:28.679Z,1478847868.679 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:04:28.679Z,1478847868.680 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:04:29.009Z,1478847869.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:29.024Z,1478847869.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:29.409Z,1478847869.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:29.473Z,1478847869.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:29.809Z,1478847869.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:29.866Z,1478847869.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:30.209Z,1478847870.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:30.224Z,1478847870.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:30.231Z,1478847870.231 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:30.231Z,1478847870.231 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 26
2016-11-11T07:04:30.231Z,1478847870.231 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:04:30.274Z,1478847870.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:04:30.621Z,1478847870.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:30.636Z,1478847870.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:30.684Z,1478847870.684 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:04:30.684Z,1478847870.684 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 26
2016-11-11T07:04:31.016Z,1478847871.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:31.032Z,1478847871.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:31.037Z,1478847871.037 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:04:31.038Z,1478847871.038 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:04:31.038Z,1478847871.038 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:04:31.419Z,1478847871.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:31.435Z,1478847871.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:31.816Z,1478847871.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:31.837Z,1478847871.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:32.216Z,1478847872.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:32.231Z,1478847872.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:32.616Z,1478847872.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:32.632Z,1478847872.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:33.024Z,1478847873.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:33.040Z,1478847873.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:33.420Z,1478847873.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:33.441Z,1478847873.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:33.809Z,1478847873.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:33.835Z,1478847873.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:34.209Z,1478847874.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:34.241Z,1478847874.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:34.617Z,1478847874.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:34.650Z,1478847874.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:35.009Z,1478847875.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:35.061Z,1478847875.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:35.413Z,1478847875.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:35.428Z,1478847875.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:35.812Z,1478847875.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:35.854Z,1478847875.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:36.214Z,1478847876.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:36.229Z,1478847876.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:36.611Z,1478847876.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:36.643Z,1478847876.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:37.016Z,1478847877.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:37.031Z,1478847877.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:37.415Z,1478847877.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:37.434Z,1478847877.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:37.812Z,1478847877.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:37.840Z,1478847877.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:38.216Z,1478847878.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:38.237Z,1478847878.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:38.621Z,1478847878.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:38.642Z,1478847878.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:39.020Z,1478847879.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:39.036Z,1478847879.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:39.417Z,1478847879.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:39.437Z,1478847879.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:39.816Z,1478847879.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:39.834Z,1478847879.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:40.225Z,1478847880.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:40.241Z,1478847880.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:40.616Z,1478847880.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:40.642Z,1478847880.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:41.009Z,1478847881.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:41.044Z,1478847881.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:41.410Z,1478847881.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:41.437Z,1478847881.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:41.809Z,1478847881.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:41.873Z,1478847881.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:42.214Z,1478847882.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:42.230Z,1478847882.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:42.617Z,1478847882.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:42.637Z,1478847882.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:43.015Z,1478847883.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:43.065Z,1478847883.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:43.415Z,1478847883.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:43.430Z,1478847883.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:43.819Z,1478847883.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:43.872Z,1478847883.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:44.216Z,1478847884.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:44.267Z,1478847884.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:44.621Z,1478847884.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:44.636Z,1478847884.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:45.024Z,1478847885.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:45.040Z,1478847885.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:45.416Z,1478847885.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:45.441Z,1478847885.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:45.809Z,1478847885.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:45.849Z,1478847885.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:46.209Z,1478847886.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:46.229Z,1478847886.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:46.621Z,1478847886.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:46.652Z,1478847886.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:47.014Z,1478847887.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:47.029Z,1478847887.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:47.417Z,1478847887.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:47.437Z,1478847887.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:47.815Z,1478847887.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:47.837Z,1478847887.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:48.214Z,1478847888.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:48.230Z,1478847888.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:48.616Z,1478847888.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:48.632Z,1478847888.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:49.016Z,1478847889.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:49.031Z,1478847889.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:49.417Z,1478847889.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:49.433Z,1478847889.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:49.825Z,1478847889.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:49.840Z,1478847889.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:50.215Z,1478847890.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:50.238Z,1478847890.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:50.620Z,1478847890.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:50.640Z,1478847890.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:51.020Z,1478847891.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:51.040Z,1478847891.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:51.416Z,1478847891.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:51.448Z,1478847891.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:51.822Z,1478847891.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:51.837Z,1478847891.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:52.225Z,1478847892.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:52.245Z,1478847892.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:52.614Z,1478847892.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:52.639Z,1478847892.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:53.014Z,1478847893.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:53.046Z,1478847893.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:53.409Z,1478847893.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:53.446Z,1478847893.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:53.809Z,1478847893.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:53.846Z,1478847893.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:54.217Z,1478847894.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:54.246Z,1478847894.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:54.609Z,1478847894.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:54.650Z,1478847894.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:55.009Z,1478847895.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:55.029Z,1478847895.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:55.409Z,1478847895.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:55.425Z,1478847895.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:55.809Z,1478847895.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:55.829Z,1478847895.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:56.221Z,1478847896.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:56.262Z,1478847896.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:56.615Z,1478847896.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:56.631Z,1478847896.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:57.015Z,1478847897.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:57.030Z,1478847897.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:57.416Z,1478847897.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:57.468Z,1478847897.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:57.816Z,1478847897.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:57.831Z,1478847897.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:58.224Z,1478847898.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:58.278Z,1478847898.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:58.616Z,1478847898.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:58.671Z,1478847898.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:59.016Z,1478847899.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:59.032Z,1478847899.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:59.424Z,1478847899.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:59.439Z,1478847899.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:04:59.809Z,1478847899.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:04:59.849Z,1478847899.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:00.213Z,1478847900.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:00.245Z,1478847900.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:00.609Z,1478847900.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:00.652Z,1478847900.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:01.009Z,1478847901.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:01.052Z,1478847901.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:01.410Z,1478847901.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:01.425Z,1478847901.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:01.809Z,1478847901.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:01.829Z,1478847901.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:02.209Z,1478847902.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:02.229Z,1478847902.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:02.616Z,1478847902.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:02.632Z,1478847902.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:03.017Z,1478847903.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:03.032Z,1478847903.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:03.416Z,1478847903.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:03.437Z,1478847903.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:03.816Z,1478847903.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:03.831Z,1478847903.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:04.217Z,1478847904.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:04.232Z,1478847904.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:04.624Z,1478847904.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:04.640Z,1478847904.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:05.016Z,1478847905.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:05.032Z,1478847905.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:05.409Z,1478847905.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:05.442Z,1478847905.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:05.809Z,1478847905.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:05.845Z,1478847905.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:06.214Z,1478847906.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:06.229Z,1478847906.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:06.609Z,1478847906.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:06.629Z,1478847906.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:07.012Z,1478847907.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:07.033Z,1478847907.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:07.416Z,1478847907.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:07.432Z,1478847907.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:07.815Z,1478847907.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:07.837Z,1478847907.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:08.216Z,1478847908.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:08.231Z,1478847908.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:08.623Z,1478847908.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:08.639Z,1478847908.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:09.016Z,1478847909.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:09.050Z,1478847909.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:09.417Z,1478847909.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:09.432Z,1478847909.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:09.816Z,1478847909.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:09.832Z,1478847909.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:10.209Z,1478847910.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:10.234Z,1478847910.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:10.624Z,1478847910.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:10.685Z,1478847910.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:11.009Z,1478847911.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:11.036Z,1478847911.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:11.413Z,1478847911.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:11.428Z,1478847911.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:11.812Z,1478847911.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:11.863Z,1478847911.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:12.214Z,1478847912.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:12.229Z,1478847912.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:12.621Z,1478847912.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:12.677Z,1478847912.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:13.012Z,1478847913.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:13.052Z,1478847913.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:13.415Z,1478847913.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:13.430Z,1478847913.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:13.815Z,1478847913.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:13.830Z,1478847913.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:14.220Z,1478847914.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:14.235Z,1478847914.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:14.623Z,1478847914.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:14.639Z,1478847914.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:15.017Z,1478847915.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:15.037Z,1478847915.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:15.412Z,1478847915.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:15.435Z,1478847915.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:15.817Z,1478847915.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:15.832Z,1478847915.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:16.209Z,1478847916.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:16.242Z,1478847916.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:16.609Z,1478847916.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:16.634Z,1478847916.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:17.009Z,1478847917.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:17.041Z,1478847917.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:17.409Z,1478847917.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:17.439Z,1478847917.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:17.820Z,1478847917.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:17.836Z,1478847917.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:18.209Z,1478847918.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:18.234Z,1478847918.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:18.609Z,1478847918.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:18.634Z,1478847918.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:19.016Z,1478847919.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:19.039Z,1478847919.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:19.409Z,1478847919.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:19.441Z,1478847919.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:19.809Z,1478847919.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:19.843Z,1478847919.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:20.209Z,1478847920.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:20.234Z,1478847920.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:20.621Z,1478847920.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:20.642Z,1478847920.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:21.014Z,1478847921.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:21.033Z,1478847921.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:21.413Z,1478847921.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:21.429Z,1478847921.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:21.817Z,1478847921.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:21.833Z,1478847921.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:22.215Z,1478847922.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:22.233Z,1478847922.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:22.615Z,1478847922.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:22.634Z,1478847922.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:23.016Z,1478847923.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:23.032Z,1478847923.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:23.417Z,1478847923.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:23.437Z,1478847923.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:23.820Z,1478847923.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:23.877Z,1478847923.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:24.209Z,1478847924.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:24.241Z,1478847924.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:24.609Z,1478847924.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:24.672Z,1478847924.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:25.014Z,1478847925.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:25.045Z,1478847925.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:28.453Z,1478847928.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:28.507Z,1478847928.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:28.606Z,1478847928.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:28.634Z,1478847928.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:28.968Z,1478847928.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:29.013Z,1478847929.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:29.364Z,1478847929.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:29.421Z,1478847929.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:29.764Z,1478847929.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:29.779Z,1478847929.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:30.164Z,1478847930.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:30.179Z,1478847930.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:30.573Z,1478847930.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:30.593Z,1478847930.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:30.964Z,1478847930.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:30.979Z,1478847930.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:31.357Z,1478847931.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:31.389Z,1478847931.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:31.757Z,1478847931.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:31.789Z,1478847931.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:32.157Z,1478847932.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:32.190Z,1478847932.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:32.556Z,1478847932.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:32.590Z,1478847932.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:32.957Z,1478847932.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:32.992Z,1478847932.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:33.357Z,1478847933.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:33.391Z,1478847933.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:33.757Z,1478847933.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:33.787Z,1478847933.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:34.157Z,1478847934.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:34.183Z,1478847934.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:34.557Z,1478847934.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:34.585Z,1478847934.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:34.957Z,1478847934.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:34.991Z,1478847934.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:35.357Z,1478847935.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:35.393Z,1478847935.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:35.757Z,1478847935.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:35.789Z,1478847935.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:36.165Z,1478847936.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:36.191Z,1478847936.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:36.557Z,1478847936.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:36.590Z,1478847936.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:36.957Z,1478847936.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:36.984Z,1478847936.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:37.357Z,1478847937.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:37.393Z,1478847937.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:37.757Z,1478847937.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:37.794Z,1478847937.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:38.165Z,1478847938.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:38.191Z,1478847938.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:38.557Z,1478847938.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:38.597Z,1478847938.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:38.960Z,1478847938.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:38.976Z,1478847938.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:39.362Z,1478847939.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:39.377Z,1478847939.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:39.764Z,1478847939.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:39.785Z,1478847939.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:40.164Z,1478847940.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:40.218Z,1478847940.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:40.564Z,1478847940.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:40.579Z,1478847940.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:40.964Z,1478847940.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:40.979Z,1478847940.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:41.364Z,1478847941.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:41.425Z,1478847941.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:41.765Z,1478847941.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:41.785Z,1478847941.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:42.168Z,1478847942.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:42.219Z,1478847942.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:42.557Z,1478847942.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:42.593Z,1478847942.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:42.957Z,1478847942.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:43.010Z,1478847943.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:43.357Z,1478847943.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:43.410Z,1478847943.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:43.757Z,1478847943.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:43.777Z,1478847943.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:44.157Z,1478847944.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:44.172Z,1478847944.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:44.562Z,1478847944.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:44.577Z,1478847944.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:44.974Z,1478847944.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:45.002Z,1478847945.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:45.364Z,1478847945.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:45.379Z,1478847945.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:45.764Z,1478847945.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:45.779Z,1478847945.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:46.164Z,1478847946.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:46.179Z,1478847946.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:46.559Z,1478847946.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:46.585Z,1478847946.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:46.968Z,1478847946.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:46.989Z,1478847946.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:47.365Z,1478847947.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:47.381Z,1478847947.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:47.765Z,1478847947.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:47.785Z,1478847947.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:48.157Z,1478847948.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:48.182Z,1478847948.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:48.569Z,1478847948.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:48.590Z,1478847948.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:48.957Z,1478847948.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:48.990Z,1478847948.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:49.364Z,1478847949.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:49.387Z,1478847949.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:49.757Z,1478847949.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:49.783Z,1478847949.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:50.157Z,1478847950.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:50.182Z,1478847950.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:50.201Z,1478847950.201 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T07:05:50.561Z,1478847950.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:50.594Z,1478847950.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:50.974Z,1478847950.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:50.990Z,1478847950.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:51.357Z,1478847951.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:51.389Z,1478847951.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:51.757Z,1478847951.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:51.783Z,1478847951.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:52.157Z,1478847952.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:52.182Z,1478847952.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:52.561Z,1478847952.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:52.589Z,1478847952.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:52.969Z,1478847952.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:52.996Z,1478847952.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:53.372Z,1478847953.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:53.388Z,1478847953.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:53.757Z,1478847953.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:53.792Z,1478847953.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:54.172Z,1478847954.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:54.229Z,1478847954.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:54.561Z,1478847954.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:54.594Z,1478847954.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:54.957Z,1478847954.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:54.989Z,1478847954.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:55.361Z,1478847955.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:55.386Z,1478847955.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:55.757Z,1478847955.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:55.790Z,1478847955.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:56.157Z,1478847956.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:56.192Z,1478847956.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:56.557Z,1478847956.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:56.589Z,1478847956.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:56.966Z,1478847956.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:56.997Z,1478847956.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:57.357Z,1478847957.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:57.393Z,1478847957.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:57.757Z,1478847957.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:57.793Z,1478847957.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:58.157Z,1478847958.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:58.193Z,1478847958.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:58.378Z,1478847958.378 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T07:05:58.378Z,1478847958.378 [Rowe_600LCM] Communications Fault, FailCount= 4
2016-11-11T07:05:58.378Z,1478847958.378 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T07:05:58.565Z,1478847958.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:58.582Z,1478847958.582 [BPC1](ERROR): Failed to receive battery data
2016-11-11T07:05:58.582Z,1478847958.582 [BPC1] Communications Fault, FailCount= 1
2016-11-11T07:05:58.582Z,1478847958.582 [BPC1](ERROR): Communications Fault
2016-11-11T07:05:58.600Z,1478847958.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T07:05:58.601Z,1478847958.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:58.646Z,1478847958.646 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T07:05:58.646Z,1478847958.646 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T07:05:58.783Z,1478847958.783 [Rowe_600LCM](INFO): Powering down
2016-11-11T07:05:58.957Z,1478847958.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:58.977Z,1478847958.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T07:05:58.978Z,1478847958.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:59.361Z,1478847959.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:59.381Z,1478847959.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:05:59.382Z,1478847959.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:59.764Z,1478847959.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:05:59.778Z,1478847959.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:05:59.779Z,1478847959.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:05:59.826Z,1478847959.826 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:05:59.826Z,1478847959.826 [BPC1] No Fault, FailCount= 1
2016-11-11T07:06:00.165Z,1478847960.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:00.246Z,1478847960.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2016-11-11T07:06:00.248Z,1478847960.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:00.268Z,1478847960.268 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T07:06:00.268Z,1478847960.268 [Rowe_600LCM] No Fault, FailCount= 4
2016-11-11T07:06:00.399Z,1478847960.399 [Rowe_600LCM](INFO): Initializing
2016-11-11T07:06:00.400Z,1478847960.400 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T07:06:00.400Z,1478847960.400 [Rowe_600LCM](INFO): LCM OK
2016-11-11T07:06:00.400Z,1478847960.400 [Rowe_600LCM](INFO): Powering up
2016-11-11T07:06:00.564Z,1478847960.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:00.579Z,1478847960.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:06:00.581Z,1478847960.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:00.965Z,1478847960.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:00.979Z,1478847960.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:06:00.981Z,1478847960.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:01.360Z,1478847961.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:01.387Z,1478847961.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:06:01.389Z,1478847961.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:01.765Z,1478847961.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:01.781Z,1478847961.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:06:01.782Z,1478847961.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:02.157Z,1478847962.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:02.191Z,1478847962.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:06:02.192Z,1478847962.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:02.557Z,1478847962.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:02.591Z,1478847962.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:06:02.593Z,1478847962.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:02.957Z,1478847962.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:02.989Z,1478847962.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:06:02.990Z,1478847962.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:03.357Z,1478847963.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:03.391Z,1478847963.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:06:03.392Z,1478847963.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:03.757Z,1478847963.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:03.812Z,1478847963.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:06:03.814Z,1478847963.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:04.157Z,1478847964.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:04.189Z,1478847964.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:06:04.190Z,1478847964.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:04.525Z,1478847964.525 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T07:06:04.588Z,1478847964.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:04.635Z,1478847964.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:06:04.637Z,1478847964.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:04.719Z,1478847964.719 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T07:06:04.720Z,1478847964.720 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T07:06:04.721Z,1478847964.721 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T07:06:04.722Z,1478847964.722 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T07:06:04.979Z,1478847964.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:05.009Z,1478847965.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T07:06:05.010Z,1478847965.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:05.365Z,1478847965.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:05.384Z,1478847965.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:05.762Z,1478847965.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:05.786Z,1478847965.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:06.162Z,1478847966.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:06.182Z,1478847966.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:06.565Z,1478847966.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:06.582Z,1478847966.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:06.963Z,1478847966.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:06.986Z,1478847966.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:07.364Z,1478847967.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:07.380Z,1478847967.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:07.768Z,1478847967.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:07.784Z,1478847967.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:08.157Z,1478847968.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:08.189Z,1478847968.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:08.557Z,1478847968.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:08.582Z,1478847968.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:08.964Z,1478847968.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:09.010Z,1478847969.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:09.361Z,1478847969.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:09.401Z,1478847969.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:09.757Z,1478847969.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:09.772Z,1478847969.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:10.163Z,1478847970.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:10.178Z,1478847970.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:10.557Z,1478847970.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:10.577Z,1478847970.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:10.966Z,1478847970.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:11.009Z,1478847971.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:11.372Z,1478847971.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:11.388Z,1478847971.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:11.765Z,1478847971.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:11.785Z,1478847971.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:12.157Z,1478847972.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:12.183Z,1478847972.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:12.561Z,1478847972.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:12.598Z,1478847972.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:12.980Z,1478847972.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:13.001Z,1478847973.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:13.357Z,1478847973.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:13.393Z,1478847973.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:13.757Z,1478847973.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:13.785Z,1478847973.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:14.157Z,1478847974.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:14.213Z,1478847974.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:14.562Z,1478847974.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:14.603Z,1478847974.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:14.965Z,1478847974.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:15.006Z,1478847975.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:15.369Z,1478847975.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:15.384Z,1478847975.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:15.764Z,1478847975.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:15.814Z,1478847975.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:16.164Z,1478847976.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:16.179Z,1478847976.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:16.564Z,1478847976.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:16.615Z,1478847976.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:16.968Z,1478847976.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:17.016Z,1478847977.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:17.369Z,1478847977.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:17.384Z,1478847977.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:17.764Z,1478847977.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:17.785Z,1478847977.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:18.165Z,1478847978.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:18.185Z,1478847978.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:18.557Z,1478847978.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:18.589Z,1478847978.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:18.978Z,1478847978.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:19.013Z,1478847979.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:19.357Z,1478847979.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:19.377Z,1478847979.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:19.760Z,1478847979.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:19.776Z,1478847979.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:20.164Z,1478847980.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:20.179Z,1478847980.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:20.563Z,1478847980.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:20.578Z,1478847980.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:20.964Z,1478847980.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:20.979Z,1478847980.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:21.364Z,1478847981.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:21.385Z,1478847981.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:21.765Z,1478847981.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:21.785Z,1478847981.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:22.157Z,1478847982.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:22.182Z,1478847982.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:22.557Z,1478847982.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:22.582Z,1478847982.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:22.957Z,1478847982.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:22.997Z,1478847982.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:23.357Z,1478847983.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:23.389Z,1478847983.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:23.761Z,1478847983.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:23.787Z,1478847983.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:23.796Z,1478847983.796 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T07:06:23.796Z,1478847983.796 [Default:CheckIn:C.Wait] Stopped
2016-11-11T07:06:23.796Z,1478847983.796 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T07:06:23.796Z,1478847983.796 [Default:CheckIn:D] Running Loop=1
2016-11-11T07:06:24.157Z,1478847984.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:24.184Z,1478847984.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:24.199Z,1478847984.199 [Default:CheckIn:D] Stopped
2016-11-11T07:06:24.199Z,1478847984.199 [Default:CheckIn:E] Running Loop=1
2016-11-11T07:06:24.561Z,1478847984.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:24.597Z,1478847984.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:24.606Z,1478847984.606 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 136.381486 min 
2016-11-11T07:06:24.607Z,1478847984.607 [Default:CheckIn:E] Stopped
2016-11-11T07:06:24.607Z,1478847984.607 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T07:06:24.607Z,1478847984.607 [Default:CheckIn] Stopped
2016-11-11T07:06:24.607Z,1478847984.607 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T07:06:24.607Z,1478847984.607 [Default:CheckIn](INFO): Running loop #14
2016-11-11T07:06:24.608Z,1478847984.608 [Default:CheckIn] Running Loop=14
2016-11-11T07:06:24.608Z,1478847984.608 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T07:06:24.608Z,1478847984.608 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T07:06:24.959Z,1478847984.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:24.998Z,1478847984.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:25.347Z,1478847985.347 [NAL9602](INFO): Powering up
2016-11-11T07:06:25.365Z,1478847985.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:25.393Z,1478847985.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:28.928Z,1478847988.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:29.040Z,1478847989.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:29.142Z,1478847989.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:29.158Z,1478847989.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:29.524Z,1478847989.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:29.552Z,1478847989.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:29.914Z,1478847989.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:29.969Z,1478847989.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:30.314Z,1478847990.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:30.329Z,1478847990.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:30.718Z,1478847990.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:30.763Z,1478847990.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:31.118Z,1478847991.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:31.137Z,1478847991.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:31.523Z,1478847991.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:31.572Z,1478847991.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:31.918Z,1478847991.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:31.948Z,1478847991.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:32.318Z,1478847992.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:32.333Z,1478847992.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:32.717Z,1478847992.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:32.743Z,1478847992.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:33.119Z,1478847993.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:33.135Z,1478847993.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:33.514Z,1478847993.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:33.537Z,1478847993.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:33.914Z,1478847993.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:33.945Z,1478847993.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:34.314Z,1478847994.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:34.345Z,1478847994.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:34.714Z,1478847994.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:34.737Z,1478847994.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:35.114Z,1478847995.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:35.145Z,1478847995.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:35.509Z,1478847995.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:35.538Z,1478847995.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:35.929Z,1478847995.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:35.944Z,1478847995.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:36.293Z,1478847996.293 [NAL9602](INFO): NAL9602 initialized
2016-11-11T07:06:36.310Z,1478847996.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:36.345Z,1478847996.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:36.709Z,1478847996.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:36.745Z,1478847996.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:37.133Z,1478847997.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:37.153Z,1478847997.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:37.553Z,1478847997.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:37.573Z,1478847997.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:37.952Z,1478847997.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:37.979Z,1478847997.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:38.329Z,1478847998.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:38.369Z,1478847998.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:38.726Z,1478847998.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:38.742Z,1478847998.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:39.130Z,1478847999.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:39.145Z,1478847999.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:39.509Z,1478847999.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:39.549Z,1478847999.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:39.909Z,1478847999.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:39.940Z,1478847999.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:40.315Z,1478848000.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:40.351Z,1478848000.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:40.710Z,1478848000.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:40.754Z,1478848000.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:41.125Z,1478848001.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:41.149Z,1478848001.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:41.546Z,1478848001.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:41.589Z,1478848001.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:41.915Z,1478848001.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:41.969Z,1478848001.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:42.323Z,1478848002.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:42.377Z,1478848002.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:42.725Z,1478848002.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:42.760Z,1478848002.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:43.148Z,1478848003.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:43.219Z,1478848003.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:43.531Z,1478848003.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:43.546Z,1478848003.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:43.923Z,1478848003.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:43.975Z,1478848003.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:44.318Z,1478848004.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:44.373Z,1478848004.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:44.714Z,1478848004.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:44.749Z,1478848004.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:45.129Z,1478848005.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:45.145Z,1478848005.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:45.509Z,1478848005.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:45.548Z,1478848005.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:45.909Z,1478848005.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:45.946Z,1478848005.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:46.324Z,1478848006.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:46.344Z,1478848006.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:46.709Z,1478848006.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:46.748Z,1478848006.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:47.109Z,1478848007.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:47.145Z,1478848007.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:47.515Z,1478848007.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:47.551Z,1478848007.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:47.910Z,1478848007.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:47.954Z,1478848007.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:48.309Z,1478848008.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:48.339Z,1478848008.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:48.709Z,1478848008.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:48.727Z,1478848008.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:49.118Z,1478848009.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:49.133Z,1478848009.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:49.523Z,1478848009.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:49.539Z,1478848009.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:49.914Z,1478848009.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:49.938Z,1478848009.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:50.319Z,1478848010.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:50.336Z,1478848010.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:50.714Z,1478848010.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:50.749Z,1478848010.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:51.109Z,1478848011.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:51.145Z,1478848011.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:51.509Z,1478848011.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:51.539Z,1478848011.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:51.909Z,1478848011.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:51.927Z,1478848011.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:52.315Z,1478848012.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:52.353Z,1478848012.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:52.715Z,1478848012.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:52.730Z,1478848012.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:53.123Z,1478848013.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:53.138Z,1478848013.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:53.515Z,1478848013.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:53.534Z,1478848013.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:53.922Z,1478848013.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:53.942Z,1478848013.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:54.340Z,1478848014.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:54.380Z,1478848014.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:54.729Z,1478848014.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:54.757Z,1478848014.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:55.109Z,1478848015.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:55.197Z,1478848015.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:55.517Z,1478848015.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:55.533Z,1478848015.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:55.917Z,1478848015.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:55.973Z,1478848015.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:56.320Z,1478848016.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:56.336Z,1478848016.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:56.717Z,1478848016.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:56.766Z,1478848016.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:57.132Z,1478848017.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:57.177Z,1478848017.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:57.522Z,1478848017.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:57.553Z,1478848017.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:57.924Z,1478848017.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:57.957Z,1478848017.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:58.309Z,1478848018.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:58.381Z,1478848018.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:58.710Z,1478848018.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:58.754Z,1478848018.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:59.127Z,1478848019.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:59.143Z,1478848019.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:59.528Z,1478848019.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:59.543Z,1478848019.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:06:59.940Z,1478848019.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:06:59.976Z,1478848019.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:00.320Z,1478848020.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:00.348Z,1478848020.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:00.714Z,1478848020.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:00.746Z,1478848020.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:01.133Z,1478848021.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:01.148Z,1478848021.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:01.509Z,1478848021.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:01.547Z,1478848021.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:01.924Z,1478848021.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:01.943Z,1478848021.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:02.310Z,1478848022.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:02.349Z,1478848022.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:02.709Z,1478848022.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:02.773Z,1478848022.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:03.109Z,1478848023.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:03.145Z,1478848023.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:03.510Z,1478848023.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:03.537Z,1478848023.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:03.915Z,1478848023.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:03.937Z,1478848023.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:04.318Z,1478848024.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:04.333Z,1478848024.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:04.720Z,1478848024.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:04.743Z,1478848024.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:05.114Z,1478848025.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:05.149Z,1478848025.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:05.517Z,1478848025.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:05.532Z,1478848025.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:05.919Z,1478848025.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:05.935Z,1478848025.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:06.314Z,1478848026.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:06.347Z,1478848026.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:06.719Z,1478848026.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:06.741Z,1478848026.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:07.118Z,1478848027.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:07.148Z,1478848027.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:07.525Z,1478848027.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:07.573Z,1478848027.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:07.914Z,1478848027.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:07.946Z,1478848027.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:08.293Z,1478848028.293 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-11T07:07:08.367Z,1478848028.367 [NAL9602](FAULT): received: 
+CSQ:0

OK0, 2, 0, 0, 0

OK
2016-11-11T07:07:08.367Z,1478848028.367 [NAL9602] Data Fault, FailCount= 3
2016-11-11T07:07:08.367Z,1478848028.367 [NAL9602](ERROR): Data Fault
2016-11-11T07:07:08.384Z,1478848028.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:08.400Z,1478848028.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:08.453Z,1478848028.453 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T07:07:08.692Z,1478848028.693 [NAL9602](INFO): Powering down
2016-11-11T07:07:08.710Z,1478848028.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:08.753Z,1478848028.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:09.109Z,1478848029.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:09.149Z,1478848029.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:09.519Z,1478848029.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:09.573Z,1478848029.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:09.608Z,1478848029.608 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T07:07:09.608Z,1478848029.608 [NAL9602] No Fault, FailCount= 3
2016-11-11T07:07:09.909Z,1478848029.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:09.950Z,1478848029.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:10.309Z,1478848030.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:10.354Z,1478848030.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:10.709Z,1478848030.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:10.755Z,1478848030.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:11.108Z,1478848031.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:11.181Z,1478848031.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:11.546Z,1478848031.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:11.561Z,1478848031.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:11.921Z,1478848031.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:11.936Z,1478848031.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:12.320Z,1478848032.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:12.335Z,1478848032.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:12.723Z,1478848032.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:12.745Z,1478848032.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:13.109Z,1478848033.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:13.141Z,1478848033.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:13.509Z,1478848033.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:13.545Z,1478848033.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:13.893Z,1478848033.893 [NAL9602](INFO): Powering up NAL9602
2016-11-11T07:07:13.910Z,1478848033.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:13.958Z,1478848033.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:14.332Z,1478848034.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:14.348Z,1478848034.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:14.709Z,1478848034.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:14.778Z,1478848034.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:15.109Z,1478848035.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:15.124Z,1478848035.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:15.530Z,1478848035.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:15.561Z,1478848035.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:15.909Z,1478848035.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:15.964Z,1478848035.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:16.349Z,1478848036.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:16.381Z,1478848036.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:16.709Z,1478848036.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:16.743Z,1478848036.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:17.114Z,1478848037.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:17.137Z,1478848037.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:17.509Z,1478848037.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:17.549Z,1478848037.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:17.909Z,1478848037.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:17.943Z,1478848037.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:18.309Z,1478848038.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:18.349Z,1478848038.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:18.709Z,1478848038.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:18.726Z,1478848038.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:19.114Z,1478848039.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:19.198Z,1478848039.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:19.509Z,1478848039.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:19.547Z,1478848039.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:19.918Z,1478848039.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:19.934Z,1478848039.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:20.311Z,1478848040.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:20.345Z,1478848040.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:20.717Z,1478848040.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:20.737Z,1478848040.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:21.109Z,1478848041.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:21.169Z,1478848041.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:21.508Z,1478848041.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:21.549Z,1478848041.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:21.909Z,1478848041.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:21.949Z,1478848041.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:22.308Z,1478848042.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:22.349Z,1478848042.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:22.709Z,1478848042.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:22.751Z,1478848042.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:23.109Z,1478848043.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:23.141Z,1478848043.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:23.509Z,1478848043.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:23.553Z,1478848043.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:23.909Z,1478848043.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:23.935Z,1478848043.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:24.309Z,1478848044.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:24.361Z,1478848044.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:24.722Z,1478848044.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:24.836Z,1478848044.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:25.093Z,1478848045.093 [NAL9602](INFO): NAL9602 initialized
2016-11-11T07:07:25.110Z,1478848045.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:25.128Z,1478848045.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:25.516Z,1478848045.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:25.553Z,1478848045.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:29.125Z,1478848049.125 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T07:07:29.126Z,1478848049.126 [NAL9602] Data Fault, FailCount= 4
2016-11-11T07:07:29.126Z,1478848049.126 [NAL9602](ERROR): Data Fault
2016-11-11T07:07:29.165Z,1478848049.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:29.185Z,1478848049.185 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:29.185Z,1478848049.185 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2016-11-11T07:07:29.185Z,1478848049.185 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:07:29.208Z,1478848049.208 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:29.208Z,1478848049.208 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 27
2016-11-11T07:07:29.208Z,1478848049.208 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:07:29.236Z,1478848049.236 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:07:29.236Z,1478848049.236 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:07:29.237Z,1478848049.237 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T07:07:29.260Z,1478848049.260 [NAL9602](INFO): Powering down
2016-11-11T07:07:29.281Z,1478848049.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:29.368Z,1478848049.368 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:07:29.368Z,1478848049.368 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2016-11-11T07:07:29.368Z,1478848049.368 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:07:29.368Z,1478848049.368 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 27
2016-11-11T07:07:29.673Z,1478848049.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:29.692Z,1478848049.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:07:29.692Z,1478848049.692 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:07:29.692Z,1478848049.693 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:07:29.697Z,1478848049.697 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:07:29.697Z,1478848049.697 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:07:29.698Z,1478848049.698 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:07:30.080Z,1478848050.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:30.101Z,1478848050.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:30.158Z,1478848050.158 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T07:07:30.158Z,1478848050.158 [NAL9602] No Fault, FailCount= 4
2016-11-11T07:07:30.465Z,1478848050.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:30.501Z,1478848050.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:30.865Z,1478848050.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:30.897Z,1478848050.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:31.269Z,1478848051.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:31.295Z,1478848051.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:31.302Z,1478848051.302 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:31.302Z,1478848051.302 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 27
2016-11-11T07:07:31.302Z,1478848051.302 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:07:31.317Z,1478848051.317 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:07:31.665Z,1478848051.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:31.696Z,1478848051.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:31.737Z,1478848051.737 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:07:31.737Z,1478848051.737 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 27
2016-11-11T07:07:32.065Z,1478848052.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:32.110Z,1478848052.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:32.118Z,1478848052.118 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:07:32.119Z,1478848052.119 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:07:32.119Z,1478848052.119 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:07:32.465Z,1478848052.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:32.506Z,1478848052.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:32.873Z,1478848052.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:32.899Z,1478848052.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:33.265Z,1478848053.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:33.297Z,1478848053.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:33.665Z,1478848053.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:33.707Z,1478848053.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:34.070Z,1478848054.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:34.086Z,1478848054.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:34.457Z,1478848054.457 [NAL9602](INFO): Powering up NAL9602
2016-11-11T07:07:34.474Z,1478848054.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:34.513Z,1478848054.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:34.872Z,1478848054.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:34.893Z,1478848054.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:35.268Z,1478848055.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:35.325Z,1478848055.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:35.673Z,1478848055.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:35.696Z,1478848055.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:36.065Z,1478848056.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:36.100Z,1478848056.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:36.465Z,1478848056.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:36.497Z,1478848056.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:36.865Z,1478848056.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:36.912Z,1478848056.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:37.269Z,1478848057.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:37.302Z,1478848057.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:37.665Z,1478848057.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:37.718Z,1478848057.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:38.065Z,1478848058.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:38.080Z,1478848058.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:38.474Z,1478848058.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:38.525Z,1478848058.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:38.868Z,1478848058.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:38.921Z,1478848058.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:39.273Z,1478848059.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:39.297Z,1478848059.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:39.675Z,1478848059.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:39.695Z,1478848059.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:40.072Z,1478848060.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:40.088Z,1478848060.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:40.464Z,1478848060.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:40.501Z,1478848060.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:40.865Z,1478848060.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:40.897Z,1478848060.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:41.278Z,1478848061.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:41.311Z,1478848061.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:41.665Z,1478848061.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:41.691Z,1478848061.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:42.069Z,1478848062.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:42.099Z,1478848062.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:42.465Z,1478848062.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:42.498Z,1478848062.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:42.880Z,1478848062.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:42.913Z,1478848062.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:43.276Z,1478848063.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:43.302Z,1478848063.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:43.665Z,1478848063.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:43.697Z,1478848063.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:44.065Z,1478848064.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:44.115Z,1478848064.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:44.468Z,1478848064.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:44.506Z,1478848064.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:44.865Z,1478848064.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:44.905Z,1478848064.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:45.304Z,1478848065.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:45.320Z,1478848065.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:45.653Z,1478848065.653 [NAL9602](INFO): NAL9602 initialized
2016-11-11T07:07:45.670Z,1478848065.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:45.713Z,1478848065.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:46.069Z,1478848066.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:46.085Z,1478848066.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:46.490Z,1478848066.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:46.517Z,1478848066.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:46.890Z,1478848066.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:46.921Z,1478848066.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:47.302Z,1478848067.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:47.321Z,1478848067.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:47.674Z,1478848067.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:47.709Z,1478848067.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:48.074Z,1478848068.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:48.094Z,1478848068.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:48.486Z,1478848068.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:48.518Z,1478848068.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:48.888Z,1478848068.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:48.929Z,1478848068.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:49.280Z,1478848069.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:49.337Z,1478848069.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:49.676Z,1478848069.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:49.699Z,1478848069.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:50.080Z,1478848070.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:50.095Z,1478848070.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:50.469Z,1478848070.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:50.515Z,1478848070.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:50.881Z,1478848070.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:50.945Z,1478848070.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:51.273Z,1478848071.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:51.311Z,1478848071.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:51.666Z,1478848071.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:51.737Z,1478848071.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:52.069Z,1478848072.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:52.110Z,1478848072.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:52.465Z,1478848072.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:52.506Z,1478848072.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:52.874Z,1478848072.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:52.941Z,1478848072.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:53.292Z,1478848073.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:53.309Z,1478848073.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:53.684Z,1478848073.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:53.714Z,1478848073.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:54.084Z,1478848074.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:54.117Z,1478848074.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:54.478Z,1478848074.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:54.513Z,1478848074.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:54.878Z,1478848074.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:54.903Z,1478848074.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:55.265Z,1478848075.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:55.307Z,1478848075.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:55.665Z,1478848075.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:55.707Z,1478848075.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:56.076Z,1478848076.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:56.104Z,1478848076.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:56.471Z,1478848076.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:56.486Z,1478848076.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:56.885Z,1478848076.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:56.925Z,1478848076.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:57.273Z,1478848077.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:57.318Z,1478848077.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:57.669Z,1478848077.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:57.678Z,1478848077.678 [PNI_TCM](ERROR): CRC does not match. Expected:0x60261 got:0x9382
2016-11-11T07:07:57.720Z,1478848077.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:58.077Z,1478848078.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:58.092Z,1478848078.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:58.479Z,1478848078.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:58.515Z,1478848078.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:58.877Z,1478848078.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:58.886Z,1478848078.886 [PNI_TCM](ERROR): CRC does not match. Expected:0x15782 got:0x355
2016-11-11T07:07:58.924Z,1478848078.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:59.288Z,1478848079.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:59.324Z,1478848079.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:07:59.680Z,1478848079.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:07:59.697Z,1478848079.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:00.073Z,1478848080.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:00.105Z,1478848080.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:00.473Z,1478848080.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:00.492Z,1478848080.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:00.739Z,1478848080.739 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T07:08:00.739Z,1478848080.739 [Rowe_600LCM] Communications Fault, FailCount= 5
2016-11-11T07:08:00.739Z,1478848080.739 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T07:08:00.879Z,1478848080.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:00.914Z,1478848080.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T07:08:00.936Z,1478848080.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:01.000Z,1478848081.000 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T07:08:01.001Z,1478848081.001 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-11-11T07:08:01.148Z,1478848081.148 [Rowe_600LCM](INFO): Powering down
2016-11-11T07:08:01.270Z,1478848081.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:01.308Z,1478848081.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T07:08:01.310Z,1478848081.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:01.667Z,1478848081.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:01.713Z,1478848081.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:08:01.714Z,1478848081.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:02.067Z,1478848082.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:02.118Z,1478848082.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:08:02.119Z,1478848082.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:02.479Z,1478848082.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:02.529Z,1478848082.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:08:02.530Z,1478848082.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:02.877Z,1478848082.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:02.897Z,1478848082.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:08:02.898Z,1478848082.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:03.266Z,1478848083.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:03.306Z,1478848083.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:08:03.307Z,1478848083.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:03.684Z,1478848083.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:03.773Z,1478848083.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2016-11-11T07:08:03.774Z,1478848083.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:04.090Z,1478848084.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:04.137Z,1478848084.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:08:04.138Z,1478848084.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:04.477Z,1478848084.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:04.501Z,1478848084.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:08:04.502Z,1478848084.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:04.875Z,1478848084.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:04.961Z,1478848084.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2016-11-11T07:08:04.962Z,1478848084.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:05.273Z,1478848085.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:05.333Z,1478848085.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:08:05.334Z,1478848085.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:05.679Z,1478848085.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:05.726Z,1478848085.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:08:05.732Z,1478848085.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:06.077Z,1478848086.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:06.129Z,1478848086.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:08:06.130Z,1478848086.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:06.473Z,1478848086.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:06.513Z,1478848086.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:08:06.514Z,1478848086.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:06.893Z,1478848086.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:06.966Z,1478848086.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2016-11-11T07:08:06.967Z,1478848086.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:07.289Z,1478848087.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:07.364Z,1478848087.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2016-11-11T07:08:07.365Z,1478848087.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:07.688Z,1478848087.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:07.707Z,1478848087.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T07:08:07.709Z,1478848087.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:08.084Z,1478848088.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:08.121Z,1478848088.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T07:08:08.122Z,1478848088.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:08.467Z,1478848088.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:08.482Z,1478848088.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T07:08:08.483Z,1478848088.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:08.885Z,1478848088.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:08.921Z,1478848088.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T07:08:08.922Z,1478848088.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:09.269Z,1478848089.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:09.283Z,1478848089.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T07:08:09.285Z,1478848089.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:09.676Z,1478848089.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:09.717Z,1478848089.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T07:08:09.718Z,1478848089.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:10.072Z,1478848090.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:10.087Z,1478848090.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T07:08:10.088Z,1478848090.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:10.472Z,1478848090.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:10.514Z,1478848090.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T07:08:10.515Z,1478848090.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:10.866Z,1478848090.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:10.891Z,1478848090.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T07:08:10.892Z,1478848090.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:11.282Z,1478848091.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:11.297Z,1478848091.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T07:08:11.298Z,1478848091.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:11.668Z,1478848091.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:11.723Z,1478848091.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T07:08:11.724Z,1478848091.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:12.084Z,1478848092.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:12.115Z,1478848092.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T07:08:12.123Z,1478848092.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:12.504Z,1478848092.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:12.527Z,1478848092.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T07:08:12.529Z,1478848092.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:12.881Z,1478848092.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:12.910Z,1478848092.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T07:08:12.911Z,1478848092.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:13.280Z,1478848093.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:13.295Z,1478848093.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T07:08:13.296Z,1478848093.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:13.679Z,1478848093.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:13.728Z,1478848093.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T07:08:13.729Z,1478848093.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:14.067Z,1478848094.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:14.109Z,1478848094.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T07:08:14.110Z,1478848094.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:14.470Z,1478848094.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:14.504Z,1478848094.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T07:08:14.505Z,1478848094.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:14.870Z,1478848094.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:14.914Z,1478848094.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T07:08:14.915Z,1478848094.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:15.267Z,1478848095.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:15.318Z,1478848095.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T07:08:15.319Z,1478848095.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:15.666Z,1478848095.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:15.709Z,1478848095.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T07:08:15.711Z,1478848095.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:16.095Z,1478848096.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:16.118Z,1478848096.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T07:08:16.150Z,1478848096.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:16.468Z,1478848096.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:16.553Z,1478848096.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2016-11-11T07:08:16.554Z,1478848096.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:16.866Z,1478848096.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:16.905Z,1478848096.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T07:08:16.906Z,1478848096.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:17.291Z,1478848097.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:17.349Z,1478848097.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2016-11-11T07:08:17.350Z,1478848097.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:17.678Z,1478848097.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:17.757Z,1478848097.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2016-11-11T07:08:17.758Z,1478848097.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:18.090Z,1478848098.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:18.114Z,1478848098.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T07:08:18.119Z,1478848098.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:18.478Z,1478848098.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:18.537Z,1478848098.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T07:08:18.538Z,1478848098.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:18.875Z,1478848098.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:18.921Z,1478848098.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T07:08:18.922Z,1478848098.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:19.278Z,1478848099.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:19.297Z,1478848099.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T07:08:19.298Z,1478848099.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:19.676Z,1478848099.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:19.704Z,1478848099.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T07:08:19.705Z,1478848099.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:20.076Z,1478848100.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:20.134Z,1478848100.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T07:08:20.135Z,1478848100.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:20.467Z,1478848100.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:20.510Z,1478848100.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:20.880Z,1478848100.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:20.964Z,1478848100.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:21.268Z,1478848101.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:21.309Z,1478848101.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:21.675Z,1478848101.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:21.703Z,1478848101.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:22.093Z,1478848102.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:22.121Z,1478848102.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:22.498Z,1478848102.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:22.551Z,1478848102.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:22.887Z,1478848102.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:22.902Z,1478848102.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:23.291Z,1478848103.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:23.307Z,1478848103.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:23.688Z,1478848103.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:23.709Z,1478848103.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:24.067Z,1478848104.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:24.101Z,1478848104.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:24.469Z,1478848104.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:24.494Z,1478848104.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:24.873Z,1478848104.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:24.900Z,1478848104.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:25.266Z,1478848105.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:25.297Z,1478848105.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:25.670Z,1478848105.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:25.706Z,1478848105.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:29.016Z,1478848109.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:29.077Z,1478848109.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:29.199Z,1478848109.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:29.235Z,1478848109.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:29.569Z,1478848109.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:29.589Z,1478848109.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:29.968Z,1478848109.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:29.983Z,1478848109.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:30.378Z,1478848110.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:30.402Z,1478848110.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:30.768Z,1478848110.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:30.784Z,1478848110.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:31.169Z,1478848111.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:31.203Z,1478848111.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:31.580Z,1478848111.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:31.610Z,1478848111.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:31.984Z,1478848111.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:31.999Z,1478848111.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:32.361Z,1478848112.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:32.381Z,1478848112.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:32.769Z,1478848112.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:32.805Z,1478848112.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:33.169Z,1478848113.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:33.189Z,1478848113.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:33.569Z,1478848113.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:33.618Z,1478848113.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:33.969Z,1478848113.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:33.984Z,1478848113.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:34.373Z,1478848114.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:34.433Z,1478848114.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:34.770Z,1478848114.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:34.848Z,1478848114.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:35.172Z,1478848115.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:35.234Z,1478848115.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:35.572Z,1478848115.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:35.632Z,1478848115.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:35.969Z,1478848115.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:35.989Z,1478848115.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:36.365Z,1478848116.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:36.387Z,1478848116.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:36.776Z,1478848116.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:36.792Z,1478848116.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:37.184Z,1478848117.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:37.205Z,1478848117.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:37.587Z,1478848117.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:37.606Z,1478848117.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:37.961Z,1478848117.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:38.001Z,1478848118.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:38.362Z,1478848118.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:38.381Z,1478848118.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:38.766Z,1478848118.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:38.782Z,1478848118.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:39.165Z,1478848119.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:39.185Z,1478848119.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:39.569Z,1478848119.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:39.584Z,1478848119.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:39.967Z,1478848119.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:39.983Z,1478848119.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:40.384Z,1478848120.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:40.399Z,1478848120.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:40.784Z,1478848120.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:40.803Z,1478848120.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:41.161Z,1478848121.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:41.196Z,1478848121.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:41.565Z,1478848121.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:41.590Z,1478848121.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:41.961Z,1478848121.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:41.994Z,1478848121.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:42.361Z,1478848122.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:42.396Z,1478848122.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:42.771Z,1478848122.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:42.800Z,1478848122.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:43.162Z,1478848123.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:43.193Z,1478848123.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:43.561Z,1478848123.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:43.593Z,1478848123.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:43.965Z,1478848123.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:44.004Z,1478848124.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:44.361Z,1478848124.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:44.402Z,1478848124.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:44.761Z,1478848124.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:44.797Z,1478848124.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:45.161Z,1478848125.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:45.181Z,1478848125.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:45.566Z,1478848125.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:45.585Z,1478848125.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:45.965Z,1478848125.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:45.990Z,1478848125.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:46.371Z,1478848126.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:46.387Z,1478848126.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:46.769Z,1478848126.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:46.784Z,1478848126.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:47.169Z,1478848127.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:47.200Z,1478848127.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:47.561Z,1478848127.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:47.626Z,1478848127.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:47.961Z,1478848127.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:48.023Z,1478848128.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:48.361Z,1478848128.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:48.381Z,1478848128.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:48.780Z,1478848128.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:48.808Z,1478848128.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:49.178Z,1478848129.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:49.231Z,1478848129.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:49.565Z,1478848129.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:49.610Z,1478848129.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:49.993Z,1478848129.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:50.064Z,1478848130.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:50.376Z,1478848130.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:50.433Z,1478848130.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:50.769Z,1478848130.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:50.779Z,1478848130.779 [PNI_TCM](ERROR): CRC does not match. Expected:0x53105 got:0x62357
2016-11-11T07:08:50.817Z,1478848130.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:51.164Z,1478848131.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:51.198Z,1478848131.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:51.569Z,1478848131.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:51.592Z,1478848131.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:51.964Z,1478848131.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:51.989Z,1478848131.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:52.375Z,1478848132.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:52.391Z,1478848132.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:52.761Z,1478848132.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:52.793Z,1478848132.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:53.162Z,1478848133.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:53.192Z,1478848133.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:53.574Z,1478848133.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:53.592Z,1478848133.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:53.971Z,1478848133.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:53.986Z,1478848133.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:54.364Z,1478848134.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:54.390Z,1478848134.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:54.764Z,1478848134.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:54.801Z,1478848134.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:55.182Z,1478848135.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:55.197Z,1478848135.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:55.564Z,1478848135.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:55.605Z,1478848135.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:55.964Z,1478848135.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:56.002Z,1478848136.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:56.362Z,1478848136.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:56.402Z,1478848136.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:56.762Z,1478848136.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:56.796Z,1478848136.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:57.163Z,1478848137.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:57.180Z,1478848137.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:57.561Z,1478848137.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:57.609Z,1478848137.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:57.961Z,1478848137.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:57.980Z,1478848137.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:58.370Z,1478848138.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:58.388Z,1478848138.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:58.781Z,1478848138.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:58.816Z,1478848138.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:59.174Z,1478848139.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:59.205Z,1478848139.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:59.561Z,1478848139.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:59.600Z,1478848139.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:08:59.961Z,1478848139.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:08:59.992Z,1478848139.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:00.364Z,1478848140.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:00.398Z,1478848140.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:00.765Z,1478848140.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:00.806Z,1478848140.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:01.161Z,1478848141.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:01.202Z,1478848141.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:01.562Z,1478848141.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:01.615Z,1478848141.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:01.963Z,1478848141.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:02.001Z,1478848142.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:02.361Z,1478848142.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:02.465Z,1478848142.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:02.761Z,1478848142.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:02.781Z,1478848142.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:03.170Z,1478848143.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:03.185Z,1478848143.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:03.570Z,1478848143.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:03.618Z,1478848143.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:03.968Z,1478848143.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:04.013Z,1478848144.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:04.370Z,1478848144.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:04.423Z,1478848144.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:04.772Z,1478848144.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:04.818Z,1478848144.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:05.167Z,1478848145.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:05.194Z,1478848145.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:05.568Z,1478848145.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:05.601Z,1478848145.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:05.988Z,1478848145.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:05.994Z,1478848145.994 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T07:09:06.018Z,1478848146.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:06.391Z,1478848146.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:06.407Z,1478848146.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:06.764Z,1478848146.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:06.800Z,1478848146.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:07.177Z,1478848147.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:07.213Z,1478848147.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:07.578Z,1478848147.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:07.607Z,1478848147.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:07.966Z,1478848147.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:08.010Z,1478848148.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:08.367Z,1478848148.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:08.382Z,1478848148.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:08.769Z,1478848148.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:08.810Z,1478848148.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:09.170Z,1478848149.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:09.177Z,1478848149.177 [PNI_TCM](ERROR): CRC does not match. Expected:0x54191 got:0x16384
2016-11-11T07:09:09.218Z,1478848149.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:09.572Z,1478848149.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:09.587Z,1478848149.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:09.965Z,1478848149.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:09.985Z,1478848149.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:10.371Z,1478848150.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:10.388Z,1478848150.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:10.763Z,1478848150.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:10.790Z,1478848150.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:11.163Z,1478848151.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:11.194Z,1478848151.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:11.562Z,1478848151.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:11.596Z,1478848151.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:11.962Z,1478848151.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:11.997Z,1478848151.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:12.364Z,1478848152.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:12.370Z,1478848152.370 [PNI_TCM](ERROR): CRC does not match. Expected:0x49313 got:0x49580
2016-11-11T07:09:12.402Z,1478848152.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:12.764Z,1478848152.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:12.801Z,1478848152.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:13.165Z,1478848153.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:13.185Z,1478848153.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:13.566Z,1478848153.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:13.595Z,1478848153.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:13.968Z,1478848153.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:13.983Z,1478848153.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:14.388Z,1478848154.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:14.409Z,1478848154.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:14.772Z,1478848154.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:14.805Z,1478848154.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:15.162Z,1478848155.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:15.197Z,1478848155.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:15.563Z,1478848155.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:15.609Z,1478848155.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:15.966Z,1478848155.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:15.994Z,1478848155.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:16.365Z,1478848156.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:16.408Z,1478848156.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:16.764Z,1478848156.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:16.834Z,1478848156.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:17.170Z,1478848157.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:17.186Z,1478848157.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:17.572Z,1478848157.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:17.593Z,1478848157.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:17.969Z,1478848157.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:18.010Z,1478848158.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:18.363Z,1478848158.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:18.390Z,1478848158.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:18.783Z,1478848158.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:18.835Z,1478848158.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:19.180Z,1478848159.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:19.232Z,1478848159.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:19.561Z,1478848159.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:19.593Z,1478848159.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:19.963Z,1478848159.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:19.997Z,1478848159.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:20.364Z,1478848160.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:20.399Z,1478848160.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:20.761Z,1478848160.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:20.797Z,1478848160.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:21.161Z,1478848161.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:21.199Z,1478848161.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:21.568Z,1478848161.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:21.595Z,1478848161.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:21.964Z,1478848161.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:21.987Z,1478848161.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:22.361Z,1478848162.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:22.404Z,1478848162.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:22.773Z,1478848162.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:22.793Z,1478848162.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:23.166Z,1478848163.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:23.197Z,1478848163.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:23.562Z,1478848163.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:23.596Z,1478848163.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:23.972Z,1478848163.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:23.994Z,1478848163.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:24.361Z,1478848164.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:24.393Z,1478848164.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:24.764Z,1478848164.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:24.797Z,1478848164.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:25.166Z,1478848165.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:25.205Z,1478848165.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:25.559Z,1478848165.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:25.583Z,1478848165.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:25.966Z,1478848165.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:26.008Z,1478848166.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:29.362Z,1478848169.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:29.377Z,1478848169.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:29.493Z,1478848169.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:29.530Z,1478848169.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:29.864Z,1478848169.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:29.879Z,1478848169.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:30.260Z,1478848170.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:30.293Z,1478848170.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:30.660Z,1478848170.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:30.692Z,1478848170.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:31.057Z,1478848171.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:31.133Z,1478848171.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:31.457Z,1478848171.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:31.501Z,1478848171.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:31.872Z,1478848171.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:31.933Z,1478848171.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:32.268Z,1478848172.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:32.301Z,1478848172.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:32.658Z,1478848172.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:32.702Z,1478848172.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:33.057Z,1478848173.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:33.109Z,1478848173.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:33.457Z,1478848173.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:33.477Z,1478848173.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:33.857Z,1478848173.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:33.877Z,1478848173.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:34.257Z,1478848174.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:34.277Z,1478848174.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:34.657Z,1478848174.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:34.677Z,1478848174.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:35.064Z,1478848175.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:35.079Z,1478848175.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:35.461Z,1478848175.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:35.484Z,1478848175.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:35.864Z,1478848175.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:35.885Z,1478848175.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:36.274Z,1478848176.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:36.297Z,1478848176.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:36.670Z,1478848176.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:36.693Z,1478848176.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:37.057Z,1478848177.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:37.091Z,1478848177.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:37.457Z,1478848177.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:37.492Z,1478848177.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:37.857Z,1478848177.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:37.889Z,1478848177.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:38.257Z,1478848178.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:38.290Z,1478848178.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:38.658Z,1478848178.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:38.693Z,1478848178.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:39.057Z,1478848179.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:39.082Z,1478848179.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:39.472Z,1478848179.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:39.493Z,1478848179.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:39.857Z,1478848179.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:39.889Z,1478848179.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:40.279Z,1478848180.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:40.298Z,1478848180.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:40.668Z,1478848180.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:40.697Z,1478848180.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:41.058Z,1478848181.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:41.073Z,1478848181.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:41.461Z,1478848181.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:41.485Z,1478848181.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:41.864Z,1478848181.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:41.885Z,1478848181.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:42.261Z,1478848182.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:42.293Z,1478848182.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:42.657Z,1478848182.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:42.682Z,1478848182.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:43.057Z,1478848183.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:43.082Z,1478848183.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:43.462Z,1478848183.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:43.502Z,1478848183.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:43.857Z,1478848183.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:43.883Z,1478848183.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:44.261Z,1478848184.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:44.287Z,1478848184.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:44.679Z,1478848184.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:44.701Z,1478848184.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:45.072Z,1478848185.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:45.149Z,1478848185.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:45.457Z,1478848185.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:45.500Z,1478848185.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:45.858Z,1478848185.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:45.897Z,1478848185.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:46.257Z,1478848186.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:46.309Z,1478848186.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:46.661Z,1478848186.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:46.701Z,1478848186.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:47.058Z,1478848187.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:47.106Z,1478848187.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:47.457Z,1478848187.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:47.499Z,1478848187.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:47.857Z,1478848187.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:47.904Z,1478848187.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:48.258Z,1478848188.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:48.273Z,1478848188.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:48.657Z,1478848188.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:48.677Z,1478848188.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:49.057Z,1478848189.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:49.077Z,1478848189.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:49.464Z,1478848189.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:49.485Z,1478848189.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:49.860Z,1478848189.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:49.887Z,1478848189.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:50.264Z,1478848190.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:50.279Z,1478848190.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:50.668Z,1478848190.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:50.696Z,1478848190.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:51.061Z,1478848191.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:51.084Z,1478848191.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:51.457Z,1478848191.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:51.493Z,1478848191.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:51.868Z,1478848191.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:51.889Z,1478848191.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:52.257Z,1478848192.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:52.289Z,1478848192.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:52.657Z,1478848192.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:52.695Z,1478848192.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:53.062Z,1478848193.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:53.093Z,1478848193.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:53.476Z,1478848193.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:53.512Z,1478848193.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:53.875Z,1478848193.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:53.890Z,1478848193.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:54.257Z,1478848194.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:54.295Z,1478848194.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:54.658Z,1478848194.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:54.687Z,1478848194.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:55.057Z,1478848195.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:55.103Z,1478848195.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:55.466Z,1478848195.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:55.505Z,1478848195.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:55.861Z,1478848195.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:55.901Z,1478848195.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:56.257Z,1478848196.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:56.299Z,1478848196.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:56.658Z,1478848196.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:56.693Z,1478848196.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:57.058Z,1478848197.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:57.077Z,1478848197.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:57.463Z,1478848197.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:57.481Z,1478848197.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:57.874Z,1478848197.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:57.889Z,1478848197.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:58.268Z,1478848198.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:58.311Z,1478848198.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:58.669Z,1478848198.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:58.692Z,1478848198.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:59.070Z,1478848199.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:59.089Z,1478848199.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:59.471Z,1478848199.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:59.525Z,1478848199.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:09:59.866Z,1478848199.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:09:59.934Z,1478848199.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:00.258Z,1478848200.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:00.294Z,1478848200.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:00.657Z,1478848200.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:00.719Z,1478848200.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:01.068Z,1478848201.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:01.102Z,1478848201.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:01.462Z,1478848201.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:01.524Z,1478848201.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:01.878Z,1478848201.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:01.933Z,1478848201.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:02.280Z,1478848202.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:02.295Z,1478848202.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:02.660Z,1478848202.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:02.693Z,1478848202.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:03.058Z,1478848203.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:03.097Z,1478848203.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:03.458Z,1478848203.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:03.497Z,1478848203.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:03.858Z,1478848203.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:03.890Z,1478848203.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:04.261Z,1478848204.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:04.277Z,1478848204.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:04.657Z,1478848204.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:04.704Z,1478848204.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:05.057Z,1478848205.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:05.075Z,1478848205.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:05.461Z,1478848205.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:05.481Z,1478848205.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:05.873Z,1478848205.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:05.916Z,1478848205.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:06.271Z,1478848206.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:06.312Z,1478848206.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:06.665Z,1478848206.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:06.685Z,1478848206.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:07.064Z,1478848207.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:07.085Z,1478848207.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:07.469Z,1478848207.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:07.484Z,1478848207.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:07.860Z,1478848207.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:07.893Z,1478848207.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:08.264Z,1478848208.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:08.289Z,1478848208.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:08.668Z,1478848208.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:08.695Z,1478848208.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:09.060Z,1478848209.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:09.087Z,1478848209.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:09.457Z,1478848209.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:09.490Z,1478848209.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:09.858Z,1478848209.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:09.888Z,1478848209.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:10.259Z,1478848210.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:10.286Z,1478848210.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:10.660Z,1478848210.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:10.693Z,1478848210.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:11.057Z,1478848211.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:11.089Z,1478848211.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:11.457Z,1478848211.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:11.486Z,1478848211.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:11.859Z,1478848211.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:11.885Z,1478848211.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:12.275Z,1478848212.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:12.290Z,1478848212.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:12.657Z,1478848212.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:12.691Z,1478848212.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:13.057Z,1478848213.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:13.080Z,1478848213.080 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T07:10:13.080Z,1478848213.080 [BPC1] Data Fault, FailCount= 1
2016-11-11T07:10:13.081Z,1478848213.081 [BPC1](ERROR): Data Fault
2016-11-11T07:10:13.105Z,1478848213.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:13.150Z,1478848213.150 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T07:10:13.460Z,1478848213.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:13.493Z,1478848213.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:13.860Z,1478848213.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:13.875Z,1478848213.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:14.257Z,1478848214.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:14.296Z,1478848214.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:14.315Z,1478848214.315 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:10:14.315Z,1478848214.315 [BPC1] No Fault, FailCount= 1
2016-11-11T07:10:14.674Z,1478848214.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:14.750Z,1478848214.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:15.069Z,1478848215.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:15.117Z,1478848215.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:15.463Z,1478848215.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:15.500Z,1478848215.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:15.864Z,1478848215.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:15.903Z,1478848215.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:16.267Z,1478848216.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:16.274Z,1478848216.274 [PNI_TCM](ERROR): CRC does not match. Expected:0x54831 got:0x48712
2016-11-11T07:10:16.312Z,1478848216.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:16.665Z,1478848216.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:16.689Z,1478848216.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:17.067Z,1478848217.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:17.089Z,1478848217.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:17.457Z,1478848217.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:17.490Z,1478848217.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:17.859Z,1478848217.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:17.892Z,1478848217.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:18.260Z,1478848218.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:18.288Z,1478848218.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:18.658Z,1478848218.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:18.686Z,1478848218.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:19.074Z,1478848219.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:19.099Z,1478848219.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:19.473Z,1478848219.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:19.507Z,1478848219.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:19.860Z,1478848219.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:19.885Z,1478848219.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:20.261Z,1478848220.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:20.304Z,1478848220.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:20.658Z,1478848220.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:20.697Z,1478848220.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:21.059Z,1478848221.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:21.066Z,1478848221.066 [PNI_TCM](ERROR): CRC does not match. Expected:0x160 got:0x0
2016-11-11T07:10:21.104Z,1478848221.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:21.460Z,1478848221.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:21.489Z,1478848221.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:21.866Z,1478848221.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:21.880Z,1478848221.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:22.268Z,1478848222.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:22.298Z,1478848222.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:22.667Z,1478848222.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:22.689Z,1478848222.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:23.059Z,1478848223.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:23.091Z,1478848223.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:23.472Z,1478848223.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:23.499Z,1478848223.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:23.884Z,1478848223.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:23.905Z,1478848223.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:24.272Z,1478848224.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:24.309Z,1478848224.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:24.676Z,1478848224.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:24.702Z,1478848224.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:25.061Z,1478848225.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:25.077Z,1478848225.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:25.467Z,1478848225.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:25.482Z,1478848225.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:25.862Z,1478848225.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:25.886Z,1478848225.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:26.268Z,1478848226.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:26.283Z,1478848226.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:29.726Z,1478848229.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:29.820Z,1478848229.820 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:29.820Z,1478848229.820 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2016-11-11T07:10:29.820Z,1478848229.820 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:10:29.839Z,1478848229.839 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:29.839Z,1478848229.839 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 28
2016-11-11T07:10:29.839Z,1478848229.839 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:10:29.868Z,1478848229.868 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:10:29.868Z,1478848229.868 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:10:29.922Z,1478848229.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:29.989Z,1478848229.989 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:10:29.989Z,1478848229.989 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2016-11-11T07:10:29.989Z,1478848229.989 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:10:29.989Z,1478848229.990 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 28
2016-11-11T07:10:30.320Z,1478848230.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:30.352Z,1478848230.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:10:30.353Z,1478848230.353 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:10:30.353Z,1478848230.353 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:10:30.358Z,1478848230.358 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:10:30.358Z,1478848230.358 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:10:30.359Z,1478848230.359 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:10:30.732Z,1478848230.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:30.780Z,1478848230.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2016-11-11T07:10:30.781Z,1478848230.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:31.113Z,1478848231.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:31.134Z,1478848231.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2016-11-11T07:10:31.135Z,1478848231.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:31.509Z,1478848231.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:31.557Z,1478848231.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2016-11-11T07:10:31.558Z,1478848231.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:31.914Z,1478848231.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:31.979Z,1478848231.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2016-11-11T07:10:31.980Z,1478848231.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:32.309Z,1478848232.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:32.340Z,1478848232.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2016-11-11T07:10:32.342Z,1478848232.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:32.349Z,1478848232.349 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:32.349Z,1478848232.349 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 28
2016-11-11T07:10:32.349Z,1478848232.349 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:10:32.364Z,1478848232.364 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:10:32.709Z,1478848232.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:32.744Z,1478848232.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2016-11-11T07:10:32.745Z,1478848232.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:32.764Z,1478848232.764 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:10:32.764Z,1478848232.764 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 28
2016-11-11T07:10:33.110Z,1478848233.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:33.141Z,1478848233.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2016-11-11T07:10:33.142Z,1478848233.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:33.148Z,1478848233.148 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:10:33.149Z,1478848233.149 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:10:33.149Z,1478848233.149 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:10:33.509Z,1478848233.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:33.549Z,1478848233.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2016-11-11T07:10:33.550Z,1478848233.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:33.915Z,1478848233.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:33.929Z,1478848233.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2016-11-11T07:10:33.930Z,1478848233.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:34.324Z,1478848234.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:34.338Z,1478848234.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2016-11-11T07:10:34.340Z,1478848234.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:34.720Z,1478848234.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:34.735Z,1478848234.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2016-11-11T07:10:34.736Z,1478848234.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:35.124Z,1478848235.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:35.145Z,1478848235.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2016-11-11T07:10:35.146Z,1478848235.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:35.524Z,1478848235.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:35.539Z,1478848235.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2016-11-11T07:10:35.540Z,1478848235.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:35.912Z,1478848235.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:35.939Z,1478848235.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2016-11-11T07:10:35.941Z,1478848235.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:36.317Z,1478848236.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:36.336Z,1478848236.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2016-11-11T07:10:36.338Z,1478848236.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:36.720Z,1478848236.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:36.741Z,1478848236.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2016-11-11T07:10:36.742Z,1478848236.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:37.109Z,1478848237.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:37.134Z,1478848237.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2016-11-11T07:10:37.135Z,1478848237.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:37.524Z,1478848237.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:37.539Z,1478848237.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2016-11-11T07:10:37.540Z,1478848237.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:37.914Z,1478848237.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:37.945Z,1478848237.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2016-11-11T07:10:37.946Z,1478848237.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:38.309Z,1478848238.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:38.341Z,1478848238.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2016-11-11T07:10:38.342Z,1478848238.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:38.709Z,1478848238.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:38.744Z,1478848238.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2016-11-11T07:10:38.745Z,1478848238.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:39.109Z,1478848239.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:39.145Z,1478848239.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2016-11-11T07:10:39.146Z,1478848239.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:39.532Z,1478848239.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:39.552Z,1478848239.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2016-11-11T07:10:39.553Z,1478848239.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:39.927Z,1478848239.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:39.957Z,1478848239.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2016-11-11T07:10:39.958Z,1478848239.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:40.336Z,1478848240.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:40.356Z,1478848240.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2016-11-11T07:10:40.357Z,1478848240.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:40.720Z,1478848240.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:40.743Z,1478848240.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2016-11-11T07:10:40.748Z,1478848240.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:41.109Z,1478848241.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:41.128Z,1478848241.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2016-11-11T07:10:41.130Z,1478848241.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:41.510Z,1478848241.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:41.537Z,1478848241.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2016-11-11T07:10:41.538Z,1478848241.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:41.916Z,1478848241.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:41.931Z,1478848241.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2016-11-11T07:10:41.932Z,1478848241.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:42.315Z,1478848242.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:42.336Z,1478848242.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2016-11-11T07:10:42.338Z,1478848242.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:42.720Z,1478848242.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:42.736Z,1478848242.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2016-11-11T07:10:42.737Z,1478848242.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:43.117Z,1478848243.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:43.138Z,1478848243.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2016-11-11T07:10:43.139Z,1478848243.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:43.517Z,1478848243.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:43.532Z,1478848243.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2016-11-11T07:10:43.533Z,1478848243.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:43.930Z,1478848243.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:44.005Z,1478848244.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2016-11-11T07:10:44.006Z,1478848244.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:44.309Z,1478848244.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:44.341Z,1478848244.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2016-11-11T07:10:44.342Z,1478848244.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:44.731Z,1478848244.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:44.778Z,1478848244.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2016-11-11T07:10:44.779Z,1478848244.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:45.137Z,1478848245.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:45.152Z,1478848245.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2016-11-11T07:10:45.153Z,1478848245.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:45.531Z,1478848245.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:45.586Z,1478848245.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2016-11-11T07:10:45.588Z,1478848245.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:45.928Z,1478848245.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:45.970Z,1478848245.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2016-11-11T07:10:45.971Z,1478848245.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:46.314Z,1478848246.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:46.328Z,1478848246.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2016-11-11T07:10:46.329Z,1478848246.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:46.714Z,1478848246.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:46.733Z,1478848246.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2016-11-11T07:10:46.734Z,1478848246.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:47.117Z,1478848247.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:47.136Z,1478848247.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2016-11-11T07:10:47.137Z,1478848247.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:47.517Z,1478848247.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:47.540Z,1478848247.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2016-11-11T07:10:47.542Z,1478848247.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:47.914Z,1478848247.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:47.935Z,1478848247.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2016-11-11T07:10:47.937Z,1478848247.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:48.319Z,1478848248.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:48.334Z,1478848248.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2016-11-11T07:10:48.335Z,1478848248.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:48.719Z,1478848248.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:48.734Z,1478848248.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2016-11-11T07:10:48.735Z,1478848248.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:49.109Z,1478848249.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:49.141Z,1478848249.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2016-11-11T07:10:49.142Z,1478848249.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:49.509Z,1478848249.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:49.545Z,1478848249.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2016-11-11T07:10:49.546Z,1478848249.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:49.932Z,1478848249.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:49.952Z,1478848249.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:50.320Z,1478848250.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:50.356Z,1478848250.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:50.723Z,1478848250.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:50.761Z,1478848250.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:51.123Z,1478848251.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:51.159Z,1478848251.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:51.509Z,1478848251.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:51.550Z,1478848251.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:51.913Z,1478848251.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:51.928Z,1478848251.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:52.313Z,1478848252.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:52.327Z,1478848252.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:52.713Z,1478848252.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:52.728Z,1478848252.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:53.112Z,1478848253.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:53.133Z,1478848253.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:53.517Z,1478848253.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:53.532Z,1478848253.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:53.916Z,1478848253.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:53.931Z,1478848253.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:54.319Z,1478848254.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:54.334Z,1478848254.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:54.717Z,1478848254.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:54.732Z,1478848254.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:55.131Z,1478848255.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:55.146Z,1478848255.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:55.530Z,1478848255.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:55.546Z,1478848255.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:55.932Z,1478848255.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:55.953Z,1478848255.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:56.324Z,1478848256.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:56.350Z,1478848256.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:56.709Z,1478848256.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:56.741Z,1478848256.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:57.109Z,1478848257.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:57.142Z,1478848257.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:57.513Z,1478848257.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:57.539Z,1478848257.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:57.909Z,1478848257.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:57.989Z,1478848257.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:58.309Z,1478848258.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:58.324Z,1478848258.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:58.709Z,1478848258.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:58.757Z,1478848258.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:59.113Z,1478848259.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:59.157Z,1478848259.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:59.509Z,1478848259.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:59.566Z,1478848259.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:10:59.917Z,1478848259.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:10:59.967Z,1478848259.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:00.323Z,1478848260.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:00.365Z,1478848260.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:00.728Z,1478848260.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:00.764Z,1478848260.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:01.124Z,1478848261.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:01.139Z,1478848261.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:01.525Z,1478848261.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:01.545Z,1478848261.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:01.918Z,1478848261.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:01.933Z,1478848261.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:02.312Z,1478848262.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:02.344Z,1478848262.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:02.717Z,1478848262.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:02.737Z,1478848262.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:03.118Z,1478848263.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:03.141Z,1478848263.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:03.509Z,1478848263.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:03.541Z,1478848263.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:03.909Z,1478848263.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:03.943Z,1478848263.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:04.309Z,1478848264.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:04.340Z,1478848264.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:04.709Z,1478848264.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:04.741Z,1478848264.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:05.109Z,1478848265.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:05.142Z,1478848265.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:05.532Z,1478848265.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:05.547Z,1478848265.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:05.924Z,1478848265.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:05.946Z,1478848265.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:06.327Z,1478848266.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:06.342Z,1478848266.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:06.731Z,1478848266.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:06.746Z,1478848266.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:07.109Z,1478848267.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:07.141Z,1478848267.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:07.509Z,1478848267.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:07.544Z,1478848267.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:07.914Z,1478848267.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:07.945Z,1478848267.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:08.318Z,1478848268.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:08.354Z,1478848268.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:08.709Z,1478848268.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:08.752Z,1478848268.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:09.110Z,1478848269.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:09.125Z,1478848269.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:09.509Z,1478848269.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:09.526Z,1478848269.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:09.913Z,1478848269.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:09.929Z,1478848269.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:10.324Z,1478848270.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:10.357Z,1478848270.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:10.724Z,1478848270.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:10.760Z,1478848270.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:11.113Z,1478848271.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:11.133Z,1478848271.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:11.520Z,1478848271.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:11.535Z,1478848271.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:11.914Z,1478848271.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:11.969Z,1478848271.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:12.316Z,1478848272.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:12.353Z,1478848272.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:12.709Z,1478848272.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:12.744Z,1478848272.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:13.113Z,1478848273.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:13.149Z,1478848273.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:13.509Z,1478848273.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:13.557Z,1478848273.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:13.909Z,1478848273.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:13.949Z,1478848273.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:14.309Z,1478848274.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:14.353Z,1478848274.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:14.713Z,1478848274.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:14.761Z,1478848274.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:15.109Z,1478848275.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:15.154Z,1478848275.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:15.517Z,1478848275.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:15.549Z,1478848275.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:15.921Z,1478848275.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:15.961Z,1478848275.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:16.318Z,1478848276.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:16.333Z,1478848276.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:16.720Z,1478848276.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:16.736Z,1478848276.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:17.120Z,1478848277.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:17.136Z,1478848277.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:17.509Z,1478848277.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:17.544Z,1478848277.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:17.917Z,1478848277.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:17.939Z,1478848277.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:18.317Z,1478848278.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:18.338Z,1478848278.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:18.709Z,1478848278.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:18.744Z,1478848278.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:19.109Z,1478848279.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:19.134Z,1478848279.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:19.535Z,1478848279.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:19.550Z,1478848279.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:19.931Z,1478848279.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:19.946Z,1478848279.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:20.309Z,1478848280.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:20.334Z,1478848280.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:20.713Z,1478848280.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:20.745Z,1478848280.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:21.109Z,1478848281.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:21.145Z,1478848281.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:21.514Z,1478848281.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:21.545Z,1478848281.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:21.909Z,1478848281.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:21.949Z,1478848281.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:22.309Z,1478848282.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:22.329Z,1478848282.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:22.714Z,1478848282.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:22.738Z,1478848282.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:23.113Z,1478848283.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:23.135Z,1478848283.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:23.528Z,1478848283.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:23.543Z,1478848283.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:23.927Z,1478848283.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:23.942Z,1478848283.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:24.321Z,1478848284.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:24.341Z,1478848284.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:24.714Z,1478848284.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:24.745Z,1478848284.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:24.758Z,1478848284.758 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T07:06:24.6Z
2016-11-11T07:11:24.758Z,1478848284.758 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T07:11:24.758Z,1478848284.759 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T07:11:25.110Z,1478848285.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:25.149Z,1478848285.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:25.997Z,1478848285.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:26.005Z,1478848286.005 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T07:11:26.005Z,1478848286.006 [BPC1] Data Fault, FailCount= 1
2016-11-11T07:11:26.006Z,1478848286.006 [BPC1](ERROR): Data Fault
2016-11-11T07:11:26.014Z,1478848286.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:26.068Z,1478848286.068 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T07:11:26.123Z,1478848286.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:26.162Z,1478848286.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:29.511Z,1478848289.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:29.527Z,1478848289.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:29.597Z,1478848289.597 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0056.lzma
2016-11-11T07:11:29.656Z,1478848289.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:29.689Z,1478848289.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:29.729Z,1478848289.729 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:11:29.729Z,1478848289.729 [BPC1] No Fault, FailCount= 1
2016-11-11T07:11:30.032Z,1478848290.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:30.115Z,1478848290.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:30.393Z,1478848290.392 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0056.lzma.bak
2016-11-11T07:11:30.393Z,1478848290.393 [DataOverHttps](INFO): SBD MOMSN=4555139
2016-11-11T07:11:30.434Z,1478848290.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:30.474Z,1478848290.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:31.880Z,1478848291.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:31.896Z,1478848291.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:31.997Z,1478848291.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:32.037Z,1478848292.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:35.309Z,1478848295.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:35.336Z,1478848295.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:35.456Z,1478848295.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:35.493Z,1478848295.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:35.804Z,1478848295.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:35.819Z,1478848295.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:36.200Z,1478848296.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:36.221Z,1478848296.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:36.592Z,1478848296.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:36.613Z,1478848296.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:36.997Z,1478848296.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:37.012Z,1478848297.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:40.248Z,1478848300.248 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T07:11:40.265Z,1478848300.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:40.317Z,1478848300.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:40.355Z,1478848300.355 [DataOverHttps](INFO): Sending 403 bytes from file Logs/20161111T044527/Express0057.lzma
2016-11-11T07:11:40.381Z,1478848300.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:40.431Z,1478848300.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:40.781Z,1478848300.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:40.815Z,1478848300.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:41.153Z,1478848301.153 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0057.lzma.bak
2016-11-11T07:11:41.153Z,1478848301.153 [DataOverHttps](INFO): SBD MOMSN=4555141
2016-11-11T07:11:41.189Z,1478848301.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:41.216Z,1478848301.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:42.479Z,1478848302.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:42.561Z,1478848302.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:42.578Z,1478848302.578 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T07:11:42.578Z,1478848302.578 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T07:11:42.578Z,1478848302.578 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T07:11:42.673Z,1478848302.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:42.701Z,1478848302.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:45.861Z,1478848305.861 [NAL9602](INFO): Powering down
2016-11-11T07:11:45.881Z,1478848305.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:45.947Z,1478848305.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:46.059Z,1478848306.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:46.109Z,1478848306.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:46.405Z,1478848306.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:46.462Z,1478848306.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:46.805Z,1478848306.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:46.862Z,1478848306.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:47.209Z,1478848307.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:47.231Z,1478848307.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:47.597Z,1478848307.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:47.612Z,1478848307.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:48.004Z,1478848308.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:48.049Z,1478848308.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:48.397Z,1478848308.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:48.434Z,1478848308.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:48.797Z,1478848308.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:48.829Z,1478848308.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:49.197Z,1478848309.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:49.238Z,1478848309.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:49.597Z,1478848309.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:49.633Z,1478848309.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:49.997Z,1478848309.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:50.032Z,1478848310.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:50.397Z,1478848310.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:50.433Z,1478848310.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:50.798Z,1478848310.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:50.834Z,1478848310.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:51.206Z,1478848311.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:51.261Z,1478848311.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:51.597Z,1478848311.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:51.632Z,1478848311.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:52.009Z,1478848312.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:52.034Z,1478848312.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:52.397Z,1478848312.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:52.442Z,1478848312.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:52.797Z,1478848312.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:52.870Z,1478848312.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:53.209Z,1478848313.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:53.244Z,1478848313.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:53.604Z,1478848313.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:53.621Z,1478848313.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:54.003Z,1478848314.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:54.018Z,1478848314.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:54.401Z,1478848314.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:54.424Z,1478848314.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:54.804Z,1478848314.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:54.824Z,1478848314.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:55.204Z,1478848315.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:55.227Z,1478848315.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:55.606Z,1478848315.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:55.629Z,1478848315.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:55.997Z,1478848315.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:56.031Z,1478848316.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:56.401Z,1478848316.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:56.428Z,1478848316.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:56.802Z,1478848316.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:56.833Z,1478848316.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:57.201Z,1478848317.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:57.232Z,1478848317.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:57.597Z,1478848317.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:57.641Z,1478848317.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:57.997Z,1478848317.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:58.037Z,1478848318.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:58.397Z,1478848318.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:58.412Z,1478848318.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:58.802Z,1478848318.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:58.877Z,1478848318.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:59.199Z,1478848319.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:59.237Z,1478848319.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:11:59.604Z,1478848319.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:11:59.622Z,1478848319.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:00.004Z,1478848320.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:00.054Z,1478848320.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:00.397Z,1478848320.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:00.425Z,1478848320.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:00.797Z,1478848320.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:00.846Z,1478848320.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:01.197Z,1478848321.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:01.234Z,1478848321.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:01.601Z,1478848321.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:01.669Z,1478848321.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:01.997Z,1478848321.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:02.033Z,1478848322.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:02.401Z,1478848322.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:02.428Z,1478848322.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:02.801Z,1478848322.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:02.833Z,1478848322.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:03.197Z,1478848323.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:03.235Z,1478848323.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:03.597Z,1478848323.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:03.639Z,1478848323.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:03.997Z,1478848323.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:04.073Z,1478848324.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:04.402Z,1478848324.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:04.417Z,1478848324.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:04.804Z,1478848324.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:04.824Z,1478848324.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:05.205Z,1478848325.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:05.229Z,1478848325.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:05.604Z,1478848325.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:05.619Z,1478848325.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:06.004Z,1478848326.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:06.019Z,1478848326.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:06.405Z,1478848326.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:06.429Z,1478848326.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:06.797Z,1478848326.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:06.840Z,1478848326.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:07.197Z,1478848327.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:07.241Z,1478848327.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:07.601Z,1478848327.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:07.647Z,1478848327.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:07.997Z,1478848327.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:08.017Z,1478848328.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:08.404Z,1478848328.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:08.429Z,1478848328.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:08.799Z,1478848328.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:08.856Z,1478848328.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:09.204Z,1478848329.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:09.280Z,1478848329.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:09.604Z,1478848329.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:09.632Z,1478848329.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:10.009Z,1478848330.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:10.027Z,1478848330.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:10.397Z,1478848330.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:10.440Z,1478848330.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:10.802Z,1478848330.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:10.830Z,1478848330.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:11.197Z,1478848331.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:11.244Z,1478848331.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:11.601Z,1478848331.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:11.636Z,1478848331.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:11.997Z,1478848331.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:12.041Z,1478848332.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:12.397Z,1478848332.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:12.437Z,1478848332.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:12.797Z,1478848332.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:12.828Z,1478848332.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:13.196Z,1478848333.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:13.237Z,1478848333.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:13.597Z,1478848333.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:13.646Z,1478848333.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:14.003Z,1478848334.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:14.051Z,1478848334.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:14.403Z,1478848334.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:14.418Z,1478848334.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:14.804Z,1478848334.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:14.864Z,1478848334.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:15.208Z,1478848335.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:15.227Z,1478848335.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:15.596Z,1478848335.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:15.642Z,1478848335.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:15.997Z,1478848335.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:16.051Z,1478848336.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:16.397Z,1478848336.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:16.431Z,1478848336.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:16.801Z,1478848336.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:16.837Z,1478848336.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:17.201Z,1478848337.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:17.233Z,1478848337.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:17.597Z,1478848337.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:17.642Z,1478848337.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:17.997Z,1478848337.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:18.046Z,1478848338.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:18.396Z,1478848338.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:18.412Z,1478848338.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:18.797Z,1478848338.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:18.836Z,1478848338.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:19.204Z,1478848339.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:19.227Z,1478848339.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:19.604Z,1478848339.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:19.622Z,1478848339.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:20.004Z,1478848340.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:20.027Z,1478848340.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:20.404Z,1478848340.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:20.446Z,1478848340.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:20.797Z,1478848340.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:20.856Z,1478848340.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:21.197Z,1478848341.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:21.246Z,1478848341.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:21.597Z,1478848341.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:21.612Z,1478848341.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:22.004Z,1478848342.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:22.027Z,1478848342.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:22.403Z,1478848342.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:22.427Z,1478848342.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:22.804Z,1478848342.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:22.827Z,1478848342.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:23.207Z,1478848343.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:23.240Z,1478848343.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:23.608Z,1478848343.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:23.644Z,1478848343.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:23.997Z,1478848343.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:24.063Z,1478848344.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:24.401Z,1478848344.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:24.429Z,1478848344.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:24.797Z,1478848344.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:24.853Z,1478848344.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:25.197Z,1478848345.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:25.255Z,1478848345.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:25.598Z,1478848345.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:25.669Z,1478848345.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:26.012Z,1478848346.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:26.038Z,1478848346.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:26.408Z,1478848346.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:26.429Z,1478848346.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:26.797Z,1478848346.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:26.829Z,1478848346.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:27.197Z,1478848347.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:27.235Z,1478848347.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:27.602Z,1478848347.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:27.657Z,1478848347.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:28.004Z,1478848348.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:28.069Z,1478848348.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:28.412Z,1478848348.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:28.437Z,1478848348.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:28.797Z,1478848348.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:28.845Z,1478848348.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:29.197Z,1478848349.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:29.235Z,1478848349.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:29.597Z,1478848349.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:29.642Z,1478848349.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:29.998Z,1478848349.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:30.074Z,1478848350.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:30.396Z,1478848350.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:30.433Z,1478848350.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:30.796Z,1478848350.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:30.841Z,1478848350.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:31.197Z,1478848351.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:31.237Z,1478848351.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:31.597Z,1478848351.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:31.617Z,1478848351.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:32.009Z,1478848352.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:32.028Z,1478848352.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:32.404Z,1478848352.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:32.426Z,1478848352.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:32.806Z,1478848352.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:32.826Z,1478848352.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:33.208Z,1478848353.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:33.244Z,1478848353.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:33.594Z,1478848353.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:33.644Z,1478848353.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:33.997Z,1478848353.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:34.028Z,1478848354.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:34.397Z,1478848354.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:34.442Z,1478848354.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:34.804Z,1478848354.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:34.819Z,1478848354.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:35.204Z,1478848355.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:35.224Z,1478848355.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:35.613Z,1478848355.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:35.632Z,1478848355.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:36.008Z,1478848356.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:36.025Z,1478848356.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:36.397Z,1478848356.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:36.437Z,1478848356.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:36.804Z,1478848356.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:36.869Z,1478848356.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:37.197Z,1478848357.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:37.266Z,1478848357.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:37.598Z,1478848357.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:37.631Z,1478848357.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:37.998Z,1478848357.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:38.072Z,1478848358.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:38.397Z,1478848358.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:38.441Z,1478848358.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:38.801Z,1478848358.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:38.833Z,1478848358.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:39.207Z,1478848359.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:39.236Z,1478848359.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:39.597Z,1478848359.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:39.642Z,1478848359.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:39.997Z,1478848359.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:40.037Z,1478848360.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:40.397Z,1478848360.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:40.460Z,1478848360.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:40.800Z,1478848360.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:40.815Z,1478848360.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:41.201Z,1478848361.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:41.254Z,1478848361.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:41.601Z,1478848361.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:41.638Z,1478848361.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:42.008Z,1478848362.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:42.076Z,1478848362.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:42.399Z,1478848362.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:42.477Z,1478848362.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:42.809Z,1478848362.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:42.845Z,1478848362.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:43.197Z,1478848363.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:43.241Z,1478848363.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:46.466Z,1478848366.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:46.482Z,1478848366.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:46.576Z,1478848366.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:46.633Z,1478848366.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:46.972Z,1478848366.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:47.012Z,1478848367.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:47.376Z,1478848367.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:47.404Z,1478848367.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:47.773Z,1478848367.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:47.793Z,1478848367.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:48.176Z,1478848368.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:48.191Z,1478848368.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:48.576Z,1478848368.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:48.592Z,1478848368.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:48.977Z,1478848368.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:48.997Z,1478848368.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:49.376Z,1478848369.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:49.391Z,1478848369.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:49.776Z,1478848369.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:49.791Z,1478848369.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:50.184Z,1478848370.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:50.201Z,1478848370.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:50.577Z,1478848370.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:50.592Z,1478848370.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:50.977Z,1478848370.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:50.992Z,1478848370.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:51.384Z,1478848371.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:51.399Z,1478848371.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:51.769Z,1478848371.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:51.802Z,1478848371.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:52.169Z,1478848372.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:52.196Z,1478848372.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:52.573Z,1478848372.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:52.605Z,1478848372.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:52.969Z,1478848372.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:52.997Z,1478848372.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:53.377Z,1478848373.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:53.405Z,1478848373.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:53.781Z,1478848373.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:53.801Z,1478848373.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:54.176Z,1478848374.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:54.193Z,1478848374.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:54.569Z,1478848374.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:54.601Z,1478848374.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:54.969Z,1478848374.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:55.001Z,1478848375.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:55.380Z,1478848375.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:55.400Z,1478848375.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:55.769Z,1478848375.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:55.801Z,1478848375.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:56.177Z,1478848376.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:56.199Z,1478848376.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:56.569Z,1478848376.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:56.594Z,1478848376.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:56.969Z,1478848376.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:56.994Z,1478848376.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:57.385Z,1478848377.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:57.405Z,1478848377.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:57.769Z,1478848377.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:57.801Z,1478848377.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:58.169Z,1478848378.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:58.189Z,1478848378.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:58.571Z,1478848378.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:58.611Z,1478848378.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:58.978Z,1478848378.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:59.109Z,1478848379.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:59.371Z,1478848379.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:59.386Z,1478848379.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:12:59.771Z,1478848379.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:12:59.819Z,1478848379.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:00.175Z,1478848380.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:00.222Z,1478848380.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:00.578Z,1478848380.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:00.598Z,1478848380.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:00.971Z,1478848380.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:01.041Z,1478848381.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:01.371Z,1478848381.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:01.417Z,1478848381.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:01.770Z,1478848381.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:01.786Z,1478848381.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:02.175Z,1478848382.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:02.209Z,1478848382.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:02.571Z,1478848382.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:02.610Z,1478848382.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:03.003Z,1478848383.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:03.043Z,1478848383.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:03.371Z,1478848383.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:03.411Z,1478848383.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:03.770Z,1478848383.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:03.815Z,1478848383.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:04.179Z,1478848384.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:04.207Z,1478848384.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:04.580Z,1478848384.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:04.608Z,1478848384.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:04.971Z,1478848384.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:05.017Z,1478848385.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:05.372Z,1478848385.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:05.412Z,1478848385.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:05.772Z,1478848385.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:05.820Z,1478848385.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:06.176Z,1478848386.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:06.191Z,1478848386.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:06.577Z,1478848386.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:06.592Z,1478848386.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:06.969Z,1478848386.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:06.995Z,1478848386.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:07.371Z,1478848387.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:07.423Z,1478848387.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:07.769Z,1478848387.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:07.822Z,1478848387.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:08.169Z,1478848388.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:08.209Z,1478848388.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:08.576Z,1478848388.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:08.591Z,1478848388.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:08.985Z,1478848388.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:09.022Z,1478848389.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:09.369Z,1478848389.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:09.410Z,1478848389.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:09.795Z,1478848389.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:09.811Z,1478848389.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:10.169Z,1478848390.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:10.184Z,1478848390.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:10.573Z,1478848390.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:10.613Z,1478848390.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:11.015Z,1478848391.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:11.083Z,1478848391.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:11.379Z,1478848391.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:11.398Z,1478848391.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:11.778Z,1478848391.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:11.805Z,1478848391.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:12.176Z,1478848392.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:12.213Z,1478848392.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:12.576Z,1478848392.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:12.612Z,1478848392.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:12.975Z,1478848392.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:13.025Z,1478848393.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:13.371Z,1478848393.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:13.473Z,1478848393.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:13.778Z,1478848393.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:13.853Z,1478848393.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:14.178Z,1478848394.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:14.205Z,1478848394.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:14.570Z,1478848394.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:14.613Z,1478848394.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:14.970Z,1478848394.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:15.013Z,1478848395.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:15.371Z,1478848395.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:15.409Z,1478848395.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:15.770Z,1478848395.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:15.946Z,1478848395.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:16.171Z,1478848396.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:16.214Z,1478848396.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:16.571Z,1478848396.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:16.633Z,1478848396.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:16.971Z,1478848396.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:16.986Z,1478848396.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:17.377Z,1478848397.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:17.402Z,1478848397.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:17.771Z,1478848397.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:17.809Z,1478848397.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:18.171Z,1478848398.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:18.213Z,1478848398.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:18.577Z,1478848398.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:18.624Z,1478848398.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:18.971Z,1478848398.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:19.009Z,1478848399.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:19.369Z,1478848399.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:19.404Z,1478848399.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:19.768Z,1478848399.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:19.793Z,1478848399.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:20.169Z,1478848400.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:20.213Z,1478848400.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:20.569Z,1478848400.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:20.612Z,1478848400.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:20.968Z,1478848400.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:20.984Z,1478848400.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:21.370Z,1478848401.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:21.385Z,1478848401.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:21.769Z,1478848401.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:21.789Z,1478848401.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:22.169Z,1478848402.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:22.195Z,1478848402.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:22.572Z,1478848402.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:22.593Z,1478848402.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:22.972Z,1478848402.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:22.987Z,1478848402.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:23.376Z,1478848403.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:23.392Z,1478848403.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:23.772Z,1478848403.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:23.791Z,1478848403.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:24.173Z,1478848404.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:24.194Z,1478848404.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:24.576Z,1478848404.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:24.592Z,1478848404.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:24.969Z,1478848404.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:25.002Z,1478848405.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:25.369Z,1478848405.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:25.401Z,1478848405.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:25.769Z,1478848405.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:25.809Z,1478848405.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:26.169Z,1478848406.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:26.204Z,1478848406.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:26.577Z,1478848406.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:26.609Z,1478848406.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:26.972Z,1478848406.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:26.988Z,1478848406.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:27.373Z,1478848407.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:27.382Z,1478848407.382 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T07:13:27.382Z,1478848407.382 [BPC1] Data Fault, FailCount= 1
2016-11-11T07:13:27.382Z,1478848407.382 [BPC1](ERROR): Data Fault
2016-11-11T07:13:27.390Z,1478848407.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:27.454Z,1478848407.454 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T07:13:27.772Z,1478848407.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:27.801Z,1478848407.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:28.176Z,1478848408.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:28.191Z,1478848408.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:28.576Z,1478848408.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:28.597Z,1478848408.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:28.617Z,1478848408.616 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:13:28.617Z,1478848408.617 [BPC1] No Fault, FailCount= 1
2016-11-11T07:13:28.973Z,1478848408.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:29.050Z,1478848409.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:29.369Z,1478848409.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:29.425Z,1478848409.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:29.768Z,1478848409.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:29.800Z,1478848409.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:30.169Z,1478848410.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:30.201Z,1478848410.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:30.569Z,1478848410.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:30.600Z,1478848410.601 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:30.601Z,1478848410.601 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2016-11-11T07:13:30.601Z,1478848410.601 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:13:30.608Z,1478848410.608 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:30.608Z,1478848410.608 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 29
2016-11-11T07:13:30.608Z,1478848410.608 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:13:30.623Z,1478848410.624 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:13:30.624Z,1478848410.624 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:13:30.978Z,1478848410.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:31.020Z,1478848411.020 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:13:31.020Z,1478848411.020 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2016-11-11T07:13:31.020Z,1478848411.020 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:13:31.021Z,1478848411.020 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 29
2016-11-11T07:13:31.373Z,1478848411.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:31.388Z,1478848411.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:13:31.389Z,1478848411.389 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:13:31.389Z,1478848411.389 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:13:31.410Z,1478848411.410 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:13:31.410Z,1478848411.410 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:13:31.411Z,1478848411.411 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:13:31.769Z,1478848411.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:31.784Z,1478848411.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:13:31.785Z,1478848411.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:32.175Z,1478848412.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:32.196Z,1478848412.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:13:32.197Z,1478848412.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:32.572Z,1478848412.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:32.599Z,1478848412.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:13:32.600Z,1478848412.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:32.977Z,1478848412.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:32.992Z,1478848412.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:13:32.993Z,1478848412.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:33.369Z,1478848413.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:33.402Z,1478848413.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:13:33.403Z,1478848413.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:33.410Z,1478848413.410 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:33.410Z,1478848413.410 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 29
2016-11-11T07:13:33.410Z,1478848413.410 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:13:33.440Z,1478848413.440 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:13:33.777Z,1478848413.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:33.802Z,1478848413.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:13:33.804Z,1478848413.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:33.823Z,1478848413.823 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:13:33.823Z,1478848413.823 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 29
2016-11-11T07:13:34.169Z,1478848414.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:34.192Z,1478848414.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:13:34.193Z,1478848414.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:34.199Z,1478848414.199 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:13:34.204Z,1478848414.204 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:13:34.204Z,1478848414.204 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:13:34.569Z,1478848414.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:34.611Z,1478848414.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:13:34.612Z,1478848414.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:34.969Z,1478848414.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:35.009Z,1478848415.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:13:35.010Z,1478848415.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:35.369Z,1478848415.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:35.384Z,1478848415.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:13:35.385Z,1478848415.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:35.769Z,1478848415.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:35.788Z,1478848415.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:13:35.789Z,1478848415.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:36.177Z,1478848416.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:36.192Z,1478848416.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:13:36.193Z,1478848416.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:36.576Z,1478848416.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:36.591Z,1478848416.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:13:36.592Z,1478848416.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:36.975Z,1478848416.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:36.991Z,1478848416.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:13:36.992Z,1478848416.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:37.380Z,1478848417.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:37.394Z,1478848417.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T07:13:37.396Z,1478848417.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:37.780Z,1478848417.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:37.801Z,1478848417.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T07:13:37.802Z,1478848417.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:38.176Z,1478848418.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:38.196Z,1478848418.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T07:13:38.197Z,1478848418.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:38.580Z,1478848418.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:38.607Z,1478848418.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T07:13:38.608Z,1478848418.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:38.969Z,1478848418.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:39.003Z,1478848419.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T07:13:39.004Z,1478848419.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:39.369Z,1478848419.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:39.402Z,1478848419.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T07:13:39.403Z,1478848419.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:39.784Z,1478848419.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:39.799Z,1478848419.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T07:13:39.800Z,1478848419.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:40.177Z,1478848420.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:40.209Z,1478848420.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T07:13:40.210Z,1478848420.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:40.569Z,1478848420.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:40.596Z,1478848420.596 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T07:13:40.596Z,1478848420.596 [BPC1] Data Fault, FailCount= 2
2016-11-11T07:13:40.596Z,1478848420.596 [BPC1](ERROR): Data Fault
2016-11-11T07:13:40.603Z,1478848420.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T07:13:40.604Z,1478848420.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:40.624Z,1478848420.624 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T07:13:40.969Z,1478848420.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:41.005Z,1478848421.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T07:13:41.006Z,1478848421.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:41.369Z,1478848421.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:41.409Z,1478848421.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T07:13:41.410Z,1478848421.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:41.769Z,1478848421.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:41.824Z,1478848421.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T07:13:41.825Z,1478848421.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:41.874Z,1478848421.874 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:13:41.874Z,1478848421.875 [BPC1] No Fault, FailCount= 2
2016-11-11T07:13:42.173Z,1478848422.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:42.254Z,1478848422.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2016-11-11T07:13:42.256Z,1478848422.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:42.569Z,1478848422.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:42.593Z,1478848422.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T07:13:42.594Z,1478848422.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:42.977Z,1478848422.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:43.027Z,1478848423.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T07:13:43.028Z,1478848423.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:43.377Z,1478848423.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:43.397Z,1478848423.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T07:13:43.398Z,1478848423.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:46.882Z,1478848426.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:46.906Z,1478848426.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2016-11-11T07:13:46.907Z,1478848426.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:47.016Z,1478848427.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:47.045Z,1478848427.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T07:13:47.046Z,1478848427.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:47.409Z,1478848427.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:47.428Z,1478848427.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T07:13:47.429Z,1478848427.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:47.805Z,1478848427.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:47.821Z,1478848427.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T07:13:47.822Z,1478848427.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:48.207Z,1478848428.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:48.229Z,1478848428.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T07:13:48.230Z,1478848428.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:48.608Z,1478848428.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:48.623Z,1478848428.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T07:13:48.624Z,1478848428.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:49.008Z,1478848429.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:49.024Z,1478848429.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T07:13:49.025Z,1478848429.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:49.408Z,1478848429.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:49.429Z,1478848429.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T07:13:49.430Z,1478848429.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:49.801Z,1478848429.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:49.840Z,1478848429.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T07:13:49.842Z,1478848429.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:50.201Z,1478848430.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:50.216Z,1478848430.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T07:13:50.217Z,1478848430.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:50.601Z,1478848430.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:50.621Z,1478848430.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:51.001Z,1478848431.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:51.021Z,1478848431.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:51.405Z,1478848431.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:51.424Z,1478848431.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:51.808Z,1478848431.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:51.823Z,1478848431.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:52.207Z,1478848432.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:52.233Z,1478848432.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:52.611Z,1478848432.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:52.627Z,1478848432.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:53.012Z,1478848433.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:53.033Z,1478848433.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:53.408Z,1478848433.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:53.429Z,1478848433.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:53.801Z,1478848433.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:53.836Z,1478848433.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:54.201Z,1478848434.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:54.233Z,1478848434.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:54.601Z,1478848434.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:54.654Z,1478848434.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:55.001Z,1478848435.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:55.057Z,1478848435.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:55.401Z,1478848435.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:55.429Z,1478848435.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:55.808Z,1478848435.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:55.859Z,1478848435.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:56.208Z,1478848436.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:56.223Z,1478848436.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:56.608Z,1478848436.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:56.658Z,1478848436.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:57.001Z,1478848437.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:57.042Z,1478848437.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:57.401Z,1478848437.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:57.433Z,1478848437.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:57.801Z,1478848437.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:57.834Z,1478848437.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:58.201Z,1478848438.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:58.226Z,1478848438.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:58.601Z,1478848438.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:58.633Z,1478848438.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:59.001Z,1478848439.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:59.035Z,1478848439.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:59.401Z,1478848439.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:59.434Z,1478848439.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:13:59.801Z,1478848439.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:13:59.833Z,1478848439.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:00.201Z,1478848440.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:00.234Z,1478848440.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:00.601Z,1478848440.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:00.634Z,1478848440.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:01.001Z,1478848441.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:01.033Z,1478848441.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:01.401Z,1478848441.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:01.445Z,1478848441.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:01.801Z,1478848441.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:01.844Z,1478848441.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:02.201Z,1478848442.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:02.216Z,1478848442.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:02.601Z,1478848442.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:02.621Z,1478848442.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:03.001Z,1478848443.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:03.021Z,1478848443.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:03.401Z,1478848443.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:03.416Z,1478848443.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:03.801Z,1478848443.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:03.821Z,1478848443.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:04.205Z,1478848444.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:04.220Z,1478848444.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:04.608Z,1478848444.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:04.624Z,1478848444.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:05.008Z,1478848445.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:05.023Z,1478848445.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:05.408Z,1478848445.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:05.423Z,1478848445.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:05.808Z,1478848445.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:05.823Z,1478848445.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:06.208Z,1478848446.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:06.229Z,1478848446.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:06.612Z,1478848446.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:06.633Z,1478848446.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:07.001Z,1478848447.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:07.033Z,1478848447.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:07.401Z,1478848447.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:07.433Z,1478848447.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:07.809Z,1478848447.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:07.834Z,1478848447.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:08.201Z,1478848448.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:08.210Z,1478848448.210 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T07:14:08.210Z,1478848448.210 [BPC1] Data Fault, FailCount= 1
2016-11-11T07:14:08.210Z,1478848448.210 [BPC1](ERROR): Data Fault
2016-11-11T07:14:08.237Z,1478848448.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:08.288Z,1478848448.288 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T07:14:08.601Z,1478848448.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:08.637Z,1478848448.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:09.001Z,1478848449.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:09.040Z,1478848449.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:09.401Z,1478848449.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:09.424Z,1478848449.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:09.465Z,1478848449.465 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:14:09.465Z,1478848449.465 [BPC1] No Fault, FailCount= 1
2016-11-11T07:14:09.801Z,1478848449.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:09.870Z,1478848449.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:10.201Z,1478848450.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:10.241Z,1478848450.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:10.601Z,1478848450.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:10.646Z,1478848450.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:11.001Z,1478848451.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:11.021Z,1478848451.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:11.409Z,1478848451.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:11.426Z,1478848451.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:11.807Z,1478848451.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:11.822Z,1478848451.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:12.205Z,1478848452.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:12.232Z,1478848452.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:12.604Z,1478848452.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:12.634Z,1478848452.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:13.008Z,1478848453.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:13.024Z,1478848453.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:13.412Z,1478848453.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:13.433Z,1478848453.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:13.801Z,1478848453.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:13.826Z,1478848453.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:14.201Z,1478848454.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:14.227Z,1478848454.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:14.601Z,1478848454.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:14.637Z,1478848454.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:15.005Z,1478848455.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:15.038Z,1478848455.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:15.401Z,1478848455.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:15.461Z,1478848455.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:15.801Z,1478848455.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:15.833Z,1478848455.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:16.205Z,1478848456.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:16.230Z,1478848456.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:16.601Z,1478848456.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:16.624Z,1478848456.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:17.001Z,1478848457.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:17.036Z,1478848457.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:17.401Z,1478848457.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:17.437Z,1478848457.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:17.801Z,1478848457.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:17.821Z,1478848457.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:18.201Z,1478848458.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:18.224Z,1478848458.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:18.601Z,1478848458.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:18.621Z,1478848458.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:19.006Z,1478848459.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:19.022Z,1478848459.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:19.407Z,1478848459.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:19.429Z,1478848459.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:19.805Z,1478848459.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:19.840Z,1478848459.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:20.208Z,1478848460.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:20.224Z,1478848460.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:20.608Z,1478848460.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:20.629Z,1478848460.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:21.001Z,1478848461.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:21.033Z,1478848461.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:21.401Z,1478848461.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:21.444Z,1478848461.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:21.801Z,1478848461.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:21.826Z,1478848461.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:22.201Z,1478848462.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:22.227Z,1478848462.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:22.601Z,1478848462.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:22.661Z,1478848462.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:23.001Z,1478848463.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:23.037Z,1478848463.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:23.405Z,1478848463.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:23.437Z,1478848463.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:23.801Z,1478848463.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:23.853Z,1478848463.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:24.201Z,1478848464.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:24.253Z,1478848464.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:24.601Z,1478848464.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:24.645Z,1478848464.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:25.001Z,1478848465.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:25.049Z,1478848465.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:25.402Z,1478848465.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:25.448Z,1478848465.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:25.802Z,1478848465.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:25.817Z,1478848465.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:26.201Z,1478848466.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:26.217Z,1478848466.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:26.606Z,1478848466.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:26.621Z,1478848466.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:27.009Z,1478848467.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:27.024Z,1478848467.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:27.409Z,1478848467.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:27.424Z,1478848467.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:27.807Z,1478848467.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:27.830Z,1478848467.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:28.208Z,1478848468.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:28.224Z,1478848468.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:28.608Z,1478848468.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:28.624Z,1478848468.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:29.009Z,1478848469.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:29.034Z,1478848469.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:29.398Z,1478848469.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:29.438Z,1478848469.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:29.801Z,1478848469.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:29.834Z,1478848469.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:30.201Z,1478848470.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:30.226Z,1478848470.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:30.601Z,1478848470.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:30.628Z,1478848470.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:31.001Z,1478848471.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:31.040Z,1478848471.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:31.401Z,1478848471.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:31.438Z,1478848471.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:31.801Z,1478848471.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:31.834Z,1478848471.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:32.201Z,1478848472.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:32.241Z,1478848472.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:32.601Z,1478848472.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:32.638Z,1478848472.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:33.001Z,1478848473.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:33.036Z,1478848473.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:33.401Z,1478848473.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:33.429Z,1478848473.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:33.801Z,1478848473.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:33.846Z,1478848473.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:34.201Z,1478848474.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:34.240Z,1478848474.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:34.601Z,1478848474.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:34.638Z,1478848474.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:35.001Z,1478848475.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:35.021Z,1478848475.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:35.401Z,1478848475.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:35.417Z,1478848475.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:35.810Z,1478848475.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:35.861Z,1478848475.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:36.212Z,1478848476.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:36.254Z,1478848476.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:36.608Z,1478848476.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:36.624Z,1478848476.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:37.007Z,1478848477.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:37.065Z,1478848477.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:37.411Z,1478848477.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:37.426Z,1478848477.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:37.812Z,1478848477.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:37.861Z,1478848477.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:38.208Z,1478848478.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:38.225Z,1478848478.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:38.608Z,1478848478.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:38.666Z,1478848478.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:39.012Z,1478848479.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:39.050Z,1478848479.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:39.401Z,1478848479.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:39.443Z,1478848479.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:39.801Z,1478848479.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:39.831Z,1478848479.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:40.201Z,1478848480.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:40.229Z,1478848480.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:40.603Z,1478848480.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:40.630Z,1478848480.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:41.001Z,1478848481.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:41.041Z,1478848481.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:41.401Z,1478848481.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:41.432Z,1478848481.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:41.801Z,1478848481.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:41.834Z,1478848481.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:42.203Z,1478848482.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:42.230Z,1478848482.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:42.601Z,1478848482.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:42.631Z,1478848482.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:43.001Z,1478848483.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:43.029Z,1478848483.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:43.401Z,1478848483.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:43.437Z,1478848483.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:46.844Z,1478848486.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:46.859Z,1478848486.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:46.962Z,1478848486.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:46.997Z,1478848486.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:47.348Z,1478848487.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:47.363Z,1478848487.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:47.747Z,1478848487.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:47.763Z,1478848487.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:48.147Z,1478848488.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:48.162Z,1478848488.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:48.548Z,1478848488.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:48.563Z,1478848488.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:48.944Z,1478848488.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:48.972Z,1478848488.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:49.348Z,1478848489.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:49.363Z,1478848489.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:49.749Z,1478848489.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:49.789Z,1478848489.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:50.152Z,1478848490.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:50.168Z,1478848490.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:50.541Z,1478848490.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:50.605Z,1478848490.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:50.941Z,1478848490.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:50.976Z,1478848490.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:51.349Z,1478848491.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:51.374Z,1478848491.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:51.741Z,1478848491.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:51.792Z,1478848491.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:52.141Z,1478848492.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:52.155Z,1478848492.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:52.541Z,1478848492.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:52.593Z,1478848492.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:52.941Z,1478848492.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:52.997Z,1478848492.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:53.348Z,1478848493.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:53.363Z,1478848493.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:53.749Z,1478848493.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:53.764Z,1478848493.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:54.147Z,1478848494.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:54.162Z,1478848494.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:54.551Z,1478848494.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:54.569Z,1478848494.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:54.944Z,1478848494.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:54.972Z,1478848494.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:55.349Z,1478848495.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:55.364Z,1478848495.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:55.750Z,1478848495.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:55.773Z,1478848495.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:56.148Z,1478848496.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:56.180Z,1478848496.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:56.541Z,1478848496.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:56.567Z,1478848496.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:56.941Z,1478848496.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:56.973Z,1478848496.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:57.341Z,1478848497.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:57.377Z,1478848497.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:57.741Z,1478848497.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:57.777Z,1478848497.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:58.142Z,1478848498.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:58.182Z,1478848498.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:58.542Z,1478848498.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:58.573Z,1478848498.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:58.942Z,1478848498.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:58.957Z,1478848498.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:59.342Z,1478848499.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:59.373Z,1478848499.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:14:59.748Z,1478848499.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:14:59.764Z,1478848499.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:00.152Z,1478848500.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:00.168Z,1478848500.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:00.548Z,1478848500.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:00.569Z,1478848500.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:00.949Z,1478848500.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:00.969Z,1478848500.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:01.341Z,1478848501.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:01.383Z,1478848501.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:01.741Z,1478848501.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:01.779Z,1478848501.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:02.144Z,1478848502.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:02.179Z,1478848502.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:02.546Z,1478848502.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:02.587Z,1478848502.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:02.946Z,1478848502.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:02.967Z,1478848502.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:03.348Z,1478848503.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:03.363Z,1478848503.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:03.748Z,1478848503.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:03.809Z,1478848503.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:04.141Z,1478848504.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:04.175Z,1478848504.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:04.545Z,1478848504.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:04.580Z,1478848504.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:04.941Z,1478848504.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:05.008Z,1478848505.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:05.341Z,1478848505.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:05.382Z,1478848505.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:05.746Z,1478848505.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:05.765Z,1478848505.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:06.146Z,1478848506.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:06.192Z,1478848506.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:06.546Z,1478848506.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:06.561Z,1478848506.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:06.948Z,1478848506.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:07.003Z,1478848507.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:07.345Z,1478848507.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:07.401Z,1478848507.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:07.748Z,1478848507.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:07.770Z,1478848507.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:08.144Z,1478848508.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:08.165Z,1478848508.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:08.547Z,1478848508.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:08.562Z,1478848508.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:08.944Z,1478848508.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:08.975Z,1478848508.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:09.348Z,1478848509.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:09.373Z,1478848509.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:09.741Z,1478848509.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:09.773Z,1478848509.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:10.141Z,1478848510.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:10.177Z,1478848510.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:10.541Z,1478848510.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:10.577Z,1478848510.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:10.941Z,1478848510.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:10.972Z,1478848510.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:11.341Z,1478848511.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:11.374Z,1478848511.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:11.741Z,1478848511.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:11.778Z,1478848511.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:12.141Z,1478848512.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:12.178Z,1478848512.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:12.541Z,1478848512.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:12.578Z,1478848512.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:12.941Z,1478848512.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:12.975Z,1478848512.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:13.341Z,1478848513.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:13.379Z,1478848513.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:13.741Z,1478848513.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:13.777Z,1478848513.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:14.141Z,1478848514.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:14.174Z,1478848514.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:14.552Z,1478848514.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:14.573Z,1478848514.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:14.941Z,1478848514.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:14.979Z,1478848514.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:15.352Z,1478848515.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:15.377Z,1478848515.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:15.746Z,1478848515.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:15.774Z,1478848515.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:16.141Z,1478848516.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:16.174Z,1478848516.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:16.541Z,1478848516.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:16.575Z,1478848516.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:16.941Z,1478848516.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:16.976Z,1478848516.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:17.342Z,1478848517.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:17.360Z,1478848517.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:17.748Z,1478848517.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:17.777Z,1478848517.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:18.147Z,1478848518.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:18.165Z,1478848518.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:18.549Z,1478848518.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:18.614Z,1478848518.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:18.943Z,1478848518.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:18.977Z,1478848518.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:19.345Z,1478848519.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:19.421Z,1478848519.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:19.741Z,1478848519.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:19.780Z,1478848519.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:20.141Z,1478848520.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:20.172Z,1478848520.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:20.544Z,1478848520.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:20.597Z,1478848520.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:20.941Z,1478848520.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:20.984Z,1478848520.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:21.341Z,1478848521.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:21.394Z,1478848521.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:21.740Z,1478848521.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:21.797Z,1478848521.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:22.147Z,1478848522.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:22.162Z,1478848522.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:22.541Z,1478848522.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:22.591Z,1478848522.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:22.944Z,1478848522.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:22.986Z,1478848522.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:23.346Z,1478848523.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:23.391Z,1478848523.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:23.746Z,1478848523.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:23.761Z,1478848523.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:24.145Z,1478848524.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:24.186Z,1478848524.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:24.548Z,1478848524.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:24.567Z,1478848524.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:24.951Z,1478848524.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:24.965Z,1478848524.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:25.351Z,1478848525.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:25.378Z,1478848525.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:25.748Z,1478848525.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:25.781Z,1478848525.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:26.138Z,1478848526.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:26.175Z,1478848526.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:26.543Z,1478848526.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:26.559Z,1478848526.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:26.943Z,1478848526.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:26.988Z,1478848526.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:27.341Z,1478848527.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:27.381Z,1478848527.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:27.746Z,1478848527.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:27.780Z,1478848527.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:28.143Z,1478848528.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:28.165Z,1478848528.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:28.550Z,1478848528.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:28.565Z,1478848528.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:28.949Z,1478848528.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:28.978Z,1478848528.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:29.350Z,1478848529.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:29.366Z,1478848529.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:29.750Z,1478848529.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:29.765Z,1478848529.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:30.146Z,1478848530.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:30.177Z,1478848530.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:30.541Z,1478848530.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:30.573Z,1478848530.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:30.943Z,1478848530.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:30.970Z,1478848530.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:31.343Z,1478848531.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:31.378Z,1478848531.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:31.742Z,1478848531.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:31.767Z,1478848531.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:32.153Z,1478848532.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:32.174Z,1478848532.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:32.543Z,1478848532.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:32.570Z,1478848532.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:32.943Z,1478848532.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:33.010Z,1478848533.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:33.342Z,1478848533.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:33.378Z,1478848533.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:33.741Z,1478848533.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:33.777Z,1478848533.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:34.143Z,1478848534.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:34.176Z,1478848534.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:34.550Z,1478848534.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:34.589Z,1478848534.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:34.941Z,1478848534.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:34.977Z,1478848534.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:35.341Z,1478848535.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:35.385Z,1478848535.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:35.743Z,1478848535.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:35.749Z,1478848535.749 [PNI_TCM](ERROR): CRC does not match. Expected:0x19696 got:0x16913
2016-11-11T07:15:35.803Z,1478848535.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:36.148Z,1478848536.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:36.171Z,1478848536.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:36.545Z,1478848536.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:36.565Z,1478848536.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:36.947Z,1478848536.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:36.956Z,1478848536.956 [BPC1](ERROR): Failed to receive battery data
2016-11-11T07:15:36.956Z,1478848536.956 [BPC1] Communications Fault, FailCount= 1
2016-11-11T07:15:36.956Z,1478848536.956 [BPC1](ERROR): Communications Fault
2016-11-11T07:15:37.001Z,1478848537.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:37.032Z,1478848537.033 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T07:15:37.347Z,1478848537.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:37.370Z,1478848537.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:37.751Z,1478848537.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:37.773Z,1478848537.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:38.142Z,1478848538.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:38.168Z,1478848538.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:38.187Z,1478848538.187 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:15:38.187Z,1478848538.187 [BPC1] No Fault, FailCount= 1
2016-11-11T07:15:38.542Z,1478848538.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:38.629Z,1478848538.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:38.956Z,1478848538.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:38.971Z,1478848538.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:39.342Z,1478848539.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:39.386Z,1478848539.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:39.741Z,1478848539.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:39.773Z,1478848539.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:40.147Z,1478848540.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:40.182Z,1478848540.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:40.551Z,1478848540.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:40.575Z,1478848540.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:40.949Z,1478848540.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:40.992Z,1478848540.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:41.348Z,1478848541.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:41.363Z,1478848541.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:41.748Z,1478848541.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:41.775Z,1478848541.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:42.150Z,1478848542.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:42.173Z,1478848542.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:42.552Z,1478848542.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:42.573Z,1478848542.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:42.941Z,1478848542.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:42.969Z,1478848542.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:43.347Z,1478848543.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:43.372Z,1478848543.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:43.746Z,1478848543.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:43.780Z,1478848543.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:46.994Z,1478848546.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:47.038Z,1478848547.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:47.140Z,1478848547.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:47.173Z,1478848547.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:47.525Z,1478848547.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:47.545Z,1478848547.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:47.924Z,1478848547.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:47.945Z,1478848547.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:48.322Z,1478848548.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:48.349Z,1478848548.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:48.724Z,1478848548.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:48.745Z,1478848548.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:49.117Z,1478848549.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:49.149Z,1478848549.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:49.528Z,1478848549.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:49.548Z,1478848549.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:49.917Z,1478848549.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:49.951Z,1478848549.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:50.317Z,1478848550.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:50.366Z,1478848550.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:50.410Z,1478848550.409 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T07:15:50.729Z,1478848550.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:50.749Z,1478848550.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:51.124Z,1478848551.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:51.178Z,1478848551.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:51.525Z,1478848551.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:51.583Z,1478848551.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:51.921Z,1478848551.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:51.943Z,1478848551.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:52.320Z,1478848552.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:52.345Z,1478848552.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:52.730Z,1478848552.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:52.745Z,1478848552.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:53.120Z,1478848553.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:53.152Z,1478848553.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:53.517Z,1478848553.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:53.549Z,1478848553.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:53.918Z,1478848553.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:53.954Z,1478848553.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:54.317Z,1478848554.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:54.349Z,1478848554.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:54.717Z,1478848554.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:54.753Z,1478848554.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:55.117Z,1478848555.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:55.134Z,1478848555.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:55.522Z,1478848555.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:55.538Z,1478848555.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:55.920Z,1478848555.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:55.941Z,1478848555.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:56.321Z,1478848556.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:56.336Z,1478848556.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:56.724Z,1478848556.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:56.740Z,1478848556.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:57.125Z,1478848557.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:57.140Z,1478848557.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:57.524Z,1478848557.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:57.538Z,1478848557.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:57.924Z,1478848557.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:57.939Z,1478848557.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:58.331Z,1478848558.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:58.346Z,1478848558.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:58.724Z,1478848558.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:58.741Z,1478848558.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:59.117Z,1478848559.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:59.149Z,1478848559.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:59.533Z,1478848559.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:59.548Z,1478848559.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:15:59.917Z,1478848559.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:15:59.950Z,1478848559.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:00.317Z,1478848560.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:00.370Z,1478848560.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:00.717Z,1478848560.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:00.753Z,1478848560.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:01.117Z,1478848561.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:01.152Z,1478848561.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:01.517Z,1478848561.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:01.553Z,1478848561.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:01.921Z,1478848561.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:01.967Z,1478848561.967 [BPC1](ERROR): Failed to parse message.
2016-11-11T07:16:01.967Z,1478848561.967 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T07:16:01.967Z,1478848561.967 [BPC1] Data Fault, FailCount= 1
2016-11-11T07:16:01.967Z,1478848561.967 [BPC1](ERROR): Data Fault
2016-11-11T07:16:01.997Z,1478848561.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:02.043Z,1478848562.043 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T07:16:02.317Z,1478848562.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:02.345Z,1478848562.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:02.724Z,1478848562.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:02.739Z,1478848562.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:03.123Z,1478848563.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:03.160Z,1478848563.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:03.180Z,1478848563.180 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:16:03.180Z,1478848563.180 [BPC1] No Fault, FailCount= 1
2016-11-11T07:16:03.520Z,1478848563.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:03.594Z,1478848563.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:03.923Z,1478848563.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:03.977Z,1478848563.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:04.325Z,1478848564.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:04.340Z,1478848564.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:04.720Z,1478848564.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:04.735Z,1478848564.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:05.123Z,1478848565.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:05.138Z,1478848565.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:05.524Z,1478848565.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:05.539Z,1478848565.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:05.923Z,1478848565.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:05.953Z,1478848565.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:06.317Z,1478848566.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:06.344Z,1478848566.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:06.745Z,1478848566.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:06.759Z,1478848566.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:07.124Z,1478848567.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:07.139Z,1478848567.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:07.524Z,1478848567.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:07.539Z,1478848567.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:07.924Z,1478848567.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:07.938Z,1478848567.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:08.324Z,1478848568.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:08.338Z,1478848568.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:08.724Z,1478848568.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:08.739Z,1478848568.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:09.128Z,1478848569.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:09.149Z,1478848569.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:09.525Z,1478848569.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:09.539Z,1478848569.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:09.925Z,1478848569.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:09.941Z,1478848569.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:10.324Z,1478848570.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:10.345Z,1478848570.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:10.724Z,1478848570.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:10.741Z,1478848570.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:11.117Z,1478848571.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:11.152Z,1478848571.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:11.528Z,1478848571.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:11.553Z,1478848571.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:11.917Z,1478848571.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:11.951Z,1478848571.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:12.317Z,1478848572.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:12.349Z,1478848572.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:12.728Z,1478848572.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:12.743Z,1478848572.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:13.117Z,1478848573.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:13.149Z,1478848573.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:13.517Z,1478848573.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:13.549Z,1478848573.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:13.925Z,1478848573.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:13.957Z,1478848573.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:14.316Z,1478848574.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:14.343Z,1478848574.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:14.717Z,1478848574.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:14.758Z,1478848574.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:15.117Z,1478848575.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:15.137Z,1478848575.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:15.517Z,1478848575.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:15.537Z,1478848575.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:15.917Z,1478848575.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:15.973Z,1478848575.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:16.321Z,1478848576.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:16.336Z,1478848576.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:16.717Z,1478848576.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:16.769Z,1478848576.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:17.117Z,1478848577.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:17.169Z,1478848577.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:17.521Z,1478848577.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:17.541Z,1478848577.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:17.917Z,1478848577.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:17.937Z,1478848577.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:18.322Z,1478848578.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:18.337Z,1478848578.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:18.721Z,1478848578.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:18.736Z,1478848578.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:19.123Z,1478848579.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:19.145Z,1478848579.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:19.525Z,1478848579.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:19.540Z,1478848579.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:19.928Z,1478848579.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:19.943Z,1478848579.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:20.325Z,1478848580.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:20.340Z,1478848580.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:20.725Z,1478848580.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:20.740Z,1478848580.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:21.117Z,1478848581.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:21.152Z,1478848581.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:21.524Z,1478848581.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:21.539Z,1478848581.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:21.917Z,1478848581.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:21.949Z,1478848581.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:22.324Z,1478848582.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:22.347Z,1478848582.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:22.717Z,1478848582.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:22.743Z,1478848582.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:23.117Z,1478848583.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:23.148Z,1478848583.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:23.517Z,1478848583.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:23.553Z,1478848583.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:23.923Z,1478848583.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:23.937Z,1478848583.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:24.317Z,1478848584.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:24.337Z,1478848584.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:24.725Z,1478848584.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:24.740Z,1478848584.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:25.124Z,1478848585.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:25.139Z,1478848585.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:25.523Z,1478848585.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:25.538Z,1478848585.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:25.928Z,1478848585.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:25.943Z,1478848585.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:26.324Z,1478848586.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:26.345Z,1478848586.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:26.725Z,1478848586.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:26.740Z,1478848586.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:27.132Z,1478848587.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:27.153Z,1478848587.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:27.528Z,1478848587.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:27.543Z,1478848587.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:27.928Z,1478848587.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:28.001Z,1478848588.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:28.329Z,1478848588.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:28.370Z,1478848588.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:28.725Z,1478848588.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:28.745Z,1478848588.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:29.124Z,1478848589.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:29.140Z,1478848589.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:29.525Z,1478848589.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:29.579Z,1478848589.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:29.923Z,1478848589.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:29.945Z,1478848589.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:30.325Z,1478848590.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:30.379Z,1478848590.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:30.732Z,1478848590.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:30.780Z,1478848590.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:31.124Z,1478848591.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:31.139Z,1478848591.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:31.520Z,1478848591.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:31.548Z,1478848591.548 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:31.548Z,1478848591.548 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2016-11-11T07:16:31.548Z,1478848591.548 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:16:31.554Z,1478848591.555 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:31.555Z,1478848591.555 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 30
2016-11-11T07:16:31.555Z,1478848591.555 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:16:31.578Z,1478848591.578 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:16:31.579Z,1478848591.579 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:16:31.917Z,1478848591.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:31.983Z,1478848591.983 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:16:31.983Z,1478848591.983 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2016-11-11T07:16:31.984Z,1478848591.984 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:16:31.984Z,1478848591.984 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 30
2016-11-11T07:16:32.317Z,1478848592.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:32.348Z,1478848592.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:16:32.349Z,1478848592.349 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:16:32.349Z,1478848592.349 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:16:32.354Z,1478848592.354 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:16:32.354Z,1478848592.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:16:32.354Z,1478848592.355 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:16:32.718Z,1478848592.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:32.741Z,1478848592.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:16:32.742Z,1478848592.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:33.117Z,1478848593.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:33.153Z,1478848593.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:16:33.154Z,1478848593.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:33.517Z,1478848593.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:33.536Z,1478848593.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:16:33.537Z,1478848593.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:33.923Z,1478848593.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:33.939Z,1478848593.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:16:33.940Z,1478848593.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:34.324Z,1478848594.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:34.339Z,1478848594.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:16:34.340Z,1478848594.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:34.347Z,1478848594.347 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:34.347Z,1478848594.347 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 30
2016-11-11T07:16:34.347Z,1478848594.348 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:16:34.378Z,1478848594.378 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:16:34.723Z,1478848594.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:34.751Z,1478848594.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:16:34.752Z,1478848594.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:34.786Z,1478848594.786 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:16:34.787Z,1478848594.787 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 30
2016-11-11T07:16:35.117Z,1478848595.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:35.149Z,1478848595.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:16:35.150Z,1478848595.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:35.164Z,1478848595.164 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:16:35.165Z,1478848595.165 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:16:35.165Z,1478848595.165 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:16:35.517Z,1478848595.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:35.550Z,1478848595.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:16:35.551Z,1478848595.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:35.917Z,1478848595.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:35.953Z,1478848595.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:16:35.954Z,1478848595.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:36.317Z,1478848596.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:36.340Z,1478848596.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:16:36.341Z,1478848596.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:36.717Z,1478848596.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:36.761Z,1478848596.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:16:36.762Z,1478848596.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:37.118Z,1478848597.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:37.160Z,1478848597.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:16:37.161Z,1478848597.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:37.521Z,1478848597.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:37.557Z,1478848597.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:16:37.558Z,1478848597.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:37.921Z,1478848597.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:37.957Z,1478848597.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:16:37.958Z,1478848597.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:38.317Z,1478848598.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:38.345Z,1478848598.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T07:16:38.345Z,1478848598.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:38.727Z,1478848598.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:38.742Z,1478848598.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T07:16:38.743Z,1478848598.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:39.124Z,1478848599.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:39.138Z,1478848599.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T07:16:39.139Z,1478848599.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:39.525Z,1478848599.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:39.544Z,1478848599.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T07:16:39.545Z,1478848599.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:39.917Z,1478848599.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:39.949Z,1478848599.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T07:16:39.950Z,1478848599.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:40.317Z,1478848600.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:40.350Z,1478848600.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T07:16:40.351Z,1478848600.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:40.717Z,1478848600.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:40.748Z,1478848600.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T07:16:40.749Z,1478848600.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:41.121Z,1478848601.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:41.153Z,1478848601.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T07:16:41.154Z,1478848601.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:41.517Z,1478848601.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:41.596Z,1478848601.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2016-11-11T07:16:41.597Z,1478848601.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:41.917Z,1478848601.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:41.953Z,1478848601.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T07:16:41.954Z,1478848601.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:42.317Z,1478848602.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:42.369Z,1478848602.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T07:16:42.370Z,1478848602.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:42.717Z,1478848602.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:42.744Z,1478848602.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T07:16:42.746Z,1478848602.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:42.766Z,1478848602.766 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T07:16:42.766Z,1478848602.766 [Default:CheckIn:C.Wait] Stopped
2016-11-11T07:16:42.766Z,1478848602.766 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T07:16:42.766Z,1478848602.766 [Default:CheckIn:D] Running Loop=1
2016-11-11T07:16:43.123Z,1478848603.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:43.175Z,1478848603.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T07:16:43.176Z,1478848603.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:43.185Z,1478848603.185 [Default:CheckIn:D] Stopped
2016-11-11T07:16:43.185Z,1478848603.185 [Default:CheckIn:E] Running Loop=1
2016-11-11T07:16:43.524Z,1478848603.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:43.539Z,1478848603.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T07:16:43.540Z,1478848603.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:43.549Z,1478848603.549 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 146.697900 min 
2016-11-11T07:16:43.550Z,1478848603.550 [Default:CheckIn:E] Stopped
2016-11-11T07:16:43.550Z,1478848603.550 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T07:16:43.550Z,1478848603.550 [Default:CheckIn] Stopped
2016-11-11T07:16:43.550Z,1478848603.550 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T07:16:43.550Z,1478848603.550 [Default:CheckIn](INFO): Running loop #15
2016-11-11T07:16:43.550Z,1478848603.550 [Default:CheckIn] Running Loop=15
2016-11-11T07:16:43.550Z,1478848603.550 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T07:16:43.550Z,1478848603.550 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T07:16:43.924Z,1478848603.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:43.974Z,1478848603.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T07:16:43.975Z,1478848603.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:47.246Z,1478848607.246 [NAL9602](INFO): Powering up
2016-11-11T07:16:47.277Z,1478848607.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:47.296Z,1478848607.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2016-11-11T07:16:47.297Z,1478848607.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:47.400Z,1478848607.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:47.435Z,1478848607.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2016-11-11T07:16:47.436Z,1478848607.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:47.784Z,1478848607.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:47.817Z,1478848607.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2016-11-11T07:16:47.818Z,1478848607.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:48.184Z,1478848608.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:48.199Z,1478848608.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2016-11-11T07:16:48.200Z,1478848608.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:48.585Z,1478848608.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:48.600Z,1478848608.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2016-11-11T07:16:48.601Z,1478848608.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:48.984Z,1478848608.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:49.007Z,1478848609.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2016-11-11T07:16:49.008Z,1478848609.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:49.385Z,1478848609.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:49.404Z,1478848609.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2016-11-11T07:16:49.405Z,1478848609.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:49.777Z,1478848609.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:49.808Z,1478848609.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2016-11-11T07:16:49.809Z,1478848609.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:50.176Z,1478848610.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:50.209Z,1478848610.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2016-11-11T07:16:50.210Z,1478848610.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:50.577Z,1478848610.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:50.610Z,1478848610.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2016-11-11T07:16:50.611Z,1478848610.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:50.977Z,1478848610.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:51.009Z,1478848611.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2016-11-11T07:16:51.010Z,1478848611.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:51.377Z,1478848611.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:51.409Z,1478848611.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2016-11-11T07:16:51.410Z,1478848611.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:51.777Z,1478848611.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:51.816Z,1478848611.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:52.177Z,1478848612.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:52.209Z,1478848612.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:52.585Z,1478848612.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:52.621Z,1478848612.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:52.977Z,1478848612.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:53.013Z,1478848613.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:53.381Z,1478848613.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:53.397Z,1478848613.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:53.781Z,1478848613.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:53.805Z,1478848613.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:54.183Z,1478848614.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:54.205Z,1478848614.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:54.585Z,1478848614.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:54.601Z,1478848614.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:54.989Z,1478848614.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:55.049Z,1478848615.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:55.388Z,1478848615.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:55.409Z,1478848615.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:55.777Z,1478848615.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:55.830Z,1478848615.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:56.177Z,1478848616.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:56.210Z,1478848616.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:56.577Z,1478848616.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:56.629Z,1478848616.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:56.978Z,1478848616.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:57.005Z,1478848617.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:57.378Z,1478848617.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:57.425Z,1478848617.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:57.788Z,1478848617.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:57.838Z,1478848617.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:58.161Z,1478848618.161 [NAL9602](INFO): NAL9602 initialized
2016-11-11T07:16:58.179Z,1478848618.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:58.194Z,1478848618.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:58.577Z,1478848618.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:58.597Z,1478848618.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:58.992Z,1478848618.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:59.023Z,1478848619.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:59.401Z,1478848619.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:59.433Z,1478848619.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:16:59.789Z,1478848619.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:16:59.809Z,1478848619.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:00.185Z,1478848620.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:00.201Z,1478848620.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:00.584Z,1478848620.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:00.606Z,1478848620.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:00.984Z,1478848620.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:01.006Z,1478848621.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:01.377Z,1478848621.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:01.413Z,1478848621.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:01.777Z,1478848621.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:01.809Z,1478848621.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:02.177Z,1478848622.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:02.211Z,1478848622.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:02.577Z,1478848622.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:02.612Z,1478848622.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:02.977Z,1478848622.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:03.009Z,1478848623.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:03.377Z,1478848623.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:03.410Z,1478848623.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:03.777Z,1478848623.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:03.812Z,1478848623.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:04.177Z,1478848624.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:04.209Z,1478848624.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:04.589Z,1478848624.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:04.609Z,1478848624.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:04.982Z,1478848624.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:05.008Z,1478848625.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:05.377Z,1478848625.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:05.409Z,1478848625.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:05.778Z,1478848625.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:05.834Z,1478848625.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:06.178Z,1478848626.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:06.217Z,1478848626.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:06.581Z,1478848626.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:06.605Z,1478848626.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:06.980Z,1478848626.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:07.013Z,1478848627.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:07.385Z,1478848627.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:07.405Z,1478848627.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:07.777Z,1478848627.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:07.809Z,1478848627.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:08.177Z,1478848628.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:08.209Z,1478848628.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:08.577Z,1478848628.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:08.636Z,1478848628.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:08.977Z,1478848628.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:09.013Z,1478848629.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:09.381Z,1478848629.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:09.413Z,1478848629.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:09.777Z,1478848629.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:09.837Z,1478848629.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:10.177Z,1478848630.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:10.197Z,1478848630.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:10.580Z,1478848630.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:10.631Z,1478848630.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:10.981Z,1478848630.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:10.996Z,1478848630.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:11.381Z,1478848631.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:11.433Z,1478848631.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:11.784Z,1478848631.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:11.832Z,1478848631.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:12.186Z,1478848632.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:12.201Z,1478848632.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:12.577Z,1478848632.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:12.597Z,1478848632.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:12.978Z,1478848632.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:12.992Z,1478848632.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:13.385Z,1478848633.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:13.400Z,1478848633.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:13.780Z,1478848633.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:13.806Z,1478848633.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:14.184Z,1478848634.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:14.205Z,1478848634.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:14.586Z,1478848634.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:14.605Z,1478848634.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:14.980Z,1478848634.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:15.009Z,1478848635.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:15.377Z,1478848635.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:15.413Z,1478848635.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:15.777Z,1478848635.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:15.809Z,1478848635.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:16.177Z,1478848636.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:16.209Z,1478848636.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:16.585Z,1478848636.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:16.617Z,1478848636.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:16.982Z,1478848636.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:17.007Z,1478848637.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:17.377Z,1478848637.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:17.405Z,1478848637.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:17.777Z,1478848637.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:17.820Z,1478848637.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:18.182Z,1478848638.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:18.217Z,1478848638.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:18.578Z,1478848638.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:18.613Z,1478848638.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:18.984Z,1478848638.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:19.016Z,1478848639.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:19.381Z,1478848639.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:19.424Z,1478848639.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:19.781Z,1478848639.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:19.809Z,1478848639.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:20.189Z,1478848640.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:20.204Z,1478848640.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:20.586Z,1478848640.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:20.609Z,1478848640.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:20.977Z,1478848640.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:21.009Z,1478848641.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:21.377Z,1478848641.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:21.413Z,1478848641.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:21.782Z,1478848641.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:21.813Z,1478848641.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:22.177Z,1478848642.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:22.229Z,1478848642.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:22.583Z,1478848642.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:22.597Z,1478848642.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:22.982Z,1478848642.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:22.997Z,1478848642.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:23.385Z,1478848643.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:23.437Z,1478848643.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:23.785Z,1478848643.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:23.799Z,1478848643.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:24.182Z,1478848644.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:24.206Z,1478848644.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:24.580Z,1478848644.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:24.629Z,1478848644.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:24.984Z,1478848644.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:24.999Z,1478848644.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:25.380Z,1478848645.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:25.438Z,1478848645.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:25.781Z,1478848645.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:25.837Z,1478848645.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:26.177Z,1478848646.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:26.211Z,1478848646.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:26.588Z,1478848646.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:26.609Z,1478848646.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:26.977Z,1478848646.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:27.009Z,1478848647.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:27.389Z,1478848647.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:27.404Z,1478848647.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:27.798Z,1478848647.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:27.814Z,1478848647.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:28.177Z,1478848648.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:28.209Z,1478848648.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:28.577Z,1478848648.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:28.610Z,1478848648.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:28.978Z,1478848648.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:29.013Z,1478848649.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:29.377Z,1478848649.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:29.405Z,1478848649.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:29.777Z,1478848649.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:29.797Z,1478848649.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:30.164Z,1478848650.164 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-11T07:17:30.239Z,1478848650.239 [NAL9602](FAULT): received: 
+CSQ:0

OK0, 2, 0, 0, 0

OK
2016-11-11T07:17:30.239Z,1478848650.239 [NAL9602] Data Fault, FailCount= 5
2016-11-11T07:17:30.239Z,1478848650.239 [NAL9602](ERROR): Data Fault
2016-11-11T07:17:30.260Z,1478848650.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:30.303Z,1478848650.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:30.347Z,1478848650.347 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T07:17:30.347Z,1478848650.347 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-11-11T07:17:30.561Z,1478848650.560 [NAL9602](INFO): Powering down
2016-11-11T07:17:30.586Z,1478848650.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:30.614Z,1478848650.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:30.984Z,1478848650.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:31.005Z,1478848651.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:31.392Z,1478848651.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:31.408Z,1478848651.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:31.791Z,1478848651.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:31.823Z,1478848651.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:32.176Z,1478848652.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:32.209Z,1478848652.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:32.592Z,1478848652.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:32.607Z,1478848652.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:32.981Z,1478848652.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:33.006Z,1478848653.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:33.377Z,1478848653.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:33.410Z,1478848653.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:33.781Z,1478848653.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:33.813Z,1478848653.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:34.181Z,1478848654.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:34.213Z,1478848654.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:34.581Z,1478848654.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:34.606Z,1478848654.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:34.981Z,1478848654.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:35.013Z,1478848655.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:35.377Z,1478848655.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:35.413Z,1478848655.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:35.777Z,1478848655.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:35.813Z,1478848655.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:36.182Z,1478848656.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:36.241Z,1478848656.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:36.577Z,1478848656.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:36.592Z,1478848656.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:36.982Z,1478848656.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:36.996Z,1478848656.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:37.385Z,1478848657.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:37.400Z,1478848657.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:37.784Z,1478848657.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:37.845Z,1478848657.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:38.183Z,1478848658.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:38.199Z,1478848658.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:38.583Z,1478848658.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:38.640Z,1478848658.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:38.983Z,1478848658.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:38.999Z,1478848658.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:39.384Z,1478848659.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:39.439Z,1478848659.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:39.783Z,1478848659.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:39.840Z,1478848659.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:40.184Z,1478848660.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:40.200Z,1478848660.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:40.584Z,1478848660.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:40.599Z,1478848660.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:40.984Z,1478848660.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:41.004Z,1478848661.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:41.384Z,1478848661.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:41.400Z,1478848661.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:41.776Z,1478848661.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:41.809Z,1478848661.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:42.176Z,1478848662.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:42.209Z,1478848662.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:42.577Z,1478848662.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:42.608Z,1478848662.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:42.976Z,1478848662.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:43.009Z,1478848663.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:43.377Z,1478848663.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:43.409Z,1478848663.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:43.777Z,1478848663.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:43.813Z,1478848663.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:44.176Z,1478848664.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:44.210Z,1478848664.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:47.509Z,1478848667.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:47.526Z,1478848667.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:47.637Z,1478848667.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:47.677Z,1478848667.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:48.008Z,1478848668.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:48.041Z,1478848668.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:48.409Z,1478848668.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:48.442Z,1478848668.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:48.812Z,1478848668.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:48.875Z,1478848668.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:49.204Z,1478848669.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:49.241Z,1478848669.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:49.605Z,1478848669.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:49.634Z,1478848669.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:50.004Z,1478848670.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:50.045Z,1478848670.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:50.404Z,1478848670.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:50.457Z,1478848670.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:50.812Z,1478848670.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:50.844Z,1478848670.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:51.212Z,1478848671.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:51.230Z,1478848671.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:51.615Z,1478848671.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:51.632Z,1478848671.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:52.012Z,1478848672.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:52.073Z,1478848672.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:52.405Z,1478848672.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:52.438Z,1478848672.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:52.804Z,1478848672.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:52.837Z,1478848672.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:53.205Z,1478848673.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:53.257Z,1478848673.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:53.604Z,1478848673.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:53.622Z,1478848673.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:54.005Z,1478848674.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:54.046Z,1478848674.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:54.413Z,1478848674.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:54.469Z,1478848674.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:54.813Z,1478848674.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:54.853Z,1478848674.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:55.213Z,1478848675.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:55.254Z,1478848675.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:55.612Z,1478848675.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:55.630Z,1478848675.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:56.011Z,1478848676.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:56.032Z,1478848676.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:56.413Z,1478848676.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:56.431Z,1478848676.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:56.812Z,1478848676.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:56.844Z,1478848676.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:57.205Z,1478848677.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:57.234Z,1478848677.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:57.608Z,1478848677.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:57.637Z,1478848677.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:58.005Z,1478848678.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:58.029Z,1478848678.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:58.405Z,1478848678.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:58.441Z,1478848678.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:58.805Z,1478848678.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:58.827Z,1478848678.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:59.205Z,1478848679.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:59.222Z,1478848679.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:17:59.604Z,1478848679.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:17:59.651Z,1478848679.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:00.008Z,1478848680.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:00.071Z,1478848680.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:00.405Z,1478848680.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:00.426Z,1478848680.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:00.807Z,1478848680.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:00.889Z,1478848680.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:00.939Z,1478848680.939 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T07:18:00.939Z,1478848680.939 [Rowe_600LCM] No Fault, FailCount= 5
2016-11-11T07:18:01.007Z,1478848681.007 [Rowe_600LCM](INFO): Initializing
2016-11-11T07:18:01.008Z,1478848681.008 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T07:18:01.008Z,1478848681.008 [Rowe_600LCM](INFO): LCM OK
2016-11-11T07:18:01.008Z,1478848681.008 [Rowe_600LCM](INFO): Powering up
2016-11-11T07:18:01.206Z,1478848681.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:01.249Z,1478848681.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:01.606Z,1478848681.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:01.644Z,1478848681.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:02.007Z,1478848682.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:02.066Z,1478848682.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:02.407Z,1478848682.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:02.463Z,1478848682.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:02.825Z,1478848682.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:02.866Z,1478848682.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:03.214Z,1478848683.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:03.265Z,1478848683.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:03.606Z,1478848683.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:03.681Z,1478848683.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:04.007Z,1478848684.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:04.092Z,1478848684.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:04.413Z,1478848684.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:04.434Z,1478848684.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:04.806Z,1478848684.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:04.909Z,1478848684.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:05.207Z,1478848685.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:05.288Z,1478848685.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:05.359Z,1478848685.359 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T07:18:05.523Z,1478848685.523 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T07:18:05.524Z,1478848685.524 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T07:18:05.525Z,1478848685.525 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T07:18:05.526Z,1478848685.526 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T07:18:05.607Z,1478848685.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:05.675Z,1478848685.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:06.006Z,1478848686.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:06.065Z,1478848686.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:06.407Z,1478848686.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:06.446Z,1478848686.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:06.806Z,1478848686.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:06.895Z,1478848686.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:07.213Z,1478848687.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:07.246Z,1478848687.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:07.607Z,1478848687.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:07.662Z,1478848687.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:08.007Z,1478848688.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:08.031Z,1478848688.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:08.406Z,1478848688.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:08.453Z,1478848688.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:08.810Z,1478848688.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:08.856Z,1478848688.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:09.209Z,1478848689.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:09.226Z,1478848689.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:09.622Z,1478848689.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:09.659Z,1478848689.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:10.011Z,1478848690.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:10.028Z,1478848690.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:10.411Z,1478848690.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:10.429Z,1478848690.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:10.811Z,1478848690.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:10.833Z,1478848690.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:11.208Z,1478848691.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:11.234Z,1478848691.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:11.604Z,1478848691.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:11.661Z,1478848691.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:12.004Z,1478848692.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:12.046Z,1478848692.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:12.409Z,1478848692.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:12.427Z,1478848692.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:12.832Z,1478848692.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:12.925Z,1478848692.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:13.205Z,1478848693.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:13.223Z,1478848693.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:13.609Z,1478848693.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:13.627Z,1478848693.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:14.010Z,1478848694.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:14.038Z,1478848694.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:14.408Z,1478848694.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:14.460Z,1478848694.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:14.806Z,1478848694.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:14.851Z,1478848694.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:15.206Z,1478848695.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:15.226Z,1478848695.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:15.612Z,1478848695.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:15.641Z,1478848695.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:16.007Z,1478848696.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:16.054Z,1478848696.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:16.407Z,1478848696.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:16.450Z,1478848696.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:16.810Z,1478848696.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:16.878Z,1478848696.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:17.213Z,1478848697.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:17.273Z,1478848697.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:17.614Z,1478848697.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:17.661Z,1478848697.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:18.007Z,1478848698.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:18.062Z,1478848698.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:18.412Z,1478848698.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:18.437Z,1478848698.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:18.814Z,1478848698.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:18.842Z,1478848698.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:19.206Z,1478848699.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:19.249Z,1478848699.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:19.607Z,1478848699.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:19.653Z,1478848699.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:20.014Z,1478848700.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:20.034Z,1478848700.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:20.412Z,1478848700.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:20.488Z,1478848700.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:20.806Z,1478848700.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:20.839Z,1478848700.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:21.207Z,1478848701.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:21.270Z,1478848701.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:21.612Z,1478848701.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:21.659Z,1478848701.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:22.007Z,1478848702.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:22.040Z,1478848702.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:22.423Z,1478848702.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:22.486Z,1478848702.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:22.806Z,1478848702.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:22.845Z,1478848702.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:23.212Z,1478848703.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:23.256Z,1478848703.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:23.607Z,1478848703.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:23.659Z,1478848703.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:24.016Z,1478848704.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:24.037Z,1478848704.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:24.411Z,1478848704.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:24.426Z,1478848704.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:24.807Z,1478848704.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:24.840Z,1478848704.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:25.215Z,1478848705.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:25.230Z,1478848705.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:25.612Z,1478848705.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:25.633Z,1478848705.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:26.020Z,1478848706.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:26.035Z,1478848706.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:26.405Z,1478848706.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:26.437Z,1478848706.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:26.804Z,1478848706.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:26.837Z,1478848706.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:27.092Z,1478848707.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:27.205Z,1478848707.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:27.231Z,1478848707.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:27.604Z,1478848707.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:27.637Z,1478848707.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:27.888Z,1478848707.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:28.004Z,1478848708.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:28.028Z,1478848708.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:28.405Z,1478848708.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:28.420Z,1478848708.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:28.804Z,1478848708.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:28.840Z,1478848708.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:29.208Z,1478848709.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:29.223Z,1478848709.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:29.609Z,1478848709.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:29.624Z,1478848709.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:30.008Z,1478848710.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:30.023Z,1478848710.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:30.404Z,1478848710.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:30.419Z,1478848710.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:30.805Z,1478848710.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:30.825Z,1478848710.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:31.209Z,1478848711.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:31.225Z,1478848711.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:31.604Z,1478848711.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:31.625Z,1478848711.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:32.009Z,1478848712.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:32.024Z,1478848712.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:32.405Z,1478848712.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:32.421Z,1478848712.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:32.808Z,1478848712.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:32.823Z,1478848712.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:33.209Z,1478848713.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:33.225Z,1478848713.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:33.604Z,1478848713.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:33.625Z,1478848713.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:34.009Z,1478848714.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:34.024Z,1478848714.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:34.405Z,1478848714.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:34.420Z,1478848714.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:34.808Z,1478848714.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:34.823Z,1478848714.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:35.205Z,1478848715.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:35.220Z,1478848715.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:35.605Z,1478848715.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:35.665Z,1478848715.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:36.009Z,1478848716.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:36.029Z,1478848716.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:36.409Z,1478848716.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:36.449Z,1478848716.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:36.805Z,1478848716.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:36.825Z,1478848716.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:37.205Z,1478848717.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:37.253Z,1478848717.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:37.609Z,1478848717.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:37.650Z,1478848717.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:38.008Z,1478848718.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:38.025Z,1478848718.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:38.405Z,1478848718.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:38.451Z,1478848718.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:38.808Z,1478848718.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:38.824Z,1478848718.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:39.208Z,1478848719.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:39.225Z,1478848719.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:39.604Z,1478848719.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:39.625Z,1478848719.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:40.008Z,1478848720.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:40.023Z,1478848720.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:40.405Z,1478848720.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:40.420Z,1478848720.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:40.809Z,1478848720.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:40.824Z,1478848720.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:41.204Z,1478848721.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:41.219Z,1478848721.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:41.601Z,1478848721.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:41.617Z,1478848721.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:42.004Z,1478848722.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:42.019Z,1478848722.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:42.408Z,1478848722.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:42.423Z,1478848722.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:42.820Z,1478848722.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:42.835Z,1478848722.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:43.208Z,1478848723.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:43.223Z,1478848723.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:43.617Z,1478848723.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:43.680Z,1478848723.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:44.009Z,1478848724.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:44.024Z,1478848724.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:44.409Z,1478848724.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:44.424Z,1478848724.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:47.632Z,1478848727.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:47.648Z,1478848727.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:47.745Z,1478848727.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:47.780Z,1478848727.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:48.101Z,1478848728.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:48.117Z,1478848728.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:48.501Z,1478848728.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:48.522Z,1478848728.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:48.898Z,1478848728.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:48.914Z,1478848728.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:49.301Z,1478848729.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:49.321Z,1478848729.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:49.701Z,1478848729.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:49.763Z,1478848729.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:50.101Z,1478848730.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:50.121Z,1478848730.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:50.501Z,1478848730.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:50.549Z,1478848730.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:50.900Z,1478848730.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:50.915Z,1478848730.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:51.293Z,1478848731.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:51.341Z,1478848731.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:51.698Z,1478848731.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:51.750Z,1478848731.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:52.101Z,1478848732.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:52.115Z,1478848732.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:52.498Z,1478848732.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:52.522Z,1478848732.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:52.899Z,1478848732.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:52.922Z,1478848732.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:53.297Z,1478848733.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:53.354Z,1478848733.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:53.697Z,1478848733.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:53.738Z,1478848733.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:54.097Z,1478848734.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:54.121Z,1478848734.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:54.497Z,1478848734.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:54.525Z,1478848734.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:54.897Z,1478848734.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:54.921Z,1478848734.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:55.302Z,1478848735.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:55.325Z,1478848735.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:55.702Z,1478848735.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:55.729Z,1478848735.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:56.106Z,1478848736.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:56.121Z,1478848736.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:56.497Z,1478848736.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:56.526Z,1478848736.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:56.894Z,1478848736.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:56.918Z,1478848736.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:57.297Z,1478848737.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:57.331Z,1478848737.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:57.697Z,1478848737.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:57.725Z,1478848737.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:58.098Z,1478848738.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:58.125Z,1478848738.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:58.508Z,1478848738.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:58.524Z,1478848738.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:58.899Z,1478848738.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:58.918Z,1478848738.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:59.303Z,1478848739.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:59.318Z,1478848739.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:18:59.711Z,1478848739.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:18:59.753Z,1478848739.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:00.097Z,1478848740.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:00.121Z,1478848740.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:00.496Z,1478848740.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:00.525Z,1478848740.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:00.896Z,1478848740.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:00.929Z,1478848740.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:01.297Z,1478848741.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:01.333Z,1478848741.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:01.726Z,1478848741.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:01.750Z,1478848741.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:02.100Z,1478848742.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:02.141Z,1478848742.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:02.504Z,1478848742.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:02.540Z,1478848742.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:02.904Z,1478848742.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:02.919Z,1478848742.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:03.300Z,1478848743.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:03.321Z,1478848743.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:03.708Z,1478848743.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:03.793Z,1478848743.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:04.096Z,1478848744.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:04.153Z,1478848744.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:04.497Z,1478848744.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:04.521Z,1478848744.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:04.904Z,1478848744.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:04.919Z,1478848744.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:05.300Z,1478848745.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:05.358Z,1478848745.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:05.725Z,1478848745.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:05.762Z,1478848745.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:06.112Z,1478848746.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:06.163Z,1478848746.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:06.496Z,1478848746.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:06.542Z,1478848746.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:06.896Z,1478848746.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:06.929Z,1478848746.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:07.301Z,1478848747.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:07.333Z,1478848747.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:07.697Z,1478848747.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:07.773Z,1478848747.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:08.097Z,1478848748.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:08.133Z,1478848748.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:08.497Z,1478848748.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:08.529Z,1478848748.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:08.896Z,1478848748.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:08.930Z,1478848748.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:09.296Z,1478848749.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:09.320Z,1478848749.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:09.705Z,1478848749.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:09.741Z,1478848749.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:10.110Z,1478848750.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:10.145Z,1478848750.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:10.505Z,1478848750.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:10.520Z,1478848750.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:10.904Z,1478848750.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:10.932Z,1478848750.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:11.297Z,1478848751.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:11.312Z,1478848751.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:11.697Z,1478848751.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:11.717Z,1478848751.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:12.104Z,1478848752.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:12.136Z,1478848752.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:12.503Z,1478848752.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:12.522Z,1478848752.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:12.903Z,1478848752.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:12.918Z,1478848752.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:13.312Z,1478848753.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:13.340Z,1478848753.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:13.711Z,1478848753.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:13.744Z,1478848753.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:14.097Z,1478848754.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:14.133Z,1478848754.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:14.501Z,1478848754.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:14.527Z,1478848754.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:14.896Z,1478848754.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:14.929Z,1478848754.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:15.301Z,1478848755.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:15.333Z,1478848755.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:15.707Z,1478848755.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:15.747Z,1478848755.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:16.101Z,1478848756.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:16.142Z,1478848756.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:16.498Z,1478848756.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:16.525Z,1478848756.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:16.897Z,1478848756.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:16.917Z,1478848756.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:17.306Z,1478848757.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:17.338Z,1478848757.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:17.712Z,1478848757.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:17.736Z,1478848757.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:18.101Z,1478848758.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:18.161Z,1478848758.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:18.497Z,1478848758.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:18.553Z,1478848758.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:18.896Z,1478848758.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:18.938Z,1478848758.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:19.305Z,1478848759.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:19.357Z,1478848759.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:19.719Z,1478848759.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:19.747Z,1478848759.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:20.102Z,1478848760.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:20.153Z,1478848760.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:20.506Z,1478848760.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:20.558Z,1478848760.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:20.903Z,1478848760.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:20.918Z,1478848760.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:21.307Z,1478848761.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:21.323Z,1478848761.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:21.737Z,1478848761.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:21.788Z,1478848761.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:22.104Z,1478848762.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:22.141Z,1478848762.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:22.498Z,1478848762.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:22.539Z,1478848762.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:22.897Z,1478848762.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:22.921Z,1478848762.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:23.312Z,1478848763.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:23.350Z,1478848763.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:23.704Z,1478848763.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:23.720Z,1478848763.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:24.113Z,1478848764.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:24.151Z,1478848764.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:24.497Z,1478848764.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:24.524Z,1478848764.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:24.896Z,1478848764.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:24.929Z,1478848764.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:25.300Z,1478848765.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:25.332Z,1478848765.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:25.696Z,1478848765.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:25.741Z,1478848765.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:26.101Z,1478848766.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:26.132Z,1478848766.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:26.498Z,1478848766.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:26.530Z,1478848766.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:26.903Z,1478848766.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:26.925Z,1478848766.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:27.306Z,1478848767.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:27.321Z,1478848767.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:27.707Z,1478848767.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:27.732Z,1478848767.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:28.104Z,1478848768.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:28.141Z,1478848768.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:28.497Z,1478848768.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:28.530Z,1478848768.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:28.896Z,1478848768.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:28.929Z,1478848768.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:29.304Z,1478848769.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:29.331Z,1478848769.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:29.699Z,1478848769.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:29.739Z,1478848769.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:30.101Z,1478848770.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:30.141Z,1478848770.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:30.501Z,1478848770.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:30.516Z,1478848770.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:30.565Z,1478848770.565 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T07:19:30.565Z,1478848770.565 [NAL9602] No Fault, FailCount= 5
2016-11-11T07:19:30.888Z,1478848770.888 [NAL9602](INFO): Powering up NAL9602
2016-11-11T07:19:30.905Z,1478848770.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:30.925Z,1478848770.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:31.308Z,1478848771.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:31.324Z,1478848771.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:31.708Z,1478848771.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:31.737Z,1478848771.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:32.100Z,1478848772.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:32.133Z,1478848772.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:32.504Z,1478848772.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:32.579Z,1478848772.579 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:32.579Z,1478848772.579 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2016-11-11T07:19:32.579Z,1478848772.579 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:19:32.593Z,1478848772.593 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:32.594Z,1478848772.594 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 31
2016-11-11T07:19:32.594Z,1478848772.594 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:19:32.621Z,1478848772.621 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:19:32.621Z,1478848772.621 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:19:32.898Z,1478848772.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:32.970Z,1478848772.970 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:19:32.970Z,1478848772.970 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2016-11-11T07:19:32.971Z,1478848772.971 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:19:32.971Z,1478848772.971 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 31
2016-11-11T07:19:33.297Z,1478848773.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:33.344Z,1478848773.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:19:33.345Z,1478848773.345 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:19:33.345Z,1478848773.345 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:19:33.350Z,1478848773.349 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:19:33.350Z,1478848773.350 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:19:33.350Z,1478848773.350 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:19:33.706Z,1478848773.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:33.747Z,1478848773.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:34.097Z,1478848774.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:34.156Z,1478848774.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:34.497Z,1478848774.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:34.553Z,1478848774.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:34.898Z,1478848774.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:34.925Z,1478848774.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:35.304Z,1478848775.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:35.325Z,1478848775.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:35.332Z,1478848775.332 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:35.332Z,1478848775.332 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 31
2016-11-11T07:19:35.332Z,1478848775.332 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:19:35.371Z,1478848775.371 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:19:35.722Z,1478848775.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:35.774Z,1478848775.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:35.834Z,1478848775.834 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:19:35.834Z,1478848775.834 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 31
2016-11-11T07:19:36.097Z,1478848776.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:36.131Z,1478848776.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:36.140Z,1478848776.140 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:19:36.141Z,1478848776.141 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:19:36.141Z,1478848776.141 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:19:36.497Z,1478848776.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:36.530Z,1478848776.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:36.897Z,1478848776.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:36.929Z,1478848776.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:37.297Z,1478848777.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:37.331Z,1478848777.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:37.697Z,1478848777.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:37.732Z,1478848777.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:38.097Z,1478848778.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:38.122Z,1478848778.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:38.505Z,1478848778.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:38.537Z,1478848778.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:38.897Z,1478848778.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:38.938Z,1478848778.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:39.297Z,1478848779.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:39.312Z,1478848779.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:39.697Z,1478848779.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:39.717Z,1478848779.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:40.107Z,1478848780.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:40.123Z,1478848780.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:40.504Z,1478848780.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:40.519Z,1478848780.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:40.904Z,1478848780.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:40.919Z,1478848780.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:41.300Z,1478848781.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:41.333Z,1478848781.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:41.708Z,1478848781.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:41.737Z,1478848781.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:42.081Z,1478848782.081 [NAL9602](INFO): NAL9602 initialized
2016-11-11T07:19:42.102Z,1478848782.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:42.118Z,1478848782.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:42.509Z,1478848782.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:42.526Z,1478848782.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:42.884Z,1478848782.884 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T07:19:42.884Z,1478848782.884 [NAL9602] Data Fault, FailCount= 1
2016-11-11T07:19:42.884Z,1478848782.884 [NAL9602](ERROR): Data Fault
2016-11-11T07:19:42.901Z,1478848782.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:42.921Z,1478848782.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:42.987Z,1478848782.987 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T07:19:43.285Z,1478848783.284 [NAL9602](INFO): Powering down
2016-11-11T07:19:43.308Z,1478848783.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:43.337Z,1478848783.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:43.696Z,1478848783.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:43.743Z,1478848783.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:44.101Z,1478848784.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:44.134Z,1478848784.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:44.175Z,1478848784.175 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T07:19:44.183Z,1478848784.183 [NAL9602] No Fault, FailCount= 1
2016-11-11T07:19:44.502Z,1478848784.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:44.527Z,1478848784.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:47.934Z,1478848787.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:48.005Z,1478848788.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:48.096Z,1478848788.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:48.129Z,1478848788.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:48.481Z,1478848788.481 [NAL9602](INFO): Powering up NAL9602
2016-11-11T07:19:48.498Z,1478848788.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:48.513Z,1478848788.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:48.896Z,1478848788.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:48.911Z,1478848788.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:49.296Z,1478848789.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:49.311Z,1478848789.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:49.699Z,1478848789.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:49.725Z,1478848789.725 [BPC1](ERROR): Failed to receive battery data
2016-11-11T07:19:49.725Z,1478848789.725 [BPC1] Communications Fault, FailCount= 1
2016-11-11T07:19:49.725Z,1478848789.725 [BPC1](ERROR): Communications Fault
2016-11-11T07:19:49.744Z,1478848789.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:49.835Z,1478848789.835 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T07:19:50.101Z,1478848790.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:50.127Z,1478848790.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:50.495Z,1478848790.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:50.512Z,1478848790.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:50.896Z,1478848790.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:50.912Z,1478848790.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:50.970Z,1478848790.970 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:19:50.970Z,1478848790.970 [BPC1] No Fault, FailCount= 1
2016-11-11T07:19:51.296Z,1478848791.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:51.358Z,1478848791.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:51.695Z,1478848791.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:51.749Z,1478848791.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:52.101Z,1478848792.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:52.120Z,1478848792.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:52.496Z,1478848792.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:52.511Z,1478848792.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:52.896Z,1478848792.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:52.911Z,1478848792.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:53.296Z,1478848793.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:53.322Z,1478848793.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:53.689Z,1478848793.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:53.718Z,1478848793.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:54.104Z,1478848794.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:54.119Z,1478848794.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:54.493Z,1478848794.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:54.518Z,1478848794.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:54.889Z,1478848794.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:54.928Z,1478848794.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:55.290Z,1478848795.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:55.326Z,1478848795.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:55.708Z,1478848795.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:55.723Z,1478848795.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:56.100Z,1478848796.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:56.126Z,1478848796.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:56.489Z,1478848796.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:56.527Z,1478848796.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:56.893Z,1478848796.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:56.932Z,1478848796.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:57.289Z,1478848797.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:57.325Z,1478848797.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:57.689Z,1478848797.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:57.716Z,1478848797.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:58.090Z,1478848798.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:58.124Z,1478848798.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:58.489Z,1478848798.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:58.519Z,1478848798.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:58.889Z,1478848798.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:58.913Z,1478848798.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:59.307Z,1478848799.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:59.326Z,1478848799.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:19:59.673Z,1478848799.673 [NAL9602](INFO): NAL9602 initialized
2016-11-11T07:19:59.703Z,1478848799.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:19:59.722Z,1478848799.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:00.103Z,1478848800.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:00.136Z,1478848800.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:00.523Z,1478848800.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:00.564Z,1478848800.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:00.907Z,1478848800.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:00.967Z,1478848800.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:01.313Z,1478848801.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:01.323Z,1478848801.323 [PNI_TCM](ERROR): CRC does not match. Expected:0x12942 got:0x6978
2016-11-11T07:20:01.349Z,1478848801.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:01.689Z,1478848801.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:01.737Z,1478848801.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:02.090Z,1478848802.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:02.135Z,1478848802.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:02.500Z,1478848802.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:02.537Z,1478848802.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:02.905Z,1478848802.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:02.945Z,1478848802.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:03.310Z,1478848803.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:03.338Z,1478848803.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:03.701Z,1478848803.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:03.783Z,1478848803.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:04.092Z,1478848804.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:04.146Z,1478848804.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:04.492Z,1478848804.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:04.518Z,1478848804.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:04.900Z,1478848804.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:04.957Z,1478848804.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:05.298Z,1478848805.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:05.330Z,1478848805.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:05.689Z,1478848805.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:05.742Z,1478848805.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:06.098Z,1478848806.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:06.162Z,1478848806.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:06.491Z,1478848806.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:06.518Z,1478848806.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:06.889Z,1478848806.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:06.925Z,1478848806.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:07.308Z,1478848807.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:07.333Z,1478848807.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:07.714Z,1478848807.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:07.733Z,1478848807.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:08.128Z,1478848808.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:08.143Z,1478848808.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:08.500Z,1478848808.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:08.533Z,1478848808.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:08.896Z,1478848808.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:08.928Z,1478848808.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:09.296Z,1478848809.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:09.321Z,1478848809.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:09.698Z,1478848809.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:09.714Z,1478848809.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:10.098Z,1478848810.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:10.143Z,1478848810.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:10.492Z,1478848810.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:10.528Z,1478848810.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:10.899Z,1478848810.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:10.915Z,1478848810.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:11.298Z,1478848811.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:11.321Z,1478848811.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:11.689Z,1478848811.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:11.723Z,1478848811.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:12.093Z,1478848812.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:12.112Z,1478848812.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:12.505Z,1478848812.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:12.520Z,1478848812.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:12.912Z,1478848812.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:12.950Z,1478848812.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:13.304Z,1478848813.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:13.341Z,1478848813.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:13.714Z,1478848813.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:13.720Z,1478848813.720 [PNI_TCM](ERROR): CRC does not match. Expected:0x44336 got:0x1857
2016-11-11T07:20:13.749Z,1478848813.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:14.099Z,1478848814.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:14.115Z,1478848814.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:14.493Z,1478848814.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:14.517Z,1478848814.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:14.900Z,1478848814.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:14.923Z,1478848814.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:15.289Z,1478848815.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:15.319Z,1478848815.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:15.707Z,1478848815.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:15.723Z,1478848815.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:16.105Z,1478848816.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:16.120Z,1478848816.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:16.489Z,1478848816.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:16.523Z,1478848816.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:16.890Z,1478848816.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:16.928Z,1478848816.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:17.292Z,1478848817.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:17.330Z,1478848817.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:17.728Z,1478848817.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:17.743Z,1478848817.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:18.101Z,1478848818.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:18.169Z,1478848818.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:18.506Z,1478848818.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:18.565Z,1478848818.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:18.901Z,1478848818.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:18.925Z,1478848818.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:19.291Z,1478848819.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:19.345Z,1478848819.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:19.690Z,1478848819.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:19.726Z,1478848819.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:20.098Z,1478848820.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:20.116Z,1478848820.116 [PNI_TCM](ERROR): CRC does not match. Expected:0x53563 got:0x19225
2016-11-11T07:20:20.169Z,1478848820.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:20.491Z,1478848820.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:20.537Z,1478848820.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:20.890Z,1478848820.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:20.926Z,1478848820.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:21.289Z,1478848821.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:21.324Z,1478848821.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:21.695Z,1478848821.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:21.702Z,1478848821.702 [PNI_TCM](ERROR): CRC does not match. Expected:0x63305 got:0x7361
2016-11-11T07:20:21.730Z,1478848821.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:22.092Z,1478848822.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:22.127Z,1478848822.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:22.490Z,1478848822.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:22.505Z,1478848822.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:22.906Z,1478848822.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:22.942Z,1478848822.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:23.304Z,1478848823.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:23.345Z,1478848823.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:23.712Z,1478848823.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:23.738Z,1478848823.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:24.100Z,1478848824.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:24.137Z,1478848824.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:24.499Z,1478848824.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:24.514Z,1478848824.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:24.899Z,1478848824.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:24.915Z,1478848824.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:25.291Z,1478848825.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:25.325Z,1478848825.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:25.689Z,1478848825.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:25.720Z,1478848825.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:26.091Z,1478848826.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:26.118Z,1478848826.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:26.504Z,1478848826.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:26.519Z,1478848826.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:26.890Z,1478848826.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:26.925Z,1478848826.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:27.293Z,1478848827.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:27.325Z,1478848827.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:27.690Z,1478848827.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:27.717Z,1478848827.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:28.119Z,1478848828.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:28.138Z,1478848828.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:28.515Z,1478848828.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:28.531Z,1478848828.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:28.904Z,1478848828.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:28.939Z,1478848828.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:29.304Z,1478848829.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:29.337Z,1478848829.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:29.702Z,1478848829.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:29.717Z,1478848829.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:30.093Z,1478848830.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:30.120Z,1478848830.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:30.497Z,1478848830.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:30.512Z,1478848830.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:30.892Z,1478848830.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:30.925Z,1478848830.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:31.291Z,1478848831.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:31.319Z,1478848831.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:31.690Z,1478848831.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:31.724Z,1478848831.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:32.098Z,1478848832.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:32.125Z,1478848832.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:32.495Z,1478848832.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:32.557Z,1478848832.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:32.893Z,1478848832.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:32.913Z,1478848832.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:33.304Z,1478848833.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:33.350Z,1478848833.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:33.702Z,1478848833.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:33.718Z,1478848833.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:34.112Z,1478848834.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:34.157Z,1478848834.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:34.506Z,1478848834.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:34.553Z,1478848834.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:34.889Z,1478848834.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:34.924Z,1478848834.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:35.289Z,1478848835.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:35.333Z,1478848835.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:35.702Z,1478848835.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:35.718Z,1478848835.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:36.109Z,1478848836.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:36.125Z,1478848836.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:36.490Z,1478848836.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:36.527Z,1478848836.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:36.889Z,1478848836.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:36.925Z,1478848836.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:37.291Z,1478848837.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:37.323Z,1478848837.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:37.689Z,1478848837.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:37.705Z,1478848837.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:38.101Z,1478848838.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:38.129Z,1478848838.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:38.508Z,1478848838.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:38.544Z,1478848838.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:38.904Z,1478848838.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:38.919Z,1478848838.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:39.304Z,1478848839.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:39.320Z,1478848839.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:39.705Z,1478848839.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:39.726Z,1478848839.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:40.101Z,1478848840.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:40.126Z,1478848840.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:40.490Z,1478848840.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:40.516Z,1478848840.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:40.904Z,1478848840.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:40.920Z,1478848840.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:41.289Z,1478848841.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:41.324Z,1478848841.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:41.689Z,1478848841.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:41.715Z,1478848841.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:42.089Z,1478848842.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:42.120Z,1478848842.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:42.489Z,1478848842.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:42.525Z,1478848842.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:42.889Z,1478848842.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:42.929Z,1478848842.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:43.293Z,1478848843.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:43.333Z,1478848843.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:43.711Z,1478848843.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:43.741Z,1478848843.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:44.112Z,1478848844.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:44.145Z,1478848844.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:44.520Z,1478848844.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:44.535Z,1478848844.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:44.913Z,1478848844.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:44.933Z,1478848844.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:48.386Z,1478848848.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:48.450Z,1478848848.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:48.549Z,1478848848.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:48.572Z,1478848848.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:48.940Z,1478848848.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:48.994Z,1478848848.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:49.338Z,1478848849.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:49.358Z,1478848849.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:49.743Z,1478848849.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:49.801Z,1478848849.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:50.152Z,1478848850.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:50.188Z,1478848850.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:50.530Z,1478848850.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:50.573Z,1478848850.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:50.933Z,1478848850.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:50.948Z,1478848850.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:51.332Z,1478848851.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:51.353Z,1478848851.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:51.732Z,1478848851.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:51.748Z,1478848851.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:52.136Z,1478848852.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:52.152Z,1478848852.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:52.534Z,1478848852.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:52.549Z,1478848852.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:52.925Z,1478848852.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:52.958Z,1478848852.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:53.325Z,1478848853.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:53.357Z,1478848853.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:53.742Z,1478848853.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:53.758Z,1478848853.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:54.144Z,1478848854.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:54.165Z,1478848854.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:54.543Z,1478848854.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:54.558Z,1478848854.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:54.948Z,1478848854.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:54.969Z,1478848854.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:55.344Z,1478848855.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:55.360Z,1478848855.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:55.725Z,1478848855.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:55.761Z,1478848855.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:56.125Z,1478848856.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:56.161Z,1478848856.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:56.525Z,1478848856.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:56.561Z,1478848856.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:56.925Z,1478848856.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:56.949Z,1478848856.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:57.325Z,1478848857.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:57.369Z,1478848857.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:57.556Z,1478848857.556 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T07:20:57.556Z,1478848857.556 [Rowe_600LCM] Communications Fault, FailCount= 1
2016-11-11T07:20:57.556Z,1478848857.556 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T07:20:57.725Z,1478848857.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:57.745Z,1478848857.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T07:20:57.746Z,1478848857.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:57.766Z,1478848857.766 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T07:20:57.959Z,1478848857.959 [Rowe_600LCM](INFO): Powering down
2016-11-11T07:20:58.129Z,1478848858.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:58.144Z,1478848858.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T07:20:58.145Z,1478848858.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:58.534Z,1478848858.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:58.565Z,1478848858.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:20:58.566Z,1478848858.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:58.925Z,1478848858.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:58.961Z,1478848858.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:20:58.962Z,1478848858.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:59.352Z,1478848859.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:59.366Z,1478848859.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:20:59.368Z,1478848859.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:20:59.390Z,1478848859.390 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T07:20:59.390Z,1478848859.390 [Rowe_600LCM] No Fault, FailCount= 1
2016-11-11T07:20:59.575Z,1478848859.575 [Rowe_600LCM](INFO): Initializing
2016-11-11T07:20:59.576Z,1478848859.576 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T07:20:59.576Z,1478848859.576 [Rowe_600LCM](INFO): LCM OK
2016-11-11T07:20:59.576Z,1478848859.576 [Rowe_600LCM](INFO): Powering up
2016-11-11T07:20:59.755Z,1478848859.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:20:59.769Z,1478848859.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:20:59.771Z,1478848859.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:00.144Z,1478848860.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:00.172Z,1478848860.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:21:00.174Z,1478848860.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:00.536Z,1478848860.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:00.551Z,1478848860.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:21:00.560Z,1478848860.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:00.937Z,1478848860.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:00.956Z,1478848860.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:21:00.957Z,1478848860.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:01.332Z,1478848861.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:01.347Z,1478848861.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:21:01.348Z,1478848861.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:01.732Z,1478848861.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:01.753Z,1478848861.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:21:01.754Z,1478848861.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:02.137Z,1478848862.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:02.208Z,1478848862.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:21:02.210Z,1478848862.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:02.536Z,1478848862.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:02.593Z,1478848862.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:21:02.594Z,1478848862.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:02.925Z,1478848862.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:02.957Z,1478848862.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:21:02.958Z,1478848862.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:03.325Z,1478848863.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:03.365Z,1478848863.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:21:03.366Z,1478848863.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:03.730Z,1478848863.730 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T07:21:03.733Z,1478848863.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:03.819Z,1478848863.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:21:03.825Z,1478848863.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:03.914Z,1478848863.914 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T07:21:03.916Z,1478848863.916 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T07:21:03.917Z,1478848863.917 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T07:21:03.918Z,1478848863.918 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T07:21:04.130Z,1478848864.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:04.218Z,1478848864.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T07:21:04.228Z,1478848864.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:04.540Z,1478848864.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:04.589Z,1478848864.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:04.936Z,1478848864.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:04.962Z,1478848864.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:05.350Z,1478848865.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:05.390Z,1478848865.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:05.739Z,1478848865.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:05.774Z,1478848865.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:06.133Z,1478848866.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:06.153Z,1478848866.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:06.531Z,1478848866.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:06.547Z,1478848866.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:06.933Z,1478848866.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:06.953Z,1478848866.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:07.337Z,1478848867.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:07.352Z,1478848867.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:07.733Z,1478848867.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:07.749Z,1478848867.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:08.130Z,1478848868.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:08.156Z,1478848868.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:08.529Z,1478848868.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:08.562Z,1478848868.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:08.925Z,1478848868.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:08.962Z,1478848868.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:09.347Z,1478848869.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:09.362Z,1478848869.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:09.751Z,1478848869.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:09.767Z,1478848869.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:10.129Z,1478848870.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:10.161Z,1478848870.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:10.525Z,1478848870.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:10.562Z,1478848870.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:10.925Z,1478848870.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:10.961Z,1478848870.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:11.325Z,1478848871.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:11.361Z,1478848871.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:11.738Z,1478848871.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:11.774Z,1478848871.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:12.125Z,1478848872.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:12.149Z,1478848872.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:12.526Z,1478848872.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:12.581Z,1478848872.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:12.925Z,1478848872.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:12.969Z,1478848872.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:13.326Z,1478848873.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:13.341Z,1478848873.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:13.734Z,1478848873.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:13.766Z,1478848873.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:14.134Z,1478848874.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:14.179Z,1478848874.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:14.533Z,1478848874.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:14.553Z,1478848874.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:14.929Z,1478848874.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:14.945Z,1478848874.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:15.334Z,1478848875.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:15.362Z,1478848875.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:15.737Z,1478848875.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:15.757Z,1478848875.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:16.137Z,1478848876.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:16.152Z,1478848876.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:16.540Z,1478848876.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:16.561Z,1478848876.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:16.926Z,1478848876.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:17.033Z,1478848877.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:17.337Z,1478848877.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:17.357Z,1478848877.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:17.733Z,1478848877.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:17.790Z,1478848877.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:18.145Z,1478848878.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:18.164Z,1478848878.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:18.543Z,1478848878.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:18.604Z,1478848878.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:18.925Z,1478848878.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:18.966Z,1478848878.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:19.325Z,1478848879.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:19.361Z,1478848879.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:19.725Z,1478848879.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:19.757Z,1478848879.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:20.126Z,1478848880.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:20.153Z,1478848880.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:20.528Z,1478848880.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:20.555Z,1478848880.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:20.932Z,1478848880.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:20.952Z,1478848880.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:21.333Z,1478848881.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:21.353Z,1478848881.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:21.725Z,1478848881.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:21.757Z,1478848881.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:22.133Z,1478848882.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:22.169Z,1478848882.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:22.548Z,1478848882.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:22.589Z,1478848882.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:22.942Z,1478848882.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:22.978Z,1478848882.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:23.333Z,1478848883.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:23.348Z,1478848883.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:23.733Z,1478848883.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:23.753Z,1478848883.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:24.128Z,1478848884.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:24.158Z,1478848884.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:24.532Z,1478848884.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:24.548Z,1478848884.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:24.933Z,1478848884.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:24.948Z,1478848884.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:25.328Z,1478848885.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:25.360Z,1478848885.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:25.730Z,1478848885.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:25.745Z,1478848885.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:26.137Z,1478848886.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:26.152Z,1478848886.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:26.529Z,1478848886.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:26.552Z,1478848886.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:26.940Z,1478848886.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:26.955Z,1478848886.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:27.340Z,1478848887.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:27.368Z,1478848887.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:27.737Z,1478848887.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:27.784Z,1478848887.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:28.137Z,1478848888.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:28.184Z,1478848888.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:28.533Z,1478848888.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:28.548Z,1478848888.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:28.939Z,1478848888.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:28.989Z,1478848888.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:29.331Z,1478848889.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:29.346Z,1478848889.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:29.733Z,1478848889.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:29.753Z,1478848889.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:30.128Z,1478848890.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:30.156Z,1478848890.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:30.537Z,1478848890.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:30.553Z,1478848890.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:30.934Z,1478848890.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:31.009Z,1478848891.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:31.325Z,1478848891.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:31.341Z,1478848891.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:31.741Z,1478848891.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:31.797Z,1478848891.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:32.128Z,1478848892.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:32.149Z,1478848892.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:32.528Z,1478848892.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:32.585Z,1478848892.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:32.933Z,1478848892.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:32.993Z,1478848892.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:33.325Z,1478848893.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:33.351Z,1478848893.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:33.733Z,1478848893.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:33.753Z,1478848893.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:34.133Z,1478848894.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:34.166Z,1478848894.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:34.530Z,1478848894.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:34.561Z,1478848894.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:34.925Z,1478848894.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:34.970Z,1478848894.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:35.343Z,1478848895.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:35.385Z,1478848895.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:35.739Z,1478848895.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:35.786Z,1478848895.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:36.125Z,1478848896.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:36.157Z,1478848896.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:36.536Z,1478848896.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:36.557Z,1478848896.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:36.925Z,1478848896.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:36.957Z,1478848896.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:37.325Z,1478848897.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:37.361Z,1478848897.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:37.737Z,1478848897.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:37.771Z,1478848897.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:38.137Z,1478848898.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:38.172Z,1478848898.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:38.529Z,1478848898.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:38.544Z,1478848898.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:38.933Z,1478848898.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:38.953Z,1478848898.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:39.332Z,1478848899.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:39.353Z,1478848899.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:39.740Z,1478848899.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:39.784Z,1478848899.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:40.153Z,1478848900.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:40.169Z,1478848900.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:40.534Z,1478848900.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:40.548Z,1478848900.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:40.929Z,1478848900.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:40.949Z,1478848900.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:41.333Z,1478848901.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:41.353Z,1478848901.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:41.725Z,1478848901.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:41.793Z,1478848901.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:42.129Z,1478848902.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:42.155Z,1478848902.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:42.525Z,1478848902.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:42.557Z,1478848902.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:42.925Z,1478848902.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:42.958Z,1478848902.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:43.325Z,1478848903.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:43.353Z,1478848903.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:43.726Z,1478848903.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:43.742Z,1478848903.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:43.771Z,1478848903.771 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T07:16:43.6Z
2016-11-11T07:21:43.771Z,1478848903.772 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T07:21:43.772Z,1478848903.772 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T07:21:44.152Z,1478848904.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:44.186Z,1478848904.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:44.982Z,1478848904.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:45.061Z,1478848905.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:45.176Z,1478848905.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:45.200Z,1478848905.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:48.552Z,1478848908.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:48.616Z,1478848908.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:48.705Z,1478848908.705 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20161111T044527/Courier0060.lzma
2016-11-11T07:21:48.737Z,1478848908.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:48.774Z,1478848908.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:49.119Z,1478848909.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:49.189Z,1478848909.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:49.489Z,1478848909.489 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0060.lzma.bak
2016-11-11T07:21:49.489Z,1478848909.489 [DataOverHttps](INFO): SBD MOMSN=4555153
2016-11-11T07:21:49.535Z,1478848909.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:49.590Z,1478848909.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:50.964Z,1478848910.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:50.985Z,1478848910.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:51.092Z,1478848911.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:51.118Z,1478848911.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:54.588Z,1478848914.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:54.609Z,1478848914.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:54.718Z,1478848914.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:54.751Z,1478848914.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:55.100Z,1478848915.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:55.137Z,1478848915.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:55.512Z,1478848915.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:55.557Z,1478848915.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:55.909Z,1478848915.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:55.933Z,1478848915.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:56.315Z,1478848916.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:56.333Z,1478848916.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:59.770Z,1478848919.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:59.788Z,1478848919.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:21:59.851Z,1478848919.851 [DataOverHttps](INFO): Sending 315 bytes from file Logs/20161111T044527/Express0061.lzma
2016-11-11T07:21:59.886Z,1478848919.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:21:59.929Z,1478848919.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:00.273Z,1478848920.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:00.305Z,1478848920.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:00.645Z,1478848920.645 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0061.lzma.bak
2016-11-11T07:22:00.645Z,1478848920.645 [DataOverHttps](INFO): SBD MOMSN=4555156
2016-11-11T07:22:00.693Z,1478848920.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:00.701Z,1478848920.701 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T07:22:00.701Z,1478848920.701 [BPC1] Data Fault, FailCount= 1
2016-11-11T07:22:00.701Z,1478848920.701 [BPC1](ERROR): Data Fault
2016-11-11T07:22:00.710Z,1478848920.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:00.765Z,1478848920.764 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T07:22:01.993Z,1478848921.993 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T07:22:02.009Z,1478848922.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:02.040Z,1478848922.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:02.049Z,1478848922.049 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T07:22:02.049Z,1478848922.049 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T07:22:02.049Z,1478848922.049 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T07:22:02.138Z,1478848922.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:02.184Z,1478848922.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:02.208Z,1478848922.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:03.004Z,1478848923.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:05.503Z,1478848925.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:05.565Z,1478848925.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:05.617Z,1478848925.617 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:22:05.618Z,1478848925.618 [BPC1] No Fault, FailCount= 1
2016-11-11T07:22:05.664Z,1478848925.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:05.784Z,1478848925.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:06.057Z,1478848926.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:06.073Z,1478848926.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:06.457Z,1478848926.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:06.510Z,1478848926.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:06.854Z,1478848926.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:06.873Z,1478848926.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:07.232Z,1478848927.232 [NAL9602](INFO): Powering down
2016-11-11T07:22:07.258Z,1478848927.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:07.285Z,1478848927.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:07.657Z,1478848927.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:07.673Z,1478848927.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:08.049Z,1478848928.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:08.081Z,1478848928.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:08.449Z,1478848928.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:08.482Z,1478848928.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:08.849Z,1478848928.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:08.882Z,1478848928.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:09.256Z,1478848929.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:09.280Z,1478848929.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:09.649Z,1478848929.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:09.686Z,1478848929.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:10.049Z,1478848930.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:10.081Z,1478848930.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:10.457Z,1478848930.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:10.487Z,1478848930.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:10.849Z,1478848930.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:10.885Z,1478848930.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:11.249Z,1478848931.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:11.282Z,1478848931.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:11.661Z,1478848931.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:11.676Z,1478848931.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:12.057Z,1478848932.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:12.077Z,1478848932.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:12.462Z,1478848932.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:12.477Z,1478848932.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:12.860Z,1478848932.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:12.876Z,1478848932.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:13.257Z,1478848933.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:13.277Z,1478848933.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:13.654Z,1478848933.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:13.673Z,1478848933.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:14.057Z,1478848934.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:14.078Z,1478848934.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:14.456Z,1478848934.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:14.472Z,1478848934.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:14.859Z,1478848934.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:14.874Z,1478848934.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:15.261Z,1478848935.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:15.277Z,1478848935.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:15.656Z,1478848935.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:15.685Z,1478848935.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:16.049Z,1478848936.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:16.069Z,1478848936.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:16.453Z,1478848936.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:16.474Z,1478848936.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:16.850Z,1478848936.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:16.894Z,1478848936.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:17.253Z,1478848937.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:17.273Z,1478848937.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:17.653Z,1478848937.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:17.673Z,1478848937.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:18.049Z,1478848938.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:18.069Z,1478848938.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:18.453Z,1478848938.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:18.506Z,1478848938.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:18.849Z,1478848938.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:18.869Z,1478848938.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:19.253Z,1478848939.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:19.294Z,1478848939.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:19.649Z,1478848939.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:19.669Z,1478848939.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:20.053Z,1478848940.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:20.101Z,1478848940.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:20.449Z,1478848940.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:20.490Z,1478848940.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:20.853Z,1478848940.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:20.868Z,1478848940.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:21.267Z,1478848941.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:21.282Z,1478848941.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:21.653Z,1478848941.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:21.673Z,1478848941.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:22.053Z,1478848942.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:22.068Z,1478848942.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:22.453Z,1478848942.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:22.474Z,1478848942.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:22.849Z,1478848942.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:22.869Z,1478848942.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:23.249Z,1478848943.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:23.269Z,1478848943.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:23.653Z,1478848943.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:23.673Z,1478848943.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:24.049Z,1478848944.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:24.069Z,1478848944.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:24.453Z,1478848944.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:24.468Z,1478848944.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:24.850Z,1478848944.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:24.865Z,1478848944.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:25.254Z,1478848945.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:25.269Z,1478848945.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:25.650Z,1478848945.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:25.665Z,1478848945.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:26.054Z,1478848946.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:26.069Z,1478848946.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:26.450Z,1478848946.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:26.498Z,1478848946.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:26.854Z,1478848946.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:26.868Z,1478848946.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:27.253Z,1478848947.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:27.269Z,1478848947.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:27.657Z,1478848947.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:27.677Z,1478848947.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:28.053Z,1478848948.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:28.069Z,1478848948.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:28.449Z,1478848948.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:28.464Z,1478848948.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:28.853Z,1478848948.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:28.874Z,1478848948.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:29.249Z,1478848949.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:29.269Z,1478848949.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:29.653Z,1478848949.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:29.669Z,1478848949.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:30.062Z,1478848950.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:30.087Z,1478848950.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:30.453Z,1478848950.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:30.473Z,1478848950.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:30.853Z,1478848950.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:30.868Z,1478848950.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:31.253Z,1478848951.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:31.273Z,1478848951.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:31.653Z,1478848951.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:31.669Z,1478848951.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:32.049Z,1478848952.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:32.058Z,1478848952.058 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T07:22:32.058Z,1478848952.058 [BPC1] Data Fault, FailCount= 1
2016-11-11T07:22:32.058Z,1478848952.058 [BPC1](ERROR): Data Fault
2016-11-11T07:22:32.066Z,1478848952.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:32.086Z,1478848952.086 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T07:22:32.453Z,1478848952.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:32.474Z,1478848952.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:32.853Z,1478848952.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:32.867Z,1478848952.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:33.253Z,1478848953.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:33.268Z,1478848953.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:33.288Z,1478848953.288 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:22:33.289Z,1478848953.289 [BPC1] No Fault, FailCount= 1
2016-11-11T07:22:33.653Z,1478848953.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:33.857Z,1478848953.857 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:33.858Z,1478848953.858 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2016-11-11T07:22:33.858Z,1478848953.858 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:22:33.882Z,1478848953.882 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:33.882Z,1478848953.882 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 32
2016-11-11T07:22:33.882Z,1478848953.882 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:22:33.922Z,1478848953.922 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:22:33.923Z,1478848953.923 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:22:34.050Z,1478848954.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:34.138Z,1478848954.138 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:22:34.138Z,1478848954.138 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2016-11-11T07:22:34.139Z,1478848954.139 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:22:34.139Z,1478848954.139 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 32
2016-11-11T07:22:34.449Z,1478848954.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:34.496Z,1478848954.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:22:34.496Z,1478848954.496 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:22:34.497Z,1478848954.497 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:22:34.501Z,1478848954.501 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:22:34.502Z,1478848954.502 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:22:34.502Z,1478848954.502 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:22:34.849Z,1478848954.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:34.877Z,1478848954.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:35.249Z,1478848955.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:35.273Z,1478848955.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:35.649Z,1478848955.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:35.674Z,1478848955.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:36.049Z,1478848956.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:36.073Z,1478848956.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:36.449Z,1478848956.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:36.477Z,1478848956.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:36.496Z,1478848956.496 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:36.496Z,1478848956.496 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 32
2016-11-11T07:22:36.496Z,1478848956.496 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:22:36.522Z,1478848956.522 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:22:36.849Z,1478848956.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:36.873Z,1478848956.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:36.912Z,1478848956.912 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:22:36.913Z,1478848956.912 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 32
2016-11-11T07:22:37.249Z,1478848957.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:37.285Z,1478848957.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:37.291Z,1478848957.291 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:22:37.292Z,1478848957.292 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:22:37.292Z,1478848957.292 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:22:37.649Z,1478848957.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:37.677Z,1478848957.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:38.049Z,1478848958.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:38.073Z,1478848958.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:38.448Z,1478848958.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:38.477Z,1478848958.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:38.850Z,1478848958.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:38.882Z,1478848958.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:39.261Z,1478848959.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:39.282Z,1478848959.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:39.664Z,1478848959.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:39.685Z,1478848959.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:40.049Z,1478848960.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:40.076Z,1478848960.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:40.449Z,1478848960.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:40.472Z,1478848960.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:40.853Z,1478848960.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:40.889Z,1478848960.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:41.249Z,1478848961.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:41.292Z,1478848961.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:41.649Z,1478848961.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:41.669Z,1478848961.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:42.052Z,1478848962.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:42.077Z,1478848962.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:42.456Z,1478848962.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:42.477Z,1478848962.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:42.856Z,1478848962.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:42.872Z,1478848962.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:43.249Z,1478848963.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:43.274Z,1478848963.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:43.669Z,1478848963.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:43.722Z,1478848963.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:44.056Z,1478848964.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:44.072Z,1478848964.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:44.465Z,1478848964.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:44.485Z,1478848964.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:44.856Z,1478848964.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:44.879Z,1478848964.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:45.260Z,1478848965.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:45.276Z,1478848965.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:45.687Z,1478848965.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:45.727Z,1478848965.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:46.049Z,1478848966.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:46.105Z,1478848966.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:46.449Z,1478848966.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:46.505Z,1478848966.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:46.849Z,1478848966.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:46.889Z,1478848966.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:47.249Z,1478848967.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:47.264Z,1478848967.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:47.655Z,1478848967.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:47.705Z,1478848967.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:48.061Z,1478848968.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:48.076Z,1478848968.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:48.456Z,1478848968.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:48.507Z,1478848968.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:48.856Z,1478848968.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:48.907Z,1478848968.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:49.252Z,1478848969.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:49.323Z,1478848969.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:49.649Z,1478848969.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:49.685Z,1478848969.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:50.049Z,1478848970.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:50.085Z,1478848970.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:50.453Z,1478848970.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:50.485Z,1478848970.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:50.849Z,1478848970.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:50.885Z,1478848970.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:51.249Z,1478848971.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:51.272Z,1478848971.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:51.657Z,1478848971.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:51.672Z,1478848971.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:52.056Z,1478848972.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:52.071Z,1478848972.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:52.455Z,1478848972.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:52.470Z,1478848972.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:52.859Z,1478848972.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:52.874Z,1478848972.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:53.256Z,1478848973.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:53.284Z,1478848973.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:53.649Z,1478848973.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:53.676Z,1478848973.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:54.049Z,1478848974.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:54.089Z,1478848974.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:54.449Z,1478848974.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:54.464Z,1478848974.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:54.856Z,1478848974.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:54.896Z,1478848974.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:55.261Z,1478848975.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:55.276Z,1478848975.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:55.649Z,1478848975.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:55.683Z,1478848975.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:56.049Z,1478848976.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:56.075Z,1478848976.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:56.464Z,1478848976.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:56.480Z,1478848976.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:56.612Z,1478848976.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:56.849Z,1478848976.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:56.885Z,1478848976.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:57.251Z,1478848977.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:57.298Z,1478848977.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:57.409Z,1478848977.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:57.702Z,1478848977.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:57.760Z,1478848977.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:58.059Z,1478848978.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:58.074Z,1478848978.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:58.451Z,1478848978.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:58.485Z,1478848978.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:58.852Z,1478848978.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:58.898Z,1478848978.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:59.255Z,1478848979.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:59.304Z,1478848979.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:22:59.663Z,1478848979.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:22:59.726Z,1478848979.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:00.058Z,1478848980.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:00.082Z,1478848980.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:00.451Z,1478848980.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:00.517Z,1478848980.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:00.860Z,1478848980.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:00.942Z,1478848980.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:01.266Z,1478848981.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:01.341Z,1478848981.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:01.651Z,1478848981.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:01.709Z,1478848981.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:02.052Z,1478848982.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:02.113Z,1478848982.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:02.460Z,1478848982.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:02.504Z,1478848982.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:07.861Z,1478848987.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:07.910Z,1478848987.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:08.025Z,1478848988.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:08.051Z,1478848988.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:08.368Z,1478848988.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:08.446Z,1478848988.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:08.765Z,1478848988.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:08.780Z,1478848988.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:09.180Z,1478848989.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:09.209Z,1478848989.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:09.561Z,1478848989.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:09.593Z,1478848989.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:09.976Z,1478848989.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:09.997Z,1478848989.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:10.361Z,1478848990.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:10.413Z,1478848990.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:10.761Z,1478848990.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:10.804Z,1478848990.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:11.180Z,1478848991.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:11.226Z,1478848991.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:11.568Z,1478848991.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:11.668Z,1478848991.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:11.970Z,1478848991.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:11.997Z,1478848991.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:12.370Z,1478848992.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:12.397Z,1478848992.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:12.763Z,1478848992.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:12.797Z,1478848992.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:13.163Z,1478848993.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:13.201Z,1478848993.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:13.563Z,1478848993.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:13.656Z,1478848993.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:13.963Z,1478848993.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:13.998Z,1478848993.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:14.368Z,1478848994.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:14.415Z,1478848994.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:14.786Z,1478848994.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:14.841Z,1478848994.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:15.170Z,1478848995.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:15.190Z,1478848995.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:15.570Z,1478848995.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:15.593Z,1478848995.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:15.960Z,1478848995.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:15.994Z,1478848995.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:16.369Z,1478848996.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:16.437Z,1478848996.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:16.765Z,1478848996.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:16.801Z,1478848996.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:17.163Z,1478848997.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:17.197Z,1478848997.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:17.570Z,1478848997.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:17.590Z,1478848997.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:17.963Z,1478848997.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:18.000Z,1478848998.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:18.363Z,1478848998.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:18.404Z,1478848998.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:18.763Z,1478848998.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:18.779Z,1478848998.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:19.163Z,1478848999.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:19.209Z,1478848999.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:19.570Z,1478848999.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:19.590Z,1478848999.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:19.963Z,1478848999.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:20.046Z,1478849000.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:20.363Z,1478849000.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:20.390Z,1478849000.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:20.773Z,1478849000.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:20.829Z,1478849000.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:21.161Z,1478849001.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:21.193Z,1478849001.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:21.561Z,1478849001.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:21.593Z,1478849001.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:21.965Z,1478849001.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:22.017Z,1478849002.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:22.361Z,1478849002.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:22.397Z,1478849002.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:22.761Z,1478849002.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:22.802Z,1478849002.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:23.161Z,1478849003.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:23.217Z,1478849003.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:23.568Z,1478849003.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:23.589Z,1478849003.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:23.968Z,1478849003.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:23.986Z,1478849003.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:24.372Z,1478849004.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:24.388Z,1478849004.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:24.768Z,1478849004.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:24.784Z,1478849004.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:25.176Z,1478849005.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:25.197Z,1478849005.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:25.561Z,1478849005.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:25.641Z,1478849005.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:25.961Z,1478849005.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:25.976Z,1478849005.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:26.361Z,1478849006.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:26.381Z,1478849006.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:26.766Z,1478849006.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:26.785Z,1478849006.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:27.164Z,1478849007.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:27.180Z,1478849007.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:27.569Z,1478849007.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:27.642Z,1478849007.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:27.973Z,1478849007.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:27.993Z,1478849007.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:28.368Z,1478849008.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:28.384Z,1478849008.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:28.770Z,1478849008.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:28.793Z,1478849008.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:29.206Z,1478849009.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:29.269Z,1478849009.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:29.561Z,1478849009.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:29.576Z,1478849009.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:29.965Z,1478849009.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:29.985Z,1478849009.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:30.373Z,1478849010.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:30.393Z,1478849010.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:30.768Z,1478849010.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:30.784Z,1478849010.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:31.161Z,1478849011.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:31.196Z,1478849011.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:31.561Z,1478849011.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:31.597Z,1478849011.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:31.962Z,1478849011.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:31.977Z,1478849011.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:32.362Z,1478849012.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:32.381Z,1478849012.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:32.799Z,1478849012.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:32.815Z,1478849012.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:33.169Z,1478849013.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:33.185Z,1478849013.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:33.569Z,1478849013.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:33.585Z,1478849013.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:33.969Z,1478849013.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:33.984Z,1478849013.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:34.103Z,1478849014.103 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T07:23:34.103Z,1478849014.103 [Rowe_600LCM] Communications Fault, FailCount= 2
2016-11-11T07:23:34.103Z,1478849014.103 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T07:23:34.369Z,1478849014.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:34.384Z,1478849014.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T07:23:34.385Z,1478849014.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:34.421Z,1478849014.421 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T07:23:34.507Z,1478849014.507 [Rowe_600LCM](INFO): Powering down
2016-11-11T07:23:34.767Z,1478849014.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:34.793Z,1478849014.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T07:23:34.794Z,1478849014.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:35.168Z,1478849015.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:35.241Z,1478849015.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2016-11-11T07:23:35.242Z,1478849015.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:35.561Z,1478849015.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:35.595Z,1478849015.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:23:35.596Z,1478849015.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:35.961Z,1478849015.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:35.996Z,1478849015.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:23:35.997Z,1478849015.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:36.025Z,1478849016.025 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T07:23:36.025Z,1478849016.025 [Rowe_600LCM] No Fault, FailCount= 2
2016-11-11T07:23:36.123Z,1478849016.123 [Rowe_600LCM](INFO): Initializing
2016-11-11T07:23:36.124Z,1478849016.124 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T07:23:36.124Z,1478849016.124 [Rowe_600LCM](INFO): LCM OK
2016-11-11T07:23:36.124Z,1478849016.124 [Rowe_600LCM](INFO): Powering up
2016-11-11T07:23:36.361Z,1478849016.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:36.413Z,1478849016.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:23:36.414Z,1478849016.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:36.761Z,1478849016.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:36.793Z,1478849016.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:23:36.795Z,1478849016.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:37.161Z,1478849017.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:37.205Z,1478849017.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:23:37.206Z,1478849017.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:37.561Z,1478849017.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:37.609Z,1478849017.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:23:37.610Z,1478849017.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:37.961Z,1478849017.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:38.061Z,1478849018.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2016-11-11T07:23:38.062Z,1478849018.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:38.361Z,1478849018.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:38.404Z,1478849018.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:23:38.406Z,1478849018.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:38.761Z,1478849018.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:38.803Z,1478849018.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:23:38.804Z,1478849018.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:39.161Z,1478849019.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:39.197Z,1478849019.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:23:39.198Z,1478849019.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:39.564Z,1478849019.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:39.584Z,1478849019.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:23:39.586Z,1478849019.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:39.964Z,1478849019.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:39.984Z,1478849019.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:23:39.985Z,1478849019.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:40.255Z,1478849020.254 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T07:23:40.315Z,1478849020.315 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T07:23:40.316Z,1478849020.316 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T07:23:40.317Z,1478849020.317 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T07:23:40.318Z,1478849020.318 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T07:23:40.377Z,1478849020.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:40.443Z,1478849020.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2016-11-11T07:23:40.444Z,1478849020.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:40.761Z,1478849020.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:40.797Z,1478849020.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:41.184Z,1478849021.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:41.256Z,1478849021.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:41.562Z,1478849021.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:41.594Z,1478849021.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:41.961Z,1478849021.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:41.998Z,1478849021.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:42.361Z,1478849022.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:42.388Z,1478849022.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:42.764Z,1478849022.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:42.780Z,1478849022.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:43.169Z,1478849023.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:43.190Z,1478849023.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:43.568Z,1478849023.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:43.597Z,1478849023.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:43.969Z,1478849023.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:43.985Z,1478849023.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:44.368Z,1478849024.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:44.384Z,1478849024.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:44.764Z,1478849024.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:44.786Z,1478849024.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:45.168Z,1478849025.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:45.191Z,1478849025.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:45.572Z,1478849025.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:45.593Z,1478849025.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:45.961Z,1478849025.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:45.996Z,1478849025.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:46.361Z,1478849026.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:46.387Z,1478849026.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:46.772Z,1478849026.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:46.796Z,1478849026.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:47.176Z,1478849027.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:47.197Z,1478849027.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:47.561Z,1478849027.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:47.598Z,1478849027.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:47.961Z,1478849027.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:47.994Z,1478849027.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:48.382Z,1478849028.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:48.397Z,1478849028.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:48.761Z,1478849028.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:48.794Z,1478849028.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:49.161Z,1478849029.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:49.197Z,1478849029.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:49.561Z,1478849029.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:49.597Z,1478849029.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:49.961Z,1478849029.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:50.018Z,1478849030.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:50.369Z,1478849030.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:50.401Z,1478849030.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:50.761Z,1478849030.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:50.804Z,1478849030.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:51.161Z,1478849031.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:51.176Z,1478849031.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:51.561Z,1478849031.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:51.581Z,1478849031.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:51.966Z,1478849031.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:51.981Z,1478849031.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:52.369Z,1478849032.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:52.405Z,1478849032.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:52.761Z,1478849032.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:52.769Z,1478849032.769 [BPC1](ERROR): Failed to receive battery data
2016-11-11T07:23:52.769Z,1478849032.769 [BPC1] Communications Fault, FailCount= 1
2016-11-11T07:23:52.769Z,1478849032.769 [BPC1](ERROR): Communications Fault
2016-11-11T07:23:52.809Z,1478849032.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:52.844Z,1478849032.844 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T07:23:53.167Z,1478849033.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:53.189Z,1478849033.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:53.572Z,1478849033.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:53.588Z,1478849033.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:53.968Z,1478849033.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:53.983Z,1478849033.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:54.002Z,1478849034.003 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:23:54.003Z,1478849034.003 [BPC1] No Fault, FailCount= 1
2016-11-11T07:23:54.377Z,1478849034.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:54.445Z,1478849034.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:54.761Z,1478849034.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:54.793Z,1478849034.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:55.161Z,1478849035.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:55.195Z,1478849035.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:55.561Z,1478849035.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:55.594Z,1478849035.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:55.961Z,1478849035.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:55.987Z,1478849035.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:56.361Z,1478849036.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:56.393Z,1478849036.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:56.761Z,1478849036.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:56.794Z,1478849036.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:57.172Z,1478849037.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:57.193Z,1478849037.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:57.561Z,1478849037.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:57.593Z,1478849037.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:57.962Z,1478849037.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:57.995Z,1478849037.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:58.360Z,1478849038.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:58.399Z,1478849038.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:58.761Z,1478849038.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:58.794Z,1478849038.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:59.165Z,1478849039.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:59.190Z,1478849039.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:59.581Z,1478849039.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:23:59.604Z,1478849039.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:23:59.961Z,1478849039.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:00.001Z,1478849040.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:00.366Z,1478849040.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:00.381Z,1478849040.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:00.773Z,1478849040.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:00.788Z,1478849040.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:01.169Z,1478849041.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:01.184Z,1478849041.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:01.567Z,1478849041.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:01.582Z,1478849041.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:01.964Z,1478849041.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:01.993Z,1478849041.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:02.368Z,1478849042.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:02.382Z,1478849042.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:02.776Z,1478849042.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:02.791Z,1478849042.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:06.331Z,1478849046.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:06.347Z,1478849046.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:06.444Z,1478849046.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:06.473Z,1478849046.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:06.835Z,1478849046.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:06.851Z,1478849046.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:07.228Z,1478849047.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:07.244Z,1478849047.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:07.624Z,1478849047.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:07.649Z,1478849047.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:08.021Z,1478849048.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:08.053Z,1478849048.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:08.421Z,1478849048.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:08.446Z,1478849048.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:08.829Z,1478849048.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:08.874Z,1478849048.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:09.225Z,1478849049.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:09.251Z,1478849049.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:09.621Z,1478849049.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:09.661Z,1478849049.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:10.021Z,1478849050.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:10.064Z,1478849050.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:10.421Z,1478849050.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:10.473Z,1478849050.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:10.824Z,1478849050.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:10.853Z,1478849050.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:11.228Z,1478849051.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:11.266Z,1478849051.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:11.624Z,1478849051.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:11.683Z,1478849051.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:12.029Z,1478849052.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:12.045Z,1478849052.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:12.436Z,1478849052.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:12.451Z,1478849052.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:12.829Z,1478849052.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:12.857Z,1478849052.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:13.221Z,1478849053.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:13.253Z,1478849053.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:13.621Z,1478849053.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:13.641Z,1478849053.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:14.025Z,1478849054.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:14.041Z,1478849054.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:14.426Z,1478849054.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:14.442Z,1478849054.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:14.836Z,1478849054.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:14.851Z,1478849054.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:15.225Z,1478849055.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:15.247Z,1478849055.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:15.630Z,1478849055.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:15.645Z,1478849055.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:16.029Z,1478849056.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:16.049Z,1478849056.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:16.430Z,1478849056.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:16.445Z,1478849056.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:16.833Z,1478849056.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:16.861Z,1478849056.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:17.222Z,1478849057.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:17.257Z,1478849057.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:17.622Z,1478849057.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:17.661Z,1478849057.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:18.022Z,1478849058.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:18.050Z,1478849058.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:18.421Z,1478849058.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:18.458Z,1478849058.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:18.821Z,1478849058.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:18.857Z,1478849058.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:19.221Z,1478849059.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:19.238Z,1478849059.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:19.621Z,1478849059.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:19.637Z,1478849059.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:20.020Z,1478849060.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:20.042Z,1478849060.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:20.426Z,1478849060.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:20.442Z,1478849060.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:20.829Z,1478849060.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:20.850Z,1478849060.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:21.228Z,1478849061.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:21.243Z,1478849061.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:21.628Z,1478849061.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:21.643Z,1478849061.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:22.029Z,1478849062.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:22.064Z,1478849062.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:22.421Z,1478849062.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:22.457Z,1478849062.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:22.832Z,1478849062.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:22.856Z,1478849062.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:23.221Z,1478849063.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:23.254Z,1478849063.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:23.621Z,1478849063.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:23.646Z,1478849063.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:24.021Z,1478849064.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:24.082Z,1478849064.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:24.421Z,1478849064.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:24.453Z,1478849064.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:24.821Z,1478849064.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:24.877Z,1478849064.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:25.221Z,1478849065.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:25.249Z,1478849065.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:25.621Z,1478849065.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:25.677Z,1478849065.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:26.024Z,1478849066.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:26.078Z,1478849066.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:26.424Z,1478849066.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:26.440Z,1478849066.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:26.829Z,1478849066.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:26.849Z,1478849066.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:27.221Z,1478849067.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:27.246Z,1478849067.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:27.621Z,1478849067.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:27.654Z,1478849067.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:28.021Z,1478849068.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:28.054Z,1478849068.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:28.421Z,1478849068.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:28.456Z,1478849068.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:28.821Z,1478849068.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:28.846Z,1478849068.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:29.221Z,1478849069.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:29.257Z,1478849069.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:29.621Z,1478849069.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:29.648Z,1478849069.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:30.021Z,1478849070.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:30.062Z,1478849070.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:30.432Z,1478849070.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:30.447Z,1478849070.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:30.824Z,1478849070.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:30.839Z,1478849070.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:31.227Z,1478849071.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:31.242Z,1478849071.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:31.629Z,1478849071.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:31.643Z,1478849071.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:32.032Z,1478849072.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:32.047Z,1478849072.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:32.421Z,1478849072.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:32.441Z,1478849072.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:32.824Z,1478849072.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:32.845Z,1478849072.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:33.229Z,1478849073.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:33.244Z,1478849073.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:33.632Z,1478849073.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:33.648Z,1478849073.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:34.031Z,1478849074.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:34.050Z,1478849074.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:34.421Z,1478849074.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:34.441Z,1478849074.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:34.825Z,1478849074.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:34.840Z,1478849074.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:35.232Z,1478849075.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:35.248Z,1478849075.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:35.628Z,1478849075.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:35.649Z,1478849075.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:36.029Z,1478849076.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:36.044Z,1478849076.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:36.428Z,1478849076.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:36.462Z,1478849076.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:36.829Z,1478849076.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:36.849Z,1478849076.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:37.221Z,1478849077.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:37.253Z,1478849077.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:37.632Z,1478849077.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:37.657Z,1478849077.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:38.021Z,1478849078.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:38.081Z,1478849078.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:38.421Z,1478849078.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:38.461Z,1478849078.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:38.821Z,1478849078.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:38.866Z,1478849078.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:39.224Z,1478849079.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:39.245Z,1478849079.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:39.624Z,1478849079.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:39.687Z,1478849079.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:40.032Z,1478849080.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:40.086Z,1478849080.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:40.428Z,1478849080.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:40.449Z,1478849080.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:40.833Z,1478849080.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:40.858Z,1478849080.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:41.232Z,1478849081.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:41.257Z,1478849081.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:41.621Z,1478849081.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:41.655Z,1478849081.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:42.025Z,1478849082.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:42.061Z,1478849082.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:42.421Z,1478849082.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:42.465Z,1478849082.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:42.821Z,1478849082.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:42.851Z,1478849082.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:43.232Z,1478849083.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:43.248Z,1478849083.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:43.628Z,1478849083.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:43.650Z,1478849083.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:44.021Z,1478849084.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:44.051Z,1478849084.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:44.434Z,1478849084.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:44.467Z,1478849084.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:44.833Z,1478849084.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:44.874Z,1478849084.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:45.224Z,1478849085.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:45.239Z,1478849085.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:45.629Z,1478849085.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:45.648Z,1478849085.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:46.029Z,1478849086.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:46.046Z,1478849086.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:46.421Z,1478849086.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:46.465Z,1478849086.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:46.821Z,1478849086.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:46.859Z,1478849086.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:47.221Z,1478849087.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:47.260Z,1478849087.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:47.621Z,1478849087.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:47.667Z,1478849087.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:48.021Z,1478849088.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:48.062Z,1478849088.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:48.421Z,1478849088.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:48.466Z,1478849088.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:48.839Z,1478849088.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:48.855Z,1478849088.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:49.235Z,1478849089.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:49.251Z,1478849089.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:49.621Z,1478849089.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:49.665Z,1478849089.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:50.021Z,1478849090.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:50.057Z,1478849090.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:50.442Z,1478849090.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:50.502Z,1478849090.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:50.822Z,1478849090.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:50.840Z,1478849090.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:51.221Z,1478849091.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:51.268Z,1478849091.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:51.625Z,1478849091.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:51.664Z,1478849091.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:52.030Z,1478849092.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:52.102Z,1478849092.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:52.433Z,1478849092.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:52.498Z,1478849092.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:52.820Z,1478849092.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:52.849Z,1478849092.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:53.221Z,1478849093.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:53.286Z,1478849093.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:53.621Z,1478849093.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:53.658Z,1478849093.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:54.034Z,1478849094.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:54.092Z,1478849094.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:54.432Z,1478849094.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:54.496Z,1478849094.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:54.821Z,1478849094.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:54.870Z,1478849094.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:55.222Z,1478849095.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:55.259Z,1478849095.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:55.623Z,1478849095.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:55.665Z,1478849095.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:56.021Z,1478849096.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:56.056Z,1478849096.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:56.430Z,1478849096.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:56.458Z,1478849096.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:56.831Z,1478849096.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:56.863Z,1478849096.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:57.225Z,1478849097.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:57.262Z,1478849097.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:57.622Z,1478849097.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:57.661Z,1478849097.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:58.021Z,1478849098.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:58.041Z,1478849098.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:58.426Z,1478849098.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:58.460Z,1478849098.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:58.823Z,1478849098.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:58.851Z,1478849098.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:59.221Z,1478849099.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:59.260Z,1478849099.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:24:59.621Z,1478849099.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:24:59.660Z,1478849099.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:00.023Z,1478849100.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:00.039Z,1478849100.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:00.430Z,1478849100.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:00.445Z,1478849100.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:00.828Z,1478849100.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:00.854Z,1478849100.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:01.232Z,1478849101.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:01.238Z,1478849101.238 [PNI_TCM](ERROR): CRC does not match. Expected:0x54658 got:0x54416
2016-11-11T07:25:01.266Z,1478849101.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:01.622Z,1478849101.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:01.647Z,1478849101.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:02.033Z,1478849102.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:02.053Z,1478849102.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:02.421Z,1478849102.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:02.455Z,1478849102.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:02.822Z,1478849102.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:02.857Z,1478849102.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:06.403Z,1478849106.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:06.509Z,1478849106.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:06.607Z,1478849106.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:06.641Z,1478849106.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:07.011Z,1478849107.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:07.039Z,1478849107.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:07.405Z,1478849107.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:07.471Z,1478849107.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:07.805Z,1478849107.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:07.837Z,1478849107.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:08.205Z,1478849108.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:08.281Z,1478849108.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:08.619Z,1478849108.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:08.642Z,1478849108.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:09.013Z,1478849109.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:09.085Z,1478849109.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:09.405Z,1478849109.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:09.440Z,1478849109.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:09.805Z,1478849109.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:09.841Z,1478849109.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:10.205Z,1478849110.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:10.232Z,1478849110.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:10.605Z,1478849110.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:10.641Z,1478849110.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:11.005Z,1478849111.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:11.025Z,1478849111.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:11.411Z,1478849111.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:11.426Z,1478849111.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:11.816Z,1478849111.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:11.831Z,1478849111.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:12.217Z,1478849112.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:12.237Z,1478849112.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:12.612Z,1478849112.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:12.628Z,1478849112.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:13.014Z,1478849113.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:13.029Z,1478849113.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:13.408Z,1478849113.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:13.440Z,1478849113.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:13.813Z,1478849113.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:13.828Z,1478849113.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:14.223Z,1478849114.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:14.238Z,1478849114.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:14.606Z,1478849114.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:14.638Z,1478849114.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:15.006Z,1478849115.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:15.041Z,1478849115.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:15.405Z,1478849115.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:15.441Z,1478849115.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:15.806Z,1478849115.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:15.839Z,1478849115.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:16.206Z,1478849116.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:16.233Z,1478849116.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:16.609Z,1478849116.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:16.626Z,1478849116.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:17.011Z,1478849117.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:17.027Z,1478849117.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:17.411Z,1478849117.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:17.426Z,1478849117.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:17.808Z,1478849117.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:17.838Z,1478849117.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:18.219Z,1478849118.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:18.234Z,1478849118.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:18.612Z,1478849118.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:18.628Z,1478849118.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:19.005Z,1478849119.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:19.037Z,1478849119.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:19.405Z,1478849119.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:19.441Z,1478849119.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:19.809Z,1478849119.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:19.890Z,1478849119.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:20.205Z,1478849120.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:20.241Z,1478849120.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:20.605Z,1478849120.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:20.619Z,1478849120.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:21.005Z,1478849121.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:21.020Z,1478849121.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:21.410Z,1478849121.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:21.425Z,1478849121.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:21.814Z,1478849121.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:21.829Z,1478849121.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:22.211Z,1478849122.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:22.226Z,1478849122.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:22.612Z,1478849122.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:22.626Z,1478849122.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:23.004Z,1478849123.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:23.037Z,1478849123.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:23.405Z,1478849123.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:23.437Z,1478849123.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:23.805Z,1478849123.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:23.841Z,1478849123.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:24.205Z,1478849124.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:24.213Z,1478849124.213 [BPC1](ERROR): Failed to receive battery data
2016-11-11T07:25:24.213Z,1478849124.213 [BPC1] Communications Fault, FailCount= 1
2016-11-11T07:25:24.213Z,1478849124.213 [BPC1](ERROR): Communications Fault
2016-11-11T07:25:24.263Z,1478849124.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:24.302Z,1478849124.302 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T07:25:24.613Z,1478849124.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:24.638Z,1478849124.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:25.005Z,1478849125.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:25.040Z,1478849125.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:25.405Z,1478849125.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:25.456Z,1478849125.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:25.475Z,1478849125.475 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:25:25.499Z,1478849125.499 [BPC1] No Fault, FailCount= 1
2016-11-11T07:25:25.805Z,1478849125.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:25.889Z,1478849125.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:26.205Z,1478849126.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:26.246Z,1478849126.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:26.613Z,1478849126.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:26.646Z,1478849126.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:27.008Z,1478849127.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:27.024Z,1478849127.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:27.408Z,1478849127.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:27.429Z,1478849127.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:27.812Z,1478849127.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:27.827Z,1478849127.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:28.212Z,1478849128.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:28.227Z,1478849128.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:28.617Z,1478849128.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:28.632Z,1478849128.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:29.012Z,1478849129.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:29.027Z,1478849129.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:29.413Z,1478849129.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:29.428Z,1478849129.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:29.812Z,1478849129.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:29.833Z,1478849129.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:30.205Z,1478849130.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:30.239Z,1478849130.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:30.605Z,1478849130.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:30.637Z,1478849130.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:31.005Z,1478849131.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:31.065Z,1478849131.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:31.405Z,1478849131.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:31.420Z,1478849131.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:31.805Z,1478849131.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:31.858Z,1478849131.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:32.205Z,1478849132.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:32.219Z,1478849132.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:32.617Z,1478849132.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:32.669Z,1478849132.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:33.008Z,1478849133.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:33.060Z,1478849133.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:33.410Z,1478849133.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:33.428Z,1478849133.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:33.808Z,1478849133.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:33.829Z,1478849133.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:34.212Z,1478849134.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:34.233Z,1478849134.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:34.617Z,1478849134.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:34.632Z,1478849134.632 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:34.632Z,1478849134.632 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2016-11-11T07:25:34.632Z,1478849134.632 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:25:34.639Z,1478849134.639 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:34.639Z,1478849134.639 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 33
2016-11-11T07:25:34.639Z,1478849134.639 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:25:34.689Z,1478849134.689 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:25:34.689Z,1478849134.689 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:25:35.016Z,1478849135.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:35.091Z,1478849135.092 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:25:35.092Z,1478849135.092 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2016-11-11T07:25:35.092Z,1478849135.092 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:25:35.092Z,1478849135.092 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 33
2016-11-11T07:25:35.405Z,1478849135.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:35.435Z,1478849135.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:25:35.436Z,1478849135.436 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:25:35.436Z,1478849135.436 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:25:35.445Z,1478849135.445 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:25:35.445Z,1478849135.445 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:25:35.446Z,1478849135.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:25:35.805Z,1478849135.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:35.854Z,1478849135.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:36.205Z,1478849136.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:36.220Z,1478849136.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:36.468Z,1478849136.468 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T07:25:36.468Z,1478849136.468 [Rowe_600LCM] Communications Fault, FailCount= 3
2016-11-11T07:25:36.468Z,1478849136.468 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T07:25:36.617Z,1478849136.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:36.637Z,1478849136.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T07:25:36.638Z,1478849136.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:36.707Z,1478849136.707 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T07:25:36.871Z,1478849136.871 [Rowe_600LCM](INFO): Powering down
2016-11-11T07:25:37.005Z,1478849137.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:37.030Z,1478849137.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T07:25:37.031Z,1478849137.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:37.405Z,1478849137.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:37.438Z,1478849137.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:25:37.439Z,1478849137.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:37.446Z,1478849137.446 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:37.446Z,1478849137.446 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 33
2016-11-11T07:25:37.446Z,1478849137.446 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:25:37.488Z,1478849137.488 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:25:37.813Z,1478849137.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:37.835Z,1478849137.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:25:37.836Z,1478849137.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:37.875Z,1478849137.875 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:25:37.876Z,1478849137.875 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 33
2016-11-11T07:25:38.205Z,1478849138.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:38.238Z,1478849138.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:25:38.239Z,1478849138.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:38.245Z,1478849138.245 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:25:38.245Z,1478849138.245 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:25:38.246Z,1478849138.246 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:25:38.261Z,1478849138.261 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T07:25:38.261Z,1478849138.261 [Rowe_600LCM] No Fault, FailCount= 3
2016-11-11T07:25:38.487Z,1478849138.487 [Rowe_600LCM](INFO): Initializing
2016-11-11T07:25:38.488Z,1478849138.488 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T07:25:38.488Z,1478849138.488 [Rowe_600LCM](INFO): LCM OK
2016-11-11T07:25:38.488Z,1478849138.488 [Rowe_600LCM](INFO): Powering up
2016-11-11T07:25:38.605Z,1478849138.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:38.631Z,1478849138.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:25:38.632Z,1478849138.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:39.013Z,1478849139.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:39.043Z,1478849139.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:25:39.045Z,1478849139.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:39.410Z,1478849139.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:39.425Z,1478849139.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:25:39.426Z,1478849139.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:39.808Z,1478849139.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:39.823Z,1478849139.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:25:39.824Z,1478849139.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:40.220Z,1478849140.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:40.241Z,1478849140.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:25:40.242Z,1478849140.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:40.616Z,1478849140.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:40.631Z,1478849140.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:25:40.632Z,1478849140.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:41.032Z,1478849141.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:41.080Z,1478849141.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2016-11-11T07:25:41.081Z,1478849141.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:41.405Z,1478849141.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:41.430Z,1478849141.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:25:41.432Z,1478849141.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:41.813Z,1478849141.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:41.838Z,1478849141.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:25:41.839Z,1478849141.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:42.205Z,1478849142.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:42.240Z,1478849142.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:25:42.241Z,1478849142.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:42.609Z,1478849142.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:42.658Z,1478849142.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:25:42.664Z,1478849142.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:42.738Z,1478849142.738 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T07:25:42.827Z,1478849142.827 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T07:25:42.828Z,1478849142.828 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T07:25:42.829Z,1478849142.829 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T07:25:42.830Z,1478849142.830 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T07:25:43.010Z,1478849143.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:43.027Z,1478849143.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T07:25:43.028Z,1478849143.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:43.416Z,1478849143.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:43.432Z,1478849143.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:43.812Z,1478849143.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:43.898Z,1478849143.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:44.213Z,1478849144.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:44.235Z,1478849144.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:44.605Z,1478849144.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:44.656Z,1478849144.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:45.006Z,1478849145.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:45.095Z,1478849145.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:45.405Z,1478849145.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:45.455Z,1478849145.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:45.805Z,1478849145.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:45.853Z,1478849145.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:46.209Z,1478849146.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:46.242Z,1478849146.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:46.605Z,1478849146.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:46.640Z,1478849146.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:47.020Z,1478849147.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:47.085Z,1478849147.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:47.407Z,1478849147.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:47.438Z,1478849147.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:47.812Z,1478849147.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:47.833Z,1478849147.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:48.205Z,1478849148.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:48.241Z,1478849148.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:48.616Z,1478849148.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:48.632Z,1478849148.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:49.020Z,1478849149.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:49.089Z,1478849149.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:49.413Z,1478849149.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:49.445Z,1478849149.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:49.805Z,1478849149.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:49.837Z,1478849149.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:50.205Z,1478849150.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:50.241Z,1478849150.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:50.605Z,1478849150.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:50.643Z,1478849150.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:50.666Z,1478849150.666 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T07:25:51.017Z,1478849151.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:51.085Z,1478849151.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:51.413Z,1478849151.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:51.444Z,1478849151.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:51.805Z,1478849151.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:51.825Z,1478849151.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:52.209Z,1478849152.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:52.225Z,1478849152.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:52.609Z,1478849152.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:52.624Z,1478849152.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:53.058Z,1478849153.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:53.105Z,1478849153.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:53.405Z,1478849153.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:53.445Z,1478849153.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:53.806Z,1478849153.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:53.845Z,1478849153.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:54.214Z,1478849154.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:54.229Z,1478849154.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:54.612Z,1478849154.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:54.628Z,1478849154.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:55.010Z,1478849155.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:55.071Z,1478849155.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:55.417Z,1478849155.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:55.445Z,1478849155.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:55.805Z,1478849155.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:55.843Z,1478849155.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:56.209Z,1478849156.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:56.242Z,1478849156.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:56.605Z,1478849156.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:56.681Z,1478849156.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:57.012Z,1478849157.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:57.027Z,1478849157.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:57.417Z,1478849157.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:57.477Z,1478849157.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:57.805Z,1478849157.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:57.837Z,1478849157.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:58.205Z,1478849158.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:58.269Z,1478849158.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:58.609Z,1478849158.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:58.665Z,1478849158.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:59.009Z,1478849159.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:59.024Z,1478849159.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:59.416Z,1478849159.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:59.460Z,1478849159.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:25:59.816Z,1478849159.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:25:59.837Z,1478849159.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:00.205Z,1478849160.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:00.230Z,1478849160.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:00.605Z,1478849160.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:00.640Z,1478849160.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:01.009Z,1478849161.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:01.045Z,1478849161.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:01.408Z,1478849161.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:01.466Z,1478849161.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:01.805Z,1478849161.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:01.821Z,1478849161.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:02.205Z,1478849162.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:02.221Z,1478849162.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:02.605Z,1478849162.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:02.625Z,1478849162.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:03.038Z,1478849163.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:03.072Z,1478849163.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:06.408Z,1478849166.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:06.424Z,1478849166.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:06.529Z,1478849166.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:06.566Z,1478849166.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:06.904Z,1478849166.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:06.920Z,1478849166.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:07.308Z,1478849167.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:07.335Z,1478849167.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:07.697Z,1478849167.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:07.733Z,1478849167.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:08.105Z,1478849168.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:08.131Z,1478849168.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:08.497Z,1478849168.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:08.533Z,1478849168.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:08.897Z,1478849168.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:09.005Z,1478849169.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:09.313Z,1478849169.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:09.340Z,1478849169.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:09.703Z,1478849169.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:09.726Z,1478849169.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:10.104Z,1478849170.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:10.167Z,1478849170.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:10.509Z,1478849170.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:10.530Z,1478849170.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:10.897Z,1478849170.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:10.962Z,1478849170.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:11.297Z,1478849171.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:11.345Z,1478849171.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:11.697Z,1478849171.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:11.733Z,1478849171.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:12.097Z,1478849172.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:12.133Z,1478849172.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:12.497Z,1478849172.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:12.533Z,1478849172.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:12.905Z,1478849172.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:12.930Z,1478849172.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:13.297Z,1478849173.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:13.373Z,1478849173.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:13.697Z,1478849173.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:13.737Z,1478849173.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:14.109Z,1478849174.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:14.144Z,1478849174.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:14.503Z,1478849174.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:14.518Z,1478849174.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:14.908Z,1478849174.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:14.924Z,1478849174.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:15.305Z,1478849175.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:15.393Z,1478849175.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:15.703Z,1478849175.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:15.725Z,1478849175.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:16.104Z,1478849176.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:16.120Z,1478849176.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:16.507Z,1478849176.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:16.530Z,1478849176.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:16.904Z,1478849176.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:16.993Z,1478849176.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:17.297Z,1478849177.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:17.320Z,1478849177.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:17.697Z,1478849177.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:17.734Z,1478849177.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:18.101Z,1478849178.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:18.116Z,1478849178.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:18.498Z,1478849178.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:18.517Z,1478849178.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:18.897Z,1478849178.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:18.913Z,1478849178.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:19.305Z,1478849179.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:19.325Z,1478849179.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:19.701Z,1478849179.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:19.725Z,1478849179.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:20.104Z,1478849180.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:20.123Z,1478849180.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:20.500Z,1478849180.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:20.527Z,1478849180.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:20.908Z,1478849180.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:20.929Z,1478849180.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:21.297Z,1478849181.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:21.333Z,1478849181.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:21.697Z,1478849181.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:21.737Z,1478849181.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:22.097Z,1478849182.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:22.146Z,1478849182.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:22.497Z,1478849182.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:22.517Z,1478849182.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:22.904Z,1478849182.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:22.919Z,1478849182.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:23.305Z,1478849183.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:23.360Z,1478849183.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:23.708Z,1478849183.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:23.730Z,1478849183.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:24.097Z,1478849184.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:24.147Z,1478849184.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:24.497Z,1478849184.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:24.554Z,1478849184.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:24.897Z,1478849184.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:24.930Z,1478849184.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:25.297Z,1478849185.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:25.321Z,1478849185.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:25.704Z,1478849185.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:25.719Z,1478849185.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:26.104Z,1478849186.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:26.119Z,1478849186.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:26.505Z,1478849186.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:26.525Z,1478849186.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:26.905Z,1478849186.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:26.921Z,1478849186.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:27.309Z,1478849187.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:27.370Z,1478849187.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:27.708Z,1478849187.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:27.736Z,1478849187.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:28.097Z,1478849188.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:28.129Z,1478849188.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:28.497Z,1478849188.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:28.530Z,1478849188.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:28.897Z,1478849188.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:28.930Z,1478849188.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:29.313Z,1478849189.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:29.367Z,1478849189.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:29.697Z,1478849189.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:29.740Z,1478849189.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:30.097Z,1478849190.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:30.141Z,1478849190.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:30.497Z,1478849190.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:30.512Z,1478849190.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:30.897Z,1478849190.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:30.917Z,1478849190.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:31.300Z,1478849191.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:31.329Z,1478849191.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:31.700Z,1478849191.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:31.723Z,1478849191.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:32.104Z,1478849192.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:32.125Z,1478849192.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:32.500Z,1478849192.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:32.523Z,1478849192.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:32.905Z,1478849192.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:32.920Z,1478849192.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:33.297Z,1478849193.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:33.329Z,1478849193.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:33.697Z,1478849193.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:33.740Z,1478849193.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:34.097Z,1478849194.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:34.129Z,1478849194.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:34.497Z,1478849194.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:34.522Z,1478849194.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:34.901Z,1478849194.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:34.988Z,1478849194.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:35.297Z,1478849195.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:35.353Z,1478849195.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:35.697Z,1478849195.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:35.740Z,1478849195.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:36.097Z,1478849196.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:36.113Z,1478849196.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:36.497Z,1478849196.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:36.553Z,1478849196.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:36.897Z,1478849196.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:36.961Z,1478849196.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:37.301Z,1478849197.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:37.333Z,1478849197.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:37.697Z,1478849197.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:37.742Z,1478849197.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:38.097Z,1478849198.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:38.126Z,1478849198.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:38.497Z,1478849198.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:38.553Z,1478849198.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:38.897Z,1478849198.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:38.950Z,1478849198.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:39.304Z,1478849199.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:39.319Z,1478849199.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:39.701Z,1478849199.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:39.721Z,1478849199.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:40.104Z,1478849200.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:40.120Z,1478849200.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:40.504Z,1478849200.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:40.518Z,1478849200.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:40.909Z,1478849200.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:40.924Z,1478849200.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:41.354Z,1478849201.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:41.385Z,1478849201.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:41.697Z,1478849201.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:41.726Z,1478849201.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:42.104Z,1478849202.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:42.127Z,1478849202.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:42.497Z,1478849202.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:42.525Z,1478849202.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:42.897Z,1478849202.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:42.925Z,1478849202.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:43.333Z,1478849203.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:43.386Z,1478849203.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:43.697Z,1478849203.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:43.724Z,1478849203.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:44.097Z,1478849204.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:44.132Z,1478849204.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:44.501Z,1478849204.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:44.533Z,1478849204.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:44.897Z,1478849204.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:44.972Z,1478849204.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:45.304Z,1478849205.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:45.319Z,1478849205.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:45.699Z,1478849205.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:45.730Z,1478849205.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:46.104Z,1478849206.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:46.121Z,1478849206.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:46.504Z,1478849206.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:46.525Z,1478849206.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:46.936Z,1478849206.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:46.990Z,1478849206.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:47.301Z,1478849207.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:47.332Z,1478849207.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:47.697Z,1478849207.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:47.741Z,1478849207.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:48.097Z,1478849208.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:48.133Z,1478849208.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:48.502Z,1478849208.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:48.518Z,1478849208.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:48.909Z,1478849208.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:48.986Z,1478849208.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:49.305Z,1478849209.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:49.320Z,1478849209.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:49.703Z,1478849209.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:49.753Z,1478849209.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:50.104Z,1478849210.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:50.125Z,1478849210.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:50.508Z,1478849210.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:50.523Z,1478849210.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:50.905Z,1478849210.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:50.971Z,1478849210.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:51.297Z,1478849211.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:51.365Z,1478849211.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:51.705Z,1478849211.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:51.730Z,1478849211.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:52.097Z,1478849212.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:52.145Z,1478849212.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:52.497Z,1478849212.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:52.533Z,1478849212.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:52.897Z,1478849212.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:52.961Z,1478849212.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:53.300Z,1478849213.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:53.326Z,1478849213.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:53.704Z,1478849213.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:53.755Z,1478849213.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:54.104Z,1478849214.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:54.119Z,1478849214.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:54.504Z,1478849214.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:54.520Z,1478849214.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:54.906Z,1478849214.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:54.925Z,1478849214.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:55.311Z,1478849215.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:55.361Z,1478849215.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:55.697Z,1478849215.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:55.729Z,1478849215.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:56.097Z,1478849216.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:56.132Z,1478849216.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:56.508Z,1478849216.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:56.540Z,1478849216.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:56.897Z,1478849216.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:56.924Z,1478849216.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:57.305Z,1478849217.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:57.345Z,1478849217.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:57.698Z,1478849217.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:57.733Z,1478849217.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:58.105Z,1478849218.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:58.120Z,1478849218.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:58.506Z,1478849218.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:58.525Z,1478849218.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:58.920Z,1478849218.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:58.962Z,1478849218.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:59.297Z,1478849219.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:59.334Z,1478849219.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:26:59.697Z,1478849219.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:26:59.734Z,1478849219.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:00.097Z,1478849220.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:00.126Z,1478849220.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:00.497Z,1478849220.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:00.538Z,1478849220.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:00.952Z,1478849220.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:00.987Z,1478849220.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:01.304Z,1478849221.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:01.320Z,1478849221.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:01.709Z,1478849221.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:01.747Z,1478849221.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:02.104Z,1478849222.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:02.125Z,1478849222.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:02.500Z,1478849222.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:02.532Z,1478849222.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:02.549Z,1478849222.549 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T07:27:02.550Z,1478849222.550 [Default:CheckIn:C.Wait] Stopped
2016-11-11T07:27:02.550Z,1478849222.550 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T07:27:02.550Z,1478849222.550 [Default:CheckIn:D] Running Loop=1
2016-11-11T07:27:02.926Z,1478849222.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:02.976Z,1478849222.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:02.989Z,1478849222.989 [Default:CheckIn:D] Stopped
2016-11-11T07:27:02.989Z,1478849222.989 [Default:CheckIn:E] Running Loop=1
2016-11-11T07:27:03.297Z,1478849223.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:03.333Z,1478849223.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:03.343Z,1478849223.343 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 157.027979 min 
2016-11-11T07:27:03.343Z,1478849223.343 [Default:CheckIn:E] Stopped
2016-11-11T07:27:03.343Z,1478849223.343 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T07:27:03.343Z,1478849223.343 [Default:CheckIn] Stopped
2016-11-11T07:27:03.343Z,1478849223.343 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T07:27:03.344Z,1478849223.344 [Default:CheckIn](INFO): Running loop #16
2016-11-11T07:27:03.344Z,1478849223.344 [Default:CheckIn] Running Loop=16
2016-11-11T07:27:03.344Z,1478849223.344 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T07:27:03.344Z,1478849223.344 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T07:27:06.658Z,1478849226.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:06.742Z,1478849226.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:06.836Z,1478849226.836 [NAL9602](INFO): Powering up
2016-11-11T07:27:06.854Z,1478849226.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:06.890Z,1478849226.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:07.225Z,1478849227.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:07.248Z,1478849227.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:07.609Z,1478849227.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:07.650Z,1478849227.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:08.015Z,1478849228.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:08.030Z,1478849228.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:08.416Z,1478849228.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:08.467Z,1478849228.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:08.816Z,1478849228.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:08.867Z,1478849228.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:09.219Z,1478849229.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:09.296Z,1478849229.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:09.609Z,1478849229.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:09.643Z,1478849229.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:10.009Z,1478849230.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:10.043Z,1478849230.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:10.409Z,1478849230.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:10.435Z,1478849230.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:10.809Z,1478849230.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:10.843Z,1478849230.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:11.212Z,1478849231.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:11.294Z,1478849231.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:11.609Z,1478849231.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:11.633Z,1478849231.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:12.009Z,1478849232.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:12.041Z,1478849232.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:12.416Z,1478849232.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:12.453Z,1478849232.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:12.806Z,1478849232.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:12.839Z,1478849232.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:13.209Z,1478849233.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:13.242Z,1478849233.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:13.624Z,1478849233.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:13.645Z,1478849233.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:14.009Z,1478849234.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:14.042Z,1478849234.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:14.409Z,1478849234.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:14.443Z,1478849234.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:14.813Z,1478849234.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:14.845Z,1478849234.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:15.214Z,1478849235.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:15.230Z,1478849235.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:15.609Z,1478849235.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:15.637Z,1478849235.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:16.011Z,1478849236.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:16.044Z,1478849236.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:16.416Z,1478849236.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:16.431Z,1478849236.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:16.816Z,1478849236.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:16.837Z,1478849236.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:17.217Z,1478849237.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:17.250Z,1478849237.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:17.628Z,1478849237.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:17.644Z,1478849237.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:17.993Z,1478849237.993 [NAL9602](INFO): NAL9602 initialized
2016-11-11T07:27:18.009Z,1478849238.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:18.049Z,1478849238.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:18.414Z,1478849238.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:18.441Z,1478849238.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:18.835Z,1478849238.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:18.912Z,1478849238.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:19.224Z,1478849239.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:19.249Z,1478849239.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:19.638Z,1478849239.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:19.654Z,1478849239.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:20.013Z,1478849240.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:20.061Z,1478849240.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:20.416Z,1478849240.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:20.431Z,1478849240.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:20.812Z,1478849240.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:20.830Z,1478849240.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:21.220Z,1478849241.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:21.269Z,1478849241.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:21.628Z,1478849241.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:21.661Z,1478849241.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:22.024Z,1478849242.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:22.060Z,1478849242.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:22.409Z,1478849242.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:22.429Z,1478849242.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:22.814Z,1478849242.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:22.858Z,1478849242.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:23.222Z,1478849243.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:23.266Z,1478849243.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:23.609Z,1478849243.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:23.665Z,1478849243.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:24.009Z,1478849244.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:24.058Z,1478849244.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:24.414Z,1478849244.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:24.441Z,1478849244.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:24.812Z,1478849244.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:24.841Z,1478849244.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:25.217Z,1478849245.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:25.273Z,1478849245.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:25.614Z,1478849245.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:25.629Z,1478849245.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:26.024Z,1478849246.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:26.039Z,1478849246.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:26.423Z,1478849246.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:26.445Z,1478849246.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:26.823Z,1478849246.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:26.873Z,1478849246.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:27.221Z,1478849247.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:27.248Z,1478849247.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:27.622Z,1478849247.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:27.637Z,1478849247.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:28.018Z,1478849248.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:28.033Z,1478849248.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:28.412Z,1478849248.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:28.440Z,1478849248.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:28.816Z,1478849248.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:28.889Z,1478849248.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:29.209Z,1478849249.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:29.245Z,1478849249.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:29.621Z,1478849249.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:29.644Z,1478849249.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:30.009Z,1478849250.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:30.049Z,1478849250.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:30.409Z,1478849250.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:30.442Z,1478849250.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:30.812Z,1478849250.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:30.904Z,1478849250.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:31.224Z,1478849251.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:31.254Z,1478849251.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:31.624Z,1478849251.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:31.653Z,1478849251.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:32.028Z,1478849252.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:32.054Z,1478849252.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:32.420Z,1478849252.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:32.452Z,1478849252.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:32.816Z,1478849252.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:32.882Z,1478849252.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:33.212Z,1478849253.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:33.245Z,1478849253.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:33.624Z,1478849253.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:33.639Z,1478849253.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:34.020Z,1478849254.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:34.044Z,1478849254.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:34.409Z,1478849254.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:34.441Z,1478849254.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:34.809Z,1478849254.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:34.872Z,1478849254.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:35.209Z,1478849255.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:35.242Z,1478849255.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:35.617Z,1478849255.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:35.649Z,1478849255.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:36.010Z,1478849256.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:36.065Z,1478849256.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:36.432Z,1478849256.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:36.447Z,1478849256.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:36.820Z,1478849256.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:36.886Z,1478849256.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:37.254Z,1478849257.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:37.297Z,1478849257.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:37.624Z,1478849257.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:37.669Z,1478849257.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:38.013Z,1478849258.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:38.069Z,1478849258.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:38.412Z,1478849258.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:38.433Z,1478849258.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:38.813Z,1478849258.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:38.828Z,1478849258.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:39.234Z,1478849259.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:39.278Z,1478849259.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:39.617Z,1478849259.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:39.637Z,1478849259.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:40.016Z,1478849260.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:40.031Z,1478849260.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:40.412Z,1478849260.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:40.445Z,1478849260.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:40.816Z,1478849260.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:40.920Z,1478849260.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:41.217Z,1478849261.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:41.232Z,1478849261.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:41.628Z,1478849261.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:41.643Z,1478849261.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:42.027Z,1478849262.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:42.042Z,1478849262.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:42.432Z,1478849262.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:42.447Z,1478849262.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:42.849Z,1478849262.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:42.894Z,1478849262.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:43.209Z,1478849263.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:43.229Z,1478849263.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:43.613Z,1478849263.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:43.633Z,1478849263.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:44.012Z,1478849264.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:44.027Z,1478849264.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:44.412Z,1478849264.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:44.433Z,1478849264.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:44.836Z,1478849264.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:44.908Z,1478849264.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:45.217Z,1478849265.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:45.237Z,1478849265.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:45.616Z,1478849265.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:45.631Z,1478849265.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:46.017Z,1478849266.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:46.041Z,1478849266.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:46.421Z,1478849266.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:46.441Z,1478849266.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:46.849Z,1478849266.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:46.900Z,1478849266.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:47.224Z,1478849267.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:47.259Z,1478849267.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:47.636Z,1478849267.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:47.652Z,1478849267.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:48.024Z,1478849268.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:48.053Z,1478849268.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:48.414Z,1478849268.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:48.449Z,1478849268.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:48.813Z,1478849268.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:48.910Z,1478849268.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:49.212Z,1478849269.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:49.235Z,1478849269.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:49.617Z,1478849269.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:49.632Z,1478849269.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:50.020Z,1478849270.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:50.081Z,1478849270.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:50.409Z,1478849270.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:50.441Z,1478849270.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:50.809Z,1478849270.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:50.844Z,1478849270.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:51.238Z,1478849271.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:51.304Z,1478849271.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:51.609Z,1478849271.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:51.637Z,1478849271.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:52.033Z,1478849272.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:52.086Z,1478849272.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:52.432Z,1478849272.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:52.490Z,1478849272.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:52.833Z,1478849272.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:52.854Z,1478849272.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:53.259Z,1478849273.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:53.293Z,1478849273.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:53.617Z,1478849273.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:53.649Z,1478849273.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:54.021Z,1478849274.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:54.051Z,1478849274.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:54.416Z,1478849274.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:54.443Z,1478849274.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:54.857Z,1478849274.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:54.900Z,1478849274.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:55.215Z,1478849275.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:55.231Z,1478849275.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:55.617Z,1478849275.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:55.632Z,1478849275.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:56.021Z,1478849276.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:56.036Z,1478849276.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:56.409Z,1478849276.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:56.435Z,1478849276.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:56.822Z,1478849276.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:56.871Z,1478849276.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:57.224Z,1478849277.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:57.250Z,1478849277.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:57.628Z,1478849277.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:57.653Z,1478849277.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:58.023Z,1478849278.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:58.052Z,1478849278.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:58.424Z,1478849278.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:58.459Z,1478849278.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:58.853Z,1478849278.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:58.871Z,1478849278.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:59.211Z,1478849279.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:59.256Z,1478849279.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:27:59.620Z,1478849279.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:27:59.636Z,1478849279.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:00.018Z,1478849280.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:00.042Z,1478849280.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:00.420Z,1478849280.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:00.457Z,1478849280.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:00.886Z,1478849280.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:00.935Z,1478849280.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:01.218Z,1478849281.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:01.250Z,1478849281.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:01.611Z,1478849281.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:01.653Z,1478849281.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:02.011Z,1478849282.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:02.083Z,1478849282.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:02.425Z,1478849282.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:02.457Z,1478849282.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:02.826Z,1478849282.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:02.891Z,1478849282.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:03.226Z,1478849283.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:03.275Z,1478849283.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:03.623Z,1478849283.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:03.659Z,1478849283.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:09.428Z,1478849289.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:09.475Z,1478849289.475 [BPC1](ERROR): Failed to receive battery data
2016-11-11T07:28:09.475Z,1478849289.475 [BPC1] Communications Fault, FailCount= 1
2016-11-11T07:28:09.475Z,1478849289.475 [BPC1](ERROR): Communications Fault
2016-11-11T07:28:09.493Z,1478849289.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:09.539Z,1478849289.539 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T07:28:09.592Z,1478849289.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:09.625Z,1478849289.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:09.988Z,1478849289.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:10.003Z,1478849290.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:10.388Z,1478849290.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:10.409Z,1478849290.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:10.468Z,1478849290.468 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:28:10.469Z,1478849290.469 [BPC1] No Fault, FailCount= 1
2016-11-11T07:28:10.798Z,1478849290.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:10.955Z,1478849290.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:11.173Z,1478849291.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:11.205Z,1478849291.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:11.573Z,1478849291.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:11.625Z,1478849291.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:11.974Z,1478849291.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:12.005Z,1478849292.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:12.372Z,1478849292.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:12.405Z,1478849292.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:12.781Z,1478849292.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:12.839Z,1478849292.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:13.182Z,1478849293.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:13.198Z,1478849293.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:13.581Z,1478849293.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:13.597Z,1478849293.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:13.981Z,1478849293.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:13.996Z,1478849293.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:14.388Z,1478849294.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:14.413Z,1478849294.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:14.817Z,1478849294.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:14.865Z,1478849294.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:15.196Z,1478849295.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:15.217Z,1478849295.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:15.592Z,1478849295.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:15.607Z,1478849295.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:15.975Z,1478849295.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:16.005Z,1478849296.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:16.373Z,1478849296.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:16.399Z,1478849296.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:16.778Z,1478849296.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:16.813Z,1478849296.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:17.181Z,1478849297.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:17.213Z,1478849297.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:17.573Z,1478849297.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:17.617Z,1478849297.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:17.974Z,1478849297.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:18.013Z,1478849298.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:18.378Z,1478849298.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:18.393Z,1478849298.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:18.774Z,1478849298.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:18.813Z,1478849298.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:19.181Z,1478849299.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:19.218Z,1478849299.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:19.596Z,1478849299.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:19.616Z,1478849299.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:19.997Z,1478849299.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:20.026Z,1478849300.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:20.400Z,1478849300.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:20.416Z,1478849300.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:20.784Z,1478849300.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:20.811Z,1478849300.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:21.181Z,1478849301.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:21.218Z,1478849301.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:21.584Z,1478849301.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:21.632Z,1478849301.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:21.982Z,1478849301.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:22.004Z,1478849302.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:22.376Z,1478849302.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:22.421Z,1478849302.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:22.844Z,1478849302.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:22.888Z,1478849302.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:23.184Z,1478849303.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:23.233Z,1478849303.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:23.580Z,1478849303.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:23.654Z,1478849303.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:23.974Z,1478849303.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:24.018Z,1478849304.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:24.387Z,1478849304.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:24.459Z,1478849304.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:24.811Z,1478849304.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:24.858Z,1478849304.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:25.184Z,1478849305.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:25.229Z,1478849305.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:25.597Z,1478849305.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:25.650Z,1478849305.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:25.999Z,1478849305.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:26.046Z,1478849306.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:26.375Z,1478849306.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:26.409Z,1478849306.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:26.785Z,1478849306.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:26.859Z,1478849306.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:27.174Z,1478849307.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:27.189Z,1478849307.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:27.588Z,1478849307.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:27.633Z,1478849307.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:27.984Z,1478849307.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:28.029Z,1478849308.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:28.380Z,1478849308.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:28.417Z,1478849308.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:28.797Z,1478849308.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:28.831Z,1478849308.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:29.174Z,1478849309.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:29.210Z,1478849309.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:29.575Z,1478849309.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:29.622Z,1478849309.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:30.002Z,1478849310.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:30.038Z,1478849310.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:30.384Z,1478849310.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:30.418Z,1478849310.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:30.789Z,1478849310.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:30.866Z,1478849310.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:31.185Z,1478849311.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:31.211Z,1478849311.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:31.585Z,1478849311.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:31.613Z,1478849311.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:31.978Z,1478849311.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:31.997Z,1478849311.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:32.378Z,1478849312.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:32.394Z,1478849312.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:32.781Z,1478849312.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:32.798Z,1478849312.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:33.198Z,1478849313.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:33.240Z,1478849313.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:33.573Z,1478849313.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:33.605Z,1478849313.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:33.973Z,1478849313.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:33.000Z,1478849314.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:34.373Z,1478849314.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:34.410Z,1478849314.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:34.785Z,1478849314.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:34.805Z,1478849314.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:35.192Z,1478849315.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:35.208Z,1478849315.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:35.588Z,1478849315.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:35.613Z,1478849315.613 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:35.613Z,1478849315.613 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2016-11-11T07:28:35.613Z,1478849315.613 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:28:35.622Z,1478849315.622 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:35.623Z,1478849315.622 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 34
2016-11-11T07:28:35.623Z,1478849315.623 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:28:35.654Z,1478849315.654 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:28:35.654Z,1478849315.654 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:28:35.988Z,1478849315.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:36.027Z,1478849316.027 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:28:36.027Z,1478849316.027 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2016-11-11T07:28:36.028Z,1478849316.028 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:28:36.028Z,1478849316.028 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 34
2016-11-11T07:28:36.384Z,1478849316.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:36.398Z,1478849316.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:28:36.399Z,1478849316.399 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:28:36.399Z,1478849316.399 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:28:36.404Z,1478849316.404 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:28:36.404Z,1478849316.404 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:28:36.405Z,1478849316.405 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:28:36.803Z,1478849316.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:36.831Z,1478849316.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:37.178Z,1478849317.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:37.237Z,1478849317.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:37.578Z,1478849317.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:37.621Z,1478849317.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:37.978Z,1478849317.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:37.993Z,1478849317.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:38.373Z,1478849318.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:38.422Z,1478849318.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:38.429Z,1478849318.429 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:38.429Z,1478849318.429 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 34
2016-11-11T07:28:38.429Z,1478849318.429 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:28:38.444Z,1478849318.444 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:28:38.784Z,1478849318.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:38.803Z,1478849318.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:38.822Z,1478849318.822 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:28:38.822Z,1478849318.822 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 34
2016-11-11T07:28:39.185Z,1478849319.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:39.226Z,1478849319.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:39.232Z,1478849319.232 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:28:39.233Z,1478849319.233 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:28:39.233Z,1478849319.233 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:28:39.577Z,1478849319.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:39.625Z,1478849319.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:39.977Z,1478849319.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:39.998Z,1478849319.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:40.392Z,1478849320.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:40.409Z,1478849320.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:40.799Z,1478849320.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:40.827Z,1478849320.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:41.192Z,1478849321.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:41.208Z,1478849321.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:41.587Z,1478849321.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:41.602Z,1478849321.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:41.977Z,1478849321.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:41.993Z,1478849321.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:42.394Z,1478849322.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:42.410Z,1478849322.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:42.783Z,1478849322.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:42.799Z,1478849322.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:43.177Z,1478849323.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:43.194Z,1478849323.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:43.577Z,1478849323.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:43.593Z,1478849323.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:43.977Z,1478849323.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:43.993Z,1478849323.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:44.377Z,1478849324.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:44.397Z,1478849324.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:44.778Z,1478849324.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:44.802Z,1478849324.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:45.174Z,1478849325.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:45.189Z,1478849325.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:45.593Z,1478849325.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:45.608Z,1478849325.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:45.988Z,1478849325.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:46.009Z,1478849326.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:46.377Z,1478849326.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:46.394Z,1478849326.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:46.774Z,1478849326.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:46.794Z,1478849326.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:47.178Z,1478849327.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:47.193Z,1478849327.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:47.574Z,1478849327.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:47.589Z,1478849327.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:47.978Z,1478849327.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:47.994Z,1478849327.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:48.377Z,1478849328.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:48.393Z,1478849328.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:48.792Z,1478849328.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:48.807Z,1478849328.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:49.188Z,1478849329.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:49.209Z,1478849329.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:49.592Z,1478849329.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:49.608Z,1478849329.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:49.988Z,1478849329.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:50.003Z,1478849330.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:50.374Z,1478849330.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:50.389Z,1478849330.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:50.781Z,1478849330.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:50.797Z,1478849330.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:51.181Z,1478849331.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:51.234Z,1478849331.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:51.571Z,1478849331.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:51.586Z,1478849331.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:51.975Z,1478849331.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:51.998Z,1478849331.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:52.373Z,1478849332.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:52.414Z,1478849332.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:52.783Z,1478849332.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:52.798Z,1478849332.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:53.177Z,1478849333.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:53.225Z,1478849333.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:53.578Z,1478849333.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:53.625Z,1478849333.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:53.992Z,1478849333.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:54.007Z,1478849334.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:54.384Z,1478849334.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:54.400Z,1478849334.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:54.792Z,1478849334.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:54.807Z,1478849334.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:55.188Z,1478849335.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:55.209Z,1478849335.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:55.574Z,1478849335.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:55.600Z,1478849335.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:55.977Z,1478849335.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:55.992Z,1478849335.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:56.371Z,1478849336.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:56.387Z,1478849336.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:56.779Z,1478849336.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:56.795Z,1478849336.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:57.183Z,1478849337.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:57.213Z,1478849337.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:57.570Z,1478849337.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:57.586Z,1478849337.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:57.977Z,1478849337.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:57.997Z,1478849337.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:58.378Z,1478849338.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:58.393Z,1478849338.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:58.782Z,1478849338.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:58.806Z,1478849338.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:59.190Z,1478849339.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:59.221Z,1478849339.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:59.589Z,1478849339.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:28:59.626Z,1478849339.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:28:59.993Z,1478849339.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:00.021Z,1478849340.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:00.390Z,1478849340.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:00.417Z,1478849340.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:00.774Z,1478849340.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:00.805Z,1478849340.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:01.174Z,1478849341.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:01.206Z,1478849341.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:01.574Z,1478849341.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:01.611Z,1478849341.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:01.974Z,1478849341.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:01.993Z,1478849341.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:02.374Z,1478849342.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:02.394Z,1478849342.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:02.774Z,1478849342.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:02.794Z,1478849342.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:03.174Z,1478849343.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:03.209Z,1478849343.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:03.574Z,1478849343.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:03.594Z,1478849343.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:03.974Z,1478849343.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:04.004Z,1478849344.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:08.192Z,1478849348.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:08.302Z,1478849348.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:08.433Z,1478849348.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:08.469Z,1478849348.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:08.850Z,1478849348.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:08.881Z,1478849348.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:09.230Z,1478849349.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:09.289Z,1478849349.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:09.609Z,1478849349.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:09.645Z,1478849349.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:10.013Z,1478849350.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:10.073Z,1478849350.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:10.406Z,1478849350.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:10.458Z,1478849350.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:10.805Z,1478849350.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:10.845Z,1478849350.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:11.210Z,1478849351.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:11.239Z,1478849351.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:11.605Z,1478849351.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:11.653Z,1478849351.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:12.006Z,1478849352.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:12.039Z,1478849352.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:12.414Z,1478849352.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:12.444Z,1478849352.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:12.813Z,1478849352.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:12.865Z,1478849352.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:13.216Z,1478849353.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:13.250Z,1478849353.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:13.616Z,1478849353.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:13.647Z,1478849353.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:13.647Z,1478849353.647 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T07:29:13.647Z,1478849353.647 [Rowe_600LCM] Communications Fault, FailCount= 4
2016-11-11T07:29:13.647Z,1478849353.647 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T07:29:13.669Z,1478849353.668 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T07:29:14.021Z,1478849354.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:14.042Z,1478849354.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T07:29:14.043Z,1478849354.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:14.051Z,1478849354.051 [Rowe_600LCM](INFO): Powering down
2016-11-11T07:29:14.418Z,1478849354.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:14.449Z,1478849354.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T07:29:14.450Z,1478849354.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:14.845Z,1478849354.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:14.861Z,1478849354.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:29:14.862Z,1478849354.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:15.213Z,1478849355.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:15.252Z,1478849355.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:29:15.253Z,1478849355.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:15.273Z,1478849355.273 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T07:29:15.273Z,1478849355.273 [Rowe_600LCM] No Fault, FailCount= 4
2016-11-11T07:29:15.610Z,1478849355.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:15.629Z,1478849355.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:29:15.630Z,1478849355.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:15.667Z,1478849355.667 [Rowe_600LCM](INFO): Initializing
2016-11-11T07:29:15.669Z,1478849355.668 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T07:29:15.669Z,1478849355.669 [Rowe_600LCM](INFO): LCM OK
2016-11-11T07:29:15.669Z,1478849355.669 [Rowe_600LCM](INFO): Powering up
2016-11-11T07:29:16.012Z,1478849356.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:16.026Z,1478849356.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:29:16.028Z,1478849356.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:16.412Z,1478849356.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:16.441Z,1478849356.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:29:16.442Z,1478849356.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:16.812Z,1478849356.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:16.836Z,1478849356.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:29:16.837Z,1478849356.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:17.208Z,1478849357.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:17.237Z,1478849357.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:29:17.238Z,1478849357.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:17.612Z,1478849357.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:17.679Z,1478849357.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:29:17.680Z,1478849357.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:18.006Z,1478849358.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:18.044Z,1478849358.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:29:18.045Z,1478849358.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:18.440Z,1478849358.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:18.454Z,1478849358.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:29:18.456Z,1478849358.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:18.835Z,1478849358.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:18.849Z,1478849358.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:29:18.850Z,1478849358.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:19.221Z,1478849359.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:19.253Z,1478849359.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:29:19.254Z,1478849359.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:19.621Z,1478849359.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:19.649Z,1478849359.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:29:19.650Z,1478849359.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:19.820Z,1478849359.820 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T07:29:19.882Z,1478849359.882 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T07:29:19.884Z,1478849359.884 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T07:29:19.885Z,1478849359.885 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T07:29:19.886Z,1478849359.886 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T07:29:20.012Z,1478849360.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:20.021Z,1478849360.021 [PNI_TCM](ERROR): CRC does not match. Expected:0x52713 got:0x417
2016-11-11T07:29:20.070Z,1478849360.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:29:20.071Z,1478849360.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:20.418Z,1478849360.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:20.425Z,1478849360.425 [PNI_TCM](ERROR): CRC does not match. Expected:0x11475 got:0x7361
2016-11-11T07:29:20.466Z,1478849360.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:20.825Z,1478849360.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:20.850Z,1478849360.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:21.213Z,1478849361.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:21.242Z,1478849361.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:21.610Z,1478849361.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:21.637Z,1478849361.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:22.010Z,1478849362.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:22.066Z,1478849362.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:22.408Z,1478849362.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:22.477Z,1478849362.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:22.812Z,1478849362.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:22.860Z,1478849362.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:23.213Z,1478849363.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:23.269Z,1478849363.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:23.622Z,1478849363.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:23.638Z,1478849363.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:24.020Z,1478849364.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:24.066Z,1478849364.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:24.428Z,1478849364.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:24.474Z,1478849364.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:24.830Z,1478849364.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:24.885Z,1478849364.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:25.208Z,1478849365.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:25.235Z,1478849365.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:25.611Z,1478849365.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:25.645Z,1478849365.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:26.010Z,1478849366.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:26.041Z,1478849366.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:26.411Z,1478849366.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:26.439Z,1478849366.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:26.813Z,1478849366.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:26.890Z,1478849366.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:27.215Z,1478849367.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:27.237Z,1478849367.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:27.609Z,1478849367.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:27.638Z,1478849367.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:28.020Z,1478849368.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:28.035Z,1478849368.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:28.417Z,1478849368.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:28.432Z,1478849368.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:28.827Z,1478849368.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:28.843Z,1478849368.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:29.229Z,1478849369.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:29.245Z,1478849369.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:29.631Z,1478849369.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:29.646Z,1478849369.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:30.016Z,1478849370.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:30.053Z,1478849370.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:30.413Z,1478849370.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:30.449Z,1478849370.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:30.810Z,1478849370.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:30.828Z,1478849370.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:31.214Z,1478849371.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:31.229Z,1478849371.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:31.610Z,1478849371.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:31.634Z,1478849371.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:32.009Z,1478849372.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:32.034Z,1478849372.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:32.410Z,1478849372.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:32.443Z,1478849372.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:32.814Z,1478849372.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:32.841Z,1478849372.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:33.208Z,1478849373.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:33.241Z,1478849373.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:33.610Z,1478849373.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:33.641Z,1478849373.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:34.032Z,1478849374.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:34.060Z,1478849374.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:34.424Z,1478849374.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:34.450Z,1478849374.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:34.825Z,1478849374.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:34.857Z,1478849374.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:35.216Z,1478849375.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:35.249Z,1478849375.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:35.611Z,1478849375.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:35.633Z,1478849375.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:36.019Z,1478849376.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:36.038Z,1478849376.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:36.417Z,1478849376.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:36.497Z,1478849376.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:36.820Z,1478849376.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:36.842Z,1478849376.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:37.207Z,1478849377.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:37.273Z,1478849377.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:37.608Z,1478849377.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:37.658Z,1478849377.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:38.005Z,1478849378.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:38.053Z,1478849378.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:38.405Z,1478849378.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:38.453Z,1478849378.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:38.807Z,1478849378.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:38.841Z,1478849378.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:39.233Z,1478849379.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:39.248Z,1478849379.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:39.616Z,1478849379.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:39.653Z,1478849379.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:40.036Z,1478849380.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:40.051Z,1478849380.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:40.420Z,1478849380.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:40.461Z,1478849380.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:40.807Z,1478849380.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:40.823Z,1478849380.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:41.210Z,1478849381.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:41.225Z,1478849381.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:41.610Z,1478849381.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:41.633Z,1478849381.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:42.037Z,1478849382.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:42.088Z,1478849382.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:42.416Z,1478849382.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:42.433Z,1478849382.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:42.500Z,1478849382.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:42.816Z,1478849382.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:42.837Z,1478849382.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:43.205Z,1478849383.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:43.240Z,1478849383.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:43.296Z,1478849383.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:43.615Z,1478849383.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:43.637Z,1478849383.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:44.053Z,1478849384.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:44.081Z,1478849384.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:44.428Z,1478849384.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:44.443Z,1478849384.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:44.824Z,1478849384.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:44.849Z,1478849384.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:45.228Z,1478849385.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:45.248Z,1478849385.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:45.616Z,1478849385.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:45.712Z,1478849385.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:46.009Z,1478849386.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:46.032Z,1478849386.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:46.418Z,1478849386.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:46.438Z,1478849386.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:46.809Z,1478849386.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:46.842Z,1478849386.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:47.212Z,1478849387.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:47.229Z,1478849387.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:47.618Z,1478849387.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:47.692Z,1478849387.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:48.009Z,1478849388.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:48.046Z,1478849388.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:48.409Z,1478849388.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:48.441Z,1478849388.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:48.810Z,1478849388.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:48.842Z,1478849388.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:49.206Z,1478849389.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:49.221Z,1478849389.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:49.644Z,1478849389.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:49.698Z,1478849389.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:50.024Z,1478849390.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:50.056Z,1478849390.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:50.420Z,1478849390.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:50.497Z,1478849390.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:50.816Z,1478849390.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:50.856Z,1478849390.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:51.210Z,1478849391.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:51.262Z,1478849391.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:51.612Z,1478849391.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:51.688Z,1478849391.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:52.014Z,1478849392.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:52.065Z,1478849392.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:52.408Z,1478849392.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:52.455Z,1478849392.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:52.808Z,1478849392.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:52.836Z,1478849392.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:53.215Z,1478849393.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:53.237Z,1478849393.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:53.606Z,1478849393.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:53.633Z,1478849393.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:54.005Z,1478849394.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:54.041Z,1478849394.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:54.405Z,1478849394.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:54.433Z,1478849394.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:54.821Z,1478849394.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:54.861Z,1478849394.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:55.221Z,1478849395.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:55.256Z,1478849395.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:55.624Z,1478849395.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:55.659Z,1478849395.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:56.044Z,1478849396.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:56.072Z,1478849396.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:56.413Z,1478849396.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:56.434Z,1478849396.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:56.813Z,1478849396.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:56.842Z,1478849396.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:57.214Z,1478849397.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:57.229Z,1478849397.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:57.608Z,1478849397.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:57.641Z,1478849397.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:58.036Z,1478849398.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:58.076Z,1478849398.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:58.405Z,1478849398.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:58.437Z,1478849398.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:58.805Z,1478849398.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:58.837Z,1478849398.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:59.205Z,1478849399.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:59.239Z,1478849399.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:29:59.641Z,1478849399.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:29:59.692Z,1478849399.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:00.020Z,1478849400.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:00.048Z,1478849400.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:00.437Z,1478849400.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:00.453Z,1478849400.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:00.820Z,1478849400.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:00.851Z,1478849400.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:01.220Z,1478849401.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:01.252Z,1478849401.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:01.625Z,1478849401.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:01.681Z,1478849401.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:02.013Z,1478849402.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:02.032Z,1478849402.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:02.408Z,1478849402.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:02.441Z,1478849402.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:02.809Z,1478849402.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:02.830Z,1478849402.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:03.214Z,1478849403.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:03.229Z,1478849403.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:03.629Z,1478849403.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:03.693Z,1478849403.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:04.005Z,1478849404.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:04.025Z,1478849404.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:07.396Z,1478849407.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:07.488Z,1478849407.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:07.577Z,1478849407.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:07.605Z,1478849407.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:07.991Z,1478849407.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:08.037Z,1478849408.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:08.384Z,1478849408.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:08.411Z,1478849408.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:08.765Z,1478849408.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:08.813Z,1478849408.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:09.168Z,1478849409.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:09.219Z,1478849409.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:09.566Z,1478849409.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:09.593Z,1478849409.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:09.983Z,1478849409.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:10.043Z,1478849410.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:10.361Z,1478849410.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:10.397Z,1478849410.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:10.764Z,1478849410.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:10.791Z,1478849410.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:11.163Z,1478849411.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:11.179Z,1478849411.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:11.565Z,1478849411.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:11.585Z,1478849411.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:11.997Z,1478849411.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:12.026Z,1478849412.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:12.372Z,1478849412.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:12.387Z,1478849412.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:12.772Z,1478849412.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:12.805Z,1478849412.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:13.176Z,1478849413.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:13.217Z,1478849413.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:13.572Z,1478849413.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:13.637Z,1478849413.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:13.968Z,1478849413.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:13.996Z,1478849413.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:14.364Z,1478849414.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:14.403Z,1478849414.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:14.764Z,1478849414.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:14.796Z,1478849414.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:15.161Z,1478849415.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:15.195Z,1478849415.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:15.573Z,1478849415.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:15.644Z,1478849415.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:15.961Z,1478849415.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:16.001Z,1478849416.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:16.366Z,1478849416.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:16.405Z,1478849416.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:16.770Z,1478849416.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:16.820Z,1478849416.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:17.170Z,1478849417.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:17.185Z,1478849417.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:17.586Z,1478849417.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:17.664Z,1478849417.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:17.984Z,1478849417.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:18.020Z,1478849418.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:18.376Z,1478849418.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:18.421Z,1478849418.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:18.776Z,1478849418.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:18.797Z,1478849418.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:19.162Z,1478849419.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:19.193Z,1478849419.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:19.566Z,1478849419.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:19.659Z,1478849419.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:19.965Z,1478849419.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:20.001Z,1478849420.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:20.366Z,1478849420.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:20.382Z,1478849420.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:20.766Z,1478849420.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:20.785Z,1478849420.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:21.167Z,1478849421.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:21.241Z,1478849421.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:21.574Z,1478849421.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:21.589Z,1478849421.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:21.964Z,1478849421.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:22.015Z,1478849422.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:22.364Z,1478849422.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:22.396Z,1478849422.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:22.783Z,1478849422.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:22.829Z,1478849422.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:23.176Z,1478849423.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:23.233Z,1478849423.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:23.583Z,1478849423.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:23.598Z,1478849423.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:23.989Z,1478849423.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:24.021Z,1478849424.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:24.361Z,1478849424.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:24.381Z,1478849424.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:24.765Z,1478849424.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:24.785Z,1478849424.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:25.170Z,1478849425.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:25.213Z,1478849425.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:25.566Z,1478849425.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:25.585Z,1478849425.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:25.990Z,1478849425.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:26.021Z,1478849426.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:26.366Z,1478849426.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:26.394Z,1478849426.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:26.761Z,1478849426.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:26.801Z,1478849426.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:27.162Z,1478849427.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:27.177Z,1478849427.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:27.600Z,1478849427.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:27.642Z,1478849427.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:27.980Z,1478849427.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:28.014Z,1478849428.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:28.381Z,1478849428.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:28.401Z,1478849428.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:28.785Z,1478849428.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:28.801Z,1478849428.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:29.179Z,1478849429.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:29.199Z,1478849429.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:29.585Z,1478849429.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:29.626Z,1478849429.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:29.970Z,1478849429.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:29.986Z,1478849429.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:30.373Z,1478849430.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:30.390Z,1478849430.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:30.761Z,1478849430.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:30.794Z,1478849430.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:31.173Z,1478849431.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:31.189Z,1478849431.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:31.594Z,1478849431.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:31.630Z,1478849431.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:31.973Z,1478849431.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:32.009Z,1478849432.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:32.365Z,1478849432.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:32.381Z,1478849432.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:32.769Z,1478849432.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:32.785Z,1478849432.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:33.176Z,1478849433.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:33.222Z,1478849433.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:33.607Z,1478849433.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:33.627Z,1478849433.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:33.991Z,1478849433.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:34.006Z,1478849434.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:34.384Z,1478849434.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:34.419Z,1478849434.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:34.762Z,1478849434.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:34.805Z,1478849434.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:35.161Z,1478849435.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:35.229Z,1478849435.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:35.561Z,1478849435.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:35.589Z,1478849435.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:35.961Z,1478849435.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:36.013Z,1478849436.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:36.361Z,1478849436.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:36.393Z,1478849436.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:36.761Z,1478849436.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:36.813Z,1478849436.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:36.896Z,1478849436.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:37.162Z,1478849437.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:37.193Z,1478849437.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:37.561Z,1478849437.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:37.609Z,1478849437.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:37.692Z,1478849437.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:37.971Z,1478849437.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:38.016Z,1478849438.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:38.389Z,1478849438.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:38.404Z,1478849438.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:38.772Z,1478849438.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:38.800Z,1478849438.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:39.175Z,1478849439.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:39.208Z,1478849439.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:39.572Z,1478849439.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:39.605Z,1478849439.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:39.973Z,1478849439.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:40.013Z,1478849440.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:40.369Z,1478849440.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:40.384Z,1478849440.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:40.765Z,1478849440.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:40.785Z,1478849440.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:41.169Z,1478849441.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:41.184Z,1478849441.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:41.596Z,1478849441.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:41.639Z,1478849441.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:41.970Z,1478849441.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:41.985Z,1478849441.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:42.369Z,1478849442.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:42.390Z,1478849442.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:42.760Z,1478849442.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:42.793Z,1478849442.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:43.162Z,1478849443.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:43.197Z,1478849443.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:43.589Z,1478849443.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:43.630Z,1478849443.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:43.972Z,1478849443.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:44.005Z,1478849444.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:44.375Z,1478849444.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:44.411Z,1478849444.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:44.772Z,1478849444.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:44.809Z,1478849444.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:45.167Z,1478849445.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:45.182Z,1478849445.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:45.600Z,1478849445.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:45.624Z,1478849445.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:45.965Z,1478849445.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:46.009Z,1478849446.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:46.365Z,1478849446.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:46.385Z,1478849446.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:46.769Z,1478849446.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:46.789Z,1478849446.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:47.168Z,1478849447.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:47.184Z,1478849447.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:47.575Z,1478849447.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:47.633Z,1478849447.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:47.974Z,1478849447.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:47.989Z,1478849447.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:48.368Z,1478849448.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:48.384Z,1478849448.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:48.786Z,1478849448.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:48.805Z,1478849448.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:49.184Z,1478849449.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:49.199Z,1478849449.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:49.596Z,1478849449.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:49.698Z,1478849449.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:49.972Z,1478849449.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:50.034Z,1478849450.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:50.365Z,1478849450.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:50.385Z,1478849450.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:50.765Z,1478849450.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:50.785Z,1478849450.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:51.176Z,1478849451.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:51.225Z,1478849451.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:51.568Z,1478849451.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:51.583Z,1478849451.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:51.980Z,1478849451.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:52.038Z,1478849452.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:52.372Z,1478849452.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:52.387Z,1478849452.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:52.770Z,1478849452.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:52.820Z,1478849452.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:53.169Z,1478849453.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:53.196Z,1478849453.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:53.572Z,1478849453.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:53.588Z,1478849453.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:53.976Z,1478849453.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:54.001Z,1478849454.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:54.376Z,1478849454.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:54.407Z,1478849454.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:54.787Z,1478849454.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:54.803Z,1478849454.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:55.184Z,1478849455.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:55.198Z,1478849455.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:55.585Z,1478849455.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:55.609Z,1478849455.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:55.961Z,1478849455.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:55.981Z,1478849455.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:56.365Z,1478849456.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:56.385Z,1478849456.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:56.769Z,1478849456.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:56.789Z,1478849456.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:57.172Z,1478849457.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:57.187Z,1478849457.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:57.575Z,1478849457.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:57.630Z,1478849457.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:57.965Z,1478849457.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:58.001Z,1478849458.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:58.361Z,1478849458.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:58.393Z,1478849458.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:58.785Z,1478849458.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:58.805Z,1478849458.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:59.183Z,1478849459.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:59.199Z,1478849459.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:59.588Z,1478849459.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:30:59.616Z,1478849459.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:30:59.976Z,1478849459.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:00.018Z,1478849460.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:00.361Z,1478849460.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:00.401Z,1478849460.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:00.761Z,1478849460.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:00.781Z,1478849460.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:01.167Z,1478849461.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:01.212Z,1478849461.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:01.573Z,1478849461.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:01.596Z,1478849461.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:01.964Z,1478849461.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:01.997Z,1478849461.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:02.379Z,1478849462.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:02.398Z,1478849462.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:02.771Z,1478849462.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:02.793Z,1478849462.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:03.169Z,1478849463.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:03.193Z,1478849463.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:03.578Z,1478849463.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:03.628Z,1478849463.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:03.977Z,1478849463.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:04.005Z,1478849464.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:04.373Z,1478849464.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:04.393Z,1478849464.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:07.929Z,1478849467.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:08.010Z,1478849468.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:08.129Z,1478849468.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:08.161Z,1478849468.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:08.496Z,1478849468.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:08.512Z,1478849468.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:08.907Z,1478849468.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:08.957Z,1478849468.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:09.303Z,1478849469.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:09.318Z,1478849469.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:09.703Z,1478849469.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:09.754Z,1478849469.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:10.104Z,1478849470.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:10.155Z,1478849470.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:10.485Z,1478849470.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:10.521Z,1478849470.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:10.885Z,1478849470.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:10.921Z,1478849470.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:11.286Z,1478849471.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:11.325Z,1478849471.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:11.693Z,1478849471.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:11.725Z,1478849471.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:12.085Z,1478849472.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:12.121Z,1478849472.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:12.488Z,1478849472.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:12.516Z,1478849472.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:12.888Z,1478849472.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:12.921Z,1478849472.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:13.294Z,1478849473.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:13.308Z,1478849473.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:13.708Z,1478849473.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:13.729Z,1478849473.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:14.100Z,1478849474.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:14.128Z,1478849474.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:14.486Z,1478849474.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:14.522Z,1478849474.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:14.886Z,1478849474.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:14.922Z,1478849474.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:15.286Z,1478849475.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:15.313Z,1478849475.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:15.694Z,1478849475.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:15.733Z,1478849475.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:16.085Z,1478849476.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:16.101Z,1478849476.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:16.379Z,1478849476.379 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T07:31:16.379Z,1478849476.379 [Rowe_600LCM] Communications Fault, FailCount= 5
2016-11-11T07:31:16.379Z,1478849476.379 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T07:31:16.500Z,1478849476.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:16.531Z,1478849476.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T07:31:16.532Z,1478849476.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:16.568Z,1478849476.568 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T07:31:16.568Z,1478849476.568 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-11-11T07:31:16.783Z,1478849476.783 [Rowe_600LCM](INFO): Powering down
2016-11-11T07:31:16.904Z,1478849476.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:16.953Z,1478849476.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2016-11-11T07:31:16.954Z,1478849476.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:17.300Z,1478849477.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:17.337Z,1478849477.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:31:17.338Z,1478849477.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:17.698Z,1478849477.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:17.713Z,1478849477.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:31:17.714Z,1478849477.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:18.095Z,1478849478.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:18.109Z,1478849478.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:31:18.111Z,1478849478.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:18.498Z,1478849478.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:18.512Z,1478849478.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:31:18.513Z,1478849478.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:18.893Z,1478849478.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:18.909Z,1478849478.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:31:18.910Z,1478849478.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:19.285Z,1478849479.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:19.310Z,1478849479.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:31:19.311Z,1478849479.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:19.689Z,1478849479.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:19.715Z,1478849479.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:31:19.716Z,1478849479.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:20.089Z,1478849480.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:20.114Z,1478849480.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:31:20.116Z,1478849480.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:20.489Z,1478849480.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:20.520Z,1478849480.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:31:20.521Z,1478849480.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:20.886Z,1478849480.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:20.916Z,1478849480.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:31:20.918Z,1478849480.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:21.285Z,1478849481.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:21.317Z,1478849481.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:31:21.318Z,1478849481.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:21.709Z,1478849481.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:21.718Z,1478849481.718 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T07:31:21.718Z,1478849481.718 [BPC1] Data Fault, FailCount= 1
2016-11-11T07:31:21.718Z,1478849481.718 [BPC1](ERROR): Data Fault
2016-11-11T07:31:21.730Z,1478849481.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:31:21.731Z,1478849481.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:21.779Z,1478849481.779 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T07:31:22.100Z,1478849482.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:22.134Z,1478849482.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:31:22.135Z,1478849482.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:22.500Z,1478849482.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:22.527Z,1478849482.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:31:22.528Z,1478849482.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:22.896Z,1478849482.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:22.928Z,1478849482.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T07:31:22.929Z,1478849482.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:22.949Z,1478849482.949 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:31:22.950Z,1478849482.950 [BPC1] No Fault, FailCount= 1
2016-11-11T07:31:23.292Z,1478849483.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:23.369Z,1478849483.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2016-11-11T07:31:23.370Z,1478849483.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:23.688Z,1478849483.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:23.713Z,1478849483.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T07:31:23.714Z,1478849483.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:24.092Z,1478849484.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:24.145Z,1478849484.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T07:31:24.146Z,1478849484.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:24.493Z,1478849484.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:24.508Z,1478849484.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T07:31:24.509Z,1478849484.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:24.886Z,1478849484.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:24.905Z,1478849484.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T07:31:24.906Z,1478849484.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:25.289Z,1478849485.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:25.303Z,1478849485.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T07:31:25.304Z,1478849485.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:25.686Z,1478849485.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:25.704Z,1478849485.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T07:31:25.706Z,1478849485.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:26.090Z,1478849486.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:26.109Z,1478849486.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T07:31:26.110Z,1478849486.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:26.485Z,1478849486.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:26.500Z,1478849486.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T07:31:26.501Z,1478849486.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:26.904Z,1478849486.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:26.918Z,1478849486.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T07:31:26.919Z,1478849486.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:27.301Z,1478849487.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:27.359Z,1478849487.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2016-11-11T07:31:27.364Z,1478849487.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:27.700Z,1478849487.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:27.714Z,1478849487.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T07:31:27.716Z,1478849487.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:28.096Z,1478849488.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:28.130Z,1478849488.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T07:31:28.131Z,1478849488.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:28.485Z,1478849488.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:28.525Z,1478849488.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T07:31:28.526Z,1478849488.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:28.885Z,1478849488.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:28.904Z,1478849488.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T07:31:28.905Z,1478849488.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:29.289Z,1478849489.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:29.303Z,1478849489.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T07:31:29.304Z,1478849489.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:29.689Z,1478849489.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:29.703Z,1478849489.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T07:31:29.705Z,1478849489.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:30.092Z,1478849490.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:30.106Z,1478849490.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T07:31:30.108Z,1478849490.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:30.492Z,1478849490.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:30.506Z,1478849490.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T07:31:30.507Z,1478849490.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:30.888Z,1478849490.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:30.921Z,1478849490.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T07:31:30.922Z,1478849490.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:31.292Z,1478849491.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:31.307Z,1478849491.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T07:31:31.308Z,1478849491.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:31.697Z,1478849491.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:31.712Z,1478849491.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T07:31:31.713Z,1478849491.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:32.104Z,1478849492.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:32.125Z,1478849492.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T07:31:32.127Z,1478849492.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:32.503Z,1478849492.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:32.517Z,1478849492.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T07:31:32.519Z,1478849492.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:32.908Z,1478849492.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:32.928Z,1478849492.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T07:31:32.930Z,1478849492.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:33.308Z,1478849493.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:33.335Z,1478849493.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T07:31:33.337Z,1478849493.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:33.689Z,1478849493.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:33.720Z,1478849493.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T07:31:33.721Z,1478849493.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:34.085Z,1478849494.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:34.121Z,1478849494.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T07:31:34.122Z,1478849494.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:34.485Z,1478849494.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:34.521Z,1478849494.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T07:31:34.522Z,1478849494.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:34.885Z,1478849494.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:34.922Z,1478849494.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T07:31:34.923Z,1478849494.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:35.294Z,1478849495.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:35.319Z,1478849495.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T07:31:35.320Z,1478849495.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:35.685Z,1478849495.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:35.712Z,1478849495.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T07:31:35.713Z,1478849495.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:36.085Z,1478849496.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:36.157Z,1478849496.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:36.492Z,1478849496.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:36.507Z,1478849496.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:36.507Z,1478849496.507 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2016-11-11T07:31:36.507Z,1478849496.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:31:36.513Z,1478849496.513 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:36.513Z,1478849496.513 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 35
2016-11-11T07:31:36.513Z,1478849496.513 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:31:36.548Z,1478849496.548 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:31:36.549Z,1478849496.549 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:31:36.899Z,1478849496.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:36.970Z,1478849496.970 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:31:36.970Z,1478849496.970 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2016-11-11T07:31:36.970Z,1478849496.970 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:31:36.970Z,1478849496.970 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 35
2016-11-11T07:31:37.308Z,1478849497.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:37.328Z,1478849497.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:31:37.328Z,1478849497.328 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:31:37.329Z,1478849497.329 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:31:37.333Z,1478849497.333 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:31:37.334Z,1478849497.334 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:31:37.334Z,1478849497.334 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:31:37.704Z,1478849497.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:37.754Z,1478849497.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:31:37.755Z,1478849497.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:38.110Z,1478849498.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:38.161Z,1478849498.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2016-11-11T07:31:38.162Z,1478849498.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:38.511Z,1478849498.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:38.526Z,1478849498.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:31:38.527Z,1478849498.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:38.886Z,1478849498.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:38.917Z,1478849498.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:31:38.918Z,1478849498.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:39.289Z,1478849499.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:39.314Z,1478849499.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:31:39.315Z,1478849499.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:39.322Z,1478849499.322 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:39.322Z,1478849499.322 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 35
2016-11-11T07:31:39.322Z,1478849499.322 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:31:39.337Z,1478849499.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:31:39.693Z,1478849499.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:39.718Z,1478849499.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:31:39.719Z,1478849499.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:39.738Z,1478849499.739 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:31:39.739Z,1478849499.739 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 35
2016-11-11T07:31:40.085Z,1478849500.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:40.104Z,1478849500.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:31:40.105Z,1478849500.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:40.141Z,1478849500.141 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:31:40.141Z,1478849500.141 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:31:40.142Z,1478849500.142 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:31:40.489Z,1478849500.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:40.525Z,1478849500.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:31:40.526Z,1478849500.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:40.889Z,1478849500.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:40.909Z,1478849500.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:31:40.910Z,1478849500.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:41.289Z,1478849501.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:41.303Z,1478849501.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:31:41.304Z,1478849501.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:41.693Z,1478849501.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:41.712Z,1478849501.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:31:41.714Z,1478849501.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:42.088Z,1478849502.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:42.111Z,1478849502.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:31:42.112Z,1478849502.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:42.500Z,1478849502.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:42.520Z,1478849502.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:31:42.521Z,1478849502.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:42.897Z,1478849502.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:42.917Z,1478849502.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:31:42.918Z,1478849502.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:43.304Z,1478849503.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:43.318Z,1478849503.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T07:31:43.319Z,1478849503.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:43.703Z,1478849503.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:43.717Z,1478849503.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T07:31:43.718Z,1478849503.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:44.093Z,1478849504.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:44.114Z,1478849504.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T07:31:44.115Z,1478849504.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:44.493Z,1478849504.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:44.514Z,1478849504.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T07:31:44.515Z,1478849504.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:44.885Z,1478849504.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:44.910Z,1478849504.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T07:31:44.912Z,1478849504.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:45.285Z,1478849505.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:45.317Z,1478849505.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T07:31:45.318Z,1478849505.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:45.689Z,1478849505.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:45.725Z,1478849505.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T07:31:45.726Z,1478849505.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:46.090Z,1478849506.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:46.115Z,1478849506.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T07:31:46.116Z,1478849506.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:46.485Z,1478849506.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:46.525Z,1478849506.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T07:31:46.527Z,1478849506.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:46.885Z,1478849506.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:46.916Z,1478849506.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T07:31:46.917Z,1478849506.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:47.285Z,1478849507.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:47.300Z,1478849507.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T07:31:47.301Z,1478849507.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:47.704Z,1478849507.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:47.745Z,1478849507.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T07:31:47.746Z,1478849507.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:48.101Z,1478849508.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:48.124Z,1478849508.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T07:31:48.125Z,1478849508.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:48.507Z,1478849508.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:48.522Z,1478849508.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T07:31:48.523Z,1478849508.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:48.903Z,1478849508.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:48.918Z,1478849508.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T07:31:48.919Z,1478849508.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:49.293Z,1478849509.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:49.308Z,1478849509.308 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T07:31:49.308Z,1478849509.308 [BPC1] Data Fault, FailCount= 1
2016-11-11T07:31:49.308Z,1478849509.308 [BPC1](ERROR): Data Fault
2016-11-11T07:31:49.316Z,1478849509.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T07:31:49.317Z,1478849509.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:49.338Z,1478849509.338 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T07:31:49.686Z,1478849509.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:49.711Z,1478849509.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T07:31:49.712Z,1478849509.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:50.085Z,1478849510.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:50.121Z,1478849510.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T07:31:50.122Z,1478849510.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:50.485Z,1478849510.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:50.513Z,1478849510.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T07:31:50.514Z,1478849510.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:50.551Z,1478849510.551 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:31:50.551Z,1478849510.551 [BPC1] No Fault, FailCount= 1
2016-11-11T07:31:50.886Z,1478849510.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:50.974Z,1478849510.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2016-11-11T07:31:50.975Z,1478849510.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:51.289Z,1478849511.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:51.341Z,1478849511.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T07:31:51.342Z,1478849511.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:51.685Z,1478849511.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:51.721Z,1478849511.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T07:31:51.722Z,1478849511.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:52.085Z,1478849512.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:52.123Z,1478849512.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T07:31:52.124Z,1478849512.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:52.485Z,1478849512.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:52.525Z,1478849512.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T07:31:52.526Z,1478849512.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:52.904Z,1478849512.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:52.941Z,1478849512.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T07:31:52.942Z,1478849512.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:53.300Z,1478849513.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:53.335Z,1478849513.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T07:31:53.336Z,1478849513.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:53.700Z,1478849513.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:53.734Z,1478849513.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T07:31:53.734Z,1478849513.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:54.100Z,1478849514.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:54.126Z,1478849514.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T07:31:54.128Z,1478849514.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:54.491Z,1478849514.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:54.520Z,1478849514.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T07:31:54.521Z,1478849514.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:54.885Z,1478849514.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:54.917Z,1478849514.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T07:31:54.918Z,1478849514.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:55.285Z,1478849515.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:55.321Z,1478849515.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T07:31:55.322Z,1478849515.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:55.685Z,1478849515.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:55.720Z,1478849515.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T07:31:55.721Z,1478849515.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:56.085Z,1478849516.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:56.121Z,1478849516.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T07:31:56.122Z,1478849516.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:56.485Z,1478849516.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:56.525Z,1478849516.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:56.885Z,1478849516.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:56.932Z,1478849516.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:57.285Z,1478849517.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:57.325Z,1478849517.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:57.689Z,1478849517.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:57.729Z,1478849517.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:58.099Z,1478849518.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:58.140Z,1478849518.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:58.504Z,1478849518.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:58.539Z,1478849518.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:58.908Z,1478849518.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:58.935Z,1478849518.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:59.304Z,1478849519.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:59.339Z,1478849519.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:31:59.693Z,1478849519.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:31:59.708Z,1478849519.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:00.097Z,1478849520.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:00.117Z,1478849520.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:00.497Z,1478849520.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:00.512Z,1478849520.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:00.888Z,1478849520.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:00.921Z,1478849520.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:01.288Z,1478849521.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:01.316Z,1478849521.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:01.689Z,1478849521.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:01.713Z,1478849521.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:02.085Z,1478849522.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:02.117Z,1478849522.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:02.496Z,1478849522.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:02.517Z,1478849522.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:02.890Z,1478849522.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:02.924Z,1478849522.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:03.306Z,1478849523.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:03.378Z,1478849523.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:03.398Z,1478849523.398 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T07:27:03.3Z
2016-11-11T07:32:03.398Z,1478849523.398 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T07:32:03.398Z,1478849523.398 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T07:32:03.708Z,1478849523.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:03.732Z,1478849523.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:04.531Z,1478849524.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:04.576Z,1478849524.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:04.684Z,1478849524.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:04.699Z,1478849524.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:08.053Z,1478849528.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:08.098Z,1478849528.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:08.139Z,1478849528.138 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0064.lzma
2016-11-11T07:32:08.225Z,1478849528.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:08.241Z,1478849528.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:08.583Z,1478849528.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:08.641Z,1478849528.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:08.941Z,1478849528.941 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0064.lzma.bak
2016-11-11T07:32:08.941Z,1478849528.941 [DataOverHttps](INFO): SBD MOMSN=4555163
2016-11-11T07:32:08.998Z,1478849528.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:09.013Z,1478849529.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:10.344Z,1478849530.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:10.392Z,1478849530.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:10.483Z,1478849530.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:10.521Z,1478849530.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:13.832Z,1478849533.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:13.867Z,1478849533.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:13.965Z,1478849533.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:14.009Z,1478849534.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:14.332Z,1478849534.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:14.356Z,1478849534.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:14.732Z,1478849534.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:14.746Z,1478849534.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:15.124Z,1478849535.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:15.139Z,1478849535.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:15.527Z,1478849535.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:15.542Z,1478849535.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:18.799Z,1478849538.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:18.834Z,1478849538.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:18.884Z,1478849538.884 [DataOverHttps](INFO): Sending 320 bytes from file Logs/20161111T044527/Express0065.lzma
2016-11-11T07:32:18.943Z,1478849538.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:18.959Z,1478849538.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:19.304Z,1478849539.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:19.338Z,1478849539.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:19.665Z,1478849539.665 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0065.lzma.bak
2016-11-11T07:32:19.665Z,1478849539.665 [DataOverHttps](INFO): SBD MOMSN=4555165
2016-11-11T07:32:19.712Z,1478849539.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:19.737Z,1478849539.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:20.956Z,1478849540.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:21.037Z,1478849541.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:21.054Z,1478849541.054 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T07:32:21.054Z,1478849541.054 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T07:32:21.054Z,1478849541.055 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T07:32:21.140Z,1478849541.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:21.178Z,1478849541.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:24.522Z,1478849544.522 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T07:32:24.552Z,1478849544.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:24.591Z,1478849544.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:24.701Z,1478849544.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:24.745Z,1478849544.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:25.045Z,1478849545.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:25.102Z,1478849545.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:25.448Z,1478849545.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:25.486Z,1478849545.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:25.841Z,1478849545.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:25.873Z,1478849545.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:26.241Z,1478849546.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:26.273Z,1478849546.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:26.645Z,1478849546.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:26.669Z,1478849546.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:27.041Z,1478849547.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:27.061Z,1478849547.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:27.444Z,1478849547.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:27.465Z,1478849547.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:27.848Z,1478849547.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:27.863Z,1478849547.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:28.248Z,1478849548.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:28.263Z,1478849548.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:28.648Z,1478849548.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:28.669Z,1478849548.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:29.048Z,1478849549.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:29.064Z,1478849549.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:29.449Z,1478849549.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:29.464Z,1478849549.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:29.824Z,1478849549.824 [NAL9602](INFO): Powering down
2016-11-11T07:32:29.851Z,1478849549.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:29.874Z,1478849549.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:30.241Z,1478849550.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:30.276Z,1478849550.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:30.641Z,1478849550.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:30.668Z,1478849550.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:31.041Z,1478849551.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:31.076Z,1478849551.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:31.441Z,1478849551.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:31.477Z,1478849551.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:31.841Z,1478849551.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:31.864Z,1478849551.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:32.241Z,1478849552.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:32.284Z,1478849552.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:32.645Z,1478849552.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:32.681Z,1478849552.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:33.045Z,1478849553.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:33.077Z,1478849553.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:33.441Z,1478849553.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:33.461Z,1478849553.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:33.849Z,1478849553.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:33.864Z,1478849553.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:34.247Z,1478849554.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:34.262Z,1478849554.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:34.648Z,1478849554.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:34.663Z,1478849554.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:35.047Z,1478849555.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:35.066Z,1478849555.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:35.449Z,1478849555.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:35.469Z,1478849555.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:35.852Z,1478849555.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:35.873Z,1478849555.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:36.249Z,1478849556.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:36.281Z,1478849556.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:36.641Z,1478849556.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:36.661Z,1478849556.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:37.044Z,1478849557.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:37.101Z,1478849557.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:37.449Z,1478849557.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:37.464Z,1478849557.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:37.847Z,1478849557.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:37.897Z,1478849557.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:38.248Z,1478849558.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:38.262Z,1478849558.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:38.644Z,1478849558.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:38.695Z,1478849558.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:39.047Z,1478849559.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:39.106Z,1478849559.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:39.448Z,1478849559.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:39.505Z,1478849559.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:39.841Z,1478849559.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:39.877Z,1478849559.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:40.248Z,1478849560.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:40.299Z,1478849560.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:40.648Z,1478849560.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:40.669Z,1478849560.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:41.044Z,1478849561.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:41.072Z,1478849561.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:41.441Z,1478849561.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:41.467Z,1478849561.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:41.841Z,1478849561.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:41.882Z,1478849561.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:42.245Z,1478849562.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:42.277Z,1478849562.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:42.641Z,1478849562.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:42.666Z,1478849562.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:43.041Z,1478849563.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:43.076Z,1478849563.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:43.446Z,1478849563.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:43.476Z,1478849563.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:43.841Z,1478849563.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:43.856Z,1478849563.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:44.241Z,1478849564.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:44.261Z,1478849564.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:44.649Z,1478849564.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:44.685Z,1478849564.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:45.046Z,1478849565.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:45.062Z,1478849565.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:45.454Z,1478849565.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:45.468Z,1478849565.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:45.847Z,1478849565.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:45.866Z,1478849565.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:46.249Z,1478849566.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:46.264Z,1478849566.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:46.650Z,1478849566.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:46.665Z,1478849566.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:47.048Z,1478849567.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:47.068Z,1478849567.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:47.442Z,1478849567.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:47.477Z,1478849567.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:47.843Z,1478849567.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:47.870Z,1478849567.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:48.241Z,1478849568.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:48.273Z,1478849568.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:48.645Z,1478849568.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:48.722Z,1478849568.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:49.041Z,1478849569.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:49.073Z,1478849569.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:49.441Z,1478849569.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:49.478Z,1478849569.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:49.848Z,1478849569.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:49.864Z,1478849569.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:50.248Z,1478849570.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:50.264Z,1478849570.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:50.647Z,1478849570.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:50.670Z,1478849570.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:51.044Z,1478849571.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:51.076Z,1478849571.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:51.441Z,1478849571.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:51.475Z,1478849571.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:51.841Z,1478849571.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:51.890Z,1478849571.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:52.241Z,1478849572.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:52.377Z,1478849572.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:52.641Z,1478849572.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:52.664Z,1478849572.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:53.041Z,1478849573.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:53.098Z,1478849573.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:53.449Z,1478849573.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:53.464Z,1478849573.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:53.847Z,1478849573.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:53.900Z,1478849573.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:54.248Z,1478849574.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:54.300Z,1478849574.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:54.647Z,1478849574.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:54.665Z,1478849574.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:55.052Z,1478849575.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:55.073Z,1478849575.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:55.448Z,1478849575.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:55.469Z,1478849575.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:55.848Z,1478849575.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:55.863Z,1478849575.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:56.241Z,1478849576.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:56.271Z,1478849576.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:56.641Z,1478849576.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:56.674Z,1478849576.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:57.041Z,1478849577.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:57.077Z,1478849577.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:57.443Z,1478849577.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:57.485Z,1478849577.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:57.843Z,1478849577.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:57.893Z,1478849577.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:58.243Z,1478849578.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:58.282Z,1478849578.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:58.647Z,1478849578.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:58.734Z,1478849578.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:59.049Z,1478849579.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:59.066Z,1478849579.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:59.455Z,1478849579.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:59.488Z,1478849579.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:32:59.842Z,1478849579.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:32:59.885Z,1478849579.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:00.241Z,1478849580.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:00.265Z,1478849580.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:00.643Z,1478849580.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:00.687Z,1478849580.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:01.046Z,1478849581.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:01.061Z,1478849581.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:01.447Z,1478849581.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:01.496Z,1478849581.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:01.850Z,1478849581.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:01.874Z,1478849581.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:02.250Z,1478849582.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:02.269Z,1478849582.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:02.643Z,1478849582.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:02.689Z,1478849582.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:03.054Z,1478849583.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:03.100Z,1478849583.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:03.450Z,1478849583.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:03.473Z,1478849583.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:03.843Z,1478849583.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:03.885Z,1478849583.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:04.243Z,1478849584.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:04.262Z,1478849584.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:04.647Z,1478849584.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:04.695Z,1478849584.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:05.050Z,1478849585.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:05.069Z,1478849585.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:05.441Z,1478849585.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:05.467Z,1478849585.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:05.841Z,1478849585.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:05.866Z,1478849585.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:06.241Z,1478849586.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:06.294Z,1478849586.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:06.645Z,1478849586.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:06.717Z,1478849586.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:07.041Z,1478849587.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:07.061Z,1478849587.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:07.448Z,1478849587.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:07.485Z,1478849587.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:07.845Z,1478849587.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:07.877Z,1478849587.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:08.241Z,1478849588.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:08.293Z,1478849588.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:08.641Z,1478849588.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:08.689Z,1478849588.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:09.052Z,1478849589.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:09.068Z,1478849589.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:09.448Z,1478849589.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:09.474Z,1478849589.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:09.848Z,1478849589.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:09.863Z,1478849589.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:10.267Z,1478849590.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:10.282Z,1478849590.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:10.641Z,1478849590.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:10.673Z,1478849590.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:11.041Z,1478849591.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:11.077Z,1478849591.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:11.449Z,1478849591.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:11.485Z,1478849591.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:11.843Z,1478849591.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:11.888Z,1478849591.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:12.243Z,1478849592.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:12.296Z,1478849592.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:12.648Z,1478849592.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:12.677Z,1478849592.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:13.043Z,1478849593.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:13.081Z,1478849593.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:13.443Z,1478849593.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:13.485Z,1478849593.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:13.843Z,1478849593.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:13.878Z,1478849593.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:14.243Z,1478849594.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:14.285Z,1478849594.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:14.642Z,1478849594.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:14.673Z,1478849594.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:15.049Z,1478849595.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:15.074Z,1478849595.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:15.448Z,1478849595.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:15.469Z,1478849595.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:15.843Z,1478849595.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:15.888Z,1478849595.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:16.251Z,1478849596.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:16.299Z,1478849596.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:16.650Z,1478849596.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:16.685Z,1478849596.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:17.050Z,1478849597.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:17.073Z,1478849597.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:17.444Z,1478849597.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:17.490Z,1478849597.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:17.846Z,1478849597.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:17.890Z,1478849597.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:18.247Z,1478849598.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:18.292Z,1478849598.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:18.643Z,1478849598.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:18.677Z,1478849598.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:19.043Z,1478849599.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:19.078Z,1478849599.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:19.443Z,1478849599.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:19.489Z,1478849599.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:19.847Z,1478849599.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:19.882Z,1478849599.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:20.243Z,1478849600.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:20.281Z,1478849600.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:20.643Z,1478849600.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:20.689Z,1478849600.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:21.043Z,1478849601.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:21.149Z,1478849601.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:21.451Z,1478849601.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:21.483Z,1478849601.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:24.681Z,1478849604.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:24.737Z,1478849604.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:24.836Z,1478849604.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:24.863Z,1478849604.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:25.216Z,1478849605.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:25.254Z,1478849605.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:25.620Z,1478849605.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:25.681Z,1478849605.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:26.009Z,1478849606.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:26.040Z,1478849606.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:26.410Z,1478849606.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:26.445Z,1478849606.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:26.823Z,1478849606.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:26.838Z,1478849606.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:27.216Z,1478849607.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:27.243Z,1478849607.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:27.624Z,1478849607.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:27.640Z,1478849607.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:28.010Z,1478849608.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:28.037Z,1478849608.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:28.420Z,1478849608.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:28.443Z,1478849608.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:28.813Z,1478849608.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:28.845Z,1478849608.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:29.238Z,1478849609.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:29.269Z,1478849609.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:29.628Z,1478849609.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:29.664Z,1478849609.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:30.022Z,1478849610.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:30.037Z,1478849610.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:30.421Z,1478849610.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:30.465Z,1478849610.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:30.819Z,1478849610.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:30.827Z,1478849610.827 [PNI_TCM](ERROR): CRC does not match. Expected:0x709 got:0x16913
2016-11-11T07:33:30.881Z,1478849610.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:31.220Z,1478849611.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:31.254Z,1478849611.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:31.611Z,1478849611.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:31.647Z,1478849611.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:32.009Z,1478849612.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:32.049Z,1478849612.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:32.428Z,1478849612.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:32.435Z,1478849612.435 [PNI_TCM](ERROR): CRC does not match. Expected:0x45836 got:0x29712
2016-11-11T07:33:32.454Z,1478849612.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:32.827Z,1478849612.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:32.849Z,1478849612.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:33.245Z,1478849613.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:33.269Z,1478849613.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:33.609Z,1478849613.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:33.645Z,1478849613.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:34.032Z,1478849614.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:34.047Z,1478849614.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:34.426Z,1478849614.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:34.452Z,1478849614.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:34.864Z,1478849614.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:34.909Z,1478849614.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:35.218Z,1478849615.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:35.253Z,1478849615.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:35.615Z,1478849615.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:35.649Z,1478849615.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:36.018Z,1478849616.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:36.057Z,1478849616.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:36.417Z,1478849616.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:36.432Z,1478849616.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:36.814Z,1478849616.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:36.832Z,1478849616.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:37.215Z,1478849617.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:37.230Z,1478849617.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:37.615Z,1478849617.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:37.650Z,1478849617.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:38.011Z,1478849618.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:38.026Z,1478849618.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:38.414Z,1478849618.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:38.431Z,1478849618.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:38.815Z,1478849618.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:38.853Z,1478849618.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:39.212Z,1478849619.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:39.233Z,1478849619.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:39.617Z,1478849619.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:39.658Z,1478849619.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:40.015Z,1478849620.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:40.054Z,1478849620.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:40.411Z,1478849620.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:40.426Z,1478849620.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:40.817Z,1478849620.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:40.837Z,1478849620.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:41.213Z,1478849621.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:41.228Z,1478849621.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:41.615Z,1478849621.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:41.631Z,1478849621.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:42.015Z,1478849622.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:42.030Z,1478849622.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:42.412Z,1478849622.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:42.427Z,1478849622.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:42.810Z,1478849622.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:42.825Z,1478849622.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:43.216Z,1478849623.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:43.230Z,1478849623.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:43.612Z,1478849623.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:43.627Z,1478849623.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:44.018Z,1478849624.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:44.034Z,1478849624.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:44.422Z,1478849624.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:44.438Z,1478849624.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:44.810Z,1478849624.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:44.827Z,1478849624.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:45.214Z,1478849625.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:45.231Z,1478849625.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:45.617Z,1478849625.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:45.632Z,1478849625.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:46.061Z,1478849626.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:46.089Z,1478849626.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:46.421Z,1478849626.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:46.441Z,1478849626.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:46.817Z,1478849626.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:46.837Z,1478849626.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:47.213Z,1478849627.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:47.233Z,1478849627.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:47.617Z,1478849627.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:47.637Z,1478849627.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:48.022Z,1478849628.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:48.037Z,1478849628.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:48.417Z,1478849628.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:48.437Z,1478849628.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:48.809Z,1478849628.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:48.829Z,1478849628.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:49.221Z,1478849629.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:49.241Z,1478849629.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:49.630Z,1478849629.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:49.658Z,1478849629.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:50.046Z,1478849630.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:50.070Z,1478849630.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:50.413Z,1478849630.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:50.433Z,1478849630.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:50.821Z,1478849630.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:50.861Z,1478849630.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:51.229Z,1478849631.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:51.249Z,1478849631.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:51.645Z,1478849631.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:51.673Z,1478849631.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:52.021Z,1478849632.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:52.054Z,1478849632.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:52.408Z,1478849632.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:52.424Z,1478849632.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:52.821Z,1478849632.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:52.836Z,1478849632.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:53.209Z,1478849633.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:53.249Z,1478849633.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:53.617Z,1478849633.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:53.632Z,1478849633.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:54.013Z,1478849634.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:54.054Z,1478849634.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:54.417Z,1478849634.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:54.458Z,1478849634.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:54.813Z,1478849634.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:54.829Z,1478849634.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:55.213Z,1478849635.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:55.228Z,1478849635.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:55.613Z,1478849635.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:55.628Z,1478849635.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:56.017Z,1478849636.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:56.037Z,1478849636.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:56.413Z,1478849636.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:56.428Z,1478849636.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:56.808Z,1478849636.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:56.823Z,1478849636.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:57.213Z,1478849637.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:57.228Z,1478849637.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:57.617Z,1478849637.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:57.632Z,1478849637.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:58.013Z,1478849638.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:58.028Z,1478849638.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:58.408Z,1478849638.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:58.423Z,1478849638.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:58.813Z,1478849638.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:58.828Z,1478849638.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:59.230Z,1478849639.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:59.254Z,1478849639.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:33:59.608Z,1478849639.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:33:59.623Z,1478849639.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:00.013Z,1478849640.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:00.028Z,1478849640.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:00.409Z,1478849640.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:00.431Z,1478849640.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:00.809Z,1478849640.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:00.832Z,1478849640.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:01.209Z,1478849641.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:01.240Z,1478849641.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:01.609Z,1478849641.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:01.640Z,1478849641.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:02.009Z,1478849642.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:02.037Z,1478849642.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:02.413Z,1478849642.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:02.436Z,1478849642.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:02.833Z,1478849642.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:02.869Z,1478849642.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:03.217Z,1478849643.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:03.245Z,1478849643.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:03.613Z,1478849643.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:03.633Z,1478849643.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:04.013Z,1478849644.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:04.037Z,1478849644.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:04.413Z,1478849644.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:04.437Z,1478849644.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:04.817Z,1478849644.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:04.841Z,1478849644.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:05.209Z,1478849645.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:05.257Z,1478849645.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:05.611Z,1478849645.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:05.630Z,1478849645.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:06.025Z,1478849646.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:06.045Z,1478849646.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:06.424Z,1478849646.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:06.445Z,1478849646.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:06.849Z,1478849646.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:06.905Z,1478849646.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:07.216Z,1478849647.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:07.239Z,1478849647.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:07.624Z,1478849647.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:07.679Z,1478849647.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:08.028Z,1478849648.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:08.043Z,1478849648.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:08.446Z,1478849648.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:08.513Z,1478849648.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:08.813Z,1478849648.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:08.848Z,1478849648.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:09.209Z,1478849649.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:09.266Z,1478849649.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:09.613Z,1478849649.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:09.639Z,1478849649.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:10.009Z,1478849650.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:10.045Z,1478849650.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:10.413Z,1478849650.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:10.449Z,1478849650.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:10.809Z,1478849650.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:10.824Z,1478849650.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:11.213Z,1478849651.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:11.254Z,1478849651.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:11.613Z,1478849651.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:11.628Z,1478849651.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:12.013Z,1478849652.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:12.033Z,1478849652.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:12.413Z,1478849652.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:12.427Z,1478849652.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:12.813Z,1478849652.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:12.828Z,1478849652.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:13.217Z,1478849653.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:13.237Z,1478849653.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:13.616Z,1478849653.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:13.631Z,1478849653.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:14.016Z,1478849654.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:14.032Z,1478849654.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:14.420Z,1478849654.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:14.436Z,1478849654.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:14.816Z,1478849654.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:14.841Z,1478849654.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:15.217Z,1478849655.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:15.233Z,1478849655.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:15.626Z,1478849655.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:15.645Z,1478849655.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:16.009Z,1478849656.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:16.043Z,1478849656.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:16.409Z,1478849656.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:16.441Z,1478849656.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:16.820Z,1478849656.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:16.841Z,1478849656.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:17.220Z,1478849657.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:17.241Z,1478849657.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:17.609Z,1478849657.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:17.641Z,1478849657.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:18.013Z,1478849658.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:18.045Z,1478849658.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:18.413Z,1478849658.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:18.445Z,1478849658.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:18.809Z,1478849658.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:18.845Z,1478849658.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:19.217Z,1478849659.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:19.243Z,1478849659.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:19.648Z,1478849659.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:19.708Z,1478849659.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:20.018Z,1478849660.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:20.069Z,1478849660.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:20.425Z,1478849660.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:20.440Z,1478849660.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:20.816Z,1478849660.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:20.845Z,1478849660.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:21.223Z,1478849661.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:21.277Z,1478849661.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:21.621Z,1478849661.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:21.644Z,1478849661.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:24.937Z,1478849664.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:24.989Z,1478849664.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:25.089Z,1478849665.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:25.129Z,1478849665.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:25.449Z,1478849665.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:25.505Z,1478849665.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:25.843Z,1478849665.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:25.892Z,1478849665.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:26.243Z,1478849666.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:26.258Z,1478849666.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:26.643Z,1478849666.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:26.658Z,1478849666.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:27.044Z,1478849667.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:27.076Z,1478849667.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:27.444Z,1478849667.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:27.461Z,1478849667.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:27.848Z,1478849667.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:27.863Z,1478849667.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:28.245Z,1478849668.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:28.261Z,1478849668.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:28.645Z,1478849668.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:28.660Z,1478849668.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:29.048Z,1478849669.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:29.077Z,1478849669.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:29.437Z,1478849669.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:29.470Z,1478849669.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:29.837Z,1478849669.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:29.864Z,1478849669.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:30.241Z,1478849670.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:30.267Z,1478849670.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:30.637Z,1478849670.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:30.660Z,1478849670.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:31.037Z,1478849671.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:31.068Z,1478849671.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:31.442Z,1478849671.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:31.458Z,1478849671.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:31.842Z,1478849671.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:31.857Z,1478849671.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:32.244Z,1478849672.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:32.260Z,1478849672.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:32.645Z,1478849672.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:32.660Z,1478849672.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:33.044Z,1478849673.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:33.061Z,1478849673.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:33.444Z,1478849673.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:33.460Z,1478849673.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:33.837Z,1478849673.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:33.872Z,1478849673.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:34.237Z,1478849674.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:34.267Z,1478849674.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:34.641Z,1478849674.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:34.673Z,1478849674.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:35.041Z,1478849675.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:35.067Z,1478849675.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:35.437Z,1478849675.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:35.473Z,1478849675.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:35.837Z,1478849675.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:35.873Z,1478849675.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:36.241Z,1478849676.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:36.273Z,1478849676.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:36.637Z,1478849676.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:36.698Z,1478849676.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:37.037Z,1478849677.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:37.077Z,1478849677.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:37.437Z,1478849677.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:37.473Z,1478849677.473 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:37.473Z,1478849677.473 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2016-11-11T07:34:37.474Z,1478849677.474 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:34:37.484Z,1478849677.484 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:37.484Z,1478849677.484 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 36
2016-11-11T07:34:37.485Z,1478849677.485 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:34:37.522Z,1478849677.522 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:34:37.522Z,1478849677.522 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:34:37.837Z,1478849677.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:37.920Z,1478849677.921 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:34:37.921Z,1478849677.921 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2016-11-11T07:34:37.921Z,1478849677.921 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:34:37.921Z,1478849677.921 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 36
2016-11-11T07:34:38.244Z,1478849678.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:38.258Z,1478849678.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:34:38.258Z,1478849678.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:34:38.259Z,1478849678.259 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:34:38.264Z,1478849678.264 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:34:38.264Z,1478849678.264 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:34:38.264Z,1478849678.264 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:34:38.651Z,1478849678.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:38.702Z,1478849678.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:34:38.704Z,1478849678.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:39.044Z,1478849679.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:39.073Z,1478849679.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:34:39.074Z,1478849679.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:39.441Z,1478849679.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:39.495Z,1478849679.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:34:39.496Z,1478849679.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:39.840Z,1478849679.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:39.887Z,1478849679.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:34:39.888Z,1478849679.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:40.244Z,1478849680.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:40.264Z,1478849680.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:34:40.266Z,1478849680.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:40.272Z,1478849680.272 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:40.273Z,1478849680.273 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 36
2016-11-11T07:34:40.273Z,1478849680.273 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:34:40.319Z,1478849680.319 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:34:40.644Z,1478849680.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:40.659Z,1478849680.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:34:40.660Z,1478849680.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:40.680Z,1478849680.680 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:34:40.680Z,1478849680.680 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 36
2016-11-11T07:34:41.037Z,1478849681.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:41.062Z,1478849681.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:34:41.063Z,1478849681.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:41.069Z,1478849681.069 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:34:41.070Z,1478849681.070 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:34:41.070Z,1478849681.070 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:34:41.437Z,1478849681.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:41.470Z,1478849681.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:34:41.471Z,1478849681.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:41.837Z,1478849681.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:41.862Z,1478849681.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:34:41.864Z,1478849681.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:42.248Z,1478849682.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:42.271Z,1478849682.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:34:42.272Z,1478849682.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:42.637Z,1478849682.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:42.668Z,1478849682.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:34:42.669Z,1478849682.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:43.037Z,1478849683.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:43.068Z,1478849683.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:34:43.069Z,1478849683.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:43.437Z,1478849683.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:43.473Z,1478849683.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:34:43.474Z,1478849683.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:43.837Z,1478849683.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:43.872Z,1478849683.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:34:43.873Z,1478849683.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:44.237Z,1478849684.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:44.274Z,1478849684.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T07:34:44.275Z,1478849684.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:44.641Z,1478849684.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:44.673Z,1478849684.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T07:34:44.674Z,1478849684.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:45.037Z,1478849685.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:45.083Z,1478849685.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T07:34:45.085Z,1478849685.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:45.438Z,1478849685.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:45.477Z,1478849685.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T07:34:45.478Z,1478849685.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:45.838Z,1478849685.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:45.853Z,1478849685.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T07:34:45.854Z,1478849685.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:46.243Z,1478849686.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:46.257Z,1478849686.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T07:34:46.258Z,1478849686.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:46.645Z,1478849686.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:46.660Z,1478849686.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T07:34:46.661Z,1478849686.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:47.045Z,1478849687.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:47.064Z,1478849687.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T07:34:47.065Z,1478849687.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:47.444Z,1478849687.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:47.464Z,1478849687.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T07:34:47.465Z,1478849687.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:47.844Z,1478849687.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:47.864Z,1478849687.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T07:34:47.865Z,1478849687.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:48.240Z,1478849688.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:48.269Z,1478849688.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T07:34:48.270Z,1478849688.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:48.637Z,1478849688.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:48.671Z,1478849688.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T07:34:48.672Z,1478849688.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:49.037Z,1478849689.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:49.086Z,1478849689.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T07:34:49.095Z,1478849689.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:49.437Z,1478849689.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:49.477Z,1478849689.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T07:34:49.478Z,1478849689.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:49.837Z,1478849689.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:49.881Z,1478849689.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T07:34:49.882Z,1478849689.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:50.240Z,1478849690.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:50.281Z,1478849690.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T07:34:50.282Z,1478849690.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:50.640Z,1478849690.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:50.691Z,1478849690.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T07:34:50.697Z,1478849690.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:51.044Z,1478849691.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:51.058Z,1478849691.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T07:34:51.060Z,1478849691.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:51.444Z,1478849691.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:51.459Z,1478849691.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T07:34:51.460Z,1478849691.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:51.843Z,1478849691.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:51.903Z,1478849691.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T07:34:51.905Z,1478849691.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:52.244Z,1478849692.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:52.264Z,1478849692.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T07:34:52.265Z,1478849692.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:52.644Z,1478849692.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:52.659Z,1478849692.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T07:34:52.660Z,1478849692.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:53.045Z,1478849693.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:53.102Z,1478849693.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T07:34:53.103Z,1478849693.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:53.445Z,1478849693.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:53.464Z,1478849693.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T07:34:53.465Z,1478849693.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:53.837Z,1478849693.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:53.901Z,1478849693.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T07:34:53.902Z,1478849693.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:54.237Z,1478849694.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:54.261Z,1478849694.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T07:34:54.262Z,1478849694.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:54.637Z,1478849694.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:54.686Z,1478849694.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T07:34:54.687Z,1478849694.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:55.037Z,1478849695.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:55.069Z,1478849695.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T07:34:55.070Z,1478849695.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:55.441Z,1478849695.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:55.465Z,1478849695.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T07:34:55.466Z,1478849695.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:55.837Z,1478849695.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:55.875Z,1478849695.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T07:34:55.877Z,1478849695.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:56.237Z,1478849696.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:56.274Z,1478849696.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T07:34:56.280Z,1478849696.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:56.637Z,1478849696.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:56.672Z,1478849696.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T07:34:56.673Z,1478849696.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:57.037Z,1478849697.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:57.072Z,1478849697.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T07:34:57.073Z,1478849697.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:57.437Z,1478849697.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:57.468Z,1478849697.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2016-11-11T07:34:57.470Z,1478849697.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:57.837Z,1478849697.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:57.881Z,1478849697.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:58.237Z,1478849698.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:58.280Z,1478849698.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:58.637Z,1478849698.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:58.652Z,1478849698.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:59.037Z,1478849699.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:59.057Z,1478849699.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:59.444Z,1478849699.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:59.463Z,1478849699.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:34:59.844Z,1478849699.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:34:59.859Z,1478849699.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:00.244Z,1478849700.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:00.259Z,1478849700.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:00.644Z,1478849700.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:00.658Z,1478849700.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:01.044Z,1478849701.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:01.064Z,1478849701.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:01.444Z,1478849701.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:01.465Z,1478849701.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:01.848Z,1478849701.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:01.867Z,1478849701.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:02.237Z,1478849702.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:02.279Z,1478849702.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:02.637Z,1478849702.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:02.673Z,1478849702.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:03.037Z,1478849703.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:03.072Z,1478849703.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:03.440Z,1478849703.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:03.456Z,1478849703.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:03.843Z,1478849703.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:03.859Z,1478849703.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:04.240Z,1478849704.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:04.265Z,1478849704.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:04.643Z,1478849704.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:04.658Z,1478849704.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:05.046Z,1478849705.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:05.061Z,1478849705.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:05.444Z,1478849705.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:05.501Z,1478849705.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:05.837Z,1478849705.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:05.869Z,1478849705.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:06.237Z,1478849706.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:06.269Z,1478849706.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:06.637Z,1478849706.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:06.672Z,1478849706.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:07.037Z,1478849707.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:07.069Z,1478849707.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:07.437Z,1478849707.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:07.472Z,1478849707.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:07.837Z,1478849707.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:07.875Z,1478849707.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:08.237Z,1478849708.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:08.252Z,1478849708.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:08.637Z,1478849708.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:08.654Z,1478849708.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:09.036Z,1478849709.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:09.055Z,1478849709.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:09.442Z,1478849709.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:09.458Z,1478849709.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:09.840Z,1478849709.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:09.849Z,1478849709.849 [BPC1](ERROR): Failed to receive battery data
2016-11-11T07:35:09.849Z,1478849709.849 [BPC1] Communications Fault, FailCount= 1
2016-11-11T07:35:09.849Z,1478849709.849 [BPC1](ERROR): Communications Fault
2016-11-11T07:35:09.864Z,1478849709.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:09.929Z,1478849709.929 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T07:35:10.239Z,1478849710.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:10.269Z,1478849710.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:10.648Z,1478849710.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:10.675Z,1478849710.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:11.037Z,1478849711.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:11.072Z,1478849711.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:11.121Z,1478849711.121 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:35:11.121Z,1478849711.121 [BPC1] No Fault, FailCount= 1
2016-11-11T07:35:11.437Z,1478849711.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:11.517Z,1478849711.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:11.837Z,1478849711.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:11.885Z,1478849711.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:12.238Z,1478849712.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:12.273Z,1478849712.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:12.637Z,1478849712.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:12.672Z,1478849712.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:13.037Z,1478849713.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:13.069Z,1478849713.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:13.437Z,1478849713.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:13.472Z,1478849713.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:13.839Z,1478849713.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:13.868Z,1478849713.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:14.237Z,1478849714.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:14.281Z,1478849714.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:14.642Z,1478849714.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:14.673Z,1478849714.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:15.047Z,1478849715.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:15.063Z,1478849715.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:15.443Z,1478849715.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:15.458Z,1478849715.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:15.840Z,1478849715.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:15.871Z,1478849715.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:16.250Z,1478849716.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:16.273Z,1478849716.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:16.648Z,1478849716.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:16.664Z,1478849716.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:17.039Z,1478849717.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:17.072Z,1478849717.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:17.437Z,1478849717.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:17.477Z,1478849717.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:17.837Z,1478849717.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:17.867Z,1478849717.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:18.238Z,1478849718.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:18.266Z,1478849718.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:18.639Z,1478849718.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:18.670Z,1478849718.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:19.037Z,1478849719.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:19.072Z,1478849719.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:19.437Z,1478849719.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:19.477Z,1478849719.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:19.843Z,1478849719.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:19.858Z,1478849719.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:20.244Z,1478849720.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:20.259Z,1478849720.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:20.644Z,1478849720.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:20.683Z,1478849720.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:21.042Z,1478849721.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:21.051Z,1478849721.051 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T07:35:21.088Z,1478849721.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:21.443Z,1478849721.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:21.458Z,1478849721.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:21.850Z,1478849721.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:21.865Z,1478849721.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:25.298Z,1478849725.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:25.389Z,1478849725.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:25.492Z,1478849725.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:25.520Z,1478849725.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:25.853Z,1478849725.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:25.905Z,1478849725.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:26.260Z,1478849726.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:26.281Z,1478849726.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:26.658Z,1478849726.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:26.711Z,1478849726.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:27.061Z,1478849727.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:27.115Z,1478849727.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:27.459Z,1478849727.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:27.474Z,1478849727.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:27.852Z,1478849727.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:27.877Z,1478849727.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:28.249Z,1478849728.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:28.285Z,1478849728.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:28.659Z,1478849728.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:28.681Z,1478849728.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:29.051Z,1478849729.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:29.077Z,1478849729.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:29.449Z,1478849729.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:29.480Z,1478849729.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:29.849Z,1478849729.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:29.883Z,1478849729.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:30.251Z,1478849730.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:30.278Z,1478849730.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:30.650Z,1478849730.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:30.686Z,1478849730.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:31.049Z,1478849731.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:31.084Z,1478849731.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:31.449Z,1478849731.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:31.476Z,1478849731.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:31.851Z,1478849731.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:31.884Z,1478849731.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:32.249Z,1478849732.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:32.284Z,1478849732.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:32.649Z,1478849732.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:32.672Z,1478849732.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:33.049Z,1478849733.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:33.089Z,1478849733.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:33.451Z,1478849733.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:33.488Z,1478849733.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:33.849Z,1478849733.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:33.869Z,1478849733.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:34.249Z,1478849734.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:34.269Z,1478849734.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:34.656Z,1478849734.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:34.671Z,1478849734.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:35.054Z,1478849735.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:35.089Z,1478849735.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:35.455Z,1478849735.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:35.477Z,1478849735.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:35.859Z,1478849735.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:35.874Z,1478849735.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:36.261Z,1478849736.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:36.276Z,1478849736.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:36.660Z,1478849736.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:36.675Z,1478849736.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:37.049Z,1478849737.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:37.083Z,1478849737.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:37.460Z,1478849737.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:37.533Z,1478849737.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:37.853Z,1478849737.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:37.886Z,1478849737.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:38.250Z,1478849738.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:38.298Z,1478849738.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:38.649Z,1478849738.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:38.681Z,1478849738.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:39.049Z,1478849739.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:39.097Z,1478849739.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:39.449Z,1478849739.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:39.501Z,1478849739.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:39.849Z,1478849739.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:39.881Z,1478849739.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:40.249Z,1478849740.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:40.288Z,1478849740.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:40.649Z,1478849740.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:40.687Z,1478849740.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:41.049Z,1478849741.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:41.085Z,1478849741.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:41.449Z,1478849741.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:41.485Z,1478849741.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:41.849Z,1478849741.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:41.885Z,1478849741.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:42.249Z,1478849742.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:42.272Z,1478849742.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:42.649Z,1478849742.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:42.692Z,1478849742.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:43.049Z,1478849743.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:43.092Z,1478849743.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:43.449Z,1478849743.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:43.464Z,1478849743.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:43.849Z,1478849743.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:43.869Z,1478849743.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:44.249Z,1478849744.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:44.269Z,1478849744.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:44.649Z,1478849744.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:44.664Z,1478849744.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:45.054Z,1478849745.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:45.069Z,1478849745.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:45.461Z,1478849745.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:45.481Z,1478849745.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:45.857Z,1478849745.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:45.872Z,1478849745.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:46.256Z,1478849746.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:46.277Z,1478849746.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:46.659Z,1478849746.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:46.674Z,1478849746.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:47.056Z,1478849747.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:47.071Z,1478849747.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:47.456Z,1478849747.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:47.471Z,1478849747.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:47.861Z,1478849747.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:47.876Z,1478849747.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:48.260Z,1478849748.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:48.275Z,1478849748.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:48.649Z,1478849748.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:48.674Z,1478849748.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:49.060Z,1478849749.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:49.081Z,1478849749.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:49.460Z,1478849749.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:49.475Z,1478849749.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:49.849Z,1478849749.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:49.901Z,1478849749.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:50.253Z,1478849750.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:50.315Z,1478849750.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:50.649Z,1478849750.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:50.664Z,1478849750.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:50.705Z,1478849750.705 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T07:35:51.049Z,1478849751.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:51.102Z,1478849751.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:51.457Z,1478849751.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:51.493Z,1478849751.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:51.849Z,1478849751.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:51.901Z,1478849751.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:52.249Z,1478849752.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:52.302Z,1478849752.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:52.653Z,1478849752.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:52.689Z,1478849752.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:53.056Z,1478849753.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:53.072Z,1478849753.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:53.456Z,1478849753.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:53.471Z,1478849753.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:53.853Z,1478849753.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:53.872Z,1478849753.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:54.256Z,1478849754.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:54.271Z,1478849754.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:54.656Z,1478849754.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:54.677Z,1478849754.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:55.057Z,1478849755.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:55.123Z,1478849755.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:55.456Z,1478849755.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:55.471Z,1478849755.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:55.863Z,1478849755.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:55.890Z,1478849755.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:56.249Z,1478849756.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:56.285Z,1478849756.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:56.649Z,1478849756.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:56.685Z,1478849756.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:57.049Z,1478849757.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:57.084Z,1478849757.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:57.449Z,1478849757.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:57.485Z,1478849757.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:57.849Z,1478849757.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:57.905Z,1478849757.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:58.249Z,1478849758.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:58.292Z,1478849758.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:58.648Z,1478849758.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:58.689Z,1478849758.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:59.049Z,1478849759.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:59.064Z,1478849759.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:59.453Z,1478849759.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:59.468Z,1478849759.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:35:59.857Z,1478849759.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:35:59.877Z,1478849759.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:00.256Z,1478849760.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:00.277Z,1478849760.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:00.656Z,1478849760.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:00.677Z,1478849760.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:01.061Z,1478849761.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:01.081Z,1478849761.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:01.456Z,1478849761.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:01.472Z,1478849761.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:01.852Z,1478849761.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:01.877Z,1478849761.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:02.248Z,1478849762.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:02.286Z,1478849762.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:02.649Z,1478849762.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:02.705Z,1478849762.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:03.050Z,1478849763.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:03.093Z,1478849763.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:03.449Z,1478849763.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:03.489Z,1478849763.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:03.849Z,1478849763.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:03.901Z,1478849763.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:04.250Z,1478849764.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:04.269Z,1478849764.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:04.649Z,1478849764.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:04.694Z,1478849764.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:05.049Z,1478849765.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:05.101Z,1478849765.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:05.449Z,1478849765.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:05.466Z,1478849765.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:05.854Z,1478849765.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:05.870Z,1478849765.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:06.252Z,1478849766.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:06.274Z,1478849766.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:06.656Z,1478849766.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:06.671Z,1478849766.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:07.055Z,1478849767.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:07.069Z,1478849767.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:07.456Z,1478849767.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:07.471Z,1478849767.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:07.856Z,1478849767.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:07.870Z,1478849767.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:08.257Z,1478849768.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:08.277Z,1478849768.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:08.657Z,1478849768.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:08.672Z,1478849768.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:09.049Z,1478849769.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:09.082Z,1478849769.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:09.449Z,1478849769.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:09.482Z,1478849769.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:09.849Z,1478849769.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:09.881Z,1478849769.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:10.249Z,1478849770.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:10.282Z,1478849770.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:10.649Z,1478849770.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:10.682Z,1478849770.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:11.049Z,1478849771.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:11.074Z,1478849771.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:11.449Z,1478849771.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:11.482Z,1478849771.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:11.849Z,1478849771.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:11.881Z,1478849771.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:12.249Z,1478849772.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:12.276Z,1478849772.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:12.649Z,1478849772.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:12.685Z,1478849772.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:13.049Z,1478849773.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:13.084Z,1478849773.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:13.453Z,1478849773.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:13.481Z,1478849773.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:13.849Z,1478849773.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:13.889Z,1478849773.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:14.256Z,1478849774.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:14.271Z,1478849774.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:14.653Z,1478849774.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:14.668Z,1478849774.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:15.052Z,1478849775.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:15.080Z,1478849775.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:15.453Z,1478849775.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:15.473Z,1478849775.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:15.860Z,1478849775.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:15.909Z,1478849775.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:16.249Z,1478849776.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:16.282Z,1478849776.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:16.649Z,1478849776.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:16.677Z,1478849776.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:17.049Z,1478849777.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:17.109Z,1478849777.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:17.449Z,1478849777.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:17.484Z,1478849777.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:17.849Z,1478849777.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:17.887Z,1478849777.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:18.249Z,1478849778.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:18.297Z,1478849778.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:18.649Z,1478849778.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:18.685Z,1478849778.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:19.049Z,1478849779.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:19.094Z,1478849779.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:19.449Z,1478849779.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:19.497Z,1478849779.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:19.849Z,1478849779.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:19.887Z,1478849779.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:20.249Z,1478849780.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:20.285Z,1478849780.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:20.649Z,1478849780.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:20.680Z,1478849780.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:21.049Z,1478849781.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:21.093Z,1478849781.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:21.449Z,1478849781.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:21.492Z,1478849781.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:21.849Z,1478849781.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:21.885Z,1478849781.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:25.109Z,1478849785.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:25.146Z,1478849785.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:25.233Z,1478849785.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:25.273Z,1478849785.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:25.606Z,1478849785.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:25.633Z,1478849785.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:25.999Z,1478849785.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:26.033Z,1478849786.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:26.411Z,1478849786.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:26.426Z,1478849786.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:26.799Z,1478849786.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:26.828Z,1478849786.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:27.199Z,1478849787.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:27.233Z,1478849787.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:27.599Z,1478849787.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:27.634Z,1478849787.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:28.003Z,1478849788.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:28.034Z,1478849788.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:28.403Z,1478849788.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:28.437Z,1478849788.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:28.828Z,1478849788.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:28.852Z,1478849788.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:29.209Z,1478849789.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:29.246Z,1478849789.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:29.600Z,1478849789.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:29.637Z,1478849789.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:30.005Z,1478849790.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:30.037Z,1478849790.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:30.400Z,1478849790.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:30.461Z,1478849790.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:30.805Z,1478849790.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:30.833Z,1478849790.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:31.205Z,1478849791.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:31.221Z,1478849791.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:31.607Z,1478849791.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:31.639Z,1478849791.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:32.014Z,1478849792.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:32.062Z,1478849792.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:32.415Z,1478849792.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:32.430Z,1478849792.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:32.820Z,1478849792.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:32.880Z,1478849792.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:33.197Z,1478849793.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:33.229Z,1478849793.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:33.613Z,1478849793.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:33.665Z,1478849793.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:34.009Z,1478849794.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:34.069Z,1478849794.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:34.428Z,1478849794.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:34.457Z,1478849794.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:34.800Z,1478849794.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:34.819Z,1478849794.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:35.202Z,1478849795.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:35.217Z,1478849795.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:35.608Z,1478849795.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:35.637Z,1478849795.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:35.999Z,1478849795.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:36.026Z,1478849796.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:36.405Z,1478849796.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:36.441Z,1478849796.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:36.799Z,1478849796.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:36.813Z,1478849796.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:37.202Z,1478849797.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:37.218Z,1478849797.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:37.603Z,1478849797.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:37.617Z,1478849797.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:38.007Z,1478849798.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:38.021Z,1478849798.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:38.405Z,1478849798.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:38.421Z,1478849798.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:38.809Z,1478849798.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:38.825Z,1478849798.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:39.206Z,1478849799.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:39.221Z,1478849799.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:39.606Z,1478849799.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:39.622Z,1478849799.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:40.011Z,1478849800.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:40.026Z,1478849800.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:40.399Z,1478849800.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:40.434Z,1478849800.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:40.799Z,1478849800.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:40.837Z,1478849800.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:41.199Z,1478849801.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:41.237Z,1478849801.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:41.599Z,1478849801.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:41.613Z,1478849801.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:41.999Z,1478849801.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:42.041Z,1478849802.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:42.407Z,1478849802.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:42.422Z,1478849802.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:42.807Z,1478849802.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:42.822Z,1478849802.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:43.206Z,1478849803.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:43.225Z,1478849803.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:43.601Z,1478849803.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:43.633Z,1478849803.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:44.006Z,1478849804.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:44.021Z,1478849804.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:44.406Z,1478849804.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:44.469Z,1478849804.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:44.799Z,1478849804.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:44.834Z,1478849804.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:45.203Z,1478849805.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:45.233Z,1478849805.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:45.628Z,1478849805.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:45.656Z,1478849805.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:46.014Z,1478849806.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:46.048Z,1478849806.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:46.404Z,1478849806.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:46.465Z,1478849806.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:46.808Z,1478849806.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:46.823Z,1478849806.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:47.209Z,1478849807.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:47.259Z,1478849807.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:47.611Z,1478849807.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:47.633Z,1478849807.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:48.005Z,1478849808.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:48.053Z,1478849808.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:48.401Z,1478849808.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:48.453Z,1478849808.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:48.811Z,1478849808.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:48.849Z,1478849808.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:49.215Z,1478849809.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:49.231Z,1478849809.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:49.629Z,1478849809.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:49.668Z,1478849809.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:50.005Z,1478849810.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:50.025Z,1478849810.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:50.414Z,1478849810.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:50.429Z,1478849810.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:50.820Z,1478849810.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:50.836Z,1478849810.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:51.220Z,1478849811.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:51.249Z,1478849811.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:51.604Z,1478849811.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:51.630Z,1478849811.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:52.003Z,1478849812.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:52.018Z,1478849812.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:52.406Z,1478849812.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:52.421Z,1478849812.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:52.803Z,1478849812.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:52.818Z,1478849812.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:53.213Z,1478849813.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:53.233Z,1478849813.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:53.607Z,1478849813.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:53.621Z,1478849813.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:54.009Z,1478849814.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:54.024Z,1478849814.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:54.407Z,1478849814.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:54.426Z,1478849814.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:54.799Z,1478849814.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:54.839Z,1478849814.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:55.204Z,1478849815.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:55.237Z,1478849815.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:55.599Z,1478849815.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:55.627Z,1478849815.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:55.999Z,1478849815.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:56.014Z,1478849816.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:56.399Z,1478849816.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:56.415Z,1478849816.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:56.799Z,1478849816.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:56.818Z,1478849816.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:57.207Z,1478849817.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:57.223Z,1478849817.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:57.607Z,1478849817.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:57.626Z,1478849817.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:58.000Z,1478849818.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:58.028Z,1478849818.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:58.406Z,1478849818.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:58.421Z,1478849818.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:58.811Z,1478849818.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:58.861Z,1478849818.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:59.199Z,1478849819.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:59.233Z,1478849819.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:59.599Z,1478849819.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:36:59.637Z,1478849819.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:36:59.999Z,1478849819.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:00.026Z,1478849820.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:00.399Z,1478849820.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:00.437Z,1478849820.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:00.799Z,1478849820.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:00.858Z,1478849820.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:01.206Z,1478849821.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:01.221Z,1478849821.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:01.606Z,1478849821.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:01.654Z,1478849821.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:02.003Z,1478849822.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:02.037Z,1478849822.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:02.417Z,1478849822.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:02.472Z,1478849822.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:02.811Z,1478849822.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:02.860Z,1478849822.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:03.208Z,1478849823.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:03.223Z,1478849823.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:03.607Z,1478849823.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:03.626Z,1478849823.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:04.011Z,1478849824.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:04.026Z,1478849824.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:04.399Z,1478849824.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:04.433Z,1478849824.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:04.799Z,1478849824.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:04.834Z,1478849824.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:05.205Z,1478849825.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:05.240Z,1478849825.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:05.607Z,1478849825.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:05.641Z,1478849825.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:06.024Z,1478849826.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:06.052Z,1478849826.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:06.397Z,1478849826.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:06.417Z,1478849826.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:06.810Z,1478849826.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:06.847Z,1478849826.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:07.213Z,1478849827.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:07.244Z,1478849827.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:07.638Z,1478849827.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:07.665Z,1478849827.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:08.016Z,1478849828.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:08.049Z,1478849828.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:08.402Z,1478849828.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:08.418Z,1478849828.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:08.810Z,1478849828.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:08.856Z,1478849828.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:09.202Z,1478849829.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:09.221Z,1478849829.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:09.607Z,1478849829.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:09.622Z,1478849829.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:10.006Z,1478849830.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:10.025Z,1478849830.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:10.401Z,1478849830.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:10.424Z,1478849830.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:10.811Z,1478849830.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:10.826Z,1478849830.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:11.199Z,1478849831.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:11.224Z,1478849831.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:11.599Z,1478849831.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:11.633Z,1478849831.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:11.999Z,1478849831.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:12.014Z,1478849832.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:12.399Z,1478849832.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:12.437Z,1478849832.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:12.802Z,1478849832.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:12.821Z,1478849832.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:13.209Z,1478849833.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:13.233Z,1478849833.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:13.602Z,1478849833.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:13.656Z,1478849833.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:14.005Z,1478849834.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:14.020Z,1478849834.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:14.409Z,1478849834.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:14.429Z,1478849834.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:14.806Z,1478849834.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:14.842Z,1478849834.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:15.207Z,1478849835.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:15.241Z,1478849835.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:15.599Z,1478849835.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:15.666Z,1478849835.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:16.003Z,1478849836.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:16.028Z,1478849836.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:16.403Z,1478849836.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:16.468Z,1478849836.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:16.799Z,1478849836.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:16.854Z,1478849836.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:17.199Z,1478849837.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:17.226Z,1478849837.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:17.599Z,1478849837.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:17.614Z,1478849837.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:17.999Z,1478849837.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:18.014Z,1478849838.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:18.403Z,1478849838.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:18.449Z,1478849838.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:18.827Z,1478849838.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:18.878Z,1478849838.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:19.211Z,1478849839.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:19.238Z,1478849839.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:19.609Z,1478849839.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:19.629Z,1478849839.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:20.012Z,1478849840.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:20.027Z,1478849840.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:20.412Z,1478849840.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:20.428Z,1478849840.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:20.799Z,1478849840.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:20.833Z,1478849840.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:21.211Z,1478849841.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:21.234Z,1478849841.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:21.243Z,1478849841.243 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T07:37:21.244Z,1478849841.244 [Default:CheckIn:C.Wait] Stopped
2016-11-11T07:37:21.244Z,1478849841.244 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T07:37:21.244Z,1478849841.244 [Default:CheckIn:D] Running Loop=1
2016-11-11T07:37:21.606Z,1478849841.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:21.640Z,1478849841.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:21.662Z,1478849841.662 [Default:CheckIn:D] Stopped
2016-11-11T07:37:21.662Z,1478849841.662 [Default:CheckIn:E] Running Loop=1
2016-11-11T07:37:22.014Z,1478849842.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:22.039Z,1478849842.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:22.048Z,1478849842.048 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 167.339193 min 
2016-11-11T07:37:22.048Z,1478849842.048 [Default:CheckIn:E] Stopped
2016-11-11T07:37:22.049Z,1478849842.049 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T07:37:22.049Z,1478849842.049 [Default:CheckIn] Stopped
2016-11-11T07:37:22.049Z,1478849842.049 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T07:37:22.049Z,1478849842.049 [Default:CheckIn](INFO): Running loop #17
2016-11-11T07:37:22.049Z,1478849842.049 [Default:CheckIn] Running Loop=17
2016-11-11T07:37:22.049Z,1478849842.049 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T07:37:22.049Z,1478849842.049 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T07:37:25.440Z,1478849845.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:25.455Z,1478849845.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:25.548Z,1478849845.548 [NAL9602](INFO): Powering up
2016-11-11T07:37:25.566Z,1478849845.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:25.605Z,1478849845.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:25.937Z,1478849845.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:25.960Z,1478849845.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:26.329Z,1478849846.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:26.361Z,1478849846.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:26.742Z,1478849846.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:26.761Z,1478849846.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:27.133Z,1478849847.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:27.165Z,1478849847.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:27.534Z,1478849847.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:27.577Z,1478849847.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:27.929Z,1478849847.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:27.965Z,1478849847.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:28.329Z,1478849848.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:28.358Z,1478849848.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:28.729Z,1478849848.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:28.787Z,1478849848.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:29.129Z,1478849849.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:29.153Z,1478849849.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:29.532Z,1478849849.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:29.591Z,1478849849.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:29.935Z,1478849849.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:29.958Z,1478849849.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:30.333Z,1478849850.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:30.381Z,1478849850.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:30.736Z,1478849850.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:30.757Z,1478849850.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:31.136Z,1478849851.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:31.189Z,1478849851.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:31.536Z,1478849851.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:31.551Z,1478849851.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:31.936Z,1478849851.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:31.971Z,1478849851.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:32.337Z,1478849852.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:32.357Z,1478849852.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:32.729Z,1478849852.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:32.761Z,1478849852.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:33.129Z,1478849853.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:33.170Z,1478849853.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:33.529Z,1478849853.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:33.569Z,1478849853.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:33.929Z,1478849853.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:33.954Z,1478849853.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:34.337Z,1478849854.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:34.369Z,1478849854.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:34.729Z,1478849854.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:34.765Z,1478849854.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:35.129Z,1478849855.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:35.160Z,1478849855.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:35.534Z,1478849855.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:35.549Z,1478849855.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:35.936Z,1478849855.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:36.014Z,1478849856.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:36.347Z,1478849856.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:36.362Z,1478849856.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:36.713Z,1478849856.713 [NAL9602](INFO): NAL9602 initialized
2016-11-11T07:37:36.730Z,1478849856.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:36.765Z,1478849856.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:37.129Z,1478849857.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:37.172Z,1478849857.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:37.513Z,1478849857.513 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T07:37:37.513Z,1478849857.513 [NAL9602] Data Fault, FailCount= 2
2016-11-11T07:37:37.513Z,1478849857.513 [NAL9602](ERROR): Data Fault
2016-11-11T07:37:37.530Z,1478849857.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:37.545Z,1478849857.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:37.593Z,1478849857.593 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T07:37:37.912Z,1478849857.912 [NAL9602](INFO): Powering down
2016-11-11T07:37:37.930Z,1478849857.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:37.978Z,1478849857.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:38.336Z,1478849858.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:38.357Z,1478849858.357 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:38.357Z,1478849858.357 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2016-11-11T07:37:38.357Z,1478849858.357 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:37:38.419Z,1478849858.419 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:38.419Z,1478849858.419 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 37
2016-11-11T07:37:38.419Z,1478849858.419 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:37:38.441Z,1478849858.441 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:37:38.441Z,1478849858.441 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:37:38.732Z,1478849858.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:38.819Z,1478849858.819 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:37:38.823Z,1478849858.823 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2016-11-11T07:37:38.824Z,1478849858.824 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:37:38.825Z,1478849858.825 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 37
2016-11-11T07:37:38.825Z,1478849858.825 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T07:37:38.826Z,1478849858.826 [NAL9602] No Fault, FailCount= 2
2016-11-11T07:37:39.135Z,1478849859.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:39.149Z,1478849859.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:37:39.149Z,1478849859.149 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:37:39.150Z,1478849859.150 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:37:39.154Z,1478849859.154 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:37:39.155Z,1478849859.155 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:37:39.155Z,1478849859.155 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:37:39.529Z,1478849859.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:39.548Z,1478849859.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:37:39.549Z,1478849859.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:39.977Z,1478849859.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:40.020Z,1478849860.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2016-11-11T07:37:40.021Z,1478849860.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:40.329Z,1478849860.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:40.356Z,1478849860.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:37:40.357Z,1478849860.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:40.735Z,1478849860.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:40.757Z,1478849860.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:37:40.758Z,1478849860.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:41.140Z,1478849861.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:41.161Z,1478849861.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:37:41.162Z,1478849861.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:41.169Z,1478849861.169 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:41.169Z,1478849861.169 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 37
2016-11-11T07:37:41.169Z,1478849861.169 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:37:41.199Z,1478849861.200 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:37:41.529Z,1478849861.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:41.564Z,1478849861.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:37:41.565Z,1478849861.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:41.608Z,1478849861.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:37:41.608Z,1478849861.608 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 37
2016-11-11T07:37:41.929Z,1478849861.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:41.964Z,1478849861.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:37:41.965Z,1478849861.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:41.971Z,1478849861.971 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:37:41.972Z,1478849861.972 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:37:41.972Z,1478849861.972 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:37:42.329Z,1478849862.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:42.365Z,1478849862.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:37:42.366Z,1478849862.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:42.729Z,1478849862.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:42.764Z,1478849862.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:37:42.765Z,1478849862.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:43.113Z,1478849863.113 [NAL9602](INFO): Powering up NAL9602
2016-11-11T07:37:43.130Z,1478849863.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:43.175Z,1478849863.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:37:43.176Z,1478849863.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:43.533Z,1478849863.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:43.591Z,1478849863.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:37:43.596Z,1478849863.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:43.929Z,1478849863.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:44.030Z,1478849864.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2016-11-11T07:37:44.031Z,1478849864.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:44.329Z,1478849864.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:44.348Z,1478849864.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:37:44.349Z,1478849864.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:44.729Z,1478849864.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:44.787Z,1478849864.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:37:44.788Z,1478849864.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:45.136Z,1478849865.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:45.150Z,1478849865.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T07:37:45.176Z,1478849865.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:45.532Z,1478849865.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:45.586Z,1478849865.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T07:37:45.587Z,1478849865.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:45.933Z,1478849865.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:45.948Z,1478849865.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T07:37:45.949Z,1478849865.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:46.329Z,1478849866.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:46.380Z,1478849866.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T07:37:46.381Z,1478849866.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:46.733Z,1478849866.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:46.752Z,1478849866.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T07:37:46.753Z,1478849866.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:47.132Z,1478849867.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:47.147Z,1478849867.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T07:37:47.148Z,1478849867.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:47.536Z,1478849867.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:47.550Z,1478849867.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T07:37:47.551Z,1478849867.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:47.932Z,1478849867.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:47.956Z,1478849867.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T07:37:47.957Z,1478849867.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:48.335Z,1478849868.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:48.350Z,1478849868.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T07:37:48.351Z,1478849868.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:48.736Z,1478849868.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:48.750Z,1478849868.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T07:37:48.751Z,1478849868.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:49.140Z,1478849869.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:49.155Z,1478849869.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T07:37:49.156Z,1478849869.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:49.529Z,1478849869.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:49.560Z,1478849869.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T07:37:49.561Z,1478849869.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:49.930Z,1478849869.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:49.965Z,1478849869.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T07:37:49.966Z,1478849869.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:50.333Z,1478849870.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:50.358Z,1478849870.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T07:37:50.359Z,1478849870.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:50.729Z,1478849870.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:50.752Z,1478849870.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T07:37:50.753Z,1478849870.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:51.129Z,1478849871.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:51.164Z,1478849871.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T07:37:51.165Z,1478849871.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:51.529Z,1478849871.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:51.564Z,1478849871.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T07:37:51.565Z,1478849871.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:51.934Z,1478849871.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:51.949Z,1478849871.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T07:37:51.950Z,1478849871.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:52.336Z,1478849872.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:52.356Z,1478849872.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T07:37:52.357Z,1478849872.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:52.733Z,1478849872.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:52.748Z,1478849872.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T07:37:52.749Z,1478849872.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:53.137Z,1478849873.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:53.152Z,1478849873.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T07:37:53.153Z,1478849873.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:53.540Z,1478849873.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:53.555Z,1478849873.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T07:37:53.556Z,1478849873.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:53.913Z,1478849873.913 [NAL9602](INFO): NAL9602 initialized
2016-11-11T07:37:53.932Z,1478849873.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:53.965Z,1478849873.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T07:37:53.966Z,1478849873.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:54.337Z,1478849874.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:54.352Z,1478849874.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T07:37:54.353Z,1478849874.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:54.747Z,1478849874.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:54.762Z,1478849874.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T07:37:54.763Z,1478849874.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:55.153Z,1478849875.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:55.173Z,1478849875.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T07:37:55.174Z,1478849875.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:55.548Z,1478849875.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:55.562Z,1478849875.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T07:37:55.584Z,1478849875.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:55.933Z,1478849875.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:55.956Z,1478849875.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T07:37:55.957Z,1478849875.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:56.340Z,1478849876.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:56.354Z,1478849876.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T07:37:56.356Z,1478849876.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:56.739Z,1478849876.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:56.764Z,1478849876.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T07:37:56.765Z,1478849876.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:57.148Z,1478849877.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:57.167Z,1478849877.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T07:37:57.168Z,1478849877.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:57.548Z,1478849877.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:57.578Z,1478849877.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T07:37:57.580Z,1478849877.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:57.944Z,1478849877.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:58.003Z,1478849878.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T07:37:58.004Z,1478849878.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:58.332Z,1478849878.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:58.417Z,1478849878.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:58.738Z,1478849878.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:58.753Z,1478849878.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:59.135Z,1478849879.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:59.200Z,1478849879.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:59.535Z,1478849879.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:37:59.577Z,1478849879.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:37:59.940Z,1478849879.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:00.008Z,1478849880.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:00.331Z,1478849880.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:00.400Z,1478849880.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:00.730Z,1478849880.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:00.778Z,1478849880.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:01.145Z,1478849881.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:01.191Z,1478849881.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:01.541Z,1478849881.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:01.560Z,1478849881.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:01.954Z,1478849881.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:01.978Z,1478849881.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:02.342Z,1478849882.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:02.362Z,1478849882.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:02.746Z,1478849882.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:02.798Z,1478849882.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:03.150Z,1478849883.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:03.177Z,1478849883.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:03.530Z,1478849883.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:03.562Z,1478849883.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:03.931Z,1478849883.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:03.975Z,1478849883.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:04.331Z,1478849884.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:04.351Z,1478849884.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:04.740Z,1478849884.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:04.764Z,1478849884.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:05.141Z,1478849885.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:05.166Z,1478849885.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:05.529Z,1478849885.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:05.565Z,1478849885.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:05.960Z,1478849885.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:05.993Z,1478849885.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:06.329Z,1478849886.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:06.389Z,1478849886.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:06.737Z,1478849886.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:06.753Z,1478849886.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:07.150Z,1478849887.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:07.166Z,1478849887.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:07.567Z,1478849887.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:07.610Z,1478849887.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:07.972Z,1478849887.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:08.021Z,1478849888.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:08.348Z,1478849888.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:08.400Z,1478849888.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:08.738Z,1478849888.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:08.753Z,1478849888.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:09.140Z,1478849889.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:09.197Z,1478849889.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:09.540Z,1478849889.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:09.570Z,1478849889.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:09.935Z,1478849889.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:09.973Z,1478849889.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:10.337Z,1478849890.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:10.357Z,1478849890.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:10.755Z,1478849890.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:10.797Z,1478849890.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:11.130Z,1478849891.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:11.159Z,1478849891.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:11.529Z,1478849891.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:11.561Z,1478849891.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:11.929Z,1478849891.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:11.949Z,1478849891.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:12.359Z,1478849892.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:12.445Z,1478849892.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:12.740Z,1478849892.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:12.780Z,1478849892.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:13.183Z,1478849893.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:13.285Z,1478849893.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:13.544Z,1478849893.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:13.604Z,1478849893.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:13.940Z,1478849893.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:14.009Z,1478849894.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:14.331Z,1478849894.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:14.387Z,1478849894.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:14.731Z,1478849894.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:14.766Z,1478849894.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:15.131Z,1478849895.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:15.151Z,1478849895.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:15.536Z,1478849895.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:15.566Z,1478849895.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:15.940Z,1478849895.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:15.967Z,1478849895.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:16.340Z,1478849896.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:16.364Z,1478849896.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:16.731Z,1478849896.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:16.760Z,1478849896.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:17.131Z,1478849897.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:17.173Z,1478849897.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:17.552Z,1478849897.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:17.600Z,1478849897.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:17.947Z,1478849897.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:18.009Z,1478849898.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:18.349Z,1478849898.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:18.394Z,1478849898.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:18.755Z,1478849898.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:18.817Z,1478849898.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:19.129Z,1478849899.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:19.181Z,1478849899.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:19.531Z,1478849899.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:19.565Z,1478849899.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:19.932Z,1478849899.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:19.980Z,1478849899.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:20.331Z,1478849900.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:20.378Z,1478849900.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:20.737Z,1478849900.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:20.764Z,1478849900.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:21.139Z,1478849901.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:21.196Z,1478849901.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:21.538Z,1478849901.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:21.566Z,1478849901.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:21.941Z,1478849901.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:21.977Z,1478849901.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:22.332Z,1478849902.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:22.366Z,1478849902.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:25.920Z,1478849905.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:25.936Z,1478849905.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:26.059Z,1478849906.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:26.075Z,1478849906.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:26.434Z,1478849906.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:26.497Z,1478849906.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:26.840Z,1478849906.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:26.901Z,1478849906.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:27.217Z,1478849907.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:27.243Z,1478849907.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:27.619Z,1478849907.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:27.645Z,1478849907.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:28.023Z,1478849908.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:28.102Z,1478849908.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:28.444Z,1478849908.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:28.463Z,1478849908.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:28.817Z,1478849908.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:28.858Z,1478849908.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:29.218Z,1478849909.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:29.269Z,1478849909.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:29.626Z,1478849909.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:29.652Z,1478849909.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:30.022Z,1478849910.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:30.061Z,1478849910.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:30.418Z,1478849910.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:30.433Z,1478849910.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:30.832Z,1478849910.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:30.867Z,1478849910.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:31.228Z,1478849911.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:31.262Z,1478849911.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:31.632Z,1478849911.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:31.658Z,1478849911.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:32.028Z,1478849912.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:32.056Z,1478849912.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:32.425Z,1478849912.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:32.454Z,1478849912.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:32.818Z,1478849912.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:32.861Z,1478849912.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:33.230Z,1478849913.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:33.255Z,1478849913.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:33.617Z,1478849913.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:33.660Z,1478849913.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:34.018Z,1478849914.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:34.064Z,1478849914.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:34.417Z,1478849914.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:34.457Z,1478849914.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:34.822Z,1478849914.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:34.836Z,1478849914.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:35.226Z,1478849915.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:35.241Z,1478849915.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:35.623Z,1478849915.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:35.646Z,1478849915.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:36.034Z,1478849916.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:36.057Z,1478849916.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:36.432Z,1478849916.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:36.447Z,1478849916.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:36.837Z,1478849916.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:36.852Z,1478849916.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:37.231Z,1478849917.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:37.253Z,1478849917.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:37.622Z,1478849917.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:37.650Z,1478849917.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:38.017Z,1478849918.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:38.049Z,1478849918.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:38.417Z,1478849918.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:38.457Z,1478849918.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:38.825Z,1478849918.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:38.840Z,1478849918.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:39.228Z,1478849919.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:39.243Z,1478849919.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:39.632Z,1478849919.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:39.647Z,1478849919.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:40.028Z,1478849920.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:40.056Z,1478849920.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:40.417Z,1478849920.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:40.449Z,1478849920.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:40.817Z,1478849920.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:40.853Z,1478849920.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:41.253Z,1478849921.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:41.365Z,1478849921.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:41.628Z,1478849921.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:41.659Z,1478849921.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:42.035Z,1478849922.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:42.059Z,1478849922.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:42.432Z,1478849922.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:42.481Z,1478849922.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:42.822Z,1478849922.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:42.845Z,1478849922.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:43.224Z,1478849923.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:43.271Z,1478849923.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:43.620Z,1478849923.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:43.669Z,1478849923.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:44.020Z,1478849924.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:44.053Z,1478849924.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:44.420Z,1478849924.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:44.457Z,1478849924.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:44.823Z,1478849924.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:44.851Z,1478849924.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:45.235Z,1478849925.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:45.261Z,1478849925.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:45.617Z,1478849925.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:45.651Z,1478849925.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:46.018Z,1478849926.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:46.045Z,1478849926.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:46.435Z,1478849926.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:46.458Z,1478849926.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:46.849Z,1478849926.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:46.869Z,1478849926.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:47.243Z,1478849927.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:47.259Z,1478849927.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:47.632Z,1478849927.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:47.660Z,1478849927.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:48.017Z,1478849928.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:48.052Z,1478849928.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:48.418Z,1478849928.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:48.453Z,1478849928.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:48.817Z,1478849928.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:48.857Z,1478849928.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:49.222Z,1478849929.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:49.237Z,1478849929.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:49.618Z,1478849929.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:49.641Z,1478849929.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:50.020Z,1478849930.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:50.046Z,1478849930.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:50.424Z,1478849930.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:50.453Z,1478849930.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:50.828Z,1478849930.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:50.844Z,1478849930.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:51.221Z,1478849931.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:51.244Z,1478849931.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:51.636Z,1478849931.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:51.673Z,1478849931.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:52.040Z,1478849932.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:52.056Z,1478849932.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:52.440Z,1478849932.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:52.469Z,1478849932.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:52.836Z,1478849932.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:52.858Z,1478849932.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:53.218Z,1478849933.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:53.253Z,1478849933.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:53.617Z,1478849933.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:53.657Z,1478849933.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:54.017Z,1478849934.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:54.053Z,1478849934.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:54.418Z,1478849934.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:54.437Z,1478849934.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:54.822Z,1478849934.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:54.837Z,1478849934.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:55.225Z,1478849935.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:55.240Z,1478849935.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:55.624Z,1478849935.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:55.701Z,1478849935.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:56.020Z,1478849936.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:56.053Z,1478849936.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:56.421Z,1478849936.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:56.474Z,1478849936.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:56.840Z,1478849936.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:56.854Z,1478849936.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:57.232Z,1478849937.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:57.286Z,1478849937.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:57.640Z,1478849937.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:57.688Z,1478849937.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:58.042Z,1478849938.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:58.090Z,1478849938.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:58.418Z,1478849938.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:58.449Z,1478849938.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:58.823Z,1478849938.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:58.845Z,1478849938.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:59.226Z,1478849939.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:59.241Z,1478849939.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:38:59.620Z,1478849939.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:38:59.652Z,1478849939.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:00.017Z,1478849940.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:00.051Z,1478849940.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:00.417Z,1478849940.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:00.442Z,1478849940.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:00.817Z,1478849940.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:00.854Z,1478849940.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:01.217Z,1478849941.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:01.253Z,1478849941.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:01.617Z,1478849941.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:01.640Z,1478849941.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:02.043Z,1478849942.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:02.070Z,1478849942.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:02.428Z,1478849942.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:02.456Z,1478849942.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:02.835Z,1478849942.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:02.860Z,1478849942.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:03.236Z,1478849943.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:03.265Z,1478849943.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:03.632Z,1478849943.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:03.669Z,1478849943.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:04.022Z,1478849944.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:04.041Z,1478849944.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:04.425Z,1478849944.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:04.440Z,1478849944.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:04.825Z,1478849944.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:04.845Z,1478849944.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:05.226Z,1478849945.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:05.245Z,1478849945.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:05.620Z,1478849945.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:05.645Z,1478849945.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:06.029Z,1478849946.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:06.045Z,1478849946.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:06.417Z,1478849946.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:06.453Z,1478849946.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:06.830Z,1478849946.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:06.845Z,1478849946.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:07.240Z,1478849947.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:07.254Z,1478849947.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:07.644Z,1478849947.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:07.659Z,1478849947.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:08.036Z,1478849948.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:08.059Z,1478849948.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:08.436Z,1478849948.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:08.457Z,1478849948.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:08.817Z,1478849948.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:08.845Z,1478849948.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:09.221Z,1478849949.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:09.257Z,1478849949.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:09.617Z,1478849949.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:09.689Z,1478849949.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:10.025Z,1478849950.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:10.040Z,1478849950.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:10.424Z,1478849950.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:10.440Z,1478849950.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:10.824Z,1478849950.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:10.879Z,1478849950.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:11.226Z,1478849951.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:11.240Z,1478849951.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:11.620Z,1478849951.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:11.667Z,1478849951.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:12.024Z,1478849952.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:12.079Z,1478849952.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:12.435Z,1478849952.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:12.453Z,1478849952.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:12.830Z,1478849952.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:12.861Z,1478849952.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:13.238Z,1478849953.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:13.257Z,1478849953.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:13.640Z,1478849953.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:13.655Z,1478849953.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:14.018Z,1478849954.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:14.049Z,1478849954.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:14.417Z,1478849954.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:14.453Z,1478849954.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:14.841Z,1478849954.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:14.895Z,1478849954.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:15.233Z,1478849955.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:15.264Z,1478849955.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:15.629Z,1478849955.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:15.661Z,1478849955.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:16.021Z,1478849956.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:16.041Z,1478849956.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:16.425Z,1478849956.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:16.440Z,1478849956.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:16.828Z,1478849956.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:16.849Z,1478849956.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:17.226Z,1478849957.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:17.241Z,1478849957.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:17.634Z,1478849957.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:17.654Z,1478849957.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:18.039Z,1478849958.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:18.054Z,1478849958.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:18.440Z,1478849958.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:18.456Z,1478849958.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:18.850Z,1478849958.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:18.873Z,1478849958.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:19.217Z,1478849959.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:19.257Z,1478849959.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:19.625Z,1478849959.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:19.645Z,1478849959.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:20.026Z,1478849960.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:20.041Z,1478849960.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:20.433Z,1478849960.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:20.481Z,1478849960.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:20.817Z,1478849960.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:20.849Z,1478849960.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:21.217Z,1478849961.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:21.250Z,1478849961.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:21.617Z,1478849961.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:21.653Z,1478849961.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:22.018Z,1478849962.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:22.055Z,1478849962.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:22.418Z,1478849962.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:22.445Z,1478849962.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:25.707Z,1478849965.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:25.803Z,1478849965.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:25.909Z,1478849965.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:25.933Z,1478849965.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:26.272Z,1478849966.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:26.287Z,1478849966.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:26.673Z,1478849966.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:26.693Z,1478849966.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:27.057Z,1478849967.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:27.111Z,1478849967.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:27.457Z,1478849967.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:27.493Z,1478849967.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:27.864Z,1478849967.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:27.917Z,1478849967.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:28.254Z,1478849968.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:28.316Z,1478849968.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:28.663Z,1478849968.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:28.677Z,1478849968.677 [PNI_TCM](ERROR): CRC does not match. Expected:0x13171 got:0x16843
2016-11-11T07:39:28.705Z,1478849968.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:29.056Z,1478849969.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:29.084Z,1478849969.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:29.454Z,1478849969.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:29.489Z,1478849969.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:29.858Z,1478849969.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:29.887Z,1478849969.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:30.256Z,1478849970.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:30.289Z,1478849970.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:30.672Z,1478849970.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:30.697Z,1478849970.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:31.064Z,1478849971.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:31.087Z,1478849971.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:31.470Z,1478849971.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:31.493Z,1478849971.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:31.866Z,1478849971.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:31.881Z,1478849971.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:32.265Z,1478849972.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:32.285Z,1478849972.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:32.661Z,1478849972.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:32.676Z,1478849972.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:33.058Z,1478849973.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:33.087Z,1478849973.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:33.464Z,1478849973.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:33.492Z,1478849973.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:33.855Z,1478849973.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:33.890Z,1478849973.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:34.254Z,1478849974.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:34.279Z,1478849974.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:34.663Z,1478849974.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:34.686Z,1478849974.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:35.065Z,1478849975.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:35.080Z,1478849975.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:35.455Z,1478849975.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:35.480Z,1478849975.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:35.879Z,1478849975.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:35.894Z,1478849975.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:36.276Z,1478849976.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:36.298Z,1478849976.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:36.668Z,1478849976.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:36.701Z,1478849976.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:37.068Z,1478849977.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:37.095Z,1478849977.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:37.453Z,1478849977.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:37.473Z,1478849977.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:37.856Z,1478849977.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:37.877Z,1478849977.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:38.265Z,1478849978.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:38.280Z,1478849978.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:38.661Z,1478849978.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:38.681Z,1478849978.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:39.058Z,1478849979.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:39.085Z,1478849979.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:39.464Z,1478849979.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:39.479Z,1478849979.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:39.855Z,1478849979.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:39.887Z,1478849979.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:40.253Z,1478849980.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:40.325Z,1478849980.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:40.661Z,1478849980.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:40.697Z,1478849980.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:41.068Z,1478849981.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:41.121Z,1478849981.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:41.472Z,1478849981.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:41.495Z,1478849981.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:41.872Z,1478849981.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:41.944Z,1478849981.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:42.268Z,1478849982.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:42.321Z,1478849982.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:42.660Z,1478849982.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:42.691Z,1478849982.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:43.058Z,1478849983.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:43.077Z,1478849983.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:43.461Z,1478849983.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:43.476Z,1478849983.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:43.857Z,1478849983.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:43.880Z,1478849983.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:44.267Z,1478849984.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:44.290Z,1478849984.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:44.654Z,1478849984.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:44.686Z,1478849984.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:45.053Z,1478849985.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:45.085Z,1478849985.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:45.457Z,1478849985.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:45.483Z,1478849985.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:45.856Z,1478849985.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:45.881Z,1478849985.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:46.272Z,1478849986.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:46.300Z,1478849986.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:46.675Z,1478849986.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:46.690Z,1478849986.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:47.077Z,1478849987.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:47.092Z,1478849987.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:47.472Z,1478849987.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:47.503Z,1478849987.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:47.853Z,1478849987.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:47.889Z,1478849987.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:48.258Z,1478849988.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:48.283Z,1478849988.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:48.658Z,1478849988.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:48.673Z,1478849988.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:49.062Z,1478849989.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:49.107Z,1478849989.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:49.462Z,1478849989.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:49.477Z,1478849989.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:49.856Z,1478849989.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:49.884Z,1478849989.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:50.256Z,1478849990.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:50.288Z,1478849990.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:50.664Z,1478849990.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:50.691Z,1478849990.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:51.066Z,1478849991.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:51.082Z,1478849991.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:51.479Z,1478849991.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:51.494Z,1478849991.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:51.876Z,1478849991.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:51.891Z,1478849991.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:52.272Z,1478849992.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:52.305Z,1478849992.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:52.685Z,1478849992.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:52.705Z,1478849992.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:53.054Z,1478849993.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:53.089Z,1478849993.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:53.459Z,1478849993.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:53.483Z,1478849993.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:53.856Z,1478849993.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:53.885Z,1478849993.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:54.262Z,1478849994.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:54.334Z,1478849994.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:54.653Z,1478849994.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:54.690Z,1478849994.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:55.053Z,1478849995.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:55.090Z,1478849995.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:55.453Z,1478849995.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:55.493Z,1478849995.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:55.853Z,1478849995.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:55.890Z,1478849995.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:56.253Z,1478849996.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:56.305Z,1478849996.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:56.677Z,1478849996.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:56.718Z,1478849996.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:57.064Z,1478849997.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:57.105Z,1478849997.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:57.467Z,1478849997.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:57.501Z,1478849997.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:57.868Z,1478849997.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:57.897Z,1478849997.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:58.257Z,1478849998.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:58.297Z,1478849998.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:58.653Z,1478849998.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:58.668Z,1478849998.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:59.057Z,1478849999.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:59.077Z,1478849999.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:59.457Z,1478849999.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:59.478Z,1478849999.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:39:59.860Z,1478849999.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:39:59.874Z,1478849999.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:00.261Z,1478850000.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:00.276Z,1478850000.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:00.656Z,1478850000.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:00.688Z,1478850000.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:01.061Z,1478850001.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:01.081Z,1478850001.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:01.453Z,1478850001.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:01.488Z,1478850001.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:01.875Z,1478850001.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:01.890Z,1478850001.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:02.270Z,1478850002.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:02.293Z,1478850002.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:02.677Z,1478850002.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:02.692Z,1478850002.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:03.068Z,1478850003.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:03.090Z,1478850003.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:03.453Z,1478850003.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:03.488Z,1478850003.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:03.853Z,1478850003.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:03.886Z,1478850003.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:04.253Z,1478850004.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:04.285Z,1478850004.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:04.657Z,1478850004.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:04.682Z,1478850004.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:05.053Z,1478850005.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:05.085Z,1478850005.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:05.453Z,1478850005.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:05.485Z,1478850005.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:05.853Z,1478850005.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:05.884Z,1478850005.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:06.258Z,1478850006.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:06.283Z,1478850006.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:06.654Z,1478850006.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:06.685Z,1478850006.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:07.075Z,1478850007.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:07.090Z,1478850007.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:07.463Z,1478850007.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:07.497Z,1478850007.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:07.880Z,1478850007.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:07.896Z,1478850007.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:08.279Z,1478850008.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:08.294Z,1478850008.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:08.653Z,1478850008.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:08.725Z,1478850008.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:09.056Z,1478850009.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:09.085Z,1478850009.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:09.460Z,1478850009.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:09.515Z,1478850009.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:09.862Z,1478850009.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:09.876Z,1478850009.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:10.256Z,1478850010.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:10.307Z,1478850010.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:10.664Z,1478850010.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:10.715Z,1478850010.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:11.062Z,1478850011.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:11.079Z,1478850011.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:11.457Z,1478850011.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:11.479Z,1478850011.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:11.860Z,1478850011.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:11.875Z,1478850011.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:12.275Z,1478850012.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:12.297Z,1478850012.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:12.670Z,1478850012.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:12.685Z,1478850012.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:13.075Z,1478850013.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:13.090Z,1478850013.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:13.479Z,1478850013.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:13.497Z,1478850013.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:13.853Z,1478850013.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:13.881Z,1478850013.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:14.253Z,1478850014.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:14.288Z,1478850014.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:14.654Z,1478850014.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:14.690Z,1478850014.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:15.053Z,1478850015.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:15.089Z,1478850015.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:15.453Z,1478850015.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:15.488Z,1478850015.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:15.854Z,1478850015.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:15.893Z,1478850015.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:16.253Z,1478850016.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:16.289Z,1478850016.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:16.653Z,1478850016.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:16.688Z,1478850016.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:17.054Z,1478850017.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:17.085Z,1478850017.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:17.468Z,1478850017.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:17.501Z,1478850017.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:17.864Z,1478850017.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:17.879Z,1478850017.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:18.268Z,1478850018.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:18.304Z,1478850018.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:18.664Z,1478850018.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:18.679Z,1478850018.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:19.056Z,1478850019.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:19.077Z,1478850019.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:19.461Z,1478850019.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:19.481Z,1478850019.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:19.856Z,1478850019.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:19.885Z,1478850019.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:20.268Z,1478850020.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:20.289Z,1478850020.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:20.664Z,1478850020.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:20.688Z,1478850020.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:21.065Z,1478850021.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:21.081Z,1478850021.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:21.453Z,1478850021.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:21.485Z,1478850021.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:21.854Z,1478850021.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:21.886Z,1478850021.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:22.257Z,1478850022.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:22.283Z,1478850022.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:22.680Z,1478850022.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:22.734Z,1478850022.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:26.090Z,1478850026.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:26.105Z,1478850026.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:26.213Z,1478850026.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:26.232Z,1478850026.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:26.597Z,1478850026.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:26.620Z,1478850026.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:26.998Z,1478850026.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:27.047Z,1478850027.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:27.392Z,1478850027.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:27.423Z,1478850027.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:27.792Z,1478850027.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:27.853Z,1478850027.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:28.185Z,1478850028.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:28.234Z,1478850028.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:28.585Z,1478850028.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:28.618Z,1478850028.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:28.991Z,1478850028.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:29.022Z,1478850029.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:29.385Z,1478850029.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:29.425Z,1478850029.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:29.785Z,1478850029.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:29.826Z,1478850029.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:30.185Z,1478850030.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:30.205Z,1478850030.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:30.591Z,1478850030.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:30.636Z,1478850030.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:30.000Z,1478850031.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:31.031Z,1478850031.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:31.400Z,1478850031.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:31.414Z,1478850031.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:31.803Z,1478850031.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:31.818Z,1478850031.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:32.200Z,1478850032.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:32.215Z,1478850032.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:32.592Z,1478850032.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:32.607Z,1478850032.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:32.993Z,1478850032.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:33.008Z,1478850033.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:33.388Z,1478850033.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:33.420Z,1478850033.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:33.793Z,1478850033.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:33.813Z,1478850033.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:34.185Z,1478850034.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:34.220Z,1478850034.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:34.585Z,1478850034.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:34.617Z,1478850034.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:34.985Z,1478850034.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:35.018Z,1478850035.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:35.385Z,1478850035.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:35.421Z,1478850035.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:35.788Z,1478850035.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:35.803Z,1478850035.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:36.199Z,1478850036.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:36.223Z,1478850036.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:36.596Z,1478850036.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:36.617Z,1478850036.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:37.000Z,1478850037.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:37.015Z,1478850037.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:37.396Z,1478850037.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:37.411Z,1478850037.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:37.796Z,1478850037.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:37.812Z,1478850037.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:38.188Z,1478850038.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:38.220Z,1478850038.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:38.588Z,1478850038.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:38.619Z,1478850038.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:38.988Z,1478850038.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:39.013Z,1478850039.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:39.385Z,1478850039.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:39.411Z,1478850039.411 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:39.411Z,1478850039.411 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2016-11-11T07:40:39.411Z,1478850039.411 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:40:39.418Z,1478850039.418 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:39.418Z,1478850039.418 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 38
2016-11-11T07:40:39.418Z,1478850039.418 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:40:39.434Z,1478850039.434 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:40:39.434Z,1478850039.434 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:40:39.785Z,1478850039.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:39.827Z,1478850039.827 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:40:39.827Z,1478850039.827 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2016-11-11T07:40:39.828Z,1478850039.828 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:40:39.828Z,1478850039.828 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 38
2016-11-11T07:40:40.185Z,1478850040.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:40.240Z,1478850040.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:40:40.240Z,1478850040.240 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:40:40.241Z,1478850040.241 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:40:40.265Z,1478850040.265 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:40:40.266Z,1478850040.266 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:40:40.266Z,1478850040.266 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:40:40.585Z,1478850040.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:40.641Z,1478850040.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:40:40.642Z,1478850040.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:40.985Z,1478850040.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:41.028Z,1478850041.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:40:41.029Z,1478850041.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:41.399Z,1478850041.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:41.433Z,1478850041.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:40:41.434Z,1478850041.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:41.796Z,1478850041.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:41.853Z,1478850041.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:40:41.854Z,1478850041.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:42.200Z,1478850042.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:42.229Z,1478850042.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:40:42.230Z,1478850042.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:42.237Z,1478850042.237 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:42.237Z,1478850042.237 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 38
2016-11-11T07:40:42.237Z,1478850042.237 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:40:42.251Z,1478850042.251 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:40:42.600Z,1478850042.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:42.648Z,1478850042.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:40:42.649Z,1478850042.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:42.703Z,1478850042.703 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:40:42.703Z,1478850042.703 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 38
2016-11-11T07:40:42.989Z,1478850042.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:43.041Z,1478850043.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:40:43.042Z,1478850043.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:43.048Z,1478850043.048 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:40:43.048Z,1478850043.048 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:40:43.049Z,1478850043.049 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:40:43.392Z,1478850043.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:43.412Z,1478850043.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:40:43.413Z,1478850043.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:43.789Z,1478850043.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:43.808Z,1478850043.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:40:43.809Z,1478850043.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:44.197Z,1478850044.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:44.217Z,1478850044.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:40:44.218Z,1478850044.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:44.595Z,1478850044.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:44.609Z,1478850044.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:40:44.610Z,1478850044.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:44.994Z,1478850044.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:45.008Z,1478850045.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:40:45.009Z,1478850045.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:45.388Z,1478850045.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:45.419Z,1478850045.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:40:45.420Z,1478850045.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:45.792Z,1478850045.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:45.806Z,1478850045.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:40:45.807Z,1478850045.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:46.198Z,1478850046.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:46.212Z,1478850046.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T07:40:46.213Z,1478850046.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:46.607Z,1478850046.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:46.622Z,1478850046.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T07:40:46.623Z,1478850046.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:47.003Z,1478850047.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:47.017Z,1478850047.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T07:40:47.018Z,1478850047.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:47.408Z,1478850047.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:47.423Z,1478850047.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T07:40:47.424Z,1478850047.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:47.800Z,1478850047.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:47.825Z,1478850047.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T07:40:47.826Z,1478850047.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:48.185Z,1478850048.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:48.220Z,1478850048.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T07:40:48.221Z,1478850048.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:48.586Z,1478850048.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:48.624Z,1478850048.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T07:40:48.625Z,1478850048.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:48.985Z,1478850048.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:49.016Z,1478850049.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T07:40:49.018Z,1478850049.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:49.385Z,1478850049.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:49.420Z,1478850049.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T07:40:49.421Z,1478850049.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:49.786Z,1478850049.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:49.818Z,1478850049.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T07:40:49.819Z,1478850049.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:50.185Z,1478850050.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:50.217Z,1478850050.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T07:40:50.218Z,1478850050.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:50.585Z,1478850050.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:50.620Z,1478850050.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T07:40:50.621Z,1478850050.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:50.986Z,1478850050.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:51.025Z,1478850051.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T07:40:51.026Z,1478850051.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:51.385Z,1478850051.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:51.425Z,1478850051.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T07:40:51.426Z,1478850051.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:51.799Z,1478850051.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:51.833Z,1478850051.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T07:40:51.834Z,1478850051.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:52.204Z,1478850052.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:52.238Z,1478850052.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T07:40:52.239Z,1478850052.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:52.600Z,1478850052.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:52.627Z,1478850052.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T07:40:52.629Z,1478850052.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:52.996Z,1478850052.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:53.028Z,1478850053.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T07:40:53.029Z,1478850053.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:53.390Z,1478850053.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:53.405Z,1478850053.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T07:40:53.406Z,1478850053.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:53.786Z,1478850053.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:53.800Z,1478850053.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T07:40:53.801Z,1478850053.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:54.190Z,1478850054.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:54.205Z,1478850054.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T07:40:54.206Z,1478850054.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:54.593Z,1478850054.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:54.613Z,1478850054.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T07:40:54.614Z,1478850054.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:54.989Z,1478850054.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:55.061Z,1478850055.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2016-11-11T07:40:55.062Z,1478850055.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:55.392Z,1478850055.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:55.407Z,1478850055.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T07:40:55.408Z,1478850055.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:55.798Z,1478850055.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:55.845Z,1478850055.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T07:40:55.846Z,1478850055.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:56.192Z,1478850056.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:56.207Z,1478850056.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T07:40:56.208Z,1478850056.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:56.600Z,1478850056.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:56.650Z,1478850056.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T07:40:56.651Z,1478850056.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:57.007Z,1478850057.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:57.061Z,1478850057.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2016-11-11T07:40:57.062Z,1478850057.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:57.403Z,1478850057.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:57.418Z,1478850057.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T07:40:57.419Z,1478850057.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:57.807Z,1478850057.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:57.829Z,1478850057.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T07:40:57.830Z,1478850057.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:58.208Z,1478850058.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:58.235Z,1478850058.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T07:40:58.236Z,1478850058.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:58.585Z,1478850058.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:58.621Z,1478850058.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T07:40:58.622Z,1478850058.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:58.985Z,1478850058.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:59.020Z,1478850059.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T07:40:59.021Z,1478850059.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:59.390Z,1478850059.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:59.421Z,1478850059.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:40:59.785Z,1478850059.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:40:59.825Z,1478850059.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:00.192Z,1478850060.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:00.207Z,1478850060.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:00.593Z,1478850060.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:00.629Z,1478850060.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:00.992Z,1478850060.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:01.007Z,1478850061.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:01.394Z,1478850061.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:01.408Z,1478850061.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:01.794Z,1478850061.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:01.816Z,1478850061.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:02.204Z,1478850062.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:02.226Z,1478850062.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:02.604Z,1478850062.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:02.625Z,1478850062.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:03.004Z,1478850063.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:03.032Z,1478850063.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:03.404Z,1478850063.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:03.426Z,1478850063.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:03.786Z,1478850063.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:03.822Z,1478850063.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:04.186Z,1478850064.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:04.221Z,1478850064.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:04.586Z,1478850064.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:04.621Z,1478850064.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:04.986Z,1478850064.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:05.001Z,1478850065.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:05.394Z,1478850065.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:05.430Z,1478850065.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:05.789Z,1478850065.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:05.809Z,1478850065.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:06.192Z,1478850066.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:06.208Z,1478850066.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:06.593Z,1478850066.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:06.613Z,1478850066.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:06.993Z,1478850066.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:07.010Z,1478850067.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:07.403Z,1478850067.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:07.425Z,1478850067.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:07.802Z,1478850067.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:07.818Z,1478850067.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:08.204Z,1478850068.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:08.227Z,1478850068.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:08.611Z,1478850068.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:08.628Z,1478850068.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:08.985Z,1478850068.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:09.068Z,1478850069.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:09.385Z,1478850069.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:09.421Z,1478850069.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:09.785Z,1478850069.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:09.834Z,1478850069.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:10.185Z,1478850070.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:10.221Z,1478850070.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:10.585Z,1478850070.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:10.633Z,1478850070.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:10.985Z,1478850070.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:11.021Z,1478850071.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:11.385Z,1478850071.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:11.430Z,1478850071.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:11.785Z,1478850071.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:11.821Z,1478850071.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:12.185Z,1478850072.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:12.220Z,1478850072.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:12.609Z,1478850072.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:12.629Z,1478850072.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:12.996Z,1478850072.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:13.023Z,1478850073.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:13.415Z,1478850073.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:13.433Z,1478850073.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:13.800Z,1478850073.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:13.825Z,1478850073.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:14.185Z,1478850074.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:14.221Z,1478850074.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:14.588Z,1478850074.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:14.603Z,1478850074.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:14.989Z,1478850074.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:15.009Z,1478850075.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:15.389Z,1478850075.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:15.404Z,1478850075.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:15.792Z,1478850075.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:15.807Z,1478850075.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:16.192Z,1478850076.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:16.207Z,1478850076.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:16.588Z,1478850076.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:16.618Z,1478850076.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:16.650Z,1478850076.650 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T07:41:16.650Z,1478850076.650 [Rowe_600LCM] No Fault, FailCount= 5
2016-11-11T07:41:16.983Z,1478850076.983 [Rowe_600LCM](INFO): Initializing
2016-11-11T07:41:16.984Z,1478850076.984 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T07:41:16.984Z,1478850076.984 [Rowe_600LCM](INFO): LCM OK
2016-11-11T07:41:16.984Z,1478850076.984 [Rowe_600LCM](INFO): Powering up
2016-11-11T07:41:16.995Z,1478850076.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:17.024Z,1478850077.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:17.385Z,1478850077.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:17.412Z,1478850077.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:17.809Z,1478850077.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:17.824Z,1478850077.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:18.203Z,1478850078.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:18.218Z,1478850078.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:18.609Z,1478850078.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:18.623Z,1478850078.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:19.008Z,1478850079.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:19.023Z,1478850079.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:19.385Z,1478850079.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:19.422Z,1478850079.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:19.790Z,1478850079.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:19.822Z,1478850079.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:20.197Z,1478850080.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:20.212Z,1478850080.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:20.592Z,1478850080.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:20.607Z,1478850080.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:20.993Z,1478850080.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:21.008Z,1478850081.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:21.177Z,1478850081.177 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T07:41:21.247Z,1478850081.247 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T07:41:21.248Z,1478850081.248 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T07:41:21.249Z,1478850081.249 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T07:41:21.250Z,1478850081.250 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T07:41:21.396Z,1478850081.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:21.432Z,1478850081.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:21.785Z,1478850081.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:21.817Z,1478850081.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:22.186Z,1478850082.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:22.222Z,1478850082.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:22.590Z,1478850082.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:22.616Z,1478850082.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:23.008Z,1478850083.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:23.036Z,1478850083.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:26.493Z,1478850086.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:26.597Z,1478850086.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:26.688Z,1478850086.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:26.725Z,1478850086.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:27.079Z,1478850087.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:27.131Z,1478850087.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:27.470Z,1478850087.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:27.494Z,1478850087.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:27.862Z,1478850087.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:27.931Z,1478850087.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:28.308Z,1478850088.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:28.360Z,1478850088.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:28.661Z,1478850088.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:28.698Z,1478850088.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:29.062Z,1478850089.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:29.097Z,1478850089.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:29.461Z,1478850089.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:29.497Z,1478850089.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:29.861Z,1478850089.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:29.898Z,1478850089.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:30.261Z,1478850090.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:30.297Z,1478850090.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:30.661Z,1478850090.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:30.697Z,1478850090.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:31.085Z,1478850091.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:31.105Z,1478850091.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:31.472Z,1478850091.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:31.551Z,1478850091.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:31.879Z,1478850091.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:31.914Z,1478850091.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:32.284Z,1478850092.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:32.310Z,1478850092.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:32.669Z,1478850092.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:32.689Z,1478850092.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:33.068Z,1478850093.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:33.083Z,1478850093.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:33.466Z,1478850093.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:33.493Z,1478850093.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:33.862Z,1478850093.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:33.893Z,1478850093.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:34.268Z,1478850094.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:34.284Z,1478850094.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:34.668Z,1478850094.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:34.696Z,1478850094.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:35.073Z,1478850095.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:35.089Z,1478850095.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:35.464Z,1478850095.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:35.489Z,1478850095.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:35.873Z,1478850095.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:35.897Z,1478850095.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:36.280Z,1478850096.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:36.308Z,1478850096.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:36.680Z,1478850096.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:36.695Z,1478850096.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:37.092Z,1478850097.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:37.113Z,1478850097.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:37.472Z,1478850097.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:37.546Z,1478850097.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:37.864Z,1478850097.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:37.889Z,1478850097.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:38.264Z,1478850098.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:38.297Z,1478850098.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:38.665Z,1478850098.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:38.687Z,1478850098.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:39.064Z,1478850099.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:39.090Z,1478850099.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:39.464Z,1478850099.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:39.532Z,1478850099.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:39.862Z,1478850099.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:39.893Z,1478850099.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:40.261Z,1478850100.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:40.313Z,1478850100.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:40.666Z,1478850100.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:40.725Z,1478850100.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:41.061Z,1478850101.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:41.081Z,1478850101.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:41.475Z,1478850101.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:41.504Z,1478850101.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:41.884Z,1478850101.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:41.920Z,1478850101.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:42.276Z,1478850102.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:42.321Z,1478850102.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:42.684Z,1478850102.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:42.726Z,1478850102.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:43.065Z,1478850103.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:43.117Z,1478850103.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:43.464Z,1478850103.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:43.511Z,1478850103.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:43.910Z,1478850103.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:43.943Z,1478850103.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:44.262Z,1478850104.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:44.301Z,1478850104.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:44.661Z,1478850104.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:44.681Z,1478850104.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:45.065Z,1478850105.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:45.080Z,1478850105.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:45.466Z,1478850105.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:45.481Z,1478850105.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:45.916Z,1478850105.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:45.940Z,1478850105.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:46.272Z,1478850106.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:46.293Z,1478850106.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:46.679Z,1478850106.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:46.695Z,1478850106.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:47.079Z,1478850107.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:47.094Z,1478850107.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:47.493Z,1478850107.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:47.548Z,1478850107.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:47.880Z,1478850107.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:47.903Z,1478850107.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:48.261Z,1478850108.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:48.294Z,1478850108.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:48.661Z,1478850108.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:48.698Z,1478850108.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:49.062Z,1478850109.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:49.097Z,1478850109.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:49.462Z,1478850109.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:49.524Z,1478850109.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:49.874Z,1478850109.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:49.889Z,1478850109.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:50.269Z,1478850110.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:50.285Z,1478850110.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:50.665Z,1478850110.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:50.689Z,1478850110.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:51.069Z,1478850111.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:51.089Z,1478850111.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:51.477Z,1478850111.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:51.542Z,1478850111.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:51.884Z,1478850111.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:51.900Z,1478850111.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:52.283Z,1478850112.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:52.305Z,1478850112.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:52.683Z,1478850112.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:52.706Z,1478850112.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:53.081Z,1478850113.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:53.097Z,1478850113.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:53.465Z,1478850113.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:53.547Z,1478850113.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:53.873Z,1478850113.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:53.888Z,1478850113.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:54.264Z,1478850114.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:54.297Z,1478850114.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:54.668Z,1478850114.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:54.683Z,1478850114.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:55.072Z,1478850115.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:55.092Z,1478850115.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:55.464Z,1478850115.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:55.581Z,1478850115.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:55.869Z,1478850115.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:55.895Z,1478850115.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:56.261Z,1478850116.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:56.302Z,1478850116.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:56.661Z,1478850116.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:56.689Z,1478850116.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:57.091Z,1478850117.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:57.144Z,1478850117.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:57.476Z,1478850117.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:57.540Z,1478850117.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:57.894Z,1478850117.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:57.922Z,1478850117.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:58.280Z,1478850118.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:58.309Z,1478850118.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:58.669Z,1478850118.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:58.683Z,1478850118.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:59.068Z,1478850119.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:59.084Z,1478850119.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:59.471Z,1478850119.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:59.487Z,1478850119.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:41:59.894Z,1478850119.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:41:59.936Z,1478850119.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:00.264Z,1478850120.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:00.296Z,1478850120.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:00.677Z,1478850120.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:00.697Z,1478850120.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:01.061Z,1478850121.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:01.096Z,1478850121.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:01.473Z,1478850121.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:01.536Z,1478850121.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:01.868Z,1478850121.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:01.889Z,1478850121.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:02.275Z,1478850122.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:02.297Z,1478850122.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:02.673Z,1478850122.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:02.693Z,1478850122.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:03.075Z,1478850123.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:03.090Z,1478850123.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:03.481Z,1478850123.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:03.533Z,1478850123.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:03.869Z,1478850123.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:03.884Z,1478850123.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:04.273Z,1478850124.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:04.293Z,1478850124.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:04.665Z,1478850124.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:04.687Z,1478850124.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:05.072Z,1478850125.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:05.088Z,1478850125.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:05.489Z,1478850125.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:05.537Z,1478850125.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:05.861Z,1478850125.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:05.897Z,1478850125.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:06.265Z,1478850126.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:06.301Z,1478850126.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:06.664Z,1478850126.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:06.679Z,1478850126.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:07.069Z,1478850127.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:07.089Z,1478850127.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:07.510Z,1478850127.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:07.545Z,1478850127.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:07.876Z,1478850127.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:07.892Z,1478850127.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:08.276Z,1478850128.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:08.297Z,1478850128.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:08.678Z,1478850128.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:08.693Z,1478850128.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:09.073Z,1478850129.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:09.093Z,1478850129.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:09.461Z,1478850129.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:09.543Z,1478850129.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:09.873Z,1478850129.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:09.933Z,1478850129.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:10.265Z,1478850130.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:10.285Z,1478850130.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:10.665Z,1478850130.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:10.680Z,1478850130.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:11.069Z,1478850131.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:11.123Z,1478850131.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:11.469Z,1478850131.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:11.489Z,1478850131.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:11.894Z,1478850131.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:11.942Z,1478850131.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:12.269Z,1478850132.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:12.284Z,1478850132.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:12.676Z,1478850132.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:12.722Z,1478850132.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:13.079Z,1478850133.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:13.101Z,1478850133.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:13.484Z,1478850133.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:13.499Z,1478850133.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:13.891Z,1478850133.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:13.949Z,1478850133.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:14.261Z,1478850134.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:14.294Z,1478850134.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:14.669Z,1478850134.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:14.691Z,1478850134.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:15.072Z,1478850135.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:15.093Z,1478850135.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:15.507Z,1478850135.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:15.547Z,1478850135.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:15.865Z,1478850135.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:15.906Z,1478850135.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:16.269Z,1478850136.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:16.297Z,1478850136.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:16.668Z,1478850136.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:16.683Z,1478850136.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:17.073Z,1478850137.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:17.108Z,1478850137.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:17.501Z,1478850137.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:17.528Z,1478850137.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:17.875Z,1478850137.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:17.890Z,1478850137.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:18.284Z,1478850138.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:18.299Z,1478850138.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:18.678Z,1478850138.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:18.697Z,1478850138.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:19.083Z,1478850139.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:19.105Z,1478850139.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:19.500Z,1478850139.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:19.536Z,1478850139.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:19.865Z,1478850139.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:19.897Z,1478850139.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:20.261Z,1478850140.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:20.293Z,1478850140.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:20.665Z,1478850140.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:20.691Z,1478850140.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:21.069Z,1478850141.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:21.101Z,1478850141.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:21.494Z,1478850141.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:21.546Z,1478850141.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:21.865Z,1478850141.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:21.897Z,1478850141.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:22.269Z,1478850142.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:22.295Z,1478850142.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:22.304Z,1478850142.304 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T07:37:22.0Z
2016-11-11T07:42:22.304Z,1478850142.304 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T07:42:22.304Z,1478850142.304 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T07:42:22.661Z,1478850142.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:22.705Z,1478850142.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:23.594Z,1478850143.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:23.610Z,1478850143.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:26.832Z,1478850146.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:26.926Z,1478850146.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:27.010Z,1478850147.010 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0068.lzma
2016-11-11T07:42:27.072Z,1478850147.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:27.105Z,1478850147.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:27.445Z,1478850147.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:27.461Z,1478850147.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:27.812Z,1478850147.812 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0068.lzma.bak
2016-11-11T07:42:27.812Z,1478850147.812 [DataOverHttps](INFO): SBD MOMSN=4555174
2016-11-11T07:42:27.866Z,1478850147.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:27.898Z,1478850147.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:29.082Z,1478850149.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:29.146Z,1478850149.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:29.271Z,1478850149.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:29.314Z,1478850149.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:32.719Z,1478850152.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:32.772Z,1478850152.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:32.888Z,1478850152.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:32.920Z,1478850152.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:33.243Z,1478850153.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:33.293Z,1478850153.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:33.654Z,1478850153.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:33.682Z,1478850153.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:34.022Z,1478850154.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:34.069Z,1478850154.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:34.426Z,1478850154.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:34.485Z,1478850154.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:37.882Z,1478850157.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:37.905Z,1478850157.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:37.985Z,1478850157.985 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0069.lzma
2016-11-11T07:42:38.036Z,1478850158.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:38.052Z,1478850158.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:38.428Z,1478850158.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:38.445Z,1478850158.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:38.785Z,1478850158.785 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0069.lzma.bak
2016-11-11T07:42:38.785Z,1478850158.785 [DataOverHttps](INFO): SBD MOMSN=4555176
2016-11-11T07:42:38.841Z,1478850158.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:38.877Z,1478850158.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:40.146Z,1478850160.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:40.162Z,1478850160.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:40.171Z,1478850160.171 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T07:42:40.171Z,1478850160.171 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T07:42:40.171Z,1478850160.171 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T07:42:40.262Z,1478850160.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:40.301Z,1478850160.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:43.768Z,1478850163.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:43.805Z,1478850163.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:43.909Z,1478850163.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:43.935Z,1478850163.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:44.313Z,1478850164.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:44.330Z,1478850164.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:44.712Z,1478850164.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:44.762Z,1478850164.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:45.090Z,1478850165.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:45.141Z,1478850165.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:45.498Z,1478850165.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:45.546Z,1478850165.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:45.898Z,1478850165.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:45.938Z,1478850165.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:46.293Z,1478850166.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:46.346Z,1478850166.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:46.694Z,1478850166.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:46.709Z,1478850166.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:47.092Z,1478850167.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:47.140Z,1478850167.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:47.499Z,1478850167.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:47.518Z,1478850167.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:47.895Z,1478850167.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:47.946Z,1478850167.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:48.293Z,1478850168.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:48.308Z,1478850168.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:48.704Z,1478850168.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:48.728Z,1478850168.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:49.105Z,1478850169.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:49.125Z,1478850169.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:49.506Z,1478850169.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:49.542Z,1478850169.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:49.896Z,1478850169.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:49.935Z,1478850169.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:50.285Z,1478850170.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:50.329Z,1478850170.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:50.685Z,1478850170.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:50.728Z,1478850170.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:51.090Z,1478850171.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:51.121Z,1478850171.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:51.496Z,1478850171.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:51.526Z,1478850171.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:51.893Z,1478850171.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:51.912Z,1478850171.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:52.298Z,1478850172.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:52.315Z,1478850172.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:52.693Z,1478850172.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:52.729Z,1478850172.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:53.085Z,1478850173.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:53.112Z,1478850173.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:53.486Z,1478850173.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:53.516Z,1478850173.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:53.911Z,1478850173.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:53.927Z,1478850173.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:54.308Z,1478850174.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:54.341Z,1478850174.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:54.708Z,1478850174.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:54.727Z,1478850174.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:55.098Z,1478850175.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:55.130Z,1478850175.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:55.496Z,1478850175.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:55.526Z,1478850175.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:55.885Z,1478850175.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:55.925Z,1478850175.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:56.317Z,1478850176.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:56.345Z,1478850176.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:56.694Z,1478850176.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:56.729Z,1478850176.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:57.091Z,1478850177.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:57.099Z,1478850177.099 [PNI_TCM](ERROR): CRC does not match. Expected:0x32062 got:0x7361
2016-11-11T07:42:57.125Z,1478850177.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:57.473Z,1478850177.473 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T07:42:57.489Z,1478850177.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:57.525Z,1478850177.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:57.890Z,1478850177.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:57.913Z,1478850177.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:58.289Z,1478850178.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:58.309Z,1478850178.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:58.686Z,1478850178.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:58.704Z,1478850178.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:59.089Z,1478850179.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:59.124Z,1478850179.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:59.486Z,1478850179.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:59.544Z,1478850179.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:42:59.889Z,1478850179.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:42:59.953Z,1478850179.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:00.291Z,1478850180.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:00.306Z,1478850180.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:00.685Z,1478850180.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:00.721Z,1478850180.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:01.089Z,1478850181.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:01.129Z,1478850181.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:01.485Z,1478850181.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:01.504Z,1478850181.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:01.895Z,1478850181.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:01.937Z,1478850181.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:02.285Z,1478850182.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:02.341Z,1478850182.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:02.689Z,1478850182.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:02.708Z,1478850182.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:03.082Z,1478850183.082 [NAL9602](INFO): Powering down
2016-11-11T07:43:03.104Z,1478850183.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:03.119Z,1478850183.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:03.491Z,1478850183.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:03.506Z,1478850183.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:03.937Z,1478850183.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:03.952Z,1478850183.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:04.289Z,1478850184.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:04.325Z,1478850184.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:04.691Z,1478850184.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:04.698Z,1478850184.698 [PNI_TCM](ERROR): CRC does not match. Expected:0x28641 got:0x16230
2016-11-11T07:43:04.725Z,1478850184.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:05.091Z,1478850185.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:05.106Z,1478850185.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:05.485Z,1478850185.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:05.518Z,1478850185.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:05.885Z,1478850185.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:05.909Z,1478850185.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:06.292Z,1478850186.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:06.307Z,1478850186.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:06.688Z,1478850186.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:06.703Z,1478850186.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:07.090Z,1478850187.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:07.115Z,1478850187.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:07.485Z,1478850187.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:07.528Z,1478850187.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:07.892Z,1478850187.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:07.907Z,1478850187.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:08.290Z,1478850188.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:08.306Z,1478850188.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:08.685Z,1478850188.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:08.711Z,1478850188.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:09.090Z,1478850189.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:09.108Z,1478850189.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:09.487Z,1478850189.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:09.503Z,1478850189.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:09.890Z,1478850189.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:09.909Z,1478850189.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:10.285Z,1478850190.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:10.318Z,1478850190.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:10.691Z,1478850190.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:10.707Z,1478850190.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:11.092Z,1478850191.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:11.113Z,1478850191.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:11.489Z,1478850191.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:11.509Z,1478850191.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:11.901Z,1478850191.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:11.929Z,1478850191.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:12.291Z,1478850192.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:12.313Z,1478850192.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:12.692Z,1478850192.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:12.713Z,1478850192.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:13.086Z,1478850193.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:13.125Z,1478850193.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:13.489Z,1478850193.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:13.513Z,1478850193.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:13.887Z,1478850193.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:13.929Z,1478850193.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:14.291Z,1478850194.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:14.307Z,1478850194.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:14.687Z,1478850194.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:14.702Z,1478850194.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:15.090Z,1478850195.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:15.141Z,1478850195.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:15.505Z,1478850195.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:15.633Z,1478850195.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:15.892Z,1478850195.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:15.965Z,1478850195.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:16.287Z,1478850196.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:16.342Z,1478850196.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:16.688Z,1478850196.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:16.729Z,1478850196.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:17.090Z,1478850197.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:17.129Z,1478850197.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:17.308Z,1478850197.308 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T07:43:17.308Z,1478850197.308 [Rowe_600LCM] Communications Fault, FailCount= 1
2016-11-11T07:43:17.308Z,1478850197.308 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T07:43:17.487Z,1478850197.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:17.502Z,1478850197.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T07:43:17.516Z,1478850197.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:17.582Z,1478850197.582 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T07:43:17.711Z,1478850197.711 [Rowe_600LCM](INFO): Powering down
2016-11-11T07:43:17.886Z,1478850197.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:17.900Z,1478850197.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T07:43:17.902Z,1478850197.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:18.288Z,1478850198.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:18.319Z,1478850198.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:43:18.321Z,1478850198.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:18.689Z,1478850198.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:18.717Z,1478850198.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:43:18.718Z,1478850198.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:19.088Z,1478850199.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:19.120Z,1478850199.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:43:19.122Z,1478850199.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:19.175Z,1478850199.175 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T07:43:19.175Z,1478850199.175 [Rowe_600LCM] No Fault, FailCount= 1
2016-11-11T07:43:19.327Z,1478850199.327 [Rowe_600LCM](INFO): Initializing
2016-11-11T07:43:19.328Z,1478850199.328 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T07:43:19.328Z,1478850199.328 [Rowe_600LCM](INFO): LCM OK
2016-11-11T07:43:19.328Z,1478850199.328 [Rowe_600LCM](INFO): Powering up
2016-11-11T07:43:19.486Z,1478850199.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:19.529Z,1478850199.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:43:19.530Z,1478850199.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:19.889Z,1478850199.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:19.913Z,1478850199.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:43:19.914Z,1478850199.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:20.289Z,1478850200.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:20.332Z,1478850200.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:43:20.333Z,1478850200.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:20.687Z,1478850200.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:20.721Z,1478850200.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:43:20.722Z,1478850200.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:21.086Z,1478850201.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:21.125Z,1478850201.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:43:21.126Z,1478850201.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:21.489Z,1478850201.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:21.520Z,1478850201.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:43:21.522Z,1478850201.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:21.888Z,1478850201.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:21.919Z,1478850201.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:43:21.920Z,1478850201.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:22.286Z,1478850202.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:22.319Z,1478850202.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:43:22.320Z,1478850202.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:22.705Z,1478850202.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:22.732Z,1478850202.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:43:22.733Z,1478850202.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:23.089Z,1478850203.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:23.121Z,1478850203.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:43:23.122Z,1478850203.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:23.492Z,1478850203.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:23.557Z,1478850203.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:43:23.558Z,1478850203.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:23.756Z,1478850203.756 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T07:43:23.888Z,1478850203.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:23.906Z,1478850203.906 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T07:43:23.907Z,1478850203.907 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T07:43:23.908Z,1478850203.908 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T07:43:23.909Z,1478850203.909 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T07:43:23.938Z,1478850203.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T07:43:23.956Z,1478850203.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:24.287Z,1478850204.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:24.325Z,1478850204.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:24.690Z,1478850204.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:24.748Z,1478850204.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:25.124Z,1478850205.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:25.154Z,1478850205.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:25.486Z,1478850205.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:25.525Z,1478850205.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:25.890Z,1478850205.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:25.929Z,1478850205.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:26.302Z,1478850206.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:26.341Z,1478850206.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:26.686Z,1478850206.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:26.745Z,1478850206.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:27.085Z,1478850207.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:27.154Z,1478850207.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:27.505Z,1478850207.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:27.525Z,1478850207.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:27.887Z,1478850207.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:27.902Z,1478850207.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:28.285Z,1478850208.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:28.337Z,1478850208.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:28.693Z,1478850208.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:28.725Z,1478850208.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:29.088Z,1478850209.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:29.130Z,1478850209.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:29.514Z,1478850209.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:29.574Z,1478850209.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:29.893Z,1478850209.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:29.908Z,1478850209.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:30.288Z,1478850210.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:30.335Z,1478850210.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:30.692Z,1478850210.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:30.737Z,1478850210.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:31.104Z,1478850211.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:31.208Z,1478850211.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:31.487Z,1478850211.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:31.530Z,1478850211.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:31.892Z,1478850211.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:31.914Z,1478850211.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:32.294Z,1478850212.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:32.322Z,1478850212.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:32.687Z,1478850212.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:32.725Z,1478850212.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:33.087Z,1478850213.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:33.121Z,1478850213.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:33.487Z,1478850213.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:33.517Z,1478850213.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:33.887Z,1478850213.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:33.929Z,1478850213.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:34.293Z,1478850214.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:34.398Z,1478850214.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:34.686Z,1478850214.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:34.745Z,1478850214.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:35.087Z,1478850215.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:35.133Z,1478850215.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:35.487Z,1478850215.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:35.542Z,1478850215.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:35.887Z,1478850215.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:35.943Z,1478850215.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:36.293Z,1478850216.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:36.364Z,1478850216.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:36.701Z,1478850216.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:36.748Z,1478850216.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:37.095Z,1478850217.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:37.160Z,1478850217.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:37.487Z,1478850217.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:37.525Z,1478850217.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:37.887Z,1478850217.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:37.943Z,1478850217.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:38.299Z,1478850218.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:38.370Z,1478850218.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:38.694Z,1478850218.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:38.721Z,1478850218.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:39.097Z,1478850219.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:39.117Z,1478850219.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:39.487Z,1478850219.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:39.534Z,1478850219.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:39.887Z,1478850219.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:39.926Z,1478850219.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:40.309Z,1478850220.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:40.394Z,1478850220.394 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:40.394Z,1478850220.394 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2016-11-11T07:43:40.394Z,1478850220.394 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:43:40.421Z,1478850220.421 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:40.421Z,1478850220.421 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 39
2016-11-11T07:43:40.421Z,1478850220.421 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:43:40.493Z,1478850220.493 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:43:40.494Z,1478850220.494 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:43:40.686Z,1478850220.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:40.791Z,1478850220.792 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:43:40.792Z,1478850220.792 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2016-11-11T07:43:40.792Z,1478850220.792 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:43:40.792Z,1478850220.792 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 39
2016-11-11T07:43:44.709Z,1478850224.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:44.800Z,1478850224.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:43:44.800Z,1478850224.800 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:43:44.801Z,1478850224.801 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:43:44.805Z,1478850224.805 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:43:44.806Z,1478850224.806 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:43:44.806Z,1478850224.806 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:43:44.808Z,1478850224.807 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:44.808Z,1478850224.808 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 39
2016-11-11T07:43:44.808Z,1478850224.808 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:43:44.839Z,1478850224.839 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:43:44.883Z,1478850224.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:44.930Z,1478850224.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:44.970Z,1478850224.970 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:43:44.970Z,1478850224.970 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 39
2016-11-11T07:43:45.288Z,1478850225.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:45.326Z,1478850225.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:45.343Z,1478850225.343 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:43:45.344Z,1478850225.344 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:43:45.344Z,1478850225.344 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:43:45.692Z,1478850225.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:45.714Z,1478850225.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:46.081Z,1478850226.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:46.146Z,1478850226.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:46.481Z,1478850226.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:46.533Z,1478850226.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:46.896Z,1478850226.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:46.912Z,1478850226.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:47.289Z,1478850227.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:47.315Z,1478850227.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:47.681Z,1478850227.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:47.717Z,1478850227.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:48.081Z,1478850228.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:48.117Z,1478850228.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:48.481Z,1478850228.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:48.517Z,1478850228.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:48.881Z,1478850228.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:48.917Z,1478850228.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:49.281Z,1478850229.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:49.321Z,1478850229.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:49.681Z,1478850229.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:49.696Z,1478850229.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:50.086Z,1478850230.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:50.101Z,1478850230.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:50.493Z,1478850230.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:50.524Z,1478850230.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:50.881Z,1478850230.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:50.905Z,1478850230.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:51.288Z,1478850231.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:51.309Z,1478850231.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:51.688Z,1478850231.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:51.703Z,1478850231.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:52.087Z,1478850232.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:52.109Z,1478850232.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:52.487Z,1478850232.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:52.510Z,1478850232.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:52.895Z,1478850232.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:52.910Z,1478850232.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:53.289Z,1478850233.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:53.305Z,1478850233.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:53.681Z,1478850233.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:53.713Z,1478850233.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:54.101Z,1478850234.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:54.117Z,1478850234.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:54.481Z,1478850234.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:54.507Z,1478850234.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:54.881Z,1478850234.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:54.907Z,1478850234.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:55.297Z,1478850235.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:55.313Z,1478850235.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:55.692Z,1478850235.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:55.715Z,1478850235.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:56.081Z,1478850236.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:56.118Z,1478850236.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:56.494Z,1478850236.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:56.531Z,1478850236.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:56.897Z,1478850236.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:56.945Z,1478850236.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:57.281Z,1478850237.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:57.309Z,1478850237.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:57.688Z,1478850237.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:57.704Z,1478850237.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:58.088Z,1478850238.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:58.104Z,1478850238.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:58.496Z,1478850238.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:58.550Z,1478850238.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:58.896Z,1478850238.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:58.918Z,1478850238.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:59.281Z,1478850239.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:59.337Z,1478850239.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:43:59.681Z,1478850239.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:43:59.719Z,1478850239.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:00.081Z,1478850240.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:00.137Z,1478850240.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:00.481Z,1478850240.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:00.527Z,1478850240.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:00.881Z,1478850240.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:00.927Z,1478850240.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:01.281Z,1478850241.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:01.325Z,1478850241.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:01.681Z,1478850241.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:01.723Z,1478850241.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:02.086Z,1478850242.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:02.101Z,1478850242.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:02.485Z,1478850242.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:02.500Z,1478850242.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:02.881Z,1478850242.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:02.896Z,1478850242.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:03.285Z,1478850243.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:03.300Z,1478850243.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:03.678Z,1478850243.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:03.693Z,1478850243.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:04.085Z,1478850244.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:04.105Z,1478850244.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:04.481Z,1478850244.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:04.496Z,1478850244.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:04.878Z,1478850244.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:04.892Z,1478850244.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:05.285Z,1478850245.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:05.300Z,1478850245.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:05.681Z,1478850245.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:05.701Z,1478850245.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:06.085Z,1478850246.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:06.100Z,1478850246.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:06.481Z,1478850246.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:06.496Z,1478850246.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:06.885Z,1478850246.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:06.900Z,1478850246.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:07.285Z,1478850247.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:07.300Z,1478850247.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:07.685Z,1478850247.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:07.701Z,1478850247.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:08.081Z,1478850248.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:08.101Z,1478850248.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:08.481Z,1478850248.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:08.501Z,1478850248.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:08.881Z,1478850248.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:08.901Z,1478850248.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:09.285Z,1478850249.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:09.305Z,1478850249.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:09.679Z,1478850249.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:09.800Z,1478850249.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:10.081Z,1478850250.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:10.105Z,1478850250.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:10.481Z,1478850250.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:10.509Z,1478850250.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:10.881Z,1478850250.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:10.905Z,1478850250.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:11.281Z,1478850251.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:11.305Z,1478850251.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:11.681Z,1478850251.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:11.735Z,1478850251.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:12.081Z,1478850252.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:12.114Z,1478850252.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:12.481Z,1478850252.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:12.533Z,1478850252.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:12.881Z,1478850252.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:12.901Z,1478850252.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:13.287Z,1478850253.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:13.342Z,1478850253.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:13.684Z,1478850253.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:13.705Z,1478850253.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:14.088Z,1478850254.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:14.180Z,1478850254.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:14.485Z,1478850254.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:14.541Z,1478850254.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:14.888Z,1478850254.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:14.903Z,1478850254.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:15.288Z,1478850255.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:15.309Z,1478850255.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:15.688Z,1478850255.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:15.703Z,1478850255.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:16.084Z,1478850256.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:16.115Z,1478850256.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:16.484Z,1478850256.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:16.522Z,1478850256.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:16.881Z,1478850256.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:16.895Z,1478850256.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:17.285Z,1478850257.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:17.300Z,1478850257.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:17.681Z,1478850257.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:17.701Z,1478850257.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:18.084Z,1478850258.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:18.099Z,1478850258.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:18.489Z,1478850258.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:18.509Z,1478850258.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:18.892Z,1478850258.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:18.913Z,1478850258.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:19.292Z,1478850259.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:19.344Z,1478850259.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:19.684Z,1478850259.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:19.712Z,1478850259.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:20.088Z,1478850260.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:20.109Z,1478850260.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:20.481Z,1478850260.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:20.511Z,1478850260.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:20.892Z,1478850260.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:20.915Z,1478850260.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:21.281Z,1478850261.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:21.309Z,1478850261.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:21.681Z,1478850261.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:21.713Z,1478850261.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:22.089Z,1478850262.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:22.115Z,1478850262.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:22.481Z,1478850262.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:22.517Z,1478850262.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:22.881Z,1478850262.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:22.917Z,1478850262.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:23.281Z,1478850263.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:23.317Z,1478850263.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:23.681Z,1478850263.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:23.716Z,1478850263.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:24.081Z,1478850264.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:24.124Z,1478850264.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:24.493Z,1478850264.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:24.535Z,1478850264.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:24.893Z,1478850264.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:24.953Z,1478850264.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:25.287Z,1478850265.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:25.309Z,1478850265.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:25.684Z,1478850265.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:25.714Z,1478850265.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:26.088Z,1478850266.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:26.103Z,1478850266.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:26.493Z,1478850266.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:26.530Z,1478850266.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:26.892Z,1478850266.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:26.919Z,1478850266.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:27.281Z,1478850267.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:27.317Z,1478850267.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:27.681Z,1478850267.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:27.733Z,1478850267.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:28.088Z,1478850268.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:28.103Z,1478850268.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:28.488Z,1478850268.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:28.544Z,1478850268.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:28.881Z,1478850268.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:28.930Z,1478850268.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:29.285Z,1478850269.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:29.321Z,1478850269.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:29.681Z,1478850269.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:29.701Z,1478850269.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:30.088Z,1478850270.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:30.103Z,1478850270.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:30.484Z,1478850270.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:30.508Z,1478850270.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:30.889Z,1478850270.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:30.921Z,1478850270.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:31.281Z,1478850271.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:31.301Z,1478850271.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:31.681Z,1478850271.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:31.697Z,1478850271.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:32.081Z,1478850272.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:32.101Z,1478850272.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:32.486Z,1478850272.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:32.505Z,1478850272.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:32.892Z,1478850272.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:32.908Z,1478850272.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:33.289Z,1478850273.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:33.309Z,1478850273.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:33.681Z,1478850273.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:33.716Z,1478850273.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:34.081Z,1478850274.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:34.113Z,1478850274.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:34.502Z,1478850274.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:34.517Z,1478850274.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:34.882Z,1478850274.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:34.917Z,1478850274.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:35.281Z,1478850275.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:35.313Z,1478850275.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:35.681Z,1478850275.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:35.717Z,1478850275.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:36.085Z,1478850276.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:36.119Z,1478850276.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:36.481Z,1478850276.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:36.518Z,1478850276.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:36.885Z,1478850276.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:36.900Z,1478850276.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:37.280Z,1478850277.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:37.301Z,1478850277.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:37.687Z,1478850277.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:37.702Z,1478850277.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:38.089Z,1478850278.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:38.104Z,1478850278.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:38.486Z,1478850278.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:38.505Z,1478850278.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:38.888Z,1478850278.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:38.903Z,1478850278.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:39.288Z,1478850279.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:39.303Z,1478850279.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:39.692Z,1478850279.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:39.726Z,1478850279.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:40.081Z,1478850280.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:40.113Z,1478850280.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:40.481Z,1478850280.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:40.513Z,1478850280.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:40.881Z,1478850280.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:40.935Z,1478850280.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:44.324Z,1478850284.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:44.340Z,1478850284.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:44.446Z,1478850284.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:44.475Z,1478850284.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:44.812Z,1478850284.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:44.827Z,1478850284.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:45.213Z,1478850285.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:45.228Z,1478850285.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:45.612Z,1478850285.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:45.664Z,1478850285.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:46.012Z,1478850286.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:46.026Z,1478850286.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:46.421Z,1478850286.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:46.467Z,1478850286.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:46.817Z,1478850286.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:46.872Z,1478850286.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:47.212Z,1478850287.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:47.227Z,1478850287.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:47.616Z,1478850287.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:47.637Z,1478850287.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:48.011Z,1478850288.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:48.030Z,1478850288.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:48.413Z,1478850288.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:48.433Z,1478850288.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:48.817Z,1478850288.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:48.838Z,1478850288.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:49.205Z,1478850289.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:49.237Z,1478850289.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:49.605Z,1478850289.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:49.638Z,1478850289.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:50.005Z,1478850290.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:50.030Z,1478850290.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:50.405Z,1478850290.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:50.430Z,1478850290.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:50.820Z,1478850290.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:50.841Z,1478850290.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:51.204Z,1478850291.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:51.230Z,1478850291.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:51.605Z,1478850291.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:51.637Z,1478850291.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:52.005Z,1478850292.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:52.053Z,1478850292.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:52.417Z,1478850292.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:52.432Z,1478850292.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:52.817Z,1478850292.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:52.832Z,1478850292.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:53.211Z,1478850293.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:53.233Z,1478850293.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:53.615Z,1478850293.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:53.631Z,1478850293.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:54.016Z,1478850294.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:54.032Z,1478850294.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:54.413Z,1478850294.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:54.433Z,1478850294.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:54.817Z,1478850294.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:54.838Z,1478850294.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:55.205Z,1478850295.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:55.237Z,1478850295.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:55.605Z,1478850295.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:55.637Z,1478850295.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:56.005Z,1478850296.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:56.037Z,1478850296.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:56.405Z,1478850296.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:56.437Z,1478850296.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:56.813Z,1478850296.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:56.838Z,1478850296.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:57.220Z,1478850297.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:57.261Z,1478850297.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:57.605Z,1478850297.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:57.641Z,1478850297.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:58.005Z,1478850298.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:58.041Z,1478850298.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:58.405Z,1478850298.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:58.454Z,1478850298.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:58.805Z,1478850298.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:58.829Z,1478850298.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:59.212Z,1478850299.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:59.265Z,1478850299.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:44:59.612Z,1478850299.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:44:59.663Z,1478850299.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:00.012Z,1478850300.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:00.027Z,1478850300.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:00.411Z,1478850300.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:00.433Z,1478850300.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:00.819Z,1478850300.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:00.835Z,1478850300.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:01.212Z,1478850301.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:01.233Z,1478850301.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:01.613Z,1478850301.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:01.633Z,1478850301.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:02.012Z,1478850302.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:02.036Z,1478850302.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:02.405Z,1478850302.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:02.431Z,1478850302.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:02.821Z,1478850302.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:02.836Z,1478850302.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:03.205Z,1478850303.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:03.237Z,1478850303.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:03.605Z,1478850303.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:03.641Z,1478850303.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:04.005Z,1478850304.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:04.045Z,1478850304.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:04.405Z,1478850304.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:04.442Z,1478850304.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:04.805Z,1478850304.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:04.842Z,1478850304.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:05.206Z,1478850305.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:05.242Z,1478850305.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:05.606Z,1478850305.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:05.629Z,1478850305.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:06.005Z,1478850306.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:06.049Z,1478850306.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:06.421Z,1478850306.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:06.445Z,1478850306.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:06.805Z,1478850306.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:06.837Z,1478850306.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:07.211Z,1478850307.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:07.228Z,1478850307.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:07.612Z,1478850307.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:07.628Z,1478850307.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:08.016Z,1478850308.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:08.032Z,1478850308.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:08.421Z,1478850308.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:08.438Z,1478850308.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:08.805Z,1478850308.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:08.838Z,1478850308.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:09.205Z,1478850309.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:09.237Z,1478850309.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:09.605Z,1478850309.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:09.637Z,1478850309.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:10.013Z,1478850310.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:10.065Z,1478850310.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:10.409Z,1478850310.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:10.458Z,1478850310.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:10.812Z,1478850310.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:10.827Z,1478850310.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:11.211Z,1478850311.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:11.265Z,1478850311.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:11.611Z,1478850311.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:11.633Z,1478850311.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:12.015Z,1478850312.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:12.068Z,1478850312.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:12.412Z,1478850312.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:12.463Z,1478850312.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:12.812Z,1478850312.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:12.826Z,1478850312.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:13.205Z,1478850313.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:13.230Z,1478850313.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:13.605Z,1478850313.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:13.630Z,1478850313.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:14.005Z,1478850314.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:14.038Z,1478850314.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:14.405Z,1478850314.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:14.430Z,1478850314.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:14.805Z,1478850314.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:14.840Z,1478850314.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:15.205Z,1478850315.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:15.241Z,1478850315.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:15.605Z,1478850315.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:15.632Z,1478850315.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:16.005Z,1478850316.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:16.041Z,1478850316.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:16.405Z,1478850316.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:16.444Z,1478850316.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:16.809Z,1478850316.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:16.841Z,1478850316.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:17.205Z,1478850317.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:17.241Z,1478850317.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:17.605Z,1478850317.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:17.644Z,1478850317.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:18.005Z,1478850318.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:18.042Z,1478850318.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:18.405Z,1478850318.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:18.443Z,1478850318.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:18.805Z,1478850318.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:18.840Z,1478850318.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:19.205Z,1478850319.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:19.245Z,1478850319.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:19.605Z,1478850319.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:19.620Z,1478850319.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:19.803Z,1478850319.803 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T07:45:19.803Z,1478850319.803 [Rowe_600LCM] Communications Fault, FailCount= 2
2016-11-11T07:45:19.803Z,1478850319.803 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T07:45:20.005Z,1478850320.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:20.036Z,1478850320.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T07:45:20.038Z,1478850320.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:20.078Z,1478850320.078 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T07:45:20.207Z,1478850320.207 [Rowe_600LCM](INFO): Powering down
2016-11-11T07:45:20.412Z,1478850320.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:20.427Z,1478850320.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T07:45:20.428Z,1478850320.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:20.812Z,1478850320.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:20.826Z,1478850320.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:45:20.827Z,1478850320.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:21.015Z,1478850321.015 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2016-11-11T07:45:21.015Z,1478850321.016 [Rowe_600LCM] Hardware Fault, FailCount= 2
2016-11-11T07:45:21.016Z,1478850321.016 [Rowe_600LCM](ERROR): Hardware Fault
2016-11-11T07:45:21.212Z,1478850321.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:21.232Z,1478850321.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:45:21.234Z,1478850321.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:21.605Z,1478850321.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:21.639Z,1478850321.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:45:21.640Z,1478850321.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:21.669Z,1478850321.668 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T07:45:21.669Z,1478850321.668 [Rowe_600LCM] No Fault, FailCount= 2
2016-11-11T07:45:21.823Z,1478850321.823 [Rowe_600LCM](INFO): Initializing
2016-11-11T07:45:21.824Z,1478850321.824 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T07:45:21.824Z,1478850321.824 [Rowe_600LCM](INFO): LCM OK
2016-11-11T07:45:21.824Z,1478850321.824 [Rowe_600LCM](INFO): Powering up
2016-11-11T07:45:22.005Z,1478850322.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:22.036Z,1478850322.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:45:22.037Z,1478850322.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:22.409Z,1478850322.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:22.440Z,1478850322.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:45:22.442Z,1478850322.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:22.805Z,1478850322.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:22.836Z,1478850322.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:45:22.837Z,1478850322.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:23.205Z,1478850323.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:23.265Z,1478850323.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:45:23.266Z,1478850323.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:23.605Z,1478850323.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:23.642Z,1478850323.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:45:23.643Z,1478850323.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:24.012Z,1478850324.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:24.026Z,1478850324.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:45:24.028Z,1478850324.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:24.413Z,1478850324.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:24.432Z,1478850324.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:45:24.433Z,1478850324.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:24.813Z,1478850324.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:24.870Z,1478850324.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2016-11-11T07:45:24.872Z,1478850324.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:25.212Z,1478850325.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:25.227Z,1478850325.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:45:25.228Z,1478850325.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:25.605Z,1478850325.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:25.651Z,1478850325.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:45:25.653Z,1478850325.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:25.946Z,1478850325.946 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T07:45:26.016Z,1478850326.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:26.074Z,1478850326.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2016-11-11T07:45:26.076Z,1478850326.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:26.087Z,1478850326.087 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T07:45:26.088Z,1478850326.088 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T07:45:26.089Z,1478850326.089 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T07:45:26.090Z,1478850326.090 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T07:45:26.432Z,1478850326.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:26.449Z,1478850326.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T07:45:26.450Z,1478850326.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:26.805Z,1478850326.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:26.848Z,1478850326.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:27.211Z,1478850327.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:27.238Z,1478850327.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:27.617Z,1478850327.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:27.632Z,1478850327.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:28.005Z,1478850328.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:28.039Z,1478850328.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:28.405Z,1478850328.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:28.439Z,1478850328.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:28.812Z,1478850328.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:28.836Z,1478850328.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:29.205Z,1478850329.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:29.239Z,1478850329.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:29.605Z,1478850329.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:29.634Z,1478850329.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:30.009Z,1478850330.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:30.049Z,1478850330.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:30.417Z,1478850330.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:30.433Z,1478850330.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:30.812Z,1478850330.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:30.827Z,1478850330.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:31.208Z,1478850331.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:31.236Z,1478850331.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:31.613Z,1478850331.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:31.633Z,1478850331.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:32.005Z,1478850332.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:32.038Z,1478850332.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:32.420Z,1478850332.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:32.436Z,1478850332.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:32.805Z,1478850332.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:32.831Z,1478850332.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:33.205Z,1478850333.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:33.238Z,1478850333.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:33.606Z,1478850333.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:33.675Z,1478850333.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:34.009Z,1478850334.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:34.053Z,1478850334.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:34.413Z,1478850334.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:34.449Z,1478850334.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:34.805Z,1478850334.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:34.821Z,1478850334.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:35.205Z,1478850335.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:35.235Z,1478850335.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:35.609Z,1478850335.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:35.633Z,1478850335.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:36.008Z,1478850336.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:36.036Z,1478850336.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:36.413Z,1478850336.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:36.438Z,1478850336.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:36.809Z,1478850336.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:36.854Z,1478850336.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:37.213Z,1478850337.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:37.285Z,1478850337.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:37.609Z,1478850337.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:37.641Z,1478850337.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:38.005Z,1478850338.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:38.043Z,1478850338.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:38.413Z,1478850338.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:38.454Z,1478850338.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:38.805Z,1478850338.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:38.825Z,1478850338.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:39.209Z,1478850339.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:39.262Z,1478850339.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:39.609Z,1478850339.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:39.659Z,1478850339.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:40.011Z,1478850340.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:40.027Z,1478850340.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:40.418Z,1478850340.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:40.433Z,1478850340.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:40.813Z,1478850340.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:40.833Z,1478850340.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:41.212Z,1478850341.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:41.233Z,1478850341.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:44.652Z,1478850344.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:44.667Z,1478850344.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:44.768Z,1478850344.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:44.812Z,1478850344.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:45.125Z,1478850345.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:45.140Z,1478850345.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:45.520Z,1478850345.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:45.570Z,1478850345.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:45.924Z,1478850345.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:45.940Z,1478850345.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:46.324Z,1478850346.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:46.345Z,1478850346.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:46.727Z,1478850346.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:46.743Z,1478850346.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:47.128Z,1478850347.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:47.143Z,1478850347.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:47.528Z,1478850347.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:47.542Z,1478850347.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:47.925Z,1478850347.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:47.952Z,1478850347.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:48.331Z,1478850348.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:48.351Z,1478850348.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:48.728Z,1478850348.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:48.749Z,1478850348.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:49.117Z,1478850349.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:49.153Z,1478850349.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:49.517Z,1478850349.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:49.549Z,1478850349.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:49.917Z,1478850349.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:49.952Z,1478850349.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:50.333Z,1478850350.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:50.369Z,1478850350.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:50.717Z,1478850350.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:50.753Z,1478850350.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:50.774Z,1478850350.774 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T07:45:51.117Z,1478850351.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:51.153Z,1478850351.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:51.517Z,1478850351.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:51.581Z,1478850351.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:51.923Z,1478850351.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:51.938Z,1478850351.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:52.329Z,1478850352.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:52.344Z,1478850352.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:52.723Z,1478850352.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:52.776Z,1478850352.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:53.123Z,1478850353.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:53.138Z,1478850353.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:53.524Z,1478850353.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:53.575Z,1478850353.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:53.924Z,1478850353.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:53.975Z,1478850353.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:54.331Z,1478850354.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:54.347Z,1478850354.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:54.724Z,1478850354.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:54.739Z,1478850354.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:55.124Z,1478850355.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:55.145Z,1478850355.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:55.524Z,1478850355.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:55.540Z,1478850355.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:55.917Z,1478850355.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:55.951Z,1478850355.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:56.324Z,1478850356.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:56.348Z,1478850356.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:56.728Z,1478850356.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:56.751Z,1478850356.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:57.117Z,1478850357.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:57.150Z,1478850357.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:57.517Z,1478850357.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:57.550Z,1478850357.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:57.924Z,1478850357.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:57.947Z,1478850357.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:58.317Z,1478850358.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:58.350Z,1478850358.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:58.717Z,1478850358.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:58.747Z,1478850358.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:59.124Z,1478850359.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:59.147Z,1478850359.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:59.517Z,1478850359.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:59.545Z,1478850359.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:45:59.917Z,1478850359.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:45:59.951Z,1478850359.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:00.332Z,1478850360.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:00.348Z,1478850360.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:00.728Z,1478850360.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:00.752Z,1478850360.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:01.121Z,1478850361.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:01.155Z,1478850361.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:01.537Z,1478850361.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:01.565Z,1478850361.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:01.917Z,1478850361.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:01.937Z,1478850361.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:02.328Z,1478850362.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:02.343Z,1478850362.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:02.729Z,1478850362.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:02.744Z,1478850362.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:03.124Z,1478850363.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:03.140Z,1478850363.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:03.524Z,1478850363.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:03.539Z,1478850363.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:03.920Z,1478850363.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:03.950Z,1478850363.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:04.324Z,1478850364.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:04.339Z,1478850364.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:04.717Z,1478850364.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:04.781Z,1478850364.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:05.132Z,1478850365.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:05.148Z,1478850365.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:05.517Z,1478850365.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:05.549Z,1478850365.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:05.917Z,1478850365.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:05.973Z,1478850365.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:06.325Z,1478850366.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:06.351Z,1478850366.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:06.725Z,1478850366.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:06.773Z,1478850366.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:07.117Z,1478850367.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:07.161Z,1478850367.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:07.517Z,1478850367.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:07.573Z,1478850367.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:07.917Z,1478850367.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:07.966Z,1478850367.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:08.322Z,1478850368.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:08.337Z,1478850368.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:08.717Z,1478850368.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:08.737Z,1478850368.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:09.123Z,1478850369.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:09.137Z,1478850369.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:09.524Z,1478850369.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:09.539Z,1478850369.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:09.923Z,1478850369.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:09.939Z,1478850369.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:10.324Z,1478850370.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:10.345Z,1478850370.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:10.717Z,1478850370.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:10.760Z,1478850370.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:11.117Z,1478850371.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:11.153Z,1478850371.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:11.523Z,1478850371.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:11.538Z,1478850371.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:11.917Z,1478850371.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:11.932Z,1478850371.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:12.325Z,1478850372.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:12.345Z,1478850372.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:12.717Z,1478850372.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:12.752Z,1478850372.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:13.117Z,1478850373.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:13.152Z,1478850373.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:13.517Z,1478850373.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:13.549Z,1478850373.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:13.917Z,1478850373.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:13.951Z,1478850373.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:14.317Z,1478850374.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:14.348Z,1478850374.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:14.718Z,1478850374.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:14.749Z,1478850374.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:15.133Z,1478850375.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:15.148Z,1478850375.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:15.522Z,1478850375.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:15.553Z,1478850375.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:15.918Z,1478850375.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:15.954Z,1478850375.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:16.325Z,1478850376.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:16.361Z,1478850376.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:16.717Z,1478850376.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:16.757Z,1478850376.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:17.122Z,1478850377.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:17.138Z,1478850377.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:17.520Z,1478850377.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:17.570Z,1478850377.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:17.924Z,1478850377.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:17.955Z,1478850377.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:18.317Z,1478850378.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:18.343Z,1478850378.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:18.732Z,1478850378.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:18.789Z,1478850378.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:19.121Z,1478850379.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:19.154Z,1478850379.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:19.517Z,1478850379.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:19.574Z,1478850379.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:19.917Z,1478850379.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:19.937Z,1478850379.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:20.322Z,1478850380.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:20.337Z,1478850380.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:20.728Z,1478850380.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:20.788Z,1478850380.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:21.129Z,1478850381.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:21.144Z,1478850381.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:21.524Z,1478850381.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:21.587Z,1478850381.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:21.924Z,1478850381.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:21.977Z,1478850381.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:22.324Z,1478850382.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:22.345Z,1478850382.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:22.719Z,1478850382.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:22.751Z,1478850382.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:23.125Z,1478850383.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:23.141Z,1478850383.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:23.517Z,1478850383.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:23.551Z,1478850383.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:23.917Z,1478850383.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:23.951Z,1478850383.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:24.317Z,1478850384.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:24.349Z,1478850384.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:24.725Z,1478850384.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:24.759Z,1478850384.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:25.117Z,1478850385.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:25.153Z,1478850385.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:25.517Z,1478850385.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:25.540Z,1478850385.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:25.917Z,1478850385.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:25.961Z,1478850385.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:26.317Z,1478850386.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:26.364Z,1478850386.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:26.716Z,1478850386.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:26.741Z,1478850386.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:27.123Z,1478850387.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:27.145Z,1478850387.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:27.524Z,1478850387.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:27.539Z,1478850387.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:27.924Z,1478850387.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:27.940Z,1478850387.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:28.329Z,1478850388.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:28.359Z,1478850388.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:28.720Z,1478850388.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:28.735Z,1478850388.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:29.121Z,1478850389.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:29.141Z,1478850389.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:29.524Z,1478850389.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:29.539Z,1478850389.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:29.924Z,1478850389.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:29.940Z,1478850389.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:30.324Z,1478850390.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:30.345Z,1478850390.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:30.717Z,1478850390.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:30.742Z,1478850390.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:31.125Z,1478850391.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:31.145Z,1478850391.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:31.517Z,1478850391.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:31.549Z,1478850391.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:31.917Z,1478850391.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:31.953Z,1478850391.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:32.317Z,1478850392.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:32.337Z,1478850392.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:32.723Z,1478850392.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:32.769Z,1478850392.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:33.124Z,1478850393.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:33.140Z,1478850393.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:33.523Z,1478850393.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:33.538Z,1478850393.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:33.924Z,1478850393.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:33.982Z,1478850393.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:34.324Z,1478850394.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:34.361Z,1478850394.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:34.717Z,1478850394.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:34.769Z,1478850394.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:35.121Z,1478850395.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:35.152Z,1478850395.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:35.521Z,1478850395.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:35.577Z,1478850395.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:35.924Z,1478850395.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:35.975Z,1478850395.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:36.331Z,1478850396.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:36.347Z,1478850396.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:36.725Z,1478850396.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:36.745Z,1478850396.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:37.117Z,1478850397.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:37.154Z,1478850397.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:37.324Z,1478850397.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:37.517Z,1478850397.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:37.547Z,1478850397.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:37.924Z,1478850397.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:37.950Z,1478850397.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:38.122Z,1478850398.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:38.332Z,1478850398.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:38.353Z,1478850398.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:38.717Z,1478850398.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:38.740Z,1478850398.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:39.121Z,1478850399.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:39.157Z,1478850399.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:39.517Z,1478850399.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:39.544Z,1478850399.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:39.917Z,1478850399.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:39.955Z,1478850399.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:40.321Z,1478850400.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:40.336Z,1478850400.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:40.724Z,1478850400.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:40.743Z,1478850400.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:41.124Z,1478850401.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:41.139Z,1478850401.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:41.530Z,1478850401.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:41.563Z,1478850401.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:44.953Z,1478850404.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:44.990Z,1478850404.990 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:44.990Z,1478850404.990 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2016-11-11T07:46:44.990Z,1478850404.990 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:46:44.997Z,1478850404.997 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:44.997Z,1478850404.997 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 40
2016-11-11T07:46:44.997Z,1478850404.997 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:46:45.013Z,1478850405.013 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:46:45.013Z,1478850405.013 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:46:45.106Z,1478850405.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:45.188Z,1478850405.188 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:46:45.189Z,1478850405.188 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2016-11-11T07:46:45.189Z,1478850405.189 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:46:45.189Z,1478850405.189 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 40
2016-11-11T07:46:45.445Z,1478850405.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:45.472Z,1478850405.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:46:45.472Z,1478850405.473 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:46:45.473Z,1478850405.473 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:46:45.477Z,1478850405.477 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:46:45.478Z,1478850405.478 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:46:45.478Z,1478850405.478 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:46:45.480Z,1478850405.480 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:45.480Z,1478850405.480 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 40
2016-11-11T07:46:45.480Z,1478850405.480 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:46:45.494Z,1478850405.494 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:46:45.841Z,1478850405.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:45.879Z,1478850405.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:45.898Z,1478850405.898 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:46:45.898Z,1478850405.898 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 40
2016-11-11T07:46:46.254Z,1478850406.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:46.281Z,1478850406.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:46.287Z,1478850406.287 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:46:46.287Z,1478850406.287 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:46:46.288Z,1478850406.288 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:46:46.650Z,1478850406.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:46.676Z,1478850406.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:47.050Z,1478850407.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:47.112Z,1478850407.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:47.450Z,1478850407.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:47.465Z,1478850407.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:47.849Z,1478850407.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:47.909Z,1478850407.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:48.253Z,1478850408.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:48.273Z,1478850408.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:48.649Z,1478850408.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:48.704Z,1478850408.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:49.047Z,1478850409.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:49.085Z,1478850409.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:49.441Z,1478850409.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:49.509Z,1478850409.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:49.841Z,1478850409.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:49.897Z,1478850409.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:50.249Z,1478850410.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:50.274Z,1478850410.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:50.641Z,1478850410.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:50.677Z,1478850410.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:51.041Z,1478850411.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:51.077Z,1478850411.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:51.296Z,1478850411.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:51.441Z,1478850411.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:51.477Z,1478850411.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:51.841Z,1478850411.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:51.876Z,1478850411.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:52.092Z,1478850412.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:52.241Z,1478850412.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:52.277Z,1478850412.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:52.653Z,1478850412.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:52.688Z,1478850412.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:53.056Z,1478850413.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:53.087Z,1478850413.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:53.445Z,1478850413.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:53.460Z,1478850413.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:53.844Z,1478850413.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:53.869Z,1478850413.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:54.248Z,1478850414.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:54.263Z,1478850414.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:54.646Z,1478850414.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:54.677Z,1478850414.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:55.053Z,1478850415.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:55.068Z,1478850415.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:55.448Z,1478850415.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:55.463Z,1478850415.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:55.848Z,1478850415.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:55.863Z,1478850415.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:56.241Z,1478850416.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:56.266Z,1478850416.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:56.641Z,1478850416.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:56.675Z,1478850416.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:57.041Z,1478850417.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:57.076Z,1478850417.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:57.452Z,1478850417.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:57.473Z,1478850417.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:57.845Z,1478850417.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:57.870Z,1478850417.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:58.241Z,1478850418.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:58.273Z,1478850418.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:58.648Z,1478850418.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:58.675Z,1478850418.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:59.041Z,1478850419.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:59.077Z,1478850419.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:59.441Z,1478850419.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:59.468Z,1478850419.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:46:59.845Z,1478850419.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:46:59.872Z,1478850419.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:00.241Z,1478850420.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:00.301Z,1478850420.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:00.653Z,1478850420.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:00.684Z,1478850420.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:01.041Z,1478850421.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:01.069Z,1478850421.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:01.448Z,1478850421.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:01.463Z,1478850421.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:01.848Z,1478850421.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:01.864Z,1478850421.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:02.256Z,1478850422.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:02.336Z,1478850422.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:02.641Z,1478850422.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:02.674Z,1478850422.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:03.041Z,1478850423.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:03.073Z,1478850423.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:03.441Z,1478850423.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:03.486Z,1478850423.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:03.841Z,1478850423.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:03.869Z,1478850423.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:04.241Z,1478850424.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:04.293Z,1478850424.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:04.649Z,1478850424.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:04.714Z,1478850424.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:05.041Z,1478850425.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:05.077Z,1478850425.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:05.441Z,1478850425.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:05.473Z,1478850425.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:05.845Z,1478850425.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:05.884Z,1478850425.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:06.246Z,1478850426.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:06.270Z,1478850426.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:06.641Z,1478850426.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:06.665Z,1478850426.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:07.044Z,1478850427.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:07.067Z,1478850427.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:07.448Z,1478850427.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:07.462Z,1478850427.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:07.848Z,1478850427.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:07.864Z,1478850427.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:08.252Z,1478850428.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:08.281Z,1478850428.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:08.641Z,1478850428.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:08.684Z,1478850428.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:09.041Z,1478850429.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:09.081Z,1478850429.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:09.445Z,1478850429.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:09.485Z,1478850429.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:09.845Z,1478850429.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:09.859Z,1478850429.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:10.246Z,1478850430.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:10.262Z,1478850430.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:10.653Z,1478850430.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:10.673Z,1478850430.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:11.048Z,1478850431.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:11.084Z,1478850431.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:11.452Z,1478850431.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:11.467Z,1478850431.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:11.841Z,1478850431.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:11.873Z,1478850431.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:12.248Z,1478850432.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:12.269Z,1478850432.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:12.648Z,1478850432.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:12.663Z,1478850432.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:13.053Z,1478850433.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:13.073Z,1478850433.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:13.448Z,1478850433.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:13.463Z,1478850433.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:13.848Z,1478850433.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:13.863Z,1478850433.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:14.244Z,1478850434.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:14.269Z,1478850434.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:14.647Z,1478850434.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:14.666Z,1478850434.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:15.047Z,1478850435.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:15.116Z,1478850435.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:15.452Z,1478850435.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:15.468Z,1478850435.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:15.841Z,1478850435.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:15.874Z,1478850435.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:16.241Z,1478850436.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:16.265Z,1478850436.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:16.644Z,1478850436.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:16.708Z,1478850436.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:17.049Z,1478850437.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:17.064Z,1478850437.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:17.448Z,1478850437.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:17.464Z,1478850437.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:17.857Z,1478850437.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:17.915Z,1478850437.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:18.241Z,1478850438.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:18.274Z,1478850438.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:18.641Z,1478850438.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:18.705Z,1478850438.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:19.041Z,1478850439.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:19.099Z,1478850439.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:19.441Z,1478850439.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:19.474Z,1478850439.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:19.841Z,1478850439.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:19.873Z,1478850439.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:20.241Z,1478850440.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:20.273Z,1478850440.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:20.641Z,1478850440.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:20.681Z,1478850440.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:21.041Z,1478850441.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:21.077Z,1478850441.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:21.441Z,1478850441.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:21.477Z,1478850441.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:21.845Z,1478850441.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:21.865Z,1478850441.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:21.971Z,1478850441.971 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T07:47:21.971Z,1478850441.971 [Rowe_600LCM] Communications Fault, FailCount= 3
2016-11-11T07:47:21.971Z,1478850441.971 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T07:47:22.250Z,1478850442.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:22.312Z,1478850442.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T07:47:22.314Z,1478850442.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:22.375Z,1478850442.375 [Rowe_600LCM](INFO): Powering down
2016-11-11T07:47:22.404Z,1478850442.404 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T07:47:22.653Z,1478850442.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:22.673Z,1478850442.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T07:47:22.674Z,1478850442.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:23.048Z,1478850443.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:23.063Z,1478850443.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:47:23.064Z,1478850443.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:23.449Z,1478850443.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:23.464Z,1478850443.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:47:23.465Z,1478850443.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:23.841Z,1478850443.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:23.880Z,1478850443.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:47:23.881Z,1478850443.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:23.914Z,1478850443.914 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T07:47:23.914Z,1478850443.914 [Rowe_600LCM] No Fault, FailCount= 3
2016-11-11T07:47:23.991Z,1478850443.991 [Rowe_600LCM](INFO): Initializing
2016-11-11T07:47:23.992Z,1478850443.992 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T07:47:23.992Z,1478850443.992 [Rowe_600LCM](INFO): LCM OK
2016-11-11T07:47:23.992Z,1478850443.992 [Rowe_600LCM](INFO): Powering up
2016-11-11T07:47:24.241Z,1478850444.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:24.276Z,1478850444.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:47:24.278Z,1478850444.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:24.642Z,1478850444.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:24.665Z,1478850444.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:47:24.666Z,1478850444.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:25.041Z,1478850445.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:25.082Z,1478850445.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:47:25.087Z,1478850445.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:25.441Z,1478850445.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:25.460Z,1478850445.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:47:25.462Z,1478850445.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:25.842Z,1478850445.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:25.861Z,1478850445.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:47:25.862Z,1478850445.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:26.250Z,1478850446.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:26.265Z,1478850446.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:47:26.266Z,1478850446.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:26.648Z,1478850446.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:26.668Z,1478850446.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:47:26.670Z,1478850446.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:27.048Z,1478850447.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:27.071Z,1478850447.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:47:27.072Z,1478850447.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:27.448Z,1478850447.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:27.469Z,1478850447.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:47:27.470Z,1478850447.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:27.841Z,1478850447.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:27.873Z,1478850447.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:47:27.874Z,1478850447.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:28.117Z,1478850448.117 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T07:47:28.189Z,1478850448.188 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T07:47:28.190Z,1478850448.190 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T07:47:28.191Z,1478850448.191 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T07:47:28.192Z,1478850448.192 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T07:47:28.248Z,1478850448.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:28.294Z,1478850448.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:47:28.304Z,1478850448.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:28.654Z,1478850448.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:28.680Z,1478850448.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:29.077Z,1478850449.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:29.119Z,1478850449.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:29.441Z,1478850449.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:29.485Z,1478850449.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:29.846Z,1478850449.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:29.891Z,1478850449.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:30.245Z,1478850450.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:30.265Z,1478850450.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:30.650Z,1478850450.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:30.702Z,1478850450.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:31.049Z,1478850451.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:31.059Z,1478850451.059 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T07:47:31.060Z,1478850451.059 [BPC1] Data Fault, FailCount= 1
2016-11-11T07:47:31.060Z,1478850451.059 [BPC1](ERROR): Data Fault
2016-11-11T07:47:31.097Z,1478850451.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:31.139Z,1478850451.138 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T07:47:31.450Z,1478850451.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:31.468Z,1478850451.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:31.848Z,1478850451.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:31.867Z,1478850451.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:32.244Z,1478850452.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:32.277Z,1478850452.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:32.324Z,1478850452.324 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:47:32.324Z,1478850452.325 [BPC1] No Fault, FailCount= 1
2016-11-11T07:47:32.641Z,1478850452.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:32.722Z,1478850452.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:33.041Z,1478850453.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:33.086Z,1478850453.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:33.441Z,1478850453.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:33.478Z,1478850453.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:33.841Z,1478850453.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:33.877Z,1478850453.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:34.258Z,1478850454.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:34.285Z,1478850454.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:34.649Z,1478850454.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:34.668Z,1478850454.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:35.049Z,1478850455.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:35.066Z,1478850455.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:35.451Z,1478850455.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:35.501Z,1478850455.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:35.849Z,1478850455.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:35.872Z,1478850455.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:36.245Z,1478850456.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:36.287Z,1478850456.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:36.641Z,1478850456.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:36.677Z,1478850456.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:37.041Z,1478850457.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:37.080Z,1478850457.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:37.441Z,1478850457.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:37.481Z,1478850457.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:37.841Z,1478850457.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:37.866Z,1478850457.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:38.255Z,1478850458.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:38.279Z,1478850458.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:38.641Z,1478850458.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:38.681Z,1478850458.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:39.041Z,1478850459.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:39.072Z,1478850459.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:39.441Z,1478850459.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:39.485Z,1478850459.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:39.842Z,1478850459.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:39.869Z,1478850459.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:40.241Z,1478850460.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:40.276Z,1478850460.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:40.641Z,1478850460.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:40.676Z,1478850460.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:40.699Z,1478850460.699 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T07:47:40.700Z,1478850460.700 [Default:CheckIn:C.Wait] Stopped
2016-11-11T07:47:40.700Z,1478850460.700 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T07:47:40.700Z,1478850460.700 [Default:CheckIn:D] Running Loop=1
2016-11-11T07:47:41.041Z,1478850461.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:41.081Z,1478850461.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:41.090Z,1478850461.090 [Default:CheckIn:D] Stopped
2016-11-11T07:47:41.090Z,1478850461.090 [Default:CheckIn:E] Running Loop=1
2016-11-11T07:47:41.447Z,1478850461.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:41.479Z,1478850461.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:41.496Z,1478850461.496 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 177.662988 min 
2016-11-11T07:47:41.497Z,1478850461.497 [Default:CheckIn:E] Stopped
2016-11-11T07:47:41.497Z,1478850461.497 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T07:47:41.497Z,1478850461.497 [Default:CheckIn] Stopped
2016-11-11T07:47:41.497Z,1478850461.497 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T07:47:41.497Z,1478850461.497 [Default:CheckIn](INFO): Running loop #18
2016-11-11T07:47:41.497Z,1478850461.497 [Default:CheckIn] Running Loop=18
2016-11-11T07:47:41.497Z,1478850461.497 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T07:47:41.498Z,1478850461.497 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T07:47:41.841Z,1478850461.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:41.884Z,1478850461.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:44.744Z,1478850464.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:45.317Z,1478850465.317 [NAL9602](INFO): Powering up
2016-11-11T07:47:45.334Z,1478850465.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:45.441Z,1478850465.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:45.530Z,1478850465.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:45.540Z,1478850465.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:45.559Z,1478850465.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:45.924Z,1478850465.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:45.950Z,1478850465.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:46.341Z,1478850466.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:46.394Z,1478850466.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:46.717Z,1478850466.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:46.744Z,1478850466.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:47.117Z,1478850467.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:47.169Z,1478850467.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:47.516Z,1478850467.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:47.557Z,1478850467.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:47.970Z,1478850467.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:48.015Z,1478850468.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:48.320Z,1478850468.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:48.336Z,1478850468.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:48.716Z,1478850468.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:48.731Z,1478850468.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:49.116Z,1478850469.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:49.132Z,1478850469.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:49.519Z,1478850469.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:49.541Z,1478850469.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:49.954Z,1478850469.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:49.990Z,1478850469.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:50.320Z,1478850470.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:50.336Z,1478850470.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:50.721Z,1478850470.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:50.742Z,1478850470.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:51.121Z,1478850471.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:51.141Z,1478850471.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:51.520Z,1478850471.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:51.536Z,1478850471.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:51.928Z,1478850471.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:51.981Z,1478850471.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:52.313Z,1478850472.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:52.353Z,1478850472.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:52.716Z,1478850472.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:52.732Z,1478850472.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:53.121Z,1478850473.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:53.136Z,1478850473.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:53.516Z,1478850473.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:53.531Z,1478850473.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:53.936Z,1478850473.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:53.970Z,1478850473.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:54.324Z,1478850474.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:54.345Z,1478850474.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:54.720Z,1478850474.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:54.734Z,1478850474.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:55.128Z,1478850475.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:55.153Z,1478850475.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:55.529Z,1478850475.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:55.545Z,1478850475.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:55.931Z,1478850475.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:56.015Z,1478850476.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:56.297Z,1478850476.297 [NAL9602](INFO): NAL9602 initialized
2016-11-11T07:47:56.314Z,1478850476.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:56.346Z,1478850476.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:56.713Z,1478850476.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:56.750Z,1478850476.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:57.097Z,1478850477.097 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T07:47:57.097Z,1478850477.097 [NAL9602] Data Fault, FailCount= 3
2016-11-11T07:47:57.097Z,1478850477.097 [NAL9602](ERROR): Data Fault
2016-11-11T07:47:57.114Z,1478850477.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:57.153Z,1478850477.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:57.193Z,1478850477.193 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T07:47:57.496Z,1478850477.497 [NAL9602](INFO): Powering down
2016-11-11T07:47:57.514Z,1478850477.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:57.533Z,1478850477.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:57.921Z,1478850477.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:57.936Z,1478850477.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:58.324Z,1478850478.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:58.374Z,1478850478.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:58.414Z,1478850478.414 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T07:47:58.414Z,1478850478.414 [NAL9602] No Fault, FailCount= 3
2016-11-11T07:47:58.720Z,1478850478.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:58.735Z,1478850478.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:59.120Z,1478850479.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:59.136Z,1478850479.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:59.519Z,1478850479.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:59.538Z,1478850479.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:47:59.924Z,1478850479.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:47:59.989Z,1478850479.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:00.324Z,1478850480.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:00.361Z,1478850480.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:00.713Z,1478850480.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:00.762Z,1478850480.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:01.113Z,1478850481.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:01.145Z,1478850481.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:01.515Z,1478850481.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:01.601Z,1478850481.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:01.922Z,1478850481.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:01.996Z,1478850481.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:02.315Z,1478850482.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:02.362Z,1478850482.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:02.737Z,1478850482.737 [NAL9602](INFO): Powering up NAL9602
2016-11-11T07:48:02.767Z,1478850482.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:02.814Z,1478850482.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:03.123Z,1478850483.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:03.170Z,1478850483.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:03.522Z,1478850483.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:03.546Z,1478850483.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:03.926Z,1478850483.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:03.989Z,1478850483.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:04.318Z,1478850484.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:04.379Z,1478850484.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:04.725Z,1478850484.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:04.770Z,1478850484.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:05.125Z,1478850485.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:05.154Z,1478850485.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:05.515Z,1478850485.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:05.556Z,1478850485.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:05.914Z,1478850485.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:05.946Z,1478850485.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:06.337Z,1478850486.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:06.386Z,1478850486.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:06.715Z,1478850486.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:06.753Z,1478850486.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:07.115Z,1478850487.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:07.158Z,1478850487.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:07.515Z,1478850487.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:07.554Z,1478850487.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:07.925Z,1478850487.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:07.983Z,1478850487.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:08.346Z,1478850488.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:08.400Z,1478850488.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:08.723Z,1478850488.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:08.752Z,1478850488.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:09.115Z,1478850489.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:09.149Z,1478850489.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:09.523Z,1478850489.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:09.550Z,1478850489.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:09.584Z,1478850489.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:09.977Z,1478850489.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:10.017Z,1478850490.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:10.319Z,1478850490.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:10.368Z,1478850490.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:10.380Z,1478850490.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:10.731Z,1478850490.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:10.746Z,1478850490.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:10.788Z,1478850490.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:11.116Z,1478850491.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:11.146Z,1478850491.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:11.534Z,1478850491.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:11.557Z,1478850491.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:11.584Z,1478850491.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:11.916Z,1478850491.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:11.952Z,1478850491.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:12.313Z,1478850492.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:12.369Z,1478850492.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:12.388Z,1478850492.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:12.721Z,1478850492.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:12.758Z,1478850492.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:12.796Z,1478850492.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:13.125Z,1478850493.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:13.170Z,1478850493.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:13.536Z,1478850493.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:13.568Z,1478850493.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:13.592Z,1478850493.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:13.905Z,1478850493.905 [NAL9602](INFO): NAL9602 initialized
2016-11-11T07:48:13.921Z,1478850493.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:14.021Z,1478850494.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:14.321Z,1478850494.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:14.337Z,1478850494.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:14.389Z,1478850494.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:14.749Z,1478850494.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:14.796Z,1478850494.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:14.829Z,1478850494.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:15.136Z,1478850495.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:15.152Z,1478850495.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:15.536Z,1478850495.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:15.589Z,1478850495.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:15.592Z,1478850495.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:15.928Z,1478850495.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:15.990Z,1478850495.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:16.313Z,1478850496.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:16.347Z,1478850496.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:16.388Z,1478850496.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:16.714Z,1478850496.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:16.741Z,1478850496.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:16.796Z,1478850496.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:17.128Z,1478850497.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:17.152Z,1478850497.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:17.535Z,1478850497.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:17.550Z,1478850497.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:17.592Z,1478850497.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:17.947Z,1478850497.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:17.969Z,1478850497.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:18.313Z,1478850498.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:18.320Z,1478850498.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:18.330Z,1478850498.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:18.713Z,1478850498.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:18.733Z,1478850498.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:19.116Z,1478850499.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:19.118Z,1478850499.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:19.133Z,1478850499.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:19.518Z,1478850499.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:19.538Z,1478850499.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:19.912Z,1478850499.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:19.932Z,1478850499.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:19.985Z,1478850499.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:20.321Z,1478850500.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:20.337Z,1478850500.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:20.344Z,1478850500.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:20.716Z,1478850500.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:20.749Z,1478850500.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:21.120Z,1478850501.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:21.140Z,1478850501.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:21.150Z,1478850501.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:21.513Z,1478850501.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:21.550Z,1478850501.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:21.937Z,1478850501.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:21.944Z,1478850501.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:21.960Z,1478850501.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:22.336Z,1478850502.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:22.344Z,1478850502.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:22.368Z,1478850502.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:22.728Z,1478850502.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:22.764Z,1478850502.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:23.124Z,1478850503.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:23.140Z,1478850503.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:23.153Z,1478850503.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:23.513Z,1478850503.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:23.553Z,1478850503.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:23.932Z,1478850503.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:23.937Z,1478850503.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:23.978Z,1478850503.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:24.321Z,1478850504.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:24.341Z,1478850504.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:24.424Z,1478850504.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:24.721Z,1478850504.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:24.741Z,1478850504.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:25.121Z,1478850505.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:25.137Z,1478850505.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:25.220Z,1478850505.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:25.525Z,1478850505.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:25.540Z,1478850505.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:25.920Z,1478850505.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:25.941Z,1478850505.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:26.016Z,1478850506.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:26.314Z,1478850506.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:26.345Z,1478850506.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:26.660Z,1478850506.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:26.725Z,1478850506.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:26.745Z,1478850506.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:27.135Z,1478850507.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:27.188Z,1478850507.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:27.456Z,1478850507.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:27.536Z,1478850507.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:27.589Z,1478850507.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:27.936Z,1478850507.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:27.994Z,1478850507.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:28.252Z,1478850508.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:28.324Z,1478850508.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:28.345Z,1478850508.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:28.717Z,1478850508.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:28.733Z,1478850508.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:29.048Z,1478850509.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:29.113Z,1478850509.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:29.161Z,1478850509.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:29.517Z,1478850509.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:29.532Z,1478850509.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:29.844Z,1478850509.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:29.923Z,1478850509.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:29.969Z,1478850509.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:30.317Z,1478850510.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:30.337Z,1478850510.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:30.640Z,1478850510.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:30.785Z,1478850510.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:30.833Z,1478850510.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:31.117Z,1478850511.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:31.133Z,1478850511.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:31.436Z,1478850511.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:31.513Z,1478850511.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:31.534Z,1478850511.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:31.913Z,1478850511.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:31.933Z,1478850511.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:32.232Z,1478850512.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:32.332Z,1478850512.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:32.347Z,1478850512.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:32.724Z,1478850512.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:32.739Z,1478850512.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:33.028Z,1478850513.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:33.132Z,1478850513.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:33.153Z,1478850513.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:33.528Z,1478850513.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:33.543Z,1478850513.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:33.824Z,1478850513.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:33.917Z,1478850513.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:33.937Z,1478850513.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:34.317Z,1478850514.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:34.337Z,1478850514.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:34.620Z,1478850514.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:34.717Z,1478850514.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:34.733Z,1478850514.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:35.117Z,1478850515.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:35.137Z,1478850515.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:35.416Z,1478850515.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:35.517Z,1478850515.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:35.533Z,1478850515.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:35.917Z,1478850515.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:35.933Z,1478850515.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:36.212Z,1478850516.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:36.317Z,1478850516.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:36.337Z,1478850516.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:36.717Z,1478850516.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:36.737Z,1478850516.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:37.008Z,1478850517.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:37.114Z,1478850517.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:37.129Z,1478850517.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:37.532Z,1478850517.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:37.547Z,1478850517.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:37.804Z,1478850517.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:37.969Z,1478850517.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:38.008Z,1478850518.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:38.236Z,1478850518.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:38.331Z,1478850518.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:38.390Z,1478850518.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:38.644Z,1478850518.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:38.726Z,1478850518.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:38.758Z,1478850518.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:39.052Z,1478850519.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:39.115Z,1478850519.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:39.158Z,1478850519.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:39.460Z,1478850519.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:39.515Z,1478850519.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:39.551Z,1478850519.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:39.868Z,1478850519.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:39.915Z,1478850519.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:39.947Z,1478850519.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:40.276Z,1478850520.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:40.326Z,1478850520.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:40.362Z,1478850520.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:40.684Z,1478850520.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:40.716Z,1478850520.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:40.748Z,1478850520.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:41.134Z,1478850521.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:41.158Z,1478850521.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:41.480Z,1478850521.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:41.514Z,1478850521.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:41.538Z,1478850521.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:41.939Z,1478850521.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:41.972Z,1478850521.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:42.276Z,1478850522.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:42.684Z,1478850522.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:43.480Z,1478850523.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:44.276Z,1478850524.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:44.684Z,1478850524.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:45.481Z,1478850525.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:46.276Z,1478850526.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:46.684Z,1478850526.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:47.480Z,1478850527.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:48.277Z,1478850528.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:48.684Z,1478850528.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:49.480Z,1478850529.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:50.276Z,1478850530.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:50.684Z,1478850530.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:51.480Z,1478850531.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:52.276Z,1478850532.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:52.390Z,1478850532.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:52.424Z,1478850532.424 [BPC1](ERROR): Failed to receive battery data
2016-11-11T07:48:52.424Z,1478850532.424 [BPC1] Communications Fault, FailCount= 1
2016-11-11T07:48:52.424Z,1478850532.424 [BPC1](ERROR): Communications Fault
2016-11-11T07:48:52.441Z,1478850532.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:52.502Z,1478850532.502 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T07:48:52.580Z,1478850532.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:52.624Z,1478850532.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:52.684Z,1478850532.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:52.949Z,1478850532.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:52.982Z,1478850532.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:53.351Z,1478850533.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:53.386Z,1478850533.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:53.459Z,1478850533.459 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:48:53.459Z,1478850533.459 [BPC1] No Fault, FailCount= 1
2016-11-11T07:48:53.480Z,1478850533.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:53.759Z,1478850533.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:53.862Z,1478850533.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:54.180Z,1478850534.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:54.264Z,1478850534.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:54.276Z,1478850534.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:54.553Z,1478850534.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:54.592Z,1478850534.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:54.684Z,1478850534.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:54.956Z,1478850534.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:54.996Z,1478850534.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:55.356Z,1478850535.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:55.377Z,1478850535.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:55.480Z,1478850535.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:55.755Z,1478850535.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:55.771Z,1478850535.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:56.163Z,1478850536.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:56.210Z,1478850536.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:56.276Z,1478850536.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:56.545Z,1478850536.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:56.565Z,1478850536.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:56.684Z,1478850536.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:56.947Z,1478850536.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:56.964Z,1478850536.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:57.352Z,1478850537.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:57.389Z,1478850537.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:57.480Z,1478850537.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:57.749Z,1478850537.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:57.764Z,1478850537.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:58.167Z,1478850538.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:58.182Z,1478850538.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:58.268Z,1478850538.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:58.567Z,1478850538.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:58.583Z,1478850538.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:58.948Z,1478850538.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:58.982Z,1478850538.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:59.064Z,1478850539.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:59.345Z,1478850539.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:59.377Z,1478850539.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:59.745Z,1478850539.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:48:59.817Z,1478850539.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:48:59.860Z,1478850539.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:00.156Z,1478850540.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:00.171Z,1478850540.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:00.276Z,1478850540.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:00.549Z,1478850540.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:00.576Z,1478850540.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:00.953Z,1478850540.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:00.977Z,1478850540.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:01.072Z,1478850541.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:01.345Z,1478850541.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:01.380Z,1478850541.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:01.748Z,1478850541.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:01.835Z,1478850541.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:01.868Z,1478850541.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:02.150Z,1478850542.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:02.166Z,1478850542.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:02.276Z,1478850542.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:02.564Z,1478850542.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:02.597Z,1478850542.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:02.956Z,1478850542.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:02.989Z,1478850542.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:03.072Z,1478850543.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:03.364Z,1478850543.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:03.400Z,1478850543.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:03.760Z,1478850543.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:03.835Z,1478850543.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:03.868Z,1478850543.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:04.148Z,1478850544.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:04.176Z,1478850544.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:04.276Z,1478850544.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:04.561Z,1478850544.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:04.577Z,1478850544.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:04.956Z,1478850544.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:04.972Z,1478850544.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:05.072Z,1478850545.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:05.361Z,1478850545.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:05.377Z,1478850545.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:05.761Z,1478850545.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:05.777Z,1478850545.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:05.869Z,1478850545.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:06.157Z,1478850546.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:06.217Z,1478850546.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:06.292Z,1478850546.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:06.552Z,1478850546.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:06.599Z,1478850546.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:06.965Z,1478850546.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:06.989Z,1478850546.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:07.088Z,1478850547.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:07.359Z,1478850547.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:07.405Z,1478850547.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:07.756Z,1478850547.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:07.771Z,1478850547.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:07.884Z,1478850547.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:08.179Z,1478850548.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:08.234Z,1478850548.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:08.562Z,1478850548.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:08.609Z,1478850548.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:08.620Z,1478850548.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:08.952Z,1478850548.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:08.968Z,1478850548.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:09.348Z,1478850549.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:09.380Z,1478850549.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:09.416Z,1478850549.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:09.747Z,1478850549.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:09.773Z,1478850549.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:10.172Z,1478850550.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:10.206Z,1478850550.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:10.212Z,1478850550.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:10.549Z,1478850550.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:10.585Z,1478850550.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:10.644Z,1478850550.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:10.945Z,1478850550.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:10.961Z,1478850550.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:11.346Z,1478850551.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:11.361Z,1478850551.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:11.440Z,1478850551.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:11.749Z,1478850551.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:11.829Z,1478850551.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:12.154Z,1478850552.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:12.173Z,1478850552.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:12.236Z,1478850552.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:12.564Z,1478850552.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:12.588Z,1478850552.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:12.644Z,1478850552.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:12.963Z,1478850552.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:12.979Z,1478850552.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:13.368Z,1478850553.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:13.389Z,1478850553.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:13.440Z,1478850553.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:13.795Z,1478850553.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:13.842Z,1478850553.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:14.145Z,1478850554.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:14.161Z,1478850554.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:14.236Z,1478850554.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:14.554Z,1478850554.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:14.569Z,1478850554.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:14.644Z,1478850554.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:14.953Z,1478850554.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:14.977Z,1478850554.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:15.351Z,1478850555.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:15.367Z,1478850555.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:15.440Z,1478850555.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:15.765Z,1478850555.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:15.815Z,1478850555.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:16.145Z,1478850556.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:16.185Z,1478850556.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:16.236Z,1478850556.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:16.549Z,1478850556.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:16.582Z,1478850556.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:16.644Z,1478850556.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:16.949Z,1478850556.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:16.964Z,1478850556.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:17.349Z,1478850557.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:17.393Z,1478850557.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:17.440Z,1478850557.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:17.792Z,1478850557.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:17.828Z,1478850557.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:18.164Z,1478850558.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:18.179Z,1478850558.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:18.236Z,1478850558.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:18.566Z,1478850558.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:18.581Z,1478850558.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:18.644Z,1478850558.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:19.004Z,1478850559.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:19.020Z,1478850559.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:19.345Z,1478850559.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:19.377Z,1478850559.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:19.440Z,1478850559.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:19.749Z,1478850559.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:19.769Z,1478850559.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:20.145Z,1478850560.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:20.189Z,1478850560.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:20.236Z,1478850560.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:20.550Z,1478850560.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:20.593Z,1478850560.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:20.945Z,1478850560.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:20.965Z,1478850560.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:21.032Z,1478850561.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:21.349Z,1478850561.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:21.365Z,1478850561.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:21.440Z,1478850561.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:21.750Z,1478850561.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:21.793Z,1478850561.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:22.153Z,1478850562.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:22.194Z,1478850562.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:22.236Z,1478850562.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:22.550Z,1478850562.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:22.596Z,1478850562.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:22.644Z,1478850562.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:22.968Z,1478850562.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:23.025Z,1478850563.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:23.364Z,1478850563.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:23.400Z,1478850563.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:23.440Z,1478850563.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:23.760Z,1478850563.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:23.775Z,1478850563.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:24.164Z,1478850564.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:24.197Z,1478850564.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:24.236Z,1478850564.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:24.545Z,1478850564.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:24.586Z,1478850564.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:24.644Z,1478850564.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:24.945Z,1478850564.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:24.965Z,1478850564.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:25.353Z,1478850565.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:25.368Z,1478850565.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:25.440Z,1478850565.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:25.755Z,1478850565.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:25.809Z,1478850565.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:26.145Z,1478850566.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:26.177Z,1478850566.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:26.236Z,1478850566.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:26.550Z,1478850566.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:26.582Z,1478850566.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:26.644Z,1478850566.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:26.945Z,1478850566.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:26.981Z,1478850566.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:27.345Z,1478850567.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:27.382Z,1478850567.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:27.440Z,1478850567.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:27.779Z,1478850567.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:27.800Z,1478850567.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:28.160Z,1478850568.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:28.191Z,1478850568.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:28.236Z,1478850568.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:28.560Z,1478850568.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:28.587Z,1478850568.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:28.644Z,1478850568.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:28.960Z,1478850568.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:28.000Z,1478850569.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:29.356Z,1478850569.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:29.377Z,1478850569.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:29.440Z,1478850569.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:29.769Z,1478850569.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:29.806Z,1478850569.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:30.152Z,1478850570.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:30.174Z,1478850570.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:30.236Z,1478850570.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:30.545Z,1478850570.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:30.578Z,1478850570.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:30.644Z,1478850570.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:30.949Z,1478850570.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:30.991Z,1478850570.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:31.346Z,1478850571.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:31.377Z,1478850571.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:31.440Z,1478850571.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:31.769Z,1478850571.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:31.799Z,1478850571.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:32.145Z,1478850572.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:32.161Z,1478850572.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:32.236Z,1478850572.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:32.545Z,1478850572.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:32.565Z,1478850572.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:32.644Z,1478850572.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:32.949Z,1478850572.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:32.965Z,1478850572.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:33.364Z,1478850573.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:33.398Z,1478850573.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:33.440Z,1478850573.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:33.760Z,1478850573.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:33.856Z,1478850573.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:34.164Z,1478850574.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:34.195Z,1478850574.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:34.236Z,1478850574.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:34.556Z,1478850574.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:34.572Z,1478850574.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:34.644Z,1478850574.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:34.948Z,1478850574.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:35.037Z,1478850575.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:35.345Z,1478850575.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:35.381Z,1478850575.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:35.440Z,1478850575.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:35.745Z,1478850575.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:35.793Z,1478850575.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:36.150Z,1478850576.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:36.193Z,1478850576.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:36.236Z,1478850576.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:36.545Z,1478850576.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:36.597Z,1478850576.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:36.644Z,1478850576.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:36.945Z,1478850576.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:36.993Z,1478850576.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:37.354Z,1478850577.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:37.385Z,1478850577.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:37.440Z,1478850577.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:37.749Z,1478850577.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:37.772Z,1478850577.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:38.165Z,1478850578.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:38.183Z,1478850578.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:38.236Z,1478850578.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:38.571Z,1478850578.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:38.593Z,1478850578.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:38.644Z,1478850578.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:38.959Z,1478850578.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:38.993Z,1478850578.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:39.367Z,1478850579.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:39.382Z,1478850579.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:39.440Z,1478850579.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:39.786Z,1478850579.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:39.841Z,1478850579.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:40.146Z,1478850580.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:40.165Z,1478850580.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:40.208Z,1478850580.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:40.545Z,1478850580.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:40.565Z,1478850580.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:40.952Z,1478850580.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:40.968Z,1478850580.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:41.004Z,1478850581.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:41.353Z,1478850581.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:41.373Z,1478850581.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:41.794Z,1478850581.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:41.800Z,1478850581.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:41.827Z,1478850581.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:42.157Z,1478850582.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:42.177Z,1478850582.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:42.216Z,1478850582.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:43.012Z,1478850583.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:43.808Z,1478850583.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:44.216Z,1478850584.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:45.012Z,1478850585.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:45.513Z,1478850585.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:45.533Z,1478850585.533 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:45.533Z,1478850585.533 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2016-11-11T07:49:45.534Z,1478850585.533 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:49:45.560Z,1478850585.560 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:45.560Z,1478850585.560 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 41
2016-11-11T07:49:45.560Z,1478850585.560 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:49:45.589Z,1478850585.589 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:49:45.590Z,1478850585.590 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:49:45.656Z,1478850585.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:45.766Z,1478850585.766 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:49:45.766Z,1478850585.766 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2016-11-11T07:49:45.775Z,1478850585.775 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:49:45.775Z,1478850585.775 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 41
2016-11-11T07:49:45.808Z,1478850585.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:46.046Z,1478850586.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:46.070Z,1478850586.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:49:46.070Z,1478850586.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:49:46.071Z,1478850586.071 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:49:46.076Z,1478850586.076 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:49:46.077Z,1478850586.077 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:49:46.077Z,1478850586.077 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:49:46.216Z,1478850586.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:46.444Z,1478850586.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:46.478Z,1478850586.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:46.486Z,1478850586.486 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:46.486Z,1478850586.486 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 41
2016-11-11T07:49:46.486Z,1478850586.486 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:49:46.501Z,1478850586.501 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:49:46.837Z,1478850586.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:46.854Z,1478850586.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:46.928Z,1478850586.928 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:49:46.928Z,1478850586.928 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 41
2016-11-11T07:49:47.012Z,1478850587.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:47.234Z,1478850587.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:47.253Z,1478850587.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:47.259Z,1478850587.259 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:49:47.260Z,1478850587.260 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:49:47.260Z,1478850587.260 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:49:47.628Z,1478850587.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:47.658Z,1478850587.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:47.809Z,1478850587.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:48.041Z,1478850588.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:48.062Z,1478850588.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:48.216Z,1478850588.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:48.430Z,1478850588.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:48.468Z,1478850588.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:48.825Z,1478850588.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:48.893Z,1478850588.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:49.012Z,1478850589.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:49.225Z,1478850589.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:49.289Z,1478850589.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:49.637Z,1478850589.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:49.685Z,1478850589.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:49.808Z,1478850589.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:50.025Z,1478850590.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:50.105Z,1478850590.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:50.451Z,1478850590.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:50.467Z,1478850590.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:50.564Z,1478850590.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:50.850Z,1478850590.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:50.907Z,1478850590.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:51.244Z,1478850591.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:51.300Z,1478850591.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:51.360Z,1478850591.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:51.650Z,1478850591.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:51.668Z,1478850591.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:52.034Z,1478850592.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:52.117Z,1478850592.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:52.156Z,1478850592.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:52.439Z,1478850592.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:52.455Z,1478850592.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:52.564Z,1478850592.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:52.839Z,1478850592.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:52.878Z,1478850592.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:53.238Z,1478850593.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:53.275Z,1478850593.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:53.360Z,1478850593.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:53.643Z,1478850593.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:53.671Z,1478850593.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:54.027Z,1478850594.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:54.052Z,1478850594.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:54.156Z,1478850594.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:54.441Z,1478850594.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:54.481Z,1478850594.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:54.564Z,1478850594.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:54.838Z,1478850594.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:54.867Z,1478850594.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:55.246Z,1478850595.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:55.257Z,1478850595.257 [PNI_TCM](ERROR): CRC does not match. Expected:0x19340 got:0x43814
2016-11-11T07:49:55.294Z,1478850595.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:55.360Z,1478850595.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:55.653Z,1478850595.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:55.673Z,1478850595.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:56.036Z,1478850596.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:56.073Z,1478850596.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:56.157Z,1478850596.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:56.441Z,1478850596.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:56.470Z,1478850596.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:56.564Z,1478850596.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:56.842Z,1478850596.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:56.857Z,1478850596.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:57.231Z,1478850597.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:57.254Z,1478850597.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:57.360Z,1478850597.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:57.633Z,1478850597.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:57.665Z,1478850597.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:58.034Z,1478850598.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:58.064Z,1478850598.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:58.156Z,1478850598.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:58.426Z,1478850598.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:58.456Z,1478850598.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:58.564Z,1478850598.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:58.831Z,1478850598.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:58.847Z,1478850598.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:59.229Z,1478850599.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:59.268Z,1478850599.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:49:59.360Z,1478850599.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:59.634Z,1478850599.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:49:59.694Z,1478850599.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:00.032Z,1478850600.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:00.053Z,1478850600.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:00.156Z,1478850600.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:00.442Z,1478850600.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:00.473Z,1478850600.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:00.564Z,1478850600.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:00.845Z,1478850600.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:00.863Z,1478850600.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:01.249Z,1478850601.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:01.264Z,1478850601.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:01.360Z,1478850601.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:01.648Z,1478850601.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:01.673Z,1478850601.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:02.052Z,1478850602.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:02.081Z,1478850602.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:02.157Z,1478850602.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:02.437Z,1478850602.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:02.473Z,1478850602.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:02.564Z,1478850602.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:02.836Z,1478850602.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:02.843Z,1478850602.843 [PNI_TCM](ERROR): CRC does not match. Expected:0x50708 got:0x32263
2016-11-11T07:50:02.881Z,1478850602.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:03.236Z,1478850603.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:03.285Z,1478850603.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:03.360Z,1478850603.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:03.634Z,1478850603.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:03.689Z,1478850603.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:04.036Z,1478850604.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:04.103Z,1478850604.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:04.156Z,1478850604.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:04.426Z,1478850604.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:04.481Z,1478850604.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:04.564Z,1478850604.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:04.827Z,1478850604.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:04.863Z,1478850604.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:05.231Z,1478850605.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:05.304Z,1478850605.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:05.360Z,1478850605.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:05.625Z,1478850605.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:05.681Z,1478850605.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:06.062Z,1478850606.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:06.123Z,1478850606.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:06.156Z,1478850606.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:06.462Z,1478850606.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:06.482Z,1478850606.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:06.568Z,1478850606.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:06.840Z,1478850606.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:06.861Z,1478850606.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:07.240Z,1478850607.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:07.261Z,1478850607.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:07.364Z,1478850607.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:07.630Z,1478850607.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:07.653Z,1478850607.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:08.028Z,1478850608.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:08.053Z,1478850608.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:08.160Z,1478850608.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:08.437Z,1478850608.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:08.452Z,1478850608.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:08.835Z,1478850608.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:08.860Z,1478850608.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:08.956Z,1478850608.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:09.234Z,1478850609.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:09.254Z,1478850609.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:09.641Z,1478850609.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:09.697Z,1478850609.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:09.752Z,1478850609.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:10.044Z,1478850610.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:10.067Z,1478850610.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:10.160Z,1478850610.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:10.447Z,1478850610.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:10.466Z,1478850610.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:10.827Z,1478850610.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:10.865Z,1478850610.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:10.956Z,1478850610.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:11.256Z,1478850611.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:11.278Z,1478850611.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:11.685Z,1478850611.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:11.733Z,1478850611.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:11.752Z,1478850611.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:12.046Z,1478850612.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:12.081Z,1478850612.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:12.160Z,1478850612.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:12.456Z,1478850612.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:12.472Z,1478850612.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:12.830Z,1478850612.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:12.862Z,1478850612.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:12.956Z,1478850612.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:13.229Z,1478850613.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:13.257Z,1478850613.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:13.632Z,1478850613.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:13.676Z,1478850613.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:13.752Z,1478850613.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:14.029Z,1478850614.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:14.065Z,1478850614.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:14.160Z,1478850614.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:14.434Z,1478850614.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:14.449Z,1478850614.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:14.828Z,1478850614.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:14.856Z,1478850614.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:14.956Z,1478850614.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:15.229Z,1478850615.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:15.265Z,1478850615.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:15.628Z,1478850615.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:15.661Z,1478850615.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:15.752Z,1478850615.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:16.037Z,1478850616.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:16.062Z,1478850616.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:16.192Z,1478850616.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:16.440Z,1478850616.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:16.465Z,1478850616.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:16.840Z,1478850616.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:16.862Z,1478850616.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:16.988Z,1478850616.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:17.240Z,1478850617.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:17.278Z,1478850617.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:17.644Z,1478850617.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:17.733Z,1478850617.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:17.784Z,1478850617.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:18.071Z,1478850618.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:18.103Z,1478850618.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:18.431Z,1478850618.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:18.479Z,1478850618.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:18.520Z,1478850618.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:18.831Z,1478850618.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:18.858Z,1478850618.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:19.226Z,1478850619.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:19.293Z,1478850619.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:19.316Z,1478850619.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:19.644Z,1478850619.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:19.695Z,1478850619.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:20.065Z,1478850620.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:20.098Z,1478850620.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:20.112Z,1478850620.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:20.426Z,1478850620.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:20.443Z,1478850620.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:20.520Z,1478850620.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:20.825Z,1478850620.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:20.842Z,1478850620.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:21.229Z,1478850621.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:21.245Z,1478850621.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:21.316Z,1478850621.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:21.669Z,1478850621.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:21.722Z,1478850621.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:22.044Z,1478850622.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:22.076Z,1478850622.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:22.112Z,1478850622.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:22.440Z,1478850622.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:22.456Z,1478850622.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:22.520Z,1478850622.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:22.840Z,1478850622.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:22.856Z,1478850622.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:23.246Z,1478850623.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:23.278Z,1478850623.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:23.316Z,1478850623.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:23.625Z,1478850623.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:23.711Z,1478850623.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:24.036Z,1478850624.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:24.070Z,1478850624.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:24.112Z,1478850624.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:24.426Z,1478850624.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:24.461Z,1478850624.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:24.520Z,1478850624.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:24.827Z,1478850624.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:24.862Z,1478850624.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:25.229Z,1478850625.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:25.261Z,1478850625.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:25.316Z,1478850625.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:25.625Z,1478850625.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:25.702Z,1478850625.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:26.029Z,1478850626.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:26.052Z,1478850626.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:26.112Z,1478850626.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:26.441Z,1478850626.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:26.456Z,1478850626.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:26.520Z,1478850626.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:26.848Z,1478850626.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:26.869Z,1478850626.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:27.236Z,1478850627.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:27.273Z,1478850627.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:27.316Z,1478850627.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:27.649Z,1478850627.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:27.697Z,1478850627.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:28.048Z,1478850628.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:28.081Z,1478850628.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:28.113Z,1478850628.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:28.442Z,1478850628.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:28.458Z,1478850628.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:28.520Z,1478850628.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:28.846Z,1478850628.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:28.891Z,1478850628.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:29.236Z,1478850629.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:29.253Z,1478850629.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:29.316Z,1478850629.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:29.628Z,1478850629.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:29.661Z,1478850629.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:30.027Z,1478850630.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:30.065Z,1478850630.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:30.112Z,1478850630.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:30.426Z,1478850630.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:30.463Z,1478850630.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:30.520Z,1478850630.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:30.826Z,1478850630.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:30.862Z,1478850630.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:31.225Z,1478850631.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:31.262Z,1478850631.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:31.316Z,1478850631.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:31.625Z,1478850631.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:31.689Z,1478850631.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:32.046Z,1478850632.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:32.112Z,1478850632.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:32.135Z,1478850632.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:32.443Z,1478850632.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:32.459Z,1478850632.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:32.520Z,1478850632.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:32.848Z,1478850632.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:32.864Z,1478850632.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:33.240Z,1478850633.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:33.291Z,1478850633.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:33.316Z,1478850633.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:33.625Z,1478850633.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:33.661Z,1478850633.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:34.056Z,1478850634.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:34.098Z,1478850634.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:34.112Z,1478850634.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:34.429Z,1478850634.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:34.449Z,1478850634.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:34.520Z,1478850634.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:34.829Z,1478850634.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:34.887Z,1478850634.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:35.229Z,1478850635.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:35.244Z,1478850635.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:35.316Z,1478850635.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:35.641Z,1478850635.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:35.695Z,1478850635.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:36.032Z,1478850636.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:36.047Z,1478850636.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:36.112Z,1478850636.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:36.433Z,1478850636.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:36.453Z,1478850636.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:36.520Z,1478850636.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:36.828Z,1478850636.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:36.861Z,1478850636.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:37.242Z,1478850637.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:37.257Z,1478850637.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:37.316Z,1478850637.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:37.661Z,1478850637.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:37.710Z,1478850637.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:38.044Z,1478850638.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:38.076Z,1478850638.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:38.108Z,1478850638.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:38.436Z,1478850638.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:38.470Z,1478850638.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:38.825Z,1478850638.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:38.869Z,1478850638.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:38.904Z,1478850638.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:39.225Z,1478850639.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:39.261Z,1478850639.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:39.675Z,1478850639.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:39.708Z,1478850639.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:39.709Z,1478850639.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:40.048Z,1478850640.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:40.097Z,1478850640.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:40.132Z,1478850640.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:40.446Z,1478850640.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:40.472Z,1478850640.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:40.825Z,1478850640.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:40.857Z,1478850640.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:40.929Z,1478850640.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:41.226Z,1478850641.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:41.261Z,1478850641.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:41.673Z,1478850641.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:41.700Z,1478850641.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:41.724Z,1478850641.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:42.048Z,1478850642.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:42.080Z,1478850642.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:42.140Z,1478850642.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:42.440Z,1478850642.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:42.465Z,1478850642.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:42.936Z,1478850642.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:43.732Z,1478850643.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:44.140Z,1478850644.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:44.936Z,1478850644.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:45.732Z,1478850645.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:46.076Z,1478850646.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:46.094Z,1478850646.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:46.197Z,1478850646.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:46.222Z,1478850646.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:46.444Z,1478850646.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:46.586Z,1478850646.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:46.664Z,1478850646.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:46.980Z,1478850646.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:47.008Z,1478850647.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:47.240Z,1478850647.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:47.389Z,1478850647.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:47.404Z,1478850647.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:47.785Z,1478850647.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:47.838Z,1478850647.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:48.036Z,1478850648.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:48.177Z,1478850648.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:48.203Z,1478850648.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:48.444Z,1478850648.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:48.577Z,1478850648.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:48.635Z,1478850648.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:48.978Z,1478850648.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:49.035Z,1478850649.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:49.240Z,1478850649.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:49.377Z,1478850649.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:49.409Z,1478850649.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:49.777Z,1478850649.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:49.803Z,1478850649.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:50.036Z,1478850650.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:50.189Z,1478850650.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:50.212Z,1478850650.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:50.444Z,1478850650.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:50.577Z,1478850650.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:50.609Z,1478850650.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:50.977Z,1478850650.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:51.009Z,1478850651.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:51.240Z,1478850651.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:51.377Z,1478850651.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:51.412Z,1478850651.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:51.784Z,1478850651.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:51.801Z,1478850651.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:52.036Z,1478850652.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:52.192Z,1478850652.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:52.207Z,1478850652.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:52.444Z,1478850652.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:52.585Z,1478850652.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:52.608Z,1478850652.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:52.980Z,1478850652.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:53.012Z,1478850653.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:53.240Z,1478850653.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:53.385Z,1478850653.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:53.401Z,1478850653.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:53.786Z,1478850653.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:53.809Z,1478850653.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:54.036Z,1478850654.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:54.189Z,1478850654.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:54.211Z,1478850654.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:54.444Z,1478850654.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:54.599Z,1478850654.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:54.614Z,1478850654.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:55.003Z,1478850655.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:55.025Z,1478850655.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:55.242Z,1478850655.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:55.377Z,1478850655.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:55.413Z,1478850655.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:55.777Z,1478850655.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:55.801Z,1478850655.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:56.036Z,1478850656.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:56.186Z,1478850656.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:56.221Z,1478850656.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:56.444Z,1478850656.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:56.581Z,1478850656.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:56.621Z,1478850656.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:56.978Z,1478850656.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:57.000Z,1478850657.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:57.240Z,1478850657.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:57.389Z,1478850657.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:57.425Z,1478850657.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:57.784Z,1478850657.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:57.805Z,1478850657.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:58.036Z,1478850658.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:58.189Z,1478850658.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:58.209Z,1478850658.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:58.444Z,1478850658.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:58.596Z,1478850658.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:58.612Z,1478850658.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:58.995Z,1478850658.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:59.010Z,1478850659.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:59.240Z,1478850659.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:59.388Z,1478850659.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:59.404Z,1478850659.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:50:59.792Z,1478850659.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:50:59.813Z,1478850659.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:00.038Z,1478850660.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:00.193Z,1478850660.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:00.213Z,1478850660.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:00.444Z,1478850660.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:00.577Z,1478850660.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:00.609Z,1478850660.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:00.982Z,1478850660.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:01.061Z,1478850661.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:01.240Z,1478850661.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:01.377Z,1478850661.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:01.417Z,1478850661.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:01.777Z,1478850661.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:01.793Z,1478850661.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:02.036Z,1478850662.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:02.177Z,1478850662.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:02.229Z,1478850662.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:02.444Z,1478850662.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:02.581Z,1478850662.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:02.596Z,1478850662.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:02.999Z,1478850663.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:03.049Z,1478850663.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:03.240Z,1478850663.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:03.392Z,1478850663.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:03.437Z,1478850663.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:03.792Z,1478850663.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:03.807Z,1478850663.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:04.036Z,1478850664.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:04.200Z,1478850664.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:04.231Z,1478850664.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:04.444Z,1478850664.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:04.580Z,1478850664.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:04.613Z,1478850664.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:04.980Z,1478850664.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:05.008Z,1478850665.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:05.240Z,1478850665.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:05.385Z,1478850665.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:05.405Z,1478850665.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:05.794Z,1478850665.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:05.817Z,1478850665.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:06.036Z,1478850666.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:06.190Z,1478850666.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:06.209Z,1478850666.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:06.444Z,1478850666.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:06.577Z,1478850666.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:06.609Z,1478850666.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:06.982Z,1478850666.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:07.009Z,1478850667.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:07.240Z,1478850667.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:07.377Z,1478850667.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:07.409Z,1478850667.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:07.796Z,1478850667.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:07.812Z,1478850667.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:08.036Z,1478850668.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:08.208Z,1478850668.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:08.223Z,1478850668.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:08.599Z,1478850668.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:08.618Z,1478850668.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:08.832Z,1478850668.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:08.997Z,1478850668.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:09.013Z,1478850669.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:09.378Z,1478850669.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:09.413Z,1478850669.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:09.629Z,1478850669.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:09.786Z,1478850669.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:09.822Z,1478850669.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:10.036Z,1478850670.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:10.178Z,1478850670.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:10.221Z,1478850670.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:10.582Z,1478850670.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:10.597Z,1478850670.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:10.832Z,1478850670.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:10.982Z,1478850670.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:10.997Z,1478850670.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:11.382Z,1478850671.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:11.400Z,1478850671.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:11.634Z,1478850671.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:11.790Z,1478850671.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:11.809Z,1478850671.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:12.088Z,1478850672.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:12.180Z,1478850672.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:12.213Z,1478850672.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:12.594Z,1478850672.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:12.617Z,1478850672.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:12.884Z,1478850672.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:12.996Z,1478850672.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:13.012Z,1478850673.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:13.402Z,1478850673.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:13.418Z,1478850673.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:13.680Z,1478850673.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:13.796Z,1478850673.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:13.820Z,1478850673.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:14.177Z,1478850674.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:14.214Z,1478850674.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:14.392Z,1478850674.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:14.577Z,1478850674.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:14.609Z,1478850674.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:14.783Z,1478850674.783 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T07:51:14.783Z,1478850674.783 [Rowe_600LCM] Communications Fault, FailCount= 4
2016-11-11T07:51:14.783Z,1478850674.783 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T07:51:14.977Z,1478850674.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:15.009Z,1478850675.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T07:51:15.010Z,1478850675.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:15.032Z,1478850675.032 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T07:51:15.187Z,1478850675.187 [Rowe_600LCM](INFO): Powering down
2016-11-11T07:51:15.377Z,1478850675.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:15.449Z,1478850675.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T07:51:15.450Z,1478850675.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:15.777Z,1478850675.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:15.817Z,1478850675.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:51:15.818Z,1478850675.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:16.007Z,1478850676.007 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2016-11-11T07:51:16.007Z,1478850676.007 [Rowe_600LCM] Hardware Fault, FailCount= 4
2016-11-11T07:51:16.007Z,1478850676.007 [Rowe_600LCM](ERROR): Hardware Fault
2016-11-11T07:51:16.177Z,1478850676.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:16.192Z,1478850676.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:51:16.194Z,1478850676.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:16.582Z,1478850676.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:16.621Z,1478850676.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:51:16.622Z,1478850676.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:16.643Z,1478850676.643 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T07:51:16.643Z,1478850676.643 [Rowe_600LCM] No Fault, FailCount= 4
2016-11-11T07:51:16.815Z,1478850676.815 [Rowe_600LCM](INFO): Initializing
2016-11-11T07:51:16.816Z,1478850676.816 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T07:51:16.816Z,1478850676.816 [Rowe_600LCM](INFO): LCM OK
2016-11-11T07:51:16.816Z,1478850676.816 [Rowe_600LCM](INFO): Powering up
2016-11-11T07:51:16.977Z,1478850676.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:16.997Z,1478850676.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:51:16.998Z,1478850676.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:17.383Z,1478850677.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:17.428Z,1478850677.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:51:17.429Z,1478850677.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:17.791Z,1478850677.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:17.838Z,1478850677.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:51:17.839Z,1478850677.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:18.188Z,1478850678.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:18.203Z,1478850678.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:51:18.204Z,1478850678.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:18.592Z,1478850678.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:18.607Z,1478850678.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:51:18.608Z,1478850678.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:18.992Z,1478850678.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:19.012Z,1478850679.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:51:19.014Z,1478850679.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:19.380Z,1478850679.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:19.403Z,1478850679.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:51:19.405Z,1478850679.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:19.784Z,1478850679.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:19.799Z,1478850679.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:51:19.800Z,1478850679.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:20.185Z,1478850680.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:20.200Z,1478850680.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:51:20.201Z,1478850680.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:20.580Z,1478850680.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:20.607Z,1478850680.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:51:20.612Z,1478850680.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:20.942Z,1478850680.941 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T07:51:21.011Z,1478850681.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:21.053Z,1478850681.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:51:21.054Z,1478850681.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:21.094Z,1478850681.094 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T07:51:21.096Z,1478850681.096 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T07:51:21.097Z,1478850681.097 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T07:51:21.098Z,1478850681.098 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T07:51:21.381Z,1478850681.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:21.414Z,1478850681.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T07:51:21.416Z,1478850681.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:21.785Z,1478850681.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:21.820Z,1478850681.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:22.183Z,1478850682.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:22.198Z,1478850682.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:22.578Z,1478850682.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:22.605Z,1478850682.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:22.992Z,1478850682.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:23.007Z,1478850683.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:23.396Z,1478850683.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:23.411Z,1478850683.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:23.799Z,1478850683.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:23.821Z,1478850683.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:24.194Z,1478850684.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:24.217Z,1478850684.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:24.577Z,1478850684.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:24.609Z,1478850684.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:24.978Z,1478850684.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:25.017Z,1478850685.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:25.378Z,1478850685.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:25.410Z,1478850685.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:25.777Z,1478850685.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:25.810Z,1478850685.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:26.177Z,1478850686.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:26.205Z,1478850686.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:26.581Z,1478850686.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:26.613Z,1478850686.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:26.977Z,1478850686.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:27.013Z,1478850687.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:27.377Z,1478850687.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:27.414Z,1478850687.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:27.786Z,1478850687.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:27.813Z,1478850687.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:28.211Z,1478850688.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:28.227Z,1478850688.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:28.591Z,1478850688.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:28.618Z,1478850688.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:29.005Z,1478850689.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:29.020Z,1478850689.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:29.388Z,1478850689.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:29.420Z,1478850689.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:29.778Z,1478850689.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:29.841Z,1478850689.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:30.180Z,1478850690.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:30.229Z,1478850690.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:30.584Z,1478850690.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:30.600Z,1478850690.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:30.985Z,1478850690.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:31.038Z,1478850691.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:31.377Z,1478850691.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:31.409Z,1478850691.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:31.777Z,1478850691.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:31.844Z,1478850691.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:32.177Z,1478850692.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:32.227Z,1478850692.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:32.593Z,1478850692.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:32.613Z,1478850692.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:32.977Z,1478850692.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:33.009Z,1478850693.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:33.400Z,1478850693.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:33.421Z,1478850693.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:33.796Z,1478850693.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:33.811Z,1478850693.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:34.204Z,1478850694.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:34.226Z,1478850694.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:34.592Z,1478850694.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:34.627Z,1478850694.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:34.977Z,1478850694.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:35.017Z,1478850695.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:35.377Z,1478850695.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:35.393Z,1478850695.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:35.782Z,1478850695.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:35.809Z,1478850695.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:36.185Z,1478850696.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:36.206Z,1478850696.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:36.585Z,1478850696.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:36.601Z,1478850696.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:36.985Z,1478850696.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:37.005Z,1478850697.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:37.389Z,1478850697.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:37.409Z,1478850697.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:37.777Z,1478850697.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:37.803Z,1478850697.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:38.177Z,1478850698.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:38.209Z,1478850698.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:38.599Z,1478850698.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:38.614Z,1478850698.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:38.996Z,1478850698.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:39.012Z,1478850699.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:39.401Z,1478850699.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:39.421Z,1478850699.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:39.788Z,1478850699.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:39.815Z,1478850699.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:40.193Z,1478850700.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:40.216Z,1478850700.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:40.577Z,1478850700.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:40.597Z,1478850700.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:40.981Z,1478850700.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:41.001Z,1478850701.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:41.385Z,1478850701.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:41.400Z,1478850701.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:41.784Z,1478850701.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:41.805Z,1478850701.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:42.180Z,1478850702.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:42.213Z,1478850702.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:42.585Z,1478850702.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:42.600Z,1478850702.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:46.200Z,1478850706.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:46.299Z,1478850706.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:46.416Z,1478850706.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:46.437Z,1478850706.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:46.776Z,1478850706.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:46.817Z,1478850706.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:47.180Z,1478850707.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:47.229Z,1478850707.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:47.582Z,1478850707.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:47.632Z,1478850707.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:47.973Z,1478850707.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:48.029Z,1478850708.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:48.370Z,1478850708.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:48.449Z,1478850708.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:48.761Z,1478850708.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:48.793Z,1478850708.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:49.162Z,1478850709.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:49.208Z,1478850709.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:49.567Z,1478850709.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:49.593Z,1478850709.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:49.984Z,1478850709.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:50.053Z,1478850710.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:50.365Z,1478850710.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:50.381Z,1478850710.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:50.780Z,1478850710.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:50.803Z,1478850710.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:51.173Z,1478850711.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:51.205Z,1478850711.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:51.589Z,1478850711.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:51.632Z,1478850711.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:51.990Z,1478850711.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:52.014Z,1478850712.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:52.361Z,1478850712.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:52.388Z,1478850712.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:52.761Z,1478850712.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:52.789Z,1478850712.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:53.162Z,1478850713.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:53.193Z,1478850713.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:53.584Z,1478850713.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:53.613Z,1478850713.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:53.961Z,1478850713.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:54.001Z,1478850714.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:54.361Z,1478850714.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:54.378Z,1478850714.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:54.761Z,1478850714.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:54.781Z,1478850714.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:55.166Z,1478850715.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:55.185Z,1478850715.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:55.618Z,1478850715.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:55.651Z,1478850715.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:55.983Z,1478850715.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:56.001Z,1478850716.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:56.381Z,1478850716.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:56.409Z,1478850716.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:56.784Z,1478850716.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:56.802Z,1478850716.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:57.186Z,1478850717.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:57.204Z,1478850717.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:57.565Z,1478850717.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:57.599Z,1478850717.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:57.991Z,1478850717.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:58.009Z,1478850718.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:58.361Z,1478850718.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:58.394Z,1478850718.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:58.761Z,1478850718.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:58.803Z,1478850718.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:59.166Z,1478850719.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:59.182Z,1478850719.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:59.562Z,1478850719.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:59.581Z,1478850719.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:51:59.961Z,1478850719.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:51:59.989Z,1478850719.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:00.368Z,1478850720.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:00.426Z,1478850720.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:00.764Z,1478850720.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:00.825Z,1478850720.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:01.183Z,1478850721.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:01.253Z,1478850721.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:01.588Z,1478850721.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:01.633Z,1478850721.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:01.980Z,1478850721.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:02.031Z,1478850722.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:02.380Z,1478850722.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:02.408Z,1478850722.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:02.767Z,1478850722.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:02.837Z,1478850722.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:03.161Z,1478850723.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:03.193Z,1478850723.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:03.568Z,1478850723.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:03.645Z,1478850723.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:03.962Z,1478850723.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:03.989Z,1478850723.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:04.366Z,1478850724.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:04.386Z,1478850724.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:04.761Z,1478850724.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:04.828Z,1478850724.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:05.173Z,1478850725.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:05.198Z,1478850725.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:05.564Z,1478850725.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:05.611Z,1478850725.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:05.961Z,1478850725.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:06.010Z,1478850726.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:06.386Z,1478850726.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:06.445Z,1478850726.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:06.772Z,1478850726.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:06.808Z,1478850726.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:07.171Z,1478850727.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:07.209Z,1478850727.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:07.576Z,1478850727.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:07.614Z,1478850727.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:07.966Z,1478850727.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:07.982Z,1478850727.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:08.365Z,1478850728.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:08.385Z,1478850728.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:08.765Z,1478850728.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:08.781Z,1478850728.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:09.166Z,1478850729.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:09.204Z,1478850729.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:09.598Z,1478850729.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:09.638Z,1478850729.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:09.969Z,1478850729.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:09.986Z,1478850729.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:10.364Z,1478850730.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:10.399Z,1478850730.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:10.772Z,1478850730.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:10.794Z,1478850730.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:10.832Z,1478850730.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:11.166Z,1478850731.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:11.202Z,1478850731.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:11.584Z,1478850731.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:11.602Z,1478850731.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:11.628Z,1478850731.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:11.991Z,1478850731.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:12.010Z,1478850732.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:12.375Z,1478850732.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:12.410Z,1478850732.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:12.772Z,1478850732.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:12.806Z,1478850732.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:13.165Z,1478850733.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:13.185Z,1478850733.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:13.569Z,1478850733.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:13.583Z,1478850733.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:13.968Z,1478850733.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:13.989Z,1478850733.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:14.364Z,1478850734.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:14.404Z,1478850734.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:14.765Z,1478850734.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:14.794Z,1478850734.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:15.164Z,1478850735.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:15.192Z,1478850735.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:15.568Z,1478850735.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:15.657Z,1478850735.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:15.961Z,1478850735.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:16.004Z,1478850736.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:16.361Z,1478850736.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:16.409Z,1478850736.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:16.783Z,1478850736.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:16.803Z,1478850736.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:17.185Z,1478850737.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:17.226Z,1478850737.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:17.576Z,1478850737.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:17.651Z,1478850737.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:17.972Z,1478850737.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:18.018Z,1478850738.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:18.361Z,1478850738.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:18.381Z,1478850738.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:18.762Z,1478850738.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:18.781Z,1478850738.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:19.168Z,1478850739.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:19.213Z,1478850739.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:19.565Z,1478850739.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:19.585Z,1478850739.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:19.970Z,1478850739.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:19.989Z,1478850739.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:20.364Z,1478850740.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:20.393Z,1478850740.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:20.769Z,1478850740.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:20.784Z,1478850740.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:21.164Z,1478850741.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:21.216Z,1478850741.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:21.561Z,1478850741.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:21.593Z,1478850741.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:21.980Z,1478850741.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:22.016Z,1478850742.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:22.376Z,1478850742.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:22.414Z,1478850742.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:22.784Z,1478850742.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:22.853Z,1478850742.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:23.171Z,1478850743.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:23.211Z,1478850743.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:23.586Z,1478850743.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:23.612Z,1478850743.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:23.966Z,1478850743.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:23.993Z,1478850743.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:24.361Z,1478850744.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:24.381Z,1478850744.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:24.764Z,1478850744.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:24.779Z,1478850744.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:25.165Z,1478850745.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:25.185Z,1478850745.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:25.569Z,1478850745.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:25.585Z,1478850745.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:25.969Z,1478850745.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:25.984Z,1478850745.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:26.373Z,1478850746.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:26.388Z,1478850746.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:26.770Z,1478850746.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:26.789Z,1478850746.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:27.187Z,1478850747.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:27.205Z,1478850747.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:27.579Z,1478850747.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:27.594Z,1478850747.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:27.982Z,1478850747.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:28.005Z,1478850748.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:28.387Z,1478850748.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:28.405Z,1478850748.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:28.761Z,1478850748.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:28.799Z,1478850748.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:29.161Z,1478850749.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:29.200Z,1478850749.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:29.561Z,1478850749.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:29.593Z,1478850749.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:29.966Z,1478850749.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:30.038Z,1478850750.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:30.369Z,1478850750.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:30.384Z,1478850750.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:30.769Z,1478850750.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:30.822Z,1478850750.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:31.173Z,1478850751.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:31.187Z,1478850751.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:31.570Z,1478850751.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:31.620Z,1478850751.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:31.965Z,1478850751.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:32.021Z,1478850752.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:32.380Z,1478850752.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:32.397Z,1478850752.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:32.778Z,1478850752.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:32.793Z,1478850752.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:33.182Z,1478850753.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:33.203Z,1478850753.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:33.579Z,1478850753.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:33.594Z,1478850753.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:33.962Z,1478850753.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:34.013Z,1478850754.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:34.361Z,1478850754.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:34.413Z,1478850754.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:34.765Z,1478850754.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:34.806Z,1478850754.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:35.161Z,1478850755.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:35.176Z,1478850755.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:35.561Z,1478850755.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:35.581Z,1478850755.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:35.966Z,1478850755.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:35.989Z,1478850755.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:36.368Z,1478850756.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:36.383Z,1478850756.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:36.769Z,1478850756.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:36.789Z,1478850756.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:37.182Z,1478850757.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:37.227Z,1478850757.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:37.582Z,1478850757.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:37.638Z,1478850757.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:37.973Z,1478850757.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:37.997Z,1478850757.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:38.366Z,1478850758.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:38.385Z,1478850758.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:38.769Z,1478850758.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:38.789Z,1478850758.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:39.165Z,1478850759.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:39.184Z,1478850759.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:39.583Z,1478850759.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:39.618Z,1478850759.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:39.993Z,1478850759.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:40.011Z,1478850760.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:40.366Z,1478850760.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:40.394Z,1478850760.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:40.761Z,1478850760.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:40.777Z,1478850760.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:41.162Z,1478850761.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:41.181Z,1478850761.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:41.566Z,1478850761.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:41.581Z,1478850761.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:41.607Z,1478850761.607 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T07:47:41.5Z
2016-11-11T07:52:41.607Z,1478850761.607 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T07:52:41.607Z,1478850761.607 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T07:52:41.977Z,1478850761.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:42.014Z,1478850762.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:42.881Z,1478850762.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:42.917Z,1478850762.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:43.007Z,1478850763.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:43.034Z,1478850763.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:46.419Z,1478850766.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:46.477Z,1478850766.477 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:46.477Z,1478850766.477 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2016-11-11T07:52:46.477Z,1478850766.477 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:52:46.492Z,1478850766.492 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:46.492Z,1478850766.492 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 42
2016-11-11T07:52:46.492Z,1478850766.492 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:52:46.524Z,1478850766.523 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:52:46.524Z,1478850766.524 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:52:46.565Z,1478850766.565 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0072.lzma
2016-11-11T07:52:46.606Z,1478850766.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:46.674Z,1478850766.674 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:52:46.674Z,1478850766.674 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2016-11-11T07:52:46.679Z,1478850766.679 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:52:46.679Z,1478850766.679 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 42
2016-11-11T07:52:46.962Z,1478850766.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:46.998Z,1478850766.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:52:46.999Z,1478850766.999 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:52:46.999Z,1478850766.999 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:52:47.004Z,1478850767.003 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:52:47.004Z,1478850767.004 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:52:47.004Z,1478850767.004 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:52:47.333Z,1478850767.333 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0072.lzma.bak
2016-11-11T07:52:47.333Z,1478850767.333 [DataOverHttps](INFO): SBD MOMSN=4555181
2016-11-11T07:52:47.375Z,1478850767.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:47.389Z,1478850767.389 [BPC1](ERROR): Failed to receive battery data
2016-11-11T07:52:47.389Z,1478850767.389 [BPC1] Communications Fault, FailCount= 1
2016-11-11T07:52:47.389Z,1478850767.389 [BPC1](ERROR): Communications Fault
2016-11-11T07:52:47.397Z,1478850767.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:47.404Z,1478850767.404 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:47.404Z,1478850767.404 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 42
2016-11-11T07:52:47.404Z,1478850767.404 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:52:47.482Z,1478850767.482 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:52:47.482Z,1478850767.482 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T07:52:49.344Z,1478850769.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:49.373Z,1478850769.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:49.392Z,1478850769.392 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:52:49.392Z,1478850769.392 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 42
2016-11-11T07:52:49.522Z,1478850769.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:49.558Z,1478850769.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:49.573Z,1478850769.573 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:52:49.573Z,1478850769.573 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:52:49.573Z,1478850769.573 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:52:52.999Z,1478850772.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:53.014Z,1478850773.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:53.034Z,1478850773.034 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:52:53.034Z,1478850773.034 [BPC1] No Fault, FailCount= 1
2016-11-11T07:52:53.121Z,1478850773.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:53.233Z,1478850773.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:53.469Z,1478850773.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:53.519Z,1478850773.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:53.878Z,1478850773.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:53.912Z,1478850773.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:54.279Z,1478850774.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:54.322Z,1478850774.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:52:54.676Z,1478850774.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:52:54.708Z,1478850774.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:02.193Z,1478850782.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:02.218Z,1478850782.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:02.328Z,1478850782.328 [DataOverHttps](INFO): Sending 332 bytes from file Logs/20161111T044527/Express0073.lzma
2016-11-11T07:53:02.370Z,1478850782.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:02.424Z,1478850782.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:02.737Z,1478850782.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:02.757Z,1478850782.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:03.109Z,1478850783.109 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0073.lzma.bak
2016-11-11T07:53:03.109Z,1478850783.109 [DataOverHttps](INFO): SBD MOMSN=4555183
2016-11-11T07:53:03.149Z,1478850783.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:03.169Z,1478850783.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:04.853Z,1478850784.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:04.938Z,1478850784.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:04.955Z,1478850784.955 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T07:53:04.955Z,1478850784.955 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T07:53:04.956Z,1478850784.955 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T07:53:05.016Z,1478850785.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:05.045Z,1478850785.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:10.617Z,1478850790.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:10.672Z,1478850790.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:10.794Z,1478850790.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:10.850Z,1478850790.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:11.174Z,1478850791.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:11.244Z,1478850791.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:11.574Z,1478850791.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:11.653Z,1478850791.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:11.965Z,1478850791.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:12.021Z,1478850792.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:12.368Z,1478850792.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:12.416Z,1478850792.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:12.768Z,1478850792.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:12.787Z,1478850792.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:13.158Z,1478850793.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:13.188Z,1478850793.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:13.559Z,1478850793.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:13.626Z,1478850793.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:13.968Z,1478850793.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:14.035Z,1478850794.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:14.365Z,1478850794.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:14.394Z,1478850794.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:14.760Z,1478850794.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:14.792Z,1478850794.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:15.174Z,1478850795.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:15.203Z,1478850795.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:15.570Z,1478850795.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:15.605Z,1478850795.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:15.968Z,1478850795.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:15.998Z,1478850795.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:16.359Z,1478850796.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:16.389Z,1478850796.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:16.759Z,1478850796.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:16.775Z,1478850796.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:17.011Z,1478850797.011 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T07:53:17.011Z,1478850797.011 [Rowe_600LCM] Communications Fault, FailCount= 5
2016-11-11T07:53:17.011Z,1478850797.011 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T07:53:17.140Z,1478850797.141 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T07:53:17.159Z,1478850797.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:17.178Z,1478850797.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T07:53:17.184Z,1478850797.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:17.221Z,1478850797.221 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T07:53:17.221Z,1478850797.221 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-11-11T07:53:17.415Z,1478850797.415 [Rowe_600LCM](INFO): Powering down
2016-11-11T07:53:17.559Z,1478850797.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:17.593Z,1478850797.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T07:53:17.594Z,1478850797.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:17.958Z,1478850797.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:17.978Z,1478850797.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:53:17.979Z,1478850797.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:18.224Z,1478850798.224 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2016-11-11T07:53:18.224Z,1478850798.224 [Rowe_600LCM] Hardware Fault, FailCount= 5
2016-11-11T07:53:18.224Z,1478850798.224 [Rowe_600LCM](ERROR): Hardware Fault
2016-11-11T07:53:18.366Z,1478850798.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:18.389Z,1478850798.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:53:18.390Z,1478850798.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:18.761Z,1478850798.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:18.775Z,1478850798.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:53:18.777Z,1478850798.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:19.161Z,1478850799.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:19.214Z,1478850799.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:53:19.216Z,1478850799.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:19.565Z,1478850799.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:19.592Z,1478850799.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:53:19.594Z,1478850799.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:19.957Z,1478850799.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:19.984Z,1478850799.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:53:19.986Z,1478850799.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:20.390Z,1478850800.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:20.407Z,1478850800.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:53:20.408Z,1478850800.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:20.765Z,1478850800.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:20.808Z,1478850800.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:53:20.809Z,1478850800.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:21.161Z,1478850801.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:21.180Z,1478850801.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:53:21.182Z,1478850801.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:21.562Z,1478850801.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:21.581Z,1478850801.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:53:21.582Z,1478850801.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:21.963Z,1478850801.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:21.990Z,1478850801.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:53:21.991Z,1478850801.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:22.364Z,1478850802.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:22.431Z,1478850802.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2016-11-11T07:53:22.432Z,1478850802.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:22.740Z,1478850802.740 [NAL9602](INFO): Powering down
2016-11-11T07:53:22.760Z,1478850802.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:22.813Z,1478850802.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:53:22.814Z,1478850802.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:23.157Z,1478850803.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:23.215Z,1478850803.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:53:23.217Z,1478850803.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:23.557Z,1478850803.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:23.601Z,1478850803.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T07:53:23.602Z,1478850803.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:23.961Z,1478850803.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:24.017Z,1478850804.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T07:53:24.018Z,1478850804.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:24.363Z,1478850804.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:24.377Z,1478850804.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T07:53:24.379Z,1478850804.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:24.766Z,1478850804.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:24.780Z,1478850804.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T07:53:24.781Z,1478850804.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:25.162Z,1478850805.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:25.218Z,1478850805.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T07:53:25.219Z,1478850805.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:25.565Z,1478850805.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:25.579Z,1478850805.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T07:53:25.580Z,1478850805.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:25.964Z,1478850805.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:26.021Z,1478850806.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T07:53:26.022Z,1478850806.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:26.365Z,1478850806.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:26.437Z,1478850806.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2016-11-11T07:53:26.438Z,1478850806.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:26.757Z,1478850806.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:26.791Z,1478850806.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T07:53:26.793Z,1478850806.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:27.157Z,1478850807.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:27.192Z,1478850807.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T07:53:27.194Z,1478850807.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:27.564Z,1478850807.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:27.592Z,1478850807.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T07:53:27.593Z,1478850807.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:27.964Z,1478850807.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:27.980Z,1478850807.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T07:53:27.981Z,1478850807.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:28.363Z,1478850808.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:28.379Z,1478850808.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T07:53:28.380Z,1478850808.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:28.765Z,1478850808.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:28.781Z,1478850808.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T07:53:28.782Z,1478850808.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:29.157Z,1478850809.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:29.189Z,1478850809.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T07:53:29.190Z,1478850809.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:29.557Z,1478850809.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:29.590Z,1478850809.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T07:53:29.592Z,1478850809.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:29.957Z,1478850809.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:29.972Z,1478850809.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T07:53:29.973Z,1478850809.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:30.360Z,1478850810.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:30.377Z,1478850810.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T07:53:30.378Z,1478850810.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:30.760Z,1478850810.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:30.775Z,1478850810.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T07:53:30.776Z,1478850810.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:31.164Z,1478850811.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:31.179Z,1478850811.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T07:53:31.181Z,1478850811.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:31.563Z,1478850811.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:31.584Z,1478850811.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T07:53:31.585Z,1478850811.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:31.964Z,1478850811.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:31.979Z,1478850811.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T07:53:31.980Z,1478850811.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:32.364Z,1478850812.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:32.379Z,1478850812.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T07:53:32.380Z,1478850812.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:32.767Z,1478850812.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:32.785Z,1478850812.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T07:53:32.786Z,1478850812.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:33.157Z,1478850813.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:33.190Z,1478850813.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T07:53:33.191Z,1478850813.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:33.561Z,1478850813.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:33.593Z,1478850813.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T07:53:33.594Z,1478850813.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:33.957Z,1478850813.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:33.988Z,1478850813.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T07:53:33.989Z,1478850813.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:34.357Z,1478850814.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:34.388Z,1478850814.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T07:53:34.389Z,1478850814.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:34.761Z,1478850814.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:34.786Z,1478850814.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T07:53:34.788Z,1478850814.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:35.157Z,1478850815.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:35.195Z,1478850815.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T07:53:35.198Z,1478850815.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:35.557Z,1478850815.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:35.592Z,1478850815.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T07:53:35.594Z,1478850815.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:35.961Z,1478850815.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:35.993Z,1478850815.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T07:53:35.994Z,1478850815.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:36.365Z,1478850816.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:36.392Z,1478850816.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T07:53:36.394Z,1478850816.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:36.757Z,1478850816.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:36.792Z,1478850816.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:37.157Z,1478850817.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:37.188Z,1478850817.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:37.557Z,1478850817.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:37.617Z,1478850817.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:37.960Z,1478850817.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:37.981Z,1478850817.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:38.364Z,1478850818.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:38.417Z,1478850818.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:38.763Z,1478850818.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:38.781Z,1478850818.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:39.163Z,1478850819.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:39.262Z,1478850819.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:39.564Z,1478850819.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:39.579Z,1478850819.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:39.964Z,1478850819.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:40.006Z,1478850820.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:40.357Z,1478850820.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:40.406Z,1478850820.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:40.757Z,1478850820.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:40.789Z,1478850820.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:41.157Z,1478850821.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:41.189Z,1478850821.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:41.557Z,1478850821.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:41.590Z,1478850821.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:41.957Z,1478850821.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:41.989Z,1478850821.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:42.361Z,1478850822.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:42.393Z,1478850822.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:42.757Z,1478850822.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:42.791Z,1478850822.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:43.164Z,1478850823.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:43.185Z,1478850823.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:43.563Z,1478850823.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:43.585Z,1478850823.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:43.957Z,1478850823.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:43.990Z,1478850823.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:44.360Z,1478850824.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:44.375Z,1478850824.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:44.761Z,1478850824.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:44.788Z,1478850824.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:45.164Z,1478850825.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:45.191Z,1478850825.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:45.564Z,1478850825.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:45.580Z,1478850825.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:45.972Z,1478850825.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:45.987Z,1478850825.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:46.357Z,1478850826.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:46.391Z,1478850826.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:46.757Z,1478850826.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:46.838Z,1478850826.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:47.161Z,1478850827.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:47.193Z,1478850827.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:47.557Z,1478850827.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:47.593Z,1478850827.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:47.965Z,1478850827.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:47.999Z,1478850827.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:48.365Z,1478850828.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:48.399Z,1478850828.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:48.757Z,1478850828.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:48.803Z,1478850828.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:49.157Z,1478850829.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:49.203Z,1478850829.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:49.558Z,1478850829.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:49.602Z,1478850829.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:49.965Z,1478850829.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:49.998Z,1478850829.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:50.360Z,1478850830.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:50.376Z,1478850830.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:50.763Z,1478850830.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:50.779Z,1478850830.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:51.164Z,1478850831.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:51.227Z,1478850831.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:51.557Z,1478850831.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:51.589Z,1478850831.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:51.961Z,1478850831.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:51.993Z,1478850831.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:52.357Z,1478850832.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:52.392Z,1478850832.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:52.757Z,1478850832.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:52.809Z,1478850832.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:53.165Z,1478850833.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:53.199Z,1478850833.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:53.557Z,1478850833.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:53.599Z,1478850833.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:53.957Z,1478850833.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:54.013Z,1478850834.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:54.361Z,1478850834.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:54.376Z,1478850834.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:54.754Z,1478850834.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:54.794Z,1478850834.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:55.164Z,1478850835.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:55.216Z,1478850835.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:55.565Z,1478850835.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:55.643Z,1478850835.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:55.972Z,1478850835.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:55.987Z,1478850835.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:56.357Z,1478850836.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:56.389Z,1478850836.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:56.764Z,1478850836.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:56.779Z,1478850836.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:57.168Z,1478850837.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:57.189Z,1478850837.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:57.557Z,1478850837.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:57.582Z,1478850837.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:57.968Z,1478850837.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:57.992Z,1478850837.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:58.381Z,1478850838.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:58.437Z,1478850838.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:58.757Z,1478850838.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:58.780Z,1478850838.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:59.161Z,1478850839.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:59.193Z,1478850839.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:59.557Z,1478850839.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:59.585Z,1478850839.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:53:59.964Z,1478850839.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:53:59.979Z,1478850839.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:00.372Z,1478850840.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:00.393Z,1478850840.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:00.757Z,1478850840.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:00.781Z,1478850840.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:01.157Z,1478850841.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:01.193Z,1478850841.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:01.561Z,1478850841.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:01.593Z,1478850841.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:01.958Z,1478850841.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:01.994Z,1478850841.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:02.357Z,1478850842.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:02.372Z,1478850842.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:02.761Z,1478850842.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:02.777Z,1478850842.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:03.165Z,1478850843.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:03.180Z,1478850843.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:03.562Z,1478850843.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:03.589Z,1478850843.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:03.957Z,1478850843.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:03.993Z,1478850843.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:04.357Z,1478850844.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:04.393Z,1478850844.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:04.762Z,1478850844.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:04.794Z,1478850844.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:05.158Z,1478850845.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:05.173Z,1478850845.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:05.562Z,1478850845.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:05.617Z,1478850845.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:08.814Z,1478850848.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:08.881Z,1478850848.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:08.978Z,1478850848.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:09.006Z,1478850849.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:09.359Z,1478850849.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:09.410Z,1478850849.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:09.753Z,1478850849.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:09.785Z,1478850849.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:10.153Z,1478850850.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:10.197Z,1478850850.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:10.553Z,1478850850.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:10.594Z,1478850850.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:10.958Z,1478850850.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:10.989Z,1478850850.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:11.353Z,1478850851.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:11.389Z,1478850851.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:11.753Z,1478850851.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:11.788Z,1478850851.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:12.153Z,1478850852.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:12.193Z,1478850852.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:12.552Z,1478850852.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:12.593Z,1478850852.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:12.954Z,1478850852.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:12.981Z,1478850852.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:13.360Z,1478850853.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:13.375Z,1478850853.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:13.761Z,1478850853.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:13.781Z,1478850853.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:14.161Z,1478850854.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:14.181Z,1478850854.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:14.560Z,1478850854.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:14.576Z,1478850854.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:14.968Z,1478850854.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:14.983Z,1478850854.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:15.353Z,1478850855.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:15.386Z,1478850855.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:15.753Z,1478850855.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:15.778Z,1478850855.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:16.168Z,1478850856.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:16.183Z,1478850856.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:16.553Z,1478850856.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:16.577Z,1478850856.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:16.953Z,1478850856.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:16.989Z,1478850856.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:17.361Z,1478850857.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:17.387Z,1478850857.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:17.753Z,1478850857.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:17.784Z,1478850857.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:18.153Z,1478850858.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:18.184Z,1478850858.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:18.557Z,1478850858.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:18.589Z,1478850858.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:18.957Z,1478850858.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:18.993Z,1478850858.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:19.357Z,1478850859.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:19.372Z,1478850859.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:19.756Z,1478850859.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:19.785Z,1478850859.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:20.160Z,1478850860.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:20.175Z,1478850860.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:20.564Z,1478850860.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:20.580Z,1478850860.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:20.956Z,1478850860.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:20.988Z,1478850860.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:21.364Z,1478850861.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:21.418Z,1478850861.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:21.753Z,1478850861.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:21.789Z,1478850861.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:22.153Z,1478850862.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:22.189Z,1478850862.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:22.553Z,1478850862.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:22.594Z,1478850862.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:22.953Z,1478850862.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:22.968Z,1478850862.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:23.361Z,1478850863.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:23.413Z,1478850863.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:23.757Z,1478850863.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:23.777Z,1478850863.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:24.163Z,1478850864.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:24.213Z,1478850864.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:24.558Z,1478850864.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:24.613Z,1478850864.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:24.965Z,1478850864.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:24.985Z,1478850864.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:25.359Z,1478850865.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:25.386Z,1478850865.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:25.753Z,1478850865.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:25.789Z,1478850865.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:26.153Z,1478850866.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:26.185Z,1478850866.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:26.553Z,1478850866.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:26.585Z,1478850866.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:26.953Z,1478850866.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:26.985Z,1478850866.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:27.353Z,1478850867.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:27.390Z,1478850867.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:27.753Z,1478850867.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:27.776Z,1478850867.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:28.153Z,1478850868.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:28.193Z,1478850868.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:28.553Z,1478850868.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:28.601Z,1478850868.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:28.951Z,1478850868.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:28.966Z,1478850868.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:29.353Z,1478850869.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:29.373Z,1478850869.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:29.756Z,1478850869.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:29.777Z,1478850869.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:30.160Z,1478850870.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:30.176Z,1478850870.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:30.560Z,1478850870.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:30.581Z,1478850870.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:30.964Z,1478850870.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:30.993Z,1478850870.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:31.353Z,1478850871.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:31.388Z,1478850871.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:31.753Z,1478850871.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:31.779Z,1478850871.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:32.153Z,1478850872.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:32.185Z,1478850872.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:32.553Z,1478850872.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:32.585Z,1478850872.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:32.964Z,1478850872.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:32.985Z,1478850872.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:33.368Z,1478850873.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:33.389Z,1478850873.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:33.753Z,1478850873.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:33.778Z,1478850873.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:34.153Z,1478850874.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:34.185Z,1478850874.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:34.553Z,1478850874.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:34.589Z,1478850874.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:34.953Z,1478850874.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:34.989Z,1478850874.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:35.353Z,1478850875.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:35.433Z,1478850875.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:35.753Z,1478850875.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:35.796Z,1478850875.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:36.153Z,1478850876.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:36.205Z,1478850876.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:36.553Z,1478850876.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:36.596Z,1478850876.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:36.956Z,1478850876.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:37.006Z,1478850877.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:37.353Z,1478850877.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:37.405Z,1478850877.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:37.753Z,1478850877.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:37.801Z,1478850877.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:38.153Z,1478850878.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:38.173Z,1478850878.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:38.553Z,1478850878.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:38.573Z,1478850878.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:38.959Z,1478850878.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:38.981Z,1478850878.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:39.360Z,1478850879.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:39.381Z,1478850879.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:39.759Z,1478850879.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:39.778Z,1478850879.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:40.160Z,1478850880.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:40.181Z,1478850880.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:40.561Z,1478850880.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:40.577Z,1478850880.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:40.960Z,1478850880.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:40.976Z,1478850880.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:41.353Z,1478850881.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:41.386Z,1478850881.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:41.753Z,1478850881.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:41.786Z,1478850881.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:42.153Z,1478850882.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:42.185Z,1478850882.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:42.553Z,1478850882.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:42.593Z,1478850882.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:42.957Z,1478850882.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:42.992Z,1478850882.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:43.353Z,1478850883.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:43.368Z,1478850883.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:43.757Z,1478850883.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:43.771Z,1478850883.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:44.156Z,1478850884.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:44.177Z,1478850884.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:44.553Z,1478850884.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:44.577Z,1478850884.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:44.960Z,1478850884.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:44.975Z,1478850884.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:45.361Z,1478850885.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:45.376Z,1478850885.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:45.763Z,1478850885.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:45.778Z,1478850885.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:46.156Z,1478850886.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:46.179Z,1478850886.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:46.564Z,1478850886.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:46.579Z,1478850886.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:46.965Z,1478850886.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:46.980Z,1478850886.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:47.361Z,1478850887.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:47.381Z,1478850887.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:47.768Z,1478850887.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:47.783Z,1478850887.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:48.153Z,1478850888.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:48.241Z,1478850888.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:48.553Z,1478850888.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:48.588Z,1478850888.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:48.953Z,1478850888.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:49.005Z,1478850889.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:49.353Z,1478850889.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:49.384Z,1478850889.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:49.753Z,1478850889.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:49.798Z,1478850889.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:50.157Z,1478850890.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:50.209Z,1478850890.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:50.553Z,1478850890.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:50.568Z,1478850890.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:50.958Z,1478850890.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:50.972Z,1478850890.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:51.361Z,1478850891.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:51.376Z,1478850891.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:51.760Z,1478850891.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:51.775Z,1478850891.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:52.159Z,1478850892.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:52.181Z,1478850892.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:52.559Z,1478850892.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:52.574Z,1478850892.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:52.960Z,1478850892.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:52.975Z,1478850892.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:53.360Z,1478850893.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:53.374Z,1478850893.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:53.764Z,1478850893.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:53.780Z,1478850893.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:54.161Z,1478850894.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:54.176Z,1478850894.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:54.561Z,1478850894.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:54.581Z,1478850894.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:54.952Z,1478850894.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:54.986Z,1478850894.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:55.361Z,1478850895.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:55.376Z,1478850895.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:55.761Z,1478850895.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:55.781Z,1478850895.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:56.156Z,1478850896.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:56.181Z,1478850896.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:56.561Z,1478850896.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:56.576Z,1478850896.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:56.961Z,1478850896.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:56.982Z,1478850896.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:57.353Z,1478850897.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:57.379Z,1478850897.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:57.753Z,1478850897.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:57.785Z,1478850897.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:58.164Z,1478850898.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:58.179Z,1478850898.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:58.553Z,1478850898.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:58.585Z,1478850898.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:58.964Z,1478850898.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:58.984Z,1478850898.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:59.357Z,1478850899.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:59.382Z,1478850899.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:54:59.761Z,1478850899.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:54:59.797Z,1478850899.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:00.153Z,1478850900.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:00.168Z,1478850900.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:00.574Z,1478850900.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:00.605Z,1478850900.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:00.958Z,1478850900.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:01.029Z,1478850901.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:01.360Z,1478850901.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:01.376Z,1478850901.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:01.761Z,1478850901.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:01.818Z,1478850901.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:02.165Z,1478850902.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:02.180Z,1478850902.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:02.560Z,1478850902.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:02.619Z,1478850902.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:02.966Z,1478850902.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:03.018Z,1478850903.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:03.354Z,1478850903.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:03.385Z,1478850903.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:03.754Z,1478850903.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:03.789Z,1478850903.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:04.154Z,1478850904.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:04.189Z,1478850904.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:04.554Z,1478850904.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:04.580Z,1478850904.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:04.966Z,1478850904.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:04.981Z,1478850904.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:05.353Z,1478850905.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:05.380Z,1478850905.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:05.753Z,1478850905.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:05.778Z,1478850905.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:09.001Z,1478850909.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:09.017Z,1478850909.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:09.113Z,1478850909.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:09.145Z,1478850909.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:09.509Z,1478850909.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:09.541Z,1478850909.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:09.909Z,1478850909.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:09.945Z,1478850909.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:10.315Z,1478850910.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:10.330Z,1478850910.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:10.713Z,1478850910.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:10.752Z,1478850910.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:11.105Z,1478850911.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:11.128Z,1478850911.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:11.513Z,1478850911.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:11.531Z,1478850911.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:11.915Z,1478850911.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:11.930Z,1478850911.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:12.308Z,1478850912.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:12.343Z,1478850912.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:12.708Z,1478850912.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:12.742Z,1478850912.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:13.119Z,1478850913.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:13.135Z,1478850913.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:13.507Z,1478850913.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:13.535Z,1478850913.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:13.905Z,1478850913.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:13.949Z,1478850913.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:14.316Z,1478850914.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:14.342Z,1478850914.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:14.705Z,1478850914.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:14.734Z,1478850914.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:15.107Z,1478850915.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:15.113Z,1478850915.114 [PNI_TCM](ERROR): CRC does not match. Expected:0x18692 got:0x44396
2016-11-11T07:55:15.145Z,1478850915.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:15.505Z,1478850915.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:15.540Z,1478850915.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:15.905Z,1478850915.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:15.942Z,1478850915.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:16.306Z,1478850916.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:16.341Z,1478850916.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:16.712Z,1478850916.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:16.745Z,1478850916.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:17.113Z,1478850917.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:17.154Z,1478850917.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:17.515Z,1478850917.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:17.532Z,1478850917.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:17.914Z,1478850917.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:17.961Z,1478850917.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:18.314Z,1478850918.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:18.327Z,1478850918.327 [BPC1](ERROR): Failed to receive battery data
2016-11-11T07:55:18.327Z,1478850918.327 [BPC1] Communications Fault, FailCount= 1
2016-11-11T07:55:18.327Z,1478850918.327 [BPC1](ERROR): Communications Fault
2016-11-11T07:55:18.336Z,1478850918.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:18.376Z,1478850918.376 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T07:55:18.712Z,1478850918.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:18.738Z,1478850918.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:19.114Z,1478850919.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:19.136Z,1478850919.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:19.507Z,1478850919.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:19.535Z,1478850919.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:19.555Z,1478850919.555 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:55:19.555Z,1478850919.555 [BPC1] No Fault, FailCount= 1
2016-11-11T07:55:19.907Z,1478850919.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:19.986Z,1478850919.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:20.305Z,1478850920.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:20.361Z,1478850920.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:20.709Z,1478850920.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:20.728Z,1478850920.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:21.110Z,1478850921.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:21.125Z,1478850921.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:21.514Z,1478850921.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:21.529Z,1478850921.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:21.912Z,1478850921.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:21.957Z,1478850921.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:22.313Z,1478850922.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:22.321Z,1478850922.321 [PNI_TCM](ERROR): CRC does not match. Expected:0x21115 got:0x30070
2016-11-11T07:55:22.363Z,1478850922.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:22.714Z,1478850922.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:22.729Z,1478850922.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:23.114Z,1478850923.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:23.129Z,1478850923.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:23.512Z,1478850923.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:23.549Z,1478850923.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:23.915Z,1478850923.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:23.922Z,1478850923.922 [PNI_TCM](ERROR): CRC does not match. Expected:0x11912 got:0x16913
2016-11-11T07:55:23.944Z,1478850923.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:24.315Z,1478850924.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:24.330Z,1478850924.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:24.706Z,1478850924.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:24.740Z,1478850924.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:25.105Z,1478850925.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:25.136Z,1478850925.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:25.507Z,1478850925.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:25.522Z,1478850925.523 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T07:55:25.549Z,1478850925.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:25.907Z,1478850925.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:25.932Z,1478850925.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:26.306Z,1478850926.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:26.341Z,1478850926.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:26.705Z,1478850926.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:26.734Z,1478850926.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:27.107Z,1478850927.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:27.114Z,1478850927.114 [PNI_TCM](ERROR): CRC does not match. Expected:0x53129 got:0x6978
2016-11-11T07:55:27.141Z,1478850927.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:27.508Z,1478850927.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:27.538Z,1478850927.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:27.905Z,1478850927.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:27.941Z,1478850927.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:28.305Z,1478850928.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:28.340Z,1478850928.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:28.707Z,1478850928.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:28.714Z,1478850928.714 [PNI_TCM](ERROR): CRC does not match. Expected:0x44899 got:0x1857
2016-11-11T07:55:28.752Z,1478850928.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:29.107Z,1478850929.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:29.134Z,1478850929.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:29.505Z,1478850929.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:29.545Z,1478850929.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:29.906Z,1478850929.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:29.923Z,1478850929.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:30.307Z,1478850930.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:30.322Z,1478850930.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:30.713Z,1478850930.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:30.727Z,1478850930.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:31.112Z,1478850931.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:31.169Z,1478850931.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:31.514Z,1478850931.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:31.534Z,1478850931.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:31.914Z,1478850931.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:31.933Z,1478850931.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:32.306Z,1478850932.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:32.365Z,1478850932.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:32.705Z,1478850932.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:32.745Z,1478850932.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:33.112Z,1478850933.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:33.141Z,1478850933.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:33.508Z,1478850933.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:33.550Z,1478850933.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:33.905Z,1478850933.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:33.941Z,1478850933.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:34.305Z,1478850934.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:34.353Z,1478850934.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:34.707Z,1478850934.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:34.753Z,1478850934.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:35.107Z,1478850935.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:35.138Z,1478850935.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:35.505Z,1478850935.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:35.545Z,1478850935.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:35.905Z,1478850935.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:35.925Z,1478850935.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:36.307Z,1478850936.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:36.322Z,1478850936.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:36.706Z,1478850936.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:36.737Z,1478850936.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:37.112Z,1478850937.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:37.126Z,1478850937.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:37.505Z,1478850937.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:37.537Z,1478850937.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:37.907Z,1478850937.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:37.940Z,1478850937.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:38.311Z,1478850938.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:38.333Z,1478850938.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:38.709Z,1478850938.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:38.724Z,1478850938.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:39.112Z,1478850939.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:39.127Z,1478850939.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:39.515Z,1478850939.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:39.529Z,1478850939.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:39.916Z,1478850939.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:39.931Z,1478850939.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:40.313Z,1478850940.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:40.333Z,1478850940.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:40.705Z,1478850940.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:40.730Z,1478850940.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:41.115Z,1478850941.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:41.136Z,1478850941.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:41.505Z,1478850941.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:41.539Z,1478850941.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:41.905Z,1478850941.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:41.930Z,1478850941.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:42.305Z,1478850942.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:42.337Z,1478850942.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:42.710Z,1478850942.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:42.735Z,1478850942.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:43.105Z,1478850943.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:43.145Z,1478850943.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:43.505Z,1478850943.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:43.541Z,1478850943.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:43.905Z,1478850943.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:43.941Z,1478850943.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:44.306Z,1478850944.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:44.340Z,1478850944.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:44.709Z,1478850944.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:44.741Z,1478850944.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:45.105Z,1478850945.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:45.141Z,1478850945.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:45.505Z,1478850945.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:45.565Z,1478850945.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:45.909Z,1478850945.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:45.929Z,1478850945.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:46.312Z,1478850946.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:46.327Z,1478850946.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:46.708Z,1478850946.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:46.729Z,1478850946.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:47.117Z,1478850947.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:47.169Z,1478850947.169 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:47.169Z,1478850947.169 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2016-11-11T07:55:47.169Z,1478850947.169 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:55:47.184Z,1478850947.184 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:47.184Z,1478850947.184 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 43
2016-11-11T07:55:47.184Z,1478850947.184 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:55:47.216Z,1478850947.216 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:55:47.216Z,1478850947.216 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:55:47.505Z,1478850947.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:47.567Z,1478850947.567 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:55:47.567Z,1478850947.567 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2016-11-11T07:55:47.568Z,1478850947.568 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:55:47.568Z,1478850947.568 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 43
2016-11-11T07:55:47.905Z,1478850947.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:47.937Z,1478850947.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:55:47.938Z,1478850947.938 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:55:47.938Z,1478850947.938 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:55:47.942Z,1478850947.943 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:55:47.943Z,1478850947.943 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:55:47.943Z,1478850947.943 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:55:48.305Z,1478850948.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:48.361Z,1478850948.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:55:48.362Z,1478850948.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:48.705Z,1478850948.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:48.737Z,1478850948.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:55:48.738Z,1478850948.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:49.105Z,1478850949.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:49.152Z,1478850949.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:55:49.153Z,1478850949.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:49.505Z,1478850949.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:49.557Z,1478850949.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:55:49.558Z,1478850949.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:49.581Z,1478850949.581 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:49.581Z,1478850949.581 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 43
2016-11-11T07:55:49.581Z,1478850949.581 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:55:49.623Z,1478850949.623 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:55:49.905Z,1478850949.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:49.940Z,1478850949.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:55:49.941Z,1478850949.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:49.960Z,1478850949.960 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:55:49.960Z,1478850949.960 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 43
2016-11-11T07:55:50.305Z,1478850950.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:50.343Z,1478850950.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:55:50.344Z,1478850950.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:50.350Z,1478850950.350 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:55:50.350Z,1478850950.351 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:55:50.351Z,1478850950.351 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:55:50.709Z,1478850950.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:50.744Z,1478850950.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:55:50.745Z,1478850950.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:50.778Z,1478850950.778 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T07:55:51.105Z,1478850951.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:51.147Z,1478850951.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:55:51.148Z,1478850951.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:51.505Z,1478850951.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:51.544Z,1478850951.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:55:51.545Z,1478850951.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:51.913Z,1478850951.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:51.928Z,1478850951.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:55:51.928Z,1478850951.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:52.311Z,1478850952.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:52.332Z,1478850952.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:55:52.333Z,1478850952.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:52.711Z,1478850952.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:52.725Z,1478850952.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:55:52.726Z,1478850952.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:53.117Z,1478850953.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:53.131Z,1478850953.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:55:53.132Z,1478850953.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:53.505Z,1478850953.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:53.538Z,1478850953.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:55:53.539Z,1478850953.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:53.905Z,1478850953.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:53.938Z,1478850953.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T07:55:53.939Z,1478850953.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:54.316Z,1478850954.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:54.359Z,1478850954.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T07:55:54.360Z,1478850954.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:54.709Z,1478850954.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:54.728Z,1478850954.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T07:55:54.729Z,1478850954.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:55.112Z,1478850955.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:55.126Z,1478850955.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T07:55:55.127Z,1478850955.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:55.513Z,1478850955.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:55.533Z,1478850955.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T07:55:55.534Z,1478850955.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:55.912Z,1478850955.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:55.927Z,1478850955.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T07:55:55.928Z,1478850955.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:56.313Z,1478850956.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:56.332Z,1478850956.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T07:55:56.333Z,1478850956.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:56.708Z,1478850956.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:56.741Z,1478850956.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T07:55:56.742Z,1478850956.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:57.117Z,1478850957.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:57.132Z,1478850957.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T07:55:57.133Z,1478850957.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:57.506Z,1478850957.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:57.536Z,1478850957.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T07:55:57.537Z,1478850957.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:57.905Z,1478850957.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:57.943Z,1478850957.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T07:55:57.954Z,1478850957.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:58.305Z,1478850958.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:58.340Z,1478850958.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T07:55:58.341Z,1478850958.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:58.705Z,1478850958.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:58.721Z,1478850958.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T07:55:58.722Z,1478850958.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:59.110Z,1478850959.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:59.129Z,1478850959.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T07:55:59.130Z,1478850959.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:59.510Z,1478850959.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:59.529Z,1478850959.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T07:55:59.530Z,1478850959.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:55:59.912Z,1478850959.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:55:59.965Z,1478850959.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T07:55:59.966Z,1478850959.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:00.312Z,1478850960.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:00.327Z,1478850960.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T07:56:00.328Z,1478850960.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:00.712Z,1478850960.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:00.733Z,1478850960.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T07:56:00.734Z,1478850960.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:01.112Z,1478850961.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:01.126Z,1478850961.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T07:56:01.127Z,1478850961.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:01.513Z,1478850961.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:01.549Z,1478850961.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T07:56:01.550Z,1478850961.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:01.905Z,1478850961.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:01.938Z,1478850961.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T07:56:01.939Z,1478850961.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:02.305Z,1478850962.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:02.338Z,1478850962.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T07:56:02.339Z,1478850962.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:02.705Z,1478850962.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:02.770Z,1478850962.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T07:56:02.771Z,1478850962.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:03.105Z,1478850963.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:03.129Z,1478850963.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T07:56:03.130Z,1478850963.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:03.505Z,1478850963.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:03.553Z,1478850963.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T07:56:03.554Z,1478850963.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:03.905Z,1478850963.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:03.953Z,1478850963.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T07:56:03.954Z,1478850963.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:04.305Z,1478850964.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:04.340Z,1478850964.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T07:56:04.341Z,1478850964.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:04.705Z,1478850964.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:04.740Z,1478850964.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T07:56:04.741Z,1478850964.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:05.105Z,1478850965.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:05.120Z,1478850965.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T07:56:05.121Z,1478850965.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:05.505Z,1478850965.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:05.524Z,1478850965.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T07:56:05.525Z,1478850965.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:05.910Z,1478850965.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:05.928Z,1478850965.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T07:56:05.929Z,1478850965.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:09.257Z,1478850969.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:09.273Z,1478850969.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:09.369Z,1478850969.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:09.397Z,1478850969.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:09.725Z,1478850969.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:09.740Z,1478850969.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:10.129Z,1478850970.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:10.144Z,1478850970.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:10.527Z,1478850970.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:10.542Z,1478850970.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:10.928Z,1478850970.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:10.944Z,1478850970.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:11.335Z,1478850971.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:11.351Z,1478850971.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:11.727Z,1478850971.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:11.750Z,1478850971.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:12.133Z,1478850972.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:12.148Z,1478850972.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:12.525Z,1478850972.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:12.560Z,1478850972.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:12.921Z,1478850972.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:12.957Z,1478850972.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:13.334Z,1478850973.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:13.357Z,1478850973.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:13.725Z,1478850973.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:13.757Z,1478850973.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:14.121Z,1478850974.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:14.149Z,1478850974.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:14.529Z,1478850974.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:14.561Z,1478850974.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:14.929Z,1478850974.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:14.983Z,1478850974.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:15.329Z,1478850975.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:15.345Z,1478850975.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:15.729Z,1478850975.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:15.744Z,1478850975.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:16.128Z,1478850976.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:16.177Z,1478850976.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:16.529Z,1478850976.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:16.544Z,1478850976.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:16.933Z,1478850976.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:16.986Z,1478850976.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:17.325Z,1478850977.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:17.357Z,1478850977.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:17.725Z,1478850977.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:17.781Z,1478850977.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:18.121Z,1478850978.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:18.162Z,1478850978.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:18.525Z,1478850978.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:18.561Z,1478850978.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:18.921Z,1478850978.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:18.937Z,1478850978.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:19.325Z,1478850979.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:19.371Z,1478850979.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:19.721Z,1478850979.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:19.741Z,1478850979.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:20.124Z,1478850980.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:20.140Z,1478850980.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:20.521Z,1478850980.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:20.558Z,1478850980.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:20.928Z,1478850980.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:20.944Z,1478850980.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:21.328Z,1478850981.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:21.357Z,1478850981.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:21.721Z,1478850981.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:21.753Z,1478850981.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:22.121Z,1478850982.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:22.154Z,1478850982.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:22.521Z,1478850982.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:22.553Z,1478850982.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:22.921Z,1478850982.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:22.953Z,1478850982.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:23.321Z,1478850983.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:23.335Z,1478850983.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:23.721Z,1478850983.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:23.744Z,1478850983.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:24.125Z,1478850984.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:24.145Z,1478850984.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:24.524Z,1478850984.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:24.545Z,1478850984.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:24.926Z,1478850984.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:24.941Z,1478850984.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:25.327Z,1478850985.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:25.349Z,1478850985.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:25.731Z,1478850985.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:25.753Z,1478850985.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:26.128Z,1478850986.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:26.144Z,1478850986.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:26.532Z,1478850986.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:26.553Z,1478850986.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:26.928Z,1478850986.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:26.951Z,1478850986.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:27.325Z,1478850987.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:27.350Z,1478850987.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:27.736Z,1478850987.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:27.757Z,1478850987.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:28.125Z,1478850988.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:28.150Z,1478850988.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:28.521Z,1478850988.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:28.577Z,1478850988.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:28.921Z,1478850988.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:28.941Z,1478850988.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:29.321Z,1478850989.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:29.341Z,1478850989.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:29.726Z,1478850989.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:29.741Z,1478850989.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:30.128Z,1478850990.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:30.193Z,1478850990.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:30.527Z,1478850990.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:30.542Z,1478850990.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:30.928Z,1478850990.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:30.944Z,1478850990.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:31.328Z,1478850991.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:31.366Z,1478850991.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:31.728Z,1478850991.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:31.749Z,1478850991.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:32.133Z,1478850992.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:32.190Z,1478850992.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:32.532Z,1478850992.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:32.558Z,1478850992.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:32.921Z,1478850992.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:32.966Z,1478850992.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:33.325Z,1478850993.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:33.357Z,1478850993.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:33.721Z,1478850993.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:33.755Z,1478850993.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:34.121Z,1478850994.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:34.161Z,1478850994.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:34.521Z,1478850994.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:34.557Z,1478850994.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:34.921Z,1478850994.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:34.957Z,1478850994.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:35.321Z,1478850995.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:35.356Z,1478850995.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:35.721Z,1478850995.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:35.748Z,1478850995.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:36.121Z,1478850996.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:36.161Z,1478850996.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:36.518Z,1478850996.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:36.532Z,1478850996.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:36.933Z,1478850996.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:36.964Z,1478850996.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:37.321Z,1478850997.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:37.349Z,1478850997.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:37.730Z,1478850997.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:37.744Z,1478850997.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:38.131Z,1478850998.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:38.146Z,1478850998.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:38.528Z,1478850998.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:38.549Z,1478850998.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:38.929Z,1478850998.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:38.985Z,1478850998.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:39.321Z,1478850999.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:39.357Z,1478850999.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:39.729Z,1478850999.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:39.761Z,1478850999.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:40.121Z,1478851000.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:40.157Z,1478851000.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:40.525Z,1478851000.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:40.557Z,1478851000.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:40.921Z,1478851000.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:40.958Z,1478851000.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:41.329Z,1478851001.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:41.357Z,1478851001.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:41.721Z,1478851001.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:41.757Z,1478851001.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:42.125Z,1478851002.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:42.161Z,1478851002.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:42.521Z,1478851002.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:42.557Z,1478851002.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:42.921Z,1478851002.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:42.957Z,1478851002.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:43.325Z,1478851003.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:43.356Z,1478851003.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:43.721Z,1478851003.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:43.782Z,1478851003.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:44.120Z,1478851004.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:44.141Z,1478851004.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:44.526Z,1478851004.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:44.581Z,1478851004.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:44.928Z,1478851004.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:44.943Z,1478851004.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:45.331Z,1478851005.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:45.347Z,1478851005.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:45.728Z,1478851005.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:45.766Z,1478851005.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:46.132Z,1478851006.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:46.153Z,1478851006.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:46.521Z,1478851006.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:46.588Z,1478851006.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:46.921Z,1478851006.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:46.966Z,1478851006.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:47.321Z,1478851007.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:47.354Z,1478851007.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:47.721Z,1478851007.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:47.754Z,1478851007.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:48.121Z,1478851008.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:48.154Z,1478851008.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:48.525Z,1478851008.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:48.550Z,1478851008.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:48.925Z,1478851008.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:48.957Z,1478851008.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:49.321Z,1478851009.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:49.349Z,1478851009.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:49.721Z,1478851009.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:49.744Z,1478851009.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:50.121Z,1478851010.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:50.141Z,1478851010.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:50.525Z,1478851010.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:50.540Z,1478851010.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:50.928Z,1478851010.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:50.944Z,1478851010.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:51.329Z,1478851011.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:51.349Z,1478851011.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:51.731Z,1478851011.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:51.753Z,1478851011.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:52.126Z,1478851012.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:52.141Z,1478851012.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:52.532Z,1478851012.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:52.549Z,1478851012.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:52.933Z,1478851012.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:52.947Z,1478851012.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:53.329Z,1478851013.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:53.357Z,1478851013.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:53.721Z,1478851013.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:53.747Z,1478851013.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:54.126Z,1478851014.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:54.155Z,1478851014.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:54.522Z,1478851014.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:54.557Z,1478851014.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:54.926Z,1478851014.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:54.952Z,1478851014.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:55.321Z,1478851015.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:55.355Z,1478851015.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:55.721Z,1478851015.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:55.752Z,1478851015.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:56.125Z,1478851016.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:56.161Z,1478851016.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:56.521Z,1478851016.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:56.554Z,1478851016.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:56.925Z,1478851016.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:56.966Z,1478851016.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:57.325Z,1478851017.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:57.359Z,1478851017.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:57.726Z,1478851017.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:57.741Z,1478851017.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:58.133Z,1478851018.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:58.149Z,1478851018.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:58.525Z,1478851018.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:58.540Z,1478851018.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:58.928Z,1478851018.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:58.996Z,1478851018.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:59.328Z,1478851019.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:59.349Z,1478851019.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:56:59.728Z,1478851019.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:56:59.743Z,1478851019.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:00.128Z,1478851020.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:00.153Z,1478851020.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:00.528Z,1478851020.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:00.547Z,1478851020.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:00.921Z,1478851020.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:00.953Z,1478851020.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:01.321Z,1478851021.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:01.349Z,1478851021.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:01.725Z,1478851021.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:01.761Z,1478851021.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:02.121Z,1478851022.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:02.139Z,1478851022.139 [BPC1](ERROR): Failed to receive battery data
2016-11-11T07:57:02.143Z,1478851022.143 [BPC1] Communications Fault, FailCount= 1
2016-11-11T07:57:02.143Z,1478851022.143 [BPC1](ERROR): Communications Fault
2016-11-11T07:57:02.160Z,1478851022.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:02.190Z,1478851022.190 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T07:57:02.521Z,1478851022.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:02.556Z,1478851022.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:02.921Z,1478851022.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:02.961Z,1478851022.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:03.321Z,1478851023.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:03.361Z,1478851023.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:03.398Z,1478851023.398 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T07:57:03.398Z,1478851023.398 [BPC1] No Fault, FailCount= 1
2016-11-11T07:57:03.721Z,1478851023.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:03.802Z,1478851023.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:04.125Z,1478851024.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:04.172Z,1478851024.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:04.521Z,1478851024.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:04.536Z,1478851024.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:04.921Z,1478851024.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:04.970Z,1478851024.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:05.321Z,1478851025.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:05.368Z,1478851025.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:05.725Z,1478851025.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:05.740Z,1478851025.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:06.130Z,1478851026.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:06.170Z,1478851026.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:09.529Z,1478851029.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:09.549Z,1478851029.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:09.657Z,1478851029.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:09.697Z,1478851029.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:10.049Z,1478851030.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:10.089Z,1478851030.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:10.449Z,1478851030.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:10.464Z,1478851030.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:10.853Z,1478851030.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:10.889Z,1478851030.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:11.249Z,1478851031.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:11.269Z,1478851031.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:11.655Z,1478851031.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:11.677Z,1478851031.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:12.051Z,1478851032.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:12.083Z,1478851032.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:12.457Z,1478851032.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:12.477Z,1478851032.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:12.856Z,1478851032.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:12.892Z,1478851032.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:13.249Z,1478851033.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:13.275Z,1478851033.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:13.649Z,1478851033.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:13.674Z,1478851033.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:14.049Z,1478851034.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:14.085Z,1478851034.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:14.454Z,1478851034.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:14.491Z,1478851034.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:14.849Z,1478851034.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:14.869Z,1478851034.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:15.252Z,1478851035.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:15.290Z,1478851035.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:15.657Z,1478851035.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:15.677Z,1478851035.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:16.057Z,1478851036.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:16.072Z,1478851036.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:16.455Z,1478851036.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:16.534Z,1478851036.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:16.849Z,1478851036.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:16.884Z,1478851036.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:17.260Z,1478851037.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:17.297Z,1478851037.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:17.649Z,1478851037.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:17.682Z,1478851037.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:18.053Z,1478851038.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:18.118Z,1478851038.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:18.449Z,1478851038.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:18.505Z,1478851038.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:18.849Z,1478851038.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:18.873Z,1478851038.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:19.249Z,1478851039.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:19.281Z,1478851039.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:19.649Z,1478851039.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:19.680Z,1478851039.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:20.049Z,1478851040.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:20.085Z,1478851040.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:20.449Z,1478851040.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:20.481Z,1478851040.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:20.849Z,1478851040.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:20.881Z,1478851040.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:21.249Z,1478851041.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:21.285Z,1478851041.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:21.648Z,1478851041.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:21.685Z,1478851041.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:22.049Z,1478851042.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:22.084Z,1478851042.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:22.449Z,1478851042.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:22.475Z,1478851042.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:22.849Z,1478851042.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:22.885Z,1478851042.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:23.249Z,1478851043.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:23.269Z,1478851043.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:23.649Z,1478851043.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:23.664Z,1478851043.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:24.053Z,1478851044.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:24.069Z,1478851044.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:24.453Z,1478851044.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:24.473Z,1478851044.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:24.857Z,1478851044.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:24.872Z,1478851044.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:25.261Z,1478851045.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:25.281Z,1478851045.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:25.656Z,1478851045.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:25.684Z,1478851045.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:26.049Z,1478851046.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:26.077Z,1478851046.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:26.454Z,1478851046.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:26.482Z,1478851046.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:26.850Z,1478851046.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:26.885Z,1478851046.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:27.254Z,1478851047.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:27.286Z,1478851047.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:27.650Z,1478851047.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:27.686Z,1478851047.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:28.053Z,1478851048.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:28.085Z,1478851048.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:28.449Z,1478851048.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:28.486Z,1478851048.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:28.849Z,1478851048.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:28.881Z,1478851048.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:29.249Z,1478851049.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:29.294Z,1478851049.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:29.653Z,1478851049.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:29.669Z,1478851049.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:30.055Z,1478851050.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:30.071Z,1478851050.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:30.457Z,1478851050.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:30.524Z,1478851050.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:30.856Z,1478851050.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:30.919Z,1478851050.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:31.249Z,1478851051.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:31.277Z,1478851051.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:31.649Z,1478851051.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:31.690Z,1478851051.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:32.049Z,1478851052.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:32.085Z,1478851052.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:32.449Z,1478851052.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:32.499Z,1478851052.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:32.849Z,1478851052.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:32.901Z,1478851052.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:33.249Z,1478851053.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:33.292Z,1478851053.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:33.649Z,1478851053.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:33.689Z,1478851053.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:34.049Z,1478851054.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:34.097Z,1478851054.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:34.453Z,1478851054.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:34.473Z,1478851054.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:34.852Z,1478851054.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:34.867Z,1478851054.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:35.252Z,1478851055.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:35.273Z,1478851055.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:35.655Z,1478851055.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:35.670Z,1478851055.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:36.056Z,1478851056.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:36.072Z,1478851056.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:36.456Z,1478851056.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:36.470Z,1478851056.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:36.857Z,1478851056.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:36.872Z,1478851056.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:37.249Z,1478851057.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:37.285Z,1478851057.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:37.649Z,1478851057.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:37.682Z,1478851057.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:38.049Z,1478851058.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:38.081Z,1478851058.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:38.449Z,1478851058.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:38.481Z,1478851058.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:38.849Z,1478851058.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:38.886Z,1478851058.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:39.249Z,1478851059.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:39.282Z,1478851059.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:39.649Z,1478851059.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:39.676Z,1478851059.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:40.049Z,1478851060.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:40.081Z,1478851060.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:40.449Z,1478851060.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:40.483Z,1478851060.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:40.853Z,1478851060.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:40.885Z,1478851060.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:41.249Z,1478851061.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:41.281Z,1478851061.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:41.649Z,1478851061.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:41.686Z,1478851061.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:42.049Z,1478851062.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:42.093Z,1478851062.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:42.449Z,1478851062.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:42.481Z,1478851062.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:42.849Z,1478851062.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:42.885Z,1478851062.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:43.249Z,1478851063.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:43.290Z,1478851063.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:43.649Z,1478851063.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:43.685Z,1478851063.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:44.049Z,1478851064.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:44.080Z,1478851064.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:44.449Z,1478851064.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:44.480Z,1478851064.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:44.849Z,1478851064.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:44.933Z,1478851064.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:45.253Z,1478851065.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:45.299Z,1478851065.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:45.658Z,1478851065.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:45.709Z,1478851065.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:46.057Z,1478851066.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:46.071Z,1478851066.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:46.453Z,1478851066.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:46.504Z,1478851066.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:46.857Z,1478851066.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:46.913Z,1478851066.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:47.253Z,1478851067.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:47.281Z,1478851067.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:47.656Z,1478851067.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:47.671Z,1478851067.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:48.056Z,1478851068.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:48.074Z,1478851068.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:48.461Z,1478851068.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:48.485Z,1478851068.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:48.849Z,1478851068.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:48.897Z,1478851068.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:49.249Z,1478851069.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:49.274Z,1478851069.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:49.664Z,1478851069.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:49.683Z,1478851069.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:50.049Z,1478851070.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:50.085Z,1478851070.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:50.449Z,1478851070.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:50.485Z,1478851070.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:50.849Z,1478851070.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:50.874Z,1478851070.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:51.249Z,1478851071.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:51.278Z,1478851071.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:51.649Z,1478851071.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:51.688Z,1478851071.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:52.053Z,1478851072.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:52.087Z,1478851072.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:52.449Z,1478851072.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:52.486Z,1478851072.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:52.849Z,1478851072.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:52.885Z,1478851072.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:53.249Z,1478851073.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:53.285Z,1478851073.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:53.649Z,1478851073.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:53.664Z,1478851073.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:54.049Z,1478851074.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:54.087Z,1478851074.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:54.453Z,1478851074.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:54.479Z,1478851074.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:54.854Z,1478851074.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:54.879Z,1478851074.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:55.256Z,1478851075.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:55.291Z,1478851075.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:55.652Z,1478851075.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:55.680Z,1478851075.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:56.049Z,1478851076.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:56.081Z,1478851076.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:56.454Z,1478851076.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:56.494Z,1478851076.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:56.851Z,1478851076.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:56.901Z,1478851076.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:57.257Z,1478851077.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:57.308Z,1478851077.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:57.658Z,1478851077.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:57.721Z,1478851077.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:58.054Z,1478851078.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:58.088Z,1478851078.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:58.451Z,1478851078.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:58.495Z,1478851078.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:58.858Z,1478851078.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:58.989Z,1478851078.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:59.260Z,1478851079.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:59.301Z,1478851079.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:57:59.661Z,1478851079.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:57:59.681Z,1478851079.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:00.051Z,1478851080.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:00.132Z,1478851080.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:00.451Z,1478851080.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:00.508Z,1478851080.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:00.861Z,1478851080.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:00.913Z,1478851080.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:01.263Z,1478851081.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:01.310Z,1478851081.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:01.652Z,1478851081.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:01.682Z,1478851081.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:02.050Z,1478851082.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:02.094Z,1478851082.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:02.453Z,1478851082.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:02.548Z,1478851082.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:02.858Z,1478851082.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:02.912Z,1478851082.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:03.258Z,1478851083.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:03.289Z,1478851083.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:03.662Z,1478851083.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:03.669Z,1478851083.669 [PNI_TCM](ERROR): CRC does not match. Expected:0x48555 got:0x16833
2016-11-11T07:58:03.705Z,1478851083.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:04.054Z,1478851084.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:04.105Z,1478851084.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:04.454Z,1478851084.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:04.495Z,1478851084.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:04.855Z,1478851084.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:04.900Z,1478851084.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:05.262Z,1478851085.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:05.280Z,1478851085.280 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T07:58:05.322Z,1478851085.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:05.330Z,1478851085.330 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T07:58:05.330Z,1478851085.330 [Default:CheckIn:C.Wait] Stopped
2016-11-11T07:58:05.331Z,1478851085.330 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T07:58:05.331Z,1478851085.331 [Default:CheckIn:D] Running Loop=1
2016-11-11T07:58:05.659Z,1478851085.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:05.681Z,1478851085.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:05.747Z,1478851085.747 [Default:CheckIn:D] Stopped
2016-11-11T07:58:05.747Z,1478851085.747 [Default:CheckIn:E] Running Loop=1
2016-11-11T07:58:06.063Z,1478851086.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:06.095Z,1478851086.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:06.110Z,1478851086.110 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 188.073747 min 
2016-11-11T07:58:06.110Z,1478851086.110 [Default:CheckIn:E] Stopped
2016-11-11T07:58:06.110Z,1478851086.110 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T07:58:06.111Z,1478851086.111 [Default:CheckIn] Stopped
2016-11-11T07:58:06.111Z,1478851086.111 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T07:58:06.111Z,1478851086.111 [Default:CheckIn](INFO): Running loop #19
2016-11-11T07:58:06.120Z,1478851086.120 [Default:CheckIn] Running Loop=19
2016-11-11T07:58:06.120Z,1478851086.120 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T07:58:06.120Z,1478851086.120 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T07:58:06.471Z,1478851086.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:06.499Z,1478851086.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:10.351Z,1478851090.351 [NAL9602](INFO): Powering up
2016-11-11T07:58:10.378Z,1478851090.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:10.425Z,1478851090.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:10.561Z,1478851090.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:10.585Z,1478851090.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:10.942Z,1478851090.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:10.973Z,1478851090.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:11.339Z,1478851091.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:11.388Z,1478851091.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:11.747Z,1478851091.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:11.791Z,1478851091.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:12.141Z,1478851092.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:12.161Z,1478851092.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:12.540Z,1478851092.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:12.557Z,1478851092.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:12.933Z,1478851092.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:12.987Z,1478851092.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:13.334Z,1478851093.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:13.441Z,1478851093.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:13.733Z,1478851093.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:13.777Z,1478851093.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:14.142Z,1478851094.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:14.227Z,1478851094.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:14.537Z,1478851094.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:14.589Z,1478851094.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:14.946Z,1478851094.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:15.001Z,1478851095.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:15.342Z,1478851095.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:15.402Z,1478851095.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:15.730Z,1478851095.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:15.773Z,1478851095.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:16.131Z,1478851096.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:16.177Z,1478851096.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:16.531Z,1478851096.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:16.576Z,1478851096.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:16.949Z,1478851096.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:17.005Z,1478851097.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:17.338Z,1478851097.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:17.366Z,1478851097.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:17.746Z,1478851097.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:17.796Z,1478851097.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:18.137Z,1478851098.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:18.157Z,1478851098.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:18.529Z,1478851098.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:18.562Z,1478851098.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:18.936Z,1478851098.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:18.951Z,1478851098.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:19.336Z,1478851099.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:19.350Z,1478851099.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:19.737Z,1478851099.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:19.751Z,1478851099.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:20.129Z,1478851100.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:20.161Z,1478851100.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:20.529Z,1478851100.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:20.562Z,1478851100.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:20.949Z,1478851100.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:20.963Z,1478851100.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:21.313Z,1478851101.313 [NAL9602](INFO): NAL9602 initialized
2016-11-11T07:58:21.329Z,1478851101.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:21.370Z,1478851101.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:21.729Z,1478851101.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:21.773Z,1478851101.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:22.113Z,1478851102.113 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T07:58:22.113Z,1478851102.113 [NAL9602] Data Fault, FailCount= 4
2016-11-11T07:58:22.113Z,1478851102.113 [NAL9602](ERROR): Data Fault
2016-11-11T07:58:22.130Z,1478851102.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:22.145Z,1478851102.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:22.202Z,1478851102.202 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T07:58:22.512Z,1478851102.513 [NAL9602](INFO): Powering down
2016-11-11T07:58:22.529Z,1478851102.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:22.565Z,1478851102.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:22.935Z,1478851102.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:22.988Z,1478851102.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:23.336Z,1478851103.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:23.357Z,1478851103.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:23.397Z,1478851103.397 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T07:58:23.397Z,1478851103.397 [NAL9602] No Fault, FailCount= 4
2016-11-11T07:58:23.736Z,1478851103.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:23.751Z,1478851103.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:24.137Z,1478851104.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:24.157Z,1478851104.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:24.540Z,1478851104.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:24.561Z,1478851104.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:24.929Z,1478851104.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:24.954Z,1478851104.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:25.337Z,1478851105.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:25.361Z,1478851105.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:25.729Z,1478851105.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:25.765Z,1478851105.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:26.133Z,1478851106.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:26.165Z,1478851106.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:26.529Z,1478851106.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:26.564Z,1478851106.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:26.929Z,1478851106.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:26.965Z,1478851106.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:27.329Z,1478851107.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:27.432Z,1478851107.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:27.712Z,1478851107.713 [NAL9602](INFO): Powering up NAL9602
2016-11-11T07:58:27.729Z,1478851107.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:27.776Z,1478851107.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:28.129Z,1478851108.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:28.169Z,1478851108.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:28.534Z,1478851108.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:28.585Z,1478851108.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:28.929Z,1478851108.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:28.944Z,1478851108.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:29.334Z,1478851109.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:29.381Z,1478851109.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:29.732Z,1478851109.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:29.785Z,1478851109.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:30.132Z,1478851110.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:30.153Z,1478851110.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:30.536Z,1478851110.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:30.557Z,1478851110.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:30.937Z,1478851110.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:30.952Z,1478851110.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:31.335Z,1478851111.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:31.363Z,1478851111.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:31.736Z,1478851111.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:31.763Z,1478851111.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:32.129Z,1478851112.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:32.165Z,1478851112.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:32.529Z,1478851112.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:32.563Z,1478851112.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:32.929Z,1478851112.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:32.944Z,1478851112.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:33.329Z,1478851113.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:33.349Z,1478851113.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:33.734Z,1478851113.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:33.774Z,1478851113.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:34.129Z,1478851114.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:34.143Z,1478851114.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:34.529Z,1478851114.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:34.549Z,1478851114.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:34.936Z,1478851114.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:34.951Z,1478851114.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:35.335Z,1478851115.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:35.361Z,1478851115.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:35.739Z,1478851115.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:35.754Z,1478851115.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:36.135Z,1478851116.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:36.157Z,1478851116.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:36.537Z,1478851116.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:36.552Z,1478851116.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:36.941Z,1478851116.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:36.963Z,1478851116.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:37.333Z,1478851117.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:37.365Z,1478851117.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:37.729Z,1478851117.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:37.749Z,1478851117.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:38.133Z,1478851118.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:38.169Z,1478851118.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:38.544Z,1478851118.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:38.576Z,1478851118.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:38.916Z,1478851118.916 [NAL9602](INFO): NAL9602 initialized
2016-11-11T07:58:38.933Z,1478851118.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:38.948Z,1478851118.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:39.336Z,1478851119.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:39.357Z,1478851119.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:39.740Z,1478851119.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:39.755Z,1478851119.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:40.144Z,1478851120.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:40.165Z,1478851120.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:40.551Z,1478851120.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:40.566Z,1478851120.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:40.929Z,1478851120.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:40.961Z,1478851120.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:41.330Z,1478851121.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:41.391Z,1478851121.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:41.744Z,1478851121.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:41.771Z,1478851121.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:42.144Z,1478851122.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:42.209Z,1478851122.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:42.544Z,1478851122.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:42.574Z,1478851122.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:42.937Z,1478851122.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:42.957Z,1478851122.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:43.333Z,1478851123.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:43.381Z,1478851123.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:43.735Z,1478851123.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:43.757Z,1478851123.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:44.133Z,1478851124.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:44.189Z,1478851124.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:44.532Z,1478851124.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:44.579Z,1478851124.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:44.936Z,1478851124.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:44.951Z,1478851124.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:45.332Z,1478851125.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:45.360Z,1478851125.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:45.732Z,1478851125.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:45.764Z,1478851125.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:46.140Z,1478851126.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:46.161Z,1478851126.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:46.548Z,1478851126.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:46.581Z,1478851126.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:46.944Z,1478851126.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:46.967Z,1478851126.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:47.351Z,1478851127.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:47.366Z,1478851127.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:47.752Z,1478851127.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:47.768Z,1478851127.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:48.129Z,1478851128.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:48.169Z,1478851128.169 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:48.169Z,1478851128.169 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2016-11-11T07:58:48.169Z,1478851128.169 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T07:58:48.188Z,1478851128.188 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:48.188Z,1478851128.188 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 44
2016-11-11T07:58:48.188Z,1478851128.188 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T07:58:48.216Z,1478851128.216 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T07:58:48.216Z,1478851128.216 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T07:58:48.529Z,1478851128.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:48.601Z,1478851128.601 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T07:58:48.601Z,1478851128.601 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2016-11-11T07:58:48.601Z,1478851128.602 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T07:58:48.601Z,1478851128.602 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 44
2016-11-11T07:58:48.942Z,1478851128.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:48.956Z,1478851128.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T07:58:48.957Z,1478851128.957 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:58:48.957Z,1478851128.957 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:58:48.978Z,1478851128.978 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T07:58:48.978Z,1478851128.978 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:58:48.979Z,1478851128.979 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:58:49.329Z,1478851129.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:49.361Z,1478851129.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T07:58:49.362Z,1478851129.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:49.729Z,1478851129.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:49.762Z,1478851129.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T07:58:49.763Z,1478851129.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:50.134Z,1478851130.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:50.160Z,1478851130.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T07:58:50.161Z,1478851130.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:50.529Z,1478851130.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:50.565Z,1478851130.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T07:58:50.566Z,1478851130.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:50.581Z,1478851130.581 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:50.581Z,1478851130.581 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 44
2016-11-11T07:58:50.581Z,1478851130.581 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T07:58:50.612Z,1478851130.612 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T07:58:50.929Z,1478851130.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:50.964Z,1478851130.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T07:58:50.965Z,1478851130.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:50.984Z,1478851130.984 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T07:58:50.984Z,1478851130.984 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 44
2016-11-11T07:58:51.330Z,1478851131.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:51.345Z,1478851131.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T07:58:51.346Z,1478851131.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:51.368Z,1478851131.368 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T07:58:51.369Z,1478851131.369 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T07:58:51.369Z,1478851131.369 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T07:58:51.744Z,1478851131.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:51.766Z,1478851131.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T07:58:51.768Z,1478851131.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:52.148Z,1478851132.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:52.175Z,1478851132.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T07:58:52.176Z,1478851132.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:52.544Z,1478851132.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:52.573Z,1478851132.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T07:58:52.574Z,1478851132.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:52.944Z,1478851132.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:52.971Z,1478851132.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T07:58:52.973Z,1478851132.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:53.330Z,1478851133.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:53.366Z,1478851133.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T07:58:53.367Z,1478851133.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:53.729Z,1478851133.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:53.765Z,1478851133.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T07:58:53.766Z,1478851133.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:54.139Z,1478851134.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:54.169Z,1478851134.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T07:58:54.170Z,1478851134.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:54.529Z,1478851134.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:54.545Z,1478851134.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T07:58:54.546Z,1478851134.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:54.929Z,1478851134.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:54.989Z,1478851134.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T07:58:54.990Z,1478851134.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:55.340Z,1478851135.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:55.355Z,1478851135.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T07:58:55.356Z,1478851135.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:55.739Z,1478851135.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:55.755Z,1478851135.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T07:58:55.756Z,1478851135.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:56.134Z,1478851136.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:56.169Z,1478851136.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T07:58:56.170Z,1478851136.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:56.534Z,1478851136.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:56.597Z,1478851136.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T07:58:56.598Z,1478851136.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:56.951Z,1478851136.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:57.009Z,1478851137.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T07:58:57.011Z,1478851137.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:57.352Z,1478851137.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:57.368Z,1478851137.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T07:58:57.370Z,1478851137.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:57.744Z,1478851137.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:57.781Z,1478851137.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T07:58:57.782Z,1478851137.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:58.148Z,1478851138.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:58.193Z,1478851138.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T07:58:58.194Z,1478851138.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:58.533Z,1478851138.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:58.548Z,1478851138.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T07:58:58.549Z,1478851138.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:58.937Z,1478851138.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:58.987Z,1478851138.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T07:58:58.988Z,1478851138.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:59.341Z,1478851139.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:59.395Z,1478851139.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T07:58:59.396Z,1478851139.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:58:59.736Z,1478851139.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:58:59.751Z,1478851139.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T07:58:59.752Z,1478851139.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:00.141Z,1478851140.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:00.161Z,1478851140.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T07:59:00.162Z,1478851140.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:00.536Z,1478851140.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:00.550Z,1478851140.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T07:59:00.551Z,1478851140.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:00.938Z,1478851140.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:00.953Z,1478851140.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T07:59:00.955Z,1478851140.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:01.332Z,1478851141.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:01.364Z,1478851141.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T07:59:01.365Z,1478851141.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:01.729Z,1478851141.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:01.757Z,1478851141.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T07:59:01.758Z,1478851141.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:02.152Z,1478851142.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:02.167Z,1478851142.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T07:59:02.168Z,1478851142.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:02.555Z,1478851142.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:02.569Z,1478851142.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T07:59:02.570Z,1478851142.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:02.952Z,1478851142.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:02.967Z,1478851142.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T07:59:02.968Z,1478851142.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:03.340Z,1478851143.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:03.375Z,1478851143.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T07:59:03.376Z,1478851143.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:03.734Z,1478851143.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:03.768Z,1478851143.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T07:59:03.770Z,1478851143.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:04.129Z,1478851144.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:04.171Z,1478851144.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T07:59:04.172Z,1478851144.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:04.530Z,1478851144.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:04.544Z,1478851144.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T07:59:04.545Z,1478851144.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:04.929Z,1478851144.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:04.949Z,1478851144.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T07:59:04.950Z,1478851144.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:05.334Z,1478851145.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:05.349Z,1478851145.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T07:59:05.350Z,1478851145.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:05.738Z,1478851145.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:05.753Z,1478851145.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T07:59:05.754Z,1478851145.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:06.137Z,1478851146.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:06.158Z,1478851146.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T07:59:06.160Z,1478851146.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:06.530Z,1478851146.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:06.563Z,1478851146.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T07:59:06.564Z,1478851146.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:09.934Z,1478851149.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:09.962Z,1478851149.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:10.076Z,1478851150.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:10.109Z,1478851150.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:10.428Z,1478851150.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:10.461Z,1478851150.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:10.828Z,1478851150.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:10.859Z,1478851150.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:11.221Z,1478851151.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:11.281Z,1478851151.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:11.620Z,1478851151.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:11.678Z,1478851151.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:12.024Z,1478851152.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:12.046Z,1478851152.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:12.413Z,1478851152.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:12.445Z,1478851152.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:12.813Z,1478851152.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:12.884Z,1478851152.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:13.230Z,1478851153.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:13.246Z,1478851153.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:13.613Z,1478851153.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:13.669Z,1478851153.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:14.017Z,1478851154.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:14.088Z,1478851154.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:14.418Z,1478851154.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:14.445Z,1478851154.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:14.832Z,1478851154.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:14.860Z,1478851154.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:15.223Z,1478851155.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:15.249Z,1478851155.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:15.645Z,1478851155.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:15.660Z,1478851155.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:16.024Z,1478851156.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:16.058Z,1478851156.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:16.413Z,1478851156.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:16.456Z,1478851156.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:16.814Z,1478851156.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:16.829Z,1478851156.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:17.218Z,1478851157.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:17.238Z,1478851157.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:17.620Z,1478851157.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:17.635Z,1478851157.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:18.024Z,1478851158.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:18.040Z,1478851158.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:18.416Z,1478851158.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:18.444Z,1478851158.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:18.822Z,1478851158.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:18.845Z,1478851158.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:19.217Z,1478851159.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:19.241Z,1478851159.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:19.616Z,1478851159.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:19.649Z,1478851159.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:20.039Z,1478851160.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:20.054Z,1478851160.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:20.435Z,1478851160.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:20.454Z,1478851160.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:20.832Z,1478851160.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:20.860Z,1478851160.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:21.233Z,1478851161.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:21.249Z,1478851161.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:21.614Z,1478851161.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:21.652Z,1478851161.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:22.014Z,1478851162.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:22.049Z,1478851162.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:22.413Z,1478851162.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:22.445Z,1478851162.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:22.813Z,1478851162.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:22.830Z,1478851162.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:23.216Z,1478851163.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:23.241Z,1478851163.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:23.620Z,1478851163.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:23.636Z,1478851163.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:24.025Z,1478851164.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:24.041Z,1478851164.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:24.425Z,1478851164.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:24.441Z,1478851164.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:24.813Z,1478851164.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:24.849Z,1478851164.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:25.228Z,1478851165.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:25.265Z,1478851165.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:25.624Z,1478851165.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:25.656Z,1478851165.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:26.028Z,1478851166.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:26.169Z,1478851166.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:26.431Z,1478851166.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:26.446Z,1478851166.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:26.813Z,1478851166.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:26.845Z,1478851166.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:27.213Z,1478851167.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:27.262Z,1478851167.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:27.613Z,1478851167.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:27.639Z,1478851167.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:28.013Z,1478851168.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:28.069Z,1478851168.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:28.417Z,1478851168.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:28.488Z,1478851168.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:28.813Z,1478851168.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:28.839Z,1478851168.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:29.213Z,1478851169.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:29.241Z,1478851169.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:29.613Z,1478851169.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:29.649Z,1478851169.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:30.037Z,1478851170.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:30.052Z,1478851170.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:30.424Z,1478851170.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:30.458Z,1478851170.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:30.813Z,1478851170.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:30.856Z,1478851170.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:31.214Z,1478851171.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:31.228Z,1478851171.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:31.613Z,1478851171.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:31.633Z,1478851171.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:32.028Z,1478851172.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:32.061Z,1478851172.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:32.428Z,1478851172.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:32.461Z,1478851172.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:32.813Z,1478851172.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:32.833Z,1478851172.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:33.216Z,1478851173.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:33.237Z,1478851173.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:33.621Z,1478851173.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:33.635Z,1478851173.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:34.019Z,1478851174.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:34.034Z,1478851174.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:34.420Z,1478851174.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:34.435Z,1478851174.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:34.821Z,1478851174.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:34.836Z,1478851174.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:35.216Z,1478851175.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:35.244Z,1478851175.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:35.620Z,1478851175.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:35.641Z,1478851175.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:36.017Z,1478851176.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:36.040Z,1478851176.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:36.424Z,1478851176.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:36.440Z,1478851176.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:36.813Z,1478851176.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:36.846Z,1478851176.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:37.214Z,1478851177.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:37.241Z,1478851177.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:37.613Z,1478851177.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:37.645Z,1478851177.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:38.021Z,1478851178.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:38.055Z,1478851178.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:38.417Z,1478851178.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:38.443Z,1478851178.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:38.813Z,1478851178.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:38.841Z,1478851178.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:39.213Z,1478851179.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:39.244Z,1478851179.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:39.614Z,1478851179.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:39.633Z,1478851179.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:40.013Z,1478851180.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:40.033Z,1478851180.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:40.419Z,1478851180.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:40.473Z,1478851180.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:40.828Z,1478851180.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:40.891Z,1478851180.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:41.230Z,1478851181.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:41.245Z,1478851181.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:41.620Z,1478851181.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:41.641Z,1478851181.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:42.022Z,1478851182.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:42.079Z,1478851182.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:42.422Z,1478851182.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:42.441Z,1478851182.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:42.813Z,1478851182.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:42.862Z,1478851182.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:43.213Z,1478851183.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:43.262Z,1478851183.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:43.613Z,1478851183.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:43.649Z,1478851183.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:44.013Z,1478851184.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:44.045Z,1478851184.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:44.413Z,1478851184.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:44.449Z,1478851184.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:44.840Z,1478851184.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:44.855Z,1478851184.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:45.228Z,1478851185.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:45.259Z,1478851185.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:45.613Z,1478851185.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:45.645Z,1478851185.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:46.021Z,1478851186.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:46.053Z,1478851186.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:46.417Z,1478851186.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:46.449Z,1478851186.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:46.813Z,1478851186.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:46.840Z,1478851186.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:47.213Z,1478851187.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:47.233Z,1478851187.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:47.617Z,1478851187.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:47.637Z,1478851187.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:48.017Z,1478851188.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:48.031Z,1478851188.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:48.421Z,1478851188.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:48.441Z,1478851188.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:48.819Z,1478851188.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:48.834Z,1478851188.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:49.228Z,1478851189.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:49.249Z,1478851189.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:49.628Z,1478851189.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:49.657Z,1478851189.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:50.032Z,1478851190.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:50.060Z,1478851190.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:50.435Z,1478851190.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:50.450Z,1478851190.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:50.818Z,1478851190.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:50.844Z,1478851190.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:51.225Z,1478851191.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:51.247Z,1478851191.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:51.614Z,1478851191.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:51.646Z,1478851191.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:52.017Z,1478851192.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:52.053Z,1478851192.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:52.413Z,1478851192.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:52.441Z,1478851192.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:52.814Z,1478851192.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:52.853Z,1478851192.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:53.213Z,1478851193.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:53.249Z,1478851193.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:53.648Z,1478851193.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:53.663Z,1478851193.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:54.028Z,1478851194.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:54.057Z,1478851194.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:54.432Z,1478851194.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:54.457Z,1478851194.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:54.828Z,1478851194.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:54.889Z,1478851194.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:55.232Z,1478851195.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:55.292Z,1478851195.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:55.619Z,1478851195.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:55.638Z,1478851195.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:56.018Z,1478851196.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:56.073Z,1478851196.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:56.421Z,1478851196.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:56.447Z,1478851196.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:56.817Z,1478851196.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:56.869Z,1478851196.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:57.213Z,1478851197.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:57.276Z,1478851197.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:57.614Z,1478851197.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:57.648Z,1478851197.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:58.014Z,1478851198.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:58.040Z,1478851198.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:58.429Z,1478851198.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:58.449Z,1478851198.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:58.837Z,1478851198.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:58.851Z,1478851198.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:59.227Z,1478851199.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:59.260Z,1478851199.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T07:59:59.640Z,1478851199.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T07:59:59.655Z,1478851199.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:00.036Z,1478851200.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:00.058Z,1478851200.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:00.414Z,1478851200.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:00.450Z,1478851200.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:00.821Z,1478851200.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:00.847Z,1478851200.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:01.214Z,1478851201.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:01.250Z,1478851201.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:01.613Z,1478851201.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:01.649Z,1478851201.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:02.017Z,1478851202.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:02.049Z,1478851202.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:02.413Z,1478851202.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:02.452Z,1478851202.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:02.814Z,1478851202.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:02.842Z,1478851202.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:03.217Z,1478851203.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:03.238Z,1478851203.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:03.631Z,1478851203.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:03.653Z,1478851203.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:04.029Z,1478851204.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:04.048Z,1478851204.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:04.425Z,1478851204.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:04.440Z,1478851204.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:04.821Z,1478851204.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:04.849Z,1478851204.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:05.225Z,1478851205.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:05.245Z,1478851205.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:05.613Z,1478851205.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:05.645Z,1478851205.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:06.014Z,1478851206.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:06.048Z,1478851206.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:06.435Z,1478851206.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:06.450Z,1478851206.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:06.835Z,1478851206.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:06.851Z,1478851206.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:10.285Z,1478851210.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:10.357Z,1478851210.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:10.450Z,1478851210.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:10.485Z,1478851210.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:10.829Z,1478851210.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:10.849Z,1478851210.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:11.244Z,1478851211.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:11.289Z,1478851211.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:11.633Z,1478851211.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:11.669Z,1478851211.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:12.032Z,1478851212.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:12.075Z,1478851212.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:12.436Z,1478851212.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:12.482Z,1478851212.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:12.833Z,1478851212.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:12.848Z,1478851212.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:13.234Z,1478851213.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:13.249Z,1478851213.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:13.637Z,1478851213.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:13.651Z,1478851213.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:14.032Z,1478851214.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:14.056Z,1478851214.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:14.436Z,1478851214.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:14.457Z,1478851214.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:14.837Z,1478851214.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:14.852Z,1478851214.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:15.232Z,1478851215.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:15.260Z,1478851215.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:15.637Z,1478851215.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:15.657Z,1478851215.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:16.037Z,1478851216.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:16.052Z,1478851216.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:16.432Z,1478851216.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:16.464Z,1478851216.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:16.837Z,1478851216.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:16.857Z,1478851216.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:17.237Z,1478851217.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:17.257Z,1478851217.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:17.641Z,1478851217.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:17.661Z,1478851217.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:18.029Z,1478851218.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:18.062Z,1478851218.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:18.429Z,1478851218.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:18.463Z,1478851218.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:18.829Z,1478851218.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:18.861Z,1478851218.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:19.229Z,1478851219.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:19.263Z,1478851219.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:19.629Z,1478851219.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:19.661Z,1478851219.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:20.029Z,1478851220.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:20.057Z,1478851220.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:20.429Z,1478851220.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:20.465Z,1478851220.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:20.829Z,1478851220.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:20.866Z,1478851220.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:21.234Z,1478851221.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:21.266Z,1478851221.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:21.629Z,1478851221.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:21.673Z,1478851221.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:22.029Z,1478851222.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:22.073Z,1478851222.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:22.434Z,1478851222.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:22.461Z,1478851222.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:22.833Z,1478851222.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:22.873Z,1478851222.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:23.233Z,1478851223.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:23.273Z,1478851223.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:23.633Z,1478851223.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:23.673Z,1478851223.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:24.037Z,1478851224.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:24.072Z,1478851224.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:24.436Z,1478851224.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:24.517Z,1478851224.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:24.837Z,1478851224.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:24.873Z,1478851224.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:25.218Z,1478851225.217 [NAL9602](INFO): SBD MO Status=2, MOMSN=340, MT Status=2, MTMSN=0
2016-11-11T08:00:25.218Z,1478851225.218 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T08:00:25.235Z,1478851225.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:25.292Z,1478851225.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:25.647Z,1478851225.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:25.682Z,1478851225.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:26.037Z,1478851226.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:26.097Z,1478851226.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:26.437Z,1478851226.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:26.487Z,1478851226.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:26.836Z,1478851226.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:26.851Z,1478851226.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:27.237Z,1478851227.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:27.257Z,1478851227.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:27.639Z,1478851227.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:27.654Z,1478851227.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:28.037Z,1478851228.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:28.052Z,1478851228.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:28.441Z,1478851228.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:28.456Z,1478851228.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:28.840Z,1478851228.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:28.855Z,1478851228.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:29.229Z,1478851229.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:29.264Z,1478851229.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:29.656Z,1478851229.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:29.671Z,1478851229.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:30.050Z,1478851230.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:30.073Z,1478851230.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:30.429Z,1478851230.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:30.461Z,1478851230.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:30.845Z,1478851230.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:30.865Z,1478851230.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:31.233Z,1478851231.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:31.259Z,1478851231.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:31.629Z,1478851231.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:31.661Z,1478851231.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:32.029Z,1478851232.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:32.057Z,1478851232.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:32.429Z,1478851232.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:32.465Z,1478851232.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:32.829Z,1478851232.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:32.856Z,1478851232.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:33.234Z,1478851233.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:33.265Z,1478851233.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:33.648Z,1478851233.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:33.677Z,1478851233.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:34.060Z,1478851234.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:34.075Z,1478851234.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:34.437Z,1478851234.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:34.457Z,1478851234.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:34.833Z,1478851234.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:34.853Z,1478851234.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:35.238Z,1478851235.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:35.277Z,1478851235.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:35.636Z,1478851235.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:35.651Z,1478851235.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:36.040Z,1478851236.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:36.055Z,1478851236.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:36.432Z,1478851236.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:36.461Z,1478851236.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:36.833Z,1478851236.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:36.856Z,1478851236.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:37.233Z,1478851237.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:37.256Z,1478851237.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:37.640Z,1478851237.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:37.661Z,1478851237.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:38.052Z,1478851238.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:38.068Z,1478851238.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:38.448Z,1478851238.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:38.464Z,1478851238.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:38.850Z,1478851238.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:38.925Z,1478851238.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:39.240Z,1478851239.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:39.273Z,1478851239.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:39.633Z,1478851239.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:39.684Z,1478851239.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:40.037Z,1478851240.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:40.057Z,1478851240.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:40.433Z,1478851240.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:40.485Z,1478851240.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:40.834Z,1478851240.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:40.885Z,1478851240.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:41.237Z,1478851241.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:41.257Z,1478851241.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:41.633Z,1478851241.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:41.653Z,1478851241.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:42.037Z,1478851242.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:42.057Z,1478851242.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:42.436Z,1478851242.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:42.451Z,1478851242.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:42.844Z,1478851242.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:42.859Z,1478851242.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:43.245Z,1478851243.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:43.265Z,1478851243.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:43.650Z,1478851243.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:43.673Z,1478851243.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:44.044Z,1478851244.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:44.072Z,1478851244.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:44.429Z,1478851244.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:44.461Z,1478851244.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:44.829Z,1478851244.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:44.864Z,1478851244.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:45.229Z,1478851245.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:45.261Z,1478851245.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:45.645Z,1478851245.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:45.665Z,1478851245.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:46.029Z,1478851246.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:46.062Z,1478851246.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:46.429Z,1478851246.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:46.461Z,1478851246.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:46.837Z,1478851246.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:46.862Z,1478851246.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:47.229Z,1478851247.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:47.262Z,1478851247.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:47.634Z,1478851247.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:47.659Z,1478851247.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:48.049Z,1478851248.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:48.069Z,1478851248.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:48.456Z,1478851248.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:48.477Z,1478851248.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:48.852Z,1478851248.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:48.867Z,1478851248.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:49.255Z,1478851249.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:49.270Z,1478851249.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:49.629Z,1478851249.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:49.644Z,1478851249.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:50.037Z,1478851250.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:50.073Z,1478851250.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:50.437Z,1478851250.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:50.474Z,1478851250.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:50.830Z,1478851250.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:50.849Z,1478851250.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:51.237Z,1478851251.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:51.257Z,1478851251.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:51.632Z,1478851251.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:51.656Z,1478851251.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:52.040Z,1478851252.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:52.055Z,1478851252.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:52.432Z,1478851252.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:52.489Z,1478851252.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:52.833Z,1478851252.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:52.877Z,1478851252.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:53.252Z,1478851253.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:53.267Z,1478851253.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:53.644Z,1478851253.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:53.666Z,1478851253.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:54.033Z,1478851254.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:54.069Z,1478851254.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:54.429Z,1478851254.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:54.477Z,1478851254.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:54.829Z,1478851254.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:54.861Z,1478851254.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:55.233Z,1478851255.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:55.285Z,1478851255.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:55.643Z,1478851255.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:55.694Z,1478851255.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:56.040Z,1478851256.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:56.070Z,1478851256.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:56.437Z,1478851256.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:56.471Z,1478851256.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:56.836Z,1478851256.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:56.851Z,1478851256.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:57.232Z,1478851257.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:57.257Z,1478851257.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:57.633Z,1478851257.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:57.654Z,1478851257.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:58.037Z,1478851258.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:58.052Z,1478851258.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:58.432Z,1478851258.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:58.463Z,1478851258.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:58.840Z,1478851258.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:58.856Z,1478851258.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:59.229Z,1478851259.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:59.264Z,1478851259.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:00:59.629Z,1478851259.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:00:59.661Z,1478851259.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:00.040Z,1478851260.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:00.061Z,1478851260.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:00.429Z,1478851260.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:00.464Z,1478851260.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:00.829Z,1478851260.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:00.861Z,1478851260.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:01.229Z,1478851261.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:01.255Z,1478851261.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:01.629Z,1478851261.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:01.660Z,1478851261.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:02.029Z,1478851262.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:02.061Z,1478851262.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:02.445Z,1478851262.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:02.460Z,1478851262.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:02.829Z,1478851262.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:02.855Z,1478851262.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:03.229Z,1478851263.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:03.269Z,1478851263.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:03.633Z,1478851263.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:03.669Z,1478851263.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:04.029Z,1478851264.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:04.061Z,1478851264.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:04.448Z,1478851264.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:04.479Z,1478851264.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:04.851Z,1478851264.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:04.867Z,1478851264.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:05.238Z,1478851265.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:05.270Z,1478851265.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:05.629Z,1478851265.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:05.669Z,1478851265.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:06.029Z,1478851266.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:06.049Z,1478851266.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:06.430Z,1478851266.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:06.449Z,1478851266.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:06.835Z,1478851266.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:06.854Z,1478851266.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:10.112Z,1478851270.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:10.217Z,1478851270.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:10.308Z,1478851270.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:10.337Z,1478851270.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:10.704Z,1478851270.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:10.719Z,1478851270.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:11.106Z,1478851271.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:11.155Z,1478851271.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:11.500Z,1478851271.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:11.530Z,1478851271.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:11.904Z,1478851271.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:11.942Z,1478851271.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:12.305Z,1478851272.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:12.320Z,1478851272.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:12.697Z,1478851272.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:12.762Z,1478851272.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:13.115Z,1478851273.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:13.137Z,1478851273.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:13.520Z,1478851273.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:13.535Z,1478851273.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:13.898Z,1478851273.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:13.950Z,1478851273.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:14.305Z,1478851274.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:14.341Z,1478851274.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:14.698Z,1478851274.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:14.733Z,1478851274.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:15.098Z,1478851275.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:15.121Z,1478851275.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:15.501Z,1478851275.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:15.539Z,1478851275.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:15.897Z,1478851275.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:15.941Z,1478851275.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:16.297Z,1478851276.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:16.317Z,1478851276.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:16.701Z,1478851276.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:16.715Z,1478851276.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:17.102Z,1478851277.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:17.127Z,1478851277.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:17.501Z,1478851277.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:17.518Z,1478851277.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:17.903Z,1478851277.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:17.925Z,1478851277.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:18.306Z,1478851278.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:18.321Z,1478851278.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:18.700Z,1478851278.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:18.728Z,1478851278.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:19.105Z,1478851279.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:19.133Z,1478851279.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:19.506Z,1478851279.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:19.521Z,1478851279.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:19.897Z,1478851279.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:19.929Z,1478851279.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:20.297Z,1478851280.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:20.329Z,1478851280.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:20.698Z,1478851280.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:20.729Z,1478851280.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:21.097Z,1478851281.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:21.129Z,1478851281.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:21.519Z,1478851281.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:21.534Z,1478851281.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:21.921Z,1478851281.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:21.961Z,1478851281.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:22.298Z,1478851282.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:22.333Z,1478851282.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:22.703Z,1478851282.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:22.743Z,1478851282.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:23.101Z,1478851283.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:23.116Z,1478851283.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:23.501Z,1478851283.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:23.521Z,1478851283.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:23.905Z,1478851283.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:23.919Z,1478851283.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:24.302Z,1478851284.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:24.325Z,1478851284.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:24.704Z,1478851284.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:24.773Z,1478851284.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:25.104Z,1478851285.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:25.125Z,1478851285.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:25.508Z,1478851285.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:25.561Z,1478851285.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:25.914Z,1478851285.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:25.933Z,1478851285.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:26.317Z,1478851286.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:26.369Z,1478851286.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:26.708Z,1478851286.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:26.757Z,1478851286.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:27.101Z,1478851287.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:27.123Z,1478851287.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:27.500Z,1478851287.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:27.529Z,1478851287.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:27.905Z,1478851287.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:27.928Z,1478851287.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:28.298Z,1478851288.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:28.329Z,1478851288.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:28.697Z,1478851288.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:28.722Z,1478851288.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:29.105Z,1478851289.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:29.129Z,1478851289.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:29.497Z,1478851289.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:29.529Z,1478851289.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:29.897Z,1478851289.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:29.931Z,1478851289.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:30.323Z,1478851290.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:30.343Z,1478851290.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:30.708Z,1478851290.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:30.741Z,1478851290.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:31.097Z,1478851291.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:31.132Z,1478851291.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:31.498Z,1478851291.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:31.537Z,1478851291.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:31.898Z,1478851291.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:31.933Z,1478851291.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:32.297Z,1478851292.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:32.317Z,1478851292.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:32.701Z,1478851292.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:32.721Z,1478851292.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:33.104Z,1478851293.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:33.119Z,1478851293.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:33.503Z,1478851293.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:33.525Z,1478851293.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:33.914Z,1478851293.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:33.929Z,1478851293.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:34.300Z,1478851294.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:34.324Z,1478851294.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:34.718Z,1478851294.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:34.737Z,1478851294.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:35.119Z,1478851295.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:35.135Z,1478851295.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:35.498Z,1478851295.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:35.527Z,1478851295.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:35.897Z,1478851295.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:35.929Z,1478851295.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:36.302Z,1478851296.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:36.329Z,1478851296.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:36.697Z,1478851296.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:36.729Z,1478851296.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:37.097Z,1478851297.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:37.132Z,1478851297.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:37.498Z,1478851297.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:37.530Z,1478851297.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:37.902Z,1478851297.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:37.929Z,1478851297.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:38.297Z,1478851298.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:38.361Z,1478851298.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:38.706Z,1478851298.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:38.757Z,1478851298.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:39.100Z,1478851299.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:39.128Z,1478851299.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:39.501Z,1478851299.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:39.537Z,1478851299.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:39.908Z,1478851299.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:39.963Z,1478851299.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:40.300Z,1478851300.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:40.333Z,1478851300.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:40.697Z,1478851300.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:40.746Z,1478851300.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:41.098Z,1478851301.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:41.162Z,1478851301.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:41.497Z,1478851301.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:41.529Z,1478851301.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:41.898Z,1478851301.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:41.929Z,1478851301.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:42.298Z,1478851302.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:42.314Z,1478851302.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:42.701Z,1478851302.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:42.725Z,1478851302.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:43.113Z,1478851303.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:43.133Z,1478851303.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:43.513Z,1478851303.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:43.528Z,1478851303.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:43.900Z,1478851303.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:43.929Z,1478851303.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:44.305Z,1478851304.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:44.322Z,1478851304.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:44.720Z,1478851304.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:44.735Z,1478851304.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:45.100Z,1478851305.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:45.137Z,1478851305.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:45.497Z,1478851305.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:45.525Z,1478851305.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:45.898Z,1478851305.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:45.924Z,1478851305.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:46.297Z,1478851306.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:46.329Z,1478851306.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:46.697Z,1478851306.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:46.737Z,1478851306.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:47.101Z,1478851307.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:47.116Z,1478851307.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:47.501Z,1478851307.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:47.524Z,1478851307.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:47.904Z,1478851307.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:47.919Z,1478851307.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:48.310Z,1478851308.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:48.325Z,1478851308.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:48.706Z,1478851308.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:48.733Z,1478851308.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:49.097Z,1478851309.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:49.137Z,1478851309.137 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:49.137Z,1478851309.137 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2016-11-11T08:01:49.137Z,1478851309.137 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:01:49.149Z,1478851309.149 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:49.149Z,1478851309.149 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 45
2016-11-11T08:01:49.149Z,1478851309.149 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:01:49.183Z,1478851309.183 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:01:49.184Z,1478851309.184 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:01:49.497Z,1478851309.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:49.564Z,1478851309.564 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:01:49.564Z,1478851309.564 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2016-11-11T08:01:49.565Z,1478851309.565 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:01:49.565Z,1478851309.565 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 45
2016-11-11T08:01:49.897Z,1478851309.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:49.936Z,1478851309.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:01:49.937Z,1478851309.937 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:01:49.937Z,1478851309.937 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:01:49.946Z,1478851309.946 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:01:49.946Z,1478851309.946 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:01:49.947Z,1478851309.947 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:01:50.302Z,1478851310.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:50.316Z,1478851310.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:01:50.317Z,1478851310.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:50.705Z,1478851310.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:50.740Z,1478851310.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:01:50.741Z,1478851310.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:51.097Z,1478851311.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:51.128Z,1478851311.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:01:51.130Z,1478851311.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:51.505Z,1478851311.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:51.530Z,1478851311.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:01:51.531Z,1478851311.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:51.538Z,1478851311.538 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:51.538Z,1478851311.538 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 45
2016-11-11T08:01:51.538Z,1478851311.538 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:01:51.552Z,1478851311.552 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:01:51.898Z,1478851311.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:51.937Z,1478851311.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:01:51.938Z,1478851311.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:51.990Z,1478851311.990 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:01:51.991Z,1478851311.991 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 45
2016-11-11T08:01:52.305Z,1478851312.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:52.325Z,1478851312.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T08:01:52.326Z,1478851312.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:52.352Z,1478851312.352 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:01:52.353Z,1478851312.353 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:01:52.353Z,1478851312.353 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:01:52.700Z,1478851312.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:52.727Z,1478851312.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T08:01:52.728Z,1478851312.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:53.104Z,1478851313.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:53.184Z,1478851313.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T08:01:53.185Z,1478851313.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:53.497Z,1478851313.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:53.529Z,1478851313.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T08:01:53.530Z,1478851313.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:53.897Z,1478851313.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:53.945Z,1478851313.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T08:01:53.946Z,1478851313.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:54.298Z,1478851314.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:54.328Z,1478851314.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T08:01:54.329Z,1478851314.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:54.698Z,1478851314.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:54.753Z,1478851314.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T08:01:54.754Z,1478851314.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:55.101Z,1478851315.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:55.150Z,1478851315.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T08:01:55.151Z,1478851315.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:55.497Z,1478851315.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:55.534Z,1478851315.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T08:01:55.535Z,1478851315.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:55.897Z,1478851315.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:55.929Z,1478851315.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T08:01:55.930Z,1478851315.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:56.297Z,1478851316.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:56.332Z,1478851316.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T08:01:56.333Z,1478851316.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:56.697Z,1478851316.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:56.738Z,1478851316.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T08:01:56.739Z,1478851316.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:57.104Z,1478851317.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:57.125Z,1478851317.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T08:01:57.126Z,1478851317.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:57.505Z,1478851317.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:57.522Z,1478851317.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T08:01:57.523Z,1478851317.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:57.904Z,1478851317.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:57.918Z,1478851317.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T08:01:57.919Z,1478851317.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:58.300Z,1478851318.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:58.333Z,1478851318.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T08:01:58.334Z,1478851318.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:58.705Z,1478851318.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:58.725Z,1478851318.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T08:01:58.725Z,1478851318.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:59.105Z,1478851319.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:59.124Z,1478851319.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T08:01:59.125Z,1478851319.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:59.497Z,1478851319.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:59.529Z,1478851319.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T08:01:59.530Z,1478851319.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:01:59.897Z,1478851319.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:01:59.930Z,1478851319.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T08:01:59.931Z,1478851319.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:00.297Z,1478851320.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:00.331Z,1478851320.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T08:02:00.332Z,1478851320.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:00.697Z,1478851320.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:00.729Z,1478851320.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T08:02:00.730Z,1478851320.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:01.097Z,1478851321.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:01.130Z,1478851321.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T08:02:01.131Z,1478851321.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:01.497Z,1478851321.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:01.531Z,1478851321.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T08:02:01.532Z,1478851321.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:01.909Z,1478851321.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:01.929Z,1478851321.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T08:02:01.930Z,1478851321.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:02.309Z,1478851322.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:02.328Z,1478851322.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T08:02:02.329Z,1478851322.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:02.698Z,1478851322.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:02.724Z,1478851322.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T08:02:02.725Z,1478851322.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:03.086Z,1478851323.086 [NAL9602](INFO): SBD MO Status=2, MOMSN=340, MT Status=2, MTMSN=0
2016-11-11T08:02:03.086Z,1478851323.086 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T08:02:03.116Z,1478851323.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:03.160Z,1478851323.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T08:02:03.161Z,1478851323.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:03.522Z,1478851323.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:03.544Z,1478851323.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T08:02:03.545Z,1478851323.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:03.898Z,1478851323.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:03.912Z,1478851323.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T08:02:03.913Z,1478851323.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:04.306Z,1478851324.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:04.336Z,1478851324.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T08:02:04.337Z,1478851324.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:04.701Z,1478851324.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:04.720Z,1478851324.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T08:02:04.721Z,1478851324.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:05.101Z,1478851325.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:05.115Z,1478851325.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T08:02:05.116Z,1478851325.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:05.502Z,1478851325.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:05.517Z,1478851325.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T08:02:05.518Z,1478851325.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:05.903Z,1478851325.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:05.917Z,1478851325.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T08:02:05.918Z,1478851325.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:06.306Z,1478851326.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:06.331Z,1478851326.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T08:02:06.332Z,1478851326.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:06.706Z,1478851326.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:06.720Z,1478851326.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T08:02:06.721Z,1478851326.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:07.118Z,1478851327.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:07.188Z,1478851327.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2016-11-11T08:02:07.189Z,1478851327.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:10.466Z,1478851330.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:10.534Z,1478851330.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:10.609Z,1478851330.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:10.655Z,1478851330.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:11.001Z,1478851331.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:11.054Z,1478851331.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:11.406Z,1478851331.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:11.441Z,1478851331.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:11.802Z,1478851331.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:11.850Z,1478851331.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:12.202Z,1478851332.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:12.250Z,1478851332.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:12.603Z,1478851332.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:12.618Z,1478851332.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:13.010Z,1478851333.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:13.039Z,1478851333.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:13.405Z,1478851333.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:13.421Z,1478851333.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:13.809Z,1478851333.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:13.826Z,1478851333.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:14.205Z,1478851334.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:14.229Z,1478851334.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:14.608Z,1478851334.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:14.623Z,1478851334.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:15.008Z,1478851335.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:15.037Z,1478851335.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:15.401Z,1478851335.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:15.439Z,1478851335.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:15.801Z,1478851335.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:15.840Z,1478851335.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:16.201Z,1478851336.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:16.229Z,1478851336.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:16.601Z,1478851336.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:16.638Z,1478851336.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:17.001Z,1478851337.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:17.035Z,1478851337.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:17.401Z,1478851337.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:17.440Z,1478851337.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:17.801Z,1478851337.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:17.837Z,1478851337.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:18.201Z,1478851338.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:18.239Z,1478851338.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:18.601Z,1478851338.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:18.636Z,1478851338.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:19.016Z,1478851339.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:19.062Z,1478851339.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:19.412Z,1478851339.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:19.464Z,1478851339.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:19.801Z,1478851339.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:19.864Z,1478851339.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:20.201Z,1478851340.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:20.239Z,1478851340.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:20.601Z,1478851340.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:20.633Z,1478851340.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:21.006Z,1478851341.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:21.039Z,1478851341.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:21.401Z,1478851341.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:21.437Z,1478851341.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:21.801Z,1478851341.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:21.839Z,1478851341.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:22.202Z,1478851342.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:22.245Z,1478851342.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:22.606Z,1478851342.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:22.652Z,1478851342.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:23.005Z,1478851343.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:23.082Z,1478851343.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:23.401Z,1478851343.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:23.445Z,1478851343.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:23.804Z,1478851343.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:23.845Z,1478851343.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:24.208Z,1478851344.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:24.242Z,1478851344.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:24.609Z,1478851344.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:24.705Z,1478851344.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:25.001Z,1478851345.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:25.041Z,1478851345.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:25.401Z,1478851345.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:25.437Z,1478851345.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:25.801Z,1478851345.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:25.845Z,1478851345.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:26.201Z,1478851346.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:26.237Z,1478851346.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:26.601Z,1478851346.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:26.642Z,1478851346.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:27.001Z,1478851347.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:27.041Z,1478851347.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:27.401Z,1478851347.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:27.410Z,1478851347.410 [BPC1](ERROR): Failed to receive battery data
2016-11-11T08:02:27.410Z,1478851347.410 [BPC1] Communications Fault, FailCount= 1
2016-11-11T08:02:27.410Z,1478851347.410 [BPC1](ERROR): Communications Fault
2016-11-11T08:02:27.445Z,1478851347.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:27.486Z,1478851347.486 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T08:02:27.815Z,1478851347.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:27.842Z,1478851347.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:28.201Z,1478851348.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:28.216Z,1478851348.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:28.604Z,1478851348.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:28.629Z,1478851348.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:28.666Z,1478851348.666 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:02:28.666Z,1478851348.666 [BPC1] No Fault, FailCount= 1
2016-11-11T08:02:29.008Z,1478851349.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:29.070Z,1478851349.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:29.405Z,1478851349.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:29.430Z,1478851349.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:29.804Z,1478851349.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:29.829Z,1478851349.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:30.201Z,1478851350.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:30.237Z,1478851350.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:30.613Z,1478851350.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:30.631Z,1478851350.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:31.013Z,1478851351.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:31.031Z,1478851351.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:31.416Z,1478851351.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:31.433Z,1478851351.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:31.802Z,1478851351.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:31.830Z,1478851351.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:32.201Z,1478851352.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:32.236Z,1478851352.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:32.601Z,1478851352.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:32.642Z,1478851352.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:33.001Z,1478851353.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:33.050Z,1478851353.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:33.405Z,1478851353.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:33.433Z,1478851353.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:33.805Z,1478851353.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:33.833Z,1478851353.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:34.201Z,1478851354.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:34.236Z,1478851354.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:34.605Z,1478851354.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:34.633Z,1478851354.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:35.001Z,1478851355.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:35.039Z,1478851355.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:35.401Z,1478851355.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:35.440Z,1478851355.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:35.805Z,1478851355.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:35.859Z,1478851355.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:36.209Z,1478851356.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:36.268Z,1478851356.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:36.604Z,1478851356.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:36.619Z,1478851356.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:37.009Z,1478851357.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:37.034Z,1478851357.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:37.411Z,1478851357.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:37.430Z,1478851357.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:37.809Z,1478851357.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:37.832Z,1478851357.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:38.213Z,1478851358.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:38.230Z,1478851358.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:38.616Z,1478851358.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:38.634Z,1478851358.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:39.001Z,1478851359.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:39.042Z,1478851359.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:39.405Z,1478851359.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:39.441Z,1478851359.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:39.801Z,1478851359.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:39.870Z,1478851359.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:40.201Z,1478851360.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:40.235Z,1478851360.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:40.606Z,1478851360.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:40.641Z,1478851360.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:41.005Z,1478851361.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:41.053Z,1478851361.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:41.401Z,1478851361.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:41.477Z,1478851361.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:41.798Z,1478851361.797 [NAL9602](INFO): SBD MO Status=2, MOMSN=340, MT Status=2, MTMSN=0
2016-11-11T08:02:41.798Z,1478851361.798 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T08:02:41.815Z,1478851361.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:41.865Z,1478851361.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:42.212Z,1478851362.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:42.229Z,1478851362.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:42.601Z,1478851362.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:42.646Z,1478851362.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:43.002Z,1478851363.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:43.040Z,1478851363.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:43.401Z,1478851363.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:43.441Z,1478851363.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:43.801Z,1478851363.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:43.861Z,1478851363.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:44.205Z,1478851364.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:44.241Z,1478851364.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:44.605Z,1478851364.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:44.641Z,1478851364.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:45.005Z,1478851365.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:45.020Z,1478851365.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:45.405Z,1478851365.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:45.456Z,1478851365.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:45.809Z,1478851365.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:45.847Z,1478851365.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:46.215Z,1478851366.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:46.262Z,1478851366.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:46.612Z,1478851366.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:46.629Z,1478851366.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:47.016Z,1478851367.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:47.073Z,1478851367.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:47.416Z,1478851367.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:47.432Z,1478851367.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:47.812Z,1478851367.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:47.827Z,1478851367.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:48.215Z,1478851368.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:48.233Z,1478851368.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:48.609Z,1478851368.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:48.631Z,1478851368.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:49.001Z,1478851369.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:49.036Z,1478851369.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:49.409Z,1478851369.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:49.433Z,1478851369.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:49.801Z,1478851369.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:49.840Z,1478851369.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:50.202Z,1478851370.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:50.240Z,1478851370.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:50.601Z,1478851370.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:50.635Z,1478851370.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:51.002Z,1478851371.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:51.042Z,1478851371.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:51.420Z,1478851371.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:51.446Z,1478851371.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:51.813Z,1478851371.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:51.845Z,1478851371.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:52.209Z,1478851372.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:52.240Z,1478851372.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:52.606Z,1478851372.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:52.621Z,1478851372.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:53.001Z,1478851373.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:53.040Z,1478851373.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:53.426Z,1478851373.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:53.446Z,1478851373.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:53.820Z,1478851373.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:53.865Z,1478851373.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:54.207Z,1478851374.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:54.255Z,1478851374.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:54.613Z,1478851374.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:54.640Z,1478851374.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:55.012Z,1478851375.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:55.049Z,1478851375.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:55.408Z,1478851375.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:55.456Z,1478851375.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:55.812Z,1478851375.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:55.861Z,1478851375.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:56.210Z,1478851376.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:56.283Z,1478851376.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:56.611Z,1478851376.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:56.639Z,1478851376.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:57.004Z,1478851377.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:57.054Z,1478851377.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:57.407Z,1478851377.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:57.437Z,1478851377.437 [BPC1](ERROR): Failed to parse message.
2016-11-11T08:02:57.437Z,1478851377.437 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T08:02:57.437Z,1478851377.437 [BPC1] Data Fault, FailCount= 1
2016-11-11T08:02:57.437Z,1478851377.437 [BPC1](ERROR): Data Fault
2016-11-11T08:02:57.462Z,1478851377.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:57.536Z,1478851377.536 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T08:02:57.803Z,1478851377.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:57.871Z,1478851377.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:58.213Z,1478851378.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:58.276Z,1478851378.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:58.609Z,1478851378.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:58.660Z,1478851378.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:58.710Z,1478851378.710 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:02:58.710Z,1478851378.710 [BPC1] No Fault, FailCount= 1
2016-11-11T08:02:59.011Z,1478851379.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:59.147Z,1478851379.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:59.404Z,1478851379.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:59.451Z,1478851379.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:02:59.813Z,1478851379.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:02:59.860Z,1478851379.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:00.207Z,1478851380.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:00.233Z,1478851380.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:00.612Z,1478851380.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:00.641Z,1478851380.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:01.003Z,1478851381.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:01.053Z,1478851381.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:01.429Z,1478851381.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:01.456Z,1478851381.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:01.801Z,1478851381.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:01.864Z,1478851381.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:02.216Z,1478851382.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:02.241Z,1478851382.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:02.620Z,1478851382.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:02.653Z,1478851382.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:03.022Z,1478851383.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:03.054Z,1478851383.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:03.409Z,1478851383.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:03.426Z,1478851383.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:03.808Z,1478851383.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:03.826Z,1478851383.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:04.225Z,1478851384.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:04.245Z,1478851384.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:04.601Z,1478851384.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:04.649Z,1478851384.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:05.002Z,1478851385.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:05.045Z,1478851385.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:05.408Z,1478851385.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:05.439Z,1478851385.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:05.807Z,1478851385.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:05.822Z,1478851385.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:06.222Z,1478851386.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:06.242Z,1478851386.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:06.281Z,1478851386.281 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T07:58:06.1Z
2016-11-11T08:03:06.281Z,1478851386.281 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T08:03:06.281Z,1478851386.281 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T08:03:06.603Z,1478851386.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:06.642Z,1478851386.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:08.444Z,1478851388.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:08.484Z,1478851388.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:08.618Z,1478851388.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:08.674Z,1478851388.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:15.591Z,1478851395.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:15.632Z,1478851395.632 [BPC1](ERROR): Failed to receive battery data
2016-11-11T08:03:15.632Z,1478851395.632 [BPC1] Communications Fault, FailCount= 2
2016-11-11T08:03:15.632Z,1478851395.632 [BPC1](ERROR): Communications Fault
2016-11-11T08:03:15.645Z,1478851395.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:15.682Z,1478851395.682 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T08:03:15.697Z,1478851395.697 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0076.lzma
2016-11-11T08:03:15.750Z,1478851395.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:15.789Z,1478851395.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:16.112Z,1478851396.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:16.133Z,1478851396.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:16.493Z,1478851396.493 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0076.lzma.bak
2016-11-11T08:03:16.493Z,1478851396.493 [DataOverHttps](INFO): SBD MOMSN=4555194
2016-11-11T08:03:16.533Z,1478851396.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:16.567Z,1478851396.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:16.587Z,1478851396.587 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:03:16.587Z,1478851396.587 [BPC1] No Fault, FailCount= 2
2016-11-11T08:03:17.771Z,1478851397.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:17.851Z,1478851397.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:17.872Z,1478851397.872 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T08:03:17.872Z,1478851397.872 [Rowe_600LCM] No Fault, FailCount= 5
2016-11-11T08:03:17.950Z,1478851397.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:17.985Z,1478851397.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:18.067Z,1478851398.067 [Rowe_600LCM](INFO): Initializing
2016-11-11T08:03:18.068Z,1478851398.068 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T08:03:18.068Z,1478851398.068 [Rowe_600LCM](INFO): LCM OK
2016-11-11T08:03:18.068Z,1478851398.068 [Rowe_600LCM](INFO): Powering up
2016-11-11T08:03:21.213Z,1478851401.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:21.270Z,1478851401.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:21.362Z,1478851401.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:21.402Z,1478851401.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:21.733Z,1478851401.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:21.755Z,1478851401.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:22.153Z,1478851402.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:22.203Z,1478851402.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:22.331Z,1478851402.332 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T08:03:22.396Z,1478851402.396 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T08:03:22.397Z,1478851402.397 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T08:03:22.398Z,1478851402.398 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T08:03:22.399Z,1478851402.399 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T08:03:22.525Z,1478851402.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:22.562Z,1478851402.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:22.942Z,1478851402.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:22.966Z,1478851402.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:26.614Z,1478851406.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:26.630Z,1478851406.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:26.700Z,1478851406.700 [DataOverHttps](INFO): Sending 349 bytes from file Logs/20161111T044527/Express0077.lzma
2016-11-11T08:03:26.742Z,1478851406.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:26.762Z,1478851406.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:27.119Z,1478851407.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:27.142Z,1478851407.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:49.291Z,1478851429.291 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0077.lzma.bak
2016-11-11T08:03:49.291Z,1478851429.291 [DataOverHttps](INFO): SBD MOMSN=4555196
2016-11-11T08:03:49.305Z,1478851429.305 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T08:03:49.322Z,1478851429.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:49.343Z,1478851429.343 [BPC1](ERROR): Failed to receive battery data
2016-11-11T08:03:49.343Z,1478851429.343 [BPC1] Communications Fault, FailCount= 3
2016-11-11T08:03:49.343Z,1478851429.343 [BPC1](ERROR): Communications Fault
2016-11-11T08:03:49.396Z,1478851429.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:49.477Z,1478851429.477 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T08:03:50.976Z,1478851430.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:50.992Z,1478851430.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:51.021Z,1478851431.021 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T08:03:51.022Z,1478851431.022 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T08:03:51.022Z,1478851431.022 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T08:03:51.099Z,1478851431.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:51.140Z,1478851431.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:54.587Z,1478851434.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:54.603Z,1478851434.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:54.655Z,1478851434.655 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:03:54.655Z,1478851434.655 [BPC1] No Fault, FailCount= 3
2016-11-11T08:03:54.698Z,1478851434.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:54.846Z,1478851434.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:55.104Z,1478851435.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:55.121Z,1478851435.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:55.505Z,1478851435.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:55.556Z,1478851435.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:55.902Z,1478851435.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:55.918Z,1478851435.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:56.276Z,1478851436.276 [NAL9602](INFO): Powering down
2016-11-11T08:03:56.302Z,1478851436.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:56.337Z,1478851436.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:56.698Z,1478851436.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:56.733Z,1478851436.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:57.099Z,1478851437.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:57.114Z,1478851437.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:57.498Z,1478851437.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:57.513Z,1478851437.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:57.905Z,1478851437.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:57.920Z,1478851437.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:58.341Z,1478851438.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:58.365Z,1478851438.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:58.730Z,1478851438.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:58.754Z,1478851438.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:59.114Z,1478851439.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:59.142Z,1478851439.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:59.505Z,1478851439.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:59.533Z,1478851439.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:03:59.901Z,1478851439.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:03:59.945Z,1478851439.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:00.300Z,1478851440.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:00.344Z,1478851440.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:00.747Z,1478851440.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:00.783Z,1478851440.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:01.098Z,1478851441.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:01.121Z,1478851441.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:01.504Z,1478851441.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:01.533Z,1478851441.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:01.911Z,1478851441.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:01.926Z,1478851441.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:02.345Z,1478851442.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:02.421Z,1478851442.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:02.697Z,1478851442.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:02.722Z,1478851442.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:03.104Z,1478851443.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:03.138Z,1478851443.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:03.508Z,1478851443.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:03.533Z,1478851443.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:03.924Z,1478851443.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:03.951Z,1478851443.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:04.319Z,1478851444.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:04.374Z,1478851444.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:04.702Z,1478851444.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:04.721Z,1478851444.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:05.106Z,1478851445.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:05.129Z,1478851445.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:05.502Z,1478851445.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:05.521Z,1478851445.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:05.905Z,1478851445.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:05.965Z,1478851445.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:06.295Z,1478851446.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:06.381Z,1478851446.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:06.699Z,1478851446.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:06.726Z,1478851446.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:07.102Z,1478851447.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:07.117Z,1478851447.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:07.503Z,1478851447.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:07.554Z,1478851447.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:07.895Z,1478851447.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:07.930Z,1478851447.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:08.295Z,1478851448.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:08.385Z,1478851448.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:08.695Z,1478851448.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:08.746Z,1478851448.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:09.099Z,1478851449.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:09.115Z,1478851449.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:09.495Z,1478851449.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:09.517Z,1478851449.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:09.895Z,1478851449.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:09.910Z,1478851449.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:10.299Z,1478851450.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:10.314Z,1478851450.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:10.699Z,1478851450.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:10.729Z,1478851450.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:11.106Z,1478851451.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:11.122Z,1478851451.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:11.498Z,1478851451.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:11.521Z,1478851451.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:11.901Z,1478851451.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:11.929Z,1478851451.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:12.301Z,1478851452.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:12.320Z,1478851452.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:12.720Z,1478851452.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:12.762Z,1478851452.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:13.095Z,1478851453.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:13.129Z,1478851453.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:13.495Z,1478851453.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:13.529Z,1478851453.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:13.907Z,1478851453.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:13.969Z,1478851453.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:14.295Z,1478851454.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:14.322Z,1478851454.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:14.717Z,1478851454.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:14.749Z,1478851454.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:15.135Z,1478851455.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:15.150Z,1478851455.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:15.503Z,1478851455.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:15.522Z,1478851455.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:15.902Z,1478851455.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:15.929Z,1478851455.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:16.339Z,1478851456.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:16.393Z,1478851456.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:16.700Z,1478851456.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:16.729Z,1478851456.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:17.105Z,1478851457.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:17.132Z,1478851457.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:17.498Z,1478851457.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:17.521Z,1478851457.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:17.897Z,1478851457.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:17.929Z,1478851457.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:18.328Z,1478851458.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:18.376Z,1478851458.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:18.711Z,1478851458.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:18.742Z,1478851458.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:19.116Z,1478851459.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:19.166Z,1478851459.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:19.501Z,1478851459.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:19.516Z,1478851459.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:19.907Z,1478851459.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:19.947Z,1478851459.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:20.363Z,1478851460.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:20.413Z,1478851460.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:20.722Z,1478851460.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:20.777Z,1478851460.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:21.107Z,1478851461.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:21.122Z,1478851461.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:21.502Z,1478851461.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:21.553Z,1478851461.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:21.906Z,1478851461.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:21.956Z,1478851461.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:22.331Z,1478851462.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:22.377Z,1478851462.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:22.697Z,1478851462.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:22.735Z,1478851462.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:23.097Z,1478851463.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:23.139Z,1478851463.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:23.495Z,1478851463.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:23.510Z,1478851463.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:23.895Z,1478851463.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:23.943Z,1478851463.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:24.295Z,1478851464.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:24.359Z,1478851464.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:24.701Z,1478851464.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:24.720Z,1478851464.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:25.099Z,1478851465.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:25.121Z,1478851465.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:25.495Z,1478851465.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:25.517Z,1478851465.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:25.636Z,1478851465.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:25.892Z,1478851465.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:25.907Z,1478851465.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:26.295Z,1478851466.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:26.317Z,1478851466.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:26.432Z,1478851466.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:26.720Z,1478851466.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:26.741Z,1478851466.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:27.096Z,1478851467.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:27.117Z,1478851467.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:27.499Z,1478851467.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:27.514Z,1478851467.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:27.892Z,1478851467.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:27.960Z,1478851467.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:28.299Z,1478851468.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:28.315Z,1478851468.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:28.728Z,1478851468.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:28.744Z,1478851468.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:29.095Z,1478851469.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:29.118Z,1478851469.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:29.499Z,1478851469.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:29.515Z,1478851469.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:29.895Z,1478851469.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:29.911Z,1478851469.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:30.309Z,1478851470.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:30.328Z,1478851470.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:30.695Z,1478851470.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:30.711Z,1478851470.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:31.100Z,1478851471.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:31.115Z,1478851471.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:31.518Z,1478851471.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:31.533Z,1478851471.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:31.945Z,1478851471.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:31.969Z,1478851471.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:32.303Z,1478851472.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:32.350Z,1478851472.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:32.701Z,1478851472.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:32.741Z,1478851472.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:33.102Z,1478851473.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:33.145Z,1478851473.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:33.497Z,1478851473.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:33.517Z,1478851473.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:33.905Z,1478851473.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:33.925Z,1478851473.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:34.301Z,1478851474.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:34.353Z,1478851474.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:34.699Z,1478851474.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:34.714Z,1478851474.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:35.102Z,1478851475.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:35.142Z,1478851475.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:35.508Z,1478851475.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:35.557Z,1478851475.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:35.934Z,1478851475.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:35.958Z,1478851475.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:36.301Z,1478851476.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:36.318Z,1478851476.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:36.706Z,1478851476.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:36.721Z,1478851476.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:37.109Z,1478851477.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:37.129Z,1478851477.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:37.566Z,1478851477.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:37.599Z,1478851477.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:37.893Z,1478851477.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:37.915Z,1478851477.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:38.301Z,1478851478.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:38.323Z,1478851478.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:38.700Z,1478851478.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:38.715Z,1478851478.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:39.095Z,1478851479.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:39.110Z,1478851479.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:39.498Z,1478851479.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:39.517Z,1478851479.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:39.892Z,1478851479.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:39.907Z,1478851479.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:40.294Z,1478851480.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:40.312Z,1478851480.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:40.699Z,1478851480.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:40.714Z,1478851480.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:41.096Z,1478851481.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:41.111Z,1478851481.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:41.495Z,1478851481.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:41.510Z,1478851481.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:41.899Z,1478851481.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:41.915Z,1478851481.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:42.295Z,1478851482.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:42.310Z,1478851482.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:42.696Z,1478851482.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:42.712Z,1478851482.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:43.100Z,1478851483.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:43.132Z,1478851483.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:43.499Z,1478851483.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:43.515Z,1478851483.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:43.899Z,1478851483.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:43.915Z,1478851483.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:44.301Z,1478851484.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:44.316Z,1478851484.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:44.699Z,1478851484.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:44.714Z,1478851484.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:45.096Z,1478851485.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:45.129Z,1478851485.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:45.496Z,1478851485.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:45.525Z,1478851485.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:45.895Z,1478851485.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:45.910Z,1478851485.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:46.301Z,1478851486.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:46.389Z,1478851486.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:46.696Z,1478851486.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:46.720Z,1478851486.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:47.095Z,1478851487.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:47.137Z,1478851487.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:47.495Z,1478851487.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:47.510Z,1478851487.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:47.896Z,1478851487.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:47.941Z,1478851487.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:48.305Z,1478851488.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:48.349Z,1478851488.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:48.698Z,1478851488.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:48.726Z,1478851488.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:49.101Z,1478851489.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:49.133Z,1478851489.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:49.496Z,1478851489.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:49.525Z,1478851489.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:49.898Z,1478851489.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:49.925Z,1478851489.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:50.314Z,1478851490.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:50.354Z,1478851490.355 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:50.355Z,1478851490.355 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2016-11-11T08:04:50.355Z,1478851490.355 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:04:50.365Z,1478851490.365 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:50.365Z,1478851490.365 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 46
2016-11-11T08:04:50.365Z,1478851490.365 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:04:50.408Z,1478851490.408 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:04:50.409Z,1478851490.409 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:04:50.701Z,1478851490.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:50.749Z,1478851490.749 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:04:50.749Z,1478851490.749 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2016-11-11T08:04:50.750Z,1478851490.750 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:04:50.750Z,1478851490.750 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 46
2016-11-11T08:04:51.103Z,1478851491.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:51.117Z,1478851491.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:04:51.118Z,1478851491.118 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:04:51.118Z,1478851491.118 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:04:51.123Z,1478851491.123 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:04:51.123Z,1478851491.123 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:04:51.124Z,1478851491.124 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:04:51.508Z,1478851491.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:51.528Z,1478851491.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:55.119Z,1478851495.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:55.181Z,1478851495.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:55.192Z,1478851495.192 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:55.192Z,1478851495.193 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 46
2016-11-11T08:04:55.193Z,1478851495.193 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:04:55.216Z,1478851495.216 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:04:55.309Z,1478851495.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:55.405Z,1478851495.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:55.433Z,1478851495.434 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:04:55.434Z,1478851495.434 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 46
2016-11-11T08:04:55.645Z,1478851495.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:55.689Z,1478851495.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:55.695Z,1478851495.694 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:04:55.695Z,1478851495.695 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:04:55.695Z,1478851495.695 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:04:56.049Z,1478851496.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:56.085Z,1478851496.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:56.445Z,1478851496.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:56.481Z,1478851496.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:56.845Z,1478851496.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:56.869Z,1478851496.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:57.249Z,1478851497.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:57.281Z,1478851497.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:57.649Z,1478851497.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:57.681Z,1478851497.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:58.045Z,1478851498.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:58.070Z,1478851498.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:58.445Z,1478851498.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:58.478Z,1478851498.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:58.860Z,1478851498.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:58.881Z,1478851498.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:59.249Z,1478851499.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:59.301Z,1478851499.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:04:59.645Z,1478851499.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:04:59.681Z,1478851499.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:00.049Z,1478851500.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:00.081Z,1478851500.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:00.445Z,1478851500.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:00.501Z,1478851500.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:00.854Z,1478851500.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:00.880Z,1478851500.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:01.244Z,1478851501.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:01.293Z,1478851501.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:01.645Z,1478851501.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:01.690Z,1478851501.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:02.045Z,1478851502.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:02.081Z,1478851502.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:02.445Z,1478851502.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:02.485Z,1478851502.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:02.845Z,1478851502.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:02.865Z,1478851502.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:03.248Z,1478851503.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:03.269Z,1478851503.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:03.651Z,1478851503.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:03.667Z,1478851503.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:04.051Z,1478851504.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:04.073Z,1478851504.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:04.452Z,1478851504.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:04.467Z,1478851504.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:04.857Z,1478851504.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:04.872Z,1478851504.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:05.252Z,1478851505.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:05.266Z,1478851505.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:05.652Z,1478851505.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:05.678Z,1478851505.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:06.048Z,1478851506.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:06.071Z,1478851506.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:06.453Z,1478851506.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:06.473Z,1478851506.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:06.857Z,1478851506.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:06.885Z,1478851506.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:07.252Z,1478851507.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:07.275Z,1478851507.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:07.645Z,1478851507.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:07.679Z,1478851507.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:08.045Z,1478851508.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:08.070Z,1478851508.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:08.452Z,1478851508.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:08.475Z,1478851508.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:08.859Z,1478851508.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:08.879Z,1478851508.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:09.245Z,1478851509.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:09.270Z,1478851509.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:09.645Z,1478851509.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:09.681Z,1478851509.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:10.045Z,1478851510.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:10.077Z,1478851510.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:10.445Z,1478851510.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:10.481Z,1478851510.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:10.845Z,1478851510.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:10.878Z,1478851510.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:11.253Z,1478851511.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:11.278Z,1478851511.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:11.645Z,1478851511.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:11.677Z,1478851511.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:12.045Z,1478851512.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:12.078Z,1478851512.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:12.445Z,1478851512.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:12.512Z,1478851512.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:12.853Z,1478851512.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:12.880Z,1478851512.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:13.249Z,1478851513.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:13.275Z,1478851513.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:13.645Z,1478851513.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:13.705Z,1478851513.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:14.046Z,1478851514.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:14.061Z,1478851514.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:14.461Z,1478851514.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:14.491Z,1478851514.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:14.853Z,1478851514.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:14.905Z,1478851514.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:15.252Z,1478851515.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:15.266Z,1478851515.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:15.651Z,1478851515.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:15.702Z,1478851515.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:16.053Z,1478851516.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:16.106Z,1478851516.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:16.458Z,1478851516.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:16.472Z,1478851516.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:16.848Z,1478851516.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:16.864Z,1478851516.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:17.249Z,1478851517.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:17.270Z,1478851517.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:17.651Z,1478851517.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:17.674Z,1478851517.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:18.052Z,1478851518.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:18.067Z,1478851518.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:18.253Z,1478851518.253 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T08:05:18.253Z,1478851518.253 [Rowe_600LCM] Communications Fault, FailCount= 1
2016-11-11T08:05:18.253Z,1478851518.253 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T08:05:18.457Z,1478851518.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:18.478Z,1478851518.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T08:05:18.479Z,1478851518.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:18.512Z,1478851518.511 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T08:05:18.655Z,1478851518.655 [Rowe_600LCM](INFO): Powering down
2016-11-11T08:05:18.853Z,1478851518.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:18.867Z,1478851518.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T08:05:18.868Z,1478851518.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:19.245Z,1478851519.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:19.279Z,1478851519.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:05:19.280Z,1478851519.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:19.645Z,1478851519.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:19.678Z,1478851519.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:05:19.680Z,1478851519.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:20.045Z,1478851520.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:20.078Z,1478851520.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:05:20.079Z,1478851520.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:20.111Z,1478851520.111 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T08:05:20.112Z,1478851520.112 [Rowe_600LCM] No Fault, FailCount= 1
2016-11-11T08:05:20.271Z,1478851520.271 [Rowe_600LCM](INFO): Initializing
2016-11-11T08:05:20.272Z,1478851520.272 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T08:05:20.272Z,1478851520.272 [Rowe_600LCM](INFO): LCM OK
2016-11-11T08:05:20.272Z,1478851520.272 [Rowe_600LCM](INFO): Powering up
2016-11-11T08:05:20.445Z,1478851520.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:20.477Z,1478851520.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:05:20.478Z,1478851520.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:20.849Z,1478851520.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:20.883Z,1478851520.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:05:20.884Z,1478851520.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:21.252Z,1478851521.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:21.266Z,1478851521.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T08:05:21.267Z,1478851521.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:21.652Z,1478851521.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:21.675Z,1478851521.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T08:05:21.677Z,1478851521.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:22.051Z,1478851522.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:22.073Z,1478851522.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T08:05:22.074Z,1478851522.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:22.450Z,1478851522.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:22.464Z,1478851522.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T08:05:22.466Z,1478851522.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:22.848Z,1478851522.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:22.863Z,1478851522.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T08:05:22.864Z,1478851522.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:23.253Z,1478851523.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:23.272Z,1478851523.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T08:05:23.273Z,1478851523.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:23.651Z,1478851523.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:23.665Z,1478851523.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T08:05:23.667Z,1478851523.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:24.052Z,1478851524.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:24.067Z,1478851524.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T08:05:24.068Z,1478851524.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:24.405Z,1478851524.405 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T08:05:24.469Z,1478851524.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:24.510Z,1478851524.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T08:05:24.512Z,1478851524.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:24.582Z,1478851524.582 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T08:05:24.584Z,1478851524.584 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T08:05:24.585Z,1478851524.585 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T08:05:24.586Z,1478851524.586 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T08:05:24.851Z,1478851524.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:24.895Z,1478851524.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T08:05:24.896Z,1478851524.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:25.245Z,1478851525.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:25.290Z,1478851525.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:25.657Z,1478851525.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:25.672Z,1478851525.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:26.052Z,1478851526.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:26.068Z,1478851526.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:26.452Z,1478851526.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:26.513Z,1478851526.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:26.860Z,1478851526.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:26.881Z,1478851526.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:27.256Z,1478851527.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:27.271Z,1478851527.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:27.645Z,1478851527.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:27.678Z,1478851527.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:28.045Z,1478851528.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:28.098Z,1478851528.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:28.445Z,1478851528.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:28.488Z,1478851528.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:28.845Z,1478851528.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:28.882Z,1478851528.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:29.257Z,1478851529.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:29.306Z,1478851529.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:29.648Z,1478851529.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:29.663Z,1478851529.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:30.051Z,1478851530.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:30.097Z,1478851530.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:30.459Z,1478851530.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:30.509Z,1478851530.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:30.851Z,1478851530.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:30.878Z,1478851530.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:31.253Z,1478851531.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:31.269Z,1478851531.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:31.645Z,1478851531.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:31.679Z,1478851531.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:32.045Z,1478851532.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:32.070Z,1478851532.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:32.460Z,1478851532.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:32.476Z,1478851532.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:32.849Z,1478851532.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:32.881Z,1478851532.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:33.245Z,1478851533.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:33.272Z,1478851533.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:33.645Z,1478851533.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:33.661Z,1478851533.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:34.045Z,1478851534.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:34.065Z,1478851534.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:34.445Z,1478851534.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:34.465Z,1478851534.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:34.848Z,1478851534.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:34.864Z,1478851534.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:35.252Z,1478851535.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:35.268Z,1478851535.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:35.651Z,1478851535.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:35.666Z,1478851535.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:36.052Z,1478851536.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:36.067Z,1478851536.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:36.459Z,1478851536.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:36.475Z,1478851536.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:36.853Z,1478851536.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:36.873Z,1478851536.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:37.245Z,1478851537.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:37.278Z,1478851537.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:37.653Z,1478851537.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:37.675Z,1478851537.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:38.045Z,1478851538.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:38.078Z,1478851538.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:38.456Z,1478851538.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:38.479Z,1478851538.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:38.849Z,1478851538.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:38.874Z,1478851538.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:39.253Z,1478851539.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:39.268Z,1478851539.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:39.652Z,1478851539.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:39.668Z,1478851539.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:40.047Z,1478851540.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:40.082Z,1478851540.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:40.455Z,1478851540.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:40.471Z,1478851540.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:40.845Z,1478851540.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:40.881Z,1478851540.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:41.249Z,1478851541.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:41.321Z,1478851541.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:41.645Z,1478851541.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:41.689Z,1478851541.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:42.045Z,1478851542.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:42.060Z,1478851542.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:42.449Z,1478851542.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:42.485Z,1478851542.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:42.845Z,1478851542.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:42.901Z,1478851542.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:43.245Z,1478851543.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:43.272Z,1478851543.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:43.649Z,1478851543.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:43.685Z,1478851543.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:44.045Z,1478851544.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:44.105Z,1478851544.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:44.452Z,1478851544.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:44.467Z,1478851544.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:44.857Z,1478851544.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:44.909Z,1478851544.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:45.251Z,1478851545.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:45.301Z,1478851545.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:45.651Z,1478851545.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:45.666Z,1478851545.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:46.053Z,1478851546.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:46.068Z,1478851546.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:46.452Z,1478851546.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:46.473Z,1478851546.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:46.856Z,1478851546.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:46.871Z,1478851546.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:47.261Z,1478851547.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:47.276Z,1478851547.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:47.645Z,1478851547.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:47.678Z,1478851547.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:48.045Z,1478851548.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:48.081Z,1478851548.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:48.453Z,1478851548.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:48.478Z,1478851548.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:48.845Z,1478851548.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:48.881Z,1478851548.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:49.245Z,1478851549.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:49.272Z,1478851549.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:49.645Z,1478851549.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:49.681Z,1478851549.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:50.051Z,1478851550.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:50.066Z,1478851550.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:50.454Z,1478851550.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:50.469Z,1478851550.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:50.857Z,1478851550.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:50.879Z,1478851550.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:50.930Z,1478851550.930 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T08:05:51.253Z,1478851551.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:51.273Z,1478851551.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:51.654Z,1478851551.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:51.669Z,1478851551.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:55.282Z,1478851555.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:55.323Z,1478851555.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:55.414Z,1478851555.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:55.445Z,1478851555.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:55.777Z,1478851555.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:55.825Z,1478851555.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:56.179Z,1478851556.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:56.213Z,1478851556.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:56.581Z,1478851556.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:56.616Z,1478851556.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:56.973Z,1478851556.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:56.998Z,1478851556.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:57.373Z,1478851557.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:57.433Z,1478851557.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:57.781Z,1478851557.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:57.797Z,1478851557.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:58.204Z,1478851558.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:58.238Z,1478851558.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:58.573Z,1478851558.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:58.646Z,1478851558.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:58.973Z,1478851558.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:59.005Z,1478851559.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:59.373Z,1478851559.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:59.444Z,1478851559.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:05:59.773Z,1478851559.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:05:59.822Z,1478851559.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:00.188Z,1478851560.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:00.224Z,1478851560.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:00.577Z,1478851560.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:00.615Z,1478851560.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:00.973Z,1478851560.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:01.017Z,1478851561.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:01.373Z,1478851561.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:01.388Z,1478851561.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:01.773Z,1478851561.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:01.793Z,1478851561.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:02.190Z,1478851562.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:02.234Z,1478851562.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:02.580Z,1478851562.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:02.595Z,1478851562.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:02.976Z,1478851562.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:03.001Z,1478851563.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:03.380Z,1478851563.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:03.401Z,1478851563.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:03.779Z,1478851563.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:03.800Z,1478851563.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:04.189Z,1478851564.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:04.233Z,1478851564.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:04.573Z,1478851564.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:04.601Z,1478851564.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:04.973Z,1478851564.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:05.010Z,1478851565.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:05.373Z,1478851565.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:05.405Z,1478851565.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:05.773Z,1478851565.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:05.809Z,1478851565.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:05.808Z,1478851565.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:06.188Z,1478851566.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:06.241Z,1478851566.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:06.582Z,1478851566.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:06.602Z,1478851566.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:06.608Z,1478851566.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:06.981Z,1478851566.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:07.001Z,1478851567.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:07.016Z,1478851567.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:07.381Z,1478851567.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:07.396Z,1478851567.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:07.785Z,1478851567.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:07.805Z,1478851567.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:07.812Z,1478851567.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:08.180Z,1478851568.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:08.201Z,1478851568.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:08.573Z,1478851568.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:08.605Z,1478851568.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:08.608Z,1478851568.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:08.973Z,1478851568.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:09.005Z,1478851569.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:09.016Z,1478851569.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:09.373Z,1478851569.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:09.411Z,1478851569.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:09.773Z,1478851569.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:09.805Z,1478851569.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:09.812Z,1478851569.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:10.173Z,1478851570.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:10.210Z,1478851570.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:10.573Z,1478851570.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:10.604Z,1478851570.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:10.609Z,1478851570.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:10.973Z,1478851570.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:11.016Z,1478851571.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:11.026Z,1478851571.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:11.380Z,1478851571.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:11.395Z,1478851571.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:11.779Z,1478851571.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:11.812Z,1478851571.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:11.837Z,1478851571.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:12.184Z,1478851572.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:12.209Z,1478851572.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:12.580Z,1478851572.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:12.608Z,1478851572.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:12.641Z,1478851572.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:12.980Z,1478851572.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:13.001Z,1478851573.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:13.016Z,1478851573.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:13.373Z,1478851573.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:13.441Z,1478851573.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:13.773Z,1478851573.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:13.813Z,1478851573.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:13.820Z,1478851573.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:14.177Z,1478851574.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:14.209Z,1478851574.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:14.573Z,1478851574.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:14.601Z,1478851574.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:14.608Z,1478851574.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:14.973Z,1478851574.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:15.016Z,1478851575.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:15.018Z,1478851575.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:15.378Z,1478851575.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:15.393Z,1478851575.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:15.778Z,1478851575.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:15.793Z,1478851575.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:15.812Z,1478851575.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:16.183Z,1478851576.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:16.198Z,1478851576.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:16.579Z,1478851576.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:16.601Z,1478851576.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:16.608Z,1478851576.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:16.980Z,1478851576.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:16.996Z,1478851576.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:17.380Z,1478851577.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:17.401Z,1478851577.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:17.404Z,1478851577.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:17.780Z,1478851577.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:17.795Z,1478851577.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:18.183Z,1478851578.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:18.200Z,1478851578.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:18.216Z,1478851578.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:18.573Z,1478851578.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:18.606Z,1478851578.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:18.608Z,1478851578.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:18.973Z,1478851578.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:19.049Z,1478851579.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:19.374Z,1478851579.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:19.404Z,1478851579.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:19.407Z,1478851579.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:19.773Z,1478851579.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:19.807Z,1478851579.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:20.181Z,1478851580.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:20.201Z,1478851580.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:20.241Z,1478851580.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:20.577Z,1478851580.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:20.602Z,1478851580.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:20.668Z,1478851580.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:20.973Z,1478851580.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:21.009Z,1478851581.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:21.373Z,1478851581.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:21.408Z,1478851581.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:21.464Z,1478851581.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:21.773Z,1478851581.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:21.800Z,1478851581.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:22.173Z,1478851582.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:22.188Z,1478851582.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:22.260Z,1478851582.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:22.578Z,1478851582.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:22.605Z,1478851582.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:22.916Z,1478851582.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:22.982Z,1478851582.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:23.014Z,1478851583.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:23.380Z,1478851583.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:23.395Z,1478851583.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:23.712Z,1478851583.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:23.784Z,1478851583.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:23.800Z,1478851583.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:24.184Z,1478851584.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:24.201Z,1478851584.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:24.509Z,1478851584.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:24.586Z,1478851584.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:24.618Z,1478851584.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:24.936Z,1478851584.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:24.973Z,1478851584.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:25.009Z,1478851585.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:25.373Z,1478851585.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:25.400Z,1478851585.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:25.732Z,1478851585.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:25.777Z,1478851585.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:25.830Z,1478851585.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:26.183Z,1478851586.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:26.208Z,1478851586.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:26.528Z,1478851586.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:26.582Z,1478851586.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:26.614Z,1478851586.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:26.936Z,1478851586.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:26.986Z,1478851586.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:27.027Z,1478851587.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:27.379Z,1478851587.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:27.401Z,1478851587.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:27.732Z,1478851587.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:27.781Z,1478851587.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:27.829Z,1478851587.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:28.179Z,1478851588.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:28.229Z,1478851588.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:28.528Z,1478851588.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:28.582Z,1478851588.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:28.606Z,1478851588.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:28.936Z,1478851588.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:28.982Z,1478851588.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:28.998Z,1478851588.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:29.377Z,1478851589.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:29.401Z,1478851589.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:29.732Z,1478851589.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:29.786Z,1478851589.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:29.805Z,1478851589.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:30.180Z,1478851590.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:30.196Z,1478851590.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:30.528Z,1478851590.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:30.593Z,1478851590.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:30.617Z,1478851590.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:30.936Z,1478851590.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:30.973Z,1478851590.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:31.010Z,1478851591.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:31.373Z,1478851591.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:31.405Z,1478851591.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:31.733Z,1478851591.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:31.773Z,1478851591.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:31.808Z,1478851591.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:32.173Z,1478851592.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:32.205Z,1478851592.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:32.528Z,1478851592.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:32.576Z,1478851592.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:32.609Z,1478851592.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:32.936Z,1478851592.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:32.973Z,1478851592.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:33.006Z,1478851593.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:33.377Z,1478851593.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:33.402Z,1478851593.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:33.733Z,1478851593.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:33.773Z,1478851593.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:33.800Z,1478851593.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:34.181Z,1478851594.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:34.226Z,1478851594.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:34.528Z,1478851594.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:34.574Z,1478851594.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:34.609Z,1478851594.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:34.936Z,1478851594.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:34.973Z,1478851594.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:34.988Z,1478851594.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:35.373Z,1478851595.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:35.393Z,1478851595.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:35.732Z,1478851595.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:35.781Z,1478851595.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:35.817Z,1478851595.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:36.181Z,1478851596.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:36.196Z,1478851596.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:36.528Z,1478851596.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:36.594Z,1478851596.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:36.617Z,1478851596.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:36.936Z,1478851596.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:36.985Z,1478851596.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:37.009Z,1478851597.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:37.373Z,1478851597.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:37.408Z,1478851597.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:37.732Z,1478851597.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:37.773Z,1478851597.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:37.808Z,1478851597.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:38.184Z,1478851598.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:38.205Z,1478851598.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:38.528Z,1478851598.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:38.584Z,1478851598.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:38.607Z,1478851598.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:38.936Z,1478851598.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:38.973Z,1478851598.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:39.033Z,1478851599.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:39.381Z,1478851599.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:39.402Z,1478851599.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:39.732Z,1478851599.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:39.781Z,1478851599.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:39.796Z,1478851599.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:40.186Z,1478851600.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:40.209Z,1478851600.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:40.532Z,1478851600.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:40.576Z,1478851600.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:40.633Z,1478851600.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:40.973Z,1478851600.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:41.005Z,1478851601.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:41.331Z,1478851601.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:41.373Z,1478851601.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:41.405Z,1478851601.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:41.773Z,1478851601.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:41.827Z,1478851601.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:42.128Z,1478851602.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:42.192Z,1478851602.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:42.214Z,1478851602.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:42.540Z,1478851602.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:42.573Z,1478851602.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:42.618Z,1478851602.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:42.981Z,1478851602.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:43.037Z,1478851603.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:43.336Z,1478851603.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:43.373Z,1478851603.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:43.409Z,1478851603.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:43.773Z,1478851603.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:43.808Z,1478851603.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:44.132Z,1478851604.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:44.183Z,1478851604.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:44.218Z,1478851604.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:44.541Z,1478851604.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:44.574Z,1478851604.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:44.589Z,1478851604.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:44.974Z,1478851604.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:44.993Z,1478851604.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:45.336Z,1478851605.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:45.374Z,1478851605.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:45.393Z,1478851605.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:45.777Z,1478851605.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:45.792Z,1478851605.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:46.132Z,1478851606.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:46.187Z,1478851606.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:46.213Z,1478851606.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:46.540Z,1478851606.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:46.582Z,1478851606.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:46.605Z,1478851606.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:46.980Z,1478851606.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:46.996Z,1478851606.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:47.336Z,1478851607.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:47.382Z,1478851607.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:47.405Z,1478851607.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:47.781Z,1478851607.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:47.802Z,1478851607.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:48.133Z,1478851608.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:48.188Z,1478851608.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:48.221Z,1478851608.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:48.573Z,1478851608.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:48.606Z,1478851608.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:48.612Z,1478851608.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:48.973Z,1478851608.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:49.025Z,1478851609.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:49.375Z,1478851609.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:49.402Z,1478851609.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:49.408Z,1478851609.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:49.773Z,1478851609.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:49.817Z,1478851609.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:50.173Z,1478851610.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:50.204Z,1478851610.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:50.213Z,1478851610.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:50.589Z,1478851610.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:50.612Z,1478851610.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:50.872Z,1478851610.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:50.976Z,1478851610.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:51.001Z,1478851611.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:51.376Z,1478851611.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:51.406Z,1478851611.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:51.669Z,1478851611.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:51.776Z,1478851611.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:51.804Z,1478851611.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:52.465Z,1478851612.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:52.888Z,1478851612.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:53.684Z,1478851613.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:54.480Z,1478851614.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:54.888Z,1478851614.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:55.219Z,1478851615.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:55.269Z,1478851615.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:55.366Z,1478851615.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:55.401Z,1478851615.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:55.684Z,1478851615.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:55.761Z,1478851615.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:55.805Z,1478851615.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:56.161Z,1478851616.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:56.221Z,1478851616.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:56.480Z,1478851616.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:56.561Z,1478851616.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:56.601Z,1478851616.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:56.889Z,1478851616.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:56.966Z,1478851616.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:57.018Z,1478851617.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:57.368Z,1478851617.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:57.408Z,1478851617.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:57.684Z,1478851617.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:57.764Z,1478851617.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:57.780Z,1478851617.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:58.161Z,1478851618.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:58.176Z,1478851618.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:58.480Z,1478851618.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:58.569Z,1478851618.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:58.589Z,1478851618.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:58.888Z,1478851618.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:58.967Z,1478851618.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:58.982Z,1478851618.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:59.369Z,1478851619.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:59.384Z,1478851619.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:06:59.684Z,1478851619.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:59.768Z,1478851619.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:06:59.783Z,1478851619.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:00.168Z,1478851620.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:00.183Z,1478851620.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:00.480Z,1478851620.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:00.576Z,1478851620.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:00.591Z,1478851620.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:00.888Z,1478851620.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:00.968Z,1478851620.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:00.989Z,1478851620.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:01.368Z,1478851621.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:01.384Z,1478851621.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:01.684Z,1478851621.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:01.761Z,1478851621.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:01.794Z,1478851621.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:02.163Z,1478851622.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:02.186Z,1478851622.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:02.480Z,1478851622.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:02.569Z,1478851622.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:02.601Z,1478851622.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:02.888Z,1478851622.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:02.961Z,1478851622.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:03.007Z,1478851623.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:03.361Z,1478851623.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:03.397Z,1478851623.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:03.684Z,1478851623.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:03.761Z,1478851623.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:03.792Z,1478851623.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:04.161Z,1478851624.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:04.204Z,1478851624.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:04.482Z,1478851624.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:04.561Z,1478851624.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:04.601Z,1478851624.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:04.960Z,1478851624.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:04.981Z,1478851624.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:05.276Z,1478851625.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:05.368Z,1478851625.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:05.383Z,1478851625.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:05.684Z,1478851625.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:05.769Z,1478851625.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:05.784Z,1478851625.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:06.169Z,1478851626.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:06.184Z,1478851626.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:06.480Z,1478851626.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:06.567Z,1478851626.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:06.582Z,1478851626.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:06.888Z,1478851626.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:06.972Z,1478851626.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:06.987Z,1478851626.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:07.371Z,1478851627.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:07.386Z,1478851627.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:07.684Z,1478851627.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:07.769Z,1478851627.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:07.789Z,1478851627.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:08.168Z,1478851628.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:08.183Z,1478851628.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:08.480Z,1478851628.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:08.576Z,1478851628.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:08.592Z,1478851628.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:08.888Z,1478851628.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:08.968Z,1478851628.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:09.046Z,1478851629.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:09.365Z,1478851629.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:09.390Z,1478851629.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:09.684Z,1478851629.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:09.765Z,1478851629.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:09.821Z,1478851629.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:10.161Z,1478851630.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:10.176Z,1478851630.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:10.487Z,1478851630.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:10.565Z,1478851630.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:10.601Z,1478851630.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:10.965Z,1478851630.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:11.021Z,1478851631.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:11.284Z,1478851631.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:11.364Z,1478851631.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:11.385Z,1478851631.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:11.764Z,1478851631.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:11.809Z,1478851631.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:12.080Z,1478851632.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:12.173Z,1478851632.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:12.222Z,1478851632.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:12.488Z,1478851632.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:12.565Z,1478851632.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:12.580Z,1478851632.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:12.968Z,1478851632.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:12.983Z,1478851632.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:13.284Z,1478851633.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:13.368Z,1478851633.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:13.384Z,1478851633.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:13.768Z,1478851633.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:13.783Z,1478851633.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:14.080Z,1478851634.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:14.175Z,1478851634.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:14.191Z,1478851634.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:14.488Z,1478851634.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:14.564Z,1478851634.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:14.592Z,1478851634.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:14.968Z,1478851634.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:14.989Z,1478851634.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:15.285Z,1478851635.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:15.369Z,1478851635.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:15.389Z,1478851635.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:15.772Z,1478851635.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:15.787Z,1478851635.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:16.081Z,1478851636.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:16.162Z,1478851636.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:16.194Z,1478851636.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:16.532Z,1478851636.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:16.561Z,1478851636.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:16.596Z,1478851636.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:16.961Z,1478851636.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:16.993Z,1478851636.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:17.328Z,1478851637.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:17.361Z,1478851637.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:17.397Z,1478851637.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:17.761Z,1478851637.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:17.786Z,1478851637.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:18.124Z,1478851638.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:18.161Z,1478851638.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:18.193Z,1478851638.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:18.569Z,1478851638.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:18.595Z,1478851638.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:18.832Z,1478851638.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:18.961Z,1478851638.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:18.997Z,1478851638.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:19.362Z,1478851639.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:19.402Z,1478851639.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:19.628Z,1478851639.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:19.761Z,1478851639.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:19.794Z,1478851639.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:20.161Z,1478851640.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:20.206Z,1478851640.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:20.426Z,1478851640.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:20.431Z,1478851640.431 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T08:07:20.431Z,1478851640.431 [Rowe_600LCM] Communications Fault, FailCount= 2
2016-11-11T08:07:20.431Z,1478851640.431 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T08:07:20.561Z,1478851640.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:20.596Z,1478851640.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T08:07:20.597Z,1478851640.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:20.630Z,1478851640.630 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T08:07:20.835Z,1478851640.835 [Rowe_600LCM](INFO): Powering down
2016-11-11T08:07:20.962Z,1478851640.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:21.006Z,1478851641.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T08:07:21.032Z,1478851641.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:21.367Z,1478851641.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:21.396Z,1478851641.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:07:21.397Z,1478851641.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:21.643Z,1478851641.643 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2016-11-11T08:07:21.643Z,1478851641.644 [Rowe_600LCM] Hardware Fault, FailCount= 2
2016-11-11T08:07:21.644Z,1478851641.644 [Rowe_600LCM](ERROR): Hardware Fault
2016-11-11T08:07:21.770Z,1478851641.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:21.785Z,1478851641.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:07:21.786Z,1478851641.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:22.169Z,1478851642.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:22.183Z,1478851642.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:07:22.184Z,1478851642.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:22.228Z,1478851642.228 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T08:07:22.228Z,1478851642.228 [Rowe_600LCM] No Fault, FailCount= 2
2016-11-11T08:07:22.451Z,1478851642.451 [Rowe_600LCM](INFO): Initializing
2016-11-11T08:07:22.452Z,1478851642.452 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T08:07:22.452Z,1478851642.452 [Rowe_600LCM](INFO): LCM OK
2016-11-11T08:07:22.452Z,1478851642.452 [Rowe_600LCM](INFO): Powering up
2016-11-11T08:07:22.565Z,1478851642.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:22.587Z,1478851642.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:07:22.589Z,1478851642.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:22.973Z,1478851642.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:22.988Z,1478851642.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:07:22.989Z,1478851642.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:23.368Z,1478851643.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:23.383Z,1478851643.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T08:07:23.384Z,1478851643.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:23.768Z,1478851643.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:23.784Z,1478851643.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T08:07:23.785Z,1478851643.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:24.161Z,1478851644.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:24.232Z,1478851644.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T08:07:24.234Z,1478851644.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:24.561Z,1478851644.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:24.597Z,1478851644.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T08:07:24.598Z,1478851644.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:25.004Z,1478851645.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:25.045Z,1478851645.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T08:07:25.046Z,1478851645.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:25.361Z,1478851645.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:25.394Z,1478851645.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T08:07:25.395Z,1478851645.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:25.761Z,1478851645.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:25.805Z,1478851645.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T08:07:25.806Z,1478851645.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:26.161Z,1478851646.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:26.202Z,1478851646.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T08:07:26.204Z,1478851646.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:26.564Z,1478851646.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:26.606Z,1478851646.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T08:07:26.612Z,1478851646.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:26.713Z,1478851646.713 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T08:07:26.786Z,1478851646.786 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T08:07:26.792Z,1478851646.792 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T08:07:26.793Z,1478851646.793 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T08:07:26.795Z,1478851646.795 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T08:07:26.963Z,1478851646.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:26.982Z,1478851646.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T08:07:26.990Z,1478851646.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:27.377Z,1478851647.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:27.394Z,1478851647.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:27.774Z,1478851647.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:27.792Z,1478851647.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:28.168Z,1478851648.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:28.183Z,1478851648.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:28.569Z,1478851648.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:28.589Z,1478851648.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:28.972Z,1478851648.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:28.988Z,1478851648.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:29.361Z,1478851649.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:29.386Z,1478851649.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:29.761Z,1478851649.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:29.795Z,1478851649.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:30.161Z,1478851650.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:30.193Z,1478851650.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:30.561Z,1478851650.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:30.594Z,1478851650.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:30.961Z,1478851650.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:31.043Z,1478851651.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:31.361Z,1478851651.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:31.398Z,1478851651.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:31.769Z,1478851651.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:31.794Z,1478851651.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:32.161Z,1478851652.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:32.197Z,1478851652.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:32.561Z,1478851652.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:32.592Z,1478851652.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:32.961Z,1478851652.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:33.043Z,1478851653.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:33.375Z,1478851653.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:33.397Z,1478851653.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:33.768Z,1478851653.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:33.784Z,1478851653.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:34.173Z,1478851654.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:34.194Z,1478851654.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:34.561Z,1478851654.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:34.586Z,1478851654.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:35.016Z,1478851655.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:35.053Z,1478851655.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:35.365Z,1478851655.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:35.402Z,1478851655.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:35.761Z,1478851655.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:35.801Z,1478851655.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:36.168Z,1478851656.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:36.184Z,1478851656.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:36.572Z,1478851656.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:36.587Z,1478851656.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:36.982Z,1478851656.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:37.057Z,1478851657.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:37.373Z,1478851657.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:37.388Z,1478851657.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:37.768Z,1478851657.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:37.783Z,1478851657.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:38.168Z,1478851658.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:38.184Z,1478851658.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:38.568Z,1478851658.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:38.641Z,1478851658.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:39.009Z,1478851659.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:39.063Z,1478851659.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:39.373Z,1478851659.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:39.425Z,1478851659.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:39.767Z,1478851659.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:39.782Z,1478851659.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:40.169Z,1478851660.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:40.222Z,1478851660.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:40.569Z,1478851660.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:40.622Z,1478851660.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:40.969Z,1478851660.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:40.985Z,1478851660.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:41.376Z,1478851661.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:41.392Z,1478851661.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:41.761Z,1478851661.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:41.794Z,1478851661.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:42.161Z,1478851662.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:42.193Z,1478851662.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:42.561Z,1478851662.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:42.595Z,1478851662.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:42.961Z,1478851662.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:42.993Z,1478851662.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:43.405Z,1478851663.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:43.435Z,1478851663.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:43.761Z,1478851663.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:43.793Z,1478851663.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:44.161Z,1478851664.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:44.194Z,1478851664.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:44.561Z,1478851664.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:44.593Z,1478851664.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:44.965Z,1478851664.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:44.997Z,1478851664.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:45.376Z,1478851665.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:45.413Z,1478851665.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:45.761Z,1478851665.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:45.793Z,1478851665.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:46.161Z,1478851666.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:46.197Z,1478851666.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:46.561Z,1478851666.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:46.596Z,1478851666.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:46.995Z,1478851666.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:47.033Z,1478851667.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:47.361Z,1478851667.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:47.401Z,1478851667.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:47.761Z,1478851667.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:47.805Z,1478851667.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:48.161Z,1478851668.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:48.201Z,1478851668.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:48.561Z,1478851668.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:48.581Z,1478851668.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:49.025Z,1478851669.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:49.057Z,1478851669.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:49.370Z,1478851669.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:49.386Z,1478851669.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:49.769Z,1478851669.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:49.784Z,1478851669.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:50.164Z,1478851670.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:50.192Z,1478851670.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:50.568Z,1478851670.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:50.583Z,1478851670.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:51.021Z,1478851671.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:51.077Z,1478851671.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:51.364Z,1478851671.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:51.393Z,1478851671.393 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:51.393Z,1478851671.393 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2016-11-11T08:07:51.393Z,1478851671.393 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:07:51.408Z,1478851671.408 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:51.408Z,1478851671.408 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 47
2016-11-11T08:07:51.408Z,1478851671.408 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:07:51.436Z,1478851671.436 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:07:51.436Z,1478851671.436 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:07:51.768Z,1478851671.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:51.800Z,1478851671.800 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:07:51.801Z,1478851671.801 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2016-11-11T08:07:51.801Z,1478851671.801 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:07:51.801Z,1478851671.801 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 47
2016-11-11T08:07:52.170Z,1478851672.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:52.224Z,1478851672.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:07:52.224Z,1478851672.224 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:07:52.225Z,1478851672.225 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:07:52.234Z,1478851672.234 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:07:52.234Z,1478851672.234 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:07:52.234Z,1478851672.234 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:07:55.661Z,1478851675.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:55.706Z,1478851675.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:55.729Z,1478851675.730 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:55.730Z,1478851675.730 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 47
2016-11-11T08:07:55.730Z,1478851675.730 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:07:55.757Z,1478851675.757 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:07:55.808Z,1478851675.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:55.838Z,1478851675.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:55.873Z,1478851675.873 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:07:55.873Z,1478851675.873 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 47
2016-11-11T08:07:56.192Z,1478851676.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:56.239Z,1478851676.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:56.258Z,1478851676.258 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:07:56.259Z,1478851676.259 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:07:56.263Z,1478851676.263 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:07:56.585Z,1478851676.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:56.613Z,1478851676.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:56.989Z,1478851676.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:57.052Z,1478851677.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:57.386Z,1478851677.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:57.454Z,1478851677.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:57.785Z,1478851677.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:57.825Z,1478851677.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:58.187Z,1478851678.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:58.207Z,1478851678.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:58.595Z,1478851678.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:58.643Z,1478851678.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:58.994Z,1478851678.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:59.041Z,1478851679.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:59.395Z,1478851679.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:59.455Z,1478851679.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:07:59.790Z,1478851679.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:07:59.822Z,1478851679.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:00.187Z,1478851680.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:00.245Z,1478851680.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:00.587Z,1478851680.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:00.607Z,1478851680.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:01.005Z,1478851681.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:01.062Z,1478851681.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:01.398Z,1478851681.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:01.434Z,1478851681.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:01.788Z,1478851681.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:01.824Z,1478851681.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:02.186Z,1478851682.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:02.209Z,1478851682.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:02.591Z,1478851682.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:02.633Z,1478851682.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:03.001Z,1478851683.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:03.062Z,1478851683.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:03.387Z,1478851683.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:03.434Z,1478851683.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:03.785Z,1478851683.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:03.822Z,1478851683.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:04.193Z,1478851684.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:04.249Z,1478851684.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:04.587Z,1478851684.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:04.628Z,1478851684.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:04.991Z,1478851684.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:05.038Z,1478851685.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:05.410Z,1478851685.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:05.434Z,1478851685.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:05.804Z,1478851685.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:05.829Z,1478851685.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:06.206Z,1478851686.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:06.237Z,1478851686.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:06.594Z,1478851686.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:06.609Z,1478851686.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:07.009Z,1478851687.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:07.062Z,1478851687.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:07.392Z,1478851687.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:07.424Z,1478851687.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:07.786Z,1478851687.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:07.811Z,1478851687.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:08.200Z,1478851688.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:08.215Z,1478851688.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:08.585Z,1478851688.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:08.619Z,1478851688.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:09.042Z,1478851689.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:09.076Z,1478851689.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:09.394Z,1478851689.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:09.450Z,1478851689.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:09.785Z,1478851689.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:09.833Z,1478851689.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:10.192Z,1478851690.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:10.207Z,1478851690.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:10.597Z,1478851690.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:10.649Z,1478851690.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:10.985Z,1478851690.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:11.018Z,1478851691.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:11.412Z,1478851691.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:11.469Z,1478851691.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:11.787Z,1478851691.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:11.850Z,1478851691.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:12.186Z,1478851692.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:12.240Z,1478851692.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:12.587Z,1478851692.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:12.623Z,1478851692.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:12.985Z,1478851692.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:13.029Z,1478851693.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:13.387Z,1478851693.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:13.432Z,1478851693.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:13.794Z,1478851693.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:13.815Z,1478851693.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:14.193Z,1478851694.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:14.243Z,1478851694.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:14.595Z,1478851694.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:14.642Z,1478851694.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:15.000Z,1478851695.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:15.050Z,1478851695.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:15.387Z,1478851695.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:15.426Z,1478851695.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:15.787Z,1478851695.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:15.829Z,1478851695.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:16.187Z,1478851696.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:16.229Z,1478851696.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:16.587Z,1478851696.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:16.639Z,1478851696.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:17.006Z,1478851697.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:17.038Z,1478851697.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:17.394Z,1478851697.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:17.414Z,1478851697.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:17.786Z,1478851697.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:17.825Z,1478851697.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:18.188Z,1478851698.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:18.233Z,1478851698.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:18.587Z,1478851698.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:18.640Z,1478851698.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:18.986Z,1478851698.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:19.014Z,1478851699.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:19.401Z,1478851699.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:19.421Z,1478851699.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:19.785Z,1478851699.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:19.800Z,1478851699.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:20.189Z,1478851700.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:20.209Z,1478851700.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:20.589Z,1478851700.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:20.609Z,1478851700.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:20.987Z,1478851700.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:21.018Z,1478851701.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:21.386Z,1478851701.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:21.401Z,1478851701.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:21.789Z,1478851701.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:21.804Z,1478851701.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:22.185Z,1478851702.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:22.205Z,1478851702.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:22.589Z,1478851702.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:22.609Z,1478851702.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:23.009Z,1478851703.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:23.030Z,1478851703.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:23.389Z,1478851703.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:23.426Z,1478851703.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:23.788Z,1478851703.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:23.809Z,1478851703.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:24.189Z,1478851704.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:24.223Z,1478851704.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:24.585Z,1478851704.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:24.609Z,1478851704.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:24.985Z,1478851704.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:25.005Z,1478851705.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:25.389Z,1478851705.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:25.430Z,1478851705.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:25.784Z,1478851705.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:25.800Z,1478851705.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:26.189Z,1478851706.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:26.237Z,1478851706.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:26.585Z,1478851706.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:26.633Z,1478851706.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:26.989Z,1478851706.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:27.005Z,1478851707.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:27.386Z,1478851707.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:27.406Z,1478851707.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:27.789Z,1478851707.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:27.804Z,1478851707.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:28.226Z,1478851708.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:28.242Z,1478851708.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:28.589Z,1478851708.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:28.609Z,1478851708.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:28.989Z,1478851708.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:29.005Z,1478851709.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:29.385Z,1478851709.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:29.400Z,1478851709.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:29.790Z,1478851709.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:29.809Z,1478851709.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:30.185Z,1478851710.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:30.200Z,1478851710.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:30.590Z,1478851710.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:30.605Z,1478851710.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:30.989Z,1478851710.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:31.005Z,1478851711.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:31.390Z,1478851711.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:31.405Z,1478851711.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:31.785Z,1478851711.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:31.801Z,1478851711.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:32.190Z,1478851712.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:32.205Z,1478851712.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:32.585Z,1478851712.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:32.600Z,1478851712.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:32.990Z,1478851712.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:33.005Z,1478851713.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:33.401Z,1478851713.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:33.417Z,1478851713.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:33.786Z,1478851713.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:33.801Z,1478851713.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:34.189Z,1478851714.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:34.232Z,1478851714.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:34.589Z,1478851714.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:34.609Z,1478851714.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:34.989Z,1478851714.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:35.004Z,1478851715.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:35.390Z,1478851715.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:35.406Z,1478851715.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:35.789Z,1478851715.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:35.809Z,1478851715.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:36.186Z,1478851716.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:36.202Z,1478851716.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:36.589Z,1478851716.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:36.605Z,1478851716.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:36.992Z,1478851716.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:37.011Z,1478851717.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:37.385Z,1478851717.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:37.405Z,1478851717.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:37.790Z,1478851717.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:37.809Z,1478851717.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:38.188Z,1478851718.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:38.209Z,1478851718.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:38.589Z,1478851718.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:38.629Z,1478851718.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:38.985Z,1478851718.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:39.025Z,1478851719.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:39.386Z,1478851719.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:39.401Z,1478851719.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:39.785Z,1478851719.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:39.805Z,1478851719.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:40.190Z,1478851720.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:40.237Z,1478851720.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:40.586Z,1478851720.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:40.601Z,1478851720.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:40.990Z,1478851720.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:41.039Z,1478851721.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:41.390Z,1478851721.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:41.437Z,1478851721.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:41.785Z,1478851721.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:41.801Z,1478851721.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:42.202Z,1478851722.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:42.217Z,1478851722.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:42.586Z,1478851722.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:42.603Z,1478851722.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:42.989Z,1478851722.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:43.005Z,1478851723.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:43.389Z,1478851723.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:43.407Z,1478851723.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:43.782Z,1478851723.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:43.797Z,1478851723.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:44.185Z,1478851724.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:44.205Z,1478851724.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:44.589Z,1478851724.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:44.604Z,1478851724.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:44.992Z,1478851724.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:45.032Z,1478851725.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:45.392Z,1478851725.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:45.413Z,1478851725.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:45.804Z,1478851725.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:45.831Z,1478851725.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:46.185Z,1478851726.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:46.223Z,1478851726.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:46.585Z,1478851726.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:46.618Z,1478851726.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:46.985Z,1478851726.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:47.019Z,1478851727.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:47.385Z,1478851727.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:47.405Z,1478851727.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:47.785Z,1478851727.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:47.816Z,1478851727.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:48.185Z,1478851728.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:48.210Z,1478851728.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:48.585Z,1478851728.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:48.609Z,1478851728.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:48.985Z,1478851728.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:49.014Z,1478851729.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:49.386Z,1478851729.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:49.420Z,1478851729.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:49.785Z,1478851729.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:49.816Z,1478851729.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:50.185Z,1478851730.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:50.213Z,1478851730.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:50.586Z,1478851730.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:50.605Z,1478851730.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:51.007Z,1478851731.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:51.040Z,1478851731.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:51.385Z,1478851731.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:51.417Z,1478851731.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:51.437Z,1478851731.437 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T08:08:51.437Z,1478851731.437 [Default:CheckIn:C.Wait] Stopped
2016-11-11T08:08:51.438Z,1478851731.438 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T08:08:51.438Z,1478851731.438 [Default:CheckIn:D] Running Loop=1
2016-11-11T08:08:51.785Z,1478851731.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:51.829Z,1478851731.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:51.838Z,1478851731.838 [Default:CheckIn:D] Stopped
2016-11-11T08:08:51.838Z,1478851731.838 [Default:CheckIn:E] Running Loop=1
2016-11-11T08:08:52.185Z,1478851732.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:52.201Z,1478851732.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:52.233Z,1478851732.233 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 198.842122 min 
2016-11-11T08:08:52.233Z,1478851732.233 [Default:CheckIn:E] Stopped
2016-11-11T08:08:52.233Z,1478851732.233 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T08:08:52.233Z,1478851732.233 [Default:CheckIn] Stopped
2016-11-11T08:08:52.233Z,1478851732.233 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T08:08:52.233Z,1478851732.233 [Default:CheckIn](INFO): Running loop #20
2016-11-11T08:08:52.233Z,1478851732.233 [Default:CheckIn] Running Loop=20
2016-11-11T08:08:52.234Z,1478851732.234 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T08:08:52.234Z,1478851732.234 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T08:08:55.941Z,1478851735.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:56.029Z,1478851736.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:56.104Z,1478851736.104 [NAL9602](INFO): Powering up
2016-11-11T08:08:56.122Z,1478851736.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:56.174Z,1478851736.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:56.509Z,1478851736.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:56.529Z,1478851736.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:56.921Z,1478851736.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:56.968Z,1478851736.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:57.309Z,1478851737.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:57.324Z,1478851737.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:57.693Z,1478851737.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:57.745Z,1478851737.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:58.093Z,1478851738.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:58.145Z,1478851738.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:58.493Z,1478851738.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:58.521Z,1478851738.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:58.900Z,1478851738.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:58.932Z,1478851738.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:59.298Z,1478851739.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:59.324Z,1478851739.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:08:59.699Z,1478851739.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:08:59.715Z,1478851739.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:00.101Z,1478851740.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:00.116Z,1478851740.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:00.501Z,1478851740.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:00.516Z,1478851740.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:00.905Z,1478851740.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:00.945Z,1478851740.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:01.296Z,1478851741.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:01.328Z,1478851741.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:01.693Z,1478851741.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:01.732Z,1478851741.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:02.093Z,1478851742.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:02.121Z,1478851742.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:02.497Z,1478851742.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:02.538Z,1478851742.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:02.909Z,1478851742.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:02.934Z,1478851742.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:03.299Z,1478851743.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:03.318Z,1478851743.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:03.697Z,1478851743.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:03.733Z,1478851743.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:04.100Z,1478851744.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:04.115Z,1478851744.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:04.501Z,1478851744.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:04.517Z,1478851744.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:04.950Z,1478851744.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:04.987Z,1478851744.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:05.293Z,1478851745.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:05.317Z,1478851745.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:05.705Z,1478851745.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:05.721Z,1478851745.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:06.095Z,1478851746.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:06.127Z,1478851746.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:06.505Z,1478851746.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:06.520Z,1478851746.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:06.912Z,1478851746.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:06.928Z,1478851746.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:07.277Z,1478851747.277 [NAL9602](INFO): NAL9602 initialized
2016-11-11T08:09:07.293Z,1478851747.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:07.324Z,1478851747.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:07.693Z,1478851747.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:07.725Z,1478851747.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:08.077Z,1478851748.077 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T08:09:08.077Z,1478851748.077 [NAL9602] Data Fault, FailCount= 5
2016-11-11T08:09:08.077Z,1478851748.077 [NAL9602](ERROR): Data Fault
2016-11-11T08:09:08.094Z,1478851748.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:08.133Z,1478851748.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:08.170Z,1478851748.170 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T08:09:08.171Z,1478851748.171 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-11-11T08:09:08.485Z,1478851748.485 [NAL9602](INFO): Powering down
2016-11-11T08:09:08.502Z,1478851748.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:08.534Z,1478851748.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:08.897Z,1478851748.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:08.920Z,1478851748.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:09.309Z,1478851749.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:09.324Z,1478851749.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:09.704Z,1478851749.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:09.720Z,1478851749.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:10.100Z,1478851750.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:10.141Z,1478851750.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:10.493Z,1478851750.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:10.549Z,1478851750.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:10.897Z,1478851750.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:10.933Z,1478851750.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:11.298Z,1478851751.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:11.322Z,1478851751.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:11.692Z,1478851751.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:11.738Z,1478851751.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:12.093Z,1478851752.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:12.129Z,1478851752.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:12.498Z,1478851752.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:12.538Z,1478851752.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:12.902Z,1478851752.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:12.947Z,1478851752.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:13.297Z,1478851753.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:13.325Z,1478851753.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:13.705Z,1478851753.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:13.720Z,1478851753.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:14.096Z,1478851754.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:14.112Z,1478851754.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:14.501Z,1478851754.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:14.526Z,1478851754.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:14.894Z,1478851754.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:14.925Z,1478851754.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:15.301Z,1478851755.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:15.316Z,1478851755.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:15.700Z,1478851755.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:15.715Z,1478851755.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:16.100Z,1478851756.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:16.121Z,1478851756.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:16.499Z,1478851756.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:16.515Z,1478851756.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:16.898Z,1478851756.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:16.922Z,1478851756.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:17.292Z,1478851757.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:17.313Z,1478851757.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:17.692Z,1478851757.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:17.708Z,1478851757.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:18.092Z,1478851758.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:18.113Z,1478851758.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:18.500Z,1478851758.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:18.521Z,1478851758.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:18.938Z,1478851758.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:19.000Z,1478851759.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:19.298Z,1478851759.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:19.321Z,1478851759.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:19.699Z,1478851759.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:19.714Z,1478851759.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:20.105Z,1478851760.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:20.120Z,1478851760.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:20.500Z,1478851760.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:20.521Z,1478851760.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:20.892Z,1478851760.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:20.921Z,1478851760.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:21.293Z,1478851761.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:21.325Z,1478851761.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:21.692Z,1478851761.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:21.733Z,1478851761.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:22.093Z,1478851762.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:22.136Z,1478851762.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:22.493Z,1478851762.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:22.534Z,1478851762.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:22.787Z,1478851762.787 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T08:09:22.787Z,1478851762.787 [Rowe_600LCM] Communications Fault, FailCount= 3
2016-11-11T08:09:22.787Z,1478851762.787 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T08:09:22.893Z,1478851762.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:22.907Z,1478851762.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T08:09:22.908Z,1478851762.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:22.959Z,1478851762.959 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T08:09:23.192Z,1478851763.192 [Rowe_600LCM](INFO): Powering down
2016-11-11T08:09:23.292Z,1478851763.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:23.313Z,1478851763.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T08:09:23.314Z,1478851763.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:23.696Z,1478851763.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:23.711Z,1478851763.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:09:23.712Z,1478851763.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:24.100Z,1478851764.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:24.114Z,1478851764.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:09:24.115Z,1478851764.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:24.498Z,1478851764.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:24.513Z,1478851764.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:09:24.514Z,1478851764.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:24.563Z,1478851764.563 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T08:09:24.564Z,1478851764.564 [Rowe_600LCM] No Fault, FailCount= 3
2016-11-11T08:09:24.807Z,1478851764.807 [Rowe_600LCM](INFO): Initializing
2016-11-11T08:09:24.808Z,1478851764.808 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T08:09:24.808Z,1478851764.808 [Rowe_600LCM](INFO): LCM OK
2016-11-11T08:09:24.808Z,1478851764.808 [Rowe_600LCM](INFO): Powering up
2016-11-11T08:09:24.900Z,1478851764.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:24.993Z,1478851764.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2016-11-11T08:09:24.994Z,1478851764.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:25.292Z,1478851765.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:25.326Z,1478851765.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:09:25.327Z,1478851765.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:25.692Z,1478851765.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:25.712Z,1478851765.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T08:09:25.714Z,1478851765.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:26.093Z,1478851766.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:26.151Z,1478851766.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T08:09:26.153Z,1478851766.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:26.492Z,1478851766.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:26.512Z,1478851766.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T08:09:26.513Z,1478851766.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:26.897Z,1478851766.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:26.948Z,1478851766.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T08:09:26.950Z,1478851766.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:27.296Z,1478851767.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:27.342Z,1478851767.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T08:09:27.344Z,1478851767.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:27.692Z,1478851767.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:27.712Z,1478851767.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T08:09:27.714Z,1478851767.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:28.096Z,1478851768.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:28.111Z,1478851768.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T08:09:28.112Z,1478851768.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:28.498Z,1478851768.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:28.517Z,1478851768.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T08:09:28.518Z,1478851768.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:28.902Z,1478851768.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:28.952Z,1478851768.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T08:09:28.954Z,1478851768.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:29.078Z,1478851769.078 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T08:09:29.146Z,1478851769.146 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T08:09:29.148Z,1478851769.148 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T08:09:29.149Z,1478851769.149 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T08:09:29.150Z,1478851769.150 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T08:09:29.295Z,1478851769.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:29.338Z,1478851769.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T08:09:29.340Z,1478851769.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:29.692Z,1478851769.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:29.709Z,1478851769.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:30.097Z,1478851770.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:30.133Z,1478851770.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:30.500Z,1478851770.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:30.515Z,1478851770.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:30.899Z,1478851770.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:30.915Z,1478851770.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:31.299Z,1478851771.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:31.314Z,1478851771.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:31.704Z,1478851771.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:31.719Z,1478851771.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:32.093Z,1478851772.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:32.125Z,1478851772.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:32.492Z,1478851772.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:32.526Z,1478851772.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:32.900Z,1478851772.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:32.923Z,1478851772.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:33.300Z,1478851773.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:33.324Z,1478851773.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:33.692Z,1478851773.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:33.726Z,1478851773.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:34.097Z,1478851774.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:34.129Z,1478851774.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:34.493Z,1478851774.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:34.525Z,1478851774.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:34.893Z,1478851774.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:34.928Z,1478851774.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:35.293Z,1478851775.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:35.329Z,1478851775.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:35.696Z,1478851775.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:35.725Z,1478851775.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:36.109Z,1478851776.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:36.196Z,1478851776.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:36.504Z,1478851776.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:36.538Z,1478851776.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:36.898Z,1478851776.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:36.913Z,1478851776.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:37.298Z,1478851777.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:37.312Z,1478851777.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:37.698Z,1478851777.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:37.713Z,1478851777.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:38.101Z,1478851778.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:38.116Z,1478851778.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:38.500Z,1478851778.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:38.515Z,1478851778.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:38.906Z,1478851778.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:38.922Z,1478851778.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:39.295Z,1478851779.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:39.373Z,1478851779.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:39.692Z,1478851779.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:39.728Z,1478851779.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:40.093Z,1478851780.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:40.147Z,1478851780.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:40.493Z,1478851780.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:40.525Z,1478851780.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:40.905Z,1478851780.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:40.978Z,1478851780.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:41.304Z,1478851781.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:41.365Z,1478851781.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:41.700Z,1478851781.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:41.751Z,1478851781.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:42.099Z,1478851782.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:42.114Z,1478851782.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:42.504Z,1478851782.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:42.524Z,1478851782.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:42.900Z,1478851782.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:42.916Z,1478851782.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:43.292Z,1478851783.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:43.326Z,1478851783.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:43.700Z,1478851783.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:43.726Z,1478851783.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:44.097Z,1478851784.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:44.130Z,1478851784.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:44.492Z,1478851784.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:44.522Z,1478851784.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:44.908Z,1478851784.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:44.935Z,1478851784.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:45.292Z,1478851785.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:45.336Z,1478851785.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:45.692Z,1478851785.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:45.728Z,1478851785.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:46.101Z,1478851786.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:46.145Z,1478851786.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:46.493Z,1478851786.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:46.513Z,1478851786.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:46.896Z,1478851786.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:46.911Z,1478851786.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:47.301Z,1478851787.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:47.320Z,1478851787.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:47.699Z,1478851787.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:47.714Z,1478851787.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:48.098Z,1478851788.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:48.135Z,1478851788.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:48.496Z,1478851788.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:48.523Z,1478851788.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:48.907Z,1478851788.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:48.938Z,1478851788.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:49.293Z,1478851789.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:49.325Z,1478851789.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:49.693Z,1478851789.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:49.718Z,1478851789.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:50.097Z,1478851790.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:50.130Z,1478851790.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:50.493Z,1478851790.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:50.534Z,1478851790.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:50.894Z,1478851790.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:50.924Z,1478851790.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:51.301Z,1478851791.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:51.331Z,1478851791.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:51.694Z,1478851791.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:51.743Z,1478851791.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:52.104Z,1478851792.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:52.120Z,1478851792.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:52.495Z,1478851792.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:52.543Z,1478851792.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:55.914Z,1478851795.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:55.997Z,1478851795.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:56.098Z,1478851796.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:56.129Z,1478851796.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:56.464Z,1478851796.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:56.479Z,1478851796.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:56.865Z,1478851796.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:56.898Z,1478851796.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:57.279Z,1478851797.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:57.327Z,1478851797.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:57.663Z,1478851797.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:57.691Z,1478851797.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:58.064Z,1478851798.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:58.106Z,1478851798.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:58.457Z,1478851798.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:58.522Z,1478851798.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:58.856Z,1478851798.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:58.881Z,1478851798.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:59.257Z,1478851799.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:59.293Z,1478851799.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:09:59.657Z,1478851799.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:09:59.689Z,1478851799.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:00.057Z,1478851800.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:00.096Z,1478851800.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:00.456Z,1478851800.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:00.495Z,1478851800.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:00.857Z,1478851800.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:00.888Z,1478851800.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:01.262Z,1478851801.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:01.286Z,1478851801.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:01.660Z,1478851801.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:01.674Z,1478851801.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:02.062Z,1478851802.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:02.080Z,1478851802.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:02.464Z,1478851802.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:02.485Z,1478851802.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:02.872Z,1478851802.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:02.919Z,1478851802.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:03.263Z,1478851803.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:03.296Z,1478851803.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:03.664Z,1478851803.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:03.685Z,1478851803.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:04.064Z,1478851804.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:04.080Z,1478851804.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:04.465Z,1478851804.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:04.481Z,1478851804.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:04.856Z,1478851804.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:04.893Z,1478851804.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:05.276Z,1478851805.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:05.297Z,1478851805.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:05.668Z,1478851805.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:05.683Z,1478851805.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:06.056Z,1478851806.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:06.101Z,1478851806.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:06.456Z,1478851806.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:06.496Z,1478851806.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:06.856Z,1478851806.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:06.881Z,1478851806.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:07.265Z,1478851807.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:07.297Z,1478851807.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:07.657Z,1478851807.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:07.701Z,1478851807.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:08.057Z,1478851808.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:08.074Z,1478851808.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:08.457Z,1478851808.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:08.481Z,1478851808.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:08.857Z,1478851808.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:08.882Z,1478851808.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:09.256Z,1478851809.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:09.293Z,1478851809.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:09.657Z,1478851809.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:09.693Z,1478851809.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:10.056Z,1478851810.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:10.083Z,1478851810.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:10.464Z,1478851810.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:10.541Z,1478851810.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:10.857Z,1478851810.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:10.886Z,1478851810.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:11.257Z,1478851811.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:11.306Z,1478851811.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:11.661Z,1478851811.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:11.686Z,1478851811.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:12.056Z,1478851812.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:12.105Z,1478851812.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:12.461Z,1478851812.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:12.514Z,1478851812.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:12.858Z,1478851812.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:12.913Z,1478851812.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:13.262Z,1478851813.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:13.277Z,1478851813.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:13.660Z,1478851813.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:13.675Z,1478851813.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:14.068Z,1478851814.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:14.088Z,1478851814.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:14.464Z,1478851814.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:14.481Z,1478851814.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:14.873Z,1478851814.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:14.913Z,1478851814.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:15.267Z,1478851815.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:15.286Z,1478851815.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:15.663Z,1478851815.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:15.682Z,1478851815.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:16.069Z,1478851816.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:16.085Z,1478851816.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:16.464Z,1478851816.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:16.500Z,1478851816.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:16.869Z,1478851816.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:16.906Z,1478851816.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:17.257Z,1478851817.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:17.295Z,1478851817.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:17.676Z,1478851817.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:17.691Z,1478851817.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:18.057Z,1478851818.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:18.093Z,1478851818.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:18.457Z,1478851818.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:18.492Z,1478851818.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:18.861Z,1478851818.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:18.894Z,1478851818.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:19.258Z,1478851819.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:19.291Z,1478851819.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:19.656Z,1478851819.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:19.699Z,1478851819.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:20.065Z,1478851820.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:20.084Z,1478851820.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:20.466Z,1478851820.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:20.483Z,1478851820.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:20.866Z,1478851820.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:20.881Z,1478851820.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:21.269Z,1478851821.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:21.317Z,1478851821.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:21.665Z,1478851821.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:21.695Z,1478851821.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:22.061Z,1478851822.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:22.086Z,1478851822.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:22.460Z,1478851822.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:22.494Z,1478851822.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:22.872Z,1478851822.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:22.905Z,1478851822.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:23.257Z,1478851823.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:23.297Z,1478851823.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:23.663Z,1478851823.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:23.678Z,1478851823.678 [PNI_TCM](ERROR): CRC does not match. Expected:0x7224 got:0x16963
2016-11-11T08:10:23.698Z,1478851823.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:24.071Z,1478851824.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:24.087Z,1478851824.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:24.456Z,1478851824.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:24.549Z,1478851824.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:24.858Z,1478851824.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:24.893Z,1478851824.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:25.268Z,1478851825.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:25.313Z,1478851825.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:25.665Z,1478851825.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:25.692Z,1478851825.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:26.063Z,1478851826.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:26.121Z,1478851826.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:26.461Z,1478851826.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:26.518Z,1478851826.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:26.865Z,1478851826.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:26.880Z,1478851826.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:27.269Z,1478851827.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:27.289Z,1478851827.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:27.659Z,1478851827.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:27.705Z,1478851827.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:28.064Z,1478851828.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:28.087Z,1478851828.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.383100 seconds old.
2016-11-11T08:10:28.089Z,1478851828.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:28.090Z,1478851828.089 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.383500 seconds old.
2016-11-11T08:10:28.092Z,1478851828.092 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.383400 seconds old.
2016-11-11T08:10:28.094Z,1478851828.094 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.383900 seconds old.
2016-11-11T08:10:28.096Z,1478851828.096 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.380000 seconds old.
2016-11-11T08:10:28.465Z,1478851828.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:28.479Z,1478851828.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.774400 seconds old.
2016-11-11T08:10:28.481Z,1478851828.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:28.482Z,1478851828.482 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.775900 seconds old.
2016-11-11T08:10:28.484Z,1478851828.484 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.775900 seconds old.
2016-11-11T08:10:28.487Z,1478851828.487 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.776300 seconds old.
2016-11-11T08:10:28.488Z,1478851828.488 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.772600 seconds old.
2016-11-11T08:10:28.875Z,1478851828.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:28.903Z,1478851828.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.199100 seconds old.
2016-11-11T08:10:28.905Z,1478851828.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:28.906Z,1478851828.906 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.199600 seconds old.
2016-11-11T08:10:28.941Z,1478851828.941 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.232700 seconds old.
2016-11-11T08:10:28.944Z,1478851828.944 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.233500 seconds old.
2016-11-11T08:10:28.945Z,1478851828.945 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.229600 seconds old.
2016-11-11T08:10:29.274Z,1478851829.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:29.290Z,1478851829.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.585400 seconds old.
2016-11-11T08:10:29.291Z,1478851829.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:29.292Z,1478851829.292 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.586000 seconds old.
2016-11-11T08:10:29.295Z,1478851829.295 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.586000 seconds old.
2016-11-11T08:10:29.297Z,1478851829.297 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.586700 seconds old.
2016-11-11T08:10:29.299Z,1478851829.299 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.582800 seconds old.
2016-11-11T08:10:29.657Z,1478851829.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:29.694Z,1478851829.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.989700 seconds old.
2016-11-11T08:10:29.695Z,1478851829.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:29.696Z,1478851829.696 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.990300 seconds old.
2016-11-11T08:10:29.699Z,1478851829.699 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.990200 seconds old.
2016-11-11T08:10:29.701Z,1478851829.701 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.990800 seconds old.
2016-11-11T08:10:29.703Z,1478851829.703 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.986900 seconds old.
2016-11-11T08:10:30.059Z,1478851830.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:30.090Z,1478851830.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.386100 seconds old.
2016-11-11T08:10:30.092Z,1478851830.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:30.093Z,1478851830.093 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.386600 seconds old.
2016-11-11T08:10:30.096Z,1478851830.096 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 2.386500 seconds old.
2016-11-11T08:10:30.098Z,1478851830.098 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.387700 seconds old.
2016-11-11T08:10:30.100Z,1478851830.099 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 2.383800 seconds old.
2016-11-11T08:10:30.458Z,1478851830.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:30.490Z,1478851830.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.786100 seconds old.
2016-11-11T08:10:30.492Z,1478851830.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:30.493Z,1478851830.493 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.786600 seconds old.
2016-11-11T08:10:30.495Z,1478851830.495 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 2.786400 seconds old.
2016-11-11T08:10:30.497Z,1478851830.497 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.786900 seconds old.
2016-11-11T08:10:30.499Z,1478851830.499 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 2.783000 seconds old.
2016-11-11T08:10:30.857Z,1478851830.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:30.886Z,1478851830.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.181400 seconds old.
2016-11-11T08:10:30.887Z,1478851830.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:30.888Z,1478851830.888 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.182100 seconds old.
2016-11-11T08:10:30.890Z,1478851830.890 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 3.181900 seconds old.
2016-11-11T08:10:30.893Z,1478851830.893 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.182500 seconds old.
2016-11-11T08:10:30.894Z,1478851830.894 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 3.178600 seconds old.
2016-11-11T08:10:31.258Z,1478851831.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:31.292Z,1478851831.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:31.659Z,1478851831.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:31.703Z,1478851831.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:32.058Z,1478851832.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:32.073Z,1478851832.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:32.456Z,1478851832.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:32.499Z,1478851832.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:32.859Z,1478851832.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:32.866Z,1478851832.866 [PNI_TCM](ERROR): CRC does not match. Expected:0x53 got:0x16829
2016-11-11T08:10:32.899Z,1478851832.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:33.272Z,1478851833.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:33.287Z,1478851833.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:33.667Z,1478851833.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:33.682Z,1478851833.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:34.065Z,1478851834.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:34.082Z,1478851834.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:34.465Z,1478851834.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:34.485Z,1478851834.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:34.869Z,1478851834.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:34.884Z,1478851834.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:35.257Z,1478851835.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:35.289Z,1478851835.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:35.657Z,1478851835.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:35.695Z,1478851835.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:36.059Z,1478851836.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:36.088Z,1478851836.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:36.458Z,1478851836.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:36.492Z,1478851836.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:36.857Z,1478851836.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:36.889Z,1478851836.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:37.267Z,1478851837.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:37.296Z,1478851837.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:37.659Z,1478851837.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:37.692Z,1478851837.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:38.061Z,1478851838.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:38.086Z,1478851838.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:38.461Z,1478851838.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:38.557Z,1478851838.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:38.858Z,1478851838.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:38.874Z,1478851838.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:39.266Z,1478851839.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:39.334Z,1478851839.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:39.661Z,1478851839.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:39.697Z,1478851839.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:40.056Z,1478851840.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:40.106Z,1478851840.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:40.459Z,1478851840.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:40.509Z,1478851840.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:40.859Z,1478851840.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:40.896Z,1478851840.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:41.265Z,1478851841.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:41.297Z,1478851841.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:41.657Z,1478851841.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:41.697Z,1478851841.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:42.059Z,1478851842.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:42.074Z,1478851842.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:42.459Z,1478851842.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:42.481Z,1478851842.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:42.862Z,1478851842.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:42.877Z,1478851842.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:43.264Z,1478851843.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:43.285Z,1478851843.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:43.667Z,1478851843.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:43.682Z,1478851843.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:44.064Z,1478851844.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:44.079Z,1478851844.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:44.463Z,1478851844.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:44.477Z,1478851844.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:44.863Z,1478851844.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:44.878Z,1478851844.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:45.274Z,1478851845.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:45.298Z,1478851845.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:45.657Z,1478851845.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:45.682Z,1478851845.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:46.056Z,1478851846.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:46.090Z,1478851846.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:46.344Z,1478851846.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:46.456Z,1478851846.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:46.489Z,1478851846.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:46.859Z,1478851846.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:46.897Z,1478851846.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:47.140Z,1478851847.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:47.257Z,1478851847.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:47.293Z,1478851847.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:47.548Z,1478851847.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:47.657Z,1478851847.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:47.693Z,1478851847.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:48.056Z,1478851848.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:48.093Z,1478851848.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:48.344Z,1478851848.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:48.459Z,1478851848.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:48.492Z,1478851848.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:48.856Z,1478851848.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:48.888Z,1478851848.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:49.140Z,1478851849.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:49.257Z,1478851849.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:49.293Z,1478851849.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:49.548Z,1478851849.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:49.660Z,1478851849.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:49.675Z,1478851849.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:50.061Z,1478851850.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:50.076Z,1478851850.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:50.344Z,1478851850.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:50.462Z,1478851850.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:50.477Z,1478851850.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:50.865Z,1478851850.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:50.880Z,1478851850.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:51.136Z,1478851851.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:51.259Z,1478851851.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:51.278Z,1478851851.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:51.664Z,1478851851.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:51.680Z,1478851851.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:51.932Z,1478851851.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:52.059Z,1478851852.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:52.085Z,1478851852.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:52.464Z,1478851852.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:52.537Z,1478851852.537 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:52.538Z,1478851852.537 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2016-11-11T08:10:52.538Z,1478851852.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:10:52.548Z,1478851852.548 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:52.549Z,1478851852.549 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 48
2016-11-11T08:10:52.549Z,1478851852.549 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:10:52.570Z,1478851852.570 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:10:52.571Z,1478851852.571 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:10:52.728Z,1478851852.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:52.868Z,1478851852.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:52.925Z,1478851852.925 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:10:52.926Z,1478851852.926 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2016-11-11T08:10:52.926Z,1478851852.926 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:10:52.926Z,1478851852.926 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 48
2016-11-11T08:10:53.148Z,1478851853.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:53.944Z,1478851853.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:54.741Z,1478851854.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:55.148Z,1478851855.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:55.944Z,1478851855.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:56.210Z,1478851856.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:56.260Z,1478851856.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:10:56.261Z,1478851856.261 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:10:56.261Z,1478851856.261 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:10:56.266Z,1478851856.266 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:10:56.266Z,1478851856.266 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:10:56.266Z,1478851856.266 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:10:56.268Z,1478851856.268 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:56.268Z,1478851856.268 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 48
2016-11-11T08:10:56.268Z,1478851856.268 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:10:56.310Z,1478851856.310 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:10:56.362Z,1478851856.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:56.410Z,1478851856.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:56.456Z,1478851856.456 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:10:56.456Z,1478851856.456 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 48
2016-11-11T08:10:56.740Z,1478851856.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:56.763Z,1478851856.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:56.802Z,1478851856.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:56.808Z,1478851856.808 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:10:56.809Z,1478851856.809 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:10:56.809Z,1478851856.809 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:10:57.148Z,1478851857.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:57.161Z,1478851857.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:57.217Z,1478851857.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:57.555Z,1478851857.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:57.574Z,1478851857.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:57.945Z,1478851857.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:57.958Z,1478851857.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:57.976Z,1478851857.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:58.349Z,1478851858.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:58.377Z,1478851858.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:58.741Z,1478851858.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:58.764Z,1478851858.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:58.820Z,1478851858.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:59.153Z,1478851859.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:59.170Z,1478851859.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:59.256Z,1478851859.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:59.548Z,1478851859.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:59.567Z,1478851859.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:10:59.952Z,1478851859.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:10:59.970Z,1478851859.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:00.052Z,1478851860.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:00.356Z,1478851860.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:00.374Z,1478851860.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:00.755Z,1478851860.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:00.776Z,1478851860.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:00.848Z,1478851860.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:01.155Z,1478851861.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:01.203Z,1478851861.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:01.480Z,1478851861.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:01.567Z,1478851861.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:01.594Z,1478851861.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:01.964Z,1478851861.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:01.979Z,1478851861.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:02.276Z,1478851862.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:02.349Z,1478851862.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:02.380Z,1478851862.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:02.748Z,1478851862.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:02.793Z,1478851862.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:03.073Z,1478851863.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:03.148Z,1478851863.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:03.185Z,1478851863.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:03.480Z,1478851863.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:03.554Z,1478851863.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:03.580Z,1478851863.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:03.948Z,1478851863.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:03.967Z,1478851863.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:04.276Z,1478851864.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:04.352Z,1478851864.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:04.376Z,1478851864.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:04.754Z,1478851864.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:04.780Z,1478851864.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:05.072Z,1478851865.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:05.184Z,1478851865.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:05.228Z,1478851865.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:05.480Z,1478851865.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:05.552Z,1478851865.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:05.582Z,1478851865.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:05.969Z,1478851865.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:05.985Z,1478851865.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:06.276Z,1478851866.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:06.349Z,1478851866.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:06.393Z,1478851866.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:06.748Z,1478851866.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:06.809Z,1478851866.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:07.072Z,1478851867.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:07.168Z,1478851867.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:07.188Z,1478851867.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:07.480Z,1478851867.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:07.549Z,1478851867.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:07.586Z,1478851867.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:07.974Z,1478851867.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:07.989Z,1478851867.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:08.276Z,1478851868.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:08.349Z,1478851868.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:08.378Z,1478851868.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:08.402Z,1478851868.402 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T08:11:08.402Z,1478851868.402 [NAL9602] No Fault, FailCount= 5
2016-11-11T08:11:08.733Z,1478851868.733 [NAL9602](INFO): Powering up NAL9602
2016-11-11T08:11:08.750Z,1478851868.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:08.789Z,1478851868.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:09.072Z,1478851869.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:09.157Z,1478851869.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:09.223Z,1478851869.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:09.480Z,1478851869.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:09.549Z,1478851869.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:09.587Z,1478851869.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:09.952Z,1478851869.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:09.996Z,1478851869.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:10.276Z,1478851870.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:10.355Z,1478851870.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:10.402Z,1478851870.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:10.766Z,1478851870.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:10.790Z,1478851870.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:11.074Z,1478851871.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:11.158Z,1478851871.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:11.205Z,1478851871.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:11.480Z,1478851871.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:11.554Z,1478851871.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:11.606Z,1478851871.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:11.956Z,1478851871.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:11.981Z,1478851871.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:12.276Z,1478851872.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:12.356Z,1478851872.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:12.373Z,1478851872.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:12.763Z,1478851872.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:12.816Z,1478851872.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:13.072Z,1478851873.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:13.165Z,1478851873.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:13.199Z,1478851873.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:13.480Z,1478851873.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:13.549Z,1478851873.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:13.589Z,1478851873.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:13.957Z,1478851873.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:13.982Z,1478851873.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:14.276Z,1478851874.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:14.349Z,1478851874.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:14.387Z,1478851874.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:14.753Z,1478851874.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:14.784Z,1478851874.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:15.072Z,1478851875.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:15.162Z,1478851875.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:15.195Z,1478851875.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:15.480Z,1478851875.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:15.549Z,1478851875.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:15.583Z,1478851875.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:15.949Z,1478851875.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:15.983Z,1478851875.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:16.276Z,1478851876.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:16.349Z,1478851876.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:16.378Z,1478851876.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:16.749Z,1478851876.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:16.776Z,1478851876.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:17.073Z,1478851877.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:17.149Z,1478851877.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:17.177Z,1478851877.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:17.480Z,1478851877.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:17.556Z,1478851877.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:17.601Z,1478851877.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:17.952Z,1478851877.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:18.004Z,1478851878.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:18.276Z,1478851878.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:18.365Z,1478851878.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:18.414Z,1478851878.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:18.756Z,1478851878.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:18.797Z,1478851878.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:19.072Z,1478851879.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:19.157Z,1478851879.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:19.183Z,1478851879.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:19.480Z,1478851879.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:19.570Z,1478851879.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:19.600Z,1478851879.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:19.944Z,1478851879.944 [NAL9602](INFO): NAL9602 initialized
2016-11-11T08:11:19.965Z,1478851879.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:19.982Z,1478851879.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:20.276Z,1478851880.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:20.352Z,1478851880.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:20.379Z,1478851880.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:20.780Z,1478851880.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:20.798Z,1478851880.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:21.072Z,1478851881.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:21.183Z,1478851881.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:21.211Z,1478851881.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:21.480Z,1478851881.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:21.604Z,1478851881.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:21.636Z,1478851881.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:21.950Z,1478851881.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:21.982Z,1478851881.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:22.276Z,1478851882.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:22.350Z,1478851882.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:22.394Z,1478851882.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:22.785Z,1478851882.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:22.803Z,1478851882.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:23.076Z,1478851883.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:23.175Z,1478851883.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:23.207Z,1478851883.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:23.553Z,1478851883.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:23.581Z,1478851883.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:23.872Z,1478851883.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:23.958Z,1478851883.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:24.037Z,1478851884.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:24.370Z,1478851884.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:24.393Z,1478851884.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:24.669Z,1478851884.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:24.772Z,1478851884.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:24.815Z,1478851884.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:25.076Z,1478851885.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:25.149Z,1478851885.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:25.195Z,1478851885.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:25.467Z,1478851885.467 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T08:11:25.467Z,1478851885.467 [Rowe_600LCM] Communications Fault, FailCount= 4
2016-11-11T08:11:25.467Z,1478851885.467 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T08:11:25.555Z,1478851885.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:25.609Z,1478851885.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T08:11:25.610Z,1478851885.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:25.645Z,1478851885.645 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T08:11:25.871Z,1478851885.871 [Rowe_600LCM](INFO): Powering down
2016-11-11T08:11:25.949Z,1478851885.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:25.984Z,1478851885.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T08:11:25.986Z,1478851885.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:26.351Z,1478851886.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:26.413Z,1478851886.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:11:26.414Z,1478851886.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:26.679Z,1478851886.680 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2016-11-11T08:11:26.680Z,1478851886.680 [Rowe_600LCM] Hardware Fault, FailCount= 4
2016-11-11T08:11:26.680Z,1478851886.680 [Rowe_600LCM](ERROR): Hardware Fault
2016-11-11T08:11:26.754Z,1478851886.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:26.800Z,1478851886.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:11:26.801Z,1478851886.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:27.156Z,1478851887.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:27.181Z,1478851887.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:11:27.182Z,1478851887.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:27.229Z,1478851887.229 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T08:11:27.229Z,1478851887.229 [Rowe_600LCM] No Fault, FailCount= 4
2016-11-11T08:11:27.487Z,1478851887.487 [Rowe_600LCM](INFO): Initializing
2016-11-11T08:11:27.488Z,1478851887.488 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T08:11:27.488Z,1478851887.488 [Rowe_600LCM](INFO): LCM OK
2016-11-11T08:11:27.488Z,1478851887.488 [Rowe_600LCM](INFO): Powering up
2016-11-11T08:11:27.577Z,1478851887.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:27.609Z,1478851887.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:11:27.610Z,1478851887.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:27.959Z,1478851887.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:27.976Z,1478851887.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:11:27.977Z,1478851887.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:28.355Z,1478851888.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:28.401Z,1478851888.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T08:11:28.403Z,1478851888.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:28.757Z,1478851888.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:28.778Z,1478851888.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T08:11:28.779Z,1478851888.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:29.165Z,1478851889.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:29.180Z,1478851889.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T08:11:29.181Z,1478851889.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:29.566Z,1478851889.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:29.623Z,1478851889.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T08:11:29.624Z,1478851889.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:29.950Z,1478851889.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:29.997Z,1478851889.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T08:11:29.998Z,1478851889.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:30.349Z,1478851890.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:30.382Z,1478851890.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T08:11:30.387Z,1478851890.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:30.749Z,1478851890.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:30.788Z,1478851890.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T08:11:30.789Z,1478851890.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:31.175Z,1478851891.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:31.193Z,1478851891.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T08:11:31.195Z,1478851891.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:31.608Z,1478851891.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:31.641Z,1478851891.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T08:11:31.643Z,1478851891.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:31.747Z,1478851891.747 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T08:11:31.830Z,1478851891.830 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T08:11:31.831Z,1478851891.832 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T08:11:31.833Z,1478851891.833 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T08:11:31.834Z,1478851891.833 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T08:11:31.952Z,1478851891.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:31.994Z,1478851891.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T08:11:31.996Z,1478851891.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:32.352Z,1478851892.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:32.381Z,1478851892.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:32.768Z,1478851892.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:32.792Z,1478851892.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:33.153Z,1478851893.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:33.193Z,1478851893.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:33.550Z,1478851893.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:33.586Z,1478851893.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:33.968Z,1478851893.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:34.000Z,1478851894.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:34.357Z,1478851894.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:34.417Z,1478851894.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:34.759Z,1478851894.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:34.810Z,1478851894.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:35.153Z,1478851895.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:35.197Z,1478851895.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:35.570Z,1478851895.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:35.586Z,1478851895.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:35.973Z,1478851895.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:35.998Z,1478851895.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:36.350Z,1478851896.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:36.398Z,1478851896.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:36.750Z,1478851896.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:36.770Z,1478851896.770 [PNI_TCM](ERROR): CRC does not match. Expected:0x37184 got:0x27420
2016-11-11T08:11:36.791Z,1478851896.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:37.152Z,1478851897.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:37.202Z,1478851897.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:37.557Z,1478851897.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:37.600Z,1478851897.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:37.953Z,1478851897.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:38.017Z,1478851898.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:38.369Z,1478851898.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:38.445Z,1478851898.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:38.757Z,1478851898.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:38.814Z,1478851898.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:39.157Z,1478851899.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:39.228Z,1478851899.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:39.550Z,1478851899.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:39.606Z,1478851899.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:39.950Z,1478851899.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:40.002Z,1478851900.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:40.358Z,1478851900.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:40.418Z,1478851900.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:40.755Z,1478851900.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:40.792Z,1478851900.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:41.152Z,1478851901.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:41.188Z,1478851901.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:41.564Z,1478851901.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:41.570Z,1478851901.570 [PNI_TCM](ERROR): CRC does not match. Expected:0x6978 got:0x1857
2016-11-11T08:11:41.645Z,1478851901.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:41.962Z,1478851901.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:41.981Z,1478851901.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:42.357Z,1478851902.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:42.391Z,1478851902.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:42.749Z,1478851902.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:42.781Z,1478851902.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:43.152Z,1478851903.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:43.159Z,1478851903.158 [PNI_TCM](ERROR): CRC does not match. Expected:0x8564 got:0x46038
2016-11-11T08:11:43.190Z,1478851903.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:43.552Z,1478851903.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:43.630Z,1478851903.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:43.966Z,1478851903.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:43.994Z,1478851903.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:44.368Z,1478851904.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:44.390Z,1478851904.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:44.754Z,1478851904.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:44.780Z,1478851904.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:45.158Z,1478851905.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:45.176Z,1478851905.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:45.557Z,1478851905.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:45.603Z,1478851905.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:45.964Z,1478851905.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:45.996Z,1478851905.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:46.351Z,1478851906.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:46.383Z,1478851906.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:46.762Z,1478851906.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:46.781Z,1478851906.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:47.149Z,1478851907.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:47.185Z,1478851907.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:47.550Z,1478851907.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:47.629Z,1478851907.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:47.968Z,1478851907.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:48.003Z,1478851908.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:48.370Z,1478851908.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:48.395Z,1478851908.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:48.770Z,1478851908.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:48.801Z,1478851908.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:49.158Z,1478851909.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:49.184Z,1478851909.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:49.556Z,1478851909.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:49.634Z,1478851909.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:49.967Z,1478851909.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:49.982Z,1478851909.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:50.368Z,1478851910.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:50.384Z,1478851910.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:50.752Z,1478851910.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:50.829Z,1478851910.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:51.169Z,1478851911.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:51.205Z,1478851911.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:51.553Z,1478851911.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:51.573Z,1478851911.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:51.975Z,1478851911.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:51.991Z,1478851911.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:52.351Z,1478851912.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:52.430Z,1478851912.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:52.766Z,1478851912.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:52.809Z,1478851912.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:53.171Z,1478851913.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:53.206Z,1478851913.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:56.748Z,1478851916.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:56.791Z,1478851916.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:56.904Z,1478851916.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:56.944Z,1478851916.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:57.250Z,1478851917.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:57.297Z,1478851917.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:57.662Z,1478851917.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:57.710Z,1478851917.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:58.057Z,1478851918.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:58.081Z,1478851918.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:58.462Z,1478851918.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:58.478Z,1478851918.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:58.862Z,1478851918.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:58.881Z,1478851918.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:59.242Z,1478851919.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:59.270Z,1478851919.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:11:59.648Z,1478851919.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:11:59.678Z,1478851919.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:00.047Z,1478851920.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:00.085Z,1478851920.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:00.442Z,1478851920.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:00.470Z,1478851920.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:00.841Z,1478851920.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:00.885Z,1478851920.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:01.242Z,1478851921.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:01.285Z,1478851921.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:01.649Z,1478851921.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:01.687Z,1478851921.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:02.049Z,1478851922.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:02.069Z,1478851922.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:02.449Z,1478851922.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:02.464Z,1478851922.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:02.856Z,1478851922.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:02.872Z,1478851922.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:03.256Z,1478851923.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:03.271Z,1478851923.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:03.654Z,1478851923.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:03.670Z,1478851923.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:04.044Z,1478851924.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:04.077Z,1478851924.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:04.441Z,1478851924.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:04.473Z,1478851924.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:04.841Z,1478851924.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:04.873Z,1478851924.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:05.241Z,1478851925.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:05.273Z,1478851925.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:05.678Z,1478851925.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:05.733Z,1478851925.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:06.056Z,1478851926.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:06.086Z,1478851926.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:06.442Z,1478851926.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:06.461Z,1478851926.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:06.842Z,1478851926.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:06.885Z,1478851926.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:07.250Z,1478851927.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:07.264Z,1478851927.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:07.645Z,1478851927.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:07.661Z,1478851927.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:08.048Z,1478851928.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:08.064Z,1478851928.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:08.449Z,1478851928.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:08.482Z,1478851928.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:08.844Z,1478851928.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:08.876Z,1478851928.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:09.257Z,1478851929.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:09.272Z,1478851929.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:09.641Z,1478851929.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:09.667Z,1478851929.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:10.041Z,1478851930.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:10.093Z,1478851930.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:10.457Z,1478851930.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:10.477Z,1478851930.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:10.846Z,1478851930.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:10.898Z,1478851930.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:11.241Z,1478851931.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:11.277Z,1478851931.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:11.647Z,1478851931.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:11.715Z,1478851931.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:12.042Z,1478851932.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:12.089Z,1478851932.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:12.441Z,1478851932.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:12.461Z,1478851932.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:12.845Z,1478851932.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:12.860Z,1478851932.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:13.250Z,1478851933.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:13.264Z,1478851933.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:13.646Z,1478851933.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:13.665Z,1478851933.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:14.049Z,1478851934.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:14.069Z,1478851934.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:14.455Z,1478851934.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:14.477Z,1478851934.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:14.853Z,1478851934.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:14.876Z,1478851934.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:15.255Z,1478851935.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:15.277Z,1478851935.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:15.649Z,1478851935.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:15.664Z,1478851935.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:16.053Z,1478851936.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:16.074Z,1478851936.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:16.456Z,1478851936.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:16.472Z,1478851936.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:16.841Z,1478851936.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:16.876Z,1478851936.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:17.241Z,1478851937.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:17.273Z,1478851937.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:17.641Z,1478851937.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:17.666Z,1478851937.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:18.054Z,1478851938.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:18.077Z,1478851938.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:18.460Z,1478851938.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:18.488Z,1478851938.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:18.856Z,1478851938.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:18.882Z,1478851938.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:19.242Z,1478851939.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:19.274Z,1478851939.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:19.660Z,1478851939.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:19.689Z,1478851939.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:20.042Z,1478851940.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:20.069Z,1478851940.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:20.441Z,1478851940.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:20.461Z,1478851940.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:20.848Z,1478851940.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:20.863Z,1478851940.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:21.251Z,1478851941.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:21.278Z,1478851941.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:21.651Z,1478851941.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:21.666Z,1478851941.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:22.058Z,1478851942.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:22.074Z,1478851942.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:22.450Z,1478851942.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:22.474Z,1478851942.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:22.865Z,1478851942.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:22.945Z,1478851942.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:23.253Z,1478851943.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:23.280Z,1478851943.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:23.664Z,1478851943.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:23.684Z,1478851943.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:24.066Z,1478851944.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:24.082Z,1478851944.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:24.442Z,1478851944.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:24.488Z,1478851944.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:24.841Z,1478851944.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:24.861Z,1478851944.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:25.241Z,1478851945.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:25.294Z,1478851945.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:25.641Z,1478851945.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:25.661Z,1478851945.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:26.046Z,1478851946.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:26.094Z,1478851946.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:26.445Z,1478851946.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:26.495Z,1478851946.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:26.845Z,1478851946.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:26.869Z,1478851946.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:27.248Z,1478851947.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:27.269Z,1478851947.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:27.659Z,1478851947.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:27.722Z,1478851947.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:28.054Z,1478851948.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:28.085Z,1478851948.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:28.463Z,1478851948.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:28.479Z,1478851948.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:28.863Z,1478851948.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:28.878Z,1478851948.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:29.241Z,1478851949.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:29.273Z,1478851949.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:29.656Z,1478851949.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:29.677Z,1478851949.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:30.045Z,1478851950.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:30.081Z,1478851950.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:30.441Z,1478851950.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:30.477Z,1478851950.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:30.841Z,1478851950.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:30.876Z,1478851950.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:31.241Z,1478851951.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:31.277Z,1478851951.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:31.641Z,1478851951.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:31.677Z,1478851951.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:32.041Z,1478851952.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:32.077Z,1478851952.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:32.472Z,1478851952.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:32.493Z,1478851952.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:32.852Z,1478851952.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:32.886Z,1478851952.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:33.268Z,1478851953.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:33.288Z,1478851953.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:33.662Z,1478851953.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:33.689Z,1478851953.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:34.053Z,1478851954.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:34.069Z,1478851954.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:34.444Z,1478851954.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:34.473Z,1478851954.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:34.852Z,1478851954.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:34.867Z,1478851954.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:35.242Z,1478851955.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:35.273Z,1478851955.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:35.642Z,1478851955.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:35.670Z,1478851955.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:36.050Z,1478851956.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:36.085Z,1478851956.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:36.441Z,1478851956.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:36.473Z,1478851956.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:36.849Z,1478851956.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:36.881Z,1478851956.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:37.246Z,1478851957.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:37.297Z,1478851957.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:37.660Z,1478851957.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:37.691Z,1478851957.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:38.052Z,1478851958.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:38.081Z,1478851958.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:38.468Z,1478851958.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:38.484Z,1478851958.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:38.852Z,1478851958.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:38.951Z,1478851958.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:39.249Z,1478851959.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:39.269Z,1478851959.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:39.653Z,1478851959.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:39.710Z,1478851959.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:40.049Z,1478851960.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:40.069Z,1478851960.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:40.447Z,1478851960.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:40.500Z,1478851960.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:40.849Z,1478851960.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:40.896Z,1478851960.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:41.244Z,1478851961.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:41.268Z,1478851961.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:41.648Z,1478851961.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:41.669Z,1478851961.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:42.056Z,1478851962.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:42.072Z,1478851962.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:42.448Z,1478851962.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:42.470Z,1478851962.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:42.862Z,1478851962.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:42.881Z,1478851962.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:43.266Z,1478851963.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:43.285Z,1478851963.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:43.665Z,1478851963.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:43.680Z,1478851963.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:44.064Z,1478851964.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:44.092Z,1478851964.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:44.442Z,1478851964.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:44.469Z,1478851964.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:44.842Z,1478851964.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:44.865Z,1478851964.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:45.247Z,1478851965.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:45.269Z,1478851965.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:45.653Z,1478851965.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:45.673Z,1478851965.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:46.049Z,1478851966.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:46.069Z,1478851966.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:46.452Z,1478851966.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:46.468Z,1478851966.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:46.852Z,1478851966.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:46.880Z,1478851966.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:47.248Z,1478851967.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:47.268Z,1478851967.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:47.649Z,1478851967.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:47.669Z,1478851967.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:48.064Z,1478851968.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:48.079Z,1478851968.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:48.456Z,1478851968.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:48.484Z,1478851968.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:48.863Z,1478851968.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:48.885Z,1478851968.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:49.132Z,1478851969.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:49.260Z,1478851969.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:49.289Z,1478851969.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:49.642Z,1478851969.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:49.669Z,1478851969.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:49.928Z,1478851969.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:50.041Z,1478851970.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:50.057Z,1478851970.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:50.336Z,1478851970.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:50.446Z,1478851970.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:50.461Z,1478851970.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:50.841Z,1478851970.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:50.861Z,1478851970.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:51.132Z,1478851971.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:51.253Z,1478851971.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:51.294Z,1478851971.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:51.645Z,1478851971.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:51.697Z,1478851971.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:51.928Z,1478851971.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:52.053Z,1478851972.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:52.073Z,1478851972.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:52.340Z,1478851972.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:52.449Z,1478851972.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:52.477Z,1478851972.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:52.872Z,1478851972.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:52.916Z,1478851972.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:53.136Z,1478851973.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:53.279Z,1478851973.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:53.345Z,1478851973.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:12:53.932Z,1478851973.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:54.340Z,1478851974.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:55.136Z,1478851975.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:55.932Z,1478851975.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:56.340Z,1478851976.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:57.136Z,1478851977.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:57.932Z,1478851977.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:58.340Z,1478851978.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:59.136Z,1478851979.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:12:59.932Z,1478851979.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:00.340Z,1478851980.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:01.027Z,1478851981.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:01.065Z,1478851981.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:01.136Z,1478851981.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:01.273Z,1478851981.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:01.292Z,1478851981.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:01.649Z,1478851981.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:01.670Z,1478851981.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:01.933Z,1478851981.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:02.030Z,1478851982.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:02.079Z,1478851982.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:02.344Z,1478851982.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:02.417Z,1478851982.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:02.443Z,1478851982.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:02.835Z,1478851982.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:02.905Z,1478851982.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:03.140Z,1478851983.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:03.236Z,1478851983.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:03.313Z,1478851983.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:03.615Z,1478851983.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:03.650Z,1478851983.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:03.936Z,1478851983.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:04.041Z,1478851984.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:04.057Z,1478851984.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:04.344Z,1478851984.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:04.437Z,1478851984.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:04.452Z,1478851984.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:04.821Z,1478851984.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:04.862Z,1478851984.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:05.140Z,1478851985.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:05.227Z,1478851985.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:05.242Z,1478851985.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:05.636Z,1478851985.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:05.651Z,1478851985.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:05.936Z,1478851985.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:06.062Z,1478851986.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:06.086Z,1478851986.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:06.344Z,1478851986.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:06.444Z,1478851986.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:06.496Z,1478851986.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:06.824Z,1478851986.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:06.861Z,1478851986.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:07.140Z,1478851987.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:07.216Z,1478851987.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:07.257Z,1478851987.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:07.614Z,1478851987.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:07.650Z,1478851987.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:07.940Z,1478851987.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:08.015Z,1478851988.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:08.066Z,1478851988.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:08.432Z,1478851988.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:08.470Z,1478851988.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:08.736Z,1478851988.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:08.859Z,1478851988.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:08.922Z,1478851988.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:09.226Z,1478851989.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:09.275Z,1478851989.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:09.532Z,1478851989.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:09.635Z,1478851989.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:09.688Z,1478851989.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:09.940Z,1478851989.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:10.014Z,1478851990.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:10.058Z,1478851990.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:10.414Z,1478851990.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:10.437Z,1478851990.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:10.736Z,1478851990.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:10.839Z,1478851990.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:10.920Z,1478851990.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:11.246Z,1478851991.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:11.279Z,1478851991.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:11.532Z,1478851991.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:11.636Z,1478851991.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:11.665Z,1478851991.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:11.940Z,1478851991.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:12.025Z,1478851992.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:12.072Z,1478851992.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:12.423Z,1478851992.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:12.470Z,1478851992.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:12.736Z,1478851992.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:12.820Z,1478851992.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:12.877Z,1478851992.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:13.222Z,1478851993.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:13.242Z,1478851993.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:13.532Z,1478851993.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:13.623Z,1478851993.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:13.654Z,1478851993.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:13.940Z,1478851993.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:14.015Z,1478851994.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:14.078Z,1478851994.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:14.422Z,1478851994.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:14.446Z,1478851994.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:14.736Z,1478851994.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:14.823Z,1478851994.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:14.838Z,1478851994.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:15.215Z,1478851995.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:15.305Z,1478851995.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:15.533Z,1478851995.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:15.623Z,1478851995.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:15.666Z,1478851995.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:15.972Z,1478851995.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:16.039Z,1478851996.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:16.093Z,1478851996.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:16.431Z,1478851996.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:16.483Z,1478851996.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:16.770Z,1478851996.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:16.835Z,1478851996.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:16.850Z,1478851996.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:17.235Z,1478851997.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:17.292Z,1478851997.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:17.564Z,1478851997.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:17.622Z,1478851997.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:17.673Z,1478851997.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:18.014Z,1478851998.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:18.063Z,1478851998.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:18.260Z,1478851998.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:18.420Z,1478851998.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:18.451Z,1478851998.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:18.817Z,1478851998.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:18.831Z,1478851998.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:19.056Z,1478851999.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:19.225Z,1478851999.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:19.261Z,1478851999.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:19.617Z,1478851999.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:19.640Z,1478851999.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:19.853Z,1478851999.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:20.021Z,1478852000.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:20.036Z,1478852000.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:20.264Z,1478852000.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:20.425Z,1478852000.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:20.445Z,1478852000.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:20.825Z,1478852000.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:20.840Z,1478852000.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:21.060Z,1478852001.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:21.235Z,1478852001.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:21.257Z,1478852001.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:21.631Z,1478852001.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:21.658Z,1478852001.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:21.857Z,1478852001.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:22.042Z,1478852002.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:22.057Z,1478852002.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:22.264Z,1478852002.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:22.435Z,1478852002.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:22.489Z,1478852002.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:22.813Z,1478852002.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:22.839Z,1478852002.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:23.060Z,1478852003.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:23.221Z,1478852003.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:23.253Z,1478852003.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:23.618Z,1478852003.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:23.645Z,1478852003.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:23.856Z,1478852003.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:24.025Z,1478852004.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:24.046Z,1478852004.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:24.268Z,1478852004.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:24.429Z,1478852004.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:24.449Z,1478852004.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:24.813Z,1478852004.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:24.845Z,1478852004.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:25.064Z,1478852005.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:25.213Z,1478852005.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:25.233Z,1478852005.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:25.625Z,1478852005.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:25.659Z,1478852005.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:25.860Z,1478852005.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:26.025Z,1478852006.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:26.060Z,1478852006.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:26.268Z,1478852006.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:26.432Z,1478852006.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:26.458Z,1478852006.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:26.832Z,1478852006.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:26.857Z,1478852006.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:27.064Z,1478852007.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:27.228Z,1478852007.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:27.261Z,1478852007.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:27.624Z,1478852007.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:27.659Z,1478852007.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:27.860Z,1478852007.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:27.865Z,1478852007.865 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T08:13:27.865Z,1478852007.865 [Rowe_600LCM] Communications Fault, FailCount= 5
2016-11-11T08:13:27.865Z,1478852007.865 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T08:13:28.025Z,1478852008.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:28.045Z,1478852008.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T08:13:28.046Z,1478852008.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:28.095Z,1478852008.095 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T08:13:28.099Z,1478852008.099 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-11-11T08:13:28.267Z,1478852008.267 [Rowe_600LCM](INFO): Powering down
2016-11-11T08:13:28.420Z,1478852008.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:28.472Z,1478852008.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T08:13:28.474Z,1478852008.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:28.813Z,1478852008.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:28.838Z,1478852008.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:13:28.839Z,1478852008.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:29.076Z,1478852009.076 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2016-11-11T08:13:29.076Z,1478852009.076 [Rowe_600LCM] Hardware Fault, FailCount= 5
2016-11-11T08:13:29.076Z,1478852009.076 [Rowe_600LCM](ERROR): Hardware Fault
2016-11-11T08:13:29.221Z,1478852009.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:29.249Z,1478852009.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:13:29.250Z,1478852009.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:29.620Z,1478852009.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:29.677Z,1478852009.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:13:29.678Z,1478852009.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:30.017Z,1478852010.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:30.032Z,1478852010.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:13:30.033Z,1478852010.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:30.425Z,1478852010.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:30.481Z,1478852010.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:13:30.482Z,1478852010.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:30.821Z,1478852010.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:30.838Z,1478852010.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T08:13:30.839Z,1478852010.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:31.221Z,1478852011.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:31.275Z,1478852011.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T08:13:31.276Z,1478852011.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:31.636Z,1478852011.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:31.681Z,1478852011.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T08:13:31.682Z,1478852011.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:32.035Z,1478852012.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:32.056Z,1478852012.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T08:13:32.058Z,1478852012.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:32.428Z,1478852012.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:32.442Z,1478852012.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T08:13:32.444Z,1478852012.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:32.828Z,1478852012.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:32.843Z,1478852012.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T08:13:32.844Z,1478852012.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:33.222Z,1478852013.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:33.236Z,1478852013.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T08:13:33.237Z,1478852013.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:33.616Z,1478852013.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:33.643Z,1478852013.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T08:13:33.644Z,1478852013.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:34.029Z,1478852014.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:34.049Z,1478852014.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T08:13:34.050Z,1478852014.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:34.413Z,1478852014.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:34.446Z,1478852014.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T08:13:34.447Z,1478852014.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:34.813Z,1478852014.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:34.849Z,1478852014.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T08:13:34.850Z,1478852014.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:35.213Z,1478852015.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:35.249Z,1478852015.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T08:13:35.250Z,1478852015.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:35.614Z,1478852015.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:35.649Z,1478852015.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T08:13:35.651Z,1478852015.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:36.014Z,1478852016.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:36.041Z,1478852016.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T08:13:36.042Z,1478852016.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:36.414Z,1478852016.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:36.453Z,1478852016.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T08:13:36.454Z,1478852016.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:36.828Z,1478852016.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:36.855Z,1478852016.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T08:13:36.857Z,1478852016.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:37.225Z,1478852017.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:37.256Z,1478852017.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T08:13:37.257Z,1478852017.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:37.628Z,1478852017.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:37.643Z,1478852017.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T08:13:37.652Z,1478852017.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:38.033Z,1478852018.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:38.068Z,1478852018.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T08:13:38.069Z,1478852018.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:38.421Z,1478852018.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:38.437Z,1478852018.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T08:13:38.438Z,1478852018.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:38.821Z,1478852018.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:38.841Z,1478852018.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T08:13:38.843Z,1478852018.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:39.221Z,1478852019.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:39.244Z,1478852019.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T08:13:39.245Z,1478852019.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:39.621Z,1478852019.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:39.642Z,1478852019.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T08:13:39.645Z,1478852019.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:40.013Z,1478852020.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:40.046Z,1478852020.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T08:13:40.048Z,1478852020.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:40.414Z,1478852020.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:40.445Z,1478852020.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T08:13:40.446Z,1478852020.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:40.818Z,1478852020.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:40.843Z,1478852020.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T08:13:40.845Z,1478852020.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:41.213Z,1478852021.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:41.245Z,1478852021.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T08:13:41.246Z,1478852021.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:41.613Z,1478852021.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:41.649Z,1478852021.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T08:13:41.650Z,1478852021.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:42.032Z,1478852022.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:42.085Z,1478852022.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T08:13:42.086Z,1478852022.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:42.424Z,1478852022.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:42.457Z,1478852022.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T08:13:42.458Z,1478852022.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:42.828Z,1478852022.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:42.863Z,1478852022.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T08:13:42.864Z,1478852022.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:43.224Z,1478852023.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:43.258Z,1478852023.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T08:13:43.259Z,1478852023.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:43.617Z,1478852023.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:43.655Z,1478852023.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T08:13:43.656Z,1478852023.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:44.013Z,1478852024.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:44.077Z,1478852024.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T08:13:44.078Z,1478852024.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:44.416Z,1478852024.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:44.441Z,1478852024.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T08:13:44.442Z,1478852024.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:44.820Z,1478852024.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:44.834Z,1478852024.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T08:13:44.836Z,1478852024.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:45.221Z,1478852025.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:45.279Z,1478852025.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T08:13:45.280Z,1478852025.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:45.613Z,1478852025.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:45.645Z,1478852025.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T08:13:45.646Z,1478852025.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:46.013Z,1478852026.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:46.061Z,1478852026.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T08:13:46.062Z,1478852026.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:46.413Z,1478852026.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:46.462Z,1478852026.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T08:13:46.463Z,1478852026.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:46.813Z,1478852026.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:46.845Z,1478852026.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T08:13:46.846Z,1478852026.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:47.235Z,1478852027.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:47.250Z,1478852027.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T08:13:47.251Z,1478852027.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:47.640Z,1478852027.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:47.661Z,1478852027.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:48.028Z,1478852028.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:48.062Z,1478852028.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:48.424Z,1478852028.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:48.457Z,1478852028.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:48.821Z,1478852028.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:48.836Z,1478852028.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:49.216Z,1478852029.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:49.244Z,1478852029.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:49.621Z,1478852029.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:49.641Z,1478852029.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:50.022Z,1478852030.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:50.041Z,1478852030.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:50.413Z,1478852030.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:50.438Z,1478852030.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:50.820Z,1478852030.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:50.837Z,1478852030.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:51.221Z,1478852031.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:51.241Z,1478852031.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:51.617Z,1478852031.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:51.638Z,1478852031.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:52.021Z,1478852032.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:52.041Z,1478852032.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:52.430Z,1478852032.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:52.457Z,1478852032.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:52.478Z,1478852032.478 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T08:08:52.2Z
2016-11-11T08:13:52.478Z,1478852032.478 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T08:13:52.478Z,1478852032.478 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T08:13:52.828Z,1478852032.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:52.856Z,1478852032.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:53.680Z,1478852033.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:53.701Z,1478852033.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:53.813Z,1478852033.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:53.837Z,1478852033.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:57.096Z,1478852037.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:57.165Z,1478852037.165 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:57.165Z,1478852037.165 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2016-11-11T08:13:57.165Z,1478852037.165 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:13:57.172Z,1478852037.172 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:57.172Z,1478852037.172 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 49
2016-11-11T08:13:57.172Z,1478852037.172 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:13:57.174Z,1478852037.174 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:57.174Z,1478852037.174 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 49
2016-11-11T08:13:57.174Z,1478852037.174 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:13:57.205Z,1478852037.204 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:13:57.205Z,1478852037.205 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:13:57.205Z,1478852037.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:13:57.224Z,1478852037.224 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20161111T044527/Courier0080.lzma
2016-11-11T08:13:57.253Z,1478852037.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:57.329Z,1478852037.329 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:13:57.329Z,1478852037.329 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2016-11-11T08:13:57.330Z,1478852037.330 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:13:57.330Z,1478852037.330 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 49
2016-11-11T08:13:57.335Z,1478852037.335 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:13:57.335Z,1478852037.335 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 49
2016-11-11T08:13:57.667Z,1478852037.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:57.684Z,1478852037.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:13:57.689Z,1478852037.689 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:13:57.690Z,1478852037.690 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:13:57.695Z,1478852037.694 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:13:57.714Z,1478852037.714 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:13:57.715Z,1478852037.714 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:13:57.715Z,1478852037.715 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:13:57.716Z,1478852037.716 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:13:57.717Z,1478852037.717 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:13:58.018Z,1478852038.018 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0080.lzma.bak
2016-11-11T08:13:58.018Z,1478852038.018 [DataOverHttps](INFO): SBD MOMSN=4555204
2016-11-11T08:13:58.056Z,1478852038.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:58.100Z,1478852038.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2016-11-11T08:13:58.101Z,1478852038.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:59.324Z,1478852039.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:59.339Z,1478852039.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2016-11-11T08:13:59.340Z,1478852039.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:13:59.457Z,1478852039.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:13:59.489Z,1478852039.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2016-11-11T08:13:59.490Z,1478852039.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:02.840Z,1478852042.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:02.849Z,1478852042.849 [BPC1](ERROR): Failed to receive battery data
2016-11-11T08:14:02.849Z,1478852042.849 [BPC1] Communications Fault, FailCount= 1
2016-11-11T08:14:02.849Z,1478852042.849 [BPC1](ERROR): Communications Fault
2016-11-11T08:14:02.856Z,1478852042.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2016-11-11T08:14:02.857Z,1478852042.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:02.921Z,1478852042.921 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T08:14:03.000Z,1478852043.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:03.032Z,1478852043.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2016-11-11T08:14:03.033Z,1478852043.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:03.391Z,1478852043.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:03.405Z,1478852043.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2016-11-11T08:14:03.406Z,1478852043.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:03.785Z,1478852043.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:03.799Z,1478852043.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2016-11-11T08:14:03.800Z,1478852043.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:03.820Z,1478852043.820 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:14:03.820Z,1478852043.820 [BPC1] No Fault, FailCount= 1
2016-11-11T08:14:04.161Z,1478852044.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:04.244Z,1478852044.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2016-11-11T08:14:04.245Z,1478852044.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:04.570Z,1478852044.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:04.621Z,1478852044.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2016-11-11T08:14:04.622Z,1478852044.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:08.043Z,1478852048.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:08.058Z,1478852048.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2016-11-11T08:14:08.060Z,1478852048.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:08.123Z,1478852048.123 [DataOverHttps](INFO): Sending 387 bytes from file Logs/20161111T044527/Express0081.lzma
2016-11-11T08:14:08.171Z,1478852048.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:08.202Z,1478852048.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2016-11-11T08:14:08.207Z,1478852048.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:08.532Z,1478852048.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:08.570Z,1478852048.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2016-11-11T08:14:08.571Z,1478852048.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:08.890Z,1478852048.890 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0081.lzma.bak
2016-11-11T08:14:08.891Z,1478852048.891 [DataOverHttps](INFO): SBD MOMSN=4555207
2016-11-11T08:14:08.937Z,1478852048.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:08.979Z,1478852048.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2016-11-11T08:14:08.980Z,1478852048.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:10.175Z,1478852050.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:10.190Z,1478852050.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2016-11-11T08:14:10.191Z,1478852050.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:10.200Z,1478852050.200 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T08:14:10.200Z,1478852050.200 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T08:14:10.200Z,1478852050.200 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T08:14:10.289Z,1478852050.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:10.329Z,1478852050.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T08:14:10.330Z,1478852050.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:13.578Z,1478852053.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:13.601Z,1478852053.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T08:14:13.602Z,1478852053.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:13.730Z,1478852053.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:13.745Z,1478852053.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2016-11-11T08:14:13.746Z,1478852053.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:14.114Z,1478852054.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:14.135Z,1478852054.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2016-11-11T08:14:14.137Z,1478852054.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:14.510Z,1478852054.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:14.540Z,1478852054.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2016-11-11T08:14:14.541Z,1478852054.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:14.899Z,1478852054.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:14.957Z,1478852054.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2016-11-11T08:14:14.958Z,1478852054.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:15.299Z,1478852055.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:15.316Z,1478852055.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2016-11-11T08:14:15.317Z,1478852055.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:15.689Z,1478852055.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:15.744Z,1478852055.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2016-11-11T08:14:15.745Z,1478852055.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:16.090Z,1478852056.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:16.131Z,1478852056.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2016-11-11T08:14:16.132Z,1478852056.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:16.490Z,1478852056.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:16.497Z,1478852056.497 [PNI_TCM](ERROR): CRC does not match. Expected:0x7992 got:0x140
2016-11-11T08:14:16.553Z,1478852056.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2016-11-11T08:14:16.554Z,1478852056.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:16.899Z,1478852056.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:16.933Z,1478852056.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2016-11-11T08:14:16.934Z,1478852056.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:17.291Z,1478852057.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:17.345Z,1478852057.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:17.696Z,1478852057.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:17.757Z,1478852057.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:18.101Z,1478852058.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:18.124Z,1478852058.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:18.513Z,1478852058.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:18.532Z,1478852058.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:18.904Z,1478852058.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:18.940Z,1478852058.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:19.319Z,1478852059.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:19.334Z,1478852059.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:19.701Z,1478852059.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:19.745Z,1478852059.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:20.090Z,1478852060.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:20.106Z,1478852060.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:20.496Z,1478852060.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:20.514Z,1478852060.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:20.896Z,1478852060.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:20.930Z,1478852060.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:21.299Z,1478852061.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:21.329Z,1478852061.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:21.698Z,1478852061.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:21.745Z,1478852061.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:22.096Z,1478852062.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:22.124Z,1478852062.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:22.498Z,1478852062.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:22.526Z,1478852062.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:22.901Z,1478852062.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:22.929Z,1478852062.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:23.289Z,1478852063.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:23.345Z,1478852063.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:23.699Z,1478852063.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:23.741Z,1478852063.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:24.104Z,1478852064.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:24.140Z,1478852064.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:24.504Z,1478852064.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:24.549Z,1478852064.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:24.904Z,1478852064.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:24.940Z,1478852064.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:25.297Z,1478852065.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:25.344Z,1478852065.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:25.696Z,1478852065.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:25.714Z,1478852065.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:26.097Z,1478852066.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:26.114Z,1478852066.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:26.496Z,1478852066.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:26.511Z,1478852066.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:26.892Z,1478852066.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:26.925Z,1478852066.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:27.295Z,1478852067.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:27.325Z,1478852067.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:27.698Z,1478852067.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:27.719Z,1478852067.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:28.101Z,1478852068.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:28.119Z,1478852068.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:28.504Z,1478852068.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:28.585Z,1478852068.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:28.914Z,1478852068.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:28.929Z,1478852068.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:29.300Z,1478852069.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:29.367Z,1478852069.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:29.713Z,1478852069.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:29.737Z,1478852069.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:30.114Z,1478852070.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:30.163Z,1478852070.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:30.491Z,1478852070.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:30.537Z,1478852070.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:30.889Z,1478852070.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:30.927Z,1478852070.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:31.289Z,1478852071.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:31.328Z,1478852071.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:31.689Z,1478852071.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:31.725Z,1478852071.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:32.090Z,1478852072.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:32.132Z,1478852072.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:32.489Z,1478852072.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:32.504Z,1478852072.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:32.889Z,1478852072.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:32.909Z,1478852072.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:33.295Z,1478852073.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:33.319Z,1478852073.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:33.697Z,1478852073.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:33.719Z,1478852073.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:34.106Z,1478852074.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:34.127Z,1478852074.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:34.506Z,1478852074.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:34.553Z,1478852074.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:34.927Z,1478852074.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:34.968Z,1478852074.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:35.307Z,1478852075.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:35.327Z,1478852075.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:35.697Z,1478852075.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:35.726Z,1478852075.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:36.089Z,1478852076.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:36.132Z,1478852076.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:36.489Z,1478852076.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:36.549Z,1478852076.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:36.889Z,1478852076.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:36.927Z,1478852076.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:37.289Z,1478852077.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:37.336Z,1478852077.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:37.689Z,1478852077.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:37.737Z,1478852077.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:38.093Z,1478852078.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:38.153Z,1478852078.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:38.494Z,1478852078.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:38.531Z,1478852078.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:38.889Z,1478852078.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:38.934Z,1478852078.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:39.303Z,1478852079.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:39.348Z,1478852079.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:39.704Z,1478852079.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:39.785Z,1478852079.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:40.124Z,1478852080.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:40.146Z,1478852080.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:40.500Z,1478852080.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:40.533Z,1478852080.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:40.893Z,1478852080.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:40.938Z,1478852080.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:41.295Z,1478852081.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:41.345Z,1478852081.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:41.696Z,1478852081.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:41.711Z,1478852081.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:42.100Z,1478852082.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:42.128Z,1478852082.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:42.493Z,1478852082.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:42.517Z,1478852082.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:42.897Z,1478852082.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:42.949Z,1478852082.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:43.290Z,1478852083.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:43.327Z,1478852083.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:43.689Z,1478852083.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:43.741Z,1478852083.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:44.089Z,1478852084.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:44.142Z,1478852084.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:44.504Z,1478852084.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:44.548Z,1478852084.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:44.904Z,1478852084.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:44.932Z,1478852084.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:45.308Z,1478852085.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:45.341Z,1478852085.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:45.700Z,1478852085.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:45.726Z,1478852085.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:46.094Z,1478852086.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:46.116Z,1478852086.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:46.496Z,1478852086.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:46.513Z,1478852086.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:46.897Z,1478852086.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:46.919Z,1478852086.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:47.292Z,1478852087.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:47.317Z,1478852087.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:47.689Z,1478852087.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:47.709Z,1478852087.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:48.094Z,1478852088.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:48.109Z,1478852088.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:48.489Z,1478852088.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:48.509Z,1478852088.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:48.893Z,1478852088.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:48.908Z,1478852088.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:49.290Z,1478852089.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:49.317Z,1478852089.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:49.708Z,1478852089.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:49.729Z,1478852089.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:50.104Z,1478852090.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:50.124Z,1478852090.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:50.504Z,1478852090.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:50.525Z,1478852090.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:50.904Z,1478852090.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:50.960Z,1478852090.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:51.297Z,1478852091.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:51.329Z,1478852091.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:51.694Z,1478852091.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:51.709Z,1478852091.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:52.090Z,1478852092.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:52.135Z,1478852092.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:52.493Z,1478852092.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:52.508Z,1478852092.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:52.894Z,1478852092.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:52.909Z,1478852092.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:53.293Z,1478852093.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:53.315Z,1478852093.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:53.693Z,1478852093.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:53.723Z,1478852093.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:54.090Z,1478852094.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:54.105Z,1478852094.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:54.493Z,1478852094.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:54.529Z,1478852094.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:54.908Z,1478852094.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:54.929Z,1478852094.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:55.308Z,1478852095.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:55.327Z,1478852095.327 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T08:14:55.327Z,1478852095.327 [BPC1] Data Fault, FailCount= 1
2016-11-11T08:14:55.327Z,1478852095.327 [BPC1](ERROR): Data Fault
2016-11-11T08:14:55.341Z,1478852095.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:55.362Z,1478852095.362 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T08:14:55.704Z,1478852095.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:55.732Z,1478852095.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:56.104Z,1478852096.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:56.169Z,1478852096.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:56.490Z,1478852096.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:56.521Z,1478852096.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:56.541Z,1478852096.541 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:14:56.541Z,1478852096.541 [BPC1] No Fault, FailCount= 1
2016-11-11T08:14:56.894Z,1478852096.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:56.965Z,1478852096.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:57.303Z,1478852097.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:57.354Z,1478852097.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:57.694Z,1478852097.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:57.710Z,1478852097.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:58.094Z,1478852098.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:58.123Z,1478852098.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:58.493Z,1478852098.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:58.509Z,1478852098.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:58.893Z,1478852098.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:58.909Z,1478852098.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:59.289Z,1478852099.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:59.310Z,1478852099.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:14:59.693Z,1478852099.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:14:59.709Z,1478852099.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:00.104Z,1478852100.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:00.121Z,1478852100.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:00.500Z,1478852100.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:00.518Z,1478852100.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:00.904Z,1478852100.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:00.950Z,1478852100.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:01.300Z,1478852101.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:01.317Z,1478852101.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:01.693Z,1478852101.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:01.715Z,1478852101.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:02.089Z,1478852102.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:02.109Z,1478852102.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:02.493Z,1478852102.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:02.508Z,1478852102.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:02.889Z,1478852102.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:02.909Z,1478852102.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:03.293Z,1478852103.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:03.308Z,1478852103.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:03.689Z,1478852103.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:03.704Z,1478852103.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:04.093Z,1478852104.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:04.116Z,1478852104.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:04.489Z,1478852104.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:04.508Z,1478852104.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:04.908Z,1478852104.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:04.929Z,1478852104.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:05.304Z,1478852105.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:05.322Z,1478852105.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:05.693Z,1478852105.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:05.715Z,1478852105.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:06.093Z,1478852106.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:06.141Z,1478852106.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:06.490Z,1478852106.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:06.516Z,1478852106.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:06.890Z,1478852106.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:06.929Z,1478852106.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:07.290Z,1478852107.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:07.349Z,1478852107.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:07.705Z,1478852107.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:07.753Z,1478852107.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:08.100Z,1478852108.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:08.153Z,1478852108.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:08.504Z,1478852108.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:08.523Z,1478852108.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:08.900Z,1478852108.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:08.929Z,1478852108.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:09.289Z,1478852109.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:09.315Z,1478852109.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:09.690Z,1478852109.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:09.741Z,1478852109.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:10.090Z,1478852110.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:10.135Z,1478852110.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:10.489Z,1478852110.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:10.545Z,1478852110.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:10.890Z,1478852110.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:10.949Z,1478852110.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:14.244Z,1478852114.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:14.297Z,1478852114.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:14.405Z,1478852114.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:14.457Z,1478852114.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:14.786Z,1478852114.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:14.801Z,1478852114.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:15.182Z,1478852115.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:15.213Z,1478852115.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:15.576Z,1478852115.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:15.595Z,1478852115.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:15.979Z,1478852115.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:16.012Z,1478852116.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:16.371Z,1478852116.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:16.398Z,1478852116.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:16.769Z,1478852116.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:16.805Z,1478852116.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:17.170Z,1478852117.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:17.200Z,1478852117.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:17.569Z,1478852117.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:17.598Z,1478852117.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:17.971Z,1478852117.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:18.004Z,1478852118.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:18.374Z,1478852118.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:18.408Z,1478852118.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:18.769Z,1478852118.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:18.809Z,1478852118.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:19.186Z,1478852119.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:19.220Z,1478852119.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:19.596Z,1478852119.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:19.612Z,1478852119.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:19.984Z,1478852119.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:20.017Z,1478852120.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:20.390Z,1478852120.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:20.404Z,1478852120.404 [PNI_TCM](ERROR): CRC does not match. Expected:0x43284 got:0x49691
2016-11-11T08:15:20.422Z,1478852120.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:20.778Z,1478852120.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:20.794Z,1478852120.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:21.176Z,1478852121.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:21.191Z,1478852121.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:21.580Z,1478852121.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:21.615Z,1478852121.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:21.979Z,1478852121.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:21.988Z,1478852121.988 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2016-11-11T08:15:22.025Z,1478852122.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:22.379Z,1478852122.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:22.394Z,1478852122.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:22.777Z,1478852122.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:22.805Z,1478852122.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:23.174Z,1478852123.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:23.209Z,1478852123.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:23.572Z,1478852123.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:23.608Z,1478852123.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.399200 seconds old.
2016-11-11T08:15:23.609Z,1478852123.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:23.610Z,1478852123.610 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.399600 seconds old.
2016-11-11T08:15:23.616Z,1478852123.616 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.388000 seconds old.
2016-11-11T08:15:23.623Z,1478852123.623 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.388400 seconds old.
2016-11-11T08:15:23.625Z,1478852123.625 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.392600 seconds old.
2016-11-11T08:15:23.981Z,1478852123.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:23.999Z,1478852123.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.791100 seconds old.
2016-11-11T08:15:24.001Z,1478852124.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:24.002Z,1478852124.001 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.791500 seconds old.
2016-11-11T08:15:24.004Z,1478852124.004 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.775800 seconds old.
2016-11-11T08:15:24.007Z,1478852124.007 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.776000 seconds old.
2016-11-11T08:15:24.008Z,1478852124.008 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.776100 seconds old.
2016-11-11T08:15:24.392Z,1478852124.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:24.401Z,1478852124.401 [BPC1](ERROR): Failed to parse message.
2016-11-11T08:15:24.401Z,1478852124.401 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T08:15:24.401Z,1478852124.401 [BPC1] Data Fault, FailCount= 1
2016-11-11T08:15:24.401Z,1478852124.401 [BPC1](ERROR): Data Fault
2016-11-11T08:15:24.408Z,1478852124.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.199500 seconds old.
2016-11-11T08:15:24.409Z,1478852124.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:24.410Z,1478852124.410 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.199900 seconds old.
2016-11-11T08:15:24.412Z,1478852124.412 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.184100 seconds old.
2016-11-11T08:15:24.415Z,1478852124.415 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.184300 seconds old.
2016-11-11T08:15:24.417Z,1478852124.417 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.184500 seconds old.
2016-11-11T08:15:24.468Z,1478852124.468 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T08:15:24.786Z,1478852124.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:24.817Z,1478852124.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.609000 seconds old.
2016-11-11T08:15:24.818Z,1478852124.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:24.820Z,1478852124.820 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.609600 seconds old.
2016-11-11T08:15:24.822Z,1478852124.822 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.593600 seconds old.
2016-11-11T08:15:24.833Z,1478852124.833 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.602100 seconds old.
2016-11-11T08:15:24.834Z,1478852124.834 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.602100 seconds old.
2016-11-11T08:15:25.196Z,1478852125.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:25.209Z,1478852125.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.000600 seconds old.
2016-11-11T08:15:25.210Z,1478852125.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:25.211Z,1478852125.211 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.001000 seconds old.
2016-11-11T08:15:25.213Z,1478852125.213 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.985000 seconds old.
2016-11-11T08:15:25.216Z,1478852125.216 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.985300 seconds old.
2016-11-11T08:15:25.217Z,1478852125.217 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.985200 seconds old.
2016-11-11T08:15:25.585Z,1478852125.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:25.608Z,1478852125.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.399100 seconds old.
2016-11-11T08:15:25.609Z,1478852125.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:25.609Z,1478852125.609 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.399500 seconds old.
2016-11-11T08:15:25.612Z,1478852125.612 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 2.383700 seconds old.
2016-11-11T08:15:25.614Z,1478852125.615 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.383900 seconds old.
2016-11-11T08:15:25.616Z,1478852125.616 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 2.384100 seconds old.
2016-11-11T08:15:25.630Z,1478852125.630 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:15:25.631Z,1478852125.631 [BPC1] No Fault, FailCount= 1
2016-11-11T08:15:25.972Z,1478852125.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:26.056Z,1478852126.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.847200 seconds old.
2016-11-11T08:15:26.057Z,1478852126.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:26.058Z,1478852126.058 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.847600 seconds old.
2016-11-11T08:15:26.060Z,1478852126.060 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 2.831700 seconds old.
2016-11-11T08:15:26.062Z,1478852126.062 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.831900 seconds old.
2016-11-11T08:15:26.064Z,1478852126.064 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 2.832100 seconds old.
2016-11-11T08:15:26.378Z,1478852126.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:26.433Z,1478852126.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.224300 seconds old.
2016-11-11T08:15:26.434Z,1478852126.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:26.435Z,1478852126.435 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.224700 seconds old.
2016-11-11T08:15:26.468Z,1478852126.467 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 3.239000 seconds old.
2016-11-11T08:15:26.473Z,1478852126.473 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.239500 seconds old.
2016-11-11T08:15:26.476Z,1478852126.476 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 3.244400 seconds old.
2016-11-11T08:15:26.770Z,1478852126.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:26.812Z,1478852126.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.603300 seconds old.
2016-11-11T08:15:26.813Z,1478852126.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:26.814Z,1478852126.814 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.603700 seconds old.
2016-11-11T08:15:26.821Z,1478852126.820 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 3.592100 seconds old.
2016-11-11T08:15:26.827Z,1478852126.827 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.592500 seconds old.
2016-11-11T08:15:26.829Z,1478852126.829 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 3.596800 seconds old.
2016-11-11T08:15:27.175Z,1478852127.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:27.190Z,1478852127.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.981300 seconds old.
2016-11-11T08:15:27.191Z,1478852127.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:27.208Z,1478852127.208 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.997900 seconds old.
2016-11-11T08:15:27.211Z,1478852127.211 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 3.982000 seconds old.
2016-11-11T08:15:27.217Z,1478852127.217 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.986500 seconds old.
2016-11-11T08:15:27.219Z,1478852127.218 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 3.986500 seconds old.
2016-11-11T08:15:27.577Z,1478852127.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:27.592Z,1478852127.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.384000 seconds old.
2016-11-11T08:15:27.593Z,1478852127.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:27.594Z,1478852127.594 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.384300 seconds old.
2016-11-11T08:15:27.597Z,1478852127.597 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 4.368300 seconds old.
2016-11-11T08:15:27.632Z,1478852127.632 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.368500 seconds old.
2016-11-11T08:15:27.633Z,1478852127.633 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 4.401000 seconds old.
2016-11-11T08:15:27.970Z,1478852127.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:27.996Z,1478852127.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.788000 seconds old.
2016-11-11T08:15:27.998Z,1478852127.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:27.998Z,1478852127.998 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.788400 seconds old.
2016-11-11T08:15:28.017Z,1478852128.017 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 4.788500 seconds old.
2016-11-11T08:15:28.024Z,1478852128.024 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.793200 seconds old.
2016-11-11T08:15:28.025Z,1478852128.025 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 4.793200 seconds old.
2016-11-11T08:15:28.375Z,1478852128.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:28.404Z,1478852128.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:28.785Z,1478852128.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:28.801Z,1478852128.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:29.179Z,1478852129.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:29.201Z,1478852129.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:29.591Z,1478852129.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:29.606Z,1478852129.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:29.982Z,1478852129.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:30.016Z,1478852130.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:30.393Z,1478852130.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:30.408Z,1478852130.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:30.788Z,1478852130.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:30.810Z,1478852130.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:31.169Z,1478852131.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:31.205Z,1478852131.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:31.572Z,1478852131.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:31.578Z,1478852131.578 [PNI_TCM](ERROR): CRC does not match. Expected:0x13346 got:0x16476
2016-11-11T08:15:31.610Z,1478852131.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:31.972Z,1478852131.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:32.003Z,1478852132.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:32.369Z,1478852132.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:32.405Z,1478852132.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:32.770Z,1478852132.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:32.806Z,1478852132.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:33.172Z,1478852133.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:33.203Z,1478852133.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:33.571Z,1478852133.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:33.609Z,1478852133.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:33.970Z,1478852133.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:34.013Z,1478852134.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:34.376Z,1478852134.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:34.412Z,1478852134.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:34.784Z,1478852134.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:34.818Z,1478852134.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:35.188Z,1478852135.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:35.214Z,1478852135.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:35.600Z,1478852135.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:35.616Z,1478852135.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:35.988Z,1478852135.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:36.011Z,1478852136.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:36.372Z,1478852136.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:36.405Z,1478852136.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:36.777Z,1478852136.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:36.797Z,1478852136.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:37.176Z,1478852137.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:37.217Z,1478852137.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:37.572Z,1478852137.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:37.607Z,1478852137.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:37.974Z,1478852137.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:38.058Z,1478852138.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:38.369Z,1478852138.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:38.403Z,1478852138.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:38.769Z,1478852138.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:38.804Z,1478852138.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:39.172Z,1478852139.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:39.205Z,1478852139.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:39.571Z,1478852139.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:39.605Z,1478852139.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:39.992Z,1478852139.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:40.006Z,1478852140.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:40.384Z,1478852140.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:40.406Z,1478852140.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:40.791Z,1478852140.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:40.813Z,1478852140.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:41.191Z,1478852141.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:41.206Z,1478852141.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:41.569Z,1478852141.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:41.578Z,1478852141.578 [BPC1](ERROR): Failed to receive battery data
2016-11-11T08:15:41.578Z,1478852141.578 [BPC1] Communications Fault, FailCount= 2
2016-11-11T08:15:41.578Z,1478852141.578 [BPC1](ERROR): Communications Fault
2016-11-11T08:15:41.598Z,1478852141.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:41.655Z,1478852141.655 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T08:15:41.969Z,1478852141.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:42.011Z,1478852142.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:42.372Z,1478852142.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:42.410Z,1478852142.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:42.771Z,1478852142.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:42.786Z,1478852142.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:42.835Z,1478852142.835 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:15:42.839Z,1478852142.839 [BPC1] No Fault, FailCount= 2
2016-11-11T08:15:43.169Z,1478852143.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:43.250Z,1478852143.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:43.576Z,1478852143.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:43.622Z,1478852143.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:43.981Z,1478852143.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:43.996Z,1478852143.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:44.376Z,1478852144.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:44.391Z,1478852144.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:44.790Z,1478852144.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:44.813Z,1478852144.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:45.192Z,1478852145.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:45.207Z,1478852145.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:45.582Z,1478852145.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:45.597Z,1478852145.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:45.977Z,1478852145.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:45.992Z,1478852145.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:46.380Z,1478852146.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:46.396Z,1478852146.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:46.791Z,1478852146.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:46.806Z,1478852146.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:47.192Z,1478852147.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:47.206Z,1478852147.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:47.574Z,1478852147.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:47.600Z,1478852147.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:47.969Z,1478852147.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:48.003Z,1478852148.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:48.370Z,1478852148.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:48.395Z,1478852148.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:48.774Z,1478852148.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:48.809Z,1478852148.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:49.173Z,1478852149.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:49.198Z,1478852149.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:49.569Z,1478852149.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:49.604Z,1478852149.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:49.984Z,1478852149.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:49.999Z,1478852149.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:50.378Z,1478852150.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:50.403Z,1478852150.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:50.769Z,1478852150.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:50.805Z,1478852150.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:51.174Z,1478852151.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:51.189Z,1478852151.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:51.242Z,1478852151.242 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T08:15:51.577Z,1478852151.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:51.618Z,1478852151.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:51.974Z,1478852151.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:52.001Z,1478852152.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:52.377Z,1478852152.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:52.399Z,1478852152.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:52.772Z,1478852152.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:52.804Z,1478852152.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:53.177Z,1478852153.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:53.200Z,1478852153.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:53.580Z,1478852153.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:53.600Z,1478852153.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:53.969Z,1478852153.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:54.005Z,1478852154.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:54.370Z,1478852154.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:54.439Z,1478852154.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:54.774Z,1478852154.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:54.797Z,1478852154.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:55.196Z,1478852155.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:55.212Z,1478852155.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:55.584Z,1478852155.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:55.645Z,1478852155.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:55.977Z,1478852155.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:55.997Z,1478852155.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:56.381Z,1478852156.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:56.401Z,1478852156.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:56.778Z,1478852156.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:56.825Z,1478852156.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:57.180Z,1478852157.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:57.194Z,1478852157.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:57.580Z,1478852157.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:57.632Z,1478852157.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:57.977Z,1478852157.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:58.027Z,1478852158.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:58.380Z,1478852158.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:58.395Z,1478852158.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:58.772Z,1478852158.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:58.800Z,1478852158.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:59.177Z,1478852159.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:59.197Z,1478852159.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:59.590Z,1478852159.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:15:59.609Z,1478852159.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:15:59.993Z,1478852159.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:00.013Z,1478852160.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:00.370Z,1478852160.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:00.395Z,1478852160.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:00.774Z,1478852160.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:00.799Z,1478852160.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:01.169Z,1478852161.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:01.195Z,1478852161.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:01.569Z,1478852161.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:01.607Z,1478852161.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:01.970Z,1478852161.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:02.002Z,1478852162.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:02.374Z,1478852162.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:02.400Z,1478852162.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:02.771Z,1478852162.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:02.807Z,1478852162.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:03.170Z,1478852163.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:03.209Z,1478852163.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:03.570Z,1478852163.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:03.585Z,1478852163.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:03.984Z,1478852163.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:04.019Z,1478852164.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:04.381Z,1478852164.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:04.408Z,1478852164.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:04.785Z,1478852164.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:04.816Z,1478852164.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:05.189Z,1478852165.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:05.221Z,1478852165.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:05.577Z,1478852165.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:05.594Z,1478852165.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:05.977Z,1478852165.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:05.998Z,1478852165.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:06.377Z,1478852166.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:06.398Z,1478852166.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:06.780Z,1478852166.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:06.802Z,1478852166.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:07.172Z,1478852167.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:07.195Z,1478852167.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:07.578Z,1478852167.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:07.605Z,1478852167.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:07.970Z,1478852167.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:07.995Z,1478852167.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:08.369Z,1478852168.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:08.401Z,1478852168.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:08.792Z,1478852168.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:08.845Z,1478852168.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:09.184Z,1478852169.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:09.214Z,1478852169.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:09.569Z,1478852169.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:09.600Z,1478852169.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:09.970Z,1478852169.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:10.029Z,1478852170.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:10.369Z,1478852170.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:10.389Z,1478852170.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:10.773Z,1478852170.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:10.823Z,1478852170.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:11.174Z,1478852171.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:11.197Z,1478852171.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:14.625Z,1478852174.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:14.677Z,1478852174.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:14.792Z,1478852174.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:14.815Z,1478852174.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:15.137Z,1478852175.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:15.194Z,1478852175.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:15.537Z,1478852175.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:15.557Z,1478852175.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:15.941Z,1478852175.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:15.955Z,1478852175.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:16.336Z,1478852176.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:16.351Z,1478852176.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:16.736Z,1478852176.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:16.752Z,1478852176.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:17.143Z,1478852177.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:17.165Z,1478852177.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:17.542Z,1478852177.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:17.556Z,1478852177.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:17.932Z,1478852177.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:17.964Z,1478852177.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:18.336Z,1478852178.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:18.357Z,1478852178.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:18.737Z,1478852178.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:18.752Z,1478852178.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:19.132Z,1478852179.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:19.155Z,1478852179.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:19.537Z,1478852179.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:19.557Z,1478852179.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:19.938Z,1478852179.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:19.952Z,1478852179.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:20.341Z,1478852180.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:20.361Z,1478852180.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:20.729Z,1478852180.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:20.763Z,1478852180.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:21.152Z,1478852181.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:21.167Z,1478852181.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:21.551Z,1478852181.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:21.567Z,1478852181.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:21.933Z,1478852181.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:21.965Z,1478852181.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:22.333Z,1478852182.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:22.359Z,1478852182.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:22.734Z,1478852182.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:22.769Z,1478852182.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:23.113Z,1478852183.113 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T08:16:23.129Z,1478852183.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:23.170Z,1478852183.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:23.530Z,1478852183.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:23.557Z,1478852183.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:23.934Z,1478852183.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:23.961Z,1478852183.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:24.337Z,1478852184.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:24.364Z,1478852184.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:24.732Z,1478852184.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:24.747Z,1478852184.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:25.133Z,1478852185.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:25.148Z,1478852185.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:25.533Z,1478852185.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:25.553Z,1478852185.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:25.936Z,1478852185.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:25.982Z,1478852185.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:26.329Z,1478852186.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:26.364Z,1478852186.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:26.732Z,1478852186.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:26.757Z,1478852186.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:27.129Z,1478852187.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:27.189Z,1478852187.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:27.533Z,1478852187.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:27.569Z,1478852187.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:27.929Z,1478852187.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:27.972Z,1478852187.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:28.329Z,1478852188.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:28.389Z,1478852188.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:28.713Z,1478852188.713 [NAL9602](INFO): Powering down
2016-11-11T08:16:28.732Z,1478852188.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:28.763Z,1478852188.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:29.129Z,1478852189.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:29.182Z,1478852189.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:29.529Z,1478852189.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:29.549Z,1478852189.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:29.931Z,1478852189.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:29.981Z,1478852189.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:30.335Z,1478852190.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:30.357Z,1478852190.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:30.735Z,1478852190.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:30.757Z,1478852190.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:31.132Z,1478852191.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:31.154Z,1478852191.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:31.536Z,1478852191.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:31.550Z,1478852191.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:31.936Z,1478852191.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:31.962Z,1478852191.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:32.332Z,1478852192.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:32.354Z,1478852192.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:32.737Z,1478852192.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:32.757Z,1478852192.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:33.137Z,1478852193.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:33.151Z,1478852193.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:33.532Z,1478852193.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:33.555Z,1478852193.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:33.937Z,1478852193.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:33.957Z,1478852193.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:34.336Z,1478852194.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:34.351Z,1478852194.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:34.740Z,1478852194.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:34.756Z,1478852194.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:35.129Z,1478852195.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:35.163Z,1478852195.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:35.529Z,1478852195.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:35.564Z,1478852195.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:35.936Z,1478852195.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:35.959Z,1478852195.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:36.329Z,1478852196.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:36.363Z,1478852196.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:36.729Z,1478852196.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:36.762Z,1478852196.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:37.128Z,1478852197.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:37.165Z,1478852197.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:37.534Z,1478852197.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:37.570Z,1478852197.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:37.938Z,1478852197.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:37.953Z,1478852197.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:38.336Z,1478852198.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:38.351Z,1478852198.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:38.741Z,1478852198.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:38.756Z,1478852198.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:39.138Z,1478852199.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:39.165Z,1478852199.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:39.537Z,1478852199.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:39.552Z,1478852199.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:39.945Z,1478852199.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:39.960Z,1478852199.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:40.329Z,1478852200.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:40.361Z,1478852200.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:40.733Z,1478852200.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:40.770Z,1478852200.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:41.129Z,1478852201.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:41.166Z,1478852201.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:41.529Z,1478852201.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:41.568Z,1478852201.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:41.929Z,1478852201.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:42.001Z,1478852202.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:42.329Z,1478852202.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:42.373Z,1478852202.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:42.729Z,1478852202.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:42.781Z,1478852202.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:43.129Z,1478852203.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:43.145Z,1478852203.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:43.529Z,1478852203.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:43.586Z,1478852203.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:43.932Z,1478852203.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:43.982Z,1478852203.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:44.329Z,1478852204.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:44.360Z,1478852204.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:44.735Z,1478852204.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:44.757Z,1478852204.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:45.136Z,1478852205.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:45.151Z,1478852205.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:45.536Z,1478852205.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:45.551Z,1478852205.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:45.936Z,1478852205.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:45.957Z,1478852205.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:46.329Z,1478852206.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:46.362Z,1478852206.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:46.729Z,1478852206.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:46.757Z,1478852206.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:47.129Z,1478852207.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:47.162Z,1478852207.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:47.533Z,1478852207.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:47.567Z,1478852207.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:47.929Z,1478852207.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:47.954Z,1478852207.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:48.329Z,1478852208.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:48.362Z,1478852208.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:48.729Z,1478852208.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:48.762Z,1478852208.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:49.129Z,1478852209.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:49.154Z,1478852209.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:49.529Z,1478852209.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:49.562Z,1478852209.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:49.929Z,1478852209.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:49.962Z,1478852209.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:50.329Z,1478852210.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:50.365Z,1478852210.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:50.729Z,1478852210.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:50.764Z,1478852210.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:51.129Z,1478852211.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:51.160Z,1478852211.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:51.529Z,1478852211.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:51.561Z,1478852211.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:51.929Z,1478852211.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:51.960Z,1478852211.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:52.336Z,1478852212.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:52.351Z,1478852212.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:52.733Z,1478852212.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:52.753Z,1478852212.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:53.129Z,1478852213.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:53.149Z,1478852213.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:53.532Z,1478852213.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:53.547Z,1478852213.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:53.932Z,1478852213.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:53.956Z,1478852213.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:54.336Z,1478852214.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:54.357Z,1478852214.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:54.732Z,1478852214.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:54.755Z,1478852214.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:55.135Z,1478852215.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:55.154Z,1478852215.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:55.536Z,1478852215.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:55.550Z,1478852215.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:55.940Z,1478852215.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:55.955Z,1478852215.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:56.337Z,1478852216.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:56.405Z,1478852216.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:56.744Z,1478852216.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:56.765Z,1478852216.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:57.129Z,1478852217.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:57.178Z,1478852217.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:57.544Z,1478852217.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:57.560Z,1478852217.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:57.937Z,1478852217.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:57.986Z,1478852217.986 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:57.986Z,1478852217.986 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2016-11-11T08:16:57.986Z,1478852217.986 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:16:58.010Z,1478852218.010 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:58.011Z,1478852218.011 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 50
2016-11-11T08:16:58.011Z,1478852218.011 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:16:58.020Z,1478852218.020 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:58.020Z,1478852218.020 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 50
2016-11-11T08:16:58.020Z,1478852218.020 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:16:58.045Z,1478852218.045 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:16:58.045Z,1478852218.045 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:16:58.045Z,1478852218.046 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:16:58.329Z,1478852218.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:58.386Z,1478852218.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:16:58.387Z,1478852218.386 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2016-11-11T08:16:58.387Z,1478852218.387 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:16:58.387Z,1478852218.387 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 50
2016-11-11T08:16:58.388Z,1478852218.388 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:16:58.388Z,1478852218.388 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 50
2016-11-11T08:16:58.729Z,1478852218.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:58.764Z,1478852218.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:16:58.764Z,1478852218.764 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:16:58.765Z,1478852218.765 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:16:58.769Z,1478852218.769 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:16:58.770Z,1478852218.770 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:16:58.770Z,1478852218.770 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:16:58.771Z,1478852218.771 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:16:58.775Z,1478852218.775 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:16:58.776Z,1478852218.776 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:16:59.131Z,1478852219.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:59.162Z,1478852219.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:16:59.163Z,1478852219.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:59.537Z,1478852219.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:59.557Z,1478852219.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:16:59.558Z,1478852219.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:16:59.929Z,1478852219.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:16:59.963Z,1478852219.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:16:59.964Z,1478852219.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:00.344Z,1478852220.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:00.364Z,1478852220.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:17:00.365Z,1478852220.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:00.729Z,1478852220.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:00.753Z,1478852220.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:17:00.754Z,1478852220.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:01.129Z,1478852221.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:01.160Z,1478852221.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T08:17:01.161Z,1478852221.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:01.529Z,1478852221.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:01.561Z,1478852221.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T08:17:01.562Z,1478852221.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:01.929Z,1478852221.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:01.955Z,1478852221.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T08:17:01.956Z,1478852221.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:02.329Z,1478852222.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:02.344Z,1478852222.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T08:17:02.345Z,1478852222.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:02.733Z,1478852222.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:02.769Z,1478852222.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T08:17:02.770Z,1478852222.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:03.136Z,1478852223.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:03.150Z,1478852223.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T08:17:03.151Z,1478852223.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:03.535Z,1478852223.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:03.550Z,1478852223.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T08:17:03.551Z,1478852223.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:03.941Z,1478852223.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:03.956Z,1478852223.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T08:17:03.956Z,1478852223.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:04.336Z,1478852224.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:04.350Z,1478852224.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T08:17:04.351Z,1478852224.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:04.736Z,1478852224.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:04.751Z,1478852224.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T08:17:04.752Z,1478852224.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:05.144Z,1478852225.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:05.165Z,1478852225.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T08:17:05.166Z,1478852225.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:05.540Z,1478852225.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:05.555Z,1478852225.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T08:17:05.556Z,1478852225.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:05.933Z,1478852225.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:05.969Z,1478852225.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T08:17:05.970Z,1478852225.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:06.329Z,1478852226.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:06.361Z,1478852226.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T08:17:06.362Z,1478852226.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:06.729Z,1478852226.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:06.765Z,1478852226.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T08:17:06.766Z,1478852226.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:07.129Z,1478852227.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:07.165Z,1478852227.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T08:17:07.166Z,1478852227.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:07.530Z,1478852227.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:07.564Z,1478852227.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T08:17:07.565Z,1478852227.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:07.929Z,1478852227.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:07.964Z,1478852227.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T08:17:07.965Z,1478852227.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:08.329Z,1478852228.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:08.364Z,1478852228.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T08:17:08.365Z,1478852228.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:08.733Z,1478852228.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:08.765Z,1478852228.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T08:17:08.766Z,1478852228.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:09.129Z,1478852229.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:09.165Z,1478852229.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T08:17:09.166Z,1478852229.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:09.532Z,1478852229.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:09.547Z,1478852229.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T08:17:09.548Z,1478852229.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:09.933Z,1478852229.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:09.947Z,1478852229.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T08:17:09.948Z,1478852229.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:10.332Z,1478852230.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:10.396Z,1478852230.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T08:17:10.398Z,1478852230.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:10.735Z,1478852230.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:10.785Z,1478852230.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T08:17:10.786Z,1478852230.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:11.143Z,1478852231.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:11.158Z,1478852231.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T08:17:11.159Z,1478852231.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:11.538Z,1478852231.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:11.556Z,1478852231.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T08:17:11.557Z,1478852231.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:14.795Z,1478852234.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:14.846Z,1478852234.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2016-11-11T08:17:14.848Z,1478852234.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:14.948Z,1478852234.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:14.977Z,1478852234.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2016-11-11T08:17:14.978Z,1478852234.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:15.304Z,1478852235.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:15.357Z,1478852235.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2016-11-11T08:17:15.358Z,1478852235.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:15.709Z,1478852235.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:15.730Z,1478852235.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2016-11-11T08:17:15.731Z,1478852235.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:16.105Z,1478852236.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:16.186Z,1478852236.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2016-11-11T08:17:16.188Z,1478852236.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:16.497Z,1478852236.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:16.544Z,1478852236.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2016-11-11T08:17:16.545Z,1478852236.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:16.897Z,1478852236.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:16.927Z,1478852236.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2016-11-11T08:17:16.928Z,1478852236.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:17.301Z,1478852237.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:17.330Z,1478852237.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2016-11-11T08:17:17.331Z,1478852237.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:17.697Z,1478852237.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:17.746Z,1478852237.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2016-11-11T08:17:17.747Z,1478852237.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:18.097Z,1478852238.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:18.134Z,1478852238.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:18.501Z,1478852238.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:18.533Z,1478852238.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:18.897Z,1478852238.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:18.938Z,1478852238.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:19.297Z,1478852239.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:19.336Z,1478852239.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:19.697Z,1478852239.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:19.782Z,1478852239.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:20.097Z,1478852240.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:20.112Z,1478852240.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:20.497Z,1478852240.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:20.533Z,1478852240.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:20.908Z,1478852240.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:20.952Z,1478852240.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:21.304Z,1478852241.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:21.385Z,1478852241.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:21.697Z,1478852241.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:21.731Z,1478852241.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:22.101Z,1478852242.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:22.137Z,1478852242.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:22.497Z,1478852242.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:22.535Z,1478852242.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:22.897Z,1478852242.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:22.934Z,1478852242.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:23.297Z,1478852243.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:23.329Z,1478852243.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:23.697Z,1478852243.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:23.724Z,1478852243.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:24.101Z,1478852244.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:24.131Z,1478852244.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:24.501Z,1478852244.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:24.535Z,1478852244.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:24.900Z,1478852244.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:24.919Z,1478852244.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:25.301Z,1478852245.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:25.318Z,1478852245.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:25.705Z,1478852245.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:25.722Z,1478852245.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:26.104Z,1478852246.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:26.121Z,1478852246.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:26.504Z,1478852246.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:26.521Z,1478852246.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:26.909Z,1478852246.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:26.940Z,1478852246.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:27.304Z,1478852247.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:27.321Z,1478852247.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:27.704Z,1478852247.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:27.735Z,1478852247.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:28.101Z,1478852248.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:28.187Z,1478852248.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:28.497Z,1478852248.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:28.522Z,1478852248.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:28.897Z,1478852248.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:28.953Z,1478852248.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:29.305Z,1478852249.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:29.322Z,1478852249.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:29.705Z,1478852249.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:29.751Z,1478852249.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:30.106Z,1478852250.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:30.155Z,1478852250.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:30.505Z,1478852250.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:30.522Z,1478852250.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:30.904Z,1478852250.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:30.921Z,1478852250.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:31.306Z,1478852251.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:31.323Z,1478852251.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:31.709Z,1478852251.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:31.733Z,1478852251.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:32.105Z,1478852252.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:32.127Z,1478852252.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:32.497Z,1478852252.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:32.581Z,1478852252.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:32.896Z,1478852252.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:32.949Z,1478852252.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:33.302Z,1478852253.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:33.321Z,1478852253.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:33.703Z,1478852253.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:33.734Z,1478852253.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:34.097Z,1478852254.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:34.141Z,1478852254.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:34.497Z,1478852254.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:34.529Z,1478852254.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:34.897Z,1478852254.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:34.923Z,1478852254.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:35.297Z,1478852255.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:35.345Z,1478852255.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:35.697Z,1478852255.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:35.745Z,1478852255.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:36.101Z,1478852256.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:36.148Z,1478852256.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:36.504Z,1478852256.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:36.525Z,1478852256.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:36.904Z,1478852256.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:36.928Z,1478852256.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:37.324Z,1478852257.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:37.341Z,1478852257.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:37.700Z,1478852257.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:37.766Z,1478852257.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:38.097Z,1478852258.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:38.129Z,1478852258.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:38.497Z,1478852258.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:38.537Z,1478852258.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:38.897Z,1478852258.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:38.937Z,1478852258.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:39.297Z,1478852259.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:39.319Z,1478852259.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:39.697Z,1478852259.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:39.721Z,1478852259.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:40.100Z,1478852260.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:40.117Z,1478852260.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:40.504Z,1478852260.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:40.521Z,1478852260.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:40.903Z,1478852260.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:40.920Z,1478852260.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:41.303Z,1478852261.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:41.333Z,1478852261.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:41.705Z,1478852261.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:41.733Z,1478852261.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:42.108Z,1478852262.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:42.175Z,1478852262.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:42.497Z,1478852262.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:42.557Z,1478852262.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:42.897Z,1478852262.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:42.919Z,1478852262.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:43.297Z,1478852263.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:43.353Z,1478852263.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:43.702Z,1478852263.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:43.731Z,1478852263.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:44.101Z,1478852264.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:44.147Z,1478852264.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:44.502Z,1478852264.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:44.556Z,1478852264.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:44.900Z,1478852264.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:44.919Z,1478852264.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:45.304Z,1478852265.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:45.321Z,1478852265.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:45.703Z,1478852265.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:45.721Z,1478852265.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:46.106Z,1478852266.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:46.124Z,1478852266.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:46.504Z,1478852266.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:46.525Z,1478852266.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:46.904Z,1478852266.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:46.922Z,1478852266.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:47.297Z,1478852267.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:47.331Z,1478852267.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:47.697Z,1478852267.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:47.731Z,1478852267.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:48.097Z,1478852268.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:48.136Z,1478852268.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:48.497Z,1478852268.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:48.529Z,1478852268.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:48.897Z,1478852268.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:48.962Z,1478852268.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:49.302Z,1478852269.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:49.338Z,1478852269.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:49.704Z,1478852269.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:49.721Z,1478852269.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:50.104Z,1478852270.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:50.123Z,1478852270.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:50.503Z,1478852270.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:50.522Z,1478852270.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:50.904Z,1478852270.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:50.926Z,1478852270.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:51.308Z,1478852271.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:51.325Z,1478852271.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:51.708Z,1478852271.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:51.726Z,1478852271.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:52.097Z,1478852272.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:52.139Z,1478852272.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:52.501Z,1478852272.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:52.541Z,1478852272.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:52.901Z,1478852272.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:52.973Z,1478852272.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:53.297Z,1478852273.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:53.337Z,1478852273.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:53.697Z,1478852273.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:53.740Z,1478852273.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:54.101Z,1478852274.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:54.142Z,1478852274.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:54.503Z,1478852274.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:54.577Z,1478852274.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:54.904Z,1478852274.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:54.964Z,1478852274.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:55.303Z,1478852275.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:55.350Z,1478852275.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:55.706Z,1478852275.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:55.770Z,1478852275.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:56.127Z,1478852276.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:56.169Z,1478852276.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:56.499Z,1478852276.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:56.597Z,1478852276.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:56.899Z,1478852276.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:56.959Z,1478852276.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:57.308Z,1478852277.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:57.373Z,1478852277.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:57.705Z,1478852277.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:57.761Z,1478852277.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:58.109Z,1478852278.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:58.169Z,1478852278.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:58.517Z,1478852278.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:58.581Z,1478852278.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:58.906Z,1478852278.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:58.956Z,1478852278.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:59.299Z,1478852279.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:59.373Z,1478852279.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:17:59.700Z,1478852279.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:17:59.754Z,1478852279.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:00.099Z,1478852280.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:00.119Z,1478852280.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:00.502Z,1478852280.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:00.527Z,1478852280.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:00.906Z,1478852280.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:00.941Z,1478852280.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:01.305Z,1478852281.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:01.337Z,1478852281.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:01.699Z,1478852281.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:01.746Z,1478852281.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:02.105Z,1478852282.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:02.165Z,1478852282.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:02.507Z,1478852282.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:02.544Z,1478852282.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:02.900Z,1478852282.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:02.955Z,1478852282.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:03.305Z,1478852283.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:03.353Z,1478852283.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:03.703Z,1478852283.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:03.726Z,1478852283.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:04.105Z,1478852284.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:04.125Z,1478852284.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:04.522Z,1478852284.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:04.557Z,1478852284.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:04.904Z,1478852284.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:04.922Z,1478852284.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:05.304Z,1478852285.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:05.329Z,1478852285.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:05.752Z,1478852285.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:05.798Z,1478852285.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:06.099Z,1478852286.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:06.137Z,1478852286.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:06.515Z,1478852286.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:06.534Z,1478852286.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:06.901Z,1478852286.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:06.965Z,1478852286.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:07.297Z,1478852287.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:07.337Z,1478852287.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:07.739Z,1478852287.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:07.745Z,1478852287.745 [PNI_TCM](ERROR): CRC does not match. Expected:0x23305 got:0x34133
2016-11-11T08:18:07.769Z,1478852287.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:08.108Z,1478852288.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:08.149Z,1478852288.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:08.506Z,1478852288.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:08.518Z,1478852288.518 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2016-11-11T08:18:08.557Z,1478852288.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:08.910Z,1478852288.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:08.959Z,1478852288.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:09.299Z,1478852289.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:09.366Z,1478852289.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:09.702Z,1478852289.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:09.745Z,1478852289.745 [PNI_TCM](ERROR): CRC does not match. Expected:0x35603 got:0x16384
2016-11-11T08:18:09.794Z,1478852289.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:10.097Z,1478852290.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:10.136Z,1478852290.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:10.511Z,1478852290.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:10.535Z,1478852290.535 [PNI_TCM](ERROR): CRC does not match. Expected:0x17781 got:0x362
2016-11-11T08:18:10.574Z,1478852290.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:10.899Z,1478852290.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:11.048Z,1478852291.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:11.300Z,1478852291.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:11.345Z,1478852291.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:11.699Z,1478852291.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:11.769Z,1478852291.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:17.636Z,1478852297.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:17.653Z,1478852297.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:17.753Z,1478852297.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:17.777Z,1478852297.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:18.143Z,1478852298.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:18.174Z,1478852298.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:18.539Z,1478852298.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:18.594Z,1478852298.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:18.944Z,1478852298.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:18.964Z,1478852298.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:19.344Z,1478852299.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:19.382Z,1478852299.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:19.733Z,1478852299.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:19.789Z,1478852299.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:20.133Z,1478852300.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:20.165Z,1478852300.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:20.536Z,1478852300.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:20.571Z,1478852300.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:20.931Z,1478852300.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:20.967Z,1478852300.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:21.331Z,1478852301.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:21.377Z,1478852301.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:21.731Z,1478852301.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:21.747Z,1478852301.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:22.140Z,1478852302.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:22.163Z,1478852302.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:22.578Z,1478852302.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:22.602Z,1478852302.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:22.942Z,1478852302.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:22.987Z,1478852302.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:23.339Z,1478852303.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:23.354Z,1478852303.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:23.741Z,1478852303.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:23.756Z,1478852303.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:24.141Z,1478852304.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:24.155Z,1478852304.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:24.545Z,1478852304.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:24.560Z,1478852304.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:24.939Z,1478852304.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:24.965Z,1478852304.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:25.341Z,1478852305.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:25.355Z,1478852305.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:25.746Z,1478852305.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:25.764Z,1478852305.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:26.149Z,1478852306.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:26.169Z,1478852306.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:26.568Z,1478852306.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:26.606Z,1478852306.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:26.932Z,1478852306.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:26.965Z,1478852306.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:27.338Z,1478852307.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:27.374Z,1478852307.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:27.753Z,1478852307.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:27.768Z,1478852307.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:28.178Z,1478852308.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:28.214Z,1478852308.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:28.540Z,1478852308.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:28.574Z,1478852308.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:28.934Z,1478852308.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:28.970Z,1478852308.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:29.337Z,1478852309.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:29.352Z,1478852309.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:29.737Z,1478852309.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:29.752Z,1478852309.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:30.141Z,1478852310.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:30.161Z,1478852310.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:30.541Z,1478852310.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:30.556Z,1478852310.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:30.941Z,1478852310.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:30.961Z,1478852310.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:31.339Z,1478852311.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:31.354Z,1478852311.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:31.739Z,1478852311.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:31.809Z,1478852311.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:32.144Z,1478852312.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:32.168Z,1478852312.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:32.533Z,1478852312.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:32.581Z,1478852312.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:32.931Z,1478852312.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:32.962Z,1478852312.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:33.331Z,1478852313.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:33.378Z,1478852313.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:33.733Z,1478852313.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:33.781Z,1478852313.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:34.131Z,1478852314.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:34.158Z,1478852314.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:34.533Z,1478852314.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:34.568Z,1478852314.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:34.934Z,1478852314.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:34.979Z,1478852314.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:35.331Z,1478852315.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:35.346Z,1478852315.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:35.733Z,1478852315.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:35.748Z,1478852315.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:36.135Z,1478852316.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:36.150Z,1478852316.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:36.537Z,1478852316.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:36.552Z,1478852316.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:36.937Z,1478852316.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:36.951Z,1478852316.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:37.335Z,1478852317.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:37.361Z,1478852317.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:37.738Z,1478852317.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:37.754Z,1478852317.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:38.139Z,1478852318.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:38.168Z,1478852318.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:38.531Z,1478852318.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:38.557Z,1478852318.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:38.943Z,1478852318.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:38.958Z,1478852318.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:39.376Z,1478852319.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:39.413Z,1478852319.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:39.749Z,1478852319.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:39.768Z,1478852319.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:40.132Z,1478852320.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:40.160Z,1478852320.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:40.533Z,1478852320.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:40.569Z,1478852320.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:40.934Z,1478852320.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:40.972Z,1478852320.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:41.341Z,1478852321.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:41.371Z,1478852321.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:41.733Z,1478852321.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:41.750Z,1478852321.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:42.134Z,1478852322.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:42.157Z,1478852322.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:42.541Z,1478852322.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:42.561Z,1478852322.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:42.940Z,1478852322.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:42.954Z,1478852322.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:43.362Z,1478852323.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:43.386Z,1478852323.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:43.730Z,1478852323.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:43.745Z,1478852323.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:44.141Z,1478852324.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:44.156Z,1478852324.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:44.542Z,1478852324.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:44.557Z,1478852324.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:44.962Z,1478852324.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:44.989Z,1478852324.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:45.333Z,1478852325.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:45.349Z,1478852325.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:45.731Z,1478852325.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:45.773Z,1478852325.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:46.134Z,1478852326.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:46.177Z,1478852326.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:46.531Z,1478852326.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:46.546Z,1478852326.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:46.934Z,1478852326.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:46.977Z,1478852326.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:47.331Z,1478852327.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:47.346Z,1478852327.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:47.731Z,1478852327.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:47.770Z,1478852327.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:48.134Z,1478852328.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:48.177Z,1478852328.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:48.531Z,1478852328.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:48.546Z,1478852328.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:48.932Z,1478852328.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:48.982Z,1478852328.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:49.331Z,1478852329.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:49.346Z,1478852329.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:49.731Z,1478852329.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:49.746Z,1478852329.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:50.131Z,1478852330.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:50.146Z,1478852330.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:50.531Z,1478852330.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:50.553Z,1478852330.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:50.932Z,1478852330.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:50.947Z,1478852330.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:51.332Z,1478852331.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:51.347Z,1478852331.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:51.732Z,1478852331.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:51.747Z,1478852331.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:52.132Z,1478852332.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:52.147Z,1478852332.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:52.532Z,1478852332.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:52.547Z,1478852332.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:52.929Z,1478852332.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:52.944Z,1478852332.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:53.332Z,1478852333.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:53.376Z,1478852333.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:53.731Z,1478852333.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:53.747Z,1478852333.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:54.128Z,1478852334.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:54.144Z,1478852334.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:54.531Z,1478852334.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:54.547Z,1478852334.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:54.931Z,1478852334.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:54.946Z,1478852334.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:55.328Z,1478852335.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:55.343Z,1478852335.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:55.735Z,1478852335.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:55.750Z,1478852335.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:56.175Z,1478852336.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:56.205Z,1478852336.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:56.542Z,1478852336.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:56.570Z,1478852336.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:56.933Z,1478852336.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:56.953Z,1478852336.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:57.333Z,1478852337.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:57.348Z,1478852337.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:57.733Z,1478852337.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:57.748Z,1478852337.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:58.137Z,1478852338.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:58.152Z,1478852338.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:58.531Z,1478852338.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:58.553Z,1478852338.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:58.931Z,1478852338.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:58.946Z,1478852338.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:59.338Z,1478852339.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:59.354Z,1478852339.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:59.741Z,1478852339.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:18:59.749Z,1478852339.749 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T08:18:59.749Z,1478852339.750 [BPC1] Data Fault, FailCount= 1
2016-11-11T08:18:59.750Z,1478852339.750 [BPC1](ERROR): Data Fault
2016-11-11T08:18:59.757Z,1478852339.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:18:59.777Z,1478852339.777 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T08:19:00.162Z,1478852340.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:00.190Z,1478852340.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:00.533Z,1478852340.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:00.561Z,1478852340.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:00.938Z,1478852340.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:00.969Z,1478852340.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:00.998Z,1478852340.998 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:19:00.998Z,1478852340.998 [BPC1] No Fault, FailCount= 1
2016-11-11T08:19:01.342Z,1478852341.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:01.429Z,1478852341.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:01.757Z,1478852341.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:01.813Z,1478852341.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:02.149Z,1478852342.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:02.172Z,1478852342.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:02.531Z,1478852342.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:02.561Z,1478852342.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:02.935Z,1478852342.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:02.950Z,1478852342.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:03.331Z,1478852343.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:03.357Z,1478852343.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:03.734Z,1478852343.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:03.753Z,1478852343.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:04.131Z,1478852344.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:04.154Z,1478852344.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:04.530Z,1478852344.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:04.545Z,1478852344.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:04.931Z,1478852344.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:04.947Z,1478852344.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:05.337Z,1478852345.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:05.352Z,1478852345.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:05.737Z,1478852345.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:05.751Z,1478852345.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:06.138Z,1478852346.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:06.153Z,1478852346.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:06.539Z,1478852346.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:06.554Z,1478852346.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:06.941Z,1478852346.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:06.961Z,1478852346.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:07.338Z,1478852347.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:07.353Z,1478852347.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:07.740Z,1478852347.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:07.755Z,1478852347.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:08.140Z,1478852348.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:08.155Z,1478852348.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:08.540Z,1478852348.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:08.555Z,1478852348.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:08.931Z,1478852348.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:08.963Z,1478852348.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:09.333Z,1478852349.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:09.369Z,1478852349.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:09.733Z,1478852349.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:09.769Z,1478852349.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:10.133Z,1478852350.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:10.164Z,1478852350.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:10.533Z,1478852350.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:10.577Z,1478852350.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:10.586Z,1478852350.586 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T08:19:10.586Z,1478852350.586 [Default:CheckIn:C.Wait] Stopped
2016-11-11T08:19:10.586Z,1478852350.586 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T08:19:10.586Z,1478852350.586 [Default:CheckIn:D] Running Loop=1
2016-11-11T08:19:10.932Z,1478852350.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:10.947Z,1478852350.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:10.988Z,1478852350.988 [Default:CheckIn:D] Stopped
2016-11-11T08:19:10.988Z,1478852350.988 [Default:CheckIn:E] Running Loop=1
2016-11-11T08:19:11.333Z,1478852351.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:11.348Z,1478852351.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:11.374Z,1478852351.374 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 209.161296 min 
2016-11-11T08:19:11.374Z,1478852351.374 [Default:CheckIn:E] Stopped
2016-11-11T08:19:11.374Z,1478852351.374 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T08:19:11.374Z,1478852351.374 [Default:CheckIn] Stopped
2016-11-11T08:19:11.375Z,1478852351.375 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T08:19:11.375Z,1478852351.375 [Default:CheckIn](INFO): Running loop #21
2016-11-11T08:19:11.375Z,1478852351.375 [Default:CheckIn] Running Loop=21
2016-11-11T08:19:11.379Z,1478852351.379 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T08:19:11.379Z,1478852351.379 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T08:19:11.734Z,1478852351.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:11.749Z,1478852351.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:15.154Z,1478852355.154 [NAL9602](INFO): Powering up
2016-11-11T08:19:15.183Z,1478852355.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:15.277Z,1478852355.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:15.385Z,1478852355.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:15.408Z,1478852355.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:15.750Z,1478852355.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:15.799Z,1478852355.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:16.155Z,1478852356.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:16.170Z,1478852356.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:16.556Z,1478852356.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:16.605Z,1478852356.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:16.948Z,1478852356.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:16.994Z,1478852356.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:17.349Z,1478852357.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:17.386Z,1478852357.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:17.756Z,1478852357.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:17.772Z,1478852357.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:18.156Z,1478852358.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:18.189Z,1478852358.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:18.549Z,1478852358.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:18.584Z,1478852358.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:18.947Z,1478852358.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:18.962Z,1478852358.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:19.349Z,1478852359.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:19.376Z,1478852359.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:19.753Z,1478852359.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:19.773Z,1478852359.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:20.149Z,1478852360.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:20.165Z,1478852360.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:20.548Z,1478852360.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:20.574Z,1478852360.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:20.951Z,1478852360.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:20.985Z,1478852360.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:21.338Z,1478852361.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:21.377Z,1478852361.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:21.741Z,1478852361.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:21.775Z,1478852361.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:22.144Z,1478852362.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:22.178Z,1478852362.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:22.541Z,1478852362.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:22.577Z,1478852362.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:22.941Z,1478852362.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:22.973Z,1478852362.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:23.341Z,1478852363.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:23.373Z,1478852363.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:23.741Z,1478852363.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:23.768Z,1478852363.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:24.141Z,1478852364.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:24.177Z,1478852364.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:24.545Z,1478852364.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:24.578Z,1478852364.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:24.941Z,1478852364.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:24.981Z,1478852364.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:25.341Z,1478852365.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:25.381Z,1478852365.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:25.756Z,1478852365.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:25.784Z,1478852365.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:26.133Z,1478852366.133 [NAL9602](INFO): NAL9602 initialized
2016-11-11T08:19:26.150Z,1478852366.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:26.181Z,1478852366.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:26.545Z,1478852366.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:26.565Z,1478852366.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:26.964Z,1478852366.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:26.990Z,1478852366.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:27.356Z,1478852367.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:27.387Z,1478852367.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:27.752Z,1478852367.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:27.766Z,1478852367.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:28.150Z,1478852368.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:28.165Z,1478852368.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:28.544Z,1478852368.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:28.577Z,1478852368.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:28.950Z,1478852368.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:29.006Z,1478852369.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:29.369Z,1478852369.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:29.393Z,1478852369.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:29.741Z,1478852369.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:29.786Z,1478852369.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:30.141Z,1478852370.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:30.173Z,1478852370.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:30.550Z,1478852370.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:30.597Z,1478852370.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:30.942Z,1478852370.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:30.961Z,1478852370.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:31.350Z,1478852371.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:31.390Z,1478852371.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:31.750Z,1478852371.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:31.765Z,1478852371.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:32.146Z,1478852372.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:32.165Z,1478852372.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:32.551Z,1478852372.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:32.566Z,1478852372.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:32.978Z,1478852372.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:32.998Z,1478852372.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:33.361Z,1478852373.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:33.393Z,1478852373.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:33.741Z,1478852373.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:33.779Z,1478852373.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:34.146Z,1478852374.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:34.182Z,1478852374.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:34.550Z,1478852374.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:34.582Z,1478852374.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:34.978Z,1478852374.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:35.009Z,1478852375.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:35.345Z,1478852375.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:35.360Z,1478852375.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:35.746Z,1478852375.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:35.766Z,1478852375.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:36.150Z,1478852376.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:36.165Z,1478852376.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:36.550Z,1478852376.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:36.564Z,1478852376.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:36.944Z,1478852376.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:36.962Z,1478852376.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:37.349Z,1478852377.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:37.369Z,1478852377.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:37.741Z,1478852377.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:37.776Z,1478852377.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:38.141Z,1478852378.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:38.167Z,1478852378.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:38.541Z,1478852378.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:38.575Z,1478852378.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:38.943Z,1478852378.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:38.973Z,1478852378.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:39.341Z,1478852379.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:39.373Z,1478852379.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:39.749Z,1478852379.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:39.771Z,1478852379.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:40.146Z,1478852380.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:40.177Z,1478852380.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:40.541Z,1478852380.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:40.577Z,1478852380.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:40.945Z,1478852380.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:40.985Z,1478852380.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:41.345Z,1478852381.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:41.385Z,1478852381.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:41.749Z,1478852381.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:41.769Z,1478852381.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:42.148Z,1478852382.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:42.163Z,1478852382.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:42.548Z,1478852382.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:42.577Z,1478852382.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:42.945Z,1478852382.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:43.017Z,1478852383.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:43.341Z,1478852383.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:43.377Z,1478852383.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:43.742Z,1478852383.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:43.769Z,1478852383.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:44.146Z,1478852384.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:44.189Z,1478852384.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:44.547Z,1478852384.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:44.562Z,1478852384.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:44.946Z,1478852384.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:44.993Z,1478852384.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:45.345Z,1478852385.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:45.395Z,1478852385.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:45.745Z,1478852385.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:45.765Z,1478852385.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:46.157Z,1478852386.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:46.203Z,1478852386.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:46.541Z,1478852386.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:46.569Z,1478852386.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:46.944Z,1478852386.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:46.973Z,1478852386.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:47.348Z,1478852387.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:47.369Z,1478852387.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:47.744Z,1478852387.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:47.771Z,1478852387.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:48.153Z,1478852388.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:48.168Z,1478852388.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:48.551Z,1478852388.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:48.565Z,1478852388.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:48.944Z,1478852388.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:48.976Z,1478852388.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:49.353Z,1478852389.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:49.373Z,1478852389.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:49.754Z,1478852389.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:49.769Z,1478852389.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:50.164Z,1478852390.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:50.191Z,1478852390.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:50.541Z,1478852390.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:50.577Z,1478852390.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:50.947Z,1478852390.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:50.982Z,1478852390.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:51.350Z,1478852391.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:51.386Z,1478852391.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:51.754Z,1478852391.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:51.789Z,1478852391.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:52.151Z,1478852392.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:52.178Z,1478852392.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:52.544Z,1478852392.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:52.572Z,1478852392.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:52.950Z,1478852392.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:52.969Z,1478852392.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:53.350Z,1478852393.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:53.365Z,1478852393.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:53.744Z,1478852393.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:53.777Z,1478852393.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:54.153Z,1478852394.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:54.173Z,1478852394.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:54.541Z,1478852394.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:54.573Z,1478852394.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:54.946Z,1478852394.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:54.971Z,1478852394.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:55.341Z,1478852395.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:55.377Z,1478852395.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:55.742Z,1478852395.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:55.772Z,1478852395.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:56.145Z,1478852396.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:56.181Z,1478852396.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:56.545Z,1478852396.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:56.565Z,1478852396.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:56.950Z,1478852396.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:56.965Z,1478852396.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:57.349Z,1478852397.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:57.405Z,1478852397.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:57.756Z,1478852397.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:57.814Z,1478852397.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:58.125Z,1478852398.125 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-11T08:19:58.199Z,1478852398.199 [NAL9602](FAULT): received: 
+CSQ:0

OK0, 2, 0, 0, 0

OK
2016-11-11T08:19:58.199Z,1478852398.199 [NAL9602] Data Fault, FailCount= 1
2016-11-11T08:19:58.199Z,1478852398.199 [NAL9602](ERROR): Data Fault
2016-11-11T08:19:58.216Z,1478852398.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:58.231Z,1478852398.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:58.276Z,1478852398.276 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T08:19:58.525Z,1478852398.524 [NAL9602](INFO): Powering down
2016-11-11T08:19:58.542Z,1478852398.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:58.585Z,1478852398.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:58.941Z,1478852398.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:58.989Z,1478852398.989 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:58.989Z,1478852398.989 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2016-11-11T08:19:58.989Z,1478852398.989 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:19:58.996Z,1478852398.996 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:58.996Z,1478852398.996 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 51
2016-11-11T08:19:58.996Z,1478852398.996 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:19:58.998Z,1478852398.998 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:19:58.998Z,1478852398.998 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 51
2016-11-11T08:19:58.998Z,1478852398.998 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:19:59.033Z,1478852399.033 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:19:59.033Z,1478852399.033 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:19:59.034Z,1478852399.034 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:19:59.341Z,1478852399.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:59.403Z,1478852399.403 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:19:59.403Z,1478852399.403 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2016-11-11T08:19:59.403Z,1478852399.404 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:19:59.404Z,1478852399.404 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 51
2016-11-11T08:19:59.404Z,1478852399.404 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:19:59.404Z,1478852399.404 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 51
2016-11-11T08:19:59.405Z,1478852399.405 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T08:19:59.405Z,1478852399.405 [NAL9602] No Fault, FailCount= 1
2016-11-11T08:19:59.741Z,1478852399.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:19:59.788Z,1478852399.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:19:59.789Z,1478852399.789 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:19:59.789Z,1478852399.789 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:19:59.794Z,1478852399.794 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:19:59.794Z,1478852399.794 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:19:59.795Z,1478852399.795 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:19:59.795Z,1478852399.795 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:19:59.796Z,1478852399.796 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:19:59.796Z,1478852399.796 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:20:00.141Z,1478852400.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:00.172Z,1478852400.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:20:00.174Z,1478852400.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:00.548Z,1478852400.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:00.598Z,1478852400.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:20:00.599Z,1478852400.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:00.945Z,1478852400.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:00.977Z,1478852400.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:20:00.978Z,1478852400.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:01.348Z,1478852401.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:01.363Z,1478852401.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:20:01.364Z,1478852401.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:01.751Z,1478852401.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:01.774Z,1478852401.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:20:01.775Z,1478852401.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:02.148Z,1478852402.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:02.175Z,1478852402.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T08:20:02.176Z,1478852402.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:02.541Z,1478852402.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:02.566Z,1478852402.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T08:20:02.567Z,1478852402.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:02.960Z,1478852402.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:02.989Z,1478852402.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T08:20:02.990Z,1478852402.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:03.368Z,1478852403.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:03.391Z,1478852403.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T08:20:03.392Z,1478852403.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:03.725Z,1478852403.725 [NAL9602](INFO): Powering up NAL9602
2016-11-11T08:20:03.742Z,1478852403.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:03.787Z,1478852403.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T08:20:03.788Z,1478852403.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:04.141Z,1478852404.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:04.155Z,1478852404.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T08:20:04.156Z,1478852404.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:04.542Z,1478852404.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:04.557Z,1478852404.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T08:20:04.558Z,1478852404.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:04.949Z,1478852404.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:04.963Z,1478852404.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T08:20:04.964Z,1478852404.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:05.341Z,1478852405.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:05.355Z,1478852405.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T08:20:05.356Z,1478852405.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:05.749Z,1478852405.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:05.769Z,1478852405.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T08:20:05.770Z,1478852405.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:06.149Z,1478852406.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:06.168Z,1478852406.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T08:20:06.169Z,1478852406.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:06.554Z,1478852406.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:06.572Z,1478852406.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T08:20:06.573Z,1478852406.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:06.969Z,1478852406.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:07.004Z,1478852407.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T08:20:07.005Z,1478852407.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:07.344Z,1478852407.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:07.375Z,1478852407.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T08:20:07.376Z,1478852407.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:07.755Z,1478852407.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:07.770Z,1478852407.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T08:20:07.771Z,1478852407.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:08.156Z,1478852408.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:08.180Z,1478852408.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T08:20:08.181Z,1478852408.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:08.561Z,1478852408.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:08.589Z,1478852408.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T08:20:08.590Z,1478852408.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:08.950Z,1478852408.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:08.975Z,1478852408.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T08:20:08.976Z,1478852408.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:09.355Z,1478852409.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:09.374Z,1478852409.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T08:20:09.376Z,1478852409.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:09.750Z,1478852409.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:09.765Z,1478852409.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T08:20:09.766Z,1478852409.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:10.151Z,1478852410.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:10.181Z,1478852410.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T08:20:10.182Z,1478852410.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:10.542Z,1478852410.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:10.573Z,1478852410.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T08:20:10.574Z,1478852410.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:10.942Z,1478852410.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:10.984Z,1478852410.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T08:20:10.986Z,1478852410.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:11.346Z,1478852411.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:11.385Z,1478852411.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T08:20:11.386Z,1478852411.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:11.742Z,1478852411.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:11.785Z,1478852411.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T08:20:11.786Z,1478852411.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:14.993Z,1478852414.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:15.080Z,1478852415.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2016-11-11T08:20:15.081Z,1478852415.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:15.172Z,1478852415.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:15.201Z,1478852415.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2016-11-11T08:20:15.202Z,1478852415.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:15.552Z,1478852415.552 [NAL9602](INFO): NAL9602 initialized
2016-11-11T08:20:15.569Z,1478852415.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:15.589Z,1478852415.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2016-11-11T08:20:15.590Z,1478852415.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:15.969Z,1478852415.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:16.015Z,1478852416.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2016-11-11T08:20:16.016Z,1478852416.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:16.385Z,1478852416.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:16.417Z,1478852416.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2016-11-11T08:20:16.418Z,1478852416.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:16.784Z,1478852416.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:16.829Z,1478852416.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2016-11-11T08:20:16.830Z,1478852416.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:17.176Z,1478852417.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:17.220Z,1478852417.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2016-11-11T08:20:17.221Z,1478852417.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:17.567Z,1478852417.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:17.582Z,1478852417.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2016-11-11T08:20:17.583Z,1478852417.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:17.965Z,1478852417.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:17.988Z,1478852417.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2016-11-11T08:20:17.989Z,1478852417.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:18.371Z,1478852418.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:18.385Z,1478852418.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2016-11-11T08:20:18.386Z,1478852418.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:18.774Z,1478852418.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:18.805Z,1478852418.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2016-11-11T08:20:18.806Z,1478852418.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:19.180Z,1478852419.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:19.208Z,1478852419.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:19.583Z,1478852419.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:19.598Z,1478852419.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:19.961Z,1478852419.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:19.986Z,1478852419.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:20.377Z,1478852420.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:20.393Z,1478852420.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:20.761Z,1478852420.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:20.801Z,1478852420.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:21.161Z,1478852421.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:21.193Z,1478852421.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:21.561Z,1478852421.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:21.589Z,1478852421.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:21.963Z,1478852421.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:22.000Z,1478852422.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:22.361Z,1478852422.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:22.397Z,1478852422.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:22.765Z,1478852422.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:22.797Z,1478852422.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:23.185Z,1478852423.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:23.200Z,1478852423.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:23.572Z,1478852423.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:23.605Z,1478852423.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:23.965Z,1478852423.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:23.997Z,1478852423.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:24.366Z,1478852424.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:24.393Z,1478852424.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:24.766Z,1478852424.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:24.785Z,1478852424.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:25.166Z,1478852425.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:25.182Z,1478852425.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:25.569Z,1478852425.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:25.583Z,1478852425.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:25.965Z,1478852425.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:25.988Z,1478852425.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:26.369Z,1478852426.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:26.384Z,1478852426.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:26.780Z,1478852426.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:26.797Z,1478852426.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:27.179Z,1478852427.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:27.194Z,1478852427.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:27.570Z,1478852427.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:27.591Z,1478852427.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:27.961Z,1478852427.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:27.993Z,1478852427.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:28.361Z,1478852428.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:28.397Z,1478852428.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:28.761Z,1478852428.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:28.789Z,1478852428.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:29.166Z,1478852429.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:29.236Z,1478852429.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:29.564Z,1478852429.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:29.598Z,1478852429.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:29.969Z,1478852429.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:30.028Z,1478852430.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:30.361Z,1478852430.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:30.394Z,1478852430.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:30.761Z,1478852430.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:30.826Z,1478852430.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:31.161Z,1478852431.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:31.226Z,1478852431.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:31.561Z,1478852431.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:31.597Z,1478852431.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:31.962Z,1478852431.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:31.998Z,1478852431.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:32.380Z,1478852432.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:32.405Z,1478852432.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:32.780Z,1478852432.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:32.811Z,1478852432.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:33.161Z,1478852433.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:33.197Z,1478852433.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:33.561Z,1478852433.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:33.601Z,1478852433.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:33.962Z,1478852433.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:33.978Z,1478852433.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:34.361Z,1478852434.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:34.382Z,1478852434.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:34.780Z,1478852434.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:34.813Z,1478852434.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:35.165Z,1478852435.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:35.185Z,1478852435.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:35.567Z,1478852435.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:35.582Z,1478852435.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:35.968Z,1478852435.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:35.989Z,1478852435.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:36.369Z,1478852436.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:36.389Z,1478852436.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:36.778Z,1478852436.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:36.802Z,1478852436.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:37.179Z,1478852437.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:37.201Z,1478852437.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:37.561Z,1478852437.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:37.594Z,1478852437.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:37.961Z,1478852437.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:37.993Z,1478852437.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:38.361Z,1478852438.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:38.386Z,1478852438.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:38.778Z,1478852438.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:38.793Z,1478852438.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:39.165Z,1478852439.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:39.191Z,1478852439.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:39.569Z,1478852439.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:39.610Z,1478852439.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:39.962Z,1478852439.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:39.995Z,1478852439.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:40.361Z,1478852440.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:40.393Z,1478852440.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:40.780Z,1478852440.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:40.801Z,1478852440.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:41.184Z,1478852441.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:41.209Z,1478852441.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:41.565Z,1478852441.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:41.605Z,1478852441.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:41.961Z,1478852441.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:41.976Z,1478852441.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:42.368Z,1478852442.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:42.389Z,1478852442.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:42.762Z,1478852442.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:42.777Z,1478852442.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:43.169Z,1478852443.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:43.245Z,1478852443.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:43.569Z,1478852443.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:43.584Z,1478852443.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:43.964Z,1478852443.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:43.992Z,1478852443.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:44.368Z,1478852444.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:44.426Z,1478852444.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:44.770Z,1478852444.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:44.789Z,1478852444.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:45.164Z,1478852445.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:45.219Z,1478852445.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:45.561Z,1478852445.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:45.610Z,1478852445.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:45.961Z,1478852445.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:45.996Z,1478852445.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:46.361Z,1478852446.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:46.393Z,1478852446.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:46.772Z,1478852446.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:46.787Z,1478852446.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:47.161Z,1478852447.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:47.193Z,1478852447.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:47.561Z,1478852447.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:47.593Z,1478852447.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:47.961Z,1478852447.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:47.994Z,1478852447.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:48.361Z,1478852448.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:48.393Z,1478852448.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:48.761Z,1478852448.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:48.793Z,1478852448.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:49.161Z,1478852449.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:49.194Z,1478852449.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:49.588Z,1478852449.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:49.603Z,1478852449.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:49.976Z,1478852449.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:49.998Z,1478852449.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:50.361Z,1478852450.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:50.394Z,1478852450.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:50.761Z,1478852450.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:50.793Z,1478852450.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:51.161Z,1478852451.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:51.196Z,1478852451.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:51.561Z,1478852451.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:51.594Z,1478852451.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:51.978Z,1478852451.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:51.993Z,1478852451.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:52.361Z,1478852452.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:52.387Z,1478852452.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:52.765Z,1478852452.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:52.797Z,1478852452.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:53.162Z,1478852453.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:53.181Z,1478852453.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:53.565Z,1478852453.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:53.585Z,1478852453.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:53.979Z,1478852453.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:54.011Z,1478852454.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:54.380Z,1478852454.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:54.419Z,1478852454.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:54.765Z,1478852454.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:54.785Z,1478852454.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:55.169Z,1478852455.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:55.184Z,1478852455.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:55.573Z,1478852455.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:55.589Z,1478852455.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:55.965Z,1478852455.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:55.986Z,1478852455.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:56.368Z,1478852456.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:56.389Z,1478852456.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:56.778Z,1478852456.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:56.794Z,1478852456.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:57.161Z,1478852457.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:57.193Z,1478852457.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:57.561Z,1478852457.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:57.633Z,1478852457.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:57.970Z,1478852457.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:57.997Z,1478852457.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:58.364Z,1478852458.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:58.409Z,1478852458.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:58.765Z,1478852458.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:58.780Z,1478852458.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:59.169Z,1478852459.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:59.220Z,1478852459.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:59.568Z,1478852459.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:59.619Z,1478852459.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:20:59.968Z,1478852459.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:20:59.983Z,1478852459.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:00.368Z,1478852460.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:00.384Z,1478852460.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:00.764Z,1478852460.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:00.794Z,1478852460.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:01.165Z,1478852461.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:01.192Z,1478852461.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:01.572Z,1478852461.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:01.592Z,1478852461.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:01.967Z,1478852461.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:01.988Z,1478852461.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:02.382Z,1478852462.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:02.401Z,1478852462.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:02.784Z,1478852462.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:02.799Z,1478852462.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:03.161Z,1478852463.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:03.193Z,1478852463.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:03.561Z,1478852463.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:03.594Z,1478852463.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:03.966Z,1478852463.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:03.993Z,1478852463.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:04.361Z,1478852464.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:04.393Z,1478852464.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:04.761Z,1478852464.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:04.797Z,1478852464.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:05.162Z,1478852465.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:05.185Z,1478852465.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:05.561Z,1478852465.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:05.601Z,1478852465.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:05.961Z,1478852465.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:05.981Z,1478852465.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:06.362Z,1478852466.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:06.377Z,1478852466.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:06.780Z,1478852466.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:06.810Z,1478852466.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:07.172Z,1478852467.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:07.205Z,1478852467.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:07.566Z,1478852467.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:07.581Z,1478852467.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:07.973Z,1478852467.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:07.989Z,1478852467.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:08.370Z,1478852468.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:08.385Z,1478852468.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:08.769Z,1478852468.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:08.789Z,1478852468.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:09.172Z,1478852469.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:09.188Z,1478852469.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:09.569Z,1478852469.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:09.584Z,1478852469.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:09.969Z,1478852469.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:09.989Z,1478852469.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:10.364Z,1478852470.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:10.401Z,1478852470.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:10.761Z,1478852470.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:10.797Z,1478852470.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:11.184Z,1478852471.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:11.203Z,1478852471.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:11.580Z,1478852471.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:11.596Z,1478852471.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:11.961Z,1478852471.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:12.045Z,1478852472.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:15.302Z,1478852475.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:15.319Z,1478852475.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:15.444Z,1478852475.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:15.464Z,1478852475.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:15.825Z,1478852475.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:15.855Z,1478852475.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:16.220Z,1478852476.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:16.281Z,1478852476.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:16.605Z,1478852476.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:16.629Z,1478852476.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:17.012Z,1478852477.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:17.065Z,1478852477.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:17.412Z,1478852477.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:17.458Z,1478852477.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:17.812Z,1478852477.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:17.858Z,1478852477.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:18.211Z,1478852478.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:18.233Z,1478852478.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:18.619Z,1478852478.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:18.638Z,1478852478.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:19.009Z,1478852479.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:19.037Z,1478852479.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:19.405Z,1478852479.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:19.445Z,1478852479.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:19.806Z,1478852479.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:19.836Z,1478852479.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:20.224Z,1478852480.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:20.257Z,1478852480.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:20.624Z,1478852480.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:20.645Z,1478852480.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:21.035Z,1478852481.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:21.050Z,1478852481.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:21.418Z,1478852481.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:21.453Z,1478852481.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:21.807Z,1478852481.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:21.840Z,1478852481.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:22.208Z,1478852482.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:22.240Z,1478852482.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:22.605Z,1478852482.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:22.649Z,1478852482.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:23.009Z,1478852483.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:23.054Z,1478852483.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:23.412Z,1478852483.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:23.449Z,1478852483.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:23.813Z,1478852483.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:23.833Z,1478852483.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:24.212Z,1478852484.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:24.257Z,1478852484.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:24.613Z,1478852484.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:24.625Z,1478852484.625 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T08:21:24.657Z,1478852484.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:25.021Z,1478852485.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:25.036Z,1478852485.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:25.424Z,1478852485.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:25.441Z,1478852485.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:25.825Z,1478852485.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:25.841Z,1478852485.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:26.224Z,1478852486.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:26.253Z,1478852486.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:26.608Z,1478852486.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:26.642Z,1478852486.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:27.019Z,1478852487.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:27.034Z,1478852487.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:27.405Z,1478852487.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:27.434Z,1478852487.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:27.819Z,1478852487.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:27.841Z,1478852487.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:28.219Z,1478852488.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:28.242Z,1478852488.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:28.610Z,1478852488.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:28.629Z,1478852488.629 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T08:21:28.629Z,1478852488.629 [BPC1] Data Fault, FailCount= 1
2016-11-11T08:21:28.629Z,1478852488.629 [BPC1](ERROR): Data Fault
2016-11-11T08:21:28.637Z,1478852488.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:28.658Z,1478852488.658 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T08:21:29.005Z,1478852489.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:29.042Z,1478852489.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:29.412Z,1478852489.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:29.427Z,1478852489.427 [PNI_TCM](ERROR): CRC does not match. Expected:0x386 got:0x6336
2016-11-11T08:21:29.446Z,1478852489.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:29.807Z,1478852489.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:29.835Z,1478852489.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:29.875Z,1478852489.875 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:21:29.876Z,1478852489.875 [BPC1] No Fault, FailCount= 1
2016-11-11T08:21:30.219Z,1478852490.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:30.294Z,1478852490.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:30.622Z,1478852490.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:30.657Z,1478852490.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:31.021Z,1478852491.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:31.077Z,1478852491.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:31.424Z,1478852491.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:31.452Z,1478852491.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:31.810Z,1478852491.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:31.830Z,1478852491.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:32.213Z,1478852492.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:32.233Z,1478852492.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:32.618Z,1478852492.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:32.633Z,1478852492.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:33.016Z,1478852493.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:33.045Z,1478852493.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:33.408Z,1478852493.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:33.441Z,1478852493.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:33.806Z,1478852493.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:33.845Z,1478852493.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:34.216Z,1478852494.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:34.236Z,1478852494.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:34.607Z,1478852494.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:34.638Z,1478852494.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:35.005Z,1478852495.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:35.043Z,1478852495.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:35.430Z,1478852495.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:35.446Z,1478852495.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:35.820Z,1478852495.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:35.852Z,1478852495.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:36.228Z,1478852496.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:36.244Z,1478852496.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:36.616Z,1478852496.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:36.641Z,1478852496.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:37.008Z,1478852497.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:37.035Z,1478852497.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:37.408Z,1478852497.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:37.444Z,1478852497.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:37.805Z,1478852497.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:37.820Z,1478852497.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:38.205Z,1478852498.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:38.225Z,1478852498.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:38.607Z,1478852498.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:38.629Z,1478852498.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:39.015Z,1478852499.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:39.030Z,1478852499.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:39.413Z,1478852499.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:39.433Z,1478852499.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:39.811Z,1478852499.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:39.833Z,1478852499.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:40.217Z,1478852500.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:40.241Z,1478852500.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:40.628Z,1478852500.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:40.643Z,1478852500.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:41.023Z,1478852501.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:41.037Z,1478852501.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:41.427Z,1478852501.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:41.446Z,1478852501.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:41.832Z,1478852501.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:41.847Z,1478852501.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:42.209Z,1478852502.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:42.240Z,1478852502.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:42.605Z,1478852502.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:42.642Z,1478852502.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:43.005Z,1478852503.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:43.065Z,1478852503.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:43.408Z,1478852503.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:43.445Z,1478852503.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:43.806Z,1478852503.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:43.820Z,1478852503.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:44.205Z,1478852504.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:44.241Z,1478852504.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:44.609Z,1478852504.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:44.623Z,1478852504.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:45.007Z,1478852505.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:45.032Z,1478852505.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:45.415Z,1478852505.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:45.431Z,1478852505.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:45.822Z,1478852505.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:45.841Z,1478852505.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:46.227Z,1478852506.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:46.235Z,1478852506.235 [BPC1](ERROR): Failed to receive battery data
2016-11-11T08:21:46.235Z,1478852506.235 [BPC1] Communications Fault, FailCount= 2
2016-11-11T08:21:46.235Z,1478852506.235 [BPC1](ERROR): Communications Fault
2016-11-11T08:21:46.243Z,1478852506.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:46.291Z,1478852506.291 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T08:21:46.627Z,1478852506.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:46.642Z,1478852506.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:47.021Z,1478852507.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:47.036Z,1478852507.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:47.405Z,1478852507.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:47.440Z,1478852507.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:47.460Z,1478852507.460 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:21:47.460Z,1478852507.460 [BPC1] No Fault, FailCount= 2
2016-11-11T08:21:47.805Z,1478852507.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:47.889Z,1478852507.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:48.206Z,1478852508.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:48.261Z,1478852508.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:48.605Z,1478852508.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:48.632Z,1478852508.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:49.005Z,1478852509.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:49.037Z,1478852509.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:49.405Z,1478852509.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:49.449Z,1478852509.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:49.806Z,1478852509.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:49.841Z,1478852509.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:50.205Z,1478852510.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:50.241Z,1478852510.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:50.605Z,1478852510.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:50.640Z,1478852510.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:51.029Z,1478852511.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:51.049Z,1478852511.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:51.416Z,1478852511.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:51.449Z,1478852511.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:51.828Z,1478852511.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:51.849Z,1478852511.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:52.228Z,1478852512.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:52.257Z,1478852512.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:52.605Z,1478852512.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:52.641Z,1478852512.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:53.005Z,1478852513.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:53.041Z,1478852513.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:53.405Z,1478852513.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:53.436Z,1478852513.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:53.809Z,1478852513.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:53.829Z,1478852513.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:54.208Z,1478852514.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:54.229Z,1478852514.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:54.613Z,1478852514.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:54.633Z,1478852514.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:55.015Z,1478852515.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:55.031Z,1478852515.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:55.408Z,1478852515.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:55.437Z,1478852515.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:55.813Z,1478852515.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:55.829Z,1478852515.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:56.226Z,1478852516.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:56.250Z,1478852516.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:56.630Z,1478852516.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:56.646Z,1478852516.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:57.028Z,1478852517.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:57.044Z,1478852517.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:57.424Z,1478852517.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:57.446Z,1478852517.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:57.813Z,1478852517.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:57.845Z,1478852517.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:58.205Z,1478852518.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:58.241Z,1478852518.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:58.605Z,1478852518.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:58.637Z,1478852518.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:59.009Z,1478852519.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:59.034Z,1478852519.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:59.405Z,1478852519.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:59.433Z,1478852519.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:21:59.813Z,1478852519.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:21:59.839Z,1478852519.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:00.213Z,1478852520.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:00.273Z,1478852520.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:00.605Z,1478852520.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:00.625Z,1478852520.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:01.008Z,1478852521.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:01.033Z,1478852521.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:01.428Z,1478852521.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:01.443Z,1478852521.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:01.822Z,1478852521.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:01.837Z,1478852521.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:02.226Z,1478852522.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:02.245Z,1478852522.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:02.626Z,1478852522.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:02.641Z,1478852522.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:03.005Z,1478852523.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:03.040Z,1478852523.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:03.405Z,1478852523.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:03.422Z,1478852523.422 [BPC1](ERROR): Failed to receive battery data
2016-11-11T08:22:03.422Z,1478852523.422 [BPC1] Communications Fault, FailCount= 3
2016-11-11T08:22:03.422Z,1478852523.422 [BPC1](ERROR): Communications Fault
2016-11-11T08:22:03.435Z,1478852523.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:03.476Z,1478852523.476 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T08:22:03.813Z,1478852523.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:03.845Z,1478852523.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:04.205Z,1478852524.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:04.225Z,1478852524.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:04.610Z,1478852524.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:04.629Z,1478852524.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:04.666Z,1478852524.667 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:22:04.667Z,1478852524.667 [BPC1] No Fault, FailCount= 3
2016-11-11T08:22:05.013Z,1478852525.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:05.081Z,1478852525.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:05.413Z,1478852525.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:05.464Z,1478852525.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:05.808Z,1478852525.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:05.829Z,1478852525.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:06.217Z,1478852526.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:06.241Z,1478852526.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:06.628Z,1478852526.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:06.643Z,1478852526.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:07.020Z,1478852527.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:07.046Z,1478852527.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:07.432Z,1478852527.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:07.447Z,1478852527.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:07.829Z,1478852527.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:07.844Z,1478852527.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:08.209Z,1478852528.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:08.241Z,1478852528.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:08.605Z,1478852528.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:08.641Z,1478852528.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:09.005Z,1478852529.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:09.041Z,1478852529.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:09.405Z,1478852529.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:09.441Z,1478852529.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:09.809Z,1478852529.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:09.841Z,1478852529.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:10.206Z,1478852530.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:10.250Z,1478852530.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:10.605Z,1478852530.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:10.645Z,1478852530.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:11.014Z,1478852531.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:11.047Z,1478852531.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:11.413Z,1478852531.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:11.445Z,1478852531.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:11.821Z,1478852531.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:11.849Z,1478852531.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:12.234Z,1478852532.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:12.249Z,1478852532.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:15.612Z,1478852535.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:15.656Z,1478852535.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:15.768Z,1478852535.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:15.803Z,1478852535.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:16.106Z,1478852536.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:16.165Z,1478852536.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:16.522Z,1478852536.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:16.549Z,1478852536.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:16.932Z,1478852536.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:17.009Z,1478852537.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:17.338Z,1478852537.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:17.357Z,1478852537.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:17.761Z,1478852537.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:17.801Z,1478852537.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:18.130Z,1478852538.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:18.157Z,1478852538.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:18.511Z,1478852538.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:18.544Z,1478852538.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:18.909Z,1478852538.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:18.939Z,1478852538.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:19.317Z,1478852539.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:19.334Z,1478852539.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:19.717Z,1478852539.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:19.737Z,1478852539.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:20.115Z,1478852540.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:20.142Z,1478852540.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:20.514Z,1478852540.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:20.524Z,1478852540.523 [BPC1](ERROR): Failed to receive battery data
2016-11-11T08:22:20.524Z,1478852540.524 [BPC1] Communications Fault, FailCount= 4
2016-11-11T08:22:20.524Z,1478852540.524 [BPC1](ERROR): Communications Fault
2016-11-11T08:22:20.534Z,1478852540.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:20.580Z,1478852540.579 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T08:22:20.916Z,1478852540.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:20.933Z,1478852540.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:21.316Z,1478852541.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:21.343Z,1478852541.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:21.719Z,1478852541.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:21.750Z,1478852541.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:21.794Z,1478852541.794 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:22:21.794Z,1478852541.794 [BPC1] No Fault, FailCount= 4
2016-11-11T08:22:22.129Z,1478852542.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:22.202Z,1478852542.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:22.532Z,1478852542.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:22.572Z,1478852542.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:22.930Z,1478852542.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:22.946Z,1478852542.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:23.325Z,1478852543.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:23.357Z,1478852543.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:23.705Z,1478852543.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:23.743Z,1478852543.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:24.106Z,1478852544.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:24.143Z,1478852544.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:24.507Z,1478852544.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:24.545Z,1478852544.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:24.902Z,1478852544.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:24.938Z,1478852544.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:25.321Z,1478852545.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:25.337Z,1478852545.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:25.719Z,1478852545.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:25.749Z,1478852545.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:26.108Z,1478852546.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:26.148Z,1478852546.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:26.509Z,1478852546.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:26.551Z,1478852546.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:26.917Z,1478852546.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:26.952Z,1478852546.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:27.323Z,1478852547.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:27.352Z,1478852547.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:27.726Z,1478852547.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:27.750Z,1478852547.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:28.128Z,1478852548.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:28.158Z,1478852548.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:28.529Z,1478852548.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:28.553Z,1478852548.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:28.944Z,1478852548.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:28.981Z,1478852548.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:29.324Z,1478852549.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:29.365Z,1478852549.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:29.715Z,1478852549.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:29.752Z,1478852549.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:30.120Z,1478852550.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:30.127Z,1478852550.127 [PNI_TCM](ERROR): CRC does not match. Expected:0x21718 got:0x10503
2016-11-11T08:22:30.164Z,1478852550.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:30.532Z,1478852550.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:30.555Z,1478852550.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:30.922Z,1478852550.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:30.945Z,1478852550.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:31.317Z,1478852551.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:31.341Z,1478852551.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:31.706Z,1478852551.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:31.744Z,1478852551.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:32.108Z,1478852552.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:32.145Z,1478852552.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:32.543Z,1478852552.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:32.558Z,1478852552.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:32.954Z,1478852552.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:32.993Z,1478852552.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:33.325Z,1478852553.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:33.389Z,1478852553.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:33.730Z,1478852553.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:33.750Z,1478852553.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:34.129Z,1478852554.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:34.148Z,1478852554.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:34.505Z,1478852554.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:34.597Z,1478852554.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:34.923Z,1478852554.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:34.954Z,1478852554.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:35.314Z,1478852555.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:35.373Z,1478852555.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:35.710Z,1478852555.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:35.758Z,1478852555.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:36.111Z,1478852556.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:36.130Z,1478852556.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:36.517Z,1478852556.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:36.541Z,1478852556.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:36.919Z,1478852556.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:36.934Z,1478852556.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:37.310Z,1478852557.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:37.343Z,1478852557.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:37.731Z,1478852557.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:37.755Z,1478852557.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:38.132Z,1478852558.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:38.147Z,1478852558.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:38.530Z,1478852558.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:38.546Z,1478852558.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:38.933Z,1478852558.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:38.952Z,1478852558.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:39.307Z,1478852559.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:39.347Z,1478852559.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:39.708Z,1478852559.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:39.749Z,1478852559.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:40.108Z,1478852560.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:40.145Z,1478852560.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:40.508Z,1478852560.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:40.555Z,1478852560.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:40.908Z,1478852560.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:40.926Z,1478852560.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:41.314Z,1478852561.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:41.330Z,1478852561.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:41.716Z,1478852561.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:41.762Z,1478852561.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:42.116Z,1478852562.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:42.131Z,1478852562.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:42.513Z,1478852562.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:42.530Z,1478852562.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:42.931Z,1478852562.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:42.958Z,1478852562.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:43.320Z,1478852563.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:43.345Z,1478852563.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:43.728Z,1478852563.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:43.745Z,1478852563.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:44.130Z,1478852564.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:44.169Z,1478852564.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:44.507Z,1478852564.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:44.545Z,1478852564.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:44.910Z,1478852564.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:44.942Z,1478852564.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:45.310Z,1478852565.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:45.343Z,1478852565.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:45.707Z,1478852565.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:45.776Z,1478852565.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:46.117Z,1478852566.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:46.164Z,1478852566.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:46.516Z,1478852566.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:46.566Z,1478852566.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:46.908Z,1478852566.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:46.943Z,1478852566.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:47.322Z,1478852567.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:47.345Z,1478852567.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:47.706Z,1478852567.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:47.769Z,1478852567.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:48.122Z,1478852568.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:48.153Z,1478852568.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:48.534Z,1478852568.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:48.586Z,1478852568.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:48.929Z,1478852568.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:48.957Z,1478852568.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:49.339Z,1478852569.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:49.391Z,1478852569.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:49.714Z,1478852569.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:49.764Z,1478852569.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:50.121Z,1478852570.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:50.160Z,1478852570.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:50.527Z,1478852570.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:50.550Z,1478852570.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:50.936Z,1478852570.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:50.980Z,1478852570.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:51.324Z,1478852571.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:51.353Z,1478852571.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:51.708Z,1478852571.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:51.746Z,1478852571.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:52.109Z,1478852572.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:52.144Z,1478852572.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:52.508Z,1478852572.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:52.554Z,1478852572.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:52.908Z,1478852572.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:52.936Z,1478852572.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:53.332Z,1478852573.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:53.352Z,1478852573.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:53.724Z,1478852573.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:53.769Z,1478852573.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:54.131Z,1478852574.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:54.146Z,1478852574.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:54.527Z,1478852574.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:54.551Z,1478852574.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:54.907Z,1478852574.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:54.969Z,1478852574.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:55.307Z,1478852575.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:55.355Z,1478852575.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:55.706Z,1478852575.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:55.754Z,1478852575.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:56.114Z,1478852576.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:56.148Z,1478852576.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:56.508Z,1478852576.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:56.541Z,1478852576.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:56.933Z,1478852576.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:56.956Z,1478852576.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:57.310Z,1478852577.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:57.353Z,1478852577.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:57.716Z,1478852577.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:57.744Z,1478852577.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:58.128Z,1478852578.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:58.179Z,1478852578.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:58.530Z,1478852578.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:58.549Z,1478852578.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:58.922Z,1478852578.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:58.945Z,1478852578.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:59.334Z,1478852579.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:59.349Z,1478852579.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:22:59.735Z,1478852579.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:22:59.750Z,1478852579.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:00.109Z,1478852580.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:00.156Z,1478852580.156 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:00.156Z,1478852580.156 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2016-11-11T08:23:00.156Z,1478852580.156 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:23:00.171Z,1478852580.171 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:00.171Z,1478852580.171 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 52
2016-11-11T08:23:00.172Z,1478852580.172 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:23:00.174Z,1478852580.174 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:00.174Z,1478852580.174 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 52
2016-11-11T08:23:00.174Z,1478852580.174 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:23:00.201Z,1478852580.201 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:23:00.201Z,1478852580.201 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:23:00.201Z,1478852580.201 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:23:00.519Z,1478852580.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:00.625Z,1478852580.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:23:00.626Z,1478852580.625 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2016-11-11T08:23:00.626Z,1478852580.626 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:23:00.626Z,1478852580.626 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 52
2016-11-11T08:23:00.631Z,1478852580.631 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:23:00.631Z,1478852580.631 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 52
2016-11-11T08:23:00.905Z,1478852580.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:00.945Z,1478852580.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:23:00.946Z,1478852580.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:23:00.946Z,1478852580.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:23:00.951Z,1478852580.951 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:23:00.951Z,1478852580.951 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:23:00.952Z,1478852580.952 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:23:00.952Z,1478852580.952 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:23:00.952Z,1478852580.953 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:23:00.953Z,1478852580.953 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:23:01.305Z,1478852581.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:01.322Z,1478852581.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:23:01.323Z,1478852581.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:01.709Z,1478852581.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:01.777Z,1478852581.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:23:01.778Z,1478852581.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:02.169Z,1478852582.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:02.198Z,1478852582.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:23:02.199Z,1478852582.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:02.516Z,1478852582.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:02.569Z,1478852582.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:23:02.570Z,1478852582.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:02.920Z,1478852582.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:02.990Z,1478852582.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:23:02.991Z,1478852582.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:03.309Z,1478852583.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:03.349Z,1478852583.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T08:23:03.350Z,1478852583.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:03.724Z,1478852583.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:03.771Z,1478852583.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T08:23:03.772Z,1478852583.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:04.140Z,1478852584.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:04.185Z,1478852584.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T08:23:04.186Z,1478852584.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:04.530Z,1478852584.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:04.544Z,1478852584.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T08:23:04.545Z,1478852584.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:04.918Z,1478852584.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:04.944Z,1478852584.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T08:23:04.945Z,1478852584.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:05.305Z,1478852585.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:05.350Z,1478852585.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T08:23:05.351Z,1478852585.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:05.705Z,1478852585.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:05.749Z,1478852585.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T08:23:05.751Z,1478852585.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:06.154Z,1478852586.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:06.172Z,1478852586.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T08:23:06.173Z,1478852586.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:06.508Z,1478852586.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:06.529Z,1478852586.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T08:23:06.530Z,1478852586.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:06.923Z,1478852586.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:06.938Z,1478852586.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T08:23:06.939Z,1478852586.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:07.308Z,1478852587.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:07.348Z,1478852587.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T08:23:07.349Z,1478852587.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:07.740Z,1478852587.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:07.779Z,1478852587.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T08:23:07.784Z,1478852587.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:08.122Z,1478852588.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:08.137Z,1478852588.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T08:23:08.138Z,1478852588.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:08.508Z,1478852588.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:08.541Z,1478852588.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T08:23:08.542Z,1478852588.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:08.952Z,1478852588.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:08.979Z,1478852588.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T08:23:08.980Z,1478852588.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:09.349Z,1478852589.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:09.364Z,1478852589.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T08:23:09.365Z,1478852589.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:09.733Z,1478852589.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:09.747Z,1478852589.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T08:23:09.748Z,1478852589.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:10.134Z,1478852590.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:10.149Z,1478852590.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T08:23:10.150Z,1478852590.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:10.515Z,1478852590.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:10.550Z,1478852590.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T08:23:10.551Z,1478852590.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:10.909Z,1478852590.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:10.926Z,1478852590.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T08:23:10.927Z,1478852590.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:11.310Z,1478852591.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:11.336Z,1478852591.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T08:23:11.336Z,1478852591.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:11.715Z,1478852591.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:11.730Z,1478852591.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T08:23:11.731Z,1478852591.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:12.108Z,1478852592.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:12.156Z,1478852592.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T08:23:12.157Z,1478852592.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:12.514Z,1478852592.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:12.537Z,1478852592.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T08:23:12.538Z,1478852592.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:19.199Z,1478852599.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:19.254Z,1478852599.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2016-11-11T08:23:19.255Z,1478852599.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:19.356Z,1478852599.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:19.371Z,1478852599.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T08:23:19.372Z,1478852599.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:19.729Z,1478852599.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:19.777Z,1478852599.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T08:23:19.778Z,1478852599.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:20.128Z,1478852600.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:20.142Z,1478852600.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2016-11-11T08:23:20.143Z,1478852600.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:20.508Z,1478852600.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:20.563Z,1478852600.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:20.910Z,1478852600.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:20.957Z,1478852600.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:21.309Z,1478852601.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:21.327Z,1478852601.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:21.706Z,1478852601.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:21.732Z,1478852601.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:22.109Z,1478852602.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:22.136Z,1478852602.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:22.505Z,1478852602.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:22.569Z,1478852602.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:22.909Z,1478852602.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:22.934Z,1478852602.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:23.305Z,1478852603.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:23.329Z,1478852603.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:23.709Z,1478852603.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:23.737Z,1478852603.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:24.145Z,1478852604.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:24.172Z,1478852604.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:24.523Z,1478852604.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:24.546Z,1478852604.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:24.921Z,1478852604.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:24.936Z,1478852604.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:25.322Z,1478852605.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:25.337Z,1478852605.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:25.720Z,1478852605.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:25.736Z,1478852605.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:26.109Z,1478852606.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:26.128Z,1478852606.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:26.509Z,1478852606.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:26.527Z,1478852606.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:26.905Z,1478852606.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:26.929Z,1478852606.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:27.309Z,1478852607.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:27.326Z,1478852607.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:27.705Z,1478852607.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:27.723Z,1478852607.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:28.109Z,1478852608.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:28.126Z,1478852608.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:28.146Z,1478852608.146 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T08:23:28.146Z,1478852608.146 [Rowe_600LCM] No Fault, FailCount= 5
2016-11-11T08:23:28.191Z,1478852608.191 [Rowe_600LCM](INFO): Initializing
2016-11-11T08:23:28.192Z,1478852608.192 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T08:23:28.192Z,1478852608.192 [Rowe_600LCM](INFO): LCM OK
2016-11-11T08:23:28.192Z,1478852608.192 [Rowe_600LCM](INFO): Powering up
2016-11-11T08:23:28.506Z,1478852608.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:28.529Z,1478852608.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:28.909Z,1478852608.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:28.927Z,1478852608.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:29.322Z,1478852609.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:29.373Z,1478852609.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:29.726Z,1478852609.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:29.741Z,1478852609.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:30.126Z,1478852610.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:30.141Z,1478852610.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:30.522Z,1478852610.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:30.541Z,1478852610.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:30.909Z,1478852610.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:30.927Z,1478852610.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:31.306Z,1478852611.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:31.349Z,1478852611.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:31.709Z,1478852611.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:31.733Z,1478852611.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:32.109Z,1478852612.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:32.127Z,1478852612.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:32.312Z,1478852612.312 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T08:23:32.366Z,1478852612.366 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T08:23:32.368Z,1478852612.368 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T08:23:32.369Z,1478852612.369 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T08:23:32.370Z,1478852612.370 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T08:23:32.506Z,1478852612.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:32.554Z,1478852612.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:32.905Z,1478852612.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:32.929Z,1478852612.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:33.310Z,1478852613.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:33.328Z,1478852613.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:33.710Z,1478852613.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:33.758Z,1478852613.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:34.109Z,1478852614.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:34.128Z,1478852614.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:34.521Z,1478852614.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:34.562Z,1478852614.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:34.926Z,1478852614.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:34.974Z,1478852614.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:35.472Z,1478852615.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:35.502Z,1478852615.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:35.720Z,1478852615.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:35.754Z,1478852615.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:36.109Z,1478852616.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:36.137Z,1478852616.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:36.510Z,1478852616.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:36.528Z,1478852616.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:36.909Z,1478852616.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:36.933Z,1478852616.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:37.309Z,1478852617.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:37.327Z,1478852617.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:37.709Z,1478852617.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:37.727Z,1478852617.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:38.122Z,1478852618.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:38.143Z,1478852618.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:38.509Z,1478852618.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:38.536Z,1478852618.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:38.910Z,1478852618.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:38.969Z,1478852618.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:39.309Z,1478852619.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:39.333Z,1478852619.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:39.733Z,1478852619.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:39.748Z,1478852619.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:40.133Z,1478852620.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:40.153Z,1478852620.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:40.546Z,1478852620.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:40.562Z,1478852620.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:40.923Z,1478852620.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:40.945Z,1478852620.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:41.310Z,1478852621.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:41.327Z,1478852621.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:41.707Z,1478852621.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:41.785Z,1478852621.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:42.107Z,1478852622.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:42.149Z,1478852622.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:42.507Z,1478852622.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:42.549Z,1478852622.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:42.907Z,1478852622.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:42.933Z,1478852622.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:43.306Z,1478852623.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:43.350Z,1478852623.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:43.707Z,1478852623.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:43.741Z,1478852623.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:44.107Z,1478852624.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:44.154Z,1478852624.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:44.506Z,1478852624.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:44.544Z,1478852624.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:44.924Z,1478852624.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:44.948Z,1478852624.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:45.319Z,1478852625.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:45.378Z,1478852625.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:45.724Z,1478852625.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:45.753Z,1478852625.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:46.120Z,1478852626.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:46.197Z,1478852626.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:46.507Z,1478852626.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:46.542Z,1478852626.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:46.906Z,1478852626.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:46.942Z,1478852626.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:47.317Z,1478852627.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:47.370Z,1478852627.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:47.707Z,1478852627.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:47.750Z,1478852627.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:48.106Z,1478852628.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:48.170Z,1478852628.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:48.507Z,1478852628.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:48.553Z,1478852628.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:48.906Z,1478852628.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:48.932Z,1478852628.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:49.306Z,1478852629.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:49.332Z,1478852629.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:49.706Z,1478852629.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:49.734Z,1478852629.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:50.122Z,1478852630.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:50.138Z,1478852630.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:50.519Z,1478852630.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:50.539Z,1478852630.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:50.922Z,1478852630.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:50.953Z,1478852630.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:51.323Z,1478852631.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:51.353Z,1478852631.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:51.706Z,1478852631.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:51.773Z,1478852631.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:52.105Z,1478852632.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:52.152Z,1478852632.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:52.505Z,1478852632.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:52.541Z,1478852632.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:52.921Z,1478852632.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:52.952Z,1478852632.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:53.311Z,1478852633.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:53.355Z,1478852633.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:53.709Z,1478852633.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:53.727Z,1478852633.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:54.115Z,1478852634.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:54.130Z,1478852634.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:54.525Z,1478852634.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:54.545Z,1478852634.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:54.927Z,1478852634.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:54.943Z,1478852634.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:55.343Z,1478852635.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:55.386Z,1478852635.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:55.724Z,1478852635.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:55.757Z,1478852635.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:56.132Z,1478852636.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:56.160Z,1478852636.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:56.537Z,1478852636.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:56.557Z,1478852636.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:56.945Z,1478852636.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:57.004Z,1478852637.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:57.306Z,1478852637.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:57.329Z,1478852637.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:57.716Z,1478852637.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:57.731Z,1478852637.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:58.120Z,1478852638.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:58.166Z,1478852638.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:58.519Z,1478852638.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:58.568Z,1478852638.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:58.922Z,1478852638.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:58.973Z,1478852638.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:59.305Z,1478852639.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:59.370Z,1478852639.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:23:59.709Z,1478852639.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:23:59.737Z,1478852639.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:00.114Z,1478852640.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:00.164Z,1478852640.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:00.521Z,1478852640.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:00.538Z,1478852640.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:00.926Z,1478852640.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:00.981Z,1478852640.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:01.216Z,1478852641.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:01.326Z,1478852641.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:01.371Z,1478852641.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:01.722Z,1478852641.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:01.760Z,1478852641.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:02.012Z,1478852642.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:02.114Z,1478852642.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:02.130Z,1478852642.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:02.514Z,1478852642.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:02.530Z,1478852642.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:02.905Z,1478852642.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:02.941Z,1478852642.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:03.315Z,1478852643.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:03.338Z,1478852643.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:03.715Z,1478852643.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:03.737Z,1478852643.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:04.105Z,1478852644.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:04.133Z,1478852644.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:04.505Z,1478852644.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:04.537Z,1478852644.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:04.917Z,1478852644.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:04.941Z,1478852644.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:05.310Z,1478852645.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:05.344Z,1478852645.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:05.728Z,1478852645.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:05.756Z,1478852645.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:06.118Z,1478852646.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:06.144Z,1478852646.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:06.531Z,1478852646.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:06.553Z,1478852646.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:06.929Z,1478852646.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:06.952Z,1478852646.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:07.305Z,1478852647.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:07.322Z,1478852647.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:07.705Z,1478852647.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:07.758Z,1478852647.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:08.106Z,1478852648.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:08.169Z,1478852648.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:08.531Z,1478852648.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:08.566Z,1478852648.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:08.921Z,1478852648.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:08.937Z,1478852648.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:09.308Z,1478852649.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:09.337Z,1478852649.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:09.724Z,1478852649.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:09.740Z,1478852649.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:10.116Z,1478852650.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:10.141Z,1478852650.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:10.522Z,1478852650.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:10.538Z,1478852650.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:10.934Z,1478852650.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:10.950Z,1478852650.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:11.351Z,1478852651.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:11.366Z,1478852651.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:11.387Z,1478852651.387 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T08:19:11.4Z
2016-11-11T08:24:11.387Z,1478852651.387 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T08:24:11.387Z,1478852651.387 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T08:24:11.751Z,1478852651.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:11.825Z,1478852651.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:12.661Z,1478852652.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:12.681Z,1478852652.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:12.789Z,1478852652.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:12.826Z,1478852652.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:16.211Z,1478852656.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:16.226Z,1478852656.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:18.537Z,1478852658.537 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0084.lzma
2016-11-11T08:24:18.581Z,1478852658.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:18.590Z,1478852658.590 [BPC1](ERROR): Failed to receive battery data
2016-11-11T08:24:18.590Z,1478852658.590 [BPC1] Communications Fault, FailCount= 1
2016-11-11T08:24:18.590Z,1478852658.590 [BPC1](ERROR): Communications Fault
2016-11-11T08:24:18.612Z,1478852658.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:18.670Z,1478852658.670 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T08:24:18.715Z,1478852658.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:18.763Z,1478852658.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:19.089Z,1478852659.089 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0084.lzma.bak
2016-11-11T08:24:19.089Z,1478852659.089 [DataOverHttps](INFO): SBD MOMSN=4555221
2016-11-11T08:24:19.119Z,1478852659.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:19.141Z,1478852659.141 [PNI_TCM](ERROR): CRC does not match. Expected:0x22870 got:0x6336
2016-11-11T08:24:19.168Z,1478852659.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:20.455Z,1478852660.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:20.472Z,1478852660.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:20.516Z,1478852660.516 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:24:20.516Z,1478852660.516 [BPC1] No Fault, FailCount= 1
2016-11-11T08:24:20.577Z,1478852660.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:20.665Z,1478852660.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:24.130Z,1478852664.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:24.189Z,1478852664.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:24.289Z,1478852664.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:24.325Z,1478852664.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:24.654Z,1478852664.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:24.693Z,1478852664.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:25.083Z,1478852665.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:25.105Z,1478852665.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:25.472Z,1478852665.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:25.488Z,1478852665.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:25.876Z,1478852665.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:25.900Z,1478852665.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:29.483Z,1478852669.483 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T08:24:29.500Z,1478852669.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:29.518Z,1478852669.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:29.598Z,1478852669.598 [DataOverHttps](INFO): Sending 237 bytes from file Logs/20161111T044527/Express0085.lzma
2016-11-11T08:24:29.644Z,1478852669.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:29.672Z,1478852669.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:30.028Z,1478852670.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:30.065Z,1478852670.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:30.397Z,1478852670.397 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0085.lzma.bak
2016-11-11T08:24:30.397Z,1478852670.397 [DataOverHttps](INFO): SBD MOMSN=4555223
2016-11-11T08:24:30.431Z,1478852670.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:30.457Z,1478852670.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:47.461Z,1478852687.461 [NAL9602](INFO): Powering down
2016-11-11T08:24:47.503Z,1478852687.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:47.522Z,1478852687.522 [BPC1](ERROR): Failed to receive battery data
2016-11-11T08:24:47.522Z,1478852687.522 [BPC1] Communications Fault, FailCount= 2
2016-11-11T08:24:47.522Z,1478852687.522 [BPC1](ERROR): Communications Fault
2016-11-11T08:24:47.535Z,1478852687.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:47.561Z,1478852687.560 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T08:24:47.561Z,1478852687.561 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T08:24:47.561Z,1478852687.561 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T08:24:47.581Z,1478852687.580 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T08:24:47.637Z,1478852687.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:47.674Z,1478852687.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:51.134Z,1478852691.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:51.150Z,1478852691.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:51.249Z,1478852691.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:51.278Z,1478852691.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:51.326Z,1478852691.326 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:24:51.326Z,1478852691.326 [BPC1] No Fault, FailCount= 2
2016-11-11T08:24:51.648Z,1478852691.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:51.710Z,1478852691.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:52.051Z,1478852692.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:52.105Z,1478852692.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:52.448Z,1478852692.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:52.463Z,1478852692.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:52.855Z,1478852692.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:52.871Z,1478852692.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:53.248Z,1478852693.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:53.271Z,1478852693.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:53.652Z,1478852693.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:53.668Z,1478852693.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:54.041Z,1478852694.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:54.075Z,1478852694.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:54.441Z,1478852694.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:54.466Z,1478852694.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:54.841Z,1478852694.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:54.873Z,1478852694.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:55.241Z,1478852695.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:55.275Z,1478852695.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:55.648Z,1478852695.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:55.672Z,1478852695.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:56.041Z,1478852696.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:56.068Z,1478852696.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:56.441Z,1478852696.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:56.475Z,1478852696.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:56.852Z,1478852696.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:56.876Z,1478852696.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:57.241Z,1478852697.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:57.277Z,1478852697.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:57.641Z,1478852697.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:57.677Z,1478852697.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:58.045Z,1478852698.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:58.077Z,1478852698.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:58.441Z,1478852698.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:58.464Z,1478852698.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:58.849Z,1478852698.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:58.881Z,1478852698.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:59.245Z,1478852699.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:59.282Z,1478852699.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:24:59.641Z,1478852699.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:24:59.656Z,1478852699.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:00.041Z,1478852700.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:00.061Z,1478852700.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:00.453Z,1478852700.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:00.468Z,1478852700.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:00.853Z,1478852700.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:00.868Z,1478852700.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:01.248Z,1478852701.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:01.263Z,1478852701.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:01.652Z,1478852701.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:01.667Z,1478852701.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:02.052Z,1478852702.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:02.067Z,1478852702.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:02.441Z,1478852702.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:02.481Z,1478852702.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:02.849Z,1478852702.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:02.905Z,1478852702.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:03.241Z,1478852703.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:03.250Z,1478852703.250 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T08:25:03.250Z,1478852703.250 [BPC1] Data Fault, FailCount= 3
2016-11-11T08:25:03.250Z,1478852703.250 [BPC1](ERROR): Data Fault
2016-11-11T08:25:03.258Z,1478852703.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:03.303Z,1478852703.303 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T08:25:03.641Z,1478852703.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:03.665Z,1478852703.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:04.051Z,1478852704.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:04.067Z,1478852704.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:04.448Z,1478852704.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:04.463Z,1478852704.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:04.499Z,1478852704.499 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:25:04.500Z,1478852704.500 [BPC1] No Fault, FailCount= 3
2016-11-11T08:25:04.857Z,1478852704.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:04.921Z,1478852704.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:05.244Z,1478852705.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:05.295Z,1478852705.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:05.648Z,1478852705.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:05.664Z,1478852705.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:06.050Z,1478852706.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:06.073Z,1478852706.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:06.457Z,1478852706.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:06.472Z,1478852706.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:06.845Z,1478852706.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:06.882Z,1478852706.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:07.241Z,1478852707.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:07.274Z,1478852707.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:07.645Z,1478852707.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:07.671Z,1478852707.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:08.041Z,1478852708.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:08.078Z,1478852708.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:08.449Z,1478852708.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:08.476Z,1478852708.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:08.847Z,1478852708.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:08.868Z,1478852708.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:09.249Z,1478852709.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:09.264Z,1478852709.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:09.584Z,1478852709.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:09.650Z,1478852709.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:09.665Z,1478852709.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:10.042Z,1478852710.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:10.069Z,1478852710.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:10.380Z,1478852710.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:10.448Z,1478852710.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:10.480Z,1478852710.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:10.841Z,1478852710.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:10.873Z,1478852710.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:11.241Z,1478852711.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:11.277Z,1478852711.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:11.641Z,1478852711.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:11.673Z,1478852711.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:12.048Z,1478852712.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:12.080Z,1478852712.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:12.441Z,1478852712.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:12.479Z,1478852712.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:12.841Z,1478852712.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:12.879Z,1478852712.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:13.245Z,1478852713.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:13.277Z,1478852713.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:13.641Z,1478852713.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:13.661Z,1478852713.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:14.041Z,1478852714.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:14.077Z,1478852714.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:14.441Z,1478852714.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:14.477Z,1478852714.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:14.849Z,1478852714.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:14.882Z,1478852714.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:15.248Z,1478852715.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:15.264Z,1478852715.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:15.648Z,1478852715.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:15.664Z,1478852715.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:16.047Z,1478852716.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:16.097Z,1478852716.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:16.456Z,1478852716.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:16.472Z,1478852716.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:16.853Z,1478852716.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:16.874Z,1478852716.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:17.241Z,1478852717.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:17.275Z,1478852717.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:17.641Z,1478852717.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:17.701Z,1478852717.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:18.041Z,1478852718.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:18.077Z,1478852718.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:18.441Z,1478852718.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:18.486Z,1478852718.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:18.849Z,1478852718.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:18.877Z,1478852718.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:19.247Z,1478852719.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:19.297Z,1478852719.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:19.647Z,1478852719.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:19.697Z,1478852719.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:20.047Z,1478852720.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:20.065Z,1478852720.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:20.448Z,1478852720.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:20.469Z,1478852720.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:20.851Z,1478852720.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:20.867Z,1478852720.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:21.248Z,1478852721.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:21.263Z,1478852721.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:21.648Z,1478852721.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:21.669Z,1478852721.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:22.041Z,1478852722.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:22.075Z,1478852722.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:22.441Z,1478852722.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:22.466Z,1478852722.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:22.841Z,1478852722.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:22.873Z,1478852722.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:23.241Z,1478852723.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:23.275Z,1478852723.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:23.641Z,1478852723.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:23.674Z,1478852723.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:24.041Z,1478852724.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:24.075Z,1478852724.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:24.441Z,1478852724.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:24.474Z,1478852724.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:24.852Z,1478852724.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:24.875Z,1478852724.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:25.241Z,1478852725.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:25.275Z,1478852725.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:25.641Z,1478852725.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:25.673Z,1478852725.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:26.045Z,1478852726.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:26.070Z,1478852726.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:26.449Z,1478852726.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:26.489Z,1478852726.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:26.853Z,1478852726.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:26.888Z,1478852726.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:27.248Z,1478852727.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:27.264Z,1478852727.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:27.647Z,1478852727.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:27.669Z,1478852727.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:28.048Z,1478852728.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:28.063Z,1478852728.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:28.485Z,1478852728.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:28.509Z,1478852728.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:28.855Z,1478852728.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:28.871Z,1478852728.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:29.252Z,1478852729.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:29.267Z,1478852729.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:29.641Z,1478852729.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:29.673Z,1478852729.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:30.041Z,1478852730.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:30.165Z,1478852730.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:30.441Z,1478852730.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:30.456Z,1478852730.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:30.849Z,1478852730.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:30.885Z,1478852730.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:31.249Z,1478852731.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:31.285Z,1478852731.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:31.641Z,1478852731.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:31.661Z,1478852731.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:32.046Z,1478852732.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:32.085Z,1478852732.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:32.447Z,1478852732.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:32.463Z,1478852732.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:32.849Z,1478852732.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:32.865Z,1478852732.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:33.252Z,1478852733.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:33.307Z,1478852733.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:33.655Z,1478852733.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:33.707Z,1478852733.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:34.041Z,1478852734.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:34.090Z,1478852734.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:34.441Z,1478852734.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:34.497Z,1478852734.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:34.849Z,1478852734.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:34.881Z,1478852734.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:35.241Z,1478852735.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:35.256Z,1478852735.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:35.653Z,1478852735.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:35.668Z,1478852735.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:36.048Z,1478852736.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:36.063Z,1478852736.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:36.448Z,1478852736.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:36.469Z,1478852736.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:36.851Z,1478852736.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:36.867Z,1478852736.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:37.256Z,1478852737.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:37.272Z,1478852737.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:37.649Z,1478852737.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:37.669Z,1478852737.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:38.042Z,1478852738.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:38.068Z,1478852738.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:38.441Z,1478852738.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:38.475Z,1478852738.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:38.857Z,1478852738.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:38.907Z,1478852738.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:39.248Z,1478852739.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:39.271Z,1478852739.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:39.641Z,1478852739.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:39.674Z,1478852739.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:40.041Z,1478852740.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:40.055Z,1478852740.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:40.445Z,1478852740.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:40.465Z,1478852740.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:40.879Z,1478852740.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:40.895Z,1478852740.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:41.249Z,1478852741.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:41.264Z,1478852741.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:41.649Z,1478852741.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:41.676Z,1478852741.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:42.053Z,1478852742.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:42.068Z,1478852742.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:42.441Z,1478852742.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:42.465Z,1478852742.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:42.841Z,1478852742.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:42.869Z,1478852742.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:43.241Z,1478852743.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:43.281Z,1478852743.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:43.641Z,1478852743.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:43.661Z,1478852743.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:44.049Z,1478852744.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:44.069Z,1478852744.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:44.447Z,1478852744.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:44.462Z,1478852744.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:44.850Z,1478852744.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:44.873Z,1478852744.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:45.251Z,1478852745.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:45.306Z,1478852745.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:45.648Z,1478852745.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:45.663Z,1478852745.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:46.053Z,1478852746.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:46.068Z,1478852746.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:46.449Z,1478852746.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:46.475Z,1478852746.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:46.850Z,1478852746.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:46.909Z,1478852746.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:47.242Z,1478852747.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:47.257Z,1478852747.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:47.648Z,1478852747.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:47.663Z,1478852747.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:48.050Z,1478852748.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:48.102Z,1478852748.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:51.638Z,1478852751.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:51.654Z,1478852751.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:51.701Z,1478852751.701 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T08:25:51.768Z,1478852751.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:51.813Z,1478852751.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:52.142Z,1478852752.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:52.201Z,1478852752.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:52.549Z,1478852752.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:52.605Z,1478852752.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:52.933Z,1478852752.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:52.966Z,1478852752.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:53.337Z,1478852753.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:53.379Z,1478852753.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:53.733Z,1478852753.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:53.765Z,1478852753.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:54.133Z,1478852754.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:54.159Z,1478852754.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:54.533Z,1478852754.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:54.591Z,1478852754.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:54.939Z,1478852754.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:54.965Z,1478852754.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:55.343Z,1478852755.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:55.361Z,1478852755.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:55.743Z,1478852755.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:55.766Z,1478852755.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:56.140Z,1478852756.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:56.170Z,1478852756.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:56.534Z,1478852756.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:56.558Z,1478852756.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:56.934Z,1478852756.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:56.974Z,1478852756.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:57.333Z,1478852757.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:57.349Z,1478852757.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:57.733Z,1478852757.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:57.749Z,1478852757.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:58.133Z,1478852758.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:58.153Z,1478852758.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:58.537Z,1478852758.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:58.568Z,1478852758.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:58.940Z,1478852758.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:58.988Z,1478852758.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:59.340Z,1478852759.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:59.365Z,1478852759.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:25:59.740Z,1478852759.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:25:59.764Z,1478852759.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:00.133Z,1478852760.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:00.172Z,1478852760.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:00.533Z,1478852760.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:00.583Z,1478852760.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:00.943Z,1478852760.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:00.985Z,1478852760.986 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:00.986Z,1478852760.986 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2016-11-11T08:26:00.986Z,1478852760.986 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:26:01.004Z,1478852761.004 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:01.005Z,1478852761.005 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 53
2016-11-11T08:26:01.005Z,1478852761.005 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:26:01.007Z,1478852761.007 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:01.008Z,1478852761.008 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 53
2016-11-11T08:26:01.008Z,1478852761.008 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:26:01.038Z,1478852761.038 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:26:01.038Z,1478852761.038 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:26:01.039Z,1478852761.039 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:26:01.339Z,1478852761.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:01.392Z,1478852761.392 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:26:01.392Z,1478852761.392 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2016-11-11T08:26:01.393Z,1478852761.393 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:26:01.393Z,1478852761.393 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 53
2016-11-11T08:26:01.393Z,1478852761.393 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:26:01.394Z,1478852761.394 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 53
2016-11-11T08:26:01.742Z,1478852761.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:01.756Z,1478852761.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:26:01.757Z,1478852761.757 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:26:01.757Z,1478852761.757 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:26:01.762Z,1478852761.762 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:26:01.762Z,1478852761.762 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:26:01.762Z,1478852761.762 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:26:01.763Z,1478852761.763 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:26:01.763Z,1478852761.763 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:26:01.764Z,1478852761.764 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:26:02.143Z,1478852762.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:02.214Z,1478852762.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:02.572Z,1478852762.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:02.637Z,1478852762.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:02.956Z,1478852762.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:02.984Z,1478852762.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:03.339Z,1478852763.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:03.369Z,1478852763.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:03.737Z,1478852763.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:03.772Z,1478852763.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:04.137Z,1478852764.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:04.173Z,1478852764.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:04.548Z,1478852764.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:04.593Z,1478852764.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:04.936Z,1478852764.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:04.963Z,1478852764.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:05.333Z,1478852765.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:05.399Z,1478852765.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:05.750Z,1478852765.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:05.767Z,1478852765.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:06.151Z,1478852766.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:06.209Z,1478852766.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:06.611Z,1478852766.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:06.682Z,1478852766.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:06.933Z,1478852766.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:06.971Z,1478852766.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:07.341Z,1478852767.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:07.375Z,1478852767.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:07.748Z,1478852767.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:07.781Z,1478852767.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:08.165Z,1478852768.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:08.209Z,1478852768.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:08.543Z,1478852768.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:08.616Z,1478852768.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:08.937Z,1478852768.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:08.982Z,1478852768.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:09.343Z,1478852769.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:09.350Z,1478852769.349 [PNI_TCM](ERROR): CRC does not match. Expected:0x7673 got:0x7361
2016-11-11T08:26:09.393Z,1478852769.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:09.740Z,1478852769.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:09.755Z,1478852769.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:10.145Z,1478852770.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:10.213Z,1478852770.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:10.533Z,1478852770.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:10.569Z,1478852770.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:10.936Z,1478852770.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:10.942Z,1478852770.943 [PNI_TCM](ERROR): CRC does not match. Expected:0x32143 got:0x4783
2016-11-11T08:26:10.970Z,1478852770.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:11.336Z,1478852771.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:11.369Z,1478852771.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:11.733Z,1478852771.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:11.768Z,1478852771.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:12.133Z,1478852772.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:12.243Z,1478852772.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:12.539Z,1478852772.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:12.561Z,1478852772.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:12.940Z,1478852772.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:12.991Z,1478852772.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:13.337Z,1478852773.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:13.378Z,1478852773.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:13.739Z,1478852773.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:13.746Z,1478852773.746 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T08:26:13.789Z,1478852773.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:14.139Z,1478852774.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:14.161Z,1478852774.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:14.548Z,1478852774.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:14.564Z,1478852774.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:14.939Z,1478852774.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:14.966Z,1478852774.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:15.344Z,1478852775.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:15.350Z,1478852775.351 [PNI_TCM](ERROR): CRC does not match. Expected:0x56805 got:0x4415
2016-11-11T08:26:15.370Z,1478852775.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:15.742Z,1478852775.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:15.761Z,1478852775.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:16.149Z,1478852776.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:16.217Z,1478852776.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:16.533Z,1478852776.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:16.568Z,1478852776.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:16.936Z,1478852776.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:16.971Z,1478852776.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:17.335Z,1478852777.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:17.366Z,1478852777.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:17.737Z,1478852777.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:17.769Z,1478852777.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:18.133Z,1478852778.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:18.172Z,1478852778.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:18.535Z,1478852778.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:18.589Z,1478852778.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:18.942Z,1478852778.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:18.968Z,1478852778.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:19.365Z,1478852779.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:19.425Z,1478852779.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:19.748Z,1478852779.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:19.781Z,1478852779.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:20.139Z,1478852780.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:20.197Z,1478852780.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:20.584Z,1478852780.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:20.662Z,1478852780.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:20.937Z,1478852780.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:20.971Z,1478852780.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:21.351Z,1478852781.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:21.366Z,1478852781.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:21.734Z,1478852781.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:21.773Z,1478852781.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:22.137Z,1478852782.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:22.169Z,1478852782.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:22.606Z,1478852782.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:22.627Z,1478852782.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:22.939Z,1478852782.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:22.985Z,1478852782.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:23.353Z,1478852783.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:23.379Z,1478852783.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:23.786Z,1478852783.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:23.802Z,1478852783.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:24.137Z,1478852784.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:24.217Z,1478852784.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:24.548Z,1478852784.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:24.585Z,1478852784.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:24.953Z,1478852784.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:24.973Z,1478852784.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:25.366Z,1478852785.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:25.405Z,1478852785.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:25.748Z,1478852785.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:25.769Z,1478852785.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:26.135Z,1478852786.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:26.210Z,1478852786.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:26.541Z,1478852786.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:26.581Z,1478852786.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:26.941Z,1478852786.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:26.961Z,1478852786.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:27.341Z,1478852787.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:27.356Z,1478852787.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:27.737Z,1478852787.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:27.769Z,1478852787.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:28.166Z,1478852788.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:28.218Z,1478852788.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:28.533Z,1478852788.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:28.565Z,1478852788.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:28.940Z,1478852788.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:28.975Z,1478852788.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:29.335Z,1478852789.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:29.371Z,1478852789.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:29.737Z,1478852789.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:29.760Z,1478852789.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:30.133Z,1478852790.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:30.214Z,1478852790.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:30.541Z,1478852790.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:30.561Z,1478852790.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:30.945Z,1478852790.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:30.965Z,1478852790.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:31.344Z,1478852791.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:31.360Z,1478852791.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:31.741Z,1478852791.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:31.761Z,1478852791.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:32.136Z,1478852792.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:32.234Z,1478852792.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:32.538Z,1478852792.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:32.590Z,1478852792.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:32.944Z,1478852792.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:32.976Z,1478852792.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:33.337Z,1478852793.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:33.390Z,1478852793.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:33.733Z,1478852793.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:33.771Z,1478852793.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:34.138Z,1478852794.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:34.189Z,1478852794.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:34.570Z,1478852794.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:34.633Z,1478852794.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:34.938Z,1478852794.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:34.988Z,1478852794.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:35.337Z,1478852795.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:35.357Z,1478852795.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:35.742Z,1478852795.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:35.757Z,1478852795.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:36.138Z,1478852796.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:36.176Z,1478852796.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:36.570Z,1478852796.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:36.605Z,1478852796.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:36.942Z,1478852796.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:36.984Z,1478852796.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:37.337Z,1478852797.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:37.365Z,1478852797.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:37.737Z,1478852797.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:37.776Z,1478852797.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:38.148Z,1478852798.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:38.230Z,1478852798.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:38.541Z,1478852798.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:38.568Z,1478852798.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:38.941Z,1478852798.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:38.977Z,1478852798.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:39.339Z,1478852799.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:39.354Z,1478852799.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:39.745Z,1478852799.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:39.760Z,1478852799.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:40.185Z,1478852800.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:40.237Z,1478852800.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:40.575Z,1478852800.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:40.602Z,1478852800.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:40.937Z,1478852800.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:41.000Z,1478852801.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:41.341Z,1478852801.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:41.384Z,1478852801.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:41.745Z,1478852801.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:41.781Z,1478852801.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:42.236Z,1478852802.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:42.288Z,1478852802.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:42.553Z,1478852802.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:42.573Z,1478852802.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:42.933Z,1478852802.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:42.959Z,1478852802.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:43.345Z,1478852803.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:43.361Z,1478852803.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:43.733Z,1478852803.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:43.765Z,1478852803.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:44.183Z,1478852804.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:44.242Z,1478852804.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:44.533Z,1478852804.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:44.569Z,1478852804.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:44.937Z,1478852804.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:44.952Z,1478852804.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:45.337Z,1478852805.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:45.357Z,1478852805.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:45.737Z,1478852805.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:45.752Z,1478852805.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:46.141Z,1478852806.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:46.156Z,1478852806.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:46.533Z,1478852806.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:46.589Z,1478852806.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:46.943Z,1478852806.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:47.009Z,1478852807.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:47.337Z,1478852807.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:47.381Z,1478852807.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:47.737Z,1478852807.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:47.752Z,1478852807.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:48.142Z,1478852808.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:48.191Z,1478852808.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:51.517Z,1478852811.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:51.549Z,1478852811.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:51.646Z,1478852811.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:51.701Z,1478852811.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:52.045Z,1478852812.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:52.097Z,1478852812.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:52.447Z,1478852812.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:52.473Z,1478852812.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:52.847Z,1478852812.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:52.866Z,1478852812.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:53.253Z,1478852813.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:53.268Z,1478852813.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:53.641Z,1478852813.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:53.681Z,1478852813.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:54.045Z,1478852814.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:54.075Z,1478852814.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:54.441Z,1478852814.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:54.477Z,1478852814.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:54.841Z,1478852814.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:54.877Z,1478852814.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:55.241Z,1478852815.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:55.264Z,1478852815.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:55.645Z,1478852815.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:55.684Z,1478852815.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:56.041Z,1478852816.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:56.080Z,1478852816.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:56.441Z,1478852816.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:56.456Z,1478852816.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:56.853Z,1478852816.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:56.870Z,1478852816.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:57.241Z,1478852817.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:57.280Z,1478852817.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:57.641Z,1478852817.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:57.677Z,1478852817.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:58.041Z,1478852818.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:58.086Z,1478852818.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:58.441Z,1478852818.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:58.478Z,1478852818.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:58.841Z,1478852818.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:58.877Z,1478852818.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:59.240Z,1478852819.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:59.279Z,1478852819.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:26:59.645Z,1478852819.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:26:59.681Z,1478852819.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:00.041Z,1478852820.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:00.069Z,1478852820.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:00.449Z,1478852820.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:00.478Z,1478852820.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:00.842Z,1478852820.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:00.872Z,1478852820.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:01.249Z,1478852821.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:01.288Z,1478852821.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:01.653Z,1478852821.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:01.673Z,1478852821.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:02.047Z,1478852822.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:02.069Z,1478852822.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:02.447Z,1478852822.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:02.540Z,1478852822.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:02.853Z,1478852822.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:02.885Z,1478852822.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:03.241Z,1478852823.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:03.270Z,1478852823.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:03.656Z,1478852823.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:03.677Z,1478852823.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:04.043Z,1478852824.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:04.129Z,1478852824.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:04.441Z,1478852824.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:04.532Z,1478852824.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:04.850Z,1478852824.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:04.909Z,1478852824.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:05.250Z,1478852825.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:05.257Z,1478852825.257 [PNI_TCM](ERROR): CRC does not match. Expected:0x650 got:0x6572
2016-11-11T08:27:05.298Z,1478852825.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:05.651Z,1478852825.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:05.700Z,1478852825.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:06.048Z,1478852826.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:06.142Z,1478852826.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:06.441Z,1478852826.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:06.473Z,1478852826.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:06.841Z,1478852826.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:06.877Z,1478852826.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:07.243Z,1478852827.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:07.275Z,1478852827.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:07.641Z,1478852827.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:07.684Z,1478852827.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:08.041Z,1478852828.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:08.127Z,1478852828.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:08.451Z,1478852828.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:08.466Z,1478852828.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:08.853Z,1478852828.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:08.882Z,1478852828.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:09.241Z,1478852829.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:09.273Z,1478852829.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:09.641Z,1478852829.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:09.677Z,1478852829.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:10.043Z,1478852830.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:10.072Z,1478852830.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:10.443Z,1478852830.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:10.488Z,1478852830.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:10.841Z,1478852830.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:10.881Z,1478852830.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:11.241Z,1478852831.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:11.300Z,1478852831.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:11.646Z,1478852831.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:11.661Z,1478852831.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:12.049Z,1478852832.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:12.065Z,1478852832.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:12.449Z,1478852832.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:12.478Z,1478852832.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:12.860Z,1478852832.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:12.866Z,1478852832.866 [PNI_TCM](ERROR): CRC does not match. Expected:0x37601 got:0x19740
2016-11-11T08:27:12.905Z,1478852832.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:13.243Z,1478852833.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:13.279Z,1478852833.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:13.643Z,1478852833.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:13.677Z,1478852833.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:14.041Z,1478852834.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:14.081Z,1478852834.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:14.446Z,1478852834.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:14.477Z,1478852834.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:14.845Z,1478852834.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:14.869Z,1478852834.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:15.242Z,1478852835.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:15.273Z,1478852835.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:15.651Z,1478852835.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:15.668Z,1478852835.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:16.049Z,1478852836.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:16.069Z,1478852836.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:16.458Z,1478852836.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:16.509Z,1478852836.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:16.842Z,1478852836.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:16.877Z,1478852836.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:17.245Z,1478852837.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:17.289Z,1478852837.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:17.649Z,1478852837.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:17.664Z,1478852837.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:18.050Z,1478852838.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:18.101Z,1478852838.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:18.463Z,1478852838.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:18.537Z,1478852838.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:18.846Z,1478852838.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:18.874Z,1478852838.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:19.245Z,1478852839.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:19.277Z,1478852839.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:19.643Z,1478852839.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:19.686Z,1478852839.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:20.041Z,1478852840.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:20.132Z,1478852840.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:20.446Z,1478852840.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:20.495Z,1478852840.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:20.847Z,1478852840.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:20.869Z,1478852840.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:21.245Z,1478852841.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:21.286Z,1478852841.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:21.648Z,1478852841.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:21.664Z,1478852841.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:22.047Z,1478852842.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:22.104Z,1478852842.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:22.448Z,1478852842.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:22.483Z,1478852842.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:22.845Z,1478852842.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:22.860Z,1478852842.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:23.241Z,1478852843.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:23.269Z,1478852843.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:23.649Z,1478852843.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:23.669Z,1478852843.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:24.050Z,1478852844.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:24.127Z,1478852844.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:24.441Z,1478852844.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:24.474Z,1478852844.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:24.848Z,1478852844.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:24.871Z,1478852844.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:25.247Z,1478852845.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:25.275Z,1478852845.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:25.643Z,1478852845.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:25.677Z,1478852845.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:26.045Z,1478852846.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:26.135Z,1478852846.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:26.441Z,1478852846.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:26.472Z,1478852846.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:26.843Z,1478852846.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:26.858Z,1478852846.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:27.246Z,1478852847.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:27.273Z,1478852847.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:27.649Z,1478852847.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:27.664Z,1478852847.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:28.047Z,1478852848.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:28.069Z,1478852848.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:28.451Z,1478852848.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:28.477Z,1478852848.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:28.842Z,1478852848.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:28.877Z,1478852848.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:29.241Z,1478852849.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:29.277Z,1478852849.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:29.645Z,1478852849.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:29.678Z,1478852849.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:30.043Z,1478852850.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:30.059Z,1478852850.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:30.461Z,1478852850.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:30.498Z,1478852850.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:30.849Z,1478852850.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:30.876Z,1478852850.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:31.245Z,1478852851.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:31.277Z,1478852851.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:31.643Z,1478852851.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:31.671Z,1478852851.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:32.041Z,1478852852.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:32.085Z,1478852852.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:32.451Z,1478852852.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:32.513Z,1478852852.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:32.845Z,1478852852.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:32.860Z,1478852852.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:33.246Z,1478852853.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:33.319Z,1478852853.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:33.647Z,1478852853.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:33.662Z,1478852853.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:34.051Z,1478852854.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:34.125Z,1478852854.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:34.441Z,1478852854.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:34.490Z,1478852854.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:34.842Z,1478852854.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:34.869Z,1478852854.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:35.241Z,1478852855.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:35.293Z,1478852855.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:35.640Z,1478852855.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:35.689Z,1478852855.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:36.046Z,1478852856.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:36.124Z,1478852856.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:36.445Z,1478852856.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:36.465Z,1478852856.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:36.853Z,1478852856.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:36.868Z,1478852856.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:37.247Z,1478852857.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:37.262Z,1478852857.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:37.648Z,1478852857.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:37.669Z,1478852857.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:38.063Z,1478852858.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:38.120Z,1478852858.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:38.441Z,1478852858.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:38.477Z,1478852858.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:38.841Z,1478852858.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:38.873Z,1478852858.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:39.241Z,1478852859.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:39.273Z,1478852859.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:39.641Z,1478852859.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:39.672Z,1478852859.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:40.054Z,1478852860.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:40.143Z,1478852860.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:40.445Z,1478852860.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:40.465Z,1478852860.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:40.849Z,1478852860.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:40.864Z,1478852860.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:41.248Z,1478852861.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:41.263Z,1478852861.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:41.644Z,1478852861.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:41.677Z,1478852861.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:42.049Z,1478852862.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:42.064Z,1478852862.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:42.453Z,1478852862.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:42.485Z,1478852862.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:42.841Z,1478852862.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:42.877Z,1478852862.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:43.242Z,1478852863.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:43.277Z,1478852863.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:43.372Z,1478852863.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:43.641Z,1478852863.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:43.678Z,1478852863.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:44.041Z,1478852864.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:44.078Z,1478852864.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:44.168Z,1478852864.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:44.463Z,1478852864.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:44.495Z,1478852864.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:44.841Z,1478852864.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:44.885Z,1478852864.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:45.241Z,1478852865.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:45.277Z,1478852865.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:45.644Z,1478852865.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:45.660Z,1478852865.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:46.047Z,1478852866.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:46.069Z,1478852866.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:46.459Z,1478852866.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:46.502Z,1478852866.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:46.841Z,1478852866.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:46.877Z,1478852866.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:47.249Z,1478852867.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:47.281Z,1478852867.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:47.641Z,1478852867.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:47.702Z,1478852867.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:48.098Z,1478852868.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:48.197Z,1478852868.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:48.449Z,1478852868.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:48.465Z,1478852868.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:51.782Z,1478852871.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:51.826Z,1478852871.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:51.921Z,1478852871.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:51.964Z,1478852871.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:52.297Z,1478852872.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:52.345Z,1478852872.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:52.697Z,1478852872.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:52.749Z,1478852872.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:53.097Z,1478852873.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:53.128Z,1478852873.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:53.497Z,1478852873.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:53.540Z,1478852873.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:53.909Z,1478852873.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:53.950Z,1478852873.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:54.299Z,1478852874.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:54.385Z,1478852874.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:54.702Z,1478852874.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:54.717Z,1478852874.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:55.106Z,1478852875.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:55.126Z,1478852875.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:55.536Z,1478852875.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:55.580Z,1478852875.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:55.902Z,1478852875.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:55.945Z,1478852875.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:56.307Z,1478852876.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:56.334Z,1478852876.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:56.699Z,1478852876.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:56.735Z,1478852876.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:57.099Z,1478852877.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:57.141Z,1478852877.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:57.360Z,1478852877.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:57.504Z,1478852877.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:57.544Z,1478852877.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:57.910Z,1478852877.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:57.934Z,1478852877.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:58.156Z,1478852878.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:58.308Z,1478852878.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:58.340Z,1478852878.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:58.707Z,1478852878.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:58.746Z,1478852878.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:59.099Z,1478852879.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:59.128Z,1478852879.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:59.498Z,1478852879.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:59.549Z,1478852879.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:27:59.900Z,1478852879.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:27:59.943Z,1478852879.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:00.299Z,1478852880.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:00.347Z,1478852880.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:00.697Z,1478852880.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:00.754Z,1478852880.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:01.108Z,1478852881.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:01.128Z,1478852881.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:01.500Z,1478852881.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:01.536Z,1478852881.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:01.899Z,1478852881.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:01.950Z,1478852881.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:02.297Z,1478852882.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:02.329Z,1478852882.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:02.706Z,1478852882.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:02.737Z,1478852882.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:03.105Z,1478852883.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:03.147Z,1478852883.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:03.507Z,1478852883.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:03.523Z,1478852883.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:03.928Z,1478852883.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:03.952Z,1478852883.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:04.297Z,1478852884.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:04.324Z,1478852884.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:04.713Z,1478852884.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:04.804Z,1478852884.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:05.097Z,1478852885.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:05.112Z,1478852885.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:05.499Z,1478852885.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:05.534Z,1478852885.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:05.921Z,1478852885.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:05.981Z,1478852885.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:06.298Z,1478852886.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:06.313Z,1478852886.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:06.710Z,1478852886.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:06.761Z,1478852886.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:07.101Z,1478852887.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:07.158Z,1478852887.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:07.502Z,1478852887.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:07.521Z,1478852887.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:07.903Z,1478852887.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:07.925Z,1478852887.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:08.303Z,1478852888.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:08.341Z,1478852888.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:08.700Z,1478852888.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:08.748Z,1478852888.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:09.106Z,1478852889.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:09.133Z,1478852889.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:09.499Z,1478852889.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:09.565Z,1478852889.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:09.908Z,1478852889.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:09.932Z,1478852889.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:10.299Z,1478852890.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:10.361Z,1478852890.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:10.703Z,1478852890.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:10.753Z,1478852890.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:11.106Z,1478852891.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:11.156Z,1478852891.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:11.506Z,1478852891.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:11.537Z,1478852891.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:11.899Z,1478852891.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:11.951Z,1478852891.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:12.299Z,1478852892.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:12.334Z,1478852892.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:12.699Z,1478852892.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:12.745Z,1478852892.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:13.102Z,1478852893.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:13.117Z,1478852893.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:13.506Z,1478852893.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:13.526Z,1478852893.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:13.906Z,1478852893.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:13.934Z,1478852893.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:14.304Z,1478852894.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:14.338Z,1478852894.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:14.699Z,1478852894.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:14.748Z,1478852894.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:15.103Z,1478852895.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:15.169Z,1478852895.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:15.505Z,1478852895.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:15.568Z,1478852895.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:15.906Z,1478852895.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:15.955Z,1478852895.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:16.300Z,1478852896.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:16.341Z,1478852896.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:16.698Z,1478852896.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:16.764Z,1478852896.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:17.099Z,1478852897.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:17.134Z,1478852897.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:17.497Z,1478852897.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:17.537Z,1478852897.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:17.897Z,1478852897.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:17.928Z,1478852897.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:18.297Z,1478852898.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:18.339Z,1478852898.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:18.701Z,1478852898.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:18.748Z,1478852898.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:19.097Z,1478852899.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:19.112Z,1478852899.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:19.504Z,1478852899.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:19.593Z,1478852899.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:19.904Z,1478852899.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:19.919Z,1478852899.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:20.297Z,1478852900.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:20.338Z,1478852900.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:20.697Z,1478852900.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:20.733Z,1478852900.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:21.104Z,1478852901.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:21.174Z,1478852901.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:21.497Z,1478852901.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:21.543Z,1478852901.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:21.897Z,1478852901.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:21.922Z,1478852901.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:22.297Z,1478852902.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:22.333Z,1478852902.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:22.697Z,1478852902.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:22.731Z,1478852902.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:23.108Z,1478852903.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:23.130Z,1478852903.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:23.497Z,1478852903.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:23.534Z,1478852903.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:23.897Z,1478852903.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:23.934Z,1478852903.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:24.313Z,1478852904.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:24.333Z,1478852904.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:24.697Z,1478852904.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:24.734Z,1478852904.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:25.097Z,1478852905.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:25.130Z,1478852905.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:25.497Z,1478852905.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:25.537Z,1478852905.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:25.897Z,1478852905.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:25.924Z,1478852905.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:26.297Z,1478852906.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:26.359Z,1478852906.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:26.708Z,1478852906.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:26.727Z,1478852906.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:27.105Z,1478852907.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:27.122Z,1478852907.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:27.513Z,1478852907.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:27.543Z,1478852907.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:27.900Z,1478852907.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:27.926Z,1478852907.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:28.305Z,1478852908.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:28.378Z,1478852908.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:28.702Z,1478852908.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:28.744Z,1478852908.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:29.098Z,1478852909.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:29.140Z,1478852909.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:29.497Z,1478852909.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:29.541Z,1478852909.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:29.897Z,1478852909.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:29.988Z,1478852909.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:30.298Z,1478852910.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:30.336Z,1478852910.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:30.712Z,1478852910.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:30.745Z,1478852910.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:31.097Z,1478852911.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:31.133Z,1478852911.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:31.227Z,1478852911.227 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T08:28:31.227Z,1478852911.227 [Rowe_600LCM] Communications Fault, FailCount= 1
2016-11-11T08:28:31.227Z,1478852911.227 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T08:28:31.497Z,1478852911.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:31.535Z,1478852911.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T08:28:31.536Z,1478852911.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:31.572Z,1478852911.572 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T08:28:31.631Z,1478852911.631 [Rowe_600LCM](INFO): Powering down
2016-11-11T08:28:31.898Z,1478852911.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:31.932Z,1478852911.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T08:28:31.933Z,1478852911.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:32.297Z,1478852912.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:32.337Z,1478852912.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:28:32.338Z,1478852912.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:32.697Z,1478852912.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:32.747Z,1478852912.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:28:32.752Z,1478852912.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:33.097Z,1478852913.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:33.140Z,1478852913.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:28:33.142Z,1478852913.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:33.162Z,1478852913.162 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T08:28:33.162Z,1478852913.162 [Rowe_600LCM] No Fault, FailCount= 1
2016-11-11T08:28:33.247Z,1478852913.247 [Rowe_600LCM](INFO): Initializing
2016-11-11T08:28:33.248Z,1478852913.248 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T08:28:33.248Z,1478852913.248 [Rowe_600LCM](INFO): LCM OK
2016-11-11T08:28:33.248Z,1478852913.248 [Rowe_600LCM](INFO): Powering up
2016-11-11T08:28:33.499Z,1478852913.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:33.575Z,1478852913.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:28:33.581Z,1478852913.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:33.905Z,1478852913.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:33.946Z,1478852913.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:28:33.947Z,1478852913.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:34.305Z,1478852914.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:34.354Z,1478852914.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T08:28:34.355Z,1478852914.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:34.707Z,1478852914.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:34.722Z,1478852914.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T08:28:34.723Z,1478852914.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:35.103Z,1478852915.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:35.157Z,1478852915.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T08:28:35.158Z,1478852915.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:35.505Z,1478852915.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:35.545Z,1478852915.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T08:28:35.547Z,1478852915.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:35.912Z,1478852915.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:35.978Z,1478852915.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T08:28:35.997Z,1478852915.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:36.308Z,1478852916.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:36.327Z,1478852916.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T08:28:36.348Z,1478852916.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:36.708Z,1478852916.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:36.723Z,1478852916.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T08:28:36.724Z,1478852916.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:37.105Z,1478852917.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:37.136Z,1478852917.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T08:28:37.137Z,1478852917.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:37.373Z,1478852917.374 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T08:28:37.442Z,1478852917.441 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T08:28:37.457Z,1478852917.457 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T08:28:37.458Z,1478852917.458 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T08:28:37.459Z,1478852917.459 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T08:28:37.532Z,1478852917.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:37.566Z,1478852917.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T08:28:37.575Z,1478852917.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:37.941Z,1478852917.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:37.985Z,1478852917.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:38.321Z,1478852918.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:38.394Z,1478852918.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:38.715Z,1478852918.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:38.742Z,1478852918.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:39.106Z,1478852919.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:39.136Z,1478852919.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:39.504Z,1478852919.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:39.535Z,1478852919.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:39.911Z,1478852919.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:39.927Z,1478852919.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:40.310Z,1478852920.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:40.341Z,1478852920.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:40.708Z,1478852920.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:40.715Z,1478852920.715 [PNI_TCM](ERROR): CRC does not match. Expected:0x13716 got:0x56327
2016-11-11T08:28:40.734Z,1478852920.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:41.101Z,1478852921.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:41.137Z,1478852921.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:41.500Z,1478852921.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:41.533Z,1478852921.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:41.898Z,1478852921.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:41.962Z,1478852921.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:42.298Z,1478852922.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:42.308Z,1478852922.308 [PNI_TCM](ERROR): CRC does not match. Expected:0x49361 got:0x7196
2016-11-11T08:28:42.343Z,1478852922.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:42.704Z,1478852922.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:42.719Z,1478852922.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:43.103Z,1478852923.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:43.145Z,1478852923.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:43.501Z,1478852923.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:43.537Z,1478852923.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:43.903Z,1478852923.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:43.911Z,1478852923.911 [PNI_TCM](ERROR): CRC does not match. Expected:0x54338 got:0x16935
2016-11-11T08:28:43.996Z,1478852923.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:44.304Z,1478852924.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:44.321Z,1478852924.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:44.701Z,1478852924.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:44.717Z,1478852924.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:45.097Z,1478852925.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:45.126Z,1478852925.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:45.503Z,1478852925.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:45.509Z,1478852925.509 [PNI_TCM](ERROR): CRC does not match. Expected:0x39601 got:0x53786
2016-11-11T08:28:45.537Z,1478852925.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:45.903Z,1478852925.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:45.919Z,1478852925.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:46.298Z,1478852926.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:46.314Z,1478852926.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:46.702Z,1478852926.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:46.720Z,1478852926.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:47.103Z,1478852927.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:47.119Z,1478852927.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:47.504Z,1478852927.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:47.521Z,1478852927.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:47.901Z,1478852927.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:47.994Z,1478852927.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:48.303Z,1478852928.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:48.320Z,1478852928.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:48.704Z,1478852928.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:48.742Z,1478852928.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:52.191Z,1478852932.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:52.206Z,1478852932.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:52.305Z,1478852932.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:52.353Z,1478852932.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:52.698Z,1478852932.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:52.750Z,1478852932.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:53.058Z,1478852933.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:53.085Z,1478852933.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:53.467Z,1478852933.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:53.498Z,1478852933.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:53.870Z,1478852933.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:53.888Z,1478852933.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:54.326Z,1478852934.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:54.374Z,1478852934.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:54.672Z,1478852934.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:54.713Z,1478852934.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:55.059Z,1478852935.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:55.089Z,1478852935.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:55.470Z,1478852935.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:55.487Z,1478852935.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:55.860Z,1478852935.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:55.889Z,1478852935.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:56.296Z,1478852936.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:56.354Z,1478852936.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:56.659Z,1478852936.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:56.699Z,1478852936.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:57.059Z,1478852937.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:57.086Z,1478852937.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:57.461Z,1478852937.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:57.505Z,1478852937.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:57.859Z,1478852937.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:57.895Z,1478852937.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:58.266Z,1478852938.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:58.285Z,1478852938.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:58.676Z,1478852938.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:58.691Z,1478852938.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:59.069Z,1478852939.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:59.084Z,1478852939.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:59.467Z,1478852939.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:59.505Z,1478852939.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:28:59.859Z,1478852939.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:28:59.878Z,1478852939.878 [PNI_TCM](ERROR): CRC does not match. Expected:0x51138 got:0x45889
2016-11-11T08:28:59.898Z,1478852939.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:00.265Z,1478852940.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:00.291Z,1478852940.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:00.668Z,1478852940.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:00.701Z,1478852940.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:01.059Z,1478852941.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:01.103Z,1478852941.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:01.459Z,1478852941.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:01.478Z,1478852941.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:01.865Z,1478852941.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:01.881Z,1478852941.881 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:01.881Z,1478852941.881 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2016-11-11T08:29:01.881Z,1478852941.881 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:29:01.944Z,1478852941.944 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:01.944Z,1478852941.944 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 54
2016-11-11T08:29:01.944Z,1478852941.944 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:29:01.956Z,1478852941.956 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:01.956Z,1478852941.956 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 54
2016-11-11T08:29:01.956Z,1478852941.956 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:29:02.008Z,1478852942.008 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:29:02.008Z,1478852942.008 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:29:02.009Z,1478852942.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:29:02.269Z,1478852942.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:02.330Z,1478852942.330 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:29:02.330Z,1478852942.330 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2016-11-11T08:29:02.331Z,1478852942.331 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:29:02.331Z,1478852942.331 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 54
2016-11-11T08:29:02.331Z,1478852942.331 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:29:02.331Z,1478852942.331 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 54
2016-11-11T08:29:02.661Z,1478852942.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:02.696Z,1478852942.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:29:02.696Z,1478852942.696 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:29:02.696Z,1478852942.696 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:29:02.701Z,1478852942.701 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:29:02.701Z,1478852942.701 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:29:02.702Z,1478852942.702 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:29:02.702Z,1478852942.702 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:29:02.703Z,1478852942.703 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:29:02.727Z,1478852942.727 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:29:03.059Z,1478852943.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:03.096Z,1478852943.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:03.461Z,1478852943.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:03.493Z,1478852943.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:03.866Z,1478852943.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:03.892Z,1478852943.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:04.259Z,1478852944.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:04.301Z,1478852944.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:04.659Z,1478852944.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:04.678Z,1478852944.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:05.068Z,1478852945.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:05.144Z,1478852945.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:05.489Z,1478852945.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:05.529Z,1478852945.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:05.877Z,1478852945.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:05.928Z,1478852945.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:06.262Z,1478852946.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:06.290Z,1478852946.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:06.663Z,1478852946.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:06.717Z,1478852946.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:07.068Z,1478852947.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:07.109Z,1478852947.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:07.465Z,1478852947.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:07.508Z,1478852947.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:07.864Z,1478852947.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:07.876Z,1478852947.876 [PNI_TCM](ERROR): CRC does not match. Expected:0x13714 got:0x62687
2016-11-11T08:29:07.899Z,1478852947.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:08.322Z,1478852948.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:08.374Z,1478852948.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:08.675Z,1478852948.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:08.697Z,1478852948.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:09.080Z,1478852949.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:09.111Z,1478852949.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:09.459Z,1478852949.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:09.493Z,1478852949.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:09.869Z,1478852949.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:09.903Z,1478852949.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:10.317Z,1478852950.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:10.366Z,1478852950.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:10.668Z,1478852950.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:10.684Z,1478852950.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:11.088Z,1478852951.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:11.124Z,1478852951.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:11.463Z,1478852951.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:11.501Z,1478852951.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:11.859Z,1478852951.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:11.965Z,1478852951.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:12.264Z,1478852952.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:12.291Z,1478852952.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:12.661Z,1478852952.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:12.694Z,1478852952.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:13.064Z,1478852953.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:13.098Z,1478852953.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:13.459Z,1478852953.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:13.486Z,1478852953.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:13.870Z,1478852953.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:13.949Z,1478852953.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:14.274Z,1478852954.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:14.289Z,1478852954.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:14.672Z,1478852954.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:14.687Z,1478852954.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:15.069Z,1478852955.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:15.085Z,1478852955.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:15.474Z,1478852955.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:15.497Z,1478852955.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:15.862Z,1478852955.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:15.918Z,1478852955.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:16.263Z,1478852956.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:16.295Z,1478852956.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:16.664Z,1478852956.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:16.687Z,1478852956.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:17.064Z,1478852957.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:17.097Z,1478852957.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:17.465Z,1478852957.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:17.493Z,1478852957.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:17.869Z,1478852957.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:17.940Z,1478852957.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:18.260Z,1478852958.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:18.296Z,1478852958.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:18.662Z,1478852958.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:18.697Z,1478852958.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:19.062Z,1478852959.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:19.161Z,1478852959.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:19.459Z,1478852959.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:19.475Z,1478852959.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:19.859Z,1478852959.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:19.876Z,1478852959.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:20.273Z,1478852960.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:20.318Z,1478852960.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:20.668Z,1478852960.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:20.684Z,1478852960.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:21.066Z,1478852961.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:21.120Z,1478852961.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:21.461Z,1478852961.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:21.490Z,1478852961.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:21.873Z,1478852961.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:21.921Z,1478852961.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:22.312Z,1478852962.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:22.364Z,1478852962.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:22.670Z,1478852962.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:22.711Z,1478852962.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:23.068Z,1478852963.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:23.083Z,1478852963.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:23.472Z,1478852963.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:23.487Z,1478852963.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:23.869Z,1478852963.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:23.885Z,1478852963.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:24.284Z,1478852964.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:24.333Z,1478852964.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:24.659Z,1478852964.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:24.695Z,1478852964.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:25.073Z,1478852965.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:25.089Z,1478852965.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:25.473Z,1478852965.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:25.493Z,1478852965.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:25.883Z,1478852965.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:25.945Z,1478852965.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:26.278Z,1478852966.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:26.327Z,1478852966.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:26.668Z,1478852966.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:26.683Z,1478852966.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:27.074Z,1478852967.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:27.089Z,1478852967.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:27.477Z,1478852967.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:27.492Z,1478852967.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:27.915Z,1478852967.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:27.989Z,1478852967.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:28.266Z,1478852968.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:28.302Z,1478852968.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:28.663Z,1478852968.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:28.694Z,1478852968.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:29.067Z,1478852969.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:29.097Z,1478852969.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:29.462Z,1478852969.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:29.478Z,1478852969.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:29.910Z,1478852969.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:29.961Z,1478852969.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:30.269Z,1478852970.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:30.289Z,1478852970.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:30.661Z,1478852970.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:30.688Z,1478852970.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:31.071Z,1478852971.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:31.086Z,1478852971.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:31.472Z,1478852971.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:31.488Z,1478852971.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:31.871Z,1478852971.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:31.940Z,1478852971.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:32.263Z,1478852972.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:32.278Z,1478852972.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:32.667Z,1478852972.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:32.682Z,1478852972.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:33.062Z,1478852973.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:33.078Z,1478852973.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:33.461Z,1478852973.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:33.513Z,1478852973.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:33.866Z,1478852973.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:33.937Z,1478852973.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:34.259Z,1478852974.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:34.297Z,1478852974.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:34.659Z,1478852974.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:34.706Z,1478852974.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:35.059Z,1478852975.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:35.073Z,1478852975.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:35.459Z,1478852975.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:35.505Z,1478852975.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:35.863Z,1478852975.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:35.906Z,1478852975.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:36.266Z,1478852976.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:36.324Z,1478852976.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:36.663Z,1478852976.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:36.678Z,1478852976.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:37.059Z,1478852977.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:37.086Z,1478852977.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:37.467Z,1478852977.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:37.481Z,1478852977.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:37.862Z,1478852977.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:37.894Z,1478852977.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:38.281Z,1478852978.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:38.325Z,1478852978.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:38.670Z,1478852978.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:38.685Z,1478852978.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:39.078Z,1478852979.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:39.109Z,1478852979.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:39.469Z,1478852979.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:39.494Z,1478852979.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:39.899Z,1478852979.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:39.930Z,1478852979.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:40.261Z,1478852980.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:40.284Z,1478852980.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:40.665Z,1478852980.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:40.701Z,1478852980.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:41.064Z,1478852981.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:41.085Z,1478852981.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:41.462Z,1478852981.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:41.478Z,1478852981.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:41.890Z,1478852981.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:41.954Z,1478852981.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:42.270Z,1478852982.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:42.285Z,1478852982.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:42.670Z,1478852982.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:42.698Z,1478852982.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:43.089Z,1478852983.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:43.129Z,1478852983.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:43.470Z,1478852983.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:43.485Z,1478852983.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:43.913Z,1478852983.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:43.942Z,1478852983.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:44.272Z,1478852984.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:44.305Z,1478852984.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:44.680Z,1478852984.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:44.734Z,1478852984.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:45.065Z,1478852985.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:45.092Z,1478852985.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:45.459Z,1478852985.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:45.486Z,1478852985.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:45.896Z,1478852985.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:45.920Z,1478852985.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:46.263Z,1478852986.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:46.278Z,1478852986.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:46.665Z,1478852986.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:46.701Z,1478852986.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:47.067Z,1478852987.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:47.075Z,1478852987.075 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T08:29:47.075Z,1478852987.075 [BPC1] Data Fault, FailCount= 1
2016-11-11T08:29:47.075Z,1478852987.075 [BPC1](ERROR): Data Fault
2016-11-11T08:29:47.083Z,1478852987.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:47.131Z,1478852987.131 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T08:29:47.467Z,1478852987.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:47.482Z,1478852987.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:47.867Z,1478852987.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:47.920Z,1478852987.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:47.949Z,1478852987.949 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T08:29:47.949Z,1478852987.949 [Default:CheckIn:C.Wait] Stopped
2016-11-11T08:29:47.950Z,1478852987.950 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T08:29:47.950Z,1478852987.950 [Default:CheckIn:D] Running Loop=1
2016-11-11T08:29:48.259Z,1478852988.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:48.293Z,1478852988.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:48.302Z,1478852988.302 [Default:CheckIn:D] Stopped
2016-11-11T08:29:48.302Z,1478852988.302 [Default:CheckIn:E] Running Loop=1
2016-11-11T08:29:48.313Z,1478852988.313 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:29:48.313Z,1478852988.313 [BPC1] No Fault, FailCount= 1
2016-11-11T08:29:48.659Z,1478852988.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:48.738Z,1478852988.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:48.747Z,1478852988.747 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 219.783187 min 
2016-11-11T08:29:48.747Z,1478852988.747 [Default:CheckIn:E] Stopped
2016-11-11T08:29:48.748Z,1478852988.747 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T08:29:48.748Z,1478852988.748 [Default:CheckIn] Stopped
2016-11-11T08:29:48.748Z,1478852988.748 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T08:29:48.748Z,1478852988.748 [Default:CheckIn](INFO): Running loop #22
2016-11-11T08:29:48.748Z,1478852988.748 [Default:CheckIn] Running Loop=22
2016-11-11T08:29:48.748Z,1478852988.748 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T08:29:48.748Z,1478852988.748 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T08:29:49.066Z,1478852989.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:49.093Z,1478852989.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:52.446Z,1478852992.446 [NAL9602](INFO): Powering up
2016-11-11T08:29:52.464Z,1478852992.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:52.526Z,1478852992.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:52.610Z,1478852992.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:52.634Z,1478852992.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:53.017Z,1478852993.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:53.032Z,1478852993.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:53.413Z,1478852993.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:53.428Z,1478852993.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:53.813Z,1478852993.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:53.886Z,1478852993.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:54.210Z,1478852994.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:54.236Z,1478852994.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:54.604Z,1478852994.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:54.639Z,1478852994.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:55.005Z,1478852995.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:55.032Z,1478852995.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:55.412Z,1478852995.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:55.441Z,1478852995.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:55.806Z,1478852995.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:55.917Z,1478852995.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:56.205Z,1478852996.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:56.241Z,1478852996.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:56.609Z,1478852996.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:56.641Z,1478852996.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:57.007Z,1478852997.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:57.050Z,1478852997.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:57.406Z,1478852997.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:57.421Z,1478852997.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:57.805Z,1478852997.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:57.894Z,1478852997.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:58.212Z,1478852998.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:58.227Z,1478852998.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:58.614Z,1478852998.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:58.629Z,1478852998.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:59.012Z,1478852999.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:59.026Z,1478852999.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:59.412Z,1478852999.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:59.427Z,1478852999.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:29:59.805Z,1478852999.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:29:59.899Z,1478852999.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:00.214Z,1478853000.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:00.238Z,1478853000.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:00.611Z,1478853000.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:00.630Z,1478853000.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:01.012Z,1478853001.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:01.040Z,1478853001.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:01.405Z,1478853001.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:01.437Z,1478853001.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:01.806Z,1478853001.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:01.841Z,1478853001.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:02.205Z,1478853002.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:02.252Z,1478853002.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:02.609Z,1478853002.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:02.653Z,1478853002.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:03.020Z,1478853003.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:03.056Z,1478853003.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:03.393Z,1478853003.393 [NAL9602](INFO): NAL9602 initialized
2016-11-11T08:30:03.410Z,1478853003.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:03.426Z,1478853003.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:03.813Z,1478853003.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:03.833Z,1478853003.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:04.206Z,1478853004.206 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T08:30:04.207Z,1478853004.207 [NAL9602] Data Fault, FailCount= 2
2016-11-11T08:30:04.207Z,1478853004.207 [NAL9602](ERROR): Data Fault
2016-11-11T08:30:04.237Z,1478853004.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:04.311Z,1478853004.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:04.354Z,1478853004.354 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T08:30:04.588Z,1478853004.588 [NAL9602](INFO): Powering down
2016-11-11T08:30:04.613Z,1478853004.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:04.673Z,1478853004.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:05.005Z,1478853005.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:05.039Z,1478853005.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:05.405Z,1478853005.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:05.438Z,1478853005.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:05.476Z,1478853005.476 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T08:30:05.476Z,1478853005.476 [NAL9602] No Fault, FailCount= 2
2016-11-11T08:30:05.805Z,1478853005.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:05.873Z,1478853005.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:06.247Z,1478853006.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:06.278Z,1478853006.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:06.605Z,1478853006.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:06.654Z,1478853006.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:07.005Z,1478853007.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:07.061Z,1478853007.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:07.409Z,1478853007.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:07.441Z,1478853007.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:07.854Z,1478853007.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:07.895Z,1478853007.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:08.205Z,1478853008.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:08.225Z,1478853008.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:08.610Z,1478853008.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:08.626Z,1478853008.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:09.012Z,1478853009.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:09.027Z,1478853009.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:09.411Z,1478853009.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:09.426Z,1478853009.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:09.789Z,1478853009.789 [NAL9602](INFO): Powering up NAL9602
2016-11-11T08:30:09.821Z,1478853009.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:09.874Z,1478853009.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:10.213Z,1478853010.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:10.233Z,1478853010.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:10.605Z,1478853010.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:10.637Z,1478853010.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:11.005Z,1478853011.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:11.038Z,1478853011.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:11.405Z,1478853011.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:11.438Z,1478853011.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:11.819Z,1478853011.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:11.863Z,1478853011.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:12.213Z,1478853012.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:12.257Z,1478853012.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:12.605Z,1478853012.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:12.625Z,1478853012.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:13.005Z,1478853013.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:13.041Z,1478853013.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:13.409Z,1478853013.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:13.457Z,1478853013.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:13.874Z,1478853013.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:13.902Z,1478853013.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:14.209Z,1478853014.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:14.229Z,1478853014.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:14.609Z,1478853014.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:14.624Z,1478853014.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:15.012Z,1478853015.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:15.027Z,1478853015.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:15.407Z,1478853015.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:15.430Z,1478853015.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:15.805Z,1478853015.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:15.875Z,1478853015.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:16.205Z,1478853016.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:16.241Z,1478853016.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:16.611Z,1478853016.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:16.626Z,1478853016.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:17.013Z,1478853017.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:17.028Z,1478853017.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:17.156Z,1478853017.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:17.412Z,1478853017.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:17.426Z,1478853017.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:17.808Z,1478853017.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:17.832Z,1478853017.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:17.952Z,1478853017.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:18.213Z,1478853018.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:18.257Z,1478853018.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:18.605Z,1478853018.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:18.620Z,1478853018.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:19.009Z,1478853019.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:19.066Z,1478853019.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:19.409Z,1478853019.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:19.461Z,1478853019.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:19.812Z,1478853019.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:19.833Z,1478853019.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:20.229Z,1478853020.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:20.289Z,1478853020.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:20.593Z,1478853020.593 [NAL9602](INFO): NAL9602 initialized
2016-11-11T08:30:20.617Z,1478853020.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:20.640Z,1478853020.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:21.005Z,1478853021.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:21.054Z,1478853021.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:21.420Z,1478853021.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:21.479Z,1478853021.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:21.837Z,1478853021.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:21.867Z,1478853021.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:22.220Z,1478853022.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:22.257Z,1478853022.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:22.605Z,1478853022.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:22.651Z,1478853022.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:23.005Z,1478853023.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:23.021Z,1478853023.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:23.414Z,1478853023.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:23.429Z,1478853023.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:23.835Z,1478853023.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:23.873Z,1478853023.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:24.224Z,1478853024.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:24.239Z,1478853024.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:24.623Z,1478853024.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:24.666Z,1478853024.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:25.013Z,1478853025.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:25.028Z,1478853025.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:25.417Z,1478853025.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:25.432Z,1478853025.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:25.841Z,1478853025.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:25.877Z,1478853025.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:26.213Z,1478853026.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:26.233Z,1478853026.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:26.613Z,1478853026.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:26.635Z,1478853026.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:27.005Z,1478853027.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:27.041Z,1478853027.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:27.405Z,1478853027.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:27.437Z,1478853027.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:27.825Z,1478853027.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:27.879Z,1478853027.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:28.206Z,1478853028.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:28.252Z,1478853028.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:28.632Z,1478853028.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:28.660Z,1478853028.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:29.020Z,1478853029.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:29.067Z,1478853029.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:29.420Z,1478853029.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:29.469Z,1478853029.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:29.840Z,1478853029.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:29.904Z,1478853029.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:30.214Z,1478853030.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:30.230Z,1478853030.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:30.609Z,1478853030.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:30.637Z,1478853030.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:31.006Z,1478853031.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:31.038Z,1478853031.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:31.405Z,1478853031.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:31.441Z,1478853031.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:31.805Z,1478853031.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:31.855Z,1478853031.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:32.208Z,1478853032.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:32.260Z,1478853032.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:32.609Z,1478853032.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:32.618Z,1478853032.618 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T08:30:32.618Z,1478853032.618 [BPC1] Data Fault, FailCount= 1
2016-11-11T08:30:32.618Z,1478853032.618 [BPC1](ERROR): Data Fault
2016-11-11T08:30:32.627Z,1478853032.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:32.716Z,1478853032.716 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T08:30:33.012Z,1478853033.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:33.028Z,1478853033.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:33.408Z,1478853033.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:33.441Z,1478853033.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:33.827Z,1478853033.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:33.843Z,1478853033.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:33.867Z,1478853033.867 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T08:30:33.867Z,1478853033.867 [Rowe_600LCM] Communications Fault, FailCount= 2
2016-11-11T08:30:33.867Z,1478853033.867 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T08:30:33.901Z,1478853033.901 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T08:30:33.901Z,1478853033.901 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:30:33.901Z,1478853033.901 [BPC1] No Fault, FailCount= 1
2016-11-11T08:30:34.228Z,1478853034.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:34.271Z,1478853034.271 [Rowe_600LCM](INFO): Powering down
2016-11-11T08:30:34.354Z,1478853034.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2016-11-11T08:30:34.356Z,1478853034.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:34.631Z,1478853034.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:34.685Z,1478853034.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T08:30:34.686Z,1478853034.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:35.023Z,1478853035.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:35.037Z,1478853035.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:30:35.038Z,1478853035.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:35.405Z,1478853035.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:35.437Z,1478853035.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:30:35.438Z,1478853035.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:35.808Z,1478853035.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:35.836Z,1478853035.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:30:35.837Z,1478853035.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:35.860Z,1478853035.860 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T08:30:35.860Z,1478853035.861 [Rowe_600LCM] No Fault, FailCount= 2
2016-11-11T08:30:35.887Z,1478853035.887 [Rowe_600LCM](INFO): Initializing
2016-11-11T08:30:35.888Z,1478853035.888 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T08:30:35.888Z,1478853035.888 [Rowe_600LCM](INFO): LCM OK
2016-11-11T08:30:35.888Z,1478853035.888 [Rowe_600LCM](INFO): Powering up
2016-11-11T08:30:36.205Z,1478853036.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:36.240Z,1478853036.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:30:36.241Z,1478853036.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:36.605Z,1478853036.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:36.641Z,1478853036.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:30:36.642Z,1478853036.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:37.005Z,1478853037.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:37.040Z,1478853037.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T08:30:37.042Z,1478853037.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:37.405Z,1478853037.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:37.440Z,1478853037.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T08:30:37.441Z,1478853037.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:37.805Z,1478853037.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:37.845Z,1478853037.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T08:30:37.847Z,1478853037.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:38.209Z,1478853038.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:38.228Z,1478853038.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T08:30:38.230Z,1478853038.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:38.612Z,1478853038.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:38.627Z,1478853038.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T08:30:38.628Z,1478853038.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:39.020Z,1478853039.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:39.040Z,1478853039.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T08:30:39.041Z,1478853039.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:39.418Z,1478853039.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:39.449Z,1478853039.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T08:30:39.450Z,1478853039.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:39.825Z,1478853039.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:39.846Z,1478853039.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T08:30:39.848Z,1478853039.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:40.015Z,1478853040.016 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T08:30:40.078Z,1478853040.078 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T08:30:40.080Z,1478853040.080 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T08:30:40.081Z,1478853040.081 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T08:30:40.082Z,1478853040.082 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T08:30:40.227Z,1478853040.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:40.253Z,1478853040.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T08:30:40.255Z,1478853040.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:40.605Z,1478853040.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:40.652Z,1478853040.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:41.006Z,1478853041.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:41.022Z,1478853041.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:41.413Z,1478853041.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:41.428Z,1478853041.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:41.829Z,1478853041.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:41.926Z,1478853041.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:42.211Z,1478853042.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:42.233Z,1478853042.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:42.613Z,1478853042.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:42.636Z,1478853042.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:43.008Z,1478853043.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:43.040Z,1478853043.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:43.412Z,1478853043.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:43.427Z,1478853043.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:43.806Z,1478853043.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:43.834Z,1478853043.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:44.229Z,1478853044.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:44.252Z,1478853044.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:44.631Z,1478853044.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:44.649Z,1478853044.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:45.020Z,1478853045.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:45.061Z,1478853045.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:45.416Z,1478853045.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:45.472Z,1478853045.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:45.817Z,1478853045.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:45.873Z,1478853045.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:46.213Z,1478853046.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:46.233Z,1478853046.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:46.610Z,1478853046.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:46.629Z,1478853046.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:47.036Z,1478853047.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:47.183Z,1478853047.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:47.417Z,1478853047.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:47.451Z,1478853047.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:47.805Z,1478853047.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:47.862Z,1478853047.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:48.205Z,1478853048.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:48.239Z,1478853048.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:48.606Z,1478853048.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:48.675Z,1478853048.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:49.005Z,1478853049.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:49.081Z,1478853049.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:49.424Z,1478853049.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:49.458Z,1478853049.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:52.891Z,1478853052.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:52.909Z,1478853052.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:53.032Z,1478853053.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:53.058Z,1478853053.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:53.450Z,1478853053.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:53.466Z,1478853053.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:53.824Z,1478853053.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:53.868Z,1478853053.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:54.208Z,1478853054.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:54.224Z,1478853054.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:54.612Z,1478853054.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:54.627Z,1478853054.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:55.009Z,1478853055.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:55.026Z,1478853055.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:55.404Z,1478853055.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:55.436Z,1478853055.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:55.820Z,1478853055.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:55.853Z,1478853055.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:56.206Z,1478853056.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:56.234Z,1478853056.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:56.601Z,1478853056.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:56.633Z,1478853056.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:57.001Z,1478853057.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:57.033Z,1478853057.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:57.401Z,1478853057.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:57.441Z,1478853057.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:57.836Z,1478853057.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:57.854Z,1478853057.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:58.217Z,1478853058.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:58.243Z,1478853058.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:58.616Z,1478853058.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:58.659Z,1478853058.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:59.013Z,1478853059.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:59.041Z,1478853059.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:59.409Z,1478853059.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:59.452Z,1478853059.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:30:59.841Z,1478853059.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:30:59.882Z,1478853059.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:00.205Z,1478853060.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:00.228Z,1478853060.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:00.605Z,1478853060.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:00.626Z,1478853060.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:01.009Z,1478853061.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:01.075Z,1478853061.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:01.401Z,1478853061.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:01.433Z,1478853061.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:01.801Z,1478853061.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:01.878Z,1478853061.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:02.201Z,1478853062.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:02.235Z,1478853062.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:02.601Z,1478853062.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:02.654Z,1478853062.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:03.020Z,1478853063.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:03.077Z,1478853063.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:03.416Z,1478853063.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:03.461Z,1478853063.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:03.816Z,1478853063.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:03.849Z,1478853063.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:04.228Z,1478853064.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:04.253Z,1478853064.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:04.610Z,1478853064.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:04.625Z,1478853064.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:05.010Z,1478853065.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:05.034Z,1478853065.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:05.412Z,1478853065.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:05.427Z,1478853065.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:05.801Z,1478853065.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:05.816Z,1478853065.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:06.206Z,1478853066.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:06.237Z,1478853066.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:06.604Z,1478853066.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:06.637Z,1478853066.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:07.010Z,1478853067.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:07.025Z,1478853067.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:07.401Z,1478853067.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:07.428Z,1478853067.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:07.801Z,1478853067.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:07.827Z,1478853067.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:08.225Z,1478853068.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:08.263Z,1478853068.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:08.616Z,1478853068.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:08.650Z,1478853068.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:09.021Z,1478853069.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:09.042Z,1478853069.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:09.425Z,1478853069.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:09.441Z,1478853069.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:09.802Z,1478853069.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:09.842Z,1478853069.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:10.203Z,1478853070.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:10.226Z,1478853070.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:10.601Z,1478853070.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:10.647Z,1478853070.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:11.005Z,1478853071.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:11.041Z,1478853071.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:11.401Z,1478853071.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:11.417Z,1478853071.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:11.807Z,1478853071.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:11.854Z,1478853071.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:12.206Z,1478853072.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:12.226Z,1478853072.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:12.609Z,1478853072.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:12.630Z,1478853072.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:13.005Z,1478853073.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:13.025Z,1478853073.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:13.416Z,1478853073.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:13.433Z,1478853073.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:13.819Z,1478853073.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:13.860Z,1478853073.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:14.228Z,1478853074.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:14.257Z,1478853074.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:14.616Z,1478853074.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:14.642Z,1478853074.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:15.001Z,1478853075.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:15.081Z,1478853075.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:15.401Z,1478853075.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:15.421Z,1478853075.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:15.809Z,1478853075.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:15.861Z,1478853075.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:16.220Z,1478853076.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:16.235Z,1478853076.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:16.610Z,1478853076.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:16.664Z,1478853076.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:17.009Z,1478853077.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:17.064Z,1478853077.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:17.408Z,1478853077.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:17.423Z,1478853077.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:17.809Z,1478853077.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:17.825Z,1478853077.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:18.217Z,1478853078.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:18.232Z,1478853078.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:18.630Z,1478853078.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:18.677Z,1478853078.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:19.023Z,1478853079.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:19.038Z,1478853079.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:19.420Z,1478853079.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:19.448Z,1478853079.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:19.820Z,1478853079.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:19.841Z,1478853079.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:20.202Z,1478853080.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:20.222Z,1478853080.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:20.601Z,1478853080.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:20.637Z,1478853080.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:21.007Z,1478853081.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:21.022Z,1478853081.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:21.406Z,1478853081.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:21.425Z,1478853081.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:21.809Z,1478853081.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:21.897Z,1478853081.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:22.201Z,1478853082.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:22.237Z,1478853082.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:22.601Z,1478853082.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:22.638Z,1478853082.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:23.001Z,1478853083.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:23.037Z,1478853083.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:23.401Z,1478853083.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:23.437Z,1478853083.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:23.815Z,1478853083.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:23.854Z,1478853083.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:24.212Z,1478853084.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:24.249Z,1478853084.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:24.616Z,1478853084.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:24.663Z,1478853084.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:25.020Z,1478853085.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:25.046Z,1478853085.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:25.406Z,1478853085.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:25.430Z,1478853085.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:25.808Z,1478853085.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:25.829Z,1478853085.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:26.206Z,1478853086.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:26.230Z,1478853086.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:26.605Z,1478853086.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:26.629Z,1478853086.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:27.004Z,1478853087.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:27.033Z,1478853087.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:27.405Z,1478853087.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:27.428Z,1478853087.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:27.816Z,1478853087.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:27.841Z,1478853087.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:28.212Z,1478853088.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:28.228Z,1478853088.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:28.601Z,1478853088.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:28.637Z,1478853088.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:29.023Z,1478853089.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:29.073Z,1478853089.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:29.427Z,1478853089.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:29.442Z,1478853089.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:29.828Z,1478853089.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:29.846Z,1478853089.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:30.212Z,1478853090.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:30.285Z,1478853090.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:30.605Z,1478853090.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:30.633Z,1478853090.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:31.002Z,1478853091.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:31.054Z,1478853091.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:31.401Z,1478853091.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:31.451Z,1478853091.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:31.806Z,1478853091.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:31.821Z,1478853091.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:32.202Z,1478853092.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:32.221Z,1478853092.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:32.606Z,1478853092.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:32.625Z,1478853092.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:33.004Z,1478853093.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:33.019Z,1478853093.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:33.412Z,1478853093.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:33.433Z,1478853093.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:33.810Z,1478853093.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:33.829Z,1478853093.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:34.226Z,1478853094.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:34.252Z,1478853094.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:34.627Z,1478853094.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:34.643Z,1478853094.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:35.016Z,1478853095.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:35.037Z,1478853095.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:35.412Z,1478853095.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:35.449Z,1478853095.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:35.802Z,1478853095.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:35.821Z,1478853095.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:36.210Z,1478853096.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:36.225Z,1478853096.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:36.605Z,1478853096.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:36.625Z,1478853096.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:37.009Z,1478853097.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:37.029Z,1478853097.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:37.404Z,1478853097.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:37.437Z,1478853097.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:37.808Z,1478853097.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:37.829Z,1478853097.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:38.201Z,1478853098.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:38.233Z,1478853098.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:38.601Z,1478853098.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:38.637Z,1478853098.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:39.001Z,1478853099.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:39.037Z,1478853099.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:39.424Z,1478853099.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:39.458Z,1478853099.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:39.812Z,1478853099.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:39.865Z,1478853099.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:40.230Z,1478853100.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:40.253Z,1478853100.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:40.620Z,1478853100.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:40.650Z,1478853100.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:41.002Z,1478853101.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:41.021Z,1478853101.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:41.402Z,1478853101.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:41.429Z,1478853101.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:41.810Z,1478853101.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:41.877Z,1478853101.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:42.216Z,1478853102.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:42.232Z,1478853102.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:42.609Z,1478853102.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:42.637Z,1478853102.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:43.002Z,1478853103.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:43.033Z,1478853103.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:43.401Z,1478853103.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:43.461Z,1478853103.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:43.801Z,1478853103.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:43.846Z,1478853103.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:44.210Z,1478853104.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:44.261Z,1478853104.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:44.616Z,1478853104.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:44.655Z,1478853104.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:45.012Z,1478853105.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:45.054Z,1478853105.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:45.416Z,1478853105.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:45.483Z,1478853105.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:45.812Z,1478853105.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:45.839Z,1478853105.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:46.214Z,1478853106.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:46.238Z,1478853106.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:46.606Z,1478853106.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:46.621Z,1478853106.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:47.009Z,1478853107.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:47.029Z,1478853107.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:47.408Z,1478853107.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:47.425Z,1478853107.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:47.808Z,1478853107.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:47.828Z,1478853107.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:48.216Z,1478853108.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:48.252Z,1478853108.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:48.602Z,1478853108.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:48.630Z,1478853108.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:49.002Z,1478853109.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:49.041Z,1478853109.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:49.402Z,1478853109.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:49.433Z,1478853109.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:49.817Z,1478853109.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:49.847Z,1478853109.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:53.368Z,1478853113.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:53.393Z,1478853113.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:53.501Z,1478853113.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:53.533Z,1478853113.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:53.870Z,1478853113.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:53.901Z,1478853113.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:54.264Z,1478853114.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:54.301Z,1478853114.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:54.672Z,1478853114.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:54.704Z,1478853114.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:55.044Z,1478853115.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:55.081Z,1478853115.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:55.442Z,1478853115.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:55.479Z,1478853115.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:55.841Z,1478853115.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:55.917Z,1478853115.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:56.283Z,1478853116.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:56.321Z,1478853116.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:56.641Z,1478853116.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:56.685Z,1478853116.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:57.051Z,1478853117.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:57.066Z,1478853117.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:57.453Z,1478853117.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:57.473Z,1478853117.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:57.851Z,1478853117.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:57.902Z,1478853117.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:58.264Z,1478853118.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:58.294Z,1478853118.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:58.662Z,1478853118.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:58.717Z,1478853118.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:59.062Z,1478853119.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:59.093Z,1478853119.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:59.458Z,1478853119.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:59.506Z,1478853119.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:31:59.846Z,1478853119.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:31:59.862Z,1478853119.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:00.255Z,1478853120.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:00.305Z,1478853120.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:00.647Z,1478853120.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:00.670Z,1478853120.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:01.050Z,1478853121.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:01.073Z,1478853121.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:01.447Z,1478853121.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:01.485Z,1478853121.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:01.841Z,1478853121.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:01.873Z,1478853121.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:02.241Z,1478853122.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:02.271Z,1478853122.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:02.641Z,1478853122.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:02.682Z,1478853122.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:03.041Z,1478853123.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:03.059Z,1478853123.059 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:03.075Z,1478853123.075 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2016-11-11T08:32:03.075Z,1478853123.075 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:32:03.086Z,1478853123.086 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:03.086Z,1478853123.086 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 55
2016-11-11T08:32:03.086Z,1478853123.086 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:32:03.088Z,1478853123.088 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:03.088Z,1478853123.088 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 55
2016-11-11T08:32:03.088Z,1478853123.088 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:32:03.116Z,1478853123.116 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:32:03.116Z,1478853123.116 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:32:03.116Z,1478853123.116 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:32:03.453Z,1478853123.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:03.504Z,1478853123.504 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:32:03.504Z,1478853123.504 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2016-11-11T08:32:03.505Z,1478853123.505 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:32:03.505Z,1478853123.505 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 55
2016-11-11T08:32:03.506Z,1478853123.506 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:32:03.506Z,1478853123.506 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 55
2016-11-11T08:32:03.864Z,1478853123.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:03.897Z,1478853123.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:32:03.897Z,1478853123.898 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:32:03.898Z,1478853123.898 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:32:03.903Z,1478853123.903 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:32:03.903Z,1478853123.903 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:32:03.904Z,1478853123.904 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:32:03.904Z,1478853123.904 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:32:03.905Z,1478853123.905 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:32:03.905Z,1478853123.905 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:32:04.258Z,1478853124.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:04.273Z,1478853124.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:04.654Z,1478853124.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:04.673Z,1478853124.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:05.051Z,1478853125.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:05.066Z,1478853125.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:05.446Z,1478853125.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:05.481Z,1478853125.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:05.858Z,1478853125.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:05.873Z,1478853125.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:06.252Z,1478853126.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:06.267Z,1478853126.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:06.646Z,1478853126.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:06.681Z,1478853126.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:07.041Z,1478853127.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:07.081Z,1478853127.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:07.442Z,1478853127.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:07.518Z,1478853127.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:07.856Z,1478853127.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:07.889Z,1478853127.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:08.241Z,1478853128.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:08.277Z,1478853128.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:08.668Z,1478853128.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:08.684Z,1478853128.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:09.060Z,1478853129.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:09.091Z,1478853129.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:09.467Z,1478853129.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:09.489Z,1478853129.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:09.873Z,1478853129.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:09.888Z,1478853129.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:10.241Z,1478853130.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:10.271Z,1478853130.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:10.641Z,1478853130.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:10.685Z,1478853130.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:10.936Z,1478853130.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:11.055Z,1478853131.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:11.113Z,1478853131.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:11.477Z,1478853131.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:11.513Z,1478853131.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:11.732Z,1478853131.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:11.845Z,1478853131.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:11.869Z,1478853131.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:12.257Z,1478853132.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:12.303Z,1478853132.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:12.641Z,1478853132.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:12.681Z,1478853132.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:13.041Z,1478853133.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:13.129Z,1478853133.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:13.471Z,1478853133.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:13.498Z,1478853133.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:13.854Z,1478853133.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:13.901Z,1478853133.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:14.265Z,1478853134.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:14.280Z,1478853134.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:14.664Z,1478853134.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:14.717Z,1478853134.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:15.052Z,1478853135.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:15.084Z,1478853135.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:15.441Z,1478853135.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:15.477Z,1478853135.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:15.861Z,1478853135.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:15.876Z,1478853135.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:16.241Z,1478853136.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:16.278Z,1478853136.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:16.641Z,1478853136.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:16.677Z,1478853136.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:17.042Z,1478853137.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:17.080Z,1478853137.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:17.441Z,1478853137.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:17.479Z,1478853137.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:17.841Z,1478853137.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:17.881Z,1478853137.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:18.259Z,1478853138.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:18.279Z,1478853138.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:18.641Z,1478853138.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:18.677Z,1478853138.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:19.041Z,1478853139.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:19.077Z,1478853139.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:19.448Z,1478853139.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:19.476Z,1478853139.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:19.841Z,1478853139.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:19.873Z,1478853139.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:20.241Z,1478853140.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:20.278Z,1478853140.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:20.648Z,1478853140.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:20.684Z,1478853140.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:21.041Z,1478853141.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:21.071Z,1478853141.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:21.441Z,1478853141.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:21.481Z,1478853141.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:21.852Z,1478853141.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:21.880Z,1478853141.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:22.241Z,1478853142.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:22.259Z,1478853142.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:22.658Z,1478853142.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:22.689Z,1478853142.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:23.058Z,1478853143.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:23.089Z,1478853143.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:23.451Z,1478853143.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:23.466Z,1478853143.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:23.852Z,1478853143.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:23.882Z,1478853143.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:24.242Z,1478853144.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:24.310Z,1478853144.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:24.652Z,1478853144.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:24.702Z,1478853144.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:25.049Z,1478853145.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:25.064Z,1478853145.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:25.449Z,1478853145.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:25.485Z,1478853145.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:25.841Z,1478853145.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:25.893Z,1478853145.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:26.261Z,1478853146.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:26.325Z,1478853146.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:26.647Z,1478853146.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:26.663Z,1478853146.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:27.058Z,1478853147.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:27.074Z,1478853147.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:27.463Z,1478853147.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:27.521Z,1478853147.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:27.856Z,1478853147.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:27.888Z,1478853147.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:28.241Z,1478853148.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:28.309Z,1478853148.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:28.647Z,1478853148.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:28.698Z,1478853148.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:29.059Z,1478853149.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:29.089Z,1478853149.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:29.457Z,1478853149.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:29.481Z,1478853149.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:29.883Z,1478853149.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:29.917Z,1478853149.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:30.261Z,1478853150.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:30.297Z,1478853150.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:30.646Z,1478853150.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:30.680Z,1478853150.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:31.054Z,1478853151.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:31.080Z,1478853151.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:31.462Z,1478853151.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:31.489Z,1478853151.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:31.865Z,1478853151.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:31.880Z,1478853151.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:32.268Z,1478853152.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:32.296Z,1478853152.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:32.663Z,1478853152.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:32.699Z,1478853152.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:33.041Z,1478853153.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:33.081Z,1478853153.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:33.446Z,1478853153.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:33.469Z,1478853153.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:33.848Z,1478853153.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:33.872Z,1478853153.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:34.255Z,1478853154.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:34.271Z,1478853154.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:34.653Z,1478853154.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:34.670Z,1478853154.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:35.051Z,1478853155.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:35.066Z,1478853155.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:35.446Z,1478853155.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:35.482Z,1478853155.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:35.841Z,1478853155.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:35.874Z,1478853155.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:36.253Z,1478853156.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:36.277Z,1478853156.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:36.427Z,1478853156.427 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T08:32:36.427Z,1478853156.427 [Rowe_600LCM] Communications Fault, FailCount= 3
2016-11-11T08:32:36.427Z,1478853156.427 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T08:32:36.662Z,1478853156.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:36.697Z,1478853156.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T08:32:36.698Z,1478853156.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:36.747Z,1478853156.747 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T08:32:36.831Z,1478853156.831 [Rowe_600LCM](INFO): Powering down
2016-11-11T08:32:37.054Z,1478853157.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:37.079Z,1478853157.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T08:32:37.080Z,1478853157.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:37.462Z,1478853157.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:37.496Z,1478853157.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:32:37.497Z,1478853157.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:37.854Z,1478853157.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:37.881Z,1478853157.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:32:37.882Z,1478853157.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:38.247Z,1478853158.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:38.268Z,1478853158.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:32:38.269Z,1478853158.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:38.317Z,1478853158.317 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T08:32:38.317Z,1478853158.317 [Rowe_600LCM] No Fault, FailCount= 3
2016-11-11T08:32:38.447Z,1478853158.447 [Rowe_600LCM](INFO): Initializing
2016-11-11T08:32:38.448Z,1478853158.448 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T08:32:38.448Z,1478853158.448 [Rowe_600LCM](INFO): LCM OK
2016-11-11T08:32:38.448Z,1478853158.448 [Rowe_600LCM](INFO): Powering up
2016-11-11T08:32:38.651Z,1478853158.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:38.665Z,1478853158.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:32:38.667Z,1478853158.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:39.051Z,1478853159.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:39.066Z,1478853159.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:32:39.067Z,1478853159.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:39.449Z,1478853159.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:39.505Z,1478853159.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T08:32:39.506Z,1478853159.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:39.841Z,1478853159.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:39.877Z,1478853159.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T08:32:39.878Z,1478853159.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:40.241Z,1478853160.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:40.278Z,1478853160.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T08:32:40.279Z,1478853160.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:40.641Z,1478853160.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:40.676Z,1478853160.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T08:32:40.678Z,1478853160.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:41.041Z,1478853161.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:41.129Z,1478853161.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2016-11-11T08:32:41.130Z,1478853161.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:41.471Z,1478853161.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:41.490Z,1478853161.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T08:32:41.512Z,1478853161.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:41.863Z,1478853161.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:41.877Z,1478853161.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T08:32:41.879Z,1478853161.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:42.270Z,1478853162.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:42.322Z,1478853162.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T08:32:42.324Z,1478853162.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:42.579Z,1478853162.579 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T08:32:42.672Z,1478853162.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:42.698Z,1478853162.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T08:32:42.722Z,1478853162.722 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T08:32:42.723Z,1478853162.723 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T08:32:42.724Z,1478853162.724 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T08:32:42.725Z,1478853162.725 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T08:32:42.726Z,1478853162.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:43.070Z,1478853163.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:43.118Z,1478853163.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T08:32:43.119Z,1478853163.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:43.454Z,1478853163.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:43.547Z,1478853163.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:43.841Z,1478853163.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:43.878Z,1478853163.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:44.241Z,1478853164.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:44.287Z,1478853164.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:44.641Z,1478853164.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:44.694Z,1478853164.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:45.042Z,1478853165.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:45.110Z,1478853165.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:45.447Z,1478853165.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:45.475Z,1478853165.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:45.859Z,1478853165.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:45.874Z,1478853165.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:46.257Z,1478853166.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:46.293Z,1478853166.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:46.707Z,1478853166.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:46.734Z,1478853166.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:47.072Z,1478853167.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:47.088Z,1478853167.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:47.472Z,1478853167.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:47.488Z,1478853167.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:47.868Z,1478853167.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:47.883Z,1478853167.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:48.242Z,1478853168.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:48.271Z,1478853168.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:48.663Z,1478853168.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:48.682Z,1478853168.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:49.046Z,1478853169.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:49.074Z,1478853169.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:49.452Z,1478853169.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:49.469Z,1478853169.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:49.852Z,1478853169.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:49.880Z,1478853169.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:56.026Z,1478853176.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:56.113Z,1478853176.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:56.256Z,1478853176.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:56.290Z,1478853176.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:56.656Z,1478853176.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:56.702Z,1478853176.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:57.035Z,1478853177.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:57.057Z,1478853177.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:57.411Z,1478853177.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:57.478Z,1478853177.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:57.817Z,1478853177.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:57.887Z,1478853177.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:58.211Z,1478853178.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:58.306Z,1478853178.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:58.611Z,1478853178.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:58.656Z,1478853178.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:59.034Z,1478853179.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:59.122Z,1478853179.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:59.421Z,1478853179.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:59.463Z,1478853179.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:32:59.811Z,1478853179.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:32:59.842Z,1478853179.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:00.211Z,1478853180.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:00.250Z,1478853180.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:00.641Z,1478853180.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:00.656Z,1478853180.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:01.021Z,1478853181.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:01.046Z,1478853181.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:01.436Z,1478853181.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:01.465Z,1478853181.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:01.858Z,1478853181.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:01.876Z,1478853181.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:02.230Z,1478853182.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:02.246Z,1478853182.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:02.624Z,1478853182.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:02.659Z,1478853182.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:03.038Z,1478853183.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:03.066Z,1478853183.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:03.416Z,1478853183.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:03.455Z,1478853183.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:03.809Z,1478853183.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:03.841Z,1478853183.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:04.214Z,1478853184.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:04.253Z,1478853184.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:04.612Z,1478853184.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:04.673Z,1478853184.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:05.025Z,1478853185.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:05.053Z,1478853185.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:05.437Z,1478853185.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:05.462Z,1478853185.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:05.821Z,1478853185.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:05.841Z,1478853185.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:06.214Z,1478853186.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:06.257Z,1478853186.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:06.611Z,1478853186.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:06.670Z,1478853186.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:07.012Z,1478853187.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:07.062Z,1478853187.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:07.416Z,1478853187.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:07.446Z,1478853187.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:07.811Z,1478853187.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:07.861Z,1478853187.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:08.212Z,1478853188.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:08.276Z,1478853188.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:08.610Z,1478853188.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:08.669Z,1478853188.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:09.011Z,1478853189.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:09.062Z,1478853189.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:09.417Z,1478853189.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:09.450Z,1478853189.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:09.811Z,1478853189.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:09.895Z,1478853189.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:10.226Z,1478853190.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:10.308Z,1478853190.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:10.640Z,1478853190.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:10.746Z,1478853190.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:11.018Z,1478853191.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:11.050Z,1478853191.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:11.411Z,1478853191.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:11.487Z,1478853191.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:11.812Z,1478853191.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:11.856Z,1478853191.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:12.215Z,1478853192.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:12.280Z,1478853192.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:12.620Z,1478853192.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:12.645Z,1478853192.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:13.010Z,1478853193.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:13.080Z,1478853193.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:13.411Z,1478853193.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:13.446Z,1478853193.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:13.810Z,1478853193.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:13.865Z,1478853193.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:14.211Z,1478853194.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:14.246Z,1478853194.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:14.622Z,1478853194.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:14.663Z,1478853194.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:15.051Z,1478853195.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:15.105Z,1478853195.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:15.411Z,1478853195.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:15.453Z,1478853195.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:15.810Z,1478853195.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:15.830Z,1478853195.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:16.216Z,1478853196.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:16.232Z,1478853196.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:16.621Z,1478853196.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:16.641Z,1478853196.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:17.013Z,1478853197.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:17.036Z,1478853197.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:17.409Z,1478853197.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:17.444Z,1478853197.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:17.809Z,1478853197.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:17.836Z,1478853197.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:18.209Z,1478853198.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:18.243Z,1478853198.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:18.640Z,1478853198.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:18.655Z,1478853198.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:19.028Z,1478853199.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:19.049Z,1478853199.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:19.409Z,1478853199.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:19.447Z,1478853199.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:19.810Z,1478853199.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:19.841Z,1478853199.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:20.210Z,1478853200.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:20.247Z,1478853200.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:20.609Z,1478853200.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:20.654Z,1478853200.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:21.009Z,1478853201.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:21.049Z,1478853201.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:21.413Z,1478853201.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:21.445Z,1478853201.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:21.809Z,1478853201.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:21.829Z,1478853201.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:22.209Z,1478853202.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:22.229Z,1478853202.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:22.620Z,1478853202.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:22.659Z,1478853202.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:23.017Z,1478853203.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:23.053Z,1478853203.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:23.413Z,1478853203.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:23.433Z,1478853203.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:23.818Z,1478853203.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:23.847Z,1478853203.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:24.224Z,1478853204.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:24.289Z,1478853204.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:24.624Z,1478853204.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:24.661Z,1478853204.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:25.017Z,1478853205.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:25.039Z,1478853205.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:25.420Z,1478853205.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:25.441Z,1478853205.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:25.809Z,1478853205.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:25.844Z,1478853205.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:25.852Z,1478853205.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:26.213Z,1478853206.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:26.239Z,1478853206.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:26.613Z,1478853206.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:26.638Z,1478853206.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:26.648Z,1478853206.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:27.009Z,1478853207.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:27.050Z,1478853207.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:27.316Z,1478853207.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:27.430Z,1478853207.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:27.457Z,1478853207.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:27.831Z,1478853207.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:27.853Z,1478853207.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:28.112Z,1478853208.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:28.210Z,1478853208.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:28.218Z,1478853208.218 [BPC1](ERROR): Failed to receive battery data
2016-11-11T08:33:28.218Z,1478853208.218 [BPC1] Communications Fault, FailCount= 1
2016-11-11T08:33:28.218Z,1478853208.218 [BPC1](ERROR): Communications Fault
2016-11-11T08:33:28.226Z,1478853208.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:28.284Z,1478853208.284 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T08:33:28.613Z,1478853208.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:28.633Z,1478853208.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:29.021Z,1478853209.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:29.056Z,1478853209.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:29.412Z,1478853209.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:29.436Z,1478853209.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:29.474Z,1478853209.474 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:33:29.474Z,1478853209.474 [BPC1] No Fault, FailCount= 1
2016-11-11T08:33:29.817Z,1478853209.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:29.910Z,1478853209.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:30.221Z,1478853210.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:30.277Z,1478853210.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:30.617Z,1478853210.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:30.638Z,1478853210.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:31.024Z,1478853211.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:31.039Z,1478853211.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:31.425Z,1478853211.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:31.451Z,1478853211.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:31.832Z,1478853211.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:31.851Z,1478853211.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:32.229Z,1478853212.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:32.249Z,1478853212.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:32.609Z,1478853212.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:32.637Z,1478853212.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:33.013Z,1478853213.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:33.055Z,1478853213.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:33.426Z,1478853213.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:33.457Z,1478853213.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:33.813Z,1478853213.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:33.852Z,1478853213.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:34.209Z,1478853214.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:34.249Z,1478853214.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:34.617Z,1478853214.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:34.657Z,1478853214.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:35.013Z,1478853215.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:35.051Z,1478853215.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:35.409Z,1478853215.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:35.431Z,1478853215.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:35.813Z,1478853215.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:35.833Z,1478853215.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:36.224Z,1478853216.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:36.241Z,1478853216.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:36.624Z,1478853216.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:36.649Z,1478853216.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:37.014Z,1478853217.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:37.036Z,1478853217.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:37.413Z,1478853217.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:37.447Z,1478853217.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:37.813Z,1478853217.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:37.838Z,1478853217.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:38.209Z,1478853218.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:38.233Z,1478853218.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:38.614Z,1478853218.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:38.632Z,1478853218.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:39.010Z,1478853219.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:39.034Z,1478853219.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:39.320Z,1478853219.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:39.414Z,1478853219.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:39.430Z,1478853219.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:39.810Z,1478853219.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:39.830Z,1478853219.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:40.118Z,1478853220.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:40.217Z,1478853220.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:40.233Z,1478853220.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:40.610Z,1478853220.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:40.657Z,1478853220.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:40.912Z,1478853220.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:41.014Z,1478853221.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:41.031Z,1478853221.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:41.409Z,1478853221.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:41.430Z,1478853221.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:41.708Z,1478853221.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:41.816Z,1478853221.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:41.865Z,1478853221.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:42.224Z,1478853222.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:42.257Z,1478853222.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:42.504Z,1478853222.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:42.613Z,1478853222.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:42.654Z,1478853222.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:43.013Z,1478853223.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:43.082Z,1478853223.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:43.300Z,1478853223.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:43.415Z,1478853223.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:43.430Z,1478853223.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:43.813Z,1478853223.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:43.848Z,1478853223.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:44.225Z,1478853224.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:44.244Z,1478853224.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:44.626Z,1478853224.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:44.641Z,1478853224.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:45.020Z,1478853225.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:45.036Z,1478853225.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:45.413Z,1478853225.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:45.446Z,1478853225.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:45.845Z,1478853225.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:45.861Z,1478853225.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:46.215Z,1478853226.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:46.231Z,1478853226.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:46.616Z,1478853226.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:46.631Z,1478853226.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:47.013Z,1478853227.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:47.045Z,1478853227.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:47.413Z,1478853227.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:47.432Z,1478853227.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:47.811Z,1478853227.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:47.832Z,1478853227.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:48.211Z,1478853228.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:48.227Z,1478853228.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:48.629Z,1478853228.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:48.666Z,1478853228.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:49.026Z,1478853229.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:49.041Z,1478853229.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:49.411Z,1478853229.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:49.428Z,1478853229.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:49.828Z,1478853229.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:49.843Z,1478853229.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:50.221Z,1478853230.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:50.257Z,1478853230.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:53.680Z,1478853233.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:53.687Z,1478853233.687 [PNI_TCM](ERROR): CRC does not match. Expected:0x555 got:0x55836
2016-11-11T08:33:53.687Z,1478853233.687 [PNI_TCM](ERROR): CRC does not match. Expected:0x22831 got:0x19228
2016-11-11T08:33:53.688Z,1478853233.688 [PNI_TCM](ERROR): CRC does not match. Expected:0x19977 got:0x42012
2016-11-11T08:33:53.690Z,1478853233.690 [PNI_TCM](ERROR): CRC does not match. Expected:0x39936 got:0x52252
2016-11-11T08:33:53.690Z,1478853233.690 [PNI_TCM](ERROR): CRC does not match. Expected:0x7413 got:0x18204
2016-11-11T08:33:53.691Z,1478853233.691 [PNI_TCM](ERROR): CRC does not match. Expected:0x46796 got:0x28700
2016-11-11T08:33:53.691Z,1478853233.691 [PNI_TCM](ERROR): CRC does not match. Expected:0x28538 got:0x21276
2016-11-11T08:33:53.691Z,1478853233.691 [PNI_TCM](ERROR): CRC does not match. Expected:0x34572 got:0x59676
2016-11-11T08:33:53.719Z,1478853233.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:53.805Z,1478853233.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:53.841Z,1478853233.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:54.188Z,1478853234.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:54.241Z,1478853234.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:54.589Z,1478853234.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:54.607Z,1478853234.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:54.974Z,1478853234.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:55.005Z,1478853235.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:55.373Z,1478853235.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:55.393Z,1478853235.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:55.774Z,1478853235.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:55.814Z,1478853235.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:56.174Z,1478853236.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:56.193Z,1478853236.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:56.573Z,1478853236.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:56.624Z,1478853236.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:56.974Z,1478853236.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:57.016Z,1478853237.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:57.374Z,1478853237.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:57.389Z,1478853237.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:57.774Z,1478853237.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:57.793Z,1478853237.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:58.170Z,1478853238.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:58.189Z,1478853238.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:58.588Z,1478853238.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:58.606Z,1478853238.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:58.981Z,1478853238.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:59.041Z,1478853239.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:59.372Z,1478853239.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:59.401Z,1478853239.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:33:59.771Z,1478853239.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:33:59.803Z,1478853239.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:00.182Z,1478853240.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:00.212Z,1478853240.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:00.570Z,1478853240.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:00.604Z,1478853240.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:00.970Z,1478853240.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:00.999Z,1478853240.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:01.370Z,1478853241.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:01.397Z,1478853241.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:01.770Z,1478853241.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:01.799Z,1478853241.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:02.170Z,1478853242.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:02.203Z,1478853242.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:02.570Z,1478853242.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:02.597Z,1478853242.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:02.982Z,1478853242.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:03.002Z,1478853243.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:03.370Z,1478853243.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:03.399Z,1478853243.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:03.770Z,1478853243.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:03.799Z,1478853243.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:04.192Z,1478853244.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:04.236Z,1478853244.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:04.570Z,1478853244.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:04.607Z,1478853244.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:04.976Z,1478853244.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:05.004Z,1478853245.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:05.372Z,1478853245.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:05.409Z,1478853245.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:05.771Z,1478853245.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:05.808Z,1478853245.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:06.169Z,1478853246.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:06.216Z,1478853246.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:06.574Z,1478853246.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:06.617Z,1478853246.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:06.993Z,1478853246.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:07.029Z,1478853247.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:07.400Z,1478853247.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:07.415Z,1478853247.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:07.790Z,1478853247.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:07.852Z,1478853247.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:08.172Z,1478853248.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:08.217Z,1478853248.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:08.569Z,1478853248.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:08.605Z,1478853248.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:08.971Z,1478853248.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:09.030Z,1478853249.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:09.370Z,1478853249.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:09.410Z,1478853249.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:09.773Z,1478853249.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:09.837Z,1478853249.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:10.188Z,1478853250.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:10.245Z,1478853250.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:10.571Z,1478853250.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:10.599Z,1478853250.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:10.990Z,1478853250.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:11.045Z,1478853251.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:11.377Z,1478853251.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:11.437Z,1478853251.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:11.770Z,1478853251.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:11.809Z,1478853251.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:12.171Z,1478853252.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:12.208Z,1478853252.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:12.569Z,1478853252.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:12.617Z,1478853252.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:12.986Z,1478853252.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:13.001Z,1478853253.001 [PNI_TCM](ERROR): CRC does not match. Expected:0x52210 got:0x30475
2016-11-11T08:34:13.039Z,1478853253.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:13.375Z,1478853253.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:13.413Z,1478853253.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:13.772Z,1478853253.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:13.809Z,1478853253.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:14.170Z,1478853254.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:14.204Z,1478853254.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:14.570Z,1478853254.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:14.607Z,1478853254.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:14.983Z,1478853254.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:15.014Z,1478853255.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:15.373Z,1478853255.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:15.390Z,1478853255.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:15.788Z,1478853255.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:15.829Z,1478853255.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:16.189Z,1478853256.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:16.221Z,1478853256.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:16.575Z,1478853256.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:16.594Z,1478853256.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:16.981Z,1478853256.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:17.009Z,1478853257.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:17.377Z,1478853257.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:17.422Z,1478853257.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:17.782Z,1478853257.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:17.789Z,1478853257.789 [PNI_TCM](ERROR): CRC does not match. Expected:0x21987 got:0x52288
2016-11-11T08:34:17.827Z,1478853257.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:18.185Z,1478853258.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:18.201Z,1478853258.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:18.582Z,1478853258.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:18.597Z,1478853258.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:18.987Z,1478853258.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:19.012Z,1478853259.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:19.373Z,1478853259.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:19.410Z,1478853259.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:19.782Z,1478853259.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:19.805Z,1478853259.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:20.171Z,1478853260.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:20.208Z,1478853260.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:20.569Z,1478853260.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:20.609Z,1478853260.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:21.008Z,1478853261.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:21.046Z,1478853261.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:21.392Z,1478853261.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:21.440Z,1478853261.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:21.770Z,1478853261.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:21.801Z,1478853261.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:22.170Z,1478853262.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:22.222Z,1478853262.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:22.572Z,1478853262.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:22.609Z,1478853262.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:22.979Z,1478853262.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:23.017Z,1478853263.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:23.370Z,1478853263.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:23.387Z,1478853263.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:23.774Z,1478853263.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:23.829Z,1478853263.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:24.194Z,1478853264.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:24.225Z,1478853264.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:24.596Z,1478853264.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:24.642Z,1478853264.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:25.023Z,1478853265.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:25.051Z,1478853265.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:25.382Z,1478853265.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:25.433Z,1478853265.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:25.779Z,1478853265.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:25.808Z,1478853265.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:26.171Z,1478853266.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:26.245Z,1478853266.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:26.569Z,1478853266.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:26.649Z,1478853266.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:26.988Z,1478853266.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:27.010Z,1478853267.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:27.372Z,1478853267.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:27.409Z,1478853267.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:27.777Z,1478853267.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:27.805Z,1478853267.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:28.177Z,1478853268.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:28.194Z,1478853268.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:28.579Z,1478853268.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:28.605Z,1478853268.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:28.986Z,1478853268.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:29.006Z,1478853269.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:29.378Z,1478853269.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:29.395Z,1478853269.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:29.772Z,1478853269.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:29.809Z,1478853269.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:30.182Z,1478853270.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:30.201Z,1478853270.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:30.582Z,1478853270.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:30.601Z,1478853270.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:30.972Z,1478853270.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:31.002Z,1478853271.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:31.373Z,1478853271.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:31.408Z,1478853271.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:31.772Z,1478853271.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:31.800Z,1478853271.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:32.171Z,1478853272.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:32.208Z,1478853272.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:32.569Z,1478853272.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:32.601Z,1478853272.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:32.990Z,1478853272.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:33.014Z,1478853273.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:33.384Z,1478853273.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:33.416Z,1478853273.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:33.771Z,1478853273.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:33.809Z,1478853273.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:34.178Z,1478853274.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:34.207Z,1478853274.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:34.575Z,1478853274.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:34.601Z,1478853274.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:34.976Z,1478853274.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:35.017Z,1478853275.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:35.373Z,1478853275.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:35.397Z,1478853275.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:35.772Z,1478853275.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:35.800Z,1478853275.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:36.176Z,1478853276.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:36.197Z,1478853276.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:36.579Z,1478853276.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:36.604Z,1478853276.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:36.971Z,1478853276.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:37.045Z,1478853277.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:37.369Z,1478853277.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:37.401Z,1478853277.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:37.774Z,1478853277.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:37.851Z,1478853277.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:38.178Z,1478853278.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:38.265Z,1478853278.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:38.573Z,1478853278.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:38.612Z,1478853278.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:38.806Z,1478853278.806 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T08:34:38.806Z,1478853278.806 [Rowe_600LCM] Communications Fault, FailCount= 4
2016-11-11T08:34:38.806Z,1478853278.806 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T08:34:38.989Z,1478853278.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:39.024Z,1478853279.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T08:34:39.025Z,1478853279.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:39.074Z,1478853279.074 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T08:34:39.211Z,1478853279.211 [Rowe_600LCM](INFO): Powering down
2016-11-11T08:34:39.374Z,1478853279.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:39.429Z,1478853279.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T08:34:39.430Z,1478853279.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:39.774Z,1478853279.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:39.813Z,1478853279.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:34:39.814Z,1478853279.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:40.019Z,1478853280.019 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2016-11-11T08:34:40.020Z,1478853280.020 [Rowe_600LCM] Hardware Fault, FailCount= 4
2016-11-11T08:34:40.020Z,1478853280.020 [Rowe_600LCM](ERROR): Hardware Fault
2016-11-11T08:34:40.177Z,1478853280.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:40.232Z,1478853280.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:34:40.234Z,1478853280.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:40.572Z,1478853280.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:40.628Z,1478853280.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:34:40.630Z,1478853280.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:40.650Z,1478853280.650 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T08:34:40.650Z,1478853280.650 [Rowe_600LCM] No Fault, FailCount= 4
2016-11-11T08:34:40.827Z,1478853280.827 [Rowe_600LCM](INFO): Initializing
2016-11-11T08:34:40.828Z,1478853280.828 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T08:34:40.828Z,1478853280.828 [Rowe_600LCM](INFO): LCM OK
2016-11-11T08:34:40.828Z,1478853280.828 [Rowe_600LCM](INFO): Powering up
2016-11-11T08:34:40.976Z,1478853280.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:41.001Z,1478853281.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:34:41.002Z,1478853281.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:41.418Z,1478853281.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:41.444Z,1478853281.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:34:41.446Z,1478853281.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:41.788Z,1478853281.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:41.802Z,1478853281.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T08:34:41.804Z,1478853281.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:42.176Z,1478853282.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:42.210Z,1478853282.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T08:34:42.211Z,1478853282.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:42.570Z,1478853282.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:42.613Z,1478853282.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T08:34:42.614Z,1478853282.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:42.970Z,1478853282.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:43.052Z,1478853283.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T08:34:43.053Z,1478853283.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:43.374Z,1478853283.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:43.421Z,1478853283.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T08:34:43.422Z,1478853283.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:43.770Z,1478853283.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:43.787Z,1478853283.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T08:34:43.788Z,1478853283.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:44.169Z,1478853284.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:44.190Z,1478853284.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T08:34:44.192Z,1478853284.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:44.575Z,1478853284.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:44.591Z,1478853284.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T08:34:44.592Z,1478853284.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:44.985Z,1478853284.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:45.032Z,1478853285.032 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T08:34:45.061Z,1478853285.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T08:34:45.062Z,1478853285.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:45.158Z,1478853285.158 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T08:34:45.160Z,1478853285.160 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T08:34:45.161Z,1478853285.161 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T08:34:45.162Z,1478853285.162 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T08:34:45.381Z,1478853285.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:45.410Z,1478853285.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T08:34:45.412Z,1478853285.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:45.794Z,1478853285.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:45.810Z,1478853285.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:46.195Z,1478853286.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:46.211Z,1478853286.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:46.570Z,1478853286.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:46.608Z,1478853286.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:46.969Z,1478853286.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:47.004Z,1478853287.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:47.374Z,1478853287.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:47.408Z,1478853287.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:47.770Z,1478853287.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:47.788Z,1478853287.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:48.172Z,1478853288.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:48.198Z,1478853288.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:48.572Z,1478853288.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:48.606Z,1478853288.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:48.990Z,1478853288.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:49.006Z,1478853289.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:49.036Z,1478853289.036 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T08:29:48.7Z
2016-11-11T08:34:49.036Z,1478853289.036 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T08:34:49.036Z,1478853289.036 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T08:34:49.407Z,1478853289.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:49.445Z,1478853289.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:50.233Z,1478853290.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:50.257Z,1478853290.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:50.362Z,1478853290.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:50.400Z,1478853290.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:53.748Z,1478853293.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:53.833Z,1478853293.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:53.884Z,1478853293.884 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0088.lzma
2016-11-11T08:34:53.923Z,1478853293.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:53.965Z,1478853293.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:54.332Z,1478853294.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:54.385Z,1478853294.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:54.685Z,1478853294.685 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0088.lzma.bak
2016-11-11T08:34:54.685Z,1478853294.685 [DataOverHttps](INFO): SBD MOMSN=4555228
2016-11-11T08:34:54.733Z,1478853294.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:54.789Z,1478853294.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:56.353Z,1478853296.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:56.384Z,1478853296.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:34:56.489Z,1478853296.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:34:56.549Z,1478853296.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:00.032Z,1478853300.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:00.070Z,1478853300.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:00.186Z,1478853300.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:00.201Z,1478853300.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:00.551Z,1478853300.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:00.566Z,1478853300.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:00.953Z,1478853300.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:00.973Z,1478853300.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:01.353Z,1478853301.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:01.373Z,1478853301.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:01.768Z,1478853301.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:01.832Z,1478853301.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:05.083Z,1478853305.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:05.113Z,1478853305.113 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:05.113Z,1478853305.113 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2016-11-11T08:35:05.113Z,1478853305.113 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:35:05.120Z,1478853305.120 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:05.120Z,1478853305.120 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 56
2016-11-11T08:35:05.120Z,1478853305.121 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:35:05.123Z,1478853305.122 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:05.123Z,1478853305.123 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 56
2016-11-11T08:35:05.123Z,1478853305.123 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:35:05.137Z,1478853305.137 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:35:05.137Z,1478853305.137 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:35:05.137Z,1478853305.137 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:35:05.183Z,1478853305.183 [DataOverHttps](INFO): Sending 322 bytes from file Logs/20161111T044527/Express0089.lzma
2016-11-11T08:35:05.212Z,1478853305.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:05.295Z,1478853305.295 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:35:05.299Z,1478853305.299 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2016-11-11T08:35:05.300Z,1478853305.300 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:35:05.300Z,1478853305.300 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 56
2016-11-11T08:35:05.301Z,1478853305.301 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:35:05.301Z,1478853305.301 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 56
2016-11-11T08:35:05.593Z,1478853305.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:05.608Z,1478853305.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:35:05.609Z,1478853305.609 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:35:05.609Z,1478853305.609 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:35:05.614Z,1478853305.614 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:35:05.614Z,1478853305.614 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:35:05.614Z,1478853305.614 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:35:05.615Z,1478853305.615 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:35:05.615Z,1478853305.615 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:35:05.616Z,1478853305.616 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:35:05.961Z,1478853305.961 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0089.lzma.bak
2016-11-11T08:35:05.961Z,1478853305.961 [DataOverHttps](INFO): SBD MOMSN=4555230
2016-11-11T08:35:05.996Z,1478853305.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:06.040Z,1478853306.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:07.297Z,1478853307.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:07.313Z,1478853307.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:07.376Z,1478853307.376 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T08:35:07.376Z,1478853307.376 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T08:35:07.376Z,1478853307.376 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T08:35:07.484Z,1478853307.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:07.513Z,1478853307.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:11.001Z,1478853311.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:11.046Z,1478853311.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:11.140Z,1478853311.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:11.169Z,1478853311.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:11.533Z,1478853311.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:11.553Z,1478853311.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:11.938Z,1478853311.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:11.976Z,1478853311.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:12.341Z,1478853312.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:12.390Z,1478853312.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:12.739Z,1478853312.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:12.761Z,1478853312.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:13.142Z,1478853313.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:13.157Z,1478853313.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:13.547Z,1478853313.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:13.601Z,1478853313.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:13.936Z,1478853313.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:13.968Z,1478853313.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:14.342Z,1478853314.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:14.382Z,1478853314.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:14.733Z,1478853314.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:14.798Z,1478853314.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:15.133Z,1478853315.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:15.169Z,1478853315.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:15.533Z,1478853315.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:15.570Z,1478853315.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:15.957Z,1478853315.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:15.972Z,1478853315.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:16.344Z,1478853316.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:16.377Z,1478853316.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:16.733Z,1478853316.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:16.772Z,1478853316.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:17.133Z,1478853317.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:17.169Z,1478853317.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:17.537Z,1478853317.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:17.569Z,1478853317.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:17.933Z,1478853317.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:17.969Z,1478853317.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:18.333Z,1478853318.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:18.365Z,1478853318.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:18.733Z,1478853318.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:18.753Z,1478853318.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:19.133Z,1478853319.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:19.148Z,1478853319.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:19.533Z,1478853319.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:19.553Z,1478853319.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:19.945Z,1478853319.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:19.981Z,1478853319.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:20.358Z,1478853320.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:20.388Z,1478853320.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:20.744Z,1478853320.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:20.759Z,1478853320.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:21.139Z,1478853321.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:21.161Z,1478853321.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:21.541Z,1478853321.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:21.561Z,1478853321.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:21.948Z,1478853321.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:21.963Z,1478853321.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:22.336Z,1478853322.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:22.358Z,1478853322.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:22.742Z,1478853322.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:22.761Z,1478853322.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:23.133Z,1478853323.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:23.159Z,1478853323.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:23.533Z,1478853323.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:23.569Z,1478853323.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:23.925Z,1478853323.925 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T08:35:23.950Z,1478853323.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:23.981Z,1478853323.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:24.333Z,1478853324.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:24.366Z,1478853324.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:24.733Z,1478853324.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:24.759Z,1478853324.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:25.137Z,1478853325.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:25.163Z,1478853325.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:25.533Z,1478853325.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:25.563Z,1478853325.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:25.941Z,1478853325.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:25.957Z,1478853325.957 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T08:35:25.958Z,1478853325.958 [BPC1] Data Fault, FailCount= 1
2016-11-11T08:35:25.958Z,1478853325.958 [BPC1](ERROR): Data Fault
2016-11-11T08:35:25.970Z,1478853325.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:26.010Z,1478853326.010 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T08:35:26.336Z,1478853326.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:26.361Z,1478853326.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:26.741Z,1478853326.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:26.765Z,1478853326.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:27.141Z,1478853327.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:27.156Z,1478853327.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:27.175Z,1478853327.175 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:35:27.175Z,1478853327.175 [BPC1] No Fault, FailCount= 1
2016-11-11T08:35:27.538Z,1478853327.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:27.618Z,1478853327.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:27.933Z,1478853327.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:27.985Z,1478853327.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:28.333Z,1478853328.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:28.361Z,1478853328.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:28.736Z,1478853328.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:28.765Z,1478853328.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:29.133Z,1478853329.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:29.183Z,1478853329.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:29.516Z,1478853329.516 [NAL9602](INFO): Powering down
2016-11-11T08:35:29.536Z,1478853329.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:29.579Z,1478853329.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:29.941Z,1478853329.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:29.966Z,1478853329.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:30.333Z,1478853330.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:30.364Z,1478853330.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:30.733Z,1478853330.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:30.776Z,1478853330.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:31.141Z,1478853331.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:31.173Z,1478853331.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:31.533Z,1478853331.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:31.548Z,1478853331.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:31.933Z,1478853331.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:31.953Z,1478853331.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:32.337Z,1478853332.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:32.380Z,1478853332.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:32.746Z,1478853332.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:32.777Z,1478853332.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:33.140Z,1478853333.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:33.155Z,1478853333.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:33.545Z,1478853333.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:33.598Z,1478853333.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:33.940Z,1478853333.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:33.956Z,1478853333.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:34.340Z,1478853334.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:34.355Z,1478853334.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:34.741Z,1478853334.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:34.773Z,1478853334.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:35.137Z,1478853335.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:35.152Z,1478853335.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:35.538Z,1478853335.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:35.557Z,1478853335.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:35.944Z,1478853335.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:35.960Z,1478853335.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:36.339Z,1478853336.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:36.354Z,1478853336.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:36.744Z,1478853336.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:36.765Z,1478853336.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:37.138Z,1478853337.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:37.176Z,1478853337.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:37.533Z,1478853337.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:37.558Z,1478853337.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:37.945Z,1478853337.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:37.977Z,1478853337.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:38.333Z,1478853338.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:38.366Z,1478853338.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:38.737Z,1478853338.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:38.769Z,1478853338.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:39.133Z,1478853339.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:39.185Z,1478853339.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:39.541Z,1478853339.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:39.573Z,1478853339.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:39.937Z,1478853339.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:39.985Z,1478853339.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:40.333Z,1478853340.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:40.353Z,1478853340.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:40.737Z,1478853340.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:40.757Z,1478853340.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:41.141Z,1478853341.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:41.193Z,1478853341.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:41.550Z,1478853341.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:41.569Z,1478853341.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:41.940Z,1478853341.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:41.991Z,1478853341.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:42.342Z,1478853342.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:42.398Z,1478853342.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:42.743Z,1478853342.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:42.773Z,1478853342.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:43.133Z,1478853343.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:43.169Z,1478853343.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:43.533Z,1478853343.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:43.565Z,1478853343.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:43.933Z,1478853343.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:43.954Z,1478853343.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:44.333Z,1478853344.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:44.354Z,1478853344.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:44.733Z,1478853344.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:44.753Z,1478853344.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:45.138Z,1478853345.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:45.153Z,1478853345.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:45.540Z,1478853345.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:45.555Z,1478853345.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:45.933Z,1478853345.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:45.958Z,1478853345.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:46.341Z,1478853346.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:46.378Z,1478853346.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:46.730Z,1478853346.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:46.757Z,1478853346.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:47.133Z,1478853347.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:47.169Z,1478853347.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:47.533Z,1478853347.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:47.572Z,1478853347.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:47.933Z,1478853347.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:47.969Z,1478853347.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:48.333Z,1478853348.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:48.360Z,1478853348.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:48.733Z,1478853348.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:48.776Z,1478853348.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:49.133Z,1478853349.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:49.173Z,1478853349.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:49.545Z,1478853349.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:49.560Z,1478853349.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:49.941Z,1478853349.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:49.961Z,1478853349.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:50.339Z,1478853350.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:50.354Z,1478853350.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:50.743Z,1478853350.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:50.759Z,1478853350.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:51.136Z,1478853351.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:51.172Z,1478853351.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:51.541Z,1478853351.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:51.561Z,1478853351.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:51.945Z,1478853351.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:51.966Z,1478853351.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:51.998Z,1478853351.998 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T08:35:52.333Z,1478853352.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:52.365Z,1478853352.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:52.733Z,1478853352.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:52.765Z,1478853352.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:53.137Z,1478853353.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:53.197Z,1478853353.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:53.533Z,1478853353.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:53.569Z,1478853353.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:53.935Z,1478853353.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:53.975Z,1478853353.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:54.333Z,1478853354.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:54.381Z,1478853354.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:54.733Z,1478853354.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:54.761Z,1478853354.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:55.140Z,1478853355.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:55.155Z,1478853355.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:55.545Z,1478853355.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:55.605Z,1478853355.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:55.940Z,1478853355.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:55.954Z,1478853355.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:56.340Z,1478853356.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:56.378Z,1478853356.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:56.740Z,1478853356.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:56.802Z,1478853356.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:57.141Z,1478853357.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:57.161Z,1478853357.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:57.533Z,1478853357.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:57.567Z,1478853357.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:57.941Z,1478853357.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:57.966Z,1478853357.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:58.333Z,1478853358.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:58.369Z,1478853358.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:58.733Z,1478853358.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:58.773Z,1478853358.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:59.133Z,1478853359.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:59.169Z,1478853359.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:59.533Z,1478853359.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:59.569Z,1478853359.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:35:59.934Z,1478853359.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:35:59.973Z,1478853359.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:00.339Z,1478853360.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:00.354Z,1478853360.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:00.739Z,1478853360.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:00.761Z,1478853360.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:01.141Z,1478853361.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:01.156Z,1478853361.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:01.547Z,1478853361.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:01.563Z,1478853361.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:01.945Z,1478853361.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:01.965Z,1478853361.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:02.333Z,1478853362.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:02.358Z,1478853362.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:02.733Z,1478853362.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:02.765Z,1478853362.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:03.133Z,1478853363.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:03.167Z,1478853363.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:03.538Z,1478853363.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:03.557Z,1478853363.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:03.937Z,1478853363.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:03.956Z,1478853363.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:04.336Z,1478853364.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:04.359Z,1478853364.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:04.747Z,1478853364.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:04.769Z,1478853364.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:05.144Z,1478853365.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:05.160Z,1478853365.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:05.541Z,1478853365.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:05.581Z,1478853365.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:05.933Z,1478853365.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:05.953Z,1478853365.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:06.333Z,1478853366.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:06.353Z,1478853366.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:06.738Z,1478853366.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:06.753Z,1478853366.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:07.138Z,1478853367.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:07.153Z,1478853367.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:07.545Z,1478853367.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:07.565Z,1478853367.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:07.941Z,1478853367.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:07.956Z,1478853367.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:11.272Z,1478853371.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:11.363Z,1478853371.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:11.474Z,1478853371.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:11.513Z,1478853371.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:11.830Z,1478853371.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:11.849Z,1478853371.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:12.234Z,1478853372.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:12.249Z,1478853372.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:12.633Z,1478853372.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:12.741Z,1478853372.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:13.037Z,1478853373.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:13.077Z,1478853373.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:13.435Z,1478853373.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:13.489Z,1478853373.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:13.835Z,1478853373.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:13.889Z,1478853373.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:14.237Z,1478853374.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:14.258Z,1478853374.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:14.644Z,1478853374.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:14.666Z,1478853374.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:15.030Z,1478853375.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:15.056Z,1478853375.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:15.429Z,1478853375.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:15.466Z,1478853375.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:15.844Z,1478853375.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:15.860Z,1478853375.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:16.229Z,1478853376.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:16.265Z,1478853376.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:16.629Z,1478853376.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:16.661Z,1478853376.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:17.029Z,1478853377.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:17.061Z,1478853377.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:17.429Z,1478853377.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:17.461Z,1478853377.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:17.837Z,1478853377.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:17.862Z,1478853377.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:18.236Z,1478853378.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:18.273Z,1478853378.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:18.629Z,1478853378.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:18.656Z,1478853378.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:19.029Z,1478853379.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:19.049Z,1478853379.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:19.429Z,1478853379.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:19.444Z,1478853379.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:19.837Z,1478853379.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:19.877Z,1478853379.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:20.235Z,1478853380.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:20.257Z,1478853380.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:20.636Z,1478853380.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:20.651Z,1478853380.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:21.036Z,1478853381.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:21.052Z,1478853381.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:21.437Z,1478853381.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:21.457Z,1478853381.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:21.842Z,1478853381.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:21.862Z,1478853381.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:22.229Z,1478853382.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:22.261Z,1478853382.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:22.629Z,1478853382.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:22.661Z,1478853382.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:23.040Z,1478853383.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:23.056Z,1478853383.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:23.429Z,1478853383.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:23.455Z,1478853383.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:23.842Z,1478853383.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:23.873Z,1478853383.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:24.229Z,1478853384.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:24.257Z,1478853384.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:24.629Z,1478853384.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:24.661Z,1478853384.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:25.030Z,1478853385.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:25.061Z,1478853385.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:25.429Z,1478853385.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:25.481Z,1478853385.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:25.845Z,1478853385.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:25.897Z,1478853385.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:26.229Z,1478853386.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:26.265Z,1478853386.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:26.629Z,1478853386.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:26.678Z,1478853386.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:27.029Z,1478853387.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:27.062Z,1478853387.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:27.429Z,1478853387.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:27.478Z,1478853387.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:27.840Z,1478853387.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:27.886Z,1478853387.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:28.229Z,1478853388.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:28.254Z,1478853388.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:28.644Z,1478853388.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:28.659Z,1478853388.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:29.029Z,1478853389.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:29.054Z,1478853389.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:29.429Z,1478853389.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:29.454Z,1478853389.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:29.840Z,1478853389.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:29.878Z,1478853389.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:30.229Z,1478853390.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:30.254Z,1478853390.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:30.633Z,1478853390.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:30.659Z,1478853390.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:31.029Z,1478853391.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:31.069Z,1478853391.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:31.434Z,1478853391.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:31.449Z,1478853391.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:31.841Z,1478853391.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:31.861Z,1478853391.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:32.236Z,1478853392.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:32.251Z,1478853392.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:32.636Z,1478853392.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:32.653Z,1478853392.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:33.041Z,1478853393.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:33.056Z,1478853393.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:33.437Z,1478853393.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:33.457Z,1478853393.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:33.832Z,1478853393.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:33.855Z,1478853393.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:34.232Z,1478853394.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:34.254Z,1478853394.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:34.644Z,1478853394.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:34.673Z,1478853394.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:35.030Z,1478853395.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:35.064Z,1478853395.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:35.444Z,1478853395.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:35.460Z,1478853395.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:35.833Z,1478853395.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:35.868Z,1478853395.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:36.229Z,1478853396.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:36.269Z,1478853396.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:36.637Z,1478853396.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:36.663Z,1478853396.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:37.029Z,1478853397.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:37.065Z,1478853397.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:37.437Z,1478853397.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:37.462Z,1478853397.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:37.829Z,1478853397.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:37.865Z,1478853397.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:38.233Z,1478853398.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:38.265Z,1478853398.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:38.488Z,1478853398.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:38.633Z,1478853398.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:38.665Z,1478853398.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:39.029Z,1478853399.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:39.065Z,1478853399.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:39.284Z,1478853399.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:39.433Z,1478853399.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:39.465Z,1478853399.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:39.841Z,1478853399.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:39.857Z,1478853399.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:40.240Z,1478853400.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:40.317Z,1478853400.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:40.636Z,1478853400.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:40.652Z,1478853400.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:41.029Z,1478853401.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:41.074Z,1478853401.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:41.187Z,1478853401.187 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T08:36:41.187Z,1478853401.187 [Rowe_600LCM] Communications Fault, FailCount= 5
2016-11-11T08:36:41.187Z,1478853401.187 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T08:36:41.440Z,1478853401.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:41.463Z,1478853401.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T08:36:41.464Z,1478853401.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:41.484Z,1478853401.484 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T08:36:41.484Z,1478853401.484 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-11-11T08:36:41.591Z,1478853401.591 [Rowe_600LCM](INFO): Powering down
2016-11-11T08:36:41.829Z,1478853401.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:41.873Z,1478853401.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T08:36:41.874Z,1478853401.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:42.229Z,1478853402.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:42.280Z,1478853402.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:36:42.282Z,1478853402.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:42.629Z,1478853402.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:42.665Z,1478853402.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:36:42.666Z,1478853402.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:43.029Z,1478853403.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:43.048Z,1478853403.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:36:43.050Z,1478853403.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:43.429Z,1478853403.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:43.448Z,1478853403.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:36:43.449Z,1478853403.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:43.833Z,1478853403.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:43.853Z,1478853403.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:36:43.854Z,1478853403.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:44.237Z,1478853404.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:44.256Z,1478853404.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T08:36:44.258Z,1478853404.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:44.633Z,1478853404.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:44.648Z,1478853404.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T08:36:44.649Z,1478853404.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:45.037Z,1478853405.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:45.052Z,1478853405.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T08:36:45.053Z,1478853405.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:45.436Z,1478853405.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:45.450Z,1478853405.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T08:36:45.452Z,1478853405.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:45.836Z,1478853405.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:45.850Z,1478853405.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T08:36:45.851Z,1478853405.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:46.245Z,1478853406.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:46.261Z,1478853406.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T08:36:46.262Z,1478853406.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:46.637Z,1478853406.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:46.653Z,1478853406.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T08:36:46.654Z,1478853406.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:47.029Z,1478853407.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:47.069Z,1478853407.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T08:36:47.071Z,1478853407.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:47.429Z,1478853407.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:47.461Z,1478853407.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T08:36:47.462Z,1478853407.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:47.829Z,1478853407.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:47.843Z,1478853407.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T08:36:47.844Z,1478853407.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:48.234Z,1478853408.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:48.248Z,1478853408.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T08:36:48.250Z,1478853408.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:48.629Z,1478853408.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:48.652Z,1478853408.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T08:36:48.654Z,1478853408.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:49.029Z,1478853409.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:49.057Z,1478853409.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T08:36:49.058Z,1478853409.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:49.439Z,1478853409.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:49.453Z,1478853409.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T08:36:49.454Z,1478853409.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:49.840Z,1478853409.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:49.860Z,1478853409.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T08:36:49.861Z,1478853409.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:50.241Z,1478853410.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:50.260Z,1478853410.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T08:36:50.261Z,1478853410.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:50.629Z,1478853410.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:50.661Z,1478853410.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T08:36:50.662Z,1478853410.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:51.041Z,1478853411.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:51.072Z,1478853411.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T08:36:51.074Z,1478853411.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:51.437Z,1478853411.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:51.472Z,1478853411.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T08:36:51.473Z,1478853411.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:51.837Z,1478853411.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:51.856Z,1478853411.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T08:36:51.858Z,1478853411.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:52.236Z,1478853412.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:52.252Z,1478853412.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T08:36:52.253Z,1478853412.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:52.641Z,1478853412.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:52.665Z,1478853412.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T08:36:52.666Z,1478853412.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:53.029Z,1478853413.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:53.067Z,1478853413.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T08:36:53.068Z,1478853413.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:53.433Z,1478853413.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:53.465Z,1478853413.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T08:36:53.467Z,1478853413.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:53.829Z,1478853413.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:53.866Z,1478853413.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T08:36:53.867Z,1478853413.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:54.229Z,1478853414.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:54.285Z,1478853414.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T08:36:54.286Z,1478853414.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:54.629Z,1478853414.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:54.682Z,1478853414.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T08:36:54.684Z,1478853414.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:55.041Z,1478853415.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:55.070Z,1478853415.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T08:36:55.072Z,1478853415.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:55.429Z,1478853415.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:55.456Z,1478853415.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T08:36:55.458Z,1478853415.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:55.836Z,1478853415.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:55.892Z,1478853415.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T08:36:55.893Z,1478853415.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:56.236Z,1478853416.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:56.256Z,1478853416.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T08:36:56.258Z,1478853416.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:56.636Z,1478853416.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:56.673Z,1478853416.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T08:36:56.674Z,1478853416.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:57.029Z,1478853417.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:57.092Z,1478853417.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T08:36:57.093Z,1478853417.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:57.436Z,1478853417.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:57.474Z,1478853417.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T08:36:57.475Z,1478853417.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:57.829Z,1478853417.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:57.862Z,1478853417.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T08:36:57.863Z,1478853417.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:58.229Z,1478853418.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:58.261Z,1478853418.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T08:36:58.262Z,1478853418.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:58.629Z,1478853418.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:58.662Z,1478853418.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T08:36:58.663Z,1478853418.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:59.029Z,1478853419.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:59.053Z,1478853419.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T08:36:59.054Z,1478853419.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:59.429Z,1478853419.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:59.461Z,1478853419.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T08:36:59.462Z,1478853419.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:36:59.837Z,1478853419.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:36:59.865Z,1478853419.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T08:36:59.866Z,1478853419.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:00.229Z,1478853420.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:00.255Z,1478853420.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T08:37:00.257Z,1478853420.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:00.629Z,1478853420.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:00.665Z,1478853420.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T08:37:00.666Z,1478853420.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:01.029Z,1478853421.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:01.064Z,1478853421.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2016-11-11T08:37:01.065Z,1478853421.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:01.429Z,1478853421.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:01.453Z,1478853421.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:01.829Z,1478853421.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:01.844Z,1478853421.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:02.229Z,1478853422.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:02.249Z,1478853422.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:02.633Z,1478853422.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:02.647Z,1478853422.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:03.037Z,1478853423.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:03.052Z,1478853423.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:03.437Z,1478853423.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:03.451Z,1478853423.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:03.841Z,1478853423.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:03.868Z,1478853423.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:04.229Z,1478853424.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:04.261Z,1478853424.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:04.629Z,1478853424.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:04.665Z,1478853424.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:05.029Z,1478853425.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:05.065Z,1478853425.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:05.429Z,1478853425.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:05.461Z,1478853425.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:05.829Z,1478853425.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:05.865Z,1478853425.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:06.229Z,1478853426.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:06.265Z,1478853426.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:06.629Z,1478853426.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:06.665Z,1478853426.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:07.029Z,1478853427.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:07.064Z,1478853427.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:07.429Z,1478853427.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:07.473Z,1478853427.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:07.829Z,1478853427.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:07.849Z,1478853427.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:08.236Z,1478853428.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:08.244Z,1478853428.244 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T08:37:08.244Z,1478853428.244 [BPC1] Data Fault, FailCount= 1
2016-11-11T08:37:08.244Z,1478853428.244 [BPC1](ERROR): Data Fault
2016-11-11T08:37:08.252Z,1478853428.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:08.304Z,1478853428.304 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T08:37:11.576Z,1478853431.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:11.592Z,1478853431.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:11.690Z,1478853431.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:11.726Z,1478853431.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:12.049Z,1478853432.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:12.064Z,1478853432.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:12.118Z,1478853432.118 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:37:12.118Z,1478853432.118 [BPC1] No Fault, FailCount= 1
2016-11-11T08:37:12.444Z,1478853432.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:12.522Z,1478853432.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:12.844Z,1478853432.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:12.860Z,1478853432.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:13.248Z,1478853433.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:13.299Z,1478853433.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:13.648Z,1478853433.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:13.664Z,1478853433.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:14.047Z,1478853434.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:14.062Z,1478853434.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:14.452Z,1478853434.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:14.467Z,1478853434.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:14.848Z,1478853434.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:14.869Z,1478853434.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:15.249Z,1478853435.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:15.264Z,1478853435.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:15.641Z,1478853435.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:15.675Z,1478853435.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:16.041Z,1478853436.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:16.074Z,1478853436.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:16.441Z,1478853436.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:16.469Z,1478853436.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:16.848Z,1478853436.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:16.863Z,1478853436.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:17.248Z,1478853437.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:17.262Z,1478853437.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:17.648Z,1478853437.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:17.663Z,1478853437.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:18.041Z,1478853438.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:18.074Z,1478853438.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:18.441Z,1478853438.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:18.475Z,1478853438.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:18.841Z,1478853438.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:18.873Z,1478853438.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:19.252Z,1478853439.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:19.273Z,1478853439.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:19.641Z,1478853439.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:19.674Z,1478853439.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:20.041Z,1478853440.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:20.077Z,1478853440.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:20.441Z,1478853440.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:20.473Z,1478853440.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:20.841Z,1478853440.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:20.873Z,1478853440.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:21.241Z,1478853441.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:21.269Z,1478853441.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:21.645Z,1478853441.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:21.677Z,1478853441.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:22.041Z,1478853442.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:22.084Z,1478853442.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:22.441Z,1478853442.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:22.481Z,1478853442.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:22.844Z,1478853442.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:22.861Z,1478853442.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:23.241Z,1478853443.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:23.261Z,1478853443.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:23.646Z,1478853443.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:23.665Z,1478853443.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:24.053Z,1478853444.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:24.073Z,1478853444.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:24.447Z,1478853444.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:24.469Z,1478853444.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:24.848Z,1478853444.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:24.863Z,1478853444.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:25.248Z,1478853445.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:25.329Z,1478853445.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:25.649Z,1478853445.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:25.669Z,1478853445.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:26.041Z,1478853446.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:26.066Z,1478853446.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:26.449Z,1478853446.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:26.506Z,1478853446.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:26.848Z,1478853446.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:26.869Z,1478853446.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:27.248Z,1478853447.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:27.309Z,1478853447.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:27.641Z,1478853447.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:27.675Z,1478853447.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:28.041Z,1478853448.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:28.090Z,1478853448.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:28.441Z,1478853448.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:28.473Z,1478853448.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:28.845Z,1478853448.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:28.877Z,1478853448.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:29.241Z,1478853449.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:29.272Z,1478853449.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:29.645Z,1478853449.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:29.660Z,1478853449.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:30.055Z,1478853450.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:30.082Z,1478853450.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:30.441Z,1478853450.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:30.474Z,1478853450.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:30.841Z,1478853450.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:30.873Z,1478853450.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:31.245Z,1478853451.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:31.270Z,1478853451.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:31.656Z,1478853451.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:31.671Z,1478853451.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:32.041Z,1478853452.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:32.077Z,1478853452.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:32.441Z,1478853452.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:32.477Z,1478853452.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:32.841Z,1478853452.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:32.873Z,1478853452.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:33.241Z,1478853453.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:33.268Z,1478853453.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:33.645Z,1478853453.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:33.677Z,1478853453.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:34.041Z,1478853454.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:34.076Z,1478853454.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:34.441Z,1478853454.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:34.464Z,1478853454.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:34.845Z,1478853454.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:34.859Z,1478853454.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:35.247Z,1478853455.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:35.262Z,1478853455.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:35.647Z,1478853455.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:35.662Z,1478853455.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:36.051Z,1478853456.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:36.067Z,1478853456.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:36.448Z,1478853456.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:36.463Z,1478853456.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:36.848Z,1478853456.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:36.863Z,1478853456.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:37.241Z,1478853457.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:37.276Z,1478853457.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:37.649Z,1478853457.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:37.669Z,1478853457.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:38.049Z,1478853458.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:38.064Z,1478853458.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:38.441Z,1478853458.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:38.476Z,1478853458.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:38.852Z,1478853458.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:38.867Z,1478853458.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:39.241Z,1478853459.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:39.273Z,1478853459.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:39.641Z,1478853459.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:39.673Z,1478853459.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:40.056Z,1478853460.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:40.090Z,1478853460.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:40.441Z,1478853460.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:40.501Z,1478853460.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:40.841Z,1478853460.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:40.873Z,1478853460.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:41.241Z,1478853461.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:41.294Z,1478853461.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:41.642Z,1478853461.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:41.657Z,1478853461.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:42.041Z,1478853462.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:42.093Z,1478853462.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:42.441Z,1478853462.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:42.492Z,1478853462.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:42.841Z,1478853462.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:42.856Z,1478853462.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:43.249Z,1478853463.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:43.264Z,1478853463.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:43.648Z,1478853463.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:43.663Z,1478853463.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:44.048Z,1478853464.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:44.063Z,1478853464.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:44.451Z,1478853464.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:44.466Z,1478853464.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:44.848Z,1478853464.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:44.862Z,1478853464.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:45.249Z,1478853465.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:45.264Z,1478853465.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:45.648Z,1478853465.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:45.671Z,1478853465.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:46.049Z,1478853466.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:46.069Z,1478853466.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:46.448Z,1478853466.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:46.464Z,1478853466.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:46.856Z,1478853466.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:46.871Z,1478853466.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:47.241Z,1478853467.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:47.274Z,1478853467.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:47.641Z,1478853467.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:47.673Z,1478853467.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:48.041Z,1478853468.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:48.069Z,1478853468.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:48.441Z,1478853468.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:48.477Z,1478853468.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:48.841Z,1478853468.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:48.868Z,1478853468.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:49.245Z,1478853469.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:49.281Z,1478853469.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:49.650Z,1478853469.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:49.685Z,1478853469.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:50.049Z,1478853470.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:50.081Z,1478853470.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:50.444Z,1478853470.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:50.465Z,1478853470.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:50.841Z,1478853470.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:50.861Z,1478853470.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:51.250Z,1478853471.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:51.265Z,1478853471.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:51.650Z,1478853471.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:51.673Z,1478853471.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:52.048Z,1478853472.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:52.064Z,1478853472.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:52.450Z,1478853472.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:52.474Z,1478853472.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:52.869Z,1478853472.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:52.950Z,1478853472.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:53.243Z,1478853473.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:53.305Z,1478853473.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:53.643Z,1478853473.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:53.692Z,1478853473.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:54.043Z,1478853474.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:54.094Z,1478853474.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:54.446Z,1478853474.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:54.537Z,1478853474.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:54.850Z,1478853474.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:54.934Z,1478853474.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:55.242Z,1478853475.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:55.281Z,1478853475.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:55.643Z,1478853475.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:55.685Z,1478853475.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:56.046Z,1478853476.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:56.111Z,1478853476.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:56.450Z,1478853476.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:56.508Z,1478853476.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:56.850Z,1478853476.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:56.903Z,1478853476.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:57.251Z,1478853477.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:57.329Z,1478853477.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:57.643Z,1478853477.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:57.658Z,1478853477.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:58.043Z,1478853478.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:58.092Z,1478853478.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:58.450Z,1478853478.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:58.470Z,1478853478.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:58.843Z,1478853478.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:58.883Z,1478853478.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:59.243Z,1478853479.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:59.268Z,1478853479.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:37:59.643Z,1478853479.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:37:59.679Z,1478853479.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:00.047Z,1478853480.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:00.097Z,1478853480.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:00.441Z,1478853480.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:00.456Z,1478853480.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:00.864Z,1478853480.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:00.888Z,1478853480.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:01.247Z,1478853481.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:01.261Z,1478853481.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:01.650Z,1478853481.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:01.665Z,1478853481.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:02.048Z,1478853482.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:02.064Z,1478853482.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:02.448Z,1478853482.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:02.463Z,1478853482.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:02.853Z,1478853482.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:02.887Z,1478853482.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:03.241Z,1478853483.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:03.273Z,1478853483.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:03.668Z,1478853483.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:03.692Z,1478853483.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:04.048Z,1478853484.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:04.063Z,1478853484.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:04.447Z,1478853484.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:04.469Z,1478853484.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:04.848Z,1478853484.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:04.869Z,1478853484.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:05.266Z,1478853485.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:05.281Z,1478853485.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:05.643Z,1478853485.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:05.682Z,1478853485.682 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:05.683Z,1478853485.683 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2016-11-11T08:38:05.683Z,1478853485.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:38:05.714Z,1478853485.714 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:05.714Z,1478853485.714 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 57
2016-11-11T08:38:05.714Z,1478853485.714 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:38:05.716Z,1478853485.716 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:05.716Z,1478853485.716 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 57
2016-11-11T08:38:05.716Z,1478853485.717 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:38:05.768Z,1478853485.768 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:38:05.768Z,1478853485.768 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:38:05.768Z,1478853485.768 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:38:06.050Z,1478853486.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:06.141Z,1478853486.141 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:38:06.141Z,1478853486.141 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2016-11-11T08:38:06.142Z,1478853486.142 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:38:06.142Z,1478853486.142 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 57
2016-11-11T08:38:06.143Z,1478853486.143 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:38:06.143Z,1478853486.143 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 57
2016-11-11T08:38:06.443Z,1478853486.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:06.492Z,1478853486.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:38:06.493Z,1478853486.493 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:38:06.493Z,1478853486.493 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:38:06.525Z,1478853486.525 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:38:06.526Z,1478853486.526 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:38:06.526Z,1478853486.526 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:38:06.527Z,1478853486.527 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:38:06.527Z,1478853486.527 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:38:06.527Z,1478853486.527 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:38:06.843Z,1478853486.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:06.862Z,1478853486.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:38:06.887Z,1478853486.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:07.249Z,1478853487.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:07.295Z,1478853487.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:38:07.296Z,1478853487.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:07.649Z,1478853487.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:07.669Z,1478853487.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:38:07.670Z,1478853487.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:08.050Z,1478853488.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:08.077Z,1478853488.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:38:08.078Z,1478853488.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:08.447Z,1478853488.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:08.491Z,1478853488.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:38:08.492Z,1478853488.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:12.536Z,1478853492.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:12.620Z,1478853492.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2016-11-11T08:38:12.621Z,1478853492.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:12.730Z,1478853492.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:12.749Z,1478853492.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2016-11-11T08:38:12.750Z,1478853492.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:13.118Z,1478853493.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:13.132Z,1478853493.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2016-11-11T08:38:13.133Z,1478853493.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:13.532Z,1478853493.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:13.585Z,1478853493.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2016-11-11T08:38:13.586Z,1478853493.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:13.901Z,1478853493.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:13.916Z,1478853493.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2016-11-11T08:38:13.917Z,1478853493.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:14.310Z,1478853494.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:14.349Z,1478853494.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2016-11-11T08:38:14.350Z,1478853494.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:14.710Z,1478853494.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:14.757Z,1478853494.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2016-11-11T08:38:14.758Z,1478853494.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:15.149Z,1478853495.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:15.177Z,1478853495.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2016-11-11T08:38:15.178Z,1478853495.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:15.510Z,1478853495.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:15.528Z,1478853495.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2016-11-11T08:38:15.529Z,1478853495.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:15.901Z,1478853495.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:15.917Z,1478853495.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2016-11-11T08:38:15.918Z,1478853495.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:16.305Z,1478853496.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:16.320Z,1478853496.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2016-11-11T08:38:16.321Z,1478853496.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:16.701Z,1478853496.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:16.715Z,1478853496.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2016-11-11T08:38:16.716Z,1478853496.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:17.126Z,1478853497.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:17.141Z,1478853497.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2016-11-11T08:38:17.142Z,1478853497.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:17.501Z,1478853497.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:17.516Z,1478853497.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2016-11-11T08:38:17.517Z,1478853497.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:17.901Z,1478853497.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:17.915Z,1478853497.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2016-11-11T08:38:17.916Z,1478853497.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:18.296Z,1478853498.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:18.310Z,1478853498.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2016-11-11T08:38:18.311Z,1478853498.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:18.701Z,1478853498.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:18.716Z,1478853498.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2016-11-11T08:38:18.717Z,1478853498.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:19.097Z,1478853499.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:19.116Z,1478853499.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2016-11-11T08:38:19.117Z,1478853499.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:19.496Z,1478853499.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:19.510Z,1478853499.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2016-11-11T08:38:19.511Z,1478853499.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:19.901Z,1478853499.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:19.916Z,1478853499.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2016-11-11T08:38:19.917Z,1478853499.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:20.301Z,1478853500.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:20.315Z,1478853500.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2016-11-11T08:38:20.316Z,1478853500.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:20.697Z,1478853500.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:20.716Z,1478853500.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2016-11-11T08:38:20.717Z,1478853500.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:21.101Z,1478853501.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:21.116Z,1478853501.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2016-11-11T08:38:21.117Z,1478853501.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:21.497Z,1478853501.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:21.511Z,1478853501.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2016-11-11T08:38:21.512Z,1478853501.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:21.901Z,1478853501.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:21.920Z,1478853501.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2016-11-11T08:38:21.922Z,1478853501.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:22.297Z,1478853502.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:22.317Z,1478853502.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2016-11-11T08:38:22.318Z,1478853502.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:22.701Z,1478853502.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:22.715Z,1478853502.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2016-11-11T08:38:22.717Z,1478853502.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:23.110Z,1478853503.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:23.124Z,1478853503.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2016-11-11T08:38:23.125Z,1478853503.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:23.501Z,1478853503.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:23.516Z,1478853503.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2016-11-11T08:38:23.517Z,1478853503.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:23.901Z,1478853503.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:23.917Z,1478853503.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2016-11-11T08:38:23.918Z,1478853503.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:24.297Z,1478853504.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:24.316Z,1478853504.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2016-11-11T08:38:24.317Z,1478853504.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:24.701Z,1478853504.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:24.721Z,1478853504.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2016-11-11T08:38:24.722Z,1478853504.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:25.101Z,1478853505.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:25.115Z,1478853505.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2016-11-11T08:38:25.116Z,1478853505.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:25.501Z,1478853505.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:25.515Z,1478853505.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2016-11-11T08:38:25.516Z,1478853505.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:25.901Z,1478853505.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:25.921Z,1478853505.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:26.334Z,1478853506.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:26.357Z,1478853506.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:26.705Z,1478853506.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:26.758Z,1478853506.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:27.105Z,1478853507.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:27.120Z,1478853507.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:27.506Z,1478853507.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:27.562Z,1478853507.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:27.905Z,1478853507.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:27.920Z,1478853507.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:28.309Z,1478853508.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:28.357Z,1478853508.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:28.697Z,1478853508.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:28.712Z,1478853508.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:29.101Z,1478853509.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:29.142Z,1478853509.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:29.509Z,1478853509.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:29.524Z,1478853509.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:29.909Z,1478853509.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:29.924Z,1478853509.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:30.342Z,1478853510.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:30.358Z,1478853510.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:30.701Z,1478853510.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:30.716Z,1478853510.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:31.105Z,1478853511.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:31.119Z,1478853511.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:31.506Z,1478853511.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:31.521Z,1478853511.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:31.937Z,1478853511.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:31.965Z,1478853511.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:32.305Z,1478853512.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:32.320Z,1478853512.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:32.701Z,1478853512.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:32.716Z,1478853512.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:33.105Z,1478853513.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:33.120Z,1478853513.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:33.501Z,1478853513.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:33.516Z,1478853513.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:33.903Z,1478853513.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:33.941Z,1478853513.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:34.297Z,1478853514.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:34.317Z,1478853514.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:34.706Z,1478853514.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:34.737Z,1478853514.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:35.098Z,1478853515.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:35.129Z,1478853515.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:35.498Z,1478853515.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:35.514Z,1478853515.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:35.898Z,1478853515.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:35.913Z,1478853515.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:36.298Z,1478853516.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:36.333Z,1478853516.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:36.699Z,1478853516.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:36.734Z,1478853516.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:37.098Z,1478853517.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:37.129Z,1478853517.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:37.498Z,1478853517.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:37.537Z,1478853517.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:37.899Z,1478853517.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:37.933Z,1478853517.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:38.299Z,1478853518.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:38.333Z,1478853518.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:38.698Z,1478853518.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:38.730Z,1478853518.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:39.099Z,1478853519.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:39.133Z,1478853519.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:39.498Z,1478853519.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:39.537Z,1478853519.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:39.899Z,1478853519.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:39.993Z,1478853519.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:40.299Z,1478853520.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:40.334Z,1478853520.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:40.698Z,1478853520.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:40.722Z,1478853520.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:41.096Z,1478853521.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:41.177Z,1478853521.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:41.498Z,1478853521.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:41.529Z,1478853521.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:41.897Z,1478853521.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:41.941Z,1478853521.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:42.299Z,1478853522.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:42.329Z,1478853522.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:42.702Z,1478853522.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:42.749Z,1478853522.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:43.117Z,1478853523.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:43.158Z,1478853523.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:43.513Z,1478853523.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:43.542Z,1478853523.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:43.899Z,1478853523.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:43.926Z,1478853523.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:44.307Z,1478853524.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:44.329Z,1478853524.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:44.707Z,1478853524.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:44.729Z,1478853524.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:45.113Z,1478853525.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:45.133Z,1478853525.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:45.504Z,1478853525.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:45.519Z,1478853525.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:45.905Z,1478853525.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:45.925Z,1478853525.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:46.313Z,1478853526.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:46.328Z,1478853526.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:46.712Z,1478853526.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:46.727Z,1478853526.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:47.140Z,1478853527.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:47.173Z,1478853527.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:47.505Z,1478853527.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:47.525Z,1478853527.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:47.909Z,1478853527.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:47.929Z,1478853527.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:48.313Z,1478853528.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:48.327Z,1478853528.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:48.729Z,1478853528.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:48.769Z,1478853528.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:49.108Z,1478853529.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:49.129Z,1478853529.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:49.504Z,1478853529.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:49.519Z,1478853529.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:49.908Z,1478853529.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:49.932Z,1478853529.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:50.297Z,1478853530.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:50.329Z,1478853530.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:50.701Z,1478853530.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:50.733Z,1478853530.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:51.097Z,1478853531.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:51.133Z,1478853531.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:51.502Z,1478853531.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:51.529Z,1478853531.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:51.907Z,1478853531.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:51.929Z,1478853531.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:52.304Z,1478853532.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:52.325Z,1478853532.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:52.700Z,1478853532.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:52.725Z,1478853532.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:53.098Z,1478853533.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:53.134Z,1478853533.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:53.498Z,1478853533.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:53.525Z,1478853533.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:53.897Z,1478853533.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:53.933Z,1478853533.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:54.297Z,1478853534.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:54.317Z,1478853534.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:54.702Z,1478853534.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:54.722Z,1478853534.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:55.104Z,1478853535.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:55.177Z,1478853535.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:55.504Z,1478853535.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:55.538Z,1478853535.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:55.905Z,1478853535.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:55.922Z,1478853535.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:56.297Z,1478853536.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:56.345Z,1478853536.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:56.697Z,1478853536.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:56.730Z,1478853536.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:57.097Z,1478853537.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:57.163Z,1478853537.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:57.497Z,1478853537.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:57.529Z,1478853537.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:57.897Z,1478853537.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:57.946Z,1478853537.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:58.297Z,1478853538.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:58.333Z,1478853538.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:58.697Z,1478853538.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:58.729Z,1478853538.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:59.097Z,1478853539.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:59.133Z,1478853539.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:59.501Z,1478853539.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:59.526Z,1478853539.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:38:59.934Z,1478853539.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:38:59.961Z,1478853539.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:00.310Z,1478853540.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:00.341Z,1478853540.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:00.707Z,1478853540.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:00.722Z,1478853540.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:01.104Z,1478853541.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:01.132Z,1478853541.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:01.508Z,1478853541.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:01.523Z,1478853541.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:01.912Z,1478853541.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:01.928Z,1478853541.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:02.297Z,1478853542.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:02.325Z,1478853542.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:02.697Z,1478853542.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:02.722Z,1478853542.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:03.113Z,1478853543.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:03.129Z,1478853543.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:03.505Z,1478853543.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:03.539Z,1478853543.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:03.940Z,1478853543.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:03.973Z,1478853543.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:04.301Z,1478853544.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:04.316Z,1478853544.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:04.709Z,1478853544.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:04.729Z,1478853544.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:05.115Z,1478853545.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:05.137Z,1478853545.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:05.536Z,1478853545.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:05.577Z,1478853545.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:05.909Z,1478853545.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:05.931Z,1478853545.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:06.297Z,1478853546.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:06.329Z,1478853546.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:06.701Z,1478853546.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:06.736Z,1478853546.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:07.097Z,1478853547.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:07.131Z,1478853547.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:07.501Z,1478853547.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:07.533Z,1478853547.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:07.897Z,1478853547.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:07.912Z,1478853547.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:08.297Z,1478853548.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:08.317Z,1478853548.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:08.706Z,1478853548.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:08.720Z,1478853548.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:11.955Z,1478853551.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:12.021Z,1478853552.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:12.130Z,1478853552.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:12.181Z,1478853552.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:12.488Z,1478853552.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:12.524Z,1478853552.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:12.886Z,1478853552.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:12.948Z,1478853552.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:13.290Z,1478853553.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:13.325Z,1478853553.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:13.686Z,1478853553.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:13.738Z,1478853553.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:14.087Z,1478853554.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:14.154Z,1478853554.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:14.485Z,1478853554.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:14.517Z,1478853554.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:14.885Z,1478853554.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:14.921Z,1478853554.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:15.287Z,1478853555.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:15.321Z,1478853555.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:15.687Z,1478853555.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:15.724Z,1478853555.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:16.085Z,1478853556.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:16.126Z,1478853556.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:16.485Z,1478853556.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:16.512Z,1478853556.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:16.886Z,1478853556.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:16.925Z,1478853556.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:17.287Z,1478853557.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:17.302Z,1478853557.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:17.691Z,1478853557.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:17.727Z,1478853557.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:18.095Z,1478853558.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:18.102Z,1478853558.102 [PNI_TCM](ERROR): CRC does not match. Expected:0x48555 got:0x16833
2016-11-11T08:39:18.138Z,1478853558.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:18.493Z,1478853558.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:18.508Z,1478853558.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:18.896Z,1478853558.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:18.911Z,1478853558.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:19.292Z,1478853559.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:19.318Z,1478853559.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:19.695Z,1478853559.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:19.702Z,1478853559.702 [PNI_TCM](ERROR): CRC does not match. Expected:0x31167 got:0x49581
2016-11-11T08:39:19.747Z,1478853559.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:20.094Z,1478853560.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:20.110Z,1478853560.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:20.493Z,1478853560.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:20.513Z,1478853560.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:20.892Z,1478853560.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:20.918Z,1478853560.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:21.287Z,1478853561.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:21.314Z,1478853561.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:21.687Z,1478853561.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:21.721Z,1478853561.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:22.086Z,1478853562.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:22.111Z,1478853562.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:22.490Z,1478853562.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:22.529Z,1478853562.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:22.888Z,1478853562.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:22.921Z,1478853562.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:23.288Z,1478853563.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:23.321Z,1478853563.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:23.685Z,1478853563.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:23.713Z,1478853563.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:24.085Z,1478853564.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:24.125Z,1478853564.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:24.491Z,1478853564.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:24.498Z,1478853564.498 [PNI_TCM](ERROR): CRC does not match. Expected:0x1830 got:0x42439
2016-11-11T08:39:24.529Z,1478853564.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:24.887Z,1478853564.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:24.915Z,1478853564.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:25.289Z,1478853565.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:25.305Z,1478853565.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:25.686Z,1478853565.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:25.704Z,1478853565.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:26.090Z,1478853566.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:26.157Z,1478853566.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:26.492Z,1478853566.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:26.507Z,1478853566.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:26.892Z,1478853566.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:26.945Z,1478853566.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:27.294Z,1478853567.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:27.309Z,1478853567.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:27.696Z,1478853567.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:27.735Z,1478853567.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:28.093Z,1478853568.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:28.113Z,1478853568.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:28.492Z,1478853568.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:28.547Z,1478853568.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:28.896Z,1478853568.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:28.910Z,1478853568.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:29.296Z,1478853569.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:29.317Z,1478853569.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:29.685Z,1478853569.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:29.717Z,1478853569.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:30.096Z,1478853570.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:30.111Z,1478853570.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:30.487Z,1478853570.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:30.521Z,1478853570.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:30.887Z,1478853570.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:30.921Z,1478853570.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:31.285Z,1478853571.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:31.319Z,1478853571.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:31.685Z,1478853571.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:31.718Z,1478853571.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:32.087Z,1478853572.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:32.123Z,1478853572.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:32.487Z,1478853572.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:32.520Z,1478853572.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:32.885Z,1478853572.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:32.921Z,1478853572.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:33.285Z,1478853573.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:33.317Z,1478853573.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:33.692Z,1478853573.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:33.718Z,1478853573.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:34.086Z,1478853574.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:34.113Z,1478853574.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:34.485Z,1478853574.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:34.500Z,1478853574.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:34.897Z,1478853574.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:34.937Z,1478853574.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:35.291Z,1478853575.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:35.306Z,1478853575.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:35.693Z,1478853575.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:35.708Z,1478853575.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:36.097Z,1478853576.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:36.117Z,1478853576.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:36.492Z,1478853576.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:36.507Z,1478853576.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:36.894Z,1478853576.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:36.910Z,1478853576.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:37.288Z,1478853577.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:37.319Z,1478853577.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:37.685Z,1478853577.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:37.717Z,1478853577.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:38.085Z,1478853578.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:38.117Z,1478853578.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:38.488Z,1478853578.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:38.523Z,1478853578.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:38.885Z,1478853578.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:38.925Z,1478853578.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:39.289Z,1478853579.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:39.304Z,1478853579.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:39.690Z,1478853579.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:39.714Z,1478853579.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:40.094Z,1478853580.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:40.146Z,1478853580.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:40.492Z,1478853580.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:40.507Z,1478853580.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:40.885Z,1478853580.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:40.920Z,1478853580.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:41.292Z,1478853581.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:41.333Z,1478853581.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:41.693Z,1478853581.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:41.708Z,1478853581.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:42.097Z,1478853582.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:42.152Z,1478853582.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:42.497Z,1478853582.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:42.538Z,1478853582.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:42.885Z,1478853582.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:42.917Z,1478853582.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:43.293Z,1478853583.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:43.315Z,1478853583.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:43.685Z,1478853583.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:43.719Z,1478853583.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:44.085Z,1478853584.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:44.119Z,1478853584.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:44.496Z,1478853584.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:44.512Z,1478853584.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:44.885Z,1478853584.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:44.918Z,1478853584.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:45.285Z,1478853585.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:45.321Z,1478853585.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:45.685Z,1478853585.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:45.716Z,1478853585.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:46.085Z,1478853586.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:46.121Z,1478853586.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:46.485Z,1478853586.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:46.508Z,1478853586.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:46.889Z,1478853586.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:46.920Z,1478853586.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:47.285Z,1478853587.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:47.305Z,1478853587.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:47.689Z,1478853587.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:47.717Z,1478853587.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:48.089Z,1478853588.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:48.108Z,1478853588.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:48.492Z,1478853588.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:48.518Z,1478853588.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:48.895Z,1478853588.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:48.911Z,1478853588.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:49.301Z,1478853589.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:49.321Z,1478853589.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:49.685Z,1478853589.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:49.710Z,1478853589.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:50.085Z,1478853590.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:50.117Z,1478853590.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:50.485Z,1478853590.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:50.511Z,1478853590.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:50.885Z,1478853590.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:50.925Z,1478853590.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:51.286Z,1478853591.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:51.314Z,1478853591.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:51.686Z,1478853591.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:51.705Z,1478853591.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:52.089Z,1478853592.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:52.109Z,1478853592.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:52.491Z,1478853592.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:52.521Z,1478853592.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:52.893Z,1478853592.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:52.908Z,1478853592.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:53.291Z,1478853593.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:53.314Z,1478853593.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:53.693Z,1478853593.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:53.713Z,1478853593.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:54.092Z,1478853594.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:54.133Z,1478853594.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:54.489Z,1478853594.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:54.521Z,1478853594.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:54.885Z,1478853594.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:54.949Z,1478853594.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:55.285Z,1478853595.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:55.322Z,1478853595.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:55.685Z,1478853595.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:55.737Z,1478853595.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:56.084Z,1478853596.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:56.099Z,1478853596.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:56.485Z,1478853596.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:56.541Z,1478853596.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:56.885Z,1478853596.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:56.929Z,1478853596.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:57.282Z,1478853597.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:57.326Z,1478853597.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:57.685Z,1478853597.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:57.728Z,1478853597.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:58.085Z,1478853598.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:58.127Z,1478853598.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:58.485Z,1478853598.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:58.525Z,1478853598.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:58.885Z,1478853598.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:58.905Z,1478853598.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:59.288Z,1478853599.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:59.303Z,1478853599.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:39:59.688Z,1478853599.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:39:59.704Z,1478853599.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:00.092Z,1478853600.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:00.113Z,1478853600.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:00.488Z,1478853600.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:00.503Z,1478853600.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:00.891Z,1478853600.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:00.906Z,1478853600.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:01.292Z,1478853601.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:01.307Z,1478853601.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:01.692Z,1478853601.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:01.706Z,1478853601.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:02.092Z,1478853602.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:02.107Z,1478853602.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:02.492Z,1478853602.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:02.517Z,1478853602.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:02.893Z,1478853602.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:02.913Z,1478853602.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:03.292Z,1478853603.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:03.308Z,1478853603.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:03.696Z,1478853603.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:03.711Z,1478853603.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:04.088Z,1478853604.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:04.109Z,1478853604.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:04.493Z,1478853604.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:04.508Z,1478853604.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:04.892Z,1478853604.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:04.913Z,1478853604.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:05.292Z,1478853605.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:05.313Z,1478853605.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:05.693Z,1478853605.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:05.709Z,1478853605.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:06.089Z,1478853606.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:06.110Z,1478853606.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:06.493Z,1478853606.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:06.513Z,1478853606.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:06.888Z,1478853606.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:06.911Z,1478853606.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:07.285Z,1478853607.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:07.317Z,1478853607.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:07.685Z,1478853607.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:07.721Z,1478853607.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:07.730Z,1478853607.730 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T08:40:07.730Z,1478853607.730 [Default:CheckIn:C.Wait] Stopped
2016-11-11T08:40:07.730Z,1478853607.730 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T08:40:07.730Z,1478853607.730 [Default:CheckIn:D] Running Loop=1
2016-11-11T08:40:08.085Z,1478853608.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:08.121Z,1478853608.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:08.130Z,1478853608.130 [Default:CheckIn:D] Stopped
2016-11-11T08:40:08.130Z,1478853608.130 [Default:CheckIn:E] Running Loop=1
2016-11-11T08:40:08.485Z,1478853608.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:08.516Z,1478853608.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:08.525Z,1478853608.525 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 230.113672 min 
2016-11-11T08:40:08.525Z,1478853608.525 [Default:CheckIn:E] Stopped
2016-11-11T08:40:08.525Z,1478853608.525 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T08:40:08.525Z,1478853608.526 [Default:CheckIn] Stopped
2016-11-11T08:40:08.526Z,1478853608.526 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T08:40:08.526Z,1478853608.526 [Default:CheckIn](INFO): Running loop #23
2016-11-11T08:40:08.526Z,1478853608.526 [Default:CheckIn] Running Loop=23
2016-11-11T08:40:08.526Z,1478853608.526 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T08:40:08.526Z,1478853608.526 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T08:40:08.885Z,1478853608.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:08.967Z,1478853608.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:12.189Z,1478853612.188 [NAL9602](INFO): Powering up
2016-11-11T08:40:12.206Z,1478853612.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:12.235Z,1478853612.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:12.346Z,1478853612.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:12.381Z,1478853612.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:12.693Z,1478853612.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:12.734Z,1478853612.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:13.091Z,1478853613.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:13.133Z,1478853613.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:13.493Z,1478853613.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:13.545Z,1478853613.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:13.895Z,1478853613.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:13.910Z,1478853613.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:14.292Z,1478853614.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:14.334Z,1478853614.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:14.690Z,1478853614.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:14.706Z,1478853614.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:15.094Z,1478853615.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:15.110Z,1478853615.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:15.494Z,1478853615.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:15.509Z,1478853615.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:15.892Z,1478853615.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:15.913Z,1478853615.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:16.299Z,1478853616.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:16.313Z,1478853616.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:16.693Z,1478853616.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:16.712Z,1478853616.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:17.094Z,1478853617.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:17.109Z,1478853617.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:17.486Z,1478853617.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:17.521Z,1478853617.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:17.887Z,1478853617.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:17.917Z,1478853617.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:18.287Z,1478853618.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:18.322Z,1478853618.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:18.691Z,1478853618.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:18.716Z,1478853618.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:19.086Z,1478853619.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:19.121Z,1478853619.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:19.486Z,1478853619.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:19.521Z,1478853619.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:19.887Z,1478853619.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:19.921Z,1478853619.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:20.290Z,1478853620.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:20.316Z,1478853620.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:20.725Z,1478853620.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:20.765Z,1478853620.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:21.106Z,1478853621.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:21.140Z,1478853621.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:21.492Z,1478853621.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:21.507Z,1478853621.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:21.893Z,1478853621.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:21.908Z,1478853621.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:22.296Z,1478853622.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:22.311Z,1478853622.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:22.702Z,1478853622.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:22.718Z,1478853622.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:23.069Z,1478853623.069 [NAL9602](INFO): NAL9602 initialized
2016-11-11T08:40:23.090Z,1478853623.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:23.109Z,1478853623.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:23.502Z,1478853623.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:23.521Z,1478853623.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:23.869Z,1478853623.869 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T08:40:23.869Z,1478853623.869 [NAL9602] Data Fault, FailCount= 3
2016-11-11T08:40:23.869Z,1478853623.869 [NAL9602](ERROR): Data Fault
2016-11-11T08:40:23.906Z,1478853623.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:23.952Z,1478853623.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:23.987Z,1478853623.987 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T08:40:24.269Z,1478853624.269 [NAL9602](INFO): Powering down
2016-11-11T08:40:24.304Z,1478853624.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:24.336Z,1478853624.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:24.712Z,1478853624.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:24.739Z,1478853624.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:25.086Z,1478853625.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:25.125Z,1478853625.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:25.175Z,1478853625.175 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T08:40:25.175Z,1478853625.175 [NAL9602] No Fault, FailCount= 3
2016-11-11T08:40:25.498Z,1478853625.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:25.529Z,1478853625.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:25.905Z,1478853625.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:25.952Z,1478853625.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:26.320Z,1478853626.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:26.409Z,1478853626.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:26.692Z,1478853626.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:26.719Z,1478853626.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:27.087Z,1478853627.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:27.137Z,1478853627.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:27.490Z,1478853627.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:27.525Z,1478853627.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:27.887Z,1478853627.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:27.937Z,1478853627.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:28.289Z,1478853628.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:28.341Z,1478853628.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:28.690Z,1478853628.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:28.731Z,1478853628.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:29.090Z,1478853629.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:29.106Z,1478853629.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:29.469Z,1478853629.469 [NAL9602](INFO): Powering up NAL9602
2016-11-11T08:40:29.488Z,1478853629.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:29.509Z,1478853629.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:29.894Z,1478853629.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:29.909Z,1478853629.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:30.290Z,1478853630.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:30.306Z,1478853630.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:30.694Z,1478853630.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:30.709Z,1478853630.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:31.094Z,1478853631.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:31.109Z,1478853631.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:31.493Z,1478853631.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:31.508Z,1478853631.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:31.898Z,1478853631.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:31.917Z,1478853631.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:32.294Z,1478853632.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:32.309Z,1478853632.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:32.687Z,1478853632.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:32.713Z,1478853632.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:33.101Z,1478853633.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:33.125Z,1478853633.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:33.486Z,1478853633.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:33.521Z,1478853633.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:33.887Z,1478853633.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:33.921Z,1478853633.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:34.299Z,1478853634.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:34.315Z,1478853634.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:34.687Z,1478853634.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:34.721Z,1478853634.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:35.087Z,1478853635.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:35.121Z,1478853635.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:35.487Z,1478853635.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:35.515Z,1478853635.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:35.890Z,1478853635.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:35.905Z,1478853635.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:36.291Z,1478853636.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:36.306Z,1478853636.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:36.688Z,1478853636.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:36.721Z,1478853636.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:37.102Z,1478853637.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:37.117Z,1478853637.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:37.501Z,1478853637.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:37.529Z,1478853637.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:37.905Z,1478853637.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:37.929Z,1478853637.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:38.289Z,1478853638.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:38.314Z,1478853638.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:38.689Z,1478853638.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:38.725Z,1478853638.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:39.089Z,1478853639.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:39.126Z,1478853639.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:39.492Z,1478853639.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:39.525Z,1478853639.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:39.887Z,1478853639.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:39.922Z,1478853639.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:40.314Z,1478853640.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:40.329Z,1478853640.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:40.669Z,1478853640.669 [NAL9602](INFO): NAL9602 initialized
2016-11-11T08:40:40.695Z,1478853640.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:40.749Z,1478853640.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:41.103Z,1478853641.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:41.134Z,1478853641.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:41.511Z,1478853641.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:41.547Z,1478853641.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:41.900Z,1478853641.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:41.948Z,1478853641.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:42.309Z,1478853642.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:42.332Z,1478853642.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:42.702Z,1478853642.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:42.742Z,1478853642.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:43.124Z,1478853643.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:43.197Z,1478853643.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:43.507Z,1478853643.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:43.522Z,1478853643.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:43.906Z,1478853643.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:43.922Z,1478853643.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:44.306Z,1478853644.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:44.321Z,1478853644.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:44.688Z,1478853644.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:44.724Z,1478853644.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:45.094Z,1478853645.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:45.120Z,1478853645.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:45.487Z,1478853645.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:45.521Z,1478853645.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:45.888Z,1478853645.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:45.925Z,1478853645.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:46.288Z,1478853646.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:46.315Z,1478853646.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:46.687Z,1478853646.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:46.725Z,1478853646.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:47.088Z,1478853647.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:47.103Z,1478853647.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:47.491Z,1478853647.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:47.506Z,1478853647.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:47.887Z,1478853647.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:47.909Z,1478853647.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:48.296Z,1478853648.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:48.311Z,1478853648.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:48.708Z,1478853648.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:48.741Z,1478853648.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:49.099Z,1478853649.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:49.143Z,1478853649.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:49.504Z,1478853649.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:49.519Z,1478853649.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:49.895Z,1478853649.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:49.914Z,1478853649.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:50.300Z,1478853650.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:50.315Z,1478853650.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:50.698Z,1478853650.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:50.714Z,1478853650.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:51.096Z,1478853651.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:51.126Z,1478853651.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:51.488Z,1478853651.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:51.525Z,1478853651.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:51.888Z,1478853651.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:51.929Z,1478853651.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:52.288Z,1478853652.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:52.325Z,1478853652.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:52.687Z,1478853652.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:52.702Z,1478853652.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:53.088Z,1478853653.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:53.103Z,1478853653.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:53.504Z,1478853653.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:53.534Z,1478853653.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:53.898Z,1478853653.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:53.930Z,1478853653.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:54.325Z,1478853654.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:54.350Z,1478853654.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:54.710Z,1478853654.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:54.740Z,1478853654.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:55.090Z,1478853655.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:55.114Z,1478853655.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:55.498Z,1478853655.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:55.551Z,1478853655.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:55.892Z,1478853655.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:55.927Z,1478853655.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:56.300Z,1478853656.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:56.317Z,1478853656.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:56.697Z,1478853656.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:56.713Z,1478853656.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:57.087Z,1478853657.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:57.121Z,1478853657.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:57.506Z,1478853657.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:57.521Z,1478853657.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:57.905Z,1478853657.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:57.924Z,1478853657.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:58.312Z,1478853658.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:58.329Z,1478853658.329 [BPC1](ERROR): Failed to receive battery data
2016-11-11T08:40:58.329Z,1478853658.329 [BPC1] Communications Fault, FailCount= 1
2016-11-11T08:40:58.329Z,1478853658.329 [BPC1](ERROR): Communications Fault
2016-11-11T08:40:58.355Z,1478853658.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:58.420Z,1478853658.420 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T08:40:58.700Z,1478853658.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:58.724Z,1478853658.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:59.102Z,1478853659.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:59.124Z,1478853659.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:59.502Z,1478853659.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:40:59.541Z,1478853659.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:40:59.573Z,1478853659.573 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:40:59.574Z,1478853659.574 [BPC1] No Fault, FailCount= 1
2016-11-11T08:40:59.932Z,1478853659.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:00.026Z,1478853660.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:00.296Z,1478853660.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:00.312Z,1478853660.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:00.695Z,1478853660.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:00.746Z,1478853660.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:01.098Z,1478853661.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:01.117Z,1478853661.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:01.491Z,1478853661.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:01.507Z,1478853661.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:01.893Z,1478853661.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:01.916Z,1478853661.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:02.298Z,1478853662.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:02.314Z,1478853662.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:02.696Z,1478853662.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:02.716Z,1478853662.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:03.089Z,1478853663.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:03.125Z,1478853663.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:03.487Z,1478853663.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:03.522Z,1478853663.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:03.909Z,1478853663.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:03.928Z,1478853663.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:04.300Z,1478853664.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:04.326Z,1478853664.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:04.703Z,1478853664.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:04.741Z,1478853664.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:05.109Z,1478853665.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:05.129Z,1478853665.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:05.488Z,1478853665.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:05.532Z,1478853665.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:05.887Z,1478853665.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:05.932Z,1478853665.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:06.288Z,1478853666.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:06.344Z,1478853666.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:06.691Z,1478853666.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:06.706Z,1478853666.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:06.706Z,1478853666.706 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2016-11-11T08:41:06.706Z,1478853666.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:41:06.713Z,1478853666.713 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:06.713Z,1478853666.713 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 58
2016-11-11T08:41:06.713Z,1478853666.713 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:41:06.732Z,1478853666.731 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:06.732Z,1478853666.732 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 58
2016-11-11T08:41:06.732Z,1478853666.732 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:41:06.754Z,1478853666.754 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:41:06.755Z,1478853666.755 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:41:06.759Z,1478853666.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:41:07.099Z,1478853667.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:07.166Z,1478853667.166 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:41:07.166Z,1478853667.166 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2016-11-11T08:41:07.167Z,1478853667.167 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:41:07.167Z,1478853667.167 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 58
2016-11-11T08:41:07.167Z,1478853667.167 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:41:07.168Z,1478853667.168 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 58
2016-11-11T08:41:07.497Z,1478853667.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:07.542Z,1478853667.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:41:07.542Z,1478853667.542 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:41:07.543Z,1478853667.543 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:41:07.548Z,1478853667.548 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:41:07.548Z,1478853667.548 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:41:07.548Z,1478853667.548 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:41:07.549Z,1478853667.549 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:41:07.549Z,1478853667.549 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:41:07.550Z,1478853667.550 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:41:07.889Z,1478853667.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:07.925Z,1478853667.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:41:07.927Z,1478853667.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:08.295Z,1478853668.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:08.309Z,1478853668.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:41:08.310Z,1478853668.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:08.696Z,1478853668.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:08.715Z,1478853668.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:41:08.716Z,1478853668.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:09.108Z,1478853669.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:09.137Z,1478853669.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:41:09.138Z,1478853669.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:12.536Z,1478853672.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:12.562Z,1478853672.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2016-11-11T08:41:12.563Z,1478853672.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:12.666Z,1478853672.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:12.711Z,1478853672.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T08:41:12.712Z,1478853672.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:13.023Z,1478853673.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:13.038Z,1478853673.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2016-11-11T08:41:13.040Z,1478853673.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:13.421Z,1478853673.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:13.436Z,1478853673.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2016-11-11T08:41:13.437Z,1478853673.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:13.816Z,1478853673.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:13.848Z,1478853673.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2016-11-11T08:41:13.849Z,1478853673.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:14.225Z,1478853674.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:14.245Z,1478853674.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2016-11-11T08:41:14.246Z,1478853674.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:14.613Z,1478853674.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:14.644Z,1478853674.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2016-11-11T08:41:14.645Z,1478853674.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:15.013Z,1478853675.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:15.045Z,1478853675.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2016-11-11T08:41:15.046Z,1478853675.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:15.417Z,1478853675.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:15.453Z,1478853675.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2016-11-11T08:41:15.454Z,1478853675.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:15.817Z,1478853675.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:15.832Z,1478853675.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2016-11-11T08:41:15.833Z,1478853675.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:16.224Z,1478853676.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:16.238Z,1478853676.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2016-11-11T08:41:16.239Z,1478853676.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:16.620Z,1478853676.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:16.635Z,1478853676.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2016-11-11T08:41:16.636Z,1478853676.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:17.016Z,1478853677.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:17.047Z,1478853677.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2016-11-11T08:41:17.048Z,1478853677.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:17.414Z,1478853677.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:17.445Z,1478853677.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2016-11-11T08:41:17.446Z,1478853677.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:17.825Z,1478853677.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:17.889Z,1478853677.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T08:41:17.890Z,1478853677.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:18.213Z,1478853678.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:18.249Z,1478853678.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2016-11-11T08:41:18.250Z,1478853678.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:18.613Z,1478853678.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:18.656Z,1478853678.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T08:41:18.658Z,1478853678.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:19.013Z,1478853679.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:19.056Z,1478853679.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T08:41:19.057Z,1478853679.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:19.413Z,1478853679.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:19.478Z,1478853679.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T08:41:19.479Z,1478853679.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:19.818Z,1478853679.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:19.833Z,1478853679.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2016-11-11T08:41:19.834Z,1478853679.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:20.232Z,1478853680.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:20.281Z,1478853680.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T08:41:20.283Z,1478853680.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:20.636Z,1478853680.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:20.667Z,1478853680.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T08:41:20.668Z,1478853680.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:21.018Z,1478853681.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:21.057Z,1478853681.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T08:41:21.058Z,1478853681.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:21.421Z,1478853681.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:21.467Z,1478853681.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T08:41:21.468Z,1478853681.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:21.821Z,1478853681.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:21.835Z,1478853681.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2016-11-11T08:41:21.836Z,1478853681.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:22.216Z,1478853682.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:22.245Z,1478853682.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2016-11-11T08:41:22.246Z,1478853682.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:22.621Z,1478853682.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:22.637Z,1478853682.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2016-11-11T08:41:22.638Z,1478853682.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:23.022Z,1478853683.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:23.040Z,1478853683.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2016-11-11T08:41:23.041Z,1478853683.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:23.413Z,1478853683.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:23.449Z,1478853683.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2016-11-11T08:41:23.449Z,1478853683.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:23.813Z,1478853683.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:23.849Z,1478853683.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2016-11-11T08:41:23.850Z,1478853683.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:24.213Z,1478853684.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:24.257Z,1478853684.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T08:41:24.257Z,1478853684.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:24.610Z,1478853684.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:24.625Z,1478853684.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2016-11-11T08:41:24.626Z,1478853684.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:25.013Z,1478853685.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:25.029Z,1478853685.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2016-11-11T08:41:25.030Z,1478853685.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:25.413Z,1478853685.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:25.432Z,1478853685.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2016-11-11T08:41:25.433Z,1478853685.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:25.817Z,1478853685.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:25.840Z,1478853685.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2016-11-11T08:41:25.840Z,1478853685.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:26.220Z,1478853686.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:26.234Z,1478853686.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2016-11-11T08:41:26.235Z,1478853686.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:26.622Z,1478853686.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:26.636Z,1478853686.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2016-11-11T08:41:26.637Z,1478853686.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:27.016Z,1478853687.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:27.048Z,1478853687.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:27.413Z,1478853687.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:27.447Z,1478853687.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:27.813Z,1478853687.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:27.848Z,1478853687.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:28.213Z,1478853688.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:28.245Z,1478853688.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:28.617Z,1478853688.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:28.649Z,1478853688.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:29.014Z,1478853689.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:29.041Z,1478853689.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:29.428Z,1478853689.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:29.460Z,1478853689.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:29.832Z,1478853689.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:29.873Z,1478853689.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:30.217Z,1478853690.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:30.232Z,1478853690.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:30.642Z,1478853690.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:30.670Z,1478853690.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:31.025Z,1478853691.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:31.045Z,1478853691.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:31.413Z,1478853691.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:31.445Z,1478853691.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:31.813Z,1478853691.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:31.869Z,1478853691.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:32.213Z,1478853692.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:32.253Z,1478853692.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:32.621Z,1478853692.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:32.635Z,1478853692.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:33.013Z,1478853693.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:33.038Z,1478853693.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:33.435Z,1478853693.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:33.492Z,1478853693.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:33.836Z,1478853693.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:33.852Z,1478853693.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:34.213Z,1478853694.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:34.261Z,1478853694.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:34.613Z,1478853694.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:34.628Z,1478853694.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:35.013Z,1478853695.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:35.068Z,1478853695.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:35.417Z,1478853695.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:35.467Z,1478853695.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:35.816Z,1478853695.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:35.837Z,1478853695.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:36.217Z,1478853696.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:36.239Z,1478853696.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:36.616Z,1478853696.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:36.644Z,1478853696.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:37.020Z,1478853697.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:37.041Z,1478853697.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:37.413Z,1478853697.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:37.445Z,1478853697.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:37.835Z,1478853697.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:37.852Z,1478853697.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:38.230Z,1478853698.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:38.245Z,1478853698.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:38.613Z,1478853698.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:38.645Z,1478853698.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:39.013Z,1478853699.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:39.045Z,1478853699.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:39.413Z,1478853699.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:39.451Z,1478853699.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:39.813Z,1478853699.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:39.845Z,1478853699.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:40.213Z,1478853700.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:40.245Z,1478853700.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:40.621Z,1478853700.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:40.656Z,1478853700.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:41.014Z,1478853701.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:41.054Z,1478853701.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:41.413Z,1478853701.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:41.453Z,1478853701.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:41.827Z,1478853701.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:41.853Z,1478853701.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:42.240Z,1478853702.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:42.264Z,1478853702.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:42.613Z,1478853702.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:42.633Z,1478853702.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:43.018Z,1478853703.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:43.033Z,1478853703.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:43.418Z,1478853703.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:43.438Z,1478853703.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:43.816Z,1478853703.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:43.850Z,1478853703.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:44.228Z,1478853704.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:44.247Z,1478853704.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:44.614Z,1478853704.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:44.652Z,1478853704.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:45.018Z,1478853705.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:45.044Z,1478853705.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:45.421Z,1478853705.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:45.465Z,1478853705.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:45.821Z,1478853705.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:45.860Z,1478853705.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:46.221Z,1478853706.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:46.252Z,1478853706.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:46.613Z,1478853706.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:46.633Z,1478853706.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:47.021Z,1478853707.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:47.067Z,1478853707.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:47.419Z,1478853707.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:47.436Z,1478853707.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:47.820Z,1478853707.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:47.841Z,1478853707.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:48.221Z,1478853708.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:48.273Z,1478853708.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:48.620Z,1478853708.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:48.636Z,1478853708.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:49.021Z,1478853709.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:49.110Z,1478853709.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:49.426Z,1478853709.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:49.489Z,1478853709.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:49.816Z,1478853709.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:49.848Z,1478853709.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:50.235Z,1478853710.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:50.261Z,1478853710.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:50.637Z,1478853710.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:50.653Z,1478853710.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:51.013Z,1478853711.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:51.053Z,1478853711.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:51.413Z,1478853711.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:51.450Z,1478853711.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:51.814Z,1478853711.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:51.851Z,1478853711.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:52.229Z,1478853712.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:52.261Z,1478853712.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:52.623Z,1478853712.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:52.652Z,1478853712.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:53.014Z,1478853713.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:53.033Z,1478853713.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:53.417Z,1478853713.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:53.456Z,1478853713.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:53.816Z,1478853713.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:53.838Z,1478853713.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:54.217Z,1478853714.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:54.237Z,1478853714.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:54.621Z,1478853714.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:54.636Z,1478853714.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:55.021Z,1478853715.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:55.039Z,1478853715.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:55.426Z,1478853715.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:55.443Z,1478853715.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:55.825Z,1478853715.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:55.868Z,1478853715.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:56.220Z,1478853716.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:56.242Z,1478853716.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:56.624Z,1478853716.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:56.648Z,1478853716.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:57.017Z,1478853717.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:57.057Z,1478853717.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:57.413Z,1478853717.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:57.445Z,1478853717.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:57.814Z,1478853717.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:57.842Z,1478853717.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:58.213Z,1478853718.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:58.253Z,1478853718.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:58.613Z,1478853718.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:58.650Z,1478853718.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:59.015Z,1478853719.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:59.038Z,1478853719.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:59.414Z,1478853719.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:59.458Z,1478853719.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:41:59.814Z,1478853719.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:41:59.858Z,1478853719.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:00.228Z,1478853720.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:00.263Z,1478853720.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:00.637Z,1478853720.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:00.665Z,1478853720.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:01.024Z,1478853721.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:01.094Z,1478853721.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:01.421Z,1478853721.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:01.440Z,1478853721.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:01.818Z,1478853721.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:01.873Z,1478853721.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:02.223Z,1478853722.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:02.253Z,1478853722.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:02.621Z,1478853722.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:02.682Z,1478853722.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:03.016Z,1478853723.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:03.072Z,1478853723.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:03.423Z,1478853723.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:03.438Z,1478853723.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:03.813Z,1478853723.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:03.848Z,1478853723.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:04.213Z,1478853724.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:04.255Z,1478853724.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:04.620Z,1478853724.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:04.637Z,1478853724.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:05.029Z,1478853725.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:05.054Z,1478853725.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:05.431Z,1478853725.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:05.473Z,1478853725.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:05.813Z,1478853725.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:05.845Z,1478853725.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:06.213Z,1478853726.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:06.243Z,1478853726.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:06.615Z,1478853726.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:06.643Z,1478853726.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:07.016Z,1478853727.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:07.055Z,1478853727.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:07.413Z,1478853727.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:07.433Z,1478853727.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:07.819Z,1478853727.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:07.835Z,1478853727.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:08.224Z,1478853728.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:08.238Z,1478853728.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:08.620Z,1478853728.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:08.646Z,1478853728.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:09.022Z,1478853729.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:09.040Z,1478853729.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:09.431Z,1478853729.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:09.469Z,1478853729.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:12.723Z,1478853732.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:12.739Z,1478853732.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:12.860Z,1478853732.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:12.901Z,1478853732.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:13.232Z,1478853733.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:13.247Z,1478853733.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:13.618Z,1478853733.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:13.646Z,1478853733.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:14.014Z,1478853734.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:14.073Z,1478853734.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:14.413Z,1478853734.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:14.446Z,1478853734.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:14.814Z,1478853734.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:14.849Z,1478853734.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:15.214Z,1478853735.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:15.269Z,1478853735.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:15.614Z,1478853735.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:15.657Z,1478853735.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:16.014Z,1478853736.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:16.030Z,1478853736.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:16.414Z,1478853736.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:16.461Z,1478853736.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:16.814Z,1478853736.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:16.833Z,1478853736.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:17.229Z,1478853737.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:17.281Z,1478853737.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:17.625Z,1478853737.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:17.677Z,1478853737.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:18.028Z,1478853738.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:18.069Z,1478853738.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:18.429Z,1478853738.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:18.444Z,1478853738.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:18.817Z,1478853738.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:18.841Z,1478853738.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:19.217Z,1478853739.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:19.242Z,1478853739.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:19.613Z,1478853739.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:19.646Z,1478853739.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:20.013Z,1478853740.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:20.046Z,1478853740.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:20.413Z,1478853740.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:20.444Z,1478853740.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:20.813Z,1478853740.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:20.846Z,1478853740.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:21.213Z,1478853741.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:21.245Z,1478853741.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:21.621Z,1478853741.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:21.657Z,1478853741.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:22.010Z,1478853742.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:22.037Z,1478853742.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:22.436Z,1478853742.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:22.456Z,1478853742.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:22.823Z,1478853742.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:22.848Z,1478853742.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:23.213Z,1478853743.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:23.240Z,1478853743.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:23.613Z,1478853743.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:23.653Z,1478853743.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:24.013Z,1478853744.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:24.028Z,1478853744.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:24.418Z,1478853744.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:24.452Z,1478853744.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:24.821Z,1478853744.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:24.837Z,1478853744.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:25.219Z,1478853745.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:25.241Z,1478853745.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:25.625Z,1478853745.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:25.640Z,1478853745.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:26.016Z,1478853746.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:26.044Z,1478853746.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:26.435Z,1478853746.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:26.450Z,1478853746.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:26.832Z,1478853746.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:26.855Z,1478853746.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:27.240Z,1478853747.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:27.255Z,1478853747.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:27.624Z,1478853747.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:27.653Z,1478853747.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:28.014Z,1478853748.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:28.041Z,1478853748.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:28.414Z,1478853748.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:28.465Z,1478853748.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:28.817Z,1478853748.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:28.831Z,1478853748.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:29.213Z,1478853749.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:29.233Z,1478853749.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:29.617Z,1478853749.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:29.669Z,1478853749.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:30.016Z,1478853750.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:30.045Z,1478853750.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:30.421Z,1478853750.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:30.474Z,1478853750.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:30.813Z,1478853750.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:30.839Z,1478853750.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:31.236Z,1478853751.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:31.278Z,1478853751.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:31.636Z,1478853751.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:31.687Z,1478853751.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:32.013Z,1478853752.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:32.045Z,1478853752.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:32.413Z,1478853752.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:32.448Z,1478853752.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:32.814Z,1478853752.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:32.858Z,1478853752.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:33.213Z,1478853753.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:33.249Z,1478853753.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:33.617Z,1478853753.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:33.631Z,1478853753.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:34.017Z,1478853754.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:34.032Z,1478853754.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:34.421Z,1478853754.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:34.436Z,1478853754.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:34.819Z,1478853754.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:34.841Z,1478853754.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:35.228Z,1478853755.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:35.242Z,1478853755.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:35.626Z,1478853755.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:35.645Z,1478853755.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:36.020Z,1478853756.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:36.041Z,1478853756.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:36.421Z,1478853756.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:36.436Z,1478853756.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:36.825Z,1478853756.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:36.840Z,1478853756.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:37.213Z,1478853757.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:37.247Z,1478853757.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:37.613Z,1478853757.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:37.644Z,1478853757.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:38.025Z,1478853758.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:38.045Z,1478853758.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:38.424Z,1478853758.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:38.445Z,1478853758.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:38.813Z,1478853758.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:38.848Z,1478853758.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:39.225Z,1478853759.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:39.245Z,1478853759.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:39.617Z,1478853759.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:39.649Z,1478853759.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:40.014Z,1478853760.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:40.040Z,1478853760.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:40.413Z,1478853760.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:40.445Z,1478853760.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:40.817Z,1478853760.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:40.849Z,1478853760.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:41.213Z,1478853761.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:41.249Z,1478853761.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:41.618Z,1478853761.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:41.653Z,1478853761.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:42.021Z,1478853762.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:42.053Z,1478853762.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:42.417Z,1478853762.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:42.477Z,1478853762.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:42.821Z,1478853762.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:42.841Z,1478853762.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:43.217Z,1478853763.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:43.237Z,1478853763.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:43.627Z,1478853763.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:43.693Z,1478853763.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:44.030Z,1478853764.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:44.049Z,1478853764.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:44.424Z,1478853764.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:44.440Z,1478853764.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:44.821Z,1478853764.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:44.877Z,1478853764.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:45.213Z,1478853765.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:45.241Z,1478853765.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:45.617Z,1478853765.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:45.665Z,1478853765.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:46.013Z,1478853766.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:46.058Z,1478853766.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:46.417Z,1478853766.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:46.453Z,1478853766.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:46.813Z,1478853766.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:46.849Z,1478853766.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:47.221Z,1478853767.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:47.247Z,1478853767.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:47.618Z,1478853767.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:47.638Z,1478853767.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:48.023Z,1478853768.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:48.039Z,1478853768.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:48.421Z,1478853768.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:48.436Z,1478853768.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:48.823Z,1478853768.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:48.855Z,1478853768.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:49.215Z,1478853769.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:49.292Z,1478853769.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:49.618Z,1478853769.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:49.649Z,1478853769.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:50.024Z,1478853770.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:50.054Z,1478853770.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:50.433Z,1478853770.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:50.458Z,1478853770.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:50.815Z,1478853770.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:50.861Z,1478853770.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:51.215Z,1478853771.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:51.251Z,1478853771.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:51.619Z,1478853771.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:51.667Z,1478853771.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:52.035Z,1478853772.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:52.092Z,1478853772.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:52.426Z,1478853772.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:52.470Z,1478853772.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:52.847Z,1478853772.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:52.883Z,1478853772.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:53.225Z,1478853773.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:53.249Z,1478853773.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:53.620Z,1478853773.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:53.659Z,1478853773.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:54.019Z,1478853774.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:54.077Z,1478853774.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:54.425Z,1478853774.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:54.445Z,1478853774.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:54.830Z,1478853774.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:54.854Z,1478853774.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:55.224Z,1478853775.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:55.252Z,1478853775.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:55.616Z,1478853775.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:55.661Z,1478853775.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:56.019Z,1478853776.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:56.063Z,1478853776.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:56.430Z,1478853776.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:56.470Z,1478853776.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:56.832Z,1478853776.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:56.920Z,1478853776.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:57.213Z,1478853777.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:57.249Z,1478853777.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:57.629Z,1478853777.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:57.649Z,1478853777.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:58.013Z,1478853778.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:58.076Z,1478853778.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:58.413Z,1478853778.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:58.453Z,1478853778.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:58.817Z,1478853778.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:58.869Z,1478853778.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:59.222Z,1478853779.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:59.258Z,1478853779.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:42:59.628Z,1478853779.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:42:59.681Z,1478853779.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:00.021Z,1478853780.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:00.073Z,1478853780.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:00.432Z,1478853780.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:00.459Z,1478853780.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:00.839Z,1478853780.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:00.878Z,1478853780.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:01.232Z,1478853781.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:01.248Z,1478853781.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:01.627Z,1478853781.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:01.653Z,1478853781.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:02.037Z,1478853782.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:02.060Z,1478853782.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:02.433Z,1478853782.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:02.458Z,1478853782.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:02.839Z,1478853782.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:02.869Z,1478853782.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:03.227Z,1478853783.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:03.262Z,1478853783.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:03.614Z,1478853783.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:03.666Z,1478853783.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:04.014Z,1478853784.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:04.045Z,1478853784.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:04.423Z,1478853784.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:04.484Z,1478853784.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:04.823Z,1478853784.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:04.847Z,1478853784.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:05.214Z,1478853785.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:05.265Z,1478853785.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:05.615Z,1478853785.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:05.670Z,1478853785.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:06.014Z,1478853786.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:06.058Z,1478853786.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:06.424Z,1478853786.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:06.479Z,1478853786.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:06.838Z,1478853786.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:06.861Z,1478853786.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:07.225Z,1478853787.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:07.259Z,1478853787.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:07.630Z,1478853787.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:07.673Z,1478853787.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:08.025Z,1478853788.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:08.070Z,1478853788.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:08.419Z,1478853788.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:08.451Z,1478853788.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:08.822Z,1478853788.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:08.850Z,1478853788.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:09.214Z,1478853789.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:09.249Z,1478853789.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:09.616Z,1478853789.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:09.660Z,1478853789.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:13.562Z,1478853793.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:13.640Z,1478853793.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:13.761Z,1478853793.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:13.785Z,1478853793.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:14.129Z,1478853794.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:14.159Z,1478853794.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:14.535Z,1478853794.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:14.591Z,1478853794.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:14.911Z,1478853794.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:14.943Z,1478853794.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:15.311Z,1478853795.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:15.365Z,1478853795.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:15.710Z,1478853795.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:15.770Z,1478853795.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:16.113Z,1478853796.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:16.140Z,1478853796.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:16.520Z,1478853796.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:16.535Z,1478853796.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:16.920Z,1478853796.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:16.935Z,1478853796.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:17.312Z,1478853797.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:17.338Z,1478853797.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:17.720Z,1478853797.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:17.745Z,1478853797.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:18.120Z,1478853798.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:18.135Z,1478853798.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:18.531Z,1478853798.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:18.546Z,1478853798.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:18.929Z,1478853798.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:18.945Z,1478853798.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:19.335Z,1478853799.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:19.349Z,1478853799.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:19.724Z,1478853799.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:19.758Z,1478853799.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:20.110Z,1478853800.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:20.148Z,1478853800.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:20.509Z,1478853800.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:20.549Z,1478853800.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:20.911Z,1478853800.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:20.919Z,1478853800.919 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T08:43:20.951Z,1478853800.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:21.311Z,1478853801.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:21.344Z,1478853801.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:21.711Z,1478853801.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:21.753Z,1478853801.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:22.109Z,1478853802.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:22.152Z,1478853802.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:22.513Z,1478853802.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:22.520Z,1478853802.520 [PNI_TCM](ERROR): CRC does not match. Expected:0x62025 got:0x49013
2016-11-11T08:43:22.553Z,1478853802.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:22.912Z,1478853802.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:22.927Z,1478853802.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:23.313Z,1478853803.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:23.333Z,1478853803.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:23.725Z,1478853803.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:23.759Z,1478853803.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:24.124Z,1478853804.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:24.152Z,1478853804.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:24.512Z,1478853804.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:24.539Z,1478853804.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:24.909Z,1478853804.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:24.949Z,1478853804.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:25.317Z,1478853805.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:25.344Z,1478853805.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:25.711Z,1478853805.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:25.745Z,1478853805.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:26.111Z,1478853806.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:26.169Z,1478853806.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:26.542Z,1478853806.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:26.558Z,1478853806.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:26.925Z,1478853806.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:26.957Z,1478853806.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:27.318Z,1478853807.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:27.333Z,1478853807.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:27.717Z,1478853807.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:27.737Z,1478853807.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:28.116Z,1478853808.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:28.131Z,1478853808.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:28.519Z,1478853808.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:28.534Z,1478853808.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:28.926Z,1478853808.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:28.949Z,1478853808.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:29.312Z,1478853809.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:29.336Z,1478853809.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:29.716Z,1478853809.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:29.737Z,1478853809.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:30.112Z,1478853810.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:30.147Z,1478853810.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:30.512Z,1478853810.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:30.545Z,1478853810.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:30.909Z,1478853810.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:30.927Z,1478853810.927 [BPC1](ERROR): Failed to receive battery data
2016-11-11T08:43:30.928Z,1478853810.928 [BPC1] Communications Fault, FailCount= 1
2016-11-11T08:43:30.928Z,1478853810.928 [BPC1](ERROR): Communications Fault
2016-11-11T08:43:30.960Z,1478853810.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:31.002Z,1478853811.003 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T08:43:31.310Z,1478853811.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:31.340Z,1478853811.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:31.711Z,1478853811.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:31.745Z,1478853811.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:32.111Z,1478853812.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:32.160Z,1478853812.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:32.215Z,1478853812.215 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:43:32.215Z,1478853812.215 [BPC1] No Fault, FailCount= 1
2016-11-11T08:43:32.520Z,1478853812.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:32.601Z,1478853812.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:32.916Z,1478853812.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:32.973Z,1478853812.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:33.310Z,1478853813.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:33.343Z,1478853813.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:33.711Z,1478853813.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:33.737Z,1478853813.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:34.109Z,1478853814.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:34.135Z,1478853814.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:34.524Z,1478853814.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:34.539Z,1478853814.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:34.916Z,1478853814.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:34.948Z,1478853814.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:35.329Z,1478853815.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:35.350Z,1478853815.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:35.728Z,1478853815.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:35.748Z,1478853815.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:36.114Z,1478853816.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:36.141Z,1478853816.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:36.512Z,1478853816.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:36.549Z,1478853816.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:36.916Z,1478853816.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:36.930Z,1478853816.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:37.312Z,1478853817.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:37.345Z,1478853817.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:37.717Z,1478853817.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:37.737Z,1478853817.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:38.119Z,1478853818.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:38.141Z,1478853818.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:38.522Z,1478853818.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:38.538Z,1478853818.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:38.909Z,1478853818.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:38.942Z,1478853818.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:39.309Z,1478853819.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:39.344Z,1478853819.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:39.728Z,1478853819.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:39.754Z,1478853819.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:40.124Z,1478853820.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:40.155Z,1478853820.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:40.510Z,1478853820.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:40.554Z,1478853820.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:40.910Z,1478853820.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:40.938Z,1478853820.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:41.310Z,1478853821.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:41.350Z,1478853821.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:41.714Z,1478853821.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:41.749Z,1478853821.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:42.110Z,1478853822.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:42.125Z,1478853822.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:42.515Z,1478853822.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:42.541Z,1478853822.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:42.913Z,1478853822.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:42.941Z,1478853822.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:43.313Z,1478853823.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:43.345Z,1478853823.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:43.709Z,1478853823.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:43.741Z,1478853823.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:44.131Z,1478853824.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:44.178Z,1478853824.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:44.537Z,1478853824.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:44.595Z,1478853824.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:44.924Z,1478853824.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:44.977Z,1478853824.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:45.319Z,1478853825.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:45.354Z,1478853825.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:45.716Z,1478853825.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:45.761Z,1478853825.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:46.113Z,1478853826.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:46.133Z,1478853826.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:46.516Z,1478853826.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:46.566Z,1478853826.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:46.917Z,1478853826.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:46.973Z,1478853826.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:47.317Z,1478853827.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:47.332Z,1478853827.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:47.716Z,1478853827.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:47.731Z,1478853827.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:48.117Z,1478853828.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:48.132Z,1478853828.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:48.512Z,1478853828.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:48.530Z,1478853828.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:48.916Z,1478853828.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:48.943Z,1478853828.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:49.331Z,1478853829.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:49.346Z,1478853829.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:49.724Z,1478853829.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:49.752Z,1478853829.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:50.109Z,1478853830.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:50.143Z,1478853830.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:50.510Z,1478853830.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:50.535Z,1478853830.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:50.909Z,1478853830.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:50.935Z,1478853830.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:51.317Z,1478853831.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:51.349Z,1478853831.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:51.710Z,1478853831.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:51.748Z,1478853831.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:52.109Z,1478853832.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:52.145Z,1478853832.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:52.509Z,1478853832.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:52.544Z,1478853832.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:52.910Z,1478853832.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:52.937Z,1478853832.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:53.317Z,1478853833.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:53.352Z,1478853833.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:53.743Z,1478853833.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:53.765Z,1478853833.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:54.114Z,1478853834.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:54.145Z,1478853834.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:54.517Z,1478853834.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:54.533Z,1478853834.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:54.916Z,1478853834.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:54.932Z,1478853834.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:55.316Z,1478853835.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:55.331Z,1478853835.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:55.712Z,1478853835.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:55.745Z,1478853835.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:56.113Z,1478853836.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:56.134Z,1478853836.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:56.522Z,1478853836.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:56.537Z,1478853836.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:56.912Z,1478853836.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:56.944Z,1478853836.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:57.309Z,1478853837.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:57.390Z,1478853837.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:57.731Z,1478853837.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:57.758Z,1478853837.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:58.124Z,1478853838.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:58.154Z,1478853838.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:58.517Z,1478853838.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:58.553Z,1478853838.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:58.909Z,1478853838.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:58.972Z,1478853838.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:59.309Z,1478853839.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:59.349Z,1478853839.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:43:59.709Z,1478853839.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:43:59.729Z,1478853839.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:00.116Z,1478853840.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:00.162Z,1478853840.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:00.512Z,1478853840.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:00.527Z,1478853840.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:00.909Z,1478853840.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:00.960Z,1478853840.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:01.309Z,1478853841.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:01.361Z,1478853841.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:01.713Z,1478853841.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:01.733Z,1478853841.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:02.123Z,1478853842.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:02.159Z,1478853842.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:02.524Z,1478853842.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:02.560Z,1478853842.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:02.917Z,1478853842.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:02.963Z,1478853842.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:03.315Z,1478853843.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:03.337Z,1478853843.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:03.718Z,1478853843.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:03.732Z,1478853843.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:04.112Z,1478853844.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:04.142Z,1478853844.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:04.516Z,1478853844.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:04.531Z,1478853844.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:04.917Z,1478853844.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:04.932Z,1478853844.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:05.312Z,1478853845.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:05.340Z,1478853845.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:05.716Z,1478853845.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:05.737Z,1478853845.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:06.117Z,1478853846.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:06.132Z,1478853846.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:06.530Z,1478853846.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:06.549Z,1478853846.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:06.909Z,1478853846.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:06.934Z,1478853846.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:07.309Z,1478853847.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:07.344Z,1478853847.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:07.709Z,1478853847.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:07.741Z,1478853847.741 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:07.741Z,1478853847.741 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2016-11-11T08:44:07.741Z,1478853847.741 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:44:07.748Z,1478853847.748 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:07.748Z,1478853847.748 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 59
2016-11-11T08:44:07.748Z,1478853847.748 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:44:07.750Z,1478853847.750 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:07.750Z,1478853847.750 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 59
2016-11-11T08:44:07.750Z,1478853847.750 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:44:07.772Z,1478853847.772 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:44:07.773Z,1478853847.773 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:44:07.773Z,1478853847.773 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:44:08.121Z,1478853848.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:08.159Z,1478853848.159 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:44:08.159Z,1478853848.159 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2016-11-11T08:44:08.160Z,1478853848.160 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:44:08.160Z,1478853848.160 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 59
2016-11-11T08:44:08.161Z,1478853848.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:44:08.161Z,1478853848.161 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 59
2016-11-11T08:44:08.509Z,1478853848.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:08.544Z,1478853848.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:44:08.544Z,1478853848.544 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:44:08.544Z,1478853848.545 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:44:08.557Z,1478853848.557 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:44:08.558Z,1478853848.558 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:44:08.558Z,1478853848.558 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:44:08.559Z,1478853848.559 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:44:08.559Z,1478853848.559 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:44:08.559Z,1478853848.559 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:44:08.909Z,1478853848.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:08.953Z,1478853848.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:44:08.955Z,1478853848.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:09.309Z,1478853849.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:09.329Z,1478853849.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:44:09.330Z,1478853849.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:09.713Z,1478853849.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:09.728Z,1478853849.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:44:09.729Z,1478853849.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:13.007Z,1478853853.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:13.057Z,1478853853.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2016-11-11T08:44:13.058Z,1478853853.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:13.171Z,1478853853.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:13.221Z,1478853853.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2016-11-11T08:44:13.222Z,1478853853.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:13.539Z,1478853853.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:13.582Z,1478853853.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2016-11-11T08:44:13.583Z,1478853853.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:13.944Z,1478853853.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:13.973Z,1478853853.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2016-11-11T08:44:13.974Z,1478853853.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:14.348Z,1478853854.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:14.373Z,1478853854.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2016-11-11T08:44:14.374Z,1478853854.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:14.764Z,1478853854.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:14.820Z,1478853854.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2016-11-11T08:44:14.821Z,1478853854.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:15.137Z,1478853855.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:15.162Z,1478853855.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2016-11-11T08:44:15.164Z,1478853855.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:15.539Z,1478853855.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:15.589Z,1478853855.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2016-11-11T08:44:15.590Z,1478853855.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:15.935Z,1478853855.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:15.981Z,1478853855.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2016-11-11T08:44:15.982Z,1478853855.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:16.334Z,1478853856.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:16.357Z,1478853856.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2016-11-11T08:44:16.358Z,1478853856.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:16.736Z,1478853856.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:16.764Z,1478853856.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2016-11-11T08:44:16.765Z,1478853856.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:17.140Z,1478853857.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:17.166Z,1478853857.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2016-11-11T08:44:17.167Z,1478853857.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:17.532Z,1478853857.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:17.565Z,1478853857.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2016-11-11T08:44:17.566Z,1478853857.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:17.931Z,1478853857.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:17.968Z,1478853857.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2016-11-11T08:44:17.970Z,1478853857.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:18.331Z,1478853858.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:18.354Z,1478853858.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2016-11-11T08:44:18.355Z,1478853858.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:18.732Z,1478853858.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:18.769Z,1478853858.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2016-11-11T08:44:18.770Z,1478853858.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:19.131Z,1478853859.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:19.169Z,1478853859.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2016-11-11T08:44:19.170Z,1478853859.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:19.531Z,1478853859.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:19.546Z,1478853859.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2016-11-11T08:44:19.547Z,1478853859.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:19.936Z,1478853859.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:19.955Z,1478853859.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2016-11-11T08:44:19.960Z,1478853859.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:20.338Z,1478853860.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:20.353Z,1478853860.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2016-11-11T08:44:20.354Z,1478853860.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:20.740Z,1478853860.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:20.754Z,1478853860.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2016-11-11T08:44:20.755Z,1478853860.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:21.133Z,1478853861.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:21.156Z,1478853861.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2016-11-11T08:44:21.157Z,1478853861.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:21.531Z,1478853861.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:21.565Z,1478853861.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2016-11-11T08:44:21.566Z,1478853861.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:21.941Z,1478853861.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:21.955Z,1478853861.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2016-11-11T08:44:21.956Z,1478853861.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:22.331Z,1478853862.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:22.365Z,1478853862.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2016-11-11T08:44:22.366Z,1478853862.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:22.714Z,1478853862.714 [NAL9602](INFO): SBD MO Status=0, MOMSN=340, MT Status=0, MTMSN=0
2016-11-11T08:44:22.714Z,1478853862.714 [NAL9602](INFO): No messages in MT queue
2016-11-11T08:44:22.733Z,1478853862.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:22.776Z,1478853862.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2016-11-11T08:44:22.777Z,1478853862.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:23.139Z,1478853863.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:23.153Z,1478853863.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2016-11-11T08:44:23.154Z,1478853863.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:23.544Z,1478853863.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:23.559Z,1478853863.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2016-11-11T08:44:23.580Z,1478853863.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:23.948Z,1478853863.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:23.983Z,1478853863.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2016-11-11T08:44:23.984Z,1478853863.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:24.352Z,1478853864.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:24.384Z,1478853864.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2016-11-11T08:44:24.385Z,1478853864.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:24.739Z,1478853864.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:24.777Z,1478853864.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2016-11-11T08:44:24.778Z,1478853864.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:25.140Z,1478853865.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:25.154Z,1478853865.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2016-11-11T08:44:25.155Z,1478853865.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:25.547Z,1478853865.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:25.561Z,1478853865.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2016-11-11T08:44:25.562Z,1478853865.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:25.950Z,1478853865.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:25.977Z,1478853865.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2016-11-11T08:44:25.978Z,1478853865.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:26.344Z,1478853866.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:26.377Z,1478853866.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2016-11-11T08:44:26.378Z,1478853866.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:26.744Z,1478853866.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:26.795Z,1478853866.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2016-11-11T08:44:26.796Z,1478853866.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:27.138Z,1478853867.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:27.152Z,1478853867.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2016-11-11T08:44:27.153Z,1478853867.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:27.538Z,1478853867.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:27.561Z,1478853867.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2016-11-11T08:44:27.562Z,1478853867.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:27.941Z,1478853867.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:27.997Z,1478853867.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:28.340Z,1478853868.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:28.363Z,1478853868.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:28.748Z,1478853868.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:28.802Z,1478853868.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:29.154Z,1478853869.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:29.169Z,1478853869.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:29.562Z,1478853869.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:29.615Z,1478853869.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:29.959Z,1478853869.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:30.022Z,1478853870.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:30.330Z,1478853870.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:30.366Z,1478853870.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:30.739Z,1478853870.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:30.766Z,1478853870.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:31.151Z,1478853871.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:31.175Z,1478853871.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:31.563Z,1478853871.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:31.601Z,1478853871.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:31.942Z,1478853871.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:31.965Z,1478853871.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:32.351Z,1478853872.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:32.366Z,1478853872.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:32.752Z,1478853872.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:32.773Z,1478853872.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:33.143Z,1478853873.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:33.161Z,1478853873.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:33.538Z,1478853873.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:33.575Z,1478853873.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:33.932Z,1478853873.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:33.966Z,1478853873.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:34.333Z,1478853874.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:34.373Z,1478853874.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:34.731Z,1478853874.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:34.746Z,1478853874.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:35.144Z,1478853875.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:35.158Z,1478853875.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:35.553Z,1478853875.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:35.585Z,1478853875.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:35.944Z,1478853875.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:35.959Z,1478853875.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:36.340Z,1478853876.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:36.355Z,1478853876.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:36.738Z,1478853876.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:36.762Z,1478853876.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:37.141Z,1478853877.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:37.161Z,1478853877.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:37.539Z,1478853877.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:37.568Z,1478853877.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:37.944Z,1478853877.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:37.972Z,1478853877.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:38.348Z,1478853878.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:38.374Z,1478853878.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:38.752Z,1478853878.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:38.767Z,1478853878.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:39.135Z,1478853879.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:39.169Z,1478853879.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:39.532Z,1478853879.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:39.547Z,1478853879.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:39.936Z,1478853879.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:39.976Z,1478853879.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:40.341Z,1478853880.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:40.396Z,1478853880.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:40.747Z,1478853880.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:40.769Z,1478853880.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:41.153Z,1478853881.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:41.197Z,1478853881.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:41.549Z,1478853881.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:41.570Z,1478853881.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:41.944Z,1478853881.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:41.967Z,1478853881.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:42.347Z,1478853882.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:42.387Z,1478853882.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:42.764Z,1478853882.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:42.802Z,1478853882.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:43.144Z,1478853883.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:43.217Z,1478853883.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:43.533Z,1478853883.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:43.572Z,1478853883.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:43.941Z,1478853883.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:44.009Z,1478853884.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:44.356Z,1478853884.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:44.412Z,1478853884.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:44.744Z,1478853884.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:44.777Z,1478853884.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:45.132Z,1478853885.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:45.166Z,1478853885.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:45.536Z,1478853885.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:45.565Z,1478853885.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:45.947Z,1478853885.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:45.964Z,1478853885.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:46.343Z,1478853886.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:46.376Z,1478853886.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:46.760Z,1478853886.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:46.801Z,1478853886.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:47.152Z,1478853887.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:47.176Z,1478853887.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:47.549Z,1478853887.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:47.575Z,1478853887.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:47.974Z,1478853887.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:47.989Z,1478853887.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:48.367Z,1478853888.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:48.409Z,1478853888.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:48.745Z,1478853888.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:48.760Z,1478853888.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:49.138Z,1478853889.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:49.166Z,1478853889.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:49.541Z,1478853889.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:49.572Z,1478853889.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:49.944Z,1478853889.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:49.972Z,1478853889.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:50.355Z,1478853890.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:50.374Z,1478853890.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:50.752Z,1478853890.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:50.771Z,1478853890.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:51.135Z,1478853891.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:51.171Z,1478853891.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:51.535Z,1478853891.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:51.567Z,1478853891.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:51.936Z,1478853891.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:51.965Z,1478853891.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:52.343Z,1478853892.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:52.366Z,1478853892.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:52.734Z,1478853892.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:52.762Z,1478853892.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:53.152Z,1478853893.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:53.167Z,1478853893.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:53.549Z,1478853893.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:53.578Z,1478853893.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:53.940Z,1478853893.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:53.965Z,1478853893.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:54.340Z,1478853894.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:54.377Z,1478853894.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:54.736Z,1478853894.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:54.765Z,1478853894.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:55.137Z,1478853895.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:55.185Z,1478853895.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:55.536Z,1478853895.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:55.567Z,1478853895.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:55.947Z,1478853895.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:56.005Z,1478853896.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:56.355Z,1478853896.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:56.397Z,1478853896.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:56.752Z,1478853896.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:56.771Z,1478853896.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:57.135Z,1478853897.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:57.204Z,1478853897.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:57.536Z,1478853897.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:57.573Z,1478853897.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:57.932Z,1478853897.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:57.993Z,1478853897.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:58.333Z,1478853898.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:58.385Z,1478853898.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:58.732Z,1478853898.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:58.771Z,1478853898.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:59.143Z,1478853899.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:59.178Z,1478853899.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:59.552Z,1478853899.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:59.593Z,1478853899.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:44:59.958Z,1478853899.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:44:59.983Z,1478853899.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:00.337Z,1478853900.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:00.369Z,1478853900.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:00.740Z,1478853900.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:00.747Z,1478853900.747 [PNI_TCM](ERROR): CRC does not match. Expected:0x27035 got:0x7490
2016-11-11T08:45:00.766Z,1478853900.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:01.139Z,1478853901.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:01.177Z,1478853901.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:01.545Z,1478853901.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:01.564Z,1478853901.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:01.947Z,1478853901.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:01.978Z,1478853901.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:02.357Z,1478853902.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:02.372Z,1478853902.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:02.752Z,1478853902.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:02.778Z,1478853902.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:03.140Z,1478853903.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:03.156Z,1478853903.156 [PNI_TCM](ERROR): CRC does not match. Expected:0x23424 got:0x16474
2016-11-11T08:45:03.174Z,1478853903.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:03.557Z,1478853903.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:03.585Z,1478853903.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:03.933Z,1478853903.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:03.966Z,1478853903.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:04.340Z,1478853904.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:04.373Z,1478853904.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:04.748Z,1478853904.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:04.774Z,1478853904.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:05.192Z,1478853905.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:05.231Z,1478853905.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:05.547Z,1478853905.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:05.585Z,1478853905.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:05.944Z,1478853905.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:05.979Z,1478853905.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:06.336Z,1478853906.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:06.351Z,1478853906.351 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T08:45:06.370Z,1478853906.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:06.737Z,1478853906.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:06.765Z,1478853906.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:07.144Z,1478853907.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:07.173Z,1478853907.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:07.540Z,1478853907.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:07.573Z,1478853907.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:07.945Z,1478853907.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:07.968Z,1478853907.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:08.352Z,1478853908.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:08.380Z,1478853908.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:08.752Z,1478853908.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:08.800Z,1478853908.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:08.816Z,1478853908.816 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T08:40:08.5Z
2016-11-11T08:45:08.816Z,1478853908.816 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T08:45:08.816Z,1478853908.816 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T08:45:09.136Z,1478853909.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:09.169Z,1478853909.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:09.986Z,1478853909.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:10.001Z,1478853910.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:10.101Z,1478853910.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:10.129Z,1478853910.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:13.398Z,1478853913.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:13.458Z,1478853913.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:13.512Z,1478853913.513 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0092.lzma
2016-11-11T08:45:13.562Z,1478853913.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:13.590Z,1478853913.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:13.923Z,1478853913.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:13.961Z,1478853913.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:14.301Z,1478853914.301 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0092.lzma.bak
2016-11-11T08:45:14.301Z,1478853914.301 [DataOverHttps](INFO): SBD MOMSN=4555240
2016-11-11T08:45:14.333Z,1478853914.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:14.397Z,1478853914.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:15.568Z,1478853915.568 [NAL9602](INFO): Powering down
2016-11-11T08:45:15.608Z,1478853915.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:15.645Z,1478853915.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:15.732Z,1478853915.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:15.789Z,1478853915.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:19.204Z,1478853919.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:19.259Z,1478853919.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:19.353Z,1478853919.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:19.385Z,1478853919.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:19.713Z,1478853919.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:19.727Z,1478853919.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:20.109Z,1478853920.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:20.137Z,1478853920.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:20.521Z,1478853920.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:20.541Z,1478853920.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:20.917Z,1478853920.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:20.937Z,1478853920.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:24.229Z,1478853924.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:24.244Z,1478853924.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:24.312Z,1478853924.312 [DataOverHttps](INFO): Sending 319 bytes from file Logs/20161111T044527/Express0093.lzma
2016-11-11T08:45:24.361Z,1478853924.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:24.381Z,1478853924.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:24.742Z,1478853924.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:24.757Z,1478853924.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:25.116Z,1478853925.116 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0093.lzma.bak
2016-11-11T08:45:25.116Z,1478853925.116 [DataOverHttps](INFO): SBD MOMSN=4555242
2016-11-11T08:45:25.151Z,1478853925.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:25.182Z,1478853925.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:26.418Z,1478853926.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:26.433Z,1478853926.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:26.462Z,1478853926.462 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T08:45:26.463Z,1478853926.463 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T08:45:26.463Z,1478853926.463 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T08:45:26.529Z,1478853926.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:26.569Z,1478853926.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:29.786Z,1478853929.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:29.830Z,1478853929.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:29.948Z,1478853929.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:29.978Z,1478853929.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:30.322Z,1478853930.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:30.337Z,1478853930.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:30.709Z,1478853930.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:30.745Z,1478853930.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:31.109Z,1478853931.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:31.145Z,1478853931.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:31.512Z,1478853931.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:31.573Z,1478853931.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:31.913Z,1478853931.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:31.961Z,1478853931.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:32.309Z,1478853932.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:32.331Z,1478853932.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:32.712Z,1478853932.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:32.785Z,1478853932.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:33.132Z,1478853933.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:33.165Z,1478853933.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:33.512Z,1478853933.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:33.562Z,1478853933.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:33.924Z,1478853933.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:33.966Z,1478853933.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:34.316Z,1478853934.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:34.338Z,1478853934.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:34.713Z,1478853934.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:34.736Z,1478853934.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:35.109Z,1478853935.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:35.127Z,1478853935.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:35.513Z,1478853935.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:35.541Z,1478853935.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:35.909Z,1478853935.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:35.935Z,1478853935.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:36.313Z,1478853936.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:36.388Z,1478853936.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:36.709Z,1478853936.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:36.726Z,1478853936.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:37.113Z,1478853937.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:37.138Z,1478853937.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:37.509Z,1478853937.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:37.538Z,1478853937.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:37.913Z,1478853937.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:37.961Z,1478853937.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:38.309Z,1478853938.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:38.333Z,1478853938.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:38.712Z,1478853938.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:38.733Z,1478853938.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:39.109Z,1478853939.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:39.150Z,1478853939.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:39.513Z,1478853939.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:39.530Z,1478853939.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:39.910Z,1478853939.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:39.929Z,1478853939.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:40.306Z,1478853940.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:40.322Z,1478853940.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:40.713Z,1478853940.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:40.797Z,1478853940.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:41.113Z,1478853941.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:41.130Z,1478853941.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:41.513Z,1478853941.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:41.530Z,1478853941.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:41.909Z,1478853941.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:41.926Z,1478853941.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:42.313Z,1478853942.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:42.330Z,1478853942.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:42.709Z,1478853942.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:42.727Z,1478853942.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:43.113Z,1478853943.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:43.130Z,1478853943.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:43.541Z,1478853943.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:43.556Z,1478853943.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:43.913Z,1478853943.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:43.930Z,1478853943.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:44.313Z,1478853944.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:44.359Z,1478853944.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:44.713Z,1478853944.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:44.730Z,1478853944.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:45.113Z,1478853945.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:45.130Z,1478853945.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:45.509Z,1478853945.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:45.526Z,1478853945.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:45.913Z,1478853945.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:45.930Z,1478853945.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:46.309Z,1478853946.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:46.352Z,1478853946.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:46.713Z,1478853946.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:46.730Z,1478853946.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:47.109Z,1478853947.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:47.157Z,1478853947.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:47.513Z,1478853947.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:47.529Z,1478853947.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:47.909Z,1478853947.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:47.957Z,1478853947.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:48.313Z,1478853948.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:48.361Z,1478853948.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:48.714Z,1478853948.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:48.735Z,1478853948.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:49.113Z,1478853949.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:49.173Z,1478853949.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:49.528Z,1478853949.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:49.582Z,1478853949.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:49.913Z,1478853949.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:49.929Z,1478853949.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:50.313Z,1478853950.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:50.333Z,1478853950.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:50.709Z,1478853950.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:50.729Z,1478853950.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:51.113Z,1478853951.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:51.135Z,1478853951.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:51.509Z,1478853951.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:51.526Z,1478853951.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:51.913Z,1478853951.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:51.930Z,1478853951.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:52.335Z,1478853952.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:52.399Z,1478853952.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:52.427Z,1478853952.427 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T08:45:52.713Z,1478853952.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:52.739Z,1478853952.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:53.113Z,1478853953.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:53.161Z,1478853953.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:53.509Z,1478853953.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:53.526Z,1478853953.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:53.913Z,1478853953.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:53.938Z,1478853953.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:54.309Z,1478853954.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:54.338Z,1478853954.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:54.713Z,1478853954.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:54.777Z,1478853954.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:55.108Z,1478853955.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:55.137Z,1478853955.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:55.510Z,1478853955.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:55.532Z,1478853955.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:55.910Z,1478853955.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:55.941Z,1478853955.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:56.310Z,1478853956.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:56.332Z,1478853956.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:56.718Z,1478853956.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:56.753Z,1478853956.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:57.110Z,1478853957.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:57.133Z,1478853957.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:57.518Z,1478853957.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:57.540Z,1478853957.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:57.909Z,1478853957.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:57.937Z,1478853957.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:58.317Z,1478853958.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:58.335Z,1478853958.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:58.709Z,1478853958.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:58.734Z,1478853958.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:59.109Z,1478853959.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:59.134Z,1478853959.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:59.522Z,1478853959.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:59.538Z,1478853959.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:45:59.916Z,1478853959.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:45:59.934Z,1478853959.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:00.316Z,1478853960.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:00.393Z,1478853960.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:00.716Z,1478853960.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:00.733Z,1478853960.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:01.115Z,1478853961.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:01.169Z,1478853961.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:01.516Z,1478853961.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:01.533Z,1478853961.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:01.917Z,1478853961.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:01.959Z,1478853961.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:02.309Z,1478853962.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:02.374Z,1478853962.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:02.709Z,1478853962.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:02.741Z,1478853962.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:03.109Z,1478853963.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:03.143Z,1478853963.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:03.509Z,1478853963.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:03.536Z,1478853963.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:03.909Z,1478853963.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:03.951Z,1478853963.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:04.309Z,1478853964.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:04.327Z,1478853964.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:04.709Z,1478853964.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:04.726Z,1478853964.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:05.109Z,1478853965.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:05.125Z,1478853965.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:05.509Z,1478853965.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:05.531Z,1478853965.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:05.915Z,1478853965.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:05.972Z,1478853965.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:06.309Z,1478853966.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:06.341Z,1478853966.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:06.716Z,1478853966.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:06.734Z,1478853966.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:07.116Z,1478853967.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:07.141Z,1478853967.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:07.517Z,1478853967.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:07.536Z,1478853967.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:07.916Z,1478853967.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:07.945Z,1478853967.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:08.309Z,1478853968.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:08.338Z,1478853968.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:08.709Z,1478853968.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:08.737Z,1478853968.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:09.109Z,1478853969.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:09.149Z,1478853969.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:09.509Z,1478853969.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:09.547Z,1478853969.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:09.912Z,1478853969.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:09.976Z,1478853969.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:10.316Z,1478853970.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:10.332Z,1478853970.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:10.715Z,1478853970.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:10.740Z,1478853970.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:11.116Z,1478853971.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:11.144Z,1478853971.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:11.512Z,1478853971.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:11.585Z,1478853971.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:11.913Z,1478853971.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:11.948Z,1478853971.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:12.309Z,1478853972.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:12.327Z,1478853972.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:12.713Z,1478853972.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:12.754Z,1478853972.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:13.109Z,1478853973.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:13.127Z,1478853973.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:13.512Z,1478853973.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:13.537Z,1478853973.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:13.909Z,1478853973.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:13.927Z,1478853973.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:14.316Z,1478853974.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:14.389Z,1478853974.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:14.715Z,1478853974.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:14.731Z,1478853974.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:15.121Z,1478853975.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:15.172Z,1478853975.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:15.516Z,1478853975.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:15.533Z,1478853975.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:15.916Z,1478853975.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:15.974Z,1478853975.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:16.316Z,1478853976.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:16.371Z,1478853976.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:16.716Z,1478853976.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:16.733Z,1478853976.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:17.117Z,1478853977.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:17.141Z,1478853977.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:17.509Z,1478853977.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:17.544Z,1478853977.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:17.909Z,1478853977.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:17.944Z,1478853977.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:18.322Z,1478853978.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:18.341Z,1478853978.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:18.709Z,1478853978.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:18.744Z,1478853978.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:19.109Z,1478853979.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:19.145Z,1478853979.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:19.509Z,1478853979.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:19.547Z,1478853979.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:19.909Z,1478853979.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:19.948Z,1478853979.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:20.314Z,1478853980.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:20.340Z,1478853980.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:20.709Z,1478853980.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:20.727Z,1478853980.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:21.113Z,1478853981.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:21.130Z,1478853981.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:21.512Z,1478853981.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:21.529Z,1478853981.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:21.915Z,1478853981.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:21.937Z,1478853981.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:22.313Z,1478853982.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:22.340Z,1478853982.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:22.716Z,1478853982.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:22.771Z,1478853982.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:23.109Z,1478853983.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:23.161Z,1478853983.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:23.513Z,1478853983.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:23.545Z,1478853983.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:23.909Z,1478853983.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:23.944Z,1478853983.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:24.309Z,1478853984.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:24.328Z,1478853984.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:24.714Z,1478853984.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:24.745Z,1478853984.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:25.115Z,1478853985.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:25.132Z,1478853985.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:25.516Z,1478853985.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:25.542Z,1478853985.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:25.915Z,1478853985.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:25.940Z,1478853985.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:26.315Z,1478853986.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:26.354Z,1478853986.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:26.717Z,1478853986.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:26.783Z,1478853986.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:27.114Z,1478853987.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:27.137Z,1478853987.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:30.467Z,1478853990.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:30.541Z,1478853990.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:30.632Z,1478853990.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:30.661Z,1478853990.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:31.010Z,1478853991.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:31.045Z,1478853991.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:31.413Z,1478853991.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:31.465Z,1478853991.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:31.809Z,1478853991.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:31.844Z,1478853991.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:32.211Z,1478853992.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:32.254Z,1478853992.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:32.610Z,1478853992.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:32.657Z,1478853992.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:33.009Z,1478853993.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:33.052Z,1478853993.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:33.409Z,1478853993.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:33.449Z,1478853993.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:33.816Z,1478853993.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:33.831Z,1478853993.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:34.216Z,1478853994.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:34.231Z,1478853994.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:34.615Z,1478853994.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:34.637Z,1478853994.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:35.016Z,1478853995.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:35.032Z,1478853995.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:35.418Z,1478853995.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:35.433Z,1478853995.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:35.817Z,1478853995.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:35.837Z,1478853995.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:36.216Z,1478853996.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:36.231Z,1478853996.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:36.609Z,1478853996.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:36.642Z,1478853996.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:37.010Z,1478853997.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:37.044Z,1478853997.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:37.409Z,1478853997.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:37.440Z,1478853997.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:37.809Z,1478853997.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:37.845Z,1478853997.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:38.209Z,1478853998.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:38.244Z,1478853998.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:38.610Z,1478853998.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:38.633Z,1478853998.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:39.009Z,1478853999.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:39.029Z,1478853999.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:39.409Z,1478853999.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:39.429Z,1478853999.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:39.809Z,1478853999.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:39.829Z,1478853999.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:40.214Z,1478854000.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:40.229Z,1478854000.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:40.615Z,1478854000.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:40.629Z,1478854000.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:41.016Z,1478854001.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:41.032Z,1478854001.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:41.415Z,1478854001.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:41.437Z,1478854001.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:41.497Z,1478854001.497 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T08:46:41.497Z,1478854001.497 [Rowe_600LCM] No Fault, FailCount= 5
2016-11-11T08:46:41.816Z,1478854001.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:41.837Z,1478854001.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:41.879Z,1478854001.879 [Rowe_600LCM](INFO): Initializing
2016-11-11T08:46:41.880Z,1478854001.880 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T08:46:41.880Z,1478854001.880 [Rowe_600LCM](INFO): LCM OK
2016-11-11T08:46:41.880Z,1478854001.880 [Rowe_600LCM](INFO): Powering up
2016-11-11T08:46:42.216Z,1478854002.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:42.232Z,1478854002.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:42.617Z,1478854002.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:42.637Z,1478854002.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:43.016Z,1478854003.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:43.031Z,1478854003.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:43.409Z,1478854003.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:43.434Z,1478854003.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:43.820Z,1478854003.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:43.841Z,1478854003.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:44.224Z,1478854004.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:44.253Z,1478854004.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:44.609Z,1478854004.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:44.669Z,1478854004.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:45.009Z,1478854005.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:45.071Z,1478854005.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:45.409Z,1478854005.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:45.429Z,1478854005.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:45.812Z,1478854005.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:45.828Z,1478854005.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:46.017Z,1478854006.017 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T08:46:46.082Z,1478854006.082 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T08:46:46.083Z,1478854006.083 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T08:46:46.084Z,1478854006.085 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T08:46:46.085Z,1478854006.085 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T08:46:46.215Z,1478854006.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:46.267Z,1478854006.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:46.617Z,1478854006.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:46.668Z,1478854006.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:47.016Z,1478854007.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:47.038Z,1478854007.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:47.415Z,1478854007.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:47.465Z,1478854007.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:47.817Z,1478854007.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:47.871Z,1478854007.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:48.215Z,1478854008.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:48.231Z,1478854008.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:48.619Z,1478854008.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:48.635Z,1478854008.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:49.012Z,1478854009.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:49.036Z,1478854009.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:49.416Z,1478854009.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:49.431Z,1478854009.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:49.817Z,1478854009.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:49.837Z,1478854009.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:50.220Z,1478854010.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:50.236Z,1478854010.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:50.609Z,1478854010.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:50.644Z,1478854010.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:51.009Z,1478854011.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:51.034Z,1478854011.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:51.416Z,1478854011.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:51.439Z,1478854011.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:51.820Z,1478854011.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:51.836Z,1478854011.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:52.209Z,1478854012.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:52.243Z,1478854012.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:52.610Z,1478854012.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:52.645Z,1478854012.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:53.043Z,1478854013.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:53.104Z,1478854013.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:53.413Z,1478854013.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:53.439Z,1478854013.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:53.813Z,1478854013.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:53.839Z,1478854013.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:54.209Z,1478854014.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:54.245Z,1478854014.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:54.609Z,1478854014.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:54.644Z,1478854014.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:55.009Z,1478854015.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:55.041Z,1478854015.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:55.409Z,1478854015.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:55.445Z,1478854015.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:55.813Z,1478854015.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:55.845Z,1478854015.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:56.217Z,1478854016.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:56.243Z,1478854016.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:56.609Z,1478854016.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:56.646Z,1478854016.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:57.009Z,1478854017.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:57.045Z,1478854017.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:57.409Z,1478854017.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:57.445Z,1478854017.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:57.813Z,1478854017.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:57.841Z,1478854017.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:58.209Z,1478854018.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:58.249Z,1478854018.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:58.609Z,1478854018.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:58.629Z,1478854018.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:59.013Z,1478854019.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:59.028Z,1478854019.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:59.422Z,1478854019.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:59.438Z,1478854019.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:46:59.820Z,1478854019.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:46:59.841Z,1478854019.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:00.215Z,1478854020.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:00.289Z,1478854020.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:00.618Z,1478854020.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:00.633Z,1478854020.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:01.025Z,1478854021.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:01.075Z,1478854021.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:01.416Z,1478854021.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:01.437Z,1478854021.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:01.818Z,1478854021.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:01.874Z,1478854021.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:02.212Z,1478854022.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:02.243Z,1478854022.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:02.617Z,1478854022.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:02.674Z,1478854022.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:03.018Z,1478854023.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:03.033Z,1478854023.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:03.416Z,1478854023.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:03.437Z,1478854023.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:03.816Z,1478854023.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:03.832Z,1478854023.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:04.221Z,1478854024.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:04.241Z,1478854024.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:04.610Z,1478854024.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:04.641Z,1478854024.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:05.009Z,1478854025.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:05.041Z,1478854025.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:05.410Z,1478854025.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:05.449Z,1478854025.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:05.823Z,1478854025.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:05.839Z,1478854025.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:06.209Z,1478854026.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:06.241Z,1478854026.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:06.609Z,1478854026.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:06.641Z,1478854026.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:07.009Z,1478854027.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:07.038Z,1478854027.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:07.409Z,1478854027.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:07.446Z,1478854027.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:07.809Z,1478854027.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:07.830Z,1478854027.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:08.209Z,1478854028.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:08.224Z,1478854028.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:08.609Z,1478854028.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:08.629Z,1478854028.629 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:08.629Z,1478854028.629 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2016-11-11T08:47:08.629Z,1478854028.629 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:47:08.652Z,1478854028.652 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:08.652Z,1478854028.652 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 60
2016-11-11T08:47:08.652Z,1478854028.652 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:47:08.654Z,1478854028.654 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:08.655Z,1478854028.655 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 60
2016-11-11T08:47:08.655Z,1478854028.655 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:47:08.697Z,1478854028.697 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:47:08.698Z,1478854028.698 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:47:08.698Z,1478854028.698 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:47:09.015Z,1478854029.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:09.062Z,1478854029.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:47:09.062Z,1478854029.062 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2016-11-11T08:47:09.075Z,1478854029.075 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:47:09.075Z,1478854029.075 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 60
2016-11-11T08:47:09.076Z,1478854029.076 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:47:09.076Z,1478854029.076 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 60
2016-11-11T08:47:09.412Z,1478854029.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:09.426Z,1478854029.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:47:09.426Z,1478854029.426 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:47:09.426Z,1478854029.427 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:47:09.431Z,1478854029.431 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:47:09.432Z,1478854029.432 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:47:09.432Z,1478854029.432 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:47:09.432Z,1478854029.432 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:47:09.433Z,1478854029.433 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:47:09.433Z,1478854029.433 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:47:09.823Z,1478854029.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:09.839Z,1478854029.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:10.217Z,1478854030.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:10.237Z,1478854030.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:10.609Z,1478854030.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:10.634Z,1478854030.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:11.009Z,1478854031.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:11.045Z,1478854031.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:11.409Z,1478854031.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:11.445Z,1478854031.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:11.820Z,1478854031.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:11.879Z,1478854031.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:12.209Z,1478854032.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:12.234Z,1478854032.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:12.609Z,1478854032.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:12.643Z,1478854032.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:13.009Z,1478854033.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:13.041Z,1478854033.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:13.424Z,1478854033.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:13.440Z,1478854033.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:13.825Z,1478854033.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:13.845Z,1478854033.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:14.209Z,1478854034.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:14.241Z,1478854034.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:14.609Z,1478854034.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:14.685Z,1478854034.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:15.009Z,1478854035.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:15.029Z,1478854035.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:15.414Z,1478854035.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:15.461Z,1478854035.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:15.821Z,1478854035.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:15.836Z,1478854035.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:16.216Z,1478854036.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:16.266Z,1478854036.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:16.609Z,1478854036.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:16.643Z,1478854036.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:17.009Z,1478854037.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:17.068Z,1478854037.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:17.409Z,1478854037.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:17.452Z,1478854037.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:17.809Z,1478854037.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:17.849Z,1478854037.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:18.214Z,1478854038.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:18.229Z,1478854038.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:18.612Z,1478854038.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:18.627Z,1478854038.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:19.016Z,1478854039.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:19.037Z,1478854039.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:19.416Z,1478854039.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:19.431Z,1478854039.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:19.824Z,1478854039.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:19.839Z,1478854039.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:20.217Z,1478854040.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:20.232Z,1478854040.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:20.617Z,1478854040.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:20.632Z,1478854040.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:20.789Z,1478854040.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:21.016Z,1478854041.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:21.041Z,1478854041.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:21.416Z,1478854041.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:21.431Z,1478854041.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:21.585Z,1478854041.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:21.809Z,1478854041.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:21.829Z,1478854041.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:21.996Z,1478854041.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:22.212Z,1478854042.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:22.233Z,1478854042.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:22.614Z,1478854042.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:22.629Z,1478854042.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:22.793Z,1478854042.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:23.016Z,1478854043.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:23.032Z,1478854043.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:23.415Z,1478854043.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:23.437Z,1478854043.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:23.588Z,1478854043.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:23.822Z,1478854043.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:23.848Z,1478854043.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:23.996Z,1478854043.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:24.209Z,1478854044.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:24.235Z,1478854044.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:24.609Z,1478854044.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:24.641Z,1478854044.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:24.792Z,1478854044.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:25.009Z,1478854045.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:25.041Z,1478854045.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:25.424Z,1478854045.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:25.440Z,1478854045.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:25.592Z,1478854045.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:25.823Z,1478854045.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:25.846Z,1478854045.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:26.213Z,1478854046.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:26.238Z,1478854046.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:26.609Z,1478854046.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:26.634Z,1478854046.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:27.009Z,1478854047.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:27.043Z,1478854047.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:27.409Z,1478854047.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:27.441Z,1478854047.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:30.955Z,1478854050.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:31.022Z,1478854051.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:31.145Z,1478854051.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:31.193Z,1478854051.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:31.493Z,1478854051.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:31.541Z,1478854051.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:31.893Z,1478854051.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:31.981Z,1478854051.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:32.301Z,1478854052.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:32.337Z,1478854052.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:32.432Z,1478854052.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:32.697Z,1478854052.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:32.754Z,1478854052.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:33.093Z,1478854053.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:33.157Z,1478854053.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:33.228Z,1478854053.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:33.493Z,1478854053.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:33.565Z,1478854053.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:33.665Z,1478854053.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:33.901Z,1478854053.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:33.945Z,1478854053.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:34.293Z,1478854054.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:34.313Z,1478854054.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:34.460Z,1478854054.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:34.693Z,1478854054.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:34.713Z,1478854054.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:35.101Z,1478854055.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:35.139Z,1478854055.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:35.256Z,1478854055.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:35.545Z,1478854055.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:35.565Z,1478854055.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:35.900Z,1478854055.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:35.923Z,1478854055.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:35.980Z,1478854055.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:36.301Z,1478854056.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:36.316Z,1478854056.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:36.700Z,1478854056.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:36.715Z,1478854056.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:36.776Z,1478854056.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:37.100Z,1478854057.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:37.127Z,1478854057.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:37.540Z,1478854057.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:37.572Z,1478854057.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:37.584Z,1478854057.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:37.893Z,1478854057.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:37.928Z,1478854057.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:37.980Z,1478854057.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:38.293Z,1478854058.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:38.323Z,1478854058.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:38.693Z,1478854058.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:38.728Z,1478854058.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:38.776Z,1478854058.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:39.093Z,1478854059.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:39.154Z,1478854059.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:39.493Z,1478854059.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:39.513Z,1478854059.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:39.572Z,1478854059.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:39.901Z,1478854059.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:39.916Z,1478854059.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:39.980Z,1478854059.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:40.300Z,1478854060.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:40.316Z,1478854060.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:40.700Z,1478854060.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:40.715Z,1478854060.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:41.112Z,1478854061.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:41.175Z,1478854061.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:41.497Z,1478854061.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:41.531Z,1478854061.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:41.901Z,1478854061.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:41.916Z,1478854061.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:42.300Z,1478854062.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:42.325Z,1478854062.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:42.700Z,1478854062.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:42.724Z,1478854062.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:43.133Z,1478854063.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:43.188Z,1478854063.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:43.497Z,1478854063.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:43.534Z,1478854063.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:43.897Z,1478854063.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:43.936Z,1478854063.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:44.293Z,1478854064.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:44.344Z,1478854064.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:44.693Z,1478854064.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:44.765Z,1478854064.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:45.108Z,1478854065.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:45.234Z,1478854065.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:45.500Z,1478854065.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:45.534Z,1478854065.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:45.900Z,1478854065.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:45.930Z,1478854065.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:46.293Z,1478854066.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:46.359Z,1478854066.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:46.693Z,1478854066.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:46.736Z,1478854066.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:47.097Z,1478854067.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:47.194Z,1478854067.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:47.493Z,1478854067.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:47.541Z,1478854067.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:47.893Z,1478854067.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:47.939Z,1478854067.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:48.297Z,1478854068.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:48.337Z,1478854068.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:48.693Z,1478854068.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:48.765Z,1478854068.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:49.098Z,1478854069.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:49.117Z,1478854069.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:49.515Z,1478854069.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:49.553Z,1478854069.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:49.905Z,1478854069.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:49.944Z,1478854069.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:50.302Z,1478854070.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:50.317Z,1478854070.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:50.694Z,1478854070.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:50.733Z,1478854070.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:51.094Z,1478854071.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:51.109Z,1478854071.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:51.514Z,1478854071.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:51.604Z,1478854071.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:51.900Z,1478854071.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:51.939Z,1478854071.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:52.303Z,1478854072.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:52.363Z,1478854072.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:52.702Z,1478854072.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:52.755Z,1478854072.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:53.098Z,1478854073.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:53.181Z,1478854073.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:53.495Z,1478854073.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:53.548Z,1478854073.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:53.901Z,1478854073.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:53.923Z,1478854073.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:54.295Z,1478854074.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:54.332Z,1478854074.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:54.695Z,1478854074.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:54.742Z,1478854074.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:55.160Z,1478854075.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:55.244Z,1478854075.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:55.501Z,1478854075.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:55.526Z,1478854075.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:55.902Z,1478854075.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:55.926Z,1478854075.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:56.295Z,1478854076.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:56.326Z,1478854076.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:56.699Z,1478854076.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:56.753Z,1478854076.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:57.150Z,1478854077.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:57.182Z,1478854077.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:57.493Z,1478854077.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:57.532Z,1478854077.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:57.898Z,1478854077.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:57.943Z,1478854077.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:58.301Z,1478854078.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:58.326Z,1478854078.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:58.702Z,1478854078.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:58.734Z,1478854078.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:59.142Z,1478854079.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:59.183Z,1478854079.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:59.509Z,1478854079.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:59.569Z,1478854079.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:47:59.893Z,1478854079.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:47:59.977Z,1478854079.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:00.293Z,1478854080.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:00.308Z,1478854080.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:00.723Z,1478854080.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:00.765Z,1478854080.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:01.093Z,1478854081.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:01.191Z,1478854081.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:01.503Z,1478854081.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:01.581Z,1478854081.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:01.898Z,1478854081.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:01.982Z,1478854081.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:02.306Z,1478854082.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:02.347Z,1478854082.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:02.699Z,1478854082.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:02.759Z,1478854082.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:03.102Z,1478854083.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:03.117Z,1478854083.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:03.529Z,1478854083.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:03.579Z,1478854083.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:03.893Z,1478854083.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:03.918Z,1478854083.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:04.293Z,1478854084.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:04.353Z,1478854084.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:04.695Z,1478854084.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:04.757Z,1478854084.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:05.095Z,1478854085.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:05.150Z,1478854085.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:05.499Z,1478854085.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:05.573Z,1478854085.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:05.899Z,1478854085.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:05.942Z,1478854085.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:06.295Z,1478854086.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:06.349Z,1478854086.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:06.698Z,1478854086.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:06.754Z,1478854086.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:07.112Z,1478854087.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:07.202Z,1478854087.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:07.508Z,1478854087.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:07.583Z,1478854087.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:07.895Z,1478854087.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:07.938Z,1478854087.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:08.295Z,1478854088.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:08.347Z,1478854088.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:08.699Z,1478854088.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:08.751Z,1478854088.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:09.149Z,1478854089.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:09.182Z,1478854089.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:09.495Z,1478854089.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:09.548Z,1478854089.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:09.911Z,1478854089.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:09.949Z,1478854089.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:10.303Z,1478854090.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:10.329Z,1478854090.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:10.702Z,1478854090.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:10.729Z,1478854090.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:11.101Z,1478854091.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:11.172Z,1478854091.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:11.495Z,1478854091.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:11.538Z,1478854091.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:11.895Z,1478854091.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:11.948Z,1478854091.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:12.295Z,1478854092.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:12.355Z,1478854092.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:12.699Z,1478854092.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:12.745Z,1478854092.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:13.107Z,1478854093.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:13.148Z,1478854093.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:13.495Z,1478854093.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:13.538Z,1478854093.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:13.907Z,1478854093.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:14.020Z,1478854094.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:14.302Z,1478854094.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:14.373Z,1478854094.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:14.701Z,1478854094.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:14.724Z,1478854094.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:15.113Z,1478854095.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:15.176Z,1478854095.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:15.493Z,1478854095.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:15.555Z,1478854095.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:15.893Z,1478854095.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:15.929Z,1478854095.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:16.300Z,1478854096.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:16.357Z,1478854096.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:16.693Z,1478854096.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:16.742Z,1478854096.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:17.093Z,1478854097.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:17.129Z,1478854097.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:17.495Z,1478854097.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:17.531Z,1478854097.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:17.897Z,1478854097.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:17.936Z,1478854097.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:18.293Z,1478854098.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:18.353Z,1478854098.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:18.705Z,1478854098.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:18.760Z,1478854098.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:19.097Z,1478854099.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:19.111Z,1478854099.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:19.496Z,1478854099.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:19.511Z,1478854099.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:19.903Z,1478854099.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:19.927Z,1478854099.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:20.300Z,1478854100.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:20.323Z,1478854100.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:20.699Z,1478854100.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:20.727Z,1478854100.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:21.106Z,1478854101.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:21.172Z,1478854101.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:21.493Z,1478854101.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:21.542Z,1478854101.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:21.893Z,1478854101.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:21.977Z,1478854101.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:22.293Z,1478854102.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:22.319Z,1478854102.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:22.693Z,1478854102.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:22.739Z,1478854102.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:23.100Z,1478854103.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:23.155Z,1478854103.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:23.497Z,1478854103.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:23.518Z,1478854103.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:23.901Z,1478854103.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:23.917Z,1478854103.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:24.306Z,1478854104.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:24.323Z,1478854104.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:24.696Z,1478854104.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:24.739Z,1478854104.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:25.121Z,1478854105.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:25.162Z,1478854105.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:25.500Z,1478854105.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:25.533Z,1478854105.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:25.896Z,1478854105.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:25.929Z,1478854105.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:26.293Z,1478854106.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:26.328Z,1478854106.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:26.694Z,1478854106.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:26.744Z,1478854106.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:27.108Z,1478854107.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:27.152Z,1478854107.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:27.502Z,1478854107.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:27.526Z,1478854107.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:30.873Z,1478854110.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:30.938Z,1478854110.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:31.027Z,1478854111.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:31.069Z,1478854111.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:31.428Z,1478854111.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:31.489Z,1478854111.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:31.809Z,1478854111.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:31.841Z,1478854111.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:32.209Z,1478854112.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:32.267Z,1478854112.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:32.609Z,1478854112.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:32.658Z,1478854112.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:33.009Z,1478854113.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:33.034Z,1478854113.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:33.428Z,1478854113.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:33.470Z,1478854113.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:33.809Z,1478854113.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:33.853Z,1478854113.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:34.209Z,1478854114.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:34.241Z,1478854114.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:34.616Z,1478854114.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:34.632Z,1478854114.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:35.033Z,1478854115.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:35.101Z,1478854115.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:35.409Z,1478854115.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:35.424Z,1478854115.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:35.817Z,1478854115.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:35.854Z,1478854115.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:36.209Z,1478854116.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:36.229Z,1478854116.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:36.612Z,1478854116.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:36.627Z,1478854116.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:37.018Z,1478854117.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:37.085Z,1478854117.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:37.420Z,1478854117.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:37.441Z,1478854117.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:37.816Z,1478854117.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:37.837Z,1478854117.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:38.224Z,1478854118.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:38.239Z,1478854118.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:38.617Z,1478854118.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:38.637Z,1478854118.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:39.064Z,1478854119.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:39.098Z,1478854119.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:39.409Z,1478854119.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:39.429Z,1478854119.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:39.814Z,1478854119.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:39.833Z,1478854119.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:40.213Z,1478854120.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:40.228Z,1478854120.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:40.613Z,1478854120.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:40.628Z,1478854120.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:41.060Z,1478854121.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:41.129Z,1478854121.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:41.416Z,1478854121.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:41.437Z,1478854121.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:41.817Z,1478854121.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:41.833Z,1478854121.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:42.216Z,1478854122.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:42.243Z,1478854122.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:42.615Z,1478854122.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:42.630Z,1478854122.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:43.016Z,1478854123.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:43.032Z,1478854123.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:43.418Z,1478854123.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:43.444Z,1478854123.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:43.809Z,1478854123.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:43.817Z,1478854123.817 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T08:48:43.817Z,1478854123.817 [BPC1] Data Fault, FailCount= 1
2016-11-11T08:48:43.817Z,1478854123.818 [BPC1](ERROR): Data Fault
2016-11-11T08:48:43.845Z,1478854123.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:43.898Z,1478854123.898 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T08:48:44.217Z,1478854124.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:44.233Z,1478854124.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:44.332Z,1478854124.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:44.617Z,1478854124.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:44.632Z,1478854124.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:45.016Z,1478854125.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:45.031Z,1478854125.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:45.078Z,1478854125.078 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:48:45.078Z,1478854125.078 [BPC1] No Fault, FailCount= 1
2016-11-11T08:48:45.128Z,1478854125.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:45.421Z,1478854125.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:45.531Z,1478854125.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:45.818Z,1478854125.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:45.869Z,1478854125.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:46.216Z,1478854126.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:46.237Z,1478854126.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:46.612Z,1478854126.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:46.635Z,1478854126.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:47.009Z,1478854127.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:47.044Z,1478854127.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:47.422Z,1478854127.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:47.469Z,1478854127.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:47.809Z,1478854127.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:47.858Z,1478854127.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:48.213Z,1478854128.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:48.249Z,1478854128.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:48.609Z,1478854128.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:48.624Z,1478854128.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:49.057Z,1478854129.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:49.098Z,1478854129.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:49.412Z,1478854129.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:49.427Z,1478854129.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:49.817Z,1478854129.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:49.832Z,1478854129.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:50.217Z,1478854130.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:50.232Z,1478854130.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:50.611Z,1478854130.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:50.641Z,1478854130.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:51.075Z,1478854131.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:51.101Z,1478854131.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:51.413Z,1478854131.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:51.438Z,1478854131.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:51.817Z,1478854131.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:51.849Z,1478854131.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:52.209Z,1478854132.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:52.236Z,1478854132.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:52.613Z,1478854132.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:52.650Z,1478854132.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:53.064Z,1478854133.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:53.100Z,1478854133.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:53.414Z,1478854133.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:53.441Z,1478854133.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:53.825Z,1478854133.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:53.840Z,1478854133.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:54.209Z,1478854134.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:54.242Z,1478854134.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:54.609Z,1478854134.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:54.649Z,1478854134.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:55.022Z,1478854135.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:55.070Z,1478854135.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:55.415Z,1478854135.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:55.430Z,1478854135.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:55.822Z,1478854135.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:55.837Z,1478854135.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:56.217Z,1478854136.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:56.237Z,1478854136.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:56.620Z,1478854136.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:56.635Z,1478854136.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:57.018Z,1478854137.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:57.033Z,1478854137.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:57.414Z,1478854137.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:57.445Z,1478854137.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:57.814Z,1478854137.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:57.865Z,1478854137.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:58.218Z,1478854138.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:58.233Z,1478854138.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:58.616Z,1478854138.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:58.669Z,1478854138.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:59.021Z,1478854139.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:59.041Z,1478854139.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:59.421Z,1478854139.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:59.443Z,1478854139.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:48:59.809Z,1478854139.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:48:59.877Z,1478854139.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:00.209Z,1478854140.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:00.241Z,1478854140.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:00.609Z,1478854140.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:00.662Z,1478854140.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:01.009Z,1478854141.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:01.054Z,1478854141.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:01.437Z,1478854141.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:01.453Z,1478854141.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:01.809Z,1478854141.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:01.833Z,1478854141.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:02.224Z,1478854142.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:02.240Z,1478854142.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:02.620Z,1478854142.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:02.641Z,1478854142.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:03.024Z,1478854143.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:03.090Z,1478854143.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:03.409Z,1478854143.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:03.437Z,1478854143.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:03.817Z,1478854143.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:03.838Z,1478854143.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:04.217Z,1478854144.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:04.237Z,1478854144.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:04.609Z,1478854144.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:04.634Z,1478854144.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:04.688Z,1478854144.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:05.024Z,1478854145.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:05.090Z,1478854145.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:05.409Z,1478854145.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:05.436Z,1478854145.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:05.484Z,1478854145.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:05.809Z,1478854145.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:05.849Z,1478854145.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:06.214Z,1478854146.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:06.229Z,1478854146.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:06.280Z,1478854146.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:06.609Z,1478854146.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:06.624Z,1478854146.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:07.014Z,1478854147.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:07.062Z,1478854147.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:07.076Z,1478854147.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:07.421Z,1478854147.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:07.442Z,1478854147.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:07.484Z,1478854147.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:07.809Z,1478854147.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:07.842Z,1478854147.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:08.209Z,1478854148.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:08.235Z,1478854148.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:08.280Z,1478854148.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:08.609Z,1478854148.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:08.645Z,1478854148.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:09.015Z,1478854149.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:09.076Z,1478854149.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:09.100Z,1478854149.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:09.413Z,1478854149.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:09.428Z,1478854149.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:09.488Z,1478854149.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:09.809Z,1478854149.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:09.829Z,1478854149.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:10.209Z,1478854150.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:10.229Z,1478854150.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:10.617Z,1478854150.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:10.633Z,1478854150.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:11.027Z,1478854151.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:11.095Z,1478854151.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:11.415Z,1478854151.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:11.431Z,1478854151.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:11.812Z,1478854151.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:11.840Z,1478854151.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:12.217Z,1478854152.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:12.237Z,1478854152.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:12.612Z,1478854152.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:12.636Z,1478854152.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:13.012Z,1478854153.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:13.036Z,1478854153.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:13.429Z,1478854153.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:13.509Z,1478854153.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:13.809Z,1478854153.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:13.844Z,1478854153.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:14.209Z,1478854154.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:14.265Z,1478854154.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:14.624Z,1478854154.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:14.645Z,1478854154.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:15.009Z,1478854155.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:15.061Z,1478854155.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:15.411Z,1478854155.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:15.482Z,1478854155.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:15.809Z,1478854155.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:15.842Z,1478854155.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:16.213Z,1478854156.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:16.246Z,1478854156.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:16.609Z,1478854156.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:16.645Z,1478854156.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:17.016Z,1478854157.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:17.056Z,1478854157.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:17.409Z,1478854157.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:17.445Z,1478854157.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:17.809Z,1478854157.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:17.825Z,1478854157.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:18.212Z,1478854158.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:18.241Z,1478854158.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:18.618Z,1478854158.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:18.633Z,1478854158.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:19.022Z,1478854159.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:19.050Z,1478854159.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:19.420Z,1478854159.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:19.453Z,1478854159.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:19.809Z,1478854159.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:19.845Z,1478854159.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:20.209Z,1478854160.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:20.233Z,1478854160.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:20.613Z,1478854160.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:20.646Z,1478854160.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:21.036Z,1478854161.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:21.064Z,1478854161.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:21.413Z,1478854161.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:21.457Z,1478854161.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:21.813Z,1478854161.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:21.833Z,1478854161.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:22.212Z,1478854162.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:22.233Z,1478854162.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:22.617Z,1478854162.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:22.637Z,1478854162.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:23.021Z,1478854163.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:23.049Z,1478854163.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:23.426Z,1478854163.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:23.445Z,1478854163.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:23.809Z,1478854163.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:23.845Z,1478854163.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:24.209Z,1478854164.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:24.245Z,1478854164.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:24.613Z,1478854164.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:24.652Z,1478854164.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:25.059Z,1478854165.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:25.098Z,1478854165.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:25.416Z,1478854165.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:25.444Z,1478854165.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:25.809Z,1478854165.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:25.835Z,1478854165.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:26.209Z,1478854166.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:26.241Z,1478854166.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:26.616Z,1478854166.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:26.649Z,1478854166.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:27.009Z,1478854167.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:27.045Z,1478854167.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:27.413Z,1478854167.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:27.503Z,1478854167.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:27.818Z,1478854167.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:27.833Z,1478854167.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:31.299Z,1478854171.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:31.338Z,1478854171.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:31.451Z,1478854171.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:31.485Z,1478854171.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:31.845Z,1478854171.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:31.900Z,1478854171.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:32.244Z,1478854172.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:32.295Z,1478854172.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:32.646Z,1478854172.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:32.674Z,1478854172.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:33.044Z,1478854173.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:33.058Z,1478854173.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:33.439Z,1478854173.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:33.473Z,1478854173.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:33.837Z,1478854173.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:33.872Z,1478854173.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:34.237Z,1478854174.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:34.270Z,1478854174.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:34.637Z,1478854174.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:34.671Z,1478854174.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:35.037Z,1478854175.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:35.062Z,1478854175.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:35.448Z,1478854175.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:35.472Z,1478854175.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:35.837Z,1478854175.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:35.873Z,1478854175.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:36.236Z,1478854176.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:36.269Z,1478854176.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:36.637Z,1478854176.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:36.673Z,1478854176.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:37.038Z,1478854177.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:37.057Z,1478854177.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:37.441Z,1478854177.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:37.478Z,1478854177.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:37.837Z,1478854177.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:37.881Z,1478854177.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:38.238Z,1478854178.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:38.252Z,1478854178.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:38.641Z,1478854178.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:38.661Z,1478854178.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:39.052Z,1478854179.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:39.094Z,1478854179.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:39.445Z,1478854179.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:39.465Z,1478854179.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:39.837Z,1478854179.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:39.874Z,1478854179.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:40.237Z,1478854180.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:40.278Z,1478854180.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:40.637Z,1478854180.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:40.677Z,1478854180.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:41.037Z,1478854181.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:41.065Z,1478854181.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:41.445Z,1478854181.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:41.491Z,1478854181.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:41.841Z,1478854181.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:41.878Z,1478854181.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:42.241Z,1478854182.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:42.257Z,1478854182.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:42.640Z,1478854182.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:42.657Z,1478854182.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:43.051Z,1478854183.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:43.066Z,1478854183.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:43.445Z,1478854183.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:43.475Z,1478854183.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:43.841Z,1478854183.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:43.917Z,1478854183.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:44.237Z,1478854184.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:44.252Z,1478854184.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:44.645Z,1478854184.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:44.661Z,1478854184.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:45.052Z,1478854185.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:45.104Z,1478854185.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:45.444Z,1478854185.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:45.468Z,1478854185.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:45.838Z,1478854185.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:45.912Z,1478854185.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:46.241Z,1478854186.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:46.283Z,1478854186.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:46.637Z,1478854186.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:46.664Z,1478854186.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:47.037Z,1478854187.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:47.073Z,1478854187.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:47.449Z,1478854187.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:47.484Z,1478854187.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:47.837Z,1478854187.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:47.866Z,1478854187.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:48.244Z,1478854188.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:48.263Z,1478854188.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:48.648Z,1478854188.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:48.669Z,1478854188.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:49.045Z,1478854189.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:49.060Z,1478854189.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:49.444Z,1478854189.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:49.470Z,1478854189.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:49.844Z,1478854189.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:49.877Z,1478854189.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:50.237Z,1478854190.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:50.262Z,1478854190.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:50.637Z,1478854190.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:50.675Z,1478854190.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:51.037Z,1478854191.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:51.076Z,1478854191.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:51.445Z,1478854191.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:51.485Z,1478854191.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:51.837Z,1478854191.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:51.876Z,1478854191.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:52.237Z,1478854192.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:52.257Z,1478854192.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:52.640Z,1478854192.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:52.655Z,1478854192.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:53.043Z,1478854193.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:53.088Z,1478854193.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:53.445Z,1478854193.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:53.465Z,1478854193.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:53.843Z,1478854193.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:53.858Z,1478854193.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:54.244Z,1478854194.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:54.262Z,1478854194.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:54.643Z,1478854194.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:54.665Z,1478854194.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:55.040Z,1478854195.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:55.073Z,1478854195.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:55.452Z,1478854195.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:55.471Z,1478854195.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:55.841Z,1478854195.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:55.873Z,1478854195.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:56.237Z,1478854196.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:56.277Z,1478854196.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:56.637Z,1478854196.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:56.676Z,1478854196.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:57.037Z,1478854197.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:57.077Z,1478854197.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:57.445Z,1478854197.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:57.478Z,1478854197.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:57.837Z,1478854197.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:57.917Z,1478854197.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:58.248Z,1478854198.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:58.291Z,1478854198.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:58.643Z,1478854198.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:58.669Z,1478854198.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:59.044Z,1478854199.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:59.100Z,1478854199.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:59.442Z,1478854199.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:59.474Z,1478854199.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:49:59.837Z,1478854199.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:49:59.902Z,1478854199.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:00.237Z,1478854200.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:00.302Z,1478854200.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:00.641Z,1478854200.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:00.677Z,1478854200.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:01.038Z,1478854201.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:01.065Z,1478854201.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:01.444Z,1478854201.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:01.478Z,1478854201.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:01.845Z,1478854201.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:01.880Z,1478854201.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:02.240Z,1478854202.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:02.265Z,1478854202.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:02.635Z,1478854202.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:02.664Z,1478854202.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:03.049Z,1478854203.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:03.090Z,1478854203.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:03.445Z,1478854203.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:03.464Z,1478854203.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:03.845Z,1478854203.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:03.862Z,1478854203.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:04.246Z,1478854204.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:04.269Z,1478854204.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:04.645Z,1478854204.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:04.672Z,1478854204.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:05.037Z,1478854205.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:05.074Z,1478854205.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:05.437Z,1478854205.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:05.472Z,1478854205.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:05.839Z,1478854205.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:05.877Z,1478854205.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:06.237Z,1478854206.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:06.277Z,1478854206.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:06.645Z,1478854206.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:06.684Z,1478854206.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:07.052Z,1478854207.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:07.084Z,1478854207.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:07.443Z,1478854207.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:07.459Z,1478854207.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:07.845Z,1478854207.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:07.886Z,1478854207.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:08.245Z,1478854208.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:08.280Z,1478854208.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:08.645Z,1478854208.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:08.673Z,1478854208.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:09.050Z,1478854209.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:09.074Z,1478854209.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:09.444Z,1478854209.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:09.477Z,1478854209.477 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:09.477Z,1478854209.477 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2016-11-11T08:50:09.477Z,1478854209.477 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:50:09.483Z,1478854209.483 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:09.483Z,1478854209.483 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 61
2016-11-11T08:50:09.484Z,1478854209.484 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:50:09.486Z,1478854209.486 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:09.486Z,1478854209.486 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 61
2016-11-11T08:50:09.486Z,1478854209.486 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:50:09.534Z,1478854209.534 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:50:09.534Z,1478854209.534 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:50:09.534Z,1478854209.534 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:50:09.851Z,1478854209.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:09.911Z,1478854209.911 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:50:09.911Z,1478854209.911 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2016-11-11T08:50:09.912Z,1478854209.912 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:50:09.912Z,1478854209.912 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 61
2016-11-11T08:50:09.913Z,1478854209.913 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:50:09.913Z,1478854209.913 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 61
2016-11-11T08:50:10.241Z,1478854210.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:10.272Z,1478854210.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:50:10.273Z,1478854210.273 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:50:10.273Z,1478854210.273 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:50:10.282Z,1478854210.282 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:50:10.282Z,1478854210.282 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:50:10.283Z,1478854210.283 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:50:10.283Z,1478854210.283 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:50:10.284Z,1478854210.284 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:50:10.284Z,1478854210.284 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:50:10.641Z,1478854210.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:10.677Z,1478854210.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:11.037Z,1478854211.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:11.077Z,1478854211.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:11.453Z,1478854211.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:11.465Z,1478854211.464 [PNI_TCM](ERROR): CRC does not match. Expected:0x50987 got:0x6591
2016-11-11T08:50:11.489Z,1478854211.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:11.838Z,1478854211.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:11.897Z,1478854211.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:12.239Z,1478854212.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:12.285Z,1478854212.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:12.673Z,1478854212.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:12.690Z,1478854212.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:13.051Z,1478854213.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:13.097Z,1478854213.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:13.451Z,1478854213.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:13.478Z,1478854213.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:13.843Z,1478854213.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:13.891Z,1478854213.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:14.245Z,1478854214.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:14.263Z,1478854214.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:14.648Z,1478854214.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:14.700Z,1478854214.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:15.039Z,1478854215.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:15.065Z,1478854215.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:15.438Z,1478854215.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:15.473Z,1478854215.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:15.837Z,1478854215.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:15.877Z,1478854215.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:16.239Z,1478854216.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:16.270Z,1478854216.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:16.640Z,1478854216.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:16.667Z,1478854216.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:17.038Z,1478854217.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:17.075Z,1478854217.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:17.447Z,1478854217.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:17.481Z,1478854217.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:17.839Z,1478854217.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:17.865Z,1478854217.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:18.246Z,1478854218.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:18.266Z,1478854218.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:18.644Z,1478854218.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:18.660Z,1478854218.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:19.049Z,1478854219.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:19.065Z,1478854219.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:19.439Z,1478854219.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:19.472Z,1478854219.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:19.839Z,1478854219.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:19.873Z,1478854219.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:20.237Z,1478854220.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:20.275Z,1478854220.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:20.638Z,1478854220.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:20.677Z,1478854220.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:21.040Z,1478854221.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:21.065Z,1478854221.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:21.438Z,1478854221.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:21.470Z,1478854221.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:21.841Z,1478854221.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:21.866Z,1478854221.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:22.239Z,1478854222.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:22.274Z,1478854222.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:22.639Z,1478854222.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:22.677Z,1478854222.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:23.037Z,1478854223.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:23.073Z,1478854223.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:23.437Z,1478854223.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:23.473Z,1478854223.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:23.839Z,1478854223.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:23.873Z,1478854223.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:24.239Z,1478854224.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:24.271Z,1478854224.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:24.641Z,1478854224.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:24.677Z,1478854224.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:25.037Z,1478854225.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:25.077Z,1478854225.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:25.448Z,1478854225.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:25.476Z,1478854225.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:25.839Z,1478854225.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:25.869Z,1478854225.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:26.241Z,1478854226.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:26.305Z,1478854226.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:26.644Z,1478854226.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:26.705Z,1478854226.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:26.729Z,1478854226.729 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T08:50:26.730Z,1478854226.730 [Default:CheckIn:C.Wait] Stopped
2016-11-11T08:50:26.730Z,1478854226.730 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T08:50:26.730Z,1478854226.730 [Default:CheckIn:D] Running Loop=1
2016-11-11T08:50:27.045Z,1478854227.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:27.065Z,1478854227.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:27.074Z,1478854227.074 [Default:CheckIn:D] Stopped
2016-11-11T08:50:27.074Z,1478854227.074 [Default:CheckIn:E] Running Loop=1
2016-11-11T08:50:27.440Z,1478854227.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:27.495Z,1478854227.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:27.505Z,1478854227.505 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 240.429395 min 
2016-11-11T08:50:27.505Z,1478854227.505 [Default:CheckIn:E] Stopped
2016-11-11T08:50:27.505Z,1478854227.505 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T08:50:27.505Z,1478854227.505 [Default:CheckIn] Stopped
2016-11-11T08:50:27.505Z,1478854227.505 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T08:50:27.506Z,1478854227.506 [Default:CheckIn](INFO): Running loop #24
2016-11-11T08:50:27.506Z,1478854227.506 [Default:CheckIn] Running Loop=24
2016-11-11T08:50:27.506Z,1478854227.506 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T08:50:27.506Z,1478854227.506 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T08:50:27.837Z,1478854227.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:27.869Z,1478854227.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:31.425Z,1478854231.425 [NAL9602](INFO): Powering up
2016-11-11T08:50:31.453Z,1478854231.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:31.509Z,1478854231.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:31.615Z,1478854231.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:31.658Z,1478854231.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:32.009Z,1478854232.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:32.065Z,1478854232.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:32.410Z,1478854232.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:32.424Z,1478854232.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:32.808Z,1478854232.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:32.831Z,1478854232.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:33.201Z,1478854233.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:33.233Z,1478854233.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:33.601Z,1478854233.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:33.645Z,1478854233.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:34.001Z,1478854234.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:34.037Z,1478854234.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:34.401Z,1478854234.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:34.441Z,1478854234.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:34.801Z,1478854234.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:34.845Z,1478854234.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:35.204Z,1478854235.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:35.220Z,1478854235.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:35.613Z,1478854235.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:35.634Z,1478854235.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:36.008Z,1478854236.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:36.023Z,1478854236.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:36.408Z,1478854236.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:36.424Z,1478854236.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:36.808Z,1478854236.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:36.829Z,1478854236.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:37.233Z,1478854237.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:37.268Z,1478854237.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:37.601Z,1478854237.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:37.621Z,1478854237.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:38.004Z,1478854238.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:38.020Z,1478854238.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:38.404Z,1478854238.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:38.421Z,1478854238.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:38.808Z,1478854238.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:38.824Z,1478854238.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:39.247Z,1478854239.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:39.284Z,1478854239.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:39.609Z,1478854239.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:39.645Z,1478854239.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:40.001Z,1478854240.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:40.021Z,1478854240.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:40.401Z,1478854240.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:40.421Z,1478854240.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:40.807Z,1478854240.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:40.873Z,1478854240.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:41.211Z,1478854241.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:41.227Z,1478854241.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:41.615Z,1478854241.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:41.630Z,1478854241.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:42.019Z,1478854242.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:42.034Z,1478854242.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:42.385Z,1478854242.385 [NAL9602](INFO): NAL9602 initialized
2016-11-11T08:50:42.401Z,1478854242.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:42.432Z,1478854242.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:42.801Z,1478854242.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:42.885Z,1478854242.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:43.196Z,1478854243.196 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T08:50:43.196Z,1478854243.196 [NAL9602] Data Fault, FailCount= 1
2016-11-11T08:50:43.196Z,1478854243.196 [NAL9602](ERROR): Data Fault
2016-11-11T08:50:43.213Z,1478854243.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:43.229Z,1478854243.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:43.278Z,1478854243.278 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T08:50:43.596Z,1478854243.596 [NAL9602](INFO): Powering down
2016-11-11T08:50:43.613Z,1478854243.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:43.629Z,1478854243.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:44.008Z,1478854244.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:44.042Z,1478854244.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:44.401Z,1478854244.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:44.435Z,1478854244.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:44.478Z,1478854244.478 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T08:50:44.478Z,1478854244.478 [NAL9602] No Fault, FailCount= 1
2016-11-11T08:50:44.801Z,1478854244.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:44.887Z,1478854244.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:45.207Z,1478854245.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:45.222Z,1478854245.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:45.603Z,1478854245.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:45.657Z,1478854245.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:46.007Z,1478854246.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:46.060Z,1478854246.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:46.408Z,1478854246.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:46.423Z,1478854246.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:46.808Z,1478854246.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:46.914Z,1478854246.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:47.208Z,1478854247.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:47.223Z,1478854247.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:47.607Z,1478854247.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:47.635Z,1478854247.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:48.009Z,1478854248.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:48.029Z,1478854248.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:48.408Z,1478854248.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:48.424Z,1478854248.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:48.785Z,1478854248.785 [NAL9602](INFO): Powering up NAL9602
2016-11-11T08:50:48.810Z,1478854248.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:48.837Z,1478854248.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:49.209Z,1478854249.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:49.242Z,1478854249.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:49.601Z,1478854249.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:49.645Z,1478854249.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:50.001Z,1478854250.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:50.037Z,1478854250.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:50.156Z,1478854250.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:50.401Z,1478854250.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:50.432Z,1478854250.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:50.832Z,1478854250.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:50.852Z,1478854250.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:50.952Z,1478854250.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:51.232Z,1478854251.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:51.260Z,1478854251.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:51.604Z,1478854251.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:51.619Z,1478854251.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:52.004Z,1478854252.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:52.020Z,1478854252.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:52.404Z,1478854252.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:52.431Z,1478854252.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:52.805Z,1478854252.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:52.826Z,1478854252.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:53.219Z,1478854253.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:53.261Z,1478854253.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:53.605Z,1478854253.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:53.630Z,1478854253.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:54.001Z,1478854254.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:54.033Z,1478854254.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:54.405Z,1478854254.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:54.437Z,1478854254.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:54.806Z,1478854254.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:54.863Z,1478854254.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:55.205Z,1478854255.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:55.225Z,1478854255.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:55.601Z,1478854255.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:55.621Z,1478854255.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:56.006Z,1478854256.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:56.022Z,1478854256.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:56.409Z,1478854256.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:56.469Z,1478854256.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:56.844Z,1478854256.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:56.890Z,1478854256.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:57.208Z,1478854257.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:57.222Z,1478854257.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:57.601Z,1478854257.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:57.636Z,1478854257.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:58.009Z,1478854258.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:58.049Z,1478854258.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:58.401Z,1478854258.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:58.434Z,1478854258.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:58.827Z,1478854258.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:58.881Z,1478854258.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:59.220Z,1478854259.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:59.274Z,1478854259.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:50:59.585Z,1478854259.585 [NAL9602](INFO): NAL9602 initialized
2016-11-11T08:50:59.602Z,1478854259.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:50:59.633Z,1478854259.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:00.001Z,1478854260.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:00.049Z,1478854260.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:00.425Z,1478854260.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:00.482Z,1478854260.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:00.833Z,1478854260.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:00.881Z,1478854260.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:01.222Z,1478854261.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:01.241Z,1478854261.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:01.610Z,1478854261.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:01.625Z,1478854261.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:02.017Z,1478854262.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:02.032Z,1478854262.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:02.409Z,1478854262.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:02.432Z,1478854262.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:02.824Z,1478854262.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:02.839Z,1478854262.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:03.201Z,1478854263.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:03.233Z,1478854263.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:03.605Z,1478854263.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:03.637Z,1478854263.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:04.002Z,1478854264.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:04.029Z,1478854264.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:04.148Z,1478854264.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:04.401Z,1478854264.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:04.437Z,1478854264.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:04.809Z,1478854264.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:04.844Z,1478854264.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:04.944Z,1478854264.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:05.211Z,1478854265.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:05.236Z,1478854265.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:05.604Z,1478854265.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:05.636Z,1478854265.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:06.018Z,1478854266.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:06.041Z,1478854266.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:06.401Z,1478854266.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:06.437Z,1478854266.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:06.823Z,1478854266.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:06.846Z,1478854266.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:07.228Z,1478854267.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:07.252Z,1478854267.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:07.602Z,1478854267.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:07.625Z,1478854267.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:08.005Z,1478854268.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:08.042Z,1478854268.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:08.405Z,1478854268.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:08.442Z,1478854268.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:08.860Z,1478854268.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:08.897Z,1478854268.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:09.201Z,1478854269.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:09.218Z,1478854269.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:09.601Z,1478854269.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:09.622Z,1478854269.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:10.005Z,1478854270.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:10.026Z,1478854270.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:10.409Z,1478854270.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:10.430Z,1478854270.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:10.819Z,1478854270.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:10.901Z,1478854270.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:11.228Z,1478854271.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:11.245Z,1478854271.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:11.624Z,1478854271.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:11.648Z,1478854271.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:12.001Z,1478854272.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:12.057Z,1478854272.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:12.401Z,1478854272.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:12.417Z,1478854272.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:12.853Z,1478854272.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:12.913Z,1478854272.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:13.204Z,1478854273.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:13.219Z,1478854273.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:13.609Z,1478854273.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:13.661Z,1478854273.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:14.009Z,1478854274.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:14.061Z,1478854274.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:14.408Z,1478854274.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:14.423Z,1478854274.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:14.830Z,1478854274.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:14.863Z,1478854274.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:15.216Z,1478854275.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:15.231Z,1478854275.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:15.612Z,1478854275.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:15.637Z,1478854275.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:16.020Z,1478854276.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:16.036Z,1478854276.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:16.414Z,1478854276.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:16.445Z,1478854276.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:16.808Z,1478854276.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:16.845Z,1478854276.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:17.202Z,1478854277.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:17.237Z,1478854277.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:17.601Z,1478854277.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:17.637Z,1478854277.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:18.013Z,1478854278.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:18.043Z,1478854278.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:18.405Z,1478854278.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:18.420Z,1478854278.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:18.805Z,1478854278.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:18.825Z,1478854278.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:19.211Z,1478854279.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:19.258Z,1478854279.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:19.604Z,1478854279.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:19.637Z,1478854279.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:20.018Z,1478854280.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:20.037Z,1478854280.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:20.418Z,1478854280.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:20.433Z,1478854280.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:20.825Z,1478854280.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:20.845Z,1478854280.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:21.224Z,1478854281.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:21.239Z,1478854281.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:21.601Z,1478854281.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:21.633Z,1478854281.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:22.002Z,1478854282.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:22.037Z,1478854282.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:22.401Z,1478854282.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:22.437Z,1478854282.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:22.827Z,1478854282.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:22.887Z,1478854282.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:23.201Z,1478854283.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:23.241Z,1478854283.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:23.605Z,1478854283.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:23.641Z,1478854283.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:24.005Z,1478854284.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:24.020Z,1478854284.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:24.405Z,1478854284.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:24.425Z,1478854284.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:24.832Z,1478854284.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:24.912Z,1478854284.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:25.219Z,1478854285.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:25.234Z,1478854285.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:25.624Z,1478854285.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:25.677Z,1478854285.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:26.016Z,1478854286.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:26.039Z,1478854286.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:26.401Z,1478854286.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:26.453Z,1478854286.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:26.828Z,1478854286.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:26.860Z,1478854286.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:27.201Z,1478854287.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:27.254Z,1478854287.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:27.607Z,1478854287.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:27.655Z,1478854287.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:28.006Z,1478854288.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:28.041Z,1478854288.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:31.447Z,1478854291.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:31.463Z,1478854291.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:31.580Z,1478854291.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:31.617Z,1478854291.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:31.960Z,1478854291.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:31.981Z,1478854291.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:32.358Z,1478854292.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:32.377Z,1478854292.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:32.748Z,1478854292.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:32.776Z,1478854292.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:33.189Z,1478854293.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:33.225Z,1478854293.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:33.549Z,1478854293.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:33.589Z,1478854293.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:33.949Z,1478854293.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:33.986Z,1478854293.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:34.345Z,1478854294.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:34.361Z,1478854294.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:34.749Z,1478854294.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:34.785Z,1478854294.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:35.191Z,1478854295.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:35.218Z,1478854295.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:35.549Z,1478854295.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:35.564Z,1478854295.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:35.945Z,1478854295.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:35.968Z,1478854295.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:36.364Z,1478854296.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:36.380Z,1478854296.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:36.775Z,1478854296.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:36.818Z,1478854296.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:37.204Z,1478854297.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:37.220Z,1478854297.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:37.554Z,1478854297.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:37.574Z,1478854297.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:37.953Z,1478854297.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:37.985Z,1478854297.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:38.356Z,1478854298.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:38.389Z,1478854298.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:38.814Z,1478854298.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:38.909Z,1478854298.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:39.150Z,1478854299.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:39.165Z,1478854299.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:39.545Z,1478854299.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:39.565Z,1478854299.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:39.954Z,1478854299.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:40.013Z,1478854300.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:40.350Z,1478854300.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:40.366Z,1478854300.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:40.783Z,1478854300.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:40.856Z,1478854300.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:41.141Z,1478854301.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:41.157Z,1478854301.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:41.556Z,1478854301.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:41.598Z,1478854301.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:41.957Z,1478854301.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:42.005Z,1478854302.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:42.356Z,1478854302.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:42.388Z,1478854302.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:42.814Z,1478854302.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:42.855Z,1478854302.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:43.144Z,1478854303.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:43.172Z,1478854303.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:43.550Z,1478854303.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:43.565Z,1478854303.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:43.941Z,1478854303.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:43.977Z,1478854303.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:44.341Z,1478854304.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:44.367Z,1478854304.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:44.741Z,1478854304.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:44.773Z,1478854304.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:45.153Z,1478854305.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:45.185Z,1478854305.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:45.545Z,1478854305.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:45.565Z,1478854305.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:45.946Z,1478854305.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:45.967Z,1478854305.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:46.348Z,1478854306.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:46.363Z,1478854306.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:46.756Z,1478854306.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:46.771Z,1478854306.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:47.163Z,1478854307.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:47.216Z,1478854307.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:47.556Z,1478854307.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:47.594Z,1478854307.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:47.954Z,1478854307.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:47.978Z,1478854307.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:48.348Z,1478854308.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:48.368Z,1478854308.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:48.741Z,1478854308.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:48.773Z,1478854308.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:49.162Z,1478854309.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:49.190Z,1478854309.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:49.545Z,1478854309.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:49.581Z,1478854309.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:49.981Z,1478854309.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:50.009Z,1478854310.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:50.354Z,1478854310.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:50.382Z,1478854310.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:50.771Z,1478854310.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:50.818Z,1478854310.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:51.145Z,1478854311.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:51.182Z,1478854311.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:51.573Z,1478854311.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:51.593Z,1478854311.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:51.974Z,1478854311.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:51.989Z,1478854311.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:52.350Z,1478854312.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:52.406Z,1478854312.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:52.780Z,1478854312.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:52.820Z,1478854312.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:53.167Z,1478854313.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:53.183Z,1478854313.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:53.549Z,1478854313.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:53.581Z,1478854313.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:53.982Z,1478854313.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:54.006Z,1478854314.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:54.342Z,1478854314.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:54.401Z,1478854314.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:54.789Z,1478854314.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:54.834Z,1478854314.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:55.157Z,1478854315.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:55.191Z,1478854315.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:55.584Z,1478854315.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:55.633Z,1478854315.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:55.954Z,1478854315.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:55.984Z,1478854315.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:56.342Z,1478854316.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:56.393Z,1478854316.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:56.776Z,1478854316.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:56.838Z,1478854316.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:57.146Z,1478854317.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:57.165Z,1478854317.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:57.550Z,1478854317.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:57.565Z,1478854317.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:57.956Z,1478854317.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:57.971Z,1478854317.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:58.348Z,1478854318.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:58.364Z,1478854318.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:58.762Z,1478854318.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:58.849Z,1478854318.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:59.144Z,1478854319.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:59.172Z,1478854319.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:59.550Z,1478854319.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:59.569Z,1478854319.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:51:59.945Z,1478854319.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:51:59.968Z,1478854319.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:00.349Z,1478854320.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:00.364Z,1478854320.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:00.741Z,1478854320.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:00.776Z,1478854320.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:01.171Z,1478854321.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:01.186Z,1478854321.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:01.561Z,1478854321.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:01.576Z,1478854321.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:01.941Z,1478854321.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:01.974Z,1478854321.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:02.342Z,1478854322.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:02.368Z,1478854322.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:02.741Z,1478854322.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:02.777Z,1478854322.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:03.152Z,1478854323.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:03.197Z,1478854323.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:03.542Z,1478854323.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:03.577Z,1478854323.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:03.946Z,1478854323.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:03.977Z,1478854323.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:04.343Z,1478854324.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:04.385Z,1478854324.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:04.784Z,1478854324.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:04.831Z,1478854324.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:05.149Z,1478854325.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:05.185Z,1478854325.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:05.564Z,1478854325.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:05.591Z,1478854325.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:05.964Z,1478854325.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:05.988Z,1478854325.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:06.350Z,1478854326.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:06.377Z,1478854326.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:06.775Z,1478854326.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:06.852Z,1478854326.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:07.155Z,1478854327.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:07.205Z,1478854327.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:07.561Z,1478854327.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:07.576Z,1478854327.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:07.953Z,1478854327.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:07.977Z,1478854327.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:08.359Z,1478854328.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:08.374Z,1478854328.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:08.765Z,1478854328.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:08.823Z,1478854328.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:09.150Z,1478854329.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:09.181Z,1478854329.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:09.542Z,1478854329.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:09.581Z,1478854329.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:09.971Z,1478854329.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:10.017Z,1478854330.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:10.372Z,1478854330.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:10.405Z,1478854330.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:10.792Z,1478854330.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:10.856Z,1478854330.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:11.161Z,1478854331.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:11.209Z,1478854331.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:11.558Z,1478854331.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:11.573Z,1478854331.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:11.961Z,1478854331.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:11.981Z,1478854331.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:12.381Z,1478854332.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:12.413Z,1478854332.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:12.809Z,1478854332.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:12.833Z,1478854332.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:13.160Z,1478854333.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:13.184Z,1478854333.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:13.550Z,1478854333.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:13.581Z,1478854333.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:13.942Z,1478854333.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:13.957Z,1478854333.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:14.354Z,1478854334.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:14.377Z,1478854334.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:14.759Z,1478854334.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:14.774Z,1478854334.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:15.176Z,1478854335.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:15.207Z,1478854335.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:15.560Z,1478854335.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:15.588Z,1478854335.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:15.959Z,1478854335.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:15.975Z,1478854335.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:16.342Z,1478854336.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:16.377Z,1478854336.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:16.741Z,1478854336.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:16.779Z,1478854336.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:17.160Z,1478854337.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:17.197Z,1478854337.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:17.548Z,1478854337.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:17.577Z,1478854337.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:17.952Z,1478854337.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:17.980Z,1478854337.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:18.342Z,1478854338.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:18.374Z,1478854338.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:18.756Z,1478854338.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:18.788Z,1478854338.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:19.148Z,1478854339.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:19.191Z,1478854339.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:19.541Z,1478854339.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:19.570Z,1478854339.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:19.956Z,1478854339.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:19.994Z,1478854339.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:20.354Z,1478854340.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:20.393Z,1478854340.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:20.783Z,1478854340.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:20.799Z,1478854340.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:21.158Z,1478854341.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:21.190Z,1478854341.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:21.547Z,1478854341.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:21.567Z,1478854341.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:21.945Z,1478854341.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:21.997Z,1478854341.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:22.346Z,1478854342.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:22.382Z,1478854342.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:22.756Z,1478854342.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:22.780Z,1478854342.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:23.155Z,1478854343.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:23.219Z,1478854343.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:23.585Z,1478854343.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:23.613Z,1478854343.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:23.950Z,1478854343.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:23.990Z,1478854343.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:24.346Z,1478854344.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:24.361Z,1478854344.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:24.758Z,1478854344.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:24.803Z,1478854344.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:25.160Z,1478854345.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:25.206Z,1478854345.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:25.564Z,1478854345.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:25.599Z,1478854345.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:25.958Z,1478854345.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:25.973Z,1478854345.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:26.354Z,1478854346.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:26.373Z,1478854346.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:26.775Z,1478854346.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:26.829Z,1478854346.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:27.158Z,1478854347.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:27.173Z,1478854347.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:27.585Z,1478854347.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:27.614Z,1478854347.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:27.944Z,1478854347.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:27.968Z,1478854347.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:28.363Z,1478854348.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:28.378Z,1478854348.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:31.888Z,1478854351.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:31.924Z,1478854351.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:32.009Z,1478854352.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:32.041Z,1478854352.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:32.392Z,1478854352.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:32.407Z,1478854352.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:32.790Z,1478854352.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:32.809Z,1478854352.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:33.188Z,1478854353.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:33.203Z,1478854353.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:33.576Z,1478854353.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:33.609Z,1478854353.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:33.974Z,1478854353.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:34.006Z,1478854354.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:34.373Z,1478854354.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:34.412Z,1478854354.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:34.773Z,1478854354.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:34.813Z,1478854354.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:35.181Z,1478854355.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:35.220Z,1478854355.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:35.573Z,1478854355.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:35.621Z,1478854355.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:35.981Z,1478854355.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:36.014Z,1478854356.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:36.381Z,1478854356.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:36.401Z,1478854356.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:36.788Z,1478854356.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:36.825Z,1478854356.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:37.200Z,1478854357.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:37.269Z,1478854357.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:37.590Z,1478854357.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:37.609Z,1478854357.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:37.989Z,1478854357.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:38.049Z,1478854358.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:38.382Z,1478854358.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:38.414Z,1478854358.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:38.773Z,1478854358.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:38.825Z,1478854358.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:39.181Z,1478854359.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:39.239Z,1478854359.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:39.578Z,1478854359.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:39.618Z,1478854359.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:39.973Z,1478854359.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:40.006Z,1478854360.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:40.373Z,1478854360.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:40.417Z,1478854360.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:40.802Z,1478854360.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:40.835Z,1478854360.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:41.177Z,1478854361.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:41.213Z,1478854361.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:41.573Z,1478854361.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:41.614Z,1478854361.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:41.987Z,1478854361.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:42.025Z,1478854362.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:42.385Z,1478854362.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:42.422Z,1478854362.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:42.788Z,1478854362.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:42.817Z,1478854362.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:43.208Z,1478854363.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:43.225Z,1478854363.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:43.576Z,1478854363.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:43.609Z,1478854363.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:43.979Z,1478854363.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:44.006Z,1478854364.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:44.377Z,1478854364.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:44.435Z,1478854364.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:44.772Z,1478854364.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:44.788Z,1478854364.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:45.185Z,1478854365.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:45.221Z,1478854365.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:45.579Z,1478854365.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:45.605Z,1478854365.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:45.984Z,1478854365.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:46.029Z,1478854366.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:46.373Z,1478854366.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:46.415Z,1478854366.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:46.782Z,1478854366.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:46.812Z,1478854366.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:47.202Z,1478854367.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:47.217Z,1478854367.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:47.591Z,1478854367.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:47.625Z,1478854367.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:48.001Z,1478854368.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:48.065Z,1478854368.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:48.388Z,1478854368.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:48.420Z,1478854368.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:48.786Z,1478854368.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:48.826Z,1478854368.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:49.184Z,1478854369.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:49.229Z,1478854369.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:49.580Z,1478854369.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:49.626Z,1478854369.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:49.986Z,1478854369.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:50.060Z,1478854370.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:50.377Z,1478854370.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:50.426Z,1478854370.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:50.796Z,1478854370.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:50.836Z,1478854370.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:51.180Z,1478854371.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:51.209Z,1478854371.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:51.586Z,1478854371.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:51.636Z,1478854371.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:51.000Z,1478854372.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:52.028Z,1478854372.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:52.387Z,1478854372.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:52.426Z,1478854372.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:52.802Z,1478854372.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:52.840Z,1478854372.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:53.180Z,1478854373.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:53.213Z,1478854373.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:53.578Z,1478854373.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:53.612Z,1478854373.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:53.976Z,1478854373.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:54.022Z,1478854374.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:54.405Z,1478854374.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:54.414Z,1478854374.414 [BPC1](ERROR): Failed to receive battery data
2016-11-11T08:52:54.414Z,1478854374.414 [BPC1] Communications Fault, FailCount= 1
2016-11-11T08:52:54.414Z,1478854374.414 [BPC1](ERROR): Communications Fault
2016-11-11T08:52:54.438Z,1478854374.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:54.525Z,1478854374.525 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T08:52:54.823Z,1478854374.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:54.851Z,1478854374.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:55.189Z,1478854375.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:55.217Z,1478854375.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:55.592Z,1478854375.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:55.655Z,1478854375.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:55.674Z,1478854375.674 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:52:55.675Z,1478854375.675 [BPC1] No Fault, FailCount= 1
2016-11-11T08:52:55.973Z,1478854375.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:55.998Z,1478854375.997 [PNI_TCM](ERROR): CRC does not match. Expected:0x26916 got:0x0
2016-11-11T08:52:56.093Z,1478854376.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:56.375Z,1478854376.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:56.425Z,1478854376.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:56.780Z,1478854376.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:56.812Z,1478854376.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:57.054Z,1478854377.054 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T08:52:57.054Z,1478854377.054 [Rowe_600LCM] Communications Fault, FailCount= 1
2016-11-11T08:52:57.054Z,1478854377.054 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T08:52:57.209Z,1478854377.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:57.232Z,1478854377.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T08:52:57.233Z,1478854377.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:57.310Z,1478854377.309 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T08:52:57.459Z,1478854377.459 [Rowe_600LCM](INFO): Powering down
2016-11-11T08:52:57.605Z,1478854377.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:57.637Z,1478854377.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T08:52:57.638Z,1478854377.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:57.975Z,1478854377.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:58.028Z,1478854378.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:52:58.029Z,1478854378.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:58.377Z,1478854378.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:58.429Z,1478854378.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:52:58.430Z,1478854378.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:58.776Z,1478854378.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:58.813Z,1478854378.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:52:58.814Z,1478854378.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:58.901Z,1478854378.901 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T08:52:58.901Z,1478854378.901 [Rowe_600LCM] No Fault, FailCount= 1
2016-11-11T08:52:59.095Z,1478854379.095 [Rowe_600LCM](INFO): Initializing
2016-11-11T08:52:59.096Z,1478854379.096 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T08:52:59.096Z,1478854379.096 [Rowe_600LCM](INFO): LCM OK
2016-11-11T08:52:59.096Z,1478854379.096 [Rowe_600LCM](INFO): Powering up
2016-11-11T08:52:59.191Z,1478854379.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:59.224Z,1478854379.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:52:59.225Z,1478854379.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:59.586Z,1478854379.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:52:59.637Z,1478854379.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:52:59.638Z,1478854379.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:52:59.976Z,1478854379.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:00.028Z,1478854380.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T08:53:00.030Z,1478854380.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:00.385Z,1478854380.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:00.430Z,1478854380.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T08:53:00.439Z,1478854380.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:00.786Z,1478854380.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:00.817Z,1478854380.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T08:53:00.818Z,1478854380.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:01.177Z,1478854381.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:01.213Z,1478854381.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T08:53:01.214Z,1478854381.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:01.615Z,1478854381.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:01.655Z,1478854381.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T08:53:01.664Z,1478854381.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:01.975Z,1478854381.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:02.025Z,1478854382.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T08:53:02.026Z,1478854382.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:02.381Z,1478854382.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:02.387Z,1478854382.387 [PNI_TCM](ERROR): CRC does not match. Expected:0x51078 got:0x30972
2016-11-11T08:53:02.421Z,1478854382.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T08:53:02.422Z,1478854382.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:02.787Z,1478854382.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:02.806Z,1478854382.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T08:53:02.812Z,1478854382.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:03.216Z,1478854383.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:03.239Z,1478854383.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T08:53:03.252Z,1478854383.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:03.464Z,1478854383.464 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T08:53:03.583Z,1478854383.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:03.614Z,1478854383.614 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T08:53:03.617Z,1478854383.617 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T08:53:03.618Z,1478854383.618 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T08:53:03.619Z,1478854383.619 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T08:53:03.629Z,1478854383.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T08:53:03.630Z,1478854383.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:03.987Z,1478854383.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:04.006Z,1478854384.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T08:53:04.012Z,1478854384.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:04.381Z,1478854384.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:04.430Z,1478854384.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:04.788Z,1478854384.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:04.844Z,1478854384.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:05.176Z,1478854385.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:05.213Z,1478854385.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:05.576Z,1478854385.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:05.621Z,1478854385.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:05.978Z,1478854385.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:06.011Z,1478854386.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:06.374Z,1478854386.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:06.411Z,1478854386.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:06.778Z,1478854386.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:06.823Z,1478854386.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:07.176Z,1478854387.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:07.232Z,1478854387.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:07.589Z,1478854387.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:07.663Z,1478854387.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:07.983Z,1478854387.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:08.061Z,1478854388.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:08.387Z,1478854388.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:08.414Z,1478854388.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:08.786Z,1478854388.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:08.814Z,1478854388.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:09.184Z,1478854389.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:09.207Z,1478854389.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:09.575Z,1478854389.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:09.667Z,1478854389.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:09.986Z,1478854389.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:10.032Z,1478854390.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:10.386Z,1478854390.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:10.410Z,1478854390.410 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:10.410Z,1478854390.410 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2016-11-11T08:53:10.410Z,1478854390.410 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:53:10.449Z,1478854390.449 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:10.449Z,1478854390.450 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 62
2016-11-11T08:53:10.450Z,1478854390.450 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:53:10.460Z,1478854390.460 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:10.460Z,1478854390.460 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 62
2016-11-11T08:53:10.460Z,1478854390.460 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:53:10.500Z,1478854390.500 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:53:10.500Z,1478854390.500 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:53:10.500Z,1478854390.500 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:53:10.783Z,1478854390.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:10.891Z,1478854390.891 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:53:10.891Z,1478854390.891 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2016-11-11T08:53:10.892Z,1478854390.892 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:53:10.892Z,1478854390.892 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 62
2016-11-11T08:53:10.893Z,1478854390.893 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:53:10.893Z,1478854390.893 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 62
2016-11-11T08:53:11.180Z,1478854391.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:11.206Z,1478854391.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:53:11.215Z,1478854391.215 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:53:11.216Z,1478854391.216 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:53:11.229Z,1478854391.229 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:53:11.230Z,1478854391.230 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:53:11.230Z,1478854391.230 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:53:11.230Z,1478854391.230 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:53:11.231Z,1478854391.231 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:53:11.240Z,1478854391.240 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:53:11.587Z,1478854391.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:11.635Z,1478854391.635 [BPC1](ERROR): Failed to receive battery data
2016-11-11T08:53:11.643Z,1478854391.644 [BPC1] Communications Fault, FailCount= 2
2016-11-11T08:53:11.644Z,1478854391.644 [BPC1](ERROR): Communications Fault
2016-11-11T08:53:11.677Z,1478854391.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:11.751Z,1478854391.751 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T08:53:11.977Z,1478854391.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:12.024Z,1478854392.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:12.375Z,1478854392.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:12.428Z,1478854392.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:12.758Z,1478854392.758 [NAL9602](INFO): SBD MO Status=2, MOMSN=341, MT Status=2, MTMSN=0
2016-11-11T08:53:12.758Z,1478854392.758 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T08:53:12.775Z,1478854392.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:12.813Z,1478854392.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:12.879Z,1478854392.879 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:53:12.879Z,1478854392.879 [BPC1] No Fault, FailCount= 2
2016-11-11T08:53:13.190Z,1478854393.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:13.262Z,1478854393.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:13.593Z,1478854393.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:13.651Z,1478854393.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:13.973Z,1478854393.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:14.048Z,1478854394.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:14.373Z,1478854394.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:14.408Z,1478854394.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:14.775Z,1478854394.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:14.803Z,1478854394.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:15.175Z,1478854395.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:15.206Z,1478854395.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:15.608Z,1478854395.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:15.661Z,1478854395.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:15.976Z,1478854395.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:16.009Z,1478854396.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:16.386Z,1478854396.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:16.402Z,1478854396.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:16.782Z,1478854396.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:16.801Z,1478854396.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:17.194Z,1478854397.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:17.243Z,1478854397.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:17.591Z,1478854397.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:17.606Z,1478854397.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:17.977Z,1478854397.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:18.014Z,1478854398.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:18.398Z,1478854398.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:18.421Z,1478854398.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:18.784Z,1478854398.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:18.827Z,1478854398.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:19.180Z,1478854399.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:19.195Z,1478854399.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:19.582Z,1478854399.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:19.598Z,1478854399.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:20.003Z,1478854400.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:20.051Z,1478854400.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:20.382Z,1478854400.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:20.397Z,1478854400.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:20.781Z,1478854400.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:20.801Z,1478854400.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:21.181Z,1478854401.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:21.197Z,1478854401.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:21.586Z,1478854401.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:21.600Z,1478854401.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:21.999Z,1478854401.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:22.052Z,1478854402.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:22.377Z,1478854402.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:22.409Z,1478854402.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:22.774Z,1478854402.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:22.789Z,1478854402.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:23.177Z,1478854403.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:23.193Z,1478854403.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:23.669Z,1478854403.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:23.688Z,1478854403.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:23.981Z,1478854403.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:23.997Z,1478854403.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:24.381Z,1478854404.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:24.433Z,1478854404.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:24.781Z,1478854404.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:24.796Z,1478854404.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:25.188Z,1478854405.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:25.209Z,1478854405.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:25.603Z,1478854405.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:25.649Z,1478854405.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:25.977Z,1478854405.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:26.037Z,1478854406.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:26.373Z,1478854406.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:26.406Z,1478854406.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:26.773Z,1478854406.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:26.821Z,1478854406.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:27.195Z,1478854407.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:27.252Z,1478854407.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:27.632Z,1478854407.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:27.673Z,1478854407.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:27.973Z,1478854407.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:28.009Z,1478854408.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:28.373Z,1478854408.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:28.409Z,1478854408.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:32.107Z,1478854412.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:32.122Z,1478854412.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:32.228Z,1478854412.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:32.261Z,1478854412.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:32.613Z,1478854412.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:32.628Z,1478854412.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:33.013Z,1478854413.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:33.028Z,1478854413.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:33.406Z,1478854413.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:33.422Z,1478854413.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:33.817Z,1478854413.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:33.833Z,1478854413.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:34.209Z,1478854414.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:34.229Z,1478854414.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:34.609Z,1478854414.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:34.629Z,1478854414.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:35.009Z,1478854415.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:35.029Z,1478854415.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:35.410Z,1478854415.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:35.425Z,1478854415.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:35.828Z,1478854415.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:35.844Z,1478854415.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:36.220Z,1478854416.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:36.241Z,1478854416.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:36.613Z,1478854416.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:36.633Z,1478854416.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:37.009Z,1478854417.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:37.029Z,1478854417.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:37.413Z,1478854417.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:37.428Z,1478854417.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:37.809Z,1478854417.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:37.849Z,1478854417.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:38.213Z,1478854418.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:38.233Z,1478854418.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:38.618Z,1478854418.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:38.634Z,1478854418.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:39.013Z,1478854419.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:39.028Z,1478854419.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:39.413Z,1478854419.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:39.449Z,1478854419.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:39.813Z,1478854419.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:39.828Z,1478854419.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:40.214Z,1478854420.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:40.229Z,1478854420.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:40.609Z,1478854420.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:40.657Z,1478854420.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:41.013Z,1478854421.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:41.033Z,1478854421.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:41.410Z,1478854421.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:41.457Z,1478854421.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:41.813Z,1478854421.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:41.861Z,1478854421.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:42.209Z,1478854422.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:42.247Z,1478854422.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:42.614Z,1478854422.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:42.629Z,1478854422.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:43.013Z,1478854423.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:43.033Z,1478854423.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:43.413Z,1478854423.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:43.433Z,1478854423.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:43.814Z,1478854423.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:43.829Z,1478854423.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:44.206Z,1478854424.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:44.222Z,1478854424.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:44.627Z,1478854424.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:44.642Z,1478854424.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:45.028Z,1478854425.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:45.043Z,1478854425.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:45.413Z,1478854425.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:45.433Z,1478854425.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:45.809Z,1478854425.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:45.829Z,1478854425.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:46.218Z,1478854426.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:46.233Z,1478854426.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:46.609Z,1478854426.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:46.629Z,1478854426.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:47.013Z,1478854427.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:47.028Z,1478854427.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:47.407Z,1478854427.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:47.429Z,1478854427.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:47.813Z,1478854427.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:47.833Z,1478854427.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:48.223Z,1478854428.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:48.238Z,1478854428.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:48.628Z,1478854428.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:48.643Z,1478854428.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:49.024Z,1478854429.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:49.040Z,1478854429.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:49.413Z,1478854429.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:49.428Z,1478854429.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:49.809Z,1478854429.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:49.829Z,1478854429.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:50.213Z,1478854430.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:50.233Z,1478854430.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:50.613Z,1478854430.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:50.633Z,1478854430.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:51.018Z,1478854431.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:51.033Z,1478854431.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:51.413Z,1478854431.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:51.433Z,1478854431.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:51.809Z,1478854431.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:51.824Z,1478854431.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:52.214Z,1478854432.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:52.229Z,1478854432.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:52.610Z,1478854432.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:52.688Z,1478854432.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:53.028Z,1478854433.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:53.069Z,1478854433.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:53.428Z,1478854433.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:53.444Z,1478854433.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:53.809Z,1478854433.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:53.849Z,1478854433.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:54.213Z,1478854434.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:54.228Z,1478854434.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:54.615Z,1478854434.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:54.686Z,1478854434.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:55.011Z,1478854435.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:55.045Z,1478854435.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:55.423Z,1478854435.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:55.469Z,1478854435.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:55.810Z,1478854435.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:55.858Z,1478854435.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:56.210Z,1478854436.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:56.229Z,1478854436.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:56.610Z,1478854436.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:56.637Z,1478854436.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:57.010Z,1478854437.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:57.037Z,1478854437.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:57.424Z,1478854437.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:57.450Z,1478854437.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:57.821Z,1478854437.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:57.845Z,1478854437.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:58.210Z,1478854438.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:58.229Z,1478854438.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:58.610Z,1478854438.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:58.637Z,1478854438.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:59.010Z,1478854439.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:59.037Z,1478854439.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:59.411Z,1478854439.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:59.434Z,1478854439.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:53:59.811Z,1478854439.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:53:59.834Z,1478854439.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:00.210Z,1478854440.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:00.229Z,1478854440.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:00.609Z,1478854440.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:00.641Z,1478854440.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:01.009Z,1478854441.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:01.045Z,1478854441.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:01.409Z,1478854441.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:01.443Z,1478854441.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:01.819Z,1478854441.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:01.841Z,1478854441.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:02.220Z,1478854442.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:02.236Z,1478854442.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:02.621Z,1478854442.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:02.645Z,1478854442.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:03.009Z,1478854443.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:03.046Z,1478854443.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:03.409Z,1478854443.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:03.437Z,1478854443.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:03.813Z,1478854443.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:03.859Z,1478854443.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:04.217Z,1478854444.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:04.237Z,1478854444.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:04.613Z,1478854444.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:04.633Z,1478854444.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:05.017Z,1478854445.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:05.032Z,1478854445.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:05.418Z,1478854445.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:05.432Z,1478854445.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:05.818Z,1478854445.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:05.845Z,1478854445.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:06.209Z,1478854446.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:06.245Z,1478854446.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:06.613Z,1478854446.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:06.691Z,1478854446.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:07.016Z,1478854447.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:07.043Z,1478854447.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:07.417Z,1478854447.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:07.437Z,1478854447.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:07.809Z,1478854447.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:07.845Z,1478854447.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:08.213Z,1478854448.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:08.271Z,1478854448.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:08.609Z,1478854448.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:08.633Z,1478854448.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:09.018Z,1478854449.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:09.037Z,1478854449.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:09.412Z,1478854449.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:09.465Z,1478854449.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:09.821Z,1478854449.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:09.842Z,1478854449.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:10.232Z,1478854450.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:10.279Z,1478854450.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:10.631Z,1478854450.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:10.686Z,1478854450.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:11.009Z,1478854451.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:11.043Z,1478854451.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:11.409Z,1478854451.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:11.445Z,1478854451.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:11.821Z,1478854451.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:11.863Z,1478854451.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:12.213Z,1478854452.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:12.236Z,1478854452.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:12.618Z,1478854452.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:12.633Z,1478854452.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:13.012Z,1478854453.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:13.040Z,1478854453.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:13.417Z,1478854453.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:13.438Z,1478854453.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:13.809Z,1478854453.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:13.844Z,1478854453.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:14.209Z,1478854454.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:14.241Z,1478854454.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:14.631Z,1478854454.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:14.648Z,1478854454.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:15.032Z,1478854455.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:15.053Z,1478854455.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:15.409Z,1478854455.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:15.445Z,1478854455.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:15.809Z,1478854455.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:15.837Z,1478854455.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:16.209Z,1478854456.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:16.237Z,1478854456.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:16.612Z,1478854456.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:16.642Z,1478854456.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:17.019Z,1478854457.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:17.040Z,1478854457.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:17.409Z,1478854457.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:17.441Z,1478854457.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:17.809Z,1478854457.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:17.837Z,1478854457.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:18.209Z,1478854458.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:18.230Z,1478854458.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:18.614Z,1478854458.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:18.641Z,1478854458.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:19.009Z,1478854459.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:19.041Z,1478854459.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:19.409Z,1478854459.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:19.448Z,1478854459.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:19.818Z,1478854459.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:19.859Z,1478854459.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:20.236Z,1478854460.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:20.269Z,1478854460.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:20.624Z,1478854460.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:20.657Z,1478854460.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:21.017Z,1478854461.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:21.032Z,1478854461.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:21.413Z,1478854461.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:21.469Z,1478854461.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:21.821Z,1478854461.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:21.841Z,1478854461.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:22.217Z,1478854462.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:22.237Z,1478854462.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:22.621Z,1478854462.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:22.640Z,1478854462.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:23.017Z,1478854463.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:23.078Z,1478854463.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:23.409Z,1478854463.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:23.444Z,1478854463.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:23.825Z,1478854463.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:23.877Z,1478854463.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:24.225Z,1478854464.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:24.244Z,1478854464.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:24.633Z,1478854464.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:24.681Z,1478854464.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:25.030Z,1478854465.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:25.089Z,1478854465.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:25.420Z,1478854465.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:25.448Z,1478854465.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:25.809Z,1478854465.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:25.854Z,1478854465.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:26.222Z,1478854466.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:26.259Z,1478854466.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:26.613Z,1478854466.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:26.661Z,1478854466.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:27.018Z,1478854467.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:27.032Z,1478854467.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:27.413Z,1478854467.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:27.438Z,1478854467.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:27.826Z,1478854467.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:27.841Z,1478854467.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:28.217Z,1478854468.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:28.253Z,1478854468.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:28.616Z,1478854468.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:28.640Z,1478854468.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:32.052Z,1478854472.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:32.078Z,1478854472.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:32.191Z,1478854472.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:32.231Z,1478854472.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:32.545Z,1478854472.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:32.560Z,1478854472.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:32.944Z,1478854472.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:32.965Z,1478854472.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:33.337Z,1478854473.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:33.358Z,1478854473.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:33.741Z,1478854473.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:33.758Z,1478854473.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:34.137Z,1478854474.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:34.153Z,1478854474.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:34.532Z,1478854474.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:34.565Z,1478854474.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:34.946Z,1478854474.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:34.961Z,1478854474.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:35.329Z,1478854475.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:35.364Z,1478854475.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:35.742Z,1478854475.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:35.768Z,1478854475.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:36.137Z,1478854476.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:36.186Z,1478854476.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:36.552Z,1478854476.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:36.577Z,1478854476.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:36.940Z,1478854476.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:36.974Z,1478854476.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:37.356Z,1478854477.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:37.414Z,1478854477.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:37.748Z,1478854477.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:37.763Z,1478854477.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:38.129Z,1478854478.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:38.162Z,1478854478.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:38.537Z,1478854478.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:38.611Z,1478854478.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:38.929Z,1478854478.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:38.962Z,1478854478.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:39.329Z,1478854479.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:39.377Z,1478854479.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:39.737Z,1478854479.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:39.793Z,1478854479.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:40.130Z,1478854480.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:40.149Z,1478854480.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:40.533Z,1478854480.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:40.569Z,1478854480.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:40.938Z,1478854480.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:40.957Z,1478854480.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:41.343Z,1478854481.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:41.383Z,1478854481.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:41.752Z,1478854481.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:41.805Z,1478854481.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:42.132Z,1478854482.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:42.166Z,1478854482.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:42.537Z,1478854482.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:42.552Z,1478854482.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:42.932Z,1478854482.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:42.964Z,1478854482.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:43.340Z,1478854483.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:43.356Z,1478854483.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:43.744Z,1478854483.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:43.765Z,1478854483.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:44.129Z,1478854484.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:44.169Z,1478854484.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:44.543Z,1478854484.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:44.578Z,1478854484.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:44.944Z,1478854484.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:44.979Z,1478854484.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:45.329Z,1478854485.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:45.349Z,1478854485.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:45.733Z,1478854485.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:45.753Z,1478854485.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:46.129Z,1478854486.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:46.156Z,1478854486.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:46.529Z,1478854486.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:46.569Z,1478854486.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:46.929Z,1478854486.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:46.974Z,1478854486.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:47.329Z,1478854487.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:47.345Z,1478854487.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:47.733Z,1478854487.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:47.762Z,1478854487.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:48.137Z,1478854488.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:48.166Z,1478854488.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:48.533Z,1478854488.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:48.548Z,1478854488.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:48.934Z,1478854488.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:48.953Z,1478854488.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:49.337Z,1478854489.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:49.357Z,1478854489.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:49.736Z,1478854489.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:49.752Z,1478854489.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:50.132Z,1478854490.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:50.166Z,1478854490.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:50.532Z,1478854490.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:50.589Z,1478854490.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:50.929Z,1478854490.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:50.956Z,1478854490.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:51.329Z,1478854491.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:51.361Z,1478854491.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:51.729Z,1478854491.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:51.749Z,1478854491.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:52.129Z,1478854492.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:52.197Z,1478854492.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:52.535Z,1478854492.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:52.554Z,1478854492.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:52.938Z,1478854492.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:52.996Z,1478854492.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:53.344Z,1478854493.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:53.365Z,1478854493.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:53.740Z,1478854493.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:53.823Z,1478854493.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:54.140Z,1478854494.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:54.198Z,1478854494.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:54.529Z,1478854494.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:54.565Z,1478854494.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:54.930Z,1478854494.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:54.962Z,1478854494.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:55.329Z,1478854495.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:55.361Z,1478854495.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:55.729Z,1478854495.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:55.755Z,1478854495.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:56.129Z,1478854496.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:56.161Z,1478854496.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:56.529Z,1478854496.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:56.565Z,1478854496.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:56.929Z,1478854496.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:56.966Z,1478854496.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:57.352Z,1478854497.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:57.368Z,1478854497.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:57.751Z,1478854497.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:57.766Z,1478854497.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:58.137Z,1478854498.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:58.152Z,1478854498.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:58.535Z,1478854498.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:58.551Z,1478854498.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:58.940Z,1478854498.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:58.956Z,1478854498.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:59.338Z,1478854499.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:59.352Z,1478854499.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:54:59.732Z,1478854499.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:54:59.768Z,1478854499.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:00.133Z,1478854500.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:00.158Z,1478854500.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:00.529Z,1478854500.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:00.566Z,1478854500.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:00.929Z,1478854500.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:00.965Z,1478854500.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:01.333Z,1478854501.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:01.371Z,1478854501.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:01.751Z,1478854501.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:01.776Z,1478854501.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:02.140Z,1478854502.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:02.168Z,1478854502.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:02.534Z,1478854502.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:02.550Z,1478854502.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:02.941Z,1478854502.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:02.956Z,1478854502.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:03.332Z,1478854503.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:03.360Z,1478854503.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:03.744Z,1478854503.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:03.760Z,1478854503.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:04.145Z,1478854504.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:04.161Z,1478854504.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:04.529Z,1478854504.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:04.589Z,1478854504.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:04.929Z,1478854504.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:04.971Z,1478854504.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:05.329Z,1478854505.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:05.366Z,1478854505.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:05.728Z,1478854505.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:05.775Z,1478854505.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:06.137Z,1478854506.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:06.193Z,1478854506.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:06.536Z,1478854506.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:06.552Z,1478854506.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:06.933Z,1478854506.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:06.987Z,1478854506.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:07.337Z,1478854507.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:07.357Z,1478854507.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:07.729Z,1478854507.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:07.778Z,1478854507.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:08.130Z,1478854508.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:08.165Z,1478854508.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:08.530Z,1478854508.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:08.576Z,1478854508.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:08.930Z,1478854508.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:08.971Z,1478854508.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:09.334Z,1478854509.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:09.376Z,1478854509.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:09.742Z,1478854509.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:09.757Z,1478854509.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:10.141Z,1478854510.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:10.161Z,1478854510.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:10.545Z,1478854510.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:10.563Z,1478854510.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:10.942Z,1478854510.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:10.991Z,1478854510.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:11.338Z,1478854511.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:11.353Z,1478854511.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:11.738Z,1478854511.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:11.754Z,1478854511.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:12.133Z,1478854512.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:12.162Z,1478854512.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:12.529Z,1478854512.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:12.566Z,1478854512.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:12.929Z,1478854512.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:12.961Z,1478854512.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:13.329Z,1478854513.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:13.361Z,1478854513.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:13.729Z,1478854513.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:13.801Z,1478854513.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:14.129Z,1478854514.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:14.168Z,1478854514.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:14.544Z,1478854514.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:14.579Z,1478854514.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:14.944Z,1478854514.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:14.977Z,1478854514.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:15.333Z,1478854515.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:15.372Z,1478854515.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:15.732Z,1478854515.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:15.761Z,1478854515.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:16.156Z,1478854516.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:16.174Z,1478854516.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:16.544Z,1478854516.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:16.577Z,1478854516.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:16.929Z,1478854516.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:16.974Z,1478854516.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:17.334Z,1478854517.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:17.365Z,1478854517.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:17.729Z,1478854517.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:17.770Z,1478854517.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:18.137Z,1478854518.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:18.177Z,1478854518.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:18.530Z,1478854518.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:18.545Z,1478854518.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:18.933Z,1478854518.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:18.952Z,1478854518.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:19.336Z,1478854519.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:19.351Z,1478854519.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:19.742Z,1478854519.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:19.805Z,1478854519.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:20.129Z,1478854520.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:20.171Z,1478854520.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:20.529Z,1478854520.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:20.561Z,1478854520.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:20.938Z,1478854520.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:20.953Z,1478854520.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:21.332Z,1478854521.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:21.393Z,1478854521.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:21.736Z,1478854521.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:21.756Z,1478854521.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:22.141Z,1478854522.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:22.194Z,1478854522.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:22.529Z,1478854522.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:22.572Z,1478854522.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:22.929Z,1478854522.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:23.001Z,1478854523.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:23.329Z,1478854523.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:23.365Z,1478854523.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:23.748Z,1478854523.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:23.773Z,1478854523.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:24.133Z,1478854524.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:24.176Z,1478854524.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:24.299Z,1478854524.299 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T08:55:24.299Z,1478854524.299 [Rowe_600LCM] Communications Fault, FailCount= 2
2016-11-11T08:55:24.299Z,1478854524.299 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T08:55:24.544Z,1478854524.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:24.582Z,1478854524.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T08:55:24.584Z,1478854524.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:24.603Z,1478854524.603 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T08:55:24.705Z,1478854524.705 [Rowe_600LCM](INFO): Powering down
2016-11-11T08:55:24.942Z,1478854524.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:24.970Z,1478854524.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T08:55:24.975Z,1478854524.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:25.335Z,1478854525.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:25.356Z,1478854525.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:55:25.357Z,1478854525.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:25.733Z,1478854525.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:25.776Z,1478854525.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:55:25.777Z,1478854525.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:26.133Z,1478854526.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:26.151Z,1478854526.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:55:26.153Z,1478854526.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:26.193Z,1478854526.193 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T08:55:26.193Z,1478854526.194 [Rowe_600LCM] No Fault, FailCount= 2
2016-11-11T08:55:26.343Z,1478854526.343 [Rowe_600LCM](INFO): Initializing
2016-11-11T08:55:26.344Z,1478854526.344 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T08:55:26.344Z,1478854526.344 [Rowe_600LCM](INFO): LCM OK
2016-11-11T08:55:26.344Z,1478854526.344 [Rowe_600LCM](INFO): Powering up
2016-11-11T08:55:26.543Z,1478854526.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:26.557Z,1478854526.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:55:26.558Z,1478854526.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:26.939Z,1478854526.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:26.953Z,1478854526.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:55:26.955Z,1478854526.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:27.332Z,1478854527.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:27.366Z,1478854527.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T08:55:27.367Z,1478854527.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:27.736Z,1478854527.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:27.754Z,1478854527.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T08:55:27.755Z,1478854527.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:27.764Z,1478854527.764 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T08:50:27.5Z
2016-11-11T08:55:27.764Z,1478854527.764 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T08:55:27.765Z,1478854527.764 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T08:55:28.150Z,1478854528.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:28.168Z,1478854528.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T08:55:28.169Z,1478854528.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:28.998Z,1478854528.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:29.013Z,1478854529.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T08:55:29.014Z,1478854529.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:29.129Z,1478854529.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:29.169Z,1478854529.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2016-11-11T08:55:29.170Z,1478854529.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:30.544Z,1478854530.545 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T08:55:30.644Z,1478854530.644 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T08:55:30.645Z,1478854530.645 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T08:55:30.646Z,1478854530.646 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T08:55:30.647Z,1478854530.647 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T08:55:32.728Z,1478854532.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:32.764Z,1478854532.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:32.818Z,1478854532.818 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0096.lzma
2016-11-11T08:55:32.846Z,1478854532.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:32.886Z,1478854532.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:33.225Z,1478854533.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:33.241Z,1478854533.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:33.597Z,1478854533.597 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0096.lzma.bak
2016-11-11T08:55:33.597Z,1478854533.597 [DataOverHttps](INFO): SBD MOMSN=4555250
2016-11-11T08:55:33.626Z,1478854533.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:33.648Z,1478854533.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:34.982Z,1478854534.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:35.070Z,1478854535.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:35.167Z,1478854535.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:35.206Z,1478854535.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:38.660Z,1478854538.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:38.701Z,1478854538.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:38.816Z,1478854538.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:38.856Z,1478854538.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:39.162Z,1478854539.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:39.209Z,1478854539.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:39.558Z,1478854539.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:39.623Z,1478854539.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:39.958Z,1478854539.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:39.989Z,1478854539.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:40.437Z,1478854540.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:40.458Z,1478854540.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:43.784Z,1478854543.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:43.826Z,1478854543.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:43.891Z,1478854543.891 [DataOverHttps](INFO): Sending 232 bytes from file Logs/20161111T044527/Express0097.lzma
2016-11-11T08:55:43.935Z,1478854543.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:43.972Z,1478854543.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:44.301Z,1478854544.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:44.381Z,1478854544.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:44.710Z,1478854544.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:44.765Z,1478854544.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:45.081Z,1478854545.081 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0097.lzma.bak
2016-11-11T08:55:45.081Z,1478854545.081 [DataOverHttps](INFO): SBD MOMSN=4555252
2016-11-11T08:55:45.116Z,1478854545.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:45.163Z,1478854545.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:46.485Z,1478854546.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:46.520Z,1478854546.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:46.532Z,1478854546.532 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T08:55:46.532Z,1478854546.532 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T08:55:46.532Z,1478854546.532 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T08:55:46.611Z,1478854546.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:46.643Z,1478854546.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:49.948Z,1478854549.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:49.969Z,1478854549.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:50.072Z,1478854550.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:50.099Z,1478854550.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:50.469Z,1478854550.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:50.509Z,1478854550.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:50.866Z,1478854550.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:50.882Z,1478854550.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:51.265Z,1478854551.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:51.328Z,1478854551.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:51.665Z,1478854551.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:51.735Z,1478854551.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:52.065Z,1478854552.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:52.081Z,1478854552.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:52.460Z,1478854552.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:52.512Z,1478854552.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:52.532Z,1478854552.532 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T08:55:52.871Z,1478854552.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:52.887Z,1478854552.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:53.265Z,1478854553.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:53.324Z,1478854553.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:53.660Z,1478854553.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:53.715Z,1478854553.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:54.068Z,1478854554.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:54.087Z,1478854554.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:54.457Z,1478854554.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:54.492Z,1478854554.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:54.857Z,1478854554.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:54.882Z,1478854554.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:55.265Z,1478854555.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:55.291Z,1478854555.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:55.657Z,1478854555.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:55.701Z,1478854555.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:56.058Z,1478854556.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:56.112Z,1478854556.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:56.457Z,1478854556.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:56.504Z,1478854556.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:56.866Z,1478854556.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:56.897Z,1478854556.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:57.257Z,1478854557.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:57.298Z,1478854557.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:57.672Z,1478854557.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:57.712Z,1478854557.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:58.072Z,1478854558.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:58.107Z,1478854558.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:58.462Z,1478854558.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:58.503Z,1478854558.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:58.860Z,1478854558.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:58.902Z,1478854558.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:59.264Z,1478854559.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:59.290Z,1478854559.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:55:59.661Z,1478854559.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:55:59.686Z,1478854559.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:00.064Z,1478854560.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:00.086Z,1478854560.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:00.470Z,1478854560.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:00.485Z,1478854560.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:00.869Z,1478854560.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:00.904Z,1478854560.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:01.257Z,1478854561.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:01.293Z,1478854561.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:01.657Z,1478854561.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:01.693Z,1478854561.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:02.084Z,1478854562.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:02.111Z,1478854562.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:02.468Z,1478854562.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:02.502Z,1478854562.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:02.849Z,1478854562.849 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T08:56:02.866Z,1478854562.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:02.885Z,1478854562.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:03.265Z,1478854563.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:03.284Z,1478854563.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:03.665Z,1478854563.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:03.685Z,1478854563.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:04.061Z,1478854564.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:04.087Z,1478854564.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:04.464Z,1478854564.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:04.487Z,1478854564.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:04.871Z,1478854564.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:04.893Z,1478854564.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:05.259Z,1478854565.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:05.285Z,1478854565.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:05.664Z,1478854565.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:05.753Z,1478854565.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:06.057Z,1478854566.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:06.096Z,1478854566.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:06.457Z,1478854566.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:06.506Z,1478854566.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:06.867Z,1478854566.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:06.892Z,1478854566.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:07.265Z,1478854567.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:07.332Z,1478854567.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:07.657Z,1478854567.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:07.721Z,1478854567.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:08.057Z,1478854568.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:08.092Z,1478854568.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:08.440Z,1478854568.441 [NAL9602](INFO): Powering down
2016-11-11T08:56:08.462Z,1478854568.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:08.509Z,1478854568.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:08.857Z,1478854568.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:08.899Z,1478854568.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:09.261Z,1478854569.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:09.301Z,1478854569.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:09.658Z,1478854569.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:09.704Z,1478854569.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:10.059Z,1478854570.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:10.074Z,1478854570.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:10.469Z,1478854570.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:10.505Z,1478854570.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:10.866Z,1478854570.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:10.875Z,1478854570.875 [PNI_TCM](ERROR): CRC does not match. Expected:0x53 got:0x16829
2016-11-11T08:56:10.908Z,1478854570.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:11.259Z,1478854571.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:11.295Z,1478854571.295 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:11.295Z,1478854571.295 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2016-11-11T08:56:11.295Z,1478854571.295 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:56:11.302Z,1478854571.302 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:11.302Z,1478854571.302 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 63
2016-11-11T08:56:11.302Z,1478854571.302 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:56:11.311Z,1478854571.311 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:11.311Z,1478854571.311 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 63
2016-11-11T08:56:11.311Z,1478854571.311 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:56:11.344Z,1478854571.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:56:11.344Z,1478854571.344 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:56:11.345Z,1478854571.345 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:56:11.671Z,1478854571.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:11.703Z,1478854571.703 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:56:11.703Z,1478854571.703 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2016-11-11T08:56:11.704Z,1478854571.704 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:56:11.704Z,1478854571.704 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 63
2016-11-11T08:56:11.705Z,1478854571.705 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:56:11.705Z,1478854571.705 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 63
2016-11-11T08:56:12.057Z,1478854572.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:12.087Z,1478854572.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:56:12.088Z,1478854572.088 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:56:12.088Z,1478854572.088 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:56:12.093Z,1478854572.093 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:56:12.093Z,1478854572.093 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:56:12.094Z,1478854572.093 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:56:12.094Z,1478854572.094 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:56:12.094Z,1478854572.094 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:56:12.095Z,1478854572.095 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:56:12.457Z,1478854572.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:12.491Z,1478854572.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:12.867Z,1478854572.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:12.897Z,1478854572.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:13.266Z,1478854573.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:13.297Z,1478854573.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:13.657Z,1478854573.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:13.694Z,1478854573.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:14.062Z,1478854574.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:14.096Z,1478854574.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:14.459Z,1478854574.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:14.504Z,1478854574.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:14.866Z,1478854574.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:14.889Z,1478854574.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:15.261Z,1478854575.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:15.301Z,1478854575.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:15.658Z,1478854575.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:15.676Z,1478854575.676 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2016-11-11T08:56:15.710Z,1478854575.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:16.059Z,1478854576.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:16.081Z,1478854576.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:16.465Z,1478854576.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:16.501Z,1478854576.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:16.864Z,1478854576.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:16.906Z,1478854576.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:17.266Z,1478854577.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:17.273Z,1478854577.273 [PNI_TCM](ERROR): CRC does not match. Expected:0x3960 got:0x56839
2016-11-11T08:56:17.302Z,1478854577.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:17.665Z,1478854577.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:17.685Z,1478854577.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:18.066Z,1478854578.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:18.085Z,1478854578.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:18.469Z,1478854578.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:18.485Z,1478854578.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:18.861Z,1478854578.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:18.897Z,1478854578.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:19.275Z,1478854579.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:19.290Z,1478854579.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:19.661Z,1478854579.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:19.749Z,1478854579.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:20.058Z,1478854580.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:20.098Z,1478854580.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:20.460Z,1478854580.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:20.485Z,1478854580.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:20.860Z,1478854580.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:20.905Z,1478854580.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:21.262Z,1478854581.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:21.281Z,1478854581.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:21.668Z,1478854581.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:21.711Z,1478854581.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:22.068Z,1478854582.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:22.113Z,1478854582.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:22.463Z,1478854582.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:22.484Z,1478854582.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:22.865Z,1478854582.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:22.894Z,1478854582.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:23.258Z,1478854583.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:23.289Z,1478854583.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:23.659Z,1478854583.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:23.695Z,1478854583.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:24.058Z,1478854584.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:24.101Z,1478854584.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:24.457Z,1478854584.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:24.472Z,1478854584.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:24.867Z,1478854584.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:24.900Z,1478854584.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:25.263Z,1478854585.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:25.279Z,1478854585.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:25.662Z,1478854585.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:25.686Z,1478854585.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:26.063Z,1478854586.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:26.078Z,1478854586.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:26.472Z,1478854586.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:26.493Z,1478854586.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:26.866Z,1478854586.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:26.882Z,1478854586.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:27.264Z,1478854587.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:27.280Z,1478854587.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:27.665Z,1478854587.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:27.685Z,1478854587.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:28.067Z,1478854588.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:28.126Z,1478854588.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:28.472Z,1478854588.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:28.488Z,1478854588.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:28.864Z,1478854588.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:28.887Z,1478854588.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:29.278Z,1478854589.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:29.317Z,1478854589.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:29.664Z,1478854589.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:29.689Z,1478854589.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:30.064Z,1478854590.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:30.085Z,1478854590.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:30.464Z,1478854590.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:30.479Z,1478854590.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:30.864Z,1478854590.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:30.885Z,1478854590.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:31.262Z,1478854591.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:31.293Z,1478854591.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:31.664Z,1478854591.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:31.792Z,1478854591.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:32.060Z,1478854592.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:32.084Z,1478854592.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:32.460Z,1478854592.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:32.493Z,1478854592.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:32.859Z,1478854592.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:32.893Z,1478854592.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:33.257Z,1478854593.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:33.289Z,1478854593.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:33.657Z,1478854593.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:33.689Z,1478854593.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:34.076Z,1478854594.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:34.157Z,1478854594.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:34.464Z,1478854594.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:34.499Z,1478854594.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:34.857Z,1478854594.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:34.890Z,1478854594.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:35.257Z,1478854595.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:35.302Z,1478854595.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:35.657Z,1478854595.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:35.677Z,1478854595.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:36.059Z,1478854596.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:36.109Z,1478854596.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:36.468Z,1478854596.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:36.512Z,1478854596.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:36.865Z,1478854596.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:36.881Z,1478854596.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:37.260Z,1478854597.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:37.284Z,1478854597.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:37.665Z,1478854597.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:37.680Z,1478854597.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:38.064Z,1478854598.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:38.079Z,1478854598.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:38.472Z,1478854598.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:38.493Z,1478854598.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:38.865Z,1478854598.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:38.892Z,1478854598.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:39.265Z,1478854599.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:39.280Z,1478854599.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:39.672Z,1478854599.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:39.687Z,1478854599.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:40.057Z,1478854600.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:40.090Z,1478854600.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:40.457Z,1478854600.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:40.483Z,1478854600.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:40.857Z,1478854600.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:40.889Z,1478854600.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:41.257Z,1478854601.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:41.291Z,1478854601.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:41.657Z,1478854601.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:41.683Z,1478854601.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:42.068Z,1478854602.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:42.084Z,1478854602.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:42.457Z,1478854602.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:42.486Z,1478854602.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:42.873Z,1478854602.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:42.888Z,1478854602.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:43.265Z,1478854603.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:43.287Z,1478854603.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:43.667Z,1478854603.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:43.682Z,1478854603.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:44.057Z,1478854604.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:44.090Z,1478854604.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:44.473Z,1478854604.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:44.493Z,1478854604.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:44.868Z,1478854604.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:44.892Z,1478854604.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:45.257Z,1478854605.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:45.283Z,1478854605.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:45.657Z,1478854605.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:45.694Z,1478854605.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:46.057Z,1478854606.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:46.093Z,1478854606.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:46.457Z,1478854606.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:46.493Z,1478854606.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:46.865Z,1478854606.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:46.897Z,1478854606.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:47.262Z,1478854607.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:47.293Z,1478854607.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:47.884Z,1478854607.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:48.680Z,1478854608.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:49.092Z,1478854609.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:49.888Z,1478854609.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:50.684Z,1478854610.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:50.867Z,1478854610.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:50.953Z,1478854610.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:51.048Z,1478854611.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:51.089Z,1478854611.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:51.092Z,1478854611.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:51.437Z,1478854611.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:51.494Z,1478854611.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:51.836Z,1478854611.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:51.856Z,1478854611.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:51.888Z,1478854611.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:52.253Z,1478854612.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:52.317Z,1478854612.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:52.640Z,1478854612.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:52.678Z,1478854612.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:52.692Z,1478854612.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:53.033Z,1478854613.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:53.069Z,1478854613.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:53.100Z,1478854613.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:53.429Z,1478854613.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:53.461Z,1478854613.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:53.829Z,1478854613.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:53.862Z,1478854613.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:53.896Z,1478854613.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:54.249Z,1478854614.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:54.310Z,1478854614.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:54.629Z,1478854614.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:54.664Z,1478854614.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:54.692Z,1478854614.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:55.034Z,1478854615.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:55.049Z,1478854615.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:55.100Z,1478854615.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:55.437Z,1478854615.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:55.474Z,1478854615.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:55.834Z,1478854615.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:55.857Z,1478854615.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:55.896Z,1478854615.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:56.249Z,1478854616.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:56.305Z,1478854616.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:56.632Z,1478854616.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:56.648Z,1478854616.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:56.692Z,1478854616.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:57.040Z,1478854617.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:57.055Z,1478854617.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:57.100Z,1478854617.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:57.436Z,1478854617.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:57.451Z,1478854617.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:57.840Z,1478854617.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:57.856Z,1478854617.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:57.896Z,1478854617.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:58.273Z,1478854618.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:58.308Z,1478854618.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:58.629Z,1478854618.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:58.644Z,1478854618.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:58.692Z,1478854618.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:59.033Z,1478854619.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:59.053Z,1478854619.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:59.100Z,1478854619.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:59.436Z,1478854619.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:59.451Z,1478854619.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:59.835Z,1478854619.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:56:59.850Z,1478854619.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:56:59.896Z,1478854619.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:00.235Z,1478854620.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:00.251Z,1478854620.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:00.631Z,1478854620.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:00.663Z,1478854620.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:00.692Z,1478854620.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:01.040Z,1478854621.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:01.056Z,1478854621.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:01.100Z,1478854621.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:01.436Z,1478854621.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:01.459Z,1478854621.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:01.829Z,1478854621.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:01.865Z,1478854621.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:01.896Z,1478854621.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:02.229Z,1478854622.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:02.273Z,1478854622.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:02.644Z,1478854622.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:02.679Z,1478854622.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:02.692Z,1478854622.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:03.037Z,1478854623.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:03.073Z,1478854623.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:03.108Z,1478854623.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:03.432Z,1478854623.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:03.447Z,1478854623.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:03.833Z,1478854623.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:03.853Z,1478854623.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:03.904Z,1478854623.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:04.232Z,1478854624.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:04.247Z,1478854624.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:04.649Z,1478854624.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:04.700Z,1478854624.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:04.749Z,1478854624.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:05.043Z,1478854625.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:05.059Z,1478854625.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:05.108Z,1478854625.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:05.437Z,1478854625.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:05.486Z,1478854625.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:05.829Z,1478854625.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:05.857Z,1478854625.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:05.904Z,1478854625.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:06.274Z,1478854626.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:06.352Z,1478854626.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:06.629Z,1478854626.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:06.685Z,1478854626.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:06.712Z,1478854626.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:07.036Z,1478854627.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:07.057Z,1478854627.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:07.435Z,1478854627.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:07.450Z,1478854627.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:07.508Z,1478854627.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:07.836Z,1478854627.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:07.851Z,1478854627.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:08.255Z,1478854628.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:08.304Z,1478854628.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:08.305Z,1478854628.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:08.631Z,1478854628.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:08.664Z,1478854628.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:08.728Z,1478854628.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:09.029Z,1478854629.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:09.062Z,1478854629.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:09.429Z,1478854629.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:09.462Z,1478854629.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:09.524Z,1478854629.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:09.844Z,1478854629.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:09.865Z,1478854629.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:10.245Z,1478854630.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:10.301Z,1478854630.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:10.322Z,1478854630.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:10.629Z,1478854630.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:10.672Z,1478854630.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:10.732Z,1478854630.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:11.029Z,1478854631.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:11.069Z,1478854631.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:11.429Z,1478854631.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:11.449Z,1478854631.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:11.528Z,1478854631.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:11.829Z,1478854631.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:11.844Z,1478854631.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:12.243Z,1478854632.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:12.293Z,1478854632.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:12.324Z,1478854632.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:12.632Z,1478854632.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:12.665Z,1478854632.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:12.732Z,1478854632.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:13.038Z,1478854633.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:13.053Z,1478854633.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:13.432Z,1478854633.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:13.456Z,1478854633.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:13.528Z,1478854633.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:13.841Z,1478854633.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:13.856Z,1478854633.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:14.235Z,1478854634.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:14.282Z,1478854634.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:14.324Z,1478854634.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:14.632Z,1478854634.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:14.656Z,1478854634.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:14.760Z,1478854634.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:15.045Z,1478854635.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:15.060Z,1478854635.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:15.433Z,1478854635.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:15.462Z,1478854635.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:15.556Z,1478854635.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:15.833Z,1478854635.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:15.866Z,1478854635.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:16.233Z,1478854636.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:16.265Z,1478854636.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:16.352Z,1478854636.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:16.632Z,1478854636.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:16.687Z,1478854636.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:17.029Z,1478854637.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:17.062Z,1478854637.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:17.072Z,1478854637.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:17.437Z,1478854637.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:17.466Z,1478854637.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:17.833Z,1478854637.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:17.868Z,1478854637.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:17.871Z,1478854637.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:18.234Z,1478854638.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:18.250Z,1478854638.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:18.639Z,1478854638.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:18.664Z,1478854638.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:18.706Z,1478854638.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:19.036Z,1478854639.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:19.070Z,1478854639.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:19.072Z,1478854639.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:19.437Z,1478854639.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:19.452Z,1478854639.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:19.841Z,1478854639.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:19.868Z,1478854639.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:19.882Z,1478854639.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:20.257Z,1478854640.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:20.285Z,1478854640.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:20.629Z,1478854640.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:20.664Z,1478854640.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:20.677Z,1478854640.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:21.037Z,1478854641.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:21.072Z,1478854641.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:21.085Z,1478854641.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:21.429Z,1478854641.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:21.449Z,1478854641.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:21.836Z,1478854641.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:21.851Z,1478854641.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:21.868Z,1478854641.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:22.254Z,1478854642.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:22.282Z,1478854642.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:22.629Z,1478854642.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:22.664Z,1478854642.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:22.677Z,1478854642.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:23.029Z,1478854643.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:23.049Z,1478854643.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:23.072Z,1478854643.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:23.434Z,1478854643.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:23.453Z,1478854643.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:23.832Z,1478854643.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:23.847Z,1478854643.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:23.868Z,1478854643.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:24.246Z,1478854644.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:24.282Z,1478854644.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:24.640Z,1478854644.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:24.661Z,1478854644.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:24.664Z,1478854644.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:25.029Z,1478854645.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:25.062Z,1478854645.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:25.072Z,1478854645.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:25.430Z,1478854645.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:25.466Z,1478854645.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:25.829Z,1478854645.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:25.860Z,1478854645.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:25.868Z,1478854645.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:26.237Z,1478854646.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:26.267Z,1478854646.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:26.629Z,1478854646.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:26.644Z,1478854646.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:26.664Z,1478854646.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:27.041Z,1478854647.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:27.056Z,1478854647.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:27.072Z,1478854647.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:27.435Z,1478854647.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:27.457Z,1478854647.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:27.836Z,1478854647.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:27.852Z,1478854647.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:27.868Z,1478854647.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:28.263Z,1478854648.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:28.333Z,1478854648.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:28.629Z,1478854648.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:28.664Z,1478854648.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:28.672Z,1478854648.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:29.029Z,1478854649.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:29.056Z,1478854649.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:29.072Z,1478854649.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:29.433Z,1478854649.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:29.470Z,1478854649.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:29.829Z,1478854649.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:29.868Z,1478854649.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:29.876Z,1478854649.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:30.233Z,1478854650.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:30.269Z,1478854650.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:30.629Z,1478854650.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:30.644Z,1478854650.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:30.664Z,1478854650.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:31.033Z,1478854651.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:31.048Z,1478854651.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:31.072Z,1478854651.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:31.429Z,1478854651.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:31.449Z,1478854651.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:31.836Z,1478854651.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:31.851Z,1478854651.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:31.868Z,1478854651.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:32.236Z,1478854652.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:32.257Z,1478854652.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:32.637Z,1478854652.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:32.652Z,1478854652.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:32.664Z,1478854652.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:33.043Z,1478854653.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:33.072Z,1478854653.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:33.129Z,1478854653.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:33.429Z,1478854653.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:33.462Z,1478854653.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:33.829Z,1478854653.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:33.868Z,1478854653.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:33.889Z,1478854653.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:34.246Z,1478854654.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:34.277Z,1478854654.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:34.633Z,1478854654.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:34.664Z,1478854654.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:34.690Z,1478854654.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:35.036Z,1478854655.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:35.072Z,1478854655.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:35.086Z,1478854655.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:35.434Z,1478854655.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:35.454Z,1478854655.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:35.835Z,1478854655.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:35.857Z,1478854655.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:35.876Z,1478854655.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:36.240Z,1478854656.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:36.286Z,1478854656.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:36.629Z,1478854656.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:36.660Z,1478854656.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:36.662Z,1478854656.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:37.029Z,1478854657.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:37.063Z,1478854657.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:37.429Z,1478854657.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:37.456Z,1478854657.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:37.467Z,1478854657.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:37.829Z,1478854657.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:37.861Z,1478854657.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:38.234Z,1478854658.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:38.252Z,1478854658.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:38.273Z,1478854658.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:38.629Z,1478854658.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:38.649Z,1478854658.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:38.688Z,1478854658.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:39.034Z,1478854659.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:39.049Z,1478854659.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:39.432Z,1478854659.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:39.447Z,1478854659.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:39.484Z,1478854659.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:39.836Z,1478854659.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:39.851Z,1478854659.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:40.253Z,1478854660.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:40.273Z,1478854660.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:40.280Z,1478854660.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:40.629Z,1478854660.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:40.664Z,1478854660.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:40.712Z,1478854660.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:41.029Z,1478854661.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:41.060Z,1478854661.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:41.433Z,1478854661.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:41.469Z,1478854661.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:41.508Z,1478854661.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:41.829Z,1478854661.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:41.872Z,1478854661.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:42.287Z,1478854662.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:42.304Z,1478854662.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:42.345Z,1478854662.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:42.629Z,1478854662.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:42.649Z,1478854662.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:42.720Z,1478854662.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:43.033Z,1478854663.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:43.053Z,1478854663.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:43.437Z,1478854663.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:43.452Z,1478854663.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:43.516Z,1478854663.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:43.837Z,1478854663.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:43.852Z,1478854663.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:44.235Z,1478854664.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:44.257Z,1478854664.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:44.312Z,1478854664.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:44.642Z,1478854664.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:44.658Z,1478854664.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:44.984Z,1478854664.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:45.043Z,1478854665.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:45.071Z,1478854665.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:45.439Z,1478854665.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:45.458Z,1478854665.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:45.780Z,1478854665.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:45.841Z,1478854665.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:45.862Z,1478854665.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:46.244Z,1478854666.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:46.265Z,1478854666.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:46.576Z,1478854666.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:46.633Z,1478854666.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:46.665Z,1478854666.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:46.984Z,1478854666.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:47.033Z,1478854667.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:47.101Z,1478854667.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:47.438Z,1478854667.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:47.453Z,1478854667.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:47.780Z,1478854667.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:48.576Z,1478854668.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:48.984Z,1478854668.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:49.780Z,1478854669.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:50.576Z,1478854670.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:50.992Z,1478854670.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:51.788Z,1478854671.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:51.859Z,1478854671.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:51.927Z,1478854671.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:52.045Z,1478854672.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:52.069Z,1478854672.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:52.432Z,1478854672.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:52.494Z,1478854672.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:52.584Z,1478854672.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:52.822Z,1478854672.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:52.891Z,1478854672.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:52.992Z,1478854672.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:53.223Z,1478854673.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:53.262Z,1478854673.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:53.627Z,1478854673.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:53.647Z,1478854673.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:53.788Z,1478854673.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:54.023Z,1478854674.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:54.085Z,1478854674.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:54.423Z,1478854674.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:54.472Z,1478854674.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:54.584Z,1478854674.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:54.822Z,1478854674.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:54.910Z,1478854674.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:54.992Z,1478854674.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:55.224Z,1478854675.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:55.286Z,1478854675.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:55.630Z,1478854675.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:55.686Z,1478854675.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:55.788Z,1478854675.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:56.023Z,1478854676.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:56.094Z,1478854676.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:56.423Z,1478854676.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:56.498Z,1478854676.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:56.584Z,1478854676.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:56.823Z,1478854676.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:56.881Z,1478854676.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:56.992Z,1478854676.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:57.227Z,1478854677.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:57.272Z,1478854677.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:57.623Z,1478854677.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:57.666Z,1478854677.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:57.788Z,1478854677.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:58.023Z,1478854678.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:58.069Z,1478854678.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:58.427Z,1478854678.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:58.479Z,1478854678.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:58.584Z,1478854678.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:58.823Z,1478854678.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:58.863Z,1478854678.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:59.008Z,1478854679.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:59.221Z,1478854679.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:59.236Z,1478854679.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:59.642Z,1478854679.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:57:59.676Z,1478854679.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:57:59.804Z,1478854679.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:00.021Z,1478854680.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:00.074Z,1478854680.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:00.458Z,1478854680.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:00.568Z,1478854680.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:00.600Z,1478854680.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:00.835Z,1478854680.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:00.877Z,1478854680.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:01.044Z,1478854681.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:01.221Z,1478854681.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:01.259Z,1478854681.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:01.633Z,1478854681.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:01.670Z,1478854681.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:01.840Z,1478854681.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:02.025Z,1478854682.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:02.088Z,1478854682.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:02.434Z,1478854682.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:02.451Z,1478854682.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:02.608Z,1478854682.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:02.827Z,1478854682.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:02.844Z,1478854682.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:03.238Z,1478854683.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:03.256Z,1478854683.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:03.404Z,1478854683.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:03.627Z,1478854683.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:03.652Z,1478854683.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:04.038Z,1478854684.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:04.056Z,1478854684.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:04.200Z,1478854684.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:04.430Z,1478854684.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:04.456Z,1478854684.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:04.636Z,1478854684.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:04.823Z,1478854684.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:04.879Z,1478854684.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:05.223Z,1478854685.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:05.326Z,1478854685.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:05.432Z,1478854685.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:05.632Z,1478854685.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:05.662Z,1478854685.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:06.023Z,1478854686.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:06.077Z,1478854686.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:06.228Z,1478854686.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:06.423Z,1478854686.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:06.464Z,1478854686.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:06.636Z,1478854686.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:06.822Z,1478854686.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:06.873Z,1478854686.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:07.223Z,1478854687.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:07.291Z,1478854687.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:07.432Z,1478854687.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:07.621Z,1478854687.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:07.689Z,1478854687.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:08.031Z,1478854688.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:08.089Z,1478854688.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:08.228Z,1478854688.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:08.430Z,1478854688.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:08.469Z,1478854688.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:08.668Z,1478854688.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:08.824Z,1478854688.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:08.864Z,1478854688.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:09.224Z,1478854689.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:09.280Z,1478854689.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:09.464Z,1478854689.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:09.631Z,1478854689.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:09.678Z,1478854689.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:10.028Z,1478854690.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:10.084Z,1478854690.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:10.260Z,1478854690.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:10.423Z,1478854690.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:10.472Z,1478854690.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:10.668Z,1478854690.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:10.831Z,1478854690.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:10.874Z,1478854690.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:11.230Z,1478854691.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:11.275Z,1478854691.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:11.465Z,1478854691.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:11.630Z,1478854691.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:11.662Z,1478854691.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:12.023Z,1478854692.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:12.061Z,1478854692.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:12.260Z,1478854692.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:12.423Z,1478854692.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:12.510Z,1478854692.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:12.829Z,1478854692.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:12.850Z,1478854692.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:13.005Z,1478854693.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:13.228Z,1478854693.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:13.258Z,1478854693.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:13.623Z,1478854693.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:13.662Z,1478854693.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:13.800Z,1478854693.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:14.023Z,1478854694.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:14.066Z,1478854694.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:14.423Z,1478854694.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:14.512Z,1478854694.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:14.596Z,1478854694.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:14.823Z,1478854694.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:14.862Z,1478854694.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:15.004Z,1478854695.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:15.227Z,1478854695.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:15.274Z,1478854695.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:15.628Z,1478854695.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:15.643Z,1478854695.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:15.800Z,1478854695.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:16.021Z,1478854696.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:16.056Z,1478854696.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:16.421Z,1478854696.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:16.456Z,1478854696.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:16.572Z,1478854696.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:16.825Z,1478854696.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:16.861Z,1478854696.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:17.222Z,1478854697.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:17.260Z,1478854697.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:17.368Z,1478854697.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:17.624Z,1478854697.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:17.640Z,1478854697.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:18.021Z,1478854698.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:18.041Z,1478854698.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:18.164Z,1478854698.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:18.428Z,1478854698.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:18.444Z,1478854698.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:18.644Z,1478854698.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:18.824Z,1478854698.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:18.847Z,1478854698.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:19.232Z,1478854699.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:19.309Z,1478854699.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:19.440Z,1478854699.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:19.629Z,1478854699.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:19.645Z,1478854699.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:20.029Z,1478854700.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:20.049Z,1478854700.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:20.236Z,1478854700.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:20.433Z,1478854700.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:20.488Z,1478854700.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:20.644Z,1478854700.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:20.821Z,1478854700.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:20.853Z,1478854700.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:21.221Z,1478854701.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:21.270Z,1478854701.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:21.440Z,1478854701.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:21.621Z,1478854701.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:21.670Z,1478854701.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:22.021Z,1478854702.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:22.053Z,1478854702.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:22.236Z,1478854702.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:22.421Z,1478854702.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:22.461Z,1478854702.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:22.644Z,1478854702.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:22.821Z,1478854702.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:22.864Z,1478854702.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:23.225Z,1478854703.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:23.245Z,1478854703.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:23.440Z,1478854703.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:23.621Z,1478854703.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:23.636Z,1478854703.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:24.025Z,1478854704.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:24.040Z,1478854704.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:24.236Z,1478854704.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:24.429Z,1478854704.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:24.449Z,1478854704.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:24.648Z,1478854704.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:24.821Z,1478854704.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:24.836Z,1478854704.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:25.221Z,1478854705.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:25.241Z,1478854705.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:25.444Z,1478854705.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:25.618Z,1478854705.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:25.633Z,1478854705.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:26.025Z,1478854706.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:26.058Z,1478854706.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:26.240Z,1478854706.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:26.425Z,1478854706.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:26.494Z,1478854706.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:26.825Z,1478854706.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:26.840Z,1478854706.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:26.912Z,1478854706.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:27.221Z,1478854707.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:27.241Z,1478854707.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:27.625Z,1478854707.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:27.640Z,1478854707.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:27.708Z,1478854707.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:28.021Z,1478854708.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:28.041Z,1478854708.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:28.421Z,1478854708.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:28.477Z,1478854708.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:28.504Z,1478854708.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:28.826Z,1478854708.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:28.841Z,1478854708.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:28.924Z,1478854708.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:29.225Z,1478854709.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:29.241Z,1478854709.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:29.621Z,1478854709.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:29.674Z,1478854709.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:29.720Z,1478854709.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:30.025Z,1478854710.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:30.041Z,1478854710.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:30.427Z,1478854710.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:30.443Z,1478854710.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:30.516Z,1478854710.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:30.821Z,1478854710.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:30.841Z,1478854710.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:30.924Z,1478854710.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:31.225Z,1478854711.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:31.241Z,1478854711.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:31.621Z,1478854711.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:31.637Z,1478854711.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:31.720Z,1478854711.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:32.025Z,1478854712.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:32.040Z,1478854712.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:32.421Z,1478854712.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:32.441Z,1478854712.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:32.516Z,1478854712.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:32.825Z,1478854712.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:32.834Z,1478854712.834 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T08:58:32.834Z,1478854712.834 [BPC1] Data Fault, FailCount= 1
2016-11-11T08:58:32.834Z,1478854712.834 [BPC1](ERROR): Data Fault
2016-11-11T08:58:32.842Z,1478854712.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:32.862Z,1478854712.862 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T08:58:32.924Z,1478854712.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:33.225Z,1478854713.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:33.241Z,1478854713.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:33.625Z,1478854713.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:33.641Z,1478854713.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:33.720Z,1478854713.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:34.021Z,1478854714.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:34.036Z,1478854714.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:34.084Z,1478854714.085 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T08:58:34.085Z,1478854714.085 [BPC1] No Fault, FailCount= 1
2016-11-11T08:58:34.421Z,1478854714.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:34.482Z,1478854714.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:34.516Z,1478854714.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:34.831Z,1478854714.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:34.877Z,1478854714.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:34.924Z,1478854714.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:35.225Z,1478854715.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:35.241Z,1478854715.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:35.645Z,1478854715.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:35.717Z,1478854715.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:35.720Z,1478854715.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:36.025Z,1478854716.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:36.041Z,1478854716.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:36.421Z,1478854716.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:36.436Z,1478854716.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:36.516Z,1478854716.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:36.825Z,1478854716.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:36.840Z,1478854716.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:36.924Z,1478854716.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:37.225Z,1478854717.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:37.241Z,1478854717.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:37.625Z,1478854717.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:37.640Z,1478854717.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:37.720Z,1478854717.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:38.025Z,1478854718.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:38.040Z,1478854718.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:38.441Z,1478854718.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:38.458Z,1478854718.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:38.516Z,1478854718.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:38.825Z,1478854718.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:38.840Z,1478854718.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:38.924Z,1478854718.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:39.225Z,1478854719.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:39.240Z,1478854719.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:39.625Z,1478854719.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:39.641Z,1478854719.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:39.720Z,1478854719.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:40.025Z,1478854720.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:40.040Z,1478854720.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:40.437Z,1478854720.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:40.473Z,1478854720.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:40.516Z,1478854720.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:40.821Z,1478854720.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:40.841Z,1478854720.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:40.924Z,1478854720.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:41.221Z,1478854721.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:41.249Z,1478854721.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:41.621Z,1478854721.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:41.641Z,1478854721.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:41.720Z,1478854721.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:42.022Z,1478854722.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:42.049Z,1478854722.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:42.461Z,1478854722.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:42.508Z,1478854722.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:42.516Z,1478854722.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:42.822Z,1478854722.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:42.855Z,1478854722.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:42.924Z,1478854722.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:43.222Z,1478854723.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:43.249Z,1478854723.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:43.650Z,1478854723.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:43.680Z,1478854723.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:43.720Z,1478854723.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:44.021Z,1478854724.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:44.076Z,1478854724.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:44.422Z,1478854724.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:44.450Z,1478854724.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:44.516Z,1478854724.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:44.822Z,1478854724.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:44.849Z,1478854724.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:44.924Z,1478854724.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:45.221Z,1478854725.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:45.250Z,1478854725.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:45.621Z,1478854725.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:45.636Z,1478854725.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:46.026Z,1478854726.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:46.078Z,1478854726.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:46.424Z,1478854726.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:46.453Z,1478854726.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:46.832Z,1478854726.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:46.847Z,1478854726.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:47.221Z,1478854727.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:47.297Z,1478854727.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:47.621Z,1478854727.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:47.656Z,1478854727.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:51.064Z,1478854731.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:51.118Z,1478854731.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:51.210Z,1478854731.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:51.257Z,1478854731.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:51.316Z,1478854731.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:51.610Z,1478854731.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:51.655Z,1478854731.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:52.012Z,1478854732.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:52.060Z,1478854732.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:52.112Z,1478854732.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:52.412Z,1478854732.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:52.428Z,1478854732.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:52.580Z,1478854732.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:52.811Z,1478854732.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:52.830Z,1478854732.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:53.212Z,1478854733.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:53.233Z,1478854733.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:53.376Z,1478854733.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:53.612Z,1478854733.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:53.629Z,1478854733.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:54.013Z,1478854734.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:54.033Z,1478854734.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:54.172Z,1478854734.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:54.439Z,1478854734.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:54.474Z,1478854734.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:54.805Z,1478854734.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:54.828Z,1478854734.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:54.912Z,1478854734.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:55.205Z,1478854735.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:55.248Z,1478854735.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:55.605Z,1478854735.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:55.648Z,1478854735.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:55.708Z,1478854735.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:56.005Z,1478854736.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:56.020Z,1478854736.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:56.440Z,1478854736.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:56.473Z,1478854736.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:56.504Z,1478854736.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:56.805Z,1478854736.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:56.825Z,1478854736.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:56.920Z,1478854736.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:57.209Z,1478854737.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:57.224Z,1478854737.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:57.612Z,1478854737.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:57.627Z,1478854737.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:57.716Z,1478854737.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:58.011Z,1478854738.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:58.085Z,1478854738.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:58.412Z,1478854738.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:58.428Z,1478854738.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:58.512Z,1478854738.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:58.817Z,1478854738.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:58.844Z,1478854738.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:58.920Z,1478854738.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:59.205Z,1478854739.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:59.239Z,1478854739.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:58:59.605Z,1478854739.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:58:59.638Z,1478854739.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:00.005Z,1478854740.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:00.081Z,1478854740.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:00.405Z,1478854740.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:00.425Z,1478854740.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:00.817Z,1478854740.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:00.832Z,1478854740.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:01.212Z,1478854741.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:01.233Z,1478854741.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:01.311Z,1478854741.311 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T08:59:01.311Z,1478854741.311 [Rowe_600LCM] Communications Fault, FailCount= 3
2016-11-11T08:59:01.311Z,1478854741.311 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T08:59:01.613Z,1478854741.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:01.627Z,1478854741.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T08:59:01.629Z,1478854741.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:01.680Z,1478854741.680 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T08:59:01.715Z,1478854741.715 [Rowe_600LCM](INFO): Powering down
2016-11-11T08:59:02.012Z,1478854742.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:02.027Z,1478854742.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T08:59:02.028Z,1478854742.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:02.415Z,1478854742.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:02.433Z,1478854742.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T08:59:02.434Z,1478854742.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:02.817Z,1478854742.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:02.833Z,1478854742.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T08:59:02.834Z,1478854742.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:03.213Z,1478854743.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:03.228Z,1478854743.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T08:59:03.229Z,1478854743.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:03.250Z,1478854743.250 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T08:59:03.250Z,1478854743.250 [Rowe_600LCM] No Fault, FailCount= 3
2016-11-11T08:59:03.331Z,1478854743.331 [Rowe_600LCM](INFO): Initializing
2016-11-11T08:59:03.332Z,1478854743.332 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T08:59:03.332Z,1478854743.332 [Rowe_600LCM](INFO): LCM OK
2016-11-11T08:59:03.332Z,1478854743.332 [Rowe_600LCM](INFO): Powering up
2016-11-11T08:59:03.605Z,1478854743.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:03.637Z,1478854743.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T08:59:03.638Z,1478854743.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:04.009Z,1478854744.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:04.072Z,1478854744.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T08:59:04.074Z,1478854744.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:04.405Z,1478854744.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:04.420Z,1478854744.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T08:59:04.421Z,1478854744.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:04.810Z,1478854744.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:04.825Z,1478854744.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T08:59:04.826Z,1478854744.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:05.213Z,1478854745.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:05.264Z,1478854745.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T08:59:05.266Z,1478854745.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:05.612Z,1478854745.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:05.627Z,1478854745.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T08:59:05.628Z,1478854745.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:06.024Z,1478854746.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:06.071Z,1478854746.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T08:59:06.072Z,1478854746.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:06.411Z,1478854746.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:06.426Z,1478854746.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T08:59:06.428Z,1478854746.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:06.812Z,1478854746.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:06.863Z,1478854746.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T08:59:06.864Z,1478854746.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:07.211Z,1478854747.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:07.226Z,1478854747.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T08:59:07.227Z,1478854747.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:07.461Z,1478854747.461 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T08:59:07.526Z,1478854747.526 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T08:59:07.528Z,1478854747.528 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T08:59:07.529Z,1478854747.529 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T08:59:07.530Z,1478854747.530 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T08:59:07.615Z,1478854747.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:07.641Z,1478854747.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T08:59:07.642Z,1478854747.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:08.018Z,1478854748.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:08.048Z,1478854748.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:08.418Z,1478854748.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:08.468Z,1478854748.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:08.825Z,1478854748.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:08.854Z,1478854748.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:09.205Z,1478854749.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:09.237Z,1478854749.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:09.605Z,1478854749.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:09.625Z,1478854749.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:10.009Z,1478854750.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:10.025Z,1478854750.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:10.413Z,1478854750.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:10.428Z,1478854750.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:10.811Z,1478854750.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:10.833Z,1478854750.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:11.209Z,1478854751.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:11.225Z,1478854751.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:11.612Z,1478854751.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:11.628Z,1478854751.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:12.018Z,1478854752.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:12.096Z,1478854752.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:12.132Z,1478854752.132 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:12.133Z,1478854752.133 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 64
2016-11-11T08:59:12.133Z,1478854752.133 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T08:59:12.135Z,1478854752.135 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:12.135Z,1478854752.135 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 64
2016-11-11T08:59:12.135Z,1478854752.135 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T08:59:12.166Z,1478854752.166 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T08:59:12.166Z,1478854752.166 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T08:59:12.405Z,1478854752.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:12.426Z,1478854752.425 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:12.426Z,1478854752.426 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2016-11-11T08:59:12.426Z,1478854752.426 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T08:59:12.478Z,1478854752.478 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T08:59:12.478Z,1478854752.478 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T08:59:12.478Z,1478854752.478 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 64
2016-11-11T08:59:12.479Z,1478854752.479 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T08:59:12.479Z,1478854752.479 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 64
2016-11-11T08:59:12.805Z,1478854752.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:12.832Z,1478854752.832 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T08:59:12.833Z,1478854752.833 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:59:12.833Z,1478854752.833 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:59:12.833Z,1478854752.833 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T08:59:12.834Z,1478854752.834 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:59:12.834Z,1478854752.834 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:59:12.868Z,1478854752.868 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T08:59:12.868Z,1478854752.868 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2016-11-11T08:59:13.213Z,1478854753.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:13.227Z,1478854753.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T08:59:13.228Z,1478854753.228 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T08:59:13.228Z,1478854753.228 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T08:59:13.620Z,1478854753.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:13.641Z,1478854753.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:14.019Z,1478854754.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:14.075Z,1478854754.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:14.409Z,1478854754.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:14.445Z,1478854754.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:14.805Z,1478854754.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:14.841Z,1478854754.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:15.209Z,1478854755.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:15.224Z,1478854755.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:15.610Z,1478854755.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:15.629Z,1478854755.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:16.047Z,1478854756.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:16.075Z,1478854756.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:16.413Z,1478854756.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:16.428Z,1478854756.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:16.813Z,1478854756.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:16.833Z,1478854756.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:17.208Z,1478854757.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:17.231Z,1478854757.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:17.612Z,1478854757.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:17.640Z,1478854757.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:18.069Z,1478854758.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:18.088Z,1478854758.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:18.405Z,1478854758.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:18.438Z,1478854758.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:18.805Z,1478854758.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:18.885Z,1478854758.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:19.205Z,1478854759.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:19.249Z,1478854759.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:19.605Z,1478854759.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:19.620Z,1478854759.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:20.038Z,1478854760.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:20.119Z,1478854760.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:20.421Z,1478854760.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:20.435Z,1478854760.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:20.805Z,1478854760.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:20.854Z,1478854760.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:21.205Z,1478854761.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:21.261Z,1478854761.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:21.605Z,1478854761.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:21.638Z,1478854761.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:22.005Z,1478854762.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:22.039Z,1478854762.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:22.413Z,1478854762.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:22.438Z,1478854762.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:22.805Z,1478854762.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:22.841Z,1478854762.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:23.205Z,1478854763.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:23.243Z,1478854763.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:23.341Z,1478854763.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:23.605Z,1478854763.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:23.628Z,1478854763.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:24.005Z,1478854764.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:24.048Z,1478854764.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:24.136Z,1478854764.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:24.410Z,1478854764.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:24.444Z,1478854764.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:24.805Z,1478854764.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:24.845Z,1478854764.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:25.205Z,1478854765.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:25.220Z,1478854765.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:25.605Z,1478854765.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:25.625Z,1478854765.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:26.008Z,1478854766.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:26.024Z,1478854766.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:26.425Z,1478854766.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:26.467Z,1478854766.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:26.808Z,1478854766.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:26.823Z,1478854766.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:27.213Z,1478854767.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:27.228Z,1478854767.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:27.611Z,1478854767.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:27.633Z,1478854767.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:28.041Z,1478854768.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:28.083Z,1478854768.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:28.411Z,1478854768.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:28.430Z,1478854768.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:28.819Z,1478854768.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:28.834Z,1478854768.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:29.213Z,1478854769.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:29.228Z,1478854769.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:29.613Z,1478854769.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:29.628Z,1478854769.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:30.013Z,1478854770.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:30.062Z,1478854770.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:30.405Z,1478854770.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:30.424Z,1478854770.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:30.813Z,1478854770.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:30.828Z,1478854770.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:31.212Z,1478854771.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:31.227Z,1478854771.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:31.611Z,1478854771.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:31.633Z,1478854771.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:32.040Z,1478854772.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:32.080Z,1478854772.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:32.412Z,1478854772.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:32.427Z,1478854772.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:32.812Z,1478854772.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:32.833Z,1478854772.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:33.212Z,1478854773.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:33.253Z,1478854773.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:33.605Z,1478854773.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:33.666Z,1478854773.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:34.013Z,1478854774.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:34.061Z,1478854774.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:34.405Z,1478854774.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:34.468Z,1478854774.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:34.805Z,1478854774.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:34.825Z,1478854774.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:35.205Z,1478854775.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:35.262Z,1478854775.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:35.605Z,1478854775.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:35.662Z,1478854775.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:36.005Z,1478854776.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:36.081Z,1478854776.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:36.411Z,1478854776.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:36.433Z,1478854776.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:36.816Z,1478854776.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:36.837Z,1478854776.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:37.211Z,1478854777.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:37.238Z,1478854777.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:37.612Z,1478854777.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:37.633Z,1478854777.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:38.008Z,1478854778.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:38.032Z,1478854778.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:38.422Z,1478854778.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:38.442Z,1478854778.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:38.805Z,1478854778.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:38.838Z,1478854778.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:39.212Z,1478854779.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:39.235Z,1478854779.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:39.605Z,1478854779.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:39.637Z,1478854779.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:40.005Z,1478854780.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:40.037Z,1478854780.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:40.406Z,1478854780.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:40.452Z,1478854780.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:40.809Z,1478854780.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:40.834Z,1478854780.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:41.205Z,1478854781.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:41.241Z,1478854781.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:41.605Z,1478854781.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:41.633Z,1478854781.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:42.032Z,1478854782.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:42.096Z,1478854782.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:42.405Z,1478854782.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:42.432Z,1478854782.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:42.809Z,1478854782.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:42.845Z,1478854782.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:43.205Z,1478854783.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:43.245Z,1478854783.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:43.608Z,1478854783.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:43.624Z,1478854783.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:44.024Z,1478854784.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:44.063Z,1478854784.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:44.405Z,1478854784.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:44.440Z,1478854784.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:44.808Z,1478854784.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:44.831Z,1478854784.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:45.220Z,1478854785.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:45.241Z,1478854785.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:45.605Z,1478854785.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:45.647Z,1478854785.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:46.028Z,1478854786.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:46.051Z,1478854786.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:46.409Z,1478854786.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:46.435Z,1478854786.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:46.809Z,1478854786.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:46.841Z,1478854786.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:47.209Z,1478854787.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:47.241Z,1478854787.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:47.609Z,1478854787.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:47.693Z,1478854787.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:48.028Z,1478854788.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:48.064Z,1478854788.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:51.506Z,1478854791.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:51.550Z,1478854791.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:51.647Z,1478854791.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:51.690Z,1478854791.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:52.032Z,1478854792.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:52.098Z,1478854792.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:52.428Z,1478854792.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:52.488Z,1478854792.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:52.833Z,1478854792.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:52.849Z,1478854792.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:53.225Z,1478854793.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:53.257Z,1478854793.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:53.625Z,1478854793.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:53.661Z,1478854793.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:54.025Z,1478854794.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:54.061Z,1478854794.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:54.425Z,1478854794.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:54.449Z,1478854794.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:54.833Z,1478854794.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:54.853Z,1478854794.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:55.231Z,1478854795.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:55.247Z,1478854795.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:55.636Z,1478854795.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:55.650Z,1478854795.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:56.032Z,1478854796.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:56.064Z,1478854796.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:56.437Z,1478854796.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:56.460Z,1478854796.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:56.826Z,1478854796.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:56.857Z,1478854796.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:57.225Z,1478854797.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:57.249Z,1478854797.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:57.625Z,1478854797.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:57.653Z,1478854797.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:58.030Z,1478854798.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:58.070Z,1478854798.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:58.436Z,1478854798.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:58.461Z,1478854798.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:58.840Z,1478854798.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:58.873Z,1478854798.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:59.225Z,1478854799.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:59.258Z,1478854799.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T08:59:59.631Z,1478854799.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T08:59:59.651Z,1478854799.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:00.032Z,1478854800.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:00.047Z,1478854800.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:00.437Z,1478854800.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:00.467Z,1478854800.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:00.825Z,1478854800.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:00.857Z,1478854800.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:01.225Z,1478854801.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:01.261Z,1478854801.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:01.625Z,1478854801.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:01.661Z,1478854801.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:02.025Z,1478854802.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:02.061Z,1478854802.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:02.434Z,1478854802.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:02.449Z,1478854802.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:02.833Z,1478854802.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:02.848Z,1478854802.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:03.232Z,1478854803.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:03.247Z,1478854803.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:03.633Z,1478854803.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:03.661Z,1478854803.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:04.049Z,1478854804.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:04.085Z,1478854804.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:04.433Z,1478854804.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:04.517Z,1478854804.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:04.826Z,1478854804.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:04.853Z,1478854804.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:05.240Z,1478854805.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:05.303Z,1478854805.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:05.625Z,1478854805.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:05.659Z,1478854805.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:06.029Z,1478854806.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:06.073Z,1478854806.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:06.438Z,1478854806.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:06.491Z,1478854806.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:06.825Z,1478854806.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:06.845Z,1478854806.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:07.231Z,1478854807.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:07.246Z,1478854807.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:07.632Z,1478854807.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:07.647Z,1478854807.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:08.032Z,1478854808.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:08.053Z,1478854808.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:08.447Z,1478854808.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:08.462Z,1478854808.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:08.833Z,1478854808.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:08.853Z,1478854808.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:09.225Z,1478854809.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:09.258Z,1478854809.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:09.625Z,1478854809.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:09.660Z,1478854809.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:10.027Z,1478854810.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:10.054Z,1478854810.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:10.429Z,1478854810.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:10.461Z,1478854810.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:10.825Z,1478854810.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:10.857Z,1478854810.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:11.225Z,1478854811.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:11.258Z,1478854811.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:11.625Z,1478854811.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:11.650Z,1478854811.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:12.025Z,1478854812.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:12.050Z,1478854812.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:12.436Z,1478854812.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:12.468Z,1478854812.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:12.825Z,1478854812.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:12.857Z,1478854812.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:13.225Z,1478854813.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:13.256Z,1478854813.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:13.625Z,1478854813.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:13.668Z,1478854813.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:14.025Z,1478854814.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:14.061Z,1478854814.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:14.433Z,1478854814.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:14.456Z,1478854814.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:14.832Z,1478854814.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:14.847Z,1478854814.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:15.232Z,1478854815.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:15.246Z,1478854815.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:15.632Z,1478854815.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:15.654Z,1478854815.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:16.025Z,1478854816.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:16.050Z,1478854816.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:16.425Z,1478854816.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:16.457Z,1478854816.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:16.825Z,1478854816.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:16.860Z,1478854816.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:17.225Z,1478854817.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:17.259Z,1478854817.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:17.625Z,1478854817.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:17.650Z,1478854817.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:18.039Z,1478854818.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:18.075Z,1478854818.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:18.425Z,1478854818.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:18.486Z,1478854818.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:18.825Z,1478854818.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:18.840Z,1478854818.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:19.229Z,1478854819.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:19.244Z,1478854819.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:19.625Z,1478854819.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:19.645Z,1478854819.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:20.028Z,1478854820.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:20.049Z,1478854820.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:20.437Z,1478854820.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:20.452Z,1478854820.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:20.831Z,1478854820.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:20.856Z,1478854820.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:21.232Z,1478854821.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:21.247Z,1478854821.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:21.636Z,1478854821.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:21.645Z,1478854821.645 [BPC1](ERROR): Failed to receive battery data
2016-11-11T09:00:21.645Z,1478854821.645 [BPC1] Communications Fault, FailCount= 1
2016-11-11T09:00:21.645Z,1478854821.645 [BPC1](ERROR): Communications Fault
2016-11-11T09:00:21.653Z,1478854821.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:21.699Z,1478854821.699 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T09:00:22.040Z,1478854822.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:22.056Z,1478854822.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:22.425Z,1478854822.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:22.464Z,1478854822.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:22.825Z,1478854822.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:22.857Z,1478854822.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:22.899Z,1478854822.899 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:00:22.899Z,1478854822.899 [BPC1] No Fault, FailCount= 1
2016-11-11T09:00:23.229Z,1478854823.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:23.310Z,1478854823.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:23.625Z,1478854823.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:23.677Z,1478854823.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:24.033Z,1478854824.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:24.062Z,1478854824.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:24.433Z,1478854824.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:24.458Z,1478854824.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:24.825Z,1478854824.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:24.860Z,1478854824.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:25.229Z,1478854825.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:25.268Z,1478854825.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:25.625Z,1478854825.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:25.674Z,1478854825.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:26.025Z,1478854826.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:26.040Z,1478854826.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:26.433Z,1478854826.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:26.453Z,1478854826.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:26.833Z,1478854826.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:26.848Z,1478854826.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:27.231Z,1478854827.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:27.254Z,1478854827.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:27.633Z,1478854827.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:27.648Z,1478854827.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:28.025Z,1478854828.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:28.054Z,1478854828.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:28.425Z,1478854828.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:28.464Z,1478854828.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:28.825Z,1478854828.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:28.854Z,1478854828.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:29.225Z,1478854829.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:29.250Z,1478854829.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:29.625Z,1478854829.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:29.650Z,1478854829.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:30.039Z,1478854830.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:30.058Z,1478854830.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:30.441Z,1478854830.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:30.465Z,1478854830.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:30.825Z,1478854830.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:30.857Z,1478854830.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:31.229Z,1478854831.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:31.256Z,1478854831.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:31.625Z,1478854831.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:31.661Z,1478854831.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:32.027Z,1478854832.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:32.062Z,1478854832.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:32.433Z,1478854832.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:32.470Z,1478854832.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:32.829Z,1478854832.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:32.858Z,1478854832.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:33.233Z,1478854833.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:33.269Z,1478854833.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:33.631Z,1478854833.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:33.665Z,1478854833.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:34.032Z,1478854834.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:34.078Z,1478854834.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:34.441Z,1478854834.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:34.460Z,1478854834.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:34.832Z,1478854834.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:34.852Z,1478854834.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:35.235Z,1478854835.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:35.250Z,1478854835.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:35.636Z,1478854835.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:35.666Z,1478854835.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:36.032Z,1478854836.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:36.097Z,1478854836.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:36.444Z,1478854836.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:36.460Z,1478854836.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:36.826Z,1478854836.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:36.862Z,1478854836.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:37.225Z,1478854837.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:37.269Z,1478854837.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:37.625Z,1478854837.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:37.666Z,1478854837.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:38.025Z,1478854838.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:38.058Z,1478854838.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:38.435Z,1478854838.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:38.466Z,1478854838.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:38.825Z,1478854838.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:38.848Z,1478854838.848 [BPC1](ERROR): Failed to receive battery data
2016-11-11T09:00:38.848Z,1478854838.848 [BPC1] Communications Fault, FailCount= 2
2016-11-11T09:00:38.848Z,1478854838.848 [BPC1](ERROR): Communications Fault
2016-11-11T09:00:38.871Z,1478854838.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:38.915Z,1478854838.915 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T09:00:39.225Z,1478854839.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:39.249Z,1478854839.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:39.633Z,1478854839.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:39.651Z,1478854839.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:40.033Z,1478854840.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:40.053Z,1478854840.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:40.105Z,1478854840.105 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:00:40.105Z,1478854840.105 [BPC1] No Fault, FailCount= 2
2016-11-11T09:00:40.428Z,1478854840.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:40.513Z,1478854840.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:40.832Z,1478854840.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:40.888Z,1478854840.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:41.229Z,1478854841.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:41.261Z,1478854841.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:41.635Z,1478854841.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:41.650Z,1478854841.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:42.040Z,1478854842.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:42.073Z,1478854842.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:42.424Z,1478854842.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:42.454Z,1478854842.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:42.825Z,1478854842.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:42.861Z,1478854842.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:43.227Z,1478854843.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:43.255Z,1478854843.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:43.625Z,1478854843.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:43.661Z,1478854843.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:44.033Z,1478854844.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:44.062Z,1478854844.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:44.426Z,1478854844.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:44.461Z,1478854844.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:44.827Z,1478854844.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:44.856Z,1478854844.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:45.225Z,1478854845.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:45.261Z,1478854845.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:45.625Z,1478854845.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:45.658Z,1478854845.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:46.035Z,1478854846.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:46.061Z,1478854846.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:46.427Z,1478854846.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:46.465Z,1478854846.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:46.825Z,1478854846.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:46.863Z,1478854846.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:46.872Z,1478854846.872 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T09:00:46.872Z,1478854846.872 [Default:CheckIn:C.Wait] Stopped
2016-11-11T09:00:46.872Z,1478854846.872 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T09:00:46.872Z,1478854846.872 [Default:CheckIn:D] Running Loop=1
2016-11-11T09:00:47.225Z,1478854847.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:47.260Z,1478854847.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:47.269Z,1478854847.269 [Default:CheckIn:D] Stopped
2016-11-11T09:00:47.269Z,1478854847.269 [Default:CheckIn:E] Running Loop=1
2016-11-11T09:00:47.627Z,1478854847.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:47.661Z,1478854847.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:47.670Z,1478854847.670 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 250.765983 min 
2016-11-11T09:00:47.670Z,1478854847.670 [Default:CheckIn:E] Stopped
2016-11-11T09:00:47.670Z,1478854847.670 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T09:00:47.670Z,1478854847.670 [Default:CheckIn] Stopped
2016-11-11T09:00:47.670Z,1478854847.671 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T09:00:47.671Z,1478854847.671 [Default:CheckIn](INFO): Running loop #25
2016-11-11T09:00:47.671Z,1478854847.671 [Default:CheckIn] Running Loop=25
2016-11-11T09:00:47.671Z,1478854847.671 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T09:00:47.671Z,1478854847.671 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T09:00:48.028Z,1478854848.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:48.065Z,1478854848.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:51.699Z,1478854851.699 [NAL9602](INFO): Powering up
2016-11-11T09:00:51.716Z,1478854851.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:51.777Z,1478854851.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:51.895Z,1478854851.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:51.941Z,1478854851.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:52.249Z,1478854852.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:52.285Z,1478854852.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:52.653Z,1478854852.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:52.680Z,1478854852.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:53.044Z,1478854853.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:53.089Z,1478854853.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:53.444Z,1478854853.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:53.469Z,1478854853.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:53.887Z,1478854853.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:53.947Z,1478854853.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:54.248Z,1478854854.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:54.316Z,1478854854.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:54.654Z,1478854854.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:54.688Z,1478854854.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:55.046Z,1478854855.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:55.078Z,1478854855.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:55.442Z,1478854855.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:55.465Z,1478854855.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:55.868Z,1478854855.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:55.930Z,1478854855.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:56.241Z,1478854856.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:56.279Z,1478854856.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:56.641Z,1478854856.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:56.678Z,1478854856.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:57.041Z,1478854857.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:57.080Z,1478854857.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:57.441Z,1478854857.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:57.472Z,1478854857.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:57.869Z,1478854857.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:57.914Z,1478854857.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:58.245Z,1478854858.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:58.265Z,1478854858.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:58.647Z,1478854858.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:58.662Z,1478854858.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:59.047Z,1478854859.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:59.063Z,1478854859.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:59.448Z,1478854859.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:59.463Z,1478854859.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:00:59.848Z,1478854859.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:00:59.863Z,1478854859.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:00.241Z,1478854860.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:00.276Z,1478854860.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:00.645Z,1478854860.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:00.677Z,1478854860.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:01.041Z,1478854861.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:01.077Z,1478854861.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:01.445Z,1478854861.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:01.477Z,1478854861.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:01.841Z,1478854861.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:01.856Z,1478854861.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:02.271Z,1478854862.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:02.305Z,1478854862.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:02.633Z,1478854862.633 [NAL9602](INFO): NAL9602 initialized
2016-11-11T09:01:02.649Z,1478854862.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:02.688Z,1478854862.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:03.045Z,1478854863.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:03.081Z,1478854863.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:03.429Z,1478854863.429 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T09:01:03.429Z,1478854863.429 [NAL9602] Data Fault, FailCount= 2
2016-11-11T09:01:03.429Z,1478854863.429 [NAL9602](ERROR): Data Fault
2016-11-11T09:01:03.446Z,1478854863.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:03.489Z,1478854863.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:03.528Z,1478854863.528 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T09:01:03.825Z,1478854863.825 [NAL9602](INFO): Powering down
2016-11-11T09:01:03.845Z,1478854863.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:03.872Z,1478854863.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:03.891Z,1478854863.891 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T09:01:03.891Z,1478854863.891 [Rowe_600LCM] Communications Fault, FailCount= 4
2016-11-11T09:01:03.891Z,1478854863.891 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T09:01:03.916Z,1478854863.917 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T09:01:04.263Z,1478854864.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:04.295Z,1478854864.295 [Rowe_600LCM](INFO): Powering down
2016-11-11T09:01:04.301Z,1478854864.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-11T09:01:04.302Z,1478854864.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:04.651Z,1478854864.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:04.678Z,1478854864.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T09:01:04.679Z,1478854864.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:04.722Z,1478854864.722 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T09:01:04.722Z,1478854864.722 [NAL9602] No Fault, FailCount= 2
2016-11-11T09:01:05.053Z,1478854865.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:05.109Z,1478854865.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T09:01:05.110Z,1478854865.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:05.449Z,1478854865.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:05.470Z,1478854865.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T09:01:05.471Z,1478854865.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:05.841Z,1478854865.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:05.884Z,1478854865.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T09:01:05.886Z,1478854865.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:05.924Z,1478854865.924 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T09:01:05.924Z,1478854865.924 [Rowe_600LCM] No Fault, FailCount= 4
2016-11-11T09:01:06.245Z,1478854866.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:06.260Z,1478854866.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T09:01:06.261Z,1478854866.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:06.315Z,1478854866.315 [Rowe_600LCM](INFO): Initializing
2016-11-11T09:01:06.316Z,1478854866.316 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T09:01:06.316Z,1478854866.316 [Rowe_600LCM](INFO): LCM OK
2016-11-11T09:01:06.316Z,1478854866.316 [Rowe_600LCM](INFO): Powering up
2016-11-11T09:01:06.647Z,1478854866.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:06.712Z,1478854866.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T09:01:06.714Z,1478854866.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:07.047Z,1478854867.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:07.070Z,1478854867.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T09:01:07.071Z,1478854867.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:07.448Z,1478854867.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:07.464Z,1478854867.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T09:01:07.465Z,1478854867.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:07.853Z,1478854867.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:07.909Z,1478854867.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T09:01:07.910Z,1478854867.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:08.249Z,1478854868.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:08.268Z,1478854868.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T09:01:08.269Z,1478854868.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:08.649Z,1478854868.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:08.706Z,1478854868.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T09:01:08.707Z,1478854868.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:09.033Z,1478854869.033 [NAL9602](INFO): Powering up NAL9602
2016-11-11T09:01:09.062Z,1478854869.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:09.110Z,1478854869.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T09:01:09.111Z,1478854869.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:09.441Z,1478854869.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:09.481Z,1478854869.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T09:01:09.482Z,1478854869.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:09.841Z,1478854869.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:09.873Z,1478854869.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T09:01:09.874Z,1478854869.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:10.245Z,1478854870.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:10.276Z,1478854870.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T09:01:10.278Z,1478854870.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:10.465Z,1478854870.465 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T09:01:10.530Z,1478854870.530 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T09:01:10.531Z,1478854870.531 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T09:01:10.532Z,1478854870.532 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T09:01:10.533Z,1478854870.533 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T09:01:10.644Z,1478854870.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:10.671Z,1478854870.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T09:01:10.673Z,1478854870.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:11.041Z,1478854871.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:11.077Z,1478854871.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:11.441Z,1478854871.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:11.461Z,1478854871.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:11.845Z,1478854871.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:11.860Z,1478854871.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:12.248Z,1478854872.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:12.264Z,1478854872.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:12.652Z,1478854872.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:12.673Z,1478854872.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:13.049Z,1478854873.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:13.069Z,1478854873.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:13.448Z,1478854873.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:13.464Z,1478854873.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:13.849Z,1478854873.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:13.869Z,1478854873.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:14.249Z,1478854874.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:14.264Z,1478854874.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:14.648Z,1478854874.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:14.676Z,1478854874.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:15.041Z,1478854875.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:15.077Z,1478854875.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:15.441Z,1478854875.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:15.477Z,1478854875.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:15.841Z,1478854875.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:15.861Z,1478854875.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:16.247Z,1478854876.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:16.288Z,1478854876.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:16.641Z,1478854876.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:16.666Z,1478854876.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:17.056Z,1478854877.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:17.081Z,1478854877.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:17.461Z,1478854877.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:17.507Z,1478854877.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:17.853Z,1478854877.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:17.873Z,1478854877.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:18.248Z,1478854878.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:18.264Z,1478854878.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:18.643Z,1478854878.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:18.675Z,1478854878.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:19.052Z,1478854879.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:19.067Z,1478854879.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:19.444Z,1478854879.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:19.476Z,1478854879.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:19.864Z,1478854879.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:19.878Z,1478854879.878 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T09:01:19.878Z,1478854879.878 [BPC1] Data Fault, FailCount= 1
2016-11-11T09:01:19.878Z,1478854879.878 [BPC1](ERROR): Data Fault
2016-11-11T09:01:19.889Z,1478854879.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:19.949Z,1478854879.949 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:01:20.225Z,1478854880.225 [NAL9602](INFO): NAL9602 initialized
2016-11-11T09:01:20.241Z,1478854880.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:20.281Z,1478854880.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:20.641Z,1478854880.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:20.673Z,1478854880.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:21.052Z,1478854881.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:21.086Z,1478854881.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:21.115Z,1478854881.115 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:01:21.115Z,1478854881.115 [BPC1] No Fault, FailCount= 1
2016-11-11T09:01:21.467Z,1478854881.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:21.534Z,1478854881.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:21.864Z,1478854881.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:21.885Z,1478854881.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:22.242Z,1478854882.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:22.289Z,1478854882.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:22.642Z,1478854882.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:22.685Z,1478854882.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:23.072Z,1478854883.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:23.093Z,1478854883.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:23.470Z,1478854883.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:23.486Z,1478854883.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:23.852Z,1478854883.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:23.885Z,1478854883.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:24.245Z,1478854884.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:24.261Z,1478854884.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:24.649Z,1478854884.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:24.669Z,1478854884.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:25.049Z,1478854885.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:25.069Z,1478854885.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:25.449Z,1478854885.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:25.464Z,1478854885.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:25.853Z,1478854885.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:25.901Z,1478854885.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:26.249Z,1478854886.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:26.263Z,1478854886.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:26.650Z,1478854886.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:26.665Z,1478854886.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:27.057Z,1478854887.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:27.077Z,1478854887.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:27.455Z,1478854887.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:27.474Z,1478854887.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:27.864Z,1478854887.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:27.880Z,1478854887.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:28.260Z,1478854888.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:28.288Z,1478854888.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:28.663Z,1478854888.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:28.678Z,1478854888.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:29.071Z,1478854889.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:29.087Z,1478854889.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:29.441Z,1478854889.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:29.478Z,1478854889.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:29.841Z,1478854889.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:29.877Z,1478854889.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:30.242Z,1478854890.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:30.257Z,1478854890.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:30.649Z,1478854890.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:30.684Z,1478854890.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:31.062Z,1478854891.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:31.086Z,1478854891.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:31.450Z,1478854891.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:31.465Z,1478854891.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:31.846Z,1478854891.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:31.877Z,1478854891.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:32.104Z,1478854892.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:32.241Z,1478854892.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:32.269Z,1478854892.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:32.653Z,1478854892.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:32.668Z,1478854892.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:32.900Z,1478854892.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:33.060Z,1478854893.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:33.113Z,1478854893.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:33.471Z,1478854893.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:33.487Z,1478854893.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:33.864Z,1478854893.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:33.899Z,1478854893.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:34.260Z,1478854894.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:34.322Z,1478854894.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:34.649Z,1478854894.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:34.664Z,1478854894.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:35.049Z,1478854895.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:35.065Z,1478854895.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:35.448Z,1478854895.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:35.504Z,1478854895.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:35.849Z,1478854895.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:35.868Z,1478854895.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:36.250Z,1478854896.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:36.305Z,1478854896.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:36.644Z,1478854896.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:36.691Z,1478854896.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:37.041Z,1478854897.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:37.073Z,1478854897.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:37.450Z,1478854897.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:37.485Z,1478854897.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:37.841Z,1478854897.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:37.878Z,1478854897.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:38.251Z,1478854898.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:38.294Z,1478854898.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:38.664Z,1478854898.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:38.695Z,1478854898.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:39.056Z,1478854899.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:39.071Z,1478854899.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:39.464Z,1478854899.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:39.499Z,1478854899.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:39.850Z,1478854899.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:39.865Z,1478854899.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:40.244Z,1478854900.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:40.272Z,1478854900.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:40.641Z,1478854900.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:40.673Z,1478854900.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:41.041Z,1478854901.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:41.068Z,1478854901.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:41.453Z,1478854901.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:41.475Z,1478854901.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:41.841Z,1478854901.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:41.875Z,1478854901.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:42.261Z,1478854902.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:42.289Z,1478854902.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:42.641Z,1478854902.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:42.673Z,1478854902.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:43.057Z,1478854903.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:43.077Z,1478854903.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:43.459Z,1478854903.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:43.483Z,1478854903.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:43.852Z,1478854903.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:43.886Z,1478854903.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:44.245Z,1478854904.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:44.260Z,1478854904.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:44.648Z,1478854904.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:44.664Z,1478854904.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:45.053Z,1478854905.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:45.090Z,1478854905.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:45.448Z,1478854905.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:45.470Z,1478854905.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:45.845Z,1478854905.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:45.868Z,1478854905.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:46.086Z,1478854906.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:46.245Z,1478854906.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:46.267Z,1478854906.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:46.658Z,1478854906.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:46.673Z,1478854906.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:46.880Z,1478854906.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:47.058Z,1478854907.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:47.082Z,1478854907.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:47.441Z,1478854907.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:47.481Z,1478854907.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:47.841Z,1478854907.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:47.901Z,1478854907.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:48.246Z,1478854908.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:48.261Z,1478854908.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:51.778Z,1478854911.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:51.849Z,1478854911.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:51.939Z,1478854911.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:51.966Z,1478854911.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:52.325Z,1478854912.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:52.390Z,1478854912.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:52.721Z,1478854912.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:52.737Z,1478854912.737 [PNI_TCM](ERROR): CRC does not match. Expected:0x20630 got:0x1857
2016-11-11T09:01:52.774Z,1478854912.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:53.123Z,1478854913.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:53.169Z,1478854913.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:53.535Z,1478854913.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:53.607Z,1478854913.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:53.932Z,1478854913.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:53.973Z,1478854913.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:54.321Z,1478854914.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:54.364Z,1478854914.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:54.724Z,1478854914.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:54.730Z,1478854914.730 [PNI_TCM](ERROR): CRC does not match. Expected:0x52213 got:0x51228
2016-11-11T09:01:54.826Z,1478854914.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:55.132Z,1478854915.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:55.155Z,1478854915.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:55.529Z,1478854915.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:55.559Z,1478854915.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:55.922Z,1478854915.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:55.951Z,1478854915.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:56.323Z,1478854916.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:56.357Z,1478854916.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:56.723Z,1478854916.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:56.783Z,1478854916.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:57.128Z,1478854917.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:57.159Z,1478854917.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:57.528Z,1478854917.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:57.535Z,1478854917.535 [PNI_TCM](ERROR): CRC does not match. Expected:0x27512 got:0x11037
2016-11-11T09:01:57.573Z,1478854917.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:57.937Z,1478854917.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:57.977Z,1478854917.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:58.336Z,1478854918.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:58.357Z,1478854918.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:58.721Z,1478854918.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:58.750Z,1478854918.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:59.122Z,1478854919.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:59.151Z,1478854919.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:59.531Z,1478854919.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:59.557Z,1478854919.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:01:59.922Z,1478854919.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:01:59.948Z,1478854919.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:00.321Z,1478854920.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:00.360Z,1478854920.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:00.736Z,1478854920.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:00.751Z,1478854920.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:01.162Z,1478854921.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:01.178Z,1478854921.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:01.521Z,1478854921.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:01.541Z,1478854921.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:01.938Z,1478854921.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:01.965Z,1478854921.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:02.333Z,1478854922.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:02.353Z,1478854922.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:02.730Z,1478854922.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:02.745Z,1478854922.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:03.146Z,1478854923.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:03.184Z,1478854923.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:03.536Z,1478854923.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:03.552Z,1478854923.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:03.935Z,1478854923.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:03.997Z,1478854923.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:04.326Z,1478854924.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:04.352Z,1478854924.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:04.725Z,1478854924.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:04.805Z,1478854924.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:05.123Z,1478854925.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:05.156Z,1478854925.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:05.522Z,1478854925.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:05.573Z,1478854925.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:05.929Z,1478854925.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:05.969Z,1478854925.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:06.336Z,1478854926.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:06.367Z,1478854926.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:06.745Z,1478854926.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:06.817Z,1478854926.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:07.131Z,1478854927.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:07.163Z,1478854927.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:07.526Z,1478854927.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:07.577Z,1478854927.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:07.928Z,1478854927.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:07.976Z,1478854927.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:08.331Z,1478854928.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:08.347Z,1478854928.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:08.731Z,1478854928.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:08.809Z,1478854928.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:09.121Z,1478854929.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:09.156Z,1478854929.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:09.525Z,1478854929.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:09.557Z,1478854929.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:09.924Z,1478854929.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:09.958Z,1478854929.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:10.323Z,1478854930.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:10.357Z,1478854930.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:10.737Z,1478854930.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:10.844Z,1478854930.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:11.137Z,1478854931.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:11.180Z,1478854931.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:11.523Z,1478854931.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:11.553Z,1478854931.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:11.923Z,1478854931.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:11.950Z,1478854931.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:12.321Z,1478854932.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:12.349Z,1478854932.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:12.721Z,1478854932.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:12.757Z,1478854932.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:13.134Z,1478854933.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:13.162Z,1478854933.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:13.176Z,1478854933.176 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:13.176Z,1478854933.176 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 65
2016-11-11T09:02:13.176Z,1478854933.176 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:02:13.178Z,1478854933.178 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:13.178Z,1478854933.178 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 65
2016-11-11T09:02:13.178Z,1478854933.178 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:02:13.213Z,1478854933.213 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:02:13.214Z,1478854933.214 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:02:13.522Z,1478854933.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:13.553Z,1478854933.553 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:13.554Z,1478854933.554 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2016-11-11T09:02:13.554Z,1478854933.554 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:02:13.597Z,1478854933.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:02:13.597Z,1478854933.597 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:02:13.597Z,1478854933.597 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 65
2016-11-11T09:02:13.598Z,1478854933.598 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:02:13.598Z,1478854933.598 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 65
2016-11-11T09:02:13.921Z,1478854933.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:13.967Z,1478854933.967 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:02:13.967Z,1478854933.967 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:02:13.968Z,1478854933.968 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:02:13.968Z,1478854933.968 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:02:13.969Z,1478854933.969 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:02:13.969Z,1478854933.969 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:02:13.982Z,1478854933.982 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:02:13.982Z,1478854933.982 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2016-11-11T09:02:14.321Z,1478854934.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:14.356Z,1478854934.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:02:14.357Z,1478854934.357 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:02:14.357Z,1478854934.357 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:02:14.724Z,1478854934.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:14.739Z,1478854934.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:15.152Z,1478854935.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:15.185Z,1478854935.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:15.536Z,1478854935.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:15.566Z,1478854935.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:15.921Z,1478854935.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:15.947Z,1478854935.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:16.324Z,1478854936.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:16.359Z,1478854936.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:16.722Z,1478854936.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:16.753Z,1478854936.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:17.146Z,1478854937.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:17.200Z,1478854937.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:17.522Z,1478854937.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:17.557Z,1478854937.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:17.923Z,1478854937.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:17.938Z,1478854937.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:18.325Z,1478854938.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:18.341Z,1478854938.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:18.739Z,1478854938.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:18.837Z,1478854938.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:19.147Z,1478854939.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:19.162Z,1478854939.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:19.540Z,1478854939.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:19.568Z,1478854939.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:19.921Z,1478854939.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:19.974Z,1478854939.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:20.321Z,1478854940.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:20.358Z,1478854940.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:20.728Z,1478854940.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:20.779Z,1478854940.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:21.126Z,1478854941.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:21.178Z,1478854941.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:21.522Z,1478854941.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:21.541Z,1478854941.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:21.929Z,1478854941.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:21.981Z,1478854941.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:22.327Z,1478854942.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:22.342Z,1478854942.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:22.770Z,1478854942.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:22.833Z,1478854942.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:23.121Z,1478854943.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:23.138Z,1478854943.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:23.522Z,1478854943.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:23.569Z,1478854943.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:23.922Z,1478854943.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:23.938Z,1478854943.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:24.321Z,1478854944.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:24.342Z,1478854944.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:24.776Z,1478854944.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:24.814Z,1478854944.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:25.121Z,1478854945.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:25.141Z,1478854945.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:25.529Z,1478854945.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:25.545Z,1478854945.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:25.929Z,1478854945.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:25.944Z,1478854945.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:26.327Z,1478854946.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:26.343Z,1478854946.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:26.728Z,1478854946.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:26.743Z,1478854946.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:27.121Z,1478854947.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:27.161Z,1478854947.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:27.521Z,1478854947.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:27.553Z,1478854947.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:27.940Z,1478854947.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:27.979Z,1478854947.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:28.344Z,1478854948.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:28.369Z,1478854948.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:28.721Z,1478854948.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:28.757Z,1478854948.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:29.128Z,1478854949.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:29.174Z,1478854949.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:29.526Z,1478854949.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:29.557Z,1478854949.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:29.924Z,1478854949.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:29.950Z,1478854949.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:30.328Z,1478854950.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:30.343Z,1478854950.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:30.729Z,1478854950.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:30.749Z,1478854950.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:31.138Z,1478854951.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:31.170Z,1478854951.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:31.521Z,1478854951.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:31.553Z,1478854951.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:31.921Z,1478854951.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:31.948Z,1478854951.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:32.343Z,1478854952.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:32.359Z,1478854952.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:32.756Z,1478854952.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:32.807Z,1478854952.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:33.122Z,1478854953.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:33.158Z,1478854953.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:33.525Z,1478854953.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:33.585Z,1478854953.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:33.921Z,1478854953.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:33.952Z,1478854953.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:34.321Z,1478854954.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:34.341Z,1478854954.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:34.735Z,1478854954.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:34.787Z,1478854954.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:35.121Z,1478854955.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:35.136Z,1478854955.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:35.521Z,1478854955.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:35.541Z,1478854955.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:35.928Z,1478854955.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:35.943Z,1478854955.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:36.327Z,1478854956.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:36.342Z,1478854956.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:36.757Z,1478854956.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:36.795Z,1478854956.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:37.134Z,1478854957.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:37.158Z,1478854957.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:37.521Z,1478854957.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:37.553Z,1478854957.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:37.921Z,1478854957.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:37.939Z,1478854957.939 [BPC1](ERROR): Failed to receive battery data
2016-11-11T09:02:37.939Z,1478854957.940 [BPC1] Communications Fault, FailCount= 1
2016-11-11T09:02:37.940Z,1478854957.940 [BPC1](ERROR): Communications Fault
2016-11-11T09:02:37.965Z,1478854957.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:38.008Z,1478854958.008 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T09:02:38.321Z,1478854958.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:38.341Z,1478854958.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:38.743Z,1478854958.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:38.780Z,1478854958.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:39.126Z,1478854959.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:39.145Z,1478854959.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:39.193Z,1478854959.193 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:02:39.193Z,1478854959.193 [BPC1] No Fault, FailCount= 1
2016-11-11T09:02:39.529Z,1478854959.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:39.611Z,1478854959.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:39.929Z,1478854959.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:39.949Z,1478854959.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:40.329Z,1478854960.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:40.349Z,1478854960.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:40.728Z,1478854960.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:40.818Z,1478854960.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:41.124Z,1478854961.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:41.156Z,1478854961.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:41.529Z,1478854961.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:41.549Z,1478854961.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:41.925Z,1478854961.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:41.947Z,1478854961.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:42.324Z,1478854962.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:42.357Z,1478854962.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:42.733Z,1478854962.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:42.749Z,1478854962.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:43.123Z,1478854963.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:43.212Z,1478854963.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:43.529Z,1478854963.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:43.582Z,1478854963.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:43.921Z,1478854963.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:43.958Z,1478854963.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:44.321Z,1478854964.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:44.358Z,1478854964.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:44.725Z,1478854964.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:44.757Z,1478854964.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:45.145Z,1478854965.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:45.160Z,1478854965.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:45.532Z,1478854965.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:45.567Z,1478854965.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:45.921Z,1478854965.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:45.938Z,1478854965.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:46.321Z,1478854966.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:46.336Z,1478854966.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:46.731Z,1478854966.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:46.764Z,1478854966.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:47.125Z,1478854967.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:47.150Z,1478854967.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:47.526Z,1478854967.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:47.549Z,1478854967.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:47.921Z,1478854967.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:47.957Z,1478854967.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:48.326Z,1478854968.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:48.341Z,1478854968.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:56.414Z,1478854976.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:56.511Z,1478854976.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:56.661Z,1478854976.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:56.710Z,1478854976.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:57.037Z,1478854977.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:57.118Z,1478854977.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:57.426Z,1478854977.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:57.482Z,1478854977.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:57.576Z,1478854977.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:57.827Z,1478854977.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:57.869Z,1478854977.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:58.241Z,1478854978.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:58.248Z,1478854978.248 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T09:02:58.298Z,1478854978.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:58.372Z,1478854978.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:58.637Z,1478854978.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:58.685Z,1478854978.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:59.111Z,1478854979.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:59.200Z,1478854979.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:59.435Z,1478854979.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:59.498Z,1478854979.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:02:59.835Z,1478854979.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:02:59.851Z,1478854979.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:00.229Z,1478854980.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:00.249Z,1478854980.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:00.642Z,1478854980.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:00.736Z,1478854980.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:01.021Z,1478854981.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:01.081Z,1478854981.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:01.427Z,1478854981.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:01.442Z,1478854981.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:01.832Z,1478854981.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:01.853Z,1478854981.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:02.247Z,1478854982.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:02.271Z,1478854982.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:02.621Z,1478854982.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:02.777Z,1478854982.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:03.036Z,1478854983.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:03.042Z,1478854983.042 [PNI_TCM](ERROR): CRC does not match. Expected:0x23188 got:0x192
2016-11-11T09:03:03.106Z,1478854983.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:03.426Z,1478854983.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:03.481Z,1478854983.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:03.831Z,1478854983.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:03.859Z,1478854983.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:04.222Z,1478854984.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:04.264Z,1478854984.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:04.626Z,1478854984.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:04.701Z,1478854984.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:05.026Z,1478854985.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:05.068Z,1478854985.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:05.433Z,1478854985.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:05.477Z,1478854985.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:05.825Z,1478854985.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:05.877Z,1478854985.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:06.225Z,1478854986.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:06.266Z,1478854986.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:06.455Z,1478854986.455 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-11T09:03:06.455Z,1478854986.455 [Rowe_600LCM] Communications Fault, FailCount= 5
2016-11-11T09:03:06.455Z,1478854986.455 [Rowe_600LCM](ERROR): Communications Fault
2016-11-11T09:03:06.641Z,1478854986.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:06.732Z,1478854986.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.5 s old, using for 20.0 s.
2016-11-11T09:03:06.733Z,1478854986.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:06.801Z,1478854986.801 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-11T09:03:06.802Z,1478854986.802 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2016-11-11T09:03:06.859Z,1478854986.859 [Rowe_600LCM](INFO): Powering down
2016-11-11T09:03:07.042Z,1478854987.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:07.073Z,1478854987.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-11T09:03:07.074Z,1478854987.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:07.434Z,1478854987.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:07.454Z,1478854987.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T09:03:07.455Z,1478854987.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:07.832Z,1478854987.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:07.857Z,1478854987.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T09:03:07.858Z,1478854987.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:08.223Z,1478854988.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:08.272Z,1478854988.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T09:03:08.274Z,1478854988.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:08.623Z,1478854988.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:08.656Z,1478854988.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T09:03:08.657Z,1478854988.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:09.026Z,1478854989.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:09.070Z,1478854989.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T09:03:09.079Z,1478854989.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:09.425Z,1478854989.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:09.493Z,1478854989.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T09:03:09.494Z,1478854989.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:09.823Z,1478854989.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:09.869Z,1478854989.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T09:03:09.870Z,1478854989.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:10.222Z,1478854990.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:10.253Z,1478854990.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T09:03:10.254Z,1478854990.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:10.633Z,1478854990.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:10.714Z,1478854990.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T09:03:10.716Z,1478854990.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:11.038Z,1478854991.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:11.076Z,1478854991.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T09:03:11.078Z,1478854991.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:11.446Z,1478854991.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:11.497Z,1478854991.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T09:03:11.498Z,1478854991.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:11.828Z,1478854991.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:11.864Z,1478854991.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T09:03:11.866Z,1478854991.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:12.233Z,1478854992.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:12.285Z,1478854992.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T09:03:12.286Z,1478854992.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:12.633Z,1478854992.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:12.657Z,1478854992.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T09:03:12.658Z,1478854992.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:13.023Z,1478854993.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:13.098Z,1478854993.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T09:03:13.100Z,1478854993.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:13.427Z,1478854993.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:13.446Z,1478854993.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T09:03:13.452Z,1478854993.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:13.844Z,1478854993.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:13.892Z,1478854993.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T09:03:13.893Z,1478854993.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:14.225Z,1478854994.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:14.265Z,1478854994.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T09:03:14.266Z,1478854994.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:14.651Z,1478854994.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:14.674Z,1478854994.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T09:03:14.675Z,1478854994.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:15.033Z,1478854995.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:15.048Z,1478854995.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T09:03:15.049Z,1478854995.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:15.432Z,1478854995.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:15.446Z,1478854995.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T09:03:15.448Z,1478854995.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:15.823Z,1478854995.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:15.842Z,1478854995.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T09:03:15.848Z,1478854995.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:16.221Z,1478854996.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:16.253Z,1478854996.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T09:03:16.254Z,1478854996.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:16.628Z,1478854996.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:16.696Z,1478854996.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T09:03:16.697Z,1478854996.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:17.024Z,1478854997.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:17.058Z,1478854997.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T09:03:17.059Z,1478854997.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:17.425Z,1478854997.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:17.450Z,1478854997.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T09:03:17.451Z,1478854997.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:17.821Z,1478854997.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:17.840Z,1478854997.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T09:03:17.841Z,1478854997.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:18.225Z,1478854998.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:18.240Z,1478854998.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T09:03:18.241Z,1478854998.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:18.626Z,1478854998.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:18.653Z,1478854998.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T09:03:18.654Z,1478854998.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:19.030Z,1478854999.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:19.044Z,1478854999.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T09:03:19.045Z,1478854999.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:19.443Z,1478854999.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:19.458Z,1478854999.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T09:03:19.459Z,1478854999.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:19.832Z,1478854999.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:19.866Z,1478854999.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T09:03:19.868Z,1478854999.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:20.223Z,1478855000.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:20.264Z,1478855000.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T09:03:20.265Z,1478855000.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:20.621Z,1478855000.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:20.661Z,1478855000.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T09:03:20.662Z,1478855000.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:21.025Z,1478855001.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:21.061Z,1478855001.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T09:03:21.062Z,1478855001.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:21.429Z,1478855001.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:21.448Z,1478855001.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T09:03:21.449Z,1478855001.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:21.822Z,1478855001.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:21.853Z,1478855001.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T09:03:21.854Z,1478855001.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:22.221Z,1478855002.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:22.257Z,1478855002.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T09:03:22.258Z,1478855002.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:22.626Z,1478855002.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:22.652Z,1478855002.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T09:03:22.654Z,1478855002.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:23.021Z,1478855003.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:23.041Z,1478855003.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T09:03:23.042Z,1478855003.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:23.425Z,1478855003.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:23.445Z,1478855003.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T09:03:23.446Z,1478855003.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:23.835Z,1478855003.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:23.888Z,1478855003.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T09:03:23.890Z,1478855003.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:24.225Z,1478855004.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:24.252Z,1478855004.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T09:03:24.253Z,1478855004.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:24.632Z,1478855004.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:24.733Z,1478855004.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2016-11-11T09:03:24.734Z,1478855004.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:25.028Z,1478855005.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:25.053Z,1478855005.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T09:03:25.054Z,1478855005.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:25.423Z,1478855005.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:25.455Z,1478855005.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T09:03:25.460Z,1478855005.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:25.821Z,1478855005.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:25.865Z,1478855005.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T09:03:25.866Z,1478855005.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:26.221Z,1478855006.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:26.257Z,1478855006.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2016-11-11T09:03:26.258Z,1478855006.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:26.621Z,1478855006.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:26.665Z,1478855006.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:27.021Z,1478855007.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:27.069Z,1478855007.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:27.421Z,1478855007.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:27.465Z,1478855007.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:27.821Z,1478855007.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:27.861Z,1478855007.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:28.222Z,1478855008.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:28.237Z,1478855008.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:28.626Z,1478855008.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:28.653Z,1478855008.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:29.024Z,1478855009.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:29.057Z,1478855009.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:29.422Z,1478855009.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:29.454Z,1478855009.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:29.821Z,1478855009.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:29.863Z,1478855009.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:30.221Z,1478855010.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:30.237Z,1478855010.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:30.621Z,1478855010.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:30.638Z,1478855010.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:31.028Z,1478855011.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:31.049Z,1478855011.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:31.421Z,1478855011.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:31.442Z,1478855011.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:31.828Z,1478855011.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:31.850Z,1478855011.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:32.228Z,1478855012.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:32.249Z,1478855012.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:32.624Z,1478855012.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:32.702Z,1478855012.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:33.021Z,1478855013.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:33.041Z,1478855013.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:33.425Z,1478855013.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:33.445Z,1478855013.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:33.827Z,1478855013.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:33.842Z,1478855013.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:34.227Z,1478855014.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:34.242Z,1478855014.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:34.625Z,1478855014.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:34.653Z,1478855014.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:35.024Z,1478855015.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:35.056Z,1478855015.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:35.422Z,1478855015.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:35.448Z,1478855015.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:35.821Z,1478855015.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:35.857Z,1478855015.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:36.229Z,1478855016.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:36.265Z,1478855016.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:36.625Z,1478855016.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:36.669Z,1478855016.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:37.021Z,1478855017.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:37.041Z,1478855017.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:37.425Z,1478855017.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:37.440Z,1478855017.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:37.826Z,1478855017.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:37.841Z,1478855017.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:38.229Z,1478855018.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:38.293Z,1478855018.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:38.624Z,1478855018.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:38.652Z,1478855018.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:39.028Z,1478855019.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:39.045Z,1478855019.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:39.421Z,1478855019.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:39.481Z,1478855019.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:39.821Z,1478855019.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:39.857Z,1478855019.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:40.227Z,1478855020.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:40.242Z,1478855020.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:40.628Z,1478855020.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:40.678Z,1478855020.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:41.026Z,1478855021.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:41.042Z,1478855021.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:41.424Z,1478855021.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:41.474Z,1478855021.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:41.822Z,1478855021.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:41.876Z,1478855021.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:42.209Z,1478855022.209 [NAL9602](INFO): SBD MO Status=2, MOMSN=341, MT Status=2, MTMSN=0
2016-11-11T09:03:42.209Z,1478855022.210 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T09:03:42.226Z,1478855022.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:42.242Z,1478855022.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:42.640Z,1478855022.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:42.654Z,1478855022.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:43.030Z,1478855023.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:43.044Z,1478855023.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:43.424Z,1478855023.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:43.456Z,1478855023.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:43.821Z,1478855023.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:43.854Z,1478855023.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:44.221Z,1478855024.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:44.256Z,1478855024.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:44.621Z,1478855024.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:44.657Z,1478855024.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:45.021Z,1478855025.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:45.056Z,1478855025.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:45.421Z,1478855025.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:45.458Z,1478855025.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:45.821Z,1478855025.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:45.853Z,1478855025.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:46.221Z,1478855026.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:46.256Z,1478855026.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:46.645Z,1478855026.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:46.660Z,1478855026.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:47.021Z,1478855027.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:47.057Z,1478855027.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:47.421Z,1478855027.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:47.456Z,1478855027.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:47.822Z,1478855027.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:47.860Z,1478855027.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:48.221Z,1478855028.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:48.257Z,1478855028.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:48.630Z,1478855028.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:48.655Z,1478855028.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:51.984Z,1478855031.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:52.018Z,1478855032.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:52.097Z,1478855032.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:52.137Z,1478855032.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:52.472Z,1478855032.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:52.533Z,1478855032.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:52.872Z,1478855032.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:52.907Z,1478855032.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:53.265Z,1478855033.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:53.297Z,1478855033.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:53.673Z,1478855033.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:53.755Z,1478855033.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:54.065Z,1478855034.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:54.103Z,1478855034.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:54.465Z,1478855034.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:54.502Z,1478855034.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:54.865Z,1478855034.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:54.921Z,1478855034.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:55.266Z,1478855035.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:55.310Z,1478855035.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:55.665Z,1478855035.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:55.714Z,1478855035.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:56.065Z,1478855036.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:56.115Z,1478855036.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:56.465Z,1478855036.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:56.485Z,1478855036.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:56.866Z,1478855036.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:56.890Z,1478855036.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:57.275Z,1478855037.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:57.290Z,1478855037.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:57.673Z,1478855037.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:57.688Z,1478855037.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:58.068Z,1478855038.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:58.100Z,1478855038.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:58.465Z,1478855038.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:58.499Z,1478855038.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:58.865Z,1478855038.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:58.900Z,1478855038.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:59.250Z,1478855039.250 [NAL9602](INFO): SBD MO Status=2, MOMSN=341, MT Status=2, MTMSN=0
2016-11-11T09:03:59.250Z,1478855039.250 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T09:03:59.267Z,1478855039.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:59.309Z,1478855039.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:03:59.675Z,1478855039.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:03:59.700Z,1478855039.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:00.065Z,1478855040.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:00.109Z,1478855040.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:00.466Z,1478855040.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:00.505Z,1478855040.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:00.865Z,1478855040.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:00.885Z,1478855040.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:01.266Z,1478855041.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:01.293Z,1478855041.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:01.668Z,1478855041.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:01.696Z,1478855041.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:02.073Z,1478855042.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:02.093Z,1478855042.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:02.465Z,1478855042.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:02.500Z,1478855042.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:02.865Z,1478855042.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:02.891Z,1478855042.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:03.265Z,1478855043.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:03.290Z,1478855043.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:03.692Z,1478855043.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:03.713Z,1478855043.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:04.080Z,1478855044.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:04.113Z,1478855044.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:04.465Z,1478855044.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:04.497Z,1478855044.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:04.866Z,1478855044.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:04.909Z,1478855044.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:05.265Z,1478855045.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:05.302Z,1478855045.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:05.673Z,1478855045.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:05.701Z,1478855045.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:06.065Z,1478855046.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:06.081Z,1478855046.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:06.465Z,1478855046.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:06.498Z,1478855046.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:06.869Z,1478855046.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:06.894Z,1478855046.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:07.265Z,1478855047.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:07.323Z,1478855047.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:07.665Z,1478855047.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:07.705Z,1478855047.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:08.080Z,1478855048.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:08.109Z,1478855048.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:08.475Z,1478855048.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:08.550Z,1478855048.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:08.866Z,1478855048.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:08.890Z,1478855048.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:09.272Z,1478855049.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:09.287Z,1478855049.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:09.677Z,1478855049.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:09.697Z,1478855049.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:10.070Z,1478855050.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:10.157Z,1478855050.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:10.466Z,1478855050.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:10.490Z,1478855050.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:10.865Z,1478855050.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:10.914Z,1478855050.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:11.265Z,1478855051.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:11.331Z,1478855051.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:11.665Z,1478855051.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:11.690Z,1478855051.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:12.070Z,1478855052.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:12.097Z,1478855052.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:12.485Z,1478855052.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:12.519Z,1478855052.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:12.884Z,1478855052.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:12.919Z,1478855052.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:13.288Z,1478855053.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:13.313Z,1478855053.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:13.676Z,1478855053.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:13.709Z,1478855053.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:14.072Z,1478855054.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:14.091Z,1478855054.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:14.469Z,1478855054.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:14.489Z,1478855054.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:14.868Z,1478855054.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:14.902Z,1478855054.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:15.272Z,1478855055.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:15.302Z,1478855055.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:15.673Z,1478855055.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:15.710Z,1478855055.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:16.065Z,1478855056.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:16.090Z,1478855056.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:16.465Z,1478855056.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:16.503Z,1478855056.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:16.866Z,1478855056.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:16.903Z,1478855056.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:17.285Z,1478855057.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:17.309Z,1478855057.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:17.675Z,1478855057.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:17.717Z,1478855057.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:18.090Z,1478855058.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:18.114Z,1478855058.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:18.476Z,1478855058.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:18.517Z,1478855058.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:18.868Z,1478855058.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:18.906Z,1478855058.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:19.269Z,1478855059.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:19.306Z,1478855059.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:19.669Z,1478855059.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:19.689Z,1478855059.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:20.072Z,1478855060.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:20.095Z,1478855060.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:20.474Z,1478855060.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:20.492Z,1478855060.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:20.872Z,1478855060.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:20.921Z,1478855060.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:21.271Z,1478855061.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:21.286Z,1478855061.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:21.672Z,1478855061.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:21.729Z,1478855061.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:22.086Z,1478855062.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:22.120Z,1478855062.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:22.482Z,1478855062.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:22.500Z,1478855062.500 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T09:04:22.500Z,1478855062.500 [BPC1] Data Fault, FailCount= 1
2016-11-11T09:04:22.500Z,1478855062.500 [BPC1](ERROR): Data Fault
2016-11-11T09:04:22.541Z,1478855062.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:22.578Z,1478855062.578 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:04:22.876Z,1478855062.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:22.901Z,1478855062.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:23.265Z,1478855063.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:23.301Z,1478855063.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:23.665Z,1478855063.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:23.700Z,1478855063.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:23.720Z,1478855063.720 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:04:23.720Z,1478855063.720 [BPC1] No Fault, FailCount= 1
2016-11-11T09:04:24.089Z,1478855064.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:24.173Z,1478855064.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:24.465Z,1478855064.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:24.501Z,1478855064.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:24.873Z,1478855064.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:24.925Z,1478855064.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:25.272Z,1478855065.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:25.304Z,1478855065.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:25.670Z,1478855065.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:25.707Z,1478855065.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:26.077Z,1478855066.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:26.107Z,1478855066.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:26.470Z,1478855066.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:26.489Z,1478855066.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:26.875Z,1478855066.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:26.890Z,1478855066.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:27.276Z,1478855067.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:27.317Z,1478855067.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:27.668Z,1478855067.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:27.701Z,1478855067.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:28.069Z,1478855068.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:28.095Z,1478855068.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:28.467Z,1478855068.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:28.502Z,1478855068.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:28.866Z,1478855068.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:28.905Z,1478855068.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:29.266Z,1478855069.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:29.299Z,1478855069.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:29.666Z,1478855069.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:29.697Z,1478855069.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:30.069Z,1478855070.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:30.109Z,1478855070.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:30.467Z,1478855070.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:30.502Z,1478855070.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:30.865Z,1478855070.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:30.904Z,1478855070.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:31.266Z,1478855071.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:31.305Z,1478855071.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:31.667Z,1478855071.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:31.692Z,1478855071.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:32.065Z,1478855072.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:32.108Z,1478855072.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:32.465Z,1478855072.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:32.486Z,1478855072.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:32.871Z,1478855072.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:32.887Z,1478855072.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:33.271Z,1478855073.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:33.286Z,1478855073.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:33.669Z,1478855073.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:33.718Z,1478855073.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:34.074Z,1478855074.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:34.092Z,1478855074.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:34.473Z,1478855074.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:34.493Z,1478855074.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:34.876Z,1478855074.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:34.897Z,1478855074.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:35.269Z,1478855075.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:35.333Z,1478855075.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:35.677Z,1478855075.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:35.684Z,1478855075.684 [PNI_TCM](ERROR): CRC does not match. Expected:0x52715 got:0x42919
2016-11-11T09:04:35.709Z,1478855075.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:36.077Z,1478855076.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:36.092Z,1478855076.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:36.472Z,1478855076.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:36.498Z,1478855076.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:36.887Z,1478855076.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:36.969Z,1478855076.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:37.266Z,1478855077.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:37.306Z,1478855077.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:37.667Z,1478855077.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:37.674Z,1478855077.674 [PNI_TCM](ERROR): CRC does not match. Expected:0x39280 got:0x16846
2016-11-11T09:04:37.735Z,1478855077.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:38.067Z,1478855078.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:38.100Z,1478855078.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:38.465Z,1478855078.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:38.518Z,1478855078.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:38.866Z,1478855078.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:38.925Z,1478855078.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:39.268Z,1478855079.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:39.304Z,1478855079.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:39.667Z,1478855079.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:39.706Z,1478855079.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:40.069Z,1478855080.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:40.105Z,1478855080.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:40.467Z,1478855080.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:40.475Z,1478855080.475 [PNI_TCM](ERROR): CRC does not match. Expected:0x41323 got:0x49581
2016-11-11T09:04:40.509Z,1478855080.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:40.868Z,1478855080.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:40.905Z,1478855080.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:41.270Z,1478855081.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:41.315Z,1478855081.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:41.665Z,1478855081.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:41.705Z,1478855081.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:42.050Z,1478855082.050 [NAL9602](INFO): SBD MO Status=2, MOMSN=341, MT Status=2, MTMSN=0
2016-11-11T09:04:42.050Z,1478855082.050 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T09:04:42.069Z,1478855082.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:42.076Z,1478855082.076 [PNI_TCM](ERROR): CRC does not match. Expected:0x33153 got:0x6591
2016-11-11T09:04:42.119Z,1478855082.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:42.480Z,1478855082.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:42.513Z,1478855082.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:42.865Z,1478855082.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:42.905Z,1478855082.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:43.265Z,1478855083.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:43.301Z,1478855083.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:43.668Z,1478855083.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:43.674Z,1478855083.674 [PNI_TCM](ERROR): CRC does not match. Expected:0x43180 got:0x4522
2016-11-11T09:04:43.709Z,1478855083.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:44.072Z,1478855084.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:44.086Z,1478855084.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:44.470Z,1478855084.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:44.485Z,1478855084.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:44.870Z,1478855084.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:44.891Z,1478855084.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:45.275Z,1478855085.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:45.290Z,1478855085.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:45.675Z,1478855085.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:45.690Z,1478855085.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:46.068Z,1478855086.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:46.096Z,1478855086.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:46.492Z,1478855086.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:46.513Z,1478855086.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:46.887Z,1478855086.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:46.909Z,1478855086.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:47.267Z,1478855087.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:47.292Z,1478855087.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:47.665Z,1478855087.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:47.697Z,1478855087.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:48.068Z,1478855088.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:48.094Z,1478855088.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:48.472Z,1478855088.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:48.507Z,1478855088.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:48.869Z,1478855088.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:48.901Z,1478855088.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:52.128Z,1478855092.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:52.221Z,1478855092.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:52.326Z,1478855092.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:52.369Z,1478855092.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:52.693Z,1478855092.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:52.765Z,1478855092.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:53.089Z,1478855093.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:53.146Z,1478855093.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:53.489Z,1478855093.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:53.506Z,1478855093.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:53.895Z,1478855093.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:53.948Z,1478855093.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:54.296Z,1478855094.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:54.349Z,1478855094.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:54.689Z,1478855094.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:54.705Z,1478855094.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:55.097Z,1478855095.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:55.113Z,1478855095.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:55.496Z,1478855095.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:55.513Z,1478855095.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:55.900Z,1478855095.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:55.925Z,1478855095.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:56.296Z,1478855096.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:56.311Z,1478855096.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:56.696Z,1478855096.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:56.741Z,1478855096.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:57.097Z,1478855097.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:57.133Z,1478855097.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:57.495Z,1478855097.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:57.509Z,1478855097.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:57.896Z,1478855097.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:57.932Z,1478855097.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:58.308Z,1478855098.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:58.365Z,1478855098.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:58.700Z,1478855098.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:58.725Z,1478855098.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:59.093Z,1478855099.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:59.117Z,1478855099.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:59.500Z,1478855099.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:59.561Z,1478855099.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:04:59.889Z,1478855099.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:04:59.925Z,1478855099.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:00.289Z,1478855100.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:00.329Z,1478855100.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:00.689Z,1478855100.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:00.729Z,1478855100.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:01.089Z,1478855101.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:01.127Z,1478855101.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:01.489Z,1478855101.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:01.524Z,1478855101.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:01.889Z,1478855101.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:01.925Z,1478855101.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:02.289Z,1478855102.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:02.333Z,1478855102.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:02.703Z,1478855102.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:02.739Z,1478855102.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:03.100Z,1478855103.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:03.127Z,1478855103.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:03.493Z,1478855103.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:03.507Z,1478855103.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:03.897Z,1478855103.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:03.919Z,1478855103.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:04.293Z,1478855104.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:04.315Z,1478855104.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:04.696Z,1478855104.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:04.711Z,1478855104.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:05.096Z,1478855105.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:05.125Z,1478855105.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:05.492Z,1478855105.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:05.523Z,1478855105.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:05.896Z,1478855105.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:05.914Z,1478855105.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:06.289Z,1478855106.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:06.349Z,1478855106.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:06.689Z,1478855106.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:06.709Z,1478855106.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:07.095Z,1478855107.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:07.137Z,1478855107.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:07.489Z,1478855107.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:07.519Z,1478855107.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:07.892Z,1478855107.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:07.939Z,1478855107.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:08.296Z,1478855108.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:08.347Z,1478855108.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:08.697Z,1478855108.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:08.714Z,1478855108.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:09.101Z,1478855109.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:09.122Z,1478855109.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:09.500Z,1478855109.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:09.559Z,1478855109.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:09.896Z,1478855109.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:09.948Z,1478855109.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:10.292Z,1478855110.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:10.307Z,1478855110.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:10.692Z,1478855110.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:10.717Z,1478855110.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:11.103Z,1478855111.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:11.141Z,1478855111.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:11.504Z,1478855111.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:11.537Z,1478855111.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:11.896Z,1478855111.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:11.940Z,1478855111.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:12.296Z,1478855112.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:12.321Z,1478855112.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:12.692Z,1478855112.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:12.724Z,1478855112.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:13.096Z,1478855113.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:13.111Z,1478855113.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:13.489Z,1478855113.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:13.525Z,1478855113.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:13.901Z,1478855113.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:13.927Z,1478855113.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:14.289Z,1478855114.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:14.336Z,1478855114.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:14.342Z,1478855114.342 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:14.342Z,1478855114.342 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 66
2016-11-11T09:05:14.342Z,1478855114.342 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:05:14.344Z,1478855114.344 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:14.344Z,1478855114.344 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 66
2016-11-11T09:05:14.344Z,1478855114.344 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:05:14.378Z,1478855114.378 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:05:14.379Z,1478855114.379 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:05:14.689Z,1478855114.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:14.736Z,1478855114.736 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:14.736Z,1478855114.736 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2016-11-11T09:05:14.736Z,1478855114.736 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:05:14.798Z,1478855114.798 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:05:14.798Z,1478855114.798 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:05:14.799Z,1478855114.799 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 66
2016-11-11T09:05:14.799Z,1478855114.799 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:05:14.799Z,1478855114.799 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 66
2016-11-11T09:05:15.101Z,1478855115.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:15.144Z,1478855115.144 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:05:15.145Z,1478855115.145 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:05:15.145Z,1478855115.145 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:05:15.145Z,1478855115.145 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:05:15.146Z,1478855115.146 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:05:15.146Z,1478855115.146 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:05:15.172Z,1478855115.172 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:05:15.172Z,1478855115.172 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2016-11-11T09:05:15.508Z,1478855115.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:15.548Z,1478855115.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:05:15.548Z,1478855115.548 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:05:15.549Z,1478855115.549 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:05:15.911Z,1478855115.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:15.931Z,1478855115.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T09:05:15.932Z,1478855115.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:16.289Z,1478855116.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:16.324Z,1478855116.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T09:05:16.324Z,1478855116.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:16.689Z,1478855116.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:16.727Z,1478855116.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T09:05:16.728Z,1478855116.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:17.089Z,1478855117.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:17.129Z,1478855117.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T09:05:17.130Z,1478855117.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:17.489Z,1478855117.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:17.519Z,1478855117.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T09:05:17.524Z,1478855117.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:17.893Z,1478855117.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:17.929Z,1478855117.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T09:05:17.930Z,1478855117.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:18.289Z,1478855118.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:18.336Z,1478855118.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T09:05:18.337Z,1478855118.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:18.689Z,1478855118.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:18.725Z,1478855118.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T09:05:18.726Z,1478855118.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:19.093Z,1478855119.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:19.136Z,1478855119.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T09:05:19.137Z,1478855119.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:19.497Z,1478855119.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:19.534Z,1478855119.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T09:05:19.535Z,1478855119.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:19.904Z,1478855119.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:19.965Z,1478855119.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T09:05:19.966Z,1478855119.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:20.297Z,1478855120.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:20.319Z,1478855120.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T09:05:20.336Z,1478855120.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:20.693Z,1478855120.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:20.750Z,1478855120.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T09:05:20.751Z,1478855120.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:21.104Z,1478855121.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:21.120Z,1478855121.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T09:05:21.122Z,1478855121.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:21.500Z,1478855121.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:21.517Z,1478855121.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T09:05:21.518Z,1478855121.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:21.889Z,1478855121.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:21.965Z,1478855121.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T09:05:21.966Z,1478855121.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:22.301Z,1478855122.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:22.332Z,1478855122.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T09:05:22.333Z,1478855122.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:22.693Z,1478855122.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:22.741Z,1478855122.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T09:05:22.742Z,1478855122.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:23.089Z,1478855123.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:23.138Z,1478855123.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T09:05:23.139Z,1478855123.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:23.489Z,1478855123.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:23.525Z,1478855123.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T09:05:23.526Z,1478855123.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:23.893Z,1478855123.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:23.937Z,1478855123.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T09:05:23.938Z,1478855123.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:24.298Z,1478855124.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:24.327Z,1478855124.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T09:05:24.328Z,1478855124.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:24.700Z,1478855124.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:24.717Z,1478855124.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T09:05:24.718Z,1478855124.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:25.101Z,1478855125.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:25.118Z,1478855125.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T09:05:25.119Z,1478855125.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:25.497Z,1478855125.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:25.522Z,1478855125.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T09:05:25.523Z,1478855125.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:25.890Z,1478855125.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:25.953Z,1478855125.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T09:05:25.954Z,1478855125.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:26.297Z,1478855126.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:26.334Z,1478855126.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T09:05:26.339Z,1478855126.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:26.689Z,1478855126.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:26.717Z,1478855126.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T09:05:26.718Z,1478855126.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:27.094Z,1478855127.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:27.133Z,1478855127.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T09:05:27.134Z,1478855127.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:27.489Z,1478855127.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:27.529Z,1478855127.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T09:05:27.530Z,1478855127.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:27.897Z,1478855127.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:27.931Z,1478855127.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T09:05:27.932Z,1478855127.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:28.293Z,1478855128.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:28.315Z,1478855128.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T09:05:28.332Z,1478855128.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:28.697Z,1478855128.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:28.719Z,1478855128.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T09:05:28.736Z,1478855128.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:29.094Z,1478855129.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:29.122Z,1478855129.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T09:05:29.147Z,1478855129.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:29.493Z,1478855129.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:29.526Z,1478855129.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T09:05:29.527Z,1478855129.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:29.902Z,1478855129.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:29.945Z,1478855129.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T09:05:29.946Z,1478855129.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:30.295Z,1478855130.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:30.323Z,1478855130.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T09:05:30.324Z,1478855130.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:30.689Z,1478855130.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:30.730Z,1478855130.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T09:05:30.736Z,1478855130.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:31.089Z,1478855131.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:31.141Z,1478855131.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T09:05:31.142Z,1478855131.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:31.489Z,1478855131.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:31.505Z,1478855131.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T09:05:31.506Z,1478855131.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:31.892Z,1478855131.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:31.932Z,1478855131.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T09:05:31.933Z,1478855131.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:32.292Z,1478855132.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:32.325Z,1478855132.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T09:05:32.326Z,1478855132.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:32.674Z,1478855132.674 [NAL9602](INFO): SBD MO Status=2, MOMSN=341, MT Status=2, MTMSN=0
2016-11-11T09:05:32.674Z,1478855132.674 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T09:05:32.693Z,1478855132.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:32.747Z,1478855132.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T09:05:32.748Z,1478855132.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:33.107Z,1478855133.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:33.125Z,1478855133.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T09:05:33.126Z,1478855133.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:33.501Z,1478855133.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:33.521Z,1478855133.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T09:05:33.522Z,1478855133.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:33.906Z,1478855133.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:33.922Z,1478855133.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T09:05:33.924Z,1478855133.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:34.289Z,1478855134.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:34.325Z,1478855134.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T09:05:34.326Z,1478855134.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:34.693Z,1478855134.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:34.722Z,1478855134.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2016-11-11T09:05:34.728Z,1478855134.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:35.090Z,1478855135.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:35.161Z,1478855135.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:35.489Z,1478855135.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:35.509Z,1478855135.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:35.897Z,1478855135.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:35.948Z,1478855135.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:36.297Z,1478855136.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:36.313Z,1478855136.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:36.695Z,1478855136.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:36.749Z,1478855136.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:37.114Z,1478855137.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:37.167Z,1478855137.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:37.504Z,1478855137.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:37.520Z,1478855137.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:37.893Z,1478855137.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:37.916Z,1478855137.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:38.297Z,1478855138.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:38.320Z,1478855138.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:38.693Z,1478855138.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:38.725Z,1478855138.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:39.089Z,1478855139.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:39.124Z,1478855139.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:39.489Z,1478855139.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:39.525Z,1478855139.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:39.914Z,1478855139.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:39.929Z,1478855139.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:40.300Z,1478855140.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:40.345Z,1478855140.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:40.689Z,1478855140.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:40.725Z,1478855140.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:41.095Z,1478855141.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:41.119Z,1478855141.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:41.493Z,1478855141.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:41.508Z,1478855141.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:41.893Z,1478855141.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:41.915Z,1478855141.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:42.297Z,1478855142.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:42.323Z,1478855142.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:42.693Z,1478855142.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:42.709Z,1478855142.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:43.096Z,1478855143.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:43.153Z,1478855143.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:43.489Z,1478855143.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:43.529Z,1478855143.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:43.889Z,1478855143.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:43.925Z,1478855143.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:44.289Z,1478855144.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:44.329Z,1478855144.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:44.689Z,1478855144.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:44.720Z,1478855144.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:45.093Z,1478855145.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:45.109Z,1478855145.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:45.497Z,1478855145.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:45.541Z,1478855145.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:45.897Z,1478855145.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:45.930Z,1478855145.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:46.297Z,1478855146.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:46.369Z,1478855146.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:46.696Z,1478855146.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:46.712Z,1478855146.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:47.097Z,1478855147.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:47.140Z,1478855147.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:47.492Z,1478855147.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:47.537Z,1478855147.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:47.889Z,1478855147.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:47.958Z,1478855147.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:47.988Z,1478855147.987 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T09:00:47.7Z
2016-11-11T09:05:47.988Z,1478855147.988 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T09:05:47.988Z,1478855147.988 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T09:05:48.319Z,1478855148.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:48.342Z,1478855148.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:49.152Z,1478855149.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:49.257Z,1478855149.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:49.349Z,1478855149.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:49.385Z,1478855149.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:52.616Z,1478855152.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:52.680Z,1478855152.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:52.701Z,1478855152.701 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T09:05:52.711Z,1478855152.711 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0100.lzma
2016-11-11T09:05:52.807Z,1478855152.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:52.838Z,1478855152.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:53.135Z,1478855153.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:53.178Z,1478855153.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:53.515Z,1478855153.515 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0100.lzma.bak
2016-11-11T09:05:53.515Z,1478855153.515 [DataOverHttps](INFO): SBD MOMSN=4555258
2016-11-11T09:05:53.538Z,1478855153.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:53.590Z,1478855153.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:54.790Z,1478855154.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:54.824Z,1478855154.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:54.922Z,1478855154.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:54.967Z,1478855154.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:58.215Z,1478855158.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:58.230Z,1478855158.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:58.334Z,1478855158.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:58.364Z,1478855158.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:58.689Z,1478855158.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:58.737Z,1478855158.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:59.089Z,1478855159.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:59.103Z,1478855159.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:59.488Z,1478855159.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:59.504Z,1478855159.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:05:59.892Z,1478855159.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:05:59.908Z,1478855159.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:03.244Z,1478855163.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:03.259Z,1478855163.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:03.315Z,1478855163.316 [DataOverHttps](INFO): Sending 331 bytes from file Logs/20161111T044527/Express0101.lzma
2016-11-11T09:06:03.370Z,1478855163.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:03.398Z,1478855163.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:03.741Z,1478855163.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:03.772Z,1478855163.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:04.113Z,1478855164.113 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0101.lzma.bak
2016-11-11T09:06:04.113Z,1478855164.113 [DataOverHttps](INFO): SBD MOMSN=4555260
2016-11-11T09:06:04.152Z,1478855164.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:04.177Z,1478855164.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:05.482Z,1478855165.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:05.573Z,1478855165.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:05.590Z,1478855165.590 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T09:06:05.590Z,1478855165.591 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T09:06:05.591Z,1478855165.591 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T09:06:05.663Z,1478855165.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:05.687Z,1478855165.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:08.911Z,1478855168.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:08.963Z,1478855168.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:09.072Z,1478855169.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:09.113Z,1478855169.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:09.421Z,1478855169.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:09.473Z,1478855169.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:09.821Z,1478855169.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:09.868Z,1478855169.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:10.217Z,1478855170.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:10.237Z,1478855170.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:10.620Z,1478855170.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:10.641Z,1478855170.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:11.022Z,1478855171.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:11.036Z,1478855171.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:11.416Z,1478855171.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:11.448Z,1478855171.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:11.821Z,1478855171.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:11.841Z,1478855171.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:12.213Z,1478855172.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:12.248Z,1478855172.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:12.613Z,1478855172.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:12.645Z,1478855172.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:13.035Z,1478855173.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:13.053Z,1478855173.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:13.413Z,1478855173.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:13.445Z,1478855173.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:13.813Z,1478855173.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:13.845Z,1478855173.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:14.213Z,1478855174.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:14.249Z,1478855174.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:14.613Z,1478855174.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:14.646Z,1478855174.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:15.013Z,1478855175.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:15.045Z,1478855175.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:15.421Z,1478855175.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:15.455Z,1478855175.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:15.813Z,1478855175.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:15.849Z,1478855175.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:16.218Z,1478855176.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:16.234Z,1478855176.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:16.620Z,1478855176.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:16.635Z,1478855176.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:17.021Z,1478855177.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:17.035Z,1478855177.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:17.425Z,1478855177.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:17.445Z,1478855177.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:17.820Z,1478855177.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:17.835Z,1478855177.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:18.217Z,1478855178.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:18.241Z,1478855178.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:18.613Z,1478855178.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:18.645Z,1478855178.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:19.013Z,1478855179.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:19.049Z,1478855179.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:19.414Z,1478855179.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:19.450Z,1478855179.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:19.817Z,1478855179.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:19.841Z,1478855179.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:20.221Z,1478855180.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:20.241Z,1478855180.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:20.625Z,1478855180.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:20.640Z,1478855180.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:21.016Z,1478855181.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:21.048Z,1478855181.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:21.413Z,1478855181.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:21.456Z,1478855181.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:21.813Z,1478855181.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:21.858Z,1478855181.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:22.216Z,1478855182.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:22.273Z,1478855182.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:22.613Z,1478855182.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:22.646Z,1478855182.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:23.018Z,1478855183.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:23.044Z,1478855183.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:23.413Z,1478855183.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:23.483Z,1478855183.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:23.813Z,1478855183.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:23.845Z,1478855183.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:24.218Z,1478855184.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:24.270Z,1478855184.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:24.613Z,1478855184.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:24.665Z,1478855184.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:25.013Z,1478855185.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:25.057Z,1478855185.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:25.414Z,1478855185.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:25.429Z,1478855185.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:25.813Z,1478855185.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:25.833Z,1478855185.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:26.218Z,1478855186.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:26.246Z,1478855186.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:26.624Z,1478855186.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:26.640Z,1478855186.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:26.998Z,1478855186.998 [NAL9602](INFO): SBD MO Status=2, MOMSN=341, MT Status=2, MTMSN=0
2016-11-11T09:06:26.998Z,1478855186.998 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T09:06:27.018Z,1478855187.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:27.041Z,1478855187.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:27.397Z,1478855187.397 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T09:06:27.413Z,1478855187.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:27.457Z,1478855187.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:27.818Z,1478855187.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:27.844Z,1478855187.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:28.213Z,1478855188.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:28.245Z,1478855188.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:28.613Z,1478855188.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:28.644Z,1478855188.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:29.017Z,1478855189.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:29.043Z,1478855189.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:29.413Z,1478855189.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:29.436Z,1478855189.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:29.813Z,1478855189.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:29.849Z,1478855189.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:30.213Z,1478855190.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:30.249Z,1478855190.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:30.613Z,1478855190.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:30.636Z,1478855190.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:31.013Z,1478855191.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:31.056Z,1478855191.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:31.413Z,1478855191.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:31.454Z,1478855191.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:31.816Z,1478855191.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:31.832Z,1478855191.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:32.216Z,1478855192.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:32.237Z,1478855192.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:32.625Z,1478855192.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:32.656Z,1478855192.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:32.996Z,1478855192.996 [NAL9602](INFO): Powering down
2016-11-11T09:06:33.018Z,1478855193.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:33.045Z,1478855193.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:33.424Z,1478855193.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:33.445Z,1478855193.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:33.824Z,1478855193.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:33.840Z,1478855193.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:34.220Z,1478855194.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:34.241Z,1478855194.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:34.613Z,1478855194.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:34.638Z,1478855194.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:35.017Z,1478855195.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:35.049Z,1478855195.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:35.439Z,1478855195.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:35.498Z,1478855195.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:35.813Z,1478855195.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:35.844Z,1478855195.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:36.221Z,1478855196.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:36.241Z,1478855196.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:36.613Z,1478855196.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:36.653Z,1478855196.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:37.013Z,1478855197.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:37.053Z,1478855197.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:37.417Z,1478855197.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:37.437Z,1478855197.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:37.813Z,1478855197.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:37.861Z,1478855197.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:38.217Z,1478855198.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:38.231Z,1478855198.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:38.617Z,1478855198.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:38.668Z,1478855198.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:39.017Z,1478855199.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:39.065Z,1478855199.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:39.417Z,1478855199.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:39.487Z,1478855199.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:39.813Z,1478855199.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:39.830Z,1478855199.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:40.213Z,1478855200.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:40.229Z,1478855200.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:40.614Z,1478855200.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:40.633Z,1478855200.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:41.018Z,1478855201.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:41.033Z,1478855201.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:41.413Z,1478855201.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:41.429Z,1478855201.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:41.818Z,1478855201.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:41.832Z,1478855201.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:42.214Z,1478855202.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:42.230Z,1478855202.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:42.617Z,1478855202.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:42.635Z,1478855202.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:43.017Z,1478855203.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:43.069Z,1478855203.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:43.410Z,1478855203.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:43.424Z,1478855203.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:43.817Z,1478855203.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:43.833Z,1478855203.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:44.213Z,1478855204.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:44.238Z,1478855204.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:44.610Z,1478855204.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:44.624Z,1478855204.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:45.013Z,1478855205.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:45.028Z,1478855205.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:45.417Z,1478855205.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:45.431Z,1478855205.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:45.813Z,1478855205.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:45.830Z,1478855205.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:46.217Z,1478855206.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:46.237Z,1478855206.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:46.613Z,1478855206.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:46.633Z,1478855206.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:47.017Z,1478855207.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:47.040Z,1478855207.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:47.413Z,1478855207.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:47.432Z,1478855207.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:47.817Z,1478855207.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:47.837Z,1478855207.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:48.216Z,1478855208.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:48.268Z,1478855208.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:48.621Z,1478855208.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:48.640Z,1478855208.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:49.013Z,1478855209.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:49.037Z,1478855209.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:49.413Z,1478855209.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:49.433Z,1478855209.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:49.817Z,1478855209.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:49.832Z,1478855209.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:50.213Z,1478855210.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:50.237Z,1478855210.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:50.617Z,1478855210.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:50.641Z,1478855210.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:51.030Z,1478855211.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:51.093Z,1478855211.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:51.417Z,1478855211.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:51.431Z,1478855211.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:51.817Z,1478855211.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:51.836Z,1478855211.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:52.213Z,1478855212.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:52.265Z,1478855212.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:52.617Z,1478855212.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:52.631Z,1478855212.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:53.013Z,1478855213.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:53.061Z,1478855213.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:53.417Z,1478855213.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:53.465Z,1478855213.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:53.813Z,1478855213.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:53.831Z,1478855213.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:54.217Z,1478855214.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:54.252Z,1478855214.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:54.613Z,1478855214.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:54.634Z,1478855214.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:55.017Z,1478855215.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:55.035Z,1478855215.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:55.449Z,1478855215.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:55.493Z,1478855215.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:55.813Z,1478855215.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:55.856Z,1478855215.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:56.213Z,1478855216.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:56.242Z,1478855216.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:56.613Z,1478855216.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:56.645Z,1478855216.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:57.015Z,1478855217.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:57.034Z,1478855217.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:57.413Z,1478855217.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:57.454Z,1478855217.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:57.813Z,1478855217.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:57.841Z,1478855217.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:58.213Z,1478855218.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:58.240Z,1478855218.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:58.612Z,1478855218.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:58.641Z,1478855218.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:59.013Z,1478855219.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:59.045Z,1478855219.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:59.413Z,1478855219.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:59.439Z,1478855219.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:06:59.813Z,1478855219.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:06:59.837Z,1478855219.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:00.215Z,1478855220.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:00.230Z,1478855220.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:00.616Z,1478855220.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:00.654Z,1478855220.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:01.018Z,1478855221.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:01.037Z,1478855221.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:01.422Z,1478855221.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:01.437Z,1478855221.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:01.824Z,1478855221.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:01.847Z,1478855221.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:02.224Z,1478855222.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:02.250Z,1478855222.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:02.626Z,1478855222.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:02.634Z,1478855222.634 [PNI_TCM](ERROR): CRC does not match. Expected:0x46551 got:0x536
2016-11-11T09:07:02.674Z,1478855222.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:03.023Z,1478855223.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:03.039Z,1478855223.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:03.415Z,1478855223.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:03.451Z,1478855223.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:03.820Z,1478855223.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:03.846Z,1478855223.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:04.213Z,1478855224.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:04.229Z,1478855224.229 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2016-11-11T09:07:04.250Z,1478855224.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:04.615Z,1478855224.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:04.649Z,1478855224.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:05.015Z,1478855225.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:05.040Z,1478855225.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:05.413Z,1478855225.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:05.493Z,1478855225.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:05.823Z,1478855225.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:05.839Z,1478855225.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:06.224Z,1478855226.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:06.271Z,1478855226.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:09.663Z,1478855229.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:09.679Z,1478855229.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:09.792Z,1478855229.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:09.849Z,1478855229.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:10.149Z,1478855230.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:10.188Z,1478855230.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:10.549Z,1478855230.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:10.602Z,1478855230.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:10.949Z,1478855230.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:10.965Z,1478855230.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:11.353Z,1478855231.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:11.369Z,1478855231.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:11.754Z,1478855231.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:11.768Z,1478855231.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:12.159Z,1478855232.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:12.174Z,1478855232.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:12.556Z,1478855232.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:12.571Z,1478855232.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:12.953Z,1478855232.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:12.977Z,1478855232.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:13.353Z,1478855233.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:13.384Z,1478855233.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:13.749Z,1478855233.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:13.785Z,1478855233.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:14.149Z,1478855234.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:14.182Z,1478855234.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:14.549Z,1478855234.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:14.581Z,1478855234.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:14.949Z,1478855234.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:14.989Z,1478855234.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:15.349Z,1478855235.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:15.393Z,1478855235.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:15.755Z,1478855235.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:15.770Z,1478855235.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:16.154Z,1478855236.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:16.169Z,1478855236.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:16.556Z,1478855236.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:16.571Z,1478855236.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:16.955Z,1478855236.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:16.970Z,1478855236.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:17.356Z,1478855237.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:17.385Z,1478855237.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:17.756Z,1478855237.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:17.779Z,1478855237.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:18.156Z,1478855238.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:18.172Z,1478855238.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:18.549Z,1478855238.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:18.583Z,1478855238.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:18.949Z,1478855238.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:18.981Z,1478855238.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:19.353Z,1478855239.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:19.393Z,1478855239.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:19.749Z,1478855239.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:19.781Z,1478855239.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:20.149Z,1478855240.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:20.185Z,1478855240.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:20.549Z,1478855240.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:20.589Z,1478855240.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:20.953Z,1478855240.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:20.983Z,1478855240.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:21.357Z,1478855241.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:21.389Z,1478855241.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:21.749Z,1478855241.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:21.781Z,1478855241.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:22.149Z,1478855242.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:22.186Z,1478855242.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:22.549Z,1478855242.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:22.625Z,1478855242.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:22.955Z,1478855242.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:22.998Z,1478855242.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:23.349Z,1478855243.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:23.402Z,1478855243.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:23.749Z,1478855243.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:23.769Z,1478855243.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:24.152Z,1478855244.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:24.203Z,1478855244.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:24.554Z,1478855244.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:24.598Z,1478855244.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:24.954Z,1478855244.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:24.969Z,1478855244.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:25.352Z,1478855245.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:25.368Z,1478855245.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:25.755Z,1478855245.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:25.778Z,1478855245.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:26.156Z,1478855246.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:26.171Z,1478855246.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:26.556Z,1478855246.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:26.572Z,1478855246.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:26.956Z,1478855246.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:26.975Z,1478855246.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:27.356Z,1478855247.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:27.377Z,1478855247.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:27.749Z,1478855247.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:27.781Z,1478855247.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:28.149Z,1478855248.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:28.177Z,1478855248.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:28.549Z,1478855248.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:28.585Z,1478855248.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:28.962Z,1478855248.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:28.988Z,1478855248.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:29.349Z,1478855249.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:29.381Z,1478855249.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:29.749Z,1478855249.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:29.785Z,1478855249.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:30.149Z,1478855250.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:30.182Z,1478855250.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:30.549Z,1478855250.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:30.585Z,1478855250.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:30.949Z,1478855250.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:30.985Z,1478855250.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:31.349Z,1478855251.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:31.372Z,1478855251.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:31.749Z,1478855251.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:31.791Z,1478855251.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:32.149Z,1478855252.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:32.189Z,1478855252.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:32.549Z,1478855252.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:32.591Z,1478855252.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:32.949Z,1478855252.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:32.969Z,1478855252.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:33.353Z,1478855253.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:33.400Z,1478855253.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:33.749Z,1478855253.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:33.768Z,1478855253.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:34.155Z,1478855254.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:34.170Z,1478855254.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:34.557Z,1478855254.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:34.579Z,1478855254.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:34.964Z,1478855254.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:34.981Z,1478855254.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:35.363Z,1478855255.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:35.381Z,1478855255.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:35.752Z,1478855255.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:35.784Z,1478855255.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:36.149Z,1478855256.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:36.166Z,1478855256.166 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T09:07:36.166Z,1478855256.166 [BPC1] Data Fault, FailCount= 1
2016-11-11T09:07:36.166Z,1478855256.166 [BPC1](ERROR): Data Fault
2016-11-11T09:07:36.181Z,1478855256.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:36.226Z,1478855256.226 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:07:36.549Z,1478855256.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:36.575Z,1478855256.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:36.950Z,1478855256.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:36.975Z,1478855256.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:37.349Z,1478855257.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:37.396Z,1478855257.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:37.416Z,1478855257.416 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:07:37.416Z,1478855257.416 [BPC1] No Fault, FailCount= 1
2016-11-11T09:07:37.749Z,1478855257.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:37.830Z,1478855257.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:38.153Z,1478855258.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:38.188Z,1478855258.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:38.554Z,1478855258.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:38.599Z,1478855258.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:38.949Z,1478855258.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:38.986Z,1478855258.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:39.353Z,1478855259.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:39.372Z,1478855259.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:39.758Z,1478855259.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:39.775Z,1478855259.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:40.159Z,1478855260.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:40.181Z,1478855260.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:40.552Z,1478855260.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:40.588Z,1478855260.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:40.957Z,1478855260.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:40.976Z,1478855260.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:41.360Z,1478855261.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:41.381Z,1478855261.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:41.751Z,1478855261.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:41.776Z,1478855261.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:42.149Z,1478855262.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:42.193Z,1478855262.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:42.549Z,1478855262.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:42.584Z,1478855262.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:42.950Z,1478855262.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:42.978Z,1478855262.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:43.351Z,1478855263.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:43.379Z,1478855263.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:43.749Z,1478855263.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:43.788Z,1478855263.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:44.149Z,1478855264.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:44.181Z,1478855264.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:44.551Z,1478855264.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:44.587Z,1478855264.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:44.951Z,1478855264.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:44.997Z,1478855264.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:45.349Z,1478855265.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:45.389Z,1478855265.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:45.754Z,1478855265.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:45.784Z,1478855265.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:46.151Z,1478855266.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:46.166Z,1478855266.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:46.556Z,1478855266.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:46.572Z,1478855266.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:46.957Z,1478855266.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:46.998Z,1478855266.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:47.360Z,1478855267.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:47.366Z,1478855267.366 [PNI_TCM](ERROR): CRC does not match. Expected:0x63947 got:0x25584
2016-11-11T09:07:47.390Z,1478855267.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:47.755Z,1478855267.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:47.782Z,1478855267.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:48.158Z,1478855268.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:48.174Z,1478855268.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:48.552Z,1478855268.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:48.585Z,1478855268.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:48.951Z,1478855268.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:48.970Z,1478855268.970 [PNI_TCM](ERROR): CRC does not match. Expected:0x28036 got:0x49655
2016-11-11T09:07:48.993Z,1478855268.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:49.360Z,1478855269.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:49.401Z,1478855269.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:49.752Z,1478855269.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:49.793Z,1478855269.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:50.151Z,1478855270.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:50.210Z,1478855270.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:50.553Z,1478855270.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:50.665Z,1478855270.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:50.955Z,1478855270.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:51.005Z,1478855271.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:51.353Z,1478855271.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:51.409Z,1478855271.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:51.751Z,1478855271.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:51.781Z,1478855271.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:52.162Z,1478855272.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:52.233Z,1478855272.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:52.561Z,1478855272.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:52.618Z,1478855272.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:52.959Z,1478855272.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:52.990Z,1478855272.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:53.362Z,1478855273.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:53.431Z,1478855273.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:53.759Z,1478855273.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:53.790Z,1478855273.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:54.153Z,1478855274.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:54.188Z,1478855274.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:54.551Z,1478855274.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:54.606Z,1478855274.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:54.956Z,1478855274.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:54.986Z,1478855274.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:55.360Z,1478855275.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:55.384Z,1478855275.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:55.752Z,1478855275.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:55.805Z,1478855275.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:56.150Z,1478855276.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:56.197Z,1478855276.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:56.553Z,1478855276.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:56.573Z,1478855276.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:56.974Z,1478855276.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:56.994Z,1478855276.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:57.357Z,1478855277.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:57.371Z,1478855277.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:57.801Z,1478855277.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:57.876Z,1478855277.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:58.178Z,1478855278.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:58.193Z,1478855278.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:58.551Z,1478855278.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:58.575Z,1478855278.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:58.949Z,1478855278.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:58.974Z,1478855278.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:59.351Z,1478855279.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:59.401Z,1478855279.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:07:59.751Z,1478855279.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:07:59.782Z,1478855279.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:00.150Z,1478855280.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:00.202Z,1478855280.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:00.549Z,1478855280.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:00.590Z,1478855280.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:00.957Z,1478855280.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:00.972Z,1478855280.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:01.361Z,1478855281.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:01.376Z,1478855281.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:01.759Z,1478855281.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:01.804Z,1478855281.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:02.156Z,1478855282.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:02.171Z,1478855282.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:02.549Z,1478855282.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:02.599Z,1478855282.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:02.955Z,1478855282.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:02.989Z,1478855282.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:03.353Z,1478855283.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:03.373Z,1478855283.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:03.753Z,1478855283.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:03.773Z,1478855283.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:04.149Z,1478855284.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:04.169Z,1478855284.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:04.554Z,1478855284.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:04.610Z,1478855284.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:04.949Z,1478855284.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:04.965Z,1478855284.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:05.353Z,1478855285.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:05.394Z,1478855285.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:05.750Z,1478855285.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:05.812Z,1478855285.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:06.153Z,1478855286.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:06.201Z,1478855286.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:06.553Z,1478855286.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:06.594Z,1478855286.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:09.943Z,1478855289.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:09.958Z,1478855289.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:10.049Z,1478855290.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:10.081Z,1478855290.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:10.417Z,1478855290.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:10.431Z,1478855290.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:10.821Z,1478855290.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:10.841Z,1478855290.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:11.213Z,1478855291.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:11.228Z,1478855291.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:11.609Z,1478855291.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:11.624Z,1478855291.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:12.017Z,1478855292.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:12.037Z,1478855292.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:12.417Z,1478855292.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:12.432Z,1478855292.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:12.853Z,1478855292.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:12.871Z,1478855292.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:13.213Z,1478855293.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:13.233Z,1478855293.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:13.625Z,1478855293.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:13.645Z,1478855293.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:14.021Z,1478855294.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:14.036Z,1478855294.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:14.433Z,1478855294.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:14.487Z,1478855294.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:14.817Z,1478855294.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:14.837Z,1478855294.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:15.213Z,1478855295.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:15.233Z,1478855295.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:15.239Z,1478855295.239 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:15.239Z,1478855295.239 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 67
2016-11-11T09:08:15.240Z,1478855295.240 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:08:15.242Z,1478855295.241 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:15.242Z,1478855295.242 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 67
2016-11-11T09:08:15.242Z,1478855295.242 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:08:15.256Z,1478855295.256 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:08:15.256Z,1478855295.256 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:08:15.617Z,1478855295.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:15.637Z,1478855295.637 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:15.637Z,1478855295.637 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2016-11-11T09:08:15.637Z,1478855295.638 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:08:15.657Z,1478855295.657 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:08:15.657Z,1478855295.657 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:08:15.657Z,1478855295.657 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 67
2016-11-11T09:08:15.658Z,1478855295.658 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:08:15.658Z,1478855295.658 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 67
2016-11-11T09:08:16.010Z,1478855296.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:16.029Z,1478855296.029 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:08:16.029Z,1478855296.029 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:08:16.029Z,1478855296.029 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:08:16.030Z,1478855296.030 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:08:16.030Z,1478855296.030 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:08:16.031Z,1478855296.030 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:08:16.044Z,1478855296.044 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:08:16.045Z,1478855296.045 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2016-11-11T09:08:16.414Z,1478855296.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:16.432Z,1478855296.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:08:16.432Z,1478855296.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:08:16.433Z,1478855296.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:08:16.814Z,1478855296.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:16.829Z,1478855296.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T09:08:16.830Z,1478855296.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:17.210Z,1478855297.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:17.225Z,1478855297.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T09:08:17.226Z,1478855297.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:17.614Z,1478855297.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:17.628Z,1478855297.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T09:08:17.629Z,1478855297.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:18.009Z,1478855298.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:18.025Z,1478855298.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T09:08:18.026Z,1478855298.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:18.413Z,1478855298.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:18.477Z,1478855298.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T09:08:18.479Z,1478855298.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:18.813Z,1478855298.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:18.828Z,1478855298.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T09:08:18.829Z,1478855298.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:19.209Z,1478855299.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:19.257Z,1478855299.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T09:08:19.257Z,1478855299.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:19.613Z,1478855299.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:19.628Z,1478855299.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T09:08:19.629Z,1478855299.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:20.009Z,1478855300.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:20.056Z,1478855300.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T09:08:20.057Z,1478855300.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:20.413Z,1478855300.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:20.461Z,1478855300.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T09:08:20.461Z,1478855300.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:20.813Z,1478855300.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:20.828Z,1478855300.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T09:08:20.829Z,1478855300.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:21.213Z,1478855301.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:21.227Z,1478855301.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T09:08:21.228Z,1478855301.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:21.613Z,1478855301.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:21.627Z,1478855301.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T09:08:21.628Z,1478855301.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:22.013Z,1478855302.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:22.028Z,1478855302.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T09:08:22.029Z,1478855302.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:22.421Z,1478855302.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:22.437Z,1478855302.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T09:08:22.438Z,1478855302.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:22.813Z,1478855302.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:22.827Z,1478855302.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T09:08:22.828Z,1478855302.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:23.213Z,1478855303.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:23.228Z,1478855303.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T09:08:23.229Z,1478855303.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:23.609Z,1478855303.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:23.628Z,1478855303.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T09:08:23.629Z,1478855303.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:24.013Z,1478855304.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:24.027Z,1478855304.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T09:08:24.028Z,1478855304.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:24.413Z,1478855304.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:24.428Z,1478855304.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T09:08:24.429Z,1478855304.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:24.813Z,1478855304.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:24.827Z,1478855304.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T09:08:24.828Z,1478855304.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:25.214Z,1478855305.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:25.275Z,1478855305.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T09:08:25.276Z,1478855305.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:25.638Z,1478855305.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:25.660Z,1478855305.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T09:08:25.662Z,1478855305.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:26.016Z,1478855306.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:26.046Z,1478855306.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T09:08:26.047Z,1478855306.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:26.409Z,1478855306.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:26.424Z,1478855306.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T09:08:26.425Z,1478855306.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:26.817Z,1478855306.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:26.832Z,1478855306.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T09:08:26.833Z,1478855306.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:27.214Z,1478855307.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:27.244Z,1478855307.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T09:08:27.245Z,1478855307.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:27.618Z,1478855307.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:27.657Z,1478855307.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T09:08:27.658Z,1478855307.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:28.010Z,1478855308.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:28.041Z,1478855308.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T09:08:28.042Z,1478855308.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:28.411Z,1478855308.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:28.445Z,1478855308.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T09:08:28.446Z,1478855308.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:28.818Z,1478855308.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:28.848Z,1478855308.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T09:08:28.850Z,1478855308.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:29.218Z,1478855309.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:29.233Z,1478855309.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T09:08:29.234Z,1478855309.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:29.644Z,1478855309.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:29.692Z,1478855309.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2016-11-11T09:08:29.693Z,1478855309.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:30.011Z,1478855310.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:30.037Z,1478855310.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T09:08:30.038Z,1478855310.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:30.419Z,1478855310.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:30.461Z,1478855310.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T09:08:30.462Z,1478855310.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:30.822Z,1478855310.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:30.870Z,1478855310.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T09:08:30.872Z,1478855310.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:31.242Z,1478855311.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:31.266Z,1478855311.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T09:08:31.267Z,1478855311.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:31.618Z,1478855311.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:31.661Z,1478855311.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T09:08:31.662Z,1478855311.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:32.010Z,1478855312.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:32.041Z,1478855312.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T09:08:32.042Z,1478855312.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:32.414Z,1478855312.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:32.490Z,1478855312.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2016-11-11T09:08:32.491Z,1478855312.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:32.812Z,1478855312.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:32.845Z,1478855312.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T09:08:32.846Z,1478855312.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:33.214Z,1478855313.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:33.249Z,1478855313.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T09:08:33.250Z,1478855313.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:33.610Z,1478855313.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:33.653Z,1478855313.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T09:08:33.654Z,1478855313.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:34.010Z,1478855314.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:34.037Z,1478855314.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T09:08:34.038Z,1478855314.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:34.410Z,1478855314.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:34.450Z,1478855314.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T09:08:34.451Z,1478855314.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:34.810Z,1478855314.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:34.840Z,1478855314.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T09:08:34.841Z,1478855314.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:35.210Z,1478855315.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:35.293Z,1478855315.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2016-11-11T09:08:35.294Z,1478855315.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:35.610Z,1478855315.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:35.645Z,1478855315.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:36.010Z,1478855316.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:36.045Z,1478855316.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:36.421Z,1478855316.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:36.450Z,1478855316.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:36.816Z,1478855316.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:36.845Z,1478855316.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:37.210Z,1478855317.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:37.245Z,1478855317.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:37.610Z,1478855317.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:37.664Z,1478855317.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:38.010Z,1478855318.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:38.045Z,1478855318.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:38.410Z,1478855318.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:38.445Z,1478855318.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:38.811Z,1478855318.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:38.826Z,1478855318.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:39.210Z,1478855319.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:39.241Z,1478855319.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:39.610Z,1478855319.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:39.625Z,1478855319.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:40.011Z,1478855320.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:40.054Z,1478855320.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:40.410Z,1478855320.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:40.445Z,1478855320.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:40.810Z,1478855320.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:40.849Z,1478855320.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:41.218Z,1478855321.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:41.234Z,1478855321.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:41.609Z,1478855321.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:41.649Z,1478855321.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:42.015Z,1478855322.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:42.065Z,1478855322.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:42.452Z,1478855322.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:42.481Z,1478855322.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:42.817Z,1478855322.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:42.849Z,1478855322.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:43.216Z,1478855323.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:43.246Z,1478855323.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:43.620Z,1478855323.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:43.637Z,1478855323.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:44.020Z,1478855324.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:44.045Z,1478855324.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:44.423Z,1478855324.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:44.448Z,1478855324.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:44.809Z,1478855324.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:44.845Z,1478855324.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:45.209Z,1478855325.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:45.241Z,1478855325.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:45.617Z,1478855325.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:45.646Z,1478855325.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:46.021Z,1478855326.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:46.055Z,1478855326.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:46.447Z,1478855326.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:46.477Z,1478855326.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:46.813Z,1478855326.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:46.828Z,1478855326.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:47.225Z,1478855327.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:47.293Z,1478855327.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:47.629Z,1478855327.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:47.644Z,1478855327.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:48.050Z,1478855328.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:48.111Z,1478855328.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:48.424Z,1478855328.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:48.470Z,1478855328.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:48.816Z,1478855328.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:48.871Z,1478855328.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:49.220Z,1478855329.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:49.270Z,1478855329.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:49.612Z,1478855329.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:49.645Z,1478855329.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:50.020Z,1478855330.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:50.036Z,1478855330.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:50.409Z,1478855330.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:50.446Z,1478855330.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:50.809Z,1478855330.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:50.844Z,1478855330.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:51.209Z,1478855331.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:51.243Z,1478855331.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:51.609Z,1478855331.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:51.635Z,1478855331.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:52.009Z,1478855332.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:52.048Z,1478855332.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:52.409Z,1478855332.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:52.443Z,1478855332.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:52.809Z,1478855332.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:52.834Z,1478855332.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:53.209Z,1478855333.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:53.238Z,1478855333.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:53.609Z,1478855333.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:53.646Z,1478855333.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:54.009Z,1478855334.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:54.045Z,1478855334.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:54.409Z,1478855334.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:54.447Z,1478855334.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:54.809Z,1478855334.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:54.853Z,1478855334.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:55.209Z,1478855335.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:55.246Z,1478855335.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:55.609Z,1478855335.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:55.645Z,1478855335.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:56.009Z,1478855336.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:56.050Z,1478855336.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:56.410Z,1478855336.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:56.451Z,1478855336.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:56.810Z,1478855336.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:56.845Z,1478855336.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:57.209Z,1478855337.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:57.246Z,1478855337.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:57.610Z,1478855337.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:57.629Z,1478855337.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:58.014Z,1478855338.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:58.033Z,1478855338.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:58.413Z,1478855338.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:58.433Z,1478855338.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:58.817Z,1478855338.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:58.863Z,1478855338.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:59.254Z,1478855339.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:59.277Z,1478855339.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:08:59.636Z,1478855339.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:08:59.667Z,1478855339.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:00.018Z,1478855340.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:00.034Z,1478855340.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:00.417Z,1478855340.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:00.450Z,1478855340.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:00.821Z,1478855340.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:00.840Z,1478855340.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:01.226Z,1478855341.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:01.309Z,1478855341.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:01.610Z,1478855341.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:01.636Z,1478855341.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:02.009Z,1478855342.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:02.053Z,1478855342.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:02.417Z,1478855342.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:02.462Z,1478855342.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:02.818Z,1478855342.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:02.846Z,1478855342.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:03.257Z,1478855343.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:03.314Z,1478855343.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:03.609Z,1478855343.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:03.653Z,1478855343.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:04.017Z,1478855344.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:04.061Z,1478855344.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:04.423Z,1478855344.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:04.449Z,1478855344.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:04.859Z,1478855344.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:04.895Z,1478855344.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:05.217Z,1478855345.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:05.255Z,1478855345.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:05.609Z,1478855345.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:05.657Z,1478855345.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:06.014Z,1478855346.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:06.056Z,1478855346.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:06.412Z,1478855346.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:06.427Z,1478855346.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:06.817Z,1478855346.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:06.859Z,1478855346.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:10.056Z,1478855350.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:10.071Z,1478855350.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:10.174Z,1478855350.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:10.202Z,1478855350.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:10.569Z,1478855350.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:10.589Z,1478855350.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:10.974Z,1478855350.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:10.993Z,1478855350.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:11.373Z,1478855351.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:11.388Z,1478855351.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:11.771Z,1478855351.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:11.791Z,1478855351.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:12.165Z,1478855352.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:12.197Z,1478855352.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:12.565Z,1478855352.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:12.580Z,1478855352.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:12.965Z,1478855352.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:12.985Z,1478855352.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:13.368Z,1478855353.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:13.383Z,1478855353.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:13.773Z,1478855353.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:13.788Z,1478855353.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:14.172Z,1478855354.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:14.188Z,1478855354.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:14.576Z,1478855354.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:14.590Z,1478855354.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:14.973Z,1478855354.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:14.993Z,1478855354.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:15.376Z,1478855355.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:15.391Z,1478855355.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:15.765Z,1478855355.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:15.818Z,1478855355.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:16.165Z,1478855356.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:16.213Z,1478855356.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:16.570Z,1478855356.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:16.585Z,1478855356.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:16.968Z,1478855356.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:17.018Z,1478855357.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:17.370Z,1478855357.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:17.385Z,1478855357.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:17.772Z,1478855357.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:17.822Z,1478855357.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:18.168Z,1478855358.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:18.222Z,1478855358.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:18.568Z,1478855358.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:18.584Z,1478855358.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:18.972Z,1478855358.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:19.001Z,1478855359.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:19.369Z,1478855359.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:19.401Z,1478855359.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:19.765Z,1478855359.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:19.802Z,1478855359.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:20.169Z,1478855360.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:20.200Z,1478855360.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:20.565Z,1478855360.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:20.592Z,1478855360.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:20.965Z,1478855360.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:21.001Z,1478855361.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:21.370Z,1478855361.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:21.401Z,1478855361.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:21.763Z,1478855361.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:21.777Z,1478855361.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:22.165Z,1478855362.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:22.185Z,1478855362.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:22.570Z,1478855362.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:22.585Z,1478855362.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:22.972Z,1478855362.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:22.987Z,1478855362.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:23.371Z,1478855363.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:23.386Z,1478855363.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:23.772Z,1478855363.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:23.793Z,1478855363.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:24.172Z,1478855364.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:24.193Z,1478855364.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:24.572Z,1478855364.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:24.587Z,1478855364.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:24.966Z,1478855364.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:24.991Z,1478855364.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:25.365Z,1478855365.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:25.397Z,1478855365.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:25.765Z,1478855365.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:25.805Z,1478855365.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:26.165Z,1478855366.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:26.185Z,1478855366.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:26.565Z,1478855366.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:26.585Z,1478855366.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:26.965Z,1478855366.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:26.980Z,1478855366.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:27.369Z,1478855367.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:27.384Z,1478855367.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:27.765Z,1478855367.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:27.788Z,1478855367.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:28.172Z,1478855368.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:28.188Z,1478855368.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:28.573Z,1478855368.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:28.587Z,1478855368.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:28.968Z,1478855368.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:28.993Z,1478855368.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:29.376Z,1478855369.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:29.391Z,1478855369.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:29.773Z,1478855369.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:29.794Z,1478855369.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:30.165Z,1478855370.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:30.217Z,1478855370.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:30.565Z,1478855370.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:30.617Z,1478855370.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:30.973Z,1478855370.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:31.012Z,1478855371.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:31.365Z,1478855371.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:31.419Z,1478855371.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:31.768Z,1478855371.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:31.783Z,1478855371.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:32.173Z,1478855372.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:32.223Z,1478855372.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:32.568Z,1478855372.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:32.620Z,1478855372.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:32.969Z,1478855372.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:32.984Z,1478855372.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:33.373Z,1478855373.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:33.393Z,1478855373.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:33.772Z,1478855373.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:33.793Z,1478855373.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:34.172Z,1478855374.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:34.188Z,1478855374.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:34.576Z,1478855374.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:34.595Z,1478855374.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:34.973Z,1478855374.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:34.993Z,1478855374.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:35.372Z,1478855375.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:35.387Z,1478855375.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:35.781Z,1478855375.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:35.796Z,1478855375.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:36.165Z,1478855376.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:36.195Z,1478855376.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:36.565Z,1478855376.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:36.590Z,1478855376.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:36.972Z,1478855376.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:37.003Z,1478855377.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:37.365Z,1478855377.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:37.397Z,1478855377.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:37.765Z,1478855377.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:37.788Z,1478855377.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:38.173Z,1478855378.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:38.205Z,1478855378.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:38.565Z,1478855378.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:38.592Z,1478855378.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:38.965Z,1478855378.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:39.005Z,1478855379.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:39.365Z,1478855379.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:39.385Z,1478855379.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:39.765Z,1478855379.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:39.785Z,1478855379.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:40.173Z,1478855380.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:40.189Z,1478855380.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:40.573Z,1478855380.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:40.593Z,1478855380.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:40.971Z,1478855380.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:40.989Z,1478855380.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:41.372Z,1478855381.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:41.388Z,1478855381.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:41.774Z,1478855381.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:41.794Z,1478855381.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:42.171Z,1478855382.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:42.194Z,1478855382.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:42.573Z,1478855382.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:42.589Z,1478855382.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:42.968Z,1478855382.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:42.996Z,1478855382.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:43.365Z,1478855383.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:43.397Z,1478855383.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:43.765Z,1478855383.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:43.797Z,1478855383.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:44.165Z,1478855384.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:44.196Z,1478855384.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:44.565Z,1478855384.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:44.640Z,1478855384.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:44.976Z,1478855384.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:44.992Z,1478855384.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:45.373Z,1478855385.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:45.429Z,1478855385.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:45.771Z,1478855385.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:45.793Z,1478855385.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:46.172Z,1478855386.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:46.225Z,1478855386.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:46.568Z,1478855386.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:46.615Z,1478855386.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:46.968Z,1478855386.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:46.997Z,1478855386.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:47.366Z,1478855387.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:47.398Z,1478855387.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:47.766Z,1478855387.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:47.797Z,1478855387.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:48.165Z,1478855388.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:48.201Z,1478855388.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:48.565Z,1478855388.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:48.597Z,1478855388.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:48.965Z,1478855388.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:48.982Z,1478855388.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:49.365Z,1478855389.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:49.385Z,1478855389.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:49.765Z,1478855389.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:49.780Z,1478855389.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:50.165Z,1478855390.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:50.185Z,1478855390.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:50.568Z,1478855390.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:50.589Z,1478855390.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:50.969Z,1478855390.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:50.984Z,1478855390.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:51.372Z,1478855391.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:51.387Z,1478855391.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:51.771Z,1478855391.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:51.793Z,1478855391.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:52.172Z,1478855392.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:52.187Z,1478855392.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:52.571Z,1478855392.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:52.597Z,1478855392.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:52.972Z,1478855392.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:52.993Z,1478855392.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:53.365Z,1478855393.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:53.390Z,1478855393.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:53.765Z,1478855393.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:53.797Z,1478855393.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:54.165Z,1478855394.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:54.197Z,1478855394.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:54.569Z,1478855394.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:54.594Z,1478855394.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:54.965Z,1478855394.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:55.001Z,1478855395.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:55.365Z,1478855395.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:55.408Z,1478855395.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:55.765Z,1478855395.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:55.801Z,1478855395.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:56.169Z,1478855396.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:56.212Z,1478855396.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:56.565Z,1478855396.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:56.585Z,1478855396.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:56.965Z,1478855396.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:56.985Z,1478855396.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:57.372Z,1478855397.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:57.388Z,1478855397.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:57.772Z,1478855397.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:57.787Z,1478855397.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:58.172Z,1478855398.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:58.188Z,1478855398.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:58.572Z,1478855398.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:58.605Z,1478855398.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:58.976Z,1478855398.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:58.991Z,1478855398.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:59.373Z,1478855399.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:59.389Z,1478855399.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:09:59.772Z,1478855399.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:09:59.798Z,1478855399.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:00.172Z,1478855400.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:00.189Z,1478855400.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:00.572Z,1478855400.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:00.588Z,1478855400.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:00.965Z,1478855400.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:00.998Z,1478855400.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:01.365Z,1478855401.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:01.398Z,1478855401.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:01.765Z,1478855401.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:01.781Z,1478855401.782 [BPC1](ERROR): Failed to receive battery data
2016-11-11T09:10:01.782Z,1478855401.782 [BPC1] Communications Fault, FailCount= 1
2016-11-11T09:10:01.782Z,1478855401.782 [BPC1](ERROR): Communications Fault
2016-11-11T09:10:01.794Z,1478855401.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:01.832Z,1478855401.832 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T09:10:02.165Z,1478855402.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:02.208Z,1478855402.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:02.565Z,1478855402.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:02.580Z,1478855402.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:02.965Z,1478855402.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:02.985Z,1478855402.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:03.038Z,1478855403.038 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:10:03.038Z,1478855403.038 [BPC1] No Fault, FailCount= 1
2016-11-11T09:10:03.368Z,1478855403.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:03.442Z,1478855403.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:03.765Z,1478855403.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:03.815Z,1478855403.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:04.168Z,1478855404.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:04.184Z,1478855404.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:04.569Z,1478855404.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:04.584Z,1478855404.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:04.976Z,1478855404.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:04.991Z,1478855404.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:05.372Z,1478855405.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:05.389Z,1478855405.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:05.772Z,1478855405.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:05.789Z,1478855405.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:06.171Z,1478855406.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:06.186Z,1478855406.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:06.572Z,1478855406.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:06.587Z,1478855406.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:06.974Z,1478855406.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:06.989Z,1478855406.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:10.354Z,1478855410.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:10.383Z,1478855410.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:10.484Z,1478855410.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:10.533Z,1478855410.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:10.840Z,1478855410.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:10.865Z,1478855410.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:11.244Z,1478855411.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:11.260Z,1478855411.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:11.640Z,1478855411.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:11.673Z,1478855411.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:12.037Z,1478855412.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:12.073Z,1478855412.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:12.437Z,1478855412.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:12.463Z,1478855412.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:12.853Z,1478855412.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:12.869Z,1478855412.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:13.238Z,1478855413.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:13.273Z,1478855413.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:13.638Z,1478855413.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:13.661Z,1478855413.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:14.038Z,1478855414.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:14.053Z,1478855414.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:14.438Z,1478855414.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:14.489Z,1478855414.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:14.844Z,1478855414.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:14.859Z,1478855414.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:15.246Z,1478855415.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:15.262Z,1478855415.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:15.643Z,1478855415.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:15.665Z,1478855415.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:16.044Z,1478855416.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:16.110Z,1478855416.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:16.445Z,1478855416.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:16.461Z,1478855416.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:16.844Z,1478855416.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:16.900Z,1478855416.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:17.244Z,1478855417.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:17.282Z,1478855417.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:17.645Z,1478855417.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:17.660Z,1478855417.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:18.052Z,1478855418.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:18.067Z,1478855418.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:18.437Z,1478855418.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:18.469Z,1478855418.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:18.841Z,1478855418.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:18.873Z,1478855418.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:19.237Z,1478855419.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:19.270Z,1478855419.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:19.637Z,1478855419.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:19.670Z,1478855419.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:20.037Z,1478855420.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:20.069Z,1478855420.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:20.437Z,1478855420.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:20.478Z,1478855420.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:20.854Z,1478855420.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:20.885Z,1478855420.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:21.237Z,1478855421.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:21.257Z,1478855421.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:21.644Z,1478855421.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:21.659Z,1478855421.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:22.044Z,1478855422.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:22.059Z,1478855422.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:22.445Z,1478855422.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:22.461Z,1478855422.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:22.845Z,1478855422.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:22.864Z,1478855422.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:23.245Z,1478855423.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:23.265Z,1478855423.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:23.637Z,1478855423.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:23.668Z,1478855423.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:24.037Z,1478855424.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:24.073Z,1478855424.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:24.440Z,1478855424.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:24.478Z,1478855424.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:24.837Z,1478855424.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:24.873Z,1478855424.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:25.237Z,1478855425.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:25.276Z,1478855425.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:25.637Z,1478855425.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:25.673Z,1478855425.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:26.041Z,1478855426.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:26.075Z,1478855426.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:26.437Z,1478855426.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:26.472Z,1478855426.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:26.837Z,1478855426.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:26.873Z,1478855426.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:27.237Z,1478855427.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:27.273Z,1478855427.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:27.637Z,1478855427.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:27.672Z,1478855427.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:28.037Z,1478855428.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:28.101Z,1478855428.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:28.445Z,1478855428.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:28.465Z,1478855428.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:28.844Z,1478855428.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:28.878Z,1478855428.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:29.244Z,1478855429.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:29.265Z,1478855429.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:29.645Z,1478855429.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:29.660Z,1478855429.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:30.037Z,1478855430.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:30.086Z,1478855430.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:30.437Z,1478855430.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:30.471Z,1478855430.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:30.837Z,1478855430.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:30.889Z,1478855430.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:31.237Z,1478855431.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:31.287Z,1478855431.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:31.637Z,1478855431.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:31.672Z,1478855431.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:32.037Z,1478855432.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:32.068Z,1478855432.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:32.437Z,1478855432.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:32.472Z,1478855432.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:32.837Z,1478855432.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:32.872Z,1478855432.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:33.237Z,1478855433.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:33.268Z,1478855433.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:33.637Z,1478855433.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:33.680Z,1478855433.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:34.037Z,1478855434.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:34.080Z,1478855434.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:34.437Z,1478855434.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:34.452Z,1478855434.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:34.837Z,1478855434.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:34.857Z,1478855434.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:35.241Z,1478855435.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:35.284Z,1478855435.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:35.637Z,1478855435.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:35.652Z,1478855435.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:36.037Z,1478855436.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:36.057Z,1478855436.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:36.441Z,1478855436.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:36.461Z,1478855436.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:36.844Z,1478855436.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:36.859Z,1478855436.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:37.237Z,1478855437.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:37.261Z,1478855437.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:37.637Z,1478855437.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:37.669Z,1478855437.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:38.037Z,1478855438.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:38.064Z,1478855438.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:38.437Z,1478855438.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:38.473Z,1478855438.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:38.841Z,1478855438.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:38.877Z,1478855438.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:39.237Z,1478855439.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:39.252Z,1478855439.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:39.637Z,1478855439.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:39.667Z,1478855439.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:40.045Z,1478855440.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:40.065Z,1478855440.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:40.445Z,1478855440.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:40.465Z,1478855440.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:40.858Z,1478855440.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:40.903Z,1478855440.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:41.240Z,1478855441.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:41.273Z,1478855441.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:41.645Z,1478855441.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:41.705Z,1478855441.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:42.045Z,1478855442.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:42.065Z,1478855442.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:42.449Z,1478855442.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:42.476Z,1478855442.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:42.837Z,1478855442.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:42.869Z,1478855442.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:43.248Z,1478855443.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:43.289Z,1478855443.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:43.637Z,1478855443.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:43.673Z,1478855443.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:44.037Z,1478855444.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:44.073Z,1478855444.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:44.437Z,1478855444.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:44.489Z,1478855444.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:44.837Z,1478855444.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:44.873Z,1478855444.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:45.237Z,1478855445.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:45.285Z,1478855445.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:45.637Z,1478855445.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:45.673Z,1478855445.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:46.041Z,1478855446.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:46.083Z,1478855446.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:46.437Z,1478855446.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:46.469Z,1478855446.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:46.837Z,1478855446.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:46.880Z,1478855446.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:47.241Z,1478855447.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:47.277Z,1478855447.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:47.637Z,1478855447.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:47.677Z,1478855447.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:48.037Z,1478855448.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:48.057Z,1478855448.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:48.441Z,1478855448.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:48.456Z,1478855448.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:48.841Z,1478855448.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:48.856Z,1478855448.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:49.245Z,1478855449.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:49.272Z,1478855449.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:49.639Z,1478855449.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:49.673Z,1478855449.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:50.044Z,1478855450.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:50.060Z,1478855450.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:50.437Z,1478855450.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:50.473Z,1478855450.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:50.837Z,1478855450.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:50.869Z,1478855450.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:51.237Z,1478855451.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:51.270Z,1478855451.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:51.637Z,1478855451.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:51.674Z,1478855451.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:52.037Z,1478855452.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:52.069Z,1478855452.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:52.437Z,1478855452.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:52.468Z,1478855452.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:52.838Z,1478855452.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:52.873Z,1478855452.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:53.238Z,1478855453.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:53.253Z,1478855453.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:53.638Z,1478855453.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:53.670Z,1478855453.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:54.047Z,1478855454.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:54.062Z,1478855454.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:54.444Z,1478855454.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:54.466Z,1478855454.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:54.844Z,1478855454.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:54.864Z,1478855454.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:55.249Z,1478855455.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:55.269Z,1478855455.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:55.648Z,1478855455.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:55.669Z,1478855455.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:56.037Z,1478855456.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:56.073Z,1478855456.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:56.437Z,1478855456.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:56.468Z,1478855456.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:56.837Z,1478855456.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:56.852Z,1478855456.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:57.237Z,1478855457.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:57.278Z,1478855457.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:57.637Z,1478855457.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:57.661Z,1478855457.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:58.044Z,1478855458.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:58.090Z,1478855458.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:58.444Z,1478855458.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:58.460Z,1478855458.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:58.844Z,1478855458.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:58.898Z,1478855458.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:59.241Z,1478855459.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:59.273Z,1478855459.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:10:59.637Z,1478855459.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:10:59.685Z,1478855459.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:00.037Z,1478855460.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:00.093Z,1478855460.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:00.441Z,1478855460.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:00.455Z,1478855460.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:00.841Z,1478855460.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:00.856Z,1478855460.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:01.245Z,1478855461.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:01.259Z,1478855461.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:01.645Z,1478855461.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:01.665Z,1478855461.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:02.045Z,1478855462.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:02.060Z,1478855462.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:02.444Z,1478855462.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:02.459Z,1478855462.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:02.845Z,1478855462.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:02.860Z,1478855462.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:03.237Z,1478855463.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:03.269Z,1478855463.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:03.637Z,1478855463.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:03.671Z,1478855463.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:04.037Z,1478855464.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:04.071Z,1478855464.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:04.437Z,1478855464.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:04.469Z,1478855464.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:04.837Z,1478855464.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:04.871Z,1478855464.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:05.237Z,1478855465.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:05.271Z,1478855465.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:05.637Z,1478855465.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:05.663Z,1478855465.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:06.037Z,1478855466.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:06.071Z,1478855466.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:06.079Z,1478855466.079 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T09:11:06.080Z,1478855466.080 [Default:CheckIn:C.Wait] Stopped
2016-11-11T09:11:06.080Z,1478855466.080 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T09:11:06.080Z,1478855466.080 [Default:CheckIn:D] Running Loop=1
2016-11-11T09:11:06.437Z,1478855466.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:06.470Z,1478855466.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:06.479Z,1478855466.479 [Default:CheckIn:D] Stopped
2016-11-11T09:11:06.479Z,1478855466.479 [Default:CheckIn:E] Running Loop=1
2016-11-11T09:11:06.837Z,1478855466.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:06.869Z,1478855466.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:06.878Z,1478855466.878 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 261.086149 min 
2016-11-11T09:11:06.878Z,1478855466.878 [Default:CheckIn:E] Stopped
2016-11-11T09:11:06.878Z,1478855466.878 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T09:11:06.879Z,1478855466.879 [Default:CheckIn] Stopped
2016-11-11T09:11:06.879Z,1478855466.879 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T09:11:06.879Z,1478855466.879 [Default:CheckIn](INFO): Running loop #26
2016-11-11T09:11:06.879Z,1478855466.879 [Default:CheckIn] Running Loop=26
2016-11-11T09:11:06.879Z,1478855466.879 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T09:11:06.879Z,1478855466.879 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T09:11:07.237Z,1478855467.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:07.269Z,1478855467.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:10.664Z,1478855470.664 [NAL9602](INFO): Powering up
2016-11-11T09:11:10.681Z,1478855470.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:10.720Z,1478855470.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:10.822Z,1478855470.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:10.869Z,1478855470.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:11.176Z,1478855471.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:11.230Z,1478855471.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:11.572Z,1478855471.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:11.609Z,1478855471.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:11.976Z,1478855471.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:12.041Z,1478855472.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:12.369Z,1478855472.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:12.403Z,1478855472.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:12.769Z,1478855472.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:12.834Z,1478855472.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:13.169Z,1478855473.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:13.209Z,1478855473.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:13.569Z,1478855473.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:13.649Z,1478855473.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:13.969Z,1478855473.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:14.041Z,1478855474.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:14.369Z,1478855474.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:14.413Z,1478855474.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:14.773Z,1478855474.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:14.811Z,1478855474.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:15.169Z,1478855475.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:15.229Z,1478855475.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:15.573Z,1478855475.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:15.600Z,1478855475.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:15.976Z,1478855475.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:15.993Z,1478855475.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:16.379Z,1478855476.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:16.402Z,1478855476.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:16.413Z,1478855476.413 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:16.413Z,1478855476.413 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 68
2016-11-11T09:11:16.413Z,1478855476.413 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:11:16.419Z,1478855476.419 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:16.419Z,1478855476.419 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 68
2016-11-11T09:11:16.419Z,1478855476.419 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:11:16.450Z,1478855476.450 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:11:16.451Z,1478855476.451 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:11:16.769Z,1478855476.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:16.805Z,1478855476.805 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:16.805Z,1478855476.805 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2016-11-11T09:11:16.805Z,1478855476.805 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:11:16.845Z,1478855476.845 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:11:16.845Z,1478855476.845 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:11:16.845Z,1478855476.845 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 68
2016-11-11T09:11:16.846Z,1478855476.846 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:11:16.846Z,1478855476.846 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 68
2016-11-11T09:11:17.169Z,1478855477.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:17.192Z,1478855477.192 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:11:17.193Z,1478855477.193 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:11:17.193Z,1478855477.193 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:11:17.193Z,1478855477.193 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:11:17.194Z,1478855477.194 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:11:17.194Z,1478855477.194 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:11:17.240Z,1478855477.240 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:11:17.240Z,1478855477.240 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2016-11-11T09:11:17.577Z,1478855477.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:17.593Z,1478855477.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:11:17.593Z,1478855477.593 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:11:17.594Z,1478855477.594 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:11:17.977Z,1478855477.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:17.994Z,1478855477.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-11T09:11:17.995Z,1478855477.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:18.375Z,1478855478.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:18.394Z,1478855478.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-11T09:11:18.396Z,1478855478.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:18.773Z,1478855478.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:18.795Z,1478855478.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-11T09:11:18.797Z,1478855478.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:19.176Z,1478855479.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:19.192Z,1478855479.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-11T09:11:19.193Z,1478855479.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:19.577Z,1478855479.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:19.594Z,1478855479.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-11T09:11:19.595Z,1478855479.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:19.980Z,1478855479.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:20.036Z,1478855480.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-11T09:11:20.037Z,1478855480.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:20.369Z,1478855480.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:20.396Z,1478855480.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-11T09:11:20.397Z,1478855480.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:20.769Z,1478855480.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:20.804Z,1478855480.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-11T09:11:20.805Z,1478855480.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:21.180Z,1478855481.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:21.217Z,1478855481.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-11T09:11:21.218Z,1478855481.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:21.557Z,1478855481.557 [NAL9602](INFO): NAL9602 initialized
2016-11-11T09:11:21.574Z,1478855481.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:21.607Z,1478855481.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-11T09:11:21.612Z,1478855481.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:21.974Z,1478855481.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:22.003Z,1478855482.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-11T09:11:22.004Z,1478855482.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:22.353Z,1478855482.353 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T09:11:22.353Z,1478855482.353 [NAL9602] Data Fault, FailCount= 3
2016-11-11T09:11:22.353Z,1478855482.353 [NAL9602](ERROR): Data Fault
2016-11-11T09:11:22.375Z,1478855482.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:22.412Z,1478855482.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-11T09:11:22.413Z,1478855482.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:22.454Z,1478855482.454 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T09:11:22.752Z,1478855482.753 [NAL9602](INFO): Powering down
2016-11-11T09:11:22.776Z,1478855482.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:22.815Z,1478855482.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-11T09:11:22.816Z,1478855482.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:23.169Z,1478855483.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:23.208Z,1478855483.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-11T09:11:23.209Z,1478855483.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:23.573Z,1478855483.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:23.611Z,1478855483.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-11T09:11:23.616Z,1478855483.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:23.656Z,1478855483.656 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T09:11:23.656Z,1478855483.657 [NAL9602] No Fault, FailCount= 3
2016-11-11T09:11:23.973Z,1478855483.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:23.990Z,1478855483.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2016-11-11T09:11:23.991Z,1478855483.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:24.370Z,1478855484.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:24.391Z,1478855484.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2016-11-11T09:11:24.392Z,1478855484.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:24.776Z,1478855484.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:24.820Z,1478855484.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2016-11-11T09:11:24.821Z,1478855484.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:25.176Z,1478855485.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:25.193Z,1478855485.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2016-11-11T09:11:25.194Z,1478855485.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:25.576Z,1478855485.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:25.605Z,1478855485.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2016-11-11T09:11:25.606Z,1478855485.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:25.978Z,1478855485.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:26.045Z,1478855486.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2016-11-11T09:11:26.046Z,1478855486.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:26.369Z,1478855486.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:26.437Z,1478855486.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2016-11-11T09:11:26.438Z,1478855486.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:26.769Z,1478855486.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:26.829Z,1478855486.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2016-11-11T09:11:26.830Z,1478855486.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:27.169Z,1478855487.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:27.183Z,1478855487.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2016-11-11T09:11:27.184Z,1478855487.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:27.569Z,1478855487.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:27.621Z,1478855487.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2016-11-11T09:11:27.622Z,1478855487.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:27.956Z,1478855487.956 [NAL9602](INFO): Powering up NAL9602
2016-11-11T09:11:27.973Z,1478855487.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:28.026Z,1478855488.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2016-11-11T09:11:28.027Z,1478855488.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:28.369Z,1478855488.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:28.390Z,1478855488.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2016-11-11T09:11:28.391Z,1478855488.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:28.772Z,1478855488.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:28.789Z,1478855488.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2016-11-11T09:11:28.790Z,1478855488.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:29.176Z,1478855489.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:29.200Z,1478855489.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2016-11-11T09:11:29.201Z,1478855489.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:29.576Z,1478855489.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:29.600Z,1478855489.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2016-11-11T09:11:29.601Z,1478855489.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:29.980Z,1478855489.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:30.045Z,1478855490.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2016-11-11T09:11:30.046Z,1478855490.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:30.369Z,1478855490.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:30.402Z,1478855490.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2016-11-11T09:11:30.403Z,1478855490.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:30.769Z,1478855490.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:30.810Z,1478855490.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2016-11-11T09:11:30.811Z,1478855490.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:31.169Z,1478855491.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:31.215Z,1478855491.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2016-11-11T09:11:31.216Z,1478855491.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:31.569Z,1478855491.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:31.653Z,1478855491.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2016-11-11T09:11:31.654Z,1478855491.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:31.965Z,1478855491.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:31.980Z,1478855491.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2016-11-11T09:11:31.981Z,1478855491.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:32.369Z,1478855492.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:32.391Z,1478855492.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2016-11-11T09:11:32.408Z,1478855492.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:32.772Z,1478855492.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:32.816Z,1478855492.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2016-11-11T09:11:32.817Z,1478855492.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:33.172Z,1478855493.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:33.194Z,1478855493.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2016-11-11T09:11:33.220Z,1478855493.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:33.572Z,1478855493.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:33.592Z,1478855493.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2016-11-11T09:11:33.593Z,1478855493.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:33.974Z,1478855493.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:33.994Z,1478855493.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2016-11-11T09:11:33.996Z,1478855493.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:34.376Z,1478855494.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:34.392Z,1478855494.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2016-11-11T09:11:34.393Z,1478855494.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:34.776Z,1478855494.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:34.793Z,1478855494.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2016-11-11T09:11:34.794Z,1478855494.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:35.176Z,1478855495.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:35.194Z,1478855495.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2016-11-11T09:11:35.196Z,1478855495.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:35.575Z,1478855495.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:35.595Z,1478855495.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2016-11-11T09:11:35.596Z,1478855495.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:35.976Z,1478855495.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:36.004Z,1478855496.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2016-11-11T09:11:36.005Z,1478855496.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:36.376Z,1478855496.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:36.394Z,1478855496.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2016-11-11T09:11:36.395Z,1478855496.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:36.769Z,1478855496.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:36.801Z,1478855496.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2016-11-11T09:11:36.802Z,1478855496.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:37.169Z,1478855497.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:37.204Z,1478855497.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:37.569Z,1478855497.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:37.591Z,1478855497.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:37.969Z,1478855497.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:37.984Z,1478855497.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:38.369Z,1478855498.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:38.384Z,1478855498.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:38.780Z,1478855498.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:38.826Z,1478855498.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:39.153Z,1478855499.153 [NAL9602](INFO): NAL9602 initialized
2016-11-11T09:11:39.178Z,1478855499.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:39.213Z,1478855499.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:39.578Z,1478855499.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:39.633Z,1478855499.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:39.987Z,1478855499.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:40.004Z,1478855500.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:40.392Z,1478855500.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:40.441Z,1478855500.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:40.792Z,1478855500.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:40.807Z,1478855500.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:41.169Z,1478855501.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:41.235Z,1478855501.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:41.570Z,1478855501.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:41.622Z,1478855501.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:41.994Z,1478855501.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:42.009Z,1478855502.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:42.387Z,1478855502.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:42.415Z,1478855502.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:42.824Z,1478855502.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:42.855Z,1478855502.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:43.178Z,1478855503.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:43.233Z,1478855503.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:43.569Z,1478855503.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:43.605Z,1478855503.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:43.969Z,1478855503.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:44.017Z,1478855504.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:44.370Z,1478855504.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:44.409Z,1478855504.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:44.769Z,1478855504.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:44.812Z,1478855504.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:45.172Z,1478855505.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:45.195Z,1478855505.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:45.573Z,1478855505.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:45.595Z,1478855505.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:45.977Z,1478855505.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:46.003Z,1478855506.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:46.383Z,1478855506.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:46.425Z,1478855506.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:46.784Z,1478855506.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:46.833Z,1478855506.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:47.172Z,1478855507.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:47.205Z,1478855507.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:47.576Z,1478855507.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:47.602Z,1478855507.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:47.974Z,1478855507.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:48.009Z,1478855508.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:48.369Z,1478855508.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:48.430Z,1478855508.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:48.799Z,1478855508.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:48.821Z,1478855508.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:49.184Z,1478855509.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:49.213Z,1478855509.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:49.573Z,1478855509.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:49.613Z,1478855509.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:49.969Z,1478855509.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:50.005Z,1478855510.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:50.377Z,1478855510.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:50.413Z,1478855510.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:50.769Z,1478855510.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:50.791Z,1478855510.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:51.172Z,1478855511.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:51.195Z,1478855511.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:51.577Z,1478855511.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:51.595Z,1478855511.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:51.973Z,1478855511.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:52.000Z,1478855512.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:52.376Z,1478855512.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:52.452Z,1478855512.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:52.774Z,1478855512.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:52.801Z,1478855512.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:53.173Z,1478855513.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:53.197Z,1478855513.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:53.577Z,1478855513.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:53.614Z,1478855513.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:53.984Z,1478855513.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:54.010Z,1478855514.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:54.370Z,1478855514.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:54.405Z,1478855514.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:54.769Z,1478855514.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:54.817Z,1478855514.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:55.178Z,1478855515.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:55.207Z,1478855515.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:55.569Z,1478855515.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:55.621Z,1478855515.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:55.969Z,1478855515.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:55.985Z,1478855515.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:56.377Z,1478855516.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:56.425Z,1478855516.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:56.772Z,1478855516.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:56.812Z,1478855516.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:57.184Z,1478855517.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:57.205Z,1478855517.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:57.584Z,1478855517.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:57.609Z,1478855517.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:57.973Z,1478855517.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:57.997Z,1478855517.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:58.377Z,1478855518.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:58.395Z,1478855518.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:58.772Z,1478855518.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:58.805Z,1478855518.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:59.169Z,1478855519.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:59.205Z,1478855519.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:59.569Z,1478855519.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:11:59.637Z,1478855519.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:11:59.982Z,1478855519.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:00.029Z,1478855520.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:00.373Z,1478855520.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:00.398Z,1478855520.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:00.776Z,1478855520.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:00.795Z,1478855520.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:01.174Z,1478855521.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:01.209Z,1478855521.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:01.586Z,1478855521.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:01.604Z,1478855521.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:01.990Z,1478855521.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:02.009Z,1478855522.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:02.370Z,1478855522.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:02.407Z,1478855522.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:02.800Z,1478855522.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:02.837Z,1478855522.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:03.169Z,1478855523.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:03.255Z,1478855523.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:03.570Z,1478855523.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:03.586Z,1478855523.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:03.969Z,1478855523.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:04.014Z,1478855524.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:04.376Z,1478855524.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:04.421Z,1478855524.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:04.774Z,1478855524.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:04.818Z,1478855524.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:05.169Z,1478855525.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:05.214Z,1478855525.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:05.569Z,1478855525.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:05.604Z,1478855525.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:05.995Z,1478855525.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:06.019Z,1478855526.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:06.380Z,1478855526.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:06.418Z,1478855526.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:06.769Z,1478855526.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:06.819Z,1478855526.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:07.177Z,1478855527.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:07.194Z,1478855527.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:07.578Z,1478855527.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:07.595Z,1478855527.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:10.830Z,1478855530.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:10.878Z,1478855530.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:10.980Z,1478855530.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:11.009Z,1478855531.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:11.358Z,1478855531.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:11.389Z,1478855531.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:11.754Z,1478855531.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:11.793Z,1478855531.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:12.162Z,1478855532.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:12.189Z,1478855532.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:12.559Z,1478855532.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:12.603Z,1478855532.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:12.962Z,1478855532.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:12.977Z,1478855532.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:13.366Z,1478855533.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:13.417Z,1478855533.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:13.768Z,1478855533.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:13.819Z,1478855533.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:14.163Z,1478855534.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:14.178Z,1478855534.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:14.562Z,1478855534.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:14.583Z,1478855534.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:14.965Z,1478855534.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:14.981Z,1478855534.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:15.365Z,1478855535.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:15.381Z,1478855535.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:15.761Z,1478855535.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:15.783Z,1478855535.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:16.154Z,1478855536.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:16.184Z,1478855536.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:16.570Z,1478855536.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:16.585Z,1478855536.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:16.960Z,1478855536.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:16.994Z,1478855536.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:17.358Z,1478855537.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:17.393Z,1478855537.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:17.754Z,1478855537.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:17.781Z,1478855537.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:18.158Z,1478855538.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:18.189Z,1478855538.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:18.559Z,1478855538.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:18.591Z,1478855538.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:18.967Z,1478855538.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:19.029Z,1478855539.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:19.367Z,1478855539.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:19.398Z,1478855539.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:19.770Z,1478855539.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:19.793Z,1478855539.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:20.156Z,1478855540.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:20.189Z,1478855540.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:20.553Z,1478855540.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:20.589Z,1478855540.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:20.962Z,1478855540.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:20.989Z,1478855540.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:21.358Z,1478855541.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:21.392Z,1478855541.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:21.755Z,1478855541.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:21.790Z,1478855541.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:22.162Z,1478855542.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:22.188Z,1478855542.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:22.554Z,1478855542.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:22.594Z,1478855542.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:22.954Z,1478855542.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:22.986Z,1478855542.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:23.354Z,1478855543.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:23.390Z,1478855543.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:23.754Z,1478855543.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:23.781Z,1478855543.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:24.158Z,1478855544.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:24.189Z,1478855544.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:24.563Z,1478855544.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:24.582Z,1478855544.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:24.961Z,1478855544.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:24.970Z,1478855544.970 [BPC1](ERROR): Failed to parse message.
2016-11-11T09:12:24.970Z,1478855544.970 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T09:12:24.970Z,1478855544.970 [BPC1] Data Fault, FailCount= 1
2016-11-11T09:12:24.970Z,1478855544.970 [BPC1](ERROR): Data Fault
2016-11-11T09:12:24.978Z,1478855544.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:24.998Z,1478855544.998 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:12:25.360Z,1478855545.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:25.396Z,1478855545.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:25.757Z,1478855545.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:25.793Z,1478855545.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:26.154Z,1478855546.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:26.188Z,1478855546.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:26.221Z,1478855546.221 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:12:26.221Z,1478855546.221 [BPC1] No Fault, FailCount= 1
2016-11-11T09:12:26.553Z,1478855546.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:26.636Z,1478855546.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:26.958Z,1478855546.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:27.013Z,1478855547.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:27.368Z,1478855547.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:27.394Z,1478855547.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:27.764Z,1478855547.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:27.780Z,1478855547.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:28.164Z,1478855548.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:28.185Z,1478855548.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:28.562Z,1478855548.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:28.576Z,1478855548.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:28.964Z,1478855548.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:28.980Z,1478855548.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:29.361Z,1478855549.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:29.385Z,1478855549.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:29.753Z,1478855549.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:29.779Z,1478855549.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:30.153Z,1478855550.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:30.185Z,1478855550.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:30.561Z,1478855550.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:30.583Z,1478855550.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:30.953Z,1478855550.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:30.988Z,1478855550.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:31.353Z,1478855551.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:31.385Z,1478855551.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:31.757Z,1478855551.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:31.793Z,1478855551.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:32.154Z,1478855552.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:32.195Z,1478855552.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:32.554Z,1478855552.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:32.585Z,1478855552.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:32.953Z,1478855552.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:32.993Z,1478855552.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:33.357Z,1478855553.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:33.377Z,1478855553.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:33.757Z,1478855553.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:33.772Z,1478855553.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:34.161Z,1478855554.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:34.176Z,1478855554.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:34.556Z,1478855554.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:34.584Z,1478855554.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:34.964Z,1478855554.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:34.979Z,1478855554.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:35.362Z,1478855555.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:35.382Z,1478855555.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:35.775Z,1478855555.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:35.790Z,1478855555.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:36.161Z,1478855556.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:36.183Z,1478855556.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:36.553Z,1478855556.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:36.585Z,1478855556.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:36.953Z,1478855556.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:36.986Z,1478855556.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:37.353Z,1478855557.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:37.385Z,1478855557.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:37.757Z,1478855557.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:37.817Z,1478855557.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:38.154Z,1478855558.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:38.193Z,1478855558.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:38.554Z,1478855558.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:38.589Z,1478855558.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:38.957Z,1478855558.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:38.973Z,1478855558.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:39.353Z,1478855559.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:39.413Z,1478855559.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:39.759Z,1478855559.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:39.782Z,1478855559.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:40.164Z,1478855560.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:40.216Z,1478855560.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:40.565Z,1478855560.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:40.580Z,1478855560.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:40.956Z,1478855560.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:41.007Z,1478855561.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:41.365Z,1478855561.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:41.417Z,1478855561.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:41.761Z,1478855561.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:41.781Z,1478855561.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:42.156Z,1478855562.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:42.189Z,1478855562.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:42.565Z,1478855562.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:42.585Z,1478855562.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:42.966Z,1478855562.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:42.981Z,1478855562.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:43.353Z,1478855563.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:43.385Z,1478855563.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:43.761Z,1478855563.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:43.783Z,1478855563.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:44.154Z,1478855564.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:44.188Z,1478855564.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:44.553Z,1478855564.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:44.585Z,1478855564.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:44.964Z,1478855564.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:44.987Z,1478855564.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:45.353Z,1478855565.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:45.388Z,1478855565.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:45.753Z,1478855565.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:45.785Z,1478855565.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:46.157Z,1478855566.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:46.189Z,1478855566.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:46.556Z,1478855566.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:46.635Z,1478855566.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:46.956Z,1478855566.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:46.996Z,1478855566.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:47.354Z,1478855567.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:47.398Z,1478855567.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:47.755Z,1478855567.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:47.812Z,1478855567.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:48.159Z,1478855568.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:48.221Z,1478855568.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:48.563Z,1478855568.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:48.587Z,1478855568.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:48.954Z,1478855568.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:48.989Z,1478855568.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:49.360Z,1478855569.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:49.400Z,1478855569.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:49.738Z,1478855569.738 [NAL9602](INFO): SBD MO Status=2, MOMSN=341, MT Status=2, MTMSN=0
2016-11-11T09:12:49.738Z,1478855569.738 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T09:12:49.756Z,1478855569.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:49.818Z,1478855569.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:50.173Z,1478855570.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:50.223Z,1478855570.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:50.564Z,1478855570.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:50.592Z,1478855570.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:50.983Z,1478855570.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:51.007Z,1478855571.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:51.356Z,1478855571.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:51.399Z,1478855571.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:51.759Z,1478855571.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:51.810Z,1478855571.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:52.164Z,1478855572.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:52.257Z,1478855572.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:52.560Z,1478855572.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:52.596Z,1478855572.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:52.956Z,1478855572.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:53.034Z,1478855573.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:53.355Z,1478855573.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:53.422Z,1478855573.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:53.755Z,1478855573.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:53.802Z,1478855573.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:54.170Z,1478855574.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:54.210Z,1478855574.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:54.588Z,1478855574.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:54.660Z,1478855574.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:54.982Z,1478855574.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:55.009Z,1478855575.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:55.356Z,1478855575.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:55.425Z,1478855575.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:55.765Z,1478855575.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:55.821Z,1478855575.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:56.163Z,1478855576.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:56.218Z,1478855576.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:56.558Z,1478855576.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:56.581Z,1478855576.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:56.981Z,1478855576.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:57.027Z,1478855577.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:57.376Z,1478855577.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:57.391Z,1478855577.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:57.772Z,1478855577.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:57.788Z,1478855577.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:58.153Z,1478855578.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:58.206Z,1478855578.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:58.559Z,1478855578.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:58.577Z,1478855578.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:58.957Z,1478855578.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:58.973Z,1478855578.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:59.361Z,1478855579.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:59.381Z,1478855579.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:12:59.775Z,1478855579.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:12:59.824Z,1478855579.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:00.163Z,1478855580.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:00.187Z,1478855580.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:00.564Z,1478855580.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:00.598Z,1478855580.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:00.955Z,1478855580.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:01.002Z,1478855581.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:01.355Z,1478855581.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:01.393Z,1478855581.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:01.755Z,1478855581.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:01.797Z,1478855581.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:02.155Z,1478855582.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:02.199Z,1478855582.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:02.556Z,1478855582.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:02.604Z,1478855582.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:02.961Z,1478855582.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:03.011Z,1478855583.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:03.364Z,1478855583.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:03.410Z,1478855583.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:03.763Z,1478855583.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:03.779Z,1478855583.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:04.165Z,1478855584.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:04.215Z,1478855584.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:04.563Z,1478855584.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:04.590Z,1478855584.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:04.960Z,1478855584.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:05.036Z,1478855585.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:05.355Z,1478855585.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:05.405Z,1478855585.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:05.754Z,1478855585.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:05.781Z,1478855585.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:06.170Z,1478855586.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:06.225Z,1478855586.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:06.572Z,1478855586.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:06.597Z,1478855586.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:06.671Z,1478855586.671 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-11T09:13:06.679Z,1478855586.679 [Rowe_600LCM] No Fault, FailCount= 5
2016-11-11T09:13:06.719Z,1478855586.719 [Rowe_600LCM](INFO): Initializing
2016-11-11T09:13:06.720Z,1478855586.720 [Rowe_600LCM](INFO): Checking LCM
2016-11-11T09:13:06.720Z,1478855586.720 [Rowe_600LCM](INFO): LCM OK
2016-11-11T09:13:06.720Z,1478855586.720 [Rowe_600LCM](INFO): Powering up
2016-11-11T09:13:06.955Z,1478855586.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:07.001Z,1478855587.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:07.355Z,1478855587.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:07.396Z,1478855587.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:07.755Z,1478855587.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:07.802Z,1478855587.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:11.018Z,1478855591.018 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-11T09:13:11.182Z,1478855591.182 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-11T09:13:11.190Z,1478855591.190 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-11T09:13:11.191Z,1478855591.191 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-11T09:13:11.192Z,1478855591.192 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-11T09:13:13.347Z,1478855593.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:13.365Z,1478855593.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:13.480Z,1478855593.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:13.510Z,1478855593.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:13.878Z,1478855593.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:13.914Z,1478855593.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:14.274Z,1478855594.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:14.317Z,1478855594.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:14.684Z,1478855594.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:14.720Z,1478855594.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:15.080Z,1478855595.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:15.130Z,1478855595.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:15.474Z,1478855595.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:15.525Z,1478855595.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:15.873Z,1478855595.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:15.897Z,1478855595.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:16.276Z,1478855596.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:16.297Z,1478855596.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:16.678Z,1478855596.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:16.693Z,1478855596.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:17.072Z,1478855597.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:17.096Z,1478855597.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:17.476Z,1478855597.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:17.492Z,1478855597.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:17.892Z,1478855597.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:17.908Z,1478855597.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:18.283Z,1478855598.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:18.353Z,1478855598.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:18.681Z,1478855598.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:18.717Z,1478855598.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:19.077Z,1478855599.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:19.093Z,1478855599.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:19.476Z,1478855599.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:19.492Z,1478855599.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:19.876Z,1478855599.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:19.891Z,1478855599.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:20.273Z,1478855600.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:20.309Z,1478855600.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:20.673Z,1478855600.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:20.695Z,1478855600.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:21.078Z,1478855601.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:21.101Z,1478855601.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:21.470Z,1478855601.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:21.509Z,1478855601.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:21.869Z,1478855601.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:21.901Z,1478855601.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:22.273Z,1478855602.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:22.305Z,1478855602.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:22.670Z,1478855602.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:22.706Z,1478855602.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:23.088Z,1478855603.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:23.111Z,1478855603.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:23.473Z,1478855603.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:23.493Z,1478855603.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:23.870Z,1478855603.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:23.889Z,1478855603.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:24.273Z,1478855604.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:24.293Z,1478855604.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:24.673Z,1478855604.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:24.693Z,1478855604.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:25.070Z,1478855605.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:25.096Z,1478855605.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:25.474Z,1478855605.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:25.490Z,1478855605.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:25.873Z,1478855605.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:25.893Z,1478855605.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:26.273Z,1478855606.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:26.306Z,1478855606.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:26.670Z,1478855606.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:26.693Z,1478855606.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:27.069Z,1478855607.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:27.084Z,1478855607.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:27.470Z,1478855607.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:27.513Z,1478855607.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:27.866Z,1478855607.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:27.882Z,1478855607.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:28.269Z,1478855608.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:28.289Z,1478855608.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:28.674Z,1478855608.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:28.714Z,1478855608.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:29.070Z,1478855609.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:29.092Z,1478855609.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:29.473Z,1478855609.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:29.514Z,1478855609.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:29.874Z,1478855609.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:29.938Z,1478855609.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:30.273Z,1478855610.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:30.293Z,1478855610.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:30.673Z,1478855610.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:30.688Z,1478855610.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:31.070Z,1478855611.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:31.085Z,1478855611.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:31.473Z,1478855611.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:31.493Z,1478855611.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:31.873Z,1478855611.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:31.888Z,1478855611.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:32.274Z,1478855612.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:32.289Z,1478855612.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:32.669Z,1478855612.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:32.689Z,1478855612.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:33.073Z,1478855613.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:33.093Z,1478855613.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:33.470Z,1478855613.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:33.485Z,1478855613.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:33.866Z,1478855613.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:33.882Z,1478855613.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:34.269Z,1478855614.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:34.287Z,1478855614.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:34.674Z,1478855614.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:34.689Z,1478855614.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:35.073Z,1478855615.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:35.106Z,1478855615.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:35.473Z,1478855615.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:35.488Z,1478855615.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:35.874Z,1478855615.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:35.890Z,1478855615.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:36.273Z,1478855616.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:36.293Z,1478855616.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:36.673Z,1478855616.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:36.689Z,1478855616.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:37.074Z,1478855617.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:37.090Z,1478855617.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:37.458Z,1478855617.458 [NAL9602](INFO): SBD MO Status=2, MOMSN=341, MT Status=2, MTMSN=0
2016-11-11T09:13:37.458Z,1478855617.458 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T09:13:37.475Z,1478855617.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:37.491Z,1478855617.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:37.880Z,1478855617.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:37.909Z,1478855617.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:38.279Z,1478855618.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:38.294Z,1478855618.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:38.669Z,1478855618.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:38.689Z,1478855618.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:39.074Z,1478855619.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:39.093Z,1478855619.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:39.521Z,1478855619.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:39.598Z,1478855619.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:39.874Z,1478855619.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:39.890Z,1478855619.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:40.273Z,1478855620.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:40.313Z,1478855620.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:40.692Z,1478855620.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:40.716Z,1478855620.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:41.070Z,1478855621.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:41.100Z,1478855621.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:41.491Z,1478855621.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:41.525Z,1478855621.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:41.880Z,1478855621.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:41.933Z,1478855621.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:42.270Z,1478855622.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:42.289Z,1478855622.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:42.669Z,1478855622.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:42.717Z,1478855622.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:43.070Z,1478855623.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:43.101Z,1478855623.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:43.470Z,1478855623.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:43.517Z,1478855623.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:43.870Z,1478855623.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:43.913Z,1478855623.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:44.271Z,1478855624.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:44.301Z,1478855624.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:44.685Z,1478855624.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:44.709Z,1478855624.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:45.081Z,1478855625.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:45.109Z,1478855625.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:45.470Z,1478855625.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:45.490Z,1478855625.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:45.877Z,1478855625.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:45.914Z,1478855625.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:46.269Z,1478855626.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:46.309Z,1478855626.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:46.674Z,1478855626.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:46.697Z,1478855626.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:47.073Z,1478855627.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:47.094Z,1478855627.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:47.476Z,1478855627.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:47.501Z,1478855627.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:47.869Z,1478855627.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:47.908Z,1478855627.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:48.270Z,1478855628.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:48.293Z,1478855628.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:48.679Z,1478855628.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:48.695Z,1478855628.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:49.077Z,1478855629.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:49.092Z,1478855629.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:49.472Z,1478855629.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:49.504Z,1478855629.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:49.876Z,1478855629.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:49.897Z,1478855629.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:50.269Z,1478855630.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:50.289Z,1478855630.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:50.669Z,1478855630.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:50.689Z,1478855630.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:51.081Z,1478855631.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:51.123Z,1478855631.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:51.485Z,1478855631.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:51.524Z,1478855631.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:51.874Z,1478855631.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:51.905Z,1478855631.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:52.283Z,1478855632.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:52.334Z,1478855632.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:52.678Z,1478855632.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:52.693Z,1478855632.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:53.086Z,1478855633.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:53.105Z,1478855633.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:53.489Z,1478855633.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:53.509Z,1478855633.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:53.869Z,1478855633.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:53.905Z,1478855633.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:54.285Z,1478855634.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:54.313Z,1478855634.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:54.677Z,1478855634.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:54.745Z,1478855634.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:55.069Z,1478855635.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:55.106Z,1478855635.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:55.469Z,1478855635.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:55.505Z,1478855635.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:55.869Z,1478855635.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:55.905Z,1478855635.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:56.269Z,1478855636.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:56.329Z,1478855636.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:56.669Z,1478855636.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:56.689Z,1478855636.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:57.069Z,1478855637.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:57.121Z,1478855637.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:57.483Z,1478855637.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:57.518Z,1478855637.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:57.886Z,1478855637.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:57.941Z,1478855637.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:58.282Z,1478855638.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:58.329Z,1478855638.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:58.677Z,1478855638.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:58.697Z,1478855638.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:59.069Z,1478855639.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:59.101Z,1478855639.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:59.469Z,1478855639.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:59.513Z,1478855639.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:13:59.869Z,1478855639.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:13:59.913Z,1478855639.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:00.277Z,1478855640.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:00.309Z,1478855640.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:00.673Z,1478855640.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:00.713Z,1478855640.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:01.069Z,1478855641.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:01.084Z,1478855641.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:01.477Z,1478855641.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:01.497Z,1478855641.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:01.875Z,1478855641.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:01.897Z,1478855641.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:02.277Z,1478855642.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:02.296Z,1478855642.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:02.673Z,1478855642.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:02.695Z,1478855642.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:03.077Z,1478855643.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:03.097Z,1478855643.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:03.469Z,1478855643.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:03.504Z,1478855643.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:03.885Z,1478855643.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:03.905Z,1478855643.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:04.277Z,1478855644.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:04.305Z,1478855644.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:04.669Z,1478855644.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:04.689Z,1478855644.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:05.073Z,1478855645.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:05.093Z,1478855645.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:05.477Z,1478855645.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:05.497Z,1478855645.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:05.876Z,1478855645.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:05.897Z,1478855645.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:06.292Z,1478855646.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:06.307Z,1478855646.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:06.686Z,1478855646.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:06.701Z,1478855646.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:07.077Z,1478855647.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:07.097Z,1478855647.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:07.477Z,1478855647.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:07.500Z,1478855647.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:07.882Z,1478855647.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:07.919Z,1478855647.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:11.427Z,1478855651.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:11.517Z,1478855651.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:11.622Z,1478855651.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:11.672Z,1478855651.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:11.981Z,1478855651.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:12.016Z,1478855652.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:12.381Z,1478855652.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:12.422Z,1478855652.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:12.781Z,1478855652.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:12.813Z,1478855652.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:13.181Z,1478855653.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:13.234Z,1478855653.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:13.586Z,1478855653.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:13.641Z,1478855653.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:13.981Z,1478855653.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:14.017Z,1478855654.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:14.389Z,1478855654.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:14.415Z,1478855654.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:14.804Z,1478855654.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:14.831Z,1478855654.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:15.192Z,1478855655.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:15.227Z,1478855655.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:15.581Z,1478855655.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:15.624Z,1478855655.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:15.990Z,1478855655.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:16.042Z,1478855656.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:16.386Z,1478855656.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:16.402Z,1478855656.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:16.781Z,1478855656.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:16.809Z,1478855656.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:17.196Z,1478855657.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:17.224Z,1478855657.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:17.230Z,1478855657.230 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:17.231Z,1478855657.231 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 69
2016-11-11T09:14:17.231Z,1478855657.231 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:14:17.242Z,1478855657.242 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:17.242Z,1478855657.242 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 69
2016-11-11T09:14:17.242Z,1478855657.242 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:14:17.267Z,1478855657.267 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:14:17.268Z,1478855657.268 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:14:17.581Z,1478855657.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:17.613Z,1478855657.613 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:17.613Z,1478855657.613 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2016-11-11T09:14:17.613Z,1478855657.613 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:14:17.633Z,1478855657.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:14:17.633Z,1478855657.633 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:14:17.633Z,1478855657.633 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 69
2016-11-11T09:14:17.633Z,1478855657.634 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:14:17.634Z,1478855657.634 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 69
2016-11-11T09:14:17.997Z,1478855657.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:18.030Z,1478855658.030 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:14:18.031Z,1478855658.030 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:14:18.031Z,1478855658.031 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:14:18.031Z,1478855658.031 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:14:18.032Z,1478855658.032 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:14:18.032Z,1478855658.032 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:14:18.074Z,1478855658.074 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:14:18.074Z,1478855658.074 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2016-11-11T09:14:18.390Z,1478855658.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:18.424Z,1478855658.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:14:18.424Z,1478855658.424 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:14:18.425Z,1478855658.425 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:14:18.778Z,1478855658.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:18.817Z,1478855658.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:19.184Z,1478855659.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:19.226Z,1478855659.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:19.612Z,1478855659.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:19.652Z,1478855659.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:19.987Z,1478855659.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:20.002Z,1478855660.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:20.385Z,1478855660.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:20.405Z,1478855660.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:20.789Z,1478855660.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:20.809Z,1478855660.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:21.187Z,1478855661.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:21.203Z,1478855661.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:21.610Z,1478855661.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:21.649Z,1478855661.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:21.984Z,1478855661.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:22.017Z,1478855662.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:22.385Z,1478855662.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:22.406Z,1478855662.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:22.793Z,1478855662.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:22.807Z,1478855662.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:23.203Z,1478855663.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:23.225Z,1478855663.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:23.613Z,1478855663.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:23.649Z,1478855663.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:23.981Z,1478855663.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:24.013Z,1478855664.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:24.381Z,1478855664.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:24.437Z,1478855664.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:24.781Z,1478855664.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:24.817Z,1478855664.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:25.181Z,1478855665.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:25.217Z,1478855665.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:25.604Z,1478855665.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:25.674Z,1478855665.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:25.981Z,1478855665.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:26.018Z,1478855666.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:26.389Z,1478855666.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:26.417Z,1478855666.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:26.798Z,1478855666.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:26.849Z,1478855666.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:27.189Z,1478855667.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:27.209Z,1478855667.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:27.608Z,1478855667.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:27.681Z,1478855667.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:27.996Z,1478855667.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:28.011Z,1478855668.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:28.384Z,1478855668.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:28.433Z,1478855668.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:28.788Z,1478855668.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:28.803Z,1478855668.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:29.184Z,1478855669.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:29.217Z,1478855669.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:29.589Z,1478855669.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:29.604Z,1478855669.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:29.991Z,1478855669.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:30.017Z,1478855670.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:30.400Z,1478855670.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:30.415Z,1478855670.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:30.781Z,1478855670.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:30.813Z,1478855670.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:31.181Z,1478855671.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:31.217Z,1478855671.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:31.582Z,1478855671.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:31.609Z,1478855671.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:31.982Z,1478855671.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:32.008Z,1478855672.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:32.390Z,1478855672.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:32.413Z,1478855672.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:32.786Z,1478855672.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:32.802Z,1478855672.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:33.182Z,1478855673.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:33.202Z,1478855673.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:33.610Z,1478855673.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:33.650Z,1478855673.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:33.982Z,1478855673.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:34.017Z,1478855674.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:34.381Z,1478855674.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:34.414Z,1478855674.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:34.781Z,1478855674.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:34.819Z,1478855674.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:35.181Z,1478855675.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:35.220Z,1478855675.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:35.591Z,1478855675.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:35.632Z,1478855675.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:35.985Z,1478855675.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:36.017Z,1478855676.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:36.396Z,1478855676.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:36.433Z,1478855676.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:36.781Z,1478855676.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:36.817Z,1478855676.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:37.186Z,1478855677.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:37.202Z,1478855677.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:37.593Z,1478855677.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:37.608Z,1478855677.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:37.988Z,1478855677.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:38.003Z,1478855678.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:38.385Z,1478855678.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:38.405Z,1478855678.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:38.843Z,1478855678.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:38.921Z,1478855678.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:39.189Z,1478855679.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:39.209Z,1478855679.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:39.603Z,1478855679.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:39.649Z,1478855679.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:39.985Z,1478855679.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:40.013Z,1478855680.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:40.384Z,1478855680.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:40.441Z,1478855680.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:40.789Z,1478855680.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:40.809Z,1478855680.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:41.181Z,1478855681.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:41.216Z,1478855681.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:41.611Z,1478855681.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:41.705Z,1478855681.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:41.981Z,1478855681.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:42.013Z,1478855682.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:42.382Z,1478855682.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:42.438Z,1478855682.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:42.782Z,1478855682.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:42.833Z,1478855682.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:43.181Z,1478855683.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:43.217Z,1478855683.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:43.581Z,1478855683.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:43.618Z,1478855683.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:43.982Z,1478855683.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:44.010Z,1478855684.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:44.381Z,1478855684.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:44.417Z,1478855684.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:44.788Z,1478855684.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:44.803Z,1478855684.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:45.186Z,1478855685.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:45.217Z,1478855685.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:45.585Z,1478855685.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:45.606Z,1478855685.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:45.998Z,1478855685.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:46.013Z,1478855686.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:46.397Z,1478855686.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:46.413Z,1478855686.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:46.781Z,1478855686.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:46.806Z,1478855686.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:47.181Z,1478855687.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:47.217Z,1478855687.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:47.586Z,1478855687.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:47.620Z,1478855687.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:47.981Z,1478855687.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:48.014Z,1478855688.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:48.381Z,1478855688.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:48.441Z,1478855688.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:48.781Z,1478855688.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:48.821Z,1478855688.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:49.181Z,1478855689.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:49.201Z,1478855689.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:49.585Z,1478855689.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:49.601Z,1478855689.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:49.986Z,1478855689.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:50.010Z,1478855690.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:50.366Z,1478855690.366 [NAL9602](INFO): SBD MO Status=2, MOMSN=341, MT Status=2, MTMSN=0
2016-11-11T09:14:50.366Z,1478855690.366 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T09:14:50.383Z,1478855690.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:50.398Z,1478855690.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:50.796Z,1478855690.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:50.811Z,1478855690.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:51.184Z,1478855691.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:51.208Z,1478855691.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:51.592Z,1478855691.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:51.614Z,1478855691.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:51.985Z,1478855691.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:52.013Z,1478855692.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:52.393Z,1478855692.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:52.409Z,1478855692.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:52.796Z,1478855692.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:52.812Z,1478855692.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:53.196Z,1478855693.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:53.211Z,1478855693.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:53.591Z,1478855693.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:53.613Z,1478855693.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:54.000Z,1478855694.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:54.033Z,1478855694.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:54.381Z,1478855694.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:54.418Z,1478855694.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:54.808Z,1478855694.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:54.865Z,1478855694.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:55.192Z,1478855695.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:55.221Z,1478855695.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:55.624Z,1478855695.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:55.651Z,1478855695.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:55.992Z,1478855695.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:56.041Z,1478855696.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:56.389Z,1478855696.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:56.409Z,1478855696.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:56.789Z,1478855696.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:56.839Z,1478855696.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:57.184Z,1478855697.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:57.231Z,1478855697.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:57.591Z,1478855697.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:57.609Z,1478855697.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:58.005Z,1478855698.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:58.020Z,1478855698.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:58.384Z,1478855698.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:58.416Z,1478855698.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:58.800Z,1478855698.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:58.822Z,1478855698.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:59.181Z,1478855699.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:59.209Z,1478855699.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:14:59.607Z,1478855699.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:14:59.623Z,1478855699.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:00.014Z,1478855700.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:00.033Z,1478855700.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:00.381Z,1478855700.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:00.418Z,1478855700.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:00.781Z,1478855700.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:00.817Z,1478855700.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:01.181Z,1478855701.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:01.221Z,1478855701.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:01.582Z,1478855701.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:01.597Z,1478855701.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:01.997Z,1478855701.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:02.024Z,1478855702.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:02.393Z,1478855702.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:02.413Z,1478855702.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:02.789Z,1478855702.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:02.804Z,1478855702.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:03.192Z,1478855703.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:03.208Z,1478855703.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:03.598Z,1478855703.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:03.613Z,1478855703.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:04.009Z,1478855704.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:04.032Z,1478855704.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:04.403Z,1478855704.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:04.419Z,1478855704.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:04.796Z,1478855704.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:04.822Z,1478855704.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:05.181Z,1478855705.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:05.213Z,1478855705.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:05.581Z,1478855705.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:05.607Z,1478855705.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:05.997Z,1478855705.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:06.033Z,1478855706.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:06.382Z,1478855706.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:06.414Z,1478855706.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:06.781Z,1478855706.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:06.817Z,1478855706.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:07.181Z,1478855707.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:07.218Z,1478855707.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:07.582Z,1478855707.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:07.609Z,1478855707.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:07.981Z,1478855707.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:08.029Z,1478855708.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:11.336Z,1478855711.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:11.438Z,1478855711.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:11.533Z,1478855711.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:11.561Z,1478855711.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:11.970Z,1478855711.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:11.985Z,1478855711.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:12.348Z,1478855712.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:12.390Z,1478855712.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:12.725Z,1478855712.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:12.746Z,1478855712.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:13.124Z,1478855713.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:13.175Z,1478855713.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:13.530Z,1478855713.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:13.582Z,1478855713.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:13.939Z,1478855713.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:13.972Z,1478855713.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:14.322Z,1478855714.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:14.354Z,1478855714.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:14.721Z,1478855714.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:14.754Z,1478855714.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:15.122Z,1478855715.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:15.164Z,1478855715.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:15.533Z,1478855715.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:15.574Z,1478855715.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:15.928Z,1478855715.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:15.956Z,1478855715.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:16.336Z,1478855716.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:16.360Z,1478855716.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:16.749Z,1478855716.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:16.765Z,1478855716.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:17.135Z,1478855717.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:17.173Z,1478855717.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:17.543Z,1478855717.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:17.579Z,1478855717.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:17.930Z,1478855717.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:17.953Z,1478855717.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:18.330Z,1478855718.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:18.349Z,1478855718.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:18.729Z,1478855718.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:18.745Z,1478855718.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:19.138Z,1478855719.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:19.154Z,1478855719.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:19.541Z,1478855719.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:19.565Z,1478855719.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:19.936Z,1478855719.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:19.964Z,1478855719.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:20.322Z,1478855720.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:20.348Z,1478855720.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:20.725Z,1478855720.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:20.752Z,1478855720.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:21.122Z,1478855721.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:21.157Z,1478855721.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:21.545Z,1478855721.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:21.573Z,1478855721.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:21.944Z,1478855721.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:21.973Z,1478855721.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:22.340Z,1478855722.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:22.371Z,1478855722.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:22.743Z,1478855722.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:22.759Z,1478855722.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:23.130Z,1478855723.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:23.161Z,1478855723.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:23.538Z,1478855723.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:23.594Z,1478855723.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:23.934Z,1478855723.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:23.953Z,1478855723.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:24.328Z,1478855724.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:24.354Z,1478855724.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:24.729Z,1478855724.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:24.751Z,1478855724.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:25.124Z,1478855725.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:25.161Z,1478855725.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:25.521Z,1478855725.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:25.566Z,1478855725.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:25.948Z,1478855725.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:25.964Z,1478855725.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:26.326Z,1478855726.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:26.377Z,1478855726.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:26.748Z,1478855726.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:26.763Z,1478855726.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:27.132Z,1478855727.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:27.198Z,1478855727.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:27.540Z,1478855727.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:27.571Z,1478855727.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:27.956Z,1478855727.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:27.999Z,1478855727.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:28.322Z,1478855728.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:28.369Z,1478855728.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:28.721Z,1478855728.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:28.757Z,1478855728.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:29.122Z,1478855729.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:29.159Z,1478855729.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:29.526Z,1478855729.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:29.565Z,1478855729.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:29.937Z,1478855729.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:29.964Z,1478855729.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:30.330Z,1478855730.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:30.353Z,1478855730.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:30.722Z,1478855730.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:30.747Z,1478855730.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:31.133Z,1478855731.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:31.153Z,1478855731.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:31.532Z,1478855731.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:31.569Z,1478855731.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:31.952Z,1478855731.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:31.975Z,1478855731.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:32.349Z,1478855732.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:32.369Z,1478855732.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:32.743Z,1478855732.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:32.770Z,1478855732.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:33.132Z,1478855733.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:33.163Z,1478855733.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:33.528Z,1478855733.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:33.549Z,1478855733.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:33.930Z,1478855733.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:33.961Z,1478855733.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:34.324Z,1478855734.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:34.352Z,1478855734.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:34.732Z,1478855734.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:34.748Z,1478855734.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:35.122Z,1478855735.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:35.157Z,1478855735.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:35.536Z,1478855735.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:35.570Z,1478855735.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:35.922Z,1478855735.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:35.958Z,1478855735.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:36.326Z,1478855736.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:36.352Z,1478855736.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:36.722Z,1478855736.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:36.758Z,1478855736.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:37.140Z,1478855737.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:37.164Z,1478855737.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:37.550Z,1478855737.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:37.594Z,1478855737.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:37.921Z,1478855737.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:37.941Z,1478855737.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:38.326Z,1478855738.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:38.357Z,1478855738.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:38.725Z,1478855738.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:38.747Z,1478855738.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:39.124Z,1478855739.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:39.152Z,1478855739.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:39.542Z,1478855739.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:39.561Z,1478855739.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:39.939Z,1478855739.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:39.954Z,1478855739.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:40.346Z,1478855740.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:40.421Z,1478855740.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:40.747Z,1478855740.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:40.762Z,1478855740.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:41.121Z,1478855741.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:41.162Z,1478855741.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:41.521Z,1478855741.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:41.553Z,1478855741.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:41.929Z,1478855741.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:42.000Z,1478855742.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:42.321Z,1478855742.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:42.358Z,1478855742.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:42.722Z,1478855742.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:42.763Z,1478855742.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:43.122Z,1478855743.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:43.149Z,1478855743.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:43.522Z,1478855743.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:43.537Z,1478855743.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:43.935Z,1478855743.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:43.967Z,1478855743.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:44.329Z,1478855744.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:44.344Z,1478855744.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:44.736Z,1478855744.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:44.757Z,1478855744.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:45.133Z,1478855745.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:45.148Z,1478855745.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:45.534Z,1478855745.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:45.557Z,1478855745.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:45.932Z,1478855745.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:45.957Z,1478855745.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:46.324Z,1478855746.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:46.361Z,1478855746.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:46.721Z,1478855746.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:46.746Z,1478855746.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:47.121Z,1478855747.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:47.157Z,1478855747.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:47.521Z,1478855747.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:47.547Z,1478855747.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:47.941Z,1478855747.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:47.970Z,1478855747.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:48.321Z,1478855748.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:48.358Z,1478855748.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:48.721Z,1478855748.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:48.753Z,1478855748.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:49.121Z,1478855749.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:49.163Z,1478855749.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:49.552Z,1478855749.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:49.573Z,1478855749.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:49.940Z,1478855749.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:49.969Z,1478855749.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:50.329Z,1478855750.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:50.365Z,1478855750.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:50.726Z,1478855750.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:50.769Z,1478855750.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:51.125Z,1478855751.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:51.165Z,1478855751.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:51.532Z,1478855751.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:51.573Z,1478855751.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:51.926Z,1478855751.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:51.954Z,1478855751.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:52.336Z,1478855752.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:52.363Z,1478855752.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:52.740Z,1478855752.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:52.775Z,1478855752.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:52.794Z,1478855752.795 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T09:15:53.133Z,1478855753.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:53.148Z,1478855753.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:53.525Z,1478855753.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:53.548Z,1478855753.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:53.928Z,1478855753.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:53.944Z,1478855753.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:54.329Z,1478855754.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:54.401Z,1478855754.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:54.721Z,1478855754.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:54.781Z,1478855754.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:55.121Z,1478855755.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:55.152Z,1478855755.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:55.521Z,1478855755.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:55.573Z,1478855755.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:55.929Z,1478855755.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:55.955Z,1478855755.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:56.325Z,1478855756.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:56.396Z,1478855756.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:56.721Z,1478855756.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:56.763Z,1478855756.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:57.121Z,1478855757.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:57.153Z,1478855757.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:57.521Z,1478855757.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:57.557Z,1478855757.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:57.930Z,1478855757.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:57.961Z,1478855757.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:58.321Z,1478855758.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:58.357Z,1478855758.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:58.721Z,1478855758.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:58.757Z,1478855758.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:59.121Z,1478855759.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:59.157Z,1478855759.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:59.521Z,1478855759.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:59.557Z,1478855759.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:15:59.925Z,1478855759.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:15:59.957Z,1478855759.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:00.321Z,1478855760.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:00.365Z,1478855760.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:00.721Z,1478855760.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:00.757Z,1478855760.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:01.139Z,1478855761.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:01.169Z,1478855761.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:01.536Z,1478855761.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:01.568Z,1478855761.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:01.926Z,1478855761.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:01.945Z,1478855761.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:02.329Z,1478855762.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:02.349Z,1478855762.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:02.732Z,1478855762.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:02.747Z,1478855762.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:03.128Z,1478855763.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:03.144Z,1478855763.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:03.536Z,1478855763.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:03.551Z,1478855763.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:03.924Z,1478855763.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:03.955Z,1478855763.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:04.329Z,1478855764.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:04.353Z,1478855764.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:04.721Z,1478855764.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:04.746Z,1478855764.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:05.148Z,1478855765.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:05.164Z,1478855765.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:05.557Z,1478855765.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:05.577Z,1478855765.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:05.922Z,1478855765.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:05.950Z,1478855765.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:06.326Z,1478855766.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:06.342Z,1478855766.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:06.715Z,1478855766.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:06.726Z,1478855766.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:06.742Z,1478855766.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:07.128Z,1478855767.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:07.144Z,1478855767.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:07.181Z,1478855767.181 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T09:11:06.9Z
2016-11-11T09:16:07.181Z,1478855767.181 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T09:16:07.181Z,1478855767.181 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T09:16:07.508Z,1478855767.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:07.533Z,1478855767.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:07.548Z,1478855767.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:08.428Z,1478855768.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:08.485Z,1478855768.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:08.590Z,1478855768.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:08.629Z,1478855768.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:12.284Z,1478855772.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:12.341Z,1478855772.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:12.403Z,1478855772.404 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0104.lzma
2016-11-11T09:16:12.440Z,1478855772.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:12.489Z,1478855772.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:12.840Z,1478855772.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:12.861Z,1478855772.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:13.197Z,1478855773.197 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0104.lzma.bak
2016-11-11T09:16:13.197Z,1478855773.197 [DataOverHttps](INFO): SBD MOMSN=4555269
2016-11-11T09:16:13.245Z,1478855773.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:13.291Z,1478855773.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:14.484Z,1478855774.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:14.520Z,1478855774.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:14.622Z,1478855774.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:14.673Z,1478855774.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:18.100Z,1478855778.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:18.150Z,1478855778.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:18.260Z,1478855778.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:18.284Z,1478855778.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:18.652Z,1478855778.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:18.689Z,1478855778.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:19.044Z,1478855779.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:19.059Z,1478855779.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:19.435Z,1478855779.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:19.484Z,1478855779.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:19.842Z,1478855779.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:19.857Z,1478855779.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:20.748Z,1478855780.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:21.544Z,1478855781.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:23.404Z,1478855783.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:23.446Z,1478855783.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:23.508Z,1478855783.508 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0105.lzma
2016-11-11T09:16:23.556Z,1478855783.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:23.589Z,1478855783.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:23.958Z,1478855783.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:23.977Z,1478855783.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:24.309Z,1478855784.309 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0105.lzma.bak
2016-11-11T09:16:24.309Z,1478855784.309 [DataOverHttps](INFO): SBD MOMSN=4555271
2016-11-11T09:16:24.370Z,1478855784.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:24.385Z,1478855784.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:25.768Z,1478855785.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:25.784Z,1478855785.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:25.793Z,1478855785.793 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T09:16:25.793Z,1478855785.793 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T09:16:25.793Z,1478855785.793 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T09:16:25.894Z,1478855785.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:25.933Z,1478855785.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:29.377Z,1478855789.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:29.405Z,1478855789.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:29.536Z,1478855789.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:29.565Z,1478855789.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:29.937Z,1478855789.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:29.997Z,1478855789.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:30.331Z,1478855790.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:30.378Z,1478855790.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:30.717Z,1478855790.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:30.737Z,1478855790.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:31.117Z,1478855791.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:31.168Z,1478855791.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:31.524Z,1478855791.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:31.549Z,1478855791.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:31.920Z,1478855791.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:31.969Z,1478855791.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:32.324Z,1478855792.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:32.339Z,1478855792.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:32.726Z,1478855792.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:32.779Z,1478855792.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:33.124Z,1478855793.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:33.140Z,1478855793.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:33.532Z,1478855793.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:33.552Z,1478855793.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:33.926Z,1478855793.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:33.945Z,1478855793.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:34.339Z,1478855794.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:34.354Z,1478855794.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:34.688Z,1478855794.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:34.738Z,1478855794.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:34.753Z,1478855794.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:35.141Z,1478855795.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:35.161Z,1478855795.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:35.484Z,1478855795.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:35.532Z,1478855795.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:35.564Z,1478855795.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:35.925Z,1478855795.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:35.951Z,1478855795.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:36.317Z,1478855796.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:36.350Z,1478855796.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:36.718Z,1478855796.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:36.757Z,1478855796.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:37.125Z,1478855797.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:37.150Z,1478855797.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:37.517Z,1478855797.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:37.554Z,1478855797.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:37.918Z,1478855797.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:37.945Z,1478855797.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:38.317Z,1478855798.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:38.337Z,1478855798.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:38.724Z,1478855798.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:38.739Z,1478855798.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:39.125Z,1478855799.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:39.145Z,1478855799.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:39.539Z,1478855799.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:39.554Z,1478855799.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:39.936Z,1478855799.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:39.951Z,1478855799.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:40.344Z,1478855800.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:40.359Z,1478855800.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:40.738Z,1478855800.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:40.757Z,1478855800.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:41.118Z,1478855801.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:41.149Z,1478855801.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:41.525Z,1478855801.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:41.557Z,1478855801.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:41.916Z,1478855801.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:41.953Z,1478855801.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:42.301Z,1478855802.301 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T09:16:42.317Z,1478855802.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:42.357Z,1478855802.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:42.717Z,1478855802.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:42.757Z,1478855802.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:43.117Z,1478855803.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:43.132Z,1478855803.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:43.517Z,1478855803.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:43.537Z,1478855803.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:43.925Z,1478855803.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:43.940Z,1478855803.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:44.324Z,1478855804.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:44.339Z,1478855804.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:44.720Z,1478855804.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:44.773Z,1478855804.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:45.128Z,1478855805.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:45.185Z,1478855805.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:45.529Z,1478855805.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:45.550Z,1478855805.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:45.917Z,1478855805.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:45.966Z,1478855805.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:46.317Z,1478855806.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:46.349Z,1478855806.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:46.717Z,1478855806.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:46.773Z,1478855806.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:47.117Z,1478855807.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:47.166Z,1478855807.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:47.525Z,1478855807.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:47.550Z,1478855807.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:47.905Z,1478855807.905 [NAL9602](INFO): Powering down
2016-11-11T09:16:47.924Z,1478855807.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:47.965Z,1478855807.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:48.317Z,1478855808.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:48.352Z,1478855808.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:48.721Z,1478855808.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:48.753Z,1478855808.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:49.117Z,1478855809.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:49.161Z,1478855809.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:49.517Z,1478855809.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:49.553Z,1478855809.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:49.933Z,1478855809.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:49.963Z,1478855809.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:50.317Z,1478855810.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:50.345Z,1478855810.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:50.728Z,1478855810.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:50.743Z,1478855810.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:51.128Z,1478855811.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:51.143Z,1478855811.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:51.525Z,1478855811.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:51.545Z,1478855811.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:51.923Z,1478855811.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:51.945Z,1478855811.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:52.320Z,1478855812.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:52.343Z,1478855812.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:52.736Z,1478855812.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:52.764Z,1478855812.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:53.117Z,1478855813.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:53.156Z,1478855813.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:53.525Z,1478855813.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:53.557Z,1478855813.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:53.921Z,1478855813.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:53.953Z,1478855813.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:54.317Z,1478855814.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:54.353Z,1478855814.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:54.721Z,1478855814.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:54.753Z,1478855814.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:55.117Z,1478855815.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:55.153Z,1478855815.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:55.525Z,1478855815.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:55.550Z,1478855815.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:55.917Z,1478855815.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:55.953Z,1478855815.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:56.317Z,1478855816.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:56.354Z,1478855816.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:56.717Z,1478855816.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:56.754Z,1478855816.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:57.117Z,1478855817.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:57.154Z,1478855817.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:57.517Z,1478855817.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:57.553Z,1478855817.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:57.917Z,1478855817.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:57.954Z,1478855817.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:58.318Z,1478855818.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:58.346Z,1478855818.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:58.718Z,1478855818.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:58.757Z,1478855818.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:59.118Z,1478855819.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:59.177Z,1478855819.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:59.530Z,1478855819.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:59.577Z,1478855819.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:16:59.925Z,1478855819.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:16:59.940Z,1478855819.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:00.323Z,1478855820.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:00.381Z,1478855820.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:00.723Z,1478855820.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:00.739Z,1478855820.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:01.124Z,1478855821.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:01.174Z,1478855821.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:01.529Z,1478855821.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:01.585Z,1478855821.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:01.924Z,1478855821.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:01.939Z,1478855821.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:02.323Z,1478855822.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:02.351Z,1478855822.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:02.724Z,1478855822.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:02.745Z,1478855822.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:03.117Z,1478855823.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:03.149Z,1478855823.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:03.517Z,1478855823.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:03.549Z,1478855823.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:03.917Z,1478855823.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:03.946Z,1478855823.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:04.317Z,1478855824.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:04.349Z,1478855824.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:04.717Z,1478855824.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:04.750Z,1478855824.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:05.117Z,1478855825.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:05.149Z,1478855825.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:05.517Z,1478855825.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:05.549Z,1478855825.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:05.932Z,1478855825.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:05.953Z,1478855825.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:06.317Z,1478855826.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:06.349Z,1478855826.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:06.717Z,1478855826.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:06.748Z,1478855826.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:07.117Z,1478855827.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:07.153Z,1478855827.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:07.517Z,1478855827.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:07.557Z,1478855827.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:07.917Z,1478855827.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:07.953Z,1478855827.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:08.318Z,1478855828.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:08.356Z,1478855828.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:08.717Z,1478855828.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:08.761Z,1478855828.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:09.123Z,1478855829.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:09.193Z,1478855829.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:09.529Z,1478855829.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:09.544Z,1478855829.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:09.923Z,1478855829.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:09.945Z,1478855829.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:10.323Z,1478855830.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:10.343Z,1478855830.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:10.720Z,1478855830.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:10.743Z,1478855830.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:11.123Z,1478855831.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:11.145Z,1478855831.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:11.533Z,1478855831.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:11.548Z,1478855831.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:11.925Z,1478855831.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:11.945Z,1478855831.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:12.332Z,1478855832.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:12.347Z,1478855832.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:12.732Z,1478855832.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:12.747Z,1478855832.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:13.128Z,1478855833.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:13.145Z,1478855833.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:13.580Z,1478855833.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:13.614Z,1478855833.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:13.917Z,1478855833.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:13.977Z,1478855833.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:14.317Z,1478855834.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:14.352Z,1478855834.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:14.717Z,1478855834.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:14.762Z,1478855834.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:15.117Z,1478855835.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:15.144Z,1478855835.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:15.525Z,1478855835.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:15.577Z,1478855835.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:15.920Z,1478855835.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:15.963Z,1478855835.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:16.322Z,1478855836.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:16.338Z,1478855836.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:16.721Z,1478855836.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:16.741Z,1478855836.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:17.125Z,1478855837.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:17.140Z,1478855837.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:17.523Z,1478855837.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:17.538Z,1478855837.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:17.929Z,1478855837.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:17.949Z,1478855837.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:18.320Z,1478855838.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:18.343Z,1478855838.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:18.349Z,1478855838.349 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:18.349Z,1478855838.349 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 70
2016-11-11T09:17:18.349Z,1478855838.349 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:17:18.351Z,1478855838.351 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:18.351Z,1478855838.351 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 70
2016-11-11T09:17:18.351Z,1478855838.351 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:17:18.374Z,1478855838.374 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:17:18.374Z,1478855838.374 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:17:18.724Z,1478855838.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:18.781Z,1478855838.781 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:18.781Z,1478855838.781 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2016-11-11T09:17:18.781Z,1478855838.781 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:17:18.860Z,1478855838.860 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:17:18.860Z,1478855838.860 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:17:18.860Z,1478855838.860 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 70
2016-11-11T09:17:18.861Z,1478855838.861 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:17:18.861Z,1478855838.861 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 70
2016-11-11T09:17:19.125Z,1478855839.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:19.167Z,1478855839.167 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:17:19.167Z,1478855839.167 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:17:19.167Z,1478855839.167 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:17:19.168Z,1478855839.168 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:17:19.169Z,1478855839.168 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:17:19.169Z,1478855839.169 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:17:19.182Z,1478855839.182 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:17:19.182Z,1478855839.182 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2016-11-11T09:17:19.517Z,1478855839.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:19.530Z,1478855839.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:17:19.531Z,1478855839.531 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:17:19.531Z,1478855839.531 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:17:19.917Z,1478855839.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:19.937Z,1478855839.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:20.325Z,1478855840.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:20.340Z,1478855840.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:20.720Z,1478855840.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:20.735Z,1478855840.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:21.124Z,1478855841.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:21.139Z,1478855841.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:21.527Z,1478855841.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:21.557Z,1478855841.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:21.925Z,1478855841.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:21.945Z,1478855841.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:22.325Z,1478855842.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:22.440Z,1478855842.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:22.728Z,1478855842.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:22.749Z,1478855842.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:23.117Z,1478855843.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:23.145Z,1478855843.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:23.517Z,1478855843.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:23.541Z,1478855843.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:23.917Z,1478855843.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:23.945Z,1478855843.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:24.318Z,1478855844.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:24.355Z,1478855844.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:24.717Z,1478855844.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:24.749Z,1478855844.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:25.117Z,1478855845.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:25.145Z,1478855845.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:25.517Z,1478855845.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:25.537Z,1478855845.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:25.929Z,1478855845.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:25.957Z,1478855845.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:26.318Z,1478855846.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:26.342Z,1478855846.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:30.030Z,1478855850.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:30.110Z,1478855850.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:30.225Z,1478855850.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:30.261Z,1478855850.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:30.581Z,1478855850.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:30.637Z,1478855850.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:30.981Z,1478855850.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:31.024Z,1478855851.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:31.381Z,1478855851.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:31.426Z,1478855851.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:31.815Z,1478855851.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:31.865Z,1478855851.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:32.182Z,1478855852.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:32.221Z,1478855852.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:32.581Z,1478855852.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:32.610Z,1478855852.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:32.985Z,1478855852.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:33.025Z,1478855853.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:33.388Z,1478855853.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:33.428Z,1478855853.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:33.794Z,1478855853.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:33.820Z,1478855853.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:34.184Z,1478855854.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:34.213Z,1478855854.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:34.588Z,1478855854.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:34.611Z,1478855854.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:34.993Z,1478855854.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:35.094Z,1478855855.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:35.387Z,1478855855.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:35.412Z,1478855855.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:35.784Z,1478855855.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:35.810Z,1478855855.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:36.188Z,1478855856.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:36.203Z,1478855856.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:36.589Z,1478855856.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:36.611Z,1478855856.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:36.988Z,1478855856.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:37.003Z,1478855857.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:37.396Z,1478855857.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:37.414Z,1478855857.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:37.781Z,1478855857.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:37.817Z,1478855857.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:38.181Z,1478855858.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:38.217Z,1478855858.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:38.581Z,1478855858.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:38.615Z,1478855858.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:38.981Z,1478855858.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:39.019Z,1478855859.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:39.396Z,1478855859.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:39.414Z,1478855859.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:39.781Z,1478855859.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:39.816Z,1478855859.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:40.181Z,1478855860.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:40.215Z,1478855860.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:40.581Z,1478855860.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:40.619Z,1478855860.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:40.981Z,1478855860.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:41.053Z,1478855861.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:41.389Z,1478855861.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:41.437Z,1478855861.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:41.781Z,1478855861.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:41.822Z,1478855861.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:42.181Z,1478855862.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:42.222Z,1478855862.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:42.581Z,1478855862.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:42.625Z,1478855862.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:42.981Z,1478855862.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:43.019Z,1478855863.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:43.387Z,1478855863.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:43.437Z,1478855863.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:43.781Z,1478855863.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:43.865Z,1478855863.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:44.181Z,1478855864.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:44.220Z,1478855864.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:44.592Z,1478855864.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:44.660Z,1478855864.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:44.981Z,1478855864.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:45.017Z,1478855865.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:45.381Z,1478855865.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:45.443Z,1478855865.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:45.799Z,1478855865.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:45.828Z,1478855865.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:46.181Z,1478855866.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:46.249Z,1478855866.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:46.581Z,1478855866.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:46.625Z,1478855866.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:46.985Z,1478855866.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:47.021Z,1478855867.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:47.381Z,1478855867.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:47.430Z,1478855867.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:47.786Z,1478855867.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:47.820Z,1478855867.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:48.186Z,1478855868.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:48.218Z,1478855868.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:48.588Z,1478855868.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:48.605Z,1478855868.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:48.991Z,1478855868.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:49.019Z,1478855869.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:49.382Z,1478855869.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:49.430Z,1478855869.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:49.783Z,1478855869.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:49.799Z,1478855869.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:50.187Z,1478855870.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:50.247Z,1478855870.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:50.590Z,1478855870.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:50.640Z,1478855870.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:50.983Z,1478855870.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:51.029Z,1478855871.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:51.383Z,1478855871.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:51.425Z,1478855871.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:51.784Z,1478855871.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:51.838Z,1478855871.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:52.186Z,1478855872.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:52.201Z,1478855872.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:52.589Z,1478855872.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:52.611Z,1478855872.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:52.991Z,1478855872.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:53.023Z,1478855873.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:53.383Z,1478855873.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:53.421Z,1478855873.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:53.783Z,1478855873.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:53.837Z,1478855873.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:54.187Z,1478855874.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:54.238Z,1478855874.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:54.594Z,1478855874.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:54.618Z,1478855874.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:54.983Z,1478855874.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:55.032Z,1478855875.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:55.383Z,1478855875.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:55.435Z,1478855875.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:55.781Z,1478855875.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:55.814Z,1478855875.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:56.190Z,1478855876.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:56.235Z,1478855876.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:56.591Z,1478855876.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:56.606Z,1478855876.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:56.992Z,1478855876.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:57.013Z,1478855877.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:57.400Z,1478855877.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:57.472Z,1478855877.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:57.794Z,1478855877.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:57.834Z,1478855877.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:58.188Z,1478855878.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:58.242Z,1478855878.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:58.583Z,1478855878.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:58.619Z,1478855878.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:58.985Z,1478855878.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:59.050Z,1478855879.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:59.382Z,1478855879.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:59.425Z,1478855879.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:17:59.781Z,1478855879.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:17:59.834Z,1478855879.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:00.181Z,1478855880.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:00.229Z,1478855880.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:00.601Z,1478855880.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:00.637Z,1478855880.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:00.981Z,1478855880.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:01.030Z,1478855881.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:01.388Z,1478855881.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:01.403Z,1478855881.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:01.798Z,1478855881.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:01.814Z,1478855881.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:02.182Z,1478855882.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:02.227Z,1478855882.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:02.584Z,1478855882.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:02.627Z,1478855882.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:02.981Z,1478855882.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:03.062Z,1478855883.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:03.386Z,1478855883.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:03.401Z,1478855883.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:03.789Z,1478855883.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:03.811Z,1478855883.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:04.191Z,1478855884.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:04.213Z,1478855884.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:04.588Z,1478855884.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:04.604Z,1478855884.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:04.989Z,1478855884.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:05.005Z,1478855885.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:05.389Z,1478855885.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:05.417Z,1478855885.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:05.781Z,1478855885.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:05.822Z,1478855885.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:06.181Z,1478855886.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:06.210Z,1478855886.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:06.609Z,1478855886.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:06.626Z,1478855886.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:07.009Z,1478855887.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:07.038Z,1478855887.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:07.393Z,1478855887.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:07.441Z,1478855887.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:07.785Z,1478855887.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:07.805Z,1478855887.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:08.188Z,1478855888.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:08.204Z,1478855888.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:08.588Z,1478855888.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:08.633Z,1478855888.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:08.987Z,1478855888.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:09.021Z,1478855889.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:09.389Z,1478855889.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:09.421Z,1478855889.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:09.781Z,1478855889.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:09.821Z,1478855889.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:10.185Z,1478855890.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:10.231Z,1478855890.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:10.598Z,1478855890.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:10.632Z,1478855890.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:10.981Z,1478855890.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:10.997Z,1478855890.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:11.395Z,1478855891.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:11.412Z,1478855891.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:11.811Z,1478855891.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:11.842Z,1478855891.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:12.183Z,1478855892.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:12.281Z,1478855892.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:12.581Z,1478855892.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:12.628Z,1478855892.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:12.981Z,1478855892.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:13.015Z,1478855893.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:13.385Z,1478855893.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:13.456Z,1478855893.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:13.789Z,1478855893.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:13.821Z,1478855893.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:14.181Z,1478855894.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:14.259Z,1478855894.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:14.581Z,1478855894.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:14.641Z,1478855894.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:14.985Z,1478855894.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:15.030Z,1478855895.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:15.388Z,1478855895.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:15.403Z,1478855895.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:15.787Z,1478855895.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:15.802Z,1478855895.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:16.188Z,1478855896.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:16.203Z,1478855896.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:16.588Z,1478855896.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:16.611Z,1478855896.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:16.987Z,1478855896.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:17.006Z,1478855897.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:17.400Z,1478855897.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:17.425Z,1478855897.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:17.781Z,1478855897.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:17.865Z,1478855897.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:18.181Z,1478855898.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:18.206Z,1478855898.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:18.598Z,1478855898.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:18.643Z,1478855898.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:18.981Z,1478855898.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:18.996Z,1478855898.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:19.393Z,1478855899.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:19.500Z,1478855899.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:19.781Z,1478855899.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:19.806Z,1478855899.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:20.181Z,1478855900.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:20.217Z,1478855900.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:20.581Z,1478855900.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:20.625Z,1478855900.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:20.981Z,1478855900.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:21.015Z,1478855901.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:21.386Z,1478855901.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:21.425Z,1478855901.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:21.781Z,1478855901.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:21.816Z,1478855901.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:22.181Z,1478855902.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:22.227Z,1478855902.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:22.581Z,1478855902.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:22.619Z,1478855902.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:22.981Z,1478855902.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:23.077Z,1478855903.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:23.389Z,1478855903.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:23.417Z,1478855903.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:23.789Z,1478855903.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:23.821Z,1478855903.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:24.181Z,1478855904.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:24.221Z,1478855904.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:24.584Z,1478855904.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:24.616Z,1478855904.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:24.992Z,1478855904.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:25.010Z,1478855905.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:25.395Z,1478855905.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:25.413Z,1478855905.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:25.792Z,1478855905.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:25.801Z,1478855905.801 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T09:18:25.801Z,1478855905.801 [BPC1] Data Fault, FailCount= 1
2016-11-11T09:18:25.801Z,1478855905.801 [BPC1](ERROR): Data Fault
2016-11-11T09:18:25.811Z,1478855905.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:25.852Z,1478855905.852 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:18:26.192Z,1478855906.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:26.214Z,1478855906.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:26.581Z,1478855906.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:26.616Z,1478855906.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:30.134Z,1478855910.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:30.160Z,1478855910.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:30.179Z,1478855910.180 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:18:30.180Z,1478855910.180 [BPC1] No Fault, FailCount= 1
2016-11-11T09:18:30.257Z,1478855910.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:30.347Z,1478855910.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:30.650Z,1478855910.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:30.715Z,1478855910.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:31.021Z,1478855911.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:31.067Z,1478855911.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:31.421Z,1478855911.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:31.442Z,1478855911.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:31.815Z,1478855911.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:31.850Z,1478855911.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:32.228Z,1478855912.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:32.269Z,1478855912.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:32.618Z,1478855912.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:32.653Z,1478855912.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:33.017Z,1478855913.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:33.062Z,1478855913.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:33.420Z,1478855913.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:33.449Z,1478855913.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:33.826Z,1478855913.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:33.843Z,1478855913.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:34.224Z,1478855914.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:34.254Z,1478855914.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:34.644Z,1478855914.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:34.709Z,1478855914.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:35.012Z,1478855915.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:35.058Z,1478855915.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:35.428Z,1478855915.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:35.456Z,1478855915.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:35.823Z,1478855915.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:35.865Z,1478855915.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:36.249Z,1478855916.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:36.345Z,1478855916.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:36.628Z,1478855916.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:36.678Z,1478855916.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:37.021Z,1478855917.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:37.041Z,1478855917.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:37.424Z,1478855917.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:37.464Z,1478855917.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:37.813Z,1478855917.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:37.861Z,1478855917.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:38.214Z,1478855918.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:38.257Z,1478855918.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:38.613Z,1478855918.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:38.646Z,1478855918.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:39.013Z,1478855919.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:39.055Z,1478855919.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:39.412Z,1478855919.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:39.458Z,1478855919.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:39.814Z,1478855919.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:39.857Z,1478855919.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:40.214Z,1478855920.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:40.253Z,1478855920.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:40.613Z,1478855920.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:40.663Z,1478855920.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:41.019Z,1478855921.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:41.066Z,1478855921.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:41.420Z,1478855921.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:41.444Z,1478855921.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:41.813Z,1478855921.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:41.853Z,1478855921.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:42.213Z,1478855922.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:42.254Z,1478855922.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:42.612Z,1478855922.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:42.707Z,1478855922.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:43.013Z,1478855923.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:43.097Z,1478855923.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:43.416Z,1478855923.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:43.432Z,1478855923.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:43.818Z,1478855923.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:43.869Z,1478855923.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:44.214Z,1478855924.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:44.247Z,1478855924.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:44.619Z,1478855924.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:44.675Z,1478855924.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:45.019Z,1478855925.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:45.071Z,1478855925.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:45.411Z,1478855925.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:45.441Z,1478855925.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:45.821Z,1478855925.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:45.845Z,1478855925.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:46.219Z,1478855926.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:46.235Z,1478855926.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:46.611Z,1478855926.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:46.645Z,1478855926.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:47.026Z,1478855927.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:47.042Z,1478855927.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:47.442Z,1478855927.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:47.469Z,1478855927.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:47.828Z,1478855927.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:47.857Z,1478855927.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:48.217Z,1478855928.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:48.253Z,1478855928.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:48.616Z,1478855928.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:48.633Z,1478855928.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:49.020Z,1478855929.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:49.034Z,1478855929.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:49.417Z,1478855929.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:49.446Z,1478855929.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:49.819Z,1478855929.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:49.834Z,1478855929.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:50.226Z,1478855930.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:50.245Z,1478855930.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:50.626Z,1478855930.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:50.642Z,1478855930.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:51.040Z,1478855931.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:51.093Z,1478855931.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:51.421Z,1478855931.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:51.452Z,1478855931.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:51.818Z,1478855931.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:51.847Z,1478855931.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:52.229Z,1478855932.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:52.244Z,1478855932.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:52.640Z,1478855932.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:52.690Z,1478855932.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:53.023Z,1478855933.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:53.040Z,1478855933.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:53.427Z,1478855933.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:53.442Z,1478855933.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:53.818Z,1478855933.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:53.844Z,1478855933.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:54.211Z,1478855934.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:54.245Z,1478855934.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:54.464Z,1478855934.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:54.613Z,1478855934.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:54.645Z,1478855934.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:55.011Z,1478855935.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:55.038Z,1478855935.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:55.260Z,1478855935.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:55.419Z,1478855935.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:55.434Z,1478855935.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:55.811Z,1478855935.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:55.833Z,1478855935.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:56.217Z,1478855936.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:56.237Z,1478855936.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:56.617Z,1478855936.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:56.632Z,1478855936.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:57.014Z,1478855937.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:57.041Z,1478855937.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:57.423Z,1478855937.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:57.517Z,1478855937.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:57.811Z,1478855937.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:57.847Z,1478855937.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:58.215Z,1478855938.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:58.281Z,1478855938.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:58.611Z,1478855938.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:58.645Z,1478855938.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:59.011Z,1478855939.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:59.078Z,1478855939.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:59.411Z,1478855939.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:59.463Z,1478855939.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:18:59.815Z,1478855939.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:18:59.850Z,1478855939.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:00.211Z,1478855940.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:00.238Z,1478855940.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:00.611Z,1478855940.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:00.654Z,1478855940.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:01.012Z,1478855941.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:01.049Z,1478855941.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:01.419Z,1478855941.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:01.455Z,1478855941.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:01.814Z,1478855941.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:01.833Z,1478855941.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:02.219Z,1478855942.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:02.234Z,1478855942.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:02.618Z,1478855942.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:02.633Z,1478855942.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:03.019Z,1478855943.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:03.034Z,1478855943.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:03.427Z,1478855943.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:03.450Z,1478855943.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:03.852Z,1478855943.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:03.887Z,1478855943.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:04.220Z,1478855944.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:04.255Z,1478855944.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:04.613Z,1478855944.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:04.650Z,1478855944.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:05.013Z,1478855945.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:05.044Z,1478855945.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:05.424Z,1478855945.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:05.448Z,1478855945.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:05.812Z,1478855945.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:05.845Z,1478855945.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:06.218Z,1478855946.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:06.234Z,1478855946.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:06.626Z,1478855946.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:06.646Z,1478855946.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:07.009Z,1478855947.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:07.054Z,1478855947.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:07.451Z,1478855947.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:07.485Z,1478855947.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:07.813Z,1478855947.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:07.833Z,1478855947.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:08.222Z,1478855948.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:08.238Z,1478855948.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:08.444Z,1478855948.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:08.623Z,1478855948.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:08.660Z,1478855948.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:09.040Z,1478855949.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:09.083Z,1478855949.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:09.240Z,1478855949.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:09.412Z,1478855949.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:09.454Z,1478855949.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:09.811Z,1478855949.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:09.837Z,1478855949.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:10.214Z,1478855950.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:10.251Z,1478855950.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:10.623Z,1478855950.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:10.645Z,1478855950.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:11.025Z,1478855951.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:11.045Z,1478855951.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:11.411Z,1478855951.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:11.476Z,1478855951.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:11.819Z,1478855951.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:11.877Z,1478855951.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:12.218Z,1478855952.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:12.250Z,1478855952.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:12.616Z,1478855952.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:12.666Z,1478855952.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:13.015Z,1478855953.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:13.030Z,1478855953.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:13.418Z,1478855953.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:13.472Z,1478855953.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:13.818Z,1478855953.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:13.864Z,1478855953.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:14.221Z,1478855954.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:14.245Z,1478855954.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:14.618Z,1478855954.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:14.636Z,1478855954.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:15.023Z,1478855955.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:15.041Z,1478855955.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:15.420Z,1478855955.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:15.455Z,1478855955.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:15.811Z,1478855955.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:15.826Z,1478855955.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:16.211Z,1478855956.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:16.230Z,1478855956.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:16.611Z,1478855956.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:16.631Z,1478855956.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:17.015Z,1478855957.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:17.030Z,1478855957.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:17.420Z,1478855957.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:17.437Z,1478855957.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:17.814Z,1478855957.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:17.848Z,1478855957.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:18.221Z,1478855958.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:18.238Z,1478855958.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:18.611Z,1478855958.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:18.645Z,1478855958.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:19.025Z,1478855959.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:19.044Z,1478855959.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:19.411Z,1478855959.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:19.440Z,1478855959.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:19.817Z,1478855959.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:19.856Z,1478855959.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:20.256Z,1478855960.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:20.296Z,1478855960.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:20.624Z,1478855960.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:20.670Z,1478855960.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:21.022Z,1478855961.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:21.041Z,1478855961.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:21.420Z,1478855961.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:21.444Z,1478855961.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:21.823Z,1478855961.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:21.861Z,1478855961.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:22.220Z,1478855962.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:22.254Z,1478855962.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:22.615Z,1478855962.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:22.645Z,1478855962.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:23.013Z,1478855963.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:23.050Z,1478855963.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:23.423Z,1478855963.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:23.470Z,1478855963.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:23.826Z,1478855963.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:23.835Z,1478855963.835 [PNI_TCM](ERROR): CRC does not match. Expected:0x5272 got:0x45004
2016-11-11T09:19:23.871Z,1478855963.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:24.243Z,1478855964.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:24.261Z,1478855964.261 [PNI_TCM](ERROR): CRC does not match. Expected:0x13339 got:0x60061
2016-11-11T09:19:24.297Z,1478855964.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:24.631Z,1478855964.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:24.651Z,1478855964.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:25.027Z,1478855965.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:25.073Z,1478855965.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:25.429Z,1478855965.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:25.458Z,1478855965.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:25.825Z,1478855965.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:25.894Z,1478855965.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:26.223Z,1478855966.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:26.285Z,1478855966.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:26.619Z,1478855966.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:26.665Z,1478855966.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:30.049Z,1478855970.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:30.120Z,1478855970.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:30.217Z,1478855970.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:30.266Z,1478855970.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:30.576Z,1478855970.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:30.634Z,1478855970.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:30.976Z,1478855970.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:31.031Z,1478855971.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:31.378Z,1478855971.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:31.401Z,1478855971.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:31.776Z,1478855971.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:31.799Z,1478855971.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:32.173Z,1478855972.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:32.198Z,1478855972.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:32.569Z,1478855972.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:32.609Z,1478855972.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:32.969Z,1478855972.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:33.005Z,1478855973.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:33.370Z,1478855973.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:33.393Z,1478855973.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:33.783Z,1478855973.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:33.799Z,1478855973.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:34.175Z,1478855974.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:34.207Z,1478855974.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:34.572Z,1478855974.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:34.603Z,1478855974.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:34.980Z,1478855974.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:35.001Z,1478855975.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:35.380Z,1478855975.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:35.406Z,1478855975.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:35.769Z,1478855975.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:35.805Z,1478855975.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:36.173Z,1478855976.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:36.239Z,1478855976.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:36.569Z,1478855976.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:36.604Z,1478855976.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:36.969Z,1478855976.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:37.032Z,1478855977.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:37.381Z,1478855977.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:37.400Z,1478855977.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:37.784Z,1478855977.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:37.805Z,1478855977.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:38.169Z,1478855978.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:38.201Z,1478855978.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:38.569Z,1478855978.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:38.595Z,1478855978.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:38.973Z,1478855978.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:39.005Z,1478855979.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:39.369Z,1478855979.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:39.405Z,1478855979.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:39.777Z,1478855979.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:39.803Z,1478855979.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:40.169Z,1478855980.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:40.201Z,1478855980.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:40.569Z,1478855980.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:40.597Z,1478855980.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:40.973Z,1478855980.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:41.079Z,1478855981.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:41.369Z,1478855981.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:41.410Z,1478855981.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:41.769Z,1478855981.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:41.819Z,1478855981.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:42.169Z,1478855982.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:42.207Z,1478855982.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:42.576Z,1478855982.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:42.677Z,1478855982.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:42.976Z,1478855982.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:42.991Z,1478855982.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:43.377Z,1478855983.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:43.407Z,1478855983.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:43.772Z,1478855983.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:43.821Z,1478855983.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:44.174Z,1478855984.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:44.189Z,1478855984.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:44.573Z,1478855984.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:44.629Z,1478855984.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:44.972Z,1478855984.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:45.070Z,1478855985.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:45.369Z,1478855985.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:45.407Z,1478855985.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:45.769Z,1478855985.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:45.801Z,1478855985.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:46.169Z,1478855986.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:46.212Z,1478855986.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:46.569Z,1478855986.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:46.605Z,1478855986.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:46.974Z,1478855986.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:47.002Z,1478855987.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:47.369Z,1478855987.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:47.410Z,1478855987.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:47.769Z,1478855987.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:47.810Z,1478855987.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:48.177Z,1478855988.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:48.214Z,1478855988.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:48.570Z,1478855988.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:48.601Z,1478855988.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:48.977Z,1478855988.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:49.005Z,1478855989.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:49.389Z,1478855989.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:49.409Z,1478855989.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:49.776Z,1478855989.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:49.799Z,1478855989.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:50.170Z,1478855990.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:50.206Z,1478855990.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:50.580Z,1478855990.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:50.615Z,1478855990.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:50.969Z,1478855990.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:50.998Z,1478855990.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:51.369Z,1478855991.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:51.410Z,1478855991.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:51.775Z,1478855991.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:51.801Z,1478855991.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:52.181Z,1478855992.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:52.210Z,1478855992.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:52.573Z,1478855992.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:52.622Z,1478855992.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:52.978Z,1478855992.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:53.002Z,1478855993.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:53.381Z,1478855993.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:53.415Z,1478855993.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:53.782Z,1478855993.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:53.862Z,1478855993.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:54.176Z,1478855994.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:54.196Z,1478855994.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:54.579Z,1478855994.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:54.595Z,1478855994.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:54.977Z,1478855994.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:54.998Z,1478855994.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:55.377Z,1478855995.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:55.419Z,1478855995.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:55.769Z,1478855995.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:55.829Z,1478855995.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:56.177Z,1478855996.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:56.205Z,1478855996.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:56.574Z,1478855996.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:56.590Z,1478855996.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:56.969Z,1478855996.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:57.069Z,1478855997.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:57.369Z,1478855997.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:57.443Z,1478855997.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:57.770Z,1478855997.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:57.815Z,1478855997.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:58.176Z,1478855998.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:58.218Z,1478855998.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:58.569Z,1478855998.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:58.646Z,1478855998.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:58.968Z,1478855998.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:59.049Z,1478855999.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:59.385Z,1478855999.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:59.441Z,1478855999.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:19:59.779Z,1478855999.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:19:59.797Z,1478855999.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:00.176Z,1478856000.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:00.205Z,1478856000.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:00.580Z,1478856000.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:00.586Z,1478856000.586 [PNI_TCM](ERROR): CRC does not match. Expected:0x13880 got:0x49153
2016-11-11T09:20:00.615Z,1478856000.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:00.976Z,1478856000.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:01.066Z,1478856001.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:01.371Z,1478856001.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:01.398Z,1478856001.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:01.769Z,1478856001.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:01.805Z,1478856001.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:02.170Z,1478856002.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:02.211Z,1478856002.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:02.571Z,1478856002.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:02.586Z,1478856002.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:02.974Z,1478856002.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:02.988Z,1478856002.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:03.369Z,1478856003.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:03.414Z,1478856003.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:03.771Z,1478856003.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:03.788Z,1478856003.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:04.175Z,1478856004.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:04.197Z,1478856004.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:04.573Z,1478856004.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:04.588Z,1478856004.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:04.978Z,1478856004.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:04.995Z,1478856004.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:05.373Z,1478856005.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:05.396Z,1478856005.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:05.771Z,1478856005.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:05.786Z,1478856005.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:06.169Z,1478856006.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:06.185Z,1478856006.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:06.574Z,1478856006.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:06.592Z,1478856006.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:06.974Z,1478856006.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:06.989Z,1478856006.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:07.378Z,1478856007.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:07.394Z,1478856007.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:07.769Z,1478856007.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:07.801Z,1478856007.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:08.170Z,1478856008.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:08.199Z,1478856008.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:08.571Z,1478856008.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:08.586Z,1478856008.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:08.974Z,1478856008.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:09.055Z,1478856009.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:09.379Z,1478856009.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:09.401Z,1478856009.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:09.783Z,1478856009.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:09.799Z,1478856009.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:10.173Z,1478856010.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:10.196Z,1478856010.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:10.570Z,1478856010.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:10.650Z,1478856010.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:10.969Z,1478856010.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:11.094Z,1478856011.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:11.379Z,1478856011.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:11.394Z,1478856011.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:11.779Z,1478856011.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:11.794Z,1478856011.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:12.176Z,1478856012.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:12.231Z,1478856012.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:12.577Z,1478856012.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:12.591Z,1478856012.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:12.990Z,1478856012.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:13.089Z,1478856013.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:13.371Z,1478856013.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:13.399Z,1478856013.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:13.773Z,1478856013.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:13.859Z,1478856013.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:14.169Z,1478856014.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:14.184Z,1478856014.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:14.571Z,1478856014.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:14.586Z,1478856014.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:14.983Z,1478856014.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:15.060Z,1478856015.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:15.375Z,1478856015.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:15.397Z,1478856015.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:15.769Z,1478856015.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:15.794Z,1478856015.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:16.183Z,1478856016.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:16.198Z,1478856016.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:16.570Z,1478856016.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:16.604Z,1478856016.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:16.969Z,1478856016.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:17.001Z,1478856017.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:17.380Z,1478856017.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:17.404Z,1478856017.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:17.770Z,1478856017.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:17.804Z,1478856017.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:18.170Z,1478856018.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:18.201Z,1478856018.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:18.584Z,1478856018.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:18.599Z,1478856018.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:18.969Z,1478856018.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:19.002Z,1478856019.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:19.371Z,1478856019.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:19.406Z,1478856019.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:19.414Z,1478856019.414 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:19.414Z,1478856019.414 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 71
2016-11-11T09:20:19.414Z,1478856019.414 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:20:19.416Z,1478856019.416 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:19.417Z,1478856019.417 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 71
2016-11-11T09:20:19.417Z,1478856019.417 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:20:19.477Z,1478856019.477 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:20:19.477Z,1478856019.477 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:20:19.785Z,1478856019.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:19.810Z,1478856019.810 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:19.810Z,1478856019.810 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2016-11-11T09:20:19.810Z,1478856019.810 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:20:19.829Z,1478856019.829 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:20:19.829Z,1478856019.829 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:20:19.829Z,1478856019.829 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 71
2016-11-11T09:20:19.830Z,1478856019.830 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:20:19.830Z,1478856019.830 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 71
2016-11-11T09:20:20.169Z,1478856020.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:20.192Z,1478856020.192 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:20:20.192Z,1478856020.192 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:20:20.193Z,1478856020.193 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:20:20.193Z,1478856020.193 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:20:20.194Z,1478856020.194 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:20:20.194Z,1478856020.194 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:20:20.254Z,1478856020.254 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:20:20.254Z,1478856020.254 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2016-11-11T09:20:20.576Z,1478856020.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:20.590Z,1478856020.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:20:20.591Z,1478856020.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:20:20.591Z,1478856020.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:20:20.973Z,1478856020.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:20.996Z,1478856020.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:21.376Z,1478856021.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:21.397Z,1478856021.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:21.769Z,1478856021.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:21.815Z,1478856021.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:22.173Z,1478856022.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:22.212Z,1478856022.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:22.573Z,1478856022.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:22.611Z,1478856022.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:22.984Z,1478856022.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:23.052Z,1478856023.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:23.373Z,1478856023.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:23.393Z,1478856023.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:23.769Z,1478856023.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:23.784Z,1478856023.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:24.176Z,1478856024.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:24.191Z,1478856024.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:24.580Z,1478856024.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:24.633Z,1478856024.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:25.011Z,1478856025.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:25.043Z,1478856025.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:25.369Z,1478856025.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:25.433Z,1478856025.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:25.773Z,1478856025.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:25.805Z,1478856025.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:26.169Z,1478856026.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:26.225Z,1478856026.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:26.569Z,1478856026.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:26.601Z,1478856026.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:27.039Z,1478856027.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:27.100Z,1478856027.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:30.341Z,1478856030.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:30.386Z,1478856030.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:30.488Z,1478856030.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:30.526Z,1478856030.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:30.857Z,1478856030.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:30.893Z,1478856030.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:31.273Z,1478856031.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:31.293Z,1478856031.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:31.661Z,1478856031.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:31.693Z,1478856031.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:32.073Z,1478856032.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:32.089Z,1478856032.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:32.457Z,1478856032.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:32.492Z,1478856032.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:32.857Z,1478856032.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:32.885Z,1478856032.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:33.261Z,1478856033.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:33.297Z,1478856033.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:33.657Z,1478856033.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:33.672Z,1478856033.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:34.057Z,1478856034.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:34.072Z,1478856034.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:34.461Z,1478856034.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:34.481Z,1478856034.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:34.861Z,1478856034.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:34.880Z,1478856034.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:35.257Z,1478856035.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:35.289Z,1478856035.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:35.657Z,1478856035.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:35.691Z,1478856035.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:36.056Z,1478856036.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:36.090Z,1478856036.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:36.457Z,1478856036.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:36.489Z,1478856036.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:36.857Z,1478856036.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:36.889Z,1478856036.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:37.257Z,1478856037.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:37.277Z,1478856037.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:37.661Z,1478856037.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:37.676Z,1478856037.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:38.064Z,1478856038.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:38.079Z,1478856038.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:38.463Z,1478856038.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:38.478Z,1478856038.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:38.867Z,1478856038.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:38.883Z,1478856038.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:39.265Z,1478856039.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:39.297Z,1478856039.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:39.657Z,1478856039.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:39.696Z,1478856039.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:40.057Z,1478856040.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:40.089Z,1478856040.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:40.457Z,1478856040.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:40.489Z,1478856040.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:40.861Z,1478856040.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:40.893Z,1478856040.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:41.257Z,1478856041.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:41.309Z,1478856041.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:41.665Z,1478856041.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:41.674Z,1478856041.674 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T09:20:41.674Z,1478856041.674 [BPC1] Data Fault, FailCount= 1
2016-11-11T09:20:41.674Z,1478856041.674 [BPC1](ERROR): Data Fault
2016-11-11T09:20:41.682Z,1478856041.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:41.738Z,1478856041.738 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:20:42.067Z,1478856042.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:42.083Z,1478856042.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:42.463Z,1478856042.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:42.482Z,1478856042.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:42.868Z,1478856042.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:42.883Z,1478856042.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:42.907Z,1478856042.907 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:20:42.907Z,1478856042.907 [BPC1] No Fault, FailCount= 1
2016-11-11T09:20:43.265Z,1478856043.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:43.338Z,1478856043.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:43.660Z,1478856043.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:43.718Z,1478856043.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:44.065Z,1478856044.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:44.080Z,1478856044.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:44.460Z,1478856044.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:44.493Z,1478856044.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:44.864Z,1478856044.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:44.879Z,1478856044.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:45.269Z,1478856045.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:45.284Z,1478856045.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:45.664Z,1478856045.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:45.685Z,1478856045.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:46.064Z,1478856046.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:46.086Z,1478856046.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:46.464Z,1478856046.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:46.486Z,1478856046.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:46.857Z,1478856046.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:46.887Z,1478856046.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:47.257Z,1478856047.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:47.290Z,1478856047.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:47.657Z,1478856047.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:47.690Z,1478856047.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:48.057Z,1478856048.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:48.072Z,1478856048.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:48.460Z,1478856048.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:48.476Z,1478856048.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:48.865Z,1478856048.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:48.880Z,1478856048.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:49.263Z,1478856049.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:49.287Z,1478856049.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:49.664Z,1478856049.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:49.680Z,1478856049.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:50.067Z,1478856050.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:50.083Z,1478856050.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:50.464Z,1478856050.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:50.479Z,1478856050.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:50.860Z,1478856050.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:50.897Z,1478856050.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:51.265Z,1478856051.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:51.302Z,1478856051.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:51.657Z,1478856051.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:51.702Z,1478856051.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:52.057Z,1478856052.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:52.078Z,1478856052.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:52.465Z,1478856052.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:52.500Z,1478856052.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:52.860Z,1478856052.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:52.881Z,1478856052.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:53.264Z,1478856053.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:53.279Z,1478856053.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:53.664Z,1478856053.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:53.691Z,1478856053.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:54.069Z,1478856054.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:54.148Z,1478856054.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:54.457Z,1478856054.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:54.498Z,1478856054.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:54.857Z,1478856054.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:54.882Z,1478856054.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:55.257Z,1478856055.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:55.297Z,1478856055.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:55.657Z,1478856055.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:55.721Z,1478856055.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:56.057Z,1478856056.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:56.093Z,1478856056.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:56.461Z,1478856056.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:56.514Z,1478856056.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:56.864Z,1478856056.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:56.892Z,1478856056.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:57.260Z,1478856057.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:57.313Z,1478856057.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:57.665Z,1478856057.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:57.714Z,1478856057.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:58.066Z,1478856058.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:58.082Z,1478856058.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:58.463Z,1478856058.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:58.488Z,1478856058.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:58.865Z,1478856058.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:58.893Z,1478856058.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:59.257Z,1478856059.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:59.303Z,1478856059.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:20:59.657Z,1478856059.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:20:59.701Z,1478856059.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:00.057Z,1478856060.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:00.095Z,1478856060.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:00.457Z,1478856060.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:00.476Z,1478856060.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:00.862Z,1478856060.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:00.887Z,1478856060.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:01.261Z,1478856061.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:01.285Z,1478856061.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:01.664Z,1478856061.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:01.683Z,1478856061.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:02.067Z,1478856062.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:02.082Z,1478856062.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:02.465Z,1478856062.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:02.498Z,1478856062.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:02.857Z,1478856062.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:02.887Z,1478856062.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:03.257Z,1478856063.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:03.292Z,1478856063.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:03.658Z,1478856063.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:03.689Z,1478856063.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:04.057Z,1478856064.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:04.097Z,1478856064.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:04.461Z,1478856064.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:04.490Z,1478856064.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:04.857Z,1478856064.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:04.946Z,1478856064.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:05.266Z,1478856065.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:05.282Z,1478856065.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:05.664Z,1478856065.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:05.706Z,1478856065.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:06.064Z,1478856066.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:06.083Z,1478856066.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:06.465Z,1478856066.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:06.481Z,1478856066.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:06.864Z,1478856066.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:06.929Z,1478856066.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:07.261Z,1478856067.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:07.329Z,1478856067.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:07.661Z,1478856067.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:07.697Z,1478856067.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:08.063Z,1478856068.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:08.089Z,1478856068.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:08.459Z,1478856068.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:08.526Z,1478856068.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:08.857Z,1478856068.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:08.938Z,1478856068.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:09.257Z,1478856069.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:09.299Z,1478856069.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:09.663Z,1478856069.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:09.725Z,1478856069.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:10.066Z,1478856070.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:10.082Z,1478856070.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:10.464Z,1478856070.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:10.491Z,1478856070.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:10.865Z,1478856070.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:10.949Z,1478856070.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:11.266Z,1478856071.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:11.281Z,1478856071.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:11.667Z,1478856071.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:11.715Z,1478856071.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:12.064Z,1478856072.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:12.121Z,1478856072.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:12.466Z,1478856072.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:12.473Z,1478856072.473 [PNI_TCM](ERROR): CRC does not match. Expected:0x58793 got:0x48606
2016-11-11T09:21:12.517Z,1478856072.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:12.867Z,1478856072.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:12.882Z,1478856072.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:13.271Z,1478856073.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:13.287Z,1478856073.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:13.669Z,1478856073.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:13.687Z,1478856073.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:14.058Z,1478856074.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:14.086Z,1478856074.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:14.244Z,1478856074.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:14.459Z,1478856074.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:14.493Z,1478856074.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:14.859Z,1478856074.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:14.894Z,1478856074.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:15.041Z,1478856075.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:15.257Z,1478856075.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:15.289Z,1478856075.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:15.670Z,1478856075.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:15.685Z,1478856075.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:16.067Z,1478856076.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:16.083Z,1478856076.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:16.465Z,1478856076.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:16.480Z,1478856076.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:16.869Z,1478856076.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:16.886Z,1478856076.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:17.267Z,1478856077.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:17.283Z,1478856077.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:17.659Z,1478856077.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:17.693Z,1478856077.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:18.058Z,1478856078.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:18.089Z,1478856078.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:18.457Z,1478856078.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:18.492Z,1478856078.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:18.859Z,1478856078.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:18.899Z,1478856078.899 [PNI_TCM](ERROR): CRC does not match. Expected:0x20243 got:0x7361
2016-11-11T09:21:18.951Z,1478856078.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:19.259Z,1478856079.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:19.275Z,1478856079.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:19.661Z,1478856079.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:19.677Z,1478856079.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:20.071Z,1478856080.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:20.086Z,1478856080.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:20.468Z,1478856080.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:20.483Z,1478856080.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:20.868Z,1478856080.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:20.935Z,1478856080.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:21.257Z,1478856081.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:21.289Z,1478856081.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:21.658Z,1478856081.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:21.686Z,1478856081.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:22.059Z,1478856082.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:22.093Z,1478856082.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:22.458Z,1478856082.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:22.493Z,1478856082.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:22.868Z,1478856082.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:22.982Z,1478856082.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:23.259Z,1478856083.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:23.275Z,1478856083.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:23.659Z,1478856083.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:23.674Z,1478856083.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:24.061Z,1478856084.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:24.117Z,1478856084.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:24.464Z,1478856084.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:24.479Z,1478856084.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:24.892Z,1478856084.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:24.950Z,1478856084.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:25.259Z,1478856085.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:25.293Z,1478856085.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:25.657Z,1478856085.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:25.705Z,1478856085.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:26.057Z,1478856086.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:26.113Z,1478856086.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:26.136Z,1478856086.136 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T09:21:26.136Z,1478856086.136 [Default:CheckIn:C.Wait] Stopped
2016-11-11T09:21:26.136Z,1478856086.136 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T09:21:26.136Z,1478856086.136 [Default:CheckIn:D] Running Loop=1
2016-11-11T09:21:26.459Z,1478856086.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:26.491Z,1478856086.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:26.508Z,1478856086.508 [Default:CheckIn:D] Stopped
2016-11-11T09:21:26.508Z,1478856086.508 [Default:CheckIn:E] Running Loop=1
2016-11-11T09:21:26.859Z,1478856086.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:26.893Z,1478856086.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:26.903Z,1478856086.903 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 271.419971 min 
2016-11-11T09:21:26.903Z,1478856086.903 [Default:CheckIn:E] Stopped
2016-11-11T09:21:26.903Z,1478856086.903 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T09:21:26.903Z,1478856086.903 [Default:CheckIn] Stopped
2016-11-11T09:21:26.904Z,1478856086.904 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T09:21:26.904Z,1478856086.904 [Default:CheckIn](INFO): Running loop #27
2016-11-11T09:21:26.904Z,1478856086.904 [Default:CheckIn] Running Loop=27
2016-11-11T09:21:26.904Z,1478856086.904 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T09:21:26.904Z,1478856086.904 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T09:21:27.266Z,1478856087.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:27.299Z,1478856087.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:28.232Z,1478856088.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:29.028Z,1478856089.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:30.566Z,1478856090.566 [NAL9602](INFO): Powering up
2016-11-11T09:21:30.594Z,1478856090.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:30.620Z,1478856090.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:30.711Z,1478856090.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:30.746Z,1478856090.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:31.104Z,1478856091.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:31.154Z,1478856091.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:31.512Z,1478856091.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:31.527Z,1478856091.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:31.905Z,1478856091.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:31.921Z,1478856091.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:32.307Z,1478856092.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:32.322Z,1478856092.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:32.708Z,1478856092.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:32.729Z,1478856092.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:33.108Z,1478856093.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:33.125Z,1478856093.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:33.512Z,1478856093.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:33.528Z,1478856093.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:33.912Z,1478856093.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:33.927Z,1478856093.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:34.301Z,1478856094.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:34.336Z,1478856094.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:34.701Z,1478856094.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:34.729Z,1478856094.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:35.101Z,1478856095.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:35.126Z,1478856095.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:35.508Z,1478856095.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:35.531Z,1478856095.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:35.901Z,1478856095.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:35.926Z,1478856095.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:36.301Z,1478856096.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:36.353Z,1478856096.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:36.701Z,1478856096.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:36.738Z,1478856096.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:37.101Z,1478856097.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:37.138Z,1478856097.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:37.501Z,1478856097.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:37.537Z,1478856097.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:37.901Z,1478856097.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:37.959Z,1478856097.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:38.301Z,1478856098.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:38.344Z,1478856098.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:38.701Z,1478856098.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:38.746Z,1478856098.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:39.109Z,1478856099.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:39.141Z,1478856099.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:39.501Z,1478856099.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:39.550Z,1478856099.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:39.901Z,1478856099.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:39.957Z,1478856099.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:40.305Z,1478856100.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:40.340Z,1478856100.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:40.701Z,1478856100.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:40.721Z,1478856100.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:41.132Z,1478856101.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:41.152Z,1478856101.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:41.485Z,1478856101.485 [NAL9602](INFO): NAL9602 initialized
2016-11-11T09:21:41.502Z,1478856101.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:41.534Z,1478856101.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:41.908Z,1478856101.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:41.923Z,1478856101.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:42.289Z,1478856102.289 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T09:21:42.289Z,1478856102.289 [NAL9602] Data Fault, FailCount= 4
2016-11-11T09:21:42.289Z,1478856102.289 [NAL9602](ERROR): Data Fault
2016-11-11T09:21:42.313Z,1478856102.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:42.349Z,1478856102.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:42.378Z,1478856102.378 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T09:21:42.688Z,1478856102.688 [NAL9602](INFO): Powering down
2016-11-11T09:21:42.705Z,1478856102.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:42.725Z,1478856102.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:43.109Z,1478856103.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:43.124Z,1478856103.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:43.508Z,1478856103.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:43.523Z,1478856103.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:43.563Z,1478856103.563 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T09:21:43.563Z,1478856103.563 [NAL9602] No Fault, FailCount= 4
2016-11-11T09:21:43.908Z,1478856103.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:43.923Z,1478856103.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:44.308Z,1478856104.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:44.322Z,1478856104.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:44.704Z,1478856104.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:44.732Z,1478856104.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:45.108Z,1478856105.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:45.123Z,1478856105.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:45.509Z,1478856105.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:45.524Z,1478856105.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:45.908Z,1478856105.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:45.930Z,1478856105.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:46.309Z,1478856106.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:46.325Z,1478856106.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:46.701Z,1478856106.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:46.735Z,1478856106.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:47.121Z,1478856107.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:47.149Z,1478856107.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:47.516Z,1478856107.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:47.532Z,1478856107.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:47.885Z,1478856107.885 [NAL9602](INFO): Powering up NAL9602
2016-11-11T09:21:47.902Z,1478856107.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:47.941Z,1478856107.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:48.301Z,1478856108.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:48.334Z,1478856108.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:48.701Z,1478856108.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:48.728Z,1478856108.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:49.101Z,1478856109.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:49.137Z,1478856109.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:49.505Z,1478856109.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:49.537Z,1478856109.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:49.905Z,1478856109.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:49.937Z,1478856109.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:50.301Z,1478856110.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:50.337Z,1478856110.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:50.709Z,1478856110.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:50.761Z,1478856110.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:51.116Z,1478856111.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:51.132Z,1478856111.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:51.508Z,1478856111.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:51.535Z,1478856111.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:51.900Z,1478856111.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:51.957Z,1478856111.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:52.301Z,1478856112.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:52.334Z,1478856112.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:52.701Z,1478856112.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:52.735Z,1478856112.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:53.112Z,1478856113.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:53.172Z,1478856113.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:53.505Z,1478856113.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:53.538Z,1478856113.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:53.901Z,1478856113.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:53.970Z,1478856113.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:54.301Z,1478856114.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:54.357Z,1478856114.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:54.701Z,1478856114.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:54.732Z,1478856114.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:55.109Z,1478856115.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:55.146Z,1478856115.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:55.505Z,1478856115.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:55.542Z,1478856115.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:55.906Z,1478856115.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:55.933Z,1478856115.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:56.301Z,1478856116.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:56.321Z,1478856116.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:56.702Z,1478856116.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:56.717Z,1478856116.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:57.105Z,1478856117.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:57.125Z,1478856117.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:57.507Z,1478856117.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:57.529Z,1478856117.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:57.909Z,1478856117.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:57.925Z,1478856117.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:58.313Z,1478856118.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:58.328Z,1478856118.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:58.685Z,1478856118.685 [NAL9602](INFO): NAL9602 initialized
2016-11-11T09:21:58.704Z,1478856118.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:58.745Z,1478856118.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:59.104Z,1478856119.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:59.134Z,1478856119.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:59.525Z,1478856119.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:59.605Z,1478856119.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:21:59.924Z,1478856119.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:21:59.953Z,1478856119.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:00.325Z,1478856120.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:00.383Z,1478856120.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:00.701Z,1478856120.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:00.738Z,1478856120.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:01.101Z,1478856121.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:01.155Z,1478856121.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:01.506Z,1478856121.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:01.521Z,1478856121.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:01.912Z,1478856121.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:01.961Z,1478856121.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:02.315Z,1478856122.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:02.349Z,1478856122.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:02.716Z,1478856122.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:02.752Z,1478856122.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:03.114Z,1478856123.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:03.153Z,1478856123.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:03.501Z,1478856123.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:03.527Z,1478856123.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:03.901Z,1478856123.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:03.936Z,1478856123.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:04.301Z,1478856124.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:04.333Z,1478856124.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:04.701Z,1478856124.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:04.729Z,1478856124.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:05.101Z,1478856125.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:05.129Z,1478856125.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:05.504Z,1478856125.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:05.532Z,1478856125.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:05.909Z,1478856125.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:05.929Z,1478856125.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:06.323Z,1478856126.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:06.341Z,1478856126.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:06.719Z,1478856126.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:06.735Z,1478856126.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:07.109Z,1478856127.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:07.141Z,1478856127.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:07.501Z,1478856127.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:07.534Z,1478856127.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:07.901Z,1478856127.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:07.934Z,1478856127.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:08.301Z,1478856128.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:08.333Z,1478856128.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:08.702Z,1478856128.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:08.734Z,1478856128.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:09.110Z,1478856129.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:09.135Z,1478856129.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:09.505Z,1478856129.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:09.531Z,1478856129.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:09.901Z,1478856129.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:09.945Z,1478856129.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:10.316Z,1478856130.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:10.349Z,1478856130.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:10.712Z,1478856130.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:10.745Z,1478856130.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:11.102Z,1478856131.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:11.121Z,1478856131.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:11.513Z,1478856131.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:11.529Z,1478856131.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:11.909Z,1478856131.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:11.924Z,1478856131.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:12.309Z,1478856132.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:12.329Z,1478856132.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:12.704Z,1478856132.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:12.761Z,1478856132.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:13.105Z,1478856133.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:13.127Z,1478856133.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:13.517Z,1478856133.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:13.550Z,1478856133.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:13.905Z,1478856133.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:13.931Z,1478856133.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:14.305Z,1478856134.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:14.337Z,1478856134.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:14.701Z,1478856134.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:14.775Z,1478856134.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:15.101Z,1478856135.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:15.133Z,1478856135.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:15.505Z,1478856135.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:15.561Z,1478856135.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:15.901Z,1478856135.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:15.958Z,1478856135.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:16.305Z,1478856136.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:16.339Z,1478856136.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:16.701Z,1478856136.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:16.737Z,1478856136.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:17.101Z,1478856137.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:17.121Z,1478856137.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:17.505Z,1478856137.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:17.525Z,1478856137.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:17.905Z,1478856137.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:17.925Z,1478856137.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:18.308Z,1478856138.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:18.323Z,1478856138.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:18.720Z,1478856138.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:18.736Z,1478856138.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:19.132Z,1478856139.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:19.159Z,1478856139.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:19.501Z,1478856139.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:19.516Z,1478856139.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:19.905Z,1478856139.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:19.925Z,1478856139.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:20.308Z,1478856140.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:20.323Z,1478856140.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:20.709Z,1478856140.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:20.724Z,1478856140.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:21.101Z,1478856141.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:21.133Z,1478856141.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:21.512Z,1478856141.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:21.533Z,1478856141.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:21.905Z,1478856141.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:21.920Z,1478856141.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:22.301Z,1478856142.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:22.321Z,1478856142.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:22.709Z,1478856142.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:22.729Z,1478856142.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:23.116Z,1478856143.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:23.157Z,1478856143.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:23.520Z,1478856143.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:23.540Z,1478856143.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:23.917Z,1478856143.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:23.934Z,1478856143.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:24.312Z,1478856144.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:24.333Z,1478856144.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:24.701Z,1478856144.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:24.733Z,1478856144.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:25.112Z,1478856145.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:25.136Z,1478856145.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:25.501Z,1478856145.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:25.533Z,1478856145.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:25.901Z,1478856145.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:25.933Z,1478856145.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:26.305Z,1478856146.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:26.357Z,1478856146.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:26.706Z,1478856146.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:26.741Z,1478856146.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:27.105Z,1478856147.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:27.141Z,1478856147.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:27.524Z,1478856147.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:27.555Z,1478856147.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:30.924Z,1478856150.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:30.977Z,1478856150.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:31.081Z,1478856151.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:31.121Z,1478856151.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:31.478Z,1478856151.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:31.513Z,1478856151.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:31.907Z,1478856151.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:31.923Z,1478856151.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:32.288Z,1478856152.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:32.340Z,1478856152.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:32.696Z,1478856152.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:32.725Z,1478856152.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:33.092Z,1478856153.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:33.143Z,1478856153.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:33.478Z,1478856153.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:33.533Z,1478856153.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:33.878Z,1478856153.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:33.914Z,1478856153.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:34.278Z,1478856154.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:34.313Z,1478856154.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:34.678Z,1478856154.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:34.694Z,1478856154.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:35.095Z,1478856155.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:35.132Z,1478856155.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:35.481Z,1478856155.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:35.498Z,1478856155.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:35.885Z,1478856155.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:35.902Z,1478856155.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:36.283Z,1478856156.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:36.306Z,1478856156.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:36.692Z,1478856156.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:36.707Z,1478856156.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:37.100Z,1478856157.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:37.116Z,1478856157.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:37.498Z,1478856157.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:37.520Z,1478856157.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:37.896Z,1478856157.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:37.915Z,1478856157.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:38.280Z,1478856158.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:38.312Z,1478856158.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:38.677Z,1478856158.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:38.708Z,1478856158.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:39.082Z,1478856159.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:39.109Z,1478856159.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:39.477Z,1478856159.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:39.503Z,1478856159.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:39.877Z,1478856159.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:39.902Z,1478856159.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:40.278Z,1478856160.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:40.322Z,1478856160.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:40.682Z,1478856160.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:40.724Z,1478856160.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:41.082Z,1478856161.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:41.121Z,1478856161.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:41.477Z,1478856161.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:41.521Z,1478856161.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:41.892Z,1478856161.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:41.933Z,1478856161.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:42.288Z,1478856162.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:42.327Z,1478856162.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:42.701Z,1478856162.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:42.728Z,1478856162.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:43.089Z,1478856163.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:43.124Z,1478856163.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:43.489Z,1478856163.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:43.509Z,1478856163.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:43.882Z,1478856163.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:43.905Z,1478856163.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:44.277Z,1478856164.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:44.348Z,1478856164.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:44.677Z,1478856164.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:44.714Z,1478856164.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:45.077Z,1478856165.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:45.119Z,1478856165.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:45.482Z,1478856165.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:45.533Z,1478856165.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:45.886Z,1478856165.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:45.934Z,1478856165.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:46.287Z,1478856166.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:46.343Z,1478856166.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:46.688Z,1478856166.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:46.712Z,1478856166.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:47.094Z,1478856167.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:47.157Z,1478856167.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:47.489Z,1478856167.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:47.559Z,1478856167.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:47.893Z,1478856167.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:47.940Z,1478856167.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:48.290Z,1478856168.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:48.332Z,1478856168.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:48.687Z,1478856168.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:48.744Z,1478856168.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:49.079Z,1478856169.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:49.122Z,1478856169.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:49.479Z,1478856169.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:49.518Z,1478856169.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:49.879Z,1478856169.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:49.952Z,1478856169.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:50.288Z,1478856170.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:50.318Z,1478856170.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:50.679Z,1478856170.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:50.721Z,1478856170.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:51.088Z,1478856171.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:51.144Z,1478856171.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:51.491Z,1478856171.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:51.544Z,1478856171.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:51.886Z,1478856171.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:51.947Z,1478856171.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:52.296Z,1478856172.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:52.336Z,1478856172.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:52.688Z,1478856172.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:52.724Z,1478856172.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:53.100Z,1478856173.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:53.123Z,1478856173.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:53.500Z,1478856173.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:53.548Z,1478856173.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:53.887Z,1478856173.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:53.904Z,1478856173.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:54.284Z,1478856174.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:54.342Z,1478856174.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:54.688Z,1478856174.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:54.714Z,1478856174.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:55.087Z,1478856175.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:55.121Z,1478856175.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:55.490Z,1478856175.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:55.518Z,1478856175.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:55.889Z,1478856175.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:55.929Z,1478856175.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:56.282Z,1478856176.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:56.300Z,1478856176.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:56.686Z,1478856176.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:56.704Z,1478856176.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:57.078Z,1478856177.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:57.094Z,1478856177.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:57.500Z,1478856177.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:57.561Z,1478856177.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:57.913Z,1478856177.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:57.920Z,1478856177.920 [PNI_TCM](ERROR): CRC does not match. Expected:0x42587 got:0x7490
2016-11-11T09:22:57.949Z,1478856177.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:58.331Z,1478856178.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:58.395Z,1478856178.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:58.744Z,1478856178.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:58.801Z,1478856178.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:59.081Z,1478856179.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:59.125Z,1478856179.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:59.477Z,1478856179.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:59.566Z,1478856179.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:22:59.889Z,1478856179.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:22:59.923Z,1478856179.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:00.294Z,1478856180.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:00.348Z,1478856180.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:00.679Z,1478856180.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:00.761Z,1478856180.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:01.079Z,1478856181.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:01.087Z,1478856181.087 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2016-11-11T09:23:01.138Z,1478856181.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:01.484Z,1478856181.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:01.545Z,1478856181.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:01.882Z,1478856181.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:01.947Z,1478856181.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:02.278Z,1478856182.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:02.327Z,1478856182.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:02.706Z,1478856182.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:02.825Z,1478856182.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:03.101Z,1478856183.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:03.121Z,1478856183.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:03.515Z,1478856183.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:03.539Z,1478856183.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:03.905Z,1478856183.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:03.945Z,1478856183.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:04.292Z,1478856184.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:04.321Z,1478856184.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:04.682Z,1478856184.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:04.722Z,1478856184.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:05.092Z,1478856185.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:05.137Z,1478856185.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:05.484Z,1478856185.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:05.533Z,1478856185.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:05.892Z,1478856185.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:05.898Z,1478856185.898 [PNI_TCM](ERROR): CRC does not match. Expected:0x45627 got:0x6336
2016-11-11T09:23:05.921Z,1478856185.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:06.280Z,1478856186.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:06.310Z,1478856186.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:06.682Z,1478856186.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:06.722Z,1478856186.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:07.087Z,1478856187.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:07.138Z,1478856187.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:07.491Z,1478856187.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:07.511Z,1478856187.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:07.696Z,1478856187.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:07.894Z,1478856187.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:07.921Z,1478856187.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:08.292Z,1478856188.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:08.311Z,1478856188.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:08.492Z,1478856188.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:08.695Z,1478856188.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:08.746Z,1478856188.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:09.093Z,1478856189.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:09.109Z,1478856189.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:09.480Z,1478856189.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:09.496Z,1478856189.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:09.881Z,1478856189.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:09.901Z,1478856189.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:10.279Z,1478856190.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:10.306Z,1478856190.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:10.684Z,1478856190.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:10.693Z,1478856190.693 [PNI_TCM](ERROR): CRC does not match. Expected:0x2253 got:0x49579
2016-11-11T09:23:10.725Z,1478856190.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:11.084Z,1478856191.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:11.113Z,1478856191.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:11.482Z,1478856191.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:11.505Z,1478856191.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:11.884Z,1478856191.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:11.901Z,1478856191.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:12.284Z,1478856192.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:12.300Z,1478856192.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:12.688Z,1478856192.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:12.741Z,1478856192.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:13.097Z,1478856193.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:13.112Z,1478856193.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:13.495Z,1478856193.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:13.511Z,1478856193.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:13.892Z,1478856193.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:13.909Z,1478856193.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:14.296Z,1478856194.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:14.337Z,1478856194.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:14.677Z,1478856194.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:14.699Z,1478856194.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:15.084Z,1478856195.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:15.099Z,1478856195.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:15.480Z,1478856195.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:15.525Z,1478856195.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:15.881Z,1478856195.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:15.901Z,1478856195.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:16.305Z,1478856196.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:16.346Z,1478856196.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:16.684Z,1478856196.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:16.708Z,1478856196.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:17.083Z,1478856197.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:17.130Z,1478856197.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:17.481Z,1478856197.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:17.496Z,1478856197.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:17.881Z,1478856197.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:17.901Z,1478856197.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:18.292Z,1478856198.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:18.308Z,1478856198.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:18.696Z,1478856198.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:18.717Z,1478856198.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:19.092Z,1478856199.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:19.108Z,1478856199.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:19.492Z,1478856199.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:19.508Z,1478856199.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:19.879Z,1478856199.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:19.901Z,1478856199.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:20.282Z,1478856200.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:20.297Z,1478856200.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:20.304Z,1478856200.304 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:20.304Z,1478856200.304 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 72
2016-11-11T09:23:20.304Z,1478856200.304 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:23:20.306Z,1478856200.306 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:20.306Z,1478856200.306 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 72
2016-11-11T09:23:20.306Z,1478856200.306 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:23:20.320Z,1478856200.320 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:23:20.321Z,1478856200.321 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:23:20.677Z,1478856200.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:20.697Z,1478856200.697 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:20.697Z,1478856200.697 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2016-11-11T09:23:20.697Z,1478856200.697 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:23:20.716Z,1478856200.717 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:23:20.717Z,1478856200.717 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:23:20.717Z,1478856200.717 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 72
2016-11-11T09:23:20.717Z,1478856200.717 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:23:20.717Z,1478856200.717 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 72
2016-11-11T09:23:21.081Z,1478856201.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:21.099Z,1478856201.099 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:23:21.100Z,1478856201.099 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:23:21.100Z,1478856201.100 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:23:21.100Z,1478856201.100 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:23:21.101Z,1478856201.101 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:23:21.101Z,1478856201.101 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:23:21.114Z,1478856201.114 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:23:21.115Z,1478856201.115 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2016-11-11T09:23:21.489Z,1478856201.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:21.503Z,1478856201.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:23:21.504Z,1478856201.504 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:23:21.504Z,1478856201.504 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:23:21.881Z,1478856201.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:21.901Z,1478856201.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:22.281Z,1478856202.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:22.296Z,1478856202.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:22.674Z,1478856202.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:22.690Z,1478856202.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:23.084Z,1478856203.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:23.099Z,1478856203.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:23.496Z,1478856203.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:23.517Z,1478856203.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:23.892Z,1478856203.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:23.908Z,1478856203.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:24.292Z,1478856204.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:24.309Z,1478856204.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:24.700Z,1478856204.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:24.729Z,1478856204.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:25.086Z,1478856205.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:25.101Z,1478856205.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:25.477Z,1478856205.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:25.497Z,1478856205.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:25.881Z,1478856205.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:25.897Z,1478856205.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:26.282Z,1478856206.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:26.298Z,1478856206.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:26.686Z,1478856206.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:26.710Z,1478856206.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:27.081Z,1478856207.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:27.101Z,1478856207.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:27.481Z,1478856207.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:27.501Z,1478856207.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:27.886Z,1478856207.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:27.925Z,1478856207.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:31.408Z,1478856211.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:31.450Z,1478856211.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:31.548Z,1478856211.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:31.566Z,1478856211.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:31.920Z,1478856211.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:31.970Z,1478856211.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:32.317Z,1478856212.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:32.341Z,1478856212.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:32.703Z,1478856212.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:32.771Z,1478856212.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:33.102Z,1478856213.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:33.145Z,1478856213.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:33.502Z,1478856213.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:33.529Z,1478856213.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:33.914Z,1478856213.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:33.934Z,1478856213.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:34.302Z,1478856214.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:34.333Z,1478856214.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:34.702Z,1478856214.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:34.733Z,1478856214.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:35.102Z,1478856215.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:35.177Z,1478856215.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:35.502Z,1478856215.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:35.530Z,1478856215.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:35.901Z,1478856215.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:35.933Z,1478856215.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:36.316Z,1478856216.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:36.340Z,1478856216.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:36.713Z,1478856216.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:36.737Z,1478856216.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:37.133Z,1478856217.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:37.212Z,1478856217.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:37.525Z,1478856217.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:37.549Z,1478856217.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:37.902Z,1478856217.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:37.929Z,1478856217.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:38.301Z,1478856218.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:38.327Z,1478856218.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:38.716Z,1478856218.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:38.752Z,1478856218.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:39.105Z,1478856219.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:39.131Z,1478856219.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:39.502Z,1478856219.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:39.534Z,1478856219.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:39.910Z,1478856219.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:39.945Z,1478856219.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:40.304Z,1478856220.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:40.341Z,1478856220.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:40.719Z,1478856220.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:40.761Z,1478856220.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:41.104Z,1478856221.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:41.133Z,1478856221.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:41.524Z,1478856221.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:41.539Z,1478856221.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:41.920Z,1478856221.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:41.941Z,1478856221.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:42.318Z,1478856222.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:42.333Z,1478856222.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:42.725Z,1478856222.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:42.750Z,1478856222.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:43.118Z,1478856223.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:43.133Z,1478856223.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:43.506Z,1478856223.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:43.572Z,1478856223.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:43.901Z,1478856223.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:43.929Z,1478856223.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:44.305Z,1478856224.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:44.321Z,1478856224.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:44.715Z,1478856224.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:44.739Z,1478856224.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:45.105Z,1478856225.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:45.169Z,1478856225.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:45.501Z,1478856225.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:45.545Z,1478856225.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:45.901Z,1478856225.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:45.938Z,1478856225.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:46.305Z,1478856226.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:46.357Z,1478856226.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:46.716Z,1478856226.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:46.790Z,1478856226.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:47.116Z,1478856227.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:47.169Z,1478856227.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:47.528Z,1478856227.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:47.584Z,1478856227.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:47.923Z,1478856227.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:47.959Z,1478856227.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:48.301Z,1478856228.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:48.333Z,1478856228.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:48.701Z,1478856228.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:48.741Z,1478856228.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:49.130Z,1478856229.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:49.185Z,1478856229.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:49.509Z,1478856229.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:49.542Z,1478856229.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:49.612Z,1478856229.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:49.905Z,1478856229.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:49.925Z,1478856229.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:50.302Z,1478856230.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:50.325Z,1478856230.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:50.408Z,1478856230.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:50.705Z,1478856230.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:50.737Z,1478856230.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:51.120Z,1478856231.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:51.172Z,1478856231.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:51.516Z,1478856231.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:51.552Z,1478856231.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:51.913Z,1478856231.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:51.945Z,1478856231.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:52.317Z,1478856232.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:52.345Z,1478856232.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:52.746Z,1478856232.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:52.761Z,1478856232.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:53.116Z,1478856233.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:53.153Z,1478856233.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:53.519Z,1478856233.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:53.534Z,1478856233.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:53.912Z,1478856233.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:53.929Z,1478856233.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:54.304Z,1478856234.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:54.338Z,1478856234.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:54.725Z,1478856234.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:54.760Z,1478856234.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:55.101Z,1478856235.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:55.134Z,1478856235.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:55.501Z,1478856235.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:55.538Z,1478856235.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:55.905Z,1478856235.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:55.945Z,1478856235.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:56.302Z,1478856236.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:56.346Z,1478856236.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:56.714Z,1478856236.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:56.756Z,1478856236.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:57.105Z,1478856237.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:57.128Z,1478856237.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:57.516Z,1478856237.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:57.537Z,1478856237.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:57.930Z,1478856237.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:57.997Z,1478856237.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:58.328Z,1478856238.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:58.344Z,1478856238.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:58.720Z,1478856238.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:58.759Z,1478856238.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:59.109Z,1478856239.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:59.146Z,1478856239.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:59.501Z,1478856239.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:59.553Z,1478856239.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:23:59.902Z,1478856239.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:23:59.933Z,1478856239.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:00.304Z,1478856240.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:00.338Z,1478856240.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:00.713Z,1478856240.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:00.809Z,1478856240.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:01.109Z,1478856241.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:01.129Z,1478856241.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:01.228Z,1478856241.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:01.504Z,1478856241.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:01.559Z,1478856241.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:01.909Z,1478856241.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:01.965Z,1478856241.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:02.024Z,1478856242.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:02.324Z,1478856242.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:02.339Z,1478856242.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:02.716Z,1478856242.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:02.744Z,1478856242.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:03.208Z,1478856243.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:03.241Z,1478856243.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:03.512Z,1478856243.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:03.550Z,1478856243.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:03.901Z,1478856243.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:03.921Z,1478856243.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:04.305Z,1478856244.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:04.325Z,1478856244.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:04.708Z,1478856244.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:04.729Z,1478856244.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:05.135Z,1478856245.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:05.184Z,1478856245.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:05.512Z,1478856245.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:05.527Z,1478856245.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:05.910Z,1478856245.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:05.924Z,1478856245.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:06.304Z,1478856246.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:06.332Z,1478856246.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:06.716Z,1478856246.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:06.744Z,1478856246.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:07.106Z,1478856247.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:07.143Z,1478856247.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:07.523Z,1478856247.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:07.539Z,1478856247.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:07.920Z,1478856247.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:07.944Z,1478856247.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:08.325Z,1478856248.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:08.341Z,1478856248.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:08.712Z,1478856248.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:08.734Z,1478856248.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:09.109Z,1478856249.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:09.136Z,1478856249.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:09.505Z,1478856249.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:09.537Z,1478856249.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:09.901Z,1478856249.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:09.938Z,1478856249.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:10.305Z,1478856250.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:10.325Z,1478856250.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:10.721Z,1478856250.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:10.748Z,1478856250.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:11.104Z,1478856251.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:11.138Z,1478856251.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:11.508Z,1478856251.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:11.524Z,1478856251.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:11.905Z,1478856251.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:11.932Z,1478856251.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:12.302Z,1478856252.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:12.333Z,1478856252.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:12.733Z,1478856252.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:12.781Z,1478856252.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:13.121Z,1478856253.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:13.136Z,1478856253.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:13.501Z,1478856253.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:13.533Z,1478856253.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:13.923Z,1478856253.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:13.985Z,1478856253.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:14.315Z,1478856254.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:14.350Z,1478856254.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:14.716Z,1478856254.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:14.821Z,1478856254.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:15.116Z,1478856255.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:15.137Z,1478856255.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:15.501Z,1478856255.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:15.550Z,1478856255.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:15.901Z,1478856255.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:15.979Z,1478856255.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:16.316Z,1478856256.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:16.337Z,1478856256.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:16.701Z,1478856256.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:16.734Z,1478856256.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:17.124Z,1478856257.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:17.153Z,1478856257.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:17.505Z,1478856257.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:17.525Z,1478856257.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:17.909Z,1478856257.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:17.924Z,1478856257.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:18.301Z,1478856258.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:18.327Z,1478856258.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:18.712Z,1478856258.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:18.733Z,1478856258.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:19.114Z,1478856259.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:19.192Z,1478856259.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:19.501Z,1478856259.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:19.533Z,1478856259.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:19.909Z,1478856259.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:19.935Z,1478856259.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:20.301Z,1478856260.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:20.338Z,1478856260.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:20.701Z,1478856260.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:20.738Z,1478856260.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:21.105Z,1478856261.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:21.133Z,1478856261.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:21.501Z,1478856261.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:21.545Z,1478856261.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:21.901Z,1478856261.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:21.941Z,1478856261.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:22.301Z,1478856262.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:22.321Z,1478856262.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:22.724Z,1478856262.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:22.750Z,1478856262.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:23.112Z,1478856263.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:23.149Z,1478856263.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:23.508Z,1478856263.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:23.523Z,1478856263.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:23.914Z,1478856263.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:23.929Z,1478856263.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:24.311Z,1478856264.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:24.327Z,1478856264.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:24.709Z,1478856264.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:24.729Z,1478856264.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:25.108Z,1478856265.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:25.136Z,1478856265.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:25.501Z,1478856265.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:25.533Z,1478856265.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:25.901Z,1478856265.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:25.933Z,1478856265.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:26.301Z,1478856266.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:26.319Z,1478856266.319 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T09:24:26.319Z,1478856266.319 [BPC1] Data Fault, FailCount= 1
2016-11-11T09:24:26.320Z,1478856266.320 [BPC1](ERROR): Data Fault
2016-11-11T09:24:26.342Z,1478856266.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:26.390Z,1478856266.390 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:24:26.741Z,1478856266.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:26.761Z,1478856266.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:27.120Z,1478856267.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:27.146Z,1478856267.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:27.502Z,1478856267.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:27.525Z,1478856267.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:27.560Z,1478856267.560 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:24:27.560Z,1478856267.560 [BPC1] No Fault, FailCount= 1
2016-11-11T09:24:27.905Z,1478856267.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:27.000Z,1478856268.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:31.508Z,1478856271.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:31.570Z,1478856271.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:31.676Z,1478856271.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:31.712Z,1478856271.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:32.041Z,1478856272.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:32.077Z,1478856272.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:32.438Z,1478856272.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:32.470Z,1478856272.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:32.837Z,1478856272.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:32.869Z,1478856272.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:33.245Z,1478856273.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:33.271Z,1478856273.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:33.637Z,1478856273.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:33.670Z,1478856273.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:34.038Z,1478856274.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:34.066Z,1478856274.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:34.438Z,1478856274.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:34.469Z,1478856274.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:34.837Z,1478856274.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:34.852Z,1478856274.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:35.241Z,1478856275.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:35.277Z,1478856275.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:35.656Z,1478856275.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:35.688Z,1478856275.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:36.052Z,1478856276.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:36.094Z,1478856276.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:36.452Z,1478856276.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:36.468Z,1478856276.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:36.860Z,1478856276.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:36.891Z,1478856276.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:37.245Z,1478856277.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:37.273Z,1478856277.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:37.637Z,1478856277.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:37.673Z,1478856277.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:38.037Z,1478856278.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:38.069Z,1478856278.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:38.437Z,1478856278.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:38.473Z,1478856278.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:38.845Z,1478856278.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:38.877Z,1478856278.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:39.241Z,1478856279.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:39.257Z,1478856279.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:39.641Z,1478856279.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:39.657Z,1478856279.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:40.049Z,1478856280.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:40.069Z,1478856280.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:40.440Z,1478856280.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:40.464Z,1478856280.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:40.864Z,1478856280.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:40.879Z,1478856280.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:41.255Z,1478856281.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:41.271Z,1478856281.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:41.654Z,1478856281.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:41.686Z,1478856281.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:42.060Z,1478856282.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:42.075Z,1478856282.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:42.443Z,1478856282.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:42.479Z,1478856282.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:42.846Z,1478856282.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:42.872Z,1478856282.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:43.238Z,1478856283.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:43.262Z,1478856283.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:43.638Z,1478856283.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:43.712Z,1478856283.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:44.037Z,1478856284.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:44.073Z,1478856284.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:44.446Z,1478856284.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:44.462Z,1478856284.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:44.850Z,1478856284.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:44.905Z,1478856284.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:45.244Z,1478856285.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:45.260Z,1478856285.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:45.646Z,1478856285.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:45.705Z,1478856285.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:46.059Z,1478856286.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:46.109Z,1478856286.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:46.452Z,1478856286.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:46.481Z,1478856286.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:46.857Z,1478856286.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:46.886Z,1478856286.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:47.255Z,1478856287.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:47.280Z,1478856287.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:47.645Z,1478856287.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:47.678Z,1478856287.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:48.041Z,1478856288.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:48.078Z,1478856288.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:48.437Z,1478856288.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:48.477Z,1478856288.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:48.845Z,1478856288.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:48.860Z,1478856288.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:49.245Z,1478856289.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:49.265Z,1478856289.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:49.644Z,1478856289.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:49.660Z,1478856289.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:50.044Z,1478856290.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:50.059Z,1478856290.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:50.445Z,1478856290.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:50.460Z,1478856290.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:50.838Z,1478856290.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:50.853Z,1478856290.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:51.251Z,1478856291.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:51.285Z,1478856291.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:51.652Z,1478856291.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:51.687Z,1478856291.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:52.052Z,1478856292.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:52.087Z,1478856292.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:52.452Z,1478856292.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:52.493Z,1478856292.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:52.849Z,1478856292.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:52.869Z,1478856292.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:53.240Z,1478856293.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:53.273Z,1478856293.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:53.645Z,1478856293.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:53.665Z,1478856293.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:54.044Z,1478856294.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:54.073Z,1478856294.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:54.449Z,1478856294.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:54.469Z,1478856294.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:54.853Z,1478856294.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:54.877Z,1478856294.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:55.249Z,1478856295.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:55.280Z,1478856295.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:55.641Z,1478856295.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:55.665Z,1478856295.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:56.040Z,1478856296.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:56.063Z,1478856296.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:56.455Z,1478856296.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:56.477Z,1478856296.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:56.855Z,1478856296.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:56.871Z,1478856296.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:57.259Z,1478856297.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:57.274Z,1478856297.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:57.664Z,1478856297.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:57.679Z,1478856297.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:58.037Z,1478856298.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:58.113Z,1478856298.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:58.437Z,1478856298.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:58.457Z,1478856298.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:58.838Z,1478856298.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:58.857Z,1478856298.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:59.242Z,1478856299.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:59.289Z,1478856299.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:24:59.643Z,1478856299.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:24:59.658Z,1478856299.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:00.041Z,1478856300.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:00.094Z,1478856300.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:00.441Z,1478856300.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:00.491Z,1478856300.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:00.840Z,1478856300.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:00.861Z,1478856300.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:01.249Z,1478856301.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:01.264Z,1478856301.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:01.656Z,1478856301.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:01.691Z,1478856301.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:02.048Z,1478856302.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:02.069Z,1478856302.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:02.454Z,1478856302.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:02.469Z,1478856302.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:02.852Z,1478856302.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:02.878Z,1478856302.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:03.237Z,1478856303.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:03.269Z,1478856303.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:03.646Z,1478856303.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:03.685Z,1478856303.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:04.037Z,1478856304.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:04.057Z,1478856304.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:04.443Z,1478856304.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:04.458Z,1478856304.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:04.846Z,1478856304.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:04.883Z,1478856304.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:05.237Z,1478856305.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:05.277Z,1478856305.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:05.637Z,1478856305.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:05.657Z,1478856305.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:06.038Z,1478856306.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:06.057Z,1478856306.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:06.438Z,1478856306.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:06.471Z,1478856306.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:06.867Z,1478856306.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:06.883Z,1478856306.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:07.265Z,1478856307.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:07.281Z,1478856307.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:07.656Z,1478856307.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:07.690Z,1478856307.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:08.048Z,1478856308.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:08.090Z,1478856308.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:08.442Z,1478856308.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:08.458Z,1478856308.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:08.837Z,1478856308.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:08.881Z,1478856308.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:09.237Z,1478856309.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:09.253Z,1478856309.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:09.642Z,1478856309.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:09.658Z,1478856309.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:10.045Z,1478856310.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:10.065Z,1478856310.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:10.443Z,1478856310.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:10.465Z,1478856310.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:10.849Z,1478856310.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:10.869Z,1478856310.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:11.240Z,1478856311.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:11.279Z,1478856311.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:11.640Z,1478856311.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:11.670Z,1478856311.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:12.056Z,1478856312.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:12.071Z,1478856312.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:12.455Z,1478856312.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:12.472Z,1478856312.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:12.864Z,1478856312.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:12.929Z,1478856312.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:13.248Z,1478856313.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:13.282Z,1478856313.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:13.637Z,1478856313.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:13.695Z,1478856313.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:14.040Z,1478856314.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:14.061Z,1478856314.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:14.445Z,1478856314.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:14.509Z,1478856314.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:14.843Z,1478856314.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:14.896Z,1478856314.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:15.249Z,1478856315.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:15.269Z,1478856315.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:15.645Z,1478856315.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:15.660Z,1478856315.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:16.041Z,1478856316.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:16.074Z,1478856316.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:16.444Z,1478856316.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:16.461Z,1478856316.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:16.849Z,1478856316.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:16.878Z,1478856316.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:17.259Z,1478856317.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:17.278Z,1478856317.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:17.656Z,1478856317.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:17.677Z,1478856317.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:18.057Z,1478856318.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:18.095Z,1478856318.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:18.448Z,1478856318.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:18.486Z,1478856318.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:18.845Z,1478856318.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:18.885Z,1478856318.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:19.237Z,1478856319.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:19.276Z,1478856319.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:19.637Z,1478856319.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:19.657Z,1478856319.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:20.037Z,1478856320.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:20.065Z,1478856320.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:20.447Z,1478856320.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:20.467Z,1478856320.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:20.850Z,1478856320.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:20.876Z,1478856320.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:21.238Z,1478856321.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:21.269Z,1478856321.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:21.637Z,1478856321.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:21.662Z,1478856321.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:22.037Z,1478856322.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:22.077Z,1478856322.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:22.465Z,1478856322.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:22.481Z,1478856322.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:22.856Z,1478856322.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:22.890Z,1478856322.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:23.252Z,1478856323.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:23.287Z,1478856323.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:23.663Z,1478856323.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:23.693Z,1478856323.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:24.041Z,1478856324.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:24.084Z,1478856324.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:24.442Z,1478856324.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:24.481Z,1478856324.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:24.849Z,1478856324.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:24.887Z,1478856324.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:25.250Z,1478856325.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:25.297Z,1478856325.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:25.641Z,1478856325.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:25.701Z,1478856325.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:26.037Z,1478856326.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:26.070Z,1478856326.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:26.437Z,1478856326.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:26.474Z,1478856326.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:26.841Z,1478856326.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:26.905Z,1478856326.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:27.250Z,1478856327.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:27.325Z,1478856327.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:27.660Z,1478856327.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:27.686Z,1478856327.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:28.052Z,1478856328.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:28.069Z,1478856328.069 [PNI_TCM](ERROR): CRC does not match. Expected:0x28140 got:0x65073
2016-11-11T09:25:28.113Z,1478856328.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:31.484Z,1478856331.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:31.537Z,1478856331.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:31.656Z,1478856331.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:31.683Z,1478856331.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:32.020Z,1478856332.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:32.077Z,1478856332.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:32.421Z,1478856332.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:32.492Z,1478856332.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:32.834Z,1478856332.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:32.852Z,1478856332.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:33.233Z,1478856333.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:33.253Z,1478856333.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:33.637Z,1478856333.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:33.662Z,1478856333.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:34.028Z,1478856334.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:34.065Z,1478856334.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:34.413Z,1478856334.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:34.457Z,1478856334.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:34.822Z,1478856334.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:34.839Z,1478856334.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:35.216Z,1478856335.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:35.253Z,1478856335.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:35.613Z,1478856335.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:35.647Z,1478856335.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:36.014Z,1478856336.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:36.053Z,1478856336.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:36.414Z,1478856336.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:36.453Z,1478856336.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:36.817Z,1478856336.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:36.853Z,1478856336.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:37.213Z,1478856337.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:37.257Z,1478856337.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:37.618Z,1478856337.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:37.637Z,1478856337.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:38.038Z,1478856338.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:38.062Z,1478856338.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:38.434Z,1478856338.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:38.464Z,1478856338.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:38.840Z,1478856338.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:38.868Z,1478856338.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:39.236Z,1478856339.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:39.263Z,1478856339.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:39.625Z,1478856339.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:39.659Z,1478856339.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:40.022Z,1478856340.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:40.034Z,1478856340.034 [PNI_TCM](ERROR): CRC does not match. Expected:0x20708 got:0x16913
2016-11-11T09:25:40.074Z,1478856340.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:40.421Z,1478856340.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:40.463Z,1478856340.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:40.822Z,1478856340.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:40.860Z,1478856340.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:41.227Z,1478856341.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:41.245Z,1478856341.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:41.623Z,1478856341.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:41.673Z,1478856341.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:42.016Z,1478856342.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:42.042Z,1478856342.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:42.416Z,1478856342.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:42.454Z,1478856342.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:42.813Z,1478856342.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:42.853Z,1478856342.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:43.236Z,1478856343.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:43.258Z,1478856343.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:43.624Z,1478856343.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:43.657Z,1478856343.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:44.028Z,1478856344.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:44.065Z,1478856344.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:44.430Z,1478856344.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:44.517Z,1478856344.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:44.824Z,1478856344.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:44.897Z,1478856344.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:45.224Z,1478856345.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:45.271Z,1478856345.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:45.622Z,1478856345.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:45.675Z,1478856345.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:46.018Z,1478856346.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:46.044Z,1478856346.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:46.423Z,1478856346.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:46.506Z,1478856346.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:46.814Z,1478856346.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:46.871Z,1478856346.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:47.224Z,1478856347.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:47.248Z,1478856347.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:47.613Z,1478856347.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:47.647Z,1478856347.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:48.016Z,1478856348.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:48.049Z,1478856348.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:48.436Z,1478856348.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:48.496Z,1478856348.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:48.830Z,1478856348.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:48.856Z,1478856348.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:49.229Z,1478856349.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:49.265Z,1478856349.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:49.639Z,1478856349.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:49.655Z,1478856349.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:50.022Z,1478856350.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:50.057Z,1478856350.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:50.414Z,1478856350.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:50.493Z,1478856350.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:50.823Z,1478856350.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:50.839Z,1478856350.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:51.224Z,1478856351.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:51.248Z,1478856351.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:51.621Z,1478856351.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:51.646Z,1478856351.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:52.023Z,1478856352.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:52.046Z,1478856352.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:52.428Z,1478856352.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:52.453Z,1478856352.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:52.824Z,1478856352.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:52.857Z,1478856352.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:52.901Z,1478856352.901 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T09:25:53.222Z,1478856353.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:53.253Z,1478856353.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:53.645Z,1478856353.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:53.652Z,1478856353.652 [PNI_TCM](ERROR): CRC does not match. Expected:0x14214 got:0x14581
2016-11-11T09:25:53.677Z,1478856353.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:54.029Z,1478856354.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:54.057Z,1478856354.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:54.416Z,1478856354.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:54.444Z,1478856354.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:54.818Z,1478856354.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:54.860Z,1478856354.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:55.220Z,1478856355.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:55.236Z,1478856355.236 [PNI_TCM](ERROR): CRC does not match. Expected:0x15711 got:0x6336
2016-11-11T09:25:55.265Z,1478856355.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:55.623Z,1478856355.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:55.642Z,1478856355.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:56.033Z,1478856356.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:56.048Z,1478856356.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:56.435Z,1478856356.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:56.458Z,1478856356.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:56.818Z,1478856356.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:56.847Z,1478856356.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:57.224Z,1478856357.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:57.265Z,1478856357.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:57.619Z,1478856357.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:57.654Z,1478856357.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:58.023Z,1478856358.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:58.069Z,1478856358.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:58.438Z,1478856358.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:58.544Z,1478856358.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:58.821Z,1478856358.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:58.869Z,1478856358.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:59.213Z,1478856359.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:59.245Z,1478856359.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:25:59.628Z,1478856359.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:25:59.684Z,1478856359.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:00.032Z,1478856360.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:00.047Z,1478856360.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:00.416Z,1478856360.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:00.514Z,1478856360.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:00.821Z,1478856360.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:00.878Z,1478856360.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:01.224Z,1478856361.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:01.239Z,1478856361.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:01.619Z,1478856361.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:01.643Z,1478856361.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:02.028Z,1478856362.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:02.044Z,1478856362.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:02.444Z,1478856362.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:02.510Z,1478856362.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:02.820Z,1478856362.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:02.852Z,1478856362.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:03.215Z,1478856363.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:03.231Z,1478856363.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:03.631Z,1478856363.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:03.664Z,1478856363.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:04.024Z,1478856364.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:04.048Z,1478856364.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:04.427Z,1478856364.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:04.485Z,1478856364.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:04.824Z,1478856364.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:04.839Z,1478856364.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:05.221Z,1478856365.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:05.237Z,1478856365.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:05.628Z,1478856365.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:05.643Z,1478856365.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:06.025Z,1478856366.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:06.040Z,1478856366.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:06.419Z,1478856366.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:06.451Z,1478856366.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:06.825Z,1478856366.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:06.861Z,1478856366.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:07.222Z,1478856367.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:07.269Z,1478856367.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:07.629Z,1478856367.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:07.654Z,1478856367.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:08.030Z,1478856368.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:08.045Z,1478856368.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:08.417Z,1478856368.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:08.440Z,1478856368.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:08.834Z,1478856368.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:08.850Z,1478856368.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:09.244Z,1478856369.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:09.271Z,1478856369.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:09.618Z,1478856369.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:09.633Z,1478856369.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:10.021Z,1478856370.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:10.041Z,1478856370.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:10.420Z,1478856370.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:10.435Z,1478856370.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:10.828Z,1478856370.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:10.843Z,1478856370.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:11.218Z,1478856371.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:11.242Z,1478856371.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:11.624Z,1478856371.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:11.640Z,1478856371.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:12.026Z,1478856372.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:12.042Z,1478856372.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:12.423Z,1478856372.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:12.471Z,1478856372.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:12.818Z,1478856372.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:12.913Z,1478856372.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:13.228Z,1478856373.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:13.253Z,1478856373.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:13.624Z,1478856373.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:13.648Z,1478856373.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:14.020Z,1478856374.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:14.069Z,1478856374.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:14.476Z,1478856374.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:14.530Z,1478856374.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:14.816Z,1478856374.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:14.863Z,1478856374.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:15.224Z,1478856375.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:15.276Z,1478856375.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:15.624Z,1478856375.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:15.639Z,1478856375.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:16.016Z,1478856376.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:16.049Z,1478856376.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:16.448Z,1478856376.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:16.491Z,1478856376.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:16.813Z,1478856376.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:16.845Z,1478856376.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:17.215Z,1478856377.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:17.249Z,1478856377.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:17.640Z,1478856377.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:17.655Z,1478856377.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:18.037Z,1478856378.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:18.052Z,1478856378.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:18.461Z,1478856378.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:18.499Z,1478856378.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:18.828Z,1478856378.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:18.865Z,1478856378.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:19.217Z,1478856379.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:19.232Z,1478856379.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:19.613Z,1478856379.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:19.633Z,1478856379.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:20.018Z,1478856380.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:20.049Z,1478856380.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:20.422Z,1478856380.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:20.437Z,1478856380.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:20.813Z,1478856380.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:20.833Z,1478856380.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:21.217Z,1478856381.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:21.237Z,1478856381.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:21.264Z,1478856381.264 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:21.264Z,1478856381.264 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 73
2016-11-11T09:26:21.264Z,1478856381.264 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:26:21.266Z,1478856381.266 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:21.266Z,1478856381.266 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 73
2016-11-11T09:26:21.266Z,1478856381.266 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:26:21.293Z,1478856381.293 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:26:21.293Z,1478856381.293 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:26:21.617Z,1478856381.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:21.637Z,1478856381.637 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:21.637Z,1478856381.637 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2016-11-11T09:26:21.637Z,1478856381.637 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:26:21.701Z,1478856381.701 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:26:21.701Z,1478856381.701 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:26:21.701Z,1478856381.701 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 73
2016-11-11T09:26:21.702Z,1478856381.702 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:26:21.702Z,1478856381.702 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 73
2016-11-11T09:26:21.768Z,1478856381.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:22.016Z,1478856382.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:22.047Z,1478856382.047 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:26:22.051Z,1478856382.051 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:26:22.052Z,1478856382.052 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:26:22.052Z,1478856382.052 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:26:22.053Z,1478856382.053 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:26:22.053Z,1478856382.053 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:26:22.079Z,1478856382.079 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:26:22.079Z,1478856382.079 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2016-11-11T09:26:22.430Z,1478856382.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:22.453Z,1478856382.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:26:22.453Z,1478856382.453 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:26:22.453Z,1478856382.453 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:26:22.564Z,1478856382.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:22.836Z,1478856382.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:22.885Z,1478856382.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:23.221Z,1478856383.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:23.258Z,1478856383.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:23.617Z,1478856383.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:23.649Z,1478856383.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:24.013Z,1478856384.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:24.050Z,1478856384.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:24.417Z,1478856384.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:24.449Z,1478856384.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:24.813Z,1478856384.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:24.884Z,1478856384.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:25.221Z,1478856385.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:25.250Z,1478856385.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:25.614Z,1478856385.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:25.654Z,1478856385.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:26.018Z,1478856386.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:26.045Z,1478856386.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:26.455Z,1478856386.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:26.503Z,1478856386.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:26.828Z,1478856386.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:26.852Z,1478856386.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:27.232Z,1478856387.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:27.289Z,1478856387.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:27.307Z,1478856387.307 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T09:21:26.9Z
2016-11-11T09:26:27.311Z,1478856387.311 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T09:26:27.311Z,1478856387.311 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T09:26:27.628Z,1478856387.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:27.689Z,1478856387.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:28.536Z,1478856388.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:28.552Z,1478856388.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:28.665Z,1478856388.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:28.701Z,1478856388.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:32.112Z,1478856392.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:32.169Z,1478856392.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:32.225Z,1478856392.224 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0108.lzma
2016-11-11T09:26:32.273Z,1478856392.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:32.310Z,1478856392.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:32.665Z,1478856392.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:32.713Z,1478856392.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:33.017Z,1478856393.017 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0108.lzma.bak
2016-11-11T09:26:33.017Z,1478856393.017 [DataOverHttps](INFO): SBD MOMSN=4555276
2016-11-11T09:26:33.071Z,1478856393.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:33.110Z,1478856393.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:34.303Z,1478856394.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:34.326Z,1478856394.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:34.419Z,1478856394.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:34.446Z,1478856394.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:35.756Z,1478856395.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:36.552Z,1478856396.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:37.830Z,1478856397.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:37.845Z,1478856397.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:37.959Z,1478856397.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:37.983Z,1478856397.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:38.328Z,1478856398.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:38.380Z,1478856398.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:38.742Z,1478856398.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:38.748Z,1478856398.748 [PNI_TCM](ERROR): CRC does not match. Expected:0x26284 got:0x4403
2016-11-11T09:26:38.775Z,1478856398.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:39.140Z,1478856399.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:39.155Z,1478856399.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:39.546Z,1478856399.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:39.565Z,1478856399.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:43.190Z,1478856403.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:43.206Z,1478856403.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:43.271Z,1478856403.271 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20161111T044527/Express0109.lzma
2016-11-11T09:26:43.297Z,1478856403.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:43.338Z,1478856403.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:43.698Z,1478856403.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:43.713Z,1478856403.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:44.069Z,1478856404.069 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0109.lzma.bak
2016-11-11T09:26:44.069Z,1478856404.069 [DataOverHttps](INFO): SBD MOMSN=4555278
2016-11-11T09:26:44.099Z,1478856404.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:44.144Z,1478856404.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:45.377Z,1478856405.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:45.469Z,1478856405.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:45.486Z,1478856405.486 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T09:26:45.486Z,1478856405.486 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T09:26:45.486Z,1478856405.486 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T09:26:45.559Z,1478856405.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:45.591Z,1478856405.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:49.172Z,1478856409.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:49.225Z,1478856409.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:49.336Z,1478856409.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:49.373Z,1478856409.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:49.681Z,1478856409.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:49.737Z,1478856409.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:50.077Z,1478856410.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:50.133Z,1478856410.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:50.476Z,1478856410.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:50.491Z,1478856410.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:50.892Z,1478856410.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:50.930Z,1478856410.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:51.278Z,1478856411.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:51.297Z,1478856411.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:51.681Z,1478856411.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:51.701Z,1478856411.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:52.087Z,1478856412.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:52.109Z,1478856412.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:52.484Z,1478856412.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:52.499Z,1478856412.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:52.886Z,1478856412.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:52.910Z,1478856412.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:53.282Z,1478856413.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:53.305Z,1478856413.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:53.674Z,1478856413.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:53.720Z,1478856413.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:54.073Z,1478856414.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:54.109Z,1478856414.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:54.473Z,1478856414.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:54.517Z,1478856414.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:54.874Z,1478856414.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:54.913Z,1478856414.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:55.273Z,1478856415.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:55.293Z,1478856415.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:55.679Z,1478856415.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:55.693Z,1478856415.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:56.080Z,1478856416.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:56.095Z,1478856416.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:56.496Z,1478856416.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:56.527Z,1478856416.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:56.892Z,1478856416.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:56.924Z,1478856416.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:57.288Z,1478856417.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:57.303Z,1478856417.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:57.686Z,1478856417.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:57.706Z,1478856417.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:58.080Z,1478856418.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:58.096Z,1478856418.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:58.485Z,1478856418.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:58.513Z,1478856418.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:58.874Z,1478856418.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:58.904Z,1478856418.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:59.289Z,1478856419.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:59.305Z,1478856419.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:26:59.674Z,1478856419.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:26:59.719Z,1478856419.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:00.073Z,1478856420.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:00.109Z,1478856420.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:00.481Z,1478856420.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:00.507Z,1478856420.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:00.873Z,1478856420.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:00.910Z,1478856420.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:01.298Z,1478856421.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:01.307Z,1478856421.307 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T09:27:01.307Z,1478856421.307 [BPC1] Data Fault, FailCount= 1
2016-11-11T09:27:01.307Z,1478856421.307 [BPC1](ERROR): Data Fault
2016-11-11T09:27:01.320Z,1478856421.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:01.363Z,1478856421.364 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:27:01.701Z,1478856421.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:01.717Z,1478856421.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:02.068Z,1478856422.068 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T09:27:02.085Z,1478856422.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:02.120Z,1478856422.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:02.487Z,1478856422.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:02.536Z,1478856422.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:02.574Z,1478856422.574 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:27:02.574Z,1478856422.574 [BPC1] No Fault, FailCount= 1
2016-11-11T09:27:02.881Z,1478856422.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:02.968Z,1478856422.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:03.280Z,1478856423.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:03.327Z,1478856423.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:03.679Z,1478856423.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:03.695Z,1478856423.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:04.079Z,1478856424.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:04.095Z,1478856424.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:04.480Z,1478856424.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:04.495Z,1478856424.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:04.900Z,1478856424.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:04.932Z,1478856424.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:05.281Z,1478856425.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:05.297Z,1478856425.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:05.681Z,1478856425.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:05.701Z,1478856425.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:06.087Z,1478856426.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:06.102Z,1478856426.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:06.473Z,1478856426.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:06.507Z,1478856426.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:06.887Z,1478856426.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:06.904Z,1478856426.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:07.288Z,1478856427.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:07.310Z,1478856427.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:07.656Z,1478856427.656 [NAL9602](INFO): Powering down
2016-11-11T09:27:07.675Z,1478856427.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:07.717Z,1478856427.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:08.077Z,1478856428.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:08.093Z,1478856428.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:08.485Z,1478856428.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:08.505Z,1478856428.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:08.876Z,1478856428.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:08.910Z,1478856428.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:09.281Z,1478856429.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:09.296Z,1478856429.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:09.681Z,1478856429.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:09.703Z,1478856429.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:10.079Z,1478856430.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:10.102Z,1478856430.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:10.476Z,1478856430.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:10.509Z,1478856430.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:10.882Z,1478856430.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:10.906Z,1478856430.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:11.273Z,1478856431.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:11.308Z,1478856431.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:11.674Z,1478856431.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:11.705Z,1478856431.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:12.074Z,1478856432.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:12.110Z,1478856432.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:12.482Z,1478856432.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:12.508Z,1478856432.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:12.873Z,1478856432.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:12.910Z,1478856432.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:13.273Z,1478856433.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:13.310Z,1478856433.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:13.673Z,1478856433.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:13.689Z,1478856433.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:14.073Z,1478856434.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:14.089Z,1478856434.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:14.489Z,1478856434.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:14.520Z,1478856434.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:14.885Z,1478856434.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:14.942Z,1478856434.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:15.273Z,1478856435.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:15.342Z,1478856435.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:15.680Z,1478856435.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:15.743Z,1478856435.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:16.079Z,1478856436.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:16.094Z,1478856436.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:16.495Z,1478856436.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:16.518Z,1478856436.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:16.891Z,1478856436.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:16.944Z,1478856436.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:17.288Z,1478856437.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:17.303Z,1478856437.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:17.674Z,1478856437.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:17.745Z,1478856437.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:18.073Z,1478856438.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:18.099Z,1478856438.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:18.474Z,1478856438.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:18.550Z,1478856438.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:18.874Z,1478856438.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:18.911Z,1478856438.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:19.273Z,1478856439.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:19.310Z,1478856439.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:19.677Z,1478856439.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:19.709Z,1478856439.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:20.073Z,1478856440.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:20.110Z,1478856440.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:20.473Z,1478856440.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:20.509Z,1478856440.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:20.873Z,1478856440.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:20.916Z,1478856440.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:21.273Z,1478856441.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:21.309Z,1478856441.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:21.673Z,1478856441.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:21.697Z,1478856441.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:22.073Z,1478856442.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:22.088Z,1478856442.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:22.478Z,1478856442.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:22.493Z,1478856442.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:22.877Z,1478856442.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:22.932Z,1478856442.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:23.281Z,1478856443.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:23.296Z,1478856443.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:23.676Z,1478856443.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:23.691Z,1478856443.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:24.079Z,1478856444.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:24.094Z,1478856444.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:24.485Z,1478856444.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:24.500Z,1478856444.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:24.880Z,1478856444.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:24.895Z,1478856444.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:25.280Z,1478856445.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:25.296Z,1478856445.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:25.679Z,1478856445.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:25.701Z,1478856445.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:26.076Z,1478856446.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:26.107Z,1478856446.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:26.488Z,1478856446.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:26.509Z,1478856446.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:26.880Z,1478856446.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:26.896Z,1478856446.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:27.273Z,1478856447.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:27.391Z,1478856447.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:27.670Z,1478856447.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:27.705Z,1478856447.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:28.073Z,1478856448.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:28.105Z,1478856448.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:28.473Z,1478856448.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:28.509Z,1478856448.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:28.876Z,1478856448.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:28.892Z,1478856448.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:29.285Z,1478856449.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:29.300Z,1478856449.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:29.680Z,1478856449.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:29.701Z,1478856449.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:30.080Z,1478856450.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:30.141Z,1478856450.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:30.480Z,1478856450.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:30.517Z,1478856450.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:30.873Z,1478856450.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:30.938Z,1478856450.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:31.273Z,1478856451.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:31.293Z,1478856451.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:31.673Z,1478856451.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:31.729Z,1478856451.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:32.078Z,1478856452.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:32.093Z,1478856452.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:32.478Z,1478856452.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:32.525Z,1478856452.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:32.885Z,1478856452.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:32.937Z,1478856452.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:33.279Z,1478856453.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:33.295Z,1478856453.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:33.680Z,1478856453.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:33.696Z,1478856453.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:34.084Z,1478856454.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:34.100Z,1478856454.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:34.479Z,1478856454.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:34.501Z,1478856454.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:34.888Z,1478856454.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:34.904Z,1478856454.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:35.291Z,1478856455.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:35.307Z,1478856455.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:35.673Z,1478856455.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:35.698Z,1478856455.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:36.073Z,1478856456.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:36.109Z,1478856456.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:36.481Z,1478856456.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:36.507Z,1478856456.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:36.877Z,1478856456.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:36.909Z,1478856456.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:37.273Z,1478856457.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:37.301Z,1478856457.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:37.677Z,1478856457.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:37.709Z,1478856457.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:38.073Z,1478856458.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:38.110Z,1478856458.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:38.487Z,1478856458.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:38.503Z,1478856458.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:38.880Z,1478856458.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:38.903Z,1478856458.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:39.281Z,1478856459.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:39.301Z,1478856459.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:39.681Z,1478856459.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:39.697Z,1478856459.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:40.088Z,1478856460.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:40.104Z,1478856460.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:40.489Z,1478856460.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:40.504Z,1478856460.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:40.873Z,1478856460.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:40.905Z,1478856460.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:41.277Z,1478856461.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:41.303Z,1478856461.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:41.673Z,1478856461.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:41.712Z,1478856461.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:42.073Z,1478856462.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:42.105Z,1478856462.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:42.481Z,1478856462.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:42.507Z,1478856462.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:42.873Z,1478856462.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:42.909Z,1478856462.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:43.273Z,1478856463.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:43.305Z,1478856463.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:43.673Z,1478856463.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:43.709Z,1478856463.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:44.073Z,1478856464.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:44.109Z,1478856464.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:44.494Z,1478856464.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:44.510Z,1478856464.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:44.873Z,1478856464.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:44.913Z,1478856464.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:45.273Z,1478856465.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:45.348Z,1478856465.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:45.677Z,1478856465.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:45.697Z,1478856465.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:46.086Z,1478856466.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:46.141Z,1478856466.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:52.991Z,1478856472.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:53.020Z,1478856473.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:53.192Z,1478856473.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:53.250Z,1478856473.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:53.561Z,1478856473.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:53.590Z,1478856473.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:53.959Z,1478856473.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:54.030Z,1478856474.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:54.350Z,1478856474.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:54.389Z,1478856474.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:54.751Z,1478856474.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:54.798Z,1478856474.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:55.158Z,1478856475.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:55.203Z,1478856475.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:55.558Z,1478856475.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:55.584Z,1478856475.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:55.979Z,1478856475.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:56.025Z,1478856476.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:56.349Z,1478856476.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:56.417Z,1478856476.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:56.775Z,1478856476.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:56.792Z,1478856476.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:57.153Z,1478856477.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:57.178Z,1478856477.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:57.549Z,1478856477.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:57.576Z,1478856477.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:57.975Z,1478856477.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:57.993Z,1478856477.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:58.364Z,1478856478.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:58.410Z,1478856478.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:58.756Z,1478856478.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:58.777Z,1478856478.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:59.156Z,1478856479.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:59.172Z,1478856479.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:59.564Z,1478856479.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:59.579Z,1478856479.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:27:59.956Z,1478856479.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:27:59.971Z,1478856479.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:00.350Z,1478856480.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:00.370Z,1478856480.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:00.784Z,1478856480.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:00.815Z,1478856480.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:01.156Z,1478856481.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:01.157Z,1478856481.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:01.200Z,1478856481.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:01.556Z,1478856481.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:01.572Z,1478856481.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:01.952Z,1478856481.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:01.964Z,1478856481.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:01.992Z,1478856481.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:02.349Z,1478856482.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:02.392Z,1478856482.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:02.754Z,1478856482.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:02.817Z,1478856482.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:03.153Z,1478856483.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:03.205Z,1478856483.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:03.549Z,1478856483.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:03.565Z,1478856483.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:03.949Z,1478856483.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:03.981Z,1478856483.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:04.356Z,1478856484.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:04.377Z,1478856484.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:04.765Z,1478856484.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:04.806Z,1478856484.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:05.160Z,1478856485.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:05.214Z,1478856485.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:05.551Z,1478856485.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:05.600Z,1478856485.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:05.951Z,1478856485.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:06.026Z,1478856486.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:06.350Z,1478856486.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:06.389Z,1478856486.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:06.759Z,1478856486.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:06.816Z,1478856486.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:07.151Z,1478856487.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:07.194Z,1478856487.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:07.551Z,1478856487.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:07.614Z,1478856487.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:07.959Z,1478856487.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:08.026Z,1478856488.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:08.351Z,1478856488.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:08.389Z,1478856488.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:08.751Z,1478856488.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:08.785Z,1478856488.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:09.151Z,1478856489.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:09.167Z,1478856489.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:09.560Z,1478856489.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:09.611Z,1478856489.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:09.951Z,1478856489.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:09.991Z,1478856489.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:10.384Z,1478856490.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:10.412Z,1478856490.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:10.751Z,1478856490.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:10.793Z,1478856490.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:11.159Z,1478856491.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:11.178Z,1478856491.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:11.561Z,1478856491.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:11.586Z,1478856491.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:11.951Z,1478856491.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:11.993Z,1478856491.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:12.379Z,1478856492.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:12.449Z,1478856492.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:12.750Z,1478856492.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:12.782Z,1478856492.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:13.157Z,1478856493.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:13.230Z,1478856493.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:13.551Z,1478856493.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:13.600Z,1478856493.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:13.951Z,1478856493.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:13.991Z,1478856493.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:14.355Z,1478856494.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:14.371Z,1478856494.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:14.762Z,1478856494.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:14.792Z,1478856494.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:15.152Z,1478856495.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:15.184Z,1478856495.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:15.562Z,1478856495.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:15.581Z,1478856495.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:15.950Z,1478856495.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:15.989Z,1478856495.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:16.349Z,1478856496.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:16.378Z,1478856496.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:16.752Z,1478856496.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:16.802Z,1478856496.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:17.149Z,1478856497.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:17.166Z,1478856497.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:17.549Z,1478856497.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:17.615Z,1478856497.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:17.949Z,1478856497.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:17.970Z,1478856497.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:18.356Z,1478856498.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:18.373Z,1478856498.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:18.764Z,1478856498.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:18.781Z,1478856498.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:19.149Z,1478856499.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:19.183Z,1478856499.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:19.560Z,1478856499.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:19.576Z,1478856499.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:19.949Z,1478856499.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:20.021Z,1478856500.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:20.357Z,1478856500.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:20.394Z,1478856500.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:20.756Z,1478856500.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:20.809Z,1478856500.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:21.155Z,1478856501.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:21.177Z,1478856501.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:21.556Z,1478856501.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:21.608Z,1478856501.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:21.957Z,1478856501.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:22.062Z,1478856502.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:22.361Z,1478856502.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:22.376Z,1478856502.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:22.755Z,1478856502.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:22.774Z,1478856502.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:23.156Z,1478856503.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:23.172Z,1478856503.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:23.557Z,1478856503.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:23.577Z,1478856503.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:23.949Z,1478856503.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:23.983Z,1478856503.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:24.349Z,1478856504.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:24.381Z,1478856504.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:24.749Z,1478856504.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:24.785Z,1478856504.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:25.149Z,1478856505.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:25.183Z,1478856505.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:25.549Z,1478856505.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:25.575Z,1478856505.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:25.949Z,1478856505.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:25.985Z,1478856505.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:26.360Z,1478856506.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:26.392Z,1478856506.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:26.749Z,1478856506.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:26.782Z,1478856506.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:27.149Z,1478856507.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:27.194Z,1478856507.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:27.549Z,1478856507.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:27.586Z,1478856507.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:27.949Z,1478856507.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:27.980Z,1478856507.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:28.352Z,1478856508.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:28.367Z,1478856508.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:28.761Z,1478856508.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:28.777Z,1478856508.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:29.160Z,1478856509.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:29.176Z,1478856509.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:29.556Z,1478856509.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:29.572Z,1478856509.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:29.963Z,1478856509.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:29.978Z,1478856509.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:30.357Z,1478856510.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:30.373Z,1478856510.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:30.763Z,1478856510.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:30.779Z,1478856510.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:31.149Z,1478856511.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:31.183Z,1478856511.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:31.549Z,1478856511.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:31.584Z,1478856511.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:31.949Z,1478856511.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:31.984Z,1478856511.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:32.349Z,1478856512.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:32.377Z,1478856512.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:32.764Z,1478856512.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:32.780Z,1478856512.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:33.149Z,1478856513.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:33.182Z,1478856513.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:33.553Z,1478856513.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:33.585Z,1478856513.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:33.949Z,1478856513.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:34.029Z,1478856514.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:34.349Z,1478856514.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:34.381Z,1478856514.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:34.749Z,1478856514.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:34.790Z,1478856514.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:35.168Z,1478856515.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:35.276Z,1478856515.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:35.549Z,1478856515.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:35.601Z,1478856515.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:35.949Z,1478856515.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:35.994Z,1478856515.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:36.357Z,1478856516.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:36.389Z,1478856516.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:36.749Z,1478856516.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:36.792Z,1478856516.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:37.149Z,1478856517.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:37.192Z,1478856517.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:37.549Z,1478856517.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:37.564Z,1478856517.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:37.949Z,1478856517.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:37.986Z,1478856517.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:38.356Z,1478856518.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:38.371Z,1478856518.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:38.757Z,1478856518.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:38.773Z,1478856518.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:39.157Z,1478856519.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:39.177Z,1478856519.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:39.552Z,1478856519.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:39.584Z,1478856519.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:39.949Z,1478856519.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:39.964Z,1478856519.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:40.368Z,1478856520.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:40.392Z,1478856520.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:40.749Z,1478856520.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:40.769Z,1478856520.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:41.147Z,1478856521.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:41.162Z,1478856521.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:41.516Z,1478856521.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:41.549Z,1478856521.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:41.586Z,1478856521.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:41.960Z,1478856521.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:41.976Z,1478856521.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:42.312Z,1478856522.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:42.367Z,1478856522.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:42.382Z,1478856522.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:42.749Z,1478856522.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:42.774Z,1478856522.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:43.149Z,1478856523.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:43.181Z,1478856523.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:43.549Z,1478856523.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:43.584Z,1478856523.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:43.949Z,1478856523.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:43.982Z,1478856523.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:44.349Z,1478856524.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:44.381Z,1478856524.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:44.749Z,1478856524.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:44.775Z,1478856524.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:45.156Z,1478856525.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:45.180Z,1478856525.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:45.549Z,1478856525.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:45.581Z,1478856525.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:45.960Z,1478856525.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:45.976Z,1478856525.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:46.349Z,1478856526.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:46.383Z,1478856526.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:49.720Z,1478856529.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:49.794Z,1478856529.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:49.895Z,1478856529.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:49.933Z,1478856529.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:50.272Z,1478856530.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:50.305Z,1478856530.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:50.657Z,1478856530.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:50.689Z,1478856530.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:51.057Z,1478856531.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:51.106Z,1478856531.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:51.457Z,1478856531.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:51.493Z,1478856531.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:51.857Z,1478856531.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:51.902Z,1478856531.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:52.265Z,1478856532.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:52.318Z,1478856532.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:52.657Z,1478856532.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:52.672Z,1478856532.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:53.057Z,1478856533.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:53.077Z,1478856533.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:53.457Z,1478856533.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:53.481Z,1478856533.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:53.863Z,1478856533.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:53.885Z,1478856533.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:54.296Z,1478856534.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:54.329Z,1478856534.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:54.664Z,1478856534.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:54.680Z,1478856534.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:54.748Z,1478856534.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:55.064Z,1478856535.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:55.085Z,1478856535.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:55.465Z,1478856535.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:55.485Z,1478856535.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:55.544Z,1478856535.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:55.857Z,1478856535.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:55.893Z,1478856535.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:56.257Z,1478856536.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:56.290Z,1478856536.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:56.689Z,1478856536.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:56.708Z,1478856536.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:57.057Z,1478856537.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:57.090Z,1478856537.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:57.461Z,1478856537.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:57.493Z,1478856537.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:57.857Z,1478856537.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:57.891Z,1478856537.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:58.257Z,1478856538.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:58.289Z,1478856538.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:58.662Z,1478856538.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:58.705Z,1478856538.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:59.061Z,1478856539.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:59.093Z,1478856539.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:59.457Z,1478856539.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:59.493Z,1478856539.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:28:59.857Z,1478856539.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:28:59.892Z,1478856539.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:00.257Z,1478856540.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:00.281Z,1478856540.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:00.665Z,1478856540.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:00.680Z,1478856540.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:01.064Z,1478856541.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:01.079Z,1478856541.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:01.460Z,1478856541.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:01.488Z,1478856541.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:01.864Z,1478856541.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:01.880Z,1478856541.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:02.264Z,1478856542.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:02.280Z,1478856542.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:02.668Z,1478856542.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:02.683Z,1478856542.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:03.064Z,1478856543.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:03.080Z,1478856543.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:03.465Z,1478856543.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:03.485Z,1478856543.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:03.868Z,1478856543.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:03.883Z,1478856543.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:04.272Z,1478856544.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:04.341Z,1478856544.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:04.657Z,1478856544.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:04.691Z,1478856544.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:05.057Z,1478856545.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:05.106Z,1478856545.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:05.457Z,1478856545.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:05.489Z,1478856545.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:05.857Z,1478856545.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:05.905Z,1478856545.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:06.265Z,1478856546.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:06.335Z,1478856546.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:06.657Z,1478856546.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:06.689Z,1478856546.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:07.057Z,1478856547.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:07.093Z,1478856547.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:07.457Z,1478856547.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:07.493Z,1478856547.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:07.857Z,1478856547.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:07.889Z,1478856547.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:08.284Z,1478856548.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:08.336Z,1478856548.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:08.661Z,1478856548.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:08.686Z,1478856548.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:09.057Z,1478856549.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:09.088Z,1478856549.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:09.457Z,1478856549.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:09.472Z,1478856549.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:09.861Z,1478856549.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:09.897Z,1478856549.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:10.260Z,1478856550.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:10.276Z,1478856550.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:10.662Z,1478856550.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:10.686Z,1478856550.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:11.068Z,1478856551.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:11.088Z,1478856551.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:11.464Z,1478856551.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:11.479Z,1478856551.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:11.869Z,1478856551.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:11.884Z,1478856551.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:12.260Z,1478856552.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:12.291Z,1478856552.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:12.667Z,1478856552.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:12.695Z,1478856552.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:13.065Z,1478856553.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:13.085Z,1478856553.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:13.468Z,1478856553.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:13.484Z,1478856553.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:13.869Z,1478856553.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:13.886Z,1478856553.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:14.257Z,1478856554.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:14.282Z,1478856554.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:14.671Z,1478856554.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:14.690Z,1478856554.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:15.057Z,1478856555.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:15.092Z,1478856555.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:15.464Z,1478856555.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:15.487Z,1478856555.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:15.857Z,1478856555.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:15.892Z,1478856555.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:16.272Z,1478856556.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:16.288Z,1478856556.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:16.657Z,1478856556.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:16.689Z,1478856556.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:17.061Z,1478856557.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:17.122Z,1478856557.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:17.457Z,1478856557.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:17.488Z,1478856557.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:17.857Z,1478856557.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:17.900Z,1478856557.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:18.265Z,1478856558.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:18.329Z,1478856558.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:18.657Z,1478856558.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:18.673Z,1478856558.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:19.057Z,1478856559.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:19.108Z,1478856559.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:19.461Z,1478856559.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:19.481Z,1478856559.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:19.864Z,1478856559.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:19.913Z,1478856559.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:20.263Z,1478856560.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:20.278Z,1478856560.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:20.669Z,1478856560.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:20.723Z,1478856560.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:21.064Z,1478856561.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:21.082Z,1478856561.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:21.464Z,1478856561.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:21.479Z,1478856561.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:21.859Z,1478856561.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:21.892Z,1478856561.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:22.270Z,1478856562.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:22.302Z,1478856562.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:22.336Z,1478856562.336 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:22.336Z,1478856562.336 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 74
2016-11-11T09:29:22.336Z,1478856562.336 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:29:22.338Z,1478856562.338 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:22.338Z,1478856562.338 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 74
2016-11-11T09:29:22.338Z,1478856562.339 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:29:22.361Z,1478856562.361 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:29:22.361Z,1478856562.361 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:29:22.657Z,1478856562.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:22.683Z,1478856562.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:22.683Z,1478856562.683 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2016-11-11T09:29:22.683Z,1478856562.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:29:22.702Z,1478856562.702 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:29:22.703Z,1478856562.703 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:29:22.703Z,1478856562.703 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 74
2016-11-11T09:29:22.703Z,1478856562.703 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:29:22.703Z,1478856562.704 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 74
2016-11-11T09:29:23.072Z,1478856563.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:23.096Z,1478856563.096 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:29:23.097Z,1478856563.097 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:29:23.097Z,1478856563.097 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:29:23.097Z,1478856563.098 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:29:23.098Z,1478856563.098 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:29:23.098Z,1478856563.098 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:29:23.112Z,1478856563.112 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:29:23.112Z,1478856563.112 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2016-11-11T09:29:23.457Z,1478856563.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:23.488Z,1478856563.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:29:23.488Z,1478856563.488 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:29:23.489Z,1478856563.489 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:29:23.857Z,1478856563.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:23.894Z,1478856563.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:24.261Z,1478856564.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:24.294Z,1478856564.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:24.658Z,1478856564.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:24.673Z,1478856564.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:25.058Z,1478856565.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:25.077Z,1478856565.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:25.457Z,1478856565.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:25.477Z,1478856565.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:25.861Z,1478856565.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:25.877Z,1478856565.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:26.265Z,1478856566.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:26.280Z,1478856566.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:26.675Z,1478856566.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:26.694Z,1478856566.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:27.065Z,1478856567.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:27.081Z,1478856567.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:27.469Z,1478856567.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:27.489Z,1478856567.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:27.864Z,1478856567.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:27.894Z,1478856567.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:28.257Z,1478856568.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:28.283Z,1478856568.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:28.664Z,1478856568.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:28.696Z,1478856568.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:29.057Z,1478856569.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:29.092Z,1478856569.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:29.457Z,1478856569.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:29.482Z,1478856569.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:29.872Z,1478856569.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:29.887Z,1478856569.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:30.272Z,1478856570.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:30.293Z,1478856570.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:30.657Z,1478856570.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:30.693Z,1478856570.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:31.057Z,1478856571.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:31.093Z,1478856571.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:31.457Z,1478856571.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:31.510Z,1478856571.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:31.861Z,1478856571.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:31.876Z,1478856571.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:32.257Z,1478856572.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:32.277Z,1478856572.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:32.660Z,1478856572.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:32.717Z,1478856572.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:33.064Z,1478856573.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:33.080Z,1478856573.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:33.463Z,1478856573.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:33.517Z,1478856573.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:33.863Z,1478856573.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:33.885Z,1478856573.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:34.269Z,1478856574.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:34.320Z,1478856574.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:34.664Z,1478856574.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:34.713Z,1478856574.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:35.064Z,1478856575.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:35.085Z,1478856575.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:35.468Z,1478856575.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:35.484Z,1478856575.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:35.864Z,1478856575.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:35.885Z,1478856575.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:36.264Z,1478856576.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:36.324Z,1478856576.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:36.657Z,1478856576.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:36.685Z,1478856576.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:37.061Z,1478856577.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:37.076Z,1478856577.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:37.460Z,1478856577.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:37.475Z,1478856577.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:37.865Z,1478856577.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:37.880Z,1478856577.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:38.264Z,1478856578.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:38.279Z,1478856578.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:38.664Z,1478856578.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:38.678Z,1478856578.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:39.059Z,1478856579.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:39.091Z,1478856579.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:39.465Z,1478856579.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:39.485Z,1478856579.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:39.864Z,1478856579.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:39.878Z,1478856579.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:40.265Z,1478856580.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:40.281Z,1478856580.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:40.672Z,1478856580.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:40.693Z,1478856580.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:41.057Z,1478856581.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:41.090Z,1478856581.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:41.457Z,1478856581.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:41.492Z,1478856581.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:41.868Z,1478856581.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:41.893Z,1478856581.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:42.256Z,1478856582.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:42.301Z,1478856582.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:42.673Z,1478856582.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:42.688Z,1478856582.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:43.057Z,1478856583.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:43.093Z,1478856583.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:43.457Z,1478856583.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:43.489Z,1478856583.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:43.857Z,1478856583.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:43.889Z,1478856583.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:44.265Z,1478856584.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:44.290Z,1478856584.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:44.665Z,1478856584.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:44.690Z,1478856584.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:45.057Z,1478856585.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:45.093Z,1478856585.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:45.457Z,1478856585.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:45.514Z,1478856585.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:45.857Z,1478856585.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:45.893Z,1478856585.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:46.265Z,1478856586.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:46.291Z,1478856586.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:46.666Z,1478856586.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:46.710Z,1478856586.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:50.006Z,1478856590.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:50.022Z,1478856590.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:50.139Z,1478856590.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:50.213Z,1478856590.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:50.526Z,1478856590.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:50.563Z,1478856590.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:50.921Z,1478856590.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:50.953Z,1478856590.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:51.321Z,1478856591.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:51.366Z,1478856591.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:51.721Z,1478856591.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:51.738Z,1478856591.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:52.125Z,1478856592.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:52.170Z,1478856592.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:52.537Z,1478856592.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:52.624Z,1478856592.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:52.928Z,1478856592.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:52.950Z,1478856592.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:53.342Z,1478856593.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:53.358Z,1478856593.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:53.721Z,1478856593.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:53.754Z,1478856593.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:54.121Z,1478856594.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:54.153Z,1478856594.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:54.593Z,1478856594.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:54.616Z,1478856594.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:54.921Z,1478856594.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:54.958Z,1478856594.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:55.321Z,1478856595.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:55.357Z,1478856595.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:55.721Z,1478856595.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:55.760Z,1478856595.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:56.127Z,1478856596.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:56.173Z,1478856596.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:56.520Z,1478856596.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:56.562Z,1478856596.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:56.921Z,1478856596.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:56.941Z,1478856596.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:57.321Z,1478856597.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:57.341Z,1478856597.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:57.721Z,1478856597.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:57.741Z,1478856597.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:58.138Z,1478856598.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:58.198Z,1478856598.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:58.527Z,1478856598.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:58.543Z,1478856598.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:58.927Z,1478856598.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:58.989Z,1478856598.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:59.328Z,1478856599.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:59.344Z,1478856599.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:29:59.728Z,1478856599.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:29:59.744Z,1478856599.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:00.128Z,1478856600.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:00.143Z,1478856600.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:00.521Z,1478856600.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:00.555Z,1478856600.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:00.921Z,1478856600.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:00.956Z,1478856600.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:01.321Z,1478856601.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:01.346Z,1478856601.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:01.721Z,1478856601.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:01.749Z,1478856601.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:02.121Z,1478856602.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:02.153Z,1478856602.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:02.521Z,1478856602.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:02.554Z,1478856602.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:02.921Z,1478856602.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:02.955Z,1478856602.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:03.321Z,1478856603.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:03.405Z,1478856603.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:03.721Z,1478856603.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:03.757Z,1478856603.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:04.121Z,1478856604.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:04.201Z,1478856604.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:04.525Z,1478856604.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:04.577Z,1478856604.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:04.927Z,1478856604.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:04.984Z,1478856604.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:05.327Z,1478856605.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:05.349Z,1478856605.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:05.727Z,1478856605.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:05.776Z,1478856605.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:06.128Z,1478856606.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:06.149Z,1478856606.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:06.545Z,1478856606.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:06.599Z,1478856606.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:06.927Z,1478856606.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:06.943Z,1478856606.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:07.327Z,1478856607.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:07.377Z,1478856607.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:07.727Z,1478856607.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:07.749Z,1478856607.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:08.124Z,1478856608.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:08.154Z,1478856608.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:08.533Z,1478856608.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:08.592Z,1478856608.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:08.928Z,1478856608.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:08.943Z,1478856608.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:09.324Z,1478856609.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:09.347Z,1478856609.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:09.729Z,1478856609.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:09.749Z,1478856609.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:10.134Z,1478856610.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:10.149Z,1478856610.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:10.524Z,1478856610.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:10.548Z,1478856610.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:10.929Z,1478856610.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:10.989Z,1478856610.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:11.330Z,1478856611.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:11.353Z,1478856611.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:11.721Z,1478856611.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:11.753Z,1478856611.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:12.142Z,1478856612.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:12.157Z,1478856612.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:12.521Z,1478856612.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:12.564Z,1478856612.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:12.921Z,1478856612.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:12.958Z,1478856612.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:13.328Z,1478856613.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:13.356Z,1478856613.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:13.721Z,1478856613.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:13.741Z,1478856613.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:14.137Z,1478856614.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:14.153Z,1478856614.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:14.528Z,1478856614.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:14.552Z,1478856614.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:14.928Z,1478856614.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:14.949Z,1478856614.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:15.334Z,1478856615.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:15.357Z,1478856615.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:15.728Z,1478856615.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:15.744Z,1478856615.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:16.121Z,1478856616.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:16.154Z,1478856616.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:16.528Z,1478856616.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:16.552Z,1478856616.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:16.921Z,1478856616.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:16.953Z,1478856616.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:17.321Z,1478856617.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:17.329Z,1478856617.329 [BPC1](ERROR): Failed to parse message.
2016-11-11T09:30:17.330Z,1478856617.330 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T09:30:17.330Z,1478856617.330 [BPC1] Data Fault, FailCount= 1
2016-11-11T09:30:17.330Z,1478856617.330 [BPC1](ERROR): Data Fault
2016-11-11T09:30:17.359Z,1478856617.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:17.407Z,1478856617.407 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:30:17.729Z,1478856617.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:17.770Z,1478856617.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:18.156Z,1478856618.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:18.204Z,1478856618.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:18.528Z,1478856618.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:18.544Z,1478856618.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:18.599Z,1478856618.599 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:30:18.600Z,1478856618.599 [BPC1] No Fault, FailCount= 1
2016-11-11T09:30:18.924Z,1478856618.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:19.005Z,1478856619.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:19.328Z,1478856619.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:19.379Z,1478856619.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:19.727Z,1478856619.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:19.776Z,1478856619.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:20.124Z,1478856620.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:20.146Z,1478856620.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:20.532Z,1478856620.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:20.564Z,1478856620.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:20.921Z,1478856620.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:20.957Z,1478856620.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:21.321Z,1478856621.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:21.357Z,1478856621.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:21.721Z,1478856621.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:21.757Z,1478856621.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:22.121Z,1478856622.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:22.144Z,1478856622.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:22.528Z,1478856622.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:22.576Z,1478856622.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:22.925Z,1478856622.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:22.967Z,1478856622.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:23.323Z,1478856623.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:23.363Z,1478856623.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:23.725Z,1478856623.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:23.748Z,1478856623.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:24.127Z,1478856624.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:24.142Z,1478856624.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:24.524Z,1478856624.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:24.552Z,1478856624.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:24.921Z,1478856624.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:24.947Z,1478856624.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:25.329Z,1478856625.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:25.349Z,1478856625.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:25.729Z,1478856625.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:25.749Z,1478856625.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:26.136Z,1478856626.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:26.157Z,1478856626.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:26.532Z,1478856626.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:26.554Z,1478856626.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:26.921Z,1478856626.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:26.961Z,1478856626.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:27.329Z,1478856627.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:27.361Z,1478856627.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:27.725Z,1478856627.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:27.752Z,1478856627.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:28.134Z,1478856628.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:28.158Z,1478856628.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:28.525Z,1478856628.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:28.562Z,1478856628.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:28.922Z,1478856628.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:28.965Z,1478856628.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:29.322Z,1478856629.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:29.357Z,1478856629.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:29.730Z,1478856629.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:29.745Z,1478856629.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:30.138Z,1478856630.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:30.185Z,1478856630.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:30.529Z,1478856630.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:30.544Z,1478856630.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:30.929Z,1478856630.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:30.957Z,1478856630.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:31.329Z,1478856631.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:31.349Z,1478856631.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:31.721Z,1478856631.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:31.765Z,1478856631.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:32.149Z,1478856632.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:32.181Z,1478856632.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:32.521Z,1478856632.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:32.559Z,1478856632.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:32.921Z,1478856632.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:32.962Z,1478856632.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:33.321Z,1478856633.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:33.349Z,1478856633.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:33.721Z,1478856633.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:33.761Z,1478856633.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:34.121Z,1478856634.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:34.141Z,1478856634.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:34.534Z,1478856634.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:34.562Z,1478856634.562 [BPC1](ERROR): Failed to receive battery data
2016-11-11T09:30:34.562Z,1478856634.562 [BPC1] Communications Fault, FailCount= 2
2016-11-11T09:30:34.562Z,1478856634.562 [BPC1](ERROR): Communications Fault
2016-11-11T09:30:34.636Z,1478856634.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:34.677Z,1478856634.677 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T09:30:34.926Z,1478856634.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:34.942Z,1478856634.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:35.324Z,1478856635.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:35.345Z,1478856635.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:35.728Z,1478856635.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:35.743Z,1478856635.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:35.784Z,1478856635.783 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:30:35.784Z,1478856635.784 [BPC1] No Fault, FailCount= 2
2016-11-11T09:30:36.136Z,1478856636.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:36.230Z,1478856636.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:36.530Z,1478856636.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:36.586Z,1478856636.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:36.924Z,1478856636.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:36.957Z,1478856636.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:37.321Z,1478856637.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:37.355Z,1478856637.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:37.721Z,1478856637.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:37.755Z,1478856637.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:38.121Z,1478856638.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:38.146Z,1478856638.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:38.528Z,1478856638.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:38.552Z,1478856638.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:38.921Z,1478856638.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:38.964Z,1478856638.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:39.321Z,1478856639.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:39.357Z,1478856639.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:39.721Z,1478856639.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:39.757Z,1478856639.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:40.129Z,1478856640.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:40.154Z,1478856640.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:40.521Z,1478856640.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:40.557Z,1478856640.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:40.925Z,1478856640.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:40.961Z,1478856640.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:41.321Z,1478856641.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:41.357Z,1478856641.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:41.721Z,1478856641.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:41.744Z,1478856641.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:42.121Z,1478856642.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:42.161Z,1478856642.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:42.525Z,1478856642.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:42.566Z,1478856642.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:42.927Z,1478856642.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:42.943Z,1478856642.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:43.325Z,1478856643.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:43.345Z,1478856643.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:43.724Z,1478856643.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:43.739Z,1478856643.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:44.133Z,1478856644.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:44.148Z,1478856644.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:44.531Z,1478856644.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:44.547Z,1478856644.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:44.924Z,1478856644.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:44.957Z,1478856644.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:45.328Z,1478856645.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:45.355Z,1478856645.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:45.733Z,1478856645.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:45.753Z,1478856645.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:46.133Z,1478856646.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:46.166Z,1478856646.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:46.520Z,1478856646.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:46.553Z,1478856646.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:46.926Z,1478856646.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:46.951Z,1478856646.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:50.415Z,1478856650.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:50.573Z,1478856650.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:50.674Z,1478856650.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:50.707Z,1478856650.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:51.056Z,1478856651.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:51.104Z,1478856651.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:51.456Z,1478856651.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:51.471Z,1478856651.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:51.856Z,1478856651.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:51.908Z,1478856651.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:52.256Z,1478856652.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:52.294Z,1478856652.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:52.656Z,1478856652.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:52.671Z,1478856652.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:53.056Z,1478856653.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:53.072Z,1478856653.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:53.449Z,1478856653.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:53.483Z,1478856653.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:53.849Z,1478856653.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:53.883Z,1478856653.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:54.257Z,1478856654.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:54.285Z,1478856654.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:54.649Z,1478856654.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:54.669Z,1478856654.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:55.049Z,1478856655.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:55.069Z,1478856655.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:55.449Z,1478856655.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:55.464Z,1478856655.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:55.854Z,1478856655.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:55.869Z,1478856655.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:56.255Z,1478856656.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:56.270Z,1478856656.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:56.656Z,1478856656.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:56.672Z,1478856656.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:57.055Z,1478856657.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:57.074Z,1478856657.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:57.456Z,1478856657.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:57.471Z,1478856657.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:57.860Z,1478856657.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:57.876Z,1478856657.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:58.249Z,1478856658.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:58.282Z,1478856658.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:58.653Z,1478856658.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:58.685Z,1478856658.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:59.053Z,1478856659.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:59.086Z,1478856659.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:59.449Z,1478856659.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:59.489Z,1478856659.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:30:59.849Z,1478856659.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:30:59.869Z,1478856659.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:00.257Z,1478856660.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:00.293Z,1478856660.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:00.649Z,1478856660.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:00.669Z,1478856660.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:01.049Z,1478856661.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:01.069Z,1478856661.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:01.296Z,1478856661.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:01.449Z,1478856661.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:01.469Z,1478856661.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:01.852Z,1478856661.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:01.868Z,1478856661.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:02.092Z,1478856662.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:02.253Z,1478856662.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:02.273Z,1478856662.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:02.655Z,1478856662.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:02.705Z,1478856662.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:03.051Z,1478856663.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:03.076Z,1478856663.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:03.457Z,1478856663.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:03.477Z,1478856663.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:03.860Z,1478856663.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:03.876Z,1478856663.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:04.264Z,1478856664.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:04.281Z,1478856664.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:04.649Z,1478856664.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:04.698Z,1478856664.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:05.057Z,1478856665.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:05.092Z,1478856665.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:05.453Z,1478856665.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:05.479Z,1478856665.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:05.849Z,1478856665.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:05.894Z,1478856665.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:06.261Z,1478856666.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:06.293Z,1478856666.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:06.649Z,1478856666.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:06.701Z,1478856666.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:07.054Z,1478856667.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:07.109Z,1478856667.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:07.449Z,1478856667.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:07.469Z,1478856667.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:07.854Z,1478856667.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:07.869Z,1478856667.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:08.249Z,1478856668.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:08.285Z,1478856668.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:08.649Z,1478856668.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:08.681Z,1478856668.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:09.049Z,1478856669.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:09.089Z,1478856669.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:09.449Z,1478856669.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:09.481Z,1478856669.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:09.849Z,1478856669.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:09.881Z,1478856669.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:10.257Z,1478856670.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:10.272Z,1478856670.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:10.655Z,1478856670.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:10.678Z,1478856670.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:11.055Z,1478856671.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:11.071Z,1478856671.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:11.456Z,1478856671.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:11.477Z,1478856671.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:11.856Z,1478856671.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:11.871Z,1478856671.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:12.249Z,1478856672.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:12.291Z,1478856672.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:12.649Z,1478856672.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:12.681Z,1478856672.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:13.049Z,1478856673.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:13.077Z,1478856673.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:13.453Z,1478856673.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:13.500Z,1478856673.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:13.855Z,1478856673.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:13.871Z,1478856673.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:14.262Z,1478856674.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:14.277Z,1478856674.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:14.657Z,1478856674.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:14.673Z,1478856674.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:15.060Z,1478856675.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:15.075Z,1478856675.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:15.272Z,1478856675.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:15.464Z,1478856675.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:15.484Z,1478856675.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:15.852Z,1478856675.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:15.885Z,1478856675.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:16.068Z,1478856676.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:16.250Z,1478856676.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:16.281Z,1478856676.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:16.650Z,1478856676.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:16.687Z,1478856676.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:17.054Z,1478856677.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:17.091Z,1478856677.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:17.450Z,1478856677.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:17.485Z,1478856677.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:17.849Z,1478856677.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:17.905Z,1478856677.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:18.255Z,1478856678.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:18.264Z,1478856678.264 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T09:31:18.264Z,1478856678.264 [BPC1] Data Fault, FailCount= 1
2016-11-11T09:31:18.264Z,1478856678.264 [BPC1](ERROR): Data Fault
2016-11-11T09:31:18.273Z,1478856678.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:18.343Z,1478856678.343 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:31:18.661Z,1478856678.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:18.680Z,1478856678.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:19.055Z,1478856679.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:19.077Z,1478856679.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:19.455Z,1478856679.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:19.472Z,1478856679.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:19.515Z,1478856679.514 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:31:19.515Z,1478856679.515 [BPC1] No Fault, FailCount= 1
2016-11-11T09:31:19.861Z,1478856679.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:19.990Z,1478856679.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:20.259Z,1478856680.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:20.314Z,1478856680.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:20.657Z,1478856680.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:20.686Z,1478856680.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:21.049Z,1478856681.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:21.075Z,1478856681.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:21.449Z,1478856681.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:21.485Z,1478856681.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:21.849Z,1478856681.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:21.889Z,1478856681.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:22.264Z,1478856682.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:22.280Z,1478856682.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:22.649Z,1478856682.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:22.687Z,1478856682.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:23.049Z,1478856683.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:23.079Z,1478856683.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:23.449Z,1478856683.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:23.486Z,1478856683.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:23.849Z,1478856683.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:23.882Z,1478856683.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:24.249Z,1478856684.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:24.285Z,1478856684.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:24.653Z,1478856684.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:24.686Z,1478856684.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:25.049Z,1478856685.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:25.073Z,1478856685.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:25.452Z,1478856685.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:25.468Z,1478856685.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:25.854Z,1478856685.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:25.869Z,1478856685.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:26.256Z,1478856686.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:26.275Z,1478856686.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:26.660Z,1478856686.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:26.678Z,1478856686.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:27.060Z,1478856687.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:27.090Z,1478856687.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:27.449Z,1478856687.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:27.491Z,1478856687.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:27.853Z,1478856687.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:27.889Z,1478856687.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:28.259Z,1478856688.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:28.285Z,1478856688.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:28.649Z,1478856688.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:28.684Z,1478856688.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:29.049Z,1478856689.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:29.084Z,1478856689.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:29.248Z,1478856689.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:29.449Z,1478856689.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:29.481Z,1478856689.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:29.855Z,1478856689.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:29.871Z,1478856689.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:30.044Z,1478856690.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:30.256Z,1478856690.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:30.299Z,1478856690.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:30.665Z,1478856690.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:30.683Z,1478856690.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:31.063Z,1478856691.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:31.085Z,1478856691.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:31.451Z,1478856691.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:31.505Z,1478856691.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:31.849Z,1478856691.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:31.889Z,1478856691.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:32.249Z,1478856692.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:32.313Z,1478856692.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:32.658Z,1478856692.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:32.675Z,1478856692.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:33.053Z,1478856693.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:33.109Z,1478856693.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:33.456Z,1478856693.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:33.489Z,1478856693.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:33.853Z,1478856693.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:33.929Z,1478856693.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:34.264Z,1478856694.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:34.285Z,1478856694.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:34.651Z,1478856694.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:34.702Z,1478856694.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:35.049Z,1478856695.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:35.083Z,1478856695.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:35.486Z,1478856695.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:35.501Z,1478856695.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:35.850Z,1478856695.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:35.868Z,1478856695.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:36.259Z,1478856696.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:36.283Z,1478856696.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:36.653Z,1478856696.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:36.680Z,1478856696.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:37.057Z,1478856697.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:37.075Z,1478856697.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:37.459Z,1478856697.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:37.482Z,1478856697.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:37.859Z,1478856697.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:37.936Z,1478856697.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:38.249Z,1478856698.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:38.293Z,1478856698.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:38.654Z,1478856698.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:38.674Z,1478856698.674 [PNI_TCM](ERROR): CRC does not match. Expected:0x4566 got:0x38427
2016-11-11T09:31:38.701Z,1478856698.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:39.059Z,1478856699.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:39.085Z,1478856699.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:39.452Z,1478856699.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:39.485Z,1478856699.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:39.849Z,1478856699.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:39.941Z,1478856699.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:40.263Z,1478856700.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:40.278Z,1478856700.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:40.658Z,1478856700.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:40.677Z,1478856700.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:41.058Z,1478856701.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:41.073Z,1478856701.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:41.461Z,1478856701.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:41.479Z,1478856701.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:41.850Z,1478856701.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:41.873Z,1478856701.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:42.256Z,1478856702.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:42.271Z,1478856702.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:42.657Z,1478856702.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:42.677Z,1478856702.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:43.052Z,1478856703.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:43.078Z,1478856703.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:43.460Z,1478856703.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:43.466Z,1478856703.466 [PNI_TCM](ERROR): CRC does not match. Expected:0x16327 got:0x16962
2016-11-11T09:31:43.505Z,1478856703.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:43.852Z,1478856703.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:43.885Z,1478856703.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:44.260Z,1478856704.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:44.275Z,1478856704.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:44.649Z,1478856704.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:44.685Z,1478856704.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:45.051Z,1478856705.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:45.079Z,1478856705.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:45.451Z,1478856705.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:45.485Z,1478856705.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:45.849Z,1478856705.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:45.881Z,1478856705.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:45.890Z,1478856705.890 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T09:31:45.890Z,1478856705.890 [Default:CheckIn:C.Wait] Stopped
2016-11-11T09:31:45.890Z,1478856705.890 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T09:31:45.890Z,1478856705.890 [Default:CheckIn:D] Running Loop=1
2016-11-11T09:31:46.267Z,1478856706.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:46.289Z,1478856706.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:46.299Z,1478856706.299 [Default:CheckIn:D] Stopped
2016-11-11T09:31:46.299Z,1478856706.299 [Default:CheckIn:E] Running Loop=1
2016-11-11T09:31:46.651Z,1478856706.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:46.689Z,1478856706.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:46.698Z,1478856706.698 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 281.749805 min 
2016-11-11T09:31:46.698Z,1478856706.698 [Default:CheckIn:E] Stopped
2016-11-11T09:31:46.698Z,1478856706.698 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T09:31:46.698Z,1478856706.698 [Default:CheckIn] Stopped
2016-11-11T09:31:46.698Z,1478856706.698 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T09:31:46.698Z,1478856706.698 [Default:CheckIn](INFO): Running loop #28
2016-11-11T09:31:46.699Z,1478856706.699 [Default:CheckIn] Running Loop=28
2016-11-11T09:31:46.699Z,1478856706.699 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T09:31:46.699Z,1478856706.699 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T09:31:47.055Z,1478856707.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:47.086Z,1478856707.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:50.445Z,1478856710.445 [NAL9602](INFO): Powering up
2016-11-11T09:31:50.464Z,1478856710.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:50.486Z,1478856710.486 [BPC1](ERROR): Failed to receive battery data
2016-11-11T09:31:50.486Z,1478856710.486 [BPC1] Communications Fault, FailCount= 1
2016-11-11T09:31:50.486Z,1478856710.486 [BPC1](ERROR): Communications Fault
2016-11-11T09:31:50.495Z,1478856710.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:50.514Z,1478856710.514 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T09:31:50.598Z,1478856710.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:50.637Z,1478856710.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:50.948Z,1478856710.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:50.963Z,1478856710.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:51.351Z,1478856711.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:51.381Z,1478856711.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:51.458Z,1478856711.458 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:31:51.458Z,1478856711.458 [BPC1] No Fault, FailCount= 1
2016-11-11T09:31:51.751Z,1478856711.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:51.814Z,1478856711.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:52.159Z,1478856712.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:52.209Z,1478856712.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:52.545Z,1478856712.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:52.578Z,1478856712.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:52.945Z,1478856712.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:52.971Z,1478856712.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:53.345Z,1478856713.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:53.377Z,1478856713.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:53.745Z,1478856713.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:53.777Z,1478856713.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:54.145Z,1478856714.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:54.181Z,1478856714.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:54.545Z,1478856714.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:54.565Z,1478856714.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:54.952Z,1478856714.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:54.967Z,1478856714.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:55.351Z,1478856715.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:55.366Z,1478856715.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:55.752Z,1478856715.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:55.767Z,1478856715.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:56.157Z,1478856716.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:56.175Z,1478856716.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:56.552Z,1478856716.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:56.568Z,1478856716.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:56.955Z,1478856716.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:56.984Z,1478856716.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:57.345Z,1478856717.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:57.379Z,1478856717.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:57.745Z,1478856717.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:57.773Z,1478856717.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:58.149Z,1478856718.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:58.181Z,1478856718.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:58.545Z,1478856718.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:58.578Z,1478856718.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:58.945Z,1478856718.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:58.971Z,1478856718.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:59.345Z,1478856719.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:59.373Z,1478856719.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:31:59.745Z,1478856719.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:31:59.781Z,1478856719.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:00.153Z,1478856720.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:00.179Z,1478856720.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:00.545Z,1478856720.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:00.581Z,1478856720.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:00.976Z,1478856720.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:00.991Z,1478856720.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:01.329Z,1478856721.329 [NAL9602](INFO): NAL9602 initialized
2016-11-11T09:32:01.346Z,1478856721.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:01.385Z,1478856721.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:01.745Z,1478856721.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:01.765Z,1478856721.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:02.129Z,1478856722.129 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T09:32:02.129Z,1478856722.129 [NAL9602] Data Fault, FailCount= 5
2016-11-11T09:32:02.129Z,1478856722.129 [NAL9602](ERROR): Data Fault
2016-11-11T09:32:02.148Z,1478856722.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:02.176Z,1478856722.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:02.209Z,1478856722.209 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T09:32:02.209Z,1478856722.209 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-11-11T09:32:02.528Z,1478856722.528 [NAL9602](INFO): Powering down
2016-11-11T09:32:02.548Z,1478856722.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:02.580Z,1478856722.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:02.951Z,1478856722.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:03.018Z,1478856723.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:03.345Z,1478856723.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:03.370Z,1478856723.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:03.744Z,1478856723.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:03.793Z,1478856723.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:04.149Z,1478856724.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:04.187Z,1478856724.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:04.549Z,1478856724.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:04.590Z,1478856724.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:04.944Z,1478856724.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:04.981Z,1478856724.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:05.345Z,1478856725.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:05.398Z,1478856725.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:05.749Z,1478856725.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:05.801Z,1478856725.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:06.148Z,1478856726.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:06.163Z,1478856726.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:06.551Z,1478856726.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:06.566Z,1478856726.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:06.951Z,1478856726.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:06.966Z,1478856726.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:07.351Z,1478856727.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:07.366Z,1478856727.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:07.744Z,1478856727.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:07.774Z,1478856727.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:08.153Z,1478856728.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:08.185Z,1478856728.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:08.544Z,1478856728.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:08.572Z,1478856728.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:08.948Z,1478856728.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:08.984Z,1478856728.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:09.345Z,1478856729.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:09.380Z,1478856729.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:09.744Z,1478856729.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:09.766Z,1478856729.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:10.144Z,1478856730.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:10.188Z,1478856730.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:10.545Z,1478856730.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:10.581Z,1478856730.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:10.949Z,1478856730.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:10.964Z,1478856730.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:11.352Z,1478856731.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:11.367Z,1478856731.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:11.752Z,1478856731.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:11.768Z,1478856731.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:12.156Z,1478856732.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:12.172Z,1478856732.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:12.551Z,1478856732.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:12.566Z,1478856732.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:12.954Z,1478856732.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:12.974Z,1478856732.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:13.345Z,1478856733.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:13.377Z,1478856733.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:13.752Z,1478856733.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:13.774Z,1478856733.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:14.152Z,1478856734.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:14.174Z,1478856734.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:14.544Z,1478856734.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:14.570Z,1478856734.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:14.945Z,1478856734.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:14.976Z,1478856734.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:15.345Z,1478856735.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:15.373Z,1478856735.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:15.745Z,1478856735.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:15.753Z,1478856735.753 [BPC1](ERROR): Failed to parse message.
2016-11-11T09:32:15.753Z,1478856735.753 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T09:32:15.754Z,1478856735.754 [BPC1] Data Fault, FailCount= 1
2016-11-11T09:32:15.754Z,1478856735.754 [BPC1](ERROR): Data Fault
2016-11-11T09:32:15.774Z,1478856735.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:15.880Z,1478856735.880 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:32:16.144Z,1478856736.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:16.181Z,1478856736.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:16.556Z,1478856736.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:16.579Z,1478856736.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:16.945Z,1478856736.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:16.977Z,1478856736.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:16.000Z,1478856737.000 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:32:17.000Z,1478856737.000 [BPC1] No Fault, FailCount= 1
2016-11-11T09:32:17.344Z,1478856737.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:17.433Z,1478856737.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:17.749Z,1478856737.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:17.839Z,1478856737.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:18.180Z,1478856738.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:18.197Z,1478856738.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:18.544Z,1478856738.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:18.562Z,1478856738.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:18.953Z,1478856738.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:18.991Z,1478856738.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:19.350Z,1478856739.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:19.366Z,1478856739.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:19.749Z,1478856739.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:19.769Z,1478856739.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:20.156Z,1478856740.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:20.191Z,1478856740.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:20.544Z,1478856740.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:20.562Z,1478856740.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:20.950Z,1478856740.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:21.002Z,1478856741.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:21.354Z,1478856741.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:21.369Z,1478856741.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:21.748Z,1478856741.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:21.764Z,1478856741.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:22.159Z,1478856742.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:22.175Z,1478856742.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:22.557Z,1478856742.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:22.584Z,1478856742.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:22.948Z,1478856742.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:22.971Z,1478856742.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:23.356Z,1478856743.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:23.387Z,1478856743.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:23.395Z,1478856743.395 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:23.431Z,1478856743.431 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 75
2016-11-11T09:32:23.431Z,1478856743.431 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:32:23.433Z,1478856743.433 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:23.433Z,1478856743.433 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 75
2016-11-11T09:32:23.433Z,1478856743.433 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:32:23.476Z,1478856743.476 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:32:23.477Z,1478856743.477 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:32:23.746Z,1478856743.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:23.779Z,1478856743.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:23.779Z,1478856743.779 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2016-11-11T09:32:23.779Z,1478856743.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:32:23.817Z,1478856743.816 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:32:23.817Z,1478856743.817 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:32:23.817Z,1478856743.817 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 75
2016-11-11T09:32:23.817Z,1478856743.818 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:32:23.818Z,1478856743.818 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 75
2016-11-11T09:32:24.146Z,1478856744.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:24.185Z,1478856744.185 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:32:24.185Z,1478856744.185 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:32:24.186Z,1478856744.186 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:32:24.186Z,1478856744.186 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:32:24.186Z,1478856744.187 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:32:24.191Z,1478856744.191 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:32:24.217Z,1478856744.217 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:32:24.217Z,1478856744.217 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2016-11-11T09:32:24.558Z,1478856744.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:24.576Z,1478856744.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:32:24.576Z,1478856744.576 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:32:24.576Z,1478856744.576 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:32:24.945Z,1478856744.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:24.977Z,1478856744.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:25.345Z,1478856745.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:25.388Z,1478856745.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:25.745Z,1478856745.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:25.779Z,1478856745.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:26.151Z,1478856746.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:26.176Z,1478856746.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:26.544Z,1478856746.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:26.566Z,1478856746.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:26.950Z,1478856746.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:26.974Z,1478856746.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:27.348Z,1478856747.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:27.368Z,1478856747.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:27.752Z,1478856747.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:27.802Z,1478856747.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:28.150Z,1478856748.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:28.225Z,1478856748.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:28.544Z,1478856748.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:28.579Z,1478856748.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:28.945Z,1478856748.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:28.977Z,1478856748.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:29.349Z,1478856749.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:29.389Z,1478856749.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:29.748Z,1478856749.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:29.763Z,1478856749.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:30.151Z,1478856750.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:30.221Z,1478856750.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:30.558Z,1478856750.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:30.575Z,1478856750.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:30.955Z,1478856750.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:31.014Z,1478856751.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:31.345Z,1478856751.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:31.381Z,1478856751.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:31.744Z,1478856751.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:31.820Z,1478856751.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:32.144Z,1478856752.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:32.198Z,1478856752.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:32.544Z,1478856752.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:32.583Z,1478856752.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:32.945Z,1478856752.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:32.984Z,1478856752.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:33.345Z,1478856753.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:33.383Z,1478856753.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:33.745Z,1478856753.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:33.780Z,1478856753.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:34.149Z,1478856754.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:34.164Z,1478856754.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:34.548Z,1478856754.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:34.563Z,1478856754.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:34.945Z,1478856754.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:34.983Z,1478856754.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:35.345Z,1478856755.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:35.392Z,1478856755.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:35.745Z,1478856755.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:35.813Z,1478856755.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:36.156Z,1478856756.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:36.176Z,1478856756.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:36.553Z,1478856756.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:36.571Z,1478856756.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:36.954Z,1478856756.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:36.969Z,1478856756.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:37.351Z,1478856757.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:37.386Z,1478856757.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:37.751Z,1478856757.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:37.770Z,1478856757.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:38.152Z,1478856758.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:38.169Z,1478856758.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:38.554Z,1478856758.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:38.570Z,1478856758.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:38.963Z,1478856758.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:38.990Z,1478856758.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:39.351Z,1478856759.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:39.381Z,1478856759.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:39.745Z,1478856759.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:39.773Z,1478856759.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.392800 seconds old.
2016-11-11T09:32:39.774Z,1478856759.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:39.775Z,1478856759.776 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.393400 seconds old.
2016-11-11T09:32:39.778Z,1478856759.778 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.393400 seconds old.
2016-11-11T09:32:39.780Z,1478856759.780 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.394100 seconds old.
2016-11-11T09:32:39.782Z,1478856759.782 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.394300 seconds old.
2016-11-11T09:32:40.154Z,1478856760.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:40.183Z,1478856760.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.803100 seconds old.
2016-11-11T09:32:40.185Z,1478856760.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:40.186Z,1478856760.186 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.803500 seconds old.
2016-11-11T09:32:40.188Z,1478856760.188 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.803500 seconds old.
2016-11-11T09:32:40.190Z,1478856760.190 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.803900 seconds old.
2016-11-11T09:32:40.192Z,1478856760.192 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.804200 seconds old.
2016-11-11T09:32:40.547Z,1478856760.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:40.576Z,1478856760.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.195400 seconds old.
2016-11-11T09:32:40.577Z,1478856760.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:40.578Z,1478856760.578 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.196100 seconds old.
2016-11-11T09:32:40.581Z,1478856760.581 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.196100 seconds old.
2016-11-11T09:32:40.595Z,1478856760.595 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.196500 seconds old.
2016-11-11T09:32:40.600Z,1478856760.600 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.212800 seconds old.
2016-11-11T09:32:40.951Z,1478856760.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:40.971Z,1478856760.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:41.356Z,1478856761.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:41.383Z,1478856761.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:41.758Z,1478856761.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:41.777Z,1478856761.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:42.145Z,1478856762.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:42.185Z,1478856762.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:42.544Z,1478856762.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:42.582Z,1478856762.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:42.946Z,1478856762.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:42.997Z,1478856762.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:43.347Z,1478856763.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:43.381Z,1478856763.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:43.745Z,1478856763.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:43.834Z,1478856763.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:44.145Z,1478856764.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:44.206Z,1478856764.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:44.551Z,1478856764.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:44.585Z,1478856764.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:44.946Z,1478856764.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:44.980Z,1478856764.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:45.345Z,1478856765.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:45.401Z,1478856765.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:45.750Z,1478856765.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:45.808Z,1478856765.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:46.157Z,1478856766.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:46.209Z,1478856766.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:46.556Z,1478856766.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:46.570Z,1478856766.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:46.947Z,1478856766.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:47.005Z,1478856767.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:47.353Z,1478856767.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:47.394Z,1478856767.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:53.501Z,1478856773.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:53.517Z,1478856773.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:53.609Z,1478856773.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:53.638Z,1478856773.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:53.965Z,1478856773.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:53.981Z,1478856773.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:54.368Z,1478856774.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:54.389Z,1478856774.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:54.762Z,1478856774.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:54.778Z,1478856774.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:55.168Z,1478856775.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:55.183Z,1478856775.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:55.564Z,1478856775.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:55.585Z,1478856775.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:55.969Z,1478856775.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:55.984Z,1478856775.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:56.365Z,1478856776.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:56.385Z,1478856776.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:56.765Z,1478856776.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:56.780Z,1478856776.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:57.169Z,1478856777.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:57.184Z,1478856777.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:57.565Z,1478856777.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:57.580Z,1478856777.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:57.969Z,1478856777.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:58.009Z,1478856778.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:58.364Z,1478856778.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:58.380Z,1478856778.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:58.768Z,1478856778.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:58.783Z,1478856778.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:59.176Z,1478856779.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:59.217Z,1478856779.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:59.569Z,1478856779.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:32:59.585Z,1478856779.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:32:59.968Z,1478856779.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:00.010Z,1478856780.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:00.364Z,1478856780.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:00.413Z,1478856780.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:00.768Z,1478856780.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:00.784Z,1478856780.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:01.165Z,1478856781.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:01.213Z,1478856781.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:01.568Z,1478856781.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:01.606Z,1478856781.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:01.964Z,1478856781.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:01.985Z,1478856781.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:02.368Z,1478856782.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:02.384Z,1478856782.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:02.833Z,1478856782.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:02.917Z,1478856782.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:03.168Z,1478856783.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:03.228Z,1478856783.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:03.566Z,1478856783.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:03.589Z,1478856783.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:03.966Z,1478856783.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:03.994Z,1478856783.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:04.366Z,1478856784.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:04.394Z,1478856784.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:04.766Z,1478856784.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:04.789Z,1478856784.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:05.166Z,1478856785.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:05.190Z,1478856785.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:05.565Z,1478856785.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:05.594Z,1478856785.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:05.984Z,1478856785.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:06.010Z,1478856786.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:06.365Z,1478856786.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:06.389Z,1478856786.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:06.765Z,1478856786.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:06.789Z,1478856786.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:07.165Z,1478856787.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:07.193Z,1478856787.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:07.588Z,1478856787.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:07.624Z,1478856787.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:07.976Z,1478856787.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:07.991Z,1478856787.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:08.366Z,1478856788.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:08.417Z,1478856788.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:08.780Z,1478856788.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:08.816Z,1478856788.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:09.165Z,1478856789.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:09.201Z,1478856789.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:09.569Z,1478856789.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:09.601Z,1478856789.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:09.973Z,1478856789.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:10.005Z,1478856790.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:10.364Z,1478856790.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:10.401Z,1478856790.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:10.782Z,1478856790.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:10.806Z,1478856790.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:11.176Z,1478856791.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:11.208Z,1478856791.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:11.584Z,1478856791.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:11.608Z,1478856791.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:11.965Z,1478856791.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:11.993Z,1478856791.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:12.372Z,1478856792.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:12.441Z,1478856792.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:12.780Z,1478856792.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:12.795Z,1478856792.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:13.164Z,1478856793.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:13.206Z,1478856793.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:13.565Z,1478856793.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:13.617Z,1478856793.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:13.984Z,1478856793.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:14.025Z,1478856794.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:14.373Z,1478856794.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:14.393Z,1478856794.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:14.774Z,1478856794.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:14.833Z,1478856794.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:15.167Z,1478856795.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:15.186Z,1478856795.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:15.566Z,1478856795.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:15.609Z,1478856795.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:15.967Z,1478856795.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:16.040Z,1478856796.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:16.367Z,1478856796.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:16.418Z,1478856796.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:16.775Z,1478856796.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:16.823Z,1478856796.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:17.168Z,1478856797.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:17.215Z,1478856797.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:17.574Z,1478856797.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:17.626Z,1478856797.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:17.975Z,1478856797.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:17.995Z,1478856797.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:18.367Z,1478856798.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:18.400Z,1478856798.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:18.766Z,1478856798.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:18.805Z,1478856798.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:19.166Z,1478856799.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:19.216Z,1478856799.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:19.567Z,1478856799.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:19.603Z,1478856799.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:19.975Z,1478856799.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:20.010Z,1478856800.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:20.375Z,1478856800.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:20.418Z,1478856800.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:20.773Z,1478856800.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:20.802Z,1478856800.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:21.174Z,1478856801.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:21.198Z,1478856801.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:21.576Z,1478856801.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:21.605Z,1478856801.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:21.975Z,1478856801.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:22.004Z,1478856802.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:22.394Z,1478856802.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:22.426Z,1478856802.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:22.772Z,1478856802.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:22.816Z,1478856802.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:23.174Z,1478856803.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:23.198Z,1478856803.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:23.565Z,1478856803.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:23.591Z,1478856803.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:23.977Z,1478856803.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:24.002Z,1478856804.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:24.365Z,1478856804.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:24.398Z,1478856804.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:24.769Z,1478856804.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:24.796Z,1478856804.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:25.171Z,1478856805.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:25.196Z,1478856805.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:25.564Z,1478856805.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:25.602Z,1478856805.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:25.965Z,1478856805.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:26.002Z,1478856806.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:26.364Z,1478856806.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:26.388Z,1478856806.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:26.764Z,1478856806.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:26.817Z,1478856806.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:27.172Z,1478856807.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:27.204Z,1478856807.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:27.564Z,1478856807.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:27.585Z,1478856807.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:27.976Z,1478856807.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:28.033Z,1478856808.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:28.371Z,1478856808.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:28.387Z,1478856808.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:28.764Z,1478856808.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:28.789Z,1478856808.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:29.164Z,1478856809.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:29.221Z,1478856809.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:29.564Z,1478856809.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:29.597Z,1478856809.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:29.964Z,1478856809.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:30.017Z,1478856810.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:30.364Z,1478856810.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:30.421Z,1478856810.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:30.765Z,1478856810.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:30.800Z,1478856810.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:31.165Z,1478856811.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:31.189Z,1478856811.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:31.564Z,1478856811.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:31.598Z,1478856811.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:31.976Z,1478856811.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:31.000Z,1478856812.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:32.364Z,1478856812.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:32.398Z,1478856812.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:32.764Z,1478856812.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:32.788Z,1478856812.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:33.164Z,1478856813.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:33.205Z,1478856813.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:33.569Z,1478856813.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:33.607Z,1478856813.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:33.977Z,1478856813.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:34.006Z,1478856814.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:34.370Z,1478856814.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:34.385Z,1478856814.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:34.765Z,1478856814.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:34.801Z,1478856814.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:35.056Z,1478856815.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:35.164Z,1478856815.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:35.188Z,1478856815.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:35.564Z,1478856815.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:35.601Z,1478856815.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:35.852Z,1478856815.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:35.973Z,1478856815.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:36.009Z,1478856816.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:36.370Z,1478856816.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:36.389Z,1478856816.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:36.770Z,1478856816.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:36.785Z,1478856816.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:37.169Z,1478856817.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:37.185Z,1478856817.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:37.568Z,1478856817.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:37.584Z,1478856817.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:37.969Z,1478856817.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:37.984Z,1478856817.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:38.373Z,1478856818.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:38.393Z,1478856818.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:38.769Z,1478856818.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:38.784Z,1478856818.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:39.165Z,1478856819.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:39.180Z,1478856819.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:39.569Z,1478856819.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:39.584Z,1478856819.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:39.964Z,1478856819.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:39.979Z,1478856819.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:40.369Z,1478856820.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:40.385Z,1478856820.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:40.765Z,1478856820.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:40.785Z,1478856820.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:41.169Z,1478856821.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:41.202Z,1478856821.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:41.569Z,1478856821.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:41.585Z,1478856821.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:41.968Z,1478856821.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:41.984Z,1478856821.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:42.401Z,1478856822.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:42.463Z,1478856822.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:42.769Z,1478856822.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:42.784Z,1478856822.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:43.168Z,1478856823.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:43.184Z,1478856823.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:43.564Z,1478856823.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:43.613Z,1478856823.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:43.969Z,1478856823.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:43.984Z,1478856823.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:44.364Z,1478856824.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:44.402Z,1478856824.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:44.764Z,1478856824.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:44.802Z,1478856824.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:45.165Z,1478856825.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:45.185Z,1478856825.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:45.568Z,1478856825.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:45.584Z,1478856825.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:45.969Z,1478856825.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:45.987Z,1478856825.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:46.369Z,1478856826.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:46.384Z,1478856826.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:46.769Z,1478856826.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:46.784Z,1478856826.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:47.168Z,1478856827.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:47.183Z,1478856827.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:47.570Z,1478856827.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:47.589Z,1478856827.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:50.496Z,1478856830.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:50.939Z,1478856830.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:50.955Z,1478856830.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:51.049Z,1478856831.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:51.081Z,1478856831.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:51.292Z,1478856831.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:51.409Z,1478856831.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:51.429Z,1478856831.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:51.809Z,1478856831.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:51.824Z,1478856831.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:52.088Z,1478856832.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:52.209Z,1478856832.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:52.224Z,1478856832.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:52.609Z,1478856832.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:52.624Z,1478856832.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:52.884Z,1478856832.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:53.009Z,1478856833.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:53.029Z,1478856833.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:53.409Z,1478856833.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:53.424Z,1478856833.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:53.680Z,1478856833.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:53.809Z,1478856833.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:53.824Z,1478856833.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:54.208Z,1478856834.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:54.224Z,1478856834.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:54.476Z,1478856834.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:54.606Z,1478856834.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:54.643Z,1478856834.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:55.007Z,1478856835.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:55.061Z,1478856835.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:55.136Z,1478856835.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:55.405Z,1478856835.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:55.433Z,1478856835.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:55.544Z,1478856835.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:55.805Z,1478856835.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:55.829Z,1478856835.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:55.952Z,1478856835.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:56.205Z,1478856836.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:56.233Z,1478856836.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:56.360Z,1478856836.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:56.605Z,1478856836.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:56.653Z,1478856836.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:56.768Z,1478856836.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:57.005Z,1478856837.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:57.029Z,1478856837.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:57.176Z,1478856837.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:57.405Z,1478856837.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:57.437Z,1478856837.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:57.584Z,1478856837.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:57.805Z,1478856837.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:57.849Z,1478856837.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:57.992Z,1478856837.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:58.205Z,1478856838.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:58.229Z,1478856838.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:58.400Z,1478856838.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:58.605Z,1478856838.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:58.649Z,1478856838.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:59.004Z,1478856839.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:59.059Z,1478856839.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:59.196Z,1478856839.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:59.408Z,1478856839.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:59.423Z,1478856839.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:59.816Z,1478856839.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:33:59.831Z,1478856839.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:33:59.992Z,1478856839.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:00.211Z,1478856840.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:00.226Z,1478856840.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:00.400Z,1478856840.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:00.612Z,1478856840.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:00.627Z,1478856840.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:01.021Z,1478856841.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:01.074Z,1478856841.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:01.196Z,1478856841.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:01.411Z,1478856841.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:01.426Z,1478856841.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:01.816Z,1478856841.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:01.832Z,1478856841.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:01.992Z,1478856841.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:02.220Z,1478856842.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:02.235Z,1478856842.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:02.267Z,1478856842.267 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T09:34:02.267Z,1478856842.267 [NAL9602] No Fault, FailCount= 5
2016-11-11T09:34:02.589Z,1478856842.589 [NAL9602](INFO): Powering up NAL9602
2016-11-11T09:34:02.606Z,1478856842.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:02.652Z,1478856842.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:02.788Z,1478856842.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:03.005Z,1478856843.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:03.037Z,1478856843.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:03.196Z,1478856843.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:03.409Z,1478856843.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:03.445Z,1478856843.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:03.805Z,1478856843.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:03.840Z,1478856843.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:03.992Z,1478856843.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:04.207Z,1478856844.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:04.244Z,1478856844.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:04.580Z,1478856844.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:04.605Z,1478856844.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:04.644Z,1478856844.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:05.005Z,1478856845.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:05.041Z,1478856845.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:05.376Z,1478856845.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:05.405Z,1478856845.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:05.428Z,1478856845.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:05.844Z,1478856845.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:05.859Z,1478856845.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:06.172Z,1478856846.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:06.209Z,1478856846.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:06.224Z,1478856846.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:06.592Z,1478856846.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:06.607Z,1478856846.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:06.639Z,1478856846.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:07.012Z,1478856847.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:07.027Z,1478856847.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:07.388Z,1478856847.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:07.418Z,1478856847.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:07.433Z,1478856847.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:07.813Z,1478856847.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:07.829Z,1478856847.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:08.104Z,1478856848.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:08.220Z,1478856848.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:08.236Z,1478856848.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:08.605Z,1478856848.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:08.638Z,1478856848.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:08.900Z,1478856848.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:09.005Z,1478856849.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:09.038Z,1478856849.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:09.405Z,1478856849.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:09.440Z,1478856849.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:09.696Z,1478856849.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:09.820Z,1478856849.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:09.881Z,1478856849.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:10.104Z,1478856850.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:10.209Z,1478856850.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:10.237Z,1478856850.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:10.609Z,1478856850.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:10.645Z,1478856850.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:10.900Z,1478856850.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:11.005Z,1478856851.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:11.048Z,1478856851.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:11.405Z,1478856851.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:11.442Z,1478856851.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:11.696Z,1478856851.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:11.813Z,1478856851.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:11.849Z,1478856851.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:12.205Z,1478856852.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:12.258Z,1478856852.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:12.492Z,1478856852.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:12.605Z,1478856852.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:12.625Z,1478856852.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:12.924Z,1478856852.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:13.009Z,1478856853.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:13.065Z,1478856853.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:13.420Z,1478856853.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:13.465Z,1478856853.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:13.720Z,1478856853.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:13.789Z,1478856853.789 [NAL9602](INFO): NAL9602 initialized
2016-11-11T09:34:13.805Z,1478856853.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:13.825Z,1478856853.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:14.128Z,1478856854.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:14.209Z,1478856854.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:14.229Z,1478856854.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:14.624Z,1478856854.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:14.656Z,1478856854.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:14.924Z,1478856854.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:15.020Z,1478856855.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:15.035Z,1478856855.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:15.424Z,1478856855.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:15.440Z,1478856855.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:15.720Z,1478856855.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:15.816Z,1478856855.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:15.845Z,1478856855.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:16.214Z,1478856856.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:16.229Z,1478856856.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:16.236Z,1478856856.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:16.629Z,1478856856.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:16.649Z,1478856856.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:17.028Z,1478856857.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:17.032Z,1478856857.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:17.052Z,1478856857.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:17.424Z,1478856857.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:17.440Z,1478856857.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:17.814Z,1478856857.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:17.828Z,1478856857.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:17.850Z,1478856857.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:18.206Z,1478856858.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:18.226Z,1478856858.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:18.556Z,1478856858.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:18.610Z,1478856858.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:18.638Z,1478856858.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:19.010Z,1478856859.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:19.041Z,1478856859.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:19.352Z,1478856859.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:19.408Z,1478856859.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:19.441Z,1478856859.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:19.814Z,1478856859.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:19.829Z,1478856859.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:20.148Z,1478856860.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:20.213Z,1478856860.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:20.229Z,1478856860.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:20.556Z,1478856860.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:20.605Z,1478856860.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:20.632Z,1478856860.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:21.029Z,1478856861.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:21.045Z,1478856861.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:21.352Z,1478856861.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:21.431Z,1478856861.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:21.446Z,1478856861.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:21.828Z,1478856861.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:21.844Z,1478856861.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:22.092Z,1478856862.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:22.229Z,1478856862.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:22.244Z,1478856862.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:22.624Z,1478856862.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:22.656Z,1478856862.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:22.888Z,1478856862.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:23.016Z,1478856863.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:23.049Z,1478856863.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:23.410Z,1478856863.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:23.425Z,1478856863.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:23.686Z,1478856863.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:23.830Z,1478856863.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:23.860Z,1478856863.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:24.164Z,1478856864.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:24.211Z,1478856864.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:24.227Z,1478856864.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:24.613Z,1478856864.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:24.629Z,1478856864.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:24.960Z,1478856864.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:25.012Z,1478856865.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:25.037Z,1478856865.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:25.405Z,1478856865.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:25.485Z,1478856865.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:25.756Z,1478856865.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:25.805Z,1478856865.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:25.837Z,1478856865.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:26.164Z,1478856866.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:26.206Z,1478856866.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:26.246Z,1478856866.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:26.605Z,1478856866.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:26.642Z,1478856866.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:26.960Z,1478856866.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:27.028Z,1478856867.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:27.082Z,1478856867.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:27.428Z,1478856867.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:27.484Z,1478856867.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:27.756Z,1478856867.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:27.824Z,1478856867.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:27.855Z,1478856867.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:28.164Z,1478856868.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:28.216Z,1478856868.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:28.243Z,1478856868.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:28.606Z,1478856868.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:28.649Z,1478856868.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:28.960Z,1478856868.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:29.006Z,1478856869.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:29.029Z,1478856869.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:29.411Z,1478856869.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:29.427Z,1478856869.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:29.757Z,1478856869.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:29.820Z,1478856869.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:29.845Z,1478856869.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:30.176Z,1478856870.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:30.208Z,1478856870.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:30.242Z,1478856870.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:30.612Z,1478856870.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:30.628Z,1478856870.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:30.972Z,1478856870.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:31.006Z,1478856871.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:31.043Z,1478856871.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:31.405Z,1478856871.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:31.431Z,1478856871.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:31.768Z,1478856871.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:31.817Z,1478856871.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:31.841Z,1478856871.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:32.228Z,1478856872.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:32.249Z,1478856872.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:32.536Z,1478856872.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:32.620Z,1478856872.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:32.646Z,1478856872.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:33.027Z,1478856873.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:33.049Z,1478856873.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:33.332Z,1478856873.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:33.428Z,1478856873.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:33.451Z,1478856873.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:33.805Z,1478856873.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:33.834Z,1478856873.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:34.128Z,1478856874.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:34.209Z,1478856874.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:34.233Z,1478856874.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:34.536Z,1478856874.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:34.610Z,1478856874.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:34.652Z,1478856874.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:35.005Z,1478856875.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:35.025Z,1478856875.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:35.332Z,1478856875.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:35.409Z,1478856875.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:35.425Z,1478856875.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:35.813Z,1478856875.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:35.829Z,1478856875.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:36.084Z,1478856876.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:36.208Z,1478856876.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:36.230Z,1478856876.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:36.619Z,1478856876.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:36.635Z,1478856876.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:36.880Z,1478856876.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:37.014Z,1478856877.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:37.033Z,1478856877.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:37.427Z,1478856877.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:37.442Z,1478856877.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:37.676Z,1478856877.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:37.830Z,1478856877.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:37.849Z,1478856877.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:38.084Z,1478856878.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:38.227Z,1478856878.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:38.246Z,1478856878.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:38.620Z,1478856878.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:38.651Z,1478856878.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:38.880Z,1478856878.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:39.005Z,1478856879.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:39.041Z,1478856879.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:39.405Z,1478856879.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:39.469Z,1478856879.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:39.676Z,1478856879.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:39.817Z,1478856879.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:39.865Z,1478856879.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:40.084Z,1478856880.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:40.212Z,1478856880.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:40.227Z,1478856880.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:40.612Z,1478856880.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:40.627Z,1478856880.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:40.880Z,1478856880.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:41.010Z,1478856881.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:41.057Z,1478856881.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:41.440Z,1478856881.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:41.465Z,1478856881.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:41.676Z,1478856881.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:41.833Z,1478856881.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:41.885Z,1478856881.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:42.084Z,1478856882.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:42.205Z,1478856882.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:42.257Z,1478856882.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:42.628Z,1478856882.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:42.644Z,1478856882.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:42.880Z,1478856882.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:43.033Z,1478856883.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:43.048Z,1478856883.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:43.420Z,1478856883.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:43.457Z,1478856883.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:43.676Z,1478856883.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:43.844Z,1478856883.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:43.860Z,1478856883.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:44.152Z,1478856884.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:44.214Z,1478856884.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:44.229Z,1478856884.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:44.613Z,1478856884.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:44.633Z,1478856884.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:44.948Z,1478856884.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:45.013Z,1478856885.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:45.029Z,1478856885.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:45.412Z,1478856885.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:45.427Z,1478856885.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:45.744Z,1478856885.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:45.809Z,1478856885.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:45.830Z,1478856885.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:46.220Z,1478856886.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:46.241Z,1478856886.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:46.512Z,1478856886.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:46.614Z,1478856886.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:46.633Z,1478856886.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:47.017Z,1478856887.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:47.032Z,1478856887.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:47.310Z,1478856887.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:47.421Z,1478856887.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:47.441Z,1478856887.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:47.828Z,1478856887.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:47.843Z,1478856887.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:48.105Z,1478856888.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:48.512Z,1478856888.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:49.308Z,1478856889.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:50.064Z,1478856890.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:50.860Z,1478856890.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:51.385Z,1478856891.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:51.405Z,1478856891.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:51.524Z,1478856891.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:51.557Z,1478856891.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:51.660Z,1478856891.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:51.900Z,1478856891.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:51.916Z,1478856891.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:52.080Z,1478856892.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:52.288Z,1478856892.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:52.321Z,1478856892.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:52.692Z,1478856892.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:52.714Z,1478856892.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:52.876Z,1478856892.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:53.089Z,1478856893.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:53.112Z,1478856893.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:53.501Z,1478856893.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:53.510Z,1478856893.510 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T09:34:53.510Z,1478856893.510 [BPC1] Data Fault, FailCount= 1
2016-11-11T09:34:53.510Z,1478856893.510 [BPC1](ERROR): Data Fault
2016-11-11T09:34:53.518Z,1478856893.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:53.559Z,1478856893.559 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:34:53.672Z,1478856893.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:53.885Z,1478856893.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:53.917Z,1478856893.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:54.080Z,1478856894.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:54.286Z,1478856894.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:54.301Z,1478856894.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:54.689Z,1478856894.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:54.709Z,1478856894.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:54.763Z,1478856894.763 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:34:54.764Z,1478856894.764 [BPC1] No Fault, FailCount= 1
2016-11-11T09:34:54.876Z,1478856894.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:55.091Z,1478856895.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:55.169Z,1478856895.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:55.492Z,1478856895.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:55.549Z,1478856895.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:55.672Z,1478856895.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:55.888Z,1478856895.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:55.921Z,1478856895.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:56.080Z,1478856896.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:56.306Z,1478856896.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:56.329Z,1478856896.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:56.704Z,1478856896.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:56.741Z,1478856896.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:56.876Z,1478856896.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:57.100Z,1478856897.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:57.137Z,1478856897.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:57.500Z,1478856897.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:57.532Z,1478856897.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:57.677Z,1478856897.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:57.893Z,1478856897.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:57.913Z,1478856897.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:58.136Z,1478856898.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:58.292Z,1478856898.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:58.307Z,1478856898.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:58.692Z,1478856898.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:58.707Z,1478856898.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:58.934Z,1478856898.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:59.093Z,1478856899.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:59.118Z,1478856899.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:59.488Z,1478856899.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:59.520Z,1478856899.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:34:59.728Z,1478856899.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:59.896Z,1478856899.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:34:59.917Z,1478856899.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:00.285Z,1478856900.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:00.312Z,1478856900.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:00.488Z,1478856900.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:00.685Z,1478856900.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:00.721Z,1478856900.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:01.092Z,1478856901.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:01.108Z,1478856901.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:01.284Z,1478856901.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:01.504Z,1478856901.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:01.520Z,1478856901.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:01.903Z,1478856901.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:01.918Z,1478856901.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:02.081Z,1478856902.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:02.310Z,1478856902.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:02.329Z,1478856902.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:02.500Z,1478856902.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:02.711Z,1478856902.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:02.727Z,1478856902.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:03.085Z,1478856903.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:03.118Z,1478856903.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:03.298Z,1478856903.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:03.485Z,1478856903.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:03.517Z,1478856903.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:03.894Z,1478856903.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:03.923Z,1478856903.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:04.044Z,1478856904.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:04.289Z,1478856904.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:04.305Z,1478856904.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:04.690Z,1478856904.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:04.713Z,1478856904.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:04.840Z,1478856904.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:05.098Z,1478856905.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:05.113Z,1478856905.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:05.493Z,1478856905.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:05.517Z,1478856905.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:05.636Z,1478856905.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:05.894Z,1478856905.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:05.918Z,1478856905.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:06.060Z,1478856906.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:06.294Z,1478856906.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:06.308Z,1478856906.307 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T09:35:06.308Z,1478856906.308 [BPC1] Data Fault, FailCount= 2
2016-11-11T09:35:06.308Z,1478856906.308 [BPC1](ERROR): Data Fault
2016-11-11T09:35:06.320Z,1478856906.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:06.363Z,1478856906.364 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:35:06.702Z,1478856906.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:06.721Z,1478856906.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:06.856Z,1478856906.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:07.105Z,1478856907.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:07.124Z,1478856907.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:07.507Z,1478856907.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:07.562Z,1478856907.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:07.633Z,1478856907.633 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:35:07.633Z,1478856907.633 [BPC1] No Fault, FailCount= 2
2016-11-11T09:35:07.661Z,1478856907.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:07.896Z,1478856907.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:07.985Z,1478856907.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:08.072Z,1478856908.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:08.285Z,1478856908.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:08.331Z,1478856908.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:08.686Z,1478856908.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:08.745Z,1478856908.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:08.868Z,1478856908.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:09.090Z,1478856909.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:09.105Z,1478856909.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:09.486Z,1478856909.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:09.502Z,1478856909.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:09.664Z,1478856909.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:09.895Z,1478856909.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:09.921Z,1478856909.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:10.072Z,1478856910.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:10.289Z,1478856910.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:10.325Z,1478856910.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:10.685Z,1478856910.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:10.721Z,1478856910.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:10.868Z,1478856910.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:11.085Z,1478856911.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:11.117Z,1478856911.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:11.485Z,1478856911.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:11.522Z,1478856911.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:11.665Z,1478856911.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:11.911Z,1478856911.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:11.937Z,1478856911.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:12.112Z,1478856912.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:12.304Z,1478856912.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:12.339Z,1478856912.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:12.704Z,1478856912.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:12.736Z,1478856912.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:12.908Z,1478856912.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:13.096Z,1478856913.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:13.116Z,1478856913.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:13.494Z,1478856913.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:13.512Z,1478856913.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:13.704Z,1478856913.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:13.888Z,1478856913.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:13.916Z,1478856913.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:14.292Z,1478856914.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:14.322Z,1478856914.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:14.472Z,1478856914.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:14.686Z,1478856914.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:14.715Z,1478856914.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:15.085Z,1478856915.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:15.124Z,1478856915.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:15.268Z,1478856915.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:15.485Z,1478856915.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:15.517Z,1478856915.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:15.885Z,1478856915.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:15.921Z,1478856915.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:16.064Z,1478856916.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:16.285Z,1478856916.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:16.327Z,1478856916.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:16.472Z,1478856916.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:16.685Z,1478856916.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:16.705Z,1478856916.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:17.107Z,1478856917.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:17.151Z,1478856917.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:17.268Z,1478856917.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:17.497Z,1478856917.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:17.520Z,1478856917.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:17.910Z,1478856917.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:17.926Z,1478856917.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:18.024Z,1478856918.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:18.307Z,1478856918.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:18.338Z,1478856918.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:18.685Z,1478856918.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:18.728Z,1478856918.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:18.820Z,1478856918.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:19.085Z,1478856919.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:19.127Z,1478856919.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:19.486Z,1478856919.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:19.521Z,1478856919.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:19.616Z,1478856919.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:19.899Z,1478856919.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:19.927Z,1478856919.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:20.032Z,1478856920.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:20.297Z,1478856920.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:20.329Z,1478856920.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:20.685Z,1478856920.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:20.777Z,1478856920.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:20.828Z,1478856920.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:21.085Z,1478856921.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:21.124Z,1478856921.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:21.487Z,1478856921.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:21.520Z,1478856921.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:21.624Z,1478856921.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:21.892Z,1478856921.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:21.953Z,1478856921.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:22.032Z,1478856922.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:22.300Z,1478856922.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:22.319Z,1478856922.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:22.700Z,1478856922.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:22.749Z,1478856922.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:22.829Z,1478856922.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:23.101Z,1478856923.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:23.149Z,1478856923.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:23.497Z,1478856923.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:23.553Z,1478856923.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:23.624Z,1478856923.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:23.893Z,1478856923.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:23.913Z,1478856923.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:24.032Z,1478856924.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:24.297Z,1478856924.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:24.313Z,1478856924.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:24.319Z,1478856924.319 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:24.320Z,1478856924.320 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 76
2016-11-11T09:35:24.320Z,1478856924.320 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:35:24.322Z,1478856924.322 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:24.322Z,1478856924.322 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 76
2016-11-11T09:35:24.322Z,1478856924.322 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:35:24.356Z,1478856924.356 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:35:24.356Z,1478856924.356 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:35:24.687Z,1478856924.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:24.713Z,1478856924.713 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:24.713Z,1478856924.713 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2016-11-11T09:35:24.713Z,1478856924.713 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:35:24.732Z,1478856924.732 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:35:24.732Z,1478856924.732 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:35:24.733Z,1478856924.733 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 76
2016-11-11T09:35:24.733Z,1478856924.733 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:35:24.733Z,1478856924.733 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 76
2016-11-11T09:35:24.828Z,1478856924.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:25.085Z,1478856925.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:25.128Z,1478856925.128 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:35:25.129Z,1478856925.129 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:35:25.129Z,1478856925.129 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:35:25.130Z,1478856925.130 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:35:25.130Z,1478856925.130 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:35:25.130Z,1478856925.130 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:35:25.160Z,1478856925.160 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:35:25.160Z,1478856925.160 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2016-11-11T09:35:25.485Z,1478856925.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:25.520Z,1478856925.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:35:25.520Z,1478856925.520 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:35:25.521Z,1478856925.520 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:35:25.628Z,1478856925.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:25.886Z,1478856925.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:25.914Z,1478856925.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:26.116Z,1478856926.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:26.287Z,1478856926.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:26.321Z,1478856926.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:26.685Z,1478856926.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:26.724Z,1478856926.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:26.912Z,1478856926.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:27.085Z,1478856927.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:27.119Z,1478856927.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:27.501Z,1478856927.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:27.534Z,1478856927.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:27.708Z,1478856927.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:27.916Z,1478856927.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:27.937Z,1478856927.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:28.300Z,1478856928.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:28.329Z,1478856928.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:28.504Z,1478856928.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:28.702Z,1478856928.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:28.781Z,1478856928.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:29.096Z,1478856929.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:29.111Z,1478856929.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:29.156Z,1478856929.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:29.502Z,1478856929.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:29.517Z,1478856929.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:29.885Z,1478856929.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:29.925Z,1478856929.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:29.952Z,1478856929.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:30.299Z,1478856930.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:30.306Z,1478856930.306 [PNI_TCM](ERROR): CRC does not match. Expected:0x61987 got:0x18456
2016-11-11T09:35:30.337Z,1478856930.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:30.464Z,1478856930.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:30.696Z,1478856930.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:30.733Z,1478856930.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:31.094Z,1478856931.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:31.110Z,1478856931.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:31.260Z,1478856931.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:31.493Z,1478856931.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:31.569Z,1478856931.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:31.900Z,1478856931.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:31.906Z,1478856931.906 [PNI_TCM](ERROR): CRC does not match. Expected:0x56693 got:0x17280
2016-11-11T09:35:31.929Z,1478856931.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:32.020Z,1478856932.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:32.300Z,1478856932.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:32.315Z,1478856932.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:32.708Z,1478856932.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:32.724Z,1478856932.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:32.816Z,1478856932.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:33.110Z,1478856933.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:33.126Z,1478856933.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:33.545Z,1478856933.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:33.589Z,1478856933.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:33.612Z,1478856933.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:33.912Z,1478856933.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:33.929Z,1478856933.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:34.020Z,1478856934.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:34.287Z,1478856934.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:34.315Z,1478856934.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:34.685Z,1478856934.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:34.725Z,1478856934.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:34.816Z,1478856934.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:35.086Z,1478856935.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:35.094Z,1478856935.094 [PNI_TCM](ERROR): CRC does not match. Expected:0x35544 got:0x49152
2016-11-11T09:35:35.177Z,1478856935.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:35.498Z,1478856935.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:35.578Z,1478856935.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:35.612Z,1478856935.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:35.895Z,1478856935.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:35.948Z,1478856935.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:36.020Z,1478856936.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:36.295Z,1478856936.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:36.311Z,1478856936.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:36.700Z,1478856936.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:36.751Z,1478856936.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:36.816Z,1478856936.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:37.094Z,1478856937.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:37.147Z,1478856937.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:37.493Z,1478856937.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:37.569Z,1478856937.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:37.612Z,1478856937.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:37.905Z,1478856937.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:37.925Z,1478856937.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:38.020Z,1478856938.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:38.304Z,1478856938.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:38.320Z,1478856938.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:38.708Z,1478856938.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:38.729Z,1478856938.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:38.816Z,1478856938.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:39.106Z,1478856939.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:39.122Z,1478856939.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:39.486Z,1478856939.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:39.516Z,1478856939.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:39.613Z,1478856939.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:39.904Z,1478856939.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:39.925Z,1478856939.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:40.072Z,1478856940.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:40.287Z,1478856940.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:40.317Z,1478856940.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:40.696Z,1478856940.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:40.717Z,1478856940.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:40.868Z,1478856940.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:41.096Z,1478856941.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:41.121Z,1478856941.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:41.491Z,1478856941.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:41.518Z,1478856941.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:41.664Z,1478856941.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:41.894Z,1478856941.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:41.910Z,1478856941.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:42.285Z,1478856942.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:42.322Z,1478856942.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:42.428Z,1478856942.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:42.687Z,1478856942.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:42.715Z,1478856942.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:43.107Z,1478856943.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:43.123Z,1478856943.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:43.224Z,1478856943.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:43.516Z,1478856943.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:43.531Z,1478856943.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:43.908Z,1478856943.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:43.923Z,1478856943.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:44.297Z,1478856944.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:44.326Z,1478856944.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:44.698Z,1478856944.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:44.724Z,1478856944.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:45.096Z,1478856945.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:45.116Z,1478856945.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:45.512Z,1478856945.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:45.564Z,1478856945.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:45.893Z,1478856945.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:45.921Z,1478856945.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:46.288Z,1478856946.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:46.320Z,1478856946.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:46.690Z,1478856946.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:46.718Z,1478856946.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:47.086Z,1478856947.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:47.102Z,1478856947.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:47.535Z,1478856947.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:47.588Z,1478856947.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:47.896Z,1478856947.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:47.913Z,1478856947.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:51.258Z,1478856951.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:51.329Z,1478856951.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:51.460Z,1478856951.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:51.540Z,1478856951.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:51.819Z,1478856951.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:51.859Z,1478856951.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:52.220Z,1478856952.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:52.264Z,1478856952.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:52.597Z,1478856952.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:52.629Z,1478856952.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:52.784Z,1478856952.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:52.997Z,1478856952.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:53.064Z,1478856953.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:53.088Z,1478856953.088 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T09:35:53.397Z,1478856953.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:53.424Z,1478856953.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:53.596Z,1478856953.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:53.813Z,1478856953.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:53.872Z,1478856953.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:54.036Z,1478856954.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:54.205Z,1478856954.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:54.227Z,1478856954.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:54.597Z,1478856954.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:54.633Z,1478856954.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:54.832Z,1478856954.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:54.997Z,1478856954.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:55.030Z,1478856955.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:55.401Z,1478856955.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:55.426Z,1478856955.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:55.628Z,1478856955.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:55.802Z,1478856955.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:55.829Z,1478856955.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:56.226Z,1478856956.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:56.251Z,1478856956.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:56.396Z,1478856956.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:56.615Z,1478856956.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:56.637Z,1478856956.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:57.020Z,1478856957.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:57.035Z,1478856957.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:57.193Z,1478856957.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:57.423Z,1478856957.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:57.439Z,1478856957.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:57.805Z,1478856957.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:57.831Z,1478856957.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:58.197Z,1478856958.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:58.230Z,1478856958.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:58.597Z,1478856958.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:58.637Z,1478856958.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:58.997Z,1478856958.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:59.017Z,1478856959.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:59.401Z,1478856959.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:59.421Z,1478856959.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:35:59.805Z,1478856959.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:35:59.828Z,1478856959.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:00.207Z,1478856960.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:00.223Z,1478856960.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:00.605Z,1478856960.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:00.621Z,1478856960.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:01.001Z,1478856961.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:01.024Z,1478856961.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:01.418Z,1478856961.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:01.437Z,1478856961.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:01.808Z,1478856961.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:01.823Z,1478856961.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:02.212Z,1478856962.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:02.248Z,1478856962.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:02.614Z,1478856962.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:02.640Z,1478856962.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:02.997Z,1478856962.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:03.037Z,1478856963.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:03.397Z,1478856963.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:03.437Z,1478856963.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:03.805Z,1478856963.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:03.843Z,1478856963.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:04.201Z,1478856964.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:04.221Z,1478856964.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:04.601Z,1478856964.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:04.622Z,1478856964.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:05.000Z,1478856965.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:05.029Z,1478856965.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:05.405Z,1478856965.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:05.505Z,1478856965.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:05.805Z,1478856965.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:05.861Z,1478856965.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:06.201Z,1478856966.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:06.224Z,1478856966.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:06.611Z,1478856966.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:06.658Z,1478856966.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:07.013Z,1478856967.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:07.028Z,1478856967.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:07.412Z,1478856967.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:07.469Z,1478856967.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:07.808Z,1478856967.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:07.861Z,1478856967.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:08.204Z,1478856968.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:08.219Z,1478856968.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:08.605Z,1478856968.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:08.629Z,1478856968.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:08.812Z,1478856968.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:09.006Z,1478856969.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:09.033Z,1478856969.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:09.401Z,1478856969.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:09.440Z,1478856969.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:09.608Z,1478856969.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:09.801Z,1478856969.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:09.833Z,1478856969.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:10.197Z,1478856970.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:10.238Z,1478856970.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:10.597Z,1478856970.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:10.637Z,1478856970.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:10.997Z,1478856970.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:11.030Z,1478856971.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:11.397Z,1478856971.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:11.417Z,1478856971.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:11.820Z,1478856971.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:11.853Z,1478856971.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:12.208Z,1478856972.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:12.237Z,1478856972.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:12.622Z,1478856972.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:12.641Z,1478856972.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:13.014Z,1478856973.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:13.046Z,1478856973.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:13.397Z,1478856973.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:13.425Z,1478856973.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:13.797Z,1478856973.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:13.836Z,1478856973.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:14.197Z,1478856974.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:14.233Z,1478856974.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:14.597Z,1478856974.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:14.635Z,1478856974.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:14.998Z,1478856974.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:15.013Z,1478856975.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:15.401Z,1478856975.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:15.421Z,1478856975.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:15.802Z,1478856975.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:15.835Z,1478856975.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:16.211Z,1478856976.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:16.258Z,1478856976.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:16.614Z,1478856976.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:16.633Z,1478856976.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:17.017Z,1478856977.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:17.033Z,1478856977.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:17.404Z,1478856977.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:17.462Z,1478856977.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:17.798Z,1478856977.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:17.839Z,1478856977.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:18.205Z,1478856978.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:18.225Z,1478856978.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:18.619Z,1478856978.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:18.656Z,1478856978.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:19.018Z,1478856979.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:19.053Z,1478856979.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:19.416Z,1478856979.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:19.545Z,1478856979.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:19.823Z,1478856979.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:19.862Z,1478856979.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:20.197Z,1478856980.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:20.237Z,1478856980.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:20.600Z,1478856980.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:20.650Z,1478856980.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:20.732Z,1478856980.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:20.997Z,1478856980.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:21.038Z,1478856981.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:21.397Z,1478856981.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:21.441Z,1478856981.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:21.529Z,1478856981.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:21.808Z,1478856981.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:21.881Z,1478856981.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:21.996Z,1478856981.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:22.200Z,1478856982.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:22.234Z,1478856982.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:22.597Z,1478856982.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:22.635Z,1478856982.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:22.792Z,1478856982.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:23.005Z,1478856983.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:23.044Z,1478856983.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:23.399Z,1478856983.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:23.434Z,1478856983.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:23.588Z,1478856983.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:23.816Z,1478856983.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:23.848Z,1478856983.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:24.208Z,1478856984.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:24.242Z,1478856984.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:24.614Z,1478856984.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:24.632Z,1478856984.632 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T09:36:24.653Z,1478856984.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:25.014Z,1478856985.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:25.047Z,1478856985.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:25.408Z,1478856985.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:25.423Z,1478856985.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:25.805Z,1478856985.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:25.847Z,1478856985.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:26.206Z,1478856986.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:26.214Z,1478856986.214 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T09:36:26.241Z,1478856986.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:26.611Z,1478856986.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:26.627Z,1478856986.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:27.009Z,1478856987.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:27.029Z,1478856987.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:27.397Z,1478856987.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:27.484Z,1478856987.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:27.797Z,1478856987.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:27.835Z,1478856987.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:28.208Z,1478856988.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:28.231Z,1478856988.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:28.600Z,1478856988.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:28.629Z,1478856988.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:29.024Z,1478856989.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:29.046Z,1478856989.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:29.467Z,1478856989.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:29.517Z,1478856989.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:29.824Z,1478856989.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:29.850Z,1478856989.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:30.220Z,1478856990.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:30.254Z,1478856990.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:30.606Z,1478856990.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:30.624Z,1478856990.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:31.007Z,1478856991.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:31.022Z,1478856991.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:31.402Z,1478856991.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:31.501Z,1478856991.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:31.802Z,1478856991.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:31.827Z,1478856991.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:32.197Z,1478856992.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:32.227Z,1478856992.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:32.603Z,1478856992.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:32.620Z,1478856992.620 [PNI_TCM](ERROR): CRC does not match. Expected:0x30693 got:0x49009
2016-11-11T09:36:32.645Z,1478856992.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:33.000Z,1478856993.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:33.035Z,1478856993.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:33.415Z,1478856993.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:33.483Z,1478856993.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:33.802Z,1478856993.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:33.865Z,1478856993.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:34.212Z,1478856994.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:34.273Z,1478856994.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:34.616Z,1478856994.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:34.644Z,1478856994.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:35.016Z,1478856995.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:35.032Z,1478856995.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:35.414Z,1478856995.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:35.461Z,1478856995.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:35.803Z,1478856995.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:35.825Z,1478856995.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:36.201Z,1478856996.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:36.261Z,1478856996.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:36.605Z,1478856996.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:36.659Z,1478856996.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:37.001Z,1478856997.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:37.037Z,1478856997.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:37.399Z,1478856997.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:37.437Z,1478856997.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:37.799Z,1478856997.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:37.834Z,1478856997.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:38.198Z,1478856998.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:38.226Z,1478856998.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:38.602Z,1478856998.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:38.630Z,1478856998.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:39.009Z,1478856999.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:39.024Z,1478856999.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:39.419Z,1478856999.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:39.435Z,1478856999.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:39.816Z,1478856999.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:39.837Z,1478856999.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:40.222Z,1478857000.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:40.245Z,1478857000.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:40.612Z,1478857000.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:40.645Z,1478857000.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:40.997Z,1478857000.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:41.045Z,1478857001.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:41.429Z,1478857001.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:41.475Z,1478857001.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:41.799Z,1478857001.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:41.815Z,1478857001.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:42.203Z,1478857002.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:42.218Z,1478857002.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:42.601Z,1478857002.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:42.621Z,1478857002.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:42.998Z,1478857002.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:43.013Z,1478857003.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:43.431Z,1478857003.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:43.470Z,1478857003.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:43.802Z,1478857003.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:43.833Z,1478857003.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:44.197Z,1478857004.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:44.237Z,1478857004.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:44.612Z,1478857004.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:44.640Z,1478857004.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:45.012Z,1478857005.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:45.046Z,1478857005.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:45.477Z,1478857005.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:45.492Z,1478857005.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:45.808Z,1478857005.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:45.840Z,1478857005.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:46.201Z,1478857006.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:46.221Z,1478857006.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:46.604Z,1478857006.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:46.626Z,1478857006.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:47.004Z,1478857007.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:47.019Z,1478857007.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:47.028Z,1478857007.028 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T09:31:46.7Z
2016-11-11T09:36:47.029Z,1478857007.029 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T09:36:47.029Z,1478857007.029 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T09:36:47.441Z,1478857007.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:47.486Z,1478857007.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:48.259Z,1478857008.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:48.295Z,1478857008.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:48.378Z,1478857008.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:48.417Z,1478857008.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:51.754Z,1478857011.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:51.829Z,1478857011.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:51.946Z,1478857011.946 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20161111T044527/Courier0112.lzma
2016-11-11T09:36:51.991Z,1478857011.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:52.014Z,1478857012.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:52.368Z,1478857012.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:52.436Z,1478857012.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:52.729Z,1478857012.729 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0112.lzma.bak
2016-11-11T09:36:52.729Z,1478857012.729 [DataOverHttps](INFO): SBD MOMSN=4555283
2016-11-11T09:36:52.768Z,1478857012.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:52.812Z,1478857012.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:54.249Z,1478857014.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:54.309Z,1478857014.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:54.418Z,1478857014.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:54.456Z,1478857014.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:57.998Z,1478857017.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:58.049Z,1478857018.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:58.162Z,1478857018.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:58.178Z,1478857018.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:58.524Z,1478857018.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:58.557Z,1478857018.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:58.920Z,1478857018.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:58.953Z,1478857018.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:59.309Z,1478857019.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:59.329Z,1478857019.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:36:59.717Z,1478857019.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:36:59.733Z,1478857019.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:03.191Z,1478857023.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:03.226Z,1478857023.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:03.275Z,1478857023.275 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0113.lzma
2016-11-11T09:37:03.335Z,1478857023.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:03.354Z,1478857023.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:03.703Z,1478857023.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:03.737Z,1478857023.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:04.061Z,1478857024.061 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0113.lzma.bak
2016-11-11T09:37:04.061Z,1478857024.061 [DataOverHttps](INFO): SBD MOMSN=4555286
2016-11-11T09:37:04.104Z,1478857024.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:04.126Z,1478857024.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:05.380Z,1478857025.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:05.396Z,1478857025.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:05.405Z,1478857025.405 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T09:37:05.405Z,1478857025.405 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T09:37:05.405Z,1478857025.405 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T09:37:05.497Z,1478857025.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:05.537Z,1478857025.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:08.891Z,1478857028.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:08.907Z,1478857028.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:09.017Z,1478857029.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:09.036Z,1478857029.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:09.415Z,1478857029.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:09.454Z,1478857029.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:09.808Z,1478857029.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:09.865Z,1478857029.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:10.189Z,1478857030.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:10.253Z,1478857030.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:10.590Z,1478857030.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:10.621Z,1478857030.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:10.989Z,1478857030.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:11.041Z,1478857031.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:11.397Z,1478857031.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:11.426Z,1478857031.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:11.793Z,1478857031.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:11.845Z,1478857031.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:12.190Z,1478857032.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:12.241Z,1478857032.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:12.590Z,1478857032.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:12.625Z,1478857032.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:12.993Z,1478857032.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:13.008Z,1478857033.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:13.398Z,1478857033.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:13.445Z,1478857033.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:13.816Z,1478857033.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:13.851Z,1478857033.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:14.202Z,1478857034.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:14.230Z,1478857034.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:14.612Z,1478857034.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:14.627Z,1478857034.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:15.011Z,1478857035.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:15.027Z,1478857035.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:15.407Z,1478857035.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:15.440Z,1478857035.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:15.790Z,1478857035.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:15.826Z,1478857035.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:16.190Z,1478857036.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:16.225Z,1478857036.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:16.589Z,1478857036.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:16.625Z,1478857036.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:16.989Z,1478857036.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:17.025Z,1478857037.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:17.390Z,1478857037.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:17.468Z,1478857037.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:17.797Z,1478857037.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:17.829Z,1478857037.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:18.189Z,1478857038.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:18.204Z,1478857038.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:18.593Z,1478857038.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:18.613Z,1478857038.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:19.008Z,1478857039.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:19.039Z,1478857039.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:19.404Z,1478857039.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:19.425Z,1478857039.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:19.821Z,1478857039.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:19.862Z,1478857039.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:20.208Z,1478857040.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:20.223Z,1478857040.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:20.590Z,1478857040.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:20.617Z,1478857040.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:20.989Z,1478857040.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:21.006Z,1478857041.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:21.393Z,1478857041.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:21.413Z,1478857041.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:21.842Z,1478857041.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:21.902Z,1478857041.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:22.213Z,1478857042.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:22.243Z,1478857042.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:22.597Z,1478857042.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:22.617Z,1478857042.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:22.996Z,1478857042.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:23.069Z,1478857043.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:23.397Z,1478857043.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:23.413Z,1478857043.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:23.793Z,1478857043.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:23.821Z,1478857043.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:24.204Z,1478857044.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:24.289Z,1478857044.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:24.608Z,1478857044.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:24.644Z,1478857044.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:25.004Z,1478857045.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:25.057Z,1478857045.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:25.404Z,1478857045.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:25.419Z,1478857045.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:25.801Z,1478857045.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:25.851Z,1478857045.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:26.193Z,1478857046.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:26.241Z,1478857046.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:26.590Z,1478857046.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:26.605Z,1478857046.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:26.993Z,1478857046.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:27.009Z,1478857047.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:27.394Z,1478857047.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:27.450Z,1478857047.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:27.793Z,1478857047.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:27.809Z,1478857047.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:28.193Z,1478857048.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:28.209Z,1478857048.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:28.589Z,1478857048.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:28.609Z,1478857048.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:28.993Z,1478857048.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:29.008Z,1478857049.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:29.404Z,1478857049.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:29.428Z,1478857049.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:29.808Z,1478857049.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:29.824Z,1478857049.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:30.204Z,1478857050.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:30.219Z,1478857050.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:30.604Z,1478857050.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:30.620Z,1478857050.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:30.989Z,1478857050.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:31.014Z,1478857051.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:31.394Z,1478857051.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:31.416Z,1478857051.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:31.787Z,1478857051.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:31.803Z,1478857051.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:32.194Z,1478857052.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:32.210Z,1478857052.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:32.594Z,1478857052.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:32.610Z,1478857052.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:32.989Z,1478857052.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:33.009Z,1478857053.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:33.393Z,1478857053.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:33.417Z,1478857053.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:33.794Z,1478857053.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:33.820Z,1478857053.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:34.189Z,1478857054.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:34.210Z,1478857054.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:34.609Z,1478857054.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:34.624Z,1478857054.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:35.008Z,1478857055.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:35.030Z,1478857055.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:35.408Z,1478857055.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:35.425Z,1478857055.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:35.811Z,1478857055.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:35.831Z,1478857055.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:36.208Z,1478857056.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:36.223Z,1478857056.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:36.593Z,1478857056.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:36.609Z,1478857056.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:36.993Z,1478857056.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:37.073Z,1478857057.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:37.393Z,1478857057.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:37.408Z,1478857057.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:37.793Z,1478857057.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:37.810Z,1478857057.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:38.197Z,1478857058.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:38.261Z,1478857058.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:38.593Z,1478857058.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:38.609Z,1478857058.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:39.002Z,1478857059.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:39.049Z,1478857059.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:39.393Z,1478857059.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:39.409Z,1478857059.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:39.809Z,1478857059.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:39.857Z,1478857059.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:40.204Z,1478857060.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:40.249Z,1478857060.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:40.609Z,1478857060.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:40.624Z,1478857060.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:41.002Z,1478857061.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:41.025Z,1478857061.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:41.389Z,1478857061.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:41.410Z,1478857061.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:41.789Z,1478857061.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:41.817Z,1478857061.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:42.190Z,1478857062.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:42.214Z,1478857062.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:42.590Z,1478857062.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:42.610Z,1478857062.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:43.002Z,1478857063.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:43.025Z,1478857063.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:43.390Z,1478857063.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:43.417Z,1478857063.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:43.790Z,1478857063.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:43.822Z,1478857063.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:44.190Z,1478857064.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:44.217Z,1478857064.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:44.590Z,1478857064.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:44.617Z,1478857064.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:45.004Z,1478857065.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:45.029Z,1478857065.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:45.451Z,1478857065.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:45.507Z,1478857065.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:45.812Z,1478857065.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:45.827Z,1478857065.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:46.207Z,1478857066.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:46.223Z,1478857066.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:46.590Z,1478857066.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:46.626Z,1478857066.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:46.991Z,1478857066.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:47.042Z,1478857067.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:47.391Z,1478857067.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:47.432Z,1478857067.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:47.798Z,1478857067.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:47.850Z,1478857067.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:48.190Z,1478857068.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:48.225Z,1478857068.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:48.599Z,1478857068.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:48.628Z,1478857068.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:48.991Z,1478857068.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:49.022Z,1478857069.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:49.392Z,1478857069.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:49.426Z,1478857069.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:49.796Z,1478857069.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:49.854Z,1478857069.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:50.221Z,1478857070.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:50.258Z,1478857070.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:50.604Z,1478857070.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:50.661Z,1478857070.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:51.006Z,1478857071.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:51.050Z,1478857071.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:51.416Z,1478857071.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:51.468Z,1478857071.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:51.801Z,1478857071.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:51.890Z,1478857071.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:52.191Z,1478857072.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:52.282Z,1478857072.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:52.615Z,1478857072.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:52.656Z,1478857072.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:52.999Z,1478857073.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:53.048Z,1478857073.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:53.390Z,1478857073.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:53.479Z,1478857073.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:53.790Z,1478857073.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:53.846Z,1478857073.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:54.191Z,1478857074.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:54.257Z,1478857074.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:54.590Z,1478857074.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:54.606Z,1478857074.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:54.000Z,1478857075.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:55.038Z,1478857075.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:55.422Z,1478857075.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:55.467Z,1478857075.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:55.807Z,1478857075.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:55.823Z,1478857075.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:56.219Z,1478857076.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:56.258Z,1478857076.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:56.612Z,1478857076.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:56.641Z,1478857076.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:56.989Z,1478857076.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:57.025Z,1478857077.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:57.410Z,1478857077.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:57.426Z,1478857077.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:57.806Z,1478857077.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:57.833Z,1478857077.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:58.189Z,1478857078.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:58.225Z,1478857078.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:58.619Z,1478857078.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:58.636Z,1478857078.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:58.989Z,1478857078.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:59.009Z,1478857079.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:59.421Z,1478857079.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:59.470Z,1478857079.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:37:59.802Z,1478857079.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:37:59.846Z,1478857079.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:00.199Z,1478857080.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:00.221Z,1478857080.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:00.614Z,1478857080.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:00.639Z,1478857080.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:01.001Z,1478857081.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:01.036Z,1478857081.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:01.406Z,1478857081.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:01.441Z,1478857081.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:01.814Z,1478857081.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:01.862Z,1478857081.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:02.206Z,1478857082.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:02.234Z,1478857082.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:02.592Z,1478857082.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:02.644Z,1478857082.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:02.991Z,1478857082.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:03.031Z,1478857083.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:03.400Z,1478857083.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:03.433Z,1478857083.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:03.798Z,1478857083.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:03.869Z,1478857083.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:04.192Z,1478857084.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:04.240Z,1478857084.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:04.590Z,1478857084.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:04.614Z,1478857084.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:04.996Z,1478857084.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:05.048Z,1478857085.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:05.397Z,1478857085.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:05.422Z,1478857085.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:05.807Z,1478857085.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:05.842Z,1478857085.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:11.908Z,1478857091.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:11.928Z,1478857091.928 [BPC1](ERROR): Failed to receive battery data
2016-11-11T09:38:11.928Z,1478857091.928 [BPC1] Communications Fault, FailCount= 1
2016-11-11T09:38:11.928Z,1478857091.928 [BPC1](ERROR): Communications Fault
2016-11-11T09:38:11.936Z,1478857091.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:11.956Z,1478857091.957 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T09:38:12.049Z,1478857092.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:12.073Z,1478857092.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:12.402Z,1478857092.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:12.430Z,1478857092.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:12.796Z,1478857092.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:12.841Z,1478857092.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:12.868Z,1478857092.868 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:38:12.868Z,1478857092.868 [BPC1] No Fault, FailCount= 1
2016-11-11T09:38:13.194Z,1478857093.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:13.286Z,1478857093.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:13.592Z,1478857093.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:13.645Z,1478857093.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:14.001Z,1478857094.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:14.016Z,1478857094.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:14.402Z,1478857094.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:14.435Z,1478857094.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:14.785Z,1478857094.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:14.821Z,1478857094.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:15.185Z,1478857095.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:15.225Z,1478857095.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:15.594Z,1478857095.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:15.621Z,1478857095.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:15.999Z,1478857095.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:16.041Z,1478857096.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:16.407Z,1478857096.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:16.442Z,1478857096.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:16.803Z,1478857096.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:16.835Z,1478857096.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:17.204Z,1478857097.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:17.220Z,1478857097.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:17.602Z,1478857097.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:17.636Z,1478857097.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:17.985Z,1478857097.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:18.025Z,1478857098.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:18.385Z,1478857098.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:18.425Z,1478857098.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:18.819Z,1478857098.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:18.866Z,1478857098.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:19.207Z,1478857099.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:19.342Z,1478857099.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:19.596Z,1478857099.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:19.637Z,1478857099.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:19.999Z,1478857099.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:20.006Z,1478857100.006 [PNI_TCM](ERROR): CRC does not match. Expected:0x52948 got:0x34588
2016-11-11T09:38:20.054Z,1478857100.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:20.395Z,1478857100.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:20.411Z,1478857100.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:20.797Z,1478857100.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:20.829Z,1478857100.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:21.194Z,1478857101.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:21.262Z,1478857101.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:21.608Z,1478857101.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:21.641Z,1478857101.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:22.009Z,1478857102.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:22.045Z,1478857102.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:22.419Z,1478857102.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:22.451Z,1478857102.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:22.831Z,1478857102.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:22.863Z,1478857102.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:23.196Z,1478857103.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:23.249Z,1478857103.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:23.599Z,1478857103.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:23.623Z,1478857103.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:24.007Z,1478857104.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:24.032Z,1478857104.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:24.420Z,1478857104.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:24.452Z,1478857104.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:24.787Z,1478857104.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:24.829Z,1478857104.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:25.198Z,1478857105.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:25.275Z,1478857105.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:25.293Z,1478857105.293 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:25.293Z,1478857105.293 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 77
2016-11-11T09:38:25.293Z,1478857105.293 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:38:25.299Z,1478857105.299 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:25.299Z,1478857105.299 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 77
2016-11-11T09:38:25.300Z,1478857105.300 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:38:25.344Z,1478857105.344 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:38:25.344Z,1478857105.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:38:25.625Z,1478857105.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:25.693Z,1478857105.693 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:25.693Z,1478857105.693 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77
2016-11-11T09:38:25.693Z,1478857105.694 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:38:25.725Z,1478857105.724 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:38:25.725Z,1478857105.725 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:38:25.725Z,1478857105.725 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 77
2016-11-11T09:38:25.725Z,1478857105.725 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:38:25.725Z,1478857105.726 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 77
2016-11-11T09:38:25.985Z,1478857105.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:26.029Z,1478857106.029 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:38:26.029Z,1478857106.029 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:38:26.029Z,1478857106.029 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:38:26.030Z,1478857106.030 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:38:26.030Z,1478857106.030 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:38:26.031Z,1478857106.031 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:38:26.044Z,1478857106.044 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:38:26.044Z,1478857106.044 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77
2016-11-11T09:38:26.400Z,1478857106.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:26.407Z,1478857106.407 [PNI_TCM](ERROR): CRC does not match. Expected:0x34856 got:0x16913
2016-11-11T09:38:26.464Z,1478857106.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:38:26.464Z,1478857106.464 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:38:26.465Z,1478857106.465 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:38:26.802Z,1478857106.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:26.817Z,1478857106.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:27.202Z,1478857107.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:27.253Z,1478857107.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:27.609Z,1478857107.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:27.661Z,1478857107.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:28.006Z,1478857108.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:28.021Z,1478857108.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:28.398Z,1478857108.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:28.417Z,1478857108.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:28.576Z,1478857108.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:28.796Z,1478857108.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:28.822Z,1478857108.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:29.195Z,1478857109.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:29.227Z,1478857109.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:29.372Z,1478857109.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:29.607Z,1478857109.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:29.622Z,1478857109.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:29.993Z,1478857109.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:30.008Z,1478857110.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:30.397Z,1478857110.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:30.436Z,1478857110.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:30.798Z,1478857110.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:30.813Z,1478857110.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:31.196Z,1478857111.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:31.224Z,1478857111.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:31.592Z,1478857111.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:31.623Z,1478857111.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:32.003Z,1478857112.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:32.032Z,1478857112.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:32.400Z,1478857112.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:32.433Z,1478857112.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:32.806Z,1478857112.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:32.838Z,1478857112.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:33.211Z,1478857113.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:33.271Z,1478857113.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:33.592Z,1478857113.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:33.630Z,1478857113.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:33.996Z,1478857113.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:34.018Z,1478857114.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:34.398Z,1478857114.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:34.421Z,1478857114.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:34.785Z,1478857114.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:34.817Z,1478857114.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:35.186Z,1478857115.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:35.266Z,1478857115.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:35.617Z,1478857115.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:35.650Z,1478857115.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:36.004Z,1478857116.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:36.028Z,1478857116.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:36.390Z,1478857116.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:36.426Z,1478857116.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:36.786Z,1478857116.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:36.825Z,1478857116.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:37.250Z,1478857117.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:37.278Z,1478857117.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:37.614Z,1478857117.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:37.630Z,1478857117.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:38.013Z,1478857118.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:38.033Z,1478857118.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:38.411Z,1478857118.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:38.427Z,1478857118.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:38.801Z,1478857118.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:38.823Z,1478857118.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:39.220Z,1478857119.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:39.288Z,1478857119.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:39.604Z,1478857119.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:39.681Z,1478857119.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:39.995Z,1478857119.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:40.053Z,1478857120.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:40.406Z,1478857120.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:40.425Z,1478857120.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:40.785Z,1478857120.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:40.851Z,1478857120.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:41.220Z,1478857121.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:41.255Z,1478857121.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:41.610Z,1478857121.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:41.650Z,1478857121.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:41.993Z,1478857121.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:42.049Z,1478857122.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:42.409Z,1478857122.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:42.429Z,1478857122.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:42.596Z,1478857122.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:42.806Z,1478857122.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:42.821Z,1478857122.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:43.212Z,1478857123.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:43.227Z,1478857123.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:43.392Z,1478857123.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:43.614Z,1478857123.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:43.629Z,1478857123.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:43.985Z,1478857123.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:44.026Z,1478857124.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:44.385Z,1478857124.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:44.419Z,1478857124.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:44.790Z,1478857124.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:44.805Z,1478857124.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:45.187Z,1478857125.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:45.223Z,1478857125.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:45.591Z,1478857125.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:45.613Z,1478857125.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:45.997Z,1478857125.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:46.025Z,1478857126.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:46.390Z,1478857126.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:46.417Z,1478857126.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:46.785Z,1478857126.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:46.821Z,1478857126.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:47.227Z,1478857127.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:47.269Z,1478857127.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:47.602Z,1478857127.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:47.629Z,1478857127.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:48.002Z,1478857128.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:48.030Z,1478857128.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:48.428Z,1478857128.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:48.449Z,1478857128.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:48.802Z,1478857128.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:48.832Z,1478857128.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:49.228Z,1478857129.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:49.270Z,1478857129.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:49.592Z,1478857129.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:49.630Z,1478857129.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:49.985Z,1478857129.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:50.033Z,1478857130.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:50.385Z,1478857130.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:50.403Z,1478857130.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:50.791Z,1478857130.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:50.806Z,1478857130.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:51.249Z,1478857131.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:51.287Z,1478857131.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:51.590Z,1478857131.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:51.618Z,1478857131.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:51.998Z,1478857131.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:52.014Z,1478857132.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:52.416Z,1478857132.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:52.447Z,1478857132.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:52.822Z,1478857132.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:52.880Z,1478857132.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:53.237Z,1478857133.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:53.274Z,1478857133.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:53.608Z,1478857133.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:53.635Z,1478857133.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:54.004Z,1478857134.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:54.031Z,1478857134.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:54.400Z,1478857134.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:54.461Z,1478857134.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:54.795Z,1478857134.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:54.810Z,1478857134.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:55.191Z,1478857135.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:55.206Z,1478857135.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:55.605Z,1478857135.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:55.625Z,1478857135.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:55.985Z,1478857135.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:56.023Z,1478857136.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:56.385Z,1478857136.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:56.454Z,1478857136.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:56.544Z,1478857136.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:56.785Z,1478857136.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:56.813Z,1478857136.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:57.201Z,1478857137.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:57.210Z,1478857137.210 [BPC1](ERROR): Failed to receive battery data
2016-11-11T09:38:57.210Z,1478857137.210 [BPC1] Communications Fault, FailCount= 1
2016-11-11T09:38:57.210Z,1478857137.210 [BPC1](ERROR): Communications Fault
2016-11-11T09:38:57.242Z,1478857137.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:57.279Z,1478857137.279 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T09:38:57.341Z,1478857137.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:57.585Z,1478857137.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:57.660Z,1478857137.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:58.022Z,1478857138.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:58.058Z,1478857138.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:58.407Z,1478857138.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:58.438Z,1478857138.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:58.470Z,1478857138.470 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:38:58.470Z,1478857138.470 [BPC1] No Fault, FailCount= 1
2016-11-11T09:38:58.802Z,1478857138.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:58.877Z,1478857138.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:59.218Z,1478857139.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:59.275Z,1478857139.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:59.594Z,1478857139.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:38:59.609Z,1478857139.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:38:59.998Z,1478857139.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:00.014Z,1478857140.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:00.385Z,1478857140.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:00.417Z,1478857140.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:00.786Z,1478857140.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:00.822Z,1478857140.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:01.214Z,1478857141.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:01.254Z,1478857141.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:01.592Z,1478857141.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:01.607Z,1478857141.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:01.994Z,1478857141.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:02.036Z,1478857142.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:02.392Z,1478857142.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:02.408Z,1478857142.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:02.792Z,1478857142.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:02.807Z,1478857142.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:03.232Z,1478857143.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:03.261Z,1478857143.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:03.602Z,1478857143.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:03.618Z,1478857143.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:04.006Z,1478857144.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:04.025Z,1478857144.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:04.410Z,1478857144.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:04.429Z,1478857144.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:04.786Z,1478857144.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:04.825Z,1478857144.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:05.206Z,1478857145.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:05.251Z,1478857145.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:05.586Z,1478857145.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:05.627Z,1478857145.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:05.986Z,1478857145.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:06.021Z,1478857146.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:09.669Z,1478857149.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:09.685Z,1478857149.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:09.804Z,1478857149.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:09.837Z,1478857149.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:10.148Z,1478857150.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:10.206Z,1478857150.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:10.553Z,1478857150.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:10.587Z,1478857150.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:10.937Z,1478857150.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:10.957Z,1478857150.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:11.337Z,1478857151.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:11.390Z,1478857151.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:11.740Z,1478857151.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:11.755Z,1478857151.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:12.136Z,1478857152.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:12.184Z,1478857152.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:12.536Z,1478857152.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:12.590Z,1478857152.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:12.945Z,1478857152.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:12.965Z,1478857152.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:13.336Z,1478857153.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:13.364Z,1478857153.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:13.749Z,1478857153.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:13.764Z,1478857153.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:14.149Z,1478857154.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:14.169Z,1478857154.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:14.555Z,1478857154.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:14.570Z,1478857154.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:14.955Z,1478857154.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:14.971Z,1478857154.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:15.356Z,1478857155.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:15.377Z,1478857155.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:15.751Z,1478857155.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:15.767Z,1478857155.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:16.141Z,1478857156.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:16.167Z,1478857156.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:16.533Z,1478857156.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:16.570Z,1478857156.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:16.917Z,1478857156.917 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T09:39:16.934Z,1478857156.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:16.975Z,1478857156.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:17.333Z,1478857157.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:17.369Z,1478857157.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:17.734Z,1478857157.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:17.770Z,1478857157.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:18.133Z,1478857158.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:18.157Z,1478857158.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:18.533Z,1478857158.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:18.549Z,1478857158.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:18.934Z,1478857158.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:18.953Z,1478857158.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:19.341Z,1478857159.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:19.377Z,1478857159.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:19.733Z,1478857159.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:19.777Z,1478857159.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:20.137Z,1478857160.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:20.152Z,1478857160.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:20.538Z,1478857160.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:20.562Z,1478857160.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:20.937Z,1478857160.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:20.969Z,1478857160.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:21.348Z,1478857161.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:21.364Z,1478857161.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:21.746Z,1478857161.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:21.762Z,1478857161.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:22.134Z,1478857162.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:22.169Z,1478857162.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:22.516Z,1478857162.516 [NAL9602](INFO): Powering down
2016-11-11T09:39:22.552Z,1478857162.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:22.575Z,1478857162.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:22.933Z,1478857162.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:22.965Z,1478857162.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:23.341Z,1478857163.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:23.368Z,1478857163.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:23.733Z,1478857163.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:23.793Z,1478857163.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:24.133Z,1478857164.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:24.172Z,1478857164.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:24.533Z,1478857164.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:24.586Z,1478857164.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:24.933Z,1478857164.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:24.977Z,1478857164.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:25.333Z,1478857165.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:25.386Z,1478857165.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:25.733Z,1478857165.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:25.757Z,1478857165.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:26.140Z,1478857166.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:26.192Z,1478857166.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:26.540Z,1478857166.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:26.594Z,1478857166.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:26.945Z,1478857166.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:26.965Z,1478857166.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:27.340Z,1478857167.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:27.361Z,1478857167.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:27.744Z,1478857167.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:27.760Z,1478857167.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:28.140Z,1478857168.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:28.164Z,1478857168.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:28.533Z,1478857168.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:28.566Z,1478857168.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:28.933Z,1478857168.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:28.968Z,1478857168.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:29.333Z,1478857169.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:29.369Z,1478857169.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:29.733Z,1478857169.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:29.765Z,1478857169.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:30.133Z,1478857170.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:30.165Z,1478857170.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:30.533Z,1478857170.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:30.565Z,1478857170.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:30.933Z,1478857170.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:30.970Z,1478857170.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:31.333Z,1478857171.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:31.358Z,1478857171.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:31.733Z,1478857171.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:31.765Z,1478857171.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:32.133Z,1478857172.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:32.166Z,1478857172.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:32.533Z,1478857172.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:32.565Z,1478857172.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:32.933Z,1478857172.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:32.967Z,1478857172.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:33.333Z,1478857173.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:33.365Z,1478857173.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:33.737Z,1478857173.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:33.769Z,1478857173.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:34.133Z,1478857174.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:34.165Z,1478857174.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:34.533Z,1478857174.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:34.561Z,1478857174.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:34.937Z,1478857174.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:34.969Z,1478857174.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:35.341Z,1478857175.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:35.366Z,1478857175.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:35.737Z,1478857175.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:35.769Z,1478857175.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:36.137Z,1478857176.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:36.169Z,1478857176.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:36.533Z,1478857176.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:36.548Z,1478857176.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:36.937Z,1478857176.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:36.952Z,1478857176.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:37.345Z,1478857177.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:37.394Z,1478857177.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:37.741Z,1478857177.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:37.756Z,1478857177.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:38.140Z,1478857178.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:38.155Z,1478857178.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:38.544Z,1478857178.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:38.597Z,1478857178.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:38.936Z,1478857178.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:38.974Z,1478857178.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:39.340Z,1478857179.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:39.403Z,1478857179.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:39.739Z,1478857179.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:39.758Z,1478857179.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:40.144Z,1478857180.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:40.199Z,1478857180.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:40.541Z,1478857180.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:40.598Z,1478857180.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:40.936Z,1478857180.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:40.968Z,1478857180.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:41.333Z,1478857181.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:41.358Z,1478857181.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:41.748Z,1478857181.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:41.763Z,1478857181.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:42.133Z,1478857182.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:42.163Z,1478857182.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:42.533Z,1478857182.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:42.567Z,1478857182.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:42.937Z,1478857182.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:42.969Z,1478857182.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:43.333Z,1478857183.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:43.367Z,1478857183.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:43.733Z,1478857183.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:43.765Z,1478857183.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:44.137Z,1478857184.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:44.169Z,1478857184.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:44.533Z,1478857184.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:44.565Z,1478857184.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:44.933Z,1478857184.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:44.967Z,1478857184.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:45.333Z,1478857185.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:45.358Z,1478857185.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:45.733Z,1478857185.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:45.758Z,1478857185.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:46.133Z,1478857186.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:46.166Z,1478857186.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:46.537Z,1478857186.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:46.573Z,1478857186.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:46.933Z,1478857186.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:46.965Z,1478857186.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:47.341Z,1478857187.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:47.373Z,1478857187.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:47.748Z,1478857187.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:47.763Z,1478857187.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:48.144Z,1478857188.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:48.165Z,1478857188.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:48.536Z,1478857188.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:48.559Z,1478857188.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:48.933Z,1478857188.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:48.968Z,1478857188.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:49.349Z,1478857189.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:49.369Z,1478857189.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:49.733Z,1478857189.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:49.761Z,1478857189.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:50.133Z,1478857190.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:50.169Z,1478857190.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:50.538Z,1478857190.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:50.554Z,1478857190.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:50.941Z,1478857190.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:50.956Z,1478857190.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:51.345Z,1478857191.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:51.401Z,1478857191.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:51.740Z,1478857191.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:51.756Z,1478857191.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:52.140Z,1478857192.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:52.155Z,1478857192.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:52.536Z,1478857192.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:52.594Z,1478857192.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:52.933Z,1478857192.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:52.957Z,1478857192.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:53.337Z,1478857193.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:53.363Z,1478857193.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:53.741Z,1478857193.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:53.767Z,1478857193.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:54.133Z,1478857194.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:54.181Z,1478857194.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:54.533Z,1478857194.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:54.568Z,1478857194.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:54.933Z,1478857194.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:54.985Z,1478857194.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:55.333Z,1478857195.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:55.369Z,1478857195.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:55.738Z,1478857195.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:55.778Z,1478857195.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:56.133Z,1478857196.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:56.161Z,1478857196.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:56.540Z,1478857196.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:56.556Z,1478857196.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:56.939Z,1478857196.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:56.958Z,1478857196.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:57.333Z,1478857197.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:57.360Z,1478857197.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:57.749Z,1478857197.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:57.765Z,1478857197.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:58.134Z,1478857198.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:58.173Z,1478857198.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:58.533Z,1478857198.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:58.557Z,1478857198.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:58.933Z,1478857198.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:58.965Z,1478857198.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:59.345Z,1478857199.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:59.376Z,1478857199.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:39:59.738Z,1478857199.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:39:59.754Z,1478857199.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:00.138Z,1478857200.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:00.154Z,1478857200.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:00.536Z,1478857200.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:00.558Z,1478857200.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:00.940Z,1478857200.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:00.955Z,1478857200.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:01.348Z,1478857201.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:01.364Z,1478857201.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:01.741Z,1478857201.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:01.756Z,1478857201.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:02.133Z,1478857202.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:02.167Z,1478857202.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:02.533Z,1478857202.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:02.565Z,1478857202.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:02.933Z,1478857202.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:02.958Z,1478857202.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:03.348Z,1478857203.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:03.363Z,1478857203.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:03.733Z,1478857203.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:03.765Z,1478857203.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:04.133Z,1478857204.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:04.165Z,1478857204.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:04.533Z,1478857204.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:04.569Z,1478857204.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:04.933Z,1478857204.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:04.970Z,1478857204.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:05.341Z,1478857205.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:05.366Z,1478857205.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:05.733Z,1478857205.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:05.773Z,1478857205.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:06.133Z,1478857206.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:06.149Z,1478857206.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:09.474Z,1478857209.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:09.624Z,1478857209.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:09.712Z,1478857209.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:09.741Z,1478857209.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:10.101Z,1478857210.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:10.121Z,1478857210.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:10.495Z,1478857210.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:10.534Z,1478857210.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:10.896Z,1478857210.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:10.916Z,1478857210.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:11.297Z,1478857211.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:11.354Z,1478857211.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:11.692Z,1478857211.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:11.749Z,1478857211.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:12.096Z,1478857212.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:12.112Z,1478857212.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:12.489Z,1478857212.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:12.531Z,1478857212.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:12.889Z,1478857212.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:12.923Z,1478857212.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:13.304Z,1478857213.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:13.320Z,1478857213.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:13.693Z,1478857213.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:13.725Z,1478857213.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:14.089Z,1478857214.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:14.129Z,1478857214.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:14.489Z,1478857214.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:14.521Z,1478857214.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:14.889Z,1478857214.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:14.921Z,1478857214.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:15.300Z,1478857215.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:15.323Z,1478857215.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:15.697Z,1478857215.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:15.733Z,1478857215.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:16.089Z,1478857216.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:16.132Z,1478857216.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:16.489Z,1478857216.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:16.529Z,1478857216.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:16.889Z,1478857216.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:16.925Z,1478857216.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:17.297Z,1478857217.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:17.329Z,1478857217.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:17.693Z,1478857217.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:17.708Z,1478857217.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:18.093Z,1478857218.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:18.108Z,1478857218.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:18.496Z,1478857218.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:18.512Z,1478857218.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:18.895Z,1478857218.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:18.917Z,1478857218.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:19.301Z,1478857219.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:19.317Z,1478857219.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:19.697Z,1478857219.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:19.725Z,1478857219.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:20.096Z,1478857220.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:20.117Z,1478857220.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:20.489Z,1478857220.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:20.524Z,1478857220.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:20.901Z,1478857220.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:20.916Z,1478857220.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:21.297Z,1478857221.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:21.330Z,1478857221.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:21.689Z,1478857221.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:21.725Z,1478857221.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:22.093Z,1478857222.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:22.108Z,1478857222.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:22.495Z,1478857222.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:22.537Z,1478857222.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:22.901Z,1478857222.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:22.916Z,1478857222.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:23.292Z,1478857223.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:23.320Z,1478857223.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:23.701Z,1478857223.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:23.757Z,1478857223.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:24.091Z,1478857224.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:24.124Z,1478857224.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:24.496Z,1478857224.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:24.534Z,1478857224.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:24.896Z,1478857224.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:24.917Z,1478857224.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:25.289Z,1478857225.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:25.352Z,1478857225.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:25.696Z,1478857225.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:25.752Z,1478857225.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:26.097Z,1478857226.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:26.112Z,1478857226.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:26.500Z,1478857226.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:26.516Z,1478857226.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:26.889Z,1478857226.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:26.923Z,1478857226.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:27.304Z,1478857227.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:27.319Z,1478857227.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:27.693Z,1478857227.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:27.744Z,1478857227.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:28.089Z,1478857228.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:28.109Z,1478857228.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:28.489Z,1478857228.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:28.504Z,1478857228.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:28.889Z,1478857228.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:28.909Z,1478857228.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:29.301Z,1478857229.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:29.341Z,1478857229.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:29.696Z,1478857229.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:29.711Z,1478857229.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:30.097Z,1478857230.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:30.121Z,1478857230.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:30.496Z,1478857230.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:30.517Z,1478857230.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:30.898Z,1478857230.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:30.914Z,1478857230.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:31.306Z,1478857231.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:31.321Z,1478857231.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:31.689Z,1478857231.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:31.724Z,1478857231.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:32.090Z,1478857232.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:32.125Z,1478857232.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:32.489Z,1478857232.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:32.521Z,1478857232.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:32.889Z,1478857232.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:32.925Z,1478857232.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:33.289Z,1478857233.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:33.324Z,1478857233.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:33.689Z,1478857233.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:33.725Z,1478857233.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:34.089Z,1478857234.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:34.127Z,1478857234.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:34.489Z,1478857234.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:34.528Z,1478857234.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:34.889Z,1478857234.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:34.921Z,1478857234.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:35.293Z,1478857235.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:35.308Z,1478857235.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:35.694Z,1478857235.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:35.713Z,1478857235.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:36.092Z,1478857236.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:36.145Z,1478857236.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:36.492Z,1478857236.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:36.520Z,1478857236.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:36.899Z,1478857236.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:36.915Z,1478857236.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:37.296Z,1478857237.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:37.305Z,1478857237.305 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T09:40:37.305Z,1478857237.305 [BPC1] Data Fault, FailCount= 1
2016-11-11T09:40:37.305Z,1478857237.305 [BPC1](ERROR): Data Fault
2016-11-11T09:40:37.313Z,1478857237.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:37.334Z,1478857237.334 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:40:37.704Z,1478857237.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:37.720Z,1478857237.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:38.096Z,1478857238.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:38.119Z,1478857238.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:38.489Z,1478857238.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:38.521Z,1478857238.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:38.541Z,1478857238.542 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:40:38.542Z,1478857238.542 [BPC1] No Fault, FailCount= 1
2016-11-11T09:40:38.889Z,1478857238.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:38.966Z,1478857238.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:39.289Z,1478857239.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:39.341Z,1478857239.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:39.689Z,1478857239.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:39.716Z,1478857239.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:40.089Z,1478857240.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:40.132Z,1478857240.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:40.493Z,1478857240.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:40.529Z,1478857240.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:40.889Z,1478857240.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:40.930Z,1478857240.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:41.301Z,1478857241.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:41.316Z,1478857241.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:41.701Z,1478857241.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:41.715Z,1478857241.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:42.095Z,1478857242.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:42.111Z,1478857242.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:42.496Z,1478857242.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:42.517Z,1478857242.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:42.896Z,1478857242.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:42.911Z,1478857242.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:43.295Z,1478857243.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:43.314Z,1478857243.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:43.697Z,1478857243.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:43.717Z,1478857243.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:44.089Z,1478857244.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:44.123Z,1478857244.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:44.489Z,1478857244.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:44.521Z,1478857244.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:44.889Z,1478857244.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:44.923Z,1478857244.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:45.297Z,1478857245.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:45.312Z,1478857245.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:45.695Z,1478857245.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:45.710Z,1478857245.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:46.101Z,1478857246.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:46.124Z,1478857246.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:46.489Z,1478857246.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:46.521Z,1478857246.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:46.889Z,1478857246.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:46.921Z,1478857246.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:47.297Z,1478857247.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:47.322Z,1478857247.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:47.693Z,1478857247.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:47.725Z,1478857247.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:48.089Z,1478857248.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:48.116Z,1478857248.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:48.348Z,1478857248.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:48.489Z,1478857248.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:48.504Z,1478857248.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:48.896Z,1478857248.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:48.931Z,1478857248.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:49.144Z,1478857249.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:49.293Z,1478857249.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:49.308Z,1478857249.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:49.689Z,1478857249.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:49.709Z,1478857249.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:50.095Z,1478857250.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:50.153Z,1478857250.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:50.495Z,1478857250.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:50.511Z,1478857250.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:50.901Z,1478857250.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:50.921Z,1478857250.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:51.296Z,1478857251.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:51.311Z,1478857251.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:51.696Z,1478857251.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:51.759Z,1478857251.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:52.093Z,1478857252.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:52.125Z,1478857252.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:52.489Z,1478857252.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:52.538Z,1478857252.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:52.889Z,1478857252.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:52.921Z,1478857252.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:53.297Z,1478857253.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:53.345Z,1478857253.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:53.693Z,1478857253.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:53.729Z,1478857253.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:54.089Z,1478857254.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:54.141Z,1478857254.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:54.489Z,1478857254.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:54.509Z,1478857254.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:54.889Z,1478857254.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:54.909Z,1478857254.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:55.289Z,1478857255.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:55.325Z,1478857255.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:55.689Z,1478857255.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:55.709Z,1478857255.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:56.089Z,1478857256.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:56.104Z,1478857256.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:56.492Z,1478857256.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:56.508Z,1478857256.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:56.893Z,1478857256.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:56.908Z,1478857256.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:57.289Z,1478857257.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:57.325Z,1478857257.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:57.689Z,1478857257.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:57.712Z,1478857257.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:58.093Z,1478857258.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:58.130Z,1478857258.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:58.489Z,1478857258.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:58.533Z,1478857258.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:58.889Z,1478857258.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:58.904Z,1478857258.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:59.289Z,1478857259.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:59.309Z,1478857259.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:40:59.692Z,1478857259.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:40:59.713Z,1478857259.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:00.096Z,1478857260.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:00.112Z,1478857260.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:00.495Z,1478857260.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:00.514Z,1478857260.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:00.896Z,1478857260.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:00.911Z,1478857260.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:01.289Z,1478857261.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:01.313Z,1478857261.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:01.695Z,1478857261.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:01.711Z,1478857261.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:02.097Z,1478857262.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:02.117Z,1478857262.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:02.328Z,1478857262.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:02.504Z,1478857262.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:02.520Z,1478857262.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:02.889Z,1478857262.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:02.922Z,1478857262.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:03.124Z,1478857263.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:03.289Z,1478857263.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:03.315Z,1478857263.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:03.689Z,1478857263.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:03.715Z,1478857263.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:04.100Z,1478857264.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:04.122Z,1478857264.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:04.489Z,1478857264.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:04.523Z,1478857264.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:04.889Z,1478857264.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:04.922Z,1478857264.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:05.293Z,1478857265.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:05.345Z,1478857265.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:05.689Z,1478857265.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:05.725Z,1478857265.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:06.093Z,1478857266.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:06.157Z,1478857266.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:06.499Z,1478857266.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:06.534Z,1478857266.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:09.900Z,1478857269.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:09.950Z,1478857269.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:10.049Z,1478857270.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:10.089Z,1478857270.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:10.437Z,1478857270.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:10.478Z,1478857270.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:10.837Z,1478857270.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:10.878Z,1478857270.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:11.245Z,1478857271.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:11.261Z,1478857271.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:11.639Z,1478857271.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:11.684Z,1478857271.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:12.045Z,1478857272.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:12.065Z,1478857272.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:12.444Z,1478857272.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:12.460Z,1478857272.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:12.845Z,1478857272.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:12.865Z,1478857272.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:13.237Z,1478857273.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:13.271Z,1478857273.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:13.637Z,1478857273.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:13.669Z,1478857273.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:14.037Z,1478857274.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:14.069Z,1478857274.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:14.437Z,1478857274.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:14.471Z,1478857274.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:14.837Z,1478857274.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:14.869Z,1478857274.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:15.245Z,1478857275.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:15.271Z,1478857275.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:15.637Z,1478857275.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:15.669Z,1478857275.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:16.037Z,1478857276.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:16.060Z,1478857276.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:16.437Z,1478857276.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:16.473Z,1478857276.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:16.837Z,1478857276.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:16.864Z,1478857276.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:17.241Z,1478857277.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:17.257Z,1478857277.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:17.637Z,1478857277.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:17.657Z,1478857277.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:18.042Z,1478857278.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:18.073Z,1478857278.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:18.437Z,1478857278.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:18.473Z,1478857278.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:18.837Z,1478857278.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:18.873Z,1478857278.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:19.242Z,1478857279.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:19.269Z,1478857279.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:19.643Z,1478857279.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:19.663Z,1478857279.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:20.045Z,1478857280.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:20.067Z,1478857280.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:20.437Z,1478857280.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:20.471Z,1478857280.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:20.837Z,1478857280.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:20.872Z,1478857280.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:21.245Z,1478857281.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:21.281Z,1478857281.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:21.645Z,1478857281.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:21.694Z,1478857281.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:22.037Z,1478857282.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:22.093Z,1478857282.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:22.445Z,1478857282.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:22.460Z,1478857282.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:22.841Z,1478857282.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:22.863Z,1478857282.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:23.244Z,1478857283.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:23.268Z,1478857283.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:23.651Z,1478857283.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:23.677Z,1478857283.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:24.044Z,1478857284.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:24.071Z,1478857284.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:24.437Z,1478857284.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:24.469Z,1478857284.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:24.837Z,1478857284.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:24.869Z,1478857284.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:25.237Z,1478857285.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:25.265Z,1478857285.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:25.644Z,1478857285.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:25.660Z,1478857285.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:26.048Z,1478857286.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:26.056Z,1478857286.056 [BPC1](ERROR): Failed to receive battery data
2016-11-11T09:41:26.057Z,1478857286.057 [BPC1] Communications Fault, FailCount= 1
2016-11-11T09:41:26.057Z,1478857286.057 [BPC1](ERROR): Communications Fault
2016-11-11T09:41:26.065Z,1478857286.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:26.070Z,1478857286.070 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:26.071Z,1478857286.071 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 78
2016-11-11T09:41:26.071Z,1478857286.071 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:41:26.073Z,1478857286.073 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:26.073Z,1478857286.073 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 78
2016-11-11T09:41:26.073Z,1478857286.073 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:41:26.087Z,1478857286.087 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:41:26.119Z,1478857286.119 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:41:26.120Z,1478857286.120 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T09:41:26.437Z,1478857286.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:26.469Z,1478857286.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:26.469Z,1478857286.469 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78
2016-11-11T09:41:26.469Z,1478857286.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:41:26.487Z,1478857286.487 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:41:26.487Z,1478857286.487 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:41:26.487Z,1478857286.487 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 78
2016-11-11T09:41:26.488Z,1478857286.488 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:41:26.488Z,1478857286.488 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 78
2016-11-11T09:41:26.845Z,1478857286.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:26.884Z,1478857286.884 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:41:26.885Z,1478857286.885 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:41:26.885Z,1478857286.885 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:41:26.886Z,1478857286.886 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:41:26.886Z,1478857286.886 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:41:26.886Z,1478857286.886 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:41:26.944Z,1478857286.944 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:41:26.944Z,1478857286.944 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78
2016-11-11T09:41:27.249Z,1478857287.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:27.282Z,1478857287.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:41:27.282Z,1478857287.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:41:27.282Z,1478857287.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:41:27.306Z,1478857287.306 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:41:27.307Z,1478857287.307 [BPC1] No Fault, FailCount= 1
2016-11-11T09:41:27.648Z,1478857287.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:27.731Z,1478857287.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:28.041Z,1478857288.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:28.091Z,1478857288.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:28.445Z,1478857288.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:28.465Z,1478857288.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:28.843Z,1478857288.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:28.865Z,1478857288.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:29.249Z,1478857289.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:29.264Z,1478857289.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:29.654Z,1478857289.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:29.692Z,1478857289.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:30.045Z,1478857290.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:30.061Z,1478857290.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:30.440Z,1478857290.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:30.472Z,1478857290.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:30.845Z,1478857290.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:30.877Z,1478857290.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:31.241Z,1478857291.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:31.266Z,1478857291.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:31.637Z,1478857291.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:31.669Z,1478857291.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:32.037Z,1478857292.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:32.069Z,1478857292.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:32.437Z,1478857292.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:32.469Z,1478857292.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:32.837Z,1478857292.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:32.869Z,1478857292.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:33.241Z,1478857293.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:33.312Z,1478857293.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:33.637Z,1478857293.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:33.652Z,1478857293.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:34.045Z,1478857294.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:34.065Z,1478857294.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:34.445Z,1478857294.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:34.506Z,1478857294.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:34.844Z,1478857294.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:34.862Z,1478857294.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:35.237Z,1478857295.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:35.288Z,1478857295.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:35.637Z,1478857295.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:35.689Z,1478857295.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:36.037Z,1478857296.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:36.080Z,1478857296.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:36.437Z,1478857296.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:36.473Z,1478857296.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:36.837Z,1478857296.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:36.857Z,1478857296.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:37.237Z,1478857297.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:37.271Z,1478857297.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:37.637Z,1478857297.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:37.669Z,1478857297.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:38.037Z,1478857298.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:38.069Z,1478857298.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:38.455Z,1478857298.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:38.485Z,1478857298.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:38.837Z,1478857298.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:38.860Z,1478857298.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:39.249Z,1478857299.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:39.269Z,1478857299.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:39.644Z,1478857299.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:39.659Z,1478857299.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:40.044Z,1478857300.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:40.071Z,1478857300.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:40.444Z,1478857300.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:40.468Z,1478857300.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:40.837Z,1478857300.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:40.872Z,1478857300.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:41.237Z,1478857301.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:41.279Z,1478857301.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:41.637Z,1478857301.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:41.657Z,1478857301.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:42.037Z,1478857302.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:42.057Z,1478857302.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:42.441Z,1478857302.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:42.463Z,1478857302.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:42.841Z,1478857302.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:42.861Z,1478857302.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:43.243Z,1478857303.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:43.262Z,1478857303.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:43.646Z,1478857303.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:43.661Z,1478857303.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:44.041Z,1478857304.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:44.073Z,1478857304.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:44.449Z,1478857304.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:44.464Z,1478857304.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:44.838Z,1478857304.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:44.880Z,1478857304.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:45.237Z,1478857305.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:45.274Z,1478857305.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:45.637Z,1478857305.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:45.674Z,1478857305.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:46.042Z,1478857306.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:46.080Z,1478857306.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:46.437Z,1478857306.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:46.489Z,1478857306.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:46.841Z,1478857306.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:46.884Z,1478857306.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:47.241Z,1478857307.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:47.257Z,1478857307.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:47.642Z,1478857307.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:47.682Z,1478857307.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:48.049Z,1478857308.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:48.095Z,1478857308.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:48.443Z,1478857308.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:48.459Z,1478857308.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:48.844Z,1478857308.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:48.937Z,1478857308.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:49.249Z,1478857309.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:49.274Z,1478857309.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:49.637Z,1478857309.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:49.706Z,1478857309.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:50.037Z,1478857310.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:50.085Z,1478857310.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:50.437Z,1478857310.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:50.470Z,1478857310.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:50.837Z,1478857310.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:50.876Z,1478857310.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:51.237Z,1478857311.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:51.266Z,1478857311.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:51.637Z,1478857311.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:51.662Z,1478857311.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:52.037Z,1478857312.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:52.064Z,1478857312.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:52.437Z,1478857312.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:52.474Z,1478857312.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:52.838Z,1478857312.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:52.867Z,1478857312.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:53.237Z,1478857313.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:53.273Z,1478857313.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:53.637Z,1478857313.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:53.677Z,1478857313.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:54.037Z,1478857314.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:54.077Z,1478857314.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:54.437Z,1478857314.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:54.467Z,1478857314.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:54.849Z,1478857314.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:54.937Z,1478857314.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:55.237Z,1478857315.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:55.257Z,1478857315.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:55.643Z,1478857315.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:55.662Z,1478857315.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:56.045Z,1478857316.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:56.062Z,1478857316.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:56.453Z,1478857316.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:56.504Z,1478857316.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:56.845Z,1478857316.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:56.861Z,1478857316.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:57.249Z,1478857317.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:57.268Z,1478857317.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:57.646Z,1478857317.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:57.663Z,1478857317.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:58.048Z,1478857318.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:58.081Z,1478857318.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:58.445Z,1478857318.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:58.469Z,1478857318.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:58.837Z,1478857318.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:58.874Z,1478857318.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:59.237Z,1478857319.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:59.275Z,1478857319.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:41:59.637Z,1478857319.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:41:59.668Z,1478857319.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:00.040Z,1478857320.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:00.071Z,1478857320.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:00.443Z,1478857320.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:00.467Z,1478857320.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:00.847Z,1478857320.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:00.881Z,1478857320.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:01.244Z,1478857321.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:01.279Z,1478857321.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:01.637Z,1478857321.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:01.665Z,1478857321.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:02.045Z,1478857322.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:02.106Z,1478857322.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:02.437Z,1478857322.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:02.473Z,1478857322.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:02.837Z,1478857322.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:02.917Z,1478857322.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:03.237Z,1478857323.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:03.289Z,1478857323.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:03.637Z,1478857323.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:03.676Z,1478857323.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:04.039Z,1478857324.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:04.093Z,1478857324.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:04.437Z,1478857324.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:04.501Z,1478857324.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:04.837Z,1478857324.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:04.905Z,1478857324.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:05.250Z,1478857325.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:05.266Z,1478857325.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:05.647Z,1478857325.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:05.669Z,1478857325.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:05.678Z,1478857325.678 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T09:42:05.678Z,1478857325.678 [Default:CheckIn:C.Wait] Stopped
2016-11-11T09:42:05.678Z,1478857325.678 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T09:42:05.678Z,1478857325.678 [Default:CheckIn:D] Running Loop=1
2016-11-11T09:42:06.045Z,1478857326.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:06.077Z,1478857326.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:06.086Z,1478857326.086 [Default:CheckIn:D] Stopped
2016-11-11T09:42:06.086Z,1478857326.086 [Default:CheckIn:E] Running Loop=1
2016-11-11T09:42:06.437Z,1478857326.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:06.474Z,1478857326.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:06.492Z,1478857326.492 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 292.079590 min 
2016-11-11T09:42:06.492Z,1478857326.492 [Default:CheckIn:E] Stopped
2016-11-11T09:42:06.492Z,1478857326.492 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T09:42:06.492Z,1478857326.492 [Default:CheckIn] Stopped
2016-11-11T09:42:06.492Z,1478857326.492 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T09:42:06.493Z,1478857326.493 [Default:CheckIn](INFO): Running loop #29
2016-11-11T09:42:06.493Z,1478857326.493 [Default:CheckIn] Running Loop=29
2016-11-11T09:42:06.493Z,1478857326.493 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T09:42:06.493Z,1478857326.493 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T09:42:06.839Z,1478857326.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:06.916Z,1478857326.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:10.333Z,1478857330.333 [NAL9602](INFO): Powering up
2016-11-11T09:42:10.350Z,1478857330.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:10.398Z,1478857330.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:10.493Z,1478857330.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:10.517Z,1478857330.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:10.881Z,1478857330.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:10.897Z,1478857330.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:11.273Z,1478857331.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:11.299Z,1478857331.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:11.677Z,1478857331.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:11.703Z,1478857331.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:12.069Z,1478857332.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:12.101Z,1478857332.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:12.474Z,1478857332.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:12.513Z,1478857332.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:12.869Z,1478857332.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:12.901Z,1478857332.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:13.273Z,1478857333.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:13.305Z,1478857333.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:13.680Z,1478857333.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:13.708Z,1478857333.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:14.076Z,1478857334.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:14.097Z,1478857334.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:14.476Z,1478857334.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:14.492Z,1478857334.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:14.877Z,1478857334.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:14.893Z,1478857334.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:15.276Z,1478857335.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:15.385Z,1478857335.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:15.669Z,1478857335.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:15.689Z,1478857335.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:16.072Z,1478857336.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:16.088Z,1478857336.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:16.476Z,1478857336.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:16.533Z,1478857336.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:16.895Z,1478857336.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:16.943Z,1478857336.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:17.274Z,1478857337.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:17.290Z,1478857337.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:17.674Z,1478857337.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:17.720Z,1478857337.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:18.076Z,1478857338.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:18.092Z,1478857338.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:18.476Z,1478857338.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:18.523Z,1478857338.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:18.893Z,1478857338.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:18.965Z,1478857338.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:19.277Z,1478857339.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:19.297Z,1478857339.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:19.675Z,1478857339.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:19.697Z,1478857339.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:20.076Z,1478857340.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:20.092Z,1478857340.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:20.479Z,1478857340.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:20.495Z,1478857340.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:20.892Z,1478857340.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:20.934Z,1478857340.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:21.253Z,1478857341.253 [NAL9602](INFO): NAL9602 initialized
2016-11-11T09:42:21.277Z,1478857341.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:21.299Z,1478857341.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:21.670Z,1478857341.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:21.705Z,1478857341.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:22.084Z,1478857342.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:22.107Z,1478857342.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:22.490Z,1478857342.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:22.522Z,1478857342.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:22.908Z,1478857342.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:22.956Z,1478857342.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:23.269Z,1478857343.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:23.309Z,1478857343.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:23.674Z,1478857343.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:23.690Z,1478857343.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:24.083Z,1478857344.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:24.114Z,1478857344.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:24.473Z,1478857344.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:24.493Z,1478857344.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:24.873Z,1478857344.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:24.893Z,1478857344.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:25.282Z,1478857345.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:25.305Z,1478857345.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:25.681Z,1478857345.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:25.701Z,1478857345.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:26.073Z,1478857346.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:26.109Z,1478857346.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:26.470Z,1478857346.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:26.498Z,1478857346.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:26.870Z,1478857346.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:26.906Z,1478857346.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:27.270Z,1478857347.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:27.349Z,1478857347.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:27.673Z,1478857347.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:27.689Z,1478857347.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:28.081Z,1478857348.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:28.105Z,1478857348.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:28.474Z,1478857348.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:28.510Z,1478857348.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:28.870Z,1478857348.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:28.918Z,1478857348.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:29.269Z,1478857349.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:29.286Z,1478857349.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:29.677Z,1478857349.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:29.725Z,1478857349.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:30.072Z,1478857350.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:30.098Z,1478857350.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:30.476Z,1478857350.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:30.492Z,1478857350.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:30.910Z,1478857350.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:30.985Z,1478857350.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:31.277Z,1478857351.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:31.297Z,1478857351.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:31.677Z,1478857351.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:31.706Z,1478857351.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:32.069Z,1478857352.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:32.114Z,1478857352.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:32.474Z,1478857352.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:32.500Z,1478857352.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:32.906Z,1478857352.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:32.973Z,1478857352.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:33.269Z,1478857353.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:33.313Z,1478857353.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:33.669Z,1478857353.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:33.723Z,1478857353.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:34.069Z,1478857354.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:34.085Z,1478857354.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:34.470Z,1478857354.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:34.493Z,1478857354.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:34.882Z,1478857354.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:34.920Z,1478857354.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:35.277Z,1478857355.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:35.297Z,1478857355.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:35.677Z,1478857355.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:35.692Z,1478857355.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:36.076Z,1478857356.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:36.091Z,1478857356.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:36.472Z,1478857356.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:36.502Z,1478857356.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:36.891Z,1478857356.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:36.938Z,1478857356.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:37.280Z,1478857357.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:37.305Z,1478857357.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:37.669Z,1478857357.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:37.701Z,1478857357.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:38.069Z,1478857358.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:38.101Z,1478857358.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:38.469Z,1478857358.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:38.504Z,1478857358.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:38.869Z,1478857358.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:38.904Z,1478857358.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:39.269Z,1478857359.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:39.296Z,1478857359.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:39.669Z,1478857359.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:39.713Z,1478857359.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:40.070Z,1478857360.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:40.113Z,1478857360.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:40.469Z,1478857360.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:40.505Z,1478857360.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:40.873Z,1478857360.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:40.888Z,1478857360.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:41.315Z,1478857361.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:41.361Z,1478857361.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:41.670Z,1478857361.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:41.693Z,1478857361.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:42.073Z,1478857362.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:42.093Z,1478857362.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:42.473Z,1478857362.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:42.492Z,1478857362.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:42.876Z,1478857362.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:42.892Z,1478857362.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:43.286Z,1478857363.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:43.355Z,1478857363.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:43.678Z,1478857363.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:43.710Z,1478857363.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:44.072Z,1478857364.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:44.162Z,1478857364.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:44.471Z,1478857364.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:44.517Z,1478857364.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:44.875Z,1478857364.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:44.915Z,1478857364.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:45.272Z,1478857365.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:45.361Z,1478857365.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:45.678Z,1478857365.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:45.745Z,1478857365.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:46.075Z,1478857366.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:46.115Z,1478857366.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:46.480Z,1478857366.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:46.546Z,1478857366.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:46.874Z,1478857366.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:46.952Z,1478857366.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:47.280Z,1478857367.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:47.342Z,1478857367.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:47.675Z,1478857367.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:47.734Z,1478857367.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:48.079Z,1478857368.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:48.127Z,1478857368.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:48.471Z,1478857368.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:48.501Z,1478857368.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:48.873Z,1478857368.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:48.915Z,1478857368.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:49.274Z,1478857369.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:49.322Z,1478857369.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:49.670Z,1478857369.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:49.702Z,1478857369.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:50.077Z,1478857370.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:50.139Z,1478857370.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:50.474Z,1478857370.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:50.513Z,1478857370.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:50.872Z,1478857370.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:50.920Z,1478857370.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:51.270Z,1478857371.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:51.302Z,1478857371.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:51.685Z,1478857371.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:51.733Z,1478857371.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:52.085Z,1478857372.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:52.105Z,1478857372.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:52.476Z,1478857372.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:52.492Z,1478857372.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:52.869Z,1478857372.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:52.979Z,1478857372.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:53.253Z,1478857373.253 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-11T09:42:53.331Z,1478857373.331 [NAL9602](FAULT): received: 
+CSQ:0

OK1, 2, 0, 0, 0

OK
2016-11-11T09:42:53.331Z,1478857373.331 [NAL9602] Data Fault, FailCount= 1
2016-11-11T09:42:53.331Z,1478857373.331 [NAL9602](ERROR): Data Fault
2016-11-11T09:42:53.349Z,1478857373.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:53.369Z,1478857373.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:53.450Z,1478857373.450 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T09:42:53.652Z,1478857373.652 [NAL9602](INFO): Powering down
2016-11-11T09:42:53.670Z,1478857373.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:53.722Z,1478857373.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:54.069Z,1478857374.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:54.112Z,1478857374.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:54.478Z,1478857374.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:54.525Z,1478857374.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:54.557Z,1478857374.557 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T09:42:54.557Z,1478857374.557 [NAL9602] No Fault, FailCount= 1
2016-11-11T09:42:54.875Z,1478857374.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:54.894Z,1478857374.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:55.334Z,1478857375.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:55.387Z,1478857375.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:55.676Z,1478857375.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:55.697Z,1478857375.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:56.098Z,1478857376.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:56.141Z,1478857376.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:56.496Z,1478857376.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:56.557Z,1478857376.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:56.875Z,1478857376.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:56.940Z,1478857376.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:57.322Z,1478857377.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:57.354Z,1478857377.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:57.671Z,1478857377.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:57.709Z,1478857377.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:58.071Z,1478857378.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:58.110Z,1478857378.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:58.472Z,1478857378.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:58.513Z,1478857378.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:58.861Z,1478857378.861 [NAL9602](INFO): Powering up NAL9602
2016-11-11T09:42:58.880Z,1478857378.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:58.965Z,1478857378.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:59.279Z,1478857379.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:59.312Z,1478857379.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:42:59.671Z,1478857379.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:42:59.765Z,1478857379.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:00.078Z,1478857380.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:00.126Z,1478857380.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:00.476Z,1478857380.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:00.529Z,1478857380.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:00.870Z,1478857380.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:00.910Z,1478857380.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:01.270Z,1478857381.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:01.326Z,1478857381.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:01.679Z,1478857381.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:01.740Z,1478857381.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:02.077Z,1478857382.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:02.106Z,1478857382.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:02.469Z,1478857382.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:02.517Z,1478857382.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:02.886Z,1478857382.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:02.918Z,1478857382.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:03.275Z,1478857383.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:03.323Z,1478857383.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:03.679Z,1478857383.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:03.732Z,1478857383.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:04.083Z,1478857384.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:04.122Z,1478857384.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:04.478Z,1478857384.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:04.502Z,1478857384.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:04.880Z,1478857384.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:04.930Z,1478857384.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:05.280Z,1478857385.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:05.308Z,1478857385.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:05.671Z,1478857385.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:05.710Z,1478857385.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:06.071Z,1478857386.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:06.121Z,1478857386.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:06.472Z,1478857386.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:06.516Z,1478857386.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:06.874Z,1478857386.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:06.954Z,1478857386.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:10.288Z,1478857390.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:10.309Z,1478857390.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:10.433Z,1478857390.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:10.454Z,1478857390.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:10.793Z,1478857390.793 [NAL9602](INFO): NAL9602 initialized
2016-11-11T09:43:10.810Z,1478857390.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:10.829Z,1478857390.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:11.211Z,1478857391.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:11.265Z,1478857391.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:11.627Z,1478857391.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:11.645Z,1478857391.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:12.022Z,1478857392.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:12.077Z,1478857392.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:12.416Z,1478857392.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:12.453Z,1478857392.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:12.834Z,1478857392.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:12.866Z,1478857392.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:13.210Z,1478857393.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:13.230Z,1478857393.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:13.613Z,1478857393.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:13.628Z,1478857393.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:14.023Z,1478857394.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:14.062Z,1478857394.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:14.428Z,1478857394.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:14.485Z,1478857394.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:14.844Z,1478857394.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:14.900Z,1478857394.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:15.206Z,1478857395.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:15.221Z,1478857395.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:15.605Z,1478857395.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:15.658Z,1478857395.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:16.009Z,1478857396.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:16.029Z,1478857396.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:16.409Z,1478857396.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:16.476Z,1478857396.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:16.815Z,1478857396.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:16.872Z,1478857396.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:17.212Z,1478857397.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:17.288Z,1478857397.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:17.614Z,1478857397.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:17.629Z,1478857397.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:18.005Z,1478857398.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:18.047Z,1478857398.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:18.405Z,1478857398.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:18.450Z,1478857398.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:18.860Z,1478857398.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:18.904Z,1478857398.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:19.239Z,1478857399.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:19.255Z,1478857399.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:19.619Z,1478857399.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:19.657Z,1478857399.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:20.020Z,1478857400.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:20.058Z,1478857400.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:20.408Z,1478857400.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:20.440Z,1478857400.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:20.812Z,1478857400.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:20.828Z,1478857400.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:21.205Z,1478857401.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:21.247Z,1478857401.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:21.605Z,1478857401.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:21.650Z,1478857401.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:22.005Z,1478857402.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:22.025Z,1478857402.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:22.136Z,1478857402.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:22.405Z,1478857402.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:22.425Z,1478857402.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:22.810Z,1478857402.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:22.830Z,1478857402.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:22.932Z,1478857402.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:23.223Z,1478857403.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:23.285Z,1478857403.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:23.614Z,1478857403.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:23.654Z,1478857403.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:24.020Z,1478857404.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:24.062Z,1478857404.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:24.416Z,1478857404.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:24.454Z,1478857404.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:24.820Z,1478857404.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:24.857Z,1478857404.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:25.263Z,1478857405.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:25.297Z,1478857405.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:25.605Z,1478857405.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:25.639Z,1478857405.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:26.010Z,1478857406.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:26.039Z,1478857406.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:26.409Z,1478857406.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:26.437Z,1478857406.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:26.809Z,1478857406.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:26.854Z,1478857406.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:27.206Z,1478857407.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:27.245Z,1478857407.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:27.605Z,1478857407.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:27.645Z,1478857407.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:28.005Z,1478857408.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:28.069Z,1478857408.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:28.414Z,1478857408.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:28.430Z,1478857408.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:28.815Z,1478857408.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:28.869Z,1478857408.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:29.220Z,1478857409.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:29.281Z,1478857409.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:29.623Z,1478857409.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:29.650Z,1478857409.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:30.030Z,1478857410.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:30.097Z,1478857410.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:30.416Z,1478857410.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:30.485Z,1478857410.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:30.812Z,1478857410.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:30.859Z,1478857410.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:31.209Z,1478857411.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:31.258Z,1478857411.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:31.605Z,1478857411.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:31.665Z,1478857411.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:32.006Z,1478857412.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:32.021Z,1478857412.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:32.405Z,1478857412.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:32.425Z,1478857412.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:32.811Z,1478857412.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:32.852Z,1478857412.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:33.213Z,1478857413.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:33.247Z,1478857413.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:33.605Z,1478857413.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:33.669Z,1478857413.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:34.005Z,1478857414.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:34.030Z,1478857414.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:34.420Z,1478857414.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:34.465Z,1478857414.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:34.816Z,1478857414.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:34.891Z,1478857414.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:35.228Z,1478857415.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:35.297Z,1478857415.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:35.640Z,1478857415.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:35.662Z,1478857415.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:36.006Z,1478857416.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:36.041Z,1478857416.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:36.136Z,1478857416.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:36.412Z,1478857416.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:36.447Z,1478857416.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:36.814Z,1478857416.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:36.829Z,1478857416.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:36.932Z,1478857416.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:37.256Z,1478857417.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:37.308Z,1478857417.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:37.614Z,1478857417.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:37.635Z,1478857417.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:38.014Z,1478857418.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:38.030Z,1478857418.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:38.410Z,1478857418.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:38.445Z,1478857418.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:38.813Z,1478857418.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:38.829Z,1478857418.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:39.227Z,1478857419.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:39.278Z,1478857419.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:39.620Z,1478857419.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:39.657Z,1478857419.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:40.016Z,1478857420.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:40.045Z,1478857420.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:40.424Z,1478857420.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:40.458Z,1478857420.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:40.816Z,1478857420.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:40.852Z,1478857420.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:41.217Z,1478857421.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:41.236Z,1478857421.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:41.612Z,1478857421.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:41.637Z,1478857421.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:42.016Z,1478857422.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:42.040Z,1478857422.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:42.405Z,1478857422.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:42.458Z,1478857422.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:42.809Z,1478857422.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:42.852Z,1478857422.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:43.206Z,1478857423.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:43.262Z,1478857423.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:43.605Z,1478857423.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:43.650Z,1478857423.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:44.006Z,1478857424.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:44.022Z,1478857424.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:44.405Z,1478857424.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:44.454Z,1478857424.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:44.831Z,1478857424.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:44.848Z,1478857424.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:45.220Z,1478857425.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:45.262Z,1478857425.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:45.620Z,1478857425.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:45.651Z,1478857425.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:46.020Z,1478857426.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:46.077Z,1478857426.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:46.413Z,1478857426.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:46.428Z,1478857426.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:46.813Z,1478857426.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:46.828Z,1478857426.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:47.213Z,1478857427.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:47.238Z,1478857427.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:47.614Z,1478857427.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:47.645Z,1478857427.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:48.006Z,1478857428.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:48.053Z,1478857428.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:48.405Z,1478857428.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:48.443Z,1478857428.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:48.814Z,1478857428.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:48.881Z,1478857428.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:49.208Z,1478857429.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:49.247Z,1478857429.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:49.612Z,1478857429.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:49.644Z,1478857429.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:50.023Z,1478857430.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:50.085Z,1478857430.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:50.423Z,1478857430.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:50.439Z,1478857430.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:50.826Z,1478857430.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:50.876Z,1478857430.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:51.249Z,1478857431.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:51.281Z,1478857431.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:51.605Z,1478857431.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:51.693Z,1478857431.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:52.005Z,1478857432.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:52.056Z,1478857432.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:52.405Z,1478857432.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:52.445Z,1478857432.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:52.805Z,1478857432.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:52.825Z,1478857432.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:53.217Z,1478857433.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:53.273Z,1478857433.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:53.613Z,1478857433.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:53.628Z,1478857433.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:54.013Z,1478857434.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:54.036Z,1478857434.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:54.412Z,1478857434.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:54.427Z,1478857434.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:54.820Z,1478857434.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:54.838Z,1478857434.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:55.222Z,1478857435.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:55.248Z,1478857435.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:55.620Z,1478857435.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:55.651Z,1478857435.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:56.028Z,1478857436.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:56.046Z,1478857436.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:56.427Z,1478857436.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:56.445Z,1478857436.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:56.805Z,1478857436.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:56.839Z,1478857436.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:57.205Z,1478857437.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:57.248Z,1478857437.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:57.605Z,1478857437.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:57.645Z,1478857437.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:58.005Z,1478857438.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:58.061Z,1478857438.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:58.412Z,1478857438.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:58.428Z,1478857438.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:58.821Z,1478857438.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:58.869Z,1478857438.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:59.213Z,1478857439.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:59.259Z,1478857439.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:43:59.609Z,1478857439.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:43:59.661Z,1478857439.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:00.014Z,1478857440.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:00.062Z,1478857440.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:00.423Z,1478857440.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:00.457Z,1478857440.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:00.830Z,1478857440.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:00.860Z,1478857440.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:01.222Z,1478857441.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:01.248Z,1478857441.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:01.626Z,1478857441.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:01.643Z,1478857441.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:02.006Z,1478857442.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:02.122Z,1478857442.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:02.409Z,1478857442.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:02.448Z,1478857442.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:02.870Z,1478857442.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:02.934Z,1478857442.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:03.205Z,1478857443.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:03.221Z,1478857443.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:03.613Z,1478857443.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:03.636Z,1478857443.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:04.011Z,1478857444.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:04.037Z,1478857444.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:04.413Z,1478857444.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:04.428Z,1478857444.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:04.815Z,1478857444.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:04.831Z,1478857444.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:05.223Z,1478857445.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:05.276Z,1478857445.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:05.623Z,1478857445.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:05.640Z,1478857445.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:06.026Z,1478857446.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:06.052Z,1478857446.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:06.427Z,1478857446.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:06.453Z,1478857446.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:06.828Z,1478857446.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:06.889Z,1478857446.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:07.216Z,1478857447.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:07.248Z,1478857447.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:10.713Z,1478857450.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:10.758Z,1478857450.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:10.885Z,1478857450.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:10.913Z,1478857450.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:11.276Z,1478857451.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:11.309Z,1478857451.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:11.688Z,1478857451.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:11.703Z,1478857451.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:12.061Z,1478857452.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:12.133Z,1478857452.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:12.469Z,1478857452.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:12.506Z,1478857452.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:12.870Z,1478857452.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:12.902Z,1478857452.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:13.269Z,1478857453.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:13.325Z,1478857453.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:13.669Z,1478857453.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:13.689Z,1478857453.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:14.070Z,1478857454.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:14.122Z,1478857454.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:14.473Z,1478857454.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:14.528Z,1478857454.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:14.864Z,1478857454.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:14.895Z,1478857454.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:15.270Z,1478857455.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:15.285Z,1478857455.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:15.683Z,1478857455.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:15.698Z,1478857455.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:16.086Z,1478857456.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:16.102Z,1478857456.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:16.484Z,1478857456.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:16.505Z,1478857456.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:16.887Z,1478857456.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:16.909Z,1478857456.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:17.265Z,1478857457.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:17.297Z,1478857457.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:17.662Z,1478857457.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:17.706Z,1478857457.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:18.066Z,1478857458.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:18.093Z,1478857458.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:18.466Z,1478857458.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:18.505Z,1478857458.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:18.868Z,1478857458.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:18.884Z,1478857458.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:19.269Z,1478857459.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:19.286Z,1478857459.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:19.682Z,1478857459.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:19.701Z,1478857459.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:20.068Z,1478857460.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:20.103Z,1478857460.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:20.474Z,1478857460.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:20.493Z,1478857460.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:20.883Z,1478857460.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:20.899Z,1478857460.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:21.280Z,1478857461.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:21.301Z,1478857461.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:21.693Z,1478857461.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:21.716Z,1478857461.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:22.084Z,1478857462.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:22.100Z,1478857462.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:22.470Z,1478857462.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:22.504Z,1478857462.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:22.865Z,1478857462.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:22.894Z,1478857462.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:23.270Z,1478857463.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:23.302Z,1478857463.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:23.676Z,1478857463.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:23.721Z,1478857463.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:24.072Z,1478857464.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:24.093Z,1478857464.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:24.470Z,1478857464.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:24.503Z,1478857464.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:24.891Z,1478857464.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:24.907Z,1478857464.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:25.284Z,1478857465.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:25.304Z,1478857465.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:25.680Z,1478857465.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:25.697Z,1478857465.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:26.079Z,1478857466.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:26.141Z,1478857466.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:26.476Z,1478857466.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:26.533Z,1478857466.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:26.876Z,1478857466.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:26.904Z,1478857466.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:26.917Z,1478857466.917 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:26.917Z,1478857466.917 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 79
2016-11-11T09:44:26.917Z,1478857466.917 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:44:26.923Z,1478857466.923 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:26.924Z,1478857466.924 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 79
2016-11-11T09:44:26.924Z,1478857466.924 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:44:26.950Z,1478857466.950 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:44:26.951Z,1478857466.951 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:44:27.276Z,1478857467.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:27.319Z,1478857467.319 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:27.319Z,1478857467.319 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79
2016-11-11T09:44:27.319Z,1478857467.319 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:44:27.337Z,1478857467.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:44:27.338Z,1478857467.338 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:44:27.338Z,1478857467.338 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 79
2016-11-11T09:44:27.338Z,1478857467.338 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:44:27.338Z,1478857467.338 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 79
2016-11-11T09:44:27.664Z,1478857467.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:27.721Z,1478857467.721 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:44:27.721Z,1478857467.721 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:44:27.722Z,1478857467.722 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:44:27.722Z,1478857467.722 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:44:27.723Z,1478857467.723 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:44:27.723Z,1478857467.723 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:44:27.737Z,1478857467.737 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:44:27.737Z,1478857467.737 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79
2016-11-11T09:44:28.076Z,1478857468.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:28.090Z,1478857468.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:44:28.090Z,1478857468.090 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:44:28.091Z,1478857468.091 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:44:28.470Z,1478857468.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:28.523Z,1478857468.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:28.876Z,1478857468.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:28.934Z,1478857468.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:29.277Z,1478857469.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:29.297Z,1478857469.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:29.661Z,1478857469.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:29.694Z,1478857469.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:30.061Z,1478857470.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:30.094Z,1478857470.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:30.469Z,1478857470.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:30.506Z,1478857470.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:30.862Z,1478857470.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:30.889Z,1478857470.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:31.276Z,1478857471.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:31.299Z,1478857471.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:31.688Z,1478857471.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:31.708Z,1478857471.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:32.075Z,1478857472.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:32.101Z,1478857472.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:32.476Z,1478857472.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:32.501Z,1478857472.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:32.873Z,1478857472.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:32.901Z,1478857472.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:33.273Z,1478857473.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:33.311Z,1478857473.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:33.664Z,1478857473.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:33.685Z,1478857473.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:34.069Z,1478857474.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:34.089Z,1478857474.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:34.469Z,1478857474.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:34.489Z,1478857474.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:34.864Z,1478857474.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:34.888Z,1478857474.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:35.276Z,1478857475.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:35.291Z,1478857475.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:35.664Z,1478857475.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:35.701Z,1478857475.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:36.061Z,1478857476.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:36.093Z,1478857476.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:36.487Z,1478857476.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:36.507Z,1478857476.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:36.915Z,1478857476.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:36.937Z,1478857476.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:37.278Z,1478857477.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:37.294Z,1478857477.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:37.683Z,1478857477.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:37.699Z,1478857477.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:38.065Z,1478857478.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:38.097Z,1478857478.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:38.465Z,1478857478.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:38.498Z,1478857478.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:38.861Z,1478857478.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:38.887Z,1478857478.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:39.261Z,1478857479.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:39.293Z,1478857479.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:39.667Z,1478857479.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:39.699Z,1478857479.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:40.068Z,1478857480.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:40.101Z,1478857480.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:40.488Z,1478857480.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:40.517Z,1478857480.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:40.861Z,1478857480.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:40.917Z,1478857480.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:41.270Z,1478857481.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:41.321Z,1478857481.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:41.683Z,1478857481.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:41.701Z,1478857481.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:42.086Z,1478857482.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:42.129Z,1478857482.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:42.486Z,1478857482.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:42.536Z,1478857482.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:42.881Z,1478857482.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:42.896Z,1478857482.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:43.259Z,1478857483.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:43.313Z,1478857483.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:43.677Z,1478857483.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:43.732Z,1478857483.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:44.062Z,1478857484.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:44.097Z,1478857484.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:44.461Z,1478857484.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:44.498Z,1478857484.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:44.869Z,1478857484.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:44.896Z,1478857484.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:45.261Z,1478857485.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:45.299Z,1478857485.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:45.661Z,1478857485.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:45.698Z,1478857485.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:46.065Z,1478857486.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:46.098Z,1478857486.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:46.461Z,1478857486.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:46.498Z,1478857486.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:46.886Z,1478857486.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:46.906Z,1478857486.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:47.284Z,1478857487.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:47.308Z,1478857487.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:47.676Z,1478857487.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:47.702Z,1478857487.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:48.072Z,1478857488.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:48.106Z,1478857488.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:48.461Z,1478857488.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:48.498Z,1478857488.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:48.865Z,1478857488.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:48.885Z,1478857488.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:49.262Z,1478857489.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:49.286Z,1478857489.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:49.672Z,1478857489.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:49.687Z,1478857489.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:50.070Z,1478857490.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:50.085Z,1478857490.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:50.464Z,1478857490.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:50.496Z,1478857490.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:50.870Z,1478857490.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:50.886Z,1478857490.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:51.276Z,1478857491.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:51.302Z,1478857491.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:51.661Z,1478857491.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:51.694Z,1478857491.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:52.088Z,1478857492.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:52.104Z,1478857492.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:52.485Z,1478857492.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:52.501Z,1478857492.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:52.885Z,1478857492.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:52.901Z,1478857492.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:53.294Z,1478857493.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:53.318Z,1478857493.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:53.688Z,1478857493.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:53.713Z,1478857493.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:54.070Z,1478857494.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:54.098Z,1478857494.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:54.464Z,1478857494.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:54.492Z,1478857494.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:54.864Z,1478857494.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:54.896Z,1478857494.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:55.269Z,1478857495.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:55.305Z,1478857495.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:55.661Z,1478857495.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:55.725Z,1478857495.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:56.062Z,1478857496.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:56.121Z,1478857496.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:56.467Z,1478857496.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:56.505Z,1478857496.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:56.883Z,1478857496.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:56.907Z,1478857496.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:57.288Z,1478857497.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:57.329Z,1478857497.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:57.677Z,1478857497.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:57.709Z,1478857497.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:58.089Z,1478857498.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:58.141Z,1478857498.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:58.484Z,1478857498.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:58.534Z,1478857498.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:58.886Z,1478857498.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:58.928Z,1478857498.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:59.272Z,1478857499.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:59.300Z,1478857499.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:44:59.670Z,1478857499.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:44:59.685Z,1478857499.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:00.063Z,1478857500.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:00.095Z,1478857500.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:00.461Z,1478857500.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:00.493Z,1478857500.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:00.862Z,1478857500.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:00.897Z,1478857500.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:01.261Z,1478857501.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:01.298Z,1478857501.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:01.661Z,1478857501.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:01.686Z,1478857501.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:02.061Z,1478857502.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:02.105Z,1478857502.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:02.488Z,1478857502.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:02.508Z,1478857502.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:02.887Z,1478857502.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:02.903Z,1478857502.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:03.275Z,1478857503.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:03.299Z,1478857503.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:03.676Z,1478857503.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:03.701Z,1478857503.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:04.064Z,1478857504.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:04.089Z,1478857504.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:04.470Z,1478857504.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:04.485Z,1478857504.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:04.868Z,1478857504.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:04.884Z,1478857504.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:05.277Z,1478857505.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:05.292Z,1478857505.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:05.662Z,1478857505.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:05.697Z,1478857505.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:06.069Z,1478857506.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:06.092Z,1478857506.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:06.461Z,1478857506.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:06.495Z,1478857506.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:06.862Z,1478857506.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:06.894Z,1478857506.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:07.262Z,1478857507.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:07.286Z,1478857507.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:10.912Z,1478857510.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:10.997Z,1478857510.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:11.092Z,1478857511.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:11.120Z,1478857511.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:11.480Z,1478857511.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:11.495Z,1478857511.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:11.880Z,1478857511.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:11.933Z,1478857511.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:12.265Z,1478857512.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:12.289Z,1478857512.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:12.665Z,1478857512.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:12.758Z,1478857512.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:13.065Z,1478857513.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:13.131Z,1478857513.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:13.461Z,1478857513.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:13.497Z,1478857513.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:13.869Z,1478857513.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:13.895Z,1478857513.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:14.262Z,1478857514.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:14.294Z,1478857514.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:14.663Z,1478857514.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:14.694Z,1478857514.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:15.076Z,1478857515.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:15.156Z,1478857515.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:15.462Z,1478857515.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:15.502Z,1478857515.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:15.877Z,1478857515.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:15.917Z,1478857515.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:16.277Z,1478857516.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:16.304Z,1478857516.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:16.682Z,1478857516.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:16.734Z,1478857516.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:17.119Z,1478857517.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:17.141Z,1478857517.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:17.469Z,1478857517.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:17.486Z,1478857517.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:17.868Z,1478857517.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:17.884Z,1478857517.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:18.264Z,1478857518.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:18.295Z,1478857518.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:18.674Z,1478857518.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:18.689Z,1478857518.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:19.069Z,1478857519.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:19.093Z,1478857519.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:19.461Z,1478857519.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:19.496Z,1478857519.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:19.861Z,1478857519.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:19.896Z,1478857519.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:20.273Z,1478857520.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:20.289Z,1478857520.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:20.684Z,1478857520.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:20.700Z,1478857520.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:21.088Z,1478857521.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:21.104Z,1478857521.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:21.484Z,1478857521.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:21.499Z,1478857521.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:21.886Z,1478857521.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:21.908Z,1478857521.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:22.272Z,1478857522.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:22.301Z,1478857522.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:22.665Z,1478857522.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:22.705Z,1478857522.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:23.066Z,1478857523.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:23.102Z,1478857523.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:23.461Z,1478857523.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:23.497Z,1478857523.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:23.865Z,1478857523.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:23.901Z,1478857523.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:24.262Z,1478857524.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:24.277Z,1478857524.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:24.683Z,1478857524.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:24.714Z,1478857524.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:25.070Z,1478857525.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:25.125Z,1478857525.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:25.464Z,1478857525.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:25.517Z,1478857525.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:25.874Z,1478857525.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:25.889Z,1478857525.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:26.284Z,1478857526.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:26.331Z,1478857526.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:26.725Z,1478857526.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:26.746Z,1478857526.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:27.088Z,1478857527.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:27.139Z,1478857527.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:27.484Z,1478857527.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:27.535Z,1478857527.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:27.861Z,1478857527.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:27.889Z,1478857527.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:28.261Z,1478857528.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:28.297Z,1478857528.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:28.665Z,1478857528.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:28.680Z,1478857528.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:29.080Z,1478857529.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:29.122Z,1478857529.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:29.468Z,1478857529.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:29.483Z,1478857529.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:29.873Z,1478857529.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:29.893Z,1478857529.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:30.267Z,1478857530.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:30.286Z,1478857530.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:30.668Z,1478857530.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:30.683Z,1478857530.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:31.079Z,1478857531.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:31.138Z,1478857531.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:31.483Z,1478857531.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:31.498Z,1478857531.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:31.878Z,1478857531.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:31.893Z,1478857531.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:32.284Z,1478857532.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:32.299Z,1478857532.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:32.679Z,1478857532.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:32.695Z,1478857532.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:33.065Z,1478857533.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:33.090Z,1478857533.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:33.470Z,1478857533.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:33.504Z,1478857533.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:33.861Z,1478857533.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:33.893Z,1478857533.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:34.265Z,1478857534.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:34.290Z,1478857534.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:34.670Z,1478857534.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:34.697Z,1478857534.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:35.066Z,1478857535.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:35.091Z,1478857535.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:35.461Z,1478857535.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:35.493Z,1478857535.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:35.866Z,1478857535.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:35.902Z,1478857535.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:36.262Z,1478857536.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:36.289Z,1478857536.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:36.701Z,1478857536.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:36.717Z,1478857536.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:37.080Z,1478857537.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:37.109Z,1478857537.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:37.476Z,1478857537.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:37.501Z,1478857537.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:37.872Z,1478857537.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:37.902Z,1478857537.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:38.269Z,1478857538.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:38.319Z,1478857538.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:38.680Z,1478857538.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:38.704Z,1478857538.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:39.073Z,1478857539.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:39.103Z,1478857539.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:39.469Z,1478857539.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:39.530Z,1478857539.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:39.862Z,1478857539.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:39.922Z,1478857539.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:40.268Z,1478857540.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:40.283Z,1478857540.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:40.691Z,1478857540.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:40.769Z,1478857540.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:41.064Z,1478857541.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:41.097Z,1478857541.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:41.468Z,1478857541.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:41.523Z,1478857541.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:41.879Z,1478857541.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:41.930Z,1478857541.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:42.272Z,1478857542.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:42.287Z,1478857542.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:42.660Z,1478857542.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:42.697Z,1478857542.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:43.064Z,1478857543.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:43.113Z,1478857543.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:43.461Z,1478857543.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:43.502Z,1478857543.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:43.876Z,1478857543.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:43.908Z,1478857543.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:44.284Z,1478857544.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:44.301Z,1478857544.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:44.664Z,1478857544.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:44.696Z,1478857544.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:45.071Z,1478857545.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:45.101Z,1478857545.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:45.469Z,1478857545.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:45.493Z,1478857545.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:45.861Z,1478857545.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:45.887Z,1478857545.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:46.261Z,1478857546.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:46.296Z,1478857546.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:46.678Z,1478857546.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:46.694Z,1478857546.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:47.077Z,1478857547.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:47.097Z,1478857547.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:47.461Z,1478857547.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:47.493Z,1478857547.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:47.866Z,1478857547.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:47.901Z,1478857547.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:48.261Z,1478857548.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:48.298Z,1478857548.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:48.674Z,1478857548.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:48.709Z,1478857548.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:49.066Z,1478857549.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:49.082Z,1478857549.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:49.469Z,1478857549.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:49.489Z,1478857549.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:49.872Z,1478857549.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:49.887Z,1478857549.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:50.273Z,1478857550.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:50.293Z,1478857550.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:50.677Z,1478857550.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:50.697Z,1478857550.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:51.061Z,1478857551.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:51.097Z,1478857551.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:51.462Z,1478857551.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:51.497Z,1478857551.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:51.861Z,1478857551.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:51.901Z,1478857551.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:52.261Z,1478857552.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:52.301Z,1478857552.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:52.676Z,1478857552.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:52.712Z,1478857552.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:53.080Z,1478857553.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:53.118Z,1478857553.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:53.154Z,1478857553.155 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T09:45:53.463Z,1478857553.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:53.478Z,1478857553.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:53.866Z,1478857553.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:53.937Z,1478857553.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:54.265Z,1478857554.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:54.281Z,1478857554.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:54.677Z,1478857554.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:54.731Z,1478857554.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:55.069Z,1478857555.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:55.090Z,1478857555.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:55.124Z,1478857555.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:55.464Z,1478857555.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:55.520Z,1478857555.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:55.869Z,1478857555.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:55.920Z,1478857555.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:55.932Z,1478857555.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:56.269Z,1478857556.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:56.290Z,1478857556.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:56.661Z,1478857556.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:56.694Z,1478857556.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:57.085Z,1478857557.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:57.102Z,1478857557.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:57.480Z,1478857557.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:57.508Z,1478857557.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:57.861Z,1478857557.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:57.897Z,1478857557.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:58.261Z,1478857558.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:58.297Z,1478857558.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:58.661Z,1478857558.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:58.688Z,1478857558.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:59.064Z,1478857559.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:59.089Z,1478857559.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:59.465Z,1478857559.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:59.485Z,1478857559.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:45:59.865Z,1478857559.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:45:59.880Z,1478857559.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:00.274Z,1478857560.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:00.289Z,1478857560.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:00.669Z,1478857560.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:00.689Z,1478857560.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:01.079Z,1478857561.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:01.094Z,1478857561.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:01.474Z,1478857561.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:01.505Z,1478857561.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:01.868Z,1478857561.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:01.889Z,1478857561.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:02.261Z,1478857562.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:02.297Z,1478857562.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:02.661Z,1478857562.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:02.687Z,1478857562.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:03.076Z,1478857563.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:03.092Z,1478857563.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:03.461Z,1478857563.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:03.496Z,1478857563.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:03.861Z,1478857563.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:03.893Z,1478857563.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:04.261Z,1478857564.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:04.296Z,1478857564.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:04.678Z,1478857564.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:04.694Z,1478857564.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:05.061Z,1478857565.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:05.093Z,1478857565.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:05.491Z,1478857565.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:05.513Z,1478857565.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:05.876Z,1478857565.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:05.909Z,1478857565.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:06.276Z,1478857566.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:06.309Z,1478857566.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:06.684Z,1478857566.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:06.706Z,1478857566.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:07.066Z,1478857567.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:07.102Z,1478857567.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:07.462Z,1478857567.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:07.502Z,1478857567.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:10.846Z,1478857570.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:10.918Z,1478857570.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:11.068Z,1478857571.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:11.093Z,1478857571.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:11.449Z,1478857571.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:11.473Z,1478857571.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:11.858Z,1478857571.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:11.909Z,1478857571.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:12.242Z,1478857572.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:12.266Z,1478857572.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:12.649Z,1478857572.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:12.702Z,1478857572.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:13.044Z,1478857573.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:13.112Z,1478857573.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:13.442Z,1478857573.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:13.478Z,1478857573.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:13.837Z,1478857573.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:13.873Z,1478857573.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:14.237Z,1478857574.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:14.275Z,1478857574.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:14.650Z,1478857574.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:14.684Z,1478857574.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:15.045Z,1478857575.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:15.077Z,1478857575.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:15.438Z,1478857575.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:15.481Z,1478857575.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:15.852Z,1478857575.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:15.889Z,1478857575.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:16.248Z,1478857576.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:16.277Z,1478857576.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:16.664Z,1478857576.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:16.701Z,1478857576.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:17.048Z,1478857577.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:17.064Z,1478857577.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:17.442Z,1478857577.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:17.458Z,1478857577.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:17.846Z,1478857577.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:17.861Z,1478857577.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:18.252Z,1478857578.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:18.268Z,1478857578.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:18.653Z,1478857578.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:18.668Z,1478857578.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:19.037Z,1478857579.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:19.069Z,1478857579.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:19.453Z,1478857579.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:19.473Z,1478857579.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:19.841Z,1478857579.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:19.873Z,1478857579.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:20.238Z,1478857580.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:20.277Z,1478857580.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:20.659Z,1478857580.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:20.683Z,1478857580.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:21.052Z,1478857581.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:21.077Z,1478857581.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:21.438Z,1478857581.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:21.469Z,1478857581.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:21.840Z,1478857581.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:21.872Z,1478857581.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:22.240Z,1478857582.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:22.272Z,1478857582.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:22.661Z,1478857582.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:22.689Z,1478857582.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:23.056Z,1478857583.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:23.084Z,1478857583.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:23.456Z,1478857583.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:23.484Z,1478857583.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:23.861Z,1478857583.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:23.892Z,1478857583.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:24.242Z,1478857584.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:24.274Z,1478857584.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:24.638Z,1478857584.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:24.654Z,1478857584.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:25.046Z,1478857585.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:25.125Z,1478857585.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:25.446Z,1478857585.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:25.474Z,1478857585.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:25.845Z,1478857585.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:25.861Z,1478857585.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:26.249Z,1478857586.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:26.301Z,1478857586.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:26.645Z,1478857586.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:26.661Z,1478857586.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:27.057Z,1478857587.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:27.113Z,1478857587.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:27.452Z,1478857587.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:27.497Z,1478857587.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:27.860Z,1478857587.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:27.891Z,1478857587.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:28.256Z,1478857588.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:28.272Z,1478857588.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:28.654Z,1478857588.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:28.681Z,1478857588.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:29.049Z,1478857589.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:29.069Z,1478857589.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:29.437Z,1478857589.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:29.473Z,1478857589.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:29.838Z,1478857589.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:29.875Z,1478857589.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:30.238Z,1478857590.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:30.266Z,1478857590.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:30.666Z,1478857590.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:30.693Z,1478857590.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:31.043Z,1478857591.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:31.073Z,1478857591.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:31.438Z,1478857591.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:31.466Z,1478857591.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:31.837Z,1478857591.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:31.877Z,1478857591.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:32.237Z,1478857592.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:32.287Z,1478857592.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:32.664Z,1478857592.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:32.688Z,1478857592.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:33.053Z,1478857593.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:33.079Z,1478857593.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:33.451Z,1478857593.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:33.488Z,1478857593.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:33.848Z,1478857593.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:33.875Z,1478857593.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:34.249Z,1478857594.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:34.285Z,1478857594.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:34.649Z,1478857594.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:34.687Z,1478857594.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:35.040Z,1478857595.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:35.065Z,1478857595.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:35.451Z,1478857595.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:35.473Z,1478857595.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:35.845Z,1478857595.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:35.860Z,1478857595.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:36.240Z,1478857596.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:36.272Z,1478857596.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:36.652Z,1478857596.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:36.676Z,1478857596.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:37.038Z,1478857597.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:37.069Z,1478857597.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:37.437Z,1478857597.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:37.470Z,1478857597.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:37.860Z,1478857597.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:37.881Z,1478857597.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:38.256Z,1478857598.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:38.286Z,1478857598.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:38.664Z,1478857598.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:38.680Z,1478857598.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:39.048Z,1478857599.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:39.097Z,1478857599.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:39.438Z,1478857599.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:39.505Z,1478857599.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:39.843Z,1478857599.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:39.862Z,1478857599.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:40.241Z,1478857600.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:40.293Z,1478857600.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:40.644Z,1478857600.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:40.659Z,1478857600.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:41.044Z,1478857601.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:41.095Z,1478857601.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:41.440Z,1478857601.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:41.487Z,1478857601.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:41.845Z,1478857601.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:41.860Z,1478857601.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:42.240Z,1478857602.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:42.268Z,1478857602.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:42.652Z,1478857602.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:42.674Z,1478857602.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:43.059Z,1478857603.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:43.074Z,1478857603.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:43.452Z,1478857603.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:43.480Z,1478857603.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:43.859Z,1478857603.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:43.874Z,1478857603.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:44.248Z,1478857604.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:44.262Z,1478857604.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:44.644Z,1478857604.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:44.660Z,1478857604.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:45.048Z,1478857605.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:45.064Z,1478857605.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:45.445Z,1478857605.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:45.465Z,1478857605.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:45.841Z,1478857605.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:45.863Z,1478857605.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:46.249Z,1478857606.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:46.264Z,1478857606.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:46.658Z,1478857606.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:46.686Z,1478857606.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:47.036Z,1478857607.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:47.073Z,1478857607.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:47.441Z,1478857607.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:47.481Z,1478857607.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:47.851Z,1478857607.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:47.887Z,1478857607.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:48.248Z,1478857608.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:48.264Z,1478857608.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:48.649Z,1478857608.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:48.669Z,1478857608.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:49.044Z,1478857609.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:49.073Z,1478857609.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:49.440Z,1478857609.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:49.469Z,1478857609.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:49.857Z,1478857609.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:49.880Z,1478857609.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:50.256Z,1478857610.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:50.277Z,1478857610.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:50.666Z,1478857610.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:50.689Z,1478857610.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:51.059Z,1478857611.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:51.075Z,1478857611.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:51.437Z,1478857611.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:51.481Z,1478857611.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:51.837Z,1478857611.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:51.873Z,1478857611.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:52.241Z,1478857612.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:52.250Z,1478857612.250 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T09:46:52.250Z,1478857612.250 [BPC1] Data Fault, FailCount= 1
2016-11-11T09:46:52.250Z,1478857612.250 [BPC1](ERROR): Data Fault
2016-11-11T09:46:52.258Z,1478857612.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:52.318Z,1478857612.318 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:46:52.641Z,1478857612.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:52.664Z,1478857612.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:53.044Z,1478857613.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:53.060Z,1478857613.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:53.445Z,1478857613.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:53.466Z,1478857613.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:53.494Z,1478857613.494 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:46:53.494Z,1478857613.494 [BPC1] No Fault, FailCount= 1
2016-11-11T09:46:53.837Z,1478857613.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:53.914Z,1478857613.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:54.249Z,1478857614.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:54.269Z,1478857614.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:54.663Z,1478857614.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:54.712Z,1478857614.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:55.056Z,1478857615.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:55.071Z,1478857615.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:55.437Z,1478857615.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:55.469Z,1478857615.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:55.841Z,1478857615.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:55.873Z,1478857615.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:56.237Z,1478857616.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:56.263Z,1478857616.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:56.653Z,1478857616.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:56.674Z,1478857616.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:57.041Z,1478857617.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:57.067Z,1478857617.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:57.437Z,1478857617.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:57.474Z,1478857617.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:57.837Z,1478857617.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:57.869Z,1478857617.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:58.237Z,1478857618.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:58.273Z,1478857618.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:58.667Z,1478857618.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:58.686Z,1478857618.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:59.048Z,1478857619.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:59.082Z,1478857619.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:59.464Z,1478857619.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:59.479Z,1478857619.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:46:59.852Z,1478857619.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:46:59.886Z,1478857619.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:00.237Z,1478857620.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:00.273Z,1478857620.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:00.637Z,1478857620.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:00.657Z,1478857620.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:01.037Z,1478857621.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:01.057Z,1478857621.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:01.441Z,1478857621.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:01.456Z,1478857621.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:01.845Z,1478857621.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:01.865Z,1478857621.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:02.240Z,1478857622.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:02.272Z,1478857622.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:02.659Z,1478857622.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:02.703Z,1478857622.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:03.037Z,1478857623.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:03.063Z,1478857623.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:03.438Z,1478857623.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:03.469Z,1478857623.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:03.856Z,1478857623.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:03.884Z,1478857623.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:04.252Z,1478857624.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:04.278Z,1478857624.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:04.646Z,1478857624.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:04.673Z,1478857624.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:05.037Z,1478857625.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:05.065Z,1478857625.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:05.441Z,1478857625.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:05.481Z,1478857625.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:05.838Z,1478857625.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:05.853Z,1478857625.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:06.250Z,1478857626.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:06.266Z,1478857626.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:06.645Z,1478857626.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:06.717Z,1478857626.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:06.738Z,1478857626.739 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T09:42:06.5Z
2016-11-11T09:47:06.739Z,1478857626.739 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T09:47:06.739Z,1478857626.739 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T09:47:07.060Z,1478857627.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:07.100Z,1478857627.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:07.928Z,1478857627.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:07.998Z,1478857627.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:08.073Z,1478857628.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:08.101Z,1478857628.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:11.482Z,1478857631.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:11.556Z,1478857631.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:11.606Z,1478857631.606 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0116.lzma
2016-11-11T09:47:11.652Z,1478857631.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:11.681Z,1478857631.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:12.017Z,1478857632.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:12.073Z,1478857632.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:12.392Z,1478857632.392 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0116.lzma.bak
2016-11-11T09:47:12.392Z,1478857632.392 [DataOverHttps](INFO): SBD MOMSN=4555291
2016-11-11T09:47:12.477Z,1478857632.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:12.530Z,1478857632.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:13.783Z,1478857633.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:13.799Z,1478857633.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:13.888Z,1478857633.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:13.925Z,1478857633.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:17.312Z,1478857637.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:17.337Z,1478857637.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:17.456Z,1478857637.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:17.485Z,1478857637.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:17.797Z,1478857637.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:17.833Z,1478857637.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:18.193Z,1478857638.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:18.208Z,1478857638.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:18.600Z,1478857638.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:18.637Z,1478857638.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:19.011Z,1478857639.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:19.027Z,1478857639.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:22.433Z,1478857642.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:22.469Z,1478857642.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:22.527Z,1478857642.527 [DataOverHttps](INFO): Sending 237 bytes from file Logs/20161111T044527/Express0117.lzma
2016-11-11T09:47:22.564Z,1478857642.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:22.601Z,1478857642.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:22.942Z,1478857642.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:22.958Z,1478857642.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:23.321Z,1478857643.321 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0117.lzma.bak
2016-11-11T09:47:23.321Z,1478857643.321 [DataOverHttps](INFO): SBD MOMSN=4555293
2016-11-11T09:47:23.359Z,1478857643.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:23.395Z,1478857643.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:24.684Z,1478857644.684 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T09:47:24.701Z,1478857644.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:24.782Z,1478857644.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:24.800Z,1478857644.800 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T09:47:24.800Z,1478857644.800 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T09:47:24.800Z,1478857644.800 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T09:47:24.873Z,1478857644.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:24.896Z,1478857644.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:28.214Z,1478857648.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:28.264Z,1478857648.264 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:28.264Z,1478857648.264 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80
2016-11-11T09:47:28.264Z,1478857648.264 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:47:28.271Z,1478857648.270 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:28.271Z,1478857648.271 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 80
2016-11-11T09:47:28.271Z,1478857648.271 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:47:28.273Z,1478857648.273 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:28.273Z,1478857648.273 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 80
2016-11-11T09:47:28.273Z,1478857648.273 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:47:28.287Z,1478857648.287 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:47:28.287Z,1478857648.287 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:47:28.288Z,1478857648.288 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:47:28.406Z,1478857648.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:28.497Z,1478857648.497 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:47:28.497Z,1478857648.497 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80
2016-11-11T09:47:28.498Z,1478857648.498 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:47:28.498Z,1478857648.498 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 80
2016-11-11T09:47:28.498Z,1478857648.498 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:47:28.498Z,1478857648.499 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 80
2016-11-11T09:47:28.717Z,1478857648.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:28.778Z,1478857648.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:47:28.779Z,1478857648.779 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:47:28.779Z,1478857648.779 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:47:28.784Z,1478857648.784 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:47:28.784Z,1478857648.784 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:47:28.785Z,1478857648.785 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:47:28.785Z,1478857648.785 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:47:28.785Z,1478857648.786 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:47:28.786Z,1478857648.786 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:47:29.117Z,1478857649.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:29.162Z,1478857649.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:29.517Z,1478857649.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:29.548Z,1478857649.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:29.900Z,1478857649.900 [NAL9602](INFO): Powering down
2016-11-11T09:47:29.922Z,1478857649.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:29.969Z,1478857649.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:30.324Z,1478857650.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:30.384Z,1478857650.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:30.724Z,1478857650.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:30.743Z,1478857650.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:31.124Z,1478857651.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:31.152Z,1478857651.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:31.526Z,1478857651.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:31.541Z,1478857651.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:31.925Z,1478857651.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:31.957Z,1478857651.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:32.317Z,1478857652.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:32.362Z,1478857652.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:32.718Z,1478857652.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:32.749Z,1478857652.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:33.118Z,1478857653.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:33.153Z,1478857653.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:33.517Z,1478857653.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:33.549Z,1478857653.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:33.917Z,1478857653.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:33.986Z,1478857653.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:34.319Z,1478857654.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:34.347Z,1478857654.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:34.718Z,1478857654.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:34.758Z,1478857654.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:35.117Z,1478857655.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:35.154Z,1478857655.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:35.517Z,1478857655.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:35.548Z,1478857655.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:35.927Z,1478857655.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:35.954Z,1478857655.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:36.324Z,1478857656.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:36.357Z,1478857656.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:36.723Z,1478857656.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:36.762Z,1478857656.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:37.131Z,1478857657.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:37.142Z,1478857657.142 [PNI_TCM](ERROR): CRC does not match. Expected:0x52257 got:0x48743
2016-11-11T09:47:37.162Z,1478857657.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:37.527Z,1478857657.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:37.549Z,1478857657.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:37.919Z,1478857657.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:37.955Z,1478857657.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:38.317Z,1478857658.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:38.392Z,1478857658.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:38.718Z,1478857658.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:38.746Z,1478857658.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:39.119Z,1478857659.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:39.153Z,1478857659.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:39.522Z,1478857659.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:39.553Z,1478857659.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:39.917Z,1478857659.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:39.971Z,1478857659.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:40.319Z,1478857660.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:40.369Z,1478857660.369 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2016-11-11T09:47:40.410Z,1478857660.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:40.724Z,1478857660.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:40.739Z,1478857660.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:41.124Z,1478857661.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:41.205Z,1478857661.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:41.525Z,1478857661.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:41.543Z,1478857661.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:41.927Z,1478857661.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:41.950Z,1478857661.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:42.345Z,1478857662.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:42.410Z,1478857662.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:42.717Z,1478857662.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:42.749Z,1478857662.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:43.126Z,1478857663.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:43.185Z,1478857663.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:43.519Z,1478857663.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:43.576Z,1478857663.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:43.919Z,1478857663.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:43.955Z,1478857663.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:44.317Z,1478857664.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:44.407Z,1478857664.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:44.718Z,1478857664.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:44.736Z,1478857664.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:45.122Z,1478857665.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:45.138Z,1478857665.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:45.523Z,1478857665.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:45.538Z,1478857665.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:45.946Z,1478857665.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:45.961Z,1478857665.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:46.328Z,1478857666.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:46.352Z,1478857666.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:46.722Z,1478857666.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:46.762Z,1478857666.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:47.128Z,1478857667.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:47.153Z,1478857667.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:47.518Z,1478857667.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:47.553Z,1478857667.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:47.923Z,1478857667.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:47.960Z,1478857667.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:48.325Z,1478857668.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:48.371Z,1478857668.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:48.726Z,1478857668.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:48.746Z,1478857668.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:49.127Z,1478857669.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:49.151Z,1478857669.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:49.522Z,1478857669.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:49.564Z,1478857669.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:49.923Z,1478857669.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:49.967Z,1478857669.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:50.326Z,1478857670.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:50.358Z,1478857670.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:50.719Z,1478857670.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:50.753Z,1478857670.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:51.125Z,1478857671.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:51.165Z,1478857671.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:51.526Z,1478857671.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:51.578Z,1478857671.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:51.919Z,1478857671.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:51.965Z,1478857671.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:52.340Z,1478857672.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:52.414Z,1478857672.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:52.722Z,1478857672.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:52.762Z,1478857672.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:53.123Z,1478857673.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:53.147Z,1478857673.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:53.528Z,1478857673.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:53.552Z,1478857673.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:53.933Z,1478857673.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:53.986Z,1478857673.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:54.342Z,1478857674.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:54.382Z,1478857674.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:54.735Z,1478857674.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:54.769Z,1478857674.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:55.121Z,1478857675.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:55.138Z,1478857675.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:55.544Z,1478857675.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:55.632Z,1478857675.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:55.930Z,1478857675.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:55.946Z,1478857675.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:56.361Z,1478857676.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:56.414Z,1478857676.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:56.725Z,1478857676.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:56.752Z,1478857676.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:57.117Z,1478857677.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:57.158Z,1478857677.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:57.518Z,1478857677.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:57.581Z,1478857677.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:57.917Z,1478857677.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:57.938Z,1478857677.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:58.382Z,1478857678.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:58.426Z,1478857678.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:58.721Z,1478857678.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:58.753Z,1478857678.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:59.121Z,1478857679.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:59.169Z,1478857679.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:59.519Z,1478857679.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:59.574Z,1478857679.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:47:59.923Z,1478857679.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:47:59.970Z,1478857679.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:00.326Z,1478857680.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:00.341Z,1478857680.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:00.723Z,1478857680.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:00.767Z,1478857680.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:01.123Z,1478857681.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:01.169Z,1478857681.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:01.525Z,1478857681.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:01.570Z,1478857681.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:01.919Z,1478857681.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:01.953Z,1478857681.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:02.319Z,1478857682.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:02.366Z,1478857682.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:02.718Z,1478857682.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:02.750Z,1478857682.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:03.125Z,1478857683.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:03.174Z,1478857683.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:03.526Z,1478857683.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:03.549Z,1478857683.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:03.919Z,1478857683.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:03.969Z,1478857683.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:04.319Z,1478857684.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:04.358Z,1478857684.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:04.719Z,1478857684.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:04.779Z,1478857684.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:05.122Z,1478857685.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:05.171Z,1478857685.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:05.526Z,1478857685.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:05.550Z,1478857685.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:05.917Z,1478857685.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:05.950Z,1478857685.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:06.332Z,1478857686.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:06.387Z,1478857686.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:06.719Z,1478857686.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:06.759Z,1478857686.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:07.123Z,1478857687.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:07.142Z,1478857687.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:07.522Z,1478857687.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:07.576Z,1478857687.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:07.930Z,1478857687.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:07.984Z,1478857687.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:08.326Z,1478857688.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:08.382Z,1478857688.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:08.718Z,1478857688.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:08.766Z,1478857688.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:09.119Z,1478857689.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:09.153Z,1478857689.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:09.527Z,1478857689.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:09.610Z,1478857689.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:09.924Z,1478857689.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:09.982Z,1478857689.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:10.334Z,1478857690.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:10.380Z,1478857690.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:10.728Z,1478857690.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:10.779Z,1478857690.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:11.125Z,1478857691.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:11.159Z,1478857691.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:11.517Z,1478857691.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:11.569Z,1478857691.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:11.917Z,1478857691.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:11.969Z,1478857691.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:12.333Z,1478857692.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:12.360Z,1478857692.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:12.717Z,1478857692.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:12.757Z,1478857692.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:13.117Z,1478857693.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:13.137Z,1478857693.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:13.521Z,1478857693.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:13.541Z,1478857693.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:13.917Z,1478857693.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:13.933Z,1478857693.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:14.318Z,1478857694.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:14.351Z,1478857694.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:14.729Z,1478857694.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:14.757Z,1478857694.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:15.117Z,1478857695.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:15.149Z,1478857695.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:15.517Z,1478857695.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:15.551Z,1478857695.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:15.924Z,1478857695.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:15.947Z,1478857695.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:16.317Z,1478857696.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:16.352Z,1478857696.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:16.717Z,1478857696.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:16.759Z,1478857696.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:17.121Z,1478857697.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:17.147Z,1478857697.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:17.517Z,1478857697.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:17.549Z,1478857697.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:17.917Z,1478857697.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:17.942Z,1478857697.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:18.321Z,1478857698.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:18.354Z,1478857698.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:18.727Z,1478857698.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:18.766Z,1478857698.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:19.117Z,1478857699.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:19.149Z,1478857699.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:19.521Z,1478857699.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:19.547Z,1478857699.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:19.917Z,1478857699.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:19.949Z,1478857699.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:20.325Z,1478857700.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:20.359Z,1478857700.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:20.725Z,1478857700.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:20.751Z,1478857700.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:21.117Z,1478857701.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:21.149Z,1478857701.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:21.518Z,1478857701.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:21.553Z,1478857701.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:21.917Z,1478857701.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:21.953Z,1478857701.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:22.321Z,1478857702.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:22.353Z,1478857702.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:22.717Z,1478857702.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:22.744Z,1478857702.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:23.125Z,1478857703.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:23.157Z,1478857703.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:23.521Z,1478857703.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:23.557Z,1478857703.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:23.929Z,1478857703.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:24.032Z,1478857704.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:24.324Z,1478857704.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:24.386Z,1478857704.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:24.716Z,1478857704.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:24.732Z,1478857704.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:25.118Z,1478857705.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:25.158Z,1478857705.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:28.964Z,1478857708.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:28.979Z,1478857708.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:29.104Z,1478857709.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:29.161Z,1478857709.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:29.485Z,1478857709.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:29.533Z,1478857709.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:29.889Z,1478857709.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:29.904Z,1478857709.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:30.288Z,1478857710.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:30.304Z,1478857710.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:30.692Z,1478857710.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:30.708Z,1478857710.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:31.081Z,1478857711.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:31.107Z,1478857711.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:31.481Z,1478857711.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:31.515Z,1478857711.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:31.881Z,1478857711.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:31.914Z,1478857711.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:32.281Z,1478857712.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:32.296Z,1478857712.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:32.681Z,1478857712.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:32.701Z,1478857712.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:33.084Z,1478857713.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:33.113Z,1478857713.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:33.488Z,1478857713.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:33.509Z,1478857713.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:33.889Z,1478857713.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:33.905Z,1478857713.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:34.305Z,1478857714.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:34.348Z,1478857714.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:34.681Z,1478857714.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:34.745Z,1478857714.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:35.081Z,1478857715.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:35.101Z,1478857715.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:35.484Z,1478857715.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:35.505Z,1478857715.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:35.886Z,1478857715.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:35.901Z,1478857715.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:36.302Z,1478857716.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:36.330Z,1478857716.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:36.690Z,1478857716.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:36.709Z,1478857716.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:37.088Z,1478857717.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:37.105Z,1478857717.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:37.481Z,1478857717.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:37.506Z,1478857717.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:37.881Z,1478857717.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:37.914Z,1478857717.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:38.296Z,1478857718.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:38.329Z,1478857718.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:38.681Z,1478857718.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:38.707Z,1478857718.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:39.081Z,1478857719.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:39.122Z,1478857719.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:39.481Z,1478857719.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:39.513Z,1478857719.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:39.881Z,1478857719.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:39.913Z,1478857719.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:40.287Z,1478857720.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:40.376Z,1478857720.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:40.689Z,1478857720.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:40.721Z,1478857720.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:41.085Z,1478857721.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:41.117Z,1478857721.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:41.481Z,1478857721.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:41.496Z,1478857721.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:41.886Z,1478857721.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:41.937Z,1478857721.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:42.285Z,1478857722.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:42.300Z,1478857722.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:42.681Z,1478857722.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:42.735Z,1478857722.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:43.089Z,1478857723.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:43.109Z,1478857723.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:43.489Z,1478857723.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:43.542Z,1478857723.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:43.612Z,1478857723.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:43.897Z,1478857723.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:43.949Z,1478857723.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:44.288Z,1478857724.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:44.309Z,1478857724.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:44.408Z,1478857724.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:44.724Z,1478857724.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:44.778Z,1478857724.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:45.092Z,1478857725.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:45.108Z,1478857725.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:45.481Z,1478857725.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:45.515Z,1478857725.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:45.881Z,1478857725.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:45.913Z,1478857725.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:46.292Z,1478857726.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:46.308Z,1478857726.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:46.681Z,1478857726.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:46.764Z,1478857726.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:47.087Z,1478857727.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:47.102Z,1478857727.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:47.485Z,1478857727.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:47.500Z,1478857727.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:47.888Z,1478857727.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:47.903Z,1478857727.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:48.292Z,1478857728.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:48.340Z,1478857728.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:48.684Z,1478857728.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:48.713Z,1478857728.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:49.088Z,1478857729.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:49.109Z,1478857729.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:49.487Z,1478857729.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:49.502Z,1478857729.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:49.889Z,1478857729.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:49.915Z,1478857729.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:50.287Z,1478857730.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:50.321Z,1478857730.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:50.681Z,1478857730.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:50.717Z,1478857730.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:51.089Z,1478857731.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:51.115Z,1478857731.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:51.481Z,1478857731.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:51.517Z,1478857731.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:51.881Z,1478857731.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:51.917Z,1478857731.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:52.286Z,1478857732.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:52.322Z,1478857732.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:52.681Z,1478857732.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:52.721Z,1478857732.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:53.089Z,1478857733.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:53.116Z,1478857733.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:53.481Z,1478857733.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:53.501Z,1478857733.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:53.888Z,1478857733.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:53.904Z,1478857733.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:54.295Z,1478857734.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:54.373Z,1478857734.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:54.684Z,1478857734.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:54.714Z,1478857734.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:55.094Z,1478857735.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:55.114Z,1478857735.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:55.489Z,1478857735.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:55.505Z,1478857735.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:55.896Z,1478857735.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:55.912Z,1478857735.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:56.281Z,1478857736.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:56.361Z,1478857736.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:56.688Z,1478857736.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:56.713Z,1478857736.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:57.093Z,1478857737.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:57.143Z,1478857737.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:57.488Z,1478857737.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:57.503Z,1478857737.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:57.608Z,1478857737.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:57.887Z,1478857737.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:57.941Z,1478857737.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:58.295Z,1478857738.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:58.341Z,1478857738.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:58.404Z,1478857738.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:58.713Z,1478857738.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:58.759Z,1478857738.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:59.081Z,1478857739.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:59.113Z,1478857739.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:59.485Z,1478857739.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:59.517Z,1478857739.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:48:59.881Z,1478857739.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:48:59.913Z,1478857739.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:00.281Z,1478857740.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:00.307Z,1478857740.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:00.727Z,1478857740.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:00.776Z,1478857740.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:01.081Z,1478857741.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:01.124Z,1478857741.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:01.481Z,1478857741.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:01.525Z,1478857741.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:01.889Z,1478857741.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:01.923Z,1478857741.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:02.291Z,1478857742.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:02.331Z,1478857742.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:02.687Z,1478857742.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:02.702Z,1478857742.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:03.085Z,1478857743.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:03.101Z,1478857743.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:03.489Z,1478857743.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:03.505Z,1478857743.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:03.890Z,1478857743.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:03.905Z,1478857743.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:04.296Z,1478857744.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:04.331Z,1478857744.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:04.688Z,1478857744.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:04.709Z,1478857744.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:05.082Z,1478857745.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:05.110Z,1478857745.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:05.482Z,1478857745.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:05.520Z,1478857745.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:05.886Z,1478857745.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:05.917Z,1478857745.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:06.283Z,1478857746.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:06.337Z,1478857746.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:06.682Z,1478857746.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:06.717Z,1478857746.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:07.085Z,1478857747.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:07.125Z,1478857747.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:07.481Z,1478857747.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:07.517Z,1478857747.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:07.886Z,1478857747.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:07.902Z,1478857747.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:08.281Z,1478857748.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:08.296Z,1478857748.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:08.688Z,1478857748.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:08.704Z,1478857748.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:09.088Z,1478857749.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:09.149Z,1478857749.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:09.488Z,1478857749.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:09.509Z,1478857749.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:09.888Z,1478857749.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:09.904Z,1478857749.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:10.305Z,1478857750.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:10.395Z,1478857750.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:10.681Z,1478857750.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:10.713Z,1478857750.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:11.088Z,1478857751.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:11.104Z,1478857751.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:11.481Z,1478857751.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:11.522Z,1478857751.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:11.881Z,1478857751.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:11.915Z,1478857751.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:12.281Z,1478857752.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:12.333Z,1478857752.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:12.705Z,1478857752.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:12.769Z,1478857752.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:13.081Z,1478857753.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:13.096Z,1478857753.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:13.487Z,1478857753.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:13.502Z,1478857753.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:13.886Z,1478857753.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:13.909Z,1478857753.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:14.284Z,1478857754.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:14.305Z,1478857754.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:14.704Z,1478857754.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:14.738Z,1478857754.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:15.088Z,1478857755.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:15.103Z,1478857755.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:15.488Z,1478857755.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:15.511Z,1478857755.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:15.889Z,1478857755.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:15.905Z,1478857755.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:16.289Z,1478857756.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:16.313Z,1478857756.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:16.681Z,1478857756.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:16.713Z,1478857756.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:17.081Z,1478857757.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:17.114Z,1478857757.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:17.481Z,1478857757.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:17.512Z,1478857757.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:17.881Z,1478857757.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:17.917Z,1478857757.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:18.281Z,1478857758.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:18.312Z,1478857758.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:18.681Z,1478857758.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:18.716Z,1478857758.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:19.081Z,1478857759.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:19.116Z,1478857759.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:19.481Z,1478857759.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:19.508Z,1478857759.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:19.881Z,1478857759.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:19.921Z,1478857759.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:20.281Z,1478857760.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:20.301Z,1478857760.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:20.681Z,1478857760.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:20.697Z,1478857760.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:21.081Z,1478857761.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:21.097Z,1478857761.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:21.484Z,1478857761.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:21.505Z,1478857761.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:21.881Z,1478857761.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:21.914Z,1478857761.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:22.281Z,1478857762.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:22.315Z,1478857762.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:22.685Z,1478857762.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:22.717Z,1478857762.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:23.081Z,1478857763.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:23.113Z,1478857763.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:23.481Z,1478857763.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:23.501Z,1478857763.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:23.885Z,1478857763.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:23.941Z,1478857763.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:24.325Z,1478857764.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:24.364Z,1478857764.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:24.685Z,1478857764.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:24.717Z,1478857764.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:25.081Z,1478857765.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:25.141Z,1478857765.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:25.489Z,1478857765.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:25.504Z,1478857765.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:28.913Z,1478857768.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:28.970Z,1478857768.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:29.130Z,1478857769.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:29.162Z,1478857769.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:29.512Z,1478857769.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:29.567Z,1478857769.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:29.897Z,1478857769.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:29.950Z,1478857769.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:30.297Z,1478857770.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:30.323Z,1478857770.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:30.708Z,1478857770.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:30.732Z,1478857770.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:31.097Z,1478857771.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:31.130Z,1478857771.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:31.497Z,1478857771.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:31.529Z,1478857771.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:31.897Z,1478857771.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:31.929Z,1478857771.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:32.305Z,1478857772.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:32.332Z,1478857772.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:32.697Z,1478857772.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:32.733Z,1478857772.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:33.097Z,1478857773.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:33.133Z,1478857773.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:33.497Z,1478857773.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:33.533Z,1478857773.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:33.897Z,1478857773.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:33.933Z,1478857773.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:34.297Z,1478857774.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:34.326Z,1478857774.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:34.701Z,1478857774.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:34.721Z,1478857774.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:35.100Z,1478857775.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:35.116Z,1478857775.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:35.504Z,1478857775.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:35.519Z,1478857775.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:35.905Z,1478857775.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:35.920Z,1478857775.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:36.309Z,1478857776.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:36.324Z,1478857776.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:36.704Z,1478857776.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:36.719Z,1478857776.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:37.105Z,1478857777.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:37.133Z,1478857777.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:37.500Z,1478857777.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:37.523Z,1478857777.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:37.897Z,1478857777.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:37.929Z,1478857777.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:38.310Z,1478857778.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:38.338Z,1478857778.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:38.697Z,1478857778.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:38.737Z,1478857778.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:39.097Z,1478857779.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:39.117Z,1478857779.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:39.501Z,1478857779.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:39.521Z,1478857779.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:39.901Z,1478857779.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:39.921Z,1478857779.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:40.305Z,1478857780.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:40.338Z,1478857780.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:40.712Z,1478857780.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:40.748Z,1478857780.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:41.108Z,1478857781.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:41.129Z,1478857781.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:41.497Z,1478857781.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:41.523Z,1478857781.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:41.908Z,1478857781.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:41.965Z,1478857781.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:42.297Z,1478857782.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:42.334Z,1478857782.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:42.701Z,1478857782.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:42.749Z,1478857782.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:43.098Z,1478857783.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:43.126Z,1478857783.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:43.498Z,1478857783.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:43.557Z,1478857783.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:43.898Z,1478857783.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:43.946Z,1478857783.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:44.297Z,1478857784.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:44.313Z,1478857784.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:44.705Z,1478857784.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:44.729Z,1478857784.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:45.097Z,1478857785.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:45.146Z,1478857785.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:45.508Z,1478857785.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:45.525Z,1478857785.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:45.903Z,1478857785.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:45.919Z,1478857785.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:46.309Z,1478857786.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:46.325Z,1478857786.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:46.704Z,1478857786.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:46.718Z,1478857786.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:47.105Z,1478857787.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:47.121Z,1478857787.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:47.505Z,1478857787.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:47.525Z,1478857787.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:47.904Z,1478857787.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:47.919Z,1478857787.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:48.308Z,1478857788.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:48.330Z,1478857788.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:48.697Z,1478857788.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:48.726Z,1478857788.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:49.097Z,1478857789.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:49.132Z,1478857789.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:49.497Z,1478857789.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:49.533Z,1478857789.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:49.897Z,1478857789.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:49.936Z,1478857789.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:50.297Z,1478857790.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:50.333Z,1478857790.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:50.697Z,1478857790.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:50.733Z,1478857790.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:51.097Z,1478857791.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:51.133Z,1478857791.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:51.497Z,1478857791.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:51.536Z,1478857791.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:51.897Z,1478857791.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:51.933Z,1478857791.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:52.305Z,1478857792.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:52.350Z,1478857792.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:52.697Z,1478857792.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:52.741Z,1478857792.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:53.101Z,1478857793.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:53.137Z,1478857793.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:53.497Z,1478857793.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:53.542Z,1478857793.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:53.897Z,1478857793.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:53.937Z,1478857793.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:54.300Z,1478857794.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:54.316Z,1478857794.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:54.705Z,1478857794.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:54.773Z,1478857794.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:55.107Z,1478857795.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:55.127Z,1478857795.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:55.504Z,1478857795.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:55.519Z,1478857795.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:55.905Z,1478857795.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:55.942Z,1478857795.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:56.297Z,1478857796.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:56.330Z,1478857796.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:56.697Z,1478857796.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:56.723Z,1478857796.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:57.097Z,1478857797.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:57.163Z,1478857797.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:57.497Z,1478857797.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:57.522Z,1478857797.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:57.897Z,1478857797.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:57.962Z,1478857797.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:58.297Z,1478857798.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:58.350Z,1478857798.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:58.701Z,1478857798.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:58.733Z,1478857798.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:59.097Z,1478857799.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:59.129Z,1478857799.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:59.497Z,1478857799.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:59.531Z,1478857799.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:49:59.901Z,1478857799.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:49:59.933Z,1478857799.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:00.308Z,1478857800.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:00.331Z,1478857800.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:00.697Z,1478857800.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:00.729Z,1478857800.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:01.097Z,1478857801.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:01.137Z,1478857801.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:01.497Z,1478857801.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:01.533Z,1478857801.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:01.900Z,1478857801.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:01.942Z,1478857801.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:02.309Z,1478857802.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:02.340Z,1478857802.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:02.697Z,1478857802.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:02.717Z,1478857802.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:03.102Z,1478857803.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:03.117Z,1478857803.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:03.500Z,1478857803.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:03.515Z,1478857803.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:03.905Z,1478857803.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:03.920Z,1478857803.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:04.309Z,1478857804.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:04.324Z,1478857804.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:04.704Z,1478857804.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:04.719Z,1478857804.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:05.108Z,1478857805.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:05.124Z,1478857805.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:05.508Z,1478857805.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:05.523Z,1478857805.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:05.905Z,1478857805.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:05.925Z,1478857805.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:06.312Z,1478857806.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:06.344Z,1478857806.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:06.701Z,1478857806.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:06.734Z,1478857806.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:07.097Z,1478857807.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:07.122Z,1478857807.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:07.501Z,1478857807.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:07.538Z,1478857807.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:07.897Z,1478857807.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:07.929Z,1478857807.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:08.305Z,1478857808.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:08.337Z,1478857808.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:08.721Z,1478857808.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:08.778Z,1478857808.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:09.097Z,1478857809.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:09.140Z,1478857809.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:09.497Z,1478857809.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:09.533Z,1478857809.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:09.902Z,1478857809.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:09.918Z,1478857809.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:10.300Z,1478857810.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:10.356Z,1478857810.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:10.703Z,1478857810.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:10.719Z,1478857810.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:11.100Z,1478857811.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:11.128Z,1478857811.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:11.508Z,1478857811.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:11.561Z,1478857811.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:11.900Z,1478857811.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:11.937Z,1478857811.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:12.297Z,1478857812.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:12.353Z,1478857812.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:12.709Z,1478857812.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:12.730Z,1478857812.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:13.097Z,1478857813.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:13.146Z,1478857813.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:13.501Z,1478857813.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:13.537Z,1478857813.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:13.897Z,1478857813.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:13.924Z,1478857813.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:14.305Z,1478857814.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:14.330Z,1478857814.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:14.701Z,1478857814.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:14.733Z,1478857814.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:15.097Z,1478857815.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:15.133Z,1478857815.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:15.497Z,1478857815.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:15.532Z,1478857815.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:15.897Z,1478857815.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:15.936Z,1478857815.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:16.297Z,1478857816.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:16.317Z,1478857816.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:16.702Z,1478857816.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:16.721Z,1478857816.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:17.097Z,1478857817.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:17.141Z,1478857817.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:17.504Z,1478857817.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:17.525Z,1478857817.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:17.902Z,1478857817.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:17.917Z,1478857817.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:18.309Z,1478857818.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:18.329Z,1478857818.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:18.709Z,1478857818.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:18.725Z,1478857818.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:19.106Z,1478857819.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:19.129Z,1478857819.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:19.497Z,1478857819.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:19.533Z,1478857819.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:19.897Z,1478857819.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:19.931Z,1478857819.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:20.298Z,1478857820.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:20.329Z,1478857820.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:20.698Z,1478857820.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:20.724Z,1478857820.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:21.097Z,1478857821.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:21.129Z,1478857821.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:21.502Z,1478857821.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:21.546Z,1478857821.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:21.897Z,1478857821.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:21.924Z,1478857821.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:22.297Z,1478857822.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:22.324Z,1478857822.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:22.697Z,1478857822.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:22.729Z,1478857822.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:23.097Z,1478857823.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:23.133Z,1478857823.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:23.497Z,1478857823.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:23.557Z,1478857823.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:23.901Z,1478857823.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:23.921Z,1478857823.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:24.304Z,1478857824.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:24.320Z,1478857824.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:24.709Z,1478857824.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:24.724Z,1478857824.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:25.105Z,1478857825.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:25.157Z,1478857825.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:25.505Z,1478857825.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:25.521Z,1478857825.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:28.920Z,1478857828.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:28.985Z,1478857828.985 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:28.985Z,1478857828.985 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81
2016-11-11T09:50:28.985Z,1478857828.985 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:50:28.994Z,1478857828.994 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:28.994Z,1478857828.994 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 81
2016-11-11T09:50:28.994Z,1478857828.994 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:50:29.028Z,1478857829.028 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:29.028Z,1478857829.028 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 81
2016-11-11T09:50:29.028Z,1478857829.028 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:50:29.054Z,1478857829.054 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:50:29.054Z,1478857829.054 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:50:29.054Z,1478857829.054 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:50:29.127Z,1478857829.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:29.195Z,1478857829.195 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:50:29.195Z,1478857829.195 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81
2016-11-11T09:50:29.196Z,1478857829.196 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:50:29.196Z,1478857829.196 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 81
2016-11-11T09:50:29.197Z,1478857829.197 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:50:29.197Z,1478857829.197 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 81
2016-11-11T09:50:29.497Z,1478857829.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:29.544Z,1478857829.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:50:29.545Z,1478857829.545 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:50:29.545Z,1478857829.545 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:50:29.550Z,1478857829.550 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:50:29.550Z,1478857829.550 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:50:29.551Z,1478857829.551 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:50:29.551Z,1478857829.551 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:50:29.552Z,1478857829.552 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:50:29.552Z,1478857829.552 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:50:29.893Z,1478857829.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:29.945Z,1478857829.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:30.300Z,1478857830.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:30.333Z,1478857830.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:30.697Z,1478857830.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:30.733Z,1478857830.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:31.093Z,1478857831.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:31.133Z,1478857831.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:31.493Z,1478857831.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:31.508Z,1478857831.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:31.897Z,1478857831.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:31.912Z,1478857831.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:32.305Z,1478857832.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:32.342Z,1478857832.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:32.696Z,1478857832.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:32.712Z,1478857832.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:33.096Z,1478857833.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:33.146Z,1478857833.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:33.498Z,1478857833.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:33.513Z,1478857833.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:33.896Z,1478857833.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:33.912Z,1478857833.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:34.301Z,1478857834.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:34.321Z,1478857834.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:34.700Z,1478857834.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:34.721Z,1478857834.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:35.100Z,1478857835.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:35.115Z,1478857835.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:35.500Z,1478857835.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:35.521Z,1478857835.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:35.900Z,1478857835.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:35.915Z,1478857835.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:36.301Z,1478857836.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:36.323Z,1478857836.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:36.705Z,1478857836.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:36.725Z,1478857836.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:37.093Z,1478857837.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:37.130Z,1478857837.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:37.493Z,1478857837.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:37.521Z,1478857837.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:37.897Z,1478857837.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:37.930Z,1478857837.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:38.293Z,1478857838.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:38.308Z,1478857838.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:38.693Z,1478857838.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:38.713Z,1478857838.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:39.098Z,1478857839.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:39.114Z,1478857839.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:39.500Z,1478857839.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:39.516Z,1478857839.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:39.896Z,1478857839.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:39.912Z,1478857839.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:40.305Z,1478857840.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:40.320Z,1478857840.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:40.703Z,1478857840.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:40.757Z,1478857840.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:41.100Z,1478857841.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:41.116Z,1478857841.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:41.508Z,1478857841.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:41.524Z,1478857841.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:41.900Z,1478857841.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:41.934Z,1478857841.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:42.308Z,1478857842.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:42.329Z,1478857842.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:42.697Z,1478857842.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:42.746Z,1478857842.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:43.097Z,1478857843.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:43.122Z,1478857843.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:43.493Z,1478857843.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:43.541Z,1478857843.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:43.893Z,1478857843.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:43.941Z,1478857843.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:44.293Z,1478857844.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:44.329Z,1478857844.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:44.693Z,1478857844.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:44.724Z,1478857844.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:45.101Z,1478857845.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:45.129Z,1478857845.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:45.493Z,1478857845.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:45.513Z,1478857845.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:45.900Z,1478857845.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:45.916Z,1478857845.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:46.305Z,1478857846.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:46.320Z,1478857846.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:46.702Z,1478857846.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:46.721Z,1478857846.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:47.100Z,1478857847.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:47.116Z,1478857847.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:47.508Z,1478857847.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:47.524Z,1478857847.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:47.901Z,1478857847.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:47.916Z,1478857847.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:48.305Z,1478857848.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:48.326Z,1478857848.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:48.700Z,1478857848.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:48.723Z,1478857848.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:49.093Z,1478857849.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:49.126Z,1478857849.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:49.493Z,1478857849.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:49.527Z,1478857849.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:49.901Z,1478857849.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:49.934Z,1478857849.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:50.292Z,1478857850.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:50.329Z,1478857850.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:50.698Z,1478857850.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:50.733Z,1478857850.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:51.101Z,1478857851.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:51.137Z,1478857851.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:51.493Z,1478857851.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:51.513Z,1478857851.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:51.896Z,1478857851.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:51.921Z,1478857851.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:52.304Z,1478857852.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:52.319Z,1478857852.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:52.700Z,1478857852.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:52.715Z,1478857852.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:53.111Z,1478857853.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:53.127Z,1478857853.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:53.505Z,1478857853.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:53.525Z,1478857853.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:53.893Z,1478857853.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:53.918Z,1478857853.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:54.293Z,1478857854.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:54.345Z,1478857854.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:54.715Z,1478857854.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:54.730Z,1478857854.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:55.093Z,1478857855.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:55.125Z,1478857855.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:55.493Z,1478857855.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:55.525Z,1478857855.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:55.894Z,1478857855.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:55.974Z,1478857855.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:56.301Z,1478857856.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:56.316Z,1478857856.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:56.702Z,1478857856.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:56.718Z,1478857856.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:57.096Z,1478857857.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:57.151Z,1478857857.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:57.496Z,1478857857.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:57.521Z,1478857857.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:57.897Z,1478857857.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:57.951Z,1478857857.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:58.308Z,1478857858.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:58.360Z,1478857858.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:58.693Z,1478857858.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:58.735Z,1478857858.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:59.093Z,1478857859.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:59.129Z,1478857859.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:59.493Z,1478857859.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:59.529Z,1478857859.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:50:59.893Z,1478857859.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:50:59.930Z,1478857859.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:00.301Z,1478857860.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:00.328Z,1478857860.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:00.693Z,1478857860.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:00.733Z,1478857860.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:01.093Z,1478857861.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:01.113Z,1478857861.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:01.493Z,1478857861.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:01.525Z,1478857861.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:01.904Z,1478857861.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:01.925Z,1478857861.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:02.307Z,1478857862.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:02.326Z,1478857862.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:02.693Z,1478857862.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:02.725Z,1478857862.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:03.093Z,1478857863.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:03.118Z,1478857863.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:03.372Z,1478857863.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:03.501Z,1478857863.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:03.533Z,1478857863.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:03.893Z,1478857863.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:03.949Z,1478857863.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:04.168Z,1478857864.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:04.292Z,1478857864.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:04.313Z,1478857864.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:04.698Z,1478857864.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:04.713Z,1478857864.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:05.096Z,1478857865.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:05.112Z,1478857865.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:05.500Z,1478857865.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:05.515Z,1478857865.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:05.899Z,1478857865.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:05.923Z,1478857865.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:06.301Z,1478857866.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:06.317Z,1478857866.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:06.705Z,1478857866.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:06.720Z,1478857866.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:07.093Z,1478857867.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:07.119Z,1478857867.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:07.493Z,1478857867.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:07.525Z,1478857867.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:07.893Z,1478857867.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:07.925Z,1478857867.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:08.293Z,1478857868.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:08.313Z,1478857868.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:08.693Z,1478857868.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:08.709Z,1478857868.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:09.093Z,1478857869.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:09.113Z,1478857869.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:09.499Z,1478857869.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:09.508Z,1478857869.508 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T09:51:09.508Z,1478857869.508 [BPC1] Data Fault, FailCount= 1
2016-11-11T09:51:09.508Z,1478857869.508 [BPC1](ERROR): Data Fault
2016-11-11T09:51:09.516Z,1478857869.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:09.564Z,1478857869.564 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:51:09.899Z,1478857869.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:09.915Z,1478857869.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:10.300Z,1478857870.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:10.315Z,1478857870.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:10.700Z,1478857870.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:10.715Z,1478857870.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:10.734Z,1478857870.734 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:51:10.735Z,1478857870.735 [BPC1] No Fault, FailCount= 1
2016-11-11T09:51:11.101Z,1478857871.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:11.169Z,1478857871.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:11.501Z,1478857871.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:11.558Z,1478857871.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:11.900Z,1478857871.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:11.915Z,1478857871.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:12.293Z,1478857872.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:12.333Z,1478857872.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:12.693Z,1478857872.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:12.713Z,1478857872.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:13.093Z,1478857873.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:13.113Z,1478857873.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:13.493Z,1478857873.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:13.509Z,1478857873.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:13.893Z,1478857873.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:13.909Z,1478857873.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:14.301Z,1478857874.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:14.316Z,1478857874.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:14.735Z,1478857874.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:14.750Z,1478857874.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:15.101Z,1478857875.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:15.116Z,1478857875.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:15.496Z,1478857875.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:15.520Z,1478857875.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:15.900Z,1478857875.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:15.915Z,1478857875.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:16.300Z,1478857876.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:16.315Z,1478857876.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:16.700Z,1478857876.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:16.723Z,1478857876.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:17.093Z,1478857877.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:17.125Z,1478857877.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:17.493Z,1478857877.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:17.526Z,1478857877.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:17.904Z,1478857877.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:17.925Z,1478857877.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:18.293Z,1478857878.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:18.326Z,1478857878.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:18.693Z,1478857878.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:18.719Z,1478857878.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:19.093Z,1478857879.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:19.128Z,1478857879.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:19.493Z,1478857879.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:19.525Z,1478857879.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:19.897Z,1478857879.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:19.923Z,1478857879.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:20.293Z,1478857880.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:20.325Z,1478857880.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:20.693Z,1478857880.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:20.725Z,1478857880.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:21.097Z,1478857881.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:21.122Z,1478857881.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:21.493Z,1478857881.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:21.526Z,1478857881.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:21.901Z,1478857881.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:21.935Z,1478857881.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:22.301Z,1478857882.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:22.313Z,1478857882.313 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T09:51:22.313Z,1478857882.313 [BPC1] Data Fault, FailCount= 2
2016-11-11T09:51:22.313Z,1478857882.313 [BPC1](ERROR): Data Fault
2016-11-11T09:51:22.321Z,1478857882.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:22.382Z,1478857882.382 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:51:22.705Z,1478857882.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:22.725Z,1478857882.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:23.100Z,1478857883.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:23.115Z,1478857883.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:23.500Z,1478857883.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:23.515Z,1478857883.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:23.534Z,1478857883.534 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:51:23.534Z,1478857883.534 [BPC1] No Fault, FailCount= 2
2016-11-11T09:51:23.901Z,1478857883.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:24.020Z,1478857884.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:24.293Z,1478857884.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:24.345Z,1478857884.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:24.693Z,1478857884.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:24.736Z,1478857884.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:25.093Z,1478857885.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:25.129Z,1478857885.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:25.493Z,1478857885.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:25.513Z,1478857885.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:25.897Z,1478857885.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:25.917Z,1478857885.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:29.326Z,1478857889.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:29.351Z,1478857889.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:29.461Z,1478857889.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:29.498Z,1478857889.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:29.803Z,1478857889.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:29.829Z,1478857889.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:30.215Z,1478857890.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:30.231Z,1478857890.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:30.605Z,1478857890.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:30.630Z,1478857890.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:31.011Z,1478857891.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:31.026Z,1478857891.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:31.409Z,1478857891.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:31.436Z,1478857891.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:31.813Z,1478857891.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:31.833Z,1478857891.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:32.203Z,1478857892.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:32.235Z,1478857892.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:32.602Z,1478857892.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:32.637Z,1478857892.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:33.003Z,1478857893.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:33.034Z,1478857893.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:33.403Z,1478857893.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:33.437Z,1478857893.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:33.803Z,1478857893.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:33.837Z,1478857893.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:34.207Z,1478857894.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:34.233Z,1478857894.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:34.601Z,1478857894.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:34.661Z,1478857894.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:35.007Z,1478857895.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:35.037Z,1478857895.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:35.403Z,1478857895.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:35.431Z,1478857895.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:35.803Z,1478857895.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:35.848Z,1478857895.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:36.203Z,1478857896.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:36.218Z,1478857896.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:36.607Z,1478857896.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:36.656Z,1478857896.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:37.010Z,1478857897.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:37.025Z,1478857897.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:37.414Z,1478857897.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:37.462Z,1478857897.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:37.838Z,1478857897.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:37.881Z,1478857897.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:38.221Z,1478857898.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:38.252Z,1478857898.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:38.604Z,1478857898.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:38.637Z,1478857898.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:39.006Z,1478857899.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:39.037Z,1478857899.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:39.405Z,1478857899.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:39.439Z,1478857899.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:39.816Z,1478857899.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:39.837Z,1478857899.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:40.215Z,1478857900.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:40.237Z,1478857900.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:40.603Z,1478857900.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:40.633Z,1478857900.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:41.019Z,1478857901.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:41.034Z,1478857901.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:41.419Z,1478857901.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:41.435Z,1478857901.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:41.836Z,1478857901.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:41.875Z,1478857901.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:42.201Z,1478857902.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:42.221Z,1478857902.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:42.614Z,1478857902.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:42.641Z,1478857902.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:43.021Z,1478857903.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:43.057Z,1478857903.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:43.442Z,1478857903.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:43.481Z,1478857903.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:43.815Z,1478857903.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:43.831Z,1478857903.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:44.216Z,1478857904.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:44.231Z,1478857904.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:44.613Z,1478857904.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:44.629Z,1478857904.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:45.009Z,1478857905.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:45.029Z,1478857905.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:45.413Z,1478857905.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:45.428Z,1478857905.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:45.811Z,1478857905.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:45.833Z,1478857905.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:46.211Z,1478857906.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:46.233Z,1478857906.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:46.603Z,1478857906.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:46.641Z,1478857906.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:47.013Z,1478857907.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:47.028Z,1478857907.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:47.403Z,1478857907.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:47.433Z,1478857907.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:47.803Z,1478857907.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:47.835Z,1478857907.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:48.203Z,1478857908.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:48.237Z,1478857908.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:48.603Z,1478857908.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:48.677Z,1478857908.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:49.003Z,1478857909.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:49.019Z,1478857909.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:49.411Z,1478857909.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:49.442Z,1478857909.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:49.803Z,1478857909.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:49.825Z,1478857909.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:50.208Z,1478857910.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:50.265Z,1478857910.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:50.615Z,1478857910.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:50.630Z,1478857910.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:51.011Z,1478857911.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:51.062Z,1478857911.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:51.410Z,1478857911.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:51.429Z,1478857911.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:51.805Z,1478857911.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:51.855Z,1478857911.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:52.211Z,1478857912.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:52.247Z,1478857912.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:52.603Z,1478857912.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:52.653Z,1478857912.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:53.003Z,1478857913.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:53.019Z,1478857913.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:53.403Z,1478857913.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:53.419Z,1478857913.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:53.803Z,1478857913.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:53.825Z,1478857913.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:54.211Z,1478857914.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:54.227Z,1478857914.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:54.629Z,1478857914.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:54.657Z,1478857914.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:55.023Z,1478857915.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:55.038Z,1478857915.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:55.410Z,1478857915.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:55.426Z,1478857915.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:55.812Z,1478857915.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:55.828Z,1478857915.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:56.211Z,1478857916.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:56.233Z,1478857916.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:56.611Z,1478857916.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:56.635Z,1478857916.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:57.003Z,1478857917.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:57.031Z,1478857917.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:57.403Z,1478857917.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:57.437Z,1478857917.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:57.821Z,1478857917.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:57.841Z,1478857917.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:58.211Z,1478857918.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:58.237Z,1478857918.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:58.636Z,1478857918.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:58.685Z,1478857918.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:59.001Z,1478857919.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:59.041Z,1478857919.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:59.411Z,1478857919.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:59.442Z,1478857919.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:51:59.813Z,1478857919.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:51:59.846Z,1478857919.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:00.219Z,1478857920.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:00.254Z,1478857920.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:00.601Z,1478857920.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:00.635Z,1478857920.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:01.007Z,1478857921.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:01.023Z,1478857921.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:01.411Z,1478857921.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:01.435Z,1478857921.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:01.803Z,1478857921.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:01.818Z,1478857921.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:02.210Z,1478857922.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:02.253Z,1478857922.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:02.616Z,1478857922.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:02.631Z,1478857922.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:03.013Z,1478857923.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:03.036Z,1478857923.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:03.412Z,1478857923.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:03.473Z,1478857923.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:03.813Z,1478857923.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:03.834Z,1478857923.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:04.222Z,1478857924.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:04.238Z,1478857924.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:04.604Z,1478857924.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:04.661Z,1478857924.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:05.004Z,1478857925.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:05.036Z,1478857925.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:05.403Z,1478857925.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:05.453Z,1478857925.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:05.803Z,1478857925.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:05.842Z,1478857925.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:06.208Z,1478857926.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:06.257Z,1478857926.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:06.613Z,1478857926.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:06.661Z,1478857926.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:07.010Z,1478857927.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:07.030Z,1478857927.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:07.411Z,1478857927.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:07.426Z,1478857927.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:07.811Z,1478857927.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:07.826Z,1478857927.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:08.215Z,1478857928.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:08.253Z,1478857928.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:08.603Z,1478857928.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:08.625Z,1478857928.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:09.010Z,1478857929.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:09.026Z,1478857929.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:09.406Z,1478857929.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:09.437Z,1478857929.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:09.810Z,1478857929.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:09.825Z,1478857929.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:10.218Z,1478857930.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:10.237Z,1478857930.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:10.611Z,1478857930.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:10.626Z,1478857930.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:11.015Z,1478857931.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:11.030Z,1478857931.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:11.422Z,1478857931.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:11.453Z,1478857931.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:11.812Z,1478857931.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:11.845Z,1478857931.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:12.213Z,1478857932.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:12.245Z,1478857932.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:12.605Z,1478857932.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:12.632Z,1478857932.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:13.012Z,1478857933.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:13.045Z,1478857933.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:13.403Z,1478857933.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:13.433Z,1478857933.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:13.811Z,1478857933.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:13.826Z,1478857933.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:14.218Z,1478857934.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:14.248Z,1478857934.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:14.618Z,1478857934.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:14.637Z,1478857934.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:15.022Z,1478857935.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:15.049Z,1478857935.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:15.402Z,1478857935.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:15.428Z,1478857935.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:15.812Z,1478857935.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:15.845Z,1478857935.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:16.225Z,1478857936.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:16.241Z,1478857936.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:16.628Z,1478857936.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:16.661Z,1478857936.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:17.017Z,1478857937.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:17.065Z,1478857937.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:17.404Z,1478857937.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:17.436Z,1478857937.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:17.814Z,1478857937.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:17.837Z,1478857937.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:18.213Z,1478857938.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:18.233Z,1478857938.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:18.612Z,1478857938.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:18.631Z,1478857938.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:19.002Z,1478857939.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:19.062Z,1478857939.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:19.403Z,1478857939.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:19.418Z,1478857939.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:19.803Z,1478857939.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:19.825Z,1478857939.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:20.210Z,1478857940.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:20.251Z,1478857940.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:20.610Z,1478857940.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:20.625Z,1478857940.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:21.011Z,1478857941.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:21.061Z,1478857941.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:21.409Z,1478857941.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:21.452Z,1478857941.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:21.810Z,1478857941.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:21.825Z,1478857941.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:22.203Z,1478857942.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:22.239Z,1478857942.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:22.603Z,1478857942.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:22.638Z,1478857942.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:23.002Z,1478857943.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:23.037Z,1478857943.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:23.403Z,1478857943.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:23.438Z,1478857943.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:23.803Z,1478857943.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:23.837Z,1478857943.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:24.203Z,1478857944.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:24.237Z,1478857944.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:24.603Z,1478857944.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:24.631Z,1478857944.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:25.003Z,1478857945.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:25.041Z,1478857945.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:25.049Z,1478857945.049 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T09:52:25.050Z,1478857945.050 [Default:CheckIn:C.Wait] Stopped
2016-11-11T09:52:25.050Z,1478857945.050 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T09:52:25.050Z,1478857945.050 [Default:CheckIn:D] Running Loop=1
2016-11-11T09:52:25.403Z,1478857945.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:25.418Z,1478857945.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:25.453Z,1478857945.453 [Default:CheckIn:D] Stopped
2016-11-11T09:52:25.453Z,1478857945.453 [Default:CheckIn:E] Running Loop=1
2016-11-11T09:52:25.807Z,1478857945.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:25.823Z,1478857945.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:25.848Z,1478857945.848 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 302.402376 min 
2016-11-11T09:52:25.848Z,1478857945.848 [Default:CheckIn:E] Stopped
2016-11-11T09:52:25.849Z,1478857945.849 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T09:52:25.849Z,1478857945.849 [Default:CheckIn] Stopped
2016-11-11T09:52:25.849Z,1478857945.849 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T09:52:25.849Z,1478857945.849 [Default:CheckIn](INFO): Running loop #30
2016-11-11T09:52:25.849Z,1478857945.849 [Default:CheckIn] Running Loop=30
2016-11-11T09:52:25.849Z,1478857945.849 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T09:52:25.849Z,1478857945.849 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T09:52:26.216Z,1478857946.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:26.254Z,1478857946.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:29.750Z,1478857949.750 [NAL9602](INFO): Powering up
2016-11-11T09:52:29.767Z,1478857949.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:29.800Z,1478857949.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:29.897Z,1478857949.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:29.917Z,1478857949.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:30.268Z,1478857950.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:30.289Z,1478857950.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:30.661Z,1478857950.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:30.694Z,1478857950.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:31.063Z,1478857951.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:31.079Z,1478857951.079 [PNI_TCM](ERROR): CRC does not match. Expected:0x29655 got:0x64834
2016-11-11T09:52:31.105Z,1478857951.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:31.463Z,1478857951.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:31.496Z,1478857951.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:31.865Z,1478857951.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:31.983Z,1478857951.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:32.269Z,1478857952.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:32.287Z,1478857952.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:32.665Z,1478857952.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:32.701Z,1478857952.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:33.075Z,1478857953.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:33.113Z,1478857953.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:33.461Z,1478857953.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:33.525Z,1478857953.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:33.861Z,1478857953.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:33.938Z,1478857953.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:34.267Z,1478857954.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:34.291Z,1478857954.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:34.663Z,1478857954.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:34.717Z,1478857954.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:35.069Z,1478857955.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:35.109Z,1478857955.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:35.471Z,1478857955.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:35.525Z,1478857955.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:35.879Z,1478857955.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:35.933Z,1478857955.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:36.269Z,1478857956.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:36.315Z,1478857956.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:36.669Z,1478857956.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:36.684Z,1478857956.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:37.070Z,1478857957.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:37.086Z,1478857957.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:37.469Z,1478857957.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:37.502Z,1478857957.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:37.884Z,1478857957.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:37.940Z,1478857957.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:38.261Z,1478857958.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:38.276Z,1478857958.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:38.663Z,1478857958.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:38.708Z,1478857958.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:39.064Z,1478857959.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:39.079Z,1478857959.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:39.465Z,1478857959.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:39.480Z,1478857959.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:39.861Z,1478857959.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:39.889Z,1478857959.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:40.288Z,1478857960.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:40.320Z,1478857960.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:40.646Z,1478857960.646 [NAL9602](INFO): NAL9602 initialized
2016-11-11T09:52:40.671Z,1478857960.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:40.692Z,1478857960.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:41.069Z,1478857961.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:41.089Z,1478857961.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:41.445Z,1478857961.445 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T09:52:41.445Z,1478857961.445 [NAL9602] Data Fault, FailCount= 2
2016-11-11T09:52:41.445Z,1478857961.445 [NAL9602](ERROR): Data Fault
2016-11-11T09:52:41.462Z,1478857961.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:41.509Z,1478857961.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:41.554Z,1478857961.554 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T09:52:41.845Z,1478857961.845 [NAL9602](INFO): Powering down
2016-11-11T09:52:41.864Z,1478857961.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:41.898Z,1478857961.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:42.266Z,1478857962.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:42.291Z,1478857962.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:42.661Z,1478857962.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:42.701Z,1478857962.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:42.742Z,1478857962.742 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T09:52:42.742Z,1478857962.742 [NAL9602] No Fault, FailCount= 2
2016-11-11T09:52:43.067Z,1478857963.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:43.111Z,1478857963.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:43.468Z,1478857963.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:43.521Z,1478857963.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:43.868Z,1478857963.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:43.894Z,1478857963.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:44.268Z,1478857964.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:44.292Z,1478857964.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:44.661Z,1478857964.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:44.697Z,1478857964.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:45.074Z,1478857965.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:45.103Z,1478857965.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:45.475Z,1478857965.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:45.506Z,1478857965.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:45.917Z,1478857965.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:45.965Z,1478857965.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:46.263Z,1478857966.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:46.307Z,1478857966.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:46.675Z,1478857966.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:46.724Z,1478857966.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:47.045Z,1478857967.045 [NAL9602](INFO): Powering up NAL9602
2016-11-11T09:52:47.076Z,1478857967.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:47.153Z,1478857967.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:47.471Z,1478857967.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:47.491Z,1478857967.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:47.929Z,1478857967.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:47.989Z,1478857967.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:48.275Z,1478857968.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:48.343Z,1478857968.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:48.668Z,1478857968.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:48.726Z,1478857968.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:49.063Z,1478857969.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:49.095Z,1478857969.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:49.469Z,1478857969.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:49.514Z,1478857969.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:49.897Z,1478857969.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:49.970Z,1478857969.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:50.272Z,1478857970.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:50.355Z,1478857970.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:50.663Z,1478857970.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:50.715Z,1478857970.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:51.067Z,1478857971.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:51.122Z,1478857971.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:51.468Z,1478857971.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:51.517Z,1478857971.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:51.889Z,1478857971.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:51.964Z,1478857971.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:52.268Z,1478857972.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:52.283Z,1478857972.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:52.672Z,1478857972.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:52.688Z,1478857972.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:53.080Z,1478857973.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:53.104Z,1478857973.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:53.461Z,1478857973.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:53.493Z,1478857973.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:53.871Z,1478857973.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:53.887Z,1478857973.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:54.276Z,1478857974.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:54.322Z,1478857974.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:54.661Z,1478857974.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:54.693Z,1478857974.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:55.080Z,1478857975.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:55.129Z,1478857975.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:55.461Z,1478857975.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:55.497Z,1478857975.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:55.886Z,1478857975.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:55.901Z,1478857975.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:56.261Z,1478857976.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:56.356Z,1478857976.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:56.670Z,1478857976.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:56.733Z,1478857976.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:57.070Z,1478857977.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:57.097Z,1478857977.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:57.463Z,1478857977.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:57.504Z,1478857977.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:57.874Z,1478857977.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:57.911Z,1478857977.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:58.249Z,1478857978.249 [NAL9602](INFO): NAL9602 initialized
2016-11-11T09:52:58.268Z,1478857978.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:58.344Z,1478857978.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:58.662Z,1478857978.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:58.698Z,1478857978.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:59.090Z,1478857979.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:59.168Z,1478857979.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:59.490Z,1478857979.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:59.523Z,1478857979.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:52:59.881Z,1478857979.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:52:59.925Z,1478857979.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:00.263Z,1478857980.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:00.311Z,1478857980.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:00.671Z,1478857980.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:00.700Z,1478857980.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:01.086Z,1478857981.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:01.151Z,1478857981.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:01.485Z,1478857981.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:01.535Z,1478857981.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:01.885Z,1478857981.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:01.966Z,1478857981.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:02.270Z,1478857982.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:02.290Z,1478857982.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:02.676Z,1478857982.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:02.705Z,1478857982.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:03.072Z,1478857983.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:03.154Z,1478857983.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:03.463Z,1478857983.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:03.499Z,1478857983.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:03.871Z,1478857983.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:03.904Z,1478857983.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:04.271Z,1478857984.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:04.328Z,1478857984.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:04.667Z,1478857984.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:04.703Z,1478857984.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:05.063Z,1478857985.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:05.117Z,1478857985.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:05.486Z,1478857985.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:05.548Z,1478857985.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:05.889Z,1478857985.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:05.922Z,1478857985.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:06.262Z,1478857986.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:06.313Z,1478857986.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:06.663Z,1478857986.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:06.704Z,1478857986.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:07.089Z,1478857987.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:07.122Z,1478857987.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:07.472Z,1478857987.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:07.525Z,1478857987.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:07.861Z,1478857987.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:07.884Z,1478857987.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:08.274Z,1478857988.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:08.294Z,1478857988.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:08.661Z,1478857988.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:08.687Z,1478857988.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:09.061Z,1478857989.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:09.144Z,1478857989.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:09.465Z,1478857989.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:09.501Z,1478857989.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:09.861Z,1478857989.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:09.893Z,1478857989.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:10.261Z,1478857990.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:10.341Z,1478857990.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:10.669Z,1478857990.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:10.689Z,1478857990.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:11.070Z,1478857991.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:11.085Z,1478857991.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:11.468Z,1478857991.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:11.484Z,1478857991.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:11.873Z,1478857991.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:11.893Z,1478857991.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:12.280Z,1478857992.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:12.354Z,1478857992.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:12.669Z,1478857992.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:12.689Z,1478857992.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:13.061Z,1478857993.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:13.087Z,1478857993.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:13.469Z,1478857993.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:13.497Z,1478857993.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:13.875Z,1478857993.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:13.914Z,1478857993.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:14.261Z,1478857994.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:14.294Z,1478857994.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:14.670Z,1478857994.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:14.702Z,1478857994.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:15.061Z,1478857995.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:15.101Z,1478857995.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:15.469Z,1478857995.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:15.505Z,1478857995.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:15.877Z,1478857995.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:15.914Z,1478857995.914 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T09:53:15.914Z,1478857995.914 [BPC1] Data Fault, FailCount= 1
2016-11-11T09:53:15.914Z,1478857995.914 [BPC1](ERROR): Data Fault
2016-11-11T09:53:15.923Z,1478857995.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:15.971Z,1478857995.971 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T09:53:16.272Z,1478857996.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:16.301Z,1478857996.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:16.665Z,1478857996.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:16.697Z,1478857996.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:17.061Z,1478857997.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:17.097Z,1478857997.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:17.141Z,1478857997.141 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:53:17.141Z,1478857997.141 [BPC1] No Fault, FailCount= 1
2016-11-11T09:53:17.461Z,1478857997.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:17.545Z,1478857997.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:17.866Z,1478857997.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:17.950Z,1478857997.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:18.270Z,1478857998.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:18.305Z,1478857998.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:18.670Z,1478857998.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:18.703Z,1478857998.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:19.073Z,1478857999.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:19.103Z,1478857999.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:19.500Z,1478857999.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:19.516Z,1478857999.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:19.869Z,1478857999.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:19.897Z,1478857999.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:20.284Z,1478858000.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:20.362Z,1478858000.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:20.676Z,1478858000.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:20.697Z,1478858000.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:21.068Z,1478858001.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:21.086Z,1478858001.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:21.477Z,1478858001.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:21.497Z,1478858001.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:21.870Z,1478858001.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:21.885Z,1478858001.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:22.261Z,1478858002.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:22.298Z,1478858002.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:22.662Z,1478858002.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:22.688Z,1478858002.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:23.062Z,1478858003.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:23.093Z,1478858003.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:23.462Z,1478858003.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:23.489Z,1478858003.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:23.932Z,1478858003.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:23.947Z,1478858003.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:24.296Z,1478858004.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:24.350Z,1478858004.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:24.673Z,1478858004.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:24.704Z,1478858004.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:25.076Z,1478858005.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:25.108Z,1478858005.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:25.476Z,1478858005.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:25.508Z,1478858005.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:25.866Z,1478858005.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:25.889Z,1478858005.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:26.287Z,1478858006.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:26.336Z,1478858006.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:29.652Z,1478858009.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:29.707Z,1478858009.707 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:29.707Z,1478858009.707 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82
2016-11-11T09:53:29.708Z,1478858009.708 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:53:29.714Z,1478858009.714 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:29.714Z,1478858009.714 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 82
2016-11-11T09:53:29.714Z,1478858009.714 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:53:29.724Z,1478858009.724 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:29.724Z,1478858009.724 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 82
2016-11-11T09:53:29.725Z,1478858009.724 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:53:29.745Z,1478858009.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:53:29.745Z,1478858009.745 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:53:29.745Z,1478858009.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:53:29.852Z,1478858009.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:29.936Z,1478858009.936 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:53:29.936Z,1478858009.936 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82
2016-11-11T09:53:29.937Z,1478858009.937 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:53:29.937Z,1478858009.937 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 82
2016-11-11T09:53:29.937Z,1478858009.937 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:53:29.938Z,1478858009.938 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 82
2016-11-11T09:53:30.196Z,1478858010.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:30.220Z,1478858010.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:53:30.221Z,1478858010.221 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:53:30.221Z,1478858010.221 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:53:30.230Z,1478858010.230 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:53:30.230Z,1478858010.230 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:53:30.231Z,1478858010.231 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:53:30.235Z,1478858010.235 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:53:30.236Z,1478858010.236 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:53:30.236Z,1478858010.236 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:53:30.603Z,1478858010.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:30.625Z,1478858010.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:30.984Z,1478858010.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:31.008Z,1478858011.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:31.395Z,1478858011.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:31.410Z,1478858011.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:31.807Z,1478858011.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:31.842Z,1478858011.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:32.181Z,1478858012.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:32.206Z,1478858012.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:32.593Z,1478858012.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:32.615Z,1478858012.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:32.984Z,1478858012.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:33.004Z,1478858013.004 [BPC1](ERROR): Failed to receive battery data
2016-11-11T09:53:33.004Z,1478858013.004 [BPC1] Communications Fault, FailCount= 2
2016-11-11T09:53:33.004Z,1478858013.004 [BPC1](ERROR): Communications Fault
2016-11-11T09:53:33.012Z,1478858013.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:33.032Z,1478858013.032 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T09:53:33.382Z,1478858013.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:33.413Z,1478858013.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:33.805Z,1478858013.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:33.873Z,1478858013.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:34.188Z,1478858014.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:34.209Z,1478858014.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:34.253Z,1478858014.253 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:53:34.253Z,1478858014.253 [BPC1] No Fault, FailCount= 2
2016-11-11T09:53:34.596Z,1478858014.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:34.677Z,1478858014.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:34.000Z,1478858015.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:35.036Z,1478858015.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:35.396Z,1478858015.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:35.417Z,1478858015.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:35.794Z,1478858015.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:35.813Z,1478858015.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:36.184Z,1478858016.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:36.213Z,1478858016.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:36.590Z,1478858016.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:36.604Z,1478858016.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:36.992Z,1478858016.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:37.007Z,1478858017.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:37.148Z,1478858017.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:37.396Z,1478858017.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:37.412Z,1478858017.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:37.791Z,1478858017.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:37.813Z,1478858017.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:37.944Z,1478858017.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:38.181Z,1478858018.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:38.254Z,1478858018.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:38.589Z,1478858018.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:38.626Z,1478858018.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:38.982Z,1478858018.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:39.079Z,1478858019.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:39.382Z,1478858019.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:39.414Z,1478858019.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:39.796Z,1478858019.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:39.822Z,1478858019.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:40.192Z,1478858020.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:40.222Z,1478858020.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:40.596Z,1478858020.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:40.623Z,1478858020.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:40.992Z,1478858020.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:41.008Z,1478858021.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:41.389Z,1478858021.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:41.409Z,1478858021.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:41.806Z,1478858021.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:41.848Z,1478858021.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:42.185Z,1478858022.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:42.211Z,1478858022.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:42.581Z,1478858022.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:42.618Z,1478858022.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:42.981Z,1478858022.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:43.017Z,1478858023.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:43.385Z,1478858023.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:43.417Z,1478858023.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:43.819Z,1478858023.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:43.846Z,1478858023.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:44.181Z,1478858024.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:44.201Z,1478858024.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:44.585Z,1478858024.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:44.605Z,1478858024.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:44.996Z,1478858024.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:45.032Z,1478858025.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:45.400Z,1478858025.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:45.436Z,1478858025.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:45.824Z,1478858025.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:45.848Z,1478858025.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:46.195Z,1478858026.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:46.217Z,1478858026.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:46.586Z,1478858026.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:46.618Z,1478858026.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:46.989Z,1478858026.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:47.011Z,1478858027.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:47.389Z,1478858027.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:47.409Z,1478858027.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:47.812Z,1478858027.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:47.854Z,1478858027.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:48.185Z,1478858028.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:48.218Z,1478858028.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:48.581Z,1478858028.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:48.613Z,1478858028.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:48.981Z,1478858028.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:49.013Z,1478858029.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:49.385Z,1478858029.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:49.417Z,1478858029.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:49.808Z,1478858029.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:49.915Z,1478858029.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:50.192Z,1478858030.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:50.229Z,1478858030.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:50.589Z,1478858030.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:50.625Z,1478858030.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:50.981Z,1478858030.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:51.034Z,1478858031.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:51.140Z,1478858031.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:51.381Z,1478858031.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:51.401Z,1478858031.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:51.786Z,1478858031.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:51.843Z,1478858031.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:51.936Z,1478858031.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:52.189Z,1478858032.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:52.270Z,1478858032.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:52.584Z,1478858032.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:52.617Z,1478858032.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:52.996Z,1478858032.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:53.012Z,1478858033.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:53.382Z,1478858033.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:53.408Z,1478858033.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:53.782Z,1478858033.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:53.810Z,1478858033.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:54.200Z,1478858034.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:54.271Z,1478858034.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:54.592Z,1478858034.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:54.625Z,1478858034.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:54.997Z,1478858034.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:55.030Z,1478858035.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:55.392Z,1478858035.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:55.428Z,1478858035.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:55.817Z,1478858035.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:55.851Z,1478858035.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:56.182Z,1478858036.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:56.199Z,1478858036.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:56.589Z,1478858036.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:56.606Z,1478858036.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:56.988Z,1478858036.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:57.003Z,1478858037.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:57.384Z,1478858037.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:57.415Z,1478858037.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:57.807Z,1478858037.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:57.860Z,1478858037.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:58.192Z,1478858038.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:58.218Z,1478858038.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:58.581Z,1478858038.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:58.608Z,1478858038.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:59.003Z,1478858039.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:59.018Z,1478858039.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:59.403Z,1478858039.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:59.421Z,1478858039.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:53:59.796Z,1478858039.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:53:59.856Z,1478858039.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:00.181Z,1478858040.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:00.209Z,1478858040.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:00.581Z,1478858040.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:00.618Z,1478858040.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:00.981Z,1478858040.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:01.018Z,1478858041.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:01.381Z,1478858041.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:01.417Z,1478858041.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:01.804Z,1478858041.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:01.842Z,1478858041.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:02.185Z,1478858042.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:02.221Z,1478858042.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:02.611Z,1478858042.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:02.633Z,1478858042.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:02.992Z,1478858042.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:03.019Z,1478858043.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:03.396Z,1478858043.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:03.412Z,1478858043.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:03.794Z,1478858043.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:03.881Z,1478858043.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:04.193Z,1478858044.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:04.254Z,1478858044.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:04.581Z,1478858044.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:04.613Z,1478858044.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:04.985Z,1478858044.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:05.034Z,1478858045.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:05.382Z,1478858045.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:05.407Z,1478858045.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:05.781Z,1478858045.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:05.834Z,1478858045.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:06.181Z,1478858046.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:06.261Z,1478858046.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:06.581Z,1478858046.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:06.629Z,1478858046.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:06.993Z,1478858046.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:07.013Z,1478858047.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:07.384Z,1478858047.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:07.412Z,1478858047.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:07.796Z,1478858047.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:07.825Z,1478858047.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:08.231Z,1478858048.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:08.265Z,1478858048.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:08.595Z,1478858048.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:08.630Z,1478858048.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:08.996Z,1478858048.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:09.032Z,1478858049.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:09.381Z,1478858049.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:09.401Z,1478858049.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:09.790Z,1478858049.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:09.834Z,1478858049.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:10.189Z,1478858050.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:10.204Z,1478858050.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:10.585Z,1478858050.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:10.600Z,1478858050.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:10.987Z,1478858050.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:11.006Z,1478858051.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:11.389Z,1478858051.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:11.405Z,1478858051.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:11.791Z,1478858051.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:11.858Z,1478858051.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:12.197Z,1478858052.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:12.217Z,1478858052.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:12.581Z,1478858052.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:12.618Z,1478858052.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:13.003Z,1478858053.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:13.019Z,1478858053.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:13.403Z,1478858053.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:13.418Z,1478858053.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:13.810Z,1478858053.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:13.829Z,1478858053.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:14.192Z,1478858054.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:14.229Z,1478858054.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:14.581Z,1478858054.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:14.596Z,1478858054.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:14.982Z,1478858054.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:15.013Z,1478858055.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:15.389Z,1478858055.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:15.405Z,1478858055.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:15.794Z,1478858055.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:15.815Z,1478858055.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:16.184Z,1478858056.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:16.217Z,1478858056.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:16.586Z,1478858056.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:16.613Z,1478858056.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:16.988Z,1478858056.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:17.003Z,1478858057.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:17.382Z,1478858057.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:17.413Z,1478858057.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:17.781Z,1478858057.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:17.901Z,1478858057.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:18.212Z,1478858058.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:18.232Z,1478858058.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:18.596Z,1478858058.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:18.649Z,1478858058.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:18.996Z,1478858058.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:19.012Z,1478858059.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:19.393Z,1478858059.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:19.445Z,1478858059.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:19.817Z,1478858059.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:19.866Z,1478858059.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:20.229Z,1478858060.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:20.297Z,1478858060.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:20.592Z,1478858060.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:20.613Z,1478858060.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:20.982Z,1478858060.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:21.047Z,1478858061.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:21.381Z,1478858061.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:21.413Z,1478858061.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:21.781Z,1478858061.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:21.816Z,1478858061.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:22.234Z,1478858062.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:22.280Z,1478858062.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:22.581Z,1478858062.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:22.616Z,1478858062.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:22.997Z,1478858062.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:23.025Z,1478858063.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:23.404Z,1478858063.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:23.420Z,1478858063.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:23.804Z,1478858063.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:23.836Z,1478858063.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:24.200Z,1478858064.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:24.231Z,1478858064.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:24.600Z,1478858064.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:24.628Z,1478858064.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:24.986Z,1478858064.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:25.020Z,1478858065.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:25.381Z,1478858065.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:25.417Z,1478858065.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:25.788Z,1478858065.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:25.828Z,1478858065.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:26.182Z,1478858066.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:26.221Z,1478858066.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:26.582Z,1478858066.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:26.601Z,1478858066.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:30.116Z,1478858070.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:30.131Z,1478858070.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:30.260Z,1478858070.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:30.293Z,1478858070.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:30.619Z,1478858070.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:30.635Z,1478858070.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:31.023Z,1478858071.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:31.039Z,1478858071.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:31.398Z,1478858071.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:31.437Z,1478858071.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:31.841Z,1478858071.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:31.899Z,1478858071.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:32.205Z,1478858072.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:32.225Z,1478858072.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:32.599Z,1478858072.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:32.650Z,1478858072.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:32.998Z,1478858072.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:33.068Z,1478858073.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:33.398Z,1478858073.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:33.434Z,1478858073.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:33.798Z,1478858073.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:33.853Z,1478858073.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:34.207Z,1478858074.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:34.238Z,1478858074.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:34.598Z,1478858074.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:34.638Z,1478858074.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:35.013Z,1478858075.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:35.061Z,1478858075.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:35.412Z,1478858075.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:35.444Z,1478858075.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:35.812Z,1478858075.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:35.853Z,1478858075.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:36.254Z,1478858076.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:36.276Z,1478858076.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:36.600Z,1478858076.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:36.631Z,1478858076.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:37.005Z,1478858077.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:37.021Z,1478858077.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:37.400Z,1478858077.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:37.428Z,1478858077.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:37.805Z,1478858077.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:37.825Z,1478858077.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:38.208Z,1478858078.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:38.229Z,1478858078.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:38.597Z,1478858078.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:38.629Z,1478858078.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:38.997Z,1478858078.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:39.037Z,1478858079.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:39.397Z,1478858079.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:39.428Z,1478858079.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:39.812Z,1478858079.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:39.837Z,1478858079.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:40.225Z,1478858080.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:40.246Z,1478858080.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:40.612Z,1478858080.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:40.638Z,1478858080.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:41.013Z,1478858081.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:41.048Z,1478858081.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:41.408Z,1478858081.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:41.441Z,1478858081.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:41.827Z,1478858081.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:41.843Z,1478858081.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:42.197Z,1478858082.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:42.217Z,1478858082.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:42.601Z,1478858082.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:42.621Z,1478858082.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:43.010Z,1478858083.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:43.026Z,1478858083.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:43.404Z,1478858083.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:43.420Z,1478858083.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:43.812Z,1478858083.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:43.835Z,1478858083.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:44.197Z,1478858084.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:44.229Z,1478858084.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:44.601Z,1478858084.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:44.633Z,1478858084.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:44.997Z,1478858084.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:45.029Z,1478858085.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:45.421Z,1478858085.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:45.441Z,1478858085.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:45.826Z,1478858085.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:45.866Z,1478858085.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:46.212Z,1478858086.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:46.238Z,1478858086.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:46.612Z,1478858086.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:46.641Z,1478858086.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:47.001Z,1478858087.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:47.065Z,1478858087.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:47.401Z,1478858087.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:47.421Z,1478858087.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:47.804Z,1478858087.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:47.819Z,1478858087.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:48.204Z,1478858088.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:48.269Z,1478858088.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:48.604Z,1478858088.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:48.619Z,1478858088.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:49.006Z,1478858089.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:49.061Z,1478858089.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:49.404Z,1478858089.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:49.461Z,1478858089.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:49.804Z,1478858089.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:49.819Z,1478858089.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:50.226Z,1478858090.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:50.261Z,1478858090.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:50.614Z,1478858090.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:50.630Z,1478858090.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:51.013Z,1478858091.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:51.037Z,1478858091.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:51.420Z,1478858091.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:51.448Z,1478858091.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:51.808Z,1478858091.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:51.841Z,1478858091.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:52.201Z,1478858092.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:52.233Z,1478858092.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:52.597Z,1478858092.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:52.634Z,1478858092.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:52.997Z,1478858092.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:53.017Z,1478858093.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:53.400Z,1478858093.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:53.415Z,1478858093.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:53.809Z,1478858093.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:53.845Z,1478858093.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:54.203Z,1478858094.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:54.219Z,1478858094.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:54.603Z,1478858094.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:54.625Z,1478858094.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:55.009Z,1478858095.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:55.063Z,1478858095.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:55.404Z,1478858095.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:55.425Z,1478858095.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:55.820Z,1478858095.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:55.835Z,1478858095.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:56.223Z,1478858096.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:56.238Z,1478858096.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:56.616Z,1478858096.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:56.644Z,1478858096.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:57.008Z,1478858097.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:57.041Z,1478858097.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:57.398Z,1478858097.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:57.437Z,1478858097.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:57.802Z,1478858097.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:57.829Z,1478858097.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:58.201Z,1478858098.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:58.237Z,1478858098.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:58.607Z,1478858098.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:58.623Z,1478858098.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:59.005Z,1478858099.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:59.025Z,1478858099.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:59.403Z,1478858099.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:59.425Z,1478858099.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:54:59.815Z,1478858099.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:54:59.835Z,1478858099.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:00.206Z,1478858100.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:00.222Z,1478858100.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:00.597Z,1478858100.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:00.622Z,1478858100.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:01.020Z,1478858101.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:01.038Z,1478858101.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:01.412Z,1478858101.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:01.485Z,1478858101.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:01.811Z,1478858101.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:01.846Z,1478858101.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:02.212Z,1478858102.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:02.261Z,1478858102.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:02.601Z,1478858102.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:02.637Z,1478858102.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:03.001Z,1478858103.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:03.057Z,1478858103.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:03.402Z,1478858103.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:03.457Z,1478858103.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:03.800Z,1478858103.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:03.815Z,1478858103.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:04.206Z,1478858104.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:04.233Z,1478858104.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:04.606Z,1478858104.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:04.621Z,1478858104.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:05.004Z,1478858105.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:05.020Z,1478858105.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:05.405Z,1478858105.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:05.421Z,1478858105.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:05.813Z,1478858105.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:05.833Z,1478858105.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:06.214Z,1478858106.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:06.233Z,1478858106.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:06.615Z,1478858106.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:06.630Z,1478858106.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:07.019Z,1478858107.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:07.047Z,1478858107.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:07.419Z,1478858107.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:07.435Z,1478858107.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:07.805Z,1478858107.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:07.831Z,1478858107.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:08.202Z,1478858108.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:08.237Z,1478858108.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:08.597Z,1478858108.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:08.633Z,1478858108.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:09.002Z,1478858109.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:09.046Z,1478858109.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:09.401Z,1478858109.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:09.421Z,1478858109.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:09.809Z,1478858109.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:09.850Z,1478858109.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:10.202Z,1478858110.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:10.229Z,1478858110.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:10.610Z,1478858110.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:10.626Z,1478858110.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:11.007Z,1478858111.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:11.028Z,1478858111.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:11.416Z,1478858111.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:11.477Z,1478858111.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:11.820Z,1478858111.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:11.836Z,1478858111.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:12.219Z,1478858112.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:12.235Z,1478858112.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:12.617Z,1478858112.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:12.637Z,1478858112.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:12.997Z,1478858112.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:13.030Z,1478858113.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:13.397Z,1478858113.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:13.437Z,1478858113.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:13.809Z,1478858113.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:13.854Z,1478858113.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:14.202Z,1478858114.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:14.244Z,1478858114.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:14.598Z,1478858114.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:14.626Z,1478858114.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:14.998Z,1478858114.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:15.014Z,1478858115.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:15.405Z,1478858115.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:15.477Z,1478858115.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:15.800Z,1478858115.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:15.832Z,1478858115.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:16.212Z,1478858116.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:16.261Z,1478858116.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:16.616Z,1478858116.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:16.631Z,1478858116.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:17.010Z,1478858117.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:17.058Z,1478858117.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:17.416Z,1478858117.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:17.462Z,1478858117.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:17.819Z,1478858117.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:17.841Z,1478858117.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:18.220Z,1478858118.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:18.236Z,1478858118.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:18.609Z,1478858118.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:18.629Z,1478858118.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:19.001Z,1478858119.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:19.027Z,1478858119.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:19.397Z,1478858119.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:19.433Z,1478858119.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:19.797Z,1478858119.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:19.829Z,1478858119.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:20.202Z,1478858120.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:20.228Z,1478858120.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:20.597Z,1478858120.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:20.629Z,1478858120.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:21.004Z,1478858121.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:21.025Z,1478858121.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:21.402Z,1478858121.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:21.417Z,1478858121.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:21.820Z,1478858121.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:21.835Z,1478858121.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:22.215Z,1478858122.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:22.230Z,1478858122.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:22.620Z,1478858122.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:22.635Z,1478858122.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:23.012Z,1478858123.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:23.043Z,1478858123.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:23.397Z,1478858123.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:23.433Z,1478858123.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:23.806Z,1478858123.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:23.832Z,1478858123.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:24.201Z,1478858124.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:24.227Z,1478858124.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:24.601Z,1478858124.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:24.633Z,1478858124.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:25.002Z,1478858125.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:25.028Z,1478858125.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:25.397Z,1478858125.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:25.429Z,1478858125.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:25.805Z,1478858125.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:25.831Z,1478858125.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:26.197Z,1478858126.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:26.234Z,1478858126.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:26.598Z,1478858126.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:26.626Z,1478858126.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:30.230Z,1478858130.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:30.294Z,1478858130.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:30.409Z,1478858130.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:30.428Z,1478858130.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:30.780Z,1478858130.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:30.797Z,1478858130.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:31.176Z,1478858131.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:31.237Z,1478858131.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:31.564Z,1478858131.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:31.597Z,1478858131.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:31.957Z,1478858131.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:31.966Z,1478858131.966 [PNI_TCM](ERROR): CRC does not match. Expected:0x63626 got:0x6335
2016-11-11T09:55:32.022Z,1478858132.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:32.359Z,1478858132.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:32.366Z,1478858132.366 [PNI_TCM](ERROR): CRC does not match. Expected:0x23246 got:0x7490
2016-11-11T09:55:32.421Z,1478858132.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:32.757Z,1478858132.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:32.795Z,1478858132.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:33.157Z,1478858133.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:33.195Z,1478858133.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:33.558Z,1478858133.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:33.632Z,1478858133.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:33.959Z,1478858133.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:33.988Z,1478858133.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:34.365Z,1478858134.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:34.401Z,1478858134.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:34.764Z,1478858134.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:34.795Z,1478858134.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:35.173Z,1478858135.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:35.204Z,1478858135.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:35.568Z,1478858135.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:35.629Z,1478858135.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:35.977Z,1478858135.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:36.002Z,1478858136.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:36.373Z,1478858136.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:36.396Z,1478858136.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:36.767Z,1478858136.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:36.782Z,1478858136.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:37.160Z,1478858137.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:37.194Z,1478858137.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:37.557Z,1478858137.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:37.648Z,1478858137.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:37.957Z,1478858137.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:37.992Z,1478858137.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:38.360Z,1478858138.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:38.366Z,1478858138.366 [PNI_TCM](ERROR): CRC does not match. Expected:0x61385 got:0x44060
2016-11-11T09:55:38.398Z,1478858138.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:38.760Z,1478858138.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:38.796Z,1478858138.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:39.157Z,1478858139.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:39.197Z,1478858139.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:39.558Z,1478858139.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:39.632Z,1478858139.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:39.968Z,1478858139.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:39.996Z,1478858139.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:40.374Z,1478858140.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:40.390Z,1478858140.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:40.781Z,1478858140.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:40.801Z,1478858140.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:41.175Z,1478858141.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:41.208Z,1478858141.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:41.572Z,1478858141.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:41.595Z,1478858141.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:41.959Z,1478858141.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:41.990Z,1478858141.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:42.361Z,1478858142.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:42.393Z,1478858142.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:42.759Z,1478858142.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:42.786Z,1478858142.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:42.936Z,1478858142.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:43.164Z,1478858143.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:43.191Z,1478858143.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:43.558Z,1478858143.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:43.594Z,1478858143.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:43.732Z,1478858143.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:43.967Z,1478858143.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:43.994Z,1478858143.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:44.368Z,1478858144.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:44.436Z,1478858144.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:44.764Z,1478858144.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:44.825Z,1478858144.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:45.157Z,1478858145.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:45.193Z,1478858145.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:45.582Z,1478858145.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:45.598Z,1478858145.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:45.976Z,1478858145.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:46.062Z,1478858146.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:46.379Z,1478858146.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:46.403Z,1478858146.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:46.775Z,1478858146.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:46.822Z,1478858146.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:47.167Z,1478858147.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:47.183Z,1478858147.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:47.600Z,1478858147.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:47.671Z,1478858147.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:47.959Z,1478858147.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:47.989Z,1478858147.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:48.368Z,1478858148.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:48.384Z,1478858148.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:48.766Z,1478858148.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:48.790Z,1478858148.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:49.169Z,1478858149.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:49.184Z,1478858149.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:49.585Z,1478858149.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:49.636Z,1478858149.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:49.961Z,1478858149.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:49.998Z,1478858149.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:50.360Z,1478858150.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:50.387Z,1478858150.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:50.785Z,1478858150.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:50.817Z,1478858150.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:51.176Z,1478858151.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:51.205Z,1478858151.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:51.604Z,1478858151.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:51.654Z,1478858151.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:51.973Z,1478858151.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:52.009Z,1478858152.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:52.364Z,1478858152.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:52.392Z,1478858152.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:52.764Z,1478858152.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:52.779Z,1478858152.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:53.161Z,1478858153.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:53.184Z,1478858153.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:53.217Z,1478858153.217 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T09:55:53.616Z,1478858153.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:53.647Z,1478858153.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:53.967Z,1478858153.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:53.982Z,1478858153.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:54.368Z,1478858154.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:54.384Z,1478858154.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:54.765Z,1478858154.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:54.787Z,1478858154.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:55.160Z,1478858155.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:55.194Z,1478858155.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:55.569Z,1478858155.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:55.589Z,1478858155.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:55.972Z,1478858155.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:56.000Z,1478858156.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:56.371Z,1478858156.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:56.406Z,1478858156.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:56.776Z,1478858156.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:56.809Z,1478858156.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:56.924Z,1478858156.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:57.172Z,1478858157.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:57.199Z,1478858157.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:57.557Z,1478858157.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:57.577Z,1478858157.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:57.720Z,1478858157.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:57.961Z,1478858157.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:57.985Z,1478858157.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:58.373Z,1478858158.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:58.388Z,1478858158.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:58.761Z,1478858158.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:58.788Z,1478858158.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:59.162Z,1478858159.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:59.194Z,1478858159.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:59.557Z,1478858159.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:55:59.609Z,1478858159.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:55:59.959Z,1478858159.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:00.053Z,1478858160.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:00.369Z,1478858160.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:00.389Z,1478858160.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:00.772Z,1478858160.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:00.787Z,1478858160.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:01.179Z,1478858161.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:01.229Z,1478858161.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:01.602Z,1478858161.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:01.646Z,1478858161.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:01.982Z,1478858161.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:02.028Z,1478858162.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:02.375Z,1478858162.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:02.423Z,1478858162.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:02.757Z,1478858162.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:02.789Z,1478858162.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:03.158Z,1478858163.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:03.193Z,1478858163.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:03.584Z,1478858163.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:03.649Z,1478858163.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:03.961Z,1478858163.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:03.993Z,1478858163.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:04.365Z,1478858164.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:04.392Z,1478858164.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:04.757Z,1478858164.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:04.795Z,1478858164.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:05.157Z,1478858165.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:05.194Z,1478858165.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:05.570Z,1478858165.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:05.640Z,1478858165.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:05.958Z,1478858165.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:05.974Z,1478858165.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:06.372Z,1478858166.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:06.409Z,1478858166.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:06.768Z,1478858166.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:06.797Z,1478858166.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:07.168Z,1478858167.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:07.183Z,1478858167.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:07.587Z,1478858167.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:07.624Z,1478858167.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:07.966Z,1478858167.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:07.988Z,1478858167.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:08.357Z,1478858168.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:08.395Z,1478858168.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:08.757Z,1478858168.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:08.786Z,1478858168.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:09.161Z,1478858169.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:09.194Z,1478858169.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:09.576Z,1478858169.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:09.612Z,1478858169.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:09.980Z,1478858169.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:10.005Z,1478858170.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:10.364Z,1478858170.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:10.385Z,1478858170.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:10.765Z,1478858170.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:10.785Z,1478858170.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:10.916Z,1478858170.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:11.160Z,1478858171.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:11.194Z,1478858171.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:11.560Z,1478858171.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:11.582Z,1478858171.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:11.712Z,1478858171.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:11.966Z,1478858171.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:12.041Z,1478858172.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:12.357Z,1478858172.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:12.394Z,1478858172.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:12.761Z,1478858172.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:12.794Z,1478858172.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:13.158Z,1478858173.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:13.173Z,1478858173.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:13.557Z,1478858173.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:13.605Z,1478858173.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:13.961Z,1478858173.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:14.026Z,1478858174.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:14.365Z,1478858174.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:14.409Z,1478858174.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:14.757Z,1478858174.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:14.817Z,1478858174.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:15.184Z,1478858175.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:15.201Z,1478858175.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:15.586Z,1478858175.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:15.649Z,1478858175.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:15.965Z,1478858175.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:15.980Z,1478858175.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:16.365Z,1478858176.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:16.416Z,1478858176.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:16.769Z,1478858176.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:16.826Z,1478858176.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:17.157Z,1478858177.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:17.189Z,1478858177.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:17.584Z,1478858177.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:17.629Z,1478858177.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:17.957Z,1478858177.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:17.997Z,1478858177.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:18.361Z,1478858178.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:18.393Z,1478858178.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:18.762Z,1478858178.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:18.839Z,1478858178.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:19.171Z,1478858179.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:19.206Z,1478858179.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:19.594Z,1478858179.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:19.621Z,1478858179.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:19.961Z,1478858179.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:19.977Z,1478858179.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:20.362Z,1478858180.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:20.389Z,1478858180.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:20.760Z,1478858180.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:20.792Z,1478858180.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:21.169Z,1478858181.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:21.184Z,1478858181.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:21.568Z,1478858181.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:21.632Z,1478858181.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:21.957Z,1478858181.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:21.989Z,1478858181.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:22.361Z,1478858182.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:22.398Z,1478858182.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:22.757Z,1478858182.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:22.794Z,1478858182.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:23.157Z,1478858183.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:23.193Z,1478858183.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:23.583Z,1478858183.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:23.598Z,1478858183.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:23.980Z,1478858183.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:24.006Z,1478858184.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:24.365Z,1478858184.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:24.380Z,1478858184.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:24.765Z,1478858184.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:24.785Z,1478858184.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:25.164Z,1478858185.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:25.185Z,1478858185.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:25.560Z,1478858185.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:25.593Z,1478858185.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:25.974Z,1478858185.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:26.048Z,1478858186.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:26.358Z,1478858186.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:26.393Z,1478858186.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:26.757Z,1478858186.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:26.789Z,1478858186.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:30.203Z,1478858190.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:30.290Z,1478858190.290 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:30.290Z,1478858190.290 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83
2016-11-11T09:56:30.290Z,1478858190.290 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:56:30.307Z,1478858190.307 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:30.307Z,1478858190.307 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 83
2016-11-11T09:56:30.307Z,1478858190.307 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:56:30.309Z,1478858190.309 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:30.309Z,1478858190.309 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 83
2016-11-11T09:56:30.309Z,1478858190.309 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:56:30.335Z,1478858190.335 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:56:30.335Z,1478858190.335 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:56:30.336Z,1478858190.336 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:56:30.381Z,1478858190.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:30.438Z,1478858190.438 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:56:30.438Z,1478858190.438 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83
2016-11-11T09:56:30.438Z,1478858190.438 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:56:30.438Z,1478858190.438 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 83
2016-11-11T09:56:30.443Z,1478858190.443 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:56:30.444Z,1478858190.444 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 83
2016-11-11T09:56:30.778Z,1478858190.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:30.792Z,1478858190.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:56:30.793Z,1478858190.793 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:56:30.793Z,1478858190.793 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:56:30.798Z,1478858190.798 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:56:30.798Z,1478858190.798 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:56:30.799Z,1478858190.799 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:56:30.799Z,1478858190.799 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:56:30.800Z,1478858190.800 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:56:30.800Z,1478858190.800 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:56:31.186Z,1478858191.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:31.238Z,1478858191.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:31.589Z,1478858191.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:31.606Z,1478858191.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:31.984Z,1478858191.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:32.036Z,1478858192.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:32.391Z,1478858192.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:32.436Z,1478858192.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:32.797Z,1478858192.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:32.812Z,1478858192.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:33.193Z,1478858193.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:33.213Z,1478858193.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:33.600Z,1478858193.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:33.615Z,1478858193.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:33.978Z,1478858193.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:34.014Z,1478858194.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:34.381Z,1478858194.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:34.413Z,1478858194.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:34.778Z,1478858194.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:34.815Z,1478858194.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:35.177Z,1478858195.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:35.205Z,1478858195.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:35.584Z,1478858195.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:35.618Z,1478858195.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:35.978Z,1478858195.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:36.015Z,1478858196.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:36.400Z,1478858196.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:36.420Z,1478858196.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:36.800Z,1478858196.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:36.820Z,1478858196.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:37.177Z,1478858197.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:37.214Z,1478858197.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:37.578Z,1478858197.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:37.653Z,1478858197.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:37.977Z,1478858197.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:37.997Z,1478858197.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:38.381Z,1478858198.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:38.401Z,1478858198.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:38.781Z,1478858198.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:38.796Z,1478858198.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:39.182Z,1478858199.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:39.213Z,1478858199.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:39.580Z,1478858199.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:39.604Z,1478858199.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:39.996Z,1478858199.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:40.042Z,1478858200.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:40.381Z,1478858200.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:40.403Z,1478858200.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:40.799Z,1478858200.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:40.821Z,1478858200.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:41.196Z,1478858201.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:41.224Z,1478858201.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:41.577Z,1478858201.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:41.613Z,1478858201.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:42.010Z,1478858202.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:42.059Z,1478858202.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:42.377Z,1478858202.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:42.413Z,1478858202.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:42.784Z,1478858202.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:42.811Z,1478858202.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:43.178Z,1478858203.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:43.213Z,1478858203.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:43.585Z,1478858203.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:43.615Z,1478858203.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:43.977Z,1478858203.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:44.030Z,1478858204.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:44.378Z,1478858204.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:44.429Z,1478858204.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:44.780Z,1478858204.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:44.817Z,1478858204.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:45.196Z,1478858205.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:45.249Z,1478858205.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:45.597Z,1478858205.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:45.617Z,1478858205.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:45.978Z,1478858205.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:46.052Z,1478858206.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:46.378Z,1478858206.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:46.429Z,1478858206.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:46.778Z,1478858206.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:46.814Z,1478858206.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:47.177Z,1478858207.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:47.217Z,1478858207.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:47.581Z,1478858207.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:47.618Z,1478858207.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:47.977Z,1478858207.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:48.016Z,1478858208.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:48.377Z,1478858208.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:48.417Z,1478858208.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:48.777Z,1478858208.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:48.813Z,1478858208.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:49.184Z,1478858209.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:49.217Z,1478858209.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:49.605Z,1478858209.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:49.627Z,1478858209.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:49.985Z,1478858209.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:50.021Z,1478858210.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:50.381Z,1478858210.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:50.401Z,1478858210.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:50.785Z,1478858210.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:50.801Z,1478858210.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:51.183Z,1478858211.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:51.205Z,1478858211.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:51.626Z,1478858211.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:51.671Z,1478858211.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:51.977Z,1478858211.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:51.997Z,1478858211.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:52.382Z,1478858212.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:52.397Z,1478858212.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:52.785Z,1478858212.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:52.800Z,1478858212.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:53.181Z,1478858213.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:53.204Z,1478858213.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:53.589Z,1478858213.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:53.609Z,1478858213.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:53.996Z,1478858213.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:54.017Z,1478858214.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:54.388Z,1478858214.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:54.423Z,1478858214.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:54.781Z,1478858214.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:54.817Z,1478858214.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:55.177Z,1478858215.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:55.213Z,1478858215.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:55.585Z,1478858215.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:55.616Z,1478858215.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:55.996Z,1478858215.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:56.036Z,1478858216.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:56.380Z,1478858216.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:56.401Z,1478858216.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:56.789Z,1478858216.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:56.804Z,1478858216.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:57.184Z,1478858217.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:57.205Z,1478858217.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:57.577Z,1478858217.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:57.612Z,1478858217.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:57.977Z,1478858217.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:58.012Z,1478858218.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:58.388Z,1478858218.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:58.461Z,1478858218.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:58.777Z,1478858218.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:58.812Z,1478858218.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:59.177Z,1478858219.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:59.233Z,1478858219.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:59.593Z,1478858219.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:56:59.613Z,1478858219.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:56:59.977Z,1478858219.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:00.029Z,1478858220.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:00.377Z,1478858220.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:00.429Z,1478858220.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:00.777Z,1478858220.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:00.820Z,1478858220.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:01.177Z,1478858221.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:01.217Z,1478858221.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:01.596Z,1478858221.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:01.621Z,1478858221.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:01.989Z,1478858221.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:02.021Z,1478858222.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:02.391Z,1478858222.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:02.407Z,1478858222.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:02.788Z,1478858222.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:02.804Z,1478858222.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:03.184Z,1478858223.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:03.199Z,1478858223.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:03.589Z,1478858223.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:03.609Z,1478858223.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:03.984Z,1478858223.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:03.000Z,1478858224.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:04.384Z,1478858224.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:04.399Z,1478858224.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:04.785Z,1478858224.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:04.805Z,1478858224.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:05.180Z,1478858225.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:05.203Z,1478858225.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:05.612Z,1478858225.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:05.660Z,1478858225.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:05.977Z,1478858225.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:06.013Z,1478858226.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:06.377Z,1478858226.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:06.409Z,1478858226.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:06.799Z,1478858226.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:06.814Z,1478858226.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:07.203Z,1478858227.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:07.218Z,1478858227.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:07.577Z,1478858227.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:07.609Z,1478858227.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:07.980Z,1478858227.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:08.017Z,1478858228.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:08.386Z,1478858228.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:08.413Z,1478858228.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:08.781Z,1478858228.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:08.808Z,1478858228.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:09.177Z,1478858229.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:09.210Z,1478858229.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:09.578Z,1478858229.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:09.613Z,1478858229.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:09.979Z,1478858229.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:10.030Z,1478858230.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:10.377Z,1478858230.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:10.397Z,1478858230.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:10.778Z,1478858230.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:10.793Z,1478858230.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:11.192Z,1478858231.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:11.225Z,1478858231.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:11.595Z,1478858231.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:11.611Z,1478858231.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:11.985Z,1478858231.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:12.008Z,1478858232.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:12.380Z,1478858232.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:12.434Z,1478858232.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:12.777Z,1478858232.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:12.837Z,1478858232.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:13.177Z,1478858233.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:13.197Z,1478858233.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:13.589Z,1478858233.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:13.645Z,1478858233.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:13.985Z,1478858233.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:14.005Z,1478858234.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:14.382Z,1478858234.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:14.433Z,1478858234.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:14.780Z,1478858234.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:14.829Z,1478858234.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:15.183Z,1478858235.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:15.205Z,1478858235.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:15.600Z,1478858235.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:15.632Z,1478858235.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:15.988Z,1478858235.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:16.004Z,1478858236.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:16.380Z,1478858236.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:16.409Z,1478858236.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:16.780Z,1478858236.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:16.808Z,1478858236.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:17.180Z,1478858237.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:17.212Z,1478858237.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:17.585Z,1478858237.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:17.605Z,1478858237.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:17.978Z,1478858237.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:18.009Z,1478858238.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:18.377Z,1478858238.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:18.409Z,1478858238.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:18.777Z,1478858238.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:18.813Z,1478858238.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:19.178Z,1478858239.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:19.218Z,1478858239.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:19.589Z,1478858239.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:19.633Z,1478858239.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:19.986Z,1478858239.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:20.009Z,1478858240.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:20.388Z,1478858240.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:20.404Z,1478858240.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:20.780Z,1478858240.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:20.810Z,1478858240.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:21.191Z,1478858241.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:21.207Z,1478858241.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:21.594Z,1478858241.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:21.609Z,1478858241.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:21.979Z,1478858241.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:22.023Z,1478858242.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:22.377Z,1478858242.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:22.403Z,1478858242.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:22.794Z,1478858242.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:22.810Z,1478858242.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:23.177Z,1478858243.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:23.209Z,1478858243.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:23.577Z,1478858243.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:23.605Z,1478858243.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:23.992Z,1478858243.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:24.038Z,1478858244.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:24.392Z,1478858244.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:24.414Z,1478858244.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:24.783Z,1478858244.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:24.813Z,1478858244.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:25.187Z,1478858245.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:25.214Z,1478858245.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:25.585Z,1478858245.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:25.600Z,1478858245.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:25.980Z,1478858245.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:26.006Z,1478858246.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:26.023Z,1478858246.023 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T09:52:25.8Z
2016-11-11T09:57:26.023Z,1478858246.023 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T09:57:26.024Z,1478858246.024 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T09:57:26.377Z,1478858246.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:26.414Z,1478858246.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:27.213Z,1478858247.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:27.285Z,1478858247.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:30.544Z,1478858250.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:30.583Z,1478858250.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:30.648Z,1478858250.648 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0120.lzma
2016-11-11T09:57:30.689Z,1478858250.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:30.705Z,1478858250.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:31.041Z,1478858251.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:31.061Z,1478858251.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:31.428Z,1478858251.428 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0120.lzma.bak
2016-11-11T09:57:31.429Z,1478858251.429 [DataOverHttps](INFO): SBD MOMSN=4555298
2016-11-11T09:57:31.490Z,1478858251.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:31.561Z,1478858251.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:32.693Z,1478858252.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:32.709Z,1478858252.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:32.814Z,1478858252.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:32.873Z,1478858252.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:36.276Z,1478858256.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:36.348Z,1478858256.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:36.433Z,1478858256.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:36.465Z,1478858256.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:36.820Z,1478858256.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:36.836Z,1478858256.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:37.220Z,1478858257.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:37.241Z,1478858257.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:37.605Z,1478858257.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:37.627Z,1478858257.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:38.005Z,1478858258.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:38.025Z,1478858258.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:41.537Z,1478858261.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:41.557Z,1478858261.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:57.106Z,1478858277.106 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0121.lzma
2016-11-11T09:57:57.147Z,1478858277.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:57.158Z,1478858277.158 [BPC1](ERROR): Failed to receive battery data
2016-11-11T09:57:57.159Z,1478858277.158 [BPC1] Communications Fault, FailCount= 1
2016-11-11T09:57:57.159Z,1478858277.158 [BPC1](ERROR): Communications Fault
2016-11-11T09:57:57.186Z,1478858277.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:57.244Z,1478858277.244 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T09:57:57.318Z,1478858277.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:57.374Z,1478858277.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:57:57.960Z,1478858277.960 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0121.lzma.bak
2016-11-11T09:57:57.960Z,1478858277.960 [DataOverHttps](INFO): SBD MOMSN=4555300
2016-11-11T09:57:58.006Z,1478858278.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:57:58.046Z,1478858278.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:01.244Z,1478858281.244 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T09:58:01.263Z,1478858281.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:01.312Z,1478858281.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:01.344Z,1478858281.344 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T09:58:01.344Z,1478858281.344 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T09:58:01.344Z,1478858281.344 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T09:58:01.384Z,1478858281.384 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T09:58:01.384Z,1478858281.384 [BPC1] No Fault, FailCount= 1
2016-11-11T09:58:01.453Z,1478858281.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:01.637Z,1478858281.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:07.050Z,1478858287.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:07.106Z,1478858287.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:07.203Z,1478858287.203 [NAL9602](INFO): Powering down
2016-11-11T09:58:07.245Z,1478858287.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:07.362Z,1478858287.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:07.641Z,1478858287.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:07.663Z,1478858287.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:08.025Z,1478858288.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:08.052Z,1478858288.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:08.418Z,1478858288.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:08.449Z,1478858288.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:08.818Z,1478858288.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:08.870Z,1478858288.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:09.225Z,1478858289.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:09.245Z,1478858289.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:09.645Z,1478858289.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:09.678Z,1478858289.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:10.017Z,1478858290.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:10.049Z,1478858290.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:10.417Z,1478858290.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:10.452Z,1478858290.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:10.826Z,1478858290.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:10.859Z,1478858290.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:11.226Z,1478858291.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:11.246Z,1478858291.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:11.619Z,1478858291.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:11.665Z,1478858291.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:12.019Z,1478858292.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:12.122Z,1478858292.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:12.419Z,1478858292.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:12.466Z,1478858292.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:12.819Z,1478858292.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:12.858Z,1478858292.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:13.219Z,1478858293.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:13.259Z,1478858293.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:13.626Z,1478858293.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:13.646Z,1478858293.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:14.019Z,1478858294.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:14.057Z,1478858294.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:14.426Z,1478858294.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:14.450Z,1478858294.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:14.819Z,1478858294.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:14.860Z,1478858294.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:15.219Z,1478858295.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:15.265Z,1478858295.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:15.623Z,1478858295.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:15.659Z,1478858295.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:16.031Z,1478858296.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:16.112Z,1478858296.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:16.419Z,1478858296.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:16.444Z,1478858296.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:16.708Z,1478858296.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:16.819Z,1478858296.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:16.839Z,1478858296.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:17.226Z,1478858297.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:17.249Z,1478858297.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:17.504Z,1478858297.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:17.627Z,1478858297.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:17.658Z,1478858297.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:18.027Z,1478858298.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:18.052Z,1478858298.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:18.419Z,1478858298.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:18.465Z,1478858298.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:18.819Z,1478858298.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:18.865Z,1478858298.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:19.219Z,1478858299.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:19.307Z,1478858299.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:19.626Z,1478858299.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:19.653Z,1478858299.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:20.026Z,1478858300.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:20.057Z,1478858300.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:20.427Z,1478858300.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:20.491Z,1478858300.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:20.830Z,1478858300.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:20.857Z,1478858300.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:21.219Z,1478858301.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:21.292Z,1478858301.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:21.619Z,1478858301.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:21.692Z,1478858301.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:22.023Z,1478858302.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:22.066Z,1478858302.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:22.431Z,1478858302.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:22.477Z,1478858302.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:22.820Z,1478858302.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:22.836Z,1478858302.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:23.223Z,1478858303.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:23.245Z,1478858303.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:23.629Z,1478858303.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:23.644Z,1478858303.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:24.024Z,1478858304.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:24.040Z,1478858304.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:24.423Z,1478858304.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:24.445Z,1478858304.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:24.824Z,1478858304.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:24.839Z,1478858304.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:25.225Z,1478858305.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:25.241Z,1478858305.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:25.625Z,1478858305.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:25.659Z,1478858305.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:26.021Z,1478858306.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:26.046Z,1478858306.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:26.417Z,1478858306.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:26.440Z,1478858306.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:26.817Z,1478858306.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:26.832Z,1478858306.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:27.228Z,1478858307.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:27.249Z,1478858307.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:27.617Z,1478858307.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:27.641Z,1478858307.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:28.024Z,1478858308.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:28.039Z,1478858308.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:28.428Z,1478858308.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:28.443Z,1478858308.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:28.828Z,1478858308.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:28.844Z,1478858308.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:29.217Z,1478858309.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:29.249Z,1478858309.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:29.625Z,1478858309.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:29.651Z,1478858309.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:30.017Z,1478858310.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:30.057Z,1478858310.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:30.423Z,1478858310.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:30.445Z,1478858310.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:30.656Z,1478858310.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:30.820Z,1478858310.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:30.850Z,1478858310.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:31.224Z,1478858311.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:31.240Z,1478858311.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:31.452Z,1478858311.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:31.617Z,1478858311.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:31.656Z,1478858311.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:32.037Z,1478858312.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:32.086Z,1478858312.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:32.424Z,1478858312.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:32.440Z,1478858312.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:32.824Z,1478858312.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:32.839Z,1478858312.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:33.219Z,1478858313.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:33.251Z,1478858313.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:33.624Z,1478858313.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:33.694Z,1478858313.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:34.023Z,1478858314.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:34.043Z,1478858314.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:34.424Z,1478858314.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:34.449Z,1478858314.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:34.817Z,1478858314.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:34.893Z,1478858314.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:35.217Z,1478858315.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:35.242Z,1478858315.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:35.629Z,1478858315.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:35.677Z,1478858315.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:36.021Z,1478858316.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:36.078Z,1478858316.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:36.420Z,1478858316.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:36.467Z,1478858316.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:36.818Z,1478858316.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:36.879Z,1478858316.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:37.220Z,1478858317.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:37.236Z,1478858317.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:37.625Z,1478858317.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:37.652Z,1478858317.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:38.024Z,1478858318.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:38.040Z,1478858318.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:38.417Z,1478858318.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:38.449Z,1478858318.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:38.817Z,1478858318.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:38.852Z,1478858318.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:39.221Z,1478858319.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:39.254Z,1478858319.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:39.625Z,1478858319.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:39.641Z,1478858319.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:40.023Z,1478858320.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:40.045Z,1478858320.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:40.424Z,1478858320.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:40.439Z,1478858320.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:40.824Z,1478858320.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:40.843Z,1478858320.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:41.224Z,1478858321.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:41.245Z,1478858321.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:41.625Z,1478858321.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:41.660Z,1478858321.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:42.017Z,1478858322.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:42.069Z,1478858322.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:42.417Z,1478858322.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:42.457Z,1478858322.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:42.821Z,1478858322.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:42.853Z,1478858322.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:43.217Z,1478858323.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:43.237Z,1478858323.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:43.634Z,1478858323.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:43.653Z,1478858323.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:44.034Z,1478858324.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:44.052Z,1478858324.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:44.428Z,1478858324.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:44.463Z,1478858324.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:44.636Z,1478858324.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:44.817Z,1478858324.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:44.854Z,1478858324.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:45.218Z,1478858325.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:45.254Z,1478858325.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:45.433Z,1478858325.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:45.625Z,1478858325.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:45.661Z,1478858325.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:46.031Z,1478858326.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:46.072Z,1478858326.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:46.421Z,1478858326.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:46.561Z,1478858326.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:46.825Z,1478858326.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:46.844Z,1478858326.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:47.224Z,1478858327.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:47.249Z,1478858327.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:47.617Z,1478858327.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:47.653Z,1478858327.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:48.017Z,1478858328.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:48.073Z,1478858328.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:48.433Z,1478858328.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:48.457Z,1478858328.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:48.817Z,1478858328.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:48.885Z,1478858328.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:49.217Z,1478858329.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:49.302Z,1478858329.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:49.617Z,1478858329.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:49.658Z,1478858329.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:50.017Z,1478858330.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:50.059Z,1478858330.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:50.417Z,1478858330.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:50.454Z,1478858330.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:50.817Z,1478858330.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:50.844Z,1478858330.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:51.217Z,1478858331.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:51.237Z,1478858331.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:51.689Z,1478858331.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:51.705Z,1478858331.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:52.017Z,1478858332.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:52.053Z,1478858332.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:52.417Z,1478858332.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:52.442Z,1478858332.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:52.817Z,1478858332.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:52.850Z,1478858332.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:53.217Z,1478858333.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:53.306Z,1478858333.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:53.618Z,1478858333.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:53.653Z,1478858333.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:54.017Z,1478858334.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:54.056Z,1478858334.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:54.417Z,1478858334.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:54.452Z,1478858334.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:54.817Z,1478858334.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:54.848Z,1478858334.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:55.223Z,1478858335.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:55.238Z,1478858335.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:55.624Z,1478858335.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:55.664Z,1478858335.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:56.018Z,1478858336.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:56.046Z,1478858336.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:56.430Z,1478858336.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:56.446Z,1478858336.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:56.831Z,1478858336.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:56.847Z,1478858336.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:57.232Z,1478858337.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:57.265Z,1478858337.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:57.624Z,1478858337.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:57.633Z,1478858337.633 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T09:58:57.661Z,1478858337.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:58.017Z,1478858338.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:58.037Z,1478858338.037 [PNI_TCM](ERROR): CRC does not match. Expected:0x43435 got:0x51996
2016-11-11T09:58:58.065Z,1478858338.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:58.418Z,1478858338.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:58.453Z,1478858338.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:58.821Z,1478858338.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:58.865Z,1478858338.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:59.217Z,1478858339.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:59.250Z,1478858339.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:58:59.618Z,1478858339.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:58:59.664Z,1478858339.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:00.027Z,1478858340.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:00.043Z,1478858340.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:00.421Z,1478858340.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:00.492Z,1478858340.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:00.825Z,1478858340.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:00.834Z,1478858340.834 [PNI_TCM](ERROR): CRC does not match. Expected:0x33429 got:0x6336
2016-11-11T09:59:00.900Z,1478858340.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:01.227Z,1478858341.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:01.243Z,1478858341.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:01.626Z,1478858341.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:01.641Z,1478858341.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:02.022Z,1478858342.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:02.064Z,1478858342.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:05.582Z,1478858345.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:05.637Z,1478858345.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:05.733Z,1478858345.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:05.756Z,1478858345.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:06.133Z,1478858346.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:06.153Z,1478858346.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:06.529Z,1478858346.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:06.581Z,1478858346.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:06.952Z,1478858346.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:06.991Z,1478858346.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:07.332Z,1478858347.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:07.393Z,1478858347.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:07.733Z,1478858347.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:07.788Z,1478858347.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:08.132Z,1478858348.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:08.147Z,1478858348.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:08.537Z,1478858348.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:08.552Z,1478858348.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:08.931Z,1478858348.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:08.961Z,1478858348.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:09.332Z,1478858349.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:09.347Z,1478858349.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:09.736Z,1478858349.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:09.756Z,1478858349.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:10.125Z,1478858350.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:10.153Z,1478858350.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:10.525Z,1478858350.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:10.567Z,1478858350.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:10.925Z,1478858350.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:10.957Z,1478858350.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:11.330Z,1478858351.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:11.408Z,1478858351.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:11.725Z,1478858351.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:11.745Z,1478858351.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:12.129Z,1478858352.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:12.149Z,1478858352.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:12.533Z,1478858352.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:12.548Z,1478858352.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:12.932Z,1478858352.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:12.947Z,1478858352.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:13.331Z,1478858353.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:13.353Z,1478858353.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:13.750Z,1478858353.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:13.782Z,1478858353.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:14.132Z,1478858354.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:14.147Z,1478858354.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:14.532Z,1478858354.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:14.556Z,1478858354.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:14.932Z,1478858354.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:14.954Z,1478858354.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:15.336Z,1478858355.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:15.351Z,1478858355.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:15.750Z,1478858355.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:15.803Z,1478858355.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:16.148Z,1478858356.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:16.173Z,1478858356.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:16.533Z,1478858356.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:16.574Z,1478858356.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:16.929Z,1478858356.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:16.944Z,1478858356.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:17.333Z,1478858357.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:17.349Z,1478858357.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:17.733Z,1478858357.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:17.749Z,1478858357.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:18.133Z,1478858358.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:18.153Z,1478858358.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:18.538Z,1478858358.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:18.554Z,1478858358.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:18.933Z,1478858358.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:18.993Z,1478858358.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:19.325Z,1478858359.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:19.357Z,1478858359.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:19.725Z,1478858359.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:19.745Z,1478858359.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:20.131Z,1478858360.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:20.185Z,1478858360.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:20.532Z,1478858360.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:20.560Z,1478858360.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:20.951Z,1478858360.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:20.975Z,1478858360.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:21.328Z,1478858361.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:21.385Z,1478858361.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:21.725Z,1478858361.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:21.761Z,1478858361.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:22.125Z,1478858362.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:22.173Z,1478858362.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:22.525Z,1478858362.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:22.561Z,1478858362.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:22.924Z,1478858362.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:22.977Z,1478858362.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:23.333Z,1478858363.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:23.363Z,1478858363.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:23.725Z,1478858363.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:23.768Z,1478858363.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:24.125Z,1478858364.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:24.161Z,1478858364.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:24.533Z,1478858364.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:24.556Z,1478858364.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:24.925Z,1478858364.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:24.945Z,1478858364.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:25.355Z,1478858365.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:25.399Z,1478858365.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:25.732Z,1478858365.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:25.748Z,1478858365.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:26.132Z,1478858366.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:26.147Z,1478858366.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:26.537Z,1478858366.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:26.552Z,1478858366.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:26.933Z,1478858366.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:26.948Z,1478858366.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:27.333Z,1478858367.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:27.353Z,1478858367.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:27.738Z,1478858367.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:27.786Z,1478858367.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:28.125Z,1478858368.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:28.161Z,1478858368.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:28.525Z,1478858368.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:28.561Z,1478858368.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:28.925Z,1478858368.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:28.962Z,1478858368.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:29.325Z,1478858369.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:29.361Z,1478858369.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:29.731Z,1478858369.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:29.774Z,1478858369.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:30.129Z,1478858370.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:30.169Z,1478858370.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:30.525Z,1478858370.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:30.540Z,1478858370.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:30.937Z,1478858370.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:30.952Z,1478858370.952 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:30.952Z,1478858370.952 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84
2016-11-11T09:59:30.952Z,1478858370.953 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T09:59:30.967Z,1478858370.967 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:30.968Z,1478858370.968 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 84
2016-11-11T09:59:30.968Z,1478858370.968 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T09:59:30.970Z,1478858370.970 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:30.970Z,1478858370.970 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 84
2016-11-11T09:59:30.970Z,1478858370.970 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T09:59:30.997Z,1478858370.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T09:59:30.997Z,1478858370.997 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T09:59:30.997Z,1478858370.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T09:59:31.340Z,1478858371.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:31.389Z,1478858371.389 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T09:59:31.389Z,1478858371.389 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84
2016-11-11T09:59:31.389Z,1478858371.389 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T09:59:31.389Z,1478858371.389 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 84
2016-11-11T09:59:31.390Z,1478858371.390 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T09:59:31.390Z,1478858371.390 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 84
2016-11-11T09:59:31.739Z,1478858371.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:31.757Z,1478858371.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T09:59:31.757Z,1478858371.757 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:59:31.758Z,1478858371.758 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:59:31.762Z,1478858371.762 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T09:59:31.763Z,1478858371.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:59:31.763Z,1478858371.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:59:31.764Z,1478858371.764 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T09:59:31.764Z,1478858371.764 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T09:59:31.765Z,1478858371.765 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T09:59:32.145Z,1478858372.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:32.161Z,1478858372.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:32.545Z,1478858372.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:32.564Z,1478858372.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:32.925Z,1478858372.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:32.961Z,1478858372.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:33.335Z,1478858373.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:33.359Z,1478858373.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:33.733Z,1478858373.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:33.785Z,1478858373.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:34.133Z,1478858374.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:34.165Z,1478858374.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:34.529Z,1478858374.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:34.557Z,1478858374.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:34.937Z,1478858374.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:35.002Z,1478858375.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:35.325Z,1478858375.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:35.352Z,1478858375.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:35.729Z,1478858375.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:35.765Z,1478858375.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:36.145Z,1478858376.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:36.217Z,1478858376.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:36.526Z,1478858376.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:36.557Z,1478858376.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:36.926Z,1478858376.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:36.966Z,1478858376.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:37.326Z,1478858377.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:37.381Z,1478858377.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:37.725Z,1478858377.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:37.762Z,1478858377.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:38.136Z,1478858378.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:38.173Z,1478858378.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:38.525Z,1478858378.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:38.541Z,1478858378.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:38.925Z,1478858378.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:38.946Z,1478858378.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:39.345Z,1478858379.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:39.387Z,1478858379.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:39.733Z,1478858379.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:39.749Z,1478858379.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:40.133Z,1478858380.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:40.148Z,1478858380.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:40.531Z,1478858380.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:40.553Z,1478858380.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:40.931Z,1478858380.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:40.947Z,1478858380.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:41.332Z,1478858381.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:41.348Z,1478858381.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:41.734Z,1478858381.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:41.770Z,1478858381.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:42.125Z,1478858382.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:42.150Z,1478858382.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:42.536Z,1478858382.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:42.559Z,1478858382.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:42.925Z,1478858382.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:42.958Z,1478858382.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:43.325Z,1478858383.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:43.348Z,1478858383.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:43.727Z,1478858383.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:43.744Z,1478858383.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:44.133Z,1478858384.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:44.176Z,1478858384.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:44.530Z,1478858384.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:44.549Z,1478858384.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:44.933Z,1478858384.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:44.953Z,1478858384.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:45.332Z,1478858385.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:45.353Z,1478858385.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:45.732Z,1478858385.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:45.748Z,1478858385.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:46.132Z,1478858386.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:46.152Z,1478858386.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:46.532Z,1478858386.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:46.553Z,1478858386.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:46.925Z,1478858386.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:46.971Z,1478858386.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:47.333Z,1478858387.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:47.359Z,1478858387.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:47.725Z,1478858387.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:47.777Z,1478858387.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:48.125Z,1478858388.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:48.169Z,1478858388.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:48.525Z,1478858388.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:48.540Z,1478858388.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:48.925Z,1478858388.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:48.945Z,1478858388.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:49.325Z,1478858389.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:49.381Z,1478858389.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:49.725Z,1478858389.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:49.749Z,1478858389.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:50.132Z,1478858390.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:50.182Z,1478858390.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:50.532Z,1478858390.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:50.553Z,1478858390.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:50.934Z,1478858390.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:50.990Z,1478858390.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:51.341Z,1478858391.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:51.397Z,1478858391.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:51.733Z,1478858391.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:51.753Z,1478858391.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:52.132Z,1478858392.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:52.148Z,1478858392.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:52.536Z,1478858392.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:52.552Z,1478858392.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:52.925Z,1478858392.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:52.973Z,1478858392.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:53.365Z,1478858393.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:53.436Z,1478858393.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:53.725Z,1478858393.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:53.740Z,1478858393.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:54.125Z,1478858394.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:54.140Z,1478858394.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:54.529Z,1478858394.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:54.545Z,1478858394.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:54.946Z,1478858394.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:54.993Z,1478858394.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:55.331Z,1478858395.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:55.347Z,1478858395.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:55.739Z,1478858395.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:55.754Z,1478858395.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:56.137Z,1478858396.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:56.157Z,1478858396.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:56.533Z,1478858396.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:56.553Z,1478858396.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:56.934Z,1478858396.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:56.951Z,1478858396.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:57.333Z,1478858397.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:57.353Z,1478858397.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:57.737Z,1478858397.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:57.758Z,1478858397.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:58.141Z,1478858398.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:58.156Z,1478858398.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:58.529Z,1478858398.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:58.561Z,1478858398.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:58.925Z,1478858398.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:58.951Z,1478858398.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:59.342Z,1478858399.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:59.357Z,1478858399.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T09:59:59.725Z,1478858399.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T09:59:59.761Z,1478858399.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:00.125Z,1478858400.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:00.157Z,1478858400.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:00.525Z,1478858400.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:00.561Z,1478858400.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:00.925Z,1478858400.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:00.961Z,1478858400.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:01.333Z,1478858401.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:01.359Z,1478858401.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:01.733Z,1478858401.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:01.759Z,1478858401.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:02.126Z,1478858402.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:02.173Z,1478858402.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:05.539Z,1478858405.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:05.589Z,1478858405.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:05.711Z,1478858405.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:05.738Z,1478858405.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:06.120Z,1478858406.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:06.178Z,1478858406.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:06.508Z,1478858406.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:06.540Z,1478858406.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:06.897Z,1478858406.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:06.945Z,1478858406.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:07.305Z,1478858407.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:07.364Z,1478858407.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:07.704Z,1478858407.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:07.720Z,1478858407.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:08.104Z,1478858408.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:08.119Z,1478858408.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:08.503Z,1478858408.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:08.518Z,1478858408.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:08.897Z,1478858408.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:08.921Z,1478858408.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:09.299Z,1478858409.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:09.334Z,1478858409.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:09.701Z,1478858409.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:09.743Z,1478858409.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:10.120Z,1478858410.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:10.142Z,1478858410.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:10.494Z,1478858410.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:10.509Z,1478858410.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:10.904Z,1478858410.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:10.950Z,1478858410.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:11.308Z,1478858411.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:11.336Z,1478858411.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:11.726Z,1478858411.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:11.746Z,1478858411.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:12.097Z,1478858412.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:12.132Z,1478858412.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:12.491Z,1478858412.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:12.516Z,1478858412.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:12.895Z,1478858412.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:12.923Z,1478858412.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:13.291Z,1478858413.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:13.307Z,1478858413.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:13.697Z,1478858413.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:13.714Z,1478858413.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:14.097Z,1478858414.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:14.125Z,1478858414.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:14.499Z,1478858414.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:14.522Z,1478858414.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:14.893Z,1478858414.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:14.916Z,1478858414.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:15.307Z,1478858415.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:15.323Z,1478858415.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:15.691Z,1478858415.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:15.725Z,1478858415.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:16.091Z,1478858416.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:16.117Z,1478858416.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:16.491Z,1478858416.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:16.523Z,1478858416.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:16.891Z,1478858416.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:16.925Z,1478858416.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:17.304Z,1478858417.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:17.336Z,1478858417.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:17.691Z,1478858417.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:17.745Z,1478858417.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:18.091Z,1478858418.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:18.137Z,1478858418.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:18.491Z,1478858418.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:18.507Z,1478858418.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:18.895Z,1478858418.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:18.910Z,1478858418.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:19.303Z,1478858419.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:19.349Z,1478858419.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:19.697Z,1478858419.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:19.717Z,1478858419.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:20.097Z,1478858420.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:20.117Z,1478858420.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:20.498Z,1478858420.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:20.553Z,1478858420.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:20.898Z,1478858420.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:20.921Z,1478858420.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:21.311Z,1478858421.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:21.369Z,1478858421.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:21.699Z,1478858421.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:21.749Z,1478858421.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:22.099Z,1478858422.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:22.114Z,1478858422.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:22.497Z,1478858422.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:22.522Z,1478858422.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:22.916Z,1478858422.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:22.962Z,1478858422.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:23.305Z,1478858423.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:23.336Z,1478858423.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:23.701Z,1478858423.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:23.717Z,1478858423.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:24.101Z,1478858424.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:24.121Z,1478858424.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:24.502Z,1478858424.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:24.521Z,1478858424.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:24.898Z,1478858424.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:24.918Z,1478858424.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:25.298Z,1478858425.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:25.317Z,1478858425.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:25.721Z,1478858425.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:25.758Z,1478858425.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:26.108Z,1478858426.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:26.135Z,1478858426.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:26.527Z,1478858426.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:26.570Z,1478858426.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:26.890Z,1478858426.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:26.928Z,1478858426.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:27.298Z,1478858427.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:27.325Z,1478858427.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:27.717Z,1478858427.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:27.733Z,1478858427.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:28.124Z,1478858428.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:28.166Z,1478858428.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:28.496Z,1478858428.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:28.532Z,1478858428.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:28.895Z,1478858428.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:28.910Z,1478858428.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:29.303Z,1478858429.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:29.339Z,1478858429.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:29.698Z,1478858429.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:29.714Z,1478858429.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:30.097Z,1478858430.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:30.112Z,1478858430.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:30.498Z,1478858430.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:30.521Z,1478858430.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:30.895Z,1478858430.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:30.918Z,1478858430.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:31.306Z,1478858431.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:31.322Z,1478858431.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:31.703Z,1478858431.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:31.718Z,1478858431.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:32.098Z,1478858432.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:32.157Z,1478858432.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:32.491Z,1478858432.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:32.522Z,1478858432.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:32.902Z,1478858432.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:32.925Z,1478858432.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:33.307Z,1478858433.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:33.322Z,1478858433.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:33.691Z,1478858433.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:33.725Z,1478858433.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:34.091Z,1478858434.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:34.142Z,1478858434.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:34.495Z,1478858434.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:34.531Z,1478858434.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:34.891Z,1478858434.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:34.949Z,1478858434.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:35.294Z,1478858435.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:35.330Z,1478858435.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:35.695Z,1478858435.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:35.749Z,1478858435.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:36.094Z,1478858436.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:36.109Z,1478858436.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:36.496Z,1478858436.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:36.546Z,1478858436.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:36.899Z,1478858436.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:36.915Z,1478858436.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:37.299Z,1478858437.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:37.315Z,1478858437.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:37.697Z,1478858437.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:37.723Z,1478858437.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:38.101Z,1478858438.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:38.125Z,1478858438.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:38.491Z,1478858438.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:38.517Z,1478858438.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:38.902Z,1478858438.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:38.925Z,1478858438.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:39.315Z,1478858439.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:39.359Z,1478858439.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:39.715Z,1478858439.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:39.734Z,1478858439.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:40.097Z,1478858440.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:40.132Z,1478858440.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:40.497Z,1478858440.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:40.529Z,1478858440.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:40.901Z,1478858440.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:40.934Z,1478858440.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:41.291Z,1478858441.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:41.329Z,1478858441.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:41.691Z,1478858441.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:41.721Z,1478858441.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:42.110Z,1478858442.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:42.146Z,1478858442.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:42.499Z,1478858442.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:42.533Z,1478858442.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:42.912Z,1478858442.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:42.969Z,1478858442.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:43.302Z,1478858443.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:43.333Z,1478858443.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:43.703Z,1478858443.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:43.718Z,1478858443.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:44.110Z,1478858444.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:44.144Z,1478858444.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:44.532Z,1478858444.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:44.558Z,1478858444.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:44.895Z,1478858444.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:44.918Z,1478858444.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:45.308Z,1478858445.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:45.323Z,1478858445.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:45.696Z,1478858445.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:45.728Z,1478858445.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:46.091Z,1478858446.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:46.131Z,1478858446.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:46.494Z,1478858446.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:46.530Z,1478858446.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:46.891Z,1478858446.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:46.926Z,1478858446.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:47.292Z,1478858447.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:47.327Z,1478858447.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:47.692Z,1478858447.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:47.724Z,1478858447.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:48.094Z,1478858448.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:48.110Z,1478858448.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:48.494Z,1478858448.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:48.510Z,1478858448.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:48.894Z,1478858448.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:48.910Z,1478858448.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:49.304Z,1478858449.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:49.321Z,1478858449.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:49.698Z,1478858449.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:49.718Z,1478858449.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:50.099Z,1478858450.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:50.114Z,1478858450.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:50.432Z,1478858450.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:50.502Z,1478858450.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:50.517Z,1478858450.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:50.891Z,1478858450.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:50.926Z,1478858450.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:51.228Z,1478858451.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:51.291Z,1478858451.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:51.327Z,1478858451.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:51.699Z,1478858451.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:51.718Z,1478858451.718 [BPC1](ERROR): Failed to receive battery data
2016-11-11T10:00:51.718Z,1478858451.718 [BPC1] Communications Fault, FailCount= 1
2016-11-11T10:00:51.718Z,1478858451.718 [BPC1](ERROR): Communications Fault
2016-11-11T10:00:51.726Z,1478858451.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:51.748Z,1478858451.748 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T10:00:52.091Z,1478858452.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:52.125Z,1478858452.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:52.499Z,1478858452.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:52.531Z,1478858452.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:52.891Z,1478858452.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:52.907Z,1478858452.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:52.960Z,1478858452.960 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:00:52.960Z,1478858452.960 [BPC1] No Fault, FailCount= 1
2016-11-11T10:00:53.297Z,1478858453.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:53.366Z,1478858453.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:53.696Z,1478858453.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:53.721Z,1478858453.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:54.101Z,1478858454.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:54.117Z,1478858454.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:54.498Z,1478858454.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:54.517Z,1478858454.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:54.898Z,1478858454.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:54.914Z,1478858454.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:55.309Z,1478858455.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:55.335Z,1478858455.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:55.707Z,1478858455.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:55.773Z,1478858455.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:56.096Z,1478858456.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:56.132Z,1478858456.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:56.494Z,1478858456.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:56.520Z,1478858456.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:56.893Z,1478858456.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:56.949Z,1478858456.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:57.304Z,1478858457.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:57.328Z,1478858457.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:57.704Z,1478858457.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:57.728Z,1478858457.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:58.091Z,1478858458.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:58.126Z,1478858458.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:58.491Z,1478858458.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:58.518Z,1478858458.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:58.898Z,1478858458.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:58.934Z,1478858458.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:59.316Z,1478858459.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:59.342Z,1478858459.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:00:59.724Z,1478858459.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:00:59.773Z,1478858459.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:00.094Z,1478858460.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:00.109Z,1478858460.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:00.498Z,1478858460.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:00.514Z,1478858460.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:00.907Z,1478858460.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:00.931Z,1478858460.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:01.336Z,1478858461.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:01.368Z,1478858461.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:01.703Z,1478858461.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:01.718Z,1478858461.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:02.098Z,1478858462.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:02.113Z,1478858462.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:02.503Z,1478858462.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:02.518Z,1478858462.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:05.947Z,1478858465.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:05.963Z,1478858465.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:06.075Z,1478858466.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:06.113Z,1478858466.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:06.416Z,1478858466.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:06.442Z,1478858466.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:06.819Z,1478858466.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:06.845Z,1478858466.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:07.216Z,1478858467.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:07.244Z,1478858467.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:07.624Z,1478858467.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:07.647Z,1478858467.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:08.013Z,1478858468.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:08.058Z,1478858468.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:08.413Z,1478858468.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:08.445Z,1478858468.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:08.813Z,1478858468.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:08.861Z,1478858468.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:09.213Z,1478858469.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:09.248Z,1478858469.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:09.613Z,1478858469.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:09.665Z,1478858469.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:10.013Z,1478858470.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:10.053Z,1478858470.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:10.413Z,1478858470.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:10.462Z,1478858470.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:10.813Z,1478858470.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:10.833Z,1478858470.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:11.225Z,1478858471.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:11.240Z,1478858471.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:11.619Z,1478858471.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:11.641Z,1478858471.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:12.020Z,1478858472.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:12.035Z,1478858472.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:12.420Z,1478858472.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:12.441Z,1478858472.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:12.813Z,1478858472.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:12.846Z,1478858472.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:13.221Z,1478858473.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:13.247Z,1478858473.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:13.621Z,1478858473.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:13.647Z,1478858473.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:14.013Z,1478858474.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:14.040Z,1478858474.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:14.417Z,1478858474.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:14.454Z,1478858474.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:14.813Z,1478858474.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:14.857Z,1478858474.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:15.221Z,1478858475.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:15.253Z,1478858475.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:15.617Z,1478858475.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:15.653Z,1478858475.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:16.013Z,1478858476.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:16.056Z,1478858476.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:16.413Z,1478858476.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:16.440Z,1478858476.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:16.825Z,1478858476.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:16.840Z,1478858476.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:17.229Z,1478858477.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:17.261Z,1478858477.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:17.619Z,1478858477.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:17.654Z,1478858477.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:18.021Z,1478858478.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:18.041Z,1478858478.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:18.417Z,1478858478.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:18.449Z,1478858478.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:18.822Z,1478858478.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:18.838Z,1478858478.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:19.227Z,1478858479.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:19.242Z,1478858479.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:19.630Z,1478858479.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:19.645Z,1478858479.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:20.017Z,1478858480.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:20.052Z,1478858480.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:20.413Z,1478858480.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:20.449Z,1478858480.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:20.813Z,1478858480.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:20.846Z,1478858480.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:21.213Z,1478858481.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:21.265Z,1478858481.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:21.625Z,1478858481.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:21.650Z,1478858481.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:22.021Z,1478858482.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:22.050Z,1478858482.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:22.416Z,1478858482.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:22.485Z,1478858482.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:22.820Z,1478858482.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:22.836Z,1478858482.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:23.224Z,1478858483.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:23.245Z,1478858483.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:23.621Z,1478858483.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:23.678Z,1478858483.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:24.020Z,1478858484.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:24.035Z,1478858484.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:24.424Z,1478858484.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:24.476Z,1478858484.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:24.820Z,1478858484.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:24.876Z,1478858484.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:25.228Z,1478858485.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:25.244Z,1478858485.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:25.613Z,1478858485.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:25.646Z,1478858485.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:26.013Z,1478858486.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:26.047Z,1478858486.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:26.413Z,1478858486.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:26.445Z,1478858486.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:26.813Z,1478858486.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:26.847Z,1478858486.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:27.228Z,1478858487.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:27.244Z,1478858487.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:27.613Z,1478858487.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:27.646Z,1478858487.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:28.013Z,1478858488.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:28.047Z,1478858488.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:28.413Z,1478858488.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:28.447Z,1478858488.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:28.813Z,1478858488.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:28.845Z,1478858488.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:29.221Z,1478858489.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:29.248Z,1478858489.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:29.613Z,1478858489.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:29.649Z,1478858489.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:30.013Z,1478858490.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:30.036Z,1478858490.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:30.413Z,1478858490.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:30.456Z,1478858490.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:30.813Z,1478858490.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:30.828Z,1478858490.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:31.221Z,1478858491.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:31.261Z,1478858491.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:31.618Z,1478858491.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:31.638Z,1478858491.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:32.020Z,1478858492.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:32.041Z,1478858492.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:32.421Z,1478858492.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:32.437Z,1478858492.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:32.827Z,1478858492.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:32.861Z,1478858492.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:33.213Z,1478858493.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:33.238Z,1478858493.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:33.613Z,1478858493.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:33.645Z,1478858493.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:34.013Z,1478858494.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:34.049Z,1478858494.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:34.424Z,1478858494.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:34.440Z,1478858494.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:34.820Z,1478858494.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:34.836Z,1478858494.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:35.223Z,1478858495.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:35.277Z,1478858495.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:35.620Z,1478858495.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:35.641Z,1478858495.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:36.025Z,1478858496.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:36.041Z,1478858496.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:36.420Z,1478858496.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:36.444Z,1478858496.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:36.817Z,1478858496.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:36.850Z,1478858496.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:37.213Z,1478858497.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:37.265Z,1478858497.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:37.624Z,1478858497.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:37.648Z,1478858497.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:38.013Z,1478858498.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:38.054Z,1478858498.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:38.413Z,1478858498.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:38.445Z,1478858498.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:38.817Z,1478858498.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:38.890Z,1478858498.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:39.221Z,1478858499.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:39.285Z,1478858499.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:39.613Z,1478858499.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:39.648Z,1478858499.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:40.013Z,1478858500.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:40.049Z,1478858500.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:40.413Z,1478858500.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:40.449Z,1478858500.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:40.817Z,1478858500.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:40.849Z,1478858500.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:41.221Z,1478858501.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:41.253Z,1478858501.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:41.613Z,1478858501.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:41.656Z,1478858501.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:42.013Z,1478858502.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:42.029Z,1478858502.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:42.413Z,1478858502.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:42.433Z,1478858502.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:42.813Z,1478858502.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:42.833Z,1478858502.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:43.221Z,1478858503.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:43.257Z,1478858503.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:43.613Z,1478858503.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:43.633Z,1478858503.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:44.016Z,1478858504.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:44.031Z,1478858504.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:44.416Z,1478858504.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:44.432Z,1478858504.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:44.821Z,1478858504.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:44.836Z,1478858504.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:45.225Z,1478858505.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:45.240Z,1478858505.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:45.613Z,1478858505.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:45.653Z,1478858505.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:46.018Z,1478858506.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:46.039Z,1478858506.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:46.424Z,1478858506.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:46.445Z,1478858506.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:46.820Z,1478858506.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:46.836Z,1478858506.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:47.213Z,1478858507.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:47.250Z,1478858507.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:47.613Z,1478858507.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:47.645Z,1478858507.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:48.017Z,1478858508.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:48.043Z,1478858508.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:48.413Z,1478858508.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:48.446Z,1478858508.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:48.821Z,1478858508.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:48.847Z,1478858508.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:49.213Z,1478858509.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:49.237Z,1478858509.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:49.624Z,1478858509.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:49.640Z,1478858509.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:50.024Z,1478858510.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:50.085Z,1478858510.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:50.413Z,1478858510.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:50.446Z,1478858510.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:50.821Z,1478858510.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:50.847Z,1478858510.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:51.213Z,1478858511.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:51.274Z,1478858511.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:51.613Z,1478858511.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:51.649Z,1478858511.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:52.021Z,1478858512.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:52.053Z,1478858512.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:52.413Z,1478858512.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:52.469Z,1478858512.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:52.813Z,1478858512.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:52.828Z,1478858512.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:53.226Z,1478858513.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:53.277Z,1478858513.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:53.619Z,1478858513.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:53.662Z,1478858513.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:54.013Z,1478858514.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:54.046Z,1478858514.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:54.419Z,1478858514.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:54.435Z,1478858514.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:54.816Z,1478858514.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:54.845Z,1478858514.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:55.227Z,1478858515.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:55.244Z,1478858515.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:55.620Z,1478858515.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:55.638Z,1478858515.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:56.013Z,1478858516.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:56.049Z,1478858516.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:56.413Z,1478858516.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:56.440Z,1478858516.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:56.813Z,1478858516.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:56.848Z,1478858516.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:57.213Z,1478858517.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:57.238Z,1478858517.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:57.613Z,1478858517.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:57.646Z,1478858517.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:58.013Z,1478858518.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:58.045Z,1478858518.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:58.413Z,1478858518.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:58.449Z,1478858518.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:58.813Z,1478858518.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:58.845Z,1478858518.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:59.221Z,1478858519.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:59.246Z,1478858519.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:01:59.613Z,1478858519.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:01:59.649Z,1478858519.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:00.013Z,1478858520.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:00.036Z,1478858520.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:00.424Z,1478858520.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:00.452Z,1478858520.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:00.813Z,1478858520.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:00.828Z,1478858520.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:01.216Z,1478858521.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:01.242Z,1478858521.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:01.624Z,1478858521.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:01.645Z,1478858521.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:02.021Z,1478858522.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:02.041Z,1478858522.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:02.413Z,1478858522.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:02.445Z,1478858522.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:02.818Z,1478858522.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:02.853Z,1478858522.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:06.321Z,1478858526.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:06.410Z,1478858526.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:06.507Z,1478858526.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:06.550Z,1478858526.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:06.928Z,1478858526.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:07.021Z,1478858527.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:07.296Z,1478858527.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:07.329Z,1478858527.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:07.691Z,1478858527.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:07.747Z,1478858527.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:08.095Z,1478858528.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:08.129Z,1478858528.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:08.491Z,1478858528.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:08.535Z,1478858528.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:08.893Z,1478858528.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:08.926Z,1478858528.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:09.299Z,1478858529.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:09.331Z,1478858529.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:09.691Z,1478858529.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:09.713Z,1478858529.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:10.098Z,1478858530.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:10.117Z,1478858530.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:10.497Z,1478858530.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:10.517Z,1478858530.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:10.897Z,1478858530.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:10.912Z,1478858530.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:11.291Z,1478858531.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:11.329Z,1478858531.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:11.691Z,1478858531.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:11.728Z,1478858531.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:12.091Z,1478858532.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:12.125Z,1478858532.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:12.491Z,1478858532.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:12.531Z,1478858532.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:12.891Z,1478858532.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:12.929Z,1478858532.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:13.291Z,1478858533.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:13.329Z,1478858533.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:13.691Z,1478858533.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:13.723Z,1478858533.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:14.091Z,1478858534.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:14.106Z,1478858534.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:14.491Z,1478858534.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:14.506Z,1478858534.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:14.891Z,1478858534.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:14.910Z,1478858534.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:15.296Z,1478858535.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:15.321Z,1478858535.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:15.697Z,1478858535.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:15.713Z,1478858535.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:16.098Z,1478858536.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:16.117Z,1478858536.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:16.498Z,1478858536.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:16.517Z,1478858536.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:16.896Z,1478858536.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:16.919Z,1478858536.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:17.291Z,1478858537.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:17.329Z,1478858537.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:17.706Z,1478858537.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:17.741Z,1478858537.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:18.119Z,1478858538.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:18.161Z,1478858538.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:18.500Z,1478858538.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:18.552Z,1478858538.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:18.901Z,1478858538.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:18.954Z,1478858538.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:19.293Z,1478858539.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:19.325Z,1478858539.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:19.698Z,1478858539.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:19.736Z,1478858539.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:20.100Z,1478858540.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:20.154Z,1478858540.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:20.494Z,1478858540.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:20.509Z,1478858540.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:20.898Z,1478858540.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:20.918Z,1478858540.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:21.313Z,1478858541.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:21.365Z,1478858541.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:21.707Z,1478858541.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:21.743Z,1478858541.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:22.128Z,1478858542.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:22.197Z,1478858542.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:22.498Z,1478858542.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:22.560Z,1478858542.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:22.909Z,1478858542.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:22.985Z,1478858542.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:23.304Z,1478858543.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:23.333Z,1478858543.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:23.724Z,1478858543.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:23.749Z,1478858543.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:24.096Z,1478858544.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:24.125Z,1478858544.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:24.493Z,1478858544.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:24.526Z,1478858544.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:24.903Z,1478858544.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:24.983Z,1478858544.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:25.294Z,1478858545.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:25.334Z,1478858545.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:25.698Z,1478858545.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:25.716Z,1478858545.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:26.098Z,1478858546.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:26.113Z,1478858546.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:26.497Z,1478858546.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:26.526Z,1478858546.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:26.898Z,1478858546.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:26.918Z,1478858546.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:27.309Z,1478858547.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:27.329Z,1478858547.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:27.702Z,1478858547.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:27.717Z,1478858547.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:28.098Z,1478858548.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:28.133Z,1478858548.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:28.491Z,1478858548.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:28.521Z,1478858548.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:28.900Z,1478858548.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:28.958Z,1478858548.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:29.298Z,1478858549.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:29.313Z,1478858549.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:29.691Z,1478858549.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:29.725Z,1478858549.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:30.108Z,1478858550.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:30.130Z,1478858550.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:30.503Z,1478858550.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:30.525Z,1478858550.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:30.893Z,1478858550.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:30.925Z,1478858550.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:31.295Z,1478858551.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:31.325Z,1478858551.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:31.709Z,1478858551.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:31.734Z,1478858551.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:32.102Z,1478858552.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:32.133Z,1478858552.134 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:32.134Z,1478858552.134 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85
2016-11-11T10:02:32.134Z,1478858552.134 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:02:32.149Z,1478858552.149 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:32.149Z,1478858552.149 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 85
2016-11-11T10:02:32.149Z,1478858552.149 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:02:32.155Z,1478858552.155 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:32.155Z,1478858552.155 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 85
2016-11-11T10:02:32.155Z,1478858552.155 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:02:32.186Z,1478858552.186 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:02:32.186Z,1478858552.186 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:02:32.186Z,1478858552.186 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:02:32.507Z,1478858552.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:32.558Z,1478858552.559 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:02:32.559Z,1478858552.559 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85
2016-11-11T10:02:32.559Z,1478858552.559 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:02:32.559Z,1478858552.559 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 85
2016-11-11T10:02:32.560Z,1478858552.560 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:02:32.560Z,1478858552.560 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 85
2016-11-11T10:02:32.894Z,1478858552.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:32.961Z,1478858552.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:02:32.961Z,1478858552.961 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:02:32.962Z,1478858552.962 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:02:32.976Z,1478858552.976 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:02:32.977Z,1478858552.977 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:02:32.977Z,1478858552.977 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:02:32.977Z,1478858552.977 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:02:32.978Z,1478858552.978 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:02:32.978Z,1478858552.978 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:02:33.304Z,1478858553.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:33.361Z,1478858553.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:33.694Z,1478858553.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:33.729Z,1478858553.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:34.094Z,1478858554.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:34.125Z,1478858554.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:34.499Z,1478858554.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:34.553Z,1478858554.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:34.952Z,1478858554.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:34.973Z,1478858554.973 [PNI_TCM](ERROR): CRC does not match. Expected:0x36592 got:0x43847
2016-11-11T10:02:35.036Z,1478858555.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:35.303Z,1478858555.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:35.335Z,1478858555.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:35.702Z,1478858555.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:35.750Z,1478858555.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:36.101Z,1478858556.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:36.119Z,1478858556.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:36.506Z,1478858556.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:36.553Z,1478858556.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:36.911Z,1478858556.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:36.995Z,1478858556.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:37.293Z,1478858557.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:37.329Z,1478858557.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:37.691Z,1478858557.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:37.728Z,1478858557.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:38.102Z,1478858558.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:38.117Z,1478858558.117 [PNI_TCM](ERROR): CRC does not match. Expected:0x51662 got:0x49152
2016-11-11T10:02:38.145Z,1478858558.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:38.502Z,1478858558.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:38.529Z,1478858558.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:38.949Z,1478858558.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:39.048Z,1478858559.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:39.290Z,1478858559.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:39.334Z,1478858559.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:39.702Z,1478858559.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:39.709Z,1478858559.709 [PNI_TCM](ERROR): CRC does not match. Expected:0x19080 got:0x16962
2016-11-11T10:02:39.742Z,1478858559.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:40.105Z,1478858560.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:40.132Z,1478858560.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:40.529Z,1478858560.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:40.553Z,1478858560.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:40.906Z,1478858560.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:40.929Z,1478858560.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:41.302Z,1478858561.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:41.318Z,1478858561.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:41.704Z,1478858561.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:41.720Z,1478858561.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:42.100Z,1478858562.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:42.119Z,1478858562.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:42.498Z,1478858562.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:42.549Z,1478858562.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:42.896Z,1478858562.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:42.949Z,1478858562.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:43.304Z,1478858563.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:43.338Z,1478858563.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:43.700Z,1478858563.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:43.733Z,1478858563.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:44.094Z,1478858564.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:44.137Z,1478858564.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:44.502Z,1478858564.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:44.518Z,1478858564.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:44.901Z,1478858564.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:44.930Z,1478858564.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:45.292Z,1478858565.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:45.342Z,1478858565.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:45.699Z,1478858565.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:45.741Z,1478858565.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:46.103Z,1478858566.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:46.156Z,1478858566.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:46.505Z,1478858566.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:46.564Z,1478858566.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:46.927Z,1478858566.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:46.971Z,1478858566.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:47.304Z,1478858567.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:47.332Z,1478858567.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:47.696Z,1478858567.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:47.774Z,1478858567.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:48.092Z,1478858568.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:48.137Z,1478858568.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:48.501Z,1478858568.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:48.550Z,1478858568.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:48.915Z,1478858568.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:49.034Z,1478858569.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:49.303Z,1478858569.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:49.356Z,1478858569.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:49.698Z,1478858569.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:49.714Z,1478858569.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:50.091Z,1478858570.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:50.159Z,1478858570.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:50.511Z,1478858570.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:50.526Z,1478858570.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:50.942Z,1478858570.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:51.029Z,1478858571.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:51.325Z,1478858571.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:51.345Z,1478858571.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:51.733Z,1478858571.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:51.787Z,1478858571.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:52.104Z,1478858572.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:52.145Z,1478858572.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:52.499Z,1478858572.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:52.514Z,1478858572.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:52.967Z,1478858572.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:53.010Z,1478858573.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:53.314Z,1478858573.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:53.359Z,1478858573.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:53.703Z,1478858573.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:53.733Z,1478858573.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:54.100Z,1478858574.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:54.120Z,1478858574.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:54.499Z,1478858574.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:54.527Z,1478858574.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:54.915Z,1478858574.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:54.941Z,1478858574.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:55.323Z,1478858575.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:55.349Z,1478858575.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:55.725Z,1478858575.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:55.778Z,1478858575.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:56.091Z,1478858576.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:56.129Z,1478858576.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:56.508Z,1478858576.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:56.537Z,1478858576.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:56.908Z,1478858576.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:56.949Z,1478858576.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:57.321Z,1478858577.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:57.413Z,1478858577.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:57.698Z,1478858577.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:57.737Z,1478858577.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:58.093Z,1478858578.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:58.142Z,1478858578.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:58.496Z,1478858578.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:58.534Z,1478858578.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:58.901Z,1478858578.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:58.930Z,1478858578.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:59.303Z,1478858579.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:59.364Z,1478858579.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:02:59.698Z,1478858579.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:02:59.750Z,1478858579.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:00.100Z,1478858580.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:00.152Z,1478858580.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:00.501Z,1478858580.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:00.525Z,1478858580.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:00.927Z,1478858580.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:01.023Z,1478858581.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:01.293Z,1478858581.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:01.346Z,1478858581.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:01.697Z,1478858581.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:01.748Z,1478858581.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:01.765Z,1478858581.765 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T10:03:01.765Z,1478858581.765 [Default:CheckIn:C.Wait] Stopped
2016-11-11T10:03:01.765Z,1478858581.765 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T10:03:01.766Z,1478858581.766 [Default:CheckIn:D] Running Loop=1
2016-11-11T10:03:02.097Z,1478858582.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:02.119Z,1478858582.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:02.164Z,1478858582.164 [Default:CheckIn:D] Stopped
2016-11-11T10:03:02.164Z,1478858582.164 [Default:CheckIn:E] Running Loop=1
2016-11-11T10:03:02.498Z,1478858582.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:02.569Z,1478858582.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:02.594Z,1478858582.594 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 313.014225 min 
2016-11-11T10:03:02.594Z,1478858582.594 [Default:CheckIn:E] Stopped
2016-11-11T10:03:02.594Z,1478858582.594 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T10:03:02.594Z,1478858582.594 [Default:CheckIn] Stopped
2016-11-11T10:03:02.595Z,1478858582.595 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T10:03:02.595Z,1478858582.595 [Default:CheckIn](INFO): Running loop #31
2016-11-11T10:03:02.595Z,1478858582.595 [Default:CheckIn] Running Loop=31
2016-11-11T10:03:02.595Z,1478858582.595 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T10:03:02.595Z,1478858582.595 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T10:03:02.917Z,1478858582.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:02.966Z,1478858582.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:08.261Z,1478858588.261 [NAL9602](INFO): Powering up
2016-11-11T10:03:08.278Z,1478858588.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:08.345Z,1478858588.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:08.425Z,1478858588.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:08.465Z,1478858588.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:08.826Z,1478858588.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:08.836Z,1478858588.836 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2016-11-11T10:03:08.878Z,1478858588.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:09.226Z,1478858589.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:09.268Z,1478858589.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:09.622Z,1478858589.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:09.677Z,1478858589.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:10.023Z,1478858590.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:10.062Z,1478858590.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:10.422Z,1478858590.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:10.445Z,1478858590.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:10.821Z,1478858590.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:10.836Z,1478858590.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:11.226Z,1478858591.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:11.267Z,1478858591.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:11.622Z,1478858591.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:11.672Z,1478858591.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:12.028Z,1478858592.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:12.046Z,1478858592.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:12.426Z,1478858592.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:12.442Z,1478858592.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:12.817Z,1478858592.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:12.850Z,1478858592.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:13.221Z,1478858593.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:13.241Z,1478858593.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:13.627Z,1478858593.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:13.650Z,1478858593.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:14.019Z,1478858594.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:14.041Z,1478858594.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:14.417Z,1478858594.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:14.450Z,1478858594.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:14.821Z,1478858594.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:14.879Z,1478858594.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:15.216Z,1478858595.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:15.234Z,1478858595.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:15.623Z,1478858595.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:15.639Z,1478858595.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:16.017Z,1478858596.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:16.045Z,1478858596.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:16.417Z,1478858596.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:16.436Z,1478858596.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:16.823Z,1478858596.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:16.885Z,1478858596.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:17.220Z,1478858597.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:17.236Z,1478858597.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:17.621Z,1478858597.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:17.646Z,1478858597.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:18.017Z,1478858598.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:18.036Z,1478858598.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:18.424Z,1478858598.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:18.439Z,1478858598.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:18.840Z,1478858598.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:18.893Z,1478858598.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:19.205Z,1478858599.205 [NAL9602](INFO): NAL9602 initialized
2016-11-11T10:03:19.221Z,1478858599.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:19.257Z,1478858599.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:19.618Z,1478858599.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:19.628Z,1478858599.628 [PNI_TCM](ERROR): CRC does not match. Expected:0x24079 got:0x64142
2016-11-11T10:03:19.653Z,1478858599.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:20.005Z,1478858600.005 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T10:03:20.005Z,1478858600.005 [NAL9602] Data Fault, FailCount= 3
2016-11-11T10:03:20.005Z,1478858600.005 [NAL9602](ERROR): Data Fault
2016-11-11T10:03:20.025Z,1478858600.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:20.041Z,1478858600.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:20.060Z,1478858600.060 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T10:03:20.405Z,1478858600.405 [NAL9602](INFO): Powering down
2016-11-11T10:03:20.423Z,1478858600.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:20.477Z,1478858600.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:20.821Z,1478858600.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:20.895Z,1478858600.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:21.223Z,1478858601.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:21.239Z,1478858601.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:21.306Z,1478858601.306 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T10:03:21.306Z,1478858601.306 [NAL9602] No Fault, FailCount= 3
2016-11-11T10:03:21.624Z,1478858601.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:21.640Z,1478858601.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:22.021Z,1478858602.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:22.054Z,1478858602.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:22.417Z,1478858602.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:22.442Z,1478858602.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:22.824Z,1478858602.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:22.830Z,1478858602.830 [PNI_TCM](ERROR): CRC does not match. Expected:0x11534 got:0x20769
2016-11-11T10:03:22.881Z,1478858602.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:23.219Z,1478858603.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:23.235Z,1478858603.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:23.621Z,1478858603.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:23.662Z,1478858603.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:24.017Z,1478858604.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:24.077Z,1478858604.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:24.192Z,1478858604.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:24.423Z,1478858604.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:24.430Z,1478858604.430 [PNI_TCM](ERROR): CRC does not match. Expected:0x27716 got:0x4611
2016-11-11T10:03:24.450Z,1478858604.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:24.820Z,1478858604.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:24.885Z,1478858604.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:24.988Z,1478858604.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:25.217Z,1478858605.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:25.237Z,1478858605.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:25.609Z,1478858605.609 [NAL9602](INFO): Powering up NAL9602
2016-11-11T10:03:25.628Z,1478858605.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:25.644Z,1478858605.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:26.024Z,1478858606.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:26.039Z,1478858606.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:26.422Z,1478858606.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:26.438Z,1478858606.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:26.821Z,1478858606.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:26.841Z,1478858606.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:27.223Z,1478858607.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:27.239Z,1478858607.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:27.619Z,1478858607.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:27.635Z,1478858607.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:28.021Z,1478858608.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:28.041Z,1478858608.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:28.421Z,1478858608.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:28.436Z,1478858608.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:28.830Z,1478858608.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:28.870Z,1478858608.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:29.223Z,1478858609.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:29.238Z,1478858609.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:29.621Z,1478858609.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:29.636Z,1478858609.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:30.017Z,1478858610.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:30.033Z,1478858610.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:30.423Z,1478858610.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:30.445Z,1478858610.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:30.833Z,1478858610.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:30.869Z,1478858610.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:31.217Z,1478858611.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:31.233Z,1478858611.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:31.621Z,1478858611.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:31.641Z,1478858611.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:32.020Z,1478858612.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:32.041Z,1478858612.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:32.422Z,1478858612.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:32.438Z,1478858612.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:32.831Z,1478858612.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:32.883Z,1478858612.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:33.221Z,1478858613.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:33.236Z,1478858613.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:33.619Z,1478858613.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:33.635Z,1478858613.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:34.020Z,1478858614.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:34.041Z,1478858614.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:34.438Z,1478858614.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:34.486Z,1478858614.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:34.875Z,1478858614.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:34.904Z,1478858614.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:35.223Z,1478858615.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:35.239Z,1478858615.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:35.618Z,1478858615.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:35.645Z,1478858615.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:36.018Z,1478858616.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:36.069Z,1478858616.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:36.429Z,1478858616.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:36.485Z,1478858616.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:36.802Z,1478858616.802 [NAL9602](INFO): NAL9602 initialized
2016-11-11T10:03:36.821Z,1478858616.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:36.850Z,1478858616.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:37.217Z,1478858617.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:37.261Z,1478858617.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:37.629Z,1478858617.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:37.653Z,1478858617.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:38.033Z,1478858618.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:38.077Z,1478858618.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:38.188Z,1478858618.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:38.432Z,1478858618.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:38.477Z,1478858618.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:38.818Z,1478858618.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:38.845Z,1478858618.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:38.984Z,1478858618.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:39.218Z,1478858619.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:39.253Z,1478858619.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:39.628Z,1478858619.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:39.653Z,1478858619.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:40.020Z,1478858620.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:40.047Z,1478858620.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:40.418Z,1478858620.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:40.449Z,1478858620.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:40.817Z,1478858620.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:40.837Z,1478858620.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:41.235Z,1478858621.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:41.250Z,1478858621.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:41.617Z,1478858621.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:41.657Z,1478858621.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:42.017Z,1478858622.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:42.033Z,1478858622.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:42.422Z,1478858622.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:42.445Z,1478858622.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:42.854Z,1478858622.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:42.882Z,1478858622.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:43.224Z,1478858623.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:43.244Z,1478858623.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:43.632Z,1478858623.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:43.652Z,1478858623.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:44.018Z,1478858624.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:44.067Z,1478858624.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:44.417Z,1478858624.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:44.433Z,1478858624.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:44.852Z,1478858624.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:44.917Z,1478858624.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:45.232Z,1478858625.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:45.268Z,1478858625.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:45.636Z,1478858625.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:45.664Z,1478858625.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:46.022Z,1478858626.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:46.050Z,1478858626.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:46.425Z,1478858626.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:46.440Z,1478858626.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:46.836Z,1478858626.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:46.878Z,1478858626.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:47.222Z,1478858627.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:47.238Z,1478858627.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:47.617Z,1478858627.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:47.637Z,1478858627.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:48.026Z,1478858628.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:48.042Z,1478858628.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:48.422Z,1478858628.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:48.437Z,1478858628.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:48.831Z,1478858628.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:48.874Z,1478858628.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:49.225Z,1478858629.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:49.241Z,1478858629.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:49.637Z,1478858629.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:49.652Z,1478858629.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:50.036Z,1478858630.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:50.085Z,1478858630.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:50.417Z,1478858630.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:50.481Z,1478858630.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:50.817Z,1478858630.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:50.856Z,1478858630.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:51.217Z,1478858631.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:51.262Z,1478858631.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:51.617Z,1478858631.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:51.653Z,1478858631.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:52.021Z,1478858632.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:52.081Z,1478858632.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:52.164Z,1478858632.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:52.421Z,1478858632.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:52.469Z,1478858632.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:52.821Z,1478858632.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:52.841Z,1478858632.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:52.960Z,1478858632.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:53.224Z,1478858633.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:53.240Z,1478858633.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:53.628Z,1478858633.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:53.644Z,1478858633.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:54.025Z,1478858634.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:54.041Z,1478858634.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:54.417Z,1478858634.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:54.453Z,1478858634.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:54.828Z,1478858634.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:54.849Z,1478858634.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:55.217Z,1478858635.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:55.295Z,1478858635.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:55.617Z,1478858635.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:55.650Z,1478858635.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:56.022Z,1478858636.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:56.048Z,1478858636.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:56.417Z,1478858636.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:56.453Z,1478858636.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:56.846Z,1478858636.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:56.878Z,1478858636.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:57.217Z,1478858637.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:57.237Z,1478858637.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:57.624Z,1478858637.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:57.640Z,1478858637.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:58.032Z,1478858638.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:58.053Z,1478858638.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:58.429Z,1478858638.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:58.445Z,1478858638.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:58.829Z,1478858638.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:58.866Z,1478858638.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:59.222Z,1478858639.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:59.256Z,1478858639.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:03:59.617Z,1478858639.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:03:59.653Z,1478858639.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:00.017Z,1478858640.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:00.053Z,1478858640.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:00.417Z,1478858640.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:00.454Z,1478858640.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:00.827Z,1478858640.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:00.869Z,1478858640.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:01.217Z,1478858641.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:01.233Z,1478858641.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:01.624Z,1478858641.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:01.646Z,1478858641.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:02.029Z,1478858642.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:02.044Z,1478858642.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:02.439Z,1478858642.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:02.455Z,1478858642.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:02.839Z,1478858642.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:02.877Z,1478858642.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:03.234Z,1478858643.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:03.258Z,1478858643.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:06.584Z,1478858646.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:06.673Z,1478858646.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:06.764Z,1478858646.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:06.792Z,1478858646.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:07.154Z,1478858647.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:07.268Z,1478858647.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:07.555Z,1478858647.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:07.570Z,1478858647.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:07.952Z,1478858647.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:08.001Z,1478858648.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:08.352Z,1478858648.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:08.401Z,1478858648.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:08.754Z,1478858648.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:08.771Z,1478858648.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:09.154Z,1478858649.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:09.170Z,1478858649.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:09.548Z,1478858649.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:09.581Z,1478858649.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:09.947Z,1478858649.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:09.980Z,1478858649.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:10.345Z,1478858650.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:10.377Z,1478858650.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:10.747Z,1478858650.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:10.785Z,1478858650.785 [PNI_TCM](ERROR): CRC does not match. Expected:0x44025 got:0x1857
2016-11-11T10:04:10.833Z,1478858650.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:11.160Z,1478858651.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:11.175Z,1478858651.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:11.560Z,1478858651.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:11.576Z,1478858651.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:11.960Z,1478858651.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:11.974Z,1478858651.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:12.356Z,1478858652.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:12.371Z,1478858652.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:12.762Z,1478858652.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:12.824Z,1478858652.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:13.149Z,1478858653.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:13.174Z,1478858653.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:13.547Z,1478858653.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:13.581Z,1478858653.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:13.948Z,1478858653.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:13.976Z,1478858653.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:14.346Z,1478858654.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:14.389Z,1478858654.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:14.752Z,1478858654.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:14.811Z,1478858654.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:15.151Z,1478858655.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:15.167Z,1478858655.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:15.562Z,1478858655.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:15.590Z,1478858655.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:15.960Z,1478858655.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:15.992Z,1478858655.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:16.360Z,1478858656.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:16.380Z,1478858656.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:16.760Z,1478858656.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:16.821Z,1478858656.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:17.151Z,1478858657.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:17.167Z,1478858657.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:17.553Z,1478858657.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:17.590Z,1478858657.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:17.953Z,1478858657.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:17.973Z,1478858657.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:18.358Z,1478858658.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:18.373Z,1478858658.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:18.754Z,1478858658.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:18.769Z,1478858658.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:19.153Z,1478858659.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:19.173Z,1478858659.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:19.557Z,1478858659.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:19.577Z,1478858659.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:19.951Z,1478858659.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:19.984Z,1478858659.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:20.347Z,1478858660.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:20.429Z,1478858660.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:20.746Z,1478858660.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:20.773Z,1478858660.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:21.145Z,1478858661.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:21.190Z,1478858661.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:21.548Z,1478858661.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:21.593Z,1478858661.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:21.950Z,1478858661.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:22.001Z,1478858662.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:22.345Z,1478858662.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:22.394Z,1478858662.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:22.749Z,1478858662.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:22.793Z,1478858662.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:23.151Z,1478858663.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:23.167Z,1478858663.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:23.548Z,1478858663.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:23.578Z,1478858663.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:23.964Z,1478858663.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:23.980Z,1478858663.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:24.367Z,1478858664.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:24.387Z,1478858664.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:24.786Z,1478858664.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:24.836Z,1478858664.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:25.145Z,1478858665.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:25.177Z,1478858665.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:25.546Z,1478858665.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:25.577Z,1478858665.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:25.945Z,1478858665.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:25.977Z,1478858665.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:26.347Z,1478858666.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:26.381Z,1478858666.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:26.819Z,1478858666.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:26.853Z,1478858666.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:27.149Z,1478858667.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:27.185Z,1478858667.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:27.545Z,1478858667.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:27.582Z,1478858667.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:27.946Z,1478858667.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:27.962Z,1478858667.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:28.360Z,1478858668.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:28.394Z,1478858668.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:28.797Z,1478858668.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:28.830Z,1478858668.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:29.146Z,1478858669.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:29.165Z,1478858669.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:29.553Z,1478858669.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:29.573Z,1478858669.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:29.964Z,1478858669.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:29.979Z,1478858669.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:30.368Z,1478858670.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:30.403Z,1478858670.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:30.770Z,1478858670.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:30.807Z,1478858670.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:31.157Z,1478858671.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:31.172Z,1478858671.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:31.562Z,1478858671.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:31.577Z,1478858671.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:31.953Z,1478858671.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:31.976Z,1478858671.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:32.345Z,1478858672.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:32.377Z,1478858672.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:32.746Z,1478858672.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:32.777Z,1478858672.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:33.145Z,1478858673.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:33.165Z,1478858673.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:33.545Z,1478858673.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:33.565Z,1478858673.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:33.957Z,1478858673.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:33.998Z,1478858673.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:34.351Z,1478858674.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:34.405Z,1478858674.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:34.752Z,1478858674.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:34.767Z,1478858674.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:35.153Z,1478858675.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:35.226Z,1478858675.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:35.546Z,1478858675.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:35.578Z,1478858675.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:35.945Z,1478858675.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:35.990Z,1478858675.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:36.345Z,1478858676.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:36.389Z,1478858676.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:36.745Z,1478858676.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:36.781Z,1478858676.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:37.145Z,1478858677.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:37.232Z,1478858677.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:37.546Z,1478858677.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:37.561Z,1478858677.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:37.956Z,1478858677.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:37.992Z,1478858677.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:38.368Z,1478858678.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:38.393Z,1478858678.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:38.785Z,1478858678.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:38.815Z,1478858678.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:39.150Z,1478858679.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:39.170Z,1478858679.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:39.550Z,1478858679.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:39.570Z,1478858679.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:39.953Z,1478858679.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:39.968Z,1478858679.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:40.349Z,1478858680.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:40.372Z,1478858680.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:40.758Z,1478858680.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:40.814Z,1478858680.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:41.154Z,1478858681.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:41.169Z,1478858681.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:41.548Z,1478858681.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:41.580Z,1478858681.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:41.956Z,1478858681.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:41.971Z,1478858681.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:42.345Z,1478858682.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:42.377Z,1478858682.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:42.764Z,1478858682.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:42.797Z,1478858682.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:43.149Z,1478858683.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:43.185Z,1478858683.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:43.545Z,1478858683.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:43.585Z,1478858683.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:43.948Z,1478858683.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:43.999Z,1478858683.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:44.345Z,1478858684.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:44.361Z,1478858684.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:44.762Z,1478858684.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:44.809Z,1478858684.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:45.155Z,1478858685.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:45.177Z,1478858685.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:45.556Z,1478858685.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:45.577Z,1478858685.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:45.950Z,1478858685.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:45.981Z,1478858685.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:46.353Z,1478858686.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:46.369Z,1478858686.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:46.761Z,1478858686.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:46.781Z,1478858686.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:47.146Z,1478858687.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:47.177Z,1478858687.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:47.545Z,1478858687.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:47.577Z,1478858687.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:47.945Z,1478858687.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:47.981Z,1478858687.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:48.346Z,1478858688.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:48.405Z,1478858688.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:48.745Z,1478858688.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:48.783Z,1478858688.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:49.162Z,1478858689.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:49.262Z,1478858689.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:49.553Z,1478858689.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:49.568Z,1478858689.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:49.957Z,1478858689.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:50.017Z,1478858690.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:50.349Z,1478858690.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:50.372Z,1478858690.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:50.754Z,1478858690.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:50.808Z,1478858690.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:51.185Z,1478858691.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:51.249Z,1478858691.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:51.559Z,1478858691.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:51.575Z,1478858691.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:51.957Z,1478858691.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:51.973Z,1478858691.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:52.345Z,1478858692.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:52.377Z,1478858692.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:52.739Z,1478858692.739 [NAL9602](INFO): SBD MO Status=2, MOMSN=341, MT Status=2, MTMSN=0
2016-11-11T10:04:52.740Z,1478858692.740 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T10:04:52.771Z,1478858692.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:52.821Z,1478858692.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:53.167Z,1478858693.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:53.186Z,1478858693.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:53.545Z,1478858693.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:53.577Z,1478858693.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:53.949Z,1478858693.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:53.982Z,1478858693.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:54.345Z,1478858694.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:54.381Z,1478858694.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:54.750Z,1478858694.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:54.797Z,1478858694.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:55.145Z,1478858695.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:55.181Z,1478858695.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:55.545Z,1478858695.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:55.561Z,1478858695.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:55.945Z,1478858695.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:55.965Z,1478858695.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:56.349Z,1478858696.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:56.369Z,1478858696.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:56.752Z,1478858696.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:56.803Z,1478858696.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:57.163Z,1478858697.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:57.179Z,1478858697.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:57.558Z,1478858697.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:57.590Z,1478858697.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:57.954Z,1478858697.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:57.970Z,1478858697.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:58.345Z,1478858698.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:58.377Z,1478858698.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:58.754Z,1478858698.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:58.794Z,1478858698.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:59.150Z,1478858699.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:59.178Z,1478858699.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:59.546Z,1478858699.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:59.562Z,1478858699.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:04:59.948Z,1478858699.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:04:59.966Z,1478858699.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:00.353Z,1478858700.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:00.373Z,1478858700.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:00.749Z,1478858700.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:00.805Z,1478858700.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:01.161Z,1478858701.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:01.181Z,1478858701.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:01.567Z,1478858701.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:01.583Z,1478858701.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:01.961Z,1478858701.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:01.989Z,1478858701.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:02.345Z,1478858702.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:02.371Z,1478858702.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:02.745Z,1478858702.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:02.773Z,1478858702.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:03.185Z,1478858703.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:03.281Z,1478858703.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:03.549Z,1478858703.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:03.565Z,1478858703.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:03.636Z,1478858703.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:04.432Z,1478858704.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:07.084Z,1478858707.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:07.139Z,1478858707.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:07.236Z,1478858707.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:07.265Z,1478858707.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:07.589Z,1478858707.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:07.642Z,1478858707.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:07.998Z,1478858707.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:08.049Z,1478858708.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:08.393Z,1478858708.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:08.413Z,1478858708.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:08.826Z,1478858708.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:08.842Z,1478858708.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:09.212Z,1478858709.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:09.239Z,1478858709.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:09.592Z,1478858709.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:09.622Z,1478858709.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:09.996Z,1478858709.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:10.012Z,1478858710.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:10.398Z,1478858710.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:10.413Z,1478858710.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:10.804Z,1478858710.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:10.819Z,1478858710.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:11.200Z,1478858711.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:11.216Z,1478858711.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:11.590Z,1478858711.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:11.625Z,1478858711.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:11.989Z,1478858711.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:12.021Z,1478858712.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:12.393Z,1478858712.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:12.425Z,1478858712.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:12.798Z,1478858712.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:12.825Z,1478858712.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:13.189Z,1478858713.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:13.225Z,1478858713.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:13.589Z,1478858713.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:13.625Z,1478858713.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:13.990Z,1478858713.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:14.033Z,1478858714.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:14.389Z,1478858714.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:14.430Z,1478858714.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:14.799Z,1478858714.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:14.847Z,1478858714.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:15.197Z,1478858715.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:15.225Z,1478858715.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:15.597Z,1478858715.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:15.617Z,1478858715.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:15.997Z,1478858715.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:16.013Z,1478858716.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:16.394Z,1478858716.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:16.422Z,1478858716.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:16.796Z,1478858716.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:16.812Z,1478858716.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:17.206Z,1478858717.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:17.230Z,1478858717.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:17.593Z,1478858717.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:17.629Z,1478858717.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:17.989Z,1478858717.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:18.025Z,1478858718.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:18.390Z,1478858718.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:18.421Z,1478858718.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:18.796Z,1478858718.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:18.812Z,1478858718.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:19.198Z,1478858719.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:19.213Z,1478858719.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:19.593Z,1478858719.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:19.609Z,1478858719.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:19.996Z,1478858719.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:20.050Z,1478858720.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:20.390Z,1478858720.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:20.429Z,1478858720.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:20.803Z,1478858720.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:20.819Z,1478858720.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:21.197Z,1478858721.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:21.213Z,1478858721.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:21.589Z,1478858721.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:21.637Z,1478858721.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:21.989Z,1478858721.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:22.025Z,1478858722.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:22.389Z,1478858722.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:22.449Z,1478858722.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:22.790Z,1478858722.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:22.837Z,1478858722.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:23.197Z,1478858723.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:23.237Z,1478858723.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:23.593Z,1478858723.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:23.613Z,1478858723.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:24.001Z,1478858724.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:24.021Z,1478858724.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:24.399Z,1478858724.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:24.414Z,1478858724.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:24.801Z,1478858724.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:24.817Z,1478858724.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:25.192Z,1478858725.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:25.220Z,1478858725.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:25.600Z,1478858725.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:25.621Z,1478858725.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:25.998Z,1478858725.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:26.014Z,1478858726.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:26.389Z,1478858726.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:26.421Z,1478858726.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:26.804Z,1478858726.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:26.820Z,1478858726.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:27.189Z,1478858727.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:27.225Z,1478858727.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:27.589Z,1478858727.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:27.622Z,1478858727.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:27.989Z,1478858727.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:28.025Z,1478858728.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:28.374Z,1478858728.374 [NAL9602](INFO): SBD MO Status=2, MOMSN=341, MT Status=2, MTMSN=0
2016-11-11T10:05:28.374Z,1478858728.374 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T10:05:28.391Z,1478858728.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:28.427Z,1478858728.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:28.825Z,1478858728.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:28.858Z,1478858728.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:29.197Z,1478858729.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:29.233Z,1478858729.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:29.596Z,1478858729.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:29.620Z,1478858729.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:29.990Z,1478858729.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:30.006Z,1478858730.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:30.393Z,1478858730.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:30.417Z,1478858730.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:30.799Z,1478858730.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:30.814Z,1478858730.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:31.200Z,1478858731.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:31.224Z,1478858731.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:31.597Z,1478858731.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:31.619Z,1478858731.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:31.998Z,1478858731.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:32.020Z,1478858732.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:32.389Z,1478858732.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:32.425Z,1478858732.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:32.808Z,1478858732.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:32.830Z,1478858732.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:33.219Z,1478858733.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:33.235Z,1478858733.235 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:33.235Z,1478858733.236 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86
2016-11-11T10:05:33.235Z,1478858733.236 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:05:33.242Z,1478858733.242 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:33.242Z,1478858733.242 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 86
2016-11-11T10:05:33.242Z,1478858733.242 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:05:33.244Z,1478858733.244 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:33.244Z,1478858733.244 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 86
2016-11-11T10:05:33.245Z,1478858733.245 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:05:33.283Z,1478858733.283 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:05:33.284Z,1478858733.284 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:05:33.284Z,1478858733.284 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:05:33.589Z,1478858733.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:33.650Z,1478858733.650 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:05:33.650Z,1478858733.650 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86
2016-11-11T10:05:33.655Z,1478858733.655 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:05:33.655Z,1478858733.655 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 86
2016-11-11T10:05:33.656Z,1478858733.656 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:05:33.656Z,1478858733.656 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 86
2016-11-11T10:05:33.993Z,1478858733.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:34.012Z,1478858734.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:05:34.012Z,1478858734.012 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:05:34.013Z,1478858734.013 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:05:34.038Z,1478858734.038 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:05:34.038Z,1478858734.038 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:05:34.038Z,1478858734.039 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:05:34.043Z,1478858734.043 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:05:34.044Z,1478858734.044 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:05:34.044Z,1478858734.044 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:05:34.402Z,1478858734.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:34.417Z,1478858734.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:34.798Z,1478858734.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:34.873Z,1478858734.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:35.189Z,1478858735.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:35.215Z,1478858735.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:35.598Z,1478858735.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:35.613Z,1478858735.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:36.008Z,1478858736.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:36.061Z,1478858736.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:36.396Z,1478858736.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:36.412Z,1478858736.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:36.806Z,1478858736.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:36.855Z,1478858736.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:37.192Z,1478858737.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:37.243Z,1478858737.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:37.600Z,1478858737.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:37.616Z,1478858737.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:37.997Z,1478858737.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:38.013Z,1478858738.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:38.389Z,1478858738.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:38.421Z,1478858738.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:38.797Z,1478858738.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:38.830Z,1478858738.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:39.190Z,1478858739.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:39.205Z,1478858739.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:39.589Z,1478858739.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:39.609Z,1478858739.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:39.993Z,1478858739.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:40.013Z,1478858740.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:40.396Z,1478858740.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:40.412Z,1478858740.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:40.807Z,1478858740.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:40.822Z,1478858740.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:41.193Z,1478858741.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:41.225Z,1478858741.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:41.593Z,1478858741.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:41.616Z,1478858741.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:41.993Z,1478858741.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:42.017Z,1478858742.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:42.392Z,1478858742.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:42.424Z,1478858742.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:42.812Z,1478858742.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:42.852Z,1478858742.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:43.184Z,1478858743.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:43.192Z,1478858743.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:43.223Z,1478858743.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:43.590Z,1478858743.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:43.605Z,1478858743.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:43.980Z,1478858743.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:43.991Z,1478858743.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:44.007Z,1478858744.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:44.393Z,1478858744.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:44.433Z,1478858744.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:44.799Z,1478858744.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:44.816Z,1478858744.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:45.206Z,1478858745.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:45.222Z,1478858745.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:45.596Z,1478858745.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:45.613Z,1478858745.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:45.000Z,1478858746.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:46.018Z,1478858746.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:46.398Z,1478858746.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:46.414Z,1478858746.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:46.800Z,1478858746.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:46.816Z,1478858746.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:47.205Z,1478858747.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:47.220Z,1478858747.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:47.590Z,1478858747.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:47.621Z,1478858747.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:47.989Z,1478858747.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:48.025Z,1478858748.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:48.389Z,1478858748.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:48.432Z,1478858748.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:48.798Z,1478858748.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:48.834Z,1478858748.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:49.197Z,1478858749.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:49.277Z,1478858749.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:49.595Z,1478858749.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:49.610Z,1478858749.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:49.993Z,1478858749.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:50.044Z,1478858750.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:50.394Z,1478858750.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:50.414Z,1478858750.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:50.801Z,1478858750.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:50.853Z,1478858750.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:51.198Z,1478858751.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:51.213Z,1478858751.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:51.596Z,1478858751.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:51.651Z,1478858751.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:51.996Z,1478858751.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:52.014Z,1478858752.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:52.397Z,1478858752.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:52.413Z,1478858752.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:52.792Z,1478858752.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:52.816Z,1478858752.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:53.197Z,1478858753.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:53.217Z,1478858753.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:53.237Z,1478858753.237 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T10:05:53.590Z,1478858753.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:53.625Z,1478858753.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:53.989Z,1478858753.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:54.015Z,1478858754.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:54.389Z,1478858754.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:54.424Z,1478858754.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:54.798Z,1478858754.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:54.824Z,1478858754.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:55.189Z,1478858755.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:55.209Z,1478858755.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:55.589Z,1478858755.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:55.609Z,1478858755.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:55.993Z,1478858755.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:56.009Z,1478858756.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:56.397Z,1478858756.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:56.412Z,1478858756.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:56.803Z,1478858756.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:56.818Z,1478858756.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:57.198Z,1478858757.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:57.213Z,1478858757.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:57.592Z,1478858757.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:57.620Z,1478858757.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:57.948Z,1478858757.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:57.000Z,1478858758.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:58.025Z,1478858758.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:58.398Z,1478858758.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:58.413Z,1478858758.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:58.746Z,1478858758.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:58.789Z,1478858758.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:58.825Z,1478858758.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:59.189Z,1478858759.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:59.225Z,1478858759.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:59.590Z,1478858759.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:05:59.613Z,1478858759.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:05:59.994Z,1478858759.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:00.026Z,1478858760.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:00.398Z,1478858760.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:00.423Z,1478858760.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:00.789Z,1478858760.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:00.805Z,1478858760.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:01.189Z,1478858761.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:01.209Z,1478858761.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:01.593Z,1478858761.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:01.613Z,1478858761.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:01.994Z,1478858761.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:02.014Z,1478858762.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:02.392Z,1478858762.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:02.425Z,1478858762.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:02.796Z,1478858762.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:02.811Z,1478858762.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:03.198Z,1478858763.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:03.257Z,1478858763.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:03.592Z,1478858763.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:03.645Z,1478858763.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:07.030Z,1478858767.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:07.068Z,1478858767.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:07.146Z,1478858767.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:07.185Z,1478858767.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:07.525Z,1478858767.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:07.545Z,1478858767.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:07.929Z,1478858767.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:07.985Z,1478858767.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:08.320Z,1478858768.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:08.354Z,1478858768.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:08.731Z,1478858768.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:08.780Z,1478858768.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:09.125Z,1478858769.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:09.177Z,1478858769.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:09.521Z,1478858769.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:09.552Z,1478858769.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:09.924Z,1478858769.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:09.939Z,1478858769.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:10.329Z,1478858770.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:10.344Z,1478858770.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:10.738Z,1478858770.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:10.754Z,1478858770.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:11.125Z,1478858771.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:11.147Z,1478858771.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:11.192Z,1478858771.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:11.502Z,1478858771.502 [NAL9602](INFO): SBD MO Status=2, MOMSN=341, MT Status=2, MTMSN=0
2016-11-11T10:06:11.502Z,1478858771.502 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T10:06:11.519Z,1478858771.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:11.554Z,1478858771.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:11.933Z,1478858771.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:11.967Z,1478858771.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:11.988Z,1478858771.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:12.321Z,1478858772.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:12.357Z,1478858772.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:12.721Z,1478858772.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:12.757Z,1478858772.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:13.120Z,1478858773.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:13.154Z,1478858773.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:13.526Z,1478858773.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:13.550Z,1478858773.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:13.921Z,1478858773.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:13.945Z,1478858773.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:14.326Z,1478858774.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:14.346Z,1478858774.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:14.726Z,1478858774.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:14.745Z,1478858774.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:15.137Z,1478858775.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:15.153Z,1478858775.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:15.518Z,1478858775.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:15.555Z,1478858775.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:15.941Z,1478858775.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:15.956Z,1478858775.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:16.340Z,1478858776.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:16.368Z,1478858776.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:16.717Z,1478858776.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:16.750Z,1478858776.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:17.117Z,1478858777.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:17.134Z,1478858777.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:17.517Z,1478858777.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:17.538Z,1478858777.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:17.917Z,1478858777.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:17.938Z,1478858777.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:18.324Z,1478858778.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:18.341Z,1478858778.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:18.740Z,1478858778.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:18.774Z,1478858778.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:19.136Z,1478858779.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:19.168Z,1478858779.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:19.525Z,1478858779.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:19.540Z,1478858779.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:19.929Z,1478858779.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:19.944Z,1478858779.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:20.328Z,1478858780.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:20.344Z,1478858780.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:20.732Z,1478858780.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:20.748Z,1478858780.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:21.117Z,1478858781.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:21.189Z,1478858781.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:21.517Z,1478858781.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:21.557Z,1478858781.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:21.917Z,1478858781.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:21.970Z,1478858781.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:22.317Z,1478858782.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:22.337Z,1478858782.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:22.725Z,1478858782.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:22.777Z,1478858782.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:23.121Z,1478858783.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:23.177Z,1478858783.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:23.520Z,1478858783.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:23.541Z,1478858783.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:23.921Z,1478858783.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:23.957Z,1478858783.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:24.328Z,1478858784.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:24.343Z,1478858784.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:24.727Z,1478858784.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:24.772Z,1478858784.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:25.120Z,1478858785.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:25.153Z,1478858785.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:25.524Z,1478858785.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:25.545Z,1478858785.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:25.924Z,1478858785.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:25.939Z,1478858785.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:26.326Z,1478858786.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:26.347Z,1478858786.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:26.724Z,1478858786.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:26.745Z,1478858786.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:27.117Z,1478858787.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:27.142Z,1478858787.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:27.517Z,1478858787.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:27.549Z,1478858787.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:27.940Z,1478858787.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:27.955Z,1478858787.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:28.317Z,1478858788.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:28.351Z,1478858788.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:28.717Z,1478858788.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:28.749Z,1478858788.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:29.132Z,1478858789.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:29.148Z,1478858789.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:29.517Z,1478858789.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:29.551Z,1478858789.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:29.917Z,1478858789.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:29.957Z,1478858789.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:30.317Z,1478858790.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:30.352Z,1478858790.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:30.717Z,1478858790.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:30.753Z,1478858790.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:31.117Z,1478858791.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:31.153Z,1478858791.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:31.521Z,1478858791.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:31.549Z,1478858791.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:31.917Z,1478858791.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:31.957Z,1478858791.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:32.317Z,1478858792.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:32.337Z,1478858792.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:32.729Z,1478858792.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:32.763Z,1478858792.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:33.122Z,1478858793.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:33.138Z,1478858793.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:33.521Z,1478858793.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:33.541Z,1478858793.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:33.924Z,1478858793.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:33.939Z,1478858793.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:34.324Z,1478858794.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:34.345Z,1478858794.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:34.724Z,1478858794.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:34.785Z,1478858794.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:35.129Z,1478858795.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:35.189Z,1478858795.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:35.517Z,1478858795.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:35.551Z,1478858795.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:35.922Z,1478858795.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:35.973Z,1478858795.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:36.317Z,1478858796.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:36.355Z,1478858796.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:36.725Z,1478858796.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:36.796Z,1478858796.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:37.117Z,1478858797.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:37.153Z,1478858797.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:37.521Z,1478858797.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:37.569Z,1478858797.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:37.917Z,1478858797.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:37.965Z,1478858797.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:38.317Z,1478858798.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:38.353Z,1478858798.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:38.728Z,1478858798.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:38.770Z,1478858798.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:39.118Z,1478858799.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:39.162Z,1478858799.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:39.517Z,1478858799.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:39.557Z,1478858799.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:39.918Z,1478858799.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:39.934Z,1478858799.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:40.322Z,1478858800.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:40.337Z,1478858800.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:40.726Z,1478858800.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:40.741Z,1478858800.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:41.129Z,1478858801.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:41.149Z,1478858801.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:41.524Z,1478858801.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:41.552Z,1478858801.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:41.917Z,1478858801.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:41.956Z,1478858801.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:42.328Z,1478858802.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:42.349Z,1478858802.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:42.717Z,1478858802.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:42.752Z,1478858802.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:43.133Z,1478858803.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:43.148Z,1478858803.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:43.532Z,1478858803.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:43.553Z,1478858803.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:43.917Z,1478858803.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:43.952Z,1478858803.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:44.317Z,1478858804.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:44.343Z,1478858804.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:44.733Z,1478858804.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:44.753Z,1478858804.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:45.117Z,1478858805.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:45.153Z,1478858805.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:45.525Z,1478858805.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:45.551Z,1478858805.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:45.917Z,1478858805.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:45.950Z,1478858805.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:46.318Z,1478858806.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:46.353Z,1478858806.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:46.729Z,1478858806.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:46.760Z,1478858806.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:47.129Z,1478858807.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:47.160Z,1478858807.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:47.526Z,1478858807.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:47.556Z,1478858807.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:47.910Z,1478858807.910 [NAL9602](INFO): SBD MO Status=2, MOMSN=341, MT Status=2, MTMSN=0
2016-11-11T10:06:47.910Z,1478858807.910 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T10:06:47.927Z,1478858807.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:47.959Z,1478858807.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:48.328Z,1478858808.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:48.360Z,1478858808.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:48.731Z,1478858808.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:48.746Z,1478858808.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:49.125Z,1478858809.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:49.145Z,1478858809.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:49.524Z,1478858809.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:49.540Z,1478858809.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:49.927Z,1478858809.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:50.012Z,1478858810.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:50.325Z,1478858810.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:50.348Z,1478858810.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:50.717Z,1478858810.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:50.784Z,1478858810.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:51.117Z,1478858811.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:51.145Z,1478858811.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:51.517Z,1478858811.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:51.565Z,1478858811.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:51.940Z,1478858811.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:51.995Z,1478858811.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:52.342Z,1478858812.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:52.357Z,1478858812.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:52.726Z,1478858812.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:52.752Z,1478858812.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:53.122Z,1478858813.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:53.149Z,1478858813.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:53.535Z,1478858813.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:53.562Z,1478858813.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:53.936Z,1478858813.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:53.980Z,1478858813.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:54.317Z,1478858814.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:54.341Z,1478858814.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:54.722Z,1478858814.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:54.745Z,1478858814.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:55.122Z,1478858815.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:55.139Z,1478858815.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:55.528Z,1478858815.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:55.545Z,1478858815.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:55.925Z,1478858815.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:55.942Z,1478858815.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:56.329Z,1478858816.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:56.346Z,1478858816.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:56.733Z,1478858816.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:56.750Z,1478858816.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:57.117Z,1478858817.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:57.143Z,1478858817.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:57.517Z,1478858817.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:57.549Z,1478858817.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:57.921Z,1478858817.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:57.958Z,1478858817.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:58.317Z,1478858818.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:58.353Z,1478858818.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:58.717Z,1478858818.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:58.753Z,1478858818.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:59.117Z,1478858819.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:59.153Z,1478858819.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:59.517Z,1478858819.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:59.553Z,1478858819.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:06:59.918Z,1478858819.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:06:59.953Z,1478858819.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:00.325Z,1478858820.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:00.351Z,1478858820.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:00.725Z,1478858820.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:00.752Z,1478858820.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:01.117Z,1478858821.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:01.153Z,1478858821.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:01.525Z,1478858821.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:01.552Z,1478858821.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:01.917Z,1478858821.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:01.952Z,1478858821.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:02.336Z,1478858822.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:02.367Z,1478858822.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:02.743Z,1478858822.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:02.759Z,1478858822.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:03.117Z,1478858823.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:03.132Z,1478858823.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:03.518Z,1478858823.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:03.533Z,1478858823.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:03.922Z,1478858823.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:03.993Z,1478858823.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:07.384Z,1478858827.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:07.420Z,1478858827.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:07.528Z,1478858827.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:07.568Z,1478858827.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:07.877Z,1478858827.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:07.893Z,1478858827.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:08.277Z,1478858828.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:08.327Z,1478858828.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:08.680Z,1478858828.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:08.701Z,1478858828.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:09.076Z,1478858829.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:09.131Z,1478858829.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:09.479Z,1478858829.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:09.532Z,1478858829.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:09.872Z,1478858829.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:09.902Z,1478858829.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:10.273Z,1478858830.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:10.303Z,1478858830.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:10.677Z,1478858830.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:10.697Z,1478858830.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:11.085Z,1478858831.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:11.105Z,1478858831.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:11.481Z,1478858831.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:11.501Z,1478858831.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:11.869Z,1478858831.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:11.903Z,1478858831.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:12.269Z,1478858832.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:12.301Z,1478858832.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:12.689Z,1478858832.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:12.725Z,1478858832.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:13.085Z,1478858833.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:13.100Z,1478858833.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:13.477Z,1478858833.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:13.503Z,1478858833.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:13.877Z,1478858833.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:13.903Z,1478858833.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:14.269Z,1478858834.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:14.308Z,1478858834.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:14.678Z,1478858834.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:14.703Z,1478858834.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:15.088Z,1478858835.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:15.119Z,1478858835.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:15.480Z,1478858835.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:15.505Z,1478858835.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:15.874Z,1478858835.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:15.905Z,1478858835.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:16.277Z,1478858836.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:16.303Z,1478858836.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:16.678Z,1478858836.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:16.709Z,1478858836.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:17.100Z,1478858837.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:17.115Z,1478858837.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:17.480Z,1478858837.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:17.513Z,1478858837.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:17.869Z,1478858837.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:17.912Z,1478858837.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:18.270Z,1478858838.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:18.309Z,1478858838.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:18.669Z,1478858838.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:18.689Z,1478858838.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:19.069Z,1478858839.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:19.089Z,1478858839.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:19.477Z,1478858839.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:19.493Z,1478858839.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:19.877Z,1478858839.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:19.893Z,1478858839.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:20.272Z,1478858840.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:20.297Z,1478858840.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:20.683Z,1478858840.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:20.699Z,1478858840.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:21.072Z,1478858841.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:21.100Z,1478858841.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:21.473Z,1478858841.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:21.550Z,1478858841.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:21.881Z,1478858841.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:21.904Z,1478858841.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:22.273Z,1478858842.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:22.305Z,1478858842.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:22.674Z,1478858842.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:22.738Z,1478858842.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:23.069Z,1478858843.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:23.095Z,1478858843.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:23.473Z,1478858843.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:23.538Z,1478858843.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:23.891Z,1478858843.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:23.906Z,1478858843.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:24.292Z,1478858844.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:24.347Z,1478858844.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:24.673Z,1478858844.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:24.700Z,1478858844.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:25.069Z,1478858845.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:25.103Z,1478858845.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:25.470Z,1478858845.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:25.505Z,1478858845.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:25.870Z,1478858845.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:25.902Z,1478858845.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:26.270Z,1478858846.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:26.307Z,1478858846.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:26.670Z,1478858846.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:26.706Z,1478858846.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:27.074Z,1478858847.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:27.102Z,1478858847.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:27.469Z,1478858847.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:27.506Z,1478858847.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:27.869Z,1478858847.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:27.906Z,1478858847.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:28.273Z,1478858848.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:28.310Z,1478858848.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:28.682Z,1478858848.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:28.729Z,1478858848.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:29.069Z,1478858849.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:29.089Z,1478858849.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:29.473Z,1478858849.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:29.493Z,1478858849.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:29.873Z,1478858849.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:29.893Z,1478858849.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:30.275Z,1478858850.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:30.294Z,1478858850.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:30.676Z,1478858850.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:30.692Z,1478858850.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:31.076Z,1478858851.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:31.091Z,1478858851.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:31.472Z,1478858851.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:31.504Z,1478858851.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:31.881Z,1478858851.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:31.896Z,1478858851.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:32.288Z,1478858852.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:32.303Z,1478858852.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:32.693Z,1478858852.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:32.713Z,1478858852.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:33.073Z,1478858853.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:33.099Z,1478858853.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:33.469Z,1478858853.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:33.501Z,1478858853.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:33.869Z,1478858853.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:33.901Z,1478858853.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:34.278Z,1478858854.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:34.303Z,1478858854.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:34.678Z,1478858854.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:34.703Z,1478858854.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:35.069Z,1478858855.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:35.105Z,1478858855.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:35.469Z,1478858855.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:35.497Z,1478858855.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:35.873Z,1478858855.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:35.909Z,1478858855.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:36.269Z,1478858856.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:36.341Z,1478858856.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:36.692Z,1478858856.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:36.721Z,1478858856.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:37.080Z,1478858857.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:37.130Z,1478858857.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:37.474Z,1478858857.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:37.494Z,1478858857.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:37.881Z,1478858857.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:37.935Z,1478858857.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:38.278Z,1478858858.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:38.337Z,1478858858.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:38.672Z,1478858858.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:38.704Z,1478858858.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:39.085Z,1478858859.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:39.100Z,1478858859.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:39.477Z,1478858859.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:39.501Z,1478858859.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:39.869Z,1478858859.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:39.904Z,1478858859.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:40.281Z,1478858860.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:40.301Z,1478858860.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:40.669Z,1478858860.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:40.701Z,1478858860.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:41.088Z,1478858861.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:41.116Z,1478858861.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:41.484Z,1478858861.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:41.516Z,1478858861.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:41.893Z,1478858861.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:41.908Z,1478858861.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:42.280Z,1478858862.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:42.315Z,1478858862.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:42.669Z,1478858862.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:42.705Z,1478858862.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:43.069Z,1478858863.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:43.105Z,1478858863.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:43.470Z,1478858863.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:43.546Z,1478858863.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:43.870Z,1478858863.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:43.914Z,1478858863.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:44.271Z,1478858864.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:44.313Z,1478858864.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:44.678Z,1478858864.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:44.702Z,1478858864.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:45.079Z,1478858865.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:45.099Z,1478858865.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:45.472Z,1478858865.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:45.509Z,1478858865.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:45.872Z,1478858865.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:45.920Z,1478858865.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:46.286Z,1478858866.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:46.326Z,1478858866.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:46.695Z,1478858866.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:46.723Z,1478858866.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:47.076Z,1478858867.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:47.124Z,1478858867.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:47.482Z,1478858867.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:47.512Z,1478858867.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:47.872Z,1478858867.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:47.921Z,1478858867.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:48.279Z,1478858868.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:48.326Z,1478858868.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:48.679Z,1478858868.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:48.703Z,1478858868.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:49.086Z,1478858869.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:49.113Z,1478858869.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:49.472Z,1478858869.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:49.536Z,1478858869.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:49.908Z,1478858869.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:49.940Z,1478858869.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:50.286Z,1478858870.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:50.380Z,1478858870.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:50.691Z,1478858870.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:50.738Z,1478858870.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:51.085Z,1478858871.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:51.130Z,1478858871.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:51.472Z,1478858871.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:51.519Z,1478858871.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:51.878Z,1478858871.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:51.933Z,1478858871.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:52.271Z,1478858872.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:52.348Z,1478858872.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:52.672Z,1478858872.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:52.750Z,1478858872.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:53.080Z,1478858873.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:53.136Z,1478858873.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:53.472Z,1478858873.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:53.491Z,1478858873.491 [BPC1](ERROR): Failed to receive battery data
2016-11-11T10:07:53.491Z,1478858873.491 [BPC1] Communications Fault, FailCount= 1
2016-11-11T10:07:53.491Z,1478858873.491 [BPC1](ERROR): Communications Fault
2016-11-11T10:07:53.508Z,1478858873.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:53.608Z,1478858873.608 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T10:07:53.869Z,1478858873.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:53.893Z,1478858873.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:54.272Z,1478858874.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:54.314Z,1478858874.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:54.670Z,1478858874.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:54.702Z,1478858874.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:54.747Z,1478858874.747 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:07:54.747Z,1478858874.747 [BPC1] No Fault, FailCount= 1
2016-11-11T10:07:55.086Z,1478858875.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:55.209Z,1478858875.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:55.495Z,1478858875.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:55.541Z,1478858875.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:55.872Z,1478858875.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:55.896Z,1478858875.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:56.271Z,1478858876.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:56.305Z,1478858876.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:56.675Z,1478858876.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:56.706Z,1478858876.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:57.070Z,1478858877.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:57.106Z,1478858877.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:57.497Z,1478858877.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:57.512Z,1478858877.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:57.870Z,1478858877.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:57.886Z,1478858877.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:58.284Z,1478858878.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:58.306Z,1478858878.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:58.688Z,1478858878.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:58.709Z,1478858878.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:59.070Z,1478858879.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:59.085Z,1478858879.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:59.473Z,1478858879.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:59.493Z,1478858879.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:07:59.869Z,1478858879.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:07:59.884Z,1478858879.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:00.274Z,1478858880.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:00.289Z,1478858880.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:00.673Z,1478858880.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:00.693Z,1478858880.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:01.069Z,1478858881.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:01.097Z,1478858881.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:01.469Z,1478858881.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:01.489Z,1478858881.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:01.873Z,1478858881.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:01.893Z,1478858881.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:02.269Z,1478858882.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:02.284Z,1478858882.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:02.670Z,1478858882.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:02.686Z,1478858882.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:02.695Z,1478858882.695 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T10:03:02.6Z
2016-11-11T10:08:02.696Z,1478858882.695 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T10:08:02.696Z,1478858882.696 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T10:08:03.070Z,1478858883.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:03.085Z,1478858883.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:21.225Z,1478858901.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:21.237Z,1478858901.237 [BPC1](ERROR): Failed to receive battery data
2016-11-11T10:08:21.237Z,1478858901.237 [BPC1] Communications Fault, FailCount= 2
2016-11-11T10:08:21.237Z,1478858901.237 [BPC1](ERROR): Communications Fault
2016-11-11T10:08:21.261Z,1478858901.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:21.331Z,1478858901.331 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T10:08:21.398Z,1478858901.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:21.437Z,1478858901.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:29.790Z,1478858909.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:29.830Z,1478858909.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:29.965Z,1478858909.965 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0124.lzma
2016-11-11T10:08:30.040Z,1478858910.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:30.068Z,1478858910.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:30.121Z,1478858910.121 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:08:30.121Z,1478858910.121 [BPC1] No Fault, FailCount= 2
2016-11-11T10:08:30.359Z,1478858910.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:30.502Z,1478858910.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:30.721Z,1478858910.721 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0124.lzma.bak
2016-11-11T10:08:30.721Z,1478858910.721 [DataOverHttps](INFO): SBD MOMSN=4555305
2016-11-11T10:08:30.779Z,1478858910.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:30.838Z,1478858910.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:33.058Z,1478858913.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:33.086Z,1478858913.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:33.216Z,1478858913.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:33.260Z,1478858913.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:33.292Z,1478858913.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:34.088Z,1478858914.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:37.580Z,1478858917.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:37.595Z,1478858917.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:37.595Z,1478858917.595 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87
2016-11-11T10:08:37.595Z,1478858917.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:08:37.630Z,1478858917.630 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:37.630Z,1478858917.630 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 87
2016-11-11T10:08:37.630Z,1478858917.630 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:08:37.644Z,1478858917.644 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:37.644Z,1478858917.644 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 87
2016-11-11T10:08:37.644Z,1478858917.644 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:08:37.658Z,1478858917.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:08:37.659Z,1478858917.659 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:08:37.659Z,1478858917.659 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:08:37.718Z,1478858917.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:37.790Z,1478858917.790 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:08:37.790Z,1478858917.790 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87
2016-11-11T10:08:37.795Z,1478858917.795 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:08:37.795Z,1478858917.795 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 87
2016-11-11T10:08:37.796Z,1478858917.796 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:08:37.796Z,1478858917.796 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 87
2016-11-11T10:08:38.127Z,1478858918.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:38.153Z,1478858918.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:08:38.154Z,1478858918.154 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:08:38.154Z,1478858918.154 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:08:38.159Z,1478858918.159 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:08:38.159Z,1478858918.159 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:08:38.159Z,1478858918.159 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:08:38.160Z,1478858918.160 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:08:38.160Z,1478858918.160 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:08:38.161Z,1478858918.161 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:08:38.528Z,1478858918.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:38.557Z,1478858918.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:38.913Z,1478858918.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:38.928Z,1478858918.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:39.308Z,1478858919.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:39.336Z,1478858919.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:42.742Z,1478858922.742 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T10:08:42.772Z,1478858922.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:42.843Z,1478858922.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:42.891Z,1478858922.891 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0125.lzma
2016-11-11T10:08:42.940Z,1478858922.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:42.973Z,1478858922.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:43.317Z,1478858923.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:43.340Z,1478858923.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:43.689Z,1478858923.689 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0125.lzma.bak
2016-11-11T10:08:43.689Z,1478858923.689 [DataOverHttps](INFO): SBD MOMSN=4555307
2016-11-11T10:08:43.718Z,1478858923.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:43.756Z,1478858923.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:45.049Z,1478858925.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:45.101Z,1478858925.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:45.130Z,1478858925.130 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T10:08:45.130Z,1478858925.130 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T10:08:45.130Z,1478858925.130 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T10:08:45.210Z,1478858925.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:45.237Z,1478858925.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:48.561Z,1478858928.561 [NAL9602](INFO): Powering down
2016-11-11T10:08:48.602Z,1478858928.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:48.650Z,1478858928.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:48.746Z,1478858928.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:48.813Z,1478858928.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:49.109Z,1478858929.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:49.161Z,1478858929.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:49.508Z,1478858929.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:49.532Z,1478858929.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:49.908Z,1478858929.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:49.932Z,1478858929.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:50.328Z,1478858930.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:50.377Z,1478858930.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:50.701Z,1478858930.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:50.733Z,1478858930.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:51.101Z,1478858931.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:51.133Z,1478858931.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:51.503Z,1478858931.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:51.533Z,1478858931.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:51.902Z,1478858931.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:51.933Z,1478858931.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:52.349Z,1478858932.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:52.383Z,1478858932.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:52.705Z,1478858932.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:52.748Z,1478858932.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:53.103Z,1478858933.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:53.148Z,1478858933.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:53.505Z,1478858933.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:53.521Z,1478858933.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:53.901Z,1478858933.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:53.921Z,1478858933.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:54.355Z,1478858934.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:54.409Z,1478858934.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:54.710Z,1478858934.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:54.730Z,1478858934.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:55.108Z,1478858935.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:55.129Z,1478858935.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:55.520Z,1478858935.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:55.538Z,1478858935.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:55.905Z,1478858935.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:55.925Z,1478858935.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:56.364Z,1478858936.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:56.423Z,1478858936.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:56.705Z,1478858936.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:56.725Z,1478858936.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:57.105Z,1478858937.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:57.121Z,1478858937.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:57.501Z,1478858937.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:57.521Z,1478858937.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:57.905Z,1478858937.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:57.925Z,1478858937.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:58.301Z,1478858938.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:58.321Z,1478858938.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:58.701Z,1478858938.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:58.721Z,1478858938.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:59.101Z,1478858939.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:59.116Z,1478858939.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:59.505Z,1478858939.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:59.525Z,1478858939.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:08:59.905Z,1478858939.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:08:59.987Z,1478858939.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:00.305Z,1478858940.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:00.320Z,1478858940.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:00.705Z,1478858940.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:00.720Z,1478858940.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:01.101Z,1478858941.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:01.134Z,1478858941.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:01.505Z,1478858941.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:01.520Z,1478858941.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:01.900Z,1478858941.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:01.945Z,1478858941.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:02.305Z,1478858942.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:02.320Z,1478858942.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:02.705Z,1478858942.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:02.755Z,1478858942.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:03.105Z,1478858943.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:03.153Z,1478858943.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:03.505Z,1478858943.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:03.520Z,1478858943.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:03.901Z,1478858943.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:03.921Z,1478858943.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:04.310Z,1478858944.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:04.333Z,1478858944.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:04.701Z,1478858944.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:04.721Z,1478858944.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:05.105Z,1478858945.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:05.120Z,1478858945.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:05.501Z,1478858945.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:05.516Z,1478858945.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:05.912Z,1478858945.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:05.935Z,1478858945.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:06.306Z,1478858946.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:06.332Z,1478858946.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:06.705Z,1478858946.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:06.721Z,1478858946.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:07.109Z,1478858947.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:07.125Z,1478858947.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:07.505Z,1478858947.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:07.525Z,1478858947.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:07.905Z,1478858947.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:07.959Z,1478858947.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:08.310Z,1478858948.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:08.330Z,1478858948.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:08.705Z,1478858948.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:08.725Z,1478858948.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:09.101Z,1478858949.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:09.121Z,1478858949.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:09.501Z,1478858949.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:09.521Z,1478858949.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:09.909Z,1478858949.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:09.929Z,1478858949.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:10.310Z,1478858950.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:10.329Z,1478858950.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:10.701Z,1478858950.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:10.729Z,1478858950.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:11.101Z,1478858951.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:11.121Z,1478858951.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:11.505Z,1478858951.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:11.566Z,1478858951.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:11.905Z,1478858951.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:11.920Z,1478858951.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:12.305Z,1478858952.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:12.325Z,1478858952.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:12.701Z,1478858952.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:12.716Z,1478858952.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:13.105Z,1478858953.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:13.125Z,1478858953.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:13.501Z,1478858953.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:13.521Z,1478858953.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:13.905Z,1478858953.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:13.941Z,1478858953.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:14.301Z,1478858954.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:14.316Z,1478858954.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:14.705Z,1478858954.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:14.729Z,1478858954.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:15.101Z,1478858955.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:15.141Z,1478858955.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:15.505Z,1478858955.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:15.520Z,1478858955.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:15.937Z,1478858955.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:15.965Z,1478858955.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:16.302Z,1478858956.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:16.345Z,1478858956.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:16.701Z,1478858956.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:16.763Z,1478858956.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:17.101Z,1478858957.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:17.145Z,1478858957.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:17.501Z,1478858957.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:17.560Z,1478858957.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:17.901Z,1478858957.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:17.929Z,1478858957.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:18.307Z,1478858958.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:18.350Z,1478858958.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:18.701Z,1478858958.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:18.725Z,1478858958.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:19.101Z,1478858959.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:19.121Z,1478858959.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:19.502Z,1478858959.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:19.530Z,1478858959.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:19.901Z,1478858959.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:19.925Z,1478858959.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:20.304Z,1478858960.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:20.329Z,1478858960.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:20.702Z,1478858960.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:20.729Z,1478858960.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:21.101Z,1478858961.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:21.141Z,1478858961.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:21.501Z,1478858961.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:21.534Z,1478858961.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:21.909Z,1478858961.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:21.943Z,1478858961.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:22.306Z,1478858962.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:22.350Z,1478858962.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:22.701Z,1478858962.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:22.744Z,1478858962.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:23.101Z,1478858963.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:23.145Z,1478858963.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:23.501Z,1478858963.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:23.516Z,1478858963.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:23.905Z,1478858963.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:23.920Z,1478858963.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:24.308Z,1478858964.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:24.344Z,1478858964.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:24.713Z,1478858964.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:24.729Z,1478858964.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:25.109Z,1478858965.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:25.124Z,1478858965.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:25.504Z,1478858965.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:25.532Z,1478858965.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:25.910Z,1478858965.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:25.925Z,1478858965.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:26.316Z,1478858966.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:26.403Z,1478858966.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:26.701Z,1478858966.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:26.721Z,1478858966.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:27.108Z,1478858967.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:27.123Z,1478858967.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:27.505Z,1478858967.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:27.525Z,1478858967.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:27.905Z,1478858967.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:27.921Z,1478858967.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:28.308Z,1478858968.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:28.357Z,1478858968.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:28.739Z,1478858968.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:28.758Z,1478858968.758 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T10:09:28.758Z,1478858968.758 [BPC1] Data Fault, FailCount= 1
2016-11-11T10:09:28.758Z,1478858968.758 [BPC1](ERROR): Data Fault
2016-11-11T10:09:28.812Z,1478858968.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:28.848Z,1478858968.848 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T10:09:29.101Z,1478858969.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:29.122Z,1478858969.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:29.501Z,1478858969.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:29.516Z,1478858969.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:29.906Z,1478858969.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:29.921Z,1478858969.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:29.970Z,1478858969.970 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:09:29.970Z,1478858969.970 [BPC1] No Fault, FailCount= 1
2016-11-11T10:09:30.308Z,1478858970.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:30.391Z,1478858970.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:30.757Z,1478858970.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:30.821Z,1478858970.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:31.107Z,1478858971.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:31.129Z,1478858971.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:31.508Z,1478858971.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:31.523Z,1478858971.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:31.908Z,1478858971.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:31.924Z,1478858971.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:32.314Z,1478858972.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:32.349Z,1478858972.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:32.701Z,1478858972.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:32.733Z,1478858972.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:33.112Z,1478858973.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:33.128Z,1478858973.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:33.502Z,1478858973.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:33.537Z,1478858973.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:33.901Z,1478858973.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:33.935Z,1478858973.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:34.324Z,1478858974.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:34.344Z,1478858974.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:34.701Z,1478858974.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:34.737Z,1478858974.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:35.105Z,1478858975.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:35.130Z,1478858975.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:35.502Z,1478858975.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:35.525Z,1478858975.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:35.901Z,1478858975.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:35.937Z,1478858975.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:36.310Z,1478858976.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:36.350Z,1478858976.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:36.702Z,1478858976.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:36.717Z,1478858976.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:37.101Z,1478858977.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:37.121Z,1478858977.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:37.514Z,1478858977.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:37.529Z,1478858977.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:37.908Z,1478858977.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:37.924Z,1478858977.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:38.317Z,1478858978.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:38.340Z,1478858978.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:38.709Z,1478858978.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:38.737Z,1478858978.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:39.116Z,1478858979.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:39.132Z,1478858979.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:39.502Z,1478858979.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:39.538Z,1478858979.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:39.901Z,1478858979.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:39.926Z,1478858979.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:40.345Z,1478858980.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:40.388Z,1478858980.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:40.701Z,1478858980.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:40.729Z,1478858980.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:41.101Z,1478858981.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:41.133Z,1478858981.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:41.501Z,1478858981.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:41.561Z,1478858981.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:41.905Z,1478858981.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:41.937Z,1478858981.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:42.301Z,1478858982.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:42.333Z,1478858982.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:42.721Z,1478858982.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:42.821Z,1478858982.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:43.101Z,1478858983.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:43.161Z,1478858983.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:43.504Z,1478858983.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:43.525Z,1478858983.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:43.901Z,1478858983.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:43.954Z,1478858983.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:44.304Z,1478858984.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:44.319Z,1478858984.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:44.723Z,1478858984.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:44.766Z,1478858984.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:45.107Z,1478858985.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:45.123Z,1478858985.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:45.508Z,1478858985.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:45.560Z,1478858985.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:48.934Z,1478858988.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:48.959Z,1478858988.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:49.069Z,1478858989.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:49.085Z,1478858989.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:49.418Z,1478858989.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:49.437Z,1478858989.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:49.823Z,1478858989.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:49.839Z,1478858989.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:50.266Z,1478858990.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:50.294Z,1478858990.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:50.624Z,1478858990.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:50.648Z,1478858990.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:51.020Z,1478858991.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:51.043Z,1478858991.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:51.409Z,1478858991.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:51.445Z,1478858991.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:51.809Z,1478858991.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:51.846Z,1478858991.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:52.235Z,1478858992.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:52.282Z,1478858992.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:52.609Z,1478858992.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:52.627Z,1478858992.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:53.015Z,1478858993.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:53.057Z,1478858993.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:53.419Z,1478858993.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:53.435Z,1478858993.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:53.819Z,1478858993.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:53.835Z,1478858993.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:54.209Z,1478858994.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:54.241Z,1478858994.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:54.610Z,1478858994.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:54.669Z,1478858994.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:55.019Z,1478858995.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:55.065Z,1478858995.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:55.419Z,1478858995.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:55.449Z,1478858995.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:55.822Z,1478858995.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:55.837Z,1478858995.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:56.220Z,1478858996.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:56.277Z,1478858996.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:56.609Z,1478858996.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:56.670Z,1478858996.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:57.010Z,1478858997.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:57.028Z,1478858997.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:57.409Z,1478858997.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:57.481Z,1478858997.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:57.822Z,1478858997.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:57.839Z,1478858997.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:58.253Z,1478858998.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:58.287Z,1478858998.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:58.616Z,1478858998.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:58.632Z,1478858998.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:59.025Z,1478858999.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:59.071Z,1478858999.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:59.432Z,1478858999.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:59.447Z,1478858999.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:09:59.845Z,1478858999.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:09:59.905Z,1478858999.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:00.265Z,1478859000.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:00.307Z,1478859000.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:00.609Z,1478859000.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:00.645Z,1478859000.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:01.027Z,1478859001.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:01.048Z,1478859001.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:01.415Z,1478859001.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:01.446Z,1478859001.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:01.809Z,1478859001.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:01.848Z,1478859001.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:02.242Z,1478859002.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:02.294Z,1478859002.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:02.615Z,1478859002.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:02.645Z,1478859002.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:03.009Z,1478859003.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:03.047Z,1478859003.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:03.409Z,1478859003.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:03.438Z,1478859003.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:03.809Z,1478859003.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:03.849Z,1478859003.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:04.221Z,1478859004.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:04.257Z,1478859004.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:04.615Z,1478859004.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:04.631Z,1478859004.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:05.009Z,1478859005.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:05.026Z,1478859005.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:05.414Z,1478859005.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:05.429Z,1478859005.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:05.818Z,1478859005.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:05.834Z,1478859005.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:06.246Z,1478859006.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:06.281Z,1478859006.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:06.621Z,1478859006.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:06.641Z,1478859006.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:07.018Z,1478859007.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:07.034Z,1478859007.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:07.418Z,1478859007.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:07.441Z,1478859007.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:07.823Z,1478859007.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:07.845Z,1478859007.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:08.223Z,1478859008.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:08.238Z,1478859008.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:08.609Z,1478859008.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:08.650Z,1478859008.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:09.009Z,1478859009.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:09.041Z,1478859009.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:09.409Z,1478859009.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:09.427Z,1478859009.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:09.815Z,1478859009.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:09.830Z,1478859009.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:10.209Z,1478859010.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:10.226Z,1478859010.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:10.633Z,1478859010.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:10.701Z,1478859010.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:11.043Z,1478859011.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:11.137Z,1478859011.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:11.425Z,1478859011.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:11.454Z,1478859011.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:11.816Z,1478859011.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:11.842Z,1478859011.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:12.221Z,1478859012.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:12.254Z,1478859012.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:12.609Z,1478859012.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:12.715Z,1478859012.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:13.022Z,1478859013.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:13.038Z,1478859013.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:13.418Z,1478859013.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:13.433Z,1478859013.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:13.824Z,1478859013.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:13.866Z,1478859013.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:14.235Z,1478859014.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:14.294Z,1478859014.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:14.609Z,1478859014.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:14.693Z,1478859014.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:15.009Z,1478859015.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:15.061Z,1478859015.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:15.428Z,1478859015.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:15.449Z,1478859015.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:15.833Z,1478859015.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:15.853Z,1478859015.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:16.246Z,1478859016.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:16.286Z,1478859016.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:16.620Z,1478859016.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:16.650Z,1478859016.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:17.014Z,1478859017.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:17.030Z,1478859017.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:17.422Z,1478859017.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:17.437Z,1478859017.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:17.814Z,1478859017.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:17.846Z,1478859017.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:18.226Z,1478859018.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:18.253Z,1478859018.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:18.609Z,1478859018.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:18.637Z,1478859018.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:19.016Z,1478859019.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:19.048Z,1478859019.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:19.409Z,1478859019.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:19.441Z,1478859019.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:19.809Z,1478859019.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:19.845Z,1478859019.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:20.231Z,1478859020.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:20.305Z,1478859020.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:20.609Z,1478859020.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:20.627Z,1478859020.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:21.016Z,1478859021.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:21.045Z,1478859021.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:21.415Z,1478859021.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:21.430Z,1478859021.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:21.814Z,1478859021.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:21.829Z,1478859021.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:22.214Z,1478859022.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:22.229Z,1478859022.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:22.626Z,1478859022.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:22.641Z,1478859022.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:23.019Z,1478859023.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:23.034Z,1478859023.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:23.422Z,1478859023.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:23.445Z,1478859023.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:23.818Z,1478859023.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:23.837Z,1478859023.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:24.214Z,1478859024.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:24.245Z,1478859024.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:24.627Z,1478859024.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:24.678Z,1478859024.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:25.020Z,1478859025.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:25.051Z,1478859025.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:25.409Z,1478859025.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:25.433Z,1478859025.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:25.809Z,1478859025.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:25.833Z,1478859025.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:26.215Z,1478859026.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:26.230Z,1478859026.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:26.666Z,1478859026.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:26.691Z,1478859026.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:27.021Z,1478859027.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:27.040Z,1478859027.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:27.443Z,1478859027.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:27.501Z,1478859027.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:27.809Z,1478859027.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:27.858Z,1478859027.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:28.216Z,1478859028.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:28.261Z,1478859028.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:28.609Z,1478859028.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:28.655Z,1478859028.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:29.024Z,1478859029.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:29.050Z,1478859029.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:29.409Z,1478859029.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:29.465Z,1478859029.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:29.809Z,1478859029.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:29.857Z,1478859029.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:30.211Z,1478859030.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:30.264Z,1478859030.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:30.610Z,1478859030.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:30.655Z,1478859030.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:31.010Z,1478859031.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:31.061Z,1478859031.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:31.416Z,1478859031.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:31.437Z,1478859031.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:31.827Z,1478859031.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:31.842Z,1478859031.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:32.232Z,1478859032.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:32.280Z,1478859032.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:32.643Z,1478859032.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:32.682Z,1478859032.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:33.019Z,1478859033.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:33.043Z,1478859033.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:33.419Z,1478859033.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:33.435Z,1478859033.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:33.826Z,1478859033.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:33.842Z,1478859033.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:34.211Z,1478859034.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:34.245Z,1478859034.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:34.609Z,1478859034.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:34.646Z,1478859034.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:35.013Z,1478859035.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:35.058Z,1478859035.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:35.409Z,1478859035.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:35.445Z,1478859035.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:35.809Z,1478859035.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:35.845Z,1478859035.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:36.209Z,1478859036.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:36.289Z,1478859036.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:36.609Z,1478859036.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:36.649Z,1478859036.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:37.009Z,1478859037.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:37.026Z,1478859037.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:37.415Z,1478859037.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:37.430Z,1478859037.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:37.814Z,1478859037.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:37.830Z,1478859037.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:38.209Z,1478859038.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:38.238Z,1478859038.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:38.638Z,1478859038.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:38.674Z,1478859038.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:39.017Z,1478859039.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:39.037Z,1478859039.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:39.417Z,1478859039.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:39.433Z,1478859039.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:39.823Z,1478859039.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:39.838Z,1478859039.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:40.214Z,1478859040.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:40.236Z,1478859040.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:40.639Z,1478859040.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:40.684Z,1478859040.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:41.015Z,1478859041.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:41.050Z,1478859041.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:41.409Z,1478859041.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:41.445Z,1478859041.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:41.809Z,1478859041.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:41.839Z,1478859041.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:42.222Z,1478859042.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:42.266Z,1478859042.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:42.609Z,1478859042.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:42.627Z,1478859042.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:43.009Z,1478859043.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:43.027Z,1478859043.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:43.420Z,1478859043.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:43.465Z,1478859043.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:43.849Z,1478859043.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:43.877Z,1478859043.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:44.234Z,1478859044.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:44.289Z,1478859044.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:44.626Z,1478859044.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:44.679Z,1478859044.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:45.015Z,1478859045.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:45.047Z,1478859045.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:45.409Z,1478859045.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:45.449Z,1478859045.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:45.810Z,1478859045.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:45.845Z,1478859045.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:49.323Z,1478859049.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:49.360Z,1478859049.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:49.464Z,1478859049.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:49.511Z,1478859049.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:49.838Z,1478859049.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:49.873Z,1478859049.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:50.272Z,1478859050.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:50.324Z,1478859050.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:50.638Z,1478859050.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:50.662Z,1478859050.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:50.724Z,1478859050.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:51.041Z,1478859051.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:51.077Z,1478859051.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:51.443Z,1478859051.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:51.478Z,1478859051.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:51.520Z,1478859051.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:51.839Z,1478859051.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:51.855Z,1478859051.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:52.239Z,1478859052.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:52.269Z,1478859052.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:52.650Z,1478859052.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:52.701Z,1478859052.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:53.039Z,1478859053.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:53.071Z,1478859053.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:53.439Z,1478859053.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:53.474Z,1478859053.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:53.843Z,1478859053.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:53.869Z,1478859053.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:54.243Z,1478859054.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:54.270Z,1478859054.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:54.641Z,1478859054.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:54.688Z,1478859054.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:55.043Z,1478859055.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:55.078Z,1478859055.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:55.439Z,1478859055.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:55.501Z,1478859055.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:55.837Z,1478859055.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:55.877Z,1478859055.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:56.240Z,1478859056.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:56.269Z,1478859056.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:56.651Z,1478859056.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:56.701Z,1478859056.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:57.047Z,1478859057.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:57.071Z,1478859057.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:57.438Z,1478859057.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:57.474Z,1478859057.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:57.839Z,1478859057.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:57.878Z,1478859057.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:58.249Z,1478859058.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:58.275Z,1478859058.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:58.638Z,1478859058.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:58.678Z,1478859058.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:59.039Z,1478859059.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:59.079Z,1478859059.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:59.438Z,1478859059.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:59.477Z,1478859059.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:10:59.843Z,1478859059.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:10:59.877Z,1478859059.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:00.293Z,1478859060.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:00.337Z,1478859060.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:00.658Z,1478859060.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:00.690Z,1478859060.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:01.048Z,1478859061.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:01.063Z,1478859061.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:01.445Z,1478859061.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:01.465Z,1478859061.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:01.846Z,1478859061.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:01.862Z,1478859061.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:02.260Z,1478859062.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:02.276Z,1478859062.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:02.649Z,1478859062.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:02.665Z,1478859062.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:03.046Z,1478859063.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:03.065Z,1478859063.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:03.453Z,1478859063.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:03.468Z,1478859063.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:03.859Z,1478859063.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:03.875Z,1478859063.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:04.253Z,1478859064.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:04.323Z,1478859064.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:04.637Z,1478859064.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:04.664Z,1478859064.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:04.704Z,1478859064.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:05.051Z,1478859065.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:05.082Z,1478859065.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:05.455Z,1478859065.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:05.475Z,1478859065.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:05.500Z,1478859065.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:05.874Z,1478859065.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:05.901Z,1478859065.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:06.263Z,1478859066.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:06.291Z,1478859066.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:06.642Z,1478859066.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:06.674Z,1478859066.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:07.051Z,1478859067.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:07.073Z,1478859067.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:07.451Z,1478859067.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:07.467Z,1478859067.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:07.853Z,1478859067.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:07.874Z,1478859067.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:08.239Z,1478859068.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:08.266Z,1478859068.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:08.647Z,1478859068.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:08.680Z,1478859068.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:09.047Z,1478859069.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:09.078Z,1478859069.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:09.443Z,1478859069.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:09.475Z,1478859069.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:09.845Z,1478859069.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:09.901Z,1478859069.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:10.239Z,1478859070.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:10.269Z,1478859070.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:10.642Z,1478859070.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:10.677Z,1478859070.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:11.039Z,1478859071.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:11.101Z,1478859071.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:11.439Z,1478859071.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:11.474Z,1478859071.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:11.839Z,1478859071.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:11.875Z,1478859071.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:12.248Z,1478859072.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:12.307Z,1478859072.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:12.648Z,1478859072.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:12.675Z,1478859072.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:13.038Z,1478859073.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:13.089Z,1478859073.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:13.439Z,1478859073.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:13.489Z,1478859073.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:13.839Z,1478859073.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:13.854Z,1478859073.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:14.251Z,1478859074.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:14.287Z,1478859074.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:14.642Z,1478859074.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:14.658Z,1478859074.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:15.046Z,1478859075.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:15.061Z,1478859075.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:15.445Z,1478859075.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:15.465Z,1478859075.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:15.845Z,1478859075.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:15.861Z,1478859075.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:16.255Z,1478859076.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:16.271Z,1478859076.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:16.650Z,1478859076.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:16.665Z,1478859076.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:17.057Z,1478859077.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:17.081Z,1478859077.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:17.437Z,1478859077.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:17.472Z,1478859077.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:17.857Z,1478859077.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:17.877Z,1478859077.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:18.256Z,1478859078.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:18.280Z,1478859078.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:18.645Z,1478859078.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:18.678Z,1478859078.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:19.044Z,1478859079.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:19.081Z,1478859079.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:19.438Z,1478859079.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:19.454Z,1478859079.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:19.843Z,1478859079.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:19.858Z,1478859079.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:20.250Z,1478859080.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:20.265Z,1478859080.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:20.662Z,1478859080.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:20.686Z,1478859080.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:21.057Z,1478859081.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:21.104Z,1478859081.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:21.445Z,1478859081.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:21.461Z,1478859081.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:21.855Z,1478859081.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:21.871Z,1478859081.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:22.255Z,1478859082.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:22.277Z,1478859082.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:22.666Z,1478859082.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:22.686Z,1478859082.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:23.059Z,1478859083.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:23.079Z,1478859083.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:23.443Z,1478859083.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:23.469Z,1478859083.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:23.858Z,1478859083.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:23.874Z,1478859083.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:24.238Z,1478859084.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:24.298Z,1478859084.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:24.642Z,1478859084.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:24.669Z,1478859084.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:25.039Z,1478859085.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:25.054Z,1478859085.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:25.443Z,1478859085.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:25.498Z,1478859085.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:25.849Z,1478859085.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:25.864Z,1478859085.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:26.255Z,1478859086.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:26.271Z,1478859086.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:26.646Z,1478859086.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:26.700Z,1478859086.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:27.053Z,1478859087.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:27.068Z,1478859087.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:27.446Z,1478859087.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:27.486Z,1478859087.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:27.838Z,1478859087.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:27.900Z,1478859087.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:28.259Z,1478859088.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:28.274Z,1478859088.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:28.638Z,1478859088.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:28.673Z,1478859088.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:29.038Z,1478859089.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:29.074Z,1478859089.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:29.439Z,1478859089.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:29.469Z,1478859089.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:29.838Z,1478859089.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:29.873Z,1478859089.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:30.243Z,1478859090.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:30.269Z,1478859090.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:30.643Z,1478859090.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:30.671Z,1478859090.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:31.038Z,1478859091.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:31.073Z,1478859091.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:31.438Z,1478859091.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:31.462Z,1478859091.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:31.839Z,1478859091.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:31.854Z,1478859091.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:32.240Z,1478859092.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:32.269Z,1478859092.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:32.639Z,1478859092.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:32.654Z,1478859092.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:33.043Z,1478859093.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:33.059Z,1478859093.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:33.448Z,1478859093.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:33.462Z,1478859093.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:33.855Z,1478859093.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:33.871Z,1478859093.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:34.266Z,1478859094.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:34.306Z,1478859094.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:34.637Z,1478859094.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:34.670Z,1478859094.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:35.053Z,1478859095.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:35.069Z,1478859095.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:35.448Z,1478859095.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:35.464Z,1478859095.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:35.850Z,1478859095.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:35.877Z,1478859095.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:36.239Z,1478859096.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:36.265Z,1478859096.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:36.662Z,1478859096.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:36.677Z,1478859096.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:37.051Z,1478859097.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:37.073Z,1478859097.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:37.455Z,1478859097.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:37.471Z,1478859097.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:37.861Z,1478859097.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:37.884Z,1478859097.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:38.237Z,1478859098.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:38.281Z,1478859098.281 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:38.281Z,1478859098.281 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88
2016-11-11T10:11:38.281Z,1478859098.281 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:11:38.288Z,1478859098.288 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:38.288Z,1478859098.288 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 88
2016-11-11T10:11:38.288Z,1478859098.288 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:11:38.290Z,1478859098.290 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:38.290Z,1478859098.290 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 88
2016-11-11T10:11:38.290Z,1478859098.290 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:11:38.305Z,1478859098.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:11:38.305Z,1478859098.305 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:11:38.305Z,1478859098.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:11:38.653Z,1478859098.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:38.730Z,1478859098.730 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:11:38.730Z,1478859098.730 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88
2016-11-11T10:11:38.735Z,1478859098.735 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:11:38.735Z,1478859098.735 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 88
2016-11-11T10:11:38.736Z,1478859098.736 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:11:38.736Z,1478859098.736 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 88
2016-11-11T10:11:39.058Z,1478859099.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:39.081Z,1478859099.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:11:39.082Z,1478859099.082 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:11:39.082Z,1478859099.082 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:11:39.087Z,1478859099.087 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:11:39.087Z,1478859099.087 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:11:39.088Z,1478859099.088 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:11:39.088Z,1478859099.088 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:11:39.089Z,1478859099.089 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:11:39.089Z,1478859099.089 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:11:39.478Z,1478859099.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:39.505Z,1478859099.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:39.849Z,1478859099.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:39.864Z,1478859099.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:40.251Z,1478859100.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:40.306Z,1478859100.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:40.648Z,1478859100.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:40.663Z,1478859100.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:41.046Z,1478859101.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:41.062Z,1478859101.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:41.445Z,1478859101.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:41.505Z,1478859101.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:41.838Z,1478859101.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:41.873Z,1478859101.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:42.255Z,1478859102.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:42.305Z,1478859102.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:42.650Z,1478859102.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:42.704Z,1478859102.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:43.038Z,1478859103.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:43.073Z,1478859103.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:43.438Z,1478859103.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:43.474Z,1478859103.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:43.841Z,1478859103.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:43.867Z,1478859103.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:44.247Z,1478859104.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:44.274Z,1478859104.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:44.638Z,1478859104.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:44.673Z,1478859104.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:45.043Z,1478859105.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:45.069Z,1478859105.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:45.439Z,1478859105.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:45.473Z,1478859105.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:45.839Z,1478859105.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:45.867Z,1478859105.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:49.184Z,1478859109.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:49.227Z,1478859109.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:49.310Z,1478859109.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:49.337Z,1478859109.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:49.688Z,1478859109.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:49.704Z,1478859109.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:50.089Z,1478859110.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:50.105Z,1478859110.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:50.540Z,1478859110.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:50.595Z,1478859110.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:50.892Z,1478859110.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:50.907Z,1478859110.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:51.301Z,1478859111.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:51.321Z,1478859111.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:51.685Z,1478859111.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:51.717Z,1478859111.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:52.099Z,1478859112.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:52.118Z,1478859112.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:52.490Z,1478859112.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:52.521Z,1478859112.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:52.885Z,1478859112.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:52.901Z,1478859112.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:53.286Z,1478859113.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:53.333Z,1478859113.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:53.685Z,1478859113.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:53.713Z,1478859113.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:54.100Z,1478859114.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:54.132Z,1478859114.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:54.502Z,1478859114.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:54.521Z,1478859114.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:54.885Z,1478859114.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:54.937Z,1478859114.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:55.286Z,1478859115.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:55.310Z,1478859115.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:55.685Z,1478859115.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:55.745Z,1478859115.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:56.098Z,1478859116.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:56.138Z,1478859116.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:56.491Z,1478859116.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:56.541Z,1478859116.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:56.890Z,1478859116.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:56.935Z,1478859116.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:57.290Z,1478859117.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:57.306Z,1478859117.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:57.686Z,1478859117.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:57.714Z,1478859117.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:58.106Z,1478859118.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:58.122Z,1478859118.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:58.493Z,1478859118.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:58.513Z,1478859118.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:58.892Z,1478859118.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:58.908Z,1478859118.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:59.294Z,1478859119.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:59.317Z,1478859119.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:11:59.685Z,1478859119.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:11:59.711Z,1478859119.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:00.088Z,1478859120.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:00.176Z,1478859120.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:00.485Z,1478859120.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:00.521Z,1478859120.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:00.885Z,1478859120.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:00.914Z,1478859120.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:01.285Z,1478859121.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:01.309Z,1478859121.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:01.685Z,1478859121.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:01.728Z,1478859121.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:02.085Z,1478859122.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:02.125Z,1478859122.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:02.501Z,1478859122.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:02.535Z,1478859122.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:02.888Z,1478859122.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:02.909Z,1478859122.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:03.291Z,1478859123.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:03.307Z,1478859123.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:03.692Z,1478859123.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:03.708Z,1478859123.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:04.095Z,1478859124.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:04.111Z,1478859124.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:04.515Z,1478859124.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:04.568Z,1478859124.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:04.885Z,1478859124.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:04.920Z,1478859124.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:05.285Z,1478859125.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:05.317Z,1478859125.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:05.692Z,1478859125.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:05.724Z,1478859125.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:06.087Z,1478859126.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:06.119Z,1478859126.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:06.485Z,1478859126.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:06.516Z,1478859126.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:06.917Z,1478859126.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:06.938Z,1478859126.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:07.285Z,1478859127.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:07.324Z,1478859127.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:07.685Z,1478859127.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:07.743Z,1478859127.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:08.116Z,1478859128.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:08.138Z,1478859128.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:08.492Z,1478859128.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:08.520Z,1478859128.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:08.885Z,1478859128.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:08.945Z,1478859128.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:09.298Z,1478859129.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:09.313Z,1478859129.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:09.692Z,1478859129.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:09.708Z,1478859129.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:10.098Z,1478859130.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:10.159Z,1478859130.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:10.500Z,1478859130.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:10.521Z,1478859130.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:10.888Z,1478859130.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:10.946Z,1478859130.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:11.292Z,1478859131.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:11.344Z,1478859131.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:11.692Z,1478859131.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:11.716Z,1478859131.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:12.085Z,1478859132.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:12.125Z,1478859132.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:12.485Z,1478859132.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:12.512Z,1478859132.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:12.896Z,1478859132.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:12.917Z,1478859132.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:13.297Z,1478859133.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:13.314Z,1478859133.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:13.686Z,1478859133.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:13.717Z,1478859133.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:14.123Z,1478859134.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:14.157Z,1478859134.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:14.486Z,1478859134.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:14.510Z,1478859134.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:14.891Z,1478859134.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:14.906Z,1478859134.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:15.289Z,1478859135.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:15.305Z,1478859135.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:15.688Z,1478859135.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:15.709Z,1478859135.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:16.092Z,1478859136.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:16.113Z,1478859136.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:16.498Z,1478859136.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:16.535Z,1478859136.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:16.885Z,1478859136.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:16.919Z,1478859136.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:17.285Z,1478859137.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:17.324Z,1478859137.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:17.685Z,1478859137.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:17.705Z,1478859137.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:18.093Z,1478859138.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:18.108Z,1478859138.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:18.498Z,1478859138.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:18.541Z,1478859138.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:18.892Z,1478859138.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:18.908Z,1478859138.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:19.288Z,1478859139.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:19.318Z,1478859139.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:19.692Z,1478859139.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:19.713Z,1478859139.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:20.091Z,1478859140.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:20.113Z,1478859140.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:20.497Z,1478859140.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:20.512Z,1478859140.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:20.885Z,1478859140.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:20.910Z,1478859140.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:21.285Z,1478859141.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:21.319Z,1478859141.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:21.685Z,1478859141.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:21.745Z,1478859141.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:22.093Z,1478859142.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:22.119Z,1478859142.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:22.493Z,1478859142.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:22.518Z,1478859142.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:22.885Z,1478859142.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:22.921Z,1478859142.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:23.285Z,1478859143.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:23.321Z,1478859143.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:23.685Z,1478859143.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:23.745Z,1478859143.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:24.104Z,1478859144.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:24.128Z,1478859144.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:24.485Z,1478859144.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:24.505Z,1478859144.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:24.885Z,1478859144.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:24.938Z,1478859144.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:25.285Z,1478859145.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:25.305Z,1478859145.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:25.688Z,1478859145.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:25.739Z,1478859145.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:26.096Z,1478859146.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:26.141Z,1478859146.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:26.489Z,1478859146.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:26.504Z,1478859146.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:26.896Z,1478859146.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:26.911Z,1478859146.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:27.293Z,1478859147.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:27.308Z,1478859147.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:27.692Z,1478859147.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:27.707Z,1478859147.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:28.116Z,1478859148.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:28.162Z,1478859148.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:28.493Z,1478859148.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:28.508Z,1478859148.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:28.893Z,1478859148.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:28.909Z,1478859148.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:29.293Z,1478859149.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:29.313Z,1478859149.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:29.685Z,1478859149.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:29.718Z,1478859149.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:30.085Z,1478859150.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:30.117Z,1478859150.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:30.489Z,1478859150.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:30.533Z,1478859150.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:30.885Z,1478859150.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:30.900Z,1478859150.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:31.293Z,1478859151.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:31.324Z,1478859151.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:31.685Z,1478859151.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:31.705Z,1478859151.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:32.085Z,1478859152.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:32.100Z,1478859152.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:32.490Z,1478859152.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:32.535Z,1478859152.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:32.896Z,1478859152.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:32.911Z,1478859152.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:33.292Z,1478859153.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:33.307Z,1478859153.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:33.696Z,1478859153.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:33.712Z,1478859153.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:34.085Z,1478859154.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:34.119Z,1478859154.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:34.496Z,1478859154.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:34.512Z,1478859154.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:34.896Z,1478859154.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:34.917Z,1478859154.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:35.285Z,1478859155.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:35.317Z,1478859155.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:35.685Z,1478859155.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:35.711Z,1478859155.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:36.099Z,1478859156.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:36.128Z,1478859156.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:36.489Z,1478859156.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:36.524Z,1478859156.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:36.885Z,1478859156.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:36.933Z,1478859156.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:37.289Z,1478859157.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:37.325Z,1478859157.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:37.685Z,1478859157.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:37.728Z,1478859157.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:38.096Z,1478859158.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:38.122Z,1478859158.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:38.485Z,1478859158.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:38.537Z,1478859158.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:38.885Z,1478859158.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:38.913Z,1478859158.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:39.292Z,1478859159.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:39.339Z,1478859159.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:39.696Z,1478859159.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:39.711Z,1478859159.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:40.100Z,1478859160.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:40.151Z,1478859160.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:40.485Z,1478859160.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:40.535Z,1478859160.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:40.892Z,1478859160.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:40.915Z,1478859160.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:41.296Z,1478859161.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:41.317Z,1478859161.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:41.685Z,1478859161.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:41.727Z,1478859161.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:42.099Z,1478859162.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:42.132Z,1478859162.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:42.488Z,1478859162.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:42.521Z,1478859162.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:42.885Z,1478859162.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:42.918Z,1478859162.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:43.285Z,1478859163.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:43.310Z,1478859163.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:43.700Z,1478859163.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:43.722Z,1478859163.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:44.085Z,1478859164.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:44.114Z,1478859164.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:44.512Z,1478859164.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:44.529Z,1478859164.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:44.887Z,1478859164.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:44.922Z,1478859164.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:45.291Z,1478859165.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:45.306Z,1478859165.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:45.696Z,1478859165.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:45.720Z,1478859165.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:46.103Z,1478859166.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:46.147Z,1478859166.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:53.482Z,1478859173.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:53.585Z,1478859173.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:53.692Z,1478859173.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:53.746Z,1478859173.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:54.080Z,1478859174.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:54.137Z,1478859174.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:54.494Z,1478859174.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:54.522Z,1478859174.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:54.874Z,1478859174.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:54.945Z,1478859174.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:55.275Z,1478859175.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:55.332Z,1478859175.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:55.676Z,1478859175.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:55.691Z,1478859175.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:56.080Z,1478859176.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:56.108Z,1478859176.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:56.480Z,1478859176.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:56.501Z,1478859176.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:56.865Z,1478859176.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:56.885Z,1478859176.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:57.273Z,1478859177.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:57.294Z,1478859177.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:57.672Z,1478859177.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:57.693Z,1478859177.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:58.072Z,1478859178.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:58.087Z,1478859178.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:58.473Z,1478859178.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:58.502Z,1478859178.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:58.866Z,1478859178.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:58.892Z,1478859178.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:58.910Z,1478859178.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:59.285Z,1478859179.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:59.306Z,1478859179.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:12:59.665Z,1478859179.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:59.688Z,1478859179.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:12:59.692Z,1478859179.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:00.073Z,1478859180.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:00.105Z,1478859180.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:00.473Z,1478859180.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:00.504Z,1478859180.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:00.871Z,1478859180.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:00.887Z,1478859180.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:01.274Z,1478859181.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:01.294Z,1478859181.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:01.672Z,1478859181.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:01.694Z,1478859181.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:02.067Z,1478859182.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:02.107Z,1478859182.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:02.478Z,1478859182.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:02.516Z,1478859182.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:02.871Z,1478859182.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:02.926Z,1478859182.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:03.271Z,1478859183.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:03.316Z,1478859183.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:03.675Z,1478859183.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:03.732Z,1478859183.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:04.066Z,1478859184.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:04.104Z,1478859184.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:04.487Z,1478859184.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:04.536Z,1478859184.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:04.874Z,1478859184.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:04.906Z,1478859184.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:05.267Z,1478859185.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:05.329Z,1478859185.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:05.671Z,1478859185.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:05.686Z,1478859185.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:06.073Z,1478859186.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:06.098Z,1478859186.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:06.467Z,1478859186.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:06.530Z,1478859186.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:06.874Z,1478859186.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:06.894Z,1478859186.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:07.267Z,1478859187.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:07.347Z,1478859187.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:07.665Z,1478859187.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:07.693Z,1478859187.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:08.095Z,1478859188.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:08.162Z,1478859188.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:08.467Z,1478859188.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:08.513Z,1478859188.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:08.874Z,1478859188.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:08.923Z,1478859188.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:09.274Z,1478859189.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:09.328Z,1478859189.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:09.674Z,1478859189.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:09.697Z,1478859189.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:10.075Z,1478859190.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:10.108Z,1478859190.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:10.479Z,1478859190.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:10.508Z,1478859190.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:10.867Z,1478859190.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:10.909Z,1478859190.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:11.273Z,1478859191.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:11.303Z,1478859191.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:11.666Z,1478859191.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:11.710Z,1478859191.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:12.074Z,1478859192.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:12.124Z,1478859192.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:12.484Z,1478859192.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:12.527Z,1478859192.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:12.870Z,1478859192.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:12.891Z,1478859192.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:13.272Z,1478859193.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:13.293Z,1478859193.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:13.676Z,1478859193.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:13.692Z,1478859193.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:14.073Z,1478859194.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:14.089Z,1478859194.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:14.479Z,1478859194.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:14.494Z,1478859194.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:14.876Z,1478859194.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:14.896Z,1478859194.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:15.265Z,1478859195.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:15.290Z,1478859195.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:15.665Z,1478859195.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:15.700Z,1478859195.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:16.065Z,1478859196.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:16.090Z,1478859196.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:16.481Z,1478859196.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:16.501Z,1478859196.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:16.865Z,1478859196.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:16.897Z,1478859196.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:17.269Z,1478859197.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:17.301Z,1478859197.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:17.669Z,1478859197.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:17.705Z,1478859197.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:18.073Z,1478859198.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:18.099Z,1478859198.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:18.473Z,1478859198.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:18.499Z,1478859198.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:18.865Z,1478859198.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:18.897Z,1478859198.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:19.265Z,1478859199.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:19.303Z,1478859199.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:19.673Z,1478859199.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:19.699Z,1478859199.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:20.073Z,1478859200.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:20.099Z,1478859200.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:20.465Z,1478859200.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:20.505Z,1478859200.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:20.869Z,1478859200.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:20.934Z,1478859200.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:21.265Z,1478859201.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:21.306Z,1478859201.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:21.665Z,1478859201.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:21.685Z,1478859201.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:22.065Z,1478859202.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:22.117Z,1478859202.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:22.465Z,1478859202.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:22.485Z,1478859202.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:22.870Z,1478859202.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:22.910Z,1478859202.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:23.273Z,1478859203.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:23.329Z,1478859203.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:23.669Z,1478859203.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:23.684Z,1478859203.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:24.081Z,1478859204.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:24.097Z,1478859204.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:24.468Z,1478859204.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:24.502Z,1478859204.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:24.873Z,1478859204.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:24.888Z,1478859204.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:25.228Z,1478859205.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:25.276Z,1478859205.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:25.302Z,1478859205.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:25.668Z,1478859205.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:25.700Z,1478859205.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:26.024Z,1478859206.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:26.066Z,1478859206.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:26.105Z,1478859206.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:26.466Z,1478859206.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:26.502Z,1478859206.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:26.865Z,1478859206.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:26.885Z,1478859206.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:27.268Z,1478859207.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:27.289Z,1478859207.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:27.678Z,1478859207.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:27.722Z,1478859207.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:28.068Z,1478859208.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:28.084Z,1478859208.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:28.472Z,1478859208.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:28.488Z,1478859208.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:28.873Z,1478859208.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:28.898Z,1478859208.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:29.273Z,1478859209.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:29.294Z,1478859209.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:29.672Z,1478859209.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:29.688Z,1478859209.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:30.065Z,1478859210.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:30.090Z,1478859210.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:30.473Z,1478859210.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:30.495Z,1478859210.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:30.890Z,1478859210.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:30.945Z,1478859210.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:31.265Z,1478859211.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:31.290Z,1478859211.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:31.665Z,1478859211.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:31.697Z,1478859211.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:32.065Z,1478859212.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:32.101Z,1478859212.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:32.465Z,1478859212.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:32.501Z,1478859212.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:32.865Z,1478859212.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:32.901Z,1478859212.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:33.269Z,1478859213.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:33.297Z,1478859213.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:33.669Z,1478859213.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:33.705Z,1478859213.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:34.073Z,1478859214.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:34.105Z,1478859214.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:34.470Z,1478859214.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:34.552Z,1478859214.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:34.865Z,1478859214.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:34.880Z,1478859214.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:35.265Z,1478859215.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:35.342Z,1478859215.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:35.672Z,1478859215.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:35.688Z,1478859215.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:36.073Z,1478859216.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:36.093Z,1478859216.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:36.472Z,1478859216.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:36.525Z,1478859216.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:36.871Z,1478859216.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:36.886Z,1478859216.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:37.272Z,1478859217.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:37.323Z,1478859217.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:37.675Z,1478859217.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:37.727Z,1478859217.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:38.065Z,1478859218.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:38.081Z,1478859218.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:38.469Z,1478859218.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:38.484Z,1478859218.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:38.865Z,1478859218.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:38.880Z,1478859218.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:39.269Z,1478859219.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:39.289Z,1478859219.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:39.668Z,1478859219.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:39.689Z,1478859219.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:40.062Z,1478859220.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:40.077Z,1478859220.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:40.469Z,1478859220.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:40.485Z,1478859220.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:40.869Z,1478859220.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:40.889Z,1478859220.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:41.269Z,1478859221.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:41.284Z,1478859221.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:41.665Z,1478859221.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:41.685Z,1478859221.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:42.069Z,1478859222.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:42.084Z,1478859222.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:42.469Z,1478859222.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:42.489Z,1478859222.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:42.869Z,1478859222.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:42.885Z,1478859222.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:43.266Z,1478859223.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:43.301Z,1478859223.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:43.662Z,1478859223.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:43.677Z,1478859223.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:44.078Z,1478859224.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:44.101Z,1478859224.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:44.466Z,1478859224.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:44.501Z,1478859224.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:44.865Z,1478859224.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:44.889Z,1478859224.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:45.266Z,1478859225.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:45.294Z,1478859225.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:45.310Z,1478859225.310 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T10:13:45.311Z,1478859225.311 [Default:CheckIn:C.Wait] Stopped
2016-11-11T10:13:45.315Z,1478859225.315 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T10:13:45.315Z,1478859225.315 [Default:CheckIn:D] Running Loop=1
2016-11-11T10:13:45.665Z,1478859225.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:45.685Z,1478859225.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:45.706Z,1478859225.705 [Default:CheckIn:D] Stopped
2016-11-11T10:13:45.706Z,1478859225.706 [Default:CheckIn:E] Running Loop=1
2016-11-11T10:13:46.065Z,1478859226.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:46.101Z,1478859226.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:46.109Z,1478859226.109 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 323.739909 min 
2016-11-11T10:13:46.110Z,1478859226.110 [Default:CheckIn:E] Stopped
2016-11-11T10:13:46.110Z,1478859226.110 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T10:13:46.110Z,1478859226.110 [Default:CheckIn] Stopped
2016-11-11T10:13:46.110Z,1478859226.110 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T10:13:46.110Z,1478859226.110 [Default:CheckIn](INFO): Running loop #32
2016-11-11T10:13:46.110Z,1478859226.110 [Default:CheckIn] Running Loop=32
2016-11-11T10:13:46.110Z,1478859226.110 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T10:13:46.111Z,1478859226.111 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T10:13:46.474Z,1478859226.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:46.502Z,1478859226.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:50.053Z,1478859230.053 [NAL9602](INFO): Powering up
2016-11-11T10:13:50.071Z,1478859230.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:50.145Z,1478859230.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:50.249Z,1478859230.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:50.273Z,1478859230.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:50.630Z,1478859230.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:50.669Z,1478859230.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:51.029Z,1478859231.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:51.081Z,1478859231.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:51.428Z,1478859231.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:51.444Z,1478859231.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:51.833Z,1478859231.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:51.886Z,1478859231.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:52.232Z,1478859232.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:52.280Z,1478859232.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:52.631Z,1478859232.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:52.646Z,1478859232.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:53.031Z,1478859233.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:53.053Z,1478859233.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:53.434Z,1478859233.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:53.449Z,1478859233.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:53.828Z,1478859233.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:53.852Z,1478859233.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:54.233Z,1478859234.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:54.253Z,1478859234.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:54.625Z,1478859234.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:54.658Z,1478859234.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:55.036Z,1478859235.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:55.079Z,1478859235.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:55.425Z,1478859235.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:55.457Z,1478859235.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:55.825Z,1478859235.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:55.860Z,1478859235.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:56.225Z,1478859236.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:56.257Z,1478859236.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:56.627Z,1478859236.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:56.664Z,1478859236.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:57.025Z,1478859237.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:57.061Z,1478859237.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:57.425Z,1478859237.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:57.461Z,1478859237.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:57.863Z,1478859237.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:57.919Z,1478859237.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:58.232Z,1478859238.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:58.247Z,1478859238.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:58.633Z,1478859238.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:58.648Z,1478859238.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:59.032Z,1478859239.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:59.047Z,1478859239.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:59.432Z,1478859239.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:59.453Z,1478859239.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:13:59.886Z,1478859239.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:13:59.908Z,1478859239.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:00.228Z,1478859240.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:00.251Z,1478859240.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:00.644Z,1478859240.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:00.673Z,1478859240.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:01.013Z,1478859241.013 [NAL9602](INFO): NAL9602 initialized
2016-11-11T10:14:01.030Z,1478859241.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:01.045Z,1478859241.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:01.429Z,1478859241.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:01.449Z,1478859241.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:01.824Z,1478859241.824 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T10:14:01.824Z,1478859241.824 [NAL9602] Data Fault, FailCount= 4
2016-11-11T10:14:01.824Z,1478859241.824 [NAL9602](ERROR): Data Fault
2016-11-11T10:14:01.856Z,1478859241.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:01.888Z,1478859241.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:01.962Z,1478859241.962 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T10:14:02.217Z,1478859242.217 [NAL9602](INFO): Powering down
2016-11-11T10:14:02.234Z,1478859242.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:02.266Z,1478859242.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:02.631Z,1478859242.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:02.664Z,1478859242.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:03.028Z,1478859243.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:03.049Z,1478859243.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:03.085Z,1478859243.085 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T10:14:03.085Z,1478859243.085 [NAL9602] No Fault, FailCount= 4
2016-11-11T10:14:03.433Z,1478859243.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:03.448Z,1478859243.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:03.852Z,1478859243.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:03.874Z,1478859243.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:04.231Z,1478859244.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:04.309Z,1478859244.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:04.635Z,1478859244.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:04.655Z,1478859244.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:05.033Z,1478859245.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:05.089Z,1478859245.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:05.425Z,1478859245.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:05.458Z,1478859245.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:05.833Z,1478859245.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:05.924Z,1478859245.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:06.228Z,1478859246.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:06.277Z,1478859246.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:06.632Z,1478859246.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:06.647Z,1478859246.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:07.027Z,1478859247.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:07.051Z,1478859247.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:07.409Z,1478859247.409 [NAL9602](INFO): Powering up NAL9602
2016-11-11T10:14:07.433Z,1478859247.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:07.461Z,1478859247.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:07.833Z,1478859247.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:07.848Z,1478859247.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:08.232Z,1478859248.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:08.313Z,1478859248.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:08.625Z,1478859248.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:08.645Z,1478859248.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:09.031Z,1478859249.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:09.053Z,1478859249.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:09.429Z,1478859249.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:09.444Z,1478859249.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:09.832Z,1478859249.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:09.848Z,1478859249.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:10.231Z,1478859250.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:10.287Z,1478859250.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:10.632Z,1478859250.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:10.655Z,1478859250.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:11.032Z,1478859251.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:11.054Z,1478859251.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:11.425Z,1478859251.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:11.458Z,1478859251.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:11.844Z,1478859251.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:11.868Z,1478859251.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:12.225Z,1478859252.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:12.259Z,1478859252.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:12.625Z,1478859252.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:12.659Z,1478859252.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:13.029Z,1478859253.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:13.065Z,1478859253.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:13.425Z,1478859253.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:13.457Z,1478859253.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:13.856Z,1478859253.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:13.904Z,1478859253.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:14.236Z,1478859254.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:14.256Z,1478859254.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:14.636Z,1478859254.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:14.655Z,1478859254.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:15.026Z,1478859255.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:15.052Z,1478859255.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:15.430Z,1478859255.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:15.462Z,1478859255.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:15.832Z,1478859255.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:15.882Z,1478859255.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:16.229Z,1478859256.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:16.249Z,1478859256.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:16.630Z,1478859256.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:16.649Z,1478859256.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:17.032Z,1478859257.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:17.053Z,1478859257.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:17.425Z,1478859257.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:17.434Z,1478859257.434 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T10:14:17.434Z,1478859257.434 [BPC1] Data Fault, FailCount= 1
2016-11-11T10:14:17.435Z,1478859257.434 [BPC1](ERROR): Data Fault
2016-11-11T10:14:17.476Z,1478859257.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:17.523Z,1478859257.523 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T10:14:17.833Z,1478859257.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:17.865Z,1478859257.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:18.248Z,1478859258.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:18.264Z,1478859258.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:18.617Z,1478859258.617 [NAL9602](INFO): NAL9602 initialized
2016-11-11T10:14:18.633Z,1478859258.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:18.669Z,1478859258.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:18.701Z,1478859258.701 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:14:18.701Z,1478859258.701 [BPC1] No Fault, FailCount= 1
2016-11-11T10:14:19.029Z,1478859259.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:19.106Z,1478859259.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:19.436Z,1478859259.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:19.482Z,1478859259.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:19.840Z,1478859259.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:19.855Z,1478859259.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:20.248Z,1478859260.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:20.264Z,1478859260.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:20.633Z,1478859260.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:20.659Z,1478859260.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:21.030Z,1478859261.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:21.045Z,1478859261.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:21.436Z,1478859261.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:21.469Z,1478859261.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:21.840Z,1478859261.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:21.873Z,1478859261.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:22.262Z,1478859262.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:22.326Z,1478859262.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:22.625Z,1478859262.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:22.641Z,1478859262.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:23.033Z,1478859263.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:23.069Z,1478859263.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:23.429Z,1478859263.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:23.449Z,1478859263.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:23.829Z,1478859263.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:23.844Z,1478859263.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:24.244Z,1478859264.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:24.297Z,1478859264.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:24.631Z,1478859264.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:24.653Z,1478859264.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:25.033Z,1478859265.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:25.049Z,1478859265.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:25.436Z,1478859265.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:25.452Z,1478859265.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:25.848Z,1478859265.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:25.863Z,1478859265.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:26.226Z,1478859266.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:26.249Z,1478859266.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:26.629Z,1478859266.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:26.661Z,1478859266.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:27.029Z,1478859267.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:27.065Z,1478859267.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:27.426Z,1478859267.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:27.441Z,1478859267.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:27.840Z,1478859267.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:27.870Z,1478859267.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:28.237Z,1478859268.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:28.264Z,1478859268.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:28.626Z,1478859268.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:28.641Z,1478859268.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:29.033Z,1478859269.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:29.049Z,1478859269.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:29.433Z,1478859269.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:29.448Z,1478859269.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:29.836Z,1478859269.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:29.876Z,1478859269.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:30.210Z,1478859270.210 [NAL9602](INFO): SBD MO Status=0, MOMSN=341, MT Status=0, MTMSN=0
2016-11-11T10:14:30.210Z,1478859270.210 [NAL9602](INFO): No messages in MT queue
2016-11-11T10:14:30.227Z,1478859270.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:30.261Z,1478859270.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:30.625Z,1478859270.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:30.657Z,1478859270.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:31.047Z,1478859271.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:31.062Z,1478859271.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:31.444Z,1478859271.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:31.472Z,1478859271.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:31.843Z,1478859271.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:31.924Z,1478859271.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:32.225Z,1478859272.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:32.265Z,1478859272.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:32.625Z,1478859272.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:32.681Z,1478859272.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:33.026Z,1478859273.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:33.045Z,1478859273.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:33.432Z,1478859273.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:33.484Z,1478859273.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:33.860Z,1478859273.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:33.929Z,1478859273.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:34.250Z,1478859274.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:34.265Z,1478859274.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:34.648Z,1478859274.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:34.668Z,1478859274.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:35.030Z,1478859275.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:35.062Z,1478859275.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:35.429Z,1478859275.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:35.444Z,1478859275.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:35.840Z,1478859275.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:35.876Z,1478859275.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:36.281Z,1478859276.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:36.338Z,1478859276.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:36.636Z,1478859276.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:36.657Z,1478859276.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:37.026Z,1478859277.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:37.062Z,1478859277.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:37.430Z,1478859277.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:37.455Z,1478859277.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:37.848Z,1478859277.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:37.869Z,1478859277.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:38.254Z,1478859278.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:38.303Z,1478859278.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:38.648Z,1478859278.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:38.672Z,1478859278.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:39.031Z,1478859279.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:39.053Z,1478859279.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:39.430Z,1478859279.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:39.446Z,1478859279.446 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:39.446Z,1478859279.446 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89
2016-11-11T10:14:39.446Z,1478859279.446 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:14:39.453Z,1478859279.453 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:39.453Z,1478859279.453 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 89
2016-11-11T10:14:39.453Z,1478859279.453 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:14:39.455Z,1478859279.455 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:39.456Z,1478859279.455 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 89
2016-11-11T10:14:39.456Z,1478859279.456 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:14:39.486Z,1478859279.486 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:14:39.486Z,1478859279.487 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:14:39.487Z,1478859279.487 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:14:39.833Z,1478859279.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:39.894Z,1478859279.894 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:14:39.895Z,1478859279.895 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89
2016-11-11T10:14:39.899Z,1478859279.899 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:14:39.900Z,1478859279.899 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 89
2016-11-11T10:14:39.900Z,1478859279.900 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:14:39.900Z,1478859279.900 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 89
2016-11-11T10:14:40.233Z,1478859280.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:40.254Z,1478859280.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:14:40.255Z,1478859280.255 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:14:40.255Z,1478859280.255 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:14:40.260Z,1478859280.260 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:14:40.261Z,1478859280.260 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:14:40.261Z,1478859280.261 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:14:40.261Z,1478859280.261 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:14:40.262Z,1478859280.262 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:14:40.262Z,1478859280.262 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:14:40.625Z,1478859280.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:40.657Z,1478859280.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:41.044Z,1478859281.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:41.068Z,1478859281.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:41.448Z,1478859281.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:41.463Z,1478859281.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:41.844Z,1478859281.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:41.873Z,1478859281.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:42.233Z,1478859282.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:42.253Z,1478859282.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:42.633Z,1478859282.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:42.648Z,1478859282.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:43.033Z,1478859283.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:43.049Z,1478859283.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:43.437Z,1478859283.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:43.457Z,1478859283.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:43.842Z,1478859283.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:43.869Z,1478859283.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:44.248Z,1478859284.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:44.264Z,1478859284.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:44.640Z,1478859284.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:44.658Z,1478859284.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:45.030Z,1478859285.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:45.057Z,1478859285.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:45.425Z,1478859285.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:45.485Z,1478859285.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:45.836Z,1478859285.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:45.870Z,1478859285.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:46.240Z,1478859286.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:46.293Z,1478859286.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:46.644Z,1478859286.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:46.681Z,1478859286.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:50.144Z,1478859290.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:50.230Z,1478859290.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:50.349Z,1478859290.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:50.389Z,1478859290.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:50.760Z,1478859290.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:50.798Z,1478859290.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:51.164Z,1478859291.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:51.234Z,1478859291.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:51.560Z,1478859291.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:51.591Z,1478859291.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:51.942Z,1478859291.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:51.969Z,1478859291.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:52.360Z,1478859292.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:52.381Z,1478859292.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:52.753Z,1478859292.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:52.773Z,1478859292.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:53.184Z,1478859293.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:53.216Z,1478859293.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:53.559Z,1478859293.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:53.574Z,1478859293.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:53.963Z,1478859293.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:53.979Z,1478859293.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:54.360Z,1478859294.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:54.381Z,1478859294.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:54.760Z,1478859294.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:54.802Z,1478859294.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:55.152Z,1478859295.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:55.185Z,1478859295.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:55.542Z,1478859295.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:55.557Z,1478859295.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:55.960Z,1478859295.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:55.987Z,1478859295.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:56.352Z,1478859296.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:56.379Z,1478859296.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:56.760Z,1478859296.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:56.792Z,1478859296.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:57.144Z,1478859297.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:57.159Z,1478859297.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:57.544Z,1478859297.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:57.560Z,1478859297.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:57.944Z,1478859297.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:57.964Z,1478859297.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:58.340Z,1478859298.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:58.363Z,1478859298.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:58.745Z,1478859298.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:58.767Z,1478859298.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:59.160Z,1478859299.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:59.176Z,1478859299.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:59.559Z,1478859299.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:59.575Z,1478859299.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:14:59.952Z,1478859299.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:14:59.968Z,1478859299.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:00.342Z,1478859300.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:00.406Z,1478859300.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:00.742Z,1478859300.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:00.762Z,1478859300.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:01.142Z,1478859301.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:01.170Z,1478859301.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:01.549Z,1478859301.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:01.568Z,1478859301.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:01.954Z,1478859301.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:01.970Z,1478859301.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:02.360Z,1478859302.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:02.376Z,1478859302.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:02.759Z,1478859302.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:02.779Z,1478859302.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:03.137Z,1478859303.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:03.209Z,1478859303.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:03.537Z,1478859303.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:03.577Z,1478859303.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:03.939Z,1478859303.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:03.991Z,1478859303.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:04.351Z,1478859304.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:04.366Z,1478859304.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:04.747Z,1478859304.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:04.795Z,1478859304.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:05.160Z,1478859305.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:05.205Z,1478859305.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:05.560Z,1478859305.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:05.592Z,1478859305.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:05.972Z,1478859305.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:06.006Z,1478859306.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:06.360Z,1478859306.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:06.376Z,1478859306.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:06.750Z,1478859306.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:06.765Z,1478859306.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:07.149Z,1478859307.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:07.169Z,1478859307.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:07.549Z,1478859307.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:07.570Z,1478859307.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:07.953Z,1478859307.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:07.969Z,1478859307.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:08.361Z,1478859308.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:08.376Z,1478859308.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:08.761Z,1478859308.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:08.776Z,1478859308.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:09.160Z,1478859309.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:09.189Z,1478859309.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:09.545Z,1478859309.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:09.573Z,1478859309.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:09.979Z,1478859309.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:10.025Z,1478859310.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:10.339Z,1478859310.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:10.354Z,1478859310.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:10.749Z,1478859310.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:10.777Z,1478859310.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:11.163Z,1478859311.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:11.191Z,1478859311.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:11.593Z,1478859311.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:11.640Z,1478859311.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:11.964Z,1478859311.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:11.988Z,1478859311.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:12.340Z,1478859312.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:12.359Z,1478859312.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:12.748Z,1478859312.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:12.764Z,1478859312.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:13.149Z,1478859313.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:13.164Z,1478859313.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:13.551Z,1478859313.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:13.567Z,1478859313.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:13.937Z,1478859313.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:13.963Z,1478859313.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:14.352Z,1478859314.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:14.373Z,1478859314.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:14.760Z,1478859314.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:14.775Z,1478859314.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:15.152Z,1478859315.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:15.177Z,1478859315.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:15.537Z,1478859315.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:15.574Z,1478859315.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:15.937Z,1478859315.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:15.974Z,1478859315.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:16.343Z,1478859316.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:16.378Z,1478859316.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:16.737Z,1478859316.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:16.777Z,1478859316.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:17.152Z,1478859317.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:17.246Z,1478859317.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:17.556Z,1478859317.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:17.591Z,1478859317.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:17.956Z,1478859317.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:18.027Z,1478859318.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:18.341Z,1478859318.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:18.361Z,1478859318.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:18.741Z,1478859318.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:18.797Z,1478859318.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:19.141Z,1478859319.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:19.197Z,1478859319.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:19.551Z,1478859319.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:19.566Z,1478859319.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:19.944Z,1478859319.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:19.966Z,1478859319.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:20.354Z,1478859320.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:20.370Z,1478859320.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:20.759Z,1478859320.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:20.775Z,1478859320.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:21.152Z,1478859321.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:21.180Z,1478859321.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:21.537Z,1478859321.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:21.569Z,1478859321.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:21.937Z,1478859321.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:21.974Z,1478859321.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:22.343Z,1478859322.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:22.376Z,1478859322.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:22.789Z,1478859322.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:22.831Z,1478859322.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:23.172Z,1478859323.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:23.188Z,1478859323.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:23.564Z,1478859323.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:23.580Z,1478859323.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:23.976Z,1478859323.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:23.992Z,1478859323.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:24.345Z,1478859324.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:24.389Z,1478859324.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:24.741Z,1478859324.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:24.761Z,1478859324.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:25.141Z,1478859325.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:25.156Z,1478859325.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:25.546Z,1478859325.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:25.565Z,1478859325.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:25.950Z,1478859325.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:25.982Z,1478859325.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:26.380Z,1478859326.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:26.411Z,1478859326.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:26.760Z,1478859326.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:26.775Z,1478859326.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:27.162Z,1478859327.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:27.185Z,1478859327.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:27.553Z,1478859327.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:27.581Z,1478859327.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:27.968Z,1478859327.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:27.993Z,1478859327.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:28.343Z,1478859328.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:28.366Z,1478859328.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:28.737Z,1478859328.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:28.757Z,1478859328.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:29.160Z,1478859329.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:29.193Z,1478859329.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:29.571Z,1478859329.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:29.587Z,1478859329.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:29.960Z,1478859329.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:29.985Z,1478859329.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:30.349Z,1478859330.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:30.391Z,1478859330.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:30.742Z,1478859330.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:30.761Z,1478859330.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:31.145Z,1478859331.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:31.217Z,1478859331.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:31.547Z,1478859331.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:31.562Z,1478859331.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:31.948Z,1478859331.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:32.001Z,1478859332.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:32.350Z,1478859332.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:32.370Z,1478859332.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:32.755Z,1478859332.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:32.801Z,1478859332.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:33.154Z,1478859333.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:33.201Z,1478859333.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:33.537Z,1478859333.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:33.569Z,1478859333.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:33.949Z,1478859333.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:33.968Z,1478859333.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:34.338Z,1478859334.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:34.364Z,1478859334.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:34.744Z,1478859334.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:34.776Z,1478859334.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:35.164Z,1478859335.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:35.179Z,1478859335.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:35.564Z,1478859335.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:35.585Z,1478859335.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:35.948Z,1478859335.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:35.963Z,1478859335.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:36.346Z,1478859336.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:36.361Z,1478859336.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:36.749Z,1478859336.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:36.764Z,1478859336.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:37.146Z,1478859337.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:37.165Z,1478859337.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:37.547Z,1478859337.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:37.562Z,1478859337.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:37.940Z,1478859337.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:37.964Z,1478859337.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:38.355Z,1478859338.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:38.371Z,1478859338.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:38.760Z,1478859338.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:38.775Z,1478859338.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:39.156Z,1478859339.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:39.184Z,1478859339.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:39.577Z,1478859339.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:39.617Z,1478859339.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:39.958Z,1478859339.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:39.997Z,1478859339.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:40.351Z,1478859340.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:40.366Z,1478859340.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:40.748Z,1478859340.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:40.764Z,1478859340.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:41.156Z,1478859341.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:41.177Z,1478859341.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:41.560Z,1478859341.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:41.576Z,1478859341.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:41.956Z,1478859341.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:41.987Z,1478859341.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:42.338Z,1478859342.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:42.369Z,1478859342.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:42.749Z,1478859342.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:42.776Z,1478859342.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:43.145Z,1478859343.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:43.173Z,1478859343.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:43.586Z,1478859343.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:43.608Z,1478859343.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:43.950Z,1478859343.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:43.966Z,1478859343.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:44.356Z,1478859344.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:44.372Z,1478859344.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:44.768Z,1478859344.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:44.803Z,1478859344.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:45.176Z,1478859345.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:45.269Z,1478859345.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:45.558Z,1478859345.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:45.573Z,1478859345.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:45.952Z,1478859345.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:46.006Z,1478859346.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:46.342Z,1478859346.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:46.376Z,1478859346.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:46.742Z,1478859346.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:46.789Z,1478859346.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:50.192Z,1478859350.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:50.245Z,1478859350.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:50.363Z,1478859350.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:50.397Z,1478859350.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:50.736Z,1478859350.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:50.757Z,1478859350.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:51.128Z,1478859351.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:51.160Z,1478859351.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:51.524Z,1478859351.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:51.558Z,1478859351.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:51.923Z,1478859351.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:51.939Z,1478859351.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:52.332Z,1478859352.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:52.347Z,1478859352.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:52.731Z,1478859352.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:52.746Z,1478859352.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:53.132Z,1478859353.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:53.153Z,1478859353.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:53.536Z,1478859353.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:53.551Z,1478859353.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:53.607Z,1478859353.606 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T10:15:53.944Z,1478859353.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:53.960Z,1478859353.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:54.325Z,1478859354.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:54.361Z,1478859354.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:54.733Z,1478859354.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:54.748Z,1478859354.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:55.124Z,1478859355.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:55.159Z,1478859355.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:55.524Z,1478859355.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:55.549Z,1478859355.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:55.927Z,1478859355.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:55.962Z,1478859355.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:56.352Z,1478859356.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:56.381Z,1478859356.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:56.736Z,1478859356.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:56.773Z,1478859356.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:57.140Z,1478859357.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:57.173Z,1478859357.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:57.526Z,1478859357.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:57.569Z,1478859357.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:57.937Z,1478859357.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:57.971Z,1478859357.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:58.330Z,1478859358.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:58.357Z,1478859358.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:58.725Z,1478859358.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:58.753Z,1478859358.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:58.988Z,1478859358.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:59.139Z,1478859359.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:59.155Z,1478859359.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:59.548Z,1478859359.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:59.563Z,1478859359.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:15:59.786Z,1478859359.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:59.954Z,1478859359.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:15:59.970Z,1478859359.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:00.365Z,1478859360.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:00.409Z,1478859360.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:00.723Z,1478859360.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:00.762Z,1478859360.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:01.131Z,1478859361.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:01.161Z,1478859361.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:01.539Z,1478859361.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:01.571Z,1478859361.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:01.944Z,1478859361.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:01.995Z,1478859361.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:02.335Z,1478859362.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:02.417Z,1478859362.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:02.744Z,1478859362.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:02.780Z,1478859362.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:03.141Z,1478859363.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:03.190Z,1478859363.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:03.535Z,1478859363.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:03.550Z,1478859363.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:03.933Z,1478859363.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:03.984Z,1478859363.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:04.334Z,1478859364.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:04.390Z,1478859364.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:04.732Z,1478859364.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:04.752Z,1478859364.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:05.142Z,1478859365.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:05.165Z,1478859365.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:05.544Z,1478859365.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:05.565Z,1478859365.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:05.932Z,1478859365.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:05.960Z,1478859365.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:06.331Z,1478859366.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:06.346Z,1478859366.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:06.732Z,1478859366.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:06.746Z,1478859366.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:07.131Z,1478859367.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:07.146Z,1478859367.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:07.533Z,1478859367.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:07.562Z,1478859367.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:07.923Z,1478859367.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:07.958Z,1478859367.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:08.344Z,1478859368.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:08.359Z,1478859368.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:08.752Z,1478859368.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:08.776Z,1478859368.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:09.145Z,1478859369.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:09.160Z,1478859369.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:09.524Z,1478859369.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:09.582Z,1478859369.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:09.938Z,1478859369.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:09.958Z,1478859369.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:10.324Z,1478859370.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:10.360Z,1478859370.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:10.728Z,1478859370.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:10.763Z,1478859370.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:11.132Z,1478859371.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:11.173Z,1478859371.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:11.545Z,1478859371.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:11.561Z,1478859371.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:11.952Z,1478859371.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:11.969Z,1478859371.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:12.327Z,1478859372.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:12.356Z,1478859372.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:12.732Z,1478859372.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:12.768Z,1478859372.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:12.960Z,1478859372.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:13.138Z,1478859373.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:13.177Z,1478859373.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:13.538Z,1478859373.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:13.580Z,1478859373.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:13.756Z,1478859373.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:13.933Z,1478859373.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:13.969Z,1478859373.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:14.352Z,1478859374.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:14.386Z,1478859374.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:14.743Z,1478859374.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:14.758Z,1478859374.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:15.144Z,1478859375.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:15.169Z,1478859375.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:15.536Z,1478859375.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:15.554Z,1478859375.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:15.928Z,1478859375.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:15.964Z,1478859375.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:16.332Z,1478859376.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:16.418Z,1478859376.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:16.736Z,1478859376.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:16.770Z,1478859376.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:17.140Z,1478859377.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:17.195Z,1478859377.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:17.540Z,1478859377.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:17.555Z,1478859377.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:17.938Z,1478859377.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:17.989Z,1478859377.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:18.342Z,1478859378.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:18.393Z,1478859378.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:18.749Z,1478859378.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:18.780Z,1478859378.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:19.141Z,1478859379.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:19.172Z,1478859379.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:19.528Z,1478859379.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:19.547Z,1478859379.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:19.936Z,1478859379.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:19.965Z,1478859379.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:20.340Z,1478859380.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:20.368Z,1478859380.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:20.736Z,1478859380.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:20.760Z,1478859380.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:21.124Z,1478859381.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:21.159Z,1478859381.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:21.524Z,1478859381.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:21.568Z,1478859381.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:21.932Z,1478859381.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:21.969Z,1478859381.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:22.333Z,1478859382.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:22.348Z,1478859382.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:22.727Z,1478859382.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:22.756Z,1478859382.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:23.134Z,1478859383.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:23.161Z,1478859383.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:23.544Z,1478859383.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:23.565Z,1478859383.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:23.932Z,1478859383.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:23.964Z,1478859383.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:24.324Z,1478859384.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:24.345Z,1478859384.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:24.732Z,1478859384.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:24.748Z,1478859384.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:25.131Z,1478859385.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:25.151Z,1478859385.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:25.524Z,1478859385.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:25.561Z,1478859385.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:25.939Z,1478859385.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:25.973Z,1478859385.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:26.340Z,1478859386.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:26.374Z,1478859386.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:26.732Z,1478859386.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:26.765Z,1478859386.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:26.942Z,1478859386.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:27.124Z,1478859387.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:27.165Z,1478859387.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:27.524Z,1478859387.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:27.571Z,1478859387.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:27.736Z,1478859387.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:27.924Z,1478859387.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:27.940Z,1478859387.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:28.325Z,1478859388.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:28.345Z,1478859388.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:28.731Z,1478859388.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:28.746Z,1478859388.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:29.144Z,1478859389.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:29.182Z,1478859389.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:29.541Z,1478859389.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:29.578Z,1478859389.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:29.944Z,1478859389.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:29.980Z,1478859389.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:30.338Z,1478859390.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:30.381Z,1478859390.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:30.728Z,1478859390.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:30.813Z,1478859390.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:31.129Z,1478859391.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:31.154Z,1478859391.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:31.532Z,1478859391.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:31.613Z,1478859391.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:31.945Z,1478859391.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:31.965Z,1478859391.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:32.345Z,1478859392.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:32.400Z,1478859392.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:32.741Z,1478859392.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:32.795Z,1478859392.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:33.131Z,1478859393.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:33.175Z,1478859393.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:33.532Z,1478859393.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:33.609Z,1478859393.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:33.948Z,1478859393.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:33.985Z,1478859393.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:34.331Z,1478859394.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:34.350Z,1478859394.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:34.732Z,1478859394.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:34.758Z,1478859394.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:35.147Z,1478859395.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:35.166Z,1478859395.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:35.562Z,1478859395.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:35.619Z,1478859395.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:35.934Z,1478859395.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:35.969Z,1478859395.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:36.324Z,1478859396.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:36.350Z,1478859396.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:36.727Z,1478859396.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:36.773Z,1478859396.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:37.121Z,1478859397.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:37.137Z,1478859397.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:37.528Z,1478859397.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:37.606Z,1478859397.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:37.934Z,1478859397.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:37.967Z,1478859397.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:38.336Z,1478859398.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:38.370Z,1478859398.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:38.737Z,1478859398.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:38.755Z,1478859398.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:39.139Z,1478859399.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:39.157Z,1478859399.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:39.525Z,1478859399.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:39.550Z,1478859399.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:39.938Z,1478859399.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:39.961Z,1478859399.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:40.340Z,1478859400.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:40.361Z,1478859400.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:40.725Z,1478859400.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:40.758Z,1478859400.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:41.140Z,1478859401.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:41.173Z,1478859401.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:41.544Z,1478859401.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:41.576Z,1478859401.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:41.946Z,1478859401.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:41.962Z,1478859401.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:42.336Z,1478859402.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:42.364Z,1478859402.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:42.733Z,1478859402.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:42.761Z,1478859402.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:43.132Z,1478859403.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:43.154Z,1478859403.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:43.524Z,1478859403.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:43.544Z,1478859403.543 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T10:16:43.544Z,1478859403.544 [BPC1] Data Fault, FailCount= 1
2016-11-11T10:16:43.544Z,1478859403.544 [BPC1](ERROR): Data Fault
2016-11-11T10:16:43.566Z,1478859403.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:43.606Z,1478859403.606 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T10:16:43.926Z,1478859403.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:43.961Z,1478859403.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:44.332Z,1478859404.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:44.365Z,1478859404.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:44.742Z,1478859404.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:44.774Z,1478859404.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:44.811Z,1478859404.811 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:16:44.811Z,1478859404.811 [BPC1] No Fault, FailCount= 1
2016-11-11T10:16:45.145Z,1478859405.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:45.222Z,1478859405.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:45.534Z,1478859405.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:45.618Z,1478859405.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:45.927Z,1478859405.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:45.965Z,1478859405.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:46.340Z,1478859406.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:46.356Z,1478859406.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:46.756Z,1478859406.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:46.798Z,1478859406.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:47.156Z,1478859407.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:47.173Z,1478859407.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:50.603Z,1478859410.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:50.618Z,1478859410.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:50.749Z,1478859410.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:50.776Z,1478859410.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:51.097Z,1478859411.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:51.139Z,1478859411.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:51.498Z,1478859411.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:51.562Z,1478859411.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:51.893Z,1478859411.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:51.932Z,1478859411.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:52.299Z,1478859412.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:52.357Z,1478859412.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:52.686Z,1478859412.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:52.701Z,1478859412.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:53.100Z,1478859413.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:53.133Z,1478859413.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:53.510Z,1478859413.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:53.549Z,1478859413.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:53.896Z,1478859413.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:53.934Z,1478859413.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:54.289Z,1478859414.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:54.335Z,1478859414.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:54.688Z,1478859414.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:54.718Z,1478859414.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:55.087Z,1478859415.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:55.121Z,1478859415.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:55.488Z,1478859415.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:55.526Z,1478859415.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:55.885Z,1478859415.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:55.918Z,1478859415.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:56.297Z,1478859416.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:56.334Z,1478859416.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:56.713Z,1478859416.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:56.738Z,1478859416.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:57.105Z,1478859417.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:57.145Z,1478859417.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:57.489Z,1478859417.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:57.538Z,1478859417.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:57.888Z,1478859417.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:57.957Z,1478859417.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:58.286Z,1478859418.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:58.316Z,1478859418.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:58.690Z,1478859418.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:58.741Z,1478859418.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:59.100Z,1478859419.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:59.144Z,1478859419.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:59.505Z,1478859419.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:59.582Z,1478859419.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:16:59.902Z,1478859419.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:16:59.942Z,1478859419.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:00.290Z,1478859420.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:00.353Z,1478859420.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:00.693Z,1478859420.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:00.727Z,1478859420.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:01.093Z,1478859421.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:01.123Z,1478859421.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:01.487Z,1478859421.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:01.569Z,1478859421.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:01.893Z,1478859421.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:01.932Z,1478859421.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:02.300Z,1478859422.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:02.344Z,1478859422.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:02.706Z,1478859422.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:02.733Z,1478859422.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:03.120Z,1478859423.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:03.140Z,1478859423.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:03.492Z,1478859423.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:03.597Z,1478859423.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:03.894Z,1478859423.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:03.924Z,1478859423.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:04.287Z,1478859424.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:04.330Z,1478859424.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:04.686Z,1478859424.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:04.719Z,1478859424.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:05.100Z,1478859425.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:05.137Z,1478859425.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:05.541Z,1478859425.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:05.589Z,1478859425.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:05.919Z,1478859425.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:05.952Z,1478859425.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:06.286Z,1478859426.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:06.303Z,1478859426.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:06.696Z,1478859426.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:06.745Z,1478859426.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:07.092Z,1478859427.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:07.157Z,1478859427.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:07.487Z,1478859427.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:07.506Z,1478859427.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:07.900Z,1478859427.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:07.939Z,1478859427.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:08.304Z,1478859428.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:08.342Z,1478859428.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:08.702Z,1478859428.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:08.757Z,1478859428.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:09.099Z,1478859429.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:09.123Z,1478859429.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:09.496Z,1478859429.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:09.524Z,1478859429.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:09.896Z,1478859429.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:09.933Z,1478859429.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:10.300Z,1478859430.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:10.337Z,1478859430.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:10.690Z,1478859430.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:10.707Z,1478859430.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:11.108Z,1478859431.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:11.144Z,1478859431.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:11.510Z,1478859431.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:11.538Z,1478859431.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:11.906Z,1478859431.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:11.940Z,1478859431.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:12.296Z,1478859432.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:12.314Z,1478859432.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:12.697Z,1478859432.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:12.757Z,1478859432.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:13.092Z,1478859433.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:13.139Z,1478859433.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:13.495Z,1478859433.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:13.601Z,1478859433.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:13.892Z,1478859433.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:13.921Z,1478859433.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:14.302Z,1478859434.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:14.353Z,1478859434.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:14.703Z,1478859434.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:14.753Z,1478859434.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:15.102Z,1478859435.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:15.120Z,1478859435.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:15.533Z,1478859435.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:15.580Z,1478859435.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:15.892Z,1478859435.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:15.918Z,1478859435.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:16.303Z,1478859436.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:16.326Z,1478859436.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:16.686Z,1478859436.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:16.717Z,1478859436.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:17.104Z,1478859437.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:17.122Z,1478859437.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:17.525Z,1478859437.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:17.589Z,1478859437.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:17.906Z,1478859437.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:17.940Z,1478859437.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:18.290Z,1478859438.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:18.306Z,1478859438.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:18.695Z,1478859438.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:18.713Z,1478859438.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:19.095Z,1478859439.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:19.110Z,1478859439.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:19.522Z,1478859439.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:19.586Z,1478859439.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:19.891Z,1478859439.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:19.957Z,1478859439.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:20.296Z,1478859440.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:20.350Z,1478859440.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:20.704Z,1478859440.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:20.731Z,1478859440.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:21.117Z,1478859441.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:21.137Z,1478859441.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:21.488Z,1478859441.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:21.528Z,1478859441.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:21.895Z,1478859441.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:21.911Z,1478859441.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:22.297Z,1478859442.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:22.316Z,1478859442.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:22.697Z,1478859442.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:22.733Z,1478859442.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:23.100Z,1478859443.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:23.143Z,1478859443.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:23.504Z,1478859443.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:23.563Z,1478859443.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:23.904Z,1478859443.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:23.937Z,1478859443.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:24.302Z,1478859444.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:24.331Z,1478859444.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:24.701Z,1478859444.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:24.730Z,1478859444.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:25.095Z,1478859445.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:25.161Z,1478859445.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:25.485Z,1478859445.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:25.525Z,1478859445.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:25.900Z,1478859445.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:25.937Z,1478859445.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:26.300Z,1478859446.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:26.323Z,1478859446.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:26.700Z,1478859446.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:26.749Z,1478859446.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:27.097Z,1478859447.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:27.122Z,1478859447.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:27.504Z,1478859447.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:27.552Z,1478859447.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:27.891Z,1478859447.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:27.910Z,1478859447.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:28.289Z,1478859448.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:28.325Z,1478859448.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:28.693Z,1478859448.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:28.715Z,1478859448.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:29.099Z,1478859449.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:29.134Z,1478859449.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:29.539Z,1478859449.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:29.569Z,1478859449.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:29.906Z,1478859449.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:29.917Z,1478859449.917 [BPC1](ERROR): Failed to receive battery data
2016-11-11T10:17:29.918Z,1478859449.918 [BPC1] Communications Fault, FailCount= 1
2016-11-11T10:17:29.918Z,1478859449.918 [BPC1](ERROR): Communications Fault
2016-11-11T10:17:29.926Z,1478859449.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:29.974Z,1478859449.974 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T10:17:30.285Z,1478859450.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:30.324Z,1478859450.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:30.688Z,1478859450.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:30.725Z,1478859450.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:31.089Z,1478859451.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:31.125Z,1478859451.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:31.145Z,1478859451.145 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:17:31.145Z,1478859451.145 [BPC1] No Fault, FailCount= 1
2016-11-11T10:17:31.526Z,1478859451.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:31.637Z,1478859451.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:31.900Z,1478859451.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:31.957Z,1478859451.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:32.304Z,1478859452.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:32.333Z,1478859452.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:32.704Z,1478859452.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:32.740Z,1478859452.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:33.094Z,1478859453.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:33.109Z,1478859453.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:33.549Z,1478859453.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:33.568Z,1478859453.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:33.892Z,1478859453.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:33.929Z,1478859453.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:34.287Z,1478859454.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:34.323Z,1478859454.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:34.685Z,1478859454.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:34.725Z,1478859454.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:35.097Z,1478859455.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:35.131Z,1478859455.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:35.500Z,1478859455.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:35.530Z,1478859455.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:35.900Z,1478859455.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:35.937Z,1478859455.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:36.291Z,1478859456.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:36.339Z,1478859456.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:36.692Z,1478859456.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:36.745Z,1478859456.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:37.097Z,1478859457.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:37.117Z,1478859457.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:37.488Z,1478859457.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:37.525Z,1478859457.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:37.900Z,1478859457.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:37.962Z,1478859457.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:38.300Z,1478859458.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:38.317Z,1478859458.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:38.701Z,1478859458.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:38.720Z,1478859458.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:39.092Z,1478859459.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:39.109Z,1478859459.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:39.485Z,1478859459.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:39.532Z,1478859459.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:39.886Z,1478859459.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:40.009Z,1478859460.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:40.293Z,1478859460.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:40.318Z,1478859460.318 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:40.318Z,1478859460.318 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90
2016-11-11T10:17:40.318Z,1478859460.318 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:17:40.336Z,1478859460.336 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:40.336Z,1478859460.336 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 90
2016-11-11T10:17:40.336Z,1478859460.336 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:17:40.338Z,1478859460.338 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:40.338Z,1478859460.339 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 90
2016-11-11T10:17:40.339Z,1478859460.339 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:17:40.375Z,1478859460.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:17:40.376Z,1478859460.376 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:17:40.376Z,1478859460.376 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:17:40.694Z,1478859460.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:40.771Z,1478859460.771 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:17:40.771Z,1478859460.771 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90
2016-11-11T10:17:40.772Z,1478859460.772 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:17:40.772Z,1478859460.772 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 90
2016-11-11T10:17:40.773Z,1478859460.773 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:17:40.773Z,1478859460.773 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 90
2016-11-11T10:17:41.096Z,1478859461.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:41.140Z,1478859461.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:17:41.141Z,1478859461.141 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:17:41.141Z,1478859461.141 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:17:41.150Z,1478859461.150 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:17:41.150Z,1478859461.150 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:17:41.151Z,1478859461.151 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:17:41.155Z,1478859461.155 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:17:41.156Z,1478859461.156 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:17:41.156Z,1478859461.156 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:17:41.544Z,1478859461.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:41.588Z,1478859461.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:41.896Z,1478859461.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:41.929Z,1478859461.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:42.293Z,1478859462.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:42.302Z,1478859462.302 [BPC1](ERROR): Failed to parse message.
2016-11-11T10:17:42.302Z,1478859462.302 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T10:17:42.302Z,1478859462.302 [BPC1] Data Fault, FailCount= 2
2016-11-11T10:17:42.302Z,1478859462.302 [BPC1](ERROR): Data Fault
2016-11-11T10:17:42.310Z,1478859462.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:42.366Z,1478859462.365 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T10:17:42.694Z,1478859462.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:42.727Z,1478859462.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:43.097Z,1478859463.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:43.128Z,1478859463.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:43.504Z,1478859463.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:43.546Z,1478859463.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:43.638Z,1478859463.638 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:17:43.638Z,1478859463.638 [BPC1] No Fault, FailCount= 2
2016-11-11T10:17:43.898Z,1478859463.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:44.026Z,1478859464.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:44.305Z,1478859464.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:44.384Z,1478859464.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:44.704Z,1478859464.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:44.726Z,1478859464.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:45.089Z,1478859465.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:45.166Z,1478859465.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:45.505Z,1478859465.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:45.581Z,1478859465.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:45.889Z,1478859465.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:45.934Z,1478859465.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:46.291Z,1478859466.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:46.333Z,1478859466.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:46.698Z,1478859466.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:46.718Z,1478859466.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:47.102Z,1478859467.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:47.149Z,1478859467.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:47.508Z,1478859467.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:47.553Z,1478859467.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:52.400Z,1478859472.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:52.674Z,1478859472.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:52.690Z,1478859472.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:52.842Z,1478859472.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:52.889Z,1478859472.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:53.196Z,1478859473.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:53.236Z,1478859473.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:53.257Z,1478859473.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:53.632Z,1478859473.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:53.678Z,1478859473.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:54.047Z,1478859474.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:54.105Z,1478859474.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:54.410Z,1478859474.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:54.445Z,1478859474.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:54.814Z,1478859474.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:54.862Z,1478859474.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:55.224Z,1478859475.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:55.297Z,1478859475.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:55.609Z,1478859475.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:55.629Z,1478859475.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:56.049Z,1478859476.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:56.068Z,1478859476.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:56.424Z,1478859476.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:56.481Z,1478859476.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:56.822Z,1478859476.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:56.866Z,1478859476.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:57.225Z,1478859477.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:57.273Z,1478859477.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:57.611Z,1478859477.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:57.650Z,1478859477.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:58.013Z,1478859478.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:58.065Z,1478859478.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:58.411Z,1478859478.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:58.461Z,1478859478.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:58.821Z,1478859478.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:58.838Z,1478859478.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:59.233Z,1478859479.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:59.254Z,1478859479.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:17:59.625Z,1478859479.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:17:59.655Z,1478859479.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:00.016Z,1478859480.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:00.042Z,1478859480.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:00.418Z,1478859480.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:00.467Z,1478859480.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:00.811Z,1478859480.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:00.849Z,1478859480.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:01.211Z,1478859481.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:01.244Z,1478859481.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:01.610Z,1478859481.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:01.687Z,1478859481.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:02.022Z,1478859482.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:02.101Z,1478859482.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:02.432Z,1478859482.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:02.465Z,1478859482.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:02.822Z,1478859482.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:02.869Z,1478859482.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:03.218Z,1478859483.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:03.266Z,1478859483.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:03.619Z,1478859483.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:03.681Z,1478859483.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:04.056Z,1478859484.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:04.094Z,1478859484.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:04.411Z,1478859484.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:04.479Z,1478859484.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:04.833Z,1478859484.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:04.858Z,1478859484.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:05.234Z,1478859485.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:05.254Z,1478859485.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:05.626Z,1478859485.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:05.663Z,1478859485.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:06.028Z,1478859486.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:06.066Z,1478859486.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:06.420Z,1478859486.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:06.468Z,1478859486.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:06.820Z,1478859486.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:06.886Z,1478859486.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:07.213Z,1478859487.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:07.248Z,1478859487.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:07.611Z,1478859487.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:07.660Z,1478859487.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:08.026Z,1478859488.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:08.061Z,1478859488.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:08.425Z,1478859488.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:08.460Z,1478859488.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:08.822Z,1478859488.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:08.933Z,1478859488.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:09.210Z,1478859489.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:09.254Z,1478859489.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:09.616Z,1478859489.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:09.678Z,1478859489.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:10.012Z,1478859490.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:10.056Z,1478859490.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:10.417Z,1478859490.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:10.461Z,1478859490.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:10.820Z,1478859490.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:10.877Z,1478859490.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:11.228Z,1478859491.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:11.257Z,1478859491.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:11.632Z,1478859491.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:11.704Z,1478859491.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:12.009Z,1478859492.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:12.029Z,1478859492.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:12.413Z,1478859492.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:12.463Z,1478859492.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:12.813Z,1478859492.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:12.828Z,1478859492.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:13.222Z,1478859493.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:13.238Z,1478859493.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:13.621Z,1478859493.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:13.643Z,1478859493.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:14.026Z,1478859494.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:14.045Z,1478859494.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:14.428Z,1478859494.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:14.444Z,1478859494.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:14.830Z,1478859494.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:14.845Z,1478859494.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:15.209Z,1478859495.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:15.244Z,1478859495.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:15.609Z,1478859495.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:15.635Z,1478859495.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:16.019Z,1478859496.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:16.041Z,1478859496.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:16.409Z,1478859496.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:16.445Z,1478859496.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:16.824Z,1478859496.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:16.852Z,1478859496.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:17.231Z,1478859497.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:17.247Z,1478859497.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:17.628Z,1478859497.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:17.650Z,1478859497.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:18.013Z,1478859498.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:18.053Z,1478859498.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:18.409Z,1478859498.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:18.437Z,1478859498.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:18.809Z,1478859498.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:18.849Z,1478859498.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:19.219Z,1478859499.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:19.250Z,1478859499.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:19.618Z,1478859499.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:19.633Z,1478859499.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:20.032Z,1478859500.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:20.064Z,1478859500.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:20.428Z,1478859500.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:20.460Z,1478859500.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:20.823Z,1478859500.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:20.864Z,1478859500.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:21.212Z,1478859501.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:21.245Z,1478859501.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:21.613Z,1478859501.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:21.641Z,1478859501.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:22.028Z,1478859502.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:22.044Z,1478859502.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:22.420Z,1478859502.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:22.442Z,1478859502.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:22.824Z,1478859502.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:22.852Z,1478859502.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:23.235Z,1478859503.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:23.289Z,1478859503.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:23.620Z,1478859503.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:23.650Z,1478859503.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:24.010Z,1478859504.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:24.047Z,1478859504.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:24.410Z,1478859504.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:24.425Z,1478859504.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:24.811Z,1478859504.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:24.863Z,1478859504.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:25.216Z,1478859505.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:25.232Z,1478859505.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:25.622Z,1478859505.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:25.677Z,1478859505.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:26.036Z,1478859506.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:26.108Z,1478859506.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:26.425Z,1478859506.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:26.440Z,1478859506.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:26.821Z,1478859506.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:26.845Z,1478859506.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:27.222Z,1478859507.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:27.238Z,1478859507.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:27.625Z,1478859507.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:27.641Z,1478859507.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:28.019Z,1478859508.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:28.042Z,1478859508.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:28.409Z,1478859508.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:28.445Z,1478859508.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:28.823Z,1478859508.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:28.856Z,1478859508.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:29.228Z,1478859509.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:29.256Z,1478859509.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:29.624Z,1478859509.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:29.663Z,1478859509.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:30.009Z,1478859510.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:30.045Z,1478859510.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:30.413Z,1478859510.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:30.433Z,1478859510.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:30.813Z,1478859510.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:30.833Z,1478859510.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:31.216Z,1478859511.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:31.241Z,1478859511.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:31.621Z,1478859511.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:31.641Z,1478859511.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:31.952Z,1478859511.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:32.024Z,1478859512.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:32.053Z,1478859512.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:32.431Z,1478859512.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:32.446Z,1478859512.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:32.748Z,1478859512.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:32.830Z,1478859512.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:32.846Z,1478859512.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:33.209Z,1478859513.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:33.241Z,1478859513.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:33.609Z,1478859513.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:33.641Z,1478859513.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:34.027Z,1478859514.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:34.043Z,1478859514.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:34.409Z,1478859514.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:34.445Z,1478859514.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:34.831Z,1478859514.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:34.847Z,1478859514.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:35.239Z,1478859515.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:35.255Z,1478859515.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:35.624Z,1478859515.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:35.658Z,1478859515.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:36.010Z,1478859516.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:36.026Z,1478859516.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:36.413Z,1478859516.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:36.433Z,1478859516.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:36.813Z,1478859516.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:36.881Z,1478859516.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:37.214Z,1478859517.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:37.230Z,1478859517.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:37.621Z,1478859517.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:37.641Z,1478859517.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:38.024Z,1478859518.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:38.081Z,1478859518.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:38.431Z,1478859518.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:38.446Z,1478859518.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:38.828Z,1478859518.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:38.885Z,1478859518.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:39.209Z,1478859519.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:39.246Z,1478859519.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:39.617Z,1478859519.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:39.681Z,1478859519.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:40.019Z,1478859520.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:40.079Z,1478859520.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:40.409Z,1478859520.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:40.445Z,1478859520.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:40.824Z,1478859520.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:40.850Z,1478859520.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:41.235Z,1478859521.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:41.251Z,1478859521.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:41.640Z,1478859521.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:41.655Z,1478859521.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:42.009Z,1478859522.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:42.049Z,1478859522.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:42.417Z,1478859522.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:42.453Z,1478859522.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:42.809Z,1478859522.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:42.829Z,1478859522.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:43.214Z,1478859523.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:43.238Z,1478859523.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:43.621Z,1478859523.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:43.641Z,1478859523.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:44.026Z,1478859524.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:44.045Z,1478859524.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:44.431Z,1478859524.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:44.446Z,1478859524.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:44.830Z,1478859524.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:44.853Z,1478859524.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:45.209Z,1478859525.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:45.241Z,1478859525.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:45.625Z,1478859525.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:45.645Z,1478859525.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:45.928Z,1478859525.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:46.029Z,1478859526.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:46.044Z,1478859526.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:46.409Z,1478859526.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:46.446Z,1478859526.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:46.454Z,1478859526.454 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T10:13:46.1Z
2016-11-11T10:18:46.455Z,1478859526.455 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T10:18:46.455Z,1478859526.455 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T10:18:46.724Z,1478859526.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:46.824Z,1478859526.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:46.855Z,1478859526.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:47.757Z,1478859527.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:47.793Z,1478859527.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:47.936Z,1478859527.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:47.965Z,1478859527.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:51.527Z,1478859531.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:51.589Z,1478859531.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:51.653Z,1478859531.653 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0128.lzma
2016-11-11T10:18:51.688Z,1478859531.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:51.724Z,1478859531.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:52.062Z,1478859532.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:52.113Z,1478859532.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:52.441Z,1478859532.441 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0128.lzma.bak
2016-11-11T10:18:52.441Z,1478859532.441 [DataOverHttps](INFO): SBD MOMSN=4555313
2016-11-11T10:18:52.465Z,1478859532.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:52.514Z,1478859532.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:53.806Z,1478859533.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:53.865Z,1478859533.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:53.956Z,1478859533.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:53.988Z,1478859533.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:57.511Z,1478859537.511 [NAL9602](INFO): Powering down
2016-11-11T10:18:57.553Z,1478859537.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:57.609Z,1478859537.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:57.711Z,1478859537.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:57.727Z,1478859537.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:58.099Z,1478859538.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:58.157Z,1478859538.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:58.492Z,1478859538.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:58.529Z,1478859538.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:58.890Z,1478859538.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:58.906Z,1478859538.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:18:59.294Z,1478859539.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:18:59.313Z,1478859539.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:02.854Z,1478859542.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:02.896Z,1478859542.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:18.738Z,1478859558.738 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0129.lzma
2016-11-11T10:19:18.769Z,1478859558.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:18.794Z,1478859558.794 [BPC1](ERROR): Failed to receive battery data
2016-11-11T10:19:18.794Z,1478859558.794 [BPC1] Communications Fault, FailCount= 1
2016-11-11T10:19:18.794Z,1478859558.794 [BPC1](ERROR): Communications Fault
2016-11-11T10:19:18.803Z,1478859558.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:18.823Z,1478859558.823 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T10:19:18.906Z,1478859558.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:18.938Z,1478859558.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:20.443Z,1478859560.443 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0129.lzma.bak
2016-11-11T10:19:20.443Z,1478859560.443 [DataOverHttps](INFO): SBD MOMSN=4555315
2016-11-11T10:19:20.486Z,1478859560.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:20.534Z,1478859560.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:21.606Z,1478859561.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:21.622Z,1478859561.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:21.631Z,1478859561.631 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T10:19:21.631Z,1478859561.631 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T10:19:21.631Z,1478859561.631 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T10:19:21.668Z,1478859561.668 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:19:21.668Z,1478859561.668 [BPC1] No Fault, FailCount= 1
2016-11-11T10:19:21.717Z,1478859561.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:21.816Z,1478859561.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:25.048Z,1478859565.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:25.091Z,1478859565.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:25.190Z,1478859565.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:25.214Z,1478859565.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:25.563Z,1478859565.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:25.586Z,1478859565.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:25.961Z,1478859565.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:25.987Z,1478859565.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:26.361Z,1478859566.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:26.394Z,1478859566.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:26.761Z,1478859566.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:26.795Z,1478859566.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:27.168Z,1478859567.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:27.192Z,1478859567.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:27.561Z,1478859567.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:27.586Z,1478859567.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:27.961Z,1478859567.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:28.003Z,1478859568.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:28.361Z,1478859568.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:28.394Z,1478859568.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:28.761Z,1478859568.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:28.793Z,1478859568.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:29.161Z,1478859569.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:29.193Z,1478859569.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:29.565Z,1478859569.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:29.590Z,1478859569.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:29.961Z,1478859569.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:29.998Z,1478859569.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:30.361Z,1478859570.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:30.397Z,1478859570.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:30.761Z,1478859570.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:30.797Z,1478859570.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:31.161Z,1478859571.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:31.197Z,1478859571.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:31.561Z,1478859571.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:31.597Z,1478859571.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:31.993Z,1478859571.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:32.013Z,1478859572.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:32.361Z,1478859572.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:32.401Z,1478859572.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:32.761Z,1478859572.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:32.781Z,1478859572.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:33.164Z,1478859573.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:33.190Z,1478859573.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:33.573Z,1478859573.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:33.600Z,1478859573.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:33.961Z,1478859573.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:33.989Z,1478859573.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:34.372Z,1478859574.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:34.388Z,1478859574.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:34.769Z,1478859574.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:34.785Z,1478859574.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:35.161Z,1478859575.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:35.193Z,1478859575.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:35.570Z,1478859575.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:35.605Z,1478859575.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:35.961Z,1478859575.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:36.010Z,1478859576.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:36.366Z,1478859576.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:36.393Z,1478859576.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:36.773Z,1478859576.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:36.788Z,1478859576.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:37.169Z,1478859577.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:37.229Z,1478859577.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:37.570Z,1478859577.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:37.597Z,1478859577.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:37.962Z,1478859577.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:38.002Z,1478859578.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:38.362Z,1478859578.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:38.398Z,1478859578.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:38.761Z,1478859578.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:38.813Z,1478859578.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:39.165Z,1478859579.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:39.217Z,1478859579.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:39.561Z,1478859579.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:39.577Z,1478859579.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:39.961Z,1478859579.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:39.982Z,1478859579.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:40.365Z,1478859580.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:40.381Z,1478859580.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:40.761Z,1478859580.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:40.776Z,1478859580.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:41.166Z,1478859581.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:41.181Z,1478859581.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:41.573Z,1478859581.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:41.588Z,1478859581.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:41.967Z,1478859581.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:41.983Z,1478859581.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:42.368Z,1478859582.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:42.389Z,1478859582.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:42.758Z,1478859582.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:42.791Z,1478859582.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:43.168Z,1478859583.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:43.184Z,1478859583.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:43.576Z,1478859583.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:43.591Z,1478859583.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:43.961Z,1478859583.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:43.994Z,1478859583.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:44.361Z,1478859584.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:44.393Z,1478859584.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:44.761Z,1478859584.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:44.789Z,1478859584.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:45.165Z,1478859585.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:45.197Z,1478859585.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:45.561Z,1478859585.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:45.585Z,1478859585.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:45.961Z,1478859585.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:46.005Z,1478859586.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:46.361Z,1478859586.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:46.405Z,1478859586.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:46.761Z,1478859586.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:46.801Z,1478859586.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:47.161Z,1478859587.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:47.181Z,1478859587.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:47.561Z,1478859587.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:47.581Z,1478859587.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:47.969Z,1478859587.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:47.984Z,1478859587.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:48.368Z,1478859588.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:48.384Z,1478859588.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:48.768Z,1478859588.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:48.783Z,1478859588.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:49.171Z,1478859589.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:49.187Z,1478859589.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:49.561Z,1478859589.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:49.593Z,1478859589.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:49.961Z,1478859589.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:50.006Z,1478859590.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:50.361Z,1478859590.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:50.393Z,1478859590.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:50.761Z,1478859590.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:50.795Z,1478859590.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:51.161Z,1478859591.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:51.193Z,1478859591.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:51.569Z,1478859591.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:51.635Z,1478859591.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:51.966Z,1478859591.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:51.981Z,1478859591.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:52.366Z,1478859592.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:52.382Z,1478859592.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:52.764Z,1478859592.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:52.820Z,1478859592.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:53.168Z,1478859593.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:53.183Z,1478859593.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:53.561Z,1478859593.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:53.617Z,1478859593.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:53.961Z,1478859593.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:54.011Z,1478859594.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:54.361Z,1478859594.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:54.381Z,1478859594.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:54.766Z,1478859594.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:54.785Z,1478859594.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:55.164Z,1478859595.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:55.180Z,1478859595.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:55.572Z,1478859595.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:55.588Z,1478859595.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:55.968Z,1478859595.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:55.983Z,1478859595.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:56.368Z,1478859596.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:56.384Z,1478859596.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:56.776Z,1478859596.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:56.791Z,1478859596.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:57.162Z,1478859597.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:57.189Z,1478859597.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:57.561Z,1478859597.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:57.587Z,1478859597.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:57.961Z,1478859597.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:57.994Z,1478859597.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:58.367Z,1478859598.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:58.389Z,1478859598.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:58.768Z,1478859598.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:58.784Z,1478859598.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:59.181Z,1478859599.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:59.201Z,1478859599.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:59.568Z,1478859599.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:19:59.602Z,1478859599.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:19:59.970Z,1478859599.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:00.017Z,1478859600.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:00.365Z,1478859600.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:00.400Z,1478859600.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:00.761Z,1478859600.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:00.776Z,1478859600.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:01.173Z,1478859601.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:01.188Z,1478859601.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:01.567Z,1478859601.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:01.617Z,1478859601.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:01.968Z,1478859601.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:01.992Z,1478859601.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:02.369Z,1478859602.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:02.389Z,1478859602.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:02.769Z,1478859602.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:02.789Z,1478859602.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:03.161Z,1478859603.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:03.234Z,1478859603.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:03.569Z,1478859603.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:03.605Z,1478859603.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:03.961Z,1478859603.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:03.997Z,1478859603.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:04.365Z,1478859604.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:04.398Z,1478859604.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:04.765Z,1478859604.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:04.803Z,1478859604.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:05.162Z,1478859605.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:05.248Z,1478859605.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:05.561Z,1478859605.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:05.600Z,1478859605.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:05.961Z,1478859605.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:06.058Z,1478859606.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:06.368Z,1478859606.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:06.393Z,1478859606.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:06.769Z,1478859606.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:06.825Z,1478859606.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:07.169Z,1478859607.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:07.227Z,1478859607.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:07.565Z,1478859607.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:07.607Z,1478859607.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:07.960Z,1478859607.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:08.005Z,1478859608.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:08.361Z,1478859608.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:08.403Z,1478859608.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:08.761Z,1478859608.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:08.810Z,1478859608.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:09.164Z,1478859609.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:09.180Z,1478859609.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:09.569Z,1478859609.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:09.589Z,1478859609.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:09.970Z,1478859609.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:09.988Z,1478859609.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:10.365Z,1478859610.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:10.390Z,1478859610.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:10.773Z,1478859610.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:10.790Z,1478859610.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:11.172Z,1478859611.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:11.191Z,1478859611.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:11.571Z,1478859611.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:11.588Z,1478859611.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:11.968Z,1478859611.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:12.005Z,1478859612.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:12.361Z,1478859612.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:12.395Z,1478859612.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:12.761Z,1478859612.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:12.798Z,1478859612.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:13.163Z,1478859613.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:13.203Z,1478859613.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:13.561Z,1478859613.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:13.595Z,1478859613.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:13.961Z,1478859613.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:14.011Z,1478859614.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:14.377Z,1478859614.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:14.400Z,1478859614.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:14.762Z,1478859614.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:14.797Z,1478859614.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:15.161Z,1478859615.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:15.237Z,1478859615.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:15.576Z,1478859615.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:15.599Z,1478859615.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:15.962Z,1478859615.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:15.995Z,1478859615.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:16.364Z,1478859616.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:16.383Z,1478859616.383 [PNI_TCM](ERROR): CRC does not match. Expected:0x53 got:0x16829
2016-11-11T10:20:16.409Z,1478859616.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:16.762Z,1478859616.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:16.797Z,1478859616.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:17.162Z,1478859617.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:17.230Z,1478859617.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:17.572Z,1478859617.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:17.600Z,1478859617.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:17.965Z,1478859617.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:17.992Z,1478859617.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:18.366Z,1478859618.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:18.408Z,1478859618.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:18.761Z,1478859618.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:18.781Z,1478859618.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:19.177Z,1478859619.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:19.265Z,1478859619.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:19.577Z,1478859619.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:19.608Z,1478859619.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:19.968Z,1478859619.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:20.012Z,1478859620.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:20.367Z,1478859620.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:20.421Z,1478859620.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:20.770Z,1478859620.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:20.785Z,1478859620.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:21.170Z,1478859621.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:21.272Z,1478859621.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:21.572Z,1478859621.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:21.602Z,1478859621.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:21.968Z,1478859621.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:21.993Z,1478859621.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:22.362Z,1478859622.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:22.390Z,1478859622.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:25.885Z,1478859625.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:25.894Z,1478859625.894 [BPC1](ERROR): Failed to receive battery data
2016-11-11T10:20:25.894Z,1478859625.894 [BPC1] Communications Fault, FailCount= 1
2016-11-11T10:20:25.894Z,1478859625.894 [BPC1](ERROR): Communications Fault
2016-11-11T10:20:25.902Z,1478859625.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:25.961Z,1478859625.961 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T10:20:25.997Z,1478859625.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:26.018Z,1478859626.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:26.116Z,1478859626.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:26.401Z,1478859626.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:26.416Z,1478859626.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:26.803Z,1478859626.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:26.818Z,1478859626.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:26.855Z,1478859626.855 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:20:26.855Z,1478859626.855 [BPC1] No Fault, FailCount= 1
2016-11-11T10:20:26.912Z,1478859626.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:27.200Z,1478859627.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:27.266Z,1478859627.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:27.600Z,1478859627.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:27.687Z,1478859627.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:27.994Z,1478859627.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:28.030Z,1478859628.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:28.393Z,1478859628.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:28.429Z,1478859628.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:28.793Z,1478859628.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:28.829Z,1478859628.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:29.229Z,1478859629.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:29.282Z,1478859629.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:29.593Z,1478859629.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:29.636Z,1478859629.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:29.993Z,1478859629.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:30.036Z,1478859630.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:30.393Z,1478859630.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:30.408Z,1478859630.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:30.793Z,1478859630.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:30.813Z,1478859630.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:31.226Z,1478859631.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:31.288Z,1478859631.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:31.601Z,1478859631.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:31.616Z,1478859631.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:31.999Z,1478859631.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:32.021Z,1478859632.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:32.400Z,1478859632.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:32.415Z,1478859632.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:32.800Z,1478859632.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:32.816Z,1478859632.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:33.218Z,1478859633.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:33.257Z,1478859633.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:33.593Z,1478859633.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:33.627Z,1478859633.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:33.993Z,1478859633.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:34.025Z,1478859634.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:34.393Z,1478859634.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:34.427Z,1478859634.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:34.804Z,1478859634.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:34.819Z,1478859634.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:35.208Z,1478859635.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:35.258Z,1478859635.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:35.593Z,1478859635.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:35.629Z,1478859635.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:35.993Z,1478859635.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:36.029Z,1478859636.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:36.393Z,1478859636.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:36.417Z,1478859636.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:36.793Z,1478859636.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:36.808Z,1478859636.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:37.197Z,1478859637.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:37.240Z,1478859637.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:37.605Z,1478859637.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:37.620Z,1478859637.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:38.001Z,1478859638.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:38.016Z,1478859638.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:38.399Z,1478859638.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:38.461Z,1478859638.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:38.793Z,1478859638.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:38.841Z,1478859638.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:39.193Z,1478859639.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:39.225Z,1478859639.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:39.593Z,1478859639.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:39.669Z,1478859639.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:39.000Z,1478859640.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:40.053Z,1478859640.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:40.400Z,1478859640.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:40.415Z,1478859640.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:40.800Z,1478859640.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:40.855Z,1478859640.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:41.204Z,1478859641.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:41.256Z,1478859641.256 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:41.256Z,1478859641.256 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91
2016-11-11T10:20:41.256Z,1478859641.256 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:20:41.262Z,1478859641.262 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:41.262Z,1478859641.262 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 91
2016-11-11T10:20:41.262Z,1478859641.262 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:20:41.265Z,1478859641.265 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:41.265Z,1478859641.265 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 91
2016-11-11T10:20:41.265Z,1478859641.265 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:20:41.279Z,1478859641.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:20:41.280Z,1478859641.280 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:20:41.280Z,1478859641.280 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:20:41.593Z,1478859641.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:41.719Z,1478859641.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:20:41.720Z,1478859641.720 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91
2016-11-11T10:20:41.720Z,1478859641.720 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:20:41.720Z,1478859641.720 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 91
2016-11-11T10:20:41.721Z,1478859641.721 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:20:41.721Z,1478859641.721 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 91
2016-11-11T10:20:41.998Z,1478859641.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:42.016Z,1478859642.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:20:42.016Z,1478859642.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:20:42.017Z,1478859642.017 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:20:42.021Z,1478859642.021 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:20:42.022Z,1478859642.022 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:20:42.022Z,1478859642.022 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:20:42.022Z,1478859642.022 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:20:42.023Z,1478859642.023 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:20:42.023Z,1478859642.023 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:20:42.405Z,1478859642.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:42.420Z,1478859642.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:42.800Z,1478859642.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:42.815Z,1478859642.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:43.206Z,1478859643.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:43.237Z,1478859643.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:43.600Z,1478859643.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:43.623Z,1478859643.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:43.997Z,1478859643.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:44.031Z,1478859644.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:44.393Z,1478859644.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:44.418Z,1478859644.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:44.797Z,1478859644.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:44.830Z,1478859644.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:45.211Z,1478859645.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:45.233Z,1478859645.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:45.593Z,1478859645.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:45.625Z,1478859645.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:45.997Z,1478859645.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:46.034Z,1478859646.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:46.396Z,1478859646.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:46.411Z,1478859646.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:46.798Z,1478859646.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:46.813Z,1478859646.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:47.209Z,1478859647.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:47.245Z,1478859647.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:47.597Z,1478859647.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:47.618Z,1478859647.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:47.000Z,1478859648.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:48.015Z,1478859648.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:48.402Z,1478859648.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:48.429Z,1478859648.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:48.796Z,1478859648.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:48.818Z,1478859648.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:49.206Z,1478859649.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:49.234Z,1478859649.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:49.597Z,1478859649.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:49.630Z,1478859649.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:49.993Z,1478859649.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:50.025Z,1478859650.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:50.393Z,1478859650.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:50.425Z,1478859650.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:50.797Z,1478859650.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:50.830Z,1478859650.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:51.193Z,1478859651.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:51.225Z,1478859651.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:51.600Z,1478859651.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:51.615Z,1478859651.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:52.000Z,1478859652.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:52.016Z,1478859652.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:52.401Z,1478859652.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:52.437Z,1478859652.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:52.800Z,1478859652.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:52.821Z,1478859652.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:53.200Z,1478859653.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:53.269Z,1478859653.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:53.609Z,1478859653.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:53.676Z,1478859653.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:53.993Z,1478859653.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:54.045Z,1478859654.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:54.393Z,1478859654.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:54.426Z,1478859654.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:54.793Z,1478859654.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:54.845Z,1478859654.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:55.193Z,1478859655.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:55.249Z,1478859655.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:55.599Z,1478859655.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:55.666Z,1478859655.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:55.993Z,1478859655.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:56.037Z,1478859656.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:56.393Z,1478859656.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:56.433Z,1478859656.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:56.793Z,1478859656.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:56.833Z,1478859656.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:57.196Z,1478859657.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:57.239Z,1478859657.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:57.593Z,1478859657.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:57.608Z,1478859657.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:57.997Z,1478859657.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:58.013Z,1478859658.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:58.396Z,1478859658.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:58.417Z,1478859658.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:58.798Z,1478859658.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:58.813Z,1478859658.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:59.203Z,1478859659.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:59.223Z,1478859659.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:20:59.596Z,1478859659.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:20:59.629Z,1478859659.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:00.002Z,1478859660.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:00.017Z,1478859660.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:00.399Z,1478859660.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:00.420Z,1478859660.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:00.800Z,1478859660.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:00.821Z,1478859660.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:01.203Z,1478859661.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:01.231Z,1478859661.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:01.594Z,1478859661.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:01.625Z,1478859661.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:01.993Z,1478859661.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:02.025Z,1478859662.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:02.404Z,1478859662.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:02.425Z,1478859662.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:02.808Z,1478859662.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:02.825Z,1478859662.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:03.195Z,1478859663.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:03.240Z,1478859663.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:03.593Z,1478859663.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:03.629Z,1478859663.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:03.993Z,1478859663.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:04.025Z,1478859664.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:04.393Z,1478859664.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:04.437Z,1478859664.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:04.793Z,1478859664.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:04.834Z,1478859664.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:05.193Z,1478859665.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:05.264Z,1478859665.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:05.605Z,1478859665.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:05.621Z,1478859665.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:05.999Z,1478859665.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:06.061Z,1478859666.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:06.408Z,1478859666.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:06.424Z,1478859666.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:06.516Z,1478859666.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:06.793Z,1478859666.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:06.825Z,1478859666.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:07.193Z,1478859667.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:07.258Z,1478859667.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:07.312Z,1478859667.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:07.647Z,1478859667.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:07.700Z,1478859667.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:08.001Z,1478859668.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:08.016Z,1478859668.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:08.399Z,1478859668.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:08.452Z,1478859668.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:08.799Z,1478859668.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:08.814Z,1478859668.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:09.205Z,1478859669.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:09.260Z,1478859669.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:09.629Z,1478859669.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:09.706Z,1478859669.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:09.000Z,1478859670.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:10.015Z,1478859670.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:10.395Z,1478859670.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:10.430Z,1478859670.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:10.796Z,1478859670.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:10.827Z,1478859670.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:11.207Z,1478859671.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:11.223Z,1478859671.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:11.604Z,1478859671.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:11.632Z,1478859671.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:11.993Z,1478859671.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:12.024Z,1478859672.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:12.393Z,1478859672.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:12.424Z,1478859672.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:12.793Z,1478859672.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:12.828Z,1478859672.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:13.200Z,1478859673.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:13.228Z,1478859673.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:13.601Z,1478859673.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:13.616Z,1478859673.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:13.999Z,1478859673.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:14.014Z,1478859674.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:14.401Z,1478859674.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:14.416Z,1478859674.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:14.800Z,1478859674.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:14.815Z,1478859674.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:15.208Z,1478859675.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:15.223Z,1478859675.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:15.601Z,1478859675.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:15.617Z,1478859675.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:16.004Z,1478859676.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:16.020Z,1478859676.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:16.393Z,1478859676.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:16.428Z,1478859676.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:16.793Z,1478859676.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:16.825Z,1478859676.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:17.216Z,1478859677.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:17.232Z,1478859677.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:17.604Z,1478859677.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:17.626Z,1478859677.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:18.004Z,1478859678.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:18.025Z,1478859678.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:18.393Z,1478859678.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:18.433Z,1478859678.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:18.797Z,1478859678.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:18.822Z,1478859678.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:19.213Z,1478859679.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:19.263Z,1478859679.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:19.596Z,1478859679.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:19.612Z,1478859679.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:19.997Z,1478859679.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:20.057Z,1478859680.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:20.399Z,1478859680.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:20.414Z,1478859680.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:20.800Z,1478859680.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:20.816Z,1478859680.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:21.196Z,1478859681.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:21.225Z,1478859681.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:21.624Z,1478859681.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:21.694Z,1478859681.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:21.993Z,1478859681.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:22.021Z,1478859682.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:22.398Z,1478859682.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:22.449Z,1478859682.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:26.022Z,1478859686.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:26.038Z,1478859686.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:26.151Z,1478859686.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:26.213Z,1478859686.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:26.493Z,1478859686.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:26.558Z,1478859686.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:26.896Z,1478859686.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:26.911Z,1478859686.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:27.304Z,1478859687.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:27.320Z,1478859687.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:27.689Z,1478859687.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:27.714Z,1478859687.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:28.089Z,1478859688.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:28.122Z,1478859688.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:28.489Z,1478859688.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:28.522Z,1478859688.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:28.889Z,1478859688.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:28.933Z,1478859688.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:29.297Z,1478859689.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:29.329Z,1478859689.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:29.693Z,1478859689.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:29.729Z,1478859689.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:30.089Z,1478859690.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:30.132Z,1478859690.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:30.489Z,1478859690.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:30.504Z,1478859690.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:30.889Z,1478859690.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:30.909Z,1478859690.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:31.301Z,1478859691.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:31.316Z,1478859691.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:31.695Z,1478859691.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:31.710Z,1478859691.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:32.097Z,1478859692.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:32.112Z,1478859692.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:32.496Z,1478859692.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:32.511Z,1478859692.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:32.896Z,1478859692.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:32.911Z,1478859692.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:33.304Z,1478859693.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:33.320Z,1478859693.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:33.692Z,1478859693.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:33.725Z,1478859693.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:34.089Z,1478859694.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:34.121Z,1478859694.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:34.489Z,1478859694.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:34.515Z,1478859694.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:34.889Z,1478859694.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:34.921Z,1478859694.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:35.293Z,1478859695.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:35.329Z,1478859695.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:35.697Z,1478859695.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:35.723Z,1478859695.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:36.089Z,1478859696.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:36.125Z,1478859696.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:36.489Z,1478859696.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:36.525Z,1478859696.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:36.892Z,1478859696.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:36.925Z,1478859696.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:37.289Z,1478859697.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:37.345Z,1478859697.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:37.689Z,1478859697.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:37.732Z,1478859697.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:38.089Z,1478859698.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:38.129Z,1478859698.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:38.489Z,1478859698.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:38.537Z,1478859698.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:38.895Z,1478859698.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:38.910Z,1478859698.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:39.301Z,1478859699.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:39.316Z,1478859699.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:39.691Z,1478859699.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:39.777Z,1478859699.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:40.089Z,1478859700.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:40.119Z,1478859700.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:40.496Z,1478859700.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:40.552Z,1478859700.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:40.889Z,1478859700.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:40.939Z,1478859700.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:41.300Z,1478859701.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:41.323Z,1478859701.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:41.689Z,1478859701.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:41.721Z,1478859701.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:42.089Z,1478859702.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:42.125Z,1478859702.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:42.489Z,1478859702.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:42.525Z,1478859702.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:42.889Z,1478859702.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:42.925Z,1478859702.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:43.297Z,1478859703.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:43.323Z,1478859703.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:43.689Z,1478859703.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:43.703Z,1478859703.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:44.093Z,1478859704.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:44.113Z,1478859704.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:44.493Z,1478859704.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:44.513Z,1478859704.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:44.896Z,1478859704.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:44.911Z,1478859704.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:45.305Z,1478859705.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:45.320Z,1478859705.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:45.697Z,1478859705.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:45.717Z,1478859705.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:46.089Z,1478859706.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:46.124Z,1478859706.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:46.489Z,1478859706.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:46.521Z,1478859706.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:46.889Z,1478859706.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:46.924Z,1478859706.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:47.306Z,1478859707.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:47.321Z,1478859707.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:47.694Z,1478859707.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:47.729Z,1478859707.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:48.090Z,1478859708.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:48.121Z,1478859708.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:48.490Z,1478859708.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:48.523Z,1478859708.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:48.890Z,1478859708.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:48.925Z,1478859708.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:49.289Z,1478859709.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:49.314Z,1478859709.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:49.689Z,1478859709.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:49.705Z,1478859709.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:50.089Z,1478859710.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:50.105Z,1478859710.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:50.489Z,1478859710.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:50.510Z,1478859710.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:50.893Z,1478859710.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:50.914Z,1478859710.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:51.297Z,1478859711.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:51.313Z,1478859711.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:51.700Z,1478859711.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:51.761Z,1478859711.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:52.105Z,1478859712.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:52.126Z,1478859712.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:52.489Z,1478859712.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:52.556Z,1478859712.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:52.889Z,1478859712.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:52.925Z,1478859712.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:53.289Z,1478859713.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:53.347Z,1478859713.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:53.689Z,1478859713.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:53.725Z,1478859713.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:54.089Z,1478859714.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:54.144Z,1478859714.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:54.489Z,1478859714.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:54.544Z,1478859714.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:54.889Z,1478859714.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:54.916Z,1478859714.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:55.297Z,1478859715.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:55.329Z,1478859715.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:55.692Z,1478859715.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:55.707Z,1478859715.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:56.095Z,1478859716.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:56.111Z,1478859716.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:56.503Z,1478859716.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:56.525Z,1478859716.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:56.888Z,1478859716.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:56.921Z,1478859716.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:57.289Z,1478859717.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:57.315Z,1478859717.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:57.689Z,1478859717.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:57.721Z,1478859717.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:58.089Z,1478859718.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:58.123Z,1478859718.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:58.489Z,1478859718.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:58.525Z,1478859718.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:58.889Z,1478859718.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:58.921Z,1478859718.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:59.297Z,1478859719.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:59.329Z,1478859719.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:21:59.689Z,1478859719.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:21:59.712Z,1478859719.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:00.097Z,1478859720.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:00.112Z,1478859720.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:00.495Z,1478859720.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:00.510Z,1478859720.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:00.896Z,1478859720.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:00.911Z,1478859720.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:01.303Z,1478859721.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:01.319Z,1478859721.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:01.704Z,1478859721.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:01.720Z,1478859721.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:02.093Z,1478859722.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:02.125Z,1478859722.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:02.493Z,1478859722.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:02.519Z,1478859722.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:02.889Z,1478859722.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:02.925Z,1478859722.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:03.289Z,1478859723.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:03.317Z,1478859723.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:03.697Z,1478859723.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:03.729Z,1478859723.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:04.097Z,1478859724.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:04.117Z,1478859724.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:04.493Z,1478859724.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:04.512Z,1478859724.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:04.892Z,1478859724.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:04.921Z,1478859724.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:05.293Z,1478859725.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:05.331Z,1478859725.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:05.705Z,1478859725.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:05.765Z,1478859725.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:06.089Z,1478859726.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:06.121Z,1478859726.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:06.489Z,1478859726.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:06.543Z,1478859726.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:06.889Z,1478859726.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:06.925Z,1478859726.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:07.289Z,1478859727.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:07.343Z,1478859727.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:07.689Z,1478859727.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:07.725Z,1478859727.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:08.089Z,1478859728.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:08.137Z,1478859728.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:08.489Z,1478859728.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:08.547Z,1478859728.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:08.893Z,1478859728.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:08.933Z,1478859728.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:09.289Z,1478859729.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:09.326Z,1478859729.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:09.692Z,1478859729.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:09.713Z,1478859729.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:10.089Z,1478859730.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:10.109Z,1478859730.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:10.492Z,1478859730.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:10.508Z,1478859730.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:10.897Z,1478859730.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:10.912Z,1478859730.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:11.295Z,1478859731.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:11.313Z,1478859731.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:11.696Z,1478859731.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:11.712Z,1478859731.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:12.101Z,1478859732.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:12.116Z,1478859732.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:12.497Z,1478859732.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:12.512Z,1478859732.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:12.889Z,1478859732.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:12.914Z,1478859732.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:13.297Z,1478859733.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:13.323Z,1478859733.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:13.689Z,1478859733.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:13.721Z,1478859733.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:14.089Z,1478859734.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:14.121Z,1478859734.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:14.493Z,1478859734.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:14.529Z,1478859734.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:14.889Z,1478859734.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:14.932Z,1478859734.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:15.297Z,1478859735.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:15.330Z,1478859735.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:15.697Z,1478859735.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:15.729Z,1478859735.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:16.089Z,1478859736.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:16.132Z,1478859736.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:16.497Z,1478859736.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:16.512Z,1478859736.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:16.897Z,1478859736.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:16.917Z,1478859736.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:17.297Z,1478859737.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:17.312Z,1478859737.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:17.695Z,1478859737.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:17.714Z,1478859737.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:18.101Z,1478859738.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:18.125Z,1478859738.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:18.489Z,1478859738.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:18.525Z,1478859738.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:18.893Z,1478859738.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:18.925Z,1478859738.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:19.289Z,1478859739.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:19.345Z,1478859739.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:19.689Z,1478859739.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:19.732Z,1478859739.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:20.093Z,1478859740.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:20.129Z,1478859740.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:20.489Z,1478859740.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:20.505Z,1478859740.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:20.889Z,1478859740.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:20.953Z,1478859740.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:21.296Z,1478859741.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:21.312Z,1478859741.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:21.697Z,1478859741.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:21.752Z,1478859741.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:22.095Z,1478859742.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:22.117Z,1478859742.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:22.497Z,1478859742.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:22.553Z,1478859742.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:25.931Z,1478859745.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:25.978Z,1478859745.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:26.080Z,1478859746.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:26.109Z,1478859746.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:26.456Z,1478859746.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:26.477Z,1478859746.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:26.856Z,1478859746.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:26.872Z,1478859746.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:27.264Z,1478859747.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:27.285Z,1478859747.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:27.649Z,1478859747.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:27.684Z,1478859747.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:28.049Z,1478859748.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:28.084Z,1478859748.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:28.449Z,1478859748.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:28.485Z,1478859748.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:28.849Z,1478859748.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:28.893Z,1478859748.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:29.249Z,1478859749.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:29.285Z,1478859749.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:29.654Z,1478859749.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:29.670Z,1478859749.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:30.056Z,1478859750.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:30.077Z,1478859750.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:30.457Z,1478859750.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:30.472Z,1478859750.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:30.856Z,1478859750.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:30.872Z,1478859750.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:31.256Z,1478859751.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:31.270Z,1478859751.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:31.655Z,1478859751.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:31.677Z,1478859751.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:32.049Z,1478859752.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:32.081Z,1478859752.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:32.449Z,1478859752.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:32.481Z,1478859752.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:32.849Z,1478859752.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:32.885Z,1478859752.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:33.249Z,1478859753.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:33.282Z,1478859753.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:33.649Z,1478859753.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:33.685Z,1478859753.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:34.053Z,1478859754.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:34.085Z,1478859754.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:34.449Z,1478859754.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:34.469Z,1478859754.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:34.849Z,1478859754.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:34.869Z,1478859754.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:35.254Z,1478859755.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:35.269Z,1478859755.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:35.656Z,1478859755.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:35.672Z,1478859755.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:36.055Z,1478859756.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:36.077Z,1478859756.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:36.456Z,1478859756.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:36.471Z,1478859756.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:36.860Z,1478859756.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:36.921Z,1478859756.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:37.264Z,1478859757.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:37.285Z,1478859757.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:37.649Z,1478859757.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:37.685Z,1478859757.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:38.049Z,1478859758.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:38.109Z,1478859758.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:38.449Z,1478859758.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:38.484Z,1478859758.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:38.849Z,1478859758.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:38.901Z,1478859758.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:39.264Z,1478859759.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:39.285Z,1478859759.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:39.657Z,1478859759.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:39.718Z,1478859759.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:40.073Z,1478859760.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:40.121Z,1478859760.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:40.451Z,1478859760.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:40.487Z,1478859760.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:40.851Z,1478859760.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:40.893Z,1478859760.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:41.259Z,1478859761.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:41.279Z,1478859761.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:41.651Z,1478859761.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:41.686Z,1478859761.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:42.050Z,1478859762.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:42.101Z,1478859762.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:42.451Z,1478859762.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:42.497Z,1478859762.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:42.858Z,1478859762.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:42.882Z,1478859762.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:43.258Z,1478859763.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:43.286Z,1478859763.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:43.651Z,1478859763.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:43.693Z,1478859763.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:44.054Z,1478859764.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:44.070Z,1478859764.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:44.451Z,1478859764.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:44.478Z,1478859764.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:44.855Z,1478859764.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:44.870Z,1478859764.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:45.251Z,1478859765.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:45.286Z,1478859765.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:45.650Z,1478859765.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:45.748Z,1478859765.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:46.054Z,1478859766.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:46.105Z,1478859766.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:46.477Z,1478859766.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:46.535Z,1478859766.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:46.850Z,1478859766.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:46.901Z,1478859766.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:47.250Z,1478859767.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:47.277Z,1478859767.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:47.649Z,1478859767.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:47.665Z,1478859767.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:48.060Z,1478859768.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:48.095Z,1478859768.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:48.457Z,1478859768.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:48.477Z,1478859768.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:48.853Z,1478859768.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:48.876Z,1478859768.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:49.254Z,1478859769.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:49.289Z,1478859769.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:49.654Z,1478859769.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:49.686Z,1478859769.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:50.057Z,1478859770.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:50.097Z,1478859770.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:50.453Z,1478859770.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:50.485Z,1478859770.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:50.855Z,1478859770.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:50.886Z,1478859770.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:51.249Z,1478859771.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:51.276Z,1478859771.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:51.660Z,1478859771.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:51.697Z,1478859771.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:52.065Z,1478859772.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:52.125Z,1478859772.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:52.466Z,1478859772.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:52.503Z,1478859772.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:52.875Z,1478859772.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:52.902Z,1478859772.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:53.263Z,1478859773.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:53.307Z,1478859773.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:53.649Z,1478859773.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:53.695Z,1478859773.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:54.055Z,1478859774.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:54.121Z,1478859774.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:54.461Z,1478859774.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:54.526Z,1478859774.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:54.851Z,1478859774.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:54.891Z,1478859774.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:55.255Z,1478859775.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:55.310Z,1478859775.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:55.659Z,1478859775.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:55.688Z,1478859775.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:56.051Z,1478859776.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:56.126Z,1478859776.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:56.451Z,1478859776.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:56.489Z,1478859776.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:56.851Z,1478859776.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:56.891Z,1478859776.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:57.259Z,1478859777.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:57.332Z,1478859777.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:57.651Z,1478859777.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:57.697Z,1478859777.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:58.051Z,1478859778.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:58.081Z,1478859778.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:58.451Z,1478859778.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:58.491Z,1478859778.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:58.860Z,1478859778.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:58.903Z,1478859778.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:59.259Z,1478859779.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:59.310Z,1478859779.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:22:59.659Z,1478859779.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:22:59.687Z,1478859779.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:00.056Z,1478859780.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:00.100Z,1478859780.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:00.451Z,1478859780.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:00.471Z,1478859780.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:00.858Z,1478859780.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:00.874Z,1478859780.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:01.260Z,1478859781.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:01.289Z,1478859781.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:01.651Z,1478859781.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:01.691Z,1478859781.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:02.051Z,1478859782.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:02.128Z,1478859782.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:02.449Z,1478859782.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:02.465Z,1478859782.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:02.885Z,1478859782.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:03.011Z,1478859783.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:03.256Z,1478859783.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:03.286Z,1478859783.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:03.652Z,1478859783.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:03.697Z,1478859783.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:04.052Z,1478859784.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:04.103Z,1478859784.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:04.456Z,1478859784.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:04.512Z,1478859784.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:04.868Z,1478859784.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:04.906Z,1478859784.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:05.251Z,1478859785.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:05.294Z,1478859785.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:05.651Z,1478859785.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:05.692Z,1478859785.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:06.060Z,1478859786.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:06.107Z,1478859786.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:06.460Z,1478859786.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:06.533Z,1478859786.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:06.857Z,1478859786.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:06.874Z,1478859786.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:07.249Z,1478859787.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:07.274Z,1478859787.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:07.649Z,1478859787.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:07.715Z,1478859787.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:08.049Z,1478859788.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:08.074Z,1478859788.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:08.449Z,1478859788.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:08.500Z,1478859788.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:08.849Z,1478859788.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:08.899Z,1478859788.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:09.257Z,1478859789.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:09.285Z,1478859789.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:09.652Z,1478859789.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:09.667Z,1478859789.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:10.054Z,1478859790.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:10.070Z,1478859790.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:10.452Z,1478859790.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:10.468Z,1478859790.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:10.855Z,1478859790.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:10.873Z,1478859790.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:11.256Z,1478859791.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:11.273Z,1478859791.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:11.656Z,1478859791.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:11.672Z,1478859791.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:12.057Z,1478859792.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:12.073Z,1478859792.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:12.449Z,1478859792.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:12.483Z,1478859792.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:12.849Z,1478859792.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:12.875Z,1478859792.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:13.260Z,1478859793.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:13.293Z,1478859793.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:13.649Z,1478859793.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:13.686Z,1478859793.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:14.049Z,1478859794.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:14.082Z,1478859794.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:14.449Z,1478859794.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:14.483Z,1478859794.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:14.853Z,1478859794.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:14.885Z,1478859794.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:15.249Z,1478859795.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:15.285Z,1478859795.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:15.649Z,1478859795.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:15.685Z,1478859795.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:16.049Z,1478859796.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:16.081Z,1478859796.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:16.449Z,1478859796.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:16.477Z,1478859796.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:16.849Z,1478859796.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:16.896Z,1478859796.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:17.256Z,1478859797.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:17.271Z,1478859797.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:17.660Z,1478859797.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:17.676Z,1478859797.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:18.060Z,1478859798.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:18.075Z,1478859798.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:18.449Z,1478859798.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:18.490Z,1478859798.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:18.849Z,1478859798.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:18.877Z,1478859798.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:19.249Z,1478859799.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:19.268Z,1478859799.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:19.655Z,1478859799.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:19.677Z,1478859799.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:20.056Z,1478859800.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:20.075Z,1478859800.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:20.455Z,1478859800.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:20.470Z,1478859800.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:20.856Z,1478859800.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:20.968Z,1478859800.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:21.257Z,1478859801.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:21.295Z,1478859801.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:21.649Z,1478859801.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:21.694Z,1478859801.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:22.049Z,1478859802.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:22.093Z,1478859802.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:22.449Z,1478859802.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:22.501Z,1478859802.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:22.849Z,1478859802.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:22.948Z,1478859802.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:26.388Z,1478859806.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:26.403Z,1478859806.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:26.516Z,1478859806.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:26.541Z,1478859806.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:26.884Z,1478859806.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:26.917Z,1478859806.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:27.280Z,1478859807.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:27.296Z,1478859807.296 [PNI_TCM](ERROR): CRC does not match. Expected:0x17839 got:0x36463
2016-11-11T10:23:27.314Z,1478859807.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:27.679Z,1478859807.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:27.711Z,1478859807.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:28.079Z,1478859808.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:28.116Z,1478859808.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:28.477Z,1478859808.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:28.517Z,1478859808.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:28.878Z,1478859808.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:28.912Z,1478859808.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:29.279Z,1478859809.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:29.317Z,1478859809.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:29.685Z,1478859809.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:29.705Z,1478859809.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:30.085Z,1478859810.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:30.104Z,1478859810.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:30.502Z,1478859810.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:30.517Z,1478859810.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:30.890Z,1478859810.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:30.950Z,1478859810.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:31.281Z,1478859811.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:31.349Z,1478859811.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:31.682Z,1478859811.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:31.707Z,1478859811.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:32.086Z,1478859812.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:32.110Z,1478859812.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:32.493Z,1478859812.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:32.509Z,1478859812.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:32.897Z,1478859812.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:32.953Z,1478859812.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:33.277Z,1478859813.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:33.306Z,1478859813.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:33.679Z,1478859813.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:33.686Z,1478859813.686 [PNI_TCM](ERROR): CRC does not match. Expected:0x3791 got:0x56512
2016-11-11T10:23:33.714Z,1478859813.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:34.079Z,1478859814.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:34.102Z,1478859814.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:34.481Z,1478859814.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:34.517Z,1478859814.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:34.923Z,1478859814.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:35.017Z,1478859815.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:35.293Z,1478859815.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:35.317Z,1478859815.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:35.685Z,1478859815.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:35.709Z,1478859815.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:36.084Z,1478859816.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:36.146Z,1478859816.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:36.485Z,1478859816.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:36.512Z,1478859816.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:36.930Z,1478859816.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:37.004Z,1478859817.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:37.278Z,1478859817.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:37.329Z,1478859817.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:37.677Z,1478859817.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:37.720Z,1478859817.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:38.079Z,1478859818.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:38.095Z,1478859818.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:38.479Z,1478859818.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:38.495Z,1478859818.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:38.882Z,1478859818.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:38.897Z,1478859818.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:39.298Z,1478859819.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:39.328Z,1478859819.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:39.687Z,1478859819.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:39.702Z,1478859819.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:40.082Z,1478859820.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:40.109Z,1478859820.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:40.236Z,1478859820.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:40.480Z,1478859820.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:40.508Z,1478859820.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:40.877Z,1478859820.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:40.902Z,1478859820.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:41.033Z,1478859821.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:41.294Z,1478859821.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:41.313Z,1478859821.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:41.678Z,1478859821.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:41.694Z,1478859821.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:42.077Z,1478859822.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:42.093Z,1478859822.092 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:42.093Z,1478859822.093 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92
2016-11-11T10:23:42.093Z,1478859822.093 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:23:42.099Z,1478859822.099 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:42.100Z,1478859822.100 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 92
2016-11-11T10:23:42.100Z,1478859822.100 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:23:42.102Z,1478859822.102 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:42.102Z,1478859822.102 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 92
2016-11-11T10:23:42.102Z,1478859822.102 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:23:42.144Z,1478859822.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:23:42.144Z,1478859822.144 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:23:42.144Z,1478859822.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:23:42.485Z,1478859822.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:42.540Z,1478859822.540 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:23:42.540Z,1478859822.540 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92
2016-11-11T10:23:42.541Z,1478859822.541 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:23:42.541Z,1478859822.541 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 92
2016-11-11T10:23:42.541Z,1478859822.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:23:42.541Z,1478859822.542 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 92
2016-11-11T10:23:42.891Z,1478859822.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:42.905Z,1478859822.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:23:42.906Z,1478859822.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:23:42.906Z,1478859822.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:23:42.911Z,1478859822.911 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:23:42.911Z,1478859822.911 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:23:42.912Z,1478859822.912 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:23:42.912Z,1478859822.912 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:23:42.913Z,1478859822.912 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:23:42.913Z,1478859822.913 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:23:43.285Z,1478859823.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:43.301Z,1478859823.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:43.677Z,1478859823.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:43.719Z,1478859823.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:44.077Z,1478859824.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:44.117Z,1478859824.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:44.480Z,1478859824.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:44.495Z,1478859824.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:44.909Z,1478859824.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:44.965Z,1478859824.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:45.282Z,1478859825.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:45.317Z,1478859825.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:45.682Z,1478859825.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:45.708Z,1478859825.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:46.079Z,1478859826.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:46.113Z,1478859826.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:46.477Z,1478859826.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:46.494Z,1478859826.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:46.894Z,1478859826.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:46.944Z,1478859826.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:47.281Z,1478859827.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:47.302Z,1478859827.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:47.685Z,1478859827.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:47.701Z,1478859827.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:48.088Z,1478859828.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:48.105Z,1478859828.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:48.480Z,1478859828.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:48.505Z,1478859828.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:48.914Z,1478859828.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:48.954Z,1478859828.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:49.288Z,1478859829.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:49.338Z,1478859829.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:49.685Z,1478859829.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:49.766Z,1478859829.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:50.077Z,1478859830.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:50.110Z,1478859830.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:50.477Z,1478859830.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:50.513Z,1478859830.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:50.902Z,1478859830.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:50.953Z,1478859830.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:51.277Z,1478859831.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:51.309Z,1478859831.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:51.677Z,1478859831.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:51.729Z,1478859831.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:52.077Z,1478859832.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:52.113Z,1478859832.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:52.478Z,1478859832.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:52.542Z,1478859832.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:52.877Z,1478859832.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:52.913Z,1478859832.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:53.277Z,1478859833.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:53.297Z,1478859833.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:53.682Z,1478859833.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:53.701Z,1478859833.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:54.084Z,1478859834.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:54.099Z,1478859834.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:54.228Z,1478859834.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:54.484Z,1478859834.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:54.499Z,1478859834.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:54.885Z,1478859834.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:54.900Z,1478859834.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:55.024Z,1478859835.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:55.288Z,1478859835.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:55.349Z,1478859835.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:55.677Z,1478859835.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:55.711Z,1478859835.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:56.077Z,1478859836.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:56.113Z,1478859836.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:56.477Z,1478859836.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:56.502Z,1478859836.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:56.877Z,1478859836.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:56.911Z,1478859836.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:57.277Z,1478859837.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:57.360Z,1478859837.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:57.677Z,1478859837.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:57.704Z,1478859837.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:58.077Z,1478859838.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:58.121Z,1478859838.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:58.477Z,1478859838.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:58.492Z,1478859838.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:58.886Z,1478859838.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:58.925Z,1478859838.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:59.277Z,1478859839.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:59.313Z,1478859839.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:23:59.677Z,1478859839.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:23:59.705Z,1478859839.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:00.084Z,1478859840.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:00.100Z,1478859840.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:00.480Z,1478859840.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:00.503Z,1478859840.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:00.885Z,1478859840.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:00.936Z,1478859840.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:01.281Z,1478859841.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:01.313Z,1478859841.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:01.677Z,1478859841.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:01.717Z,1478859841.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:02.077Z,1478859842.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:02.117Z,1478859842.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:02.481Z,1478859842.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:02.496Z,1478859842.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:02.893Z,1478859842.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:02.928Z,1478859842.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:03.284Z,1478859843.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:03.299Z,1478859843.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:03.684Z,1478859843.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:03.700Z,1478859843.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:04.080Z,1478859844.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:04.100Z,1478859844.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:04.484Z,1478859844.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:04.557Z,1478859844.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:04.894Z,1478859844.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:04.923Z,1478859844.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:05.277Z,1478859845.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:05.348Z,1478859845.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:05.677Z,1478859845.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:05.709Z,1478859845.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:06.088Z,1478859846.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:06.153Z,1478859846.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:06.477Z,1478859846.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:06.526Z,1478859846.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:06.877Z,1478859846.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:06.911Z,1478859846.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:07.285Z,1478859847.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:07.310Z,1478859847.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:07.685Z,1478859847.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:07.717Z,1478859847.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:08.077Z,1478859848.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:08.113Z,1478859848.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:08.477Z,1478859848.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:08.513Z,1478859848.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:08.877Z,1478859848.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:08.913Z,1478859848.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:09.313Z,1478859849.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:09.362Z,1478859849.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:09.689Z,1478859849.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:09.704Z,1478859849.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:10.083Z,1478859850.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:10.105Z,1478859850.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:10.484Z,1478859850.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:10.499Z,1478859850.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:10.892Z,1478859850.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:10.908Z,1478859850.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:11.290Z,1478859851.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:11.358Z,1478859851.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:11.677Z,1478859851.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:11.692Z,1478859851.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:12.089Z,1478859852.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:12.104Z,1478859852.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:12.483Z,1478859852.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:12.505Z,1478859852.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:12.887Z,1478859852.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:12.938Z,1478859852.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:13.284Z,1478859853.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:13.300Z,1478859853.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:13.679Z,1478859853.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:13.711Z,1478859853.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:14.084Z,1478859854.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:14.105Z,1478859854.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:14.477Z,1478859854.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:14.509Z,1478859854.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:14.888Z,1478859854.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:14.916Z,1478859854.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:15.277Z,1478859855.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:15.309Z,1478859855.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:15.677Z,1478859855.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:15.705Z,1478859855.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:16.077Z,1478859856.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:16.113Z,1478859856.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:16.477Z,1478859856.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:16.513Z,1478859856.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:16.884Z,1478859856.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:16.928Z,1478859856.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:17.281Z,1478859857.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:17.317Z,1478859857.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:17.681Z,1478859857.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:17.716Z,1478859857.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:18.077Z,1478859858.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:18.117Z,1478859858.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:18.477Z,1478859858.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:18.553Z,1478859858.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:18.888Z,1478859858.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:18.912Z,1478859858.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:19.287Z,1478859859.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:19.303Z,1478859859.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:19.684Z,1478859859.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:19.742Z,1478859859.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:20.085Z,1478859860.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:20.100Z,1478859860.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:20.484Z,1478859860.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:20.540Z,1478859860.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:20.885Z,1478859860.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:20.972Z,1478859860.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:21.277Z,1478859861.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:21.313Z,1478859861.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:21.677Z,1478859861.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:21.714Z,1478859861.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:22.081Z,1478859862.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:22.108Z,1478859862.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:22.127Z,1478859862.127 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T10:24:22.127Z,1478859862.127 [Default:CheckIn:C.Wait] Stopped
2016-11-11T10:24:22.127Z,1478859862.127 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T10:24:22.127Z,1478859862.128 [Default:CheckIn:D] Running Loop=1
2016-11-11T10:24:22.477Z,1478859862.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:22.522Z,1478859862.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:22.531Z,1478859862.531 [Default:CheckIn:D] Stopped
2016-11-11T10:24:22.531Z,1478859862.531 [Default:CheckIn:E] Running Loop=1
2016-11-11T10:24:22.878Z,1478859862.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:22.894Z,1478859862.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:22.918Z,1478859862.918 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 334.353678 min 
2016-11-11T10:24:22.918Z,1478859862.918 [Default:CheckIn:E] Stopped
2016-11-11T10:24:22.919Z,1478859862.918 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T10:24:22.919Z,1478859862.918 [Default:CheckIn] Stopped
2016-11-11T10:24:22.919Z,1478859862.919 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T10:24:22.923Z,1478859862.923 [Default:CheckIn](INFO): Running loop #33
2016-11-11T10:24:22.923Z,1478859862.923 [Default:CheckIn] Running Loop=33
2016-11-11T10:24:22.923Z,1478859862.923 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T10:24:22.923Z,1478859862.923 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T10:24:26.363Z,1478859866.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:26.378Z,1478859866.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:26.472Z,1478859866.472 [NAL9602](INFO): Powering up
2016-11-11T10:24:26.490Z,1478859866.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:26.518Z,1478859866.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:26.876Z,1478859866.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:26.927Z,1478859866.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:27.264Z,1478859867.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:27.279Z,1478859867.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:27.664Z,1478859867.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:27.680Z,1478859867.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:28.064Z,1478859868.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:28.085Z,1478859868.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:28.467Z,1478859868.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:28.486Z,1478859868.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:28.868Z,1478859868.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:28.896Z,1478859868.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:29.268Z,1478859869.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:29.289Z,1478859869.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:29.657Z,1478859869.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:29.689Z,1478859869.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:30.064Z,1478859870.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:30.087Z,1478859870.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:30.457Z,1478859870.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:30.498Z,1478859870.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:30.860Z,1478859870.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:30.894Z,1478859870.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:31.257Z,1478859871.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:31.280Z,1478859871.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:31.661Z,1478859871.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:31.689Z,1478859871.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:32.057Z,1478859872.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:32.101Z,1478859872.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:32.457Z,1478859872.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:32.497Z,1478859872.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:32.859Z,1478859872.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:32.911Z,1478859872.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:33.263Z,1478859873.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:33.336Z,1478859873.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:33.660Z,1478859873.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:33.676Z,1478859873.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:34.064Z,1478859874.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:34.121Z,1478859874.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:34.464Z,1478859874.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:34.479Z,1478859874.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:34.864Z,1478859874.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:34.938Z,1478859874.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:35.257Z,1478859875.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:35.315Z,1478859875.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:35.657Z,1478859875.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:35.691Z,1478859875.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:36.057Z,1478859876.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:36.083Z,1478859876.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:36.457Z,1478859876.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:36.491Z,1478859876.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:36.857Z,1478859876.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:36.891Z,1478859876.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:37.291Z,1478859877.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:37.337Z,1478859877.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:37.645Z,1478859877.645 [NAL9602](INFO): NAL9602 initialized
2016-11-11T10:24:37.662Z,1478859877.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:37.705Z,1478859877.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:38.057Z,1478859878.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:38.100Z,1478859878.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:38.441Z,1478859878.441 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T10:24:38.441Z,1478859878.441 [NAL9602] Data Fault, FailCount= 1
2016-11-11T10:24:38.441Z,1478859878.441 [NAL9602](ERROR): Data Fault
2016-11-11T10:24:38.458Z,1478859878.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:38.474Z,1478859878.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:38.515Z,1478859878.515 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T10:24:38.849Z,1478859878.849 [NAL9602](INFO): Powering down
2016-11-11T10:24:38.866Z,1478859878.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:38.898Z,1478859878.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:39.269Z,1478859879.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:39.325Z,1478859879.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:39.662Z,1478859879.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:39.682Z,1478859879.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:39.722Z,1478859879.722 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T10:24:39.722Z,1478859879.722 [NAL9602] No Fault, FailCount= 1
2016-11-11T10:24:40.065Z,1478859880.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:40.080Z,1478859880.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:40.464Z,1478859880.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:40.479Z,1478859880.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:40.871Z,1478859880.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:40.890Z,1478859880.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:41.262Z,1478859881.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:41.289Z,1478859881.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:41.663Z,1478859881.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:41.689Z,1478859881.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:42.063Z,1478859882.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:42.084Z,1478859882.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:42.468Z,1478859882.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:42.489Z,1478859882.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:42.867Z,1478859882.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:42.900Z,1478859882.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:43.268Z,1478859883.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:43.284Z,1478859883.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:43.657Z,1478859883.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:43.689Z,1478859883.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:44.041Z,1478859884.040 [NAL9602](INFO): Powering up NAL9602
2016-11-11T10:24:44.058Z,1478859884.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:44.097Z,1478859884.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:44.461Z,1478859884.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:44.485Z,1478859884.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:44.857Z,1478859884.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:44.890Z,1478859884.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:45.257Z,1478859885.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:45.284Z,1478859885.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:45.661Z,1478859885.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:45.677Z,1478859885.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:46.057Z,1478859886.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:46.077Z,1478859886.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:46.460Z,1478859886.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:46.481Z,1478859886.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:46.860Z,1478859886.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:46.876Z,1478859886.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:47.259Z,1478859887.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:47.314Z,1478859887.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:47.664Z,1478859887.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:47.698Z,1478859887.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:48.062Z,1478859888.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:48.081Z,1478859888.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:48.468Z,1478859888.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:48.523Z,1478859888.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:48.874Z,1478859888.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:48.929Z,1478859888.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:49.257Z,1478859889.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:49.315Z,1478859889.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:49.664Z,1478859889.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:49.720Z,1478859889.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:50.057Z,1478859890.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:50.091Z,1478859890.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:50.457Z,1478859890.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:50.490Z,1478859890.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:50.864Z,1478859890.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:50.886Z,1478859890.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:51.285Z,1478859891.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:51.325Z,1478859891.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:51.657Z,1478859891.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:51.689Z,1478859891.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:52.061Z,1478859892.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:52.094Z,1478859892.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:52.457Z,1478859892.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:52.491Z,1478859892.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:52.857Z,1478859892.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:52.889Z,1478859892.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:53.276Z,1478859893.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:53.306Z,1478859893.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:53.657Z,1478859893.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:53.684Z,1478859893.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:54.057Z,1478859894.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:54.072Z,1478859894.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:54.457Z,1478859894.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:54.477Z,1478859894.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:54.876Z,1478859894.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:54.903Z,1478859894.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:55.265Z,1478859895.265 [NAL9602](INFO): NAL9602 initialized
2016-11-11T10:24:55.282Z,1478859895.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:55.312Z,1478859895.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:55.669Z,1478859895.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:55.705Z,1478859895.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:56.068Z,1478859896.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:56.096Z,1478859896.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:56.472Z,1478859896.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:56.503Z,1478859896.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:56.888Z,1478859896.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:56.921Z,1478859896.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:57.261Z,1478859897.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:57.285Z,1478859897.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:57.664Z,1478859897.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:57.686Z,1478859897.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:58.068Z,1478859898.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:58.091Z,1478859898.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:58.458Z,1478859898.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:58.495Z,1478859898.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:58.884Z,1478859898.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:58.900Z,1478859898.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:59.281Z,1478859899.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:59.302Z,1478859899.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:24:59.672Z,1478859899.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:24:59.705Z,1478859899.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:00.057Z,1478859900.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:00.085Z,1478859900.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:00.465Z,1478859900.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:00.481Z,1478859900.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:00.879Z,1478859900.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:00.895Z,1478859900.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:01.264Z,1478859901.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:01.333Z,1478859901.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:01.657Z,1478859901.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:01.692Z,1478859901.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:02.057Z,1478859902.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:02.093Z,1478859902.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:02.457Z,1478859902.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:02.501Z,1478859902.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:02.897Z,1478859902.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:02.929Z,1478859902.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:03.261Z,1478859903.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:03.309Z,1478859903.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:03.672Z,1478859903.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:03.717Z,1478859903.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:04.072Z,1478859904.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:04.093Z,1478859904.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:04.464Z,1478859904.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:04.479Z,1478859904.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:04.864Z,1478859904.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:04.880Z,1478859904.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:05.271Z,1478859905.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:05.328Z,1478859905.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:05.660Z,1478859905.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:05.688Z,1478859905.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:06.064Z,1478859906.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:06.080Z,1478859906.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:06.465Z,1478859906.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:06.485Z,1478859906.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:06.879Z,1478859906.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:06.894Z,1478859906.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:07.283Z,1478859907.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:07.310Z,1478859907.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:07.658Z,1478859907.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:07.694Z,1478859907.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:08.057Z,1478859908.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:08.085Z,1478859908.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:08.457Z,1478859908.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:08.485Z,1478859908.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:08.857Z,1478859908.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:08.872Z,1478859908.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:09.257Z,1478859909.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:09.277Z,1478859909.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:09.657Z,1478859909.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:09.673Z,1478859909.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:10.064Z,1478859910.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:10.079Z,1478859910.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:10.465Z,1478859910.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:10.480Z,1478859910.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:10.869Z,1478859910.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:10.889Z,1478859910.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:11.266Z,1478859911.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:11.281Z,1478859911.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:11.664Z,1478859911.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:11.680Z,1478859911.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:12.069Z,1478859912.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:12.084Z,1478859912.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:12.465Z,1478859912.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:12.485Z,1478859912.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:12.860Z,1478859912.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:12.883Z,1478859912.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:13.264Z,1478859913.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:13.280Z,1478859913.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:13.665Z,1478859913.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:13.685Z,1478859913.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:14.061Z,1478859914.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:14.084Z,1478859914.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:14.468Z,1478859914.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:14.484Z,1478859914.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:14.874Z,1478859914.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:14.890Z,1478859914.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:15.257Z,1478859915.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:15.290Z,1478859915.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:15.679Z,1478859915.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:15.745Z,1478859915.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:16.079Z,1478859916.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:16.095Z,1478859916.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:16.465Z,1478859916.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:16.536Z,1478859916.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:16.865Z,1478859916.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:16.912Z,1478859916.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:17.257Z,1478859917.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:17.302Z,1478859917.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:17.657Z,1478859917.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:17.706Z,1478859917.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:18.058Z,1478859918.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:18.081Z,1478859918.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:18.464Z,1478859918.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:18.479Z,1478859918.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:18.868Z,1478859918.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:18.883Z,1478859918.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:19.278Z,1478859919.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:19.298Z,1478859919.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:19.676Z,1478859919.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:19.701Z,1478859919.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:20.082Z,1478859920.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:20.097Z,1478859920.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:20.458Z,1478859920.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:20.495Z,1478859920.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:20.861Z,1478859920.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:20.887Z,1478859920.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:21.271Z,1478859921.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:21.308Z,1478859921.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:21.661Z,1478859921.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:21.687Z,1478859921.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:22.057Z,1478859922.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:22.090Z,1478859922.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:22.457Z,1478859922.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:22.485Z,1478859922.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:22.857Z,1478859922.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:22.889Z,1478859922.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:23.258Z,1478859923.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:23.274Z,1478859923.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:26.620Z,1478859926.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:26.652Z,1478859926.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:26.776Z,1478859926.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:26.811Z,1478859926.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:27.136Z,1478859927.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:27.163Z,1478859927.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:27.549Z,1478859927.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:27.577Z,1478859927.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:27.938Z,1478859927.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:27.980Z,1478859927.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:28.313Z,1478859928.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:28.342Z,1478859928.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:28.738Z,1478859928.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:28.780Z,1478859928.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:29.120Z,1478859929.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:29.147Z,1478859929.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:29.512Z,1478859929.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:29.579Z,1478859929.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:29.907Z,1478859929.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:29.965Z,1478859929.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:30.321Z,1478859930.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:30.337Z,1478859930.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:30.720Z,1478859930.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:30.741Z,1478859930.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:31.146Z,1478859931.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:31.197Z,1478859931.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:31.514Z,1478859931.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:31.529Z,1478859931.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:31.932Z,1478859931.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:31.982Z,1478859931.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:32.332Z,1478859932.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:32.356Z,1478859932.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:32.714Z,1478859932.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:32.765Z,1478859932.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:33.110Z,1478859933.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:33.130Z,1478859933.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:33.513Z,1478859933.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:33.533Z,1478859933.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:33.914Z,1478859933.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:33.939Z,1478859933.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:34.303Z,1478859934.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:34.338Z,1478859934.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:34.716Z,1478859934.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:34.732Z,1478859934.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:35.104Z,1478859935.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:35.138Z,1478859935.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:35.503Z,1478859935.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:35.542Z,1478859935.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:35.916Z,1478859935.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:35.942Z,1478859935.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:36.312Z,1478859936.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:36.347Z,1478859936.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:36.780Z,1478859936.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:36.818Z,1478859936.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:37.120Z,1478859937.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:37.157Z,1478859937.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:37.509Z,1478859937.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:37.525Z,1478859937.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:37.913Z,1478859937.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:37.933Z,1478859937.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:38.310Z,1478859938.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:38.326Z,1478859938.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:38.727Z,1478859938.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:38.775Z,1478859938.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:39.116Z,1478859939.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:39.132Z,1478859939.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:39.506Z,1478859939.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:39.533Z,1478859939.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:39.907Z,1478859939.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:39.934Z,1478859939.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:40.308Z,1478859940.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:40.345Z,1478859940.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:40.731Z,1478859940.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:40.789Z,1478859940.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:41.128Z,1478859941.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:41.147Z,1478859941.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:41.516Z,1478859941.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:41.543Z,1478859941.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:41.932Z,1478859941.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:41.948Z,1478859941.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:42.320Z,1478859942.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:42.349Z,1478859942.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:42.736Z,1478859942.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:42.768Z,1478859942.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:43.104Z,1478859943.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:43.140Z,1478859943.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:43.513Z,1478859943.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:43.522Z,1478859943.522 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T10:25:43.522Z,1478859943.522 [BPC1] Data Fault, FailCount= 1
2016-11-11T10:25:43.522Z,1478859943.522 [BPC1](ERROR): Data Fault
2016-11-11T10:25:43.543Z,1478859943.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:43.595Z,1478859943.595 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T10:25:43.912Z,1478859943.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:43.953Z,1478859943.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:44.330Z,1478859944.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:44.350Z,1478859944.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:44.704Z,1478859944.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:44.740Z,1478859944.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:44.789Z,1478859944.789 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:25:44.789Z,1478859944.789 [BPC1] No Fault, FailCount= 1
2016-11-11T10:25:45.114Z,1478859945.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:45.194Z,1478859945.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:45.509Z,1478859945.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:45.565Z,1478859945.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:45.909Z,1478859945.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:45.961Z,1478859945.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:46.315Z,1478859946.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:46.342Z,1478859946.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:46.720Z,1478859946.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:46.744Z,1478859946.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:47.184Z,1478859947.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:47.242Z,1478859947.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:47.524Z,1478859947.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:47.550Z,1478859947.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:47.918Z,1478859947.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:47.957Z,1478859947.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:48.310Z,1478859948.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:48.325Z,1478859948.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:48.719Z,1478859948.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:48.741Z,1478859948.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:49.121Z,1478859949.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:49.213Z,1478859949.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:49.529Z,1478859949.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:49.575Z,1478859949.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:49.922Z,1478859949.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:49.937Z,1478859949.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:50.313Z,1478859950.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:50.333Z,1478859950.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:50.721Z,1478859950.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:50.757Z,1478859950.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:51.103Z,1478859951.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:51.139Z,1478859951.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:51.531Z,1478859951.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:51.547Z,1478859951.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:51.912Z,1478859951.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:51.947Z,1478859951.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:52.325Z,1478859952.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:52.345Z,1478859952.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:52.731Z,1478859952.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:52.778Z,1478859952.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:53.107Z,1478859953.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:53.123Z,1478859953.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:53.508Z,1478859953.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:53.523Z,1478859953.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:53.908Z,1478859953.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:53.923Z,1478859953.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:53.960Z,1478859953.960 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T10:25:54.315Z,1478859954.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:54.331Z,1478859954.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:54.727Z,1478859954.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:54.763Z,1478859954.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:55.101Z,1478859955.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:55.137Z,1478859955.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:55.504Z,1478859955.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:55.540Z,1478859955.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:55.909Z,1478859955.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:55.937Z,1478859955.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:56.305Z,1478859956.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:56.329Z,1478859956.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:56.738Z,1478859956.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:56.766Z,1478859956.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:57.125Z,1478859957.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:57.145Z,1478859957.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:57.523Z,1478859957.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:57.573Z,1478859957.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:57.918Z,1478859957.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:57.988Z,1478859957.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:58.303Z,1478859958.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:58.340Z,1478859958.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:58.703Z,1478859958.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:58.783Z,1478859958.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:59.107Z,1478859959.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:59.143Z,1478859959.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:59.507Z,1478859959.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:59.558Z,1478859959.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:25:59.904Z,1478859959.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:25:59.957Z,1478859959.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:00.311Z,1478859960.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:00.335Z,1478859960.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:00.741Z,1478859960.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:00.758Z,1478859960.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:01.116Z,1478859961.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:01.184Z,1478859961.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:01.524Z,1478859961.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:01.548Z,1478859961.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:01.925Z,1478859961.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:01.945Z,1478859961.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:02.312Z,1478859962.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:02.347Z,1478859962.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:02.729Z,1478859962.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:02.750Z,1478859962.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:03.148Z,1478859963.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:03.218Z,1478859963.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:03.502Z,1478859963.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:03.530Z,1478859963.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:03.914Z,1478859963.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:03.945Z,1478859963.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:04.317Z,1478859964.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:04.345Z,1478859964.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:04.719Z,1478859964.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:04.784Z,1478859964.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:05.110Z,1478859965.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:05.125Z,1478859965.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:05.515Z,1478859965.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:05.537Z,1478859965.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:05.911Z,1478859965.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:05.948Z,1478859965.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:06.329Z,1478859966.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:06.372Z,1478859966.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:06.717Z,1478859966.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:06.743Z,1478859966.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:07.124Z,1478859967.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:07.139Z,1478859967.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:07.519Z,1478859967.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:07.535Z,1478859967.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:07.928Z,1478859967.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:07.944Z,1478859967.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:08.316Z,1478859968.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:08.347Z,1478859968.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:08.722Z,1478859968.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:08.748Z,1478859968.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:09.112Z,1478859969.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:09.139Z,1478859969.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:09.504Z,1478859969.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:09.538Z,1478859969.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:09.903Z,1478859969.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:09.954Z,1478859969.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:10.304Z,1478859970.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:10.319Z,1478859970.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:10.712Z,1478859970.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:10.754Z,1478859970.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:11.107Z,1478859971.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:11.122Z,1478859971.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:11.507Z,1478859971.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:11.522Z,1478859971.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:11.911Z,1478859971.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:11.977Z,1478859971.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:12.316Z,1478859972.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:12.331Z,1478859972.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:12.716Z,1478859972.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:12.802Z,1478859972.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:13.120Z,1478859973.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:13.142Z,1478859973.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:13.526Z,1478859973.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:13.577Z,1478859973.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:13.903Z,1478859973.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:13.963Z,1478859973.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:14.028Z,1478859974.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:14.303Z,1478859974.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:14.335Z,1478859974.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:14.703Z,1478859974.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:14.738Z,1478859974.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:14.824Z,1478859974.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:15.145Z,1478859975.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:15.207Z,1478859975.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:15.504Z,1478859975.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:15.519Z,1478859975.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:15.911Z,1478859975.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:15.952Z,1478859975.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:16.303Z,1478859976.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:16.333Z,1478859976.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:16.706Z,1478859976.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:16.737Z,1478859976.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:17.163Z,1478859977.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:17.223Z,1478859977.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:17.526Z,1478859977.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:17.565Z,1478859977.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:17.912Z,1478859977.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:17.945Z,1478859977.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:18.322Z,1478859978.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:18.338Z,1478859978.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:18.734Z,1478859978.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:18.748Z,1478859978.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:19.105Z,1478859979.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:19.137Z,1478859979.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:19.509Z,1478859979.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:19.538Z,1478859979.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:19.904Z,1478859979.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:19.940Z,1478859979.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:20.303Z,1478859980.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:20.327Z,1478859980.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:20.744Z,1478859980.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:20.760Z,1478859980.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:21.113Z,1478859981.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:21.145Z,1478859981.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:21.510Z,1478859981.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:21.558Z,1478859981.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:21.906Z,1478859981.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:21.922Z,1478859981.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:22.322Z,1478859982.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:22.354Z,1478859982.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:22.722Z,1478859982.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:22.738Z,1478859982.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:23.125Z,1478859983.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:23.148Z,1478859983.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:23.538Z,1478859983.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:23.578Z,1478859983.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:26.964Z,1478859986.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:27.058Z,1478859987.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:27.153Z,1478859987.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:27.176Z,1478859987.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:27.529Z,1478859987.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:27.570Z,1478859987.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:27.948Z,1478859987.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:27.977Z,1478859987.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:27.984Z,1478859987.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:28.340Z,1478859988.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:28.381Z,1478859988.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:28.743Z,1478859988.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:28.780Z,1478859988.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:28.813Z,1478859988.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:29.147Z,1478859989.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:29.188Z,1478859989.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:29.530Z,1478859989.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:29.569Z,1478859989.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:29.937Z,1478859989.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:29.957Z,1478859989.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:30.337Z,1478859990.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:30.357Z,1478859990.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:30.737Z,1478859990.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:30.757Z,1478859990.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:31.156Z,1478859991.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:31.203Z,1478859991.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:31.537Z,1478859991.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:31.552Z,1478859991.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:31.937Z,1478859991.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:31.957Z,1478859991.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:32.337Z,1478859992.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:32.352Z,1478859992.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:32.753Z,1478859992.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:32.773Z,1478859992.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:33.151Z,1478859993.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:33.167Z,1478859993.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:33.552Z,1478859993.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:33.567Z,1478859993.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:33.952Z,1478859993.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:33.973Z,1478859993.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:34.347Z,1478859994.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:34.363Z,1478859994.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:34.730Z,1478859994.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:34.769Z,1478859994.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:35.137Z,1478859995.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:35.170Z,1478859995.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:35.533Z,1478859995.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:35.561Z,1478859995.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:35.933Z,1478859995.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:35.948Z,1478859995.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:36.333Z,1478859996.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:36.353Z,1478859996.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:36.750Z,1478859996.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:36.780Z,1478859996.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:37.139Z,1478859997.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:37.154Z,1478859997.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:37.537Z,1478859997.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:37.561Z,1478859997.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:37.933Z,1478859997.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:37.973Z,1478859997.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:38.344Z,1478859998.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:38.394Z,1478859998.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:38.753Z,1478859998.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:38.768Z,1478859998.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:39.146Z,1478859999.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:39.162Z,1478859999.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:39.550Z,1478859999.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:39.573Z,1478859999.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:39.930Z,1478859999.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:39.966Z,1478859999.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:40.333Z,1478860000.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:40.360Z,1478860000.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:40.753Z,1478860000.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:40.842Z,1478860000.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:41.129Z,1478860001.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:41.169Z,1478860001.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:41.533Z,1478860001.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:41.586Z,1478860001.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:41.937Z,1478860001.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:41.952Z,1478860001.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:42.333Z,1478860002.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:42.390Z,1478860002.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:42.733Z,1478860002.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:42.789Z,1478860002.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:43.145Z,1478860003.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:43.190Z,1478860003.190 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:43.190Z,1478860003.190 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93
2016-11-11T10:26:43.190Z,1478860003.190 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:26:43.198Z,1478860003.197 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:43.198Z,1478860003.198 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 93
2016-11-11T10:26:43.198Z,1478860003.198 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:26:43.200Z,1478860003.200 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:43.200Z,1478860003.200 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 93
2016-11-11T10:26:43.200Z,1478860003.200 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:26:43.238Z,1478860003.238 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:26:43.238Z,1478860003.238 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:26:43.239Z,1478860003.239 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:26:43.544Z,1478860003.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:43.604Z,1478860003.604 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:26:43.604Z,1478860003.605 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93
2016-11-11T10:26:43.605Z,1478860003.605 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:26:43.605Z,1478860003.605 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 93
2016-11-11T10:26:43.606Z,1478860003.606 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:26:43.606Z,1478860003.606 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 93
2016-11-11T10:26:43.952Z,1478860003.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:43.986Z,1478860003.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:26:43.987Z,1478860003.987 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:26:43.988Z,1478860003.987 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:26:43.996Z,1478860003.996 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:26:43.997Z,1478860003.997 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:26:43.997Z,1478860003.997 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:26:43.998Z,1478860003.997 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:26:43.998Z,1478860003.998 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:26:43.998Z,1478860003.998 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:26:44.344Z,1478860004.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:44.369Z,1478860004.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:44.749Z,1478860004.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:44.768Z,1478860004.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:45.143Z,1478860005.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:45.184Z,1478860005.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:45.529Z,1478860005.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:45.555Z,1478860005.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:45.929Z,1478860005.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:45.961Z,1478860005.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:46.329Z,1478860006.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:46.362Z,1478860006.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:46.729Z,1478860006.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:46.760Z,1478860006.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:47.141Z,1478860007.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:47.161Z,1478860007.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:47.533Z,1478860007.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:47.566Z,1478860007.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:47.929Z,1478860007.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:47.961Z,1478860007.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:48.329Z,1478860008.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:48.361Z,1478860008.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:48.758Z,1478860008.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:48.773Z,1478860008.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:49.151Z,1478860009.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:49.169Z,1478860009.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:49.548Z,1478860009.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:49.576Z,1478860009.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:49.952Z,1478860009.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:49.968Z,1478860009.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:50.338Z,1478860010.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:50.364Z,1478860010.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:50.737Z,1478860010.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:50.763Z,1478860010.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:51.134Z,1478860011.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:51.174Z,1478860011.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:51.529Z,1478860011.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:51.545Z,1478860011.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:51.930Z,1478860011.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:51.945Z,1478860011.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:52.332Z,1478860012.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:52.357Z,1478860012.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:52.741Z,1478860012.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:52.757Z,1478860012.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:53.137Z,1478860013.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:53.158Z,1478860013.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:53.532Z,1478860013.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:53.565Z,1478860013.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:53.951Z,1478860013.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:53.966Z,1478860013.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:54.350Z,1478860014.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:54.369Z,1478860014.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:54.752Z,1478860014.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:54.826Z,1478860014.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:55.156Z,1478860015.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:55.190Z,1478860015.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:55.529Z,1478860015.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:55.569Z,1478860015.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:55.929Z,1478860015.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:55.945Z,1478860015.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:56.330Z,1478860016.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:56.382Z,1478860016.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:56.729Z,1478860016.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:56.749Z,1478860016.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:57.140Z,1478860017.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:57.189Z,1478860017.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:57.534Z,1478860017.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:57.581Z,1478860017.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:57.932Z,1478860017.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:57.966Z,1478860017.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:58.343Z,1478860018.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:58.358Z,1478860018.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:58.742Z,1478860018.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:58.757Z,1478860018.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:59.157Z,1478860019.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:59.177Z,1478860019.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:59.544Z,1478860019.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:59.576Z,1478860019.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:26:59.950Z,1478860019.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:26:59.977Z,1478860019.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:00.344Z,1478860020.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:00.376Z,1478860020.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:00.737Z,1478860020.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:00.764Z,1478860020.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:01.129Z,1478860021.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:01.149Z,1478860021.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:01.533Z,1478860021.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:01.556Z,1478860021.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:01.933Z,1478860021.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:01.955Z,1478860021.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:02.338Z,1478860022.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:02.353Z,1478860022.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:02.743Z,1478860022.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:02.759Z,1478860022.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:03.140Z,1478860023.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:03.156Z,1478860023.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:03.529Z,1478860023.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:03.564Z,1478860023.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:03.929Z,1478860023.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:03.961Z,1478860023.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:04.351Z,1478860024.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:04.367Z,1478860024.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:04.748Z,1478860024.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:04.764Z,1478860024.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:05.148Z,1478860025.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:05.176Z,1478860025.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:05.540Z,1478860025.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:05.574Z,1478860025.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:05.929Z,1478860025.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:05.990Z,1478860025.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:06.334Z,1478860026.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:06.354Z,1478860026.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:06.741Z,1478860026.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:06.761Z,1478860026.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:07.132Z,1478860027.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:07.165Z,1478860027.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:07.537Z,1478860027.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:07.565Z,1478860027.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:07.945Z,1478860027.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:07.965Z,1478860027.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:08.329Z,1478860028.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:08.362Z,1478860028.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:08.746Z,1478860028.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:08.778Z,1478860028.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:09.130Z,1478860029.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:09.165Z,1478860029.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:09.553Z,1478860029.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:09.590Z,1478860029.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:09.940Z,1478860029.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:09.975Z,1478860029.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:10.347Z,1478860030.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:10.382Z,1478860030.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:10.744Z,1478860030.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:10.780Z,1478860030.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:11.137Z,1478860031.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:11.177Z,1478860031.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:11.529Z,1478860031.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:11.549Z,1478860031.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:11.935Z,1478860031.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:11.978Z,1478860031.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:12.340Z,1478860032.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:12.356Z,1478860032.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:12.742Z,1478860032.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:12.759Z,1478860032.759 [BPC1](ERROR): Failed to receive battery data
2016-11-11T10:27:12.759Z,1478860032.759 [BPC1] Communications Fault, FailCount= 1
2016-11-11T10:27:12.759Z,1478860032.759 [BPC1](ERROR): Communications Fault
2016-11-11T10:27:12.804Z,1478860032.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:12.860Z,1478860032.861 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T10:27:13.139Z,1478860033.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:13.155Z,1478860033.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:13.533Z,1478860033.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:13.565Z,1478860033.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:13.937Z,1478860033.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:13.952Z,1478860033.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:13.973Z,1478860033.973 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:27:13.973Z,1478860033.973 [BPC1] No Fault, FailCount= 1
2016-11-11T10:27:14.329Z,1478860034.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:14.410Z,1478860034.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:14.753Z,1478860034.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:14.801Z,1478860034.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:15.151Z,1478860035.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:15.166Z,1478860035.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:15.551Z,1478860035.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:15.568Z,1478860035.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:15.944Z,1478860035.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:15.977Z,1478860035.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:16.329Z,1478860036.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:16.362Z,1478860036.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:16.729Z,1478860036.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:16.761Z,1478860036.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:17.129Z,1478860037.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:17.179Z,1478860037.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:17.529Z,1478860037.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:17.545Z,1478860037.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:17.929Z,1478860037.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:17.949Z,1478860037.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:18.329Z,1478860038.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:18.349Z,1478860038.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:18.741Z,1478860038.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:18.776Z,1478860038.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:19.138Z,1478860039.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:19.153Z,1478860039.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:19.534Z,1478860039.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:19.553Z,1478860039.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:19.943Z,1478860039.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:19.959Z,1478860039.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:20.340Z,1478860040.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:20.365Z,1478860040.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:20.752Z,1478860040.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:20.767Z,1478860040.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:21.149Z,1478860041.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:21.169Z,1478860041.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:21.530Z,1478860041.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:21.561Z,1478860041.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:21.929Z,1478860041.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:21.969Z,1478860041.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:22.329Z,1478860042.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:22.349Z,1478860042.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:22.749Z,1478860042.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:22.781Z,1478860042.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:23.133Z,1478860043.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:23.149Z,1478860043.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:23.535Z,1478860043.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:23.555Z,1478860043.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:27.152Z,1478860047.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:27.229Z,1478860047.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:27.335Z,1478860047.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:27.377Z,1478860047.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:27.714Z,1478860047.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:27.730Z,1478860047.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:28.125Z,1478860048.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:28.145Z,1478860048.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:28.539Z,1478860048.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:28.622Z,1478860048.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:28.916Z,1478860048.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:28.932Z,1478860048.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:29.317Z,1478860049.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:29.370Z,1478860049.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:29.706Z,1478860049.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:29.767Z,1478860049.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:30.116Z,1478860050.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:30.139Z,1478860050.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:30.523Z,1478860050.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:30.576Z,1478860050.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:30.909Z,1478860050.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:30.937Z,1478860050.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:31.316Z,1478860051.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:31.345Z,1478860051.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:31.716Z,1478860051.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:31.733Z,1478860051.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:32.112Z,1478860052.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:32.138Z,1478860052.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:32.528Z,1478860052.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:32.588Z,1478860052.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:32.906Z,1478860052.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:32.949Z,1478860052.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:33.308Z,1478860053.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:33.331Z,1478860053.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:33.710Z,1478860053.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:33.726Z,1478860053.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:34.105Z,1478860054.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:34.125Z,1478860054.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:34.519Z,1478860054.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:34.574Z,1478860054.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:34.914Z,1478860054.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:34.933Z,1478860054.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:35.315Z,1478860055.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:35.330Z,1478860055.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:35.708Z,1478860055.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:35.732Z,1478860055.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:36.114Z,1478860056.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:36.137Z,1478860056.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:36.531Z,1478860056.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:36.546Z,1478860056.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:36.920Z,1478860056.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:36.953Z,1478860056.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:37.310Z,1478860057.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:37.342Z,1478860057.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:37.712Z,1478860057.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:37.733Z,1478860057.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:38.109Z,1478860058.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:38.141Z,1478860058.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:38.509Z,1478860058.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:38.531Z,1478860058.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:38.905Z,1478860058.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:38.932Z,1478860058.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:39.316Z,1478860059.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:39.342Z,1478860059.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:39.714Z,1478860059.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:39.746Z,1478860059.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:40.139Z,1478860060.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:40.161Z,1478860060.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:40.510Z,1478860060.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:40.561Z,1478860060.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:40.913Z,1478860060.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:40.938Z,1478860060.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:41.307Z,1478860061.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:41.349Z,1478860061.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:41.712Z,1478860061.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:41.757Z,1478860061.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:42.106Z,1478860062.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:42.165Z,1478860062.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:42.590Z,1478860062.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:42.630Z,1478860062.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:42.909Z,1478860062.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:42.954Z,1478860062.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:43.310Z,1478860063.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:43.370Z,1478860063.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:43.723Z,1478860063.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:43.785Z,1478860063.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:44.117Z,1478860064.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:44.173Z,1478860064.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:44.574Z,1478860064.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:44.669Z,1478860064.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:44.912Z,1478860064.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:44.953Z,1478860064.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:45.329Z,1478860065.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:45.370Z,1478860065.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:45.730Z,1478860065.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:45.754Z,1478860065.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:46.105Z,1478860066.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:46.149Z,1478860066.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:46.537Z,1478860066.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:46.555Z,1478860066.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:46.907Z,1478860066.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:46.938Z,1478860066.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:47.308Z,1478860067.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:47.364Z,1478860067.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:47.710Z,1478860067.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:47.751Z,1478860067.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:48.106Z,1478860068.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:48.126Z,1478860068.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:48.519Z,1478860068.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:48.570Z,1478860068.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:48.920Z,1478860068.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:48.944Z,1478860068.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:49.323Z,1478860069.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:49.356Z,1478860069.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:49.722Z,1478860069.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:49.761Z,1478860069.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:50.119Z,1478860070.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:50.154Z,1478860070.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:50.520Z,1478860070.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:50.562Z,1478860070.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:50.921Z,1478860070.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:50.938Z,1478860070.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:51.334Z,1478860071.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:51.350Z,1478860071.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:51.714Z,1478860071.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:51.749Z,1478860071.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:52.113Z,1478860072.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:52.160Z,1478860072.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:52.512Z,1478860072.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:52.528Z,1478860072.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:52.913Z,1478860072.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:52.929Z,1478860072.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:53.322Z,1478860073.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:53.374Z,1478860073.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:53.480Z,1478860073.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:53.717Z,1478860073.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:53.733Z,1478860073.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:54.120Z,1478860074.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:54.136Z,1478860074.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:54.278Z,1478860074.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:54.535Z,1478860074.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:54.550Z,1478860074.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:54.905Z,1478860074.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:54.950Z,1478860074.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:55.308Z,1478860075.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:55.385Z,1478860075.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:55.714Z,1478860075.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:55.733Z,1478860075.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:56.113Z,1478860076.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:56.129Z,1478860076.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:56.520Z,1478860076.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:56.573Z,1478860076.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:56.905Z,1478860076.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:56.948Z,1478860076.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:57.326Z,1478860077.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:57.379Z,1478860077.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:57.720Z,1478860077.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:57.739Z,1478860077.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:58.105Z,1478860078.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:58.169Z,1478860078.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:58.524Z,1478860078.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:58.577Z,1478860078.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:58.924Z,1478860078.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:58.956Z,1478860078.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:59.312Z,1478860079.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:59.328Z,1478860079.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:27:59.709Z,1478860079.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:27:59.737Z,1478860079.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:00.121Z,1478860080.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:00.136Z,1478860080.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:00.520Z,1478860080.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:00.547Z,1478860080.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:00.917Z,1478860080.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:01.051Z,1478860081.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:01.310Z,1478860081.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:01.350Z,1478860081.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:01.719Z,1478860081.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:01.764Z,1478860081.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:02.111Z,1478860082.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:02.151Z,1478860082.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:02.512Z,1478860082.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:02.566Z,1478860082.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:02.917Z,1478860082.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:02.957Z,1478860082.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:03.318Z,1478860083.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:03.357Z,1478860083.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:03.714Z,1478860083.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:03.738Z,1478860083.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:04.116Z,1478860084.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:04.145Z,1478860084.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:04.507Z,1478860084.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:04.546Z,1478860084.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:04.910Z,1478860084.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:04.978Z,1478860084.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:05.315Z,1478860085.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:05.368Z,1478860085.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:05.717Z,1478860085.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:05.766Z,1478860085.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:06.108Z,1478860086.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:06.158Z,1478860086.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:06.508Z,1478860086.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:06.558Z,1478860086.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:06.924Z,1478860086.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:07.030Z,1478860087.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:07.316Z,1478860087.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:07.346Z,1478860087.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:07.707Z,1478860087.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:07.749Z,1478860087.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:08.119Z,1478860088.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:08.172Z,1478860088.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:08.516Z,1478860088.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:08.542Z,1478860088.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:08.952Z,1478860088.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:09.012Z,1478860089.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:09.312Z,1478860089.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:09.394Z,1478860089.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:09.713Z,1478860089.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:09.758Z,1478860089.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:10.116Z,1478860090.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:10.145Z,1478860090.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:10.520Z,1478860090.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:10.614Z,1478860090.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:10.907Z,1478860090.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:10.954Z,1478860090.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:11.322Z,1478860091.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:11.403Z,1478860091.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:11.718Z,1478860091.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:11.757Z,1478860091.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:12.112Z,1478860092.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:12.173Z,1478860092.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:12.516Z,1478860092.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:12.567Z,1478860092.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:12.908Z,1478860092.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:12.962Z,1478860092.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:13.307Z,1478860093.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:13.329Z,1478860093.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:13.711Z,1478860093.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:13.773Z,1478860093.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:14.120Z,1478860094.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:14.174Z,1478860094.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:14.519Z,1478860094.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:14.568Z,1478860094.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:14.917Z,1478860094.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:14.938Z,1478860094.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:15.308Z,1478860095.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:15.336Z,1478860095.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:15.726Z,1478860095.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:15.745Z,1478860095.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:16.126Z,1478860096.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:16.149Z,1478860096.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:16.509Z,1478860096.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:16.552Z,1478860096.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:16.909Z,1478860096.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:16.936Z,1478860096.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:17.313Z,1478860097.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:17.340Z,1478860097.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:17.705Z,1478860097.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:17.741Z,1478860097.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:18.105Z,1478860098.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:18.141Z,1478860098.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:18.506Z,1478860098.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:18.567Z,1478860098.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:18.917Z,1478860098.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:18.938Z,1478860098.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:19.313Z,1478860099.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:19.328Z,1478860099.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:19.708Z,1478860099.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:19.740Z,1478860099.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:20.108Z,1478860100.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:20.136Z,1478860100.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:20.524Z,1478860100.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:20.552Z,1478860100.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:20.945Z,1478860100.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:20.989Z,1478860100.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:21.309Z,1478860101.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:21.345Z,1478860101.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:21.713Z,1478860101.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:21.745Z,1478860101.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:22.105Z,1478860102.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:22.125Z,1478860102.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:22.505Z,1478860102.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:22.525Z,1478860102.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:22.934Z,1478860102.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:22.986Z,1478860102.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:23.313Z,1478860103.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:23.385Z,1478860103.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:23.706Z,1478860103.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:23.738Z,1478860103.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:27.132Z,1478860107.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:27.166Z,1478860107.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:27.269Z,1478860107.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:27.297Z,1478860107.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:27.669Z,1478860107.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:27.707Z,1478860107.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:28.070Z,1478860108.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:28.102Z,1478860108.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:28.475Z,1478860108.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:28.556Z,1478860108.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:28.869Z,1478860108.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:28.909Z,1478860108.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:29.278Z,1478860109.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:29.352Z,1478860109.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:29.669Z,1478860109.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:29.718Z,1478860109.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:30.069Z,1478860110.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:30.105Z,1478860110.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:30.477Z,1478860110.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:30.517Z,1478860110.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:30.874Z,1478860110.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:30.905Z,1478860110.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:31.269Z,1478860111.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:31.289Z,1478860111.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:31.673Z,1478860111.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:31.696Z,1478860111.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:32.072Z,1478860112.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:32.105Z,1478860112.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:32.476Z,1478860112.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:32.497Z,1478860112.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:32.886Z,1478860112.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:32.902Z,1478860112.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:33.016Z,1478860113.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:33.269Z,1478860113.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:33.301Z,1478860113.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:33.669Z,1478860113.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:33.703Z,1478860113.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:33.812Z,1478860113.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:34.086Z,1478860114.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:34.102Z,1478860114.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:34.454Z,1478860114.454 [NAL9602](INFO): SBD MO Status=2, MOMSN=342, MT Status=2, MTMSN=0
2016-11-11T10:28:34.454Z,1478860114.454 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T10:28:34.471Z,1478860114.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:34.507Z,1478860114.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:34.912Z,1478860114.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:34.965Z,1478860114.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:35.270Z,1478860115.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:35.301Z,1478860115.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:35.669Z,1478860115.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:35.709Z,1478860115.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:36.069Z,1478860116.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:36.089Z,1478860116.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:36.474Z,1478860116.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:36.490Z,1478860116.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:36.906Z,1478860116.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:36.945Z,1478860116.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:37.273Z,1478860117.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:37.299Z,1478860117.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:37.678Z,1478860117.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:37.705Z,1478860117.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:38.069Z,1478860118.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:38.101Z,1478860118.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:38.478Z,1478860118.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:38.510Z,1478860118.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:38.887Z,1478860118.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:38.922Z,1478860118.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:39.280Z,1478860119.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:39.313Z,1478860119.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:39.677Z,1478860119.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:39.714Z,1478860119.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:40.074Z,1478860120.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:40.110Z,1478860120.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:40.470Z,1478860120.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:40.566Z,1478860120.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:40.873Z,1478860120.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:40.893Z,1478860120.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:41.278Z,1478860121.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:41.294Z,1478860121.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:41.696Z,1478860121.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:41.749Z,1478860121.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:42.080Z,1478860122.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:42.101Z,1478860122.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:42.480Z,1478860122.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:42.498Z,1478860122.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:42.873Z,1478860122.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:42.921Z,1478860122.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:43.285Z,1478860123.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:43.299Z,1478860123.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:43.675Z,1478860123.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:43.729Z,1478860123.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:44.074Z,1478860124.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:44.125Z,1478860124.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:44.479Z,1478860124.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:44.494Z,1478860124.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:44.879Z,1478860124.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:44.911Z,1478860124.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:45.278Z,1478860125.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:45.298Z,1478860125.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:45.668Z,1478860125.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:45.701Z,1478860125.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:46.069Z,1478860126.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:46.086Z,1478860126.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:46.469Z,1478860126.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:46.545Z,1478860126.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:46.881Z,1478860126.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:46.901Z,1478860126.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:47.276Z,1478860127.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:47.298Z,1478860127.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:47.672Z,1478860127.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:47.705Z,1478860127.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:47.792Z,1478860127.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:48.073Z,1478860128.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:48.088Z,1478860128.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:48.470Z,1478860128.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:48.485Z,1478860128.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:48.588Z,1478860128.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:48.892Z,1478860128.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:48.923Z,1478860128.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:49.273Z,1478860129.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:49.293Z,1478860129.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:49.666Z,1478860129.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:49.681Z,1478860129.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:50.084Z,1478860130.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:50.102Z,1478860130.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:50.488Z,1478860130.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:50.504Z,1478860130.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:50.898Z,1478860130.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:50.924Z,1478860130.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:51.273Z,1478860131.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:51.293Z,1478860131.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:51.673Z,1478860131.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:51.693Z,1478860131.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:52.070Z,1478860132.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:52.085Z,1478860132.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:52.474Z,1478860132.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:52.493Z,1478860132.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:52.874Z,1478860132.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:52.893Z,1478860132.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:53.274Z,1478860133.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:53.289Z,1478860133.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:53.670Z,1478860133.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:53.686Z,1478860133.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:54.073Z,1478860134.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:54.093Z,1478860134.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:54.470Z,1478860134.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:54.513Z,1478860134.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:54.873Z,1478860134.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:54.893Z,1478860134.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:55.274Z,1478860135.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:55.330Z,1478860135.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:55.674Z,1478860135.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:55.689Z,1478860135.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:56.073Z,1478860136.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:56.117Z,1478860136.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:56.471Z,1478860136.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:56.501Z,1478860136.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:56.870Z,1478860136.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:56.894Z,1478860136.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:57.270Z,1478860137.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:57.317Z,1478860137.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:57.669Z,1478860137.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:57.689Z,1478860137.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:58.084Z,1478860138.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:58.171Z,1478860138.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:58.481Z,1478860138.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:58.523Z,1478860138.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:58.877Z,1478860138.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:58.893Z,1478860138.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:59.284Z,1478860139.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:59.299Z,1478860139.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:28:59.682Z,1478860139.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:28:59.714Z,1478860139.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:00.076Z,1478860140.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:00.101Z,1478860140.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:00.491Z,1478860140.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:00.543Z,1478860140.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:00.869Z,1478860140.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:00.889Z,1478860140.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:01.272Z,1478860141.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:01.293Z,1478860141.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:01.669Z,1478860141.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:01.719Z,1478860141.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:02.078Z,1478860142.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:02.094Z,1478860142.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:02.474Z,1478860142.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:02.490Z,1478860142.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:02.886Z,1478860142.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:02.929Z,1478860142.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:03.272Z,1478860143.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:03.305Z,1478860143.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:03.669Z,1478860143.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:03.701Z,1478860143.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:04.069Z,1478860144.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:04.103Z,1478860144.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:04.469Z,1478860144.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:04.503Z,1478860144.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:04.887Z,1478860144.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:04.919Z,1478860144.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:05.269Z,1478860145.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:05.302Z,1478860145.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:05.669Z,1478860145.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:05.702Z,1478860145.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:06.069Z,1478860146.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:06.105Z,1478860146.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:06.469Z,1478860146.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:06.509Z,1478860146.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:06.900Z,1478860146.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:06.915Z,1478860146.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:07.288Z,1478860147.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:07.321Z,1478860147.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:07.674Z,1478860147.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:07.689Z,1478860147.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:08.073Z,1478860148.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:08.093Z,1478860148.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:08.485Z,1478860148.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:08.520Z,1478860148.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:08.877Z,1478860148.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:08.892Z,1478860148.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:09.279Z,1478860149.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:09.329Z,1478860149.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:09.672Z,1478860149.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:09.710Z,1478860149.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:10.077Z,1478860150.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:10.094Z,1478860150.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:10.485Z,1478860150.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:10.545Z,1478860150.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:10.873Z,1478860150.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:10.899Z,1478860150.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:11.291Z,1478860151.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:11.313Z,1478860151.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:11.688Z,1478860151.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:11.745Z,1478860151.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:12.073Z,1478860152.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:12.099Z,1478860152.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:12.478Z,1478860152.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:12.545Z,1478860152.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:12.873Z,1478860152.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:12.929Z,1478860152.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:13.273Z,1478860153.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:13.299Z,1478860153.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:13.669Z,1478860153.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:13.706Z,1478860153.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:14.078Z,1478860154.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:14.104Z,1478860154.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:14.492Z,1478860154.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:14.530Z,1478860154.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:14.869Z,1478860154.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:14.889Z,1478860154.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:15.284Z,1478860155.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:15.299Z,1478860155.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:15.680Z,1478860155.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:15.696Z,1478860155.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:16.078Z,1478860156.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:16.092Z,1478860156.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:16.477Z,1478860156.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:16.498Z,1478860156.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:16.885Z,1478860156.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:16.934Z,1478860156.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:17.278Z,1478860157.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:17.293Z,1478860157.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:17.677Z,1478860157.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:17.699Z,1478860157.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:18.089Z,1478860158.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:18.117Z,1478860158.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:18.469Z,1478860158.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:18.505Z,1478860158.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:18.876Z,1478860158.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:18.928Z,1478860158.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:19.273Z,1478860159.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:19.293Z,1478860159.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:19.688Z,1478860159.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:19.729Z,1478860159.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:20.080Z,1478860160.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:20.095Z,1478860160.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:20.490Z,1478860160.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:20.531Z,1478860160.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:20.874Z,1478860160.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:20.898Z,1478860160.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:21.272Z,1478860161.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:21.305Z,1478860161.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:21.686Z,1478860161.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:21.701Z,1478860161.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:22.084Z,1478860162.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:22.100Z,1478860162.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:22.470Z,1478860162.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:22.510Z,1478860162.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:22.870Z,1478860162.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:22.902Z,1478860162.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:22.924Z,1478860162.924 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T10:24:22.9Z
2016-11-11T10:29:22.924Z,1478860162.924 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T10:29:22.924Z,1478860162.924 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T10:29:23.270Z,1478860163.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:23.310Z,1478860163.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:24.110Z,1478860164.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:24.173Z,1478860164.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:24.270Z,1478860164.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:24.340Z,1478860164.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:27.569Z,1478860167.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:27.606Z,1478860167.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:27.893Z,1478860167.893 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0132.lzma
2016-11-11T10:29:27.957Z,1478860167.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:27.984Z,1478860167.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:28.090Z,1478860168.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:28.121Z,1478860168.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:28.472Z,1478860168.472 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0132.lzma.bak
2016-11-11T10:29:28.472Z,1478860168.472 [DataOverHttps](INFO): SBD MOMSN=4555320
2016-11-11T10:29:28.538Z,1478860168.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:28.593Z,1478860168.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:29.752Z,1478860169.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:29.777Z,1478860169.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:29.886Z,1478860169.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:29.945Z,1478860169.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:33.380Z,1478860173.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:33.433Z,1478860173.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:33.543Z,1478860173.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:33.562Z,1478860173.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:33.895Z,1478860173.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:33.911Z,1478860173.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:34.303Z,1478860174.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:34.390Z,1478860174.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:34.708Z,1478860174.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:34.737Z,1478860174.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:35.088Z,1478860175.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:35.104Z,1478860175.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:38.869Z,1478860178.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:38.885Z,1478860178.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:54.054Z,1478860194.054 [DataOverHttps](INFO): Sending 164 bytes from file Logs/20161111T044527/Express0133.lzma
2016-11-11T10:29:54.074Z,1478860194.074 [NAL9602](INFO): SBD MO Status=2, MOMSN=342, MT Status=2, MTMSN=0
2016-11-11T10:29:54.075Z,1478860194.075 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T10:29:54.092Z,1478860194.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:54.103Z,1478860194.103 [BPC1](ERROR): Failed to receive battery data
2016-11-11T10:29:54.103Z,1478860194.103 [BPC1] Communications Fault, FailCount= 1
2016-11-11T10:29:54.103Z,1478860194.103 [BPC1](ERROR): Communications Fault
2016-11-11T10:29:54.112Z,1478860194.112 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:54.112Z,1478860194.112 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94
2016-11-11T10:29:54.112Z,1478860194.112 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:29:54.152Z,1478860194.152 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:54.152Z,1478860194.152 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 94
2016-11-11T10:29:54.152Z,1478860194.152 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:29:54.154Z,1478860194.154 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:54.154Z,1478860194.154 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 94
2016-11-11T10:29:54.154Z,1478860194.154 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:29:54.184Z,1478860194.184 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:29:54.185Z,1478860194.185 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:29:54.185Z,1478860194.185 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:29:54.185Z,1478860194.185 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T10:29:54.242Z,1478860194.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:54.407Z,1478860194.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:29:54.407Z,1478860194.407 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94
2016-11-11T10:29:54.409Z,1478860194.409 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:29:54.409Z,1478860194.409 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 94
2016-11-11T10:29:54.409Z,1478860194.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:29:54.409Z,1478860194.409 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 94
2016-11-11T10:29:57.518Z,1478860197.518 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0133.lzma.bak
2016-11-11T10:29:57.518Z,1478860197.518 [DataOverHttps](INFO): SBD MOMSN=4555322
2016-11-11T10:29:57.592Z,1478860197.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:57.609Z,1478860197.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:29:57.610Z,1478860197.610 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:29:57.610Z,1478860197.610 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:29:57.615Z,1478860197.615 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:29:57.615Z,1478860197.615 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:29:57.615Z,1478860197.615 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:29:57.616Z,1478860197.616 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:29:57.616Z,1478860197.616 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:29:57.617Z,1478860197.617 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:29:58.646Z,1478860198.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:58.665Z,1478860198.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:29:58.674Z,1478860198.674 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T10:29:58.674Z,1478860198.674 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T10:29:58.674Z,1478860198.674 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T10:29:58.701Z,1478860198.701 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:29:58.701Z,1478860198.701 [BPC1] No Fault, FailCount= 1
2016-11-11T10:29:58.796Z,1478860198.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:29:58.919Z,1478860198.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:02.075Z,1478860202.075 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T10:30:02.094Z,1478860202.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:02.150Z,1478860202.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:02.260Z,1478860202.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:02.329Z,1478860202.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:02.630Z,1478860202.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:02.665Z,1478860202.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:03.033Z,1478860203.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:03.089Z,1478860203.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:03.432Z,1478860203.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:03.454Z,1478860203.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:03.834Z,1478860203.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:03.857Z,1478860203.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:04.226Z,1478860204.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:04.293Z,1478860204.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:04.631Z,1478860204.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:04.672Z,1478860204.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:05.029Z,1478860205.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:05.056Z,1478860205.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:05.440Z,1478860205.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:05.455Z,1478860205.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:05.834Z,1478860205.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:05.850Z,1478860205.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:06.269Z,1478860206.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:06.316Z,1478860206.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:06.630Z,1478860206.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:06.661Z,1478860206.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:07.027Z,1478860207.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:07.081Z,1478860207.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:07.417Z,1478860207.417 [NAL9602](INFO): Powering down
2016-11-11T10:30:07.448Z,1478860207.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:07.484Z,1478860207.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:07.832Z,1478860207.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:07.858Z,1478860207.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:08.293Z,1478860208.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:08.303Z,1478860208.303 [PNI_TCM](ERROR): CRC does not match. Expected:0x59350 got:0x54090
2016-11-11T10:30:08.342Z,1478860208.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:08.631Z,1478860208.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:08.657Z,1478860208.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:09.027Z,1478860209.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:09.061Z,1478860209.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:09.425Z,1478860209.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:09.460Z,1478860209.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:09.831Z,1478860209.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:09.859Z,1478860209.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:10.227Z,1478860210.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:10.261Z,1478860210.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:10.626Z,1478860210.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:10.642Z,1478860210.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:11.039Z,1478860211.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:11.065Z,1478860211.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:11.435Z,1478860211.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:11.450Z,1478860211.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:11.840Z,1478860211.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:11.855Z,1478860211.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:12.232Z,1478860212.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:12.253Z,1478860212.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:12.634Z,1478860212.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:12.651Z,1478860212.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:13.027Z,1478860213.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:13.063Z,1478860213.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:13.439Z,1478860213.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:13.461Z,1478860213.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:13.829Z,1478860213.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:13.865Z,1478860213.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:14.225Z,1478860214.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:14.306Z,1478860214.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:14.636Z,1478860214.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:14.668Z,1478860214.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:15.038Z,1478860215.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:15.057Z,1478860215.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:15.434Z,1478860215.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:15.450Z,1478860215.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:15.832Z,1478860215.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:15.883Z,1478860215.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:16.258Z,1478860216.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:16.306Z,1478860216.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:16.626Z,1478860216.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:16.673Z,1478860216.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:17.028Z,1478860217.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:17.075Z,1478860217.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:17.427Z,1478860217.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:17.466Z,1478860217.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:17.831Z,1478860217.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:17.848Z,1478860217.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:18.285Z,1478860218.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:18.313Z,1478860218.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:18.633Z,1478860218.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:18.649Z,1478860218.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:19.033Z,1478860219.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:19.054Z,1478860219.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:19.432Z,1478860219.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:19.460Z,1478860219.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:19.832Z,1478860219.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:19.853Z,1478860219.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:20.246Z,1478860220.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:20.291Z,1478860220.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:20.627Z,1478860220.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:20.661Z,1478860220.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:21.027Z,1478860221.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:21.061Z,1478860221.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:21.425Z,1478860221.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:21.457Z,1478860221.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:21.825Z,1478860221.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:21.860Z,1478860221.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:22.267Z,1478860222.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:22.315Z,1478860222.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:22.627Z,1478860222.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:22.665Z,1478860222.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:23.025Z,1478860223.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:23.068Z,1478860223.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:23.425Z,1478860223.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:23.468Z,1478860223.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:23.827Z,1478860223.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:23.843Z,1478860223.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:24.226Z,1478860224.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:24.242Z,1478860224.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:24.625Z,1478860224.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:24.654Z,1478860224.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:25.032Z,1478860225.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:25.048Z,1478860225.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:25.435Z,1478860225.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:25.462Z,1478860225.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:25.832Z,1478860225.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:25.858Z,1478860225.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:26.232Z,1478860226.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:26.248Z,1478860226.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:26.625Z,1478860226.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:26.657Z,1478860226.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:27.029Z,1478860227.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:27.053Z,1478860227.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:27.432Z,1478860227.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:27.448Z,1478860227.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:27.825Z,1478860227.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:27.885Z,1478860227.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:28.237Z,1478860228.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:28.252Z,1478860228.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:28.632Z,1478860228.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:28.653Z,1478860228.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:29.031Z,1478860229.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:29.050Z,1478860229.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:29.436Z,1478860229.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:29.497Z,1478860229.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:29.825Z,1478860229.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:29.857Z,1478860229.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:30.257Z,1478860230.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:30.301Z,1478860230.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:30.631Z,1478860230.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:30.680Z,1478860230.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:31.031Z,1478860231.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:31.046Z,1478860231.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:31.431Z,1478860231.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:31.479Z,1478860231.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:31.831Z,1478860231.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:31.884Z,1478860231.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:32.283Z,1478860232.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:32.306Z,1478860232.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:32.628Z,1478860232.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:32.658Z,1478860232.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:33.031Z,1478860233.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:33.062Z,1478860233.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:33.436Z,1478860233.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:33.451Z,1478860233.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:33.833Z,1478860233.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:33.853Z,1478860233.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:34.246Z,1478860234.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:34.290Z,1478860234.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:34.628Z,1478860234.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:34.644Z,1478860234.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:35.028Z,1478860235.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:35.050Z,1478860235.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:35.428Z,1478860235.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:35.457Z,1478860235.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:35.832Z,1478860235.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:35.914Z,1478860235.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:36.260Z,1478860236.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:36.310Z,1478860236.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:36.636Z,1478860236.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:36.657Z,1478860236.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:37.025Z,1478860237.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:37.057Z,1478860237.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:37.425Z,1478860237.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:37.458Z,1478860237.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:37.829Z,1478860237.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:37.856Z,1478860237.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:38.225Z,1478860238.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:38.257Z,1478860238.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:38.625Z,1478860238.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:38.661Z,1478860238.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:39.025Z,1478860239.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:39.064Z,1478860239.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:39.425Z,1478860239.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:39.453Z,1478860239.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:39.825Z,1478860239.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:39.865Z,1478860239.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:40.233Z,1478860240.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:40.274Z,1478860240.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:40.631Z,1478860240.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:40.700Z,1478860240.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:41.032Z,1478860241.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:41.064Z,1478860241.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:41.432Z,1478860241.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:41.448Z,1478860241.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:41.833Z,1478860241.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:41.849Z,1478860241.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:42.225Z,1478860242.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:42.257Z,1478860242.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:42.625Z,1478860242.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:42.738Z,1478860242.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:43.031Z,1478860243.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:43.047Z,1478860243.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:43.437Z,1478860243.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:43.457Z,1478860243.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:43.836Z,1478860243.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:43.897Z,1478860243.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:44.239Z,1478860244.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:44.272Z,1478860244.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:44.625Z,1478860244.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:44.669Z,1478860244.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:45.025Z,1478860245.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:45.065Z,1478860245.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:45.425Z,1478860245.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:45.477Z,1478860245.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:45.836Z,1478860245.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:45.880Z,1478860245.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:46.240Z,1478860246.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:46.256Z,1478860246.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:46.632Z,1478860246.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:46.648Z,1478860246.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:47.032Z,1478860247.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:47.047Z,1478860247.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:47.440Z,1478860247.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:47.456Z,1478860247.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:47.833Z,1478860247.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:47.849Z,1478860247.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:48.238Z,1478860248.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:48.254Z,1478860248.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:48.632Z,1478860248.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:48.655Z,1478860248.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:49.025Z,1478860249.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:49.086Z,1478860249.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:49.425Z,1478860249.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:49.468Z,1478860249.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:49.825Z,1478860249.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:49.865Z,1478860249.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:50.242Z,1478860250.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:50.290Z,1478860250.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:50.633Z,1478860250.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:50.648Z,1478860250.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:51.030Z,1478860251.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:51.058Z,1478860251.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:51.425Z,1478860251.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:51.451Z,1478860251.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:51.825Z,1478860251.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:51.882Z,1478860251.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:52.224Z,1478860252.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:52.294Z,1478860252.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:52.632Z,1478860252.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:52.648Z,1478860252.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:53.033Z,1478860253.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:53.053Z,1478860253.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:53.437Z,1478860253.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:53.457Z,1478860253.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:53.837Z,1478860253.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:53.853Z,1478860253.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:54.226Z,1478860254.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:54.261Z,1478860254.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:54.667Z,1478860254.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:54.716Z,1478860254.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:55.025Z,1478860255.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:55.061Z,1478860255.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:55.425Z,1478860255.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:55.470Z,1478860255.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:55.825Z,1478860255.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:55.842Z,1478860255.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:56.225Z,1478860256.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:56.246Z,1478860256.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:56.634Z,1478860256.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:56.711Z,1478860256.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:57.032Z,1478860257.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:57.054Z,1478860257.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:57.435Z,1478860257.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:57.456Z,1478860257.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:57.825Z,1478860257.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:57.874Z,1478860257.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:58.231Z,1478860258.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:58.285Z,1478860258.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:58.632Z,1478860258.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:58.648Z,1478860258.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:59.029Z,1478860259.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:59.085Z,1478860259.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:30:59.426Z,1478860259.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:30:59.463Z,1478860259.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:02.949Z,1478860262.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:03.003Z,1478860263.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:03.109Z,1478860263.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:03.158Z,1478860263.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:03.460Z,1478860263.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:03.518Z,1478860263.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:03.862Z,1478860263.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:03.878Z,1478860263.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:04.267Z,1478860264.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:04.305Z,1478860264.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:04.657Z,1478860264.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:04.688Z,1478860264.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:05.061Z,1478860265.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:05.077Z,1478860265.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:05.454Z,1478860265.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:05.489Z,1478860265.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:05.853Z,1478860265.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:05.887Z,1478860265.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:06.272Z,1478860266.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:06.320Z,1478860266.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:06.653Z,1478860266.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:06.693Z,1478860266.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:06.764Z,1478860266.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:07.053Z,1478860267.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:07.068Z,1478860267.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:07.453Z,1478860267.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:07.477Z,1478860267.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:07.560Z,1478860267.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:07.860Z,1478860267.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:07.877Z,1478860267.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:08.259Z,1478860268.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:08.277Z,1478860268.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:08.666Z,1478860268.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:08.694Z,1478860268.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:09.053Z,1478860269.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:09.086Z,1478860269.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:09.460Z,1478860269.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:09.484Z,1478860269.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:09.853Z,1478860269.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:09.888Z,1478860269.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:10.253Z,1478860270.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:10.287Z,1478860270.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:10.668Z,1478860270.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:10.693Z,1478860270.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:11.057Z,1478860271.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:11.083Z,1478860271.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:11.460Z,1478860271.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:11.485Z,1478860271.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:11.853Z,1478860271.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:11.889Z,1478860271.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:12.285Z,1478860272.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:12.301Z,1478860272.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:12.665Z,1478860272.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:12.696Z,1478860272.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:13.060Z,1478860273.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:13.095Z,1478860273.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:13.460Z,1478860273.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:13.484Z,1478860273.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:13.853Z,1478860273.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:13.913Z,1478860273.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:14.256Z,1478860274.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:14.284Z,1478860274.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:14.664Z,1478860274.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:14.680Z,1478860274.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:15.053Z,1478860275.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:15.087Z,1478860275.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:15.453Z,1478860275.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:15.489Z,1478860275.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:15.858Z,1478860275.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:15.913Z,1478860275.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:16.261Z,1478860276.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:16.282Z,1478860276.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:16.655Z,1478860276.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:16.687Z,1478860276.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:17.060Z,1478860277.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:17.111Z,1478860277.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:17.460Z,1478860277.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:17.481Z,1478860277.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:17.853Z,1478860277.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:17.914Z,1478860277.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:18.268Z,1478860278.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:18.323Z,1478860278.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:18.653Z,1478860278.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:18.688Z,1478860278.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:19.053Z,1478860279.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:19.085Z,1478860279.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:19.453Z,1478860279.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:19.488Z,1478860279.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:19.864Z,1478860279.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:19.881Z,1478860279.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:20.287Z,1478860280.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:20.319Z,1478860280.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:20.653Z,1478860280.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:20.685Z,1478860280.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:21.053Z,1478860281.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:21.089Z,1478860281.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:21.453Z,1478860281.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:21.489Z,1478860281.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:21.853Z,1478860281.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:21.889Z,1478860281.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:22.253Z,1478860282.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:22.289Z,1478860282.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:22.667Z,1478860282.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:22.706Z,1478860282.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:23.053Z,1478860283.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:23.090Z,1478860283.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:23.457Z,1478860283.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:23.489Z,1478860283.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:23.857Z,1478860283.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:23.890Z,1478860283.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:24.253Z,1478860284.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:24.284Z,1478860284.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:24.655Z,1478860284.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:24.694Z,1478860284.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:25.061Z,1478860285.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:25.094Z,1478860285.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:25.457Z,1478860285.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:25.473Z,1478860285.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:25.853Z,1478860285.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:25.890Z,1478860285.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:26.268Z,1478860286.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:26.283Z,1478860286.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:26.664Z,1478860286.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:26.680Z,1478860286.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:27.053Z,1478860287.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:27.081Z,1478860287.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:27.457Z,1478860287.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:27.489Z,1478860287.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:27.853Z,1478860287.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:27.886Z,1478860287.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:28.253Z,1478860288.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:28.273Z,1478860288.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:28.686Z,1478860288.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:28.702Z,1478860288.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:29.053Z,1478860289.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:29.102Z,1478860289.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:29.461Z,1478860289.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:29.477Z,1478860289.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:29.853Z,1478860289.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:29.885Z,1478860289.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:30.264Z,1478860290.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:30.333Z,1478860290.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:30.653Z,1478860290.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:30.689Z,1478860290.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:31.057Z,1478860291.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:31.083Z,1478860291.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:31.453Z,1478860291.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:31.502Z,1478860291.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:31.853Z,1478860291.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:31.889Z,1478860291.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:32.261Z,1478860292.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:32.313Z,1478860292.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:32.657Z,1478860292.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:32.706Z,1478860292.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:33.053Z,1478860293.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:33.090Z,1478860293.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:33.457Z,1478860293.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:33.493Z,1478860293.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:33.853Z,1478860293.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:33.889Z,1478860293.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:34.267Z,1478860294.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:34.324Z,1478860294.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:34.656Z,1478860294.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:34.689Z,1478860294.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:35.060Z,1478860295.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:35.174Z,1478860295.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:35.453Z,1478860295.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:35.489Z,1478860295.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:35.854Z,1478860295.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:35.885Z,1478860295.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:36.254Z,1478860296.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:36.281Z,1478860296.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:36.655Z,1478860296.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:36.682Z,1478860296.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:37.066Z,1478860297.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:37.081Z,1478860297.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:37.460Z,1478860297.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:37.481Z,1478860297.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:37.862Z,1478860297.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:37.881Z,1478860297.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:38.260Z,1478860298.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:38.281Z,1478860298.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:38.661Z,1478860298.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:38.693Z,1478860298.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:39.053Z,1478860299.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:39.089Z,1478860299.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:39.453Z,1478860299.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:39.489Z,1478860299.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:39.853Z,1478860299.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:39.882Z,1478860299.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:40.253Z,1478860300.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:40.297Z,1478860300.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:40.658Z,1478860300.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:40.674Z,1478860300.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:41.057Z,1478860301.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:41.073Z,1478860301.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:41.459Z,1478860301.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:41.481Z,1478860301.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:41.864Z,1478860301.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:41.879Z,1478860301.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:42.268Z,1478860302.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:42.283Z,1478860302.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:42.664Z,1478860302.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:42.679Z,1478860302.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:43.053Z,1478860303.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:43.078Z,1478860303.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:43.453Z,1478860303.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:43.513Z,1478860303.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:43.857Z,1478860303.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:43.889Z,1478860303.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:44.261Z,1478860304.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:44.287Z,1478860304.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:44.653Z,1478860304.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:44.713Z,1478860304.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:45.053Z,1478860305.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:45.068Z,1478860305.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:45.456Z,1478860305.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:45.472Z,1478860305.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:45.856Z,1478860305.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:45.907Z,1478860305.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:46.265Z,1478860306.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:46.280Z,1478860306.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:46.659Z,1478860306.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:46.704Z,1478860306.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:47.059Z,1478860307.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:47.108Z,1478860307.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:47.460Z,1478860307.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:47.475Z,1478860307.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:47.859Z,1478860307.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:47.874Z,1478860307.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:48.266Z,1478860308.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:48.317Z,1478860308.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:48.653Z,1478860308.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:48.688Z,1478860308.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:49.053Z,1478860309.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:49.085Z,1478860309.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:49.453Z,1478860309.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:49.480Z,1478860309.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:49.853Z,1478860309.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:49.896Z,1478860309.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:50.258Z,1478860310.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:50.273Z,1478860310.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:50.666Z,1478860310.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:50.681Z,1478860310.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:51.063Z,1478860311.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:51.083Z,1478860311.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:51.461Z,1478860311.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:51.481Z,1478860311.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:51.853Z,1478860311.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:51.885Z,1478860311.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:52.253Z,1478860312.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:52.288Z,1478860312.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:52.657Z,1478860312.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:52.682Z,1478860312.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:53.053Z,1478860313.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:53.080Z,1478860313.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:53.453Z,1478860313.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:53.496Z,1478860313.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:53.853Z,1478860313.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:53.896Z,1478860313.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:54.253Z,1478860314.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:54.289Z,1478860314.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:54.658Z,1478860314.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:54.674Z,1478860314.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:55.056Z,1478860315.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:55.077Z,1478860315.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:55.460Z,1478860315.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:55.476Z,1478860315.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:55.860Z,1478860315.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:55.881Z,1478860315.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:56.265Z,1478860316.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:56.280Z,1478860316.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:56.660Z,1478860316.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:56.675Z,1478860316.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:57.060Z,1478860317.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:57.075Z,1478860317.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:57.464Z,1478860317.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:57.485Z,1478860317.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:57.857Z,1478860317.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:57.889Z,1478860317.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:58.261Z,1478860318.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:58.310Z,1478860318.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:58.653Z,1478860318.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:58.682Z,1478860318.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:59.068Z,1478860319.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:59.125Z,1478860319.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:31:59.464Z,1478860319.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:31:59.484Z,1478860319.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:03.058Z,1478860323.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:03.106Z,1478860323.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:03.208Z,1478860323.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:03.253Z,1478860323.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:03.585Z,1478860323.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:03.636Z,1478860323.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:03.987Z,1478860323.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:04.029Z,1478860324.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:04.384Z,1478860324.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:04.408Z,1478860324.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:04.787Z,1478860324.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:04.829Z,1478860324.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:05.181Z,1478860325.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:05.201Z,1478860325.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:05.581Z,1478860325.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:05.596Z,1478860325.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:05.984Z,1478860325.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:06.006Z,1478860326.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:06.389Z,1478860326.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:06.433Z,1478860326.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:06.781Z,1478860326.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:06.796Z,1478860326.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:07.189Z,1478860327.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:07.234Z,1478860327.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:07.587Z,1478860327.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:07.602Z,1478860327.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:07.987Z,1478860327.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:08.003Z,1478860328.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:08.388Z,1478860328.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:08.403Z,1478860328.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:08.792Z,1478860328.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:08.807Z,1478860328.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:09.188Z,1478860329.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:09.204Z,1478860329.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:09.584Z,1478860329.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:09.616Z,1478860329.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:09.988Z,1478860329.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:10.011Z,1478860330.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:10.381Z,1478860330.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:10.424Z,1478860330.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:10.781Z,1478860330.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:10.817Z,1478860330.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:11.184Z,1478860331.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:11.218Z,1478860331.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:11.581Z,1478860331.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:11.613Z,1478860331.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:11.981Z,1478860331.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:12.022Z,1478860332.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:12.393Z,1478860332.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:12.428Z,1478860332.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:12.785Z,1478860332.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:12.805Z,1478860332.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:13.189Z,1478860333.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:13.209Z,1478860333.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:13.589Z,1478860333.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:13.610Z,1478860333.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:13.985Z,1478860333.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:14.005Z,1478860334.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:14.388Z,1478860334.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:14.403Z,1478860334.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:14.783Z,1478860334.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:14.845Z,1478860334.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:15.181Z,1478860335.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:15.221Z,1478860335.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:15.581Z,1478860335.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:15.613Z,1478860335.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:15.985Z,1478860335.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:16.012Z,1478860336.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:16.381Z,1478860336.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:16.445Z,1478860336.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:16.781Z,1478860336.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:16.821Z,1478860336.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:17.185Z,1478860337.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:17.217Z,1478860337.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:17.607Z,1478860337.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:17.670Z,1478860337.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:17.986Z,1478860337.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:18.022Z,1478860338.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:18.389Z,1478860338.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:18.439Z,1478860338.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:18.789Z,1478860338.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:18.846Z,1478860338.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:19.188Z,1478860339.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:19.209Z,1478860339.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:19.588Z,1478860339.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:19.618Z,1478860339.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:19.981Z,1478860339.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:20.014Z,1478860340.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:20.381Z,1478860340.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:20.417Z,1478860340.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:20.789Z,1478860340.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:20.815Z,1478860340.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:21.190Z,1478860341.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:21.213Z,1478860341.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:21.605Z,1478860341.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:21.637Z,1478860341.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:21.985Z,1478860341.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:22.018Z,1478860342.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:22.381Z,1478860342.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:22.405Z,1478860342.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:22.789Z,1478860342.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:22.804Z,1478860342.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:23.191Z,1478860343.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:23.211Z,1478860343.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:23.589Z,1478860343.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:23.605Z,1478860343.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:23.981Z,1478860343.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:24.049Z,1478860344.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:24.385Z,1478860344.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:24.415Z,1478860344.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:24.781Z,1478860344.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:24.813Z,1478860344.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:25.181Z,1478860345.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:25.217Z,1478860345.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:25.581Z,1478860345.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:25.628Z,1478860345.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:25.981Z,1478860345.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:26.051Z,1478860346.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:26.381Z,1478860346.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:26.403Z,1478860346.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:26.787Z,1478860346.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:26.811Z,1478860346.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:27.193Z,1478860347.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:27.210Z,1478860347.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:27.591Z,1478860347.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:27.610Z,1478860347.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:27.986Z,1478860347.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:28.084Z,1478860348.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:28.382Z,1478860348.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:28.425Z,1478860348.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:28.782Z,1478860348.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:28.797Z,1478860348.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:29.190Z,1478860349.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:29.228Z,1478860349.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:29.586Z,1478860349.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:29.605Z,1478860349.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:29.987Z,1478860349.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:30.029Z,1478860350.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:30.381Z,1478860350.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:30.402Z,1478860350.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:30.788Z,1478860350.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:30.841Z,1478860350.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:31.192Z,1478860351.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:31.209Z,1478860351.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:31.581Z,1478860351.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:31.606Z,1478860351.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:31.981Z,1478860351.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:32.022Z,1478860352.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:32.381Z,1478860352.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:32.420Z,1478860352.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:32.781Z,1478860352.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:32.799Z,1478860352.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:33.187Z,1478860353.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:33.230Z,1478860353.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:33.587Z,1478860353.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:33.605Z,1478860353.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:33.985Z,1478860353.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:33.997Z,1478860353.997 [BPC1](ERROR): Failed to receive battery data
2016-11-11T10:32:33.997Z,1478860353.997 [BPC1] Communications Fault, FailCount= 1
2016-11-11T10:32:33.997Z,1478860353.997 [BPC1](ERROR): Communications Fault
2016-11-11T10:32:34.009Z,1478860354.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:34.078Z,1478860354.078 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T10:32:34.394Z,1478860354.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:34.442Z,1478860354.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:34.786Z,1478860354.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:34.813Z,1478860354.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:35.185Z,1478860355.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:35.208Z,1478860355.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:35.269Z,1478860355.269 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:32:35.269Z,1478860355.269 [BPC1] No Fault, FailCount= 1
2016-11-11T10:32:35.589Z,1478860355.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:35.679Z,1478860355.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:35.990Z,1478860355.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:36.075Z,1478860356.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:36.388Z,1478860356.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:36.421Z,1478860356.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:36.791Z,1478860356.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:36.814Z,1478860356.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:37.190Z,1478860357.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:37.206Z,1478860357.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:37.591Z,1478860357.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:37.607Z,1478860357.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:37.993Z,1478860357.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:38.063Z,1478860358.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:38.405Z,1478860358.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:38.429Z,1478860358.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:38.782Z,1478860358.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:38.810Z,1478860358.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:39.182Z,1478860359.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:39.218Z,1478860359.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:39.582Z,1478860359.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:39.614Z,1478860359.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:39.981Z,1478860359.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:40.057Z,1478860360.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:40.394Z,1478860360.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:40.418Z,1478860360.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:40.793Z,1478860360.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:40.824Z,1478860360.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:41.183Z,1478860361.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:41.225Z,1478860361.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:41.583Z,1478860361.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:41.604Z,1478860361.604 [PNI_TCM](ERROR): CRC does not match. Expected:0x754 got:0x6978
2016-11-11T10:32:41.634Z,1478860361.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:41.986Z,1478860361.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:42.075Z,1478860362.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:42.387Z,1478860362.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:42.430Z,1478860362.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:42.783Z,1478860362.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:42.830Z,1478860362.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:43.181Z,1478860363.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:43.233Z,1478860363.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:43.585Z,1478860363.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:43.629Z,1478860363.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:43.987Z,1478860363.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:44.021Z,1478860364.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:44.383Z,1478860364.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:44.421Z,1478860364.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:44.784Z,1478860364.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:44.828Z,1478860364.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:45.185Z,1478860365.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:45.226Z,1478860365.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:45.593Z,1478860365.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:45.638Z,1478860365.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:45.992Z,1478860365.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:46.058Z,1478860366.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:46.386Z,1478860366.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:46.418Z,1478860366.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:46.789Z,1478860366.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:46.835Z,1478860366.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:46.972Z,1478860366.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:47.191Z,1478860367.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:47.217Z,1478860367.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:47.581Z,1478860367.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:47.610Z,1478860367.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:47.769Z,1478860367.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:47.991Z,1478860367.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:48.007Z,1478860368.007 [PNI_TCM](ERROR): CRC does not match. Expected:0x38805 got:0x6978
2016-11-11T10:32:48.096Z,1478860368.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:48.386Z,1478860368.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:48.402Z,1478860368.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:48.808Z,1478860368.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:48.880Z,1478860368.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:49.208Z,1478860369.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:49.240Z,1478860369.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:49.587Z,1478860369.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:49.635Z,1478860369.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:50.033Z,1478860370.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:50.108Z,1478860370.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:50.389Z,1478860370.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:50.422Z,1478860370.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:50.789Z,1478860370.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:50.827Z,1478860370.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:51.198Z,1478860371.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:51.234Z,1478860371.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:51.626Z,1478860371.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:51.641Z,1478860371.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:52.001Z,1478860372.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:52.046Z,1478860372.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:52.387Z,1478860372.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:52.463Z,1478860372.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:52.785Z,1478860372.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:52.825Z,1478860372.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:53.183Z,1478860373.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:53.225Z,1478860373.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:53.581Z,1478860373.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:53.613Z,1478860373.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:54.005Z,1478860374.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:54.061Z,1478860374.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:54.392Z,1478860374.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:54.421Z,1478860374.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:54.781Z,1478860374.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:54.814Z,1478860374.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:55.188Z,1478860375.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:55.222Z,1478860375.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:55.586Z,1478860375.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:55.629Z,1478860375.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:56.007Z,1478860376.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:56.101Z,1478860376.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:56.390Z,1478860376.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:56.412Z,1478860376.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:56.786Z,1478860376.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:56.860Z,1478860376.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:57.188Z,1478860377.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:57.242Z,1478860377.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:57.583Z,1478860377.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:57.633Z,1478860377.633 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:57.633Z,1478860377.634 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95
2016-11-11T10:32:57.634Z,1478860377.634 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:32:57.647Z,1478860377.647 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:57.647Z,1478860377.647 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 95
2016-11-11T10:32:57.647Z,1478860377.647 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:32:57.652Z,1478860377.652 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:57.652Z,1478860377.652 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 95
2016-11-11T10:32:57.652Z,1478860377.652 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:32:57.688Z,1478860377.688 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:32:57.688Z,1478860377.688 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:32:57.689Z,1478860377.689 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:32:57.983Z,1478860377.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:58.113Z,1478860378.113 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:32:58.113Z,1478860378.113 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95
2016-11-11T10:32:58.115Z,1478860378.115 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:32:58.115Z,1478860378.115 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 95
2016-11-11T10:32:58.116Z,1478860378.116 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:32:58.116Z,1478860378.116 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 95
2016-11-11T10:32:58.383Z,1478860378.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:58.397Z,1478860378.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:32:58.398Z,1478860378.398 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:32:58.398Z,1478860378.398 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:32:58.432Z,1478860378.432 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:32:58.432Z,1478860378.432 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:32:58.433Z,1478860378.433 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:32:58.433Z,1478860378.433 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:32:58.433Z,1478860378.434 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:32:58.434Z,1478860378.434 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:32:58.794Z,1478860378.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:58.817Z,1478860378.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:59.195Z,1478860379.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:59.225Z,1478860379.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:32:59.583Z,1478860379.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:32:59.624Z,1478860379.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:06.272Z,1478860386.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:06.373Z,1478860386.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:06.466Z,1478860386.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:06.490Z,1478860386.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:06.843Z,1478860386.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:06.897Z,1478860386.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:07.247Z,1478860387.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:07.266Z,1478860387.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:07.648Z,1478860387.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:07.700Z,1478860387.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:08.050Z,1478860388.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:08.118Z,1478860388.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:08.449Z,1478860388.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:08.469Z,1478860388.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:08.838Z,1478860388.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:08.870Z,1478860388.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:09.241Z,1478860389.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:09.269Z,1478860389.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:09.641Z,1478860389.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:09.673Z,1478860389.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:10.041Z,1478860390.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:10.081Z,1478860390.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:10.445Z,1478860390.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:10.473Z,1478860390.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:10.841Z,1478860390.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:10.885Z,1478860390.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:11.241Z,1478860391.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:11.256Z,1478860391.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:11.641Z,1478860391.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:11.657Z,1478860391.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:12.048Z,1478860392.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:12.112Z,1478860392.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:12.449Z,1478860392.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:12.465Z,1478860392.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:12.848Z,1478860392.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:12.864Z,1478860392.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:13.248Z,1478860393.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:13.263Z,1478860393.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:13.645Z,1478860393.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:13.661Z,1478860393.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:14.047Z,1478860394.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:14.073Z,1478860394.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:14.468Z,1478860394.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:14.521Z,1478860394.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:14.841Z,1478860394.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:14.869Z,1478860394.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:15.241Z,1478860395.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:15.282Z,1478860395.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:15.641Z,1478860395.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:15.656Z,1478860395.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:16.045Z,1478860396.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:16.060Z,1478860396.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:16.454Z,1478860396.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:16.490Z,1478860396.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:16.845Z,1478860396.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:16.860Z,1478860396.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:17.242Z,1478860397.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:17.291Z,1478860397.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:17.645Z,1478860397.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:17.660Z,1478860397.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:18.049Z,1478860398.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:18.064Z,1478860398.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:18.441Z,1478860398.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:18.461Z,1478860398.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:18.845Z,1478860398.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:18.860Z,1478860398.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:19.245Z,1478860399.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:19.265Z,1478860399.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:19.645Z,1478860399.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:19.661Z,1478860399.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:20.040Z,1478860400.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:20.101Z,1478860400.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:20.445Z,1478860400.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:20.460Z,1478860400.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:20.852Z,1478860400.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:20.901Z,1478860400.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:21.245Z,1478860401.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:21.260Z,1478860401.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:21.645Z,1478860401.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:21.693Z,1478860401.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:22.045Z,1478860402.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:22.093Z,1478860402.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:22.445Z,1478860402.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:22.460Z,1478860402.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:22.845Z,1478860402.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:22.860Z,1478860402.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:23.245Z,1478860403.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:23.265Z,1478860403.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:23.641Z,1478860403.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:23.661Z,1478860403.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:24.045Z,1478860404.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:24.060Z,1478860404.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:24.441Z,1478860404.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:24.461Z,1478860404.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:24.849Z,1478860404.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:24.869Z,1478860404.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:25.241Z,1478860405.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:25.261Z,1478860405.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:25.638Z,1478860405.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:25.653Z,1478860405.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:26.048Z,1478860406.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:26.071Z,1478860406.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:26.445Z,1478860406.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:26.465Z,1478860406.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:26.865Z,1478860406.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:26.910Z,1478860406.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:27.238Z,1478860407.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:27.253Z,1478860407.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:27.645Z,1478860407.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:27.660Z,1478860407.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:28.049Z,1478860408.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:28.069Z,1478860408.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:28.448Z,1478860408.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:28.463Z,1478860408.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:28.841Z,1478860408.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:28.861Z,1478860408.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:29.249Z,1478860409.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:29.265Z,1478860409.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:29.642Z,1478860409.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:29.658Z,1478860409.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:30.045Z,1478860410.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:30.060Z,1478860410.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:30.447Z,1478860410.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:30.463Z,1478860410.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:30.845Z,1478860410.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:30.860Z,1478860410.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:31.245Z,1478860411.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:31.265Z,1478860411.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:31.645Z,1478860411.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:31.665Z,1478860411.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:32.045Z,1478860412.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:32.065Z,1478860412.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:32.441Z,1478860412.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:32.461Z,1478860412.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:32.845Z,1478860412.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:32.865Z,1478860412.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:33.245Z,1478860413.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:33.260Z,1478860413.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:33.645Z,1478860413.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:33.685Z,1478860413.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:34.041Z,1478860414.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:34.089Z,1478860414.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:34.445Z,1478860414.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:34.465Z,1478860414.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:34.845Z,1478860414.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:34.893Z,1478860414.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:35.245Z,1478860415.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:35.260Z,1478860415.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:35.645Z,1478860415.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:35.686Z,1478860415.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:36.045Z,1478860416.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:36.093Z,1478860416.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:36.445Z,1478860416.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:36.460Z,1478860416.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:36.845Z,1478860416.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:36.860Z,1478860416.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:37.245Z,1478860417.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:37.265Z,1478860417.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:37.641Z,1478860417.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:37.661Z,1478860417.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:38.045Z,1478860418.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:38.060Z,1478860418.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:38.445Z,1478860418.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:38.465Z,1478860418.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:38.838Z,1478860418.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:38.853Z,1478860418.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:39.242Z,1478860419.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:39.258Z,1478860419.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:39.645Z,1478860419.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:39.665Z,1478860419.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:40.050Z,1478860420.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:40.111Z,1478860420.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:40.441Z,1478860420.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:40.469Z,1478860420.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:40.849Z,1478860420.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:40.869Z,1478860420.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:41.241Z,1478860421.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:41.261Z,1478860421.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:41.641Z,1478860421.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:41.667Z,1478860421.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:42.043Z,1478860422.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:42.061Z,1478860422.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:42.443Z,1478860422.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:42.458Z,1478860422.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:42.842Z,1478860422.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:42.877Z,1478860422.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:43.242Z,1478860423.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:43.269Z,1478860423.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:43.642Z,1478860423.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:43.669Z,1478860423.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:44.041Z,1478860424.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:44.069Z,1478860424.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:44.443Z,1478860424.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:44.458Z,1478860424.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:44.842Z,1478860424.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:44.869Z,1478860424.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:45.241Z,1478860425.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:45.269Z,1478860425.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:45.642Z,1478860425.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:45.673Z,1478860425.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:46.054Z,1478860426.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:46.077Z,1478860426.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:46.441Z,1478860426.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:46.477Z,1478860426.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:46.842Z,1478860426.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:46.865Z,1478860426.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:47.241Z,1478860427.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:47.276Z,1478860427.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:47.641Z,1478860427.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:47.672Z,1478860427.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:48.041Z,1478860428.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:48.109Z,1478860428.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:48.441Z,1478860428.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:48.456Z,1478860428.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:48.841Z,1478860428.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:48.890Z,1478860428.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:49.248Z,1478860429.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:49.269Z,1478860429.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:49.648Z,1478860429.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:49.698Z,1478860429.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:50.050Z,1478860430.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:50.109Z,1478860430.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:50.449Z,1478860430.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:50.464Z,1478860430.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:50.849Z,1478860430.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:50.864Z,1478860430.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:51.249Z,1478860431.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:51.273Z,1478860431.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:51.648Z,1478860431.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:51.669Z,1478860431.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:52.041Z,1478860432.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:52.080Z,1478860432.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:52.445Z,1478860432.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:52.479Z,1478860432.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:52.841Z,1478860432.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:52.875Z,1478860432.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:53.241Z,1478860433.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:53.281Z,1478860433.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:53.641Z,1478860433.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:53.661Z,1478860433.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:54.051Z,1478860434.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:54.099Z,1478860434.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:54.447Z,1478860434.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:54.462Z,1478860434.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:54.848Z,1478860434.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:54.863Z,1478860434.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:55.248Z,1478860435.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:55.263Z,1478860435.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:55.647Z,1478860435.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:55.662Z,1478860435.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:56.048Z,1478860436.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:56.069Z,1478860436.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:56.455Z,1478860436.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:56.470Z,1478860436.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:56.850Z,1478860436.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:56.869Z,1478860436.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:57.241Z,1478860437.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:57.275Z,1478860437.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:57.645Z,1478860437.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:57.677Z,1478860437.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:58.041Z,1478860438.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:58.073Z,1478860438.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:58.441Z,1478860438.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:58.473Z,1478860438.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:58.841Z,1478860438.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:58.873Z,1478860438.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:59.241Z,1478860439.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:59.269Z,1478860439.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:33:59.642Z,1478860439.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:33:59.677Z,1478860439.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:03.175Z,1478860443.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:03.269Z,1478860443.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:03.365Z,1478860443.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:03.401Z,1478860443.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:03.748Z,1478860443.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:03.769Z,1478860443.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:04.157Z,1478860444.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:04.205Z,1478860444.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:04.548Z,1478860444.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:04.564Z,1478860444.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:04.948Z,1478860444.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:04.994Z,1478860444.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:05.351Z,1478860445.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:05.402Z,1478860445.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:05.751Z,1478860445.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:05.766Z,1478860445.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:06.152Z,1478860446.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:06.173Z,1478860446.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:06.552Z,1478860446.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:06.573Z,1478860446.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:06.952Z,1478860446.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:06.996Z,1478860446.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:07.345Z,1478860447.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:07.379Z,1478860447.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:07.745Z,1478860447.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:07.778Z,1478860447.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:08.160Z,1478860448.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:08.181Z,1478860448.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:08.545Z,1478860448.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:08.579Z,1478860448.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:08.945Z,1478860448.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:08.979Z,1478860448.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:09.345Z,1478860449.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:09.381Z,1478860449.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:09.745Z,1478860449.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:09.776Z,1478860449.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:10.149Z,1478860450.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:10.174Z,1478860450.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:10.545Z,1478860450.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:10.580Z,1478860450.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:10.945Z,1478860450.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:10.980Z,1478860450.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:11.345Z,1478860451.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:11.381Z,1478860451.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:11.745Z,1478860451.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:11.781Z,1478860451.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:12.145Z,1478860452.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:12.181Z,1478860452.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:12.545Z,1478860452.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:12.581Z,1478860452.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:12.956Z,1478860452.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:12.982Z,1478860452.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:13.353Z,1478860453.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:13.389Z,1478860453.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:13.749Z,1478860453.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:13.785Z,1478860453.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:14.152Z,1478860454.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:14.168Z,1478860454.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:14.548Z,1478860454.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:14.570Z,1478860454.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:14.948Z,1478860454.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:14.973Z,1478860454.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:15.352Z,1478860455.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:15.368Z,1478860455.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:15.745Z,1478860455.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:15.770Z,1478860455.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:16.157Z,1478860456.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:16.172Z,1478860456.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:16.545Z,1478860456.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:16.581Z,1478860456.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:16.944Z,1478860456.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:16.977Z,1478860456.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:17.345Z,1478860457.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:17.429Z,1478860457.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:17.745Z,1478860457.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:17.761Z,1478860457.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:18.150Z,1478860458.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:18.169Z,1478860458.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:18.545Z,1478860458.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:18.597Z,1478860458.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:18.946Z,1478860458.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:18.965Z,1478860458.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:19.350Z,1478860459.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:19.392Z,1478860459.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:19.750Z,1478860459.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:19.895Z,1478860459.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:20.151Z,1478860460.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:20.166Z,1478860460.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:20.552Z,1478860460.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:20.573Z,1478860460.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:20.952Z,1478860460.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:20.973Z,1478860460.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:21.352Z,1478860461.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:21.368Z,1478860461.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:21.745Z,1478860461.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:21.785Z,1478860461.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:22.153Z,1478860462.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:22.178Z,1478860462.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:22.545Z,1478860462.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:22.585Z,1478860462.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:22.945Z,1478860462.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:22.965Z,1478860462.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:23.345Z,1478860463.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:23.361Z,1478860463.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:23.745Z,1478860463.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:23.760Z,1478860463.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:24.153Z,1478860464.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:24.168Z,1478860464.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:24.557Z,1478860464.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:24.572Z,1478860464.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:24.948Z,1478860464.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:24.998Z,1478860464.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:25.345Z,1478860465.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:25.379Z,1478860465.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:25.749Z,1478860465.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:25.781Z,1478860465.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:26.145Z,1478860466.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:26.177Z,1478860466.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:26.545Z,1478860466.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:26.577Z,1478860466.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:26.945Z,1478860466.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:26.970Z,1478860466.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:27.345Z,1478860467.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:27.377Z,1478860467.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:27.745Z,1478860467.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:27.777Z,1478860467.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:28.153Z,1478860468.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:28.185Z,1478860468.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:28.545Z,1478860468.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:28.560Z,1478860468.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:28.945Z,1478860468.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:28.965Z,1478860468.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:29.349Z,1478860469.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:29.369Z,1478860469.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:29.752Z,1478860469.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:29.768Z,1478860469.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:30.145Z,1478860470.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:30.177Z,1478860470.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:30.549Z,1478860470.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:30.575Z,1478860470.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:30.945Z,1478860470.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:30.978Z,1478860470.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:31.345Z,1478860471.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:31.380Z,1478860471.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:31.745Z,1478860471.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:31.802Z,1478860471.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:32.145Z,1478860472.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:32.165Z,1478860472.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:32.552Z,1478860472.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:32.605Z,1478860472.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:32.957Z,1478860472.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:32.977Z,1478860472.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:33.352Z,1478860473.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:33.404Z,1478860473.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:33.752Z,1478860473.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:33.773Z,1478860473.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:34.160Z,1478860474.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:34.216Z,1478860474.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:34.545Z,1478860474.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:34.597Z,1478860474.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:34.945Z,1478860474.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:34.970Z,1478860474.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:35.349Z,1478860475.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:35.375Z,1478860475.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:35.745Z,1478860475.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:35.777Z,1478860475.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:36.153Z,1478860476.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:36.180Z,1478860476.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:36.545Z,1478860476.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:36.577Z,1478860476.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:36.946Z,1478860476.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:36.983Z,1478860476.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:37.345Z,1478860477.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:37.391Z,1478860477.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:37.746Z,1478860477.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:37.761Z,1478860477.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:38.146Z,1478860478.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:38.165Z,1478860478.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:38.546Z,1478860478.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:38.565Z,1478860478.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:38.952Z,1478860478.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:38.968Z,1478860478.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:39.352Z,1478860479.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:39.367Z,1478860479.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:39.755Z,1478860479.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:39.771Z,1478860479.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:40.152Z,1478860480.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:40.168Z,1478860480.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:40.552Z,1478860480.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:40.574Z,1478860480.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:40.945Z,1478860480.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:40.981Z,1478860480.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:41.345Z,1478860481.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:41.378Z,1478860481.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:41.749Z,1478860481.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:41.781Z,1478860481.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:42.156Z,1478860482.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:42.172Z,1478860482.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:42.552Z,1478860482.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:42.567Z,1478860482.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:42.948Z,1478860482.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:42.976Z,1478860482.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:43.348Z,1478860483.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:43.371Z,1478860483.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:43.756Z,1478860483.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:43.771Z,1478860483.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:44.146Z,1478860484.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:44.169Z,1478860484.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:44.555Z,1478860484.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:44.570Z,1478860484.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:44.952Z,1478860484.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:44.967Z,1478860484.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:45.352Z,1478860485.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:45.377Z,1478860485.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:45.745Z,1478860485.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:45.770Z,1478860485.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:46.145Z,1478860486.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:46.207Z,1478860486.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:46.545Z,1478860486.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:46.601Z,1478860486.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:46.945Z,1478860486.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:46.989Z,1478860486.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:47.345Z,1478860487.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:47.365Z,1478860487.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:47.748Z,1478860487.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:47.837Z,1478860487.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:48.153Z,1478860488.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:48.168Z,1478860488.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:48.552Z,1478860488.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:48.602Z,1478860488.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:48.954Z,1478860488.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:49.015Z,1478860489.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:49.353Z,1478860489.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:49.373Z,1478860489.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:49.752Z,1478860489.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:49.767Z,1478860489.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:50.161Z,1478860490.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:50.180Z,1478860490.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:50.545Z,1478860490.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:50.577Z,1478860490.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:50.945Z,1478860490.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:50.973Z,1478860490.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:51.345Z,1478860491.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:51.387Z,1478860491.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:51.745Z,1478860491.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:51.785Z,1478860491.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:52.149Z,1478860492.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:52.189Z,1478860492.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:52.552Z,1478860492.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:52.567Z,1478860492.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:52.948Z,1478860492.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:52.980Z,1478860492.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:53.352Z,1478860493.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:53.371Z,1478860493.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:53.748Z,1478860493.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:53.776Z,1478860493.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:54.145Z,1478860494.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:54.170Z,1478860494.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:54.548Z,1478860494.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:54.563Z,1478860494.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:54.954Z,1478860494.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:54.973Z,1478860494.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:55.351Z,1478860495.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:55.373Z,1478860495.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:55.752Z,1478860495.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:55.767Z,1478860495.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:56.145Z,1478860496.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:56.184Z,1478860496.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:56.549Z,1478860496.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:56.568Z,1478860496.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:56.979Z,1478860496.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:57.021Z,1478860497.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:57.361Z,1478860497.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:57.405Z,1478860497.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:57.745Z,1478860497.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:57.761Z,1478860497.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:58.152Z,1478860498.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:58.170Z,1478860498.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:58.551Z,1478860498.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:58.603Z,1478860498.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:58.952Z,1478860498.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:58.968Z,1478860498.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:58.980Z,1478860498.980 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T10:34:58.981Z,1478860498.981 [Default:CheckIn:C.Wait] Stopped
2016-11-11T10:34:58.981Z,1478860498.981 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T10:34:58.981Z,1478860498.981 [Default:CheckIn:D] Running Loop=1
2016-11-11T10:34:59.348Z,1478860499.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:59.380Z,1478860499.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:59.389Z,1478860499.389 [Default:CheckIn:D] Stopped
2016-11-11T10:34:59.389Z,1478860499.389 [Default:CheckIn:E] Running Loop=1
2016-11-11T10:34:59.744Z,1478860499.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:34:59.825Z,1478860499.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:34:59.860Z,1478860499.860 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 344.967969 min 
2016-11-11T10:34:59.860Z,1478860499.860 [Default:CheckIn:E] Stopped
2016-11-11T10:34:59.860Z,1478860499.860 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T10:34:59.860Z,1478860499.860 [Default:CheckIn] Stopped
2016-11-11T10:34:59.860Z,1478860499.861 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T10:34:59.861Z,1478860499.861 [Default:CheckIn](INFO): Running loop #34
2016-11-11T10:34:59.861Z,1478860499.861 [Default:CheckIn] Running Loop=34
2016-11-11T10:34:59.861Z,1478860499.861 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T10:34:59.861Z,1478860499.861 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T10:35:03.314Z,1478860503.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:03.389Z,1478860503.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:03.484Z,1478860503.484 [NAL9602](INFO): Powering up
2016-11-11T10:35:03.502Z,1478860503.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:03.526Z,1478860503.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:03.871Z,1478860503.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:03.968Z,1478860503.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:04.257Z,1478860504.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:04.291Z,1478860504.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:04.657Z,1478860504.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:04.713Z,1478860504.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:05.057Z,1478860505.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:05.093Z,1478860505.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:05.457Z,1478860505.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:05.498Z,1478860505.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:05.857Z,1478860505.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:05.905Z,1478860505.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:06.294Z,1478860506.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:06.388Z,1478860506.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:06.660Z,1478860506.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:06.689Z,1478860506.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:07.057Z,1478860507.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:07.089Z,1478860507.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:07.457Z,1478860507.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:07.497Z,1478860507.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:07.857Z,1478860507.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:07.893Z,1478860507.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:08.283Z,1478860508.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:08.312Z,1478860508.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:08.657Z,1478860508.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:08.677Z,1478860508.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:09.057Z,1478860509.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:09.077Z,1478860509.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:09.460Z,1478860509.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:09.481Z,1478860509.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:09.869Z,1478860509.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:09.884Z,1478860509.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:10.261Z,1478860510.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:10.281Z,1478860510.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:10.665Z,1478860510.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:10.680Z,1478860510.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:11.065Z,1478860511.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:11.080Z,1478860511.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:11.465Z,1478860511.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:11.480Z,1478860511.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:11.871Z,1478860511.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:11.887Z,1478860511.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:12.269Z,1478860512.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:12.284Z,1478860512.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:12.657Z,1478860512.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:12.691Z,1478860512.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:13.057Z,1478860513.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:13.089Z,1478860513.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:13.457Z,1478860513.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:13.493Z,1478860513.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:13.858Z,1478860513.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:13.894Z,1478860513.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:14.280Z,1478860514.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:14.308Z,1478860514.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:14.641Z,1478860514.641 [NAL9602](INFO): NAL9602 initialized
2016-11-11T10:35:14.658Z,1478860514.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:14.673Z,1478860514.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:15.061Z,1478860515.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:15.105Z,1478860515.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:15.445Z,1478860515.445 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T10:35:15.445Z,1478860515.445 [NAL9602] Data Fault, FailCount= 2
2016-11-11T10:35:15.445Z,1478860515.445 [NAL9602](ERROR): Data Fault
2016-11-11T10:35:15.463Z,1478860515.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:15.478Z,1478860515.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:15.536Z,1478860515.536 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T10:35:15.863Z,1478860515.863 [NAL9602](INFO): Powering down
2016-11-11T10:35:15.881Z,1478860515.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:15.922Z,1478860515.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:16.261Z,1478860516.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:16.289Z,1478860516.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:16.668Z,1478860516.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:16.683Z,1478860516.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:16.723Z,1478860516.723 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T10:35:16.724Z,1478860516.724 [NAL9602] No Fault, FailCount= 2
2016-11-11T10:35:17.065Z,1478860517.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:17.093Z,1478860517.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:17.460Z,1478860517.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:17.520Z,1478860517.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:17.907Z,1478860517.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:18.016Z,1478860518.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:18.260Z,1478860518.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:18.287Z,1478860518.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:18.657Z,1478860518.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:18.693Z,1478860518.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:19.061Z,1478860519.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:19.132Z,1478860519.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:19.460Z,1478860519.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:19.487Z,1478860519.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:19.857Z,1478860519.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:19.902Z,1478860519.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:20.266Z,1478860520.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:20.346Z,1478860520.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:20.657Z,1478860520.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:20.692Z,1478860520.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:21.041Z,1478860521.041 [NAL9602](INFO): Powering up NAL9602
2016-11-11T10:35:21.058Z,1478860521.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:21.097Z,1478860521.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:21.457Z,1478860521.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:21.497Z,1478860521.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:21.862Z,1478860521.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:21.877Z,1478860521.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:22.277Z,1478860522.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:22.329Z,1478860522.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:22.661Z,1478860522.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:22.681Z,1478860522.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:23.063Z,1478860523.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:23.078Z,1478860523.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:23.465Z,1478860523.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:23.480Z,1478860523.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:23.872Z,1478860523.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:23.893Z,1478860523.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:24.268Z,1478860524.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:24.284Z,1478860524.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:24.657Z,1478860524.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:24.692Z,1478860524.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:25.072Z,1478860525.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:25.088Z,1478860525.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:25.457Z,1478860525.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:25.491Z,1478860525.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:25.857Z,1478860525.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:25.884Z,1478860525.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:26.258Z,1478860526.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:26.290Z,1478860526.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:26.657Z,1478860526.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:26.693Z,1478860526.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:27.058Z,1478860527.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:27.090Z,1478860527.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:27.458Z,1478860527.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:27.493Z,1478860527.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:27.858Z,1478860527.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:27.890Z,1478860527.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:28.262Z,1478860528.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:28.288Z,1478860528.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:28.657Z,1478860528.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:28.689Z,1478860528.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:29.057Z,1478860529.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:29.094Z,1478860529.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:29.457Z,1478860529.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:29.493Z,1478860529.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:29.879Z,1478860529.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:29.906Z,1478860529.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:30.265Z,1478860530.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:30.302Z,1478860530.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:30.664Z,1478860530.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:30.680Z,1478860530.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:31.070Z,1478860531.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:31.086Z,1478860531.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:31.476Z,1478860531.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:31.492Z,1478860531.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:31.857Z,1478860531.857 [NAL9602](INFO): NAL9602 initialized
2016-11-11T10:35:31.878Z,1478860531.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:31.897Z,1478860531.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:32.270Z,1478860532.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:32.286Z,1478860532.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:32.675Z,1478860532.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:32.752Z,1478860532.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:33.079Z,1478860533.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:33.094Z,1478860533.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:33.479Z,1478860533.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:33.533Z,1478860533.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:33.873Z,1478860533.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:33.893Z,1478860533.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:34.260Z,1478860534.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:34.310Z,1478860534.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:34.662Z,1478860534.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:34.710Z,1478860534.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:35.077Z,1478860535.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:35.097Z,1478860535.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:35.479Z,1478860535.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:35.494Z,1478860535.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:35.880Z,1478860535.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:35.895Z,1478860535.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:36.264Z,1478860536.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:36.302Z,1478860536.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:36.661Z,1478860536.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:36.689Z,1478860536.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:37.065Z,1478860537.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:37.081Z,1478860537.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:37.457Z,1478860537.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:37.493Z,1478860537.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:37.857Z,1478860537.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:37.890Z,1478860537.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:38.266Z,1478860538.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:38.299Z,1478860538.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:38.657Z,1478860538.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:38.697Z,1478860538.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:39.057Z,1478860539.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:39.077Z,1478860539.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:39.464Z,1478860539.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:39.480Z,1478860539.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:39.888Z,1478860539.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:39.914Z,1478860539.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:40.268Z,1478860540.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:40.295Z,1478860540.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:40.666Z,1478860540.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:40.681Z,1478860540.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:41.069Z,1478860541.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:41.084Z,1478860541.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:41.464Z,1478860541.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:41.485Z,1478860541.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:41.874Z,1478860541.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:41.890Z,1478860541.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:42.257Z,1478860542.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:42.289Z,1478860542.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:42.657Z,1478860542.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:42.691Z,1478860542.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:43.062Z,1478860543.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:43.089Z,1478860543.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:43.465Z,1478860543.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:43.491Z,1478860543.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:43.886Z,1478860543.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:43.905Z,1478860543.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:44.280Z,1478860544.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:44.296Z,1478860544.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:44.657Z,1478860544.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:44.693Z,1478860544.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:45.057Z,1478860545.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:45.093Z,1478860545.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:45.458Z,1478860545.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:45.489Z,1478860545.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:45.874Z,1478860545.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:45.906Z,1478860545.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:46.265Z,1478860546.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:46.280Z,1478860546.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:46.665Z,1478860546.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:46.714Z,1478860546.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:47.072Z,1478860547.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:47.125Z,1478860547.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:47.468Z,1478860547.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:47.489Z,1478860547.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:47.865Z,1478860547.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:47.927Z,1478860547.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:48.273Z,1478860548.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:48.289Z,1478860548.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:48.665Z,1478860548.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:48.722Z,1478860548.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:49.058Z,1478860549.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:49.089Z,1478860549.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:49.457Z,1478860549.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:49.510Z,1478860549.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:49.857Z,1478860549.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:49.892Z,1478860549.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:50.264Z,1478860550.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:50.296Z,1478860550.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:50.661Z,1478860550.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:50.681Z,1478860550.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:51.068Z,1478860551.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:51.083Z,1478860551.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:51.470Z,1478860551.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:51.485Z,1478860551.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:51.869Z,1478860551.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:51.889Z,1478860551.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:52.269Z,1478860552.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:52.289Z,1478860552.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:52.679Z,1478860552.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:52.695Z,1478860552.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:53.078Z,1478860553.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:53.093Z,1478860553.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:53.464Z,1478860553.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:53.479Z,1478860553.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:53.877Z,1478860553.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:53.897Z,1478860553.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:54.269Z,1478860554.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:54.289Z,1478860554.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:54.310Z,1478860554.310 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T10:35:54.657Z,1478860554.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:54.689Z,1478860554.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:55.058Z,1478860555.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:55.089Z,1478860555.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:55.457Z,1478860555.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:55.489Z,1478860555.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:55.865Z,1478860555.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:55.890Z,1478860555.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:56.257Z,1478860556.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:56.277Z,1478860556.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:56.665Z,1478860556.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:56.705Z,1478860556.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:57.075Z,1478860557.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:57.110Z,1478860557.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:57.476Z,1478860557.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:57.508Z,1478860557.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:57.869Z,1478860557.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:57.905Z,1478860557.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:58.261Z,1478860558.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:58.284Z,1478860558.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:58.668Z,1478860558.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:58.684Z,1478860558.684 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:58.684Z,1478860558.684 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96
2016-11-11T10:35:58.684Z,1478860558.684 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:35:58.691Z,1478860558.691 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:58.691Z,1478860558.691 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 96
2016-11-11T10:35:58.691Z,1478860558.691 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:35:58.693Z,1478860558.693 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:35:58.693Z,1478860558.694 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 96
2016-11-11T10:35:58.694Z,1478860558.694 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:35:58.724Z,1478860558.724 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:35:58.724Z,1478860558.724 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:35:58.725Z,1478860558.724 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:35:59.069Z,1478860559.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:59.123Z,1478860559.123 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:35:59.123Z,1478860559.124 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96
2016-11-11T10:35:59.124Z,1478860559.124 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:35:59.124Z,1478860559.124 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 96
2016-11-11T10:35:59.125Z,1478860559.125 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:35:59.125Z,1478860559.125 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 96
2016-11-11T10:35:59.457Z,1478860559.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:59.481Z,1478860559.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:35:59.481Z,1478860559.481 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:35:59.482Z,1478860559.482 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:35:59.486Z,1478860559.486 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:35:59.487Z,1478860559.487 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:35:59.487Z,1478860559.487 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:35:59.488Z,1478860559.488 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:35:59.488Z,1478860559.488 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:35:59.488Z,1478860559.489 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:35:59.872Z,1478860559.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:35:59.908Z,1478860559.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:00.296Z,1478860560.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:01.092Z,1478860561.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:03.234Z,1478860563.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:03.326Z,1478860563.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:03.434Z,1478860563.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:03.462Z,1478860563.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:03.820Z,1478860563.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:03.853Z,1478860563.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:04.250Z,1478860564.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:04.270Z,1478860564.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:04.609Z,1478860564.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:04.661Z,1478860564.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:05.008Z,1478860565.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:05.023Z,1478860565.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:05.405Z,1478860565.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:05.454Z,1478860565.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:05.802Z,1478860565.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:05.850Z,1478860565.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:06.206Z,1478860566.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:06.241Z,1478860566.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:06.601Z,1478860566.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:06.641Z,1478860566.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:07.001Z,1478860567.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:07.017Z,1478860567.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:07.401Z,1478860567.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:07.421Z,1478860567.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:07.821Z,1478860567.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:07.845Z,1478860567.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:08.216Z,1478860568.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:08.231Z,1478860568.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:08.616Z,1478860568.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:08.637Z,1478860568.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:09.016Z,1478860569.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:09.032Z,1478860569.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:09.414Z,1478860569.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:09.430Z,1478860569.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:09.824Z,1478860569.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:09.840Z,1478860569.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:10.205Z,1478860570.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:10.228Z,1478860570.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:10.609Z,1478860570.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:10.650Z,1478860570.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:11.001Z,1478860571.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:11.028Z,1478860571.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:11.401Z,1478860571.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:11.433Z,1478860571.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:11.816Z,1478860571.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:11.832Z,1478860571.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:12.201Z,1478860572.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:12.236Z,1478860572.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:12.601Z,1478860572.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:12.633Z,1478860572.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:13.027Z,1478860573.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:13.043Z,1478860573.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:13.419Z,1478860573.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:13.441Z,1478860573.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:13.828Z,1478860573.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:13.878Z,1478860573.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:14.216Z,1478860574.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:14.242Z,1478860574.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:14.276Z,1478860574.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:14.601Z,1478860574.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:14.621Z,1478860574.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:15.005Z,1478860575.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:15.025Z,1478860575.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:15.072Z,1478860575.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:15.409Z,1478860575.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:15.424Z,1478860575.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:15.806Z,1478860575.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:15.833Z,1478860575.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:16.233Z,1478860576.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:16.265Z,1478860576.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:16.605Z,1478860576.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:16.629Z,1478860576.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:17.014Z,1478860577.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:17.023Z,1478860577.023 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T10:36:17.023Z,1478860577.023 [BPC1] Data Fault, FailCount= 1
2016-11-11T10:36:17.023Z,1478860577.023 [BPC1](ERROR): Data Fault
2016-11-11T10:36:17.031Z,1478860577.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:17.051Z,1478860577.051 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T10:36:17.402Z,1478860577.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:17.438Z,1478860577.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:17.801Z,1478860577.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:17.833Z,1478860577.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:18.232Z,1478860578.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:18.248Z,1478860578.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:18.284Z,1478860578.284 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:36:18.284Z,1478860578.284 [BPC1] No Fault, FailCount= 1
2016-11-11T10:36:18.612Z,1478860578.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:18.697Z,1478860578.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:19.024Z,1478860579.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:19.075Z,1478860579.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:19.426Z,1478860579.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:19.442Z,1478860579.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:19.809Z,1478860579.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:19.835Z,1478860579.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:20.201Z,1478860580.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:20.237Z,1478860580.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:20.601Z,1478860580.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:20.638Z,1478860580.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:21.001Z,1478860581.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:21.050Z,1478860581.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:21.401Z,1478860581.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:21.417Z,1478860581.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:21.801Z,1478860581.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:21.821Z,1478860581.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:22.205Z,1478860582.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:22.225Z,1478860582.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:22.604Z,1478860582.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:22.620Z,1478860582.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:23.008Z,1478860583.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:23.023Z,1478860583.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:23.424Z,1478860583.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:23.440Z,1478860583.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:23.820Z,1478860583.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:23.836Z,1478860583.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:24.223Z,1478860584.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:24.245Z,1478860584.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:24.619Z,1478860584.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:24.634Z,1478860584.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:25.001Z,1478860585.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:25.034Z,1478860585.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:25.401Z,1478860585.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:25.436Z,1478860585.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:25.817Z,1478860585.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:25.832Z,1478860585.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:26.201Z,1478860586.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:26.234Z,1478860586.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:26.605Z,1478860586.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:26.632Z,1478860586.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:27.017Z,1478860587.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:27.038Z,1478860587.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:27.401Z,1478860587.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:27.438Z,1478860587.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:27.827Z,1478860587.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:27.858Z,1478860587.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:28.210Z,1478860588.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:28.236Z,1478860588.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:28.624Z,1478860588.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:28.641Z,1478860588.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:29.032Z,1478860589.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:29.053Z,1478860589.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:29.405Z,1478860589.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:29.442Z,1478860589.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:29.805Z,1478860589.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:29.838Z,1478860589.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:30.209Z,1478860590.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:30.237Z,1478860590.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:30.605Z,1478860590.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:30.625Z,1478860590.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:31.009Z,1478860591.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:31.092Z,1478860591.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:31.416Z,1478860591.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:31.437Z,1478860591.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:31.819Z,1478860591.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:31.835Z,1478860591.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:32.216Z,1478860592.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:32.269Z,1478860592.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:32.608Z,1478860592.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:32.629Z,1478860592.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:33.005Z,1478860593.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:33.065Z,1478860593.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:33.411Z,1478860593.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:33.466Z,1478860593.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:33.810Z,1478860593.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:33.825Z,1478860593.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:34.213Z,1478860594.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:34.228Z,1478860594.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:34.609Z,1478860594.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:34.631Z,1478860594.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:35.015Z,1478860595.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:35.031Z,1478860595.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:35.409Z,1478860595.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:35.432Z,1478860595.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:35.801Z,1478860595.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:35.827Z,1478860595.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:36.201Z,1478860596.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:36.245Z,1478860596.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:36.601Z,1478860596.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:36.628Z,1478860596.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:37.002Z,1478860597.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:37.034Z,1478860597.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:37.402Z,1478860597.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:37.436Z,1478860597.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:37.802Z,1478860597.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:37.834Z,1478860597.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:38.206Z,1478860598.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:38.245Z,1478860598.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:38.602Z,1478860598.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:38.634Z,1478860598.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:39.001Z,1478860599.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:39.042Z,1478860599.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:39.401Z,1478860599.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:39.442Z,1478860599.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:39.810Z,1478860599.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:39.843Z,1478860599.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:40.216Z,1478860600.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:40.248Z,1478860600.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:40.621Z,1478860600.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:40.652Z,1478860600.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:41.009Z,1478860601.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:41.030Z,1478860601.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:41.409Z,1478860601.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:41.430Z,1478860601.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:41.819Z,1478860601.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:41.842Z,1478860601.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:42.209Z,1478860602.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:42.237Z,1478860602.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:42.604Z,1478860602.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:42.632Z,1478860602.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:43.016Z,1478860603.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:43.038Z,1478860603.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:43.409Z,1478860603.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:43.425Z,1478860603.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:43.817Z,1478860603.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:43.842Z,1478860603.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:44.226Z,1478860604.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:44.249Z,1478860604.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:44.627Z,1478860604.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:44.643Z,1478860604.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:45.001Z,1478860605.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:45.034Z,1478860605.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:45.401Z,1478860605.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:45.461Z,1478860605.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:45.801Z,1478860605.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:45.838Z,1478860605.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:46.214Z,1478860606.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:46.237Z,1478860606.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:46.605Z,1478860606.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:46.637Z,1478860606.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:47.002Z,1478860607.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:47.045Z,1478860607.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:47.401Z,1478860607.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:47.417Z,1478860607.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:47.801Z,1478860607.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:47.817Z,1478860607.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:48.206Z,1478860608.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:48.221Z,1478860608.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:48.616Z,1478860608.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:48.624Z,1478860608.624 [BPC1](ERROR): Failed to receive battery data
2016-11-11T10:36:48.624Z,1478860608.624 [BPC1] Communications Fault, FailCount= 1
2016-11-11T10:36:48.624Z,1478860608.625 [BPC1](ERROR): Communications Fault
2016-11-11T10:36:48.645Z,1478860608.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:48.689Z,1478860608.690 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T10:36:49.012Z,1478860609.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:49.027Z,1478860609.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:49.408Z,1478860609.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:49.423Z,1478860609.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:49.813Z,1478860609.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:49.833Z,1478860609.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:49.878Z,1478860609.878 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:36:49.878Z,1478860609.878 [BPC1] No Fault, FailCount= 1
2016-11-11T10:36:50.213Z,1478860610.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:50.293Z,1478860610.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:50.601Z,1478860610.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:50.628Z,1478860610.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:51.001Z,1478860611.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:51.059Z,1478860611.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:51.401Z,1478860611.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:51.433Z,1478860611.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:51.818Z,1478860611.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:51.834Z,1478860611.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:52.201Z,1478860612.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:52.236Z,1478860612.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:52.601Z,1478860612.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:52.633Z,1478860612.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:53.001Z,1478860613.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:53.036Z,1478860613.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:53.401Z,1478860613.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:53.433Z,1478860613.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:53.817Z,1478860613.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:53.832Z,1478860613.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:54.201Z,1478860614.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:54.233Z,1478860614.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:54.601Z,1478860614.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:54.633Z,1478860614.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:55.001Z,1478860615.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:55.033Z,1478860615.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:55.401Z,1478860615.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:55.427Z,1478860615.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:55.818Z,1478860615.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:55.833Z,1478860615.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:56.201Z,1478860616.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:56.233Z,1478860616.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:56.601Z,1478860616.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:56.638Z,1478860616.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:57.001Z,1478860617.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:57.038Z,1478860617.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:57.426Z,1478860617.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:57.452Z,1478860617.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:57.828Z,1478860617.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:57.845Z,1478860617.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:58.201Z,1478860618.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:58.237Z,1478860618.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:58.601Z,1478860618.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:58.637Z,1478860618.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:59.010Z,1478860619.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:59.036Z,1478860619.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:59.401Z,1478860619.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:59.437Z,1478860619.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:36:59.805Z,1478860619.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:36:59.838Z,1478860619.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:00.231Z,1478860620.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:00.247Z,1478860620.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:03.564Z,1478860623.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:03.701Z,1478860623.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:03.797Z,1478860623.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:03.825Z,1478860623.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:04.177Z,1478860624.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:04.197Z,1478860624.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:04.585Z,1478860624.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:04.636Z,1478860624.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:04.985Z,1478860624.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:05.000Z,1478860625.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:05.384Z,1478860625.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:05.432Z,1478860625.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:05.789Z,1478860625.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:05.841Z,1478860625.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:06.180Z,1478860626.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:06.210Z,1478860626.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:06.595Z,1478860626.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:06.617Z,1478860626.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:06.992Z,1478860626.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:07.020Z,1478860627.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:07.377Z,1478860627.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:07.409Z,1478860627.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:07.789Z,1478860627.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:07.812Z,1478860627.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:08.181Z,1478860628.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:08.207Z,1478860628.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:08.577Z,1478860628.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:08.609Z,1478860628.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:08.977Z,1478860628.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:09.012Z,1478860629.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:09.381Z,1478860629.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:09.417Z,1478860629.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:09.779Z,1478860629.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:09.817Z,1478860629.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:10.177Z,1478860630.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:10.210Z,1478860630.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:10.577Z,1478860630.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:10.609Z,1478860630.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:10.000Z,1478860631.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:11.016Z,1478860631.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:11.400Z,1478860631.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:11.421Z,1478860631.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:11.777Z,1478860631.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:11.814Z,1478860631.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:12.177Z,1478860632.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:12.214Z,1478860632.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:12.578Z,1478860632.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:12.615Z,1478860632.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:12.978Z,1478860632.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:13.006Z,1478860633.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:13.378Z,1478860633.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:13.394Z,1478860633.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:13.778Z,1478860633.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:13.827Z,1478860633.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:14.189Z,1478860634.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:14.224Z,1478860634.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:14.581Z,1478860634.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:14.601Z,1478860634.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:14.981Z,1478860634.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:15.001Z,1478860635.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:15.384Z,1478860635.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:15.401Z,1478860635.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:15.789Z,1478860635.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:15.809Z,1478860635.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:16.189Z,1478860636.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:16.257Z,1478860636.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:16.577Z,1478860636.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:16.610Z,1478860636.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:16.977Z,1478860636.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:17.003Z,1478860637.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:17.377Z,1478860637.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:17.437Z,1478860637.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:17.777Z,1478860637.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:17.797Z,1478860637.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:18.181Z,1478860638.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:18.226Z,1478860638.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:18.577Z,1478860638.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:18.597Z,1478860638.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:18.981Z,1478860638.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:19.032Z,1478860639.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:19.384Z,1478860639.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:19.438Z,1478860639.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:19.800Z,1478860639.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:19.827Z,1478860639.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:20.192Z,1478860640.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:20.223Z,1478860640.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:20.583Z,1478860640.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:20.599Z,1478860640.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:20.984Z,1478860640.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:21.006Z,1478860641.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:21.385Z,1478860641.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:21.400Z,1478860641.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:21.792Z,1478860641.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:21.807Z,1478860641.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:22.185Z,1478860642.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:22.205Z,1478860642.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:22.577Z,1478860642.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:22.609Z,1478860642.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:22.977Z,1478860642.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:23.009Z,1478860643.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:23.377Z,1478860643.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:23.412Z,1478860643.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:23.794Z,1478860643.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:23.821Z,1478860643.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:24.195Z,1478860644.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:24.211Z,1478860644.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:24.577Z,1478860644.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:24.605Z,1478860644.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:24.977Z,1478860644.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:25.009Z,1478860645.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:25.377Z,1478860645.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:25.409Z,1478860645.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:25.777Z,1478860645.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:25.809Z,1478860645.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:26.177Z,1478860646.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:26.209Z,1478860646.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:26.577Z,1478860646.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:26.609Z,1478860646.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:26.977Z,1478860646.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:27.010Z,1478860647.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:27.381Z,1478860647.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:27.413Z,1478860647.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:27.777Z,1478860647.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:27.809Z,1478860647.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:28.211Z,1478860648.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:28.236Z,1478860648.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:28.577Z,1478860648.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:28.597Z,1478860648.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:28.985Z,1478860648.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:29.021Z,1478860649.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:29.380Z,1478860649.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:29.404Z,1478860649.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:29.784Z,1478860649.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:29.842Z,1478860649.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:30.180Z,1478860650.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:30.212Z,1478860650.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:30.585Z,1478860650.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:30.605Z,1478860650.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:30.980Z,1478860650.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:31.013Z,1478860651.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:31.377Z,1478860651.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:31.442Z,1478860651.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:31.786Z,1478860651.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:31.813Z,1478860651.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:32.177Z,1478860652.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:32.209Z,1478860652.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:32.581Z,1478860652.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:32.637Z,1478860652.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:32.978Z,1478860652.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:33.014Z,1478860653.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:33.377Z,1478860653.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:33.429Z,1478860653.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:33.777Z,1478860653.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:33.829Z,1478860653.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:34.177Z,1478860654.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:34.217Z,1478860654.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:34.577Z,1478860654.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:34.617Z,1478860654.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:34.978Z,1478860654.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:35.021Z,1478860655.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:35.377Z,1478860655.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:35.392Z,1478860655.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:35.789Z,1478860655.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:35.825Z,1478860655.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:36.184Z,1478860656.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:36.200Z,1478860656.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:36.585Z,1478860656.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:36.600Z,1478860656.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:36.980Z,1478860656.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:37.008Z,1478860657.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:37.380Z,1478860657.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:37.412Z,1478860657.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:37.794Z,1478860657.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:37.809Z,1478860657.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:38.177Z,1478860658.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:38.209Z,1478860658.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:38.585Z,1478860658.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:38.607Z,1478860658.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:38.977Z,1478860658.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:39.012Z,1478860659.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:39.377Z,1478860659.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:39.409Z,1478860659.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:39.777Z,1478860659.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:39.809Z,1478860659.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:40.177Z,1478860660.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:40.213Z,1478860660.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:40.578Z,1478860660.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:40.610Z,1478860660.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:40.979Z,1478860660.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:40.995Z,1478860660.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:41.385Z,1478860661.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:41.425Z,1478860661.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:41.793Z,1478860661.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:41.818Z,1478860661.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:42.187Z,1478860662.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:42.222Z,1478860662.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:42.580Z,1478860662.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:42.624Z,1478860662.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:42.984Z,1478860662.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:43.037Z,1478860663.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:43.387Z,1478860663.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:43.412Z,1478860663.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:43.787Z,1478860663.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:43.835Z,1478860663.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:44.179Z,1478860664.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:44.218Z,1478860664.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:44.585Z,1478860664.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:44.678Z,1478860664.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:44.984Z,1478860664.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:45.017Z,1478860665.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:45.378Z,1478860665.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:45.407Z,1478860665.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:45.779Z,1478860665.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:45.820Z,1478860665.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:46.184Z,1478860666.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:46.272Z,1478860666.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:46.562Z,1478860666.562 [NAL9602](INFO): SBD MO Status=2, MOMSN=342, MT Status=2, MTMSN=0
2016-11-11T10:37:46.562Z,1478860666.562 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T10:37:46.588Z,1478860666.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:46.630Z,1478860666.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:46.990Z,1478860666.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:47.072Z,1478860667.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:47.379Z,1478860667.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:47.438Z,1478860667.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:47.800Z,1478860667.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:47.869Z,1478860667.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:48.183Z,1478860668.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:48.238Z,1478860668.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:48.584Z,1478860668.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:48.621Z,1478860668.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:48.978Z,1478860668.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:49.022Z,1478860669.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:49.381Z,1478860669.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:49.417Z,1478860669.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:49.789Z,1478860669.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:49.809Z,1478860669.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:50.190Z,1478860670.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:50.222Z,1478860670.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:50.577Z,1478860670.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:50.604Z,1478860670.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:51.009Z,1478860671.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:51.062Z,1478860671.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:51.391Z,1478860671.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:51.431Z,1478860671.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:51.784Z,1478860671.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:51.836Z,1478860671.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:52.190Z,1478860672.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:52.209Z,1478860672.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:52.588Z,1478860672.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:52.632Z,1478860672.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:52.977Z,1478860672.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:53.005Z,1478860673.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:53.395Z,1478860673.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:53.417Z,1478860673.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:53.781Z,1478860673.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:53.834Z,1478860673.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:54.177Z,1478860674.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:54.213Z,1478860674.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:54.586Z,1478860674.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:54.637Z,1478860674.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:54.983Z,1478860674.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:55.009Z,1478860675.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:55.392Z,1478860675.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:55.449Z,1478860675.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:55.789Z,1478860675.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:55.813Z,1478860675.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:56.180Z,1478860676.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:56.223Z,1478860676.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:56.580Z,1478860676.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:56.627Z,1478860676.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:56.978Z,1478860676.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:57.006Z,1478860677.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:57.380Z,1478860677.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:57.416Z,1478860677.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:57.779Z,1478860677.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:57.823Z,1478860677.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:58.187Z,1478860678.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:58.227Z,1478860678.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:58.587Z,1478860678.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:58.667Z,1478860678.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:58.979Z,1478860678.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:59.031Z,1478860679.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:59.379Z,1478860679.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:59.427Z,1478860679.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:37:59.787Z,1478860679.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:37:59.860Z,1478860679.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:00.179Z,1478860680.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:00.228Z,1478860680.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:00.618Z,1478860680.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:00.696Z,1478860680.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:07.783Z,1478860687.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:07.828Z,1478860687.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:07.981Z,1478860687.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:08.078Z,1478860688.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:08.339Z,1478860688.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:08.389Z,1478860688.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:08.740Z,1478860688.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:08.761Z,1478860688.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:09.141Z,1478860689.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:09.188Z,1478860689.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:09.535Z,1478860689.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:09.586Z,1478860689.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:09.938Z,1478860689.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:10.006Z,1478860690.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:10.329Z,1478860690.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:10.349Z,1478860690.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:10.730Z,1478860690.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:10.749Z,1478860690.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:11.133Z,1478860691.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:11.153Z,1478860691.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:11.544Z,1478860691.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:11.565Z,1478860691.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:11.934Z,1478860691.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:11.949Z,1478860691.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:12.330Z,1478860692.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:12.346Z,1478860692.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:12.733Z,1478860692.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:12.749Z,1478860692.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:13.134Z,1478860693.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:13.177Z,1478860693.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:13.542Z,1478860693.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:13.564Z,1478860693.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:13.933Z,1478860693.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:13.953Z,1478860693.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:14.329Z,1478860694.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:14.349Z,1478860694.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:14.733Z,1478860694.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:14.753Z,1478860694.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:15.129Z,1478860695.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:15.145Z,1478860695.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:15.543Z,1478860695.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:15.564Z,1478860695.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:15.914Z,1478860695.914 [NAL9602](INFO): SBD MO Status=2, MOMSN=342, MT Status=2, MTMSN=0
2016-11-11T10:38:15.914Z,1478860695.914 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T10:38:15.932Z,1478860695.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:15.948Z,1478860695.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:16.340Z,1478860696.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:16.355Z,1478860696.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:16.730Z,1478860696.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:16.746Z,1478860696.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:17.133Z,1478860697.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:17.153Z,1478860697.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:17.544Z,1478860697.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:17.562Z,1478860697.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:17.934Z,1478860697.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:17.949Z,1478860697.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:18.342Z,1478860698.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:18.380Z,1478860698.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:18.737Z,1478860698.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:18.777Z,1478860698.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:19.133Z,1478860699.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:19.148Z,1478860699.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:19.530Z,1478860699.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:19.546Z,1478860699.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:19.929Z,1478860699.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:19.949Z,1478860699.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:20.348Z,1478860700.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:20.369Z,1478860700.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:20.744Z,1478860700.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:20.785Z,1478860700.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:20.796Z,1478860700.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:21.133Z,1478860701.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:21.149Z,1478860701.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:21.533Z,1478860701.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:21.574Z,1478860701.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:21.592Z,1478860701.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:21.983Z,1478860701.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:22.006Z,1478860702.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:22.333Z,1478860702.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:22.378Z,1478860702.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:22.733Z,1478860702.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:22.749Z,1478860702.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:23.129Z,1478860703.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:23.177Z,1478860703.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:23.533Z,1478860703.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:23.553Z,1478860703.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:23.954Z,1478860703.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:23.974Z,1478860703.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:24.348Z,1478860704.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:24.364Z,1478860704.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:24.740Z,1478860704.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:24.756Z,1478860704.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:25.133Z,1478860705.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:25.148Z,1478860705.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:25.542Z,1478860705.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:25.650Z,1478860705.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:25.937Z,1478860705.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:25.957Z,1478860705.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:26.333Z,1478860706.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:26.349Z,1478860706.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:26.730Z,1478860706.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:26.749Z,1478860706.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:27.129Z,1478860707.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:27.157Z,1478860707.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:27.530Z,1478860707.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:27.579Z,1478860707.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:27.930Z,1478860707.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:27.957Z,1478860707.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:28.330Z,1478860708.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:28.357Z,1478860708.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:28.730Z,1478860708.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:28.757Z,1478860708.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:29.130Z,1478860709.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:29.150Z,1478860709.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:29.531Z,1478860709.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:29.568Z,1478860709.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:29.930Z,1478860709.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:29.957Z,1478860709.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:30.329Z,1478860710.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:30.350Z,1478860710.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:30.739Z,1478860710.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:30.754Z,1478860710.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:31.137Z,1478860711.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:31.152Z,1478860711.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:31.543Z,1478860711.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:31.558Z,1478860711.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:31.941Z,1478860711.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:31.957Z,1478860711.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:32.342Z,1478860712.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:32.357Z,1478860712.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:32.751Z,1478860712.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:32.770Z,1478860712.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:33.144Z,1478860713.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:33.173Z,1478860713.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:33.540Z,1478860713.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:33.609Z,1478860713.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:33.929Z,1478860713.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:33.981Z,1478860713.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:34.342Z,1478860714.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:34.385Z,1478860714.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:34.737Z,1478860714.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:34.757Z,1478860714.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:35.137Z,1478860715.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:35.197Z,1478860715.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:35.541Z,1478860715.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:35.556Z,1478860715.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:35.964Z,1478860715.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:35.986Z,1478860715.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:36.329Z,1478860716.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:36.382Z,1478860716.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:36.729Z,1478860716.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:36.769Z,1478860716.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:37.144Z,1478860717.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:37.198Z,1478860717.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:37.534Z,1478860717.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:37.550Z,1478860717.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:37.982Z,1478860717.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:38.049Z,1478860718.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:38.333Z,1478860718.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:38.353Z,1478860718.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:38.733Z,1478860718.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:38.753Z,1478860718.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:39.141Z,1478860719.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:39.158Z,1478860719.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:39.538Z,1478860719.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:39.557Z,1478860719.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:39.932Z,1478860719.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:39.964Z,1478860719.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:40.341Z,1478860720.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:40.356Z,1478860720.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:40.729Z,1478860720.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:40.764Z,1478860720.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:41.141Z,1478860721.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:41.156Z,1478860721.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:41.545Z,1478860721.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:41.565Z,1478860721.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:41.940Z,1478860721.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:41.962Z,1478860721.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:42.329Z,1478860722.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:42.361Z,1478860722.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:42.729Z,1478860722.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:42.761Z,1478860722.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:43.129Z,1478860723.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:43.166Z,1478860723.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:43.539Z,1478860723.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:43.566Z,1478860723.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:43.930Z,1478860723.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:43.969Z,1478860723.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:44.332Z,1478860724.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:44.376Z,1478860724.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:44.735Z,1478860724.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:44.751Z,1478860724.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:45.129Z,1478860725.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:45.146Z,1478860725.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:45.543Z,1478860725.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:45.558Z,1478860725.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:45.937Z,1478860725.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:45.961Z,1478860725.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:46.335Z,1478860726.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:46.352Z,1478860726.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:46.738Z,1478860726.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:46.754Z,1478860726.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:47.141Z,1478860727.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:47.157Z,1478860727.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:47.576Z,1478860727.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:47.613Z,1478860727.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:47.929Z,1478860727.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:47.969Z,1478860727.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:48.329Z,1478860728.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:48.349Z,1478860728.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:48.733Z,1478860728.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:48.781Z,1478860728.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:49.134Z,1478860729.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:49.149Z,1478860729.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:49.537Z,1478860729.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:49.553Z,1478860729.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:49.947Z,1478860729.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:50.021Z,1478860730.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:50.339Z,1478860730.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:50.355Z,1478860730.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:50.732Z,1478860730.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:50.793Z,1478860730.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:51.139Z,1478860731.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:51.154Z,1478860731.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:51.529Z,1478860731.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:51.578Z,1478860731.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:51.972Z,1478860731.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:52.015Z,1478860732.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:52.330Z,1478860732.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:52.365Z,1478860732.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:52.734Z,1478860732.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:52.760Z,1478860732.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:53.130Z,1478860733.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:53.165Z,1478860733.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:53.529Z,1478860733.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:53.557Z,1478860733.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:53.938Z,1478860733.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:53.973Z,1478860733.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:54.334Z,1478860734.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:54.350Z,1478860734.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:54.729Z,1478860734.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:54.745Z,1478860734.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:55.141Z,1478860735.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:55.183Z,1478860735.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:55.530Z,1478860735.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:55.557Z,1478860735.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:55.935Z,1478860735.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:55.951Z,1478860735.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:56.337Z,1478860736.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:56.357Z,1478860736.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:56.734Z,1478860736.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:56.749Z,1478860736.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:57.136Z,1478860737.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:57.152Z,1478860737.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:57.543Z,1478860737.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:57.559Z,1478860737.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:57.932Z,1478860737.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:57.964Z,1478860737.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:58.314Z,1478860738.314 [NAL9602](INFO): SBD MO Status=0, MOMSN=342, MT Status=0, MTMSN=0
2016-11-11T10:38:58.314Z,1478860738.314 [NAL9602](INFO): No messages in MT queue
2016-11-11T10:38:58.339Z,1478860738.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:58.367Z,1478860738.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:58.730Z,1478860738.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:58.771Z,1478860738.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:59.144Z,1478860739.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:59.172Z,1478860739.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:59.558Z,1478860739.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:38:59.577Z,1478860739.577 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:59.577Z,1478860739.577 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97
2016-11-11T10:38:59.577Z,1478860739.578 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:38:59.584Z,1478860739.584 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:59.584Z,1478860739.584 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 97
2016-11-11T10:38:59.584Z,1478860739.584 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:38:59.586Z,1478860739.586 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:38:59.587Z,1478860739.587 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 97
2016-11-11T10:38:59.587Z,1478860739.587 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:38:59.633Z,1478860739.634 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:38:59.634Z,1478860739.634 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:38:59.634Z,1478860739.634 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:38:59.956Z,1478860739.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:00.007Z,1478860740.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:39:00.007Z,1478860740.007 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97
2016-11-11T10:39:00.008Z,1478860740.008 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:39:00.008Z,1478860740.008 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 97
2016-11-11T10:39:00.009Z,1478860740.009 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:39:00.009Z,1478860740.009 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 97
2016-11-11T10:39:00.330Z,1478860740.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:00.364Z,1478860740.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:39:00.365Z,1478860740.365 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:39:00.365Z,1478860740.365 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:39:00.370Z,1478860740.370 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:39:00.370Z,1478860740.370 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:39:00.371Z,1478860740.371 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:39:00.371Z,1478860740.371 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:39:00.372Z,1478860740.372 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:39:00.372Z,1478860740.372 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:39:00.729Z,1478860740.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:00.769Z,1478860740.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:04.222Z,1478860744.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:04.320Z,1478860744.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:04.405Z,1478860744.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:04.433Z,1478860744.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:04.812Z,1478860744.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:04.841Z,1478860744.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:05.201Z,1478860745.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:05.236Z,1478860745.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:05.595Z,1478860745.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:05.649Z,1478860745.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:05.993Z,1478860745.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:06.014Z,1478860746.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:06.412Z,1478860746.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:06.457Z,1478860746.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:06.812Z,1478860746.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:06.857Z,1478860746.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:07.212Z,1478860747.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:07.248Z,1478860747.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:07.600Z,1478860747.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:07.621Z,1478860747.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:08.005Z,1478860748.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:08.025Z,1478860748.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:08.405Z,1478860748.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:08.421Z,1478860748.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:08.801Z,1478860748.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:08.821Z,1478860748.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:09.214Z,1478860749.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:09.229Z,1478860749.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:09.617Z,1478860749.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:09.633Z,1478860749.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:10.020Z,1478860750.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:10.041Z,1478860750.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:10.393Z,1478860750.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:10.425Z,1478860750.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:10.797Z,1478860750.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:10.823Z,1478860750.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:11.193Z,1478860751.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:11.220Z,1478860751.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:11.603Z,1478860751.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:11.628Z,1478860751.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:11.993Z,1478860751.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:12.025Z,1478860752.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:12.408Z,1478860752.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:12.462Z,1478860752.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:12.808Z,1478860752.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:12.830Z,1478860752.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:13.220Z,1478860753.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:13.245Z,1478860753.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:13.605Z,1478860753.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:13.640Z,1478860753.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:13.997Z,1478860753.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:14.012Z,1478860754.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:14.401Z,1478860754.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:14.421Z,1478860754.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:14.800Z,1478860754.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:14.821Z,1478860754.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:15.205Z,1478860755.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:15.225Z,1478860755.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:15.616Z,1478860755.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:15.632Z,1478860755.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:16.011Z,1478860756.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:16.026Z,1478860756.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:16.396Z,1478860756.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:16.428Z,1478860756.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:16.804Z,1478860756.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:16.820Z,1478860756.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:17.193Z,1478860757.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:17.229Z,1478860757.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:17.605Z,1478860757.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:17.625Z,1478860757.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:18.009Z,1478860758.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:18.024Z,1478860758.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:18.416Z,1478860758.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:18.431Z,1478860758.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:18.812Z,1478860758.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:18.869Z,1478860758.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:19.215Z,1478860759.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:19.231Z,1478860759.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:19.593Z,1478860759.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:19.629Z,1478860759.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:19.993Z,1478860759.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:20.045Z,1478860760.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:20.394Z,1478860760.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:20.421Z,1478860760.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:20.793Z,1478860760.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:20.849Z,1478860760.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:21.204Z,1478860761.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:21.231Z,1478860761.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:21.623Z,1478860761.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:21.679Z,1478860761.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:22.020Z,1478860762.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:22.036Z,1478860762.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:22.394Z,1478860762.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:22.429Z,1478860762.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:22.797Z,1478860762.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:22.817Z,1478860762.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:23.198Z,1478860763.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:23.225Z,1478860763.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:23.608Z,1478860763.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:23.625Z,1478860763.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:24.004Z,1478860764.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:24.020Z,1478860764.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:24.415Z,1478860764.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:24.431Z,1478860764.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:24.812Z,1478860764.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:24.840Z,1478860764.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:25.215Z,1478860765.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:25.231Z,1478860765.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:25.593Z,1478860765.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:25.637Z,1478860765.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:25.993Z,1478860765.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:26.030Z,1478860766.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:26.398Z,1478860766.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:26.413Z,1478860766.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:26.798Z,1478860766.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:26.813Z,1478860766.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:27.211Z,1478860767.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:27.235Z,1478860767.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:27.618Z,1478860767.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:27.637Z,1478860767.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:28.015Z,1478860768.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:28.042Z,1478860768.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:28.393Z,1478860768.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:28.429Z,1478860768.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:28.794Z,1478860768.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:28.830Z,1478860768.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:29.194Z,1478860769.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:29.229Z,1478860769.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:29.604Z,1478860769.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:29.633Z,1478860769.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:30.002Z,1478860770.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:30.034Z,1478860770.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:30.408Z,1478860770.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:30.451Z,1478860770.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:30.809Z,1478860770.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:30.849Z,1478860770.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:31.204Z,1478860771.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:31.220Z,1478860771.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:31.596Z,1478860771.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:31.629Z,1478860771.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:32.009Z,1478860772.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:32.024Z,1478860772.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:32.402Z,1478860772.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:32.418Z,1478860772.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:32.793Z,1478860772.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:32.829Z,1478860772.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:33.214Z,1478860773.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:33.293Z,1478860773.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:33.623Z,1478860773.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:33.640Z,1478860773.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:34.004Z,1478860774.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:34.076Z,1478860774.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:34.393Z,1478860774.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:34.429Z,1478860774.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:34.801Z,1478860774.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:34.850Z,1478860774.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:35.193Z,1478860775.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:35.237Z,1478860775.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:35.595Z,1478860775.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:35.646Z,1478860775.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:36.004Z,1478860776.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:36.030Z,1478860776.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:36.404Z,1478860776.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:36.437Z,1478860776.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:36.808Z,1478860776.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:36.841Z,1478860776.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:37.204Z,1478860777.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:37.234Z,1478860777.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:37.602Z,1478860777.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:37.633Z,1478860777.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:37.993Z,1478860777.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:38.013Z,1478860778.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:38.402Z,1478860778.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:38.417Z,1478860778.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:38.801Z,1478860778.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:38.816Z,1478860778.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:39.204Z,1478860779.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:39.220Z,1478860779.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:39.620Z,1478860779.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:39.655Z,1478860779.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:40.010Z,1478860780.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:40.029Z,1478860780.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:40.397Z,1478860780.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:40.420Z,1478860780.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:40.801Z,1478860780.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:40.821Z,1478860780.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:41.202Z,1478860781.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:41.221Z,1478860781.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:41.603Z,1478860781.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:41.618Z,1478860781.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:41.994Z,1478860781.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:42.042Z,1478860782.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:42.416Z,1478860782.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:42.431Z,1478860782.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:42.818Z,1478860782.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:42.833Z,1478860782.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:43.219Z,1478860783.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:43.234Z,1478860783.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:43.593Z,1478860783.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:43.630Z,1478860783.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:43.995Z,1478860783.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:44.023Z,1478860784.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:44.393Z,1478860784.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:44.437Z,1478860784.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:44.808Z,1478860784.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:44.834Z,1478860784.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:45.208Z,1478860785.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:45.242Z,1478860785.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:45.608Z,1478860785.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:45.642Z,1478860785.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:45.993Z,1478860785.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:46.036Z,1478860786.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:46.393Z,1478860786.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:46.433Z,1478860786.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:46.793Z,1478860786.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:46.813Z,1478860786.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:47.203Z,1478860787.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:47.218Z,1478860787.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:47.594Z,1478860787.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:47.645Z,1478860787.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:48.015Z,1478860788.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:48.031Z,1478860788.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:48.410Z,1478860788.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:48.426Z,1478860788.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:48.806Z,1478860788.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:48.822Z,1478860788.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:49.193Z,1478860789.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:49.227Z,1478860789.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:49.593Z,1478860789.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:49.625Z,1478860789.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:49.995Z,1478860789.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:50.022Z,1478860790.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:50.393Z,1478860790.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:50.425Z,1478860790.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:50.820Z,1478860790.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:50.828Z,1478860790.828 [BPC1](ERROR): Failed to receive battery data
2016-11-11T10:39:50.828Z,1478860790.828 [BPC1] Communications Fault, FailCount= 1
2016-11-11T10:39:50.828Z,1478860790.828 [BPC1](ERROR): Communications Fault
2016-11-11T10:39:50.837Z,1478860790.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:50.896Z,1478860790.896 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T10:39:51.213Z,1478860791.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:51.233Z,1478860791.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:51.616Z,1478860791.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:51.637Z,1478860791.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:52.002Z,1478860792.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:52.028Z,1478860792.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:52.047Z,1478860792.047 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:39:52.047Z,1478860792.047 [BPC1] No Fault, FailCount= 1
2016-11-11T10:39:52.393Z,1478860792.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:52.477Z,1478860792.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:52.793Z,1478860792.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:52.826Z,1478860792.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:53.195Z,1478860793.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:53.242Z,1478860793.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:53.593Z,1478860793.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:53.619Z,1478860793.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:54.010Z,1478860794.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:54.026Z,1478860794.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:54.419Z,1478860794.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:54.441Z,1478860794.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:54.811Z,1478860794.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:54.827Z,1478860794.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:55.193Z,1478860795.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:55.228Z,1478860795.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:55.609Z,1478860795.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:55.629Z,1478860795.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:56.002Z,1478860796.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:56.018Z,1478860796.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:56.400Z,1478860796.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:56.421Z,1478860796.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:56.812Z,1478860796.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:56.836Z,1478860796.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:57.215Z,1478860797.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:57.230Z,1478860797.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:57.611Z,1478860797.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:57.627Z,1478860797.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:57.998Z,1478860797.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:58.026Z,1478860798.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:58.394Z,1478860798.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:58.447Z,1478860798.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:58.793Z,1478860798.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:58.829Z,1478860798.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:59.195Z,1478860799.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:59.226Z,1478860799.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:39:59.598Z,1478860799.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:39:59.633Z,1478860799.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:00.004Z,1478860800.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:00.031Z,1478860800.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:00.041Z,1478860800.040 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T10:34:59.9Z
2016-11-11T10:40:00.041Z,1478860800.041 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T10:40:00.041Z,1478860800.041 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T10:40:00.430Z,1478860800.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:00.446Z,1478860800.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:01.265Z,1478860801.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:01.296Z,1478860801.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:04.457Z,1478860804.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:04.535Z,1478860804.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:04.591Z,1478860804.591 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0136.lzma
2016-11-11T10:40:04.645Z,1478860804.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:04.668Z,1478860804.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:05.005Z,1478860805.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:05.025Z,1478860805.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:05.689Z,1478860805.689 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0136.lzma.bak
2016-11-11T10:40:05.690Z,1478860805.690 [DataOverHttps](INFO): SBD MOMSN=4555326
2016-11-11T10:40:05.744Z,1478860805.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:05.785Z,1478860805.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:06.823Z,1478860806.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:06.838Z,1478860806.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:06.942Z,1478860806.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:06.989Z,1478860806.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:10.426Z,1478860810.427 [NAL9602](INFO): Powering down
2016-11-11T10:40:10.446Z,1478860810.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:10.504Z,1478860810.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:10.601Z,1478860810.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:10.633Z,1478860810.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:10.990Z,1478860810.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:11.005Z,1478860811.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:11.434Z,1478860811.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:11.482Z,1478860811.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:11.792Z,1478860811.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:11.833Z,1478860811.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:12.189Z,1478860812.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:12.205Z,1478860812.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:15.598Z,1478860815.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:15.613Z,1478860815.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:15.691Z,1478860815.691 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0137.lzma
2016-11-11T10:40:15.738Z,1478860815.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:15.803Z,1478860815.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:16.101Z,1478860816.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:16.141Z,1478860816.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:16.928Z,1478860816.928 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0137.lzma.bak
2016-11-11T10:40:16.928Z,1478860816.928 [DataOverHttps](INFO): SBD MOMSN=4555328
2016-11-11T10:40:16.953Z,1478860816.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:17.001Z,1478860817.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:18.045Z,1478860818.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:18.060Z,1478860818.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:18.074Z,1478860818.074 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T10:40:18.074Z,1478860818.074 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T10:40:18.075Z,1478860818.075 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T10:40:18.165Z,1478860818.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:18.191Z,1478860818.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:21.677Z,1478860821.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:21.756Z,1478860821.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:21.858Z,1478860821.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:21.893Z,1478860821.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:22.217Z,1478860822.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:22.237Z,1478860822.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:22.617Z,1478860822.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:22.650Z,1478860822.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:23.016Z,1478860823.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:23.032Z,1478860823.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:23.425Z,1478860823.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:23.477Z,1478860823.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:23.816Z,1478860823.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:23.835Z,1478860823.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:24.217Z,1478860824.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:24.274Z,1478860824.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:24.609Z,1478860824.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:24.645Z,1478860824.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:25.017Z,1478860825.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:25.074Z,1478860825.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:25.423Z,1478860825.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:25.472Z,1478860825.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:25.813Z,1478860825.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:25.846Z,1478860825.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:26.209Z,1478860826.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:26.245Z,1478860826.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:26.609Z,1478860826.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:26.641Z,1478860826.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:27.013Z,1478860827.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:27.049Z,1478860827.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:27.409Z,1478860827.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:27.454Z,1478860827.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:27.819Z,1478860827.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:27.873Z,1478860827.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:28.209Z,1478860828.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:28.265Z,1478860828.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:28.609Z,1478860828.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:28.644Z,1478860828.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:29.010Z,1478860829.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:29.045Z,1478860829.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:29.410Z,1478860829.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:29.441Z,1478860829.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:29.815Z,1478860829.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:29.843Z,1478860829.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:30.210Z,1478860830.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:30.229Z,1478860830.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:30.614Z,1478860830.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:30.629Z,1478860830.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:31.018Z,1478860831.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:31.033Z,1478860831.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:31.417Z,1478860831.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:31.433Z,1478860831.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:31.814Z,1478860831.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:31.866Z,1478860831.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:32.220Z,1478860832.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:32.245Z,1478860832.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:32.609Z,1478860832.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:32.649Z,1478860832.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:33.013Z,1478860833.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:33.037Z,1478860833.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:33.438Z,1478860833.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:33.462Z,1478860833.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:33.809Z,1478860833.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:33.824Z,1478860833.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:34.213Z,1478860834.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:34.228Z,1478860834.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:34.613Z,1478860834.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:34.628Z,1478860834.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:35.013Z,1478860835.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:35.028Z,1478860835.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:35.421Z,1478860835.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:35.474Z,1478860835.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:35.815Z,1478860835.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:35.837Z,1478860835.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:36.216Z,1478860836.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:36.232Z,1478860836.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:36.621Z,1478860836.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:36.636Z,1478860836.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:37.017Z,1478860837.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:37.050Z,1478860837.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:37.425Z,1478860837.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:37.440Z,1478860837.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:37.809Z,1478860837.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:37.843Z,1478860837.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:38.209Z,1478860838.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:38.258Z,1478860838.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:38.609Z,1478860838.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:38.641Z,1478860838.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:39.009Z,1478860839.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:39.057Z,1478860839.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:39.418Z,1478860839.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:39.473Z,1478860839.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:39.809Z,1478860839.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:39.824Z,1478860839.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:40.209Z,1478860840.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:40.229Z,1478860840.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:40.617Z,1478860840.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:40.632Z,1478860840.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:41.016Z,1478860841.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:41.032Z,1478860841.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:41.412Z,1478860841.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:41.445Z,1478860841.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:41.815Z,1478860841.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:41.837Z,1478860841.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:42.216Z,1478860842.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:42.232Z,1478860842.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:42.609Z,1478860842.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:42.643Z,1478860842.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:43.009Z,1478860843.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:43.035Z,1478860843.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:43.409Z,1478860843.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:43.441Z,1478860843.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:43.809Z,1478860843.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:43.841Z,1478860843.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:44.209Z,1478860844.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:44.249Z,1478860844.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:44.642Z,1478860844.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:44.687Z,1478860844.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:45.009Z,1478860845.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:45.046Z,1478860845.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:45.409Z,1478860845.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:45.443Z,1478860845.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:45.814Z,1478860845.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:45.840Z,1478860845.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:46.209Z,1478860846.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:46.237Z,1478860846.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:46.609Z,1478860846.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:46.643Z,1478860846.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:47.009Z,1478860847.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:47.036Z,1478860847.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:47.409Z,1478860847.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:47.435Z,1478860847.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:47.809Z,1478860847.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:47.835Z,1478860847.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:48.209Z,1478860848.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:48.242Z,1478860848.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:48.630Z,1478860848.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:48.661Z,1478860848.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:49.009Z,1478860849.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:49.045Z,1478860849.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:49.417Z,1478860849.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:49.442Z,1478860849.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:49.809Z,1478860849.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:49.841Z,1478860849.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:50.219Z,1478860850.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:50.285Z,1478860850.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:50.609Z,1478860850.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:50.641Z,1478860850.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:51.009Z,1478860851.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:51.045Z,1478860851.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:51.417Z,1478860851.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:51.442Z,1478860851.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:51.809Z,1478860851.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:51.865Z,1478860851.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:52.209Z,1478860852.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:52.253Z,1478860852.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:52.613Z,1478860852.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:52.665Z,1478860852.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:53.009Z,1478860853.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:53.024Z,1478860853.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:53.428Z,1478860853.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:53.492Z,1478860853.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:53.809Z,1478860853.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:53.829Z,1478860853.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:54.209Z,1478860854.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:54.261Z,1478860854.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:54.540Z,1478860854.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:54.613Z,1478860854.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:54.633Z,1478860854.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:55.017Z,1478860855.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:55.037Z,1478860855.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:55.336Z,1478860855.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:55.417Z,1478860855.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:55.432Z,1478860855.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:55.816Z,1478860855.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:55.831Z,1478860855.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:56.217Z,1478860856.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:56.239Z,1478860856.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:56.618Z,1478860856.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:56.633Z,1478860856.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:57.016Z,1478860857.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:57.040Z,1478860857.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:57.416Z,1478860857.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:57.440Z,1478860857.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:57.817Z,1478860857.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:57.833Z,1478860857.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:58.216Z,1478860858.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:58.249Z,1478860858.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:58.621Z,1478860858.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:58.636Z,1478860858.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:59.009Z,1478860859.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:59.045Z,1478860859.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:59.409Z,1478860859.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:59.442Z,1478860859.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:40:59.809Z,1478860859.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:40:59.837Z,1478860859.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:00.209Z,1478860860.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:00.224Z,1478860860.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:00.609Z,1478860860.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:00.629Z,1478860860.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:01.014Z,1478860861.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:01.029Z,1478860861.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:01.430Z,1478860861.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:01.458Z,1478860861.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:01.827Z,1478860861.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:01.888Z,1478860861.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:02.217Z,1478860862.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:02.237Z,1478860862.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:02.615Z,1478860862.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:02.631Z,1478860862.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:03.016Z,1478860863.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:03.037Z,1478860863.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:03.416Z,1478860863.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:03.432Z,1478860863.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:03.823Z,1478860863.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:03.839Z,1478860863.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:04.212Z,1478860864.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:04.237Z,1478860864.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:04.609Z,1478860864.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:04.636Z,1478860864.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:05.009Z,1478860865.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:05.025Z,1478860865.026 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T10:41:05.026Z,1478860865.026 [BPC1] Data Fault, FailCount= 1
2016-11-11T10:41:05.026Z,1478860865.026 [BPC1](ERROR): Data Fault
2016-11-11T10:41:05.038Z,1478860865.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:05.094Z,1478860865.093 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T10:41:05.475Z,1478860865.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:05.522Z,1478860865.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:05.817Z,1478860865.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:05.837Z,1478860865.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:06.217Z,1478860866.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:06.232Z,1478860866.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:06.272Z,1478860866.272 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:41:06.272Z,1478860866.272 [BPC1] No Fault, FailCount= 1
2016-11-11T10:41:06.609Z,1478860866.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:06.682Z,1478860866.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:07.028Z,1478860867.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:07.085Z,1478860867.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:07.426Z,1478860867.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:07.442Z,1478860867.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:07.808Z,1478860867.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:07.844Z,1478860867.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:08.209Z,1478860868.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:08.245Z,1478860868.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:08.516Z,1478860868.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:08.609Z,1478860868.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:08.637Z,1478860868.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:09.009Z,1478860869.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:09.024Z,1478860869.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:09.312Z,1478860869.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:09.413Z,1478860869.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:09.449Z,1478860869.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:09.814Z,1478860869.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:09.860Z,1478860869.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:10.209Z,1478860870.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:10.254Z,1478860870.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:10.609Z,1478860870.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:10.624Z,1478860870.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:11.018Z,1478860871.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:11.049Z,1478860871.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:11.413Z,1478860871.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:11.433Z,1478860871.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:11.813Z,1478860871.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:11.828Z,1478860871.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:12.213Z,1478860872.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:12.233Z,1478860872.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:12.614Z,1478860872.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:12.638Z,1478860872.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:13.015Z,1478860873.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:13.037Z,1478860873.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:13.416Z,1478860873.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:13.473Z,1478860873.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:13.819Z,1478860873.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:13.847Z,1478860873.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:14.214Z,1478860874.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:14.241Z,1478860874.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:14.609Z,1478860874.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:14.625Z,1478860874.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:15.009Z,1478860875.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:15.041Z,1478860875.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:15.413Z,1478860875.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:15.437Z,1478860875.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:15.815Z,1478860875.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:15.835Z,1478860875.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:16.217Z,1478860876.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:16.237Z,1478860876.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:16.616Z,1478860876.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:16.645Z,1478860876.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:17.009Z,1478860877.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:17.045Z,1478860877.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:17.417Z,1478860877.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:17.459Z,1478860877.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:17.833Z,1478860877.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:17.950Z,1478860877.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:18.234Z,1478860878.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:18.254Z,1478860878.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:18.609Z,1478860878.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:18.647Z,1478860878.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:22.214Z,1478860882.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:22.296Z,1478860882.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:22.386Z,1478860882.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:22.421Z,1478860882.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:22.780Z,1478860882.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:22.796Z,1478860882.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:23.177Z,1478860883.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:23.197Z,1478860883.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:23.577Z,1478860883.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:23.681Z,1478860883.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:23.969Z,1478860883.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:24.009Z,1478860884.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:24.369Z,1478860884.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:24.421Z,1478860884.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:24.769Z,1478860884.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:24.815Z,1478860884.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:25.171Z,1478860885.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:25.210Z,1478860885.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:25.569Z,1478860885.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:25.670Z,1478860885.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:25.976Z,1478860885.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:25.992Z,1478860885.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:26.377Z,1478860886.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:26.397Z,1478860886.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:26.770Z,1478860886.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:26.804Z,1478860886.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:27.184Z,1478860887.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:27.236Z,1478860887.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:27.574Z,1478860887.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:27.589Z,1478860887.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:27.974Z,1478860887.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:27.990Z,1478860887.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:28.376Z,1478860888.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:28.392Z,1478860888.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:28.775Z,1478860888.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:28.797Z,1478860888.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:29.205Z,1478860889.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:29.240Z,1478860889.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:29.576Z,1478860889.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:29.591Z,1478860889.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:29.976Z,1478860889.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:29.997Z,1478860889.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:30.376Z,1478860890.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:30.397Z,1478860890.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:30.769Z,1478860890.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:30.805Z,1478860890.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:31.178Z,1478860891.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:31.242Z,1478860891.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:31.573Z,1478860891.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:31.609Z,1478860891.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:31.969Z,1478860891.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:32.006Z,1478860892.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:32.369Z,1478860892.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:32.389Z,1478860892.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:32.769Z,1478860892.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:32.789Z,1478860892.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:33.199Z,1478860893.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:33.243Z,1478860893.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:33.581Z,1478860893.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:33.596Z,1478860893.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:33.976Z,1478860893.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:33.991Z,1478860893.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:34.380Z,1478860894.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:34.396Z,1478860894.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:34.772Z,1478860894.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:34.794Z,1478860894.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:35.176Z,1478860895.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:35.283Z,1478860895.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:35.569Z,1478860895.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:35.589Z,1478860895.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:35.976Z,1478860895.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:35.991Z,1478860895.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:36.375Z,1478860896.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:36.397Z,1478860896.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:36.776Z,1478860896.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:36.792Z,1478860896.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:37.176Z,1478860897.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:37.210Z,1478860897.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:37.585Z,1478860897.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:37.657Z,1478860897.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:37.974Z,1478860897.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:38.030Z,1478860898.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:38.376Z,1478860898.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:38.397Z,1478860898.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:38.780Z,1478860898.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:38.819Z,1478860898.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:39.173Z,1478860899.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:39.223Z,1478860899.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:39.576Z,1478860899.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:39.665Z,1478860899.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:39.985Z,1478860899.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:40.005Z,1478860900.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:40.369Z,1478860900.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:40.395Z,1478860900.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:40.769Z,1478860900.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:40.801Z,1478860900.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:41.204Z,1478860901.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:41.232Z,1478860901.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:41.569Z,1478860901.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:41.585Z,1478860901.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:41.969Z,1478860901.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:41.997Z,1478860901.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:42.378Z,1478860902.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:42.406Z,1478860902.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:42.777Z,1478860902.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:42.793Z,1478860902.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:43.193Z,1478860903.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:43.209Z,1478860903.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:43.573Z,1478860903.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:43.600Z,1478860903.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:43.969Z,1478860903.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:43.993Z,1478860903.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:44.369Z,1478860904.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:44.408Z,1478860904.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:44.774Z,1478860904.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:44.805Z,1478860904.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:45.204Z,1478860905.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:45.241Z,1478860905.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:45.572Z,1478860905.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:45.590Z,1478860905.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:45.973Z,1478860905.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:45.993Z,1478860905.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:46.375Z,1478860906.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:46.392Z,1478860906.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:46.780Z,1478860906.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:46.801Z,1478860906.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:47.191Z,1478860907.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:47.211Z,1478860907.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:47.577Z,1478860907.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:47.593Z,1478860907.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:47.968Z,1478860907.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:47.994Z,1478860907.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:48.369Z,1478860908.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:48.404Z,1478860908.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:48.769Z,1478860908.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:48.802Z,1478860908.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:49.169Z,1478860909.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:49.201Z,1478860909.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:49.573Z,1478860909.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:49.582Z,1478860909.582 [BPC1](ERROR): Failed to parse message.
2016-11-11T10:41:49.582Z,1478860909.582 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T10:41:49.582Z,1478860909.582 [BPC1] Data Fault, FailCount= 1
2016-11-11T10:41:49.582Z,1478860909.582 [BPC1](ERROR): Data Fault
2016-11-11T10:41:49.599Z,1478860909.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:49.644Z,1478860909.644 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T10:41:49.981Z,1478860909.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:49.996Z,1478860909.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:50.377Z,1478860910.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:50.392Z,1478860910.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:50.769Z,1478860910.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:50.804Z,1478860910.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:50.836Z,1478860910.836 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:41:50.837Z,1478860910.837 [BPC1] No Fault, FailCount= 1
2016-11-11T10:41:51.169Z,1478860911.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:51.249Z,1478860911.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:51.585Z,1478860911.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:51.681Z,1478860911.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:51.977Z,1478860911.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:51.997Z,1478860911.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:52.376Z,1478860912.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:52.391Z,1478860912.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:52.781Z,1478860912.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:52.801Z,1478860912.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:53.173Z,1478860913.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:53.205Z,1478860913.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:53.589Z,1478860913.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:53.657Z,1478860913.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:53.973Z,1478860913.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:54.012Z,1478860914.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:54.370Z,1478860914.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:54.385Z,1478860914.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:54.775Z,1478860914.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:54.790Z,1478860914.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:55.176Z,1478860915.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:55.221Z,1478860915.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:55.582Z,1478860915.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:55.598Z,1478860915.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:55.978Z,1478860915.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:55.994Z,1478860915.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:56.377Z,1478860916.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:56.414Z,1478860916.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:56.769Z,1478860916.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:56.790Z,1478860916.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:57.178Z,1478860917.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:57.227Z,1478860917.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:57.569Z,1478860917.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:57.609Z,1478860917.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:57.969Z,1478860917.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:57.984Z,1478860917.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:58.371Z,1478860918.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:58.404Z,1478860918.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:58.776Z,1478860918.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:58.791Z,1478860918.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:59.191Z,1478860919.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:59.222Z,1478860919.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:59.569Z,1478860919.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:59.601Z,1478860919.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:41:59.980Z,1478860919.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:41:59.995Z,1478860919.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:00.370Z,1478860920.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:00.405Z,1478860920.405 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:00.405Z,1478860920.405 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98
2016-11-11T10:42:00.405Z,1478860920.405 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:42:00.420Z,1478860920.420 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:00.420Z,1478860920.420 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 98
2016-11-11T10:42:00.420Z,1478860920.420 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:42:00.422Z,1478860920.422 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:00.423Z,1478860920.422 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 98
2016-11-11T10:42:00.423Z,1478860920.423 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:42:00.453Z,1478860920.453 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:42:00.454Z,1478860920.454 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:42:00.454Z,1478860920.454 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:42:00.769Z,1478860920.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:00.826Z,1478860920.826 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:42:00.827Z,1478860920.827 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98
2016-11-11T10:42:00.831Z,1478860920.832 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:42:00.832Z,1478860920.832 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 98
2016-11-11T10:42:00.832Z,1478860920.832 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:42:00.832Z,1478860920.832 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 98
2016-11-11T10:42:01.196Z,1478860921.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:01.230Z,1478860921.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:42:01.230Z,1478860921.230 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:42:01.231Z,1478860921.231 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:42:01.244Z,1478860921.244 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:42:01.244Z,1478860921.244 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:42:01.245Z,1478860921.245 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:42:01.245Z,1478860921.245 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:42:01.246Z,1478860921.246 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:42:01.246Z,1478860921.246 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:42:01.577Z,1478860921.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:01.597Z,1478860921.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:01.984Z,1478860921.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:02.000Z,1478860922.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:02.370Z,1478860922.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:02.437Z,1478860922.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:02.769Z,1478860922.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:02.805Z,1478860922.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:03.170Z,1478860923.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:03.238Z,1478860923.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:03.569Z,1478860923.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:03.609Z,1478860923.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:03.969Z,1478860923.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:04.029Z,1478860924.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:04.376Z,1478860924.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:04.392Z,1478860924.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:04.776Z,1478860924.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:04.823Z,1478860924.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:05.176Z,1478860925.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:05.191Z,1478860925.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:05.628Z,1478860925.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:05.689Z,1478860925.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:05.975Z,1478860925.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:06.026Z,1478860926.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:06.375Z,1478860926.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:06.397Z,1478860926.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:06.776Z,1478860926.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:06.809Z,1478860926.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:07.185Z,1478860927.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:07.205Z,1478860927.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:07.585Z,1478860927.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:07.626Z,1478860927.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:07.976Z,1478860927.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:07.996Z,1478860927.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:08.376Z,1478860928.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:08.397Z,1478860928.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:08.776Z,1478860928.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:08.797Z,1478860928.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:09.170Z,1478860929.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:09.194Z,1478860929.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:09.569Z,1478860929.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:09.585Z,1478860929.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:09.973Z,1478860929.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:09.988Z,1478860929.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:10.376Z,1478860930.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:10.392Z,1478860930.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:10.774Z,1478860930.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:10.789Z,1478860930.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:11.169Z,1478860931.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:11.234Z,1478860931.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:11.580Z,1478860931.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:11.596Z,1478860931.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:11.975Z,1478860931.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:11.991Z,1478860931.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:12.376Z,1478860932.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:12.391Z,1478860932.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:12.776Z,1478860932.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:12.791Z,1478860932.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:13.181Z,1478860933.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:13.201Z,1478860933.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:13.577Z,1478860933.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:13.597Z,1478860933.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:13.981Z,1478860933.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:13.997Z,1478860933.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:14.369Z,1478860934.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:14.404Z,1478860934.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:14.769Z,1478860934.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:14.803Z,1478860934.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:15.169Z,1478860935.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:15.199Z,1478860935.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:15.570Z,1478860935.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:15.604Z,1478860935.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:15.969Z,1478860935.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:16.001Z,1478860936.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:16.369Z,1478860936.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:16.407Z,1478860936.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:16.769Z,1478860936.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:16.805Z,1478860936.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:17.193Z,1478860937.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:17.250Z,1478860937.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:17.577Z,1478860937.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:17.592Z,1478860937.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:17.976Z,1478860937.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:17.992Z,1478860937.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:18.375Z,1478860938.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:18.423Z,1478860938.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:18.772Z,1478860938.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:18.805Z,1478860938.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:22.191Z,1478860942.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:22.246Z,1478860942.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:22.349Z,1478860942.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:22.389Z,1478860942.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:22.717Z,1478860942.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:22.766Z,1478860942.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:23.148Z,1478860943.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:23.192Z,1478860943.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:23.526Z,1478860943.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:23.558Z,1478860943.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:23.922Z,1478860943.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:23.953Z,1478860943.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:24.323Z,1478860944.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:24.361Z,1478860944.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:24.722Z,1478860944.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:24.744Z,1478860944.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:25.135Z,1478860945.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:25.184Z,1478860945.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:25.526Z,1478860945.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:25.562Z,1478860945.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:25.918Z,1478860945.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:25.944Z,1478860945.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:26.317Z,1478860946.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:26.353Z,1478860946.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:26.717Z,1478860946.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:26.744Z,1478860946.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:27.136Z,1478860947.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:27.177Z,1478860947.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:27.521Z,1478860947.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:27.553Z,1478860947.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:27.917Z,1478860947.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:27.952Z,1478860947.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:28.317Z,1478860948.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:28.341Z,1478860948.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:28.717Z,1478860948.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:28.754Z,1478860948.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:29.121Z,1478860949.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:29.174Z,1478860949.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:29.517Z,1478860949.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:29.538Z,1478860949.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:29.920Z,1478860949.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:29.941Z,1478860949.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:30.320Z,1478860950.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:30.337Z,1478860950.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:30.725Z,1478860950.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:30.740Z,1478860950.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:31.125Z,1478860951.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:31.141Z,1478860951.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:31.524Z,1478860951.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:31.539Z,1478860951.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:31.928Z,1478860951.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:31.944Z,1478860951.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:32.317Z,1478860952.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:32.342Z,1478860952.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:32.717Z,1478860952.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:32.751Z,1478860952.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:33.117Z,1478860953.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:33.149Z,1478860953.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:33.569Z,1478860953.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:33.605Z,1478860953.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:33.917Z,1478860953.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:33.960Z,1478860953.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:34.317Z,1478860954.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:34.333Z,1478860954.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:34.723Z,1478860954.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:34.748Z,1478860954.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:35.117Z,1478860955.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:35.197Z,1478860955.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:35.533Z,1478860955.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:35.568Z,1478860955.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:35.932Z,1478860955.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:35.948Z,1478860955.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:36.317Z,1478860956.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:36.366Z,1478860956.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:36.717Z,1478860956.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:36.749Z,1478860956.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:37.119Z,1478860957.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:37.174Z,1478860957.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:37.517Z,1478860957.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:37.561Z,1478860957.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:37.942Z,1478860957.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:37.970Z,1478860957.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:38.319Z,1478860958.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:38.382Z,1478860958.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:38.726Z,1478860958.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:38.749Z,1478860958.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:39.128Z,1478860959.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:39.184Z,1478860959.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:39.523Z,1478860959.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:39.573Z,1478860959.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:39.932Z,1478860959.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:40.001Z,1478860960.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:40.326Z,1478860960.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:40.346Z,1478860960.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:40.719Z,1478860960.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:40.769Z,1478860960.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:41.152Z,1478860961.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:41.201Z,1478860961.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:41.526Z,1478860961.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:41.569Z,1478860961.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:41.919Z,1478860961.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:41.969Z,1478860961.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:42.321Z,1478860962.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:42.336Z,1478860962.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:42.717Z,1478860962.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:42.746Z,1478860962.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:43.143Z,1478860963.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:43.199Z,1478860963.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:43.519Z,1478860963.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:43.560Z,1478860963.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:43.917Z,1478860963.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:43.949Z,1478860963.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:44.317Z,1478860964.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:44.333Z,1478860964.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:44.719Z,1478860964.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:44.753Z,1478860964.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:45.206Z,1478860965.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:45.285Z,1478860965.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:45.518Z,1478860965.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:45.554Z,1478860965.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:45.931Z,1478860965.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:46.012Z,1478860966.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:46.317Z,1478860966.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:46.343Z,1478860966.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:46.725Z,1478860966.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:46.752Z,1478860966.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:47.119Z,1478860967.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:47.153Z,1478860967.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:47.525Z,1478860967.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:47.565Z,1478860967.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:47.923Z,1478860967.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:47.996Z,1478860967.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:48.325Z,1478860968.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:48.345Z,1478860968.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:48.725Z,1478860968.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:48.740Z,1478860968.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:49.129Z,1478860969.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:49.182Z,1478860969.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:49.559Z,1478860969.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:49.602Z,1478860969.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:49.936Z,1478860969.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:50.005Z,1478860970.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:50.322Z,1478860970.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:50.354Z,1478860970.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:50.722Z,1478860970.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:50.752Z,1478860970.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:51.118Z,1478860971.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:51.169Z,1478860971.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:51.521Z,1478860971.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:51.567Z,1478860971.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:51.923Z,1478860971.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:51.985Z,1478860971.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:52.326Z,1478860972.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:52.380Z,1478860972.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:52.727Z,1478860972.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:52.771Z,1478860972.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:53.125Z,1478860973.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:53.160Z,1478860973.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:53.519Z,1478860973.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:53.554Z,1478860973.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:53.917Z,1478860973.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:53.979Z,1478860973.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:54.319Z,1478860974.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:54.369Z,1478860974.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:54.718Z,1478860974.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:54.733Z,1478860974.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:55.127Z,1478860975.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:55.154Z,1478860975.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:55.519Z,1478860975.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:55.557Z,1478860975.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:55.919Z,1478860975.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:55.979Z,1478860975.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:56.335Z,1478860976.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:56.424Z,1478860976.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:56.724Z,1478860976.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:56.749Z,1478860976.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:57.131Z,1478860977.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:57.191Z,1478860977.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:57.519Z,1478860977.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:57.553Z,1478860977.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:57.919Z,1478860977.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:57.974Z,1478860977.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:58.323Z,1478860978.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:58.371Z,1478860978.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:58.726Z,1478860978.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:58.750Z,1478860978.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:59.133Z,1478860979.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:59.165Z,1478860979.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:59.524Z,1478860979.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:59.574Z,1478860979.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:42:59.927Z,1478860979.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:42:59.976Z,1478860979.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:00.319Z,1478860980.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:00.350Z,1478860980.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:00.719Z,1478860980.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:00.762Z,1478860980.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:01.128Z,1478860981.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:01.158Z,1478860981.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:01.520Z,1478860981.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:01.545Z,1478860981.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:01.919Z,1478860981.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:01.964Z,1478860981.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:02.319Z,1478860982.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:02.368Z,1478860982.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:02.731Z,1478860982.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:02.783Z,1478860982.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:03.124Z,1478860983.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:03.144Z,1478860983.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:03.523Z,1478860983.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:03.595Z,1478860983.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:03.923Z,1478860983.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:03.958Z,1478860983.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:04.320Z,1478860984.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:04.454Z,1478860984.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:04.720Z,1478860984.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:04.762Z,1478860984.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:05.117Z,1478860985.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:05.150Z,1478860985.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:05.520Z,1478860985.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:05.571Z,1478860985.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:05.924Z,1478860985.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:05.940Z,1478860985.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:06.325Z,1478860986.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:06.378Z,1478860986.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:06.724Z,1478860986.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:06.781Z,1478860986.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:07.133Z,1478860987.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:07.153Z,1478860987.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:07.524Z,1478860987.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:07.546Z,1478860987.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:07.917Z,1478860987.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:07.950Z,1478860987.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:08.328Z,1478860988.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:08.343Z,1478860988.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:08.732Z,1478860988.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:08.747Z,1478860988.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:09.132Z,1478860989.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:09.148Z,1478860989.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:09.517Z,1478860989.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:09.550Z,1478860989.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:09.917Z,1478860989.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:09.951Z,1478860989.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:10.317Z,1478860990.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:10.349Z,1478860990.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:10.717Z,1478860990.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:10.751Z,1478860990.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:11.135Z,1478860991.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:11.150Z,1478860991.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:11.517Z,1478860991.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:11.549Z,1478860991.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:11.917Z,1478860991.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:11.949Z,1478860991.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:12.317Z,1478860992.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:12.353Z,1478860992.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:12.717Z,1478860992.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:12.741Z,1478860992.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:13.149Z,1478860993.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:13.173Z,1478860993.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:13.517Z,1478860993.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:13.561Z,1478860993.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:13.917Z,1478860993.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:13.933Z,1478860993.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:14.317Z,1478860994.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:14.337Z,1478860994.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:14.721Z,1478860994.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:14.736Z,1478860994.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:15.120Z,1478860995.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:15.136Z,1478860995.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:15.522Z,1478860995.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:15.557Z,1478860995.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:15.921Z,1478860995.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:15.940Z,1478860995.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:16.324Z,1478860996.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:16.340Z,1478860996.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:16.725Z,1478860996.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:16.740Z,1478860996.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:17.132Z,1478860997.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:17.148Z,1478860997.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:17.534Z,1478860997.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:17.552Z,1478860997.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:17.917Z,1478860997.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:17.949Z,1478860997.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:18.332Z,1478860998.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:18.353Z,1478860998.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:18.717Z,1478860998.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:18.793Z,1478860998.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:19.117Z,1478860999.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:19.133Z,1478860999.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:22.552Z,1478861002.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:22.594Z,1478861002.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:22.681Z,1478861002.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:22.709Z,1478861002.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:23.045Z,1478861003.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:23.093Z,1478861003.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:23.449Z,1478861003.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:23.490Z,1478861003.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:23.845Z,1478861003.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:23.861Z,1478861003.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:24.249Z,1478861004.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:24.269Z,1478861004.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:24.646Z,1478861004.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:24.661Z,1478861004.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:25.045Z,1478861005.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:25.062Z,1478861005.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:25.449Z,1478861005.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:25.469Z,1478861005.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:25.849Z,1478861005.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:25.864Z,1478861005.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:26.249Z,1478861006.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:26.265Z,1478861006.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:26.649Z,1478861006.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:26.669Z,1478861006.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:27.058Z,1478861007.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:27.090Z,1478861007.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:27.445Z,1478861007.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:27.461Z,1478861007.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:27.800Z,1478861007.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:27.849Z,1478861007.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:27.869Z,1478861007.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:28.245Z,1478861008.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:28.260Z,1478861008.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:28.596Z,1478861008.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:28.649Z,1478861008.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:28.669Z,1478861008.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:29.045Z,1478861009.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:29.062Z,1478861009.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:29.449Z,1478861009.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:29.471Z,1478861009.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:29.842Z,1478861009.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:29.857Z,1478861009.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:30.249Z,1478861010.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:30.269Z,1478861010.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:30.645Z,1478861010.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:30.661Z,1478861010.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:31.049Z,1478861011.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:31.065Z,1478861011.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:31.454Z,1478861011.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:31.513Z,1478861011.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:31.848Z,1478861011.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:31.869Z,1478861011.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:32.249Z,1478861012.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:32.269Z,1478861012.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:32.649Z,1478861012.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:32.669Z,1478861012.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:33.045Z,1478861013.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:33.061Z,1478861013.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:33.445Z,1478861013.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:33.461Z,1478861013.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:33.849Z,1478861013.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:33.869Z,1478861013.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:34.245Z,1478861014.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:34.265Z,1478861014.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:34.649Z,1478861014.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:34.665Z,1478861014.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:35.045Z,1478861015.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:35.065Z,1478861015.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:35.449Z,1478861015.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:35.482Z,1478861015.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:35.845Z,1478861015.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:35.889Z,1478861015.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:36.246Z,1478861016.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:36.262Z,1478861016.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:36.678Z,1478861016.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:36.765Z,1478861016.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:37.050Z,1478861017.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:37.065Z,1478861017.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:37.449Z,1478861017.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:37.497Z,1478861017.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:37.845Z,1478861017.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:37.886Z,1478861017.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:38.250Z,1478861018.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:38.273Z,1478861018.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:38.649Z,1478861018.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:38.666Z,1478861018.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:39.049Z,1478861019.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:39.065Z,1478861019.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:39.449Z,1478861019.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:39.465Z,1478861019.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:39.849Z,1478861019.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:39.866Z,1478861019.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:40.249Z,1478861020.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:40.264Z,1478861020.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:40.642Z,1478861020.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:40.657Z,1478861020.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:41.053Z,1478861021.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:41.078Z,1478861021.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:41.445Z,1478861021.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:41.465Z,1478861021.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:41.849Z,1478861021.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:41.865Z,1478861021.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:42.249Z,1478861022.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:42.264Z,1478861022.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:42.649Z,1478861022.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:42.664Z,1478861022.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:43.049Z,1478861023.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:43.065Z,1478861023.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:43.452Z,1478861023.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:43.467Z,1478861023.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:43.845Z,1478861023.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:43.860Z,1478861023.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:44.249Z,1478861024.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:44.265Z,1478861024.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:44.646Z,1478861024.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:44.766Z,1478861024.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:45.046Z,1478861025.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:45.082Z,1478861025.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:45.449Z,1478861025.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:45.474Z,1478861025.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:45.845Z,1478861025.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:45.873Z,1478861025.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:46.257Z,1478861026.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:46.285Z,1478861026.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:46.646Z,1478861026.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:46.673Z,1478861026.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:47.045Z,1478861027.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:47.065Z,1478861027.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:47.445Z,1478861027.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:47.481Z,1478861027.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:47.845Z,1478861027.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:47.873Z,1478861027.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:48.245Z,1478861028.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:48.273Z,1478861028.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:48.645Z,1478861028.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:48.665Z,1478861028.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:49.050Z,1478861029.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:49.059Z,1478861029.059 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T10:43:49.059Z,1478861029.059 [BPC1] Data Fault, FailCount= 1
2016-11-11T10:43:49.064Z,1478861029.064 [BPC1](ERROR): Data Fault
2016-11-11T10:43:49.089Z,1478861029.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:49.134Z,1478861029.134 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T10:43:49.445Z,1478861029.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:49.473Z,1478861029.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:49.845Z,1478861029.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:49.877Z,1478861029.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:50.245Z,1478861030.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:50.269Z,1478861030.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:50.314Z,1478861030.314 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:43:50.314Z,1478861030.314 [BPC1] No Fault, FailCount= 1
2016-11-11T10:43:50.645Z,1478861030.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:50.718Z,1478861030.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:51.045Z,1478861031.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:51.094Z,1478861031.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:51.453Z,1478861031.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:51.469Z,1478861031.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:51.852Z,1478861031.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:51.867Z,1478861031.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:52.251Z,1478861032.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:52.266Z,1478861032.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:52.652Z,1478861032.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:52.668Z,1478861032.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:53.052Z,1478861033.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:53.073Z,1478861033.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:53.457Z,1478861033.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:53.489Z,1478861033.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:53.845Z,1478861033.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:53.871Z,1478861033.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:54.245Z,1478861034.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:54.279Z,1478861034.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:54.645Z,1478861034.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:54.678Z,1478861034.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:55.060Z,1478861035.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:55.116Z,1478861035.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:55.445Z,1478861035.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:55.477Z,1478861035.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:55.849Z,1478861035.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:55.881Z,1478861035.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:56.245Z,1478861036.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:56.277Z,1478861036.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:56.645Z,1478861036.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:56.678Z,1478861036.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:57.045Z,1478861037.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:57.078Z,1478861037.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:57.447Z,1478861037.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:57.477Z,1478861037.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:57.845Z,1478861037.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:57.879Z,1478861037.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:58.249Z,1478861038.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:58.281Z,1478861038.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:58.645Z,1478861038.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:58.678Z,1478861038.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:59.045Z,1478861039.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:59.079Z,1478861039.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:59.447Z,1478861039.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:59.500Z,1478861039.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:43:59.845Z,1478861039.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:43:59.877Z,1478861039.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:00.245Z,1478861040.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:00.281Z,1478861040.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:00.653Z,1478861040.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:00.682Z,1478861040.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:01.050Z,1478861041.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:01.078Z,1478861041.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:01.445Z,1478861041.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:01.465Z,1478861041.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:01.845Z,1478861041.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:01.873Z,1478861041.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:02.251Z,1478861042.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:02.271Z,1478861042.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:02.652Z,1478861042.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:02.678Z,1478861042.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:03.061Z,1478861043.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:03.122Z,1478861043.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:03.445Z,1478861043.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:03.509Z,1478861043.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:03.845Z,1478861043.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:03.877Z,1478861043.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:04.249Z,1478861044.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:04.305Z,1478861044.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:04.645Z,1478861044.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:04.660Z,1478861044.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:05.053Z,1478861045.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:05.101Z,1478861045.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:05.457Z,1478861045.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:05.505Z,1478861045.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:05.845Z,1478861045.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:05.860Z,1478861045.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:06.245Z,1478861046.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:06.265Z,1478861046.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:06.653Z,1478861046.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:06.669Z,1478861046.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:07.057Z,1478861047.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:07.072Z,1478861047.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:07.452Z,1478861047.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:07.469Z,1478861047.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:07.848Z,1478861047.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:07.876Z,1478861047.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:08.252Z,1478861048.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:08.268Z,1478861048.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:08.653Z,1478861048.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:08.669Z,1478861048.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:09.060Z,1478861049.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:09.092Z,1478861049.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:09.445Z,1478861049.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:09.477Z,1478861049.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:09.845Z,1478861049.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:09.881Z,1478861049.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:10.249Z,1478861050.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:10.285Z,1478861050.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:10.645Z,1478861050.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:10.660Z,1478861050.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:11.045Z,1478861051.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:11.065Z,1478861051.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:11.454Z,1478861051.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:11.498Z,1478861051.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:11.854Z,1478861051.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:11.869Z,1478861051.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:12.253Z,1478861052.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:12.268Z,1478861052.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:12.657Z,1478861052.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:12.673Z,1478861052.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:13.057Z,1478861053.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:13.072Z,1478861053.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:13.445Z,1478861053.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:13.480Z,1478861053.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:13.845Z,1478861053.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:13.878Z,1478861053.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:14.249Z,1478861054.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:14.275Z,1478861054.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:14.646Z,1478861054.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:14.683Z,1478861054.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:15.045Z,1478861055.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:15.078Z,1478861055.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:15.445Z,1478861055.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:15.481Z,1478861055.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:15.846Z,1478861055.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:15.877Z,1478861055.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:16.245Z,1478861056.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:16.281Z,1478861056.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:16.645Z,1478861056.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:16.665Z,1478861056.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:17.050Z,1478861057.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:17.069Z,1478861057.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:17.448Z,1478861057.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:17.521Z,1478861057.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:17.849Z,1478861057.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:17.874Z,1478861057.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:18.252Z,1478861058.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:18.274Z,1478861058.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:18.652Z,1478861058.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:18.708Z,1478861058.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:19.060Z,1478861059.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:19.075Z,1478861059.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:19.452Z,1478861059.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:19.512Z,1478861059.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:22.882Z,1478861062.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:22.955Z,1478861062.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:23.156Z,1478861063.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:23.189Z,1478861063.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:23.526Z,1478861063.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:23.561Z,1478861063.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:23.925Z,1478861063.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:23.960Z,1478861063.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:24.325Z,1478861064.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:24.357Z,1478861064.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:24.725Z,1478861064.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:24.752Z,1478861064.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:25.125Z,1478861065.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:25.152Z,1478861065.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:25.525Z,1478861065.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:25.553Z,1478861065.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:25.925Z,1478861065.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:25.961Z,1478861065.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:26.325Z,1478861066.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:26.361Z,1478861066.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:26.725Z,1478861066.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:26.764Z,1478861066.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:27.125Z,1478861067.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:27.162Z,1478861067.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:27.525Z,1478861067.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:27.540Z,1478861067.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:27.925Z,1478861067.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:27.945Z,1478861067.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:28.328Z,1478861068.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:28.349Z,1478861068.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:28.728Z,1478861068.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:28.743Z,1478861068.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:29.133Z,1478861069.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:29.149Z,1478861069.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:29.532Z,1478861069.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:29.547Z,1478861069.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:29.932Z,1478861069.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:29.947Z,1478861069.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:30.327Z,1478861070.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:30.350Z,1478861070.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:30.735Z,1478861070.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:30.762Z,1478861070.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:31.125Z,1478861071.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:31.152Z,1478861071.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:31.525Z,1478861071.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:31.557Z,1478861071.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:31.925Z,1478861071.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:31.967Z,1478861071.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:32.325Z,1478861072.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:32.360Z,1478861072.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:32.725Z,1478861072.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:32.757Z,1478861072.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:33.136Z,1478861073.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:33.165Z,1478861073.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:33.525Z,1478861073.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:33.557Z,1478861073.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:33.925Z,1478861073.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:33.972Z,1478861073.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:34.325Z,1478861074.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:34.368Z,1478861074.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:34.725Z,1478861074.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:34.781Z,1478861074.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:35.132Z,1478861075.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:35.193Z,1478861075.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:35.532Z,1478861075.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:35.554Z,1478861075.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:35.925Z,1478861075.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:35.974Z,1478861075.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:36.325Z,1478861076.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:36.357Z,1478861076.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:36.725Z,1478861076.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:36.774Z,1478861076.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:37.140Z,1478861077.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:37.182Z,1478861077.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:37.525Z,1478861077.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:37.556Z,1478861077.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:37.933Z,1478861077.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:37.965Z,1478861077.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:38.329Z,1478861078.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:38.361Z,1478861078.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:38.725Z,1478861078.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:38.761Z,1478861078.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:39.133Z,1478861079.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:39.159Z,1478861079.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:39.525Z,1478861079.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:39.561Z,1478861079.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:39.925Z,1478861079.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:39.978Z,1478861079.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:40.325Z,1478861080.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:40.368Z,1478861080.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:40.725Z,1478861080.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:40.761Z,1478861080.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:41.128Z,1478861081.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:41.144Z,1478861081.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:41.525Z,1478861081.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:41.540Z,1478861081.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:41.933Z,1478861081.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:41.948Z,1478861081.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:42.332Z,1478861082.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:42.348Z,1478861082.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:42.731Z,1478861082.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:42.753Z,1478861082.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:43.133Z,1478861083.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:43.153Z,1478861083.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:43.532Z,1478861083.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:43.548Z,1478861083.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:43.925Z,1478861083.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:43.959Z,1478861083.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:44.336Z,1478861084.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:44.352Z,1478861084.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:44.732Z,1478861084.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:44.755Z,1478861084.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:45.125Z,1478861085.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:45.161Z,1478861085.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:45.529Z,1478861085.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:45.544Z,1478861085.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:45.925Z,1478861085.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:45.960Z,1478861085.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:46.332Z,1478861086.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:46.347Z,1478861086.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:46.727Z,1478861086.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:46.758Z,1478861086.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:47.132Z,1478861087.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:47.147Z,1478861087.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:47.532Z,1478861087.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:47.547Z,1478861087.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:47.932Z,1478861087.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:47.962Z,1478861087.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:48.325Z,1478861088.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:48.357Z,1478861088.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:48.725Z,1478861088.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:48.757Z,1478861088.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:49.137Z,1478861089.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:49.205Z,1478861089.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:49.531Z,1478861089.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:49.547Z,1478861089.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:49.932Z,1478861089.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:49.947Z,1478861089.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:50.349Z,1478861090.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:50.406Z,1478861090.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:50.732Z,1478861090.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:50.747Z,1478861090.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:51.134Z,1478861091.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:51.188Z,1478861091.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:51.529Z,1478861091.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:51.577Z,1478861091.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:51.948Z,1478861091.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:51.980Z,1478861091.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:52.325Z,1478861092.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:52.361Z,1478861092.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:52.729Z,1478861092.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:52.754Z,1478861092.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:53.133Z,1478861093.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:53.159Z,1478861093.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:53.525Z,1478861093.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:53.561Z,1478861093.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:53.933Z,1478861093.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:53.959Z,1478861093.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:54.325Z,1478861094.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:54.365Z,1478861094.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:54.725Z,1478861094.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:54.745Z,1478861094.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:55.133Z,1478861095.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:55.169Z,1478861095.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:55.525Z,1478861095.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:55.540Z,1478861095.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:55.929Z,1478861095.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:55.949Z,1478861095.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:56.328Z,1478861096.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:56.349Z,1478861096.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:56.732Z,1478861096.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:56.748Z,1478861096.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:57.125Z,1478861097.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:57.158Z,1478861097.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:57.532Z,1478861097.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:57.556Z,1478861097.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:57.925Z,1478861097.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:57.960Z,1478861097.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:58.325Z,1478861098.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:58.357Z,1478861098.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:58.725Z,1478861098.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:58.757Z,1478861098.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:59.129Z,1478861099.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:59.149Z,1478861099.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:59.536Z,1478861099.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:59.551Z,1478861099.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:44:59.927Z,1478861099.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:44:59.967Z,1478861099.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:00.332Z,1478861100.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:00.354Z,1478861100.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:00.732Z,1478861100.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:00.757Z,1478861100.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:01.125Z,1478861101.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:01.161Z,1478861101.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:01.529Z,1478861101.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:01.557Z,1478861101.557 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:01.558Z,1478861101.557 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99
2016-11-11T10:45:01.558Z,1478861101.558 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:45:01.568Z,1478861101.568 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:01.568Z,1478861101.569 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 99
2016-11-11T10:45:01.569Z,1478861101.569 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:45:01.571Z,1478861101.571 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:01.571Z,1478861101.571 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 99
2016-11-11T10:45:01.575Z,1478861101.575 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:45:01.608Z,1478861101.608 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:45:01.608Z,1478861101.608 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:45:01.608Z,1478861101.608 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:45:01.935Z,1478861101.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:01.995Z,1478861101.995 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:45:01.995Z,1478861101.995 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99
2016-11-11T10:45:01.996Z,1478861101.996 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:45:01.996Z,1478861101.996 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 99
2016-11-11T10:45:01.997Z,1478861101.997 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:45:01.997Z,1478861101.997 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 99
2016-11-11T10:45:02.328Z,1478861102.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:02.359Z,1478861102.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:45:02.359Z,1478861102.359 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:45:02.360Z,1478861102.360 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:45:02.372Z,1478861102.372 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:45:02.373Z,1478861102.373 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:45:02.373Z,1478861102.373 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:45:02.374Z,1478861102.374 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:45:02.374Z,1478861102.374 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:45:02.375Z,1478861102.375 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:45:02.736Z,1478861102.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:02.752Z,1478861102.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:03.125Z,1478861103.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:03.161Z,1478861103.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:03.525Z,1478861103.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:03.592Z,1478861103.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:03.925Z,1478861103.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:03.981Z,1478861103.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:04.325Z,1478861104.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:04.369Z,1478861104.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:04.725Z,1478861104.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:04.761Z,1478861104.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:05.141Z,1478861105.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:05.197Z,1478861105.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:05.528Z,1478861105.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:05.543Z,1478861105.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:05.928Z,1478861105.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:05.974Z,1478861105.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:06.332Z,1478861106.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:06.388Z,1478861106.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:06.732Z,1478861106.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:06.753Z,1478861106.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:07.131Z,1478861107.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:07.146Z,1478861107.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:07.532Z,1478861107.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:07.547Z,1478861107.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:07.935Z,1478861107.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:07.963Z,1478861107.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:08.325Z,1478861108.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:08.359Z,1478861108.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:08.725Z,1478861108.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:08.757Z,1478861108.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:09.125Z,1478861109.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:09.159Z,1478861109.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:09.525Z,1478861109.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:09.561Z,1478861109.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:09.925Z,1478861109.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:09.950Z,1478861109.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:10.325Z,1478861110.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:10.359Z,1478861110.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:10.725Z,1478861110.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:10.759Z,1478861110.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:11.125Z,1478861111.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:11.157Z,1478861111.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:11.529Z,1478861111.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:11.561Z,1478861111.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:11.925Z,1478861111.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:11.952Z,1478861111.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:12.325Z,1478861112.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:12.361Z,1478861112.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:12.725Z,1478861112.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:12.761Z,1478861112.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:13.125Z,1478861113.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:13.145Z,1478861113.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:13.529Z,1478861113.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:13.549Z,1478861113.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:13.936Z,1478861113.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:13.981Z,1478861113.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:14.331Z,1478861114.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:14.353Z,1478861114.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:14.732Z,1478861114.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:14.748Z,1478861114.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:15.136Z,1478861115.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:15.164Z,1478861115.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:15.529Z,1478861115.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:15.561Z,1478861115.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:15.925Z,1478861115.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:15.957Z,1478861115.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:16.325Z,1478861116.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:16.362Z,1478861116.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:16.725Z,1478861116.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:16.757Z,1478861116.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:17.137Z,1478861117.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:17.153Z,1478861117.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:17.532Z,1478861117.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:17.547Z,1478861117.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:17.936Z,1478861117.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:18.013Z,1478861118.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:18.333Z,1478861118.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:18.397Z,1478861118.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:18.414Z,1478861118.414 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T10:45:18.415Z,1478861118.415 [Default:CheckIn:C.Wait] Stopped
2016-11-11T10:45:18.415Z,1478861118.415 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T10:45:18.419Z,1478861118.419 [Default:CheckIn:D] Running Loop=1
2016-11-11T10:45:18.725Z,1478861118.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:18.757Z,1478861118.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:18.766Z,1478861118.766 [Default:CheckIn:D] Stopped
2016-11-11T10:45:18.766Z,1478861118.766 [Default:CheckIn:E] Running Loop=1
2016-11-11T10:45:19.125Z,1478861119.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:19.195Z,1478861119.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:19.204Z,1478861119.204 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 355.290918 min 
2016-11-11T10:45:19.204Z,1478861119.204 [Default:CheckIn:E] Stopped
2016-11-11T10:45:19.204Z,1478861119.204 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T10:45:19.204Z,1478861119.204 [Default:CheckIn] Stopped
2016-11-11T10:45:19.204Z,1478861119.204 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T10:45:19.204Z,1478861119.204 [Default:CheckIn](INFO): Running loop #35
2016-11-11T10:45:19.205Z,1478861119.204 [Default:CheckIn] Running Loop=35
2016-11-11T10:45:19.205Z,1478861119.205 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T10:45:19.205Z,1478861119.205 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T10:45:19.526Z,1478861119.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:19.568Z,1478861119.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:23.043Z,1478861123.043 [NAL9602](INFO): Powering up
2016-11-11T10:45:23.061Z,1478861123.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:23.117Z,1478861123.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:23.209Z,1478861123.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:23.282Z,1478861123.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:23.593Z,1478861123.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:23.649Z,1478861123.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:23.993Z,1478861123.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:24.036Z,1478861124.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:24.393Z,1478861124.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:24.409Z,1478861124.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:24.848Z,1478861124.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:24.889Z,1478861124.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:25.200Z,1478861125.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:25.216Z,1478861125.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:25.599Z,1478861125.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:25.627Z,1478861125.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:25.000Z,1478861126.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:26.021Z,1478861126.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:26.400Z,1478861126.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:26.427Z,1478861126.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:26.808Z,1478861126.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:26.861Z,1478861126.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:27.193Z,1478861127.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:27.221Z,1478861127.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:27.593Z,1478861127.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:27.621Z,1478861127.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:27.994Z,1478861127.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:28.013Z,1478861128.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:28.393Z,1478861128.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:28.421Z,1478861128.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:28.800Z,1478861128.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:28.854Z,1478861128.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:29.206Z,1478861129.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:29.225Z,1478861129.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:29.593Z,1478861129.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:29.621Z,1478861129.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:29.993Z,1478861129.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:30.027Z,1478861130.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:30.393Z,1478861130.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:30.413Z,1478861130.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:30.831Z,1478861130.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:30.862Z,1478861130.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:31.200Z,1478861131.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:31.216Z,1478861131.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:31.601Z,1478861131.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:31.617Z,1478861131.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:31.999Z,1478861131.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:32.021Z,1478861132.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:32.396Z,1478861132.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:32.426Z,1478861132.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:32.805Z,1478861132.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:32.821Z,1478861132.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:33.206Z,1478861133.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:33.230Z,1478861133.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:33.604Z,1478861133.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:33.629Z,1478861133.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:33.981Z,1478861133.981 [NAL9602](INFO): NAL9602 initialized
2016-11-11T10:45:33.998Z,1478861133.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:34.034Z,1478861134.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:34.397Z,1478861134.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:34.434Z,1478861134.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:34.777Z,1478861134.777 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T10:45:34.777Z,1478861134.777 [NAL9602] Data Fault, FailCount= 1
2016-11-11T10:45:34.777Z,1478861134.777 [NAL9602](ERROR): Data Fault
2016-11-11T10:45:34.794Z,1478861134.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:34.845Z,1478861134.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:34.882Z,1478861134.882 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T10:45:35.176Z,1478861135.177 [NAL9602](INFO): Powering down
2016-11-11T10:45:35.197Z,1478861135.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:35.274Z,1478861135.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:35.600Z,1478861135.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:35.677Z,1478861135.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:36.001Z,1478861136.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:36.017Z,1478861136.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:36.036Z,1478861136.036 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T10:45:36.036Z,1478861136.036 [NAL9602] No Fault, FailCount= 1
2016-11-11T10:45:36.400Z,1478861136.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:36.424Z,1478861136.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:36.800Z,1478861136.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:36.863Z,1478861136.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:37.193Z,1478861137.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:37.283Z,1478861137.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:37.601Z,1478861137.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:37.649Z,1478861137.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:38.001Z,1478861138.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:38.016Z,1478861138.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:38.399Z,1478861138.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:38.452Z,1478861138.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:38.818Z,1478861138.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:38.850Z,1478861138.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:39.194Z,1478861139.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:39.230Z,1478861139.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:39.593Z,1478861139.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:39.627Z,1478861139.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:39.997Z,1478861139.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:40.029Z,1478861140.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:40.377Z,1478861140.377 [NAL9602](INFO): Powering up NAL9602
2016-11-11T10:45:40.394Z,1478861140.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:40.433Z,1478861140.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:40.817Z,1478861140.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:40.860Z,1478861140.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:41.198Z,1478861141.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:41.226Z,1478861141.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:41.593Z,1478861141.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:41.613Z,1478861141.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:42.002Z,1478861142.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:42.029Z,1478861142.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:42.397Z,1478861142.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:42.413Z,1478861142.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:42.818Z,1478861142.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:42.845Z,1478861142.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:43.193Z,1478861143.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:43.225Z,1478861143.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:43.597Z,1478861143.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:43.629Z,1478861143.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:43.994Z,1478861143.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:44.030Z,1478861144.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:44.393Z,1478861144.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:44.436Z,1478861144.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:44.807Z,1478861144.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:44.843Z,1478861144.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:45.198Z,1478861145.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:45.217Z,1478861145.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:45.602Z,1478861145.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:45.617Z,1478861145.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:46.002Z,1478861146.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:46.018Z,1478861146.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:46.400Z,1478861146.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:46.416Z,1478861146.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:46.806Z,1478861146.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:46.822Z,1478861146.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:47.193Z,1478861147.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:47.226Z,1478861147.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:47.604Z,1478861147.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:47.620Z,1478861147.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:47.994Z,1478861147.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:48.025Z,1478861148.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:48.398Z,1478861148.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:48.433Z,1478861148.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:48.793Z,1478861148.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:48.837Z,1478861148.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:49.210Z,1478861149.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:49.301Z,1478861149.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:49.601Z,1478861149.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:49.617Z,1478861149.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:50.001Z,1478861150.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:50.016Z,1478861150.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:50.400Z,1478861150.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:50.489Z,1478861150.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:50.800Z,1478861150.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:50.816Z,1478861150.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:51.228Z,1478861151.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:51.302Z,1478861151.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:51.577Z,1478861151.577 [NAL9602](INFO): NAL9602 initialized
2016-11-11T10:45:51.593Z,1478861151.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:51.644Z,1478861151.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:51.993Z,1478861151.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:52.038Z,1478861152.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:52.404Z,1478861152.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:52.462Z,1478861152.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:52.809Z,1478861152.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:52.837Z,1478861152.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:53.204Z,1478861153.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:53.234Z,1478861153.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:53.596Z,1478861153.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:53.628Z,1478861153.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:54.002Z,1478861154.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:54.025Z,1478861154.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:54.394Z,1478861154.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:54.421Z,1478861154.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:54.442Z,1478861154.441 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T10:45:54.813Z,1478861154.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:54.841Z,1478861154.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:55.193Z,1478861155.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:55.237Z,1478861155.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:55.594Z,1478861155.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:55.609Z,1478861155.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:55.993Z,1478861155.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:56.014Z,1478861156.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:56.396Z,1478861156.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:56.417Z,1478861156.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:56.806Z,1478861156.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:56.837Z,1478861156.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:57.204Z,1478861157.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:57.220Z,1478861157.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:57.600Z,1478861157.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:57.621Z,1478861157.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:58.004Z,1478861158.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:58.020Z,1478861158.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:58.393Z,1478861158.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:58.425Z,1478861158.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:58.815Z,1478861158.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:58.839Z,1478861158.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:59.194Z,1478861159.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:59.221Z,1478861159.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:59.609Z,1478861159.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:45:59.629Z,1478861159.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:45:59.994Z,1478861159.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:00.025Z,1478861160.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:00.408Z,1478861160.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:00.442Z,1478861160.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:00.814Z,1478861160.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:00.898Z,1478861160.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:01.201Z,1478861161.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:01.221Z,1478861161.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:01.597Z,1478861161.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:01.612Z,1478861161.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:02.001Z,1478861162.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:02.021Z,1478861162.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:02.052Z,1478861162.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:02.400Z,1478861162.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:02.416Z,1478861162.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:02.797Z,1478861162.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:02.821Z,1478861162.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:02.848Z,1478861162.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:03.220Z,1478861163.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:03.267Z,1478861163.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:03.593Z,1478861163.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:03.625Z,1478861163.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:03.994Z,1478861163.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:04.020Z,1478861164.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:04.405Z,1478861164.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:04.477Z,1478861164.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:04.821Z,1478861164.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:04.841Z,1478861164.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:05.273Z,1478861165.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:05.328Z,1478861165.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:05.597Z,1478861165.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:05.629Z,1478861165.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:05.997Z,1478861165.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:06.063Z,1478861166.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:06.393Z,1478861166.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:06.441Z,1478861166.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:06.799Z,1478861166.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:06.826Z,1478861166.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:07.197Z,1478861167.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:07.225Z,1478861167.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:07.594Z,1478861167.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:07.609Z,1478861167.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:07.993Z,1478861167.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:08.013Z,1478861168.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:08.393Z,1478861168.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:08.413Z,1478861168.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:08.810Z,1478861168.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:08.838Z,1478861168.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:09.197Z,1478861169.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:09.217Z,1478861169.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:09.596Z,1478861169.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:09.617Z,1478861169.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:10.003Z,1478861170.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:10.018Z,1478861170.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:10.405Z,1478861170.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:10.421Z,1478861170.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:10.799Z,1478861170.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:10.843Z,1478861170.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:11.201Z,1478861171.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:11.217Z,1478861171.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:11.604Z,1478861171.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:11.625Z,1478861171.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:11.993Z,1478861171.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:12.027Z,1478861172.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:12.394Z,1478861172.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:12.429Z,1478861172.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:12.793Z,1478861172.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:12.829Z,1478861172.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:13.213Z,1478861173.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:13.240Z,1478861173.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:13.620Z,1478861173.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:13.636Z,1478861173.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:14.001Z,1478861174.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:14.027Z,1478861174.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:14.393Z,1478861174.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:14.429Z,1478861174.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:14.804Z,1478861174.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:14.861Z,1478861174.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:15.208Z,1478861175.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:15.224Z,1478861175.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:15.593Z,1478861175.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:15.628Z,1478861175.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:16.005Z,1478861176.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:16.022Z,1478861176.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:16.393Z,1478861176.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:16.425Z,1478861176.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:16.793Z,1478861176.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:16.818Z,1478861176.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:17.226Z,1478861177.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:17.274Z,1478861177.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:17.601Z,1478861177.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:17.636Z,1478861177.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:17.998Z,1478861177.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:18.033Z,1478861178.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:18.397Z,1478861178.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:18.449Z,1478861178.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:18.797Z,1478861178.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:18.821Z,1478861178.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:19.218Z,1478861179.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:19.246Z,1478861179.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:19.602Z,1478861179.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:19.618Z,1478861179.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:23.036Z,1478861183.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:23.054Z,1478861183.054 [BPC1](ERROR): Failed to receive battery data
2016-11-11T10:46:23.054Z,1478861183.055 [BPC1] Communications Fault, FailCount= 1
2016-11-11T10:46:23.054Z,1478861183.055 [BPC1](ERROR): Communications Fault
2016-11-11T10:46:23.066Z,1478861183.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:23.087Z,1478861183.087 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T10:46:23.185Z,1478861183.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:23.213Z,1478861183.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:23.523Z,1478861183.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:23.546Z,1478861183.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:23.929Z,1478861183.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:23.946Z,1478861183.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:23.985Z,1478861183.985 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:46:23.985Z,1478861183.985 [BPC1] No Fault, FailCount= 1
2016-11-11T10:46:24.320Z,1478861184.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:24.405Z,1478861184.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:24.747Z,1478861184.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:24.791Z,1478861184.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:25.122Z,1478861185.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:25.160Z,1478861185.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:25.517Z,1478861185.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:25.533Z,1478861185.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:25.920Z,1478861185.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:25.937Z,1478861185.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:26.332Z,1478861186.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:26.366Z,1478861186.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:26.748Z,1478861186.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:26.805Z,1478861186.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:27.117Z,1478861187.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:27.142Z,1478861187.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:27.529Z,1478861187.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:27.544Z,1478861187.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:27.920Z,1478861187.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:27.974Z,1478861187.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:28.317Z,1478861188.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:28.349Z,1478861188.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:28.717Z,1478861188.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:28.750Z,1478861188.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:29.117Z,1478861189.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:29.149Z,1478861189.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:29.517Z,1478861189.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:29.551Z,1478861189.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:29.917Z,1478861189.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:29.952Z,1478861189.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:30.317Z,1478861190.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:30.343Z,1478861190.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:30.745Z,1478861190.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:30.765Z,1478861190.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:31.161Z,1478861191.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:31.212Z,1478861191.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:31.517Z,1478861191.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:31.543Z,1478861191.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:31.917Z,1478861191.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:31.953Z,1478861191.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:32.318Z,1478861192.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:32.349Z,1478861192.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:32.717Z,1478861192.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:32.753Z,1478861192.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:33.167Z,1478861193.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:33.217Z,1478861193.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:33.525Z,1478861193.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:33.540Z,1478861193.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:33.925Z,1478861193.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:33.952Z,1478861193.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:34.327Z,1478861194.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:34.342Z,1478861194.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:34.743Z,1478861194.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:34.785Z,1478861194.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:35.140Z,1478861195.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:35.162Z,1478861195.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:35.532Z,1478861195.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:35.562Z,1478861195.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:35.943Z,1478861195.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:35.980Z,1478861195.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:36.332Z,1478861196.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:36.367Z,1478861196.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:36.732Z,1478861196.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:36.786Z,1478861196.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:37.122Z,1478861197.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:37.137Z,1478861197.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:37.524Z,1478861197.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:37.540Z,1478861197.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:37.927Z,1478861197.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:37.941Z,1478861197.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:38.324Z,1478861198.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:38.339Z,1478861198.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:38.731Z,1478861198.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:38.777Z,1478861198.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:39.129Z,1478861199.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:39.152Z,1478861199.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:39.517Z,1478861199.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:39.553Z,1478861199.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:39.937Z,1478861199.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:39.971Z,1478861199.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:40.336Z,1478861200.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:40.351Z,1478861200.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:40.728Z,1478861200.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:40.779Z,1478861200.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:41.130Z,1478861201.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:41.158Z,1478861201.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:41.524Z,1478861201.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:41.539Z,1478861201.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:41.932Z,1478861201.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:41.940Z,1478861201.940 [BPC1](ERROR): Failed to receive battery data
2016-11-11T10:46:41.941Z,1478861201.941 [BPC1] Communications Fault, FailCount= 2
2016-11-11T10:46:41.941Z,1478861201.941 [BPC1](ERROR): Communications Fault
2016-11-11T10:46:41.949Z,1478861201.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:41.996Z,1478861201.996 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T10:46:42.325Z,1478861202.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:42.341Z,1478861202.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:42.734Z,1478861202.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:42.820Z,1478861202.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:43.128Z,1478861203.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:43.149Z,1478861203.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:43.169Z,1478861203.168 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:46:43.169Z,1478861203.169 [BPC1] No Fault, FailCount= 2
2016-11-11T10:46:43.517Z,1478861203.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:43.601Z,1478861203.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:43.917Z,1478861203.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:43.973Z,1478861203.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:44.318Z,1478861204.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:44.344Z,1478861204.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:44.717Z,1478861204.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:44.750Z,1478861204.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:45.171Z,1478861205.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:45.227Z,1478861205.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:45.522Z,1478861205.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:45.558Z,1478861205.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:45.917Z,1478861205.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:45.966Z,1478861205.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:46.320Z,1478861206.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:46.357Z,1478861206.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:46.721Z,1478861206.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:46.741Z,1478861206.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:47.168Z,1478861207.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:47.212Z,1478861207.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:47.525Z,1478861207.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:47.545Z,1478861207.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:47.936Z,1478861207.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:47.967Z,1478861207.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:48.333Z,1478861208.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:48.356Z,1478861208.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:48.733Z,1478861208.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:48.754Z,1478861208.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:49.136Z,1478861209.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:49.164Z,1478861209.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:49.532Z,1478861209.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:49.553Z,1478861209.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:49.917Z,1478861209.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:49.950Z,1478861209.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:50.322Z,1478861210.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:50.349Z,1478861210.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:50.736Z,1478861210.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:50.766Z,1478861210.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:51.122Z,1478861211.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:51.148Z,1478861211.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:51.526Z,1478861211.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:51.558Z,1478861211.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:51.918Z,1478861211.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:51.934Z,1478861211.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:52.317Z,1478861212.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:52.337Z,1478861212.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:52.724Z,1478861212.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:52.745Z,1478861212.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:53.121Z,1478861213.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:53.141Z,1478861213.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:53.527Z,1478861213.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:53.542Z,1478861213.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:53.921Z,1478861213.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:53.953Z,1478861213.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:54.321Z,1478861214.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:54.344Z,1478861214.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:54.726Z,1478861214.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:54.746Z,1478861214.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:55.117Z,1478861215.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:55.149Z,1478861215.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:55.517Z,1478861215.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:55.545Z,1478861215.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:55.917Z,1478861215.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:55.954Z,1478861215.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:56.318Z,1478861216.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:56.373Z,1478861216.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:56.717Z,1478861216.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:56.805Z,1478861216.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:57.121Z,1478861217.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:57.141Z,1478861217.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:57.532Z,1478861217.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:57.559Z,1478861217.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:57.924Z,1478861217.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:57.966Z,1478861217.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:58.326Z,1478861218.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:58.341Z,1478861218.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:58.724Z,1478861218.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:58.745Z,1478861218.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:59.158Z,1478861219.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:59.183Z,1478861219.183 [BPC1](ERROR): Failed to receive battery data
2016-11-11T10:46:59.183Z,1478861219.183 [BPC1] Communications Fault, FailCount= 3
2016-11-11T10:46:59.183Z,1478861219.183 [BPC1](ERROR): Communications Fault
2016-11-11T10:46:59.208Z,1478861219.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:59.250Z,1478861219.250 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T10:46:59.526Z,1478861219.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:59.556Z,1478861219.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:46:59.918Z,1478861219.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:46:59.957Z,1478861219.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:00.317Z,1478861220.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:00.349Z,1478861220.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:00.390Z,1478861220.390 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:47:00.390Z,1478861220.390 [BPC1] No Fault, FailCount= 3
2016-11-11T10:47:00.717Z,1478861220.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:00.805Z,1478861220.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:01.160Z,1478861221.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:01.218Z,1478861221.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:01.522Z,1478861221.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:01.550Z,1478861221.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:01.922Z,1478861221.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:01.943Z,1478861221.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:02.321Z,1478861222.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:02.336Z,1478861222.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:02.721Z,1478861222.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:02.741Z,1478861222.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:03.129Z,1478861223.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:03.145Z,1478861223.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:03.525Z,1478861223.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:03.540Z,1478861223.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:03.920Z,1478861223.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:03.971Z,1478861223.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:04.317Z,1478861224.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:04.350Z,1478861224.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:04.717Z,1478861224.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:04.753Z,1478861224.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:05.117Z,1478861225.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:05.143Z,1478861225.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:05.517Z,1478861225.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:05.553Z,1478861225.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:05.917Z,1478861225.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:05.957Z,1478861225.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:06.317Z,1478861226.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:06.349Z,1478861226.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:06.710Z,1478861226.710 [NAL9602](INFO): SBD MO Status=2, MOMSN=343, MT Status=2, MTMSN=0
2016-11-11T10:47:06.710Z,1478861226.710 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T10:47:06.727Z,1478861226.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:06.762Z,1478861226.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:07.140Z,1478861227.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:07.154Z,1478861227.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:07.517Z,1478861227.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:07.553Z,1478861227.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:07.917Z,1478861227.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:07.953Z,1478861227.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:08.322Z,1478861228.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:08.354Z,1478861228.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:08.729Z,1478861228.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:08.752Z,1478861228.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:09.117Z,1478861229.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:09.153Z,1478861229.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:09.517Z,1478861229.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:09.553Z,1478861229.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:09.918Z,1478861229.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:09.958Z,1478861229.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:10.324Z,1478861230.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:10.340Z,1478861230.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:10.772Z,1478861230.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:10.812Z,1478861230.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:11.136Z,1478861231.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:11.172Z,1478861231.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:11.527Z,1478861231.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:11.597Z,1478861231.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:11.926Z,1478861231.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:11.945Z,1478861231.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:12.320Z,1478861232.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:12.352Z,1478861232.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:12.717Z,1478861232.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:12.749Z,1478861232.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:13.133Z,1478861233.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:13.189Z,1478861233.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:13.523Z,1478861233.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:13.543Z,1478861233.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:13.920Z,1478861233.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:13.967Z,1478861233.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:14.329Z,1478861234.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:14.376Z,1478861234.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:14.732Z,1478861234.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:14.748Z,1478861234.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:15.147Z,1478861235.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:15.194Z,1478861235.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:15.231Z,1478861235.231 [CBIT](IMPORTANT): Beginning ground fault scan
2016-11-11T10:47:15.517Z,1478861235.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:15.549Z,1478861235.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:15.917Z,1478861235.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:15.942Z,1478861235.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:16.317Z,1478861236.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:16.354Z,1478861236.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:16.717Z,1478861236.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:16.732Z,1478861236.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:17.129Z,1478861237.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:17.149Z,1478861237.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:17.521Z,1478861237.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:17.553Z,1478861237.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:17.917Z,1478861237.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:17.946Z,1478861237.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:18.321Z,1478861238.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:18.357Z,1478861238.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:18.725Z,1478861238.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:18.757Z,1478861238.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:19.117Z,1478861239.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:19.132Z,1478861239.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:19.525Z,1478861239.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:19.561Z,1478861239.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:19.925Z,1478861239.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:19.940Z,1478861239.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:23.395Z,1478861243.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:23.433Z,1478861243.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:23.581Z,1478861243.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:23.625Z,1478861243.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:23.981Z,1478861243.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:24.001Z,1478861244.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:24.381Z,1478861244.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:24.401Z,1478861244.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:24.785Z,1478861244.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:24.800Z,1478861244.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:25.188Z,1478861245.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:25.250Z,1478861245.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:25.578Z,1478861245.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:25.609Z,1478861245.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:25.977Z,1478861245.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:26.010Z,1478861246.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:26.381Z,1478861246.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:26.413Z,1478861246.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:26.782Z,1478861246.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:26.837Z,1478861246.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:27.177Z,1478861247.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:27.193Z,1478861247.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:27.581Z,1478861247.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:27.634Z,1478861247.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:27.978Z,1478861247.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:27.993Z,1478861247.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:28.377Z,1478861248.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:28.429Z,1478861248.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:28.782Z,1478861248.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:28.829Z,1478861248.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:28.873Z,1478861248.873 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.025751
CHAN A1 (24V): -0.002548
CHAN A2 (12V): 0.011093
CHAN A3 (5V): 0.002430
CHAN B0 (3.3V): -0.000077
CHAN B1 (3.15aV): 0.000169
CHAN B2 (3.15bV): -0.000676
CHAN B3 (GND): -0.003784
OPEN: 0.003570
Full Scale Calc: 4.765 mA, -1.589 mA
2016-11-11T10:47:29.177Z,1478861249.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:29.204Z,1478861249.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:29.581Z,1478861249.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:29.617Z,1478861249.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:29.977Z,1478861249.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:30.009Z,1478861250.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:30.394Z,1478861250.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:30.410Z,1478861250.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:30.777Z,1478861250.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:30.812Z,1478861250.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:31.181Z,1478861251.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:31.213Z,1478861251.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:31.578Z,1478861251.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:31.621Z,1478861251.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:31.977Z,1478861251.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:32.009Z,1478861252.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:32.377Z,1478861252.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:32.411Z,1478861252.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:32.794Z,1478861252.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:32.810Z,1478861252.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:33.177Z,1478861253.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:33.213Z,1478861253.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:33.577Z,1478861253.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:33.609Z,1478861253.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:33.979Z,1478861253.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:34.010Z,1478861254.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:34.377Z,1478861254.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:34.410Z,1478861254.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:34.785Z,1478861254.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:34.811Z,1478861254.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:35.182Z,1478861255.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:35.221Z,1478861255.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:35.585Z,1478861255.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:35.612Z,1478861255.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:35.985Z,1478861255.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:36.014Z,1478861256.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:36.382Z,1478861256.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:36.418Z,1478861256.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:36.785Z,1478861256.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:36.818Z,1478861256.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:37.185Z,1478861257.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:37.213Z,1478861257.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:37.566Z,1478861257.566 [NAL9602](INFO): SBD MO Status=2, MOMSN=343, MT Status=2, MTMSN=0
2016-11-11T10:47:37.566Z,1478861257.566 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T10:47:37.584Z,1478861257.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:37.616Z,1478861257.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:37.988Z,1478861257.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:38.016Z,1478861258.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:38.382Z,1478861258.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:38.401Z,1478861258.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:38.778Z,1478861258.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:38.801Z,1478861258.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:39.185Z,1478861259.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:39.205Z,1478861259.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:39.584Z,1478861259.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:39.629Z,1478861259.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:39.981Z,1478861259.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:40.002Z,1478861260.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:40.379Z,1478861260.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:40.485Z,1478861260.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:40.778Z,1478861260.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:40.822Z,1478861260.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:41.188Z,1478861261.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:41.236Z,1478861261.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:41.588Z,1478861261.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:41.658Z,1478861261.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:42.001Z,1478861262.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:42.042Z,1478861262.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:42.404Z,1478861262.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:42.461Z,1478861262.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:42.780Z,1478861262.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:42.846Z,1478861262.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:43.183Z,1478861263.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:43.231Z,1478861263.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:43.590Z,1478861263.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:43.610Z,1478861263.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:43.982Z,1478861263.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:44.018Z,1478861264.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:44.379Z,1478861264.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:44.427Z,1478861264.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:44.795Z,1478861264.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:44.839Z,1478861264.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:45.187Z,1478861265.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:45.212Z,1478861265.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:45.578Z,1478861265.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:45.618Z,1478861265.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:45.979Z,1478861265.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:46.018Z,1478861266.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:46.379Z,1478861266.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:46.430Z,1478861266.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:46.785Z,1478861266.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:46.845Z,1478861266.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:47.179Z,1478861267.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:47.230Z,1478861267.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:47.562Z,1478861267.562 [NAL9602](INFO): SBD MO Status=0, MOMSN=343, MT Status=0, MTMSN=0
2016-11-11T10:47:47.562Z,1478861267.562 [NAL9602](INFO): No messages in MT queue
2016-11-11T10:47:47.581Z,1478861267.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:47.630Z,1478861267.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:47.979Z,1478861267.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:48.030Z,1478861268.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:48.392Z,1478861268.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:48.407Z,1478861268.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:48.813Z,1478861268.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:48.834Z,1478861268.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:49.196Z,1478861269.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:49.212Z,1478861269.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:49.604Z,1478861269.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:49.622Z,1478861269.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:49.978Z,1478861269.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:50.004Z,1478861270.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:50.385Z,1478861270.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:50.411Z,1478861270.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:50.820Z,1478861270.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:50.841Z,1478861270.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:51.200Z,1478861271.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:51.225Z,1478861271.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:51.600Z,1478861271.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:51.654Z,1478861271.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:51.998Z,1478861271.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:52.013Z,1478861272.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:52.384Z,1478861272.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:52.404Z,1478861272.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:52.777Z,1478861272.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:52.824Z,1478861272.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:53.238Z,1478861273.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:53.262Z,1478861273.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:53.595Z,1478861273.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:53.669Z,1478861273.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:53.998Z,1478861273.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:54.058Z,1478861274.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:54.387Z,1478861274.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:54.437Z,1478861274.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:54.787Z,1478861274.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:54.807Z,1478861274.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:55.188Z,1478861275.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:55.262Z,1478861275.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:55.579Z,1478861275.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:55.625Z,1478861275.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:55.996Z,1478861275.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:56.022Z,1478861276.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:56.402Z,1478861276.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:56.462Z,1478861276.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:56.790Z,1478861276.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:56.822Z,1478861276.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:57.177Z,1478861277.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:57.241Z,1478861277.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:57.588Z,1478861277.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:57.646Z,1478861277.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:57.984Z,1478861277.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:58.028Z,1478861278.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:58.378Z,1478861278.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:58.404Z,1478861278.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:58.777Z,1478861278.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:58.811Z,1478861278.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:59.200Z,1478861279.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:59.221Z,1478861279.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:59.596Z,1478861279.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:47:59.624Z,1478861279.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:47:59.996Z,1478861279.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:00.017Z,1478861280.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:00.377Z,1478861280.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:00.414Z,1478861280.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:00.785Z,1478861280.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:00.812Z,1478861280.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:01.186Z,1478861281.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:01.221Z,1478861281.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:01.578Z,1478861281.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:01.630Z,1478861281.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:01.993Z,1478861281.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:02.032Z,1478861282.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:02.405Z,1478861282.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:02.448Z,1478861282.448 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:02.448Z,1478861282.448 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100
2016-11-11T10:48:02.448Z,1478861282.448 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:48:02.519Z,1478861282.519 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:02.520Z,1478861282.520 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 100
2016-11-11T10:48:02.520Z,1478861282.520 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:48:02.545Z,1478861282.545 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:02.545Z,1478861282.546 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 100
2016-11-11T10:48:02.545Z,1478861282.546 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:48:02.622Z,1478861282.622 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:48:02.622Z,1478861282.622 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:48:02.622Z,1478861282.622 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:48:02.793Z,1478861282.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:02.870Z,1478861282.870 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:48:02.870Z,1478861282.870 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100
2016-11-11T10:48:02.871Z,1478861282.871 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:48:02.871Z,1478861282.871 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 100
2016-11-11T10:48:02.872Z,1478861282.872 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:48:02.872Z,1478861282.872 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 100
2016-11-11T10:48:03.198Z,1478861283.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:03.260Z,1478861283.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:48:03.261Z,1478861283.261 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:48:03.261Z,1478861283.261 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:48:03.274Z,1478861283.274 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:48:03.275Z,1478861283.275 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:48:03.307Z,1478861283.307 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:48:03.308Z,1478861283.308 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:48:03.308Z,1478861283.308 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:48:03.309Z,1478861283.309 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:48:03.586Z,1478861283.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:03.619Z,1478861283.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:03.979Z,1478861283.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:04.030Z,1478861284.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:04.380Z,1478861284.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:04.430Z,1478861284.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:04.780Z,1478861284.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:04.822Z,1478861284.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:05.198Z,1478861285.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:05.241Z,1478861285.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:05.598Z,1478861285.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:05.636Z,1478861285.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:05.998Z,1478861285.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:06.034Z,1478861286.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:06.385Z,1478861286.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:06.405Z,1478861286.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:06.786Z,1478861286.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:06.810Z,1478861286.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:07.189Z,1478861287.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:07.214Z,1478861287.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:07.613Z,1478861287.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:07.662Z,1478861287.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:07.989Z,1478861287.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:08.024Z,1478861288.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:08.393Z,1478861288.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:08.451Z,1478861288.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:08.789Z,1478861288.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:08.822Z,1478861288.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:09.179Z,1478861289.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:09.227Z,1478861289.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:09.583Z,1478861289.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:09.642Z,1478861289.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:09.979Z,1478861289.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:10.022Z,1478861290.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:10.379Z,1478861290.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:10.422Z,1478861290.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:10.778Z,1478861290.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:10.853Z,1478861290.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:11.194Z,1478861291.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:11.246Z,1478861291.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:11.594Z,1478861291.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:11.650Z,1478861291.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:11.991Z,1478861291.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:12.057Z,1478861292.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:12.377Z,1478861292.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:12.417Z,1478861292.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:12.778Z,1478861292.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:12.834Z,1478861292.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:13.182Z,1478861293.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:13.214Z,1478861293.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:13.582Z,1478861293.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:13.641Z,1478861293.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:13.997Z,1478861293.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:14.017Z,1478861294.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:14.399Z,1478861294.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:14.414Z,1478861294.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:14.795Z,1478861294.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:14.817Z,1478861294.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:15.177Z,1478861295.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:15.205Z,1478861295.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:15.577Z,1478861295.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:15.613Z,1478861295.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:15.982Z,1478861295.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:15.997Z,1478861295.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:16.385Z,1478861296.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:16.400Z,1478861296.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:16.789Z,1478861296.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:16.809Z,1478861296.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:17.192Z,1478861297.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:17.213Z,1478861297.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:17.592Z,1478861297.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:17.608Z,1478861297.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:17.988Z,1478861297.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:18.017Z,1478861298.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:18.387Z,1478861298.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:18.409Z,1478861298.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:18.777Z,1478861298.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:18.814Z,1478861298.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:19.187Z,1478861299.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:19.213Z,1478861299.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:19.578Z,1478861299.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:19.619Z,1478861299.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:19.993Z,1478861299.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:20.020Z,1478861300.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:23.660Z,1478861303.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:23.729Z,1478861303.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:23.833Z,1478861303.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:23.853Z,1478861303.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:24.224Z,1478861304.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:24.289Z,1478861304.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:24.609Z,1478861304.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:24.637Z,1478861304.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:25.036Z,1478861305.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:25.093Z,1478861305.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:25.415Z,1478861305.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:25.438Z,1478861305.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:25.839Z,1478861305.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:25.889Z,1478861305.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:26.228Z,1478861306.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:26.277Z,1478861306.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:26.628Z,1478861306.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:26.643Z,1478861306.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:27.010Z,1478861307.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:27.046Z,1478861307.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:27.410Z,1478861307.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:27.436Z,1478861307.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:27.821Z,1478861307.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:27.859Z,1478861307.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:28.210Z,1478861308.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:28.237Z,1478861308.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:28.625Z,1478861308.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:28.645Z,1478861308.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:29.028Z,1478861309.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:29.044Z,1478861309.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:29.432Z,1478861309.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:29.447Z,1478861309.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:29.832Z,1478861309.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:29.848Z,1478861309.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:30.213Z,1478861310.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:30.239Z,1478861310.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:30.618Z,1478861310.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:30.645Z,1478861310.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:31.015Z,1478861311.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:31.051Z,1478861311.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:31.409Z,1478861311.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:31.445Z,1478861311.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:31.832Z,1478861311.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:31.857Z,1478861311.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:32.232Z,1478861312.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:32.248Z,1478861312.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:32.635Z,1478861312.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:32.651Z,1478861312.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:33.009Z,1478861313.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:33.053Z,1478861313.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:33.409Z,1478861313.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:33.446Z,1478861313.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:33.817Z,1478861313.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:33.852Z,1478861313.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:34.211Z,1478861314.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:34.237Z,1478861314.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:34.636Z,1478861314.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:34.690Z,1478861314.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:35.030Z,1478861315.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:35.047Z,1478861315.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:35.431Z,1478861315.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:35.446Z,1478861315.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:35.824Z,1478861315.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:35.852Z,1478861315.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:36.213Z,1478861316.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:36.249Z,1478861316.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:36.609Z,1478861316.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:36.637Z,1478861316.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:37.011Z,1478861317.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:37.085Z,1478861317.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:37.426Z,1478861317.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:37.445Z,1478861317.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:37.831Z,1478861317.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:37.847Z,1478861317.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:38.231Z,1478861318.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:38.281Z,1478861318.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:38.632Z,1478861318.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:38.648Z,1478861318.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:39.011Z,1478861319.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:39.056Z,1478861319.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:39.418Z,1478861319.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:39.462Z,1478861319.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:39.817Z,1478861319.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:39.837Z,1478861319.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:40.214Z,1478861320.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:40.262Z,1478861320.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:40.618Z,1478861320.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:40.659Z,1478861320.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:41.032Z,1478861321.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:41.072Z,1478861321.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:41.424Z,1478861321.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:41.439Z,1478861321.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:41.823Z,1478861321.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:41.839Z,1478861321.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:42.213Z,1478861322.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:42.246Z,1478861322.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:42.626Z,1478861322.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:42.654Z,1478861322.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:43.010Z,1478861323.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:43.037Z,1478861323.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:43.420Z,1478861323.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:43.454Z,1478861323.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:43.834Z,1478861323.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:43.849Z,1478861323.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:44.231Z,1478861324.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:44.248Z,1478861324.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:44.637Z,1478861324.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:44.652Z,1478861324.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:45.009Z,1478861325.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:45.047Z,1478861325.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:45.409Z,1478861325.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:45.446Z,1478861325.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:45.813Z,1478861325.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:45.845Z,1478861325.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:46.210Z,1478861326.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:46.254Z,1478861326.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:46.617Z,1478861326.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:46.649Z,1478861326.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:47.020Z,1478861327.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:47.055Z,1478861327.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:47.424Z,1478861327.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:47.450Z,1478861327.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:47.824Z,1478861327.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:47.857Z,1478861327.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:48.213Z,1478861328.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:48.250Z,1478861328.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:48.617Z,1478861328.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:48.662Z,1478861328.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:49.018Z,1478861329.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:49.046Z,1478861329.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:49.414Z,1478861329.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:49.434Z,1478861329.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:49.824Z,1478861329.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:49.839Z,1478861329.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:50.224Z,1478861330.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:50.240Z,1478861330.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:50.622Z,1478861330.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:50.654Z,1478861330.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:51.010Z,1478861331.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:51.037Z,1478861331.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:51.425Z,1478861331.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:51.441Z,1478861331.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:51.825Z,1478861331.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:51.848Z,1478861331.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:52.210Z,1478861332.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:52.261Z,1478861332.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:52.609Z,1478861332.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:52.647Z,1478861332.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:53.045Z,1478861333.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:53.065Z,1478861333.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:53.432Z,1478861333.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:53.461Z,1478861333.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:53.828Z,1478861333.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:53.877Z,1478861333.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:54.221Z,1478861334.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:54.240Z,1478861334.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:54.618Z,1478861334.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:54.664Z,1478861334.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:55.013Z,1478861335.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:55.065Z,1478861335.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:55.420Z,1478861335.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:55.435Z,1478861335.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:55.824Z,1478861335.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:55.845Z,1478861335.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:56.224Z,1478861336.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:56.240Z,1478861336.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:56.628Z,1478861336.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:56.644Z,1478861336.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:57.018Z,1478861337.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:57.033Z,1478861337.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:57.413Z,1478861337.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:57.436Z,1478861337.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:57.820Z,1478861337.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:57.852Z,1478861337.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:58.210Z,1478861338.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:58.245Z,1478861338.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:58.622Z,1478861338.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:58.644Z,1478861338.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:59.024Z,1478861339.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:59.056Z,1478861339.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:59.438Z,1478861339.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:59.497Z,1478861339.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:48:59.824Z,1478861339.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:48:59.846Z,1478861339.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:00.213Z,1478861340.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:00.240Z,1478861340.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:00.627Z,1478861340.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:00.642Z,1478861340.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:01.011Z,1478861341.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:01.045Z,1478861341.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:01.413Z,1478861341.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:01.445Z,1478861341.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:01.832Z,1478861341.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:01.848Z,1478861341.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:02.235Z,1478861342.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:02.251Z,1478861342.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:02.637Z,1478861342.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:02.653Z,1478861342.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:03.018Z,1478861343.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:03.050Z,1478861343.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:03.409Z,1478861343.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:03.449Z,1478861343.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:03.809Z,1478861343.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:03.829Z,1478861343.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:04.214Z,1478861344.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:04.233Z,1478861344.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:04.618Z,1478861344.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:04.637Z,1478861344.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:05.032Z,1478861345.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:05.064Z,1478861345.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:05.424Z,1478861345.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:05.439Z,1478861345.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:05.822Z,1478861345.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:05.841Z,1478861345.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:06.212Z,1478861346.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:06.240Z,1478861346.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:06.613Z,1478861346.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:06.637Z,1478861346.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:07.010Z,1478861347.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:07.089Z,1478861347.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:07.425Z,1478861347.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:07.441Z,1478861347.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:07.828Z,1478861347.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:07.852Z,1478861347.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:08.231Z,1478861348.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:08.283Z,1478861348.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:08.636Z,1478861348.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:08.651Z,1478861348.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:09.009Z,1478861349.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:09.057Z,1478861349.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:09.409Z,1478861349.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:09.457Z,1478861349.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:09.809Z,1478861349.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:09.846Z,1478861349.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:10.210Z,1478861350.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:10.247Z,1478861350.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:10.633Z,1478861350.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:10.657Z,1478861350.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:11.021Z,1478861351.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:11.056Z,1478861351.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:11.424Z,1478861351.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:11.458Z,1478861351.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:11.820Z,1478861351.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:11.856Z,1478861351.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:12.213Z,1478861352.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:12.233Z,1478861352.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:12.621Z,1478861352.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:12.657Z,1478861352.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:13.013Z,1478861353.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:13.036Z,1478861353.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:13.412Z,1478861353.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:13.440Z,1478861353.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:13.831Z,1478861353.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:13.853Z,1478861353.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:14.228Z,1478861354.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:14.264Z,1478861354.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:14.634Z,1478861354.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:14.650Z,1478861354.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:15.009Z,1478861355.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:15.045Z,1478861355.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:15.410Z,1478861355.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:15.442Z,1478861355.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:15.810Z,1478861355.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:15.845Z,1478861355.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:16.210Z,1478861356.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:16.225Z,1478861356.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:16.627Z,1478861356.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:16.651Z,1478861356.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:17.032Z,1478861357.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:17.061Z,1478861357.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:17.428Z,1478861357.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:17.461Z,1478861357.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:17.820Z,1478861357.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:17.844Z,1478861357.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:18.218Z,1478861358.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:18.237Z,1478861358.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:18.613Z,1478861358.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:18.637Z,1478861358.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:19.016Z,1478861359.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:19.044Z,1478861359.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:19.413Z,1478861359.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:19.441Z,1478861359.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:19.831Z,1478861359.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:19.848Z,1478861359.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:20.226Z,1478861360.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:20.250Z,1478861360.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:23.677Z,1478861363.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:23.753Z,1478861363.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:23.841Z,1478861363.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:23.881Z,1478861363.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:24.249Z,1478861364.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:24.300Z,1478861364.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:24.654Z,1478861364.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:24.673Z,1478861364.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:25.049Z,1478861365.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:25.105Z,1478861365.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:25.449Z,1478861365.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:25.504Z,1478861365.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:25.857Z,1478861365.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:25.881Z,1478861365.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:26.264Z,1478861366.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:26.280Z,1478861366.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:26.667Z,1478861366.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:26.682Z,1478861366.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:27.041Z,1478861367.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:27.074Z,1478861367.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:27.445Z,1478861367.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:27.482Z,1478861367.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:27.847Z,1478861367.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:27.862Z,1478861367.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:28.243Z,1478861368.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:28.269Z,1478861368.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:28.654Z,1478861368.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:28.674Z,1478861368.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:29.061Z,1478861369.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:29.076Z,1478861369.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:29.463Z,1478861369.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:29.478Z,1478861369.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:29.856Z,1478861369.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:29.878Z,1478861369.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:30.241Z,1478861370.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:30.273Z,1478861370.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:30.662Z,1478861370.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:30.730Z,1478861370.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:31.042Z,1478861371.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:31.081Z,1478861371.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:31.441Z,1478861371.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:31.477Z,1478861371.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:31.864Z,1478861371.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:31.891Z,1478861371.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:32.264Z,1478861372.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:32.287Z,1478861372.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:32.656Z,1478861372.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:32.688Z,1478861372.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:33.046Z,1478861373.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:33.069Z,1478861373.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:33.444Z,1478861373.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:33.472Z,1478861373.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:33.844Z,1478861373.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:33.867Z,1478861373.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:34.244Z,1478861374.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:34.278Z,1478861374.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:34.641Z,1478861374.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:34.674Z,1478861374.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:35.058Z,1478861375.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:35.074Z,1478861375.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:35.463Z,1478861375.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:35.479Z,1478861375.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:35.860Z,1478861375.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:35.888Z,1478861375.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:36.245Z,1478861376.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:36.270Z,1478861376.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:36.641Z,1478861376.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:36.674Z,1478861376.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:37.042Z,1478861377.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:37.077Z,1478861377.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:37.441Z,1478861377.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:37.501Z,1478861377.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:37.856Z,1478861377.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:37.891Z,1478861377.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:38.256Z,1478861378.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:38.289Z,1478861378.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:38.661Z,1478861378.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:38.709Z,1478861378.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:39.049Z,1478861379.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:39.069Z,1478861379.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:39.444Z,1478861379.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:39.499Z,1478861379.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:39.841Z,1478861379.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:39.882Z,1478861379.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:40.242Z,1478861380.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:40.273Z,1478861380.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:40.641Z,1478861380.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:40.661Z,1478861380.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:41.056Z,1478861381.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:41.091Z,1478861381.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:41.456Z,1478861381.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:41.471Z,1478861381.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:41.853Z,1478861381.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:41.873Z,1478861381.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:42.248Z,1478861382.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:42.263Z,1478861382.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:42.657Z,1478861382.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:42.672Z,1478861382.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:43.044Z,1478861383.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:43.078Z,1478861383.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:43.448Z,1478861383.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:43.477Z,1478861383.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:43.867Z,1478861383.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:43.889Z,1478861383.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:44.263Z,1478861384.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:44.278Z,1478861384.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:44.667Z,1478861384.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:44.683Z,1478861384.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:45.041Z,1478861385.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:45.081Z,1478861385.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:45.445Z,1478861385.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:45.460Z,1478861385.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:45.848Z,1478861385.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:45.863Z,1478861385.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:46.254Z,1478861386.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:46.269Z,1478861386.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:46.644Z,1478861386.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:46.677Z,1478861386.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:47.058Z,1478861387.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:47.073Z,1478861387.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:47.462Z,1478861387.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:47.478Z,1478861387.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:47.856Z,1478861387.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:47.888Z,1478861387.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:48.241Z,1478861388.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:48.273Z,1478861388.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:48.650Z,1478861388.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:48.685Z,1478861388.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:49.042Z,1478861389.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:49.078Z,1478861389.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:49.441Z,1478861389.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:49.481Z,1478861389.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:49.860Z,1478861389.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:49.898Z,1478861389.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:50.260Z,1478861390.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:50.285Z,1478861390.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:50.664Z,1478861390.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:50.718Z,1478861390.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:51.050Z,1478861391.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:51.078Z,1478861391.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:51.444Z,1478861391.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:51.476Z,1478861391.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:51.849Z,1478861391.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:51.882Z,1478861391.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:52.255Z,1478861392.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:52.277Z,1478861392.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:52.641Z,1478861392.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:52.693Z,1478861392.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:53.056Z,1478861393.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:53.086Z,1478861393.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:53.460Z,1478861393.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:53.532Z,1478861393.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:53.852Z,1478861393.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:53.884Z,1478861393.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:54.241Z,1478861394.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:54.293Z,1478861394.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:54.653Z,1478861394.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:54.673Z,1478861394.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:55.046Z,1478861395.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:55.066Z,1478861395.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:55.448Z,1478861395.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:55.463Z,1478861395.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:55.860Z,1478861395.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:55.876Z,1478861395.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:56.260Z,1478861396.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:56.281Z,1478861396.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:56.669Z,1478861396.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:56.689Z,1478861396.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:57.046Z,1478861397.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:57.085Z,1478861397.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:57.441Z,1478861397.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:57.477Z,1478861397.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:57.845Z,1478861397.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:57.877Z,1478861397.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:58.242Z,1478861398.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:58.270Z,1478861398.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:58.641Z,1478861398.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:58.677Z,1478861398.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:59.060Z,1478861399.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:59.085Z,1478861399.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:59.460Z,1478861399.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:59.487Z,1478861399.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:49:59.856Z,1478861399.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:49:59.900Z,1478861399.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:00.250Z,1478861400.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:00.269Z,1478861400.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:00.646Z,1478861400.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:00.662Z,1478861400.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:01.054Z,1478861401.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:01.093Z,1478861401.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:01.444Z,1478861401.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:01.473Z,1478861401.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:01.865Z,1478861401.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:01.881Z,1478861401.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:02.265Z,1478861402.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:02.286Z,1478861402.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:02.665Z,1478861402.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:02.681Z,1478861402.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:03.041Z,1478861403.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:03.081Z,1478861403.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:03.442Z,1478861403.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:03.461Z,1478861403.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:03.842Z,1478861403.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:03.861Z,1478861403.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:04.245Z,1478861404.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:04.265Z,1478861404.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:04.656Z,1478861404.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:04.669Z,1478861404.669 [BPC1](ERROR): Failed to parse message.
2016-11-11T10:50:04.669Z,1478861404.669 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T10:50:04.669Z,1478861404.669 [BPC1] Data Fault, FailCount= 1
2016-11-11T10:50:04.669Z,1478861404.669 [BPC1](ERROR): Data Fault
2016-11-11T10:50:04.686Z,1478861404.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:04.737Z,1478861404.737 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T10:50:05.063Z,1478861405.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:05.087Z,1478861405.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:05.460Z,1478861405.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:05.492Z,1478861405.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:05.841Z,1478861405.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:05.857Z,1478861405.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:05.898Z,1478861405.898 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:50:05.898Z,1478861405.898 [BPC1] No Fault, FailCount= 1
2016-11-11T10:50:06.241Z,1478861406.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:06.393Z,1478861406.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:06.649Z,1478861406.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:06.704Z,1478861406.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:07.042Z,1478861407.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:07.074Z,1478861407.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:07.441Z,1478861407.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:07.473Z,1478861407.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:07.856Z,1478861407.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:07.879Z,1478861407.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:08.256Z,1478861408.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:08.288Z,1478861408.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:08.662Z,1478861408.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:08.685Z,1478861408.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:09.041Z,1478861409.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:09.073Z,1478861409.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:09.441Z,1478861409.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:09.477Z,1478861409.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:09.842Z,1478861409.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:09.876Z,1478861409.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:10.241Z,1478861410.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:10.276Z,1478861410.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:10.664Z,1478861410.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:10.680Z,1478861410.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:11.060Z,1478861411.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:11.075Z,1478861411.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:11.463Z,1478861411.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:11.485Z,1478861411.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:11.841Z,1478861411.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:11.867Z,1478861411.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:12.241Z,1478861412.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:12.275Z,1478861412.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:12.641Z,1478861412.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:12.673Z,1478861412.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:13.042Z,1478861413.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:13.068Z,1478861413.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:13.441Z,1478861413.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:13.466Z,1478861413.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:13.860Z,1478861413.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:13.881Z,1478861413.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:14.260Z,1478861414.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:14.290Z,1478861414.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:14.652Z,1478861414.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:14.687Z,1478861414.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:15.041Z,1478861415.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:15.078Z,1478861415.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:15.442Z,1478861415.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:15.477Z,1478861415.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:15.842Z,1478861415.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:15.877Z,1478861415.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:16.241Z,1478861416.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:16.277Z,1478861416.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:16.652Z,1478861416.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:16.690Z,1478861416.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:17.056Z,1478861417.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:17.083Z,1478861417.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:17.456Z,1478861417.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:17.514Z,1478861417.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:17.852Z,1478861417.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:17.868Z,1478861417.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:18.249Z,1478861418.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:18.269Z,1478861418.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:18.641Z,1478861418.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:18.686Z,1478861418.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:19.050Z,1478861419.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:19.085Z,1478861419.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:19.441Z,1478861419.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:19.478Z,1478861419.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:19.488Z,1478861419.488 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T10:45:19.2Z
2016-11-11T10:50:19.488Z,1478861419.488 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T10:50:19.488Z,1478861419.488 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T10:50:19.856Z,1478861419.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:19.924Z,1478861419.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:20.785Z,1478861420.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:20.800Z,1478861420.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:23.960Z,1478861423.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:24.031Z,1478861424.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:24.059Z,1478861424.059 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0140.lzma
2016-11-11T10:50:24.120Z,1478861424.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:24.149Z,1478861424.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:24.499Z,1478861424.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:24.551Z,1478861424.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:24.861Z,1478861424.861 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0140.lzma.bak
2016-11-11T10:50:24.861Z,1478861424.861 [DataOverHttps](INFO): SBD MOMSN=4555335
2016-11-11T10:50:24.898Z,1478861424.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:24.922Z,1478861424.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:26.367Z,1478861426.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:26.424Z,1478861426.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:26.540Z,1478861426.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:26.569Z,1478861426.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:29.879Z,1478861429.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:29.900Z,1478861429.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:29.997Z,1478861429.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:30.018Z,1478861430.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:30.396Z,1478861430.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:30.411Z,1478861430.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:30.838Z,1478861430.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:30.876Z,1478861430.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:31.193Z,1478861431.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:31.210Z,1478861431.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:31.580Z,1478861431.580 [NAL9602](INFO): Powering down
2016-11-11T10:50:31.600Z,1478861431.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:31.616Z,1478861431.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:35.217Z,1478861435.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:35.273Z,1478861435.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:35.353Z,1478861435.353 [DataOverHttps](INFO): Sending 354 bytes from file Logs/20161111T044527/Express0141.lzma
2016-11-11T10:50:35.389Z,1478861435.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:35.425Z,1478861435.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:35.753Z,1478861435.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:35.816Z,1478861435.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:36.133Z,1478861436.133 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0141.lzma.bak
2016-11-11T10:50:36.133Z,1478861436.133 [DataOverHttps](INFO): SBD MOMSN=4555337
2016-11-11T10:50:36.157Z,1478861436.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:36.329Z,1478861436.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:37.450Z,1478861437.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:37.466Z,1478861437.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:37.475Z,1478861437.475 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T10:50:37.475Z,1478861437.476 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T10:50:37.476Z,1478861437.476 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T10:50:37.562Z,1478861437.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:37.605Z,1478861437.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:40.982Z,1478861440.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:41.031Z,1478861441.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:41.118Z,1478861441.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:41.166Z,1478861441.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:41.493Z,1478861441.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:41.538Z,1478861441.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:41.893Z,1478861441.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:41.949Z,1478861441.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:42.293Z,1478861442.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:42.325Z,1478861442.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:42.693Z,1478861442.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:42.797Z,1478861442.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:43.093Z,1478861443.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:43.113Z,1478861443.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:43.497Z,1478861443.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:43.513Z,1478861443.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:43.899Z,1478861443.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:43.927Z,1478861443.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:44.301Z,1478861444.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:44.317Z,1478861444.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:44.701Z,1478861444.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:44.785Z,1478861444.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:45.093Z,1478861445.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:45.121Z,1478861445.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:45.493Z,1478861445.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:45.529Z,1478861445.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:45.893Z,1478861445.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:45.929Z,1478861445.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:46.297Z,1478861446.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:46.353Z,1478861446.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:46.693Z,1478861446.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:46.708Z,1478861446.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:47.101Z,1478861447.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:47.117Z,1478861447.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:47.497Z,1478861447.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:47.512Z,1478861447.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:47.899Z,1478861447.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:47.914Z,1478861447.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:48.306Z,1478861448.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:48.322Z,1478861448.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:48.699Z,1478861448.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:48.718Z,1478861448.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:49.100Z,1478861449.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:49.121Z,1478861449.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:49.508Z,1478861449.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:49.524Z,1478861449.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:49.911Z,1478861449.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:49.979Z,1478861449.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:50.312Z,1478861450.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:50.345Z,1478861450.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:50.693Z,1478861450.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:50.725Z,1478861450.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:51.097Z,1478861451.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:51.127Z,1478861451.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:51.493Z,1478861451.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:51.525Z,1478861451.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:51.901Z,1478861451.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:51.927Z,1478861451.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:52.299Z,1478861452.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:52.340Z,1478861452.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:52.693Z,1478861452.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:52.750Z,1478861452.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:53.093Z,1478861453.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:53.113Z,1478861453.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:53.501Z,1478861453.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:53.516Z,1478861453.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:53.900Z,1478861453.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:53.916Z,1478861453.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:54.300Z,1478861454.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:54.441Z,1478861454.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:54.693Z,1478861454.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:54.727Z,1478861454.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:55.093Z,1478861455.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:55.142Z,1478861455.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:55.493Z,1478861455.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:55.529Z,1478861455.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:55.893Z,1478861455.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:55.938Z,1478861455.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:56.293Z,1478861456.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:56.342Z,1478861456.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:56.706Z,1478861456.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:56.781Z,1478861456.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:57.098Z,1478861457.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:57.117Z,1478861457.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:57.493Z,1478861457.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:57.513Z,1478861457.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:57.893Z,1478861457.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:57.908Z,1478861457.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:58.298Z,1478861458.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:58.314Z,1478861458.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:58.724Z,1478861458.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:58.801Z,1478861458.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:59.099Z,1478861459.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:59.114Z,1478861459.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:59.500Z,1478861459.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:59.521Z,1478861459.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:50:59.899Z,1478861459.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:50:59.921Z,1478861459.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:00.303Z,1478861460.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:00.334Z,1478861460.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:00.709Z,1478861460.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:00.725Z,1478861460.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:01.093Z,1478861461.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:01.121Z,1478861461.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:01.493Z,1478861461.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:01.521Z,1478861461.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:01.893Z,1478861461.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:01.927Z,1478861461.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:02.308Z,1478861462.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:02.366Z,1478861462.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:02.693Z,1478861462.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:02.733Z,1478861462.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:03.096Z,1478861463.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:03.117Z,1478861463.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:03.506Z,1478861463.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:03.521Z,1478861463.521 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:03.521Z,1478861463.521 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 101
2016-11-11T10:51:03.521Z,1478861463.521 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:51:03.548Z,1478861463.548 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:03.548Z,1478861463.548 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 101
2016-11-11T10:51:03.548Z,1478861463.548 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:51:03.550Z,1478861463.550 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:03.550Z,1478861463.550 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 101
2016-11-11T10:51:03.550Z,1478861463.550 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:51:03.564Z,1478861463.564 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:51:03.565Z,1478861463.565 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:51:03.565Z,1478861463.565 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:51:03.907Z,1478861463.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:03.959Z,1478861463.959 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:51:03.960Z,1478861463.960 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 101
2016-11-11T10:51:03.960Z,1478861463.960 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:51:03.960Z,1478861463.960 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 101
2016-11-11T10:51:03.961Z,1478861463.961 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:51:03.961Z,1478861463.961 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 101
2016-11-11T10:51:04.309Z,1478861464.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:04.323Z,1478861464.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:51:04.328Z,1478861464.328 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:51:04.328Z,1478861464.328 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:51:04.341Z,1478861464.341 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:51:04.341Z,1478861464.341 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:51:04.342Z,1478861464.342 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:51:04.342Z,1478861464.342 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:51:04.343Z,1478861464.343 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:51:04.351Z,1478861464.351 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:51:04.698Z,1478861464.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:04.729Z,1478861464.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:05.093Z,1478861465.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:05.125Z,1478861465.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:05.515Z,1478861465.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:05.542Z,1478861465.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:05.893Z,1478861465.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:06.003Z,1478861466.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:06.299Z,1478861466.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:06.340Z,1478861466.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:06.697Z,1478861466.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:06.749Z,1478861466.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:07.100Z,1478861467.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:07.116Z,1478861467.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:07.500Z,1478861467.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:07.525Z,1478861467.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:07.900Z,1478861467.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:07.940Z,1478861467.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:08.292Z,1478861468.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:08.414Z,1478861468.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:08.697Z,1478861468.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:08.734Z,1478861468.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:09.093Z,1478861469.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:09.149Z,1478861469.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:09.493Z,1478861469.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:09.536Z,1478861469.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:09.540Z,1478861469.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:09.897Z,1478861469.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:09.949Z,1478861469.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:10.293Z,1478861470.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:10.336Z,1478861470.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:10.353Z,1478861470.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:10.701Z,1478861470.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:10.749Z,1478861470.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:11.105Z,1478861471.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:11.120Z,1478861471.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:11.504Z,1478861471.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:11.525Z,1478861471.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:11.893Z,1478861471.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:11.925Z,1478861471.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:12.293Z,1478861472.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:12.319Z,1478861472.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:12.708Z,1478861472.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:12.753Z,1478861472.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:13.093Z,1478861473.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:13.141Z,1478861473.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:13.493Z,1478861473.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:13.513Z,1478861473.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:13.893Z,1478861473.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:13.913Z,1478861473.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:14.296Z,1478861474.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:14.311Z,1478861474.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:14.701Z,1478861474.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:14.716Z,1478861474.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:15.101Z,1478861475.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:15.116Z,1478861475.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:15.500Z,1478861475.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:15.521Z,1478861475.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:15.896Z,1478861475.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:15.914Z,1478861475.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:16.300Z,1478861476.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:16.315Z,1478861476.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:16.693Z,1478861476.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:16.727Z,1478861476.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:17.104Z,1478861477.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:17.125Z,1478861477.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:17.500Z,1478861477.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:17.531Z,1478861477.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:17.904Z,1478861477.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:17.919Z,1478861477.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:18.293Z,1478861478.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:18.319Z,1478861478.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:18.697Z,1478861478.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:18.729Z,1478861478.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:19.093Z,1478861479.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:19.120Z,1478861479.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:19.508Z,1478861479.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:19.530Z,1478861479.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:19.893Z,1478861479.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:19.929Z,1478861479.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:20.293Z,1478861480.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:20.344Z,1478861480.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:20.698Z,1478861480.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:20.730Z,1478861480.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:21.094Z,1478861481.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:21.156Z,1478861481.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:21.494Z,1478861481.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:21.502Z,1478861481.502 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T10:51:21.503Z,1478861481.503 [BPC1] Data Fault, FailCount= 1
2016-11-11T10:51:21.503Z,1478861481.503 [BPC1](ERROR): Data Fault
2016-11-11T10:51:21.529Z,1478861481.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:21.571Z,1478861481.571 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T10:51:21.901Z,1478861481.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:21.925Z,1478861481.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:22.360Z,1478861482.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:22.404Z,1478861482.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:22.693Z,1478861482.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:22.726Z,1478861482.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:22.746Z,1478861482.746 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:51:22.746Z,1478861482.746 [BPC1] No Fault, FailCount= 1
2016-11-11T10:51:23.093Z,1478861483.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:23.177Z,1478861483.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:23.493Z,1478861483.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:23.544Z,1478861483.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:23.550Z,1478861483.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:23.893Z,1478861483.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:23.931Z,1478861483.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:24.293Z,1478861484.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:24.330Z,1478861484.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:24.340Z,1478861484.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:24.739Z,1478861484.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:24.782Z,1478861484.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:25.093Z,1478861485.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:25.129Z,1478861485.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:25.498Z,1478861485.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:25.529Z,1478861485.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:25.901Z,1478861485.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:25.916Z,1478861485.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:26.296Z,1478861486.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:26.327Z,1478861486.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:26.720Z,1478861486.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:26.756Z,1478861486.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:27.093Z,1478861487.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:27.129Z,1478861487.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:27.496Z,1478861487.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:27.517Z,1478861487.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:27.896Z,1478861487.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:27.913Z,1478861487.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:28.293Z,1478861488.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:28.313Z,1478861488.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:28.699Z,1478861488.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:28.715Z,1478861488.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:29.100Z,1478861489.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:29.115Z,1478861489.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:29.504Z,1478861489.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:29.519Z,1478861489.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:29.900Z,1478861489.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:29.915Z,1478861489.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:30.308Z,1478861490.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:30.324Z,1478861490.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:30.693Z,1478861490.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:30.725Z,1478861490.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:31.093Z,1478861491.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:31.125Z,1478861491.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:31.493Z,1478861491.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:31.525Z,1478861491.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:31.893Z,1478861491.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:31.925Z,1478861491.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:32.312Z,1478861492.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:32.328Z,1478861492.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:32.693Z,1478861492.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:32.719Z,1478861492.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:33.093Z,1478861493.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:33.125Z,1478861493.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:33.493Z,1478861493.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:33.525Z,1478861493.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:33.893Z,1478861493.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:33.921Z,1478861493.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:34.293Z,1478861494.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:34.329Z,1478861494.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:34.693Z,1478861494.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:34.757Z,1478861494.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:35.099Z,1478861495.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:35.114Z,1478861495.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:35.500Z,1478861495.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:35.561Z,1478861495.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:35.901Z,1478861495.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:35.916Z,1478861495.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:36.315Z,1478861496.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:36.385Z,1478861496.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:36.700Z,1478861496.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:36.722Z,1478861496.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:37.093Z,1478861497.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:37.142Z,1478861497.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:37.493Z,1478861497.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:37.546Z,1478861497.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:37.913Z,1478861497.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:37.933Z,1478861497.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:41.346Z,1478861501.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:41.406Z,1478861501.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:41.501Z,1478861501.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:41.538Z,1478861501.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:41.897Z,1478861501.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:41.940Z,1478861501.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:42.297Z,1478861502.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:42.312Z,1478861502.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:42.701Z,1478861502.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:42.716Z,1478861502.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:43.099Z,1478861503.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:43.121Z,1478861503.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:43.500Z,1478861503.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:43.515Z,1478861503.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:43.896Z,1478861503.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:43.924Z,1478861503.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:44.308Z,1478861504.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:44.329Z,1478861504.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:44.704Z,1478861504.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:44.719Z,1478861504.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:45.096Z,1478861505.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:45.119Z,1478861505.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:45.501Z,1478861505.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:45.521Z,1478861505.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:45.896Z,1478861505.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:45.927Z,1478861505.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:46.308Z,1478861506.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:46.324Z,1478861506.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:46.708Z,1478861506.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:46.723Z,1478861506.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:47.093Z,1478861507.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:47.127Z,1478861507.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:47.501Z,1478861507.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:47.534Z,1478861507.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:47.893Z,1478861507.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:47.925Z,1478861507.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:48.301Z,1478861508.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:48.327Z,1478861508.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:48.693Z,1478861508.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:48.750Z,1478861508.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:49.093Z,1478861509.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:49.129Z,1478861509.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:49.493Z,1478861509.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:49.529Z,1478861509.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:49.893Z,1478861509.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:49.953Z,1478861509.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:50.308Z,1478861510.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:50.357Z,1478861510.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:50.693Z,1478861510.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:50.721Z,1478861510.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:51.096Z,1478861511.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:51.144Z,1478861511.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:51.500Z,1478861511.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:51.515Z,1478861511.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:51.899Z,1478861511.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:51.938Z,1478861511.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:52.300Z,1478861512.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:52.352Z,1478861512.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:52.700Z,1478861512.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:52.736Z,1478861512.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:53.101Z,1478861513.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:53.127Z,1478861513.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:53.493Z,1478861513.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:53.525Z,1478861513.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:53.897Z,1478861513.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:53.922Z,1478861513.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:54.293Z,1478861514.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:54.333Z,1478861514.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:54.695Z,1478861514.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:54.740Z,1478861514.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:55.093Z,1478861515.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:55.129Z,1478861515.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:55.500Z,1478861515.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:55.515Z,1478861515.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:55.902Z,1478861515.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:55.930Z,1478861515.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:56.300Z,1478861516.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:56.321Z,1478861516.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:56.696Z,1478861516.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:56.729Z,1478861516.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:57.097Z,1478861517.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:57.129Z,1478861517.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:57.501Z,1478861517.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:57.521Z,1478861517.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:57.894Z,1478861517.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:57.979Z,1478861517.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:58.309Z,1478861518.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:58.329Z,1478861518.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:58.697Z,1478861518.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:58.733Z,1478861518.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:59.093Z,1478861519.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:59.128Z,1478861519.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:59.493Z,1478861519.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:59.525Z,1478861519.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:51:59.893Z,1478861519.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:51:59.930Z,1478861519.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:00.305Z,1478861520.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:00.337Z,1478861520.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:00.693Z,1478861520.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:00.725Z,1478861520.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:01.093Z,1478861521.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:01.137Z,1478861521.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:01.493Z,1478861521.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:01.539Z,1478861521.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:01.893Z,1478861521.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:01.929Z,1478861521.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:02.293Z,1478861522.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:02.313Z,1478861522.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:02.693Z,1478861522.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:02.713Z,1478861522.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:03.100Z,1478861523.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:03.116Z,1478861523.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:03.504Z,1478861523.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:03.519Z,1478861523.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:03.899Z,1478861523.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:03.921Z,1478861523.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:04.309Z,1478861524.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:04.355Z,1478861524.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:04.693Z,1478861524.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:04.725Z,1478861524.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:05.093Z,1478861525.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:05.142Z,1478861525.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:05.493Z,1478861525.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:05.529Z,1478861525.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:05.893Z,1478861525.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:05.942Z,1478861525.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:06.293Z,1478861526.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:06.345Z,1478861526.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:06.693Z,1478861526.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:06.716Z,1478861526.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:07.093Z,1478861527.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:07.129Z,1478861527.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:07.498Z,1478861527.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:07.513Z,1478861527.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:07.897Z,1478861527.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:07.912Z,1478861527.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:08.301Z,1478861528.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:08.316Z,1478861528.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:08.699Z,1478861528.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:08.726Z,1478861528.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:09.100Z,1478861529.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:09.116Z,1478861529.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:09.504Z,1478861529.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:09.520Z,1478861529.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:09.901Z,1478861529.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:09.916Z,1478861529.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:10.300Z,1478861530.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:10.324Z,1478861530.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:10.693Z,1478861530.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:10.718Z,1478861530.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:11.093Z,1478861531.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:11.121Z,1478861531.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:11.493Z,1478861531.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:11.525Z,1478861531.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:11.893Z,1478861531.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:11.927Z,1478861531.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:12.293Z,1478861532.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:12.325Z,1478861532.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:12.693Z,1478861532.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:12.725Z,1478861532.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:13.093Z,1478861533.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:13.125Z,1478861533.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:13.493Z,1478861533.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:13.525Z,1478861533.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:13.893Z,1478861533.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:13.925Z,1478861533.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:14.301Z,1478861534.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:14.327Z,1478861534.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:14.693Z,1478861534.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:14.725Z,1478861534.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:15.093Z,1478861535.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:15.125Z,1478861535.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:15.497Z,1478861535.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:15.529Z,1478861535.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:15.893Z,1478861535.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:15.929Z,1478861535.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:16.301Z,1478861536.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:16.326Z,1478861536.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:16.693Z,1478861536.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:16.729Z,1478861536.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:17.093Z,1478861537.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:17.129Z,1478861537.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:17.493Z,1478861537.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:17.529Z,1478861537.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:17.897Z,1478861537.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:17.929Z,1478861537.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:18.292Z,1478861538.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:18.377Z,1478861538.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:18.693Z,1478861538.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:18.717Z,1478861538.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:19.104Z,1478861539.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:19.125Z,1478861539.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:19.501Z,1478861539.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:19.558Z,1478861539.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:19.893Z,1478861539.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:19.927Z,1478861539.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:20.304Z,1478861540.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:20.351Z,1478861540.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:20.693Z,1478861540.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:20.754Z,1478861540.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:21.093Z,1478861541.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:21.119Z,1478861541.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:21.500Z,1478861541.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:21.523Z,1478861541.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:21.900Z,1478861541.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:21.923Z,1478861541.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:22.293Z,1478861542.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:22.328Z,1478861542.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:22.708Z,1478861542.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:22.724Z,1478861542.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:23.100Z,1478861543.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:23.123Z,1478861543.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:23.493Z,1478861543.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:23.525Z,1478861543.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:23.900Z,1478861543.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:23.923Z,1478861543.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:24.293Z,1478861544.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:24.326Z,1478861544.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:24.700Z,1478861544.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:24.723Z,1478861544.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:25.100Z,1478861545.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:25.123Z,1478861545.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:25.493Z,1478861545.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:25.526Z,1478861545.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:25.893Z,1478861545.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:25.939Z,1478861545.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:26.313Z,1478861546.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:26.341Z,1478861546.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:26.693Z,1478861546.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:26.708Z,1478861546.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:27.096Z,1478861547.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:27.112Z,1478861547.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:27.496Z,1478861547.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:27.521Z,1478861547.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:27.897Z,1478861547.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:27.921Z,1478861547.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:28.308Z,1478861548.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:28.324Z,1478861548.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:28.700Z,1478861548.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:28.723Z,1478861548.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:29.093Z,1478861549.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:29.118Z,1478861549.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:29.493Z,1478861549.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:29.518Z,1478861549.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:29.908Z,1478861549.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:29.929Z,1478861549.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:30.308Z,1478861550.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:30.330Z,1478861550.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:30.693Z,1478861550.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:30.725Z,1478861550.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:31.109Z,1478861551.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:31.125Z,1478861551.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:31.493Z,1478861551.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:31.525Z,1478861551.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:31.893Z,1478861551.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:31.933Z,1478861551.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:32.293Z,1478861552.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:32.313Z,1478861552.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:32.693Z,1478861552.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:32.769Z,1478861552.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:33.108Z,1478861553.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:33.124Z,1478861553.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:33.493Z,1478861553.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:33.549Z,1478861553.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:33.900Z,1478861553.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:33.915Z,1478861553.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:34.304Z,1478861554.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:34.350Z,1478861554.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:34.700Z,1478861554.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:34.721Z,1478861554.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:35.101Z,1478861555.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:35.158Z,1478861555.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:35.500Z,1478861555.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:35.516Z,1478861555.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:35.900Z,1478861555.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:35.929Z,1478861555.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:36.293Z,1478861556.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:36.327Z,1478861556.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:36.693Z,1478861556.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:36.720Z,1478861556.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:37.095Z,1478861557.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:37.136Z,1478861557.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:37.495Z,1478861557.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:37.542Z,1478861557.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:37.895Z,1478861557.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:37.932Z,1478861557.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:45.380Z,1478861565.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:45.428Z,1478861565.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:45.571Z,1478861565.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:45.610Z,1478861565.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:45.944Z,1478861565.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:45.978Z,1478861565.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:46.353Z,1478861566.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:46.369Z,1478861566.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:46.735Z,1478861566.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:46.797Z,1478861566.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:47.165Z,1478861567.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:47.198Z,1478861567.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:47.540Z,1478861567.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:47.555Z,1478861567.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:47.939Z,1478861567.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:47.993Z,1478861567.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:48.345Z,1478861568.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:48.365Z,1478861568.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:48.735Z,1478861568.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:48.786Z,1478861568.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:49.146Z,1478861569.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:49.193Z,1478861569.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:49.543Z,1478861569.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:49.596Z,1478861569.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:49.939Z,1478861569.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:49.961Z,1478861569.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:50.340Z,1478861570.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:50.360Z,1478861570.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:50.733Z,1478861570.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:50.765Z,1478861570.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:51.154Z,1478861571.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:51.205Z,1478861571.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:51.535Z,1478861571.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:51.574Z,1478861571.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:51.933Z,1478861571.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:51.965Z,1478861571.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:52.335Z,1478861572.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:52.373Z,1478861572.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:52.742Z,1478861572.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:52.773Z,1478861572.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:53.135Z,1478861573.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:53.181Z,1478861573.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:53.535Z,1478861573.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:53.585Z,1478861573.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:53.935Z,1478861573.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:53.974Z,1478861573.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:54.342Z,1478861574.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:54.419Z,1478861574.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:54.742Z,1478861574.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:54.769Z,1478861574.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:55.135Z,1478861575.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:55.164Z,1478861575.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:55.543Z,1478861575.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:55.590Z,1478861575.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:55.934Z,1478861575.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:55.965Z,1478861575.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:56.342Z,1478861576.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:56.362Z,1478861576.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:56.735Z,1478861576.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:56.772Z,1478861576.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:57.135Z,1478861577.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:57.181Z,1478861577.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:57.535Z,1478861577.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:57.554Z,1478861577.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:57.935Z,1478861577.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:57.986Z,1478861577.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:58.343Z,1478861578.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:58.386Z,1478861578.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:58.735Z,1478861578.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:58.775Z,1478861578.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:59.135Z,1478861579.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:59.198Z,1478861579.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:59.542Z,1478861579.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:59.594Z,1478861579.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:52:59.947Z,1478861579.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:52:59.975Z,1478861579.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:00.336Z,1478861580.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:00.377Z,1478861580.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:00.735Z,1478861580.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:00.774Z,1478861580.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:01.135Z,1478861581.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:01.234Z,1478861581.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:01.546Z,1478861581.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:01.598Z,1478861581.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:01.936Z,1478861581.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:01.951Z,1478861581.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:02.341Z,1478861582.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:02.395Z,1478861582.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:02.740Z,1478861582.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:02.761Z,1478861582.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:03.158Z,1478861583.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:03.206Z,1478861583.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:03.541Z,1478861583.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:03.595Z,1478861583.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:03.948Z,1478861583.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:03.963Z,1478861583.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:04.340Z,1478861584.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:04.393Z,1478861584.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:04.740Z,1478861584.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:04.777Z,1478861584.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:05.133Z,1478861585.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:05.165Z,1478861585.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:05.533Z,1478861585.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:05.570Z,1478861585.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:05.933Z,1478861585.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:05.966Z,1478861585.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:06.341Z,1478861586.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:06.370Z,1478861586.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:06.739Z,1478861586.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:06.754Z,1478861586.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:07.133Z,1478861587.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:07.148Z,1478861587.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:07.536Z,1478861587.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:07.561Z,1478861587.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:07.940Z,1478861587.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:07.987Z,1478861587.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:08.333Z,1478861588.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:08.370Z,1478861588.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:08.733Z,1478861588.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:08.765Z,1478861588.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:09.133Z,1478861589.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:09.148Z,1478861589.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:09.533Z,1478861589.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:09.553Z,1478861589.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:09.937Z,1478861589.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:09.957Z,1478861589.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:10.333Z,1478861590.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:10.369Z,1478861590.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:10.733Z,1478861590.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:10.777Z,1478861590.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:11.133Z,1478861591.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:11.173Z,1478861591.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:11.533Z,1478861591.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:11.553Z,1478861591.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:11.938Z,1478861591.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:11.953Z,1478861591.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:12.338Z,1478861592.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:12.361Z,1478861592.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:12.739Z,1478861592.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:12.761Z,1478861592.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:13.144Z,1478861593.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:13.160Z,1478861593.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:13.548Z,1478861593.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:13.564Z,1478861593.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:13.936Z,1478861593.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:13.965Z,1478861593.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:14.333Z,1478861594.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:14.361Z,1478861594.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:14.733Z,1478861594.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:14.765Z,1478861594.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:15.133Z,1478861595.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:15.169Z,1478861595.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:15.533Z,1478861595.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:15.595Z,1478861595.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:15.951Z,1478861595.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:16.045Z,1478861596.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:16.360Z,1478861596.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:16.376Z,1478861596.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:16.751Z,1478861596.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:16.775Z,1478861596.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:17.092Z,1478861597.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:17.134Z,1478861597.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:17.195Z,1478861597.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:17.504Z,1478861597.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:17.548Z,1478861597.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:17.576Z,1478861597.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:17.934Z,1478861597.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:17.981Z,1478861597.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:18.334Z,1478861598.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:18.361Z,1478861598.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:18.733Z,1478861598.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:18.786Z,1478861598.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:19.133Z,1478861599.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:19.149Z,1478861599.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:19.533Z,1478861599.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:19.550Z,1478861599.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:19.950Z,1478861599.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:20.051Z,1478861600.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:20.340Z,1478861600.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:20.356Z,1478861600.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:20.740Z,1478861600.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:20.756Z,1478861600.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:21.149Z,1478861601.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:21.165Z,1478861601.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:21.545Z,1478861601.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:21.570Z,1478861601.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:21.933Z,1478861601.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:21.965Z,1478861601.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:22.333Z,1478861602.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:22.377Z,1478861602.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:22.733Z,1478861602.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:22.748Z,1478861602.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:23.133Z,1478861603.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:23.153Z,1478861603.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:23.537Z,1478861603.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:23.552Z,1478861603.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:23.939Z,1478861603.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:23.955Z,1478861603.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:24.345Z,1478861604.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:24.365Z,1478861604.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:24.740Z,1478861604.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:24.761Z,1478861604.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:25.140Z,1478861605.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:25.156Z,1478861605.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:25.541Z,1478861605.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:25.561Z,1478861605.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:25.945Z,1478861605.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:25.965Z,1478861605.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:26.333Z,1478861606.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:26.349Z,1478861606.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:26.733Z,1478861606.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:26.753Z,1478861606.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:27.137Z,1478861607.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:27.157Z,1478861607.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:27.539Z,1478861607.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:27.555Z,1478861607.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:27.941Z,1478861607.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:27.961Z,1478861607.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:28.340Z,1478861608.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:28.365Z,1478861608.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:28.741Z,1478861608.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:28.757Z,1478861608.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:29.149Z,1478861609.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:29.164Z,1478861609.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:29.308Z,1478861609.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:29.549Z,1478861609.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:29.564Z,1478861609.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:29.933Z,1478861609.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:29.975Z,1478861609.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:30.104Z,1478861610.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:30.333Z,1478861610.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:30.366Z,1478861610.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:30.733Z,1478861610.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:30.825Z,1478861610.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:31.133Z,1478861611.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:31.153Z,1478861611.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:31.533Z,1478861611.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:31.585Z,1478861611.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:31.941Z,1478861611.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:31.961Z,1478861611.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:32.339Z,1478861612.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:32.386Z,1478861612.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:32.733Z,1478861612.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:32.803Z,1478861612.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:33.154Z,1478861613.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:33.175Z,1478861613.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:33.533Z,1478861613.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:33.569Z,1478861613.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:33.937Z,1478861613.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:34.021Z,1478861614.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:34.340Z,1478861614.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:34.357Z,1478861614.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:34.741Z,1478861614.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:34.761Z,1478861614.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:35.133Z,1478861615.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:35.167Z,1478861615.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:35.533Z,1478861615.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:35.568Z,1478861615.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:35.933Z,1478861615.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:36.000Z,1478861616.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:36.333Z,1478861616.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:36.376Z,1478861616.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:36.758Z,1478861616.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:36.779Z,1478861616.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:37.133Z,1478861617.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:37.166Z,1478861617.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:37.537Z,1478861617.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:37.583Z,1478861617.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:37.939Z,1478861617.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:38.003Z,1478861618.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:41.368Z,1478861621.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:41.397Z,1478861621.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:41.506Z,1478861621.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:41.547Z,1478861621.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:41.856Z,1478861621.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:41.877Z,1478861621.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:42.260Z,1478861622.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:42.276Z,1478861622.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:42.655Z,1478861622.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:42.671Z,1478861622.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:43.056Z,1478861623.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:43.071Z,1478861623.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:43.456Z,1478861623.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:43.470Z,1478861623.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:43.852Z,1478861623.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:43.880Z,1478861623.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:44.249Z,1478861624.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:44.285Z,1478861624.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:44.649Z,1478861624.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:44.717Z,1478861624.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:45.053Z,1478861625.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:45.113Z,1478861625.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:45.449Z,1478861625.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:45.493Z,1478861625.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:45.849Z,1478861625.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:45.903Z,1478861625.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:46.253Z,1478861626.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:46.289Z,1478861626.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:46.649Z,1478861626.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:46.701Z,1478861626.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:47.052Z,1478861627.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:47.091Z,1478861627.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:47.449Z,1478861627.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:47.473Z,1478861627.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:47.854Z,1478861627.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:47.882Z,1478861627.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:48.264Z,1478861628.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:48.284Z,1478861628.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:48.657Z,1478861628.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:48.677Z,1478861628.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:49.056Z,1478861629.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:49.071Z,1478861629.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:49.457Z,1478861629.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:49.477Z,1478861629.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:49.858Z,1478861629.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:49.874Z,1478861629.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:50.249Z,1478861630.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:50.269Z,1478861630.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:50.649Z,1478861630.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:50.666Z,1478861630.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:51.049Z,1478861631.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:51.073Z,1478861631.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:51.452Z,1478861631.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:51.474Z,1478861631.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:51.855Z,1478861631.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:51.870Z,1478861631.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:52.249Z,1478861632.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:52.285Z,1478861632.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:52.652Z,1478861632.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:52.673Z,1478861632.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:53.052Z,1478861633.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:53.073Z,1478861633.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:53.456Z,1478861633.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:53.472Z,1478861633.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:53.856Z,1478861633.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:53.877Z,1478861633.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:54.249Z,1478861634.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:54.285Z,1478861634.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:54.649Z,1478861634.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:54.686Z,1478861634.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:55.053Z,1478861635.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:55.089Z,1478861635.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:55.449Z,1478861635.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:55.469Z,1478861635.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:55.852Z,1478861635.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:55.868Z,1478861635.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:56.261Z,1478861636.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:56.276Z,1478861636.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:56.652Z,1478861636.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:56.680Z,1478861636.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:57.056Z,1478861637.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:57.072Z,1478861637.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:57.455Z,1478861637.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:57.485Z,1478861637.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:57.849Z,1478861637.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:57.874Z,1478861637.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:58.260Z,1478861638.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:58.294Z,1478861638.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:58.657Z,1478861638.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:58.689Z,1478861638.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:59.049Z,1478861639.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:59.086Z,1478861639.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:59.449Z,1478861639.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:59.502Z,1478861639.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:53:59.857Z,1478861639.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:53:59.872Z,1478861639.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:00.255Z,1478861640.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:00.313Z,1478861640.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:00.656Z,1478861640.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:00.671Z,1478861640.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:01.059Z,1478861641.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:01.115Z,1478861641.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:01.456Z,1478861641.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:01.510Z,1478861641.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:01.856Z,1478861641.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:01.871Z,1478861641.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:02.264Z,1478861642.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:02.285Z,1478861642.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:02.649Z,1478861642.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:02.681Z,1478861642.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:03.049Z,1478861643.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:03.080Z,1478861643.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:03.449Z,1478861643.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:03.484Z,1478861643.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:03.849Z,1478861643.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:03.885Z,1478861643.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:04.249Z,1478861644.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:04.269Z,1478861644.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:04.649Z,1478861644.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:04.669Z,1478861644.669 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:04.669Z,1478861644.669 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 102
2016-11-11T10:54:04.669Z,1478861644.669 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:54:04.705Z,1478861644.704 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:04.705Z,1478861644.705 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 102
2016-11-11T10:54:04.705Z,1478861644.705 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:54:04.707Z,1478861644.707 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:04.707Z,1478861644.707 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 102
2016-11-11T10:54:04.707Z,1478861644.707 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:54:04.744Z,1478861644.744 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:54:04.744Z,1478861644.744 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:54:04.745Z,1478861644.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:54:05.056Z,1478861645.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:05.115Z,1478861645.115 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:54:05.115Z,1478861645.115 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 102
2016-11-11T10:54:05.115Z,1478861645.115 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:54:05.116Z,1478861645.115 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 102
2016-11-11T10:54:05.116Z,1478861645.116 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:54:05.116Z,1478861645.116 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 102
2016-11-11T10:54:05.455Z,1478861645.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:05.469Z,1478861645.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:54:05.469Z,1478861645.469 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:54:05.470Z,1478861645.470 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:54:05.474Z,1478861645.474 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:54:05.475Z,1478861645.475 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:54:05.475Z,1478861645.476 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:54:05.476Z,1478861645.476 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:54:05.476Z,1478861645.476 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:54:05.477Z,1478861645.477 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:54:05.857Z,1478861645.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:05.877Z,1478861645.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:06.249Z,1478861646.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:06.284Z,1478861646.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:06.654Z,1478861646.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:06.669Z,1478861646.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:07.056Z,1478861647.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:07.077Z,1478861647.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:07.456Z,1478861647.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:07.471Z,1478861647.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:07.849Z,1478861647.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:07.881Z,1478861647.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:08.253Z,1478861648.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:08.278Z,1478861648.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:08.649Z,1478861648.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:08.684Z,1478861648.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:09.049Z,1478861649.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:09.081Z,1478861649.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:09.449Z,1478861649.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:09.481Z,1478861649.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:09.849Z,1478861649.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:09.880Z,1478861649.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:10.257Z,1478861650.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:10.283Z,1478861650.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:10.657Z,1478861650.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:10.693Z,1478861650.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:11.049Z,1478861651.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:11.069Z,1478861651.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:11.449Z,1478861651.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:11.473Z,1478861651.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:11.856Z,1478861651.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:11.872Z,1478861651.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:12.256Z,1478861652.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:12.271Z,1478861652.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:12.649Z,1478861652.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:12.674Z,1478861652.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:13.053Z,1478861653.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:13.085Z,1478861653.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:13.449Z,1478861653.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:13.530Z,1478861653.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:13.849Z,1478861653.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:13.885Z,1478861653.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:14.249Z,1478861654.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:14.269Z,1478861654.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:14.655Z,1478861654.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:14.709Z,1478861654.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:15.055Z,1478861655.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:15.070Z,1478861655.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:15.457Z,1478861655.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:15.516Z,1478861655.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:15.855Z,1478861655.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:15.972Z,1478861655.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:16.256Z,1478861656.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:16.272Z,1478861656.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:16.656Z,1478861656.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:16.679Z,1478861656.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:17.049Z,1478861657.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:17.081Z,1478861657.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:17.449Z,1478861657.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:17.481Z,1478861657.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:17.853Z,1478861657.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:17.917Z,1478861657.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:18.256Z,1478861658.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:18.277Z,1478861658.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:18.656Z,1478861658.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:18.671Z,1478861658.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:19.049Z,1478861659.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:19.081Z,1478861659.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:19.449Z,1478861659.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:19.487Z,1478861659.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:19.849Z,1478861659.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:19.881Z,1478861659.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:20.253Z,1478861660.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:20.268Z,1478861660.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:20.655Z,1478861660.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:20.677Z,1478861660.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:21.056Z,1478861661.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:21.072Z,1478861661.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:21.464Z,1478861661.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:21.480Z,1478861661.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:21.849Z,1478861661.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:21.883Z,1478861661.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:22.249Z,1478861662.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:22.287Z,1478861662.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:22.649Z,1478861662.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:22.678Z,1478861662.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:23.054Z,1478861663.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:23.084Z,1478861663.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:23.454Z,1478861663.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:23.469Z,1478861663.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:23.853Z,1478861663.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:23.873Z,1478861663.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:24.256Z,1478861664.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:24.281Z,1478861664.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:24.657Z,1478861664.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:24.673Z,1478861664.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:25.051Z,1478861665.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:25.084Z,1478861665.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:25.449Z,1478861665.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:25.484Z,1478861665.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:25.853Z,1478861665.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:25.894Z,1478861665.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:26.253Z,1478861666.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:26.289Z,1478861666.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:26.655Z,1478861666.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:26.670Z,1478861666.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:27.052Z,1478861667.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:27.077Z,1478861667.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:27.461Z,1478861667.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:27.480Z,1478861667.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:27.849Z,1478861667.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:27.953Z,1478861667.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:28.258Z,1478861668.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:28.274Z,1478861668.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:28.652Z,1478861668.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:28.706Z,1478861668.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:29.061Z,1478861669.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:29.085Z,1478861669.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:29.449Z,1478861669.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:29.514Z,1478861669.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:29.849Z,1478861669.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:29.941Z,1478861669.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:30.249Z,1478861670.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:30.290Z,1478861670.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:30.649Z,1478861670.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:30.680Z,1478861670.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:31.049Z,1478861671.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:31.086Z,1478861671.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:31.449Z,1478861671.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:31.490Z,1478861671.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:31.849Z,1478861671.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:31.909Z,1478861671.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:32.254Z,1478861672.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:32.273Z,1478861672.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:32.656Z,1478861672.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:32.671Z,1478861672.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:33.055Z,1478861673.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:33.070Z,1478861673.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:33.456Z,1478861673.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:33.479Z,1478861673.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:33.857Z,1478861673.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:33.930Z,1478861673.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:34.249Z,1478861674.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:34.293Z,1478861674.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:34.649Z,1478861674.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:34.674Z,1478861674.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:35.049Z,1478861675.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:35.085Z,1478861675.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:35.449Z,1478861675.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:35.485Z,1478861675.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:35.849Z,1478861675.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:35.924Z,1478861675.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:36.249Z,1478861676.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:36.289Z,1478861676.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:36.649Z,1478861676.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:36.668Z,1478861676.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:37.049Z,1478861677.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:37.073Z,1478861677.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:37.455Z,1478861677.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:37.470Z,1478861677.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:37.852Z,1478861677.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:37.878Z,1478861677.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:38.256Z,1478861678.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:38.275Z,1478861678.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:41.816Z,1478861681.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:41.831Z,1478861681.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:41.934Z,1478861681.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:41.954Z,1478861681.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:42.333Z,1478861682.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:42.463Z,1478861682.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:42.726Z,1478861682.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:42.761Z,1478861682.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:43.105Z,1478861683.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:43.163Z,1478861683.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:43.522Z,1478861683.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:43.537Z,1478861683.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:43.928Z,1478861683.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:43.985Z,1478861683.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:44.336Z,1478861684.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:44.405Z,1478861684.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:44.713Z,1478861684.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:44.741Z,1478861684.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:45.107Z,1478861685.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:45.137Z,1478861685.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:45.516Z,1478861685.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:45.544Z,1478861685.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:45.920Z,1478861685.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:45.978Z,1478861685.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:46.309Z,1478861686.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:46.343Z,1478861686.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:46.707Z,1478861686.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:46.743Z,1478861686.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:47.107Z,1478861687.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:47.141Z,1478861687.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:47.506Z,1478861687.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:47.541Z,1478861687.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:47.922Z,1478861687.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:47.982Z,1478861687.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:48.307Z,1478861688.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:48.341Z,1478861688.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:48.706Z,1478861688.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:48.741Z,1478861688.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:49.107Z,1478861689.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:49.135Z,1478861689.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:49.507Z,1478861689.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:49.541Z,1478861689.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:49.915Z,1478861689.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:49.972Z,1478861689.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:50.307Z,1478861690.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:50.341Z,1478861690.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:50.714Z,1478861690.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:50.729Z,1478861690.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:51.113Z,1478861691.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:51.141Z,1478861691.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:51.510Z,1478861691.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:51.546Z,1478861691.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:51.907Z,1478861691.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:51.933Z,1478861691.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:52.307Z,1478861692.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:52.342Z,1478861692.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:52.711Z,1478861692.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:52.747Z,1478861692.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:53.107Z,1478861693.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:53.145Z,1478861693.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:53.507Z,1478861693.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:53.546Z,1478861693.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:53.911Z,1478861693.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:53.939Z,1478861693.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:54.317Z,1478861694.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:54.394Z,1478861694.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:54.714Z,1478861694.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:54.729Z,1478861694.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:55.114Z,1478861695.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:55.130Z,1478861695.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:55.534Z,1478861695.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:55.558Z,1478861695.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:55.920Z,1478861695.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:55.964Z,1478861695.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:56.335Z,1478861696.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:56.450Z,1478861696.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:56.721Z,1478861696.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:56.744Z,1478861696.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:57.108Z,1478861697.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:57.145Z,1478861697.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:57.512Z,1478861697.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:57.581Z,1478861697.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:57.912Z,1478861697.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:57.939Z,1478861697.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:58.307Z,1478861698.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:58.354Z,1478861698.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:58.715Z,1478861698.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:58.773Z,1478861698.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:59.115Z,1478861699.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:59.149Z,1478861699.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:59.535Z,1478861699.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:59.566Z,1478861699.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:54:59.913Z,1478861699.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:54:59.949Z,1478861699.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:00.323Z,1478861700.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:00.338Z,1478861700.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:00.725Z,1478861700.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:00.740Z,1478861700.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:01.138Z,1478861701.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:01.170Z,1478861701.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:01.522Z,1478861701.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:01.538Z,1478861701.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:01.926Z,1478861701.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:01.978Z,1478861701.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:02.311Z,1478861702.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:02.339Z,1478861702.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:02.707Z,1478861702.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:02.735Z,1478861702.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:03.109Z,1478861703.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:03.149Z,1478861703.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:03.512Z,1478861703.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:03.532Z,1478861703.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:03.930Z,1478861703.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:03.968Z,1478861703.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:04.314Z,1478861704.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:04.330Z,1478861704.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:04.715Z,1478861704.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:04.730Z,1478861704.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:05.117Z,1478861705.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:05.145Z,1478861705.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:05.507Z,1478861705.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:05.540Z,1478861705.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:05.908Z,1478861705.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:05.993Z,1478861705.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:06.319Z,1478861706.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:06.335Z,1478861706.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:06.714Z,1478861706.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:06.729Z,1478861706.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:07.112Z,1478861707.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:07.136Z,1478861707.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:07.517Z,1478861707.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:07.538Z,1478861707.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:07.915Z,1478861707.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:07.945Z,1478861707.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:08.356Z,1478861708.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:08.404Z,1478861708.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:08.711Z,1478861708.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:08.728Z,1478861708.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:09.115Z,1478861709.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:09.157Z,1478861709.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:09.521Z,1478861709.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:09.536Z,1478861709.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:09.914Z,1478861709.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:09.941Z,1478861709.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:10.336Z,1478861710.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:10.403Z,1478861710.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:10.707Z,1478861710.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:10.761Z,1478861710.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:11.107Z,1478861711.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:11.123Z,1478861711.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:11.508Z,1478861711.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:11.554Z,1478861711.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:11.913Z,1478861711.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:11.941Z,1478861711.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:12.358Z,1478861712.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:12.413Z,1478861712.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:12.722Z,1478861712.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:12.763Z,1478861712.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:13.113Z,1478861713.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:13.159Z,1478861713.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:13.516Z,1478861713.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:13.537Z,1478861713.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:13.918Z,1478861713.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:13.961Z,1478861713.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:14.320Z,1478861714.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:14.337Z,1478861714.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:14.706Z,1478861714.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:14.742Z,1478861714.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:15.107Z,1478861715.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:15.142Z,1478861715.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:15.521Z,1478861715.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:15.537Z,1478861715.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:15.923Z,1478861715.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:15.956Z,1478861715.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:16.340Z,1478861716.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:16.389Z,1478861716.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:16.706Z,1478861716.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:16.721Z,1478861716.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:17.114Z,1478861717.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:17.156Z,1478861717.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:17.518Z,1478861717.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:17.553Z,1478861717.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:17.950Z,1478861717.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:17.970Z,1478861717.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:18.316Z,1478861718.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:18.352Z,1478861718.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:18.712Z,1478861718.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:18.728Z,1478861718.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:19.116Z,1478861719.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:19.143Z,1478861719.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:19.514Z,1478861719.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:19.529Z,1478861719.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:19.940Z,1478861719.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:20.000Z,1478861720.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:20.307Z,1478861720.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:20.322Z,1478861720.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:20.714Z,1478861720.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:20.730Z,1478861720.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:21.112Z,1478861721.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:21.141Z,1478861721.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:21.519Z,1478861721.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:21.534Z,1478861721.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:21.907Z,1478861721.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:21.942Z,1478861721.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:22.329Z,1478861722.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:22.387Z,1478861722.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:22.707Z,1478861722.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:22.743Z,1478861722.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:23.107Z,1478861723.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:23.141Z,1478861723.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:23.507Z,1478861723.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:23.537Z,1478861723.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:23.907Z,1478861723.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:23.942Z,1478861723.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:24.335Z,1478861724.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:24.377Z,1478861724.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:24.715Z,1478861724.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:24.752Z,1478861724.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:25.107Z,1478861725.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:25.158Z,1478861725.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:25.507Z,1478861725.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:25.562Z,1478861725.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:25.914Z,1478861725.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:25.929Z,1478861725.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:26.319Z,1478861726.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:26.335Z,1478861726.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:26.714Z,1478861726.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:26.771Z,1478861726.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:27.115Z,1478861727.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:27.130Z,1478861727.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:27.514Z,1478861727.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:27.571Z,1478861727.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:27.914Z,1478861727.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:27.971Z,1478861727.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:28.314Z,1478861728.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:28.333Z,1478861728.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:28.717Z,1478861728.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:28.733Z,1478861728.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:29.125Z,1478861729.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:29.173Z,1478861729.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:29.516Z,1478861729.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:29.550Z,1478861729.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:29.918Z,1478861729.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:29.942Z,1478861729.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:30.308Z,1478861730.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:30.345Z,1478861730.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:30.712Z,1478861730.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:30.745Z,1478861730.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:31.107Z,1478861731.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:31.122Z,1478861731.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:31.507Z,1478861731.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:31.553Z,1478861731.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:31.915Z,1478861731.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:31.941Z,1478861731.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:32.315Z,1478861732.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:32.331Z,1478861732.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:32.740Z,1478861732.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:32.789Z,1478861732.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:33.105Z,1478861733.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:33.149Z,1478861733.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:33.514Z,1478861733.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:33.546Z,1478861733.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:33.986Z,1478861733.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:34.029Z,1478861734.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:34.336Z,1478861734.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:34.364Z,1478861734.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:34.713Z,1478861734.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:34.737Z,1478861734.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:35.115Z,1478861735.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:35.137Z,1478861735.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:35.520Z,1478861735.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:35.540Z,1478861735.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:35.915Z,1478861735.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:35.930Z,1478861735.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:36.323Z,1478861736.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:36.366Z,1478861736.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:36.711Z,1478861736.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:36.738Z,1478861736.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:37.107Z,1478861737.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:37.138Z,1478861737.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:37.511Z,1478861737.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:37.538Z,1478861737.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:37.907Z,1478861737.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:37.941Z,1478861737.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:37.951Z,1478861737.951 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T10:55:37.951Z,1478861737.951 [Default:CheckIn:C.Wait] Stopped
2016-11-11T10:55:37.951Z,1478861737.951 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T10:55:37.951Z,1478861737.951 [Default:CheckIn:D] Running Loop=1
2016-11-11T10:55:38.334Z,1478861738.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:38.374Z,1478861738.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:38.396Z,1478861738.396 [Default:CheckIn:D] Stopped
2016-11-11T10:55:38.396Z,1478861738.396 [Default:CheckIn:E] Running Loop=1
2016-11-11T10:55:41.650Z,1478861741.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:41.733Z,1478861741.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:41.755Z,1478861741.755 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 365.618099 min 
2016-11-11T10:55:41.755Z,1478861741.755 [Default:CheckIn:E] Stopped
2016-11-11T10:55:41.755Z,1478861741.755 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T10:55:41.755Z,1478861741.755 [Default:CheckIn] Stopped
2016-11-11T10:55:41.755Z,1478861741.755 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T10:55:41.756Z,1478861741.756 [Default:CheckIn](INFO): Running loop #36
2016-11-11T10:55:41.756Z,1478861741.756 [Default:CheckIn] Running Loop=36
2016-11-11T10:55:41.756Z,1478861741.756 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T10:55:41.756Z,1478861741.756 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T10:55:41.905Z,1478861741.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:41.928Z,1478861741.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:42.260Z,1478861742.260 [NAL9602](INFO): Powering up
2016-11-11T10:55:42.284Z,1478861742.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:42.309Z,1478861742.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:42.677Z,1478861742.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:42.742Z,1478861742.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:43.077Z,1478861743.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:43.109Z,1478861743.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:43.477Z,1478861743.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:43.526Z,1478861743.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:43.877Z,1478861743.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:43.929Z,1478861743.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:44.277Z,1478861744.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:44.316Z,1478861744.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:44.676Z,1478861744.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:44.715Z,1478861744.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:45.081Z,1478861745.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:45.113Z,1478861745.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:45.477Z,1478861745.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:45.541Z,1478861745.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:45.892Z,1478861745.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:45.942Z,1478861745.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:46.277Z,1478861746.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:46.317Z,1478861746.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:46.678Z,1478861746.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:46.709Z,1478861746.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:47.082Z,1478861747.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:47.116Z,1478861747.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:47.477Z,1478861747.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:47.513Z,1478861747.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:47.919Z,1478861747.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:47.965Z,1478861747.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:48.285Z,1478861748.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:48.331Z,1478861748.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:48.681Z,1478861748.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:48.719Z,1478861748.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:49.085Z,1478861749.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:49.133Z,1478861749.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:49.484Z,1478861749.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:49.501Z,1478861749.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:49.885Z,1478861749.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:49.911Z,1478861749.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:50.324Z,1478861750.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:50.364Z,1478861750.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:50.678Z,1478861750.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:50.729Z,1478861750.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:51.089Z,1478861751.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:51.115Z,1478861751.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:51.480Z,1478861751.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:51.513Z,1478861751.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:51.881Z,1478861751.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:51.917Z,1478861751.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:52.300Z,1478861752.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:52.339Z,1478861752.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:52.689Z,1478861752.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:52.729Z,1478861752.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:53.061Z,1478861753.061 [NAL9602](INFO): NAL9602 initialized
2016-11-11T10:55:53.078Z,1478861753.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:53.114Z,1478861753.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:53.478Z,1478861753.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:53.515Z,1478861753.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:53.861Z,1478861753.861 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T10:55:53.861Z,1478861753.861 [NAL9602] Data Fault, FailCount= 1
2016-11-11T10:55:53.861Z,1478861753.861 [NAL9602](ERROR): Data Fault
2016-11-11T10:55:53.879Z,1478861753.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:53.894Z,1478861753.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:53.946Z,1478861753.946 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T10:55:54.268Z,1478861754.268 [NAL9602](INFO): Powering down
2016-11-11T10:55:54.286Z,1478861754.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:54.303Z,1478861754.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:54.683Z,1478861754.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:54.703Z,1478861754.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:54.751Z,1478861754.750 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T10:55:55.083Z,1478861755.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:55.101Z,1478861755.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:55.141Z,1478861755.141 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T10:55:55.141Z,1478861755.141 [NAL9602] No Fault, FailCount= 1
2016-11-11T10:55:55.487Z,1478861755.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:55.534Z,1478861755.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:55.877Z,1478861755.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:55.953Z,1478861755.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:56.277Z,1478861756.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:56.313Z,1478861756.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:56.677Z,1478861756.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:56.729Z,1478861756.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:57.077Z,1478861757.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:57.112Z,1478861757.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:57.477Z,1478861757.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:57.525Z,1478861757.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:57.885Z,1478861757.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:57.914Z,1478861757.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:58.277Z,1478861758.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:58.326Z,1478861758.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:58.677Z,1478861758.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:58.717Z,1478861758.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:59.080Z,1478861759.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:59.098Z,1478861759.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:59.464Z,1478861759.464 [NAL9602](INFO): Powering up NAL9602
2016-11-11T10:55:59.481Z,1478861759.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:59.503Z,1478861759.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:55:59.889Z,1478861759.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:55:59.907Z,1478861759.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:00.284Z,1478861760.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:00.303Z,1478861760.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:00.684Z,1478861760.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:00.701Z,1478861760.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:01.088Z,1478861761.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:01.106Z,1478861761.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:01.492Z,1478861761.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:01.517Z,1478861761.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:01.937Z,1478861761.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:01.980Z,1478861761.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:02.284Z,1478861762.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:02.313Z,1478861762.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:02.348Z,1478861762.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:02.688Z,1478861762.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:02.709Z,1478861762.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:03.084Z,1478861763.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:03.122Z,1478861763.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:03.144Z,1478861763.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:03.484Z,1478861763.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:03.517Z,1478861763.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:03.877Z,1478861763.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:03.917Z,1478861763.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:04.279Z,1478861764.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:04.324Z,1478861764.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:04.677Z,1478861764.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:04.713Z,1478861764.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:05.077Z,1478861765.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:05.119Z,1478861765.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:05.477Z,1478861765.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:05.521Z,1478861765.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:05.877Z,1478861765.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:05.933Z,1478861765.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:06.301Z,1478861766.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:06.333Z,1478861766.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:06.684Z,1478861766.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:06.709Z,1478861766.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:07.084Z,1478861767.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:07.113Z,1478861767.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:07.477Z,1478861767.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:07.526Z,1478861767.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:07.877Z,1478861767.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:07.918Z,1478861767.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:08.277Z,1478861768.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:08.309Z,1478861768.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:08.677Z,1478861768.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:08.714Z,1478861768.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:09.077Z,1478861769.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:09.116Z,1478861769.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:09.477Z,1478861769.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:09.518Z,1478861769.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:09.885Z,1478861769.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:09.920Z,1478861769.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:10.288Z,1478861770.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:10.350Z,1478861770.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:10.665Z,1478861770.665 [NAL9602](INFO): NAL9602 initialized
2016-11-11T10:56:10.681Z,1478861770.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:10.724Z,1478861770.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:11.077Z,1478861771.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:11.124Z,1478861771.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:11.488Z,1478861771.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:11.545Z,1478861771.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:11.892Z,1478861771.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:11.925Z,1478861771.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:12.292Z,1478861772.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:12.342Z,1478861772.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:12.681Z,1478861772.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:12.698Z,1478861772.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:13.078Z,1478861773.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:13.129Z,1478861773.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:13.491Z,1478861773.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:13.517Z,1478861773.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:13.902Z,1478861773.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:13.933Z,1478861773.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:14.292Z,1478861774.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:14.310Z,1478861774.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:14.686Z,1478861774.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:14.702Z,1478861774.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:15.080Z,1478861775.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:15.108Z,1478861775.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:15.488Z,1478861775.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:15.506Z,1478861775.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:15.913Z,1478861775.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:15.954Z,1478861775.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:16.277Z,1478861776.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:16.317Z,1478861776.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:16.677Z,1478861776.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:16.709Z,1478861776.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:17.085Z,1478861777.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:17.120Z,1478861777.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:17.481Z,1478861777.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:17.524Z,1478861777.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:17.882Z,1478861777.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:17.900Z,1478861777.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:18.309Z,1478861778.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:18.331Z,1478861778.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:18.717Z,1478861778.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:18.749Z,1478861778.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:19.089Z,1478861779.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:19.140Z,1478861779.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:19.484Z,1478861779.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:19.525Z,1478861779.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:19.892Z,1478861779.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:19.912Z,1478861779.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:20.290Z,1478861780.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:20.322Z,1478861780.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:20.680Z,1478861780.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:20.714Z,1478861780.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:21.085Z,1478861781.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:21.122Z,1478861781.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:21.477Z,1478861781.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:21.522Z,1478861781.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:21.885Z,1478861781.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:21.929Z,1478861781.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:22.281Z,1478861782.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:22.349Z,1478861782.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:22.678Z,1478861782.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:22.698Z,1478861782.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:23.081Z,1478861783.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:23.113Z,1478861783.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:23.490Z,1478861783.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:23.558Z,1478861783.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:23.892Z,1478861783.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:23.949Z,1478861783.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:24.285Z,1478861784.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:24.323Z,1478861784.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:24.677Z,1478861784.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:24.713Z,1478861784.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:25.078Z,1478861785.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:25.145Z,1478861785.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:25.478Z,1478861785.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:25.517Z,1478861785.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:25.887Z,1478861785.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:25.951Z,1478861785.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:26.278Z,1478861786.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:26.305Z,1478861786.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:26.678Z,1478861786.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:26.722Z,1478861786.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:27.077Z,1478861787.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:27.123Z,1478861787.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:27.477Z,1478861787.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:27.493Z,1478861787.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:27.894Z,1478861787.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:27.924Z,1478861787.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:28.311Z,1478861788.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:28.326Z,1478861788.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:28.677Z,1478861788.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:28.700Z,1478861788.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:29.085Z,1478861789.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:29.103Z,1478861789.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:29.483Z,1478861789.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:29.501Z,1478861789.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:29.898Z,1478861789.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:29.937Z,1478861789.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:30.289Z,1478861790.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:30.307Z,1478861790.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:30.680Z,1478861790.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:30.713Z,1478861790.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:31.086Z,1478861791.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:31.104Z,1478861791.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:31.486Z,1478861791.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:31.503Z,1478861791.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:31.888Z,1478861791.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:31.906Z,1478861791.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:32.277Z,1478861792.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:32.305Z,1478861792.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:32.689Z,1478861792.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:32.707Z,1478861792.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:33.077Z,1478861793.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:33.109Z,1478861793.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:33.477Z,1478861793.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:33.513Z,1478861793.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:33.878Z,1478861793.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:33.905Z,1478861793.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:34.278Z,1478861794.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:34.313Z,1478861794.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:34.682Z,1478861794.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:34.720Z,1478861794.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:35.081Z,1478861795.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:35.168Z,1478861795.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:35.484Z,1478861795.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:35.530Z,1478861795.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:35.885Z,1478861795.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:35.904Z,1478861795.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:36.280Z,1478861796.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:36.312Z,1478861796.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:36.680Z,1478861796.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:36.717Z,1478861796.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:37.077Z,1478861797.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:37.113Z,1478861797.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:37.478Z,1478861797.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:37.517Z,1478861797.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:37.885Z,1478861797.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:37.950Z,1478861797.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:38.262Z,1478861798.262 [NAL9602](INFO): SBD MO Status=2, MOMSN=344, MT Status=2, MTMSN=0
2016-11-11T10:56:38.262Z,1478861798.262 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T10:56:38.279Z,1478861798.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:38.319Z,1478861798.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:38.692Z,1478861798.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:38.737Z,1478861798.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:42.275Z,1478861802.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:42.322Z,1478861802.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:42.419Z,1478861802.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:42.457Z,1478861802.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:42.820Z,1478861802.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:42.835Z,1478861802.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:43.201Z,1478861803.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:43.233Z,1478861803.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:43.601Z,1478861803.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:43.649Z,1478861803.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:44.006Z,1478861804.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:44.042Z,1478861804.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:44.397Z,1478861804.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:44.449Z,1478861804.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:44.801Z,1478861804.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:44.855Z,1478861804.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:45.201Z,1478861805.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:45.216Z,1478861805.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:45.612Z,1478861805.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:45.643Z,1478861805.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:46.017Z,1478861806.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:46.048Z,1478861806.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:46.405Z,1478861806.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:46.421Z,1478861806.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:46.800Z,1478861806.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:46.828Z,1478861806.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:47.205Z,1478861807.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:47.221Z,1478861807.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:47.609Z,1478861807.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:47.641Z,1478861807.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:47.997Z,1478861807.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:48.029Z,1478861808.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:48.397Z,1478861808.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:48.429Z,1478861808.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:48.802Z,1478861808.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:48.828Z,1478861808.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:49.197Z,1478861809.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:49.229Z,1478861809.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:49.597Z,1478861809.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:49.629Z,1478861809.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:49.997Z,1478861809.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:50.041Z,1478861810.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:50.397Z,1478861810.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:50.437Z,1478861810.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:50.797Z,1478861810.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:50.813Z,1478861810.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:51.198Z,1478861811.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:51.217Z,1478861811.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:51.601Z,1478861811.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:51.617Z,1478861811.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:52.013Z,1478861812.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:52.041Z,1478861812.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:52.414Z,1478861812.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:52.429Z,1478861812.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:52.797Z,1478861812.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:52.829Z,1478861812.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:53.197Z,1478861813.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:53.229Z,1478861813.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:53.598Z,1478861813.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:53.624Z,1478861813.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:53.998Z,1478861813.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:54.021Z,1478861814.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:54.412Z,1478861814.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:54.433Z,1478861814.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:54.812Z,1478861814.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:54.837Z,1478861814.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:55.200Z,1478861815.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:55.224Z,1478861815.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:55.613Z,1478861815.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:55.712Z,1478861815.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:56.002Z,1478861816.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:56.040Z,1478861816.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:56.397Z,1478861816.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:56.437Z,1478861816.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:56.801Z,1478861816.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:56.837Z,1478861816.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:57.197Z,1478861817.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:57.258Z,1478861817.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:57.600Z,1478861817.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:57.621Z,1478861817.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:58.013Z,1478861818.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:58.029Z,1478861818.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:58.405Z,1478861818.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:58.467Z,1478861818.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:58.816Z,1478861818.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:58.836Z,1478861818.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:59.218Z,1478861819.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:59.273Z,1478861819.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:59.597Z,1478861819.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:56:59.646Z,1478861819.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:56:59.997Z,1478861819.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:00.036Z,1478861820.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:00.405Z,1478861820.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:00.431Z,1478861820.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:00.798Z,1478861820.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:00.832Z,1478861820.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:01.216Z,1478861821.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:01.238Z,1478861821.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:01.620Z,1478861821.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:01.636Z,1478861821.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:01.997Z,1478861821.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:02.035Z,1478861822.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:02.400Z,1478861822.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:02.423Z,1478861822.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:02.808Z,1478861822.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:02.824Z,1478861822.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:03.205Z,1478861823.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:03.225Z,1478861823.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:03.597Z,1478861823.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:03.629Z,1478861823.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:04.001Z,1478861824.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:04.039Z,1478861824.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:04.398Z,1478861824.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:04.429Z,1478861824.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:04.797Z,1478861824.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:04.837Z,1478861824.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:05.197Z,1478861825.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:05.217Z,1478861825.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:05.601Z,1478861825.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:05.623Z,1478861825.623 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:05.671Z,1478861825.671 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 103
2016-11-11T10:57:05.671Z,1478861825.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T10:57:05.697Z,1478861825.697 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:05.697Z,1478861825.697 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 103
2016-11-11T10:57:05.697Z,1478861825.697 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T10:57:05.707Z,1478861825.707 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:05.708Z,1478861825.708 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 103
2016-11-11T10:57:05.708Z,1478861825.708 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T10:57:05.747Z,1478861825.747 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T10:57:05.759Z,1478861825.759 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T10:57:05.760Z,1478861825.760 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T10:57:05.997Z,1478861825.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:06.046Z,1478861826.046 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T10:57:06.047Z,1478861826.046 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 103
2016-11-11T10:57:06.047Z,1478861826.047 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T10:57:06.047Z,1478861826.047 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 103
2016-11-11T10:57:06.048Z,1478861826.048 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T10:57:06.049Z,1478861826.049 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 103
2016-11-11T10:57:06.405Z,1478861826.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:06.430Z,1478861826.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T10:57:06.430Z,1478861826.430 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:57:06.430Z,1478861826.430 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:57:06.435Z,1478861826.435 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T10:57:06.436Z,1478861826.436 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:57:06.436Z,1478861826.436 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:57:06.437Z,1478861826.437 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T10:57:06.437Z,1478861826.437 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T10:57:06.437Z,1478861826.437 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T10:57:06.797Z,1478861826.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:06.841Z,1478861826.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:07.198Z,1478861827.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:07.237Z,1478861827.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:07.605Z,1478861827.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:07.670Z,1478861827.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:08.018Z,1478861828.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:08.044Z,1478861828.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:08.397Z,1478861828.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:08.423Z,1478861828.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:08.813Z,1478861828.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:08.832Z,1478861828.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:09.198Z,1478861829.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:09.230Z,1478861829.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:09.601Z,1478861829.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:09.682Z,1478861829.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:10.012Z,1478861830.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:10.048Z,1478861830.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:10.417Z,1478861830.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:10.462Z,1478861830.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:10.806Z,1478861830.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:10.849Z,1478861830.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:11.205Z,1478861831.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:11.225Z,1478861831.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:11.610Z,1478861831.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:11.655Z,1478861831.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:12.011Z,1478861832.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:12.069Z,1478861832.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:12.407Z,1478861832.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:12.448Z,1478861832.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:12.807Z,1478861832.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:12.852Z,1478861832.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:13.200Z,1478861833.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:13.229Z,1478861833.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:13.600Z,1478861833.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:13.653Z,1478861833.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:14.007Z,1478861834.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:14.061Z,1478861834.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:14.398Z,1478861834.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:14.440Z,1478861834.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:14.798Z,1478861834.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:14.832Z,1478861834.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:15.197Z,1478861835.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:15.238Z,1478861835.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:15.597Z,1478861835.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:15.614Z,1478861835.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:15.997Z,1478861835.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:16.014Z,1478861836.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:16.409Z,1478861836.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:16.451Z,1478861836.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:16.801Z,1478861836.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:16.821Z,1478861836.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:17.200Z,1478861837.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:17.216Z,1478861837.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:17.604Z,1478861837.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:17.701Z,1478861837.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:18.001Z,1478861838.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:18.053Z,1478861838.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:18.416Z,1478861838.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:18.423Z,1478861838.423 [PNI_TCM](ERROR): CRC does not match. Expected:0x19988 got:0x7361
2016-11-11T10:57:18.457Z,1478861838.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:18.816Z,1478861838.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:18.852Z,1478861838.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:19.204Z,1478861839.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:19.222Z,1478861839.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:19.604Z,1478861839.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:19.678Z,1478861839.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:20.002Z,1478861840.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:20.038Z,1478861840.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:20.398Z,1478861840.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:20.439Z,1478861840.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:20.797Z,1478861840.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:20.835Z,1478861840.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:21.198Z,1478861841.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:21.237Z,1478861841.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:21.599Z,1478861841.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:21.696Z,1478861841.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:22.005Z,1478861842.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:22.048Z,1478861842.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:22.405Z,1478861842.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:22.427Z,1478861842.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:22.805Z,1478861842.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:22.824Z,1478861842.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:23.204Z,1478861843.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:23.233Z,1478861843.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:23.626Z,1478861843.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:23.684Z,1478861843.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:24.005Z,1478861844.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:24.037Z,1478861844.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:24.397Z,1478861844.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:24.418Z,1478861844.418 [PNI_TCM](ERROR): CRC does not match. Expected:0x10029 got:0x28836
2016-11-11T10:57:24.445Z,1478861844.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:24.800Z,1478861844.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:24.857Z,1478861844.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:25.197Z,1478861845.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:25.232Z,1478861845.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:25.597Z,1478861845.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:25.626Z,1478861845.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:26.009Z,1478861846.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:26.077Z,1478861846.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:26.398Z,1478861846.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:26.441Z,1478861846.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:26.800Z,1478861846.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:26.839Z,1478861846.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:27.213Z,1478861847.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:27.261Z,1478861847.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:27.609Z,1478861847.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:27.644Z,1478861847.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:28.006Z,1478861848.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:28.057Z,1478861848.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:28.405Z,1478861848.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:28.465Z,1478861848.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:28.801Z,1478861848.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:28.820Z,1478861848.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:29.205Z,1478861849.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:29.221Z,1478861849.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:29.612Z,1478861849.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:29.627Z,1478861849.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:30.002Z,1478861850.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:30.037Z,1478861850.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:30.397Z,1478861850.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:30.410Z,1478861850.410 [PNI_TCM](ERROR): CRC does not match. Expected:0x32758 got:0x48812
2016-11-11T10:57:30.434Z,1478861850.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:30.812Z,1478861850.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:30.819Z,1478861850.819 [PNI_TCM](ERROR): CRC does not match. Expected:0x52509 got:0x32768
2016-11-11T10:57:30.845Z,1478861850.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:31.200Z,1478861851.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:31.237Z,1478861851.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:31.633Z,1478861851.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:31.675Z,1478861851.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:32.007Z,1478861852.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:32.044Z,1478861852.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:32.403Z,1478861852.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:32.427Z,1478861852.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:32.806Z,1478861852.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:32.822Z,1478861852.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:33.209Z,1478861853.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:33.227Z,1478861853.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:33.621Z,1478861853.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:33.669Z,1478861853.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:33.999Z,1478861853.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:34.033Z,1478861854.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:34.402Z,1478861854.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:34.428Z,1478861854.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:34.797Z,1478861854.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:34.829Z,1478861854.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:35.199Z,1478861855.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:35.234Z,1478861855.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:35.656Z,1478861855.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:35.706Z,1478861855.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:36.013Z,1478861856.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:36.028Z,1478861856.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:36.404Z,1478861856.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:36.422Z,1478861856.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:36.802Z,1478861856.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:36.836Z,1478861856.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:37.207Z,1478861857.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:37.222Z,1478861857.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:37.647Z,1478861857.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:37.690Z,1478861857.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:37.998Z,1478861857.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:38.038Z,1478861858.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:38.399Z,1478861858.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:38.406Z,1478861858.406 [PNI_TCM](ERROR): CRC does not match. Expected:0x12844 got:0x25863
2016-11-11T10:57:38.442Z,1478861858.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:38.810Z,1478861858.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:38.840Z,1478861858.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:46.366Z,1478861866.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:46.397Z,1478861866.397 [BPC1](ERROR): Failed to receive battery data
2016-11-11T10:57:46.397Z,1478861866.397 [BPC1] Communications Fault, FailCount= 1
2016-11-11T10:57:46.397Z,1478861866.397 [BPC1](ERROR): Communications Fault
2016-11-11T10:57:46.418Z,1478861866.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:46.483Z,1478861866.483 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T10:57:46.566Z,1478861866.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:46.629Z,1478861866.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:46.923Z,1478861866.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:46.945Z,1478861866.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:47.329Z,1478861867.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:47.373Z,1478861867.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:47.430Z,1478861867.430 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:57:47.430Z,1478861867.430 [BPC1] No Fault, FailCount= 1
2016-11-11T10:57:47.723Z,1478861867.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:47.825Z,1478861867.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:48.123Z,1478861868.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:48.182Z,1478861868.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:48.532Z,1478861868.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:48.585Z,1478861868.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:48.941Z,1478861868.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:48.987Z,1478861868.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:49.344Z,1478861869.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:49.375Z,1478861869.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:49.756Z,1478861869.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:49.786Z,1478861869.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:50.128Z,1478861870.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:50.144Z,1478861870.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:50.536Z,1478861870.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:50.552Z,1478861870.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:50.944Z,1478861870.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:50.975Z,1478861870.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:51.329Z,1478861871.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:51.355Z,1478861871.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:51.729Z,1478861871.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:51.774Z,1478861871.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:52.136Z,1478861872.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:52.166Z,1478861872.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:52.521Z,1478861872.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:52.557Z,1478861872.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:52.940Z,1478861872.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:52.976Z,1478861872.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:53.332Z,1478861873.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:53.347Z,1478861873.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:53.745Z,1478861873.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:53.820Z,1478861873.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:54.141Z,1478861874.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:54.191Z,1478861874.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:54.524Z,1478861874.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:54.563Z,1478861874.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:54.924Z,1478861874.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:54.968Z,1478861874.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:55.332Z,1478861875.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:55.401Z,1478861875.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:55.732Z,1478861875.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:55.758Z,1478861875.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:56.138Z,1478861876.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:56.200Z,1478861876.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:56.531Z,1478861876.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:56.551Z,1478861876.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:56.924Z,1478861876.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:56.962Z,1478861876.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:57.346Z,1478861877.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:57.406Z,1478861877.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:57.734Z,1478861877.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:57.768Z,1478861877.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:58.124Z,1478861878.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:58.177Z,1478861878.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:58.523Z,1478861878.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:58.563Z,1478861878.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:58.923Z,1478861878.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:59.006Z,1478861879.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:59.334Z,1478861879.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:59.382Z,1478861879.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:57:59.732Z,1478861879.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:57:59.756Z,1478861879.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:00.123Z,1478861880.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:00.162Z,1478861880.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:00.522Z,1478861880.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:00.593Z,1478861880.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:00.931Z,1478861880.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:00.956Z,1478861880.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:01.322Z,1478861881.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:01.396Z,1478861881.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:01.722Z,1478861881.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:01.758Z,1478861881.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:02.123Z,1478861882.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:02.198Z,1478861882.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:02.533Z,1478861882.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:02.598Z,1478861882.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:02.935Z,1478861882.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:02.979Z,1478861882.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:03.330Z,1478861883.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:03.362Z,1478861883.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:03.723Z,1478861883.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:03.760Z,1478861883.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:04.123Z,1478861884.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:04.165Z,1478861884.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:04.523Z,1478861884.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:04.562Z,1478861884.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:04.922Z,1478861884.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:04.942Z,1478861884.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:05.324Z,1478861885.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:05.375Z,1478861885.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:05.740Z,1478861885.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:05.791Z,1478861885.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:06.121Z,1478861886.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:06.154Z,1478861886.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:06.521Z,1478861886.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:06.561Z,1478861886.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:06.921Z,1478861886.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:06.962Z,1478861886.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:07.329Z,1478861887.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:07.349Z,1478861887.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:07.738Z,1478861887.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:07.770Z,1478861887.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:08.124Z,1478861888.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:08.157Z,1478861888.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:08.538Z,1478861888.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:08.553Z,1478861888.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:08.930Z,1478861888.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:08.946Z,1478861888.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:09.322Z,1478861889.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:09.405Z,1478861889.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:09.721Z,1478861889.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:09.753Z,1478861889.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:10.121Z,1478861890.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:10.156Z,1478861890.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:10.521Z,1478861890.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:10.548Z,1478861890.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:10.933Z,1478861890.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:10.955Z,1478861890.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:11.338Z,1478861891.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:11.354Z,1478861891.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:11.725Z,1478861891.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:11.751Z,1478861891.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:12.129Z,1478861892.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:12.155Z,1478861892.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:12.521Z,1478861892.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:12.557Z,1478861892.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:12.921Z,1478861892.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:12.958Z,1478861892.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:13.321Z,1478861893.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:13.397Z,1478861893.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:13.721Z,1478861893.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:13.745Z,1478861893.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:14.129Z,1478861894.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:14.161Z,1478861894.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:14.524Z,1478861894.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:14.579Z,1478861894.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:14.921Z,1478861894.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:14.964Z,1478861894.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:15.321Z,1478861895.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:15.392Z,1478861895.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:15.737Z,1478861895.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:15.757Z,1478861895.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:16.121Z,1478861896.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:16.177Z,1478861896.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:16.521Z,1478861896.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:16.577Z,1478861896.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:16.937Z,1478861896.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:16.957Z,1478861896.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:17.323Z,1478861897.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:17.354Z,1478861897.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:17.729Z,1478861897.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:17.755Z,1478861897.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:18.121Z,1478861898.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:18.156Z,1478861898.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:18.521Z,1478861898.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:18.554Z,1478861898.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:18.921Z,1478861898.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:18.953Z,1478861898.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:19.329Z,1478861899.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:19.354Z,1478861899.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:19.714Z,1478861899.714 [NAL9602](INFO): SBD MO Status=2, MOMSN=344, MT Status=2, MTMSN=0
2016-11-11T10:58:19.715Z,1478861899.714 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T10:58:19.731Z,1478861899.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:19.776Z,1478861899.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:20.132Z,1478861900.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:20.165Z,1478861900.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:20.525Z,1478861900.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:20.557Z,1478861900.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:20.921Z,1478861900.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:20.961Z,1478861900.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:21.321Z,1478861901.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:21.357Z,1478861901.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:21.722Z,1478861901.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:21.752Z,1478861901.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:22.129Z,1478861902.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:22.149Z,1478861902.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:22.525Z,1478861902.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:22.547Z,1478861902.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:22.924Z,1478861902.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:22.956Z,1478861902.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:23.325Z,1478861903.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:23.348Z,1478861903.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:23.728Z,1478861903.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:23.748Z,1478861903.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:24.142Z,1478861904.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:24.158Z,1478861904.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:24.543Z,1478861904.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:24.558Z,1478861904.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:24.921Z,1478861904.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:24.953Z,1478861904.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:25.321Z,1478861905.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:25.350Z,1478861905.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:25.721Z,1478861905.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:25.758Z,1478861905.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:26.121Z,1478861906.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:26.157Z,1478861906.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:26.529Z,1478861906.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:26.555Z,1478861906.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:26.922Z,1478861906.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:26.966Z,1478861906.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:27.344Z,1478861907.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:27.389Z,1478861907.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:27.732Z,1478861907.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:27.748Z,1478861907.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:28.140Z,1478861908.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:28.155Z,1478861908.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:28.532Z,1478861908.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:28.585Z,1478861908.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:28.924Z,1478861908.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:28.952Z,1478861908.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:29.329Z,1478861909.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:29.357Z,1478861909.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:29.721Z,1478861909.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:29.792Z,1478861909.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:30.121Z,1478861910.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:30.153Z,1478861910.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:30.521Z,1478861910.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:30.570Z,1478861910.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:30.921Z,1478861910.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:30.957Z,1478861910.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:31.321Z,1478861911.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:31.373Z,1478861911.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:31.730Z,1478861911.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:31.757Z,1478861911.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:32.121Z,1478861912.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:32.149Z,1478861912.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:32.552Z,1478861912.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:32.573Z,1478861912.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:32.935Z,1478861912.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:32.969Z,1478861912.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:33.336Z,1478861913.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:33.370Z,1478861913.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:33.748Z,1478861913.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:33.764Z,1478861913.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:34.121Z,1478861914.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:34.139Z,1478861914.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:34.525Z,1478861914.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:34.545Z,1478861914.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:34.929Z,1478861914.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:34.945Z,1478861914.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:35.328Z,1478861915.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:35.349Z,1478861915.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:35.729Z,1478861915.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:35.749Z,1478861915.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:36.124Z,1478861916.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:36.152Z,1478861916.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:36.529Z,1478861916.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:36.549Z,1478861916.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:36.924Z,1478861916.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:36.953Z,1478861916.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:37.343Z,1478861917.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:37.359Z,1478861917.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:37.743Z,1478861917.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:37.758Z,1478861917.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:38.121Z,1478861918.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:38.153Z,1478861918.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:38.522Z,1478861918.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:38.550Z,1478861918.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:38.922Z,1478861918.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:38.958Z,1478861918.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:42.384Z,1478861922.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:42.420Z,1478861922.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:42.520Z,1478861922.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:42.568Z,1478861922.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:42.897Z,1478861922.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:42.934Z,1478861922.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:43.298Z,1478861923.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:43.381Z,1478861923.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:43.705Z,1478861923.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:43.732Z,1478861923.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:44.106Z,1478861924.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:44.158Z,1478861924.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:44.497Z,1478861924.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:44.537Z,1478861924.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:44.901Z,1478861924.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:44.958Z,1478861924.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:45.301Z,1478861925.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:45.345Z,1478861925.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:45.713Z,1478861925.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:45.768Z,1478861925.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:46.106Z,1478861926.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:46.138Z,1478861926.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:46.497Z,1478861926.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:46.529Z,1478861926.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:46.901Z,1478861926.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:46.934Z,1478861926.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:47.301Z,1478861927.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:47.338Z,1478861927.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:47.706Z,1478861927.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:47.732Z,1478861927.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:48.097Z,1478861928.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:48.125Z,1478861928.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:48.497Z,1478861928.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:48.533Z,1478861928.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:48.897Z,1478861928.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:48.936Z,1478861928.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:49.297Z,1478861929.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:49.333Z,1478861929.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:49.705Z,1478861929.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:49.730Z,1478861929.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:50.121Z,1478861930.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:50.141Z,1478861930.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:50.508Z,1478861930.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:50.549Z,1478861930.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:50.897Z,1478861930.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:50.941Z,1478861930.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:51.297Z,1478861931.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:51.317Z,1478861931.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:51.697Z,1478861931.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:51.717Z,1478861931.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:52.109Z,1478861932.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:52.141Z,1478861932.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:52.501Z,1478861932.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:52.521Z,1478861932.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:52.912Z,1478861932.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:52.944Z,1478861932.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:53.316Z,1478861933.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:53.351Z,1478861933.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:53.705Z,1478861933.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:53.720Z,1478861933.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:54.109Z,1478861934.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:54.129Z,1478861934.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:54.501Z,1478861934.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:54.523Z,1478861934.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:54.905Z,1478861934.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:54.920Z,1478861934.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:55.300Z,1478861935.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:55.328Z,1478861935.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:55.704Z,1478861935.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:55.725Z,1478861935.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:56.101Z,1478861936.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:56.125Z,1478861936.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:56.501Z,1478861936.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:56.524Z,1478861936.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:56.900Z,1478861936.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:56.933Z,1478861936.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:57.297Z,1478861937.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:57.350Z,1478861937.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:57.704Z,1478861937.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:57.720Z,1478861937.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:58.100Z,1478861938.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:58.157Z,1478861938.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:58.497Z,1478861938.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:58.532Z,1478861938.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:58.919Z,1478861938.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:58.970Z,1478861938.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:59.312Z,1478861939.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:59.340Z,1478861939.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:58:59.714Z,1478861939.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:58:59.771Z,1478861939.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:00.097Z,1478861940.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:00.153Z,1478861940.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:00.497Z,1478861940.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:00.529Z,1478861940.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:00.898Z,1478861940.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:00.930Z,1478861940.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:01.298Z,1478861941.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:01.329Z,1478861941.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:01.697Z,1478861941.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:01.731Z,1478861941.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:02.097Z,1478861942.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:02.128Z,1478861942.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:02.497Z,1478861942.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:02.529Z,1478861942.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:02.897Z,1478861942.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:02.936Z,1478861942.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:03.321Z,1478861943.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:03.341Z,1478861943.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:03.723Z,1478861943.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:03.738Z,1478861943.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:04.101Z,1478861944.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:04.133Z,1478861944.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:04.497Z,1478861944.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:04.542Z,1478861944.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:04.897Z,1478861944.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:04.937Z,1478861944.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:05.301Z,1478861945.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:05.336Z,1478861945.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:05.698Z,1478861945.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:05.713Z,1478861945.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:06.101Z,1478861946.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:06.121Z,1478861946.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:06.505Z,1478861946.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:06.525Z,1478861946.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:06.905Z,1478861946.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:06.933Z,1478861946.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:07.300Z,1478861947.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:07.333Z,1478861947.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:07.709Z,1478861947.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:07.724Z,1478861947.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:08.097Z,1478861948.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:08.123Z,1478861948.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:08.505Z,1478861948.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:08.527Z,1478861948.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:08.905Z,1478861948.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:08.927Z,1478861948.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:09.297Z,1478861949.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:09.332Z,1478861949.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:09.697Z,1478861949.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:09.723Z,1478861949.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:10.109Z,1478861950.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:10.129Z,1478861950.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:10.502Z,1478861950.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:10.536Z,1478861950.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:10.897Z,1478861950.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:10.929Z,1478861950.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:11.297Z,1478861951.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:11.329Z,1478861951.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:11.720Z,1478861951.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:11.735Z,1478861951.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:12.119Z,1478861952.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:12.185Z,1478861952.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:12.501Z,1478861952.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:12.529Z,1478861952.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:12.905Z,1478861952.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:12.932Z,1478861952.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:13.297Z,1478861953.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:13.317Z,1478861953.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:13.709Z,1478861953.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:13.745Z,1478861953.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:14.104Z,1478861954.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:14.119Z,1478861954.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:14.500Z,1478861954.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:14.542Z,1478861954.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:14.897Z,1478861954.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:14.923Z,1478861954.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:15.297Z,1478861955.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:15.317Z,1478861955.317 [BPC1](ERROR): Failed to receive battery data
2016-11-11T10:59:15.317Z,1478861955.317 [BPC1] Communications Fault, FailCount= 1
2016-11-11T10:59:15.317Z,1478861955.317 [BPC1](ERROR): Communications Fault
2016-11-11T10:59:15.329Z,1478861955.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:15.348Z,1478861955.348 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T10:59:15.697Z,1478861955.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:15.733Z,1478861955.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:16.116Z,1478861956.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:16.149Z,1478861956.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:16.502Z,1478861956.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:16.544Z,1478861956.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:16.563Z,1478861956.563 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:59:16.563Z,1478861956.563 [BPC1] No Fault, FailCount= 1
2016-11-11T10:59:16.903Z,1478861956.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:16.985Z,1478861956.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:17.301Z,1478861957.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:17.349Z,1478861957.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:17.710Z,1478861957.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:17.748Z,1478861957.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:18.102Z,1478861958.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:18.142Z,1478861958.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:18.502Z,1478861958.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:18.521Z,1478861958.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:18.905Z,1478861958.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:18.925Z,1478861958.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:19.301Z,1478861959.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:19.325Z,1478861959.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:19.700Z,1478861959.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:19.733Z,1478861959.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:20.106Z,1478861960.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:20.129Z,1478861960.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:20.497Z,1478861960.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:20.529Z,1478861960.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:20.897Z,1478861960.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:20.935Z,1478861960.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:21.298Z,1478861961.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:21.333Z,1478861961.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:21.698Z,1478861961.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:21.716Z,1478861961.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:22.102Z,1478861962.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:22.129Z,1478861962.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:22.500Z,1478861962.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:22.528Z,1478861962.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:22.897Z,1478861962.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:22.929Z,1478861962.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:23.297Z,1478861963.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:23.337Z,1478861963.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:23.697Z,1478861963.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:23.741Z,1478861963.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:24.097Z,1478861964.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:24.133Z,1478861964.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:24.501Z,1478861964.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:24.516Z,1478861964.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:24.901Z,1478861964.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:24.917Z,1478861964.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:25.301Z,1478861965.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:25.321Z,1478861965.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:25.709Z,1478861965.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:25.729Z,1478861965.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:26.102Z,1478861966.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:26.124Z,1478861966.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:26.500Z,1478861966.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:26.534Z,1478861966.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:26.904Z,1478861966.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:26.925Z,1478861966.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:27.310Z,1478861967.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:27.325Z,1478861967.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:27.697Z,1478861967.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:27.716Z,1478861967.716 [BPC1](ERROR): Failed to parse message.
2016-11-11T10:59:27.716Z,1478861967.716 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T10:59:27.716Z,1478861967.717 [BPC1] Data Fault, FailCount= 2
2016-11-11T10:59:27.716Z,1478861967.717 [BPC1](ERROR): Data Fault
2016-11-11T10:59:27.725Z,1478861967.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:27.745Z,1478861967.745 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T10:59:28.097Z,1478861968.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:28.131Z,1478861968.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:28.498Z,1478861968.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:28.524Z,1478861968.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:28.898Z,1478861968.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:28.929Z,1478861968.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:28.950Z,1478861968.950 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T10:59:28.950Z,1478861968.950 [BPC1] No Fault, FailCount= 2
2016-11-11T10:59:29.297Z,1478861969.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:29.366Z,1478861969.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:29.706Z,1478861969.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:29.738Z,1478861969.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:30.082Z,1478861970.082 [NAL9602](INFO): SBD MO Status=2, MOMSN=344, MT Status=2, MTMSN=0
2016-11-11T10:59:30.082Z,1478861970.082 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T10:59:30.099Z,1478861970.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:30.149Z,1478861970.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:30.507Z,1478861970.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:30.523Z,1478861970.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:30.905Z,1478861970.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:30.925Z,1478861970.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:31.303Z,1478861971.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:31.319Z,1478861971.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:31.709Z,1478861971.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:31.729Z,1478861971.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:32.105Z,1478861972.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:32.120Z,1478861972.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:32.500Z,1478861972.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:32.528Z,1478861972.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:32.905Z,1478861972.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:32.925Z,1478861972.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:33.305Z,1478861973.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:33.325Z,1478861973.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:33.700Z,1478861973.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:33.732Z,1478861973.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:34.112Z,1478861974.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:34.128Z,1478861974.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:34.520Z,1478861974.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:34.549Z,1478861974.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:34.915Z,1478861974.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:34.931Z,1478861974.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:35.317Z,1478861975.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:35.338Z,1478861975.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:35.720Z,1478861975.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:35.736Z,1478861975.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:36.097Z,1478861976.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:36.133Z,1478861976.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:36.501Z,1478861976.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:36.517Z,1478861976.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:36.901Z,1478861976.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:36.916Z,1478861976.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:37.301Z,1478861977.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:37.321Z,1478861977.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:37.704Z,1478861977.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:37.720Z,1478861977.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:38.110Z,1478861978.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:38.130Z,1478861978.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:38.509Z,1478861978.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:38.524Z,1478861978.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:38.900Z,1478861978.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:38.930Z,1478861978.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:39.320Z,1478861979.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:39.336Z,1478861979.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:42.722Z,1478861982.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:42.801Z,1478861982.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:42.898Z,1478861982.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:42.937Z,1478861982.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:43.273Z,1478861983.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:43.309Z,1478861983.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:43.673Z,1478861983.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:43.744Z,1478861983.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:44.085Z,1478861984.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:44.105Z,1478861984.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:44.474Z,1478861984.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:44.544Z,1478861984.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:44.874Z,1478861984.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:44.944Z,1478861984.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:45.273Z,1478861985.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:45.309Z,1478861985.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:45.674Z,1478861985.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:45.717Z,1478861985.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:46.074Z,1478861986.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:46.089Z,1478861986.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:46.473Z,1478861986.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:46.493Z,1478861986.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:46.877Z,1478861986.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:46.897Z,1478861986.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:47.271Z,1478861987.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:47.299Z,1478861987.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:47.681Z,1478861987.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:47.697Z,1478861987.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:48.080Z,1478861988.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:48.114Z,1478861988.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:48.477Z,1478861988.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:48.500Z,1478861988.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:48.899Z,1478861988.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:48.915Z,1478861988.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:49.299Z,1478861989.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:49.321Z,1478861989.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:49.673Z,1478861989.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:49.705Z,1478861989.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:50.081Z,1478861990.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:50.107Z,1478861990.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:50.478Z,1478861990.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:50.504Z,1478861990.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:50.874Z,1478861990.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:50.909Z,1478861990.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:51.284Z,1478861991.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:51.320Z,1478861991.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:51.684Z,1478861991.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:51.710Z,1478861991.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:52.076Z,1478861992.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:52.113Z,1478861992.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:52.473Z,1478861992.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:52.505Z,1478861992.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:52.874Z,1478861992.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:52.914Z,1478861992.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:53.275Z,1478861993.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:53.310Z,1478861993.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:53.681Z,1478861993.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:53.718Z,1478861993.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:54.074Z,1478861994.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:54.090Z,1478861994.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:54.475Z,1478861994.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:54.517Z,1478861994.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:54.877Z,1478861994.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:54.893Z,1478861994.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:55.282Z,1478861995.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:55.298Z,1478861995.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:55.695Z,1478861995.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:55.745Z,1478861995.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:56.093Z,1478861996.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:56.116Z,1478861996.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:56.474Z,1478861996.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:56.507Z,1478861996.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:56.873Z,1478861996.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:56.933Z,1478861996.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:57.273Z,1478861997.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:57.309Z,1478861997.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:57.686Z,1478861997.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:57.701Z,1478861997.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:58.080Z,1478861998.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:58.137Z,1478861998.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:58.481Z,1478861998.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:58.501Z,1478861998.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:58.881Z,1478861998.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:58.927Z,1478861998.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:59.276Z,1478861999.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:59.332Z,1478861999.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T10:59:59.688Z,1478861999.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T10:59:59.709Z,1478861999.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:00.097Z,1478862000.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:00.112Z,1478862000.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:00.488Z,1478862000.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:00.519Z,1478862000.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:00.877Z,1478862000.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:00.903Z,1478862000.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:01.273Z,1478862001.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:01.310Z,1478862001.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:01.673Z,1478862001.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:01.709Z,1478862001.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:02.103Z,1478862002.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:02.125Z,1478862002.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:02.488Z,1478862002.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:02.524Z,1478862002.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:02.873Z,1478862002.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:02.913Z,1478862002.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:03.273Z,1478862003.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:03.293Z,1478862003.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:03.673Z,1478862003.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:03.693Z,1478862003.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:04.073Z,1478862004.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:04.093Z,1478862004.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:04.474Z,1478862004.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:04.501Z,1478862004.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:04.873Z,1478862004.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:04.906Z,1478862004.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:05.273Z,1478862005.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:05.305Z,1478862005.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:05.673Z,1478862005.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:05.707Z,1478862005.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:06.073Z,1478862006.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:06.109Z,1478862006.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:06.474Z,1478862006.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:06.506Z,1478862006.506 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:06.506Z,1478862006.506 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 104
2016-11-11T11:00:06.506Z,1478862006.506 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:00:06.516Z,1478862006.516 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:06.517Z,1478862006.517 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 104
2016-11-11T11:00:06.517Z,1478862006.517 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:00:06.519Z,1478862006.519 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:06.523Z,1478862006.523 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 104
2016-11-11T11:00:06.523Z,1478862006.523 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:00:06.558Z,1478862006.558 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:00:06.558Z,1478862006.558 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:00:06.558Z,1478862006.558 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:00:06.873Z,1478862006.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:06.933Z,1478862006.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:00:06.933Z,1478862006.933 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 104
2016-11-11T11:00:06.933Z,1478862006.934 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:00:06.934Z,1478862006.934 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 104
2016-11-11T11:00:06.934Z,1478862006.934 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:00:06.934Z,1478862006.934 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 104
2016-11-11T11:00:07.280Z,1478862007.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:07.329Z,1478862007.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:00:07.330Z,1478862007.330 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:00:07.330Z,1478862007.330 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:00:07.335Z,1478862007.335 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:00:07.335Z,1478862007.335 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:00:07.336Z,1478862007.336 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:00:07.339Z,1478862007.339 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:00:07.340Z,1478862007.340 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:00:07.340Z,1478862007.340 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:00:07.681Z,1478862007.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:07.698Z,1478862007.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:08.076Z,1478862008.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:08.105Z,1478862008.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:08.478Z,1478862008.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:08.504Z,1478862008.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:08.873Z,1478862008.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:08.905Z,1478862008.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:09.273Z,1478862009.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:09.309Z,1478862009.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:09.682Z,1478862009.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:09.721Z,1478862009.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:10.073Z,1478862010.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:10.114Z,1478862010.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:10.488Z,1478862010.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:10.503Z,1478862010.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:10.900Z,1478862010.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:10.942Z,1478862010.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:11.277Z,1478862011.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:11.300Z,1478862011.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:11.685Z,1478862011.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:11.741Z,1478862011.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:12.073Z,1478862012.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:12.106Z,1478862012.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:12.479Z,1478862012.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:12.515Z,1478862012.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:12.873Z,1478862012.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:12.925Z,1478862012.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:13.273Z,1478862013.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:13.317Z,1478862013.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:13.673Z,1478862013.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:13.729Z,1478862013.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:14.073Z,1478862014.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:14.124Z,1478862014.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:14.474Z,1478862014.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:14.493Z,1478862014.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:14.873Z,1478862014.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:14.893Z,1478862014.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:15.277Z,1478862015.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:15.297Z,1478862015.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:15.678Z,1478862015.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:15.702Z,1478862015.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:16.081Z,1478862016.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:16.096Z,1478862016.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:16.481Z,1478862016.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:16.496Z,1478862016.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:16.881Z,1478862016.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:16.904Z,1478862016.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:17.295Z,1478862017.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:17.310Z,1478862017.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:17.691Z,1478862017.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:17.713Z,1478862017.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:18.082Z,1478862018.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:18.114Z,1478862018.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:18.473Z,1478862018.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:18.493Z,1478862018.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:18.873Z,1478862018.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:18.893Z,1478862018.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:19.288Z,1478862019.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:19.303Z,1478862019.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:19.684Z,1478862019.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:19.710Z,1478862019.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:20.076Z,1478862020.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:20.104Z,1478862020.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:20.477Z,1478862020.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:20.502Z,1478862020.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:20.876Z,1478862020.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:20.909Z,1478862020.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:21.273Z,1478862021.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:21.307Z,1478862021.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:21.682Z,1478862021.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:21.727Z,1478862021.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:22.073Z,1478862022.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:22.093Z,1478862022.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:22.477Z,1478862022.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:22.497Z,1478862022.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:22.878Z,1478862022.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:22.893Z,1478862022.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:23.277Z,1478862023.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:23.297Z,1478862023.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:23.680Z,1478862023.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:23.708Z,1478862023.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:24.093Z,1478862024.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:24.113Z,1478862024.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:24.485Z,1478862024.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:24.505Z,1478862024.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:24.877Z,1478862024.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:24.928Z,1478862024.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:25.278Z,1478862025.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:25.316Z,1478862025.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:25.681Z,1478862025.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:25.701Z,1478862025.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:26.088Z,1478862026.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:26.105Z,1478862026.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:26.491Z,1478862026.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:26.541Z,1478862026.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:26.873Z,1478862026.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:26.909Z,1478862026.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:27.273Z,1478862027.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:27.325Z,1478862027.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:27.705Z,1478862027.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:27.729Z,1478862027.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:28.084Z,1478862028.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:28.143Z,1478862028.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:28.473Z,1478862028.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:28.509Z,1478862028.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:28.874Z,1478862028.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:28.925Z,1478862028.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:29.273Z,1478862029.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:29.293Z,1478862029.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:29.681Z,1478862029.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:29.718Z,1478862029.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:30.086Z,1478862030.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:30.105Z,1478862030.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:30.477Z,1478862030.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:30.500Z,1478862030.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:30.882Z,1478862030.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:30.897Z,1478862030.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:31.286Z,1478862031.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:31.321Z,1478862031.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:31.676Z,1478862031.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:31.710Z,1478862031.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:32.074Z,1478862032.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:32.106Z,1478862032.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:32.474Z,1478862032.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:32.514Z,1478862032.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:32.874Z,1478862032.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:32.920Z,1478862032.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:33.273Z,1478862033.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:33.361Z,1478862033.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:33.681Z,1478862033.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:33.697Z,1478862033.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:34.073Z,1478862034.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:34.090Z,1478862034.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:34.484Z,1478862034.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:34.524Z,1478862034.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:34.893Z,1478862034.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:34.911Z,1478862034.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:35.276Z,1478862035.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:35.373Z,1478862035.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:35.673Z,1478862035.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:35.706Z,1478862035.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:36.073Z,1478862036.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:36.118Z,1478862036.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:36.473Z,1478862036.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:36.510Z,1478862036.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:36.873Z,1478862036.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:36.909Z,1478862036.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:37.274Z,1478862037.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:37.297Z,1478862037.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:37.677Z,1478862037.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:37.699Z,1478862037.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:38.081Z,1478862038.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:38.101Z,1478862038.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:38.481Z,1478862038.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:38.501Z,1478862038.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:38.881Z,1478862038.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:38.901Z,1478862038.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:39.280Z,1478862039.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:39.359Z,1478862039.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:39.674Z,1478862039.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:39.714Z,1478862039.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:43.197Z,1478862043.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:43.261Z,1478862043.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:43.275Z,1478862043.275 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T10:55:41.8Z
2016-11-11T11:00:43.275Z,1478862043.275 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T11:00:43.275Z,1478862043.275 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T11:00:43.373Z,1478862043.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:43.396Z,1478862043.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:44.304Z,1478862044.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:44.354Z,1478862044.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:44.464Z,1478862044.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:44.497Z,1478862044.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:44.845Z,1478862044.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:44.897Z,1478862044.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:45.278Z,1478862045.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:45.321Z,1478862045.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:48.776Z,1478862048.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:48.813Z,1478862048.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:48.884Z,1478862048.884 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0144.lzma
2016-11-11T11:00:48.912Z,1478862048.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:48.936Z,1478862048.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:49.303Z,1478862049.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:49.363Z,1478862049.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:49.669Z,1478862049.669 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0144.lzma.bak
2016-11-11T11:00:49.669Z,1478862049.669 [DataOverHttps](INFO): SBD MOMSN=4555343
2016-11-11T11:00:49.698Z,1478862049.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:49.740Z,1478862049.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:50.973Z,1478862050.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:51.023Z,1478862051.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:51.120Z,1478862051.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:51.153Z,1478862051.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:54.482Z,1478862054.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:54.501Z,1478862054.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:54.596Z,1478862054.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:54.626Z,1478862054.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:55.001Z,1478862055.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:55.033Z,1478862055.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:55.470Z,1478862055.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:55.520Z,1478862055.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:55.796Z,1478862055.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:55.830Z,1478862055.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:56.214Z,1478862056.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:56.281Z,1478862056.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:58.168Z,1478862058.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:58.964Z,1478862058.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:59.678Z,1478862059.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:59.714Z,1478862059.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:00:59.760Z,1478862059.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:59.813Z,1478862059.813 [DataOverHttps](INFO): Sending 162 bytes from file Logs/20161111T044527/Express0145.lzma
2016-11-11T11:00:59.834Z,1478862059.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:00:59.869Z,1478862059.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:00.172Z,1478862060.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:00.256Z,1478862060.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:00.305Z,1478862060.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:00.968Z,1478862060.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:01.764Z,1478862061.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:02.560Z,1478862062.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:03.356Z,1478862063.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:04.152Z,1478862064.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:04.948Z,1478862064.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:07.336Z,1478862067.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:08.132Z,1478862068.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:08.928Z,1478862068.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:09.724Z,1478862069.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:10.520Z,1478862070.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:11.316Z,1478862071.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:12.112Z,1478862072.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:12.909Z,1478862072.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:13.704Z,1478862073.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:14.500Z,1478862074.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:15.513Z,1478862075.513 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0145.lzma.bak
2016-11-11T11:01:15.513Z,1478862075.513 [DataOverHttps](INFO): SBD MOMSN=4555345
2016-11-11T11:01:15.521Z,1478862075.521 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T11:01:15.538Z,1478862075.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:15.555Z,1478862075.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:18.191Z,1478862078.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:18.254Z,1478862078.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:18.262Z,1478862078.262 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T11:01:18.262Z,1478862078.263 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T11:01:18.263Z,1478862078.263 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T11:01:18.346Z,1478862078.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:18.381Z,1478862078.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:21.774Z,1478862081.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:21.814Z,1478862081.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:21.918Z,1478862081.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:21.979Z,1478862081.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:22.309Z,1478862082.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:22.324Z,1478862082.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:22.508Z,1478862082.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:22.704Z,1478862082.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:22.719Z,1478862082.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:23.104Z,1478862083.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:23.120Z,1478862083.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:23.304Z,1478862083.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:23.488Z,1478862083.489 [NAL9602](INFO): Powering down
2016-11-11T11:01:23.523Z,1478862083.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:23.546Z,1478862083.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:23.768Z,1478862083.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:23.904Z,1478862083.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:23.925Z,1478862083.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:24.304Z,1478862084.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:24.320Z,1478862084.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:24.564Z,1478862084.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:24.709Z,1478862084.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:24.730Z,1478862084.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:25.097Z,1478862085.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:25.131Z,1478862085.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:25.360Z,1478862085.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:25.497Z,1478862085.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:25.529Z,1478862085.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:25.911Z,1478862085.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:25.930Z,1478862085.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:26.297Z,1478862086.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:26.325Z,1478862086.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:26.697Z,1478862086.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:26.729Z,1478862086.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:27.101Z,1478862087.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:27.133Z,1478862087.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:27.512Z,1478862087.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:27.533Z,1478862087.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:27.897Z,1478862087.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:27.920Z,1478862087.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:28.297Z,1478862088.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:28.333Z,1478862088.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:28.697Z,1478862088.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:28.737Z,1478862088.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:29.097Z,1478862089.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:29.137Z,1478862089.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:29.501Z,1478862089.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:29.521Z,1478862089.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:29.910Z,1478862089.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:29.925Z,1478862089.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:30.306Z,1478862090.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:30.322Z,1478862090.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:30.705Z,1478862090.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:30.720Z,1478862090.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:31.103Z,1478862091.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:31.126Z,1478862091.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:31.506Z,1478862091.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:31.522Z,1478862091.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:31.900Z,1478862091.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:31.916Z,1478862091.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:32.303Z,1478862092.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:32.325Z,1478862092.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:32.704Z,1478862092.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:32.766Z,1478862092.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:33.104Z,1478862093.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:33.126Z,1478862093.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:33.508Z,1478862093.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:33.590Z,1478862093.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:33.897Z,1478862093.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:33.933Z,1478862093.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:34.301Z,1478862094.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:34.373Z,1478862094.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:34.697Z,1478862094.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:34.733Z,1478862094.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:35.097Z,1478862095.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:35.146Z,1478862095.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:35.497Z,1478862095.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:35.517Z,1478862095.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:35.900Z,1478862095.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:35.947Z,1478862095.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:36.300Z,1478862096.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:36.316Z,1478862096.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:36.704Z,1478862096.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:36.719Z,1478862096.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:37.100Z,1478862097.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:37.121Z,1478862097.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:37.505Z,1478862097.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:37.520Z,1478862097.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:37.908Z,1478862097.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:37.929Z,1478862097.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:38.304Z,1478862098.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:38.325Z,1478862098.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:38.697Z,1478862098.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:38.732Z,1478862098.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:39.097Z,1478862099.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:39.131Z,1478862099.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:39.501Z,1478862099.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:39.538Z,1478862099.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:39.897Z,1478862099.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:39.929Z,1478862099.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:40.297Z,1478862100.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:40.332Z,1478862100.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:40.697Z,1478862100.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:40.733Z,1478862100.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:41.100Z,1478862101.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:41.116Z,1478862101.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:41.497Z,1478862101.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:41.569Z,1478862101.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:41.903Z,1478862101.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:41.930Z,1478862101.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:42.304Z,1478862102.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:42.319Z,1478862102.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:42.704Z,1478862102.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:42.725Z,1478862102.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:43.105Z,1478862103.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:43.125Z,1478862103.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:43.497Z,1478862103.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:43.534Z,1478862103.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:43.901Z,1478862103.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:43.933Z,1478862103.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:44.301Z,1478862104.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:44.333Z,1478862104.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:44.701Z,1478862104.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:44.733Z,1478862104.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:45.097Z,1478862105.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:45.140Z,1478862105.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:45.509Z,1478862105.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:45.524Z,1478862105.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:45.904Z,1478862105.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:45.919Z,1478862105.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:46.303Z,1478862106.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:46.325Z,1478862106.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:46.704Z,1478862106.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:46.719Z,1478862106.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:47.108Z,1478862107.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:47.124Z,1478862107.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:47.505Z,1478862107.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:47.557Z,1478862107.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:47.897Z,1478862107.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:47.917Z,1478862107.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:48.300Z,1478862108.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:48.316Z,1478862108.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:48.697Z,1478862108.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:48.745Z,1478862108.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:49.097Z,1478862109.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:49.117Z,1478862109.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:49.497Z,1478862109.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:49.549Z,1478862109.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:49.897Z,1478862109.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:49.949Z,1478862109.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:50.301Z,1478862110.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:50.336Z,1478862110.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:50.697Z,1478862110.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:50.712Z,1478862110.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:51.112Z,1478862111.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:51.136Z,1478862111.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:51.513Z,1478862111.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:51.536Z,1478862111.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:51.902Z,1478862111.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:51.918Z,1478862111.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:52.297Z,1478862112.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:52.317Z,1478862112.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:52.712Z,1478862112.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:52.728Z,1478862112.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:53.101Z,1478862113.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:53.140Z,1478862113.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:53.501Z,1478862113.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:53.516Z,1478862113.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:53.897Z,1478862113.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:53.917Z,1478862113.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:54.297Z,1478862114.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:54.312Z,1478862114.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:54.701Z,1478862114.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:54.716Z,1478862114.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:55.097Z,1478862115.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:55.117Z,1478862115.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:55.501Z,1478862115.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:55.516Z,1478862115.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:55.897Z,1478862115.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:55.912Z,1478862115.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:56.301Z,1478862116.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:56.321Z,1478862116.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:56.699Z,1478862116.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:56.715Z,1478862116.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:57.101Z,1478862117.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:57.121Z,1478862117.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:57.501Z,1478862117.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:57.574Z,1478862117.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:57.901Z,1478862117.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:57.921Z,1478862117.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:58.301Z,1478862118.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:58.321Z,1478862118.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:58.701Z,1478862118.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:58.721Z,1478862118.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:59.101Z,1478862119.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:59.116Z,1478862119.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:59.497Z,1478862119.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:59.517Z,1478862119.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:01:59.901Z,1478862119.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:01:59.921Z,1478862119.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:00.297Z,1478862120.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:00.313Z,1478862120.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:00.701Z,1478862120.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:00.721Z,1478862120.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:01.097Z,1478862121.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:01.117Z,1478862121.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:01.501Z,1478862121.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:01.517Z,1478862121.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:01.897Z,1478862121.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:01.950Z,1478862121.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:02.305Z,1478862122.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:02.321Z,1478862122.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:02.752Z,1478862122.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:02.801Z,1478862122.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:03.101Z,1478862123.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:03.126Z,1478862123.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:03.501Z,1478862123.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:03.580Z,1478862123.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:03.901Z,1478862123.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:03.952Z,1478862123.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:04.301Z,1478862124.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:04.316Z,1478862124.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:04.697Z,1478862124.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:04.717Z,1478862124.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:05.101Z,1478862125.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:05.116Z,1478862125.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:05.505Z,1478862125.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:05.525Z,1478862125.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:05.905Z,1478862125.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:05.926Z,1478862125.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:06.306Z,1478862126.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:06.364Z,1478862126.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:06.697Z,1478862126.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:06.712Z,1478862126.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:07.105Z,1478862127.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:07.125Z,1478862127.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:07.501Z,1478862127.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:07.516Z,1478862127.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:07.901Z,1478862127.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:07.916Z,1478862127.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:08.297Z,1478862128.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:08.317Z,1478862128.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:08.697Z,1478862128.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:08.713Z,1478862128.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:09.098Z,1478862129.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:09.134Z,1478862129.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:09.502Z,1478862129.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:09.517Z,1478862129.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:09.901Z,1478862129.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:09.917Z,1478862129.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:10.298Z,1478862130.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:10.317Z,1478862130.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:10.702Z,1478862130.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:10.717Z,1478862130.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:11.097Z,1478862131.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:11.117Z,1478862131.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:11.501Z,1478862131.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:11.521Z,1478862131.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:11.897Z,1478862131.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:11.913Z,1478862131.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:12.301Z,1478862132.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:12.326Z,1478862132.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:12.698Z,1478862132.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:12.729Z,1478862132.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:13.111Z,1478862133.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:13.147Z,1478862133.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:13.498Z,1478862133.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:13.522Z,1478862133.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:13.909Z,1478862133.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:13.953Z,1478862133.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:14.297Z,1478862134.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:14.329Z,1478862134.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:14.698Z,1478862134.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:14.725Z,1478862134.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:15.097Z,1478862135.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:15.176Z,1478862135.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:15.497Z,1478862135.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:15.531Z,1478862135.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:15.898Z,1478862135.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:15.956Z,1478862135.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:16.297Z,1478862136.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:16.356Z,1478862136.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:16.697Z,1478862136.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:16.727Z,1478862136.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:17.097Z,1478862137.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:17.161Z,1478862137.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:17.497Z,1478862137.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:17.545Z,1478862137.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:17.897Z,1478862137.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:17.944Z,1478862137.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:18.297Z,1478862138.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:18.357Z,1478862138.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:18.712Z,1478862138.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:18.762Z,1478862138.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:22.218Z,1478862142.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:22.242Z,1478862142.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:22.352Z,1478862142.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:22.369Z,1478862142.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:22.699Z,1478862142.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:22.740Z,1478862142.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:23.097Z,1478862143.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:23.133Z,1478862143.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:23.501Z,1478862143.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:23.519Z,1478862143.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:23.893Z,1478862143.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:23.925Z,1478862143.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:24.292Z,1478862144.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:24.320Z,1478862144.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:24.693Z,1478862144.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:24.729Z,1478862144.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:25.093Z,1478862145.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:25.175Z,1478862145.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:25.493Z,1478862145.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:25.513Z,1478862145.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:25.899Z,1478862145.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:25.916Z,1478862145.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:26.299Z,1478862146.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:26.318Z,1478862146.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:26.699Z,1478862146.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:26.720Z,1478862146.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:27.123Z,1478862147.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:27.200Z,1478862147.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:27.493Z,1478862147.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:27.527Z,1478862147.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:27.893Z,1478862147.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:27.929Z,1478862147.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:28.294Z,1478862148.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:28.312Z,1478862148.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:28.693Z,1478862148.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:28.740Z,1478862148.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:29.093Z,1478862149.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:29.185Z,1478862149.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:29.501Z,1478862149.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:29.519Z,1478862149.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:29.908Z,1478862149.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:29.929Z,1478862149.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:30.304Z,1478862150.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:30.337Z,1478862150.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:30.693Z,1478862150.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:30.773Z,1478862150.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:31.093Z,1478862151.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:31.179Z,1478862151.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:31.499Z,1478862151.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:31.557Z,1478862151.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:31.890Z,1478862151.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:31.930Z,1478862151.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:32.293Z,1478862152.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:32.338Z,1478862152.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:32.698Z,1478862152.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:32.753Z,1478862152.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:33.099Z,1478862153.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:33.131Z,1478862153.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:33.493Z,1478862153.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:33.534Z,1478862153.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:33.901Z,1478862153.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:33.920Z,1478862153.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:34.302Z,1478862154.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:34.318Z,1478862154.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:34.703Z,1478862154.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:34.725Z,1478862154.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:35.099Z,1478862155.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:35.141Z,1478862155.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:35.501Z,1478862155.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:35.520Z,1478862155.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:35.903Z,1478862155.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:35.925Z,1478862155.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:36.295Z,1478862156.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:36.327Z,1478862156.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:36.695Z,1478862156.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:36.738Z,1478862156.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:37.095Z,1478862157.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:37.149Z,1478862157.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:37.504Z,1478862157.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:37.530Z,1478862157.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:37.897Z,1478862157.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:37.922Z,1478862157.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:38.304Z,1478862158.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:38.361Z,1478862158.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:38.710Z,1478862158.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:38.722Z,1478862158.722 [PNI_TCM](ERROR): CRC does not match. Expected:0x13252 got:0x55559
2016-11-11T11:02:38.765Z,1478862158.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:39.125Z,1478862159.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:39.203Z,1478862159.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:39.506Z,1478862159.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:39.541Z,1478862159.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:39.899Z,1478862159.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:39.941Z,1478862159.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:40.306Z,1478862160.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:40.326Z,1478862160.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:40.699Z,1478862160.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:40.737Z,1478862160.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:41.167Z,1478862161.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:41.245Z,1478862161.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:41.520Z,1478862161.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:41.567Z,1478862161.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:41.918Z,1478862161.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:41.963Z,1478862161.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:42.305Z,1478862162.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:42.326Z,1478862162.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:42.696Z,1478862162.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:42.748Z,1478862162.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:43.126Z,1478862163.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:43.184Z,1478862163.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:43.498Z,1478862163.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:43.528Z,1478862163.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:43.898Z,1478862163.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:43.950Z,1478862163.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:44.299Z,1478862164.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:44.374Z,1478862164.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:44.698Z,1478862164.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:44.750Z,1478862164.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:45.150Z,1478862165.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:45.217Z,1478862165.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:45.500Z,1478862165.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:45.531Z,1478862165.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:45.910Z,1478862165.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:45.951Z,1478862165.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:46.295Z,1478862166.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:46.367Z,1478862166.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:46.716Z,1478862166.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:46.740Z,1478862166.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:47.100Z,1478862167.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:47.169Z,1478862167.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:47.512Z,1478862167.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:47.563Z,1478862167.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:47.895Z,1478862167.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:47.943Z,1478862167.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:48.295Z,1478862168.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:48.322Z,1478862168.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:48.693Z,1478862168.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:48.725Z,1478862168.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:49.100Z,1478862169.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:49.129Z,1478862169.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:49.495Z,1478862169.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:49.639Z,1478862169.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:49.896Z,1478862169.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:49.920Z,1478862169.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:50.293Z,1478862170.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:50.339Z,1478862170.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:50.693Z,1478862170.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:50.737Z,1478862170.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:51.104Z,1478862171.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:51.131Z,1478862171.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:51.494Z,1478862171.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:51.601Z,1478862171.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:51.900Z,1478862171.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:51.915Z,1478862171.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:52.295Z,1478862172.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:52.328Z,1478862172.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:52.694Z,1478862172.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:52.713Z,1478862172.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:53.101Z,1478862173.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:53.123Z,1478862173.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:53.493Z,1478862173.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:53.508Z,1478862173.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:53.897Z,1478862173.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:53.912Z,1478862173.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:54.296Z,1478862174.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:54.310Z,1478862174.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:54.693Z,1478862174.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:54.713Z,1478862174.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:55.118Z,1478862175.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:55.134Z,1478862175.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:55.497Z,1478862175.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:55.517Z,1478862175.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:55.895Z,1478862175.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:55.911Z,1478862175.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:56.297Z,1478862176.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:56.317Z,1478862176.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:56.697Z,1478862176.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:56.712Z,1478862176.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:57.098Z,1478862177.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:57.119Z,1478862177.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:57.498Z,1478862177.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:57.513Z,1478862177.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:57.897Z,1478862177.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:57.917Z,1478862177.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:58.297Z,1478862178.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:58.312Z,1478862178.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:58.693Z,1478862178.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:58.709Z,1478862178.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:59.105Z,1478862179.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:59.122Z,1478862179.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:59.497Z,1478862179.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:59.577Z,1478862179.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:02:59.897Z,1478862179.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:02:59.930Z,1478862179.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:00.297Z,1478862180.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:00.312Z,1478862180.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:00.693Z,1478862180.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:00.738Z,1478862180.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:01.097Z,1478862181.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:01.112Z,1478862181.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:01.493Z,1478862181.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:01.541Z,1478862181.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:01.897Z,1478862181.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:01.945Z,1478862181.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:02.297Z,1478862182.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:02.312Z,1478862182.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:02.697Z,1478862182.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:02.712Z,1478862182.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:03.093Z,1478862183.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:03.109Z,1478862183.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:03.497Z,1478862183.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:03.521Z,1478862183.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:03.893Z,1478862183.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:03.908Z,1478862183.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:04.297Z,1478862184.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:04.313Z,1478862184.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:04.693Z,1478862184.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:04.708Z,1478862184.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:05.097Z,1478862185.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:05.112Z,1478862185.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:05.497Z,1478862185.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:05.526Z,1478862185.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:05.893Z,1478862185.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:05.908Z,1478862185.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:06.290Z,1478862186.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:06.306Z,1478862186.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:06.693Z,1478862186.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:06.709Z,1478862186.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:07.097Z,1478862187.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:07.114Z,1478862187.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:07.493Z,1478862187.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:07.508Z,1478862187.508 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:07.508Z,1478862187.508 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 105
2016-11-11T11:03:07.508Z,1478862187.508 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:03:07.514Z,1478862187.514 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:07.515Z,1478862187.515 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 105
2016-11-11T11:03:07.515Z,1478862187.515 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:03:07.517Z,1478862187.517 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:07.517Z,1478862187.517 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 105
2016-11-11T11:03:07.517Z,1478862187.517 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:03:07.531Z,1478862187.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:03:07.531Z,1478862187.531 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:03:07.531Z,1478862187.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:03:07.898Z,1478862187.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:07.934Z,1478862187.934 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:03:07.934Z,1478862187.934 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 105
2016-11-11T11:03:07.934Z,1478862187.934 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:03:07.934Z,1478862187.934 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 105
2016-11-11T11:03:07.935Z,1478862187.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:03:07.935Z,1478862187.935 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 105
2016-11-11T11:03:08.298Z,1478862188.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:08.312Z,1478862188.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:03:08.312Z,1478862188.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:03:08.313Z,1478862188.313 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:03:08.317Z,1478862188.317 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:03:08.318Z,1478862188.318 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:03:08.318Z,1478862188.318 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:03:08.319Z,1478862188.319 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:03:08.319Z,1478862188.319 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:03:08.319Z,1478862188.319 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:03:08.698Z,1478862188.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:08.713Z,1478862188.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:09.101Z,1478862189.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:09.116Z,1478862189.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:09.498Z,1478862189.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:09.513Z,1478862189.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:09.897Z,1478862189.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:09.917Z,1478862189.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:10.298Z,1478862190.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:10.314Z,1478862190.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:10.701Z,1478862190.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:10.721Z,1478862190.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:11.101Z,1478862191.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:11.122Z,1478862191.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:11.497Z,1478862191.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:11.517Z,1478862191.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:11.898Z,1478862191.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:11.967Z,1478862191.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:12.298Z,1478862192.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:12.358Z,1478862192.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:12.699Z,1478862192.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:12.752Z,1478862192.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:13.098Z,1478862193.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:13.145Z,1478862193.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:13.494Z,1478862193.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:13.529Z,1478862193.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:13.895Z,1478862193.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:13.978Z,1478862193.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:14.294Z,1478862194.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:14.349Z,1478862194.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:14.694Z,1478862194.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:14.721Z,1478862194.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:15.095Z,1478862195.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:15.175Z,1478862195.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:15.494Z,1478862195.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:15.537Z,1478862195.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:15.894Z,1478862195.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:15.937Z,1478862195.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:16.295Z,1478862196.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:16.358Z,1478862196.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:16.697Z,1478862196.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:16.761Z,1478862196.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:17.094Z,1478862197.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:17.146Z,1478862197.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:17.502Z,1478862197.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:17.561Z,1478862197.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:17.895Z,1478862197.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:17.930Z,1478862197.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:18.294Z,1478862198.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:18.329Z,1478862198.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:18.695Z,1478862198.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:18.738Z,1478862198.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:19.094Z,1478862199.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:19.126Z,1478862199.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:28.187Z,1478862208.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:28.315Z,1478862208.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:28.418Z,1478862208.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:28.446Z,1478862208.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:28.805Z,1478862208.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:28.820Z,1478862208.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:29.220Z,1478862209.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:29.273Z,1478862209.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:29.610Z,1478862209.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:29.637Z,1478862209.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:30.009Z,1478862210.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:30.050Z,1478862210.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:30.401Z,1478862210.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:30.450Z,1478862210.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:30.805Z,1478862210.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:30.831Z,1478862210.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:31.216Z,1478862211.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:31.237Z,1478862211.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:31.601Z,1478862211.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:31.637Z,1478862211.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:32.001Z,1478862212.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:32.029Z,1478862212.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:32.401Z,1478862212.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:32.444Z,1478862212.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:32.801Z,1478862212.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:32.817Z,1478862212.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:33.201Z,1478862213.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:33.221Z,1478862213.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:33.609Z,1478862213.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:33.624Z,1478862213.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:34.007Z,1478862214.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:34.022Z,1478862214.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:34.405Z,1478862214.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:34.421Z,1478862214.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:34.811Z,1478862214.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:34.826Z,1478862214.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:35.207Z,1478862215.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:35.233Z,1478862215.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:35.609Z,1478862215.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:35.625Z,1478862215.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:36.009Z,1478862216.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:36.029Z,1478862216.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:36.409Z,1478862216.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:36.424Z,1478862216.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:36.809Z,1478862216.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:36.826Z,1478862216.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:37.217Z,1478862217.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:37.237Z,1478862217.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:37.601Z,1478862217.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:37.637Z,1478862217.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:38.009Z,1478862218.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:38.025Z,1478862218.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:38.401Z,1478862218.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:38.436Z,1478862218.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:38.801Z,1478862218.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:38.837Z,1478862218.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:39.209Z,1478862219.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:39.235Z,1478862219.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:39.609Z,1478862219.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:39.634Z,1478862219.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:40.000Z,1478862220.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:40.046Z,1478862220.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:40.401Z,1478862220.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:40.421Z,1478862220.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:40.801Z,1478862220.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:40.821Z,1478862220.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:41.213Z,1478862221.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:41.228Z,1478862221.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:41.608Z,1478862221.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:41.624Z,1478862221.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:42.009Z,1478862222.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:42.029Z,1478862222.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:42.408Z,1478862222.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:42.474Z,1478862222.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:42.801Z,1478862222.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:42.833Z,1478862222.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:43.217Z,1478862223.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:43.278Z,1478862223.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:43.601Z,1478862223.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:43.635Z,1478862223.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:44.001Z,1478862224.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:44.058Z,1478862224.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:44.332Z,1478862224.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:44.405Z,1478862224.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:44.454Z,1478862224.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:44.801Z,1478862224.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:44.829Z,1478862224.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:45.128Z,1478862225.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:45.201Z,1478862225.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:45.233Z,1478862225.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:45.601Z,1478862225.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:45.633Z,1478862225.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:46.001Z,1478862226.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:46.037Z,1478862226.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:46.401Z,1478862226.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:46.425Z,1478862226.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:46.805Z,1478862226.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:46.837Z,1478862226.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:47.201Z,1478862227.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:47.240Z,1478862227.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:47.601Z,1478862227.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:47.628Z,1478862227.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:48.005Z,1478862228.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:48.041Z,1478862228.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:48.405Z,1478862228.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:48.420Z,1478862228.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:48.809Z,1478862228.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:48.825Z,1478862228.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:49.216Z,1478862229.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:49.231Z,1478862229.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:49.612Z,1478862229.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:49.633Z,1478862229.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:50.012Z,1478862230.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:50.028Z,1478862230.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:50.401Z,1478862230.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:50.434Z,1478862230.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:50.801Z,1478862230.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:50.835Z,1478862230.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:51.216Z,1478862231.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:51.232Z,1478862231.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:51.601Z,1478862231.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:51.634Z,1478862231.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:52.001Z,1478862232.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:52.035Z,1478862232.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:52.405Z,1478862232.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:52.437Z,1478862232.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:52.805Z,1478862232.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:52.837Z,1478862232.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:53.212Z,1478862233.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:53.235Z,1478862233.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:53.601Z,1478862233.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:53.633Z,1478862233.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:54.005Z,1478862234.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:54.030Z,1478862234.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:54.401Z,1478862234.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:54.433Z,1478862234.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:54.805Z,1478862234.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:54.831Z,1478862234.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:55.212Z,1478862235.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:55.235Z,1478862235.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:55.601Z,1478862235.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:55.633Z,1478862235.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:56.001Z,1478862236.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:56.089Z,1478862236.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:56.405Z,1478862236.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:56.450Z,1478862236.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:56.801Z,1478862236.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:56.840Z,1478862236.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:57.209Z,1478862237.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:57.261Z,1478862237.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:57.601Z,1478862237.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:57.641Z,1478862237.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:58.001Z,1478862238.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:58.046Z,1478862238.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:58.401Z,1478862238.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:58.449Z,1478862238.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:58.801Z,1478862238.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:58.841Z,1478862238.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:59.201Z,1478862239.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:59.237Z,1478862239.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:03:59.601Z,1478862239.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:03:59.621Z,1478862239.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:00.012Z,1478862240.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:00.028Z,1478862240.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:00.408Z,1478862240.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:00.423Z,1478862240.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:00.812Z,1478862240.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:00.828Z,1478862240.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:01.216Z,1478862241.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:01.237Z,1478862241.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:01.601Z,1478862241.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:01.634Z,1478862241.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:02.008Z,1478862242.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:02.031Z,1478862242.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:02.408Z,1478862242.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:02.431Z,1478862242.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:02.798Z,1478862242.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:02.823Z,1478862242.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:03.201Z,1478862243.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:03.233Z,1478862243.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:03.605Z,1478862243.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:03.637Z,1478862243.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:04.001Z,1478862244.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:04.033Z,1478862244.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:04.401Z,1478862244.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:04.433Z,1478862244.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:04.805Z,1478862244.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:04.837Z,1478862244.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:05.201Z,1478862245.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:05.236Z,1478862245.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:05.601Z,1478862245.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:05.637Z,1478862245.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:06.001Z,1478862246.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:06.034Z,1478862246.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:06.401Z,1478862246.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:06.444Z,1478862246.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:06.805Z,1478862246.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:06.841Z,1478862246.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:07.209Z,1478862247.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:07.241Z,1478862247.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:07.605Z,1478862247.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:07.632Z,1478862247.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:08.001Z,1478862248.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:08.021Z,1478862248.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:08.405Z,1478862248.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:08.425Z,1478862248.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:08.809Z,1478862248.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:08.913Z,1478862248.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:09.216Z,1478862249.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:09.232Z,1478862249.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:09.601Z,1478862249.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:09.633Z,1478862249.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:10.001Z,1478862250.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:10.040Z,1478862250.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:10.401Z,1478862250.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:10.457Z,1478862250.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:10.801Z,1478862250.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:10.849Z,1478862250.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:11.206Z,1478862251.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:11.230Z,1478862251.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:11.608Z,1478862251.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:11.624Z,1478862251.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:12.009Z,1478862252.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:12.063Z,1478862252.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:12.408Z,1478862252.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:12.437Z,1478862252.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:12.809Z,1478862252.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:12.865Z,1478862252.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:13.212Z,1478862253.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:13.264Z,1478862253.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:13.608Z,1478862253.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:13.626Z,1478862253.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:14.008Z,1478862254.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:14.029Z,1478862254.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:14.408Z,1478862254.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:14.436Z,1478862254.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:14.811Z,1478862254.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:14.832Z,1478862254.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:15.201Z,1478862255.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:15.237Z,1478862255.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:15.601Z,1478862255.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:15.632Z,1478862255.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:16.010Z,1478862256.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:16.041Z,1478862256.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:16.401Z,1478862256.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:16.429Z,1478862256.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:16.801Z,1478862256.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:16.841Z,1478862256.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:17.201Z,1478862257.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:17.216Z,1478862257.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:17.601Z,1478862257.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:17.617Z,1478862257.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:18.006Z,1478862258.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:18.022Z,1478862258.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:18.408Z,1478862258.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:18.423Z,1478862258.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:18.807Z,1478862258.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:18.823Z,1478862258.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:19.209Z,1478862259.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:19.229Z,1478862259.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:22.570Z,1478862262.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:22.585Z,1478862262.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:22.695Z,1478862262.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:22.729Z,1478862262.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:23.083Z,1478862263.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:23.098Z,1478862263.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:23.471Z,1478862263.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:23.493Z,1478862263.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:23.871Z,1478862263.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:23.906Z,1478862263.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:24.271Z,1478862264.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:24.297Z,1478862264.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:24.671Z,1478862264.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:24.701Z,1478862264.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:25.087Z,1478862265.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:25.177Z,1478862265.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:25.475Z,1478862265.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:25.533Z,1478862265.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:25.871Z,1478862265.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:25.886Z,1478862265.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:26.271Z,1478862266.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:26.322Z,1478862266.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:26.675Z,1478862266.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:26.690Z,1478862266.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:27.078Z,1478862267.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:27.125Z,1478862267.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:27.479Z,1478862267.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:27.537Z,1478862267.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:27.880Z,1478862267.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:27.903Z,1478862267.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:28.304Z,1478862268.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:28.339Z,1478862268.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:28.686Z,1478862268.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:28.731Z,1478862268.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:29.076Z,1478862269.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:29.100Z,1478862269.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:29.480Z,1478862269.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:29.515Z,1478862269.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:29.877Z,1478862269.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:29.909Z,1478862269.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:30.276Z,1478862270.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:30.307Z,1478862270.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:30.672Z,1478862270.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:30.718Z,1478862270.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:31.078Z,1478862271.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:31.102Z,1478862271.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:31.483Z,1478862271.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:31.498Z,1478862271.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:31.913Z,1478862271.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:31.940Z,1478862271.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:32.276Z,1478862272.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:32.291Z,1478862272.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:32.686Z,1478862272.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:32.702Z,1478862272.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:33.093Z,1478862273.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:33.133Z,1478862273.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:33.499Z,1478862273.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:33.539Z,1478862273.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:33.888Z,1478862273.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:33.911Z,1478862273.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:34.271Z,1478862274.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:34.305Z,1478862274.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:34.686Z,1478862274.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:34.702Z,1478862274.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:35.079Z,1478862275.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:35.105Z,1478862275.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:35.473Z,1478862275.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:35.499Z,1478862275.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:35.871Z,1478862275.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:35.906Z,1478862275.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:36.271Z,1478862276.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:36.305Z,1478862276.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:36.675Z,1478862276.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:36.704Z,1478862276.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:37.079Z,1478862277.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:37.105Z,1478862277.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:37.479Z,1478862277.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:37.506Z,1478862277.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:37.875Z,1478862277.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:37.910Z,1478862277.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:38.275Z,1478862278.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:38.306Z,1478862278.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:38.671Z,1478862278.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:38.687Z,1478862278.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:39.092Z,1478862279.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:39.159Z,1478862279.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:39.483Z,1478862279.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:39.499Z,1478862279.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:39.879Z,1478862279.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:39.934Z,1478862279.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:40.280Z,1478862280.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:40.307Z,1478862280.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:40.681Z,1478862280.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:40.697Z,1478862280.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:41.080Z,1478862281.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:41.127Z,1478862281.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:41.481Z,1478862281.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:41.501Z,1478862281.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:41.879Z,1478862281.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:41.932Z,1478862281.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:42.271Z,1478862282.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:42.335Z,1478862282.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:42.671Z,1478862282.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:42.706Z,1478862282.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:43.071Z,1478862283.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:43.108Z,1478862283.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:43.471Z,1478862283.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:43.498Z,1478862283.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:43.871Z,1478862283.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:43.898Z,1478862283.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:44.275Z,1478862284.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:44.312Z,1478862284.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:44.701Z,1478862284.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:44.753Z,1478862284.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:45.080Z,1478862285.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:45.123Z,1478862285.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:45.474Z,1478862285.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:45.489Z,1478862285.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:45.878Z,1478862285.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:45.909Z,1478862285.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:46.284Z,1478862286.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:46.299Z,1478862286.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:46.678Z,1478862286.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:46.694Z,1478862286.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:47.083Z,1478862287.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:47.098Z,1478862287.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:47.486Z,1478862287.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:47.501Z,1478862287.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:47.887Z,1478862287.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:47.903Z,1478862287.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:48.296Z,1478862288.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:48.344Z,1478862288.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:48.670Z,1478862288.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:48.704Z,1478862288.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:49.090Z,1478862289.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:49.112Z,1478862289.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:49.484Z,1478862289.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:49.514Z,1478862289.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:49.892Z,1478862289.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:49.930Z,1478862289.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:50.276Z,1478862290.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:50.313Z,1478862290.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:50.671Z,1478862290.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:50.686Z,1478862290.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:51.083Z,1478862291.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:51.114Z,1478862291.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:51.471Z,1478862291.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:51.487Z,1478862291.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:51.873Z,1478862291.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:51.893Z,1478862291.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:52.278Z,1478862292.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:52.323Z,1478862292.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:52.674Z,1478862292.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:52.690Z,1478862292.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:53.085Z,1478862293.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:53.121Z,1478862293.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:53.478Z,1478862293.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:53.487Z,1478862293.487 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T11:04:53.487Z,1478862293.487 [BPC1] Data Fault, FailCount= 1
2016-11-11T11:04:53.487Z,1478862293.487 [BPC1](ERROR): Data Fault
2016-11-11T11:04:53.495Z,1478862293.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:53.544Z,1478862293.544 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T11:04:53.882Z,1478862293.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:53.898Z,1478862293.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:54.277Z,1478862294.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:54.304Z,1478862294.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:54.678Z,1478862294.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:54.693Z,1478862294.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:54.713Z,1478862294.713 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:04:54.713Z,1478862294.713 [BPC1] No Fault, FailCount= 1
2016-11-11T11:04:55.082Z,1478862295.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:55.157Z,1478862295.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:55.471Z,1478862295.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:55.531Z,1478862295.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:55.871Z,1478862295.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:55.901Z,1478862295.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:56.271Z,1478862296.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:56.307Z,1478862296.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:56.671Z,1478862296.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:56.702Z,1478862296.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:57.071Z,1478862297.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:57.105Z,1478862297.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:57.471Z,1478862297.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:57.510Z,1478862297.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:57.871Z,1478862297.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:57.895Z,1478862297.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:58.271Z,1478862298.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:58.309Z,1478862298.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:58.671Z,1478862298.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:58.686Z,1478862298.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:59.071Z,1478862299.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:59.086Z,1478862299.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:59.475Z,1478862299.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:59.491Z,1478862299.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:04:59.877Z,1478862299.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:04:59.892Z,1478862299.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:00.278Z,1478862300.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:00.293Z,1478862300.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:00.681Z,1478862300.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:00.701Z,1478862300.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:01.104Z,1478862301.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:01.136Z,1478862301.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:01.484Z,1478862301.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:01.514Z,1478862301.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:01.877Z,1478862301.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:01.900Z,1478862301.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:02.281Z,1478862302.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:02.297Z,1478862302.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:02.685Z,1478862302.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:02.700Z,1478862302.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:03.071Z,1478862303.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:03.097Z,1478862303.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:03.471Z,1478862303.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:03.507Z,1478862303.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:03.878Z,1478862303.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:03.913Z,1478862303.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:04.291Z,1478862304.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:04.306Z,1478862304.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:04.692Z,1478862304.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:04.730Z,1478862304.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:05.078Z,1478862305.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:05.113Z,1478862305.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:05.486Z,1478862305.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:05.502Z,1478862305.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:05.888Z,1478862305.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:05.911Z,1478862305.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:06.295Z,1478862306.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:06.329Z,1478862306.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:06.692Z,1478862306.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:06.708Z,1478862306.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:07.079Z,1478862307.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:07.102Z,1478862307.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:07.476Z,1478862307.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:07.533Z,1478862307.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:07.875Z,1478862307.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:07.944Z,1478862307.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:08.266Z,1478862308.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:08.297Z,1478862308.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:08.677Z,1478862308.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:08.697Z,1478862308.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:09.079Z,1478862309.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:09.127Z,1478862309.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:09.478Z,1478862309.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:09.494Z,1478862309.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:09.878Z,1478862309.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:09.933Z,1478862309.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:10.274Z,1478862310.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:10.329Z,1478862310.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:10.676Z,1478862310.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:10.699Z,1478862310.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:11.078Z,1478862311.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:11.097Z,1478862311.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:11.486Z,1478862311.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:11.502Z,1478862311.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:11.871Z,1478862311.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:11.903Z,1478862311.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:12.271Z,1478862312.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:12.305Z,1478862312.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:12.675Z,1478862312.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:12.701Z,1478862312.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:13.071Z,1478862313.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:13.102Z,1478862313.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:13.471Z,1478862313.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:13.509Z,1478862313.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:13.870Z,1478862313.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:13.886Z,1478862313.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:14.271Z,1478862314.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:14.286Z,1478862314.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:14.671Z,1478862314.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:14.693Z,1478862314.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:15.071Z,1478862315.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:15.087Z,1478862315.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:15.477Z,1478862315.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:15.493Z,1478862315.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:15.880Z,1478862315.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:15.895Z,1478862315.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:16.273Z,1478862316.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:16.293Z,1478862316.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:16.679Z,1478862316.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:16.694Z,1478862316.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:17.092Z,1478862317.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:17.107Z,1478862317.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:17.492Z,1478862317.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:17.545Z,1478862317.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:17.876Z,1478862317.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:17.919Z,1478862317.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:18.273Z,1478862318.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:18.310Z,1478862318.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:18.677Z,1478862318.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:18.704Z,1478862318.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:19.077Z,1478862319.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:19.104Z,1478862319.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:19.480Z,1478862319.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:19.507Z,1478862319.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:23.005Z,1478862323.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:23.101Z,1478862323.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:23.202Z,1478862323.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:23.236Z,1478862323.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:23.585Z,1478862323.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:23.613Z,1478862323.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:23.981Z,1478862323.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:24.027Z,1478862324.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:24.377Z,1478862324.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:24.392Z,1478862324.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:24.781Z,1478862324.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:24.842Z,1478862324.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:25.181Z,1478862325.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:25.236Z,1478862325.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:25.577Z,1478862325.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:25.597Z,1478862325.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:25.981Z,1478862325.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:26.001Z,1478862326.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:26.381Z,1478862326.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:26.401Z,1478862326.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:26.785Z,1478862326.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:26.800Z,1478862326.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:27.189Z,1478862327.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:27.212Z,1478862327.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:27.577Z,1478862327.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:27.610Z,1478862327.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:27.977Z,1478862327.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:28.009Z,1478862328.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:28.381Z,1478862328.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:28.419Z,1478862328.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:28.777Z,1478862328.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:28.812Z,1478862328.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:29.177Z,1478862329.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:29.217Z,1478862329.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:29.577Z,1478862329.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:29.597Z,1478862329.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:29.981Z,1478862329.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:30.001Z,1478862330.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:30.375Z,1478862330.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:30.408Z,1478862330.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:30.785Z,1478862330.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:30.801Z,1478862330.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:31.177Z,1478862331.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:31.213Z,1478862331.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:31.577Z,1478862331.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:31.625Z,1478862331.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:31.982Z,1478862331.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:31.999Z,1478862331.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:32.377Z,1478862332.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:32.394Z,1478862332.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:32.781Z,1478862332.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:32.798Z,1478862332.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:33.189Z,1478862333.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:33.205Z,1478862333.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:33.583Z,1478862333.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:33.614Z,1478862333.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:33.984Z,1478862333.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:34.008Z,1478862334.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:34.377Z,1478862334.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:34.410Z,1478862334.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:34.777Z,1478862334.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:34.818Z,1478862334.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:35.185Z,1478862335.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:35.214Z,1478862335.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:35.577Z,1478862335.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:35.609Z,1478862335.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:35.981Z,1478862335.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:36.014Z,1478862336.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:36.377Z,1478862336.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:36.413Z,1478862336.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:36.781Z,1478862336.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:36.817Z,1478862336.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:37.181Z,1478862337.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:37.236Z,1478862337.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:37.577Z,1478862337.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:37.602Z,1478862337.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:37.977Z,1478862337.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:38.015Z,1478862338.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:38.377Z,1478862338.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:38.413Z,1478862338.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:38.777Z,1478862338.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:38.803Z,1478862338.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:39.177Z,1478862339.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:39.212Z,1478862339.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:39.584Z,1478862339.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:39.609Z,1478862339.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:39.984Z,1478862339.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:40.004Z,1478862340.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:40.384Z,1478862340.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:40.392Z,1478862340.392 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:05:40.392Z,1478862340.392 [BPC1] Communications Fault, FailCount= 1
2016-11-11T11:05:40.392Z,1478862340.392 [BPC1](ERROR): Communications Fault
2016-11-11T11:05:40.405Z,1478862340.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:40.458Z,1478862340.458 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:05:40.784Z,1478862340.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:40.799Z,1478862340.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:41.177Z,1478862341.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:41.211Z,1478862341.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:41.577Z,1478862341.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:41.612Z,1478862341.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:41.632Z,1478862341.632 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:05:41.632Z,1478862341.632 [BPC1] No Fault, FailCount= 1
2016-11-11T11:05:41.977Z,1478862341.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:42.065Z,1478862342.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:42.377Z,1478862342.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:42.413Z,1478862342.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:42.777Z,1478862342.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:42.841Z,1478862342.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:43.190Z,1478862343.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:43.207Z,1478862343.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:43.584Z,1478862343.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:43.621Z,1478862343.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:43.984Z,1478862343.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:44.008Z,1478862344.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:44.384Z,1478862344.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:44.404Z,1478862344.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:44.777Z,1478862344.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:44.870Z,1478862344.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:45.181Z,1478862345.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:45.216Z,1478862345.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:45.585Z,1478862345.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:45.633Z,1478862345.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:45.977Z,1478862345.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:46.003Z,1478862346.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:46.377Z,1478862346.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:46.396Z,1478862346.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:46.780Z,1478862346.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:46.853Z,1478862346.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:47.184Z,1478862347.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:47.202Z,1478862347.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:47.584Z,1478862347.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:47.603Z,1478862347.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:47.988Z,1478862347.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:48.014Z,1478862348.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:48.385Z,1478862348.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:48.419Z,1478862348.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:48.777Z,1478862348.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:48.815Z,1478862348.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:49.194Z,1478862349.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:49.214Z,1478862349.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:49.578Z,1478862349.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:49.606Z,1478862349.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:49.977Z,1478862349.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:50.053Z,1478862350.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:50.393Z,1478862350.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:50.402Z,1478862350.402 [PNI_TCM](ERROR): CRC does not match. Expected:0x29488 got:0x57344
2016-11-11T11:05:50.429Z,1478862350.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:50.777Z,1478862350.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:50.806Z,1478862350.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:51.179Z,1478862351.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:51.216Z,1478862351.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:51.577Z,1478862351.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:51.622Z,1478862351.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:51.977Z,1478862351.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:51.995Z,1478862351.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:52.384Z,1478862352.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:52.401Z,1478862352.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:52.786Z,1478862352.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:52.802Z,1478862352.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:53.180Z,1478862353.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:53.213Z,1478862353.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:53.590Z,1478862353.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:53.688Z,1478862353.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:53.982Z,1478862353.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:54.006Z,1478862354.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:54.395Z,1478862354.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:54.410Z,1478862354.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:54.777Z,1478862354.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:54.864Z,1478862354.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:54.907Z,1478862354.907 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T11:05:55.177Z,1478862355.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:55.211Z,1478862355.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:55.578Z,1478862355.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:55.606Z,1478862355.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:55.979Z,1478862355.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:56.014Z,1478862356.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:56.381Z,1478862356.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:56.421Z,1478862356.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:56.782Z,1478862356.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:56.813Z,1478862356.813 [PNI_TCM](ERROR): CRC does not match. Expected:0x30600 got:0x16913
2016-11-11T11:05:56.862Z,1478862356.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:57.187Z,1478862357.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:57.202Z,1478862357.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:57.581Z,1478862357.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:57.605Z,1478862357.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:57.984Z,1478862357.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:58.041Z,1478862358.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:58.386Z,1478862358.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:58.394Z,1478862358.394 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16829
2016-11-11T11:05:58.421Z,1478862358.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:58.813Z,1478862358.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:58.868Z,1478862358.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:59.179Z,1478862359.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:59.213Z,1478862359.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:59.577Z,1478862359.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:05:59.612Z,1478862359.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:05:59.978Z,1478862359.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:00.006Z,1478862360.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:00.379Z,1478862360.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:00.407Z,1478862360.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:00.787Z,1478862360.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:00.820Z,1478862360.820 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:06:00.820Z,1478862360.820 [BPC1] Communications Fault, FailCount= 2
2016-11-11T11:06:00.821Z,1478862360.820 [BPC1](ERROR): Communications Fault
2016-11-11T11:06:00.858Z,1478862360.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:00.915Z,1478862360.915 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:06:01.185Z,1478862361.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:01.225Z,1478862361.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:01.585Z,1478862361.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:01.592Z,1478862361.592 [PNI_TCM](ERROR): CRC does not match. Expected:0x1553 got:0x16863
2016-11-11T11:06:01.626Z,1478862361.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:01.987Z,1478862361.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:02.002Z,1478862362.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:02.047Z,1478862362.047 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:06:02.047Z,1478862362.047 [BPC1] No Fault, FailCount= 2
2016-11-11T11:06:02.382Z,1478862362.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:02.463Z,1478862362.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:02.783Z,1478862362.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:02.846Z,1478862362.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:03.186Z,1478862363.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:03.193Z,1478862363.193 [PNI_TCM](ERROR): CRC does not match. Expected:0x27172 got:0x153
2016-11-11T11:06:03.221Z,1478862363.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:03.579Z,1478862363.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:03.605Z,1478862363.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:03.981Z,1478862363.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:04.013Z,1478862364.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:04.377Z,1478862364.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:04.410Z,1478862364.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:04.791Z,1478862364.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:04.807Z,1478862364.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:05.179Z,1478862365.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:05.214Z,1478862365.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:05.581Z,1478862365.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:05.601Z,1478862365.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:05.992Z,1478862365.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:06.038Z,1478862366.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:06.384Z,1478862366.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:06.408Z,1478862366.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:06.786Z,1478862366.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:06.801Z,1478862366.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:07.184Z,1478862367.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:07.212Z,1478862367.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:07.578Z,1478862367.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:07.608Z,1478862367.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:07.979Z,1478862367.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:07.997Z,1478862367.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:08.385Z,1478862368.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:08.405Z,1478862368.405 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:08.405Z,1478862368.405 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 106
2016-11-11T11:06:08.406Z,1478862368.406 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:06:08.433Z,1478862368.433 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:08.433Z,1478862368.433 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 106
2016-11-11T11:06:08.433Z,1478862368.433 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:06:08.439Z,1478862368.439 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:08.439Z,1478862368.439 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 106
2016-11-11T11:06:08.439Z,1478862368.439 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:06:08.466Z,1478862368.466 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:06:08.467Z,1478862368.467 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:06:08.471Z,1478862368.471 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:06:08.828Z,1478862368.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:08.897Z,1478862368.897 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:06:08.897Z,1478862368.897 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 106
2016-11-11T11:06:08.898Z,1478862368.898 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:06:08.898Z,1478862368.898 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 106
2016-11-11T11:06:08.899Z,1478862368.899 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:06:08.899Z,1478862368.899 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 106
2016-11-11T11:06:09.184Z,1478862369.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:09.204Z,1478862369.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:06:09.205Z,1478862369.205 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:06:09.205Z,1478862369.205 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:06:09.210Z,1478862369.210 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:06:09.211Z,1478862369.211 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:06:09.227Z,1478862369.227 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:06:09.228Z,1478862369.228 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:06:09.228Z,1478862369.228 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:06:09.228Z,1478862369.228 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:06:09.587Z,1478862369.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:09.602Z,1478862369.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:09.984Z,1478862369.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:10.015Z,1478862370.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:10.384Z,1478862370.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:10.417Z,1478862370.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:10.824Z,1478862370.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:10.873Z,1478862370.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:11.180Z,1478862371.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:11.216Z,1478862371.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:11.577Z,1478862371.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:11.615Z,1478862371.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:11.977Z,1478862371.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:12.022Z,1478862372.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:12.379Z,1478862372.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:12.415Z,1478862372.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:12.823Z,1478862372.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:12.859Z,1478862372.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:13.180Z,1478862373.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:13.196Z,1478862373.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:13.581Z,1478862373.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:13.641Z,1478862373.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:13.987Z,1478862373.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:14.002Z,1478862374.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:14.385Z,1478862374.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:14.401Z,1478862374.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:14.794Z,1478862374.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:14.870Z,1478862374.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:15.177Z,1478862375.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:15.213Z,1478862375.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:15.579Z,1478862375.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:15.629Z,1478862375.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:15.978Z,1478862375.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:16.010Z,1478862376.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:16.377Z,1478862376.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:16.423Z,1478862376.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:16.777Z,1478862376.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:16.820Z,1478862376.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:17.190Z,1478862377.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:17.214Z,1478862377.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:17.584Z,1478862377.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:17.599Z,1478862377.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:17.983Z,1478862377.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:18.005Z,1478862378.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:18.088Z,1478862378.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:18.383Z,1478862378.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:18.398Z,1478862378.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:18.407Z,1478862378.407 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T11:06:18.408Z,1478862378.408 [Default:CheckIn:C.Wait] Stopped
2016-11-11T11:06:18.408Z,1478862378.408 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T11:06:18.408Z,1478862378.408 [Default:CheckIn:D] Running Loop=1
2016-11-11T11:06:18.786Z,1478862378.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:18.801Z,1478862378.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:18.828Z,1478862378.828 [Default:CheckIn:D] Stopped
2016-11-11T11:06:18.828Z,1478862378.828 [Default:CheckIn:E] Running Loop=1
2016-11-11T11:06:18.884Z,1478862378.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:19.184Z,1478862379.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:19.199Z,1478862379.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:19.269Z,1478862379.270 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 376.291960 min 
2016-11-11T11:06:19.270Z,1478862379.270 [Default:CheckIn:E] Stopped
2016-11-11T11:06:19.270Z,1478862379.270 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T11:06:19.270Z,1478862379.270 [Default:CheckIn] Stopped
2016-11-11T11:06:19.270Z,1478862379.270 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T11:06:19.270Z,1478862379.270 [Default:CheckIn](INFO): Running loop #37
2016-11-11T11:06:19.271Z,1478862379.270 [Default:CheckIn] Running Loop=37
2016-11-11T11:06:19.271Z,1478862379.271 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T11:06:19.271Z,1478862379.271 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T11:06:19.577Z,1478862379.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:19.613Z,1478862379.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:23.160Z,1478862383.160 [NAL9602](INFO): Powering up
2016-11-11T11:06:23.178Z,1478862383.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:23.210Z,1478862383.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:23.298Z,1478862383.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:23.331Z,1478862383.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:23.685Z,1478862383.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:23.705Z,1478862383.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:24.085Z,1478862384.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:24.105Z,1478862384.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:24.485Z,1478862384.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:24.500Z,1478862384.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:24.897Z,1478862384.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:24.913Z,1478862384.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:25.288Z,1478862385.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:25.308Z,1478862385.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:25.696Z,1478862385.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:25.712Z,1478862385.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:26.092Z,1478862386.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:26.107Z,1478862386.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:26.488Z,1478862386.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:26.511Z,1478862386.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:26.900Z,1478862386.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:26.921Z,1478862386.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:27.292Z,1478862387.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:27.313Z,1478862387.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:27.693Z,1478862387.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:27.733Z,1478862387.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:28.085Z,1478862388.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:28.149Z,1478862388.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:28.485Z,1478862388.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:28.521Z,1478862388.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:28.885Z,1478862388.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:28.917Z,1478862388.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:29.285Z,1478862389.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:29.333Z,1478862389.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:29.685Z,1478862389.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:29.721Z,1478862389.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:30.085Z,1478862390.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:30.130Z,1478862390.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:30.485Z,1478862390.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:30.533Z,1478862390.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:30.915Z,1478862390.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:30.977Z,1478862390.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:31.293Z,1478862391.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:31.313Z,1478862391.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:31.693Z,1478862391.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:31.708Z,1478862391.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:32.097Z,1478862392.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:32.113Z,1478862392.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:32.493Z,1478862392.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:32.513Z,1478862392.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:32.886Z,1478862392.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:32.921Z,1478862392.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:33.285Z,1478862393.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:33.318Z,1478862393.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:33.711Z,1478862393.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:33.727Z,1478862393.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:34.069Z,1478862394.069 [NAL9602](INFO): NAL9602 initialized
2016-11-11T11:06:34.086Z,1478862394.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:34.122Z,1478862394.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:34.485Z,1478862394.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:34.521Z,1478862394.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:34.869Z,1478862394.869 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T11:06:34.869Z,1478862394.869 [NAL9602] Data Fault, FailCount= 2
2016-11-11T11:06:34.869Z,1478862394.869 [NAL9602](ERROR): Data Fault
2016-11-11T11:06:34.886Z,1478862394.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:34.925Z,1478862394.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:34.957Z,1478862394.957 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T11:06:35.281Z,1478862395.281 [NAL9602](INFO): Powering down
2016-11-11T11:06:35.298Z,1478862395.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:35.330Z,1478862395.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:35.692Z,1478862395.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:35.707Z,1478862395.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:36.092Z,1478862396.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:36.107Z,1478862396.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:36.146Z,1478862396.146 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T11:06:36.146Z,1478862396.146 [NAL9602] No Fault, FailCount= 2
2016-11-11T11:06:36.492Z,1478862396.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:36.507Z,1478862396.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:36.892Z,1478862396.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:36.907Z,1478862396.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:37.296Z,1478862397.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:37.312Z,1478862397.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:37.692Z,1478862397.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:37.708Z,1478862397.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:38.093Z,1478862398.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:38.108Z,1478862398.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:38.500Z,1478862398.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:38.515Z,1478862398.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:38.901Z,1478862398.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:38.916Z,1478862398.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:39.296Z,1478862399.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:39.312Z,1478862399.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:39.685Z,1478862399.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:39.710Z,1478862399.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:40.085Z,1478862400.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:40.117Z,1478862400.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:40.469Z,1478862400.469 [NAL9602](INFO): Powering up NAL9602
2016-11-11T11:06:40.486Z,1478862400.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:40.529Z,1478862400.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:40.885Z,1478862400.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:40.921Z,1478862400.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:41.289Z,1478862401.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:41.349Z,1478862401.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:41.685Z,1478862401.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:41.729Z,1478862401.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:42.085Z,1478862402.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:42.149Z,1478862402.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:42.486Z,1478862402.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:42.510Z,1478862402.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:42.897Z,1478862402.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:42.947Z,1478862402.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:43.292Z,1478862403.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:43.313Z,1478862403.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:43.688Z,1478862403.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:43.735Z,1478862403.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:44.092Z,1478862404.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:44.139Z,1478862404.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:44.492Z,1478862404.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:44.507Z,1478862404.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:44.901Z,1478862404.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:44.921Z,1478862404.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:45.288Z,1478862405.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:45.314Z,1478862405.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:45.696Z,1478862405.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:45.711Z,1478862405.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:46.088Z,1478862406.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:46.120Z,1478862406.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:46.493Z,1478862406.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:46.513Z,1478862406.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:46.888Z,1478862406.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:46.912Z,1478862406.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:47.301Z,1478862407.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:47.316Z,1478862407.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:47.685Z,1478862407.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:47.719Z,1478862407.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:48.085Z,1478862408.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:48.119Z,1478862408.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:48.497Z,1478862408.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:48.512Z,1478862408.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:48.885Z,1478862408.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:48.910Z,1478862408.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:49.285Z,1478862409.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:49.317Z,1478862409.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:49.685Z,1478862409.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:49.717Z,1478862409.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:50.089Z,1478862410.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:50.121Z,1478862410.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:50.485Z,1478862410.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:50.526Z,1478862410.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:50.901Z,1478862410.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:50.916Z,1478862410.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:51.304Z,1478862411.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:51.332Z,1478862411.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:51.669Z,1478862411.669 [NAL9602](INFO): NAL9602 initialized
2016-11-11T11:06:51.686Z,1478862411.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:51.725Z,1478862411.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:52.086Z,1478862412.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:52.125Z,1478862412.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:52.496Z,1478862412.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:52.530Z,1478862412.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:52.915Z,1478862412.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:52.931Z,1478862412.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:53.304Z,1478862413.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:53.336Z,1478862413.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:53.685Z,1478862413.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:53.721Z,1478862413.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:54.090Z,1478862414.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:54.125Z,1478862414.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:54.517Z,1478862414.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:54.532Z,1478862414.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:54.901Z,1478862414.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:54.941Z,1478862414.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:55.290Z,1478862415.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:55.349Z,1478862415.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:55.691Z,1478862415.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:55.719Z,1478862415.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:56.088Z,1478862416.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:56.141Z,1478862416.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:56.486Z,1478862416.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:56.529Z,1478862416.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:56.895Z,1478862416.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:56.957Z,1478862416.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:57.290Z,1478862417.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:57.316Z,1478862417.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:57.685Z,1478862417.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:57.737Z,1478862417.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:58.086Z,1478862418.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:58.118Z,1478862418.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:58.485Z,1478862418.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:58.533Z,1478862418.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:58.886Z,1478862418.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:58.926Z,1478862418.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:59.294Z,1478862419.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:59.314Z,1478862419.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:06:59.697Z,1478862419.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:06:59.718Z,1478862419.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:00.097Z,1478862420.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:00.117Z,1478862420.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:00.494Z,1478862420.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:00.509Z,1478862420.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:00.896Z,1478862420.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:00.917Z,1478862420.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:01.285Z,1478862421.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:01.322Z,1478862421.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:01.693Z,1478862421.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:01.716Z,1478862421.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:02.111Z,1478862422.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:02.126Z,1478862422.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:02.503Z,1478862422.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:02.525Z,1478862422.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:02.886Z,1478862422.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:02.913Z,1478862422.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:03.294Z,1478862423.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:03.325Z,1478862423.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:03.693Z,1478862423.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:03.725Z,1478862423.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:04.086Z,1478862424.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:04.101Z,1478862424.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:04.485Z,1478862424.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:04.505Z,1478862424.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:04.885Z,1478862424.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:04.905Z,1478862424.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:05.289Z,1478862425.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:05.309Z,1478862425.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:05.692Z,1478862425.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:05.707Z,1478862425.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:06.092Z,1478862426.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:06.107Z,1478862426.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:06.500Z,1478862426.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:06.515Z,1478862426.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:06.908Z,1478862426.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:06.924Z,1478862426.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:07.297Z,1478862427.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:07.312Z,1478862427.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:07.694Z,1478862427.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:07.710Z,1478862427.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:08.100Z,1478862428.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:08.116Z,1478862428.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:08.485Z,1478862428.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:08.517Z,1478862428.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:08.902Z,1478862428.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:08.918Z,1478862428.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:09.290Z,1478862429.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:09.353Z,1478862429.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:09.685Z,1478862429.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:09.721Z,1478862429.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:10.086Z,1478862430.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:10.166Z,1478862430.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:10.485Z,1478862430.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:10.505Z,1478862430.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:10.897Z,1478862430.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:10.953Z,1478862430.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:11.294Z,1478862431.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:11.309Z,1478862431.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:11.694Z,1478862431.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:11.743Z,1478862431.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:12.093Z,1478862432.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:12.139Z,1478862432.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:12.489Z,1478862432.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:12.504Z,1478862432.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:12.897Z,1478862432.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:12.917Z,1478862432.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:13.292Z,1478862433.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:13.313Z,1478862433.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:13.692Z,1478862433.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:13.721Z,1478862433.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:14.089Z,1478862434.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:14.112Z,1478862434.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:14.493Z,1478862434.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:14.513Z,1478862434.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:14.892Z,1478862434.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:14.914Z,1478862434.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:15.308Z,1478862435.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:15.324Z,1478862435.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:15.703Z,1478862435.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:15.725Z,1478862435.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:16.086Z,1478862436.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:16.118Z,1478862436.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:16.493Z,1478862436.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:16.519Z,1478862436.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:16.889Z,1478862436.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:16.921Z,1478862436.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:17.285Z,1478862437.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:17.317Z,1478862437.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:17.686Z,1478862437.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:17.714Z,1478862437.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:18.089Z,1478862438.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:18.104Z,1478862438.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:18.489Z,1478862438.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:18.505Z,1478862438.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:18.897Z,1478862438.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:18.913Z,1478862438.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:19.300Z,1478862439.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:19.337Z,1478862439.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:19.690Z,1478862439.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:19.718Z,1478862439.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:23.153Z,1478862443.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:23.209Z,1478862443.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:23.305Z,1478862443.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:23.333Z,1478862443.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:23.681Z,1478862443.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:23.713Z,1478862443.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:24.081Z,1478862444.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:24.141Z,1478862444.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:24.481Z,1478862444.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:24.509Z,1478862444.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:24.890Z,1478862444.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:24.942Z,1478862444.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:25.281Z,1478862445.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:25.301Z,1478862445.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:25.684Z,1478862445.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:25.730Z,1478862445.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:26.089Z,1478862446.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:26.141Z,1478862446.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:26.486Z,1478862446.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:26.507Z,1478862446.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:26.893Z,1478862446.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:26.913Z,1478862446.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:27.293Z,1478862447.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:27.308Z,1478862447.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:27.689Z,1478862447.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:27.709Z,1478862447.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:28.084Z,1478862448.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:28.116Z,1478862448.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:28.481Z,1478862448.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:28.521Z,1478862448.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:28.885Z,1478862448.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:28.911Z,1478862448.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:29.281Z,1478862449.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:29.313Z,1478862449.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:29.686Z,1478862449.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:29.725Z,1478862449.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:30.081Z,1478862450.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:30.117Z,1478862450.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:30.485Z,1478862450.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:30.513Z,1478862450.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:30.882Z,1478862450.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:30.897Z,1478862450.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:31.282Z,1478862451.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:31.302Z,1478862451.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:31.684Z,1478862451.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:31.717Z,1478862451.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:32.085Z,1478862452.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:32.109Z,1478862452.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:32.484Z,1478862452.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:32.517Z,1478862452.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:32.882Z,1478862452.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:32.910Z,1478862452.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:33.270Z,1478862453.270 [NAL9602](INFO): SBD MO Status=2, MOMSN=344, MT Status=2, MTMSN=0
2016-11-11T11:07:33.271Z,1478862453.270 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T11:07:33.292Z,1478862453.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:33.321Z,1478862453.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:33.696Z,1478862453.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:33.728Z,1478862453.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:34.081Z,1478862454.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:34.113Z,1478862454.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:34.481Z,1478862454.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:34.517Z,1478862454.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:34.889Z,1478862454.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:34.926Z,1478862454.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:35.281Z,1478862455.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:35.318Z,1478862455.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:35.682Z,1478862455.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:35.702Z,1478862455.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:36.081Z,1478862456.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:36.101Z,1478862456.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:36.485Z,1478862456.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:36.537Z,1478862456.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:36.881Z,1478862456.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:36.914Z,1478862456.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:37.292Z,1478862457.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:37.312Z,1478862457.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:37.729Z,1478862457.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:37.745Z,1478862457.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:38.094Z,1478862458.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:38.181Z,1478862458.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:38.489Z,1478862458.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:38.514Z,1478862458.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:38.882Z,1478862458.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:38.930Z,1478862458.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:39.287Z,1478862459.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:39.358Z,1478862459.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:39.692Z,1478862459.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:39.748Z,1478862459.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:40.089Z,1478862460.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:40.146Z,1478862460.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:40.491Z,1478862460.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:40.550Z,1478862460.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:40.891Z,1478862460.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:40.915Z,1478862460.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:41.283Z,1478862461.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:41.318Z,1478862461.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:41.683Z,1478862461.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:41.718Z,1478862461.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:42.099Z,1478862462.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:42.144Z,1478862462.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:42.495Z,1478862462.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:42.519Z,1478862462.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:42.893Z,1478862462.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:42.922Z,1478862462.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:43.283Z,1478862463.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:43.317Z,1478862463.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:43.683Z,1478862463.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:43.698Z,1478862463.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:44.082Z,1478862464.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:44.133Z,1478862464.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:44.492Z,1478862464.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:44.532Z,1478862464.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:44.894Z,1478862464.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:44.941Z,1478862464.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:45.296Z,1478862465.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:45.343Z,1478862465.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:45.697Z,1478862465.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:45.745Z,1478862465.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:46.088Z,1478862466.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:46.104Z,1478862466.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:46.481Z,1478862466.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:46.540Z,1478862466.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:46.884Z,1478862466.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:46.909Z,1478862466.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:47.308Z,1478862467.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:47.350Z,1478862467.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:47.689Z,1478862467.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:47.705Z,1478862467.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:48.081Z,1478862468.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:48.107Z,1478862468.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:48.490Z,1478862468.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:48.526Z,1478862468.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:48.893Z,1478862468.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:48.913Z,1478862468.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:49.293Z,1478862469.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:49.339Z,1478862469.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:49.710Z,1478862469.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:49.726Z,1478862469.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:50.090Z,1478862470.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:50.113Z,1478862470.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:50.481Z,1478862470.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:50.501Z,1478862470.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:50.899Z,1478862470.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:50.914Z,1478862470.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:51.288Z,1478862471.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:51.390Z,1478862471.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:51.699Z,1478862471.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:51.728Z,1478862471.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:52.083Z,1478862472.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:52.170Z,1478862472.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:52.482Z,1478862472.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:52.505Z,1478862472.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:52.884Z,1478862472.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:52.935Z,1478862472.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:53.283Z,1478862473.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:53.338Z,1478862473.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:53.698Z,1478862473.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:53.746Z,1478862473.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:54.104Z,1478862474.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:54.170Z,1478862474.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:54.483Z,1478862474.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:54.556Z,1478862474.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:54.891Z,1478862474.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:54.936Z,1478862474.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:55.290Z,1478862475.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:55.322Z,1478862475.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:55.683Z,1478862475.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:55.731Z,1478862475.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:56.083Z,1478862476.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:56.132Z,1478862476.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:56.491Z,1478862476.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:56.522Z,1478862476.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:56.900Z,1478862476.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:56.950Z,1478862476.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:57.291Z,1478862477.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:57.321Z,1478862477.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:57.683Z,1478862477.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:57.720Z,1478862477.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:58.083Z,1478862478.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:58.119Z,1478862478.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:58.483Z,1478862478.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:58.542Z,1478862478.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:58.889Z,1478862478.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:58.918Z,1478862478.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:59.290Z,1478862479.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:59.314Z,1478862479.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:07:59.684Z,1478862479.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:07:59.722Z,1478862479.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:00.083Z,1478862480.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:00.131Z,1478862480.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:00.483Z,1478862480.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:00.531Z,1478862480.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:00.891Z,1478862480.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:00.938Z,1478862480.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:01.283Z,1478862481.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:01.313Z,1478862481.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:01.683Z,1478862481.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:01.742Z,1478862481.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:02.091Z,1478862482.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:02.136Z,1478862482.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:02.496Z,1478862482.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:02.512Z,1478862482.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:02.908Z,1478862482.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:02.924Z,1478862482.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:03.282Z,1478862483.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:03.325Z,1478862483.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:03.682Z,1478862483.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:03.721Z,1478862483.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:04.081Z,1478862484.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:04.101Z,1478862484.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:04.486Z,1478862484.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:04.513Z,1478862484.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:04.889Z,1478862484.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:04.915Z,1478862484.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:05.281Z,1478862485.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:05.317Z,1478862485.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:05.690Z,1478862485.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:05.716Z,1478862485.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:06.081Z,1478862486.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:06.118Z,1478862486.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:06.481Z,1478862486.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:06.538Z,1478862486.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:06.889Z,1478862486.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:06.926Z,1478862486.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:07.281Z,1478862487.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:07.301Z,1478862487.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:07.685Z,1478862487.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:07.700Z,1478862487.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:08.089Z,1478862488.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:08.104Z,1478862488.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:08.489Z,1478862488.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:08.509Z,1478862488.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:08.889Z,1478862488.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:08.904Z,1478862488.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:09.291Z,1478862489.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:09.306Z,1478862489.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:09.693Z,1478862489.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:09.702Z,1478862489.702 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:08:09.702Z,1478862489.702 [BPC1] Communications Fault, FailCount= 1
2016-11-11T11:08:09.702Z,1478862489.702 [BPC1](ERROR): Communications Fault
2016-11-11T11:08:09.710Z,1478862489.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:09.751Z,1478862489.751 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:08:10.090Z,1478862490.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:10.106Z,1478862490.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:10.481Z,1478862490.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:10.514Z,1478862490.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:10.907Z,1478862490.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:10.922Z,1478862490.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:10.959Z,1478862490.958 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:08:10.959Z,1478862490.959 [BPC1] No Fault, FailCount= 1
2016-11-11T11:08:11.310Z,1478862491.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:11.398Z,1478862491.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:11.682Z,1478862491.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:11.731Z,1478862491.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:12.082Z,1478862492.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:12.120Z,1478862492.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:12.486Z,1478862492.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:12.525Z,1478862492.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:12.882Z,1478862492.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:12.914Z,1478862492.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:13.286Z,1478862493.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:13.303Z,1478862493.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:13.684Z,1478862493.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:13.717Z,1478862493.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:14.090Z,1478862494.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:14.106Z,1478862494.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:14.481Z,1478862494.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:14.515Z,1478862494.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:14.881Z,1478862494.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:14.914Z,1478862494.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:15.281Z,1478862495.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:15.315Z,1478862495.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:15.685Z,1478862495.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:15.708Z,1478862495.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:16.081Z,1478862496.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:16.118Z,1478862496.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:16.494Z,1478862496.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:16.521Z,1478862496.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:16.882Z,1478862496.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:16.925Z,1478862496.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:17.286Z,1478862497.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:17.301Z,1478862497.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:17.681Z,1478862497.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:17.716Z,1478862497.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:18.081Z,1478862498.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:18.114Z,1478862498.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:18.481Z,1478862498.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:18.506Z,1478862498.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:18.890Z,1478862498.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:18.925Z,1478862498.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:19.281Z,1478862499.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:19.317Z,1478862499.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:19.700Z,1478862499.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:19.724Z,1478862499.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:20.104Z,1478862500.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:20.125Z,1478862500.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:23.788Z,1478862503.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:23.873Z,1478862503.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:23.984Z,1478862503.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:24.016Z,1478862504.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:24.342Z,1478862504.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:24.424Z,1478862504.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:24.742Z,1478862504.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:24.782Z,1478862504.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:25.141Z,1478862505.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:25.180Z,1478862505.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:25.553Z,1478862505.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:25.605Z,1478862505.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:25.945Z,1478862505.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:25.995Z,1478862505.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:26.349Z,1478862506.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:26.367Z,1478862506.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:26.752Z,1478862506.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:26.771Z,1478862506.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:27.148Z,1478862507.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:27.166Z,1478862507.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:27.553Z,1478862507.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:27.570Z,1478862507.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:27.961Z,1478862507.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:27.976Z,1478862507.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:28.362Z,1478862508.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:28.390Z,1478862508.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:28.752Z,1478862508.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:28.780Z,1478862508.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:29.150Z,1478862509.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:29.182Z,1478862509.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:29.542Z,1478862509.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:29.583Z,1478862509.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:29.941Z,1478862509.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:29.959Z,1478862509.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:30.346Z,1478862510.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:30.364Z,1478862510.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:30.753Z,1478862510.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:30.771Z,1478862510.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:31.145Z,1478862511.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:31.163Z,1478862511.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:31.549Z,1478862511.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:31.567Z,1478862511.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:31.944Z,1478862511.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:31.979Z,1478862511.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:32.349Z,1478862512.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:32.370Z,1478862512.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:32.781Z,1478862512.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:32.813Z,1478862512.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:33.142Z,1478862513.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:33.212Z,1478862513.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:33.552Z,1478862513.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:33.581Z,1478862513.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:33.942Z,1478862513.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:33.974Z,1478862513.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:34.345Z,1478862514.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:34.385Z,1478862514.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:34.750Z,1478862514.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:34.780Z,1478862514.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:35.147Z,1478862515.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:35.179Z,1478862515.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:35.546Z,1478862515.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:35.587Z,1478862515.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:35.950Z,1478862515.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:35.997Z,1478862515.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:36.349Z,1478862516.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:36.401Z,1478862516.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:36.758Z,1478862516.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:36.774Z,1478862516.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:37.165Z,1478862517.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:37.198Z,1478862517.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:37.548Z,1478862517.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:37.595Z,1478862517.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:37.856Z,1478862517.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:37.942Z,1478862517.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:38.025Z,1478862518.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:38.341Z,1478862518.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:38.403Z,1478862518.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:38.652Z,1478862518.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:38.749Z,1478862518.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:38.784Z,1478862518.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:39.149Z,1478862519.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:39.194Z,1478862519.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:39.548Z,1478862519.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:39.605Z,1478862519.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:39.945Z,1478862519.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:39.981Z,1478862519.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:40.344Z,1478862520.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:40.400Z,1478862520.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:40.748Z,1478862520.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:40.810Z,1478862520.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:41.165Z,1478862521.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:41.180Z,1478862521.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:41.564Z,1478862521.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:41.585Z,1478862521.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:41.942Z,1478862521.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:41.970Z,1478862521.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:42.342Z,1478862522.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:42.384Z,1478862522.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:42.741Z,1478862522.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:42.791Z,1478862522.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:43.149Z,1478862523.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:43.185Z,1478862523.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:43.542Z,1478862523.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:43.584Z,1478862523.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:43.941Z,1478862523.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:43.979Z,1478862523.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:44.341Z,1478862524.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:44.359Z,1478862524.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:44.746Z,1478862524.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:44.777Z,1478862524.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:45.148Z,1478862525.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:45.166Z,1478862525.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:45.549Z,1478862525.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:45.566Z,1478862525.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:45.948Z,1478862525.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:45.965Z,1478862525.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:46.344Z,1478862526.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:46.378Z,1478862526.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:46.748Z,1478862526.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:46.766Z,1478862526.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:47.149Z,1478862527.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:47.167Z,1478862527.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:47.544Z,1478862527.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:47.581Z,1478862527.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:47.942Z,1478862527.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:47.977Z,1478862527.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:48.342Z,1478862528.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:48.369Z,1478862528.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:48.750Z,1478862528.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:48.782Z,1478862528.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:49.141Z,1478862529.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:49.221Z,1478862529.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:49.584Z,1478862529.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:49.607Z,1478862529.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:49.952Z,1478862529.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:49.993Z,1478862529.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:50.346Z,1478862530.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:50.373Z,1478862530.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:50.764Z,1478862530.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:50.779Z,1478862530.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:51.149Z,1478862531.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:51.181Z,1478862531.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:51.541Z,1478862531.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:51.580Z,1478862531.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:51.942Z,1478862531.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:51.978Z,1478862531.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:52.341Z,1478862532.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:52.379Z,1478862532.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:52.746Z,1478862532.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:52.821Z,1478862532.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:53.141Z,1478862533.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:53.194Z,1478862533.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:53.541Z,1478862533.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:53.590Z,1478862533.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:53.975Z,1478862533.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:53.991Z,1478862533.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:54.394Z,1478862534.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:54.438Z,1478862534.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:54.746Z,1478862534.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:54.769Z,1478862534.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:55.147Z,1478862535.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:55.165Z,1478862535.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:55.553Z,1478862535.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:55.577Z,1478862535.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:55.944Z,1478862535.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:55.959Z,1478862535.959 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:08:55.959Z,1478862535.959 [BPC1] Communications Fault, FailCount= 1
2016-11-11T11:08:55.963Z,1478862535.963 [BPC1](ERROR): Communications Fault
2016-11-11T11:08:55.976Z,1478862535.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:56.023Z,1478862536.023 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:08:56.341Z,1478862536.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:56.378Z,1478862536.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:56.741Z,1478862536.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:56.777Z,1478862536.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:57.142Z,1478862537.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:57.173Z,1478862537.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:57.214Z,1478862537.214 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:08:57.214Z,1478862537.214 [BPC1] No Fault, FailCount= 1
2016-11-11T11:08:57.541Z,1478862537.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:57.629Z,1478862537.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:57.941Z,1478862537.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:57.980Z,1478862537.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:58.346Z,1478862538.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:58.377Z,1478862538.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:58.741Z,1478862538.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:58.763Z,1478862538.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:59.149Z,1478862539.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:59.166Z,1478862539.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:59.544Z,1478862539.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:59.568Z,1478862539.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:08:59.948Z,1478862539.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:08:59.966Z,1478862539.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:00.353Z,1478862540.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:00.371Z,1478862540.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:00.759Z,1478862540.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:00.775Z,1478862540.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:01.165Z,1478862541.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:01.181Z,1478862541.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:01.566Z,1478862541.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:01.621Z,1478862541.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:01.941Z,1478862541.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:01.978Z,1478862541.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:02.341Z,1478862542.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:02.379Z,1478862542.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:02.760Z,1478862542.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:02.781Z,1478862542.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:03.146Z,1478862543.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:03.176Z,1478862543.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:03.541Z,1478862543.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:03.578Z,1478862543.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:03.943Z,1478862543.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:03.977Z,1478862543.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:04.346Z,1478862544.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:04.381Z,1478862544.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:04.742Z,1478862544.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:04.773Z,1478862544.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:05.142Z,1478862545.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:05.184Z,1478862545.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:05.580Z,1478862545.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:05.620Z,1478862545.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:05.952Z,1478862545.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:05.997Z,1478862545.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:06.345Z,1478862546.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:06.363Z,1478862546.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:06.744Z,1478862546.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:06.764Z,1478862546.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:07.153Z,1478862547.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:07.173Z,1478862547.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:07.549Z,1478862547.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:07.572Z,1478862547.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:07.952Z,1478862547.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:07.969Z,1478862547.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:08.344Z,1478862548.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:08.374Z,1478862548.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:08.750Z,1478862548.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:08.781Z,1478862548.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:09.141Z,1478862549.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:09.178Z,1478862549.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:09.541Z,1478862549.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:09.609Z,1478862549.609 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:09.609Z,1478862549.609 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 107
2016-11-11T11:09:09.609Z,1478862549.609 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:09:09.624Z,1478862549.624 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:09.624Z,1478862549.624 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 107
2016-11-11T11:09:09.624Z,1478862549.625 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:09:09.627Z,1478862549.626 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:09.627Z,1478862549.627 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 107
2016-11-11T11:09:09.627Z,1478862549.627 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:09:09.668Z,1478862549.668 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:09:09.668Z,1478862549.668 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:09:09.668Z,1478862549.668 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:09:09.950Z,1478862549.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:09.993Z,1478862549.993 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:09:09.993Z,1478862549.993 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 107
2016-11-11T11:09:09.994Z,1478862549.994 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:09:09.994Z,1478862549.994 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 107
2016-11-11T11:09:09.994Z,1478862549.994 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:09:09.994Z,1478862549.994 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 107
2016-11-11T11:09:10.350Z,1478862550.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:10.392Z,1478862550.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:09:10.393Z,1478862550.392 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:09:10.393Z,1478862550.393 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:09:10.402Z,1478862550.402 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:09:10.402Z,1478862550.402 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:09:10.403Z,1478862550.403 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:09:10.415Z,1478862550.415 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:09:10.416Z,1478862550.416 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:09:10.416Z,1478862550.416 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:09:10.740Z,1478862550.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:10.777Z,1478862550.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:11.142Z,1478862551.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:11.213Z,1478862551.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:11.544Z,1478862551.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:11.593Z,1478862551.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:11.948Z,1478862551.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:11.966Z,1478862551.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:12.351Z,1478862552.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:12.372Z,1478862552.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:12.760Z,1478862552.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:12.821Z,1478862552.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:13.145Z,1478862553.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:13.177Z,1478862553.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:13.549Z,1478862553.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:13.597Z,1478862553.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:13.962Z,1478862553.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:13.984Z,1478862553.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:14.352Z,1478862554.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:14.394Z,1478862554.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:14.742Z,1478862554.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:14.796Z,1478862554.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:15.142Z,1478862555.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:15.160Z,1478862555.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:15.545Z,1478862555.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:15.564Z,1478862555.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:15.946Z,1478862555.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:15.999Z,1478862555.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:16.345Z,1478862556.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:16.364Z,1478862556.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:16.754Z,1478862556.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:16.777Z,1478862556.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:17.149Z,1478862557.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:17.173Z,1478862557.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:17.541Z,1478862557.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:17.567Z,1478862557.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:17.948Z,1478862557.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:17.966Z,1478862557.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:18.349Z,1478862558.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:18.367Z,1478862558.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:18.759Z,1478862558.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:18.775Z,1478862558.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:19.152Z,1478862559.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:19.170Z,1478862559.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:19.541Z,1478862559.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:19.577Z,1478862559.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:19.941Z,1478862559.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:19.978Z,1478862559.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:20.341Z,1478862560.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:20.372Z,1478862560.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:24.011Z,1478862564.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:24.030Z,1478862564.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:24.138Z,1478862564.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:24.174Z,1478862564.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:24.533Z,1478862564.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:24.568Z,1478862564.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:24.928Z,1478862564.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:24.949Z,1478862564.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:25.325Z,1478862565.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:25.385Z,1478862565.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:25.726Z,1478862565.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:25.741Z,1478862565.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:26.130Z,1478862566.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:26.146Z,1478862566.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:26.528Z,1478862566.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:26.601Z,1478862566.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:26.917Z,1478862566.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:26.944Z,1478862566.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:27.322Z,1478862567.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:27.349Z,1478862567.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:27.713Z,1478862567.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:27.758Z,1478862567.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:28.113Z,1478862568.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:28.149Z,1478862568.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:28.524Z,1478862568.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:28.588Z,1478862568.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:28.914Z,1478862568.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:28.961Z,1478862568.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:29.313Z,1478862569.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:29.349Z,1478862569.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:29.715Z,1478862569.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:29.743Z,1478862569.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:30.113Z,1478862570.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:30.153Z,1478862570.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:30.525Z,1478862570.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:30.570Z,1478862570.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:30.919Z,1478862570.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:30.934Z,1478862570.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:31.317Z,1478862571.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:31.344Z,1478862571.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:31.721Z,1478862571.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:31.736Z,1478862571.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:32.114Z,1478862572.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:32.149Z,1478862572.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:32.515Z,1478862572.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:32.594Z,1478862572.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:32.922Z,1478862572.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:32.938Z,1478862572.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:33.321Z,1478862573.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:33.336Z,1478862573.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:33.716Z,1478862573.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:33.749Z,1478862573.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:34.120Z,1478862574.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:34.141Z,1478862574.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:34.521Z,1478862574.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:34.537Z,1478862574.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:34.959Z,1478862574.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:34.000Z,1478862575.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:35.317Z,1478862575.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:35.350Z,1478862575.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:35.713Z,1478862575.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:35.729Z,1478862575.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:36.113Z,1478862576.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:36.133Z,1478862576.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:36.517Z,1478862576.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:36.541Z,1478862576.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:36.942Z,1478862576.942 [NAL9602](INFO): SBD MO Status=2, MOMSN=344, MT Status=2, MTMSN=0
2016-11-11T11:09:36.942Z,1478862576.942 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T11:09:36.982Z,1478862576.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:37.019Z,1478862577.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:37.334Z,1478862577.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:37.349Z,1478862577.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:37.713Z,1478862577.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:37.745Z,1478862577.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:38.113Z,1478862578.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:38.140Z,1478862578.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:38.515Z,1478862578.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:38.566Z,1478862578.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:38.913Z,1478862578.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:38.946Z,1478862578.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:39.313Z,1478862579.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:39.350Z,1478862579.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:39.713Z,1478862579.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:39.746Z,1478862579.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:40.113Z,1478862580.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:40.173Z,1478862580.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:40.526Z,1478862580.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:40.566Z,1478862580.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:40.913Z,1478862580.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:40.953Z,1478862580.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:41.327Z,1478862581.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:41.388Z,1478862581.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:41.732Z,1478862581.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:41.761Z,1478862581.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:42.118Z,1478862582.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:42.134Z,1478862582.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:42.536Z,1478862582.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:42.589Z,1478862582.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:42.928Z,1478862582.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:42.967Z,1478862582.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:43.323Z,1478862583.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:43.373Z,1478862583.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:43.724Z,1478862583.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:43.770Z,1478862583.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:44.121Z,1478862584.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:44.136Z,1478862584.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:44.525Z,1478862584.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:44.545Z,1478862584.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:44.920Z,1478862584.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:44.936Z,1478862584.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:45.324Z,1478862585.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:45.339Z,1478862585.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:45.716Z,1478862585.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:45.744Z,1478862585.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:46.121Z,1478862586.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:46.141Z,1478862586.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:46.533Z,1478862586.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:46.601Z,1478862586.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:46.913Z,1478862586.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:46.948Z,1478862586.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:47.313Z,1478862587.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:47.347Z,1478862587.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:47.713Z,1478862587.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:47.757Z,1478862587.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:48.117Z,1478862588.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:48.143Z,1478862588.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:48.543Z,1478862588.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:48.558Z,1478862588.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:48.950Z,1478862588.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:48.973Z,1478862588.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:49.313Z,1478862589.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:49.330Z,1478862589.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:49.713Z,1478862589.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:49.733Z,1478862589.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:50.117Z,1478862590.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:50.137Z,1478862590.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:50.521Z,1478862590.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:50.541Z,1478862590.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:50.945Z,1478862590.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:50.994Z,1478862590.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:51.321Z,1478862591.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:51.345Z,1478862591.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:51.713Z,1478862591.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:51.745Z,1478862591.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:52.113Z,1478862592.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:52.153Z,1478862592.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:52.513Z,1478862592.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:52.548Z,1478862592.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:52.941Z,1478862592.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:52.956Z,1478862592.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:53.332Z,1478862593.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:53.365Z,1478862593.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:53.713Z,1478862593.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:53.733Z,1478862593.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:54.113Z,1478862594.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:54.133Z,1478862594.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:54.518Z,1478862594.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:54.590Z,1478862594.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:54.920Z,1478862594.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:54.941Z,1478862594.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:55.321Z,1478862595.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:55.341Z,1478862595.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:55.716Z,1478862595.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:55.769Z,1478862595.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:56.121Z,1478862596.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:56.136Z,1478862596.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:56.521Z,1478862596.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:56.541Z,1478862596.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:56.916Z,1478862596.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:56.971Z,1478862596.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:57.335Z,1478862597.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:57.350Z,1478862597.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:57.734Z,1478862597.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:57.789Z,1478862597.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:58.129Z,1478862598.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:58.183Z,1478862598.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:58.530Z,1478862598.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:58.546Z,1478862598.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:58.918Z,1478862598.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:58.953Z,1478862598.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:59.313Z,1478862599.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:59.345Z,1478862599.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:09:59.713Z,1478862599.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:09:59.748Z,1478862599.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:00.113Z,1478862600.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:00.140Z,1478862600.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:00.578Z,1478862600.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:00.606Z,1478862600.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:00.913Z,1478862600.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:00.945Z,1478862600.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:01.336Z,1478862601.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:01.366Z,1478862601.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:01.724Z,1478862601.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:01.759Z,1478862601.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:02.113Z,1478862602.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:02.157Z,1478862602.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:02.513Z,1478862602.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:02.549Z,1478862602.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:02.948Z,1478862602.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:02.988Z,1478862602.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:03.320Z,1478862603.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:03.336Z,1478862603.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:03.721Z,1478862603.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:03.741Z,1478862603.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:04.119Z,1478862604.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:04.136Z,1478862604.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:04.520Z,1478862604.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:04.536Z,1478862604.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:04.933Z,1478862604.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:04.982Z,1478862604.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:05.325Z,1478862605.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:05.345Z,1478862605.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:05.713Z,1478862605.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:05.740Z,1478862605.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:06.121Z,1478862606.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:06.153Z,1478862606.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:06.529Z,1478862606.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:06.549Z,1478862606.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:06.918Z,1478862606.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:06.946Z,1478862606.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:07.313Z,1478862607.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:07.349Z,1478862607.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:07.717Z,1478862607.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:07.749Z,1478862607.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:08.113Z,1478862608.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:08.157Z,1478862608.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:08.522Z,1478862608.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:08.553Z,1478862608.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:08.917Z,1478862608.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:08.973Z,1478862608.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:09.313Z,1478862609.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:09.322Z,1478862609.322 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T11:10:09.322Z,1478862609.322 [BPC1] Data Fault, FailCount= 1
2016-11-11T11:10:09.322Z,1478862609.322 [BPC1](ERROR): Data Fault
2016-11-11T11:10:09.362Z,1478862609.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:09.406Z,1478862609.406 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T11:10:09.717Z,1478862609.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:09.734Z,1478862609.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:10.132Z,1478862610.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:10.164Z,1478862610.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:10.536Z,1478862610.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:10.564Z,1478862610.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:10.584Z,1478862610.584 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:10:10.584Z,1478862610.584 [BPC1] No Fault, FailCount= 1
2016-11-11T11:10:10.918Z,1478862610.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:11.021Z,1478862611.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:11.321Z,1478862611.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:11.341Z,1478862611.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:11.721Z,1478862611.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:11.766Z,1478862611.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:12.120Z,1478862612.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:12.141Z,1478862612.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:12.525Z,1478862612.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:12.541Z,1478862612.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:12.916Z,1478862612.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:12.953Z,1478862612.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:13.316Z,1478862613.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:13.344Z,1478862613.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:13.725Z,1478862613.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:13.745Z,1478862613.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:14.113Z,1478862614.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:14.149Z,1478862614.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:14.558Z,1478862614.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:14.595Z,1478862614.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:14.931Z,1478862614.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:14.948Z,1478862614.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:15.313Z,1478862615.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:15.341Z,1478862615.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:15.713Z,1478862615.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:15.739Z,1478862615.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:16.129Z,1478862616.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:16.149Z,1478862616.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:16.513Z,1478862616.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:16.548Z,1478862616.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:16.915Z,1478862616.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:16.952Z,1478862616.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:17.313Z,1478862617.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:17.333Z,1478862617.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:17.714Z,1478862617.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:17.733Z,1478862617.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:18.123Z,1478862618.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:18.139Z,1478862618.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:18.532Z,1478862618.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:18.564Z,1478862618.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:18.940Z,1478862618.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:18.972Z,1478862618.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:19.313Z,1478862619.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:19.350Z,1478862619.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:19.713Z,1478862619.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:19.741Z,1478862619.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:20.118Z,1478862620.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:20.150Z,1478862620.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:20.513Z,1478862620.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:20.546Z,1478862620.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:23.883Z,1478862623.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:23.967Z,1478862623.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:24.084Z,1478862624.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:24.104Z,1478862624.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:24.476Z,1478862624.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:24.492Z,1478862624.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:24.872Z,1478862624.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:24.922Z,1478862624.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:25.249Z,1478862625.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:25.265Z,1478862625.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:25.649Z,1478862625.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:25.701Z,1478862625.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:26.049Z,1478862626.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:26.098Z,1478862626.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:26.461Z,1478862626.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:26.485Z,1478862626.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:26.853Z,1478862626.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:26.877Z,1478862626.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:27.257Z,1478862627.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:27.273Z,1478862627.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:27.657Z,1478862627.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:27.677Z,1478862627.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:28.057Z,1478862628.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:28.077Z,1478862628.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:28.460Z,1478862628.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:28.526Z,1478862628.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:28.871Z,1478862628.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:28.886Z,1478862628.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:29.270Z,1478862629.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:29.286Z,1478862629.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:29.672Z,1478862629.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:29.693Z,1478862629.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:30.064Z,1478862630.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:30.089Z,1478862630.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:30.449Z,1478862630.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:30.477Z,1478862630.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:30.863Z,1478862630.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:30.907Z,1478862630.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:31.249Z,1478862631.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:31.285Z,1478862631.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:31.653Z,1478862631.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:31.689Z,1478862631.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:32.050Z,1478862632.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:32.093Z,1478862632.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:32.449Z,1478862632.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:32.489Z,1478862632.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:32.863Z,1478862632.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:32.929Z,1478862632.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:33.254Z,1478862633.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:33.285Z,1478862633.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:33.654Z,1478862633.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:33.681Z,1478862633.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:34.052Z,1478862634.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:34.081Z,1478862634.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:34.458Z,1478862634.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:34.473Z,1478862634.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:34.865Z,1478862634.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:34.885Z,1478862634.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:35.261Z,1478862635.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:35.282Z,1478862635.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:35.654Z,1478862635.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:35.677Z,1478862635.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:36.049Z,1478862636.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:36.077Z,1478862636.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:36.458Z,1478862636.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:36.482Z,1478862636.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:36.854Z,1478862636.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:36.913Z,1478862636.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:37.253Z,1478862637.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:37.289Z,1478862637.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:37.657Z,1478862637.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:37.677Z,1478862637.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:38.057Z,1478862638.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:38.125Z,1478862638.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:38.464Z,1478862638.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:38.480Z,1478862638.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:38.892Z,1478862638.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:38.941Z,1478862638.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:39.252Z,1478862639.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:39.290Z,1478862639.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:39.653Z,1478862639.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:39.681Z,1478862639.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:40.049Z,1478862640.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:40.115Z,1478862640.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:40.449Z,1478862640.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:40.517Z,1478862640.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:40.849Z,1478862640.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:40.881Z,1478862640.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:41.257Z,1478862641.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:41.280Z,1478862641.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:41.649Z,1478862641.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:41.685Z,1478862641.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:42.049Z,1478862642.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:42.081Z,1478862642.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:42.502Z,1478862642.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:42.542Z,1478862642.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:42.849Z,1478862642.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:42.886Z,1478862642.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:43.251Z,1478862643.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:43.290Z,1478862643.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:43.650Z,1478862643.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:43.669Z,1478862643.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:44.053Z,1478862644.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:44.073Z,1478862644.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:44.454Z,1478862644.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:44.470Z,1478862644.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:44.860Z,1478862644.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:44.896Z,1478862644.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:45.258Z,1478862645.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:45.273Z,1478862645.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:45.652Z,1478862645.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:45.689Z,1478862645.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:46.049Z,1478862646.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:46.081Z,1478862646.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:46.449Z,1478862646.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:46.487Z,1478862646.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:46.873Z,1478862646.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:46.920Z,1478862646.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:47.264Z,1478862647.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:47.291Z,1478862647.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:47.650Z,1478862647.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:47.693Z,1478862647.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:48.057Z,1478862648.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:48.080Z,1478862648.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:48.449Z,1478862648.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:48.469Z,1478862648.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:48.860Z,1478862648.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:48.901Z,1478862648.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:49.256Z,1478862649.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:49.272Z,1478862649.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:49.655Z,1478862649.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:49.677Z,1478862649.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:50.057Z,1478862650.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:50.073Z,1478862650.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:50.464Z,1478862650.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:50.485Z,1478862650.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:50.853Z,1478862650.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:50.921Z,1478862650.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:51.253Z,1478862651.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:51.280Z,1478862651.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:51.649Z,1478862651.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:51.682Z,1478862651.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:52.049Z,1478862652.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:52.083Z,1478862652.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:52.449Z,1478862652.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:52.481Z,1478862652.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:52.850Z,1478862652.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:52.921Z,1478862652.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:53.249Z,1478862653.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:53.293Z,1478862653.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:53.650Z,1478862653.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:53.693Z,1478862653.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:54.049Z,1478862654.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:54.101Z,1478862654.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:54.452Z,1478862654.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:54.477Z,1478862654.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:54.849Z,1478862654.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:54.902Z,1478862654.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:55.249Z,1478862655.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:55.298Z,1478862655.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:55.663Z,1478862655.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:55.697Z,1478862655.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:56.068Z,1478862656.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:56.094Z,1478862656.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:56.461Z,1478862656.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:56.511Z,1478862656.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:56.856Z,1478862656.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:56.876Z,1478862656.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:57.257Z,1478862657.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:57.277Z,1478862657.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:57.649Z,1478862657.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:57.682Z,1478862657.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:58.064Z,1478862658.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:58.085Z,1478862658.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:58.449Z,1478862658.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:58.486Z,1478862658.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:58.854Z,1478862658.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:58.886Z,1478862658.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:59.253Z,1478862659.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:59.289Z,1478862659.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:10:59.653Z,1478862659.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:10:59.703Z,1478862659.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:00.064Z,1478862660.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:00.099Z,1478862660.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:00.468Z,1478862660.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:00.501Z,1478862660.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:00.856Z,1478862660.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:00.888Z,1478862660.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:01.253Z,1478862661.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:01.275Z,1478862661.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:01.656Z,1478862661.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:01.677Z,1478862661.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:02.059Z,1478862662.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:02.081Z,1478862662.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:02.449Z,1478862662.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:02.475Z,1478862662.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:02.849Z,1478862662.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:02.885Z,1478862662.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:03.266Z,1478862663.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:03.285Z,1478862663.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:03.649Z,1478862663.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:03.677Z,1478862663.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:04.049Z,1478862664.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:04.064Z,1478862664.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:04.464Z,1478862664.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:04.492Z,1478862664.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:04.860Z,1478862664.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:04.892Z,1478862664.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:05.263Z,1478862665.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:05.302Z,1478862665.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:05.660Z,1478862665.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:05.685Z,1478862665.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:06.052Z,1478862666.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:06.105Z,1478862666.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:06.465Z,1478862666.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:06.485Z,1478862666.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:06.860Z,1478862666.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:06.885Z,1478862666.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:07.249Z,1478862667.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:07.317Z,1478862667.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:07.649Z,1478862667.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:07.685Z,1478862667.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:08.050Z,1478862668.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:08.097Z,1478862668.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:08.458Z,1478862668.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:08.483Z,1478862668.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:08.849Z,1478862668.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:08.897Z,1478862668.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:09.268Z,1478862669.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:09.315Z,1478862669.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:09.660Z,1478862669.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:09.695Z,1478862669.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:10.072Z,1478862670.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:10.093Z,1478862670.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:10.480Z,1478862670.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:10.510Z,1478862670.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:10.850Z,1478862670.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:10.866Z,1478862670.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:11.250Z,1478862671.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:11.286Z,1478862671.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:11.640Z,1478862671.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:11.659Z,1478862671.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:11.691Z,1478862671.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:12.057Z,1478862672.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:12.073Z,1478862672.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:12.438Z,1478862672.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:12.450Z,1478862672.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:12.485Z,1478862672.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:12.849Z,1478862672.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:12.881Z,1478862672.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:13.249Z,1478862673.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:13.285Z,1478862673.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:13.649Z,1478862673.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:13.685Z,1478862673.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:14.088Z,1478862674.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:14.103Z,1478862674.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:14.460Z,1478862674.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:14.493Z,1478862674.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:14.867Z,1478862674.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:14.882Z,1478862674.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:15.260Z,1478862675.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:15.297Z,1478862675.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:15.650Z,1478862675.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:15.693Z,1478862675.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:16.053Z,1478862676.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:16.093Z,1478862676.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:16.454Z,1478862676.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:16.485Z,1478862676.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:16.852Z,1478862676.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:16.885Z,1478862676.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:17.254Z,1478862677.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:17.285Z,1478862677.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:17.658Z,1478862677.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:17.680Z,1478862677.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:18.057Z,1478862678.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:18.079Z,1478862678.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:18.466Z,1478862678.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:18.481Z,1478862678.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:18.867Z,1478862678.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:18.883Z,1478862678.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:19.272Z,1478862679.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:19.288Z,1478862679.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:19.297Z,1478862679.297 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T11:06:19.3Z
2016-11-11T11:11:19.297Z,1478862679.297 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T11:11:19.297Z,1478862679.297 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T11:11:19.669Z,1478862679.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:19.684Z,1478862679.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:20.721Z,1478862680.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:20.769Z,1478862680.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:20.885Z,1478862680.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:20.913Z,1478862680.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:24.210Z,1478862684.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:24.226Z,1478862684.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:24.298Z,1478862684.297 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0148.lzma
2016-11-11T11:11:24.400Z,1478862684.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:24.440Z,1478862684.440 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:11:24.440Z,1478862684.440 [BPC1] Communications Fault, FailCount= 1
2016-11-11T11:11:24.440Z,1478862684.441 [BPC1](ERROR): Communications Fault
2016-11-11T11:11:24.457Z,1478862684.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:24.510Z,1478862684.510 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:11:24.709Z,1478862684.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:24.742Z,1478862684.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:25.089Z,1478862685.089 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0148.lzma.bak
2016-11-11T11:11:25.089Z,1478862685.089 [DataOverHttps](INFO): SBD MOMSN=4555349
2016-11-11T11:11:25.113Z,1478862685.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:25.160Z,1478862685.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:26.419Z,1478862686.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:26.448Z,1478862686.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:26.468Z,1478862686.468 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:11:26.468Z,1478862686.468 [BPC1] No Fault, FailCount= 1
2016-11-11T11:11:26.561Z,1478862686.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:26.649Z,1478862686.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:29.947Z,1478862689.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:29.998Z,1478862689.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:30.101Z,1478862690.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:30.141Z,1478862690.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:30.489Z,1478862690.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:30.529Z,1478862690.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:30.882Z,1478862690.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:30.909Z,1478862690.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:31.275Z,1478862691.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:31.320Z,1478862691.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:31.682Z,1478862691.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:31.721Z,1478862691.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:35.128Z,1478862695.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:35.201Z,1478862695.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:35.246Z,1478862695.246 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0149.lzma
2016-11-11T11:11:35.318Z,1478862695.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:35.363Z,1478862695.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:35.673Z,1478862695.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:35.693Z,1478862695.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:36.045Z,1478862696.045 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0149.lzma.bak
2016-11-11T11:11:36.045Z,1478862696.045 [DataOverHttps](INFO): SBD MOMSN=4555351
2016-11-11T11:11:36.084Z,1478862696.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:36.112Z,1478862696.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:37.424Z,1478862697.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:37.444Z,1478862697.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:37.461Z,1478862697.461 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T11:11:37.461Z,1478862697.461 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T11:11:37.461Z,1478862697.461 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T11:11:37.550Z,1478862697.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:37.574Z,1478862697.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:41.039Z,1478862701.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:41.055Z,1478862701.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:41.180Z,1478862701.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:41.213Z,1478862701.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:41.537Z,1478862701.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:41.593Z,1478862701.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:41.933Z,1478862701.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:41.969Z,1478862701.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:42.333Z,1478862702.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:42.393Z,1478862702.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:42.745Z,1478862702.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:42.817Z,1478862702.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:43.148Z,1478862703.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:43.211Z,1478862703.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:43.540Z,1478862703.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:43.589Z,1478862703.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:43.934Z,1478862703.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:43.951Z,1478862703.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:44.338Z,1478862704.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:44.354Z,1478862704.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:44.734Z,1478862704.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:44.754Z,1478862704.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:45.139Z,1478862705.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:45.162Z,1478862705.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:45.540Z,1478862705.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:45.568Z,1478862705.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:45.933Z,1478862705.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:45.969Z,1478862705.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:46.345Z,1478862706.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:46.363Z,1478862706.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:46.731Z,1478862706.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:46.764Z,1478862706.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:47.148Z,1478862707.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:47.172Z,1478862707.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:47.549Z,1478862707.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:47.571Z,1478862707.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:47.948Z,1478862707.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:48.016Z,1478862708.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:48.340Z,1478862708.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:48.389Z,1478862708.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:48.730Z,1478862708.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:48.746Z,1478862708.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:49.130Z,1478862709.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:49.146Z,1478862709.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:49.460Z,1478862709.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:49.534Z,1478862709.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:49.577Z,1478862709.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:49.933Z,1478862709.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:49.953Z,1478862709.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:50.257Z,1478862710.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:50.341Z,1478862710.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:50.369Z,1478862710.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:50.672Z,1478862710.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:50.733Z,1478862710.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:50.772Z,1478862710.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:51.132Z,1478862711.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:51.179Z,1478862711.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:51.537Z,1478862711.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:51.553Z,1478862711.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:51.936Z,1478862711.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:51.973Z,1478862711.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:52.392Z,1478862712.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:52.429Z,1478862712.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:52.772Z,1478862712.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:52.808Z,1478862712.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:53.129Z,1478862713.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:53.208Z,1478862713.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:53.533Z,1478862713.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:53.610Z,1478862713.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:53.933Z,1478862713.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:53.953Z,1478862713.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:54.329Z,1478862714.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:54.350Z,1478862714.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:54.714Z,1478862714.714 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T11:11:54.739Z,1478862714.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:54.765Z,1478862714.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:55.130Z,1478862715.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:55.145Z,1478862715.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:55.530Z,1478862715.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:55.549Z,1478862715.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:55.933Z,1478862715.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:55.998Z,1478862715.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:56.335Z,1478862716.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:56.350Z,1478862716.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:56.759Z,1478862716.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:56.806Z,1478862716.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:57.133Z,1478862717.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:57.212Z,1478862717.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:57.533Z,1478862717.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:57.578Z,1478862717.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:57.933Z,1478862717.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:57.981Z,1478862717.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:58.329Z,1478862718.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:58.349Z,1478862718.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:58.734Z,1478862718.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:58.749Z,1478862718.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:59.130Z,1478862719.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:59.148Z,1478862719.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:59.534Z,1478862719.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:59.549Z,1478862719.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:11:59.933Z,1478862719.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:11:59.967Z,1478862719.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:00.316Z,1478862720.316 [NAL9602](INFO): Powering down
2016-11-11T11:12:00.337Z,1478862720.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:00.352Z,1478862720.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:00.733Z,1478862720.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:00.748Z,1478862720.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:01.129Z,1478862721.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:01.149Z,1478862721.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:01.529Z,1478862721.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:01.545Z,1478862721.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:01.930Z,1478862721.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:01.945Z,1478862721.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:02.333Z,1478862722.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:02.348Z,1478862722.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:02.730Z,1478862722.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:02.745Z,1478862722.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:03.133Z,1478862723.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:03.148Z,1478862723.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:03.529Z,1478862723.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:03.549Z,1478862723.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:03.933Z,1478862723.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:03.949Z,1478862723.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:04.329Z,1478862724.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:04.345Z,1478862724.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:04.733Z,1478862724.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:04.748Z,1478862724.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:05.129Z,1478862725.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:05.181Z,1478862725.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:05.533Z,1478862725.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:05.553Z,1478862725.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:05.933Z,1478862725.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:05.953Z,1478862725.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:06.334Z,1478862726.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:06.353Z,1478862726.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:06.733Z,1478862726.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:06.753Z,1478862726.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:07.129Z,1478862727.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:07.145Z,1478862727.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:07.533Z,1478862727.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:07.549Z,1478862727.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:07.929Z,1478862727.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:07.949Z,1478862727.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:08.333Z,1478862728.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:08.349Z,1478862728.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:08.730Z,1478862728.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:08.774Z,1478862728.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:09.133Z,1478862729.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:09.149Z,1478862729.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:09.533Z,1478862729.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:09.548Z,1478862729.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:09.929Z,1478862729.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:09.950Z,1478862729.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:10.329Z,1478862730.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:10.382Z,1478862730.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:10.729Z,1478862730.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:10.749Z,1478862730.749 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:10.749Z,1478862730.749 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 108
2016-11-11T11:12:10.749Z,1478862730.749 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:12:10.758Z,1478862730.758 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:10.758Z,1478862730.758 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 108
2016-11-11T11:12:10.758Z,1478862730.758 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:12:10.760Z,1478862730.760 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:10.760Z,1478862730.760 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 108
2016-11-11T11:12:10.760Z,1478862730.760 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:12:10.774Z,1478862730.774 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:12:10.775Z,1478862730.774 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:12:10.775Z,1478862730.775 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:12:11.133Z,1478862731.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:11.198Z,1478862731.198 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:12:11.198Z,1478862731.198 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 108
2016-11-11T11:12:11.199Z,1478862731.198 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:12:11.199Z,1478862731.199 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 108
2016-11-11T11:12:11.199Z,1478862731.199 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:12:11.199Z,1478862731.200 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 108
2016-11-11T11:12:11.533Z,1478862731.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:11.548Z,1478862731.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:12:11.549Z,1478862731.549 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:12:11.549Z,1478862731.549 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:12:11.554Z,1478862731.554 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:12:11.554Z,1478862731.554 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:12:11.554Z,1478862731.554 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:12:11.557Z,1478862731.557 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:12:11.558Z,1478862731.558 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:12:11.558Z,1478862731.558 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:12:11.933Z,1478862731.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:11.978Z,1478862731.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:12.349Z,1478862732.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:12.397Z,1478862732.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:12.733Z,1478862732.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:12.748Z,1478862732.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:13.133Z,1478862733.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:13.233Z,1478862733.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:13.537Z,1478862733.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:13.560Z,1478862733.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:13.933Z,1478862733.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:13.948Z,1478862733.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:14.329Z,1478862734.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:14.359Z,1478862734.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:14.742Z,1478862734.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:14.773Z,1478862734.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:14.840Z,1478862734.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:15.129Z,1478862735.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:15.159Z,1478862735.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:15.248Z,1478862735.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:15.529Z,1478862735.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:15.559Z,1478862735.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:15.656Z,1478862735.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:15.942Z,1478862735.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:15.962Z,1478862735.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:16.064Z,1478862736.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:16.329Z,1478862736.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:16.353Z,1478862736.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:16.472Z,1478862736.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:16.729Z,1478862736.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:16.759Z,1478862736.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:16.880Z,1478862736.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:17.130Z,1478862737.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:17.163Z,1478862737.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:17.288Z,1478862737.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:17.529Z,1478862737.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:17.549Z,1478862737.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:17.929Z,1478862737.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:17.952Z,1478862737.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:18.084Z,1478862738.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:18.329Z,1478862738.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:18.364Z,1478862738.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:18.604Z,1478862738.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:18.729Z,1478862738.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:18.749Z,1478862738.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:19.129Z,1478862739.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:19.152Z,1478862739.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:19.400Z,1478862739.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:19.533Z,1478862739.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:19.553Z,1478862739.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:19.933Z,1478862739.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:19.953Z,1478862739.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:20.196Z,1478862740.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:20.339Z,1478862740.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:20.365Z,1478862740.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:20.729Z,1478862740.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:20.732Z,1478862740.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:20.808Z,1478862740.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:21.133Z,1478862741.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:21.177Z,1478862741.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:21.530Z,1478862741.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:21.553Z,1478862741.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:21.944Z,1478862741.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:21.965Z,1478862741.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:22.337Z,1478862742.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:22.364Z,1478862742.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:22.731Z,1478862742.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:22.766Z,1478862742.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:23.133Z,1478862743.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:23.169Z,1478862743.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:23.529Z,1478862743.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:23.559Z,1478862743.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:23.929Z,1478862743.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:23.975Z,1478862743.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:24.333Z,1478862744.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:24.417Z,1478862744.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:24.737Z,1478862744.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:24.752Z,1478862744.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:25.137Z,1478862745.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:25.174Z,1478862745.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:25.529Z,1478862745.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:25.582Z,1478862745.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:25.929Z,1478862745.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:25.981Z,1478862745.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:26.334Z,1478862746.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:26.394Z,1478862746.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:26.737Z,1478862746.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:26.789Z,1478862746.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:27.133Z,1478862747.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:27.153Z,1478862747.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:27.538Z,1478862747.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:27.554Z,1478862747.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:27.932Z,1478862747.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:27.968Z,1478862747.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:28.344Z,1478862748.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:28.364Z,1478862748.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:28.738Z,1478862748.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:28.763Z,1478862748.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:29.130Z,1478862749.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:29.158Z,1478862749.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:29.388Z,1478862749.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:29.529Z,1478862749.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:29.559Z,1478862749.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:29.929Z,1478862749.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:29.978Z,1478862749.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:30.193Z,1478862750.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:30.337Z,1478862750.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:30.373Z,1478862750.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:30.616Z,1478862750.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:30.733Z,1478862750.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:30.779Z,1478862750.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:31.132Z,1478862751.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:31.177Z,1478862751.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:31.412Z,1478862751.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:31.532Z,1478862751.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:31.548Z,1478862751.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:31.929Z,1478862751.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:31.949Z,1478862751.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:32.208Z,1478862752.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:32.341Z,1478862752.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:32.358Z,1478862752.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:32.620Z,1478862752.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:32.735Z,1478862752.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:32.750Z,1478862752.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:33.135Z,1478862753.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:33.159Z,1478862753.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:33.416Z,1478862753.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:33.536Z,1478862753.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:33.559Z,1478862753.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:33.940Z,1478862753.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:33.958Z,1478862753.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:34.212Z,1478862754.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:34.345Z,1478862754.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:34.368Z,1478862754.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:34.700Z,1478862754.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:34.740Z,1478862754.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:34.782Z,1478862754.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:35.135Z,1478862755.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:35.184Z,1478862755.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:35.496Z,1478862755.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:35.543Z,1478862755.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:35.593Z,1478862755.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:35.951Z,1478862755.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:35.989Z,1478862755.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:36.292Z,1478862756.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:36.341Z,1478862756.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:36.399Z,1478862756.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:36.731Z,1478862756.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:36.774Z,1478862756.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:37.044Z,1478862757.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:37.131Z,1478862757.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:37.199Z,1478862757.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:37.543Z,1478862757.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:37.629Z,1478862757.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:37.840Z,1478862757.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:37.943Z,1478862757.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:37.995Z,1478862757.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:44.605Z,1478862764.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:44.614Z,1478862764.614 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:12:44.614Z,1478862764.614 [BPC1] Communications Fault, FailCount= 1
2016-11-11T11:12:44.614Z,1478862764.614 [BPC1](ERROR): Communications Fault
2016-11-11T11:12:44.623Z,1478862764.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:44.698Z,1478862764.698 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:12:44.738Z,1478862764.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:44.809Z,1478862764.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:45.163Z,1478862765.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:45.228Z,1478862765.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:45.531Z,1478862765.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:45.569Z,1478862765.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:45.641Z,1478862765.641 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:12:45.641Z,1478862765.641 [BPC1] No Fault, FailCount= 1
2016-11-11T11:12:45.956Z,1478862765.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:46.084Z,1478862766.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:46.335Z,1478862766.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:46.409Z,1478862766.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:46.731Z,1478862766.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:46.806Z,1478862766.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:47.161Z,1478862767.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:47.186Z,1478862767.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:47.412Z,1478862767.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:47.538Z,1478862767.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:47.554Z,1478862767.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:47.942Z,1478862767.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:48.001Z,1478862768.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:48.208Z,1478862768.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:48.330Z,1478862768.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:48.418Z,1478862768.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:48.688Z,1478862768.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:48.737Z,1478862768.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:48.762Z,1478862768.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:49.131Z,1478862769.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:49.178Z,1478862769.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:49.484Z,1478862769.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:49.531Z,1478862769.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:49.590Z,1478862769.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:49.931Z,1478862769.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:49.951Z,1478862769.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:50.281Z,1478862770.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:50.336Z,1478862770.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:50.376Z,1478862770.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:50.731Z,1478862770.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:50.775Z,1478862770.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:51.016Z,1478862771.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:51.131Z,1478862771.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:51.171Z,1478862771.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:51.536Z,1478862771.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:51.556Z,1478862771.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:51.812Z,1478862771.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:51.944Z,1478862771.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:52.014Z,1478862772.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:52.331Z,1478862772.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:52.379Z,1478862772.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:52.609Z,1478862772.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:52.731Z,1478862772.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:52.781Z,1478862772.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:53.020Z,1478862773.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:53.131Z,1478862773.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:53.196Z,1478862773.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:53.539Z,1478862773.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:53.584Z,1478862773.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:53.817Z,1478862773.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:53.938Z,1478862773.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:53.961Z,1478862773.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:54.330Z,1478862774.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:54.382Z,1478862774.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:54.572Z,1478862774.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:54.731Z,1478862774.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:54.780Z,1478862774.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:55.131Z,1478862775.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:55.153Z,1478862775.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:55.368Z,1478862775.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:55.538Z,1478862775.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:55.558Z,1478862775.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:55.940Z,1478862775.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:55.964Z,1478862775.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:56.164Z,1478862776.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:56.331Z,1478862776.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:56.367Z,1478862776.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:56.572Z,1478862776.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:56.734Z,1478862776.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:56.754Z,1478862776.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:57.135Z,1478862777.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:57.175Z,1478862777.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:57.368Z,1478862777.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:57.542Z,1478862777.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:57.594Z,1478862777.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:57.931Z,1478862777.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:58.034Z,1478862778.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:58.164Z,1478862778.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:58.331Z,1478862778.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:58.375Z,1478862778.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:58.572Z,1478862778.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:58.736Z,1478862778.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:58.763Z,1478862778.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:59.131Z,1478862779.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:59.190Z,1478862779.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:59.368Z,1478862779.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:59.531Z,1478862779.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:59.554Z,1478862779.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:12:59.931Z,1478862779.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:12:59.981Z,1478862779.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:00.164Z,1478862780.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:00.331Z,1478862780.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:00.360Z,1478862780.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:00.572Z,1478862780.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:00.731Z,1478862780.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:00.794Z,1478862780.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:01.129Z,1478862781.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:01.144Z,1478862781.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:01.368Z,1478862781.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:01.533Z,1478862781.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:01.548Z,1478862781.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:01.932Z,1478862781.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:01.953Z,1478862781.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:02.164Z,1478862782.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:02.337Z,1478862782.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:02.357Z,1478862782.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:02.636Z,1478862782.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:02.730Z,1478862782.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:02.745Z,1478862782.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:03.134Z,1478862783.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:03.150Z,1478862783.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:03.432Z,1478862783.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:03.534Z,1478862783.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:03.549Z,1478862783.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:03.934Z,1478862783.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:03.949Z,1478862783.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:04.228Z,1478862784.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:04.333Z,1478862784.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:04.353Z,1478862784.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:04.729Z,1478862784.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:04.745Z,1478862784.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:05.024Z,1478862785.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:05.133Z,1478862785.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:05.150Z,1478862785.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:05.529Z,1478862785.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:05.545Z,1478862785.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:05.820Z,1478862785.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:05.933Z,1478862785.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:05.950Z,1478862785.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:06.334Z,1478862786.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:06.363Z,1478862786.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:06.616Z,1478862786.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:06.733Z,1478862786.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:06.748Z,1478862786.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:07.133Z,1478862787.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:07.148Z,1478862787.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:07.412Z,1478862787.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:07.529Z,1478862787.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:07.549Z,1478862787.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:07.933Z,1478862787.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:07.948Z,1478862787.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:08.208Z,1478862788.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:08.329Z,1478862788.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:08.349Z,1478862788.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:08.733Z,1478862788.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:08.753Z,1478862788.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:09.004Z,1478862789.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:09.129Z,1478862789.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:09.149Z,1478862789.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:09.533Z,1478862789.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:09.548Z,1478862789.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:09.802Z,1478862789.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:09.929Z,1478862789.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:09.945Z,1478862789.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:10.333Z,1478862790.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:10.353Z,1478862790.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:10.596Z,1478862790.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:10.729Z,1478862790.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:10.757Z,1478862790.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:11.137Z,1478862791.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:11.157Z,1478862791.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:11.392Z,1478862791.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:11.529Z,1478862791.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:11.544Z,1478862791.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:11.933Z,1478862791.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:11.953Z,1478862791.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:12.188Z,1478862792.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:12.355Z,1478862792.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:12.372Z,1478862792.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:12.733Z,1478862792.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:12.786Z,1478862792.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:12.984Z,1478862792.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:13.133Z,1478862793.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:13.148Z,1478862793.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:13.529Z,1478862793.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:13.577Z,1478862793.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:13.780Z,1478862793.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:13.932Z,1478862793.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:13.950Z,1478862793.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:14.329Z,1478862794.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:14.370Z,1478862794.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:14.576Z,1478862794.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:14.733Z,1478862794.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:14.781Z,1478862794.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:15.133Z,1478862795.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:15.148Z,1478862795.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:15.372Z,1478862795.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:15.537Z,1478862795.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:15.557Z,1478862795.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:15.929Z,1478862795.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:15.945Z,1478862795.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:16.168Z,1478862796.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:16.333Z,1478862796.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:16.348Z,1478862796.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:16.729Z,1478862796.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:16.749Z,1478862796.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:16.964Z,1478862796.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:17.133Z,1478862797.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:17.153Z,1478862797.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:17.530Z,1478862797.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:17.558Z,1478862797.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:17.760Z,1478862797.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:17.933Z,1478862797.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:17.948Z,1478862797.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:18.326Z,1478862798.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:18.341Z,1478862798.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:18.556Z,1478862798.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:18.729Z,1478862798.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:18.749Z,1478862798.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:19.133Z,1478862799.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:19.148Z,1478862799.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:19.352Z,1478862799.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:19.526Z,1478862799.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:19.541Z,1478862799.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:19.933Z,1478862799.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:19.948Z,1478862799.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:20.148Z,1478862800.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:20.329Z,1478862800.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:20.349Z,1478862800.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:20.733Z,1478862800.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:20.748Z,1478862800.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:20.944Z,1478862800.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:21.129Z,1478862801.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:21.144Z,1478862801.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:21.533Z,1478862801.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:21.548Z,1478862801.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:21.740Z,1478862801.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:21.933Z,1478862801.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:21.949Z,1478862801.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:22.333Z,1478862802.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:22.353Z,1478862802.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:22.536Z,1478862802.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:22.733Z,1478862802.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:22.748Z,1478862802.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:23.133Z,1478862803.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:23.148Z,1478862803.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:23.332Z,1478862803.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:23.533Z,1478862803.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:23.553Z,1478862803.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:23.933Z,1478862803.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:23.953Z,1478862803.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:24.128Z,1478862804.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:24.333Z,1478862804.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:24.349Z,1478862804.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:24.729Z,1478862804.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:24.783Z,1478862804.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:24.924Z,1478862804.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:25.131Z,1478862805.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:25.173Z,1478862805.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:25.332Z,1478862805.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:25.529Z,1478862805.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:25.553Z,1478862805.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:25.740Z,1478862805.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:25.929Z,1478862805.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:25.938Z,1478862805.938 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T11:13:25.938Z,1478862805.938 [BPC1] Data Fault, FailCount= 1
2016-11-11T11:13:25.938Z,1478862805.938 [BPC1](ERROR): Data Fault
2016-11-11T11:13:25.957Z,1478862805.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:26.002Z,1478862806.002 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T11:13:26.149Z,1478862806.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:26.330Z,1478862806.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:26.357Z,1478862806.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:26.556Z,1478862806.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:26.729Z,1478862806.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:26.761Z,1478862806.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:26.964Z,1478862806.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:27.129Z,1478862807.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:27.157Z,1478862807.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:27.207Z,1478862807.207 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:13:27.207Z,1478862807.207 [BPC1] No Fault, FailCount= 1
2016-11-11T11:13:27.372Z,1478862807.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:27.541Z,1478862807.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:27.637Z,1478862807.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:27.780Z,1478862807.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:27.929Z,1478862807.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:27.977Z,1478862807.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:28.188Z,1478862808.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:28.329Z,1478862808.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:28.357Z,1478862808.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:28.596Z,1478862808.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:28.729Z,1478862808.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:28.757Z,1478862808.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:29.008Z,1478862809.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:29.129Z,1478862809.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:29.153Z,1478862809.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:29.416Z,1478862809.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:29.529Z,1478862809.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:29.545Z,1478862809.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:29.824Z,1478862809.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:29.942Z,1478862809.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:29.961Z,1478862809.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:30.232Z,1478862810.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:30.329Z,1478862810.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:30.353Z,1478862810.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:30.640Z,1478862810.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:30.729Z,1478862810.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:30.757Z,1478862810.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:31.142Z,1478862811.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:31.161Z,1478862811.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:31.436Z,1478862811.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:31.530Z,1478862811.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:31.557Z,1478862811.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:31.929Z,1478862811.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:31.944Z,1478862811.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:32.232Z,1478862812.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:32.333Z,1478862812.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:32.348Z,1478862812.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:32.729Z,1478862812.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:32.749Z,1478862812.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:32.948Z,1478862812.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:33.137Z,1478862813.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:33.152Z,1478862813.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:33.535Z,1478862813.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:33.551Z,1478862813.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:33.744Z,1478862813.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:33.936Z,1478862813.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:33.951Z,1478862813.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:34.336Z,1478862814.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:34.357Z,1478862814.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:34.541Z,1478862814.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:34.744Z,1478862814.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:34.760Z,1478862814.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:34.952Z,1478862814.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:35.129Z,1478862815.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:35.163Z,1478862815.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:35.529Z,1478862815.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:35.561Z,1478862815.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:35.748Z,1478862815.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:35.929Z,1478862815.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:35.961Z,1478862815.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:36.329Z,1478862816.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:36.366Z,1478862816.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:36.472Z,1478862816.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:36.733Z,1478862816.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:36.760Z,1478862816.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:37.133Z,1478862817.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:37.169Z,1478862817.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:37.268Z,1478862817.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:37.529Z,1478862817.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:37.569Z,1478862817.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:37.929Z,1478862817.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:37.949Z,1478862817.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:38.065Z,1478862818.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:38.342Z,1478862818.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:38.357Z,1478862818.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:38.476Z,1478862818.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:39.272Z,1478862819.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:40.069Z,1478862820.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:40.488Z,1478862820.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:41.284Z,1478862821.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:41.705Z,1478862821.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:41.793Z,1478862821.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:41.887Z,1478862821.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:41.930Z,1478862821.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:42.081Z,1478862822.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:42.269Z,1478862822.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:42.295Z,1478862822.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:42.492Z,1478862822.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:42.669Z,1478862822.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:42.737Z,1478862822.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:43.069Z,1478862823.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:43.109Z,1478862823.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:43.288Z,1478862823.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:43.469Z,1478862823.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:43.510Z,1478862823.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:43.869Z,1478862823.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:43.917Z,1478862823.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:44.084Z,1478862824.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:44.277Z,1478862824.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:44.302Z,1478862824.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:44.564Z,1478862824.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:44.673Z,1478862824.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:44.698Z,1478862824.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:45.069Z,1478862825.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:45.101Z,1478862825.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:45.360Z,1478862825.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:45.469Z,1478862825.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:45.504Z,1478862825.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:45.869Z,1478862825.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:45.905Z,1478862825.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:46.156Z,1478862826.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:46.269Z,1478862826.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:46.305Z,1478862826.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:46.669Z,1478862826.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:46.711Z,1478862826.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:46.924Z,1478862826.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:47.069Z,1478862827.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:47.105Z,1478862827.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:47.469Z,1478862827.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:47.493Z,1478862827.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:47.720Z,1478862827.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:47.869Z,1478862827.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:47.905Z,1478862827.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:48.269Z,1478862828.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:48.305Z,1478862828.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:48.517Z,1478862828.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:48.680Z,1478862828.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:48.696Z,1478862828.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:48.928Z,1478862828.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:49.077Z,1478862829.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:49.092Z,1478862829.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:49.475Z,1478862829.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:49.497Z,1478862829.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:49.724Z,1478862829.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:49.876Z,1478862829.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:49.892Z,1478862829.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:50.275Z,1478862830.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:50.290Z,1478862830.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:50.452Z,1478862830.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:50.675Z,1478862830.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:50.694Z,1478862830.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:51.077Z,1478862831.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:51.097Z,1478862831.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:51.469Z,1478862831.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:51.501Z,1478862831.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:51.869Z,1478862831.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:51.901Z,1478862831.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:52.269Z,1478862832.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:52.301Z,1478862832.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:52.677Z,1478862832.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:52.702Z,1478862832.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:53.073Z,1478862833.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:53.101Z,1478862833.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:53.469Z,1478862833.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:53.501Z,1478862833.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:53.869Z,1478862833.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:53.905Z,1478862833.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:54.276Z,1478862834.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:54.303Z,1478862834.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:54.673Z,1478862834.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:54.706Z,1478862834.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:55.069Z,1478862835.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:55.105Z,1478862835.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:55.469Z,1478862835.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:55.501Z,1478862835.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:55.869Z,1478862835.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:55.945Z,1478862835.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:56.269Z,1478862836.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:56.312Z,1478862836.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:56.669Z,1478862836.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:56.714Z,1478862836.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:57.069Z,1478862837.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:57.084Z,1478862837.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:57.469Z,1478862837.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:57.510Z,1478862837.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:57.872Z,1478862837.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:57.925Z,1478862837.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:58.269Z,1478862838.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:58.293Z,1478862838.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:58.676Z,1478862838.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:58.691Z,1478862838.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:59.072Z,1478862839.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:59.101Z,1478862839.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:59.469Z,1478862839.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:59.504Z,1478862839.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:13:59.869Z,1478862839.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:13:59.893Z,1478862839.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:00.279Z,1478862840.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:00.295Z,1478862840.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:00.676Z,1478862840.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:00.691Z,1478862840.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:01.077Z,1478862841.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:01.097Z,1478862841.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:01.468Z,1478862841.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:01.502Z,1478862841.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:01.880Z,1478862841.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:01.896Z,1478862841.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:02.277Z,1478862842.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:02.297Z,1478862842.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:02.684Z,1478862842.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:02.705Z,1478862842.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:03.081Z,1478862843.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:03.101Z,1478862843.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:03.469Z,1478862843.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:03.501Z,1478862843.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:03.869Z,1478862843.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:03.894Z,1478862843.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:04.269Z,1478862844.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:04.301Z,1478862844.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:04.673Z,1478862844.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:04.713Z,1478862844.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:05.069Z,1478862845.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:05.101Z,1478862845.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:05.477Z,1478862845.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:05.503Z,1478862845.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:05.877Z,1478862845.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:05.909Z,1478862845.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:06.277Z,1478862846.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:06.303Z,1478862846.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:06.673Z,1478862846.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:06.699Z,1478862846.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:07.069Z,1478862847.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:07.101Z,1478862847.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:07.473Z,1478862847.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:07.498Z,1478862847.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:07.869Z,1478862847.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:07.889Z,1478862847.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:08.269Z,1478862848.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:08.297Z,1478862848.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:08.669Z,1478862848.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:08.701Z,1478862848.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:09.076Z,1478862849.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:09.099Z,1478862849.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:09.469Z,1478862849.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:09.502Z,1478862849.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:09.880Z,1478862849.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:09.901Z,1478862849.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:10.269Z,1478862850.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:10.349Z,1478862850.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:10.669Z,1478862850.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:10.702Z,1478862850.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:11.076Z,1478862851.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:11.139Z,1478862851.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:11.469Z,1478862851.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:11.501Z,1478862851.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:11.869Z,1478862851.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:11.918Z,1478862851.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:12.269Z,1478862852.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:12.326Z,1478862852.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:12.669Z,1478862852.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:12.697Z,1478862852.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:13.069Z,1478862853.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:13.112Z,1478862853.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:13.469Z,1478862853.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:13.509Z,1478862853.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:13.869Z,1478862853.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:13.884Z,1478862853.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:14.269Z,1478862854.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:14.289Z,1478862854.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:14.677Z,1478862854.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:14.713Z,1478862854.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:15.077Z,1478862855.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:15.097Z,1478862855.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:15.476Z,1478862855.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:15.497Z,1478862855.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:15.876Z,1478862855.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:15.905Z,1478862855.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:16.278Z,1478862856.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:16.294Z,1478862856.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:16.686Z,1478862856.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:16.701Z,1478862856.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:17.077Z,1478862857.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:17.097Z,1478862857.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:17.469Z,1478862857.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:17.505Z,1478862857.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:17.869Z,1478862857.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:17.904Z,1478862857.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:18.269Z,1478862858.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:18.303Z,1478862858.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:18.669Z,1478862858.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:18.702Z,1478862858.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:19.069Z,1478862859.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:19.103Z,1478862859.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:19.480Z,1478862859.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:19.505Z,1478862859.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:19.869Z,1478862859.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:19.901Z,1478862859.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:20.269Z,1478862860.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:20.310Z,1478862860.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:20.669Z,1478862860.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:20.697Z,1478862860.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:21.069Z,1478862861.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:21.113Z,1478862861.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:21.473Z,1478862861.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:21.498Z,1478862861.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:21.869Z,1478862861.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:21.906Z,1478862861.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:22.277Z,1478862862.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:22.313Z,1478862862.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:22.669Z,1478862862.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:22.689Z,1478862862.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:23.069Z,1478862863.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:23.089Z,1478862863.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:23.473Z,1478862863.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:23.488Z,1478862863.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:23.876Z,1478862863.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:23.941Z,1478862863.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:24.269Z,1478862864.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:24.325Z,1478862864.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:24.669Z,1478862864.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:24.705Z,1478862864.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:25.069Z,1478862865.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:25.121Z,1478862865.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:25.469Z,1478862865.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:25.512Z,1478862865.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:25.869Z,1478862865.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:25.921Z,1478862865.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:26.285Z,1478862866.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:26.331Z,1478862866.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:26.672Z,1478862866.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:26.693Z,1478862866.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:27.072Z,1478862867.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:27.088Z,1478862867.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:27.476Z,1478862867.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:27.491Z,1478862867.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:27.875Z,1478862867.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:27.890Z,1478862867.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:28.272Z,1478862868.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:28.301Z,1478862868.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:28.676Z,1478862868.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:28.697Z,1478862868.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:29.077Z,1478862869.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:29.097Z,1478862869.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:29.477Z,1478862869.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:29.493Z,1478862869.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:29.869Z,1478862869.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:29.902Z,1478862869.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:30.269Z,1478862870.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:30.302Z,1478862870.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:30.669Z,1478862870.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:30.694Z,1478862870.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:31.069Z,1478862871.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:31.102Z,1478862871.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:31.469Z,1478862871.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:31.502Z,1478862871.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:31.869Z,1478862871.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:31.901Z,1478862871.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:32.269Z,1478862872.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:32.293Z,1478862872.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:32.669Z,1478862872.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:32.702Z,1478862872.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:33.069Z,1478862873.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:33.094Z,1478862873.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:33.469Z,1478862873.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:33.505Z,1478862873.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:33.869Z,1478862873.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:33.901Z,1478862873.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:34.277Z,1478862874.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:34.309Z,1478862874.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:34.673Z,1478862874.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:34.705Z,1478862874.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:35.073Z,1478862875.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:35.105Z,1478862875.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:35.473Z,1478862875.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:35.488Z,1478862875.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:35.880Z,1478862875.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:35.918Z,1478862875.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:36.271Z,1478862876.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:36.311Z,1478862876.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:36.679Z,1478862876.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:36.695Z,1478862876.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:37.076Z,1478862877.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:37.091Z,1478862877.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:37.476Z,1478862877.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:37.509Z,1478862877.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:37.869Z,1478862877.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:37.901Z,1478862877.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:38.269Z,1478862878.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:38.305Z,1478862878.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:38.673Z,1478862878.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:38.749Z,1478862878.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:42.017Z,1478862882.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:42.033Z,1478862882.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:42.144Z,1478862882.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:42.171Z,1478862882.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:42.501Z,1478862882.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:42.526Z,1478862882.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:42.901Z,1478862882.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:42.953Z,1478862882.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:43.301Z,1478862883.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:43.333Z,1478862883.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:43.701Z,1478862883.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:43.750Z,1478862883.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:44.101Z,1478862884.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:44.137Z,1478862884.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:44.506Z,1478862884.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:44.554Z,1478862884.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:44.901Z,1478862884.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:44.941Z,1478862884.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:45.301Z,1478862885.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:45.316Z,1478862885.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:45.701Z,1478862885.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:45.716Z,1478862885.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:46.101Z,1478862886.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:46.121Z,1478862886.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:46.505Z,1478862886.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:46.520Z,1478862886.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:46.907Z,1478862886.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:46.923Z,1478862886.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:47.308Z,1478862887.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:47.329Z,1478862887.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:47.708Z,1478862887.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:47.729Z,1478862887.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:48.101Z,1478862888.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:48.126Z,1478862888.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:48.501Z,1478862888.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:48.535Z,1478862888.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:48.901Z,1478862888.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:48.945Z,1478862888.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:49.301Z,1478862889.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:49.317Z,1478862889.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:49.701Z,1478862889.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:49.721Z,1478862889.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:50.101Z,1478862890.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:50.121Z,1478862890.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:50.504Z,1478862890.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:50.520Z,1478862890.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:50.908Z,1478862890.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:50.923Z,1478862890.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:51.307Z,1478862891.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:51.329Z,1478862891.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:51.712Z,1478862891.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:51.728Z,1478862891.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:52.116Z,1478862892.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:52.131Z,1478862892.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:52.509Z,1478862892.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:52.524Z,1478862892.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:52.908Z,1478862892.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:52.928Z,1478862892.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:53.312Z,1478862893.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:53.327Z,1478862893.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:53.709Z,1478862893.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:53.729Z,1478862893.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:54.111Z,1478862894.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:54.144Z,1478862894.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:54.505Z,1478862894.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:54.537Z,1478862894.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:54.901Z,1478862894.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:54.934Z,1478862894.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:55.305Z,1478862895.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:55.337Z,1478862895.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:55.705Z,1478862895.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:55.737Z,1478862895.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:56.105Z,1478862896.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:56.131Z,1478862896.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:56.501Z,1478862896.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:56.565Z,1478862896.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:56.901Z,1478862896.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:56.961Z,1478862896.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:57.301Z,1478862897.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:57.321Z,1478862897.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:57.701Z,1478862897.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:57.721Z,1478862897.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:58.101Z,1478862898.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:58.153Z,1478862898.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:58.501Z,1478862898.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:58.521Z,1478862898.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:58.905Z,1478862898.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:58.956Z,1478862898.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:59.308Z,1478862899.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:59.323Z,1478862899.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:14:59.708Z,1478862899.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:14:59.756Z,1478862899.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:00.104Z,1478862900.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:00.120Z,1478862900.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:00.503Z,1478862900.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:00.535Z,1478862900.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:00.905Z,1478862900.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:00.926Z,1478862900.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:01.308Z,1478862901.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:01.324Z,1478862901.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:01.709Z,1478862901.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:01.729Z,1478862901.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:02.116Z,1478862902.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:02.131Z,1478862902.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:02.509Z,1478862902.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:02.525Z,1478862902.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:02.909Z,1478862902.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:02.929Z,1478862902.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:03.304Z,1478862903.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:03.330Z,1478862903.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:03.701Z,1478862903.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:03.733Z,1478862903.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:04.116Z,1478862904.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:04.132Z,1478862904.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:04.505Z,1478862904.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:04.531Z,1478862904.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:04.901Z,1478862904.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:04.925Z,1478862904.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:05.301Z,1478862905.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:05.340Z,1478862905.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:05.701Z,1478862905.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:05.734Z,1478862905.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:06.109Z,1478862906.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:06.141Z,1478862906.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:06.501Z,1478862906.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:06.521Z,1478862906.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:06.901Z,1478862906.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:06.921Z,1478862906.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:07.305Z,1478862907.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:07.320Z,1478862907.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:07.707Z,1478862907.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:07.729Z,1478862907.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:08.108Z,1478862908.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:08.129Z,1478862908.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:08.504Z,1478862908.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:08.537Z,1478862908.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:08.909Z,1478862908.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:08.929Z,1478862908.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:09.312Z,1478862909.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:09.328Z,1478862909.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:09.705Z,1478862909.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:09.737Z,1478862909.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:10.113Z,1478862910.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:10.128Z,1478862910.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:10.513Z,1478862910.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:10.528Z,1478862910.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:10.908Z,1478862910.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:10.923Z,1478862910.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:11.309Z,1478862911.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:11.329Z,1478862911.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:11.708Z,1478862911.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:11.781Z,1478862911.781 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:11.781Z,1478862911.782 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 109
2016-11-11T11:15:11.782Z,1478862911.782 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:15:11.792Z,1478862911.792 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:11.793Z,1478862911.793 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 109
2016-11-11T11:15:11.793Z,1478862911.793 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:15:11.795Z,1478862911.795 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:11.795Z,1478862911.795 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 109
2016-11-11T11:15:11.795Z,1478862911.795 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:15:11.830Z,1478862911.830 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:15:11.830Z,1478862911.830 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:15:11.831Z,1478862911.830 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:15:12.101Z,1478862912.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:12.150Z,1478862912.150 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:15:12.150Z,1478862912.150 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 109
2016-11-11T11:15:12.151Z,1478862912.151 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:15:12.151Z,1478862912.151 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 109
2016-11-11T11:15:12.152Z,1478862912.152 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:15:12.152Z,1478862912.152 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 109
2016-11-11T11:15:12.501Z,1478862912.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:12.552Z,1478862912.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:15:12.553Z,1478862912.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:15:12.553Z,1478862912.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:15:12.558Z,1478862912.558 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:15:12.558Z,1478862912.558 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:15:12.559Z,1478862912.559 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:15:12.559Z,1478862912.559 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:15:12.560Z,1478862912.560 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:15:12.560Z,1478862912.560 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:15:12.909Z,1478862912.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:12.942Z,1478862912.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:13.301Z,1478862913.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:13.353Z,1478862913.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:13.701Z,1478862913.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:13.746Z,1478862913.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:14.109Z,1478862914.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:14.141Z,1478862914.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:14.509Z,1478862914.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:14.541Z,1478862914.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:14.901Z,1478862914.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:14.945Z,1478862914.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:15.301Z,1478862915.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:15.337Z,1478862915.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:15.706Z,1478862915.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:15.726Z,1478862915.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:16.115Z,1478862916.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:16.140Z,1478862916.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:16.512Z,1478862916.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:16.528Z,1478862916.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:16.908Z,1478862916.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:16.924Z,1478862916.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:17.302Z,1478862917.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:17.328Z,1478862917.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:17.702Z,1478862917.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:17.729Z,1478862917.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:18.117Z,1478862918.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:18.133Z,1478862918.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:18.502Z,1478862918.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:18.557Z,1478862918.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:18.901Z,1478862918.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:18.917Z,1478862918.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:19.301Z,1478862919.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:19.321Z,1478862919.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:19.706Z,1478862919.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:19.722Z,1478862919.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:20.113Z,1478862920.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:20.129Z,1478862920.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:20.507Z,1478862920.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:20.524Z,1478862920.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:20.908Z,1478862920.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:20.930Z,1478862920.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:21.308Z,1478862921.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:21.330Z,1478862921.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:21.708Z,1478862921.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:21.724Z,1478862921.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:22.117Z,1478862922.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:22.133Z,1478862922.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:22.501Z,1478862922.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:22.535Z,1478862922.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:22.901Z,1478862922.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:22.937Z,1478862922.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:23.301Z,1478862923.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:23.337Z,1478862923.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:23.701Z,1478862923.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:23.737Z,1478862923.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:24.105Z,1478862924.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:24.137Z,1478862924.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:24.509Z,1478862924.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:24.545Z,1478862924.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:24.912Z,1478862924.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:24.927Z,1478862924.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:25.307Z,1478862925.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:25.322Z,1478862925.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:25.708Z,1478862925.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:25.724Z,1478862925.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:26.108Z,1478862926.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:26.142Z,1478862926.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:26.509Z,1478862926.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:26.525Z,1478862926.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:26.901Z,1478862926.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:26.949Z,1478862926.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:27.301Z,1478862927.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:27.336Z,1478862927.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:27.701Z,1478862927.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:27.749Z,1478862927.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:28.101Z,1478862928.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:28.146Z,1478862928.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:28.501Z,1478862928.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:28.537Z,1478862928.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:28.901Z,1478862928.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:28.938Z,1478862928.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:29.301Z,1478862929.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:29.339Z,1478862929.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:29.701Z,1478862929.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:29.736Z,1478862929.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:30.109Z,1478862930.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:30.141Z,1478862930.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:30.501Z,1478862930.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:30.544Z,1478862930.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:30.901Z,1478862930.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:30.916Z,1478862930.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:31.301Z,1478862931.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:31.332Z,1478862931.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:31.704Z,1478862931.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:31.725Z,1478862931.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:32.101Z,1478862932.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:32.129Z,1478862932.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:32.508Z,1478862932.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:32.524Z,1478862932.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:32.908Z,1478862932.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:32.923Z,1478862932.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:33.301Z,1478862933.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:33.334Z,1478862933.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:33.701Z,1478862933.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:33.733Z,1478862933.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:34.116Z,1478862934.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:34.131Z,1478862934.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:34.505Z,1478862934.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:34.530Z,1478862934.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:34.901Z,1478862934.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:34.933Z,1478862934.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:35.301Z,1478862935.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:35.333Z,1478862935.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:35.701Z,1478862935.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:35.733Z,1478862935.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:36.116Z,1478862936.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:36.137Z,1478862936.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:36.501Z,1478862936.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:36.535Z,1478862936.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:36.901Z,1478862936.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:36.933Z,1478862936.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:37.300Z,1478862937.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:37.327Z,1478862937.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:37.701Z,1478862937.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:37.721Z,1478862937.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:38.105Z,1478862938.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:38.145Z,1478862938.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:38.513Z,1478862938.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:38.562Z,1478862938.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:38.912Z,1478862938.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:38.928Z,1478862938.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:42.409Z,1478862942.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:42.477Z,1478862942.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:42.574Z,1478862942.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:42.637Z,1478862942.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:42.945Z,1478862942.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:42.977Z,1478862942.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:43.341Z,1478862943.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:43.370Z,1478862943.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:43.737Z,1478862943.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:43.753Z,1478862943.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:44.152Z,1478862944.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:44.208Z,1478862944.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:44.540Z,1478862944.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:44.560Z,1478862944.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:44.944Z,1478862944.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:45.005Z,1478862945.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:45.345Z,1478862945.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:45.398Z,1478862945.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:45.748Z,1478862945.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:45.764Z,1478862945.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:46.137Z,1478862946.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:46.173Z,1478862946.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:46.537Z,1478862946.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:46.573Z,1478862946.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:46.941Z,1478862946.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:46.973Z,1478862946.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:47.337Z,1478862947.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:47.373Z,1478862947.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:47.737Z,1478862947.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:47.773Z,1478862947.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:48.149Z,1478862948.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:48.164Z,1478862948.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:48.544Z,1478862948.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:48.560Z,1478862948.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:48.945Z,1478862948.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:48.962Z,1478862948.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:49.347Z,1478862949.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:49.363Z,1478862949.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:49.744Z,1478862949.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:49.760Z,1478862949.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:50.145Z,1478862950.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:50.165Z,1478862950.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:50.544Z,1478862950.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:50.567Z,1478862950.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:50.937Z,1478862950.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:50.972Z,1478862950.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:51.337Z,1478862951.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:51.371Z,1478862951.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:51.744Z,1478862951.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:51.767Z,1478862951.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:52.141Z,1478862952.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:52.168Z,1478862952.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:52.537Z,1478862952.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:52.569Z,1478862952.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:52.937Z,1478862952.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:52.970Z,1478862952.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:53.337Z,1478862953.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:53.374Z,1478862953.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:53.741Z,1478862953.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:53.768Z,1478862953.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:54.153Z,1478862954.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:54.168Z,1478862954.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:54.545Z,1478862954.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:54.561Z,1478862954.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:54.952Z,1478862954.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:54.970Z,1478862954.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:54.989Z,1478862954.989 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T11:15:55.348Z,1478862955.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:55.372Z,1478862955.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:55.741Z,1478862955.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:55.774Z,1478862955.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:56.137Z,1478862956.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:56.185Z,1478862956.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:56.548Z,1478862956.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:56.564Z,1478862956.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:56.944Z,1478862956.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:56.960Z,1478862956.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:57.337Z,1478862957.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:57.397Z,1478862957.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:57.752Z,1478862957.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:57.768Z,1478862957.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:58.137Z,1478862958.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:58.185Z,1478862958.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:58.542Z,1478862958.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:58.561Z,1478862958.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:58.945Z,1478862958.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:59.042Z,1478862959.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:59.343Z,1478862959.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:59.392Z,1478862959.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:15:59.744Z,1478862959.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:15:59.759Z,1478862959.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:00.140Z,1478862960.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:00.173Z,1478862960.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:00.538Z,1478862960.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:00.570Z,1478862960.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:00.938Z,1478862960.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:00.973Z,1478862960.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:01.338Z,1478862961.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:01.370Z,1478862961.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:01.737Z,1478862961.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:01.773Z,1478862961.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:02.141Z,1478862962.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:02.174Z,1478862962.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:02.537Z,1478862962.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:02.572Z,1478862962.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:02.937Z,1478862962.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:02.970Z,1478862962.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:03.337Z,1478862963.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:03.381Z,1478862963.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:03.737Z,1478862963.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:03.773Z,1478862963.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:04.145Z,1478862964.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:04.184Z,1478862964.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:04.537Z,1478862964.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:04.557Z,1478862964.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:04.941Z,1478862964.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:04.996Z,1478862964.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:05.344Z,1478862965.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:05.360Z,1478862965.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:05.744Z,1478862965.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:05.759Z,1478862965.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:06.139Z,1478862966.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:06.165Z,1478862966.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:06.544Z,1478862966.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:06.565Z,1478862966.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:06.937Z,1478862966.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:06.971Z,1478862966.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:07.337Z,1478862967.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:07.369Z,1478862967.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:07.736Z,1478862967.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:07.761Z,1478862967.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:08.137Z,1478862968.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:08.177Z,1478862968.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:08.552Z,1478862968.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:08.573Z,1478862968.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:08.937Z,1478862968.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:08.965Z,1478862968.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:09.337Z,1478862969.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:09.373Z,1478862969.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:09.741Z,1478862969.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:09.777Z,1478862969.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:10.137Z,1478862970.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:10.197Z,1478862970.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:10.545Z,1478862970.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:10.577Z,1478862970.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:10.943Z,1478862970.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:10.959Z,1478862970.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:11.342Z,1478862971.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:11.389Z,1478862971.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:11.744Z,1478862971.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:11.765Z,1478862971.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:12.144Z,1478862972.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:12.159Z,1478862972.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:12.544Z,1478862972.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:12.608Z,1478862972.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:12.937Z,1478862972.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:12.971Z,1478862972.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:13.337Z,1478862973.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:13.378Z,1478862973.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:13.737Z,1478862973.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:13.849Z,1478862973.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:14.137Z,1478862974.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:14.165Z,1478862974.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:14.545Z,1478862974.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:14.565Z,1478862974.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:14.944Z,1478862974.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:14.960Z,1478862974.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:15.337Z,1478862975.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:15.371Z,1478862975.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:15.737Z,1478862975.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:15.773Z,1478862975.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:16.141Z,1478862976.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:16.177Z,1478862976.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:16.537Z,1478862976.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:16.580Z,1478862976.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:16.938Z,1478862976.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:16.953Z,1478862976.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:17.337Z,1478862977.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:17.360Z,1478862977.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:17.740Z,1478862977.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:17.761Z,1478862977.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:18.144Z,1478862978.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:18.165Z,1478862978.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:18.543Z,1478862978.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:18.558Z,1478862978.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:18.943Z,1478862978.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:18.965Z,1478862978.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:19.344Z,1478862979.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:19.359Z,1478862979.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:19.744Z,1478862979.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:19.760Z,1478862979.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:20.152Z,1478862980.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:20.173Z,1478862980.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:20.543Z,1478862980.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:20.558Z,1478862980.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:20.948Z,1478862980.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:20.964Z,1478862980.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:21.337Z,1478862981.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:21.362Z,1478862981.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:21.737Z,1478862981.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:21.771Z,1478862981.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:22.137Z,1478862982.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:22.171Z,1478862982.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:22.537Z,1478862982.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:22.557Z,1478862982.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:22.945Z,1478862982.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:22.960Z,1478862982.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:23.348Z,1478862983.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:23.363Z,1478862983.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:23.751Z,1478862983.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:23.838Z,1478862983.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:24.137Z,1478862984.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:24.181Z,1478862984.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:24.537Z,1478862984.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:24.595Z,1478862984.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:24.938Z,1478862984.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:24.972Z,1478862984.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:25.340Z,1478862985.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:25.361Z,1478862985.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:25.742Z,1478862985.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:25.758Z,1478862985.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:26.149Z,1478862986.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:26.221Z,1478862986.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:26.537Z,1478862986.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:26.571Z,1478862986.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:26.945Z,1478862986.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:26.997Z,1478862986.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:27.340Z,1478862987.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:27.361Z,1478862987.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:27.740Z,1478862987.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:27.820Z,1478862987.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:28.141Z,1478862988.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:28.211Z,1478862988.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:28.537Z,1478862988.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:28.573Z,1478862988.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:28.941Z,1478862988.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:28.973Z,1478862988.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:29.345Z,1478862989.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:29.371Z,1478862989.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:29.737Z,1478862989.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:29.825Z,1478862989.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:30.144Z,1478862990.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:30.162Z,1478862990.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:30.543Z,1478862990.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:30.559Z,1478862990.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:30.944Z,1478862990.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:30.959Z,1478862990.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:31.344Z,1478862991.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:31.359Z,1478862991.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:31.737Z,1478862991.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:31.766Z,1478862991.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:32.152Z,1478862992.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:32.173Z,1478862992.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:32.537Z,1478862992.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:32.552Z,1478862992.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:32.946Z,1478862992.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:32.973Z,1478862992.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:33.340Z,1478862993.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:33.361Z,1478862993.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:33.742Z,1478862993.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:33.761Z,1478862993.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:34.145Z,1478862994.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:34.185Z,1478862994.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:34.544Z,1478862994.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:34.569Z,1478862994.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:34.939Z,1478862994.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:34.976Z,1478862994.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:35.348Z,1478862995.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:35.364Z,1478862995.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:35.737Z,1478862995.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:35.775Z,1478862995.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:36.137Z,1478862996.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:36.177Z,1478862996.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:36.550Z,1478862996.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:36.584Z,1478862996.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:36.945Z,1478862996.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:36.988Z,1478862996.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:37.342Z,1478862997.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:37.361Z,1478862997.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:37.745Z,1478862997.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:37.828Z,1478862997.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:37.854Z,1478862997.854 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T11:16:37.854Z,1478862997.855 [Default:CheckIn:C.Wait] Stopped
2016-11-11T11:16:37.855Z,1478862997.855 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T11:16:37.855Z,1478862997.855 [Default:CheckIn:D] Running Loop=1
2016-11-11T11:16:38.140Z,1478862998.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:38.149Z,1478862998.149 [PNI_TCM](ERROR): CRC does not match. Expected:0x15758 got:0x6591
2016-11-11T11:16:38.173Z,1478862998.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:38.190Z,1478862998.190 [Default:CheckIn:D] Stopped
2016-11-11T11:16:38.190Z,1478862998.190 [Default:CheckIn:E] Running Loop=1
2016-11-11T11:16:38.551Z,1478862998.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:38.582Z,1478862998.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:38.609Z,1478862998.609 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 386.614681 min 
2016-11-11T11:16:38.610Z,1478862998.610 [Default:CheckIn:E] Stopped
2016-11-11T11:16:38.610Z,1478862998.610 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T11:16:38.610Z,1478862998.610 [Default:CheckIn] Stopped
2016-11-11T11:16:38.610Z,1478862998.610 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T11:16:38.610Z,1478862998.610 [Default:CheckIn](INFO): Running loop #38
2016-11-11T11:16:38.610Z,1478862998.611 [Default:CheckIn] Running Loop=38
2016-11-11T11:16:38.611Z,1478862998.611 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T11:16:38.611Z,1478862998.611 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T11:16:38.937Z,1478862998.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:38.985Z,1478862998.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:42.378Z,1478863002.378 [NAL9602](INFO): Powering up
2016-11-11T11:16:42.396Z,1478863002.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:42.449Z,1478863002.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:42.560Z,1478863002.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:42.588Z,1478863002.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:42.959Z,1478863002.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:42.995Z,1478863002.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:43.358Z,1478863003.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:43.452Z,1478863003.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:43.773Z,1478863003.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:43.804Z,1478863003.804 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T11:16:43.858Z,1478863003.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:44.167Z,1478863004.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:44.221Z,1478863004.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:44.562Z,1478863004.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:44.616Z,1478863004.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:44.954Z,1478863004.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:44.990Z,1478863004.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:45.354Z,1478863005.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:45.381Z,1478863005.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:45.772Z,1478863005.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:45.787Z,1478863005.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:46.155Z,1478863006.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:46.170Z,1478863006.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:46.553Z,1478863006.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:46.596Z,1478863006.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:46.961Z,1478863006.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:46.976Z,1478863006.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:47.362Z,1478863007.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:47.378Z,1478863007.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:47.763Z,1478863007.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:47.778Z,1478863007.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:48.161Z,1478863008.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:48.178Z,1478863008.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:48.554Z,1478863008.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:48.578Z,1478863008.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:48.965Z,1478863008.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:48.985Z,1478863008.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:49.360Z,1478863009.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:49.375Z,1478863009.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:49.762Z,1478863009.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:49.779Z,1478863009.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:50.155Z,1478863010.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:50.189Z,1478863010.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:50.555Z,1478863010.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:50.589Z,1478863010.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:50.954Z,1478863010.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:50.985Z,1478863010.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:51.354Z,1478863011.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:51.389Z,1478863011.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:51.776Z,1478863011.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:51.845Z,1478863011.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:52.158Z,1478863012.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:52.174Z,1478863012.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:52.561Z,1478863012.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:52.608Z,1478863012.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:52.973Z,1478863012.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:52.996Z,1478863012.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:53.341Z,1478863013.341 [NAL9602](INFO): NAL9602 initialized
2016-11-11T11:16:53.360Z,1478863013.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:53.397Z,1478863013.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:53.792Z,1478863013.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:53.810Z,1478863013.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:54.144Z,1478863014.144 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T11:16:54.144Z,1478863014.144 [NAL9602] Data Fault, FailCount= 3
2016-11-11T11:16:54.144Z,1478863014.144 [NAL9602](ERROR): Data Fault
2016-11-11T11:16:54.162Z,1478863014.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:54.177Z,1478863014.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:54.221Z,1478863014.221 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T11:16:54.536Z,1478863014.536 [NAL9602](INFO): Powering down
2016-11-11T11:16:54.559Z,1478863014.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:54.587Z,1478863014.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:54.966Z,1478863014.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:54.989Z,1478863014.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:55.361Z,1478863015.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:55.429Z,1478863015.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:55.461Z,1478863015.461 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T11:16:55.461Z,1478863015.461 [NAL9602] No Fault, FailCount= 3
2016-11-11T11:16:55.769Z,1478863015.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:55.837Z,1478863015.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:56.155Z,1478863016.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:56.183Z,1478863016.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:56.555Z,1478863016.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:56.571Z,1478863016.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:56.956Z,1478863016.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:56.995Z,1478863016.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:57.359Z,1478863017.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:57.381Z,1478863017.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:57.775Z,1478863017.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:57.837Z,1478863017.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:58.155Z,1478863018.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:58.189Z,1478863018.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:58.553Z,1478863018.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:58.607Z,1478863018.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:58.953Z,1478863018.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:58.989Z,1478863018.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:59.355Z,1478863019.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:59.404Z,1478863019.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:16:59.738Z,1478863019.738 [NAL9602](INFO): Powering up NAL9602
2016-11-11T11:16:59.756Z,1478863019.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:16:59.787Z,1478863019.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:00.159Z,1478863020.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:00.174Z,1478863020.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:00.553Z,1478863020.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:00.578Z,1478863020.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:00.960Z,1478863020.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:00.989Z,1478863020.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:01.354Z,1478863021.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:01.384Z,1478863021.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:01.757Z,1478863021.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:01.783Z,1478863021.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:02.153Z,1478863022.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:02.199Z,1478863022.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:02.555Z,1478863022.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:02.583Z,1478863022.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:02.953Z,1478863022.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:02.969Z,1478863022.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:03.356Z,1478863023.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:03.393Z,1478863023.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:03.760Z,1478863023.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:03.775Z,1478863023.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:04.155Z,1478863024.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:04.236Z,1478863024.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:04.553Z,1478863024.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:04.585Z,1478863024.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:04.957Z,1478863024.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:04.982Z,1478863024.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:05.353Z,1478863025.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:05.380Z,1478863025.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:05.763Z,1478863025.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:05.833Z,1478863025.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:06.161Z,1478863026.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:06.181Z,1478863026.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:06.553Z,1478863026.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:06.588Z,1478863026.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:06.953Z,1478863026.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:06.989Z,1478863026.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:07.354Z,1478863027.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:07.385Z,1478863027.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:07.789Z,1478863027.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:07.834Z,1478863027.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:08.153Z,1478863028.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:08.190Z,1478863028.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:08.558Z,1478863028.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:08.592Z,1478863028.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:08.961Z,1478863028.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:08.988Z,1478863028.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:09.361Z,1478863029.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:09.387Z,1478863029.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:09.765Z,1478863029.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:09.806Z,1478863029.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:10.164Z,1478863030.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:10.230Z,1478863030.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:10.537Z,1478863030.537 [NAL9602](INFO): NAL9602 initialized
2016-11-11T11:17:10.554Z,1478863030.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:10.569Z,1478863030.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:10.961Z,1478863030.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:10.976Z,1478863030.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:11.368Z,1478863031.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:11.416Z,1478863031.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:11.779Z,1478863031.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:11.848Z,1478863031.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:12.168Z,1478863032.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:12.183Z,1478863032.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:12.556Z,1478863032.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:12.610Z,1478863032.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:12.956Z,1478863032.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:12.988Z,1478863032.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:13.354Z,1478863033.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:13.404Z,1478863033.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:13.771Z,1478863033.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:13.849Z,1478863033.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:14.157Z,1478863034.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:14.177Z,1478863034.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:14.561Z,1478863034.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:14.576Z,1478863034.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:14.958Z,1478863034.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:14.986Z,1478863034.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:15.364Z,1478863035.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:15.380Z,1478863035.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:15.762Z,1478863035.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:15.777Z,1478863035.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:16.175Z,1478863036.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:16.257Z,1478863036.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:16.554Z,1478863036.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:16.589Z,1478863036.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:16.953Z,1478863036.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:16.968Z,1478863036.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:17.354Z,1478863037.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:17.370Z,1478863037.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:17.757Z,1478863037.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:17.781Z,1478863037.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:18.194Z,1478863038.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:18.281Z,1478863038.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:18.569Z,1478863038.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:18.607Z,1478863038.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:18.964Z,1478863038.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:18.997Z,1478863038.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:19.365Z,1478863039.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:19.380Z,1478863039.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:19.769Z,1478863039.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:19.827Z,1478863039.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:20.165Z,1478863040.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:20.181Z,1478863040.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:20.553Z,1478863040.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:20.586Z,1478863040.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:20.953Z,1478863040.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:20.990Z,1478863040.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:21.353Z,1478863041.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:21.389Z,1478863041.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:21.764Z,1478863041.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:21.828Z,1478863041.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:22.156Z,1478863042.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:22.189Z,1478863042.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:22.553Z,1478863042.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:22.587Z,1478863042.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:22.981Z,1478863042.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:23.007Z,1478863043.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:23.368Z,1478863043.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:23.394Z,1478863043.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:23.786Z,1478863043.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:23.822Z,1478863043.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:24.154Z,1478863044.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:24.169Z,1478863044.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:24.561Z,1478863044.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:24.617Z,1478863044.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:24.958Z,1478863044.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:24.973Z,1478863044.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:25.361Z,1478863045.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:25.376Z,1478863045.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:25.779Z,1478863045.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:25.819Z,1478863045.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:26.157Z,1478863046.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:26.217Z,1478863046.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:26.554Z,1478863046.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:26.585Z,1478863046.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:26.959Z,1478863046.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:26.985Z,1478863046.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:27.357Z,1478863047.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:27.424Z,1478863047.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:27.754Z,1478863047.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:27.852Z,1478863047.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:28.157Z,1478863048.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:28.208Z,1478863048.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:28.559Z,1478863048.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:28.612Z,1478863048.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:28.962Z,1478863048.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:28.981Z,1478863048.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:29.358Z,1478863049.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:29.385Z,1478863049.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:29.760Z,1478863049.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:29.781Z,1478863049.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:30.208Z,1478863050.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:30.240Z,1478863050.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:30.561Z,1478863050.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:30.577Z,1478863050.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:30.961Z,1478863050.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:30.976Z,1478863050.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:31.361Z,1478863051.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:31.377Z,1478863051.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:31.768Z,1478863051.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:31.797Z,1478863051.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:32.201Z,1478863052.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:32.249Z,1478863052.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:32.553Z,1478863052.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:32.593Z,1478863052.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:32.958Z,1478863052.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:32.975Z,1478863052.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:33.364Z,1478863053.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:33.380Z,1478863053.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:33.764Z,1478863053.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:33.795Z,1478863053.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:34.153Z,1478863054.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:34.185Z,1478863054.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:34.557Z,1478863054.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:34.589Z,1478863054.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:34.954Z,1478863054.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:34.990Z,1478863054.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:35.353Z,1478863055.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:35.394Z,1478863055.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:35.772Z,1478863055.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:35.794Z,1478863055.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:36.172Z,1478863056.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:36.212Z,1478863056.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:36.554Z,1478863056.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:36.570Z,1478863056.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:36.963Z,1478863056.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:37.009Z,1478863057.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:37.363Z,1478863057.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:37.387Z,1478863057.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:37.756Z,1478863057.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:37.831Z,1478863057.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:38.159Z,1478863058.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:38.229Z,1478863058.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:38.581Z,1478863058.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:38.625Z,1478863058.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:38.968Z,1478863058.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:38.997Z,1478863058.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:45.896Z,1478863065.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:45.909Z,1478863065.909 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:17:45.910Z,1478863065.909 [BPC1] Communications Fault, FailCount= 1
2016-11-11T11:17:45.910Z,1478863065.910 [BPC1](ERROR): Communications Fault
2016-11-11T11:17:45.955Z,1478863065.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:45.992Z,1478863065.991 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:17:46.072Z,1478863066.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:46.106Z,1478863066.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:46.429Z,1478863066.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:46.473Z,1478863066.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:46.822Z,1478863066.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:46.882Z,1478863066.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:46.922Z,1478863066.922 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:17:46.922Z,1478863066.922 [BPC1] No Fault, FailCount= 1
2016-11-11T11:17:47.221Z,1478863067.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:47.333Z,1478863067.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:47.621Z,1478863067.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:47.706Z,1478863067.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:48.021Z,1478863068.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:48.061Z,1478863068.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:48.426Z,1478863068.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:48.485Z,1478863068.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:48.821Z,1478863068.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:48.841Z,1478863068.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:49.226Z,1478863069.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:49.249Z,1478863069.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:49.629Z,1478863069.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:49.747Z,1478863069.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:50.028Z,1478863070.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:50.067Z,1478863070.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:50.434Z,1478863070.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:50.459Z,1478863070.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:50.836Z,1478863070.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:50.864Z,1478863070.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:51.230Z,1478863071.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:51.266Z,1478863071.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:51.660Z,1478863071.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:51.765Z,1478863071.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:52.042Z,1478863072.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:52.098Z,1478863072.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:52.424Z,1478863072.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:52.501Z,1478863072.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:52.844Z,1478863072.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:52.904Z,1478863072.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:53.237Z,1478863073.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:53.271Z,1478863073.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:53.623Z,1478863073.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:53.713Z,1478863073.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:54.023Z,1478863074.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:54.077Z,1478863074.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:54.430Z,1478863074.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:54.490Z,1478863074.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:54.834Z,1478863074.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:54.889Z,1478863074.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:55.223Z,1478863075.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:55.255Z,1478863075.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:55.624Z,1478863075.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:55.670Z,1478863075.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:56.032Z,1478863076.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:56.104Z,1478863076.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:56.435Z,1478863076.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:56.469Z,1478863076.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:56.831Z,1478863076.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:56.895Z,1478863076.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:57.223Z,1478863077.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:57.261Z,1478863077.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:57.623Z,1478863077.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:57.675Z,1478863077.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:58.031Z,1478863078.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:58.056Z,1478863078.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:58.427Z,1478863078.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:58.478Z,1478863078.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:58.832Z,1478863078.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:58.885Z,1478863078.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:59.233Z,1478863079.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:59.258Z,1478863079.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:17:59.626Z,1478863079.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:17:59.661Z,1478863079.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:00.024Z,1478863080.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:00.068Z,1478863080.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:00.430Z,1478863080.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:00.454Z,1478863080.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:00.835Z,1478863080.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:00.850Z,1478863080.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:01.226Z,1478863081.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:01.262Z,1478863081.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:01.637Z,1478863081.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:01.782Z,1478863081.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:02.037Z,1478863082.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:02.075Z,1478863082.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:02.440Z,1478863082.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:02.477Z,1478863082.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:02.834Z,1478863082.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:02.888Z,1478863082.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:03.230Z,1478863083.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:03.257Z,1478863083.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:03.644Z,1478863083.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:03.720Z,1478863083.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:04.024Z,1478863084.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:04.077Z,1478863084.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:04.436Z,1478863084.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:04.469Z,1478863084.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:04.836Z,1478863084.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:04.879Z,1478863084.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:05.231Z,1478863085.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:05.264Z,1478863085.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:05.639Z,1478863085.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:05.756Z,1478863085.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:06.033Z,1478863086.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:06.075Z,1478863086.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:06.429Z,1478863086.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:06.470Z,1478863086.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:06.826Z,1478863086.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:06.835Z,1478863086.835 [PNI_TCM](ERROR): CRC does not match. Expected:0x21824 got:0x48762
2016-11-11T11:18:06.854Z,1478863086.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:07.230Z,1478863087.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:07.256Z,1478863087.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:07.674Z,1478863087.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:07.725Z,1478863087.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:08.034Z,1478863088.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:08.052Z,1478863088.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:08.433Z,1478863088.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:08.448Z,1478863088.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:08.836Z,1478863088.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:08.851Z,1478863088.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:09.229Z,1478863089.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:09.260Z,1478863089.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:09.621Z,1478863089.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:09.650Z,1478863089.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:10.040Z,1478863090.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:10.046Z,1478863090.046 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T11:18:10.073Z,1478863090.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:10.431Z,1478863090.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:10.457Z,1478863090.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:10.822Z,1478863090.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:10.860Z,1478863090.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:11.226Z,1478863091.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:11.255Z,1478863091.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:11.623Z,1478863091.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:11.651Z,1478863091.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:12.027Z,1478863092.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:12.042Z,1478863092.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:12.437Z,1478863092.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:12.457Z,1478863092.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:12.822Z,1478863092.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:12.852Z,1478863092.852 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:12.852Z,1478863092.852 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 110
2016-11-11T11:18:12.853Z,1478863092.852 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:18:12.859Z,1478863092.859 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:12.860Z,1478863092.860 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 110
2016-11-11T11:18:12.860Z,1478863092.860 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:18:12.862Z,1478863092.862 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:12.862Z,1478863092.862 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 110
2016-11-11T11:18:12.862Z,1478863092.862 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:18:12.877Z,1478863092.876 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:18:12.877Z,1478863092.877 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:18:12.877Z,1478863092.877 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:18:13.240Z,1478863093.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:13.301Z,1478863093.301 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:18:13.301Z,1478863093.301 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 110
2016-11-11T11:18:13.301Z,1478863093.301 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:18:13.301Z,1478863093.302 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 110
2016-11-11T11:18:13.302Z,1478863093.302 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:18:13.302Z,1478863093.302 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 110
2016-11-11T11:18:13.640Z,1478863093.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:13.675Z,1478863093.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:18:13.676Z,1478863093.676 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:18:13.676Z,1478863093.676 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:18:13.681Z,1478863093.681 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:18:13.681Z,1478863093.681 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:18:13.681Z,1478863093.681 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:18:13.682Z,1478863093.682 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:18:13.682Z,1478863093.682 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:18:13.683Z,1478863093.683 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:18:14.025Z,1478863094.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:14.104Z,1478863094.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:14.430Z,1478863094.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:14.445Z,1478863094.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:14.823Z,1478863094.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:14.839Z,1478863094.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:15.226Z,1478863095.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:15.246Z,1478863095.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:15.684Z,1478863095.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:15.716Z,1478863095.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:16.026Z,1478863096.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:16.062Z,1478863096.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:16.432Z,1478863096.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:16.505Z,1478863096.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:16.822Z,1478863096.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:16.859Z,1478863096.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:17.248Z,1478863097.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:17.297Z,1478863097.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:17.658Z,1478863097.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:17.690Z,1478863097.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:18.036Z,1478863098.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:18.103Z,1478863098.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:18.426Z,1478863098.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:18.474Z,1478863098.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:18.821Z,1478863098.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:18.861Z,1478863098.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:19.232Z,1478863099.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:19.252Z,1478863099.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:19.662Z,1478863099.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:19.726Z,1478863099.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:20.034Z,1478863100.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:20.049Z,1478863100.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:20.423Z,1478863100.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:20.459Z,1478863100.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:20.831Z,1478863100.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:20.853Z,1478863100.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:21.232Z,1478863101.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:21.253Z,1478863101.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:21.659Z,1478863101.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:21.694Z,1478863101.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:22.021Z,1478863102.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:22.042Z,1478863102.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:22.428Z,1478863102.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:22.457Z,1478863102.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:22.831Z,1478863102.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:22.847Z,1478863102.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:23.236Z,1478863103.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:23.265Z,1478863103.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:23.641Z,1478863103.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:23.664Z,1478863103.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:24.024Z,1478863104.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:24.045Z,1478863104.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:24.421Z,1478863104.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:24.441Z,1478863104.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:24.825Z,1478863104.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:24.845Z,1478863104.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:25.221Z,1478863105.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:25.236Z,1478863105.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:25.624Z,1478863105.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:25.639Z,1478863105.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:26.026Z,1478863106.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:26.041Z,1478863106.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:26.421Z,1478863106.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:26.437Z,1478863106.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:26.826Z,1478863106.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:26.871Z,1478863106.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:27.226Z,1478863107.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:27.249Z,1478863107.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:27.640Z,1478863107.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:27.655Z,1478863107.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:28.032Z,1478863108.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:28.101Z,1478863108.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:28.422Z,1478863108.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:28.449Z,1478863108.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:28.823Z,1478863108.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:28.849Z,1478863108.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:29.232Z,1478863109.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:29.253Z,1478863109.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:29.656Z,1478863109.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:29.709Z,1478863109.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:30.022Z,1478863110.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:30.054Z,1478863110.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:30.422Z,1478863110.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:30.477Z,1478863110.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:30.825Z,1478863110.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:30.885Z,1478863110.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:31.221Z,1478863111.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:31.241Z,1478863111.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:31.662Z,1478863111.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:31.707Z,1478863111.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:32.041Z,1478863112.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:32.112Z,1478863112.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:32.421Z,1478863112.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:32.437Z,1478863112.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:32.825Z,1478863112.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:32.876Z,1478863112.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:33.224Z,1478863113.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:33.273Z,1478863113.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:33.648Z,1478863113.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:33.702Z,1478863113.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:34.028Z,1478863114.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:34.046Z,1478863114.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:34.432Z,1478863114.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:34.447Z,1478863114.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:34.830Z,1478863114.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:34.845Z,1478863114.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:35.225Z,1478863115.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:35.249Z,1478863115.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:35.644Z,1478863115.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:35.684Z,1478863115.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:36.046Z,1478863116.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:36.062Z,1478863116.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:36.432Z,1478863116.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:36.465Z,1478863116.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:36.825Z,1478863116.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:36.857Z,1478863116.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:37.222Z,1478863117.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:37.261Z,1478863117.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:37.626Z,1478863117.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:37.686Z,1478863117.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:38.021Z,1478863118.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:38.041Z,1478863118.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:38.426Z,1478863118.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:38.473Z,1478863118.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:38.826Z,1478863118.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:38.849Z,1478863118.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:39.224Z,1478863119.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:39.257Z,1478863119.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:42.749Z,1478863122.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:42.787Z,1478863122.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:42.881Z,1478863122.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:42.913Z,1478863122.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:43.249Z,1478863123.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:43.269Z,1478863123.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:43.654Z,1478863123.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:43.698Z,1478863123.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:44.045Z,1478863124.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:44.065Z,1478863124.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:44.441Z,1478863124.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:44.464Z,1478863124.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:44.851Z,1478863124.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:44.867Z,1478863124.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:45.249Z,1478863125.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:45.297Z,1478863125.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:45.652Z,1478863125.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:45.676Z,1478863125.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:46.041Z,1478863126.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:46.071Z,1478863126.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:46.440Z,1478863126.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:46.495Z,1478863126.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:46.849Z,1478863126.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:46.869Z,1478863126.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:47.237Z,1478863127.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:47.286Z,1478863127.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:47.668Z,1478863127.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:47.684Z,1478863127.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:48.041Z,1478863128.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:48.097Z,1478863128.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:48.438Z,1478863128.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:48.452Z,1478863128.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:48.856Z,1478863128.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:48.893Z,1478863128.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:49.252Z,1478863129.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:49.284Z,1478863129.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:49.655Z,1478863129.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:49.686Z,1478863129.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:50.041Z,1478863130.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:50.063Z,1478863130.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:50.452Z,1478863130.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:50.467Z,1478863130.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:50.855Z,1478863130.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:50.877Z,1478863130.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:51.241Z,1478863131.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:51.263Z,1478863131.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:51.666Z,1478863131.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:51.734Z,1478863131.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:52.044Z,1478863132.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:52.059Z,1478863132.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:52.441Z,1478863132.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:52.461Z,1478863132.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:52.841Z,1478863132.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:52.861Z,1478863132.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:53.244Z,1478863133.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:53.265Z,1478863133.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:53.643Z,1478863133.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:53.659Z,1478863133.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:54.063Z,1478863134.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:54.112Z,1478863134.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:54.447Z,1478863134.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:54.462Z,1478863134.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:54.860Z,1478863134.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:54.876Z,1478863134.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:55.255Z,1478863135.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:55.270Z,1478863135.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:55.650Z,1478863135.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:55.669Z,1478863135.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:56.068Z,1478863136.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:56.117Z,1478863136.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:56.441Z,1478863136.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:56.467Z,1478863136.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:56.845Z,1478863136.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:56.873Z,1478863136.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:57.237Z,1478863137.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:57.268Z,1478863137.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:57.638Z,1478863137.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:57.669Z,1478863137.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:58.047Z,1478863138.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:58.084Z,1478863138.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:58.438Z,1478863138.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:58.454Z,1478863138.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:58.846Z,1478863138.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:58.906Z,1478863138.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:59.252Z,1478863139.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:59.275Z,1478863139.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:18:59.677Z,1478863139.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:18:59.733Z,1478863139.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:00.045Z,1478863140.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:00.085Z,1478863140.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:00.444Z,1478863140.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:00.494Z,1478863140.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:00.844Z,1478863140.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:00.860Z,1478863140.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:01.241Z,1478863141.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:01.289Z,1478863141.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:01.638Z,1478863141.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:01.658Z,1478863141.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:02.037Z,1478863142.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:02.083Z,1478863142.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:02.437Z,1478863142.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:02.474Z,1478863142.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:02.837Z,1478863142.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:02.857Z,1478863142.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:03.241Z,1478863143.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:03.256Z,1478863143.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:03.653Z,1478863143.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:03.693Z,1478863143.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:04.045Z,1478863144.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:04.065Z,1478863144.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:04.444Z,1478863144.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:04.460Z,1478863144.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:04.840Z,1478863144.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:04.868Z,1478863144.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:05.245Z,1478863145.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:05.265Z,1478863145.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:05.694Z,1478863145.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:05.730Z,1478863145.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:06.041Z,1478863146.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:06.081Z,1478863146.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:06.437Z,1478863146.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:06.457Z,1478863146.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:06.843Z,1478863146.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:06.859Z,1478863146.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:07.245Z,1478863147.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:07.265Z,1478863147.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:07.645Z,1478863147.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:07.660Z,1478863147.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:08.059Z,1478863148.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:08.101Z,1478863148.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:08.458Z,1478863148.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:08.474Z,1478863148.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:08.838Z,1478863148.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:08.869Z,1478863148.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:09.245Z,1478863149.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:09.279Z,1478863149.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:09.641Z,1478863149.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:09.678Z,1478863149.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:10.057Z,1478863150.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:10.081Z,1478863150.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:10.453Z,1478863150.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:10.473Z,1478863150.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:10.853Z,1478863150.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:10.873Z,1478863150.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:11.237Z,1478863151.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:11.269Z,1478863151.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:11.637Z,1478863151.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:11.663Z,1478863151.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:12.056Z,1478863152.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:12.084Z,1478863152.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:12.461Z,1478863152.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:12.476Z,1478863152.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:12.837Z,1478863152.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:12.893Z,1478863152.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:13.237Z,1478863153.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:13.273Z,1478863153.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:13.653Z,1478863153.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:13.705Z,1478863153.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:14.037Z,1478863154.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:14.063Z,1478863154.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:14.445Z,1478863154.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:14.467Z,1478863154.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:14.837Z,1478863154.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:14.886Z,1478863154.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:15.237Z,1478863155.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:15.262Z,1478863155.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:15.654Z,1478863155.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:15.709Z,1478863155.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:16.042Z,1478863156.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:16.082Z,1478863156.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:16.452Z,1478863156.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:16.484Z,1478863156.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:16.852Z,1478863156.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:16.887Z,1478863156.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:17.244Z,1478863157.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:17.259Z,1478863157.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:17.644Z,1478863157.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:17.660Z,1478863157.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:18.048Z,1478863158.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:18.064Z,1478863158.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:18.445Z,1478863158.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:18.465Z,1478863158.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:18.841Z,1478863158.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:18.863Z,1478863158.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:19.249Z,1478863159.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:19.264Z,1478863159.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:19.659Z,1478863159.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:19.713Z,1478863159.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:20.037Z,1478863160.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:20.073Z,1478863160.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:20.437Z,1478863160.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:20.473Z,1478863160.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:20.861Z,1478863160.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:20.881Z,1478863160.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:21.248Z,1478863161.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:21.283Z,1478863161.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:21.641Z,1478863161.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:21.677Z,1478863161.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:22.040Z,1478863162.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:22.071Z,1478863162.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:22.441Z,1478863162.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:22.461Z,1478863162.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:22.845Z,1478863162.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:22.865Z,1478863162.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:23.245Z,1478863163.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:23.260Z,1478863163.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:23.640Z,1478863163.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:23.673Z,1478863163.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:24.053Z,1478863164.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:24.096Z,1478863164.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:24.445Z,1478863164.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:24.470Z,1478863164.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:24.840Z,1478863164.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:24.872Z,1478863164.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:25.249Z,1478863165.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:25.269Z,1478863165.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:25.637Z,1478863165.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:25.686Z,1478863165.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:26.037Z,1478863166.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:26.073Z,1478863166.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:26.437Z,1478863166.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:26.473Z,1478863166.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:26.837Z,1478863166.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:26.893Z,1478863166.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:27.237Z,1478863167.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:27.257Z,1478863167.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:27.649Z,1478863167.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:27.686Z,1478863167.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:28.045Z,1478863168.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:28.065Z,1478863168.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:28.444Z,1478863168.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:28.505Z,1478863168.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:28.848Z,1478863168.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:28.869Z,1478863168.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:29.237Z,1478863169.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:29.286Z,1478863169.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:29.660Z,1478863169.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:29.681Z,1478863169.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:30.063Z,1478863170.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:30.115Z,1478863170.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:30.437Z,1478863170.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:30.478Z,1478863170.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:30.837Z,1478863170.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:30.869Z,1478863170.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:31.245Z,1478863171.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:31.271Z,1478863171.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:31.637Z,1478863171.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:31.671Z,1478863171.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:32.037Z,1478863172.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:32.069Z,1478863172.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:32.441Z,1478863172.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:32.473Z,1478863172.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:32.837Z,1478863172.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:32.873Z,1478863172.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:33.237Z,1478863173.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:33.269Z,1478863173.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:33.663Z,1478863173.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:33.703Z,1478863173.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:34.052Z,1478863174.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:34.078Z,1478863174.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:34.437Z,1478863174.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:34.477Z,1478863174.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:34.837Z,1478863174.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:34.857Z,1478863174.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:35.241Z,1478863175.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:35.261Z,1478863175.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:35.645Z,1478863175.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:35.686Z,1478863175.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:36.049Z,1478863176.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:36.084Z,1478863176.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:36.443Z,1478863176.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:36.458Z,1478863176.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:36.843Z,1478863176.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:36.867Z,1478863176.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:37.249Z,1478863177.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:37.264Z,1478863177.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:37.645Z,1478863177.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:37.671Z,1478863177.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:38.058Z,1478863178.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:38.085Z,1478863178.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:38.459Z,1478863178.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:38.475Z,1478863178.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:38.837Z,1478863178.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:38.865Z,1478863178.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:39.237Z,1478863179.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:39.276Z,1478863179.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:42.804Z,1478863182.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:42.882Z,1478863182.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:42.974Z,1478863182.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:43.017Z,1478863183.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:43.357Z,1478863183.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:43.383Z,1478863183.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:43.762Z,1478863183.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:43.817Z,1478863183.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:44.162Z,1478863184.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:44.190Z,1478863184.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:44.557Z,1478863184.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:44.613Z,1478863184.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:44.978Z,1478863184.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:45.038Z,1478863185.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:45.356Z,1478863185.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:45.384Z,1478863185.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:45.769Z,1478863185.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:45.789Z,1478863185.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:46.165Z,1478863186.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:46.191Z,1478863186.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:46.553Z,1478863186.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:46.585Z,1478863186.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:46.958Z,1478863186.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:46.990Z,1478863186.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:47.353Z,1478863187.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:47.390Z,1478863187.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:47.766Z,1478863187.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:47.782Z,1478863187.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:48.159Z,1478863188.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:48.179Z,1478863188.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:48.562Z,1478863188.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:48.585Z,1478863188.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:48.964Z,1478863188.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:48.986Z,1478863188.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:49.353Z,1478863189.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:49.385Z,1478863189.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:49.754Z,1478863189.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:49.778Z,1478863189.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:50.158Z,1478863190.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:50.183Z,1478863190.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:50.553Z,1478863190.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:50.574Z,1478863190.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:50.958Z,1478863190.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:50.978Z,1478863190.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:51.360Z,1478863191.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:51.375Z,1478863191.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:51.759Z,1478863191.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:51.775Z,1478863191.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:52.160Z,1478863192.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:52.176Z,1478863192.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:52.566Z,1478863192.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:52.581Z,1478863192.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:52.965Z,1478863192.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:52.980Z,1478863192.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:53.354Z,1478863193.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:53.389Z,1478863193.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:53.761Z,1478863193.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:53.787Z,1478863193.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:54.161Z,1478863194.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:54.193Z,1478863194.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:54.553Z,1478863194.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:54.573Z,1478863194.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:54.961Z,1478863194.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:54.997Z,1478863194.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:55.360Z,1478863195.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:55.375Z,1478863195.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:55.769Z,1478863195.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:55.826Z,1478863195.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:56.161Z,1478863196.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:56.183Z,1478863196.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:56.538Z,1478863196.538 [NAL9602](INFO): SBD MO Status=2, MOMSN=344, MT Status=2, MTMSN=0
2016-11-11T11:19:56.538Z,1478863196.538 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T11:19:56.554Z,1478863196.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:56.597Z,1478863196.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:56.973Z,1478863196.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:56.994Z,1478863196.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:57.353Z,1478863197.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:57.416Z,1478863197.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:57.760Z,1478863197.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:57.816Z,1478863197.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:58.161Z,1478863198.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:58.218Z,1478863198.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:58.556Z,1478863198.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:58.589Z,1478863198.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:58.953Z,1478863198.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:59.030Z,1478863199.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:59.354Z,1478863199.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:59.407Z,1478863199.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:19:59.753Z,1478863199.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:19:59.773Z,1478863199.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:00.157Z,1478863200.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:00.172Z,1478863200.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:00.561Z,1478863200.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:00.581Z,1478863200.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:00.970Z,1478863200.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:00.993Z,1478863200.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:01.369Z,1478863201.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:01.389Z,1478863201.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:01.785Z,1478863201.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:01.811Z,1478863201.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:02.164Z,1478863202.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:02.198Z,1478863202.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:02.553Z,1478863202.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:02.596Z,1478863202.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:02.959Z,1478863202.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:02.996Z,1478863202.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:03.353Z,1478863203.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:03.373Z,1478863203.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:03.757Z,1478863203.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:03.777Z,1478863203.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:04.153Z,1478863204.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:04.188Z,1478863204.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:04.553Z,1478863204.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:04.585Z,1478863204.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:04.957Z,1478863204.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:04.989Z,1478863204.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:05.354Z,1478863205.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:05.381Z,1478863205.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:05.768Z,1478863205.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:05.809Z,1478863205.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:06.184Z,1478863206.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:06.207Z,1478863206.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:06.556Z,1478863206.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:06.581Z,1478863206.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:06.964Z,1478863206.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:06.980Z,1478863206.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:07.367Z,1478863207.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:07.382Z,1478863207.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:07.753Z,1478863207.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:07.773Z,1478863207.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:08.168Z,1478863208.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:08.204Z,1478863208.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:08.572Z,1478863208.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:08.607Z,1478863208.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:08.972Z,1478863208.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:09.007Z,1478863209.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:09.368Z,1478863209.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:09.384Z,1478863209.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:09.753Z,1478863209.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:09.826Z,1478863209.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:10.153Z,1478863210.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:10.190Z,1478863210.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:10.553Z,1478863210.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:10.585Z,1478863210.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:10.962Z,1478863210.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:11.017Z,1478863211.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:11.358Z,1478863211.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:11.373Z,1478863211.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:11.753Z,1478863211.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:11.785Z,1478863211.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:12.153Z,1478863212.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:12.223Z,1478863212.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:12.554Z,1478863212.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:12.589Z,1478863212.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:12.974Z,1478863212.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:13.033Z,1478863213.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:13.372Z,1478863213.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:13.481Z,1478863213.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:13.758Z,1478863213.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:13.785Z,1478863213.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:14.153Z,1478863214.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:14.173Z,1478863214.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:14.559Z,1478863214.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:14.574Z,1478863214.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:14.968Z,1478863214.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:14.984Z,1478863214.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:15.352Z,1478863215.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:15.378Z,1478863215.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:15.768Z,1478863215.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:15.789Z,1478863215.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:16.158Z,1478863216.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:16.184Z,1478863216.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:16.553Z,1478863216.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:16.589Z,1478863216.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:16.976Z,1478863216.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:16.997Z,1478863216.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:17.368Z,1478863217.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:17.405Z,1478863217.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:17.768Z,1478863217.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:17.812Z,1478863217.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:18.170Z,1478863218.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:18.193Z,1478863218.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:18.558Z,1478863218.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:18.590Z,1478863218.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:18.954Z,1478863218.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:18.978Z,1478863218.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:19.357Z,1478863219.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:19.393Z,1478863219.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:19.758Z,1478863219.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:19.786Z,1478863219.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:20.161Z,1478863220.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:20.215Z,1478863220.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:20.553Z,1478863220.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:20.573Z,1478863220.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:20.953Z,1478863220.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:20.985Z,1478863220.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:21.353Z,1478863221.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:21.385Z,1478863221.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:21.753Z,1478863221.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:21.802Z,1478863221.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:22.168Z,1478863222.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:22.209Z,1478863222.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:22.572Z,1478863222.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:22.596Z,1478863222.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:22.967Z,1478863222.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:22.991Z,1478863222.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:23.368Z,1478863223.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:23.384Z,1478863223.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:23.756Z,1478863223.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:23.789Z,1478863223.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:24.162Z,1478863224.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:24.194Z,1478863224.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:24.566Z,1478863224.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:24.593Z,1478863224.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:24.954Z,1478863224.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:24.986Z,1478863224.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:25.353Z,1478863225.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:25.437Z,1478863225.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:25.753Z,1478863225.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:25.773Z,1478863225.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:26.154Z,1478863226.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:26.169Z,1478863226.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:26.564Z,1478863226.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:26.614Z,1478863226.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:26.966Z,1478863226.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:26.981Z,1478863226.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:27.376Z,1478863227.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:27.465Z,1478863227.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:27.766Z,1478863227.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:27.831Z,1478863227.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:28.175Z,1478863228.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:28.203Z,1478863228.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:28.568Z,1478863228.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:28.591Z,1478863228.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:28.957Z,1478863228.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:28.994Z,1478863228.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:29.353Z,1478863229.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:29.395Z,1478863229.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:29.753Z,1478863229.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:29.797Z,1478863229.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:30.153Z,1478863230.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:30.173Z,1478863230.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:30.553Z,1478863230.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:30.568Z,1478863230.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:30.958Z,1478863230.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:30.974Z,1478863230.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:31.353Z,1478863231.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:31.385Z,1478863231.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:31.753Z,1478863231.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:31.790Z,1478863231.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:32.153Z,1478863232.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:32.173Z,1478863232.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:32.567Z,1478863232.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:32.596Z,1478863232.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:32.972Z,1478863232.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:33.027Z,1478863233.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:33.368Z,1478863233.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:33.383Z,1478863233.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:33.764Z,1478863233.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:33.779Z,1478863233.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:34.153Z,1478863234.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:34.194Z,1478863234.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:34.553Z,1478863234.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:34.593Z,1478863234.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:34.954Z,1478863234.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:34.969Z,1478863234.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:35.360Z,1478863235.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:35.437Z,1478863235.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:35.767Z,1478863235.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:35.786Z,1478863235.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:36.157Z,1478863236.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:36.196Z,1478863236.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:36.558Z,1478863236.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:36.584Z,1478863236.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:36.953Z,1478863236.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:36.990Z,1478863236.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:37.353Z,1478863237.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:37.422Z,1478863237.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:37.769Z,1478863237.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:37.794Z,1478863237.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:38.169Z,1478863238.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:38.216Z,1478863238.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:38.568Z,1478863238.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:38.622Z,1478863238.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:38.981Z,1478863238.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:38.998Z,1478863238.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:39.358Z,1478863239.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:39.450Z,1478863239.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:42.742Z,1478863242.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:42.813Z,1478863242.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:42.916Z,1478863242.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:42.942Z,1478863242.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:43.296Z,1478863243.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:43.311Z,1478863243.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:43.689Z,1478863243.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:43.709Z,1478863243.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:44.093Z,1478863244.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:44.113Z,1478863244.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:44.493Z,1478863244.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:44.552Z,1478863244.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:44.881Z,1478863244.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:44.918Z,1478863244.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:45.285Z,1478863245.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:45.356Z,1478863245.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:45.682Z,1478863245.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:45.725Z,1478863245.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:46.081Z,1478863246.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:46.118Z,1478863246.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:46.482Z,1478863246.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:46.513Z,1478863246.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:46.904Z,1478863246.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:46.920Z,1478863246.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:47.304Z,1478863247.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:47.324Z,1478863247.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:47.681Z,1478863247.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:47.717Z,1478863247.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:48.089Z,1478863248.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:48.115Z,1478863248.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:48.481Z,1478863248.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:48.525Z,1478863248.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:48.881Z,1478863248.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:48.922Z,1478863248.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:49.281Z,1478863249.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:49.301Z,1478863249.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:49.681Z,1478863249.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:49.716Z,1478863249.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:50.093Z,1478863250.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:50.113Z,1478863250.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:50.493Z,1478863250.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:50.515Z,1478863250.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:50.881Z,1478863250.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:50.914Z,1478863250.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:51.285Z,1478863251.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:51.313Z,1478863251.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:51.697Z,1478863251.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:51.717Z,1478863251.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:52.081Z,1478863252.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:52.113Z,1478863252.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:52.481Z,1478863252.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:52.514Z,1478863252.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:52.885Z,1478863252.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:52.910Z,1478863252.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:53.281Z,1478863253.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:53.318Z,1478863253.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:53.690Z,1478863253.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:53.725Z,1478863253.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:54.081Z,1478863254.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:54.117Z,1478863254.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:54.481Z,1478863254.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:54.517Z,1478863254.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:54.886Z,1478863254.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:54.922Z,1478863254.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:55.285Z,1478863255.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:55.317Z,1478863255.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:55.705Z,1478863255.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:55.725Z,1478863255.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:56.104Z,1478863256.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:56.120Z,1478863256.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:56.480Z,1478863256.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:56.533Z,1478863256.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:56.616Z,1478863256.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:56.882Z,1478863256.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:56.927Z,1478863256.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:57.282Z,1478863257.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:57.298Z,1478863257.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:57.412Z,1478863257.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:57.690Z,1478863257.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:57.749Z,1478863257.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:57.904Z,1478863257.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:58.082Z,1478863258.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:58.105Z,1478863258.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:58.488Z,1478863258.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:58.539Z,1478863258.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:58.700Z,1478863258.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:58.890Z,1478863258.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:58.909Z,1478863258.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:59.288Z,1478863259.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:59.338Z,1478863259.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:20:59.496Z,1478863259.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:59.689Z,1478863259.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:20:59.748Z,1478863259.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:00.104Z,1478863260.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:00.120Z,1478863260.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:00.252Z,1478863260.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:00.503Z,1478863260.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:00.525Z,1478863260.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:00.884Z,1478863260.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:00.907Z,1478863260.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:01.048Z,1478863261.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:01.289Z,1478863261.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:01.310Z,1478863261.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:01.694Z,1478863261.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:01.709Z,1478863261.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:02.097Z,1478863262.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:02.117Z,1478863262.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:02.485Z,1478863262.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:02.517Z,1478863262.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:02.881Z,1478863262.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:02.917Z,1478863262.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:03.281Z,1478863263.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:03.317Z,1478863263.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:03.696Z,1478863263.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:03.711Z,1478863263.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:04.089Z,1478863264.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:04.109Z,1478863264.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:04.504Z,1478863264.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:04.519Z,1478863264.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:04.906Z,1478863264.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:04.933Z,1478863264.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:05.282Z,1478863265.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:05.393Z,1478863265.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:05.684Z,1478863265.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:05.705Z,1478863265.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:06.084Z,1478863266.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:06.113Z,1478863266.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:06.489Z,1478863266.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:06.505Z,1478863266.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:06.884Z,1478863266.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:06.912Z,1478863266.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:07.285Z,1478863267.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:07.311Z,1478863267.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:07.681Z,1478863267.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:07.725Z,1478863267.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:08.089Z,1478863268.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:08.122Z,1478863268.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:08.510Z,1478863268.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:08.530Z,1478863268.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:08.896Z,1478863268.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:08.937Z,1478863268.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:09.304Z,1478863269.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:09.370Z,1478863269.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:09.704Z,1478863269.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:09.734Z,1478863269.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:10.081Z,1478863270.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:10.117Z,1478863270.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:10.481Z,1478863270.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:10.517Z,1478863270.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:10.592Z,1478863270.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:10.885Z,1478863270.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:10.913Z,1478863270.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:11.282Z,1478863271.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:11.301Z,1478863271.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:11.388Z,1478863271.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:11.681Z,1478863271.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:11.701Z,1478863271.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:11.876Z,1478863271.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:12.085Z,1478863272.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:12.134Z,1478863272.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:12.481Z,1478863272.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:12.509Z,1478863272.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:12.672Z,1478863272.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:12.884Z,1478863272.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:12.953Z,1478863272.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:13.293Z,1478863273.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:13.313Z,1478863273.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:13.468Z,1478863273.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:13.704Z,1478863273.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:13.757Z,1478863273.757 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:13.757Z,1478863273.757 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 111
2016-11-11T11:21:13.757Z,1478863273.757 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:21:13.764Z,1478863273.764 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:13.764Z,1478863273.764 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 111
2016-11-11T11:21:13.764Z,1478863273.764 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:21:13.766Z,1478863273.766 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:13.766Z,1478863273.766 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 111
2016-11-11T11:21:13.766Z,1478863273.766 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:21:13.816Z,1478863273.816 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:21:13.816Z,1478863273.816 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:21:13.817Z,1478863273.816 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:21:14.092Z,1478863274.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:14.150Z,1478863274.150 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:21:14.150Z,1478863274.150 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 111
2016-11-11T11:21:14.151Z,1478863274.151 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:21:14.151Z,1478863274.151 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 111
2016-11-11T11:21:14.152Z,1478863274.152 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:21:14.152Z,1478863274.152 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 111
2016-11-11T11:21:14.489Z,1478863274.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:14.508Z,1478863274.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:21:14.508Z,1478863274.508 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:21:14.509Z,1478863274.509 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:21:14.530Z,1478863274.530 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:21:14.535Z,1478863274.535 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:21:14.535Z,1478863274.535 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:21:14.536Z,1478863274.536 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:21:14.536Z,1478863274.536 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:21:14.537Z,1478863274.537 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:21:14.888Z,1478863274.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:14.909Z,1478863274.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:15.284Z,1478863275.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:15.317Z,1478863275.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:15.684Z,1478863275.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:15.712Z,1478863275.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:16.081Z,1478863276.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:16.096Z,1478863276.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:16.496Z,1478863276.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:16.524Z,1478863276.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:16.896Z,1478863276.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:16.911Z,1478863276.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:17.296Z,1478863277.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:17.376Z,1478863277.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:17.696Z,1478863277.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:17.729Z,1478863277.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:18.081Z,1478863278.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:18.113Z,1478863278.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:18.481Z,1478863278.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:18.513Z,1478863278.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:18.881Z,1478863278.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:18.914Z,1478863278.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:19.281Z,1478863279.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:19.372Z,1478863279.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:19.681Z,1478863279.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:19.701Z,1478863279.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:20.082Z,1478863280.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:20.106Z,1478863280.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:20.493Z,1478863280.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:20.516Z,1478863280.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:20.889Z,1478863280.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:20.908Z,1478863280.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:21.284Z,1478863281.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:21.352Z,1478863281.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:21.705Z,1478863281.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:21.730Z,1478863281.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:22.110Z,1478863282.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:22.128Z,1478863282.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:22.496Z,1478863282.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:22.529Z,1478863282.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:22.892Z,1478863282.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:22.924Z,1478863282.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:23.282Z,1478863283.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:23.348Z,1478863283.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:23.684Z,1478863283.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:23.714Z,1478863283.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:24.098Z,1478863284.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:24.116Z,1478863284.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:24.494Z,1478863284.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:24.526Z,1478863284.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:24.890Z,1478863284.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:24.911Z,1478863284.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:25.289Z,1478863285.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:25.319Z,1478863285.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:25.681Z,1478863285.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:25.721Z,1478863285.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:26.081Z,1478863286.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:26.169Z,1478863286.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:26.485Z,1478863286.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:26.523Z,1478863286.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:26.636Z,1478863286.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:26.896Z,1478863286.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:26.958Z,1478863286.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:27.293Z,1478863287.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:27.331Z,1478863287.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:27.432Z,1478863287.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:27.696Z,1478863287.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:27.749Z,1478863287.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:28.096Z,1478863288.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:28.149Z,1478863288.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:28.484Z,1478863288.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:28.512Z,1478863288.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:28.884Z,1478863288.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:28.928Z,1478863288.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:29.289Z,1478863289.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:29.305Z,1478863289.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:29.684Z,1478863289.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:29.710Z,1478863289.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:30.089Z,1478863290.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:30.118Z,1478863290.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:30.481Z,1478863290.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:30.521Z,1478863290.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:30.881Z,1478863290.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:30.919Z,1478863290.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:31.281Z,1478863291.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:31.364Z,1478863291.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:31.685Z,1478863291.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:31.707Z,1478863291.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:32.098Z,1478863292.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:32.117Z,1478863292.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:32.494Z,1478863292.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:32.534Z,1478863292.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:32.900Z,1478863292.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:32.943Z,1478863292.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:33.308Z,1478863293.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:33.372Z,1478863293.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:33.682Z,1478863293.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:33.716Z,1478863293.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:34.081Z,1478863294.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:34.116Z,1478863294.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:34.481Z,1478863294.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:34.516Z,1478863294.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:34.885Z,1478863294.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:34.921Z,1478863294.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:35.290Z,1478863295.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:35.362Z,1478863295.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:35.685Z,1478863295.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:35.717Z,1478863295.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:36.084Z,1478863296.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:36.117Z,1478863296.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:36.491Z,1478863296.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:36.520Z,1478863296.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:36.885Z,1478863296.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:36.912Z,1478863296.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:37.333Z,1478863297.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:37.371Z,1478863297.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:37.704Z,1478863297.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:37.726Z,1478863297.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:38.104Z,1478863298.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:38.128Z,1478863298.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:38.494Z,1478863298.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:38.530Z,1478863298.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:38.604Z,1478863298.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:38.881Z,1478863298.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:38.925Z,1478863298.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:38.947Z,1478863298.947 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T11:16:38.6Z
2016-11-11T11:21:38.947Z,1478863298.947 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T11:21:38.947Z,1478863298.947 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T11:21:39.281Z,1478863299.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:39.302Z,1478863299.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:39.415Z,1478863299.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:39.844Z,1478863299.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:40.193Z,1478863300.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:40.325Z,1478863300.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:40.640Z,1478863300.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:41.436Z,1478863301.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:43.506Z,1478863303.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:43.529Z,1478863303.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:43.587Z,1478863303.587 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0152.lzma
2016-11-11T11:21:43.638Z,1478863303.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:43.667Z,1478863303.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:44.029Z,1478863304.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:44.045Z,1478863304.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:44.381Z,1478863304.381 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0152.lzma.bak
2016-11-11T11:21:44.381Z,1478863304.381 [DataOverHttps](INFO): SBD MOMSN=4555356
2016-11-11T11:21:44.416Z,1478863304.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:44.484Z,1478863304.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:45.745Z,1478863305.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:45.762Z,1478863305.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:45.860Z,1478863305.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:45.917Z,1478863305.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:49.286Z,1478863309.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:49.366Z,1478863309.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:49.461Z,1478863309.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:49.491Z,1478863309.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:49.859Z,1478863309.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:49.874Z,1478863309.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:50.260Z,1478863310.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:50.295Z,1478863310.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:50.648Z,1478863310.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:50.669Z,1478863310.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:51.055Z,1478863311.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:51.070Z,1478863311.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:54.566Z,1478863314.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:54.582Z,1478863314.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:54.636Z,1478863314.636 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0153.lzma
2016-11-11T11:21:54.701Z,1478863314.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:54.729Z,1478863314.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:55.084Z,1478863315.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:55.099Z,1478863315.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:55.437Z,1478863315.437 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0153.lzma.bak
2016-11-11T11:21:55.437Z,1478863315.437 [DataOverHttps](INFO): SBD MOMSN=4555358
2016-11-11T11:21:55.486Z,1478863315.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:55.518Z,1478863315.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:56.742Z,1478863316.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:56.765Z,1478863316.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:21:56.795Z,1478863316.795 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T11:21:56.795Z,1478863316.795 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T11:21:56.795Z,1478863316.795 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T11:21:56.862Z,1478863316.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:21:56.886Z,1478863316.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:00.441Z,1478863320.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:00.459Z,1478863320.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:00.575Z,1478863320.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:00.609Z,1478863320.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:00.956Z,1478863320.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:01.008Z,1478863321.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:01.364Z,1478863321.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:01.417Z,1478863321.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:01.745Z,1478863321.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:01.781Z,1478863321.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:02.145Z,1478863322.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:02.197Z,1478863322.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:02.545Z,1478863322.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:02.578Z,1478863322.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:02.954Z,1478863322.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:03.017Z,1478863323.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:03.353Z,1478863323.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:03.419Z,1478863323.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:03.745Z,1478863323.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:03.778Z,1478863323.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:04.149Z,1478863324.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:04.175Z,1478863324.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:04.545Z,1478863324.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:04.577Z,1478863324.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:04.945Z,1478863324.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:04.978Z,1478863324.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:05.378Z,1478863325.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:05.403Z,1478863325.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:05.768Z,1478863325.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:05.790Z,1478863325.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:06.160Z,1478863326.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:06.186Z,1478863326.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:06.561Z,1478863326.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:06.598Z,1478863326.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:06.949Z,1478863326.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:06.973Z,1478863326.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:07.364Z,1478863327.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:07.394Z,1478863327.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:07.757Z,1478863327.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:07.792Z,1478863327.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:08.153Z,1478863328.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:08.189Z,1478863328.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:08.552Z,1478863328.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:08.567Z,1478863328.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:08.949Z,1478863328.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:08.973Z,1478863328.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:09.352Z,1478863329.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:09.367Z,1478863329.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:09.751Z,1478863329.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:09.791Z,1478863329.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:10.148Z,1478863330.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:10.176Z,1478863330.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:10.564Z,1478863330.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:10.584Z,1478863330.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:10.967Z,1478863330.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:10.986Z,1478863330.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:11.369Z,1478863331.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:11.397Z,1478863331.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:11.762Z,1478863331.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:11.815Z,1478863331.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:12.153Z,1478863332.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:12.168Z,1478863332.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:12.557Z,1478863332.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:12.577Z,1478863332.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:12.957Z,1478863332.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:12.973Z,1478863332.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:13.367Z,1478863333.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:13.427Z,1478863333.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:13.757Z,1478863333.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:13.777Z,1478863333.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:14.133Z,1478863334.133 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T11:22:14.158Z,1478863334.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:14.181Z,1478863334.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:14.545Z,1478863334.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:14.581Z,1478863334.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:14.961Z,1478863334.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:14.977Z,1478863334.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:15.360Z,1478863335.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:15.433Z,1478863335.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:15.745Z,1478863335.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:15.781Z,1478863335.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:16.145Z,1478863336.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:16.224Z,1478863336.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:16.545Z,1478863336.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:16.581Z,1478863336.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:16.945Z,1478863336.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:17.018Z,1478863337.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:17.345Z,1478863337.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:17.378Z,1478863337.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:17.753Z,1478863337.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:17.819Z,1478863337.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:18.145Z,1478863338.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:18.181Z,1478863338.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:18.545Z,1478863338.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:18.581Z,1478863338.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:18.945Z,1478863338.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:18.981Z,1478863338.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:19.353Z,1478863339.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:19.379Z,1478863339.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:19.733Z,1478863339.733 [NAL9602](INFO): Powering down
2016-11-11T11:22:19.753Z,1478863339.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:19.795Z,1478863339.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:20.145Z,1478863340.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:20.188Z,1478863340.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:20.545Z,1478863340.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:20.560Z,1478863340.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:20.945Z,1478863340.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:20.965Z,1478863340.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:21.371Z,1478863341.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:21.413Z,1478863341.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:21.753Z,1478863341.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:21.768Z,1478863341.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:22.151Z,1478863342.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:22.171Z,1478863342.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:22.553Z,1478863342.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:22.574Z,1478863342.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:22.946Z,1478863342.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:22.981Z,1478863342.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:23.345Z,1478863343.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:23.373Z,1478863343.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:23.747Z,1478863343.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:23.787Z,1478863343.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:24.146Z,1478863344.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:24.161Z,1478863344.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:24.552Z,1478863344.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:24.567Z,1478863344.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:24.993Z,1478863344.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:25.020Z,1478863345.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:25.348Z,1478863345.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:25.373Z,1478863345.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:25.754Z,1478863345.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:25.780Z,1478863345.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:26.157Z,1478863346.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:26.192Z,1478863346.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:26.552Z,1478863346.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:26.569Z,1478863346.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:26.953Z,1478863346.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:26.974Z,1478863346.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:27.357Z,1478863347.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:27.372Z,1478863347.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:27.757Z,1478863347.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:27.772Z,1478863347.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:28.152Z,1478863348.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:28.168Z,1478863348.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:28.553Z,1478863348.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:28.573Z,1478863348.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:28.945Z,1478863348.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:28.985Z,1478863348.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:29.357Z,1478863349.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:29.399Z,1478863349.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:29.745Z,1478863349.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:29.811Z,1478863349.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:30.145Z,1478863350.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:30.212Z,1478863350.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:30.545Z,1478863350.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:30.561Z,1478863350.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:30.945Z,1478863350.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:30.997Z,1478863350.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:31.357Z,1478863351.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:31.372Z,1478863351.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:31.751Z,1478863351.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:31.807Z,1478863351.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:32.151Z,1478863352.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:32.211Z,1478863352.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:32.551Z,1478863352.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:32.566Z,1478863352.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:32.953Z,1478863352.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:32.973Z,1478863352.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:33.360Z,1478863353.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:33.376Z,1478863353.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:33.768Z,1478863353.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:33.822Z,1478863353.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:34.147Z,1478863354.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:34.179Z,1478863354.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:34.547Z,1478863354.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:34.595Z,1478863354.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:34.947Z,1478863354.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:34.997Z,1478863354.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:35.355Z,1478863355.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:35.407Z,1478863355.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:35.755Z,1478863355.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:35.801Z,1478863355.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:36.147Z,1478863356.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:36.181Z,1478863356.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:36.550Z,1478863356.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:36.590Z,1478863356.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:36.954Z,1478863356.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:36.979Z,1478863356.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:37.355Z,1478863357.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:37.379Z,1478863357.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:37.747Z,1478863357.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:37.790Z,1478863357.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:38.150Z,1478863358.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:38.197Z,1478863358.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:38.547Z,1478863358.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:38.622Z,1478863358.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:38.947Z,1478863358.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:38.998Z,1478863358.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:39.374Z,1478863359.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:39.405Z,1478863359.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:39.759Z,1478863359.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:39.801Z,1478863359.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:40.155Z,1478863360.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:40.188Z,1478863360.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:40.560Z,1478863360.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:40.576Z,1478863360.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:40.945Z,1478863360.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:40.981Z,1478863360.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:41.347Z,1478863361.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:41.385Z,1478863361.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:41.745Z,1478863361.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:41.781Z,1478863361.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:42.148Z,1478863362.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:42.170Z,1478863362.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:42.547Z,1478863362.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:42.586Z,1478863362.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:42.971Z,1478863362.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:43.023Z,1478863363.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:43.347Z,1478863363.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:43.380Z,1478863363.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:43.745Z,1478863363.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:43.771Z,1478863363.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:44.145Z,1478863364.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:44.239Z,1478863364.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:44.545Z,1478863364.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:44.560Z,1478863364.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:44.965Z,1478863364.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:45.017Z,1478863365.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:45.357Z,1478863365.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:45.372Z,1478863365.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:45.758Z,1478863365.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:45.877Z,1478863365.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:46.153Z,1478863366.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:46.215Z,1478863366.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:46.552Z,1478863366.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:46.567Z,1478863366.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:46.974Z,1478863366.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:46.989Z,1478863366.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:47.369Z,1478863367.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:47.384Z,1478863367.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:47.757Z,1478863367.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:47.777Z,1478863367.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:48.145Z,1478863368.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:48.181Z,1478863368.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:48.564Z,1478863368.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:48.580Z,1478863368.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:48.971Z,1478863368.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:49.004Z,1478863369.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:49.345Z,1478863369.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:49.389Z,1478863369.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:49.754Z,1478863369.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:49.808Z,1478863369.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:50.155Z,1478863370.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:50.170Z,1478863370.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:50.555Z,1478863370.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:50.585Z,1478863370.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:50.947Z,1478863370.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:50.988Z,1478863370.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:51.347Z,1478863371.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:51.398Z,1478863371.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:51.746Z,1478863371.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:51.765Z,1478863371.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:52.147Z,1478863372.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:52.167Z,1478863372.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:52.556Z,1478863372.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:52.582Z,1478863372.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:52.947Z,1478863372.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:52.998Z,1478863372.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:53.351Z,1478863373.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:53.387Z,1478863373.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:53.755Z,1478863373.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:53.779Z,1478863373.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:54.147Z,1478863374.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:54.183Z,1478863374.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:54.549Z,1478863374.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:54.570Z,1478863374.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:54.954Z,1478863374.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:54.978Z,1478863374.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:55.347Z,1478863375.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:55.385Z,1478863375.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:55.747Z,1478863375.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:55.788Z,1478863375.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:56.147Z,1478863376.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:56.202Z,1478863376.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:56.547Z,1478863376.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:56.598Z,1478863376.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:56.946Z,1478863376.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:56.999Z,1478863376.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:22:57.346Z,1478863377.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:22:57.390Z,1478863377.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:02.854Z,1478863382.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:02.883Z,1478863382.883 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:23:02.883Z,1478863382.883 [BPC1] Communications Fault, FailCount= 1
2016-11-11T11:23:02.883Z,1478863382.883 [BPC1](ERROR): Communications Fault
2016-11-11T11:23:02.919Z,1478863382.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:02.956Z,1478863382.956 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:23:03.013Z,1478863383.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:03.065Z,1478863383.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:03.405Z,1478863383.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:03.433Z,1478863383.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:03.793Z,1478863383.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:03.813Z,1478863383.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:03.902Z,1478863383.902 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:23:03.902Z,1478863383.902 [BPC1] No Fault, FailCount= 1
2016-11-11T11:23:04.197Z,1478863384.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:04.284Z,1478863384.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:04.480Z,1478863384.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:04.601Z,1478863384.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:04.621Z,1478863384.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:04.997Z,1478863384.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:05.052Z,1478863385.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:05.276Z,1478863385.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:05.398Z,1478863385.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:05.414Z,1478863385.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:05.801Z,1478863385.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:05.821Z,1478863385.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:06.024Z,1478863386.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:06.197Z,1478863386.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:06.212Z,1478863386.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:06.599Z,1478863386.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:06.621Z,1478863386.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:06.820Z,1478863386.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:06.989Z,1478863386.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:07.021Z,1478863387.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:07.389Z,1478863387.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:07.421Z,1478863387.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:07.617Z,1478863387.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:07.790Z,1478863387.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:07.817Z,1478863387.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:08.028Z,1478863388.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:08.196Z,1478863388.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:08.228Z,1478863388.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:08.589Z,1478863388.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:08.621Z,1478863388.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:08.989Z,1478863388.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:09.026Z,1478863389.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:09.389Z,1478863389.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:09.429Z,1478863389.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:09.789Z,1478863389.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:09.829Z,1478863389.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:10.192Z,1478863390.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:10.208Z,1478863390.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:10.596Z,1478863390.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:10.617Z,1478863390.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:10.996Z,1478863390.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:11.014Z,1478863391.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:11.396Z,1478863391.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:11.411Z,1478863391.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:11.796Z,1478863391.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:11.817Z,1478863391.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:12.189Z,1478863392.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:12.214Z,1478863392.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:12.589Z,1478863392.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:12.624Z,1478863392.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:12.989Z,1478863392.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:13.021Z,1478863393.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:13.405Z,1478863393.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:13.425Z,1478863393.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:13.789Z,1478863393.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:13.809Z,1478863393.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:14.193Z,1478863394.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:14.244Z,1478863394.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:14.593Z,1478863394.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:14.608Z,1478863394.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:14.993Z,1478863394.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:15.013Z,1478863395.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:15.389Z,1478863395.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:15.409Z,1478863395.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:15.789Z,1478863395.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:15.809Z,1478863395.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:16.193Z,1478863396.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:16.213Z,1478863396.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:16.593Z,1478863396.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:16.613Z,1478863396.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:16.993Z,1478863396.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:17.053Z,1478863397.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:17.386Z,1478863397.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:17.401Z,1478863397.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:17.789Z,1478863397.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:17.809Z,1478863397.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:18.193Z,1478863398.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:18.252Z,1478863398.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:18.589Z,1478863398.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:18.680Z,1478863398.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:18.993Z,1478863398.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:19.034Z,1478863399.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:19.393Z,1478863399.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:19.434Z,1478863399.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:19.789Z,1478863399.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:19.804Z,1478863399.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:20.193Z,1478863400.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:20.208Z,1478863400.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:20.589Z,1478863400.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:20.609Z,1478863400.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:20.993Z,1478863400.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:21.009Z,1478863401.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:21.389Z,1478863401.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:21.409Z,1478863401.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:21.793Z,1478863401.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:21.813Z,1478863401.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:22.189Z,1478863402.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:22.205Z,1478863402.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:22.316Z,1478863402.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:22.593Z,1478863402.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:22.608Z,1478863402.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:22.989Z,1478863402.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:23.009Z,1478863403.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:23.113Z,1478863403.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:23.393Z,1478863403.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:23.409Z,1478863403.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:23.793Z,1478863403.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:23.810Z,1478863403.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:24.193Z,1478863404.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:24.208Z,1478863404.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:24.586Z,1478863404.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:24.601Z,1478863404.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:24.989Z,1478863404.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:25.009Z,1478863405.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:25.393Z,1478863405.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:25.408Z,1478863405.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:25.793Z,1478863405.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:25.808Z,1478863405.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:26.193Z,1478863406.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:26.208Z,1478863406.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:26.592Z,1478863406.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:26.613Z,1478863406.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:26.993Z,1478863406.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:27.009Z,1478863407.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:27.403Z,1478863407.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:27.420Z,1478863407.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:27.793Z,1478863407.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:27.813Z,1478863407.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:28.193Z,1478863408.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:28.213Z,1478863408.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:28.589Z,1478863408.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:28.604Z,1478863408.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:28.993Z,1478863408.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:29.013Z,1478863409.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:29.389Z,1478863409.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:29.405Z,1478863409.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:29.793Z,1478863409.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:29.813Z,1478863409.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:30.190Z,1478863410.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:30.217Z,1478863410.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:30.589Z,1478863410.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:30.613Z,1478863410.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:30.990Z,1478863410.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:31.032Z,1478863411.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:31.391Z,1478863411.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:31.495Z,1478863411.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:31.789Z,1478863411.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:31.818Z,1478863411.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:32.189Z,1478863412.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:32.233Z,1478863412.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:32.590Z,1478863412.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:32.617Z,1478863412.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:32.989Z,1478863412.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:33.037Z,1478863413.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:33.389Z,1478863413.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:33.433Z,1478863413.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:33.790Z,1478863413.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:33.817Z,1478863413.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:34.189Z,1478863414.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:34.213Z,1478863414.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:34.589Z,1478863414.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:34.617Z,1478863414.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:34.997Z,1478863414.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:35.030Z,1478863415.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:35.394Z,1478863415.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:35.413Z,1478863415.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:35.794Z,1478863415.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:35.813Z,1478863415.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:36.193Z,1478863416.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:36.208Z,1478863416.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:36.600Z,1478863416.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:36.616Z,1478863416.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:36.995Z,1478863416.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:37.017Z,1478863417.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:37.393Z,1478863417.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:37.418Z,1478863417.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:37.789Z,1478863417.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:37.825Z,1478863417.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:38.189Z,1478863418.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:38.225Z,1478863418.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:38.593Z,1478863418.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:38.625Z,1478863418.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:38.989Z,1478863418.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:39.016Z,1478863419.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:39.397Z,1478863419.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:39.433Z,1478863419.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:39.793Z,1478863419.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:39.813Z,1478863419.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:40.195Z,1478863420.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:40.210Z,1478863420.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:40.596Z,1478863420.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:40.611Z,1478863420.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:40.991Z,1478863420.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:41.024Z,1478863421.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:41.404Z,1478863421.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:41.420Z,1478863421.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:41.789Z,1478863421.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:41.825Z,1478863421.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:42.189Z,1478863422.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:42.221Z,1478863422.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:42.593Z,1478863422.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:42.619Z,1478863422.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:42.989Z,1478863422.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:43.016Z,1478863423.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:43.404Z,1478863423.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:43.420Z,1478863423.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:43.797Z,1478863423.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:43.813Z,1478863423.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:44.189Z,1478863424.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:44.221Z,1478863424.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:44.590Z,1478863424.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:44.625Z,1478863424.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:44.990Z,1478863424.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:45.005Z,1478863425.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:45.390Z,1478863425.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:45.409Z,1478863425.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:45.794Z,1478863425.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:45.869Z,1478863425.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:46.196Z,1478863426.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:46.212Z,1478863426.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:46.400Z,1478863426.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:46.597Z,1478863426.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:46.648Z,1478863426.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:46.996Z,1478863426.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:47.017Z,1478863427.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:47.196Z,1478863427.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:47.400Z,1478863427.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:47.459Z,1478863427.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:47.789Z,1478863427.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:47.838Z,1478863427.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:48.189Z,1478863428.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:48.224Z,1478863428.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:48.589Z,1478863428.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:48.622Z,1478863428.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:48.989Z,1478863428.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:49.022Z,1478863429.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:49.389Z,1478863429.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:49.421Z,1478863429.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:49.789Z,1478863429.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:49.821Z,1478863429.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:50.193Z,1478863430.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:50.225Z,1478863430.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:50.589Z,1478863430.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:50.616Z,1478863430.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:50.989Z,1478863430.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:51.005Z,1478863431.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:51.394Z,1478863431.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:51.409Z,1478863431.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:51.796Z,1478863431.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:51.811Z,1478863431.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:52.195Z,1478863432.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:52.210Z,1478863432.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:52.596Z,1478863432.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:52.611Z,1478863432.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:52.996Z,1478863432.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:53.017Z,1478863433.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:53.400Z,1478863433.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:53.423Z,1478863433.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:53.789Z,1478863433.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:53.823Z,1478863433.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:54.189Z,1478863434.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:54.222Z,1478863434.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:54.589Z,1478863434.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:54.621Z,1478863434.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:54.989Z,1478863434.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:55.022Z,1478863435.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:55.400Z,1478863435.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:55.431Z,1478863435.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:55.789Z,1478863435.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:55.820Z,1478863435.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:56.189Z,1478863436.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:56.209Z,1478863436.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:56.593Z,1478863436.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:56.613Z,1478863436.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:56.996Z,1478863436.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:57.012Z,1478863437.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:23:57.397Z,1478863437.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:23:57.412Z,1478863437.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:00.806Z,1478863440.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:00.905Z,1478863440.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:00.994Z,1478863440.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:01.025Z,1478863441.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:01.380Z,1478863441.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:01.395Z,1478863441.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:01.784Z,1478863441.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:01.838Z,1478863441.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:02.181Z,1478863442.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:02.196Z,1478863442.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:02.580Z,1478863442.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:02.618Z,1478863442.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:02.973Z,1478863442.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:03.031Z,1478863443.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:03.373Z,1478863443.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:03.405Z,1478863443.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:03.773Z,1478863443.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:03.798Z,1478863443.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:04.189Z,1478863444.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:04.204Z,1478863444.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:04.573Z,1478863444.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:04.605Z,1478863444.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:04.973Z,1478863444.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:05.005Z,1478863445.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:05.381Z,1478863445.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:05.415Z,1478863445.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:05.773Z,1478863445.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:05.800Z,1478863445.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:06.173Z,1478863446.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:06.193Z,1478863446.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:06.574Z,1478863446.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:06.656Z,1478863446.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:06.973Z,1478863446.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:06.989Z,1478863446.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:07.385Z,1478863447.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:07.405Z,1478863447.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:07.781Z,1478863447.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:07.808Z,1478863447.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:08.181Z,1478863448.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:08.197Z,1478863448.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:08.573Z,1478863448.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:08.606Z,1478863448.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:08.988Z,1478863448.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:09.009Z,1478863449.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:09.373Z,1478863449.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:09.389Z,1478863449.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:09.773Z,1478863449.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:09.801Z,1478863449.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:10.176Z,1478863450.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:10.206Z,1478863450.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:10.580Z,1478863450.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:10.595Z,1478863450.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:10.976Z,1478863450.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:11.008Z,1478863451.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:11.381Z,1478863451.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:11.407Z,1478863451.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:11.773Z,1478863451.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:11.801Z,1478863451.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:12.173Z,1478863452.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:12.209Z,1478863452.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:12.573Z,1478863452.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:12.593Z,1478863452.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:12.979Z,1478863452.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:12.995Z,1478863452.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:13.384Z,1478863453.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:13.400Z,1478863453.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:13.777Z,1478863453.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:13.797Z,1478863453.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:14.181Z,1478863454.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:14.196Z,1478863454.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:14.576Z,1478863454.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:14.601Z,1478863454.601 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:14.601Z,1478863454.601 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 112
2016-11-11T11:24:14.601Z,1478863454.601 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:24:14.624Z,1478863454.624 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:14.624Z,1478863454.624 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 112
2016-11-11T11:24:14.624Z,1478863454.624 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:24:14.626Z,1478863454.626 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:14.626Z,1478863454.626 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 112
2016-11-11T11:24:14.626Z,1478863454.626 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:24:14.662Z,1478863454.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:24:14.663Z,1478863454.663 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:24:14.667Z,1478863454.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:24:14.985Z,1478863454.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:15.098Z,1478863455.098 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:24:15.098Z,1478863455.098 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 112
2016-11-11T11:24:15.099Z,1478863455.099 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:24:15.099Z,1478863455.099 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 112
2016-11-11T11:24:15.100Z,1478863455.100 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:24:15.100Z,1478863455.100 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 112
2016-11-11T11:24:15.381Z,1478863455.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:15.395Z,1478863455.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:24:15.396Z,1478863455.396 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:24:15.396Z,1478863455.396 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:24:15.401Z,1478863455.401 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:24:15.401Z,1478863455.401 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:24:15.402Z,1478863455.402 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:24:15.402Z,1478863455.402 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:24:15.403Z,1478863455.403 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:24:15.403Z,1478863455.403 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:24:15.773Z,1478863455.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:15.828Z,1478863455.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:16.173Z,1478863456.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:16.205Z,1478863456.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:16.573Z,1478863456.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:16.618Z,1478863456.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:16.973Z,1478863456.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:17.030Z,1478863457.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:17.373Z,1478863457.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:17.409Z,1478863457.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:17.781Z,1478863457.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:17.797Z,1478863457.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:18.181Z,1478863458.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:18.204Z,1478863458.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:18.573Z,1478863458.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:18.605Z,1478863458.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:18.973Z,1478863458.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:19.045Z,1478863459.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:19.373Z,1478863459.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:19.398Z,1478863459.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:19.777Z,1478863459.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:19.815Z,1478863459.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:20.173Z,1478863460.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:20.205Z,1478863460.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:20.573Z,1478863460.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:20.588Z,1478863460.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:20.977Z,1478863460.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:20.997Z,1478863460.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:21.380Z,1478863461.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:21.399Z,1478863461.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:21.781Z,1478863461.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:21.801Z,1478863461.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:22.173Z,1478863462.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:22.208Z,1478863462.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:22.573Z,1478863462.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:22.612Z,1478863462.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:22.974Z,1478863462.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:23.052Z,1478863463.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:23.381Z,1478863463.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:23.401Z,1478863463.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:23.781Z,1478863463.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:23.801Z,1478863463.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:24.177Z,1478863464.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:24.213Z,1478863464.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:24.573Z,1478863464.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:24.611Z,1478863464.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:24.973Z,1478863464.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:25.077Z,1478863465.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:25.373Z,1478863465.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:25.394Z,1478863465.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:25.776Z,1478863465.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:25.816Z,1478863465.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:26.173Z,1478863466.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:26.197Z,1478863466.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:26.578Z,1478863466.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:26.593Z,1478863466.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:26.980Z,1478863466.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:26.996Z,1478863466.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:27.385Z,1478863467.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:27.405Z,1478863467.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:27.780Z,1478863467.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:27.799Z,1478863467.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:28.177Z,1478863468.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:28.205Z,1478863468.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:28.576Z,1478863468.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:28.612Z,1478863468.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:28.973Z,1478863468.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:29.057Z,1478863469.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:29.373Z,1478863469.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:29.410Z,1478863469.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:29.773Z,1478863469.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:29.819Z,1478863469.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:30.173Z,1478863470.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:30.226Z,1478863470.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:30.573Z,1478863470.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:30.621Z,1478863470.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:30.978Z,1478863470.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:31.029Z,1478863471.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:31.378Z,1478863471.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:31.426Z,1478863471.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:31.781Z,1478863471.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:31.805Z,1478863471.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:32.184Z,1478863472.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:32.204Z,1478863472.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:32.573Z,1478863472.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:32.602Z,1478863472.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:32.973Z,1478863472.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:33.074Z,1478863473.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:33.373Z,1478863473.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:33.418Z,1478863473.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:33.773Z,1478863473.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:33.795Z,1478863473.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:34.171Z,1478863474.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:34.190Z,1478863474.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:34.573Z,1478863474.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:34.597Z,1478863474.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:34.984Z,1478863474.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:35.055Z,1478863475.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:35.380Z,1478863475.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:35.398Z,1478863475.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:35.784Z,1478863475.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:35.799Z,1478863475.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:36.181Z,1478863476.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:36.210Z,1478863476.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:36.570Z,1478863476.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:36.606Z,1478863476.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:36.998Z,1478863476.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:37.068Z,1478863477.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:37.379Z,1478863477.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:37.413Z,1478863477.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:37.801Z,1478863477.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:37.824Z,1478863477.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:38.173Z,1478863478.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:38.211Z,1478863478.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:38.573Z,1478863478.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:38.609Z,1478863478.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:38.995Z,1478863478.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:39.058Z,1478863479.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:39.373Z,1478863479.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:39.416Z,1478863479.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:39.773Z,1478863479.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:39.819Z,1478863479.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:40.174Z,1478863480.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:40.217Z,1478863480.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:40.579Z,1478863480.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:40.595Z,1478863480.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:40.985Z,1478863480.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:41.025Z,1478863481.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:41.380Z,1478863481.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:41.409Z,1478863481.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:41.779Z,1478863481.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:41.803Z,1478863481.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:42.176Z,1478863482.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:42.205Z,1478863482.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:42.577Z,1478863482.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:42.617Z,1478863482.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:42.973Z,1478863482.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:43.004Z,1478863483.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:43.380Z,1478863483.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:43.426Z,1478863483.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:43.775Z,1478863483.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:43.826Z,1478863483.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:44.177Z,1478863484.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:44.216Z,1478863484.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:44.573Z,1478863484.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:44.630Z,1478863484.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:44.976Z,1478863484.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:44.997Z,1478863484.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:45.376Z,1478863485.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:45.425Z,1478863485.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:45.780Z,1478863485.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:45.841Z,1478863485.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:46.178Z,1478863486.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:46.186Z,1478863486.186 [PNI_TCM](ERROR): CRC does not match. Expected:0x28395 got:0x26148
2016-11-11T11:24:46.206Z,1478863486.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:46.578Z,1478863486.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:46.609Z,1478863486.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:46.995Z,1478863486.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:47.058Z,1478863487.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:47.373Z,1478863487.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:47.405Z,1478863487.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:47.782Z,1478863487.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:47.806Z,1478863487.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:48.175Z,1478863488.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:48.209Z,1478863488.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:48.574Z,1478863488.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:48.608Z,1478863488.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:49.042Z,1478863489.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:49.070Z,1478863489.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:49.379Z,1478863489.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:49.415Z,1478863489.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:49.782Z,1478863489.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:49.809Z,1478863489.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:50.177Z,1478863490.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:50.197Z,1478863490.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:50.576Z,1478863490.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:50.618Z,1478863490.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:51.026Z,1478863491.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:51.037Z,1478863491.037 [PNI_TCM](ERROR): CRC does not match. Expected:0x23674 got:0x16866
2016-11-11T11:24:51.069Z,1478863491.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:51.379Z,1478863491.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:51.394Z,1478863491.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:51.776Z,1478863491.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:51.797Z,1478863491.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:52.178Z,1478863492.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:52.195Z,1478863492.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:52.580Z,1478863492.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:52.607Z,1478863492.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:53.018Z,1478863493.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:53.058Z,1478863493.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:53.373Z,1478863493.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:53.408Z,1478863493.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:53.774Z,1478863493.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:53.809Z,1478863493.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:54.175Z,1478863494.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:54.209Z,1478863494.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:54.575Z,1478863494.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:54.609Z,1478863494.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:54.977Z,1478863494.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:55.004Z,1478863495.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:55.374Z,1478863495.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:55.404Z,1478863495.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:55.775Z,1478863495.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:55.821Z,1478863495.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:56.177Z,1478863496.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:56.214Z,1478863496.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:56.573Z,1478863496.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:56.593Z,1478863496.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:56.988Z,1478863496.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:57.003Z,1478863497.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:57.380Z,1478863497.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:57.402Z,1478863497.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:24:57.778Z,1478863497.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:24:57.822Z,1478863497.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:01.205Z,1478863501.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:01.214Z,1478863501.214 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:25:01.214Z,1478863501.214 [BPC1] Communications Fault, FailCount= 1
2016-11-11T11:25:01.214Z,1478863501.214 [BPC1](ERROR): Communications Fault
2016-11-11T11:25:01.222Z,1478863501.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:01.285Z,1478863501.285 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:25:01.330Z,1478863501.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:01.362Z,1478863501.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:01.725Z,1478863501.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:01.771Z,1478863501.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:02.128Z,1478863502.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:02.143Z,1478863502.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:02.188Z,1478863502.188 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:25:02.189Z,1478863502.188 [BPC1] No Fault, FailCount= 1
2016-11-11T11:25:02.530Z,1478863502.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:02.611Z,1478863502.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:02.931Z,1478863502.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:03.048Z,1478863503.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:03.331Z,1478863503.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:03.381Z,1478863503.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:03.733Z,1478863503.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:03.749Z,1478863503.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:04.132Z,1478863504.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:04.157Z,1478863504.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:04.532Z,1478863504.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:04.553Z,1478863504.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:04.942Z,1478863504.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:05.030Z,1478863505.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:05.325Z,1478863505.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:05.369Z,1478863505.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:05.726Z,1478863505.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:05.760Z,1478863505.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:06.126Z,1478863506.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:06.163Z,1478863506.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:06.525Z,1478863506.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:06.561Z,1478863506.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:06.934Z,1478863506.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:07.010Z,1478863507.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:07.325Z,1478863507.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:07.361Z,1478863507.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:07.726Z,1478863507.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:07.734Z,1478863507.734 [PNI_TCM](ERROR): CRC does not match. Expected:0x7329 got:0x20779
2016-11-11T11:25:07.765Z,1478863507.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:08.125Z,1478863508.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:08.170Z,1478863508.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:08.525Z,1478863508.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:08.542Z,1478863508.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:08.925Z,1478863508.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:08.944Z,1478863508.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:09.327Z,1478863509.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:09.343Z,1478863509.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:09.728Z,1478863509.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:09.777Z,1478863509.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:10.133Z,1478863510.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:10.152Z,1478863510.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:10.535Z,1478863510.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:10.550Z,1478863510.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:10.939Z,1478863510.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:10.955Z,1478863510.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:11.332Z,1478863511.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:11.365Z,1478863511.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:11.725Z,1478863511.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:11.763Z,1478863511.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:12.126Z,1478863512.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:12.160Z,1478863512.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:12.532Z,1478863512.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:12.570Z,1478863512.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:12.925Z,1478863512.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:12.967Z,1478863512.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:13.325Z,1478863513.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:13.345Z,1478863513.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:13.732Z,1478863513.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:13.793Z,1478863513.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:14.127Z,1478863514.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:14.161Z,1478863514.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:14.525Z,1478863514.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:14.569Z,1478863514.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:14.964Z,1478863514.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:14.973Z,1478863514.973 [PNI_TCM](ERROR): CRC does not match. Expected:0x42916 got:0x48998
2016-11-11T11:25:15.021Z,1478863515.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:15.327Z,1478863515.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:15.355Z,1478863515.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:15.731Z,1478863515.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:15.798Z,1478863515.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:16.125Z,1478863516.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:16.186Z,1478863516.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:16.525Z,1478863516.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:16.554Z,1478863516.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:16.999Z,1478863516.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:17.035Z,1478863517.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:17.328Z,1478863517.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:17.355Z,1478863517.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:17.725Z,1478863517.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:17.764Z,1478863517.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:18.126Z,1478863518.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:18.144Z,1478863518.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:18.527Z,1478863518.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:18.549Z,1478863518.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:18.974Z,1478863518.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:19.022Z,1478863519.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:19.329Z,1478863519.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:19.370Z,1478863519.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:19.733Z,1478863519.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:19.739Z,1478863519.739 [PNI_TCM](ERROR): CRC does not match. Expected:0x10602 got:0x6978
2016-11-11T11:25:19.773Z,1478863519.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:20.127Z,1478863520.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:20.162Z,1478863520.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:20.536Z,1478863520.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:20.552Z,1478863520.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:20.941Z,1478863520.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:21.004Z,1478863521.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:21.335Z,1478863521.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:21.350Z,1478863521.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:21.735Z,1478863521.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:21.762Z,1478863521.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:22.125Z,1478863522.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:22.157Z,1478863522.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:22.537Z,1478863522.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:22.561Z,1478863522.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:22.927Z,1478863522.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:22.961Z,1478863522.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:23.327Z,1478863523.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:23.343Z,1478863523.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:23.729Z,1478863523.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:23.745Z,1478863523.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:24.126Z,1478863524.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:24.173Z,1478863524.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:24.536Z,1478863524.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:24.557Z,1478863524.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:24.933Z,1478863524.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:24.950Z,1478863524.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:25.333Z,1478863525.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:25.349Z,1478863525.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:25.729Z,1478863525.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:25.765Z,1478863525.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:26.127Z,1478863526.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:26.161Z,1478863526.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:26.529Z,1478863526.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:26.581Z,1478863526.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:26.929Z,1478863526.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:26.965Z,1478863526.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:27.331Z,1478863527.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:27.423Z,1478863527.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:27.738Z,1478863527.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:27.801Z,1478863527.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:28.129Z,1478863528.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:28.161Z,1478863528.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:28.525Z,1478863528.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:28.561Z,1478863528.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:28.935Z,1478863528.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:29.018Z,1478863529.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:29.327Z,1478863529.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:29.361Z,1478863529.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:29.725Z,1478863529.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:29.773Z,1478863529.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:30.129Z,1478863530.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:30.185Z,1478863530.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:30.527Z,1478863530.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:30.562Z,1478863530.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:30.950Z,1478863530.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:30.992Z,1478863530.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:31.329Z,1478863531.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:31.361Z,1478863531.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:31.725Z,1478863531.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:31.750Z,1478863531.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:32.126Z,1478863532.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:32.160Z,1478863532.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:32.529Z,1478863532.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:32.561Z,1478863532.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:32.961Z,1478863532.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:33.010Z,1478863533.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:33.325Z,1478863533.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:33.361Z,1478863533.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:33.727Z,1478863533.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:33.757Z,1478863533.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:34.126Z,1478863534.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:34.157Z,1478863534.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:34.525Z,1478863534.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:34.560Z,1478863534.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:34.934Z,1478863534.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:34.985Z,1478863534.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:35.338Z,1478863535.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:35.354Z,1478863535.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:35.732Z,1478863535.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:35.748Z,1478863535.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:36.128Z,1478863536.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:36.146Z,1478863536.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:36.532Z,1478863536.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:36.553Z,1478863536.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:36.935Z,1478863536.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:36.955Z,1478863536.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:37.326Z,1478863537.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:37.357Z,1478863537.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:37.725Z,1478863537.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:37.762Z,1478863537.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:38.126Z,1478863538.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:38.161Z,1478863538.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:38.534Z,1478863538.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:38.570Z,1478863538.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:38.929Z,1478863538.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:38.945Z,1478863538.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:39.332Z,1478863539.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:39.411Z,1478863539.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:39.733Z,1478863539.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:39.750Z,1478863539.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:40.134Z,1478863540.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:40.142Z,1478863540.142 [BPC1](ERROR): Failed to parse message.
2016-11-11T11:25:40.142Z,1478863540.142 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T11:25:40.142Z,1478863540.142 [BPC1] Data Fault, FailCount= 1
2016-11-11T11:25:40.142Z,1478863540.142 [BPC1](ERROR): Data Fault
2016-11-11T11:25:40.165Z,1478863540.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:40.242Z,1478863540.241 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T11:25:40.525Z,1478863540.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:40.561Z,1478863540.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:40.925Z,1478863540.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:40.958Z,1478863540.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:41.332Z,1478863541.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:41.423Z,1478863541.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:41.464Z,1478863541.464 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:25:41.464Z,1478863541.464 [BPC1] No Fault, FailCount= 1
2016-11-11T11:25:41.739Z,1478863541.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:41.817Z,1478863541.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:42.132Z,1478863542.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:42.147Z,1478863542.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:42.525Z,1478863542.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:42.593Z,1478863542.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:42.958Z,1478863542.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:43.005Z,1478863543.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:43.326Z,1478863543.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:43.353Z,1478863543.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:43.725Z,1478863543.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:43.762Z,1478863543.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:44.129Z,1478863544.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:44.169Z,1478863544.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:44.525Z,1478863544.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:44.540Z,1478863544.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:44.941Z,1478863544.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:44.990Z,1478863544.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:45.326Z,1478863545.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:45.345Z,1478863545.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:45.728Z,1478863545.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:45.744Z,1478863545.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:46.126Z,1478863546.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:46.161Z,1478863546.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:46.532Z,1478863546.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:46.547Z,1478863546.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:46.951Z,1478863546.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:46.991Z,1478863546.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:47.330Z,1478863547.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:47.356Z,1478863547.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:47.725Z,1478863547.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:47.761Z,1478863547.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:48.126Z,1478863548.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:48.149Z,1478863548.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:48.529Z,1478863548.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:48.562Z,1478863548.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:48.939Z,1478863548.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:48.991Z,1478863548.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:49.329Z,1478863549.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:49.345Z,1478863549.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:49.730Z,1478863549.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:49.745Z,1478863549.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:50.133Z,1478863550.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:50.153Z,1478863550.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:50.531Z,1478863550.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:50.547Z,1478863550.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:50.928Z,1478863550.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:50.952Z,1478863550.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:51.329Z,1478863551.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:51.365Z,1478863551.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:51.725Z,1478863551.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:51.762Z,1478863551.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:52.125Z,1478863552.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:52.145Z,1478863552.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:52.528Z,1478863552.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:52.549Z,1478863552.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:52.934Z,1478863552.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:52.953Z,1478863552.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:53.367Z,1478863553.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:53.446Z,1478863553.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:53.732Z,1478863553.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:53.753Z,1478863553.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:54.132Z,1478863554.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:54.148Z,1478863554.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:54.533Z,1478863554.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:54.566Z,1478863554.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:54.933Z,1478863554.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:54.953Z,1478863554.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:55.350Z,1478863555.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:55.408Z,1478863555.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:55.460Z,1478863555.460 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T11:25:55.732Z,1478863555.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:55.786Z,1478863555.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:56.125Z,1478863556.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:56.165Z,1478863556.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:56.525Z,1478863556.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:56.577Z,1478863556.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:56.927Z,1478863556.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:56.975Z,1478863556.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:57.329Z,1478863557.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:57.363Z,1478863557.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:57.724Z,1478863557.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:57.761Z,1478863557.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:25:58.134Z,1478863558.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:25:58.165Z,1478863558.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:01.693Z,1478863561.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:01.725Z,1478863561.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:01.824Z,1478863561.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:01.860Z,1478863561.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:02.224Z,1478863562.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:02.239Z,1478863562.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:02.623Z,1478863562.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:02.638Z,1478863562.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:03.029Z,1478863563.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:03.044Z,1478863563.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:03.424Z,1478863563.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:03.440Z,1478863563.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:03.828Z,1478863563.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:03.849Z,1478863563.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:04.224Z,1478863564.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:04.248Z,1478863564.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:04.617Z,1478863564.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:04.651Z,1478863564.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:05.028Z,1478863565.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:05.068Z,1478863565.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:05.417Z,1478863565.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:05.449Z,1478863565.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:05.817Z,1478863565.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:05.853Z,1478863565.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:06.217Z,1478863566.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:06.253Z,1478863566.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:06.617Z,1478863566.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:06.654Z,1478863566.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:07.017Z,1478863567.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:07.045Z,1478863567.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:07.417Z,1478863567.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:07.433Z,1478863567.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:07.821Z,1478863567.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:07.869Z,1478863567.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:08.217Z,1478863568.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:08.237Z,1478863568.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:08.616Z,1478863568.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:08.637Z,1478863568.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:09.021Z,1478863569.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:09.073Z,1478863569.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:09.424Z,1478863569.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:09.440Z,1478863569.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:09.820Z,1478863569.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:09.849Z,1478863569.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:10.220Z,1478863570.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:10.248Z,1478863570.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:10.624Z,1478863570.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:10.679Z,1478863570.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:11.025Z,1478863571.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:11.045Z,1478863571.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:11.428Z,1478863571.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:11.480Z,1478863571.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:11.832Z,1478863571.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:11.882Z,1478863571.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:12.224Z,1478863572.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:12.239Z,1478863572.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:12.632Z,1478863572.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:12.653Z,1478863572.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:13.032Z,1478863573.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:13.048Z,1478863573.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:13.417Z,1478863573.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:13.449Z,1478863573.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:13.821Z,1478863573.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:13.853Z,1478863573.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:14.217Z,1478863574.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:14.260Z,1478863574.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:14.617Z,1478863574.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:14.632Z,1478863574.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:15.029Z,1478863575.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:15.061Z,1478863575.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:15.417Z,1478863575.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:15.432Z,1478863575.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:15.817Z,1478863575.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:15.837Z,1478863575.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:16.229Z,1478863576.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:16.244Z,1478863576.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:16.624Z,1478863576.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:16.639Z,1478863576.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:17.029Z,1478863577.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:17.044Z,1478863577.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:17.427Z,1478863577.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:17.443Z,1478863577.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:17.823Z,1478863577.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:17.845Z,1478863577.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:18.224Z,1478863578.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:18.239Z,1478863578.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:18.629Z,1478863578.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:18.644Z,1478863578.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:19.027Z,1478863579.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:19.045Z,1478863579.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:19.428Z,1478863579.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:19.449Z,1478863579.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:19.817Z,1478863579.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:19.849Z,1478863579.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:20.217Z,1478863580.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:20.257Z,1478863580.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:20.617Z,1478863580.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:20.649Z,1478863580.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:21.018Z,1478863581.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:21.043Z,1478863581.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:21.432Z,1478863581.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:21.448Z,1478863581.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:21.828Z,1478863581.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:21.861Z,1478863581.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:22.217Z,1478863582.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:22.249Z,1478863582.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:22.617Z,1478863582.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:22.677Z,1478863582.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:23.017Z,1478863583.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:23.054Z,1478863583.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:23.421Z,1478863583.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:23.447Z,1478863583.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:23.821Z,1478863583.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:23.847Z,1478863583.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:24.217Z,1478863584.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:24.277Z,1478863584.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:24.618Z,1478863584.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:24.646Z,1478863584.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:25.025Z,1478863585.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:25.045Z,1478863585.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:25.421Z,1478863585.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:25.474Z,1478863585.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:25.823Z,1478863585.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:25.853Z,1478863585.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:26.225Z,1478863586.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:26.283Z,1478863586.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:26.626Z,1478863586.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:26.666Z,1478863586.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:27.028Z,1478863587.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:27.052Z,1478863587.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:27.421Z,1478863587.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:27.453Z,1478863587.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:27.817Z,1478863587.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:27.852Z,1478863587.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:28.217Z,1478863588.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:28.249Z,1478863588.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:28.617Z,1478863588.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:28.650Z,1478863588.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:29.037Z,1478863589.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:29.077Z,1478863589.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:29.414Z,1478863589.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:29.437Z,1478863589.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:29.817Z,1478863589.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:29.854Z,1478863589.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:30.217Z,1478863590.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:30.244Z,1478863590.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:30.617Z,1478863590.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:30.632Z,1478863590.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:31.033Z,1478863591.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:31.056Z,1478863591.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:31.417Z,1478863591.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:31.437Z,1478863591.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:31.817Z,1478863591.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:31.832Z,1478863591.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:32.224Z,1478863592.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:32.239Z,1478863592.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:32.624Z,1478863592.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:32.638Z,1478863592.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:33.030Z,1478863593.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:33.049Z,1478863593.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:33.420Z,1478863593.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:33.449Z,1478863593.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:33.824Z,1478863593.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:33.845Z,1478863593.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:34.233Z,1478863594.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:34.248Z,1478863594.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:34.617Z,1478863594.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:34.652Z,1478863594.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:35.028Z,1478863595.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:35.044Z,1478863595.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:35.417Z,1478863595.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:35.442Z,1478863595.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:35.828Z,1478863595.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:35.851Z,1478863595.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:36.221Z,1478863596.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:36.253Z,1478863596.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:36.617Z,1478863596.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:36.649Z,1478863596.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:37.021Z,1478863597.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:37.053Z,1478863597.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:37.425Z,1478863597.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:37.493Z,1478863597.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:37.817Z,1478863597.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:37.853Z,1478863597.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:38.217Z,1478863598.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:38.253Z,1478863598.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:38.617Z,1478863598.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:38.677Z,1478863598.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:39.017Z,1478863599.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:39.041Z,1478863599.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:39.417Z,1478863599.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:39.457Z,1478863599.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:39.817Z,1478863599.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:39.862Z,1478863599.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:40.217Z,1478863600.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:40.237Z,1478863600.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:40.620Z,1478863600.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:40.667Z,1478863600.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:41.022Z,1478863601.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:41.070Z,1478863601.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:41.420Z,1478863601.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:41.436Z,1478863601.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:41.817Z,1478863601.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:41.845Z,1478863601.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:42.221Z,1478863602.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:42.236Z,1478863602.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:42.624Z,1478863602.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:42.639Z,1478863602.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:43.033Z,1478863603.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:43.048Z,1478863603.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:43.424Z,1478863603.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:43.445Z,1478863603.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:43.824Z,1478863603.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:43.840Z,1478863603.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:44.232Z,1478863604.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:44.253Z,1478863604.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:44.617Z,1478863604.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:44.642Z,1478863604.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:45.025Z,1478863605.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:45.051Z,1478863605.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:45.417Z,1478863605.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:45.452Z,1478863605.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:45.817Z,1478863605.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:45.852Z,1478863605.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:46.217Z,1478863606.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:46.240Z,1478863606.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:46.617Z,1478863606.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:46.660Z,1478863606.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:47.025Z,1478863607.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:47.060Z,1478863607.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:47.417Z,1478863607.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:47.432Z,1478863607.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:47.821Z,1478863607.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:47.836Z,1478863607.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:48.220Z,1478863608.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:48.236Z,1478863608.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:48.622Z,1478863608.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:48.641Z,1478863608.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:49.029Z,1478863609.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:49.044Z,1478863609.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:49.424Z,1478863609.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:49.445Z,1478863609.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:49.824Z,1478863609.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:49.840Z,1478863609.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:50.220Z,1478863610.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:50.248Z,1478863610.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:50.632Z,1478863610.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:50.648Z,1478863610.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:51.017Z,1478863611.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:51.049Z,1478863611.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:51.417Z,1478863611.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:51.443Z,1478863611.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:51.817Z,1478863611.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:51.876Z,1478863611.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:52.217Z,1478863612.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:52.254Z,1478863612.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:52.621Z,1478863612.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:52.653Z,1478863612.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:53.017Z,1478863613.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:53.077Z,1478863613.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:53.417Z,1478863613.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:53.437Z,1478863613.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:53.821Z,1478863613.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:53.836Z,1478863613.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:54.220Z,1478863614.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:54.271Z,1478863614.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:54.623Z,1478863614.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:54.638Z,1478863614.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:55.029Z,1478863615.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:55.086Z,1478863615.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:55.420Z,1478863615.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:55.441Z,1478863615.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:55.823Z,1478863615.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:55.876Z,1478863615.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:56.219Z,1478863616.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:56.251Z,1478863616.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:56.624Z,1478863616.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:56.645Z,1478863616.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:57.024Z,1478863617.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:57.039Z,1478863617.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:57.048Z,1478863617.048 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T11:26:57.048Z,1478863617.048 [Default:CheckIn:C.Wait] Stopped
2016-11-11T11:26:57.048Z,1478863617.048 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T11:26:57.048Z,1478863617.048 [Default:CheckIn:D] Running Loop=1
2016-11-11T11:26:57.431Z,1478863617.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:57.446Z,1478863617.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:57.455Z,1478863617.455 [Default:CheckIn:D] Stopped
2016-11-11T11:26:57.456Z,1478863617.455 [Default:CheckIn:E] Running Loop=1
2016-11-11T11:26:57.817Z,1478863617.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:57.851Z,1478863617.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:26:57.859Z,1478863617.859 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 396.935742 min 
2016-11-11T11:26:57.860Z,1478863617.860 [Default:CheckIn:E] Stopped
2016-11-11T11:26:57.860Z,1478863617.860 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T11:26:57.860Z,1478863617.860 [Default:CheckIn] Stopped
2016-11-11T11:26:57.860Z,1478863617.860 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T11:26:57.860Z,1478863617.860 [Default:CheckIn](INFO): Running loop #39
2016-11-11T11:26:57.860Z,1478863617.860 [Default:CheckIn] Running Loop=39
2016-11-11T11:26:57.860Z,1478863617.861 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T11:26:57.861Z,1478863617.861 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T11:26:58.218Z,1478863618.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:26:58.249Z,1478863618.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:01.712Z,1478863621.712 [NAL9602](INFO): Powering up
2016-11-11T11:27:01.739Z,1478863621.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:01.769Z,1478863621.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:01.914Z,1478863621.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:01.968Z,1478863621.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:02.289Z,1478863622.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:02.304Z,1478863622.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:02.688Z,1478863622.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:02.703Z,1478863622.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:03.089Z,1478863623.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:03.104Z,1478863623.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:03.493Z,1478863623.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:03.508Z,1478863623.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:03.888Z,1478863623.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:03.904Z,1478863623.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:04.288Z,1478863624.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:04.308Z,1478863624.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:04.681Z,1478863624.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:04.717Z,1478863624.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:05.081Z,1478863625.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:05.124Z,1478863625.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:05.496Z,1478863625.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:05.512Z,1478863625.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:05.881Z,1478863625.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:05.913Z,1478863625.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:06.281Z,1478863626.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:06.317Z,1478863626.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:06.689Z,1478863626.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:06.722Z,1478863626.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:07.095Z,1478863627.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:07.146Z,1478863627.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:07.488Z,1478863627.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:07.503Z,1478863627.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:07.890Z,1478863627.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:07.953Z,1478863627.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:08.281Z,1478863628.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:08.321Z,1478863628.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:08.681Z,1478863628.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:08.778Z,1478863628.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:09.089Z,1478863629.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:09.104Z,1478863629.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:09.484Z,1478863629.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:09.533Z,1478863629.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:09.892Z,1478863629.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:09.939Z,1478863629.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:10.288Z,1478863630.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:10.303Z,1478863630.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:10.689Z,1478863630.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:10.704Z,1478863630.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:11.097Z,1478863631.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:11.112Z,1478863631.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:11.489Z,1478863631.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:11.509Z,1478863631.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:11.881Z,1478863631.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:11.914Z,1478863631.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:12.292Z,1478863632.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:12.325Z,1478863632.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:12.665Z,1478863632.665 [NAL9602](INFO): NAL9602 initialized
2016-11-11T11:27:12.682Z,1478863632.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:12.709Z,1478863632.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:13.095Z,1478863633.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:13.112Z,1478863633.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:13.465Z,1478863633.465 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T11:27:13.465Z,1478863633.465 [NAL9602] Data Fault, FailCount= 4
2016-11-11T11:27:13.465Z,1478863633.465 [NAL9602](ERROR): Data Fault
2016-11-11T11:27:13.491Z,1478863633.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:13.533Z,1478863633.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:13.576Z,1478863633.576 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T11:27:13.864Z,1478863633.865 [NAL9602](INFO): Powering down
2016-11-11T11:27:13.882Z,1478863633.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:13.926Z,1478863633.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:14.281Z,1478863634.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:14.311Z,1478863634.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:14.681Z,1478863634.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:14.717Z,1478863634.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:14.763Z,1478863634.763 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T11:27:14.763Z,1478863634.763 [NAL9602] No Fault, FailCount= 4
2016-11-11T11:27:15.081Z,1478863635.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:15.118Z,1478863635.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:15.486Z,1478863635.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:15.501Z,1478863635.501 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:15.502Z,1478863635.502 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 113
2016-11-11T11:27:15.502Z,1478863635.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:27:15.530Z,1478863635.530 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:15.531Z,1478863635.531 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 113
2016-11-11T11:27:15.531Z,1478863635.531 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:27:15.534Z,1478863635.534 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:15.534Z,1478863635.534 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 113
2016-11-11T11:27:15.534Z,1478863635.534 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:27:15.562Z,1478863635.562 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:27:15.563Z,1478863635.563 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:27:15.565Z,1478863635.565 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:27:15.887Z,1478863635.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:15.919Z,1478863635.919 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:27:15.919Z,1478863635.919 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 113
2016-11-11T11:27:15.944Z,1478863635.944 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:27:15.944Z,1478863635.944 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 113
2016-11-11T11:27:15.944Z,1478863635.944 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:27:15.945Z,1478863635.944 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 113
2016-11-11T11:27:16.288Z,1478863636.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:16.302Z,1478863636.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:27:16.303Z,1478863636.303 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:27:16.303Z,1478863636.303 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:27:16.308Z,1478863636.308 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:27:16.308Z,1478863636.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:27:16.309Z,1478863636.309 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:27:16.309Z,1478863636.309 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:27:16.310Z,1478863636.310 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:27:16.310Z,1478863636.310 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:27:16.689Z,1478863636.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:16.709Z,1478863636.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:17.081Z,1478863637.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:17.113Z,1478863637.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:17.481Z,1478863637.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:17.506Z,1478863637.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:17.881Z,1478863637.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:17.913Z,1478863637.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:18.281Z,1478863638.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:18.301Z,1478863638.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:18.688Z,1478863638.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:18.704Z,1478863638.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:19.072Z,1478863639.072 [NAL9602](INFO): Powering up NAL9602
2016-11-11T11:27:19.089Z,1478863639.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:19.109Z,1478863639.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:19.489Z,1478863639.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:19.509Z,1478863639.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:19.889Z,1478863639.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:19.909Z,1478863639.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:20.281Z,1478863640.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:20.331Z,1478863640.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:20.681Z,1478863640.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:20.751Z,1478863640.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:21.088Z,1478863641.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:21.103Z,1478863641.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:21.488Z,1478863641.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:21.503Z,1478863641.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:21.889Z,1478863641.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:21.925Z,1478863641.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:22.289Z,1478863642.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:22.305Z,1478863642.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:22.681Z,1478863642.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:22.756Z,1478863642.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:23.085Z,1478863643.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:23.137Z,1478863643.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:23.488Z,1478863643.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:23.503Z,1478863643.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:23.888Z,1478863643.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:23.939Z,1478863643.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:24.288Z,1478863644.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:24.343Z,1478863644.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:24.688Z,1478863644.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:24.703Z,1478863644.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:25.096Z,1478863645.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:25.120Z,1478863645.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:25.481Z,1478863645.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:25.513Z,1478863645.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:25.881Z,1478863645.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:25.913Z,1478863645.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:26.281Z,1478863646.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:26.319Z,1478863646.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:26.681Z,1478863646.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:26.761Z,1478863646.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:27.081Z,1478863647.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:27.101Z,1478863647.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:27.481Z,1478863647.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:27.501Z,1478863647.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:27.888Z,1478863647.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:27.903Z,1478863647.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:28.284Z,1478863648.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:28.300Z,1478863648.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:28.688Z,1478863648.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:28.703Z,1478863648.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:29.093Z,1478863649.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:29.113Z,1478863649.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:29.498Z,1478863649.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:29.521Z,1478863649.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:29.869Z,1478863649.869 [NAL9602](INFO): NAL9602 initialized
2016-11-11T11:27:29.897Z,1478863649.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:29.946Z,1478863649.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:30.286Z,1478863650.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:30.320Z,1478863650.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:30.696Z,1478863650.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:30.725Z,1478863650.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:31.107Z,1478863651.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:31.126Z,1478863651.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:31.508Z,1478863651.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:31.530Z,1478863651.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:31.889Z,1478863651.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:31.932Z,1478863651.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:32.284Z,1478863652.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:32.313Z,1478863652.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:32.682Z,1478863652.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:32.722Z,1478863652.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:33.102Z,1478863653.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:33.127Z,1478863653.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:33.492Z,1478863653.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:33.526Z,1478863653.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:33.900Z,1478863653.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:33.933Z,1478863653.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:34.281Z,1478863654.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:34.321Z,1478863654.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:34.681Z,1478863654.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:34.766Z,1478863654.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:35.093Z,1478863655.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:35.109Z,1478863655.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:35.484Z,1478863655.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:35.516Z,1478863655.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:35.890Z,1478863655.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:35.951Z,1478863655.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:36.284Z,1478863656.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:36.369Z,1478863656.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:36.691Z,1478863656.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:36.778Z,1478863656.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:37.082Z,1478863657.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:37.146Z,1478863657.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:37.494Z,1478863657.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:37.542Z,1478863657.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:37.907Z,1478863657.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:37.970Z,1478863657.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:38.300Z,1478863658.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:38.353Z,1478863658.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:38.702Z,1478863658.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:38.818Z,1478863658.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:39.102Z,1478863659.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:39.143Z,1478863659.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:39.495Z,1478863659.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:39.525Z,1478863659.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:39.883Z,1478863659.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:39.940Z,1478863659.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:40.287Z,1478863660.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:40.336Z,1478863660.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:40.683Z,1478863660.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:40.734Z,1478863660.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:41.085Z,1478863661.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:41.133Z,1478863661.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:41.488Z,1478863661.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:41.521Z,1478863661.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:41.883Z,1478863661.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:41.954Z,1478863661.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:42.284Z,1478863662.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:42.325Z,1478863662.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:42.695Z,1478863662.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:42.734Z,1478863662.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:43.096Z,1478863663.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:43.125Z,1478863663.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:43.493Z,1478863663.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:43.546Z,1478863663.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:43.901Z,1478863663.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:43.949Z,1478863663.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:44.304Z,1478863664.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:44.352Z,1478863664.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:44.698Z,1478863664.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:44.736Z,1478863664.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:45.084Z,1478863665.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:45.111Z,1478863665.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:45.481Z,1478863665.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:45.517Z,1478863665.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:45.892Z,1478863665.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:45.919Z,1478863665.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:46.293Z,1478863666.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:46.345Z,1478863666.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:46.704Z,1478863666.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:46.740Z,1478863666.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:47.091Z,1478863667.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:47.112Z,1478863667.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:47.491Z,1478863667.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:47.507Z,1478863667.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:47.914Z,1478863667.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:48.009Z,1478863668.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:48.308Z,1478863668.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:48.332Z,1478863668.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:48.714Z,1478863668.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:48.793Z,1478863668.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:49.103Z,1478863669.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:49.156Z,1478863669.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:49.498Z,1478863669.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:49.564Z,1478863669.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:49.882Z,1478863669.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:49.918Z,1478863669.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:50.293Z,1478863670.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:50.300Z,1478863670.300 [PNI_TCM](ERROR): CRC does not match. Expected:0x64300 got:0x45118
2016-11-11T11:27:50.405Z,1478863670.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:50.717Z,1478863670.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:50.820Z,1478863670.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:51.083Z,1478863671.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:51.121Z,1478863671.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:51.483Z,1478863671.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:51.493Z,1478863671.493 [PNI_TCM](ERROR): CRC does not match. Expected:0x48431 got:0x25795
2016-11-11T11:27:51.556Z,1478863671.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:51.886Z,1478863671.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:51.893Z,1478863671.893 [PNI_TCM](ERROR): CRC does not match. Expected:0x24245 got:0x16865
2016-11-11T11:27:51.933Z,1478863671.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:52.297Z,1478863672.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:52.350Z,1478863672.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:52.743Z,1478863672.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:52.810Z,1478863672.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:53.093Z,1478863673.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:53.116Z,1478863673.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:53.493Z,1478863673.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:53.560Z,1478863673.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:53.886Z,1478863673.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:53.936Z,1478863673.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:54.283Z,1478863674.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:54.329Z,1478863674.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:54.736Z,1478863674.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:54.750Z,1478863674.750 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T11:27:54.802Z,1478863674.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:55.093Z,1478863675.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:55.144Z,1478863675.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:55.483Z,1478863675.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:55.529Z,1478863675.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:55.891Z,1478863675.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:55.917Z,1478863675.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:56.284Z,1478863676.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:56.325Z,1478863676.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:56.686Z,1478863676.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:56.733Z,1478863676.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:57.095Z,1478863677.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:57.141Z,1478863677.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:57.493Z,1478863677.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:57.521Z,1478863677.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:57.886Z,1478863677.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:57.933Z,1478863677.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:27:58.286Z,1478863678.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:27:58.326Z,1478863678.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:04.023Z,1478863684.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:04.038Z,1478863684.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:04.149Z,1478863684.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:04.175Z,1478863684.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:04.516Z,1478863684.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:04.544Z,1478863684.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:04.936Z,1478863684.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:05.001Z,1478863685.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:05.324Z,1478863685.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:05.381Z,1478863685.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:05.709Z,1478863685.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:05.746Z,1478863685.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:06.109Z,1478863686.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:06.157Z,1478863686.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:06.509Z,1478863686.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:06.545Z,1478863686.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:06.913Z,1478863686.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:06.965Z,1478863686.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:07.349Z,1478863687.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:07.400Z,1478863687.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:07.730Z,1478863687.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:07.761Z,1478863687.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:08.122Z,1478863688.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:08.137Z,1478863688.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:08.518Z,1478863688.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:08.541Z,1478863688.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:08.917Z,1478863688.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:08.942Z,1478863688.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:09.332Z,1478863689.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:09.347Z,1478863689.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:09.734Z,1478863689.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:09.748Z,1478863689.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:10.109Z,1478863690.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:10.137Z,1478863690.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:10.525Z,1478863690.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:10.544Z,1478863690.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:10.929Z,1478863690.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:10.949Z,1478863690.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:11.333Z,1478863691.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:11.373Z,1478863691.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:11.709Z,1478863691.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:11.745Z,1478863691.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:12.117Z,1478863692.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:12.145Z,1478863692.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:12.521Z,1478863692.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:12.549Z,1478863692.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:12.954Z,1478863692.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:12.970Z,1478863692.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:13.322Z,1478863693.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:13.350Z,1478863693.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:13.724Z,1478863693.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:13.758Z,1478863693.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:14.144Z,1478863694.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:14.162Z,1478863694.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:14.528Z,1478863694.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:14.557Z,1478863694.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:14.925Z,1478863694.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:14.958Z,1478863694.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:15.314Z,1478863695.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:15.341Z,1478863695.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:15.712Z,1478863695.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:15.745Z,1478863695.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:16.117Z,1478863696.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:16.137Z,1478863696.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:16.512Z,1478863696.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:16.545Z,1478863696.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:16.921Z,1478863696.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:16.937Z,1478863696.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:17.309Z,1478863697.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:17.341Z,1478863697.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:17.709Z,1478863697.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:17.745Z,1478863697.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:18.109Z,1478863698.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:18.153Z,1478863698.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:18.524Z,1478863698.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:18.562Z,1478863698.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:18.920Z,1478863698.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:18.944Z,1478863698.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:19.327Z,1478863699.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:19.389Z,1478863699.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:19.720Z,1478863699.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:19.749Z,1478863699.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:20.113Z,1478863700.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:20.135Z,1478863700.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:20.518Z,1478863700.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:20.533Z,1478863700.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:20.912Z,1478863700.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:20.945Z,1478863700.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:21.309Z,1478863701.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:21.336Z,1478863701.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:21.710Z,1478863701.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:21.741Z,1478863701.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:22.109Z,1478863702.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:22.136Z,1478863702.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:22.509Z,1478863702.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:22.526Z,1478863702.526 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:28:22.526Z,1478863702.526 [BPC1] Communications Fault, FailCount= 1
2016-11-11T11:28:22.526Z,1478863702.526 [BPC1](ERROR): Communications Fault
2016-11-11T11:28:22.549Z,1478863702.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:22.586Z,1478863702.586 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:28:22.916Z,1478863702.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:22.945Z,1478863702.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:23.309Z,1478863703.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:23.342Z,1478863703.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:23.736Z,1478863703.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:23.762Z,1478863703.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:23.825Z,1478863703.825 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:28:23.825Z,1478863703.825 [BPC1] No Fault, FailCount= 1
2016-11-11T11:28:24.160Z,1478863704.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:24.280Z,1478863704.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:24.539Z,1478863704.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:24.554Z,1478863704.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:24.933Z,1478863704.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:24.949Z,1478863704.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:25.314Z,1478863705.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:25.346Z,1478863705.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:25.717Z,1478863705.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:25.743Z,1478863705.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:26.109Z,1478863706.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:26.146Z,1478863706.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:26.510Z,1478863706.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:26.549Z,1478863706.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:26.917Z,1478863706.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:26.943Z,1478863706.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:27.317Z,1478863707.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:27.344Z,1478863707.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:27.742Z,1478863707.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:27.788Z,1478863707.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:28.118Z,1478863708.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:28.172Z,1478863708.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:28.521Z,1478863708.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:28.540Z,1478863708.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:28.936Z,1478863708.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:28.957Z,1478863708.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:29.352Z,1478863709.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:29.396Z,1478863709.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:29.740Z,1478863709.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:29.756Z,1478863709.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:30.133Z,1478863710.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:30.153Z,1478863710.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:30.513Z,1478863710.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:30.537Z,1478863710.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:30.913Z,1478863710.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:30.933Z,1478863710.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:31.318Z,1478863711.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:31.333Z,1478863711.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:31.715Z,1478863711.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:31.735Z,1478863711.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:32.112Z,1478863712.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:32.145Z,1478863712.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:32.518Z,1478863712.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:32.538Z,1478863712.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:32.913Z,1478863712.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:32.936Z,1478863712.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:33.312Z,1478863713.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:33.345Z,1478863713.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:33.718Z,1478863713.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:33.737Z,1478863713.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:34.131Z,1478863714.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:34.147Z,1478863714.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:34.524Z,1478863714.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:34.546Z,1478863714.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:34.924Z,1478863714.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:34.965Z,1478863714.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:35.320Z,1478863715.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:35.352Z,1478863715.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:35.713Z,1478863715.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:35.733Z,1478863715.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:36.114Z,1478863716.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:36.164Z,1478863716.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:36.517Z,1478863716.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:36.537Z,1478863716.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:36.912Z,1478863716.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:36.945Z,1478863716.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:37.316Z,1478863717.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:37.340Z,1478863717.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:37.712Z,1478863717.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:37.745Z,1478863717.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:38.112Z,1478863718.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:38.136Z,1478863718.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:38.510Z,1478863718.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:38.545Z,1478863718.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:38.909Z,1478863718.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:38.936Z,1478863718.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:39.331Z,1478863719.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:39.381Z,1478863719.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:39.729Z,1478863719.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:39.745Z,1478863719.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:40.132Z,1478863720.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:40.160Z,1478863720.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:40.550Z,1478863720.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:40.577Z,1478863720.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:40.926Z,1478863720.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:40.970Z,1478863720.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:41.318Z,1478863721.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:41.346Z,1478863721.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:41.716Z,1478863721.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:41.749Z,1478863721.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:42.122Z,1478863722.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:42.137Z,1478863722.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:42.520Z,1478863722.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:42.548Z,1478863722.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:42.909Z,1478863722.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:42.926Z,1478863722.926 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:28:42.926Z,1478863722.926 [BPC1] Communications Fault, FailCount= 2
2016-11-11T11:28:42.926Z,1478863722.926 [BPC1](ERROR): Communications Fault
2016-11-11T11:28:42.953Z,1478863722.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:42.995Z,1478863722.995 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:28:43.309Z,1478863723.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:43.350Z,1478863723.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:43.717Z,1478863723.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:43.749Z,1478863723.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:44.117Z,1478863724.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:44.149Z,1478863724.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:44.170Z,1478863724.170 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:28:44.170Z,1478863724.170 [BPC1] No Fault, FailCount= 2
2016-11-11T11:28:44.556Z,1478863724.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:44.710Z,1478863724.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:44.931Z,1478863724.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:44.992Z,1478863724.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:45.334Z,1478863725.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:45.354Z,1478863725.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:45.743Z,1478863725.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:45.765Z,1478863725.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:46.146Z,1478863726.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:46.170Z,1478863726.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:46.522Z,1478863726.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:46.557Z,1478863726.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:46.918Z,1478863726.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:46.933Z,1478863726.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:47.315Z,1478863727.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:47.343Z,1478863727.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:47.718Z,1478863727.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:47.733Z,1478863727.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:48.123Z,1478863728.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:48.138Z,1478863728.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:48.509Z,1478863728.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:48.541Z,1478863728.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:48.909Z,1478863728.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:48.926Z,1478863728.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:49.309Z,1478863729.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:49.330Z,1478863729.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:49.724Z,1478863729.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:49.745Z,1478863729.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:50.126Z,1478863730.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:50.149Z,1478863730.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:50.531Z,1478863730.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:50.553Z,1478863730.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:50.928Z,1478863730.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:50.945Z,1478863730.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:51.309Z,1478863731.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:51.346Z,1478863731.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:51.710Z,1478863731.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:51.746Z,1478863731.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:52.109Z,1478863732.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:52.145Z,1478863732.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:52.509Z,1478863732.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:52.536Z,1478863732.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:52.909Z,1478863732.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:52.945Z,1478863732.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:53.313Z,1478863733.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:53.349Z,1478863733.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:53.713Z,1478863733.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:53.733Z,1478863733.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:54.113Z,1478863734.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:54.133Z,1478863734.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:54.517Z,1478863734.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:54.537Z,1478863734.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:54.924Z,1478863734.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:54.940Z,1478863734.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:55.322Z,1478863735.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:55.345Z,1478863735.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:55.726Z,1478863735.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:55.784Z,1478863735.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:56.127Z,1478863736.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:56.142Z,1478863736.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:56.510Z,1478863736.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:56.542Z,1478863736.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:56.913Z,1478863736.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:56.940Z,1478863736.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:57.343Z,1478863737.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:57.401Z,1478863737.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:57.730Z,1478863737.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:57.764Z,1478863737.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:58.114Z,1478863738.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:58.161Z,1478863738.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:28:58.520Z,1478863738.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:28:58.561Z,1478863738.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:01.972Z,1478863741.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:01.987Z,1478863741.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:02.106Z,1478863742.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:02.145Z,1478863742.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:02.501Z,1478863742.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:02.532Z,1478863742.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:02.916Z,1478863742.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:02.962Z,1478863742.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:03.275Z,1478863743.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:03.301Z,1478863743.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:03.677Z,1478863743.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:03.695Z,1478863743.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:04.077Z,1478863744.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:04.098Z,1478863744.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:04.472Z,1478863744.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:04.497Z,1478863744.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:04.877Z,1478863744.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:04.908Z,1478863744.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:05.270Z,1478863745.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:05.309Z,1478863745.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:05.670Z,1478863745.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:05.708Z,1478863745.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:06.069Z,1478863746.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:06.109Z,1478863746.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:06.470Z,1478863746.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:06.516Z,1478863746.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:06.890Z,1478863746.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:06.913Z,1478863746.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:07.284Z,1478863747.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:07.317Z,1478863747.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:07.690Z,1478863747.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:07.728Z,1478863747.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:08.090Z,1478863748.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:08.122Z,1478863748.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:08.481Z,1478863748.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:08.498Z,1478863748.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:08.878Z,1478863748.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:08.909Z,1478863748.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:09.278Z,1478863749.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:09.337Z,1478863749.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:09.674Z,1478863749.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:09.713Z,1478863749.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:10.069Z,1478863750.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:10.109Z,1478863750.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:10.469Z,1478863750.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:10.533Z,1478863750.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:10.869Z,1478863750.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:10.909Z,1478863750.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:11.269Z,1478863751.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:11.291Z,1478863751.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:11.669Z,1478863751.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:11.721Z,1478863751.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:12.094Z,1478863752.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:12.110Z,1478863752.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:12.484Z,1478863752.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:12.534Z,1478863752.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:12.893Z,1478863752.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:12.945Z,1478863752.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:13.280Z,1478863753.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:13.298Z,1478863753.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:13.676Z,1478863753.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:13.697Z,1478863753.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:14.074Z,1478863754.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:14.125Z,1478863754.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:14.477Z,1478863754.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:14.525Z,1478863754.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:14.869Z,1478863754.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:14.913Z,1478863754.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:15.270Z,1478863755.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:15.294Z,1478863755.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:15.673Z,1478863755.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:15.704Z,1478863755.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:16.070Z,1478863756.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:16.105Z,1478863756.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:16.469Z,1478863756.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:16.501Z,1478863756.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:16.885Z,1478863756.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:16.922Z,1478863756.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:17.284Z,1478863757.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:17.315Z,1478863757.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:17.712Z,1478863757.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:17.766Z,1478863757.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:18.089Z,1478863758.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:18.124Z,1478863758.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:18.497Z,1478863758.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:18.522Z,1478863758.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:18.872Z,1478863758.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:18.921Z,1478863758.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:19.269Z,1478863759.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:19.338Z,1478863759.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:19.670Z,1478863759.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:19.705Z,1478863759.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:20.069Z,1478863760.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:20.105Z,1478863760.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:20.477Z,1478863760.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:20.519Z,1478863760.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:20.881Z,1478863760.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:20.899Z,1478863760.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:21.274Z,1478863761.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:21.301Z,1478863761.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:21.682Z,1478863761.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:21.700Z,1478863761.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:22.078Z,1478863762.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:22.100Z,1478863762.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:22.492Z,1478863762.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:22.521Z,1478863762.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:22.884Z,1478863762.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:22.913Z,1478863762.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:23.294Z,1478863763.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:23.314Z,1478863763.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:23.681Z,1478863763.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:23.737Z,1478863763.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:24.069Z,1478863764.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:24.096Z,1478863764.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:24.477Z,1478863764.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:24.501Z,1478863764.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:24.872Z,1478863764.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:24.935Z,1478863764.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:25.269Z,1478863765.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:25.309Z,1478863765.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:25.669Z,1478863765.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:25.713Z,1478863765.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:26.070Z,1478863766.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:26.110Z,1478863766.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:26.469Z,1478863766.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:26.508Z,1478863766.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:26.869Z,1478863766.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:26.922Z,1478863766.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:27.269Z,1478863767.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:27.314Z,1478863767.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:27.683Z,1478863767.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:27.718Z,1478863767.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:28.084Z,1478863768.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:28.126Z,1478863768.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:28.484Z,1478863768.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:28.560Z,1478863768.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:28.884Z,1478863768.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:28.906Z,1478863768.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:29.269Z,1478863769.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:29.298Z,1478863769.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:29.669Z,1478863769.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:29.705Z,1478863769.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:30.069Z,1478863770.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:30.111Z,1478863770.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:30.469Z,1478863770.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:30.616Z,1478863770.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:30.877Z,1478863770.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:30.905Z,1478863770.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:31.269Z,1478863771.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:31.303Z,1478863771.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:31.669Z,1478863771.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:31.705Z,1478863771.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:32.069Z,1478863772.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:32.106Z,1478863772.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:32.499Z,1478863772.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:32.588Z,1478863772.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:32.890Z,1478863772.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:32.921Z,1478863772.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:33.269Z,1478863773.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:33.292Z,1478863773.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:33.672Z,1478863773.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:33.721Z,1478863773.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:34.073Z,1478863774.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:34.126Z,1478863774.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:34.484Z,1478863774.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:34.542Z,1478863774.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:34.897Z,1478863774.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:34.939Z,1478863774.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:35.278Z,1478863775.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:35.315Z,1478863775.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:35.669Z,1478863775.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:35.720Z,1478863775.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:36.069Z,1478863776.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:36.124Z,1478863776.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:36.469Z,1478863776.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:36.513Z,1478863776.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:36.874Z,1478863776.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:36.893Z,1478863776.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:37.281Z,1478863777.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:37.328Z,1478863777.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:37.677Z,1478863777.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:37.694Z,1478863777.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:38.077Z,1478863778.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:38.097Z,1478863778.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:38.480Z,1478863778.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:38.533Z,1478863778.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:38.878Z,1478863778.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:38.895Z,1478863778.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:39.272Z,1478863779.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:39.308Z,1478863779.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:39.680Z,1478863779.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:39.698Z,1478863779.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:40.069Z,1478863780.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:40.123Z,1478863780.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:40.469Z,1478863780.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:40.519Z,1478863780.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:40.869Z,1478863780.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:40.922Z,1478863780.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:41.269Z,1478863781.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:41.312Z,1478863781.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:41.673Z,1478863781.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:41.726Z,1478863781.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:42.072Z,1478863782.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:42.156Z,1478863782.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:42.473Z,1478863782.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:42.572Z,1478863782.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:42.873Z,1478863782.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:42.897Z,1478863782.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:43.293Z,1478863783.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:43.310Z,1478863783.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:43.697Z,1478863783.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:43.727Z,1478863783.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:44.069Z,1478863784.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:44.106Z,1478863784.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:44.469Z,1478863784.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:44.545Z,1478863784.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:44.869Z,1478863784.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:44.906Z,1478863784.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:45.269Z,1478863785.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:45.312Z,1478863785.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:45.672Z,1478863785.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:45.718Z,1478863785.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:46.073Z,1478863786.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:46.111Z,1478863786.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:46.473Z,1478863786.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:46.517Z,1478863786.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:46.881Z,1478863786.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:46.918Z,1478863786.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:47.285Z,1478863787.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:47.342Z,1478863787.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:47.686Z,1478863787.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:47.732Z,1478863787.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:48.076Z,1478863788.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:48.095Z,1478863788.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:48.472Z,1478863788.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:48.514Z,1478863788.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:48.870Z,1478863788.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:48.907Z,1478863788.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:49.269Z,1478863789.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:49.317Z,1478863789.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:49.670Z,1478863789.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:49.709Z,1478863789.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:50.073Z,1478863790.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:50.123Z,1478863790.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:50.469Z,1478863790.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:50.520Z,1478863790.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:50.869Z,1478863790.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:50.934Z,1478863790.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:51.272Z,1478863791.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:51.312Z,1478863791.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:51.686Z,1478863791.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:51.733Z,1478863791.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:52.101Z,1478863792.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:52.134Z,1478863792.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:52.484Z,1478863792.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:52.557Z,1478863792.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:52.876Z,1478863792.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:52.907Z,1478863792.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:53.278Z,1478863793.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:53.314Z,1478863793.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:53.669Z,1478863793.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:53.717Z,1478863793.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:54.069Z,1478863794.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:54.149Z,1478863794.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:54.480Z,1478863794.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:54.567Z,1478863794.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:54.877Z,1478863794.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:54.946Z,1478863794.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:55.277Z,1478863795.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:55.285Z,1478863795.285 [PNI_TCM](ERROR): CRC does not match. Expected:0x61955 got:0x7361
2016-11-11T11:29:55.321Z,1478863795.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:55.673Z,1478863795.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:55.733Z,1478863795.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:56.084Z,1478863796.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:56.137Z,1478863796.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:56.500Z,1478863796.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:56.551Z,1478863796.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:56.895Z,1478863796.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:56.911Z,1478863796.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:57.284Z,1478863797.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:57.312Z,1478863797.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:57.669Z,1478863797.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:57.708Z,1478863797.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:58.070Z,1478863798.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:58.105Z,1478863798.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:58.492Z,1478863798.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:58.533Z,1478863798.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:29:58.880Z,1478863798.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:29:58.926Z,1478863798.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:02.244Z,1478863802.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:02.284Z,1478863802.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:02.361Z,1478863802.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:02.386Z,1478863802.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:02.756Z,1478863802.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:02.795Z,1478863802.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:03.148Z,1478863803.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:03.163Z,1478863803.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:03.544Z,1478863803.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:03.560Z,1478863803.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:03.940Z,1478863803.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:03.961Z,1478863803.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:04.342Z,1478863804.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:04.361Z,1478863804.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:04.744Z,1478863804.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:04.764Z,1478863804.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:05.149Z,1478863805.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:05.169Z,1478863805.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:05.534Z,1478863805.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:05.569Z,1478863805.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:05.938Z,1478863805.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:05.954Z,1478863805.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:06.338Z,1478863806.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:06.353Z,1478863806.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:06.737Z,1478863806.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:06.789Z,1478863806.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:07.148Z,1478863807.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:07.190Z,1478863807.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:07.556Z,1478863807.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:07.588Z,1478863807.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:07.951Z,1478863807.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:07.973Z,1478863807.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:08.349Z,1478863808.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:08.401Z,1478863808.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:08.733Z,1478863808.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:08.767Z,1478863808.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:09.138Z,1478863809.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:09.199Z,1478863809.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:09.534Z,1478863809.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:09.565Z,1478863809.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:09.933Z,1478863809.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:09.985Z,1478863809.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:10.334Z,1478863810.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:10.374Z,1478863810.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:10.733Z,1478863810.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:10.764Z,1478863810.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:11.133Z,1478863811.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:11.169Z,1478863811.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:11.538Z,1478863811.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:11.573Z,1478863811.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:11.933Z,1478863811.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:11.969Z,1478863811.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:12.356Z,1478863812.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:12.378Z,1478863812.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:12.744Z,1478863812.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:12.781Z,1478863812.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:13.148Z,1478863813.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:13.182Z,1478863813.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:13.562Z,1478863813.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:13.577Z,1478863813.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:13.934Z,1478863813.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:13.950Z,1478863813.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:14.334Z,1478863814.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:14.358Z,1478863814.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:14.745Z,1478863814.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:14.765Z,1478863814.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:15.140Z,1478863815.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:15.160Z,1478863815.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:15.536Z,1478863815.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:15.564Z,1478863815.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:15.941Z,1478863815.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:15.961Z,1478863815.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:16.344Z,1478863816.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:16.365Z,1478863816.365 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:16.365Z,1478863816.365 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 114
2016-11-11T11:30:16.365Z,1478863816.365 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:30:16.372Z,1478863816.372 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:16.372Z,1478863816.372 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 114
2016-11-11T11:30:16.372Z,1478863816.372 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:30:16.374Z,1478863816.374 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:16.374Z,1478863816.374 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 114
2016-11-11T11:30:16.374Z,1478863816.374 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:30:16.405Z,1478863816.405 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:30:16.405Z,1478863816.405 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:30:16.405Z,1478863816.405 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:30:16.733Z,1478863816.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:16.776Z,1478863816.776 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:30:16.776Z,1478863816.776 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 114
2016-11-11T11:30:16.776Z,1478863816.776 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:30:16.776Z,1478863816.776 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 114
2016-11-11T11:30:16.777Z,1478863816.777 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:30:16.777Z,1478863816.777 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 114
2016-11-11T11:30:17.133Z,1478863817.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:17.172Z,1478863817.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:30:17.172Z,1478863817.172 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:30:17.173Z,1478863817.173 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:30:17.177Z,1478863817.177 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:30:17.178Z,1478863817.178 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:30:17.178Z,1478863817.178 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:30:17.179Z,1478863817.179 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:30:17.179Z,1478863817.179 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:30:17.179Z,1478863817.180 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:30:17.548Z,1478863817.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:17.585Z,1478863817.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:17.944Z,1478863817.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:17.974Z,1478863817.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:18.348Z,1478863818.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:18.385Z,1478863818.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:18.748Z,1478863818.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:18.764Z,1478863818.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:19.141Z,1478863819.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:19.156Z,1478863819.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:19.540Z,1478863819.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:19.555Z,1478863819.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:19.949Z,1478863819.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:19.969Z,1478863819.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:20.340Z,1478863820.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:20.356Z,1478863820.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:20.749Z,1478863820.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:20.805Z,1478863820.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:21.143Z,1478863821.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:21.165Z,1478863821.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:21.544Z,1478863821.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:21.563Z,1478863821.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:21.933Z,1478863821.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:21.965Z,1478863821.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:22.334Z,1478863822.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:22.371Z,1478863822.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:22.752Z,1478863822.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:22.774Z,1478863822.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:23.151Z,1478863823.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:23.167Z,1478863823.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:23.559Z,1478863823.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:23.609Z,1478863823.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:23.952Z,1478863823.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:23.967Z,1478863823.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:24.333Z,1478863824.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:24.382Z,1478863824.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:24.746Z,1478863824.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:24.805Z,1478863824.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:25.137Z,1478863825.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:25.161Z,1478863825.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:25.540Z,1478863825.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:25.565Z,1478863825.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:25.942Z,1478863825.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:25.965Z,1478863825.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:26.337Z,1478863826.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:26.365Z,1478863826.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:26.743Z,1478863826.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:26.770Z,1478863826.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:27.134Z,1478863827.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:27.175Z,1478863827.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:27.533Z,1478863827.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:27.550Z,1478863827.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:27.948Z,1478863827.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:27.981Z,1478863827.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:28.348Z,1478863828.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:28.370Z,1478863828.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:28.756Z,1478863828.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:28.781Z,1478863828.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:29.156Z,1478863829.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:29.181Z,1478863829.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:29.537Z,1478863829.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:29.552Z,1478863829.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:29.937Z,1478863829.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:29.956Z,1478863829.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:30.340Z,1478863830.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:30.355Z,1478863830.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:30.741Z,1478863830.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:30.761Z,1478863830.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:31.136Z,1478863831.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:31.168Z,1478863831.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:31.544Z,1478863831.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:31.559Z,1478863831.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:31.772Z,1478863831.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:31.934Z,1478863831.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:31.968Z,1478863831.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:32.333Z,1478863832.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:32.366Z,1478863832.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:32.568Z,1478863832.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:32.738Z,1478863832.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:32.769Z,1478863832.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:33.162Z,1478863833.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:33.185Z,1478863833.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:33.316Z,1478863833.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:33.548Z,1478863833.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:33.574Z,1478863833.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:33.956Z,1478863833.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:33.981Z,1478863833.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:34.112Z,1478863834.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:34.360Z,1478863834.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:34.387Z,1478863834.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:34.733Z,1478863834.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:34.773Z,1478863834.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:34.909Z,1478863834.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:35.142Z,1478863835.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:35.177Z,1478863835.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:35.320Z,1478863835.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:35.542Z,1478863835.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:35.605Z,1478863835.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:35.937Z,1478863835.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:35.965Z,1478863835.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:36.340Z,1478863836.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:36.361Z,1478863836.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:36.737Z,1478863836.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:36.773Z,1478863836.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:37.141Z,1478863837.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:37.186Z,1478863837.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:37.541Z,1478863837.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:37.561Z,1478863837.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:37.940Z,1478863837.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:37.955Z,1478863837.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:38.348Z,1478863838.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:38.393Z,1478863838.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:38.751Z,1478863838.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:38.766Z,1478863838.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:39.156Z,1478863839.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:39.203Z,1478863839.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:39.551Z,1478863839.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:39.567Z,1478863839.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:39.938Z,1478863839.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:40.009Z,1478863840.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:40.334Z,1478863840.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:40.366Z,1478863840.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:40.745Z,1478863840.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:40.765Z,1478863840.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:41.141Z,1478863841.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:41.161Z,1478863841.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:41.540Z,1478863841.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:41.564Z,1478863841.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:41.938Z,1478863841.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:41.959Z,1478863841.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:42.341Z,1478863842.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:42.361Z,1478863842.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:42.733Z,1478863842.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:42.770Z,1478863842.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:43.133Z,1478863843.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:43.169Z,1478863843.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:43.556Z,1478863843.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:43.572Z,1478863843.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:43.957Z,1478863843.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:43.972Z,1478863843.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:44.348Z,1478863844.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:44.385Z,1478863844.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:44.762Z,1478863844.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:44.778Z,1478863844.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:45.140Z,1478863845.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:45.172Z,1478863845.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:45.538Z,1478863845.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:45.558Z,1478863845.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:45.736Z,1478863845.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:45.933Z,1478863845.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:45.961Z,1478863845.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:46.342Z,1478863846.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:46.357Z,1478863846.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:46.532Z,1478863846.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:46.742Z,1478863846.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:46.767Z,1478863846.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:47.142Z,1478863847.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:47.167Z,1478863847.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:47.296Z,1478863847.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:47.534Z,1478863847.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:47.569Z,1478863847.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:47.937Z,1478863847.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:47.957Z,1478863847.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:48.092Z,1478863848.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:48.341Z,1478863848.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:48.357Z,1478863848.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:48.748Z,1478863848.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:48.763Z,1478863848.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:48.892Z,1478863848.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:49.156Z,1478863849.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:49.172Z,1478863849.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:49.304Z,1478863849.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:49.549Z,1478863849.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:49.569Z,1478863849.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:49.955Z,1478863849.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:49.970Z,1478863849.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:50.333Z,1478863850.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:50.365Z,1478863850.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:50.733Z,1478863850.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:50.807Z,1478863850.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:51.138Z,1478863851.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:51.181Z,1478863851.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:51.538Z,1478863851.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:51.573Z,1478863851.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:51.945Z,1478863851.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:52.013Z,1478863852.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:52.341Z,1478863852.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:52.356Z,1478863852.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:52.742Z,1478863852.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:52.792Z,1478863852.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:53.141Z,1478863853.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:53.175Z,1478863853.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:53.540Z,1478863853.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:53.582Z,1478863853.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:53.952Z,1478863853.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:54.024Z,1478863854.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:54.352Z,1478863854.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:54.376Z,1478863854.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:54.733Z,1478863854.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:54.753Z,1478863854.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:55.141Z,1478863855.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:55.161Z,1478863855.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:55.545Z,1478863855.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:55.565Z,1478863855.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:55.945Z,1478863855.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:55.965Z,1478863855.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:56.345Z,1478863856.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:56.361Z,1478863856.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:56.749Z,1478863856.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:56.775Z,1478863856.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:57.133Z,1478863857.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:57.165Z,1478863857.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:57.533Z,1478863857.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:57.559Z,1478863857.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:57.959Z,1478863857.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:57.975Z,1478863857.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:58.356Z,1478863858.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:58.370Z,1478863858.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:58.742Z,1478863858.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:58.767Z,1478863858.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:59.142Z,1478863859.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:30:59.168Z,1478863859.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:30:59.716Z,1478863859.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:00.512Z,1478863860.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:02.536Z,1478863862.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:02.568Z,1478863862.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:02.669Z,1478863862.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:02.697Z,1478863862.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:03.029Z,1478863863.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:03.045Z,1478863863.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:03.424Z,1478863863.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:03.445Z,1478863863.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:03.825Z,1478863863.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:03.853Z,1478863863.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:04.217Z,1478863864.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:04.253Z,1478863864.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:04.617Z,1478863864.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:04.654Z,1478863864.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:05.022Z,1478863865.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:05.047Z,1478863865.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:05.417Z,1478863865.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:05.453Z,1478863865.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:05.817Z,1478863865.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:05.873Z,1478863865.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:06.217Z,1478863866.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:06.255Z,1478863866.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:06.654Z,1478863866.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:06.669Z,1478863866.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:07.032Z,1478863867.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:07.081Z,1478863867.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:07.421Z,1478863867.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:07.441Z,1478863867.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:07.825Z,1478863867.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:07.881Z,1478863867.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:08.225Z,1478863868.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:08.240Z,1478863868.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:08.624Z,1478863868.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:08.679Z,1478863868.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:09.031Z,1478863869.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:09.047Z,1478863869.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:09.425Z,1478863869.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:09.445Z,1478863869.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:09.820Z,1478863869.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:09.853Z,1478863869.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:10.224Z,1478863870.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:10.245Z,1478863870.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:10.625Z,1478863870.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:10.645Z,1478863870.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:11.036Z,1478863871.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:11.064Z,1478863871.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:11.434Z,1478863871.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:11.457Z,1478863871.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:11.817Z,1478863871.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:11.850Z,1478863871.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:12.217Z,1478863872.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:12.245Z,1478863872.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:12.629Z,1478863872.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:12.668Z,1478863872.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:13.017Z,1478863873.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:13.061Z,1478863873.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:13.417Z,1478863873.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:13.457Z,1478863873.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:13.817Z,1478863873.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:13.837Z,1478863873.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:14.221Z,1478863874.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:14.241Z,1478863874.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:14.621Z,1478863874.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:14.636Z,1478863874.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:15.017Z,1478863875.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:15.041Z,1478863875.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:15.436Z,1478863875.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:15.451Z,1478863875.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:15.836Z,1478863875.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:15.852Z,1478863875.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:16.227Z,1478863876.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:16.242Z,1478863876.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:16.624Z,1478863876.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:16.649Z,1478863876.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:17.033Z,1478863877.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:17.053Z,1478863877.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:17.421Z,1478863877.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:17.443Z,1478863877.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:17.830Z,1478863877.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:17.845Z,1478863877.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:18.221Z,1478863878.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:18.243Z,1478863878.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:18.633Z,1478863878.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:18.648Z,1478863878.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:19.030Z,1478863879.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:19.045Z,1478863879.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:19.417Z,1478863879.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:19.450Z,1478863879.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:19.817Z,1478863879.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:19.851Z,1478863879.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:20.217Z,1478863880.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:20.249Z,1478863880.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:20.633Z,1478863880.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:20.725Z,1478863880.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:21.029Z,1478863881.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:21.045Z,1478863881.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:21.424Z,1478863881.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:21.472Z,1478863881.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:21.825Z,1478863881.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:21.845Z,1478863881.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:22.225Z,1478863882.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:22.281Z,1478863882.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:22.617Z,1478863882.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:22.666Z,1478863882.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:23.017Z,1478863883.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:23.049Z,1478863883.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:23.421Z,1478863883.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:23.453Z,1478863883.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:23.837Z,1478863883.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:23.865Z,1478863883.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:24.240Z,1478863884.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:24.265Z,1478863884.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:24.629Z,1478863884.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:24.650Z,1478863884.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:25.017Z,1478863885.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:25.052Z,1478863885.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:25.425Z,1478863885.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:25.447Z,1478863885.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:25.825Z,1478863885.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:25.847Z,1478863885.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:26.217Z,1478863886.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:26.243Z,1478863886.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:26.632Z,1478863886.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:26.651Z,1478863886.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:27.021Z,1478863887.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:27.053Z,1478863887.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:27.417Z,1478863887.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:27.452Z,1478863887.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:27.817Z,1478863887.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:27.843Z,1478863887.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:28.243Z,1478863888.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:28.259Z,1478863888.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:28.648Z,1478863888.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:28.664Z,1478863888.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:29.025Z,1478863889.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:29.051Z,1478863889.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:29.421Z,1478863889.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:29.449Z,1478863889.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:29.818Z,1478863889.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:29.861Z,1478863889.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:30.217Z,1478863890.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:30.257Z,1478863890.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:30.617Z,1478863890.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:30.637Z,1478863890.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:31.018Z,1478863891.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:31.045Z,1478863891.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:31.420Z,1478863891.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:31.448Z,1478863891.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:31.817Z,1478863891.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:31.850Z,1478863891.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:32.218Z,1478863892.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:32.249Z,1478863892.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:32.632Z,1478863892.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:32.659Z,1478863892.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:33.028Z,1478863893.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:33.064Z,1478863893.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:33.447Z,1478863893.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:33.462Z,1478863893.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:33.828Z,1478863893.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:33.848Z,1478863893.848 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T11:31:33.848Z,1478863893.848 [BPC1] Data Fault, FailCount= 1
2016-11-11T11:31:33.848Z,1478863893.848 [BPC1](ERROR): Data Fault
2016-11-11T11:31:33.877Z,1478863893.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:33.914Z,1478863893.914 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T11:31:34.222Z,1478863894.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:34.257Z,1478863894.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:34.617Z,1478863894.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:34.641Z,1478863894.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:35.025Z,1478863895.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:35.041Z,1478863895.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:35.073Z,1478863895.073 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:31:35.073Z,1478863895.073 [BPC1] No Fault, FailCount= 1
2016-11-11T11:31:35.424Z,1478863895.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:35.518Z,1478863895.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:35.826Z,1478863895.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:35.841Z,1478863895.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:36.220Z,1478863896.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:36.271Z,1478863896.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:36.625Z,1478863896.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:36.658Z,1478863896.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:37.017Z,1478863897.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:37.064Z,1478863897.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:37.417Z,1478863897.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:37.458Z,1478863897.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:37.831Z,1478863897.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:37.867Z,1478863897.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:38.232Z,1478863898.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:38.268Z,1478863898.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:38.632Z,1478863898.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:38.660Z,1478863898.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:39.036Z,1478863899.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:39.071Z,1478863899.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:39.426Z,1478863899.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:39.440Z,1478863899.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:39.825Z,1478863899.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:39.849Z,1478863899.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:40.224Z,1478863900.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:40.240Z,1478863900.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:40.625Z,1478863900.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:40.645Z,1478863900.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:41.018Z,1478863901.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:41.053Z,1478863901.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:41.425Z,1478863901.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:41.447Z,1478863901.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:41.817Z,1478863901.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:41.852Z,1478863901.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:42.217Z,1478863902.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:42.243Z,1478863902.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:42.632Z,1478863902.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:42.653Z,1478863902.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:43.049Z,1478863903.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:43.065Z,1478863903.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:43.428Z,1478863903.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:43.461Z,1478863903.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:43.832Z,1478863903.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:43.870Z,1478863903.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:44.232Z,1478863904.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:44.258Z,1478863904.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:44.617Z,1478863904.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:44.637Z,1478863904.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:45.029Z,1478863905.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:45.069Z,1478863905.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:45.422Z,1478863905.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:45.441Z,1478863905.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:45.824Z,1478863905.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:45.839Z,1478863905.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:46.228Z,1478863906.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:46.243Z,1478863906.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:46.626Z,1478863906.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:46.653Z,1478863906.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:47.020Z,1478863907.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:47.036Z,1478863907.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:47.425Z,1478863907.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:47.445Z,1478863907.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:47.821Z,1478863907.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:47.836Z,1478863907.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:48.232Z,1478863908.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:48.380Z,1478863908.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:48.636Z,1478863908.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:48.668Z,1478863908.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:49.032Z,1478863909.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:49.072Z,1478863909.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:49.428Z,1478863909.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:49.443Z,1478863909.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:49.827Z,1478863909.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:49.880Z,1478863909.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:50.226Z,1478863910.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:50.276Z,1478863910.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:50.620Z,1478863910.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:50.652Z,1478863910.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:51.029Z,1478863911.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:51.049Z,1478863911.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:51.417Z,1478863911.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:51.452Z,1478863911.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:51.817Z,1478863911.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:51.849Z,1478863911.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:52.225Z,1478863912.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:52.247Z,1478863912.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:52.617Z,1478863912.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:52.654Z,1478863912.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:53.017Z,1478863913.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:53.053Z,1478863913.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:53.441Z,1478863913.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:53.461Z,1478863913.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:53.832Z,1478863913.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:53.858Z,1478863913.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:54.236Z,1478863914.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:54.259Z,1478863914.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:54.628Z,1478863914.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:54.660Z,1478863914.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:55.025Z,1478863915.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:55.040Z,1478863915.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:55.423Z,1478863915.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:55.447Z,1478863915.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:55.834Z,1478863915.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:55.858Z,1478863915.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:56.224Z,1478863916.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:56.255Z,1478863916.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:56.629Z,1478863916.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:56.649Z,1478863916.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:57.032Z,1478863917.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:57.048Z,1478863917.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:57.417Z,1478863917.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:57.451Z,1478863917.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:57.821Z,1478863917.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:57.857Z,1478863917.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:57.879Z,1478863917.879 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T11:26:57.9Z
2016-11-11T11:31:57.879Z,1478863917.879 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T11:31:57.880Z,1478863917.880 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T11:31:58.244Z,1478863918.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:58.260Z,1478863918.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:59.168Z,1478863919.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:59.204Z,1478863919.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:31:59.326Z,1478863919.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:31:59.366Z,1478863919.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:02.915Z,1478863922.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:02.985Z,1478863922.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:03.047Z,1478863923.047 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0156.lzma
2016-11-11T11:32:03.100Z,1478863923.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:03.129Z,1478863923.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:03.464Z,1478863923.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:03.500Z,1478863923.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:03.837Z,1478863923.837 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0156.lzma.bak
2016-11-11T11:32:03.837Z,1478863923.837 [DataOverHttps](INFO): SBD MOMSN=4555363
2016-11-11T11:32:03.871Z,1478863923.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:03.922Z,1478863923.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:06.241Z,1478863926.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:06.317Z,1478863926.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:06.417Z,1478863926.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:06.461Z,1478863926.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:09.764Z,1478863929.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:09.818Z,1478863929.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:09.932Z,1478863929.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:09.956Z,1478863929.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:10.309Z,1478863930.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:10.329Z,1478863930.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:10.701Z,1478863930.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:10.776Z,1478863930.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:11.093Z,1478863931.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:11.125Z,1478863931.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:11.496Z,1478863931.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:11.529Z,1478863931.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:15.126Z,1478863935.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:15.142Z,1478863935.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:15.205Z,1478863935.205 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20161111T044527/Express0157.lzma
2016-11-11T11:32:15.254Z,1478863935.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:15.304Z,1478863935.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:15.624Z,1478863935.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:15.645Z,1478863935.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:35.135Z,1478863955.135 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0157.lzma.bak
2016-11-11T11:32:35.135Z,1478863955.135 [DataOverHttps](INFO): SBD MOMSN=4555365
2016-11-11T11:32:35.145Z,1478863955.145 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T11:32:35.166Z,1478863955.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:35.177Z,1478863955.177 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:32:35.177Z,1478863955.177 [BPC1] Communications Fault, FailCount= 1
2016-11-11T11:32:35.177Z,1478863955.177 [BPC1](ERROR): Communications Fault
2016-11-11T11:32:35.207Z,1478863955.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:35.257Z,1478863955.257 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:32:37.968Z,1478863957.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:38.013Z,1478863958.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:38.051Z,1478863958.051 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T11:32:38.051Z,1478863958.051 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T11:32:38.051Z,1478863958.051 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T11:32:38.154Z,1478863958.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:38.213Z,1478863958.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:43.547Z,1478863963.547 [NAL9602](INFO): Powering down
2016-11-11T11:32:43.589Z,1478863963.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:43.605Z,1478863963.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:43.667Z,1478863963.667 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:32:43.667Z,1478863963.667 [BPC1] No Fault, FailCount= 1
2016-11-11T11:32:43.737Z,1478863963.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:43.837Z,1478863963.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:44.141Z,1478863964.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:44.242Z,1478863964.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:44.577Z,1478863964.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:44.629Z,1478863964.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:44.918Z,1478863964.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:44.956Z,1478863964.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:45.313Z,1478863965.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:45.365Z,1478863965.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:45.728Z,1478863965.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:45.743Z,1478863965.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:46.120Z,1478863966.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:46.137Z,1478863966.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:46.517Z,1478863966.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:46.590Z,1478863966.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:46.915Z,1478863966.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:46.971Z,1478863966.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:47.311Z,1478863967.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:47.331Z,1478863967.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:47.717Z,1478863967.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:47.745Z,1478863967.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:48.126Z,1478863968.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:48.157Z,1478863968.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:48.558Z,1478863968.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:48.593Z,1478863968.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:48.908Z,1478863968.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:48.946Z,1478863968.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:49.319Z,1478863969.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:49.386Z,1478863969.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:49.726Z,1478863969.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:49.764Z,1478863969.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:50.138Z,1478863970.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:50.170Z,1478863970.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:50.513Z,1478863970.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:50.542Z,1478863970.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:50.915Z,1478863970.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:50.955Z,1478863970.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:51.330Z,1478863971.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:51.387Z,1478863971.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:51.713Z,1478863971.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:51.753Z,1478863971.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:52.115Z,1478863972.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:52.155Z,1478863972.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:52.523Z,1478863972.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:52.559Z,1478863972.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:52.913Z,1478863972.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:52.957Z,1478863972.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:53.311Z,1478863973.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:53.331Z,1478863973.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:53.718Z,1478863973.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:53.763Z,1478863973.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:54.114Z,1478863974.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:54.146Z,1478863974.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:54.521Z,1478863974.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:54.545Z,1478863974.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:54.913Z,1478863974.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:54.961Z,1478863974.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:55.311Z,1478863975.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:55.359Z,1478863975.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:55.714Z,1478863975.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:55.762Z,1478863975.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:56.118Z,1478863976.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:56.141Z,1478863976.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:56.514Z,1478863976.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:56.605Z,1478863976.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:56.920Z,1478863976.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:56.946Z,1478863976.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:57.311Z,1478863977.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:57.385Z,1478863977.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:57.709Z,1478863977.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:57.741Z,1478863977.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:58.119Z,1478863978.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:58.235Z,1478863978.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:58.518Z,1478863978.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:58.563Z,1478863978.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:58.910Z,1478863978.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:58.957Z,1478863978.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:59.309Z,1478863979.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:59.342Z,1478863979.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:32:59.709Z,1478863979.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:32:59.741Z,1478863979.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:00.108Z,1478863980.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:00.153Z,1478863980.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:00.513Z,1478863980.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:00.528Z,1478863980.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:00.917Z,1478863980.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:00.937Z,1478863980.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:01.344Z,1478863981.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:01.379Z,1478863981.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:01.722Z,1478863981.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:01.741Z,1478863981.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:02.120Z,1478863982.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:02.135Z,1478863982.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:02.513Z,1478863982.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:02.549Z,1478863982.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:02.913Z,1478863982.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:02.945Z,1478863982.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:03.317Z,1478863983.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:03.344Z,1478863983.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:03.717Z,1478863983.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:03.737Z,1478863983.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:04.113Z,1478863984.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:04.128Z,1478863984.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:04.533Z,1478863984.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:04.564Z,1478863984.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:04.925Z,1478863984.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:04.945Z,1478863984.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:05.344Z,1478863985.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:05.392Z,1478863985.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:05.709Z,1478863985.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:05.741Z,1478863985.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:06.120Z,1478863986.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:06.151Z,1478863986.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:06.529Z,1478863986.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:06.549Z,1478863986.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:06.947Z,1478863986.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:06.981Z,1478863986.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:07.317Z,1478863987.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:07.350Z,1478863987.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:07.712Z,1478863987.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:07.738Z,1478863987.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:08.120Z,1478863988.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:08.141Z,1478863988.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:08.516Z,1478863988.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:08.532Z,1478863988.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:08.920Z,1478863988.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:08.936Z,1478863988.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:09.309Z,1478863989.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:09.343Z,1478863989.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:09.709Z,1478863989.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:09.742Z,1478863989.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:10.109Z,1478863990.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:10.166Z,1478863990.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:10.509Z,1478863990.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:10.586Z,1478863990.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:10.911Z,1478863990.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:10.943Z,1478863990.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:11.316Z,1478863991.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:11.332Z,1478863991.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:11.716Z,1478863991.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:11.754Z,1478863991.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:12.116Z,1478863992.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:12.161Z,1478863992.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:12.517Z,1478863992.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:12.575Z,1478863992.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:12.916Z,1478863992.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:12.973Z,1478863992.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:13.317Z,1478863993.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:13.335Z,1478863993.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:13.712Z,1478863993.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:13.735Z,1478863993.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:14.112Z,1478863994.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:14.137Z,1478863994.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:14.509Z,1478863994.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:14.542Z,1478863994.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:14.909Z,1478863994.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:14.945Z,1478863994.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:15.309Z,1478863995.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:15.341Z,1478863995.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:15.710Z,1478863995.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:15.751Z,1478863995.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:16.109Z,1478863996.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:16.168Z,1478863996.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:16.509Z,1478863996.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:16.529Z,1478863996.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:16.914Z,1478863996.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:16.945Z,1478863996.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:17.318Z,1478863997.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:17.333Z,1478863997.333 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:17.333Z,1478863997.333 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 115
2016-11-11T11:33:17.333Z,1478863997.333 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:33:17.340Z,1478863997.340 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:17.340Z,1478863997.340 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 115
2016-11-11T11:33:17.340Z,1478863997.341 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:33:17.343Z,1478863997.342 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:17.343Z,1478863997.343 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 115
2016-11-11T11:33:17.343Z,1478863997.343 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:33:17.378Z,1478863997.378 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:33:17.379Z,1478863997.379 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:33:17.387Z,1478863997.387 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:33:17.714Z,1478863997.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:17.786Z,1478863997.786 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:33:17.786Z,1478863997.786 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 115
2016-11-11T11:33:17.787Z,1478863997.787 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:33:17.787Z,1478863997.787 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 115
2016-11-11T11:33:17.788Z,1478863997.787 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:33:17.788Z,1478863997.788 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 115
2016-11-11T11:33:18.144Z,1478863998.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:18.174Z,1478863998.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:33:18.175Z,1478863998.174 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:33:18.183Z,1478863998.183 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:33:18.195Z,1478863998.195 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:33:18.196Z,1478863998.196 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:33:18.196Z,1478863998.196 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:33:18.197Z,1478863998.197 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:33:18.197Z,1478863998.197 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:33:18.197Z,1478863998.197 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:33:18.510Z,1478863998.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:18.553Z,1478863998.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:18.909Z,1478863998.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:18.926Z,1478863998.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:19.312Z,1478863999.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:19.328Z,1478863999.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:19.712Z,1478863999.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:19.731Z,1478863999.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:20.115Z,1478864000.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:20.138Z,1478864000.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:20.516Z,1478864000.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:20.538Z,1478864000.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:20.909Z,1478864000.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:20.950Z,1478864000.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:21.313Z,1478864001.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:21.358Z,1478864001.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:21.709Z,1478864001.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:21.729Z,1478864001.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:22.114Z,1478864002.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:22.133Z,1478864002.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:22.514Z,1478864002.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:22.529Z,1478864002.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:22.927Z,1478864002.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:22.944Z,1478864002.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:23.317Z,1478864003.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:23.364Z,1478864003.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:23.709Z,1478864003.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:23.753Z,1478864003.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:24.109Z,1478864004.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:24.185Z,1478864004.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:24.516Z,1478864004.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:24.535Z,1478864004.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:24.909Z,1478864004.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:24.973Z,1478864004.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:25.309Z,1478864005.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:25.373Z,1478864005.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:25.716Z,1478864005.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:25.736Z,1478864005.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:26.117Z,1478864006.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:26.171Z,1478864006.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:26.509Z,1478864006.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:26.567Z,1478864006.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:26.909Z,1478864006.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:26.945Z,1478864006.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:27.309Z,1478864007.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:27.358Z,1478864007.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:27.709Z,1478864007.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:27.746Z,1478864007.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:28.109Z,1478864008.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:28.194Z,1478864008.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:28.516Z,1478864008.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:28.555Z,1478864008.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:28.914Z,1478864008.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:28.962Z,1478864008.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:29.321Z,1478864009.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:29.337Z,1478864009.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:29.720Z,1478864009.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:29.750Z,1478864009.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:30.109Z,1478864010.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:30.205Z,1478864010.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:30.522Z,1478864010.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:30.539Z,1478864010.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:30.919Z,1478864010.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:30.935Z,1478864010.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:31.316Z,1478864011.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:31.346Z,1478864011.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:31.716Z,1478864011.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:31.736Z,1478864011.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:32.109Z,1478864012.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:32.146Z,1478864012.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:32.510Z,1478864012.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:32.537Z,1478864012.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:32.909Z,1478864012.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:32.950Z,1478864012.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:33.324Z,1478864013.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:33.342Z,1478864013.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:33.452Z,1478864013.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:33.709Z,1478864013.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:33.738Z,1478864013.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:34.111Z,1478864014.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:34.126Z,1478864014.126 [PNI_TCM](ERROR): CRC does not match. Expected:0x60081 got:0x41635
2016-11-11T11:33:34.157Z,1478864014.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:34.248Z,1478864014.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:34.509Z,1478864014.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:34.544Z,1478864014.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:34.909Z,1478864014.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:34.947Z,1478864014.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:35.323Z,1478864015.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:35.338Z,1478864015.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:35.716Z,1478864015.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:35.745Z,1478864015.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:36.108Z,1478864016.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:36.143Z,1478864016.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:36.513Z,1478864016.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:36.547Z,1478864016.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:36.910Z,1478864016.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:36.940Z,1478864016.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:37.311Z,1478864017.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:37.326Z,1478864017.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:37.715Z,1478864017.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:37.757Z,1478864017.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:38.133Z,1478864018.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:38.197Z,1478864018.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:38.515Z,1478864018.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:38.538Z,1478864018.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:42.207Z,1478864022.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:42.309Z,1478864022.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:42.408Z,1478864022.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:42.437Z,1478864022.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:42.791Z,1478864022.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:42.845Z,1478864022.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:43.195Z,1478864023.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:43.210Z,1478864023.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:43.592Z,1478864023.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:43.635Z,1478864023.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:43.992Z,1478864023.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:44.043Z,1478864024.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:44.386Z,1478864024.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:44.421Z,1478864024.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:44.785Z,1478864024.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:44.821Z,1478864024.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:45.185Z,1478864025.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:45.221Z,1478864025.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:45.585Z,1478864025.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:45.614Z,1478864025.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:45.985Z,1478864025.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:46.001Z,1478864026.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:46.393Z,1478864026.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:46.426Z,1478864026.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:46.785Z,1478864026.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:46.801Z,1478864026.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:47.185Z,1478864027.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:47.217Z,1478864027.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:47.440Z,1478864027.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:47.592Z,1478864027.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:47.607Z,1478864027.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:47.992Z,1478864027.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:48.008Z,1478864028.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:48.236Z,1478864028.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:48.397Z,1478864028.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:48.412Z,1478864028.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:48.791Z,1478864028.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:48.814Z,1478864028.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:49.192Z,1478864029.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:49.208Z,1478864029.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:49.585Z,1478864029.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:49.618Z,1478864029.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:49.992Z,1478864029.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:50.015Z,1478864030.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:50.385Z,1478864030.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:50.415Z,1478864030.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:50.785Z,1478864030.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:50.818Z,1478864030.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:51.185Z,1478864031.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:51.217Z,1478864031.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:51.585Z,1478864031.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:51.617Z,1478864031.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:51.985Z,1478864031.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:52.019Z,1478864032.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:52.393Z,1478864032.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:52.425Z,1478864032.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:52.785Z,1478864032.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:52.813Z,1478864032.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:53.185Z,1478864033.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:53.225Z,1478864033.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:53.588Z,1478864033.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:53.625Z,1478864033.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:53.990Z,1478864033.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:54.006Z,1478864034.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:54.393Z,1478864034.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:54.409Z,1478864034.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:54.791Z,1478864034.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:54.813Z,1478864034.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:55.197Z,1478864035.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:55.212Z,1478864035.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:55.588Z,1478864035.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:55.611Z,1478864035.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:55.992Z,1478864035.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:56.102Z,1478864036.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:56.396Z,1478864036.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:56.412Z,1478864036.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:56.792Z,1478864036.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:56.845Z,1478864036.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:57.189Z,1478864037.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:57.204Z,1478864037.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:57.591Z,1478864037.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:57.644Z,1478864037.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:57.991Z,1478864037.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:58.045Z,1478864038.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:58.385Z,1478864038.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:58.417Z,1478864038.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:58.795Z,1478864038.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:58.811Z,1478864038.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:59.185Z,1478864039.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:59.217Z,1478864039.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:59.585Z,1478864039.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:33:59.619Z,1478864039.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:33:59.985Z,1478864039.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:00.017Z,1478864040.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:00.385Z,1478864040.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:00.419Z,1478864040.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:00.785Z,1478864040.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:00.821Z,1478864040.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:01.185Z,1478864041.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:01.217Z,1478864041.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:01.585Z,1478864041.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:01.618Z,1478864041.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:01.985Z,1478864041.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:02.018Z,1478864042.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:02.396Z,1478864042.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:02.412Z,1478864042.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:02.785Z,1478864042.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:02.819Z,1478864042.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:03.189Z,1478864043.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:03.225Z,1478864043.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:03.585Z,1478864043.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:03.609Z,1478864043.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:03.985Z,1478864043.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:04.021Z,1478864044.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:04.385Z,1478864044.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:04.420Z,1478864044.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:04.785Z,1478864044.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:04.817Z,1478864044.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:05.189Z,1478864045.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:05.228Z,1478864045.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:05.585Z,1478864045.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:05.628Z,1478864045.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:05.985Z,1478864045.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:06.025Z,1478864046.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:06.397Z,1478864046.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:06.435Z,1478864046.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:06.793Z,1478864046.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:06.813Z,1478864046.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:07.193Z,1478864047.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:07.208Z,1478864047.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:07.591Z,1478864047.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:07.621Z,1478864047.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:07.993Z,1478864047.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:08.013Z,1478864048.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:08.388Z,1478864048.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:08.420Z,1478864048.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:08.796Z,1478864048.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:08.812Z,1478864048.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:09.193Z,1478864049.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:09.215Z,1478864049.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:09.589Z,1478864049.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:09.622Z,1478864049.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:09.985Z,1478864049.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:10.037Z,1478864050.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:10.396Z,1478864050.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:10.458Z,1478864050.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:10.788Z,1478864050.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:10.804Z,1478864050.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:11.192Z,1478864051.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:11.208Z,1478864051.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:11.595Z,1478864051.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:11.648Z,1478864051.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:11.992Z,1478864051.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:12.007Z,1478864052.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:12.393Z,1478864052.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:12.454Z,1478864052.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:12.788Z,1478864052.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:12.848Z,1478864052.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:13.192Z,1478864053.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:13.208Z,1478864053.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:13.600Z,1478864053.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:13.615Z,1478864053.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:13.989Z,1478864053.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:14.014Z,1478864054.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:14.400Z,1478864054.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:14.416Z,1478864054.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:14.785Z,1478864054.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:14.821Z,1478864054.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:15.185Z,1478864055.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:15.217Z,1478864055.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:15.585Z,1478864055.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:15.601Z,1478864055.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:15.985Z,1478864055.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:16.005Z,1478864056.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:16.389Z,1478864056.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:16.409Z,1478864056.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:16.788Z,1478864056.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:16.804Z,1478864056.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:17.192Z,1478864057.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:17.213Z,1478864057.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:17.588Z,1478864057.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:17.616Z,1478864057.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:17.992Z,1478864057.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:18.008Z,1478864058.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:18.385Z,1478864058.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:18.419Z,1478864058.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:18.785Z,1478864058.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:18.810Z,1478864058.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:19.185Z,1478864059.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:19.217Z,1478864059.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:19.585Z,1478864059.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:19.617Z,1478864059.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:19.985Z,1478864059.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:20.011Z,1478864060.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:20.385Z,1478864060.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:20.425Z,1478864060.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:20.785Z,1478864060.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:20.805Z,1478864060.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:21.193Z,1478864061.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:21.229Z,1478864061.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:21.585Z,1478864061.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:21.605Z,1478864061.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:21.989Z,1478864061.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:22.005Z,1478864062.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:22.394Z,1478864062.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:22.417Z,1478864062.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:22.793Z,1478864062.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:22.809Z,1478864062.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:23.202Z,1478864063.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:23.218Z,1478864063.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:23.586Z,1478864063.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:23.618Z,1478864063.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:23.986Z,1478864063.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:24.017Z,1478864064.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:24.394Z,1478864064.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:24.413Z,1478864064.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:24.793Z,1478864064.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:24.877Z,1478864064.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:25.192Z,1478864065.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:25.213Z,1478864065.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:25.592Z,1478864065.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:25.613Z,1478864065.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:25.992Z,1478864065.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:26.081Z,1478864066.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:26.393Z,1478864066.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:26.409Z,1478864066.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:26.792Z,1478864066.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:26.848Z,1478864066.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:27.190Z,1478864067.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:27.242Z,1478864067.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:27.592Z,1478864067.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:27.608Z,1478864067.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:27.991Z,1478864067.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:28.013Z,1478864068.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:28.391Z,1478864068.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:28.419Z,1478864068.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:28.788Z,1478864068.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:28.811Z,1478864068.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:29.193Z,1478864069.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:29.213Z,1478864069.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:29.585Z,1478864069.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:29.617Z,1478864069.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:29.985Z,1478864069.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:30.020Z,1478864070.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:30.385Z,1478864070.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:30.418Z,1478864070.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:30.791Z,1478864070.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:30.807Z,1478864070.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:31.192Z,1478864071.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:31.208Z,1478864071.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:31.585Z,1478864071.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:31.621Z,1478864071.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:31.985Z,1478864071.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:32.019Z,1478864072.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:32.385Z,1478864072.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:32.417Z,1478864072.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:32.785Z,1478864072.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:32.808Z,1478864072.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:33.185Z,1478864073.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:33.225Z,1478864073.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:33.585Z,1478864073.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:33.612Z,1478864073.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:33.989Z,1478864073.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:34.083Z,1478864074.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:34.392Z,1478864074.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:34.407Z,1478864074.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:34.796Z,1478864074.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:34.816Z,1478864074.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:35.192Z,1478864075.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:35.213Z,1478864075.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:35.596Z,1478864075.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:35.612Z,1478864075.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:35.989Z,1478864075.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:36.083Z,1478864076.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:36.385Z,1478864076.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:36.425Z,1478864076.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:36.785Z,1478864076.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:36.800Z,1478864076.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:37.188Z,1478864077.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:37.204Z,1478864077.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:37.585Z,1478864077.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:37.605Z,1478864077.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:37.992Z,1478864077.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:38.069Z,1478864078.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:38.401Z,1478864078.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:38.453Z,1478864078.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:38.792Z,1478864078.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:38.813Z,1478864078.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:42.290Z,1478864082.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:42.319Z,1478864082.319 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:34:42.319Z,1478864082.319 [BPC1] Communications Fault, FailCount= 1
2016-11-11T11:34:42.319Z,1478864082.319 [BPC1](ERROR): Communications Fault
2016-11-11T11:34:42.327Z,1478864082.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:42.398Z,1478864082.398 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:34:42.453Z,1478864082.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:42.477Z,1478864082.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:42.829Z,1478864082.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:42.872Z,1478864082.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:43.231Z,1478864083.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:43.269Z,1478864083.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:43.289Z,1478864083.289 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:34:43.289Z,1478864083.289 [BPC1] No Fault, FailCount= 1
2016-11-11T11:34:43.631Z,1478864083.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:43.717Z,1478864083.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:44.030Z,1478864084.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:44.082Z,1478864084.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:44.433Z,1478864084.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:44.512Z,1478864084.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:44.838Z,1478864084.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:44.854Z,1478864084.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:45.237Z,1478864085.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:45.254Z,1478864085.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:45.636Z,1478864085.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:45.653Z,1478864085.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:46.037Z,1478864086.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:46.052Z,1478864086.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:46.437Z,1478864086.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:46.513Z,1478864086.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:46.837Z,1478864086.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:46.871Z,1478864086.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:47.229Z,1478864087.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:47.256Z,1478864087.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:47.629Z,1478864087.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:47.665Z,1478864087.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:48.073Z,1478864088.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:48.121Z,1478864088.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:48.435Z,1478864088.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:48.450Z,1478864088.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:48.833Z,1478864088.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:48.853Z,1478864088.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:49.229Z,1478864089.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:49.245Z,1478864089.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:49.635Z,1478864089.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:49.651Z,1478864089.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:50.084Z,1478864090.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:50.108Z,1478864090.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:50.437Z,1478864090.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:50.453Z,1478864090.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:50.835Z,1478864090.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:50.851Z,1478864090.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:51.233Z,1478864091.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:51.265Z,1478864091.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:51.636Z,1478864091.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:51.652Z,1478864091.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:52.061Z,1478864092.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:52.101Z,1478864092.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:52.433Z,1478864092.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:52.459Z,1478864092.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:52.831Z,1478864092.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:52.865Z,1478864092.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:53.229Z,1478864093.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:53.266Z,1478864093.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:53.629Z,1478864093.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:53.657Z,1478864093.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:54.056Z,1478864094.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:54.096Z,1478864094.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:54.432Z,1478864094.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:54.456Z,1478864094.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:54.837Z,1478864094.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:54.901Z,1478864094.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:55.229Z,1478864095.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:55.265Z,1478864095.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:55.629Z,1478864095.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:55.659Z,1478864095.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:56.031Z,1478864096.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:56.134Z,1478864096.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:56.433Z,1478864096.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:56.459Z,1478864096.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:56.829Z,1478864096.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:56.877Z,1478864096.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:57.229Z,1478864097.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:57.281Z,1478864097.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:57.633Z,1478864097.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:57.665Z,1478864097.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:58.033Z,1478864098.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:58.066Z,1478864098.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:58.469Z,1478864098.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:58.540Z,1478864098.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:58.829Z,1478864098.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:58.865Z,1478864098.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:59.232Z,1478864099.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:59.248Z,1478864099.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:34:59.634Z,1478864099.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:34:59.649Z,1478864099.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:00.037Z,1478864100.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:00.052Z,1478864100.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:00.438Z,1478864100.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:00.516Z,1478864100.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:00.840Z,1478864100.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:00.861Z,1478864100.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:01.236Z,1478864101.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:01.259Z,1478864101.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:01.629Z,1478864101.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:01.661Z,1478864101.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:02.059Z,1478864102.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:02.107Z,1478864102.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:02.429Z,1478864102.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:02.461Z,1478864102.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:02.829Z,1478864102.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:02.861Z,1478864102.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:03.229Z,1478864103.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:03.264Z,1478864103.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:03.629Z,1478864103.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:03.661Z,1478864103.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:04.049Z,1478864104.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:04.073Z,1478864104.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:04.430Z,1478864104.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:04.461Z,1478864104.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:04.829Z,1478864104.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:04.865Z,1478864104.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:05.230Z,1478864105.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:05.258Z,1478864105.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:05.629Z,1478864105.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:05.665Z,1478864105.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:06.046Z,1478864106.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:06.102Z,1478864106.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:06.435Z,1478864106.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:06.465Z,1478864106.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:06.832Z,1478864106.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:06.866Z,1478864106.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:07.234Z,1478864107.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:07.258Z,1478864107.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:07.636Z,1478864107.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:07.677Z,1478864107.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:08.047Z,1478864108.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:08.100Z,1478864108.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:08.429Z,1478864108.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:08.465Z,1478864108.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:08.829Z,1478864108.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:08.877Z,1478864108.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:09.230Z,1478864109.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:09.249Z,1478864109.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:09.629Z,1478864109.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:09.649Z,1478864109.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:10.033Z,1478864110.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:10.121Z,1478864110.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:10.440Z,1478864110.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:10.455Z,1478864110.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:10.829Z,1478864110.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:10.878Z,1478864110.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:11.229Z,1478864111.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:11.301Z,1478864111.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:11.629Z,1478864111.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:11.663Z,1478864111.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:12.029Z,1478864112.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:12.063Z,1478864112.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:12.442Z,1478864112.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:12.504Z,1478864112.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:12.829Z,1478864112.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:12.849Z,1478864112.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:13.232Z,1478864113.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:13.247Z,1478864113.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:13.635Z,1478864113.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:13.650Z,1478864113.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:14.036Z,1478864114.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:14.057Z,1478864114.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:14.458Z,1478864114.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:14.530Z,1478864114.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:14.836Z,1478864114.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:14.851Z,1478864114.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:15.244Z,1478864115.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:15.259Z,1478864115.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:15.629Z,1478864115.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:15.659Z,1478864115.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:16.035Z,1478864116.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:16.080Z,1478864116.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:16.429Z,1478864116.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:16.455Z,1478864116.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:16.829Z,1478864116.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:16.870Z,1478864116.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:17.229Z,1478864117.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:17.261Z,1478864117.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:17.629Z,1478864117.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:17.657Z,1478864117.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:18.031Z,1478864118.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:18.070Z,1478864118.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:18.432Z,1478864118.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:18.458Z,1478864118.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:18.833Z,1478864118.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:18.869Z,1478864118.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:19.236Z,1478864119.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:19.256Z,1478864119.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:19.636Z,1478864119.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:19.663Z,1478864119.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:20.046Z,1478864120.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:20.068Z,1478864120.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:20.429Z,1478864120.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:20.463Z,1478864120.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:20.829Z,1478864120.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:20.861Z,1478864120.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:21.240Z,1478864121.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:21.269Z,1478864121.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:21.629Z,1478864121.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:21.674Z,1478864121.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:22.031Z,1478864122.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:22.075Z,1478864122.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:22.429Z,1478864122.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:22.461Z,1478864122.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:22.829Z,1478864122.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:22.872Z,1478864122.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:23.229Z,1478864123.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:23.282Z,1478864123.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:23.629Z,1478864123.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:23.649Z,1478864123.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:24.072Z,1478864124.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:24.142Z,1478864124.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:24.436Z,1478864124.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:24.488Z,1478864124.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:24.832Z,1478864124.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:24.862Z,1478864124.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:25.235Z,1478864125.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:25.274Z,1478864125.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:25.636Z,1478864125.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:25.669Z,1478864125.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:26.029Z,1478864126.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:26.078Z,1478864126.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:26.445Z,1478864126.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:26.491Z,1478864126.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:26.841Z,1478864126.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:26.882Z,1478864126.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:27.235Z,1478864127.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:27.257Z,1478864127.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:27.636Z,1478864127.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:27.651Z,1478864127.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:28.039Z,1478864128.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:28.055Z,1478864128.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:28.466Z,1478864128.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:28.498Z,1478864128.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:28.829Z,1478864128.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:28.865Z,1478864128.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:29.229Z,1478864129.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:29.262Z,1478864129.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:29.629Z,1478864129.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:29.649Z,1478864129.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:30.034Z,1478864130.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:30.049Z,1478864130.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:30.441Z,1478864130.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:30.476Z,1478864130.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:30.833Z,1478864130.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:30.853Z,1478864130.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:31.232Z,1478864131.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:31.247Z,1478864131.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:31.641Z,1478864131.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:31.656Z,1478864131.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:32.054Z,1478864132.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:32.101Z,1478864132.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:32.436Z,1478864132.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:32.451Z,1478864132.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:32.841Z,1478864132.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:32.856Z,1478864132.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:33.229Z,1478864133.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:33.264Z,1478864133.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:33.629Z,1478864133.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:33.657Z,1478864133.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:34.041Z,1478864134.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:34.089Z,1478864134.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:34.433Z,1478864134.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:34.470Z,1478864134.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:34.833Z,1478864134.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:34.869Z,1478864134.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:35.237Z,1478864135.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:35.273Z,1478864135.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:35.636Z,1478864135.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:35.664Z,1478864135.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:36.029Z,1478864136.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:36.056Z,1478864136.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:36.431Z,1478864136.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:36.472Z,1478864136.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:36.836Z,1478864136.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:36.886Z,1478864136.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:37.236Z,1478864137.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:37.251Z,1478864137.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:37.631Z,1478864137.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:37.664Z,1478864137.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:38.099Z,1478864138.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:38.181Z,1478864138.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:38.429Z,1478864138.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:38.456Z,1478864138.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:38.834Z,1478864138.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:38.869Z,1478864138.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:42.166Z,1478864142.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:42.211Z,1478864142.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:42.317Z,1478864142.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:42.365Z,1478864142.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:42.685Z,1478864142.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:42.738Z,1478864142.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:43.065Z,1478864143.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:43.106Z,1478864143.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:43.469Z,1478864143.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:43.484Z,1478864143.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:43.871Z,1478864143.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:43.893Z,1478864143.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:44.272Z,1478864144.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:44.288Z,1478864144.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:44.673Z,1478864144.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:44.688Z,1478864144.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:45.076Z,1478864145.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:45.097Z,1478864145.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:45.465Z,1478864145.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:45.498Z,1478864145.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:45.869Z,1478864145.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:45.914Z,1478864145.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:46.271Z,1478864146.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:46.299Z,1478864146.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:46.685Z,1478864146.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:46.725Z,1478864146.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:47.069Z,1478864147.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:47.084Z,1478864147.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:47.470Z,1478864147.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:47.497Z,1478864147.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:47.877Z,1478864147.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:47.927Z,1478864147.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:48.273Z,1478864148.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:48.319Z,1478864148.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:48.677Z,1478864148.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:48.711Z,1478864148.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:49.068Z,1478864149.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:49.089Z,1478864149.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:49.469Z,1478864149.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:49.484Z,1478864149.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:49.873Z,1478864149.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:49.928Z,1478864149.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:50.265Z,1478864150.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:50.297Z,1478864150.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:50.669Z,1478864150.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:50.702Z,1478864150.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:51.069Z,1478864151.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:51.095Z,1478864151.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:51.465Z,1478864151.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:51.505Z,1478864151.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:51.865Z,1478864151.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:51.901Z,1478864151.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:52.265Z,1478864152.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:52.302Z,1478864152.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:52.665Z,1478864152.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:52.705Z,1478864152.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:53.065Z,1478864153.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:53.106Z,1478864153.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:53.465Z,1478864153.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:53.501Z,1478864153.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:53.871Z,1478864153.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:53.925Z,1478864153.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:54.269Z,1478864154.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:54.284Z,1478864154.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:54.667Z,1478864154.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:54.694Z,1478864154.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:55.072Z,1478864155.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:55.134Z,1478864155.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:55.474Z,1478864155.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:55.489Z,1478864155.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:55.530Z,1478864155.530 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T11:35:55.877Z,1478864155.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:55.894Z,1478864155.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:56.265Z,1478864156.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:56.310Z,1478864156.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:56.672Z,1478864156.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:56.688Z,1478864156.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:57.068Z,1478864157.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:57.117Z,1478864157.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:57.471Z,1478864157.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:57.524Z,1478864157.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:57.872Z,1478864157.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:57.957Z,1478864157.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:58.265Z,1478864158.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:58.305Z,1478864158.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:58.665Z,1478864158.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:58.701Z,1478864158.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:59.065Z,1478864159.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:59.104Z,1478864159.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:59.485Z,1478864159.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:59.517Z,1478864159.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:35:59.865Z,1478864159.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:35:59.944Z,1478864159.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:00.265Z,1478864160.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:00.306Z,1478864160.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:00.679Z,1478864160.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:00.708Z,1478864160.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:01.065Z,1478864161.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:01.105Z,1478864161.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:01.470Z,1478864161.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:01.497Z,1478864161.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:01.865Z,1478864161.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:01.969Z,1478864161.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:02.273Z,1478864162.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:02.312Z,1478864162.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:02.670Z,1478864162.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:02.689Z,1478864162.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:03.069Z,1478864163.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:03.089Z,1478864163.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:03.484Z,1478864163.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:03.519Z,1478864163.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:03.877Z,1478864163.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:03.952Z,1478864163.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:04.267Z,1478864164.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:04.297Z,1478864164.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:04.669Z,1478864164.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:04.709Z,1478864164.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:05.084Z,1478864165.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:05.133Z,1478864165.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:05.470Z,1478864165.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:05.505Z,1478864165.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:05.865Z,1478864165.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:05.876Z,1478864165.876 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T11:36:05.916Z,1478864165.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:06.273Z,1478864166.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:06.318Z,1478864166.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:06.673Z,1478864166.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:06.693Z,1478864166.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:07.071Z,1478864167.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:07.097Z,1478864167.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:07.216Z,1478864167.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:07.476Z,1478864167.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:07.493Z,1478864167.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:07.872Z,1478864167.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:07.937Z,1478864167.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:08.012Z,1478864168.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:08.276Z,1478864168.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:08.299Z,1478864168.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:08.679Z,1478864168.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:08.704Z,1478864168.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:09.071Z,1478864169.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:09.116Z,1478864169.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:09.465Z,1478864169.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:09.512Z,1478864169.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:09.869Z,1478864169.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:09.923Z,1478864169.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:10.274Z,1478864170.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:10.291Z,1478864170.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:10.679Z,1478864170.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:10.727Z,1478864170.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:11.072Z,1478864171.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:11.105Z,1478864171.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:11.472Z,1478864171.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:11.523Z,1478864171.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:11.910Z,1478864171.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:11.971Z,1478864171.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:12.268Z,1478864172.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:12.301Z,1478864172.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:12.672Z,1478864172.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:12.701Z,1478864172.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:13.072Z,1478864173.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:13.097Z,1478864173.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:13.476Z,1478864173.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:13.492Z,1478864173.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:13.882Z,1478864173.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:13.948Z,1478864173.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:14.267Z,1478864174.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:14.308Z,1478864174.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:14.673Z,1478864174.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:14.692Z,1478864174.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:15.072Z,1478864175.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:15.093Z,1478864175.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:15.476Z,1478864175.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:15.491Z,1478864175.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:15.895Z,1478864175.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:15.950Z,1478864175.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:16.283Z,1478864176.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:16.314Z,1478864176.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:16.673Z,1478864176.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:16.713Z,1478864176.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:17.075Z,1478864177.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:17.090Z,1478864177.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:17.472Z,1478864177.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:17.498Z,1478864177.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:17.934Z,1478864177.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:17.945Z,1478864177.945 [PNI_TCM](ERROR): CRC does not match. Expected:0x42559 got:0x48701
2016-11-11T11:36:17.973Z,1478864177.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:18.275Z,1478864178.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:18.290Z,1478864178.290 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:18.290Z,1478864178.290 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 116
2016-11-11T11:36:18.290Z,1478864178.290 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:36:18.297Z,1478864178.297 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:18.297Z,1478864178.297 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 116
2016-11-11T11:36:18.297Z,1478864178.297 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:36:18.299Z,1478864178.299 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:18.299Z,1478864178.299 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 116
2016-11-11T11:36:18.300Z,1478864178.300 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:36:18.339Z,1478864178.339 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:36:18.340Z,1478864178.339 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:36:18.340Z,1478864178.340 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:36:18.673Z,1478864178.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:18.726Z,1478864178.726 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:36:18.726Z,1478864178.726 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 116
2016-11-11T11:36:18.726Z,1478864178.726 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:36:18.726Z,1478864178.727 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 116
2016-11-11T11:36:18.727Z,1478864178.727 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:36:18.727Z,1478864178.727 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 116
2016-11-11T11:36:19.065Z,1478864179.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:19.100Z,1478864179.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:36:19.100Z,1478864179.100 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:36:19.101Z,1478864179.101 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:36:19.105Z,1478864179.105 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:36:19.106Z,1478864179.106 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:36:19.106Z,1478864179.106 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:36:19.106Z,1478864179.106 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:36:19.107Z,1478864179.107 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:36:19.107Z,1478864179.107 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:36:19.467Z,1478864179.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:19.502Z,1478864179.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:19.871Z,1478864179.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:19.901Z,1478864179.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:20.295Z,1478864180.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:20.314Z,1478864180.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:20.673Z,1478864180.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:20.713Z,1478864180.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:21.072Z,1478864181.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:21.084Z,1478864181.084 [PNI_TCM](ERROR): CRC does not match. Expected:0x33147 got:0x49152
2016-11-11T11:36:21.109Z,1478864181.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:21.477Z,1478864181.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:21.511Z,1478864181.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:21.888Z,1478864181.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:21.924Z,1478864181.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:22.274Z,1478864182.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:22.292Z,1478864182.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:22.684Z,1478864182.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:22.730Z,1478864182.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:23.067Z,1478864183.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:23.103Z,1478864183.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:23.466Z,1478864183.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:23.497Z,1478864183.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:23.865Z,1478864183.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:23.921Z,1478864183.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:24.267Z,1478864184.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:24.274Z,1478864184.274 [PNI_TCM](ERROR): CRC does not match. Expected:0x51361 got:0x17011
2016-11-11T11:36:24.330Z,1478864184.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:24.670Z,1478864184.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:24.710Z,1478864184.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:25.073Z,1478864185.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:25.127Z,1478864185.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:25.474Z,1478864185.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:25.490Z,1478864185.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:25.905Z,1478864185.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:25.962Z,1478864185.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:26.269Z,1478864186.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:26.322Z,1478864186.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:26.675Z,1478864186.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:26.694Z,1478864186.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:27.076Z,1478864187.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:27.094Z,1478864187.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:27.471Z,1478864187.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:27.493Z,1478864187.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:27.907Z,1478864187.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:27.960Z,1478864187.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:28.269Z,1478864188.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:28.295Z,1478864188.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:28.666Z,1478864188.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:28.696Z,1478864188.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:29.067Z,1478864189.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:29.104Z,1478864189.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:29.466Z,1478864189.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:29.500Z,1478864189.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:29.899Z,1478864189.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:29.951Z,1478864189.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:30.267Z,1478864190.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:30.294Z,1478864190.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:30.676Z,1478864190.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:30.745Z,1478864190.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:31.065Z,1478864191.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:31.101Z,1478864191.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:31.465Z,1478864191.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:31.488Z,1478864191.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:31.875Z,1478864191.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:31.925Z,1478864191.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:32.274Z,1478864192.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:32.297Z,1478864192.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:32.672Z,1478864192.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:32.688Z,1478864192.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:33.094Z,1478864193.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:33.135Z,1478864193.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:33.485Z,1478864193.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:33.508Z,1478864193.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:33.866Z,1478864193.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:33.902Z,1478864193.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:34.272Z,1478864194.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:34.296Z,1478864194.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:34.669Z,1478864194.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:34.709Z,1478864194.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:35.071Z,1478864195.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:35.087Z,1478864195.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:35.469Z,1478864195.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:35.493Z,1478864195.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:35.873Z,1478864195.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:35.893Z,1478864195.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:36.274Z,1478864196.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:36.318Z,1478864196.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:36.679Z,1478864196.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:36.694Z,1478864196.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:37.085Z,1478864197.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:37.161Z,1478864197.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:37.465Z,1478864197.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:37.497Z,1478864197.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:37.866Z,1478864197.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:37.893Z,1478864197.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:38.278Z,1478864198.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:38.363Z,1478864198.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:38.692Z,1478864198.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:38.765Z,1478864198.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:39.071Z,1478864199.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:39.099Z,1478864199.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:42.492Z,1478864202.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:42.534Z,1478864202.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:42.639Z,1478864202.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:42.667Z,1478864202.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:43.024Z,1478864203.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:43.079Z,1478864203.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:43.424Z,1478864203.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:43.480Z,1478864203.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:43.873Z,1478864203.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:43.898Z,1478864203.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:44.233Z,1478864204.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:44.249Z,1478864204.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:44.624Z,1478864204.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:44.651Z,1478864204.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:45.025Z,1478864205.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:45.047Z,1478864205.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:45.418Z,1478864205.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:45.453Z,1478864205.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:45.845Z,1478864205.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:45.905Z,1478864205.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:46.217Z,1478864206.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:46.261Z,1478864206.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:46.617Z,1478864206.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:46.640Z,1478864206.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:47.019Z,1478864207.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:47.039Z,1478864207.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:47.426Z,1478864207.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:47.444Z,1478864207.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:47.823Z,1478864207.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:47.872Z,1478864207.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:48.231Z,1478864208.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:48.249Z,1478864208.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:48.628Z,1478864208.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:48.646Z,1478864208.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:49.026Z,1478864209.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:49.044Z,1478864209.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:49.425Z,1478864209.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:49.453Z,1478864209.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:49.817Z,1478864209.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:49.894Z,1478864209.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:50.228Z,1478864210.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:50.324Z,1478864210.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:50.619Z,1478864210.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:50.653Z,1478864210.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:51.017Z,1478864211.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:51.057Z,1478864211.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:51.418Z,1478864211.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:51.456Z,1478864211.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:51.823Z,1478864211.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:51.866Z,1478864211.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:52.222Z,1478864212.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:52.240Z,1478864212.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:52.624Z,1478864212.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:52.645Z,1478864212.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:53.021Z,1478864213.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:53.058Z,1478864213.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:53.426Z,1478864213.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:53.452Z,1478864213.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:53.890Z,1478864213.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:53.948Z,1478864213.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:54.217Z,1478864214.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:54.277Z,1478864214.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:54.619Z,1478864214.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:54.627Z,1478864214.627 [PNI_TCM](ERROR): CRC does not match. Expected:0x32798 got:0x6591
2016-11-11T11:36:54.670Z,1478864214.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:55.023Z,1478864215.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:55.093Z,1478864215.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:55.424Z,1478864215.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:55.489Z,1478864215.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:55.841Z,1478864215.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:55.934Z,1478864215.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:56.223Z,1478864216.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:56.266Z,1478864216.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:56.626Z,1478864216.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:56.653Z,1478864216.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:57.024Z,1478864217.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:57.076Z,1478864217.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:57.426Z,1478864217.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:57.473Z,1478864217.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:57.871Z,1478864217.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:57.924Z,1478864217.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:58.226Z,1478864218.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:58.243Z,1478864218.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:58.625Z,1478864218.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:58.649Z,1478864218.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:59.026Z,1478864219.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:59.058Z,1478864219.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:59.418Z,1478864219.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:59.446Z,1478864219.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:36:59.853Z,1478864219.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:36:59.901Z,1478864219.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:00.221Z,1478864220.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:00.255Z,1478864220.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:00.623Z,1478864220.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:00.641Z,1478864220.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:01.028Z,1478864221.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:01.045Z,1478864221.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:01.425Z,1478864221.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:01.442Z,1478864221.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:01.824Z,1478864221.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:01.841Z,1478864221.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:02.219Z,1478864222.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:02.254Z,1478864222.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:02.620Z,1478864222.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:02.681Z,1478864222.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:03.018Z,1478864223.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:03.043Z,1478864223.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:03.424Z,1478864223.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:03.441Z,1478864223.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:03.822Z,1478864223.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:03.848Z,1478864223.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:04.226Z,1478864224.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:04.278Z,1478864224.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:04.617Z,1478864224.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:04.650Z,1478864224.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:05.017Z,1478864225.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:05.051Z,1478864225.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:05.419Z,1478864225.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:05.453Z,1478864225.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:05.818Z,1478864225.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:05.853Z,1478864225.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:06.220Z,1478864226.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:06.274Z,1478864226.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:06.623Z,1478864226.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:06.662Z,1478864226.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:07.019Z,1478864227.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:07.069Z,1478864227.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:07.418Z,1478864227.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:07.454Z,1478864227.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:07.825Z,1478864227.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:07.901Z,1478864227.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:08.224Z,1478864228.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:08.247Z,1478864228.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:08.621Z,1478864228.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:08.645Z,1478864228.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:09.024Z,1478864229.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:09.042Z,1478864229.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:09.424Z,1478864229.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:09.501Z,1478864229.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:09.861Z,1478864229.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:09.898Z,1478864229.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:10.219Z,1478864230.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:10.287Z,1478864230.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:10.617Z,1478864230.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:10.666Z,1478864230.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:11.018Z,1478864231.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:11.057Z,1478864231.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:11.420Z,1478864231.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:11.468Z,1478864231.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:11.876Z,1478864231.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:11.944Z,1478864231.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:12.221Z,1478864232.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:12.262Z,1478864232.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:12.617Z,1478864232.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:12.655Z,1478864232.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:13.017Z,1478864233.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:13.056Z,1478864233.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:13.421Z,1478864233.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:13.450Z,1478864233.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:13.825Z,1478864233.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:13.878Z,1478864233.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:14.217Z,1478864234.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:14.262Z,1478864234.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:14.621Z,1478864234.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:14.657Z,1478864234.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:15.017Z,1478864235.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:15.034Z,1478864235.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:15.417Z,1478864235.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:15.464Z,1478864235.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:15.817Z,1478864235.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:15.859Z,1478864235.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:16.223Z,1478864236.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:16.241Z,1478864236.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:16.625Z,1478864236.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:16.642Z,1478864236.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:17.031Z,1478864237.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:17.053Z,1478864237.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:17.425Z,1478864237.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:17.442Z,1478864237.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:17.818Z,1478864237.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:17.861Z,1478864237.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:18.218Z,1478864238.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:18.299Z,1478864238.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:18.618Z,1478864238.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:18.653Z,1478864238.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:19.017Z,1478864239.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:19.057Z,1478864239.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:19.417Z,1478864239.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:19.449Z,1478864239.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:19.821Z,1478864239.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:19.856Z,1478864239.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:20.217Z,1478864240.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:20.310Z,1478864240.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:20.624Z,1478864240.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:20.642Z,1478864240.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:21.019Z,1478864241.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:21.056Z,1478864241.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:21.424Z,1478864241.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:21.445Z,1478864241.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:21.829Z,1478864241.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:21.880Z,1478864241.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:22.217Z,1478864242.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:22.257Z,1478864242.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:22.621Z,1478864242.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:22.652Z,1478864242.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:23.024Z,1478864243.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:23.081Z,1478864243.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:23.428Z,1478864243.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:23.517Z,1478864243.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:23.830Z,1478864243.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:23.909Z,1478864243.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:24.218Z,1478864244.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:24.248Z,1478864244.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:24.621Z,1478864244.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:24.684Z,1478864244.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:25.018Z,1478864245.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:25.056Z,1478864245.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:25.417Z,1478864245.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:25.462Z,1478864245.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:25.851Z,1478864245.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:25.913Z,1478864245.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:26.217Z,1478864246.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:26.261Z,1478864246.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:26.623Z,1478864246.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:26.709Z,1478864246.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:27.023Z,1478864247.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:27.039Z,1478864247.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:27.424Z,1478864247.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:27.465Z,1478864247.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:27.845Z,1478864247.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:27.876Z,1478864247.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:28.225Z,1478864248.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:28.281Z,1478864248.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:28.624Z,1478864248.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:28.653Z,1478864248.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:29.025Z,1478864249.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:29.042Z,1478864249.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:29.424Z,1478864249.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:29.445Z,1478864249.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:29.820Z,1478864249.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:29.906Z,1478864249.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:30.220Z,1478864250.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:30.239Z,1478864250.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:30.623Z,1478864250.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:30.641Z,1478864250.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:31.024Z,1478864251.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:31.041Z,1478864251.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:31.424Z,1478864251.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:31.441Z,1478864251.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:31.824Z,1478864251.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:31.841Z,1478864251.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:32.270Z,1478864252.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:32.301Z,1478864252.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:32.617Z,1478864252.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:32.634Z,1478864252.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:33.017Z,1478864253.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:33.040Z,1478864253.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:33.424Z,1478864253.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:33.442Z,1478864253.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:33.820Z,1478864253.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:33.839Z,1478864253.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:34.266Z,1478864254.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:34.290Z,1478864254.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:34.619Z,1478864254.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:34.685Z,1478864254.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:35.019Z,1478864255.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:35.067Z,1478864255.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:35.419Z,1478864255.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:35.443Z,1478864255.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:35.845Z,1478864255.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:35.878Z,1478864255.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:36.228Z,1478864256.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:36.270Z,1478864256.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:36.619Z,1478864256.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:36.668Z,1478864256.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:37.019Z,1478864257.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:37.060Z,1478864257.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:37.426Z,1478864257.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:37.495Z,1478864257.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:37.819Z,1478864257.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:37.936Z,1478864257.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:38.219Z,1478864258.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:38.294Z,1478864258.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:38.303Z,1478864258.303 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T11:37:38.303Z,1478864258.303 [Default:CheckIn:C.Wait] Stopped
2016-11-11T11:37:38.303Z,1478864258.303 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T11:37:38.303Z,1478864258.303 [Default:CheckIn:D] Running Loop=1
2016-11-11T11:37:38.619Z,1478864258.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:38.677Z,1478864258.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:38.711Z,1478864258.711 [Default:CheckIn:D] Stopped
2016-11-11T11:37:38.711Z,1478864258.711 [Default:CheckIn:E] Running Loop=1
2016-11-11T11:37:39.019Z,1478864259.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:39.075Z,1478864259.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:39.108Z,1478864259.108 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 407.623340 min 
2016-11-11T11:37:39.108Z,1478864259.109 [Default:CheckIn:E] Stopped
2016-11-11T11:37:39.109Z,1478864259.109 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T11:37:39.109Z,1478864259.109 [Default:CheckIn] Stopped
2016-11-11T11:37:39.109Z,1478864259.109 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T11:37:39.109Z,1478864259.109 [Default:CheckIn](INFO): Running loop #40
2016-11-11T11:37:39.109Z,1478864259.109 [Default:CheckIn] Running Loop=40
2016-11-11T11:37:39.109Z,1478864259.109 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T11:37:39.109Z,1478864259.109 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T11:37:39.430Z,1478864259.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:39.517Z,1478864259.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:44.899Z,1478864264.899 [NAL9602](INFO): Powering up
2016-11-11T11:37:44.930Z,1478864264.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:44.985Z,1478864264.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:45.088Z,1478864265.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:45.117Z,1478864265.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:45.478Z,1478864265.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:45.509Z,1478864265.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:45.895Z,1478864265.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:45.921Z,1478864265.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:46.279Z,1478864266.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:46.326Z,1478864266.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:46.678Z,1478864266.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:46.693Z,1478864266.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:47.073Z,1478864267.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:47.093Z,1478864267.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:47.494Z,1478864267.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:47.533Z,1478864267.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:47.869Z,1478864267.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:47.895Z,1478864267.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:48.274Z,1478864268.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:48.328Z,1478864268.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:48.688Z,1478864268.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:48.742Z,1478864268.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:49.083Z,1478864269.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:49.133Z,1478864269.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:49.479Z,1478864269.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:49.509Z,1478864269.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:49.882Z,1478864269.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:49.903Z,1478864269.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:50.275Z,1478864270.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:50.310Z,1478864270.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:50.679Z,1478864270.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:50.747Z,1478864270.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:51.071Z,1478864271.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:51.107Z,1478864271.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:51.470Z,1478864271.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:51.519Z,1478864271.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:51.875Z,1478864271.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:51.924Z,1478864271.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:52.277Z,1478864272.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:52.312Z,1478864272.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:52.671Z,1478864272.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:52.710Z,1478864272.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:53.071Z,1478864273.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:53.105Z,1478864273.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:53.471Z,1478864273.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:53.500Z,1478864273.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:53.874Z,1478864273.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:53.910Z,1478864273.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:54.287Z,1478864274.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:54.309Z,1478864274.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:54.673Z,1478864274.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:54.693Z,1478864274.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:55.073Z,1478864275.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:55.089Z,1478864275.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:55.488Z,1478864275.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:55.503Z,1478864275.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:55.861Z,1478864275.861 [NAL9602](INFO): NAL9602 initialized
2016-11-11T11:37:55.878Z,1478864275.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:55.894Z,1478864275.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:56.269Z,1478864276.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:56.289Z,1478864276.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:56.653Z,1478864276.653 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T11:37:56.653Z,1478864276.653 [NAL9602] Data Fault, FailCount= 5
2016-11-11T11:37:56.653Z,1478864276.653 [NAL9602](ERROR): Data Fault
2016-11-11T11:37:56.670Z,1478864276.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:56.733Z,1478864276.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:56.752Z,1478864276.752 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T11:37:56.753Z,1478864276.753 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-11-11T11:37:57.053Z,1478864277.053 [NAL9602](INFO): Powering down
2016-11-11T11:37:57.070Z,1478864277.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:57.093Z,1478864277.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:57.473Z,1478864277.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:57.521Z,1478864277.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:57.872Z,1478864277.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:57.887Z,1478864277.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:58.273Z,1478864278.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:58.321Z,1478864278.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:58.669Z,1478864278.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:58.684Z,1478864278.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:59.073Z,1478864279.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:59.121Z,1478864279.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:59.479Z,1478864279.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:59.494Z,1478864279.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:37:59.872Z,1478864279.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:37:59.888Z,1478864279.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:00.269Z,1478864280.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:00.332Z,1478864280.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:00.669Z,1478864280.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:00.689Z,1478864280.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:01.073Z,1478864281.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:01.089Z,1478864281.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:01.469Z,1478864281.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:01.489Z,1478864281.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:01.873Z,1478864281.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:01.889Z,1478864281.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:02.269Z,1478864282.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:02.289Z,1478864282.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:02.674Z,1478864282.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:02.688Z,1478864282.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:03.068Z,1478864283.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:03.085Z,1478864283.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:03.476Z,1478864283.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:03.492Z,1478864283.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:03.873Z,1478864283.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:03.890Z,1478864283.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:04.272Z,1478864284.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:04.313Z,1478864284.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:04.672Z,1478864284.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:04.688Z,1478864284.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:05.072Z,1478864285.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:05.088Z,1478864285.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:05.477Z,1478864285.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:05.493Z,1478864285.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:05.869Z,1478864285.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:05.890Z,1478864285.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:06.272Z,1478864286.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:06.287Z,1478864286.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:06.673Z,1478864286.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:06.688Z,1478864286.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:07.077Z,1478864287.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:07.093Z,1478864287.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:07.468Z,1478864287.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:07.489Z,1478864287.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:07.877Z,1478864287.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:07.893Z,1478864287.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:08.269Z,1478864288.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:08.284Z,1478864288.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:08.677Z,1478864288.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:08.693Z,1478864288.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:09.069Z,1478864289.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:09.084Z,1478864289.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:09.472Z,1478864289.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:09.488Z,1478864289.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:09.873Z,1478864289.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:09.925Z,1478864289.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:10.273Z,1478864290.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:10.289Z,1478864290.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:10.676Z,1478864290.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:10.692Z,1478864290.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:11.072Z,1478864291.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:11.088Z,1478864291.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:11.472Z,1478864291.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:11.513Z,1478864291.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:11.873Z,1478864291.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:11.893Z,1478864291.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:12.272Z,1478864292.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:12.314Z,1478864292.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:12.669Z,1478864292.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:12.685Z,1478864292.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:13.068Z,1478864293.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:13.113Z,1478864293.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:13.472Z,1478864293.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:13.488Z,1478864293.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:13.869Z,1478864293.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:13.917Z,1478864293.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:14.276Z,1478864294.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:14.292Z,1478864294.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:14.669Z,1478864294.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:14.684Z,1478864294.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:15.073Z,1478864295.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:15.088Z,1478864295.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:15.470Z,1478864295.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:15.498Z,1478864295.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:15.870Z,1478864295.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:15.901Z,1478864295.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:16.271Z,1478864296.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:16.290Z,1478864296.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:16.671Z,1478864296.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:16.695Z,1478864296.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:17.070Z,1478864297.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:17.095Z,1478864297.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:17.470Z,1478864297.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:17.513Z,1478864297.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:17.875Z,1478864297.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:17.890Z,1478864297.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:18.270Z,1478864298.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:18.317Z,1478864298.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:18.674Z,1478864298.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:18.717Z,1478864298.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:19.070Z,1478864299.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:19.094Z,1478864299.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:19.474Z,1478864299.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:19.505Z,1478864299.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:19.869Z,1478864299.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:19.901Z,1478864299.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:20.270Z,1478864300.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:20.294Z,1478864300.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:20.670Z,1478864300.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:20.697Z,1478864300.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:21.070Z,1478864301.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:21.094Z,1478864301.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:21.470Z,1478864301.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:21.514Z,1478864301.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:21.870Z,1478864301.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:21.906Z,1478864301.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:22.270Z,1478864302.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:22.294Z,1478864302.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:22.674Z,1478864302.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:22.698Z,1478864302.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:23.070Z,1478864303.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:23.105Z,1478864303.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:23.470Z,1478864303.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:23.502Z,1478864303.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:23.896Z,1478864303.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:23.953Z,1478864303.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:24.287Z,1478864304.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:24.347Z,1478864304.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:24.670Z,1478864304.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:24.726Z,1478864304.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:25.068Z,1478864305.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:25.108Z,1478864305.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:25.469Z,1478864305.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:25.497Z,1478864305.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:25.871Z,1478864305.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:25.900Z,1478864305.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:26.269Z,1478864306.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:26.317Z,1478864306.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:26.673Z,1478864306.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:26.697Z,1478864306.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:27.069Z,1478864307.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:27.093Z,1478864307.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:27.469Z,1478864307.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:27.513Z,1478864307.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:27.881Z,1478864307.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:27.905Z,1478864307.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:28.269Z,1478864308.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:28.313Z,1478864308.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:28.677Z,1478864308.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:28.725Z,1478864308.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:29.068Z,1478864309.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:29.112Z,1478864309.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:29.469Z,1478864309.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:29.505Z,1478864309.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:29.872Z,1478864309.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:29.888Z,1478864309.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:30.269Z,1478864310.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:30.285Z,1478864310.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:30.677Z,1478864310.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:30.701Z,1478864310.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:31.080Z,1478864311.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:31.095Z,1478864311.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:31.476Z,1478864311.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:31.491Z,1478864311.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:31.876Z,1478864311.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:31.894Z,1478864311.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:32.276Z,1478864312.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:32.298Z,1478864312.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:32.676Z,1478864312.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:32.697Z,1478864312.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:33.079Z,1478864313.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:33.094Z,1478864313.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:33.484Z,1478864313.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:33.501Z,1478864313.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:33.884Z,1478864313.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:33.899Z,1478864313.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:34.280Z,1478864314.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:34.296Z,1478864314.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:34.676Z,1478864314.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:34.699Z,1478864314.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:35.068Z,1478864315.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:35.101Z,1478864315.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:35.472Z,1478864315.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:35.505Z,1478864315.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:35.873Z,1478864315.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:35.901Z,1478864315.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:36.269Z,1478864316.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:36.305Z,1478864316.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:36.669Z,1478864316.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:36.701Z,1478864316.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:37.077Z,1478864317.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:37.109Z,1478864317.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:37.472Z,1478864317.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:37.505Z,1478864317.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:37.877Z,1478864317.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:37.902Z,1478864317.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:38.273Z,1478864318.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:38.306Z,1478864318.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:38.669Z,1478864318.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:38.684Z,1478864318.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:39.069Z,1478864319.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:39.121Z,1478864319.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:39.470Z,1478864319.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:39.497Z,1478864319.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:42.825Z,1478864322.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:42.891Z,1478864322.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:42.992Z,1478864322.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:43.008Z,1478864323.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:43.357Z,1478864323.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:43.389Z,1478864323.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:43.752Z,1478864323.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:43.805Z,1478864323.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:44.176Z,1478864324.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:44.203Z,1478864324.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:44.556Z,1478864324.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:44.603Z,1478864324.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:44.969Z,1478864324.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:45.014Z,1478864325.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:45.354Z,1478864325.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:45.369Z,1478864325.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:45.752Z,1478864325.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:45.773Z,1478864325.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:46.164Z,1478864326.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:46.180Z,1478864326.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:46.558Z,1478864326.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:46.581Z,1478864326.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:46.960Z,1478864326.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:46.975Z,1478864326.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:47.359Z,1478864327.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:47.374Z,1478864327.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:47.766Z,1478864327.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:47.782Z,1478864327.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:48.163Z,1478864328.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:48.179Z,1478864328.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:48.564Z,1478864328.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:48.579Z,1478864328.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:48.963Z,1478864328.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:48.979Z,1478864328.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:49.352Z,1478864329.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:49.387Z,1478864329.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:49.752Z,1478864329.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:49.777Z,1478864329.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:50.164Z,1478864330.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:50.180Z,1478864330.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:50.564Z,1478864330.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:50.585Z,1478864330.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:50.953Z,1478864330.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:50.986Z,1478864330.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:51.352Z,1478864331.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:51.384Z,1478864331.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:51.768Z,1478864331.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:51.783Z,1478864331.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:52.159Z,1478864332.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:52.174Z,1478864332.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:52.555Z,1478864332.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:52.587Z,1478864332.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:52.956Z,1478864332.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:52.984Z,1478864332.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:53.363Z,1478864333.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:53.378Z,1478864333.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:53.779Z,1478864333.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:53.836Z,1478864333.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:54.157Z,1478864334.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:54.182Z,1478864334.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:54.557Z,1478864334.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:54.589Z,1478864334.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:54.956Z,1478864334.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:54.989Z,1478864334.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:55.353Z,1478864335.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:55.385Z,1478864335.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:55.752Z,1478864335.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:55.809Z,1478864335.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:56.154Z,1478864336.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:56.182Z,1478864336.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:56.557Z,1478864336.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:56.593Z,1478864336.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:56.957Z,1478864336.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:57.017Z,1478864337.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:57.353Z,1478864337.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:57.381Z,1478864337.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:57.763Z,1478864337.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:57.815Z,1478864337.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:58.162Z,1478864338.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:58.189Z,1478864338.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:58.560Z,1478864338.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:58.618Z,1478864338.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:58.981Z,1478864338.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:59.041Z,1478864339.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:59.352Z,1478864339.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:59.379Z,1478864339.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:38:59.753Z,1478864339.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:38:59.777Z,1478864339.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:00.167Z,1478864340.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:00.186Z,1478864340.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:00.552Z,1478864340.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:00.586Z,1478864340.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:00.964Z,1478864340.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:00.979Z,1478864340.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:01.372Z,1478864341.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:01.396Z,1478864341.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:01.761Z,1478864341.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:01.797Z,1478864341.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:02.153Z,1478864342.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:02.173Z,1478864342.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:02.556Z,1478864342.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:02.572Z,1478864342.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:02.960Z,1478864342.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:02.975Z,1478864342.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:03.358Z,1478864343.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:03.374Z,1478864343.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:03.764Z,1478864343.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:03.780Z,1478864343.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:04.159Z,1478864344.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:04.174Z,1478864344.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:04.559Z,1478864344.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:04.575Z,1478864344.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:04.966Z,1478864344.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:04.982Z,1478864344.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:05.363Z,1478864345.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:05.385Z,1478864345.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:05.768Z,1478864345.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:05.783Z,1478864345.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:06.157Z,1478864346.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:06.182Z,1478864346.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:06.557Z,1478864346.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:06.589Z,1478864346.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:06.953Z,1478864346.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:06.979Z,1478864346.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:07.353Z,1478864347.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:07.386Z,1478864347.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:07.770Z,1478864347.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:07.818Z,1478864347.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:08.157Z,1478864348.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:08.193Z,1478864348.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:08.557Z,1478864348.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:08.593Z,1478864348.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:08.954Z,1478864348.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:08.970Z,1478864348.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:09.357Z,1478864349.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:09.405Z,1478864349.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:09.759Z,1478864349.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:09.775Z,1478864349.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:10.154Z,1478864350.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:10.162Z,1478864350.162 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T11:39:10.162Z,1478864350.162 [BPC1] Data Fault, FailCount= 1
2016-11-11T11:39:10.162Z,1478864350.162 [BPC1](ERROR): Data Fault
2016-11-11T11:39:10.170Z,1478864350.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:10.223Z,1478864350.223 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T11:39:10.561Z,1478864350.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:10.577Z,1478864350.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:10.964Z,1478864350.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:10.994Z,1478864350.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:11.359Z,1478864351.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:11.374Z,1478864351.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:11.394Z,1478864351.394 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:39:11.394Z,1478864351.394 [BPC1] No Fault, FailCount= 1
2016-11-11T11:39:11.752Z,1478864351.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:11.837Z,1478864351.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:12.153Z,1478864352.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:12.217Z,1478864352.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:12.552Z,1478864352.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:12.586Z,1478864352.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:12.953Z,1478864352.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:12.979Z,1478864352.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:13.364Z,1478864353.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:13.386Z,1478864353.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:13.763Z,1478864353.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:13.785Z,1478864353.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:14.160Z,1478864354.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:14.182Z,1478864354.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:14.552Z,1478864354.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:14.586Z,1478864354.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:14.963Z,1478864354.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:14.985Z,1478864354.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:15.352Z,1478864355.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:15.393Z,1478864355.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:15.772Z,1478864355.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:15.793Z,1478864355.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:16.152Z,1478864356.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:16.186Z,1478864356.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:16.553Z,1478864356.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:16.589Z,1478864356.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:16.957Z,1478864356.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:16.982Z,1478864356.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:17.352Z,1478864357.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:17.388Z,1478864357.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:17.761Z,1478864357.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:17.786Z,1478864357.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:18.152Z,1478864358.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:18.195Z,1478864358.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:18.552Z,1478864358.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:18.588Z,1478864358.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:18.953Z,1478864358.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:18.984Z,1478864358.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:19.361Z,1478864359.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:19.385Z,1478864359.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:19.386Z,1478864359.385 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 117
2016-11-11T11:39:19.386Z,1478864359.386 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:39:19.392Z,1478864359.392 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:19.392Z,1478864359.392 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 117
2016-11-11T11:39:19.392Z,1478864359.392 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:39:19.394Z,1478864359.394 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:19.394Z,1478864359.394 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 117
2016-11-11T11:39:19.394Z,1478864359.394 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:39:19.408Z,1478864359.408 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:39:19.408Z,1478864359.408 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:39:19.409Z,1478864359.409 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:39:19.753Z,1478864359.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:19.822Z,1478864359.822 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:39:19.822Z,1478864359.822 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 117
2016-11-11T11:39:19.827Z,1478864359.827 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:39:19.827Z,1478864359.827 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 117
2016-11-11T11:39:19.828Z,1478864359.828 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:39:19.828Z,1478864359.828 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 117
2016-11-11T11:39:20.153Z,1478864360.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:20.176Z,1478864360.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:39:20.177Z,1478864360.177 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:39:20.177Z,1478864360.177 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:39:20.186Z,1478864360.186 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:39:20.186Z,1478864360.186 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:39:20.187Z,1478864360.187 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:39:20.191Z,1478864360.191 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:39:20.192Z,1478864360.192 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:39:20.192Z,1478864360.192 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:39:20.559Z,1478864360.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:20.574Z,1478864360.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:20.959Z,1478864360.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:20.974Z,1478864360.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:21.364Z,1478864361.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:21.379Z,1478864361.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:21.760Z,1478864361.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:21.785Z,1478864361.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:22.153Z,1478864362.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:22.185Z,1478864362.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:22.557Z,1478864362.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:22.589Z,1478864362.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:22.953Z,1478864362.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:23.016Z,1478864363.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:23.352Z,1478864363.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:23.396Z,1478864363.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:23.757Z,1478864363.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:23.793Z,1478864363.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:24.152Z,1478864364.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:24.196Z,1478864364.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:24.553Z,1478864364.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:24.617Z,1478864364.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:24.960Z,1478864364.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:24.976Z,1478864364.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:25.356Z,1478864365.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:25.406Z,1478864365.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:25.760Z,1478864365.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:25.775Z,1478864365.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:26.156Z,1478864366.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:26.208Z,1478864366.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:26.557Z,1478864366.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:26.605Z,1478864366.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:26.960Z,1478864366.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:26.981Z,1478864366.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:27.359Z,1478864367.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:27.375Z,1478864367.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:27.759Z,1478864367.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:27.781Z,1478864367.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:28.156Z,1478864368.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:28.178Z,1478864368.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:28.559Z,1478864368.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:28.574Z,1478864368.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:28.967Z,1478864368.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:28.982Z,1478864368.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:29.360Z,1478864369.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:29.381Z,1478864369.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:29.764Z,1478864369.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:29.780Z,1478864369.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:30.159Z,1478864370.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:30.174Z,1478864370.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:30.559Z,1478864370.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:30.574Z,1478864370.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:30.962Z,1478864370.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:30.978Z,1478864370.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:31.359Z,1478864371.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:31.374Z,1478864371.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:31.760Z,1478864371.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:31.780Z,1478864371.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:32.160Z,1478864372.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:32.176Z,1478864372.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:32.563Z,1478864372.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:32.578Z,1478864372.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:32.963Z,1478864372.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:32.982Z,1478864372.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:33.360Z,1478864373.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:33.376Z,1478864373.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:33.756Z,1478864373.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:33.780Z,1478864373.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:34.160Z,1478864374.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:34.188Z,1478864374.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:34.563Z,1478864374.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:34.579Z,1478864374.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:34.975Z,1478864374.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:34.990Z,1478864374.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:35.360Z,1478864375.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:35.382Z,1478864375.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:35.753Z,1478864375.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:35.778Z,1478864375.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:36.153Z,1478864376.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:36.193Z,1478864376.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:36.557Z,1478864376.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:36.582Z,1478864376.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:36.953Z,1478864376.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:37.009Z,1478864377.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:37.352Z,1478864377.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:37.388Z,1478864377.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:37.765Z,1478864377.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:37.790Z,1478864377.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:38.153Z,1478864378.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:38.180Z,1478864378.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:38.553Z,1478864378.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:38.617Z,1478864378.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:38.965Z,1478864378.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:38.980Z,1478864378.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:39.360Z,1478864379.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:39.376Z,1478864379.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:39.760Z,1478864379.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:39.807Z,1478864379.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:43.109Z,1478864383.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:43.125Z,1478864383.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:43.233Z,1478864383.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:43.281Z,1478864383.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:43.630Z,1478864383.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:43.693Z,1478864383.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:44.023Z,1478864384.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:44.038Z,1478864384.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:44.419Z,1478864384.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:44.434Z,1478864384.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:44.776Z,1478864384.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:44.822Z,1478864384.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:44.837Z,1478864384.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:45.215Z,1478864385.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:45.241Z,1478864385.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:45.573Z,1478864385.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:45.628Z,1478864385.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:45.655Z,1478864385.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:45.984Z,1478864385.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:46.016Z,1478864386.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:46.049Z,1478864386.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:46.420Z,1478864386.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:46.441Z,1478864386.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:46.780Z,1478864386.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:46.822Z,1478864386.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:46.838Z,1478864386.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:47.212Z,1478864387.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:47.245Z,1478864387.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:47.577Z,1478864387.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:47.614Z,1478864387.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:47.649Z,1478864387.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:47.998Z,1478864387.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:48.013Z,1478864388.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:48.050Z,1478864388.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:48.412Z,1478864388.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:48.449Z,1478864388.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:48.792Z,1478864388.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:48.812Z,1478864388.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:48.851Z,1478864388.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:49.213Z,1478864389.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:49.244Z,1478864389.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:49.600Z,1478864389.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:49.625Z,1478864389.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:49.694Z,1478864389.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:50.054Z,1478864390.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:50.076Z,1478864390.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:50.110Z,1478864390.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:50.428Z,1478864390.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:50.475Z,1478864390.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:50.823Z,1478864390.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:50.839Z,1478864390.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:50.872Z,1478864390.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:51.229Z,1478864391.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:51.245Z,1478864391.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:51.620Z,1478864391.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:51.652Z,1478864391.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:51.676Z,1478864391.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:52.062Z,1478864392.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:52.085Z,1478864392.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:52.420Z,1478864392.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:52.428Z,1478864392.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:52.437Z,1478864392.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:52.820Z,1478864392.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:52.836Z,1478864392.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:53.225Z,1478864393.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:53.227Z,1478864393.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:53.243Z,1478864393.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:53.629Z,1478864393.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:53.644Z,1478864393.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:54.021Z,1478864394.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:54.091Z,1478864394.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:54.131Z,1478864394.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:54.417Z,1478864394.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:54.442Z,1478864394.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:54.452Z,1478864394.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:54.828Z,1478864394.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:54.889Z,1478864394.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:55.225Z,1478864395.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:55.248Z,1478864395.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:55.261Z,1478864395.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:55.647Z,1478864395.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:55.677Z,1478864395.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:55.944Z,1478864395.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:56.025Z,1478864396.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:56.073Z,1478864396.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:56.420Z,1478864396.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:56.436Z,1478864396.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:56.824Z,1478864396.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:56.840Z,1478864396.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:56.895Z,1478864396.895 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T11:39:56.896Z,1478864396.895 [NAL9602] No Fault, FailCount= 5
2016-11-11T11:39:57.201Z,1478864397.201 [NAL9602](INFO): Powering up NAL9602
2016-11-11T11:39:57.226Z,1478864397.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:57.277Z,1478864397.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:57.631Z,1478864397.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:57.646Z,1478864397.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:58.021Z,1478864398.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:58.074Z,1478864398.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:58.424Z,1478864398.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:58.479Z,1478864398.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:58.821Z,1478864398.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:58.837Z,1478864398.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:59.213Z,1478864399.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:59.245Z,1478864399.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:39:59.621Z,1478864399.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:39:59.645Z,1478864399.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:00.021Z,1478864400.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:00.053Z,1478864400.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:00.413Z,1478864400.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:00.456Z,1478864400.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:00.812Z,1478864400.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:00.853Z,1478864400.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:01.221Z,1478864401.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:01.237Z,1478864401.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:01.617Z,1478864401.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:01.637Z,1478864401.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:02.036Z,1478864402.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:02.101Z,1478864402.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:02.413Z,1478864402.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:02.445Z,1478864402.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:02.813Z,1478864402.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:02.845Z,1478864402.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:03.216Z,1478864403.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:03.250Z,1478864403.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:03.662Z,1478864403.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:03.709Z,1478864403.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:04.019Z,1478864404.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:04.041Z,1478864404.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:04.421Z,1478864404.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:04.441Z,1478864404.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:04.820Z,1478864404.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:04.835Z,1478864404.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:05.221Z,1478864405.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:05.236Z,1478864405.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:05.623Z,1478864405.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:05.643Z,1478864405.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:06.036Z,1478864406.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:06.080Z,1478864406.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:06.407Z,1478864406.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:06.418Z,1478864406.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:06.450Z,1478864406.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:06.854Z,1478864406.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:06.906Z,1478864406.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:07.200Z,1478864407.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:07.226Z,1478864407.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:07.262Z,1478864407.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:07.642Z,1478864407.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:07.657Z,1478864407.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:08.025Z,1478864408.025 [NAL9602](INFO): NAL9602 initialized
2016-11-11T11:40:08.043Z,1478864408.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:08.098Z,1478864408.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:08.427Z,1478864408.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:08.443Z,1478864408.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:08.836Z,1478864408.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:08.873Z,1478864408.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:09.233Z,1478864409.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:09.285Z,1478864409.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:09.633Z,1478864409.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:09.648Z,1478864409.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:10.033Z,1478864410.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:10.049Z,1478864410.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:10.433Z,1478864410.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:10.489Z,1478864410.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:10.845Z,1478864410.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:10.893Z,1478864410.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:11.224Z,1478864411.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:11.289Z,1478864411.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:11.644Z,1478864411.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:11.660Z,1478864411.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:12.048Z,1478864412.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:12.100Z,1478864412.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:12.461Z,1478864412.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:12.505Z,1478864412.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:12.825Z,1478864412.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:12.840Z,1478864412.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:13.221Z,1478864413.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:13.236Z,1478864413.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:13.625Z,1478864413.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:13.640Z,1478864413.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:14.020Z,1478864414.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:14.036Z,1478864414.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:14.426Z,1478864414.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:14.441Z,1478864414.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:14.816Z,1478864414.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:14.849Z,1478864414.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:15.213Z,1478864415.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:15.248Z,1478864415.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:15.613Z,1478864415.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:15.641Z,1478864415.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:16.036Z,1478864416.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:16.052Z,1478864416.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:16.431Z,1478864416.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:16.449Z,1478864416.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:16.836Z,1478864416.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:16.852Z,1478864416.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:17.228Z,1478864417.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:17.255Z,1478864417.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:17.658Z,1478864417.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:17.698Z,1478864417.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:18.014Z,1478864418.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:18.030Z,1478864418.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:18.417Z,1478864418.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:18.437Z,1478864418.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:18.820Z,1478864418.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:18.821Z,1478864418.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:18.836Z,1478864418.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:19.221Z,1478864419.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:19.237Z,1478864419.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:19.616Z,1478864419.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:19.618Z,1478864419.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:19.641Z,1478864419.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:20.018Z,1478864420.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:20.054Z,1478864420.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:20.372Z,1478864420.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:20.422Z,1478864420.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:20.446Z,1478864420.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:20.817Z,1478864420.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:20.839Z,1478864420.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:21.168Z,1478864421.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:21.232Z,1478864421.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:21.248Z,1478864421.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:21.632Z,1478864421.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:21.648Z,1478864421.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:21.966Z,1478864421.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:22.036Z,1478864422.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:22.061Z,1478864422.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:22.380Z,1478864422.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:22.438Z,1478864422.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:22.454Z,1478864422.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:22.814Z,1478864422.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:22.845Z,1478864422.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:23.217Z,1478864423.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:23.277Z,1478864423.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:23.646Z,1478864423.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:23.705Z,1478864423.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:24.029Z,1478864424.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:24.065Z,1478864424.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:24.421Z,1478864424.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:24.461Z,1478864424.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:24.817Z,1478864424.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:24.885Z,1478864424.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:25.226Z,1478864425.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:25.242Z,1478864425.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:25.632Z,1478864425.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:25.648Z,1478864425.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:26.024Z,1478864426.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:26.066Z,1478864426.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:26.436Z,1478864426.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:26.452Z,1478864426.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:26.836Z,1478864426.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:26.883Z,1478864426.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:27.243Z,1478864427.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:27.292Z,1478864427.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:27.660Z,1478864427.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:27.700Z,1478864427.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:28.021Z,1478864428.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:28.048Z,1478864428.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:28.421Z,1478864428.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:28.456Z,1478864428.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:28.834Z,1478864428.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:28.857Z,1478864428.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:29.262Z,1478864429.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:29.301Z,1478864429.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:29.621Z,1478864429.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:29.658Z,1478864429.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:30.018Z,1478864430.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:30.033Z,1478864430.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:30.421Z,1478864430.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:30.461Z,1478864430.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:30.817Z,1478864430.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:30.832Z,1478864430.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:31.222Z,1478864431.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:31.237Z,1478864431.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:31.645Z,1478864431.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:31.682Z,1478864431.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:32.027Z,1478864432.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:32.049Z,1478864432.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:32.432Z,1478864432.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:32.481Z,1478864432.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:32.827Z,1478864432.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:32.851Z,1478864432.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:33.221Z,1478864433.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:33.241Z,1478864433.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:33.618Z,1478864433.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:33.650Z,1478864433.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:34.013Z,1478864434.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:34.049Z,1478864434.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:34.413Z,1478864434.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:34.445Z,1478864434.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:34.814Z,1478864434.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:34.841Z,1478864434.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:35.213Z,1478864435.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:35.249Z,1478864435.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:35.613Z,1478864435.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:35.633Z,1478864435.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:36.030Z,1478864436.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:36.066Z,1478864436.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:36.418Z,1478864436.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:36.433Z,1478864436.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:36.827Z,1478864436.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:36.849Z,1478864436.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:37.232Z,1478864437.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:37.248Z,1478864437.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:37.630Z,1478864437.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:37.646Z,1478864437.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:38.031Z,1478864438.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:38.046Z,1478864438.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:38.414Z,1478864438.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:38.449Z,1478864438.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:38.813Z,1478864438.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:38.845Z,1478864438.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:39.213Z,1478864439.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:39.249Z,1478864439.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:39.614Z,1478864439.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:39.669Z,1478864439.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:40.022Z,1478864440.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:40.054Z,1478864440.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:43.651Z,1478864443.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:43.701Z,1478864443.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:43.812Z,1478864443.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:43.850Z,1478864443.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:44.172Z,1478864444.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:44.221Z,1478864444.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:44.564Z,1478864444.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:44.608Z,1478864444.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:44.967Z,1478864444.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:44.983Z,1478864444.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:45.356Z,1478864445.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:45.377Z,1478864445.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:45.765Z,1478864445.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:45.785Z,1478864445.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:46.152Z,1478864446.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:46.184Z,1478864446.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:46.549Z,1478864446.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:46.583Z,1478864446.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:46.957Z,1478864446.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:46.981Z,1478864446.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:47.349Z,1478864447.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:47.381Z,1478864447.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:47.760Z,1478864447.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:47.781Z,1478864447.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:48.166Z,1478864448.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:48.182Z,1478864448.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:48.570Z,1478864448.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:48.590Z,1478864448.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:48.970Z,1478864448.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:48.985Z,1478864448.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:49.368Z,1478864449.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:49.400Z,1478864449.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:49.760Z,1478864449.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:49.793Z,1478864449.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:50.149Z,1478864450.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:50.192Z,1478864450.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:50.550Z,1478864450.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:50.590Z,1478864450.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:50.950Z,1478864450.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:50.982Z,1478864450.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:51.355Z,1478864451.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:51.370Z,1478864451.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:51.762Z,1478864451.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:51.786Z,1478864451.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:52.149Z,1478864452.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:52.182Z,1478864452.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:52.553Z,1478864452.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:52.578Z,1478864452.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:52.950Z,1478864452.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:52.985Z,1478864452.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:53.349Z,1478864453.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:53.385Z,1478864453.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:53.772Z,1478864453.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:53.801Z,1478864453.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:54.172Z,1478864454.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:54.201Z,1478864454.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:54.564Z,1478864454.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:54.580Z,1478864454.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:54.964Z,1478864454.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:54.979Z,1478864454.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:55.358Z,1478864455.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:55.386Z,1478864455.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:55.749Z,1478864455.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:55.782Z,1478864455.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:56.149Z,1478864456.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:56.174Z,1478864456.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:56.550Z,1478864456.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:56.630Z,1478864456.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:56.950Z,1478864456.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:56.982Z,1478864456.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:57.349Z,1478864457.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:57.405Z,1478864457.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:57.754Z,1478864457.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:57.785Z,1478864457.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:58.154Z,1478864458.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:58.201Z,1478864458.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:58.554Z,1478864458.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:58.606Z,1478864458.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:58.972Z,1478864458.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:59.005Z,1478864459.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:59.368Z,1478864459.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:59.400Z,1478864459.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:40:59.776Z,1478864459.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:40:59.801Z,1478864459.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:00.172Z,1478864460.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:00.205Z,1478864460.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:00.558Z,1478864460.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:00.574Z,1478864460.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:00.756Z,1478864460.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:00.959Z,1478864460.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:00.974Z,1478864460.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:01.356Z,1478864461.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:01.384Z,1478864461.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:01.553Z,1478864461.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:01.749Z,1478864461.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:01.776Z,1478864461.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:02.149Z,1478864462.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:02.186Z,1478864462.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:02.549Z,1478864462.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:02.586Z,1478864462.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:02.950Z,1478864462.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:02.978Z,1478864462.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:03.349Z,1478864463.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:03.388Z,1478864463.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:03.749Z,1478864463.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:03.788Z,1478864463.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:04.172Z,1478864464.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:04.197Z,1478864464.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:04.571Z,1478864464.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:04.588Z,1478864464.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:04.964Z,1478864464.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:05.001Z,1478864465.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:05.360Z,1478864465.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:05.433Z,1478864465.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:05.752Z,1478864465.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:05.773Z,1478864465.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:06.156Z,1478864466.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:06.171Z,1478864466.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:06.560Z,1478864466.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:06.575Z,1478864466.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:06.966Z,1478864466.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:06.981Z,1478864466.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:07.357Z,1478864467.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:07.377Z,1478864467.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:07.761Z,1478864467.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:07.784Z,1478864467.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:08.149Z,1478864468.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:08.182Z,1478864468.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:08.549Z,1478864468.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:08.584Z,1478864468.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:08.950Z,1478864468.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:08.981Z,1478864468.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:09.367Z,1478864469.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:09.430Z,1478864469.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:09.764Z,1478864469.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:09.806Z,1478864469.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:10.168Z,1478864470.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:10.206Z,1478864470.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:10.564Z,1478864470.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:10.654Z,1478864470.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:10.957Z,1478864470.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:10.972Z,1478864470.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:11.352Z,1478864471.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:11.413Z,1478864471.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:11.759Z,1478864471.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:11.775Z,1478864471.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:12.157Z,1478864472.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:12.211Z,1478864472.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:12.552Z,1478864472.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:12.582Z,1478864472.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:12.966Z,1478864472.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:13.023Z,1478864473.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:13.358Z,1478864473.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:13.373Z,1478864473.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:13.765Z,1478864473.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:13.785Z,1478864473.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:14.161Z,1478864474.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:14.181Z,1478864474.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:14.572Z,1478864474.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:14.589Z,1478864474.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:14.968Z,1478864474.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:14.998Z,1478864474.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:15.372Z,1478864475.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:15.389Z,1478864475.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:15.772Z,1478864475.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:15.792Z,1478864475.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:16.152Z,1478864476.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:16.182Z,1478864476.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:16.556Z,1478864476.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:16.577Z,1478864476.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:16.958Z,1478864476.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:16.973Z,1478864476.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:17.365Z,1478864477.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:17.382Z,1478864477.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:17.765Z,1478864477.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:17.785Z,1478864477.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:18.149Z,1478864478.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:18.164Z,1478864478.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:18.553Z,1478864478.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:18.591Z,1478864478.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:18.954Z,1478864478.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:18.970Z,1478864478.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:19.353Z,1478864479.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:19.368Z,1478864479.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:19.776Z,1478864479.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:19.806Z,1478864479.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:20.164Z,1478864480.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:20.192Z,1478864480.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:20.564Z,1478864480.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:20.597Z,1478864480.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:20.964Z,1478864480.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:20.988Z,1478864480.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:21.352Z,1478864481.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:21.405Z,1478864481.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:21.766Z,1478864481.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:21.781Z,1478864481.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:22.161Z,1478864482.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:22.184Z,1478864482.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:22.553Z,1478864482.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:22.585Z,1478864482.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:22.950Z,1478864482.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:22.982Z,1478864482.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:23.349Z,1478864483.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:23.418Z,1478864483.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:23.749Z,1478864483.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:23.789Z,1478864483.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:24.149Z,1478864484.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:24.165Z,1478864484.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:24.553Z,1478864484.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:24.603Z,1478864484.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:24.968Z,1478864484.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:25.058Z,1478864485.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:25.377Z,1478864485.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:25.458Z,1478864485.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:25.771Z,1478864485.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:25.833Z,1478864485.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:26.164Z,1478864486.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:26.186Z,1478864486.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:26.549Z,1478864486.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:26.602Z,1478864486.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:26.954Z,1478864486.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:27.019Z,1478864487.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:27.353Z,1478864487.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:27.401Z,1478864487.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:27.749Z,1478864487.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:27.794Z,1478864487.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:28.149Z,1478864488.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:28.190Z,1478864488.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:28.549Z,1478864488.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:28.593Z,1478864488.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:28.950Z,1478864488.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:28.994Z,1478864488.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:29.349Z,1478864489.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:29.387Z,1478864489.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:29.753Z,1478864489.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:29.770Z,1478864489.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:30.174Z,1478864490.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:30.193Z,1478864490.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:30.566Z,1478864490.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:30.611Z,1478864490.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:30.966Z,1478864490.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:30.991Z,1478864490.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:31.373Z,1478864491.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:31.389Z,1478864491.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:31.753Z,1478864491.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:31.793Z,1478864491.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:32.149Z,1478864492.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:32.192Z,1478864492.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:32.549Z,1478864492.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:32.597Z,1478864492.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:32.950Z,1478864492.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:32.967Z,1478864492.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:33.349Z,1478864493.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:33.443Z,1478864493.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:33.757Z,1478864493.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:33.782Z,1478864493.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:34.157Z,1478864494.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:34.181Z,1478864494.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:34.552Z,1478864494.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:34.589Z,1478864494.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:34.967Z,1478864494.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:34.998Z,1478864494.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:35.405Z,1478864495.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:35.447Z,1478864495.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:35.764Z,1478864495.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:35.805Z,1478864495.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:36.170Z,1478864496.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:36.204Z,1478864496.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:36.569Z,1478864496.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:36.593Z,1478864496.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:36.950Z,1478864496.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:36.975Z,1478864496.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:37.366Z,1478864497.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:37.458Z,1478864497.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:37.758Z,1478864497.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:37.777Z,1478864497.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:38.159Z,1478864498.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:38.175Z,1478864498.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:38.556Z,1478864498.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:38.590Z,1478864498.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:38.953Z,1478864498.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:39.029Z,1478864499.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:39.363Z,1478864499.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:39.441Z,1478864499.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:39.753Z,1478864499.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:39.798Z,1478864499.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:40.149Z,1478864500.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:40.191Z,1478864500.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:43.512Z,1478864503.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:43.584Z,1478864503.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:43.677Z,1478864503.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:43.709Z,1478864503.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:44.064Z,1478864504.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:44.109Z,1478864504.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:44.452Z,1478864504.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:44.473Z,1478864504.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:44.850Z,1478864504.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:44.877Z,1478864504.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:45.249Z,1478864505.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:45.269Z,1478864505.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:45.650Z,1478864505.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:45.665Z,1478864505.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:46.037Z,1478864506.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:46.063Z,1478864506.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:46.453Z,1478864506.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:46.468Z,1478864506.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:46.837Z,1478864506.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:46.872Z,1478864506.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:47.237Z,1478864507.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:47.269Z,1478864507.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:47.646Z,1478864507.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:47.677Z,1478864507.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:48.045Z,1478864508.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:48.060Z,1478864508.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:48.456Z,1478864508.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:48.496Z,1478864508.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:48.852Z,1478864508.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:48.868Z,1478864508.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:49.252Z,1478864509.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:49.273Z,1478864509.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:49.655Z,1478864509.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:49.670Z,1478864509.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:50.049Z,1478864510.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:50.072Z,1478864510.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:50.437Z,1478864510.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:50.469Z,1478864510.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:50.837Z,1478864510.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:50.873Z,1478864510.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:51.238Z,1478864511.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:51.269Z,1478864511.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:51.637Z,1478864511.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:51.677Z,1478864511.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:52.041Z,1478864512.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:52.057Z,1478864512.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:52.442Z,1478864512.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:52.457Z,1478864512.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:52.844Z,1478864512.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:52.859Z,1478864512.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:53.245Z,1478864513.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:53.261Z,1478864513.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:53.667Z,1478864513.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:53.682Z,1478864513.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:54.056Z,1478864514.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:54.079Z,1478864514.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:54.459Z,1478864514.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:54.475Z,1478864514.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:54.852Z,1478864514.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:54.878Z,1478864514.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:55.242Z,1478864515.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:55.274Z,1478864515.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:55.637Z,1478864515.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:55.673Z,1478864515.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:56.037Z,1478864516.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:56.093Z,1478864516.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:56.438Z,1478864516.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:56.501Z,1478864516.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:56.838Z,1478864516.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:56.862Z,1478864516.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:57.245Z,1478864517.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:57.299Z,1478864517.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:57.646Z,1478864517.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:57.661Z,1478864517.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:58.045Z,1478864518.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:58.099Z,1478864518.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:58.448Z,1478864518.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:58.500Z,1478864518.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:58.851Z,1478864518.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:58.873Z,1478864518.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:59.252Z,1478864519.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:59.283Z,1478864519.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:41:59.657Z,1478864519.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:41:59.681Z,1478864519.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:00.048Z,1478864520.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:00.074Z,1478864520.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:00.438Z,1478864520.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:00.477Z,1478864520.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:00.837Z,1478864520.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:00.857Z,1478864520.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:01.250Z,1478864521.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:01.293Z,1478864521.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:01.637Z,1478864521.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:01.670Z,1478864521.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:02.041Z,1478864522.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:02.067Z,1478864522.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:02.438Z,1478864522.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:02.473Z,1478864522.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:02.838Z,1478864522.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:02.873Z,1478864522.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:03.241Z,1478864523.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:03.273Z,1478864523.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:03.646Z,1478864523.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:03.682Z,1478864523.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:04.052Z,1478864524.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:04.085Z,1478864524.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:04.448Z,1478864524.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:04.476Z,1478864524.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:04.871Z,1478864524.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:04.886Z,1478864524.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:05.256Z,1478864525.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:05.280Z,1478864525.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:05.652Z,1478864525.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:05.668Z,1478864525.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:06.046Z,1478864526.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:06.065Z,1478864526.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:06.439Z,1478864526.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:06.471Z,1478864526.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:06.838Z,1478864526.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:06.874Z,1478864526.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:07.238Z,1478864527.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:07.266Z,1478864527.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:07.637Z,1478864527.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:07.673Z,1478864527.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:08.037Z,1478864528.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:08.069Z,1478864528.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:08.445Z,1478864528.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:08.474Z,1478864528.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:08.841Z,1478864528.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:08.858Z,1478864528.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:09.252Z,1478864529.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:09.289Z,1478864529.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:09.665Z,1478864529.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:09.697Z,1478864529.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:10.056Z,1478864530.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:10.089Z,1478864530.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:10.452Z,1478864530.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:10.526Z,1478864530.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:10.844Z,1478864530.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:10.860Z,1478864530.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:11.242Z,1478864531.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:11.265Z,1478864531.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:11.648Z,1478864531.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:11.705Z,1478864531.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:12.044Z,1478864532.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:12.069Z,1478864532.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:12.440Z,1478864532.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:12.498Z,1478864532.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:12.837Z,1478864532.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:12.878Z,1478864532.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:13.242Z,1478864533.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:13.278Z,1478864533.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:13.641Z,1478864533.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:13.661Z,1478864533.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:14.049Z,1478864534.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:14.064Z,1478864534.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:14.452Z,1478864534.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:14.467Z,1478864534.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:14.848Z,1478864534.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:14.864Z,1478864534.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:15.252Z,1478864535.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:15.273Z,1478864535.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:15.661Z,1478864535.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:15.681Z,1478864535.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:16.038Z,1478864536.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:16.073Z,1478864536.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:16.437Z,1478864536.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:16.457Z,1478864536.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:16.838Z,1478864536.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:16.857Z,1478864536.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:17.238Z,1478864537.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:17.257Z,1478864537.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:17.644Z,1478864537.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:17.681Z,1478864537.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:18.041Z,1478864538.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:18.068Z,1478864538.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:18.437Z,1478864538.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:18.469Z,1478864538.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:18.837Z,1478864538.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:18.873Z,1478864538.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:19.237Z,1478864539.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:19.273Z,1478864539.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:19.652Z,1478864539.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:19.688Z,1478864539.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:20.048Z,1478864540.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:20.081Z,1478864540.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:20.456Z,1478864540.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:20.489Z,1478864540.489 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:20.489Z,1478864540.489 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 118
2016-11-11T11:42:20.489Z,1478864540.489 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:42:20.495Z,1478864540.496 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:20.496Z,1478864540.496 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 118
2016-11-11T11:42:20.496Z,1478864540.496 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:42:20.498Z,1478864540.498 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:20.498Z,1478864540.498 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 118
2016-11-11T11:42:20.498Z,1478864540.498 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:42:20.536Z,1478864540.536 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:42:20.536Z,1478864540.536 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:42:20.536Z,1478864540.536 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:42:20.848Z,1478864540.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:20.902Z,1478864540.902 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:42:20.902Z,1478864540.902 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 118
2016-11-11T11:42:20.902Z,1478864540.902 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:42:20.902Z,1478864540.902 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 118
2016-11-11T11:42:20.907Z,1478864540.907 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:42:20.907Z,1478864540.907 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 118
2016-11-11T11:42:21.243Z,1478864541.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:21.320Z,1478864541.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:42:21.321Z,1478864541.321 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:42:21.322Z,1478864541.322 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:42:21.353Z,1478864541.353 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:42:21.353Z,1478864541.353 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:42:21.354Z,1478864541.353 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:42:21.354Z,1478864541.354 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:42:21.354Z,1478864541.354 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:42:21.355Z,1478864541.355 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:42:21.650Z,1478864541.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:21.666Z,1478864541.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:22.048Z,1478864542.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:22.064Z,1478864542.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:22.449Z,1478864542.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:22.464Z,1478864542.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:22.845Z,1478864542.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:22.865Z,1478864542.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:23.237Z,1478864543.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:23.269Z,1478864543.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:23.646Z,1478864543.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:23.671Z,1478864543.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:24.038Z,1478864544.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:24.069Z,1478864544.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:24.437Z,1478864544.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:24.498Z,1478864544.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:24.860Z,1478864544.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:24.876Z,1478864544.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:25.248Z,1478864545.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:25.304Z,1478864545.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:25.656Z,1478864545.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:25.700Z,1478864545.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:26.054Z,1478864546.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:26.069Z,1478864546.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:26.437Z,1478864546.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:26.482Z,1478864546.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:26.837Z,1478864546.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:26.872Z,1478864546.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:27.237Z,1478864547.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:27.289Z,1478864547.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:27.638Z,1478864547.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:27.689Z,1478864547.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:28.045Z,1478864548.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:28.060Z,1478864548.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:28.448Z,1478864548.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:28.464Z,1478864548.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:28.845Z,1478864548.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:28.868Z,1478864548.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:29.240Z,1478864549.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:29.322Z,1478864549.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:29.637Z,1478864549.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:29.663Z,1478864549.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:30.063Z,1478864550.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:30.082Z,1478864550.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:30.452Z,1478864550.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:30.476Z,1478864550.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:30.860Z,1478864550.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:30.880Z,1478864550.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:31.260Z,1478864551.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:31.339Z,1478864551.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:31.640Z,1478864551.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:31.665Z,1478864551.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:32.047Z,1478864552.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:32.100Z,1478864552.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:32.449Z,1478864552.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:32.475Z,1478864552.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:32.847Z,1478864552.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:32.880Z,1478864552.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:33.248Z,1478864553.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:33.360Z,1478864553.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:33.671Z,1478864553.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:33.701Z,1478864553.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:34.039Z,1478864554.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:34.085Z,1478864554.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:34.446Z,1478864554.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:34.497Z,1478864554.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:34.848Z,1478864554.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:34.868Z,1478864554.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:35.264Z,1478864555.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:35.372Z,1478864555.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:35.649Z,1478864555.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:35.694Z,1478864555.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:36.058Z,1478864556.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:36.090Z,1478864556.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:36.453Z,1478864556.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:36.474Z,1478864556.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:36.847Z,1478864556.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:36.873Z,1478864556.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:37.249Z,1478864557.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:37.276Z,1478864557.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:37.643Z,1478864557.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:37.684Z,1478864557.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:38.037Z,1478864558.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:38.060Z,1478864558.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:38.440Z,1478864558.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:38.482Z,1478864558.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:38.838Z,1478864558.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:38.878Z,1478864558.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:39.239Z,1478864559.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:39.288Z,1478864559.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:39.326Z,1478864559.326 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T11:37:39.1Z
2016-11-11T11:42:39.326Z,1478864559.326 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T11:42:39.326Z,1478864559.326 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T11:42:39.644Z,1478864559.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:39.807Z,1478864559.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:41.027Z,1478864561.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:41.069Z,1478864561.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:41.185Z,1478864561.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:41.217Z,1478864561.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:45.427Z,1478864565.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:45.507Z,1478864565.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:45.626Z,1478864565.626 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20161111T044527/Courier0160.lzma
2016-11-11T11:42:45.711Z,1478864565.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:45.758Z,1478864565.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:46.062Z,1478864566.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:46.125Z,1478864566.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:46.413Z,1478864566.413 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0160.lzma.bak
2016-11-11T11:42:46.413Z,1478864566.413 [DataOverHttps](INFO): SBD MOMSN=4555370
2016-11-11T11:42:46.476Z,1478864566.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:46.498Z,1478864566.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:48.700Z,1478864568.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:48.772Z,1478864568.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:48.877Z,1478864568.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:48.918Z,1478864568.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:54.160Z,1478864574.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:54.956Z,1478864574.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:56.370Z,1478864576.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:56.428Z,1478864576.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:56.559Z,1478864576.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:56.591Z,1478864576.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:56.932Z,1478864576.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:56.974Z,1478864576.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:57.342Z,1478864577.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:57.381Z,1478864577.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:57.726Z,1478864577.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:57.746Z,1478864577.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:42:58.128Z,1478864578.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:42:58.156Z,1478864578.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:03.356Z,1478864583.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:03.434Z,1478864583.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:25.780Z,1478864605.780 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0161.lzma
2016-11-11T11:43:25.825Z,1478864605.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:25.844Z,1478864605.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:25.945Z,1478864605.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:25.977Z,1478864605.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:26.273Z,1478864606.273 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0161.lzma.bak
2016-11-11T11:43:26.273Z,1478864606.273 [DataOverHttps](INFO): SBD MOMSN=4555373
2016-11-11T11:43:26.297Z,1478864606.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:26.345Z,1478864606.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:28.495Z,1478864608.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:28.512Z,1478864608.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:28.520Z,1478864608.520 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T11:43:28.521Z,1478864608.520 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T11:43:28.521Z,1478864608.520 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T11:43:28.609Z,1478864608.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:28.665Z,1478864608.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:32.272Z,1478864612.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:32.321Z,1478864612.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:32.440Z,1478864612.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:32.460Z,1478864612.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:32.820Z,1478864612.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:32.835Z,1478864612.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:33.216Z,1478864613.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:33.231Z,1478864613.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:33.605Z,1478864613.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:33.638Z,1478864613.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:34.013Z,1478864614.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:34.033Z,1478864614.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:34.401Z,1478864614.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:34.436Z,1478864614.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:34.801Z,1478864614.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:34.833Z,1478864614.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:35.202Z,1478864615.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:35.233Z,1478864615.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:35.606Z,1478864615.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:35.692Z,1478864615.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:36.009Z,1478864616.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:36.029Z,1478864616.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:36.407Z,1478864616.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:36.429Z,1478864616.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:36.816Z,1478864616.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:36.837Z,1478864616.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:37.213Z,1478864617.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:37.233Z,1478864617.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:37.608Z,1478864617.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:37.693Z,1478864617.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:38.009Z,1478864618.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:38.025Z,1478864618.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:38.401Z,1478864618.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:38.427Z,1478864618.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:38.822Z,1478864618.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:38.838Z,1478864618.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:39.224Z,1478864619.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:39.261Z,1478864619.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:39.609Z,1478864619.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:39.645Z,1478864619.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:40.005Z,1478864620.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:40.021Z,1478864620.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:40.410Z,1478864620.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:40.430Z,1478864620.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:40.808Z,1478864620.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:40.829Z,1478864620.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:41.217Z,1478864621.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:41.241Z,1478864621.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:41.605Z,1478864621.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:41.639Z,1478864621.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:42.001Z,1478864622.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:42.034Z,1478864622.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:42.402Z,1478864622.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:42.429Z,1478864622.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:42.806Z,1478864622.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:42.845Z,1478864622.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:43.215Z,1478864623.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:43.260Z,1478864623.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:43.602Z,1478864623.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:43.618Z,1478864623.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:44.014Z,1478864624.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:44.030Z,1478864624.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:44.405Z,1478864624.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:44.477Z,1478864624.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:44.808Z,1478864624.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:44.823Z,1478864624.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:45.224Z,1478864625.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:45.298Z,1478864625.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:45.601Z,1478864625.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:45.634Z,1478864625.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:46.001Z,1478864626.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:46.053Z,1478864626.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:46.402Z,1478864626.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:46.431Z,1478864626.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:46.802Z,1478864626.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:46.853Z,1478864626.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:47.201Z,1478864627.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:47.278Z,1478864627.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:47.616Z,1478864627.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:47.648Z,1478864627.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:48.012Z,1478864628.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:48.033Z,1478864628.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:48.408Z,1478864628.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:48.429Z,1478864628.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:48.801Z,1478864628.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:48.834Z,1478864628.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:49.201Z,1478864629.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:49.234Z,1478864629.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:49.619Z,1478864629.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:49.684Z,1478864629.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:50.006Z,1478864630.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:50.021Z,1478864630.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:50.406Z,1478864630.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:50.422Z,1478864630.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:50.808Z,1478864630.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:50.823Z,1478864630.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:51.206Z,1478864631.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:51.234Z,1478864631.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:51.629Z,1478864631.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:51.710Z,1478864631.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:52.023Z,1478864632.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:52.038Z,1478864632.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:52.428Z,1478864632.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:52.444Z,1478864632.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:52.801Z,1478864632.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:52.837Z,1478864632.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:53.204Z,1478864633.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:53.253Z,1478864633.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:53.610Z,1478864633.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:53.625Z,1478864633.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:54.005Z,1478864634.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:54.024Z,1478864634.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:54.414Z,1478864634.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:54.429Z,1478864634.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:54.810Z,1478864634.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:54.838Z,1478864634.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:55.218Z,1478864635.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:55.259Z,1478864635.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:55.601Z,1478864635.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:55.629Z,1478864635.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:56.023Z,1478864636.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:56.047Z,1478864636.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:56.426Z,1478864636.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:56.453Z,1478864636.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:56.812Z,1478864636.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:56.847Z,1478864636.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:57.231Z,1478864637.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:57.246Z,1478864637.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:57.602Z,1478864637.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:57.618Z,1478864637.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:58.002Z,1478864638.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:58.017Z,1478864638.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:58.411Z,1478864638.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:58.443Z,1478864638.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:58.809Z,1478864638.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:58.873Z,1478864638.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:59.218Z,1478864639.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:59.240Z,1478864639.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:43:59.608Z,1478864639.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:43:59.659Z,1478864639.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:00.009Z,1478864640.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:00.026Z,1478864640.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:00.410Z,1478864640.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:00.477Z,1478864640.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:00.822Z,1478864640.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:00.873Z,1478864640.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:01.233Z,1478864641.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:01.286Z,1478864641.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:01.631Z,1478864641.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:01.648Z,1478864641.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:02.025Z,1478864642.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:02.042Z,1478864642.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:02.401Z,1478864642.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:02.441Z,1478864642.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:02.801Z,1478864642.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:02.821Z,1478864642.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:03.201Z,1478864643.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:03.221Z,1478864643.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:03.644Z,1478864643.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:03.674Z,1478864643.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:04.007Z,1478864644.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:04.023Z,1478864644.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:04.409Z,1478864644.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:04.424Z,1478864644.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:04.805Z,1478864644.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:04.833Z,1478864644.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:05.208Z,1478864645.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:05.229Z,1478864645.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:05.636Z,1478864645.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:05.673Z,1478864645.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:06.052Z,1478864646.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:06.077Z,1478864646.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:06.427Z,1478864646.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:06.442Z,1478864646.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:06.823Z,1478864646.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:06.852Z,1478864646.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:07.201Z,1478864647.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:07.237Z,1478864647.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:07.609Z,1478864647.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:07.642Z,1478864647.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:08.005Z,1478864648.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:08.045Z,1478864648.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:08.401Z,1478864648.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:08.421Z,1478864648.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:08.801Z,1478864648.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:08.821Z,1478864648.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:09.209Z,1478864649.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:09.229Z,1478864649.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:09.607Z,1478864649.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:09.623Z,1478864649.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:10.025Z,1478864650.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:10.060Z,1478864650.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:10.405Z,1478864650.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:10.427Z,1478864650.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:10.816Z,1478864650.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:10.853Z,1478864650.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:11.219Z,1478864651.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:11.235Z,1478864651.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:11.601Z,1478864651.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:11.627Z,1478864651.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:12.001Z,1478864652.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:12.027Z,1478864652.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:12.405Z,1478864652.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:12.437Z,1478864652.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:12.802Z,1478864652.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:12.883Z,1478864652.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:13.232Z,1478864653.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:13.253Z,1478864653.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:13.738Z,1478864653.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:13.764Z,1478864653.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:14.005Z,1478864654.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:14.020Z,1478864654.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:14.406Z,1478864654.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:14.433Z,1478864654.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:14.808Z,1478864654.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:14.822Z,1478864654.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:15.251Z,1478864655.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:15.291Z,1478864655.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:15.601Z,1478864655.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:15.621Z,1478864655.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:16.009Z,1478864656.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:16.018Z,1478864656.018 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:44:16.018Z,1478864656.018 [BPC1] Communications Fault, FailCount= 1
2016-11-11T11:44:16.018Z,1478864656.018 [BPC1](ERROR): Communications Fault
2016-11-11T11:44:16.026Z,1478864656.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:16.088Z,1478864656.088 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:44:16.409Z,1478864656.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:16.425Z,1478864656.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:16.813Z,1478864656.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:16.828Z,1478864656.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:17.238Z,1478864657.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:17.271Z,1478864657.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:17.290Z,1478864657.290 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:44:17.290Z,1478864657.290 [BPC1] No Fault, FailCount= 1
2016-11-11T11:44:17.615Z,1478864657.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:17.749Z,1478864657.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:18.004Z,1478864658.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:18.061Z,1478864658.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:18.401Z,1478864658.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:18.451Z,1478864658.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:18.801Z,1478864658.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:18.827Z,1478864658.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:19.213Z,1478864659.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:19.233Z,1478864659.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:19.616Z,1478864659.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:19.639Z,1478864659.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:20.008Z,1478864660.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:20.024Z,1478864660.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:20.413Z,1478864660.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:20.428Z,1478864660.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:20.809Z,1478864660.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:20.824Z,1478864660.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:21.201Z,1478864661.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:21.227Z,1478864661.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:21.602Z,1478864661.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:21.666Z,1478864661.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:22.024Z,1478864662.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:22.039Z,1478864662.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:22.416Z,1478864662.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:22.444Z,1478864662.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:22.816Z,1478864662.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:22.831Z,1478864662.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:23.218Z,1478864663.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:23.269Z,1478864663.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:23.601Z,1478864663.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:23.633Z,1478864663.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:24.000Z,1478864664.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:24.053Z,1478864664.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:24.401Z,1478864664.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:24.428Z,1478864664.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:24.802Z,1478864664.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:24.866Z,1478864664.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:25.201Z,1478864665.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:25.272Z,1478864665.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:25.601Z,1478864665.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:25.633Z,1478864665.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:26.021Z,1478864666.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:26.073Z,1478864666.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:26.420Z,1478864666.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:26.449Z,1478864666.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:26.802Z,1478864666.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:26.834Z,1478864666.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:27.213Z,1478864667.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:27.233Z,1478864667.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:27.605Z,1478864667.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:27.626Z,1478864667.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:28.010Z,1478864668.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:28.029Z,1478864668.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:28.404Z,1478864668.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:28.432Z,1478864668.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:28.821Z,1478864668.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:28.841Z,1478864668.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:29.225Z,1478864669.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:29.258Z,1478864669.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:32.648Z,1478864672.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:32.685Z,1478864672.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:32.797Z,1478864672.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:32.821Z,1478864672.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:33.146Z,1478864673.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:33.162Z,1478864673.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:33.606Z,1478864673.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:33.646Z,1478864673.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:33.950Z,1478864673.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:33.978Z,1478864673.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:34.349Z,1478864674.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:34.374Z,1478864674.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:34.737Z,1478864674.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:34.764Z,1478864674.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:35.142Z,1478864675.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:35.162Z,1478864675.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:35.546Z,1478864675.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:35.562Z,1478864675.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:35.945Z,1478864675.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:35.997Z,1478864675.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:36.345Z,1478864676.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:36.361Z,1478864676.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:36.745Z,1478864676.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:36.761Z,1478864676.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:37.148Z,1478864677.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:37.213Z,1478864677.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:37.541Z,1478864677.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:37.561Z,1478864677.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:37.941Z,1478864677.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:37.961Z,1478864677.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:38.347Z,1478864678.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:38.397Z,1478864678.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:38.743Z,1478864678.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:38.759Z,1478864678.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:39.152Z,1478864679.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:39.197Z,1478864679.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:39.548Z,1478864679.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:39.591Z,1478864679.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:39.945Z,1478864679.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:39.961Z,1478864679.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:40.352Z,1478864680.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:40.367Z,1478864680.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:40.740Z,1478864680.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:40.772Z,1478864680.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:41.143Z,1478864681.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:41.171Z,1478864681.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:41.545Z,1478864681.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:41.576Z,1478864681.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:41.938Z,1478864681.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:41.962Z,1478864681.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:42.346Z,1478864682.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:42.362Z,1478864682.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:42.746Z,1478864682.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:42.761Z,1478864682.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:43.150Z,1478864683.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:43.223Z,1478864683.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:43.556Z,1478864683.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:43.589Z,1478864683.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:43.951Z,1478864683.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:43.985Z,1478864683.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:44.340Z,1478864684.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:44.373Z,1478864684.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:44.745Z,1478864684.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:44.760Z,1478864684.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:45.152Z,1478864685.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:45.169Z,1478864685.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:45.544Z,1478864685.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:45.605Z,1478864685.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:45.941Z,1478864685.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:45.979Z,1478864685.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:46.338Z,1478864686.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:46.374Z,1478864686.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:46.741Z,1478864686.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:46.773Z,1478864686.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:47.141Z,1478864687.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:47.173Z,1478864687.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:47.583Z,1478864687.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:47.630Z,1478864687.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:47.941Z,1478864687.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:47.965Z,1478864687.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:48.340Z,1478864688.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:48.369Z,1478864688.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:48.740Z,1478864688.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:48.773Z,1478864688.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:49.165Z,1478864689.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:49.209Z,1478864689.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:49.545Z,1478864689.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:49.573Z,1478864689.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:49.938Z,1478864689.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:49.969Z,1478864689.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:50.337Z,1478864690.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:50.397Z,1478864690.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:50.742Z,1478864690.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:50.779Z,1478864690.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:51.141Z,1478864691.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:51.169Z,1478864691.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:51.537Z,1478864691.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:51.597Z,1478864691.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:51.973Z,1478864691.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:51.993Z,1478864691.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:52.352Z,1478864692.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:52.378Z,1478864692.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:52.737Z,1478864692.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:52.782Z,1478864692.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:53.160Z,1478864693.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:53.180Z,1478864693.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:53.537Z,1478864693.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:53.593Z,1478864693.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:53.937Z,1478864693.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:53.989Z,1478864693.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:54.337Z,1478864694.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:54.377Z,1478864694.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:54.737Z,1478864694.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:54.757Z,1478864694.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:55.153Z,1478864695.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:55.176Z,1478864695.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:55.549Z,1478864695.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:55.580Z,1478864695.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:55.944Z,1478864695.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:55.976Z,1478864695.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:56.352Z,1478864696.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:56.375Z,1478864696.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:56.756Z,1478864696.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:56.782Z,1478864696.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:57.206Z,1478864697.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:57.244Z,1478864697.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:57.540Z,1478864697.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:57.568Z,1478864697.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:57.948Z,1478864697.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:57.986Z,1478864697.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:58.338Z,1478864698.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:58.372Z,1478864698.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:58.737Z,1478864698.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:58.769Z,1478864698.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:59.141Z,1478864699.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:59.173Z,1478864699.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:59.553Z,1478864699.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:59.589Z,1478864699.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:44:59.938Z,1478864699.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:44:59.962Z,1478864699.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:00.352Z,1478864700.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:00.386Z,1478864700.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:00.766Z,1478864700.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:00.782Z,1478864700.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:01.137Z,1478864701.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:01.173Z,1478864701.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:01.563Z,1478864701.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:01.591Z,1478864701.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:01.951Z,1478864701.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:01.975Z,1478864701.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:02.342Z,1478864702.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:02.368Z,1478864702.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:02.749Z,1478864702.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:02.773Z,1478864702.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:03.140Z,1478864703.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:03.170Z,1478864703.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:03.540Z,1478864703.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:03.573Z,1478864703.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:03.947Z,1478864703.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:03.975Z,1478864703.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:04.337Z,1478864704.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:04.369Z,1478864704.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:04.737Z,1478864704.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:04.773Z,1478864704.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:05.145Z,1478864705.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:05.221Z,1478864705.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:05.546Z,1478864705.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:05.593Z,1478864705.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:05.942Z,1478864705.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:05.993Z,1478864705.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:06.348Z,1478864706.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:06.364Z,1478864706.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:06.750Z,1478864706.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:06.765Z,1478864706.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:07.144Z,1478864707.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:07.189Z,1478864707.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:07.545Z,1478864707.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:07.577Z,1478864707.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:07.938Z,1478864707.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:07.982Z,1478864707.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:08.337Z,1478864708.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:08.383Z,1478864708.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:08.752Z,1478864708.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:08.785Z,1478864708.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:09.148Z,1478864709.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:09.180Z,1478864709.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:09.542Z,1478864709.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:09.558Z,1478864709.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:09.944Z,1478864709.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:09.960Z,1478864709.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:10.341Z,1478864710.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:10.365Z,1478864710.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:10.745Z,1478864710.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:10.794Z,1478864710.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:11.170Z,1478864711.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:11.202Z,1478864711.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:11.525Z,1478864711.525 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T11:45:11.542Z,1478864711.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:11.574Z,1478864711.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:11.937Z,1478864711.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:11.977Z,1478864711.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:12.341Z,1478864712.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:12.356Z,1478864712.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:12.741Z,1478864712.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:12.761Z,1478864712.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:13.141Z,1478864713.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:13.161Z,1478864713.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:13.549Z,1478864713.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:13.581Z,1478864713.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:13.945Z,1478864713.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:13.965Z,1478864713.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:14.345Z,1478864714.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:14.360Z,1478864714.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:14.741Z,1478864714.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:14.764Z,1478864714.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:15.149Z,1478864715.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:15.169Z,1478864715.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:15.543Z,1478864715.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:15.590Z,1478864715.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:15.938Z,1478864715.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:15.982Z,1478864715.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:16.337Z,1478864716.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:16.357Z,1478864716.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:16.747Z,1478864716.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:16.762Z,1478864716.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:17.120Z,1478864717.120 [NAL9602](INFO): Powering down
2016-11-11T11:45:17.142Z,1478864717.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:17.174Z,1478864717.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:17.548Z,1478864717.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:17.564Z,1478864717.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:17.951Z,1478864717.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:17.970Z,1478864717.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:18.352Z,1478864718.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:18.380Z,1478864718.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:18.737Z,1478864718.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:18.762Z,1478864718.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:19.137Z,1478864719.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:19.189Z,1478864719.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:19.537Z,1478864719.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:19.569Z,1478864719.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:19.941Z,1478864719.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:19.966Z,1478864719.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:20.337Z,1478864720.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:20.397Z,1478864720.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:20.741Z,1478864720.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:20.756Z,1478864720.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:21.149Z,1478864721.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:21.199Z,1478864721.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:21.543Z,1478864721.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:21.565Z,1478864721.565 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:21.565Z,1478864721.565 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 119
2016-11-11T11:45:21.565Z,1478864721.565 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:45:21.572Z,1478864721.572 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:21.572Z,1478864721.572 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 119
2016-11-11T11:45:21.572Z,1478864721.572 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:45:21.574Z,1478864721.574 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:21.574Z,1478864721.574 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 119
2016-11-11T11:45:21.574Z,1478864721.574 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:45:21.629Z,1478864721.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:45:21.629Z,1478864721.629 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:45:21.630Z,1478864721.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:45:21.938Z,1478864721.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:22.038Z,1478864722.038 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:45:22.038Z,1478864722.038 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 119
2016-11-11T11:45:22.047Z,1478864722.047 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:45:22.047Z,1478864722.047 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 119
2016-11-11T11:45:22.048Z,1478864722.048 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:45:22.048Z,1478864722.048 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 119
2016-11-11T11:45:22.337Z,1478864722.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:22.368Z,1478864722.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:45:22.369Z,1478864722.369 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:45:22.369Z,1478864722.369 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:45:22.374Z,1478864722.374 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:45:22.375Z,1478864722.375 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:45:22.375Z,1478864722.375 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:45:22.375Z,1478864722.375 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:45:22.376Z,1478864722.376 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:45:22.376Z,1478864722.376 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:45:22.737Z,1478864722.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:22.783Z,1478864722.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:23.145Z,1478864723.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:23.171Z,1478864723.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:23.541Z,1478864723.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:23.589Z,1478864723.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:23.938Z,1478864723.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:23.965Z,1478864723.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:24.345Z,1478864724.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:24.360Z,1478864724.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:24.748Z,1478864724.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:24.763Z,1478864724.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:25.149Z,1478864725.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:25.190Z,1478864725.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:25.537Z,1478864725.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:25.561Z,1478864725.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:25.937Z,1478864725.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:25.980Z,1478864725.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:26.337Z,1478864726.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:26.352Z,1478864726.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:26.737Z,1478864726.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:26.757Z,1478864726.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:27.145Z,1478864727.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:27.166Z,1478864727.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:27.542Z,1478864727.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:27.577Z,1478864727.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:27.948Z,1478864727.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:27.964Z,1478864727.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:28.341Z,1478864728.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:28.356Z,1478864728.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:28.737Z,1478864728.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:28.764Z,1478864728.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:29.137Z,1478864729.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:29.157Z,1478864729.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:29.551Z,1478864729.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:29.581Z,1478864729.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:32.901Z,1478864732.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:32.916Z,1478864732.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:33.068Z,1478864733.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:33.104Z,1478864733.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:33.472Z,1478864733.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:33.488Z,1478864733.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:33.864Z,1478864733.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:33.900Z,1478864733.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:34.261Z,1478864734.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:34.300Z,1478864734.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:34.657Z,1478864734.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:34.741Z,1478864734.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:35.069Z,1478864735.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:35.124Z,1478864735.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:35.465Z,1478864735.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:35.521Z,1478864735.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:35.861Z,1478864735.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:35.881Z,1478864735.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:36.266Z,1478864736.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:36.320Z,1478864736.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:36.663Z,1478864736.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:36.713Z,1478864736.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:37.071Z,1478864737.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:37.109Z,1478864737.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:37.466Z,1478864737.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:37.481Z,1478864737.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:37.868Z,1478864737.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:37.884Z,1478864737.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:38.267Z,1478864738.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:38.282Z,1478864738.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:38.657Z,1478864738.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:38.703Z,1478864738.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:39.062Z,1478864739.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:39.162Z,1478864739.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:39.461Z,1478864739.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:39.481Z,1478864739.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:39.870Z,1478864739.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:39.885Z,1478864739.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:40.257Z,1478864740.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:40.281Z,1478864740.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:40.658Z,1478864740.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:40.677Z,1478864740.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:41.058Z,1478864741.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:41.077Z,1478864741.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:41.498Z,1478864741.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:41.534Z,1478864741.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:41.862Z,1478864741.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:41.899Z,1478864741.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:42.257Z,1478864742.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:42.295Z,1478864742.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:42.658Z,1478864742.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:42.674Z,1478864742.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:43.065Z,1478864743.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:43.080Z,1478864743.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:43.482Z,1478864743.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:43.518Z,1478864743.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:43.860Z,1478864743.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:43.885Z,1478864743.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:44.267Z,1478864744.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:44.282Z,1478864744.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:44.664Z,1478864744.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:44.680Z,1478864744.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:45.057Z,1478864745.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:45.083Z,1478864745.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:45.457Z,1478864745.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:45.494Z,1478864745.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:45.857Z,1478864745.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:45.890Z,1478864745.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:46.257Z,1478864746.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:46.294Z,1478864746.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:46.664Z,1478864746.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:46.695Z,1478864746.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:47.068Z,1478864747.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:47.094Z,1478864747.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:47.457Z,1478864747.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:47.496Z,1478864747.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:47.857Z,1478864747.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:47.917Z,1478864747.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:48.257Z,1478864748.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:48.277Z,1478864748.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:48.657Z,1478864748.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:48.672Z,1478864748.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:49.061Z,1478864749.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:49.113Z,1478864749.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:49.465Z,1478864749.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:49.485Z,1478864749.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:49.860Z,1478864749.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:49.909Z,1478864749.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:50.264Z,1478864750.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:50.285Z,1478864750.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:50.664Z,1478864750.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:50.717Z,1478864750.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:51.068Z,1478864751.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:51.133Z,1478864751.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:51.457Z,1478864751.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:51.489Z,1478864751.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:51.857Z,1478864751.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:51.897Z,1478864751.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:52.257Z,1478864752.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:52.290Z,1478864752.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:52.661Z,1478864752.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:52.686Z,1478864752.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:53.077Z,1478864753.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:53.139Z,1478864753.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:53.457Z,1478864753.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:53.472Z,1478864753.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:53.516Z,1478864753.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:53.857Z,1478864753.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:53.877Z,1478864753.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:54.257Z,1478864754.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:54.272Z,1478864754.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:54.312Z,1478864754.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:54.657Z,1478864754.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:54.680Z,1478864754.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:55.057Z,1478864755.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:55.077Z,1478864755.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:55.466Z,1478864755.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:55.523Z,1478864755.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:55.566Z,1478864755.566 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T11:45:55.857Z,1478864755.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:55.907Z,1478864755.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:56.261Z,1478864756.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:56.317Z,1478864756.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:56.657Z,1478864756.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:56.672Z,1478864756.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:57.060Z,1478864757.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:57.076Z,1478864757.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:57.463Z,1478864757.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:57.509Z,1478864757.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:57.864Z,1478864757.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:57.879Z,1478864757.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:58.267Z,1478864758.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:58.283Z,1478864758.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:58.669Z,1478864758.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:58.689Z,1478864758.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:59.065Z,1478864759.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:59.085Z,1478864759.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:59.457Z,1478864759.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:59.489Z,1478864759.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:45:59.857Z,1478864759.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:45:59.889Z,1478864759.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:00.257Z,1478864760.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:00.289Z,1478864760.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:00.657Z,1478864760.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:00.689Z,1478864760.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:01.057Z,1478864761.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:01.083Z,1478864761.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:01.457Z,1478864761.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:01.482Z,1478864761.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:01.857Z,1478864761.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:01.883Z,1478864761.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:02.257Z,1478864762.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:02.289Z,1478864762.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:02.657Z,1478864762.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:02.677Z,1478864762.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:03.069Z,1478864763.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:03.084Z,1478864763.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:03.467Z,1478864763.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:03.517Z,1478864763.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:03.864Z,1478864763.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:03.878Z,1478864763.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:04.264Z,1478864764.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:04.280Z,1478864764.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:04.664Z,1478864764.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:04.687Z,1478864764.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:05.072Z,1478864765.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:05.088Z,1478864765.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:05.457Z,1478864765.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:05.489Z,1478864765.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:05.864Z,1478864765.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:05.887Z,1478864765.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:06.257Z,1478864766.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:06.275Z,1478864766.275 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:46:06.275Z,1478864766.276 [BPC1] Communications Fault, FailCount= 1
2016-11-11T11:46:06.276Z,1478864766.276 [BPC1](ERROR): Communications Fault
2016-11-11T11:46:06.308Z,1478864766.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:06.342Z,1478864766.342 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:46:06.657Z,1478864766.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:06.697Z,1478864766.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:07.070Z,1478864767.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:07.125Z,1478864767.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:07.457Z,1478864767.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:07.477Z,1478864767.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:07.569Z,1478864767.569 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:46:07.569Z,1478864767.569 [BPC1] No Fault, FailCount= 1
2016-11-11T11:46:07.864Z,1478864767.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:07.956Z,1478864767.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:08.260Z,1478864768.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:08.309Z,1478864768.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:08.664Z,1478864768.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:08.685Z,1478864768.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:09.065Z,1478864769.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:09.081Z,1478864769.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:09.459Z,1478864769.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:09.478Z,1478864769.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:09.861Z,1478864769.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:09.896Z,1478864769.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:10.257Z,1478864770.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:10.285Z,1478864770.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:10.656Z,1478864770.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:10.706Z,1478864770.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:11.057Z,1478864771.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:11.077Z,1478864771.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:11.476Z,1478864771.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:11.507Z,1478864771.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:11.865Z,1478864771.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:11.885Z,1478864771.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:12.260Z,1478864772.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:12.275Z,1478864772.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:12.666Z,1478864772.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:12.682Z,1478864772.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:13.074Z,1478864773.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:13.089Z,1478864773.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:13.461Z,1478864773.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:13.486Z,1478864773.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:13.857Z,1478864773.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:13.881Z,1478864773.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:14.261Z,1478864774.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:14.295Z,1478864774.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:14.657Z,1478864774.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:14.697Z,1478864774.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:15.065Z,1478864775.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:15.093Z,1478864775.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:15.457Z,1478864775.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:15.495Z,1478864775.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:15.857Z,1478864775.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:15.895Z,1478864775.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:16.257Z,1478864776.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:16.295Z,1478864776.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:16.661Z,1478864776.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:16.700Z,1478864776.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:17.057Z,1478864777.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:17.100Z,1478864777.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:17.457Z,1478864777.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:17.472Z,1478864777.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:17.861Z,1478864777.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:17.881Z,1478864777.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:18.261Z,1478864778.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:18.281Z,1478864778.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:18.664Z,1478864778.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:18.680Z,1478864778.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:19.068Z,1478864779.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:19.129Z,1478864779.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:19.464Z,1478864779.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:19.489Z,1478864779.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:19.865Z,1478864779.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:19.886Z,1478864779.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:20.257Z,1478864780.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:20.316Z,1478864780.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:20.657Z,1478864780.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:20.694Z,1478864780.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:21.072Z,1478864781.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:21.132Z,1478864781.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:21.457Z,1478864781.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:21.486Z,1478864781.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:21.861Z,1478864781.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:21.910Z,1478864781.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:22.258Z,1478864782.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:22.299Z,1478864782.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:22.657Z,1478864782.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:22.672Z,1478864782.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:23.061Z,1478864783.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:23.081Z,1478864783.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:23.465Z,1478864783.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:23.481Z,1478864783.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:23.864Z,1478864783.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:23.879Z,1478864783.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:24.257Z,1478864784.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:24.300Z,1478864784.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:24.657Z,1478864784.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:24.677Z,1478864784.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:25.062Z,1478864785.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:25.085Z,1478864785.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:25.464Z,1478864785.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:25.479Z,1478864785.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:25.859Z,1478864785.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:25.894Z,1478864785.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:26.264Z,1478864786.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:26.285Z,1478864786.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:26.657Z,1478864786.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:26.691Z,1478864786.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:27.057Z,1478864787.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:27.102Z,1478864787.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:27.461Z,1478864787.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:27.486Z,1478864787.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:27.857Z,1478864787.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:27.893Z,1478864787.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:28.257Z,1478864788.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:28.285Z,1478864788.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:28.657Z,1478864788.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:28.713Z,1478864788.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:29.065Z,1478864789.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:29.129Z,1478864789.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:29.464Z,1478864789.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:29.485Z,1478864789.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:29.864Z,1478864789.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:29.882Z,1478864789.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:33.330Z,1478864793.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:33.389Z,1478864793.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:33.486Z,1478864793.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:33.525Z,1478864793.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:33.853Z,1478864793.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:33.906Z,1478864793.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:34.249Z,1478864794.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:34.264Z,1478864794.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:34.649Z,1478864794.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:34.674Z,1478864794.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:35.059Z,1478864795.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:35.105Z,1478864795.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:35.456Z,1478864795.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:35.477Z,1478864795.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:35.858Z,1478864795.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:35.915Z,1478864795.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:36.257Z,1478864796.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:36.315Z,1478864796.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:36.656Z,1478864796.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:36.671Z,1478864796.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:37.061Z,1478864797.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:37.081Z,1478864797.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:37.449Z,1478864797.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:37.474Z,1478864797.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:37.849Z,1478864797.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:37.874Z,1478864797.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:38.249Z,1478864798.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:38.281Z,1478864798.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:38.656Z,1478864798.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:38.679Z,1478864798.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:39.049Z,1478864799.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:39.085Z,1478864799.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:39.454Z,1478864799.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:39.474Z,1478864799.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:39.859Z,1478864799.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:39.883Z,1478864799.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:40.249Z,1478864800.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:40.283Z,1478864800.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:40.649Z,1478864800.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:40.685Z,1478864800.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:41.049Z,1478864801.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:41.097Z,1478864801.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:41.448Z,1478864801.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:41.485Z,1478864801.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:41.856Z,1478864801.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:41.917Z,1478864801.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:42.257Z,1478864802.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:42.272Z,1478864802.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:42.656Z,1478864802.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:42.671Z,1478864802.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:43.056Z,1478864803.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:43.071Z,1478864803.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:43.453Z,1478864803.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:43.485Z,1478864803.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:43.849Z,1478864803.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:43.883Z,1478864803.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:44.249Z,1478864804.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:44.264Z,1478864804.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:44.653Z,1478864804.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:44.689Z,1478864804.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:45.054Z,1478864805.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:45.070Z,1478864805.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:45.449Z,1478864805.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:45.473Z,1478864805.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:45.856Z,1478864805.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:45.871Z,1478864805.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:46.256Z,1478864806.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:46.271Z,1478864806.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:46.656Z,1478864806.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:46.671Z,1478864806.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:47.067Z,1478864807.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:47.083Z,1478864807.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:47.449Z,1478864807.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:47.474Z,1478864807.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:47.849Z,1478864807.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:47.884Z,1478864807.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:48.249Z,1478864808.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:48.309Z,1478864808.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:48.649Z,1478864808.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:48.676Z,1478864808.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:49.054Z,1478864809.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:49.082Z,1478864809.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:49.453Z,1478864809.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:49.505Z,1478864809.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:49.855Z,1478864809.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:49.869Z,1478864809.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:50.256Z,1478864810.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:50.309Z,1478864810.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:50.653Z,1478864810.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:50.705Z,1478864810.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:51.057Z,1478864811.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:51.073Z,1478864811.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:51.454Z,1478864811.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:51.470Z,1478864811.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:51.851Z,1478864811.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:51.885Z,1478864811.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:52.256Z,1478864812.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:52.271Z,1478864812.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:52.656Z,1478864812.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:52.680Z,1478864812.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:53.056Z,1478864813.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:53.087Z,1478864813.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:53.449Z,1478864813.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:53.474Z,1478864813.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:53.849Z,1478864813.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:53.881Z,1478864813.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:54.248Z,1478864814.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:54.280Z,1478864814.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:54.649Z,1478864814.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:54.685Z,1478864814.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:55.049Z,1478864815.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:55.086Z,1478864815.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:55.450Z,1478864815.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:55.478Z,1478864815.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:55.849Z,1478864815.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:55.895Z,1478864815.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:56.250Z,1478864816.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:56.266Z,1478864816.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:56.650Z,1478864816.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:56.665Z,1478864816.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:57.054Z,1478864817.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:57.077Z,1478864817.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:57.453Z,1478864817.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:57.469Z,1478864817.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:57.857Z,1478864817.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:57.873Z,1478864817.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:58.255Z,1478864818.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:58.271Z,1478864818.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:58.656Z,1478864818.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:58.673Z,1478864818.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:59.064Z,1478864819.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:59.085Z,1478864819.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:59.456Z,1478864819.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:59.478Z,1478864819.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:46:59.849Z,1478864819.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:46:59.882Z,1478864819.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:00.253Z,1478864820.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:00.286Z,1478864820.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:00.657Z,1478864820.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:00.689Z,1478864820.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:01.049Z,1478864821.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:01.085Z,1478864821.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:01.449Z,1478864821.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:01.485Z,1478864821.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:01.849Z,1478864821.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:01.876Z,1478864821.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:02.254Z,1478864822.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:02.333Z,1478864822.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:02.656Z,1478864822.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:02.677Z,1478864822.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:03.056Z,1478864823.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:03.126Z,1478864823.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:03.451Z,1478864823.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:03.467Z,1478864823.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:03.856Z,1478864823.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:03.913Z,1478864823.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:04.255Z,1478864824.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:04.304Z,1478864824.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:04.655Z,1478864824.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:04.670Z,1478864824.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:05.057Z,1478864825.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:05.073Z,1478864825.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:05.456Z,1478864825.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:05.477Z,1478864825.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:05.856Z,1478864825.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:05.872Z,1478864825.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:06.257Z,1478864826.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:06.277Z,1478864826.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:06.660Z,1478864826.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:06.676Z,1478864826.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:07.049Z,1478864827.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:07.081Z,1478864827.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:07.449Z,1478864827.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:07.483Z,1478864827.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:07.856Z,1478864827.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:07.879Z,1478864827.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:08.249Z,1478864828.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:08.285Z,1478864828.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:08.649Z,1478864828.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:08.683Z,1478864828.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:09.049Z,1478864829.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:09.083Z,1478864829.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:09.449Z,1478864829.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:09.482Z,1478864829.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:09.849Z,1478864829.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:09.883Z,1478864829.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:10.249Z,1478864830.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:10.301Z,1478864830.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:10.649Z,1478864830.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:10.675Z,1478864830.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:11.049Z,1478864831.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:11.074Z,1478864831.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:11.449Z,1478864831.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:11.489Z,1478864831.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:11.849Z,1478864831.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:11.864Z,1478864831.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:12.249Z,1478864832.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:12.269Z,1478864832.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:12.653Z,1478864832.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:12.673Z,1478864832.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:13.060Z,1478864833.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:13.076Z,1478864833.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:13.468Z,1478864833.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:13.525Z,1478864833.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:13.856Z,1478864833.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:13.871Z,1478864833.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:14.256Z,1478864834.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:14.272Z,1478864834.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:14.652Z,1478864834.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:14.677Z,1478864834.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:15.064Z,1478864835.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:15.080Z,1478864835.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:15.448Z,1478864835.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:15.481Z,1478864835.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:15.849Z,1478864835.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:15.882Z,1478864835.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:16.257Z,1478864836.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:16.345Z,1478864836.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:16.649Z,1478864836.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:16.664Z,1478864836.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:17.057Z,1478864837.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:17.094Z,1478864837.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:17.449Z,1478864837.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:17.509Z,1478864837.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:17.849Z,1478864837.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:17.880Z,1478864837.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:18.249Z,1478864838.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:18.330Z,1478864838.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:18.661Z,1478864838.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:18.725Z,1478864838.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:19.053Z,1478864839.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:19.068Z,1478864839.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:19.454Z,1478864839.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:19.469Z,1478864839.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:19.857Z,1478864839.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:19.872Z,1478864839.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:20.256Z,1478864840.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:20.271Z,1478864840.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:20.656Z,1478864840.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:20.679Z,1478864840.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:21.056Z,1478864841.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:21.079Z,1478864841.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:21.449Z,1478864841.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:21.474Z,1478864841.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:21.856Z,1478864841.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:21.879Z,1478864841.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:22.256Z,1478864842.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:22.279Z,1478864842.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:22.650Z,1478864842.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:22.665Z,1478864842.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:23.057Z,1478864843.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:23.077Z,1478864843.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:23.452Z,1478864843.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:23.474Z,1478864843.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:23.857Z,1478864843.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:23.873Z,1478864843.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:24.257Z,1478864844.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:24.277Z,1478864844.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:24.656Z,1478864844.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:24.679Z,1478864844.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:25.049Z,1478864845.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:25.074Z,1478864845.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:25.449Z,1478864845.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:25.482Z,1478864845.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:25.860Z,1478864845.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:25.881Z,1478864845.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:26.256Z,1478864846.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:26.278Z,1478864846.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:26.659Z,1478864846.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:26.681Z,1478864846.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:27.049Z,1478864847.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:27.074Z,1478864847.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:27.449Z,1478864847.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:27.475Z,1478864847.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:27.849Z,1478864847.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:27.874Z,1478864847.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:28.253Z,1478864848.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:28.289Z,1478864848.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:28.649Z,1478864848.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:28.680Z,1478864848.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:29.057Z,1478864849.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:29.083Z,1478864849.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:29.453Z,1478864849.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:29.485Z,1478864849.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:29.869Z,1478864849.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:29.909Z,1478864849.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:30.254Z,1478864850.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:30.287Z,1478864850.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:34.088Z,1478864854.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:34.201Z,1478864854.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:34.340Z,1478864854.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:34.429Z,1478864854.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:34.715Z,1478864854.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:34.775Z,1478864854.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:35.104Z,1478864855.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:35.161Z,1478864855.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:35.500Z,1478864855.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:35.570Z,1478864855.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:35.891Z,1478864855.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:35.950Z,1478864855.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:36.291Z,1478864856.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:36.334Z,1478864856.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:36.696Z,1478864856.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:36.758Z,1478864856.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:37.101Z,1478864857.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:37.129Z,1478864857.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:37.494Z,1478864857.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:37.537Z,1478864857.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:37.894Z,1478864857.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:37.938Z,1478864857.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:38.301Z,1478864858.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:38.343Z,1478864858.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:38.701Z,1478864858.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:38.729Z,1478864858.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:39.093Z,1478864859.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:39.137Z,1478864859.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:39.491Z,1478864859.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:39.542Z,1478864859.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:39.896Z,1478864859.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:39.943Z,1478864859.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:40.300Z,1478864860.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:40.349Z,1478864860.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:40.699Z,1478864860.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:40.744Z,1478864860.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:41.101Z,1478864861.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:41.122Z,1478864861.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:41.488Z,1478864861.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:41.522Z,1478864861.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:41.891Z,1478864861.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:41.934Z,1478864861.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:42.296Z,1478864862.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:42.340Z,1478864862.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:42.689Z,1478864862.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:42.723Z,1478864862.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:43.106Z,1478864863.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:43.130Z,1478864863.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:43.489Z,1478864863.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:43.513Z,1478864863.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:43.889Z,1478864863.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:43.975Z,1478864863.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:44.304Z,1478864864.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:44.329Z,1478864864.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:44.689Z,1478864864.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:44.729Z,1478864864.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:45.094Z,1478864865.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:45.142Z,1478864865.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:45.501Z,1478864865.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:45.521Z,1478864865.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:45.891Z,1478864865.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:45.977Z,1478864865.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:46.290Z,1478864866.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:46.341Z,1478864866.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:46.689Z,1478864866.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:46.727Z,1478864866.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:47.088Z,1478864867.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:47.145Z,1478864867.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:47.491Z,1478864867.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:47.527Z,1478864867.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:47.910Z,1478864867.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:47.965Z,1478864867.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:48.299Z,1478864868.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:48.314Z,1478864868.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:48.691Z,1478864868.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:48.774Z,1478864868.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:49.091Z,1478864869.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:49.141Z,1478864869.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:49.505Z,1478864869.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:49.547Z,1478864869.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:49.919Z,1478864869.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:49.973Z,1478864869.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:50.300Z,1478864870.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:50.328Z,1478864870.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:50.691Z,1478864870.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:50.741Z,1478864870.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:51.110Z,1478864871.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:51.151Z,1478864871.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:51.524Z,1478864871.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:51.573Z,1478864871.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:51.891Z,1478864871.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:51.917Z,1478864871.917 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:47:51.917Z,1478864871.917 [BPC1] Communications Fault, FailCount= 1
2016-11-11T11:47:51.917Z,1478864871.917 [BPC1](ERROR): Communications Fault
2016-11-11T11:47:51.942Z,1478864871.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:52.019Z,1478864872.019 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:47:52.295Z,1478864872.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:52.313Z,1478864872.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:52.725Z,1478864872.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:52.812Z,1478864872.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:53.100Z,1478864873.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:53.129Z,1478864873.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:53.209Z,1478864873.209 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:47:53.209Z,1478864873.209 [BPC1] No Fault, FailCount= 1
2016-11-11T11:47:53.491Z,1478864873.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:53.626Z,1478864873.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:53.891Z,1478864873.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:53.969Z,1478864873.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:54.291Z,1478864874.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:54.342Z,1478864874.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:54.691Z,1478864874.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:54.755Z,1478864874.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:55.091Z,1478864875.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:55.132Z,1478864875.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:55.491Z,1478864875.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:55.542Z,1478864875.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:55.890Z,1478864875.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:55.945Z,1478864875.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:56.299Z,1478864876.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:56.329Z,1478864876.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:56.691Z,1478864876.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:56.776Z,1478864876.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:57.096Z,1478864877.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:57.132Z,1478864877.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:57.501Z,1478864877.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:57.539Z,1478864877.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:57.897Z,1478864877.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:57.945Z,1478864877.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:58.299Z,1478864878.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:58.340Z,1478864878.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:58.700Z,1478864878.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:58.725Z,1478864878.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:59.091Z,1478864879.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:59.125Z,1478864879.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:59.491Z,1478864879.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:59.528Z,1478864879.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:47:59.891Z,1478864879.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:47:59.933Z,1478864879.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:00.291Z,1478864880.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:00.334Z,1478864880.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:00.697Z,1478864880.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:00.742Z,1478864880.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:01.098Z,1478864881.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:01.121Z,1478864881.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:01.503Z,1478864881.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:01.544Z,1478864881.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:01.894Z,1478864881.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:01.918Z,1478864881.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:02.308Z,1478864882.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:02.332Z,1478864882.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:02.689Z,1478864882.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:02.759Z,1478864882.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:03.108Z,1478864883.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:03.147Z,1478864883.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:03.491Z,1478864883.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:03.529Z,1478864883.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:03.905Z,1478864883.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:03.920Z,1478864883.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:04.304Z,1478864884.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:04.327Z,1478864884.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:04.706Z,1478864884.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:04.803Z,1478864884.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:05.089Z,1478864885.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:05.106Z,1478864885.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:05.504Z,1478864885.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:05.530Z,1478864885.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:05.907Z,1478864885.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:05.935Z,1478864885.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:06.289Z,1478864886.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:06.373Z,1478864886.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:06.693Z,1478864886.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:06.716Z,1478864886.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:07.113Z,1478864887.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:07.166Z,1478864887.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:07.489Z,1478864887.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:07.528Z,1478864887.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:07.889Z,1478864887.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:07.969Z,1478864887.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:08.304Z,1478864888.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:08.333Z,1478864888.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:08.689Z,1478864888.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:08.773Z,1478864888.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:09.089Z,1478864889.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:09.126Z,1478864889.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:09.503Z,1478864889.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:09.522Z,1478864889.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:09.900Z,1478864889.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:09.921Z,1478864889.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:10.289Z,1478864890.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:10.315Z,1478864890.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:10.695Z,1478864890.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:10.761Z,1478864890.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:11.098Z,1478864891.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:11.116Z,1478864891.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:11.499Z,1478864891.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:11.515Z,1478864891.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:11.902Z,1478864891.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:11.921Z,1478864891.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:12.294Z,1478864892.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:12.331Z,1478864892.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:12.689Z,1478864892.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:12.726Z,1478864892.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:13.099Z,1478864893.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:13.125Z,1478864893.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:13.489Z,1478864893.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:13.526Z,1478864893.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:13.890Z,1478864893.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:13.926Z,1478864893.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:14.290Z,1478864894.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:14.329Z,1478864894.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:14.689Z,1478864894.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:14.730Z,1478864894.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:15.090Z,1478864895.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:15.148Z,1478864895.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:15.499Z,1478864895.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:15.516Z,1478864895.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:15.894Z,1478864895.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:15.928Z,1478864895.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:16.289Z,1478864896.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:16.324Z,1478864896.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:16.689Z,1478864896.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:16.707Z,1478864896.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:17.100Z,1478864897.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:17.129Z,1478864897.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:17.489Z,1478864897.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:17.526Z,1478864897.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:17.899Z,1478864897.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:17.926Z,1478864897.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:18.295Z,1478864898.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:18.310Z,1478864898.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:18.742Z,1478864898.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:18.833Z,1478864898.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:19.120Z,1478864899.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:19.160Z,1478864899.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:19.513Z,1478864899.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:19.608Z,1478864899.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:19.889Z,1478864899.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:19.969Z,1478864899.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:20.289Z,1478864900.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:20.330Z,1478864900.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:20.689Z,1478864900.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:20.801Z,1478864900.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:21.100Z,1478864901.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:21.136Z,1478864901.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:21.489Z,1478864901.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:21.542Z,1478864901.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:21.889Z,1478864901.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:21.942Z,1478864901.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:22.289Z,1478864902.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:22.337Z,1478864902.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:22.689Z,1478864902.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:22.802Z,1478864902.802 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:22.803Z,1478864902.803 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 120
2016-11-11T11:48:22.803Z,1478864902.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:48:22.818Z,1478864902.818 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:22.818Z,1478864902.818 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 120
2016-11-11T11:48:22.818Z,1478864902.818 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:48:22.820Z,1478864902.820 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:22.820Z,1478864902.820 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 120
2016-11-11T11:48:22.820Z,1478864902.820 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:48:22.843Z,1478864902.843 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:48:22.844Z,1478864902.844 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:48:22.845Z,1478864902.845 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:48:23.097Z,1478864903.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:23.178Z,1478864903.178 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:48:23.178Z,1478864903.178 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 120
2016-11-11T11:48:23.178Z,1478864903.178 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:48:23.179Z,1478864903.179 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 120
2016-11-11T11:48:23.191Z,1478864903.191 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:48:23.191Z,1478864903.191 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 120
2016-11-11T11:48:23.489Z,1478864903.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:23.520Z,1478864903.520 [PNI_TCM](ERROR): CRC does not match. Expected:0x12963 got:0x6335
2016-11-11T11:48:23.552Z,1478864903.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:48:23.553Z,1478864903.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:48:23.553Z,1478864903.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:48:23.566Z,1478864903.566 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:48:23.566Z,1478864903.566 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:48:23.567Z,1478864903.566 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:48:23.575Z,1478864903.575 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:48:23.576Z,1478864903.576 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:48:23.576Z,1478864903.576 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:48:23.900Z,1478864903.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:23.916Z,1478864903.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:24.302Z,1478864904.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:24.337Z,1478864904.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:24.729Z,1478864904.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:24.771Z,1478864904.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:25.123Z,1478864905.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:25.160Z,1478864905.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:25.506Z,1478864905.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:25.522Z,1478864905.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:25.898Z,1478864905.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:25.930Z,1478864905.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:26.302Z,1478864906.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:26.321Z,1478864906.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:26.689Z,1478864906.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:26.720Z,1478864906.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:27.104Z,1478864907.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:27.120Z,1478864907.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:27.494Z,1478864907.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:27.534Z,1478864907.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:27.889Z,1478864907.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:27.911Z,1478864907.911 [PNI_TCM](ERROR): CRC does not match. Expected:0x7489 got:0x30745
2016-11-11T11:48:27.930Z,1478864907.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:28.024Z,1478864908.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:28.289Z,1478864908.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:28.333Z,1478864908.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:28.693Z,1478864908.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:28.732Z,1478864908.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:28.740Z,1478864908.740 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T11:48:28.741Z,1478864908.741 [Default:CheckIn:C.Wait] Stopped
2016-11-11T11:48:28.741Z,1478864908.741 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T11:48:28.741Z,1478864908.741 [Default:CheckIn:D] Running Loop=1
2016-11-11T11:48:28.820Z,1478864908.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:29.095Z,1478864909.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:29.132Z,1478864909.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:29.141Z,1478864909.141 [Default:CheckIn:D] Stopped
2016-11-11T11:48:29.141Z,1478864909.141 [Default:CheckIn:E] Running Loop=1
2016-11-11T11:48:29.489Z,1478864909.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:29.511Z,1478864909.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:29.536Z,1478864909.536 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 418.463835 min 
2016-11-11T11:48:29.536Z,1478864909.536 [Default:CheckIn:E] Stopped
2016-11-11T11:48:29.536Z,1478864909.536 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T11:48:29.537Z,1478864909.537 [Default:CheckIn] Stopped
2016-11-11T11:48:29.537Z,1478864909.537 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T11:48:29.537Z,1478864909.537 [Default:CheckIn](INFO): Running loop #41
2016-11-11T11:48:29.537Z,1478864909.537 [Default:CheckIn] Running Loop=41
2016-11-11T11:48:29.537Z,1478864909.537 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T11:48:29.537Z,1478864909.537 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T11:48:29.889Z,1478864909.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:29.929Z,1478864909.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:30.277Z,1478864910.277 [NAL9602](INFO): Powering up
2016-11-11T11:48:30.298Z,1478864910.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:30.334Z,1478864910.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:33.746Z,1478864913.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:33.833Z,1478864913.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:33.918Z,1478864913.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:33.961Z,1478864913.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:34.326Z,1478864914.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:34.341Z,1478864914.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:34.779Z,1478864914.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:34.831Z,1478864914.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:35.124Z,1478864915.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:35.146Z,1478864915.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:35.524Z,1478864915.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:35.562Z,1478864915.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:35.928Z,1478864915.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:35.989Z,1478864915.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:36.346Z,1478864916.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:36.394Z,1478864916.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:36.739Z,1478864916.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:36.795Z,1478864916.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:37.127Z,1478864917.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:37.166Z,1478864917.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:37.515Z,1478864917.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:37.530Z,1478864917.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:37.916Z,1478864917.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:37.932Z,1478864917.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:38.320Z,1478864918.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:38.336Z,1478864918.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:38.733Z,1478864918.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:38.776Z,1478864918.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:39.120Z,1478864919.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:39.135Z,1478864919.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:39.526Z,1478864919.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:39.541Z,1478864919.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:39.929Z,1478864919.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:39.963Z,1478864919.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:40.353Z,1478864920.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:40.391Z,1478864920.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:40.732Z,1478864920.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:40.747Z,1478864920.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:41.109Z,1478864921.109 [NAL9602](INFO): NAL9602 initialized
2016-11-11T11:48:41.132Z,1478864921.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:41.164Z,1478864921.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:41.525Z,1478864921.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:41.551Z,1478864921.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:41.961Z,1478864921.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:41.993Z,1478864921.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:42.000Z,1478864922.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:42.336Z,1478864922.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:42.360Z,1478864922.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:42.728Z,1478864922.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:42.766Z,1478864922.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:42.796Z,1478864922.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:43.130Z,1478864923.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:43.210Z,1478864923.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:43.518Z,1478864923.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:43.542Z,1478864923.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:43.922Z,1478864923.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:43.937Z,1478864923.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:44.321Z,1478864924.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:44.337Z,1478864924.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:44.717Z,1478864924.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:44.741Z,1478864924.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:45.169Z,1478864925.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:45.222Z,1478864925.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:45.521Z,1478864925.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:45.541Z,1478864925.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:45.921Z,1478864925.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:45.942Z,1478864925.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:46.317Z,1478864926.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:46.369Z,1478864926.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:46.737Z,1478864926.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:46.773Z,1478864926.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:47.113Z,1478864927.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:47.140Z,1478864927.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:47.517Z,1478864927.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:47.553Z,1478864927.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:47.911Z,1478864927.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:47.973Z,1478864927.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:48.312Z,1478864928.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:48.343Z,1478864928.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:48.744Z,1478864928.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:48.778Z,1478864928.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:49.123Z,1478864929.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:49.176Z,1478864929.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:49.516Z,1478864929.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:49.549Z,1478864929.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:49.922Z,1478864929.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:49.962Z,1478864929.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:50.312Z,1478864930.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:50.365Z,1478864930.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:50.728Z,1478864930.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:50.757Z,1478864930.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:51.117Z,1478864931.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:51.150Z,1478864931.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:51.512Z,1478864931.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:51.544Z,1478864931.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:51.912Z,1478864931.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:51.927Z,1478864931.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:52.311Z,1478864932.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:52.326Z,1478864932.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:52.722Z,1478864932.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:52.761Z,1478864932.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:53.154Z,1478864933.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:53.170Z,1478864933.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:53.526Z,1478864933.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:53.560Z,1478864933.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:53.913Z,1478864933.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:53.929Z,1478864933.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:54.317Z,1478864934.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:54.357Z,1478864934.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:54.714Z,1478864934.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:54.772Z,1478864934.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:55.117Z,1478864935.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:55.149Z,1478864935.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:55.513Z,1478864935.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:55.550Z,1478864935.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:55.917Z,1478864935.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:55.950Z,1478864935.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:56.320Z,1478864936.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:56.352Z,1478864936.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:56.721Z,1478864936.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:56.753Z,1478864936.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:57.177Z,1478864937.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:57.205Z,1478864937.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:57.529Z,1478864937.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:57.544Z,1478864937.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:57.925Z,1478864937.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:57.957Z,1478864937.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:58.326Z,1478864938.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:58.365Z,1478864938.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:58.739Z,1478864938.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:58.778Z,1478864938.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:59.183Z,1478864939.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:59.223Z,1478864939.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:59.515Z,1478864939.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:59.538Z,1478864939.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:48:59.923Z,1478864939.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:48:59.940Z,1478864939.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:00.324Z,1478864940.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:00.345Z,1478864940.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:00.724Z,1478864940.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:00.756Z,1478864940.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:01.122Z,1478864941.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:01.173Z,1478864941.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:01.517Z,1478864941.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:01.537Z,1478864941.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:01.916Z,1478864941.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:01.938Z,1478864941.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:02.319Z,1478864942.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:02.374Z,1478864942.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:02.720Z,1478864942.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:02.756Z,1478864942.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:03.113Z,1478864943.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:03.165Z,1478864943.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:03.512Z,1478864943.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:03.527Z,1478864943.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:03.913Z,1478864943.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:03.969Z,1478864943.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:04.313Z,1478864944.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:04.354Z,1478864944.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:04.730Z,1478864944.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:04.754Z,1478864944.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:05.121Z,1478864945.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:05.137Z,1478864945.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:05.521Z,1478864945.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:05.541Z,1478864945.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:05.924Z,1478864945.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:05.940Z,1478864945.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:06.313Z,1478864946.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:06.346Z,1478864946.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:06.724Z,1478864946.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:06.757Z,1478864946.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:07.112Z,1478864947.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:07.147Z,1478864947.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:07.513Z,1478864947.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:07.546Z,1478864947.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:07.913Z,1478864947.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:07.945Z,1478864947.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:08.312Z,1478864948.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:08.335Z,1478864948.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:08.714Z,1478864948.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:08.794Z,1478864948.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:09.117Z,1478864949.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:09.133Z,1478864949.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:09.517Z,1478864949.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:09.533Z,1478864949.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:09.921Z,1478864949.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:09.967Z,1478864949.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:10.342Z,1478864950.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:10.378Z,1478864950.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:10.729Z,1478864950.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:10.752Z,1478864950.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:11.137Z,1478864951.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:11.192Z,1478864951.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:11.517Z,1478864951.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:11.549Z,1478864951.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:11.914Z,1478864951.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:11.945Z,1478864951.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:12.317Z,1478864952.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:12.354Z,1478864952.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:12.713Z,1478864952.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:12.753Z,1478864952.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:13.102Z,1478864953.102 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-11T11:49:13.175Z,1478864953.175 [NAL9602](FAULT): received: 
+CSQ:0

OK4, 2, 0, 0, 0

OK
2016-11-11T11:49:13.175Z,1478864953.175 [NAL9602] Data Fault, FailCount= 1
2016-11-11T11:49:13.175Z,1478864953.175 [NAL9602](ERROR): Data Fault
2016-11-11T11:49:13.200Z,1478864953.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:13.256Z,1478864953.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:13.293Z,1478864953.293 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T11:49:13.509Z,1478864953.509 [NAL9602](INFO): Powering down
2016-11-11T11:49:13.526Z,1478864953.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:13.542Z,1478864953.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:13.925Z,1478864953.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:13.940Z,1478864953.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:14.349Z,1478864954.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:14.386Z,1478864954.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:14.435Z,1478864954.435 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T11:49:14.435Z,1478864954.435 [NAL9602] No Fault, FailCount= 1
2016-11-11T11:49:14.709Z,1478864954.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:14.769Z,1478864954.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:15.119Z,1478864955.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:15.150Z,1478864955.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:15.532Z,1478864955.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:15.548Z,1478864955.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:15.946Z,1478864955.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:15.989Z,1478864955.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:16.320Z,1478864956.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:16.382Z,1478864956.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:16.720Z,1478864956.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:16.757Z,1478864956.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:17.121Z,1478864957.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:17.156Z,1478864957.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:17.517Z,1478864957.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:17.569Z,1478864957.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:17.919Z,1478864957.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:17.934Z,1478864957.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:18.317Z,1478864958.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:18.371Z,1478864958.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:18.701Z,1478864958.701 [NAL9602](INFO): Powering up NAL9602
2016-11-11T11:49:18.718Z,1478864958.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:18.773Z,1478864958.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:19.119Z,1478864959.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:19.134Z,1478864959.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:19.520Z,1478864959.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:19.536Z,1478864959.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:19.916Z,1478864959.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:19.940Z,1478864959.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:20.320Z,1478864960.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:20.336Z,1478864960.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:20.730Z,1478864960.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:20.749Z,1478864960.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:21.111Z,1478864961.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:21.139Z,1478864961.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:21.511Z,1478864961.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:21.535Z,1478864961.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:21.911Z,1478864961.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:21.949Z,1478864961.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:22.311Z,1478864962.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:22.326Z,1478864962.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:22.767Z,1478864962.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:22.795Z,1478864962.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:23.116Z,1478864963.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:23.131Z,1478864963.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:23.516Z,1478864963.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:23.537Z,1478864963.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:23.918Z,1478864963.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:23.934Z,1478864963.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:24.324Z,1478864964.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:24.339Z,1478864964.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:24.721Z,1478864964.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:24.737Z,1478864964.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:25.126Z,1478864965.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:25.154Z,1478864965.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:25.513Z,1478864965.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:25.550Z,1478864965.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:25.917Z,1478864965.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:25.953Z,1478864965.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:26.311Z,1478864966.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:26.326Z,1478864966.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:26.717Z,1478864966.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:26.732Z,1478864966.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:27.157Z,1478864967.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:27.213Z,1478864967.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:27.528Z,1478864967.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:27.556Z,1478864967.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:27.913Z,1478864967.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:27.947Z,1478864967.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:28.313Z,1478864968.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:28.342Z,1478864968.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:28.717Z,1478864968.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:28.753Z,1478864968.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:29.121Z,1478864969.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:29.173Z,1478864969.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:29.528Z,1478864969.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:29.560Z,1478864969.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:29.895Z,1478864969.895 [NAL9602](INFO): NAL9602 initialized
2016-11-11T11:49:29.921Z,1478864969.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:29.941Z,1478864969.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:30.326Z,1478864970.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:30.341Z,1478864970.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:33.819Z,1478864973.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:33.882Z,1478864973.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:33.993Z,1478864973.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:34.029Z,1478864974.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:34.383Z,1478864974.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:34.399Z,1478864974.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:34.773Z,1478864974.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:34.793Z,1478864974.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:35.157Z,1478864975.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:35.205Z,1478864975.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:35.559Z,1478864975.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:35.593Z,1478864975.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:35.968Z,1478864975.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:36.022Z,1478864976.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:36.380Z,1478864976.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:36.434Z,1478864976.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:36.781Z,1478864976.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:36.810Z,1478864976.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:37.161Z,1478864977.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:37.181Z,1478864977.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:37.561Z,1478864977.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:37.581Z,1478864977.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:37.958Z,1478864977.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:37.985Z,1478864977.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:38.360Z,1478864978.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:38.393Z,1478864978.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:38.766Z,1478864978.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:38.782Z,1478864978.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:39.167Z,1478864979.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:39.183Z,1478864979.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:39.560Z,1478864979.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:39.593Z,1478864979.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:39.957Z,1478864979.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:39.996Z,1478864979.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:40.375Z,1478864980.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:40.394Z,1478864980.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:40.775Z,1478864980.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:40.799Z,1478864980.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:41.177Z,1478864981.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:41.193Z,1478864981.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:41.589Z,1478864981.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:41.605Z,1478864981.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:41.968Z,1478864981.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:42.002Z,1478864982.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:42.357Z,1478864982.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:42.373Z,1478864982.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:42.758Z,1478864982.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:42.785Z,1478864982.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:43.160Z,1478864983.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:43.193Z,1478864983.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:43.564Z,1478864983.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:43.580Z,1478864983.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:43.965Z,1478864983.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:43.989Z,1478864983.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:44.357Z,1478864984.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:44.383Z,1478864984.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:44.773Z,1478864984.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:44.793Z,1478864984.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:45.157Z,1478864985.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:45.197Z,1478864985.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:45.557Z,1478864985.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:45.590Z,1478864985.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:45.979Z,1478864985.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:45.995Z,1478864985.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:46.381Z,1478864986.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:46.396Z,1478864986.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:46.788Z,1478864986.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:46.804Z,1478864986.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:47.168Z,1478864987.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:47.202Z,1478864987.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:47.557Z,1478864987.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:47.621Z,1478864987.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:47.957Z,1478864987.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:47.977Z,1478864987.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:48.361Z,1478864988.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:48.377Z,1478864988.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:48.770Z,1478864988.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:48.825Z,1478864988.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:49.165Z,1478864989.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:49.189Z,1478864989.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:49.564Z,1478864989.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:49.580Z,1478864989.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:49.965Z,1478864989.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:50.018Z,1478864990.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:50.361Z,1478864990.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:50.383Z,1478864990.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:50.766Z,1478864990.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:50.823Z,1478864990.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:51.178Z,1478864991.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:51.228Z,1478864991.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:51.575Z,1478864991.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:51.590Z,1478864991.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:51.979Z,1478864991.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:51.995Z,1478864991.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:52.376Z,1478864992.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:52.406Z,1478864992.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:52.761Z,1478864992.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:52.787Z,1478864992.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:53.157Z,1478864993.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:53.189Z,1478864993.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:53.557Z,1478864993.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:53.590Z,1478864993.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:53.957Z,1478864993.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:53.985Z,1478864993.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:54.361Z,1478864994.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:54.401Z,1478864994.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:54.757Z,1478864994.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:54.772Z,1478864994.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:55.158Z,1478864995.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:55.181Z,1478864995.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:55.567Z,1478864995.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:55.583Z,1478864995.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:55.965Z,1478864995.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:55.980Z,1478864995.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:56.374Z,1478864996.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:56.394Z,1478864996.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:56.775Z,1478864996.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:56.790Z,1478864996.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:57.183Z,1478864997.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:57.198Z,1478864997.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:57.572Z,1478864997.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:57.603Z,1478864997.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:57.957Z,1478864997.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:57.989Z,1478864997.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:58.357Z,1478864998.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:58.394Z,1478864998.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:58.766Z,1478864998.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:58.792Z,1478864998.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:59.157Z,1478864999.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:59.189Z,1478864999.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:59.558Z,1478864999.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:59.593Z,1478864999.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:49:59.965Z,1478864999.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:49:59.000Z,1478865000.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:00.365Z,1478865000.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:00.400Z,1478865000.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:00.766Z,1478865000.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:00.781Z,1478865000.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:01.161Z,1478865001.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:01.188Z,1478865001.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:01.572Z,1478865001.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:01.587Z,1478865001.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:01.972Z,1478865001.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:01.997Z,1478865001.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:02.378Z,1478865002.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:02.429Z,1478865002.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:02.782Z,1478865002.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:02.790Z,1478865002.790 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T11:50:02.790Z,1478865002.790 [BPC1] Data Fault, FailCount= 1
2016-11-11T11:50:02.790Z,1478865002.790 [BPC1](ERROR): Data Fault
2016-11-11T11:50:02.799Z,1478865002.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:02.856Z,1478865002.856 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T11:50:03.157Z,1478865003.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:03.193Z,1478865003.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:03.565Z,1478865003.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:03.587Z,1478865003.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:03.977Z,1478865003.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:03.994Z,1478865003.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:04.030Z,1478865004.030 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:50:04.030Z,1478865004.030 [BPC1] No Fault, FailCount= 1
2016-11-11T11:50:04.357Z,1478865004.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:04.430Z,1478865004.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:04.773Z,1478865004.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:04.832Z,1478865004.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:05.161Z,1478865005.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:05.193Z,1478865005.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:05.558Z,1478865005.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:05.597Z,1478865005.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:05.961Z,1478865005.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:05.987Z,1478865005.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:06.357Z,1478865006.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:06.389Z,1478865006.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:06.779Z,1478865006.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:06.804Z,1478865006.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:07.168Z,1478865007.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:07.194Z,1478865007.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:07.580Z,1478865007.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:07.596Z,1478865007.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:07.984Z,1478865007.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:07.999Z,1478865008.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:08.357Z,1478865008.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:08.389Z,1478865008.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:08.762Z,1478865008.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:08.797Z,1478865008.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:09.158Z,1478865009.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:09.173Z,1478865009.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:09.562Z,1478865009.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:09.577Z,1478865009.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:09.980Z,1478865009.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:10.005Z,1478865010.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:10.357Z,1478865010.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:10.385Z,1478865010.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:10.764Z,1478865010.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:10.780Z,1478865010.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:11.169Z,1478865011.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:11.184Z,1478865011.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:11.565Z,1478865011.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:11.585Z,1478865011.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:11.982Z,1478865011.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:11.998Z,1478865011.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:12.378Z,1478865012.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:12.394Z,1478865012.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:12.787Z,1478865012.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:12.803Z,1478865012.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:13.172Z,1478865013.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:13.198Z,1478865013.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:13.557Z,1478865013.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:13.589Z,1478865013.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:13.957Z,1478865013.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:13.989Z,1478865013.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:14.366Z,1478865014.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:14.390Z,1478865014.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:14.762Z,1478865014.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:14.789Z,1478865014.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:15.161Z,1478865015.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:15.189Z,1478865015.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:15.565Z,1478865015.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:15.593Z,1478865015.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:15.970Z,1478865015.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:15.986Z,1478865015.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:16.359Z,1478865016.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:16.389Z,1478865016.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:16.778Z,1478865016.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:16.853Z,1478865016.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:17.189Z,1478865017.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:17.205Z,1478865017.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:17.588Z,1478865017.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:17.649Z,1478865017.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:17.973Z,1478865017.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:17.988Z,1478865017.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:18.368Z,1478865018.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:18.417Z,1478865018.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:18.769Z,1478865018.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:18.825Z,1478865018.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:19.163Z,1478865019.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:19.180Z,1478865019.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:19.564Z,1478865019.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:19.581Z,1478865019.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:19.966Z,1478865019.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:19.981Z,1478865019.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:20.364Z,1478865020.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:20.389Z,1478865020.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:20.766Z,1478865020.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:20.787Z,1478865020.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:21.157Z,1478865021.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:21.193Z,1478865021.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:21.554Z,1478865021.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:21.580Z,1478865021.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:21.973Z,1478865021.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:22.000Z,1478865022.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:22.384Z,1478865022.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:22.399Z,1478865022.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:22.772Z,1478865022.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:22.793Z,1478865022.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:23.175Z,1478865023.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:23.191Z,1478865023.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:23.584Z,1478865023.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:23.600Z,1478865023.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:23.957Z,1478865023.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:23.989Z,1478865023.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:24.357Z,1478865024.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:24.389Z,1478865024.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:24.757Z,1478865024.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:24.790Z,1478865024.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:25.157Z,1478865025.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:25.189Z,1478865025.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:25.557Z,1478865025.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:25.588Z,1478865025.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:25.958Z,1478865025.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:25.993Z,1478865025.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:26.357Z,1478865026.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:26.397Z,1478865026.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:26.766Z,1478865026.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:26.797Z,1478865026.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:27.158Z,1478865027.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:27.173Z,1478865027.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:27.576Z,1478865027.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:27.612Z,1478865027.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:27.968Z,1478865027.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:27.984Z,1478865027.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:28.372Z,1478865028.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:28.387Z,1478865028.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:28.769Z,1478865028.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:28.789Z,1478865028.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:29.160Z,1478865029.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:29.193Z,1478865029.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:29.566Z,1478865029.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:29.581Z,1478865029.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:29.958Z,1478865029.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:29.992Z,1478865029.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:30.357Z,1478865030.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:30.386Z,1478865030.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:33.913Z,1478865033.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:33.990Z,1478865033.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:34.109Z,1478865034.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:34.135Z,1478865034.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:34.495Z,1478865034.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:34.550Z,1478865034.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:34.894Z,1478865034.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:34.901Z,1478865034.901 [PNI_TCM](ERROR): CRC does not match. Expected:0x43822 got:0x1857
2016-11-11T11:50:34.981Z,1478865034.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:35.269Z,1478865035.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:35.328Z,1478865035.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:35.669Z,1478865035.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:35.717Z,1478865035.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:36.069Z,1478865036.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:36.110Z,1478865036.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:36.474Z,1478865036.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:36.506Z,1478865036.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:36.877Z,1478865036.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:36.909Z,1478865036.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:37.270Z,1478865037.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:37.308Z,1478865037.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:37.672Z,1478865037.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:37.702Z,1478865037.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:38.077Z,1478865038.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:38.097Z,1478865038.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:38.493Z,1478865038.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:38.556Z,1478865038.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:38.888Z,1478865038.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:38.921Z,1478865038.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:39.292Z,1478865039.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:39.310Z,1478865039.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:39.695Z,1478865039.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:39.710Z,1478865039.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:40.084Z,1478865040.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:40.120Z,1478865040.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:40.469Z,1478865040.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:40.564Z,1478865040.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:40.877Z,1478865040.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:40.919Z,1478865040.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:41.273Z,1478865041.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:41.292Z,1478865041.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:41.675Z,1478865041.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:41.697Z,1478865041.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:42.078Z,1478865042.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:42.093Z,1478865042.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:42.512Z,1478865042.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:42.565Z,1478865042.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:42.874Z,1478865042.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:42.894Z,1478865042.894 [PNI_TCM](ERROR): CRC does not match. Expected:0x25816 got:0x48683
2016-11-11T11:50:42.921Z,1478865042.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:43.274Z,1478865043.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:43.315Z,1478865043.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:43.669Z,1478865043.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:43.711Z,1478865043.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:44.098Z,1478865044.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:44.114Z,1478865044.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:44.498Z,1478865044.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:44.560Z,1478865044.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:44.888Z,1478865044.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:44.925Z,1478865044.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:45.284Z,1478865045.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:45.300Z,1478865045.300 [PNI_TCM](ERROR): CRC does not match. Expected:0x11962 got:0x48833
2016-11-11T11:50:45.318Z,1478865045.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:45.673Z,1478865045.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:45.711Z,1478865045.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:46.071Z,1478865046.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:46.080Z,1478865046.080 [PNI_TCM](ERROR): CRC does not match. Expected:0x22453 got:0x48728
2016-11-11T11:50:46.109Z,1478865046.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:46.475Z,1478865046.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:46.521Z,1478865046.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:46.869Z,1478865046.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:46.909Z,1478865046.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:47.270Z,1478865047.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:47.337Z,1478865047.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:47.730Z,1478865047.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:47.757Z,1478865047.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:48.069Z,1478865048.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:48.115Z,1478865048.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:48.473Z,1478865048.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:48.529Z,1478865048.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:48.872Z,1478865048.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:48.891Z,1478865048.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:49.293Z,1478865049.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:49.340Z,1478865049.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:49.684Z,1478865049.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:49.741Z,1478865049.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:50.096Z,1478865050.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:50.117Z,1478865050.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:50.495Z,1478865050.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:50.510Z,1478865050.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:50.875Z,1478865050.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:50.902Z,1478865050.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:51.283Z,1478865051.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:51.330Z,1478865051.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:51.678Z,1478865051.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:51.688Z,1478865051.688 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T11:50:51.706Z,1478865051.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:52.081Z,1478865052.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:52.094Z,1478865052.094 [PNI_TCM](ERROR): CRC does not match. Expected:0x26550 got:0x1857
2016-11-11T11:50:52.134Z,1478865052.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:52.506Z,1478865052.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:52.549Z,1478865052.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:52.869Z,1478865052.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:52.912Z,1478865052.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:53.274Z,1478865053.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:53.309Z,1478865053.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:53.679Z,1478865053.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:53.695Z,1478865053.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:54.083Z,1478865054.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:54.098Z,1478865054.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:54.549Z,1478865054.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:54.585Z,1478865054.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:54.885Z,1478865054.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:54.909Z,1478865054.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:55.294Z,1478865055.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:55.309Z,1478865055.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:55.694Z,1478865055.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:55.710Z,1478865055.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:56.073Z,1478865056.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:56.117Z,1478865056.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:56.542Z,1478865056.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:56.553Z,1478865056.553 [PNI_TCM](ERROR): CRC does not match. Expected:0x46852 got:0x16913
2016-11-11T11:50:56.592Z,1478865056.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:56.872Z,1478865056.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:56.900Z,1478865056.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:57.275Z,1478865057.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:57.290Z,1478865057.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:57.677Z,1478865057.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:57.715Z,1478865057.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:58.074Z,1478865058.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:58.083Z,1478865058.083 [PNI_TCM](ERROR): CRC does not match. Expected:0x16211 got:0x17042
2016-11-11T11:50:58.121Z,1478865058.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:58.521Z,1478865058.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:58.573Z,1478865058.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:58.878Z,1478865058.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:58.901Z,1478865058.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:59.272Z,1478865059.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:59.317Z,1478865059.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:50:59.689Z,1478865059.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:50:59.696Z,1478865059.696 [PNI_TCM](ERROR): CRC does not match. Expected:0x24292 got:0x43876
2016-11-11T11:50:59.729Z,1478865059.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:00.090Z,1478865060.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:00.105Z,1478865060.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:00.488Z,1478865060.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:00.504Z,1478865060.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:00.894Z,1478865060.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:00.918Z,1478865060.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:01.280Z,1478865061.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:01.309Z,1478865061.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:01.674Z,1478865061.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:01.745Z,1478865061.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:01.780Z,1478865061.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:02.070Z,1478865062.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:02.105Z,1478865062.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:02.469Z,1478865062.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:02.505Z,1478865062.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:02.576Z,1478865062.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:02.873Z,1478865062.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:02.887Z,1478865062.887 [PNI_TCM](ERROR): CRC does not match. Expected:0x29867 got:0x17017
2016-11-11T11:51:02.946Z,1478865062.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:03.273Z,1478865063.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:03.304Z,1478865063.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:03.368Z,1478865063.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:03.670Z,1478865063.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:03.718Z,1478865063.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:04.071Z,1478865064.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:04.121Z,1478865064.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:04.164Z,1478865064.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:04.472Z,1478865064.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:04.513Z,1478865064.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:04.888Z,1478865064.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:04.960Z,1478865064.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:04.985Z,1478865064.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:05.289Z,1478865065.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:05.309Z,1478865065.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:05.372Z,1478865065.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:05.697Z,1478865065.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:05.717Z,1478865065.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:06.093Z,1478865066.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:06.113Z,1478865066.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:06.168Z,1478865066.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:06.490Z,1478865066.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:06.549Z,1478865066.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:06.873Z,1478865066.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:06.894Z,1478865066.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:06.912Z,1478865066.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:07.279Z,1478865067.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:07.294Z,1478865067.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:07.679Z,1478865067.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:07.694Z,1478865067.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:07.712Z,1478865067.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:08.076Z,1478865068.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:08.100Z,1478865068.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:08.489Z,1478865068.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:08.509Z,1478865068.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:08.530Z,1478865068.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:08.871Z,1478865068.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:08.899Z,1478865068.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:08.916Z,1478865068.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:09.279Z,1478865069.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:09.304Z,1478865069.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:09.669Z,1478865069.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:09.705Z,1478865069.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:09.712Z,1478865069.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:10.091Z,1478865070.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:10.106Z,1478865070.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:10.500Z,1478865070.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:10.508Z,1478865070.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:10.542Z,1478865070.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:10.883Z,1478865070.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:10.916Z,1478865070.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:10.918Z,1478865070.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:11.280Z,1478865071.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:11.306Z,1478865071.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:11.677Z,1478865071.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:11.709Z,1478865071.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:11.712Z,1478865071.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:12.072Z,1478865072.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:12.087Z,1478865072.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:12.508Z,1478865072.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:12.515Z,1478865072.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:12.563Z,1478865072.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:12.877Z,1478865072.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:12.897Z,1478865072.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:12.916Z,1478865072.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:13.280Z,1478865073.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:13.295Z,1478865073.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:13.674Z,1478865073.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:13.710Z,1478865073.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:13.713Z,1478865073.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:14.075Z,1478865074.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:14.096Z,1478865074.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:14.477Z,1478865074.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:14.497Z,1478865074.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:14.508Z,1478865074.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:14.869Z,1478865074.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:14.901Z,1478865074.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:14.968Z,1478865074.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:15.288Z,1478865075.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:15.316Z,1478865075.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:15.693Z,1478865075.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:15.713Z,1478865075.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:15.764Z,1478865075.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:16.084Z,1478865076.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:16.145Z,1478865076.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:16.488Z,1478865076.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:16.537Z,1478865076.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:16.560Z,1478865076.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:16.879Z,1478865076.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:16.985Z,1478865076.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:17.272Z,1478865077.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:17.300Z,1478865077.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:17.324Z,1478865077.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:17.672Z,1478865077.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:17.724Z,1478865077.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:18.077Z,1478865078.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:18.092Z,1478865078.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:18.120Z,1478865078.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:18.473Z,1478865078.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:18.527Z,1478865078.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:18.881Z,1478865078.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:18.917Z,1478865078.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:18.994Z,1478865078.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:19.269Z,1478865079.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:19.313Z,1478865079.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:19.344Z,1478865079.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:19.669Z,1478865079.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:19.709Z,1478865079.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:20.071Z,1478865080.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:20.113Z,1478865080.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:20.140Z,1478865080.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:20.509Z,1478865080.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:20.538Z,1478865080.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:20.856Z,1478865080.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:20.884Z,1478865080.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:20.916Z,1478865080.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:21.292Z,1478865081.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:21.307Z,1478865081.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:21.652Z,1478865081.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:21.702Z,1478865081.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:21.717Z,1478865081.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:22.069Z,1478865082.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:22.105Z,1478865082.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:22.449Z,1478865082.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:22.494Z,1478865082.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:22.514Z,1478865082.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:22.860Z,1478865082.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:22.871Z,1478865082.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:22.901Z,1478865082.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:23.272Z,1478865083.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:23.305Z,1478865083.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:23.656Z,1478865083.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:23.682Z,1478865083.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:23.701Z,1478865083.701 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:23.701Z,1478865083.701 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 121
2016-11-11T11:51:23.701Z,1478865083.701 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:51:23.708Z,1478865083.708 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:23.708Z,1478865083.708 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 121
2016-11-11T11:51:23.708Z,1478865083.708 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:51:23.710Z,1478865083.710 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:23.711Z,1478865083.711 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 121
2016-11-11T11:51:23.711Z,1478865083.711 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:51:23.737Z,1478865083.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:51:23.737Z,1478865083.737 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:51:23.738Z,1478865083.738 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:51:24.069Z,1478865084.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:24.135Z,1478865084.135 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:51:24.135Z,1478865084.135 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 121
2016-11-11T11:51:24.136Z,1478865084.136 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:51:24.136Z,1478865084.136 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 121
2016-11-11T11:51:24.137Z,1478865084.137 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:51:24.137Z,1478865084.137 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 121
2016-11-11T11:51:24.452Z,1478865084.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:24.489Z,1478865084.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:24.544Z,1478865084.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:51:24.544Z,1478865084.544 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:51:24.544Z,1478865084.545 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:51:24.549Z,1478865084.549 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:51:24.550Z,1478865084.550 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:51:24.550Z,1478865084.550 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:51:24.550Z,1478865084.550 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:51:24.555Z,1478865084.555 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:51:24.556Z,1478865084.556 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:51:24.869Z,1478865084.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:24.906Z,1478865084.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:24.908Z,1478865084.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:25.269Z,1478865085.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:25.306Z,1478865085.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:25.688Z,1478865085.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:25.704Z,1478865085.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:25.721Z,1478865085.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:26.080Z,1478865086.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:26.113Z,1478865086.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:26.495Z,1478865086.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:26.500Z,1478865086.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:26.529Z,1478865086.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:26.884Z,1478865086.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:26.908Z,1478865086.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:26.922Z,1478865086.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:27.273Z,1478865087.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:27.289Z,1478865087.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:27.676Z,1478865087.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:27.692Z,1478865087.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:27.704Z,1478865087.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:28.072Z,1478865088.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:28.097Z,1478865088.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:28.472Z,1478865088.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:28.500Z,1478865088.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:28.535Z,1478865088.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:28.877Z,1478865088.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:28.912Z,1478865088.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:28.960Z,1478865088.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:29.273Z,1478865089.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:29.289Z,1478865089.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:29.673Z,1478865089.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:29.693Z,1478865089.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:29.756Z,1478865089.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:30.073Z,1478865090.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:30.093Z,1478865090.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:30.478Z,1478865090.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:30.497Z,1478865090.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:30.552Z,1478865090.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:31.304Z,1478865091.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:32.100Z,1478865092.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:32.897Z,1478865092.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:33.308Z,1478865093.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:33.919Z,1478865093.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:34.005Z,1478865094.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:34.104Z,1478865094.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:34.106Z,1478865094.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:34.125Z,1478865094.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:34.503Z,1478865094.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:34.545Z,1478865094.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:34.840Z,1478865094.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:34.890Z,1478865094.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:34.914Z,1478865094.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:35.273Z,1478865095.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:35.338Z,1478865095.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:35.636Z,1478865095.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:35.681Z,1478865095.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:35.741Z,1478865095.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:36.073Z,1478865096.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:36.106Z,1478865096.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:36.441Z,1478865096.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:36.475Z,1478865096.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:36.519Z,1478865096.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:36.873Z,1478865096.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:36.896Z,1478865096.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:36.909Z,1478865096.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:37.273Z,1478865097.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:37.289Z,1478865097.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:37.678Z,1478865097.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:37.692Z,1478865097.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:37.698Z,1478865097.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:38.076Z,1478865098.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:38.096Z,1478865098.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:38.484Z,1478865098.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:38.488Z,1478865098.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:38.509Z,1478865098.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:38.890Z,1478865098.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:38.896Z,1478865098.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:38.907Z,1478865098.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:39.291Z,1478865099.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:39.306Z,1478865099.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:39.692Z,1478865099.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:39.697Z,1478865099.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:39.712Z,1478865099.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:40.088Z,1478865100.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:40.110Z,1478865100.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:40.475Z,1478865100.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:40.488Z,1478865100.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:40.533Z,1478865100.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:40.873Z,1478865100.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:40.896Z,1478865100.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:40.913Z,1478865100.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:41.273Z,1478865101.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:41.305Z,1478865101.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:41.677Z,1478865101.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:41.692Z,1478865101.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:41.710Z,1478865101.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:42.074Z,1478865102.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:42.089Z,1478865102.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:42.478Z,1478865102.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:42.489Z,1478865102.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:42.558Z,1478865102.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:42.878Z,1478865102.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:42.900Z,1478865102.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:42.932Z,1478865102.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:43.281Z,1478865103.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:43.300Z,1478865103.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:43.676Z,1478865103.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:43.709Z,1478865103.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:43.728Z,1478865103.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:44.096Z,1478865104.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:44.111Z,1478865104.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:44.492Z,1478865104.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:44.513Z,1478865104.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:44.524Z,1478865104.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:44.915Z,1478865104.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:44.978Z,1478865104.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:45.284Z,1478865105.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:45.288Z,1478865105.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:45.313Z,1478865105.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:45.681Z,1478865105.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:45.696Z,1478865105.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:46.080Z,1478865106.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:46.084Z,1478865106.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:46.101Z,1478865106.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:46.477Z,1478865106.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:46.498Z,1478865106.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:46.884Z,1478865106.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:46.900Z,1478865106.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:46.961Z,1478865106.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:47.276Z,1478865107.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:47.308Z,1478865107.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:47.328Z,1478865107.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:47.676Z,1478865107.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:47.726Z,1478865107.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:48.073Z,1478865108.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:48.124Z,1478865108.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:48.127Z,1478865108.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:48.473Z,1478865108.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:48.513Z,1478865108.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:48.812Z,1478865108.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:48.873Z,1478865108.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:48.925Z,1478865108.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:49.287Z,1478865109.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:49.322Z,1478865109.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:49.608Z,1478865109.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:49.684Z,1478865109.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:49.729Z,1478865109.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:50.087Z,1478865110.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:50.138Z,1478865110.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:50.405Z,1478865110.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:50.496Z,1478865110.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:50.521Z,1478865110.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:50.816Z,1478865110.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:50.877Z,1478865110.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:50.901Z,1478865110.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:51.280Z,1478865111.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:51.301Z,1478865111.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:51.612Z,1478865111.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:51.682Z,1478865111.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:51.697Z,1478865111.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:52.076Z,1478865112.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:52.099Z,1478865112.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:52.412Z,1478865112.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:52.488Z,1478865112.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:52.503Z,1478865112.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:52.832Z,1478865112.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:52.874Z,1478865112.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:52.948Z,1478865112.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:53.273Z,1478865113.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:53.300Z,1478865113.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:53.630Z,1478865113.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:53.690Z,1478865113.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:53.709Z,1478865113.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:54.074Z,1478865114.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:54.100Z,1478865114.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:54.425Z,1478865114.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:54.496Z,1478865114.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:54.511Z,1478865114.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:54.844Z,1478865114.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:54.892Z,1478865114.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:54.916Z,1478865114.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:55.296Z,1478865115.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:55.321Z,1478865115.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:55.640Z,1478865115.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:55.684Z,1478865115.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:55.721Z,1478865115.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:56.073Z,1478865116.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:56.116Z,1478865116.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:56.436Z,1478865116.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:56.531Z,1478865116.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:56.583Z,1478865116.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:56.873Z,1478865116.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:56.893Z,1478865116.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:56.916Z,1478865116.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:57.273Z,1478865117.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:57.293Z,1478865117.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:57.681Z,1478865117.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:57.696Z,1478865117.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:57.716Z,1478865117.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:58.080Z,1478865118.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:58.101Z,1478865118.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:58.480Z,1478865118.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:58.501Z,1478865118.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:58.512Z,1478865118.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:58.907Z,1478865118.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:58.939Z,1478865118.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:59.268Z,1478865119.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:59.279Z,1478865119.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:59.313Z,1478865119.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:51:59.695Z,1478865119.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:51:59.710Z,1478865119.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:00.064Z,1478865120.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:00.096Z,1478865120.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:00.128Z,1478865120.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:00.488Z,1478865120.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:00.521Z,1478865120.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:00.860Z,1478865120.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:00.913Z,1478865120.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:00.953Z,1478865120.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:01.272Z,1478865121.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:01.275Z,1478865121.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:01.307Z,1478865121.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:01.674Z,1478865121.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:01.733Z,1478865121.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:02.068Z,1478865122.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:02.074Z,1478865122.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:02.137Z,1478865122.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:02.473Z,1478865122.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:02.493Z,1478865122.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:02.788Z,1478865122.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:02.880Z,1478865122.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:02.928Z,1478865122.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:03.276Z,1478865123.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:03.300Z,1478865123.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:03.584Z,1478865123.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:03.681Z,1478865123.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:03.731Z,1478865123.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:04.081Z,1478865124.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:04.096Z,1478865124.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:04.381Z,1478865124.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:04.496Z,1478865124.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:04.545Z,1478865124.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:04.792Z,1478865124.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:04.892Z,1478865124.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:04.913Z,1478865124.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:05.281Z,1478865125.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:05.296Z,1478865125.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:05.588Z,1478865125.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:05.680Z,1478865125.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:05.701Z,1478865125.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:06.077Z,1478865126.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:06.100Z,1478865126.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:06.385Z,1478865126.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:06.489Z,1478865126.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:06.504Z,1478865126.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:06.796Z,1478865126.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:06.873Z,1478865126.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:06.905Z,1478865126.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:07.281Z,1478865127.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:07.304Z,1478865127.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:07.592Z,1478865127.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:07.695Z,1478865127.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:07.710Z,1478865127.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:08.090Z,1478865128.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:08.105Z,1478865128.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:08.389Z,1478865128.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:08.485Z,1478865128.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:08.508Z,1478865128.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:08.800Z,1478865128.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:08.873Z,1478865128.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:08.905Z,1478865128.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:09.273Z,1478865129.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:09.299Z,1478865129.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:09.596Z,1478865129.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:09.674Z,1478865129.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:09.706Z,1478865129.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:10.073Z,1478865130.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:10.105Z,1478865130.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:10.392Z,1478865130.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:10.500Z,1478865130.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:10.570Z,1478865130.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:10.877Z,1478865130.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:10.897Z,1478865130.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:10.924Z,1478865130.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:11.274Z,1478865131.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:11.301Z,1478865131.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:11.683Z,1478865131.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:11.698Z,1478865131.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:11.720Z,1478865131.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:12.089Z,1478865132.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:12.109Z,1478865132.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:12.476Z,1478865132.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:12.508Z,1478865132.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:12.516Z,1478865132.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:12.903Z,1478865132.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:12.945Z,1478865132.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:13.256Z,1478865133.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:13.275Z,1478865133.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:13.312Z,1478865133.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:13.682Z,1478865133.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:13.703Z,1478865133.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:14.052Z,1478865134.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:14.073Z,1478865134.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:14.110Z,1478865134.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:14.491Z,1478865134.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:14.506Z,1478865134.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:14.857Z,1478865134.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:14.891Z,1478865134.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:14.936Z,1478865134.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:15.277Z,1478865135.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:15.303Z,1478865135.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:15.308Z,1478865135.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:15.682Z,1478865135.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:15.710Z,1478865135.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:16.073Z,1478865136.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:16.104Z,1478865136.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:16.113Z,1478865136.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:16.483Z,1478865136.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:16.561Z,1478865136.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:16.768Z,1478865136.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:16.892Z,1478865136.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:16.920Z,1478865136.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:17.276Z,1478865137.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:17.325Z,1478865137.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:17.564Z,1478865137.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:17.680Z,1478865137.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:17.695Z,1478865137.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:18.084Z,1478865138.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:18.133Z,1478865138.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:18.361Z,1478865138.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:18.485Z,1478865138.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:18.539Z,1478865138.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:18.776Z,1478865138.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:18.877Z,1478865138.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:18.900Z,1478865138.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:19.284Z,1478865139.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:19.310Z,1478865139.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:19.572Z,1478865139.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:19.677Z,1478865139.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:19.700Z,1478865139.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:20.083Z,1478865140.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:20.105Z,1478865140.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:20.369Z,1478865140.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:20.486Z,1478865140.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:20.513Z,1478865140.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:20.788Z,1478865140.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:20.892Z,1478865140.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:20.914Z,1478865140.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:21.293Z,1478865141.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:21.313Z,1478865141.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:21.586Z,1478865141.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:21.674Z,1478865141.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:21.711Z,1478865141.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:22.074Z,1478865142.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:22.109Z,1478865142.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:22.381Z,1478865142.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:22.482Z,1478865142.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:22.517Z,1478865142.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:22.796Z,1478865142.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:22.873Z,1478865142.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:22.909Z,1478865142.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:23.273Z,1478865143.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:23.290Z,1478865143.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:23.592Z,1478865143.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:23.673Z,1478865143.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:23.690Z,1478865143.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:24.077Z,1478865144.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:24.094Z,1478865144.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:24.388Z,1478865144.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:24.495Z,1478865144.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:24.535Z,1478865144.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:24.881Z,1478865144.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:24.902Z,1478865144.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:24.932Z,1478865144.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:25.287Z,1478865145.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:25.306Z,1478865145.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:25.684Z,1478865145.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:25.700Z,1478865145.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:25.728Z,1478865145.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:26.088Z,1478865146.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:26.104Z,1478865146.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:26.491Z,1478865146.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:26.506Z,1478865146.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:26.528Z,1478865146.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:26.888Z,1478865146.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:26.917Z,1478865146.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:27.244Z,1478865147.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:27.287Z,1478865147.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:27.302Z,1478865147.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:27.673Z,1478865147.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:27.705Z,1478865147.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:28.040Z,1478865148.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:28.073Z,1478865148.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:28.109Z,1478865148.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:28.473Z,1478865148.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:28.505Z,1478865148.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:28.837Z,1478865148.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:28.875Z,1478865148.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:28.907Z,1478865148.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:29.248Z,1478865149.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:29.283Z,1478865149.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:29.305Z,1478865149.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:29.680Z,1478865149.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:29.701Z,1478865149.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:30.044Z,1478865150.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:30.088Z,1478865150.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:30.104Z,1478865150.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:30.488Z,1478865150.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:30.541Z,1478865150.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:30.748Z,1478865150.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:31.548Z,1478865151.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:32.345Z,1478865152.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:32.764Z,1478865152.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:33.560Z,1478865153.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:34.357Z,1478865154.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:34.773Z,1478865154.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:35.568Z,1478865155.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:36.364Z,1478865156.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:36.772Z,1478865156.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:37.568Z,1478865157.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:37.663Z,1478865157.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:37.696Z,1478865157.695 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:52:37.696Z,1478865157.696 [BPC1] Communications Fault, FailCount= 1
2016-11-11T11:52:37.696Z,1478865157.696 [BPC1](ERROR): Communications Fault
2016-11-11T11:52:37.715Z,1478865157.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:37.822Z,1478865157.822 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:52:37.897Z,1478865157.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:37.943Z,1478865157.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:38.295Z,1478865158.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:38.327Z,1478865158.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:38.364Z,1478865158.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:38.682Z,1478865158.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:38.738Z,1478865158.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:38.811Z,1478865158.811 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:52:38.811Z,1478865158.811 [BPC1] No Fault, FailCount= 1
2016-11-11T11:52:38.848Z,1478865158.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:39.057Z,1478865159.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:39.191Z,1478865159.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:39.455Z,1478865159.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:39.527Z,1478865159.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:39.645Z,1478865159.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:39.862Z,1478865159.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:39.878Z,1478865159.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:40.260Z,1478865160.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:40.277Z,1478865160.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:40.440Z,1478865160.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:40.661Z,1478865160.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:40.678Z,1478865160.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:41.055Z,1478865161.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:41.102Z,1478865161.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:41.196Z,1478865161.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:41.458Z,1478865161.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:41.474Z,1478865161.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:41.860Z,1478865161.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:41.876Z,1478865161.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:41.992Z,1478865161.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:42.282Z,1478865162.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:42.325Z,1478865162.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:42.676Z,1478865162.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:42.698Z,1478865162.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:42.789Z,1478865162.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:43.080Z,1478865163.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:43.119Z,1478865163.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:43.208Z,1478865163.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:43.486Z,1478865163.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:43.541Z,1478865163.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:43.871Z,1478865163.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:43.887Z,1478865163.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:44.006Z,1478865164.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:44.260Z,1478865164.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:44.333Z,1478865164.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:44.663Z,1478865164.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:44.744Z,1478865164.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:44.800Z,1478865164.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:45.064Z,1478865165.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:45.116Z,1478865165.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:45.208Z,1478865165.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:45.459Z,1478865165.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:45.524Z,1478865165.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:45.859Z,1478865165.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:45.974Z,1478865165.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:46.004Z,1478865166.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:46.263Z,1478865166.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:46.323Z,1478865166.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:46.667Z,1478865166.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:46.732Z,1478865166.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:46.760Z,1478865166.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:47.055Z,1478865167.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:47.125Z,1478865167.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:47.455Z,1478865167.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:47.527Z,1478865167.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:47.556Z,1478865167.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:47.871Z,1478865167.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:47.922Z,1478865167.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:48.266Z,1478865168.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:48.353Z,1478865168.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:48.363Z,1478865168.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:48.670Z,1478865168.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:48.722Z,1478865168.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:48.760Z,1478865168.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:49.066Z,1478865169.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:49.134Z,1478865169.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:49.463Z,1478865169.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:49.514Z,1478865169.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:49.556Z,1478865169.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:49.863Z,1478865169.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:49.942Z,1478865169.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:50.261Z,1478865170.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:50.352Z,1478865170.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:50.361Z,1478865170.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:50.665Z,1478865170.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:50.730Z,1478865170.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:50.760Z,1478865170.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:51.056Z,1478865171.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:51.098Z,1478865171.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:51.454Z,1478865171.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:51.556Z,1478865171.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:51.578Z,1478865171.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:51.864Z,1478865171.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:51.897Z,1478865171.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:52.254Z,1478865172.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:52.322Z,1478865172.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:52.352Z,1478865172.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:52.664Z,1478865172.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:52.709Z,1478865172.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:52.820Z,1478865172.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:53.070Z,1478865173.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:53.133Z,1478865173.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:53.472Z,1478865173.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:53.530Z,1478865173.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:53.616Z,1478865173.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:53.876Z,1478865173.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:53.920Z,1478865173.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:54.274Z,1478865174.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:54.305Z,1478865174.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:54.413Z,1478865174.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:54.655Z,1478865174.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:54.696Z,1478865174.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:55.055Z,1478865175.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:55.105Z,1478865175.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:55.196Z,1478865175.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:55.461Z,1478865175.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:55.508Z,1478865175.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:55.854Z,1478865175.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:55.888Z,1478865175.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:55.992Z,1478865175.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:56.255Z,1478865176.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:56.303Z,1478865176.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:56.655Z,1478865176.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:56.697Z,1478865176.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:56.788Z,1478865176.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:57.059Z,1478865177.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:57.101Z,1478865177.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:57.200Z,1478865177.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:57.454Z,1478865177.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:57.498Z,1478865177.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:57.855Z,1478865177.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:57.900Z,1478865177.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:57.996Z,1478865177.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:58.305Z,1478865178.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:58.369Z,1478865178.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:58.673Z,1478865178.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:58.733Z,1478865178.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:58.744Z,1478865178.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:59.078Z,1478865179.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:59.126Z,1478865179.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:59.465Z,1478865179.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:59.503Z,1478865179.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:52:59.540Z,1478865179.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:59.861Z,1478865179.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:52:59.898Z,1478865179.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:00.253Z,1478865180.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:00.336Z,1478865180.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:00.356Z,1478865180.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:00.668Z,1478865180.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:00.708Z,1478865180.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:00.744Z,1478865180.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:01.067Z,1478865181.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:01.090Z,1478865181.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:01.457Z,1478865181.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:01.493Z,1478865181.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:01.540Z,1478865181.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:01.858Z,1478865181.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:01.883Z,1478865181.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:02.266Z,1478865182.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:02.324Z,1478865182.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:02.336Z,1478865182.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:02.653Z,1478865182.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:02.693Z,1478865182.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:02.744Z,1478865182.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:03.053Z,1478865183.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:03.086Z,1478865183.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:03.477Z,1478865183.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:03.493Z,1478865183.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:03.540Z,1478865183.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:03.880Z,1478865183.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:03.913Z,1478865183.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:04.298Z,1478865184.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:04.308Z,1478865184.308 [PNI_TCM](ERROR): CRC does not match. Expected:0x10177 got:0x43897
2016-11-11T11:53:04.336Z,1478865184.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:04.353Z,1478865184.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:04.670Z,1478865184.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:04.696Z,1478865184.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:04.744Z,1478865184.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:05.055Z,1478865185.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:05.102Z,1478865185.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:05.454Z,1478865185.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:05.521Z,1478865185.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:05.540Z,1478865185.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:05.857Z,1478865185.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:05.917Z,1478865185.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:06.263Z,1478865186.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:06.280Z,1478865186.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:06.336Z,1478865186.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:06.669Z,1478865186.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:06.717Z,1478865186.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:06.792Z,1478865186.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:07.068Z,1478865187.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:07.101Z,1478865187.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:07.457Z,1478865187.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:07.498Z,1478865187.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:07.588Z,1478865187.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:07.858Z,1478865187.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:07.909Z,1478865187.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:08.259Z,1478865188.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:08.275Z,1478865188.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:08.384Z,1478865188.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:08.668Z,1478865188.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:08.701Z,1478865188.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:09.068Z,1478865189.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:09.077Z,1478865189.077 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T11:53:09.105Z,1478865189.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:09.152Z,1478865189.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:09.473Z,1478865189.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:09.493Z,1478865189.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:09.868Z,1478865189.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:09.883Z,1478865189.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:09.948Z,1478865189.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:10.257Z,1478865190.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:10.289Z,1478865190.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:10.657Z,1478865190.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:10.677Z,1478865190.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:10.744Z,1478865190.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:11.054Z,1478865191.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:11.071Z,1478865191.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:11.460Z,1478865191.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:11.481Z,1478865191.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:11.540Z,1478865191.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:11.855Z,1478865191.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:11.895Z,1478865191.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:12.263Z,1478865192.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:12.288Z,1478865192.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:12.336Z,1478865192.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:12.659Z,1478865192.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:12.675Z,1478865192.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:13.056Z,1478865193.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:13.072Z,1478865193.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:13.132Z,1478865193.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:13.457Z,1478865193.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:13.482Z,1478865193.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:13.870Z,1478865193.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:13.885Z,1478865193.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:13.928Z,1478865193.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:14.275Z,1478865194.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:14.299Z,1478865194.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:14.668Z,1478865194.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:14.683Z,1478865194.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:14.724Z,1478865194.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:15.070Z,1478865195.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:15.087Z,1478865195.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:15.454Z,1478865195.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:15.481Z,1478865195.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:15.520Z,1478865195.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:15.856Z,1478865195.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:15.871Z,1478865195.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:16.261Z,1478865196.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:16.285Z,1478865196.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:16.316Z,1478865196.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:16.658Z,1478865196.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:16.693Z,1478865196.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:17.060Z,1478865197.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:17.067Z,1478865197.067 [PNI_TCM](ERROR): CRC does not match. Expected:0x49268 got:0x7361
2016-11-11T11:53:17.093Z,1478865197.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:17.112Z,1478865197.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:17.461Z,1478865197.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:17.481Z,1478865197.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:17.857Z,1478865197.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:17.908Z,1478865197.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:17.930Z,1478865197.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:18.262Z,1478865198.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:18.288Z,1478865198.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:18.659Z,1478865198.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:18.676Z,1478865198.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:18.704Z,1478865198.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:19.068Z,1478865199.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:19.089Z,1478865199.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:19.468Z,1478865199.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:19.489Z,1478865199.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:19.500Z,1478865199.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:19.870Z,1478865199.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:19.913Z,1478865199.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:20.276Z,1478865200.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:20.296Z,1478865200.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:20.317Z,1478865200.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:20.656Z,1478865200.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:20.671Z,1478865200.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:21.057Z,1478865201.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:21.093Z,1478865201.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:21.105Z,1478865201.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:21.459Z,1478865201.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:21.476Z,1478865201.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:21.859Z,1478865201.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:21.888Z,1478865201.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:21.898Z,1478865201.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:22.274Z,1478865202.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:22.334Z,1478865202.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:22.657Z,1478865202.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:22.677Z,1478865202.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:22.684Z,1478865202.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:23.060Z,1478865203.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:23.076Z,1478865203.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:23.454Z,1478865203.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:23.477Z,1478865203.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:23.480Z,1478865203.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:23.857Z,1478865203.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:23.877Z,1478865203.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:24.271Z,1478865204.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:24.276Z,1478865204.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:24.288Z,1478865204.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:24.669Z,1478865204.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:24.690Z,1478865204.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:25.068Z,1478865205.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:25.072Z,1478865205.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:25.089Z,1478865205.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:25.468Z,1478865205.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:25.483Z,1478865205.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:25.853Z,1478865205.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:25.868Z,1478865205.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:25.874Z,1478865205.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:26.263Z,1478865206.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:26.281Z,1478865206.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:26.659Z,1478865206.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:26.664Z,1478865206.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:26.677Z,1478865206.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:27.057Z,1478865207.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:27.077Z,1478865207.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:27.457Z,1478865207.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:27.460Z,1478865207.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:27.481Z,1478865207.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:27.855Z,1478865207.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:27.870Z,1478865207.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:28.257Z,1478865208.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:28.265Z,1478865208.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:28.282Z,1478865208.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:28.657Z,1478865208.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:28.677Z,1478865208.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:29.052Z,1478865209.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:29.059Z,1478865209.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:29.074Z,1478865209.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:29.472Z,1478865209.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:29.487Z,1478865209.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:29.848Z,1478865209.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:29.868Z,1478865209.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:29.884Z,1478865209.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:29.893Z,1478865209.893 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T11:48:29.5Z
2016-11-11T11:53:29.893Z,1478865209.893 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T11:53:29.893Z,1478865209.893 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T11:53:30.270Z,1478865210.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:30.285Z,1478865210.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:30.644Z,1478865210.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:31.440Z,1478865211.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:31.848Z,1478865211.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:32.257Z,1478865212.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:32.668Z,1478865212.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:33.076Z,1478865213.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:33.102Z,1478865213.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:33.130Z,1478865213.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:33.484Z,1478865213.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:33.892Z,1478865213.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:34.306Z,1478865214.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:34.736Z,1478865214.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:35.144Z,1478865215.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:35.552Z,1478865215.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:35.960Z,1478865215.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:36.368Z,1478865216.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:36.776Z,1478865216.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:37.184Z,1478865217.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:37.980Z,1478865217.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:38.776Z,1478865218.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:39.184Z,1478865219.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:39.409Z,1478865219.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:39.432Z,1478865219.432 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:53:39.432Z,1478865219.432 [BPC1] Communications Fault, FailCount= 1
2016-11-11T11:53:39.432Z,1478865219.432 [BPC1](ERROR): Communications Fault
2016-11-11T11:53:39.453Z,1478865219.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:39.490Z,1478865219.490 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:53:39.980Z,1478865219.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:40.166Z,1478865220.166 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0164.lzma
2016-11-11T11:53:40.218Z,1478865220.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:40.385Z,1478865220.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:40.479Z,1478865220.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:40.517Z,1478865220.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:40.664Z,1478865220.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:40.841Z,1478865220.841 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0164.lzma.bak
2016-11-11T11:53:40.841Z,1478865220.841 [DataOverHttps](INFO): SBD MOMSN=4555378
2016-11-11T11:53:40.886Z,1478865220.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:40.925Z,1478865220.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:40.945Z,1478865220.945 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:53:40.945Z,1478865220.945 [BPC1] No Fault, FailCount= 1
2016-11-11T11:53:41.460Z,1478865221.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:42.137Z,1478865222.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:42.248Z,1478865222.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:42.256Z,1478865222.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:42.352Z,1478865222.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:42.384Z,1478865222.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:42.664Z,1478865222.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:43.460Z,1478865223.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:44.256Z,1478865224.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:44.664Z,1478865224.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:45.460Z,1478865225.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:45.657Z,1478865225.657 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T11:53:45.674Z,1478865225.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:45.733Z,1478865225.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:45.835Z,1478865225.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:45.851Z,1478865225.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:46.243Z,1478865226.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:46.256Z,1478865226.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:46.294Z,1478865226.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:46.599Z,1478865226.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:46.617Z,1478865226.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:46.664Z,1478865226.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:46.993Z,1478865226.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:47.026Z,1478865227.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:47.396Z,1478865227.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:47.412Z,1478865227.411 [PNI_TCM](ERROR): CRC does not match. Expected:0x7533 got:0x13276
2016-11-11T11:53:47.430Z,1478865227.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:47.460Z,1478865227.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:48.256Z,1478865228.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:48.716Z,1478865228.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:49.512Z,1478865229.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:50.308Z,1478865230.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:50.991Z,1478865230.991 [NAL9602](INFO): Powering down
2016-11-11T11:53:51.042Z,1478865231.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:51.063Z,1478865231.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:51.068Z,1478865231.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:51.094Z,1478865231.094 [DataOverHttps](INFO): Sending 237 bytes from file Logs/20161111T044527/Express0165.lzma
2016-11-11T11:53:51.161Z,1478865231.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:51.197Z,1478865231.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:51.517Z,1478865231.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:51.538Z,1478865231.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:51.864Z,1478865231.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:51.893Z,1478865231.893 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0165.lzma.bak
2016-11-11T11:53:51.893Z,1478865231.893 [DataOverHttps](INFO): SBD MOMSN=4555380
2016-11-11T11:53:51.938Z,1478865231.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:51.954Z,1478865231.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:52.664Z,1478865232.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:53.076Z,1478865233.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:53.399Z,1478865233.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:53.434Z,1478865233.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:53.443Z,1478865233.443 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T11:53:53.443Z,1478865233.443 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T11:53:53.443Z,1478865233.443 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T11:53:53.534Z,1478865233.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:53.572Z,1478865233.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:53.872Z,1478865233.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:54.592Z,1478865234.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:55.388Z,1478865235.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:56.185Z,1478865236.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:56.596Z,1478865236.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:56.935Z,1478865236.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:57.007Z,1478865237.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:57.106Z,1478865237.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:57.122Z,1478865237.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:57.392Z,1478865237.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:57.497Z,1478865237.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:57.557Z,1478865237.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:57.896Z,1478865237.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:57.912Z,1478865237.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:58.189Z,1478865238.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:58.301Z,1478865238.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:58.321Z,1478865238.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:58.602Z,1478865238.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:58.692Z,1478865238.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:58.743Z,1478865238.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:59.095Z,1478865239.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:59.116Z,1478865239.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:59.396Z,1478865239.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:59.496Z,1478865239.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:59.552Z,1478865239.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:53:59.901Z,1478865239.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:53:59.956Z,1478865239.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:00.193Z,1478865240.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:00.304Z,1478865240.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:00.320Z,1478865240.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:00.608Z,1478865240.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:00.700Z,1478865240.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:00.717Z,1478865240.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:01.101Z,1478865241.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:01.118Z,1478865241.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:01.404Z,1478865241.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:01.489Z,1478865241.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:01.524Z,1478865241.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:01.889Z,1478865241.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:01.922Z,1478865241.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:02.202Z,1478865242.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:02.300Z,1478865242.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:02.349Z,1478865242.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:02.689Z,1478865242.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:02.721Z,1478865242.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:02.732Z,1478865242.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:03.089Z,1478865243.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:03.114Z,1478865243.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:03.489Z,1478865243.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:03.523Z,1478865243.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:03.528Z,1478865243.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:03.893Z,1478865243.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:03.918Z,1478865243.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:04.289Z,1478865244.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:04.322Z,1478865244.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:04.324Z,1478865244.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:04.690Z,1478865244.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:04.736Z,1478865244.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:05.048Z,1478865245.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:05.094Z,1478865245.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:05.117Z,1478865245.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:05.495Z,1478865245.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:05.510Z,1478865245.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:05.844Z,1478865245.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:05.901Z,1478865245.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:05.916Z,1478865245.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:06.301Z,1478865246.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:06.316Z,1478865246.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:06.643Z,1478865246.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:06.707Z,1478865246.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:06.726Z,1478865246.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:07.056Z,1478865247.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:07.089Z,1478865247.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:07.133Z,1478865247.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:07.493Z,1478865247.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:07.513Z,1478865247.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:07.852Z,1478865247.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:07.897Z,1478865247.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:07.917Z,1478865247.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:08.293Z,1478865248.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:08.313Z,1478865248.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:08.564Z,1478865248.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:08.693Z,1478865248.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:08.713Z,1478865248.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:09.089Z,1478865249.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:09.105Z,1478865249.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:09.360Z,1478865249.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:09.489Z,1478865249.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:09.506Z,1478865249.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:09.889Z,1478865249.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:09.909Z,1478865249.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:10.157Z,1478865250.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:10.293Z,1478865250.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:10.333Z,1478865250.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:10.689Z,1478865250.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:10.709Z,1478865250.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:10.952Z,1478865250.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:11.093Z,1478865251.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:11.108Z,1478865251.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:11.502Z,1478865251.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:11.533Z,1478865251.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:11.748Z,1478865251.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:11.893Z,1478865251.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:11.938Z,1478865251.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:12.293Z,1478865252.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:12.308Z,1478865252.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:12.544Z,1478865252.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:12.693Z,1478865252.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:12.709Z,1478865252.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:13.097Z,1478865253.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:13.138Z,1478865253.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:13.340Z,1478865253.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:13.490Z,1478865253.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:13.505Z,1478865253.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:13.893Z,1478865253.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:13.938Z,1478865253.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:14.136Z,1478865254.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:14.305Z,1478865254.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:14.370Z,1478865254.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:14.693Z,1478865254.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:14.713Z,1478865254.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:14.933Z,1478865254.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:15.093Z,1478865255.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:15.113Z,1478865255.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:15.489Z,1478865255.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:15.509Z,1478865255.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:15.728Z,1478865255.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:15.893Z,1478865255.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:15.908Z,1478865255.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:16.294Z,1478865256.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:16.310Z,1478865256.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:16.524Z,1478865256.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:16.693Z,1478865256.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:16.713Z,1478865256.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:17.089Z,1478865257.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:17.109Z,1478865257.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:17.320Z,1478865257.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:17.486Z,1478865257.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:17.501Z,1478865257.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:17.889Z,1478865257.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:17.904Z,1478865257.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:18.116Z,1478865258.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:18.293Z,1478865258.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:18.313Z,1478865258.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:18.694Z,1478865258.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:18.710Z,1478865258.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:18.912Z,1478865258.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:19.093Z,1478865259.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:19.108Z,1478865259.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:19.493Z,1478865259.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:19.552Z,1478865259.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:19.708Z,1478865259.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:19.897Z,1478865259.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:19.917Z,1478865259.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:20.293Z,1478865260.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:20.308Z,1478865260.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:20.505Z,1478865260.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:20.689Z,1478865260.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:20.709Z,1478865260.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:21.089Z,1478865261.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:21.109Z,1478865261.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:21.300Z,1478865261.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:21.493Z,1478865261.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:21.513Z,1478865261.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:21.897Z,1478865261.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:21.917Z,1478865261.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:22.096Z,1478865262.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:22.308Z,1478865262.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:22.324Z,1478865262.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:22.693Z,1478865262.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:22.713Z,1478865262.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:22.892Z,1478865262.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:23.092Z,1478865263.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:23.109Z,1478865263.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:23.493Z,1478865263.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:23.509Z,1478865263.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:23.688Z,1478865263.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:23.893Z,1478865263.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:23.913Z,1478865263.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:24.297Z,1478865264.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:24.317Z,1478865264.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:24.484Z,1478865264.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:24.697Z,1478865264.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:24.717Z,1478865264.717 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:24.717Z,1478865264.717 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 122
2016-11-11T11:54:24.717Z,1478865264.717 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:54:24.724Z,1478865264.724 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:24.724Z,1478865264.724 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 122
2016-11-11T11:54:24.724Z,1478865264.724 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:54:24.726Z,1478865264.726 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:24.727Z,1478865264.727 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 122
2016-11-11T11:54:24.727Z,1478865264.727 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:54:24.742Z,1478865264.741 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:54:24.742Z,1478865264.742 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:54:24.742Z,1478865264.742 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:54:25.089Z,1478865265.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:25.145Z,1478865265.145 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:54:25.145Z,1478865265.145 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 122
2016-11-11T11:54:25.146Z,1478865265.146 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:54:25.146Z,1478865265.146 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 122
2016-11-11T11:54:25.147Z,1478865265.147 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:54:25.147Z,1478865265.147 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 122
2016-11-11T11:54:25.280Z,1478865265.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:25.493Z,1478865265.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:25.512Z,1478865265.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:54:25.512Z,1478865265.512 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:54:25.512Z,1478865265.513 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:54:25.517Z,1478865265.517 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:54:25.518Z,1478865265.518 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:54:25.518Z,1478865265.518 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:54:25.518Z,1478865265.518 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:54:25.519Z,1478865265.519 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:54:25.519Z,1478865265.519 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:54:25.889Z,1478865265.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:25.904Z,1478865265.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:26.076Z,1478865266.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:26.293Z,1478865266.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:26.313Z,1478865266.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:26.689Z,1478865266.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:26.729Z,1478865266.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:26.872Z,1478865266.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:27.097Z,1478865267.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:27.112Z,1478865267.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:27.543Z,1478865267.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:27.593Z,1478865267.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:27.668Z,1478865267.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:27.897Z,1478865267.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:27.917Z,1478865267.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:28.076Z,1478865268.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:28.293Z,1478865268.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:28.338Z,1478865268.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:28.484Z,1478865268.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:28.690Z,1478865268.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:28.731Z,1478865268.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:28.892Z,1478865268.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:29.093Z,1478865269.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:29.113Z,1478865269.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:29.300Z,1478865269.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:29.506Z,1478865269.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:29.526Z,1478865269.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:29.708Z,1478865269.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:29.893Z,1478865269.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:29.921Z,1478865269.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:30.116Z,1478865270.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:30.291Z,1478865270.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:30.329Z,1478865270.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:30.524Z,1478865270.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:30.689Z,1478865270.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:30.713Z,1478865270.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:30.932Z,1478865270.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:31.089Z,1478865271.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:31.117Z,1478865271.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:31.340Z,1478865271.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:31.493Z,1478865271.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:31.521Z,1478865271.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:31.748Z,1478865271.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:31.889Z,1478865271.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:31.913Z,1478865271.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:32.156Z,1478865272.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:32.289Z,1478865272.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:32.317Z,1478865272.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:32.690Z,1478865272.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:32.717Z,1478865272.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:32.952Z,1478865272.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:33.094Z,1478865273.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:33.121Z,1478865273.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:33.360Z,1478865273.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:33.489Z,1478865273.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:33.513Z,1478865273.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:33.889Z,1478865273.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:33.918Z,1478865273.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:34.156Z,1478865274.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:34.289Z,1478865274.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:34.338Z,1478865274.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:34.696Z,1478865274.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:34.711Z,1478865274.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:34.952Z,1478865274.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:35.104Z,1478865275.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:35.120Z,1478865275.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:35.360Z,1478865275.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:35.489Z,1478865275.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:35.521Z,1478865275.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:35.900Z,1478865275.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:35.916Z,1478865275.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:36.156Z,1478865276.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:36.288Z,1478865276.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:36.315Z,1478865276.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:36.564Z,1478865276.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:36.694Z,1478865276.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:36.725Z,1478865276.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:37.090Z,1478865277.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:37.121Z,1478865277.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:37.360Z,1478865277.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:37.490Z,1478865277.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:37.513Z,1478865277.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:37.898Z,1478865277.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:37.930Z,1478865277.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:38.156Z,1478865278.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:38.302Z,1478865278.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:38.329Z,1478865278.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:38.693Z,1478865278.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:38.729Z,1478865278.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:38.952Z,1478865278.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:39.089Z,1478865279.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:39.129Z,1478865279.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:39.360Z,1478865279.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:39.489Z,1478865279.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:39.534Z,1478865279.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:39.889Z,1478865279.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:39.926Z,1478865279.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:40.156Z,1478865280.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:40.297Z,1478865280.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:40.317Z,1478865280.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:40.564Z,1478865280.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:40.696Z,1478865280.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:40.762Z,1478865280.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:41.089Z,1478865281.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:41.125Z,1478865281.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:41.360Z,1478865281.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:41.489Z,1478865281.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:41.542Z,1478865281.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:41.889Z,1478865281.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:41.916Z,1478865281.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:42.156Z,1478865282.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:42.289Z,1478865282.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:42.341Z,1478865282.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:42.564Z,1478865282.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:42.689Z,1478865282.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:42.741Z,1478865282.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:43.089Z,1478865283.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:43.132Z,1478865283.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:43.360Z,1478865283.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:43.500Z,1478865283.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:43.531Z,1478865283.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:43.893Z,1478865283.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:43.909Z,1478865283.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:44.156Z,1478865284.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:44.297Z,1478865284.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:44.333Z,1478865284.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:44.632Z,1478865284.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:44.698Z,1478865284.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:44.713Z,1478865284.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:45.096Z,1478865285.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:45.111Z,1478865285.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:45.428Z,1478865285.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:45.496Z,1478865285.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:45.517Z,1478865285.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:45.896Z,1478865285.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:45.917Z,1478865285.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:46.224Z,1478865286.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:46.304Z,1478865286.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:46.320Z,1478865286.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:46.699Z,1478865286.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:46.721Z,1478865286.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:46.968Z,1478865286.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:47.100Z,1478865287.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:47.121Z,1478865287.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:47.489Z,1478865287.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:47.514Z,1478865287.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:47.764Z,1478865287.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:47.896Z,1478865287.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:47.919Z,1478865287.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:48.289Z,1478865288.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:48.322Z,1478865288.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:48.561Z,1478865288.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:48.689Z,1478865288.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:48.717Z,1478865288.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:48.972Z,1478865288.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:49.093Z,1478865289.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:49.129Z,1478865289.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:49.489Z,1478865289.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:49.521Z,1478865289.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:49.768Z,1478865289.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:49.889Z,1478865289.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:49.917Z,1478865289.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:50.289Z,1478865290.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:50.325Z,1478865290.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:50.500Z,1478865290.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:50.693Z,1478865290.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:50.708Z,1478865290.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:51.093Z,1478865291.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:51.108Z,1478865291.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:51.296Z,1478865291.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:51.496Z,1478865291.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:51.511Z,1478865291.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:51.895Z,1478865291.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:51.917Z,1478865291.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:52.093Z,1478865292.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:52.301Z,1478865292.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:52.317Z,1478865292.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:52.504Z,1478865292.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:52.700Z,1478865292.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:52.717Z,1478865292.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:53.097Z,1478865293.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:53.117Z,1478865293.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:53.300Z,1478865293.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:53.497Z,1478865293.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:53.538Z,1478865293.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:53.890Z,1478865293.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:53.924Z,1478865293.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:54.100Z,1478865294.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:54.512Z,1478865294.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:55.308Z,1478865295.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:56.105Z,1478865296.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:56.516Z,1478865296.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:57.312Z,1478865297.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:57.340Z,1478865297.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:57.386Z,1478865297.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:57.497Z,1478865297.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:57.533Z,1478865297.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:57.894Z,1478865297.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:57.934Z,1478865297.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:58.108Z,1478865298.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:58.305Z,1478865298.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:58.331Z,1478865298.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:58.620Z,1478865298.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:58.693Z,1478865298.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:58.746Z,1478865298.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:59.089Z,1478865299.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:59.143Z,1478865299.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:59.416Z,1478865299.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:59.493Z,1478865299.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:59.529Z,1478865299.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:54:59.892Z,1478865299.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:54:59.908Z,1478865299.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:00.212Z,1478865300.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:00.297Z,1478865300.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:00.312Z,1478865300.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:00.701Z,1478865300.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:00.721Z,1478865300.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:00.948Z,1478865300.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:01.096Z,1478865301.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:01.112Z,1478865301.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:01.496Z,1478865301.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:01.517Z,1478865301.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:01.744Z,1478865301.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:01.892Z,1478865301.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:01.928Z,1478865301.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:02.289Z,1478865302.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:02.321Z,1478865302.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:02.541Z,1478865302.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:02.700Z,1478865302.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:02.723Z,1478865302.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:02.956Z,1478865302.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:03.093Z,1478865303.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:03.126Z,1478865303.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:03.491Z,1478865303.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:03.530Z,1478865303.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:03.752Z,1478865303.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:03.889Z,1478865303.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:03.922Z,1478865303.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:04.304Z,1478865304.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:04.320Z,1478865304.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:04.480Z,1478865304.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:04.704Z,1478865304.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:04.720Z,1478865304.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:05.089Z,1478865305.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:05.120Z,1478865305.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:05.489Z,1478865305.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:05.517Z,1478865305.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:05.889Z,1478865305.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:05.905Z,1478865305.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:06.289Z,1478865306.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:06.309Z,1478865306.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:06.697Z,1478865306.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:06.712Z,1478865306.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:07.096Z,1478865307.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:07.112Z,1478865307.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:07.496Z,1478865307.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:07.517Z,1478865307.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:07.892Z,1478865307.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:07.925Z,1478865307.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:08.303Z,1478865308.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:08.319Z,1478865308.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:08.700Z,1478865308.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:08.721Z,1478865308.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:09.101Z,1478865309.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:09.125Z,1478865309.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:09.489Z,1478865309.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:09.515Z,1478865309.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:09.893Z,1478865309.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:09.918Z,1478865309.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:10.306Z,1478865310.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:10.345Z,1478865310.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:10.689Z,1478865310.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:10.725Z,1478865310.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:11.089Z,1478865311.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:11.151Z,1478865311.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:11.300Z,1478865311.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:11.493Z,1478865311.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:11.529Z,1478865311.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:11.889Z,1478865311.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:11.938Z,1478865311.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:12.096Z,1478865312.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:12.297Z,1478865312.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:12.329Z,1478865312.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:12.576Z,1478865312.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:12.697Z,1478865312.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:12.749Z,1478865312.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:13.089Z,1478865313.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:13.141Z,1478865313.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:13.372Z,1478865313.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:13.489Z,1478865313.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:13.530Z,1478865313.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:13.893Z,1478865313.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:13.929Z,1478865313.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:14.168Z,1478865314.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:14.289Z,1478865314.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:14.333Z,1478865314.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:14.694Z,1478865314.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:14.710Z,1478865314.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:14.932Z,1478865314.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:15.093Z,1478865315.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:15.113Z,1478865315.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:15.497Z,1478865315.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:15.513Z,1478865315.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:15.728Z,1478865315.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:15.897Z,1478865315.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:15.912Z,1478865315.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:16.296Z,1478865316.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:16.312Z,1478865316.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:16.525Z,1478865316.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:16.697Z,1478865316.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:16.712Z,1478865316.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:16.936Z,1478865316.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:17.101Z,1478865317.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:17.117Z,1478865317.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:17.497Z,1478865317.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:17.516Z,1478865317.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:17.732Z,1478865317.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:17.897Z,1478865317.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:17.921Z,1478865317.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:18.289Z,1478865318.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:18.321Z,1478865318.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:18.456Z,1478865318.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:18.689Z,1478865318.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:18.715Z,1478865318.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:19.089Z,1478865319.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:19.123Z,1478865319.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:19.489Z,1478865319.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:19.524Z,1478865319.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:19.889Z,1478865319.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:19.914Z,1478865319.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:20.303Z,1478865320.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:20.323Z,1478865320.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:20.689Z,1478865320.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:20.721Z,1478865320.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:21.089Z,1478865321.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:21.123Z,1478865321.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:21.489Z,1478865321.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:21.521Z,1478865321.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:21.889Z,1478865321.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:21.921Z,1478865321.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:22.289Z,1478865322.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:22.322Z,1478865322.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:22.689Z,1478865322.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:22.715Z,1478865322.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:23.100Z,1478865323.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:23.123Z,1478865323.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:23.489Z,1478865323.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:23.522Z,1478865323.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:23.889Z,1478865323.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:23.922Z,1478865323.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:24.289Z,1478865324.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:24.349Z,1478865324.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:24.689Z,1478865324.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:24.709Z,1478865324.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:25.093Z,1478865325.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:25.108Z,1478865325.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:25.264Z,1478865325.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:25.492Z,1478865325.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:25.561Z,1478865325.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:25.889Z,1478865325.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:25.928Z,1478865325.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:26.060Z,1478865326.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:26.297Z,1478865326.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:26.322Z,1478865326.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:26.556Z,1478865326.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:26.689Z,1478865326.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:26.741Z,1478865326.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:27.093Z,1478865327.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:27.125Z,1478865327.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:27.352Z,1478865327.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:27.489Z,1478865327.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:27.541Z,1478865327.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:27.889Z,1478865327.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:27.945Z,1478865327.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:28.148Z,1478865328.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:28.289Z,1478865328.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:28.329Z,1478865328.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:28.689Z,1478865328.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:28.709Z,1478865328.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:28.908Z,1478865328.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:29.093Z,1478865329.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:29.108Z,1478865329.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:29.495Z,1478865329.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:29.510Z,1478865329.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:29.704Z,1478865329.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:29.895Z,1478865329.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:29.910Z,1478865329.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:30.296Z,1478865330.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:30.317Z,1478865330.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:30.696Z,1478865330.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:30.711Z,1478865330.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:31.091Z,1478865331.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:31.123Z,1478865331.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:31.497Z,1478865331.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:31.517Z,1478865331.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:31.896Z,1478865331.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:31.911Z,1478865331.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:32.297Z,1478865332.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:32.312Z,1478865332.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:32.697Z,1478865332.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:32.717Z,1478865332.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:33.096Z,1478865333.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:33.117Z,1478865333.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:33.495Z,1478865333.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:33.531Z,1478865333.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:33.889Z,1478865333.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:33.923Z,1478865333.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:34.289Z,1478865334.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:34.322Z,1478865334.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:34.689Z,1478865334.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:34.714Z,1478865334.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:35.089Z,1478865335.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:35.122Z,1478865335.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:35.489Z,1478865335.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:35.515Z,1478865335.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:35.889Z,1478865335.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:35.922Z,1478865335.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:36.304Z,1478865336.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:36.325Z,1478865336.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:36.689Z,1478865336.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:36.725Z,1478865336.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:37.093Z,1478865337.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:37.125Z,1478865337.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:37.489Z,1478865337.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:37.504Z,1478865337.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:37.892Z,1478865337.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:37.934Z,1478865337.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:38.300Z,1478865338.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:38.323Z,1478865338.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:38.689Z,1478865338.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:38.752Z,1478865338.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:39.089Z,1478865339.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:39.121Z,1478865339.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:39.240Z,1478865339.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:39.489Z,1478865339.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:39.517Z,1478865339.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:39.889Z,1478865339.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:39.925Z,1478865339.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:40.036Z,1478865340.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:40.289Z,1478865340.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:40.353Z,1478865340.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:40.536Z,1478865340.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:40.688Z,1478865340.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:40.709Z,1478865340.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:41.089Z,1478865341.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:41.109Z,1478865341.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:41.492Z,1478865341.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:41.541Z,1478865341.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:41.897Z,1478865341.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:41.917Z,1478865341.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:42.297Z,1478865342.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:42.347Z,1478865342.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:42.694Z,1478865342.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:42.739Z,1478865342.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:43.097Z,1478865343.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:43.112Z,1478865343.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:43.495Z,1478865343.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:43.532Z,1478865343.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:43.896Z,1478865343.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:43.917Z,1478865343.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:44.292Z,1478865344.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:44.314Z,1478865344.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:44.697Z,1478865344.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:44.717Z,1478865344.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:45.104Z,1478865345.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:45.125Z,1478865345.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:45.489Z,1478865345.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:45.515Z,1478865345.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:45.889Z,1478865345.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:45.924Z,1478865345.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:46.296Z,1478865346.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:46.318Z,1478865346.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:46.692Z,1478865346.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:46.714Z,1478865346.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:47.096Z,1478865347.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:47.117Z,1478865347.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:47.496Z,1478865347.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:47.511Z,1478865347.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:47.896Z,1478865347.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:47.919Z,1478865347.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:48.297Z,1478865348.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:48.329Z,1478865348.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:48.697Z,1478865348.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:48.730Z,1478865348.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:49.093Z,1478865349.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:49.118Z,1478865349.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:49.489Z,1478865349.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:49.525Z,1478865349.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:49.889Z,1478865349.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:49.925Z,1478865349.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:50.297Z,1478865350.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:50.333Z,1478865350.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:50.693Z,1478865350.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:50.736Z,1478865350.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:51.089Z,1478865351.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:51.104Z,1478865351.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:51.489Z,1478865351.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:51.509Z,1478865351.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:51.893Z,1478865351.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:51.908Z,1478865351.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:52.289Z,1478865352.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:52.326Z,1478865352.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:52.689Z,1478865352.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:52.721Z,1478865352.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:53.097Z,1478865353.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:53.116Z,1478865353.116 [BPC1](ERROR): Failed to parse message.
2016-11-11T11:55:53.116Z,1478865353.116 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T11:55:53.116Z,1478865353.116 [BPC1] Data Fault, FailCount= 1
2016-11-11T11:55:53.116Z,1478865353.116 [BPC1](ERROR): Data Fault
2016-11-11T11:55:53.124Z,1478865353.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:53.144Z,1478865353.144 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T11:55:53.490Z,1478865353.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:53.525Z,1478865353.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:53.891Z,1478865353.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:53.906Z,1478865353.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:55.300Z,1478865355.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:56.096Z,1478865356.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:57.258Z,1478865357.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:57.282Z,1478865357.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:57.302Z,1478865357.302 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:55:57.302Z,1478865357.302 [BPC1] No Fault, FailCount= 1
2016-11-11T11:55:57.303Z,1478865357.303 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T11:55:57.393Z,1478865357.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:57.526Z,1478865357.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:57.741Z,1478865357.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:57.828Z,1478865357.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:58.133Z,1478865358.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:58.167Z,1478865358.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:58.533Z,1478865358.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:58.561Z,1478865358.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:58.933Z,1478865358.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:58.969Z,1478865358.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:59.333Z,1478865359.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:59.369Z,1478865359.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:55:59.733Z,1478865359.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:55:59.761Z,1478865359.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:00.141Z,1478865360.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:00.173Z,1478865360.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:00.541Z,1478865360.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:00.556Z,1478865360.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:00.939Z,1478865360.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:00.955Z,1478865360.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:01.347Z,1478865361.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:01.365Z,1478865361.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:01.740Z,1478865361.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:01.755Z,1478865361.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:02.148Z,1478865362.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:02.164Z,1478865362.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:02.540Z,1478865362.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:02.563Z,1478865362.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:02.933Z,1478865362.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:02.966Z,1478865362.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:03.333Z,1478865363.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:03.365Z,1478865363.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:03.741Z,1478865363.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:03.767Z,1478865363.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:04.133Z,1478865364.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:04.165Z,1478865364.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:04.533Z,1478865364.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:04.565Z,1478865364.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:04.937Z,1478865364.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:04.974Z,1478865364.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:05.333Z,1478865365.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:05.373Z,1478865365.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:05.733Z,1478865365.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:05.773Z,1478865365.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:06.145Z,1478865366.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:06.177Z,1478865366.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:06.537Z,1478865366.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:06.577Z,1478865366.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:06.939Z,1478865366.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:06.955Z,1478865366.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:07.341Z,1478865367.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:07.356Z,1478865367.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:07.736Z,1478865367.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:07.761Z,1478865367.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:08.142Z,1478865368.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:08.178Z,1478865368.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:08.544Z,1478865368.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:08.560Z,1478865368.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:08.952Z,1478865368.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:08.991Z,1478865368.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:09.333Z,1478865369.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:09.366Z,1478865369.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:09.733Z,1478865369.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:09.793Z,1478865369.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:10.137Z,1478865370.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:10.169Z,1478865370.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:10.533Z,1478865370.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:10.556Z,1478865370.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:10.937Z,1478865370.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:10.973Z,1478865370.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:11.333Z,1478865371.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:11.376Z,1478865371.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:11.737Z,1478865371.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:11.773Z,1478865371.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:12.137Z,1478865372.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:12.173Z,1478865372.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:12.533Z,1478865372.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:12.548Z,1478865372.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:12.933Z,1478865372.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:12.942Z,1478865372.942 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:56:12.942Z,1478865372.942 [BPC1] Communications Fault, FailCount= 2
2016-11-11T11:56:12.942Z,1478865372.942 [BPC1](ERROR): Communications Fault
2016-11-11T11:56:12.951Z,1478865372.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:12.987Z,1478865372.987 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:56:13.345Z,1478865373.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:13.381Z,1478865373.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:13.741Z,1478865373.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:13.756Z,1478865373.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:14.141Z,1478865374.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:14.167Z,1478865374.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:14.187Z,1478865374.187 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:56:14.187Z,1478865374.187 [BPC1] No Fault, FailCount= 2
2016-11-11T11:56:14.541Z,1478865374.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:14.633Z,1478865374.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:14.933Z,1478865374.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:14.969Z,1478865374.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:15.333Z,1478865375.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:15.361Z,1478865375.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:15.737Z,1478865375.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:15.757Z,1478865375.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:16.145Z,1478865376.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:16.187Z,1478865376.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:16.538Z,1478865376.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:16.553Z,1478865376.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:16.942Z,1478865376.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:16.958Z,1478865376.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:17.337Z,1478865377.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:17.364Z,1478865377.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:17.734Z,1478865377.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:17.769Z,1478865377.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:18.142Z,1478865378.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:18.168Z,1478865378.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:18.533Z,1478865378.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:18.586Z,1478865378.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:18.939Z,1478865378.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:18.956Z,1478865378.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:19.340Z,1478865379.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:19.361Z,1478865379.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:19.740Z,1478865379.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:19.758Z,1478865379.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:20.133Z,1478865380.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:20.160Z,1478865380.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:20.533Z,1478865380.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:20.568Z,1478865380.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:20.940Z,1478865380.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:20.989Z,1478865380.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:21.333Z,1478865381.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:21.356Z,1478865381.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:21.733Z,1478865381.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:21.753Z,1478865381.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:22.144Z,1478865382.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:22.180Z,1478865382.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:22.533Z,1478865382.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:22.549Z,1478865382.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:22.936Z,1478865382.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:22.963Z,1478865382.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:23.337Z,1478865383.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:23.352Z,1478865383.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:23.739Z,1478865383.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:23.755Z,1478865383.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:24.144Z,1478865384.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:24.159Z,1478865384.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:24.539Z,1478865384.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:24.554Z,1478865384.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:24.940Z,1478865384.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:24.956Z,1478865384.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:25.333Z,1478865385.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:25.366Z,1478865385.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:25.733Z,1478865385.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:25.768Z,1478865385.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:26.133Z,1478865386.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:26.166Z,1478865386.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:26.533Z,1478865386.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:26.573Z,1478865386.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:26.933Z,1478865386.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:26.953Z,1478865386.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:27.334Z,1478865387.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:27.350Z,1478865387.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:27.740Z,1478865387.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:27.756Z,1478865387.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:28.139Z,1478865388.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:28.161Z,1478865388.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:28.536Z,1478865388.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:28.560Z,1478865388.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:28.940Z,1478865388.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:28.961Z,1478865388.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:29.340Z,1478865389.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:29.361Z,1478865389.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:29.740Z,1478865389.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:29.766Z,1478865389.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:30.144Z,1478865390.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:30.166Z,1478865390.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:30.533Z,1478865390.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:30.637Z,1478865390.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:30.933Z,1478865390.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:30.985Z,1478865390.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:31.333Z,1478865391.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:31.376Z,1478865391.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:31.733Z,1478865391.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:31.776Z,1478865391.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:32.141Z,1478865392.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:32.193Z,1478865392.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:32.533Z,1478865392.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:32.553Z,1478865392.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:32.933Z,1478865392.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:32.993Z,1478865392.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:33.338Z,1478865393.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:33.354Z,1478865393.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:33.740Z,1478865393.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:33.784Z,1478865393.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:34.145Z,1478865394.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:34.160Z,1478865394.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:34.540Z,1478865394.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:34.555Z,1478865394.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:34.940Z,1478865394.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:34.955Z,1478865394.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:35.336Z,1478865395.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:35.373Z,1478865395.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:35.733Z,1478865395.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:35.758Z,1478865395.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:36.141Z,1478865396.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:36.167Z,1478865396.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:36.533Z,1478865396.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:36.565Z,1478865396.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:36.938Z,1478865396.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:36.989Z,1478865396.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:37.333Z,1478865397.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:37.368Z,1478865397.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:37.733Z,1478865397.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:37.769Z,1478865397.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:38.133Z,1478865398.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:38.169Z,1478865398.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:38.533Z,1478865398.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:38.564Z,1478865398.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:38.933Z,1478865398.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:38.968Z,1478865398.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:39.333Z,1478865399.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:39.360Z,1478865399.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:39.737Z,1478865399.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:39.773Z,1478865399.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:40.137Z,1478865400.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:40.172Z,1478865400.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:40.537Z,1478865400.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:40.560Z,1478865400.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:40.933Z,1478865400.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:40.953Z,1478865400.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:41.337Z,1478865401.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:41.357Z,1478865401.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:41.736Z,1478865401.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:41.760Z,1478865401.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:42.139Z,1478865402.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:42.165Z,1478865402.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:42.532Z,1478865402.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:42.567Z,1478865402.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:42.933Z,1478865402.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:42.968Z,1478865402.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:43.333Z,1478865403.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:43.367Z,1478865403.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:43.744Z,1478865403.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:43.765Z,1478865403.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:44.149Z,1478865404.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:44.164Z,1478865404.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:44.537Z,1478865404.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:44.562Z,1478865404.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:44.933Z,1478865404.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:44.969Z,1478865404.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:45.333Z,1478865405.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:45.366Z,1478865405.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:45.732Z,1478865405.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:45.794Z,1478865405.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:46.141Z,1478865406.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:46.193Z,1478865406.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:46.533Z,1478865406.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:46.549Z,1478865406.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:46.940Z,1478865406.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:46.961Z,1478865406.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:47.333Z,1478865407.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:47.394Z,1478865407.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:47.733Z,1478865407.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:47.764Z,1478865407.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:48.141Z,1478865408.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:48.219Z,1478865408.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:48.532Z,1478865408.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:48.581Z,1478865408.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:48.934Z,1478865408.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:48.961Z,1478865408.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:49.333Z,1478865409.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:49.376Z,1478865409.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:49.733Z,1478865409.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:49.789Z,1478865409.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:50.145Z,1478865410.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:50.160Z,1478865410.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:50.535Z,1478865410.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:50.574Z,1478865410.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:50.944Z,1478865410.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:50.960Z,1478865410.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:51.333Z,1478865411.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:51.365Z,1478865411.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:51.733Z,1478865411.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:51.767Z,1478865411.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:52.133Z,1478865412.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:52.169Z,1478865412.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:52.533Z,1478865412.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:52.569Z,1478865412.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:52.933Z,1478865412.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:52.968Z,1478865412.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:53.333Z,1478865413.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:53.369Z,1478865413.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:53.737Z,1478865413.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:53.769Z,1478865413.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:54.140Z,1478865414.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:54.154Z,1478865414.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:57.509Z,1478865417.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:57.537Z,1478865417.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:57.639Z,1478865417.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:57.681Z,1478865417.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:58.002Z,1478865418.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:58.034Z,1478865418.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:58.393Z,1478865418.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:58.408Z,1478865418.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:58.791Z,1478865418.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:58.807Z,1478865418.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:59.195Z,1478865419.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:59.214Z,1478865419.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:59.592Z,1478865419.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:56:59.608Z,1478865419.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:56:59.992Z,1478865419.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:00.008Z,1478865420.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:00.392Z,1478865420.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:00.412Z,1478865420.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:00.796Z,1478865420.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:00.869Z,1478865420.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:01.185Z,1478865421.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:01.221Z,1478865421.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:01.585Z,1478865421.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:01.617Z,1478865421.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:01.993Z,1478865421.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:02.057Z,1478865422.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:02.385Z,1478865422.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:02.417Z,1478865422.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:02.785Z,1478865422.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:02.837Z,1478865422.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:03.185Z,1478865423.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:03.218Z,1478865423.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:03.585Z,1478865423.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:03.633Z,1478865423.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:04.021Z,1478865424.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:04.074Z,1478865424.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:04.385Z,1478865424.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:04.421Z,1478865424.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:04.788Z,1478865424.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:04.804Z,1478865424.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:05.192Z,1478865425.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:05.208Z,1478865425.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:05.592Z,1478865425.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:05.608Z,1478865425.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:05.992Z,1478865425.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:06.008Z,1478865426.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:06.398Z,1478865426.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:06.465Z,1478865426.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:06.785Z,1478865426.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:06.811Z,1478865426.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:07.185Z,1478865427.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:07.218Z,1478865427.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:07.585Z,1478865427.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:07.621Z,1478865427.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:08.000Z,1478865428.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:08.021Z,1478865428.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:08.398Z,1478865428.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:08.426Z,1478865428.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:08.785Z,1478865428.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:08.819Z,1478865428.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:09.185Z,1478865429.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:09.217Z,1478865429.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:09.585Z,1478865429.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:09.617Z,1478865429.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:09.985Z,1478865429.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:10.012Z,1478865430.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:10.389Z,1478865430.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:10.426Z,1478865430.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:10.785Z,1478865430.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:10.805Z,1478865430.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:11.188Z,1478865431.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:11.205Z,1478865431.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:11.590Z,1478865431.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:11.606Z,1478865431.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:11.993Z,1478865431.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:12.013Z,1478865432.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:12.392Z,1478865432.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:12.407Z,1478865432.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:12.795Z,1478865432.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:12.823Z,1478865432.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:13.185Z,1478865433.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:13.220Z,1478865433.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:13.595Z,1478865433.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:13.621Z,1478865433.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:14.001Z,1478865434.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:14.016Z,1478865434.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:14.385Z,1478865434.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:14.417Z,1478865434.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:14.785Z,1478865434.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:14.819Z,1478865434.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:15.192Z,1478865435.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:15.261Z,1478865435.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:15.585Z,1478865435.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:15.645Z,1478865435.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:15.985Z,1478865435.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:16.018Z,1478865436.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:16.393Z,1478865436.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:16.451Z,1478865436.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:16.785Z,1478865436.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:16.817Z,1478865436.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:17.185Z,1478865437.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:17.233Z,1478865437.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:17.585Z,1478865437.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:17.633Z,1478865437.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:18.010Z,1478865438.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:18.042Z,1478865438.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:18.385Z,1478865438.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:18.421Z,1478865438.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:18.785Z,1478865438.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:18.821Z,1478865438.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:19.185Z,1478865439.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:19.216Z,1478865439.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:19.585Z,1478865439.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:19.629Z,1478865439.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:19.985Z,1478865439.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:20.029Z,1478865440.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:20.398Z,1478865440.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:20.426Z,1478865440.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:20.800Z,1478865440.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:20.820Z,1478865440.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:21.185Z,1478865441.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:21.209Z,1478865441.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:21.593Z,1478865441.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:21.613Z,1478865441.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:21.993Z,1478865441.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:22.013Z,1478865442.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:22.390Z,1478865442.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:22.438Z,1478865442.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:22.785Z,1478865442.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:22.812Z,1478865442.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:23.185Z,1478865443.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:23.220Z,1478865443.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:23.585Z,1478865443.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:23.612Z,1478865443.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:23.985Z,1478865443.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:24.016Z,1478865444.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:24.389Z,1478865444.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:24.421Z,1478865444.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:24.785Z,1478865444.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:24.825Z,1478865444.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:25.185Z,1478865445.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:25.200Z,1478865445.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:25.588Z,1478865445.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:25.615Z,1478865445.615 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:25.615Z,1478865445.615 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 123
2016-11-11T11:57:25.615Z,1478865445.615 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T11:57:25.630Z,1478865445.630 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:25.630Z,1478865445.630 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 123
2016-11-11T11:57:25.630Z,1478865445.630 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T11:57:25.632Z,1478865445.632 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:25.632Z,1478865445.632 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 123
2016-11-11T11:57:25.632Z,1478865445.632 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T11:57:25.669Z,1478865445.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T11:57:25.669Z,1478865445.669 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T11:57:25.669Z,1478865445.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T11:57:25.992Z,1478865445.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:26.025Z,1478865446.025 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T11:57:26.025Z,1478865446.025 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 123
2016-11-11T11:57:26.026Z,1478865446.026 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T11:57:26.026Z,1478865446.026 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 123
2016-11-11T11:57:26.027Z,1478865446.027 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T11:57:26.027Z,1478865446.027 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 123
2016-11-11T11:57:26.392Z,1478865446.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:26.406Z,1478865446.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T11:57:26.407Z,1478865446.407 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:57:26.407Z,1478865446.407 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:57:26.412Z,1478865446.412 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T11:57:26.412Z,1478865446.412 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:57:26.413Z,1478865446.413 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:57:26.413Z,1478865446.413 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T11:57:26.414Z,1478865446.414 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T11:57:26.414Z,1478865446.414 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T11:57:26.785Z,1478865446.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:26.817Z,1478865446.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:27.185Z,1478865447.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:27.217Z,1478865447.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:27.585Z,1478865447.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:27.617Z,1478865447.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:28.001Z,1478865448.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:28.021Z,1478865448.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:28.385Z,1478865448.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:28.410Z,1478865448.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:28.785Z,1478865448.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:28.817Z,1478865448.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:29.185Z,1478865449.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:29.219Z,1478865449.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:29.585Z,1478865449.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:29.637Z,1478865449.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:29.985Z,1478865449.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:30.021Z,1478865450.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:30.385Z,1478865450.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:30.420Z,1478865450.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:30.785Z,1478865450.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:30.822Z,1478865450.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:31.185Z,1478865451.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:31.212Z,1478865451.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:31.585Z,1478865451.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:31.625Z,1478865451.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:32.003Z,1478865452.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:32.035Z,1478865452.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:32.388Z,1478865452.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:32.403Z,1478865452.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:32.789Z,1478865452.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:32.797Z,1478865452.797 [BPC1](ERROR): Failed to receive battery data
2016-11-11T11:57:32.797Z,1478865452.797 [BPC1] Communications Fault, FailCount= 1
2016-11-11T11:57:32.797Z,1478865452.797 [BPC1](ERROR): Communications Fault
2016-11-11T11:57:32.806Z,1478865452.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:32.851Z,1478865452.851 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T11:57:33.196Z,1478865453.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:33.211Z,1478865453.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:33.594Z,1478865453.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:33.610Z,1478865453.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:33.994Z,1478865453.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:34.009Z,1478865454.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:34.081Z,1478865454.081 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:57:34.081Z,1478865454.081 [BPC1] No Fault, FailCount= 1
2016-11-11T11:57:34.386Z,1478865454.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:34.509Z,1478865454.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:34.787Z,1478865454.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:34.857Z,1478865454.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:35.198Z,1478865455.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:35.269Z,1478865455.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:35.587Z,1478865455.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:35.632Z,1478865455.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:35.987Z,1478865455.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:36.027Z,1478865456.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:36.408Z,1478865456.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:36.451Z,1478865456.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:36.787Z,1478865456.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:36.825Z,1478865456.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:37.187Z,1478865457.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:37.222Z,1478865457.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:37.587Z,1478865457.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:37.602Z,1478865457.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:37.987Z,1478865457.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:38.032Z,1478865458.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:38.400Z,1478865458.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:38.446Z,1478865458.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:38.792Z,1478865458.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:38.822Z,1478865458.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:39.187Z,1478865459.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:39.230Z,1478865459.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:39.595Z,1478865459.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:39.623Z,1478865459.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:39.986Z,1478865459.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:40.026Z,1478865460.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:40.386Z,1478865460.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:40.437Z,1478865460.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:40.793Z,1478865460.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:40.818Z,1478865460.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:41.198Z,1478865461.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:41.222Z,1478865461.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:41.585Z,1478865461.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:41.618Z,1478865461.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:42.015Z,1478865462.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:42.038Z,1478865462.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:42.393Z,1478865462.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:42.419Z,1478865462.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:42.785Z,1478865462.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:42.837Z,1478865462.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:43.190Z,1478865463.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:43.222Z,1478865463.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:43.590Z,1478865463.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:43.605Z,1478865463.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:44.001Z,1478865464.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:44.051Z,1478865464.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:44.403Z,1478865464.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:44.440Z,1478865464.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:44.790Z,1478865464.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:44.840Z,1478865464.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:45.190Z,1478865465.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:45.209Z,1478865465.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:45.593Z,1478865465.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:45.665Z,1478865465.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:46.025Z,1478865466.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:46.056Z,1478865466.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:46.389Z,1478865466.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:46.421Z,1478865466.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:46.789Z,1478865466.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:46.845Z,1478865466.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:47.188Z,1478865467.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:47.228Z,1478865467.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:47.594Z,1478865467.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:47.645Z,1478865467.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:47.995Z,1478865467.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:48.050Z,1478865468.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:48.394Z,1478865468.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:48.421Z,1478865468.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:48.786Z,1478865468.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:48.844Z,1478865468.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:49.196Z,1478865469.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:49.228Z,1478865469.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:49.587Z,1478865469.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:49.621Z,1478865469.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:49.987Z,1478865469.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:50.029Z,1478865470.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:50.386Z,1478865470.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:50.434Z,1478865470.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:50.787Z,1478865470.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:50.831Z,1478865470.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:51.190Z,1478865471.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:51.217Z,1478865471.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:51.595Z,1478865471.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:51.630Z,1478865471.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:51.990Z,1478865471.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:52.037Z,1478865472.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:52.387Z,1478865472.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:52.421Z,1478865472.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:52.787Z,1478865472.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:52.821Z,1478865472.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:53.187Z,1478865473.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:53.225Z,1478865473.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:53.591Z,1478865473.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:53.635Z,1478865473.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:53.991Z,1478865473.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:54.031Z,1478865474.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:57:54.395Z,1478865474.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:57:54.425Z,1478865474.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:01.181Z,1478865481.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:01.285Z,1478865481.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:01.399Z,1478865481.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:01.452Z,1478865481.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:01.784Z,1478865481.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:01.849Z,1478865481.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:02.189Z,1478865482.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:02.285Z,1478865482.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:02.590Z,1478865482.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:02.664Z,1478865482.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:02.975Z,1478865482.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:03.026Z,1478865483.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:03.377Z,1478865483.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:03.419Z,1478865483.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:03.779Z,1478865483.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:03.801Z,1478865483.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:04.176Z,1478865484.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:04.209Z,1478865484.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:04.573Z,1478865484.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:04.601Z,1478865484.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:04.975Z,1478865484.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:04.998Z,1478865484.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:05.372Z,1478865485.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:05.403Z,1478865485.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:05.805Z,1478865485.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:05.845Z,1478865485.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:06.172Z,1478865486.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:06.198Z,1478865486.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:06.574Z,1478865486.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:06.582Z,1478865486.582 [PNI_TCM](ERROR): CRC does not match. Expected:0x2316 got:0x14105
2016-11-11T11:58:06.602Z,1478865486.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:06.979Z,1478865486.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:06.994Z,1478865486.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:07.384Z,1478865487.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:07.434Z,1478865487.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:07.826Z,1478865487.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:07.844Z,1478865487.843 [PNI_TCM](ERROR): CRC does not match. Expected:0x35326 got:0x2567
2016-11-11T11:58:07.863Z,1478865487.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:08.171Z,1478865488.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:08.199Z,1478865488.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:08.580Z,1478865488.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:08.612Z,1478865488.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:08.969Z,1478865488.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:09.005Z,1478865489.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:09.369Z,1478865489.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:09.388Z,1478865489.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:09.799Z,1478865489.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:09.837Z,1478865489.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:10.172Z,1478865490.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:10.188Z,1478865490.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:10.573Z,1478865490.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:10.605Z,1478865490.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:10.967Z,1478865490.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:10.986Z,1478865490.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.381900 seconds old.
2016-11-11T11:58:10.988Z,1478865490.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:10.988Z,1478865490.989 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.382500 seconds old.
2016-11-11T11:58:10.991Z,1478865490.991 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.382700 seconds old.
2016-11-11T11:58:10.997Z,1478865490.997 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.387300 seconds old.
2016-11-11T11:58:10.999Z,1478865490.999 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.387800 seconds old.
2016-11-11T11:58:11.375Z,1478865491.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:11.389Z,1478865491.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.785000 seconds old.
2016-11-11T11:58:11.390Z,1478865491.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:11.391Z,1478865491.391 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.785600 seconds old.
2016-11-11T11:58:11.394Z,1478865491.394 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.785800 seconds old.
2016-11-11T11:58:11.396Z,1478865491.396 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.786300 seconds old.
2016-11-11T11:58:11.398Z,1478865491.398 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.786700 seconds old.
2016-11-11T11:58:11.801Z,1478865491.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:11.834Z,1478865491.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.230300 seconds old.
2016-11-11T11:58:11.840Z,1478865491.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:11.841Z,1478865491.841 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.235200 seconds old.
2016-11-11T11:58:11.845Z,1478865491.845 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.237000 seconds old.
2016-11-11T11:58:11.855Z,1478865491.855 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.237800 seconds old.
2016-11-11T11:58:11.857Z,1478865491.857 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.245800 seconds old.
2016-11-11T11:58:12.169Z,1478865492.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:12.200Z,1478865492.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.595500 seconds old.
2016-11-11T11:58:12.201Z,1478865492.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:12.202Z,1478865492.202 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.595900 seconds old.
2016-11-11T11:58:12.205Z,1478865492.204 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.596300 seconds old.
2016-11-11T11:58:12.207Z,1478865492.207 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.596800 seconds old.
2016-11-11T11:58:12.208Z,1478865492.208 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.597400 seconds old.
2016-11-11T11:58:12.576Z,1478865492.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:12.591Z,1478865492.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:12.975Z,1478865492.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:12.990Z,1478865492.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:13.373Z,1478865493.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:13.389Z,1478865493.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:13.770Z,1478865493.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:13.805Z,1478865493.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:14.171Z,1478865494.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:14.178Z,1478865494.178 [PNI_TCM](ERROR): CRC does not match. Expected:0x35965 got:0x15129
2016-11-11T11:58:14.225Z,1478865494.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:14.576Z,1478865494.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:14.591Z,1478865494.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:14.973Z,1478865494.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:14.993Z,1478865494.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:15.383Z,1478865495.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:15.418Z,1478865495.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:15.775Z,1478865495.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:15.791Z,1478865495.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:16.175Z,1478865496.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:16.230Z,1478865496.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:16.573Z,1478865496.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:16.593Z,1478865496.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:16.975Z,1478865496.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:17.066Z,1478865497.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:17.372Z,1478865497.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:17.417Z,1478865497.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:17.775Z,1478865497.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:17.790Z,1478865497.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:18.169Z,1478865498.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:18.185Z,1478865498.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:18.576Z,1478865498.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:18.592Z,1478865498.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:18.977Z,1478865498.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:18.992Z,1478865498.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:19.374Z,1478865499.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:19.390Z,1478865499.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:19.774Z,1478865499.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:19.795Z,1478865499.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:20.175Z,1478865500.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:20.191Z,1478865500.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:20.571Z,1478865500.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:20.588Z,1478865500.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:20.973Z,1478865500.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:20.989Z,1478865500.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:21.380Z,1478865501.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:21.423Z,1478865501.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:21.774Z,1478865501.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:21.794Z,1478865501.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:22.175Z,1478865502.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:22.191Z,1478865502.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:22.569Z,1478865502.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:22.585Z,1478865502.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:22.973Z,1478865502.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:22.989Z,1478865502.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:23.375Z,1478865503.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:23.392Z,1478865503.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:23.778Z,1478865503.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:23.795Z,1478865503.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:24.173Z,1478865504.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:24.190Z,1478865504.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:24.573Z,1478865504.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:24.589Z,1478865504.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:24.974Z,1478865504.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:24.994Z,1478865504.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:25.370Z,1478865505.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:25.386Z,1478865505.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:25.780Z,1478865505.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:25.800Z,1478865505.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:26.173Z,1478865506.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:26.189Z,1478865506.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:26.576Z,1478865506.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:26.592Z,1478865506.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:26.973Z,1478865506.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:26.989Z,1478865506.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:27.374Z,1478865507.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:27.389Z,1478865507.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:27.769Z,1478865507.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:27.789Z,1478865507.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:28.176Z,1478865508.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:28.217Z,1478865508.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:28.569Z,1478865508.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:28.584Z,1478865508.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:28.970Z,1478865508.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:28.986Z,1478865508.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:29.369Z,1478865509.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:29.402Z,1478865509.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:29.770Z,1478865509.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:29.786Z,1478865509.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:30.186Z,1478865510.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:30.246Z,1478865510.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:30.573Z,1478865510.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:30.588Z,1478865510.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:30.973Z,1478865510.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:31.014Z,1478865511.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:31.373Z,1478865511.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:31.421Z,1478865511.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:31.773Z,1478865511.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:31.789Z,1478865511.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:32.169Z,1478865512.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:32.197Z,1478865512.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:32.573Z,1478865512.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:32.588Z,1478865512.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:32.971Z,1478865512.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:32.986Z,1478865512.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:33.373Z,1478865513.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:33.388Z,1478865513.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:33.792Z,1478865513.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:33.869Z,1478865513.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:34.170Z,1478865514.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:34.205Z,1478865514.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:34.570Z,1478865514.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:34.601Z,1478865514.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:34.970Z,1478865514.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:34.998Z,1478865514.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:35.368Z,1478865515.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:35.396Z,1478865515.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:35.774Z,1478865515.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:35.813Z,1478865515.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:36.169Z,1478865516.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:36.197Z,1478865516.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:36.569Z,1478865516.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:36.597Z,1478865516.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:36.969Z,1478865516.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:36.994Z,1478865516.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:37.370Z,1478865517.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:37.401Z,1478865517.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:37.776Z,1478865517.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:37.808Z,1478865517.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:38.169Z,1478865518.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:38.189Z,1478865518.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:38.570Z,1478865518.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:38.597Z,1478865518.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:38.969Z,1478865518.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:38.993Z,1478865518.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:39.369Z,1478865519.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:39.396Z,1478865519.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:39.772Z,1478865519.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:39.809Z,1478865519.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:40.206Z,1478865520.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:40.221Z,1478865520.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:40.574Z,1478865520.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:40.594Z,1478865520.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:40.977Z,1478865520.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:40.992Z,1478865520.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:41.374Z,1478865521.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:41.382Z,1478865521.382 [BPC1](ERROR): Failed to parse message.
2016-11-11T11:58:41.382Z,1478865521.382 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T11:58:41.383Z,1478865521.383 [BPC1] Data Fault, FailCount= 1
2016-11-11T11:58:41.383Z,1478865521.383 [BPC1](ERROR): Data Fault
2016-11-11T11:58:41.431Z,1478865521.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:41.483Z,1478865521.483 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T11:58:41.769Z,1478865521.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:41.853Z,1478865521.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:42.169Z,1478865522.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:42.201Z,1478865522.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:42.569Z,1478865522.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:42.601Z,1478865522.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:42.645Z,1478865522.645 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T11:58:42.645Z,1478865522.645 [BPC1] No Fault, FailCount= 1
2016-11-11T11:58:42.973Z,1478865522.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:43.057Z,1478865523.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:43.369Z,1478865523.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:43.417Z,1478865523.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:43.774Z,1478865523.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:43.805Z,1478865523.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:44.178Z,1478865524.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:44.224Z,1478865524.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:44.576Z,1478865524.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:44.591Z,1478865524.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:44.981Z,1478865524.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:45.001Z,1478865525.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:45.377Z,1478865525.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:45.397Z,1478865525.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:45.776Z,1478865525.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:45.797Z,1478865525.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:46.217Z,1478865526.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:46.250Z,1478865526.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:46.569Z,1478865526.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:46.609Z,1478865526.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:46.969Z,1478865526.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:46.986Z,1478865526.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:47.368Z,1478865527.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:47.385Z,1478865527.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:47.778Z,1478865527.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:47.805Z,1478865527.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:48.172Z,1478865528.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:48.201Z,1478865528.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:48.572Z,1478865528.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:48.595Z,1478865528.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:48.978Z,1478865528.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:49.001Z,1478865529.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:49.376Z,1478865529.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:49.392Z,1478865529.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:49.791Z,1478865529.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:49.840Z,1478865529.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:50.169Z,1478865530.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:50.204Z,1478865530.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:50.573Z,1478865530.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:50.599Z,1478865530.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:50.974Z,1478865530.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:51.013Z,1478865531.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:51.369Z,1478865531.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:51.405Z,1478865531.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:51.775Z,1478865531.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:51.808Z,1478865531.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:52.169Z,1478865532.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:52.205Z,1478865532.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:52.569Z,1478865532.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:52.605Z,1478865532.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:52.970Z,1478865532.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:53.009Z,1478865533.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:53.369Z,1478865533.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:53.385Z,1478865533.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:53.778Z,1478865533.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:53.833Z,1478865533.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:53.850Z,1478865533.850 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T11:58:53.851Z,1478865533.851 [Default:CheckIn:C.Wait] Stopped
2016-11-11T11:58:53.851Z,1478865533.851 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T11:58:53.851Z,1478865533.851 [Default:CheckIn:D] Running Loop=1
2016-11-11T11:58:54.183Z,1478865534.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:54.198Z,1478865534.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:54.208Z,1478865534.208 [Default:CheckIn:D] Stopped
2016-11-11T11:58:54.208Z,1478865534.208 [Default:CheckIn:E] Running Loop=1
2016-11-11T11:58:54.577Z,1478865534.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:54.605Z,1478865534.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:54.623Z,1478865534.623 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 428.881608 min 
2016-11-11T11:58:54.627Z,1478865534.627 [Default:CheckIn:E] Stopped
2016-11-11T11:58:54.627Z,1478865534.628 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T11:58:54.628Z,1478865534.628 [Default:CheckIn] Stopped
2016-11-11T11:58:54.628Z,1478865534.628 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T11:58:54.628Z,1478865534.628 [Default:CheckIn](INFO): Running loop #42
2016-11-11T11:58:54.628Z,1478865534.628 [Default:CheckIn] Running Loop=42
2016-11-11T11:58:54.628Z,1478865534.628 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T11:58:54.628Z,1478865534.628 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T11:58:58.259Z,1478865538.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:58.325Z,1478865538.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:58.404Z,1478865538.404 [NAL9602](INFO): Powering up
2016-11-11T11:58:58.421Z,1478865538.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:58.455Z,1478865538.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:58.812Z,1478865538.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:58.828Z,1478865538.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:59.208Z,1478865539.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:59.224Z,1478865539.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:58:59.611Z,1478865539.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:58:59.657Z,1478865539.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:00.008Z,1478865540.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:00.029Z,1478865540.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:00.408Z,1478865540.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:00.463Z,1478865540.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:00.801Z,1478865540.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:00.855Z,1478865540.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:01.201Z,1478865541.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:01.237Z,1478865541.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:01.601Z,1478865541.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:01.621Z,1478865541.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:02.012Z,1478865542.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:02.035Z,1478865542.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:02.401Z,1478865542.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:02.437Z,1478865542.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:02.801Z,1478865542.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:02.836Z,1478865542.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:03.209Z,1478865543.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:03.245Z,1478865543.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:03.601Z,1478865543.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:03.629Z,1478865543.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:04.001Z,1478865544.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:04.036Z,1478865544.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:04.405Z,1478865544.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:04.437Z,1478865544.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:04.801Z,1478865544.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:04.844Z,1478865544.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:05.201Z,1478865545.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:05.244Z,1478865545.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:05.605Z,1478865545.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:05.637Z,1478865545.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:06.012Z,1478865546.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:06.029Z,1478865546.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:06.401Z,1478865546.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:06.435Z,1478865546.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:06.804Z,1478865546.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:06.837Z,1478865546.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:07.201Z,1478865547.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:07.233Z,1478865547.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:07.601Z,1478865547.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:07.638Z,1478865547.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:08.003Z,1478865548.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:08.036Z,1478865548.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:08.401Z,1478865548.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:08.435Z,1478865548.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:08.812Z,1478865548.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:08.829Z,1478865548.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:09.227Z,1478865549.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:09.243Z,1478865549.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:09.589Z,1478865549.589 [NAL9602](INFO): NAL9602 initialized
2016-11-11T11:59:09.606Z,1478865549.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:09.636Z,1478865549.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:10.009Z,1478865550.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:10.043Z,1478865550.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:10.389Z,1478865550.389 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T11:59:10.389Z,1478865550.389 [NAL9602] Data Fault, FailCount= 2
2016-11-11T11:59:10.389Z,1478865550.389 [NAL9602](ERROR): Data Fault
2016-11-11T11:59:10.407Z,1478865550.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:10.453Z,1478865550.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:10.501Z,1478865550.500 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T11:59:10.785Z,1478865550.784 [NAL9602](INFO): Powering down
2016-11-11T11:59:10.802Z,1478865550.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:10.817Z,1478865550.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:11.208Z,1478865551.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:11.232Z,1478865551.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:11.605Z,1478865551.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:11.653Z,1478865551.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:11.699Z,1478865551.699 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T11:59:11.700Z,1478865551.700 [NAL9602] No Fault, FailCount= 2
2016-11-11T11:59:12.013Z,1478865552.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:12.028Z,1478865552.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:12.400Z,1478865552.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:12.431Z,1478865552.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:12.805Z,1478865552.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:12.841Z,1478865552.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:13.201Z,1478865553.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:13.268Z,1478865553.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:13.606Z,1478865553.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:13.621Z,1478865553.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:14.009Z,1478865554.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:14.024Z,1478865554.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:14.408Z,1478865554.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:14.455Z,1478865554.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:14.812Z,1478865554.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:14.827Z,1478865554.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:15.213Z,1478865555.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:15.271Z,1478865555.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:15.608Z,1478865555.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:15.681Z,1478865555.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:15.985Z,1478865555.985 [NAL9602](INFO): Powering up NAL9602
2016-11-11T11:59:16.002Z,1478865556.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:16.029Z,1478865556.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:16.401Z,1478865556.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:16.437Z,1478865556.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:16.801Z,1478865556.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:16.836Z,1478865556.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:17.201Z,1478865557.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:17.245Z,1478865557.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:17.601Z,1478865557.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:17.675Z,1478865557.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:18.015Z,1478865558.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:18.038Z,1478865558.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:18.401Z,1478865558.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:18.435Z,1478865558.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:18.801Z,1478865558.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:18.837Z,1478865558.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:19.201Z,1478865559.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:19.233Z,1478865559.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:19.601Z,1478865559.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:19.617Z,1478865559.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:20.004Z,1478865560.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:20.036Z,1478865560.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:20.409Z,1478865560.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:20.429Z,1478865560.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:20.802Z,1478865560.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:20.836Z,1478865560.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:21.201Z,1478865561.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:21.233Z,1478865561.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:21.601Z,1478865561.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:21.689Z,1478865561.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:22.001Z,1478865562.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:22.042Z,1478865562.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:22.401Z,1478865562.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:22.439Z,1478865562.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:22.805Z,1478865562.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:22.838Z,1478865562.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:23.205Z,1478865563.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:23.238Z,1478865563.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:23.601Z,1478865563.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:23.644Z,1478865563.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:24.009Z,1478865564.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:24.036Z,1478865564.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:24.409Z,1478865564.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:24.434Z,1478865564.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:24.805Z,1478865564.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:24.837Z,1478865564.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:25.204Z,1478865565.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:25.251Z,1478865565.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:25.606Z,1478865565.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:25.641Z,1478865565.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:26.001Z,1478865566.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:26.033Z,1478865566.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:26.404Z,1478865566.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:26.456Z,1478865566.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:26.822Z,1478865566.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:26.842Z,1478865566.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:27.185Z,1478865567.185 [NAL9602](INFO): NAL9602 initialized
2016-11-11T11:59:27.201Z,1478865567.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:27.241Z,1478865567.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:27.602Z,1478865567.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:27.637Z,1478865567.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:28.012Z,1478865568.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:28.073Z,1478865568.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:28.416Z,1478865568.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:28.440Z,1478865568.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:28.820Z,1478865568.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:28.856Z,1478865568.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:29.208Z,1478865569.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:29.259Z,1478865569.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:29.609Z,1478865569.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:29.699Z,1478865569.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:30.020Z,1478865570.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:30.069Z,1478865570.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:30.418Z,1478865570.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:30.470Z,1478865570.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:30.812Z,1478865570.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:30.839Z,1478865570.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:31.213Z,1478865571.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:31.248Z,1478865571.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:31.605Z,1478865571.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:31.688Z,1478865571.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:32.008Z,1478865572.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:32.024Z,1478865572.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:32.416Z,1478865572.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:32.431Z,1478865572.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:32.804Z,1478865572.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:32.828Z,1478865572.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:33.201Z,1478865573.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:33.234Z,1478865573.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:33.601Z,1478865573.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:33.689Z,1478865573.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:34.001Z,1478865574.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:34.021Z,1478865574.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:34.406Z,1478865574.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:34.422Z,1478865574.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:34.821Z,1478865574.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:34.854Z,1478865574.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:35.212Z,1478865575.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:35.256Z,1478865575.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:35.626Z,1478865575.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:35.716Z,1478865575.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:36.025Z,1478865576.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:36.055Z,1478865576.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:36.405Z,1478865576.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:36.447Z,1478865576.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:36.807Z,1478865576.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:36.822Z,1478865576.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:37.209Z,1478865577.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:37.229Z,1478865577.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:37.609Z,1478865577.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:37.626Z,1478865577.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:38.008Z,1478865578.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:38.027Z,1478865578.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:38.404Z,1478865578.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:38.429Z,1478865578.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:38.805Z,1478865578.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:38.848Z,1478865578.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:39.201Z,1478865579.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:39.230Z,1478865579.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:39.602Z,1478865579.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:39.634Z,1478865579.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:40.016Z,1478865580.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:40.047Z,1478865580.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:40.412Z,1478865580.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:40.439Z,1478865580.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:40.815Z,1478865580.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:40.843Z,1478865580.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:41.222Z,1478865581.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:41.280Z,1478865581.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:41.607Z,1478865581.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:41.651Z,1478865581.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:42.005Z,1478865582.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:42.024Z,1478865582.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:42.401Z,1478865582.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:42.457Z,1478865582.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:42.806Z,1478865582.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:42.845Z,1478865582.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:43.205Z,1478865583.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:43.247Z,1478865583.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:43.613Z,1478865583.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:43.706Z,1478865583.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:44.001Z,1478865584.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:44.045Z,1478865584.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:44.402Z,1478865584.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:44.419Z,1478865584.419 [PNI_TCM](ERROR): CRC does not match. Expected:0x55913 got:0x4396
2016-11-11T11:59:44.465Z,1478865584.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:44.823Z,1478865584.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:44.885Z,1478865584.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:45.219Z,1478865585.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:45.238Z,1478865585.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:45.622Z,1478865585.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:45.690Z,1478865585.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:46.002Z,1478865586.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:46.021Z,1478865586.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:46.408Z,1478865586.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:46.449Z,1478865586.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:46.809Z,1478865586.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:46.847Z,1478865586.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:47.215Z,1478865587.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:47.232Z,1478865587.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:47.647Z,1478865587.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:47.686Z,1478865587.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:48.006Z,1478865588.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:48.044Z,1478865588.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:48.401Z,1478865588.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:48.447Z,1478865588.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:48.801Z,1478865588.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:48.820Z,1478865588.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:49.224Z,1478865589.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:49.251Z,1478865589.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:49.620Z,1478865589.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:49.670Z,1478865589.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:50.017Z,1478865590.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:50.034Z,1478865590.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:50.422Z,1478865590.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:50.458Z,1478865590.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:50.810Z,1478865590.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:50.826Z,1478865590.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:51.208Z,1478865591.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:51.241Z,1478865591.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:51.602Z,1478865591.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:51.639Z,1478865591.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:52.002Z,1478865592.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:52.029Z,1478865592.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:52.418Z,1478865592.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:52.434Z,1478865592.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:52.804Z,1478865592.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:52.833Z,1478865592.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:53.204Z,1478865593.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:53.242Z,1478865593.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:53.603Z,1478865593.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:53.631Z,1478865593.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:54.012Z,1478865594.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:54.036Z,1478865594.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:54.416Z,1478865594.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:54.446Z,1478865594.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:54.815Z,1478865594.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:54.847Z,1478865594.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:58.276Z,1478865598.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:58.322Z,1478865598.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:58.441Z,1478865598.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:58.466Z,1478865598.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:58.810Z,1478865598.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:58.842Z,1478865598.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:59.211Z,1478865599.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:59.246Z,1478865599.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T11:59:59.651Z,1478865599.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T11:59:59.711Z,1478865599.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:00.029Z,1478865600.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:00.045Z,1478865600.045 [BPC1](ERROR): Failed to receive battery data
2016-11-11T12:00:00.045Z,1478865600.045 [BPC1] Communications Fault, FailCount= 1
2016-11-11T12:00:00.045Z,1478865600.045 [BPC1](ERROR): Communications Fault
2016-11-11T12:00:00.053Z,1478865600.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:00.074Z,1478865600.074 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T12:00:00.428Z,1478865600.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:00.454Z,1478865600.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:00.828Z,1478865600.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:00.861Z,1478865600.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:01.215Z,1478865601.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:01.237Z,1478865601.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:01.290Z,1478865601.290 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:00:01.290Z,1478865601.290 [BPC1] No Fault, FailCount= 1
2016-11-11T12:00:01.652Z,1478865601.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:01.830Z,1478865601.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:02.017Z,1478865602.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:02.068Z,1478865602.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:02.417Z,1478865602.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:02.438Z,1478865602.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:02.818Z,1478865602.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:02.857Z,1478865602.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:03.214Z,1478865603.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:03.235Z,1478865603.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:03.618Z,1478865603.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:03.686Z,1478865603.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:04.015Z,1478865604.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:04.031Z,1478865604.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:04.416Z,1478865604.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:04.437Z,1478865604.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:04.826Z,1478865604.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:04.845Z,1478865604.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:05.231Z,1478865605.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:05.253Z,1478865605.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:05.615Z,1478865605.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:05.637Z,1478865605.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:06.011Z,1478865606.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:06.045Z,1478865606.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:06.432Z,1478865606.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:06.447Z,1478865606.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:06.820Z,1478865606.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:06.876Z,1478865606.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:07.210Z,1478865607.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:07.249Z,1478865607.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:07.611Z,1478865607.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:07.650Z,1478865607.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:08.012Z,1478865608.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:08.075Z,1478865608.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:08.415Z,1478865608.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:08.437Z,1478865608.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:08.820Z,1478865608.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:08.841Z,1478865608.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:09.216Z,1478865609.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:09.236Z,1478865609.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:09.624Z,1478865609.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:09.640Z,1478865609.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:10.032Z,1478865610.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:10.101Z,1478865610.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:10.412Z,1478865610.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:10.440Z,1478865610.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:10.813Z,1478865610.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:10.849Z,1478865610.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:11.217Z,1478865611.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:11.257Z,1478865611.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:11.640Z,1478865611.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:11.680Z,1478865611.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:12.020Z,1478865612.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:12.041Z,1478865612.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:12.410Z,1478865612.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:12.445Z,1478865612.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:12.810Z,1478865612.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:12.846Z,1478865612.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:13.209Z,1478865613.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:13.252Z,1478865613.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:13.656Z,1478865613.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:13.698Z,1478865613.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:14.009Z,1478865614.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:14.045Z,1478865614.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:14.409Z,1478865614.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:14.489Z,1478865614.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:14.809Z,1478865614.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:14.826Z,1478865614.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:15.228Z,1478865615.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:15.281Z,1478865615.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:15.634Z,1478865615.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:15.670Z,1478865615.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:16.016Z,1478865616.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:16.065Z,1478865616.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:16.416Z,1478865616.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:16.465Z,1478865616.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:16.816Z,1478865616.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:16.837Z,1478865616.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:17.216Z,1478865617.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:17.231Z,1478865617.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:17.631Z,1478865617.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:17.655Z,1478865617.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:18.021Z,1478865618.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:18.036Z,1478865618.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:18.417Z,1478865618.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:18.449Z,1478865618.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:18.810Z,1478865618.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:18.831Z,1478865618.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:19.230Z,1478865619.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:19.249Z,1478865619.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:19.632Z,1478865619.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:19.677Z,1478865619.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:20.012Z,1478865620.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:20.037Z,1478865620.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:20.409Z,1478865620.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:20.444Z,1478865620.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:20.810Z,1478865620.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:20.850Z,1478865620.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:21.209Z,1478865621.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:21.237Z,1478865621.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:21.609Z,1478865621.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:21.645Z,1478865621.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:22.020Z,1478865622.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:22.117Z,1478865622.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:22.409Z,1478865622.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:22.449Z,1478865622.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:22.813Z,1478865622.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:22.849Z,1478865622.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:23.213Z,1478865623.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:23.233Z,1478865623.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:23.632Z,1478865623.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:23.657Z,1478865623.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:24.078Z,1478865624.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:24.123Z,1478865624.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:24.424Z,1478865624.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:24.440Z,1478865624.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:24.824Z,1478865624.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:24.852Z,1478865624.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:25.209Z,1478865625.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:25.234Z,1478865625.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:25.616Z,1478865625.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:25.653Z,1478865625.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:26.018Z,1478865626.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:26.034Z,1478865626.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:26.417Z,1478865626.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:26.437Z,1478865626.437 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:26.437Z,1478865626.437 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 124
2016-11-11T12:00:26.438Z,1478865626.438 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:00:26.465Z,1478865626.464 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:26.465Z,1478865626.465 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 124
2016-11-11T12:00:26.465Z,1478865626.465 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:00:26.467Z,1478865626.467 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:26.471Z,1478865626.471 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 124
2016-11-11T12:00:26.471Z,1478865626.471 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:00:26.494Z,1478865626.494 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:00:26.495Z,1478865626.494 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:00:26.495Z,1478865626.495 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:00:26.822Z,1478865626.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:26.875Z,1478865626.875 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:00:26.879Z,1478865626.879 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 124
2016-11-11T12:00:26.880Z,1478865626.880 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:00:26.880Z,1478865626.880 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 124
2016-11-11T12:00:26.881Z,1478865626.881 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:00:26.881Z,1478865626.881 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 124
2016-11-11T12:00:27.212Z,1478865627.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:27.243Z,1478865627.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:00:27.243Z,1478865627.243 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:00:27.244Z,1478865627.244 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:00:27.248Z,1478865627.248 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:00:27.249Z,1478865627.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:00:27.249Z,1478865627.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:00:27.250Z,1478865627.250 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:00:27.250Z,1478865627.250 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:00:27.250Z,1478865627.250 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:00:27.627Z,1478865627.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:27.655Z,1478865627.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:28.014Z,1478865628.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:28.049Z,1478865628.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:28.431Z,1478865628.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:28.504Z,1478865628.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:28.820Z,1478865628.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:28.890Z,1478865628.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:29.224Z,1478865629.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:29.251Z,1478865629.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:29.630Z,1478865629.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:29.694Z,1478865629.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:30.013Z,1478865630.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:30.049Z,1478865630.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:30.414Z,1478865630.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:30.461Z,1478865630.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:30.815Z,1478865630.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:30.861Z,1478865630.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:31.215Z,1478865631.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:31.230Z,1478865631.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:31.619Z,1478865631.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:31.665Z,1478865631.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:32.013Z,1478865632.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:32.034Z,1478865632.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:32.417Z,1478865632.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:32.432Z,1478865632.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:32.812Z,1478865632.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:32.845Z,1478865632.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:33.227Z,1478865633.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:33.242Z,1478865633.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:33.637Z,1478865633.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:33.705Z,1478865633.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:34.034Z,1478865634.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:34.061Z,1478865634.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:34.424Z,1478865634.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:34.461Z,1478865634.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:34.813Z,1478865634.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:34.855Z,1478865634.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:35.215Z,1478865635.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:35.239Z,1478865635.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:35.612Z,1478865635.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:35.640Z,1478865635.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:36.080Z,1478865636.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:36.156Z,1478865636.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:36.417Z,1478865636.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:36.434Z,1478865636.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:36.812Z,1478865636.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:36.837Z,1478865636.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:37.216Z,1478865637.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:37.237Z,1478865637.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:37.617Z,1478865637.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:37.634Z,1478865637.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:38.045Z,1478865638.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:38.085Z,1478865638.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:38.429Z,1478865638.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:38.461Z,1478865638.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:38.809Z,1478865638.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:38.848Z,1478865638.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:39.209Z,1478865639.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:39.249Z,1478865639.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:39.618Z,1478865639.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:39.653Z,1478865639.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:40.022Z,1478865640.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:40.037Z,1478865640.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:40.416Z,1478865640.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:40.432Z,1478865640.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:40.824Z,1478865640.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:40.845Z,1478865640.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:41.220Z,1478865641.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:41.241Z,1478865641.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:41.623Z,1478865641.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:41.657Z,1478865641.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:42.013Z,1478865642.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:42.036Z,1478865642.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:42.414Z,1478865642.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:42.477Z,1478865642.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:42.812Z,1478865642.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:42.865Z,1478865642.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:43.209Z,1478865643.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:43.243Z,1478865643.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:43.612Z,1478865643.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:43.675Z,1478865643.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:44.009Z,1478865644.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:44.041Z,1478865644.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:44.409Z,1478865644.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:44.458Z,1478865644.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:44.809Z,1478865644.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:44.865Z,1478865644.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:45.209Z,1478865645.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:45.241Z,1478865645.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:45.609Z,1478865645.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:45.645Z,1478865645.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:46.009Z,1478865646.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:46.045Z,1478865646.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:46.409Z,1478865646.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:46.449Z,1478865646.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:46.809Z,1478865646.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:46.829Z,1478865646.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:47.209Z,1478865647.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:47.229Z,1478865647.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:47.618Z,1478865647.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:47.672Z,1478865647.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:48.021Z,1478865648.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:48.041Z,1478865648.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:48.416Z,1478865648.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:48.431Z,1478865648.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:48.812Z,1478865648.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:48.845Z,1478865648.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:49.216Z,1478865649.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:49.232Z,1478865649.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:49.631Z,1478865649.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:49.653Z,1478865649.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:50.039Z,1478865650.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:50.083Z,1478865650.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:50.409Z,1478865650.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:50.441Z,1478865650.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:50.809Z,1478865650.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:50.842Z,1478865650.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:51.209Z,1478865651.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:51.245Z,1478865651.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:51.609Z,1478865651.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:51.645Z,1478865651.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:52.020Z,1478865652.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:52.082Z,1478865652.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:52.414Z,1478865652.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:52.429Z,1478865652.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:52.811Z,1478865652.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:52.845Z,1478865652.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:53.212Z,1478865653.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:53.232Z,1478865653.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:53.617Z,1478865653.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:53.637Z,1478865653.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:54.012Z,1478865654.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:54.040Z,1478865654.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:54.417Z,1478865654.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:54.437Z,1478865654.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:54.810Z,1478865654.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:54.842Z,1478865654.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:58.435Z,1478865658.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:58.517Z,1478865658.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:58.609Z,1478865658.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:58.642Z,1478865658.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:58.996Z,1478865658.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:59.017Z,1478865659.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:59.390Z,1478865659.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:59.438Z,1478865659.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:00:59.798Z,1478865659.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:00:59.830Z,1478865659.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:00.193Z,1478865660.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:00.245Z,1478865660.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:00.593Z,1478865660.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:00.645Z,1478865660.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:00.989Z,1478865660.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:01.009Z,1478865661.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:01.393Z,1478865661.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:01.413Z,1478865661.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:01.798Z,1478865661.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:01.813Z,1478865661.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:02.197Z,1478865662.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:02.212Z,1478865662.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:02.604Z,1478865662.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:02.625Z,1478865662.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:03.004Z,1478865663.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:03.019Z,1478865663.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:03.392Z,1478865663.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:03.420Z,1478865663.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:03.801Z,1478865663.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:03.816Z,1478865663.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:04.196Z,1478865664.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:04.220Z,1478865664.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:04.592Z,1478865664.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:04.624Z,1478865664.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:04.996Z,1478865664.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:05.017Z,1478865665.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:05.398Z,1478865665.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:05.417Z,1478865665.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:05.793Z,1478865665.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:05.815Z,1478865665.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:06.189Z,1478865666.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:06.221Z,1478865666.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:06.602Z,1478865666.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:06.617Z,1478865666.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:07.011Z,1478865667.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:07.026Z,1478865667.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:07.407Z,1478865667.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:07.429Z,1478865667.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:07.812Z,1478865667.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:07.839Z,1478865667.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:08.204Z,1478865668.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:08.229Z,1478865668.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:08.598Z,1478865668.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:08.614Z,1478865668.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:08.990Z,1478865668.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:09.017Z,1478865669.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:09.398Z,1478865669.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:09.413Z,1478865669.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:09.801Z,1478865669.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:09.823Z,1478865669.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:10.190Z,1478865670.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:10.229Z,1478865670.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:10.590Z,1478865670.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:10.621Z,1478865670.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:10.993Z,1478865670.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:11.028Z,1478865671.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:11.390Z,1478865671.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:11.421Z,1478865671.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:11.798Z,1478865671.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:11.833Z,1478865671.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:12.204Z,1478865672.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:12.237Z,1478865672.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:12.600Z,1478865672.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:12.699Z,1478865672.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:13.004Z,1478865673.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:13.028Z,1478865673.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:13.400Z,1478865673.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:13.445Z,1478865673.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:13.790Z,1478865673.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:13.817Z,1478865673.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:14.194Z,1478865674.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:14.258Z,1478865674.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:14.597Z,1478865674.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:14.655Z,1478865674.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:14.990Z,1478865674.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:15.022Z,1478865675.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:15.394Z,1478865675.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:15.419Z,1478865675.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:15.798Z,1478865675.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:15.823Z,1478865675.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:16.190Z,1478865676.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:16.225Z,1478865676.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:16.594Z,1478865676.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:16.619Z,1478865676.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:17.011Z,1478865677.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:17.033Z,1478865677.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:17.413Z,1478865677.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:17.428Z,1478865677.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:17.804Z,1478865677.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:17.841Z,1478865677.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:18.221Z,1478865678.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:18.241Z,1478865678.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:18.594Z,1478865678.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:18.619Z,1478865678.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:18.997Z,1478865678.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:19.017Z,1478865679.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:19.392Z,1478865679.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:19.425Z,1478865679.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:19.798Z,1478865679.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:19.826Z,1478865679.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:20.205Z,1478865680.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:20.221Z,1478865680.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:20.597Z,1478865680.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:20.619Z,1478865680.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:20.990Z,1478865680.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:21.022Z,1478865681.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:21.394Z,1478865681.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:21.425Z,1478865681.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:21.792Z,1478865681.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:21.820Z,1478865681.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:22.211Z,1478865682.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:22.233Z,1478865682.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:22.607Z,1478865682.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:22.623Z,1478865682.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:23.015Z,1478865683.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:23.031Z,1478865683.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:23.412Z,1478865683.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:23.426Z,1478865683.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:23.801Z,1478865683.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:23.835Z,1478865683.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:24.192Z,1478865684.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:24.218Z,1478865684.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:24.598Z,1478865684.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:24.617Z,1478865684.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:25.005Z,1478865685.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:25.029Z,1478865685.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:25.405Z,1478865685.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:25.425Z,1478865685.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:25.789Z,1478865685.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:25.809Z,1478865685.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:26.193Z,1478865686.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:26.209Z,1478865686.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:26.597Z,1478865686.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:26.677Z,1478865686.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:26.998Z,1478865686.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:27.013Z,1478865687.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:27.404Z,1478865687.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:27.475Z,1478865687.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:27.807Z,1478865687.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:27.822Z,1478865687.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:28.212Z,1478865688.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:28.262Z,1478865688.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:28.614Z,1478865688.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:28.637Z,1478865688.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:28.989Z,1478865688.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:29.045Z,1478865689.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:29.390Z,1478865689.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:29.422Z,1478865689.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:29.790Z,1478865689.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:29.817Z,1478865689.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:30.194Z,1478865690.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:30.221Z,1478865690.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:30.590Z,1478865690.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:30.626Z,1478865690.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:30.990Z,1478865690.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:31.026Z,1478865691.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:31.394Z,1478865691.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:31.420Z,1478865691.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:31.795Z,1478865691.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:31.821Z,1478865691.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:32.189Z,1478865692.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:32.226Z,1478865692.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:32.607Z,1478865692.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:32.640Z,1478865692.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:33.013Z,1478865693.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:33.028Z,1478865693.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:33.408Z,1478865693.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:33.437Z,1478865693.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:33.800Z,1478865693.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:33.836Z,1478865693.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:34.190Z,1478865694.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:34.217Z,1478865694.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:34.592Z,1478865694.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:34.620Z,1478865694.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:34.993Z,1478865694.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:35.015Z,1478865695.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:35.390Z,1478865695.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:35.460Z,1478865695.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:35.789Z,1478865695.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:35.822Z,1478865695.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:36.193Z,1478865696.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:36.231Z,1478865696.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:36.593Z,1478865696.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:36.608Z,1478865696.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:36.997Z,1478865696.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:37.017Z,1478865697.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:37.393Z,1478865697.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:37.412Z,1478865697.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:37.803Z,1478865697.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:37.841Z,1478865697.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:38.208Z,1478865698.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:38.249Z,1478865698.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:38.604Z,1478865698.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:38.629Z,1478865698.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:39.012Z,1478865699.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:39.041Z,1478865699.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:39.394Z,1478865699.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:39.410Z,1478865699.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:39.801Z,1478865699.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:39.837Z,1478865699.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:40.197Z,1478865700.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:40.212Z,1478865700.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:40.593Z,1478865700.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:40.616Z,1478865700.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:41.001Z,1478865701.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:41.125Z,1478865701.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:41.397Z,1478865701.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:41.413Z,1478865701.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:41.789Z,1478865701.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:41.843Z,1478865701.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:42.193Z,1478865702.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:42.230Z,1478865702.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:42.590Z,1478865702.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:42.635Z,1478865702.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:43.004Z,1478865703.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:43.071Z,1478865703.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:43.404Z,1478865703.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:43.447Z,1478865703.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:43.822Z,1478865703.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:43.842Z,1478865703.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:44.204Z,1478865704.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:44.232Z,1478865704.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:44.605Z,1478865704.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:44.629Z,1478865704.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:44.996Z,1478865704.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:45.011Z,1478865705.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:45.393Z,1478865705.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:45.413Z,1478865705.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:45.794Z,1478865705.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:45.814Z,1478865705.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:46.197Z,1478865706.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:46.212Z,1478865706.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:46.592Z,1478865706.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:46.624Z,1478865706.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:47.000Z,1478865707.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:47.025Z,1478865707.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:47.390Z,1478865707.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:47.419Z,1478865707.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:47.789Z,1478865707.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:47.838Z,1478865707.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:48.212Z,1478865708.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:48.227Z,1478865708.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:48.607Z,1478865708.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:48.632Z,1478865708.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:49.006Z,1478865709.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:49.025Z,1478865709.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:49.420Z,1478865709.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:49.481Z,1478865709.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:49.790Z,1478865709.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:49.814Z,1478865709.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:50.190Z,1478865710.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:50.225Z,1478865710.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:50.601Z,1478865710.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:50.620Z,1478865710.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:50.994Z,1478865710.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:51.029Z,1478865711.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:51.394Z,1478865711.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:51.480Z,1478865711.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:51.793Z,1478865711.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:51.828Z,1478865711.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:52.190Z,1478865712.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:52.230Z,1478865712.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:52.590Z,1478865712.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:52.625Z,1478865712.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:52.989Z,1478865712.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:53.028Z,1478865713.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:53.431Z,1478865713.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:53.500Z,1478865713.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:53.800Z,1478865713.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:53.837Z,1478865713.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:54.208Z,1478865714.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:54.249Z,1478865714.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:54.604Z,1478865714.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:54.639Z,1478865714.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:54.995Z,1478865714.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:55.073Z,1478865715.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:58.614Z,1478865718.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:58.629Z,1478865718.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:58.733Z,1478865718.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:58.759Z,1478865718.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:59.128Z,1478865719.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:59.164Z,1478865719.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:59.520Z,1478865719.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:59.566Z,1478865719.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:01:59.936Z,1478865719.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:01:59.968Z,1478865719.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:00.313Z,1478865720.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:00.374Z,1478865720.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:00.705Z,1478865720.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:00.769Z,1478865720.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:01.106Z,1478865721.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:01.141Z,1478865721.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:01.506Z,1478865721.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:01.537Z,1478865721.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:01.946Z,1478865721.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:01.987Z,1478865721.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:02.306Z,1478865722.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:02.345Z,1478865722.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:02.706Z,1478865722.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:02.725Z,1478865722.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:03.109Z,1478865723.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:03.130Z,1478865723.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:03.520Z,1478865723.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:03.552Z,1478865723.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:03.920Z,1478865723.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:03.948Z,1478865723.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:04.319Z,1478865724.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:04.335Z,1478865724.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:04.718Z,1478865724.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:04.737Z,1478865724.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:05.112Z,1478865725.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:05.128Z,1478865725.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:05.513Z,1478865725.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:05.530Z,1478865725.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:05.908Z,1478865725.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:05.940Z,1478865725.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:06.317Z,1478865726.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:06.337Z,1478865726.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:06.705Z,1478865726.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:06.740Z,1478865726.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:07.105Z,1478865727.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:07.137Z,1478865727.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:07.521Z,1478865727.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:07.536Z,1478865727.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:07.922Z,1478865727.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:07.937Z,1478865727.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:08.305Z,1478865728.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:08.337Z,1478865728.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:08.731Z,1478865728.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:08.747Z,1478865728.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:09.132Z,1478865729.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:09.153Z,1478865729.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:09.525Z,1478865729.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:09.546Z,1478865729.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:09.927Z,1478865729.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:09.943Z,1478865729.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:10.314Z,1478865730.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:10.340Z,1478865730.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:10.706Z,1478865730.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:10.741Z,1478865730.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:11.105Z,1478865731.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:11.137Z,1478865731.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:11.522Z,1478865731.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:11.580Z,1478865731.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:11.912Z,1478865731.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:11.927Z,1478865731.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:12.313Z,1478865732.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:12.329Z,1478865732.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:12.713Z,1478865732.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:12.785Z,1478865732.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:13.113Z,1478865733.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:13.129Z,1478865733.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:13.512Z,1478865733.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:13.567Z,1478865733.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:13.926Z,1478865733.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:13.953Z,1478865733.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:14.331Z,1478865734.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:14.380Z,1478865734.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:14.735Z,1478865734.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:14.750Z,1478865734.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:15.128Z,1478865735.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:15.179Z,1478865735.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:15.505Z,1478865735.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:15.537Z,1478865735.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:15.911Z,1478865735.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:15.947Z,1478865735.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:16.306Z,1478865736.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:16.338Z,1478865736.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:16.705Z,1478865736.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:16.737Z,1478865736.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:17.113Z,1478865737.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:17.149Z,1478865737.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:17.505Z,1478865737.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:17.536Z,1478865737.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:17.917Z,1478865737.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:17.949Z,1478865737.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:18.309Z,1478865738.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:18.329Z,1478865738.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:18.709Z,1478865738.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:18.729Z,1478865738.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:19.120Z,1478865739.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:19.136Z,1478865739.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:19.528Z,1478865739.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:19.544Z,1478865739.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:19.923Z,1478865739.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:19.938Z,1478865739.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:20.323Z,1478865740.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:20.338Z,1478865740.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:20.706Z,1478865740.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:20.741Z,1478865740.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:21.106Z,1478865741.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:21.141Z,1478865741.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:21.514Z,1478865741.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:21.549Z,1478865741.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:21.905Z,1478865741.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:21.938Z,1478865741.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:22.306Z,1478865742.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:22.322Z,1478865742.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:22.705Z,1478865742.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:22.721Z,1478865742.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:23.105Z,1478865743.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:23.121Z,1478865743.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:23.510Z,1478865743.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:23.530Z,1478865743.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:23.912Z,1478865743.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:23.933Z,1478865743.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:24.322Z,1478865744.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:24.346Z,1478865744.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:24.726Z,1478865744.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:24.750Z,1478865744.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:25.127Z,1478865745.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:25.143Z,1478865745.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:25.531Z,1478865745.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:25.563Z,1478865745.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:25.906Z,1478865745.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:25.937Z,1478865745.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:26.309Z,1478865746.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:26.326Z,1478865746.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:26.709Z,1478865746.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:26.725Z,1478865746.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:27.109Z,1478865747.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:27.189Z,1478865747.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:27.508Z,1478865747.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:27.541Z,1478865747.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:27.911Z,1478865747.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:27.967Z,1478865747.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:28.313Z,1478865748.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:28.333Z,1478865748.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:28.705Z,1478865748.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:28.763Z,1478865748.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:29.105Z,1478865749.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:29.169Z,1478865749.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:29.528Z,1478865749.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:29.553Z,1478865749.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:29.917Z,1478865749.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:29.953Z,1478865749.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:30.324Z,1478865750.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:30.352Z,1478865750.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:30.725Z,1478865750.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:30.752Z,1478865750.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:31.107Z,1478865751.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:31.176Z,1478865751.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:31.511Z,1478865751.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:31.551Z,1478865751.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:31.908Z,1478865751.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:31.956Z,1478865751.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:32.325Z,1478865752.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:32.365Z,1478865752.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:32.713Z,1478865752.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:32.741Z,1478865752.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:33.115Z,1478865753.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:33.163Z,1478865753.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:33.507Z,1478865753.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:33.545Z,1478865753.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:33.911Z,1478865753.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:33.959Z,1478865753.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:34.316Z,1478865754.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:34.337Z,1478865754.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:34.729Z,1478865754.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:34.745Z,1478865754.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:35.125Z,1478865755.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:35.153Z,1478865755.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:35.521Z,1478865755.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:35.557Z,1478865755.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:35.925Z,1478865755.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:35.966Z,1478865755.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:36.310Z,1478865756.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:36.358Z,1478865756.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:36.706Z,1478865756.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:36.777Z,1478865756.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:37.107Z,1478865757.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:37.148Z,1478865757.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:37.506Z,1478865757.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:37.546Z,1478865757.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:37.916Z,1478865757.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:37.938Z,1478865757.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:38.315Z,1478865758.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:38.339Z,1478865758.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:38.705Z,1478865758.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:38.741Z,1478865758.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:39.114Z,1478865759.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:39.167Z,1478865759.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:39.512Z,1478865759.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:39.553Z,1478865759.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:39.932Z,1478865759.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:39.948Z,1478865759.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:39.965Z,1478865759.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:40.349Z,1478865760.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:40.369Z,1478865760.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:40.720Z,1478865760.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:40.736Z,1478865760.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:40.744Z,1478865760.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:41.160Z,1478865761.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:41.221Z,1478865761.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:41.510Z,1478865761.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:41.525Z,1478865761.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:41.540Z,1478865761.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:41.918Z,1478865761.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:41.973Z,1478865761.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:42.309Z,1478865762.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:42.329Z,1478865762.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:42.336Z,1478865762.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:42.724Z,1478865762.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:42.774Z,1478865762.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:43.105Z,1478865763.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:43.132Z,1478865763.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:43.153Z,1478865763.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:43.523Z,1478865763.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:43.538Z,1478865763.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:43.921Z,1478865763.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:43.928Z,1478865763.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:43.946Z,1478865763.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:44.307Z,1478865764.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:44.342Z,1478865764.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:44.706Z,1478865764.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:44.745Z,1478865764.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:45.122Z,1478865765.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:45.157Z,1478865765.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:45.517Z,1478865765.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:45.558Z,1478865765.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:45.924Z,1478865765.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:45.954Z,1478865765.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:46.322Z,1478865766.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:46.338Z,1478865766.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:46.706Z,1478865766.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:46.733Z,1478865766.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:47.106Z,1478865767.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:47.142Z,1478865767.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:47.507Z,1478865767.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:47.560Z,1478865767.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:47.915Z,1478865767.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:47.961Z,1478865767.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:48.315Z,1478865768.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:48.345Z,1478865768.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:48.718Z,1478865768.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:48.754Z,1478865768.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:49.107Z,1478865769.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:49.164Z,1478865769.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:49.512Z,1478865769.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:49.570Z,1478865769.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:49.925Z,1478865769.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:49.978Z,1478865769.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:50.329Z,1478865770.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:50.378Z,1478865770.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:50.723Z,1478865770.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:50.742Z,1478865770.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:51.138Z,1478865771.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:51.188Z,1478865771.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:51.560Z,1478865771.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:51.584Z,1478865771.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:51.916Z,1478865771.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:51.940Z,1478865771.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:52.317Z,1478865772.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:52.342Z,1478865772.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:52.708Z,1478865772.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:52.748Z,1478865772.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:52.756Z,1478865772.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:53.107Z,1478865773.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:53.154Z,1478865773.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:53.524Z,1478865773.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:53.544Z,1478865773.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:53.595Z,1478865773.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:53.911Z,1478865773.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:53.952Z,1478865773.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:53.952Z,1478865773.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:54.312Z,1478865774.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:54.345Z,1478865774.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:54.707Z,1478865774.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:54.748Z,1478865774.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:54.793Z,1478865774.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:55.112Z,1478865775.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:55.182Z,1478865775.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:02:55.544Z,1478865775.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:56.196Z,1478865776.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:56.992Z,1478865776.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:57.788Z,1478865777.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:58.200Z,1478865778.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:58.996Z,1478865778.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:02:59.736Z,1478865779.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:00.532Z,1478865780.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:01.329Z,1478865781.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:01.535Z,1478865781.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:01.557Z,1478865781.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:01.678Z,1478865781.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:01.709Z,1478865781.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:01.740Z,1478865781.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:02.048Z,1478865782.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:02.102Z,1478865782.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:02.448Z,1478865782.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:02.464Z,1478865782.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:02.536Z,1478865782.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:02.841Z,1478865782.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:02.887Z,1478865782.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:03.241Z,1478865783.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:03.332Z,1478865783.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:03.347Z,1478865783.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:03.633Z,1478865783.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:03.673Z,1478865783.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:03.744Z,1478865783.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:04.033Z,1478865784.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:04.049Z,1478865784.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:04.437Z,1478865784.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:04.457Z,1478865784.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:04.540Z,1478865784.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:04.840Z,1478865784.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:04.856Z,1478865784.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:05.241Z,1478865785.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:05.257Z,1478865785.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:05.337Z,1478865785.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:05.645Z,1478865785.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:05.666Z,1478865785.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:05.748Z,1478865785.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:06.050Z,1478865786.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:06.065Z,1478865786.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:06.452Z,1478865786.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:06.480Z,1478865786.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:06.544Z,1478865786.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:06.855Z,1478865786.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:06.871Z,1478865786.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:07.257Z,1478865787.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:07.272Z,1478865787.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:07.340Z,1478865787.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:07.644Z,1478865787.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:07.676Z,1478865787.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:07.820Z,1478865787.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:08.037Z,1478865788.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:08.057Z,1478865788.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:08.441Z,1478865788.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:08.456Z,1478865788.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:08.616Z,1478865788.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:08.839Z,1478865788.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:08.871Z,1478865788.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:09.241Z,1478865789.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:09.256Z,1478865789.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:09.412Z,1478865789.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:09.641Z,1478865789.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:09.657Z,1478865789.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:10.040Z,1478865790.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:10.060Z,1478865790.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:10.176Z,1478865790.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:10.433Z,1478865790.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:10.466Z,1478865790.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:10.834Z,1478865790.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:10.870Z,1478865790.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:10.972Z,1478865790.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:11.234Z,1478865791.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:11.266Z,1478865791.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:11.652Z,1478865791.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:11.675Z,1478865791.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:11.768Z,1478865791.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:12.044Z,1478865792.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:12.079Z,1478865792.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:12.188Z,1478865792.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:12.448Z,1478865792.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:12.485Z,1478865792.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:12.844Z,1478865792.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:12.873Z,1478865792.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:12.984Z,1478865792.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:13.234Z,1478865793.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:13.254Z,1478865793.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:13.645Z,1478865793.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:13.662Z,1478865793.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:13.712Z,1478865793.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:14.041Z,1478865794.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:14.066Z,1478865794.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:14.442Z,1478865794.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:14.461Z,1478865794.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:14.508Z,1478865794.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:14.836Z,1478865794.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:14.869Z,1478865794.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:15.233Z,1478865795.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:15.312Z,1478865795.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:15.362Z,1478865795.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:15.642Z,1478865795.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:15.669Z,1478865795.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:15.724Z,1478865795.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:16.038Z,1478865796.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:16.117Z,1478865796.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:16.437Z,1478865796.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:16.452Z,1478865796.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:16.520Z,1478865796.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:16.851Z,1478865796.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:16.890Z,1478865796.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:17.244Z,1478865797.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:17.293Z,1478865797.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:17.317Z,1478865797.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:17.652Z,1478865797.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:17.667Z,1478865797.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:18.052Z,1478865798.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:18.073Z,1478865798.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:18.112Z,1478865798.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:18.434Z,1478865798.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:18.452Z,1478865798.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:18.833Z,1478865798.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:18.853Z,1478865798.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:18.908Z,1478865798.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:19.238Z,1478865799.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:19.254Z,1478865799.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:19.633Z,1478865799.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:19.653Z,1478865799.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:19.704Z,1478865799.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:20.037Z,1478865800.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:20.052Z,1478865800.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:20.442Z,1478865800.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:20.457Z,1478865800.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:20.500Z,1478865800.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:20.837Z,1478865800.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:20.857Z,1478865800.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:21.237Z,1478865801.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:21.252Z,1478865801.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:21.296Z,1478865801.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:21.633Z,1478865801.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:21.648Z,1478865801.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:22.048Z,1478865802.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:22.064Z,1478865802.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:22.093Z,1478865802.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:22.444Z,1478865802.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:22.460Z,1478865802.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:22.851Z,1478865802.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:22.867Z,1478865802.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:22.888Z,1478865802.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:23.244Z,1478865803.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:23.262Z,1478865803.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:23.637Z,1478865803.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:23.652Z,1478865803.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:23.684Z,1478865803.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:24.034Z,1478865804.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:24.050Z,1478865804.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:24.438Z,1478865804.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:24.457Z,1478865804.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:24.480Z,1478865804.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:24.837Z,1478865804.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:24.890Z,1478865804.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:25.237Z,1478865805.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:25.257Z,1478865805.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:25.276Z,1478865805.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:25.637Z,1478865805.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:25.657Z,1478865805.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:26.034Z,1478865806.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:26.049Z,1478865806.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:26.072Z,1478865806.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:26.437Z,1478865806.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:26.453Z,1478865806.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:26.833Z,1478865806.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:26.853Z,1478865806.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:26.868Z,1478865806.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:27.255Z,1478865807.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:27.281Z,1478865807.281 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:27.281Z,1478865807.281 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 125
2016-11-11T12:03:27.281Z,1478865807.281 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:03:27.292Z,1478865807.292 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:27.292Z,1478865807.292 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 125
2016-11-11T12:03:27.292Z,1478865807.292 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:03:27.296Z,1478865807.296 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:27.296Z,1478865807.296 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 125
2016-11-11T12:03:27.296Z,1478865807.296 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:03:27.314Z,1478865807.314 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:03:27.314Z,1478865807.314 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:03:27.314Z,1478865807.314 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:03:27.648Z,1478865807.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:27.664Z,1478865807.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:27.687Z,1478865807.687 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:03:27.687Z,1478865807.687 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 125
2016-11-11T12:03:27.688Z,1478865807.688 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:03:27.688Z,1478865807.688 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 125
2016-11-11T12:03:27.689Z,1478865807.689 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:03:27.689Z,1478865807.689 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 125
2016-11-11T12:03:28.053Z,1478865808.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:28.076Z,1478865808.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:03:28.076Z,1478865808.076 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:03:28.077Z,1478865808.077 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:03:28.081Z,1478865808.081 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:03:28.082Z,1478865808.082 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:03:28.082Z,1478865808.082 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:03:28.083Z,1478865808.083 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:03:28.083Z,1478865808.083 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:03:28.084Z,1478865808.084 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:03:28.447Z,1478865808.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:28.460Z,1478865808.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:28.484Z,1478865808.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:28.837Z,1478865808.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:28.853Z,1478865808.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:29.233Z,1478865809.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:29.256Z,1478865809.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:29.289Z,1478865809.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:29.637Z,1478865809.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:29.656Z,1478865809.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:30.038Z,1478865810.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:30.052Z,1478865810.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:30.054Z,1478865810.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:30.437Z,1478865810.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:30.457Z,1478865810.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:30.837Z,1478865810.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:30.848Z,1478865810.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:30.853Z,1478865810.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:31.239Z,1478865811.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:31.264Z,1478865811.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:31.630Z,1478865811.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:31.644Z,1478865811.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:31.647Z,1478865811.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:32.033Z,1478865812.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:32.053Z,1478865812.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:32.440Z,1478865812.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:32.453Z,1478865812.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:32.465Z,1478865812.465 [BPC1](ERROR): Failed to receive battery data
2016-11-11T12:03:32.465Z,1478865812.465 [BPC1] Communications Fault, FailCount= 1
2016-11-11T12:03:32.465Z,1478865812.465 [BPC1](ERROR): Communications Fault
2016-11-11T12:03:32.473Z,1478865812.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:32.493Z,1478865812.493 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T12:03:32.845Z,1478865812.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:32.864Z,1478865812.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:33.236Z,1478865813.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:33.257Z,1478865813.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:33.297Z,1478865813.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:33.648Z,1478865813.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:33.669Z,1478865813.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:33.689Z,1478865813.689 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:03:33.689Z,1478865813.689 [BPC1] No Fault, FailCount= 1
2016-11-11T12:03:34.032Z,1478865814.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:34.039Z,1478865814.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:34.113Z,1478865814.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:34.434Z,1478865814.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:34.464Z,1478865814.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:34.828Z,1478865814.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:34.843Z,1478865814.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:34.859Z,1478865814.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:35.237Z,1478865815.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:35.281Z,1478865815.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:35.625Z,1478865815.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:35.642Z,1478865815.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:35.681Z,1478865815.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:36.033Z,1478865816.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:36.052Z,1478865816.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:36.068Z,1478865816.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:36.434Z,1478865816.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:36.444Z,1478865816.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:36.471Z,1478865816.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:36.834Z,1478865816.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:36.852Z,1478865816.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:36.868Z,1478865816.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:37.234Z,1478865817.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:37.256Z,1478865817.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:37.264Z,1478865817.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:37.651Z,1478865817.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:37.670Z,1478865817.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:37.672Z,1478865817.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:38.044Z,1478865818.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:38.080Z,1478865818.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:38.094Z,1478865818.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:38.449Z,1478865818.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:38.476Z,1478865818.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:38.488Z,1478865818.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:38.845Z,1478865818.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:38.868Z,1478865818.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:38.896Z,1478865818.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:39.235Z,1478865819.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:39.264Z,1478865819.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:39.304Z,1478865819.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:39.634Z,1478865819.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:39.671Z,1478865819.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:39.713Z,1478865819.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:40.034Z,1478865820.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:40.071Z,1478865820.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:40.124Z,1478865820.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:40.433Z,1478865820.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:40.465Z,1478865820.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:40.532Z,1478865820.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:40.849Z,1478865820.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:40.868Z,1478865820.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:41.258Z,1478865821.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:41.317Z,1478865821.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:41.328Z,1478865821.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:41.669Z,1478865821.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:41.684Z,1478865821.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:41.736Z,1478865821.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:42.042Z,1478865822.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:42.075Z,1478865822.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:42.439Z,1478865822.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:42.455Z,1478865822.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:42.532Z,1478865822.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:42.851Z,1478865822.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:42.883Z,1478865822.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:43.296Z,1478865823.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:43.303Z,1478865823.303 [PNI_TCM](ERROR): CRC does not match. Expected:0x44520 got:0x37444
2016-11-11T12:03:43.328Z,1478865823.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:43.353Z,1478865823.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:43.652Z,1478865823.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:43.667Z,1478865823.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:43.736Z,1478865823.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:44.045Z,1478865824.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:44.073Z,1478865824.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:44.444Z,1478865824.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:44.477Z,1478865824.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:44.532Z,1478865824.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:44.834Z,1478865824.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:44.870Z,1478865824.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:45.271Z,1478865825.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:45.320Z,1478865825.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:45.328Z,1478865825.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:45.640Z,1478865825.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:45.668Z,1478865825.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:45.736Z,1478865825.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:46.042Z,1478865826.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:46.082Z,1478865826.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:46.433Z,1478865826.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:46.454Z,1478865826.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:46.532Z,1478865826.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:46.844Z,1478865826.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:46.860Z,1478865826.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:47.274Z,1478865827.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:47.315Z,1478865827.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:47.328Z,1478865827.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:47.634Z,1478865827.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:47.674Z,1478865827.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:47.736Z,1478865827.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:48.067Z,1478865828.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:48.083Z,1478865828.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:48.449Z,1478865828.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:48.497Z,1478865828.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:48.532Z,1478865828.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:48.848Z,1478865828.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:48.877Z,1478865828.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:49.250Z,1478865829.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:49.286Z,1478865829.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:49.329Z,1478865829.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:49.638Z,1478865829.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:49.680Z,1478865829.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:49.768Z,1478865829.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:50.039Z,1478865830.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:50.070Z,1478865830.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:50.445Z,1478865830.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:50.501Z,1478865830.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:50.564Z,1478865830.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:50.841Z,1478865830.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:50.870Z,1478865830.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:51.240Z,1478865831.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:51.248Z,1478865831.248 [PNI_TCM](ERROR): CRC does not match. Expected:0x45162 got:0x29447
2016-11-11T12:03:51.301Z,1478865831.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:51.360Z,1478865831.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:51.643Z,1478865831.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:51.724Z,1478865831.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:52.035Z,1478865832.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:52.075Z,1478865832.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:52.124Z,1478865832.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:52.433Z,1478865832.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:52.470Z,1478865832.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:52.835Z,1478865832.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:52.872Z,1478865832.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:52.920Z,1478865832.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:53.257Z,1478865833.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:53.278Z,1478865833.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:53.648Z,1478865833.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:53.717Z,1478865833.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:53.734Z,1478865833.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:54.045Z,1478865834.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:54.082Z,1478865834.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:54.128Z,1478865834.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:54.453Z,1478865834.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:54.478Z,1478865834.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:54.840Z,1478865834.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:54.879Z,1478865834.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:54.889Z,1478865834.889 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T11:58:54.6Z
2016-11-11T12:03:54.889Z,1478865834.889 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T12:03:54.889Z,1478865834.889 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T12:03:54.924Z,1478865834.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:55.292Z,1478865835.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:55.333Z,1478865835.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:55.656Z,1478865835.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:56.452Z,1478865836.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:57.249Z,1478865837.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:57.660Z,1478865837.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:58.456Z,1478865838.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:59.252Z,1478865839.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:59.342Z,1478865839.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:59.365Z,1478865839.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:59.432Z,1478865839.432 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0168.lzma
2016-11-11T12:03:59.471Z,1478865839.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:59.501Z,1478865839.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:03:59.660Z,1478865839.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:59.863Z,1478865839.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:03:59.885Z,1478865839.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:00.225Z,1478865840.225 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0168.lzma.bak
2016-11-11T12:04:00.225Z,1478865840.225 [DataOverHttps](INFO): SBD MOMSN=4555385
2016-11-11T12:04:00.273Z,1478865840.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:00.313Z,1478865840.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:00.456Z,1478865840.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:01.252Z,1478865841.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:01.616Z,1478865841.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:01.632Z,1478865841.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:01.660Z,1478865841.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:01.738Z,1478865841.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:01.769Z,1478865841.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:02.456Z,1478865842.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:03.252Z,1478865843.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:03.724Z,1478865843.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:04.520Z,1478865844.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:05.184Z,1478865845.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:05.265Z,1478865845.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:05.316Z,1478865845.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:05.361Z,1478865845.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:05.384Z,1478865845.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:05.748Z,1478865845.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:05.773Z,1478865845.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:06.076Z,1478865846.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:06.154Z,1478865846.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:06.205Z,1478865846.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:06.536Z,1478865846.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:06.568Z,1478865846.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:06.872Z,1478865846.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:06.933Z,1478865846.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:06.997Z,1478865846.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:07.669Z,1478865847.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:08.084Z,1478865848.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:08.880Z,1478865848.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:09.608Z,1478865849.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:10.404Z,1478865850.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:10.500Z,1478865850.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:10.538Z,1478865850.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:10.612Z,1478865850.612 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0169.lzma
2016-11-11T12:04:10.659Z,1478865850.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:10.701Z,1478865850.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:11.028Z,1478865851.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:11.061Z,1478865851.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:11.201Z,1478865851.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:11.389Z,1478865851.389 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0169.lzma.bak
2016-11-11T12:04:11.389Z,1478865851.389 [DataOverHttps](INFO): SBD MOMSN=4555387
2016-11-11T12:04:11.443Z,1478865851.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:11.459Z,1478865851.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:11.612Z,1478865851.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:12.408Z,1478865852.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:12.755Z,1478865852.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:12.774Z,1478865852.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:12.784Z,1478865852.784 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T12:04:12.784Z,1478865852.784 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T12:04:12.784Z,1478865852.784 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T12:04:12.868Z,1478865852.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:12.888Z,1478865852.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:13.205Z,1478865853.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:13.616Z,1478865853.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:14.412Z,1478865854.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:15.209Z,1478865855.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:15.620Z,1478865855.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:16.416Z,1478865856.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:16.417Z,1478865856.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:16.433Z,1478865856.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:16.533Z,1478865856.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:16.564Z,1478865856.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:16.930Z,1478865856.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:16.946Z,1478865856.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:17.212Z,1478865857.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:17.357Z,1478865857.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:17.382Z,1478865857.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:17.704Z,1478865857.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:17.716Z,1478865857.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:17.740Z,1478865857.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:18.121Z,1478865858.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:18.152Z,1478865858.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:18.500Z,1478865858.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:18.515Z,1478865858.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:18.552Z,1478865858.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:18.913Z,1478865858.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:18.945Z,1478865858.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:19.296Z,1478865859.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:19.318Z,1478865859.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:19.346Z,1478865859.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:19.714Z,1478865859.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:19.753Z,1478865859.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:20.048Z,1478865860.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:20.113Z,1478865860.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:20.145Z,1478865860.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:20.513Z,1478865860.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:20.548Z,1478865860.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:20.844Z,1478865860.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:20.922Z,1478865860.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:20.950Z,1478865860.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:21.332Z,1478865861.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:21.385Z,1478865861.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:21.641Z,1478865861.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:21.724Z,1478865861.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:21.747Z,1478865861.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:22.052Z,1478865862.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:22.136Z,1478865862.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:22.161Z,1478865862.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:22.524Z,1478865862.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:22.581Z,1478865862.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:22.848Z,1478865862.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:22.918Z,1478865862.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:22.948Z,1478865862.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:23.329Z,1478865863.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:23.353Z,1478865863.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:23.580Z,1478865863.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:23.714Z,1478865863.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:23.771Z,1478865863.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:24.122Z,1478865864.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:24.143Z,1478865864.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:24.376Z,1478865864.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:24.526Z,1478865864.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:24.580Z,1478865864.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:24.914Z,1478865864.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:24.977Z,1478865864.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:25.173Z,1478865865.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:25.313Z,1478865865.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:25.353Z,1478865865.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:25.584Z,1478865865.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:25.714Z,1478865865.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:25.750Z,1478865865.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:26.113Z,1478865866.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:26.140Z,1478865866.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:26.380Z,1478865866.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:26.535Z,1478865866.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:26.550Z,1478865866.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:26.943Z,1478865866.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:26.958Z,1478865866.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:27.177Z,1478865867.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:27.335Z,1478865867.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:27.350Z,1478865867.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:27.588Z,1478865867.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:27.726Z,1478865867.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:27.746Z,1478865867.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:28.130Z,1478865868.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:28.146Z,1478865868.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:28.384Z,1478865868.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:28.513Z,1478865868.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:28.553Z,1478865868.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:28.913Z,1478865868.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:28.947Z,1478865868.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:29.181Z,1478865869.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:29.329Z,1478865869.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:29.344Z,1478865869.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:29.592Z,1478865869.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:29.714Z,1478865869.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:29.745Z,1478865869.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:30.097Z,1478865870.097 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T12:04:30.113Z,1478865870.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:30.154Z,1478865870.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:30.388Z,1478865870.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:30.514Z,1478865870.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:30.549Z,1478865870.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:30.914Z,1478865870.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:30.953Z,1478865870.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:31.186Z,1478865871.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:31.320Z,1478865871.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:31.365Z,1478865871.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:31.676Z,1478865871.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:31.727Z,1478865871.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:31.759Z,1478865871.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:32.117Z,1478865872.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:32.137Z,1478865872.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:32.472Z,1478865872.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:32.528Z,1478865872.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:32.543Z,1478865872.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:32.921Z,1478865872.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:32.942Z,1478865872.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:33.268Z,1478865873.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:33.324Z,1478865873.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:33.339Z,1478865873.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:33.721Z,1478865873.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:33.736Z,1478865873.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:34.028Z,1478865874.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:34.170Z,1478865874.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:34.195Z,1478865874.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:34.522Z,1478865874.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:34.537Z,1478865874.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:34.824Z,1478865874.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:34.917Z,1478865874.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:34.941Z,1478865874.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:35.314Z,1478865875.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:35.377Z,1478865875.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:35.621Z,1478865875.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:35.705Z,1478865875.705 [NAL9602](INFO): Powering down
2016-11-11T12:04:35.740Z,1478865875.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:35.772Z,1478865875.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:36.036Z,1478865876.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:36.122Z,1478865876.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:36.146Z,1478865876.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:36.513Z,1478865876.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:36.533Z,1478865876.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:36.832Z,1478865876.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:36.918Z,1478865876.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:36.961Z,1478865876.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:37.320Z,1478865877.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:37.336Z,1478865877.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:37.556Z,1478865877.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:37.729Z,1478865877.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:37.777Z,1478865877.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:38.113Z,1478865878.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:38.145Z,1478865878.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:38.352Z,1478865878.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:38.513Z,1478865878.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:38.558Z,1478865878.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:38.913Z,1478865878.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:38.961Z,1478865878.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:39.149Z,1478865879.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:39.313Z,1478865879.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:39.359Z,1478865879.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:39.560Z,1478865879.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:39.718Z,1478865879.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:39.737Z,1478865879.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:40.116Z,1478865880.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:40.137Z,1478865880.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:40.356Z,1478865880.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:40.520Z,1478865880.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:40.536Z,1478865880.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:40.919Z,1478865880.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:40.941Z,1478865880.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:41.153Z,1478865881.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:41.327Z,1478865881.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:41.343Z,1478865881.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:41.572Z,1478865881.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:41.720Z,1478865881.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:41.736Z,1478865881.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:42.113Z,1478865882.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:42.139Z,1478865882.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:42.368Z,1478865882.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:42.513Z,1478865882.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:42.547Z,1478865882.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:42.913Z,1478865882.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:42.991Z,1478865882.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:43.164Z,1478865883.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:43.317Z,1478865883.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:43.332Z,1478865883.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:43.576Z,1478865883.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:43.713Z,1478865883.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:43.728Z,1478865883.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:44.113Z,1478865884.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:44.128Z,1478865884.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:44.372Z,1478865884.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:44.520Z,1478865884.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:44.537Z,1478865884.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:44.919Z,1478865884.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:44.946Z,1478865884.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:45.168Z,1478865885.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:45.320Z,1478865885.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:45.336Z,1478865885.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:45.648Z,1478865885.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:45.727Z,1478865885.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:45.756Z,1478865885.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:46.121Z,1478865886.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:46.137Z,1478865886.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:46.444Z,1478865886.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:46.516Z,1478865886.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:46.539Z,1478865886.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:46.913Z,1478865886.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:46.946Z,1478865886.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:47.240Z,1478865887.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:47.313Z,1478865887.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:47.345Z,1478865887.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:47.713Z,1478865887.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:47.738Z,1478865887.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:48.008Z,1478865888.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:48.113Z,1478865888.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:48.147Z,1478865888.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:48.513Z,1478865888.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:48.549Z,1478865888.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:48.804Z,1478865888.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:48.913Z,1478865888.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:48.950Z,1478865888.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:49.313Z,1478865889.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:49.369Z,1478865889.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:49.601Z,1478865889.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:49.713Z,1478865889.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:49.753Z,1478865889.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:50.012Z,1478865890.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:50.113Z,1478865890.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:50.150Z,1478865890.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:50.519Z,1478865890.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:50.559Z,1478865890.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:50.808Z,1478865890.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:50.913Z,1478865890.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:50.928Z,1478865890.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:51.313Z,1478865891.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:51.381Z,1478865891.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:51.536Z,1478865891.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:51.724Z,1478865891.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:51.745Z,1478865891.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:52.113Z,1478865892.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:52.154Z,1478865892.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:52.332Z,1478865892.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:52.517Z,1478865892.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:52.537Z,1478865892.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:52.913Z,1478865892.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:52.962Z,1478865892.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:53.134Z,1478865893.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:53.321Z,1478865893.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:53.370Z,1478865893.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:53.560Z,1478865893.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:53.713Z,1478865893.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:53.753Z,1478865893.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:54.112Z,1478865894.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:54.127Z,1478865894.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:54.356Z,1478865894.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:54.513Z,1478865894.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:54.545Z,1478865894.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:54.920Z,1478865894.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:54.936Z,1478865894.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:55.152Z,1478865895.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:55.325Z,1478865895.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:55.349Z,1478865895.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:55.560Z,1478865895.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:55.721Z,1478865895.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:55.736Z,1478865895.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:56.146Z,1478865896.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:56.162Z,1478865896.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:56.356Z,1478865896.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:56.513Z,1478865896.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:56.542Z,1478865896.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:56.919Z,1478865896.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:56.934Z,1478865896.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:57.152Z,1478865897.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:57.325Z,1478865897.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:57.340Z,1478865897.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:57.564Z,1478865897.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:57.724Z,1478865897.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:57.745Z,1478865897.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:58.120Z,1478865898.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:58.135Z,1478865898.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:58.360Z,1478865898.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:58.520Z,1478865898.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:58.548Z,1478865898.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:58.913Z,1478865898.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:58.943Z,1478865898.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:59.156Z,1478865899.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:59.328Z,1478865899.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:59.344Z,1478865899.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:04:59.640Z,1478865899.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:59.712Z,1478865899.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:04:59.738Z,1478865899.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:00.128Z,1478865900.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:00.143Z,1478865900.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:00.436Z,1478865900.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:00.513Z,1478865900.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:00.547Z,1478865900.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:00.913Z,1478865900.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:00.945Z,1478865900.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:01.232Z,1478865901.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:01.313Z,1478865901.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:01.348Z,1478865901.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:01.713Z,1478865901.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:01.745Z,1478865901.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:01.984Z,1478865901.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:02.113Z,1478865902.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:02.149Z,1478865902.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:02.516Z,1478865902.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:02.531Z,1478865902.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:02.780Z,1478865902.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:02.921Z,1478865902.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:02.937Z,1478865902.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:03.317Z,1478865903.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:03.336Z,1478865903.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:03.577Z,1478865903.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:03.720Z,1478865903.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:03.793Z,1478865903.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:03.988Z,1478865903.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:04.124Z,1478865904.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:04.145Z,1478865904.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:04.516Z,1478865904.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:04.539Z,1478865904.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:04.784Z,1478865904.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:04.921Z,1478865904.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:04.954Z,1478865904.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:05.313Z,1478865905.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:05.343Z,1478865905.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:05.512Z,1478865905.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:05.713Z,1478865905.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:05.745Z,1478865905.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:06.113Z,1478865906.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:06.179Z,1478865906.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:06.308Z,1478865906.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:06.513Z,1478865906.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:06.538Z,1478865906.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:06.921Z,1478865906.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:06.986Z,1478865906.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:07.110Z,1478865907.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:07.313Z,1478865907.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:07.361Z,1478865907.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:07.536Z,1478865907.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:07.713Z,1478865907.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:07.748Z,1478865907.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:08.113Z,1478865908.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:08.149Z,1478865908.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:08.332Z,1478865908.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:08.513Z,1478865908.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:08.548Z,1478865908.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:08.913Z,1478865908.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:08.949Z,1478865908.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:09.131Z,1478865909.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:09.321Z,1478865909.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:09.346Z,1478865909.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:09.542Z,1478865909.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:09.713Z,1478865909.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:09.749Z,1478865909.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:10.113Z,1478865910.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:10.148Z,1478865910.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:10.336Z,1478865910.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:10.513Z,1478865910.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:10.533Z,1478865910.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:10.917Z,1478865910.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:10.937Z,1478865910.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:11.132Z,1478865911.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:11.314Z,1478865911.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:11.330Z,1478865911.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:11.561Z,1478865911.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:11.720Z,1478865911.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:11.735Z,1478865911.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:12.121Z,1478865912.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:12.136Z,1478865912.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:12.356Z,1478865912.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:12.520Z,1478865912.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:12.535Z,1478865912.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:12.921Z,1478865912.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:12.937Z,1478865912.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:13.152Z,1478865913.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:13.329Z,1478865913.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:13.345Z,1478865913.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:13.616Z,1478865913.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:14.413Z,1478865914.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:15.208Z,1478865915.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:15.984Z,1478865915.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:16.780Z,1478865916.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:16.845Z,1478865916.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:16.862Z,1478865916.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:16.967Z,1478865916.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:17.006Z,1478865917.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:17.347Z,1478865917.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:17.362Z,1478865917.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:17.577Z,1478865917.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:17.748Z,1478865917.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:17.765Z,1478865917.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:17.988Z,1478865917.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:18.153Z,1478865918.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:18.168Z,1478865918.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:18.549Z,1478865918.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:18.583Z,1478865918.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:18.784Z,1478865918.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:18.956Z,1478865918.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:18.972Z,1478865918.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:19.341Z,1478865919.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:19.397Z,1478865919.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:19.492Z,1478865919.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:19.741Z,1478865919.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:19.777Z,1478865919.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:20.141Z,1478865920.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:20.194Z,1478865920.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:20.288Z,1478865920.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:20.541Z,1478865920.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:20.568Z,1478865920.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:20.941Z,1478865920.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:20.993Z,1478865920.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:21.084Z,1478865921.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:21.352Z,1478865921.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:21.391Z,1478865921.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:21.504Z,1478865921.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:21.748Z,1478865921.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:21.764Z,1478865921.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:22.148Z,1478865922.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:22.169Z,1478865922.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:22.300Z,1478865922.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:22.548Z,1478865922.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:22.562Z,1478865922.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:22.944Z,1478865922.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:22.978Z,1478865922.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:23.097Z,1478865923.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:23.349Z,1478865923.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:23.369Z,1478865923.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:23.508Z,1478865923.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:23.743Z,1478865923.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:23.777Z,1478865923.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:24.141Z,1478865924.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:24.174Z,1478865924.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:24.304Z,1478865924.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:24.541Z,1478865924.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:24.582Z,1478865924.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:24.941Z,1478865924.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:24.973Z,1478865924.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:25.101Z,1478865925.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:25.349Z,1478865925.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:25.381Z,1478865925.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:25.516Z,1478865925.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:25.741Z,1478865925.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:25.784Z,1478865925.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:26.141Z,1478865926.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:26.156Z,1478865926.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:26.314Z,1478865926.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:26.541Z,1478865926.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:26.561Z,1478865926.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:26.941Z,1478865926.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:26.961Z,1478865926.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:27.108Z,1478865927.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:27.352Z,1478865927.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:27.367Z,1478865927.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:27.588Z,1478865927.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:27.749Z,1478865927.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:27.765Z,1478865927.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:28.147Z,1478865928.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:28.162Z,1478865928.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:28.384Z,1478865928.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:28.547Z,1478865928.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:28.562Z,1478865928.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:28.948Z,1478865928.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:28.964Z,1478865928.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:29.180Z,1478865929.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:29.349Z,1478865929.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:29.381Z,1478865929.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:29.741Z,1478865929.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:29.777Z,1478865929.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:29.942Z,1478865929.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:30.141Z,1478865930.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:30.177Z,1478865930.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:30.541Z,1478865930.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:30.581Z,1478865930.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:30.736Z,1478865930.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:30.941Z,1478865930.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:30.957Z,1478865930.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:31.352Z,1478865931.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:31.368Z,1478865931.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:31.533Z,1478865931.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:31.748Z,1478865931.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:31.763Z,1478865931.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:31.960Z,1478865931.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:32.146Z,1478865932.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:32.169Z,1478865932.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:32.549Z,1478865932.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:32.589Z,1478865932.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:32.756Z,1478865932.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:32.945Z,1478865932.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:32.977Z,1478865932.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:33.341Z,1478865933.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:33.405Z,1478865933.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:33.480Z,1478865933.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:33.742Z,1478865933.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:33.765Z,1478865933.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:34.148Z,1478865934.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:34.196Z,1478865934.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:34.277Z,1478865934.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:34.544Z,1478865934.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:34.565Z,1478865934.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:34.949Z,1478865934.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:35.003Z,1478865935.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:35.073Z,1478865935.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:35.356Z,1478865935.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:35.407Z,1478865935.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:35.484Z,1478865935.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:35.748Z,1478865935.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:35.763Z,1478865935.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:36.152Z,1478865936.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:36.168Z,1478865936.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:36.280Z,1478865936.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:36.541Z,1478865936.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:36.573Z,1478865936.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:36.941Z,1478865936.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:36.975Z,1478865936.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:37.076Z,1478865937.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:37.353Z,1478865937.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:37.380Z,1478865937.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:37.488Z,1478865937.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:37.747Z,1478865937.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:37.761Z,1478865937.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:38.144Z,1478865938.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:38.159Z,1478865938.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:38.284Z,1478865938.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:38.549Z,1478865938.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:38.564Z,1478865938.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:38.944Z,1478865938.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:38.973Z,1478865938.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:39.081Z,1478865939.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:39.341Z,1478865939.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:39.361Z,1478865939.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:39.492Z,1478865939.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:39.740Z,1478865939.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:39.761Z,1478865939.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:40.144Z,1478865940.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:40.165Z,1478865940.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:40.288Z,1478865940.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:40.548Z,1478865940.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:40.563Z,1478865940.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:40.951Z,1478865940.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:40.970Z,1478865940.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:41.084Z,1478865941.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:41.347Z,1478865941.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:41.366Z,1478865941.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:41.564Z,1478865941.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:41.748Z,1478865941.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:41.763Z,1478865941.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:42.153Z,1478865942.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:42.168Z,1478865942.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:42.360Z,1478865942.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:42.544Z,1478865942.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:42.575Z,1478865942.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:42.948Z,1478865942.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:42.969Z,1478865942.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:43.156Z,1478865943.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:43.352Z,1478865943.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:43.368Z,1478865943.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:43.753Z,1478865943.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:43.774Z,1478865943.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:43.920Z,1478865943.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:44.141Z,1478865944.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:44.175Z,1478865944.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:44.541Z,1478865944.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:44.573Z,1478865944.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:44.716Z,1478865944.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:44.945Z,1478865944.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:44.981Z,1478865944.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:45.348Z,1478865945.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:45.420Z,1478865945.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:45.512Z,1478865945.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:45.741Z,1478865945.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:45.761Z,1478865945.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:45.924Z,1478865945.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:46.146Z,1478865946.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:46.170Z,1478865946.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:46.554Z,1478865946.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:46.613Z,1478865946.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:46.720Z,1478865946.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:46.953Z,1478865946.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:46.968Z,1478865946.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:47.341Z,1478865947.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:47.402Z,1478865947.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:47.449Z,1478865947.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:47.741Z,1478865947.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:47.784Z,1478865947.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:48.145Z,1478865948.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:48.198Z,1478865948.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:48.244Z,1478865948.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:48.546Z,1478865948.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:48.561Z,1478865948.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:48.941Z,1478865948.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:48.994Z,1478865948.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:49.041Z,1478865949.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:49.353Z,1478865949.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:49.398Z,1478865949.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:49.464Z,1478865949.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:49.749Z,1478865949.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:49.769Z,1478865949.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:50.150Z,1478865950.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:50.166Z,1478865950.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:50.260Z,1478865950.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:50.553Z,1478865950.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:50.573Z,1478865950.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:50.944Z,1478865950.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:50.969Z,1478865950.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:51.057Z,1478865951.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:51.341Z,1478865951.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:51.373Z,1478865951.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:51.468Z,1478865951.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:51.741Z,1478865951.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:51.773Z,1478865951.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:52.141Z,1478865952.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:52.178Z,1478865952.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:52.264Z,1478865952.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:52.541Z,1478865952.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:52.572Z,1478865952.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:52.941Z,1478865952.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:52.978Z,1478865952.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:53.060Z,1478865953.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:53.356Z,1478865953.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:53.372Z,1478865953.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:53.472Z,1478865953.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:53.741Z,1478865953.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:53.775Z,1478865953.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:54.141Z,1478865954.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:54.175Z,1478865954.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:54.268Z,1478865954.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:54.541Z,1478865954.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:54.574Z,1478865954.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:54.941Z,1478865954.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:54.975Z,1478865954.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:55.064Z,1478865955.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:55.341Z,1478865955.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:55.366Z,1478865955.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:55.560Z,1478865955.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:55.741Z,1478865955.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:55.774Z,1478865955.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:56.141Z,1478865956.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:56.191Z,1478865956.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:56.358Z,1478865956.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:56.541Z,1478865956.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:56.568Z,1478865956.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:56.941Z,1478865956.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:56.984Z,1478865956.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:57.152Z,1478865957.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:57.345Z,1478865957.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:57.380Z,1478865957.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:57.400Z,1478865957.400 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T12:05:57.748Z,1478865957.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:57.763Z,1478865957.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:57.900Z,1478865957.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:58.152Z,1478865958.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:58.166Z,1478865958.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:58.548Z,1478865958.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:58.569Z,1478865958.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:58.696Z,1478865958.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:58.950Z,1478865958.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:58.973Z,1478865958.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:59.341Z,1478865959.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:59.373Z,1478865959.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:59.493Z,1478865959.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:59.741Z,1478865959.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:05:59.773Z,1478865959.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:05:59.904Z,1478865959.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:00.141Z,1478865960.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:00.167Z,1478865960.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:00.541Z,1478865960.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:00.573Z,1478865960.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:00.700Z,1478865960.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:00.945Z,1478865960.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:00.980Z,1478865960.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:01.341Z,1478865961.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:01.394Z,1478865961.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:01.448Z,1478865961.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:01.745Z,1478865961.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:01.765Z,1478865961.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:02.148Z,1478865962.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:02.163Z,1478865962.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:02.244Z,1478865962.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:02.547Z,1478865962.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:02.563Z,1478865962.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:02.944Z,1478865962.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:02.973Z,1478865962.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:03.041Z,1478865963.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:03.341Z,1478865963.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:03.384Z,1478865963.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:03.452Z,1478865963.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:03.741Z,1478865963.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:03.757Z,1478865963.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:04.141Z,1478865964.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:04.161Z,1478865964.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:04.248Z,1478865964.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:04.541Z,1478865964.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:04.549Z,1478865964.549 [BPC1](ERROR): Failed to receive battery data
2016-11-11T12:06:04.549Z,1478865964.549 [BPC1] Communications Fault, FailCount= 1
2016-11-11T12:06:04.549Z,1478865964.549 [BPC1](ERROR): Communications Fault
2016-11-11T12:06:04.557Z,1478865964.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:04.620Z,1478865964.620 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T12:06:04.945Z,1478865964.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:04.960Z,1478865964.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:05.045Z,1478865965.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:05.353Z,1478865965.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:05.368Z,1478865965.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:05.456Z,1478865965.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:05.751Z,1478865965.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:05.766Z,1478865965.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:05.809Z,1478865965.809 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:06:05.809Z,1478865965.809 [BPC1] No Fault, FailCount= 1
2016-11-11T12:06:06.148Z,1478865966.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:06.225Z,1478865966.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:06.252Z,1478865966.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:06.548Z,1478865966.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:06.603Z,1478865966.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:06.948Z,1478865966.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:06.963Z,1478865966.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:07.048Z,1478865967.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:07.341Z,1478865967.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:07.373Z,1478865967.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:07.456Z,1478865967.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:07.745Z,1478865967.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:07.770Z,1478865967.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:08.141Z,1478865968.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:08.175Z,1478865968.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:08.252Z,1478865968.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:08.541Z,1478865968.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:08.573Z,1478865968.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:08.957Z,1478865968.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:08.977Z,1478865968.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:09.048Z,1478865969.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:09.341Z,1478865969.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:09.374Z,1478865969.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:09.536Z,1478865969.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:09.741Z,1478865969.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:09.773Z,1478865969.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:10.145Z,1478865970.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:10.170Z,1478865970.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:10.332Z,1478865970.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:10.541Z,1478865970.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:10.574Z,1478865970.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:10.941Z,1478865970.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:10.969Z,1478865970.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:11.128Z,1478865971.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:11.345Z,1478865971.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:11.377Z,1478865971.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:11.741Z,1478865971.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:11.756Z,1478865971.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:11.888Z,1478865971.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:12.141Z,1478865972.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:12.156Z,1478865972.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:12.549Z,1478865972.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:12.564Z,1478865972.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:12.684Z,1478865972.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:12.949Z,1478865972.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:12.964Z,1478865972.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:13.348Z,1478865973.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:13.363Z,1478865973.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:13.481Z,1478865973.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:13.896Z,1478865973.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:14.692Z,1478865974.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:15.416Z,1478865975.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:16.212Z,1478865976.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:16.908Z,1478865976.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:16.924Z,1478865976.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:17.009Z,1478865977.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:17.090Z,1478865977.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:17.121Z,1478865977.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:17.420Z,1478865977.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:17.482Z,1478865977.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:17.510Z,1478865977.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:17.876Z,1478865977.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:17.891Z,1478865977.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:18.216Z,1478865978.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:18.280Z,1478865978.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:18.296Z,1478865978.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:18.680Z,1478865978.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:18.769Z,1478865978.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:19.013Z,1478865979.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:19.082Z,1478865979.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:19.110Z,1478865979.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:19.424Z,1478865979.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:19.479Z,1478865979.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:19.534Z,1478865979.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:19.877Z,1478865979.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:19.897Z,1478865979.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:20.220Z,1478865980.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:20.269Z,1478865980.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:20.318Z,1478865980.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:20.669Z,1478865980.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:20.717Z,1478865980.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:21.018Z,1478865981.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:21.077Z,1478865981.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:21.113Z,1478865981.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:21.428Z,1478865981.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:21.478Z,1478865981.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:21.493Z,1478865981.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:21.872Z,1478865981.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:21.888Z,1478865981.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:22.224Z,1478865982.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:22.278Z,1478865982.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:22.308Z,1478865982.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:22.676Z,1478865982.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:22.691Z,1478865982.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:23.020Z,1478865983.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:23.108Z,1478865983.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:23.157Z,1478865983.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:23.477Z,1478865983.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:23.504Z,1478865983.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:23.532Z,1478865983.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:23.874Z,1478865983.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:23.889Z,1478865983.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:24.275Z,1478865984.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:24.290Z,1478865984.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:24.328Z,1478865984.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:24.677Z,1478865984.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:24.692Z,1478865984.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:25.075Z,1478865985.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:25.097Z,1478865985.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:25.124Z,1478865985.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:25.545Z,1478865985.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:25.565Z,1478865985.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:25.870Z,1478865985.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:25.874Z,1478865985.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:25.913Z,1478865985.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:26.269Z,1478865986.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:26.305Z,1478865986.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:26.666Z,1478865986.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:26.670Z,1478865986.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:26.693Z,1478865986.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:27.073Z,1478865987.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:27.109Z,1478865987.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:27.461Z,1478865987.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:27.496Z,1478865987.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:27.529Z,1478865987.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:27.873Z,1478865987.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:27.874Z,1478865987.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:27.913Z,1478865987.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:28.273Z,1478865988.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:28.288Z,1478865988.288 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:28.288Z,1478865988.288 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 126
2016-11-11T12:06:28.289Z,1478865988.289 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:06:28.295Z,1478865988.295 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:28.295Z,1478865988.295 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 126
2016-11-11T12:06:28.295Z,1478865988.295 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:06:28.297Z,1478865988.297 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:28.298Z,1478865988.297 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 126
2016-11-11T12:06:28.298Z,1478865988.298 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:06:28.332Z,1478865988.332 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:06:28.332Z,1478865988.332 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:06:28.333Z,1478865988.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:06:28.668Z,1478865988.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:28.681Z,1478865988.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:28.755Z,1478865988.755 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:06:28.756Z,1478865988.756 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 126
2016-11-11T12:06:28.756Z,1478865988.756 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:06:28.756Z,1478865988.756 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 126
2016-11-11T12:06:28.757Z,1478865988.757 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:06:28.757Z,1478865988.757 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 126
2016-11-11T12:06:29.076Z,1478865989.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:29.090Z,1478865989.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:06:29.091Z,1478865989.091 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:06:29.091Z,1478865989.092 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:06:29.096Z,1478865989.096 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:06:29.097Z,1478865989.097 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:06:29.097Z,1478865989.097 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:06:29.097Z,1478865989.098 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:06:29.098Z,1478865989.098 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:06:29.098Z,1478865989.098 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:06:29.388Z,1478865989.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:29.483Z,1478865989.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:29.500Z,1478865989.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:29.879Z,1478865989.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:29.905Z,1478865989.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:30.184Z,1478865990.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:30.269Z,1478865990.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:30.301Z,1478865990.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:30.684Z,1478865990.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:30.700Z,1478865990.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:30.982Z,1478865990.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:31.084Z,1478865991.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:31.100Z,1478865991.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:31.396Z,1478865991.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:31.469Z,1478865991.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:31.501Z,1478865991.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:31.873Z,1478865991.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:31.905Z,1478865991.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:32.192Z,1478865992.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:32.269Z,1478865992.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:32.289Z,1478865992.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:32.678Z,1478865992.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:32.729Z,1478865992.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:32.989Z,1478865992.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:33.096Z,1478865993.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:33.161Z,1478865993.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:33.400Z,1478865993.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:33.469Z,1478865993.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:33.508Z,1478865993.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:33.869Z,1478865993.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:33.913Z,1478865993.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:34.196Z,1478865994.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:34.269Z,1478865994.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:34.305Z,1478865994.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:34.669Z,1478865994.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:34.717Z,1478865994.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:34.993Z,1478865994.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:35.069Z,1478865995.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:35.111Z,1478865995.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:35.404Z,1478865995.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:35.473Z,1478865995.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:35.513Z,1478865995.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:35.876Z,1478865995.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:35.897Z,1478865995.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:36.200Z,1478865996.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:36.277Z,1478865996.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:36.297Z,1478865996.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:36.676Z,1478865996.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:36.699Z,1478865996.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:36.996Z,1478865996.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:37.093Z,1478865997.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:37.175Z,1478865997.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:37.473Z,1478865997.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:37.488Z,1478865997.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:37.528Z,1478865997.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:37.877Z,1478865997.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:37.897Z,1478865997.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:38.280Z,1478865998.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:38.296Z,1478865998.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:38.324Z,1478865998.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:38.676Z,1478865998.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:38.692Z,1478865998.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:39.069Z,1478865999.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:39.109Z,1478865999.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:39.120Z,1478865999.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:39.489Z,1478865999.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:39.530Z,1478865999.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:39.836Z,1478865999.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:39.869Z,1478865999.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:39.901Z,1478865999.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:40.269Z,1478866000.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:40.301Z,1478866000.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:40.632Z,1478866000.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:40.669Z,1478866000.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:40.706Z,1478866000.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:41.069Z,1478866001.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:41.108Z,1478866001.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:41.429Z,1478866001.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:41.477Z,1478866001.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:41.518Z,1478866001.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:41.844Z,1478866001.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:41.874Z,1478866001.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:41.900Z,1478866001.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:42.275Z,1478866002.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:42.290Z,1478866002.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:42.640Z,1478866002.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:42.678Z,1478866002.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:42.693Z,1478866002.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:43.076Z,1478866003.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:43.097Z,1478866003.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:43.380Z,1478866003.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:43.472Z,1478866003.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:43.496Z,1478866003.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:43.869Z,1478866003.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:43.903Z,1478866003.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:44.176Z,1478866004.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:44.280Z,1478866004.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:44.295Z,1478866004.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:44.669Z,1478866004.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:44.701Z,1478866004.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:44.973Z,1478866004.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:45.085Z,1478866005.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:45.101Z,1478866005.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:45.388Z,1478866005.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:45.469Z,1478866005.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:45.501Z,1478866005.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:45.869Z,1478866005.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:45.900Z,1478866005.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:46.185Z,1478866006.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:46.273Z,1478866006.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:46.308Z,1478866006.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:46.669Z,1478866006.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:46.705Z,1478866006.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:46.981Z,1478866006.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:47.069Z,1478866007.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:47.121Z,1478866007.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:47.396Z,1478866007.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:47.475Z,1478866007.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:47.526Z,1478866007.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:47.876Z,1478866007.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:47.897Z,1478866007.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:48.192Z,1478866008.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:48.269Z,1478866008.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:48.381Z,1478866008.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:48.669Z,1478866008.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:48.702Z,1478866008.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:48.988Z,1478866008.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:49.069Z,1478866009.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:49.117Z,1478866009.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:49.396Z,1478866009.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:49.469Z,1478866009.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:49.517Z,1478866009.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:49.869Z,1478866009.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:49.912Z,1478866009.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:50.192Z,1478866010.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:50.269Z,1478866010.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:50.312Z,1478866010.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:50.669Z,1478866010.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:50.684Z,1478866010.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:50.988Z,1478866010.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:51.088Z,1478866011.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:51.154Z,1478866011.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:51.476Z,1478866011.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:51.491Z,1478866011.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:51.508Z,1478866011.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:51.876Z,1478866011.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:51.892Z,1478866011.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:52.275Z,1478866012.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:52.297Z,1478866012.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:52.304Z,1478866012.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:52.680Z,1478866012.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:52.696Z,1478866012.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:53.069Z,1478866013.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:53.094Z,1478866013.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:53.100Z,1478866013.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:53.470Z,1478866013.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:53.505Z,1478866013.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:53.824Z,1478866013.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:53.877Z,1478866013.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:53.902Z,1478866013.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:54.269Z,1478866014.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:54.305Z,1478866014.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:54.620Z,1478866014.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:54.669Z,1478866014.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:54.705Z,1478866014.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:55.069Z,1478866015.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:55.104Z,1478866015.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:55.417Z,1478866015.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:55.471Z,1478866015.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:55.517Z,1478866015.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:55.828Z,1478866015.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:55.869Z,1478866015.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:55.912Z,1478866015.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:56.269Z,1478866016.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:56.284Z,1478866016.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:56.624Z,1478866016.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:56.674Z,1478866016.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:56.690Z,1478866016.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:57.074Z,1478866017.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:57.089Z,1478866017.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:57.348Z,1478866017.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:57.473Z,1478866017.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:57.493Z,1478866017.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:57.872Z,1478866017.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:57.896Z,1478866017.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:58.144Z,1478866018.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:58.279Z,1478866018.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:58.294Z,1478866018.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:58.680Z,1478866018.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:58.695Z,1478866018.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:58.941Z,1478866018.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:59.084Z,1478866019.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:59.100Z,1478866019.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:59.388Z,1478866019.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:59.480Z,1478866019.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:59.495Z,1478866019.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:06:59.873Z,1478866019.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:06:59.898Z,1478866019.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:00.184Z,1478866020.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:00.269Z,1478866020.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:00.301Z,1478866020.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:00.669Z,1478866020.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:00.701Z,1478866020.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:00.981Z,1478866020.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:01.069Z,1478866021.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:01.101Z,1478866021.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:01.392Z,1478866021.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:01.477Z,1478866021.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:01.558Z,1478866021.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:01.869Z,1478866021.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:01.912Z,1478866021.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:02.190Z,1478866022.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:02.269Z,1478866022.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:02.306Z,1478866022.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:02.669Z,1478866022.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:02.721Z,1478866022.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:02.984Z,1478866022.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:03.069Z,1478866023.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:03.089Z,1478866023.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:03.392Z,1478866023.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:03.474Z,1478866023.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:03.521Z,1478866023.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:03.872Z,1478866023.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:03.921Z,1478866023.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:04.188Z,1478866024.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:04.272Z,1478866024.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:04.293Z,1478866024.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:04.673Z,1478866024.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:04.688Z,1478866024.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:04.984Z,1478866024.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:05.073Z,1478866025.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:05.120Z,1478866025.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:05.469Z,1478866025.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:05.496Z,1478866025.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:05.509Z,1478866025.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:05.873Z,1478866025.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:05.905Z,1478866025.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:06.269Z,1478866026.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:06.296Z,1478866026.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:06.305Z,1478866026.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:06.669Z,1478866026.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:06.689Z,1478866026.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:07.069Z,1478866027.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:07.089Z,1478866027.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:07.100Z,1478866027.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:07.469Z,1478866027.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:07.484Z,1478866027.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:07.792Z,1478866027.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:07.877Z,1478866027.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:07.892Z,1478866027.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:08.277Z,1478866028.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:08.292Z,1478866028.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:08.588Z,1478866028.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:08.676Z,1478866028.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:08.691Z,1478866028.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:09.076Z,1478866029.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:09.090Z,1478866029.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:09.385Z,1478866029.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:09.476Z,1478866029.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:09.497Z,1478866029.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:09.796Z,1478866029.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:09.869Z,1478866029.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:09.902Z,1478866029.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:10.269Z,1478866030.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:10.302Z,1478866030.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:10.592Z,1478866030.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:10.677Z,1478866030.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:10.709Z,1478866030.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:11.069Z,1478866031.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:11.101Z,1478866031.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:11.324Z,1478866031.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:11.473Z,1478866031.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:11.505Z,1478866031.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:11.869Z,1478866031.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:11.905Z,1478866031.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:12.120Z,1478866032.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:12.269Z,1478866032.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:12.289Z,1478866032.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:12.676Z,1478866032.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:12.691Z,1478866032.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:12.917Z,1478866032.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:13.080Z,1478866033.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:13.101Z,1478866033.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:13.328Z,1478866033.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:13.476Z,1478866033.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:13.492Z,1478866033.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:14.124Z,1478866034.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:14.921Z,1478866034.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:15.332Z,1478866035.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:16.128Z,1478866036.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:16.845Z,1478866036.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:16.924Z,1478866036.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:16.974Z,1478866036.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:17.068Z,1478866037.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:17.090Z,1478866037.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:17.336Z,1478866037.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:17.457Z,1478866037.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:17.477Z,1478866037.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:17.856Z,1478866037.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:17.872Z,1478866037.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:18.132Z,1478866038.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:18.256Z,1478866038.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:18.272Z,1478866038.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:18.656Z,1478866038.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:18.672Z,1478866038.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:18.928Z,1478866038.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:19.060Z,1478866039.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:19.073Z,1478866039.073 [BPC1](ERROR): Failed to receive battery data
2016-11-11T12:07:19.074Z,1478866039.074 [BPC1] Communications Fault, FailCount= 1
2016-11-11T12:07:19.074Z,1478866039.074 [BPC1](ERROR): Communications Fault
2016-11-11T12:07:19.090Z,1478866039.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:19.144Z,1478866039.144 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T12:07:19.420Z,1478866039.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:19.449Z,1478866039.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:19.482Z,1478866039.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:19.849Z,1478866039.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:19.886Z,1478866039.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:20.216Z,1478866040.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:20.249Z,1478866040.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:20.285Z,1478866040.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:20.305Z,1478866040.305 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:07:20.305Z,1478866040.305 [BPC1] No Fault, FailCount= 1
2016-11-11T12:07:20.649Z,1478866040.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:20.733Z,1478866040.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:21.012Z,1478866041.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:21.049Z,1478866041.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:21.085Z,1478866041.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:21.449Z,1478866041.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:21.503Z,1478866041.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:21.768Z,1478866041.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:21.849Z,1478866041.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:21.885Z,1478866041.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:22.249Z,1478866042.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:22.269Z,1478866042.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:22.564Z,1478866042.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:22.653Z,1478866042.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:22.673Z,1478866042.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:23.056Z,1478866043.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:23.072Z,1478866043.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:23.361Z,1478866043.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:23.456Z,1478866043.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:23.471Z,1478866043.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:23.772Z,1478866043.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:23.852Z,1478866043.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:23.880Z,1478866043.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:24.249Z,1478866044.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:24.281Z,1478866044.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:24.568Z,1478866044.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:24.649Z,1478866044.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:24.683Z,1478866044.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:25.054Z,1478866045.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:25.069Z,1478866045.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:25.300Z,1478866045.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:25.457Z,1478866045.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:25.472Z,1478866045.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:25.855Z,1478866045.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:25.877Z,1478866045.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:26.096Z,1478866046.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:26.255Z,1478866046.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:26.270Z,1478866046.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:26.656Z,1478866046.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:26.671Z,1478866046.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:26.893Z,1478866046.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:27.049Z,1478866047.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:27.075Z,1478866047.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:27.308Z,1478866047.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:27.449Z,1478866047.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:27.483Z,1478866047.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:27.849Z,1478866047.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:27.881Z,1478866047.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:28.105Z,1478866048.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:28.249Z,1478866048.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:28.281Z,1478866048.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:28.653Z,1478866048.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:28.678Z,1478866048.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:28.901Z,1478866048.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:29.058Z,1478866049.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:29.083Z,1478866049.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:29.314Z,1478866049.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:29.449Z,1478866049.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:29.485Z,1478866049.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:29.849Z,1478866049.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:29.886Z,1478866049.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:30.108Z,1478866050.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:30.253Z,1478866050.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:30.285Z,1478866050.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:30.649Z,1478866050.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:30.692Z,1478866050.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:30.914Z,1478866050.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:31.057Z,1478866051.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:31.089Z,1478866051.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:31.332Z,1478866051.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:31.449Z,1478866051.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:31.489Z,1478866051.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:31.851Z,1478866051.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:31.871Z,1478866051.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:32.128Z,1478866052.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:32.256Z,1478866052.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:32.314Z,1478866052.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:32.651Z,1478866052.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:32.687Z,1478866052.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:32.924Z,1478866052.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:33.070Z,1478866053.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:33.102Z,1478866053.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:33.416Z,1478866053.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:33.460Z,1478866053.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:33.507Z,1478866053.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:33.858Z,1478866053.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:33.874Z,1478866053.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:34.212Z,1478866054.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:34.251Z,1478866054.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:34.337Z,1478866054.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:34.651Z,1478866054.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:34.713Z,1478866054.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:35.009Z,1478866055.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:35.051Z,1478866055.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:35.091Z,1478866055.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:35.451Z,1478866055.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:35.534Z,1478866055.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:35.740Z,1478866055.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:35.868Z,1478866055.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:35.907Z,1478866055.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:36.251Z,1478866056.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:36.291Z,1478866056.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:36.536Z,1478866056.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:36.655Z,1478866056.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:36.707Z,1478866056.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:37.058Z,1478866057.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:37.089Z,1478866057.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:37.333Z,1478866057.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:37.459Z,1478866057.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:37.490Z,1478866057.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:37.748Z,1478866057.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:37.851Z,1478866057.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:37.902Z,1478866057.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:38.258Z,1478866058.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:38.289Z,1478866058.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:38.545Z,1478866058.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:38.659Z,1478866058.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:38.683Z,1478866058.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:39.051Z,1478866059.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:39.089Z,1478866059.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:39.284Z,1478866059.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:39.451Z,1478866059.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:39.498Z,1478866059.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:39.849Z,1478866059.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:39.881Z,1478866059.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:40.080Z,1478866060.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:40.275Z,1478866060.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:40.293Z,1478866060.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:40.649Z,1478866060.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:40.664Z,1478866060.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:40.877Z,1478866060.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:41.061Z,1478866061.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:41.112Z,1478866061.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:41.459Z,1478866061.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:41.484Z,1478866061.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:41.672Z,1478866061.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:41.856Z,1478866061.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:41.871Z,1478866061.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:42.080Z,1478866062.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:42.264Z,1478866062.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:42.308Z,1478866062.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:42.654Z,1478866062.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:42.685Z,1478866062.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:42.876Z,1478866062.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:43.049Z,1478866063.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:43.074Z,1478866063.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:43.288Z,1478866063.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:43.449Z,1478866063.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:43.495Z,1478866063.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:43.868Z,1478866063.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:43.898Z,1478866063.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:44.084Z,1478866064.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:44.249Z,1478866064.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:44.280Z,1478866064.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:44.657Z,1478866064.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:44.689Z,1478866064.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:44.881Z,1478866064.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:45.057Z,1478866065.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:45.137Z,1478866065.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:45.292Z,1478866065.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:45.449Z,1478866065.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:45.477Z,1478866065.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:45.857Z,1478866065.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:45.873Z,1478866065.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:46.088Z,1478866066.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:46.256Z,1478866066.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:46.329Z,1478866066.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:46.651Z,1478866066.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:46.689Z,1478866066.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:46.884Z,1478866066.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:47.051Z,1478866067.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:47.095Z,1478866067.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:47.356Z,1478866067.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:47.459Z,1478866067.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:47.517Z,1478866067.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:47.854Z,1478866067.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:47.906Z,1478866067.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:48.152Z,1478866068.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:48.257Z,1478866068.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:48.304Z,1478866068.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:48.658Z,1478866068.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:48.709Z,1478866068.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:48.948Z,1478866068.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:49.060Z,1478866069.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:49.088Z,1478866069.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:49.451Z,1478866069.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:49.491Z,1478866069.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:49.730Z,1478866069.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:49.855Z,1478866069.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:49.901Z,1478866069.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:50.259Z,1478866070.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:50.303Z,1478866070.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:50.525Z,1478866070.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:50.651Z,1478866070.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:50.704Z,1478866070.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:51.051Z,1478866071.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:51.071Z,1478866071.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:51.321Z,1478866071.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:51.451Z,1478866071.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:51.494Z,1478866071.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:51.732Z,1478866071.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:51.866Z,1478866071.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:51.917Z,1478866071.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:52.264Z,1478866072.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:52.320Z,1478866072.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:52.528Z,1478866072.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:52.651Z,1478866072.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:52.693Z,1478866072.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:53.060Z,1478866073.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:53.084Z,1478866073.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:53.244Z,1478866073.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:53.451Z,1478866073.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:53.486Z,1478866073.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:53.851Z,1478866073.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:53.893Z,1478866073.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:54.041Z,1478866074.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:54.251Z,1478866074.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:54.305Z,1478866074.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:54.654Z,1478866074.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:54.692Z,1478866074.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:54.837Z,1478866074.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:55.061Z,1478866075.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:55.085Z,1478866075.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:55.252Z,1478866075.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:55.460Z,1478866075.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:55.490Z,1478866075.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:55.851Z,1478866075.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:55.893Z,1478866075.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:56.048Z,1478866076.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:56.251Z,1478866076.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:56.305Z,1478866076.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:56.655Z,1478866076.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:56.688Z,1478866076.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:56.845Z,1478866076.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:57.058Z,1478866077.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:57.082Z,1478866077.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:57.256Z,1478866077.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:57.463Z,1478866077.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:57.501Z,1478866077.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:57.858Z,1478866077.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:57.882Z,1478866077.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:58.052Z,1478866078.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:58.252Z,1478866078.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:58.284Z,1478866078.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:58.651Z,1478866078.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:58.689Z,1478866078.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:58.849Z,1478866078.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:59.051Z,1478866079.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:59.100Z,1478866079.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:59.260Z,1478866079.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:59.467Z,1478866079.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:59.553Z,1478866079.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:07:59.855Z,1478866079.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:07:59.941Z,1478866079.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:00.056Z,1478866080.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:00.256Z,1478866080.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:00.280Z,1478866080.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:00.659Z,1478866080.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:00.694Z,1478866080.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:00.852Z,1478866080.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:01.057Z,1478866081.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:01.077Z,1478866081.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:01.348Z,1478866081.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:01.449Z,1478866081.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:01.516Z,1478866081.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:01.849Z,1478866081.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:01.881Z,1478866081.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:02.144Z,1478866082.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:02.249Z,1478866082.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:02.294Z,1478866082.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:02.649Z,1478866082.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:02.705Z,1478866082.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:02.940Z,1478866082.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:03.053Z,1478866083.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:03.085Z,1478866083.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:03.449Z,1478866083.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:03.482Z,1478866083.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:03.696Z,1478866083.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:03.849Z,1478866083.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:03.881Z,1478866083.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:04.249Z,1478866084.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:04.283Z,1478866084.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:04.492Z,1478866084.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:04.649Z,1478866084.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:04.682Z,1478866084.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:05.049Z,1478866085.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:05.081Z,1478866085.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:05.289Z,1478866085.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:05.465Z,1478866085.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:05.485Z,1478866085.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:05.700Z,1478866085.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:05.853Z,1478866085.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:05.879Z,1478866085.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:06.249Z,1478866086.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:06.280Z,1478866086.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:06.649Z,1478866086.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:06.685Z,1478866086.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:07.049Z,1478866087.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:07.087Z,1478866087.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:07.449Z,1478866087.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:07.481Z,1478866087.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:07.850Z,1478866087.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:07.865Z,1478866087.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:08.254Z,1478866088.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:08.269Z,1478866088.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:08.654Z,1478866088.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:08.670Z,1478866088.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:09.061Z,1478866089.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:09.076Z,1478866089.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:09.456Z,1478866089.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:09.472Z,1478866089.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:09.856Z,1478866089.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:09.871Z,1478866089.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:10.256Z,1478866090.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:10.271Z,1478866090.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:10.656Z,1478866090.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:10.671Z,1478866090.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:11.057Z,1478866091.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:11.072Z,1478866091.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:11.453Z,1478866091.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:11.475Z,1478866091.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:11.857Z,1478866091.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:11.872Z,1478866091.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:12.060Z,1478866092.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:12.255Z,1478866092.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:12.271Z,1478866092.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:12.660Z,1478866092.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:12.680Z,1478866092.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:12.856Z,1478866092.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:13.049Z,1478866093.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:13.082Z,1478866093.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:13.264Z,1478866093.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:13.449Z,1478866093.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:13.505Z,1478866093.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:13.849Z,1478866093.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:13.885Z,1478866093.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:14.060Z,1478866094.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:14.856Z,1478866094.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:15.316Z,1478866095.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:16.112Z,1478866096.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:16.908Z,1478866096.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:17.521Z,1478866097.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:17.566Z,1478866097.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:17.686Z,1478866097.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:17.688Z,1478866097.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:17.717Z,1478866097.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:18.064Z,1478866098.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:18.121Z,1478866098.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:18.464Z,1478866098.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:18.480Z,1478866098.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:18.486Z,1478866098.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:18.867Z,1478866098.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:18.925Z,1478866098.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:19.276Z,1478866099.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:19.323Z,1478866099.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:19.397Z,1478866099.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:19.657Z,1478866099.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:19.706Z,1478866099.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:19.748Z,1478866099.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:20.061Z,1478866100.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:20.100Z,1478866100.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:20.457Z,1478866100.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:20.479Z,1478866100.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:20.862Z,1478866100.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:20.890Z,1478866100.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:21.268Z,1478866101.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:21.286Z,1478866101.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:21.664Z,1478866101.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:21.680Z,1478866101.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:22.064Z,1478866102.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:22.080Z,1478866102.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:22.465Z,1478866102.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:22.482Z,1478866102.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:22.864Z,1478866102.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:22.892Z,1478866102.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:23.257Z,1478866103.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:23.285Z,1478866103.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:23.657Z,1478866103.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:23.694Z,1478866103.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:24.057Z,1478866104.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:24.099Z,1478866104.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:24.457Z,1478866104.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:24.494Z,1478866104.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:24.878Z,1478866104.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:24.912Z,1478866104.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:25.265Z,1478866105.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:25.311Z,1478866105.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:25.664Z,1478866105.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:25.681Z,1478866105.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:26.066Z,1478866106.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:26.083Z,1478866106.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:26.468Z,1478866106.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:26.490Z,1478866106.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:26.871Z,1478866106.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:26.928Z,1478866106.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:27.266Z,1478866107.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:27.327Z,1478866107.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:27.668Z,1478866107.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:27.685Z,1478866107.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:28.060Z,1478866108.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:28.097Z,1478866108.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:28.457Z,1478866108.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:28.494Z,1478866108.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:28.889Z,1478866108.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:28.948Z,1478866108.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:29.257Z,1478866109.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:29.295Z,1478866109.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:29.660Z,1478866109.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:29.713Z,1478866109.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:30.063Z,1478866110.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:30.088Z,1478866110.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:30.463Z,1478866110.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:30.493Z,1478866110.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:30.864Z,1478866110.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:30.934Z,1478866110.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:31.303Z,1478866111.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:31.367Z,1478866111.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:31.657Z,1478866111.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:31.689Z,1478866111.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:32.060Z,1478866112.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:32.101Z,1478866112.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:32.461Z,1478866112.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:32.572Z,1478866112.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:32.863Z,1478866112.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:32.893Z,1478866112.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:33.288Z,1478866113.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:33.350Z,1478866113.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:33.665Z,1478866113.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:33.723Z,1478866113.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:34.064Z,1478866114.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:34.085Z,1478866114.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:34.468Z,1478866114.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:34.489Z,1478866114.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:34.857Z,1478866114.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:34.884Z,1478866114.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:35.268Z,1478866115.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:35.293Z,1478866115.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:35.657Z,1478866115.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:35.691Z,1478866115.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:36.057Z,1478866116.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:36.091Z,1478866116.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:36.457Z,1478866116.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:36.495Z,1478866116.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:36.868Z,1478866116.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:36.895Z,1478866116.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:37.261Z,1478866117.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:37.293Z,1478866117.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:37.657Z,1478866117.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:37.674Z,1478866117.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:38.061Z,1478866118.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:38.079Z,1478866118.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:38.462Z,1478866118.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:38.479Z,1478866118.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:38.877Z,1478866118.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:38.905Z,1478866118.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:39.267Z,1478866119.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:39.290Z,1478866119.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:39.665Z,1478866119.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:39.682Z,1478866119.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:40.064Z,1478866120.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:40.089Z,1478866120.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:40.468Z,1478866120.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:40.497Z,1478866120.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:40.857Z,1478866120.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:40.892Z,1478866120.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:41.265Z,1478866121.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:41.297Z,1478866121.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:41.661Z,1478866121.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:41.690Z,1478866121.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:42.065Z,1478866122.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:42.097Z,1478866122.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:42.457Z,1478866122.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:42.497Z,1478866122.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:42.906Z,1478866122.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:42.947Z,1478866122.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:43.257Z,1478866123.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:43.303Z,1478866123.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:43.657Z,1478866123.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:43.737Z,1478866123.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:44.076Z,1478866124.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:44.149Z,1478866124.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:44.457Z,1478866124.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:44.494Z,1478866124.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:44.857Z,1478866124.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:44.889Z,1478866124.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:45.271Z,1478866125.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:45.323Z,1478866125.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:45.665Z,1478866125.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:45.721Z,1478866125.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:46.064Z,1478866126.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:46.085Z,1478866126.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:46.465Z,1478866126.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:46.482Z,1478866126.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:46.864Z,1478866126.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:46.923Z,1478866126.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:47.269Z,1478866127.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:47.333Z,1478866127.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:47.661Z,1478866127.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:47.717Z,1478866127.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:48.057Z,1478866128.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:48.113Z,1478866128.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:48.457Z,1478866128.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:48.502Z,1478866128.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:48.857Z,1478866128.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:48.906Z,1478866128.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:49.257Z,1478866129.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:49.341Z,1478866129.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:49.657Z,1478866129.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:49.679Z,1478866129.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:50.061Z,1478866130.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:50.079Z,1478866130.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:50.463Z,1478866130.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:50.484Z,1478866130.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:50.874Z,1478866130.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:50.890Z,1478866130.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:51.269Z,1478866131.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:51.293Z,1478866131.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:51.657Z,1478866131.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:51.692Z,1478866131.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:52.057Z,1478866132.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:52.102Z,1478866132.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:52.464Z,1478866132.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:52.496Z,1478866132.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:52.865Z,1478866132.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:52.893Z,1478866132.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:53.257Z,1478866133.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:53.300Z,1478866133.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:53.658Z,1478866133.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:53.685Z,1478866133.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:54.057Z,1478866134.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:54.096Z,1478866134.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:54.458Z,1478866134.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:54.497Z,1478866134.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:54.866Z,1478866134.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:54.895Z,1478866134.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:55.266Z,1478866135.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:55.305Z,1478866135.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:55.657Z,1478866135.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:55.701Z,1478866135.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:56.057Z,1478866136.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:56.092Z,1478866136.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:56.465Z,1478866136.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:56.502Z,1478866136.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:56.883Z,1478866136.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:56.927Z,1478866136.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:57.264Z,1478866137.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:57.282Z,1478866137.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:57.664Z,1478866137.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:57.681Z,1478866137.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:58.064Z,1478866138.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:58.089Z,1478866138.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:58.460Z,1478866138.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:58.501Z,1478866138.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:58.861Z,1478866138.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:58.913Z,1478866138.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:59.259Z,1478866139.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:59.304Z,1478866139.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:08:59.657Z,1478866139.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:08:59.697Z,1478866139.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:00.064Z,1478866140.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:00.121Z,1478866140.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:00.457Z,1478866140.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:00.518Z,1478866140.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:00.857Z,1478866140.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:00.892Z,1478866140.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:01.282Z,1478866141.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:01.345Z,1478866141.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:01.657Z,1478866141.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:01.681Z,1478866141.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:02.057Z,1478866142.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:02.109Z,1478866142.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:02.457Z,1478866142.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:02.509Z,1478866142.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:02.857Z,1478866142.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:02.874Z,1478866142.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:03.260Z,1478866143.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:03.285Z,1478866143.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:03.660Z,1478866143.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:03.698Z,1478866143.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:04.064Z,1478866144.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:04.093Z,1478866144.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:04.465Z,1478866144.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:04.530Z,1478866144.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:04.873Z,1478866144.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:04.889Z,1478866144.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:05.257Z,1478866145.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:05.299Z,1478866145.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:05.657Z,1478866145.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:05.705Z,1478866145.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:06.057Z,1478866146.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:06.134Z,1478866146.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:06.457Z,1478866146.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:06.492Z,1478866146.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:06.869Z,1478866146.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:06.886Z,1478866146.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:07.265Z,1478866147.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:07.286Z,1478866147.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:07.664Z,1478866147.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:07.681Z,1478866147.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:08.064Z,1478866148.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:08.084Z,1478866148.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:08.467Z,1478866148.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:08.488Z,1478866148.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:08.874Z,1478866148.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:08.890Z,1478866148.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:09.257Z,1478866149.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:09.291Z,1478866149.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:09.657Z,1478866149.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:09.685Z,1478866149.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:10.057Z,1478866150.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:10.099Z,1478866150.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:10.457Z,1478866150.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:10.499Z,1478866150.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:10.862Z,1478866150.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:10.910Z,1478866150.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:11.257Z,1478866151.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:11.279Z,1478866151.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:11.664Z,1478866151.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:11.682Z,1478866151.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:12.060Z,1478866152.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:12.078Z,1478866152.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:12.464Z,1478866152.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:12.481Z,1478866152.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:12.864Z,1478866152.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:12.881Z,1478866152.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:13.264Z,1478866153.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:13.282Z,1478866153.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:13.290Z,1478866153.290 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T12:09:13.290Z,1478866153.290 [Default:CheckIn:C.Wait] Stopped
2016-11-11T12:09:13.290Z,1478866153.290 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T12:09:13.290Z,1478866153.290 [Default:CheckIn:D] Running Loop=1
2016-11-11T12:09:13.656Z,1478866153.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:13.721Z,1478866153.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:13.743Z,1478866153.743 [Default:CheckIn:D] Stopped
2016-11-11T12:09:13.743Z,1478866153.743 [Default:CheckIn:E] Running Loop=1
2016-11-11T12:09:14.057Z,1478866154.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:14.089Z,1478866154.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:14.115Z,1478866154.115 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 439.207129 min 
2016-11-11T12:09:14.116Z,1478866154.115 [Default:CheckIn:E] Stopped
2016-11-11T12:09:14.116Z,1478866154.116 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T12:09:14.116Z,1478866154.116 [Default:CheckIn] Stopped
2016-11-11T12:09:14.116Z,1478866154.116 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T12:09:14.116Z,1478866154.116 [Default:CheckIn](INFO): Running loop #43
2016-11-11T12:09:14.116Z,1478866154.116 [Default:CheckIn] Running Loop=43
2016-11-11T12:09:14.116Z,1478866154.116 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T12:09:14.116Z,1478866154.116 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T12:09:17.644Z,1478866157.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:17.726Z,1478866157.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:17.816Z,1478866157.816 [NAL9602](INFO): Powering up
2016-11-11T12:09:17.839Z,1478866157.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:17.877Z,1478866157.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:18.205Z,1478866158.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:18.237Z,1478866158.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:18.601Z,1478866158.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:18.627Z,1478866158.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:19.001Z,1478866159.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:19.041Z,1478866159.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:19.401Z,1478866159.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:19.454Z,1478866159.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:19.805Z,1478866159.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:19.845Z,1478866159.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:20.201Z,1478866160.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:20.246Z,1478866160.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:20.604Z,1478866160.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:20.654Z,1478866160.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:21.010Z,1478866161.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:21.026Z,1478866161.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:21.408Z,1478866161.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:21.424Z,1478866161.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:21.807Z,1478866161.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:21.829Z,1478866161.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:22.208Z,1478866162.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:22.223Z,1478866162.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:22.608Z,1478866162.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:22.624Z,1478866162.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:23.001Z,1478866163.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:23.034Z,1478866163.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:23.401Z,1478866163.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:23.435Z,1478866163.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:23.801Z,1478866163.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:23.833Z,1478866163.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:24.201Z,1478866164.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:24.241Z,1478866164.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:24.601Z,1478866164.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:24.616Z,1478866164.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:25.001Z,1478866165.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:25.021Z,1478866165.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:25.406Z,1478866165.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:25.421Z,1478866165.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:25.806Z,1478866165.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:25.821Z,1478866165.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:26.204Z,1478866166.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:26.220Z,1478866166.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:26.608Z,1478866166.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:26.623Z,1478866166.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:27.013Z,1478866167.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:27.027Z,1478866167.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:27.408Z,1478866167.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:27.423Z,1478866167.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:27.816Z,1478866167.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:27.837Z,1478866167.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:28.212Z,1478866168.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:28.233Z,1478866168.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:28.622Z,1478866168.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:28.638Z,1478866168.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:28.989Z,1478866168.989 [NAL9602](INFO): NAL9602 initialized
2016-11-11T12:09:29.006Z,1478866169.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:29.036Z,1478866169.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:29.401Z,1478866169.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:29.440Z,1478866169.440 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:29.440Z,1478866169.440 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 127
2016-11-11T12:09:29.440Z,1478866169.440 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:09:29.447Z,1478866169.447 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:29.447Z,1478866169.447 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 127
2016-11-11T12:09:29.447Z,1478866169.447 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:09:29.449Z,1478866169.449 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:29.449Z,1478866169.449 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 127
2016-11-11T12:09:29.449Z,1478866169.449 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:09:29.487Z,1478866169.487 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:09:29.487Z,1478866169.487 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:09:29.488Z,1478866169.488 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:09:29.793Z,1478866169.793 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T12:09:29.793Z,1478866169.793 [NAL9602] Data Fault, FailCount= 3
2016-11-11T12:09:29.793Z,1478866169.793 [NAL9602](ERROR): Data Fault
2016-11-11T12:09:29.811Z,1478866169.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:29.875Z,1478866169.875 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:09:29.875Z,1478866169.875 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 127
2016-11-11T12:09:29.880Z,1478866169.880 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:09:29.880Z,1478866169.880 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 127
2016-11-11T12:09:29.880Z,1478866169.880 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:09:29.881Z,1478866169.881 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 127
2016-11-11T12:09:29.881Z,1478866169.881 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T12:09:30.196Z,1478866170.196 [NAL9602](INFO): Powering down
2016-11-11T12:09:30.213Z,1478866170.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:30.252Z,1478866170.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:09:30.253Z,1478866170.253 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:09:30.253Z,1478866170.253 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:09:30.258Z,1478866170.258 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:09:30.258Z,1478866170.258 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:09:30.259Z,1478866170.259 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:09:30.259Z,1478866170.259 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:09:30.259Z,1478866170.260 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:09:30.260Z,1478866170.260 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:09:30.608Z,1478866170.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:30.624Z,1478866170.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:31.004Z,1478866171.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:31.036Z,1478866171.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:31.076Z,1478866171.076 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T12:09:31.076Z,1478866171.076 [NAL9602] No Fault, FailCount= 3
2016-11-11T12:09:31.401Z,1478866171.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:31.453Z,1478866171.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:31.806Z,1478866171.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:31.821Z,1478866171.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:32.204Z,1478866172.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:32.220Z,1478866172.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:32.609Z,1478866172.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:32.694Z,1478866172.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:33.001Z,1478866173.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:33.021Z,1478866173.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:33.401Z,1478866173.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:33.457Z,1478866173.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:33.813Z,1478866173.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:33.844Z,1478866173.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:34.208Z,1478866174.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:34.257Z,1478866174.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:34.608Z,1478866174.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:34.709Z,1478866174.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:35.011Z,1478866175.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:35.027Z,1478866175.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:35.384Z,1478866175.385 [NAL9602](INFO): Powering up NAL9602
2016-11-11T12:09:35.414Z,1478866175.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:35.429Z,1478866175.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:35.812Z,1478866175.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:35.827Z,1478866175.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:36.216Z,1478866176.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:36.232Z,1478866176.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:36.601Z,1478866176.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:36.635Z,1478866176.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:37.006Z,1478866177.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:37.021Z,1478866177.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:37.409Z,1478866177.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:37.424Z,1478866177.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:37.808Z,1478866177.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:37.823Z,1478866177.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:38.208Z,1478866178.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:38.224Z,1478866178.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:38.613Z,1478866178.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:38.628Z,1478866178.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:39.006Z,1478866179.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:39.025Z,1478866179.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:39.408Z,1478866179.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:39.435Z,1478866179.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:39.801Z,1478866179.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:39.833Z,1478866179.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:40.201Z,1478866180.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:40.260Z,1478866180.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:40.601Z,1478866180.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:40.624Z,1478866180.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:41.004Z,1478866181.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:41.038Z,1478866181.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:41.401Z,1478866181.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:41.421Z,1478866181.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:41.804Z,1478866181.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:41.820Z,1478866181.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:42.208Z,1478866182.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:42.224Z,1478866182.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:42.607Z,1478866182.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:42.629Z,1478866182.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:43.009Z,1478866183.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:43.024Z,1478866183.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:43.415Z,1478866183.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:43.431Z,1478866183.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:43.812Z,1478866183.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:43.827Z,1478866183.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:44.201Z,1478866184.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:44.226Z,1478866184.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:44.605Z,1478866184.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:44.692Z,1478866184.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:45.001Z,1478866185.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:45.037Z,1478866185.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:45.401Z,1478866185.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:45.416Z,1478866185.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:45.805Z,1478866185.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:45.821Z,1478866185.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:46.212Z,1478866186.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:46.240Z,1478866186.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:46.589Z,1478866186.589 [NAL9602](INFO): NAL9602 initialized
2016-11-11T12:09:46.606Z,1478866186.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:46.657Z,1478866186.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:47.006Z,1478866187.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:47.075Z,1478866187.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:47.416Z,1478866187.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:47.447Z,1478866187.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:47.824Z,1478866187.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:47.840Z,1478866187.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:48.220Z,1478866188.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:48.275Z,1478866188.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:48.602Z,1478866188.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:48.682Z,1478866188.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:49.002Z,1478866189.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:49.050Z,1478866189.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:49.416Z,1478866189.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:49.469Z,1478866189.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:49.801Z,1478866189.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:49.845Z,1478866189.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:50.205Z,1478866190.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:50.229Z,1478866190.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:50.605Z,1478866190.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:50.687Z,1478866190.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:51.005Z,1478866191.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:51.042Z,1478866191.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:51.401Z,1478866191.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:51.438Z,1478866191.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:51.801Z,1478866191.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:51.834Z,1478866191.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:52.201Z,1478866192.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:52.233Z,1478866192.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:52.601Z,1478866192.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:52.633Z,1478866192.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:53.001Z,1478866193.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:53.042Z,1478866193.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:53.401Z,1478866193.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:53.433Z,1478866193.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:53.801Z,1478866193.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:53.833Z,1478866193.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:54.201Z,1478866194.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:54.234Z,1478866194.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:54.601Z,1478866194.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:54.639Z,1478866194.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:55.001Z,1478866195.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:55.029Z,1478866195.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:55.410Z,1478866195.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:55.424Z,1478866195.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:55.807Z,1478866195.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:55.823Z,1478866195.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:56.208Z,1478866196.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:56.225Z,1478866196.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:56.609Z,1478866196.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:56.625Z,1478866196.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:57.004Z,1478866197.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:57.032Z,1478866197.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:57.412Z,1478866197.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:57.446Z,1478866197.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:57.816Z,1478866197.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:57.854Z,1478866197.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:58.201Z,1478866198.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:58.240Z,1478866198.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:58.605Z,1478866198.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:58.696Z,1478866198.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:59.009Z,1478866199.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:59.024Z,1478866199.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:59.409Z,1478866199.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:59.429Z,1478866199.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:09:59.811Z,1478866199.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:09:59.827Z,1478866199.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:00.209Z,1478866200.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:00.225Z,1478866200.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:00.615Z,1478866200.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:00.704Z,1478866200.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:01.001Z,1478866201.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:01.036Z,1478866201.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:01.405Z,1478866201.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:01.497Z,1478866201.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:01.816Z,1478866201.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:01.850Z,1478866201.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:02.212Z,1478866202.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:02.244Z,1478866202.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:02.601Z,1478866202.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:02.724Z,1478866202.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:03.013Z,1478866203.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:03.062Z,1478866203.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:03.401Z,1478866203.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:03.460Z,1478866203.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:03.801Z,1478866203.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:03.850Z,1478866203.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:04.201Z,1478866204.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:04.237Z,1478866204.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:04.610Z,1478866204.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:04.684Z,1478866204.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:05.001Z,1478866205.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:05.045Z,1478866205.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:05.401Z,1478866205.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:05.438Z,1478866205.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:05.801Z,1478866205.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:05.844Z,1478866205.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:06.208Z,1478866206.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:06.223Z,1478866206.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:06.604Z,1478866206.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:06.643Z,1478866206.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:07.018Z,1478866207.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:07.036Z,1478866207.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:07.412Z,1478866207.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:07.428Z,1478866207.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:07.804Z,1478866207.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:07.833Z,1478866207.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:08.201Z,1478866208.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:08.240Z,1478866208.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:08.601Z,1478866208.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:08.637Z,1478866208.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:09.012Z,1478866209.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:09.038Z,1478866209.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:09.406Z,1478866209.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:09.446Z,1478866209.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:09.808Z,1478866209.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:09.825Z,1478866209.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:10.216Z,1478866210.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:10.249Z,1478866210.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:10.621Z,1478866210.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:10.657Z,1478866210.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:11.010Z,1478866211.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:11.038Z,1478866211.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:11.401Z,1478866211.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:11.434Z,1478866211.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:11.805Z,1478866211.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:11.840Z,1478866211.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:12.203Z,1478866212.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:12.225Z,1478866212.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:12.656Z,1478866212.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:12.692Z,1478866212.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:13.005Z,1478866213.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:13.049Z,1478866213.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:13.402Z,1478866213.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:13.437Z,1478866213.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:13.804Z,1478866213.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:13.821Z,1478866213.821 [PNI_TCM](ERROR): CRC does not match. Expected:0x45452 got:0x6978
2016-11-11T12:10:13.849Z,1478866213.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:14.220Z,1478866214.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:14.253Z,1478866214.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:17.641Z,1478866217.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:17.735Z,1478866217.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:17.819Z,1478866217.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:17.847Z,1478866217.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:18.220Z,1478866218.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:18.253Z,1478866218.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:18.654Z,1478866218.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:18.698Z,1478866218.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:19.023Z,1478866219.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:19.077Z,1478866219.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:19.427Z,1478866219.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:19.461Z,1478866219.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:19.824Z,1478866219.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:19.878Z,1478866219.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:20.221Z,1478866220.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:20.241Z,1478866220.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:20.625Z,1478866220.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:20.678Z,1478866220.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:21.031Z,1478866221.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:21.058Z,1478866221.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:21.419Z,1478866221.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:21.451Z,1478866221.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:21.817Z,1478866221.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:21.853Z,1478866221.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:22.219Z,1478866222.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:22.236Z,1478866222.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:22.619Z,1478866222.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:22.635Z,1478866222.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:23.036Z,1478866223.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:23.130Z,1478866223.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:23.425Z,1478866223.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:23.445Z,1478866223.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:23.823Z,1478866223.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:23.854Z,1478866223.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:24.227Z,1478866224.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:24.242Z,1478866224.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:24.626Z,1478866224.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:24.648Z,1478866224.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:25.020Z,1478866225.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:25.112Z,1478866225.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:25.419Z,1478866225.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:25.453Z,1478866225.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:25.820Z,1478866225.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:25.853Z,1478866225.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:26.217Z,1478866226.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:26.253Z,1478866226.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:26.625Z,1478866226.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:26.681Z,1478866226.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:27.024Z,1478866227.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:27.039Z,1478866227.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:27.422Z,1478866227.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:27.437Z,1478866227.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:27.827Z,1478866227.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:27.842Z,1478866227.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:28.227Z,1478866228.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:28.242Z,1478866228.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:28.641Z,1478866228.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:28.681Z,1478866228.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:29.025Z,1478866229.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:29.049Z,1478866229.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:29.417Z,1478866229.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:29.453Z,1478866229.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:29.817Z,1478866229.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:29.850Z,1478866229.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:30.220Z,1478866230.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:30.254Z,1478866230.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:30.654Z,1478866230.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:30.712Z,1478866230.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:31.018Z,1478866231.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:31.062Z,1478866231.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:31.417Z,1478866231.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:31.437Z,1478866231.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:31.823Z,1478866231.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:31.856Z,1478866231.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:32.225Z,1478866232.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:32.245Z,1478866232.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:32.631Z,1478866232.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:32.713Z,1478866232.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:33.017Z,1478866233.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:33.052Z,1478866233.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:33.419Z,1478866233.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:33.482Z,1478866233.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:33.802Z,1478866233.802 [NAL9602](INFO): SBD MO Status=0, MOMSN=344, MT Status=0, MTMSN=0
2016-11-11T12:10:33.802Z,1478866233.802 [NAL9602](INFO): No messages in MT queue
2016-11-11T12:10:33.819Z,1478866233.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:33.861Z,1478866233.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:34.217Z,1478866234.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:34.266Z,1478866234.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:34.632Z,1478866234.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:34.725Z,1478866234.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:35.032Z,1478866235.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:35.065Z,1478866235.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:35.444Z,1478866235.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:35.471Z,1478866235.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:35.817Z,1478866235.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:35.857Z,1478866235.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:36.218Z,1478866236.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:36.233Z,1478866236.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:36.621Z,1478866236.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:36.641Z,1478866236.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:37.038Z,1478866237.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:37.100Z,1478866237.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:37.434Z,1478866237.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:37.465Z,1478866237.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:37.840Z,1478866237.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:37.861Z,1478866237.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:38.217Z,1478866238.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:38.243Z,1478866238.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:38.632Z,1478866238.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:38.653Z,1478866238.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:39.040Z,1478866239.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:39.100Z,1478866239.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:39.422Z,1478866239.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:39.442Z,1478866239.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:39.836Z,1478866239.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:39.851Z,1478866239.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:40.232Z,1478866240.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:40.247Z,1478866240.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:40.636Z,1478866240.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:40.669Z,1478866240.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:41.022Z,1478866241.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:41.058Z,1478866241.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:41.417Z,1478866241.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:41.443Z,1478866241.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:41.817Z,1478866241.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:41.853Z,1478866241.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:42.218Z,1478866242.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:42.253Z,1478866242.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:42.644Z,1478866242.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:42.664Z,1478866242.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:43.032Z,1478866243.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:43.055Z,1478866243.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:43.446Z,1478866243.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:43.461Z,1478866243.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:43.836Z,1478866243.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:43.868Z,1478866243.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:44.218Z,1478866244.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:44.246Z,1478866244.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:44.627Z,1478866244.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:44.669Z,1478866244.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:45.026Z,1478866245.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:45.042Z,1478866245.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:45.418Z,1478866245.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:45.437Z,1478866245.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:45.836Z,1478866245.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:45.871Z,1478866245.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:46.236Z,1478866246.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:46.252Z,1478866246.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:46.641Z,1478866246.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:46.713Z,1478866246.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:47.033Z,1478866247.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:47.049Z,1478866247.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:47.417Z,1478866247.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:47.466Z,1478866247.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:47.822Z,1478866247.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:47.857Z,1478866247.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:48.218Z,1478866248.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:48.258Z,1478866248.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:48.618Z,1478866248.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:48.722Z,1478866248.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:49.041Z,1478866249.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:49.064Z,1478866249.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:49.439Z,1478866249.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:49.454Z,1478866249.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:49.840Z,1478866249.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:49.861Z,1478866249.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:49.876Z,1478866249.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:50.217Z,1478866250.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:50.253Z,1478866250.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:50.617Z,1478866250.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:50.652Z,1478866250.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:50.672Z,1478866250.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:51.069Z,1478866251.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:51.101Z,1478866251.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:51.421Z,1478866251.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:51.444Z,1478866251.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:51.828Z,1478866251.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:51.856Z,1478866251.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:52.231Z,1478866252.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:52.247Z,1478866252.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:52.630Z,1478866252.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:52.650Z,1478866252.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:53.091Z,1478866253.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:53.138Z,1478866253.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:53.417Z,1478866253.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:53.454Z,1478866253.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:53.817Z,1478866253.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:53.851Z,1478866253.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:54.226Z,1478866254.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:54.255Z,1478866254.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:54.619Z,1478866254.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:54.653Z,1478866254.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:55.028Z,1478866255.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:55.055Z,1478866255.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:55.436Z,1478866255.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:55.472Z,1478866255.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:55.832Z,1478866255.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:55.847Z,1478866255.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:56.220Z,1478866256.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:56.257Z,1478866256.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:56.632Z,1478866256.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:56.664Z,1478866256.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:57.018Z,1478866257.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:57.053Z,1478866257.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:57.417Z,1478866257.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:57.453Z,1478866257.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:57.839Z,1478866257.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:57.855Z,1478866257.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:58.236Z,1478866258.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:58.267Z,1478866258.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:58.630Z,1478866258.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:58.670Z,1478866258.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:59.019Z,1478866259.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:59.047Z,1478866259.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:59.417Z,1478866259.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:59.433Z,1478866259.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:10:59.822Z,1478866259.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:10:59.854Z,1478866259.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:00.222Z,1478866260.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:00.243Z,1478866260.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:00.626Z,1478866260.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:00.701Z,1478866260.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:01.038Z,1478866261.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:01.057Z,1478866261.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:01.438Z,1478866261.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:01.488Z,1478866261.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:01.840Z,1478866261.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:01.855Z,1478866261.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:02.229Z,1478866262.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:02.287Z,1478866262.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:02.645Z,1478866262.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:02.729Z,1478866262.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:03.018Z,1478866263.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:03.065Z,1478866263.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:03.417Z,1478866263.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:03.433Z,1478866263.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:03.836Z,1478866263.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:03.869Z,1478866263.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:04.232Z,1478866264.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:04.266Z,1478866264.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:04.636Z,1478866264.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:04.662Z,1478866264.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:05.031Z,1478866265.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:05.073Z,1478866265.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:05.417Z,1478866265.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:05.445Z,1478866265.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:05.817Z,1478866265.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:05.852Z,1478866265.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:06.223Z,1478866266.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:06.260Z,1478866266.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:06.618Z,1478866266.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:06.659Z,1478866266.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:07.045Z,1478866267.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:07.093Z,1478866267.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:07.437Z,1478866267.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:07.474Z,1478866267.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:07.832Z,1478866267.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:07.865Z,1478866267.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:08.221Z,1478866268.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:08.241Z,1478866268.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:08.625Z,1478866268.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:08.641Z,1478866268.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:09.026Z,1478866269.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:09.049Z,1478866269.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:09.421Z,1478866269.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:09.441Z,1478866269.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:09.840Z,1478866269.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:09.885Z,1478866269.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:10.240Z,1478866270.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:10.256Z,1478866270.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:10.636Z,1478866270.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:10.651Z,1478866270.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:11.023Z,1478866271.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:11.058Z,1478866271.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:11.417Z,1478866271.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:11.449Z,1478866271.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:11.817Z,1478866271.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:11.849Z,1478866271.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:12.218Z,1478866272.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:12.253Z,1478866272.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:12.634Z,1478866272.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:12.650Z,1478866272.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:13.032Z,1478866273.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:13.055Z,1478866273.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:13.447Z,1478866273.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:13.463Z,1478866273.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:13.841Z,1478866273.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:13.862Z,1478866273.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:14.218Z,1478866274.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:14.273Z,1478866274.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:17.625Z,1478866277.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:17.680Z,1478866277.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:17.794Z,1478866277.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:17.814Z,1478866277.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:18.180Z,1478866278.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:18.209Z,1478866278.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:18.586Z,1478866278.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:18.634Z,1478866278.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:19.042Z,1478866279.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:19.081Z,1478866279.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:19.369Z,1478866279.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:19.429Z,1478866279.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:19.769Z,1478866279.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:19.818Z,1478866279.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:20.171Z,1478866280.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:20.209Z,1478866280.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:20.569Z,1478866280.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:20.597Z,1478866280.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:21.037Z,1478866281.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:21.075Z,1478866281.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:21.392Z,1478866281.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:21.428Z,1478866281.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:21.788Z,1478866281.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:21.826Z,1478866281.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:22.178Z,1478866282.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:22.193Z,1478866282.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:22.579Z,1478866282.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:22.613Z,1478866282.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:22.972Z,1478866282.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:23.005Z,1478866283.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:23.369Z,1478866283.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:23.405Z,1478866283.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:23.784Z,1478866283.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:23.812Z,1478866283.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:24.195Z,1478866284.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:24.211Z,1478866284.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:24.589Z,1478866284.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:24.609Z,1478866284.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:24.969Z,1478866284.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:25.005Z,1478866285.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:25.373Z,1478866285.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:25.401Z,1478866285.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:25.770Z,1478866285.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:25.813Z,1478866285.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:26.174Z,1478866286.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:26.202Z,1478866286.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:26.577Z,1478866286.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:26.613Z,1478866286.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:26.988Z,1478866286.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:27.004Z,1478866287.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:27.393Z,1478866287.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:27.412Z,1478866287.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:27.792Z,1478866287.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:27.818Z,1478866287.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:28.170Z,1478866288.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:28.201Z,1478866288.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:28.580Z,1478866288.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:28.616Z,1478866288.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:28.978Z,1478866288.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:29.017Z,1478866289.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:29.377Z,1478866289.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:29.393Z,1478866289.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:29.780Z,1478866289.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:29.796Z,1478866289.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:30.188Z,1478866290.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:30.203Z,1478866290.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:30.596Z,1478866290.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:30.663Z,1478866290.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:30.970Z,1478866290.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:30.997Z,1478866290.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:31.384Z,1478866291.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:31.400Z,1478866291.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:31.774Z,1478866291.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:31.806Z,1478866291.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:32.170Z,1478866292.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:32.241Z,1478866292.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:32.573Z,1478866292.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:32.599Z,1478866292.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:33.004Z,1478866293.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:33.057Z,1478866293.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:33.393Z,1478866293.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:33.417Z,1478866293.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:33.814Z,1478866293.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:33.868Z,1478866293.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:34.178Z,1478866294.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:34.237Z,1478866294.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:34.577Z,1478866294.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:34.592Z,1478866294.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:34.993Z,1478866294.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:35.038Z,1478866295.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:35.377Z,1478866295.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:35.392Z,1478866295.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:35.782Z,1478866295.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:35.813Z,1478866295.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:36.190Z,1478866296.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:36.214Z,1478866296.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:36.588Z,1478866296.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:36.603Z,1478866296.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:36.969Z,1478866296.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:37.001Z,1478866297.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:37.369Z,1478866297.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:37.401Z,1478866297.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:37.774Z,1478866297.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:37.799Z,1478866297.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:38.171Z,1478866298.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:38.207Z,1478866298.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:38.569Z,1478866298.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:38.601Z,1478866298.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:38.991Z,1478866298.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:39.010Z,1478866299.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:39.391Z,1478866299.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:39.425Z,1478866299.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:39.780Z,1478866299.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:39.817Z,1478866299.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:40.169Z,1478866300.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:40.184Z,1478866300.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:40.581Z,1478866300.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:40.613Z,1478866300.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:40.975Z,1478866300.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:40.991Z,1478866300.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:41.374Z,1478866301.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:41.393Z,1478866301.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:41.788Z,1478866301.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:41.814Z,1478866301.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:42.185Z,1478866302.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:42.221Z,1478866302.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:42.600Z,1478866302.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:42.633Z,1478866302.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:42.973Z,1478866302.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:43.005Z,1478866303.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:43.376Z,1478866303.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:43.397Z,1478866303.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:43.779Z,1478866303.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:43.801Z,1478866303.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:44.171Z,1478866304.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:44.209Z,1478866304.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:44.608Z,1478866304.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:44.658Z,1478866304.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:44.984Z,1478866304.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:45.021Z,1478866305.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:45.392Z,1478866305.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:45.421Z,1478866305.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:45.784Z,1478866305.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:45.845Z,1478866305.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:46.178Z,1478866306.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:46.241Z,1478866306.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:46.572Z,1478866306.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:46.595Z,1478866306.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:47.002Z,1478866307.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:47.045Z,1478866307.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:47.370Z,1478866307.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:47.398Z,1478866307.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:47.788Z,1478866307.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:47.837Z,1478866307.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:48.191Z,1478866308.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:48.239Z,1478866308.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:48.591Z,1478866308.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:48.606Z,1478866308.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:48.990Z,1478866308.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:49.022Z,1478866309.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:49.373Z,1478866309.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:49.405Z,1478866309.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:49.769Z,1478866309.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:49.807Z,1478866309.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:50.171Z,1478866310.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:50.202Z,1478866310.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:50.569Z,1478866310.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:50.612Z,1478866310.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:50.984Z,1478866310.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:51.021Z,1478866311.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:51.384Z,1478866311.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:51.419Z,1478866311.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:51.780Z,1478866311.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:51.801Z,1478866311.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:52.176Z,1478866312.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:52.191Z,1478866312.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:52.575Z,1478866312.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:52.590Z,1478866312.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:52.980Z,1478866312.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:52.996Z,1478866312.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:53.377Z,1478866313.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:53.392Z,1478866313.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:53.782Z,1478866313.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:53.798Z,1478866313.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:54.191Z,1478866314.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:54.206Z,1478866314.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:54.599Z,1478866314.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:54.614Z,1478866314.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:54.969Z,1478866314.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:55.005Z,1478866315.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:55.377Z,1478866315.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:55.406Z,1478866315.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:55.774Z,1478866315.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:55.805Z,1478866315.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:56.175Z,1478866316.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:56.206Z,1478866316.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:56.574Z,1478866316.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:56.601Z,1478866316.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:56.984Z,1478866316.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:57.020Z,1478866317.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:57.388Z,1478866317.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:57.420Z,1478866317.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:57.780Z,1478866317.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:57.801Z,1478866317.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:58.176Z,1478866318.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:58.191Z,1478866318.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:58.600Z,1478866318.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:58.649Z,1478866318.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:58.978Z,1478866318.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:58.994Z,1478866318.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:59.381Z,1478866319.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:59.396Z,1478866319.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:11:59.787Z,1478866319.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:11:59.803Z,1478866319.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:00.192Z,1478866320.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:00.265Z,1478866320.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:00.588Z,1478866320.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:00.609Z,1478866320.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:00.992Z,1478866320.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:01.016Z,1478866321.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:01.380Z,1478866321.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:01.433Z,1478866321.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:01.777Z,1478866321.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:01.792Z,1478866321.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:02.179Z,1478866322.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:02.231Z,1478866322.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:02.576Z,1478866322.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:02.623Z,1478866322.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:02.989Z,1478866322.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:03.022Z,1478866323.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:03.392Z,1478866323.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:03.407Z,1478866323.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:03.787Z,1478866323.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:03.809Z,1478866323.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:04.170Z,1478866324.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:04.201Z,1478866324.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:04.569Z,1478866324.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:04.595Z,1478866324.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:04.970Z,1478866324.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:04.998Z,1478866324.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:05.370Z,1478866325.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:05.408Z,1478866325.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:05.791Z,1478866325.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:05.807Z,1478866325.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:06.191Z,1478866326.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:06.213Z,1478866326.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:06.600Z,1478866326.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:06.616Z,1478866326.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:06.969Z,1478866326.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:07.009Z,1478866327.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:07.369Z,1478866327.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:07.384Z,1478866327.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:07.770Z,1478866327.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:07.785Z,1478866327.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:08.174Z,1478866328.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:08.190Z,1478866328.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:08.581Z,1478866328.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:08.601Z,1478866328.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:08.986Z,1478866328.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:09.009Z,1478866329.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:09.388Z,1478866329.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:09.412Z,1478866329.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:09.786Z,1478866329.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:09.802Z,1478866329.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:10.174Z,1478866330.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:10.209Z,1478866330.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:10.569Z,1478866330.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:10.605Z,1478866330.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:10.974Z,1478866330.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:11.009Z,1478866331.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:11.374Z,1478866331.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:11.410Z,1478866331.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:11.780Z,1478866331.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:11.813Z,1478866331.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:12.195Z,1478866332.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:12.210Z,1478866332.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:12.595Z,1478866332.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:12.643Z,1478866332.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:12.973Z,1478866332.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:12.990Z,1478866332.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:13.373Z,1478866333.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:13.393Z,1478866333.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:13.777Z,1478866333.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:13.801Z,1478866333.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:14.178Z,1478866334.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:14.198Z,1478866334.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:14.579Z,1478866334.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:14.641Z,1478866334.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:17.984Z,1478866337.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:18.050Z,1478866338.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:18.184Z,1478866338.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:18.200Z,1478866338.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:18.533Z,1478866338.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:18.573Z,1478866338.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:18.924Z,1478866338.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:18.973Z,1478866338.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:19.324Z,1478866339.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:19.357Z,1478866339.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:19.729Z,1478866339.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:19.784Z,1478866339.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:20.129Z,1478866340.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:20.197Z,1478866340.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:20.536Z,1478866340.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:20.553Z,1478866340.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:20.943Z,1478866340.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:20.959Z,1478866340.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:21.344Z,1478866341.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:21.360Z,1478866341.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:21.743Z,1478866341.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:21.758Z,1478866341.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:22.121Z,1478866342.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:22.156Z,1478866342.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:22.530Z,1478866342.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:22.557Z,1478866342.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:22.921Z,1478866342.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:22.958Z,1478866342.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:23.321Z,1478866343.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:23.357Z,1478866343.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:23.745Z,1478866343.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:23.765Z,1478866343.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:24.144Z,1478866344.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:24.160Z,1478866344.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:24.549Z,1478866344.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:24.565Z,1478866344.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:24.926Z,1478866344.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:24.964Z,1478866344.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:25.321Z,1478866345.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:25.361Z,1478866345.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:25.721Z,1478866345.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:25.741Z,1478866345.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:26.122Z,1478866346.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:26.141Z,1478866346.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:26.542Z,1478866346.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:26.613Z,1478866346.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:26.941Z,1478866346.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:26.972Z,1478866346.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:27.336Z,1478866347.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:27.351Z,1478866347.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:27.734Z,1478866347.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:27.749Z,1478866347.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:28.133Z,1478866348.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:28.149Z,1478866348.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:28.529Z,1478866348.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:28.561Z,1478866348.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:28.925Z,1478866348.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:28.998Z,1478866348.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:29.323Z,1478866349.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:29.360Z,1478866349.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:29.734Z,1478866349.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:29.769Z,1478866349.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:30.147Z,1478866350.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:30.195Z,1478866350.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:30.540Z,1478866350.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:30.584Z,1478866350.584 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:30.584Z,1478866350.584 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 128
2016-11-11T12:12:30.584Z,1478866350.584 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:12:30.603Z,1478866350.603 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:30.610Z,1478866350.610 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 128
2016-11-11T12:12:30.610Z,1478866350.610 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:12:30.612Z,1478866350.612 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:30.612Z,1478866350.612 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 128
2016-11-11T12:12:30.612Z,1478866350.612 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:12:30.655Z,1478866350.655 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:12:30.655Z,1478866350.655 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:12:30.659Z,1478866350.659 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:12:30.946Z,1478866350.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:31.069Z,1478866351.069 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:12:31.069Z,1478866351.069 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 128
2016-11-11T12:12:31.070Z,1478866351.070 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:12:31.070Z,1478866351.070 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 128
2016-11-11T12:12:31.079Z,1478866351.079 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:12:31.079Z,1478866351.079 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 128
2016-11-11T12:12:31.322Z,1478866351.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:31.368Z,1478866351.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:12:31.369Z,1478866351.369 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:12:31.369Z,1478866351.369 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:12:31.383Z,1478866351.383 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:12:31.396Z,1478866351.395 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:12:31.396Z,1478866351.396 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:12:31.396Z,1478866351.396 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:12:31.397Z,1478866351.397 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:12:31.397Z,1478866351.397 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:12:31.751Z,1478866351.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:31.832Z,1478866351.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:32.125Z,1478866352.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:32.189Z,1478866352.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:32.527Z,1478866352.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:32.572Z,1478866352.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:32.942Z,1478866352.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:33.017Z,1478866353.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:33.346Z,1478866353.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:33.377Z,1478866353.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:33.734Z,1478866353.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:33.789Z,1478866353.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:34.127Z,1478866354.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:34.183Z,1478866354.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:34.522Z,1478866354.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:34.574Z,1478866354.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:34.928Z,1478866354.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:34.973Z,1478866354.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:35.327Z,1478866355.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:35.359Z,1478866355.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:35.740Z,1478866355.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:35.794Z,1478866355.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:36.146Z,1478866356.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:36.174Z,1478866356.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:36.532Z,1478866356.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:36.570Z,1478866356.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:36.927Z,1478866356.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:36.971Z,1478866356.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:37.325Z,1478866357.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:37.341Z,1478866357.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:37.732Z,1478866357.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:37.786Z,1478866357.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:38.127Z,1478866358.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:38.149Z,1478866358.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:38.541Z,1478866358.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:38.556Z,1478866358.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:38.944Z,1478866358.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:38.971Z,1478866358.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:39.367Z,1478866359.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:39.393Z,1478866359.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:39.739Z,1478866359.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:39.771Z,1478866359.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:40.121Z,1478866360.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:40.174Z,1478866360.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:40.535Z,1478866360.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:40.609Z,1478866360.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:40.929Z,1478866360.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:40.945Z,1478866360.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:41.321Z,1478866361.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:41.353Z,1478866361.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:41.753Z,1478866361.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:41.777Z,1478866361.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:42.148Z,1478866362.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:42.163Z,1478866362.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:42.548Z,1478866362.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:42.564Z,1478866362.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:42.930Z,1478866362.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:42.962Z,1478866362.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:43.341Z,1478866363.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:43.386Z,1478866363.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:43.723Z,1478866363.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:43.772Z,1478866363.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:44.133Z,1478866364.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:44.162Z,1478866364.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:44.532Z,1478866364.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:44.556Z,1478866364.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:44.942Z,1478866364.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:44.974Z,1478866364.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:45.338Z,1478866365.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:45.370Z,1478866365.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:45.738Z,1478866365.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:45.773Z,1478866365.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:46.127Z,1478866366.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:46.217Z,1478866366.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:46.524Z,1478866366.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:46.550Z,1478866366.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:46.924Z,1478866366.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:46.962Z,1478866366.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:47.323Z,1478866367.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:47.385Z,1478866367.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:47.738Z,1478866367.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:47.794Z,1478866367.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:48.139Z,1478866368.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:48.198Z,1478866368.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:48.537Z,1478866368.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:48.593Z,1478866368.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:48.927Z,1478866368.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:49.005Z,1478866369.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:49.323Z,1478866369.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:49.364Z,1478866369.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:49.721Z,1478866369.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:49.773Z,1478866369.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:50.131Z,1478866370.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:50.188Z,1478866370.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:50.522Z,1478866370.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:50.538Z,1478866370.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:50.934Z,1478866370.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:50.984Z,1478866370.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:51.338Z,1478866371.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:51.384Z,1478866371.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:51.734Z,1478866371.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:51.778Z,1478866371.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:52.127Z,1478866372.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:52.178Z,1478866372.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:52.531Z,1478866372.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:52.556Z,1478866372.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:52.925Z,1478866372.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:52.961Z,1478866372.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:53.323Z,1478866373.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:53.371Z,1478866373.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:53.737Z,1478866373.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:53.794Z,1478866373.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:54.140Z,1478866374.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:54.202Z,1478866374.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:54.538Z,1478866374.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:54.595Z,1478866374.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:54.933Z,1478866374.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:54.958Z,1478866374.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:55.332Z,1478866375.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:55.386Z,1478866375.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:55.733Z,1478866375.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:55.757Z,1478866375.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:56.125Z,1478866376.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:56.170Z,1478866376.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:56.528Z,1478866376.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:56.568Z,1478866376.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:56.934Z,1478866376.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:56.976Z,1478866376.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:57.347Z,1478866377.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:57.372Z,1478866377.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:57.734Z,1478866377.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:57.799Z,1478866377.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:58.132Z,1478866378.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:58.157Z,1478866378.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:58.523Z,1478866378.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:58.566Z,1478866378.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:58.922Z,1478866378.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:58.949Z,1478866378.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:59.337Z,1478866379.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:59.358Z,1478866379.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:12:59.744Z,1478866379.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:12:59.764Z,1478866379.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:00.144Z,1478866380.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:00.168Z,1478866380.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:00.551Z,1478866380.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:00.689Z,1478866380.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:00.929Z,1478866380.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:00.949Z,1478866380.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:01.324Z,1478866381.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:01.354Z,1478866381.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:01.728Z,1478866381.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:01.789Z,1478866381.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:02.130Z,1478866382.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:02.149Z,1478866382.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:02.535Z,1478866382.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:02.590Z,1478866382.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:02.938Z,1478866382.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:02.990Z,1478866382.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:03.338Z,1478866383.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:03.353Z,1478866383.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:03.739Z,1478866383.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:03.754Z,1478866383.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:04.121Z,1478866384.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:04.170Z,1478866384.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:04.538Z,1478866384.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:04.554Z,1478866384.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:04.922Z,1478866384.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:04.958Z,1478866384.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:05.321Z,1478866385.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:05.355Z,1478866385.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:05.732Z,1478866385.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:05.747Z,1478866385.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:06.144Z,1478866386.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:06.174Z,1478866386.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:06.540Z,1478866386.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:06.580Z,1478866386.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:06.924Z,1478866386.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:06.945Z,1478866386.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:07.328Z,1478866387.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:07.344Z,1478866387.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:07.728Z,1478866387.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:07.749Z,1478866387.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:08.130Z,1478866388.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:08.145Z,1478866388.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:08.529Z,1478866388.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:08.545Z,1478866388.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:08.942Z,1478866388.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:08.958Z,1478866388.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:09.344Z,1478866389.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:09.360Z,1478866389.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:09.732Z,1478866389.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:09.777Z,1478866389.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:10.121Z,1478866390.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:10.175Z,1478866390.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:10.526Z,1478866390.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:10.554Z,1478866390.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:10.930Z,1478866390.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:10.946Z,1478866390.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:11.327Z,1478866391.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:11.342Z,1478866391.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:11.740Z,1478866391.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:11.756Z,1478866391.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:12.146Z,1478866392.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:12.167Z,1478866392.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:12.536Z,1478866392.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:12.572Z,1478866392.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:12.922Z,1478866392.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:12.955Z,1478866392.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:13.321Z,1478866393.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:13.349Z,1478866393.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:13.722Z,1478866393.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:13.781Z,1478866393.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:14.122Z,1478866394.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:14.163Z,1478866394.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:14.521Z,1478866394.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:14.557Z,1478866394.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:14.932Z,1478866394.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:14.997Z,1478866394.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:18.414Z,1478866398.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:18.430Z,1478866398.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:18.537Z,1478866398.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:18.571Z,1478866398.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:18.912Z,1478866398.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:18.933Z,1478866398.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:19.301Z,1478866399.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:19.333Z,1478866399.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:19.702Z,1478866399.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:19.749Z,1478866399.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:20.102Z,1478866400.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:20.144Z,1478866400.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:20.502Z,1478866400.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:20.546Z,1478866400.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:20.912Z,1478866400.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:20.967Z,1478866400.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:21.315Z,1478866401.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:21.343Z,1478866401.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:21.737Z,1478866401.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:21.752Z,1478866401.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:22.113Z,1478866402.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:22.133Z,1478866402.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:22.507Z,1478866402.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:22.529Z,1478866402.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:22.911Z,1478866402.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:22.946Z,1478866402.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:23.310Z,1478866403.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:23.337Z,1478866403.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:23.712Z,1478866403.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:23.745Z,1478866403.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:24.116Z,1478866404.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:24.144Z,1478866404.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:24.512Z,1478866404.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:24.548Z,1478866404.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:24.906Z,1478866404.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:24.921Z,1478866404.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:25.313Z,1478866405.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:25.333Z,1478866405.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:25.704Z,1478866405.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:25.737Z,1478866405.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:26.109Z,1478866406.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:26.129Z,1478866406.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:26.514Z,1478866406.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:26.530Z,1478866406.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:26.919Z,1478866406.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:26.935Z,1478866406.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:27.331Z,1478866407.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:27.346Z,1478866407.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:27.724Z,1478866407.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:27.755Z,1478866407.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:28.109Z,1478866408.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:28.143Z,1478866408.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:28.518Z,1478866408.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:28.542Z,1478866408.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:28.919Z,1478866408.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:28.944Z,1478866408.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:29.310Z,1478866409.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:29.341Z,1478866409.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:29.712Z,1478866409.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:29.743Z,1478866409.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:30.124Z,1478866410.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:30.149Z,1478866410.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:30.528Z,1478866410.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:30.562Z,1478866410.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:30.910Z,1478866410.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:30.936Z,1478866410.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:31.309Z,1478866411.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:31.332Z,1478866411.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:31.704Z,1478866411.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:31.737Z,1478866411.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:32.102Z,1478866412.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:32.157Z,1478866412.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:32.511Z,1478866412.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:32.588Z,1478866412.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:32.912Z,1478866412.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:32.941Z,1478866412.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:33.316Z,1478866413.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:33.352Z,1478866413.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:33.717Z,1478866413.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:33.766Z,1478866413.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:34.102Z,1478866414.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:34.133Z,1478866414.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:34.502Z,1478866414.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:34.549Z,1478866414.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:34.903Z,1478866414.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:34.949Z,1478866414.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:35.302Z,1478866415.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:35.322Z,1478866415.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:35.712Z,1478866415.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:35.741Z,1478866415.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:36.137Z,1478866416.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:36.168Z,1478866416.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:36.513Z,1478866416.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:36.538Z,1478866416.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:36.913Z,1478866416.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:36.957Z,1478866416.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:37.305Z,1478866417.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:37.325Z,1478866417.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:37.705Z,1478866417.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:37.725Z,1478866417.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:38.108Z,1478866418.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:38.123Z,1478866418.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:38.518Z,1478866418.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:38.541Z,1478866418.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:38.919Z,1478866418.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:38.936Z,1478866418.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:39.323Z,1478866419.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:39.338Z,1478866419.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:39.725Z,1478866419.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:39.745Z,1478866419.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:40.106Z,1478866420.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:40.141Z,1478866420.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:40.501Z,1478866420.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:40.541Z,1478866420.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:40.902Z,1478866420.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:40.917Z,1478866420.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:41.310Z,1478866421.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:41.325Z,1478866421.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:41.716Z,1478866421.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:41.748Z,1478866421.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:42.116Z,1478866422.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:42.154Z,1478866422.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:42.515Z,1478866422.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:42.538Z,1478866422.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:42.901Z,1478866422.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:42.937Z,1478866422.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:43.302Z,1478866423.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:43.334Z,1478866423.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:43.701Z,1478866423.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:43.733Z,1478866423.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:44.102Z,1478866424.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:44.140Z,1478866424.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:44.502Z,1478866424.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:44.538Z,1478866424.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:44.912Z,1478866424.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:44.938Z,1478866424.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:45.320Z,1478866425.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:45.343Z,1478866425.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:45.728Z,1478866425.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:45.786Z,1478866425.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:46.105Z,1478866426.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:46.130Z,1478866426.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:46.513Z,1478866426.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:46.533Z,1478866426.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:46.916Z,1478866426.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:46.931Z,1478866426.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:47.304Z,1478866427.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:47.357Z,1478866427.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:47.719Z,1478866427.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:47.741Z,1478866427.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:48.123Z,1478866428.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:48.174Z,1478866428.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:48.527Z,1478866428.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:48.543Z,1478866428.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:48.905Z,1478866428.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:48.953Z,1478866428.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:49.302Z,1478866429.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:49.349Z,1478866429.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:49.702Z,1478866429.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:49.737Z,1478866429.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:50.108Z,1478866430.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:50.140Z,1478866430.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:50.513Z,1478866430.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:50.544Z,1478866430.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:50.912Z,1478866430.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:50.942Z,1478866430.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:51.316Z,1478866431.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:51.343Z,1478866431.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:51.716Z,1478866431.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:51.749Z,1478866431.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:52.105Z,1478866432.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:52.141Z,1478866432.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:52.505Z,1478866432.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:52.520Z,1478866432.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:52.903Z,1478866432.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:52.918Z,1478866432.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:53.309Z,1478866433.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:53.329Z,1478866433.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:53.712Z,1478866433.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:53.733Z,1478866433.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:54.116Z,1478866434.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:54.132Z,1478866434.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:54.518Z,1478866434.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:54.537Z,1478866434.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:54.908Z,1478866434.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:54.929Z,1478866434.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:55.310Z,1478866435.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:55.337Z,1478866435.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:55.701Z,1478866435.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:55.721Z,1478866435.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:56.107Z,1478866436.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:56.122Z,1478866436.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:56.513Z,1478866436.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:56.533Z,1478866436.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:56.918Z,1478866436.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:56.938Z,1478866436.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:57.318Z,1478866437.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:57.342Z,1478866437.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:57.724Z,1478866437.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:57.739Z,1478866437.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:58.106Z,1478866438.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:58.132Z,1478866438.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:58.510Z,1478866438.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:58.541Z,1478866438.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:58.902Z,1478866438.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:58.949Z,1478866438.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:59.305Z,1478866439.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:59.325Z,1478866439.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:13:59.720Z,1478866439.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:13:59.752Z,1478866439.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:00.122Z,1478866440.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:00.209Z,1478866440.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:00.513Z,1478866440.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:00.537Z,1478866440.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:00.905Z,1478866440.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:00.929Z,1478866440.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:01.310Z,1478866441.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:01.346Z,1478866441.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:01.706Z,1478866441.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:01.731Z,1478866441.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:02.102Z,1478866442.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:02.129Z,1478866442.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:02.501Z,1478866442.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:02.550Z,1478866442.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:02.927Z,1478866442.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:02.943Z,1478866442.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:03.328Z,1478866443.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:03.376Z,1478866443.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:03.725Z,1478866443.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:03.782Z,1478866443.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:04.101Z,1478866444.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:04.137Z,1478866444.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:04.514Z,1478866444.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:04.540Z,1478866444.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:04.911Z,1478866444.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:04.943Z,1478866444.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:05.302Z,1478866445.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:05.317Z,1478866445.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:05.712Z,1478866445.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:05.740Z,1478866445.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:06.120Z,1478866446.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:06.147Z,1478866446.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:06.514Z,1478866446.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:06.530Z,1478866446.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:06.909Z,1478866446.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:06.929Z,1478866446.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:07.311Z,1478866447.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:07.326Z,1478866447.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:07.702Z,1478866447.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:07.733Z,1478866447.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:08.115Z,1478866448.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:08.131Z,1478866448.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:08.501Z,1478866448.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:08.538Z,1478866448.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:08.915Z,1478866448.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:08.943Z,1478866448.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:09.327Z,1478866449.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:09.342Z,1478866449.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:09.724Z,1478866449.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:09.750Z,1478866449.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:10.102Z,1478866450.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:10.130Z,1478866450.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:10.510Z,1478866450.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:10.546Z,1478866450.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:10.903Z,1478866450.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:10.944Z,1478866450.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:11.306Z,1478866451.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:11.341Z,1478866451.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:11.725Z,1478866451.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:11.753Z,1478866451.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:12.120Z,1478866452.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:12.157Z,1478866452.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:12.512Z,1478866452.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:12.538Z,1478866452.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:12.905Z,1478866452.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:12.928Z,1478866452.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:13.302Z,1478866453.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:13.329Z,1478866453.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:13.706Z,1478866453.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:13.743Z,1478866453.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:14.102Z,1478866454.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:14.134Z,1478866454.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:14.144Z,1478866454.144 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T12:09:14.1Z
2016-11-11T12:14:14.144Z,1478866454.144 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T12:14:14.144Z,1478866454.144 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T12:14:14.501Z,1478866454.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:14.571Z,1478866454.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:15.357Z,1478866455.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:15.413Z,1478866455.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:15.527Z,1478866455.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:15.555Z,1478866455.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:19.042Z,1478866459.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:19.086Z,1478866459.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:19.147Z,1478866459.147 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0172.lzma
2016-11-11T12:14:19.193Z,1478866459.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:19.229Z,1478866459.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:19.552Z,1478866459.552 [NAL9602](INFO): Powering down
2016-11-11T12:14:19.582Z,1478866459.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:19.613Z,1478866459.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:19.949Z,1478866459.949 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0172.lzma.bak
2016-11-11T12:14:19.949Z,1478866459.949 [DataOverHttps](INFO): SBD MOMSN=4555393
2016-11-11T12:14:19.976Z,1478866459.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:20.022Z,1478866460.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:21.365Z,1478866461.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:21.412Z,1478866461.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:21.530Z,1478866461.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:21.582Z,1478866461.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:24.940Z,1478866464.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:25.002Z,1478866465.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:25.101Z,1478866465.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:25.117Z,1478866465.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:25.483Z,1478866465.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:25.499Z,1478866465.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:25.874Z,1478866465.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:25.905Z,1478866465.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:26.287Z,1478866466.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:26.332Z,1478866466.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:26.675Z,1478866466.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:26.711Z,1478866466.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:30.212Z,1478866470.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:30.269Z,1478866470.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:30.371Z,1478866470.371 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0173.lzma
2016-11-11T12:14:30.401Z,1478866470.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:30.432Z,1478866470.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:30.781Z,1478866470.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:30.802Z,1478866470.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:51.247Z,1478866491.247 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0173.lzma.bak
2016-11-11T12:14:51.247Z,1478866491.247 [DataOverHttps](INFO): SBD MOMSN=4555395
2016-11-11T12:14:51.282Z,1478866491.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:51.293Z,1478866491.293 [BPC1](ERROR): Failed to receive battery data
2016-11-11T12:14:51.294Z,1478866491.293 [BPC1] Communications Fault, FailCount= 1
2016-11-11T12:14:51.294Z,1478866491.294 [BPC1](ERROR): Communications Fault
2016-11-11T12:14:51.319Z,1478866491.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:51.368Z,1478866491.368 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T12:14:52.991Z,1478866492.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:53.030Z,1478866493.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:53.046Z,1478866493.046 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T12:14:53.047Z,1478866493.046 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T12:14:53.047Z,1478866493.047 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T12:14:53.111Z,1478866493.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:53.149Z,1478866493.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:56.601Z,1478866496.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:56.617Z,1478866496.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:56.664Z,1478866496.664 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:14:56.664Z,1478866496.664 [BPC1] No Fault, FailCount= 1
2016-11-11T12:14:56.744Z,1478866496.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:56.825Z,1478866496.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:57.109Z,1478866497.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:57.150Z,1478866497.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:57.506Z,1478866497.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:57.521Z,1478866497.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:57.902Z,1478866497.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:57.932Z,1478866497.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:58.317Z,1478866498.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:58.345Z,1478866498.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:58.701Z,1478866498.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:58.737Z,1478866498.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:59.097Z,1478866499.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:59.133Z,1478866499.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:59.497Z,1478866499.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:59.513Z,1478866499.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:14:59.897Z,1478866499.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:14:59.913Z,1478866499.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:00.323Z,1478866500.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:00.361Z,1478866500.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:00.710Z,1478866500.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:00.747Z,1478866500.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:01.105Z,1478866501.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:01.120Z,1478866501.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:01.505Z,1478866501.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:01.521Z,1478866501.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:01.904Z,1478866501.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:01.925Z,1478866501.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:02.310Z,1478866502.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:02.326Z,1478866502.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:02.698Z,1478866502.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:02.737Z,1478866502.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:03.097Z,1478866503.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:03.129Z,1478866503.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:03.508Z,1478866503.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:03.530Z,1478866503.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:03.897Z,1478866503.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:03.930Z,1478866503.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:04.297Z,1478866504.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:04.331Z,1478866504.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:04.697Z,1478866504.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:04.723Z,1478866504.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:05.108Z,1478866505.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:05.136Z,1478866505.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:05.497Z,1478866505.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:05.533Z,1478866505.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:05.897Z,1478866505.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:05.930Z,1478866505.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:06.305Z,1478866506.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:06.331Z,1478866506.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:06.697Z,1478866506.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:06.735Z,1478866506.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:07.101Z,1478866507.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:07.133Z,1478866507.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:07.497Z,1478866507.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:07.534Z,1478866507.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:07.901Z,1478866507.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:07.937Z,1478866507.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:08.305Z,1478866508.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:08.365Z,1478866508.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:08.698Z,1478866508.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:08.714Z,1478866508.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:09.103Z,1478866509.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:09.161Z,1478866509.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:09.504Z,1478866509.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:09.520Z,1478866509.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:09.904Z,1478866509.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:10.002Z,1478866510.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:10.310Z,1478866510.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:10.325Z,1478866510.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:10.704Z,1478866510.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:10.760Z,1478866510.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:11.104Z,1478866511.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:11.157Z,1478866511.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:11.504Z,1478866511.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:11.522Z,1478866511.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:11.904Z,1478866511.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:11.926Z,1478866511.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:12.313Z,1478866512.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:12.329Z,1478866512.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:12.705Z,1478866512.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:12.720Z,1478866512.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:13.097Z,1478866513.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:13.131Z,1478866513.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:13.497Z,1478866513.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:13.571Z,1478866513.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:13.897Z,1478866513.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:13.931Z,1478866513.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:14.307Z,1478866514.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:14.347Z,1478866514.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:14.709Z,1478866514.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:14.725Z,1478866514.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:15.104Z,1478866515.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:15.119Z,1478866515.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:15.506Z,1478866515.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:15.521Z,1478866515.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:15.904Z,1478866515.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:15.920Z,1478866515.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:16.307Z,1478866516.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:16.322Z,1478866516.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:16.697Z,1478866516.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:16.735Z,1478866516.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:17.112Z,1478866517.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:17.128Z,1478866517.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:17.497Z,1478866517.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:17.529Z,1478866517.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:17.897Z,1478866517.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:17.922Z,1478866517.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:18.301Z,1478866518.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:18.333Z,1478866518.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:18.771Z,1478866518.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:18.786Z,1478866518.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:19.101Z,1478866519.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:19.133Z,1478866519.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:19.497Z,1478866519.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:19.529Z,1478866519.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:19.897Z,1478866519.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:19.917Z,1478866519.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:20.304Z,1478866520.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:20.325Z,1478866520.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:20.709Z,1478866520.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:20.724Z,1478866520.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:21.105Z,1478866521.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:21.132Z,1478866521.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:21.505Z,1478866521.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:21.532Z,1478866521.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:21.897Z,1478866521.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:21.949Z,1478866521.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:22.313Z,1478866522.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:22.351Z,1478866522.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:22.697Z,1478866522.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:22.729Z,1478866522.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:23.097Z,1478866523.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:23.161Z,1478866523.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:23.497Z,1478866523.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:23.532Z,1478866523.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:23.897Z,1478866523.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:23.953Z,1478866523.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:24.305Z,1478866524.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:24.337Z,1478866524.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:24.697Z,1478866524.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:24.749Z,1478866524.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:25.098Z,1478866525.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:25.150Z,1478866525.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:25.497Z,1478866525.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:25.537Z,1478866525.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:25.897Z,1478866525.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:25.940Z,1478866525.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:26.305Z,1478866526.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:26.341Z,1478866526.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:26.697Z,1478866526.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:26.712Z,1478866526.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:27.100Z,1478866527.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:27.121Z,1478866527.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:27.500Z,1478866527.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:27.515Z,1478866527.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:27.900Z,1478866527.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:27.916Z,1478866527.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:28.305Z,1478866528.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:28.325Z,1478866528.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:28.706Z,1478866528.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:28.724Z,1478866528.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:29.104Z,1478866529.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:29.119Z,1478866529.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:29.504Z,1478866529.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:29.525Z,1478866529.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:29.904Z,1478866529.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:29.919Z,1478866529.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:30.308Z,1478866530.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:30.324Z,1478866530.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:30.697Z,1478866530.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:30.729Z,1478866530.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:31.097Z,1478866531.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:31.122Z,1478866531.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:31.504Z,1478866531.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:31.527Z,1478866531.527 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:31.527Z,1478866531.527 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 129
2016-11-11T12:15:31.527Z,1478866531.527 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:15:31.534Z,1478866531.534 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:31.534Z,1478866531.534 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 129
2016-11-11T12:15:31.534Z,1478866531.534 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:15:31.536Z,1478866531.536 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:31.536Z,1478866531.536 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 129
2016-11-11T12:15:31.536Z,1478866531.536 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:15:31.563Z,1478866531.563 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:15:31.567Z,1478866531.567 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:15:31.567Z,1478866531.568 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:15:31.897Z,1478866531.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:31.946Z,1478866531.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:15:31.947Z,1478866531.947 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 129
2016-11-11T12:15:31.947Z,1478866531.947 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:15:31.947Z,1478866531.947 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 129
2016-11-11T12:15:31.948Z,1478866531.948 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:15:31.948Z,1478866531.948 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 129
2016-11-11T12:15:32.297Z,1478866532.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:32.331Z,1478866532.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:15:32.331Z,1478866532.331 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:15:32.332Z,1478866532.332 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:15:32.336Z,1478866532.336 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:15:32.337Z,1478866532.337 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:15:32.337Z,1478866532.337 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:15:32.338Z,1478866532.338 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:15:32.338Z,1478866532.338 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:15:32.338Z,1478866532.339 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:15:32.705Z,1478866532.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:32.730Z,1478866532.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:33.097Z,1478866533.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:33.137Z,1478866533.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:33.502Z,1478866533.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:33.517Z,1478866533.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:33.905Z,1478866533.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:33.920Z,1478866533.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:34.306Z,1478866534.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:34.322Z,1478866534.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:34.705Z,1478866534.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:34.720Z,1478866534.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:35.100Z,1478866535.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:35.130Z,1478866535.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:35.504Z,1478866535.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:35.519Z,1478866535.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:35.900Z,1478866535.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:35.922Z,1478866535.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:36.300Z,1478866536.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:36.331Z,1478866536.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:36.712Z,1478866536.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:36.733Z,1478866536.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:37.097Z,1478866537.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:37.131Z,1478866537.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:37.504Z,1478866537.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:37.549Z,1478866537.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:37.897Z,1478866537.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:37.934Z,1478866537.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:38.297Z,1478866538.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:38.329Z,1478866538.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:38.697Z,1478866538.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:38.729Z,1478866538.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:39.097Z,1478866539.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:39.129Z,1478866539.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:39.497Z,1478866539.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:39.529Z,1478866539.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:39.897Z,1478866539.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:39.929Z,1478866539.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:40.312Z,1478866540.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:40.321Z,1478866540.321 [BPC1](ERROR): Failed to receive battery data
2016-11-11T12:15:40.321Z,1478866540.321 [BPC1] Communications Fault, FailCount= 1
2016-11-11T12:15:40.321Z,1478866540.321 [BPC1](ERROR): Communications Fault
2016-11-11T12:15:40.337Z,1478866540.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:40.374Z,1478866540.374 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T12:15:40.697Z,1478866540.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:40.724Z,1478866540.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:41.100Z,1478866541.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:41.133Z,1478866541.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:41.497Z,1478866541.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:41.533Z,1478866541.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:41.552Z,1478866541.552 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:15:41.552Z,1478866541.552 [BPC1] No Fault, FailCount= 1
2016-11-11T12:15:41.897Z,1478866541.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:41.974Z,1478866541.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:42.312Z,1478866542.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:42.376Z,1478866542.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:42.697Z,1478866542.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:42.737Z,1478866542.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:43.097Z,1478866543.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:43.140Z,1478866543.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:43.497Z,1478866543.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:43.533Z,1478866543.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:43.897Z,1478866543.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:43.917Z,1478866543.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:44.297Z,1478866544.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:44.317Z,1478866544.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:44.708Z,1478866544.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:44.729Z,1478866544.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:45.100Z,1478866545.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:45.133Z,1478866545.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:45.505Z,1478866545.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:45.520Z,1478866545.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:45.909Z,1478866545.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:45.924Z,1478866545.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:46.304Z,1478866546.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:46.325Z,1478866546.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:46.700Z,1478866546.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:46.731Z,1478866546.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:47.097Z,1478866547.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:47.123Z,1478866547.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:47.512Z,1478866547.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:47.527Z,1478866547.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:47.898Z,1478866547.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:47.943Z,1478866547.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:48.298Z,1478866548.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:48.333Z,1478866548.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:48.697Z,1478866548.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:48.729Z,1478866548.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:49.098Z,1478866549.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:49.145Z,1478866549.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:49.497Z,1478866549.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:49.538Z,1478866549.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:49.897Z,1478866549.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:49.933Z,1478866549.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:50.297Z,1478866550.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:50.337Z,1478866550.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:50.701Z,1478866550.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:50.733Z,1478866550.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:51.097Z,1478866551.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:51.118Z,1478866551.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:51.497Z,1478866551.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:51.517Z,1478866551.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:51.905Z,1478866551.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:51.920Z,1478866551.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:52.309Z,1478866552.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:52.324Z,1478866552.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:52.704Z,1478866552.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:52.725Z,1478866552.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:53.104Z,1478866553.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:53.120Z,1478866553.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:53.509Z,1478866553.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:53.524Z,1478866553.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:56.933Z,1478866556.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:57.017Z,1478866557.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:57.127Z,1478866557.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:57.175Z,1478866557.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:57.489Z,1478866557.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:57.532Z,1478866557.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:57.552Z,1478866557.552 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T12:15:57.889Z,1478866557.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:57.932Z,1478866557.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:58.289Z,1478866558.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:58.341Z,1478866558.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:58.689Z,1478866558.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:58.733Z,1478866558.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:59.089Z,1478866559.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:59.134Z,1478866559.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:59.489Z,1478866559.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:59.537Z,1478866559.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:15:59.893Z,1478866559.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:15:59.913Z,1478866559.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:00.295Z,1478866560.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:00.310Z,1478866560.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:00.695Z,1478866560.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:00.711Z,1478866560.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:01.092Z,1478866561.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:01.125Z,1478866561.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:01.496Z,1478866561.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:01.517Z,1478866561.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:01.896Z,1478866561.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:01.911Z,1478866561.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:02.296Z,1478866562.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:02.311Z,1478866562.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:02.696Z,1478866562.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:02.711Z,1478866562.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:03.096Z,1478866563.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:03.111Z,1478866563.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:03.496Z,1478866563.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:03.511Z,1478866563.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:03.896Z,1478866563.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:03.911Z,1478866563.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:04.303Z,1478866564.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:04.319Z,1478866564.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:04.697Z,1478866564.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:04.717Z,1478866564.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:05.089Z,1478866565.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:05.129Z,1478866565.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:05.489Z,1478866565.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:05.521Z,1478866565.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:05.889Z,1478866565.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:05.923Z,1478866565.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:06.289Z,1478866566.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:06.322Z,1478866566.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:06.689Z,1478866566.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:06.725Z,1478866566.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:07.089Z,1478866567.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:07.121Z,1478866567.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:07.493Z,1478866567.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:07.518Z,1478866567.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:07.893Z,1478866567.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:07.919Z,1478866567.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:08.297Z,1478866568.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:08.322Z,1478866568.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:08.689Z,1478866568.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:08.721Z,1478866568.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:09.093Z,1478866569.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:09.119Z,1478866569.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:09.489Z,1478866569.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:09.521Z,1478866569.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:09.889Z,1478866569.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:09.925Z,1478866569.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:10.297Z,1478866570.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:10.329Z,1478866570.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:10.693Z,1478866570.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:10.720Z,1478866570.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:11.089Z,1478866571.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:11.109Z,1478866571.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:11.493Z,1478866571.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:11.545Z,1478866571.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:11.896Z,1478866571.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:11.961Z,1478866571.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:12.292Z,1478866572.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:12.308Z,1478866572.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:12.701Z,1478866572.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:12.716Z,1478866572.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:13.095Z,1478866573.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:13.142Z,1478866573.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:13.496Z,1478866573.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:13.517Z,1478866573.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:13.896Z,1478866573.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:13.952Z,1478866573.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:14.296Z,1478866574.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:14.351Z,1478866574.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:14.704Z,1478866574.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:14.720Z,1478866574.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:15.096Z,1478866575.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:15.112Z,1478866575.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:15.489Z,1478866575.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:15.522Z,1478866575.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:15.889Z,1478866575.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:15.923Z,1478866575.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:16.289Z,1478866576.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:16.315Z,1478866576.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:16.696Z,1478866576.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:16.719Z,1478866576.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:17.089Z,1478866577.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:17.123Z,1478866577.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:17.496Z,1478866577.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:17.519Z,1478866577.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:17.889Z,1478866577.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:17.923Z,1478866577.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:18.289Z,1478866578.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:18.330Z,1478866578.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:18.689Z,1478866578.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:18.721Z,1478866578.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:19.089Z,1478866579.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:19.122Z,1478866579.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:19.489Z,1478866579.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:19.522Z,1478866579.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:19.896Z,1478866579.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:19.919Z,1478866579.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:20.289Z,1478866580.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:20.314Z,1478866580.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:20.689Z,1478866580.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:20.723Z,1478866580.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:21.109Z,1478866581.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:21.132Z,1478866581.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:21.489Z,1478866581.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:21.546Z,1478866581.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:21.889Z,1478866581.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:21.921Z,1478866581.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:22.293Z,1478866582.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:22.319Z,1478866582.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:22.689Z,1478866582.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:22.720Z,1478866582.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:23.093Z,1478866583.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:23.125Z,1478866583.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:23.489Z,1478866583.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:23.525Z,1478866583.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:23.889Z,1478866583.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:23.924Z,1478866583.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:24.289Z,1478866584.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:24.326Z,1478866584.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:24.697Z,1478866584.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:24.724Z,1478866584.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:25.089Z,1478866585.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:25.125Z,1478866585.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:25.494Z,1478866585.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:25.530Z,1478866585.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:25.889Z,1478866585.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:25.905Z,1478866585.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:26.294Z,1478866586.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:26.365Z,1478866586.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:26.689Z,1478866586.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:26.705Z,1478866586.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:27.089Z,1478866587.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:27.106Z,1478866587.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:27.489Z,1478866587.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:27.551Z,1478866587.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:27.889Z,1478866587.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:27.905Z,1478866587.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:28.292Z,1478866588.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:28.341Z,1478866588.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:28.697Z,1478866588.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:28.744Z,1478866588.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:29.093Z,1478866589.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:29.113Z,1478866589.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:29.495Z,1478866589.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:29.514Z,1478866589.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:29.891Z,1478866589.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:29.923Z,1478866589.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:30.289Z,1478866590.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:30.325Z,1478866590.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:30.689Z,1478866590.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:30.720Z,1478866590.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:31.089Z,1478866591.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:31.132Z,1478866591.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:31.489Z,1478866591.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:31.533Z,1478866591.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:31.889Z,1478866591.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:31.904Z,1478866591.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:32.301Z,1478866592.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:32.316Z,1478866592.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:32.696Z,1478866592.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:32.711Z,1478866592.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:33.096Z,1478866593.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:33.112Z,1478866593.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:33.496Z,1478866593.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:33.517Z,1478866593.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:33.896Z,1478866593.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:33.911Z,1478866593.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:34.289Z,1478866594.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:34.325Z,1478866594.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:34.693Z,1478866594.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:34.725Z,1478866594.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:35.089Z,1478866595.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:35.124Z,1478866595.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:35.489Z,1478866595.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:35.525Z,1478866595.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:35.889Z,1478866595.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:35.925Z,1478866595.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:36.300Z,1478866596.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:36.336Z,1478866596.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:36.695Z,1478866596.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:36.710Z,1478866596.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:37.089Z,1478866597.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:37.117Z,1478866597.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:37.496Z,1478866597.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:37.517Z,1478866597.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:37.896Z,1478866597.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:37.912Z,1478866597.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:38.303Z,1478866598.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:38.319Z,1478866598.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:38.692Z,1478866598.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:38.717Z,1478866598.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:39.089Z,1478866599.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:39.114Z,1478866599.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:39.504Z,1478866599.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:39.520Z,1478866599.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:39.889Z,1478866599.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:39.921Z,1478866599.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:40.289Z,1478866600.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:40.316Z,1478866600.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:40.689Z,1478866600.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:40.749Z,1478866600.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:41.089Z,1478866601.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:41.145Z,1478866601.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:41.495Z,1478866601.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:41.511Z,1478866601.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:41.900Z,1478866601.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:41.953Z,1478866601.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:42.296Z,1478866602.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:42.317Z,1478866602.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:42.696Z,1478866602.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:42.752Z,1478866602.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:43.096Z,1478866603.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:43.134Z,1478866603.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:43.497Z,1478866603.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:43.517Z,1478866603.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:43.889Z,1478866603.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:43.924Z,1478866603.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:44.297Z,1478866604.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:44.333Z,1478866604.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:44.692Z,1478866604.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:44.713Z,1478866604.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:45.092Z,1478866605.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:45.108Z,1478866605.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:45.495Z,1478866605.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:45.510Z,1478866605.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:45.896Z,1478866605.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:45.911Z,1478866605.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:46.289Z,1478866606.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:46.322Z,1478866606.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:46.693Z,1478866606.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:46.725Z,1478866606.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:47.089Z,1478866607.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:47.112Z,1478866607.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:47.489Z,1478866607.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:47.525Z,1478866607.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:47.893Z,1478866607.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:47.925Z,1478866607.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:48.289Z,1478866608.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:48.309Z,1478866608.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:48.692Z,1478866608.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:48.708Z,1478866608.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:49.097Z,1478866609.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:49.112Z,1478866609.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:49.496Z,1478866609.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:49.511Z,1478866609.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:49.896Z,1478866609.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:49.912Z,1478866609.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:50.297Z,1478866610.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:50.329Z,1478866610.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:50.689Z,1478866610.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:50.731Z,1478866610.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:51.089Z,1478866611.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:51.121Z,1478866611.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:51.489Z,1478866611.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:51.521Z,1478866611.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:51.889Z,1478866611.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:51.921Z,1478866611.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:52.289Z,1478866612.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:52.321Z,1478866612.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:52.693Z,1478866612.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:52.719Z,1478866612.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:53.089Z,1478866613.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:53.125Z,1478866613.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:53.489Z,1478866613.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:53.525Z,1478866613.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:53.897Z,1478866613.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:53.917Z,1478866613.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:57.403Z,1478866617.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:57.454Z,1478866617.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:57.551Z,1478866617.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:57.593Z,1478866617.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:57.925Z,1478866617.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:57.982Z,1478866617.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:58.325Z,1478866618.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:58.333Z,1478866618.333 [BPC1](ERROR): Failed to receive battery data
2016-11-11T12:16:58.333Z,1478866618.333 [BPC1] Communications Fault, FailCount= 1
2016-11-11T12:16:58.333Z,1478866618.333 [BPC1](ERROR): Communications Fault
2016-11-11T12:16:58.358Z,1478866618.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:58.398Z,1478866618.398 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T12:16:58.733Z,1478866618.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:58.748Z,1478866618.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:59.128Z,1478866619.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:59.149Z,1478866619.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:59.532Z,1478866619.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:16:59.547Z,1478866619.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:16:59.603Z,1478866619.603 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:16:59.603Z,1478866619.603 [BPC1] No Fault, FailCount= 1
2016-11-11T12:16:59.937Z,1478866619.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:00.093Z,1478866620.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:00.332Z,1478866620.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:00.354Z,1478866620.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:00.733Z,1478866620.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:00.753Z,1478866620.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:01.125Z,1478866621.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:01.155Z,1478866621.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:01.525Z,1478866621.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:01.558Z,1478866621.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:01.925Z,1478866621.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:02.020Z,1478866622.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:02.329Z,1478866622.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:02.369Z,1478866622.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:02.725Z,1478866622.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:02.766Z,1478866622.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:03.132Z,1478866623.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:03.155Z,1478866623.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:03.529Z,1478866623.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:03.549Z,1478866623.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:03.937Z,1478866623.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:04.030Z,1478866624.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:04.334Z,1478866624.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:04.353Z,1478866624.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:04.736Z,1478866624.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:04.752Z,1478866624.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:05.137Z,1478866625.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:05.152Z,1478866625.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:05.533Z,1478866625.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:05.557Z,1478866625.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:05.925Z,1478866625.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:05.961Z,1478866625.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:06.334Z,1478866626.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:06.350Z,1478866626.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:06.729Z,1478866626.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:06.749Z,1478866626.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:07.132Z,1478866627.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:07.149Z,1478866627.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:07.532Z,1478866627.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:07.557Z,1478866627.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:07.933Z,1478866627.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:07.948Z,1478866627.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:08.332Z,1478866628.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:08.366Z,1478866628.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:08.725Z,1478866628.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:08.766Z,1478866628.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:09.125Z,1478866629.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:09.164Z,1478866629.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:09.525Z,1478866629.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:09.570Z,1478866629.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:09.925Z,1478866629.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:09.962Z,1478866629.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:10.332Z,1478866630.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:10.370Z,1478866630.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:10.732Z,1478866630.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:10.758Z,1478866630.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:11.136Z,1478866631.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:11.172Z,1478866631.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:11.525Z,1478866631.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:11.552Z,1478866631.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:11.959Z,1478866631.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:12.036Z,1478866632.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:12.325Z,1478866632.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:12.361Z,1478866632.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:12.725Z,1478866632.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:12.758Z,1478866632.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:13.133Z,1478866633.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:13.163Z,1478866633.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:13.529Z,1478866633.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:13.569Z,1478866633.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:13.979Z,1478866633.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:14.020Z,1478866634.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:14.330Z,1478866634.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:14.377Z,1478866634.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:14.732Z,1478866634.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:14.751Z,1478866634.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:15.131Z,1478866635.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:15.154Z,1478866635.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:15.534Z,1478866635.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:15.550Z,1478866635.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:15.987Z,1478866635.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:16.018Z,1478866636.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:16.328Z,1478866636.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:16.380Z,1478866636.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:16.728Z,1478866636.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:16.762Z,1478866636.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:17.127Z,1478866637.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:17.178Z,1478866637.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:17.525Z,1478866637.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:17.581Z,1478866637.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:17.981Z,1478866637.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:18.036Z,1478866638.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:18.330Z,1478866638.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:18.364Z,1478866638.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:18.727Z,1478866638.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:18.772Z,1478866638.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:19.125Z,1478866639.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:19.168Z,1478866639.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:19.525Z,1478866639.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:19.572Z,1478866639.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:19.925Z,1478866639.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:19.943Z,1478866639.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:20.340Z,1478866640.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:20.368Z,1478866640.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:20.732Z,1478866640.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:20.777Z,1478866640.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:21.128Z,1478866641.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:21.153Z,1478866641.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:21.536Z,1478866641.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:21.551Z,1478866641.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:21.934Z,1478866641.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:21.953Z,1478866641.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:22.333Z,1478866642.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:22.359Z,1478866642.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:22.725Z,1478866642.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:22.752Z,1478866642.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:23.126Z,1478866643.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:23.164Z,1478866643.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:23.527Z,1478866643.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:23.565Z,1478866643.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:23.925Z,1478866643.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:23.969Z,1478866643.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:24.325Z,1478866644.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:24.344Z,1478866644.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:24.735Z,1478866644.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:24.751Z,1478866644.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:25.135Z,1478866645.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:25.151Z,1478866645.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:25.532Z,1478866645.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:25.565Z,1478866645.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:25.947Z,1478866645.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:25.971Z,1478866645.971 [PNI_TCM](ERROR): CRC does not match. Expected:0x51298 got:0x1821
2016-11-11T12:17:26.002Z,1478866646.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:26.327Z,1478866646.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:26.355Z,1478866646.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:26.727Z,1478866646.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:26.743Z,1478866646.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:27.125Z,1478866647.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:27.169Z,1478866647.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:27.526Z,1478866647.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:27.544Z,1478866647.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:27.969Z,1478866647.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:28.041Z,1478866648.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:28.333Z,1478866648.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:28.353Z,1478866648.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:28.728Z,1478866648.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:28.770Z,1478866648.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:29.139Z,1478866649.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:29.145Z,1478866649.145 [PNI_TCM](ERROR): CRC does not match. Expected:0x50089 got:0x28955
2016-11-11T12:17:29.177Z,1478866649.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:29.531Z,1478866649.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:29.597Z,1478866649.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:29.950Z,1478866649.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:29.994Z,1478866649.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:30.339Z,1478866650.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:30.355Z,1478866650.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:30.735Z,1478866650.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:30.789Z,1478866650.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:31.135Z,1478866651.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:31.150Z,1478866651.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:31.536Z,1478866651.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:31.588Z,1478866651.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:31.956Z,1478866651.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:32.014Z,1478866652.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:32.327Z,1478866652.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:32.363Z,1478866652.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:32.731Z,1478866652.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:32.766Z,1478866652.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:33.125Z,1478866653.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:33.161Z,1478866653.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:33.529Z,1478866653.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:33.571Z,1478866653.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:33.929Z,1478866653.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:33.969Z,1478866653.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:34.336Z,1478866654.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:34.382Z,1478866654.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:34.732Z,1478866654.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:34.757Z,1478866654.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:35.129Z,1478866655.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:35.169Z,1478866655.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:35.530Z,1478866655.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:35.583Z,1478866655.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:35.928Z,1478866655.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:35.980Z,1478866655.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:36.331Z,1478866656.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:36.415Z,1478866656.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:36.732Z,1478866656.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:36.815Z,1478866656.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:37.137Z,1478866657.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:37.192Z,1478866657.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:37.540Z,1478866657.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:37.608Z,1478866657.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:37.927Z,1478866657.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:37.977Z,1478866657.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:38.336Z,1478866658.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:38.442Z,1478866658.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:38.730Z,1478866658.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:38.782Z,1478866658.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:39.142Z,1478866659.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:39.186Z,1478866659.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:39.533Z,1478866659.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:39.591Z,1478866659.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:39.939Z,1478866659.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:39.994Z,1478866659.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:40.331Z,1478866660.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:40.382Z,1478866660.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:40.758Z,1478866660.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:40.813Z,1478866660.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:41.127Z,1478866661.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:41.204Z,1478866661.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:41.529Z,1478866661.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:41.545Z,1478866661.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:41.936Z,1478866661.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:41.998Z,1478866661.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:42.327Z,1478866662.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:42.387Z,1478866662.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:42.734Z,1478866662.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:42.766Z,1478866662.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:43.137Z,1478866663.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:43.206Z,1478866663.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:43.554Z,1478866663.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:43.578Z,1478866663.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:43.934Z,1478866663.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:44.003Z,1478866664.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:44.327Z,1478866664.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:44.362Z,1478866664.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:44.742Z,1478866664.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:44.822Z,1478866664.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:45.155Z,1478866665.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:45.171Z,1478866665.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:45.529Z,1478866665.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:45.618Z,1478866665.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:45.978Z,1478866665.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:46.049Z,1478866666.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:46.327Z,1478866666.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:46.361Z,1478866666.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:46.725Z,1478866666.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:46.741Z,1478866666.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:47.131Z,1478866667.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:47.154Z,1478866667.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:47.532Z,1478866667.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:47.553Z,1478866667.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:47.934Z,1478866667.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:47.949Z,1478866667.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:48.341Z,1478866668.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:48.361Z,1478866668.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:48.725Z,1478866668.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:48.777Z,1478866668.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:49.125Z,1478866669.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:49.151Z,1478866669.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:49.525Z,1478866669.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:49.549Z,1478866669.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:49.929Z,1478866669.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:49.958Z,1478866669.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:50.387Z,1478866670.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:50.427Z,1478866670.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:50.725Z,1478866670.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:50.744Z,1478866670.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:51.125Z,1478866671.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:51.140Z,1478866671.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:51.529Z,1478866671.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:51.545Z,1478866671.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:51.925Z,1478866671.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:51.940Z,1478866671.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:52.344Z,1478866672.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:52.373Z,1478866672.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:52.729Z,1478866672.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:52.749Z,1478866672.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:53.129Z,1478866673.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:53.149Z,1478866673.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:53.529Z,1478866673.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:53.549Z,1478866673.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:53.930Z,1478866673.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:53.946Z,1478866673.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:57.209Z,1478866677.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:57.246Z,1478866677.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:57.337Z,1478866677.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:57.369Z,1478866677.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:57.706Z,1478866677.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:57.750Z,1478866677.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:58.097Z,1478866678.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:58.124Z,1478866678.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:58.497Z,1478866678.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:58.513Z,1478866678.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:58.893Z,1478866678.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:58.946Z,1478866678.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:59.297Z,1478866679.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:59.322Z,1478866679.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:17:59.693Z,1478866679.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:17:59.745Z,1478866679.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:00.097Z,1478866680.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:00.142Z,1478866680.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:00.493Z,1478866680.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:00.513Z,1478866680.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:00.897Z,1478866680.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:00.913Z,1478866680.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:01.297Z,1478866681.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:01.327Z,1478866681.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:01.697Z,1478866681.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:01.728Z,1478866681.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:02.094Z,1478866682.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:02.109Z,1478866682.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:02.493Z,1478866682.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:02.513Z,1478866682.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:02.934Z,1478866682.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:02.950Z,1478866682.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:03.298Z,1478866683.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:03.313Z,1478866683.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:03.698Z,1478866683.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:03.742Z,1478866683.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:04.093Z,1478866684.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:04.109Z,1478866684.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:04.497Z,1478866684.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:04.520Z,1478866684.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:04.893Z,1478866684.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:04.909Z,1478866684.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:05.290Z,1478866685.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:05.305Z,1478866685.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:05.697Z,1478866685.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:05.714Z,1478866685.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:06.097Z,1478866686.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:06.120Z,1478866686.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:06.498Z,1478866686.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:06.513Z,1478866686.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:06.897Z,1478866686.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:06.913Z,1478866686.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:07.309Z,1478866687.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:07.326Z,1478866687.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:07.697Z,1478866687.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:07.719Z,1478866687.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:08.097Z,1478866688.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:08.120Z,1478866688.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:08.497Z,1478866688.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:08.512Z,1478866688.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:08.897Z,1478866688.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:08.919Z,1478866688.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:09.293Z,1478866689.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:09.313Z,1478866689.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:09.697Z,1478866689.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:09.720Z,1478866689.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:10.093Z,1478866690.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:10.113Z,1478866690.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:10.497Z,1478866690.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:10.520Z,1478866690.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:10.893Z,1478866690.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:10.926Z,1478866690.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:11.297Z,1478866691.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:11.319Z,1478866691.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:11.693Z,1478866691.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:11.709Z,1478866691.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:12.097Z,1478866692.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:12.112Z,1478866692.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:12.580Z,1478866692.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:12.648Z,1478866692.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:12.895Z,1478866692.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:12.915Z,1478866692.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:13.295Z,1478866693.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:13.341Z,1478866693.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:13.694Z,1478866693.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:13.709Z,1478866693.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:14.108Z,1478866694.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:14.177Z,1478866694.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:14.494Z,1478866694.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:14.552Z,1478866694.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:14.894Z,1478866694.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:14.976Z,1478866694.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:15.302Z,1478866695.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:15.334Z,1478866695.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:15.694Z,1478866695.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:15.733Z,1478866695.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:16.094Z,1478866696.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:16.129Z,1478866696.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:16.495Z,1478866696.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:16.538Z,1478866696.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:16.894Z,1478866696.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:16.929Z,1478866696.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:17.294Z,1478866697.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:17.325Z,1478866697.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:17.695Z,1478866697.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:17.729Z,1478866697.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:18.094Z,1478866698.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:18.129Z,1478866698.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:18.494Z,1478866698.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:18.529Z,1478866698.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:18.895Z,1478866698.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:18.924Z,1478866698.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:19.295Z,1478866699.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:19.329Z,1478866699.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:19.694Z,1478866699.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:19.733Z,1478866699.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:20.095Z,1478866700.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:20.110Z,1478866700.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:20.495Z,1478866700.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:20.518Z,1478866700.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:20.894Z,1478866700.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:20.929Z,1478866700.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:21.294Z,1478866701.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:21.338Z,1478866701.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:21.694Z,1478866701.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:21.710Z,1478866701.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:22.094Z,1478866702.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:22.130Z,1478866702.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:22.495Z,1478866702.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:22.515Z,1478866702.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:22.894Z,1478866702.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:22.929Z,1478866702.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:23.294Z,1478866703.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:23.349Z,1478866703.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:23.695Z,1478866703.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:23.718Z,1478866703.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:24.094Z,1478866704.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:24.129Z,1478866704.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:24.494Z,1478866704.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:24.525Z,1478866704.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:24.895Z,1478866704.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:24.919Z,1478866704.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:25.294Z,1478866705.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:25.333Z,1478866705.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:25.694Z,1478866705.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:25.749Z,1478866705.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:26.094Z,1478866706.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:26.118Z,1478866706.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:26.494Z,1478866706.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:26.529Z,1478866706.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:26.894Z,1478866706.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:26.949Z,1478866706.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:27.295Z,1478866707.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:27.319Z,1478866707.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:27.694Z,1478866707.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:27.737Z,1478866707.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:28.094Z,1478866708.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:28.129Z,1478866708.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:28.495Z,1478866708.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:28.546Z,1478866708.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:28.894Z,1478866708.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:28.938Z,1478866708.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:29.294Z,1478866709.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:29.329Z,1478866709.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:29.695Z,1478866709.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:29.738Z,1478866709.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:30.095Z,1478866710.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:30.141Z,1478866710.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:30.502Z,1478866710.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:30.533Z,1478866710.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:30.904Z,1478866710.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:30.930Z,1478866710.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:31.295Z,1478866711.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:31.341Z,1478866711.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:31.695Z,1478866711.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:31.741Z,1478866711.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:32.095Z,1478866712.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:32.138Z,1478866712.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:32.494Z,1478866712.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:32.541Z,1478866712.541 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:32.541Z,1478866712.541 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 130
2016-11-11T12:18:32.541Z,1478866712.541 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:18:32.548Z,1478866712.548 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:32.548Z,1478866712.548 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 130
2016-11-11T12:18:32.548Z,1478866712.548 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:18:32.550Z,1478866712.550 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:32.550Z,1478866712.550 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 130
2016-11-11T12:18:32.550Z,1478866712.550 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:18:32.604Z,1478866712.604 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:18:32.604Z,1478866712.604 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:18:32.605Z,1478866712.605 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:18:32.893Z,1478866712.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:32.950Z,1478866712.950 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:18:32.950Z,1478866712.950 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 130
2016-11-11T12:18:32.950Z,1478866712.950 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:18:32.951Z,1478866712.951 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 130
2016-11-11T12:18:32.951Z,1478866712.951 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:18:32.951Z,1478866712.951 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 130
2016-11-11T12:18:33.300Z,1478866713.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:33.321Z,1478866713.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:18:33.321Z,1478866713.321 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:18:33.322Z,1478866713.322 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:18:33.326Z,1478866713.326 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:18:33.327Z,1478866713.327 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:18:33.327Z,1478866713.328 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:18:33.328Z,1478866713.328 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:18:33.328Z,1478866713.328 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:18:33.329Z,1478866713.329 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:18:33.705Z,1478866713.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:33.726Z,1478866713.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:34.093Z,1478866714.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:34.126Z,1478866714.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:34.493Z,1478866714.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:34.525Z,1478866714.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:34.893Z,1478866714.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:34.925Z,1478866714.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:35.293Z,1478866715.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:35.326Z,1478866715.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:35.693Z,1478866715.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:35.729Z,1478866715.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:36.093Z,1478866716.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:36.129Z,1478866716.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:36.493Z,1478866716.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:36.529Z,1478866716.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:36.893Z,1478866716.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:36.929Z,1478866716.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:37.293Z,1478866717.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:37.328Z,1478866717.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:37.693Z,1478866717.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:37.729Z,1478866717.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:38.105Z,1478866718.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:38.141Z,1478866718.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:38.498Z,1478866718.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:38.525Z,1478866718.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:38.899Z,1478866718.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:38.921Z,1478866718.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:39.301Z,1478866719.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:39.317Z,1478866719.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:39.705Z,1478866719.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:39.772Z,1478866719.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:40.094Z,1478866720.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:40.120Z,1478866720.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:40.494Z,1478866720.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:40.557Z,1478866720.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:40.894Z,1478866720.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:40.929Z,1478866720.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:41.293Z,1478866721.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:41.326Z,1478866721.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:41.693Z,1478866721.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:41.734Z,1478866721.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:42.101Z,1478866722.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:42.137Z,1478866722.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:42.498Z,1478866722.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:42.546Z,1478866722.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:42.900Z,1478866722.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:42.950Z,1478866722.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:43.298Z,1478866723.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:43.313Z,1478866723.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:43.698Z,1478866723.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:43.722Z,1478866723.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:44.098Z,1478866724.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:44.113Z,1478866724.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:44.499Z,1478866724.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:44.521Z,1478866724.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:44.900Z,1478866724.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:44.915Z,1478866724.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:45.307Z,1478866725.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:45.323Z,1478866725.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:45.704Z,1478866725.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:45.725Z,1478866725.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:46.100Z,1478866726.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:46.115Z,1478866726.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:46.493Z,1478866726.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:46.518Z,1478866726.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:46.904Z,1478866726.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:46.927Z,1478866726.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:47.293Z,1478866727.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:47.327Z,1478866727.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:47.693Z,1478866727.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:47.729Z,1478866727.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:48.093Z,1478866728.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:48.124Z,1478866728.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:48.497Z,1478866728.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:48.527Z,1478866728.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:48.893Z,1478866728.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:48.917Z,1478866728.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:49.293Z,1478866729.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:49.329Z,1478866729.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:49.697Z,1478866729.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:49.729Z,1478866729.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:50.093Z,1478866730.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:50.117Z,1478866730.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:50.496Z,1478866730.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:50.520Z,1478866730.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:50.897Z,1478866730.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:50.954Z,1478866730.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:51.303Z,1478866731.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:51.319Z,1478866731.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:51.699Z,1478866731.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:51.726Z,1478866731.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:52.093Z,1478866732.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:52.127Z,1478866732.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:52.493Z,1478866732.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:52.525Z,1478866732.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:52.893Z,1478866732.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:52.925Z,1478866732.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:53.301Z,1478866733.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:53.346Z,1478866733.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:53.693Z,1478866733.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:53.733Z,1478866733.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:54.099Z,1478866734.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:54.116Z,1478866734.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:57.469Z,1478866737.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:57.529Z,1478866737.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:57.617Z,1478866737.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:57.653Z,1478866737.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:58.021Z,1478866738.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:58.036Z,1478866738.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:58.420Z,1478866738.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:58.441Z,1478866738.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:58.817Z,1478866738.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:58.871Z,1478866738.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:59.220Z,1478866739.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:59.235Z,1478866739.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:18:59.617Z,1478866739.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:18:59.674Z,1478866739.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:00.020Z,1478866740.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:00.075Z,1478866740.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:00.417Z,1478866740.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:00.437Z,1478866740.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:00.816Z,1478866740.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:00.832Z,1478866740.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:01.220Z,1478866741.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:01.236Z,1478866741.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:01.609Z,1478866741.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:01.634Z,1478866741.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:02.009Z,1478866742.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:02.041Z,1478866742.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:02.420Z,1478866742.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:02.442Z,1478866742.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:02.820Z,1478866742.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:02.841Z,1478866742.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:03.209Z,1478866743.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:03.239Z,1478866743.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:03.609Z,1478866743.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:03.641Z,1478866743.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:04.009Z,1478866744.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:04.042Z,1478866744.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:04.409Z,1478866744.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:04.446Z,1478866744.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:04.817Z,1478866744.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:04.849Z,1478866744.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:05.209Z,1478866745.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:05.252Z,1478866745.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:05.609Z,1478866745.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:05.652Z,1478866745.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:06.018Z,1478866746.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:06.049Z,1478866746.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:06.409Z,1478866746.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:06.452Z,1478866746.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:06.809Z,1478866746.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:06.853Z,1478866746.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:07.209Z,1478866747.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:07.252Z,1478866747.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:07.609Z,1478866747.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:07.645Z,1478866747.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:08.009Z,1478866748.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:08.033Z,1478866748.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:08.412Z,1478866748.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:08.445Z,1478866748.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:08.816Z,1478866748.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:08.842Z,1478866748.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:09.209Z,1478866749.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:09.241Z,1478866749.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:09.609Z,1478866749.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:09.645Z,1478866749.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:10.025Z,1478866750.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:10.041Z,1478866750.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:10.424Z,1478866750.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:10.442Z,1478866750.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:10.810Z,1478866750.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:10.841Z,1478866750.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:11.209Z,1478866751.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:11.269Z,1478866751.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:11.609Z,1478866751.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:11.629Z,1478866751.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:12.018Z,1478866752.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:12.069Z,1478866752.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:12.421Z,1478866752.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:12.441Z,1478866752.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:12.816Z,1478866752.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:12.875Z,1478866752.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:13.217Z,1478866753.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:13.233Z,1478866753.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:13.616Z,1478866753.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:13.671Z,1478866753.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:14.012Z,1478866754.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:14.069Z,1478866754.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:14.417Z,1478866754.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:14.433Z,1478866754.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:14.820Z,1478866754.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:14.841Z,1478866754.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:15.216Z,1478866755.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:15.237Z,1478866755.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:15.609Z,1478866755.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:15.641Z,1478866755.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:16.009Z,1478866756.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:16.037Z,1478866756.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:16.409Z,1478866756.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:16.441Z,1478866756.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:16.809Z,1478866756.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:16.841Z,1478866756.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:17.220Z,1478866757.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:17.241Z,1478866757.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:17.609Z,1478866757.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:17.641Z,1478866757.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:18.009Z,1478866758.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:18.034Z,1478866758.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:18.416Z,1478866758.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:18.439Z,1478866758.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:18.809Z,1478866758.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:18.842Z,1478866758.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:19.209Z,1478866759.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:19.241Z,1478866759.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:19.613Z,1478866759.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:19.645Z,1478866759.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:20.009Z,1478866760.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:20.041Z,1478866760.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:20.409Z,1478866760.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:20.442Z,1478866760.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:20.809Z,1478866760.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:20.842Z,1478866760.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:21.209Z,1478866761.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:21.256Z,1478866761.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:21.614Z,1478866761.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:21.630Z,1478866761.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:22.014Z,1478866762.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:22.030Z,1478866762.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:22.417Z,1478866762.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:22.437Z,1478866762.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:22.815Z,1478866762.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:22.831Z,1478866762.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:23.216Z,1478866763.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:23.231Z,1478866763.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:23.617Z,1478866763.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:23.641Z,1478866763.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:24.016Z,1478866764.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:24.037Z,1478866764.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:24.416Z,1478866764.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:24.438Z,1478866764.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:24.816Z,1478866764.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:24.849Z,1478866764.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:25.221Z,1478866765.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:25.258Z,1478866765.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:25.609Z,1478866765.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:25.649Z,1478866765.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:26.009Z,1478866766.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:26.057Z,1478866766.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:26.409Z,1478866766.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:26.445Z,1478866766.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:26.809Z,1478866766.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:26.850Z,1478866766.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:27.209Z,1478866767.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:27.241Z,1478866767.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:27.609Z,1478866767.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:27.657Z,1478866767.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:28.009Z,1478866768.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:28.057Z,1478866768.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:28.409Z,1478866768.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:28.452Z,1478866768.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:28.809Z,1478866768.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:28.824Z,1478866768.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:29.213Z,1478866769.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:29.257Z,1478866769.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:29.609Z,1478866769.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:29.629Z,1478866769.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:30.009Z,1478866770.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:30.029Z,1478866770.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:30.421Z,1478866770.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:30.435Z,1478866770.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:30.816Z,1478866770.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:30.831Z,1478866770.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:31.212Z,1478866771.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:31.228Z,1478866771.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:31.617Z,1478866771.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:31.632Z,1478866771.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:32.009Z,1478866772.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:32.024Z,1478866772.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:32.409Z,1478866772.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:32.424Z,1478866772.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:32.813Z,1478866772.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:32.829Z,1478866772.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:33.212Z,1478866773.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:33.233Z,1478866773.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:33.616Z,1478866773.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:33.632Z,1478866773.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:34.023Z,1478866774.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:34.039Z,1478866774.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:34.416Z,1478866774.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:34.431Z,1478866774.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:34.816Z,1478866774.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:34.832Z,1478866774.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:35.224Z,1478866775.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:35.245Z,1478866775.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:35.620Z,1478866775.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:35.635Z,1478866775.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:36.009Z,1478866776.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:36.029Z,1478866776.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:36.409Z,1478866776.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:36.454Z,1478866776.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:36.821Z,1478866776.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:36.841Z,1478866776.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:37.216Z,1478866777.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:37.232Z,1478866777.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:37.611Z,1478866777.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:37.644Z,1478866777.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:38.009Z,1478866778.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:38.041Z,1478866778.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:38.409Z,1478866778.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:38.437Z,1478866778.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:38.808Z,1478866778.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:38.845Z,1478866778.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:39.209Z,1478866779.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:39.245Z,1478866779.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:39.609Z,1478866779.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:39.645Z,1478866779.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:40.017Z,1478866780.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:40.069Z,1478866780.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:40.409Z,1478866780.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:40.473Z,1478866780.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:40.816Z,1478866780.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:40.832Z,1478866780.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:41.219Z,1478866781.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:41.273Z,1478866781.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:41.616Z,1478866781.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:41.631Z,1478866781.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:42.012Z,1478866782.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:42.068Z,1478866782.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:42.424Z,1478866782.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:42.473Z,1478866782.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:42.809Z,1478866782.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:42.829Z,1478866782.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:43.209Z,1478866783.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:43.224Z,1478866783.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:43.613Z,1478866783.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:43.633Z,1478866783.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:44.017Z,1478866784.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:44.032Z,1478866784.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:44.417Z,1478866784.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:44.438Z,1478866784.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:44.813Z,1478866784.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:44.833Z,1478866784.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:45.216Z,1478866785.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:45.231Z,1478866785.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:45.617Z,1478866785.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:45.633Z,1478866785.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:46.012Z,1478866786.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:46.037Z,1478866786.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:46.409Z,1478866786.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:46.444Z,1478866786.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:46.810Z,1478866786.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:46.837Z,1478866786.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:47.209Z,1478866787.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:47.241Z,1478866787.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:47.609Z,1478866787.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:47.644Z,1478866787.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:48.009Z,1478866788.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:48.037Z,1478866788.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:48.409Z,1478866788.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:48.441Z,1478866788.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:48.809Z,1478866788.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:48.842Z,1478866788.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:49.209Z,1478866789.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:49.245Z,1478866789.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:49.609Z,1478866789.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:49.640Z,1478866789.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:50.017Z,1478866790.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:50.038Z,1478866790.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:50.415Z,1478866790.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:50.430Z,1478866790.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:50.819Z,1478866790.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:50.834Z,1478866790.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:51.224Z,1478866791.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:51.239Z,1478866791.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:51.616Z,1478866791.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:51.632Z,1478866791.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:52.009Z,1478866792.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:52.034Z,1478866792.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:52.423Z,1478866792.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:52.438Z,1478866792.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:52.809Z,1478866792.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:52.845Z,1478866792.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:53.209Z,1478866793.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:53.249Z,1478866793.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:53.271Z,1478866793.271 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T12:19:53.271Z,1478866793.271 [Default:CheckIn:C.Wait] Stopped
2016-11-11T12:19:53.271Z,1478866793.271 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T12:19:53.271Z,1478866793.272 [Default:CheckIn:D] Running Loop=1
2016-11-11T12:19:53.609Z,1478866793.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:53.629Z,1478866793.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:53.654Z,1478866793.654 [Default:CheckIn:D] Stopped
2016-11-11T12:19:53.654Z,1478866793.654 [Default:CheckIn:E] Running Loop=1
2016-11-11T12:19:54.013Z,1478866794.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:54.033Z,1478866794.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:54.067Z,1478866794.067 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 449.872396 min 
2016-11-11T12:19:54.068Z,1478866794.068 [Default:CheckIn:E] Stopped
2016-11-11T12:19:54.068Z,1478866794.068 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T12:19:54.068Z,1478866794.068 [Default:CheckIn] Stopped
2016-11-11T12:19:54.068Z,1478866794.068 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T12:19:54.068Z,1478866794.068 [Default:CheckIn](INFO): Running loop #44
2016-11-11T12:19:54.068Z,1478866794.068 [Default:CheckIn] Running Loop=44
2016-11-11T12:19:54.068Z,1478866794.068 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T12:19:54.068Z,1478866794.069 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T12:19:54.421Z,1478866794.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:54.458Z,1478866794.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:57.844Z,1478866797.844 [NAL9602](INFO): Powering up
2016-11-11T12:19:57.871Z,1478866797.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:57.950Z,1478866797.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:58.083Z,1478866798.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:58.112Z,1478866798.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:58.441Z,1478866798.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:58.481Z,1478866798.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:58.841Z,1478866798.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:58.890Z,1478866798.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:59.241Z,1478866799.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:59.264Z,1478866799.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:19:59.641Z,1478866799.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:19:59.724Z,1478866799.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:00.048Z,1478866800.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:00.100Z,1478866800.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:00.447Z,1478866800.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:00.463Z,1478866800.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:00.852Z,1478866800.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:00.873Z,1478866800.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:01.248Z,1478866801.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:01.263Z,1478866801.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:01.648Z,1478866801.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:01.733Z,1478866801.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:02.041Z,1478866802.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:02.072Z,1478866802.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:02.441Z,1478866802.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:02.477Z,1478866802.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:02.841Z,1478866802.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:02.869Z,1478866802.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:03.240Z,1478866803.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:03.286Z,1478866803.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:03.641Z,1478866803.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:03.715Z,1478866803.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:04.041Z,1478866804.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:04.061Z,1478866804.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:04.446Z,1478866804.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:04.465Z,1478866804.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:04.844Z,1478866804.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:04.862Z,1478866804.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:05.244Z,1478866805.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:05.260Z,1478866805.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:05.666Z,1478866805.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:05.730Z,1478866805.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:06.049Z,1478866806.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:06.076Z,1478866806.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:06.449Z,1478866806.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:06.468Z,1478866806.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:06.848Z,1478866806.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:06.874Z,1478866806.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:07.241Z,1478866807.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:07.266Z,1478866807.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:07.641Z,1478866807.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:07.681Z,1478866807.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:08.041Z,1478866808.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:08.063Z,1478866808.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:08.460Z,1478866808.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:08.496Z,1478866808.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:08.832Z,1478866808.832 [NAL9602](INFO): NAL9602 initialized
2016-11-11T12:20:08.849Z,1478866808.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:08.870Z,1478866808.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:09.254Z,1478866809.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:09.300Z,1478866809.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:09.625Z,1478866809.625 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T12:20:09.625Z,1478866809.625 [NAL9602] Data Fault, FailCount= 1
2016-11-11T12:20:09.625Z,1478866809.625 [NAL9602](ERROR): Data Fault
2016-11-11T12:20:09.660Z,1478866809.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:09.692Z,1478866809.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:09.734Z,1478866809.734 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T12:20:10.029Z,1478866810.029 [NAL9602](INFO): Powering down
2016-11-11T12:20:10.053Z,1478866810.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:10.091Z,1478866810.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:10.440Z,1478866810.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:10.478Z,1478866810.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:10.841Z,1478866810.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:10.873Z,1478866810.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:10.905Z,1478866810.905 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T12:20:10.905Z,1478866810.905 [NAL9602] No Fault, FailCount= 1
2016-11-11T12:20:11.251Z,1478866811.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:11.278Z,1478866811.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:11.649Z,1478866811.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:11.679Z,1478866811.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:12.041Z,1478866812.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:12.126Z,1478866812.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:12.441Z,1478866812.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:12.477Z,1478866812.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:12.851Z,1478866812.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:12.924Z,1478866812.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:13.241Z,1478866813.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:13.294Z,1478866813.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:13.655Z,1478866813.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:13.753Z,1478866813.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:14.049Z,1478866814.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:14.090Z,1478866814.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:14.449Z,1478866814.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:14.456Z,1478866814.456 [PNI_TCM](ERROR): CRC does not match. Expected:0x38614 got:0x7490
2016-11-11T12:20:14.502Z,1478866814.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:14.848Z,1478866814.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:14.892Z,1478866814.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:15.229Z,1478866815.229 [NAL9602](INFO): Powering up NAL9602
2016-11-11T12:20:15.246Z,1478866815.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:15.272Z,1478866815.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:15.656Z,1478866815.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:15.716Z,1478866815.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:16.042Z,1478866816.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:16.071Z,1478866816.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:16.445Z,1478866816.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:16.485Z,1478866816.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:16.841Z,1478866816.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:16.877Z,1478866816.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:17.241Z,1478866817.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:17.280Z,1478866817.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:17.690Z,1478866817.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:17.730Z,1478866817.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:18.041Z,1478866818.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:18.079Z,1478866818.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:18.441Z,1478866818.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:18.469Z,1478866818.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:18.841Z,1478866818.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:18.872Z,1478866818.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:19.248Z,1478866819.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:19.263Z,1478866819.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:19.681Z,1478866819.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:19.726Z,1478866819.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:20.041Z,1478866820.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:20.085Z,1478866820.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:20.441Z,1478866820.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:20.480Z,1478866820.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:20.843Z,1478866820.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:20.859Z,1478866820.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:21.241Z,1478866821.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:21.283Z,1478866821.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:21.650Z,1478866821.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:21.684Z,1478866821.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:22.049Z,1478866822.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:22.077Z,1478866822.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:22.450Z,1478866822.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:22.466Z,1478866822.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:22.848Z,1478866822.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:22.881Z,1478866822.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:23.248Z,1478866823.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:23.270Z,1478866823.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:23.655Z,1478866823.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:23.671Z,1478866823.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:24.043Z,1478866824.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:24.068Z,1478866824.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:24.449Z,1478866824.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:24.489Z,1478866824.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:24.846Z,1478866824.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:24.866Z,1478866824.866 [PNI_TCM](ERROR): CRC does not match. Expected:0x3521 got:0x32768
2016-11-11T12:20:24.893Z,1478866824.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:25.251Z,1478866825.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:25.293Z,1478866825.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:25.656Z,1478866825.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:25.680Z,1478866825.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:26.029Z,1478866826.029 [NAL9602](INFO): NAL9602 initialized
2016-11-11T12:20:26.045Z,1478866826.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:26.145Z,1478866826.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:26.451Z,1478866826.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:26.458Z,1478866826.458 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T12:20:26.521Z,1478866826.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:26.857Z,1478866826.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:26.881Z,1478866826.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:27.258Z,1478866827.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:27.305Z,1478866827.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:27.689Z,1478866827.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:27.721Z,1478866827.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:28.043Z,1478866828.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:28.101Z,1478866828.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:28.453Z,1478866828.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:28.501Z,1478866828.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:28.852Z,1478866828.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:28.884Z,1478866828.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:29.262Z,1478866829.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:29.290Z,1478866829.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:29.696Z,1478866829.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:29.718Z,1478866829.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:30.055Z,1478866830.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:30.097Z,1478866830.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:30.449Z,1478866830.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:30.476Z,1478866830.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:30.850Z,1478866830.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:30.879Z,1478866830.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:31.254Z,1478866831.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:31.269Z,1478866831.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:31.661Z,1478866831.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:31.738Z,1478866831.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:32.045Z,1478866832.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:32.085Z,1478866832.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:32.441Z,1478866832.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:32.481Z,1478866832.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:32.843Z,1478866832.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:32.849Z,1478866832.849 [PNI_TCM](ERROR): CRC does not match. Expected:0x17048 got:0x1857
2016-11-11T12:20:32.877Z,1478866832.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:33.243Z,1478866833.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:33.282Z,1478866833.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:33.682Z,1478866833.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:33.714Z,1478866833.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:34.058Z,1478866834.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:34.090Z,1478866834.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:34.452Z,1478866834.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:34.474Z,1478866834.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:34.855Z,1478866834.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:34.878Z,1478866834.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:35.252Z,1478866835.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:35.268Z,1478866835.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:35.652Z,1478866835.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:35.667Z,1478866835.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:36.052Z,1478866836.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:36.078Z,1478866836.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:36.453Z,1478866836.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:36.473Z,1478866836.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:36.845Z,1478866836.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:36.885Z,1478866836.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:37.247Z,1478866837.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:37.262Z,1478866837.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:37.647Z,1478866837.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:37.671Z,1478866837.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:38.045Z,1478866838.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:38.127Z,1478866838.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:38.445Z,1478866838.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:38.472Z,1478866838.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:38.843Z,1478866838.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:38.877Z,1478866838.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:39.266Z,1478866839.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:39.286Z,1478866839.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:39.668Z,1478866839.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:39.684Z,1478866839.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:40.103Z,1478866840.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:40.169Z,1478866840.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:40.453Z,1478866840.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:40.505Z,1478866840.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:40.853Z,1478866840.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:40.909Z,1478866840.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:41.249Z,1478866841.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:41.273Z,1478866841.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:41.673Z,1478866841.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:41.718Z,1478866841.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:42.052Z,1478866842.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:42.073Z,1478866842.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:42.443Z,1478866842.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:42.500Z,1478866842.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:42.842Z,1478866842.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:42.890Z,1478866842.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:43.242Z,1478866843.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:43.276Z,1478866843.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:43.661Z,1478866843.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:43.718Z,1478866843.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:44.045Z,1478866844.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:44.081Z,1478866844.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:44.465Z,1478866844.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:44.480Z,1478866844.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:44.853Z,1478866844.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:44.880Z,1478866844.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:45.264Z,1478866845.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:45.286Z,1478866845.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:45.689Z,1478866845.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:45.721Z,1478866845.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:46.041Z,1478866846.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:46.058Z,1478866846.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:46.441Z,1478866846.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:46.461Z,1478866846.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:46.848Z,1478866846.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:46.877Z,1478866846.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:47.244Z,1478866847.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:47.272Z,1478866847.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:47.661Z,1478866847.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:47.702Z,1478866847.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:48.041Z,1478866848.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:48.078Z,1478866848.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:48.443Z,1478866848.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:48.471Z,1478866848.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:48.841Z,1478866848.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:48.873Z,1478866848.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:49.246Z,1478866849.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:49.272Z,1478866849.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:49.660Z,1478866849.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:49.745Z,1478866849.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:50.056Z,1478866850.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:50.092Z,1478866850.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:50.460Z,1478866850.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:50.494Z,1478866850.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:50.860Z,1478866850.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:50.892Z,1478866850.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:51.253Z,1478866851.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:51.273Z,1478866851.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:51.646Z,1478866851.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:51.674Z,1478866851.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:52.052Z,1478866852.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:52.132Z,1478866852.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:52.445Z,1478866852.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:52.481Z,1478866852.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:52.842Z,1478866852.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:52.857Z,1478866852.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:53.245Z,1478866853.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:53.265Z,1478866853.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:53.649Z,1478866853.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:53.669Z,1478866853.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:54.054Z,1478866854.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:54.149Z,1478866854.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:54.449Z,1478866854.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:54.472Z,1478866854.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:58.066Z,1478866858.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:58.164Z,1478866858.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:58.249Z,1478866858.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:58.280Z,1478866858.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:58.651Z,1478866858.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:58.702Z,1478866858.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:59.052Z,1478866859.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:59.081Z,1478866859.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:59.440Z,1478866859.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:59.489Z,1478866859.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:20:59.842Z,1478866859.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:20:59.889Z,1478866859.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:00.244Z,1478866860.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:00.259Z,1478866860.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:00.640Z,1478866860.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:00.668Z,1478866860.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:01.037Z,1478866861.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:01.069Z,1478866861.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:01.437Z,1478866861.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:01.464Z,1478866861.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:01.853Z,1478866861.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:01.868Z,1478866861.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:02.237Z,1478866862.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:02.271Z,1478866862.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:02.637Z,1478866862.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:02.674Z,1478866862.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:03.060Z,1478866863.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:03.079Z,1478866863.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:03.448Z,1478866863.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:03.477Z,1478866863.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:03.868Z,1478866863.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:03.884Z,1478866863.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:04.248Z,1478866864.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:04.283Z,1478866864.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:04.637Z,1478866864.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:04.680Z,1478866864.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:04.916Z,1478866864.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:05.037Z,1478866865.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:05.052Z,1478866865.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:05.440Z,1478866865.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:05.465Z,1478866865.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:05.712Z,1478866865.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:05.840Z,1478866865.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:05.870Z,1478866865.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:06.245Z,1478866866.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:06.265Z,1478866866.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:06.641Z,1478866866.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:06.663Z,1478866866.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:07.037Z,1478866867.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:07.071Z,1478866867.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:07.438Z,1478866867.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:07.474Z,1478866867.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:07.837Z,1478866867.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:07.870Z,1478866867.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:08.268Z,1478866868.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:08.289Z,1478866868.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:08.660Z,1478866868.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:08.676Z,1478866868.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:09.060Z,1478866869.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:09.080Z,1478866869.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:09.448Z,1478866869.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:09.481Z,1478866869.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:09.837Z,1478866869.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:09.874Z,1478866869.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:10.237Z,1478866870.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:10.273Z,1478866870.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:10.637Z,1478866870.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:10.673Z,1478866870.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:11.038Z,1478866871.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:11.074Z,1478866871.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:11.437Z,1478866871.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:11.473Z,1478866871.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:11.849Z,1478866871.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:11.869Z,1478866871.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:12.242Z,1478866872.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:12.315Z,1478866872.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:12.637Z,1478866872.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:12.669Z,1478866872.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:13.037Z,1478866873.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:13.086Z,1478866873.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:13.464Z,1478866873.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:13.479Z,1478866873.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:13.848Z,1478866873.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:13.897Z,1478866873.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:14.252Z,1478866874.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:14.297Z,1478866874.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:14.652Z,1478866874.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:14.668Z,1478866874.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:15.040Z,1478866875.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:15.068Z,1478866875.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:15.440Z,1478866875.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:15.477Z,1478866875.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:15.846Z,1478866875.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:15.872Z,1478866875.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:16.237Z,1478866876.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:16.273Z,1478866876.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:16.637Z,1478866876.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:16.672Z,1478866876.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:17.038Z,1478866877.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:17.077Z,1478866877.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:17.437Z,1478866877.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:17.463Z,1478866877.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:17.853Z,1478866877.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:17.873Z,1478866877.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:18.248Z,1478866878.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:18.269Z,1478866878.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:18.659Z,1478866878.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:18.674Z,1478866878.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:19.048Z,1478866879.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:19.077Z,1478866879.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:19.452Z,1478866879.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:19.489Z,1478866879.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:19.852Z,1478866879.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:19.876Z,1478866879.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:20.249Z,1478866880.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:20.283Z,1478866880.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:20.641Z,1478866880.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:20.661Z,1478866880.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:21.043Z,1478866881.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:21.059Z,1478866881.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:21.445Z,1478866881.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:21.465Z,1478866881.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:21.840Z,1478866881.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:21.873Z,1478866881.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:22.244Z,1478866882.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:22.265Z,1478866882.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:22.644Z,1478866882.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:22.660Z,1478866882.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:23.045Z,1478866883.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:23.068Z,1478866883.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:23.445Z,1478866883.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:23.467Z,1478866883.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:23.847Z,1478866883.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:23.881Z,1478866883.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:24.252Z,1478866884.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:24.285Z,1478866884.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:24.652Z,1478866884.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:24.673Z,1478866884.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:25.052Z,1478866885.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:25.083Z,1478866885.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:25.446Z,1478866885.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:25.462Z,1478866885.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:25.840Z,1478866885.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:25.873Z,1478866885.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:26.244Z,1478866886.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:26.325Z,1478866886.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:26.638Z,1478866886.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:26.698Z,1478866886.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:27.037Z,1478866887.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:27.073Z,1478866887.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:27.437Z,1478866887.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:27.489Z,1478866887.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:27.845Z,1478866887.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:27.862Z,1478866887.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:28.243Z,1478866888.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:28.289Z,1478866888.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:28.644Z,1478866888.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:28.686Z,1478866888.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:29.052Z,1478866889.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:29.080Z,1478866889.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:29.449Z,1478866889.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:29.464Z,1478866889.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:29.864Z,1478866889.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:29.897Z,1478866889.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:30.248Z,1478866890.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:30.281Z,1478866890.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:30.649Z,1478866890.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:30.665Z,1478866890.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:31.044Z,1478866891.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:31.060Z,1478866891.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:31.444Z,1478866891.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:31.459Z,1478866891.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:31.849Z,1478866891.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:31.869Z,1478866891.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:32.248Z,1478866892.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:32.263Z,1478866892.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:32.645Z,1478866892.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:32.665Z,1478866892.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:33.037Z,1478866893.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:33.063Z,1478866893.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:33.437Z,1478866893.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:33.471Z,1478866893.471 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:33.471Z,1478866893.471 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 131
2016-11-11T12:21:33.471Z,1478866893.471 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:21:33.477Z,1478866893.477 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:33.478Z,1478866893.478 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 131
2016-11-11T12:21:33.478Z,1478866893.478 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:21:33.480Z,1478866893.480 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:33.480Z,1478866893.480 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 131
2016-11-11T12:21:33.480Z,1478866893.480 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:21:33.547Z,1478866893.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:21:33.548Z,1478866893.548 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:21:33.548Z,1478866893.548 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:21:33.853Z,1478866893.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:33.894Z,1478866893.894 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:21:33.894Z,1478866893.894 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 131
2016-11-11T12:21:33.895Z,1478866893.895 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:21:33.895Z,1478866893.895 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 131
2016-11-11T12:21:33.896Z,1478866893.895 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:21:33.896Z,1478866893.896 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 131
2016-11-11T12:21:34.252Z,1478866894.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:34.266Z,1478866894.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:21:34.266Z,1478866894.266 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:21:34.267Z,1478866894.267 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:21:34.283Z,1478866894.283 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:21:34.284Z,1478866894.284 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:21:34.284Z,1478866894.284 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:21:34.285Z,1478866894.285 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:21:34.285Z,1478866894.285 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:21:34.286Z,1478866894.286 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:21:34.654Z,1478866894.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:34.669Z,1478866894.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:35.059Z,1478866895.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:35.081Z,1478866895.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:35.463Z,1478866895.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:35.479Z,1478866895.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:35.845Z,1478866895.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:35.877Z,1478866895.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:36.237Z,1478866896.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:36.277Z,1478866896.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:36.640Z,1478866896.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:36.673Z,1478866896.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:37.048Z,1478866897.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:37.064Z,1478866897.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:37.445Z,1478866897.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:37.467Z,1478866897.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:37.837Z,1478866897.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:37.873Z,1478866897.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:38.241Z,1478866898.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:38.278Z,1478866898.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:38.638Z,1478866898.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:38.677Z,1478866898.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:39.042Z,1478866899.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:39.062Z,1478866899.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:39.452Z,1478866899.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:39.473Z,1478866899.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:39.859Z,1478866899.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:39.875Z,1478866899.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:40.259Z,1478866900.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:40.275Z,1478866900.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:40.659Z,1478866900.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:40.694Z,1478866900.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:41.037Z,1478866901.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:41.089Z,1478866901.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:41.438Z,1478866901.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:41.461Z,1478866901.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:41.849Z,1478866901.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:41.870Z,1478866901.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:42.254Z,1478866902.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:42.302Z,1478866902.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:42.637Z,1478866902.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:42.669Z,1478866902.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:43.037Z,1478866903.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:43.089Z,1478866903.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:43.438Z,1478866903.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:43.526Z,1478866903.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:43.846Z,1478866903.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:43.862Z,1478866903.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:44.245Z,1478866904.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:44.265Z,1478866904.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:44.656Z,1478866904.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:44.671Z,1478866904.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:45.049Z,1478866905.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:45.065Z,1478866905.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:45.453Z,1478866905.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:45.473Z,1478866905.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:45.855Z,1478866905.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:45.877Z,1478866905.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:46.237Z,1478866906.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:46.269Z,1478866906.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:46.637Z,1478866906.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:46.680Z,1478866906.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:47.037Z,1478866907.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:47.081Z,1478866907.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:47.438Z,1478866907.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:47.453Z,1478866907.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:47.841Z,1478866907.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:47.877Z,1478866907.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:48.245Z,1478866908.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:48.260Z,1478866908.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:48.640Z,1478866908.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:48.672Z,1478866908.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:49.044Z,1478866909.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:49.065Z,1478866909.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:49.437Z,1478866909.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:49.473Z,1478866909.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:49.856Z,1478866909.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:49.877Z,1478866909.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:50.257Z,1478866910.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:50.277Z,1478866910.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:50.659Z,1478866910.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:50.674Z,1478866910.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:51.052Z,1478866911.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:51.080Z,1478866911.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:51.437Z,1478866911.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:51.471Z,1478866911.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:51.846Z,1478866911.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:51.861Z,1478866911.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:52.241Z,1478866912.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:52.264Z,1478866912.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:52.640Z,1478866912.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:52.670Z,1478866912.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:53.041Z,1478866913.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:53.063Z,1478866913.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:53.440Z,1478866913.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:53.468Z,1478866913.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:53.845Z,1478866913.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:53.873Z,1478866913.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:54.238Z,1478866914.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:54.273Z,1478866914.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:54.657Z,1478866914.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:54.677Z,1478866914.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:58.098Z,1478866918.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:58.165Z,1478866918.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:58.262Z,1478866918.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:58.305Z,1478866918.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:58.653Z,1478866918.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:58.675Z,1478866918.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:59.064Z,1478866919.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:59.119Z,1478866919.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:59.452Z,1478866919.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:59.485Z,1478866919.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:21:59.872Z,1478866919.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:21:59.930Z,1478866919.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:00.265Z,1478866920.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:00.323Z,1478866920.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:00.641Z,1478866920.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:00.681Z,1478866920.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:01.041Z,1478866921.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:01.061Z,1478866921.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:01.448Z,1478866921.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:01.463Z,1478866921.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:01.849Z,1478866921.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:01.869Z,1478866921.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:02.256Z,1478866922.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:02.272Z,1478866922.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:02.641Z,1478866922.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:02.678Z,1478866922.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:03.041Z,1478866923.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:03.081Z,1478866923.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:03.441Z,1478866923.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:03.481Z,1478866923.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:03.841Z,1478866923.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:03.861Z,1478866923.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:04.264Z,1478866924.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:04.279Z,1478866924.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:04.662Z,1478866924.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:04.682Z,1478866924.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:05.065Z,1478866925.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:05.080Z,1478866925.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:05.486Z,1478866925.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:05.542Z,1478866925.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:05.841Z,1478866925.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:05.884Z,1478866925.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:06.241Z,1478866926.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:06.288Z,1478866926.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:06.647Z,1478866926.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:06.666Z,1478866926.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:07.050Z,1478866927.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:07.082Z,1478866927.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:07.442Z,1478866927.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:07.560Z,1478866927.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:07.844Z,1478866927.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:07.877Z,1478866927.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:08.249Z,1478866928.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:08.276Z,1478866928.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:08.646Z,1478866928.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:08.678Z,1478866928.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:09.041Z,1478866929.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:09.087Z,1478866929.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:09.493Z,1478866929.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:09.554Z,1478866929.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:09.856Z,1478866929.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:09.890Z,1478866929.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:10.256Z,1478866930.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:10.284Z,1478866930.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:10.660Z,1478866930.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:10.694Z,1478866930.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:11.049Z,1478866931.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:11.069Z,1478866931.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:11.486Z,1478866931.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:11.532Z,1478866931.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:11.848Z,1478866931.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:11.884Z,1478866931.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:12.241Z,1478866932.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:12.300Z,1478866932.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:12.641Z,1478866932.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:12.697Z,1478866932.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:13.041Z,1478866933.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:13.081Z,1478866933.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:13.442Z,1478866933.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:13.457Z,1478866933.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:13.841Z,1478866933.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:13.899Z,1478866933.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:14.269Z,1478866934.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:14.289Z,1478866934.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:14.663Z,1478866934.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:14.720Z,1478866934.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:15.041Z,1478866935.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:15.106Z,1478866935.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:15.445Z,1478866935.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:15.478Z,1478866935.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:15.841Z,1478866935.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:15.877Z,1478866935.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:16.272Z,1478866936.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:16.295Z,1478866936.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:16.663Z,1478866936.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:16.683Z,1478866936.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:17.042Z,1478866937.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:17.089Z,1478866937.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:17.442Z,1478866937.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:17.477Z,1478866937.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:17.841Z,1478866937.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:17.861Z,1478866937.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:18.242Z,1478866938.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:18.269Z,1478866938.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:18.642Z,1478866938.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:18.681Z,1478866938.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:19.041Z,1478866939.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:19.077Z,1478866939.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:19.493Z,1478866939.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:19.541Z,1478866939.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:19.841Z,1478866939.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:19.877Z,1478866939.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:20.245Z,1478866940.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:20.278Z,1478866940.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:20.642Z,1478866940.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:20.680Z,1478866940.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:21.041Z,1478866941.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:21.080Z,1478866941.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:21.509Z,1478866941.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:21.552Z,1478866941.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:21.849Z,1478866941.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:21.892Z,1478866941.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:22.250Z,1478866942.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:22.257Z,1478866942.257 [PNI_TCM](ERROR): CRC does not match. Expected:0x33947 got:0x61723
2016-11-11T12:22:22.297Z,1478866942.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:22.653Z,1478866942.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:22.689Z,1478866942.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:23.042Z,1478866943.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:23.081Z,1478866943.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:23.499Z,1478866943.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:23.553Z,1478866943.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:23.847Z,1478866943.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:23.881Z,1478866943.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:24.248Z,1478866944.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:24.291Z,1478866944.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:24.656Z,1478866944.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:24.692Z,1478866944.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:25.055Z,1478866945.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:25.072Z,1478866945.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:25.506Z,1478866945.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:25.542Z,1478866945.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:25.845Z,1478866945.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:25.890Z,1478866945.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:26.241Z,1478866946.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:26.271Z,1478866946.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:26.641Z,1478866946.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:26.682Z,1478866946.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:27.047Z,1478866947.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:27.098Z,1478866947.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:27.449Z,1478866947.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:27.518Z,1478866947.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:27.841Z,1478866947.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:27.877Z,1478866947.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:28.241Z,1478866948.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:28.276Z,1478866948.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:28.645Z,1478866948.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:28.722Z,1478866948.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:29.058Z,1478866949.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:29.105Z,1478866949.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:29.462Z,1478866949.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:29.469Z,1478866949.469 [PNI_TCM](ERROR): CRC does not match. Expected:0x8394 got:0x37703
2016-11-11T12:22:29.524Z,1478866949.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:29.842Z,1478866949.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:29.979Z,1478866949.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:30.244Z,1478866950.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:30.259Z,1478866950.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:30.642Z,1478866950.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:30.674Z,1478866950.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:31.042Z,1478866951.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:31.086Z,1478866951.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:31.454Z,1478866951.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:31.511Z,1478866951.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:31.847Z,1478866951.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:31.877Z,1478866951.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:32.243Z,1478866952.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:32.289Z,1478866952.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:32.643Z,1478866952.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:32.693Z,1478866952.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:33.051Z,1478866953.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:33.095Z,1478866953.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:33.506Z,1478866953.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:33.545Z,1478866953.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:33.854Z,1478866953.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:33.896Z,1478866953.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:34.261Z,1478866954.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:34.300Z,1478866954.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:34.655Z,1478866954.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:34.696Z,1478866954.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:35.054Z,1478866955.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:35.081Z,1478866955.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:35.460Z,1478866955.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:35.525Z,1478866955.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:35.850Z,1478866955.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:35.906Z,1478866955.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:36.261Z,1478866956.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:36.281Z,1478866956.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:36.649Z,1478866956.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:36.677Z,1478866956.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:37.044Z,1478866957.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:37.104Z,1478866957.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:37.457Z,1478866957.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:37.557Z,1478866957.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:37.861Z,1478866957.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:37.887Z,1478866957.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:38.263Z,1478866958.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:38.279Z,1478866958.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:38.664Z,1478866958.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:38.705Z,1478866958.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:39.060Z,1478866959.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:39.082Z,1478866959.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:39.473Z,1478866959.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:39.560Z,1478866959.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:39.841Z,1478866959.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:39.886Z,1478866959.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:40.248Z,1478866960.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:40.297Z,1478866960.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:40.657Z,1478866960.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:40.674Z,1478866960.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:41.056Z,1478866961.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:41.103Z,1478866961.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:41.444Z,1478866961.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:41.477Z,1478866961.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:41.853Z,1478866961.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:41.938Z,1478866961.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:42.246Z,1478866962.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:42.294Z,1478866962.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:42.645Z,1478866962.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:42.697Z,1478866962.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:43.062Z,1478866963.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:43.101Z,1478866963.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:43.460Z,1478866963.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:43.516Z,1478866963.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:43.880Z,1478866963.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:43.994Z,1478866963.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:44.261Z,1478866964.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:44.316Z,1478866964.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:44.653Z,1478866964.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:44.685Z,1478866964.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:45.057Z,1478866965.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:45.090Z,1478866965.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:45.452Z,1478866965.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:45.526Z,1478866965.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:45.844Z,1478866965.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:45.919Z,1478866965.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:46.252Z,1478866966.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:46.280Z,1478866966.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:46.649Z,1478866966.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:46.685Z,1478866966.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:47.045Z,1478866967.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:47.086Z,1478866967.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:47.497Z,1478866967.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:47.560Z,1478866967.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:47.851Z,1478866967.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:47.902Z,1478866967.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:48.260Z,1478866968.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:48.301Z,1478866968.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:48.668Z,1478866968.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:48.746Z,1478866968.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:49.054Z,1478866969.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:49.094Z,1478866969.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:49.462Z,1478866969.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:49.523Z,1478866969.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:49.854Z,1478866969.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:49.878Z,1478866969.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:50.251Z,1478866970.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:50.285Z,1478866970.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:50.653Z,1478866970.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:50.685Z,1478866970.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:51.044Z,1478866971.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:51.084Z,1478866971.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:51.449Z,1478866971.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:51.546Z,1478866971.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:51.848Z,1478866971.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:51.898Z,1478866971.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:52.251Z,1478866972.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:52.271Z,1478866972.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:52.646Z,1478866972.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:52.719Z,1478866972.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:53.062Z,1478866973.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:53.104Z,1478866973.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:53.466Z,1478866973.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:53.522Z,1478866973.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:53.857Z,1478866973.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:53.872Z,1478866973.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:54.246Z,1478866974.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:54.281Z,1478866974.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:54.646Z,1478866974.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:54.679Z,1478866974.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:58.252Z,1478866978.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:58.318Z,1478866978.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:58.440Z,1478866978.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:58.473Z,1478866978.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:58.790Z,1478866978.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:58.841Z,1478866978.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:59.195Z,1478866979.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:59.210Z,1478866979.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:59.590Z,1478866979.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:22:59.641Z,1478866979.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:22:59.989Z,1478866979.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:00.041Z,1478866980.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:00.390Z,1478866980.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:00.406Z,1478866980.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:00.794Z,1478866980.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:00.810Z,1478866980.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:01.193Z,1478866981.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:01.209Z,1478866981.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:01.590Z,1478866981.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:01.609Z,1478866981.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:01.993Z,1478866981.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:02.009Z,1478866982.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:02.393Z,1478866982.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:02.408Z,1478866982.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:02.793Z,1478866982.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:02.808Z,1478866982.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:03.189Z,1478866983.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:03.209Z,1478866983.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:03.608Z,1478866983.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:03.629Z,1478866983.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:04.004Z,1478866984.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:04.026Z,1478866984.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:04.387Z,1478866984.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:04.402Z,1478866984.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:04.793Z,1478866984.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:04.808Z,1478866984.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:05.194Z,1478866985.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:05.209Z,1478866985.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:05.593Z,1478866985.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:05.609Z,1478866985.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:05.989Z,1478866985.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:06.009Z,1478866986.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:06.394Z,1478866986.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:06.408Z,1478866986.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:06.790Z,1478866986.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:06.809Z,1478866986.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:07.193Z,1478866987.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:07.208Z,1478866987.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:07.590Z,1478866987.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:07.609Z,1478866987.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:08.008Z,1478866988.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:08.026Z,1478866988.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:08.404Z,1478866988.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:08.421Z,1478866988.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:08.794Z,1478866988.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:08.809Z,1478866988.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:09.194Z,1478866989.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:09.209Z,1478866989.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:09.589Z,1478866989.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:09.609Z,1478866989.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:10.030Z,1478866990.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:10.046Z,1478866990.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:10.394Z,1478866990.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:10.409Z,1478866990.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:10.793Z,1478866990.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:10.826Z,1478866990.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:11.190Z,1478866991.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:11.209Z,1478866991.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:11.594Z,1478866991.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:11.609Z,1478866991.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:11.989Z,1478866991.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:12.033Z,1478866992.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:12.407Z,1478866992.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:12.433Z,1478866992.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:12.800Z,1478866992.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:12.845Z,1478866992.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:13.208Z,1478866993.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:13.229Z,1478866993.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:13.604Z,1478866993.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:13.670Z,1478866993.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:13.993Z,1478866993.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:14.049Z,1478866994.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:14.393Z,1478866994.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:14.408Z,1478866994.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:14.794Z,1478866994.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:14.810Z,1478866994.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:15.193Z,1478866995.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:15.209Z,1478866995.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:15.589Z,1478866995.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:15.609Z,1478866995.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:15.993Z,1478866995.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:16.008Z,1478866996.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:16.394Z,1478866996.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:16.409Z,1478866996.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:16.793Z,1478866996.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:16.808Z,1478866996.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:17.204Z,1478866997.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:17.221Z,1478866997.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:17.604Z,1478866997.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:17.622Z,1478866997.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:18.008Z,1478866998.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:18.029Z,1478866998.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:18.408Z,1478866998.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:18.425Z,1478866998.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:18.788Z,1478866998.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:18.803Z,1478866998.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:19.193Z,1478866999.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:19.208Z,1478866999.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:19.594Z,1478866999.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:19.610Z,1478866999.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:19.993Z,1478866999.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:20.009Z,1478867000.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:20.393Z,1478867000.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:20.408Z,1478867000.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:20.794Z,1478867000.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:20.809Z,1478867000.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:21.193Z,1478867001.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:21.209Z,1478867001.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:21.589Z,1478867001.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:21.609Z,1478867001.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:22.008Z,1478867002.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:22.026Z,1478867002.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:22.404Z,1478867002.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:22.422Z,1478867002.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:22.808Z,1478867002.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:22.826Z,1478867002.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:23.224Z,1478867003.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:23.265Z,1478867003.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:23.589Z,1478867003.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:23.609Z,1478867003.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:23.993Z,1478867003.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:24.009Z,1478867004.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:24.392Z,1478867004.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:24.418Z,1478867004.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:24.791Z,1478867004.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:24.865Z,1478867004.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:25.190Z,1478867005.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:25.219Z,1478867005.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:25.590Z,1478867005.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:25.606Z,1478867005.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:25.990Z,1478867005.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:26.045Z,1478867006.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:26.390Z,1478867006.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:26.417Z,1478867006.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:26.790Z,1478867006.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:26.837Z,1478867006.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:27.205Z,1478867007.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:27.229Z,1478867007.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:27.600Z,1478867007.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:27.641Z,1478867007.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:27.990Z,1478867007.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:28.037Z,1478867008.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:28.390Z,1478867008.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:28.406Z,1478867008.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:28.804Z,1478867008.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:28.839Z,1478867008.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:29.201Z,1478867009.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:29.237Z,1478867009.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:29.590Z,1478867009.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:29.642Z,1478867009.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:29.989Z,1478867009.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:30.013Z,1478867010.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:30.390Z,1478867010.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:30.414Z,1478867010.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:30.790Z,1478867010.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:30.809Z,1478867010.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:31.222Z,1478867011.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:31.280Z,1478867011.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:31.601Z,1478867011.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:31.617Z,1478867011.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:32.001Z,1478867012.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:32.016Z,1478867012.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:32.401Z,1478867012.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:32.416Z,1478867012.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:32.790Z,1478867012.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:32.822Z,1478867012.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:33.190Z,1478867013.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:33.221Z,1478867013.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:33.597Z,1478867013.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:33.623Z,1478867013.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:33.990Z,1478867013.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:34.077Z,1478867014.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:34.389Z,1478867014.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:34.409Z,1478867014.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:34.800Z,1478867014.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:34.820Z,1478867014.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:35.198Z,1478867015.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:35.217Z,1478867015.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:35.598Z,1478867015.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:35.614Z,1478867015.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:35.992Z,1478867015.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:36.037Z,1478867016.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:36.398Z,1478867016.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:36.421Z,1478867016.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:36.802Z,1478867016.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:36.817Z,1478867016.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:37.196Z,1478867017.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:37.217Z,1478867017.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:37.612Z,1478867017.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:37.630Z,1478867017.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:38.009Z,1478867018.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:38.036Z,1478867018.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:38.389Z,1478867018.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:38.421Z,1478867018.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:38.676Z,1478867018.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:38.789Z,1478867018.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:38.849Z,1478867018.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:39.189Z,1478867019.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:39.222Z,1478867019.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:39.472Z,1478867019.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:39.593Z,1478867019.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:39.629Z,1478867019.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:39.994Z,1478867019.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:40.041Z,1478867020.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:40.392Z,1478867020.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:40.417Z,1478867020.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:40.797Z,1478867020.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:40.856Z,1478867020.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:41.192Z,1478867021.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:41.230Z,1478867021.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:41.589Z,1478867021.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:41.657Z,1478867021.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:42.008Z,1478867022.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:42.065Z,1478867022.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:42.408Z,1478867022.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:42.463Z,1478867022.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:42.789Z,1478867022.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:42.845Z,1478867022.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:43.189Z,1478867023.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:43.237Z,1478867023.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:43.589Z,1478867023.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:43.637Z,1478867023.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:43.989Z,1478867023.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:44.009Z,1478867024.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:44.393Z,1478867024.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:44.413Z,1478867024.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:44.793Z,1478867024.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:44.808Z,1478867024.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:45.194Z,1478867025.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:45.210Z,1478867025.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:45.601Z,1478867025.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:45.621Z,1478867025.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:46.004Z,1478867026.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:46.019Z,1478867026.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:46.404Z,1478867026.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:46.433Z,1478867026.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:46.789Z,1478867026.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:46.835Z,1478867026.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:47.189Z,1478867027.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:47.246Z,1478867027.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:47.598Z,1478867027.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:47.613Z,1478867027.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:47.993Z,1478867027.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:48.020Z,1478867028.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:48.389Z,1478867028.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:48.426Z,1478867028.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:48.789Z,1478867028.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:48.816Z,1478867028.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:49.189Z,1478867029.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:49.215Z,1478867029.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:49.589Z,1478867029.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:49.609Z,1478867029.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:49.997Z,1478867029.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:50.013Z,1478867030.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:50.407Z,1478867030.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:50.441Z,1478867030.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:50.804Z,1478867030.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:50.844Z,1478867030.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:51.193Z,1478867031.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:51.215Z,1478867031.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:51.604Z,1478867031.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:51.619Z,1478867031.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:52.001Z,1478867032.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:52.017Z,1478867032.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:52.389Z,1478867032.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:52.421Z,1478867032.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:52.800Z,1478867032.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:52.821Z,1478867032.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:53.189Z,1478867033.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:53.234Z,1478867033.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:53.601Z,1478867033.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:53.625Z,1478867033.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:54.004Z,1478867034.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:54.045Z,1478867034.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:54.390Z,1478867034.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:54.417Z,1478867034.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:54.805Z,1478867034.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:54.867Z,1478867034.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:58.232Z,1478867038.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:58.248Z,1478867038.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:58.352Z,1478867038.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:58.409Z,1478867038.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:58.725Z,1478867038.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:58.780Z,1478867038.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:59.144Z,1478867039.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:59.165Z,1478867039.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:59.536Z,1478867039.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:59.567Z,1478867039.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:23:59.929Z,1478867039.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:23:59.965Z,1478867039.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:00.325Z,1478867040.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:00.345Z,1478867040.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:00.725Z,1478867040.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:00.745Z,1478867040.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:01.129Z,1478867041.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:01.149Z,1478867041.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:01.533Z,1478867041.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:01.553Z,1478867041.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:01.928Z,1478867041.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:01.943Z,1478867041.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:02.332Z,1478867042.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:02.347Z,1478867042.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:02.729Z,1478867042.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:02.744Z,1478867042.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:03.125Z,1478867043.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:03.147Z,1478867043.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:03.540Z,1478867043.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:03.561Z,1478867043.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:03.930Z,1478867043.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:03.953Z,1478867043.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:04.321Z,1478867044.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:04.353Z,1478867044.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:04.729Z,1478867044.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:04.751Z,1478867044.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:05.134Z,1478867045.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:05.149Z,1478867045.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:05.537Z,1478867045.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:05.557Z,1478867045.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:05.933Z,1478867045.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:05.962Z,1478867045.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:06.322Z,1478867046.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:06.353Z,1478867046.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:06.725Z,1478867046.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:06.751Z,1478867046.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:07.129Z,1478867047.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:07.157Z,1478867047.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:07.522Z,1478867047.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:07.537Z,1478867047.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:07.933Z,1478867047.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:07.967Z,1478867047.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:08.333Z,1478867048.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:08.367Z,1478867048.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:08.730Z,1478867048.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:08.745Z,1478867048.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:09.130Z,1478867049.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:09.146Z,1478867049.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:09.530Z,1478867049.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:09.581Z,1478867049.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:09.929Z,1478867049.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:09.956Z,1478867049.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:10.325Z,1478867050.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:10.357Z,1478867050.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:10.725Z,1478867050.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:10.777Z,1478867050.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:11.129Z,1478867051.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:11.146Z,1478867051.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:11.521Z,1478867051.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:11.548Z,1478867051.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:11.921Z,1478867051.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:11.975Z,1478867051.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:12.329Z,1478867052.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:12.346Z,1478867052.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:12.724Z,1478867052.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:12.776Z,1478867052.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:13.114Z,1478867053.114 [NAL9602](INFO): SBD MO Status=2, MOMSN=345, MT Status=2, MTMSN=0
2016-11-11T12:24:13.114Z,1478867053.114 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T12:24:13.140Z,1478867053.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:13.193Z,1478867053.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:13.540Z,1478867053.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:13.571Z,1478867053.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:13.921Z,1478867053.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:13.953Z,1478867053.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:14.321Z,1478867054.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:14.353Z,1478867054.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:14.721Z,1478867054.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:14.760Z,1478867054.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:15.121Z,1478867055.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:15.153Z,1478867055.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:15.529Z,1478867055.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:15.555Z,1478867055.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:15.926Z,1478867055.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:15.962Z,1478867055.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:16.321Z,1478867056.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:16.357Z,1478867056.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:16.725Z,1478867056.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:16.761Z,1478867056.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:17.121Z,1478867057.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:17.166Z,1478867057.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:17.536Z,1478867057.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:17.573Z,1478867057.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:17.941Z,1478867057.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:17.975Z,1478867057.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:18.328Z,1478867058.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:18.343Z,1478867058.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:18.726Z,1478867058.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:18.746Z,1478867058.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:19.131Z,1478867059.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:19.147Z,1478867059.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:19.537Z,1478867059.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:19.553Z,1478867059.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:19.924Z,1478867059.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:19.956Z,1478867059.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:20.337Z,1478867060.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:20.354Z,1478867060.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:20.743Z,1478867060.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:20.762Z,1478867060.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:21.121Z,1478867061.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:21.158Z,1478867061.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:21.521Z,1478867061.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:21.553Z,1478867061.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:21.929Z,1478867061.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:21.961Z,1478867061.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:22.321Z,1478867062.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:22.358Z,1478867062.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:22.729Z,1478867062.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:22.755Z,1478867062.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:23.130Z,1478867063.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:23.165Z,1478867063.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:23.525Z,1478867063.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:23.581Z,1478867063.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:23.937Z,1478867063.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:23.987Z,1478867063.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:24.325Z,1478867064.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:24.345Z,1478867064.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:24.725Z,1478867064.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:24.740Z,1478867064.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:25.129Z,1478867065.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:25.149Z,1478867065.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:25.528Z,1478867065.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:25.589Z,1478867065.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:25.921Z,1478867065.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:25.953Z,1478867065.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:26.332Z,1478867066.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:26.391Z,1478867066.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:26.721Z,1478867066.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:26.756Z,1478867066.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:27.121Z,1478867067.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:27.186Z,1478867067.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:27.529Z,1478867067.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:27.594Z,1478867067.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:27.926Z,1478867067.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:27.963Z,1478867067.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:28.321Z,1478867068.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:28.358Z,1478867068.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:28.725Z,1478867068.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:28.757Z,1478867068.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:29.121Z,1478867069.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:29.157Z,1478867069.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:29.521Z,1478867069.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:29.541Z,1478867069.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:29.925Z,1478867069.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:29.945Z,1478867069.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:30.329Z,1478867070.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:30.344Z,1478867070.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:30.727Z,1478867070.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:30.743Z,1478867070.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:31.132Z,1478867071.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:31.147Z,1478867071.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:31.529Z,1478867071.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:31.549Z,1478867071.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:31.906Z,1478867071.906 [NAL9602](INFO): SBD MO Status=0, MOMSN=345, MT Status=0, MTMSN=0
2016-11-11T12:24:31.906Z,1478867071.906 [NAL9602](INFO): No messages in MT queue
2016-11-11T12:24:31.927Z,1478867071.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:31.963Z,1478867071.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:32.321Z,1478867072.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:32.354Z,1478867072.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:32.743Z,1478867072.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:32.759Z,1478867072.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:33.144Z,1478867073.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:33.160Z,1478867073.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:33.547Z,1478867073.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:33.563Z,1478867073.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:33.922Z,1478867073.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:33.961Z,1478867073.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:34.321Z,1478867074.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:34.341Z,1478867074.341 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:34.341Z,1478867074.341 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 132
2016-11-11T12:24:34.341Z,1478867074.341 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:24:34.364Z,1478867074.364 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:34.364Z,1478867074.365 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 132
2016-11-11T12:24:34.364Z,1478867074.365 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:24:34.367Z,1478867074.367 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:34.367Z,1478867074.367 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 132
2016-11-11T12:24:34.367Z,1478867074.367 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:24:34.398Z,1478867074.398 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:24:34.398Z,1478867074.398 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:24:34.398Z,1478867074.398 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:24:34.725Z,1478867074.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:34.782Z,1478867074.782 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:24:34.782Z,1478867074.782 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 132
2016-11-11T12:24:34.787Z,1478867074.787 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:24:34.788Z,1478867074.787 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 132
2016-11-11T12:24:34.788Z,1478867074.788 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:24:34.788Z,1478867074.788 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 132
2016-11-11T12:24:35.121Z,1478867075.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:35.152Z,1478867075.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:24:35.153Z,1478867075.153 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:24:35.153Z,1478867075.153 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:24:35.158Z,1478867075.158 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:24:35.158Z,1478867075.158 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:24:35.159Z,1478867075.158 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:24:35.159Z,1478867075.159 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:24:35.159Z,1478867075.159 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:24:35.160Z,1478867075.160 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:24:35.547Z,1478867075.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:35.564Z,1478867075.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:35.951Z,1478867075.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:35.967Z,1478867075.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:36.336Z,1478867076.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:36.369Z,1478867076.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:36.737Z,1478867076.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:36.760Z,1478867076.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:37.134Z,1478867077.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:37.168Z,1478867077.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:37.529Z,1478867077.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:37.572Z,1478867077.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:37.932Z,1478867077.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:37.988Z,1478867077.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:38.344Z,1478867078.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:38.369Z,1478867078.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:38.740Z,1478867078.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:38.776Z,1478867078.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:39.124Z,1478867079.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:39.148Z,1478867079.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:39.529Z,1478867079.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:39.589Z,1478867079.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:39.923Z,1478867079.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:39.961Z,1478867079.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:40.326Z,1478867080.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:40.347Z,1478867080.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:40.742Z,1478867080.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:40.793Z,1478867080.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:41.144Z,1478867081.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:41.159Z,1478867081.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:41.532Z,1478867081.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:41.581Z,1478867081.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:41.925Z,1478867081.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:41.975Z,1478867081.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:42.329Z,1478867082.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:42.344Z,1478867082.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:42.730Z,1478867082.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:42.746Z,1478867082.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:43.131Z,1478867083.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:43.146Z,1478867083.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:43.521Z,1478867083.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:43.558Z,1478867083.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:43.936Z,1478867083.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:43.962Z,1478867083.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:44.348Z,1478867084.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:44.369Z,1478867084.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:44.736Z,1478867084.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:44.765Z,1478867084.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:45.121Z,1478867085.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:45.162Z,1478867085.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:45.533Z,1478867085.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:45.567Z,1478867085.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:45.930Z,1478867085.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:45.955Z,1478867085.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:46.323Z,1478867086.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:46.347Z,1478867086.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:46.735Z,1478867086.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:46.750Z,1478867086.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:47.139Z,1478867087.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:47.161Z,1478867087.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:47.539Z,1478867087.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:47.554Z,1478867087.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:47.929Z,1478867087.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:47.949Z,1478867087.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:48.321Z,1478867088.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:48.357Z,1478867088.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:48.721Z,1478867088.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:48.757Z,1478867088.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:49.122Z,1478867089.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:49.149Z,1478867089.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:49.521Z,1478867089.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:49.548Z,1478867089.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:49.940Z,1478867089.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:49.956Z,1478867089.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:50.343Z,1478867090.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:50.358Z,1478867090.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:50.736Z,1478867090.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:50.778Z,1478867090.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:51.121Z,1478867091.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:51.162Z,1478867091.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:51.526Z,1478867091.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:51.560Z,1478867091.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:51.923Z,1478867091.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:51.949Z,1478867091.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:52.324Z,1478867092.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:52.385Z,1478867092.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:52.738Z,1478867092.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:52.754Z,1478867092.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:53.144Z,1478867093.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:53.165Z,1478867093.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:53.536Z,1478867093.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:53.552Z,1478867093.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:53.932Z,1478867093.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:53.985Z,1478867093.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:54.329Z,1478867094.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:54.349Z,1478867094.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:54.358Z,1478867094.358 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T12:19:54.1Z
2016-11-11T12:24:54.358Z,1478867094.358 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T12:24:54.358Z,1478867094.358 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T12:24:54.721Z,1478867094.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:54.753Z,1478867094.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:55.658Z,1478867095.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:55.705Z,1478867095.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:58.800Z,1478867098.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:58.821Z,1478867098.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:58.881Z,1478867098.881 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0176.lzma
2016-11-11T12:24:58.927Z,1478867098.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:58.985Z,1478867098.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:59.315Z,1478867099.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:59.361Z,1478867099.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:24:59.673Z,1478867099.673 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0176.lzma.bak
2016-11-11T12:24:59.673Z,1478867099.673 [DataOverHttps](INFO): SBD MOMSN=4555400
2016-11-11T12:24:59.709Z,1478867099.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:24:59.733Z,1478867099.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:00.960Z,1478867100.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:00.975Z,1478867100.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:01.078Z,1478867101.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:01.114Z,1478867101.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:04.611Z,1478867104.611 [NAL9602](INFO): Powering down
2016-11-11T12:25:04.630Z,1478867104.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:04.646Z,1478867104.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:04.761Z,1478867104.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:04.794Z,1478867104.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:05.141Z,1478867105.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:05.156Z,1478867105.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:05.543Z,1478867105.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:05.558Z,1478867105.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:05.944Z,1478867105.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:05.960Z,1478867105.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:06.346Z,1478867106.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:06.367Z,1478867106.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:09.961Z,1478867109.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:10.031Z,1478867110.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:10.092Z,1478867110.092 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20161111T044527/Express0177.lzma
2016-11-11T12:25:10.127Z,1478867110.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:10.147Z,1478867110.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:10.519Z,1478867110.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:10.541Z,1478867110.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:10.893Z,1478867110.893 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0177.lzma.bak
2016-11-11T12:25:10.893Z,1478867110.893 [DataOverHttps](INFO): SBD MOMSN=4555402
2016-11-11T12:25:10.933Z,1478867110.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:10.948Z,1478867110.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:12.177Z,1478867112.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:12.237Z,1478867112.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:12.250Z,1478867112.250 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T12:25:12.250Z,1478867112.250 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T12:25:12.250Z,1478867112.250 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T12:25:12.336Z,1478867112.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:12.370Z,1478867112.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:15.841Z,1478867115.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:15.893Z,1478867115.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:15.994Z,1478867115.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:16.018Z,1478867116.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:16.349Z,1478867116.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:16.399Z,1478867116.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:16.750Z,1478867116.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:16.802Z,1478867116.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:17.153Z,1478867117.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:17.171Z,1478867117.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:17.553Z,1478867117.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:17.572Z,1478867117.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:17.955Z,1478867117.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:17.984Z,1478867117.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:18.349Z,1478867118.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:18.387Z,1478867118.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:18.745Z,1478867118.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:18.760Z,1478867118.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:19.145Z,1478867119.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:19.169Z,1478867119.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:19.553Z,1478867119.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:19.569Z,1478867119.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:19.945Z,1478867119.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:19.982Z,1478867119.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:20.345Z,1478867120.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:20.369Z,1478867120.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:20.758Z,1478867120.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:20.774Z,1478867120.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:21.178Z,1478867121.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:21.230Z,1478867121.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:21.545Z,1478867121.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:21.589Z,1478867121.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:21.953Z,1478867121.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:22.017Z,1478867122.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:22.350Z,1478867122.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:22.394Z,1478867122.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:22.748Z,1478867122.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:22.784Z,1478867122.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:23.180Z,1478867123.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:23.241Z,1478867123.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:23.549Z,1478867123.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:23.582Z,1478867123.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:23.945Z,1478867123.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:23.989Z,1478867123.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:24.356Z,1478867124.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:24.386Z,1478867124.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:24.749Z,1478867124.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:24.785Z,1478867124.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:25.205Z,1478867125.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:25.254Z,1478867125.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:25.551Z,1478867125.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:25.583Z,1478867125.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:25.951Z,1478867125.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:25.989Z,1478867125.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:26.353Z,1478867126.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:26.379Z,1478867126.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:26.749Z,1478867126.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:26.774Z,1478867126.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:27.181Z,1478867127.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:27.230Z,1478867127.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:27.561Z,1478867127.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:27.576Z,1478867127.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:27.946Z,1478867127.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:27.989Z,1478867127.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:28.350Z,1478867128.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:28.370Z,1478867128.371 [PNI_TCM](ERROR): CRC does not match. Expected:0x14138 got:0x49150
2016-11-11T12:25:28.390Z,1478867128.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:28.412Z,1478867128.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:28.748Z,1478867128.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:28.809Z,1478867128.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:29.148Z,1478867129.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:29.189Z,1478867129.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:29.208Z,1478867129.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:29.549Z,1478867129.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:29.605Z,1478867129.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:29.664Z,1478867129.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:29.954Z,1478867129.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:29.976Z,1478867129.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.371300 seconds old.
2016-11-11T12:25:29.977Z,1478867129.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:29.978Z,1478867129.978 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.371700 seconds old.
2016-11-11T12:25:30.009Z,1478867130.009 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.400000 seconds old.
2016-11-11T12:25:30.011Z,1478867130.011 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.400700 seconds old.
2016-11-11T12:25:30.013Z,1478867130.013 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.401100 seconds old.
2016-11-11T12:25:30.354Z,1478867130.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:30.400Z,1478867130.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.795400 seconds old.
2016-11-11T12:25:30.401Z,1478867130.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:30.402Z,1478867130.402 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.795800 seconds old.
2016-11-11T12:25:30.409Z,1478867130.409 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.800300 seconds old.
2016-11-11T12:25:30.412Z,1478867130.411 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.801100 seconds old.
2016-11-11T12:25:30.413Z,1478867130.413 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.801500 seconds old.
2016-11-11T12:25:30.460Z,1478867130.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:30.757Z,1478867130.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:30.780Z,1478867130.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.175300 seconds old.
2016-11-11T12:25:30.781Z,1478867130.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:30.782Z,1478867130.782 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.175800 seconds old.
2016-11-11T12:25:30.785Z,1478867130.785 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.176200 seconds old.
2016-11-11T12:25:30.811Z,1478867130.811 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.176700 seconds old.
2016-11-11T12:25:30.813Z,1478867130.813 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.201400 seconds old.
2016-11-11T12:25:31.152Z,1478867131.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:31.212Z,1478867131.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.607500 seconds old.
2016-11-11T12:25:31.213Z,1478867131.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:31.214Z,1478867131.214 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.607900 seconds old.
2016-11-11T12:25:31.216Z,1478867131.217 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.608100 seconds old.
2016-11-11T12:25:31.219Z,1478867131.219 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.608500 seconds old.
2016-11-11T12:25:31.221Z,1478867131.220 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.609100 seconds old.
2016-11-11T12:25:31.256Z,1478867131.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:31.555Z,1478867131.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:31.570Z,1478867131.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.966000 seconds old.
2016-11-11T12:25:31.572Z,1478867131.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:31.573Z,1478867131.573 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.966600 seconds old.
2016-11-11T12:25:31.575Z,1478867131.575 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.966700 seconds old.
2016-11-11T12:25:31.578Z,1478867131.578 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.967500 seconds old.
2016-11-11T12:25:31.636Z,1478867131.636 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 2.024200 seconds old.
2016-11-11T12:25:31.955Z,1478867131.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:31.988Z,1478867131.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.384200 seconds old.
2016-11-11T12:25:31.990Z,1478867131.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:31.991Z,1478867131.991 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.384600 seconds old.
2016-11-11T12:25:31.993Z,1478867131.993 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 2.384700 seconds old.
2016-11-11T12:25:31.996Z,1478867131.996 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.385200 seconds old.
2016-11-11T12:25:31.997Z,1478867131.997 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 2.385500 seconds old.
2016-11-11T12:25:32.026Z,1478867132.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:32.346Z,1478867132.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:32.391Z,1478867132.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.787100 seconds old.
2016-11-11T12:25:32.393Z,1478867132.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:32.394Z,1478867132.394 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.787600 seconds old.
2016-11-11T12:25:32.396Z,1478867132.396 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 2.787900 seconds old.
2016-11-11T12:25:32.399Z,1478867132.399 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.788400 seconds old.
2016-11-11T12:25:32.400Z,1478867132.400 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 2.788900 seconds old.
2016-11-11T12:25:32.745Z,1478867132.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:32.788Z,1478867132.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.183200 seconds old.
2016-11-11T12:25:32.789Z,1478867132.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:32.790Z,1478867132.790 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.183700 seconds old.
2016-11-11T12:25:32.797Z,1478867132.796 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 3.188100 seconds old.
2016-11-11T12:25:32.803Z,1478867132.803 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.188700 seconds old.
2016-11-11T12:25:32.805Z,1478867132.805 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 3.193300 seconds old.
2016-11-11T12:25:32.820Z,1478867132.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:33.151Z,1478867133.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:33.165Z,1478867133.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.561100 seconds old.
2016-11-11T12:25:33.167Z,1478867133.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:33.168Z,1478867133.168 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.561600 seconds old.
2016-11-11T12:25:33.170Z,1478867133.170 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 3.561900 seconds old.
2016-11-11T12:25:33.189Z,1478867133.189 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.578600 seconds old.
2016-11-11T12:25:33.190Z,1478867133.190 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 3.578900 seconds old.
2016-11-11T12:25:33.555Z,1478867133.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:33.611Z,1478867133.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.006100 seconds old.
2016-11-11T12:25:33.613Z,1478867133.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:33.627Z,1478867133.627 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.020900 seconds old.
2016-11-11T12:25:33.636Z,1478867133.636 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 4.027300 seconds old.
2016-11-11T12:25:33.648Z,1478867133.648 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.037400 seconds old.
2016-11-11T12:25:33.649Z,1478867133.649 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 4.037800 seconds old.
2016-11-11T12:25:33.946Z,1478867133.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:33.969Z,1478867133.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.364400 seconds old.
2016-11-11T12:25:33.970Z,1478867133.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:33.975Z,1478867133.975 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.364800 seconds old.
2016-11-11T12:25:33.978Z,1478867133.978 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 4.369200 seconds old.
2016-11-11T12:25:33.984Z,1478867133.984 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.374100 seconds old.
2016-11-11T12:25:33.986Z,1478867133.986 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 4.374500 seconds old.
2016-11-11T12:25:34.353Z,1478867134.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:34.369Z,1478867134.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.764500 seconds old.
2016-11-11T12:25:34.370Z,1478867134.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:34.371Z,1478867134.371 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.764900 seconds old.
2016-11-11T12:25:34.374Z,1478867134.374 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 4.765200 seconds old.
2016-11-11T12:25:34.376Z,1478867134.376 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.765700 seconds old.
2016-11-11T12:25:34.377Z,1478867134.377 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 4.766000 seconds old.
2016-11-11T12:25:34.756Z,1478867134.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:34.769Z,1478867134.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.165000 seconds old.
2016-11-11T12:25:34.771Z,1478867134.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:34.772Z,1478867134.772 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.165400 seconds old.
2016-11-11T12:25:34.774Z,1478867134.774 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 5.165500 seconds old.
2016-11-11T12:25:34.776Z,1478867134.776 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.166000 seconds old.
2016-11-11T12:25:34.778Z,1478867134.778 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 5.166300 seconds old.
2016-11-11T12:25:35.171Z,1478867135.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:35.198Z,1478867135.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.594100 seconds old.
2016-11-11T12:25:35.225Z,1478867135.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:35.226Z,1478867135.226 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.620300 seconds old.
2016-11-11T12:25:35.237Z,1478867135.237 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 5.628800 seconds old.
2016-11-11T12:25:35.256Z,1478867135.256 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.645600 seconds old.
2016-11-11T12:25:35.257Z,1478867135.257 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 5.646000 seconds old.
2016-11-11T12:25:35.549Z,1478867135.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:35.580Z,1478867135.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.975300 seconds old.
2016-11-11T12:25:35.581Z,1478867135.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:35.582Z,1478867135.582 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.975700 seconds old.
2016-11-11T12:25:35.584Z,1478867135.584 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 5.976000 seconds old.
2016-11-11T12:25:35.587Z,1478867135.587 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.976400 seconds old.
2016-11-11T12:25:35.588Z,1478867135.588 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 5.976800 seconds old.
2016-11-11T12:25:35.945Z,1478867135.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:35.972Z,1478867135.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.367800 seconds old.
2016-11-11T12:25:35.973Z,1478867135.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:35.974Z,1478867135.974 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.368200 seconds old.
2016-11-11T12:25:35.977Z,1478867135.977 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 6.368300 seconds old.
2016-11-11T12:25:35.979Z,1478867135.979 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.368700 seconds old.
2016-11-11T12:25:35.981Z,1478867135.981 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 6.369300 seconds old.
2016-11-11T12:25:36.347Z,1478867136.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:36.369Z,1478867136.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.764900 seconds old.
2016-11-11T12:25:36.370Z,1478867136.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:36.372Z,1478867136.372 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.765500 seconds old.
2016-11-11T12:25:36.374Z,1478867136.374 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 6.765600 seconds old.
2016-11-11T12:25:36.377Z,1478867136.377 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.766200 seconds old.
2016-11-11T12:25:36.378Z,1478867136.378 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 6.766600 seconds old.
2016-11-11T12:25:36.747Z,1478867136.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:36.783Z,1478867136.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.178800 seconds old.
2016-11-11T12:25:36.784Z,1478867136.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:36.785Z,1478867136.785 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.179300 seconds old.
2016-11-11T12:25:36.788Z,1478867136.788 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 7.179400 seconds old.
2016-11-11T12:25:36.790Z,1478867136.790 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.179800 seconds old.
2016-11-11T12:25:36.792Z,1478867136.792 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 7.180200 seconds old.
2016-11-11T12:25:37.155Z,1478867137.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:37.187Z,1478867137.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.583200 seconds old.
2016-11-11T12:25:37.189Z,1478867137.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:37.190Z,1478867137.190 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.583600 seconds old.
2016-11-11T12:25:37.200Z,1478867137.200 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 7.591200 seconds old.
2016-11-11T12:25:37.202Z,1478867137.202 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.591900 seconds old.
2016-11-11T12:25:37.214Z,1478867137.214 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 7.602700 seconds old.
2016-11-11T12:25:37.546Z,1478867137.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:37.562Z,1478867137.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.958200 seconds old.
2016-11-11T12:25:37.564Z,1478867137.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:37.565Z,1478867137.565 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.958800 seconds old.
2016-11-11T12:25:37.568Z,1478867137.568 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 7.959200 seconds old.
2016-11-11T12:25:37.570Z,1478867137.570 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.959600 seconds old.
2016-11-11T12:25:37.572Z,1478867137.572 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 7.960100 seconds old.
2016-11-11T12:25:37.955Z,1478867137.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:37.969Z,1478867137.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.364900 seconds old.
2016-11-11T12:25:37.970Z,1478867137.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:37.971Z,1478867137.971 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.365300 seconds old.
2016-11-11T12:25:37.974Z,1478867137.974 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 8.365400 seconds old.
2016-11-11T12:25:37.976Z,1478867137.976 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.365900 seconds old.
2016-11-11T12:25:37.978Z,1478867137.978 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 8.366200 seconds old.
2016-11-11T12:25:38.353Z,1478867138.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:38.371Z,1478867138.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.767200 seconds old.
2016-11-11T12:25:38.373Z,1478867138.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:38.374Z,1478867138.374 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.767700 seconds old.
2016-11-11T12:25:38.376Z,1478867138.376 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 8.767800 seconds old.
2016-11-11T12:25:38.379Z,1478867138.379 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.768300 seconds old.
2016-11-11T12:25:38.380Z,1478867138.380 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 8.768800 seconds old.
2016-11-11T12:25:38.752Z,1478867138.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:38.766Z,1478867138.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.162100 seconds old.
2016-11-11T12:25:38.768Z,1478867138.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:38.769Z,1478867138.769 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.162700 seconds old.
2016-11-11T12:25:38.771Z,1478867138.772 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 9.163000 seconds old.
2016-11-11T12:25:38.774Z,1478867138.774 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.163500 seconds old.
2016-11-11T12:25:38.775Z,1478867138.776 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 9.164100 seconds old.
2016-11-11T12:25:39.173Z,1478867139.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:39.200Z,1478867139.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.595400 seconds old.
2016-11-11T12:25:39.201Z,1478867139.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:39.202Z,1478867139.202 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.595800 seconds old.
2016-11-11T12:25:39.216Z,1478867139.216 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 9.607400 seconds old.
2016-11-11T12:25:39.218Z,1478867139.218 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.608100 seconds old.
2016-11-11T12:25:39.228Z,1478867139.228 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 9.616900 seconds old.
2016-11-11T12:25:39.547Z,1478867139.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:39.579Z,1478867139.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.974700 seconds old.
2016-11-11T12:25:39.580Z,1478867139.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:39.581Z,1478867139.581 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.975200 seconds old.
2016-11-11T12:25:39.584Z,1478867139.584 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 9.975700 seconds old.
2016-11-11T12:25:39.587Z,1478867139.587 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.976200 seconds old.
2016-11-11T12:25:39.588Z,1478867139.588 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 9.976600 seconds old.
2016-11-11T12:25:39.956Z,1478867139.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:39.970Z,1478867139.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.366000 seconds old.
2016-11-11T12:25:39.972Z,1478867139.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:39.973Z,1478867139.973 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.366700 seconds old.
2016-11-11T12:25:39.975Z,1478867139.975 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 10.366900 seconds old.
2016-11-11T12:25:39.978Z,1478867139.978 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.367500 seconds old.
2016-11-11T12:25:39.979Z,1478867139.980 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 10.368000 seconds old.
2016-11-11T12:25:40.360Z,1478867140.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:40.378Z,1478867140.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.774000 seconds old.
2016-11-11T12:25:40.380Z,1478867140.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:40.381Z,1478867140.381 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.774600 seconds old.
2016-11-11T12:25:40.383Z,1478867140.383 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 10.774700 seconds old.
2016-11-11T12:25:40.386Z,1478867140.386 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.775500 seconds old.
2016-11-11T12:25:40.387Z,1478867140.388 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 10.776000 seconds old.
2016-11-11T12:25:40.747Z,1478867140.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:40.779Z,1478867140.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.175100 seconds old.
2016-11-11T12:25:40.781Z,1478867140.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:40.782Z,1478867140.782 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.175500 seconds old.
2016-11-11T12:25:40.784Z,1478867140.784 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 11.175900 seconds old.
2016-11-11T12:25:40.787Z,1478867140.787 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.176400 seconds old.
2016-11-11T12:25:40.788Z,1478867140.788 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 11.177000 seconds old.
2016-11-11T12:25:41.155Z,1478867141.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:41.196Z,1478867141.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.591900 seconds old.
2016-11-11T12:25:41.198Z,1478867141.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:41.199Z,1478867141.199 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.592400 seconds old.
2016-11-11T12:25:41.205Z,1478867141.205 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 11.597000 seconds old.
2016-11-11T12:25:41.225Z,1478867141.225 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.614700 seconds old.
2016-11-11T12:25:41.227Z,1478867141.227 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 11.615200 seconds old.
2016-11-11T12:25:41.553Z,1478867141.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:41.567Z,1478867141.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.962500 seconds old.
2016-11-11T12:25:41.568Z,1478867141.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:41.569Z,1478867141.569 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.963200 seconds old.
2016-11-11T12:25:41.592Z,1478867141.592 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 11.983700 seconds old.
2016-11-11T12:25:41.595Z,1478867141.595 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.984500 seconds old.
2016-11-11T12:25:41.601Z,1478867141.601 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 11.989200 seconds old.
2016-11-11T12:25:41.952Z,1478867141.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:41.966Z,1478867141.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 12.361300 seconds old.
2016-11-11T12:25:41.967Z,1478867141.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:41.968Z,1478867141.968 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.361900 seconds old.
2016-11-11T12:25:41.971Z,1478867141.971 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 12.362200 seconds old.
2016-11-11T12:25:41.973Z,1478867141.973 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.362700 seconds old.
2016-11-11T12:25:41.975Z,1478867141.975 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 12.363100 seconds old.
2016-11-11T12:25:42.350Z,1478867142.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:42.384Z,1478867142.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 12.779600 seconds old.
2016-11-11T12:25:42.385Z,1478867142.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:42.386Z,1478867142.386 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.780100 seconds old.
2016-11-11T12:25:42.393Z,1478867142.393 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 12.784500 seconds old.
2016-11-11T12:25:42.396Z,1478867142.396 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.785300 seconds old.
2016-11-11T12:25:42.397Z,1478867142.397 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 12.785700 seconds old.
2016-11-11T12:25:42.747Z,1478867142.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:42.781Z,1478867142.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 13.177000 seconds old.
2016-11-11T12:25:42.783Z,1478867142.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:42.784Z,1478867142.784 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.177700 seconds old.
2016-11-11T12:25:42.786Z,1478867142.786 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 13.177900 seconds old.
2016-11-11T12:25:42.797Z,1478867142.797 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.186700 seconds old.
2016-11-11T12:25:42.799Z,1478867142.799 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 13.187100 seconds old.
2016-11-11T12:25:43.145Z,1478867143.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:43.254Z,1478867143.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 13.649400 seconds old.
2016-11-11T12:25:43.264Z,1478867143.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:43.266Z,1478867143.266 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.659600 seconds old.
2016-11-11T12:25:43.280Z,1478867143.280 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 13.671300 seconds old.
2016-11-11T12:25:43.282Z,1478867143.283 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.672100 seconds old.
2016-11-11T12:25:43.292Z,1478867143.292 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 13.680900 seconds old.
2016-11-11T12:25:43.552Z,1478867143.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:43.566Z,1478867143.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 13.961400 seconds old.
2016-11-11T12:25:43.567Z,1478867143.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:43.568Z,1478867143.568 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.962100 seconds old.
2016-11-11T12:25:43.571Z,1478867143.571 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 13.962400 seconds old.
2016-11-11T12:25:43.573Z,1478867143.573 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.963100 seconds old.
2016-11-11T12:25:43.575Z,1478867143.575 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 13.963500 seconds old.
2016-11-11T12:25:43.954Z,1478867143.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:43.975Z,1478867143.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 14.371100 seconds old.
2016-11-11T12:25:43.977Z,1478867143.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:43.978Z,1478867143.978 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 14.371500 seconds old.
2016-11-11T12:25:43.980Z,1478867143.980 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 14.371700 seconds old.
2016-11-11T12:25:43.983Z,1478867143.983 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 14.372200 seconds old.
2016-11-11T12:25:43.984Z,1478867143.984 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 14.372800 seconds old.
2016-11-11T12:25:44.354Z,1478867144.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:44.409Z,1478867144.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 14.805000 seconds old.
2016-11-11T12:25:44.411Z,1478867144.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:44.412Z,1478867144.412 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 14.805600 seconds old.
2016-11-11T12:25:44.414Z,1478867144.414 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 14.805800 seconds old.
2016-11-11T12:25:44.417Z,1478867144.417 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 14.806400 seconds old.
2016-11-11T12:25:44.418Z,1478867144.418 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 14.806700 seconds old.
2016-11-11T12:25:44.753Z,1478867144.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:44.767Z,1478867144.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 15.162700 seconds old.
2016-11-11T12:25:44.768Z,1478867144.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:44.770Z,1478867144.770 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.163400 seconds old.
2016-11-11T12:25:44.772Z,1478867144.772 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 15.163700 seconds old.
2016-11-11T12:25:44.775Z,1478867144.774 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 15.164200 seconds old.
2016-11-11T12:25:44.776Z,1478867144.776 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 15.164700 seconds old.
2016-11-11T12:25:45.160Z,1478867145.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:45.212Z,1478867145.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 15.608000 seconds old.
2016-11-11T12:25:45.214Z,1478867145.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:45.215Z,1478867145.215 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.608500 seconds old.
2016-11-11T12:25:45.226Z,1478867145.226 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 15.617200 seconds old.
2016-11-11T12:25:45.228Z,1478867145.228 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 15.618000 seconds old.
2016-11-11T12:25:45.230Z,1478867145.230 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 15.618400 seconds old.
2016-11-11T12:25:45.547Z,1478867145.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:45.628Z,1478867145.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 16.023800 seconds old.
2016-11-11T12:25:45.629Z,1478867145.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:45.630Z,1478867145.630 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 16.024200 seconds old.
2016-11-11T12:25:45.633Z,1478867145.633 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 16.024500 seconds old.
2016-11-11T12:25:45.635Z,1478867145.635 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.025100 seconds old.
2016-11-11T12:25:45.637Z,1478867145.637 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 16.025400 seconds old.
2016-11-11T12:25:45.951Z,1478867145.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:45.966Z,1478867145.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 16.361400 seconds old.
2016-11-11T12:25:45.967Z,1478867145.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:45.968Z,1478867145.968 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 16.362100 seconds old.
2016-11-11T12:25:45.971Z,1478867145.971 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 16.362200 seconds old.
2016-11-11T12:25:45.973Z,1478867145.973 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.362800 seconds old.
2016-11-11T12:25:45.975Z,1478867145.975 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 16.363200 seconds old.
2016-11-11T12:25:46.352Z,1478867146.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:46.372Z,1478867146.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 16.767300 seconds old.
2016-11-11T12:25:46.373Z,1478867146.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:46.374Z,1478867146.374 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 16.767800 seconds old.
2016-11-11T12:25:46.377Z,1478867146.376 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 16.768000 seconds old.
2016-11-11T12:25:46.379Z,1478867146.379 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.768500 seconds old.
2016-11-11T12:25:46.380Z,1478867146.380 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 16.768900 seconds old.
2016-11-11T12:25:46.752Z,1478867146.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:46.771Z,1478867146.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 17.167200 seconds old.
2016-11-11T12:25:46.773Z,1478867146.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:46.774Z,1478867146.774 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 17.167600 seconds old.
2016-11-11T12:25:46.776Z,1478867146.776 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 17.168000 seconds old.
2016-11-11T12:25:46.779Z,1478867146.779 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 17.168600 seconds old.
2016-11-11T12:25:46.780Z,1478867146.780 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 17.169000 seconds old.
2016-11-11T12:25:47.154Z,1478867147.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:47.168Z,1478867147.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 17.564000 seconds old.
2016-11-11T12:25:47.170Z,1478867147.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:47.171Z,1478867147.171 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 17.564500 seconds old.
2016-11-11T12:25:47.173Z,1478867147.173 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 17.564800 seconds old.
2016-11-11T12:25:47.176Z,1478867147.176 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 17.565400 seconds old.
2016-11-11T12:25:47.177Z,1478867147.177 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 17.565800 seconds old.
2016-11-11T12:25:47.545Z,1478867147.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:47.622Z,1478867147.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 18.017100 seconds old.
2016-11-11T12:25:47.623Z,1478867147.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:47.640Z,1478867147.640 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 18.034000 seconds old.
2016-11-11T12:25:47.643Z,1478867147.643 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 18.034100 seconds old.
2016-11-11T12:25:47.652Z,1478867147.652 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 18.041200 seconds old.
2016-11-11T12:25:47.653Z,1478867147.653 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 18.041600 seconds old.
2016-11-11T12:25:47.950Z,1478867147.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:47.973Z,1478867147.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 18.368600 seconds old.
2016-11-11T12:25:47.974Z,1478867147.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:47.975Z,1478867147.975 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 18.369000 seconds old.
2016-11-11T12:25:47.984Z,1478867147.984 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 18.375300 seconds old.
2016-11-11T12:25:47.986Z,1478867147.986 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 18.376000 seconds old.
2016-11-11T12:25:47.988Z,1478867147.988 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 18.376400 seconds old.
2016-11-11T12:25:48.345Z,1478867148.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:48.375Z,1478867148.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 18.771200 seconds old.
2016-11-11T12:25:48.377Z,1478867148.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:48.378Z,1478867148.378 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 18.771700 seconds old.
2016-11-11T12:25:48.381Z,1478867148.381 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 18.772200 seconds old.
2016-11-11T12:25:48.383Z,1478867148.383 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 18.772700 seconds old.
2016-11-11T12:25:48.385Z,1478867148.385 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 18.773400 seconds old.
2016-11-11T12:25:48.747Z,1478867148.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:48.773Z,1478867148.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 19.168700 seconds old.
2016-11-11T12:25:48.774Z,1478867148.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:48.775Z,1478867148.775 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 19.169200 seconds old.
2016-11-11T12:25:48.778Z,1478867148.778 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 19.169300 seconds old.
2016-11-11T12:25:48.780Z,1478867148.780 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 19.169800 seconds old.
2016-11-11T12:25:48.782Z,1478867148.782 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 19.170200 seconds old.
2016-11-11T12:25:49.180Z,1478867149.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:49.215Z,1478867149.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 19.610700 seconds old.
2016-11-11T12:25:49.216Z,1478867149.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:49.226Z,1478867149.226 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 19.619500 seconds old.
2016-11-11T12:25:49.233Z,1478867149.233 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 19.624100 seconds old.
2016-11-11T12:25:49.235Z,1478867149.235 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 19.624800 seconds old.
2016-11-11T12:25:49.248Z,1478867149.248 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 19.636200 seconds old.
2016-11-11T12:25:49.546Z,1478867149.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:49.560Z,1478867149.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 19.955500 seconds old.
2016-11-11T12:25:49.561Z,1478867149.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:49.562Z,1478867149.562 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 19.955900 seconds old.
2016-11-11T12:25:49.565Z,1478867149.565 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 19.956400 seconds old.
2016-11-11T12:25:49.567Z,1478867149.567 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 19.957000 seconds old.
2016-11-11T12:25:49.569Z,1478867149.569 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 19.957400 seconds old.
2016-11-11T12:25:49.948Z,1478867149.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:49.968Z,1478867149.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 20.363300 seconds old.
2016-11-11T12:25:49.969Z,1478867149.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:49.970Z,1478867149.970 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 20.363800 seconds old.
2016-11-11T12:25:49.973Z,1478867149.973 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 20.364100 seconds old.
2016-11-11T12:25:49.975Z,1478867149.975 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 20.364600 seconds old.
2016-11-11T12:25:49.977Z,1478867149.977 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 20.365200 seconds old.
2016-11-11T12:25:50.348Z,1478867150.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:50.361Z,1478867150.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 20.757000 seconds old.
2016-11-11T12:25:50.363Z,1478867150.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:50.364Z,1478867150.364 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 20.757500 seconds old.
2016-11-11T12:25:50.366Z,1478867150.366 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 20.757600 seconds old.
2016-11-11T12:25:50.368Z,1478867150.368 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 20.758200 seconds old.
2016-11-11T12:25:50.370Z,1478867150.370 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 20.758500 seconds old.
2016-11-11T12:25:50.749Z,1478867150.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:50.763Z,1478867150.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 21.158600 seconds old.
2016-11-11T12:25:50.765Z,1478867150.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:50.766Z,1478867150.766 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 21.159300 seconds old.
2016-11-11T12:25:50.768Z,1478867150.768 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 21.159600 seconds old.
2016-11-11T12:25:50.771Z,1478867150.770 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 21.160100 seconds old.
2016-11-11T12:25:50.772Z,1478867150.772 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 21.160700 seconds old.
2016-11-11T12:25:51.166Z,1478867151.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:51.193Z,1478867151.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 21.589000 seconds old.
2016-11-11T12:25:51.195Z,1478867151.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:51.196Z,1478867151.196 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 21.590100 seconds old.
2016-11-11T12:25:51.199Z,1478867151.199 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 21.590300 seconds old.
2016-11-11T12:25:51.201Z,1478867151.201 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 21.591000 seconds old.
2016-11-11T12:25:51.203Z,1478867151.203 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 21.591400 seconds old.
2016-11-11T12:25:51.549Z,1478867151.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:51.563Z,1478867151.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 21.958800 seconds old.
2016-11-11T12:25:51.564Z,1478867151.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:51.566Z,1478867151.566 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 21.959300 seconds old.
2016-11-11T12:25:51.568Z,1478867151.568 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 21.959500 seconds old.
2016-11-11T12:25:51.570Z,1478867151.570 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 21.960000 seconds old.
2016-11-11T12:25:51.572Z,1478867151.572 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 21.960500 seconds old.
2016-11-11T12:25:51.947Z,1478867151.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:51.961Z,1478867151.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 22.356500 seconds old.
2016-11-11T12:25:51.962Z,1478867151.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:51.963Z,1478867151.963 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 22.357000 seconds old.
2016-11-11T12:25:51.966Z,1478867151.966 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 22.357300 seconds old.
2016-11-11T12:25:51.968Z,1478867151.968 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 22.358000 seconds old.
2016-11-11T12:25:51.970Z,1478867151.970 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 22.358500 seconds old.
2016-11-11T12:25:52.350Z,1478867152.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:52.364Z,1478867152.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 22.759700 seconds old.
2016-11-11T12:25:52.365Z,1478867152.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:52.366Z,1478867152.366 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 22.760200 seconds old.
2016-11-11T12:25:52.369Z,1478867152.369 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 22.760500 seconds old.
2016-11-11T12:25:52.372Z,1478867152.372 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 22.761200 seconds old.
2016-11-11T12:25:52.373Z,1478867152.373 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 22.761700 seconds old.
2016-11-11T12:25:52.746Z,1478867152.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:52.762Z,1478867152.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 23.157300 seconds old.
2016-11-11T12:25:52.763Z,1478867152.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:52.764Z,1478867152.764 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 23.157800 seconds old.
2016-11-11T12:25:52.766Z,1478867152.766 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 23.157900 seconds old.
2016-11-11T12:25:52.769Z,1478867152.769 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 23.158400 seconds old.
2016-11-11T12:25:52.770Z,1478867152.770 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 23.158800 seconds old.
2016-11-11T12:25:53.166Z,1478867153.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:53.191Z,1478867153.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 23.586600 seconds old.
2016-11-11T12:25:53.192Z,1478867153.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:53.193Z,1478867153.194 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 23.587300 seconds old.
2016-11-11T12:25:53.196Z,1478867153.196 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 23.587700 seconds old.
2016-11-11T12:25:53.199Z,1478867153.199 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 23.588200 seconds old.
2016-11-11T12:25:53.200Z,1478867153.200 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 23.588800 seconds old.
2016-11-11T12:25:53.550Z,1478867153.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:53.564Z,1478867153.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 23.959800 seconds old.
2016-11-11T12:25:53.565Z,1478867153.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:53.566Z,1478867153.566 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 23.960200 seconds old.
2016-11-11T12:25:53.569Z,1478867153.569 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 23.960600 seconds old.
2016-11-11T12:25:53.572Z,1478867153.572 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 23.961200 seconds old.
2016-11-11T12:25:53.573Z,1478867153.573 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 23.961600 seconds old.
2016-11-11T12:25:53.945Z,1478867153.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:53.963Z,1478867153.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 24.359000 seconds old.
2016-11-11T12:25:53.965Z,1478867153.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:53.966Z,1478867153.966 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 24.359500 seconds old.
2016-11-11T12:25:53.968Z,1478867153.968 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 24.359700 seconds old.
2016-11-11T12:25:53.970Z,1478867153.970 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 24.360100 seconds old.
2016-11-11T12:25:53.972Z,1478867153.972 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 24.360600 seconds old.
2016-11-11T12:25:54.350Z,1478867154.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:54.364Z,1478867154.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 24.759700 seconds old.
2016-11-11T12:25:54.365Z,1478867154.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:54.366Z,1478867154.366 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 24.760200 seconds old.
2016-11-11T12:25:54.369Z,1478867154.369 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 24.760500 seconds old.
2016-11-11T12:25:54.372Z,1478867154.372 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 24.761200 seconds old.
2016-11-11T12:25:54.373Z,1478867154.373 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 24.761600 seconds old.
2016-11-11T12:25:54.745Z,1478867154.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:54.760Z,1478867154.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 25.155300 seconds old.
2016-11-11T12:25:54.761Z,1478867154.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:54.762Z,1478867154.762 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 25.155800 seconds old.
2016-11-11T12:25:54.765Z,1478867154.765 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 25.156100 seconds old.
2016-11-11T12:25:54.767Z,1478867154.767 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 25.156600 seconds old.
2016-11-11T12:25:54.769Z,1478867154.769 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 25.157300 seconds old.
2016-11-11T12:25:55.153Z,1478867155.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:55.167Z,1478867155.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 25.562400 seconds old.
2016-11-11T12:25:55.168Z,1478867155.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:55.169Z,1478867155.169 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 25.563100 seconds old.
2016-11-11T12:25:55.172Z,1478867155.172 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 25.563400 seconds old.
2016-11-11T12:25:55.174Z,1478867155.174 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 25.563900 seconds old.
2016-11-11T12:25:55.176Z,1478867155.176 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 25.564400 seconds old.
2016-11-11T12:25:55.545Z,1478867155.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:55.564Z,1478867155.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 25.959400 seconds old.
2016-11-11T12:25:55.565Z,1478867155.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:55.566Z,1478867155.566 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 25.959900 seconds old.
2016-11-11T12:25:55.569Z,1478867155.569 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 25.960200 seconds old.
2016-11-11T12:25:55.571Z,1478867155.571 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 25.960700 seconds old.
2016-11-11T12:25:55.573Z,1478867155.573 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 25.961300 seconds old.
2016-11-11T12:25:55.946Z,1478867155.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:55.960Z,1478867155.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 26.356000 seconds old.
2016-11-11T12:25:55.962Z,1478867155.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:55.963Z,1478867155.963 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 26.356500 seconds old.
2016-11-11T12:25:55.965Z,1478867155.965 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 26.356900 seconds old.
2016-11-11T12:25:55.968Z,1478867155.968 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 26.357800 seconds old.
2016-11-11T12:25:55.970Z,1478867155.970 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 26.358200 seconds old.
2016-11-11T12:25:56.346Z,1478867156.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:56.397Z,1478867156.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 26.792400 seconds old.
2016-11-11T12:25:56.398Z,1478867156.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:56.399Z,1478867156.399 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 26.793000 seconds old.
2016-11-11T12:25:56.408Z,1478867156.408 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 26.799100 seconds old.
2016-11-11T12:25:56.410Z,1478867156.410 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 26.799900 seconds old.
2016-11-11T12:25:56.420Z,1478867156.420 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 26.808500 seconds old.
2016-11-11T12:25:56.748Z,1478867156.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:56.768Z,1478867156.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 27.163400 seconds old.
2016-11-11T12:25:56.769Z,1478867156.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:56.770Z,1478867156.770 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 27.163800 seconds old.
2016-11-11T12:25:56.773Z,1478867156.773 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 27.164500 seconds old.
2016-11-11T12:25:56.775Z,1478867156.776 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 27.165100 seconds old.
2016-11-11T12:25:56.777Z,1478867156.777 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 27.165600 seconds old.
2016-11-11T12:25:57.149Z,1478867157.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:57.168Z,1478867157.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 27.563300 seconds old.
2016-11-11T12:25:57.169Z,1478867157.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:57.170Z,1478867157.170 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 27.563800 seconds old.
2016-11-11T12:25:57.173Z,1478867157.173 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 27.564200 seconds old.
2016-11-11T12:25:57.175Z,1478867157.175 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 27.564700 seconds old.
2016-11-11T12:25:57.177Z,1478867157.177 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 27.565400 seconds old.
2016-11-11T12:25:57.545Z,1478867157.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:57.584Z,1478867157.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 27.979300 seconds old.
2016-11-11T12:25:57.585Z,1478867157.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:57.586Z,1478867157.586 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 27.979800 seconds old.
2016-11-11T12:25:57.589Z,1478867157.589 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 27.980200 seconds old.
2016-11-11T12:25:57.591Z,1478867157.591 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 27.980700 seconds old.
2016-11-11T12:25:57.593Z,1478867157.593 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 27.981200 seconds old.
2016-11-11T12:25:57.607Z,1478867157.607 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T12:25:57.942Z,1478867157.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:57.984Z,1478867157.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 28.379400 seconds old.
2016-11-11T12:25:57.985Z,1478867157.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:57.986Z,1478867157.986 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 28.379900 seconds old.
2016-11-11T12:25:57.989Z,1478867157.989 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 28.380300 seconds old.
2016-11-11T12:25:57.991Z,1478867157.991 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 28.380700 seconds old.
2016-11-11T12:25:57.993Z,1478867157.993 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 28.381300 seconds old.
2016-11-11T12:25:58.345Z,1478867158.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:58.364Z,1478867158.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 28.759200 seconds old.
2016-11-11T12:25:58.365Z,1478867158.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:58.366Z,1478867158.366 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 28.759700 seconds old.
2016-11-11T12:25:58.368Z,1478867158.368 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 28.760000 seconds old.
2016-11-11T12:25:58.371Z,1478867158.371 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 28.760500 seconds old.
2016-11-11T12:25:58.373Z,1478867158.373 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 28.761100 seconds old.
2016-11-11T12:25:58.749Z,1478867158.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:58.788Z,1478867158.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 29.183900 seconds old.
2016-11-11T12:25:58.790Z,1478867158.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:58.791Z,1478867158.791 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 29.184400 seconds old.
2016-11-11T12:25:58.793Z,1478867158.793 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 29.184600 seconds old.
2016-11-11T12:25:58.795Z,1478867158.796 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 29.185100 seconds old.
2016-11-11T12:25:58.797Z,1478867158.797 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 29.185600 seconds old.
2016-11-11T12:25:59.145Z,1478867159.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:59.159Z,1478867159.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 29.554700 seconds old.
2016-11-11T12:25:59.161Z,1478867159.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:59.162Z,1478867159.161 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 29.555400 seconds old.
2016-11-11T12:25:59.164Z,1478867159.164 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 29.555700 seconds old.
2016-11-11T12:25:59.167Z,1478867159.167 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 29.556200 seconds old.
2016-11-11T12:25:59.168Z,1478867159.168 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 29.556700 seconds old.
2016-11-11T12:25:59.552Z,1478867159.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:59.605Z,1478867159.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 30.000700 seconds old.
2016-11-11T12:25:59.606Z,1478867159.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:59.608Z,1478867159.608 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 30.001300 seconds old.
2016-11-11T12:25:59.610Z,1478867159.610 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 30.001500 seconds old.
2016-11-11T12:25:59.613Z,1478867159.612 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 30.002200 seconds old.
2016-11-11T12:25:59.614Z,1478867159.614 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 30.002500 seconds old.
2016-11-11T12:25:59.945Z,1478867159.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:25:59.988Z,1478867159.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 30.383500 seconds old.
2016-11-11T12:25:59.989Z,1478867159.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:25:59.990Z,1478867159.990 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 30.384100 seconds old.
2016-11-11T12:25:59.993Z,1478867159.993 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 30.384400 seconds old.
2016-11-11T12:25:59.995Z,1478867159.995 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 30.385100 seconds old.
2016-11-11T12:25:59.997Z,1478867159.997 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 30.385400 seconds old.
2016-11-11T12:26:00.349Z,1478867160.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:00.363Z,1478867160.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 30.758600 seconds old.
2016-11-11T12:26:00.364Z,1478867160.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:00.366Z,1478867160.365 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 30.759300 seconds old.
2016-11-11T12:26:00.368Z,1478867160.368 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 30.759600 seconds old.
2016-11-11T12:26:00.370Z,1478867160.371 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 30.760100 seconds old.
2016-11-11T12:26:00.372Z,1478867160.372 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 30.760700 seconds old.
2016-11-11T12:26:00.762Z,1478867160.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:00.777Z,1478867160.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 31.172300 seconds old.
2016-11-11T12:26:00.778Z,1478867160.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:00.779Z,1478867160.779 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 31.172800 seconds old.
2016-11-11T12:26:00.782Z,1478867160.782 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 31.173100 seconds old.
2016-11-11T12:26:00.784Z,1478867160.784 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 31.174000 seconds old.
2016-11-11T12:26:00.786Z,1478867160.786 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 31.174400 seconds old.
2016-11-11T12:26:01.149Z,1478867161.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:01.162Z,1478867161.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 31.558100 seconds old.
2016-11-11T12:26:01.164Z,1478867161.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:01.165Z,1478867161.165 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 31.558600 seconds old.
2016-11-11T12:26:01.167Z,1478867161.167 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 31.558800 seconds old.
2016-11-11T12:26:01.170Z,1478867161.170 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 31.559300 seconds old.
2016-11-11T12:26:01.171Z,1478867161.171 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 31.559600 seconds old.
2016-11-11T12:26:01.554Z,1478867161.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:01.608Z,1478867161.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 32.003200 seconds old.
2016-11-11T12:26:01.609Z,1478867161.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:01.610Z,1478867161.610 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 32.003800 seconds old.
2016-11-11T12:26:01.627Z,1478867161.627 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 32.018500 seconds old.
2016-11-11T12:26:01.630Z,1478867161.630 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 32.019400 seconds old.
2016-11-11T12:26:01.631Z,1478867161.631 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 32.019900 seconds old.
2016-11-11T12:26:01.949Z,1478867161.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:01.968Z,1478867161.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 32.363300 seconds old.
2016-11-11T12:26:01.969Z,1478867161.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:01.970Z,1478867161.970 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 32.363900 seconds old.
2016-11-11T12:26:01.973Z,1478867161.973 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 32.364400 seconds old.
2016-11-11T12:26:01.975Z,1478867161.976 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 32.365100 seconds old.
2016-11-11T12:26:01.977Z,1478867161.977 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 32.365500 seconds old.
2016-11-11T12:26:02.349Z,1478867162.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:02.362Z,1478867162.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 32.758100 seconds old.
2016-11-11T12:26:02.364Z,1478867162.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:02.365Z,1478867162.365 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 32.758600 seconds old.
2016-11-11T12:26:02.367Z,1478867162.367 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 32.758700 seconds old.
2016-11-11T12:26:02.370Z,1478867162.370 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 32.759200 seconds old.
2016-11-11T12:26:02.371Z,1478867162.371 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 32.759600 seconds old.
2016-11-11T12:26:02.745Z,1478867162.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:02.759Z,1478867162.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 33.154600 seconds old.
2016-11-11T12:26:02.761Z,1478867162.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:02.762Z,1478867162.761 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 33.155300 seconds old.
2016-11-11T12:26:02.764Z,1478867162.764 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 33.155600 seconds old.
2016-11-11T12:26:02.766Z,1478867162.766 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 33.156100 seconds old.
2016-11-11T12:26:02.768Z,1478867162.768 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 33.156700 seconds old.
2016-11-11T12:26:03.149Z,1478867163.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:03.168Z,1478867163.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 33.563300 seconds old.
2016-11-11T12:26:03.169Z,1478867163.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:03.170Z,1478867163.170 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 33.563800 seconds old.
2016-11-11T12:26:03.172Z,1478867163.172 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 33.564100 seconds old.
2016-11-11T12:26:03.175Z,1478867163.175 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 33.564500 seconds old.
2016-11-11T12:26:03.177Z,1478867163.177 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 33.565100 seconds old.
2016-11-11T12:26:03.545Z,1478867163.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:03.563Z,1478867163.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 33.959100 seconds old.
2016-11-11T12:26:03.565Z,1478867163.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:03.566Z,1478867163.566 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 33.959600 seconds old.
2016-11-11T12:26:03.568Z,1478867163.568 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 33.959800 seconds old.
2016-11-11T12:26:03.571Z,1478867163.571 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 33.960200 seconds old.
2016-11-11T12:26:03.572Z,1478867163.572 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 33.960700 seconds old.
2016-11-11T12:26:03.942Z,1478867163.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:03.956Z,1478867163.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 34.351700 seconds old.
2016-11-11T12:26:03.957Z,1478867163.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:03.958Z,1478867163.958 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 34.352200 seconds old.
2016-11-11T12:26:03.961Z,1478867163.961 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 34.352500 seconds old.
2016-11-11T12:26:03.964Z,1478867163.964 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 34.353200 seconds old.
2016-11-11T12:26:03.965Z,1478867163.965 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 34.353500 seconds old.
2016-11-11T12:26:04.345Z,1478867164.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:04.364Z,1478867164.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 34.759300 seconds old.
2016-11-11T12:26:04.365Z,1478867164.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:04.366Z,1478867164.366 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 34.759800 seconds old.
2016-11-11T12:26:04.369Z,1478867164.369 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 34.760100 seconds old.
2016-11-11T12:26:04.371Z,1478867164.371 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 34.760600 seconds old.
2016-11-11T12:26:04.373Z,1478867164.373 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 34.761200 seconds old.
2016-11-11T12:26:04.749Z,1478867164.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:04.768Z,1478867164.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 35.163300 seconds old.
2016-11-11T12:26:04.769Z,1478867164.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:04.770Z,1478867164.770 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 35.163800 seconds old.
2016-11-11T12:26:04.773Z,1478867164.773 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 35.164100 seconds old.
2016-11-11T12:26:04.775Z,1478867164.775 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 35.164600 seconds old.
2016-11-11T12:26:04.777Z,1478867164.777 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 35.165100 seconds old.
2016-11-11T12:26:05.162Z,1478867165.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:05.230Z,1478867165.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 35.625300 seconds old.
2016-11-11T12:26:05.231Z,1478867165.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:05.232Z,1478867165.232 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 35.626000 seconds old.
2016-11-11T12:26:05.235Z,1478867165.235 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 35.626100 seconds old.
2016-11-11T12:26:05.237Z,1478867165.237 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 35.626800 seconds old.
2016-11-11T12:26:05.239Z,1478867165.239 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 35.627200 seconds old.
2016-11-11T12:26:05.549Z,1478867165.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:05.568Z,1478867165.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 35.963300 seconds old.
2016-11-11T12:26:05.569Z,1478867165.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:05.570Z,1478867165.570 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 35.963800 seconds old.
2016-11-11T12:26:05.573Z,1478867165.573 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 35.964100 seconds old.
2016-11-11T12:26:05.575Z,1478867165.575 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 35.964600 seconds old.
2016-11-11T12:26:05.577Z,1478867165.577 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 35.965200 seconds old.
2016-11-11T12:26:05.949Z,1478867165.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:05.963Z,1478867165.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 36.358300 seconds old.
2016-11-11T12:26:05.964Z,1478867165.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:05.965Z,1478867165.965 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 36.358800 seconds old.
2016-11-11T12:26:05.967Z,1478867165.967 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 36.358900 seconds old.
2016-11-11T12:26:05.970Z,1478867165.970 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 36.359400 seconds old.
2016-11-11T12:26:05.971Z,1478867165.971 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 36.359700 seconds old.
2016-11-11T12:26:06.345Z,1478867166.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:06.364Z,1478867166.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 36.759300 seconds old.
2016-11-11T12:26:06.365Z,1478867166.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:06.366Z,1478867166.366 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 36.759800 seconds old.
2016-11-11T12:26:06.369Z,1478867166.369 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 36.760200 seconds old.
2016-11-11T12:26:06.371Z,1478867166.371 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 36.760700 seconds old.
2016-11-11T12:26:06.373Z,1478867166.373 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 36.761300 seconds old.
2016-11-11T12:26:06.749Z,1478867166.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:06.768Z,1478867166.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 37.163300 seconds old.
2016-11-11T12:26:06.769Z,1478867166.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:06.770Z,1478867166.770 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 37.163800 seconds old.
2016-11-11T12:26:06.773Z,1478867166.773 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 37.164100 seconds old.
2016-11-11T12:26:06.775Z,1478867166.775 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 37.164600 seconds old.
2016-11-11T12:26:06.777Z,1478867166.777 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 37.165300 seconds old.
2016-11-11T12:26:07.145Z,1478867167.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:07.163Z,1478867167.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 37.559200 seconds old.
2016-11-11T12:26:07.165Z,1478867167.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:07.166Z,1478867167.166 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 37.559700 seconds old.
2016-11-11T12:26:07.168Z,1478867167.168 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 37.559800 seconds old.
2016-11-11T12:26:07.171Z,1478867167.171 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 37.560400 seconds old.
2016-11-11T12:26:07.172Z,1478867167.172 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 37.561000 seconds old.
2016-11-11T12:26:07.546Z,1478867167.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:07.560Z,1478867167.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 37.955800 seconds old.
2016-11-11T12:26:07.562Z,1478867167.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:07.562Z,1478867167.562 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 37.956300 seconds old.
2016-11-11T12:26:07.565Z,1478867167.565 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 37.956600 seconds old.
2016-11-11T12:26:07.568Z,1478867167.568 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 37.957200 seconds old.
2016-11-11T12:26:07.569Z,1478867167.569 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 37.957600 seconds old.
2016-11-11T12:26:07.950Z,1478867167.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:07.964Z,1478867167.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 38.359800 seconds old.
2016-11-11T12:26:07.965Z,1478867167.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:07.966Z,1478867167.967 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 38.360300 seconds old.
2016-11-11T12:26:07.969Z,1478867167.969 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 38.360600 seconds old.
2016-11-11T12:26:07.972Z,1478867167.972 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 38.361300 seconds old.
2016-11-11T12:26:07.973Z,1478867167.973 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 38.361700 seconds old.
2016-11-11T12:26:08.350Z,1478867168.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:08.364Z,1478867168.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 38.759300 seconds old.
2016-11-11T12:26:08.365Z,1478867168.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:08.366Z,1478867168.366 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 38.759700 seconds old.
2016-11-11T12:26:08.368Z,1478867168.368 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 38.760000 seconds old.
2016-11-11T12:26:08.371Z,1478867168.371 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 38.760500 seconds old.
2016-11-11T12:26:08.372Z,1478867168.372 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 38.760900 seconds old.
2016-11-11T12:26:08.754Z,1478867168.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:08.769Z,1478867168.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 39.164400 seconds old.
2016-11-11T12:26:08.770Z,1478867168.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:08.771Z,1478867168.771 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 39.164900 seconds old.
2016-11-11T12:26:08.774Z,1478867168.774 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 39.165200 seconds old.
2016-11-11T12:26:08.776Z,1478867168.776 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 39.165900 seconds old.
2016-11-11T12:26:08.778Z,1478867168.778 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 39.166300 seconds old.
2016-11-11T12:26:09.150Z,1478867169.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:09.164Z,1478867169.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 39.559700 seconds old.
2016-11-11T12:26:09.165Z,1478867169.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:09.166Z,1478867169.166 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 39.560200 seconds old.
2016-11-11T12:26:09.169Z,1478867169.169 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 39.560500 seconds old.
2016-11-11T12:26:09.172Z,1478867169.172 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 39.561200 seconds old.
2016-11-11T12:26:09.173Z,1478867169.173 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 39.561600 seconds old.
2016-11-11T12:26:09.550Z,1478867169.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:09.613Z,1478867169.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 40.009100 seconds old.
2016-11-11T12:26:09.615Z,1478867169.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:09.616Z,1478867169.616 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 40.009800 seconds old.
2016-11-11T12:26:09.618Z,1478867169.618 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 40.009900 seconds old.
2016-11-11T12:26:09.621Z,1478867169.621 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 40.010600 seconds old.
2016-11-11T12:26:09.623Z,1478867169.622 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 40.011000 seconds old.
2016-11-11T12:26:09.949Z,1478867169.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:09.964Z,1478867169.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 40.359700 seconds old.
2016-11-11T12:26:09.965Z,1478867169.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:09.966Z,1478867169.966 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 40.360200 seconds old.
2016-11-11T12:26:09.969Z,1478867169.969 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 40.360500 seconds old.
2016-11-11T12:26:09.971Z,1478867169.971 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 40.361100 seconds old.
2016-11-11T12:26:09.973Z,1478867169.973 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 40.361500 seconds old.
2016-11-11T12:26:10.345Z,1478867170.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:10.360Z,1478867170.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 40.756100 seconds old.
2016-11-11T12:26:10.362Z,1478867170.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:10.363Z,1478867170.363 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 40.756500 seconds old.
2016-11-11T12:26:10.365Z,1478867170.365 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 40.756900 seconds old.
2016-11-11T12:26:10.368Z,1478867170.368 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 40.757600 seconds old.
2016-11-11T12:26:10.370Z,1478867170.369 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 40.758000 seconds old.
2016-11-11T12:26:10.746Z,1478867170.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:10.772Z,1478867170.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 41.168100 seconds old.
2016-11-11T12:26:10.774Z,1478867170.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:10.775Z,1478867170.775 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 41.168500 seconds old.
2016-11-11T12:26:10.784Z,1478867170.784 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 41.175300 seconds old.
2016-11-11T12:26:10.786Z,1478867170.786 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 41.176100 seconds old.
2016-11-11T12:26:10.792Z,1478867170.792 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 41.180300 seconds old.
2016-11-11T12:26:11.146Z,1478867171.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:11.219Z,1478867171.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 41.614100 seconds old.
2016-11-11T12:26:11.232Z,1478867171.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:11.233Z,1478867171.233 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 41.627100 seconds old.
2016-11-11T12:26:11.244Z,1478867171.244 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 41.635700 seconds old.
2016-11-11T12:26:11.247Z,1478867171.247 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 41.636400 seconds old.
2016-11-11T12:26:11.257Z,1478867171.257 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 41.645100 seconds old.
2016-11-11T12:26:11.545Z,1478867171.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:11.572Z,1478867171.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 41.968200 seconds old.
2016-11-11T12:26:11.574Z,1478867171.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:11.575Z,1478867171.575 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 41.968600 seconds old.
2016-11-11T12:26:11.578Z,1478867171.578 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 41.969100 seconds old.
2016-11-11T12:26:11.584Z,1478867171.584 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 41.973800 seconds old.
2016-11-11T12:26:11.586Z,1478867171.586 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 41.974200 seconds old.
2016-11-11T12:26:11.945Z,1478867171.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:12.004Z,1478867172.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 42.399600 seconds old.
2016-11-11T12:26:12.005Z,1478867172.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:12.006Z,1478867172.006 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 42.400100 seconds old.
2016-11-11T12:26:12.009Z,1478867172.009 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 42.400200 seconds old.
2016-11-11T12:26:12.011Z,1478867172.011 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 42.400700 seconds old.
2016-11-11T12:26:12.026Z,1478867172.026 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 42.414200 seconds old.
2016-11-11T12:26:12.345Z,1478867172.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:12.396Z,1478867172.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 42.791300 seconds old.
2016-11-11T12:26:12.397Z,1478867172.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:12.398Z,1478867172.398 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 42.791800 seconds old.
2016-11-11T12:26:12.405Z,1478867172.405 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 42.796200 seconds old.
2016-11-11T12:26:12.412Z,1478867172.411 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 42.796800 seconds old.
2016-11-11T12:26:12.413Z,1478867172.413 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 42.801500 seconds old.
2016-11-11T12:26:12.746Z,1478867172.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:12.772Z,1478867172.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 43.167400 seconds old.
2016-11-11T12:26:12.773Z,1478867172.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:12.774Z,1478867172.774 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 43.167800 seconds old.
2016-11-11T12:26:12.776Z,1478867172.776 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 43.168100 seconds old.
2016-11-11T12:26:12.780Z,1478867172.780 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 43.168500 seconds old.
2016-11-11T12:26:12.781Z,1478867172.781 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 43.169900 seconds old.
2016-11-11T12:26:18.548Z,1478867178.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:18.604Z,1478867178.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 48.999300 seconds old.
2016-11-11T12:26:18.605Z,1478867178.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:18.606Z,1478867178.606 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 48.999700 seconds old.
2016-11-11T12:26:18.609Z,1478867178.609 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 49.000000 seconds old.
2016-11-11T12:26:18.611Z,1478867178.611 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 49.000500 seconds old.
2016-11-11T12:26:18.612Z,1478867178.612 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 49.000900 seconds old.
2016-11-11T12:26:18.702Z,1478867178.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:18.724Z,1478867178.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 49.119500 seconds old.
2016-11-11T12:26:18.725Z,1478867178.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:18.726Z,1478867178.726 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 49.120100 seconds old.
2016-11-11T12:26:18.732Z,1478867178.732 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 49.123300 seconds old.
2016-11-11T12:26:18.734Z,1478867178.734 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 49.123800 seconds old.
2016-11-11T12:26:18.740Z,1478867178.740 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 49.128300 seconds old.
2016-11-11T12:26:19.119Z,1478867179.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:19.184Z,1478867179.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 49.579300 seconds old.
2016-11-11T12:26:19.185Z,1478867179.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:19.186Z,1478867179.186 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 49.579700 seconds old.
2016-11-11T12:26:19.189Z,1478867179.188 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 49.580000 seconds old.
2016-11-11T12:26:19.191Z,1478867179.191 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 49.580500 seconds old.
2016-11-11T12:26:19.193Z,1478867179.193 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 49.581200 seconds old.
2016-11-11T12:26:19.464Z,1478867179.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:19.520Z,1478867179.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 49.915700 seconds old.
2016-11-11T12:26:19.521Z,1478867179.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:19.522Z,1478867179.522 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 49.916200 seconds old.
2016-11-11T12:26:19.525Z,1478867179.525 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 49.916300 seconds old.
2016-11-11T12:26:19.527Z,1478867179.527 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 49.916800 seconds old.
2016-11-11T12:26:19.529Z,1478867179.529 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 49.917200 seconds old.
2016-11-11T12:26:19.867Z,1478867179.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:19.881Z,1478867179.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 50.277000 seconds old.
2016-11-11T12:26:19.883Z,1478867179.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:19.884Z,1478867179.884 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 50.277500 seconds old.
2016-11-11T12:26:19.886Z,1478867179.886 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 50.277600 seconds old.
2016-11-11T12:26:19.889Z,1478867179.889 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 50.278300 seconds old.
2016-11-11T12:26:19.890Z,1478867179.890 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 50.278700 seconds old.
2016-11-11T12:26:20.275Z,1478867180.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:20.288Z,1478867180.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 50.683900 seconds old.
2016-11-11T12:26:20.289Z,1478867180.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:20.290Z,1478867180.290 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 50.684300 seconds old.
2016-11-11T12:26:20.293Z,1478867180.293 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 50.684400 seconds old.
2016-11-11T12:26:20.296Z,1478867180.296 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 50.685800 seconds old.
2016-11-11T12:26:20.298Z,1478867180.298 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 50.686200 seconds old.
2016-11-11T12:26:20.657Z,1478867180.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:20.689Z,1478867180.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 51.084300 seconds old.
2016-11-11T12:26:20.690Z,1478867180.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:20.691Z,1478867180.691 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 51.084700 seconds old.
2016-11-11T12:26:20.693Z,1478867180.693 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 51.084900 seconds old.
2016-11-11T12:26:20.696Z,1478867180.696 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 51.085600 seconds old.
2016-11-11T12:26:20.697Z,1478867180.697 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 51.086000 seconds old.
2016-11-11T12:26:21.075Z,1478867181.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:21.106Z,1478867181.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:21.467Z,1478867181.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:21.497Z,1478867181.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:21.859Z,1478867181.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:21.897Z,1478867181.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:22.257Z,1478867182.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:22.298Z,1478867182.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:22.657Z,1478867182.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:22.676Z,1478867182.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:23.085Z,1478867183.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:23.122Z,1478867183.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:23.466Z,1478867183.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:23.481Z,1478867183.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:23.863Z,1478867183.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:23.890Z,1478867183.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:24.265Z,1478867184.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:24.282Z,1478867184.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:24.667Z,1478867184.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:24.683Z,1478867184.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:25.069Z,1478867185.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:25.085Z,1478867185.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:25.457Z,1478867185.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:25.490Z,1478867185.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:25.861Z,1478867185.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:25.887Z,1478867185.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:26.263Z,1478867186.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:26.279Z,1478867186.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:26.668Z,1478867186.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:26.683Z,1478867186.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:27.064Z,1478867187.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:27.109Z,1478867187.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:27.467Z,1478867187.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:27.474Z,1478867187.474 [PNI_TCM](ERROR): CRC does not match. Expected:0x5672 got:0x4400
2016-11-11T12:26:27.542Z,1478867187.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:27.861Z,1478867187.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:27.893Z,1478867187.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:28.259Z,1478867188.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:28.274Z,1478867188.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:28.657Z,1478867188.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:28.697Z,1478867188.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:29.063Z,1478867189.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:29.070Z,1478867189.070 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T12:26:29.105Z,1478867189.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:29.459Z,1478867189.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:29.475Z,1478867189.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:29.865Z,1478867189.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:29.885Z,1478867189.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:30.265Z,1478867190.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:30.282Z,1478867190.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:30.677Z,1478867190.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:30.715Z,1478867190.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:31.072Z,1478867191.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:31.129Z,1478867191.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:31.457Z,1478867191.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:31.533Z,1478867191.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:31.857Z,1478867191.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:31.892Z,1478867191.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:32.263Z,1478867192.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:32.270Z,1478867192.270 [PNI_TCM](ERROR): CRC does not match. Expected:0x13066 got:0x4446
2016-11-11T12:26:32.327Z,1478867192.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:32.662Z,1478867192.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:32.693Z,1478867192.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:33.095Z,1478867193.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:33.146Z,1478867193.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:33.463Z,1478867193.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:33.517Z,1478867193.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:33.858Z,1478867193.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:33.892Z,1478867193.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:34.259Z,1478867194.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:34.286Z,1478867194.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:34.657Z,1478867194.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:34.697Z,1478867194.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:35.104Z,1478867195.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:35.125Z,1478867195.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:35.460Z,1478867195.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:35.501Z,1478867195.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:35.865Z,1478867195.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:35.881Z,1478867195.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:36.265Z,1478867196.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:36.280Z,1478867196.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:36.666Z,1478867196.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:36.689Z,1478867196.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:37.072Z,1478867197.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:37.108Z,1478867197.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:37.457Z,1478867197.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:37.483Z,1478867197.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:37.857Z,1478867197.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:37.889Z,1478867197.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:38.259Z,1478867198.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:38.296Z,1478867198.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:38.659Z,1478867198.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:38.721Z,1478867198.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:39.060Z,1478867199.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:39.076Z,1478867199.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:39.464Z,1478867199.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:39.485Z,1478867199.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:39.866Z,1478867199.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:39.881Z,1478867199.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:40.266Z,1478867200.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:40.281Z,1478867200.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:40.664Z,1478867200.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:40.679Z,1478867200.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:41.057Z,1478867201.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:41.090Z,1478867201.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:41.458Z,1478867201.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:41.539Z,1478867201.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:41.865Z,1478867201.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:41.885Z,1478867201.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:42.264Z,1478867202.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:42.279Z,1478867202.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:42.665Z,1478867202.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:42.685Z,1478867202.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:43.074Z,1478867203.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:43.089Z,1478867203.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:43.457Z,1478867203.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:43.548Z,1478867203.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:43.864Z,1478867203.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:43.880Z,1478867203.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:44.264Z,1478867204.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:44.285Z,1478867204.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:44.666Z,1478867204.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:44.681Z,1478867204.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:45.075Z,1478867205.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:45.128Z,1478867205.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:45.457Z,1478867205.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:45.517Z,1478867205.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:45.857Z,1478867205.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:45.892Z,1478867205.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:46.259Z,1478867206.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:46.305Z,1478867206.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:46.657Z,1478867206.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:46.704Z,1478867206.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:47.062Z,1478867207.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:47.129Z,1478867207.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:47.462Z,1478867207.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:47.508Z,1478867207.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:47.864Z,1478867207.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:47.885Z,1478867207.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:48.260Z,1478867208.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:48.276Z,1478867208.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:48.664Z,1478867208.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:48.680Z,1478867208.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:49.066Z,1478867209.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:49.113Z,1478867209.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:49.458Z,1478867209.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:49.484Z,1478867209.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:49.857Z,1478867209.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:49.889Z,1478867209.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:50.257Z,1478867210.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:50.291Z,1478867210.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:50.657Z,1478867210.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:50.689Z,1478867210.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:51.080Z,1478867211.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:51.118Z,1478867211.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:51.457Z,1478867211.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:51.494Z,1478867211.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:51.857Z,1478867211.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:51.889Z,1478867211.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:52.257Z,1478867212.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:52.285Z,1478867212.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:52.657Z,1478867212.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:52.692Z,1478867212.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:53.057Z,1478867213.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:53.074Z,1478867213.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:53.464Z,1478867213.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:53.479Z,1478867213.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:53.864Z,1478867213.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:53.885Z,1478867213.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:54.264Z,1478867214.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:54.291Z,1478867214.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:54.665Z,1478867214.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:54.681Z,1478867214.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:55.065Z,1478867215.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:55.085Z,1478867215.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:55.509Z,1478867215.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:55.549Z,1478867215.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:55.857Z,1478867215.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:55.872Z,1478867215.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:56.261Z,1478867216.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:56.281Z,1478867216.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:56.665Z,1478867216.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:56.680Z,1478867216.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:57.064Z,1478867217.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:57.080Z,1478867217.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:57.507Z,1478867217.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:57.539Z,1478867217.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:57.865Z,1478867217.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:57.880Z,1478867217.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:58.260Z,1478867218.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:58.317Z,1478867218.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:58.664Z,1478867218.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:58.679Z,1478867218.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:59.059Z,1478867219.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:59.075Z,1478867219.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:59.461Z,1478867219.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:59.513Z,1478867219.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:26:59.863Z,1478867219.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:26:59.881Z,1478867219.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:00.265Z,1478867220.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:00.319Z,1478867220.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:00.663Z,1478867220.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:00.678Z,1478867220.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:01.068Z,1478867221.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:01.125Z,1478867221.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:01.469Z,1478867221.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:01.524Z,1478867221.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:01.864Z,1478867221.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:01.880Z,1478867221.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:02.265Z,1478867222.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:02.285Z,1478867222.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:02.657Z,1478867222.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:02.692Z,1478867222.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:03.073Z,1478867223.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:03.094Z,1478867223.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:03.457Z,1478867223.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:03.493Z,1478867223.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:03.868Z,1478867223.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:03.889Z,1478867223.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:04.257Z,1478867224.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:04.293Z,1478867224.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:04.657Z,1478867224.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:04.692Z,1478867224.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:05.071Z,1478867225.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:05.102Z,1478867225.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:05.457Z,1478867225.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:05.494Z,1478867225.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:05.857Z,1478867225.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:05.892Z,1478867225.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:06.257Z,1478867226.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:06.293Z,1478867226.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:06.657Z,1478867226.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:06.693Z,1478867226.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:07.057Z,1478867227.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:07.140Z,1478867227.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:07.457Z,1478867227.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:07.492Z,1478867227.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:07.868Z,1478867227.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:07.884Z,1478867227.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:08.257Z,1478867228.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:08.292Z,1478867228.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:08.657Z,1478867228.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:08.683Z,1478867228.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:09.070Z,1478867229.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:09.093Z,1478867229.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:09.477Z,1478867229.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:09.535Z,1478867229.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:09.861Z,1478867229.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:09.887Z,1478867229.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:10.257Z,1478867230.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:10.290Z,1478867230.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:10.657Z,1478867230.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:10.694Z,1478867230.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:11.057Z,1478867231.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:11.094Z,1478867231.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:11.467Z,1478867231.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:11.493Z,1478867231.493 [BPC1](ERROR): Failed to parse message.
2016-11-11T12:27:11.493Z,1478867231.493 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T12:27:11.494Z,1478867231.494 [BPC1] Data Fault, FailCount= 1
2016-11-11T12:27:11.494Z,1478867231.494 [BPC1](ERROR): Data Fault
2016-11-11T12:27:11.526Z,1478867231.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:11.591Z,1478867231.591 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T12:27:11.858Z,1478867231.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:11.877Z,1478867231.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:12.257Z,1478867232.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:12.277Z,1478867232.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:12.660Z,1478867232.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:12.681Z,1478867232.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:12.727Z,1478867232.727 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:27:12.727Z,1478867232.727 [BPC1] No Fault, FailCount= 1
2016-11-11T12:27:13.061Z,1478867233.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:13.138Z,1478867233.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:16.606Z,1478867236.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:16.661Z,1478867236.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:16.761Z,1478867236.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:16.793Z,1478867236.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:17.122Z,1478867237.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:17.137Z,1478867237.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:17.515Z,1478867237.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:17.538Z,1478867237.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:17.917Z,1478867237.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:17.932Z,1478867237.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:18.317Z,1478867238.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:18.337Z,1478867238.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:18.716Z,1478867238.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:18.741Z,1478867238.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:19.125Z,1478867239.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:19.145Z,1478867239.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:19.509Z,1478867239.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:19.545Z,1478867239.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:19.909Z,1478867239.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:19.941Z,1478867239.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:20.309Z,1478867240.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:20.342Z,1478867240.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:20.709Z,1478867240.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:20.741Z,1478867240.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:21.116Z,1478867241.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:21.166Z,1478867241.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:21.509Z,1478867241.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:21.530Z,1478867241.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:21.912Z,1478867241.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:21.933Z,1478867241.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:22.313Z,1478867242.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:22.328Z,1478867242.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:22.715Z,1478867242.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:22.730Z,1478867242.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:23.117Z,1478867243.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:23.132Z,1478867243.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:23.515Z,1478867243.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:23.531Z,1478867243.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:23.912Z,1478867243.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:23.945Z,1478867243.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:24.316Z,1478867244.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:24.333Z,1478867244.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:24.715Z,1478867244.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:24.734Z,1478867244.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:25.120Z,1478867245.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:25.141Z,1478867245.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:25.516Z,1478867245.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:25.532Z,1478867245.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:25.924Z,1478867245.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:25.939Z,1478867245.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:26.309Z,1478867246.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:26.335Z,1478867246.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:26.709Z,1478867246.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:26.741Z,1478867246.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:27.109Z,1478867247.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:27.165Z,1478867247.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:27.513Z,1478867247.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:27.549Z,1478867247.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:27.913Z,1478867247.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:27.949Z,1478867247.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:28.309Z,1478867248.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:28.352Z,1478867248.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:28.709Z,1478867248.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:28.750Z,1478867248.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:29.129Z,1478867249.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:29.153Z,1478867249.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:29.515Z,1478867249.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:29.554Z,1478867249.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:29.909Z,1478867249.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:29.929Z,1478867249.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:30.310Z,1478867250.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:30.350Z,1478867250.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:30.771Z,1478867250.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:30.853Z,1478867250.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:31.122Z,1478867251.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:31.162Z,1478867251.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:31.517Z,1478867251.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:31.542Z,1478867251.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:31.918Z,1478867251.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:31.941Z,1478867251.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:32.311Z,1478867252.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:32.345Z,1478867252.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:32.711Z,1478867252.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:32.757Z,1478867252.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:33.111Z,1478867253.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:33.164Z,1478867253.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:33.514Z,1478867253.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:33.562Z,1478867253.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:33.916Z,1478867253.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:33.942Z,1478867253.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:34.315Z,1478867254.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:34.371Z,1478867254.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:34.718Z,1478867254.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:34.766Z,1478867254.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:35.124Z,1478867255.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:35.184Z,1478867255.184 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:35.184Z,1478867255.184 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 133
2016-11-11T12:27:35.184Z,1478867255.184 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:27:35.202Z,1478867255.202 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:35.203Z,1478867255.203 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 133
2016-11-11T12:27:35.203Z,1478867255.203 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:27:35.221Z,1478867255.221 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:35.221Z,1478867255.221 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 133
2016-11-11T12:27:35.221Z,1478867255.221 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:27:35.274Z,1478867255.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:27:35.275Z,1478867255.275 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:27:35.275Z,1478867255.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:27:35.511Z,1478867255.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:35.618Z,1478867255.618 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:27:35.618Z,1478867255.618 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 133
2016-11-11T12:27:35.619Z,1478867255.619 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:27:35.619Z,1478867255.619 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 133
2016-11-11T12:27:35.636Z,1478867255.635 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:27:35.636Z,1478867255.636 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 133
2016-11-11T12:27:35.914Z,1478867255.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:35.964Z,1478867255.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:27:35.965Z,1478867255.965 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:27:35.965Z,1478867255.965 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:27:35.978Z,1478867255.978 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:27:35.987Z,1478867255.987 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:27:35.988Z,1478867255.988 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:27:35.988Z,1478867255.988 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:27:35.989Z,1478867255.989 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:27:35.989Z,1478867255.989 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:27:36.311Z,1478867256.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:36.380Z,1478867256.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:36.711Z,1478867256.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:36.765Z,1478867256.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:37.119Z,1478867257.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:37.168Z,1478867257.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:37.518Z,1478867257.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:37.547Z,1478867257.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:37.911Z,1478867257.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:37.949Z,1478867257.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:38.311Z,1478867258.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:38.351Z,1478867258.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:38.725Z,1478867258.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:38.756Z,1478867258.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:39.121Z,1478867259.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:39.167Z,1478867259.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:39.516Z,1478867259.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:39.549Z,1478867259.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:39.917Z,1478867259.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:39.953Z,1478867259.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:40.317Z,1478867260.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:40.361Z,1478867260.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:40.717Z,1478867260.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:40.749Z,1478867260.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:41.114Z,1478867261.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:41.133Z,1478867261.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:41.521Z,1478867261.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:41.593Z,1478867261.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:41.916Z,1478867261.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:41.932Z,1478867261.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:42.316Z,1478867262.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:42.331Z,1478867262.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:42.733Z,1478867262.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:42.753Z,1478867262.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:43.124Z,1478867263.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:43.161Z,1478867263.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:43.509Z,1478867263.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:43.561Z,1478867263.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:43.915Z,1478867263.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:43.989Z,1478867263.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:44.311Z,1478867264.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:44.351Z,1478867264.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:44.711Z,1478867264.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:44.765Z,1478867264.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:45.110Z,1478867265.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:45.153Z,1478867265.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:45.515Z,1478867265.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:45.582Z,1478867265.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:45.911Z,1478867265.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:45.958Z,1478867265.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:46.333Z,1478867266.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:46.380Z,1478867266.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:46.718Z,1478867266.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:46.742Z,1478867266.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:47.111Z,1478867267.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:47.151Z,1478867267.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:47.524Z,1478867267.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:47.584Z,1478867267.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:47.917Z,1478867267.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:47.942Z,1478867267.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:48.311Z,1478867268.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:48.349Z,1478867268.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:48.711Z,1478867268.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:48.745Z,1478867268.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:49.112Z,1478867269.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:49.161Z,1478867269.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:49.514Z,1478867269.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:49.545Z,1478867269.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:49.916Z,1478867269.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:49.980Z,1478867269.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:50.311Z,1478867270.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:50.358Z,1478867270.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:50.714Z,1478867270.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:50.741Z,1478867270.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:51.119Z,1478867271.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:51.138Z,1478867271.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:51.528Z,1478867271.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:51.561Z,1478867271.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:51.911Z,1478867271.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:51.941Z,1478867271.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:52.311Z,1478867272.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:52.340Z,1478867272.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:52.711Z,1478867272.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:52.735Z,1478867272.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:53.111Z,1478867273.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:53.131Z,1478867273.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:53.511Z,1478867273.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:53.535Z,1478867273.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:53.911Z,1478867273.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:53.927Z,1478867273.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:54.310Z,1478867274.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:54.342Z,1478867274.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:54.712Z,1478867274.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:54.740Z,1478867274.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:55.112Z,1478867275.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:55.146Z,1478867275.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:55.510Z,1478867275.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:55.529Z,1478867275.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:55.914Z,1478867275.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:55.953Z,1478867275.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:56.309Z,1478867276.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:56.329Z,1478867276.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:56.713Z,1478867276.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:56.733Z,1478867276.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:57.109Z,1478867277.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:57.153Z,1478867277.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:57.513Z,1478867277.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:57.534Z,1478867277.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:57.914Z,1478867277.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:57.954Z,1478867277.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:58.313Z,1478867278.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:58.328Z,1478867278.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:58.713Z,1478867278.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:58.761Z,1478867278.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:59.113Z,1478867279.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:59.161Z,1478867279.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:59.513Z,1478867279.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:59.528Z,1478867279.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:27:59.909Z,1478867279.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:27:59.929Z,1478867279.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:00.313Z,1478867280.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:00.328Z,1478867280.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:00.709Z,1478867280.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:00.729Z,1478867280.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:01.113Z,1478867281.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:01.128Z,1478867281.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:01.509Z,1478867281.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:01.529Z,1478867281.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:01.906Z,1478867281.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:01.921Z,1478867281.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:02.313Z,1478867282.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:02.333Z,1478867282.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:02.713Z,1478867282.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:02.728Z,1478867282.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:03.109Z,1478867283.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:03.124Z,1478867283.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:03.513Z,1478867283.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:03.528Z,1478867283.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:03.914Z,1478867283.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:03.946Z,1478867283.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:04.309Z,1478867284.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:04.324Z,1478867284.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:04.709Z,1478867284.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:04.724Z,1478867284.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:05.109Z,1478867285.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:05.123Z,1478867285.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:05.513Z,1478867285.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:05.533Z,1478867285.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:05.909Z,1478867285.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:05.929Z,1478867285.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:06.313Z,1478867286.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:06.328Z,1478867286.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:06.714Z,1478867286.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:06.730Z,1478867286.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:07.113Z,1478867287.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:07.133Z,1478867287.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:07.529Z,1478867287.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:07.544Z,1478867287.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:07.913Z,1478867287.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:07.933Z,1478867287.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:08.313Z,1478867288.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:08.372Z,1478867288.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:08.713Z,1478867288.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:08.733Z,1478867288.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:09.109Z,1478867289.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:09.125Z,1478867289.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:09.513Z,1478867289.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:09.533Z,1478867289.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:09.913Z,1478867289.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:09.946Z,1478867289.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:10.313Z,1478867290.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:10.333Z,1478867290.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:10.713Z,1478867290.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:10.729Z,1478867290.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:11.109Z,1478867291.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:11.124Z,1478867291.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:11.513Z,1478867291.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:11.546Z,1478867291.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:11.913Z,1478867291.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:11.933Z,1478867291.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:12.313Z,1478867292.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:12.354Z,1478867292.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:12.713Z,1478867292.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:12.728Z,1478867292.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:13.109Z,1478867293.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:13.157Z,1478867293.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:16.574Z,1478867296.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:16.633Z,1478867296.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:16.752Z,1478867296.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:16.798Z,1478867296.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:17.134Z,1478867297.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:17.175Z,1478867297.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:17.533Z,1478867297.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:17.557Z,1478867297.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:17.946Z,1478867297.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:17.965Z,1478867297.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:18.333Z,1478867298.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:18.361Z,1478867298.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:18.730Z,1478867298.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:18.757Z,1478867298.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:19.134Z,1478867299.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:19.161Z,1478867299.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:19.533Z,1478867299.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:19.561Z,1478867299.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:19.933Z,1478867299.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:19.961Z,1478867299.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:20.345Z,1478867300.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:20.378Z,1478867300.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:20.733Z,1478867300.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:20.761Z,1478867300.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:21.133Z,1478867301.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:21.161Z,1478867301.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:21.534Z,1478867301.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:21.561Z,1478867301.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:21.933Z,1478867301.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:21.961Z,1478867301.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:22.333Z,1478867302.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:22.356Z,1478867302.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:22.740Z,1478867302.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:22.761Z,1478867302.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:23.157Z,1478867303.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:23.239Z,1478867303.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:23.540Z,1478867303.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:23.561Z,1478867303.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:23.948Z,1478867303.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:23.964Z,1478867303.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:24.344Z,1478867304.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:24.360Z,1478867304.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:24.733Z,1478867304.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:24.765Z,1478867304.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:25.148Z,1478867305.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:25.164Z,1478867305.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:25.533Z,1478867305.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:25.565Z,1478867305.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:25.944Z,1478867305.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:25.959Z,1478867305.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:26.333Z,1478867306.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:26.365Z,1478867306.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:26.733Z,1478867306.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:26.769Z,1478867306.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:27.141Z,1478867307.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:27.197Z,1478867307.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:27.538Z,1478867307.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:27.558Z,1478867307.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:27.936Z,1478867307.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:27.957Z,1478867307.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:28.339Z,1478867308.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:28.397Z,1478867308.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:28.733Z,1478867308.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:28.760Z,1478867308.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:29.141Z,1478867309.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:29.173Z,1478867309.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:29.536Z,1478867309.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:29.583Z,1478867309.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:29.941Z,1478867309.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:29.956Z,1478867309.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:30.336Z,1478867310.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:30.387Z,1478867310.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:30.738Z,1478867310.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:30.781Z,1478867310.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:31.145Z,1478867311.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:31.160Z,1478867311.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:31.541Z,1478867311.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:31.556Z,1478867311.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:31.940Z,1478867311.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:31.957Z,1478867311.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:32.345Z,1478867312.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:32.360Z,1478867312.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:32.740Z,1478867312.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:32.755Z,1478867312.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:33.144Z,1478867313.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:33.160Z,1478867313.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:33.548Z,1478867313.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:33.564Z,1478867313.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:33.933Z,1478867313.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:33.966Z,1478867313.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:34.333Z,1478867314.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:34.367Z,1478867314.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:34.740Z,1478867314.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:34.763Z,1478867314.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:35.133Z,1478867315.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:35.167Z,1478867315.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:35.533Z,1478867315.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:35.565Z,1478867315.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:35.933Z,1478867315.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:35.965Z,1478867315.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:36.333Z,1478867316.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:36.359Z,1478867316.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:36.734Z,1478867316.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:36.758Z,1478867316.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:37.142Z,1478867317.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:37.157Z,1478867317.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:37.542Z,1478867317.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:37.557Z,1478867317.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:37.941Z,1478867317.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:37.956Z,1478867317.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:38.340Z,1478867318.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:38.356Z,1478867318.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:38.736Z,1478867318.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:38.768Z,1478867318.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:39.133Z,1478867319.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:39.179Z,1478867319.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:39.533Z,1478867319.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:39.570Z,1478867319.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:39.933Z,1478867319.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:39.970Z,1478867319.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:40.333Z,1478867320.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:40.370Z,1478867320.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:40.733Z,1478867320.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:40.770Z,1478867320.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:41.166Z,1478867321.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:41.183Z,1478867321.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:41.533Z,1478867321.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:41.574Z,1478867321.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:41.933Z,1478867321.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:41.965Z,1478867321.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:42.333Z,1478867322.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:42.365Z,1478867322.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:42.733Z,1478867322.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:42.778Z,1478867322.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:43.140Z,1478867323.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:43.155Z,1478867323.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:43.540Z,1478867323.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:43.561Z,1478867323.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:43.936Z,1478867323.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:43.986Z,1478867323.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:44.340Z,1478867324.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:44.355Z,1478867324.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:44.741Z,1478867324.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:44.797Z,1478867324.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:45.133Z,1478867325.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:45.195Z,1478867325.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:45.533Z,1478867325.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:45.558Z,1478867325.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:45.933Z,1478867325.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:45.965Z,1478867325.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:46.333Z,1478867326.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:46.376Z,1478867326.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:46.733Z,1478867326.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:46.748Z,1478867326.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:47.133Z,1478867327.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:47.153Z,1478867327.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:47.538Z,1478867327.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:47.553Z,1478867327.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:47.933Z,1478867327.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:47.957Z,1478867327.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:48.339Z,1478867328.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:48.361Z,1478867328.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:48.740Z,1478867328.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:48.755Z,1478867328.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:49.141Z,1478867329.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:49.157Z,1478867329.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:49.548Z,1478867329.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:49.569Z,1478867329.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:49.940Z,1478867329.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:49.977Z,1478867329.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:50.333Z,1478867330.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:50.369Z,1478867330.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:50.733Z,1478867330.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:50.766Z,1478867330.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:51.133Z,1478867331.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:51.153Z,1478867331.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:51.533Z,1478867331.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:51.549Z,1478867331.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:51.937Z,1478867331.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:51.952Z,1478867331.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:52.341Z,1478867332.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:52.356Z,1478867332.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:52.740Z,1478867332.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:52.756Z,1478867332.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:53.145Z,1478867333.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:53.160Z,1478867333.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:53.540Z,1478867333.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:53.561Z,1478867333.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:53.940Z,1478867333.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:53.956Z,1478867333.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:54.344Z,1478867334.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:54.377Z,1478867334.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:54.733Z,1478867334.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:54.758Z,1478867334.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:55.133Z,1478867335.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:55.153Z,1478867335.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:55.540Z,1478867335.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:55.586Z,1478867335.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:55.944Z,1478867335.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:55.966Z,1478867335.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:56.339Z,1478867336.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:56.354Z,1478867336.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:56.740Z,1478867336.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:56.761Z,1478867336.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:57.140Z,1478867337.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:57.211Z,1478867337.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:57.541Z,1478867337.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:57.557Z,1478867337.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:57.948Z,1478867337.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:57.963Z,1478867337.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:58.333Z,1478867338.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:58.382Z,1478867338.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:58.733Z,1478867338.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:58.766Z,1478867338.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:59.148Z,1478867339.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:59.210Z,1478867339.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:59.533Z,1478867339.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:59.585Z,1478867339.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:28:59.933Z,1478867339.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:28:59.973Z,1478867339.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:00.333Z,1478867340.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:00.353Z,1478867340.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:00.733Z,1478867340.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:00.753Z,1478867340.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:01.133Z,1478867341.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:01.157Z,1478867341.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:01.545Z,1478867341.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:01.560Z,1478867341.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:01.937Z,1478867341.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:01.973Z,1478867341.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:02.341Z,1478867342.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:02.357Z,1478867342.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:02.744Z,1478867342.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:02.767Z,1478867342.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:03.137Z,1478867343.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:03.162Z,1478867343.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:03.533Z,1478867343.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:03.559Z,1478867343.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:03.937Z,1478867343.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:03.962Z,1478867343.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:04.333Z,1478867344.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:04.365Z,1478867344.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:04.737Z,1478867344.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:04.763Z,1478867344.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:05.141Z,1478867345.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:05.190Z,1478867345.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:05.533Z,1478867345.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:05.553Z,1478867345.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:05.936Z,1478867345.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:05.952Z,1478867345.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:06.345Z,1478867346.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:06.360Z,1478867346.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:06.740Z,1478867346.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:06.761Z,1478867346.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:07.133Z,1478867347.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:07.165Z,1478867347.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:07.533Z,1478867347.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:07.565Z,1478867347.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:07.935Z,1478867347.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:07.977Z,1478867347.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:08.333Z,1478867348.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:08.365Z,1478867348.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:08.733Z,1478867348.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:08.816Z,1478867348.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:09.133Z,1478867349.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:09.153Z,1478867349.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:09.540Z,1478867349.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:09.556Z,1478867349.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:09.941Z,1478867349.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:09.956Z,1478867349.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:10.344Z,1478867350.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:10.365Z,1478867350.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:10.740Z,1478867350.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:10.756Z,1478867350.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:11.141Z,1478867351.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:11.166Z,1478867351.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:11.533Z,1478867351.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:11.568Z,1478867351.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:11.933Z,1478867351.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:11.985Z,1478867351.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:12.333Z,1478867352.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:12.373Z,1478867352.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:12.733Z,1478867352.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:12.753Z,1478867352.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:13.133Z,1478867353.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:13.181Z,1478867353.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:16.491Z,1478867356.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:16.526Z,1478867356.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:16.606Z,1478867356.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:16.671Z,1478867356.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:16.983Z,1478867356.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:17.005Z,1478867357.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:17.384Z,1478867357.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:17.439Z,1478867357.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:17.781Z,1478867357.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:17.803Z,1478867357.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:18.184Z,1478867358.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:18.205Z,1478867358.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:18.585Z,1478867358.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:18.605Z,1478867358.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:18.984Z,1478867358.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:19.005Z,1478867359.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:19.388Z,1478867359.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:19.409Z,1478867359.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:19.777Z,1478867359.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:19.811Z,1478867359.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:20.177Z,1478867360.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:20.209Z,1478867360.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:20.577Z,1478867360.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:20.602Z,1478867360.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:20.992Z,1478867360.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:21.012Z,1478867361.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:21.377Z,1478867361.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:21.413Z,1478867361.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:21.777Z,1478867361.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:21.810Z,1478867361.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:22.177Z,1478867362.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:22.213Z,1478867362.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:22.577Z,1478867362.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:22.613Z,1478867362.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:22.985Z,1478867362.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:23.010Z,1478867363.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:23.381Z,1478867363.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:23.413Z,1478867363.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:23.777Z,1478867363.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:23.801Z,1478867363.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:24.192Z,1478867364.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:24.227Z,1478867364.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:24.577Z,1478867364.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:24.597Z,1478867364.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:24.985Z,1478867364.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:25.022Z,1478867365.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:25.381Z,1478867365.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:25.421Z,1478867365.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:25.785Z,1478867365.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:25.802Z,1478867365.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:26.185Z,1478867366.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:26.200Z,1478867366.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:26.583Z,1478867366.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:26.605Z,1478867366.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:26.988Z,1478867366.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:27.005Z,1478867367.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:27.384Z,1478867367.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:27.400Z,1478867367.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:27.784Z,1478867367.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:27.805Z,1478867367.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:28.193Z,1478867368.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:28.221Z,1478867368.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:28.577Z,1478867368.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:28.611Z,1478867368.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:28.981Z,1478867368.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:29.041Z,1478867369.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:29.399Z,1478867369.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:29.457Z,1478867369.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:29.783Z,1478867369.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:29.823Z,1478867369.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:30.182Z,1478867370.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:30.222Z,1478867370.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:30.581Z,1478867370.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:30.601Z,1478867370.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:30.981Z,1478867370.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:31.032Z,1478867371.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:31.380Z,1478867371.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:31.428Z,1478867371.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:31.785Z,1478867371.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:31.805Z,1478867371.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:32.185Z,1478867372.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:32.201Z,1478867372.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:32.583Z,1478867372.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:32.598Z,1478867372.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:32.983Z,1478867372.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:33.010Z,1478867373.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:33.391Z,1478867373.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:33.406Z,1478867373.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:33.785Z,1478867373.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:33.805Z,1478867373.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:34.180Z,1478867374.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:34.212Z,1478867374.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:34.585Z,1478867374.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:34.601Z,1478867374.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:34.985Z,1478867374.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:35.005Z,1478867375.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:35.380Z,1478867375.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:35.404Z,1478867375.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:35.785Z,1478867375.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:35.801Z,1478867375.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:36.185Z,1478867376.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:36.205Z,1478867376.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:36.580Z,1478867376.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:36.604Z,1478867376.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:36.985Z,1478867376.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:37.001Z,1478867377.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:37.384Z,1478867377.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:37.405Z,1478867377.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:37.784Z,1478867377.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:37.812Z,1478867377.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:38.177Z,1478867378.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:38.203Z,1478867378.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:38.594Z,1478867378.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:38.609Z,1478867378.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:38.993Z,1478867378.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:39.009Z,1478867379.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:39.381Z,1478867379.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:39.417Z,1478867379.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:39.777Z,1478867379.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:39.805Z,1478867379.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:40.185Z,1478867380.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:40.219Z,1478867380.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:40.585Z,1478867380.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:40.619Z,1478867380.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:40.978Z,1478867380.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:41.030Z,1478867381.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:41.378Z,1478867381.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:41.418Z,1478867381.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:41.778Z,1478867381.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:41.813Z,1478867381.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:42.184Z,1478867382.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:42.215Z,1478867382.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:42.577Z,1478867382.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:42.598Z,1478867382.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:42.982Z,1478867382.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:43.003Z,1478867383.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:43.384Z,1478867383.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:43.465Z,1478867383.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:43.777Z,1478867383.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:43.813Z,1478867383.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:44.177Z,1478867384.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:44.193Z,1478867384.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:44.577Z,1478867384.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:44.626Z,1478867384.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:45.005Z,1478867385.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:45.029Z,1478867385.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:45.377Z,1478867385.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:45.422Z,1478867385.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:45.785Z,1478867385.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:45.837Z,1478867385.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:46.181Z,1478867386.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:46.196Z,1478867386.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:46.588Z,1478867386.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:46.624Z,1478867386.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:46.977Z,1478867386.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:47.013Z,1478867387.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:47.377Z,1478867387.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:47.413Z,1478867387.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:47.777Z,1478867387.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:47.805Z,1478867387.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:48.177Z,1478867388.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:48.220Z,1478867388.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:48.577Z,1478867388.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:48.620Z,1478867388.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:48.985Z,1478867388.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:49.017Z,1478867389.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:49.377Z,1478867389.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:49.420Z,1478867389.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:49.777Z,1478867389.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:49.792Z,1478867389.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:50.177Z,1478867390.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:50.192Z,1478867390.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:50.577Z,1478867390.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:50.597Z,1478867390.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:50.985Z,1478867390.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:50.000Z,1478867391.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:51.381Z,1478867391.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:51.396Z,1478867391.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:51.783Z,1478867391.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:51.805Z,1478867391.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:52.184Z,1478867392.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:52.199Z,1478867392.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:52.584Z,1478867392.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:52.600Z,1478867392.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:52.984Z,1478867392.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:53.001Z,1478867393.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:53.383Z,1478867393.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:53.406Z,1478867393.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:53.777Z,1478867393.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:53.809Z,1478867393.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:54.177Z,1478867394.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:54.211Z,1478867394.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:54.577Z,1478867394.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:54.609Z,1478867394.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:54.991Z,1478867394.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:55.011Z,1478867395.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:55.377Z,1478867395.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:55.411Z,1478867395.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:55.777Z,1478867395.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:55.803Z,1478867395.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:56.177Z,1478867396.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:56.209Z,1478867396.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:56.577Z,1478867396.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:56.611Z,1478867396.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:56.977Z,1478867396.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:57.003Z,1478867397.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:57.377Z,1478867397.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:57.403Z,1478867397.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:57.792Z,1478867397.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:57.893Z,1478867397.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:58.182Z,1478867398.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:58.210Z,1478867398.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:58.589Z,1478867398.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:58.605Z,1478867398.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:58.984Z,1478867398.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:59.022Z,1478867399.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:59.385Z,1478867399.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:59.405Z,1478867399.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:29:59.780Z,1478867399.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:29:59.840Z,1478867399.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:00.185Z,1478867400.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:00.242Z,1478867400.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:00.584Z,1478867400.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:00.600Z,1478867400.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:00.984Z,1478867400.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:01.005Z,1478867401.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:01.387Z,1478867401.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:01.415Z,1478867401.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:01.797Z,1478867401.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:01.821Z,1478867401.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:02.188Z,1478867402.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:02.211Z,1478867402.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:02.577Z,1478867402.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:02.609Z,1478867402.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:02.977Z,1478867402.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:03.011Z,1478867403.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:03.392Z,1478867403.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:03.421Z,1478867403.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:03.777Z,1478867403.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:03.809Z,1478867403.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:04.177Z,1478867404.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:04.204Z,1478867404.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:04.581Z,1478867404.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:04.617Z,1478867404.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:04.989Z,1478867404.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:05.009Z,1478867405.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:05.383Z,1478867405.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:05.398Z,1478867405.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:05.785Z,1478867405.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:05.805Z,1478867405.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:06.184Z,1478867406.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:06.199Z,1478867406.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:06.584Z,1478867406.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:06.599Z,1478867406.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:06.985Z,1478867406.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:07.005Z,1478867407.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:07.389Z,1478867407.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:07.404Z,1478867407.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:07.785Z,1478867407.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:07.805Z,1478867407.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:08.184Z,1478867408.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:08.212Z,1478867408.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:08.577Z,1478867408.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:08.602Z,1478867408.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:08.977Z,1478867408.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:09.011Z,1478867409.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:09.377Z,1478867409.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:09.412Z,1478867409.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:09.777Z,1478867409.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:09.811Z,1478867409.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:10.177Z,1478867410.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:10.202Z,1478867410.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:10.593Z,1478867410.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:10.613Z,1478867410.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:10.977Z,1478867410.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:11.013Z,1478867411.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:11.377Z,1478867411.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:11.413Z,1478867411.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:11.781Z,1478867411.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:11.807Z,1478867411.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:12.177Z,1478867412.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:12.230Z,1478867412.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:12.581Z,1478867412.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:12.637Z,1478867412.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:12.657Z,1478867412.657 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T12:30:12.658Z,1478867412.658 [Default:CheckIn:C.Wait] Stopped
2016-11-11T12:30:12.658Z,1478867412.658 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T12:30:12.658Z,1478867412.658 [Default:CheckIn:D] Running Loop=1
2016-11-11T12:30:12.977Z,1478867412.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:13.017Z,1478867413.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:13.035Z,1478867413.035 [Default:CheckIn:D] Stopped
2016-11-11T12:30:13.036Z,1478867413.036 [Default:CheckIn:E] Running Loop=1
2016-11-11T12:30:13.377Z,1478867413.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:13.393Z,1478867413.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:13.434Z,1478867413.434 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 460.195410 min 
2016-11-11T12:30:13.434Z,1478867413.434 [Default:CheckIn:E] Stopped
2016-11-11T12:30:13.434Z,1478867413.434 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T12:30:13.434Z,1478867413.434 [Default:CheckIn] Stopped
2016-11-11T12:30:13.434Z,1478867413.434 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T12:30:13.435Z,1478867413.434 [Default:CheckIn](INFO): Running loop #45
2016-11-11T12:30:13.435Z,1478867413.435 [Default:CheckIn] Running Loop=45
2016-11-11T12:30:13.435Z,1478867413.435 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T12:30:13.435Z,1478867413.435 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T12:30:16.978Z,1478867416.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:17.023Z,1478867417.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:17.109Z,1478867417.109 [NAL9602](INFO): Powering up
2016-11-11T12:30:17.128Z,1478867417.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:17.144Z,1478867417.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:17.479Z,1478867417.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:17.537Z,1478867417.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:17.879Z,1478867417.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:17.933Z,1478867417.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:18.282Z,1478867418.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:18.298Z,1478867418.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:18.700Z,1478867418.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:18.742Z,1478867418.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:19.085Z,1478867419.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:19.134Z,1478867419.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:19.486Z,1478867419.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:19.494Z,1478867419.494 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T12:30:19.536Z,1478867419.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:19.882Z,1478867419.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:19.897Z,1478867419.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:20.275Z,1478867420.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:20.314Z,1478867420.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:20.712Z,1478867420.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:20.750Z,1478867420.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:21.081Z,1478867421.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:21.106Z,1478867421.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:21.483Z,1478867421.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:21.505Z,1478867421.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:21.873Z,1478867421.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:21.913Z,1478867421.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:22.273Z,1478867422.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:22.309Z,1478867422.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:22.678Z,1478867422.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:22.713Z,1478867422.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:23.074Z,1478867423.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:23.113Z,1478867423.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:23.473Z,1478867423.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:23.515Z,1478867423.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:23.873Z,1478867423.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:23.915Z,1478867423.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:24.278Z,1478867424.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:24.312Z,1478867424.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:24.674Z,1478867424.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:24.693Z,1478867424.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:25.080Z,1478867425.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:25.181Z,1478867425.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:25.477Z,1478867425.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:25.496Z,1478867425.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:25.884Z,1478867425.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:25.904Z,1478867425.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:26.278Z,1478867426.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:26.313Z,1478867426.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:26.681Z,1478867426.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:26.713Z,1478867426.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:27.084Z,1478867427.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:27.101Z,1478867427.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:27.476Z,1478867427.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:27.513Z,1478867427.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:27.885Z,1478867427.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:27.921Z,1478867427.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:28.257Z,1478867428.257 [NAL9602](INFO): NAL9602 initialized
2016-11-11T12:30:28.274Z,1478867428.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:28.322Z,1478867428.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:28.697Z,1478867428.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:28.748Z,1478867428.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:29.061Z,1478867429.061 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T12:30:29.061Z,1478867429.061 [NAL9602] Data Fault, FailCount= 1
2016-11-11T12:30:29.061Z,1478867429.061 [NAL9602](ERROR): Data Fault
2016-11-11T12:30:29.099Z,1478867429.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:29.126Z,1478867429.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:29.168Z,1478867429.168 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T12:30:29.457Z,1478867429.457 [NAL9602](INFO): Powering down
2016-11-11T12:30:29.476Z,1478867429.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:29.513Z,1478867429.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:29.873Z,1478867429.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:29.941Z,1478867429.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:30.273Z,1478867430.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:30.333Z,1478867430.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:30.370Z,1478867430.370 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T12:30:30.370Z,1478867430.370 [NAL9602] No Fault, FailCount= 1
2016-11-11T12:30:30.692Z,1478867430.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:30.781Z,1478867430.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:31.075Z,1478867431.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:31.133Z,1478867431.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:31.476Z,1478867431.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:31.518Z,1478867431.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:31.881Z,1478867431.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:31.887Z,1478867431.888 [PNI_TCM](ERROR): CRC does not match. Expected:0x6744 got:0x11385
2016-11-11T12:30:31.939Z,1478867431.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:32.278Z,1478867432.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:32.334Z,1478867432.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:32.720Z,1478867432.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:32.769Z,1478867432.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:33.082Z,1478867433.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:33.100Z,1478867433.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:33.483Z,1478867433.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:33.498Z,1478867433.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:33.881Z,1478867433.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:33.900Z,1478867433.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:34.280Z,1478867434.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:34.296Z,1478867434.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:34.658Z,1478867434.658 [NAL9602](INFO): Powering up NAL9602
2016-11-11T12:30:34.694Z,1478867434.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:34.738Z,1478867434.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:35.079Z,1478867435.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:35.111Z,1478867435.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:35.479Z,1478867435.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:35.494Z,1478867435.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:35.876Z,1478867435.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:35.891Z,1478867435.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:36.281Z,1478867436.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:36.298Z,1478867436.298 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:36.298Z,1478867436.298 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 134
2016-11-11T12:30:36.298Z,1478867436.298 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:30:36.304Z,1478867436.304 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:36.305Z,1478867436.305 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 134
2016-11-11T12:30:36.305Z,1478867436.305 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:30:36.307Z,1478867436.307 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:36.307Z,1478867436.307 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 134
2016-11-11T12:30:36.307Z,1478867436.307 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:30:36.338Z,1478867436.338 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:30:36.338Z,1478867436.338 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:30:36.338Z,1478867436.338 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:30:36.682Z,1478867436.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:36.785Z,1478867436.785 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:30:36.785Z,1478867436.785 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 134
2016-11-11T12:30:36.786Z,1478867436.786 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:30:36.786Z,1478867436.786 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 134
2016-11-11T12:30:36.795Z,1478867436.796 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:30:36.796Z,1478867436.796 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 134
2016-11-11T12:30:37.075Z,1478867437.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:37.107Z,1478867437.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:30:37.108Z,1478867437.108 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:30:37.108Z,1478867437.108 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:30:37.113Z,1478867437.113 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:30:37.113Z,1478867437.113 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:30:37.113Z,1478867437.114 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:30:37.114Z,1478867437.114 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:30:37.114Z,1478867437.114 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:30:37.115Z,1478867437.115 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:30:37.473Z,1478867437.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:37.500Z,1478867437.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:37.874Z,1478867437.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:37.913Z,1478867437.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:38.275Z,1478867438.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:38.290Z,1478867438.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:38.678Z,1478867438.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:38.694Z,1478867438.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:39.076Z,1478867439.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:39.155Z,1478867439.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:39.482Z,1478867439.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:39.498Z,1478867439.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:39.883Z,1478867439.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:39.898Z,1478867439.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:40.280Z,1478867440.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:40.305Z,1478867440.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:40.680Z,1478867440.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:40.701Z,1478867440.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:41.083Z,1478867441.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:41.169Z,1478867441.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:41.479Z,1478867441.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:41.509Z,1478867441.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:41.873Z,1478867441.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:41.905Z,1478867441.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:42.273Z,1478867442.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:42.309Z,1478867442.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:42.684Z,1478867442.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:42.729Z,1478867442.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:43.075Z,1478867443.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:43.121Z,1478867443.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:43.481Z,1478867443.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:43.521Z,1478867443.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:43.876Z,1478867443.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:43.891Z,1478867443.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:44.283Z,1478867444.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:44.364Z,1478867444.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:44.710Z,1478867444.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:44.752Z,1478867444.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:45.093Z,1478867445.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:45.114Z,1478867445.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:45.457Z,1478867445.457 [NAL9602](INFO): NAL9602 initialized
2016-11-11T12:30:45.480Z,1478867445.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:45.531Z,1478867445.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:45.884Z,1478867445.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:45.905Z,1478867445.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:46.295Z,1478867446.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:46.348Z,1478867446.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:46.699Z,1478867446.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:46.770Z,1478867446.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:47.104Z,1478867447.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:47.120Z,1478867447.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:47.480Z,1478867447.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:47.516Z,1478867447.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:47.877Z,1478867447.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:47.919Z,1478867447.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:48.278Z,1478867448.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:48.294Z,1478867448.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:48.695Z,1478867448.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:48.750Z,1478867448.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:49.095Z,1478867449.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:49.126Z,1478867449.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:49.492Z,1478867449.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:49.507Z,1478867449.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:49.876Z,1478867449.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:49.910Z,1478867449.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:50.280Z,1478867450.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:50.295Z,1478867450.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:50.685Z,1478867450.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:50.706Z,1478867450.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:51.073Z,1478867451.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:51.105Z,1478867451.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:51.473Z,1478867451.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:51.498Z,1478867451.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:51.874Z,1478867451.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:51.913Z,1478867451.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:52.275Z,1478867452.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:52.307Z,1478867452.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:52.673Z,1478867452.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:52.709Z,1478867452.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:53.113Z,1478867453.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:53.136Z,1478867453.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:53.488Z,1478867453.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:53.503Z,1478867453.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:53.892Z,1478867453.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:53.913Z,1478867453.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:54.291Z,1478867454.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:54.310Z,1478867454.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:54.695Z,1478867454.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:54.710Z,1478867454.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:55.109Z,1478867455.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:55.175Z,1478867455.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:55.474Z,1478867455.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:55.501Z,1478867455.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:55.878Z,1478867455.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:55.905Z,1478867455.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:56.276Z,1478867456.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:56.317Z,1478867456.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:56.689Z,1478867456.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:56.729Z,1478867456.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:57.078Z,1478867457.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:57.100Z,1478867457.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:57.476Z,1478867457.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:57.505Z,1478867457.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:57.884Z,1478867457.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:57.912Z,1478867457.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:58.277Z,1478867458.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:58.299Z,1478867458.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:58.697Z,1478867458.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:58.789Z,1478867458.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:59.096Z,1478867459.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:59.127Z,1478867459.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:59.491Z,1478867459.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:59.512Z,1478867459.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:30:59.890Z,1478867459.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:30:59.941Z,1478867459.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:00.290Z,1478867460.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:00.306Z,1478867460.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:00.698Z,1478867460.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:00.743Z,1478867460.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:01.081Z,1478867461.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:01.139Z,1478867461.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:01.477Z,1478867461.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:01.501Z,1478867461.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:01.876Z,1478867461.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:01.913Z,1478867461.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:02.286Z,1478867462.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:02.301Z,1478867462.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:02.696Z,1478867462.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:02.732Z,1478867462.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:03.087Z,1478867463.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:03.123Z,1478867463.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:03.474Z,1478867463.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:03.512Z,1478867463.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:03.879Z,1478867463.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:03.895Z,1478867463.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:04.296Z,1478867464.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:04.327Z,1478867464.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:04.698Z,1478867464.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:04.757Z,1478867464.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:05.093Z,1478867465.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:05.108Z,1478867465.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:05.492Z,1478867465.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:05.513Z,1478867465.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:05.873Z,1478867465.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:05.901Z,1478867465.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:06.273Z,1478867466.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:06.302Z,1478867466.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:06.673Z,1478867466.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:06.709Z,1478867466.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:07.117Z,1478867467.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:07.161Z,1478867467.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:07.474Z,1478867467.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:07.509Z,1478867467.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:07.878Z,1478867467.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:07.910Z,1478867467.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:08.280Z,1478867468.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:08.295Z,1478867468.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:08.682Z,1478867468.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:08.697Z,1478867468.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:09.105Z,1478867469.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:09.146Z,1478867469.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:09.496Z,1478867469.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:09.522Z,1478867469.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:09.888Z,1478867469.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:09.922Z,1478867469.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:10.288Z,1478867470.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:10.320Z,1478867470.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:10.684Z,1478867470.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:10.699Z,1478867470.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:11.081Z,1478867471.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:11.096Z,1478867471.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:11.484Z,1478867471.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:11.500Z,1478867471.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:11.880Z,1478867471.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:11.896Z,1478867471.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:12.280Z,1478867472.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:12.308Z,1478867472.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:12.681Z,1478867472.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:12.697Z,1478867472.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:13.085Z,1478867473.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:13.149Z,1478867473.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:13.474Z,1478867473.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:13.529Z,1478867473.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:16.964Z,1478867476.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:16.985Z,1478867476.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:17.093Z,1478867477.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:17.117Z,1478867477.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:17.478Z,1478867477.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:17.500Z,1478867477.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:17.880Z,1478867477.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:17.929Z,1478867477.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:18.280Z,1478867478.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:18.296Z,1478867478.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:18.749Z,1478867478.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:18.813Z,1478867478.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:19.073Z,1478867479.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:19.137Z,1478867479.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:19.473Z,1478867479.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:19.505Z,1478867479.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:19.873Z,1478867479.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:19.908Z,1478867479.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:20.273Z,1478867480.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:20.305Z,1478867480.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:20.673Z,1478867480.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:20.705Z,1478867480.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:21.100Z,1478867481.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:21.147Z,1478867481.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:21.473Z,1478867481.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:21.513Z,1478867481.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:21.873Z,1478867481.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:21.889Z,1478867481.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:22.282Z,1478867482.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:22.318Z,1478867482.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:22.674Z,1478867482.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:22.693Z,1478867482.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:23.093Z,1478867483.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:23.138Z,1478867483.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:23.481Z,1478867483.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:23.498Z,1478867483.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:23.888Z,1478867483.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:23.904Z,1478867483.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:24.284Z,1478867484.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:24.305Z,1478867484.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:24.682Z,1478867484.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:24.697Z,1478867484.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:25.085Z,1478867485.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:25.105Z,1478867485.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:25.480Z,1478867485.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:25.496Z,1478867485.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:25.890Z,1478867485.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:25.905Z,1478867485.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:26.273Z,1478867486.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:26.305Z,1478867486.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:26.689Z,1478867486.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:26.704Z,1478867486.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:27.088Z,1478867487.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:27.116Z,1478867487.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:27.473Z,1478867487.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:27.506Z,1478867487.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:27.877Z,1478867487.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:27.909Z,1478867487.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:28.288Z,1478867488.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:28.321Z,1478867488.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:28.710Z,1478867488.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:28.726Z,1478867488.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:29.073Z,1478867489.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:29.114Z,1478867489.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:29.474Z,1478867489.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:29.490Z,1478867489.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:29.873Z,1478867489.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:29.893Z,1478867489.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:30.279Z,1478867490.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:30.294Z,1478867490.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:30.690Z,1478867490.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:30.706Z,1478867490.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:31.077Z,1478867491.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:31.104Z,1478867491.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:31.476Z,1478867491.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:31.553Z,1478867491.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:31.881Z,1478867491.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:31.905Z,1478867491.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:32.273Z,1478867492.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:32.331Z,1478867492.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:32.698Z,1478867492.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:32.756Z,1478867492.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:33.078Z,1478867493.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:33.135Z,1478867493.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:33.473Z,1478867493.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:33.539Z,1478867493.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:33.873Z,1478867493.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:33.911Z,1478867493.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:34.278Z,1478867494.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:34.310Z,1478867494.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:34.673Z,1478867494.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:34.709Z,1478867494.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:35.077Z,1478867495.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:35.117Z,1478867495.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:35.485Z,1478867495.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:35.525Z,1478867495.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:35.876Z,1478867495.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:35.891Z,1478867495.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:36.279Z,1478867496.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:36.294Z,1478867496.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:36.682Z,1478867496.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:36.710Z,1478867496.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:37.092Z,1478867497.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:37.119Z,1478867497.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:37.491Z,1478867497.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:37.506Z,1478867497.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:37.884Z,1478867497.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:37.912Z,1478867497.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:38.273Z,1478867498.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:38.306Z,1478867498.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:38.679Z,1478867498.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:38.695Z,1478867498.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:39.081Z,1478867499.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:39.097Z,1478867499.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:39.476Z,1478867499.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:39.509Z,1478867499.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:39.881Z,1478867499.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:39.897Z,1478867499.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:40.288Z,1478867500.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:40.309Z,1478867500.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:40.689Z,1478867500.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:40.709Z,1478867500.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:41.073Z,1478867501.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:41.105Z,1478867501.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:41.474Z,1478867501.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:41.506Z,1478867501.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:41.873Z,1478867501.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:41.913Z,1478867501.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:42.275Z,1478867502.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:42.290Z,1478867502.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:42.693Z,1478867502.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:42.718Z,1478867502.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:43.082Z,1478867503.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:43.110Z,1478867503.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:43.478Z,1478867503.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:43.493Z,1478867503.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:43.878Z,1478867503.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:43.897Z,1478867503.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:44.276Z,1478867504.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:44.292Z,1478867504.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:44.686Z,1478867504.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:44.702Z,1478867504.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:45.077Z,1478867505.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:45.101Z,1478867505.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:45.492Z,1478867505.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:45.565Z,1478867505.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:45.891Z,1478867505.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:45.908Z,1478867505.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:46.273Z,1478867506.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:46.312Z,1478867506.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:46.682Z,1478867506.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:46.761Z,1478867506.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:47.073Z,1478867507.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:47.106Z,1478867507.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:47.473Z,1478867507.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:47.518Z,1478867507.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:47.873Z,1478867507.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:47.922Z,1478867507.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:48.273Z,1478867508.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:48.300Z,1478867508.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:48.673Z,1478867508.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:48.709Z,1478867508.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:49.081Z,1478867509.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:49.106Z,1478867509.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:49.481Z,1478867509.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:49.501Z,1478867509.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:49.876Z,1478867509.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:49.905Z,1478867509.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:50.288Z,1478867510.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:50.303Z,1478867510.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:50.680Z,1478867510.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:50.696Z,1478867510.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:51.091Z,1478867511.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:51.113Z,1478867511.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:51.481Z,1478867511.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:51.509Z,1478867511.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:51.873Z,1478867511.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:51.905Z,1478867511.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:52.273Z,1478867512.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:52.306Z,1478867512.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:52.673Z,1478867512.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:52.698Z,1478867512.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:53.077Z,1478867513.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:53.109Z,1478867513.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:53.473Z,1478867513.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:53.505Z,1478867513.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:53.873Z,1478867513.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:53.905Z,1478867513.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:54.273Z,1478867514.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:54.305Z,1478867514.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:54.690Z,1478867514.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:54.705Z,1478867514.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:55.073Z,1478867515.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:55.098Z,1478867515.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:55.473Z,1478867515.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:55.505Z,1478867515.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:55.873Z,1478867515.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:55.900Z,1478867515.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:56.277Z,1478867516.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:56.309Z,1478867516.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:56.693Z,1478867516.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:56.714Z,1478867516.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:57.073Z,1478867517.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:57.105Z,1478867517.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:57.480Z,1478867517.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:57.501Z,1478867517.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:57.880Z,1478867517.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:57.896Z,1478867517.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:58.290Z,1478867518.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:58.305Z,1478867518.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:58.689Z,1478867518.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:58.704Z,1478867518.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:59.073Z,1478867519.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:59.105Z,1478867519.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:59.474Z,1478867519.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:59.500Z,1478867519.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:31:59.873Z,1478867519.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:31:59.953Z,1478867519.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:00.273Z,1478867520.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:00.305Z,1478867520.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:00.678Z,1478867520.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:00.740Z,1478867520.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:01.058Z,1478867521.058 [NAL9602](INFO): SBD MO Status=2, MOMSN=346, MT Status=2, MTMSN=0
2016-11-11T12:32:01.058Z,1478867521.058 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T12:32:01.075Z,1478867521.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:01.113Z,1478867521.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:01.484Z,1478867521.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:01.546Z,1478867521.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:01.877Z,1478867521.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:01.923Z,1478867521.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:02.273Z,1478867522.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:02.309Z,1478867522.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:02.673Z,1478867522.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:02.710Z,1478867522.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:03.073Z,1478867523.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:03.112Z,1478867523.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:03.473Z,1478867523.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:03.509Z,1478867523.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:03.873Z,1478867523.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:03.909Z,1478867523.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:04.274Z,1478867524.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:04.309Z,1478867524.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:04.677Z,1478867524.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:04.713Z,1478867524.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:05.073Z,1478867525.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:05.089Z,1478867525.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:05.492Z,1478867525.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:05.526Z,1478867525.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:05.888Z,1478867525.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:05.916Z,1478867525.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:06.292Z,1478867526.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:06.323Z,1478867526.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:06.687Z,1478867526.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:06.702Z,1478867526.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:07.083Z,1478867527.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:07.099Z,1478867527.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:07.484Z,1478867527.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:07.500Z,1478867527.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:07.882Z,1478867527.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:07.909Z,1478867527.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:08.281Z,1478867528.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:08.307Z,1478867528.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:08.681Z,1478867528.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:08.707Z,1478867528.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:09.073Z,1478867529.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:09.109Z,1478867529.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:09.474Z,1478867529.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:09.505Z,1478867529.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:09.873Z,1478867529.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:09.909Z,1478867529.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:10.281Z,1478867530.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:10.316Z,1478867530.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:10.696Z,1478867530.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:10.721Z,1478867530.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:11.096Z,1478867531.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:11.120Z,1478867531.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:11.485Z,1478867531.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:11.521Z,1478867531.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:11.888Z,1478867531.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:11.904Z,1478867531.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:12.289Z,1478867532.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:12.305Z,1478867532.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:12.689Z,1478867532.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:12.704Z,1478867532.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:13.089Z,1478867533.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:13.109Z,1478867533.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:13.474Z,1478867533.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:13.506Z,1478867533.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:16.811Z,1478867536.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:16.881Z,1478867536.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:17.010Z,1478867537.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:17.038Z,1478867537.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:17.364Z,1478867537.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:17.402Z,1478867537.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:17.760Z,1478867537.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:17.775Z,1478867537.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:18.159Z,1478867538.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:18.209Z,1478867538.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:18.559Z,1478867538.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:18.611Z,1478867538.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:18.990Z,1478867538.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:19.047Z,1478867539.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:19.364Z,1478867539.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:19.387Z,1478867539.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:19.775Z,1478867539.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:19.790Z,1478867539.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:20.151Z,1478867540.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:20.173Z,1478867540.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:20.567Z,1478867540.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:20.603Z,1478867540.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:20.955Z,1478867540.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:20.970Z,1478867540.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:21.359Z,1478867541.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:21.374Z,1478867541.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:21.754Z,1478867541.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:21.778Z,1478867541.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:22.159Z,1478867542.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:22.174Z,1478867542.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:22.560Z,1478867542.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:22.596Z,1478867542.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:22.955Z,1478867542.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:22.988Z,1478867542.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:23.351Z,1478867543.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:23.385Z,1478867543.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:23.773Z,1478867543.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:23.788Z,1478867543.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:24.172Z,1478867544.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:24.209Z,1478867544.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:24.558Z,1478867544.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:24.606Z,1478867544.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:24.953Z,1478867544.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:24.991Z,1478867544.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:25.354Z,1478867545.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:25.381Z,1478867545.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:25.756Z,1478867545.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:25.796Z,1478867545.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:26.161Z,1478867546.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:26.186Z,1478867546.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:26.560Z,1478867546.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:26.575Z,1478867546.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:26.962Z,1478867546.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:26.978Z,1478867546.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:27.370Z,1478867547.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:27.401Z,1478867547.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:27.761Z,1478867547.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:27.797Z,1478867547.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:28.166Z,1478867548.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:28.213Z,1478867548.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:28.567Z,1478867548.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:28.663Z,1478867548.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:28.975Z,1478867548.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:29.025Z,1478867549.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:29.372Z,1478867549.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:29.391Z,1478867549.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:29.785Z,1478867549.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:29.830Z,1478867549.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:30.164Z,1478867550.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:30.210Z,1478867550.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:30.561Z,1478867550.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:30.637Z,1478867550.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:30.972Z,1478867550.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:30.998Z,1478867550.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:31.360Z,1478867551.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:31.402Z,1478867551.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:31.763Z,1478867551.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:31.807Z,1478867551.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:32.164Z,1478867552.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:32.227Z,1478867552.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:32.561Z,1478867552.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:32.586Z,1478867552.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:32.971Z,1478867552.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:33.035Z,1478867553.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:33.357Z,1478867553.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:33.407Z,1478867553.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:33.760Z,1478867553.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:33.769Z,1478867553.769 [BPC1](ERROR): Failed to receive battery data
2016-11-11T12:32:33.769Z,1478867553.769 [BPC1] Communications Fault, FailCount= 1
2016-11-11T12:32:33.769Z,1478867553.769 [BPC1](ERROR): Communications Fault
2016-11-11T12:32:33.786Z,1478867553.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:33.879Z,1478867553.879 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T12:32:34.162Z,1478867554.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:34.217Z,1478867554.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:34.562Z,1478867554.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:34.593Z,1478867554.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:34.953Z,1478867554.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:34.982Z,1478867554.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:35.035Z,1478867555.035 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:32:35.035Z,1478867555.035 [BPC1] No Fault, FailCount= 1
2016-11-11T12:32:35.360Z,1478867555.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:35.458Z,1478867555.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:35.761Z,1478867555.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:35.776Z,1478867555.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:36.166Z,1478867556.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:36.216Z,1478867556.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:36.571Z,1478867556.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:36.586Z,1478867556.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:36.975Z,1478867556.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:36.990Z,1478867556.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:37.368Z,1478867557.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:37.383Z,1478867557.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:37.769Z,1478867557.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:37.784Z,1478867557.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:38.151Z,1478867558.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:38.206Z,1478867558.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:38.551Z,1478867558.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:38.581Z,1478867558.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:38.979Z,1478867558.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:39.005Z,1478867559.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:39.353Z,1478867559.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:39.381Z,1478867559.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:39.752Z,1478867559.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:39.790Z,1478867559.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:40.159Z,1478867560.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:40.174Z,1478867560.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:40.583Z,1478867560.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:40.598Z,1478867560.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:40.977Z,1478867560.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:41.060Z,1478867561.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:41.355Z,1478867561.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:41.455Z,1478867561.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:41.755Z,1478867561.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:41.783Z,1478867561.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:42.156Z,1478867562.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:42.184Z,1478867562.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:42.639Z,1478867562.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:42.725Z,1478867562.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:42.962Z,1478867562.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:43.017Z,1478867563.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:43.357Z,1478867563.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:43.386Z,1478867563.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:43.750Z,1478867563.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:43.794Z,1478867563.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:44.151Z,1478867564.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:44.201Z,1478867564.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:44.552Z,1478867564.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:44.608Z,1478867564.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:44.988Z,1478867564.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:45.056Z,1478867565.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:45.366Z,1478867565.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:45.406Z,1478867565.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:45.761Z,1478867565.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:45.798Z,1478867565.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:46.159Z,1478867566.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:46.184Z,1478867566.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:46.551Z,1478867566.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:46.593Z,1478867566.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:46.974Z,1478867566.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:47.072Z,1478867567.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:47.359Z,1478867567.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:47.384Z,1478867567.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:47.762Z,1478867567.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:47.823Z,1478867567.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:48.152Z,1478867568.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:48.232Z,1478867568.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:48.550Z,1478867568.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:48.586Z,1478867568.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:48.953Z,1478867568.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:49.006Z,1478867569.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:49.350Z,1478867569.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:49.415Z,1478867569.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:49.767Z,1478867569.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:49.811Z,1478867569.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:50.163Z,1478867570.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:50.206Z,1478867570.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:50.558Z,1478867570.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:50.586Z,1478867570.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:50.952Z,1478867570.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:50.988Z,1478867570.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:51.351Z,1478867571.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:51.401Z,1478867571.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:51.751Z,1478867571.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:51.792Z,1478867571.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:52.148Z,1478867572.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:52.195Z,1478867572.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:52.564Z,1478867572.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:52.638Z,1478867572.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:52.952Z,1478867572.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:52.972Z,1478867572.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:53.360Z,1478867573.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:53.393Z,1478867573.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:53.763Z,1478867573.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:53.790Z,1478867573.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:54.160Z,1478867574.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:54.195Z,1478867574.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:54.564Z,1478867574.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:54.588Z,1478867574.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:54.954Z,1478867574.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:54.990Z,1478867574.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:55.349Z,1478867575.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:55.389Z,1478867575.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:55.749Z,1478867575.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:55.770Z,1478867575.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:56.156Z,1478867576.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:56.172Z,1478867576.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:56.563Z,1478867576.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:56.621Z,1478867576.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:56.952Z,1478867576.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:56.978Z,1478867576.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:57.357Z,1478867577.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:57.374Z,1478867577.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:57.749Z,1478867577.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:57.776Z,1478867577.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:58.165Z,1478867578.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:58.181Z,1478867578.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:58.561Z,1478867578.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:58.577Z,1478867578.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:58.953Z,1478867578.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:58.994Z,1478867578.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:59.349Z,1478867579.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:59.385Z,1478867579.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:32:59.749Z,1478867579.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:32:59.794Z,1478867579.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:00.161Z,1478867580.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:00.197Z,1478867580.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:00.553Z,1478867580.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:00.576Z,1478867580.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:00.959Z,1478867580.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:00.998Z,1478867580.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:01.356Z,1478867581.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:01.417Z,1478867581.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:01.760Z,1478867581.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:01.776Z,1478867581.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:02.172Z,1478867582.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:02.215Z,1478867582.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:02.568Z,1478867582.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:02.589Z,1478867582.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:02.960Z,1478867582.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:03.017Z,1478867583.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:03.349Z,1478867583.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:03.398Z,1478867583.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:03.749Z,1478867583.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:03.781Z,1478867583.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:04.153Z,1478867584.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:04.185Z,1478867584.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:04.566Z,1478867584.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:04.582Z,1478867584.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:04.950Z,1478867584.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:04.981Z,1478867584.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:05.353Z,1478867585.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:05.385Z,1478867585.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:05.749Z,1478867585.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:05.784Z,1478867585.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:06.149Z,1478867586.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:06.186Z,1478867586.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:06.579Z,1478867586.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:06.595Z,1478867586.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:06.972Z,1478867586.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:06.989Z,1478867586.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:07.349Z,1478867587.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:07.381Z,1478867587.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:07.749Z,1478867587.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:07.781Z,1478867587.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:08.149Z,1478867588.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:08.186Z,1478867588.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:08.558Z,1478867588.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:08.583Z,1478867588.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:08.958Z,1478867588.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:08.993Z,1478867588.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:09.349Z,1478867589.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:09.386Z,1478867589.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:09.749Z,1478867589.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:09.785Z,1478867589.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:10.149Z,1478867590.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:10.186Z,1478867590.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:10.562Z,1478867590.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:10.602Z,1478867590.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:10.957Z,1478867590.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:10.992Z,1478867590.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:11.357Z,1478867591.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:11.391Z,1478867591.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:11.758Z,1478867591.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:11.781Z,1478867591.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:12.149Z,1478867592.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:12.169Z,1478867592.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:12.557Z,1478867592.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:12.577Z,1478867592.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:12.956Z,1478867592.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:12.971Z,1478867592.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:13.361Z,1478867593.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:13.381Z,1478867593.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:13.762Z,1478867593.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:13.777Z,1478867593.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:17.318Z,1478867597.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:17.365Z,1478867597.365 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T12:33:17.365Z,1478867597.365 [BPC1] Data Fault, FailCount= 1
2016-11-11T12:33:17.365Z,1478867597.365 [BPC1](ERROR): Data Fault
2016-11-11T12:33:17.385Z,1478867597.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:17.437Z,1478867597.437 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T12:33:17.505Z,1478867597.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:17.539Z,1478867597.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:17.876Z,1478867597.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:17.893Z,1478867597.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:18.269Z,1478867598.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:18.304Z,1478867598.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:18.336Z,1478867598.336 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:33:18.336Z,1478867598.336 [BPC1] No Fault, FailCount= 1
2016-11-11T12:33:18.669Z,1478867598.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:18.753Z,1478867598.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:19.077Z,1478867599.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:19.133Z,1478867599.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:19.483Z,1478867599.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:19.518Z,1478867599.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:19.880Z,1478867599.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:19.915Z,1478867599.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:20.269Z,1478867600.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:20.312Z,1478867600.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:20.678Z,1478867600.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:20.692Z,1478867600.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:21.081Z,1478867601.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:21.101Z,1478867601.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:21.479Z,1478867601.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:21.494Z,1478867601.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:21.878Z,1478867601.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:21.893Z,1478867601.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:22.280Z,1478867602.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:22.296Z,1478867602.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:22.708Z,1478867602.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:22.728Z,1478867602.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:23.069Z,1478867603.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:23.113Z,1478867603.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:23.469Z,1478867603.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:23.509Z,1478867603.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:23.873Z,1478867603.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:23.914Z,1478867603.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:24.273Z,1478867604.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:24.287Z,1478867604.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:24.681Z,1478867604.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:24.715Z,1478867604.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:25.072Z,1478867605.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:25.097Z,1478867605.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:25.478Z,1478867605.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:25.493Z,1478867605.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:25.881Z,1478867605.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:25.896Z,1478867605.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:26.285Z,1478867606.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:26.305Z,1478867606.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:26.669Z,1478867606.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:26.705Z,1478867606.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:27.081Z,1478867607.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:27.119Z,1478867607.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:27.469Z,1478867607.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:27.502Z,1478867607.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:27.869Z,1478867607.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:27.906Z,1478867607.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:28.292Z,1478867608.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:28.312Z,1478867608.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:28.691Z,1478867608.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:28.707Z,1478867608.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:29.069Z,1478867609.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:29.113Z,1478867609.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:29.473Z,1478867609.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:29.493Z,1478867609.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:29.877Z,1478867609.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:29.937Z,1478867609.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:30.277Z,1478867610.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:30.292Z,1478867610.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:30.670Z,1478867610.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:30.725Z,1478867610.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:31.079Z,1478867611.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:31.101Z,1478867611.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:31.478Z,1478867611.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:31.493Z,1478867611.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:31.881Z,1478867611.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:31.935Z,1478867611.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:32.280Z,1478867612.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:32.296Z,1478867612.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:32.692Z,1478867612.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:32.741Z,1478867612.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:33.084Z,1478867613.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:33.137Z,1478867613.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:33.477Z,1478867613.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:33.510Z,1478867613.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:33.869Z,1478867613.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:33.902Z,1478867613.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:34.270Z,1478867614.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:34.302Z,1478867614.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:34.682Z,1478867614.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:34.710Z,1478867614.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:35.074Z,1478867615.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:35.126Z,1478867615.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:35.477Z,1478867615.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:35.512Z,1478867615.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:35.882Z,1478867615.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:35.913Z,1478867615.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:36.274Z,1478867616.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:36.289Z,1478867616.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:36.693Z,1478867616.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:36.709Z,1478867616.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:37.077Z,1478867617.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:37.111Z,1478867617.111 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:37.112Z,1478867617.112 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 135
2016-11-11T12:33:37.112Z,1478867617.112 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:33:37.118Z,1478867617.118 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:37.118Z,1478867617.118 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 135
2016-11-11T12:33:37.118Z,1478867617.118 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:33:37.120Z,1478867617.121 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:37.121Z,1478867617.121 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 135
2016-11-11T12:33:37.121Z,1478867617.121 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:33:37.135Z,1478867617.135 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:33:37.135Z,1478867617.135 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:33:37.136Z,1478867617.136 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:33:37.469Z,1478867617.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:37.525Z,1478867617.525 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:33:37.525Z,1478867617.525 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 135
2016-11-11T12:33:37.526Z,1478867617.526 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:33:37.526Z,1478867617.526 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 135
2016-11-11T12:33:37.527Z,1478867617.527 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:33:37.527Z,1478867617.527 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 135
2016-11-11T12:33:37.882Z,1478867617.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:37.900Z,1478867617.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:33:37.900Z,1478867617.900 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:33:37.901Z,1478867617.901 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:33:37.905Z,1478867617.905 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:33:37.906Z,1478867617.906 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:33:37.906Z,1478867617.906 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:33:37.907Z,1478867617.907 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:33:37.907Z,1478867617.907 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:33:37.908Z,1478867617.908 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:33:38.281Z,1478867618.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:38.303Z,1478867618.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:38.689Z,1478867618.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:38.717Z,1478867618.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:39.069Z,1478867619.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:39.105Z,1478867619.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:39.470Z,1478867619.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:39.505Z,1478867619.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:39.871Z,1478867619.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:39.905Z,1478867619.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:40.271Z,1478867620.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:40.298Z,1478867620.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:40.669Z,1478867620.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:40.701Z,1478867620.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:41.085Z,1478867621.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:41.121Z,1478867621.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:41.481Z,1478867621.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:41.504Z,1478867621.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:41.873Z,1478867621.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:41.897Z,1478867621.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:42.282Z,1478867622.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:42.299Z,1478867622.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:42.672Z,1478867622.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:42.705Z,1478867622.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:43.085Z,1478867623.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:43.102Z,1478867623.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:43.474Z,1478867623.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:43.509Z,1478867623.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:43.873Z,1478867623.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:43.950Z,1478867623.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:44.281Z,1478867624.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:44.301Z,1478867624.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:44.669Z,1478867624.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:44.713Z,1478867624.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:45.069Z,1478867625.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:45.109Z,1478867625.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:45.484Z,1478867625.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:45.534Z,1478867625.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:45.884Z,1478867625.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:45.913Z,1478867625.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:46.274Z,1478867626.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:46.325Z,1478867626.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:46.673Z,1478867626.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:46.693Z,1478867626.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:47.076Z,1478867627.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:47.125Z,1478867627.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:47.472Z,1478867627.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:47.521Z,1478867627.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:47.879Z,1478867627.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:47.895Z,1478867627.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:48.277Z,1478867628.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:48.297Z,1478867628.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:48.669Z,1478867628.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:48.709Z,1478867628.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:49.069Z,1478867629.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:49.089Z,1478867629.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:49.469Z,1478867629.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:49.489Z,1478867629.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:49.869Z,1478867629.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:49.889Z,1478867629.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:50.274Z,1478867630.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:50.305Z,1478867630.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:50.669Z,1478867630.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:50.689Z,1478867630.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:51.069Z,1478867631.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:51.089Z,1478867631.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:51.472Z,1478867631.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:51.497Z,1478867631.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:51.869Z,1478867631.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:51.897Z,1478867631.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:52.274Z,1478867632.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:52.305Z,1478867632.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:52.684Z,1478867632.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:52.705Z,1478867632.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:53.082Z,1478867633.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:53.097Z,1478867633.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:53.469Z,1478867633.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:53.501Z,1478867633.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:53.873Z,1478867633.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:53.905Z,1478867633.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:54.292Z,1478867634.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:54.313Z,1478867634.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:54.680Z,1478867634.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:54.715Z,1478867634.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:55.076Z,1478867635.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:55.092Z,1478867635.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:55.491Z,1478867635.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:55.513Z,1478867635.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:55.884Z,1478867635.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:55.912Z,1478867635.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:56.273Z,1478867636.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:56.305Z,1478867636.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:56.674Z,1478867636.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:56.700Z,1478867636.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:57.069Z,1478867637.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:57.105Z,1478867637.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:57.473Z,1478867637.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:57.501Z,1478867637.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:57.869Z,1478867637.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:57.885Z,1478867637.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:58.269Z,1478867638.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:58.382Z,1478867638.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:58.684Z,1478867638.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:58.700Z,1478867638.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:59.069Z,1478867639.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:59.112Z,1478867639.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:59.469Z,1478867639.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:59.530Z,1478867639.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:33:59.896Z,1478867639.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:33:59.917Z,1478867639.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:00.292Z,1478867640.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:00.382Z,1478867640.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:00.674Z,1478867640.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:00.694Z,1478867640.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:01.080Z,1478867641.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:01.128Z,1478867641.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:01.477Z,1478867641.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:01.529Z,1478867641.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:01.876Z,1478867641.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:01.892Z,1478867641.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:02.280Z,1478867642.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:02.295Z,1478867642.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:02.669Z,1478867642.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:02.706Z,1478867642.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:03.069Z,1478867643.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:03.105Z,1478867643.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:03.477Z,1478867643.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:03.509Z,1478867643.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:03.876Z,1478867643.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:03.908Z,1478867643.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:04.284Z,1478867644.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:04.354Z,1478867644.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:04.688Z,1478867644.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:04.703Z,1478867644.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:05.069Z,1478867645.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:05.104Z,1478867645.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:05.469Z,1478867645.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:05.501Z,1478867645.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:05.869Z,1478867645.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:05.901Z,1478867645.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:06.269Z,1478867646.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:06.306Z,1478867646.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:06.669Z,1478867646.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:06.701Z,1478867646.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:07.077Z,1478867647.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:07.109Z,1478867647.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:07.469Z,1478867647.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:07.513Z,1478867647.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:07.869Z,1478867647.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:07.909Z,1478867647.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:08.269Z,1478867648.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:08.289Z,1478867648.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:08.681Z,1478867648.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:08.696Z,1478867648.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:09.072Z,1478867649.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:09.100Z,1478867649.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:09.477Z,1478867649.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:09.499Z,1478867649.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:09.869Z,1478867649.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:09.901Z,1478867649.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:10.269Z,1478867650.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:10.301Z,1478867650.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:10.673Z,1478867650.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:10.706Z,1478867650.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:11.069Z,1478867651.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:11.105Z,1478867651.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:11.474Z,1478867651.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:11.499Z,1478867651.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:11.877Z,1478867651.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:11.903Z,1478867651.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:12.270Z,1478867652.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:12.381Z,1478867652.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:12.673Z,1478867652.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:12.697Z,1478867652.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:13.084Z,1478867653.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:13.116Z,1478867653.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:13.491Z,1478867653.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:13.513Z,1478867653.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:13.870Z,1478867653.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:13.942Z,1478867653.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:17.324Z,1478867657.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:17.349Z,1478867657.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:17.460Z,1478867657.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:17.498Z,1478867657.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:17.809Z,1478867657.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:17.829Z,1478867657.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:18.206Z,1478867658.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:18.260Z,1478867658.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:18.597Z,1478867658.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:18.629Z,1478867658.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:18.997Z,1478867658.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:19.046Z,1478867659.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:19.397Z,1478867659.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:19.453Z,1478867659.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:19.797Z,1478867659.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:19.822Z,1478867659.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:20.197Z,1478867660.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:20.228Z,1478867660.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:20.606Z,1478867660.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:20.633Z,1478867660.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:20.997Z,1478867660.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:21.030Z,1478867661.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:21.405Z,1478867661.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:21.445Z,1478867661.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:21.804Z,1478867661.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:21.819Z,1478867661.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:22.198Z,1478867662.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:22.222Z,1478867662.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:22.607Z,1478867662.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:22.623Z,1478867662.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:23.005Z,1478867663.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:23.025Z,1478867663.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:23.404Z,1478867663.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:23.420Z,1478867663.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:23.812Z,1478867663.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:23.827Z,1478867663.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:24.210Z,1478867664.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:24.226Z,1478867664.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:24.597Z,1478867664.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:24.623Z,1478867664.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:24.997Z,1478867664.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:25.029Z,1478867665.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:25.398Z,1478867665.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:25.433Z,1478867665.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:25.819Z,1478867665.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:25.835Z,1478867665.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:26.216Z,1478867666.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:26.231Z,1478867666.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:26.598Z,1478867666.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:26.621Z,1478867666.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:27.008Z,1478867667.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:27.023Z,1478867667.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:27.400Z,1478867667.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:27.429Z,1478867667.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:27.798Z,1478867667.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:27.829Z,1478867667.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:28.201Z,1478867668.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:28.233Z,1478867668.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:28.605Z,1478867668.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:28.633Z,1478867668.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:29.001Z,1478867669.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:29.041Z,1478867669.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:29.401Z,1478867669.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:29.417Z,1478867669.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:29.800Z,1478867669.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:29.857Z,1478867669.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:30.212Z,1478867670.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:30.237Z,1478867670.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:30.612Z,1478867670.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:30.640Z,1478867670.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:30.997Z,1478867670.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:31.067Z,1478867671.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:31.397Z,1478867671.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:31.430Z,1478867671.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:31.797Z,1478867671.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:31.829Z,1478867671.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:32.197Z,1478867672.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:32.249Z,1478867672.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:32.609Z,1478867672.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:32.629Z,1478867672.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:33.004Z,1478867673.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:33.056Z,1478867673.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:33.409Z,1478867673.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:33.456Z,1478867673.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:33.809Z,1478867673.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:33.824Z,1478867673.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:34.200Z,1478867674.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:34.228Z,1478867674.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:34.604Z,1478867674.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:34.625Z,1478867674.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:35.010Z,1478867675.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:35.025Z,1478867675.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:35.397Z,1478867675.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:35.429Z,1478867675.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:35.797Z,1478867675.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:35.833Z,1478867675.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:36.198Z,1478867676.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:36.229Z,1478867676.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:36.597Z,1478867676.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:36.633Z,1478867676.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:37.013Z,1478867677.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:37.036Z,1478867677.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:37.401Z,1478867677.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:37.438Z,1478867677.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:37.801Z,1478867677.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:37.816Z,1478867677.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:38.205Z,1478867678.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:38.225Z,1478867678.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:38.616Z,1478867678.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:38.655Z,1478867678.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:39.010Z,1478867679.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:39.037Z,1478867679.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:39.412Z,1478867679.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:39.433Z,1478867679.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:39.805Z,1478867679.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:39.828Z,1478867679.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:40.213Z,1478867680.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:40.233Z,1478867680.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:40.609Z,1478867680.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:40.650Z,1478867680.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:41.005Z,1478867681.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:41.026Z,1478867681.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:41.405Z,1478867681.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:41.425Z,1478867681.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:41.803Z,1478867681.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:41.818Z,1478867681.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:42.200Z,1478867682.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:42.228Z,1478867682.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:42.597Z,1478867682.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:42.631Z,1478867682.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:42.997Z,1478867682.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:43.022Z,1478867683.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:43.405Z,1478867683.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:43.429Z,1478867683.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:43.805Z,1478867683.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:43.827Z,1478867683.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:44.212Z,1478867684.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:44.294Z,1478867684.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:44.606Z,1478867684.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:44.633Z,1478867684.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:44.000Z,1478867685.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:45.015Z,1478867685.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:45.397Z,1478867685.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:45.469Z,1478867685.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:45.800Z,1478867685.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:45.833Z,1478867685.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:46.201Z,1478867686.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:46.223Z,1478867686.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:46.597Z,1478867686.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:46.659Z,1478867686.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:47.005Z,1478867687.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:47.028Z,1478867687.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:47.419Z,1478867687.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:47.473Z,1478867687.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:47.815Z,1478867687.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:47.871Z,1478867687.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:48.197Z,1478867688.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:48.233Z,1478867688.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:48.605Z,1478867688.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:48.631Z,1478867688.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:48.997Z,1478867688.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:49.032Z,1478867689.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:49.402Z,1478867689.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:49.438Z,1478867689.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:49.798Z,1478867689.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:49.834Z,1478867689.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:50.201Z,1478867690.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:50.234Z,1478867690.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:50.602Z,1478867690.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:50.639Z,1478867690.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:50.998Z,1478867690.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:51.026Z,1478867691.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:51.405Z,1478867691.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:51.431Z,1478867691.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:51.816Z,1478867691.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:51.837Z,1478867691.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:52.219Z,1478867692.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:52.234Z,1478867692.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:52.597Z,1478867692.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:52.629Z,1478867692.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:52.997Z,1478867692.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:53.029Z,1478867693.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:53.397Z,1478867693.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:53.436Z,1478867693.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:53.797Z,1478867693.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:53.835Z,1478867693.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:54.197Z,1478867694.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:54.221Z,1478867694.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:54.600Z,1478867694.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:54.634Z,1478867694.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:54.997Z,1478867694.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:55.030Z,1478867695.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:55.397Z,1478867695.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:55.434Z,1478867695.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:55.797Z,1478867695.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:55.829Z,1478867695.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:56.219Z,1478867696.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:56.294Z,1478867696.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:56.617Z,1478867696.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:56.650Z,1478867696.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:56.997Z,1478867696.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:57.033Z,1478867697.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:57.405Z,1478867697.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:57.430Z,1478867697.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:57.797Z,1478867697.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:57.834Z,1478867697.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:58.197Z,1478867698.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:58.289Z,1478867698.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:58.602Z,1478867698.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:58.618Z,1478867698.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:59.005Z,1478867699.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:59.020Z,1478867699.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:59.405Z,1478867699.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:59.420Z,1478867699.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:34:59.801Z,1478867699.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:34:59.908Z,1478867699.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:00.248Z,1478867700.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:00.294Z,1478867700.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:00.620Z,1478867700.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:00.652Z,1478867700.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:01.024Z,1478867701.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:01.043Z,1478867701.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:01.412Z,1478867701.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:01.437Z,1478867701.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:01.797Z,1478867701.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:01.837Z,1478867701.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:02.197Z,1478867702.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:02.212Z,1478867702.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:02.598Z,1478867702.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:02.625Z,1478867702.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:03.000Z,1478867703.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:03.013Z,1478867703.013 [BPC1](ERROR): Failed to receive battery data
2016-11-11T12:35:03.013Z,1478867703.013 [BPC1] Communications Fault, FailCount= 1
2016-11-11T12:35:03.013Z,1478867703.013 [BPC1](ERROR): Communications Fault
2016-11-11T12:35:03.030Z,1478867703.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:03.076Z,1478867703.076 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T12:35:03.404Z,1478867703.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:03.429Z,1478867703.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:03.797Z,1478867703.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:03.829Z,1478867703.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:04.197Z,1478867704.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:04.224Z,1478867704.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:04.264Z,1478867704.263 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:35:04.264Z,1478867704.264 [BPC1] No Fault, FailCount= 1
2016-11-11T12:35:04.601Z,1478867704.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:04.733Z,1478867704.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:05.020Z,1478867705.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:05.075Z,1478867705.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:05.415Z,1478867705.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:05.431Z,1478867705.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:05.819Z,1478867705.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:05.838Z,1478867705.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:06.224Z,1478867706.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:06.239Z,1478867706.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:06.597Z,1478867706.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:06.633Z,1478867706.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:07.009Z,1478867707.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:07.044Z,1478867707.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:07.401Z,1478867707.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:07.423Z,1478867707.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:07.809Z,1478867707.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:07.824Z,1478867707.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:08.217Z,1478867708.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:08.299Z,1478867708.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:08.605Z,1478867708.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:08.619Z,1478867708.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:09.003Z,1478867709.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:09.021Z,1478867709.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:09.407Z,1478867709.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:09.423Z,1478867709.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:09.815Z,1478867709.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:09.839Z,1478867709.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:10.225Z,1478867710.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:10.294Z,1478867710.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:10.608Z,1478867710.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:10.641Z,1478867710.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:10.997Z,1478867710.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:11.041Z,1478867711.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:11.397Z,1478867711.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:11.424Z,1478867711.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:11.801Z,1478867711.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:11.839Z,1478867711.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:12.225Z,1478867712.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:12.296Z,1478867712.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:12.609Z,1478867712.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:12.652Z,1478867712.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:13.005Z,1478867713.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:13.025Z,1478867713.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:13.412Z,1478867713.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:13.451Z,1478867713.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:13.460Z,1478867713.460 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T12:30:13.4Z
2016-11-11T12:35:13.460Z,1478867713.460 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T12:35:13.460Z,1478867713.460 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T12:35:13.808Z,1478867713.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:13.827Z,1478867713.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:14.762Z,1478867714.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:14.777Z,1478867714.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:17.963Z,1478867717.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:18.037Z,1478867718.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:18.101Z,1478867718.101 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0180.lzma
2016-11-11T12:35:18.141Z,1478867718.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:18.177Z,1478867718.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:18.532Z,1478867718.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:18.548Z,1478867718.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:18.893Z,1478867718.893 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0180.lzma.bak
2016-11-11T12:35:18.893Z,1478867718.893 [DataOverHttps](INFO): SBD MOMSN=4555407
2016-11-11T12:35:18.938Z,1478867718.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:18.982Z,1478867718.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:20.219Z,1478867720.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:20.234Z,1478867720.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:20.330Z,1478867720.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:20.389Z,1478867720.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:23.999Z,1478867723.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:24.038Z,1478867724.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:24.152Z,1478867724.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:24.239Z,1478867724.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:24.508Z,1478867724.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:24.537Z,1478867724.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:24.916Z,1478867724.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:24.938Z,1478867724.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:25.289Z,1478867725.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:25.325Z,1478867725.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:25.690Z,1478867725.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:25.725Z,1478867725.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:29.296Z,1478867729.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:29.321Z,1478867729.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:29.350Z,1478867729.350 [DataOverHttps](INFO): Sending 164 bytes from file Logs/20161111T044527/Express0181.lzma
2016-11-11T12:35:29.438Z,1478867729.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:29.466Z,1478867729.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:29.783Z,1478867729.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:29.799Z,1478867729.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:30.149Z,1478867730.149 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0181.lzma.bak
2016-11-11T12:35:30.149Z,1478867730.149 [DataOverHttps](INFO): SBD MOMSN=4555409
2016-11-11T12:35:30.189Z,1478867730.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:30.224Z,1478867730.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:31.481Z,1478867731.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:31.506Z,1478867731.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:31.516Z,1478867731.516 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T12:35:31.516Z,1478867731.516 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T12:35:31.516Z,1478867731.516 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T12:35:31.606Z,1478867731.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:31.645Z,1478867731.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:35.124Z,1478867735.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:35.140Z,1478867735.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:35.234Z,1478867735.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:35.273Z,1478867735.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:35.629Z,1478867735.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:35.649Z,1478867735.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:36.030Z,1478867736.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:36.109Z,1478867736.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:36.425Z,1478867736.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:36.445Z,1478867736.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:36.825Z,1478867736.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:36.879Z,1478867736.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:37.229Z,1478867737.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:37.244Z,1478867737.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:37.624Z,1478867737.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:37.673Z,1478867737.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:38.036Z,1478867738.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:38.081Z,1478867738.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:38.438Z,1478867738.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:38.461Z,1478867738.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:38.821Z,1478867738.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:38.853Z,1478867738.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:39.247Z,1478867739.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:39.262Z,1478867739.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:39.647Z,1478867739.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:39.669Z,1478867739.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:40.022Z,1478867740.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:40.061Z,1478867740.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:40.445Z,1478867740.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:40.465Z,1478867740.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:40.821Z,1478867740.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:40.853Z,1478867740.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:41.221Z,1478867741.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:41.253Z,1478867741.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:41.625Z,1478867741.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:41.657Z,1478867741.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:42.021Z,1478867742.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:42.056Z,1478867742.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:42.421Z,1478867742.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:42.447Z,1478867742.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:42.825Z,1478867742.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:42.860Z,1478867742.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:43.221Z,1478867743.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:43.253Z,1478867743.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:43.622Z,1478867743.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:43.659Z,1478867743.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:44.020Z,1478867744.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:44.053Z,1478867744.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:44.421Z,1478867744.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:44.458Z,1478867744.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:44.821Z,1478867744.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:44.853Z,1478867744.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:45.221Z,1478867745.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:45.265Z,1478867745.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:45.472Z,1478867745.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:45.622Z,1478867745.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:45.645Z,1478867745.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:46.022Z,1478867746.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:46.049Z,1478867746.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:46.268Z,1478867746.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:46.421Z,1478867746.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:46.461Z,1478867746.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:46.836Z,1478867746.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:46.864Z,1478867746.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:47.232Z,1478867747.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:47.264Z,1478867747.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:47.629Z,1478867747.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:47.649Z,1478867747.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:48.029Z,1478867748.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:48.049Z,1478867748.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:48.428Z,1478867748.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:48.446Z,1478867748.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:48.817Z,1478867748.817 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T12:35:48.833Z,1478867748.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:48.853Z,1478867748.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:49.229Z,1478867749.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:49.252Z,1478867749.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:49.624Z,1478867749.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:49.661Z,1478867749.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:50.021Z,1478867750.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:50.085Z,1478867750.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:50.428Z,1478867750.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:50.462Z,1478867750.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:50.829Z,1478867750.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:50.845Z,1478867750.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:51.236Z,1478867751.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:51.252Z,1478867751.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:51.626Z,1478867751.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:51.688Z,1478867751.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:52.022Z,1478867752.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:52.045Z,1478867752.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:52.430Z,1478867752.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:52.481Z,1478867752.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:52.825Z,1478867752.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:52.874Z,1478867752.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:53.228Z,1478867753.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:53.252Z,1478867753.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:53.621Z,1478867753.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:53.641Z,1478867753.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:54.027Z,1478867754.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:54.043Z,1478867754.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:54.404Z,1478867754.404 [NAL9602](INFO): Powering down
2016-11-11T12:35:54.427Z,1478867754.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:54.469Z,1478867754.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:54.828Z,1478867754.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:54.844Z,1478867754.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:55.229Z,1478867755.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:55.250Z,1478867755.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:55.629Z,1478867755.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:55.645Z,1478867755.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:56.021Z,1478867756.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:56.056Z,1478867756.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:56.421Z,1478867756.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:56.478Z,1478867756.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:56.826Z,1478867756.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:56.842Z,1478867756.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:57.229Z,1478867757.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:57.244Z,1478867757.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:57.621Z,1478867757.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:57.641Z,1478867757.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:57.660Z,1478867757.661 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T12:35:58.018Z,1478867758.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:58.080Z,1478867758.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:58.421Z,1478867758.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:58.436Z,1478867758.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:58.825Z,1478867758.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:58.840Z,1478867758.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:59.221Z,1478867759.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:59.236Z,1478867759.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:35:59.625Z,1478867759.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:35:59.640Z,1478867759.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:00.022Z,1478867760.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:00.048Z,1478867760.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:00.425Z,1478867760.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:00.441Z,1478867760.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:00.822Z,1478867760.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:00.859Z,1478867760.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:01.225Z,1478867761.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:01.240Z,1478867761.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:01.622Z,1478867761.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:01.645Z,1478867761.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:02.021Z,1478867762.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:02.041Z,1478867762.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:02.425Z,1478867762.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:02.445Z,1478867762.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:02.821Z,1478867762.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:02.836Z,1478867762.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:03.225Z,1478867763.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:03.240Z,1478867763.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:03.621Z,1478867763.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:03.641Z,1478867763.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:04.025Z,1478867764.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:04.040Z,1478867764.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:04.421Z,1478867764.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:04.441Z,1478867764.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:04.825Z,1478867764.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:04.885Z,1478867764.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:05.238Z,1478867765.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:05.254Z,1478867765.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:05.625Z,1478867765.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:05.666Z,1478867765.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:06.025Z,1478867766.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:06.040Z,1478867766.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:06.425Z,1478867766.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:06.473Z,1478867766.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:06.825Z,1478867766.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:06.866Z,1478867766.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:07.221Z,1478867767.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:07.241Z,1478867767.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:07.625Z,1478867767.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:07.641Z,1478867767.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:08.021Z,1478867768.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:08.041Z,1478867768.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:08.425Z,1478867768.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:08.440Z,1478867768.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:08.504Z,1478867768.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:08.821Z,1478867768.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:08.837Z,1478867768.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:09.225Z,1478867769.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:09.240Z,1478867769.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:09.300Z,1478867769.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:09.625Z,1478867769.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:09.690Z,1478867769.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:10.018Z,1478867770.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:10.033Z,1478867770.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:10.096Z,1478867770.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:10.425Z,1478867770.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:10.440Z,1478867770.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:10.821Z,1478867770.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:10.841Z,1478867770.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:10.892Z,1478867770.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:11.225Z,1478867771.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:11.241Z,1478867771.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:11.621Z,1478867771.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:11.637Z,1478867771.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:11.688Z,1478867771.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:12.025Z,1478867772.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:12.040Z,1478867772.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:12.418Z,1478867772.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:12.433Z,1478867772.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:12.484Z,1478867772.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:12.830Z,1478867772.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:12.857Z,1478867772.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:13.229Z,1478867773.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:13.249Z,1478867773.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:13.625Z,1478867773.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:13.641Z,1478867773.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:14.026Z,1478867774.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:14.041Z,1478867774.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:14.425Z,1478867774.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:14.445Z,1478867774.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:14.825Z,1478867774.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:14.900Z,1478867774.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:15.225Z,1478867775.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:15.240Z,1478867775.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:15.625Z,1478867775.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:15.645Z,1478867775.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:16.022Z,1478867776.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:16.041Z,1478867776.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:16.421Z,1478867776.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:16.447Z,1478867776.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:16.825Z,1478867776.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:16.845Z,1478867776.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:17.225Z,1478867777.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:17.245Z,1478867777.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:17.621Z,1478867777.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:17.670Z,1478867777.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:18.021Z,1478867778.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:18.049Z,1478867778.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:18.056Z,1478867778.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:18.421Z,1478867778.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:18.441Z,1478867778.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:18.464Z,1478867778.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:18.822Z,1478867778.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:18.877Z,1478867778.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:19.044Z,1478867779.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:19.223Z,1478867779.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:19.257Z,1478867779.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:19.452Z,1478867779.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:19.621Z,1478867779.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:19.649Z,1478867779.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:19.860Z,1478867779.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:20.021Z,1478867780.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:20.043Z,1478867780.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:20.268Z,1478867780.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:20.422Z,1478867780.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:20.449Z,1478867780.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:20.676Z,1478867780.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:20.822Z,1478867780.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:20.849Z,1478867780.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:21.084Z,1478867781.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:21.221Z,1478867781.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:21.249Z,1478867781.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:21.492Z,1478867781.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:21.622Z,1478867781.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:21.649Z,1478867781.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:21.900Z,1478867781.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:22.021Z,1478867782.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:22.030Z,1478867782.030 [BPC1](ERROR): Failed to receive battery data
2016-11-11T12:36:22.030Z,1478867782.030 [BPC1] Communications Fault, FailCount= 1
2016-11-11T12:36:22.030Z,1478867782.030 [BPC1](ERROR): Communications Fault
2016-11-11T12:36:22.038Z,1478867782.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:22.120Z,1478867782.120 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T12:36:22.308Z,1478867782.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:22.421Z,1478867782.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:22.449Z,1478867782.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:22.716Z,1478867782.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:22.822Z,1478867782.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:22.849Z,1478867782.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:23.124Z,1478867783.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:23.221Z,1478867783.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:23.249Z,1478867783.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:23.290Z,1478867783.290 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:36:23.290Z,1478867783.290 [BPC1] No Fault, FailCount= 1
2016-11-11T12:36:23.533Z,1478867783.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:23.621Z,1478867783.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:23.700Z,1478867783.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:24.023Z,1478867784.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:24.097Z,1478867784.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:24.328Z,1478867784.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:24.421Z,1478867784.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:24.441Z,1478867784.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:24.736Z,1478867784.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:24.825Z,1478867784.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:24.845Z,1478867784.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:25.229Z,1478867785.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:25.249Z,1478867785.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:25.532Z,1478867785.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:25.624Z,1478867785.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:25.653Z,1478867785.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:26.028Z,1478867786.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:26.049Z,1478867786.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:26.328Z,1478867786.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:26.435Z,1478867786.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:26.451Z,1478867786.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:26.736Z,1478867786.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:26.832Z,1478867786.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:26.848Z,1478867786.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:27.221Z,1478867787.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:27.270Z,1478867787.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:27.532Z,1478867787.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:27.621Z,1478867787.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:27.650Z,1478867787.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:28.025Z,1478867788.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:28.051Z,1478867788.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:28.328Z,1478867788.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:28.429Z,1478867788.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:28.455Z,1478867788.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:28.833Z,1478867788.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:28.853Z,1478867788.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:28.960Z,1478867788.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:29.229Z,1478867789.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:29.253Z,1478867789.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:29.630Z,1478867789.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:29.659Z,1478867789.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:29.756Z,1478867789.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:30.022Z,1478867790.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:30.054Z,1478867790.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:30.422Z,1478867790.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:30.457Z,1478867790.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:30.553Z,1478867790.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:30.822Z,1478867790.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:30.853Z,1478867790.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:30.968Z,1478867790.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:31.224Z,1478867791.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:31.257Z,1478867791.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:31.622Z,1478867791.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:31.658Z,1478867791.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:31.764Z,1478867791.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:32.021Z,1478867792.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:32.085Z,1478867792.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:32.516Z,1478867792.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:33.312Z,1478867793.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:34.108Z,1478867794.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:34.516Z,1478867794.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:35.312Z,1478867795.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:35.580Z,1478867795.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:35.596Z,1478867795.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:35.704Z,1478867795.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:35.732Z,1478867795.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:36.105Z,1478867796.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:36.108Z,1478867796.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:36.162Z,1478867796.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:36.488Z,1478867796.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:36.506Z,1478867796.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:36.540Z,1478867796.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:36.889Z,1478867796.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:36.905Z,1478867796.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:37.277Z,1478867797.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:37.317Z,1478867797.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:37.336Z,1478867797.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:37.673Z,1478867797.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:37.692Z,1478867797.692 [PNI_TCM](ERROR): CRC does not match. Expected:0x8147 got:0x18266
2016-11-11T12:36:37.710Z,1478867797.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:38.086Z,1478867798.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:38.132Z,1478867798.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:38.177Z,1478867798.178 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:38.178Z,1478867798.178 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 136
2016-11-11T12:36:38.178Z,1478867798.178 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:36:38.197Z,1478867798.197 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:38.197Z,1478867798.197 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 136
2016-11-11T12:36:38.197Z,1478867798.197 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:36:38.203Z,1478867798.203 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:38.203Z,1478867798.203 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 136
2016-11-11T12:36:38.204Z,1478867798.204 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:36:38.226Z,1478867798.226 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:36:38.226Z,1478867798.226 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:36:38.227Z,1478867798.227 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:36:38.475Z,1478867798.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:38.540Z,1478867798.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:38.543Z,1478867798.543 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:36:38.543Z,1478867798.543 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 136
2016-11-11T12:36:38.544Z,1478867798.544 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:36:38.544Z,1478867798.544 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 136
2016-11-11T12:36:38.545Z,1478867798.545 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:36:38.545Z,1478867798.545 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 136
2016-11-11T12:36:38.873Z,1478867798.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:38.911Z,1478867798.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:36:38.912Z,1478867798.912 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:36:38.912Z,1478867798.912 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:36:38.916Z,1478867798.916 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:36:38.917Z,1478867798.917 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:36:38.917Z,1478867798.917 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:36:38.918Z,1478867798.918 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:36:38.918Z,1478867798.918 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:36:38.918Z,1478867798.918 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:36:39.282Z,1478867799.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:39.315Z,1478867799.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:39.336Z,1478867799.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:39.679Z,1478867799.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:39.726Z,1478867799.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:40.075Z,1478867800.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:40.090Z,1478867800.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:40.132Z,1478867800.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:40.473Z,1478867800.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:40.529Z,1478867800.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:40.576Z,1478867800.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:40.874Z,1478867800.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:40.919Z,1478867800.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:41.275Z,1478867801.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:41.312Z,1478867801.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:41.372Z,1478867801.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:41.675Z,1478867801.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:41.690Z,1478867801.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:42.073Z,1478867802.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:42.116Z,1478867802.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:42.168Z,1478867802.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:42.483Z,1478867802.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:42.533Z,1478867802.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:42.880Z,1478867802.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:42.901Z,1478867802.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:42.952Z,1478867802.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:43.281Z,1478867803.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:43.301Z,1478867803.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:43.681Z,1478867803.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:43.698Z,1478867803.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:43.749Z,1478867803.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:44.083Z,1478867804.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:44.099Z,1478867804.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:44.475Z,1478867804.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:44.544Z,1478867804.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:44.572Z,1478867804.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:44.881Z,1478867804.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:44.896Z,1478867804.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:44.956Z,1478867804.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:45.280Z,1478867805.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:45.298Z,1478867805.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:45.684Z,1478867805.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:45.709Z,1478867805.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:45.752Z,1478867805.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:46.092Z,1478867806.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:46.149Z,1478867806.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:46.473Z,1478867806.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:46.510Z,1478867806.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:46.548Z,1478867806.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:46.873Z,1478867806.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:46.891Z,1478867806.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:46.956Z,1478867806.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:47.275Z,1478867807.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:47.305Z,1478867807.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:47.675Z,1478867807.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:47.710Z,1478867807.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:47.752Z,1478867807.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:48.081Z,1478867808.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:48.117Z,1478867808.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:48.479Z,1478867808.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:48.495Z,1478867808.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:48.516Z,1478867808.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:48.879Z,1478867808.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:48.895Z,1478867808.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:49.284Z,1478867809.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:49.299Z,1478867809.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:49.312Z,1478867809.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:49.679Z,1478867809.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:49.701Z,1478867809.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:50.102Z,1478867810.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:50.108Z,1478867810.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:50.157Z,1478867810.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:50.490Z,1478867810.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:50.506Z,1478867810.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:50.516Z,1478867810.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:50.880Z,1478867810.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:50.901Z,1478867810.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:51.280Z,1478867811.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:51.296Z,1478867811.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:51.312Z,1478867811.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:51.675Z,1478867811.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:51.733Z,1478867811.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:52.085Z,1478867812.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:52.108Z,1478867812.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:52.180Z,1478867812.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:52.473Z,1478867812.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:52.509Z,1478867812.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:52.516Z,1478867812.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:52.873Z,1478867812.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:52.933Z,1478867812.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:53.275Z,1478867813.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:53.312Z,1478867813.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:53.314Z,1478867813.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:53.675Z,1478867813.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:53.722Z,1478867813.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:54.073Z,1478867814.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:54.108Z,1478867814.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:54.166Z,1478867814.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:54.475Z,1478867814.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:54.533Z,1478867814.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:54.564Z,1478867814.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:54.883Z,1478867814.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:54.937Z,1478867814.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:55.281Z,1478867815.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:55.296Z,1478867815.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:55.360Z,1478867815.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:55.681Z,1478867815.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:55.701Z,1478867815.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:56.081Z,1478867816.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:56.097Z,1478867816.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:56.156Z,1478867816.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:56.504Z,1478867816.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:56.582Z,1478867816.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:56.883Z,1478867816.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:56.898Z,1478867816.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:56.924Z,1478867816.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:57.278Z,1478867817.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:57.312Z,1478867817.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:57.680Z,1478867817.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:57.695Z,1478867817.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:57.740Z,1478867817.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:58.085Z,1478867818.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:58.101Z,1478867818.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:58.484Z,1478867818.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:58.536Z,1478867818.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:58.547Z,1478867818.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:58.873Z,1478867818.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:58.916Z,1478867818.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:58.948Z,1478867818.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:59.272Z,1478867819.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:59.313Z,1478867819.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:59.675Z,1478867819.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:36:59.691Z,1478867819.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:36:59.744Z,1478867819.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:00.106Z,1478867820.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:00.130Z,1478867820.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:00.444Z,1478867820.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:00.478Z,1478867820.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:00.501Z,1478867820.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:00.876Z,1478867820.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:00.892Z,1478867820.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:01.240Z,1478867821.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:01.276Z,1478867821.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:01.305Z,1478867821.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:01.681Z,1478867821.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:01.701Z,1478867821.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:02.037Z,1478867822.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:02.094Z,1478867822.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:02.134Z,1478867822.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:02.462Z,1478867822.462 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:02.474Z,1478867822.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:02.511Z,1478867822.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:02.874Z,1478867822.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:02.909Z,1478867822.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:03.256Z,1478867823.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:03.277Z,1478867823.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:03.313Z,1478867823.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:03.673Z,1478867823.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:03.716Z,1478867823.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:04.052Z,1478867824.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:04.086Z,1478867824.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:04.122Z,1478867824.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:04.465Z,1478867824.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:04.478Z,1478867824.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:04.493Z,1478867824.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:04.880Z,1478867824.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:04.896Z,1478867824.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:05.260Z,1478867825.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:05.281Z,1478867825.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:05.301Z,1478867825.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:05.680Z,1478867825.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:05.733Z,1478867825.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:06.056Z,1478867826.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:06.091Z,1478867826.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:06.128Z,1478867826.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:06.470Z,1478867826.470 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:06.492Z,1478867826.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:06.508Z,1478867826.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:06.880Z,1478867826.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:06.907Z,1478867826.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:07.266Z,1478867827.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:07.282Z,1478867827.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:07.345Z,1478867827.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:07.680Z,1478867827.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:07.703Z,1478867827.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:08.062Z,1478867828.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:08.074Z,1478867828.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:08.180Z,1478867828.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:08.477Z,1478867828.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:08.497Z,1478867828.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:08.548Z,1478867828.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:08.878Z,1478867828.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:08.925Z,1478867828.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:09.279Z,1478867829.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:09.324Z,1478867829.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:09.344Z,1478867829.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:09.677Z,1478867829.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:09.697Z,1478867829.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:10.081Z,1478867830.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:10.101Z,1478867830.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:10.140Z,1478867830.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:10.535Z,1478867830.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:10.576Z,1478867830.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:10.882Z,1478867830.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:10.904Z,1478867830.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:10.906Z,1478867830.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:11.274Z,1478867831.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:11.301Z,1478867831.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:11.673Z,1478867831.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:11.700Z,1478867831.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:11.707Z,1478867831.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:12.073Z,1478867832.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:12.105Z,1478867832.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:12.492Z,1478867832.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:12.496Z,1478867832.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:12.522Z,1478867832.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:12.873Z,1478867832.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:12.889Z,1478867832.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:12.940Z,1478867832.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:13.273Z,1478867833.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:13.293Z,1478867833.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:13.680Z,1478867833.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:13.695Z,1478867833.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:13.736Z,1478867833.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:14.089Z,1478867834.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:14.111Z,1478867834.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:14.424Z,1478867834.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:14.479Z,1478867834.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:14.503Z,1478867834.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:14.881Z,1478867834.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:14.901Z,1478867834.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:15.220Z,1478867835.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:15.273Z,1478867835.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:15.305Z,1478867835.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:15.673Z,1478867835.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:15.711Z,1478867835.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:16.022Z,1478867836.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:16.080Z,1478867836.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:16.117Z,1478867836.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:16.468Z,1478867836.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:16.478Z,1478867836.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:16.493Z,1478867836.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:16.884Z,1478867836.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:16.915Z,1478867836.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:17.264Z,1478867837.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:17.282Z,1478867837.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:17.297Z,1478867837.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:17.677Z,1478867837.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:17.705Z,1478867837.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:18.061Z,1478867838.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:18.095Z,1478867838.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:18.111Z,1478867838.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:18.484Z,1478867838.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:18.485Z,1478867838.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:18.501Z,1478867838.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:18.885Z,1478867838.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:18.901Z,1478867838.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:19.280Z,1478867839.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:19.289Z,1478867839.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:19.315Z,1478867839.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:19.677Z,1478867839.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:19.729Z,1478867839.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:20.073Z,1478867840.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:20.076Z,1478867840.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:20.120Z,1478867840.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:20.473Z,1478867840.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:20.484Z,1478867840.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:20.490Z,1478867840.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:20.873Z,1478867840.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:20.916Z,1478867840.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:21.273Z,1478867841.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:21.280Z,1478867841.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:21.321Z,1478867841.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:21.678Z,1478867841.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:21.709Z,1478867841.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:22.077Z,1478867842.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:22.081Z,1478867842.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:22.186Z,1478867842.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:22.479Z,1478867842.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:22.495Z,1478867842.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:22.528Z,1478867842.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:22.879Z,1478867842.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:22.932Z,1478867842.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:23.280Z,1478867843.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:23.324Z,1478867843.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:23.336Z,1478867843.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:23.680Z,1478867843.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:23.696Z,1478867843.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:24.080Z,1478867844.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:24.095Z,1478867844.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:24.124Z,1478867844.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:24.488Z,1478867844.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:24.545Z,1478867844.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:24.873Z,1478867844.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:24.905Z,1478867844.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:24.928Z,1478867844.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:25.273Z,1478867845.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:25.309Z,1478867845.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:25.673Z,1478867845.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:25.709Z,1478867845.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:25.724Z,1478867845.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:26.077Z,1478867846.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:26.109Z,1478867846.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:26.511Z,1478867846.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:26.570Z,1478867846.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:26.878Z,1478867846.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:26.893Z,1478867846.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:27.275Z,1478867847.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:27.297Z,1478867847.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:27.680Z,1478867847.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:27.695Z,1478867847.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:28.076Z,1478867848.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:28.091Z,1478867848.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:28.481Z,1478867848.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:28.496Z,1478867848.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:28.880Z,1478867848.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:28.895Z,1478867848.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:29.282Z,1478867849.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:29.309Z,1478867849.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:29.683Z,1478867849.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:29.711Z,1478867849.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:30.075Z,1478867850.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:30.118Z,1478867850.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:30.475Z,1478867850.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:30.553Z,1478867850.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:30.875Z,1478867850.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:30.923Z,1478867850.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:31.287Z,1478867851.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:31.338Z,1478867851.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:31.682Z,1478867851.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:31.727Z,1478867851.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:32.083Z,1478867852.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:32.103Z,1478867852.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:38.959Z,1478867858.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:39.003Z,1478867859.003 [BPC1](ERROR): Failed to receive battery data
2016-11-11T12:37:39.003Z,1478867859.003 [BPC1] Communications Fault, FailCount= 1
2016-11-11T12:37:39.003Z,1478867859.003 [BPC1](ERROR): Communications Fault
2016-11-11T12:37:39.022Z,1478867859.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:39.058Z,1478867859.058 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T12:37:39.140Z,1478867859.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:39.178Z,1478867859.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:39.508Z,1478867859.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:39.529Z,1478867859.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:39.893Z,1478867859.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:39.927Z,1478867859.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:39.998Z,1478867859.998 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:37:39.998Z,1478867859.998 [BPC1] No Fault, FailCount= 1
2016-11-11T12:37:40.293Z,1478867860.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:40.401Z,1478867860.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:40.721Z,1478867860.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:40.792Z,1478867860.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:41.097Z,1478867861.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:41.113Z,1478867861.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:41.496Z,1478867861.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:41.549Z,1478867861.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:41.915Z,1478867861.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:41.931Z,1478867861.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:42.293Z,1478867862.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:42.321Z,1478867862.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:42.693Z,1478867862.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:42.740Z,1478867862.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:43.114Z,1478867863.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:43.129Z,1478867863.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:43.493Z,1478867863.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:43.517Z,1478867863.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:43.895Z,1478867863.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:43.989Z,1478867863.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:44.302Z,1478867864.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:44.318Z,1478867864.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:44.695Z,1478867864.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:44.733Z,1478867864.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:45.095Z,1478867865.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:45.130Z,1478867865.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:45.495Z,1478867865.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:45.563Z,1478867865.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:45.899Z,1478867865.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:45.999Z,1478867865.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:46.301Z,1478867866.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:46.322Z,1478867866.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:46.695Z,1478867866.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:46.738Z,1478867866.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:47.094Z,1478867867.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:47.151Z,1478867867.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:47.495Z,1478867867.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:47.547Z,1478867867.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:47.899Z,1478867867.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:47.962Z,1478867867.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:48.295Z,1478867868.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:48.344Z,1478867868.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:48.698Z,1478867868.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:48.718Z,1478867868.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:49.102Z,1478867869.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:49.121Z,1478867869.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:49.495Z,1478867869.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:49.528Z,1478867869.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:49.895Z,1478867869.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:49.927Z,1478867869.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:50.302Z,1478867870.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:50.322Z,1478867870.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:50.702Z,1478867870.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:50.733Z,1478867870.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:51.095Z,1478867871.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:51.130Z,1478867871.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:51.494Z,1478867871.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:51.541Z,1478867871.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:51.895Z,1478867871.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:51.961Z,1478867871.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:52.300Z,1478867872.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:52.326Z,1478867872.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:52.695Z,1478867872.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:52.710Z,1478867872.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:53.096Z,1478867873.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:53.124Z,1478867873.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:53.495Z,1478867873.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:53.558Z,1478867873.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:53.895Z,1478867873.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:53.910Z,1478867873.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:54.299Z,1478867874.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:54.363Z,1478867874.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:54.698Z,1478867874.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:54.756Z,1478867874.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:55.103Z,1478867875.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:55.143Z,1478867875.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:55.502Z,1478867875.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:55.525Z,1478867875.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:55.895Z,1478867875.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:55.996Z,1478867875.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:56.299Z,1478867876.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:56.330Z,1478867876.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:56.695Z,1478867876.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:56.738Z,1478867876.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:57.093Z,1478867877.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:57.128Z,1478867877.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:57.497Z,1478867877.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:57.522Z,1478867877.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:57.893Z,1478867877.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:57.977Z,1478867877.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:58.299Z,1478867878.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:58.314Z,1478867878.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:58.697Z,1478867878.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:58.712Z,1478867878.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:59.099Z,1478867879.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:59.114Z,1478867879.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:59.500Z,1478867879.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:59.515Z,1478867879.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:37:59.904Z,1478867879.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:37:59.984Z,1478867879.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:00.293Z,1478867880.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:00.325Z,1478867880.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:00.693Z,1478867880.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:00.718Z,1478867880.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:01.093Z,1478867881.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:01.125Z,1478867881.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:01.497Z,1478867881.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:01.522Z,1478867881.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:01.893Z,1478867881.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:01.994Z,1478867881.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:02.300Z,1478867882.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:02.333Z,1478867882.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:02.693Z,1478867882.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:02.738Z,1478867882.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:03.093Z,1478867883.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:03.108Z,1478867883.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:03.493Z,1478867883.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:03.513Z,1478867883.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:03.897Z,1478867883.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:03.912Z,1478867883.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:04.298Z,1478867884.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:04.317Z,1478867884.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:04.701Z,1478867884.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:04.716Z,1478867884.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:05.099Z,1478867885.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:05.156Z,1478867885.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:05.244Z,1478867885.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:05.500Z,1478867885.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:05.515Z,1478867885.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:05.903Z,1478867885.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:05.932Z,1478867885.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:06.040Z,1478867886.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:06.304Z,1478867886.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:06.322Z,1478867886.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:06.700Z,1478867886.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:06.756Z,1478867886.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:07.095Z,1478867887.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:07.126Z,1478867887.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:07.500Z,1478867887.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:07.521Z,1478867887.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:07.893Z,1478867887.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:07.949Z,1478867887.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:08.293Z,1478867888.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:08.313Z,1478867888.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:08.693Z,1478867888.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:08.744Z,1478867888.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:09.102Z,1478867889.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:09.233Z,1478867889.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:09.497Z,1478867889.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:09.529Z,1478867889.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:09.908Z,1478867889.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:09.965Z,1478867889.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:10.293Z,1478867890.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:10.313Z,1478867890.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:10.694Z,1478867890.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:10.709Z,1478867890.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:11.097Z,1478867891.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:11.116Z,1478867891.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:11.494Z,1478867891.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:11.509Z,1478867891.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:11.896Z,1478867891.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:11.919Z,1478867891.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:12.297Z,1478867892.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:12.312Z,1478867892.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:12.693Z,1478867892.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:12.714Z,1478867892.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:13.097Z,1478867893.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:13.113Z,1478867893.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:13.497Z,1478867893.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:13.521Z,1478867893.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:13.895Z,1478867893.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:13.923Z,1478867893.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:14.297Z,1478867894.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:14.317Z,1478867894.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:14.693Z,1478867894.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:14.708Z,1478867894.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:15.097Z,1478867895.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:15.112Z,1478867895.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:15.493Z,1478867895.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:15.516Z,1478867895.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:15.901Z,1478867895.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:15.928Z,1478867895.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:16.293Z,1478867896.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:16.325Z,1478867896.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:16.697Z,1478867896.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:16.718Z,1478867896.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:17.093Z,1478867897.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:17.110Z,1478867897.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:17.497Z,1478867897.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:17.517Z,1478867897.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:17.893Z,1478867897.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:17.913Z,1478867897.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:18.297Z,1478867898.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:18.313Z,1478867898.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:18.708Z,1478867898.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:18.726Z,1478867898.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:19.098Z,1478867899.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:19.117Z,1478867899.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:19.497Z,1478867899.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:19.559Z,1478867899.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:19.898Z,1478867899.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:19.914Z,1478867899.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:20.297Z,1478867900.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:20.321Z,1478867900.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:20.695Z,1478867900.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:20.713Z,1478867900.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:21.097Z,1478867901.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:21.149Z,1478867901.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:21.493Z,1478867901.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:21.509Z,1478867901.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:21.897Z,1478867901.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:21.942Z,1478867901.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:22.295Z,1478867902.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:22.312Z,1478867902.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:22.693Z,1478867902.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:22.742Z,1478867902.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:23.094Z,1478867903.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:23.141Z,1478867903.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:23.497Z,1478867903.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:23.516Z,1478867903.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:23.902Z,1478867903.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:23.925Z,1478867903.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:24.293Z,1478867904.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:24.328Z,1478867904.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:24.702Z,1478867904.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:24.748Z,1478867904.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:25.098Z,1478867905.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:25.121Z,1478867905.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:25.496Z,1478867905.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:25.511Z,1478867905.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:25.897Z,1478867905.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:25.936Z,1478867905.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:26.297Z,1478867906.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:26.321Z,1478867906.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:26.693Z,1478867906.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:26.711Z,1478867906.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:27.099Z,1478867907.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:27.115Z,1478867907.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:27.493Z,1478867907.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:27.522Z,1478867907.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:27.902Z,1478867907.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:27.927Z,1478867907.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:28.299Z,1478867908.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:28.315Z,1478867908.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:28.695Z,1478867908.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:28.710Z,1478867908.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:29.097Z,1478867909.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:29.124Z,1478867909.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:29.494Z,1478867909.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:29.514Z,1478867909.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:29.902Z,1478867909.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:29.926Z,1478867909.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:30.296Z,1478867910.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:30.317Z,1478867910.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:30.697Z,1478867910.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:30.725Z,1478867910.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:31.093Z,1478867911.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:31.112Z,1478867911.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:31.499Z,1478867911.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:31.515Z,1478867911.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:31.899Z,1478867911.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:31.914Z,1478867911.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:32.297Z,1478867912.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:32.322Z,1478867912.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:38.349Z,1478867918.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:38.356Z,1478867918.355 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T12:38:38.356Z,1478867918.356 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T12:38:38.356Z,1478867918.356 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T12:38:38.357Z,1478867918.357 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T12:38:38.357Z,1478867918.357 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T12:38:38.357Z,1478867918.358 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T12:38:38.358Z,1478867918.358 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T12:38:38.358Z,1478867918.358 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T12:38:38.359Z,1478867918.359 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T12:38:38.359Z,1478867918.359 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T12:38:38.359Z,1478867918.359 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T12:38:38.360Z,1478867918.360 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T12:38:38.360Z,1478867918.360 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T12:38:38.361Z,1478867918.361 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T12:38:38.361Z,1478867918.361 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T12:38:38.375Z,1478867918.375 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-11-11T12:38:38.375Z,1478867918.375 [PNI_TCM] Data Fault, FailCount= 1
2016-11-11T12:38:38.375Z,1478867918.375 [PNI_TCM](ERROR): Data Fault
2016-11-11T12:38:38.395Z,1478867918.395 [BPC1](ERROR): Failed to receive battery data
2016-11-11T12:38:38.395Z,1478867918.395 [BPC1] Communications Fault, FailCount= 1
2016-11-11T12:38:38.395Z,1478867918.395 [BPC1](ERROR): Communications Fault
2016-11-11T12:38:38.415Z,1478867918.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.094000 seconds old.
2016-11-11T12:38:38.417Z,1478867918.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:38.418Z,1478867918.418 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.094400 seconds old.
2016-11-11T12:38:38.420Z,1478867918.420 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 6.094900 seconds old.
2016-11-11T12:38:38.423Z,1478867918.422 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.095400 seconds old.
2016-11-11T12:38:38.442Z,1478867918.443 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 6.114200 seconds old.
2016-11-11T12:38:38.468Z,1478867918.468 [CBIT](ERROR): Data Fault in component: PNI_TCM
2016-11-11T12:38:38.469Z,1478867918.469 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T12:38:38.521Z,1478867918.521 [PNI_TCM](INFO): Powering down
2016-11-11T12:38:38.536Z,1478867918.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.214300 seconds old.
2016-11-11T12:38:38.537Z,1478867918.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:38.538Z,1478867918.538 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.214900 seconds old.
2016-11-11T12:38:38.544Z,1478867918.544 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 6.218500 seconds old.
2016-11-11T12:38:38.546Z,1478867918.546 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.219000 seconds old.
2016-11-11T12:38:38.559Z,1478867918.559 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 6.226700 seconds old.
2016-11-11T12:38:38.908Z,1478867918.908 [PNI_TCM](FAULT): LCB fault:  Software Overcurrent.
2016-11-11T12:38:38.908Z,1478867918.908 [PNI_TCM] Hardware Fault, FailCount= 1
2016-11-11T12:38:38.908Z,1478867918.908 [PNI_TCM](ERROR): Hardware Fault
2016-11-11T12:38:38.916Z,1478867918.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.594300 seconds old.
2016-11-11T12:38:38.917Z,1478867918.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:38.918Z,1478867918.918 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.594700 seconds old.
2016-11-11T12:38:38.924Z,1478867918.924 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 6.599300 seconds old.
2016-11-11T12:38:38.931Z,1478867918.931 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.599900 seconds old.
2016-11-11T12:38:38.933Z,1478867918.933 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 6.604700 seconds old.
2016-11-11T12:38:39.312Z,1478867919.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.990000 seconds old.
2016-11-11T12:38:39.313Z,1478867919.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:39.314Z,1478867919.314 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.990500 seconds old.
2016-11-11T12:38:39.316Z,1478867919.316 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 6.991100 seconds old.
2016-11-11T12:38:39.319Z,1478867919.319 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.991500 seconds old.
2016-11-11T12:38:39.320Z,1478867919.320 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 6.991900 seconds old.
2016-11-11T12:38:39.345Z,1478867919.345 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:38:39.345Z,1478867919.345 [BPC1] No Fault, FailCount= 1
2016-11-11T12:38:39.804Z,1478867919.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.482200 seconds old.
2016-11-11T12:38:39.805Z,1478867919.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:39.806Z,1478867919.806 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.482600 seconds old.
2016-11-11T12:38:39.817Z,1478867919.816 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 7.491200 seconds old.
2016-11-11T12:38:39.827Z,1478867919.827 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.491900 seconds old.
2016-11-11T12:38:39.829Z,1478867919.829 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 7.500400 seconds old.
2016-11-11T12:38:39.930Z,1478867919.930 [CBIT](INFO): Clearing failed state for component PNI_TCM
2016-11-11T12:38:39.930Z,1478867919.930 [PNI_TCM] No Fault, FailCount= 1
2016-11-11T12:38:40.132Z,1478867920.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.810200 seconds old.
2016-11-11T12:38:40.133Z,1478867920.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:40.134Z,1478867920.134 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.810600 seconds old.
2016-11-11T12:38:40.152Z,1478867920.151 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 7.826300 seconds old.
2016-11-11T12:38:40.154Z,1478867920.154 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.827000 seconds old.
2016-11-11T12:38:40.156Z,1478867920.156 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 7.827400 seconds old.
2016-11-11T12:38:40.504Z,1478867920.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.182300 seconds old.
2016-11-11T12:38:40.505Z,1478867920.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:40.506Z,1478867920.506 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.182700 seconds old.
2016-11-11T12:38:40.509Z,1478867920.509 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 8.183700 seconds old.
2016-11-11T12:38:40.520Z,1478867920.520 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.192500 seconds old.
2016-11-11T12:38:40.521Z,1478867920.521 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 8.192900 seconds old.
2016-11-11T12:38:40.922Z,1478867920.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.600600 seconds old.
2016-11-11T12:38:40.923Z,1478867920.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:40.924Z,1478867920.924 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.601000 seconds old.
2016-11-11T12:38:40.927Z,1478867920.927 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 8.601400 seconds old.
2016-11-11T12:38:40.932Z,1478867920.932 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.604800 seconds old.
2016-11-11T12:38:40.933Z,1478867920.934 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 8.605300 seconds old.
2016-11-11T12:38:41.319Z,1478867921.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.998200 seconds old.
2016-11-11T12:38:41.321Z,1478867921.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:41.322Z,1478867921.322 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.998600 seconds old.
2016-11-11T12:38:41.324Z,1478867921.324 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 8.999000 seconds old.
2016-11-11T12:38:41.326Z,1478867921.326 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.999400 seconds old.
2016-11-11T12:38:41.340Z,1478867921.340 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 9.011300 seconds old.
2016-11-11T12:38:41.707Z,1478867921.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.385900 seconds old.
2016-11-11T12:38:41.709Z,1478867921.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:41.710Z,1478867921.710 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.386300 seconds old.
2016-11-11T12:38:41.712Z,1478867921.712 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 9.386700 seconds old.
2016-11-11T12:38:41.714Z,1478867921.714 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.387200 seconds old.
2016-11-11T12:38:41.740Z,1478867921.740 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 9.411600 seconds old.
2016-11-11T12:38:42.136Z,1478867922.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.814500 seconds old.
2016-11-11T12:38:42.137Z,1478867922.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:42.138Z,1478867922.138 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.814900 seconds old.
2016-11-11T12:38:42.141Z,1478867922.141 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 9.815900 seconds old.
2016-11-11T12:38:42.144Z,1478867922.144 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.816700 seconds old.
2016-11-11T12:38:42.145Z,1478867922.145 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 9.817000 seconds old.
2016-11-11T12:38:42.503Z,1478867922.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.182000 seconds old.
2016-11-11T12:38:42.505Z,1478867922.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:42.506Z,1478867922.506 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.182500 seconds old.
2016-11-11T12:38:42.520Z,1478867922.520 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 10.194300 seconds old.
2016-11-11T12:38:42.522Z,1478867922.522 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.195000 seconds old.
2016-11-11T12:38:42.524Z,1478867922.524 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 10.195400 seconds old.
2016-11-11T12:38:42.909Z,1478867922.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.587500 seconds old.
2016-11-11T12:38:42.910Z,1478867922.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:42.911Z,1478867922.911 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.587900 seconds old.
2016-11-11T12:38:42.914Z,1478867922.914 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 10.588500 seconds old.
2016-11-11T12:38:42.916Z,1478867922.916 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.589100 seconds old.
2016-11-11T12:38:42.918Z,1478867922.918 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 10.589400 seconds old.
2016-11-11T12:38:43.252Z,1478867923.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:43.326Z,1478867923.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:43.722Z,1478867923.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:44.048Z,1478867924.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:44.137Z,1478867924.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:44.456Z,1478867924.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:44.525Z,1478867924.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:44.925Z,1478867924.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:45.253Z,1478867925.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:45.330Z,1478867925.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:45.739Z,1478867925.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:46.048Z,1478867926.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:46.133Z,1478867926.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:46.456Z,1478867926.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:46.539Z,1478867926.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:46.937Z,1478867926.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:47.252Z,1478867927.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:47.317Z,1478867927.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:47.712Z,1478867927.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:48.048Z,1478867928.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:48.125Z,1478867928.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:48.519Z,1478867928.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:48.740Z,1478867928.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:48.919Z,1478867928.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:49.325Z,1478867929.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:49.536Z,1478867929.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:49.721Z,1478867929.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:50.129Z,1478867930.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:50.333Z,1478867930.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:50.533Z,1478867930.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:50.744Z,1478867930.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:50.925Z,1478867930.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:51.333Z,1478867931.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:51.540Z,1478867931.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:51.721Z,1478867931.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:52.122Z,1478867932.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:52.268Z,1478867932.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:52.551Z,1478867932.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:52.924Z,1478867932.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:53.064Z,1478867933.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:53.333Z,1478867933.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:53.717Z,1478867933.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:53.861Z,1478867933.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:54.121Z,1478867934.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:54.272Z,1478867934.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:54.520Z,1478867934.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:54.921Z,1478867934.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:55.068Z,1478867935.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:55.311Z,1478867935.311 [BPC1](ERROR): Failed to receive battery data
2016-11-11T12:38:55.311Z,1478867935.311 [BPC1] Communications Fault, FailCount= 2
2016-11-11T12:38:55.311Z,1478867935.311 [BPC1](ERROR): Communications Fault
2016-11-11T12:38:55.319Z,1478867935.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:55.356Z,1478867935.356 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T12:38:55.725Z,1478867935.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:55.868Z,1478867935.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:56.127Z,1478867936.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:56.288Z,1478867936.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:56.520Z,1478867936.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:56.539Z,1478867936.539 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:38:56.539Z,1478867936.539 [BPC1] No Fault, FailCount= 2
2016-11-11T12:38:57.009Z,1478867937.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:57.084Z,1478867937.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:57.353Z,1478867937.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:57.735Z,1478867937.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:57.881Z,1478867937.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:58.129Z,1478867938.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:58.292Z,1478867938.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:58.533Z,1478867938.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:58.942Z,1478867938.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:59.088Z,1478867939.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:38:59.331Z,1478867939.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:59.731Z,1478867939.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:38:59.884Z,1478867939.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:00.136Z,1478867940.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:00.380Z,1478867940.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:00.539Z,1478867940.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:00.938Z,1478867940.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:01.176Z,1478867941.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:01.312Z,1478867941.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:01.718Z,1478867941.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:01.972Z,1478867941.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:02.127Z,1478867942.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:02.525Z,1478867942.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:02.720Z,1478867942.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:02.920Z,1478867942.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:03.333Z,1478867943.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:03.516Z,1478867943.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:03.729Z,1478867943.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:04.126Z,1478867944.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:04.313Z,1478867944.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:04.530Z,1478867944.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:04.724Z,1478867944.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:04.934Z,1478867944.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:05.334Z,1478867945.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:05.520Z,1478867945.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:05.732Z,1478867945.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:06.124Z,1478867946.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:06.248Z,1478867946.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:06.522Z,1478867946.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:06.921Z,1478867946.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:07.044Z,1478867947.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:07.325Z,1478867947.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:07.724Z,1478867947.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:07.841Z,1478867947.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:08.131Z,1478867948.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:08.260Z,1478867948.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:08.541Z,1478867948.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:08.928Z,1478867948.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:09.058Z,1478867949.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:09.381Z,1478867949.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:09.740Z,1478867949.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:09.852Z,1478867949.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:10.155Z,1478867950.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:10.543Z,1478867950.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:10.648Z,1478867950.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:10.951Z,1478867950.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:11.056Z,1478867951.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:11.357Z,1478867951.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:11.725Z,1478867951.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:11.853Z,1478867951.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:12.139Z,1478867952.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:12.264Z,1478867952.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:12.522Z,1478867952.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:12.927Z,1478867952.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:13.060Z,1478867953.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:13.322Z,1478867953.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:13.738Z,1478867953.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:13.856Z,1478867953.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:14.131Z,1478867954.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:14.340Z,1478867954.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:14.530Z,1478867954.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:14.933Z,1478867954.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:15.136Z,1478867955.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:15.333Z,1478867955.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:15.737Z,1478867955.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:15.932Z,1478867955.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:16.133Z,1478867956.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:16.541Z,1478867956.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:16.696Z,1478867956.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:16.938Z,1478867956.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:17.319Z,1478867957.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:17.492Z,1478867957.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:17.729Z,1478867957.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:18.130Z,1478867958.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:18.289Z,1478867958.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:18.530Z,1478867958.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:18.700Z,1478867958.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:18.936Z,1478867958.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:19.332Z,1478867959.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:19.496Z,1478867959.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:19.717Z,1478867959.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:20.145Z,1478867960.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:20.244Z,1478867960.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:20.518Z,1478867960.518 [PNI_TCM](ERROR): CRC does not match. Expected:0x23383 got:0x34766
2016-11-11T12:39:20.538Z,1478867960.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:20.924Z,1478867960.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:21.040Z,1478867961.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:21.331Z,1478867961.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:21.741Z,1478867961.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:21.836Z,1478867961.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:22.134Z,1478867962.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:22.248Z,1478867962.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:22.526Z,1478867962.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:22.933Z,1478867962.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:23.044Z,1478867963.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:23.360Z,1478867963.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:23.765Z,1478867963.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:23.840Z,1478867963.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:24.130Z,1478867964.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:24.252Z,1478867964.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:24.525Z,1478867964.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:24.974Z,1478867964.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:25.064Z,1478867965.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:25.313Z,1478867965.313 [PNI_TCM](ERROR): CRC does not match. Expected:0x8537 got:0x48994
2016-11-11T12:39:25.330Z,1478867965.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:25.760Z,1478867965.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:25.860Z,1478867965.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:26.122Z,1478867966.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:26.268Z,1478867966.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:26.546Z,1478867966.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:26.930Z,1478867966.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:27.064Z,1478867967.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:27.333Z,1478867967.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:27.729Z,1478867967.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:27.860Z,1478867967.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:28.141Z,1478867968.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:28.328Z,1478867968.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:28.514Z,1478867968.514 [PNI_TCM](ERROR): CRC does not match. Expected:0x7936 got:0x1857
2016-11-11T12:39:28.534Z,1478867968.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:28.933Z,1478867968.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:29.124Z,1478867969.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:29.333Z,1478867969.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:29.725Z,1478867969.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:29.920Z,1478867969.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:30.129Z,1478867970.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:30.521Z,1478867970.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:30.676Z,1478867970.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:30.922Z,1478867970.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:31.333Z,1478867971.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:31.472Z,1478867971.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:31.723Z,1478867971.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:32.159Z,1478867972.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:32.269Z,1478867972.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:32.538Z,1478867972.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:32.684Z,1478867972.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:33.481Z,1478867973.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:34.204Z,1478867974.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:34.000Z,1478867975.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:35.797Z,1478867975.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:36.172Z,1478867976.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:36.208Z,1478867976.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:36.309Z,1478867976.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:36.675Z,1478867976.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:37.004Z,1478867977.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:37.081Z,1478867977.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:37.475Z,1478867977.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:37.811Z,1478867977.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:37.882Z,1478867977.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:38.280Z,1478867978.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:38.301Z,1478867978.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:38.705Z,1478867978.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:39.071Z,1478867979.071 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:39.071Z,1478867979.071 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 137
2016-11-11T12:39:39.071Z,1478867979.071 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:39:39.076Z,1478867979.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:39.079Z,1478867979.079 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:39.079Z,1478867979.079 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 137
2016-11-11T12:39:39.079Z,1478867979.079 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:39:39.081Z,1478867979.081 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:39.081Z,1478867979.081 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 137
2016-11-11T12:39:39.081Z,1478867979.081 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:39:39.127Z,1478867979.127 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:39:39.127Z,1478867979.127 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:39:39.128Z,1478867979.128 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:39:39.529Z,1478867979.529 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:39:39.529Z,1478867979.529 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 137
2016-11-11T12:39:39.530Z,1478867979.530 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:39:39.530Z,1478867979.530 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 137
2016-11-11T12:39:39.530Z,1478867979.530 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:39:39.531Z,1478867979.531 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 137
2016-11-11T12:39:39.870Z,1478867979.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:39:39.871Z,1478867979.871 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:39:39.872Z,1478867979.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:39.878Z,1478867979.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:39:39.883Z,1478867979.883 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:39:39.884Z,1478867979.884 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:39:39.884Z,1478867979.884 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:39:39.884Z,1478867979.884 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:39:39.885Z,1478867979.885 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:39:39.885Z,1478867979.885 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:39:40.280Z,1478867980.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:40.294Z,1478867980.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:40.697Z,1478867980.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:41.076Z,1478867981.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:41.086Z,1478867981.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:41.484Z,1478867981.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:41.873Z,1478867981.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:41.926Z,1478867981.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:42.271Z,1478867982.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:42.308Z,1478867982.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:42.671Z,1478867982.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:43.071Z,1478867983.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:43.104Z,1478867983.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:43.470Z,1478867983.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:43.871Z,1478867983.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:43.900Z,1478867983.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:44.292Z,1478867984.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:44.691Z,1478867984.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:44.696Z,1478867984.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:45.082Z,1478867985.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:45.104Z,1478867985.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:45.481Z,1478867985.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:45.885Z,1478867985.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:45.900Z,1478867985.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:46.298Z,1478867986.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:46.675Z,1478867986.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:46.700Z,1478867986.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:47.074Z,1478867987.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:47.473Z,1478867987.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:47.520Z,1478867987.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:47.875Z,1478867987.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:48.184Z,1478867988.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:48.276Z,1478867988.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:48.673Z,1478867988.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:48.980Z,1478867988.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:49.076Z,1478867989.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:49.485Z,1478867989.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:49.777Z,1478867989.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:49.890Z,1478867989.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:50.208Z,1478867990.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:50.284Z,1478867990.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:50.684Z,1478867990.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:51.004Z,1478867991.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:51.084Z,1478867991.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:51.484Z,1478867991.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:51.801Z,1478867991.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:51.884Z,1478867991.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:52.213Z,1478867992.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:52.317Z,1478867992.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:52.713Z,1478867992.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:53.008Z,1478867993.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:53.065Z,1478867993.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:53.498Z,1478867993.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:53.804Z,1478867993.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:53.891Z,1478867993.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:54.212Z,1478867994.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:54.305Z,1478867994.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:54.696Z,1478867994.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:55.008Z,1478867995.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:55.072Z,1478867995.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:55.477Z,1478867995.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:55.804Z,1478867995.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:55.944Z,1478867995.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:56.289Z,1478867996.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:56.304Z,1478867996.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:56.669Z,1478867996.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:57.064Z,1478867997.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:57.100Z,1478867997.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:57.493Z,1478867997.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:57.867Z,1478867997.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:57.896Z,1478867997.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:58.313Z,1478867998.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:58.642Z,1478867998.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:58.686Z,1478867998.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:59.077Z,1478867999.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:59.438Z,1478867999.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:39:59.486Z,1478867999.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:39:59.883Z,1478867999.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:00.232Z,1478868000.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:00.313Z,1478868000.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:00.644Z,1478868000.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:00.669Z,1478868000.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:01.065Z,1478868001.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:01.440Z,1478868001.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:01.473Z,1478868001.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:01.907Z,1478868001.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:02.184Z,1478868002.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:02.277Z,1478868002.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:02.677Z,1478868002.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:02.980Z,1478868002.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:03.077Z,1478868003.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:03.483Z,1478868003.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:03.777Z,1478868003.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:03.886Z,1478868003.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:04.188Z,1478868004.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:04.274Z,1478868004.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:04.673Z,1478868004.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:04.984Z,1478868004.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:05.081Z,1478868005.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:05.473Z,1478868005.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:05.781Z,1478868005.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:05.879Z,1478868005.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:06.188Z,1478868006.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:06.273Z,1478868006.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:06.702Z,1478868006.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:06.984Z,1478868006.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:07.105Z,1478868007.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:07.483Z,1478868007.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:07.780Z,1478868007.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:07.884Z,1478868007.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:08.188Z,1478868008.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:08.314Z,1478868008.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:08.690Z,1478868008.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:08.984Z,1478868008.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:09.102Z,1478868009.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:09.501Z,1478868009.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:09.780Z,1478868009.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:09.925Z,1478868009.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:10.267Z,1478868010.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:10.292Z,1478868010.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:10.668Z,1478868010.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:11.070Z,1478868011.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:11.088Z,1478868011.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:11.471Z,1478868011.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:11.872Z,1478868011.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:11.884Z,1478868011.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:12.306Z,1478868012.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:12.616Z,1478868012.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:12.684Z,1478868012.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:13.087Z,1478868013.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:13.412Z,1478868013.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:13.487Z,1478868013.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:13.882Z,1478868013.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:14.209Z,1478868014.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:14.302Z,1478868014.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:14.620Z,1478868014.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:14.681Z,1478868014.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:15.084Z,1478868015.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:15.416Z,1478868015.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:15.486Z,1478868015.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:15.885Z,1478868015.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:16.140Z,1478868016.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:16.285Z,1478868016.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:16.676Z,1478868016.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:16.936Z,1478868016.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:17.090Z,1478868017.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:17.492Z,1478868017.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:17.733Z,1478868017.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:17.896Z,1478868017.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:18.144Z,1478868018.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:18.292Z,1478868018.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:18.671Z,1478868018.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:18.940Z,1478868018.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:19.067Z,1478868019.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:19.471Z,1478868019.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:19.743Z,1478868019.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:19.876Z,1478868019.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:20.168Z,1478868020.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:20.272Z,1478868020.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:20.681Z,1478868020.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:20.964Z,1478868020.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:21.129Z,1478868021.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:21.509Z,1478868021.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:21.760Z,1478868021.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:21.885Z,1478868021.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:22.168Z,1478868022.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:22.269Z,1478868022.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:22.705Z,1478868022.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:22.964Z,1478868022.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:23.068Z,1478868023.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:23.493Z,1478868023.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:23.760Z,1478868023.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:23.943Z,1478868023.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:24.284Z,1478868024.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:24.288Z,1478868024.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:24.673Z,1478868024.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:25.067Z,1478868025.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:25.084Z,1478868025.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:25.472Z,1478868025.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:25.873Z,1478868025.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:25.880Z,1478868025.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:26.277Z,1478868026.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:26.592Z,1478868026.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:26.679Z,1478868026.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:27.077Z,1478868027.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:27.388Z,1478868027.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:27.472Z,1478868027.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:27.875Z,1478868027.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:28.185Z,1478868028.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:28.285Z,1478868028.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:28.596Z,1478868028.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:28.664Z,1478868028.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:29.068Z,1478868029.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:29.392Z,1478868029.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:29.473Z,1478868029.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:29.902Z,1478868029.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:30.108Z,1478868030.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:30.272Z,1478868030.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:30.671Z,1478868030.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:30.904Z,1478868030.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:31.071Z,1478868031.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:31.480Z,1478868031.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:31.701Z,1478868031.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:31.879Z,1478868031.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:31.888Z,1478868031.888 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T12:40:31.888Z,1478868031.888 [Default:CheckIn:C.Wait] Stopped
2016-11-11T12:40:31.888Z,1478868031.888 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T12:40:31.888Z,1478868031.888 [Default:CheckIn:D] Running Loop=1
2016-11-11T12:40:32.112Z,1478868032.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:32.272Z,1478868032.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:32.281Z,1478868032.281 [Default:CheckIn:D] Stopped
2016-11-11T12:40:32.282Z,1478868032.282 [Default:CheckIn:E] Running Loop=1
2016-11-11T12:40:32.689Z,1478868032.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:32.706Z,1478868032.706 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 470.516178 min 
2016-11-11T12:40:32.706Z,1478868032.706 [Default:CheckIn:E] Stopped
2016-11-11T12:40:32.706Z,1478868032.707 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T12:40:32.707Z,1478868032.707 [Default:CheckIn] Stopped
2016-11-11T12:40:32.707Z,1478868032.707 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T12:40:32.711Z,1478868032.711 [Default:CheckIn](INFO): Running loop #46
2016-11-11T12:40:32.711Z,1478868032.711 [Default:CheckIn] Running Loop=46
2016-11-11T12:40:32.711Z,1478868032.711 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T12:40:32.712Z,1478868032.712 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T12:40:32.908Z,1478868032.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:33.705Z,1478868033.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:34.124Z,1478868034.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:34.920Z,1478868034.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:35.716Z,1478868035.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:36.128Z,1478868036.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:36.420Z,1478868036.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:36.496Z,1478868036.496 [NAL9602](INFO): Powering up
2016-11-11T12:40:36.545Z,1478868036.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:36.924Z,1478868036.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:36.963Z,1478868036.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:37.329Z,1478868037.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:37.720Z,1478868037.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:37.783Z,1478868037.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:38.167Z,1478868038.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:38.220Z,1478868038.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:38.537Z,1478868038.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:38.916Z,1478868038.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:39.016Z,1478868039.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:39.329Z,1478868039.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:39.729Z,1478868039.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:39.812Z,1478868039.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:40.189Z,1478868040.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:40.529Z,1478868040.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:40.576Z,1478868040.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:40.929Z,1478868040.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:41.325Z,1478868041.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:41.372Z,1478868041.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:41.732Z,1478868041.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:42.168Z,1478868042.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:42.192Z,1478868042.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:42.541Z,1478868042.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:42.580Z,1478868042.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:42.921Z,1478868042.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:43.325Z,1478868043.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:43.376Z,1478868043.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:43.775Z,1478868043.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:44.100Z,1478868044.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:44.129Z,1478868044.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:44.529Z,1478868044.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:44.897Z,1478868044.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:44.926Z,1478868044.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:45.329Z,1478868045.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:45.693Z,1478868045.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:45.766Z,1478868045.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:46.104Z,1478868046.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:46.138Z,1478868046.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:46.535Z,1478868046.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:46.901Z,1478868046.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:46.929Z,1478868046.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:47.342Z,1478868047.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:47.687Z,1478868047.687 [NAL9602](INFO): NAL9602 initialized
2016-11-11T12:40:47.697Z,1478868047.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:47.780Z,1478868047.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:48.120Z,1478868048.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:48.121Z,1478868048.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:48.488Z,1478868048.488 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T12:40:48.488Z,1478868048.489 [NAL9602] Data Fault, FailCount= 2
2016-11-11T12:40:48.488Z,1478868048.489 [NAL9602](ERROR): Data Fault
2016-11-11T12:40:48.521Z,1478868048.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:48.573Z,1478868048.573 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T12:40:48.885Z,1478868048.885 [NAL9602](INFO): Powering down
2016-11-11T12:40:48.916Z,1478868048.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:48.934Z,1478868048.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:49.322Z,1478868049.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:49.712Z,1478868049.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:49.747Z,1478868049.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:49.805Z,1478868049.805 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T12:40:49.805Z,1478868049.805 [NAL9602] No Fault, FailCount= 2
2016-11-11T12:40:50.120Z,1478868050.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:50.181Z,1478868050.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:50.541Z,1478868050.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:50.916Z,1478868050.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:50.929Z,1478868050.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:51.362Z,1478868051.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:51.712Z,1478868051.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:51.724Z,1478868051.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:52.165Z,1478868052.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:52.214Z,1478868052.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:52.543Z,1478868052.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:52.958Z,1478868052.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:53.008Z,1478868053.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:53.338Z,1478868053.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:53.721Z,1478868053.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:53.804Z,1478868053.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:54.085Z,1478868054.085 [NAL9602](INFO): Powering up NAL9602
2016-11-11T12:40:54.205Z,1478868054.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:54.532Z,1478868054.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:54.568Z,1478868054.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:54.928Z,1478868054.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:55.329Z,1478868055.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:55.364Z,1478868055.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:55.724Z,1478868055.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:56.161Z,1478868056.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:56.201Z,1478868056.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:56.529Z,1478868056.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:56.572Z,1478868056.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:56.927Z,1478868056.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:57.329Z,1478868057.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:57.368Z,1478868057.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:57.751Z,1478868057.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:58.068Z,1478868058.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:58.138Z,1478868058.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:58.536Z,1478868058.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:58.867Z,1478868058.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:58.938Z,1478868058.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:59.336Z,1478868059.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:40:59.665Z,1478868059.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:40:59.760Z,1478868059.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:00.076Z,1478868060.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:00.129Z,1478868060.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:00.520Z,1478868060.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:00.872Z,1478868060.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:00.936Z,1478868060.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:01.329Z,1478868061.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:01.669Z,1478868061.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:01.746Z,1478868061.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:02.090Z,1478868062.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:02.133Z,1478868062.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:02.527Z,1478868062.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:02.884Z,1478868062.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:02.936Z,1478868062.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:03.333Z,1478868063.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:03.681Z,1478868063.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:03.764Z,1478868063.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:04.094Z,1478868064.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:04.133Z,1478868064.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:04.609Z,1478868064.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:04.885Z,1478868064.885 [NAL9602](INFO): NAL9602 initialized
2016-11-11T12:41:04.890Z,1478868064.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:04.957Z,1478868064.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:05.341Z,1478868065.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:05.684Z,1478868065.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:05.836Z,1478868065.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:06.145Z,1478868066.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:06.176Z,1478868066.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:06.573Z,1478868066.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:06.972Z,1478868066.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:06.975Z,1478868066.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:07.329Z,1478868067.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:07.726Z,1478868067.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:07.768Z,1478868067.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:08.197Z,1478868068.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:08.520Z,1478868068.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:08.546Z,1478868068.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:08.956Z,1478868068.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:09.316Z,1478868069.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:09.325Z,1478868069.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:09.726Z,1478868069.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:10.113Z,1478868070.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:10.197Z,1478868070.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:10.527Z,1478868070.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:10.584Z,1478868070.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:10.934Z,1478868070.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:11.333Z,1478868071.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:11.380Z,1478868071.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:11.739Z,1478868071.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:12.044Z,1478868072.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:12.137Z,1478868072.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:12.521Z,1478868072.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:12.840Z,1478868072.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:12.953Z,1478868072.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:13.322Z,1478868073.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:13.637Z,1478868073.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:13.734Z,1478868073.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:14.056Z,1478868074.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:14.125Z,1478868074.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:14.533Z,1478868074.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:14.852Z,1478868074.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:14.917Z,1478868074.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:15.341Z,1478868075.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:15.649Z,1478868075.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:15.742Z,1478868075.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:16.060Z,1478868076.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:16.130Z,1478868076.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:16.532Z,1478868076.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:16.856Z,1478868076.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:16.933Z,1478868076.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:17.325Z,1478868077.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:17.653Z,1478868077.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:17.740Z,1478868077.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:18.068Z,1478868078.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:18.136Z,1478868078.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:18.533Z,1478868078.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:18.864Z,1478868078.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:18.890Z,1478868078.890 [NAL9602](INFO): SBD MO Status=0, MOMSN=346, MT Status=0, MTMSN=0
2016-11-11T12:41:18.890Z,1478868078.890 [NAL9602](INFO): No messages in MT queue
2016-11-11T12:41:18.981Z,1478868078.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:19.365Z,1478868079.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:19.660Z,1478868079.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:19.797Z,1478868079.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:20.143Z,1478868080.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:20.180Z,1478868080.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:20.565Z,1478868080.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:20.916Z,1478868080.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:20.976Z,1478868080.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:21.354Z,1478868081.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:21.751Z,1478868081.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:21.772Z,1478868081.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:22.194Z,1478868082.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:22.508Z,1478868082.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:22.554Z,1478868082.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:22.954Z,1478868082.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:23.304Z,1478868083.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:23.366Z,1478868083.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:23.729Z,1478868083.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:24.101Z,1478868084.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:24.181Z,1478868084.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:24.512Z,1478868084.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:24.542Z,1478868084.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:24.941Z,1478868084.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:25.311Z,1478868085.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:25.341Z,1478868085.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:25.729Z,1478868085.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:26.032Z,1478868086.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:26.139Z,1478868086.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:26.544Z,1478868086.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:26.828Z,1478868086.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:26.960Z,1478868086.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:27.340Z,1478868087.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:27.635Z,1478868087.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:27.741Z,1478868087.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:28.056Z,1478868088.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:28.125Z,1478868088.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:28.527Z,1478868088.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:28.852Z,1478868088.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:28.942Z,1478868088.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:29.341Z,1478868089.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:29.649Z,1478868089.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:29.732Z,1478868089.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:30.060Z,1478868090.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:30.129Z,1478868090.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:30.530Z,1478868090.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:30.858Z,1478868090.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:30.942Z,1478868090.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:31.332Z,1478868091.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:31.652Z,1478868091.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:31.740Z,1478868091.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:32.060Z,1478868092.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:32.145Z,1478868092.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:32.545Z,1478868092.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:32.856Z,1478868092.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:32.954Z,1478868092.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:33.652Z,1478868093.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:34.116Z,1478868094.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:34.912Z,1478868094.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:35.708Z,1478868095.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:36.461Z,1478868096.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:36.496Z,1478868096.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:36.581Z,1478868096.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:36.985Z,1478868096.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:37.294Z,1478868097.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:37.413Z,1478868097.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:37.772Z,1478868097.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:38.089Z,1478868098.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:38.203Z,1478868098.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:38.504Z,1478868098.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:38.603Z,1478868098.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:38.975Z,1478868098.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:39.300Z,1478868099.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:39.373Z,1478868099.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:39.789Z,1478868099.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:40.004Z,1478868100.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:40.214Z,1478868100.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:40.596Z,1478868100.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:40.800Z,1478868100.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:40.957Z,1478868100.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:41.357Z,1478868101.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:41.597Z,1478868101.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:41.787Z,1478868101.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:42.008Z,1478868102.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:42.169Z,1478868102.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:42.565Z,1478868102.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:42.804Z,1478868102.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:42.973Z,1478868102.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:43.382Z,1478868103.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:43.601Z,1478868103.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:43.779Z,1478868103.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:44.012Z,1478868104.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:44.205Z,1478868104.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:44.570Z,1478868104.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:44.808Z,1478868104.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:44.986Z,1478868104.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:45.398Z,1478868105.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:45.605Z,1478868105.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:45.812Z,1478868105.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:46.016Z,1478868106.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:46.176Z,1478868106.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:46.573Z,1478868106.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:46.812Z,1478868106.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:46.970Z,1478868106.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:47.367Z,1478868107.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:47.608Z,1478868107.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:47.792Z,1478868107.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:48.104Z,1478868108.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:48.184Z,1478868108.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:48.589Z,1478868108.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:48.900Z,1478868108.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:48.986Z,1478868108.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:49.359Z,1478868109.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:49.696Z,1478868109.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:49.769Z,1478868109.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:50.221Z,1478868110.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:50.452Z,1478868110.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:50.577Z,1478868110.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:50.973Z,1478868110.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:51.248Z,1478868111.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:51.403Z,1478868111.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:51.782Z,1478868111.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:52.045Z,1478868112.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:52.178Z,1478868112.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:52.460Z,1478868112.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:52.607Z,1478868112.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:52.969Z,1478868112.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:53.256Z,1478868113.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:53.376Z,1478868113.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:53.780Z,1478868113.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:53.980Z,1478868113.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:54.181Z,1478868114.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:54.588Z,1478868114.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:54.776Z,1478868114.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:54.981Z,1478868114.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:55.356Z,1478868115.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:55.573Z,1478868115.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:55.785Z,1478868115.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:55.984Z,1478868115.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:56.187Z,1478868116.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:56.572Z,1478868116.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:56.780Z,1478868116.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:57.002Z,1478868117.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:57.397Z,1478868117.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:57.585Z,1478868117.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:57.796Z,1478868117.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:57.000Z,1478868118.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:58.163Z,1478868118.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:58.568Z,1478868118.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:58.796Z,1478868118.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:58.973Z,1478868118.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:59.369Z,1478868119.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:41:59.595Z,1478868119.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:41:59.781Z,1478868119.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:00.004Z,1478868120.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:00.193Z,1478868120.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:00.593Z,1478868120.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:00.800Z,1478868120.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:00.987Z,1478868120.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:01.381Z,1478868121.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:01.596Z,1478868121.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:01.786Z,1478868121.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:02.080Z,1478868122.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:02.205Z,1478868122.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:02.576Z,1478868122.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:02.877Z,1478868122.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:02.970Z,1478868122.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:03.373Z,1478868123.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:03.672Z,1478868123.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:03.777Z,1478868123.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:04.169Z,1478868124.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:04.432Z,1478868124.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:04.593Z,1478868124.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:04.973Z,1478868124.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:05.228Z,1478868125.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:05.376Z,1478868125.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:05.779Z,1478868125.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:06.025Z,1478868126.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:06.176Z,1478868126.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:06.436Z,1478868126.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:06.581Z,1478868126.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:06.986Z,1478868126.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:07.232Z,1478868127.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:07.359Z,1478868127.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:07.745Z,1478868127.745 [BPC1](ERROR): Failed to receive battery data
2016-11-11T12:42:07.745Z,1478868127.745 [BPC1] Communications Fault, FailCount= 1
2016-11-11T12:42:07.746Z,1478868127.746 [BPC1](ERROR): Communications Fault
2016-11-11T12:42:07.756Z,1478868127.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:07.796Z,1478868127.796 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T12:42:07.960Z,1478868127.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:08.195Z,1478868128.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:08.562Z,1478868128.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:08.756Z,1478868128.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:08.969Z,1478868128.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:09.014Z,1478868129.014 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:42:09.014Z,1478868129.014 [BPC1] No Fault, FailCount= 1
2016-11-11T12:42:09.422Z,1478868129.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:09.554Z,1478868129.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:09.817Z,1478868129.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:09.964Z,1478868129.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:10.155Z,1478868130.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:10.563Z,1478868130.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:10.767Z,1478868130.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:10.960Z,1478868130.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:11.363Z,1478868131.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:11.565Z,1478868131.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:11.766Z,1478868131.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:11.984Z,1478868131.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:12.174Z,1478868132.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:12.577Z,1478868132.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:12.780Z,1478868132.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:12.992Z,1478868132.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:13.410Z,1478868133.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:13.576Z,1478868133.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:13.788Z,1478868133.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:13.984Z,1478868133.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:14.181Z,1478868134.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:14.593Z,1478868134.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:14.780Z,1478868134.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:14.979Z,1478868134.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:15.398Z,1478868135.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:15.576Z,1478868135.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:15.765Z,1478868135.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:16.052Z,1478868136.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:16.205Z,1478868136.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:16.602Z,1478868136.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:16.848Z,1478868136.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:17.007Z,1478868137.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:17.369Z,1478868137.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:17.644Z,1478868137.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:17.773Z,1478868137.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:18.206Z,1478868138.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:18.420Z,1478868138.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:18.620Z,1478868138.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:18.982Z,1478868138.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:19.216Z,1478868139.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:19.373Z,1478868139.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:19.771Z,1478868139.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:20.013Z,1478868140.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:20.167Z,1478868140.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:20.424Z,1478868140.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:20.586Z,1478868140.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:20.980Z,1478868140.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:21.220Z,1478868141.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:21.383Z,1478868141.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:21.785Z,1478868141.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:21.940Z,1478868141.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:22.185Z,1478868142.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:22.563Z,1478868142.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:22.736Z,1478868142.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:22.966Z,1478868142.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:23.363Z,1478868143.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:23.533Z,1478868143.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:23.771Z,1478868143.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:23.948Z,1478868143.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:24.174Z,1478868144.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:24.577Z,1478868144.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:24.746Z,1478868144.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:24.985Z,1478868144.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:25.371Z,1478868145.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:25.541Z,1478868145.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:25.774Z,1478868145.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:25.952Z,1478868145.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:26.178Z,1478868146.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:26.576Z,1478868146.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:26.748Z,1478868146.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:26.982Z,1478868146.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:27.443Z,1478868147.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:27.568Z,1478868147.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:27.786Z,1478868147.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:27.976Z,1478868147.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:28.188Z,1478868148.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:28.590Z,1478868148.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:28.772Z,1478868148.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:28.974Z,1478868148.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:29.415Z,1478868149.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:29.568Z,1478868149.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:29.833Z,1478868149.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:30.044Z,1478868150.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:30.224Z,1478868150.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:30.656Z,1478868150.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:30.840Z,1478868150.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:31.002Z,1478868151.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:31.394Z,1478868151.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:31.636Z,1478868151.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:31.788Z,1478868151.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:32.184Z,1478868152.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:32.392Z,1478868152.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:32.601Z,1478868152.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:33.002Z,1478868153.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:33.188Z,1478868153.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:33.986Z,1478868153.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:34.400Z,1478868154.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:35.196Z,1478868155.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:35.924Z,1478868155.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:36.720Z,1478868156.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:37.517Z,1478868157.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:37.928Z,1478868157.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:38.076Z,1478868158.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:38.251Z,1478868158.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:38.620Z,1478868158.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:38.724Z,1478868158.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:39.049Z,1478868159.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:39.417Z,1478868159.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:39.521Z,1478868159.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:39.835Z,1478868159.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:39.932Z,1478868159.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:40.226Z,1478868160.226 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:40.226Z,1478868160.226 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 138
2016-11-11T12:42:40.226Z,1478868160.226 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:42:40.251Z,1478868160.251 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:40.251Z,1478868160.251 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 138
2016-11-11T12:42:40.251Z,1478868160.251 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:42:40.256Z,1478868160.256 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:40.257Z,1478868160.257 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 138
2016-11-11T12:42:40.257Z,1478868160.257 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:42:40.327Z,1478868160.328 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:42:40.328Z,1478868160.328 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:42:40.328Z,1478868160.328 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:42:40.667Z,1478868160.667 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:42:40.667Z,1478868160.667 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 138
2016-11-11T12:42:40.676Z,1478868160.676 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:42:40.676Z,1478868160.676 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 138
2016-11-11T12:42:40.677Z,1478868160.677 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:42:40.677Z,1478868160.677 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 138
2016-11-11T12:42:40.728Z,1478868160.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:41.033Z,1478868161.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:42:41.034Z,1478868161.034 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:42:41.034Z,1478868161.034 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:42:41.047Z,1478868161.047 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:42:41.048Z,1478868161.048 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:42:41.048Z,1478868161.048 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:42:41.049Z,1478868161.049 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:42:41.049Z,1478868161.049 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:42:41.049Z,1478868161.049 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:42:41.397Z,1478868161.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:41.524Z,1478868161.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:41.779Z,1478868161.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:41.936Z,1478868161.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:42.240Z,1478868162.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:42.665Z,1478868162.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:42.732Z,1478868162.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:43.009Z,1478868163.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:43.417Z,1478868163.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:43.529Z,1478868163.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:43.793Z,1478868163.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:44.016Z,1478868164.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:44.248Z,1478868164.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:44.611Z,1478868164.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:44.812Z,1478868164.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:45.039Z,1478868165.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:45.401Z,1478868165.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:45.608Z,1478868165.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:45.813Z,1478868165.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:46.220Z,1478868166.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:46.368Z,1478868166.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:46.592Z,1478868166.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:47.018Z,1478868167.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:47.164Z,1478868167.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:47.404Z,1478868167.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:47.808Z,1478868167.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:47.961Z,1478868167.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:48.194Z,1478868168.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:48.372Z,1478868168.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:48.609Z,1478868168.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:49.003Z,1478868169.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:49.169Z,1478868169.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:49.401Z,1478868169.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:49.817Z,1478868169.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:49.964Z,1478868169.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:50.207Z,1478868170.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:50.597Z,1478868170.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:50.760Z,1478868170.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:51.022Z,1478868171.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:51.397Z,1478868171.397 [PNI_TCM](ERROR): CRC does not match. Expected:0x19117 got:0x25050
2016-11-11T12:42:51.444Z,1478868171.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:51.556Z,1478868171.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:51.818Z,1478868171.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:52.191Z,1478868172.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:52.352Z,1478868172.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:52.598Z,1478868172.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:53.001Z,1478868173.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:53.148Z,1478868173.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:53.412Z,1478868173.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:53.783Z,1478868173.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:53.944Z,1478868173.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:54.205Z,1478868174.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:54.590Z,1478868174.589 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T12:42:54.617Z,1478868174.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:54.740Z,1478868174.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:55.005Z,1478868175.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:55.417Z,1478868175.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:55.537Z,1478868175.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:55.814Z,1478868175.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:56.190Z,1478868176.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:56.332Z,1478868176.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:56.593Z,1478868176.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:57.033Z,1478868177.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:57.128Z,1478868177.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:57.427Z,1478868177.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:57.782Z,1478868177.782 [PNI_TCM](ERROR): CRC does not match. Expected:0x132 got:0x7361
2016-11-11T12:42:57.826Z,1478868177.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:57.924Z,1478868177.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:58.193Z,1478868178.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:58.638Z,1478868178.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:58.720Z,1478868178.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:59.010Z,1478868179.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:59.389Z,1478868179.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:42:59.516Z,1478868179.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:42:59.775Z,1478868179.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:00.203Z,1478868180.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:00.312Z,1478868180.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:00.604Z,1478868180.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:00.997Z,1478868180.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:01.108Z,1478868181.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:01.386Z,1478868181.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:01.791Z,1478868181.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:01.904Z,1478868181.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:02.208Z,1478868182.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:02.573Z,1478868182.573 [PNI_TCM](ERROR): CRC does not match. Expected:0x44750 got:0x45596
2016-11-11T12:43:02.594Z,1478868182.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:02.702Z,1478868182.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:03.019Z,1478868183.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:03.391Z,1478868183.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:03.496Z,1478868183.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:03.801Z,1478868183.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:04.189Z,1478868184.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:04.292Z,1478868184.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:04.586Z,1478868184.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:04.988Z,1478868184.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:05.088Z,1478868185.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:05.397Z,1478868185.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:05.790Z,1478868185.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:05.886Z,1478868185.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:06.206Z,1478868186.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:06.607Z,1478868186.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:06.680Z,1478868186.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:07.006Z,1478868187.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:07.396Z,1478868187.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:07.477Z,1478868187.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:07.797Z,1478868187.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:08.175Z,1478868188.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:08.272Z,1478868188.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:08.600Z,1478868188.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:08.987Z,1478868188.987 [PNI_TCM](ERROR): CRC does not match. Expected:0x6670 got:0x16868
2016-11-11T12:43:09.025Z,1478868189.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:09.068Z,1478868189.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:09.406Z,1478868189.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:09.833Z,1478868189.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:09.864Z,1478868189.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:10.194Z,1478868190.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:10.376Z,1478868190.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:10.594Z,1478868190.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:10.784Z,1478868190.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:11.058Z,1478868191.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:11.192Z,1478868191.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:11.393Z,1478868191.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:11.600Z,1478868191.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:11.826Z,1478868191.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:12.008Z,1478868192.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:12.204Z,1478868192.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:12.416Z,1478868192.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:12.638Z,1478868192.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:12.824Z,1478868192.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:13.018Z,1478868193.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:13.232Z,1478868193.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:13.397Z,1478868193.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:13.640Z,1478868193.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:13.774Z,1478868193.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:14.048Z,1478868194.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:14.185Z,1478868194.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:14.456Z,1478868194.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:14.589Z,1478868194.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:14.864Z,1478868194.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:14.972Z,1478868194.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:14.993Z,1478868194.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:15.272Z,1478868195.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:15.377Z,1478868195.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:15.397Z,1478868195.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:15.778Z,1478868195.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:15.801Z,1478868195.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:16.068Z,1478868196.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:16.191Z,1478868196.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:16.476Z,1478868196.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:16.587Z,1478868196.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:16.986Z,1478868196.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:17.272Z,1478868197.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:17.394Z,1478868197.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:17.846Z,1478868197.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:17.860Z,1478868197.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:18.198Z,1478868198.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:18.604Z,1478868198.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:18.656Z,1478868198.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:19.001Z,1478868199.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:19.377Z,1478868199.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:19.452Z,1478868199.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:19.797Z,1478868199.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:19.864Z,1478868199.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:20.183Z,1478868200.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:20.589Z,1478868200.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:20.660Z,1478868200.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:20.994Z,1478868200.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:21.398Z,1478868201.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:21.456Z,1478868201.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:21.800Z,1478868201.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:21.868Z,1478868201.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:22.197Z,1478868202.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:22.597Z,1478868202.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:22.664Z,1478868202.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:23.017Z,1478868203.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:23.452Z,1478868203.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:23.461Z,1478868203.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:23.826Z,1478868203.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:23.872Z,1478868203.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:24.200Z,1478868204.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:24.599Z,1478868204.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:24.668Z,1478868204.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:25.021Z,1478868205.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:25.385Z,1478868205.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:25.464Z,1478868205.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:25.826Z,1478868205.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:25.950Z,1478868205.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:26.184Z,1478868206.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:26.617Z,1478868206.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:26.744Z,1478868206.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:27.024Z,1478868207.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:27.391Z,1478868207.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:27.540Z,1478868207.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:27.794Z,1478868207.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:28.180Z,1478868208.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:28.304Z,1478868208.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:28.588Z,1478868208.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:28.991Z,1478868208.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:29.100Z,1478868209.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:29.380Z,1478868209.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:29.794Z,1478868209.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:29.897Z,1478868209.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:30.209Z,1478868210.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:30.308Z,1478868210.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:30.605Z,1478868210.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:30.997Z,1478868210.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:31.104Z,1478868211.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:31.381Z,1478868211.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:31.780Z,1478868211.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:31.828Z,1478868211.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:32.186Z,1478868212.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:32.581Z,1478868212.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:32.624Z,1478868212.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:32.996Z,1478868212.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:33.421Z,1478868213.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:33.832Z,1478868213.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:34.628Z,1478868214.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:35.425Z,1478868215.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:35.836Z,1478868215.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:36.632Z,1478868216.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:36.644Z,1478868216.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:36.777Z,1478868216.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:37.157Z,1478868217.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:37.429Z,1478868217.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:37.542Z,1478868217.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:37.840Z,1478868217.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:37.973Z,1478868217.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:38.354Z,1478868218.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:38.636Z,1478868218.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:38.789Z,1478868218.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:39.156Z,1478868219.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:39.432Z,1478868219.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:39.641Z,1478868219.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:39.944Z,1478868219.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:39.948Z,1478868219.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:40.381Z,1478868220.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:40.744Z,1478868220.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:40.781Z,1478868220.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:41.169Z,1478868221.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:41.540Z,1478868221.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:41.553Z,1478868221.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:41.966Z,1478868221.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:42.284Z,1478868222.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:42.364Z,1478868222.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:42.754Z,1478868222.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:43.082Z,1478868223.082 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:43.151Z,1478868223.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:43.552Z,1478868223.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:43.877Z,1478868223.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:43.956Z,1478868223.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:44.324Z,1478868224.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:44.373Z,1478868224.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:44.765Z,1478868224.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:45.120Z,1478868225.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:45.166Z,1478868225.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:45.573Z,1478868225.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:45.804Z,1478868225.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:45.941Z,1478868225.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:46.341Z,1478868226.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:46.600Z,1478868226.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:46.753Z,1478868226.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:47.150Z,1478868227.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:47.397Z,1478868227.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:47.548Z,1478868227.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:47.808Z,1478868227.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:47.965Z,1478868227.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:48.364Z,1478868228.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:48.604Z,1478868228.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:48.753Z,1478868228.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:49.153Z,1478868229.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:49.401Z,1478868229.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:49.556Z,1478868229.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:49.816Z,1478868229.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:49.961Z,1478868229.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:50.354Z,1478868230.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:50.612Z,1478868230.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:50.752Z,1478868230.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:51.167Z,1478868231.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:51.409Z,1478868231.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:51.544Z,1478868231.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:51.613Z,1478868231.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:51.820Z,1478868231.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:51.921Z,1478868231.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:51.941Z,1478868231.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:52.330Z,1478868232.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:52.361Z,1478868232.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:52.616Z,1478868232.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:52.718Z,1478868232.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:52.785Z,1478868232.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:53.119Z,1478868233.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:53.134Z,1478868233.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:53.412Z,1478868233.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:53.533Z,1478868233.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:53.563Z,1478868233.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:53.940Z,1478868233.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:53.944Z,1478868233.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:53.997Z,1478868233.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:54.340Z,1478868234.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:54.364Z,1478868234.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:54.736Z,1478868234.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:54.740Z,1478868234.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:54.785Z,1478868234.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:55.177Z,1478868235.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:55.536Z,1478868235.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:55.548Z,1478868235.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:55.958Z,1478868235.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:56.252Z,1478868236.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:56.380Z,1478868236.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:56.756Z,1478868236.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:57.048Z,1478868237.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:57.150Z,1478868237.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:57.576Z,1478868237.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:57.845Z,1478868237.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:57.969Z,1478868237.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:58.256Z,1478868238.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:58.345Z,1478868238.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:58.748Z,1478868238.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:59.052Z,1478868239.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:59.153Z,1478868239.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:59.549Z,1478868239.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:43:59.784Z,1478868239.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:43:59.960Z,1478868239.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:00.354Z,1478868240.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:00.580Z,1478868240.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:00.761Z,1478868240.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:01.149Z,1478868241.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:01.392Z,1478868241.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:01.557Z,1478868241.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:01.808Z,1478868241.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:01.950Z,1478868241.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:02.353Z,1478868242.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:02.604Z,1478868242.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:02.763Z,1478868242.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:03.161Z,1478868243.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:03.401Z,1478868243.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:03.565Z,1478868243.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:03.812Z,1478868243.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:03.956Z,1478868243.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:04.357Z,1478868244.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:04.608Z,1478868244.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:04.762Z,1478868244.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:05.134Z,1478868245.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:05.404Z,1478868245.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:05.585Z,1478868245.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:05.812Z,1478868245.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:05.961Z,1478868245.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:06.340Z,1478868246.340 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T12:44:06.340Z,1478868246.340 [BPC1] Data Fault, FailCount= 1
2016-11-11T12:44:06.340Z,1478868246.340 [BPC1](ERROR): Data Fault
2016-11-11T12:44:06.365Z,1478868246.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:06.415Z,1478868246.415 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T12:44:06.608Z,1478868246.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:06.767Z,1478868246.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:07.145Z,1478868247.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:07.404Z,1478868247.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:07.576Z,1478868247.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:07.612Z,1478868247.612 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:44:07.612Z,1478868247.612 [BPC1] No Fault, FailCount= 1
2016-11-11T12:44:07.884Z,1478868247.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:08.009Z,1478868248.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:08.387Z,1478868248.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:08.680Z,1478868248.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:08.764Z,1478868248.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:09.173Z,1478868249.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:09.476Z,1478868249.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:09.556Z,1478868249.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:09.953Z,1478868249.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:10.232Z,1478868250.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:10.338Z,1478868250.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:10.739Z,1478868250.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:11.028Z,1478868251.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:11.142Z,1478868251.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:11.545Z,1478868251.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:11.825Z,1478868251.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:11.943Z,1478868251.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:12.236Z,1478868252.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:12.351Z,1478868252.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:12.749Z,1478868252.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:13.032Z,1478868253.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:13.185Z,1478868253.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:13.541Z,1478868253.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:13.760Z,1478868253.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:13.946Z,1478868253.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:14.349Z,1478868254.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:14.556Z,1478868254.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:14.788Z,1478868254.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:15.158Z,1478868255.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:15.353Z,1478868255.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:15.561Z,1478868255.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:15.764Z,1478868255.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:15.952Z,1478868255.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:16.356Z,1478868256.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:16.560Z,1478868256.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:16.761Z,1478868256.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:17.134Z,1478868257.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:17.357Z,1478868257.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:17.558Z,1478868257.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:17.768Z,1478868257.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:17.964Z,1478868257.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:18.361Z,1478868258.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:18.564Z,1478868258.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:18.758Z,1478868258.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:19.177Z,1478868259.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:19.361Z,1478868259.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:19.545Z,1478868259.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:19.772Z,1478868259.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:19.952Z,1478868259.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:20.362Z,1478868260.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:20.570Z,1478868260.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:20.756Z,1478868260.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:21.161Z,1478868261.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:21.364Z,1478868261.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:21.602Z,1478868261.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:21.872Z,1478868261.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:21.945Z,1478868261.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:22.362Z,1478868262.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:22.668Z,1478868262.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:22.759Z,1478868262.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:23.145Z,1478868263.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:23.464Z,1478868263.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:23.555Z,1478868263.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:23.956Z,1478868263.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:24.228Z,1478868264.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:24.357Z,1478868264.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:24.761Z,1478868264.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:25.024Z,1478868265.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:25.161Z,1478868265.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:25.556Z,1478868265.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:25.821Z,1478868265.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:25.965Z,1478868265.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:26.232Z,1478868266.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:26.347Z,1478868266.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:26.771Z,1478868266.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:27.028Z,1478868267.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:27.147Z,1478868267.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:27.553Z,1478868267.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:27.740Z,1478868267.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:27.945Z,1478868267.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:28.347Z,1478868268.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:28.536Z,1478868268.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:28.745Z,1478868268.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:29.144Z,1478868269.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:29.333Z,1478868269.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:29.553Z,1478868269.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:29.744Z,1478868269.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:29.000Z,1478868270.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:30.354Z,1478868270.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:30.540Z,1478868270.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:30.755Z,1478868270.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:31.157Z,1478868271.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:31.345Z,1478868271.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:31.561Z,1478868271.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:31.760Z,1478868271.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:31.958Z,1478868271.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:32.345Z,1478868272.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:32.557Z,1478868272.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:32.752Z,1478868272.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:33.147Z,1478868273.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:33.353Z,1478868273.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:33.764Z,1478868273.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:34.560Z,1478868274.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:35.356Z,1478868275.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:35.844Z,1478868275.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:36.554Z,1478868276.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:36.640Z,1478868276.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:36.689Z,1478868276.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:37.065Z,1478868277.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:37.437Z,1478868277.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:37.458Z,1478868277.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:37.855Z,1478868277.855 [BPC1](ERROR): Failed to receive battery data
2016-11-11T12:44:37.855Z,1478868277.855 [BPC1] Communications Fault, FailCount= 1
2016-11-11T12:44:37.855Z,1478868277.855 [BPC1](ERROR): Communications Fault
2016-11-11T12:44:37.892Z,1478868277.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:37.933Z,1478868277.932 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T12:44:38.196Z,1478868278.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:38.271Z,1478868278.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:38.675Z,1478868278.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:38.993Z,1478868278.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:39.087Z,1478868279.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:39.144Z,1478868279.144 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:44:39.144Z,1478868279.144 [BPC1] No Fault, FailCount= 1
2016-11-11T12:44:39.529Z,1478868279.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:39.789Z,1478868279.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:39.887Z,1478868279.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:40.200Z,1478868280.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:40.281Z,1478868280.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:40.661Z,1478868280.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:40.996Z,1478868280.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:41.063Z,1478868281.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:41.460Z,1478868281.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:41.720Z,1478868281.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:41.864Z,1478868281.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:42.273Z,1478868282.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:42.516Z,1478868282.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:42.679Z,1478868282.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:43.071Z,1478868283.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:43.313Z,1478868283.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:43.477Z,1478868283.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:43.724Z,1478868283.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:43.869Z,1478868283.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:44.255Z,1478868284.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:44.521Z,1478868284.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:44.692Z,1478868284.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:45.087Z,1478868285.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:45.317Z,1478868285.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:45.494Z,1478868285.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:45.732Z,1478868285.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:45.860Z,1478868285.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:46.256Z,1478868286.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:46.528Z,1478868286.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:46.658Z,1478868286.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:47.062Z,1478868287.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:47.325Z,1478868287.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:47.467Z,1478868287.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:47.740Z,1478868287.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:47.870Z,1478868287.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:48.281Z,1478868288.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:48.536Z,1478868288.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:48.676Z,1478868288.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:49.057Z,1478868289.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:49.332Z,1478868289.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:49.490Z,1478868289.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:49.839Z,1478868289.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:49.862Z,1478868289.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:50.268Z,1478868290.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:50.636Z,1478868290.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:50.674Z,1478868290.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:51.072Z,1478868291.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:51.433Z,1478868291.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:51.505Z,1478868291.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:51.882Z,1478868291.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:52.172Z,1478868292.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:52.270Z,1478868292.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:52.701Z,1478868292.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:52.968Z,1478868292.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:53.078Z,1478868293.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:53.492Z,1478868293.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:53.765Z,1478868293.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:53.892Z,1478868293.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:54.176Z,1478868294.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:54.287Z,1478868294.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:54.678Z,1478868294.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:54.972Z,1478868294.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:55.080Z,1478868295.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:55.457Z,1478868295.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:55.696Z,1478868295.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:55.854Z,1478868295.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:56.256Z,1478868296.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:56.492Z,1478868296.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:56.666Z,1478868296.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:57.089Z,1478868297.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:57.289Z,1478868297.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:57.494Z,1478868297.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:57.700Z,1478868297.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:57.865Z,1478868297.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:58.258Z,1478868298.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:58.496Z,1478868298.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:58.662Z,1478868298.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:59.062Z,1478868299.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:59.294Z,1478868299.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:59.473Z,1478868299.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:44:59.708Z,1478868299.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:44:59.873Z,1478868299.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:00.281Z,1478868300.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:00.504Z,1478868300.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:00.674Z,1478868300.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:01.072Z,1478868301.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:01.301Z,1478868301.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:01.472Z,1478868301.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:01.716Z,1478868301.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:01.877Z,1478868301.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:02.273Z,1478868302.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:02.512Z,1478868302.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:02.675Z,1478868302.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:03.115Z,1478868303.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:03.308Z,1478868303.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:03.477Z,1478868303.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:03.808Z,1478868303.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:03.870Z,1478868303.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:04.270Z,1478868304.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:04.604Z,1478868304.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:04.673Z,1478868304.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:05.079Z,1478868305.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:05.400Z,1478868305.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:05.465Z,1478868305.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:05.909Z,1478868305.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:06.148Z,1478868306.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:06.317Z,1478868306.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:06.673Z,1478868306.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:06.944Z,1478868306.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:07.102Z,1478868307.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:07.469Z,1478868307.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:07.741Z,1478868307.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:07.906Z,1478868307.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:08.152Z,1478868308.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:08.306Z,1478868308.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:08.676Z,1478868308.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:08.948Z,1478868308.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:09.079Z,1478868309.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:09.488Z,1478868309.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:09.676Z,1478868309.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:09.871Z,1478868309.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:10.273Z,1478868310.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:10.472Z,1478868310.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:10.661Z,1478868310.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:11.065Z,1478868311.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:11.269Z,1478868311.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:11.491Z,1478868311.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:11.684Z,1478868311.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:11.864Z,1478868311.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:12.273Z,1478868312.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:12.480Z,1478868312.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:12.664Z,1478868312.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:13.062Z,1478868313.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:13.287Z,1478868313.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:13.469Z,1478868313.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:13.700Z,1478868313.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:13.873Z,1478868313.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:14.267Z,1478868314.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:14.496Z,1478868314.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:14.675Z,1478868314.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:15.075Z,1478868315.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:15.292Z,1478868315.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:15.474Z,1478868315.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:15.700Z,1478868315.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:15.873Z,1478868315.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:16.257Z,1478868316.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:16.496Z,1478868316.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:16.661Z,1478868316.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:17.057Z,1478868317.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:17.292Z,1478868317.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:17.465Z,1478868317.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:17.760Z,1478868317.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:17.863Z,1478868317.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:18.273Z,1478868318.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:18.556Z,1478868318.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:18.670Z,1478868318.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:19.066Z,1478868319.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:19.352Z,1478868319.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:19.478Z,1478868319.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:19.890Z,1478868319.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:20.122Z,1478868320.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:20.261Z,1478868320.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:20.723Z,1478868320.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:20.916Z,1478868320.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:21.075Z,1478868321.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:21.477Z,1478868321.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:21.713Z,1478868321.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:21.892Z,1478868321.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:22.124Z,1478868322.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:22.269Z,1478868322.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:22.691Z,1478868322.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:22.920Z,1478868322.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:23.082Z,1478868323.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:23.473Z,1478868323.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:23.644Z,1478868323.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:23.887Z,1478868323.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:24.280Z,1478868324.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:24.440Z,1478868324.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:24.685Z,1478868324.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:25.081Z,1478868325.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:25.237Z,1478868325.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:25.460Z,1478868325.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:25.648Z,1478868325.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:25.861Z,1478868325.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:26.265Z,1478868326.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:26.444Z,1478868326.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:26.673Z,1478868326.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:27.067Z,1478868327.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:27.241Z,1478868327.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:27.471Z,1478868327.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:27.652Z,1478868327.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:27.872Z,1478868327.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:28.265Z,1478868328.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:28.448Z,1478868328.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:28.662Z,1478868328.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:29.073Z,1478868329.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:29.248Z,1478868329.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:29.471Z,1478868329.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:29.664Z,1478868329.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:29.881Z,1478868329.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:30.275Z,1478868330.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:30.460Z,1478868330.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:30.674Z,1478868330.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:31.076Z,1478868331.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:31.258Z,1478868331.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:31.473Z,1478868331.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:31.752Z,1478868331.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:31.854Z,1478868331.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:32.261Z,1478868332.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:32.548Z,1478868332.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:32.671Z,1478868332.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:33.087Z,1478868333.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:33.118Z,1478868333.118 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T12:40:32.7Z
2016-11-11T12:45:33.118Z,1478868333.118 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T12:45:33.118Z,1478868333.118 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T12:45:33.344Z,1478868333.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:33.470Z,1478868333.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:34.096Z,1478868334.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:34.892Z,1478868334.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:35.690Z,1478868335.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:36.100Z,1478868336.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:36.896Z,1478868336.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:37.533Z,1478868337.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:37.595Z,1478868337.595 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0184.lzma
2016-11-11T12:45:37.625Z,1478868337.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:37.656Z,1478868337.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:38.022Z,1478868338.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:38.420Z,1478868338.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:38.444Z,1478868338.444 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0184.lzma.bak
2016-11-11T12:45:38.444Z,1478868338.444 [DataOverHttps](INFO): SBD MOMSN=4555414
2016-11-11T12:45:38.506Z,1478868338.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:39.217Z,1478868339.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:39.628Z,1478868339.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:39.796Z,1478868339.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:39.933Z,1478868339.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:40.424Z,1478868340.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:41.221Z,1478868341.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:41.632Z,1478868341.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:42.428Z,1478868342.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:43.225Z,1478868343.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:43.277Z,1478868343.277 [NAL9602](INFO): Powering down
2016-11-11T12:45:43.370Z,1478868343.370 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:43.370Z,1478868343.370 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 139
2016-11-11T12:45:43.370Z,1478868343.370 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:45:43.377Z,1478868343.377 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:43.377Z,1478868343.377 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 139
2016-11-11T12:45:43.377Z,1478868343.377 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:45:43.379Z,1478868343.379 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:43.379Z,1478868343.379 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 139
2016-11-11T12:45:43.379Z,1478868343.379 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:45:43.394Z,1478868343.394 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:45:43.394Z,1478868343.394 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:45:43.394Z,1478868343.394 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:45:43.564Z,1478868343.564 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:45:43.564Z,1478868343.565 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 139
2016-11-11T12:45:43.565Z,1478868343.565 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:45:43.565Z,1478868343.565 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 139
2016-11-11T12:45:43.566Z,1478868343.566 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:45:43.566Z,1478868343.566 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 139
2016-11-11T12:45:43.636Z,1478868343.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:43.881Z,1478868343.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:45:43.881Z,1478868343.881 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:45:43.882Z,1478868343.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:45:43.888Z,1478868343.888 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:45:43.889Z,1478868343.889 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:45:43.889Z,1478868343.889 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:45:43.890Z,1478868343.890 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:45:43.890Z,1478868343.890 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:45:43.891Z,1478868343.891 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:45:44.277Z,1478868344.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:44.432Z,1478868344.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:44.676Z,1478868344.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:45.079Z,1478868345.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:45.228Z,1478868345.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:45.709Z,1478868345.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:46.504Z,1478868346.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:47.300Z,1478868347.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:48.076Z,1478868348.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:48.400Z,1478868348.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:48.523Z,1478868348.523 [DataOverHttps](INFO): Sending 297 bytes from file Logs/20161111T044527/Express0185.lzma
2016-11-11T12:45:48.593Z,1478868348.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:48.873Z,1478868348.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:48.949Z,1478868348.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:49.297Z,1478868349.297 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0185.lzma.bak
2016-11-11T12:45:49.297Z,1478868349.297 [DataOverHttps](INFO): SBD MOMSN=4555416
2016-11-11T12:45:49.365Z,1478868349.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:49.669Z,1478868349.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:50.084Z,1478868350.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:50.646Z,1478868350.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:50.656Z,1478868350.656 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T12:45:50.656Z,1478868350.656 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T12:45:50.656Z,1478868350.656 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T12:45:50.744Z,1478868350.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:50.880Z,1478868350.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:51.596Z,1478868351.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:52.392Z,1478868352.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:53.191Z,1478868353.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:53.604Z,1478868353.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:54.400Z,1478868354.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:54.415Z,1478868354.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:54.557Z,1478868354.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:54.910Z,1478868354.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:55.197Z,1478868355.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:55.365Z,1478868355.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:55.608Z,1478868355.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:55.753Z,1478868355.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:56.112Z,1478868356.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:56.404Z,1478868356.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:56.526Z,1478868356.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:56.916Z,1478868356.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:57.201Z,1478868357.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:57.357Z,1478868357.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:57.608Z,1478868357.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:57.756Z,1478868357.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:57.776Z,1478868357.776 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T12:45:58.116Z,1478868358.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:58.404Z,1478868358.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:58.521Z,1478868358.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:58.921Z,1478868358.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:59.202Z,1478868359.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:59.344Z,1478868359.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:45:59.720Z,1478868359.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:45:59.720Z,1478868359.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:00.121Z,1478868360.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:00.516Z,1478868360.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:00.517Z,1478868360.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:00.900Z,1478868360.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:01.304Z,1478868361.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:01.312Z,1478868361.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:01.718Z,1478868361.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:02.036Z,1478868362.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:02.113Z,1478868362.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:02.509Z,1478868362.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:02.832Z,1478868362.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:02.909Z,1478868362.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:03.313Z,1478868363.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:03.629Z,1478868363.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:03.731Z,1478868363.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:04.048Z,1478868364.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:04.111Z,1478868364.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:04.543Z,1478868364.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:04.844Z,1478868364.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:04.925Z,1478868364.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:05.305Z,1478868365.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:05.572Z,1478868365.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:05.709Z,1478868365.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:06.112Z,1478868366.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:06.369Z,1478868366.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:06.508Z,1478868366.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:06.907Z,1478868366.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:07.165Z,1478868367.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:07.312Z,1478868367.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:07.576Z,1478868367.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:07.714Z,1478868367.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:08.118Z,1478868368.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:08.372Z,1478868368.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:08.680Z,1478868368.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:08.910Z,1478868368.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:09.169Z,1478868369.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:09.315Z,1478868369.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:09.580Z,1478868369.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:09.757Z,1478868369.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:10.116Z,1478868370.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:10.376Z,1478868370.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:10.517Z,1478868370.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:10.956Z,1478868370.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:11.173Z,1478868371.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:11.356Z,1478868371.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:11.584Z,1478868371.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:11.733Z,1478868371.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:12.129Z,1478868372.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:12.380Z,1478868372.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:12.521Z,1478868372.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:12.909Z,1478868372.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:13.176Z,1478868373.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:13.344Z,1478868373.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:13.712Z,1478868373.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:13.720Z,1478868373.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:14.112Z,1478868374.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:14.513Z,1478868374.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:14.516Z,1478868374.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:14.909Z,1478868374.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:15.312Z,1478868375.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:15.318Z,1478868375.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:15.722Z,1478868375.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:16.016Z,1478868376.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:16.110Z,1478868376.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:16.551Z,1478868376.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:16.812Z,1478868376.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:16.923Z,1478868376.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:17.316Z,1478868377.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:17.609Z,1478868377.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:17.713Z,1478868377.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:18.020Z,1478868378.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:18.117Z,1478868378.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:18.507Z,1478868378.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:18.816Z,1478868378.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:18.910Z,1478868378.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:19.328Z,1478868379.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:19.612Z,1478868379.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:19.712Z,1478868379.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:20.113Z,1478868380.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:20.408Z,1478868380.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:20.521Z,1478868380.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:20.920Z,1478868380.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:21.204Z,1478868381.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:21.312Z,1478868381.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:21.711Z,1478868381.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:21.000Z,1478868382.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:22.116Z,1478868382.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:22.513Z,1478868382.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:22.796Z,1478868382.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:22.912Z,1478868382.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:23.333Z,1478868383.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:23.592Z,1478868383.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:23.721Z,1478868383.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:24.145Z,1478868384.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:24.388Z,1478868384.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:24.509Z,1478868384.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:24.934Z,1478868384.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:25.184Z,1478868385.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:25.318Z,1478868385.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:25.742Z,1478868385.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:25.860Z,1478868385.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:26.151Z,1478868386.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:26.268Z,1478868386.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:26.552Z,1478868386.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:26.676Z,1478868386.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:26.909Z,1478868386.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:27.084Z,1478868387.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:27.317Z,1478868387.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:27.636Z,1478868387.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:27.713Z,1478868387.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:28.107Z,1478868388.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:28.433Z,1478868388.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:28.519Z,1478868388.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:28.913Z,1478868388.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:29.228Z,1478868389.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:29.311Z,1478868389.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:29.707Z,1478868389.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:29.992Z,1478868389.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:30.111Z,1478868390.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:30.508Z,1478868390.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:30.788Z,1478868390.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:30.913Z,1478868390.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:31.313Z,1478868391.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:31.585Z,1478868391.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:31.716Z,1478868391.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:31.000Z,1478868392.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:32.119Z,1478868392.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:32.520Z,1478868392.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:32.796Z,1478868392.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:32.916Z,1478868392.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:33.327Z,1478868393.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:33.524Z,1478868393.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:33.728Z,1478868393.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:34.124Z,1478868394.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:34.320Z,1478868394.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:34.527Z,1478868394.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:34.928Z,1478868394.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:35.117Z,1478868395.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:35.321Z,1478868395.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:35.528Z,1478868395.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:35.709Z,1478868395.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:36.125Z,1478868396.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:36.325Z,1478868396.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:36.507Z,1478868396.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:36.967Z,1478868396.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:37.121Z,1478868397.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:37.316Z,1478868397.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:37.532Z,1478868397.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:37.718Z,1478868397.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:38.126Z,1478868398.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:38.328Z,1478868398.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:38.514Z,1478868398.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:38.950Z,1478868398.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:39.129Z,1478868399.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:39.315Z,1478868399.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:39.552Z,1478868399.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:39.734Z,1478868399.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:40.157Z,1478868400.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:40.350Z,1478868400.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:40.515Z,1478868400.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:40.921Z,1478868400.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:41.144Z,1478868401.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:41.317Z,1478868401.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:41.620Z,1478868401.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:41.717Z,1478868401.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:42.123Z,1478868402.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:42.416Z,1478868402.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:42.520Z,1478868402.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:42.919Z,1478868402.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:43.212Z,1478868403.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:43.320Z,1478868403.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:43.721Z,1478868403.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:43.968Z,1478868403.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:44.119Z,1478868404.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:44.522Z,1478868404.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:44.764Z,1478868404.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:44.919Z,1478868404.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:45.321Z,1478868405.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:45.561Z,1478868405.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:45.720Z,1478868405.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:45.972Z,1478868405.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:46.119Z,1478868406.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:46.521Z,1478868406.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:46.768Z,1478868406.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:46.921Z,1478868406.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:47.329Z,1478868407.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:47.500Z,1478868407.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:47.713Z,1478868407.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:48.107Z,1478868408.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:48.296Z,1478868408.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:48.515Z,1478868408.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:48.911Z,1478868408.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:49.093Z,1478868409.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:49.321Z,1478868409.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:49.512Z,1478868409.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:49.716Z,1478868409.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:50.117Z,1478868410.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:50.308Z,1478868410.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:50.530Z,1478868410.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:50.917Z,1478868410.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:51.105Z,1478868411.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:51.319Z,1478868411.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:51.516Z,1478868411.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:52.312Z,1478868412.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:53.108Z,1478868413.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:53.520Z,1478868413.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:54.316Z,1478868414.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:54.701Z,1478868414.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:54.839Z,1478868414.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:55.112Z,1478868415.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:55.260Z,1478868415.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:55.617Z,1478868415.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:55.660Z,1478868415.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:56.012Z,1478868416.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:56.449Z,1478868416.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:56.456Z,1478868416.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:56.821Z,1478868416.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:57.252Z,1478868417.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:57.254Z,1478868417.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:57.646Z,1478868417.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:57.952Z,1478868417.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:58.030Z,1478868418.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:58.419Z,1478868418.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:58.748Z,1478868418.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:58.821Z,1478868418.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:59.219Z,1478868419.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:59.544Z,1478868419.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:46:59.656Z,1478868419.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:46:59.957Z,1478868419.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:00.029Z,1478868420.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:00.432Z,1478868420.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:00.752Z,1478868420.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:00.828Z,1478868420.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:01.228Z,1478868421.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:01.476Z,1478868421.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:01.629Z,1478868421.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:02.032Z,1478868422.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:02.272Z,1478868422.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:02.431Z,1478868422.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:02.832Z,1478868422.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:03.069Z,1478868423.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:03.232Z,1478868423.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:03.480Z,1478868423.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:03.638Z,1478868423.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:04.032Z,1478868424.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:04.276Z,1478868424.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:04.431Z,1478868424.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:04.831Z,1478868424.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:05.073Z,1478868425.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:05.230Z,1478868425.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:05.484Z,1478868425.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:05.636Z,1478868425.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:06.036Z,1478868426.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:06.280Z,1478868426.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:06.440Z,1478868426.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:06.833Z,1478868426.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:07.077Z,1478868427.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:07.234Z,1478868427.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:07.492Z,1478868427.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:07.625Z,1478868427.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:08.022Z,1478868428.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:08.288Z,1478868428.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:08.456Z,1478868428.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:08.830Z,1478868428.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:09.086Z,1478868429.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:09.230Z,1478868429.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:09.628Z,1478868429.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:09.653Z,1478868429.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:10.032Z,1478868430.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:10.424Z,1478868430.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:10.429Z,1478868430.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:10.888Z,1478868430.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:11.220Z,1478868431.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:11.241Z,1478868431.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:11.645Z,1478868431.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:11.928Z,1478868431.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:12.049Z,1478868432.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:12.440Z,1478868432.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:12.724Z,1478868432.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:12.837Z,1478868432.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:13.217Z,1478868433.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:13.521Z,1478868433.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:13.614Z,1478868433.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:13.932Z,1478868433.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:14.041Z,1478868434.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:14.421Z,1478868434.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:14.728Z,1478868434.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:14.816Z,1478868434.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:15.229Z,1478868435.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:15.456Z,1478868435.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:15.619Z,1478868435.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:16.020Z,1478868436.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:16.252Z,1478868436.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:16.428Z,1478868436.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:16.819Z,1478868436.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:17.049Z,1478868437.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:17.227Z,1478868437.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:17.460Z,1478868437.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:17.632Z,1478868437.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:18.029Z,1478868438.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:18.256Z,1478868438.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:18.422Z,1478868438.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:18.828Z,1478868438.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:19.053Z,1478868439.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:19.229Z,1478868439.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:19.464Z,1478868439.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:19.632Z,1478868439.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:20.029Z,1478868440.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:20.260Z,1478868440.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:20.425Z,1478868440.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:20.829Z,1478868440.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:21.057Z,1478868441.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:21.236Z,1478868441.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:21.468Z,1478868441.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:21.633Z,1478868441.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:22.036Z,1478868442.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:22.264Z,1478868442.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:22.418Z,1478868442.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:22.861Z,1478868442.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:23.060Z,1478868443.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:23.222Z,1478868443.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:23.622Z,1478868443.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:23.856Z,1478868443.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:24.033Z,1478868444.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:24.264Z,1478868444.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:24.465Z,1478868444.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:24.828Z,1478868444.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:25.060Z,1478868445.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:25.238Z,1478868445.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:25.632Z,1478868445.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:25.858Z,1478868445.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:26.045Z,1478868446.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:26.268Z,1478868446.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:26.438Z,1478868446.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:26.832Z,1478868446.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:27.064Z,1478868447.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:27.228Z,1478868447.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:27.645Z,1478868447.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:27.860Z,1478868447.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:28.045Z,1478868448.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:28.268Z,1478868448.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:28.418Z,1478868448.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:28.821Z,1478868448.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:29.064Z,1478868449.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:29.241Z,1478868449.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:29.472Z,1478868449.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:29.638Z,1478868449.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:30.057Z,1478868450.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:30.268Z,1478868450.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:30.429Z,1478868450.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:30.837Z,1478868450.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:31.065Z,1478868451.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:31.246Z,1478868451.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:31.476Z,1478868451.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:31.646Z,1478868451.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:32.034Z,1478868452.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:32.272Z,1478868452.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:32.433Z,1478868452.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:32.844Z,1478868452.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:33.068Z,1478868453.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:33.234Z,1478868453.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:33.476Z,1478868453.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:33.626Z,1478868453.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:34.027Z,1478868454.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:34.272Z,1478868454.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:34.446Z,1478868454.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:34.845Z,1478868454.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:35.068Z,1478868455.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:35.247Z,1478868455.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:35.476Z,1478868455.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:35.656Z,1478868455.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:36.033Z,1478868456.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:36.272Z,1478868456.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:36.425Z,1478868456.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:36.847Z,1478868456.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:37.068Z,1478868457.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:37.273Z,1478868457.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:37.568Z,1478868457.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:37.634Z,1478868457.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:38.032Z,1478868458.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:38.364Z,1478868458.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:38.462Z,1478868458.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:38.817Z,1478868458.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:39.160Z,1478868459.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:39.228Z,1478868459.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:39.697Z,1478868459.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:39.876Z,1478868459.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:40.019Z,1478868460.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:40.453Z,1478868460.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:40.672Z,1478868460.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:40.877Z,1478868460.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:41.232Z,1478868461.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:41.469Z,1478868461.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:41.645Z,1478868461.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:41.908Z,1478868461.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:42.051Z,1478868462.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:42.455Z,1478868462.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:42.704Z,1478868462.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:42.823Z,1478868462.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:43.242Z,1478868463.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:43.420Z,1478868463.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:47:43.643Z,1478868463.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:44.061Z,1478868464.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:44.505Z,1478868464.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:44.854Z,1478868464.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:45.262Z,1478868465.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:45.632Z,1478868465.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:46.045Z,1478868466.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:46.438Z,1478868466.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:46.846Z,1478868466.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:47.237Z,1478868467.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:47.637Z,1478868467.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:48.035Z,1478868468.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:48.443Z,1478868468.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:48.835Z,1478868468.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:49.237Z,1478868469.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:49.646Z,1478868469.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:50.034Z,1478868470.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:50.451Z,1478868470.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:50.829Z,1478868470.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:51.282Z,1478868471.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:51.635Z,1478868471.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:57.271Z,1478868477.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:57.398Z,1478868477.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:57.790Z,1478868477.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:58.157Z,1478868478.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:58.597Z,1478868478.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:59.050Z,1478868479.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:59.353Z,1478868479.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:47:59.755Z,1478868479.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:00.156Z,1478868480.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:00.561Z,1478868480.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:01.018Z,1478868481.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:01.353Z,1478868481.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:01.762Z,1478868481.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:02.157Z,1478868482.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:02.559Z,1478868482.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:03.026Z,1478868483.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:03.364Z,1478868483.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:03.764Z,1478868483.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:04.171Z,1478868484.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:04.565Z,1478868484.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:04.969Z,1478868484.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:05.361Z,1478868485.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:05.760Z,1478868485.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:06.163Z,1478868486.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:06.276Z,1478868486.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:06.565Z,1478868486.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:06.961Z,1478868486.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:07.072Z,1478868487.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:07.362Z,1478868487.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:07.769Z,1478868487.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:08.149Z,1478868488.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:08.548Z,1478868488.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:08.953Z,1478868488.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:09.356Z,1478868489.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:09.772Z,1478868489.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:10.185Z,1478868490.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:10.551Z,1478868490.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:11.023Z,1478868491.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:11.357Z,1478868491.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:11.777Z,1478868491.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:12.147Z,1478868492.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:12.573Z,1478868492.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:13.005Z,1478868493.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:13.349Z,1478868493.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:13.748Z,1478868493.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:14.148Z,1478868494.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:14.553Z,1478868494.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:14.980Z,1478868494.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:15.348Z,1478868495.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:15.747Z,1478868495.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:16.149Z,1478868496.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:16.548Z,1478868496.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:16.957Z,1478868496.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:17.349Z,1478868497.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:17.743Z,1478868497.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:18.147Z,1478868498.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:18.550Z,1478868498.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:18.948Z,1478868498.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:19.346Z,1478868499.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:19.748Z,1478868499.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:20.145Z,1478868500.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:20.549Z,1478868500.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:20.963Z,1478868500.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:21.353Z,1478868501.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:21.749Z,1478868501.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:22.148Z,1478868502.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:22.549Z,1478868502.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:22.949Z,1478868502.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:23.349Z,1478868503.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:23.777Z,1478868503.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:24.149Z,1478868504.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:24.557Z,1478868504.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:24.985Z,1478868504.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:25.347Z,1478868505.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:25.777Z,1478868505.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:26.148Z,1478868506.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:26.570Z,1478868506.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:26.982Z,1478868506.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:27.349Z,1478868507.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:27.748Z,1478868507.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:28.148Z,1478868508.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:28.548Z,1478868508.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:28.957Z,1478868508.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:29.353Z,1478868509.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:29.708Z,1478868509.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:29.857Z,1478868509.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:30.147Z,1478868510.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:30.513Z,1478868510.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:30.553Z,1478868510.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:30.960Z,1478868510.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:31.308Z,1478868511.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:31.347Z,1478868511.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:31.753Z,1478868511.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:32.112Z,1478868512.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:32.173Z,1478868512.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:32.564Z,1478868512.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:32.908Z,1478868512.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:32.947Z,1478868512.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:33.348Z,1478868513.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:33.711Z,1478868513.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:33.745Z,1478868513.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:34.153Z,1478868514.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:34.544Z,1478868514.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:34.948Z,1478868514.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:35.360Z,1478868515.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:35.749Z,1478868515.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:36.176Z,1478868516.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:36.557Z,1478868516.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:36.964Z,1478868516.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:37.410Z,1478868517.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:37.757Z,1478868517.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:38.165Z,1478868518.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:38.557Z,1478868518.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:38.620Z,1478868518.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:38.978Z,1478868518.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:39.028Z,1478868519.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:39.377Z,1478868519.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:39.436Z,1478868519.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:39.757Z,1478868519.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:39.844Z,1478868519.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:40.173Z,1478868520.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:40.252Z,1478868520.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:40.549Z,1478868520.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:40.660Z,1478868520.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:40.989Z,1478868520.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:41.068Z,1478868521.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:41.378Z,1478868521.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:41.476Z,1478868521.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:41.749Z,1478868521.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:42.157Z,1478868522.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:42.272Z,1478868522.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:42.549Z,1478868522.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:42.985Z,1478868522.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:43.068Z,1478868523.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:43.352Z,1478868523.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:43.476Z,1478868523.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:43.753Z,1478868523.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:44.150Z,1478868524.150 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:44.150Z,1478868524.151 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 140
2016-11-11T12:48:44.151Z,1478868524.151 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:48:44.157Z,1478868524.157 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:44.157Z,1478868524.158 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 140
2016-11-11T12:48:44.157Z,1478868524.158 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:48:44.160Z,1478868524.160 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:44.160Z,1478868524.160 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 140
2016-11-11T12:48:44.160Z,1478868524.160 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:48:44.199Z,1478868524.198 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:48:44.199Z,1478868524.199 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:48:44.204Z,1478868524.204 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:48:44.272Z,1478868524.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:44.573Z,1478868524.573 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:48:44.573Z,1478868524.573 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 140
2016-11-11T12:48:44.574Z,1478868524.574 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:48:44.574Z,1478868524.574 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 140
2016-11-11T12:48:44.574Z,1478868524.574 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:48:44.575Z,1478868524.575 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 140
2016-11-11T12:48:44.971Z,1478868524.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:48:44.976Z,1478868524.976 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:48:44.976Z,1478868524.976 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:48:44.997Z,1478868524.997 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:48:44.998Z,1478868524.997 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:48:44.998Z,1478868524.998 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:48:44.998Z,1478868524.998 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:48:44.999Z,1478868524.999 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:48:45.003Z,1478868525.003 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:48:45.068Z,1478868525.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:45.360Z,1478868525.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:45.476Z,1478868525.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:45.753Z,1478868525.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:46.161Z,1478868526.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:46.272Z,1478868526.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:46.560Z,1478868526.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:46.953Z,1478868526.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:47.068Z,1478868527.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:47.361Z,1478868527.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:47.800Z,1478868527.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:47.864Z,1478868527.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:48.149Z,1478868528.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:48.272Z,1478868528.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:48.549Z,1478868528.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:48.951Z,1478868528.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:49.068Z,1478868529.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:49.389Z,1478868529.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:49.757Z,1478868529.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:49.812Z,1478868529.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:50.160Z,1478868530.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:50.561Z,1478868530.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:50.608Z,1478868530.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:50.965Z,1478868530.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:51.398Z,1478868531.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:51.404Z,1478868531.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:51.777Z,1478868531.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:51.812Z,1478868531.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:52.609Z,1478868532.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:53.304Z,1478868533.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:54.100Z,1478868534.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:54.897Z,1478868534.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:55.309Z,1478868535.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:55.425Z,1478868535.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:55.547Z,1478868535.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:55.960Z,1478868535.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:56.104Z,1478868536.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:56.315Z,1478868536.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:56.754Z,1478868536.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:56.901Z,1478868536.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:57.154Z,1478868537.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:57.312Z,1478868537.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:57.519Z,1478868537.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:57.919Z,1478868537.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:58.108Z,1478868538.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:58.327Z,1478868538.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:58.725Z,1478868538.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:58.905Z,1478868538.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:59.120Z,1478868539.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:59.316Z,1478868539.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:48:59.521Z,1478868539.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:48:59.928Z,1478868539.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:00.320Z,1478868540.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:00.736Z,1478868540.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:01.140Z,1478868541.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:01.512Z,1478868541.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:01.917Z,1478868541.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:02.317Z,1478868542.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:02.716Z,1478868542.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:03.117Z,1478868543.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:03.520Z,1478868543.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:03.920Z,1478868543.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:04.329Z,1478868544.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:04.726Z,1478868544.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:05.129Z,1478868545.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:05.529Z,1478868545.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:05.931Z,1478868545.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:06.333Z,1478868546.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:06.717Z,1478868546.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:07.116Z,1478868547.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:07.516Z,1478868547.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:07.919Z,1478868547.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:08.325Z,1478868548.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:08.722Z,1478868548.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:09.205Z,1478868549.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:09.518Z,1478868549.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:09.970Z,1478868549.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:10.325Z,1478868550.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:10.806Z,1478868550.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:11.180Z,1478868551.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:11.531Z,1478868551.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:11.932Z,1478868551.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:12.324Z,1478868552.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:12.738Z,1478868552.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:13.137Z,1478868553.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:13.512Z,1478868553.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:13.917Z,1478868553.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:14.321Z,1478868554.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:14.715Z,1478868554.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:15.125Z,1478868555.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:15.525Z,1478868555.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:15.919Z,1478868555.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:16.325Z,1478868556.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:16.730Z,1478868556.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:17.136Z,1478868557.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:17.534Z,1478868557.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:17.932Z,1478868557.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:18.328Z,1478868558.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:18.737Z,1478868558.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:19.117Z,1478868559.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:19.525Z,1478868559.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:19.924Z,1478868559.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:20.326Z,1478868560.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:20.719Z,1478868560.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:21.119Z,1478868561.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:21.527Z,1478868561.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:21.930Z,1478868561.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:22.331Z,1478868562.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:22.729Z,1478868562.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:23.165Z,1478868563.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:23.549Z,1478868563.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:23.917Z,1478868563.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:24.352Z,1478868564.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:24.727Z,1478868564.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:25.173Z,1478868565.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:25.574Z,1478868565.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:25.918Z,1478868565.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:26.345Z,1478868566.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:26.714Z,1478868566.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:27.129Z,1478868567.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:27.522Z,1478868567.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:27.920Z,1478868567.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:28.331Z,1478868568.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:28.727Z,1478868568.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:29.125Z,1478868569.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:29.525Z,1478868569.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:29.926Z,1478868569.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:30.148Z,1478868570.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:49:30.320Z,1478868570.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:30.737Z,1478868570.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:30.944Z,1478868570.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:49:31.140Z,1478868571.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:31.520Z,1478868571.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:31.708Z,1478868571.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:49:31.921Z,1478868571.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:32.325Z,1478868572.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:32.504Z,1478868572.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:49:32.732Z,1478868572.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:33.122Z,1478868573.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:33.301Z,1478868573.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:49:33.559Z,1478868573.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:33.712Z,1478868573.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:49:33.927Z,1478868573.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:34.324Z,1478868574.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:34.729Z,1478868574.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:35.140Z,1478868575.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:35.521Z,1478868575.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:35.930Z,1478868575.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:36.332Z,1478868576.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:36.735Z,1478868576.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:37.145Z,1478868577.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:37.573Z,1478868577.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:37.929Z,1478868577.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:38.403Z,1478868578.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:38.725Z,1478868578.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:39.161Z,1478868579.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:39.549Z,1478868579.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:39.938Z,1478868579.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:40.336Z,1478868580.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:40.724Z,1478868580.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:41.153Z,1478868581.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:41.545Z,1478868581.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:41.923Z,1478868581.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:42.326Z,1478868582.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:42.738Z,1478868582.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:43.134Z,1478868583.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:43.534Z,1478868583.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:43.923Z,1478868583.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:44.132Z,1478868584.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:49:44.321Z,1478868584.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:44.737Z,1478868584.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:44.928Z,1478868584.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:49:45.130Z,1478868585.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:45.530Z,1478868585.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:45.688Z,1478868585.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:49:45.924Z,1478868585.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:46.324Z,1478868586.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:46.484Z,1478868586.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:49:46.734Z,1478868586.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:47.127Z,1478868587.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:47.286Z,1478868587.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:49:47.533Z,1478868587.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:47.704Z,1478868587.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:49:47.930Z,1478868587.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:48.326Z,1478868588.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:48.705Z,1478868588.705 [PNI_TCM](ERROR): CRC does not match. Expected:0x9535 got:0x49579
2016-11-11T12:49:48.733Z,1478868588.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:49.135Z,1478868589.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:49.537Z,1478868589.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:49.913Z,1478868589.913 [PNI_TCM](ERROR): CRC does not match. Expected:0x64983 got:0x7361
2016-11-11T12:49:49.937Z,1478868589.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:50.333Z,1478868590.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:50.726Z,1478868590.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:51.186Z,1478868591.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:51.515Z,1478868591.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:51.960Z,1478868591.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:55.498Z,1478868595.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:55.674Z,1478868595.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:55.977Z,1478868595.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:56.403Z,1478868596.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:56.775Z,1478868596.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:57.181Z,1478868597.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:57.572Z,1478868597.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:57.978Z,1478868597.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:58.385Z,1478868598.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:58.828Z,1478868598.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:59.177Z,1478868599.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:59.590Z,1478868599.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:49:59.989Z,1478868599.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:00.409Z,1478868600.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:00.774Z,1478868600.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:01.177Z,1478868601.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:01.566Z,1478868601.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:02.020Z,1478868602.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:02.377Z,1478868602.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:02.848Z,1478868602.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:03.179Z,1478868603.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:03.577Z,1478868603.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:03.973Z,1478868603.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:04.377Z,1478868604.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:04.824Z,1478868604.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:05.170Z,1478868605.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:05.573Z,1478868605.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:05.970Z,1478868605.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:06.370Z,1478868606.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:06.834Z,1478868606.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:07.177Z,1478868607.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:07.576Z,1478868607.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:07.978Z,1478868607.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:08.417Z,1478868608.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:08.834Z,1478868608.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:09.205Z,1478868609.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:09.565Z,1478868609.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:10.003Z,1478868610.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:10.403Z,1478868610.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:10.773Z,1478868610.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:11.189Z,1478868611.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:11.609Z,1478868611.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:11.996Z,1478868611.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:12.369Z,1478868612.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:12.773Z,1478868612.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:13.170Z,1478868613.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:13.574Z,1478868613.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:14.005Z,1478868614.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:14.377Z,1478868614.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:14.775Z,1478868614.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:15.278Z,1478868615.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:15.562Z,1478868615.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:15.989Z,1478868615.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:16.394Z,1478868616.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:16.869Z,1478868616.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:17.176Z,1478868617.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:17.573Z,1478868617.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:17.983Z,1478868617.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:18.380Z,1478868618.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:18.821Z,1478868618.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:19.181Z,1478868619.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:19.571Z,1478868619.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:19.977Z,1478868619.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:20.377Z,1478868620.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:20.826Z,1478868620.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:21.185Z,1478868621.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:21.581Z,1478868621.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:22.009Z,1478868622.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:22.379Z,1478868622.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:22.860Z,1478868622.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:23.170Z,1478868623.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:23.570Z,1478868623.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:23.999Z,1478868623.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:24.374Z,1478868624.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:24.806Z,1478868624.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:25.169Z,1478868625.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:25.605Z,1478868625.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:26.008Z,1478868626.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:26.068Z,1478868626.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:50:26.373Z,1478868626.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:26.773Z,1478868626.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:26.864Z,1478868626.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:50:27.202Z,1478868627.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:27.586Z,1478868627.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:27.988Z,1478868627.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:28.398Z,1478868628.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:28.770Z,1478868628.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:29.167Z,1478868629.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:29.585Z,1478868629.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:29.981Z,1478868629.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:30.371Z,1478868630.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:30.819Z,1478868630.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:31.188Z,1478868631.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:31.598Z,1478868631.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:31.973Z,1478868631.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:32.391Z,1478868632.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:32.859Z,1478868632.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:33.208Z,1478868633.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:33.587Z,1478868633.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:33.970Z,1478868633.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:34.373Z,1478868634.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:34.816Z,1478868634.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:35.172Z,1478868635.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:35.579Z,1478868635.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:35.973Z,1478868635.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:36.371Z,1478868636.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:36.822Z,1478868636.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:37.233Z,1478868637.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:37.578Z,1478868637.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:37.990Z,1478868637.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:38.379Z,1478868638.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:38.847Z,1478868638.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:39.201Z,1478868639.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:39.569Z,1478868639.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:39.965Z,1478868639.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:40.056Z,1478868640.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:50:40.369Z,1478868640.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:40.773Z,1478868640.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:40.852Z,1478868640.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:50:41.232Z,1478868641.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:41.579Z,1478868641.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:41.980Z,1478868641.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:42.371Z,1478868642.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:42.781Z,1478868642.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:43.233Z,1478868643.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:43.568Z,1478868643.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:43.992Z,1478868643.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:44.403Z,1478868644.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:44.814Z,1478868644.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:45.185Z,1478868645.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:45.583Z,1478868645.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:45.978Z,1478868645.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:46.378Z,1478868646.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:46.813Z,1478868646.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:47.179Z,1478868647.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:47.582Z,1478868647.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:47.988Z,1478868647.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:48.409Z,1478868648.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:48.775Z,1478868648.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:49.181Z,1478868649.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:49.589Z,1478868649.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:50.018Z,1478868650.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:50.383Z,1478868650.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:50.836Z,1478868650.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:50.845Z,1478868650.845 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T12:50:50.845Z,1478868650.845 [Default:CheckIn:C.Wait] Stopped
2016-11-11T12:50:50.845Z,1478868650.845 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T12:50:50.846Z,1478868650.846 [Default:CheckIn:D] Running Loop=1
2016-11-11T12:50:51.237Z,1478868651.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:51.246Z,1478868651.246 [Default:CheckIn:D] Stopped
2016-11-11T12:50:51.246Z,1478868651.246 [Default:CheckIn:E] Running Loop=1
2016-11-11T12:50:51.563Z,1478868651.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:51.596Z,1478868651.596 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 480.832259 min 
2016-11-11T12:50:51.596Z,1478868651.596 [Default:CheckIn:E] Stopped
2016-11-11T12:50:51.597Z,1478868651.597 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T12:50:51.597Z,1478868651.597 [Default:CheckIn] Stopped
2016-11-11T12:50:51.597Z,1478868651.597 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T12:50:51.597Z,1478868651.597 [Default:CheckIn](INFO): Running loop #47
2016-11-11T12:50:51.597Z,1478868651.597 [Default:CheckIn] Running Loop=47
2016-11-11T12:50:51.597Z,1478868651.597 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T12:50:51.597Z,1478868651.597 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T12:50:52.005Z,1478868652.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:55.340Z,1478868655.340 [NAL9602](INFO): Powering up
2016-11-11T12:50:55.407Z,1478868655.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:55.533Z,1478868655.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:55.929Z,1478868655.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:56.298Z,1478868656.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:56.694Z,1478868656.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:57.105Z,1478868657.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:57.502Z,1478868657.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:57.899Z,1478868657.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:58.306Z,1478868658.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:58.767Z,1478868658.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:59.099Z,1478868659.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:59.509Z,1478868659.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:50:59.910Z,1478868659.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:00.301Z,1478868660.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:00.752Z,1478868660.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:01.101Z,1478868661.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:01.501Z,1478868661.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:01.905Z,1478868661.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:02.305Z,1478868662.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:02.750Z,1478868662.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:03.105Z,1478868663.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:03.517Z,1478868663.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:03.908Z,1478868663.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:04.311Z,1478868664.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:04.737Z,1478868664.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:05.096Z,1478868665.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:05.497Z,1478868665.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:05.903Z,1478868665.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:06.261Z,1478868666.261 [NAL9602](INFO): NAL9602 initialized
2016-11-11T12:51:06.306Z,1478868666.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:06.709Z,1478868666.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:07.069Z,1478868667.069 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T12:51:07.069Z,1478868667.069 [NAL9602] Data Fault, FailCount= 1
2016-11-11T12:51:07.069Z,1478868667.069 [NAL9602](ERROR): Data Fault
2016-11-11T12:51:07.124Z,1478868667.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:07.168Z,1478868667.168 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T12:51:07.461Z,1478868667.461 [NAL9602](INFO): Powering down
2016-11-11T12:51:07.537Z,1478868667.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:07.930Z,1478868667.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:08.319Z,1478868668.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:08.339Z,1478868668.339 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T12:51:08.339Z,1478868668.339 [NAL9602] No Fault, FailCount= 1
2016-11-11T12:51:08.729Z,1478868668.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:09.097Z,1478868669.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:09.531Z,1478868669.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:09.935Z,1478868669.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:10.298Z,1478868670.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:10.708Z,1478868670.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:11.099Z,1478868671.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:11.505Z,1478868671.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:11.903Z,1478868671.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:12.300Z,1478868672.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:12.662Z,1478868672.662 [NAL9602](INFO): Powering up NAL9602
2016-11-11T12:51:12.759Z,1478868672.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:13.112Z,1478868673.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:13.508Z,1478868673.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:13.911Z,1478868673.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:14.312Z,1478868674.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:14.754Z,1478868674.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:15.116Z,1478868675.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:15.520Z,1478868675.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:15.892Z,1478868675.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:16.297Z,1478868676.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:16.721Z,1478868676.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:17.097Z,1478868677.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:17.511Z,1478868677.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:17.897Z,1478868677.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:18.302Z,1478868678.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:18.748Z,1478868678.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:19.109Z,1478868679.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:19.509Z,1478868679.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:19.911Z,1478868679.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:20.312Z,1478868680.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:20.712Z,1478868680.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:21.124Z,1478868681.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:21.504Z,1478868681.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:21.969Z,1478868681.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:22.298Z,1478868682.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:22.743Z,1478868682.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:23.178Z,1478868683.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:23.461Z,1478868683.461 [NAL9602](INFO): NAL9602 initialized
2016-11-11T12:51:23.526Z,1478868683.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:23.946Z,1478868683.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:24.310Z,1478868684.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:24.714Z,1478868684.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:25.182Z,1478868685.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:25.497Z,1478868685.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:25.901Z,1478868685.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:26.302Z,1478868686.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:26.742Z,1478868686.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:27.111Z,1478868687.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:27.507Z,1478868687.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:27.907Z,1478868687.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:28.303Z,1478868688.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:28.738Z,1478868688.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:29.102Z,1478868689.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:29.509Z,1478868689.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:29.909Z,1478868689.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:30.302Z,1478868690.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:30.720Z,1478868690.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:31.126Z,1478868691.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:31.512Z,1478868691.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:31.913Z,1478868691.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:32.313Z,1478868692.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:32.741Z,1478868692.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:33.101Z,1478868693.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:33.502Z,1478868693.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:33.905Z,1478868693.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:34.313Z,1478868694.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:34.748Z,1478868694.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:35.105Z,1478868695.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:35.541Z,1478868695.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:35.901Z,1478868695.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:36.341Z,1478868696.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:36.700Z,1478868696.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:37.178Z,1478868697.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:37.530Z,1478868697.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:37.916Z,1478868697.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:38.329Z,1478868698.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:38.729Z,1478868698.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:39.201Z,1478868699.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:39.499Z,1478868699.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:39.902Z,1478868699.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:40.306Z,1478868700.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:40.710Z,1478868700.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:41.109Z,1478868701.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:41.513Z,1478868701.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:41.920Z,1478868701.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:42.317Z,1478868702.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:42.711Z,1478868702.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:43.097Z,1478868703.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:43.496Z,1478868703.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:43.903Z,1478868703.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:44.299Z,1478868704.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:44.733Z,1478868704.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:45.108Z,1478868705.108 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:45.108Z,1478868705.108 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 141
2016-11-11T12:51:45.108Z,1478868705.109 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:51:45.115Z,1478868705.115 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:45.115Z,1478868705.115 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 141
2016-11-11T12:51:45.115Z,1478868705.115 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:51:45.117Z,1478868705.117 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:45.118Z,1478868705.118 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 141
2016-11-11T12:51:45.118Z,1478868705.118 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:51:45.144Z,1478868705.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:51:45.144Z,1478868705.144 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:51:45.145Z,1478868705.145 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:51:45.528Z,1478868705.528 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:51:45.528Z,1478868705.528 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 141
2016-11-11T12:51:45.529Z,1478868705.529 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:51:45.529Z,1478868705.529 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 141
2016-11-11T12:51:45.529Z,1478868705.529 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:51:45.530Z,1478868705.530 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 141
2016-11-11T12:51:45.862Z,1478868705.862 [NAL9602](INFO): SBD MO Status=2, MOMSN=347, MT Status=2, MTMSN=0
2016-11-11T12:51:45.862Z,1478868705.862 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T12:51:45.920Z,1478868705.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:51:45.920Z,1478868705.921 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:51:45.921Z,1478868705.921 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:51:45.930Z,1478868705.930 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:51:45.930Z,1478868705.930 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:51:45.931Z,1478868705.931 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:51:45.935Z,1478868705.935 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:51:45.936Z,1478868705.936 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:51:45.936Z,1478868705.936 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:51:46.325Z,1478868706.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:46.723Z,1478868706.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:47.100Z,1478868707.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:47.509Z,1478868707.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:47.904Z,1478868707.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:48.302Z,1478868708.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:48.767Z,1478868708.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:49.141Z,1478868709.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:49.502Z,1478868709.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:49.905Z,1478868709.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:50.326Z,1478868710.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:50.717Z,1478868710.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:51.178Z,1478868711.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:51.497Z,1478868711.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:51.928Z,1478868711.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:52.301Z,1478868712.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:55.919Z,1478868715.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:56.073Z,1478868716.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:56.416Z,1478868716.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:56.805Z,1478868716.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:57.194Z,1478868717.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:57.606Z,1478868717.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:58.013Z,1478868718.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:58.398Z,1478868718.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:58.801Z,1478868718.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:59.205Z,1478868719.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:59.601Z,1478868719.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:51:59.998Z,1478868719.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:00.405Z,1478868720.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:00.801Z,1478868720.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:01.200Z,1478868721.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:01.596Z,1478868721.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:02.006Z,1478868722.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:02.413Z,1478868722.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:02.813Z,1478868722.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:03.187Z,1478868723.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:03.586Z,1478868723.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:03.993Z,1478868723.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:04.394Z,1478868724.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:04.795Z,1478868724.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:05.201Z,1478868725.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:05.598Z,1478868725.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:06.005Z,1478868726.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:06.411Z,1478868726.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:06.810Z,1478868726.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:07.270Z,1478868727.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:07.595Z,1478868727.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:08.033Z,1478868728.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:08.401Z,1478868728.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:08.849Z,1478868728.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:09.195Z,1478868729.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:09.623Z,1478868729.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:10.029Z,1478868730.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:10.401Z,1478868730.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:10.848Z,1478868730.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:11.211Z,1478868731.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:11.609Z,1478868731.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:12.009Z,1478868732.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:12.423Z,1478868732.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:12.813Z,1478868732.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:13.194Z,1478868733.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:13.606Z,1478868733.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:13.996Z,1478868733.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:14.404Z,1478868734.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:14.808Z,1478868734.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:15.215Z,1478868735.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:15.603Z,1478868735.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:16.003Z,1478868736.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:16.394Z,1478868736.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:16.808Z,1478868736.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:17.206Z,1478868737.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:17.593Z,1478868737.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:17.986Z,1478868737.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:18.391Z,1478868738.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:18.795Z,1478868738.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:19.228Z,1478868739.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:19.607Z,1478868739.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:20.011Z,1478868740.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:20.399Z,1478868740.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:20.829Z,1478868740.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:21.201Z,1478868741.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:21.613Z,1478868741.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:22.033Z,1478868742.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:22.386Z,1478868742.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:22.803Z,1478868742.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:23.233Z,1478868743.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:23.639Z,1478868743.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:24.030Z,1478868744.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:24.432Z,1478868744.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:24.841Z,1478868744.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:25.253Z,1478868745.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:25.614Z,1478868745.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:26.018Z,1478868746.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:26.418Z,1478868746.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:26.826Z,1478868746.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:27.243Z,1478868747.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:27.608Z,1478868747.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:28.054Z,1478868748.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:28.420Z,1478868748.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:28.833Z,1478868748.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:29.218Z,1478868749.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:29.633Z,1478868749.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:30.018Z,1478868750.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:30.435Z,1478868750.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:30.829Z,1478868750.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:31.218Z,1478868751.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:31.626Z,1478868751.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:32.084Z,1478868752.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:32.393Z,1478868752.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:32.844Z,1478868752.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:33.208Z,1478868753.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:33.596Z,1478868753.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:34.041Z,1478868754.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:34.395Z,1478868754.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:34.846Z,1478868754.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:35.201Z,1478868755.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:35.606Z,1478868755.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:36.005Z,1478868756.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:36.462Z,1478868756.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:36.822Z,1478868756.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:37.252Z,1478868757.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:37.630Z,1478868757.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:38.035Z,1478868758.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:38.445Z,1478868758.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:38.832Z,1478868758.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:39.205Z,1478868759.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:39.605Z,1478868759.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:40.018Z,1478868760.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:40.439Z,1478868760.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:40.868Z,1478868760.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:41.209Z,1478868761.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:41.616Z,1478868761.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:42.017Z,1478868762.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:42.423Z,1478868762.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:42.810Z,1478868762.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:43.218Z,1478868763.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:43.612Z,1478868763.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:44.018Z,1478868764.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:44.405Z,1478868764.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:44.812Z,1478868764.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:45.222Z,1478868765.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:45.609Z,1478868765.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:46.037Z,1478868766.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:46.429Z,1478868766.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:46.798Z,1478868766.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:47.209Z,1478868767.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:47.615Z,1478868767.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:48.011Z,1478868768.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:48.412Z,1478868768.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:48.806Z,1478868768.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:49.257Z,1478868769.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:49.616Z,1478868769.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:50.004Z,1478868770.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:50.477Z,1478868770.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:50.812Z,1478868770.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:51.205Z,1478868771.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:51.648Z,1478868771.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:52.006Z,1478868772.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:52.429Z,1478868772.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:55.780Z,1478868775.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:55.925Z,1478868775.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:56.252Z,1478868776.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:56.661Z,1478868776.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:57.061Z,1478868777.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:57.461Z,1478868777.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:57.876Z,1478868777.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:58.273Z,1478868778.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:58.695Z,1478868778.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:59.053Z,1478868779.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:59.449Z,1478868779.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:52:59.853Z,1478868779.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:00.257Z,1478868780.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:00.653Z,1478868780.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:01.082Z,1478868781.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:01.468Z,1478868781.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:01.853Z,1478868781.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:02.269Z,1478868782.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:02.667Z,1478868782.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:03.082Z,1478868783.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:03.468Z,1478868783.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:03.846Z,1478868783.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:04.249Z,1478868784.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:04.649Z,1478868784.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:05.054Z,1478868785.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:05.451Z,1478868785.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:05.856Z,1478868785.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:06.270Z,1478868786.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:06.657Z,1478868786.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:07.049Z,1478868787.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:07.449Z,1478868787.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:07.877Z,1478868787.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:08.253Z,1478868788.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:08.649Z,1478868788.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:09.077Z,1478868789.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:09.453Z,1478868789.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:09.874Z,1478868789.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:10.281Z,1478868790.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:10.653Z,1478868790.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:11.063Z,1478868791.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:11.511Z,1478868791.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:11.853Z,1478868791.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:12.248Z,1478868792.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:12.651Z,1478868792.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:13.053Z,1478868793.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:13.445Z,1478868793.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:13.853Z,1478868793.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:14.257Z,1478868794.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:14.644Z,1478868794.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:15.053Z,1478868795.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:15.463Z,1478868795.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:15.858Z,1478868795.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:16.253Z,1478868796.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:16.657Z,1478868796.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:17.049Z,1478868797.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:17.453Z,1478868797.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:17.853Z,1478868797.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:18.249Z,1478868798.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:18.649Z,1478868798.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:19.053Z,1478868799.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:19.453Z,1478868799.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:19.845Z,1478868799.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:20.250Z,1478868800.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:20.648Z,1478868800.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:21.049Z,1478868801.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:21.473Z,1478868801.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:21.882Z,1478868801.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:22.253Z,1478868802.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:22.653Z,1478868802.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:23.074Z,1478868803.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:23.453Z,1478868803.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:23.881Z,1478868803.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:24.281Z,1478868804.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:24.666Z,1478868804.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:25.053Z,1478868805.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:25.442Z,1478868805.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:25.853Z,1478868805.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:26.255Z,1478868806.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:26.649Z,1478868806.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:27.049Z,1478868807.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:27.449Z,1478868807.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:27.849Z,1478868807.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:28.253Z,1478868808.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:28.649Z,1478868808.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:29.049Z,1478868809.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:29.450Z,1478868809.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:29.844Z,1478868809.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:30.249Z,1478868810.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:30.666Z,1478868810.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:31.053Z,1478868811.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:31.480Z,1478868811.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:31.853Z,1478868811.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:32.253Z,1478868812.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:32.669Z,1478868812.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:33.063Z,1478868813.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:33.466Z,1478868813.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:33.850Z,1478868813.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:34.214Z,1478868814.214 [NAL9602](INFO): SBD MO Status=2, MOMSN=347, MT Status=2, MTMSN=0
2016-11-11T12:53:34.214Z,1478868814.214 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T12:53:34.263Z,1478868814.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:34.669Z,1478868814.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:35.081Z,1478868815.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:35.457Z,1478868815.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:35.861Z,1478868815.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:36.262Z,1478868816.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:36.686Z,1478868816.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:37.057Z,1478868817.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:37.461Z,1478868817.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:37.873Z,1478868817.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:38.257Z,1478868818.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:38.689Z,1478868818.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:39.089Z,1478868819.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:39.461Z,1478868819.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:39.880Z,1478868819.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:40.268Z,1478868820.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:40.677Z,1478868820.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:41.050Z,1478868821.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:41.453Z,1478868821.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:41.852Z,1478868821.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:42.251Z,1478868822.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:42.655Z,1478868822.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:43.058Z,1478868823.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:43.452Z,1478868823.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:43.853Z,1478868823.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:44.273Z,1478868824.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:44.669Z,1478868824.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:45.066Z,1478868825.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:45.464Z,1478868825.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:45.865Z,1478868825.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:46.264Z,1478868826.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:46.664Z,1478868826.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:47.069Z,1478868827.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:47.464Z,1478868827.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:47.867Z,1478868827.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:48.269Z,1478868828.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:48.668Z,1478868828.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:49.043Z,1478868829.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:49.449Z,1478868829.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:49.881Z,1478868829.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:50.253Z,1478868830.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:50.698Z,1478868830.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:51.061Z,1478868831.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:51.457Z,1478868831.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:51.890Z,1478868831.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:52.265Z,1478868832.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:52.700Z,1478868832.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:56.153Z,1478868836.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:56.306Z,1478868836.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:56.629Z,1478868836.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:57.033Z,1478868837.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:57.430Z,1478868837.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:57.832Z,1478868837.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:58.237Z,1478868838.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:58.636Z,1478868838.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:58.998Z,1478868838.998 [NAL9602](INFO): SBD MO Status=2, MOMSN=347, MT Status=2, MTMSN=0
2016-11-11T12:53:58.998Z,1478868838.998 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T12:53:59.049Z,1478868839.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:59.442Z,1478868839.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:53:59.841Z,1478868839.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:00.239Z,1478868840.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:00.644Z,1478868840.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:01.040Z,1478868841.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:01.441Z,1478868841.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:01.849Z,1478868841.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:02.245Z,1478868842.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:02.648Z,1478868842.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:03.049Z,1478868843.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:03.467Z,1478868843.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:03.838Z,1478868843.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:04.249Z,1478868844.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:04.653Z,1478868844.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:05.030Z,1478868845.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:05.438Z,1478868845.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:05.842Z,1478868845.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:06.240Z,1478868846.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:06.645Z,1478868846.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:07.073Z,1478868847.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:07.425Z,1478868847.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:07.821Z,1478868847.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:08.285Z,1478868848.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:08.671Z,1478868848.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:09.029Z,1478868849.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:09.460Z,1478868849.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:09.831Z,1478868849.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:10.273Z,1478868850.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:10.665Z,1478868850.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:11.050Z,1478868851.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:11.443Z,1478868851.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:11.844Z,1478868851.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:12.242Z,1478868852.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:12.649Z,1478868852.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:13.041Z,1478868853.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:13.445Z,1478868853.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:13.827Z,1478868853.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:14.225Z,1478868854.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:14.656Z,1478868854.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:15.025Z,1478868855.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:15.433Z,1478868855.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:15.871Z,1478868855.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:16.243Z,1478868856.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:16.629Z,1478868856.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:17.041Z,1478868857.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:17.438Z,1478868857.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:17.836Z,1478868857.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:18.240Z,1478868858.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:18.640Z,1478868858.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:19.036Z,1478868859.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:19.437Z,1478868859.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:19.878Z,1478868859.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:20.246Z,1478868860.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:20.645Z,1478868860.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:21.025Z,1478868861.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:21.425Z,1478868861.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:21.829Z,1478868861.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:22.225Z,1478868862.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:22.665Z,1478868862.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:23.033Z,1478868863.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:23.468Z,1478868863.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:23.846Z,1478868863.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:24.254Z,1478868864.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:24.667Z,1478868864.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:25.029Z,1478868865.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:25.470Z,1478868865.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:25.832Z,1478868865.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:26.234Z,1478868866.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:26.636Z,1478868866.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:27.042Z,1478868867.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:27.433Z,1478868867.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:27.825Z,1478868867.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:28.221Z,1478868868.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:28.625Z,1478868868.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:29.029Z,1478868869.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:29.438Z,1478868869.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:29.828Z,1478868869.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:30.227Z,1478868870.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:30.637Z,1478868870.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:31.039Z,1478868871.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:31.431Z,1478868871.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:31.840Z,1478868871.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:32.236Z,1478868872.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:32.637Z,1478868872.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:33.037Z,1478868873.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:33.447Z,1478868873.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:33.845Z,1478868873.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:34.245Z,1478868874.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:34.636Z,1478868874.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:35.036Z,1478868875.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:35.436Z,1478868875.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:35.836Z,1478868875.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:36.190Z,1478868876.190 [NAL9602](INFO): SBD MO Status=2, MOMSN=347, MT Status=2, MTMSN=0
2016-11-11T12:54:36.190Z,1478868876.190 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T12:54:36.253Z,1478868876.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:36.733Z,1478868876.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:37.054Z,1478868877.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:37.429Z,1478868877.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:37.861Z,1478868877.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:38.242Z,1478868878.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:38.669Z,1478868878.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:39.072Z,1478868879.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:39.473Z,1478868879.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:39.845Z,1478868879.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:40.266Z,1478868880.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:40.663Z,1478868880.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:41.045Z,1478868881.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:41.444Z,1478868881.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:41.833Z,1478868881.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:42.264Z,1478868882.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:42.632Z,1478868882.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:43.040Z,1478868883.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:43.437Z,1478868883.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:43.847Z,1478868883.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:44.242Z,1478868884.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:44.649Z,1478868884.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:45.046Z,1478868885.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:45.425Z,1478868885.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:45.829Z,1478868885.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:46.225Z,1478868886.225 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:46.225Z,1478868886.225 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 142
2016-11-11T12:54:46.225Z,1478868886.225 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:54:46.252Z,1478868886.252 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:46.252Z,1478868886.252 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 142
2016-11-11T12:54:46.252Z,1478868886.252 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:54:46.254Z,1478868886.254 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:46.254Z,1478868886.254 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 142
2016-11-11T12:54:46.254Z,1478868886.254 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:54:46.289Z,1478868886.289 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:54:46.289Z,1478868886.289 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:54:46.290Z,1478868886.290 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:54:46.683Z,1478868886.683 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:54:46.683Z,1478868886.684 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 142
2016-11-11T12:54:46.684Z,1478868886.684 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:54:46.684Z,1478868886.684 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 142
2016-11-11T12:54:46.685Z,1478868886.685 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:54:46.685Z,1478868886.685 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 142
2016-11-11T12:54:47.034Z,1478868887.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:54:47.036Z,1478868887.036 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:54:47.036Z,1478868887.036 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:54:47.041Z,1478868887.041 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:54:47.042Z,1478868887.042 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:54:47.042Z,1478868887.042 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:54:47.043Z,1478868887.043 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:54:47.043Z,1478868887.043 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:54:47.044Z,1478868887.044 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:54:47.437Z,1478868887.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:47.842Z,1478868887.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:48.238Z,1478868888.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:48.621Z,1478868888.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:49.028Z,1478868889.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:49.430Z,1478868889.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:49.858Z,1478868889.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:50.234Z,1478868890.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:50.638Z,1478868890.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:51.080Z,1478868891.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:51.477Z,1478868891.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:51.835Z,1478868891.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:52.274Z,1478868892.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:52.642Z,1478868892.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:53.090Z,1478868893.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:56.678Z,1478868896.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:56.825Z,1478868896.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:57.174Z,1478868897.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:57.573Z,1478868897.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:57.972Z,1478868897.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:58.419Z,1478868898.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:58.781Z,1478868898.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:59.170Z,1478868899.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:59.578Z,1478868899.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:54:59.977Z,1478868899.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:00.403Z,1478868900.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:00.780Z,1478868900.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:01.181Z,1478868901.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:01.580Z,1478868901.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:01.979Z,1478868901.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:02.413Z,1478868902.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:02.781Z,1478868902.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:03.189Z,1478868903.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:03.578Z,1478868903.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:03.973Z,1478868903.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:04.410Z,1478868904.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:04.776Z,1478868904.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:05.183Z,1478868905.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:05.583Z,1478868905.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:05.975Z,1478868905.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:06.376Z,1478868906.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:06.865Z,1478868906.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:07.182Z,1478868907.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:07.576Z,1478868907.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:07.978Z,1478868907.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:08.376Z,1478868908.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:08.889Z,1478868908.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:09.173Z,1478868909.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:09.609Z,1478868909.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:09.981Z,1478868909.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:10.394Z,1478868910.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:10.809Z,1478868910.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:11.178Z,1478868911.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:11.573Z,1478868911.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:11.978Z,1478868911.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:12.394Z,1478868912.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:12.776Z,1478868912.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:13.179Z,1478868913.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:13.569Z,1478868913.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:13.982Z,1478868913.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:14.382Z,1478868914.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:14.780Z,1478868914.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:15.185Z,1478868915.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:15.570Z,1478868915.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:15.981Z,1478868915.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:16.382Z,1478868916.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:16.777Z,1478868916.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:17.175Z,1478868917.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:17.573Z,1478868917.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:17.977Z,1478868917.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:18.442Z,1478868918.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:18.770Z,1478868918.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:19.178Z,1478868919.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:19.570Z,1478868919.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:19.977Z,1478868919.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:20.376Z,1478868920.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:20.855Z,1478868920.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:21.173Z,1478868921.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:21.569Z,1478868921.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:21.973Z,1478868921.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:22.368Z,1478868922.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:22.869Z,1478868922.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:23.197Z,1478868923.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:23.574Z,1478868923.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:23.982Z,1478868923.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:24.397Z,1478868924.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:24.773Z,1478868924.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:25.205Z,1478868925.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:25.573Z,1478868925.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:26.005Z,1478868926.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:26.389Z,1478868926.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:26.769Z,1478868926.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:27.181Z,1478868927.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:27.577Z,1478868927.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:27.977Z,1478868927.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:28.385Z,1478868928.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:28.762Z,1478868928.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:29.165Z,1478868929.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:29.568Z,1478868929.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:29.981Z,1478868929.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:30.368Z,1478868930.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:30.777Z,1478868930.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:31.174Z,1478868931.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:31.569Z,1478868931.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:31.982Z,1478868931.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:32.337Z,1478868932.337 [NAL9602](INFO): SBD MO Status=2, MOMSN=347, MT Status=2, MTMSN=0
2016-11-11T12:55:32.337Z,1478868932.337 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T12:55:32.441Z,1478868932.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:32.781Z,1478868932.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:33.173Z,1478868933.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:33.573Z,1478868933.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:33.977Z,1478868933.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:34.374Z,1478868934.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:34.815Z,1478868934.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:35.174Z,1478868935.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:35.578Z,1478868935.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:35.978Z,1478868935.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:36.376Z,1478868936.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:36.826Z,1478868936.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:37.193Z,1478868937.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:37.585Z,1478868937.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:38.005Z,1478868938.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:38.394Z,1478868938.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:38.771Z,1478868938.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:39.170Z,1478868939.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:39.607Z,1478868939.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:39.975Z,1478868939.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:40.405Z,1478868940.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:40.807Z,1478868940.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:41.169Z,1478868941.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:41.577Z,1478868941.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:41.979Z,1478868941.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:42.376Z,1478868942.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:42.770Z,1478868942.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:43.179Z,1478868943.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:43.570Z,1478868943.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:43.977Z,1478868943.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:44.380Z,1478868944.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:44.779Z,1478868944.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:45.173Z,1478868945.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:45.577Z,1478868945.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:45.973Z,1478868945.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:46.402Z,1478868946.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:46.781Z,1478868946.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:47.180Z,1478868947.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:47.579Z,1478868947.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:47.985Z,1478868947.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:48.393Z,1478868948.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:48.794Z,1478868948.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:49.161Z,1478868949.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:49.565Z,1478868949.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:49.996Z,1478868949.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:50.377Z,1478868950.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:50.782Z,1478868950.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:51.209Z,1478868951.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:51.589Z,1478868951.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:51.608Z,1478868951.608 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T12:50:51.6Z
2016-11-11T12:55:51.608Z,1478868951.608 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T12:55:51.608Z,1478868951.608 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T12:55:51.969Z,1478868951.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:52.869Z,1478868952.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:53.007Z,1478868953.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:56.445Z,1478868956.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:56.492Z,1478868956.492 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0188.lzma
2016-11-11T12:55:56.574Z,1478868956.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:56.985Z,1478868956.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:57.293Z,1478868957.293 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0188.lzma.bak
2016-11-11T12:55:57.294Z,1478868957.293 [DataOverHttps](INFO): SBD MOMSN=4555423
2016-11-11T12:55:57.346Z,1478868957.346 [PNI_TCM](ERROR): CRC does not match. Expected:0x17092 got:0x46088
2016-11-11T12:55:57.394Z,1478868957.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:59.041Z,1478868959.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:55:59.062Z,1478868959.062 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T12:55:59.184Z,1478868959.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:02.548Z,1478868962.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:02.723Z,1478868962.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:03.033Z,1478868963.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:03.429Z,1478868963.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:03.839Z,1478868963.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:04.242Z,1478868964.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:07.673Z,1478868967.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:07.762Z,1478868967.762 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20161111T044527/Express0189.lzma
2016-11-11T12:56:07.901Z,1478868967.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:08.321Z,1478868968.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:08.556Z,1478868968.556 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0189.lzma.bak
2016-11-11T12:56:08.556Z,1478868968.556 [DataOverHttps](INFO): SBD MOMSN=4555425
2016-11-11T12:56:08.633Z,1478868968.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:09.902Z,1478868969.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:09.919Z,1478868969.918 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T12:56:09.919Z,1478868969.919 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T12:56:09.919Z,1478868969.919 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T12:56:10.037Z,1478868970.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:13.457Z,1478868973.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:13.577Z,1478868973.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:13.993Z,1478868973.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:14.398Z,1478868974.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:14.759Z,1478868974.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:15.165Z,1478868975.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:15.553Z,1478868975.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:15.960Z,1478868975.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:16.353Z,1478868976.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:16.757Z,1478868976.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:17.153Z,1478868977.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:17.556Z,1478868977.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:17.960Z,1478868977.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:18.362Z,1478868978.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:18.769Z,1478868978.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:19.203Z,1478868979.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:19.553Z,1478868979.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:19.959Z,1478868979.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:20.360Z,1478868980.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:20.754Z,1478868980.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:21.154Z,1478868981.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:21.555Z,1478868981.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:21.961Z,1478868981.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:22.360Z,1478868982.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:22.755Z,1478868982.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:23.153Z,1478868983.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:23.553Z,1478868983.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:23.961Z,1478868983.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:24.376Z,1478868984.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:24.781Z,1478868984.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:25.165Z,1478868985.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:25.555Z,1478868985.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:25.953Z,1478868985.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:26.389Z,1478868986.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:26.713Z,1478868986.713 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T12:56:26.745Z,1478868986.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:27.149Z,1478868987.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:27.574Z,1478868987.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:27.948Z,1478868987.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:28.377Z,1478868988.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:28.774Z,1478868988.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:29.148Z,1478868989.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:29.553Z,1478868989.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:29.949Z,1478868989.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:30.353Z,1478868990.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:30.749Z,1478868990.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:31.153Z,1478868991.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:31.603Z,1478868991.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:31.957Z,1478868991.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:32.316Z,1478868992.316 [NAL9602](INFO): Powering down
2016-11-11T12:56:32.350Z,1478868992.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:32.749Z,1478868992.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:33.153Z,1478868993.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:33.544Z,1478868993.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:33.948Z,1478868993.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:34.349Z,1478868994.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:34.753Z,1478868994.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:35.144Z,1478868995.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:35.553Z,1478868995.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:35.944Z,1478868995.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:36.357Z,1478868996.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:36.811Z,1478868996.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:37.153Z,1478868997.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:37.553Z,1478868997.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:37.949Z,1478868997.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:38.357Z,1478868998.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:38.744Z,1478868998.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:39.153Z,1478868999.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:39.549Z,1478868999.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:39.973Z,1478868999.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:40.377Z,1478869000.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:40.748Z,1478869000.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:41.243Z,1478869001.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:41.577Z,1478869001.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:41.948Z,1478869001.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:42.377Z,1478869002.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:42.781Z,1478869002.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:43.148Z,1478869003.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:43.553Z,1478869003.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:43.954Z,1478869003.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:44.353Z,1478869004.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:44.745Z,1478869004.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:45.158Z,1478869005.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:45.554Z,1478869005.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:45.958Z,1478869005.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:46.357Z,1478869006.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:46.757Z,1478869006.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:47.153Z,1478869007.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:47.563Z,1478869007.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:47.953Z,1478869007.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:48.353Z,1478869008.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:48.753Z,1478869008.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:49.157Z,1478869009.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:49.552Z,1478869009.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:49.955Z,1478869009.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:50.354Z,1478869010.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:50.752Z,1478869010.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:51.159Z,1478869011.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:51.561Z,1478869011.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:51.961Z,1478869011.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:52.365Z,1478869012.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:52.765Z,1478869012.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:53.153Z,1478869013.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:53.616Z,1478869013.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:53.957Z,1478869013.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:54.356Z,1478869014.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:54.805Z,1478869014.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:55.151Z,1478869015.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:55.551Z,1478869015.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:55.992Z,1478869015.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:56.365Z,1478869016.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:56.777Z,1478869016.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:57.177Z,1478869017.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:57.549Z,1478869017.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:57.952Z,1478869017.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:58.351Z,1478869018.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:58.753Z,1478869018.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:59.160Z,1478869019.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:59.557Z,1478869019.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:56:59.957Z,1478869019.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:00.353Z,1478869020.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:00.761Z,1478869020.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:01.162Z,1478869021.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:01.561Z,1478869021.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:01.964Z,1478869021.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:02.365Z,1478869022.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:02.754Z,1478869022.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:03.157Z,1478869023.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:03.565Z,1478869023.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:03.961Z,1478869023.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:04.369Z,1478869024.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:04.766Z,1478869024.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:05.144Z,1478869025.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:05.548Z,1478869025.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:05.952Z,1478869025.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:06.352Z,1478869026.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:06.757Z,1478869026.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:07.161Z,1478869027.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:07.557Z,1478869027.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:07.986Z,1478869027.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:08.364Z,1478869028.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:08.781Z,1478869028.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:09.170Z,1478869029.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:09.545Z,1478869029.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:09.982Z,1478869029.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:10.373Z,1478869030.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:13.717Z,1478869033.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:13.838Z,1478869033.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:14.232Z,1478869034.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:14.646Z,1478869034.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:14.997Z,1478869034.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:15.400Z,1478869035.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:15.798Z,1478869035.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:16.200Z,1478869036.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:16.601Z,1478869036.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:17.001Z,1478869037.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:17.401Z,1478869037.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:17.800Z,1478869037.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:18.200Z,1478869038.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:18.604Z,1478869038.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:18.000Z,1478869039.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:19.405Z,1478869039.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:19.821Z,1478869039.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:20.215Z,1478869040.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:20.601Z,1478869040.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:20.993Z,1478869040.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:21.399Z,1478869041.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:21.801Z,1478869041.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:22.199Z,1478869042.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:22.602Z,1478869042.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:23.005Z,1478869043.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:23.417Z,1478869043.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:23.804Z,1478869043.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:24.268Z,1478869044.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:24.610Z,1478869044.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:25.077Z,1478869045.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:25.415Z,1478869045.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:25.805Z,1478869045.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:26.225Z,1478869046.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:26.612Z,1478869046.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:27.005Z,1478869047.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:27.431Z,1478869047.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:27.802Z,1478869047.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:28.243Z,1478869048.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:28.654Z,1478869048.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:29.024Z,1478869049.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:29.414Z,1478869049.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:29.805Z,1478869049.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:30.218Z,1478869050.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:30.609Z,1478869050.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:31.025Z,1478869051.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:31.418Z,1478869051.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:31.814Z,1478869051.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:32.212Z,1478869052.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:32.606Z,1478869052.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:32.997Z,1478869052.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:33.413Z,1478869053.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:33.820Z,1478869053.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:34.218Z,1478869054.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:34.593Z,1478869054.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:35.006Z,1478869055.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:35.397Z,1478869055.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:35.815Z,1478869055.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:36.249Z,1478869056.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:36.613Z,1478869056.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:36.985Z,1478869056.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:37.424Z,1478869057.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:37.809Z,1478869057.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:38.268Z,1478869058.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:38.602Z,1478869058.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:39.023Z,1478869059.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:39.453Z,1478869059.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:39.808Z,1478869059.808 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T12:57:39.808Z,1478869059.808 [BPC1] Data Fault, FailCount= 1
2016-11-11T12:57:39.808Z,1478869059.808 [BPC1](ERROR): Data Fault
2016-11-11T12:57:39.829Z,1478869059.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:39.866Z,1478869059.866 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T12:57:40.245Z,1478869060.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:40.620Z,1478869060.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:41.009Z,1478869061.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:41.073Z,1478869061.073 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:57:41.074Z,1478869061.074 [BPC1] No Fault, FailCount= 1
2016-11-11T12:57:41.486Z,1478869061.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:41.853Z,1478869061.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:42.222Z,1478869062.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:42.626Z,1478869062.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:43.019Z,1478869063.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:43.394Z,1478869063.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:43.806Z,1478869063.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:44.205Z,1478869064.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:44.602Z,1478869064.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:45.006Z,1478869065.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:45.408Z,1478869065.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:45.812Z,1478869065.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:46.209Z,1478869066.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:46.610Z,1478869066.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:47.011Z,1478869067.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:47.412Z,1478869067.412 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:47.412Z,1478869067.412 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 143
2016-11-11T12:57:47.413Z,1478869067.413 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T12:57:47.436Z,1478869067.436 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:47.436Z,1478869067.436 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 143
2016-11-11T12:57:47.436Z,1478869067.436 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T12:57:47.438Z,1478869067.438 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:47.438Z,1478869067.438 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 143
2016-11-11T12:57:47.438Z,1478869067.438 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T12:57:47.477Z,1478869067.477 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T12:57:47.477Z,1478869067.477 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T12:57:47.478Z,1478869067.478 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T12:57:47.849Z,1478869067.849 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T12:57:47.849Z,1478869067.849 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 143
2016-11-11T12:57:47.850Z,1478869067.850 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T12:57:47.850Z,1478869067.850 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 143
2016-11-11T12:57:47.850Z,1478869067.851 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T12:57:47.851Z,1478869067.851 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 143
2016-11-11T12:57:48.209Z,1478869068.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T12:57:48.209Z,1478869068.209 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:57:48.210Z,1478869068.210 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:57:48.222Z,1478869068.222 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T12:57:48.222Z,1478869068.222 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:57:48.222Z,1478869068.222 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:57:48.231Z,1478869068.231 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T12:57:48.232Z,1478869068.232 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T12:57:48.232Z,1478869068.232 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T12:57:48.622Z,1478869068.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:49.022Z,1478869069.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:49.396Z,1478869069.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:49.801Z,1478869069.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:50.205Z,1478869070.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:50.609Z,1478869070.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:51.022Z,1478869071.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:51.413Z,1478869071.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:51.823Z,1478869071.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:52.305Z,1478869072.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:52.613Z,1478869072.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:53.045Z,1478869073.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:53.425Z,1478869073.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:53.822Z,1478869073.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:54.197Z,1478869074.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:54.629Z,1478869074.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:54.989Z,1478869074.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:55.406Z,1478869075.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:55.817Z,1478869075.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:56.183Z,1478869076.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:56.589Z,1478869076.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:56.992Z,1478869076.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:57.385Z,1478869077.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:57.784Z,1478869077.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:58.189Z,1478869078.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:58.585Z,1478869078.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:58.980Z,1478869078.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:59.384Z,1478869079.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:57:59.789Z,1478869079.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:00.184Z,1478869080.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:00.580Z,1478869080.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:00.983Z,1478869080.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:01.385Z,1478869081.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:01.789Z,1478869081.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:02.196Z,1478869082.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:02.589Z,1478869082.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:03.032Z,1478869083.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:03.383Z,1478869083.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:03.789Z,1478869083.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:04.189Z,1478869084.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:04.589Z,1478869084.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:04.985Z,1478869084.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:05.389Z,1478869085.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:05.785Z,1478869085.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:06.189Z,1478869086.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:06.669Z,1478869086.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:06.983Z,1478869086.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:07.389Z,1478869087.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:07.809Z,1478869087.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:08.189Z,1478869088.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:08.606Z,1478869088.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:08.989Z,1478869088.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:09.417Z,1478869089.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:09.806Z,1478869089.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:10.185Z,1478869090.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:10.584Z,1478869090.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:13.984Z,1478869093.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:14.105Z,1478869094.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:14.469Z,1478869094.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:14.865Z,1478869094.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:15.286Z,1478869095.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:15.669Z,1478869095.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:16.064Z,1478869096.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:16.464Z,1478869096.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:16.863Z,1478869096.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:17.269Z,1478869097.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:17.664Z,1478869097.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:18.124Z,1478869098.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:18.485Z,1478869098.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:18.870Z,1478869098.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:19.275Z,1478869099.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:19.660Z,1478869099.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:20.116Z,1478869100.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:20.473Z,1478869100.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:20.871Z,1478869100.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:21.273Z,1478869101.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:21.673Z,1478869101.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:22.093Z,1478869102.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:22.498Z,1478869102.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:22.873Z,1478869102.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:23.289Z,1478869103.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:23.681Z,1478869103.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:24.090Z,1478869104.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:24.540Z,1478869104.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:24.865Z,1478869104.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:25.268Z,1478869105.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:25.666Z,1478869105.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:26.085Z,1478869106.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:26.469Z,1478869106.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:26.878Z,1478869106.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:27.269Z,1478869107.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:27.677Z,1478869107.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:28.077Z,1478869108.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:28.470Z,1478869108.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:28.876Z,1478869108.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:29.278Z,1478869109.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:29.668Z,1478869109.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:30.075Z,1478869110.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:30.478Z,1478869110.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:30.875Z,1478869110.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:31.273Z,1478869111.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:31.669Z,1478869111.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:32.076Z,1478869112.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:32.477Z,1478869112.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:32.877Z,1478869112.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:33.285Z,1478869113.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:33.669Z,1478869113.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:34.149Z,1478869114.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:34.476Z,1478869114.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:34.867Z,1478869114.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:35.277Z,1478869115.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:35.678Z,1478869115.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:36.073Z,1478869116.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:36.569Z,1478869116.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:36.913Z,1478869116.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:37.270Z,1478869117.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:37.698Z,1478869117.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:38.073Z,1478869118.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:38.527Z,1478869118.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:38.897Z,1478869118.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:39.280Z,1478869119.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:39.680Z,1478869119.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:40.080Z,1478869120.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:40.481Z,1478869120.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:40.864Z,1478869120.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:41.265Z,1478869121.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:41.668Z,1478869121.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:42.097Z,1478869122.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:42.464Z,1478869122.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:42.867Z,1478869122.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:43.267Z,1478869123.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:43.666Z,1478869123.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:44.085Z,1478869124.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:44.472Z,1478869124.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:44.873Z,1478869124.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:45.278Z,1478869125.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:45.673Z,1478869125.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:46.073Z,1478869126.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:46.480Z,1478869126.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:46.877Z,1478869126.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:47.271Z,1478869127.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:47.676Z,1478869127.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:48.116Z,1478869128.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:48.481Z,1478869128.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:48.877Z,1478869128.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:49.281Z,1478869129.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:49.682Z,1478869129.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:50.082Z,1478869130.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:50.482Z,1478869130.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:50.905Z,1478869130.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:51.305Z,1478869131.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:51.668Z,1478869131.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:52.101Z,1478869132.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:52.504Z,1478869132.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:52.902Z,1478869132.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:53.273Z,1478869133.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:53.706Z,1478869133.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:54.070Z,1478869134.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:54.472Z,1478869134.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:54.892Z,1478869134.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:55.268Z,1478869135.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:55.678Z,1478869135.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:56.068Z,1478869136.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:56.475Z,1478869136.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:56.878Z,1478869136.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:57.269Z,1478869137.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:57.677Z,1478869137.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:58.076Z,1478869138.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:58.468Z,1478869138.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:58.873Z,1478869138.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:59.279Z,1478869139.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:58:59.670Z,1478869139.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:00.075Z,1478869140.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:00.478Z,1478869140.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:00.870Z,1478869140.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:01.283Z,1478869141.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:01.673Z,1478869141.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:02.082Z,1478869142.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:02.474Z,1478869142.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:02.870Z,1478869142.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:03.274Z,1478869143.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:03.674Z,1478869143.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:04.084Z,1478869144.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:04.474Z,1478869144.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:04.879Z,1478869144.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:05.281Z,1478869145.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:05.717Z,1478869145.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:06.085Z,1478869146.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:06.497Z,1478869146.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:06.866Z,1478869146.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:07.295Z,1478869147.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:07.697Z,1478869147.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:08.065Z,1478869148.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:08.468Z,1478869148.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:08.867Z,1478869148.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:09.266Z,1478869149.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:09.674Z,1478869149.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:10.076Z,1478869150.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:10.470Z,1478869150.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:10.880Z,1478869150.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:14.372Z,1478869154.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:14.525Z,1478869154.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:14.889Z,1478869154.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:15.289Z,1478869155.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:15.687Z,1478869155.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:16.095Z,1478869156.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:16.493Z,1478869156.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:16.893Z,1478869156.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:17.279Z,1478869157.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:17.676Z,1478869157.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:18.109Z,1478869158.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:18.488Z,1478869158.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:18.889Z,1478869158.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:19.333Z,1478869159.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:19.725Z,1478869159.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:20.094Z,1478869160.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:20.526Z,1478869160.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:20.897Z,1478869160.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:21.310Z,1478869161.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:21.736Z,1478869161.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:22.089Z,1478869162.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:22.501Z,1478869162.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:22.881Z,1478869162.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:23.281Z,1478869163.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:23.685Z,1478869163.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:24.093Z,1478869164.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:24.490Z,1478869164.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:24.883Z,1478869164.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:25.288Z,1478869165.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:25.683Z,1478869165.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:26.097Z,1478869166.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:26.495Z,1478869166.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:26.889Z,1478869166.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:27.289Z,1478869167.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:27.685Z,1478869167.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:28.101Z,1478869168.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:28.481Z,1478869168.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:28.884Z,1478869168.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:29.284Z,1478869169.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:29.689Z,1478869169.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:30.089Z,1478869170.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:30.492Z,1478869170.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:30.890Z,1478869170.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:31.284Z,1478869171.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:31.692Z,1478869171.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:32.091Z,1478869172.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:32.497Z,1478869172.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:32.895Z,1478869172.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:33.318Z,1478869173.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:33.681Z,1478869173.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:34.109Z,1478869174.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:34.476Z,1478869174.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:34.884Z,1478869174.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:35.326Z,1478869175.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:35.683Z,1478869175.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:36.118Z,1478869176.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:36.511Z,1478869176.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:36.889Z,1478869176.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:37.283Z,1478869177.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:37.689Z,1478869177.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:38.097Z,1478869178.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:38.486Z,1478869178.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:38.893Z,1478869178.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:39.285Z,1478869179.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:39.688Z,1478869179.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:40.097Z,1478869180.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:40.496Z,1478869180.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:40.888Z,1478869180.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:41.303Z,1478869181.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:41.676Z,1478869181.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:42.104Z,1478869182.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:42.481Z,1478869182.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:42.876Z,1478869182.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:43.276Z,1478869183.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:43.683Z,1478869183.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:44.088Z,1478869184.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:44.483Z,1478869184.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:44.883Z,1478869184.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:45.282Z,1478869185.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:45.687Z,1478869185.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:46.087Z,1478869186.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:46.501Z,1478869186.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:46.889Z,1478869186.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:47.292Z,1478869187.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:47.692Z,1478869187.691 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T12:59:47.692Z,1478869187.692 [BPC1] Data Fault, FailCount= 1
2016-11-11T12:59:47.692Z,1478869187.692 [BPC1](ERROR): Data Fault
2016-11-11T12:59:47.710Z,1478869187.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:47.756Z,1478869187.756 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T12:59:48.093Z,1478869188.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:48.499Z,1478869188.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:48.900Z,1478869188.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:48.921Z,1478869188.921 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T12:59:48.921Z,1478869188.921 [BPC1] No Fault, FailCount= 1
2016-11-11T12:59:49.350Z,1478869189.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:49.709Z,1478869189.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:50.085Z,1478869190.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:50.480Z,1478869190.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:50.881Z,1478869190.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:51.283Z,1478869191.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:51.683Z,1478869191.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:52.088Z,1478869192.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:52.482Z,1478869192.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:52.884Z,1478869192.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:53.291Z,1478869193.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:53.694Z,1478869193.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:54.092Z,1478869194.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:54.493Z,1478869194.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:54.889Z,1478869194.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:55.288Z,1478869195.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:55.696Z,1478869195.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:56.094Z,1478869196.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:56.484Z,1478869196.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:56.900Z,1478869196.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:57.096Z,1478869197.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:59:57.301Z,1478869197.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:57.680Z,1478869197.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:57.893Z,1478869197.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:59:58.082Z,1478869198.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:58.332Z,1478869198.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:59:58.489Z,1478869198.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:58.882Z,1478869198.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:59.128Z,1478869199.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T12:59:59.294Z,1478869199.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:59.683Z,1478869199.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T12:59:59.924Z,1478869199.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:00:00.087Z,1478869200.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:00.497Z,1478869200.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:00.692Z,1478869200.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:00:00.893Z,1478869200.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:01.322Z,1478869201.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:01.488Z,1478869201.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:00:01.698Z,1478869201.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:02.089Z,1478869202.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:02.289Z,1478869202.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:00:02.485Z,1478869202.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:02.700Z,1478869202.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:00:02.934Z,1478869202.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:03.297Z,1478869203.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:03.496Z,1478869203.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:00:03.712Z,1478869203.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:04.109Z,1478869204.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:04.216Z,1478869204.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:00:04.496Z,1478869204.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:04.892Z,1478869204.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:05.298Z,1478869205.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:05.703Z,1478869205.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:06.087Z,1478869206.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:06.493Z,1478869206.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:06.883Z,1478869206.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:07.285Z,1478869207.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:07.685Z,1478869207.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:08.097Z,1478869208.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:08.497Z,1478869208.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:08.892Z,1478869208.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:09.294Z,1478869209.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:09.692Z,1478869209.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:10.096Z,1478869210.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:10.495Z,1478869210.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:10.896Z,1478869210.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:14.354Z,1478869214.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:14.488Z,1478869214.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:14.856Z,1478869214.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:15.261Z,1478869215.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:15.702Z,1478869215.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:16.088Z,1478869216.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:16.464Z,1478869216.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:16.883Z,1478869216.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:17.256Z,1478869217.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:17.681Z,1478869217.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:18.089Z,1478869218.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:18.452Z,1478869218.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:18.848Z,1478869218.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:19.250Z,1478869219.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:19.650Z,1478869219.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:20.059Z,1478869220.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:20.451Z,1478869220.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:20.861Z,1478869220.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:21.262Z,1478869221.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:21.652Z,1478869221.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:22.061Z,1478869222.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:22.465Z,1478869222.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:22.854Z,1478869222.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:23.257Z,1478869223.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:23.665Z,1478869223.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:24.052Z,1478869224.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:24.460Z,1478869224.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:24.854Z,1478869224.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:25.253Z,1478869225.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:25.661Z,1478869225.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:26.064Z,1478869226.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:26.467Z,1478869226.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:26.863Z,1478869226.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:27.092Z,1478869227.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:00:27.257Z,1478869227.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:27.671Z,1478869227.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:27.888Z,1478869227.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:00:28.065Z,1478869228.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:28.484Z,1478869228.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:28.852Z,1478869228.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:29.250Z,1478869229.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:29.663Z,1478869229.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:30.097Z,1478869230.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:30.505Z,1478869230.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:30.854Z,1478869230.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:31.300Z,1478869231.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:31.660Z,1478869231.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:32.099Z,1478869232.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:32.500Z,1478869232.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:32.870Z,1478869232.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:33.261Z,1478869233.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:33.658Z,1478869233.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:34.065Z,1478869234.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:34.458Z,1478869234.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:34.861Z,1478869234.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:35.262Z,1478869235.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:35.668Z,1478869235.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:36.068Z,1478869236.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:36.453Z,1478869236.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:36.853Z,1478869236.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:37.250Z,1478869237.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:37.655Z,1478869237.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:38.052Z,1478869238.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:38.451Z,1478869238.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:38.859Z,1478869238.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:39.258Z,1478869239.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:39.678Z,1478869239.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:40.067Z,1478869240.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:40.467Z,1478869240.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:40.865Z,1478869240.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:41.260Z,1478869241.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:41.672Z,1478869241.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:42.062Z,1478869242.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:42.471Z,1478869242.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:42.867Z,1478869242.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:43.246Z,1478869243.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:43.653Z,1478869243.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:44.049Z,1478869244.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:44.509Z,1478869244.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:44.860Z,1478869244.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:45.257Z,1478869245.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:45.693Z,1478869245.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:46.070Z,1478869246.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:46.497Z,1478869246.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:46.882Z,1478869246.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:47.257Z,1478869247.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:47.673Z,1478869247.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:48.073Z,1478869248.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:48.463Z,1478869248.463 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:48.464Z,1478869248.464 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 144
2016-11-11T13:00:48.464Z,1478869248.464 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:00:48.479Z,1478869248.480 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:48.480Z,1478869248.480 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 144
2016-11-11T13:00:48.480Z,1478869248.480 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:00:48.482Z,1478869248.482 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:48.482Z,1478869248.482 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 144
2016-11-11T13:00:48.482Z,1478869248.482 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:00:48.505Z,1478869248.505 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:00:48.506Z,1478869248.506 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:00:48.506Z,1478869248.506 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:00:48.897Z,1478869248.897 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:00:48.897Z,1478869248.897 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 144
2016-11-11T13:00:48.898Z,1478869248.898 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:00:48.898Z,1478869248.898 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 144
2016-11-11T13:00:48.899Z,1478869248.899 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:00:48.899Z,1478869248.899 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 144
2016-11-11T13:00:49.268Z,1478869249.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:00:49.268Z,1478869249.268 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:00:49.269Z,1478869249.269 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:00:49.273Z,1478869249.273 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:00:49.274Z,1478869249.274 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:00:49.274Z,1478869249.274 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:00:49.275Z,1478869249.274 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:00:49.303Z,1478869249.303 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:00:49.304Z,1478869249.304 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:00:49.669Z,1478869249.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:50.047Z,1478869250.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:50.449Z,1478869250.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:50.881Z,1478869250.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:51.254Z,1478869251.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:51.654Z,1478869251.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:52.065Z,1478869252.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:52.457Z,1478869252.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:52.865Z,1478869252.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:53.257Z,1478869253.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:53.659Z,1478869253.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:54.065Z,1478869254.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:54.461Z,1478869254.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:54.859Z,1478869254.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:55.261Z,1478869255.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:55.665Z,1478869255.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:56.064Z,1478869256.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:56.462Z,1478869256.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:56.868Z,1478869256.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:57.269Z,1478869257.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:57.642Z,1478869257.642 [PNI_TCM](ERROR): CRC does not match. Expected:0x35216 got:0x41240
2016-11-11T13:00:57.673Z,1478869257.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:58.039Z,1478869258.039 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T13:00:58.039Z,1478869258.039 [BPC1] Data Fault, FailCount= 1
2016-11-11T13:00:58.039Z,1478869258.039 [BPC1](ERROR): Data Fault
2016-11-11T13:00:58.071Z,1478869258.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:58.106Z,1478869258.106 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T13:00:58.457Z,1478869258.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:58.869Z,1478869258.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:59.245Z,1478869259.245 [PNI_TCM](ERROR): CRC does not match. Expected:0x41226 got:0x9479
2016-11-11T13:00:59.269Z,1478869259.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:00:59.311Z,1478869259.311 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:00:59.311Z,1478869259.311 [BPC1] No Fault, FailCount= 1
2016-11-11T13:00:59.742Z,1478869259.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:00.052Z,1478869260.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:00.497Z,1478869260.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:00.854Z,1478869260.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:01.253Z,1478869261.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:01.654Z,1478869261.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:02.069Z,1478869262.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:02.438Z,1478869262.438 [PNI_TCM](ERROR): CRC does not match. Expected:0x790 got:0x17015
2016-11-11T13:01:02.472Z,1478869262.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:02.867Z,1478869262.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:03.244Z,1478869263.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:03.663Z,1478869263.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:04.058Z,1478869264.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:04.452Z,1478869264.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:04.855Z,1478869264.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:05.255Z,1478869265.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:05.661Z,1478869265.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:06.062Z,1478869266.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:06.450Z,1478869266.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:06.855Z,1478869266.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:07.257Z,1478869267.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:07.657Z,1478869267.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:08.059Z,1478869268.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:08.455Z,1478869268.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:08.861Z,1478869268.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:09.271Z,1478869269.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:09.669Z,1478869269.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:10.073Z,1478869270.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:10.090Z,1478869270.090 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T13:01:10.090Z,1478869270.090 [Default:CheckIn:C.Wait] Stopped
2016-11-11T13:01:10.090Z,1478869270.090 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T13:01:10.090Z,1478869270.091 [Default:CheckIn:D] Running Loop=1
2016-11-11T13:01:10.456Z,1478869270.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:10.489Z,1478869270.489 [Default:CheckIn:D] Stopped
2016-11-11T13:01:10.489Z,1478869270.489 [Default:CheckIn:E] Running Loop=1
2016-11-11T13:01:10.852Z,1478869270.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:10.861Z,1478869270.861 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 491.152962 min 
2016-11-11T13:01:10.862Z,1478869270.862 [Default:CheckIn:E] Stopped
2016-11-11T13:01:10.862Z,1478869270.862 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T13:01:10.862Z,1478869270.862 [Default:CheckIn] Stopped
2016-11-11T13:01:10.862Z,1478869270.862 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T13:01:10.862Z,1478869270.862 [Default:CheckIn](INFO): Running loop #48
2016-11-11T13:01:10.862Z,1478869270.862 [Default:CheckIn] Running Loop=48
2016-11-11T13:01:10.862Z,1478869270.862 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T13:01:10.863Z,1478869270.862 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T13:01:11.252Z,1478869271.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:14.644Z,1478869274.644 [NAL9602](INFO): Powering up
2016-11-11T13:01:14.757Z,1478869274.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:14.889Z,1478869274.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:15.256Z,1478869275.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:15.728Z,1478869275.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:16.051Z,1478869276.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:16.481Z,1478869276.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:16.889Z,1478869276.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:17.251Z,1478869277.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:17.651Z,1478869277.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:18.065Z,1478869278.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:18.462Z,1478869278.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:18.855Z,1478869278.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:19.261Z,1478869279.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:19.677Z,1478869279.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:20.061Z,1478869280.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:20.461Z,1478869280.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:20.864Z,1478869280.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:21.273Z,1478869281.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:21.661Z,1478869281.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:22.075Z,1478869282.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:22.465Z,1478869282.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:22.862Z,1478869282.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:23.273Z,1478869283.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:23.664Z,1478869283.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:24.049Z,1478869284.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:24.450Z,1478869284.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:24.851Z,1478869284.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:25.265Z,1478869285.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:25.617Z,1478869285.617 [NAL9602](INFO): NAL9602 initialized
2016-11-11T13:01:25.660Z,1478869285.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:26.063Z,1478869286.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:26.413Z,1478869286.413 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T13:01:26.413Z,1478869286.413 [NAL9602] Data Fault, FailCount= 2
2016-11-11T13:01:26.413Z,1478869286.413 [NAL9602](ERROR): Data Fault
2016-11-11T13:01:26.474Z,1478869286.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:26.506Z,1478869286.506 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T13:01:26.817Z,1478869286.817 [NAL9602](INFO): Powering down
2016-11-11T13:01:26.873Z,1478869286.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:27.251Z,1478869287.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:27.776Z,1478869287.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:27.812Z,1478869287.812 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T13:01:27.812Z,1478869287.812 [NAL9602] No Fault, FailCount= 2
2016-11-11T13:01:28.055Z,1478869288.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:28.461Z,1478869288.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:28.857Z,1478869288.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:29.277Z,1478869289.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:29.724Z,1478869289.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:30.081Z,1478869290.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:30.444Z,1478869290.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:30.875Z,1478869290.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:30.904Z,1478869290.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:31.282Z,1478869291.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:31.693Z,1478869291.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:31.701Z,1478869291.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:32.013Z,1478869292.013 [NAL9602](INFO): Powering up NAL9602
2016-11-11T13:01:32.064Z,1478869292.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:32.112Z,1478869292.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:32.453Z,1478869292.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:32.851Z,1478869292.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:32.908Z,1478869292.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:33.257Z,1478869293.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:33.705Z,1478869293.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:33.722Z,1478869293.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:34.059Z,1478869294.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:34.116Z,1478869294.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:34.460Z,1478869294.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:34.862Z,1478869294.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:34.912Z,1478869294.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:35.253Z,1478869295.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:35.660Z,1478869295.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:35.708Z,1478869295.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:36.061Z,1478869296.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:36.180Z,1478869296.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:36.454Z,1478869296.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:36.860Z,1478869296.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:36.976Z,1478869296.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:37.262Z,1478869297.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:37.653Z,1478869297.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:37.772Z,1478869297.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:38.064Z,1478869298.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:38.464Z,1478869298.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:38.564Z,1478869298.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:38.863Z,1478869298.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:39.264Z,1478869299.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:39.360Z,1478869299.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:39.664Z,1478869299.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:40.072Z,1478869300.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:40.156Z,1478869300.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:40.458Z,1478869300.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:40.568Z,1478869300.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:40.857Z,1478869300.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:41.255Z,1478869301.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:41.364Z,1478869301.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:41.692Z,1478869301.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:42.089Z,1478869302.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:42.104Z,1478869302.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:42.450Z,1478869302.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:42.858Z,1478869302.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:42.900Z,1478869302.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:43.213Z,1478869303.213 [NAL9602](INFO): NAL9602 initialized
2016-11-11T13:01:43.286Z,1478869303.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:43.697Z,1478869303.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:43.747Z,1478869303.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:44.069Z,1478869304.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:44.108Z,1478869304.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:44.497Z,1478869304.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:44.866Z,1478869304.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:44.904Z,1478869304.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:45.281Z,1478869305.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:45.700Z,1478869305.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:45.730Z,1478869305.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:46.073Z,1478869306.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:46.108Z,1478869306.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:46.475Z,1478869306.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:46.876Z,1478869306.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:46.904Z,1478869306.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:47.253Z,1478869307.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:47.700Z,1478869307.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:47.711Z,1478869307.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:48.049Z,1478869308.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:48.108Z,1478869308.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:48.453Z,1478869308.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:48.853Z,1478869308.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:48.904Z,1478869308.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:49.253Z,1478869309.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:49.652Z,1478869309.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:49.700Z,1478869309.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:50.056Z,1478869310.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:50.160Z,1478869310.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:50.465Z,1478869310.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:50.861Z,1478869310.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:50.956Z,1478869310.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:51.261Z,1478869311.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:51.663Z,1478869311.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:51.752Z,1478869311.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:52.056Z,1478869312.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:52.462Z,1478869312.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:52.520Z,1478869312.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:52.861Z,1478869312.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:53.254Z,1478869313.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:53.316Z,1478869313.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:53.661Z,1478869313.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:54.066Z,1478869314.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:54.112Z,1478869314.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:54.476Z,1478869314.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:54.524Z,1478869314.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:54.876Z,1478869314.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:55.271Z,1478869315.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:55.320Z,1478869315.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:55.726Z,1478869315.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:56.045Z,1478869316.045 [BPC1](ERROR): Failed to parse message.
2016-11-11T13:01:56.045Z,1478869316.045 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T13:01:56.045Z,1478869316.046 [BPC1] Data Fault, FailCount= 1
2016-11-11T13:01:56.046Z,1478869316.046 [BPC1](ERROR): Data Fault
2016-11-11T13:01:56.048Z,1478869316.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:56.055Z,1478869316.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:56.108Z,1478869316.109 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T13:01:56.452Z,1478869316.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:56.844Z,1478869316.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:56.865Z,1478869316.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:57.253Z,1478869317.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:57.288Z,1478869317.288 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:01:57.288Z,1478869317.288 [BPC1] No Fault, FailCount= 1
2016-11-11T13:01:57.641Z,1478869317.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:57.781Z,1478869317.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:58.082Z,1478869318.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:58.092Z,1478869318.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:58.465Z,1478869318.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:58.849Z,1478869318.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:58.888Z,1478869318.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:59.271Z,1478869319.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:01:59.684Z,1478869319.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:01:59.738Z,1478869319.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:00.053Z,1478869320.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:00.092Z,1478869320.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:00.452Z,1478869320.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:00.853Z,1478869320.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:00.888Z,1478869320.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:01.260Z,1478869321.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:01.684Z,1478869321.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:01.703Z,1478869321.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:02.069Z,1478869322.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:02.092Z,1478869322.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:02.466Z,1478869322.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:02.868Z,1478869322.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:02.888Z,1478869322.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:03.273Z,1478869323.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:03.649Z,1478869323.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:03.684Z,1478869323.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:04.051Z,1478869324.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:04.156Z,1478869324.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:04.462Z,1478869324.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:04.856Z,1478869324.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:04.952Z,1478869324.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:05.257Z,1478869325.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:05.661Z,1478869325.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:05.748Z,1478869325.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:06.045Z,1478869326.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:06.450Z,1478869326.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:06.508Z,1478869326.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:06.861Z,1478869326.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:07.252Z,1478869327.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:07.305Z,1478869327.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:07.655Z,1478869327.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:08.089Z,1478869328.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:08.101Z,1478869328.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:08.469Z,1478869328.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:08.512Z,1478869328.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:08.877Z,1478869328.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:09.255Z,1478869329.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:09.308Z,1478869329.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:09.705Z,1478869329.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:10.032Z,1478869330.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:10.086Z,1478869330.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:10.469Z,1478869330.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:10.828Z,1478869330.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:10.893Z,1478869330.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:11.262Z,1478869331.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:11.624Z,1478869331.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:12.044Z,1478869332.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:12.840Z,1478869332.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:13.637Z,1478869333.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:14.048Z,1478869334.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:14.762Z,1478869334.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:14.844Z,1478869334.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:14.953Z,1478869334.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:15.265Z,1478869335.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:15.640Z,1478869335.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:15.716Z,1478869335.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:16.048Z,1478869336.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:16.069Z,1478869336.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:16.473Z,1478869336.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:16.844Z,1478869336.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:16.865Z,1478869336.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:17.271Z,1478869337.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:17.640Z,1478869337.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:17.668Z,1478869337.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:18.073Z,1478869338.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:18.140Z,1478869338.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:18.469Z,1478869338.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:18.869Z,1478869338.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:18.936Z,1478869338.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:19.273Z,1478869339.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:19.666Z,1478869339.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:19.732Z,1478869339.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:20.132Z,1478869340.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:20.479Z,1478869340.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:20.516Z,1478869340.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:20.872Z,1478869340.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:21.273Z,1478869341.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:21.312Z,1478869341.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:21.677Z,1478869341.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:22.108Z,1478869342.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:22.126Z,1478869342.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:22.481Z,1478869342.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:22.516Z,1478869342.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:22.892Z,1478869342.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:23.292Z,1478869343.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:23.312Z,1478869343.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:23.694Z,1478869343.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:24.004Z,1478869344.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:24.076Z,1478869344.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:24.464Z,1478869344.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:24.800Z,1478869344.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:24.886Z,1478869344.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:25.281Z,1478869345.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:25.597Z,1478869345.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:25.714Z,1478869345.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:26.012Z,1478869346.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:26.114Z,1478869346.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:26.498Z,1478869346.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:26.808Z,1478869346.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:26.938Z,1478869346.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:27.286Z,1478869347.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:27.605Z,1478869347.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:27.697Z,1478869347.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:28.016Z,1478869348.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:28.092Z,1478869348.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:28.493Z,1478869348.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:28.812Z,1478869348.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:28.902Z,1478869348.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:29.280Z,1478869349.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:29.609Z,1478869349.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:29.730Z,1478869349.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:30.048Z,1478869350.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:30.089Z,1478869350.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:30.483Z,1478869350.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:30.852Z,1478869350.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:30.876Z,1478869350.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:31.318Z,1478869351.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:31.648Z,1478869351.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:31.742Z,1478869351.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:32.086Z,1478869352.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:32.116Z,1478869352.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:32.474Z,1478869352.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:32.878Z,1478869352.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:32.912Z,1478869352.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:33.314Z,1478869353.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:33.675Z,1478869353.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:33.708Z,1478869353.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:34.114Z,1478869354.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:34.488Z,1478869354.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:34.492Z,1478869354.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:34.876Z,1478869354.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:35.278Z,1478869355.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:35.288Z,1478869355.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:35.661Z,1478869355.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:36.084Z,1478869356.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:36.159Z,1478869356.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:36.469Z,1478869356.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:36.492Z,1478869356.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:36.930Z,1478869356.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:37.269Z,1478869357.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:37.288Z,1478869357.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:37.687Z,1478869357.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:37.981Z,1478869357.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:38.099Z,1478869358.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:38.503Z,1478869358.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:38.776Z,1478869358.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:38.875Z,1478869358.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:39.347Z,1478869359.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:39.575Z,1478869359.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:39.678Z,1478869359.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:39.988Z,1478869359.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:40.086Z,1478869360.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:40.490Z,1478869360.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:40.784Z,1478869360.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:40.933Z,1478869360.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:41.284Z,1478869361.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:41.581Z,1478869361.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:41.708Z,1478869361.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:41.992Z,1478869361.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:42.097Z,1478869362.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:42.480Z,1478869362.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:42.788Z,1478869362.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:42.885Z,1478869362.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:43.321Z,1478869363.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:43.585Z,1478869363.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:43.687Z,1478869363.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:43.996Z,1478869363.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:44.086Z,1478869364.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:44.494Z,1478869364.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:44.792Z,1478869364.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:44.886Z,1478869364.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:45.289Z,1478869365.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:45.588Z,1478869365.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:45.771Z,1478869365.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:46.080Z,1478869366.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:46.098Z,1478869366.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:46.474Z,1478869366.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:46.876Z,1478869366.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:46.882Z,1478869366.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:47.282Z,1478869367.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:47.672Z,1478869367.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:47.687Z,1478869367.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:48.140Z,1478869368.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:48.468Z,1478869368.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:48.486Z,1478869368.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:48.876Z,1478869368.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:48.896Z,1478869368.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:49.305Z,1478869369.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:49.672Z,1478869369.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:49.698Z,1478869369.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:50.110Z,1478869370.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:50.468Z,1478869370.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:50.485Z,1478869370.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:50.876Z,1478869370.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:50.878Z,1478869370.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:51.292Z,1478869371.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:51.672Z,1478869371.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:51.695Z,1478869371.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:52.080Z,1478869372.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:52.094Z,1478869372.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:52.500Z,1478869372.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:52.876Z,1478869372.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:52.882Z,1478869372.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:53.283Z,1478869373.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:53.672Z,1478869373.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:53.680Z,1478869373.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:54.080Z,1478869374.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:54.109Z,1478869374.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:54.465Z,1478869374.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:54.863Z,1478869374.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:54.884Z,1478869374.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:55.269Z,1478869375.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:55.680Z,1478869375.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:55.705Z,1478869375.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:56.074Z,1478869376.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:56.088Z,1478869376.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:56.490Z,1478869376.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:56.865Z,1478869376.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:56.884Z,1478869376.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:57.317Z,1478869377.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:57.680Z,1478869377.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:57.721Z,1478869377.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:58.080Z,1478869378.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:58.088Z,1478869378.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:58.478Z,1478869378.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:58.877Z,1478869378.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:58.884Z,1478869378.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:59.275Z,1478869379.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:02:59.680Z,1478869379.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:02:59.690Z,1478869379.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:00.082Z,1478869380.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:00.473Z,1478869380.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:00.476Z,1478869380.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:00.878Z,1478869380.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:01.261Z,1478869381.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:01.272Z,1478869381.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:01.665Z,1478869381.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:02.068Z,1478869382.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:02.081Z,1478869382.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:02.481Z,1478869382.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:02.864Z,1478869382.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:02.866Z,1478869382.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:03.260Z,1478869383.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:03.660Z,1478869383.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:03.662Z,1478869383.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:04.062Z,1478869384.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:04.456Z,1478869384.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:04.466Z,1478869384.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:04.862Z,1478869384.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:05.252Z,1478869385.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:05.269Z,1478869385.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:05.661Z,1478869385.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:06.048Z,1478869386.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:06.083Z,1478869386.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:06.467Z,1478869386.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:06.844Z,1478869386.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:06.865Z,1478869386.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:07.266Z,1478869387.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:07.640Z,1478869387.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:07.662Z,1478869387.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:08.061Z,1478869388.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:08.437Z,1478869388.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:08.489Z,1478869388.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:08.857Z,1478869388.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:09.234Z,1478869389.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:09.261Z,1478869389.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:09.657Z,1478869389.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:10.028Z,1478869390.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:10.060Z,1478869390.060 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T13:03:10.061Z,1478869390.061 [BPC1] Data Fault, FailCount= 1
2016-11-11T13:03:10.061Z,1478869390.061 [BPC1](ERROR): Data Fault
2016-11-11T13:03:10.069Z,1478869390.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:10.089Z,1478869390.089 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T13:03:10.472Z,1478869390.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:10.824Z,1478869390.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:10.858Z,1478869390.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:11.265Z,1478869391.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:11.346Z,1478869391.346 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:03:11.347Z,1478869391.346 [BPC1] No Fault, FailCount= 1
2016-11-11T13:03:11.620Z,1478869391.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:12.416Z,1478869392.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:13.212Z,1478869393.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:14.008Z,1478869394.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:14.581Z,1478869394.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:14.699Z,1478869394.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:14.804Z,1478869394.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:15.074Z,1478869395.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:15.448Z,1478869395.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:15.600Z,1478869395.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:15.849Z,1478869395.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:16.251Z,1478869396.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:16.396Z,1478869396.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:16.657Z,1478869396.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:17.053Z,1478869397.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:17.192Z,1478869397.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:17.457Z,1478869397.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:17.853Z,1478869397.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:17.988Z,1478869397.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:18.253Z,1478869398.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:18.653Z,1478869398.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:18.784Z,1478869398.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:19.062Z,1478869399.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:19.463Z,1478869399.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:19.580Z,1478869399.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:19.848Z,1478869399.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:20.248Z,1478869400.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:20.376Z,1478869400.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:20.648Z,1478869400.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:21.061Z,1478869401.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:21.181Z,1478869401.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:21.448Z,1478869401.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:21.849Z,1478869401.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:21.976Z,1478869401.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:22.253Z,1478869402.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:22.649Z,1478869402.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:22.774Z,1478869402.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:23.049Z,1478869403.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:23.448Z,1478869403.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:23.568Z,1478869403.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:23.846Z,1478869403.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:24.028Z,1478869404.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:24.249Z,1478869404.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:24.436Z,1478869404.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:24.650Z,1478869404.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:24.844Z,1478869404.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:25.061Z,1478869405.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:25.252Z,1478869405.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:25.457Z,1478869405.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:25.660Z,1478869405.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:25.857Z,1478869405.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:26.068Z,1478869406.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:26.285Z,1478869406.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:26.476Z,1478869406.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:26.657Z,1478869406.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:26.884Z,1478869406.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:27.077Z,1478869407.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:27.292Z,1478869407.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:27.477Z,1478869407.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:27.700Z,1478869407.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:27.885Z,1478869407.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:28.108Z,1478869408.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:28.257Z,1478869408.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:28.516Z,1478869408.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:28.678Z,1478869408.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:28.924Z,1478869408.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:29.078Z,1478869409.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:29.332Z,1478869409.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:29.457Z,1478869409.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:29.740Z,1478869409.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:29.921Z,1478869409.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:30.257Z,1478869410.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:30.368Z,1478869410.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:30.661Z,1478869410.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:31.053Z,1478869411.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:31.164Z,1478869411.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:31.461Z,1478869411.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:31.875Z,1478869411.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:31.961Z,1478869411.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:32.266Z,1478869412.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:32.372Z,1478869412.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:32.656Z,1478869412.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:33.056Z,1478869413.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:33.168Z,1478869413.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:33.527Z,1478869413.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:33.873Z,1478869413.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:33.892Z,1478869413.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:34.263Z,1478869414.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:34.665Z,1478869414.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:34.688Z,1478869414.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:35.056Z,1478869415.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:35.484Z,1478869415.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:35.527Z,1478869415.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:35.864Z,1478869415.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:35.900Z,1478869415.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:36.260Z,1478869416.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:36.660Z,1478869416.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:36.696Z,1478869416.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:37.064Z,1478869417.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:37.493Z,1478869417.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:37.506Z,1478869417.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:37.868Z,1478869417.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:37.904Z,1478869417.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:38.274Z,1478869418.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:38.669Z,1478869418.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:38.700Z,1478869418.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:39.049Z,1478869419.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:39.503Z,1478869419.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:39.554Z,1478869419.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:39.862Z,1478869419.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:39.912Z,1478869419.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:40.256Z,1478869420.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:40.663Z,1478869420.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:40.708Z,1478869420.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:41.089Z,1478869421.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:41.465Z,1478869421.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:41.504Z,1478869421.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:41.871Z,1478869421.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:41.984Z,1478869421.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:42.274Z,1478869422.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:42.663Z,1478869422.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:42.780Z,1478869422.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:43.094Z,1478869423.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:43.486Z,1478869423.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:43.576Z,1478869423.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:43.869Z,1478869423.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:44.261Z,1478869424.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:44.360Z,1478869424.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:44.657Z,1478869424.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:45.060Z,1478869425.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:45.156Z,1478869425.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:45.461Z,1478869425.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:45.861Z,1478869425.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:45.953Z,1478869425.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:46.265Z,1478869426.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:46.364Z,1478869426.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:46.663Z,1478869426.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:47.072Z,1478869427.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:47.160Z,1478869427.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:47.516Z,1478869427.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:47.861Z,1478869427.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:47.888Z,1478869427.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:48.253Z,1478869428.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:48.656Z,1478869428.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:48.684Z,1478869428.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:49.070Z,1478869429.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:49.481Z,1478869429.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:49.526Z,1478869429.526 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:49.526Z,1478869429.526 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 145
2016-11-11T13:03:49.527Z,1478869429.527 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:03:49.546Z,1478869429.546 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:49.546Z,1478869429.546 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 145
2016-11-11T13:03:49.546Z,1478869429.546 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:03:49.549Z,1478869429.549 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:49.549Z,1478869429.549 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 145
2016-11-11T13:03:49.549Z,1478869429.549 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:03:49.600Z,1478869429.599 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:03:49.600Z,1478869429.600 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:03:49.600Z,1478869429.600 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:03:49.888Z,1478869429.888 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:03:49.888Z,1478869429.888 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 145
2016-11-11T13:03:49.889Z,1478869429.889 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:03:49.889Z,1478869429.889 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 145
2016-11-11T13:03:49.889Z,1478869429.889 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:03:49.890Z,1478869429.889 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 145
2016-11-11T13:03:49.896Z,1478869429.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:50.273Z,1478869430.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:03:50.274Z,1478869430.274 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:03:50.274Z,1478869430.274 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:03:50.278Z,1478869430.279 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:03:50.279Z,1478869430.279 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:03:50.279Z,1478869430.279 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:03:50.280Z,1478869430.280 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:03:50.280Z,1478869430.280 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:03:50.281Z,1478869430.281 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:03:50.656Z,1478869430.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:50.692Z,1478869430.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:51.062Z,1478869431.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:51.488Z,1478869431.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:51.509Z,1478869431.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:51.863Z,1478869431.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:51.896Z,1478869431.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:52.265Z,1478869432.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:52.655Z,1478869432.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:52.692Z,1478869432.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:53.061Z,1478869433.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:53.488Z,1478869433.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:53.514Z,1478869433.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:53.873Z,1478869433.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:53.896Z,1478869433.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:54.265Z,1478869434.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:54.674Z,1478869434.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:54.692Z,1478869434.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:55.063Z,1478869435.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:55.481Z,1478869435.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:55.488Z,1478869435.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:55.868Z,1478869435.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:55.984Z,1478869435.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:56.274Z,1478869436.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:56.669Z,1478869436.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:56.780Z,1478869436.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:57.085Z,1478869437.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:57.490Z,1478869437.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:57.576Z,1478869437.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:57.848Z,1478869437.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:58.261Z,1478869438.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:58.336Z,1478869438.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:58.652Z,1478869438.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:59.059Z,1478869439.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:59.132Z,1478869439.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:03:59.463Z,1478869439.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:59.857Z,1478869439.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:03:59.928Z,1478869439.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:00.253Z,1478869440.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:00.340Z,1478869440.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:00.652Z,1478869440.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:01.053Z,1478869441.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:01.136Z,1478869441.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:01.509Z,1478869441.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:01.868Z,1478869441.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:01.908Z,1478869441.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:02.269Z,1478869442.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:02.665Z,1478869442.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:02.704Z,1478869442.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:03.057Z,1478869443.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:03.500Z,1478869443.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:03.526Z,1478869443.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:03.860Z,1478869443.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:03.908Z,1478869443.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:04.255Z,1478869444.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:04.657Z,1478869444.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:04.704Z,1478869444.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:05.060Z,1478869445.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:05.496Z,1478869445.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:05.500Z,1478869445.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:05.860Z,1478869445.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:05.908Z,1478869445.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:06.214Z,1478869446.214 [NAL9602](INFO): SBD MO Status=2, MOMSN=347, MT Status=2, MTMSN=0
2016-11-11T13:04:06.214Z,1478869446.214 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T13:04:06.273Z,1478869446.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:06.666Z,1478869446.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:06.704Z,1478869446.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:07.069Z,1478869447.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:07.494Z,1478869447.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:07.500Z,1478869447.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:07.873Z,1478869447.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:07.924Z,1478869447.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:08.253Z,1478869448.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:08.648Z,1478869448.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:08.720Z,1478869448.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:09.101Z,1478869449.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:09.509Z,1478869449.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:09.516Z,1478869449.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:09.860Z,1478869449.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:09.944Z,1478869449.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:10.301Z,1478869450.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:10.669Z,1478869450.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:10.741Z,1478869450.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:11.099Z,1478869451.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:11.508Z,1478869451.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:11.536Z,1478869451.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:12.293Z,1478869452.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:13.088Z,1478869453.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:13.885Z,1478869453.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:14.300Z,1478869454.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:14.887Z,1478869454.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:15.056Z,1478869455.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:15.096Z,1478869455.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:15.462Z,1478869455.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:15.796Z,1478869455.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:15.828Z,1478869455.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:16.200Z,1478869456.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:16.599Z,1478869456.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:16.624Z,1478869456.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:16.997Z,1478869456.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:17.421Z,1478869457.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:17.451Z,1478869457.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:17.805Z,1478869457.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:17.836Z,1478869457.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:18.205Z,1478869458.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:18.604Z,1478869458.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:18.632Z,1478869458.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:19.002Z,1478869459.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:19.429Z,1478869459.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:19.443Z,1478869459.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:19.798Z,1478869459.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:19.840Z,1478869459.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:20.197Z,1478869460.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:20.596Z,1478869460.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:20.636Z,1478869460.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:21.008Z,1478869461.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:21.433Z,1478869461.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:21.502Z,1478869461.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:21.800Z,1478869461.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:21.844Z,1478869461.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:22.201Z,1478869462.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:22.600Z,1478869462.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:22.640Z,1478869462.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:23.018Z,1478869463.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:23.414Z,1478869463.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:23.436Z,1478869463.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:23.837Z,1478869463.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:23.920Z,1478869463.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:24.217Z,1478869464.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:24.610Z,1478869464.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:24.716Z,1478869464.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:25.041Z,1478869465.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:25.395Z,1478869465.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:25.512Z,1478869465.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:25.825Z,1478869465.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:26.237Z,1478869466.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:26.284Z,1478869466.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:26.596Z,1478869466.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:27.002Z,1478869467.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:27.080Z,1478869467.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:27.396Z,1478869467.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:27.807Z,1478869467.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:27.877Z,1478869467.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:28.211Z,1478869468.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:28.288Z,1478869468.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:28.597Z,1478869468.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:28.997Z,1478869468.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:29.084Z,1478869469.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:29.483Z,1478869469.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:29.804Z,1478869469.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:29.807Z,1478869469.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:30.197Z,1478869470.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:30.600Z,1478869470.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:30.604Z,1478869470.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:30.997Z,1478869470.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:31.397Z,1478869471.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:31.479Z,1478869471.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:31.808Z,1478869471.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:31.809Z,1478869471.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:32.225Z,1478869472.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:32.604Z,1478869472.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:32.615Z,1478869472.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:33.013Z,1478869473.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:33.401Z,1478869473.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:33.472Z,1478869473.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:33.809Z,1478869473.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:33.812Z,1478869473.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:34.208Z,1478869474.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:34.609Z,1478869474.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:34.614Z,1478869474.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:35.011Z,1478869475.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:35.405Z,1478869475.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:35.463Z,1478869475.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:35.813Z,1478869475.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:35.816Z,1478869475.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:36.189Z,1478869476.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:36.597Z,1478869476.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:36.612Z,1478869476.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:37.001Z,1478869477.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:37.401Z,1478869477.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:37.412Z,1478869477.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:37.794Z,1478869477.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:37.888Z,1478869477.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:38.233Z,1478869478.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:38.645Z,1478869478.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:38.684Z,1478869478.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:39.004Z,1478869479.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:39.427Z,1478869479.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:39.480Z,1478869479.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:39.796Z,1478869479.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:40.245Z,1478869480.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:40.256Z,1478869480.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:40.641Z,1478869480.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:41.009Z,1478869481.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:41.052Z,1478869481.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:41.397Z,1478869481.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:41.798Z,1478869481.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:41.848Z,1478869481.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:42.209Z,1478869482.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:42.268Z,1478869482.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:42.605Z,1478869482.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:43.007Z,1478869483.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:43.064Z,1478869483.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:43.449Z,1478869483.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:43.784Z,1478869483.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:43.824Z,1478869483.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:44.201Z,1478869484.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:44.581Z,1478869484.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:44.597Z,1478869484.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:45.001Z,1478869485.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:45.377Z,1478869485.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:45.437Z,1478869485.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:45.801Z,1478869485.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:45.816Z,1478869485.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:46.206Z,1478869486.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:46.601Z,1478869486.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:46.612Z,1478869486.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:47.008Z,1478869487.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:47.408Z,1478869487.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:47.465Z,1478869487.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:47.811Z,1478869487.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:47.816Z,1478869487.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:48.199Z,1478869488.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:48.609Z,1478869488.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:48.612Z,1478869488.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:49.005Z,1478869489.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:49.408Z,1478869489.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:49.446Z,1478869489.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:49.805Z,1478869489.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:49.816Z,1478869489.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:50.193Z,1478869490.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:50.590Z,1478869490.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:50.612Z,1478869490.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:50.994Z,1478869490.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:51.392Z,1478869491.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:51.416Z,1478869491.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:51.805Z,1478869491.805 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T13:04:51.805Z,1478869491.805 [BPC1] Data Fault, FailCount= 1
2016-11-11T13:04:51.805Z,1478869491.805 [BPC1](ERROR): Data Fault
2016-11-11T13:04:51.817Z,1478869491.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:51.868Z,1478869491.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:51.890Z,1478869491.890 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T13:04:52.218Z,1478869492.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:52.606Z,1478869492.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:52.664Z,1478869492.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:53.009Z,1478869493.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:53.029Z,1478869493.029 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:04:53.029Z,1478869493.029 [BPC1] No Fault, FailCount= 1
2016-11-11T13:04:53.457Z,1478869493.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:53.460Z,1478869493.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:53.868Z,1478869493.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:54.227Z,1478869494.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:54.256Z,1478869494.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:54.622Z,1478869494.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:55.017Z,1478869495.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:55.052Z,1478869495.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:55.416Z,1478869495.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:55.852Z,1478869495.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:55.866Z,1478869495.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:56.221Z,1478869496.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:56.260Z,1478869496.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:56.625Z,1478869496.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:57.000Z,1478869497.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:57.056Z,1478869497.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:57.437Z,1478869497.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:57.756Z,1478869497.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:57.806Z,1478869497.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:58.201Z,1478869498.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:58.552Z,1478869498.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:58.596Z,1478869498.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:58.996Z,1478869498.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:59.356Z,1478869499.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:59.444Z,1478869499.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:04:59.796Z,1478869499.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:04:59.799Z,1478869499.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:00.205Z,1478869500.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:00.592Z,1478869500.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:00.598Z,1478869500.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:01.012Z,1478869501.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:01.389Z,1478869501.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:01.442Z,1478869501.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:01.796Z,1478869501.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:01.799Z,1478869501.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:02.205Z,1478869502.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:02.592Z,1478869502.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:02.605Z,1478869502.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:03.001Z,1478869503.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:03.388Z,1478869503.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:03.425Z,1478869503.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:03.796Z,1478869503.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:03.804Z,1478869503.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:04.204Z,1478869504.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:04.592Z,1478869504.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:04.602Z,1478869504.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:05.016Z,1478869505.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:05.388Z,1478869505.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:05.470Z,1478869505.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:05.830Z,1478869505.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:05.852Z,1478869505.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:06.218Z,1478869506.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:06.598Z,1478869506.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:06.648Z,1478869506.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:07.045Z,1478869507.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:07.405Z,1478869507.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:07.444Z,1478869507.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:07.878Z,1478869507.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:08.229Z,1478869508.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:08.236Z,1478869508.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:08.616Z,1478869508.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:09.021Z,1478869509.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:09.032Z,1478869509.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:09.416Z,1478869509.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:09.828Z,1478869509.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:09.864Z,1478869509.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:10.209Z,1478869510.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:10.614Z,1478869510.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:10.624Z,1478869510.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:10.985Z,1478869510.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:11.017Z,1478869511.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:11.032Z,1478869511.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:11.392Z,1478869511.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:11.423Z,1478869511.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:11.732Z,1478869511.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:11.774Z,1478869511.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:11.810Z,1478869511.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:12.528Z,1478869512.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:13.324Z,1478869513.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:13.740Z,1478869513.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:14.536Z,1478869514.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:15.289Z,1478869515.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:15.332Z,1478869515.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:15.354Z,1478869515.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:15.497Z,1478869515.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:15.532Z,1478869515.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:15.764Z,1478869515.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:15.873Z,1478869515.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:15.905Z,1478869515.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:16.273Z,1478869516.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:16.308Z,1478869516.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:16.560Z,1478869516.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:16.680Z,1478869516.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:16.712Z,1478869516.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:17.089Z,1478869517.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:17.104Z,1478869517.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:17.356Z,1478869517.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:17.506Z,1478869517.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:17.764Z,1478869517.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:17.912Z,1478869517.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:18.310Z,1478869518.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:18.560Z,1478869518.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:18.709Z,1478869518.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:19.108Z,1478869519.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:19.356Z,1478869519.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:19.520Z,1478869519.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:19.824Z,1478869519.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:19.893Z,1478869519.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:20.326Z,1478869520.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:20.620Z,1478869520.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:20.733Z,1478869520.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:21.101Z,1478869521.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:21.416Z,1478869521.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:21.501Z,1478869521.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:21.932Z,1478869521.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:22.184Z,1478869522.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:22.301Z,1478869522.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:22.734Z,1478869522.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:22.982Z,1478869522.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:23.141Z,1478869523.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:23.510Z,1478869523.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:23.777Z,1478869523.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:23.909Z,1478869523.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:24.188Z,1478869524.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:24.298Z,1478869524.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:24.712Z,1478869524.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:24.986Z,1478869524.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:25.104Z,1478869525.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:25.505Z,1478869525.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:25.712Z,1478869525.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:25.913Z,1478869525.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:26.319Z,1478869526.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:26.510Z,1478869526.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:26.707Z,1478869526.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:27.094Z,1478869527.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:27.305Z,1478869527.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:27.505Z,1478869527.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:27.716Z,1478869527.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:27.895Z,1478869527.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:28.301Z,1478869528.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:28.512Z,1478869528.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:28.697Z,1478869528.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:29.104Z,1478869529.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:29.319Z,1478869529.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:29.508Z,1478869529.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:29.744Z,1478869529.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:29.898Z,1478869529.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:30.308Z,1478869530.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:30.541Z,1478869530.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:30.715Z,1478869530.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:31.119Z,1478869531.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:31.336Z,1478869531.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:31.521Z,1478869531.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:31.744Z,1478869531.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:31.897Z,1478869531.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:32.300Z,1478869532.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:32.540Z,1478869532.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:32.705Z,1478869532.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:33.101Z,1478869533.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:33.336Z,1478869533.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:33.497Z,1478869533.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:33.804Z,1478869533.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:33.905Z,1478869533.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:34.307Z,1478869534.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:34.600Z,1478869534.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:34.690Z,1478869534.690 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T13:05:34.690Z,1478869534.690 [BPC1] Data Fault, FailCount= 1
2016-11-11T13:05:34.690Z,1478869534.690 [BPC1](ERROR): Data Fault
2016-11-11T13:05:34.702Z,1478869534.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:34.747Z,1478869534.747 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T13:05:35.123Z,1478869535.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:35.396Z,1478869535.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:35.521Z,1478869535.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:35.919Z,1478869535.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:35.956Z,1478869535.956 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:05:35.956Z,1478869535.956 [BPC1] No Fault, FailCount= 1
2016-11-11T13:05:36.164Z,1478869536.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:36.382Z,1478869536.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:36.693Z,1478869536.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:36.960Z,1478869536.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:37.129Z,1478869537.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:37.513Z,1478869537.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:37.757Z,1478869537.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:37.922Z,1478869537.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:38.172Z,1478869538.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:38.297Z,1478869538.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:38.697Z,1478869538.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:38.968Z,1478869538.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:39.101Z,1478869539.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:39.496Z,1478869539.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:39.688Z,1478869539.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:39.913Z,1478869539.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:40.306Z,1478869540.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:40.484Z,1478869540.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:40.720Z,1478869540.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:41.110Z,1478869541.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:41.281Z,1478869541.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:41.506Z,1478869541.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:41.696Z,1478869541.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:41.901Z,1478869541.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:42.314Z,1478869542.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:42.494Z,1478869542.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:42.712Z,1478869542.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:43.093Z,1478869543.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:43.289Z,1478869543.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:43.497Z,1478869543.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:43.700Z,1478869543.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:43.891Z,1478869543.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:44.301Z,1478869544.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:44.496Z,1478869544.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:44.703Z,1478869544.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:45.102Z,1478869545.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:45.293Z,1478869545.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:45.506Z,1478869545.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:45.704Z,1478869545.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:45.910Z,1478869545.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:46.313Z,1478869546.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:46.500Z,1478869546.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:46.702Z,1478869546.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:47.114Z,1478869547.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:47.298Z,1478869547.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:47.545Z,1478869547.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:47.784Z,1478869547.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:47.897Z,1478869547.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:48.295Z,1478869548.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:48.580Z,1478869548.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:48.701Z,1478869548.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:49.133Z,1478869549.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:49.376Z,1478869549.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:49.499Z,1478869549.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:49.937Z,1478869549.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:50.148Z,1478869550.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:50.313Z,1478869550.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:50.745Z,1478869550.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:50.944Z,1478869550.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:51.137Z,1478869551.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:51.506Z,1478869551.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:51.741Z,1478869551.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:51.901Z,1478869551.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:52.152Z,1478869552.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:52.309Z,1478869552.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:52.698Z,1478869552.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:52.948Z,1478869552.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:53.105Z,1478869553.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:53.508Z,1478869553.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:53.668Z,1478869553.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:53.908Z,1478869553.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:54.307Z,1478869554.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:54.464Z,1478869554.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:54.708Z,1478869554.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:55.108Z,1478869555.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:55.261Z,1478869555.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:55.518Z,1478869555.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:55.672Z,1478869555.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:55.921Z,1478869555.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:56.310Z,1478869556.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:56.468Z,1478869556.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:56.722Z,1478869556.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:57.097Z,1478869557.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:57.265Z,1478869557.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:57.497Z,1478869557.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:57.676Z,1478869557.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:57.893Z,1478869557.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:58.305Z,1478869558.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:58.472Z,1478869558.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:58.701Z,1478869558.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:59.105Z,1478869559.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:59.157Z,1478869559.157 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T13:05:59.269Z,1478869559.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:59.502Z,1478869559.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:05:59.682Z,1478869559.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:05:59.898Z,1478869559.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:00.313Z,1478869560.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:00.476Z,1478869560.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:00.711Z,1478869560.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:01.109Z,1478869561.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:01.272Z,1478869561.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:01.518Z,1478869561.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:01.764Z,1478869561.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:01.940Z,1478869561.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:02.304Z,1478869562.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:02.560Z,1478869562.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:02.707Z,1478869562.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:03.099Z,1478869563.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:03.356Z,1478869563.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:03.543Z,1478869563.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:03.905Z,1478869563.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:04.124Z,1478869564.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:04.304Z,1478869564.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:04.727Z,1478869564.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:04.922Z,1478869564.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:05.109Z,1478869565.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:05.543Z,1478869565.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:05.717Z,1478869565.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:05.906Z,1478869565.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:06.128Z,1478869566.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:06.345Z,1478869566.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:06.708Z,1478869566.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:06.924Z,1478869566.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:07.098Z,1478869567.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:07.503Z,1478869567.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:07.652Z,1478869567.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:07.909Z,1478869567.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:08.301Z,1478869568.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:08.448Z,1478869568.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:08.707Z,1478869568.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:09.109Z,1478869569.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:09.245Z,1478869569.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:09.515Z,1478869569.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:09.668Z,1478869569.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:09.919Z,1478869569.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:10.289Z,1478869570.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:10.464Z,1478869570.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:10.701Z,1478869570.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:11.101Z,1478869571.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:11.110Z,1478869571.110 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T13:01:10.9Z
2016-11-11T13:06:11.110Z,1478869571.110 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T13:06:11.110Z,1478869571.110 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T13:06:11.261Z,1478869571.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:11.505Z,1478869571.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:11.677Z,1478869571.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:12.463Z,1478869572.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:12.472Z,1478869572.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:13.268Z,1478869573.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:13.676Z,1478869573.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:14.472Z,1478869574.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:15.268Z,1478869575.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:15.744Z,1478869575.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:15.829Z,1478869575.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:15.899Z,1478869575.899 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0192.lzma
2016-11-11T13:06:15.970Z,1478869575.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:16.338Z,1478869576.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:16.540Z,1478869576.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:16.699Z,1478869576.699 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0192.lzma.bak
2016-11-11T13:06:16.699Z,1478869576.699 [DataOverHttps](INFO): SBD MOMSN=4555429
2016-11-11T13:06:16.774Z,1478869576.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:17.336Z,1478869577.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:18.104Z,1478869578.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:18.900Z,1478869578.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:18.926Z,1478869578.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:19.075Z,1478869579.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:19.697Z,1478869579.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:20.116Z,1478869580.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:20.912Z,1478869580.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:21.628Z,1478869581.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:22.424Z,1478869582.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:22.586Z,1478869582.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:22.726Z,1478869582.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:23.110Z,1478869583.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:23.221Z,1478869583.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:23.498Z,1478869583.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:23.632Z,1478869583.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:23.881Z,1478869583.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:24.282Z,1478869584.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:24.428Z,1478869584.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:25.225Z,1478869585.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:25.636Z,1478869585.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:26.432Z,1478869586.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:27.229Z,1478869587.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:27.642Z,1478869587.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:27.870Z,1478869587.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:27.936Z,1478869587.935 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0193.lzma
2016-11-11T13:06:28.008Z,1478869588.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:28.379Z,1478869588.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:28.436Z,1478869588.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:29.232Z,1478869589.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:30.028Z,1478869590.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:30.824Z,1478869590.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:31.620Z,1478869591.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:32.416Z,1478869592.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:33.212Z,1478869593.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:34.008Z,1478869594.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:34.804Z,1478869594.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:35.600Z,1478869595.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:36.396Z,1478869596.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:37.192Z,1478869597.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:37.988Z,1478869597.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:38.784Z,1478869598.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:39.580Z,1478869599.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:40.376Z,1478869600.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:41.175Z,1478869601.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:41.974Z,1478869601.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:42.768Z,1478869602.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:43.564Z,1478869603.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:44.360Z,1478869604.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:45.156Z,1478869605.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:45.887Z,1478869605.887 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0193.lzma.bak
2016-11-11T13:06:45.887Z,1478869605.887 [DataOverHttps](INFO): SBD MOMSN=4555431
2016-11-11T13:06:45.944Z,1478869605.944 [BPC1](ERROR): Failed to receive battery data
2016-11-11T13:06:45.944Z,1478869605.944 [BPC1] Communications Fault, FailCount= 1
2016-11-11T13:06:45.944Z,1478869605.944 [BPC1](ERROR): Communications Fault
2016-11-11T13:06:45.952Z,1478869605.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:46.014Z,1478869606.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:46.097Z,1478869606.097 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T13:06:46.360Z,1478869606.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:46.768Z,1478869606.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:47.184Z,1478869607.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:47.592Z,1478869607.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:47.788Z,1478869607.788 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T13:06:47.836Z,1478869607.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:47.845Z,1478869607.845 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T13:06:47.845Z,1478869607.845 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T13:06:47.845Z,1478869607.845 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T13:06:47.978Z,1478869607.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:48.028Z,1478869608.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:48.436Z,1478869608.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:48.844Z,1478869608.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:49.252Z,1478869609.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:49.660Z,1478869609.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:50.068Z,1478869610.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:50.476Z,1478869610.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:51.272Z,1478869611.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:51.501Z,1478869611.501 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:51.501Z,1478869611.501 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 146
2016-11-11T13:06:51.502Z,1478869611.501 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:06:51.508Z,1478869611.508 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:51.508Z,1478869611.508 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 146
2016-11-11T13:06:51.508Z,1478869611.509 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:06:51.511Z,1478869611.510 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:51.511Z,1478869611.511 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 146
2016-11-11T13:06:51.511Z,1478869611.511 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:06:51.591Z,1478869611.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:06:51.592Z,1478869611.592 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:06:51.592Z,1478869611.592 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:06:51.592Z,1478869611.592 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:06:51.592Z,1478869611.592 [BPC1] No Fault, FailCount= 1
2016-11-11T13:06:51.680Z,1478869611.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:51.758Z,1478869611.759 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:06:51.759Z,1478869611.759 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 146
2016-11-11T13:06:51.763Z,1478869611.763 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:06:51.764Z,1478869611.764 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 146
2016-11-11T13:06:51.764Z,1478869611.764 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:06:51.764Z,1478869611.764 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 146
2016-11-11T13:06:52.081Z,1478869612.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:06:52.082Z,1478869612.082 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:06:52.082Z,1478869612.082 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:06:52.086Z,1478869612.086 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:06:52.087Z,1478869612.087 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:06:52.087Z,1478869612.087 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:06:52.088Z,1478869612.088 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:06:52.088Z,1478869612.088 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:06:52.089Z,1478869612.089 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:06:52.465Z,1478869612.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:52.476Z,1478869612.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:52.841Z,1478869612.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:53.204Z,1478869613.204 [NAL9602](INFO): Powering down
2016-11-11T13:06:53.249Z,1478869613.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:53.272Z,1478869613.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:53.666Z,1478869613.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:53.680Z,1478869613.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:54.062Z,1478869614.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:54.440Z,1478869614.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:54.476Z,1478869614.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:54.856Z,1478869614.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:55.245Z,1478869615.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:55.272Z,1478869615.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:55.651Z,1478869615.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:55.680Z,1478869615.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:56.053Z,1478869616.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:56.451Z,1478869616.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:56.488Z,1478869616.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:56.853Z,1478869616.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:57.292Z,1478869617.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:57.308Z,1478869617.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:57.655Z,1478869617.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:57.700Z,1478869617.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:58.053Z,1478869618.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:58.452Z,1478869618.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:58.496Z,1478869618.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:58.846Z,1478869618.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:59.249Z,1478869619.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:06:59.292Z,1478869619.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:06:59.700Z,1478869619.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:00.036Z,1478869620.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:00.042Z,1478869620.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:00.445Z,1478869620.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:00.832Z,1478869620.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:00.845Z,1478869620.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:01.249Z,1478869621.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:01.629Z,1478869621.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:01.699Z,1478869621.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:02.040Z,1478869622.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:02.057Z,1478869622.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:02.456Z,1478869622.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:02.836Z,1478869622.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:02.858Z,1478869622.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:03.281Z,1478869623.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:03.540Z,1478869623.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:03.661Z,1478869623.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:04.105Z,1478869624.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:04.336Z,1478869624.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:04.450Z,1478869624.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:04.885Z,1478869624.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:05.133Z,1478869625.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:05.254Z,1478869625.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:05.544Z,1478869625.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:05.670Z,1478869625.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:06.073Z,1478869626.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:06.340Z,1478869626.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:06.452Z,1478869626.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:06.856Z,1478869626.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:07.137Z,1478869627.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:07.264Z,1478869627.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:07.548Z,1478869627.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:07.656Z,1478869627.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:08.056Z,1478869628.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:08.344Z,1478869628.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:08.456Z,1478869628.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:08.865Z,1478869628.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:09.141Z,1478869629.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:09.245Z,1478869629.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:09.552Z,1478869629.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:09.645Z,1478869629.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:10.049Z,1478869630.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:10.348Z,1478869630.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:10.444Z,1478869630.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:10.845Z,1478869630.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:11.144Z,1478869631.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:11.288Z,1478869631.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:11.656Z,1478869631.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:11.688Z,1478869631.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:12.049Z,1478869632.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:12.455Z,1478869632.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:12.508Z,1478869632.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:12.856Z,1478869632.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:13.252Z,1478869633.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:13.304Z,1478869633.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:13.685Z,1478869633.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:13.000Z,1478869634.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:14.062Z,1478869634.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:14.445Z,1478869634.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:14.796Z,1478869634.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:14.850Z,1478869634.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:15.253Z,1478869635.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:15.593Z,1478869635.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:15.677Z,1478869635.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:16.016Z,1478869636.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:16.054Z,1478869636.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:16.509Z,1478869636.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:16.814Z,1478869636.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:16.837Z,1478869636.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:17.264Z,1478869637.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:17.520Z,1478869637.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:17.645Z,1478869637.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:18.081Z,1478869638.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:18.316Z,1478869638.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:18.449Z,1478869638.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:18.877Z,1478869638.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:19.113Z,1478869639.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:19.257Z,1478869639.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:19.524Z,1478869639.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:19.671Z,1478869639.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:20.093Z,1478869640.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:20.321Z,1478869640.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:20.448Z,1478869640.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:20.847Z,1478869640.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:21.117Z,1478869641.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:21.252Z,1478869641.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:21.536Z,1478869641.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:21.649Z,1478869641.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:22.051Z,1478869642.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:22.332Z,1478869642.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:22.453Z,1478869642.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:22.849Z,1478869642.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:23.129Z,1478869643.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:23.256Z,1478869643.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:23.540Z,1478869643.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:23.665Z,1478869643.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:24.052Z,1478869644.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:24.338Z,1478869644.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:24.459Z,1478869644.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:24.835Z,1478869644.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:25.132Z,1478869645.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:25.281Z,1478869645.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:25.649Z,1478869645.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:25.928Z,1478869645.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:26.061Z,1478869646.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:26.496Z,1478869646.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:26.732Z,1478869646.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:26.847Z,1478869646.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:27.268Z,1478869647.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:27.528Z,1478869647.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:27.645Z,1478869647.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:28.045Z,1478869648.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:28.324Z,1478869648.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:28.445Z,1478869648.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:28.845Z,1478869648.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:29.120Z,1478869649.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:29.241Z,1478869649.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:29.640Z,1478869649.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:29.916Z,1478869649.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:30.045Z,1478869650.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:30.441Z,1478869650.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:30.712Z,1478869650.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:30.878Z,1478869650.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:31.240Z,1478869651.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:31.508Z,1478869651.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:31.641Z,1478869651.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:32.036Z,1478869652.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:32.304Z,1478869652.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:32.469Z,1478869652.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:32.841Z,1478869652.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:33.100Z,1478869653.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:33.245Z,1478869653.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:33.669Z,1478869653.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:33.896Z,1478869653.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:34.045Z,1478869654.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:34.457Z,1478869654.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:34.692Z,1478869654.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:34.869Z,1478869654.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:35.241Z,1478869655.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:35.488Z,1478869655.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:35.643Z,1478869655.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:36.065Z,1478869656.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:36.284Z,1478869656.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:36.441Z,1478869656.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:36.836Z,1478869656.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:37.080Z,1478869657.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:37.240Z,1478869657.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:37.645Z,1478869657.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:37.876Z,1478869657.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:38.045Z,1478869658.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:38.440Z,1478869658.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:38.672Z,1478869658.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:38.837Z,1478869658.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:39.242Z,1478869659.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:39.468Z,1478869659.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:39.687Z,1478869659.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:40.051Z,1478869660.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:40.264Z,1478869660.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:40.440Z,1478869660.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:40.845Z,1478869660.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:41.060Z,1478869661.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:41.245Z,1478869661.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:41.641Z,1478869661.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:41.856Z,1478869661.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:42.045Z,1478869662.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:42.449Z,1478869662.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:42.652Z,1478869662.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:42.845Z,1478869662.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:43.240Z,1478869663.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:43.448Z,1478869663.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:43.645Z,1478869663.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:44.045Z,1478869664.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:44.244Z,1478869664.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:44.459Z,1478869664.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:44.656Z,1478869664.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:44.849Z,1478869664.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:45.065Z,1478869665.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:45.266Z,1478869665.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:45.476Z,1478869665.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:45.689Z,1478869665.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:45.884Z,1478869665.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:46.074Z,1478869666.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:46.292Z,1478869666.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:46.484Z,1478869666.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:46.700Z,1478869666.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:46.910Z,1478869666.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:47.108Z,1478869667.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:47.262Z,1478869667.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:47.516Z,1478869667.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:47.665Z,1478869667.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:47.924Z,1478869667.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:48.059Z,1478869668.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:48.332Z,1478869668.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:48.474Z,1478869668.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:48.740Z,1478869668.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:49.148Z,1478869669.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:49.556Z,1478869669.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:50.352Z,1478869670.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:51.148Z,1478869671.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:51.556Z,1478869671.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:52.352Z,1478869672.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:53.149Z,1478869673.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:53.584Z,1478869673.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:54.380Z,1478869674.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:55.176Z,1478869675.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:55.944Z,1478869675.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:56.740Z,1478869676.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:56.893Z,1478869676.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:57.089Z,1478869677.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:57.383Z,1478869677.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:57.537Z,1478869677.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:57.790Z,1478869677.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:57.948Z,1478869677.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:58.211Z,1478869678.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:58.569Z,1478869678.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:58.744Z,1478869678.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:59.059Z,1478869679.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:59.370Z,1478869679.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:07:59.456Z,1478869679.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:07:59.814Z,1478869679.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:00.173Z,1478869680.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:00.252Z,1478869680.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:00.614Z,1478869680.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:00.995Z,1478869680.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:01.049Z,1478869681.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:01.395Z,1478869681.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:01.460Z,1478869681.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:01.842Z,1478869681.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:02.212Z,1478869682.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:02.256Z,1478869682.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:02.560Z,1478869682.560 [PNI_TCM](ERROR): CRC does not match. Expected:0x18755 got:0x57351
2016-11-11T13:08:02.613Z,1478869682.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:03.001Z,1478869683.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:03.053Z,1478869683.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:03.375Z,1478869683.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:03.464Z,1478869683.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:03.821Z,1478869683.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:04.156Z,1478869684.156 [PNI_TCM](ERROR): CRC does not match. Expected:0x3298 got:0x18320
2016-11-11T13:08:04.230Z,1478869684.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:04.260Z,1478869684.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:04.582Z,1478869684.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:04.990Z,1478869684.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:05.056Z,1478869685.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:05.390Z,1478869685.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:05.468Z,1478869685.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:05.763Z,1478869685.763 [PNI_TCM](ERROR): CRC does not match. Expected:0x63651 got:0x172
2016-11-11T13:08:05.805Z,1478869685.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:06.185Z,1478869686.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:06.264Z,1478869686.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:06.586Z,1478869686.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:06.977Z,1478869686.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:07.060Z,1478869687.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:07.356Z,1478869687.356 [PNI_TCM](ERROR): CRC does not match. Expected:0x11345 got:0x40199
2016-11-11T13:08:07.395Z,1478869687.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:07.548Z,1478869687.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:07.787Z,1478869687.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:08.217Z,1478869688.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:08.344Z,1478869688.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:08.598Z,1478869688.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:09.022Z,1478869689.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:09.140Z,1478869689.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:09.374Z,1478869689.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:09.818Z,1478869689.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:09.904Z,1478869689.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:10.213Z,1478869690.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:10.625Z,1478869690.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:10.700Z,1478869690.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:10.995Z,1478869690.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:11.386Z,1478869691.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:11.496Z,1478869691.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:11.785Z,1478869691.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:11.912Z,1478869691.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:12.185Z,1478869692.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:12.587Z,1478869692.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:12.708Z,1478869692.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:13.057Z,1478869693.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:13.431Z,1478869693.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:13.456Z,1478869693.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:13.804Z,1478869693.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:14.179Z,1478869694.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:14.252Z,1478869694.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:14.575Z,1478869694.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:14.980Z,1478869694.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:15.048Z,1478869695.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:15.380Z,1478869695.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:15.468Z,1478869695.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:15.765Z,1478869695.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:16.160Z,1478869696.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:16.264Z,1478869696.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:16.568Z,1478869696.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:16.969Z,1478869696.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:17.060Z,1478869697.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:17.368Z,1478869697.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:17.468Z,1478869697.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:17.773Z,1478869697.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:18.177Z,1478869698.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:18.264Z,1478869698.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:18.569Z,1478869698.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:18.976Z,1478869698.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:19.060Z,1478869699.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:19.379Z,1478869699.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:19.468Z,1478869699.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:19.773Z,1478869699.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:20.186Z,1478869700.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:20.265Z,1478869700.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:20.581Z,1478869700.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:20.964Z,1478869700.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:21.060Z,1478869701.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:21.372Z,1478869701.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:21.540Z,1478869701.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:21.773Z,1478869701.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:22.161Z,1478869702.161 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T13:08:22.161Z,1478869702.161 [BPC1] Data Fault, FailCount= 1
2016-11-11T13:08:22.161Z,1478869702.161 [BPC1](ERROR): Data Fault
2016-11-11T13:08:22.169Z,1478869702.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:22.206Z,1478869702.206 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T13:08:22.336Z,1478869702.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:22.571Z,1478869702.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:22.971Z,1478869702.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:23.132Z,1478869703.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:23.368Z,1478869703.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:23.388Z,1478869703.388 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:08:23.388Z,1478869703.388 [BPC1] No Fault, FailCount= 1
2016-11-11T13:08:23.836Z,1478869703.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:23.888Z,1478869703.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:24.194Z,1478869704.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:24.564Z,1478869704.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:24.684Z,1478869704.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:24.977Z,1478869704.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:25.366Z,1478869705.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:25.481Z,1478869705.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:25.767Z,1478869705.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:25.896Z,1478869705.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:26.171Z,1478869706.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:26.573Z,1478869706.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:26.692Z,1478869706.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:27.002Z,1478869707.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:27.380Z,1478869707.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:27.456Z,1478869707.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:27.779Z,1478869707.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:28.176Z,1478869708.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:28.252Z,1478869708.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:28.566Z,1478869708.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:29.025Z,1478869709.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:29.048Z,1478869709.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:29.367Z,1478869709.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:29.456Z,1478869709.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:29.768Z,1478869709.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:30.176Z,1478869710.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:30.252Z,1478869710.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:30.568Z,1478869710.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:31.040Z,1478869711.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:31.048Z,1478869711.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:31.365Z,1478869711.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:31.456Z,1478869711.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:31.760Z,1478869711.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:32.168Z,1478869712.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:32.252Z,1478869712.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:32.566Z,1478869712.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:33.024Z,1478869713.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:33.048Z,1478869713.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:33.385Z,1478869713.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:33.456Z,1478869713.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:33.769Z,1478869713.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:34.177Z,1478869714.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:34.252Z,1478869714.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:34.569Z,1478869714.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:34.964Z,1478869714.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:35.048Z,1478869715.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:35.360Z,1478869715.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:35.769Z,1478869715.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:35.844Z,1478869715.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:36.189Z,1478869716.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:36.589Z,1478869716.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:36.640Z,1478869716.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:36.969Z,1478869716.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:37.390Z,1478869717.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:37.436Z,1478869717.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:37.760Z,1478869717.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:38.197Z,1478869718.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:38.232Z,1478869718.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:38.594Z,1478869718.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:38.968Z,1478869718.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:39.028Z,1478869719.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:39.387Z,1478869719.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:39.764Z,1478869719.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:39.824Z,1478869719.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:40.165Z,1478869720.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:40.564Z,1478869720.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:40.620Z,1478869720.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:40.973Z,1478869720.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:41.360Z,1478869721.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:41.416Z,1478869721.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:41.763Z,1478869721.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:42.165Z,1478869722.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:42.214Z,1478869722.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:42.564Z,1478869722.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:42.973Z,1478869722.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:43.009Z,1478869723.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:43.369Z,1478869723.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:43.802Z,1478869723.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:43.804Z,1478869723.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:44.163Z,1478869724.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:44.563Z,1478869724.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:44.600Z,1478869724.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:44.969Z,1478869724.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:45.363Z,1478869725.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:45.396Z,1478869725.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:45.765Z,1478869725.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:46.164Z,1478869726.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:46.192Z,1478869726.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:46.565Z,1478869726.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:46.976Z,1478869726.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:46.988Z,1478869726.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:47.365Z,1478869727.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:47.769Z,1478869727.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:47.784Z,1478869727.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:48.165Z,1478869728.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:48.565Z,1478869728.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:48.580Z,1478869728.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:49.376Z,1478869729.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:50.172Z,1478869730.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:50.968Z,1478869730.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:51.764Z,1478869731.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:51.882Z,1478869731.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:52.005Z,1478869732.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:52.374Z,1478869732.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:52.560Z,1478869732.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:52.753Z,1478869732.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:53.181Z,1478869733.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:53.356Z,1478869733.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:53.567Z,1478869733.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:53.953Z,1478869733.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:54.152Z,1478869734.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:54.361Z,1478869734.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:54.744Z,1478869734.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:54.948Z,1478869734.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:55.175Z,1478869735.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:55.549Z,1478869735.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:55.744Z,1478869735.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:55.952Z,1478869735.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:56.377Z,1478869736.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:56.420Z,1478869736.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:56.758Z,1478869736.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:56.828Z,1478869736.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:57.157Z,1478869737.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:57.236Z,1478869737.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:57.550Z,1478869737.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:57.648Z,1478869737.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:57.954Z,1478869737.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:58.056Z,1478869738.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:58.357Z,1478869738.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:58.468Z,1478869738.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:58.754Z,1478869738.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:58.876Z,1478869738.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:59.152Z,1478869739.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:59.284Z,1478869739.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:59.549Z,1478869739.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:08:59.692Z,1478869739.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:08:59.957Z,1478869739.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:00.100Z,1478869740.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:00.357Z,1478869740.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:00.508Z,1478869740.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:00.757Z,1478869740.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:00.917Z,1478869740.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:01.179Z,1478869741.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:01.328Z,1478869741.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:01.553Z,1478869741.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:01.736Z,1478869741.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:01.965Z,1478869741.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:02.355Z,1478869742.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:02.534Z,1478869742.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:02.759Z,1478869742.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:03.158Z,1478869743.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:03.328Z,1478869743.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:03.553Z,1478869743.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:03.736Z,1478869743.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:03.954Z,1478869743.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:04.364Z,1478869744.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:04.532Z,1478869744.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:04.765Z,1478869744.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:05.161Z,1478869745.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:05.328Z,1478869745.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:05.629Z,1478869745.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:05.836Z,1478869745.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:05.955Z,1478869745.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:06.354Z,1478869746.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:06.632Z,1478869746.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:06.790Z,1478869746.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:07.150Z,1478869747.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:07.431Z,1478869747.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:07.593Z,1478869747.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:07.840Z,1478869747.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:07.994Z,1478869747.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:08.357Z,1478869748.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:08.636Z,1478869748.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:08.752Z,1478869748.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:09.161Z,1478869749.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:09.332Z,1478869749.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:09.553Z,1478869749.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:09.955Z,1478869749.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:10.128Z,1478869750.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:10.365Z,1478869750.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:10.752Z,1478869750.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:10.925Z,1478869750.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:11.164Z,1478869751.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:11.368Z,1478869751.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:11.564Z,1478869751.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:11.963Z,1478869751.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:12.164Z,1478869752.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:12.357Z,1478869752.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:12.765Z,1478869752.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:12.960Z,1478869752.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:13.160Z,1478869753.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:13.368Z,1478869753.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:13.564Z,1478869753.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:13.963Z,1478869753.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:14.164Z,1478869754.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:14.363Z,1478869754.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:14.763Z,1478869754.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:14.960Z,1478869754.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:15.165Z,1478869755.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:15.368Z,1478869755.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:15.563Z,1478869755.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:15.978Z,1478869755.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:16.164Z,1478869756.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:16.349Z,1478869756.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:16.749Z,1478869756.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:16.960Z,1478869756.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:17.181Z,1478869757.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:17.444Z,1478869757.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:17.551Z,1478869757.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:17.961Z,1478869757.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:18.240Z,1478869758.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:18.356Z,1478869758.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:18.761Z,1478869758.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:19.036Z,1478869759.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:19.161Z,1478869759.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:19.585Z,1478869759.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:19.784Z,1478869759.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:19.992Z,1478869759.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:20.344Z,1478869760.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:20.580Z,1478869760.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:20.785Z,1478869760.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:21.167Z,1478869761.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:21.377Z,1478869761.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:21.575Z,1478869761.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:21.788Z,1478869761.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:21.981Z,1478869761.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:22.348Z,1478869762.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:22.584Z,1478869762.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:22.753Z,1478869762.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:23.161Z,1478869763.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:23.316Z,1478869763.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:23.551Z,1478869763.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:23.961Z,1478869763.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:24.112Z,1478869764.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:24.356Z,1478869764.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:24.754Z,1478869764.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:24.909Z,1478869764.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:25.157Z,1478869765.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:25.320Z,1478869765.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:25.556Z,1478869765.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:25.962Z,1478869765.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:26.116Z,1478869766.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:26.362Z,1478869766.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:26.748Z,1478869766.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:26.920Z,1478869766.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:27.172Z,1478869767.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:27.336Z,1478869767.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:27.551Z,1478869767.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:27.961Z,1478869767.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:28.132Z,1478869768.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:28.361Z,1478869768.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:28.751Z,1478869768.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:28.929Z,1478869768.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:29.159Z,1478869769.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:29.340Z,1478869769.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:29.552Z,1478869769.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:29.966Z,1478869769.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:30.136Z,1478869770.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:30.354Z,1478869770.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:30.757Z,1478869770.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:30.932Z,1478869770.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:31.164Z,1478869771.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:31.408Z,1478869771.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:31.562Z,1478869771.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:31.972Z,1478869771.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:32.204Z,1478869772.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:32.373Z,1478869772.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:32.769Z,1478869772.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:32.000Z,1478869773.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:33.169Z,1478869773.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:33.573Z,1478869773.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:33.776Z,1478869773.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:33.977Z,1478869773.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:34.387Z,1478869774.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:34.572Z,1478869774.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:34.755Z,1478869774.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:35.190Z,1478869775.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:35.369Z,1478869775.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:35.562Z,1478869775.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:35.784Z,1478869775.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:35.995Z,1478869775.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:36.390Z,1478869776.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:36.580Z,1478869776.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:36.762Z,1478869776.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:37.155Z,1478869777.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:37.296Z,1478869777.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:37.557Z,1478869777.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:37.961Z,1478869777.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:38.092Z,1478869778.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:38.361Z,1478869778.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:38.753Z,1478869778.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:38.889Z,1478869778.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:39.160Z,1478869779.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:39.300Z,1478869779.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:39.553Z,1478869779.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:39.965Z,1478869779.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:40.096Z,1478869780.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:40.363Z,1478869780.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:40.760Z,1478869780.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:40.901Z,1478869780.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:41.153Z,1478869781.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:41.322Z,1478869781.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:41.550Z,1478869781.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:41.957Z,1478869781.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:42.116Z,1478869782.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:42.351Z,1478869782.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:42.757Z,1478869782.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:42.912Z,1478869782.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:43.161Z,1478869783.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:43.320Z,1478869783.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:43.557Z,1478869783.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:43.976Z,1478869783.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:44.116Z,1478869784.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:44.356Z,1478869784.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:44.757Z,1478869784.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:44.912Z,1478869784.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:45.156Z,1478869785.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:45.384Z,1478869785.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:45.572Z,1478869785.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:45.948Z,1478869785.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:46.180Z,1478869786.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:46.351Z,1478869786.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:46.755Z,1478869786.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:46.976Z,1478869786.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:47.157Z,1478869787.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:47.558Z,1478869787.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:47.744Z,1478869787.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:47.955Z,1478869787.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:48.377Z,1478869788.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:48.540Z,1478869788.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:48.825Z,1478869788.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:49.337Z,1478869789.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:49.756Z,1478869789.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:50.552Z,1478869790.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:51.272Z,1478869791.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:52.068Z,1478869792.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:52.284Z,1478869792.284 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:52.284Z,1478869792.284 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 147
2016-11-11T13:09:52.284Z,1478869792.284 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:09:52.308Z,1478869792.308 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:52.308Z,1478869792.308 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 147
2016-11-11T13:09:52.308Z,1478869792.308 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:09:52.310Z,1478869792.310 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:52.311Z,1478869792.311 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 147
2016-11-11T13:09:52.311Z,1478869792.311 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:09:52.342Z,1478869792.342 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:09:52.342Z,1478869792.342 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:09:52.342Z,1478869792.342 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:09:52.461Z,1478869792.461 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:09:52.461Z,1478869792.461 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 147
2016-11-11T13:09:52.461Z,1478869792.461 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:09:52.461Z,1478869792.461 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 147
2016-11-11T13:09:52.462Z,1478869792.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:09:52.462Z,1478869792.462 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 147
2016-11-11T13:09:52.818Z,1478869792.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:09:52.818Z,1478869792.818 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:09:52.818Z,1478869792.819 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:09:52.823Z,1478869792.823 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:09:52.824Z,1478869792.824 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:09:52.824Z,1478869792.824 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:09:52.825Z,1478869792.825 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:09:52.825Z,1478869792.825 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:09:52.825Z,1478869792.825 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:09:52.869Z,1478869792.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:53.213Z,1478869793.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:53.280Z,1478869793.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:53.621Z,1478869793.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:54.033Z,1478869794.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:54.076Z,1478869794.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:54.382Z,1478869794.382 [PNI_TCM](ERROR): CRC does not match. Expected:0x20322 got:0x16913
2016-11-11T13:09:54.413Z,1478869794.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:54.802Z,1478869794.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:54.872Z,1478869794.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:55.201Z,1478869795.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:55.288Z,1478869795.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:55.596Z,1478869795.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:56.001Z,1478869796.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:56.084Z,1478869796.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:56.401Z,1478869796.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:56.795Z,1478869796.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:56.881Z,1478869796.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:57.210Z,1478869797.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:57.292Z,1478869797.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:57.619Z,1478869797.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:57.991Z,1478869797.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:58.088Z,1478869798.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:58.392Z,1478869798.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:58.805Z,1478869798.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:58.884Z,1478869798.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:59.199Z,1478869799.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:59.376Z,1478869799.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:09:59.600Z,1478869799.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:09:59.994Z,1478869799.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:00.172Z,1478869800.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:00.414Z,1478869800.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:00.799Z,1478869800.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:00.968Z,1478869800.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:01.201Z,1478869801.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:01.610Z,1478869801.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:01.724Z,1478869801.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:01.999Z,1478869801.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:02.406Z,1478869802.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:02.520Z,1478869802.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:02.800Z,1478869802.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:03.204Z,1478869803.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:03.317Z,1478869803.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:03.605Z,1478869803.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:03.728Z,1478869803.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:04.005Z,1478869804.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:04.407Z,1478869804.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:04.524Z,1478869804.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:04.804Z,1478869804.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:05.191Z,1478869805.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:05.260Z,1478869805.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:05.613Z,1478869805.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:06.037Z,1478869806.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:06.056Z,1478869806.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:06.441Z,1478869806.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:06.804Z,1478869806.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:06.853Z,1478869806.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:07.233Z,1478869807.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:07.264Z,1478869807.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:07.614Z,1478869807.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:08.025Z,1478869808.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:08.060Z,1478869808.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:08.422Z,1478869808.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:08.842Z,1478869808.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:08.857Z,1478869808.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:09.198Z,1478869809.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:09.268Z,1478869809.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:09.605Z,1478869809.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:10.001Z,1478869810.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:10.064Z,1478869810.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:10.404Z,1478869810.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:10.845Z,1478869810.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:10.860Z,1478869810.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:11.213Z,1478869811.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:11.272Z,1478869811.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:11.609Z,1478869811.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:11.994Z,1478869811.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:12.068Z,1478869812.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:12.417Z,1478869812.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:12.805Z,1478869812.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:12.864Z,1478869812.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:13.201Z,1478869813.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:13.340Z,1478869813.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:13.595Z,1478869813.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:13.998Z,1478869813.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:14.136Z,1478869814.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:14.401Z,1478869814.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:14.796Z,1478869814.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:14.932Z,1478869814.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:15.196Z,1478869815.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:15.604Z,1478869815.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:15.708Z,1478869815.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:16.001Z,1478869816.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:16.402Z,1478869816.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:16.504Z,1478869816.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:16.805Z,1478869816.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:17.204Z,1478869817.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:17.301Z,1478869817.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:17.596Z,1478869817.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:17.712Z,1478869817.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:17.997Z,1478869817.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:18.395Z,1478869818.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:18.508Z,1478869818.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:18.868Z,1478869818.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:19.199Z,1478869819.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:19.244Z,1478869819.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:19.598Z,1478869819.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:20.025Z,1478869820.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:20.040Z,1478869820.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:20.441Z,1478869820.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:20.836Z,1478869820.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:20.853Z,1478869820.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:21.229Z,1478869821.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:21.248Z,1478869821.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:21.605Z,1478869821.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:22.030Z,1478869822.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:22.044Z,1478869822.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:22.429Z,1478869822.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:22.840Z,1478869822.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:22.867Z,1478869822.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:23.201Z,1478869823.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:23.252Z,1478869823.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:23.595Z,1478869823.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:24.002Z,1478869824.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:24.048Z,1478869824.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:24.401Z,1478869824.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:24.844Z,1478869824.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:24.868Z,1478869824.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:25.204Z,1478869825.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:25.252Z,1478869825.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:25.594Z,1478869825.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:26.001Z,1478869826.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:26.048Z,1478869826.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:26.401Z,1478869826.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:26.801Z,1478869826.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:26.844Z,1478869826.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:27.200Z,1478869827.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:27.326Z,1478869827.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:27.599Z,1478869827.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:28.001Z,1478869828.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:28.121Z,1478869828.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:28.396Z,1478869828.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:28.801Z,1478869828.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:28.916Z,1478869828.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:29.201Z,1478869829.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:29.609Z,1478869829.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:29.704Z,1478869829.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:30.022Z,1478869830.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:30.392Z,1478869830.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:30.500Z,1478869830.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:30.791Z,1478869830.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:31.195Z,1478869831.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:31.296Z,1478869831.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:31.595Z,1478869831.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:31.708Z,1478869831.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:31.995Z,1478869831.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:32.394Z,1478869832.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:32.504Z,1478869832.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:32.867Z,1478869832.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:33.198Z,1478869833.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:33.232Z,1478869833.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:33.607Z,1478869833.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:34.005Z,1478869834.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:34.028Z,1478869834.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:34.422Z,1478869834.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:34.825Z,1478869834.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:34.901Z,1478869834.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:35.207Z,1478869835.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:35.240Z,1478869835.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:35.600Z,1478869835.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:36.014Z,1478869836.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:36.036Z,1478869836.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:36.427Z,1478869836.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:36.832Z,1478869836.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:36.846Z,1478869836.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:37.218Z,1478869837.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:37.240Z,1478869837.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:37.629Z,1478869837.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:37.995Z,1478869837.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:38.036Z,1478869838.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:38.398Z,1478869838.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:38.832Z,1478869838.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:38.859Z,1478869838.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:39.208Z,1478869839.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:39.240Z,1478869839.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:39.617Z,1478869839.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:39.993Z,1478869839.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:40.036Z,1478869840.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:40.393Z,1478869840.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:40.800Z,1478869840.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:40.832Z,1478869840.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:41.201Z,1478869841.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:41.300Z,1478869841.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:41.599Z,1478869841.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:42.005Z,1478869842.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:42.096Z,1478869842.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:42.394Z,1478869842.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:42.795Z,1478869842.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:42.892Z,1478869842.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:43.199Z,1478869843.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:43.604Z,1478869843.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:43.672Z,1478869843.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:43.997Z,1478869843.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:44.404Z,1478869844.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:44.468Z,1478869844.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:44.797Z,1478869844.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:45.198Z,1478869845.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:45.264Z,1478869845.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:45.609Z,1478869845.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:45.676Z,1478869845.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:46.007Z,1478869846.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:46.408Z,1478869846.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:46.472Z,1478869846.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:46.851Z,1478869846.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:47.214Z,1478869847.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:47.228Z,1478869847.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:47.608Z,1478869847.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:47.991Z,1478869847.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:48.024Z,1478869848.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:48.393Z,1478869848.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:48.820Z,1478869848.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:48.874Z,1478869848.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:49.228Z,1478869849.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:50.024Z,1478869850.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:50.820Z,1478869850.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:51.228Z,1478869851.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:52.024Z,1478869852.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:52.259Z,1478869852.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:52.381Z,1478869852.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:52.812Z,1478869852.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:52.820Z,1478869852.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:53.189Z,1478869853.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:53.228Z,1478869853.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:53.553Z,1478869853.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:53.973Z,1478869853.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:54.024Z,1478869854.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:54.366Z,1478869854.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:54.756Z,1478869854.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:54.820Z,1478869854.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:55.156Z,1478869855.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:55.276Z,1478869855.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:55.559Z,1478869855.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:55.956Z,1478869855.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:56.072Z,1478869856.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:56.359Z,1478869856.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:56.759Z,1478869856.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:56.868Z,1478869856.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:57.156Z,1478869857.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:57.545Z,1478869857.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:57.648Z,1478869857.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:57.943Z,1478869857.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:58.343Z,1478869858.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:58.444Z,1478869858.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:58.746Z,1478869858.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:59.153Z,1478869859.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:59.240Z,1478869859.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:59.559Z,1478869859.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:10:59.652Z,1478869859.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:10:59.964Z,1478869859.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:00.359Z,1478869860.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:00.448Z,1478869860.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:00.810Z,1478869860.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:01.173Z,1478869861.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:01.188Z,1478869861.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:01.548Z,1478869861.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:01.947Z,1478869861.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:01.984Z,1478869861.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:02.356Z,1478869862.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:02.781Z,1478869862.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:02.820Z,1478869862.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:03.164Z,1478869863.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:03.192Z,1478869863.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:03.565Z,1478869863.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:03.943Z,1478869863.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:03.988Z,1478869863.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:04.348Z,1478869864.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:04.784Z,1478869864.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:04.802Z,1478869864.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:05.151Z,1478869865.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:05.192Z,1478869865.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:05.548Z,1478869865.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:05.985Z,1478869865.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:05.988Z,1478869865.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:06.381Z,1478869866.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:06.784Z,1478869866.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:06.817Z,1478869866.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:07.147Z,1478869867.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:07.192Z,1478869867.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:07.549Z,1478869867.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:07.947Z,1478869867.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:07.988Z,1478869867.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:08.353Z,1478869868.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:08.747Z,1478869868.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:08.784Z,1478869868.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:09.166Z,1478869869.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:09.260Z,1478869869.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:09.538Z,1478869869.538 [BPC1](ERROR): Failed to receive battery data
2016-11-11T13:11:09.538Z,1478869869.538 [BPC1] Communications Fault, FailCount= 1
2016-11-11T13:11:09.538Z,1478869869.538 [BPC1](ERROR): Communications Fault
2016-11-11T13:11:09.553Z,1478869869.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:09.613Z,1478869869.613 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T13:11:09.952Z,1478869869.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:10.056Z,1478869870.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:10.347Z,1478869870.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:10.746Z,1478869870.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:10.766Z,1478869870.766 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:11:10.766Z,1478869870.766 [BPC1] No Fault, FailCount= 1
2016-11-11T13:11:10.852Z,1478869870.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:11.278Z,1478869871.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:11.581Z,1478869871.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:11.640Z,1478869871.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:11.947Z,1478869871.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:12.348Z,1478869872.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:12.436Z,1478869872.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:12.753Z,1478869872.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:13.155Z,1478869873.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:13.232Z,1478869873.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:13.550Z,1478869873.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:13.644Z,1478869873.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:13.950Z,1478869873.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:14.348Z,1478869874.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:14.440Z,1478869874.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:14.790Z,1478869874.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:15.145Z,1478869875.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:15.196Z,1478869875.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:15.545Z,1478869875.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:15.944Z,1478869875.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:15.992Z,1478869875.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:16.346Z,1478869876.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:16.789Z,1478869876.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:16.840Z,1478869876.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:17.155Z,1478869877.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:17.196Z,1478869877.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:17.547Z,1478869877.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:17.953Z,1478869877.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:17.992Z,1478869877.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:18.352Z,1478869878.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:18.788Z,1478869878.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:18.796Z,1478869878.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:19.157Z,1478869879.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:19.196Z,1478869879.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:19.554Z,1478869879.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:19.949Z,1478869879.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:19.992Z,1478869879.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:20.355Z,1478869880.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:20.788Z,1478869880.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:20.817Z,1478869880.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:21.165Z,1478869881.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:21.196Z,1478869881.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:21.545Z,1478869881.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:21.952Z,1478869881.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:21.992Z,1478869881.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:22.386Z,1478869882.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:22.747Z,1478869882.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:22.788Z,1478869882.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:23.156Z,1478869883.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:23.244Z,1478869883.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:23.552Z,1478869883.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:23.988Z,1478869883.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:24.040Z,1478869884.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:24.350Z,1478869884.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:24.793Z,1478869884.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:24.836Z,1478869884.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:25.221Z,1478869885.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:25.554Z,1478869885.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:25.612Z,1478869885.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:25.960Z,1478869885.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:26.360Z,1478869886.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:26.408Z,1478869886.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:26.757Z,1478869886.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:27.201Z,1478869887.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:27.204Z,1478869887.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:27.561Z,1478869887.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:27.616Z,1478869887.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:27.968Z,1478869887.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:28.353Z,1478869888.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:28.412Z,1478869888.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:28.791Z,1478869888.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:29.143Z,1478869889.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:29.180Z,1478869889.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:29.548Z,1478869889.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:29.953Z,1478869889.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:29.976Z,1478869889.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:30.347Z,1478869890.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:30.772Z,1478869890.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:30.793Z,1478869890.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:31.153Z,1478869891.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:31.180Z,1478869891.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:31.557Z,1478869891.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:31.950Z,1478869891.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:31.976Z,1478869891.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:32.356Z,1478869892.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:32.772Z,1478869892.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:32.805Z,1478869892.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:33.150Z,1478869893.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:33.180Z,1478869893.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:33.557Z,1478869893.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:33.975Z,1478869893.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:33.976Z,1478869893.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:34.348Z,1478869894.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:34.772Z,1478869894.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:34.785Z,1478869894.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:35.157Z,1478869895.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:35.180Z,1478869895.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:35.544Z,1478869895.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:35.976Z,1478869895.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:35.993Z,1478869895.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:36.346Z,1478869896.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:36.747Z,1478869896.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:36.772Z,1478869896.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:37.185Z,1478869897.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:37.224Z,1478869897.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:37.545Z,1478869897.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:37.943Z,1478869897.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:38.020Z,1478869898.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:38.381Z,1478869898.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:38.749Z,1478869898.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:38.816Z,1478869898.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:39.212Z,1478869899.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:39.573Z,1478869899.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:39.580Z,1478869899.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:39.958Z,1478869899.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:40.357Z,1478869900.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:40.376Z,1478869900.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:40.755Z,1478869900.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:41.173Z,1478869901.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:41.213Z,1478869901.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:41.569Z,1478869901.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:41.584Z,1478869901.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:41.949Z,1478869901.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:42.343Z,1478869902.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:42.380Z,1478869902.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:42.776Z,1478869902.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:43.100Z,1478869903.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:43.160Z,1478869903.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:43.546Z,1478869903.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:43.896Z,1478869903.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:43.949Z,1478869903.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:44.347Z,1478869904.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:44.693Z,1478869904.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:44.788Z,1478869904.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:45.113Z,1478869905.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:45.152Z,1478869905.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:45.557Z,1478869905.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:45.908Z,1478869905.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:45.962Z,1478869905.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:46.353Z,1478869906.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:46.705Z,1478869906.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:46.808Z,1478869906.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:47.116Z,1478869907.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:47.141Z,1478869907.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:47.544Z,1478869907.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:47.912Z,1478869907.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:47.945Z,1478869907.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:48.347Z,1478869908.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:48.371Z,1478869908.372 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T13:11:48.372Z,1478869908.372 [Default:CheckIn:C.Wait] Stopped
2016-11-11T13:11:48.372Z,1478869908.372 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T13:11:48.372Z,1478869908.372 [Default:CheckIn:D] Running Loop=1
2016-11-11T13:11:48.709Z,1478869908.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:48.794Z,1478869908.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:48.811Z,1478869908.811 [Default:CheckIn:D] Stopped
2016-11-11T13:11:48.811Z,1478869908.811 [Default:CheckIn:E] Running Loop=1
2016-11-11T13:11:49.122Z,1478869909.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:49.154Z,1478869909.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:49.182Z,1478869909.182 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 501.791667 min 
2016-11-11T13:11:49.182Z,1478869909.182 [Default:CheckIn:E] Stopped
2016-11-11T13:11:49.182Z,1478869909.182 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T13:11:49.182Z,1478869909.182 [Default:CheckIn] Stopped
2016-11-11T13:11:49.182Z,1478869909.182 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T13:11:49.183Z,1478869909.183 [Default:CheckIn](INFO): Running loop #49
2016-11-11T13:11:49.183Z,1478869909.183 [Default:CheckIn] Running Loop=49
2016-11-11T13:11:49.183Z,1478869909.183 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T13:11:49.183Z,1478869909.183 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T13:11:49.916Z,1478869909.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:50.712Z,1478869910.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:51.196Z,1478869911.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:51.992Z,1478869911.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:52.574Z,1478869912.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:52.645Z,1478869912.645 [NAL9602](INFO): Powering up
2016-11-11T13:11:52.696Z,1478869912.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:52.788Z,1478869912.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:53.095Z,1478869913.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:53.525Z,1478869913.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:53.552Z,1478869913.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:53.894Z,1478869913.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:54.333Z,1478869914.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:54.348Z,1478869914.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:54.723Z,1478869914.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:55.088Z,1478869915.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:55.145Z,1478869915.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:55.496Z,1478869915.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:55.560Z,1478869915.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:55.894Z,1478869915.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:56.296Z,1478869916.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:56.356Z,1478869916.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:56.741Z,1478869916.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:57.093Z,1478869917.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:57.124Z,1478869917.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:57.517Z,1478869917.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:57.889Z,1478869917.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:57.920Z,1478869917.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:58.296Z,1478869918.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:58.716Z,1478869918.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:58.744Z,1478869918.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:59.093Z,1478869919.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:59.124Z,1478869919.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:11:59.499Z,1478869919.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:59.899Z,1478869919.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:11:59.920Z,1478869919.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:00.289Z,1478869920.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:00.716Z,1478869920.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:00.748Z,1478869920.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:01.110Z,1478869921.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:01.124Z,1478869921.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:01.490Z,1478869921.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:01.880Z,1478869921.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:01.920Z,1478869921.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:02.286Z,1478869922.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:02.716Z,1478869922.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:02.776Z,1478869922.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:03.102Z,1478869923.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:03.124Z,1478869923.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:03.449Z,1478869923.449 [NAL9602](INFO): NAL9602 initialized
2016-11-11T13:12:03.492Z,1478869923.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:03.897Z,1478869923.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:03.920Z,1478869923.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:04.253Z,1478869924.253 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T13:12:04.253Z,1478869924.253 [NAL9602] Data Fault, FailCount= 3
2016-11-11T13:12:04.253Z,1478869924.253 [NAL9602](ERROR): Data Fault
2016-11-11T13:12:04.304Z,1478869924.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:04.346Z,1478869924.346 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T13:12:04.649Z,1478869924.648 [NAL9602](INFO): Powering down
2016-11-11T13:12:04.702Z,1478869924.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:04.717Z,1478869924.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:05.085Z,1478869925.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:05.180Z,1478869925.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:05.527Z,1478869925.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:05.563Z,1478869925.563 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T13:12:05.563Z,1478869925.563 [NAL9602] No Fault, FailCount= 3
2016-11-11T13:12:05.888Z,1478869925.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:05.976Z,1478869925.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:06.286Z,1478869926.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:06.706Z,1478869926.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:06.772Z,1478869926.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:07.168Z,1478869927.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:07.488Z,1478869927.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:07.532Z,1478869927.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:07.917Z,1478869927.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:08.287Z,1478869928.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:08.328Z,1478869928.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:08.722Z,1478869928.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:09.124Z,1478869929.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:09.166Z,1478869929.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:09.489Z,1478869929.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:09.544Z,1478869929.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:09.849Z,1478869929.849 [NAL9602](INFO): Powering up NAL9602
2016-11-11T13:12:09.900Z,1478869929.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:10.292Z,1478869930.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:10.340Z,1478869930.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:10.722Z,1478869930.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:11.099Z,1478869931.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:11.104Z,1478869931.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:11.499Z,1478869931.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:11.892Z,1478869931.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:11.900Z,1478869931.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:12.307Z,1478869932.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:12.696Z,1478869932.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:12.721Z,1478869932.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:13.101Z,1478869933.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:13.104Z,1478869933.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:13.489Z,1478869933.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:13.900Z,1478869933.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:13.921Z,1478869933.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:14.321Z,1478869934.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:14.696Z,1478869934.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:14.737Z,1478869934.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:15.087Z,1478869935.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:15.104Z,1478869935.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:15.488Z,1478869935.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:15.897Z,1478869935.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:15.900Z,1478869935.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:16.297Z,1478869936.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:16.696Z,1478869936.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:16.711Z,1478869936.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:17.100Z,1478869937.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:17.112Z,1478869937.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:17.500Z,1478869937.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:17.901Z,1478869937.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:17.908Z,1478869937.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:18.285Z,1478869938.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:18.684Z,1478869938.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:18.704Z,1478869938.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:19.094Z,1478869939.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:19.160Z,1478869939.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:19.513Z,1478869939.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:19.890Z,1478869939.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:19.956Z,1478869939.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:20.299Z,1478869940.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:20.705Z,1478869940.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:20.752Z,1478869940.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:21.049Z,1478869941.049 [NAL9602](INFO): NAL9602 initialized
2016-11-11T13:12:21.185Z,1478869941.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:21.493Z,1478869941.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:21.520Z,1478869941.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:21.895Z,1478869941.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:22.316Z,1478869942.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:22.325Z,1478869942.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:22.736Z,1478869942.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:23.112Z,1478869943.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:23.214Z,1478869943.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:23.508Z,1478869943.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:23.528Z,1478869943.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:23.934Z,1478869943.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:24.324Z,1478869944.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:24.328Z,1478869944.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:24.734Z,1478869944.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:25.056Z,1478869945.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:25.140Z,1478869945.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:25.522Z,1478869945.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:25.855Z,1478869945.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:25.910Z,1478869945.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:26.306Z,1478869946.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:26.648Z,1478869946.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:26.753Z,1478869946.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:27.062Z,1478869947.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:27.128Z,1478869947.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:27.495Z,1478869947.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:27.862Z,1478869947.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:27.910Z,1478869947.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:28.308Z,1478869948.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:28.657Z,1478869948.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:28.732Z,1478869948.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:29.068Z,1478869949.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:29.117Z,1478869949.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:29.503Z,1478869949.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:29.864Z,1478869949.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:29.899Z,1478869949.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:30.313Z,1478869950.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:30.660Z,1478869950.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:30.785Z,1478869950.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:31.068Z,1478869951.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:31.129Z,1478869951.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:31.493Z,1478869951.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:31.864Z,1478869951.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:31.895Z,1478869951.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:32.329Z,1478869952.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:32.660Z,1478869952.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:32.772Z,1478869952.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:33.101Z,1478869953.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:33.136Z,1478869953.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:33.513Z,1478869953.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:33.904Z,1478869953.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:33.932Z,1478869953.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:34.308Z,1478869954.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:34.736Z,1478869954.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:34.777Z,1478869954.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:35.189Z,1478869955.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:35.492Z,1478869955.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:35.497Z,1478869955.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:35.929Z,1478869955.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:36.288Z,1478869956.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:36.316Z,1478869956.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:36.700Z,1478869956.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:37.084Z,1478869957.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:37.186Z,1478869957.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:37.493Z,1478869957.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:37.536Z,1478869957.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:37.926Z,1478869957.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:38.332Z,1478869958.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:38.335Z,1478869958.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:38.719Z,1478869958.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:39.012Z,1478869959.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:39.144Z,1478869959.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:39.494Z,1478869959.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:39.808Z,1478869959.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:39.905Z,1478869959.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:40.305Z,1478869960.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:40.605Z,1478869960.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:40.730Z,1478869960.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:41.016Z,1478869961.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:41.136Z,1478869961.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:41.524Z,1478869961.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:41.812Z,1478869961.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:41.918Z,1478869961.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:42.321Z,1478869962.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:42.609Z,1478869962.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:42.710Z,1478869962.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:43.029Z,1478869963.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:43.102Z,1478869963.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:43.512Z,1478869963.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:43.824Z,1478869963.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:43.901Z,1478869963.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:44.293Z,1478869964.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:44.621Z,1478869964.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:44.725Z,1478869964.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:45.032Z,1478869965.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:45.094Z,1478869965.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:45.506Z,1478869965.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:45.828Z,1478869965.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:45.910Z,1478869965.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:46.313Z,1478869966.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:46.624Z,1478869966.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:46.776Z,1478869966.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:47.109Z,1478869967.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:47.132Z,1478869967.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:47.510Z,1478869967.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:47.932Z,1478869967.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:47.955Z,1478869967.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:48.299Z,1478869968.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:48.683Z,1478869968.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:48.730Z,1478869968.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:49.166Z,1478869969.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:49.504Z,1478869969.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:49.528Z,1478869969.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:50.324Z,1478869970.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:51.120Z,1478869971.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:51.528Z,1478869971.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:52.324Z,1478869972.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:53.004Z,1478869973.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:12:53.429Z,1478869973.429 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:53.430Z,1478869973.430 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 148
2016-11-11T13:12:53.430Z,1478869973.430 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:12:53.445Z,1478869973.445 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:53.445Z,1478869973.445 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 148
2016-11-11T13:12:53.445Z,1478869973.445 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:12:53.451Z,1478869973.451 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:53.451Z,1478869973.451 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 148
2016-11-11T13:12:53.451Z,1478869973.451 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:12:53.478Z,1478869973.478 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:12:53.479Z,1478869973.478 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:12:53.479Z,1478869973.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:12:53.613Z,1478869973.613 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:12:53.613Z,1478869973.613 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 148
2016-11-11T13:12:53.613Z,1478869973.613 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:12:53.613Z,1478869973.614 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 148
2016-11-11T13:12:53.614Z,1478869973.614 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:12:53.614Z,1478869973.614 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 148
2016-11-11T13:12:53.952Z,1478869973.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:12:53.952Z,1478869973.952 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:12:53.952Z,1478869973.953 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:12:53.957Z,1478869973.957 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:12:53.958Z,1478869973.958 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:12:53.958Z,1478869973.958 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:12:53.959Z,1478869973.958 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:12:53.959Z,1478869973.959 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:12:53.959Z,1478869973.959 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:12:54.342Z,1478869974.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:54.785Z,1478869974.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:55.136Z,1478869975.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:55.569Z,1478869975.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:55.976Z,1478869975.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:56.336Z,1478869976.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:56.743Z,1478869976.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:57.139Z,1478869977.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:57.580Z,1478869977.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:57.937Z,1478869977.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:58.338Z,1478869978.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:58.741Z,1478869978.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:59.144Z,1478869979.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:59.535Z,1478869979.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:12:59.941Z,1478869979.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:00.340Z,1478869980.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:00.752Z,1478869980.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:01.148Z,1478869981.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:01.541Z,1478869981.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:01.944Z,1478869981.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:02.344Z,1478869982.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:02.753Z,1478869982.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:03.141Z,1478869983.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:03.444Z,1478869983.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:03.545Z,1478869983.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:03.948Z,1478869983.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:04.240Z,1478869984.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:04.352Z,1478869984.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:04.753Z,1478869984.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:05.040Z,1478869985.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:05.159Z,1478869985.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:05.460Z,1478869985.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:05.559Z,1478869985.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:05.933Z,1478869985.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:06.256Z,1478869986.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:06.338Z,1478869986.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:06.783Z,1478869986.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:06.972Z,1478869986.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:07.149Z,1478869987.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:07.538Z,1478869987.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:07.770Z,1478869987.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:07.965Z,1478869987.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:08.345Z,1478869988.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:08.565Z,1478869988.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:08.745Z,1478869988.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:08.980Z,1478869988.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:09.213Z,1478869989.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:09.541Z,1478869989.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:09.776Z,1478869989.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:09.966Z,1478869989.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:10.375Z,1478869990.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:10.573Z,1478869990.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:10.765Z,1478869990.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:10.984Z,1478869990.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:11.105Z,1478869991.105 [NAL9602](INFO): SBD MO Status=2, MOMSN=347, MT Status=2, MTMSN=0
2016-11-11T13:13:11.106Z,1478869991.106 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T13:13:11.138Z,1478869991.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:11.553Z,1478869991.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:11.780Z,1478869991.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:11.944Z,1478869991.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:12.341Z,1478869992.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:12.577Z,1478869992.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:12.744Z,1478869992.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:12.988Z,1478869992.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:13.144Z,1478869993.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:13.541Z,1478869993.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:13.784Z,1478869993.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:13.948Z,1478869993.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:14.348Z,1478869994.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:14.581Z,1478869994.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:14.753Z,1478869994.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:15.064Z,1478869995.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:15.141Z,1478869995.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:15.549Z,1478869995.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:15.860Z,1478869995.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:15.944Z,1478869995.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:16.336Z,1478869996.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:16.658Z,1478869996.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:16.744Z,1478869996.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:17.143Z,1478869997.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:17.420Z,1478869997.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:17.539Z,1478869997.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:17.948Z,1478869997.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:18.218Z,1478869998.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:18.346Z,1478869998.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:18.748Z,1478869998.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:19.013Z,1478869999.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:19.152Z,1478869999.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:19.426Z,1478869999.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:19.543Z,1478869999.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:19.946Z,1478869999.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:20.220Z,1478870000.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:20.350Z,1478870000.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:20.742Z,1478870000.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:20.960Z,1478870000.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:21.174Z,1478870001.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:21.537Z,1478870001.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:21.757Z,1478870001.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:21.946Z,1478870001.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:22.381Z,1478870002.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:22.553Z,1478870002.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:22.748Z,1478870002.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:22.964Z,1478870002.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:23.144Z,1478870003.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:23.562Z,1478870003.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:23.760Z,1478870003.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:23.948Z,1478870003.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:24.360Z,1478870004.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:24.557Z,1478870004.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:24.795Z,1478870004.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:24.968Z,1478870004.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:25.133Z,1478870005.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:25.529Z,1478870005.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:25.764Z,1478870005.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:25.940Z,1478870005.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:26.341Z,1478870006.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:26.561Z,1478870006.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:26.710Z,1478870006.710 [NAL9602](INFO): SBD MO Status=2, MOMSN=347, MT Status=2, MTMSN=0
2016-11-11T13:13:26.710Z,1478870006.710 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T13:13:26.742Z,1478870006.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:26.972Z,1478870006.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:27.149Z,1478870007.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:27.541Z,1478870007.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:27.770Z,1478870007.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:27.938Z,1478870007.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:28.344Z,1478870008.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:28.564Z,1478870008.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:28.747Z,1478870008.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:29.036Z,1478870009.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:29.144Z,1478870009.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:29.544Z,1478870009.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:29.832Z,1478870009.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:29.952Z,1478870009.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:30.375Z,1478870010.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:30.628Z,1478870010.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:30.749Z,1478870010.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:31.157Z,1478870011.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:31.388Z,1478870011.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:31.551Z,1478870011.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:31.962Z,1478870011.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:32.184Z,1478870012.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:32.361Z,1478870012.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:32.736Z,1478870012.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:32.980Z,1478870012.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:33.145Z,1478870013.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:33.392Z,1478870013.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:33.540Z,1478870013.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:33.945Z,1478870013.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:34.188Z,1478870014.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:34.335Z,1478870014.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:34.746Z,1478870014.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:34.916Z,1478870014.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:35.146Z,1478870015.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:35.535Z,1478870015.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:35.712Z,1478870015.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:35.961Z,1478870015.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:36.357Z,1478870016.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:36.509Z,1478870016.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:36.745Z,1478870016.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:36.920Z,1478870016.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:37.200Z,1478870017.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:37.535Z,1478870017.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:37.716Z,1478870017.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:37.979Z,1478870017.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:38.349Z,1478870018.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:38.524Z,1478870018.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:38.781Z,1478870018.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:38.944Z,1478870018.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:39.172Z,1478870019.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:39.536Z,1478870019.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:39.740Z,1478870019.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:39.943Z,1478870019.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:40.336Z,1478870020.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:40.536Z,1478870020.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:40.748Z,1478870020.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:40.944Z,1478870020.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:41.148Z,1478870021.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:41.549Z,1478870021.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:41.740Z,1478870021.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:41.955Z,1478870021.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:42.335Z,1478870022.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:42.536Z,1478870022.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:42.755Z,1478870022.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:43.016Z,1478870023.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:43.153Z,1478870023.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:43.541Z,1478870023.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:43.812Z,1478870023.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:43.946Z,1478870023.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:44.344Z,1478870024.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:44.608Z,1478870024.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:44.745Z,1478870024.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:45.145Z,1478870025.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:45.368Z,1478870025.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:45.548Z,1478870025.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:45.947Z,1478870025.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:46.164Z,1478870026.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:46.348Z,1478870026.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:46.748Z,1478870026.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:46.961Z,1478870026.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:47.148Z,1478870027.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:47.377Z,1478870027.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:47.548Z,1478870027.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:47.950Z,1478870027.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:48.172Z,1478870028.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:48.348Z,1478870028.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:48.748Z,1478870028.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:48.892Z,1478870028.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:49.141Z,1478870029.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:49.552Z,1478870029.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:49.688Z,1478870029.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:50.485Z,1478870030.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:50.896Z,1478870030.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:51.692Z,1478870031.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:52.489Z,1478870032.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:52.900Z,1478870032.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:53.066Z,1478870033.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:53.229Z,1478870033.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:53.610Z,1478870033.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:53.696Z,1478870033.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:54.005Z,1478870034.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:54.365Z,1478870034.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:54.493Z,1478870034.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:54.793Z,1478870034.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:54.904Z,1478870034.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:55.206Z,1478870035.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:55.577Z,1478870035.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:55.700Z,1478870035.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:55.986Z,1478870035.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:56.381Z,1478870036.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:56.496Z,1478870036.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:56.785Z,1478870036.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:56.988Z,1478870036.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:57.173Z,1478870037.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:57.582Z,1478870037.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:57.784Z,1478870037.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:57.990Z,1478870037.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:58.361Z,1478870038.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:58.580Z,1478870038.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:58.765Z,1478870038.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:59.173Z,1478870039.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:59.344Z,1478870039.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:13:59.585Z,1478870039.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:13:59.983Z,1478870039.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:00.140Z,1478870040.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:00.386Z,1478870040.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:00.781Z,1478870040.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:00.937Z,1478870040.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:01.173Z,1478870041.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:01.348Z,1478870041.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:01.582Z,1478870041.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:01.958Z,1478870041.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:02.144Z,1478870042.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:02.358Z,1478870042.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:02.770Z,1478870042.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:02.880Z,1478870042.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:03.172Z,1478870043.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:03.565Z,1478870043.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:03.676Z,1478870043.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:03.971Z,1478870043.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:04.382Z,1478870044.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:04.473Z,1478870044.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:04.788Z,1478870044.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:04.884Z,1478870044.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:05.182Z,1478870045.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:05.590Z,1478870045.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:05.680Z,1478870045.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:05.992Z,1478870045.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:06.361Z,1478870046.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:06.477Z,1478870046.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:06.780Z,1478870046.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:06.888Z,1478870046.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:07.214Z,1478870047.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:07.605Z,1478870047.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:07.684Z,1478870047.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:07.978Z,1478870047.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:08.382Z,1478870048.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:08.481Z,1478870048.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:08.792Z,1478870048.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:08.892Z,1478870048.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:09.206Z,1478870049.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:09.605Z,1478870049.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:09.688Z,1478870049.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:10.004Z,1478870050.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:10.365Z,1478870050.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:10.484Z,1478870050.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:10.774Z,1478870050.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:10.964Z,1478870050.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:11.195Z,1478870051.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:11.569Z,1478870051.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:11.760Z,1478870051.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:11.970Z,1478870051.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:12.389Z,1478870052.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:12.556Z,1478870052.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:12.783Z,1478870052.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:13.233Z,1478870053.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:13.324Z,1478870053.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:13.579Z,1478870053.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:13.985Z,1478870053.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:14.120Z,1478870054.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:14.389Z,1478870054.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:14.802Z,1478870054.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:14.916Z,1478870054.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:15.165Z,1478870055.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:15.328Z,1478870055.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:15.574Z,1478870055.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:15.980Z,1478870055.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:16.124Z,1478870056.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:16.375Z,1478870056.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:16.766Z,1478870056.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:16.852Z,1478870056.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:17.175Z,1478870057.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:17.580Z,1478870057.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:17.648Z,1478870057.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:17.982Z,1478870057.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:18.372Z,1478870058.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:18.445Z,1478870058.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:18.785Z,1478870058.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:18.856Z,1478870058.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:19.186Z,1478870059.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:19.560Z,1478870059.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:19.652Z,1478870059.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:19.965Z,1478870059.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:20.369Z,1478870060.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:20.449Z,1478870060.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:20.775Z,1478870060.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:20.860Z,1478870060.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:21.176Z,1478870061.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:21.637Z,1478870061.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:21.656Z,1478870061.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:21.991Z,1478870061.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:22.438Z,1478870062.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:22.460Z,1478870062.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:22.783Z,1478870062.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:22.872Z,1478870062.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:23.193Z,1478870063.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:23.601Z,1478870063.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:23.668Z,1478870063.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:23.980Z,1478870063.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:24.350Z,1478870064.350 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T13:14:24.386Z,1478870064.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:24.464Z,1478870064.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:24.782Z,1478870064.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:24.944Z,1478870064.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:25.177Z,1478870065.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:25.590Z,1478870065.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:25.740Z,1478870065.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:25.949Z,1478870065.949 [PNI_TCM](ERROR): CRC does not match. Expected:0x15511 got:0x65031
2016-11-11T13:14:26.025Z,1478870066.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:26.406Z,1478870066.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:26.536Z,1478870066.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:26.787Z,1478870066.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:27.197Z,1478870067.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:27.304Z,1478870067.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:27.591Z,1478870067.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:27.981Z,1478870067.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:28.100Z,1478870068.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:28.371Z,1478870068.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:28.766Z,1478870068.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:28.897Z,1478870068.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:29.181Z,1478870069.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:29.308Z,1478870069.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:29.579Z,1478870069.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:29.985Z,1478870069.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:30.104Z,1478870070.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:30.368Z,1478870070.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:30.791Z,1478870070.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:30.840Z,1478870070.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:31.203Z,1478870071.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:31.626Z,1478870071.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:31.636Z,1478870071.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:31.993Z,1478870071.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:32.374Z,1478870072.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:32.433Z,1478870072.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:32.766Z,1478870072.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:32.844Z,1478870072.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:33.170Z,1478870073.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:33.576Z,1478870073.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:33.640Z,1478870073.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:33.966Z,1478870073.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:34.365Z,1478870074.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:34.437Z,1478870074.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:34.783Z,1478870074.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:34.848Z,1478870074.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:35.209Z,1478870075.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:35.609Z,1478870075.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:35.644Z,1478870075.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:36.003Z,1478870076.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:36.430Z,1478870076.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:36.440Z,1478870076.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:36.788Z,1478870076.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:36.852Z,1478870076.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:37.217Z,1478870077.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:37.607Z,1478870077.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:37.656Z,1478870077.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:37.975Z,1478870077.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:38.381Z,1478870078.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:38.452Z,1478870078.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:38.770Z,1478870078.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:38.928Z,1478870078.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:39.182Z,1478870079.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:39.581Z,1478870079.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:39.724Z,1478870079.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:39.975Z,1478870079.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:40.380Z,1478870080.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:40.520Z,1478870080.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:40.757Z,1478870080.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:41.166Z,1478870081.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:41.284Z,1478870081.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:41.573Z,1478870081.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:41.978Z,1478870081.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:42.080Z,1478870082.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:42.380Z,1478870082.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:42.829Z,1478870082.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:42.876Z,1478870082.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:43.167Z,1478870083.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:43.308Z,1478870083.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:43.564Z,1478870083.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:43.962Z,1478870083.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:44.104Z,1478870084.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:44.365Z,1478870084.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:44.781Z,1478870084.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:44.820Z,1478870084.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:45.174Z,1478870085.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:45.571Z,1478870085.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:45.617Z,1478870085.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:45.990Z,1478870085.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:46.413Z,1478870086.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:46.447Z,1478870086.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:46.807Z,1478870086.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:46.844Z,1478870086.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:47.184Z,1478870087.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:47.589Z,1478870087.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:47.640Z,1478870087.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:47.967Z,1478870087.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:48.436Z,1478870088.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:48.454Z,1478870088.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:48.781Z,1478870088.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:48.844Z,1478870088.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:49.184Z,1478870089.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:49.609Z,1478870089.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:49.640Z,1478870089.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:50.436Z,1478870090.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:50.844Z,1478870090.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:51.640Z,1478870091.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:52.436Z,1478870092.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:52.912Z,1478870092.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:53.025Z,1478870093.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:53.137Z,1478870093.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:53.533Z,1478870093.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:53.710Z,1478870093.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:53.975Z,1478870093.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:54.337Z,1478870094.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:54.504Z,1478870094.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:54.757Z,1478870094.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:55.154Z,1478870095.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:55.260Z,1478870095.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:55.553Z,1478870095.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:55.943Z,1478870095.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:56.056Z,1478870096.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:56.347Z,1478870096.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:56.741Z,1478870096.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:56.853Z,1478870096.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:57.153Z,1478870097.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:57.264Z,1478870097.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:57.522Z,1478870097.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:57.923Z,1478870097.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:58.060Z,1478870098.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:58.323Z,1478870098.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:58.743Z,1478870098.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:58.804Z,1478870098.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:59.119Z,1478870099.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:59.549Z,1478870099.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:14:59.600Z,1478870099.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:14:59.989Z,1478870099.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:00.337Z,1478870100.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:00.397Z,1478870100.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:00.737Z,1478870100.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:00.808Z,1478870100.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:01.125Z,1478870101.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:01.525Z,1478870101.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:01.604Z,1478870101.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:01.925Z,1478870101.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:02.390Z,1478870102.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:02.401Z,1478870102.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:02.733Z,1478870102.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:02.812Z,1478870102.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:03.120Z,1478870103.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:03.525Z,1478870103.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:03.609Z,1478870103.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:03.931Z,1478870103.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:04.405Z,1478870104.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:04.406Z,1478870104.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:04.749Z,1478870104.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:04.820Z,1478870104.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:05.139Z,1478870105.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:05.541Z,1478870105.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:05.616Z,1478870105.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:05.937Z,1478870105.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:06.325Z,1478870106.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:06.412Z,1478870106.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:06.729Z,1478870106.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:06.900Z,1478870106.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:07.181Z,1478870107.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:07.526Z,1478870107.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:07.696Z,1478870107.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:07.972Z,1478870107.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:08.334Z,1478870108.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:08.492Z,1478870108.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:08.771Z,1478870108.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:09.180Z,1478870109.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:09.264Z,1478870109.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:09.545Z,1478870109.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:09.937Z,1478870109.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:10.060Z,1478870110.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:10.341Z,1478870110.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:10.737Z,1478870110.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:10.857Z,1478870110.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:11.133Z,1478870111.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:11.268Z,1478870111.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:11.525Z,1478870111.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:11.929Z,1478870111.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:12.064Z,1478870112.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:12.374Z,1478870112.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:12.737Z,1478870112.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:12.788Z,1478870112.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:13.149Z,1478870113.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:13.541Z,1478870113.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:13.584Z,1478870113.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:13.945Z,1478870113.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:14.381Z,1478870114.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:14.408Z,1478870114.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:14.733Z,1478870114.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:14.792Z,1478870114.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:15.128Z,1478870115.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:15.534Z,1478870115.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:15.588Z,1478870115.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:15.939Z,1478870115.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:16.384Z,1478870116.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:16.407Z,1478870116.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:16.736Z,1478870116.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:16.800Z,1478870116.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:17.132Z,1478870117.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:17.532Z,1478870117.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:17.596Z,1478870117.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:17.936Z,1478870117.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:18.381Z,1478870118.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:18.393Z,1478870118.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:18.721Z,1478870118.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:18.800Z,1478870118.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:19.124Z,1478870119.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:19.524Z,1478870119.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:19.596Z,1478870119.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:19.926Z,1478870119.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:20.329Z,1478870120.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:20.392Z,1478870120.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:20.732Z,1478870120.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:20.860Z,1478870120.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:21.133Z,1478870121.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:21.626Z,1478870121.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:21.656Z,1478870121.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:21.927Z,1478870121.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:22.361Z,1478870122.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:22.452Z,1478870122.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:22.723Z,1478870122.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:23.145Z,1478870123.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:23.232Z,1478870123.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:23.549Z,1478870123.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:23.932Z,1478870123.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:24.028Z,1478870124.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:24.321Z,1478870124.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:24.725Z,1478870124.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:24.825Z,1478870124.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:25.121Z,1478870125.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:25.236Z,1478870125.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:25.521Z,1478870125.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:25.943Z,1478870125.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:26.032Z,1478870126.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:26.417Z,1478870126.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:26.729Z,1478870126.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:26.784Z,1478870126.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:27.129Z,1478870127.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:27.524Z,1478870127.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:27.580Z,1478870127.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:27.932Z,1478870127.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:28.376Z,1478870128.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:28.401Z,1478870128.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:28.736Z,1478870128.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:28.784Z,1478870128.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:29.136Z,1478870129.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:29.537Z,1478870129.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:29.580Z,1478870129.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:29.944Z,1478870129.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:30.376Z,1478870130.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:30.394Z,1478870130.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:30.748Z,1478870130.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:30.784Z,1478870130.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:31.152Z,1478870131.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:31.544Z,1478870131.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:31.580Z,1478870131.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:31.921Z,1478870131.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:32.361Z,1478870132.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:32.376Z,1478870132.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:32.726Z,1478870132.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:32.792Z,1478870132.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:33.132Z,1478870133.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:33.536Z,1478870133.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:33.588Z,1478870133.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:33.978Z,1478870133.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:34.341Z,1478870134.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:34.384Z,1478870134.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:34.724Z,1478870134.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:34.836Z,1478870134.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:35.128Z,1478870135.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:35.581Z,1478870135.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:35.632Z,1478870135.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:35.939Z,1478870135.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:36.344Z,1478870136.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:36.428Z,1478870136.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:36.822Z,1478870136.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:37.144Z,1478870137.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:37.208Z,1478870137.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:37.553Z,1478870137.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:37.947Z,1478870137.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:38.004Z,1478870138.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:38.321Z,1478870138.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:38.725Z,1478870138.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:38.800Z,1478870138.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:39.128Z,1478870139.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:39.212Z,1478870139.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:39.534Z,1478870139.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:39.925Z,1478870139.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:40.008Z,1478870140.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:40.402Z,1478870140.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:40.728Z,1478870140.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:40.752Z,1478870140.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:41.137Z,1478870141.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:41.524Z,1478870141.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:41.541Z,1478870141.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:41.924Z,1478870141.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:42.322Z,1478870142.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:42.401Z,1478870142.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:42.733Z,1478870142.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:42.740Z,1478870142.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:43.133Z,1478870143.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:43.531Z,1478870143.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:43.536Z,1478870143.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:43.933Z,1478870143.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:44.333Z,1478870144.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:44.409Z,1478870144.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:44.725Z,1478870144.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:44.744Z,1478870144.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:45.129Z,1478870145.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:45.537Z,1478870145.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:45.548Z,1478870145.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:45.932Z,1478870145.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:46.344Z,1478870146.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:46.405Z,1478870146.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:46.743Z,1478870146.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:46.752Z,1478870146.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:47.133Z,1478870147.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:47.530Z,1478870147.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:47.548Z,1478870147.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:47.933Z,1478870147.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:48.344Z,1478870148.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:48.361Z,1478870148.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:48.729Z,1478870148.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:48.836Z,1478870148.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:49.128Z,1478870149.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:49.529Z,1478870149.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:49.632Z,1478870149.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:49.961Z,1478870149.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:50.428Z,1478870150.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:51.200Z,1478870151.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:51.996Z,1478870151.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:52.792Z,1478870152.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:53.204Z,1478870153.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:53.472Z,1478870153.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:53.625Z,1478870153.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:53.984Z,1478870153.984 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:53.984Z,1478870153.984 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 149
2016-11-11T13:15:53.984Z,1478870153.984 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:15:53.994Z,1478870153.994 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:53.994Z,1478870153.994 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 149
2016-11-11T13:15:53.995Z,1478870153.995 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:15:53.000Z,1478870154.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:54.002Z,1478870154.002 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:54.002Z,1478870154.002 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 149
2016-11-11T13:15:54.002Z,1478870154.002 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:15:54.041Z,1478870154.041 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:15:54.041Z,1478870154.041 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:15:54.041Z,1478870154.041 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:15:54.494Z,1478870154.494 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:15:54.494Z,1478870154.494 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 149
2016-11-11T13:15:54.495Z,1478870154.495 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:15:54.495Z,1478870154.495 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 149
2016-11-11T13:15:54.496Z,1478870154.496 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:15:54.496Z,1478870154.496 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 149
2016-11-11T13:15:54.724Z,1478870154.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:54.748Z,1478870154.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:15:54.748Z,1478870154.748 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:15:54.748Z,1478870154.749 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:15:54.753Z,1478870154.753 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:15:54.754Z,1478870154.754 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:15:54.754Z,1478870154.754 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:15:54.754Z,1478870154.754 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:15:54.759Z,1478870154.759 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:15:54.760Z,1478870154.760 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:15:55.177Z,1478870155.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:55.522Z,1478870155.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:55.585Z,1478870155.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:55.945Z,1478870155.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:56.317Z,1478870156.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:56.378Z,1478870156.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:56.728Z,1478870156.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:56.745Z,1478870156.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:57.152Z,1478870157.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:57.524Z,1478870157.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:57.548Z,1478870157.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:57.959Z,1478870157.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:58.321Z,1478870158.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:58.385Z,1478870158.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:58.740Z,1478870158.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:58.763Z,1478870158.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:59.157Z,1478870159.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:59.207Z,1478870159.207 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T13:15:59.536Z,1478870159.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:15:59.543Z,1478870159.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:15:59.946Z,1478870159.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:00.333Z,1478870160.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:00.385Z,1478870160.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:00.740Z,1478870160.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:00.748Z,1478870160.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:01.146Z,1478870161.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:01.536Z,1478870161.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:01.545Z,1478870161.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:01.953Z,1478870161.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:02.332Z,1478870162.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:02.348Z,1478870162.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:02.756Z,1478870162.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:02.812Z,1478870162.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:03.156Z,1478870163.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:03.556Z,1478870163.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:03.608Z,1478870163.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:03.949Z,1478870163.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:04.357Z,1478870164.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:04.404Z,1478870164.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:04.793Z,1478870164.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:05.140Z,1478870165.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:05.192Z,1478870165.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:05.544Z,1478870165.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:05.950Z,1478870165.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:05.988Z,1478870165.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:06.362Z,1478870166.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:06.784Z,1478870166.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:06.810Z,1478870166.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:07.154Z,1478870167.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:07.192Z,1478870167.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:07.581Z,1478870167.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:07.956Z,1478870167.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:07.992Z,1478870167.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:08.388Z,1478870168.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:08.680Z,1478870168.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:08.757Z,1478870168.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:09.223Z,1478870169.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:09.476Z,1478870169.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:09.589Z,1478870169.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:09.965Z,1478870169.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:10.273Z,1478870170.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:10.380Z,1478870170.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:10.684Z,1478870170.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:10.760Z,1478870170.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:11.141Z,1478870171.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:11.480Z,1478870171.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:11.545Z,1478870171.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:11.949Z,1478870171.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:12.277Z,1478870172.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:12.362Z,1478870172.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:12.688Z,1478870172.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:12.748Z,1478870172.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:13.165Z,1478870173.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:13.484Z,1478870173.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:13.560Z,1478870173.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:13.953Z,1478870173.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:14.281Z,1478870174.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:14.363Z,1478870174.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:14.696Z,1478870174.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:14.765Z,1478870174.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:15.162Z,1478870175.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:15.494Z,1478870175.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:15.541Z,1478870175.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:15.961Z,1478870175.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:16.288Z,1478870176.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:16.409Z,1478870176.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:16.744Z,1478870176.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:16.796Z,1478870176.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:17.148Z,1478870177.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:17.549Z,1478870177.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:17.592Z,1478870177.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:17.949Z,1478870177.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:18.350Z,1478870178.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:18.388Z,1478870178.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:18.795Z,1478870178.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:19.154Z,1478870179.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:19.176Z,1478870179.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:19.554Z,1478870179.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:19.972Z,1478870179.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:19.984Z,1478870179.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:20.356Z,1478870180.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:20.766Z,1478870180.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:20.770Z,1478870180.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:21.148Z,1478870181.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:21.204Z,1478870181.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:21.589Z,1478870181.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:21.000Z,1478870182.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:22.009Z,1478870182.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:22.354Z,1478870182.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:22.660Z,1478870182.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:22.786Z,1478870182.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:23.153Z,1478870183.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:23.456Z,1478870183.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:23.589Z,1478870183.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:23.953Z,1478870183.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:24.253Z,1478870184.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:24.375Z,1478870184.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:24.664Z,1478870184.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:24.780Z,1478870184.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:25.165Z,1478870185.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:25.460Z,1478870185.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:25.541Z,1478870185.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:25.945Z,1478870185.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:26.257Z,1478870186.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:26.347Z,1478870186.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:26.672Z,1478870186.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:26.747Z,1478870186.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:27.148Z,1478870187.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:27.468Z,1478870187.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:27.561Z,1478870187.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:27.939Z,1478870187.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:28.265Z,1478870188.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:28.353Z,1478870188.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:28.676Z,1478870188.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:28.751Z,1478870188.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:29.149Z,1478870189.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:29.474Z,1478870189.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:29.557Z,1478870189.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:29.953Z,1478870189.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:30.268Z,1478870190.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:30.410Z,1478870190.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:30.742Z,1478870190.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:30.788Z,1478870190.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:31.141Z,1478870191.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:31.545Z,1478870191.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:31.584Z,1478870191.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:31.942Z,1478870191.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:32.343Z,1478870192.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:32.380Z,1478870192.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:32.781Z,1478870192.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:33.149Z,1478870193.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:33.192Z,1478870193.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:33.566Z,1478870193.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:33.600Z,1478870193.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:33.957Z,1478870193.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:34.356Z,1478870194.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:34.396Z,1478870194.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:34.824Z,1478870194.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:35.128Z,1478870195.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:35.141Z,1478870195.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:35.541Z,1478870195.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:35.924Z,1478870195.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:35.944Z,1478870195.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:36.394Z,1478870196.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:36.640Z,1478870196.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:36.746Z,1478870196.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:37.183Z,1478870197.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:37.436Z,1478870197.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:37.557Z,1478870197.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:37.989Z,1478870197.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:38.233Z,1478870198.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:38.409Z,1478870198.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:38.644Z,1478870198.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:38.757Z,1478870198.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:39.146Z,1478870199.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:39.440Z,1478870199.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:39.553Z,1478870199.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:39.946Z,1478870199.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:40.237Z,1478870200.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:40.357Z,1478870200.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:40.648Z,1478870200.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:40.748Z,1478870200.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:41.153Z,1478870201.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:41.444Z,1478870201.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:41.552Z,1478870201.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:41.958Z,1478870201.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:42.241Z,1478870202.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:42.385Z,1478870202.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:42.656Z,1478870202.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:42.746Z,1478870202.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:43.149Z,1478870203.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:43.452Z,1478870203.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:43.544Z,1478870203.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:43.966Z,1478870203.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:44.248Z,1478870204.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:44.406Z,1478870204.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:44.748Z,1478870204.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:44.750Z,1478870204.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:45.154Z,1478870205.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:45.544Z,1478870205.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:45.549Z,1478870205.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:45.955Z,1478870205.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:46.340Z,1478870206.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:46.347Z,1478870206.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:46.784Z,1478870206.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:47.092Z,1478870207.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:47.153Z,1478870207.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:47.544Z,1478870207.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:47.888Z,1478870207.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:47.951Z,1478870207.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:48.346Z,1478870208.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:48.685Z,1478870208.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:48.772Z,1478870208.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:49.096Z,1478870209.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:49.155Z,1478870209.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:49.585Z,1478870209.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:49.605Z,1478870209.605 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T13:11:49.2Z
2016-11-11T13:16:49.606Z,1478870209.606 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T13:16:49.606Z,1478870209.606 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T13:16:49.892Z,1478870209.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:49.958Z,1478870209.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:50.620Z,1478870210.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:51.416Z,1478870211.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:52.213Z,1478870212.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:52.628Z,1478870212.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:53.424Z,1478870213.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:53.819Z,1478870213.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:53.872Z,1478870213.872 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0196.lzma
2016-11-11T13:16:53.966Z,1478870213.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:54.221Z,1478870214.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:54.329Z,1478870214.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:54.632Z,1478870214.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:54.677Z,1478870214.677 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0196.lzma.bak
2016-11-11T13:16:54.677Z,1478870214.677 [DataOverHttps](INFO): SBD MOMSN=4555436
2016-11-11T13:16:54.746Z,1478870214.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:55.429Z,1478870215.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:56.114Z,1478870216.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:56.225Z,1478870216.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:56.320Z,1478870216.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:56.640Z,1478870216.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:57.436Z,1478870217.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:58.232Z,1478870218.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:58.720Z,1478870218.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:59.516Z,1478870219.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:16:59.729Z,1478870219.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:16:59.856Z,1478870219.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:00.237Z,1478870220.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:00.312Z,1478870220.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:00.609Z,1478870220.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:01.008Z,1478870221.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:01.068Z,1478870221.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:01.418Z,1478870221.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:01.864Z,1478870221.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:02.660Z,1478870222.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:03.072Z,1478870223.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:03.868Z,1478870223.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:04.604Z,1478870224.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:04.842Z,1478870224.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:04.924Z,1478870224.924 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0197.lzma
2016-11-11T13:17:04.985Z,1478870224.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:05.365Z,1478870225.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:05.400Z,1478870225.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:05.701Z,1478870225.701 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0197.lzma.bak
2016-11-11T13:17:05.701Z,1478870225.701 [DataOverHttps](INFO): SBD MOMSN=4555438
2016-11-11T13:17:05.773Z,1478870225.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:06.197Z,1478870226.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:06.608Z,1478870226.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:07.087Z,1478870227.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:07.096Z,1478870227.096 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T13:17:07.096Z,1478870227.096 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T13:17:07.096Z,1478870227.096 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T13:17:07.225Z,1478870227.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:07.404Z,1478870227.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:08.201Z,1478870228.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:08.613Z,1478870228.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:09.408Z,1478870229.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:10.205Z,1478870230.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:10.620Z,1478870230.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:10.651Z,1478870230.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:10.788Z,1478870230.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:11.225Z,1478870231.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:11.416Z,1478870231.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:11.557Z,1478870231.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:11.957Z,1478870231.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:12.212Z,1478870232.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:12.401Z,1478870232.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:12.684Z,1478870232.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:12.776Z,1478870232.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:13.161Z,1478870233.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:13.480Z,1478870233.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:13.585Z,1478870233.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:13.953Z,1478870233.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:14.276Z,1478870234.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:14.405Z,1478870234.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:14.805Z,1478870234.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:15.044Z,1478870235.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:15.160Z,1478870235.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:15.561Z,1478870235.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:15.840Z,1478870235.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:15.982Z,1478870235.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:16.425Z,1478870236.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:16.636Z,1478870236.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:16.816Z,1478870236.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:17.161Z,1478870237.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:17.432Z,1478870237.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:17.561Z,1478870237.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:17.949Z,1478870237.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:18.228Z,1478870238.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:18.351Z,1478870238.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:18.750Z,1478870238.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:19.025Z,1478870239.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:19.159Z,1478870239.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:19.552Z,1478870239.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:19.820Z,1478870239.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:19.957Z,1478870239.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:20.364Z,1478870240.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:20.616Z,1478870240.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:20.789Z,1478870240.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:21.173Z,1478870241.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:21.412Z,1478870241.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:21.577Z,1478870241.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:21.959Z,1478870241.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:22.208Z,1478870242.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:22.353Z,1478870242.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:22.756Z,1478870242.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:23.004Z,1478870243.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:23.210Z,1478870243.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:23.561Z,1478870243.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:23.800Z,1478870243.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:23.913Z,1478870243.913 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T13:17:23.960Z,1478870243.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:24.362Z,1478870244.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:24.598Z,1478870244.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:24.764Z,1478870244.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:25.193Z,1478870245.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:25.392Z,1478870245.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:25.549Z,1478870245.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:25.953Z,1478870245.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:26.188Z,1478870246.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:26.359Z,1478870246.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:26.825Z,1478870246.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:26.984Z,1478870246.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:27.167Z,1478870247.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:27.588Z,1478870247.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:27.780Z,1478870247.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:27.998Z,1478870247.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:28.398Z,1478870248.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:28.580Z,1478870248.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:28.797Z,1478870248.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:29.186Z,1478870249.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:29.377Z,1478870249.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:29.521Z,1478870249.521 [NAL9602](INFO): Powering down
2016-11-11T13:17:29.609Z,1478870249.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:29.970Z,1478870249.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:30.172Z,1478870250.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:30.380Z,1478870250.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:30.782Z,1478870250.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:30.968Z,1478870250.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:31.158Z,1478870251.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:31.571Z,1478870251.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:31.764Z,1478870251.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:32.034Z,1478870252.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:32.382Z,1478870252.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:32.561Z,1478870252.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:32.926Z,1478870252.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:33.158Z,1478870253.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:33.356Z,1478870253.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:33.589Z,1478870253.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:33.957Z,1478870253.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:34.157Z,1478870254.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:34.374Z,1478870254.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:34.762Z,1478870254.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:34.952Z,1478870254.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:35.169Z,1478870255.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:35.590Z,1478870255.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:35.748Z,1478870255.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:35.957Z,1478870255.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:36.352Z,1478870256.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:36.544Z,1478870256.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:36.762Z,1478870256.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:37.160Z,1478870257.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:37.342Z,1478870257.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:37.559Z,1478870257.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:37.977Z,1478870257.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:38.137Z,1478870258.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:38.384Z,1478870258.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:38.600Z,1478870258.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:38.798Z,1478870258.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:39.008Z,1478870259.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:39.153Z,1478870259.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:39.416Z,1478870259.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:39.604Z,1478870259.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:39.824Z,1478870259.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:39.965Z,1478870259.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:40.233Z,1478870260.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:40.352Z,1478870260.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:40.644Z,1478870260.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:40.753Z,1478870260.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:41.052Z,1478870261.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:41.190Z,1478870261.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:41.460Z,1478870261.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:41.557Z,1478870261.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:41.868Z,1478870261.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:41.992Z,1478870261.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:42.276Z,1478870262.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:42.398Z,1478870262.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:42.684Z,1478870262.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:42.761Z,1478870262.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:43.092Z,1478870263.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:43.212Z,1478870263.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:43.501Z,1478870263.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:43.604Z,1478870263.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:43.948Z,1478870263.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:43.997Z,1478870263.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:44.377Z,1478870264.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:44.752Z,1478870264.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:44.791Z,1478870264.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:45.149Z,1478870265.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:45.160Z,1478870265.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:45.561Z,1478870265.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:45.956Z,1478870265.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:45.974Z,1478870265.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:46.389Z,1478870266.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:46.536Z,1478870266.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:46.770Z,1478870266.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:47.181Z,1478870267.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:47.332Z,1478870267.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:47.593Z,1478870267.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:47.961Z,1478870267.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:48.129Z,1478870268.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:48.413Z,1478870268.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:48.540Z,1478870268.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:48.764Z,1478870268.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:49.193Z,1478870269.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:49.337Z,1478870269.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:49.569Z,1478870269.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:49.958Z,1478870269.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:50.133Z,1478870270.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:50.390Z,1478870270.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:50.544Z,1478870270.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:50.770Z,1478870270.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:51.166Z,1478870271.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:51.342Z,1478870271.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:51.572Z,1478870271.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:51.967Z,1478870271.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:52.137Z,1478870272.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:52.370Z,1478870272.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:52.544Z,1478870272.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:52.770Z,1478870272.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:53.185Z,1478870273.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:53.340Z,1478870273.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:53.557Z,1478870273.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:53.959Z,1478870273.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:54.136Z,1478870274.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:54.373Z,1478870274.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:54.624Z,1478870274.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:54.775Z,1478870274.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:55.188Z,1478870275.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:55.420Z,1478870275.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:55.645Z,1478870275.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:56.020Z,1478870276.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:56.216Z,1478870276.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:56.372Z,1478870276.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:56.794Z,1478870276.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:56.980Z,1478870276.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:57.161Z,1478870277.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:57.605Z,1478870277.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:57.777Z,1478870277.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:57.997Z,1478870277.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:58.357Z,1478870278.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:58.573Z,1478870278.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:58.765Z,1478870278.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:58.984Z,1478870278.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:59.158Z,1478870279.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:59.553Z,1478870279.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:17:59.780Z,1478870279.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:17:59.957Z,1478870279.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:00.363Z,1478870280.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:00.496Z,1478870280.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:00.763Z,1478870280.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:01.157Z,1478870281.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:01.292Z,1478870281.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:01.557Z,1478870281.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:01.957Z,1478870281.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:02.089Z,1478870282.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:02.353Z,1478870282.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:02.504Z,1478870282.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:02.761Z,1478870282.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:03.161Z,1478870283.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:03.300Z,1478870283.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:03.559Z,1478870283.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:03.961Z,1478870283.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:04.097Z,1478870284.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:04.363Z,1478870284.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:04.508Z,1478870284.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:04.774Z,1478870284.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:05.151Z,1478870285.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:05.304Z,1478870285.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:05.551Z,1478870285.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:05.961Z,1478870285.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:06.101Z,1478870286.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:06.364Z,1478870286.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:06.512Z,1478870286.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:06.773Z,1478870286.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:07.172Z,1478870287.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:07.308Z,1478870287.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:07.571Z,1478870287.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:08.104Z,1478870288.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:08.592Z,1478870288.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:09.388Z,1478870289.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:10.184Z,1478870290.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:10.944Z,1478870290.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:11.114Z,1478870291.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:11.218Z,1478870291.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:11.641Z,1478870291.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:11.740Z,1478870291.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:12.018Z,1478870292.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:12.449Z,1478870292.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:12.542Z,1478870292.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:12.841Z,1478870292.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:12.968Z,1478870292.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:13.220Z,1478870293.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:13.624Z,1478870293.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:13.764Z,1478870293.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:14.023Z,1478870294.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:14.423Z,1478870294.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:14.560Z,1478870294.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:14.820Z,1478870294.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:15.217Z,1478870295.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:15.356Z,1478870295.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:15.623Z,1478870295.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:16.018Z,1478870296.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:16.152Z,1478870296.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:16.417Z,1478870296.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:16.823Z,1478870296.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:16.948Z,1478870296.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:17.232Z,1478870297.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:17.649Z,1478870297.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:17.744Z,1478870297.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:18.023Z,1478870298.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:18.413Z,1478870298.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:18.540Z,1478870298.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:18.824Z,1478870298.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:19.237Z,1478870299.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:19.336Z,1478870299.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:19.619Z,1478870299.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:20.075Z,1478870300.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:20.132Z,1478870300.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:20.426Z,1478870300.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:20.833Z,1478870300.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:20.928Z,1478870300.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:21.222Z,1478870301.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:21.631Z,1478870301.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:21.724Z,1478870301.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:22.030Z,1478870302.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:22.440Z,1478870302.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:22.520Z,1478870302.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:22.825Z,1478870302.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:23.223Z,1478870303.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:23.316Z,1478870303.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:23.623Z,1478870303.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:24.018Z,1478870304.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:24.112Z,1478870304.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:24.423Z,1478870304.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:24.858Z,1478870304.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:24.908Z,1478870304.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:25.294Z,1478870305.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:25.649Z,1478870305.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:25.704Z,1478870305.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:26.020Z,1478870306.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:26.433Z,1478870306.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:26.500Z,1478870306.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:26.849Z,1478870306.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:27.211Z,1478870307.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:27.297Z,1478870307.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:27.623Z,1478870307.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:28.028Z,1478870308.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:28.092Z,1478870308.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:28.417Z,1478870308.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:28.812Z,1478870308.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:28.888Z,1478870308.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:29.223Z,1478870309.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:29.637Z,1478870309.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:29.684Z,1478870309.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:30.027Z,1478870310.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:30.418Z,1478870310.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:30.480Z,1478870310.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:30.819Z,1478870310.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:31.218Z,1478870311.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:31.276Z,1478870311.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:31.619Z,1478870311.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:32.028Z,1478870312.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:32.072Z,1478870312.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:32.418Z,1478870312.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:32.818Z,1478870312.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:32.868Z,1478870312.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:33.221Z,1478870313.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:33.643Z,1478870313.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:33.664Z,1478870313.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:34.051Z,1478870314.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:34.422Z,1478870314.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:34.460Z,1478870314.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:34.825Z,1478870314.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:35.229Z,1478870315.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:35.256Z,1478870315.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:35.617Z,1478870315.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:36.018Z,1478870316.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:36.052Z,1478870316.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:36.431Z,1478870316.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:36.841Z,1478870316.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:36.848Z,1478870316.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:37.253Z,1478870317.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:37.256Z,1478870317.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:37.664Z,1478870317.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:37.729Z,1478870317.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:38.006Z,1478870318.006 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T13:18:38.006Z,1478870318.006 [BPC1] Data Fault, FailCount= 1
2016-11-11T13:18:38.006Z,1478870318.006 [BPC1](ERROR): Data Fault
2016-11-11T13:18:38.035Z,1478870318.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:38.072Z,1478870318.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:38.090Z,1478870318.090 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T13:18:38.437Z,1478870318.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:38.481Z,1478870318.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:38.845Z,1478870318.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:38.892Z,1478870318.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:39.233Z,1478870319.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:39.276Z,1478870319.276 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:18:39.277Z,1478870319.277 [BPC1] No Fault, FailCount= 1
2016-11-11T13:18:39.300Z,1478870319.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:39.685Z,1478870319.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:39.708Z,1478870319.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:40.045Z,1478870320.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:40.116Z,1478870320.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:40.419Z,1478870320.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:40.524Z,1478870320.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:40.812Z,1478870320.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:40.932Z,1478870320.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:41.228Z,1478870321.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:41.340Z,1478870321.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:41.624Z,1478870321.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:41.748Z,1478870321.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:42.066Z,1478870322.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:42.156Z,1478870322.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:42.441Z,1478870322.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:42.564Z,1478870322.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:42.812Z,1478870322.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:42.972Z,1478870322.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:43.223Z,1478870323.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:43.627Z,1478870323.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:43.768Z,1478870323.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:44.097Z,1478870324.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:44.428Z,1478870324.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:44.463Z,1478870324.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:44.826Z,1478870324.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:45.221Z,1478870325.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:45.224Z,1478870325.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:45.623Z,1478870325.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:46.021Z,1478870326.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:46.061Z,1478870326.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:46.440Z,1478870326.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:46.456Z,1478870326.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:46.815Z,1478870326.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:47.220Z,1478870327.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:47.252Z,1478870327.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:47.621Z,1478870327.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:48.048Z,1478870328.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:48.077Z,1478870328.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:48.431Z,1478870328.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:48.468Z,1478870328.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:48.830Z,1478870328.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:49.233Z,1478870329.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:49.264Z,1478870329.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:49.636Z,1478870329.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:50.060Z,1478870330.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:50.070Z,1478870330.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:50.437Z,1478870330.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:50.824Z,1478870330.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:50.856Z,1478870330.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:51.234Z,1478870331.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:51.264Z,1478870331.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:51.624Z,1478870331.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:52.060Z,1478870332.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:52.069Z,1478870332.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:52.493Z,1478870332.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:52.828Z,1478870332.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:52.856Z,1478870332.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:53.250Z,1478870333.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:53.264Z,1478870333.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:53.641Z,1478870333.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:54.060Z,1478870334.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:54.066Z,1478870334.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:54.470Z,1478870334.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:54.830Z,1478870334.830 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:54.831Z,1478870334.830 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 150
2016-11-11T13:18:54.831Z,1478870334.831 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:18:54.837Z,1478870334.837 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:54.837Z,1478870334.837 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 150
2016-11-11T13:18:54.837Z,1478870334.837 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:18:54.839Z,1478870334.839 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:54.839Z,1478870334.839 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 150
2016-11-11T13:18:54.839Z,1478870334.839 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:18:54.856Z,1478870334.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:54.890Z,1478870334.890 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:18:54.891Z,1478870334.891 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:18:54.891Z,1478870334.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:18:55.264Z,1478870335.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:55.268Z,1478870335.267 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:18:55.268Z,1478870335.268 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 150
2016-11-11T13:18:55.268Z,1478870335.268 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:18:55.268Z,1478870335.268 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 150
2016-11-11T13:18:55.269Z,1478870335.269 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:18:55.269Z,1478870335.269 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 150
2016-11-11T13:18:55.668Z,1478870335.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:18:55.669Z,1478870335.668 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:18:55.669Z,1478870335.669 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:18:55.678Z,1478870335.678 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:18:55.678Z,1478870335.678 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:18:55.678Z,1478870335.678 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:18:55.683Z,1478870335.683 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:18:55.683Z,1478870335.684 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:18:55.684Z,1478870335.684 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:18:56.060Z,1478870336.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:56.076Z,1478870336.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:56.422Z,1478870336.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:56.472Z,1478870336.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:56.826Z,1478870336.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:57.223Z,1478870337.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:57.268Z,1478870337.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:57.634Z,1478870337.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:58.059Z,1478870338.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:58.064Z,1478870338.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:58.431Z,1478870338.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:58.472Z,1478870338.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:58.830Z,1478870338.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:59.224Z,1478870339.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:18:59.268Z,1478870339.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:18:59.637Z,1478870339.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:00.064Z,1478870340.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:00.072Z,1478870340.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:00.422Z,1478870340.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:00.472Z,1478870340.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:00.829Z,1478870340.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:01.229Z,1478870341.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:01.268Z,1478870341.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:01.623Z,1478870341.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:02.064Z,1478870342.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:02.082Z,1478870342.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:02.430Z,1478870342.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:02.472Z,1478870342.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:02.827Z,1478870342.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:03.233Z,1478870343.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:03.268Z,1478870343.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:03.633Z,1478870343.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:04.018Z,1478870344.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:04.065Z,1478870344.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:04.426Z,1478870344.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:04.508Z,1478870344.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:04.825Z,1478870344.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:05.227Z,1478870345.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:05.304Z,1478870345.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:05.629Z,1478870345.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:06.023Z,1478870346.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:06.103Z,1478870346.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:06.541Z,1478870346.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:06.871Z,1478870346.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:06.880Z,1478870346.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:07.259Z,1478870347.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:07.645Z,1478870347.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:07.676Z,1478870347.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:08.473Z,1478870348.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:08.884Z,1478870348.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:09.680Z,1478870349.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:10.380Z,1478870350.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:11.176Z,1478870351.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:11.264Z,1478870351.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:11.413Z,1478870351.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:11.769Z,1478870351.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:11.973Z,1478870351.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:12.201Z,1478870352.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:12.384Z,1478870352.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:12.559Z,1478870352.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:12.970Z,1478870352.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:13.180Z,1478870353.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:13.363Z,1478870353.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:13.763Z,1478870353.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:13.984Z,1478870353.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:14.162Z,1478870354.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:14.400Z,1478870354.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:14.562Z,1478870354.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:14.964Z,1478870354.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:15.196Z,1478870355.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:15.373Z,1478870355.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:15.769Z,1478870355.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:15.995Z,1478870355.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:16.171Z,1478870356.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:16.404Z,1478870356.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:16.573Z,1478870356.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:16.965Z,1478870356.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:17.201Z,1478870357.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:17.366Z,1478870357.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:17.772Z,1478870357.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:17.996Z,1478870357.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:18.169Z,1478870358.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:18.472Z,1478870358.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:18.564Z,1478870358.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:18.969Z,1478870358.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:19.268Z,1478870359.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:19.375Z,1478870359.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:19.769Z,1478870359.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:20.064Z,1478870360.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:20.176Z,1478870360.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:20.572Z,1478870360.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:20.836Z,1478870360.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:20.981Z,1478870360.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:21.356Z,1478870361.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:21.632Z,1478870361.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:21.765Z,1478870361.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:22.163Z,1478870362.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:22.429Z,1478870362.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:22.567Z,1478870362.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:22.840Z,1478870362.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:22.964Z,1478870362.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:23.376Z,1478870363.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:23.636Z,1478870363.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:23.769Z,1478870363.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:24.237Z,1478870364.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:24.360Z,1478870364.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:24.573Z,1478870364.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:24.956Z,1478870364.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:25.156Z,1478870365.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:25.394Z,1478870365.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:25.761Z,1478870365.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:25.956Z,1478870365.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:26.205Z,1478870366.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:26.384Z,1478870366.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:26.590Z,1478870366.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:26.961Z,1478870366.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:27.180Z,1478870367.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:27.365Z,1478870367.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:27.769Z,1478870367.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:27.977Z,1478870367.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:28.169Z,1478870368.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:28.396Z,1478870368.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:28.567Z,1478870368.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:28.987Z,1478870368.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:29.192Z,1478870369.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:29.364Z,1478870369.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:29.766Z,1478870369.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:29.989Z,1478870369.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:30.164Z,1478870370.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:30.400Z,1478870370.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:30.565Z,1478870370.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:30.973Z,1478870370.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:31.196Z,1478870371.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:31.372Z,1478870371.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:31.766Z,1478870371.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:31.994Z,1478870371.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:32.164Z,1478870372.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:32.468Z,1478870372.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:32.573Z,1478870372.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:32.965Z,1478870372.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:33.264Z,1478870373.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:33.380Z,1478870373.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:33.773Z,1478870373.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:34.060Z,1478870374.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:34.171Z,1478870374.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:34.572Z,1478870374.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:34.812Z,1478870374.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:34.977Z,1478870374.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:35.372Z,1478870375.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:35.608Z,1478870375.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:35.773Z,1478870375.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:36.169Z,1478870376.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:36.405Z,1478870376.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:36.577Z,1478870376.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:36.816Z,1478870376.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:36.982Z,1478870376.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:37.382Z,1478870377.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:37.613Z,1478870377.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:37.769Z,1478870377.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:38.168Z,1478870378.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:38.336Z,1478870378.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:38.618Z,1478870378.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:38.968Z,1478870378.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:39.132Z,1478870379.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:39.389Z,1478870379.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:39.765Z,1478870379.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:39.929Z,1478870379.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:40.201Z,1478870380.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:40.344Z,1478870380.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:40.589Z,1478870380.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:40.971Z,1478870380.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:41.140Z,1478870381.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:41.363Z,1478870381.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:41.773Z,1478870381.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:41.937Z,1478870381.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:42.169Z,1478870382.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:42.352Z,1478870382.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:42.567Z,1478870382.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:42.972Z,1478870382.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:43.148Z,1478870383.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:43.369Z,1478870383.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:43.764Z,1478870383.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:43.945Z,1478870383.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:44.169Z,1478870384.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:44.360Z,1478870384.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:44.573Z,1478870384.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:44.978Z,1478870384.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:45.156Z,1478870385.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:45.373Z,1478870385.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:45.775Z,1478870385.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:45.952Z,1478870385.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:46.177Z,1478870386.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:46.444Z,1478870386.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:46.576Z,1478870386.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:46.975Z,1478870386.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:47.240Z,1478870387.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:47.364Z,1478870387.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:47.780Z,1478870387.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:48.036Z,1478870388.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:48.157Z,1478870388.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:48.561Z,1478870388.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:48.788Z,1478870388.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:48.961Z,1478870388.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:49.362Z,1478870389.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:49.584Z,1478870389.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:49.765Z,1478870389.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:50.169Z,1478870390.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:50.381Z,1478870390.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:50.569Z,1478870390.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:50.792Z,1478870390.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:50.968Z,1478870390.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:51.366Z,1478870391.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:51.588Z,1478870391.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:51.773Z,1478870391.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:52.172Z,1478870392.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:52.328Z,1478870392.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:52.609Z,1478870392.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:52.969Z,1478870392.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:53.124Z,1478870393.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:53.398Z,1478870393.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:53.769Z,1478870393.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:53.921Z,1478870393.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:54.206Z,1478870394.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:54.332Z,1478870394.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:54.590Z,1478870394.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:54.973Z,1478870394.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:55.128Z,1478870395.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:55.377Z,1478870395.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:55.756Z,1478870395.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:55.925Z,1478870395.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:56.183Z,1478870396.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:56.336Z,1478870396.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:56.561Z,1478870396.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:56.958Z,1478870396.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:57.132Z,1478870397.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:57.361Z,1478870397.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:57.765Z,1478870397.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:57.931Z,1478870397.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:58.163Z,1478870398.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:58.340Z,1478870398.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:58.569Z,1478870398.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:58.969Z,1478870398.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:59.136Z,1478870399.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:19:59.364Z,1478870399.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:59.772Z,1478870399.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:19:59.932Z,1478870399.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:00.180Z,1478870400.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:00.412Z,1478870400.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:00.574Z,1478870400.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:00.973Z,1478870400.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:01.208Z,1478870401.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:01.364Z,1478870401.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:01.766Z,1478870401.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:02.004Z,1478870402.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:02.166Z,1478870402.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:02.569Z,1478870402.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:02.768Z,1478870402.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:02.974Z,1478870402.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:03.366Z,1478870403.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:03.564Z,1478870403.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:03.772Z,1478870403.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:04.173Z,1478870404.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:04.361Z,1478870404.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:04.571Z,1478870404.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:04.772Z,1478870404.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:04.974Z,1478870404.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:05.377Z,1478870405.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:05.568Z,1478870405.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:05.770Z,1478870405.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:06.167Z,1478870406.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:06.300Z,1478870406.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:06.625Z,1478870406.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:06.969Z,1478870406.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:07.096Z,1478870407.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:07.410Z,1478870407.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:07.764Z,1478870407.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:07.904Z,1478870407.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:08.324Z,1478870408.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:09.120Z,1478870409.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:09.916Z,1478870409.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:10.324Z,1478870410.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:11.120Z,1478870411.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:11.164Z,1478870411.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:11.325Z,1478870411.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:11.673Z,1478870411.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:11.916Z,1478870411.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:12.049Z,1478870412.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:12.324Z,1478870412.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:12.444Z,1478870412.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:12.847Z,1478870412.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:13.120Z,1478870413.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:13.244Z,1478870413.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:13.641Z,1478870413.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:13.916Z,1478870413.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:14.067Z,1478870414.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:14.456Z,1478870414.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:14.460Z,1478870414.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:14.878Z,1478870414.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:15.236Z,1478870415.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:15.256Z,1478870415.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:15.646Z,1478870415.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:16.052Z,1478870416.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:16.055Z,1478870416.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:16.486Z,1478870416.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:16.748Z,1478870416.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:16.851Z,1478870416.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:17.245Z,1478870417.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:17.544Z,1478870417.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:17.652Z,1478870417.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:18.047Z,1478870418.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:18.341Z,1478870418.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:18.445Z,1478870418.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:18.752Z,1478870418.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:18.852Z,1478870418.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:19.252Z,1478870419.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:19.548Z,1478870419.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:19.650Z,1478870419.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:20.059Z,1478870420.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:20.272Z,1478870420.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:20.430Z,1478870420.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:20.830Z,1478870420.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:21.068Z,1478870421.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:21.245Z,1478870421.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:21.651Z,1478870421.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:21.865Z,1478870421.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:22.046Z,1478870422.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:22.276Z,1478870422.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:22.447Z,1478870422.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:22.845Z,1478870422.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:23.072Z,1478870423.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:23.240Z,1478870423.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:23.658Z,1478870423.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:23.874Z,1478870423.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:24.093Z,1478870424.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:24.300Z,1478870424.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:24.449Z,1478870424.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:24.858Z,1478870424.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:25.096Z,1478870425.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:25.248Z,1478870425.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:25.661Z,1478870425.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:25.892Z,1478870425.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:26.093Z,1478870426.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:26.300Z,1478870426.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:26.447Z,1478870426.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:26.849Z,1478870426.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:27.096Z,1478870427.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:27.250Z,1478870427.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:27.685Z,1478870427.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:27.892Z,1478870427.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:28.045Z,1478870428.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:28.436Z,1478870428.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:28.688Z,1478870428.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:28.831Z,1478870428.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:29.096Z,1478870429.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:29.240Z,1478870429.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:29.645Z,1478870429.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:29.892Z,1478870429.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:30.051Z,1478870430.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:30.457Z,1478870430.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:30.688Z,1478870430.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:30.858Z,1478870430.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:31.096Z,1478870431.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:31.281Z,1478870431.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:31.634Z,1478870431.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:31.892Z,1478870431.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:32.045Z,1478870432.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:32.443Z,1478870432.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:32.688Z,1478870432.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:32.884Z,1478870432.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:33.096Z,1478870433.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:33.243Z,1478870433.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:33.637Z,1478870433.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:33.892Z,1478870433.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:34.045Z,1478870434.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:34.300Z,1478870434.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:34.442Z,1478870434.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:34.851Z,1478870434.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:35.096Z,1478870435.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:35.244Z,1478870435.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:35.641Z,1478870435.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:35.892Z,1478870435.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:36.047Z,1478870436.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:36.300Z,1478870436.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:36.443Z,1478870436.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:36.846Z,1478870436.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:37.096Z,1478870437.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:37.245Z,1478870437.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:37.646Z,1478870437.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:37.892Z,1478870437.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:38.089Z,1478870438.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:38.300Z,1478870438.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:38.430Z,1478870438.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:38.835Z,1478870438.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:39.096Z,1478870439.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:39.241Z,1478870439.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:39.637Z,1478870439.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:39.893Z,1478870439.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:40.042Z,1478870440.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:40.304Z,1478870440.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:40.437Z,1478870440.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:40.836Z,1478870440.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:41.100Z,1478870441.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:41.235Z,1478870441.235 [BPC1](ERROR): Failed to receive battery data
2016-11-11T13:20:41.235Z,1478870441.235 [BPC1] Communications Fault, FailCount= 1
2016-11-11T13:20:41.235Z,1478870441.235 [BPC1](ERROR): Communications Fault
2016-11-11T13:20:41.243Z,1478870441.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:41.284Z,1478870441.284 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T13:20:41.641Z,1478870441.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:41.896Z,1478870441.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:42.041Z,1478870442.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:42.344Z,1478870442.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:42.445Z,1478870442.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:42.473Z,1478870442.473 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:20:42.473Z,1478870442.473 [BPC1] No Fault, FailCount= 1
2016-11-11T13:20:42.890Z,1478870442.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:43.140Z,1478870443.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:43.273Z,1478870443.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:43.649Z,1478870443.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:43.937Z,1478870443.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:44.083Z,1478870444.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:44.456Z,1478870444.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:44.704Z,1478870444.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:44.850Z,1478870444.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:45.248Z,1478870445.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:45.500Z,1478870445.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:45.649Z,1478870445.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:46.050Z,1478870446.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:46.297Z,1478870446.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:46.446Z,1478870446.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:46.708Z,1478870446.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:46.854Z,1478870446.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:47.265Z,1478870447.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:47.504Z,1478870447.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:47.681Z,1478870447.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:48.038Z,1478870448.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:48.232Z,1478870448.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:48.481Z,1478870448.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:48.856Z,1478870448.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:49.028Z,1478870449.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:49.289Z,1478870449.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:49.653Z,1478870449.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:49.825Z,1478870449.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:50.089Z,1478870450.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:50.244Z,1478870450.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:50.449Z,1478870450.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:50.854Z,1478870450.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:51.040Z,1478870451.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:51.269Z,1478870451.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:51.650Z,1478870451.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:51.837Z,1478870451.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:52.049Z,1478870452.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:52.248Z,1478870452.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:52.449Z,1478870452.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:52.843Z,1478870452.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:53.044Z,1478870453.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:53.257Z,1478870453.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:53.637Z,1478870453.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:53.843Z,1478870453.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:54.062Z,1478870454.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:54.252Z,1478870454.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:54.435Z,1478870454.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:54.837Z,1478870454.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:55.049Z,1478870455.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:55.237Z,1478870455.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:55.641Z,1478870455.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:55.844Z,1478870455.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:56.042Z,1478870456.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:56.328Z,1478870456.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:56.445Z,1478870456.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:56.840Z,1478870456.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:57.124Z,1478870457.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:57.245Z,1478870457.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:57.645Z,1478870457.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:57.922Z,1478870457.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:58.047Z,1478870458.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:58.446Z,1478870458.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:58.680Z,1478870458.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:58.848Z,1478870458.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:59.244Z,1478870459.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:20:59.478Z,1478870459.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:20:59.655Z,1478870459.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:00.052Z,1478870460.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:00.273Z,1478870460.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:00.462Z,1478870460.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:00.692Z,1478870460.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:00.857Z,1478870460.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:01.254Z,1478870461.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:01.488Z,1478870461.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:01.652Z,1478870461.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:02.078Z,1478870462.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:02.208Z,1478870462.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:02.436Z,1478870462.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:02.834Z,1478870462.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:03.004Z,1478870463.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:03.237Z,1478870463.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:03.685Z,1478870463.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:03.801Z,1478870463.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:04.052Z,1478870464.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:04.214Z,1478870464.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:04.509Z,1478870464.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:04.848Z,1478870464.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:05.008Z,1478870465.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:05.286Z,1478870465.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:05.689Z,1478870465.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:05.805Z,1478870465.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:06.090Z,1478870466.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:06.216Z,1478870466.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:06.452Z,1478870466.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:06.851Z,1478870466.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:07.012Z,1478870467.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:07.251Z,1478870467.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:07.642Z,1478870467.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:07.809Z,1478870467.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:08.056Z,1478870468.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:08.220Z,1478870468.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:09.016Z,1478870469.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:09.813Z,1478870469.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:10.312Z,1478870470.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:11.108Z,1478870471.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:11.405Z,1478870471.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:11.516Z,1478870471.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:11.881Z,1478870471.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:11.904Z,1478870471.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:12.333Z,1478870472.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:12.678Z,1478870472.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:12.700Z,1478870472.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:13.089Z,1478870473.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:13.108Z,1478870473.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:13.481Z,1478870473.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:13.880Z,1478870473.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:13.904Z,1478870473.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:14.353Z,1478870474.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:14.664Z,1478870474.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:14.677Z,1478870474.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:15.075Z,1478870475.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:15.460Z,1478870475.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:15.477Z,1478870475.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:15.874Z,1478870475.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:16.192Z,1478870476.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:16.313Z,1478870476.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:16.678Z,1478870476.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:16.988Z,1478870476.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:17.081Z,1478870477.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:17.476Z,1478870477.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:17.785Z,1478870477.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:17.925Z,1478870477.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:18.196Z,1478870478.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:18.287Z,1478870478.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:18.684Z,1478870478.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:18.992Z,1478870478.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:19.098Z,1478870479.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:19.487Z,1478870479.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:19.797Z,1478870479.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:19.905Z,1478870479.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:20.216Z,1478870480.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:20.301Z,1478870480.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:20.687Z,1478870480.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:21.012Z,1478870481.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:21.088Z,1478870481.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:21.487Z,1478870481.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:21.808Z,1478870481.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:21.883Z,1478870481.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:22.216Z,1478870482.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:22.308Z,1478870482.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:22.703Z,1478870482.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:23.012Z,1478870483.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:23.101Z,1478870483.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:23.490Z,1478870483.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:23.808Z,1478870483.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:23.990Z,1478870483.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:24.297Z,1478870484.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:24.332Z,1478870484.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:24.709Z,1478870484.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:25.110Z,1478870485.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:25.128Z,1478870485.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:25.496Z,1478870485.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:25.898Z,1478870485.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:25.924Z,1478870485.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:26.313Z,1478870486.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:26.696Z,1478870486.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:26.710Z,1478870486.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:27.074Z,1478870487.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:27.480Z,1478870487.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:27.492Z,1478870487.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:27.885Z,1478870487.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:28.288Z,1478870488.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:28.341Z,1478870488.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:28.696Z,1478870488.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:28.706Z,1478870488.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:29.089Z,1478870489.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:29.487Z,1478870489.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:29.492Z,1478870489.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:29.908Z,1478870489.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:30.176Z,1478870490.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:30.299Z,1478870490.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:30.684Z,1478870490.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:30.972Z,1478870490.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:31.152Z,1478870491.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:31.503Z,1478870491.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:31.771Z,1478870491.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:31.887Z,1478870491.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:32.184Z,1478870492.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:32.329Z,1478870492.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:32.755Z,1478870492.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:32.981Z,1478870492.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:33.077Z,1478870493.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:33.521Z,1478870493.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:33.777Z,1478870493.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:33.881Z,1478870493.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:34.188Z,1478870494.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:34.309Z,1478870494.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:34.726Z,1478870494.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:34.984Z,1478870494.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:35.090Z,1478870495.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:35.519Z,1478870495.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:35.781Z,1478870495.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:35.915Z,1478870495.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:36.192Z,1478870496.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:36.309Z,1478870496.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:36.669Z,1478870496.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:36.988Z,1478870496.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:37.082Z,1478870497.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:37.489Z,1478870497.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:37.784Z,1478870497.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:37.903Z,1478870497.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:38.283Z,1478870498.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:38.316Z,1478870498.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:38.689Z,1478870498.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:39.087Z,1478870499.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:39.112Z,1478870499.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:39.524Z,1478870499.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:39.885Z,1478870499.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:39.908Z,1478870499.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:40.314Z,1478870500.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:40.639Z,1478870500.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:40.726Z,1478870500.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:41.097Z,1478870501.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:41.436Z,1478870501.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:41.497Z,1478870501.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:41.901Z,1478870501.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:42.232Z,1478870502.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:42.306Z,1478870502.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:42.646Z,1478870502.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:42.724Z,1478870502.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:43.107Z,1478870503.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:43.444Z,1478870503.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:43.493Z,1478870503.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:43.894Z,1478870503.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:44.156Z,1478870504.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:44.279Z,1478870504.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:44.701Z,1478870504.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:44.952Z,1478870504.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:45.138Z,1478870505.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:45.490Z,1478870505.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:45.749Z,1478870505.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:45.879Z,1478870505.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:46.160Z,1478870506.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:46.294Z,1478870506.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:46.691Z,1478870506.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:46.956Z,1478870506.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:47.137Z,1478870507.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:47.490Z,1478870507.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:47.753Z,1478870507.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:47.904Z,1478870507.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:48.164Z,1478870508.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:48.305Z,1478870508.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:48.718Z,1478870508.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:48.960Z,1478870508.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:49.094Z,1478870509.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:49.502Z,1478870509.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:49.756Z,1478870509.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:49.896Z,1478870509.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:50.287Z,1478870510.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:50.552Z,1478870510.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:50.677Z,1478870510.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:51.079Z,1478870511.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:51.348Z,1478870511.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:51.477Z,1478870511.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:51.882Z,1478870511.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:52.144Z,1478870512.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:52.278Z,1478870512.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:52.684Z,1478870512.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:52.940Z,1478870512.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:53.083Z,1478870513.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:53.476Z,1478870513.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:53.736Z,1478870513.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:53.877Z,1478870513.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:54.287Z,1478870514.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:54.532Z,1478870514.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:54.684Z,1478870514.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:55.087Z,1478870515.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:55.328Z,1478870515.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:55.480Z,1478870515.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:55.888Z,1478870515.888 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:55.888Z,1478870515.888 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 151
2016-11-11T13:21:55.888Z,1478870515.888 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:21:55.894Z,1478870515.894 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:55.895Z,1478870515.895 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 151
2016-11-11T13:21:55.895Z,1478870515.895 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:21:55.897Z,1478870515.897 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:55.897Z,1478870515.897 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 151
2016-11-11T13:21:55.897Z,1478870515.897 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:21:55.911Z,1478870515.911 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:21:55.912Z,1478870515.912 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:21:55.912Z,1478870515.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:21:56.124Z,1478870516.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:56.326Z,1478870516.326 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:21:56.326Z,1478870516.326 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 151
2016-11-11T13:21:56.331Z,1478870516.331 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:21:56.331Z,1478870516.331 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 151
2016-11-11T13:21:56.332Z,1478870516.332 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:21:56.332Z,1478870516.332 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 151
2016-11-11T13:21:56.672Z,1478870516.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:21:56.673Z,1478870516.672 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:21:56.673Z,1478870516.673 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:21:56.686Z,1478870516.686 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:21:56.686Z,1478870516.686 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:21:56.687Z,1478870516.687 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:21:56.687Z,1478870516.687 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:21:56.687Z,1478870516.687 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:21:56.688Z,1478870516.688 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:21:56.920Z,1478870516.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:57.073Z,1478870517.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:57.477Z,1478870517.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:57.716Z,1478870517.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:57.876Z,1478870517.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:58.413Z,1478870518.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:58.512Z,1478870518.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:58.675Z,1478870518.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:59.083Z,1478870519.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:59.308Z,1478870519.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:21:59.484Z,1478870519.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:21:59.913Z,1478870519.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:00.120Z,1478870520.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:00.285Z,1478870520.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:00.678Z,1478870520.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:00.916Z,1478870520.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:01.086Z,1478870521.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:01.512Z,1478870521.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:01.712Z,1478870521.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:01.885Z,1478870521.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:02.309Z,1478870522.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:02.508Z,1478870522.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:02.693Z,1478870522.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:03.109Z,1478870523.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:03.304Z,1478870523.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:03.501Z,1478870523.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:03.871Z,1478870523.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:04.100Z,1478870524.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:04.272Z,1478870524.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:04.675Z,1478870524.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:04.896Z,1478870524.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:05.075Z,1478870525.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:05.474Z,1478870525.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:05.692Z,1478870525.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:05.880Z,1478870525.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:06.281Z,1478870526.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:06.488Z,1478870526.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:06.681Z,1478870526.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:07.136Z,1478870527.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:07.284Z,1478870527.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:07.490Z,1478870527.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:07.535Z,1478870527.536 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T13:22:07.536Z,1478870527.536 [Default:CheckIn:C.Wait] Stopped
2016-11-11T13:22:07.536Z,1478870527.536 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T13:22:07.536Z,1478870527.536 [Default:CheckIn:D] Running Loop=1
2016-11-11T13:22:07.692Z,1478870527.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:07.877Z,1478870527.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:07.886Z,1478870527.885 [Default:CheckIn:D] Stopped
2016-11-11T13:22:07.886Z,1478870527.886 [Default:CheckIn:E] Running Loop=1
2016-11-11T13:22:08.100Z,1478870528.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:08.281Z,1478870528.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:08.290Z,1478870528.290 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 512.109603 min 
2016-11-11T13:22:08.290Z,1478870528.290 [Default:CheckIn:E] Stopped
2016-11-11T13:22:08.291Z,1478870528.291 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T13:22:08.291Z,1478870528.291 [Default:CheckIn] Stopped
2016-11-11T13:22:08.291Z,1478870528.291 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T13:22:08.291Z,1478870528.291 [Default:CheckIn](INFO): Running loop #50
2016-11-11T13:22:08.291Z,1478870528.291 [Default:CheckIn] Running Loop=50
2016-11-11T13:22:08.291Z,1478870528.291 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T13:22:08.291Z,1478870528.291 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T13:22:08.508Z,1478870528.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:08.916Z,1478870528.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:09.324Z,1478870529.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:09.732Z,1478870529.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:10.141Z,1478870530.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:10.552Z,1478870530.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:10.961Z,1478870530.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:11.372Z,1478870531.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:11.780Z,1478870531.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:12.130Z,1478870532.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:12.189Z,1478870532.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:12.216Z,1478870532.216 [NAL9602](INFO): Powering up
2016-11-11T13:22:12.281Z,1478870532.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:12.603Z,1478870532.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:12.984Z,1478870532.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:13.004Z,1478870533.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:13.410Z,1478870533.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:13.781Z,1478870533.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:13.823Z,1478870533.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:14.188Z,1478870534.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:14.233Z,1478870534.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:14.615Z,1478870534.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:14.985Z,1478870534.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:15.012Z,1478870535.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:15.437Z,1478870535.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:15.780Z,1478870535.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:15.836Z,1478870535.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:16.188Z,1478870536.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:16.221Z,1478870536.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:16.601Z,1478870536.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:16.985Z,1478870536.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:17.037Z,1478870537.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:17.401Z,1478870537.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:17.780Z,1478870537.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:17.834Z,1478870537.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:18.188Z,1478870538.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:18.231Z,1478870538.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:18.601Z,1478870538.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:18.984Z,1478870538.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:19.025Z,1478870539.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:19.413Z,1478870539.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:19.781Z,1478870539.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:19.866Z,1478870539.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:20.205Z,1478870540.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:20.244Z,1478870540.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:20.606Z,1478870540.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:21.013Z,1478870541.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:21.040Z,1478870541.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:21.409Z,1478870541.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:21.804Z,1478870541.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:21.836Z,1478870541.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:22.236Z,1478870542.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:22.552Z,1478870542.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:22.618Z,1478870542.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:23.027Z,1478870543.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:23.348Z,1478870543.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:23.365Z,1478870543.365 [NAL9602](INFO): NAL9602 initialized
2016-11-11T13:22:23.418Z,1478870543.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:23.812Z,1478870543.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:24.145Z,1478870544.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:24.166Z,1478870544.166 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T13:22:24.166Z,1478870544.166 [NAL9602] Data Fault, FailCount= 4
2016-11-11T13:22:24.166Z,1478870544.166 [NAL9602](ERROR): Data Fault
2016-11-11T13:22:24.253Z,1478870544.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:24.293Z,1478870544.293 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T13:22:24.556Z,1478870544.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:24.573Z,1478870544.573 [NAL9602](INFO): Powering down
2016-11-11T13:22:24.615Z,1478870544.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:25.009Z,1478870545.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:25.352Z,1478870545.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:25.406Z,1478870545.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:25.442Z,1478870545.442 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T13:22:25.442Z,1478870545.442 [NAL9602] No Fault, FailCount= 4
2016-11-11T13:22:25.825Z,1478870545.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:26.078Z,1478870546.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:26.203Z,1478870546.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:26.611Z,1478870546.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:26.872Z,1478870546.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:27.004Z,1478870547.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:27.413Z,1478870547.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:27.669Z,1478870547.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:27.804Z,1478870547.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:28.080Z,1478870548.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:28.206Z,1478870548.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:28.618Z,1478870548.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:28.876Z,1478870548.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:29.066Z,1478870549.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:29.428Z,1478870549.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:29.673Z,1478870549.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:29.765Z,1478870549.765 [NAL9602](INFO): Powering up NAL9602
2016-11-11T13:22:29.828Z,1478870549.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:30.084Z,1478870550.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:30.247Z,1478870550.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:30.606Z,1478870550.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:30.880Z,1478870550.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:31.037Z,1478870551.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:31.426Z,1478870551.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:31.677Z,1478870551.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:31.843Z,1478870551.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:32.088Z,1478870552.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:32.228Z,1478870552.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:32.642Z,1478870552.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:32.884Z,1478870552.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:33.032Z,1478870553.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:33.405Z,1478870553.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:33.680Z,1478870553.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:33.853Z,1478870553.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:34.184Z,1478870554.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:34.201Z,1478870554.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:34.603Z,1478870554.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:34.980Z,1478870554.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:35.009Z,1478870555.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:35.403Z,1478870555.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:35.777Z,1478870555.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:35.805Z,1478870555.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:36.213Z,1478870556.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:36.528Z,1478870556.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:36.607Z,1478870556.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:37.009Z,1478870557.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:37.324Z,1478870557.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:37.404Z,1478870557.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:37.813Z,1478870557.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:38.121Z,1478870558.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:38.221Z,1478870558.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:38.532Z,1478870558.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:38.613Z,1478870558.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:39.017Z,1478870559.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:39.328Z,1478870559.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:39.413Z,1478870559.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:39.809Z,1478870559.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:40.060Z,1478870560.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:40.206Z,1478870560.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:40.621Z,1478870560.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:40.856Z,1478870560.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:40.965Z,1478870560.965 [NAL9602](INFO): NAL9602 initialized
2016-11-11T13:22:41.013Z,1478870561.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:41.416Z,1478870561.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:41.653Z,1478870561.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:41.828Z,1478870561.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:42.064Z,1478870562.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:42.219Z,1478870562.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:42.625Z,1478870562.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:42.860Z,1478870562.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:43.004Z,1478870563.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:43.420Z,1478870563.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:43.657Z,1478870563.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:43.845Z,1478870563.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:44.068Z,1478870564.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:44.225Z,1478870564.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:44.641Z,1478870564.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:44.864Z,1478870564.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:45.007Z,1478870565.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:45.445Z,1478870565.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:45.661Z,1478870565.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:45.817Z,1478870565.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:46.072Z,1478870566.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:46.252Z,1478870566.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:46.630Z,1478870566.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:46.869Z,1478870566.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:47.006Z,1478870567.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:47.406Z,1478870567.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:47.664Z,1478870567.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:47.829Z,1478870567.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:48.168Z,1478870568.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:48.225Z,1478870568.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:48.618Z,1478870568.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:48.964Z,1478870568.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:49.013Z,1478870569.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:49.421Z,1478870569.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:49.760Z,1478870569.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:49.821Z,1478870569.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:50.196Z,1478870570.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:50.508Z,1478870570.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:50.611Z,1478870570.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:51.037Z,1478870571.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:51.304Z,1478870571.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:51.405Z,1478870571.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:51.802Z,1478870571.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:52.108Z,1478870572.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:52.209Z,1478870572.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:52.524Z,1478870572.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:52.604Z,1478870572.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:53.012Z,1478870573.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:53.320Z,1478870573.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:53.415Z,1478870573.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:53.813Z,1478870573.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:54.028Z,1478870574.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:54.213Z,1478870574.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:54.613Z,1478870574.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:54.824Z,1478870574.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:55.010Z,1478870575.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:55.412Z,1478870575.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:55.621Z,1478870575.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:55.816Z,1478870575.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:56.032Z,1478870576.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:56.213Z,1478870576.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:56.613Z,1478870576.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:56.828Z,1478870576.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:57.033Z,1478870577.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:57.398Z,1478870577.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:57.624Z,1478870577.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:57.826Z,1478870577.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:58.044Z,1478870578.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:58.226Z,1478870578.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:58.641Z,1478870578.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:58.840Z,1478870578.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:59.003Z,1478870579.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:59.442Z,1478870579.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:22:59.636Z,1478870579.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:22:59.809Z,1478870579.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:00.048Z,1478870580.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:00.236Z,1478870580.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:00.645Z,1478870580.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:00.844Z,1478870580.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:01.004Z,1478870581.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:01.408Z,1478870581.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:01.640Z,1478870581.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:01.808Z,1478870581.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:02.120Z,1478870582.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:02.209Z,1478870582.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:02.612Z,1478870582.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:02.916Z,1478870582.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:03.012Z,1478870583.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:03.417Z,1478870583.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:03.712Z,1478870583.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:03.812Z,1478870583.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:04.213Z,1478870584.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:04.476Z,1478870584.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:04.620Z,1478870584.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:05.016Z,1478870585.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:05.272Z,1478870585.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:05.417Z,1478870585.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:05.798Z,1478870585.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:06.069Z,1478870586.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:06.233Z,1478870586.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:06.480Z,1478870586.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:06.608Z,1478870586.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:07.004Z,1478870587.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:07.276Z,1478870587.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:07.414Z,1478870587.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:07.808Z,1478870587.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:08.004Z,1478870588.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:08.206Z,1478870588.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:08.607Z,1478870588.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:08.800Z,1478870588.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:09.597Z,1478870589.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:10.008Z,1478870590.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:10.804Z,1478870590.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:11.601Z,1478870591.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:12.012Z,1478870592.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:12.251Z,1478870592.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:12.409Z,1478870592.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:12.749Z,1478870592.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:12.808Z,1478870592.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:13.117Z,1478870593.117 [PNI_TCM](ERROR): CRC does not match. Expected:0x60682 got:0x11677
2016-11-11T13:23:13.157Z,1478870593.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:13.488Z,1478870593.488 [NAL9602](INFO): SBD MO Status=2, MOMSN=347, MT Status=2, MTMSN=0
2016-11-11T13:23:13.488Z,1478870593.488 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T13:23:13.605Z,1478870593.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:13.630Z,1478870593.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:13.933Z,1478870593.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:14.026Z,1478870594.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:14.369Z,1478870594.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:14.718Z,1478870594.718 [PNI_TCM](ERROR): CRC does not match. Expected:0x27841 got:0x16868
2016-11-11T13:23:14.769Z,1478870594.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:14.820Z,1478870594.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:15.129Z,1478870595.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:15.532Z,1478870595.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:15.628Z,1478870595.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:15.928Z,1478870595.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:16.341Z,1478870596.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:16.424Z,1478870596.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:16.733Z,1478870596.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:17.135Z,1478870597.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:17.220Z,1478870597.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:17.541Z,1478870597.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:17.945Z,1478870597.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:18.024Z,1478870598.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:18.338Z,1478870598.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:18.452Z,1478870598.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:18.736Z,1478870598.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:19.138Z,1478870599.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:19.248Z,1478870599.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:19.531Z,1478870599.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:19.942Z,1478870599.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:20.045Z,1478870600.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:20.337Z,1478870600.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:20.460Z,1478870600.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:20.733Z,1478870600.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:21.132Z,1478870601.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:21.256Z,1478870601.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:21.524Z,1478870601.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:21.938Z,1478870601.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:21.996Z,1478870601.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:22.344Z,1478870602.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:22.731Z,1478870602.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:22.792Z,1478870602.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:23.135Z,1478870603.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:23.535Z,1478870603.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:23.589Z,1478870603.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:23.945Z,1478870603.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:24.008Z,1478870604.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:24.321Z,1478870604.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:24.721Z,1478870604.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:24.804Z,1478870604.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:25.129Z,1478870605.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:25.527Z,1478870605.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:25.601Z,1478870605.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:25.932Z,1478870605.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:26.013Z,1478870606.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:26.393Z,1478870606.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:26.738Z,1478870606.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:26.808Z,1478870606.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:27.180Z,1478870607.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:27.589Z,1478870607.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:27.604Z,1478870607.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:27.921Z,1478870607.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:28.012Z,1478870608.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:28.354Z,1478870608.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:28.729Z,1478870608.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:28.808Z,1478870608.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:29.159Z,1478870609.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:29.555Z,1478870609.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:29.604Z,1478870609.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:29.933Z,1478870609.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:30.072Z,1478870610.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:30.328Z,1478870610.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:30.733Z,1478870610.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:30.868Z,1478870610.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:31.139Z,1478870611.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:31.535Z,1478870611.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:31.664Z,1478870611.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:31.942Z,1478870611.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:32.327Z,1478870612.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:32.452Z,1478870612.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:32.729Z,1478870612.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:33.127Z,1478870613.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:33.250Z,1478870613.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:33.526Z,1478870613.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:33.931Z,1478870613.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:34.045Z,1478870614.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:34.321Z,1478870614.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:34.456Z,1478870614.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:34.721Z,1478870614.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:35.133Z,1478870615.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:35.252Z,1478870615.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:35.609Z,1478870615.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:35.943Z,1478870615.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:35.984Z,1478870615.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:36.347Z,1478870616.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:36.725Z,1478870616.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:36.780Z,1478870616.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:37.129Z,1478870617.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:37.576Z,1478870617.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:37.590Z,1478870617.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:37.932Z,1478870617.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:37.988Z,1478870617.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:38.333Z,1478870618.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:38.739Z,1478870618.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:38.784Z,1478870618.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:39.137Z,1478870619.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:39.581Z,1478870619.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:39.606Z,1478870619.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:39.938Z,1478870619.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:39.988Z,1478870619.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:40.320Z,1478870620.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:40.721Z,1478870620.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:40.784Z,1478870620.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:41.117Z,1478870621.117 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T13:23:41.117Z,1478870621.118 [BPC1] Data Fault, FailCount= 1
2016-11-11T13:23:41.118Z,1478870621.118 [BPC1](ERROR): Data Fault
2016-11-11T13:23:41.126Z,1478870621.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:41.184Z,1478870621.184 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T13:23:41.580Z,1478870621.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:41.607Z,1478870621.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:41.934Z,1478870621.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:41.988Z,1478870621.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:42.324Z,1478870622.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:42.361Z,1478870622.361 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:23:42.361Z,1478870622.361 [BPC1] No Fault, FailCount= 1
2016-11-11T13:23:42.774Z,1478870622.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:42.784Z,1478870622.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:43.155Z,1478870623.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:43.535Z,1478870623.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:43.580Z,1478870623.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:43.933Z,1478870623.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:44.072Z,1478870624.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:44.328Z,1478870624.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:44.733Z,1478870624.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:44.868Z,1478870624.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:45.129Z,1478870625.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:45.533Z,1478870625.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:45.664Z,1478870625.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:45.930Z,1478870625.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:46.326Z,1478870626.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:46.416Z,1478870626.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:46.728Z,1478870626.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:47.127Z,1478870627.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:47.212Z,1478870627.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:47.540Z,1478870627.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:47.942Z,1478870627.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:48.009Z,1478870628.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:48.326Z,1478870628.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:48.440Z,1478870628.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:48.728Z,1478870628.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:49.133Z,1478870629.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:49.236Z,1478870629.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:49.581Z,1478870629.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:49.916Z,1478870629.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:49.968Z,1478870629.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:50.320Z,1478870630.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:50.724Z,1478870630.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:50.765Z,1478870630.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:51.129Z,1478870631.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:51.561Z,1478870631.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:51.605Z,1478870631.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:51.931Z,1478870631.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:51.972Z,1478870631.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:52.330Z,1478870632.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:52.729Z,1478870632.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:52.768Z,1478870632.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:53.129Z,1478870633.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:53.564Z,1478870633.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:53.582Z,1478870633.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:53.929Z,1478870633.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:53.972Z,1478870633.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:54.341Z,1478870634.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:54.716Z,1478870634.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:54.768Z,1478870634.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:55.184Z,1478870635.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:55.564Z,1478870635.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:55.605Z,1478870635.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:55.949Z,1478870635.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:55.972Z,1478870635.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:56.325Z,1478870636.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:56.761Z,1478870636.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:56.768Z,1478870636.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:57.165Z,1478870637.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:57.525Z,1478870637.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:57.564Z,1478870637.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:57.930Z,1478870637.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:58.044Z,1478870638.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:58.331Z,1478870638.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:58.729Z,1478870638.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:58.840Z,1478870638.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:59.124Z,1478870639.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:59.529Z,1478870639.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:23:59.636Z,1478870639.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:23:59.929Z,1478870639.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:00.343Z,1478870640.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:00.396Z,1478870640.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:00.741Z,1478870640.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:01.136Z,1478870641.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:01.192Z,1478870641.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:01.533Z,1478870641.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:01.920Z,1478870641.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:01.988Z,1478870641.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:02.329Z,1478870642.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:02.400Z,1478870642.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:02.725Z,1478870642.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:03.129Z,1478870643.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:03.196Z,1478870643.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:03.611Z,1478870643.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:03.924Z,1478870643.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:03.930Z,1478870643.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:04.329Z,1478870644.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:04.720Z,1478870644.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:04.745Z,1478870644.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:05.136Z,1478870645.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:05.516Z,1478870645.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:05.570Z,1478870645.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:05.929Z,1478870645.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:05.968Z,1478870645.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:06.325Z,1478870646.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:06.729Z,1478870646.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:06.764Z,1478870646.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:07.129Z,1478870647.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:07.560Z,1478870647.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:07.586Z,1478870647.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:07.937Z,1478870647.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:07.968Z,1478870647.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:08.337Z,1478870648.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:08.734Z,1478870648.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:08.764Z,1478870648.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:09.560Z,1478870649.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:09.968Z,1478870649.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:10.764Z,1478870650.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:11.560Z,1478870651.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:12.018Z,1478870652.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:12.219Z,1478870652.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:12.334Z,1478870652.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:12.730Z,1478870652.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:12.812Z,1478870652.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:13.141Z,1478870653.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:13.508Z,1478870653.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:13.608Z,1478870653.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:14.017Z,1478870654.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:14.334Z,1478870654.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:14.376Z,1478870654.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:14.710Z,1478870654.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:15.121Z,1478870655.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:15.172Z,1478870655.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:15.520Z,1478870655.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:15.917Z,1478870655.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:15.969Z,1478870655.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:16.304Z,1478870656.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:16.388Z,1478870656.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:16.714Z,1478870656.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:17.115Z,1478870657.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:17.184Z,1478870657.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:17.554Z,1478870657.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:17.909Z,1478870657.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:17.940Z,1478870657.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:18.313Z,1478870658.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:18.713Z,1478870658.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:18.744Z,1478870658.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:19.119Z,1478870659.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:19.540Z,1478870659.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:19.579Z,1478870659.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:19.917Z,1478870659.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:19.948Z,1478870659.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:20.317Z,1478870660.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:20.710Z,1478870660.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:20.744Z,1478870660.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:21.127Z,1478870661.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:21.540Z,1478870661.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:21.590Z,1478870661.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:21.933Z,1478870661.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:21.948Z,1478870661.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:22.329Z,1478870662.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:22.701Z,1478870662.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:22.744Z,1478870662.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:23.117Z,1478870663.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:23.540Z,1478870663.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:23.561Z,1478870663.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:23.909Z,1478870663.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:23.948Z,1478870663.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:24.317Z,1478870664.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:24.717Z,1478870664.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:24.744Z,1478870664.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:25.118Z,1478870665.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:25.517Z,1478870665.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:25.540Z,1478870665.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:25.921Z,1478870665.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:25.996Z,1478870665.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:26.358Z,1478870666.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:26.753Z,1478870666.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:26.792Z,1478870666.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:27.135Z,1478870667.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:27.538Z,1478870667.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:27.588Z,1478870667.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:27.981Z,1478870667.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:28.341Z,1478870668.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:28.385Z,1478870668.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:28.745Z,1478870668.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:28.792Z,1478870668.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:29.118Z,1478870669.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:29.517Z,1478870669.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:29.588Z,1478870669.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:29.964Z,1478870669.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:30.305Z,1478870670.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:30.344Z,1478870670.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:30.705Z,1478870670.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:31.118Z,1478870671.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:31.140Z,1478870671.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:31.558Z,1478870671.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:31.888Z,1478870671.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:31.925Z,1478870671.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:32.317Z,1478870672.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:32.692Z,1478870672.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:32.714Z,1478870672.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:33.108Z,1478870673.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:33.488Z,1478870673.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:33.544Z,1478870673.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:33.910Z,1478870673.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:33.920Z,1478870673.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:34.333Z,1478870674.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:34.710Z,1478870674.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:34.716Z,1478870674.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:35.110Z,1478870675.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:35.512Z,1478870675.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:35.566Z,1478870675.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:35.920Z,1478870675.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:35.936Z,1478870675.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:36.325Z,1478870676.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:36.716Z,1478870676.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:36.733Z,1478870676.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:37.129Z,1478870677.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:37.512Z,1478870677.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:37.542Z,1478870677.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:37.911Z,1478870677.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:37.920Z,1478870677.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:38.313Z,1478870678.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:38.711Z,1478870678.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:38.716Z,1478870678.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:39.116Z,1478870679.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:39.512Z,1478870679.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:39.542Z,1478870679.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:39.912Z,1478870679.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:39.992Z,1478870679.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:40.349Z,1478870680.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:40.729Z,1478870680.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:40.788Z,1478870680.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:41.153Z,1478870681.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:41.525Z,1478870681.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:41.584Z,1478870681.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:42.005Z,1478870682.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:42.308Z,1478870682.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:42.360Z,1478870682.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:42.746Z,1478870682.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:43.139Z,1478870683.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:43.156Z,1478870683.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:43.512Z,1478870683.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:43.952Z,1478870683.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:43.972Z,1478870683.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:44.318Z,1478870684.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:44.360Z,1478870684.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:44.710Z,1478870684.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:45.117Z,1478870685.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:45.156Z,1478870685.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:45.556Z,1478870685.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:45.856Z,1478870685.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:45.929Z,1478870685.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:46.322Z,1478870686.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:46.652Z,1478870686.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:46.724Z,1478870686.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:47.129Z,1478870687.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:47.449Z,1478870687.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:47.541Z,1478870687.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:47.860Z,1478870687.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:47.922Z,1478870687.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:48.320Z,1478870688.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:48.656Z,1478870688.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:48.720Z,1478870688.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:49.129Z,1478870689.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:49.453Z,1478870689.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:49.537Z,1478870689.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:49.884Z,1478870689.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:49.905Z,1478870689.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:50.308Z,1478870690.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:50.680Z,1478870690.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:50.721Z,1478870690.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:51.122Z,1478870691.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:51.476Z,1478870691.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:51.540Z,1478870691.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:51.884Z,1478870691.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:51.937Z,1478870691.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:52.322Z,1478870692.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:52.680Z,1478870692.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:52.727Z,1478870692.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:53.113Z,1478870693.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:53.476Z,1478870693.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:53.587Z,1478870693.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:53.908Z,1478870693.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:53.944Z,1478870693.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:54.309Z,1478870694.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:54.713Z,1478870694.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:54.740Z,1478870694.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:55.146Z,1478870695.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:55.514Z,1478870695.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:55.536Z,1478870695.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:55.989Z,1478870695.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:56.312Z,1478870696.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:56.339Z,1478870696.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:56.733Z,1478870696.733 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:56.733Z,1478870696.733 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 152
2016-11-11T13:24:56.733Z,1478870696.733 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:24:56.740Z,1478870696.740 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:56.740Z,1478870696.740 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 152
2016-11-11T13:24:56.740Z,1478870696.740 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:24:56.742Z,1478870696.742 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:56.742Z,1478870696.742 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 152
2016-11-11T13:24:56.742Z,1478870696.742 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:24:56.777Z,1478870696.777 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:24:56.777Z,1478870696.777 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:24:56.777Z,1478870696.777 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:24:57.108Z,1478870697.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:57.162Z,1478870697.162 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:24:57.162Z,1478870697.162 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 152
2016-11-11T13:24:57.167Z,1478870697.167 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:24:57.168Z,1478870697.168 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 152
2016-11-11T13:24:57.168Z,1478870697.168 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:24:57.168Z,1478870697.168 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 152
2016-11-11T13:24:57.512Z,1478870697.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:24:57.512Z,1478870697.512 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:24:57.512Z,1478870697.513 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:24:57.556Z,1478870697.556 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:24:57.557Z,1478870697.556 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:24:57.557Z,1478870697.557 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:24:57.557Z,1478870697.557 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:24:57.558Z,1478870697.558 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:24:57.558Z,1478870697.558 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:24:57.905Z,1478870697.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:57.989Z,1478870697.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:58.304Z,1478870698.304 [BPC1](ERROR): Failed to receive battery data
2016-11-11T13:24:58.304Z,1478870698.304 [BPC1] Communications Fault, FailCount= 1
2016-11-11T13:24:58.304Z,1478870698.304 [BPC1](ERROR): Communications Fault
2016-11-11T13:24:58.312Z,1478870698.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:58.316Z,1478870698.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:58.362Z,1478870698.362 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T13:24:58.709Z,1478870698.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:59.112Z,1478870699.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:59.122Z,1478870699.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:59.518Z,1478870699.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:24:59.567Z,1478870699.567 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:24:59.567Z,1478870699.567 [BPC1] No Fault, FailCount= 1
2016-11-11T13:24:59.832Z,1478870699.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:24:59.970Z,1478870699.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:00.337Z,1478870700.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:00.628Z,1478870700.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:00.713Z,1478870700.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:01.130Z,1478870701.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:01.425Z,1478870701.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:01.535Z,1478870701.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:01.836Z,1478870701.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:01.930Z,1478870701.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:02.328Z,1478870702.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:02.632Z,1478870702.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:02.721Z,1478870702.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:03.113Z,1478870703.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:03.444Z,1478870703.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:03.525Z,1478870703.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:03.871Z,1478870703.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:03.922Z,1478870703.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:04.307Z,1478870704.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:04.668Z,1478870704.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:04.718Z,1478870704.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:05.117Z,1478870705.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:05.464Z,1478870705.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:05.553Z,1478870705.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:05.872Z,1478870705.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:05.922Z,1478870705.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:06.361Z,1478870706.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:06.668Z,1478870706.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:06.723Z,1478870706.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:07.164Z,1478870707.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:07.464Z,1478870707.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:07.647Z,1478870707.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:07.913Z,1478870707.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:07.936Z,1478870707.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:08.313Z,1478870708.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:08.709Z,1478870708.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:08.744Z,1478870708.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:09.109Z,1478870709.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:09.540Z,1478870709.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:10.296Z,1478870710.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:11.092Z,1478870711.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:11.889Z,1478870711.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:12.300Z,1478870712.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:12.573Z,1478870712.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:12.725Z,1478870712.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:13.096Z,1478870713.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:13.104Z,1478870713.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:13.506Z,1478870713.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:13.812Z,1478870713.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:13.890Z,1478870713.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:14.293Z,1478870714.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:14.608Z,1478870714.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:14.697Z,1478870714.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:15.102Z,1478870715.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:15.405Z,1478870715.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:15.502Z,1478870715.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:15.816Z,1478870715.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:15.917Z,1478870715.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:16.309Z,1478870716.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:16.612Z,1478870716.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:16.701Z,1478870716.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:17.106Z,1478870717.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:17.409Z,1478870717.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:17.490Z,1478870717.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:17.820Z,1478870717.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:17.918Z,1478870717.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:18.284Z,1478870718.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:18.616Z,1478870718.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:18.686Z,1478870718.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:19.093Z,1478870719.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:19.413Z,1478870719.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:19.509Z,1478870719.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:19.824Z,1478870719.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:19.929Z,1478870719.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:20.299Z,1478870720.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:20.620Z,1478870720.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:20.730Z,1478870720.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:21.098Z,1478870721.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:21.416Z,1478870721.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:21.562Z,1478870721.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:21.906Z,1478870721.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:21.936Z,1478870721.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:22.296Z,1478870722.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:22.693Z,1478870722.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:22.732Z,1478870722.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:23.096Z,1478870723.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:23.496Z,1478870723.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:23.528Z,1478870723.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:23.946Z,1478870723.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:24.292Z,1478870724.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:24.305Z,1478870724.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:24.685Z,1478870724.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:25.088Z,1478870725.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:25.111Z,1478870725.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:25.520Z,1478870725.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:25.888Z,1478870725.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:25.946Z,1478870725.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:26.296Z,1478870726.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:26.320Z,1478870726.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:26.690Z,1478870726.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:27.092Z,1478870727.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:27.095Z,1478870727.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:27.489Z,1478870727.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:27.788Z,1478870727.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:27.898Z,1478870727.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:28.297Z,1478870728.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:28.584Z,1478870728.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:28.697Z,1478870728.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:29.098Z,1478870729.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:29.381Z,1478870729.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:29.497Z,1478870729.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:29.792Z,1478870729.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:29.894Z,1478870729.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:30.310Z,1478870730.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:30.588Z,1478870730.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:30.709Z,1478870730.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:31.106Z,1478870731.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:31.387Z,1478870731.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:31.525Z,1478870731.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:31.800Z,1478870731.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:31.905Z,1478870731.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:32.325Z,1478870732.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:32.596Z,1478870732.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:32.696Z,1478870732.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:33.093Z,1478870733.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:33.393Z,1478870733.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:33.493Z,1478870733.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:33.804Z,1478870733.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:33.897Z,1478870733.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:34.329Z,1478870734.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:34.600Z,1478870734.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:34.697Z,1478870734.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:35.136Z,1478870735.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:35.396Z,1478870735.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:35.566Z,1478870735.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:35.900Z,1478870735.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:35.940Z,1478870735.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:36.337Z,1478870736.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:36.696Z,1478870736.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:36.704Z,1478870736.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:37.097Z,1478870737.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:37.492Z,1478870737.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:37.504Z,1478870737.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:37.910Z,1478870737.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:38.254Z,1478870738.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:38.302Z,1478870738.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:38.701Z,1478870738.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:39.048Z,1478870739.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:39.094Z,1478870739.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:39.506Z,1478870739.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:39.845Z,1478870739.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:39.937Z,1478870739.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:40.256Z,1478870740.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:40.307Z,1478870740.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:40.713Z,1478870740.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:41.052Z,1478870741.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:41.102Z,1478870741.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:41.487Z,1478870741.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:41.772Z,1478870741.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:41.890Z,1478870741.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:42.293Z,1478870742.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:42.568Z,1478870742.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:42.689Z,1478870742.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:43.086Z,1478870743.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:43.365Z,1478870743.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:43.501Z,1478870743.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:43.776Z,1478870743.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:43.891Z,1478870743.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:44.305Z,1478870744.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:44.572Z,1478870744.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:44.702Z,1478870744.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:45.090Z,1478870745.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:45.375Z,1478870745.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:45.493Z,1478870745.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:45.800Z,1478870745.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:45.905Z,1478870745.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:46.297Z,1478870746.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:46.596Z,1478870746.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:46.699Z,1478870746.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:47.125Z,1478870747.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:47.392Z,1478870747.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:47.497Z,1478870747.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:47.800Z,1478870747.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:47.908Z,1478870747.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:48.270Z,1478870748.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:48.333Z,1478870748.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:48.597Z,1478870748.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:48.670Z,1478870748.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:48.694Z,1478870748.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:49.072Z,1478870749.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:49.087Z,1478870749.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:49.392Z,1478870749.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:49.526Z,1478870749.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:49.581Z,1478870749.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:49.868Z,1478870749.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:49.880Z,1478870749.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:49.897Z,1478870749.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:50.272Z,1478870750.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:50.328Z,1478870750.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:50.676Z,1478870750.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:50.677Z,1478870750.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:50.725Z,1478870750.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:51.068Z,1478870751.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:51.100Z,1478870751.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:51.472Z,1478870751.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:51.473Z,1478870751.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:51.489Z,1478870751.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:51.867Z,1478870751.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:51.915Z,1478870751.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:52.220Z,1478870752.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:52.265Z,1478870752.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:52.298Z,1478870752.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:52.665Z,1478870752.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:52.701Z,1478870752.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:53.016Z,1478870753.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:53.084Z,1478870753.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:53.113Z,1478870753.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:53.476Z,1478870753.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:53.509Z,1478870753.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:53.813Z,1478870753.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:53.875Z,1478870753.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:53.910Z,1478870753.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:54.224Z,1478870754.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:54.270Z,1478870754.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:54.301Z,1478870754.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:54.665Z,1478870754.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:54.701Z,1478870754.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:55.020Z,1478870755.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:55.069Z,1478870755.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:55.112Z,1478870755.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:55.465Z,1478870755.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:55.485Z,1478870755.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:55.748Z,1478870755.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:55.870Z,1478870755.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:55.901Z,1478870755.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:56.269Z,1478870756.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:56.290Z,1478870756.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:56.544Z,1478870756.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:56.696Z,1478870756.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:57.109Z,1478870757.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:57.341Z,1478870757.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:57.509Z,1478870757.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:57.752Z,1478870757.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:57.901Z,1478870757.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:58.297Z,1478870758.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:58.548Z,1478870758.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:58.700Z,1478870758.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:59.102Z,1478870759.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:59.345Z,1478870759.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:59.498Z,1478870759.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:25:59.518Z,1478870759.518 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T13:25:59.756Z,1478870759.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:25:59.901Z,1478870759.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:00.270Z,1478870760.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:00.302Z,1478870760.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:00.552Z,1478870760.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:00.665Z,1478870760.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:00.705Z,1478870760.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:01.065Z,1478870761.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:01.085Z,1478870761.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:01.350Z,1478870761.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:01.488Z,1478870761.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:01.541Z,1478870761.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:01.768Z,1478870761.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:01.876Z,1478870761.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:01.892Z,1478870761.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:02.280Z,1478870762.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:02.301Z,1478870762.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:02.564Z,1478870762.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:02.688Z,1478870762.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:02.749Z,1478870762.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:03.068Z,1478870763.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:03.101Z,1478870763.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:03.362Z,1478870763.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:03.488Z,1478870763.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:03.528Z,1478870763.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:03.856Z,1478870763.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:03.866Z,1478870763.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:03.929Z,1478870763.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:04.273Z,1478870764.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:04.295Z,1478870764.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:04.654Z,1478870764.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:04.666Z,1478870764.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:04.714Z,1478870764.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:05.066Z,1478870765.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:05.130Z,1478870765.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:05.449Z,1478870765.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:05.480Z,1478870765.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:05.496Z,1478870765.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:05.867Z,1478870765.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:05.903Z,1478870765.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:06.200Z,1478870766.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:06.267Z,1478870766.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:06.294Z,1478870766.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:06.684Z,1478870766.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:06.712Z,1478870766.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:06.996Z,1478870766.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:07.080Z,1478870767.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:07.104Z,1478870767.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:07.484Z,1478870767.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:07.517Z,1478870767.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:07.793Z,1478870767.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:07.877Z,1478870767.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:07.899Z,1478870767.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:08.204Z,1478870768.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:08.269Z,1478870768.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:08.306Z,1478870768.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:08.665Z,1478870768.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:08.701Z,1478870768.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:08.000Z,1478870769.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:09.065Z,1478870769.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:09.101Z,1478870769.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:09.470Z,1478870769.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:09.513Z,1478870769.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:09.724Z,1478870769.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:10.520Z,1478870770.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:11.317Z,1478870771.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:11.728Z,1478870771.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:12.524Z,1478870772.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:12.906Z,1478870772.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:12.922Z,1478870772.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:13.032Z,1478870773.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:13.065Z,1478870773.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:13.321Z,1478870773.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:13.451Z,1478870773.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:13.467Z,1478870773.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:13.732Z,1478870773.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:13.840Z,1478870773.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:13.869Z,1478870773.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:14.221Z,1478870774.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:14.241Z,1478870774.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:14.528Z,1478870774.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:14.625Z,1478870774.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:14.640Z,1478870774.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:15.028Z,1478870775.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:15.043Z,1478870775.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:15.325Z,1478870775.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:15.433Z,1478870775.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:15.453Z,1478870775.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:15.736Z,1478870775.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:15.824Z,1478870775.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:15.881Z,1478870775.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:16.222Z,1478870776.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:16.257Z,1478870776.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:16.532Z,1478870776.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:16.621Z,1478870776.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:16.657Z,1478870776.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:17.021Z,1478870777.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:17.057Z,1478870777.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:17.328Z,1478870777.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:17.449Z,1478870777.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:17.530Z,1478870777.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:17.832Z,1478870777.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:17.856Z,1478870777.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:17.868Z,1478870777.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:18.236Z,1478870778.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:18.278Z,1478870778.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:18.636Z,1478870778.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:18.664Z,1478870778.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:18.671Z,1478870778.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:19.021Z,1478870779.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:19.073Z,1478870779.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:19.421Z,1478870779.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:19.460Z,1478870779.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:19.475Z,1478870779.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:19.830Z,1478870779.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:19.861Z,1478870779.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:20.176Z,1478870780.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:20.229Z,1478870780.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:20.253Z,1478870780.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:20.621Z,1478870780.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:20.653Z,1478870780.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:20.972Z,1478870780.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:21.022Z,1478870781.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:21.061Z,1478870781.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:21.422Z,1478870781.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:21.449Z,1478870781.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:21.769Z,1478870781.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:21.828Z,1478870781.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:21.860Z,1478870781.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:22.180Z,1478870782.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:22.240Z,1478870782.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:22.275Z,1478870782.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:22.632Z,1478870782.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:22.665Z,1478870782.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:22.976Z,1478870782.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:23.036Z,1478870783.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:23.069Z,1478870783.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:23.453Z,1478870783.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:23.473Z,1478870783.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:23.708Z,1478870783.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:23.822Z,1478870783.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:23.841Z,1478870783.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:24.225Z,1478870784.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:24.245Z,1478870784.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:24.504Z,1478870784.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:24.629Z,1478870784.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:24.645Z,1478870784.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:25.025Z,1478870785.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:25.045Z,1478870785.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:25.308Z,1478870785.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:25.430Z,1478870785.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:25.445Z,1478870785.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:25.728Z,1478870785.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:25.829Z,1478870785.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:25.844Z,1478870785.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:26.229Z,1478870786.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:26.249Z,1478870786.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:26.524Z,1478870786.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:26.624Z,1478870786.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:26.647Z,1478870786.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:27.024Z,1478870787.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:27.052Z,1478870787.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:27.321Z,1478870787.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:27.442Z,1478870787.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:27.465Z,1478870787.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:27.736Z,1478870787.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:27.836Z,1478870787.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:27.858Z,1478870787.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:28.240Z,1478870788.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:28.268Z,1478870788.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:28.534Z,1478870788.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:28.636Z,1478870788.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:28.658Z,1478870788.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:29.021Z,1478870789.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:29.052Z,1478870789.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:29.328Z,1478870789.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:29.430Z,1478870789.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:29.457Z,1478870789.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:29.740Z,1478870789.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:29.830Z,1478870789.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:29.856Z,1478870789.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:30.221Z,1478870790.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:30.279Z,1478870790.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:30.538Z,1478870790.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:30.626Z,1478870790.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:30.659Z,1478870790.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:31.022Z,1478870791.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:31.037Z,1478870791.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:31.332Z,1478870791.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:31.438Z,1478870791.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:31.521Z,1478870791.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:31.829Z,1478870791.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:31.832Z,1478870791.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:31.871Z,1478870791.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:32.225Z,1478870792.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:32.245Z,1478870792.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:32.630Z,1478870792.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:32.636Z,1478870792.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:32.685Z,1478870792.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:33.036Z,1478870793.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:33.067Z,1478870793.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:33.424Z,1478870793.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:33.437Z,1478870793.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:33.489Z,1478870793.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:33.832Z,1478870793.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:33.877Z,1478870793.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:34.160Z,1478870794.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:34.230Z,1478870794.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:34.254Z,1478870794.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:34.632Z,1478870794.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:34.647Z,1478870794.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:34.956Z,1478870794.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:35.033Z,1478870795.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:35.053Z,1478870795.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:35.434Z,1478870795.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:35.450Z,1478870795.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:35.757Z,1478870795.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:35.831Z,1478870795.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:35.852Z,1478870795.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:36.168Z,1478870796.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:36.221Z,1478870796.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:36.253Z,1478870796.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:36.622Z,1478870796.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:36.654Z,1478870796.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:36.964Z,1478870796.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:37.022Z,1478870797.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:37.057Z,1478870797.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:37.420Z,1478870797.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:37.457Z,1478870797.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:37.684Z,1478870797.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:37.844Z,1478870797.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:37.864Z,1478870797.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:38.232Z,1478870798.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:38.268Z,1478870798.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:38.480Z,1478870798.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:38.644Z,1478870798.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:38.660Z,1478870798.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:39.040Z,1478870799.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:39.072Z,1478870799.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:39.277Z,1478870799.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:39.430Z,1478870799.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:39.456Z,1478870799.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:39.688Z,1478870799.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:39.830Z,1478870799.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:39.861Z,1478870799.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:40.222Z,1478870800.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:40.257Z,1478870800.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:40.484Z,1478870800.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:40.622Z,1478870800.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:40.638Z,1478870800.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:41.023Z,1478870801.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:41.039Z,1478870801.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:41.284Z,1478870801.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:41.422Z,1478870801.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:41.442Z,1478870801.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:41.712Z,1478870801.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:41.826Z,1478870801.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:41.850Z,1478870801.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:42.233Z,1478870802.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:42.250Z,1478870802.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:42.508Z,1478870802.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:42.630Z,1478870802.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:42.645Z,1478870802.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:43.040Z,1478870803.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:43.068Z,1478870803.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:43.304Z,1478870803.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:43.446Z,1478870803.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:43.462Z,1478870803.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:43.712Z,1478870803.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:43.844Z,1478870803.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:43.860Z,1478870803.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:44.240Z,1478870804.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:44.262Z,1478870804.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:44.508Z,1478870804.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:44.621Z,1478870804.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:44.685Z,1478870804.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:45.022Z,1478870805.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:45.065Z,1478870805.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:45.304Z,1478870805.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:45.432Z,1478870805.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:45.468Z,1478870805.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:45.780Z,1478870805.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:45.821Z,1478870805.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:45.841Z,1478870805.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:46.222Z,1478870806.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:46.281Z,1478870806.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:46.576Z,1478870806.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:46.630Z,1478870806.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:46.654Z,1478870806.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:47.028Z,1478870807.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:47.077Z,1478870807.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:47.372Z,1478870807.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:47.426Z,1478870807.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:47.454Z,1478870807.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:47.829Z,1478870807.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:47.883Z,1478870807.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:48.136Z,1478870808.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:48.243Z,1478870808.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:48.285Z,1478870808.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:48.664Z,1478870808.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:48.688Z,1478870808.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:48.932Z,1478870808.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:49.044Z,1478870809.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:49.059Z,1478870809.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:49.442Z,1478870809.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:49.457Z,1478870809.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:49.729Z,1478870809.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:49.821Z,1478870809.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:49.853Z,1478870809.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:50.140Z,1478870810.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:50.221Z,1478870810.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:50.249Z,1478870810.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:50.621Z,1478870810.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:50.653Z,1478870810.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:50.936Z,1478870810.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:51.022Z,1478870811.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:51.053Z,1478870811.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:51.421Z,1478870811.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:51.447Z,1478870811.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:51.660Z,1478870811.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:51.836Z,1478870811.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:51.857Z,1478870811.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:52.221Z,1478870812.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:52.253Z,1478870812.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:52.456Z,1478870812.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:52.621Z,1478870812.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:52.653Z,1478870812.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:53.022Z,1478870813.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:53.100Z,1478870813.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:53.253Z,1478870813.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:53.451Z,1478870813.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:53.473Z,1478870813.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:53.664Z,1478870813.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:53.839Z,1478870813.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:53.855Z,1478870813.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:54.243Z,1478870814.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:54.265Z,1478870814.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:54.460Z,1478870814.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:54.644Z,1478870814.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:54.667Z,1478870814.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:55.026Z,1478870815.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:55.057Z,1478870815.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:55.257Z,1478870815.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:55.429Z,1478870815.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:55.462Z,1478870815.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:55.668Z,1478870815.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:55.822Z,1478870815.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:55.861Z,1478870815.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:56.225Z,1478870816.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:56.242Z,1478870816.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:56.464Z,1478870816.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:56.624Z,1478870816.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:56.641Z,1478870816.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:57.028Z,1478870817.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:57.043Z,1478870817.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:57.276Z,1478870817.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:57.433Z,1478870817.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:57.449Z,1478870817.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:57.692Z,1478870817.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:57.832Z,1478870817.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:57.848Z,1478870817.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:58.229Z,1478870818.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:58.245Z,1478870818.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:58.488Z,1478870818.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:58.644Z,1478870818.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:58.660Z,1478870818.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:59.039Z,1478870819.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:59.105Z,1478870819.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:59.284Z,1478870819.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:59.450Z,1478870819.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:59.465Z,1478870819.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:26:59.764Z,1478870819.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:59.859Z,1478870819.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:26:59.874Z,1478870819.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:00.221Z,1478870820.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:00.273Z,1478870820.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:00.560Z,1478870820.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:00.630Z,1478870820.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:00.645Z,1478870820.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:01.025Z,1478870821.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:01.077Z,1478870821.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:01.358Z,1478870821.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:01.428Z,1478870821.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:01.444Z,1478870821.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:01.828Z,1478870821.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:01.880Z,1478870821.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:02.116Z,1478870822.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:02.227Z,1478870822.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:02.280Z,1478870822.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:02.629Z,1478870822.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:02.649Z,1478870822.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:02.914Z,1478870822.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:03.033Z,1478870823.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:03.053Z,1478870823.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:03.433Z,1478870823.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:03.448Z,1478870823.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:03.712Z,1478870823.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:03.844Z,1478870823.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:03.865Z,1478870823.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:04.144Z,1478870824.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:04.240Z,1478870824.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:04.264Z,1478870824.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:04.646Z,1478870824.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:04.662Z,1478870824.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:04.940Z,1478870824.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:05.035Z,1478870825.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:05.066Z,1478870825.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:05.421Z,1478870825.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:05.452Z,1478870825.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:05.644Z,1478870825.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:05.823Z,1478870825.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:05.859Z,1478870825.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:06.221Z,1478870826.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:06.241Z,1478870826.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:06.440Z,1478870826.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:06.621Z,1478870826.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:06.641Z,1478870826.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:07.025Z,1478870827.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:07.045Z,1478870827.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:07.242Z,1478870827.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:07.433Z,1478870827.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:07.453Z,1478870827.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:07.668Z,1478870827.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:07.830Z,1478870827.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:07.845Z,1478870827.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:08.231Z,1478870828.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:08.247Z,1478870828.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:08.464Z,1478870828.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:08.632Z,1478870828.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:08.647Z,1478870828.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:08.657Z,1478870828.657 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T13:22:08.3Z
2016-11-11T13:27:08.657Z,1478870828.657 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T13:27:08.657Z,1478870828.657 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T13:27:09.043Z,1478870829.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:09.065Z,1478870829.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:09.261Z,1478870829.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:09.672Z,1478870829.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:09.940Z,1478870829.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:09.956Z,1478870829.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:10.072Z,1478870830.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:10.098Z,1478870830.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:10.468Z,1478870830.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:11.264Z,1478870831.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:11.672Z,1478870831.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:12.468Z,1478870832.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:13.264Z,1478870833.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:13.595Z,1478870833.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:13.657Z,1478870833.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:13.710Z,1478870833.710 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0200.lzma
2016-11-11T13:27:13.752Z,1478870833.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:13.758Z,1478870833.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:13.793Z,1478870833.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:14.129Z,1478870834.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:14.209Z,1478870834.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:14.509Z,1478870834.509 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0200.lzma.bak
2016-11-11T13:27:14.509Z,1478870834.509 [DataOverHttps](INFO): SBD MOMSN=4555443
2016-11-11T13:27:14.548Z,1478870834.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:14.549Z,1478870834.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:14.571Z,1478870834.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:15.344Z,1478870835.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:15.890Z,1478870835.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:15.945Z,1478870835.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:16.056Z,1478870836.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:16.072Z,1478870836.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:16.088Z,1478870836.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:16.885Z,1478870836.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:17.681Z,1478870837.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:18.100Z,1478870838.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:18.896Z,1478870838.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:19.648Z,1478870839.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:19.704Z,1478870839.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:19.753Z,1478870839.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:19.857Z,1478870839.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:19.905Z,1478870839.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:20.213Z,1478870840.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:20.265Z,1478870840.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:20.444Z,1478870840.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:20.623Z,1478870840.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:20.658Z,1478870840.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:21.021Z,1478870841.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:21.052Z,1478870841.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:21.240Z,1478870841.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:21.428Z,1478870841.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:21.461Z,1478870841.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:21.652Z,1478870841.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:22.449Z,1478870842.450 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:23.244Z,1478870843.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:23.656Z,1478870843.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:24.452Z,1478870844.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:25.250Z,1478870845.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:25.561Z,1478870845.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:25.593Z,1478870845.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:25.668Z,1478870845.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:25.698Z,1478870845.698 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20161111T044527/Express0201.lzma
2016-11-11T13:27:25.767Z,1478870845.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:25.850Z,1478870845.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:26.114Z,1478870846.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:26.153Z,1478870846.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:26.464Z,1478870846.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:26.482Z,1478870846.482 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0201.lzma.bak
2016-11-11T13:27:26.482Z,1478870846.482 [DataOverHttps](INFO): SBD MOMSN=4555445
2016-11-11T13:27:26.523Z,1478870846.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:26.565Z,1478870846.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:27.265Z,1478870847.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:27.712Z,1478870847.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:28.508Z,1478870848.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:29.247Z,1478870849.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:29.300Z,1478870849.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:29.304Z,1478870849.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:29.319Z,1478870849.319 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T13:27:29.327Z,1478870849.327 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T13:27:29.327Z,1478870849.327 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T13:27:29.432Z,1478870849.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:29.488Z,1478870849.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:30.052Z,1478870850.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:30.848Z,1478870850.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:31.644Z,1478870851.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:32.060Z,1478870852.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:32.856Z,1478870852.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:33.585Z,1478870853.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:34.380Z,1478870854.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:35.177Z,1478870855.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:35.592Z,1478870855.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:35.849Z,1478870855.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:35.906Z,1478870855.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:36.062Z,1478870856.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:36.113Z,1478870856.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:36.388Z,1478870856.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:36.416Z,1478870856.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:36.456Z,1478870856.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:36.877Z,1478870856.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:37.184Z,1478870857.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:37.246Z,1478870857.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:37.594Z,1478870857.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:37.651Z,1478870857.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:38.079Z,1478870858.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:38.389Z,1478870858.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:38.436Z,1478870858.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:38.821Z,1478870858.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:39.184Z,1478870859.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:39.268Z,1478870859.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:39.594Z,1478870859.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:39.617Z,1478870859.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:40.021Z,1478870860.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:40.388Z,1478870860.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:40.420Z,1478870860.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:40.873Z,1478870860.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:41.184Z,1478870861.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:41.320Z,1478870861.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:41.653Z,1478870861.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:41.672Z,1478870861.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:42.042Z,1478870862.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:42.436Z,1478870862.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:42.468Z,1478870862.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:42.835Z,1478870862.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:43.243Z,1478870863.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:43.264Z,1478870863.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:43.706Z,1478870863.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:43.977Z,1478870863.977 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T13:27:44.020Z,1478870864.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:44.035Z,1478870864.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:44.472Z,1478870864.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:44.822Z,1478870864.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:44.838Z,1478870864.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:45.255Z,1478870865.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:45.617Z,1478870865.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:45.699Z,1478870865.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:46.028Z,1478870866.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:46.033Z,1478870866.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:46.449Z,1478870866.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:46.824Z,1478870866.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:46.850Z,1478870866.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:47.269Z,1478870867.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:47.544Z,1478870867.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:47.672Z,1478870867.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:48.030Z,1478870868.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:48.340Z,1478870868.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:48.434Z,1478870868.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:48.844Z,1478870868.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:49.137Z,1478870869.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:49.242Z,1478870869.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:49.552Z,1478870869.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:49.576Z,1478870869.576 [NAL9602](INFO): Powering down
2016-11-11T13:27:49.652Z,1478870869.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:50.085Z,1478870870.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:50.349Z,1478870870.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:50.486Z,1478870870.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:50.857Z,1478870870.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:51.145Z,1478870871.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:51.230Z,1478870871.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:51.646Z,1478870871.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:51.940Z,1478870871.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:52.043Z,1478870872.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:52.449Z,1478870872.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:52.736Z,1478870872.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:52.854Z,1478870872.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:53.214Z,1478870873.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:53.532Z,1478870873.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:53.626Z,1478870873.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:54.030Z,1478870874.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:54.328Z,1478870874.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:54.433Z,1478870874.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:54.841Z,1478870874.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:55.125Z,1478870875.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:55.256Z,1478870875.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:55.621Z,1478870875.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:55.921Z,1478870875.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:56.060Z,1478870876.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:56.454Z,1478870876.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:56.716Z,1478870876.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:56.817Z,1478870876.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:57.214Z,1478870877.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:57.512Z,1478870877.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:57.632Z,1478870877.632 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:57.632Z,1478870877.632 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 153
2016-11-11T13:27:57.632Z,1478870877.632 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:27:57.638Z,1478870877.638 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:57.638Z,1478870877.638 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 153
2016-11-11T13:27:57.639Z,1478870877.639 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:27:57.641Z,1478870877.641 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:57.641Z,1478870877.641 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 153
2016-11-11T13:27:57.641Z,1478870877.641 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:27:57.679Z,1478870877.680 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:27:57.680Z,1478870877.680 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:27:57.680Z,1478870877.680 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:27:58.042Z,1478870878.042 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:27:58.042Z,1478870878.042 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 153
2016-11-11T13:27:58.043Z,1478870878.043 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:27:58.043Z,1478870878.043 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 153
2016-11-11T13:27:58.044Z,1478870878.044 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:27:58.044Z,1478870878.044 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 153
2016-11-11T13:27:58.308Z,1478870878.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:58.406Z,1478870878.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:27:58.407Z,1478870878.407 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:27:58.407Z,1478870878.407 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:27:58.432Z,1478870878.432 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:27:58.432Z,1478870878.432 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:27:58.433Z,1478870878.432 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:27:58.433Z,1478870878.433 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:27:58.433Z,1478870878.433 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:27:58.434Z,1478870878.434 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:27:58.808Z,1478870878.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:59.104Z,1478870879.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:27:59.217Z,1478870879.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:59.720Z,1478870879.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:27:59.900Z,1478870879.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:00.017Z,1478870880.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:00.412Z,1478870880.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:00.696Z,1478870880.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:00.816Z,1478870880.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:01.215Z,1478870881.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:01.492Z,1478870881.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:01.624Z,1478870881.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:02.019Z,1478870882.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:02.288Z,1478870882.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:02.419Z,1478870882.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:02.817Z,1478870882.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:03.086Z,1478870883.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:03.215Z,1478870883.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:03.616Z,1478870883.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:03.880Z,1478870883.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:04.023Z,1478870884.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:04.418Z,1478870884.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:04.676Z,1478870884.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:04.873Z,1478870884.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:05.220Z,1478870885.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:05.472Z,1478870885.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:05.625Z,1478870885.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:06.054Z,1478870886.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:06.268Z,1478870886.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:06.416Z,1478870886.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:06.676Z,1478870886.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:06.805Z,1478870886.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:06.937Z,1478870886.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:07.090Z,1478870887.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:07.193Z,1478870887.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:07.258Z,1478870887.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:07.528Z,1478870887.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:07.604Z,1478870887.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:07.632Z,1478870887.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:07.936Z,1478870887.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:08.004Z,1478870888.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:08.027Z,1478870888.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:08.345Z,1478870888.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:08.393Z,1478870888.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:08.425Z,1478870888.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:08.752Z,1478870888.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:08.794Z,1478870888.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:08.817Z,1478870888.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:09.160Z,1478870889.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:09.223Z,1478870889.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:09.278Z,1478870889.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:09.568Z,1478870889.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:09.604Z,1478870889.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:09.641Z,1478870889.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:09.976Z,1478870889.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:10.012Z,1478870890.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:10.041Z,1478870890.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:10.386Z,1478870890.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:10.394Z,1478870890.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:10.426Z,1478870890.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:10.798Z,1478870890.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:10.833Z,1478870890.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:11.182Z,1478870891.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:11.196Z,1478870891.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:11.229Z,1478870891.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:11.637Z,1478870891.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:11.654Z,1478870891.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:11.976Z,1478870891.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:12.001Z,1478870892.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:12.016Z,1478870892.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:12.402Z,1478870892.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:12.417Z,1478870892.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:12.772Z,1478870892.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:12.802Z,1478870892.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:12.817Z,1478870892.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:13.200Z,1478870893.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:13.221Z,1478870893.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:13.576Z,1478870893.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:13.614Z,1478870893.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:13.645Z,1478870893.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:13.993Z,1478870893.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:14.024Z,1478870894.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:14.032Z,1478870894.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:14.393Z,1478870894.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:14.427Z,1478870894.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:14.793Z,1478870894.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:14.818Z,1478870894.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:14.828Z,1478870894.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:15.230Z,1478870895.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:15.496Z,1478870895.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:15.658Z,1478870895.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:16.022Z,1478870896.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:16.292Z,1478870896.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:16.428Z,1478870896.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:16.817Z,1478870896.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:17.089Z,1478870897.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:17.224Z,1478870897.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:17.501Z,1478870897.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:17.617Z,1478870897.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:18.021Z,1478870898.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:18.296Z,1478870898.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:18.417Z,1478870898.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:18.825Z,1478870898.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:19.098Z,1478870899.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:19.273Z,1478870899.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:19.532Z,1478870899.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:19.616Z,1478870899.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:20.051Z,1478870900.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:20.328Z,1478870900.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:20.414Z,1478870900.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:20.852Z,1478870900.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:21.124Z,1478870901.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:21.259Z,1478870901.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:21.532Z,1478870901.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:21.615Z,1478870901.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:22.021Z,1478870902.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:22.328Z,1478870902.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:22.415Z,1478870902.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:22.815Z,1478870902.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:23.124Z,1478870903.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:23.269Z,1478870903.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:23.626Z,1478870903.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:23.632Z,1478870903.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:24.016Z,1478870904.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:24.424Z,1478870904.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:24.428Z,1478870904.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:24.821Z,1478870904.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:25.216Z,1478870905.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:25.224Z,1478870905.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:25.641Z,1478870905.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:25.957Z,1478870905.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:26.031Z,1478870906.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:26.420Z,1478870906.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:26.752Z,1478870906.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:26.834Z,1478870906.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:27.235Z,1478870907.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:27.554Z,1478870907.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:27.646Z,1478870907.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:28.004Z,1478870908.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:28.010Z,1478870908.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:28.413Z,1478870908.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:28.800Z,1478870908.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:28.817Z,1478870908.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:29.219Z,1478870909.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:29.476Z,1478870909.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:29.616Z,1478870909.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:30.020Z,1478870910.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:30.272Z,1478870910.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:31.069Z,1478870911.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:31.480Z,1478870911.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:32.276Z,1478870912.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:33.073Z,1478870913.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:33.484Z,1478870913.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:33.581Z,1478870913.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:33.709Z,1478870913.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:34.102Z,1478870914.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:34.280Z,1478870914.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:34.486Z,1478870914.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:34.917Z,1478870914.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:35.077Z,1478870915.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:35.325Z,1478870915.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:35.488Z,1478870915.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:35.686Z,1478870915.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:36.077Z,1478870916.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:36.284Z,1478870916.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:36.489Z,1478870916.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:36.886Z,1478870916.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:37.080Z,1478870917.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:37.281Z,1478870917.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:37.592Z,1478870917.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:37.685Z,1478870917.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:38.090Z,1478870918.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:38.388Z,1478870918.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:38.483Z,1478870918.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:38.885Z,1478870918.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:39.184Z,1478870919.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:39.285Z,1478870919.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:39.677Z,1478870919.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:39.928Z,1478870919.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:40.084Z,1478870920.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:40.489Z,1478870920.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:40.724Z,1478870920.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:40.877Z,1478870920.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:41.284Z,1478870921.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:41.521Z,1478870921.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:41.685Z,1478870921.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:41.932Z,1478870921.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:42.084Z,1478870922.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:42.485Z,1478870922.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:42.728Z,1478870922.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:42.888Z,1478870922.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:43.276Z,1478870923.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:43.460Z,1478870923.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:43.685Z,1478870923.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:44.093Z,1478870924.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:44.256Z,1478870924.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:44.479Z,1478870924.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:44.876Z,1478870924.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:45.068Z,1478870925.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:45.278Z,1478870925.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:45.484Z,1478870925.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:45.685Z,1478870925.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:46.081Z,1478870926.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:46.280Z,1478870926.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:46.487Z,1478870926.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:46.909Z,1478870926.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:47.076Z,1478870927.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:47.302Z,1478870927.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:47.484Z,1478870927.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:47.685Z,1478870927.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:48.105Z,1478870928.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:48.280Z,1478870928.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:48.496Z,1478870928.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:48.917Z,1478870928.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:49.076Z,1478870929.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:49.301Z,1478870929.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:49.484Z,1478870929.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:49.681Z,1478870929.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:50.081Z,1478870930.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:50.280Z,1478870930.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:50.475Z,1478870930.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:50.875Z,1478870930.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:51.076Z,1478870931.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:51.287Z,1478870931.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:51.556Z,1478870931.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:51.680Z,1478870931.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:52.083Z,1478870932.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:52.352Z,1478870932.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:52.486Z,1478870932.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:52.888Z,1478870932.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:53.148Z,1478870933.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:53.285Z,1478870933.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:53.669Z,1478870933.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:53.912Z,1478870933.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:54.069Z,1478870934.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:54.473Z,1478870934.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:54.708Z,1478870934.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:54.876Z,1478870934.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:55.275Z,1478870935.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:55.504Z,1478870935.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:55.675Z,1478870935.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:55.916Z,1478870935.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:56.076Z,1478870936.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:56.477Z,1478870936.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:56.712Z,1478870936.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:56.887Z,1478870936.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:57.286Z,1478870937.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:57.448Z,1478870937.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:57.678Z,1478870937.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:58.085Z,1478870938.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:58.244Z,1478870938.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:58.484Z,1478870938.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:58.885Z,1478870938.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:59.041Z,1478870939.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:59.281Z,1478870939.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:28:59.460Z,1478870939.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:28:59.685Z,1478870939.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:00.076Z,1478870940.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:00.258Z,1478870940.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:00.483Z,1478870940.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:00.885Z,1478870940.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:01.053Z,1478870941.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:01.334Z,1478870941.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:01.472Z,1478870941.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:01.687Z,1478870941.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:02.089Z,1478870942.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:02.270Z,1478870942.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:02.501Z,1478870942.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:02.887Z,1478870942.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:03.064Z,1478870943.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:03.331Z,1478870943.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:03.476Z,1478870943.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:03.701Z,1478870943.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:04.094Z,1478870944.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:04.273Z,1478870944.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:04.492Z,1478870944.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:04.893Z,1478870944.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:05.068Z,1478870945.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:05.295Z,1478870945.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:05.548Z,1478870945.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:05.673Z,1478870945.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:06.074Z,1478870946.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:06.344Z,1478870946.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:06.477Z,1478870946.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:06.875Z,1478870946.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:07.140Z,1478870947.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:07.278Z,1478870947.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:07.681Z,1478870947.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:07.884Z,1478870947.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:08.085Z,1478870948.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:08.476Z,1478870948.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:08.680Z,1478870948.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:08.884Z,1478870948.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:09.286Z,1478870949.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:09.477Z,1478870949.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:09.676Z,1478870949.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:09.888Z,1478870949.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:10.089Z,1478870950.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:10.486Z,1478870950.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:10.684Z,1478870950.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:10.881Z,1478870950.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:11.285Z,1478870951.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:11.412Z,1478870951.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:11.685Z,1478870951.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:12.081Z,1478870952.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:12.208Z,1478870952.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:12.483Z,1478870952.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:12.882Z,1478870952.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:13.005Z,1478870953.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:13.284Z,1478870953.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:13.440Z,1478870953.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:13.687Z,1478870953.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:14.084Z,1478870954.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:14.236Z,1478870954.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:14.485Z,1478870954.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:14.887Z,1478870954.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:15.033Z,1478870955.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:15.288Z,1478870955.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:15.440Z,1478870955.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:15.726Z,1478870955.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:16.094Z,1478870956.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:16.236Z,1478870956.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:16.513Z,1478870956.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:16.892Z,1478870956.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:17.032Z,1478870957.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:17.325Z,1478870957.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:17.444Z,1478870957.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:17.720Z,1478870957.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:18.072Z,1478870958.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:18.242Z,1478870958.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:18.481Z,1478870958.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:18.881Z,1478870958.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:19.036Z,1478870959.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:19.283Z,1478870959.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:19.508Z,1478870959.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:19.682Z,1478870959.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:20.081Z,1478870960.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:20.305Z,1478870960.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:20.482Z,1478870960.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:20.884Z,1478870960.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:21.100Z,1478870961.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:21.288Z,1478870961.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:21.683Z,1478870961.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:21.872Z,1478870961.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:22.084Z,1478870962.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:22.478Z,1478870962.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:22.668Z,1478870962.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:22.873Z,1478870962.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:23.273Z,1478870963.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:23.470Z,1478870963.470 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:23.673Z,1478870963.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:23.880Z,1478870963.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:24.078Z,1478870964.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:24.486Z,1478870964.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:24.676Z,1478870964.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:24.875Z,1478870964.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:25.279Z,1478870965.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:25.392Z,1478870965.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:25.686Z,1478870965.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:26.083Z,1478870966.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:26.188Z,1478870966.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:26.480Z,1478870966.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:26.885Z,1478870966.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:26.985Z,1478870966.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:27.291Z,1478870967.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:27.396Z,1478870967.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:27.683Z,1478870967.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:28.081Z,1478870968.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:28.192Z,1478870968.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:28.478Z,1478870968.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:28.888Z,1478870968.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:28.989Z,1478870968.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:29.306Z,1478870969.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:29.400Z,1478870969.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:29.709Z,1478870969.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:30.086Z,1478870970.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:30.197Z,1478870970.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:30.993Z,1478870970.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:31.416Z,1478870971.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:32.214Z,1478870972.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:33.008Z,1478870973.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:33.488Z,1478870973.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:33.530Z,1478870973.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:33.661Z,1478870973.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:34.073Z,1478870974.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:34.284Z,1478870974.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:34.463Z,1478870974.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:34.831Z,1478870974.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:35.080Z,1478870975.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:35.236Z,1478870975.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:35.637Z,1478870975.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:35.844Z,1478870975.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:36.043Z,1478870976.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:36.440Z,1478870976.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:36.640Z,1478870976.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:36.832Z,1478870976.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:37.234Z,1478870977.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:37.437Z,1478870977.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:37.645Z,1478870977.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:37.848Z,1478870977.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:38.036Z,1478870978.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:38.432Z,1478870978.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:38.644Z,1478870978.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:38.843Z,1478870978.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:39.243Z,1478870979.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:39.374Z,1478870979.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:39.643Z,1478870979.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:40.043Z,1478870980.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:40.168Z,1478870980.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:40.434Z,1478870980.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:40.832Z,1478870980.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:40.965Z,1478870980.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:41.241Z,1478870981.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:41.376Z,1478870981.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:41.631Z,1478870981.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:42.036Z,1478870982.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:42.173Z,1478870982.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:42.437Z,1478870982.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:42.833Z,1478870982.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:42.969Z,1478870982.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:43.237Z,1478870983.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:43.380Z,1478870983.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:43.637Z,1478870983.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:44.029Z,1478870984.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:44.176Z,1478870984.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:44.429Z,1478870984.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:44.833Z,1478870984.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:44.973Z,1478870984.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:45.236Z,1478870985.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:45.384Z,1478870985.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:45.637Z,1478870985.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:46.070Z,1478870986.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:46.180Z,1478870986.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:46.468Z,1478870986.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:46.823Z,1478870986.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:46.976Z,1478870986.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:47.260Z,1478870987.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:47.500Z,1478870987.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:47.629Z,1478870987.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:48.065Z,1478870988.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:48.298Z,1478870988.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:48.455Z,1478870988.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:48.837Z,1478870988.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:49.092Z,1478870989.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:49.231Z,1478870989.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:49.639Z,1478870989.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:49.828Z,1478870989.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:50.038Z,1478870990.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:50.435Z,1478870990.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:50.624Z,1478870990.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:50.842Z,1478870990.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:51.232Z,1478870991.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:51.421Z,1478870991.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:51.643Z,1478870991.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:51.832Z,1478870991.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:52.041Z,1478870992.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:52.436Z,1478870992.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:52.630Z,1478870992.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:52.824Z,1478870992.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:53.250Z,1478870993.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:53.352Z,1478870993.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:53.629Z,1478870993.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:54.030Z,1478870994.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:54.148Z,1478870994.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:54.432Z,1478870994.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:54.833Z,1478870994.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:54.945Z,1478870994.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:55.230Z,1478870995.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:55.360Z,1478870995.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:55.636Z,1478870995.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:56.037Z,1478870996.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:56.156Z,1478870996.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:56.442Z,1478870996.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:56.840Z,1478870996.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:56.953Z,1478870996.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:57.229Z,1478870997.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:57.364Z,1478870997.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:57.628Z,1478870997.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:58.056Z,1478870998.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:58.160Z,1478870998.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:58.431Z,1478870998.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:58.832Z,1478870998.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:58.957Z,1478870998.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:59.242Z,1478870999.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:29:59.368Z,1478870999.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:29:59.643Z,1478870999.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:00.034Z,1478871000.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:00.164Z,1478871000.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:00.485Z,1478871000.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:00.870Z,1478871000.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:00.960Z,1478871000.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:01.237Z,1478871001.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:01.456Z,1478871001.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:01.681Z,1478871001.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:02.055Z,1478871002.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:02.252Z,1478871002.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:02.461Z,1478871002.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:02.871Z,1478871002.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:03.048Z,1478871003.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:03.235Z,1478871003.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:03.647Z,1478871003.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:03.804Z,1478871003.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:04.045Z,1478871004.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:04.445Z,1478871004.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:04.600Z,1478871004.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:04.848Z,1478871004.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:05.249Z,1478871005.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:05.397Z,1478871005.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:05.648Z,1478871005.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:05.808Z,1478871005.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:06.029Z,1478871006.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:06.457Z,1478871006.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:06.604Z,1478871006.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:06.835Z,1478871006.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:07.251Z,1478871007.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:07.328Z,1478871007.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:07.629Z,1478871007.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:08.056Z,1478871008.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:08.124Z,1478871008.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:08.430Z,1478871008.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:08.833Z,1478871008.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:08.921Z,1478871008.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:09.241Z,1478871009.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:09.332Z,1478871009.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:09.649Z,1478871009.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:10.041Z,1478871010.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:10.128Z,1478871010.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:10.445Z,1478871010.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:10.839Z,1478871010.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:10.925Z,1478871010.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:11.250Z,1478871011.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:11.336Z,1478871011.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:11.633Z,1478871011.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:12.034Z,1478871012.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:12.132Z,1478871012.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:12.442Z,1478871012.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:12.860Z,1478871012.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:12.928Z,1478871012.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:13.234Z,1478871013.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:13.344Z,1478871013.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:13.641Z,1478871013.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:14.037Z,1478871014.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:14.140Z,1478871014.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:14.437Z,1478871014.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:14.844Z,1478871014.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:14.936Z,1478871014.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:15.262Z,1478871015.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:15.424Z,1478871015.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:15.626Z,1478871015.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:16.051Z,1478871016.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:16.220Z,1478871016.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:16.432Z,1478871016.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:16.837Z,1478871016.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:17.016Z,1478871017.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:17.239Z,1478871017.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:17.649Z,1478871017.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:17.780Z,1478871017.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:18.026Z,1478871018.026 [BPC1](ERROR): Failed to receive battery data
2016-11-11T13:30:18.027Z,1478871018.027 [BPC1] Communications Fault, FailCount= 1
2016-11-11T13:30:18.027Z,1478871018.027 [BPC1](ERROR): Communications Fault
2016-11-11T13:30:18.035Z,1478871018.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:18.076Z,1478871018.076 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T13:30:18.441Z,1478871018.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:18.576Z,1478871018.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:18.836Z,1478871018.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:19.249Z,1478871019.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:19.298Z,1478871019.298 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:30:19.298Z,1478871019.298 [BPC1] No Fault, FailCount= 1
2016-11-11T13:30:19.373Z,1478871019.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:19.627Z,1478871019.627 [PNI_TCM](ERROR): CRC does not match. Expected:0x44761 got:0x7361
2016-11-11T13:30:19.698Z,1478871019.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:19.784Z,1478871019.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:20.074Z,1478871020.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:20.439Z,1478871020.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:20.580Z,1478871020.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:20.842Z,1478871020.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:21.218Z,1478871021.218 [PNI_TCM](ERROR): CRC does not match. Expected:0x34522 got:0x24347
2016-11-11T13:30:21.254Z,1478871021.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:21.312Z,1478871021.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:21.626Z,1478871021.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:22.033Z,1478871022.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:22.108Z,1478871022.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:22.450Z,1478871022.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:22.827Z,1478871022.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:22.904Z,1478871022.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:23.237Z,1478871023.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:23.316Z,1478871023.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:23.637Z,1478871023.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:24.036Z,1478871024.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:24.112Z,1478871024.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:24.442Z,1478871024.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:24.836Z,1478871024.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:24.909Z,1478871024.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:25.262Z,1478871025.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:25.344Z,1478871025.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:25.635Z,1478871025.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:26.047Z,1478871026.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:26.140Z,1478871026.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:26.474Z,1478871026.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:26.841Z,1478871026.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:26.936Z,1478871026.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:27.273Z,1478871027.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:27.344Z,1478871027.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:27.665Z,1478871027.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:28.054Z,1478871028.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:28.140Z,1478871028.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:28.453Z,1478871028.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:28.827Z,1478871028.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:28.937Z,1478871028.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:29.259Z,1478871029.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:29.404Z,1478871029.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:29.653Z,1478871029.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:30.037Z,1478871030.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:30.201Z,1478871030.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:30.442Z,1478871030.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:30.996Z,1478871030.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:31.756Z,1478871031.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:32.552Z,1478871032.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:33.348Z,1478871033.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:33.776Z,1478871033.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:33.946Z,1478871033.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:34.070Z,1478871034.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:34.481Z,1478871034.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:34.572Z,1478871034.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:34.909Z,1478871034.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:35.255Z,1478871035.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:35.296Z,1478871035.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:35.669Z,1478871035.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:36.056Z,1478871036.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:36.092Z,1478871036.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:36.460Z,1478871036.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:36.889Z,1478871036.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:36.919Z,1478871036.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:37.253Z,1478871037.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:37.300Z,1478871037.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:37.656Z,1478871037.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:38.096Z,1478871038.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:38.113Z,1478871038.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:38.463Z,1478871038.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:38.893Z,1478871038.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:38.921Z,1478871038.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:39.285Z,1478871039.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:39.304Z,1478871039.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:39.661Z,1478871039.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:40.089Z,1478871040.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:40.100Z,1478871040.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:40.461Z,1478871040.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:40.897Z,1478871040.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:40.946Z,1478871040.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:41.255Z,1478871041.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:41.308Z,1478871041.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:41.693Z,1478871041.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:42.057Z,1478871042.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:42.104Z,1478871042.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:42.455Z,1478871042.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:42.863Z,1478871042.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:42.900Z,1478871042.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:43.261Z,1478871043.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:43.376Z,1478871043.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:43.657Z,1478871043.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:44.066Z,1478871044.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:44.172Z,1478871044.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:44.461Z,1478871044.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:44.856Z,1478871044.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:44.968Z,1478871044.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:45.266Z,1478871045.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:45.669Z,1478871045.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:45.748Z,1478871045.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:46.058Z,1478871046.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:46.461Z,1478871046.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:46.544Z,1478871046.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:46.868Z,1478871046.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:47.260Z,1478871047.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:47.340Z,1478871047.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:47.662Z,1478871047.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:47.752Z,1478871047.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:48.054Z,1478871048.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:48.455Z,1478871048.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:48.548Z,1478871048.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:48.895Z,1478871048.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:49.264Z,1478871049.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:49.312Z,1478871049.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:49.664Z,1478871049.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:50.064Z,1478871050.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:50.108Z,1478871050.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:50.463Z,1478871050.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:50.904Z,1478871050.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:50.916Z,1478871050.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:51.274Z,1478871051.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:51.312Z,1478871051.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:51.671Z,1478871051.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:52.048Z,1478871052.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:52.108Z,1478871052.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:52.453Z,1478871052.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:52.904Z,1478871052.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:52.954Z,1478871052.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:53.293Z,1478871053.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:53.312Z,1478871053.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:53.655Z,1478871053.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:54.061Z,1478871054.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:54.108Z,1478871054.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:54.500Z,1478871054.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:54.904Z,1478871054.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:54.926Z,1478871054.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:55.298Z,1478871055.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:55.312Z,1478871055.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:55.685Z,1478871055.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:56.065Z,1478871056.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:56.108Z,1478871056.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:56.456Z,1478871056.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:56.856Z,1478871056.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:56.904Z,1478871056.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:57.265Z,1478871057.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:57.360Z,1478871057.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:57.653Z,1478871057.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:58.054Z,1478871058.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:58.156Z,1478871058.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:58.461Z,1478871058.461 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:58.461Z,1478871058.461 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 154
2016-11-11T13:30:58.461Z,1478871058.461 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:30:58.468Z,1478871058.468 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:58.468Z,1478871058.468 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 154
2016-11-11T13:30:58.468Z,1478871058.468 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:30:58.470Z,1478871058.470 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:58.470Z,1478871058.470 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 154
2016-11-11T13:30:58.470Z,1478871058.470 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:30:58.522Z,1478871058.522 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:30:58.523Z,1478871058.523 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:30:58.523Z,1478871058.523 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:30:58.880Z,1478871058.880 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:30:58.881Z,1478871058.881 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 154
2016-11-11T13:30:58.881Z,1478871058.881 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:30:58.881Z,1478871058.881 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 154
2016-11-11T13:30:58.882Z,1478871058.882 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:30:58.882Z,1478871058.882 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 154
2016-11-11T13:30:58.952Z,1478871058.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:30:59.246Z,1478871059.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:30:59.257Z,1478871059.257 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:30:59.258Z,1478871059.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:30:59.268Z,1478871059.267 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:30:59.268Z,1478871059.268 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:30:59.268Z,1478871059.268 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:30:59.269Z,1478871059.269 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:30:59.269Z,1478871059.269 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:30:59.270Z,1478871059.270 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:30:59.654Z,1478871059.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:30:59.732Z,1478871059.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:00.054Z,1478871060.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:00.455Z,1478871060.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:00.528Z,1478871060.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:00.861Z,1478871060.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:01.255Z,1478871061.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:01.324Z,1478871061.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:01.648Z,1478871061.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:01.736Z,1478871061.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:02.053Z,1478871062.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:02.453Z,1478871062.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:02.532Z,1478871062.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:02.905Z,1478871062.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:03.255Z,1478871063.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:03.276Z,1478871063.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:03.656Z,1478871063.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:04.055Z,1478871064.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:04.072Z,1478871064.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:04.454Z,1478871064.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:04.868Z,1478871064.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:04.914Z,1478871064.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:05.253Z,1478871065.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:05.280Z,1478871065.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:05.653Z,1478871065.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:06.061Z,1478871066.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:06.076Z,1478871066.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:06.453Z,1478871066.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:06.872Z,1478871066.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:06.906Z,1478871066.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:07.300Z,1478871067.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:07.302Z,1478871067.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:07.654Z,1478871067.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:08.061Z,1478871068.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:08.096Z,1478871068.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:08.459Z,1478871068.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:08.884Z,1478871068.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:08.892Z,1478871068.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:09.257Z,1478871069.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:09.300Z,1478871069.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:09.658Z,1478871069.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:10.058Z,1478871070.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:10.096Z,1478871070.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:10.467Z,1478871070.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:10.841Z,1478871070.842 [BPC1](ERROR): Failed to receive battery data
2016-11-11T13:31:10.842Z,1478871070.842 [BPC1] Communications Fault, FailCount= 1
2016-11-11T13:31:10.842Z,1478871070.842 [BPC1](ERROR): Communications Fault
2016-11-11T13:31:10.877Z,1478871070.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:10.903Z,1478871070.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:10.976Z,1478871070.976 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T13:31:11.268Z,1478871071.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:11.352Z,1478871071.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:11.667Z,1478871071.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:12.067Z,1478871072.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:12.088Z,1478871072.088 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:31:12.088Z,1478871072.088 [BPC1] No Fault, FailCount= 1
2016-11-11T13:31:12.149Z,1478871072.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:12.517Z,1478871072.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:12.881Z,1478871072.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:12.944Z,1478871072.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:13.333Z,1478871073.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:13.655Z,1478871073.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:13.712Z,1478871073.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:14.061Z,1478871074.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:14.455Z,1478871074.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:14.508Z,1478871074.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:14.855Z,1478871074.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:15.305Z,1478871075.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:15.339Z,1478871075.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:15.665Z,1478871075.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:15.716Z,1478871075.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:16.064Z,1478871076.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:16.467Z,1478871076.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:16.512Z,1478871076.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:16.900Z,1478871076.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:17.228Z,1478871077.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:17.263Z,1478871077.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:17.653Z,1478871077.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:18.024Z,1478871078.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:18.053Z,1478871078.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:18.456Z,1478871078.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:18.828Z,1478871078.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:18.899Z,1478871078.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:19.240Z,1478871079.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:19.269Z,1478871079.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:19.658Z,1478871079.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:20.036Z,1478871080.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:20.065Z,1478871080.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:20.465Z,1478871080.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:20.834Z,1478871080.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:20.917Z,1478871080.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:21.269Z,1478871081.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:21.284Z,1478871081.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:21.669Z,1478871081.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:22.064Z,1478871082.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:22.080Z,1478871082.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:22.469Z,1478871082.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:22.876Z,1478871082.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:22.883Z,1478871082.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:23.265Z,1478871083.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:23.284Z,1478871083.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:23.677Z,1478871083.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:24.056Z,1478871084.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:24.080Z,1478871084.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:24.455Z,1478871084.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:24.877Z,1478871084.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:24.921Z,1478871084.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:25.261Z,1478871085.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:25.340Z,1478871085.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:25.681Z,1478871085.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:26.061Z,1478871086.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:26.136Z,1478871086.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:26.476Z,1478871086.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:26.873Z,1478871086.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:26.932Z,1478871086.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:27.333Z,1478871087.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:27.664Z,1478871087.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:27.688Z,1478871087.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:28.053Z,1478871088.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:28.453Z,1478871088.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:28.485Z,1478871088.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:28.855Z,1478871088.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:29.280Z,1478871089.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:29.342Z,1478871089.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:29.661Z,1478871089.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:29.692Z,1478871089.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:30.061Z,1478871090.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:30.456Z,1478871090.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:30.488Z,1478871090.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:31.204Z,1478871091.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:31.000Z,1478871092.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:32.797Z,1478871092.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:33.216Z,1478871093.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:34.012Z,1478871094.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:34.059Z,1478871094.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:34.193Z,1478871094.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:34.537Z,1478871094.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:34.809Z,1478871094.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:34.937Z,1478871094.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:35.220Z,1478871095.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:35.341Z,1478871095.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:35.737Z,1478871095.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:36.016Z,1478871096.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:36.137Z,1478871096.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:36.534Z,1478871096.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:36.813Z,1478871096.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:36.988Z,1478871096.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:37.224Z,1478871097.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:37.329Z,1478871097.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:37.725Z,1478871097.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:38.020Z,1478871098.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:38.129Z,1478871098.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:38.582Z,1478871098.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:38.816Z,1478871098.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:38.964Z,1478871098.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:39.329Z,1478871099.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:39.344Z,1478871099.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:39.754Z,1478871099.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:40.130Z,1478871100.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:40.148Z,1478871100.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:40.561Z,1478871100.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:40.953Z,1478871100.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:40.967Z,1478871100.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:41.345Z,1478871101.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:41.656Z,1478871101.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:41.736Z,1478871101.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:42.137Z,1478871102.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:42.452Z,1478871102.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:42.532Z,1478871102.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:42.937Z,1478871102.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:43.249Z,1478871103.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:43.348Z,1478871103.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:43.664Z,1478871103.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:43.734Z,1478871103.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:44.133Z,1478871104.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:44.460Z,1478871104.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:44.533Z,1478871104.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:44.938Z,1478871104.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:45.208Z,1478871105.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:45.339Z,1478871105.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:45.733Z,1478871105.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:46.004Z,1478871106.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:46.134Z,1478871106.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:46.537Z,1478871106.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:46.801Z,1478871106.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:46.940Z,1478871106.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:47.214Z,1478871107.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:47.341Z,1478871107.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:47.737Z,1478871107.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:48.008Z,1478871108.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:48.140Z,1478871108.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:48.538Z,1478871108.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:48.804Z,1478871108.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:48.949Z,1478871108.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:49.212Z,1478871109.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:49.330Z,1478871109.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:49.732Z,1478871109.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:50.008Z,1478871110.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:50.135Z,1478871110.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:50.530Z,1478871110.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:50.804Z,1478871110.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:50.937Z,1478871110.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:51.212Z,1478871111.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:51.350Z,1478871111.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:51.741Z,1478871111.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:52.008Z,1478871112.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:52.139Z,1478871112.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:52.533Z,1478871112.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:52.804Z,1478871112.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:52.982Z,1478871112.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:53.284Z,1478871113.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:53.337Z,1478871113.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:53.735Z,1478871113.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:54.080Z,1478871114.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:54.165Z,1478871114.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:54.532Z,1478871114.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:54.876Z,1478871114.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:54.977Z,1478871114.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:55.363Z,1478871115.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:55.632Z,1478871115.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:55.731Z,1478871115.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:56.138Z,1478871116.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:56.428Z,1478871116.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:56.534Z,1478871116.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:56.936Z,1478871116.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:57.225Z,1478871117.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:57.330Z,1478871117.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:57.636Z,1478871117.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:57.742Z,1478871117.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:58.135Z,1478871118.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:58.432Z,1478871118.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:58.537Z,1478871118.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:58.930Z,1478871118.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:59.156Z,1478871119.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:31:59.340Z,1478871119.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:59.741Z,1478871119.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:31:59.952Z,1478871119.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:00.141Z,1478871120.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:00.534Z,1478871120.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:00.749Z,1478871120.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:00.945Z,1478871120.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:01.160Z,1478871121.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:01.337Z,1478871121.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:01.738Z,1478871121.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:01.956Z,1478871121.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:02.139Z,1478871122.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:02.544Z,1478871122.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:02.758Z,1478871122.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:02.942Z,1478871122.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:03.192Z,1478871123.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:03.345Z,1478871123.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:03.740Z,1478871123.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:03.988Z,1478871123.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:04.138Z,1478871124.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:04.544Z,1478871124.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:04.784Z,1478871124.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:04.942Z,1478871124.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:05.192Z,1478871125.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:05.337Z,1478871125.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:05.769Z,1478871125.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:05.988Z,1478871125.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:06.140Z,1478871126.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:06.538Z,1478871126.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:06.784Z,1478871126.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:06.949Z,1478871126.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:07.248Z,1478871127.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:07.369Z,1478871127.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:07.727Z,1478871127.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:08.044Z,1478871128.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:08.133Z,1478871128.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:08.562Z,1478871128.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:08.840Z,1478871128.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:08.941Z,1478871128.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:09.377Z,1478871129.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:09.608Z,1478871129.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:09.754Z,1478871129.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:10.134Z,1478871130.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:10.404Z,1478871130.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:10.540Z,1478871130.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:10.938Z,1478871130.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:11.201Z,1478871131.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:11.333Z,1478871131.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:11.612Z,1478871131.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:11.743Z,1478871131.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:12.137Z,1478871132.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:12.408Z,1478871132.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:12.536Z,1478871132.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:12.949Z,1478871132.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:13.140Z,1478871133.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:13.351Z,1478871133.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:13.724Z,1478871133.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:13.936Z,1478871133.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:14.129Z,1478871134.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:14.523Z,1478871134.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:14.733Z,1478871134.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:14.929Z,1478871134.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:15.148Z,1478871135.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:15.333Z,1478871135.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:15.727Z,1478871135.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:15.945Z,1478871135.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:16.127Z,1478871136.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:16.534Z,1478871136.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:16.741Z,1478871136.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:16.936Z,1478871136.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:17.152Z,1478871137.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:17.331Z,1478871137.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:17.741Z,1478871137.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:17.948Z,1478871137.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:18.131Z,1478871138.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:18.531Z,1478871138.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:18.748Z,1478871138.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:18.939Z,1478871138.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:19.156Z,1478871139.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:19.336Z,1478871139.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:19.732Z,1478871139.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:19.952Z,1478871139.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:20.137Z,1478871140.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:20.557Z,1478871140.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:20.748Z,1478871140.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:20.929Z,1478871140.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:21.224Z,1478871141.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:21.405Z,1478871141.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:21.755Z,1478871141.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:22.020Z,1478871142.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:22.169Z,1478871142.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:22.561Z,1478871142.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:22.816Z,1478871142.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:22.970Z,1478871142.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:23.386Z,1478871143.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:23.580Z,1478871143.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:23.743Z,1478871143.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:24.143Z,1478871144.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:24.376Z,1478871144.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:24.563Z,1478871144.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:24.935Z,1478871144.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:25.173Z,1478871145.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:25.343Z,1478871145.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:25.584Z,1478871145.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:25.754Z,1478871145.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:26.138Z,1478871146.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:26.380Z,1478871146.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:26.546Z,1478871146.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:26.950Z,1478871146.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:27.116Z,1478871147.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:27.339Z,1478871147.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:27.757Z,1478871147.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:27.912Z,1478871147.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:28.126Z,1478871148.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:28.558Z,1478871148.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:28.709Z,1478871148.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:28.934Z,1478871148.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:29.120Z,1478871149.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:29.334Z,1478871149.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:29.763Z,1478871149.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:29.772Z,1478871149.772 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T13:32:29.772Z,1478871149.772 [Default:CheckIn:C.Wait] Stopped
2016-11-11T13:32:29.772Z,1478871149.772 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T13:32:29.772Z,1478871149.772 [Default:CheckIn:D] Running Loop=1
2016-11-11T13:32:29.916Z,1478871149.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:30.129Z,1478871150.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:30.138Z,1478871150.138 [Default:CheckIn:D] Stopped
2016-11-11T13:32:30.138Z,1478871150.138 [Default:CheckIn:E] Running Loop=1
2016-11-11T13:32:30.536Z,1478871150.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:30.549Z,1478871150.549 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 522.480469 min 
2016-11-11T13:32:30.549Z,1478871150.549 [Default:CheckIn:E] Stopped
2016-11-11T13:32:30.549Z,1478871150.549 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T13:32:30.549Z,1478871150.549 [Default:CheckIn] Stopped
2016-11-11T13:32:30.549Z,1478871150.549 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T13:32:30.550Z,1478871150.550 [Default:CheckIn](INFO): Running loop #51
2016-11-11T13:32:30.550Z,1478871150.550 [Default:CheckIn] Running Loop=51
2016-11-11T13:32:30.550Z,1478871150.550 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T13:32:30.550Z,1478871150.550 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T13:32:30.713Z,1478871150.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:31.124Z,1478871151.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:31.920Z,1478871151.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:32.717Z,1478871152.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:33.128Z,1478871153.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:33.924Z,1478871153.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:34.678Z,1478871154.678 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T13:32:34.678Z,1478871154.678 [BPC1] Data Fault, FailCount= 1
2016-11-11T13:32:34.679Z,1478871154.679 [BPC1](ERROR): Data Fault
2016-11-11T13:32:34.720Z,1478871154.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:34.738Z,1478871154.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:34.855Z,1478871154.855 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T13:32:34.899Z,1478871154.898 [NAL9602](INFO): Powering up
2016-11-11T13:32:35.007Z,1478871155.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:35.200Z,1478871155.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:35.337Z,1478871155.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:35.723Z,1478871155.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:35.809Z,1478871155.809 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:32:35.809Z,1478871155.809 [BPC1] No Fault, FailCount= 1
2016-11-11T13:32:35.996Z,1478871155.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:36.205Z,1478871156.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:36.562Z,1478871156.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:36.792Z,1478871156.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:36.931Z,1478871156.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:37.314Z,1478871157.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:37.556Z,1478871157.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:37.753Z,1478871157.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:38.154Z,1478871158.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:38.353Z,1478871158.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:38.538Z,1478871158.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:38.945Z,1478871158.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:39.150Z,1478871159.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:39.365Z,1478871159.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:39.564Z,1478871159.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:39.764Z,1478871159.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:40.133Z,1478871160.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:40.360Z,1478871160.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:40.554Z,1478871160.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:40.931Z,1478871160.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:41.092Z,1478871161.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:41.354Z,1478871161.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:41.743Z,1478871161.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:41.888Z,1478871161.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:42.126Z,1478871162.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:42.537Z,1478871162.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:42.685Z,1478871162.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:42.933Z,1478871162.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:43.096Z,1478871163.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:43.343Z,1478871163.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:43.746Z,1478871163.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:43.893Z,1478871163.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:44.132Z,1478871164.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:44.545Z,1478871164.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:44.689Z,1478871164.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:44.957Z,1478871164.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:45.101Z,1478871165.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:45.334Z,1478871165.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:45.738Z,1478871165.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:45.896Z,1478871165.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:46.081Z,1478871166.081 [NAL9602](INFO): NAL9602 initialized
2016-11-11T13:32:46.139Z,1478871166.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:46.546Z,1478871166.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:46.693Z,1478871166.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:46.881Z,1478871166.881 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T13:32:46.881Z,1478871166.881 [NAL9602] Data Fault, FailCount= 5
2016-11-11T13:32:46.881Z,1478871166.881 [NAL9602](ERROR): Data Fault
2016-11-11T13:32:46.950Z,1478871166.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:47.021Z,1478871167.021 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T13:32:47.021Z,1478871167.021 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-11-11T13:32:47.156Z,1478871167.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:47.280Z,1478871167.280 [NAL9602](INFO): Powering down
2016-11-11T13:32:47.346Z,1478871167.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:47.762Z,1478871167.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:47.952Z,1478871167.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:48.126Z,1478871168.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:48.579Z,1478871168.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:48.751Z,1478871168.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:48.933Z,1478871168.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:49.180Z,1478871169.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:49.349Z,1478871169.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:49.738Z,1478871169.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:49.976Z,1478871169.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:50.155Z,1478871170.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:50.570Z,1478871170.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:50.772Z,1478871170.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:50.929Z,1478871170.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:51.330Z,1478871171.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:51.536Z,1478871171.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:51.729Z,1478871171.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:52.121Z,1478871172.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:52.332Z,1478871172.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:52.528Z,1478871172.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:52.930Z,1478871172.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:53.144Z,1478871173.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:53.324Z,1478871173.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:53.572Z,1478871173.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:53.729Z,1478871173.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:54.128Z,1478871174.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:54.368Z,1478871174.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:54.528Z,1478871174.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:54.925Z,1478871174.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:55.060Z,1478871175.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:55.322Z,1478871175.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:55.741Z,1478871175.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:55.856Z,1478871175.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:56.127Z,1478871176.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:56.531Z,1478871176.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:56.653Z,1478871176.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:56.938Z,1478871176.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:57.064Z,1478871177.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:57.331Z,1478871177.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:57.737Z,1478871177.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:57.860Z,1478871177.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:58.131Z,1478871178.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:58.532Z,1478871178.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:58.668Z,1478871178.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:58.928Z,1478871178.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:59.084Z,1478871179.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:32:59.337Z,1478871179.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:59.729Z,1478871179.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:32:59.880Z,1478871179.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:00.116Z,1478871180.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:00.516Z,1478871180.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:00.678Z,1478871180.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:00.917Z,1478871180.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:01.088Z,1478871181.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:01.321Z,1478871181.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:01.717Z,1478871181.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:01.884Z,1478871181.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:02.117Z,1478871182.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:02.563Z,1478871182.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:02.680Z,1478871182.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:02.915Z,1478871182.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:03.316Z,1478871183.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:03.476Z,1478871183.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:03.749Z,1478871183.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:04.121Z,1478871184.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:04.272Z,1478871184.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:04.539Z,1478871184.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:04.945Z,1478871184.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:05.068Z,1478871185.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:05.315Z,1478871185.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:05.712Z,1478871185.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:05.864Z,1478871185.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:06.121Z,1478871186.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:06.512Z,1478871186.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:06.660Z,1478871186.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:06.915Z,1478871186.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:07.385Z,1478871187.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:07.456Z,1478871187.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:07.734Z,1478871187.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:08.108Z,1478871188.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:08.252Z,1478871188.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:08.517Z,1478871188.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:08.915Z,1478871188.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:09.048Z,1478871189.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:09.317Z,1478871189.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:09.724Z,1478871189.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:09.844Z,1478871189.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:10.111Z,1478871190.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:10.515Z,1478871190.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:10.640Z,1478871190.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:10.937Z,1478871190.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:11.315Z,1478871191.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:11.436Z,1478871191.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:11.708Z,1478871191.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:12.117Z,1478871192.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:12.232Z,1478871192.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:12.534Z,1478871192.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:12.915Z,1478871192.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:13.028Z,1478871193.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:13.321Z,1478871193.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:13.715Z,1478871193.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:13.824Z,1478871193.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:14.116Z,1478871194.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:14.513Z,1478871194.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:14.620Z,1478871194.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:14.915Z,1478871194.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:15.316Z,1478871195.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:15.416Z,1478871195.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:15.723Z,1478871195.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:16.112Z,1478871196.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:16.212Z,1478871196.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:16.533Z,1478871196.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:17.008Z,1478871197.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:17.061Z,1478871197.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:17.357Z,1478871197.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:17.710Z,1478871197.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:17.804Z,1478871197.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:18.130Z,1478871198.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:18.541Z,1478871198.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:18.600Z,1478871198.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:18.917Z,1478871198.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:19.349Z,1478871199.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:19.396Z,1478871199.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:19.757Z,1478871199.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:20.115Z,1478871200.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:20.192Z,1478871200.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:20.524Z,1478871200.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:20.916Z,1478871200.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:20.988Z,1478871200.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:21.316Z,1478871201.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:21.713Z,1478871201.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:21.784Z,1478871201.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:22.121Z,1478871202.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:22.516Z,1478871202.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:22.580Z,1478871202.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:22.910Z,1478871202.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:23.339Z,1478871203.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:23.376Z,1478871203.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:23.741Z,1478871203.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:23.784Z,1478871203.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:24.149Z,1478871204.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:24.192Z,1478871204.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:24.526Z,1478871204.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:24.601Z,1478871204.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:24.918Z,1478871204.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:25.012Z,1478871205.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:25.329Z,1478871205.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:25.420Z,1478871205.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:25.727Z,1478871205.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:25.828Z,1478871205.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:26.121Z,1478871206.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:26.236Z,1478871206.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:26.524Z,1478871206.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:26.644Z,1478871206.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:26.929Z,1478871206.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:27.052Z,1478871207.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:27.321Z,1478871207.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:27.460Z,1478871207.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:27.727Z,1478871207.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:27.868Z,1478871207.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:28.120Z,1478871208.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:28.276Z,1478871208.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:28.527Z,1478871208.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:28.684Z,1478871208.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:28.919Z,1478871208.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:29.333Z,1478871209.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:29.480Z,1478871209.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:29.738Z,1478871209.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:29.888Z,1478871209.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:30.132Z,1478871210.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:30.527Z,1478871210.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:30.690Z,1478871210.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:30.930Z,1478871210.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:31.124Z,1478871211.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:31.920Z,1478871211.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:32.716Z,1478871212.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:33.480Z,1478871213.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:34.276Z,1478871214.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:34.409Z,1478871214.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:34.537Z,1478871214.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:34.920Z,1478871214.920 [PNI_TCM](ERROR): CRC does not match. Expected:0x1661 got:0x4438
2016-11-11T13:33:34.946Z,1478871214.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:35.073Z,1478871215.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:35.317Z,1478871215.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:35.484Z,1478871215.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:35.741Z,1478871215.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:36.107Z,1478871216.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:36.282Z,1478871216.282 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:36.535Z,1478871216.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:36.930Z,1478871216.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:37.012Z,1478871217.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:37.316Z,1478871217.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:37.704Z,1478871217.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:37.808Z,1478871217.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:38.118Z,1478871218.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:38.495Z,1478871218.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:38.605Z,1478871218.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:38.915Z,1478871218.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:39.016Z,1478871219.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:39.306Z,1478871219.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:39.712Z,1478871219.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:39.812Z,1478871219.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:40.103Z,1478871220.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:40.512Z,1478871220.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:40.609Z,1478871220.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:40.921Z,1478871220.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:41.020Z,1478871221.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:41.307Z,1478871221.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:41.693Z,1478871221.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:41.816Z,1478871221.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:42.113Z,1478871222.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:42.499Z,1478871222.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:42.612Z,1478871222.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:42.913Z,1478871222.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:43.020Z,1478871223.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:43.303Z,1478871223.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:43.710Z,1478871223.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:43.816Z,1478871223.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:44.106Z,1478871224.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:44.510Z,1478871224.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:44.612Z,1478871224.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:44.910Z,1478871224.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:45.112Z,1478871225.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:45.309Z,1478871225.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:45.709Z,1478871225.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:45.908Z,1478871225.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:46.127Z,1478871226.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:46.514Z,1478871226.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:46.704Z,1478871226.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:46.909Z,1478871226.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:47.320Z,1478871227.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:47.444Z,1478871227.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:47.719Z,1478871227.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:48.113Z,1478871228.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:48.240Z,1478871228.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:48.518Z,1478871228.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:48.972Z,1478871228.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:49.036Z,1478871229.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:49.307Z,1478871229.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:49.456Z,1478871229.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:49.749Z,1478871229.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:50.145Z,1478871230.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:50.253Z,1478871230.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:50.565Z,1478871230.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:50.897Z,1478871230.897 [PNI_TCM](ERROR): CRC does not match. Expected:0x2208 got:0x23559
2016-11-11T13:33:50.957Z,1478871230.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:50.992Z,1478871230.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:51.328Z,1478871231.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:51.745Z,1478871231.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:51.788Z,1478871231.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:52.109Z,1478871232.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:52.510Z,1478871232.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:52.585Z,1478871232.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:52.920Z,1478871232.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:52.996Z,1478871232.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:53.317Z,1478871233.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:53.688Z,1478871233.688 [PNI_TCM](ERROR): CRC does not match. Expected:0x27803 got:0x65129
2016-11-11T13:33:53.725Z,1478871233.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:53.792Z,1478871233.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:54.094Z,1478871234.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:54.501Z,1478871234.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:54.589Z,1478871234.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:54.931Z,1478871234.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:54.000Z,1478871235.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:55.309Z,1478871235.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:55.706Z,1478871235.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:55.796Z,1478871235.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:56.107Z,1478871236.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:56.514Z,1478871236.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:56.592Z,1478871236.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:56.913Z,1478871236.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:56.000Z,1478871237.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:57.302Z,1478871237.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:57.703Z,1478871237.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:57.796Z,1478871237.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:58.104Z,1478871238.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:58.509Z,1478871238.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:58.592Z,1478871238.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:58.909Z,1478871238.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:59.311Z,1478871239.311 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:59.311Z,1478871239.311 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 155
2016-11-11T13:33:59.311Z,1478871239.311 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:33:59.318Z,1478871239.318 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:59.318Z,1478871239.318 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 155
2016-11-11T13:33:59.318Z,1478871239.318 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:33:59.320Z,1478871239.320 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:33:59.320Z,1478871239.320 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 155
2016-11-11T13:33:59.320Z,1478871239.320 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:33:59.359Z,1478871239.359 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:33:59.360Z,1478871239.360 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:33:59.360Z,1478871239.360 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:33:59.388Z,1478871239.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:33:59.741Z,1478871239.741 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:33:59.741Z,1478871239.741 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 155
2016-11-11T13:33:59.742Z,1478871239.742 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:33:59.742Z,1478871239.742 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 155
2016-11-11T13:33:59.742Z,1478871239.742 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:33:59.743Z,1478871239.743 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 155
2016-11-11T13:34:00.086Z,1478871240.086 [PNI_TCM](ERROR): CRC does not match. Expected:0x65436 got:0x1857
2016-11-11T13:34:00.123Z,1478871240.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:34:00.123Z,1478871240.124 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:34:00.124Z,1478871240.124 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:34:00.139Z,1478871240.139 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:34:00.140Z,1478871240.140 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:34:00.140Z,1478871240.140 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:34:00.140Z,1478871240.141 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:34:00.141Z,1478871240.141 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:34:00.141Z,1478871240.141 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:34:00.184Z,1478871240.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:00.501Z,1478871240.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:00.900Z,1478871240.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:00.980Z,1478871240.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:01.303Z,1478871241.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:01.440Z,1478871241.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:01.702Z,1478871241.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:02.110Z,1478871242.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:02.236Z,1478871242.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:02.515Z,1478871242.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:03.033Z,1478871243.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:03.058Z,1478871243.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:03.320Z,1478871243.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:03.444Z,1478871243.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:03.714Z,1478871243.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:04.131Z,1478871244.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:04.240Z,1478871244.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:04.552Z,1478871244.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:04.918Z,1478871244.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:04.972Z,1478871244.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:05.325Z,1478871245.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:05.698Z,1478871245.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:05.768Z,1478871245.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:06.105Z,1478871246.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:06.498Z,1478871246.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:06.565Z,1478871246.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:06.909Z,1478871246.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:07.056Z,1478871247.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:07.309Z,1478871247.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:07.702Z,1478871247.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:07.852Z,1478871247.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:08.108Z,1478871248.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:08.585Z,1478871248.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:08.648Z,1478871248.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:08.900Z,1478871248.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:09.056Z,1478871249.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:09.299Z,1478871249.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:09.701Z,1478871249.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:09.852Z,1478871249.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:10.098Z,1478871250.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:10.572Z,1478871250.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:10.648Z,1478871250.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:10.909Z,1478871250.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:11.056Z,1478871251.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:11.302Z,1478871251.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:11.706Z,1478871251.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:11.852Z,1478871251.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:12.109Z,1478871252.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:12.504Z,1478871252.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:12.649Z,1478871252.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:12.900Z,1478871252.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:13.060Z,1478871253.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:13.312Z,1478871253.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:13.704Z,1478871253.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:13.856Z,1478871253.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:14.108Z,1478871254.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:14.505Z,1478871254.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:14.652Z,1478871254.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:14.899Z,1478871254.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:15.319Z,1478871255.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:15.412Z,1478871255.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:15.719Z,1478871255.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:16.117Z,1478871256.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:16.208Z,1478871256.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:16.497Z,1478871256.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:16.895Z,1478871256.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:17.004Z,1478871257.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:17.341Z,1478871257.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:17.416Z,1478871257.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:17.729Z,1478871257.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:18.109Z,1478871258.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:18.212Z,1478871258.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:18.572Z,1478871258.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:18.895Z,1478871258.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:18.940Z,1478871258.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:19.326Z,1478871259.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:19.729Z,1478871259.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:19.736Z,1478871259.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:20.102Z,1478871260.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:20.537Z,1478871260.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:20.562Z,1478871260.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:20.902Z,1478871260.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:20.952Z,1478871260.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:21.313Z,1478871261.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:21.711Z,1478871261.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:21.748Z,1478871261.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:22.108Z,1478871262.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:22.544Z,1478871262.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:22.574Z,1478871262.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:22.898Z,1478871262.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:22.956Z,1478871262.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:23.300Z,1478871263.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:23.710Z,1478871263.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:23.752Z,1478871263.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:24.109Z,1478871264.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:24.548Z,1478871264.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:24.573Z,1478871264.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:24.902Z,1478871264.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:24.956Z,1478871264.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:25.305Z,1478871265.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:25.702Z,1478871265.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:25.752Z,1478871265.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:26.109Z,1478871266.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:26.509Z,1478871266.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:26.548Z,1478871266.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:26.906Z,1478871266.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:27.020Z,1478871267.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:27.304Z,1478871267.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:27.709Z,1478871267.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:27.816Z,1478871267.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:28.100Z,1478871268.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:28.500Z,1478871268.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:28.612Z,1478871268.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:28.909Z,1478871268.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:29.300Z,1478871269.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:29.396Z,1478871269.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:29.707Z,1478871269.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:30.109Z,1478871270.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:30.192Z,1478871270.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:30.517Z,1478871270.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:30.913Z,1478871270.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:30.988Z,1478871270.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:31.300Z,1478871271.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:31.400Z,1478871271.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:32.196Z,1478871272.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:32.913Z,1478871272.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:33.708Z,1478871273.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:34.505Z,1478871274.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:34.789Z,1478871274.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:34.920Z,1478871274.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:34.921Z,1478871274.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:35.300Z,1478871275.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:35.713Z,1478871275.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:35.716Z,1478871275.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:36.099Z,1478871276.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:36.512Z,1478871276.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:36.598Z,1478871276.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:36.901Z,1478871276.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:36.924Z,1478871276.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:37.319Z,1478871277.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:37.685Z,1478871277.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:37.720Z,1478871277.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:38.089Z,1478871278.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:38.516Z,1478871278.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:38.521Z,1478871278.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:38.888Z,1478871278.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:39.287Z,1478871279.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:39.312Z,1478871279.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:39.691Z,1478871279.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:39.720Z,1478871279.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:40.086Z,1478871280.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:40.497Z,1478871280.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:40.516Z,1478871280.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:40.886Z,1478871280.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:41.004Z,1478871281.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:41.285Z,1478871281.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:41.686Z,1478871281.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:41.800Z,1478871281.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:42.093Z,1478871282.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:42.486Z,1478871282.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:42.596Z,1478871282.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:42.910Z,1478871282.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:43.295Z,1478871283.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:43.384Z,1478871283.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:43.692Z,1478871283.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:44.092Z,1478871284.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:44.180Z,1478871284.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:44.501Z,1478871284.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:44.885Z,1478871284.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:44.977Z,1478871284.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:45.286Z,1478871285.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:45.388Z,1478871285.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:45.688Z,1478871285.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:46.097Z,1478871286.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:46.184Z,1478871286.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:46.560Z,1478871286.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:46.885Z,1478871286.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:46.920Z,1478871286.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:46.933Z,1478871286.933 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T13:34:46.933Z,1478871286.934 [NAL9602] No Fault, FailCount= 5
2016-11-11T13:34:47.256Z,1478871287.256 [NAL9602](INFO): Powering up NAL9602
2016-11-11T13:34:47.293Z,1478871287.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:47.691Z,1478871287.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:47.716Z,1478871287.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:48.093Z,1478871288.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:48.512Z,1478871288.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:48.565Z,1478871288.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:48.886Z,1478871288.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:48.920Z,1478871288.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:49.306Z,1478871289.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:49.688Z,1478871289.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:49.716Z,1478871289.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:50.122Z,1478871290.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:50.512Z,1478871290.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:50.557Z,1478871290.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:50.920Z,1478871290.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:50.935Z,1478871290.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:51.335Z,1478871291.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:51.697Z,1478871291.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:51.724Z,1478871291.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:52.098Z,1478871292.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:52.520Z,1478871292.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:52.560Z,1478871292.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:52.900Z,1478871292.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:52.928Z,1478871292.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:53.293Z,1478871293.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:53.687Z,1478871293.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:53.724Z,1478871293.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:54.093Z,1478871294.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:54.498Z,1478871294.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:54.520Z,1478871294.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:54.900Z,1478871294.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:54.988Z,1478871294.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:55.299Z,1478871295.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:55.700Z,1478871295.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:55.784Z,1478871295.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:56.080Z,1478871296.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:56.485Z,1478871296.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:56.580Z,1478871296.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:56.898Z,1478871296.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:57.300Z,1478871297.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:57.372Z,1478871297.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:57.707Z,1478871297.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:58.109Z,1478871298.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:58.168Z,1478871298.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:58.449Z,1478871298.448 [NAL9602](INFO): NAL9602 initialized
2016-11-11T13:34:58.492Z,1478871298.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:58.964Z,1478871298.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:58.984Z,1478871298.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:59.309Z,1478871299.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:34:59.376Z,1478871299.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:34:59.706Z,1478871299.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:00.118Z,1478871300.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:00.172Z,1478871300.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:00.519Z,1478871300.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:00.890Z,1478871300.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:00.908Z,1478871300.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:01.310Z,1478871301.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:01.704Z,1478871301.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:01.709Z,1478871301.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:02.125Z,1478871302.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:02.500Z,1478871302.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:02.528Z,1478871302.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:02.913Z,1478871302.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:02.920Z,1478871302.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:03.285Z,1478871303.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:03.716Z,1478871303.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:03.725Z,1478871303.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:04.093Z,1478871304.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:04.512Z,1478871304.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:04.541Z,1478871304.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:04.920Z,1478871304.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:04.926Z,1478871304.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:05.297Z,1478871305.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:05.687Z,1478871305.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:05.716Z,1478871305.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:06.099Z,1478871306.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:06.512Z,1478871306.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:06.528Z,1478871306.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:06.904Z,1478871306.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:06.920Z,1478871306.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:07.308Z,1478871307.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:07.705Z,1478871307.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:07.716Z,1478871307.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:08.080Z,1478871308.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:08.485Z,1478871308.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:08.512Z,1478871308.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:08.897Z,1478871308.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:08.988Z,1478871308.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:09.287Z,1478871309.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:09.690Z,1478871309.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:09.784Z,1478871309.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:10.090Z,1478871310.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:10.489Z,1478871310.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:10.580Z,1478871310.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:10.980Z,1478871310.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:11.295Z,1478871311.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:11.352Z,1478871311.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:11.697Z,1478871311.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:12.102Z,1478871312.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:12.148Z,1478871312.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:12.508Z,1478871312.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:12.944Z,1478871312.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:12.970Z,1478871312.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:13.304Z,1478871313.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:13.352Z,1478871313.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:13.697Z,1478871313.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:14.094Z,1478871314.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:14.148Z,1478871314.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:14.570Z,1478871314.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:14.870Z,1478871314.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:14.888Z,1478871314.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:15.286Z,1478871315.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:15.664Z,1478871315.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:15.702Z,1478871315.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:16.137Z,1478871316.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:16.461Z,1478871316.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:16.548Z,1478871316.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:16.896Z,1478871316.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:16.916Z,1478871316.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:17.353Z,1478871317.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:17.692Z,1478871317.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:17.711Z,1478871317.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:18.117Z,1478871318.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:18.488Z,1478871318.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:18.540Z,1478871318.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:18.896Z,1478871318.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:18.916Z,1478871318.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:19.311Z,1478871319.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:19.682Z,1478871319.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:19.692Z,1478871319.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:20.082Z,1478871320.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:20.488Z,1478871320.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:20.519Z,1478871320.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:20.896Z,1478871320.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:20.901Z,1478871320.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:21.289Z,1478871321.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:21.693Z,1478871321.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:21.705Z,1478871321.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:22.109Z,1478871322.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:22.488Z,1478871322.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:22.564Z,1478871322.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:22.910Z,1478871322.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:22.964Z,1478871322.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:23.286Z,1478871323.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:23.684Z,1478871323.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:23.760Z,1478871323.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:24.089Z,1478871324.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:24.484Z,1478871324.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:24.556Z,1478871324.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:24.961Z,1478871324.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:25.285Z,1478871325.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:25.300Z,1478871325.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:25.685Z,1478871325.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:26.093Z,1478871326.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:26.096Z,1478871326.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:26.504Z,1478871326.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:26.893Z,1478871326.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:26.962Z,1478871326.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:27.305Z,1478871327.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:27.356Z,1478871327.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:27.709Z,1478871327.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:28.110Z,1478871328.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:28.152Z,1478871328.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:28.507Z,1478871328.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:28.824Z,1478871328.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:28.901Z,1478871328.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:29.289Z,1478871329.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:29.620Z,1478871329.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:29.729Z,1478871329.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:30.090Z,1478871330.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:30.417Z,1478871330.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:30.503Z,1478871330.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:30.828Z,1478871330.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:30.921Z,1478871330.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:31.297Z,1478871331.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:31.624Z,1478871331.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:31.696Z,1478871331.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:32.423Z,1478871332.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:32.836Z,1478871332.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:33.632Z,1478871333.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:34.429Z,1478871334.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:34.840Z,1478871334.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:35.184Z,1478871335.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:35.336Z,1478871335.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:35.636Z,1478871335.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:35.697Z,1478871335.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:36.093Z,1478871336.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:36.433Z,1478871336.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:36.464Z,1478871336.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:36.865Z,1478871336.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:36.920Z,1478871336.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:37.257Z,1478871337.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:37.661Z,1478871337.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:37.716Z,1478871337.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:38.061Z,1478871338.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:38.457Z,1478871338.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:38.512Z,1478871338.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:38.913Z,1478871338.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:39.266Z,1478871339.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:39.308Z,1478871339.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:39.661Z,1478871339.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:39.716Z,1478871339.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:40.075Z,1478871340.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:40.472Z,1478871340.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:40.512Z,1478871340.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:40.922Z,1478871340.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:41.276Z,1478871341.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:41.308Z,1478871341.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:41.657Z,1478871341.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:42.060Z,1478871342.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:42.104Z,1478871342.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:42.498Z,1478871342.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:42.804Z,1478871342.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:42.868Z,1478871342.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:43.259Z,1478871343.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:43.600Z,1478871343.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:43.664Z,1478871343.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:44.058Z,1478871344.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:44.397Z,1478871344.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:44.465Z,1478871344.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:44.816Z,1478871344.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:44.864Z,1478871344.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:45.266Z,1478871345.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:45.612Z,1478871345.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:45.649Z,1478871345.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:46.073Z,1478871346.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:46.417Z,1478871346.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:46.493Z,1478871346.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:46.852Z,1478871346.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:46.897Z,1478871346.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:47.261Z,1478871347.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:47.648Z,1478871347.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:47.657Z,1478871347.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:48.069Z,1478871348.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:48.444Z,1478871348.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:48.513Z,1478871348.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:48.852Z,1478871348.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:48.876Z,1478871348.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:49.267Z,1478871349.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:49.648Z,1478871349.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:49.707Z,1478871349.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:50.076Z,1478871350.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:50.444Z,1478871350.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:50.507Z,1478871350.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:50.901Z,1478871350.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:50.920Z,1478871350.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:51.265Z,1478871351.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:51.670Z,1478871351.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:51.716Z,1478871351.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:52.061Z,1478871352.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:52.469Z,1478871352.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:52.512Z,1478871352.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:52.920Z,1478871352.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:53.252Z,1478871353.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:53.262Z,1478871353.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:53.656Z,1478871353.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:54.049Z,1478871354.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:54.069Z,1478871354.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:54.470Z,1478871354.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:54.845Z,1478871354.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:54.934Z,1478871354.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:55.274Z,1478871355.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:55.320Z,1478871355.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:55.653Z,1478871355.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:56.057Z,1478871356.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:56.116Z,1478871356.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:56.475Z,1478871356.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:56.784Z,1478871356.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:56.860Z,1478871356.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:57.268Z,1478871357.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:57.580Z,1478871357.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:57.659Z,1478871357.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:58.074Z,1478871358.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:58.377Z,1478871358.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:58.488Z,1478871358.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:58.788Z,1478871358.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:58.849Z,1478871358.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:59.253Z,1478871359.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:59.584Z,1478871359.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:35:59.657Z,1478871359.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:35:59.709Z,1478871359.709 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T13:36:00.056Z,1478871360.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:00.388Z,1478871360.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:00.482Z,1478871360.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:00.816Z,1478871360.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:00.855Z,1478871360.855 [BPC1](ERROR): Failed to parse message.
2016-11-11T13:36:00.855Z,1478871360.855 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T13:36:00.855Z,1478871360.855 [BPC1] Data Fault, FailCount= 1
2016-11-11T13:36:00.856Z,1478871360.856 [BPC1](ERROR): Data Fault
2016-11-11T13:36:00.872Z,1478871360.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:00.909Z,1478871360.909 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T13:36:01.273Z,1478871361.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:01.612Z,1478871361.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:01.674Z,1478871361.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:02.053Z,1478871362.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:02.102Z,1478871362.102 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:36:02.102Z,1478871362.102 [BPC1] No Fault, FailCount= 1
2016-11-11T13:36:02.418Z,1478871362.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:02.547Z,1478871362.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:02.828Z,1478871362.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:02.882Z,1478871362.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:03.293Z,1478871363.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:03.633Z,1478871363.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:03.662Z,1478871363.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:04.064Z,1478871364.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:04.428Z,1478871364.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:04.518Z,1478871364.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:04.864Z,1478871364.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:04.892Z,1478871364.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:05.268Z,1478871365.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:05.668Z,1478871365.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:05.688Z,1478871365.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:06.053Z,1478871366.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:06.456Z,1478871366.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:06.484Z,1478871366.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:06.901Z,1478871366.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:07.262Z,1478871367.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:07.280Z,1478871367.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:07.669Z,1478871367.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:07.688Z,1478871367.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:08.069Z,1478871368.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:08.470Z,1478871368.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:08.484Z,1478871368.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:08.907Z,1478871368.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:09.268Z,1478871369.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:09.276Z,1478871369.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:09.665Z,1478871369.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:10.065Z,1478871370.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:10.072Z,1478871370.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:10.468Z,1478871370.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:10.764Z,1478871370.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:10.865Z,1478871370.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:11.264Z,1478871371.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:11.560Z,1478871371.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:11.675Z,1478871371.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:12.071Z,1478871372.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:12.357Z,1478871372.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:12.473Z,1478871372.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:12.768Z,1478871372.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:12.871Z,1478871372.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:13.272Z,1478871373.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:13.564Z,1478871373.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:13.673Z,1478871373.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:14.093Z,1478871374.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:14.361Z,1478871374.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:14.484Z,1478871374.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:14.776Z,1478871374.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:14.861Z,1478871374.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:15.264Z,1478871375.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:15.572Z,1478871375.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:15.657Z,1478871375.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:16.067Z,1478871376.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:16.369Z,1478871376.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:16.465Z,1478871376.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:16.780Z,1478871376.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:16.867Z,1478871376.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:17.270Z,1478871377.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:17.576Z,1478871377.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:17.671Z,1478871377.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:18.072Z,1478871378.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:18.372Z,1478871378.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:18.511Z,1478871378.511 [BPC1](ERROR): Failed to receive battery data
2016-11-11T13:36:18.511Z,1478871378.511 [BPC1] Communications Fault, FailCount= 2
2016-11-11T13:36:18.511Z,1478871378.511 [BPC1](ERROR): Communications Fault
2016-11-11T13:36:18.538Z,1478871378.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:18.591Z,1478871378.591 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T13:36:18.863Z,1478871378.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:18.888Z,1478871378.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:19.257Z,1478871379.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:19.663Z,1478871379.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:19.684Z,1478871379.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:19.703Z,1478871379.703 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:36:19.704Z,1478871379.704 [BPC1] No Fault, FailCount= 2
2016-11-11T13:36:20.122Z,1478871380.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:20.480Z,1478871380.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:20.487Z,1478871380.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:20.888Z,1478871380.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:21.216Z,1478871381.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:21.268Z,1478871381.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:21.656Z,1478871381.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:22.012Z,1478871382.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:22.064Z,1478871382.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:22.477Z,1478871382.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:22.828Z,1478871382.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:22.900Z,1478871382.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:23.268Z,1478871383.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:23.274Z,1478871383.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:23.671Z,1478871383.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:24.064Z,1478871384.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:24.093Z,1478871384.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:24.469Z,1478871384.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:24.740Z,1478871384.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:24.873Z,1478871384.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:25.256Z,1478871385.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:25.536Z,1478871385.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:25.656Z,1478871385.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:26.058Z,1478871386.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:26.333Z,1478871386.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:26.469Z,1478871386.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:26.744Z,1478871386.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:26.856Z,1478871386.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:27.275Z,1478871387.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:27.540Z,1478871387.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:27.670Z,1478871387.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:28.064Z,1478871388.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:28.348Z,1478871388.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:28.475Z,1478871388.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:28.760Z,1478871388.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:28.883Z,1478871388.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:29.262Z,1478871389.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:29.556Z,1478871389.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:29.661Z,1478871389.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:30.050Z,1478871390.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:30.353Z,1478871390.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:30.473Z,1478871390.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:30.768Z,1478871390.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:30.861Z,1478871390.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:31.301Z,1478871391.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:31.564Z,1478871391.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:31.663Z,1478871391.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:32.061Z,1478871392.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:32.360Z,1478871392.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:32.856Z,1478871392.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:33.652Z,1478871393.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:34.448Z,1478871394.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:35.192Z,1478871395.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:35.581Z,1478871395.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:35.697Z,1478871395.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:35.988Z,1478871395.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:36.089Z,1478871396.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:36.493Z,1478871396.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:36.785Z,1478871396.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:36.952Z,1478871396.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:37.196Z,1478871397.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:37.305Z,1478871397.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:37.713Z,1478871397.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:37.992Z,1478871397.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:38.113Z,1478871398.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:38.505Z,1478871398.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:38.716Z,1478871398.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:38.901Z,1478871398.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:39.280Z,1478871399.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:39.512Z,1478871399.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:39.683Z,1478871399.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:40.083Z,1478871400.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:40.309Z,1478871400.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:40.493Z,1478871400.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:40.720Z,1478871400.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:40.888Z,1478871400.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:41.285Z,1478871401.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:41.517Z,1478871401.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:41.686Z,1478871401.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:42.094Z,1478871402.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:42.313Z,1478871402.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:42.495Z,1478871402.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:42.728Z,1478871402.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:42.892Z,1478871402.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:43.296Z,1478871403.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:43.525Z,1478871403.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:43.693Z,1478871403.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:44.092Z,1478871404.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:44.321Z,1478871404.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:44.494Z,1478871404.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:44.736Z,1478871404.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:44.897Z,1478871404.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:45.296Z,1478871405.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:45.532Z,1478871405.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:45.705Z,1478871405.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:46.109Z,1478871406.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:46.328Z,1478871406.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:46.509Z,1478871406.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:46.820Z,1478871406.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:46.892Z,1478871406.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:47.285Z,1478871407.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:47.616Z,1478871407.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:47.687Z,1478871407.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:48.083Z,1478871408.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:48.412Z,1478871408.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:48.501Z,1478871408.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:48.921Z,1478871408.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:49.168Z,1478871409.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:49.297Z,1478871409.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:49.680Z,1478871409.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:49.964Z,1478871409.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:50.089Z,1478871410.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:50.521Z,1478871410.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:50.761Z,1478871410.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:50.896Z,1478871410.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:51.172Z,1478871411.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:51.334Z,1478871411.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:51.690Z,1478871411.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:51.968Z,1478871411.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:52.109Z,1478871412.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:52.513Z,1478871412.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:52.696Z,1478871412.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:52.901Z,1478871412.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:53.277Z,1478871413.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:53.492Z,1478871413.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:53.681Z,1478871413.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:54.090Z,1478871414.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:54.289Z,1478871414.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:54.497Z,1478871414.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:54.700Z,1478871414.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:54.892Z,1478871414.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:55.289Z,1478871415.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:55.497Z,1478871415.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:55.684Z,1478871415.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:56.097Z,1478871416.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:56.293Z,1478871416.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:56.493Z,1478871416.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:56.704Z,1478871416.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:56.892Z,1478871416.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:57.296Z,1478871417.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:57.500Z,1478871417.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:57.700Z,1478871417.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:58.076Z,1478871418.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:58.297Z,1478871418.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:58.513Z,1478871418.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:58.708Z,1478871418.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:58.885Z,1478871418.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:59.284Z,1478871419.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:36:59.506Z,1478871419.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:36:59.692Z,1478871419.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:00.088Z,1478871420.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:00.300Z,1478871420.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:00.493Z,1478871420.493 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:00.494Z,1478871420.494 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 156
2016-11-11T13:37:00.494Z,1478871420.494 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:37:00.501Z,1478871420.500 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:00.501Z,1478871420.501 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 156
2016-11-11T13:37:00.501Z,1478871420.501 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:37:00.503Z,1478871420.503 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:00.503Z,1478871420.503 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 156
2016-11-11T13:37:00.503Z,1478871420.503 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:37:00.538Z,1478871420.538 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:37:00.538Z,1478871420.538 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:37:00.539Z,1478871420.539 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:37:00.780Z,1478871420.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:00.902Z,1478871420.902 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:37:00.902Z,1478871420.902 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 156
2016-11-11T13:37:00.904Z,1478871420.904 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:37:00.904Z,1478871420.904 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 156
2016-11-11T13:37:00.904Z,1478871420.904 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:37:00.904Z,1478871420.904 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 156
2016-11-11T13:37:01.300Z,1478871421.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:37:01.301Z,1478871421.301 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:37:01.301Z,1478871421.301 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:37:01.306Z,1478871421.306 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:37:01.306Z,1478871421.306 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:37:01.307Z,1478871421.307 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:37:01.307Z,1478871421.307 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:37:01.308Z,1478871421.308 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:37:01.308Z,1478871421.308 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:37:01.576Z,1478871421.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:01.676Z,1478871421.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:02.081Z,1478871422.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:02.372Z,1478871422.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:02.485Z,1478871422.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:02.891Z,1478871422.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:03.164Z,1478871423.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:03.343Z,1478871423.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:03.688Z,1478871423.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:03.960Z,1478871423.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:04.092Z,1478871424.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:04.492Z,1478871424.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:04.757Z,1478871424.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:04.909Z,1478871424.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:05.176Z,1478871425.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:05.293Z,1478871425.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:05.734Z,1478871425.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:05.972Z,1478871425.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:06.099Z,1478871426.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:06.517Z,1478871426.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:06.664Z,1478871426.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:06.889Z,1478871426.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:07.386Z,1478871427.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:07.460Z,1478871427.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:07.700Z,1478871427.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:08.101Z,1478871428.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:08.257Z,1478871428.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:08.504Z,1478871428.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:08.668Z,1478871428.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:08.896Z,1478871428.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:09.284Z,1478871429.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:09.464Z,1478871429.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:09.688Z,1478871429.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:10.086Z,1478871430.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:10.261Z,1478871430.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:10.493Z,1478871430.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:10.676Z,1478871430.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:10.892Z,1478871430.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:11.297Z,1478871431.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:11.474Z,1478871431.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:11.696Z,1478871431.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:12.097Z,1478871432.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:12.269Z,1478871432.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:12.521Z,1478871432.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:12.684Z,1478871432.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:12.897Z,1478871432.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:13.301Z,1478871433.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:13.481Z,1478871433.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:13.677Z,1478871433.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:14.081Z,1478871434.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:14.276Z,1478871434.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:14.513Z,1478871434.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:14.764Z,1478871434.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:14.884Z,1478871434.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:15.288Z,1478871435.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:15.560Z,1478871435.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:15.697Z,1478871435.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:16.093Z,1478871436.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:16.356Z,1478871436.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:16.488Z,1478871436.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:16.897Z,1478871436.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:17.116Z,1478871437.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:17.293Z,1478871437.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:17.692Z,1478871437.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:17.912Z,1478871437.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:18.093Z,1478871438.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:18.492Z,1478871438.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:18.709Z,1478871438.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:18.896Z,1478871438.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:19.120Z,1478871439.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:19.321Z,1478871439.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:19.685Z,1478871439.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:19.916Z,1478871439.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:20.121Z,1478871440.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:20.501Z,1478871440.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:20.656Z,1478871440.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:20.913Z,1478871440.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:21.309Z,1478871441.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:21.452Z,1478871441.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:21.689Z,1478871441.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:22.085Z,1478871442.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:22.252Z,1478871442.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:22.497Z,1478871442.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:22.668Z,1478871442.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:22.889Z,1478871442.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:23.291Z,1478871443.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:23.464Z,1478871443.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:23.687Z,1478871443.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:24.098Z,1478871444.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:24.261Z,1478871444.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:24.496Z,1478871444.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:24.680Z,1478871444.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:24.894Z,1478871444.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:25.331Z,1478871445.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:25.476Z,1478871445.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:25.694Z,1478871445.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:26.102Z,1478871446.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:26.272Z,1478871446.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:26.517Z,1478871446.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:26.680Z,1478871446.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:26.894Z,1478871446.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:27.295Z,1478871447.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:27.476Z,1478871447.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:27.701Z,1478871447.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:28.098Z,1478871448.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:28.272Z,1478871448.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:28.507Z,1478871448.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:28.740Z,1478871448.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:28.918Z,1478871448.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:29.318Z,1478871449.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:29.536Z,1478871449.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:29.702Z,1478871449.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:30.101Z,1478871450.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:30.332Z,1478871450.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:30.512Z,1478871450.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:30.889Z,1478871450.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:30.975Z,1478871450.975 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T13:32:30.6Z
2016-11-11T13:37:30.976Z,1478871450.976 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T13:37:30.976Z,1478871450.976 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T13:37:31.128Z,1478871451.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:31.301Z,1478871451.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:31.536Z,1478871451.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:32.332Z,1478871452.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:32.806Z,1478871452.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:32.992Z,1478871452.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:33.120Z,1478871453.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:33.916Z,1478871453.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:34.628Z,1478871454.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:35.424Z,1478871455.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:36.221Z,1478871456.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:36.653Z,1478871456.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:37.230Z,1478871457.230 [PNI_TCM](ERROR): CRC does not match. Expected:0x21391 got:0x49579
2016-11-11T13:37:37.230Z,1478871457.230 [PNI_TCM](ERROR): CRC does not match. Expected:0x64670 got:0x49579
2016-11-11T13:37:37.230Z,1478871457.230 [PNI_TCM](ERROR): CRC does not match. Expected:0x1184 got:0x49579
2016-11-11T13:37:37.231Z,1478871457.231 [PNI_TCM](ERROR): CRC does not match. Expected:0x64993 got:0x49579
2016-11-11T13:37:37.231Z,1478871457.231 [PNI_TCM](ERROR): CRC does not match. Expected:0x8603 got:0x49579
2016-11-11T13:37:37.232Z,1478871457.232 [PNI_TCM](ERROR): CRC does not match. Expected:0x27828 got:0x49579
2016-11-11T13:37:37.232Z,1478871457.232 [PNI_TCM](ERROR): CRC does not match. Expected:0x34666 got:0x49579
2016-11-11T13:37:37.233Z,1478871457.233 [PNI_TCM](ERROR): CRC does not match. Expected:0x60080 got:0x49579
2016-11-11T13:37:37.233Z,1478871457.233 [PNI_TCM](ERROR): CRC does not match. Expected:0x36661 got:0x49579
2016-11-11T13:37:37.233Z,1478871457.233 [PNI_TCM](ERROR): CRC does not match. Expected:0x41854 got:0x49579
2016-11-11T13:37:37.361Z,1478871457.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:37.413Z,1478871457.413 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20161111T044527/Courier0204.lzma
2016-11-11T13:37:37.448Z,1478871457.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:37.474Z,1478871457.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:37.897Z,1478871457.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:38.217Z,1478871458.217 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0204.lzma.bak
2016-11-11T13:37:38.217Z,1478871458.217 [DataOverHttps](INFO): SBD MOMSN=4555450
2016-11-11T13:37:38.244Z,1478871458.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:38.347Z,1478871458.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:38.652Z,1478871458.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:39.449Z,1478871459.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:40.244Z,1478871460.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:40.656Z,1478871460.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:40.974Z,1478871460.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:41.150Z,1478871461.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:41.452Z,1478871461.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:42.248Z,1478871462.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:42.724Z,1478871462.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:43.520Z,1478871463.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:44.316Z,1478871464.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:45.080Z,1478871465.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:45.876Z,1478871465.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:46.672Z,1478871466.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:47.084Z,1478871467.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:47.880Z,1478871467.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:48.620Z,1478871468.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:48.758Z,1478871468.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:48.921Z,1478871468.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:49.322Z,1478871469.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:49.416Z,1478871469.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:49.709Z,1478871469.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:50.086Z,1478871470.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:50.213Z,1478871470.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:50.516Z,1478871470.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:50.624Z,1478871470.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:51.420Z,1478871471.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:52.216Z,1478871472.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:52.624Z,1478871472.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:53.420Z,1478871473.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:54.216Z,1478871474.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:54.624Z,1478871474.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:55.420Z,1478871475.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:56.216Z,1478871476.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:56.720Z,1478871476.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:57.319Z,1478871477.319 [NAL9602](INFO): SBD MO Status=2, MOMSN=347, MT Status=2, MTMSN=0
2016-11-11T13:37:57.319Z,1478871477.319 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T13:37:57.403Z,1478871477.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:57.489Z,1478871477.489 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0205.lzma
2016-11-11T13:37:57.516Z,1478871477.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:57.578Z,1478871477.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:57.925Z,1478871477.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:58.274Z,1478871478.274 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0205.lzma.bak
2016-11-11T13:37:58.274Z,1478871478.274 [DataOverHttps](INFO): SBD MOMSN=4555453
2016-11-11T13:37:58.312Z,1478871478.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:58.364Z,1478871478.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:59.052Z,1478871479.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:59.848Z,1478871479.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:37:59.942Z,1478871479.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:37:59.951Z,1478871479.951 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T13:37:59.952Z,1478871479.952 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T13:37:59.952Z,1478871479.952 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T13:38:00.093Z,1478871480.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:00.645Z,1478871480.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:01.056Z,1478871481.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:01.852Z,1478871481.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:02.580Z,1478871482.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:03.376Z,1478871483.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:03.637Z,1478871483.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:03.750Z,1478871483.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:04.172Z,1478871484.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:04.207Z,1478871484.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:04.576Z,1478871484.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:04.592Z,1478871484.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:04.930Z,1478871484.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:05.378Z,1478871485.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:05.388Z,1478871485.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:05.757Z,1478871485.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:06.184Z,1478871486.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:06.198Z,1478871486.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:06.540Z,1478871486.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:06.596Z,1478871486.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:06.942Z,1478871486.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:07.340Z,1478871487.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:07.392Z,1478871487.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:07.739Z,1478871487.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:08.188Z,1478871488.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:08.221Z,1478871488.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:08.541Z,1478871488.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:08.596Z,1478871488.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:08.937Z,1478871488.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:09.333Z,1478871489.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:09.392Z,1478871489.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:09.729Z,1478871489.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:10.154Z,1478871490.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:10.188Z,1478871490.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:10.538Z,1478871490.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:10.664Z,1478871490.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:10.930Z,1478871490.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:11.337Z,1478871491.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:11.460Z,1478871491.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:11.749Z,1478871491.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:12.146Z,1478871492.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:12.256Z,1478871492.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:12.537Z,1478871492.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:12.920Z,1478871492.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:13.024Z,1478871493.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:13.333Z,1478871493.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:13.732Z,1478871493.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:13.820Z,1478871493.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:14.136Z,1478871494.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:14.529Z,1478871494.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:14.617Z,1478871494.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:14.933Z,1478871494.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:15.028Z,1478871495.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:15.342Z,1478871495.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:15.740Z,1478871495.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:15.824Z,1478871495.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:16.198Z,1478871496.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:16.528Z,1478871496.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:16.584Z,1478871496.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:16.937Z,1478871496.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:17.337Z,1478871497.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:17.380Z,1478871497.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:17.773Z,1478871497.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:18.176Z,1478871498.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:18.242Z,1478871498.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:18.548Z,1478871498.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:18.584Z,1478871498.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:18.938Z,1478871498.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:19.357Z,1478871499.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:19.388Z,1478871499.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:19.729Z,1478871499.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:20.184Z,1478871500.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:20.206Z,1478871500.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:20.535Z,1478871500.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:20.592Z,1478871500.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:20.967Z,1478871500.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:21.333Z,1478871501.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:21.388Z,1478871501.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:21.790Z,1478871501.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:22.176Z,1478871502.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:22.184Z,1478871502.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:22.536Z,1478871502.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:22.592Z,1478871502.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:22.929Z,1478871502.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:23.333Z,1478871503.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:23.388Z,1478871503.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:23.734Z,1478871503.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:24.136Z,1478871504.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:24.184Z,1478871504.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:24.537Z,1478871504.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:24.958Z,1478871504.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:24.980Z,1478871504.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:25.324Z,1478871505.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:25.733Z,1478871505.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:25.776Z,1478871505.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:26.141Z,1478871506.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:26.529Z,1478871506.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:26.572Z,1478871506.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:26.936Z,1478871506.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:27.342Z,1478871507.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:27.368Z,1478871507.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:27.740Z,1478871507.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:28.139Z,1478871508.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:28.164Z,1478871508.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:28.537Z,1478871508.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:28.960Z,1478871508.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:29.001Z,1478871509.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:29.335Z,1478871509.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:29.740Z,1478871509.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:29.756Z,1478871509.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:30.146Z,1478871510.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:30.537Z,1478871510.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:30.552Z,1478871510.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:30.941Z,1478871510.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:31.344Z,1478871511.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:31.348Z,1478871511.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:31.738Z,1478871511.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:32.145Z,1478871512.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:32.162Z,1478871512.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:32.568Z,1478871512.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:32.940Z,1478871512.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:32.982Z,1478871512.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:33.366Z,1478871513.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:33.736Z,1478871513.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:33.745Z,1478871513.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:34.152Z,1478871514.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:34.540Z,1478871514.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:34.567Z,1478871514.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:34.929Z,1478871514.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:35.336Z,1478871515.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:35.367Z,1478871515.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:35.763Z,1478871515.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:36.132Z,1478871516.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:36.164Z,1478871516.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:36.530Z,1478871516.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:36.928Z,1478871516.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:36.935Z,1478871516.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:37.337Z,1478871517.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:37.724Z,1478871517.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:37.730Z,1478871517.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:38.137Z,1478871518.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:38.520Z,1478871518.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:38.541Z,1478871518.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:38.940Z,1478871518.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:39.316Z,1478871519.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:39.346Z,1478871519.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:39.739Z,1478871519.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:40.112Z,1478871520.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:40.142Z,1478871520.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:40.568Z,1478871520.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:40.908Z,1478871520.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:40.958Z,1478871520.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:41.317Z,1478871521.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:41.338Z,1478871521.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:41.724Z,1478871521.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:41.736Z,1478871521.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:42.128Z,1478871522.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:42.132Z,1478871522.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:42.541Z,1478871522.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:42.609Z,1478871522.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:42.941Z,1478871522.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:42.952Z,1478871522.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:43.354Z,1478871523.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:43.360Z,1478871523.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:43.690Z,1478871523.690 [NAL9602](INFO): SBD MO Status=2, MOMSN=347, MT Status=2, MTMSN=0
2016-11-11T13:38:43.690Z,1478871523.690 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T13:38:43.749Z,1478871523.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:43.768Z,1478871523.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:44.176Z,1478871524.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:44.205Z,1478871524.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:44.533Z,1478871524.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:44.584Z,1478871524.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:44.927Z,1478871524.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:44.992Z,1478871524.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:45.329Z,1478871525.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:45.400Z,1478871525.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:45.738Z,1478871525.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:46.153Z,1478871526.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:46.196Z,1478871526.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:46.538Z,1478871526.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:46.604Z,1478871526.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:46.930Z,1478871526.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:47.331Z,1478871527.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:47.400Z,1478871527.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:47.753Z,1478871527.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:48.196Z,1478871528.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:48.205Z,1478871528.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:48.550Z,1478871528.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:48.604Z,1478871528.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:48.948Z,1478871528.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:49.363Z,1478871529.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:49.400Z,1478871529.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:49.729Z,1478871529.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:50.182Z,1478871530.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:50.196Z,1478871530.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:50.533Z,1478871530.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:50.604Z,1478871530.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:50.967Z,1478871530.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:51.323Z,1478871531.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:51.400Z,1478871531.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:51.730Z,1478871531.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:52.127Z,1478871532.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:52.196Z,1478871532.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:52.541Z,1478871532.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:52.608Z,1478871532.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:52.936Z,1478871532.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:53.342Z,1478871533.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:53.404Z,1478871533.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:53.749Z,1478871533.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:54.144Z,1478871534.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:54.200Z,1478871534.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:54.570Z,1478871534.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:54.933Z,1478871534.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:54.988Z,1478871534.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:55.345Z,1478871535.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:55.745Z,1478871535.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:55.784Z,1478871535.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:56.137Z,1478871536.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:56.580Z,1478871536.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:56.594Z,1478871536.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:56.925Z,1478871536.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:56.988Z,1478871536.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:57.329Z,1478871537.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:57.732Z,1478871537.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:57.784Z,1478871537.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:58.135Z,1478871538.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:58.480Z,1478871538.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:58.539Z,1478871538.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:58.929Z,1478871538.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:59.276Z,1478871539.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:38:59.333Z,1478871539.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:38:59.733Z,1478871539.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:00.073Z,1478871540.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:00.159Z,1478871540.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:00.492Z,1478871540.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:00.546Z,1478871540.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:01.288Z,1478871541.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:02.085Z,1478871542.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:02.496Z,1478871542.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:03.292Z,1478871543.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:04.088Z,1478871544.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:04.106Z,1478871544.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:04.289Z,1478871544.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:04.504Z,1478871544.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:04.663Z,1478871544.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:05.093Z,1478871545.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:05.300Z,1478871545.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:05.449Z,1478871545.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:05.878Z,1478871545.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:06.096Z,1478871546.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:06.294Z,1478871546.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:06.650Z,1478871546.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:06.892Z,1478871546.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:07.057Z,1478871547.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:07.461Z,1478871547.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:07.688Z,1478871547.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:07.845Z,1478871547.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:08.263Z,1478871548.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:08.484Z,1478871548.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:08.679Z,1478871548.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:08.940Z,1478871548.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:09.043Z,1478871549.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:09.453Z,1478871549.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:09.736Z,1478871549.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:09.854Z,1478871549.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:10.251Z,1478871550.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:10.533Z,1478871550.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:10.653Z,1478871550.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:10.944Z,1478871550.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:11.068Z,1478871551.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:11.450Z,1478871551.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:11.740Z,1478871551.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:11.857Z,1478871551.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:12.257Z,1478871552.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:12.460Z,1478871552.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:12.657Z,1478871552.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:13.057Z,1478871553.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:13.256Z,1478871553.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:13.452Z,1478871553.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:13.850Z,1478871553.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:14.053Z,1478871554.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:14.262Z,1478871554.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:14.464Z,1478871554.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:14.662Z,1478871554.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:15.056Z,1478871555.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:15.260Z,1478871555.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:15.461Z,1478871555.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:15.860Z,1478871555.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:16.057Z,1478871556.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:16.261Z,1478871556.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:16.468Z,1478871556.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:16.659Z,1478871556.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:17.069Z,1478871557.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:17.264Z,1478871557.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:17.462Z,1478871557.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:17.859Z,1478871557.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:18.061Z,1478871558.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:18.278Z,1478871558.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:18.472Z,1478871558.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:18.665Z,1478871558.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:19.046Z,1478871559.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:19.268Z,1478871559.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:19.477Z,1478871559.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:19.845Z,1478871559.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:20.064Z,1478871560.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:20.285Z,1478871560.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:20.560Z,1478871560.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:20.689Z,1478871560.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:21.049Z,1478871561.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:21.356Z,1478871561.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:21.465Z,1478871561.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:21.866Z,1478871561.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:22.152Z,1478871562.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:22.260Z,1478871562.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:22.661Z,1478871562.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:22.912Z,1478871562.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:23.061Z,1478871563.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:23.460Z,1478871563.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:23.708Z,1478871563.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:23.861Z,1478871563.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:24.242Z,1478871564.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:24.505Z,1478871564.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:24.645Z,1478871564.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:24.916Z,1478871564.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:25.049Z,1478871565.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:25.476Z,1478871565.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:25.712Z,1478871565.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:25.857Z,1478871565.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:26.253Z,1478871566.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:26.440Z,1478871566.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:26.656Z,1478871566.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:27.052Z,1478871567.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:27.236Z,1478871567.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:27.454Z,1478871567.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:27.851Z,1478871567.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:28.033Z,1478871568.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:28.262Z,1478871568.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:28.444Z,1478871568.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:28.657Z,1478871568.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:29.065Z,1478871569.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:29.242Z,1478871569.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:29.460Z,1478871569.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:29.869Z,1478871569.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:30.048Z,1478871570.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:30.271Z,1478871570.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:30.468Z,1478871570.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:30.665Z,1478871570.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:31.041Z,1478871571.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:31.264Z,1478871571.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:31.440Z,1478871571.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:31.853Z,1478871571.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:32.060Z,1478871572.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:32.281Z,1478871572.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:32.472Z,1478871572.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:32.710Z,1478871572.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:33.056Z,1478871573.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:33.268Z,1478871573.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:33.493Z,1478871573.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:33.848Z,1478871573.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:34.064Z,1478871574.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:34.295Z,1478871574.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:34.552Z,1478871574.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:34.697Z,1478871574.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:35.051Z,1478871575.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:35.348Z,1478871575.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:35.457Z,1478871575.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:35.857Z,1478871575.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:36.144Z,1478871576.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:36.257Z,1478871576.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:36.649Z,1478871576.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:36.888Z,1478871576.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:37.065Z,1478871577.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:37.461Z,1478871577.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:37.684Z,1478871577.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:37.860Z,1478871577.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:38.261Z,1478871578.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:38.481Z,1478871578.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:38.640Z,1478871578.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:38.892Z,1478871578.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:39.045Z,1478871579.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:39.449Z,1478871579.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:39.688Z,1478871579.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:39.844Z,1478871579.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:40.249Z,1478871580.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:40.420Z,1478871580.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:40.655Z,1478871580.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:41.053Z,1478871581.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:41.217Z,1478871581.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:41.456Z,1478871581.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:41.853Z,1478871581.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:42.013Z,1478871582.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:42.251Z,1478871582.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:42.426Z,1478871582.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:42.657Z,1478871582.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:43.048Z,1478871583.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:43.220Z,1478871583.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:43.459Z,1478871583.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:43.853Z,1478871583.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:44.024Z,1478871584.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:44.261Z,1478871584.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:44.444Z,1478871584.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:44.657Z,1478871584.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:45.056Z,1478871585.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:45.242Z,1478871585.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:45.459Z,1478871585.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:45.861Z,1478871585.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:46.036Z,1478871586.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:46.261Z,1478871586.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:46.448Z,1478871586.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:46.711Z,1478871586.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:47.053Z,1478871587.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:47.244Z,1478871587.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:47.485Z,1478871587.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:47.851Z,1478871587.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:48.040Z,1478871588.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:48.305Z,1478871588.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:48.512Z,1478871588.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:48.693Z,1478871588.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:49.047Z,1478871589.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:49.308Z,1478871589.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:49.449Z,1478871589.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:49.858Z,1478871589.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:50.105Z,1478871590.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:50.249Z,1478871590.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:50.659Z,1478871590.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:50.868Z,1478871590.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:51.050Z,1478871591.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:51.453Z,1478871591.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:51.664Z,1478871591.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:51.868Z,1478871591.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:52.250Z,1478871592.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:52.461Z,1478871592.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:52.657Z,1478871592.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:52.872Z,1478871592.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:53.066Z,1478871593.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:53.465Z,1478871593.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:53.668Z,1478871593.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:53.857Z,1478871593.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:54.261Z,1478871594.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:54.396Z,1478871594.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:54.653Z,1478871594.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:55.060Z,1478871595.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:55.194Z,1478871595.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:55.410Z,1478871595.410 [NAL9602](INFO): SBD MO Status=2, MOMSN=347, MT Status=2, MTMSN=0
2016-11-11T13:39:55.410Z,1478871595.410 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T13:39:55.469Z,1478871595.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:55.865Z,1478871595.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:55.989Z,1478871595.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:56.261Z,1478871596.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:56.404Z,1478871596.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:56.657Z,1478871596.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:57.061Z,1478871597.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:57.200Z,1478871597.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:57.461Z,1478871597.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:57.857Z,1478871597.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:57.997Z,1478871597.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:58.265Z,1478871598.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:58.408Z,1478871598.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:58.664Z,1478871598.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:59.044Z,1478871599.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:59.206Z,1478871599.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:39:59.449Z,1478871599.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:39:59.859Z,1478871599.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:00.001Z,1478871600.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:00.251Z,1478871600.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:00.412Z,1478871600.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:00.685Z,1478871600.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:01.208Z,1478871601.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:02.004Z,1478871602.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:02.500Z,1478871602.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:03.296Z,1478871603.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:03.990Z,1478871603.990 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T13:40:04.016Z,1478871604.016 [BPC1](ERROR): Failed to receive battery data
2016-11-11T13:40:04.016Z,1478871604.016 [BPC1] Communications Fault, FailCount= 1
2016-11-11T13:40:04.016Z,1478871604.016 [BPC1](ERROR): Communications Fault
2016-11-11T13:40:04.053Z,1478871604.053 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:04.053Z,1478871604.053 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 157
2016-11-11T13:40:04.053Z,1478871604.053 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:40:04.060Z,1478871604.060 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:04.060Z,1478871604.060 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 157
2016-11-11T13:40:04.060Z,1478871604.060 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:40:04.072Z,1478871604.072 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:04.072Z,1478871604.072 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 157
2016-11-11T13:40:04.072Z,1478871604.072 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:40:04.092Z,1478871604.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:04.095Z,1478871604.095 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:40:04.099Z,1478871604.099 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:40:04.100Z,1478871604.099 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:40:04.100Z,1478871604.100 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T13:40:04.231Z,1478871604.231 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:40:04.231Z,1478871604.231 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 157
2016-11-11T13:40:04.236Z,1478871604.236 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:40:04.236Z,1478871604.236 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 157
2016-11-11T13:40:04.236Z,1478871604.236 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:40:04.236Z,1478871604.237 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 157
2016-11-11T13:40:04.592Z,1478871604.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:40:04.592Z,1478871604.592 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:40:04.593Z,1478871604.593 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:40:04.610Z,1478871604.610 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:40:04.610Z,1478871604.610 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:40:04.610Z,1478871604.611 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:40:04.619Z,1478871604.619 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:40:04.620Z,1478871604.620 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:40:04.620Z,1478871604.620 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:40:04.848Z,1478871604.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:04.953Z,1478871604.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:05.021Z,1478871605.021 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:40:05.021Z,1478871605.021 [BPC1] No Fault, FailCount= 1
2016-11-11T13:40:05.397Z,1478871605.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:05.644Z,1478871605.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:05.753Z,1478871605.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:06.189Z,1478871606.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:06.441Z,1478871606.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:06.547Z,1478871606.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:06.852Z,1478871606.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:06.957Z,1478871606.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:07.350Z,1478871607.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:07.648Z,1478871607.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:07.751Z,1478871607.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:08.221Z,1478871608.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:08.376Z,1478871608.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:08.554Z,1478871608.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:08.971Z,1478871608.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:09.172Z,1478871609.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:09.312Z,1478871609.312 [NAL9602](INFO): Powering down
2016-11-11T13:40:09.346Z,1478871609.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:09.757Z,1478871609.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:09.969Z,1478871609.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:10.169Z,1478871610.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:10.380Z,1478871610.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:10.565Z,1478871610.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:10.967Z,1478871610.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:11.176Z,1478871611.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:11.362Z,1478871611.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:11.767Z,1478871611.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:11.984Z,1478871611.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:12.167Z,1478871612.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:12.408Z,1478871612.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:12.562Z,1478871612.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:12.969Z,1478871612.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:13.204Z,1478871613.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:13.349Z,1478871613.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:13.750Z,1478871613.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:14.000Z,1478871614.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:14.181Z,1478871614.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:14.408Z,1478871614.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:14.549Z,1478871614.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:14.956Z,1478871614.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:15.204Z,1478871615.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:15.354Z,1478871615.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:15.751Z,1478871615.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:16.000Z,1478871616.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:16.158Z,1478871616.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:16.476Z,1478871616.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:16.562Z,1478871616.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:16.970Z,1478871616.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:17.272Z,1478871617.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:17.354Z,1478871617.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:17.771Z,1478871617.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:18.068Z,1478871618.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:18.177Z,1478871618.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:18.552Z,1478871618.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:18.828Z,1478871618.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:18.974Z,1478871618.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:19.382Z,1478871619.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:19.624Z,1478871619.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:19.749Z,1478871619.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:20.149Z,1478871620.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:20.421Z,1478871620.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:20.553Z,1478871620.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:20.832Z,1478871620.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:20.952Z,1478871620.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:21.402Z,1478871621.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:21.629Z,1478871621.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:21.766Z,1478871621.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:22.152Z,1478871622.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:22.352Z,1478871622.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:22.559Z,1478871622.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:22.953Z,1478871622.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:23.148Z,1478871623.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:23.352Z,1478871623.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:23.771Z,1478871623.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:23.945Z,1478871623.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:24.179Z,1478871624.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:24.356Z,1478871624.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:24.552Z,1478871624.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:24.968Z,1478871624.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:25.152Z,1478871625.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:25.353Z,1478871625.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:25.751Z,1478871625.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:25.949Z,1478871625.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:26.187Z,1478871626.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:26.360Z,1478871626.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:26.553Z,1478871626.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:26.962Z,1478871626.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:27.156Z,1478871627.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:27.359Z,1478871627.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:27.767Z,1478871627.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:27.953Z,1478871627.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:28.166Z,1478871628.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:28.364Z,1478871628.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:28.564Z,1478871628.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:29.001Z,1478871629.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:29.160Z,1478871629.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:29.348Z,1478871629.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:29.785Z,1478871629.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:29.956Z,1478871629.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:30.152Z,1478871630.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:30.448Z,1478871630.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:30.552Z,1478871630.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:30.952Z,1478871630.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:31.244Z,1478871631.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:31.370Z,1478871631.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:31.754Z,1478871631.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:32.040Z,1478871632.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:32.197Z,1478871632.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:32.564Z,1478871632.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:32.804Z,1478871632.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:32.992Z,1478871632.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:33.356Z,1478871633.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:33.600Z,1478871633.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:33.800Z,1478871633.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:34.154Z,1478871634.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:34.397Z,1478871634.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:34.552Z,1478871634.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:34.808Z,1478871634.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:34.976Z,1478871634.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:35.362Z,1478871635.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:35.604Z,1478871635.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:35.765Z,1478871635.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:36.170Z,1478871636.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:36.332Z,1478871636.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:36.563Z,1478871636.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:36.969Z,1478871636.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:37.128Z,1478871637.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:37.405Z,1478871637.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:37.749Z,1478871637.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:37.925Z,1478871637.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:38.157Z,1478871638.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:38.336Z,1478871638.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:38.557Z,1478871638.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:38.951Z,1478871638.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:39.134Z,1478871639.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:39.368Z,1478871639.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:39.764Z,1478871639.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:39.929Z,1478871639.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:40.157Z,1478871640.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:40.344Z,1478871640.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:40.573Z,1478871640.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:40.980Z,1478871640.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:41.140Z,1478871641.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:41.393Z,1478871641.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:41.777Z,1478871641.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:41.937Z,1478871641.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:42.154Z,1478871642.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:42.348Z,1478871642.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:42.544Z,1478871642.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:42.997Z,1478871642.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:43.144Z,1478871643.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:43.356Z,1478871643.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:43.765Z,1478871643.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:43.942Z,1478871643.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:44.166Z,1478871644.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:44.428Z,1478871644.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:44.563Z,1478871644.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:44.985Z,1478871644.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:45.224Z,1478871645.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:45.368Z,1478871645.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:45.781Z,1478871645.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:46.021Z,1478871646.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:46.157Z,1478871646.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:46.588Z,1478871646.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:46.784Z,1478871646.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:46.952Z,1478871646.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:47.390Z,1478871647.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:47.580Z,1478871647.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:47.850Z,1478871647.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:48.154Z,1478871648.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:48.383Z,1478871648.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:48.557Z,1478871648.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:48.812Z,1478871648.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:48.967Z,1478871648.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:49.366Z,1478871649.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:49.608Z,1478871649.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:49.756Z,1478871649.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:50.143Z,1478871650.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:50.312Z,1478871650.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:50.552Z,1478871650.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:50.948Z,1478871650.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:51.108Z,1478871651.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:51.357Z,1478871651.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:51.757Z,1478871651.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:51.905Z,1478871651.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:52.157Z,1478871652.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:52.316Z,1478871652.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:52.557Z,1478871652.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:52.953Z,1478871652.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:53.112Z,1478871653.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:53.354Z,1478871653.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:53.766Z,1478871653.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:53.920Z,1478871653.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:54.210Z,1478871654.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:54.344Z,1478871654.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:54.576Z,1478871654.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:54.956Z,1478871654.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:55.140Z,1478871655.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:55.368Z,1478871655.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:55.771Z,1478871655.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:55.936Z,1478871655.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:56.179Z,1478871656.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:56.344Z,1478871656.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:56.573Z,1478871656.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:56.948Z,1478871656.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:57.140Z,1478871657.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:57.349Z,1478871657.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:57.757Z,1478871657.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:57.936Z,1478871657.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:58.166Z,1478871658.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:58.412Z,1478871658.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:58.557Z,1478871658.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:59.035Z,1478871659.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:59.209Z,1478871659.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:40:59.348Z,1478871659.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:40:59.793Z,1478871659.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:00.004Z,1478871660.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:00.163Z,1478871660.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:00.589Z,1478871660.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:00.760Z,1478871660.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:00.957Z,1478871660.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:01.556Z,1478871661.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:02.352Z,1478871662.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:02.772Z,1478871662.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:03.568Z,1478871663.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:04.300Z,1478871664.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:04.413Z,1478871664.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:04.545Z,1478871664.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:04.964Z,1478871664.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:05.096Z,1478871665.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:05.315Z,1478871665.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:05.716Z,1478871665.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:05.896Z,1478871665.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:06.124Z,1478871666.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:06.312Z,1478871666.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:06.527Z,1478871666.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:06.920Z,1478871666.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:07.108Z,1478871667.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:07.321Z,1478871667.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:07.729Z,1478871667.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:07.907Z,1478871667.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:08.133Z,1478871668.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:08.316Z,1478871668.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:08.529Z,1478871668.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:08.914Z,1478871668.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:09.112Z,1478871669.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:09.316Z,1478871669.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:09.722Z,1478871669.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:09.908Z,1478871669.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:10.126Z,1478871670.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:10.316Z,1478871670.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:10.513Z,1478871670.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:10.921Z,1478871670.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:11.112Z,1478871671.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:11.325Z,1478871671.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:11.712Z,1478871671.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:11.908Z,1478871671.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:12.140Z,1478871672.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:12.396Z,1478871672.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:12.513Z,1478871672.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:12.916Z,1478871672.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:13.192Z,1478871673.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:13.315Z,1478871673.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:13.721Z,1478871673.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:13.988Z,1478871673.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:14.119Z,1478871674.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:14.522Z,1478871674.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:14.740Z,1478871674.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:14.919Z,1478871674.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:15.341Z,1478871675.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:15.536Z,1478871675.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:15.722Z,1478871675.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:16.128Z,1478871676.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:16.333Z,1478871676.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:16.528Z,1478871676.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:16.744Z,1478871676.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:16.982Z,1478871676.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:17.313Z,1478871677.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:17.540Z,1478871677.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:17.714Z,1478871677.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:18.149Z,1478871678.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:18.268Z,1478871678.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:18.514Z,1478871678.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:18.950Z,1478871678.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:19.064Z,1478871679.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:19.353Z,1478871679.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:19.721Z,1478871679.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:19.861Z,1478871679.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:20.116Z,1478871680.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:20.272Z,1478871680.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:20.525Z,1478871680.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:20.930Z,1478871680.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:21.068Z,1478871681.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:21.330Z,1478871681.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:21.744Z,1478871681.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:21.864Z,1478871681.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:22.156Z,1478871682.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:22.276Z,1478871682.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:22.526Z,1478871682.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:22.926Z,1478871682.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:23.072Z,1478871683.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:23.328Z,1478871683.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:23.717Z,1478871683.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:23.869Z,1478871683.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:24.139Z,1478871684.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:24.288Z,1478871684.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:24.550Z,1478871684.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:24.914Z,1478871684.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:25.085Z,1478871685.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:25.345Z,1478871685.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:25.729Z,1478871685.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:25.880Z,1478871685.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:26.138Z,1478871686.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:26.372Z,1478871686.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:26.545Z,1478871686.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:26.934Z,1478871686.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:27.168Z,1478871687.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:27.338Z,1478871687.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:27.737Z,1478871687.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:27.964Z,1478871687.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:28.127Z,1478871688.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:28.518Z,1478871688.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:28.736Z,1478871688.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:28.947Z,1478871688.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:29.352Z,1478871689.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:29.534Z,1478871689.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:29.715Z,1478871689.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:30.114Z,1478871690.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:30.329Z,1478871690.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:30.585Z,1478871690.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:30.740Z,1478871690.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:30.929Z,1478871690.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:31.356Z,1478871691.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:31.536Z,1478871691.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:31.739Z,1478871691.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:32.164Z,1478871692.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:32.292Z,1478871692.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:32.552Z,1478871692.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:32.975Z,1478871692.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:33.088Z,1478871693.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:33.344Z,1478871693.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:33.714Z,1478871693.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:33.884Z,1478871693.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:34.120Z,1478871694.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:34.294Z,1478871694.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:34.540Z,1478871694.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:34.946Z,1478871694.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:35.088Z,1478871695.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:35.349Z,1478871695.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:35.744Z,1478871695.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:35.884Z,1478871695.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:36.142Z,1478871696.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:36.292Z,1478871696.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:36.535Z,1478871696.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:36.910Z,1478871696.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:37.088Z,1478871697.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:37.350Z,1478871697.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:37.733Z,1478871697.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:37.884Z,1478871697.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:38.126Z,1478871698.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:38.292Z,1478871698.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:38.572Z,1478871698.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:38.953Z,1478871698.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:39.088Z,1478871699.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:39.355Z,1478871699.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:39.733Z,1478871699.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:39.884Z,1478871699.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:40.118Z,1478871700.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:40.348Z,1478871700.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:40.568Z,1478871700.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:40.942Z,1478871700.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:41.144Z,1478871701.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:41.343Z,1478871701.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:41.714Z,1478871701.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:41.940Z,1478871701.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:42.144Z,1478871702.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:42.546Z,1478871702.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:42.688Z,1478871702.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:42.944Z,1478871702.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:43.359Z,1478871703.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:43.484Z,1478871703.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:43.750Z,1478871703.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:44.207Z,1478871704.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:44.281Z,1478871704.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:44.535Z,1478871704.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:44.708Z,1478871704.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:44.926Z,1478871704.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:45.342Z,1478871705.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:45.504Z,1478871705.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:45.844Z,1478871705.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:46.131Z,1478871706.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:46.216Z,1478871706.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:46.511Z,1478871706.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:46.954Z,1478871706.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:47.012Z,1478871707.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:47.329Z,1478871707.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:47.757Z,1478871707.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:47.808Z,1478871707.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:48.145Z,1478871708.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:48.534Z,1478871708.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:48.604Z,1478871708.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:48.928Z,1478871708.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:49.340Z,1478871709.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:49.400Z,1478871709.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:49.723Z,1478871709.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:50.119Z,1478871710.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:50.196Z,1478871710.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:50.521Z,1478871710.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:50.916Z,1478871710.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:50.992Z,1478871710.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:51.326Z,1478871711.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:51.727Z,1478871711.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:51.788Z,1478871711.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:52.122Z,1478871712.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:52.529Z,1478871712.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:52.584Z,1478871712.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:52.920Z,1478871712.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:53.328Z,1478871713.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:53.380Z,1478871713.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:53.727Z,1478871713.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:54.133Z,1478871714.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:54.176Z,1478871714.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:54.531Z,1478871714.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:54.918Z,1478871714.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:54.972Z,1478871714.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:55.322Z,1478871715.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:55.733Z,1478871715.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:55.768Z,1478871715.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:56.123Z,1478871716.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:56.526Z,1478871716.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:56.564Z,1478871716.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:56.919Z,1478871716.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:57.353Z,1478871717.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:57.360Z,1478871717.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:57.714Z,1478871717.714 [PNI_TCM](ERROR): CRC does not match. Expected:0x7485 got:0x17604
2016-11-11T13:41:57.734Z,1478871717.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:58.135Z,1478871718.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:58.156Z,1478871718.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:58.523Z,1478871718.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:58.938Z,1478871718.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:58.960Z,1478871718.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:41:59.325Z,1478871719.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:59.729Z,1478871719.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:41:59.768Z,1478871719.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:00.153Z,1478871720.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:00.529Z,1478871720.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:00.564Z,1478871720.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:00.926Z,1478871720.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:01.321Z,1478871721.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:01.360Z,1478871721.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:02.156Z,1478871722.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:02.952Z,1478871722.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:03.748Z,1478871723.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:04.544Z,1478871724.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:04.952Z,1478871724.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:05.214Z,1478871725.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:05.345Z,1478871725.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:05.360Z,1478871725.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:05.768Z,1478871725.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:05.800Z,1478871725.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:06.161Z,1478871726.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:06.180Z,1478871726.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:06.516Z,1478871726.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:06.588Z,1478871726.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:06.918Z,1478871726.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:06.996Z,1478871726.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:07.329Z,1478871727.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:07.404Z,1478871727.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:07.719Z,1478871727.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:07.812Z,1478871727.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:08.128Z,1478871728.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:08.220Z,1478871728.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:08.531Z,1478871728.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:08.628Z,1478871728.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:08.932Z,1478871728.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:09.329Z,1478871729.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:09.424Z,1478871729.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:09.730Z,1478871729.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:10.123Z,1478871730.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:10.230Z,1478871730.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:10.529Z,1478871730.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:10.666Z,1478871730.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:10.929Z,1478871730.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:11.322Z,1478871731.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:11.460Z,1478871731.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:11.722Z,1478871731.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:12.120Z,1478871732.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:12.257Z,1478871732.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:12.525Z,1478871732.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:12.672Z,1478871732.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:12.929Z,1478871732.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:13.332Z,1478871733.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:13.468Z,1478871733.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:13.724Z,1478871733.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:14.124Z,1478871734.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:14.184Z,1478871734.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:14.528Z,1478871734.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:14.922Z,1478871734.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:14.980Z,1478871734.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:15.328Z,1478871735.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:15.777Z,1478871735.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:15.790Z,1478871735.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:16.112Z,1478871736.112 [BPC1](ERROR): Failed to parse message.
2016-11-11T13:42:16.112Z,1478871736.112 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T13:42:16.112Z,1478871736.112 [BPC1] Data Fault, FailCount= 1
2016-11-11T13:42:16.112Z,1478871736.112 [BPC1](ERROR): Data Fault
2016-11-11T13:42:16.120Z,1478871736.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:16.161Z,1478871736.161 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T13:42:16.188Z,1478871736.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:16.529Z,1478871736.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:16.925Z,1478871736.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:16.984Z,1478871736.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:17.322Z,1478871737.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:17.355Z,1478871737.355 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:42:17.355Z,1478871737.355 [BPC1] No Fault, FailCount= 1
2016-11-11T13:42:17.781Z,1478871737.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:17.869Z,1478871737.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:18.158Z,1478871738.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:18.216Z,1478871738.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:18.523Z,1478871738.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:18.935Z,1478871738.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:19.012Z,1478871739.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:19.329Z,1478871739.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:19.789Z,1478871739.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:19.808Z,1478871739.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:20.129Z,1478871740.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:20.216Z,1478871740.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:20.532Z,1478871740.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:20.928Z,1478871740.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:21.013Z,1478871741.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:21.333Z,1478871741.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:21.740Z,1478871741.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:21.808Z,1478871741.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:22.133Z,1478871742.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:22.260Z,1478871742.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:22.537Z,1478871742.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:22.921Z,1478871742.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:23.056Z,1478871743.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:23.317Z,1478871743.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:23.758Z,1478871743.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:23.852Z,1478871743.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:24.131Z,1478871744.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:24.525Z,1478871744.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:24.620Z,1478871744.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:24.920Z,1478871744.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:25.320Z,1478871745.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:25.416Z,1478871745.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:25.720Z,1478871745.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:26.124Z,1478871746.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:26.213Z,1478871746.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:26.522Z,1478871746.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:26.628Z,1478871746.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:26.922Z,1478871746.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:27.328Z,1478871747.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:27.424Z,1478871747.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:27.798Z,1478871747.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:28.129Z,1478871748.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:28.168Z,1478871748.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:28.531Z,1478871748.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:28.933Z,1478871748.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:28.964Z,1478871748.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:29.328Z,1478871749.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:29.761Z,1478871749.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:29.789Z,1478871749.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:30.121Z,1478871750.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:30.172Z,1478871750.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:30.522Z,1478871750.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:30.928Z,1478871750.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:30.968Z,1478871750.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:31.330Z,1478871751.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:31.764Z,1478871751.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:31.782Z,1478871751.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:32.125Z,1478871752.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:32.176Z,1478871752.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:32.525Z,1478871752.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:32.925Z,1478871752.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:32.972Z,1478871752.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:33.313Z,1478871753.313 [BPC1](ERROR): Failed to receive battery data
2016-11-11T13:42:33.313Z,1478871753.313 [BPC1] Communications Fault, FailCount= 2
2016-11-11T13:42:33.313Z,1478871753.313 [BPC1](ERROR): Communications Fault
2016-11-11T13:42:33.329Z,1478871753.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:33.385Z,1478871753.385 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T13:42:33.768Z,1478871753.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:33.795Z,1478871753.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:34.117Z,1478871754.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:34.176Z,1478871754.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:34.517Z,1478871754.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:34.569Z,1478871754.569 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:42:34.569Z,1478871754.569 [BPC1] No Fault, FailCount= 2
2016-11-11T13:42:34.958Z,1478871754.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:34.972Z,1478871754.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:35.350Z,1478871755.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:35.717Z,1478871755.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:35.768Z,1478871755.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:36.119Z,1478871756.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:36.240Z,1478871756.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:36.533Z,1478871756.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:36.917Z,1478871756.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:37.036Z,1478871757.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:37.317Z,1478871757.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:37.720Z,1478871757.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:37.833Z,1478871757.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:38.121Z,1478871758.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:38.525Z,1478871758.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:38.604Z,1478871758.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:38.918Z,1478871758.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:39.325Z,1478871759.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:39.400Z,1478871759.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:39.720Z,1478871759.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:40.119Z,1478871760.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:40.197Z,1478871760.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:40.528Z,1478871760.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:40.608Z,1478871760.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:40.922Z,1478871760.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:41.321Z,1478871761.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:41.406Z,1478871761.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:41.785Z,1478871761.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:42.132Z,1478871762.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:42.156Z,1478871762.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:42.532Z,1478871762.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:42.932Z,1478871762.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:42.952Z,1478871762.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:43.332Z,1478871763.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:43.748Z,1478871763.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:43.803Z,1478871763.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:44.137Z,1478871764.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:44.156Z,1478871764.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:44.539Z,1478871764.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:44.916Z,1478871764.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:44.952Z,1478871764.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:45.321Z,1478871765.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:45.748Z,1478871765.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:45.792Z,1478871765.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:46.118Z,1478871766.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:46.168Z,1478871766.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:46.525Z,1478871766.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:46.924Z,1478871766.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:46.964Z,1478871766.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:47.353Z,1478871767.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:47.760Z,1478871767.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:47.777Z,1478871767.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:48.120Z,1478871768.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:48.168Z,1478871768.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:48.549Z,1478871768.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:48.917Z,1478871768.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:48.964Z,1478871768.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:49.345Z,1478871769.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:49.749Z,1478871769.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:49.760Z,1478871769.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:50.123Z,1478871770.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:50.224Z,1478871770.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:50.520Z,1478871770.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:50.919Z,1478871770.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:51.020Z,1478871771.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:51.319Z,1478871771.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:51.720Z,1478871771.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:51.816Z,1478871771.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:52.119Z,1478871772.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:52.525Z,1478871772.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:52.592Z,1478871772.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:52.938Z,1478871772.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:53.322Z,1478871773.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:53.388Z,1478871773.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:53.731Z,1478871773.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:54.181Z,1478871774.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:54.184Z,1478871774.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:54.521Z,1478871774.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:54.600Z,1478871774.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:54.925Z,1478871774.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:55.319Z,1478871775.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:55.396Z,1478871775.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:55.769Z,1478871775.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:56.121Z,1478871776.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:56.148Z,1478871776.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:56.525Z,1478871776.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:56.925Z,1478871776.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:56.944Z,1478871776.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:57.321Z,1478871777.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:57.740Z,1478871777.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:57.774Z,1478871777.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:58.122Z,1478871778.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:58.152Z,1478871778.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:58.515Z,1478871778.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:58.933Z,1478871778.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:58.948Z,1478871778.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:59.326Z,1478871779.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:42:59.744Z,1478871779.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:42:59.774Z,1478871779.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:00.130Z,1478871780.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:00.147Z,1478871780.147 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T13:43:00.147Z,1478871780.147 [Default:CheckIn:C.Wait] Stopped
2016-11-11T13:43:00.147Z,1478871780.147 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T13:43:00.152Z,1478871780.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:00.152Z,1478871780.152 [Default:CheckIn:D] Running Loop=1
2016-11-11T13:43:00.532Z,1478871780.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:00.549Z,1478871780.549 [Default:CheckIn:D] Stopped
2016-11-11T13:43:00.550Z,1478871780.550 [Default:CheckIn:E] Running Loop=1
2016-11-11T13:43:00.933Z,1478871780.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:00.948Z,1478871780.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:00.951Z,1478871780.951 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 532.987337 min 
2016-11-11T13:43:00.963Z,1478871780.963 [Default:CheckIn:E] Stopped
2016-11-11T13:43:00.963Z,1478871780.963 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T13:43:00.963Z,1478871780.963 [Default:CheckIn] Stopped
2016-11-11T13:43:00.964Z,1478871780.964 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T13:43:00.964Z,1478871780.964 [Default:CheckIn](INFO): Running loop #52
2016-11-11T13:43:00.964Z,1478871780.964 [Default:CheckIn] Running Loop=52
2016-11-11T13:43:00.964Z,1478871780.964 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T13:43:00.964Z,1478871780.964 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T13:43:01.325Z,1478871781.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:01.744Z,1478871781.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:02.152Z,1478871782.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:02.948Z,1478871782.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:03.744Z,1478871783.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:04.208Z,1478871784.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:04.720Z,1478871784.720 [NAL9602](INFO): Powering up
2016-11-11T13:43:04.817Z,1478871784.817 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:04.817Z,1478871784.818 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 158
2016-11-11T13:43:04.817Z,1478871784.818 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:43:04.833Z,1478871784.833 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:04.833Z,1478871784.833 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 158
2016-11-11T13:43:04.833Z,1478871784.833 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:43:04.835Z,1478871784.835 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:04.836Z,1478871784.836 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 158
2016-11-11T13:43:04.836Z,1478871784.836 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:43:04.864Z,1478871784.865 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:43:04.865Z,1478871784.865 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:43:04.865Z,1478871784.865 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:43:04.973Z,1478871784.973 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:43:04.973Z,1478871784.973 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 158
2016-11-11T13:43:04.974Z,1478871784.974 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:43:04.974Z,1478871784.974 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 158
2016-11-11T13:43:04.975Z,1478871784.974 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:43:04.975Z,1478871784.975 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 158
2016-11-11T13:43:05.004Z,1478871785.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:05.328Z,1478871785.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:43:05.329Z,1478871785.329 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:43:05.329Z,1478871785.329 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:43:05.334Z,1478871785.334 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:43:05.334Z,1478871785.334 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:43:05.335Z,1478871785.335 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:43:05.335Z,1478871785.335 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:43:05.335Z,1478871785.335 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:43:05.336Z,1478871785.336 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:43:05.745Z,1478871785.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:05.800Z,1478871785.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:06.169Z,1478871786.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:06.548Z,1478871786.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:06.564Z,1478871786.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:06.920Z,1478871786.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:07.354Z,1478871787.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:07.360Z,1478871787.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:07.719Z,1478871787.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:08.156Z,1478871788.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:08.193Z,1478871788.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:08.529Z,1478871788.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:08.568Z,1478871788.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:08.926Z,1478871788.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:09.328Z,1478871789.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:09.364Z,1478871789.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:09.793Z,1478871789.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:10.098Z,1478871790.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:10.125Z,1478871790.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:10.519Z,1478871790.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:10.893Z,1478871790.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:10.921Z,1478871790.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:11.325Z,1478871791.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:11.694Z,1478871791.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:11.747Z,1478871791.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:12.128Z,1478871792.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:12.136Z,1478871792.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:12.530Z,1478871792.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:12.922Z,1478871792.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:12.932Z,1478871792.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:13.329Z,1478871793.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:13.728Z,1478871793.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:13.746Z,1478871793.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:14.126Z,1478871794.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:14.136Z,1478871794.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:14.533Z,1478871794.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:14.932Z,1478871794.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:14.933Z,1478871794.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:15.332Z,1478871795.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:15.682Z,1478871795.682 [NAL9602](INFO): NAL9602 initialized
2016-11-11T13:43:15.728Z,1478871795.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:15.746Z,1478871795.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:16.132Z,1478871796.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:16.136Z,1478871796.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:16.541Z,1478871796.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:16.932Z,1478871796.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:16.936Z,1478871796.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:17.340Z,1478871797.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:17.713Z,1478871797.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:17.728Z,1478871797.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:18.149Z,1478871798.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:18.196Z,1478871798.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:18.550Z,1478871798.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:18.921Z,1478871798.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:18.992Z,1478871798.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:19.381Z,1478871799.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:19.719Z,1478871799.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:19.788Z,1478871799.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:20.215Z,1478871800.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:20.530Z,1478871800.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:20.556Z,1478871800.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:20.965Z,1478871800.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:21.349Z,1478871801.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:21.352Z,1478871801.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:21.728Z,1478871801.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:22.149Z,1478871802.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:22.174Z,1478871802.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:22.517Z,1478871802.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:22.560Z,1478871802.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:22.925Z,1478871802.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:23.315Z,1478871803.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:23.356Z,1478871803.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:23.734Z,1478871803.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:24.064Z,1478871804.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:24.132Z,1478871804.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:24.520Z,1478871804.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:24.860Z,1478871804.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:24.929Z,1478871804.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:25.322Z,1478871805.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:25.657Z,1478871805.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:25.744Z,1478871805.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:26.068Z,1478871806.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:26.124Z,1478871806.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:26.522Z,1478871806.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:26.864Z,1478871806.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:26.932Z,1478871806.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:27.329Z,1478871807.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:27.661Z,1478871807.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:27.756Z,1478871807.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:28.072Z,1478871808.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:28.128Z,1478871808.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:28.529Z,1478871808.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:28.868Z,1478871808.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:28.934Z,1478871808.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:29.330Z,1478871809.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:29.666Z,1478871809.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:29.756Z,1478871809.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:30.088Z,1478871810.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:30.138Z,1478871810.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:30.537Z,1478871810.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:30.884Z,1478871810.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:30.914Z,1478871810.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:31.321Z,1478871811.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:31.680Z,1478871811.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:31.796Z,1478871811.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:32.120Z,1478871812.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:32.160Z,1478871812.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:32.530Z,1478871812.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:32.924Z,1478871812.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:32.956Z,1478871812.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:33.358Z,1478871813.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:33.752Z,1478871813.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:33.757Z,1478871813.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:34.174Z,1478871814.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:34.517Z,1478871814.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:34.528Z,1478871814.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:34.957Z,1478871814.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:35.322Z,1478871815.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:35.332Z,1478871815.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:35.751Z,1478871815.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:36.128Z,1478871816.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:36.194Z,1478871816.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:36.537Z,1478871816.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:36.553Z,1478871816.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:36.920Z,1478871816.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:37.325Z,1478871817.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:37.360Z,1478871817.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:37.731Z,1478871817.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:38.040Z,1478871818.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:38.129Z,1478871818.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:38.522Z,1478871818.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:38.836Z,1478871818.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:38.922Z,1478871818.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:39.329Z,1478871819.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:39.633Z,1478871819.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:39.730Z,1478871819.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:40.044Z,1478871820.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:40.126Z,1478871820.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:40.529Z,1478871820.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:40.840Z,1478871820.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:40.925Z,1478871820.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:41.333Z,1478871821.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:41.648Z,1478871821.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:41.738Z,1478871821.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:42.068Z,1478871822.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:42.130Z,1478871822.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:42.525Z,1478871822.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:42.865Z,1478871822.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:42.925Z,1478871822.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:43.329Z,1478871823.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:43.660Z,1478871823.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:43.744Z,1478871823.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:44.068Z,1478871824.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:44.118Z,1478871824.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:44.518Z,1478871824.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:44.864Z,1478871824.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:44.922Z,1478871824.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:45.321Z,1478871825.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:45.660Z,1478871825.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:45.778Z,1478871825.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:46.125Z,1478871826.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:46.168Z,1478871826.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:46.529Z,1478871826.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:46.922Z,1478871826.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:46.964Z,1478871826.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:47.305Z,1478871827.305 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T13:43:47.306Z,1478871827.306 [BPC1] Data Fault, FailCount= 1
2016-11-11T13:43:47.306Z,1478871827.306 [BPC1](ERROR): Data Fault
2016-11-11T13:43:47.335Z,1478871827.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:47.385Z,1478871827.385 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T13:43:47.681Z,1478871827.681 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-11T13:43:47.755Z,1478871827.755 [NAL9602](FAULT): received: 
+CSQ:0

OK7, 2, 0, 0, 0

OK
2016-11-11T13:43:47.755Z,1478871827.755 [NAL9602] Data Fault, FailCount= 1
2016-11-11T13:43:47.755Z,1478871827.755 [NAL9602](ERROR): Data Fault
2016-11-11T13:43:47.760Z,1478871827.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:47.822Z,1478871827.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:47.862Z,1478871827.862 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T13:43:48.082Z,1478871828.082 [NAL9602](INFO): Powering down
2016-11-11T13:43:48.181Z,1478871828.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:48.504Z,1478871828.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:48.520Z,1478871828.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:48.560Z,1478871828.560 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:43:48.560Z,1478871828.560 [BPC1] No Fault, FailCount= 1
2016-11-11T13:43:48.973Z,1478871828.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:49.009Z,1478871829.009 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T13:43:49.009Z,1478871829.010 [NAL9602] No Fault, FailCount= 1
2016-11-11T13:43:49.300Z,1478871829.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:49.351Z,1478871829.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:49.725Z,1478871829.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:50.097Z,1478871830.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:50.161Z,1478871830.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:50.531Z,1478871830.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:50.532Z,1478871830.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:50.933Z,1478871830.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:51.324Z,1478871831.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:51.328Z,1478871831.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:51.711Z,1478871831.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:52.028Z,1478871832.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:52.137Z,1478871832.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:52.515Z,1478871832.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:52.824Z,1478871832.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:52.917Z,1478871832.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:53.281Z,1478871833.281 [NAL9602](INFO): Powering up NAL9602
2016-11-11T13:43:53.329Z,1478871833.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:53.621Z,1478871833.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:53.719Z,1478871833.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:54.032Z,1478871834.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:54.125Z,1478871834.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:54.525Z,1478871834.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:54.828Z,1478871834.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:54.919Z,1478871834.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:55.333Z,1478871835.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:55.625Z,1478871835.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:55.727Z,1478871835.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:56.036Z,1478871836.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:56.122Z,1478871836.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:56.524Z,1478871836.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:56.832Z,1478871836.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:56.933Z,1478871836.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:57.322Z,1478871837.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:57.629Z,1478871837.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:57.734Z,1478871837.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:58.040Z,1478871838.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:58.129Z,1478871838.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:58.533Z,1478871838.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:58.836Z,1478871838.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:58.916Z,1478871838.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:59.317Z,1478871839.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:43:59.632Z,1478871839.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:43:59.780Z,1478871839.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:00.128Z,1478871840.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:00.160Z,1478871840.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:00.529Z,1478871840.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:00.949Z,1478871840.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:00.956Z,1478871840.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:01.331Z,1478871841.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:01.752Z,1478871841.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:01.758Z,1478871841.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:02.472Z,1478871842.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:03.268Z,1478871843.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:04.065Z,1478871844.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:04.492Z,1478871844.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:05.105Z,1478871845.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:05.237Z,1478871845.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:05.288Z,1478871845.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:05.614Z,1478871845.614 [NAL9602](INFO): NAL9602 initialized
2016-11-11T13:44:05.698Z,1478871845.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:06.008Z,1478871846.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:06.025Z,1478871846.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:06.449Z,1478871846.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:06.804Z,1478871846.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:06.858Z,1478871846.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:07.222Z,1478871847.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:07.602Z,1478871847.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:07.686Z,1478871847.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:08.021Z,1478871848.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:08.068Z,1478871848.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:08.427Z,1478871848.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:08.828Z,1478871848.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:08.864Z,1478871848.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:09.233Z,1478871849.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:09.660Z,1478871849.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:09.679Z,1478871849.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:10.025Z,1478871850.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:10.068Z,1478871850.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:10.421Z,1478871850.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:10.814Z,1478871850.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:10.864Z,1478871850.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:11.221Z,1478871851.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:11.657Z,1478871851.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:11.660Z,1478871851.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:12.014Z,1478871852.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:12.068Z,1478871852.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:12.423Z,1478871852.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:12.815Z,1478871852.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:12.864Z,1478871852.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:13.229Z,1478871853.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:13.624Z,1478871853.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:13.660Z,1478871853.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:14.032Z,1478871854.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:14.104Z,1478871854.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:14.425Z,1478871854.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:14.827Z,1478871854.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:14.900Z,1478871854.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:15.224Z,1478871855.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:15.613Z,1478871855.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:15.696Z,1478871855.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:16.005Z,1478871856.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:16.411Z,1478871856.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:16.464Z,1478871856.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:16.814Z,1478871856.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:17.220Z,1478871857.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:17.260Z,1478871857.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:17.624Z,1478871857.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:18.004Z,1478871858.004 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T13:44:18.005Z,1478871858.005 [BPC1] Data Fault, FailCount= 1
2016-11-11T13:44:18.005Z,1478871858.005 [BPC1](ERROR): Data Fault
2016-11-11T13:44:18.057Z,1478871858.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:18.074Z,1478871858.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:18.143Z,1478871858.143 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T13:44:18.424Z,1478871858.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:18.468Z,1478871858.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:18.820Z,1478871858.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:19.220Z,1478871859.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:19.252Z,1478871859.253 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:44:19.253Z,1478871859.253 [BPC1] No Fault, FailCount= 1
2016-11-11T13:44:19.264Z,1478871859.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:19.721Z,1478871859.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:20.041Z,1478871860.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:20.060Z,1478871860.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:20.417Z,1478871860.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:20.826Z,1478871860.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:20.856Z,1478871860.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:21.209Z,1478871861.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:21.642Z,1478871861.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:21.652Z,1478871861.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:22.017Z,1478871862.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:22.060Z,1478871862.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:22.421Z,1478871862.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:22.813Z,1478871862.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:22.856Z,1478871862.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:23.222Z,1478871863.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:23.638Z,1478871863.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:23.652Z,1478871863.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:24.038Z,1478871864.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:24.060Z,1478871864.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:24.430Z,1478871864.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:24.809Z,1478871864.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:24.856Z,1478871864.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:25.241Z,1478871865.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:25.641Z,1478871865.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:25.652Z,1478871865.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:26.022Z,1478871866.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:26.060Z,1478871866.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:26.414Z,1478871866.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:26.812Z,1478871866.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:26.856Z,1478871866.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:27.215Z,1478871867.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:27.613Z,1478871867.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:27.653Z,1478871867.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:28.034Z,1478871868.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:28.080Z,1478871868.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:28.433Z,1478871868.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:28.816Z,1478871868.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:28.876Z,1478871868.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:29.225Z,1478871869.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:29.610Z,1478871869.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:29.672Z,1478871869.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:30.086Z,1478871870.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:30.417Z,1478871870.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:30.448Z,1478871870.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:30.817Z,1478871870.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:31.216Z,1478871871.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:31.245Z,1478871871.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:31.614Z,1478871871.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:32.040Z,1478871872.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:32.121Z,1478871872.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:32.427Z,1478871872.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:32.452Z,1478871872.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:32.829Z,1478871872.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:33.248Z,1478871873.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:33.261Z,1478871873.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:33.633Z,1478871873.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:33.956Z,1478871873.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:34.049Z,1478871874.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:34.446Z,1478871874.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:34.752Z,1478871874.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:34.819Z,1478871874.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:35.213Z,1478871875.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:35.549Z,1478871875.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:35.636Z,1478871875.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:35.960Z,1478871875.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:36.022Z,1478871876.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:36.428Z,1478871876.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:36.756Z,1478871876.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:36.826Z,1478871876.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:37.225Z,1478871877.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:37.572Z,1478871877.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:37.652Z,1478871877.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:37.996Z,1478871877.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:38.008Z,1478871878.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:38.409Z,1478871878.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:38.793Z,1478871878.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:38.809Z,1478871878.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:39.217Z,1478871879.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:39.588Z,1478871879.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:39.649Z,1478871879.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:39.996Z,1478871879.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:40.012Z,1478871880.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:40.411Z,1478871880.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:40.792Z,1478871880.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:40.818Z,1478871880.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:41.219Z,1478871881.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:41.592Z,1478871881.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:41.670Z,1478871881.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:42.029Z,1478871882.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:42.052Z,1478871882.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:42.437Z,1478871882.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:42.835Z,1478871882.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:42.848Z,1478871882.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:43.209Z,1478871883.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:43.617Z,1478871883.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:43.644Z,1478871883.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:44.075Z,1478871884.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:44.412Z,1478871884.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:44.419Z,1478871884.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:44.849Z,1478871884.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:45.208Z,1478871885.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:45.221Z,1478871885.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:45.623Z,1478871885.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:46.005Z,1478871886.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:46.117Z,1478871886.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:46.412Z,1478871886.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:46.416Z,1478871886.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:46.825Z,1478871886.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:47.212Z,1478871887.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:47.255Z,1478871887.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:47.629Z,1478871887.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:47.936Z,1478871887.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:48.037Z,1478871888.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:48.437Z,1478871888.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:48.732Z,1478871888.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:48.825Z,1478871888.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:49.218Z,1478871889.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:49.529Z,1478871889.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:49.630Z,1478871889.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:49.940Z,1478871889.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:50.025Z,1478871890.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:50.429Z,1478871890.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:50.736Z,1478871890.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:50.829Z,1478871890.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:51.206Z,1478871891.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:51.533Z,1478871891.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:51.637Z,1478871891.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:51.944Z,1478871891.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:52.011Z,1478871892.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:52.412Z,1478871892.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:52.740Z,1478871892.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:52.813Z,1478871892.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:53.221Z,1478871893.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:53.539Z,1478871893.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:53.626Z,1478871893.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:53.956Z,1478871893.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:54.029Z,1478871894.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:54.432Z,1478871894.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:54.752Z,1478871894.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:54.833Z,1478871894.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:55.228Z,1478871895.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:55.548Z,1478871895.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:55.668Z,1478871895.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:56.017Z,1478871896.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:56.064Z,1478871896.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:56.425Z,1478871896.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:56.821Z,1478871896.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:56.860Z,1478871896.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:57.222Z,1478871897.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:57.618Z,1478871897.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:57.656Z,1478871897.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:58.050Z,1478871898.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:58.404Z,1478871898.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:58.431Z,1478871898.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:58.847Z,1478871898.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:59.200Z,1478871899.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:44:59.253Z,1478871899.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:59.625Z,1478871899.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:44:59.996Z,1478871899.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:00.056Z,1478871900.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:00.408Z,1478871900.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:00.426Z,1478871900.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:00.841Z,1478871900.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:01.204Z,1478871901.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:01.230Z,1478871901.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:01.629Z,1478871901.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:01.912Z,1478871901.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:02.037Z,1478871902.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:02.708Z,1478871902.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:03.505Z,1478871903.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:03.916Z,1478871903.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:04.714Z,1478871904.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:05.509Z,1478871905.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:05.676Z,1478871905.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:05.817Z,1478871905.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:05.928Z,1478871905.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:06.205Z,1478871906.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:06.578Z,1478871906.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:06.724Z,1478871906.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:06.973Z,1478871906.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:07.364Z,1478871907.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:07.521Z,1478871907.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:07.774Z,1478871907.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:07.932Z,1478871907.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:08.166Z,1478871908.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:08.575Z,1478871908.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:08.728Z,1478871908.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:09.066Z,1478871909.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:09.366Z,1478871909.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:09.524Z,1478871909.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:09.781Z,1478871909.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:10.020Z,1478871910.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:10.173Z,1478871910.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:10.579Z,1478871910.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:10.816Z,1478871910.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:10.981Z,1478871910.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:11.390Z,1478871911.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:11.613Z,1478871911.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:11.788Z,1478871911.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:12.183Z,1478871912.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:12.364Z,1478871912.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:12.557Z,1478871912.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:12.961Z,1478871912.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:13.160Z,1478871913.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:13.365Z,1478871913.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:13.765Z,1478871913.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:13.957Z,1478871913.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:14.169Z,1478871914.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:14.368Z,1478871914.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:14.565Z,1478871914.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:14.967Z,1478871914.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:15.164Z,1478871915.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:15.365Z,1478871915.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:15.781Z,1478871915.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:15.892Z,1478871915.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:16.188Z,1478871916.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:16.629Z,1478871916.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:16.688Z,1478871916.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:16.984Z,1478871916.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:17.357Z,1478871917.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:17.485Z,1478871917.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:17.782Z,1478871917.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:17.908Z,1478871917.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:18.197Z,1478871918.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:18.566Z,1478871918.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:18.706Z,1478871918.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:18.991Z,1478871918.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:19.376Z,1478871919.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:19.501Z,1478871919.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:19.799Z,1478871919.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:19.916Z,1478871919.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:20.199Z,1478871920.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:20.576Z,1478871920.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:20.712Z,1478871920.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:20.979Z,1478871920.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:21.380Z,1478871921.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:21.509Z,1478871921.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:21.776Z,1478871921.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:21.920Z,1478871921.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:22.169Z,1478871922.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:22.582Z,1478871922.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:22.716Z,1478871922.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:22.960Z,1478871922.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:23.360Z,1478871923.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:23.512Z,1478871923.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:23.765Z,1478871923.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:23.992Z,1478871923.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:24.169Z,1478871924.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:24.571Z,1478871924.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:24.790Z,1478871924.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:24.971Z,1478871924.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:25.384Z,1478871925.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:25.584Z,1478871925.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:25.786Z,1478871925.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:26.168Z,1478871926.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:26.344Z,1478871926.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:26.572Z,1478871926.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:26.973Z,1478871926.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:27.140Z,1478871927.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:27.367Z,1478871927.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:27.769Z,1478871927.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:27.937Z,1478871927.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:28.166Z,1478871928.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:28.350Z,1478871928.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:28.578Z,1478871928.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:28.979Z,1478871928.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:29.144Z,1478871929.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:29.381Z,1478871929.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:29.771Z,1478871929.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:29.876Z,1478871929.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:30.172Z,1478871930.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:30.613Z,1478871930.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:30.672Z,1478871930.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:30.978Z,1478871930.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:31.364Z,1478871931.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:31.472Z,1478871931.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:31.809Z,1478871931.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:31.892Z,1478871931.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:32.164Z,1478871932.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:32.564Z,1478871932.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:32.688Z,1478871932.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:32.997Z,1478871932.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:33.365Z,1478871933.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:33.485Z,1478871933.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:33.782Z,1478871933.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:33.896Z,1478871933.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:34.221Z,1478871934.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:34.593Z,1478871934.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:34.692Z,1478871934.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:34.980Z,1478871934.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:35.384Z,1478871935.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:35.488Z,1478871935.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:35.776Z,1478871935.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:35.896Z,1478871935.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:36.177Z,1478871936.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:36.577Z,1478871936.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:36.692Z,1478871936.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:36.977Z,1478871936.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:37.369Z,1478871937.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:37.488Z,1478871937.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:37.776Z,1478871937.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:37.976Z,1478871937.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:38.178Z,1478871938.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:38.577Z,1478871938.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:38.772Z,1478871938.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:38.982Z,1478871938.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:39.393Z,1478871939.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:39.568Z,1478871939.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:39.783Z,1478871939.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:40.177Z,1478871940.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:40.320Z,1478871940.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:40.589Z,1478871940.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:40.995Z,1478871940.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:41.116Z,1478871941.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:41.361Z,1478871941.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:41.761Z,1478871941.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:41.913Z,1478871941.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:42.177Z,1478871942.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:42.328Z,1478871942.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:42.589Z,1478871942.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:42.985Z,1478871942.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:43.124Z,1478871943.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:43.362Z,1478871943.362 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T13:45:43.389Z,1478871943.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:43.773Z,1478871943.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:43.866Z,1478871943.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:44.172Z,1478871944.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:44.568Z,1478871944.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:44.660Z,1478871944.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:44.997Z,1478871944.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:45.372Z,1478871945.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:45.457Z,1478871945.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:45.781Z,1478871945.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:45.872Z,1478871945.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:46.221Z,1478871946.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:46.585Z,1478871946.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:46.670Z,1478871946.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:46.965Z,1478871946.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:47.401Z,1478871947.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:47.472Z,1478871947.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:47.776Z,1478871947.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:47.884Z,1478871947.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:48.219Z,1478871948.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:48.576Z,1478871948.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:48.680Z,1478871948.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:49.006Z,1478871949.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:49.378Z,1478871949.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:49.476Z,1478871949.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:49.771Z,1478871949.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:49.884Z,1478871949.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:50.167Z,1478871950.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:50.588Z,1478871950.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:50.680Z,1478871950.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:50.981Z,1478871950.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:51.372Z,1478871951.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:51.476Z,1478871951.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:51.793Z,1478871951.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:51.948Z,1478871951.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:52.169Z,1478871952.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:52.575Z,1478871952.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:52.744Z,1478871952.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:52.980Z,1478871952.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:53.357Z,1478871953.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:53.540Z,1478871953.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:53.780Z,1478871953.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:54.150Z,1478871954.150 [PNI_TCM](ERROR): CRC does not match. Expected:0x2482 got:0x6591
2016-11-11T13:45:54.189Z,1478871954.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:54.300Z,1478871954.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:54.559Z,1478871954.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:54.993Z,1478871954.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:55.096Z,1478871955.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:55.388Z,1478871955.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:55.789Z,1478871955.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:55.893Z,1478871955.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:56.187Z,1478871956.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:56.304Z,1478871956.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:56.559Z,1478871956.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:56.992Z,1478871956.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:57.100Z,1478871957.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:57.366Z,1478871957.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:57.775Z,1478871957.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:57.840Z,1478871957.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:58.169Z,1478871958.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:58.568Z,1478871958.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:58.636Z,1478871958.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:58.968Z,1478871958.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:59.377Z,1478871959.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:59.433Z,1478871959.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:45:59.797Z,1478871959.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:45:59.838Z,1478871959.838 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T13:45:59.844Z,1478871959.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:00.185Z,1478871960.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:00.584Z,1478871960.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:00.640Z,1478871960.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:01.029Z,1478871961.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:01.415Z,1478871961.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:01.437Z,1478871961.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:01.801Z,1478871961.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:01.848Z,1478871961.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:02.173Z,1478871962.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:02.644Z,1478871962.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:03.442Z,1478871963.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:03.852Z,1478871963.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:04.648Z,1478871964.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:05.444Z,1478871965.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:05.852Z,1478871965.852 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:05.852Z,1478871965.852 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 159
2016-11-11T13:46:05.852Z,1478871965.852 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:46:05.859Z,1478871965.859 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:05.859Z,1478871965.859 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 159
2016-11-11T13:46:05.859Z,1478871965.859 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:46:05.861Z,1478871965.861 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:05.861Z,1478871965.861 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 159
2016-11-11T13:46:05.861Z,1478871965.861 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:46:05.877Z,1478871965.877 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:46:05.877Z,1478871965.877 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:46:05.877Z,1478871965.878 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:46:05.920Z,1478871965.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:06.043Z,1478871966.043 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:46:06.043Z,1478871966.043 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 159
2016-11-11T13:46:06.044Z,1478871966.044 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:46:06.044Z,1478871966.044 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 159
2016-11-11T13:46:06.045Z,1478871966.045 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:46:06.045Z,1478871966.045 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 159
2016-11-11T13:46:06.373Z,1478871966.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:46:06.373Z,1478871966.373 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:46:06.374Z,1478871966.374 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:46:06.380Z,1478871966.380 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:46:06.380Z,1478871966.380 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:46:06.380Z,1478871966.380 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:46:06.381Z,1478871966.381 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:46:06.381Z,1478871966.381 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:46:06.382Z,1478871966.382 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:46:06.716Z,1478871966.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:06.758Z,1478871966.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:07.161Z,1478871967.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:07.512Z,1478871967.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:07.555Z,1478871967.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:07.958Z,1478871967.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:08.304Z,1478871968.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:08.330Z,1478871968.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:08.761Z,1478871968.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:09.100Z,1478871969.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:09.136Z,1478871969.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:09.536Z,1478871969.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:09.903Z,1478871969.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:09.958Z,1478871969.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:10.320Z,1478871970.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:10.326Z,1478871970.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:10.737Z,1478871970.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:11.118Z,1478871971.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:11.145Z,1478871971.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:11.549Z,1478871971.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:11.808Z,1478871971.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:11.950Z,1478871971.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:12.349Z,1478871972.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:12.604Z,1478871972.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:12.747Z,1478871972.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:13.153Z,1478871973.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:13.406Z,1478871973.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:13.545Z,1478871973.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:13.836Z,1478871973.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:13.945Z,1478871973.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:14.340Z,1478871974.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:14.632Z,1478871974.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:14.737Z,1478871974.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:15.143Z,1478871975.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:15.428Z,1478871975.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:15.541Z,1478871975.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:15.836Z,1478871975.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:15.941Z,1478871975.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:16.340Z,1478871976.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:16.632Z,1478871976.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:16.741Z,1478871976.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:17.178Z,1478871977.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:17.428Z,1478871977.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:17.550Z,1478871977.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:17.836Z,1478871977.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:17.956Z,1478871977.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:18.349Z,1478871978.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:18.632Z,1478871978.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:18.769Z,1478871978.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:19.129Z,1478871979.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:19.428Z,1478871979.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:19.581Z,1478871979.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:19.932Z,1478871979.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:19.985Z,1478871979.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:20.334Z,1478871980.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:20.728Z,1478871980.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:20.775Z,1478871980.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:21.165Z,1478871981.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:21.524Z,1478871981.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:21.545Z,1478871981.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:21.946Z,1478871981.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:22.248Z,1478871982.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:22.354Z,1478871982.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:22.746Z,1478871982.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:23.044Z,1478871983.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:23.155Z,1478871983.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:23.557Z,1478871983.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:23.841Z,1478871983.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:23.946Z,1478871983.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:24.252Z,1478871984.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:24.324Z,1478871984.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:24.729Z,1478871984.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:25.048Z,1478871985.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:25.129Z,1478871985.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:25.533Z,1478871985.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:25.776Z,1478871985.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:25.937Z,1478871985.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:26.333Z,1478871986.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:26.572Z,1478871986.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:26.732Z,1478871986.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:27.145Z,1478871987.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:27.369Z,1478871987.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:27.541Z,1478871987.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:27.780Z,1478871987.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:27.939Z,1478871987.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:28.342Z,1478871988.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:28.576Z,1478871988.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:28.743Z,1478871988.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:29.135Z,1478871989.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:29.384Z,1478871989.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:29.543Z,1478871989.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:29.804Z,1478871989.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:29.937Z,1478871989.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:30.341Z,1478871990.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:30.600Z,1478871990.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:30.745Z,1478871990.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:31.138Z,1478871991.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:31.396Z,1478871991.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:31.541Z,1478871991.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:31.804Z,1478871991.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:31.972Z,1478871991.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:32.352Z,1478871992.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:32.600Z,1478871992.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:32.746Z,1478871992.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:33.170Z,1478871993.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:33.396Z,1478871993.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:33.556Z,1478871993.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:33.876Z,1478871993.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:33.953Z,1478871993.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:34.325Z,1478871994.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:34.672Z,1478871994.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:34.757Z,1478871994.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:35.132Z,1478871995.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:35.469Z,1478871995.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:35.573Z,1478871995.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:35.977Z,1478871995.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:36.228Z,1478871996.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:36.360Z,1478871996.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:36.734Z,1478871996.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:37.024Z,1478871997.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:37.135Z,1478871997.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:37.553Z,1478871997.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:37.821Z,1478871997.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:37.946Z,1478871997.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:38.232Z,1478871998.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:38.340Z,1478871998.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:38.738Z,1478871998.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:39.028Z,1478871999.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:39.149Z,1478871999.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:39.529Z,1478871999.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:39.756Z,1478871999.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:39.957Z,1478871999.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:40.330Z,1478872000.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:40.552Z,1478872000.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:40.761Z,1478872000.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:41.136Z,1478872001.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:41.349Z,1478872001.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:41.546Z,1478872001.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:41.764Z,1478872001.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:41.934Z,1478872001.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:42.340Z,1478872002.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:42.560Z,1478872002.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:42.737Z,1478872002.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:43.145Z,1478872003.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:43.357Z,1478872003.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:43.549Z,1478872003.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:43.768Z,1478872003.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:43.933Z,1478872003.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:44.333Z,1478872004.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:44.564Z,1478872004.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:44.732Z,1478872004.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:45.132Z,1478872005.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:45.361Z,1478872005.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:45.541Z,1478872005.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:45.772Z,1478872005.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:45.941Z,1478872005.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:46.337Z,1478872006.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:46.568Z,1478872006.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:46.728Z,1478872006.727 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T13:46:46.728Z,1478872006.728 [BPC1] Data Fault, FailCount= 1
2016-11-11T13:46:46.728Z,1478872006.728 [BPC1](ERROR): Data Fault
2016-11-11T13:46:46.754Z,1478872006.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:46.799Z,1478872006.799 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T13:46:47.134Z,1478872007.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:47.366Z,1478872007.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:47.546Z,1478872007.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:47.856Z,1478872007.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:47.944Z,1478872007.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:47.964Z,1478872007.964 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:46:47.964Z,1478872007.964 [BPC1] No Fault, FailCount= 1
2016-11-11T13:46:48.389Z,1478872008.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:48.652Z,1478872008.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:48.754Z,1478872008.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:49.149Z,1478872009.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:49.448Z,1478872009.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:49.557Z,1478872009.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:49.960Z,1478872009.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:50.204Z,1478872010.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:50.349Z,1478872010.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:50.742Z,1478872010.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:50.000Z,1478872011.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:51.133Z,1478872011.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:51.541Z,1478872011.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:51.797Z,1478872011.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:51.970Z,1478872011.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:52.208Z,1478872012.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:52.345Z,1478872012.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:52.739Z,1478872012.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:53.004Z,1478872013.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:53.144Z,1478872013.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:53.535Z,1478872013.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:53.736Z,1478872013.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:53.946Z,1478872013.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:54.389Z,1478872014.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:54.532Z,1478872014.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:54.745Z,1478872014.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:55.141Z,1478872015.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:55.329Z,1478872015.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:55.545Z,1478872015.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:55.740Z,1478872015.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:55.945Z,1478872015.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:56.344Z,1478872016.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:56.536Z,1478872016.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:56.749Z,1478872016.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:57.145Z,1478872017.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:57.333Z,1478872017.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:57.545Z,1478872017.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:57.744Z,1478872017.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:57.951Z,1478872017.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:58.369Z,1478872018.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:58.540Z,1478872018.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:58.748Z,1478872018.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:59.149Z,1478872019.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:59.337Z,1478872019.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:59.557Z,1478872019.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:46:59.748Z,1478872019.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:46:59.947Z,1478872019.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:00.329Z,1478872020.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:00.544Z,1478872020.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:00.732Z,1478872020.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:01.173Z,1478872021.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:01.340Z,1478872021.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:01.537Z,1478872021.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:01.832Z,1478872021.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:01.966Z,1478872021.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:02.342Z,1478872022.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:02.628Z,1478872022.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:03.424Z,1478872023.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:04.220Z,1478872024.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:04.628Z,1478872024.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:05.424Z,1478872025.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:05.720Z,1478872025.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:05.901Z,1478872025.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:06.188Z,1478872026.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:06.261Z,1478872026.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:06.641Z,1478872026.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:06.995Z,1478872026.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:07.040Z,1478872027.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:07.442Z,1478872027.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:07.712Z,1478872027.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:07.837Z,1478872027.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:08.254Z,1478872028.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:08.508Z,1478872028.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:08.654Z,1478872028.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:09.052Z,1478872029.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:09.305Z,1478872029.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:09.449Z,1478872029.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:09.716Z,1478872029.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:09.838Z,1478872029.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:10.232Z,1478872030.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:10.512Z,1478872030.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:10.641Z,1478872030.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:11.037Z,1478872031.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:11.313Z,1478872031.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:11.441Z,1478872031.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:11.732Z,1478872031.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:11.834Z,1478872031.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:12.241Z,1478872032.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:12.528Z,1478872032.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:12.653Z,1478872032.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:13.045Z,1478872033.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:13.325Z,1478872033.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:13.459Z,1478872033.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:13.740Z,1478872033.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:13.833Z,1478872033.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:14.237Z,1478872034.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:14.536Z,1478872034.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:14.637Z,1478872034.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:15.036Z,1478872035.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:15.332Z,1478872035.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:15.477Z,1478872035.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:15.841Z,1478872035.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:15.844Z,1478872035.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:16.225Z,1478872036.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:16.625Z,1478872036.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:16.640Z,1478872036.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:17.033Z,1478872037.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:17.432Z,1478872037.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:17.436Z,1478872037.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:17.861Z,1478872037.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:18.164Z,1478872038.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:18.235Z,1478872038.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:18.697Z,1478872038.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:18.960Z,1478872038.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:19.037Z,1478872039.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:19.462Z,1478872039.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:19.757Z,1478872039.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:19.862Z,1478872039.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:20.208Z,1478872040.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:20.257Z,1478872040.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:20.657Z,1478872040.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:21.004Z,1478872041.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:21.050Z,1478872041.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:21.446Z,1478872041.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:21.692Z,1478872041.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:21.848Z,1478872041.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:22.245Z,1478872042.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:22.488Z,1478872042.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:22.644Z,1478872042.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:23.053Z,1478872043.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:23.287Z,1478872043.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:23.465Z,1478872043.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:23.700Z,1478872043.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:23.834Z,1478872043.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:24.241Z,1478872044.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:24.497Z,1478872044.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:24.629Z,1478872044.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:25.050Z,1478872045.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:25.293Z,1478872045.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:25.473Z,1478872045.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:25.704Z,1478872045.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:25.858Z,1478872045.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:26.254Z,1478872046.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:26.500Z,1478872046.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:26.660Z,1478872046.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:27.071Z,1478872047.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:27.297Z,1478872047.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:27.446Z,1478872047.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:27.708Z,1478872047.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:27.851Z,1478872047.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:28.266Z,1478872048.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:28.504Z,1478872048.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:28.638Z,1478872048.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:29.037Z,1478872049.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:29.300Z,1478872049.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:29.480Z,1478872049.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:29.844Z,1478872049.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:29.855Z,1478872049.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:30.241Z,1478872050.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:30.629Z,1478872050.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:30.640Z,1478872050.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:31.026Z,1478872051.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:31.428Z,1478872051.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:31.436Z,1478872051.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:31.863Z,1478872051.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:32.232Z,1478872052.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:32.257Z,1478872052.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:32.640Z,1478872052.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:32.743Z,1478872052.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:33.038Z,1478872053.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:33.453Z,1478872053.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:33.453Z,1478872053.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:33.879Z,1478872053.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:34.136Z,1478872054.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:34.242Z,1478872054.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:34.685Z,1478872054.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:34.932Z,1478872054.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:35.069Z,1478872055.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:35.449Z,1478872055.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:35.668Z,1478872055.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:35.858Z,1478872055.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:36.240Z,1478872056.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:36.464Z,1478872056.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:36.665Z,1478872056.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:37.047Z,1478872057.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:37.261Z,1478872057.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:37.445Z,1478872057.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:37.672Z,1478872057.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:37.848Z,1478872057.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:38.261Z,1478872058.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:38.468Z,1478872058.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:38.661Z,1478872058.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:39.041Z,1478872059.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:39.265Z,1478872059.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:39.450Z,1478872059.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:39.676Z,1478872059.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:39.854Z,1478872059.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:40.244Z,1478872060.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:40.472Z,1478872060.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:40.642Z,1478872060.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:41.045Z,1478872061.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:41.271Z,1478872061.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:41.444Z,1478872061.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:41.684Z,1478872061.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:41.847Z,1478872061.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:42.241Z,1478872062.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:42.480Z,1478872062.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:42.658Z,1478872062.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:43.054Z,1478872063.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:43.276Z,1478872063.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:43.467Z,1478872063.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:43.768Z,1478872063.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:43.846Z,1478872063.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:44.268Z,1478872064.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:44.564Z,1478872064.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:44.659Z,1478872064.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:45.054Z,1478872065.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:45.360Z,1478872065.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:45.442Z,1478872065.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:45.846Z,1478872065.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:46.124Z,1478872066.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:46.290Z,1478872066.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:46.665Z,1478872066.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:46.920Z,1478872066.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:47.094Z,1478872067.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:47.482Z,1478872067.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:47.717Z,1478872067.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:47.842Z,1478872067.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:48.129Z,1478872068.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:48.257Z,1478872068.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:48.654Z,1478872068.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:48.924Z,1478872068.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:49.089Z,1478872069.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:49.453Z,1478872069.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:49.644Z,1478872069.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:49.857Z,1478872069.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:50.250Z,1478872070.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:50.440Z,1478872070.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:50.657Z,1478872070.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:51.062Z,1478872071.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:51.239Z,1478872071.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:51.458Z,1478872071.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:51.652Z,1478872071.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:51.874Z,1478872071.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:52.249Z,1478872072.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:52.448Z,1478872072.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:52.646Z,1478872072.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:53.036Z,1478872073.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:53.245Z,1478872073.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:53.457Z,1478872073.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:53.656Z,1478872073.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:53.851Z,1478872073.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:54.257Z,1478872074.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:54.452Z,1478872074.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:54.661Z,1478872074.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:55.051Z,1478872075.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:55.249Z,1478872075.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:55.467Z,1478872075.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:55.660Z,1478872075.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:55.832Z,1478872075.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:56.240Z,1478872076.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:56.458Z,1478872076.458 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:56.631Z,1478872076.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:57.033Z,1478872077.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:57.252Z,1478872077.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:57.437Z,1478872077.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:57.744Z,1478872077.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:57.842Z,1478872077.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:58.237Z,1478872078.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:58.540Z,1478872078.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:58.634Z,1478872078.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:59.046Z,1478872079.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:59.336Z,1478872079.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:47:59.451Z,1478872079.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:47:59.840Z,1478872079.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:00.108Z,1478872080.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:00.240Z,1478872080.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:00.638Z,1478872080.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:00.904Z,1478872080.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:01.037Z,1478872081.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:01.047Z,1478872081.047 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T13:43:00.0Z
2016-11-11T13:48:01.047Z,1478872081.047 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T13:48:01.047Z,1478872081.047 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T13:48:01.469Z,1478872081.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:01.701Z,1478872081.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:02.112Z,1478872082.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:02.415Z,1478872082.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:02.545Z,1478872082.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:02.908Z,1478872082.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:03.636Z,1478872083.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:04.432Z,1478872084.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:05.228Z,1478872085.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:05.640Z,1478872085.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:06.171Z,1478872086.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:06.420Z,1478872086.420 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0208.lzma
2016-11-11T13:48:06.436Z,1478872086.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:06.483Z,1478872086.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:06.718Z,1478872086.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:07.033Z,1478872087.033 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0208.lzma.bak
2016-11-11T13:48:07.034Z,1478872087.033 [DataOverHttps](INFO): SBD MOMSN=4555458
2016-11-11T13:48:07.125Z,1478872087.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:07.233Z,1478872087.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:07.644Z,1478872087.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:08.440Z,1478872088.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:08.448Z,1478872088.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:08.573Z,1478872088.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:09.236Z,1478872089.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:09.644Z,1478872089.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:10.440Z,1478872090.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:11.236Z,1478872091.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:11.712Z,1478872091.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:12.102Z,1478872092.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:12.245Z,1478872092.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:12.508Z,1478872092.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:12.589Z,1478872092.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:12.986Z,1478872092.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:13.304Z,1478872093.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:13.384Z,1478872093.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:13.781Z,1478872093.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:14.068Z,1478872094.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:14.864Z,1478872094.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:15.661Z,1478872095.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:16.092Z,1478872096.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:16.888Z,1478872096.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:17.585Z,1478872097.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:17.596Z,1478872097.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:17.641Z,1478872097.641 [DataOverHttps](INFO): Sending 237 bytes from file Logs/20161111T044527/Express0209.lzma
2016-11-11T13:48:17.720Z,1478872097.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:18.085Z,1478872098.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:18.392Z,1478872098.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:18.433Z,1478872098.433 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0209.lzma.bak
2016-11-11T13:48:18.433Z,1478872098.433 [DataOverHttps](INFO): SBD MOMSN=4555460
2016-11-11T13:48:18.500Z,1478872098.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:19.188Z,1478872099.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:19.616Z,1478872099.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:19.844Z,1478872099.844 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T13:48:19.954Z,1478872099.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:19.971Z,1478872099.971 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T13:48:19.971Z,1478872099.971 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T13:48:19.971Z,1478872099.971 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T13:48:20.064Z,1478872100.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:20.412Z,1478872100.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:21.208Z,1478872101.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:21.616Z,1478872101.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:22.412Z,1478872102.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:23.208Z,1478872103.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:23.595Z,1478872103.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:23.616Z,1478872103.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:23.722Z,1478872103.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:24.110Z,1478872104.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:24.412Z,1478872104.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:24.504Z,1478872104.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:24.867Z,1478872104.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:25.208Z,1478872105.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:25.228Z,1478872105.228 [NAL9602](INFO): Powering down
2016-11-11T13:48:25.308Z,1478872105.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:25.687Z,1478872105.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:25.720Z,1478872105.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:26.060Z,1478872106.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:26.465Z,1478872106.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:26.516Z,1478872106.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:26.867Z,1478872106.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:27.264Z,1478872107.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:27.312Z,1478872107.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:27.721Z,1478872107.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:28.073Z,1478872108.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:28.084Z,1478872108.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:28.473Z,1478872108.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:28.871Z,1478872108.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:28.880Z,1478872108.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:29.277Z,1478872109.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:29.676Z,1478872109.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:29.690Z,1478872109.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:30.077Z,1478872110.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:30.084Z,1478872110.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:30.476Z,1478872110.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:30.876Z,1478872110.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:30.880Z,1478872110.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:31.281Z,1478872111.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:31.564Z,1478872111.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:31.677Z,1478872111.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:32.060Z,1478872112.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:32.360Z,1478872112.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:32.493Z,1478872112.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:32.869Z,1478872112.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:33.159Z,1478872113.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:33.271Z,1478872113.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:33.572Z,1478872113.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:33.674Z,1478872113.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:34.073Z,1478872114.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:34.368Z,1478872114.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:34.467Z,1478872114.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:34.870Z,1478872114.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:35.164Z,1478872115.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:35.273Z,1478872115.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:35.576Z,1478872115.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:35.670Z,1478872115.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:36.073Z,1478872116.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:36.373Z,1478872116.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:36.490Z,1478872116.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:36.893Z,1478872116.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:37.168Z,1478872117.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:37.294Z,1478872117.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:37.580Z,1478872117.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:37.680Z,1478872117.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:38.097Z,1478872118.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:38.376Z,1478872118.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:38.480Z,1478872118.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:38.897Z,1478872118.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:39.172Z,1478872119.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:39.338Z,1478872119.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:39.671Z,1478872119.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:39.692Z,1478872119.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:40.072Z,1478872120.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:40.468Z,1478872120.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:40.488Z,1478872120.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:40.876Z,1478872120.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:41.278Z,1478872121.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:41.284Z,1478872121.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:41.708Z,1478872121.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:42.028Z,1478872122.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:42.074Z,1478872122.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:42.467Z,1478872122.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:42.824Z,1478872122.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:42.871Z,1478872122.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:43.277Z,1478872123.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:43.628Z,1478872123.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:43.705Z,1478872123.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:44.070Z,1478872124.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:44.076Z,1478872124.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:44.478Z,1478872124.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:44.872Z,1478872124.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:44.878Z,1478872124.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:45.276Z,1478872125.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:45.540Z,1478872125.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:45.685Z,1478872125.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:46.065Z,1478872126.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:46.336Z,1478872126.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:46.460Z,1478872126.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:46.865Z,1478872126.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:47.133Z,1478872127.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:47.272Z,1478872127.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:47.544Z,1478872127.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:47.667Z,1478872127.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:48.073Z,1478872128.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:48.340Z,1478872128.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:48.477Z,1478872128.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:48.875Z,1478872128.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:49.151Z,1478872129.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:49.277Z,1478872129.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:49.576Z,1478872129.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:49.678Z,1478872129.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:50.070Z,1478872130.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:50.372Z,1478872130.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:50.465Z,1478872130.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:50.864Z,1478872130.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:51.168Z,1478872131.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:51.265Z,1478872131.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:51.576Z,1478872131.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:51.702Z,1478872131.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:52.059Z,1478872132.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:52.372Z,1478872132.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:52.497Z,1478872132.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:52.913Z,1478872132.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:53.168Z,1478872133.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:53.310Z,1478872133.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:53.672Z,1478872133.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:53.697Z,1478872133.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:54.065Z,1478872134.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:54.464Z,1478872134.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:54.468Z,1478872134.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:54.860Z,1478872134.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:55.264Z,1478872135.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:55.264Z,1478872135.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:55.661Z,1478872135.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:56.060Z,1478872136.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:56.065Z,1478872136.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:56.465Z,1478872136.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:56.856Z,1478872136.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:56.864Z,1478872136.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:57.276Z,1478872137.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:57.652Z,1478872137.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:57.665Z,1478872137.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:58.097Z,1478872138.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:58.449Z,1478872138.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:58.465Z,1478872138.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:58.863Z,1478872138.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:59.245Z,1478872139.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:48:59.261Z,1478872139.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:48:59.664Z,1478872139.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:00.042Z,1478872140.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:00.060Z,1478872140.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:00.464Z,1478872140.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:00.836Z,1478872140.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:00.866Z,1478872140.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:01.265Z,1478872141.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:01.632Z,1478872141.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:01.664Z,1478872141.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:02.065Z,1478872142.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:02.428Z,1478872142.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:02.465Z,1478872142.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:02.865Z,1478872142.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:03.224Z,1478872143.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:03.269Z,1478872143.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:03.669Z,1478872143.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:04.029Z,1478872144.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:04.065Z,1478872144.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:04.464Z,1478872144.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:04.824Z,1478872144.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:04.865Z,1478872144.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:05.265Z,1478872145.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:05.628Z,1478872145.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:05.661Z,1478872145.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:06.102Z,1478872146.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:06.424Z,1478872146.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:06.469Z,1478872146.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:06.469Z,1478872146.469 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 160
2016-11-11T13:49:06.469Z,1478872146.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:49:06.476Z,1478872146.476 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:06.476Z,1478872146.476 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 160
2016-11-11T13:49:06.476Z,1478872146.476 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:49:06.478Z,1478872146.478 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:06.478Z,1478872146.478 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 160
2016-11-11T13:49:06.478Z,1478872146.478 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:49:06.492Z,1478872146.492 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:49:06.493Z,1478872146.493 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:49:06.493Z,1478872146.493 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:49:06.914Z,1478872146.914 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:49:06.914Z,1478872146.914 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 160
2016-11-11T13:49:06.914Z,1478872146.914 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:49:06.915Z,1478872146.915 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 160
2016-11-11T13:49:06.915Z,1478872146.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:49:06.915Z,1478872146.915 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 160
2016-11-11T13:49:07.227Z,1478872147.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:07.272Z,1478872147.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:49:07.272Z,1478872147.272 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:49:07.273Z,1478872147.273 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:49:07.278Z,1478872147.277 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:49:07.278Z,1478872147.278 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:49:07.278Z,1478872147.278 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:49:07.279Z,1478872147.279 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:49:07.280Z,1478872147.280 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:49:07.280Z,1478872147.280 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:49:07.697Z,1478872147.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:08.031Z,1478872148.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:08.074Z,1478872148.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:08.444Z,1478872148.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:08.497Z,1478872148.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:08.852Z,1478872148.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:08.876Z,1478872148.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:09.260Z,1478872149.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:09.272Z,1478872149.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:09.668Z,1478872149.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:09.716Z,1478872149.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:10.073Z,1478872150.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:10.076Z,1478872150.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:10.465Z,1478872150.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:10.484Z,1478872150.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:10.867Z,1478872150.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:10.892Z,1478872150.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:11.281Z,1478872151.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:11.300Z,1478872151.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:11.672Z,1478872151.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:11.984Z,1478872151.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:12.073Z,1478872152.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:12.473Z,1478872152.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:12.780Z,1478872152.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:12.881Z,1478872152.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:13.273Z,1478872153.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:13.504Z,1478872153.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:13.673Z,1478872153.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:14.064Z,1478872154.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:14.300Z,1478872154.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:14.476Z,1478872154.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:14.871Z,1478872154.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:15.097Z,1478872155.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:15.268Z,1478872155.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:15.512Z,1478872155.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:15.670Z,1478872155.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:16.075Z,1478872156.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:16.308Z,1478872156.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:16.470Z,1478872156.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:16.881Z,1478872156.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:17.105Z,1478872157.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:17.275Z,1478872157.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:17.516Z,1478872157.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:17.671Z,1478872157.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:18.077Z,1478872158.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:18.312Z,1478872158.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:18.481Z,1478872158.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:18.875Z,1478872158.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:19.109Z,1478872159.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:19.277Z,1478872159.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:19.520Z,1478872159.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:19.684Z,1478872159.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:20.076Z,1478872160.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:20.316Z,1478872160.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:20.517Z,1478872160.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:21.112Z,1478872161.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:21.620Z,1478872161.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:22.417Z,1478872162.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:23.212Z,1478872163.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:23.960Z,1478872163.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:24.033Z,1478872164.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:24.149Z,1478872164.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:24.549Z,1478872164.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:24.756Z,1478872164.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:24.973Z,1478872164.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:25.327Z,1478872165.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:25.567Z,1478872165.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:25.772Z,1478872165.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:25.976Z,1478872165.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:26.173Z,1478872166.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:26.536Z,1478872166.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:26.772Z,1478872166.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:26.933Z,1478872166.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:27.341Z,1478872167.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:27.476Z,1478872167.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:27.732Z,1478872167.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:28.130Z,1478872168.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:28.272Z,1478872168.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:28.538Z,1478872168.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:28.941Z,1478872168.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:29.069Z,1478872169.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:29.340Z,1478872169.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:29.480Z,1478872169.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:29.742Z,1478872169.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:30.133Z,1478872170.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:30.276Z,1478872170.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:30.540Z,1478872170.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:30.942Z,1478872170.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:31.073Z,1478872171.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:31.337Z,1478872171.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:31.484Z,1478872171.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:31.743Z,1478872171.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:32.144Z,1478872172.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:32.280Z,1478872172.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:32.540Z,1478872172.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:32.943Z,1478872172.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:33.077Z,1478872173.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:33.342Z,1478872173.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:33.488Z,1478872173.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:33.744Z,1478872173.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:34.145Z,1478872174.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:34.284Z,1478872174.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:34.528Z,1478872174.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:34.930Z,1478872174.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:35.080Z,1478872175.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:35.341Z,1478872175.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:35.576Z,1478872175.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:35.731Z,1478872175.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:36.132Z,1478872176.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:36.372Z,1478872176.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:36.535Z,1478872176.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:36.941Z,1478872176.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:37.168Z,1478872177.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:37.333Z,1478872177.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:37.737Z,1478872177.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:37.928Z,1478872177.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:38.162Z,1478872178.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:38.542Z,1478872178.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:38.725Z,1478872178.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:38.951Z,1478872178.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:39.344Z,1478872179.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:39.521Z,1478872179.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:39.736Z,1478872179.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:39.940Z,1478872179.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:40.150Z,1478872180.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:40.529Z,1478872180.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:40.927Z,1478872180.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:41.323Z,1478872181.323 [BPC1](ERROR): Failed to receive battery data
2016-11-11T13:49:41.324Z,1478872181.324 [BPC1] Communications Fault, FailCount= 1
2016-11-11T13:49:41.324Z,1478872181.324 [BPC1](ERROR): Communications Fault
2016-11-11T13:49:41.337Z,1478872181.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:41.389Z,1478872181.389 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T13:49:41.735Z,1478872181.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:42.131Z,1478872182.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:42.248Z,1478872182.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:42.537Z,1478872182.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:42.558Z,1478872182.558 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:49:42.558Z,1478872182.558 [BPC1] No Fault, FailCount= 1
2016-11-11T13:49:42.997Z,1478872182.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:43.045Z,1478872183.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:43.357Z,1478872183.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:43.456Z,1478872183.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:43.729Z,1478872183.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:44.129Z,1478872184.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:44.252Z,1478872184.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:44.531Z,1478872184.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:44.962Z,1478872184.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:45.049Z,1478872185.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:45.345Z,1478872185.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:45.464Z,1478872185.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:45.740Z,1478872185.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:46.146Z,1478872186.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:46.260Z,1478872186.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:46.544Z,1478872186.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:46.924Z,1478872186.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:47.057Z,1478872187.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:47.329Z,1478872187.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:47.468Z,1478872187.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:47.728Z,1478872187.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:48.128Z,1478872188.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:48.264Z,1478872188.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:48.533Z,1478872188.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:48.935Z,1478872188.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:49.060Z,1478872189.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:49.332Z,1478872189.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:49.576Z,1478872189.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:49.735Z,1478872189.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:50.136Z,1478872190.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:50.372Z,1478872190.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:50.533Z,1478872190.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:50.942Z,1478872190.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:51.168Z,1478872191.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:51.354Z,1478872191.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:51.761Z,1478872191.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:51.904Z,1478872191.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:52.140Z,1478872192.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:52.542Z,1478872192.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:52.700Z,1478872192.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:52.942Z,1478872192.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:53.343Z,1478872193.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:53.497Z,1478872193.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:53.761Z,1478872193.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:53.908Z,1478872193.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:49:54.146Z,1478872194.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:54.530Z,1478872194.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:54.951Z,1478872194.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:55.370Z,1478872195.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:55.734Z,1478872195.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:56.139Z,1478872196.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:56.553Z,1478872196.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:56.944Z,1478872196.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:57.353Z,1478872197.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:57.739Z,1478872197.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:58.129Z,1478872198.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:58.522Z,1478872198.523 [BPC1](ERROR): Failed to receive battery data
2016-11-11T13:49:58.523Z,1478872198.523 [BPC1] Communications Fault, FailCount= 2
2016-11-11T13:49:58.523Z,1478872198.523 [BPC1](ERROR): Communications Fault
2016-11-11T13:49:58.551Z,1478872198.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:58.588Z,1478872198.588 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T13:49:58.935Z,1478872198.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:59.344Z,1478872199.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:59.751Z,1478872199.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:49:59.791Z,1478872199.791 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:49:59.791Z,1478872199.791 [BPC1] No Fault, FailCount= 2
2016-11-11T13:50:00.193Z,1478872200.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:00.558Z,1478872200.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:00.941Z,1478872200.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:01.348Z,1478872201.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:01.739Z,1478872201.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:02.136Z,1478872202.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:02.537Z,1478872202.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:02.949Z,1478872202.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:03.345Z,1478872203.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:03.738Z,1478872203.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:04.145Z,1478872204.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:04.549Z,1478872204.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:04.927Z,1478872204.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:05.331Z,1478872205.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:05.726Z,1478872205.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:06.152Z,1478872206.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:06.531Z,1478872206.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:06.932Z,1478872206.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:07.345Z,1478872207.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:07.741Z,1478872207.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:08.137Z,1478872208.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:08.562Z,1478872208.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:08.947Z,1478872208.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:09.351Z,1478872209.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:09.752Z,1478872209.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:10.134Z,1478872210.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:10.533Z,1478872210.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:10.960Z,1478872210.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:11.325Z,1478872211.325 [PNI_TCM](ERROR): CRC does not match. Expected:0x49366 got:0x49149
2016-11-11T13:50:11.377Z,1478872211.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:11.755Z,1478872211.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:12.141Z,1478872212.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:12.575Z,1478872212.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:12.949Z,1478872212.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:13.365Z,1478872213.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:13.762Z,1478872213.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:14.151Z,1478872214.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:14.236Z,1478872214.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:14.527Z,1478872214.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:14.933Z,1478872214.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:15.032Z,1478872215.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:15.341Z,1478872215.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:15.440Z,1478872215.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:15.749Z,1478872215.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:16.126Z,1478872216.126 [PNI_TCM](ERROR): CRC does not match. Expected:0x56771 got:0x173
2016-11-11T13:50:16.146Z,1478872216.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:16.236Z,1478872216.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:16.544Z,1478872216.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:16.937Z,1478872216.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:17.032Z,1478872217.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:17.343Z,1478872217.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:17.504Z,1478872217.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:17.735Z,1478872217.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:18.137Z,1478872218.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:18.300Z,1478872218.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:18.536Z,1478872218.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:18.937Z,1478872218.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:19.096Z,1478872219.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:19.338Z,1478872219.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:19.741Z,1478872219.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:20.137Z,1478872220.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:20.537Z,1478872220.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:23.994Z,1478872223.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:24.126Z,1478872224.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:24.188Z,1478872224.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:24.525Z,1478872224.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:24.890Z,1478872224.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:24.985Z,1478872224.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:25.317Z,1478872225.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:25.396Z,1478872225.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:25.761Z,1478872225.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:26.094Z,1478872226.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:26.192Z,1478872226.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:26.521Z,1478872226.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:26.908Z,1478872226.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:26.989Z,1478872226.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:27.329Z,1478872227.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:27.400Z,1478872227.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:27.727Z,1478872227.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:28.093Z,1478872228.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:28.196Z,1478872228.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:28.521Z,1478872228.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:28.896Z,1478872228.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:28.993Z,1478872228.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:29.302Z,1478872229.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:29.404Z,1478872229.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:29.696Z,1478872229.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:30.113Z,1478872230.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:30.200Z,1478872230.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:30.504Z,1478872230.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:30.894Z,1478872230.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:30.996Z,1478872230.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:31.307Z,1478872231.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:31.504Z,1478872231.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:31.702Z,1478872231.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:32.107Z,1478872232.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:32.300Z,1478872232.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:32.510Z,1478872232.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:32.921Z,1478872232.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:33.096Z,1478872233.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:33.314Z,1478872233.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:33.700Z,1478872233.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:33.840Z,1478872233.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:34.096Z,1478872234.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:34.487Z,1478872234.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:34.636Z,1478872234.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:34.912Z,1478872234.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:35.289Z,1478872235.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:35.433Z,1478872235.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:35.686Z,1478872235.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:35.844Z,1478872235.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:36.095Z,1478872236.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:36.522Z,1478872236.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:36.640Z,1478872236.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:36.898Z,1478872236.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:37.286Z,1478872237.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:37.380Z,1478872237.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:37.689Z,1478872237.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:38.112Z,1478872238.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:38.176Z,1478872238.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:38.522Z,1478872238.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:38.922Z,1478872238.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:38.973Z,1478872238.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:39.296Z,1478872239.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:39.384Z,1478872239.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:39.709Z,1478872239.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:40.086Z,1478872240.086 [PNI_TCM](ERROR): CRC does not match. Expected:0x62119 got:0x36381
2016-11-11T13:50:40.153Z,1478872240.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:40.180Z,1478872240.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:40.504Z,1478872240.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:40.958Z,1478872240.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:40.977Z,1478872240.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:41.310Z,1478872241.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:41.388Z,1478872241.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:41.678Z,1478872241.678 [PNI_TCM](ERROR): CRC does not match. Expected:0x34831 got:0x29937
2016-11-11T13:50:41.741Z,1478872241.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:42.115Z,1478872242.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:42.184Z,1478872242.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:42.511Z,1478872242.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:42.913Z,1478872242.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:42.981Z,1478872242.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:43.283Z,1478872243.283 [PNI_TCM](ERROR): CRC does not match. Expected:0x34245 got:0x24949
2016-11-11T13:50:43.316Z,1478872243.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:43.392Z,1478872243.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:43.701Z,1478872243.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:44.101Z,1478872244.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:44.188Z,1478872244.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:44.494Z,1478872244.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:44.905Z,1478872244.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:44.984Z,1478872244.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:45.298Z,1478872245.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:45.464Z,1478872245.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:45.697Z,1478872245.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:46.101Z,1478872246.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:46.260Z,1478872246.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:46.477Z,1478872246.477 [PNI_TCM](ERROR): CRC does not match. Expected:0x57399 got:0x16870
2016-11-11T13:50:46.501Z,1478872246.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:46.897Z,1478872246.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:47.056Z,1478872247.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:47.304Z,1478872247.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:47.706Z,1478872247.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:47.820Z,1478872247.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:48.094Z,1478872248.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:48.499Z,1478872248.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:48.617Z,1478872248.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:48.889Z,1478872248.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:49.290Z,1478872249.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:49.413Z,1478872249.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:49.695Z,1478872249.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:49.824Z,1478872249.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:50.093Z,1478872250.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:50.491Z,1478872250.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:50.620Z,1478872250.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:50.901Z,1478872250.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:51.297Z,1478872251.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:51.360Z,1478872251.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:51.695Z,1478872251.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:52.098Z,1478872252.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:52.156Z,1478872252.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:52.518Z,1478872252.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:52.941Z,1478872252.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:52.952Z,1478872252.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:53.305Z,1478872253.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:53.364Z,1478872253.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:53.704Z,1478872253.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:54.101Z,1478872254.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:54.160Z,1478872254.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:54.533Z,1478872254.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:54.897Z,1478872254.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:54.957Z,1478872254.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:55.294Z,1478872255.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:55.368Z,1478872255.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:55.722Z,1478872255.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:56.105Z,1478872256.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:56.164Z,1478872256.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:56.518Z,1478872256.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:56.960Z,1478872256.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:56.970Z,1478872256.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:57.308Z,1478872257.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:57.372Z,1478872257.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:57.709Z,1478872257.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:58.112Z,1478872258.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:58.168Z,1478872258.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:58.487Z,1478872258.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:58.891Z,1478872258.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:58.964Z,1478872258.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:59.289Z,1478872259.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:50:59.440Z,1478872259.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:50:59.691Z,1478872259.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:00.090Z,1478872260.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:00.236Z,1478872260.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:00.494Z,1478872260.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:00.897Z,1478872260.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:01.032Z,1478872261.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:01.292Z,1478872261.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:01.700Z,1478872261.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:01.808Z,1478872261.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:02.104Z,1478872262.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:02.500Z,1478872262.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:02.604Z,1478872262.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:02.901Z,1478872262.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:03.297Z,1478872263.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:03.400Z,1478872263.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:03.696Z,1478872263.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:03.812Z,1478872263.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:04.092Z,1478872264.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:04.497Z,1478872264.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:04.608Z,1478872264.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:04.952Z,1478872264.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:05.291Z,1478872265.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:05.348Z,1478872265.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:05.701Z,1478872265.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:06.100Z,1478872266.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:06.144Z,1478872266.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:06.505Z,1478872266.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:06.940Z,1478872266.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:06.973Z,1478872266.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:07.325Z,1478872267.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:07.356Z,1478872267.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:07.697Z,1478872267.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:08.101Z,1478872268.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:08.152Z,1478872268.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:08.495Z,1478872268.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:08.945Z,1478872268.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:08.948Z,1478872268.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:09.329Z,1478872269.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:09.356Z,1478872269.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:09.692Z,1478872269.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:10.127Z,1478872270.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:10.152Z,1478872270.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:10.497Z,1478872270.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:10.948Z,1478872270.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:10.982Z,1478872270.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:11.337Z,1478872271.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:11.356Z,1478872271.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:11.702Z,1478872271.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:12.094Z,1478872272.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:12.152Z,1478872272.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:12.502Z,1478872272.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:12.902Z,1478872272.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:12.948Z,1478872272.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:13.289Z,1478872273.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:13.408Z,1478872273.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:13.717Z,1478872273.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:14.097Z,1478872274.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:14.204Z,1478872274.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:14.491Z,1478872274.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:14.890Z,1478872274.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:14.000Z,1478872275.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:15.297Z,1478872275.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:15.703Z,1478872275.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:15.768Z,1478872275.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:16.103Z,1478872276.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:16.504Z,1478872276.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:16.564Z,1478872276.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:16.896Z,1478872276.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:17.310Z,1478872277.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:17.360Z,1478872277.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:17.697Z,1478872277.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:17.772Z,1478872277.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:18.090Z,1478872278.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:18.491Z,1478872278.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:18.568Z,1478872278.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:18.946Z,1478872278.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:19.301Z,1478872279.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:19.336Z,1478872279.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:19.701Z,1478872279.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:20.094Z,1478872280.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:20.132Z,1478872280.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:20.497Z,1478872280.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:20.934Z,1478872280.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:20.961Z,1478872280.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:21.344Z,1478872281.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:22.140Z,1478872282.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:22.936Z,1478872282.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:23.344Z,1478872283.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:24.140Z,1478872284.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:24.325Z,1478872284.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:24.453Z,1478872284.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:24.894Z,1478872284.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:24.936Z,1478872284.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:25.233Z,1478872285.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:25.344Z,1478872285.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:25.641Z,1478872285.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:26.049Z,1478872286.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:26.140Z,1478872286.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:26.411Z,1478872286.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:26.814Z,1478872286.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:26.936Z,1478872286.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:27.241Z,1478872287.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:27.396Z,1478872287.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:27.633Z,1478872287.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:28.011Z,1478872288.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:28.192Z,1478872288.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:28.414Z,1478872288.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:28.822Z,1478872288.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:28.988Z,1478872288.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:29.229Z,1478872289.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:29.614Z,1478872289.614 [PNI_TCM](ERROR): CRC does not match. Expected:0x17692 got:0x48992
2016-11-11T13:51:29.650Z,1478872289.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:29.748Z,1478872289.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:30.022Z,1478872290.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:30.422Z,1478872290.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:30.544Z,1478872290.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:30.821Z,1478872290.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:31.224Z,1478872291.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:31.340Z,1478872291.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:31.610Z,1478872291.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:31.752Z,1478872291.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:32.016Z,1478872292.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:32.421Z,1478872292.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:32.548Z,1478872292.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:32.829Z,1478872292.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:33.225Z,1478872293.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:33.276Z,1478872293.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:33.633Z,1478872293.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:34.023Z,1478872294.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:34.072Z,1478872294.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:34.414Z,1478872294.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:34.826Z,1478872294.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:34.868Z,1478872294.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:35.242Z,1478872295.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:35.292Z,1478872295.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:35.618Z,1478872295.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:36.022Z,1478872296.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:36.088Z,1478872296.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:36.414Z,1478872296.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:36.869Z,1478872296.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:36.885Z,1478872296.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:37.237Z,1478872297.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:37.300Z,1478872297.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:37.606Z,1478872297.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:38.013Z,1478872298.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:38.096Z,1478872298.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:38.453Z,1478872298.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:38.868Z,1478872298.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:38.892Z,1478872298.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:39.237Z,1478872299.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:39.300Z,1478872299.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:39.629Z,1478872299.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:40.039Z,1478872300.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:40.096Z,1478872300.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:40.449Z,1478872300.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:40.839Z,1478872300.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:40.892Z,1478872300.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:41.225Z,1478872301.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:41.364Z,1478872301.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:41.608Z,1478872301.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:42.012Z,1478872302.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:42.160Z,1478872302.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:42.413Z,1478872302.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:42.811Z,1478872302.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:42.956Z,1478872302.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:43.230Z,1478872303.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:43.625Z,1478872303.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:43.736Z,1478872303.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:44.023Z,1478872304.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:44.421Z,1478872304.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:44.532Z,1478872304.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:44.820Z,1478872304.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:45.224Z,1478872305.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:45.329Z,1478872305.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:45.624Z,1478872305.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:45.740Z,1478872305.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:46.020Z,1478872306.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:46.422Z,1478872306.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:46.870Z,1478872306.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:47.216Z,1478872307.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:47.612Z,1478872307.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:48.022Z,1478872308.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:48.421Z,1478872308.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:48.891Z,1478872308.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:49.225Z,1478872309.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:49.620Z,1478872309.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:50.017Z,1478872310.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:50.424Z,1478872310.424 [BPC1](ERROR): Failed to parse message.
2016-11-11T13:51:50.424Z,1478872310.424 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T13:51:50.424Z,1478872310.424 [BPC1] Data Fault, FailCount= 1
2016-11-11T13:51:50.424Z,1478872310.424 [BPC1](ERROR): Data Fault
2016-11-11T13:51:50.444Z,1478872310.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:50.524Z,1478872310.523 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T13:51:50.882Z,1478872310.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:51.241Z,1478872311.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:51.611Z,1478872311.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:51.651Z,1478872311.651 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:51:51.651Z,1478872311.651 [BPC1] No Fault, FailCount= 1
2016-11-11T13:51:52.111Z,1478872312.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:52.417Z,1478872312.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:52.874Z,1478872312.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:53.220Z,1478872313.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:53.621Z,1478872313.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:54.014Z,1478872314.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:54.416Z,1478872314.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:54.821Z,1478872314.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:55.220Z,1478872315.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:55.622Z,1478872315.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:56.022Z,1478872316.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:56.140Z,1478872316.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:56.422Z,1478872316.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:56.829Z,1478872316.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:56.936Z,1478872316.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:57.220Z,1478872317.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:57.642Z,1478872317.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:57.708Z,1478872317.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:58.008Z,1478872318.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:58.411Z,1478872318.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:58.504Z,1478872318.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:58.811Z,1478872318.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:59.211Z,1478872319.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:59.301Z,1478872319.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:51:59.620Z,1478872319.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:51:59.712Z,1478872319.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:00.021Z,1478872320.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:00.420Z,1478872320.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:00.871Z,1478872320.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:01.209Z,1478872321.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:01.609Z,1478872321.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:02.013Z,1478872322.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:02.411Z,1478872322.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:02.878Z,1478872322.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:03.224Z,1478872323.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:03.654Z,1478872323.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:04.020Z,1478872324.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:04.423Z,1478872324.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:04.870Z,1478872324.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:05.242Z,1478872325.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:05.617Z,1478872325.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:06.042Z,1478872326.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:06.417Z,1478872326.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:06.897Z,1478872326.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:07.243Z,1478872327.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:07.638Z,1478872327.638 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:07.638Z,1478872327.638 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 161
2016-11-11T13:52:07.638Z,1478872327.638 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:52:07.645Z,1478872327.645 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:07.645Z,1478872327.645 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 161
2016-11-11T13:52:07.645Z,1478872327.645 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:52:07.647Z,1478872327.647 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:07.647Z,1478872327.647 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 161
2016-11-11T13:52:07.647Z,1478872327.647 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:52:07.662Z,1478872327.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:52:07.662Z,1478872327.662 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:52:07.662Z,1478872327.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:52:08.060Z,1478872328.060 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:52:08.060Z,1478872328.060 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 161
2016-11-11T13:52:08.061Z,1478872328.061 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:52:08.061Z,1478872328.061 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 161
2016-11-11T13:52:08.062Z,1478872328.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:52:08.062Z,1478872328.062 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 161
2016-11-11T13:52:08.420Z,1478872328.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:52:08.420Z,1478872328.420 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:52:08.421Z,1478872328.421 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:52:08.430Z,1478872328.430 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:52:08.430Z,1478872328.430 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:52:08.431Z,1478872328.431 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:52:08.435Z,1478872328.435 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:52:08.436Z,1478872328.436 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:52:08.436Z,1478872328.436 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:52:08.857Z,1478872328.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:09.223Z,1478872329.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:09.625Z,1478872329.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:10.020Z,1478872330.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:10.120Z,1478872330.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:10.421Z,1478872330.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:10.829Z,1478872330.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:10.916Z,1478872330.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:11.220Z,1478872331.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:11.617Z,1478872331.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:11.696Z,1478872331.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:12.019Z,1478872332.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:12.413Z,1478872332.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:12.492Z,1478872332.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:12.817Z,1478872332.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:13.217Z,1478872333.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:13.289Z,1478872333.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:13.624Z,1478872333.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:13.700Z,1478872333.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:14.023Z,1478872334.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:14.417Z,1478872334.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:14.894Z,1478872334.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:15.211Z,1478872335.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:15.612Z,1478872335.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:16.017Z,1478872336.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:16.417Z,1478872336.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:16.887Z,1478872336.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:17.221Z,1478872337.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:17.618Z,1478872337.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:18.014Z,1478872338.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:18.421Z,1478872338.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:18.887Z,1478872338.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:19.266Z,1478872339.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:19.678Z,1478872339.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:20.033Z,1478872340.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:20.449Z,1478872340.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:20.906Z,1478872340.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:21.261Z,1478872341.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:24.116Z,1478872344.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:24.912Z,1478872344.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:28.608Z,1478872348.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:28.733Z,1478872348.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:29.106Z,1478872349.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:29.491Z,1478872349.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:29.918Z,1478872349.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:30.280Z,1478872350.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:30.679Z,1478872350.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:31.106Z,1478872351.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:31.480Z,1478872351.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:31.879Z,1478872351.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:32.280Z,1478872352.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:32.697Z,1478872352.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:33.092Z,1478872353.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:33.472Z,1478872353.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:33.898Z,1478872353.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:34.328Z,1478872354.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:34.734Z,1478872354.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:35.097Z,1478872355.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:35.509Z,1478872355.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:35.914Z,1478872355.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:36.290Z,1478872356.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:36.719Z,1478872356.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:37.136Z,1478872357.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:37.536Z,1478872357.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:37.916Z,1478872357.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:38.088Z,1478872358.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:38.297Z,1478872358.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:38.693Z,1478872358.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:38.885Z,1478872358.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:39.107Z,1478872359.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:39.507Z,1478872359.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:39.912Z,1478872359.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:40.393Z,1478872360.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:40.705Z,1478872360.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:41.107Z,1478872361.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:41.521Z,1478872361.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:41.906Z,1478872361.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:42.322Z,1478872362.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:42.722Z,1478872362.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:43.113Z,1478872363.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:43.516Z,1478872363.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:43.923Z,1478872363.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:44.308Z,1478872364.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:44.706Z,1478872364.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:45.095Z,1478872365.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:45.498Z,1478872365.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:45.897Z,1478872365.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:46.302Z,1478872366.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:46.683Z,1478872366.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:47.090Z,1478872367.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:47.497Z,1478872367.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:47.872Z,1478872367.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:47.996Z,1478872367.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:48.290Z,1478872368.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:48.678Z,1478872368.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:48.792Z,1478872368.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:49.089Z,1478872369.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:49.200Z,1478872369.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:49.479Z,1478872369.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:49.878Z,1478872369.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:49.996Z,1478872369.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:50.277Z,1478872370.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:50.693Z,1478872370.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:50.792Z,1478872370.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:51.076Z,1478872371.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:51.264Z,1478872371.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:51.478Z,1478872371.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:51.874Z,1478872371.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:52.060Z,1478872372.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:52.293Z,1478872372.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:52.675Z,1478872372.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:52.856Z,1478872372.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:53.078Z,1478872373.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:53.474Z,1478872373.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:53.612Z,1478872373.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:53.889Z,1478872373.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:54.275Z,1478872374.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:54.408Z,1478872374.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:54.725Z,1478872374.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:55.076Z,1478872375.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:55.205Z,1478872375.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:55.513Z,1478872375.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:55.620Z,1478872375.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:55.878Z,1478872375.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:56.305Z,1478872376.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:56.416Z,1478872376.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:56.676Z,1478872376.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:57.113Z,1478872377.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:57.140Z,1478872377.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:57.473Z,1478872377.473 [PNI_TCM](ERROR): CRC does not match. Expected:0x47596 got:0x11547
2016-11-11T13:52:57.501Z,1478872377.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:57.874Z,1478872377.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:57.936Z,1478872377.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:58.281Z,1478872378.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:58.683Z,1478872378.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:58.733Z,1478872378.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:59.089Z,1478872379.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:59.148Z,1478872379.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:52:59.476Z,1478872379.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:59.876Z,1478872379.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:52:59.944Z,1478872379.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:00.277Z,1478872380.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:00.678Z,1478872380.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:00.741Z,1478872380.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:01.076Z,1478872381.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:01.160Z,1478872381.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:01.477Z,1478872381.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:01.885Z,1478872381.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:01.956Z,1478872381.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:02.274Z,1478872382.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:02.675Z,1478872382.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:02.753Z,1478872382.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:03.076Z,1478872383.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:03.164Z,1478872383.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:03.478Z,1478872383.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:03.885Z,1478872383.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:03.960Z,1478872383.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:04.281Z,1478872384.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:04.681Z,1478872384.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:04.756Z,1478872384.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:05.078Z,1478872385.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:05.236Z,1478872385.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:05.478Z,1478872385.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:05.876Z,1478872385.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:06.032Z,1478872386.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:06.281Z,1478872386.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:06.679Z,1478872386.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:06.828Z,1478872386.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:07.081Z,1478872387.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:07.477Z,1478872387.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:07.592Z,1478872387.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:07.881Z,1478872387.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:08.275Z,1478872388.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:08.388Z,1478872388.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:08.676Z,1478872388.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:09.185Z,1478872389.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:09.247Z,1478872389.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:09.480Z,1478872389.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:09.596Z,1478872389.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:09.901Z,1478872389.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:10.286Z,1478872390.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:10.392Z,1478872390.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:10.749Z,1478872390.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:11.085Z,1478872391.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:11.136Z,1478872391.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:11.501Z,1478872391.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:11.881Z,1478872391.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:11.932Z,1478872391.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:12.285Z,1478872392.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:12.729Z,1478872392.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:12.752Z,1478872392.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:13.082Z,1478872393.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:13.140Z,1478872393.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:13.485Z,1478872393.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:13.905Z,1478872393.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:13.936Z,1478872393.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:14.288Z,1478872394.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:14.732Z,1478872394.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:14.758Z,1478872394.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:15.093Z,1478872395.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:15.144Z,1478872395.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:15.472Z,1478872395.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:15.917Z,1478872395.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:15.940Z,1478872395.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:16.282Z,1478872396.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:16.736Z,1478872396.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:16.751Z,1478872396.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:17.085Z,1478872397.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:17.144Z,1478872397.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:17.489Z,1478872397.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:17.888Z,1478872397.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:17.940Z,1478872397.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:18.292Z,1478872398.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:18.693Z,1478872398.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:18.736Z,1478872398.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:19.088Z,1478872399.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:19.212Z,1478872399.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:19.489Z,1478872399.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:19.893Z,1478872399.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:20.008Z,1478872400.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:20.272Z,1478872400.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:20.297Z,1478872400.297 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T13:53:20.297Z,1478872400.297 [Default:CheckIn:C.Wait] Stopped
2016-11-11T13:53:20.297Z,1478872400.297 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T13:53:20.297Z,1478872400.297 [Default:CheckIn:D] Running Loop=1
2016-11-11T13:53:20.677Z,1478872400.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:20.706Z,1478872400.706 [Default:CheckIn:D] Stopped
2016-11-11T13:53:20.706Z,1478872400.706 [Default:CheckIn:E] Running Loop=1
2016-11-11T13:53:20.804Z,1478872400.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:21.078Z,1478872401.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:21.102Z,1478872401.102 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 543.323275 min 
2016-11-11T13:53:21.103Z,1478872401.103 [Default:CheckIn:E] Stopped
2016-11-11T13:53:21.107Z,1478872401.107 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T13:53:21.107Z,1478872401.107 [Default:CheckIn] Stopped
2016-11-11T13:53:21.107Z,1478872401.107 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T13:53:21.108Z,1478872401.108 [Default:CheckIn](INFO): Running loop #53
2016-11-11T13:53:21.108Z,1478872401.108 [Default:CheckIn] Running Loop=53
2016-11-11T13:53:21.108Z,1478872401.108 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T13:53:21.108Z,1478872401.108 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T13:53:21.489Z,1478872401.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:21.580Z,1478872401.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:22.376Z,1478872402.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:23.173Z,1478872403.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:23.584Z,1478872403.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:24.380Z,1478872404.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:24.876Z,1478872404.876 [NAL9602](INFO): Powering up
2016-11-11T13:53:24.969Z,1478872404.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:25.108Z,1478872405.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:25.110Z,1478872405.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:25.486Z,1478872405.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:25.877Z,1478872405.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:25.904Z,1478872405.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:26.306Z,1478872406.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:26.701Z,1478872406.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:26.769Z,1478872406.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:27.112Z,1478872407.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:27.137Z,1478872407.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:27.480Z,1478872407.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:27.880Z,1478872407.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:27.940Z,1478872407.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:28.284Z,1478872408.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:28.710Z,1478872408.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:28.736Z,1478872408.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:29.067Z,1478872409.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:29.144Z,1478872409.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:29.463Z,1478872409.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:29.869Z,1478872409.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:29.940Z,1478872409.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:30.271Z,1478872410.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:30.736Z,1478872410.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:30.744Z,1478872410.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:31.115Z,1478872411.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:31.144Z,1478872411.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:31.483Z,1478872411.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:31.884Z,1478872411.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:31.940Z,1478872411.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:32.277Z,1478872412.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:32.709Z,1478872412.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:32.736Z,1478872412.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:33.071Z,1478872413.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:33.200Z,1478872413.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:33.465Z,1478872413.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:33.868Z,1478872413.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:33.996Z,1478872413.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:34.275Z,1478872414.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:34.668Z,1478872414.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:34.793Z,1478872414.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:35.069Z,1478872415.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:35.483Z,1478872415.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:35.556Z,1478872415.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:35.829Z,1478872415.829 [NAL9602](INFO): NAL9602 initialized
2016-11-11T13:53:35.861Z,1478872415.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:36.269Z,1478872416.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:36.352Z,1478872416.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:36.629Z,1478872416.629 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T13:53:36.629Z,1478872416.629 [NAL9602] Data Fault, FailCount= 2
2016-11-11T13:53:36.629Z,1478872416.629 [NAL9602](ERROR): Data Fault
2016-11-11T13:53:36.661Z,1478872416.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:36.706Z,1478872416.706 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T13:53:37.025Z,1478872417.025 [NAL9602](INFO): Powering down
2016-11-11T13:53:37.068Z,1478872417.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:37.148Z,1478872417.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:37.476Z,1478872417.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:37.560Z,1478872417.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:37.873Z,1478872417.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:37.892Z,1478872417.892 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T13:53:37.892Z,1478872417.892 [NAL9602] No Fault, FailCount= 2
2016-11-11T13:53:38.277Z,1478872418.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:38.357Z,1478872418.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:38.777Z,1478872418.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:39.065Z,1478872419.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:39.108Z,1478872419.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:39.505Z,1478872419.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:39.865Z,1478872419.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:39.904Z,1478872419.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:40.289Z,1478872420.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:40.700Z,1478872420.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:40.726Z,1478872420.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:41.073Z,1478872421.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:41.108Z,1478872421.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:41.482Z,1478872421.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:41.865Z,1478872421.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:41.904Z,1478872421.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:42.225Z,1478872422.224 [NAL9602](INFO): Powering up NAL9602
2016-11-11T13:53:42.280Z,1478872422.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:42.700Z,1478872422.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:42.735Z,1478872422.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:43.081Z,1478872423.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:43.108Z,1478872423.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:43.489Z,1478872423.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:43.904Z,1478872423.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:43.910Z,1478872423.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:44.285Z,1478872424.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:44.700Z,1478872424.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:44.743Z,1478872424.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:45.081Z,1478872425.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:45.108Z,1478872425.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:45.480Z,1478872425.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:45.884Z,1478872425.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:45.904Z,1478872425.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:46.284Z,1478872426.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:46.677Z,1478872426.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:46.700Z,1478872426.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:47.088Z,1478872427.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:47.180Z,1478872427.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:47.488Z,1478872427.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:47.895Z,1478872427.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:47.976Z,1478872427.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:48.265Z,1478872428.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:48.685Z,1478872428.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:48.772Z,1478872428.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:49.086Z,1478872429.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:49.528Z,1478872429.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:49.556Z,1478872429.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:49.877Z,1478872429.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:50.272Z,1478872430.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:50.352Z,1478872430.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:50.672Z,1478872430.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:51.073Z,1478872431.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:51.149Z,1478872431.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:51.480Z,1478872431.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:51.561Z,1478872431.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:51.881Z,1478872431.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:52.261Z,1478872432.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:52.356Z,1478872432.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:52.770Z,1478872432.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:53.093Z,1478872433.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:53.100Z,1478872433.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:53.433Z,1478872433.433 [NAL9602](INFO): NAL9602 initialized
2016-11-11T13:53:53.498Z,1478872433.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:53.868Z,1478872433.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:53.896Z,1478872433.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:54.305Z,1478872434.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:54.692Z,1478872434.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:54.714Z,1478872434.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:55.100Z,1478872435.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:55.106Z,1478872435.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:55.466Z,1478872435.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:55.868Z,1478872435.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:55.896Z,1478872435.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:56.266Z,1478872436.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:56.700Z,1478872436.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:56.715Z,1478872436.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:57.082Z,1478872437.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:57.108Z,1478872437.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:57.485Z,1478872437.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:57.877Z,1478872437.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:57.904Z,1478872437.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:58.278Z,1478872438.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:58.700Z,1478872438.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:58.728Z,1478872438.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:59.081Z,1478872439.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:59.108Z,1478872439.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:53:59.461Z,1478872439.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:59.860Z,1478872439.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:53:59.904Z,1478872439.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:00.273Z,1478872440.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:00.701Z,1478872440.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:00.754Z,1478872440.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:01.092Z,1478872441.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:01.148Z,1478872441.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:01.477Z,1478872441.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:01.897Z,1478872441.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:01.944Z,1478872441.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:02.275Z,1478872442.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:02.678Z,1478872442.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:02.740Z,1478872442.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:03.102Z,1478872443.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:03.475Z,1478872443.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:03.536Z,1478872443.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:03.877Z,1478872443.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:03.944Z,1478872443.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:04.282Z,1478872444.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:04.723Z,1478872444.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:04.741Z,1478872444.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:05.129Z,1478872445.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:05.485Z,1478872445.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:05.504Z,1478872445.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:05.893Z,1478872445.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:06.300Z,1478872446.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:06.306Z,1478872446.306 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T13:54:06.306Z,1478872446.306 [BPC1] Data Fault, FailCount= 1
2016-11-11T13:54:06.306Z,1478872446.306 [BPC1](ERROR): Data Fault
2016-11-11T13:54:06.325Z,1478872446.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:06.410Z,1478872446.410 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T13:54:06.724Z,1478872446.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:07.064Z,1478872447.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:07.069Z,1478872447.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:07.485Z,1478872447.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:07.525Z,1478872447.525 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:54:07.525Z,1478872447.526 [BPC1] No Fault, FailCount= 1
2016-11-11T13:54:07.860Z,1478872447.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:07.941Z,1478872447.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:08.310Z,1478872448.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:08.656Z,1478872448.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:08.716Z,1478872448.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:09.061Z,1478872449.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:09.064Z,1478872449.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:09.464Z,1478872449.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:09.860Z,1478872449.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:09.864Z,1478872449.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:10.272Z,1478872450.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:10.657Z,1478872450.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:10.706Z,1478872450.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:11.064Z,1478872451.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:11.082Z,1478872451.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:11.477Z,1478872451.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:11.860Z,1478872451.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:11.868Z,1478872451.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:12.257Z,1478872452.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:12.657Z,1478872452.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:12.714Z,1478872452.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:13.065Z,1478872453.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:13.072Z,1478872453.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:13.465Z,1478872453.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:13.868Z,1478872453.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:13.901Z,1478872453.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:14.273Z,1478872454.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:14.664Z,1478872454.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:14.681Z,1478872454.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:15.066Z,1478872455.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:15.140Z,1478872455.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:15.471Z,1478872455.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:15.877Z,1478872455.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:15.936Z,1478872455.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:16.277Z,1478872456.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:16.665Z,1478872456.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:16.732Z,1478872456.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:17.122Z,1478872457.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:17.508Z,1478872457.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:17.522Z,1478872457.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:17.880Z,1478872457.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:18.277Z,1478872458.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:18.304Z,1478872458.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:18.677Z,1478872458.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:19.101Z,1478872459.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:19.147Z,1478872459.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:19.469Z,1478872459.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:19.516Z,1478872459.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:19.881Z,1478872459.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:20.274Z,1478872460.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:20.312Z,1478872460.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:20.737Z,1478872460.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:21.012Z,1478872461.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:21.085Z,1478872461.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:21.509Z,1478872461.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:21.808Z,1478872461.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:21.901Z,1478872461.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:22.605Z,1478872462.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:23.056Z,1478872463.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:23.852Z,1478872463.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:24.648Z,1478872464.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:25.056Z,1478872465.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:25.409Z,1478872465.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:25.589Z,1478872465.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:25.852Z,1478872465.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:25.922Z,1478872465.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:26.351Z,1478872466.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:26.648Z,1478872466.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:26.718Z,1478872466.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:27.056Z,1478872467.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:27.115Z,1478872467.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:27.512Z,1478872467.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:27.852Z,1478872467.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:27.921Z,1478872467.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:28.312Z,1478872468.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:28.648Z,1478872468.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:28.778Z,1478872468.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:29.105Z,1478872469.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:29.152Z,1478872469.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:29.504Z,1478872469.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:29.905Z,1478872469.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:29.948Z,1478872469.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:30.314Z,1478872470.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:30.717Z,1478872470.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:30.744Z,1478872470.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:31.156Z,1478872471.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:31.468Z,1478872471.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:31.523Z,1478872471.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:31.913Z,1478872471.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:32.264Z,1478872472.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:32.310Z,1478872472.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:32.713Z,1478872472.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:33.060Z,1478872473.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:33.145Z,1478872473.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:33.472Z,1478872473.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:33.519Z,1478872473.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:33.917Z,1478872473.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:34.268Z,1478872474.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:34.356Z,1478872474.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:34.713Z,1478872474.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:34.994Z,1478872474.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:35.127Z,1478872475.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:35.520Z,1478872475.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:35.788Z,1478872475.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:35.932Z,1478872475.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:36.319Z,1478872476.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:36.585Z,1478872476.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:36.741Z,1478872476.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:37.005Z,1478872477.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:37.125Z,1478872477.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:37.497Z,1478872477.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:37.800Z,1478872477.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:37.910Z,1478872477.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:38.305Z,1478872478.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:38.597Z,1478872478.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:38.749Z,1478872478.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:39.008Z,1478872479.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:39.115Z,1478872479.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:39.533Z,1478872479.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:39.804Z,1478872479.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:39.914Z,1478872479.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:40.357Z,1478872480.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:40.601Z,1478872480.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:40.759Z,1478872480.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:41.012Z,1478872481.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:41.119Z,1478872481.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:41.524Z,1478872481.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:41.808Z,1478872481.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:41.914Z,1478872481.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:42.296Z,1478872482.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:42.604Z,1478872482.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:42.744Z,1478872482.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:43.113Z,1478872483.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:43.128Z,1478872483.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:43.504Z,1478872483.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:43.909Z,1478872483.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:43.924Z,1478872483.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:44.316Z,1478872484.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:44.704Z,1478872484.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:44.720Z,1478872484.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:45.127Z,1478872485.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:45.448Z,1478872485.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:45.528Z,1478872485.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:45.915Z,1478872485.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:46.246Z,1478872486.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:46.321Z,1478872486.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:46.726Z,1478872486.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:47.041Z,1478872487.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:47.126Z,1478872487.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:47.476Z,1478872487.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:47.498Z,1478872487.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:47.901Z,1478872487.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:48.272Z,1478872488.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:48.297Z,1478872488.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:48.708Z,1478872488.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:48.972Z,1478872488.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:49.104Z,1478872489.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:49.502Z,1478872489.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:49.768Z,1478872489.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:49.913Z,1478872489.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:50.309Z,1478872490.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:50.570Z,1478872490.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:50.749Z,1478872490.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:50.996Z,1478872490.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:51.122Z,1478872491.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:51.557Z,1478872491.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:51.792Z,1478872491.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:51.918Z,1478872491.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:52.323Z,1478872492.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:52.589Z,1478872492.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:52.741Z,1478872492.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:53.008Z,1478872493.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:53.116Z,1478872493.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:53.516Z,1478872493.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:53.804Z,1478872493.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:53.933Z,1478872493.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:54.316Z,1478872494.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:54.600Z,1478872494.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:54.749Z,1478872494.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:55.008Z,1478872495.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:55.135Z,1478872495.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:55.504Z,1478872495.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:55.804Z,1478872495.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:55.948Z,1478872495.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:56.311Z,1478872496.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:56.600Z,1478872496.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:56.726Z,1478872496.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:57.122Z,1478872497.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:57.136Z,1478872497.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:57.513Z,1478872497.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:57.912Z,1478872497.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:57.932Z,1478872497.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:58.317Z,1478872498.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:58.716Z,1478872498.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:58.728Z,1478872498.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:59.116Z,1478872499.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:59.428Z,1478872499.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:54:59.513Z,1478872499.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:54:59.913Z,1478872499.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:00.226Z,1478872500.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:00.305Z,1478872500.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:00.717Z,1478872500.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:01.036Z,1478872501.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:01.126Z,1478872501.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:01.456Z,1478872501.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:01.516Z,1478872501.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:01.923Z,1478872501.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:02.254Z,1478872502.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:02.320Z,1478872502.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:02.696Z,1478872502.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:02.952Z,1478872502.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:03.108Z,1478872503.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:03.507Z,1478872503.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:03.748Z,1478872503.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:03.903Z,1478872503.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:04.312Z,1478872504.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:04.545Z,1478872504.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:04.712Z,1478872504.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:04.956Z,1478872504.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:05.108Z,1478872505.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:05.513Z,1478872505.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:05.752Z,1478872505.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:05.941Z,1478872505.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:06.318Z,1478872506.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:06.549Z,1478872506.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:06.728Z,1478872506.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:06.960Z,1478872506.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:07.153Z,1478872507.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:07.521Z,1478872507.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:07.757Z,1478872507.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:07.933Z,1478872507.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:08.333Z,1478872508.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:08.553Z,1478872508.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:08.701Z,1478872508.701 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:08.701Z,1478872508.701 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 162
2016-11-11T13:55:08.702Z,1478872508.702 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:55:08.728Z,1478872508.728 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:08.729Z,1478872508.729 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 162
2016-11-11T13:55:08.729Z,1478872508.729 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:55:08.731Z,1478872508.731 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:08.731Z,1478872508.731 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 162
2016-11-11T13:55:08.735Z,1478872508.735 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:55:08.766Z,1478872508.766 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:55:08.766Z,1478872508.766 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:55:08.766Z,1478872508.766 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:55:08.968Z,1478872508.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:09.182Z,1478872509.182 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:55:09.182Z,1478872509.182 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 162
2016-11-11T13:55:09.183Z,1478872509.183 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:55:09.183Z,1478872509.183 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 162
2016-11-11T13:55:09.188Z,1478872509.188 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:55:09.188Z,1478872509.188 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 162
2016-11-11T13:55:09.532Z,1478872509.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:55:09.532Z,1478872509.532 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:55:09.533Z,1478872509.533 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:55:09.537Z,1478872509.537 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:55:09.538Z,1478872509.538 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:55:09.538Z,1478872509.538 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:55:09.539Z,1478872509.539 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:55:09.539Z,1478872509.539 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:55:09.540Z,1478872509.540 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:55:09.764Z,1478872509.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:09.903Z,1478872509.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:10.312Z,1478872510.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:10.560Z,1478872510.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:10.743Z,1478872510.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:11.108Z,1478872511.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:11.114Z,1478872511.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:11.512Z,1478872511.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:11.904Z,1478872511.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:11.917Z,1478872511.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:12.320Z,1478872512.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:12.700Z,1478872512.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:12.717Z,1478872512.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:13.109Z,1478872513.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:13.404Z,1478872513.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:13.521Z,1478872513.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:13.897Z,1478872513.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:14.200Z,1478872514.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:14.305Z,1478872514.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:14.705Z,1478872514.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:14.997Z,1478872514.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:15.108Z,1478872515.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:15.408Z,1478872515.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:15.504Z,1478872515.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:15.904Z,1478872515.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:16.204Z,1478872516.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:16.321Z,1478872516.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:16.716Z,1478872516.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:16.928Z,1478872516.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:17.109Z,1478872517.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:17.508Z,1478872517.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:17.724Z,1478872517.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:17.910Z,1478872517.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:18.306Z,1478872518.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:18.521Z,1478872518.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:18.714Z,1478872518.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:18.932Z,1478872518.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:19.113Z,1478872519.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:19.506Z,1478872519.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:19.728Z,1478872519.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:19.913Z,1478872519.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:20.354Z,1478872520.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:20.536Z,1478872520.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:20.722Z,1478872520.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:20.960Z,1478872520.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:21.116Z,1478872521.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:21.538Z,1478872521.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:21.756Z,1478872521.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:21.897Z,1478872521.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:22.553Z,1478872522.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:22.964Z,1478872522.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:23.760Z,1478872523.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:24.556Z,1478872524.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:25.036Z,1478872525.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:25.566Z,1478872525.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:25.699Z,1478872525.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:25.832Z,1478872525.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:26.085Z,1478872526.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:26.463Z,1478872526.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:26.628Z,1478872526.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:26.844Z,1478872526.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:27.257Z,1478872527.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:27.380Z,1478872527.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:27.647Z,1478872527.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:28.049Z,1478872528.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:28.176Z,1478872528.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:28.453Z,1478872528.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:28.853Z,1478872528.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:28.973Z,1478872528.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:29.267Z,1478872529.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:29.384Z,1478872529.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:29.665Z,1478872529.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:30.047Z,1478872530.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:30.181Z,1478872530.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:30.446Z,1478872530.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:30.825Z,1478872530.825 [PNI_TCM](ERROR): CRC does not match. Expected:0x28285 got:0x52761
2016-11-11T13:55:30.862Z,1478872530.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:30.916Z,1478872530.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:31.260Z,1478872531.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:31.657Z,1478872531.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:31.712Z,1478872531.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:32.061Z,1478872532.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:32.426Z,1478872532.426 [PNI_TCM](ERROR): CRC does not match. Expected:0x3209 got:0x44572
2016-11-11T13:55:32.505Z,1478872532.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:32.509Z,1478872532.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:32.838Z,1478872532.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:32.920Z,1478872532.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:33.240Z,1478872533.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:33.641Z,1478872533.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:33.716Z,1478872533.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:34.050Z,1478872534.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:34.444Z,1478872534.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:34.512Z,1478872534.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:34.853Z,1478872534.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:34.924Z,1478872534.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:35.247Z,1478872535.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:35.664Z,1478872535.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:35.720Z,1478872535.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:36.037Z,1478872536.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:36.441Z,1478872536.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:36.516Z,1478872536.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:36.854Z,1478872536.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:36.928Z,1478872536.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:37.235Z,1478872537.234 [PNI_TCM](ERROR): CRC does not match. Expected:0x994 got:0x58944
2016-11-11T13:55:37.305Z,1478872537.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:37.658Z,1478872537.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:37.725Z,1478872537.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:38.049Z,1478872538.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:38.453Z,1478872538.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:38.520Z,1478872538.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:38.897Z,1478872538.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:39.020Z,1478872539.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:39.249Z,1478872539.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:39.658Z,1478872539.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:39.816Z,1478872539.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:40.048Z,1478872540.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:40.465Z,1478872540.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:40.612Z,1478872540.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:40.869Z,1478872540.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:41.244Z,1478872541.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:41.368Z,1478872541.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:41.651Z,1478872541.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:42.053Z,1478872542.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:42.164Z,1478872542.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:42.450Z,1478872542.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:42.849Z,1478872542.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:42.961Z,1478872542.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:43.249Z,1478872543.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:43.372Z,1478872543.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:43.641Z,1478872543.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:44.049Z,1478872544.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:44.168Z,1478872544.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:44.506Z,1478872544.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:44.848Z,1478872544.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:44.888Z,1478872544.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:45.248Z,1478872545.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:45.652Z,1478872545.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:45.684Z,1478872545.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:46.045Z,1478872546.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:46.481Z,1478872546.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:46.525Z,1478872546.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:46.873Z,1478872546.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:46.904Z,1478872546.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:47.247Z,1478872547.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:47.649Z,1478872547.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:47.700Z,1478872547.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:48.041Z,1478872548.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:48.496Z,1478872548.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:48.510Z,1478872548.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:48.850Z,1478872548.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:48.904Z,1478872548.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:49.245Z,1478872549.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:49.644Z,1478872549.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:49.700Z,1478872549.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:50.053Z,1478872550.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:50.496Z,1478872550.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:50.509Z,1478872550.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:50.837Z,1478872550.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:50.904Z,1478872550.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:51.262Z,1478872551.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:51.686Z,1478872551.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:51.700Z,1478872551.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:52.065Z,1478872552.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:52.465Z,1478872552.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:52.496Z,1478872552.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:52.841Z,1478872552.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:52.984Z,1478872552.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:53.277Z,1478872553.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:53.649Z,1478872553.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:53.780Z,1478872553.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:54.045Z,1478872554.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:54.486Z,1478872554.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:54.576Z,1478872554.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:54.842Z,1478872554.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:55.283Z,1478872555.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:55.340Z,1478872555.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:55.661Z,1478872555.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:56.052Z,1478872556.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:56.136Z,1478872556.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:56.456Z,1478872556.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:56.860Z,1478872556.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:56.933Z,1478872556.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:57.260Z,1478872557.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:57.344Z,1478872557.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:57.666Z,1478872557.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:58.058Z,1478872558.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:58.141Z,1478872558.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:58.521Z,1478872558.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:58.837Z,1478872558.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:58.872Z,1478872558.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:55:59.237Z,1478872559.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:59.641Z,1478872559.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:55:59.668Z,1478872559.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:00.041Z,1478872560.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:00.094Z,1478872560.094 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T13:56:00.465Z,1478872560.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:00.494Z,1478872560.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:00.849Z,1478872560.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:00.876Z,1478872560.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:01.245Z,1478872561.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:01.657Z,1478872561.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:01.672Z,1478872561.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:02.053Z,1478872562.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:02.468Z,1478872562.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:02.522Z,1478872562.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:02.860Z,1478872562.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:02.888Z,1478872562.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:03.249Z,1478872563.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:03.657Z,1478872563.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:03.684Z,1478872563.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:04.054Z,1478872564.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:04.480Z,1478872564.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:04.519Z,1478872564.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:04.841Z,1478872564.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:04.888Z,1478872564.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:05.245Z,1478872565.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:05.647Z,1478872565.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:05.684Z,1478872565.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:06.046Z,1478872566.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:06.480Z,1478872566.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:06.482Z,1478872566.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:06.869Z,1478872566.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:06.972Z,1478872566.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:07.269Z,1478872567.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:07.697Z,1478872567.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:07.768Z,1478872567.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:08.070Z,1478872568.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:08.440Z,1478872568.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:08.564Z,1478872568.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:08.892Z,1478872568.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:09.246Z,1478872569.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:09.332Z,1478872569.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:09.683Z,1478872569.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:10.076Z,1478872570.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:10.128Z,1478872570.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:10.443Z,1478872570.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:10.845Z,1478872570.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:10.924Z,1478872570.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:11.237Z,1478872571.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:11.336Z,1478872571.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:11.641Z,1478872571.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:12.070Z,1478872572.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:12.132Z,1478872572.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:12.521Z,1478872572.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:12.840Z,1478872572.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:12.869Z,1478872572.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:13.253Z,1478872573.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:13.636Z,1478872573.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:13.647Z,1478872573.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:14.045Z,1478872574.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:14.434Z,1478872574.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:14.510Z,1478872574.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:14.842Z,1478872574.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:14.876Z,1478872574.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:15.253Z,1478872575.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:15.651Z,1478872575.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:15.672Z,1478872575.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:16.042Z,1478872576.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:16.468Z,1478872576.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:16.482Z,1478872576.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:16.861Z,1478872576.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:16.876Z,1478872576.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:17.264Z,1478872577.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:17.655Z,1478872577.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:17.672Z,1478872577.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:18.060Z,1478872578.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:18.468Z,1478872578.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:18.502Z,1478872578.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:18.835Z,1478872578.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:18.876Z,1478872578.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:19.237Z,1478872579.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:19.640Z,1478872579.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:19.672Z,1478872579.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:20.039Z,1478872580.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:20.445Z,1478872580.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:20.468Z,1478872580.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:20.877Z,1478872580.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:20.924Z,1478872580.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:21.251Z,1478872581.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:21.653Z,1478872581.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:21.720Z,1478872581.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:22.073Z,1478872582.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:22.516Z,1478872582.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:23.296Z,1478872583.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:24.092Z,1478872584.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:24.891Z,1478872584.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:25.304Z,1478872585.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:25.556Z,1478872585.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:25.702Z,1478872585.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:26.061Z,1478872586.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:26.100Z,1478872586.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:26.483Z,1478872586.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:26.824Z,1478872586.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:26.833Z,1478872586.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:27.266Z,1478872587.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:27.620Z,1478872587.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:27.629Z,1478872587.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:28.073Z,1478872588.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:28.417Z,1478872588.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:28.493Z,1478872588.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:28.837Z,1478872588.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:28.848Z,1478872588.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:29.236Z,1478872589.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:29.633Z,1478872589.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:29.644Z,1478872589.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:30.045Z,1478872590.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:30.441Z,1478872590.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:30.483Z,1478872590.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:30.845Z,1478872590.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:30.852Z,1478872590.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:31.225Z,1478872591.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:31.633Z,1478872591.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:31.648Z,1478872591.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:32.029Z,1478872592.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:32.444Z,1478872592.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:32.476Z,1478872592.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:32.841Z,1478872592.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:32.852Z,1478872592.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:33.247Z,1478872593.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:33.648Z,1478872593.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:33.650Z,1478872593.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:34.070Z,1478872594.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:34.444Z,1478872594.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:34.446Z,1478872594.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:34.833Z,1478872594.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:34.920Z,1478872594.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:35.228Z,1478872595.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:35.635Z,1478872595.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:35.716Z,1478872595.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:36.033Z,1478872596.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:36.433Z,1478872596.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:36.512Z,1478872596.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:36.900Z,1478872596.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:37.237Z,1478872597.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:37.268Z,1478872597.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:37.636Z,1478872597.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:38.037Z,1478872598.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:38.080Z,1478872598.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:38.441Z,1478872598.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:38.877Z,1478872598.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:38.889Z,1478872598.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:39.241Z,1478872599.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:39.288Z,1478872599.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:39.640Z,1478872599.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:40.045Z,1478872600.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:40.084Z,1478872600.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:40.493Z,1478872600.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:40.793Z,1478872600.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:40.841Z,1478872600.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:41.253Z,1478872601.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:41.588Z,1478872601.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:41.654Z,1478872601.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:42.058Z,1478872602.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:42.384Z,1478872602.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:42.489Z,1478872602.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:42.796Z,1478872602.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:42.844Z,1478872602.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:43.233Z,1478872603.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:43.594Z,1478872603.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:43.645Z,1478872603.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:44.032Z,1478872604.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:44.388Z,1478872604.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:44.480Z,1478872604.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:44.800Z,1478872604.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:44.834Z,1478872604.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:45.222Z,1478872605.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:45.596Z,1478872605.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:45.626Z,1478872605.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:46.028Z,1478872606.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:46.392Z,1478872606.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:46.469Z,1478872606.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:46.804Z,1478872606.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:46.830Z,1478872606.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:47.237Z,1478872607.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:47.610Z,1478872607.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:47.635Z,1478872607.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:48.033Z,1478872608.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:48.404Z,1478872608.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:48.432Z,1478872608.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:48.866Z,1478872608.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:48.908Z,1478872608.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:49.249Z,1478872609.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:49.646Z,1478872609.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:49.704Z,1478872609.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:50.025Z,1478872610.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:50.451Z,1478872610.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:50.500Z,1478872610.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:50.905Z,1478872610.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:51.229Z,1478872611.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:51.264Z,1478872611.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:51.628Z,1478872611.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:52.028Z,1478872612.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:52.060Z,1478872612.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:52.436Z,1478872612.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:52.856Z,1478872612.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:52.888Z,1478872612.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:53.244Z,1478872613.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:53.268Z,1478872613.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:53.645Z,1478872613.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:54.024Z,1478872614.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:54.064Z,1478872614.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:54.493Z,1478872614.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:54.768Z,1478872614.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:54.855Z,1478872614.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:55.268Z,1478872615.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:55.564Z,1478872615.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:55.641Z,1478872615.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:56.065Z,1478872616.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:56.361Z,1478872616.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:56.465Z,1478872616.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:56.772Z,1478872616.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:56.837Z,1478872616.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:57.230Z,1478872617.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:57.568Z,1478872617.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:57.641Z,1478872617.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:58.025Z,1478872618.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:58.377Z,1478872618.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:58.455Z,1478872618.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:58.800Z,1478872618.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:58.864Z,1478872618.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:59.228Z,1478872619.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:56:59.596Z,1478872619.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:56:59.637Z,1478872619.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:00.029Z,1478872620.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:00.392Z,1478872620.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:00.453Z,1478872620.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:00.800Z,1478872620.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:00.841Z,1478872620.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:01.241Z,1478872621.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:01.596Z,1478872621.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:01.641Z,1478872621.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:02.037Z,1478872622.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:02.393Z,1478872622.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:02.493Z,1478872622.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:02.828Z,1478872622.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:02.892Z,1478872622.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:03.233Z,1478872623.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:03.635Z,1478872623.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:03.688Z,1478872623.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:04.037Z,1478872624.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:04.431Z,1478872624.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:04.484Z,1478872624.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:04.924Z,1478872624.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:05.230Z,1478872625.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:05.240Z,1478872625.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:05.630Z,1478872625.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:06.033Z,1478872626.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:06.036Z,1478872626.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:06.430Z,1478872626.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:06.833Z,1478872626.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:06.871Z,1478872626.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:07.251Z,1478872627.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:07.264Z,1478872627.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:07.647Z,1478872627.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:08.060Z,1478872628.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:08.060Z,1478872628.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:08.489Z,1478872628.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:08.749Z,1478872628.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:08.838Z,1478872628.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:09.270Z,1478872629.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:09.544Z,1478872629.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:09.633Z,1478872629.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:10.066Z,1478872630.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:10.341Z,1478872630.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:10.470Z,1478872630.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:10.752Z,1478872630.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:10.833Z,1478872630.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:11.238Z,1478872631.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:11.548Z,1478872631.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:11.638Z,1478872631.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:12.033Z,1478872632.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:12.345Z,1478872632.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:12.434Z,1478872632.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:12.757Z,1478872632.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:12.837Z,1478872632.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:13.239Z,1478872633.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:13.552Z,1478872633.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:13.629Z,1478872633.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:14.037Z,1478872634.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:14.349Z,1478872634.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:14.430Z,1478872634.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:14.760Z,1478872634.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:14.840Z,1478872634.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:15.241Z,1478872635.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:15.556Z,1478872635.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:15.620Z,1478872635.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:16.026Z,1478872636.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:16.352Z,1478872636.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:16.517Z,1478872636.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:16.834Z,1478872636.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:16.868Z,1478872636.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:17.232Z,1478872637.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:17.630Z,1478872637.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:17.664Z,1478872637.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:18.028Z,1478872638.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:18.429Z,1478872638.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:18.460Z,1478872638.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:18.878Z,1478872638.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:19.200Z,1478872639.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:19.242Z,1478872639.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:19.653Z,1478872639.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:19.996Z,1478872639.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:20.057Z,1478872640.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:20.449Z,1478872640.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:20.792Z,1478872640.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:20.870Z,1478872640.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:21.222Z,1478872641.222 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T13:57:21.222Z,1478872641.222 [BPC1] Data Fault, FailCount= 1
2016-11-11T13:57:21.222Z,1478872641.222 [BPC1](ERROR): Data Fault
2016-11-11T13:57:21.231Z,1478872641.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:21.232Z,1478872641.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:21.276Z,1478872641.276 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T13:57:21.645Z,1478872641.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:22.028Z,1478872642.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:22.039Z,1478872642.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:22.452Z,1478872642.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:22.517Z,1478872642.517 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:57:22.517Z,1478872642.517 [BPC1] No Fault, FailCount= 1
2016-11-11T13:57:22.732Z,1478872642.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:23.530Z,1478872643.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:24.325Z,1478872644.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:24.740Z,1478872644.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:25.536Z,1478872645.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:26.333Z,1478872646.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:26.744Z,1478872646.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:27.540Z,1478872647.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:28.337Z,1478872648.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:28.748Z,1478872648.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:29.544Z,1478872649.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:29.913Z,1478872649.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:30.097Z,1478872650.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:30.340Z,1478872650.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:30.514Z,1478872650.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:30.865Z,1478872650.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:30.868Z,1478872650.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:31.228Z,1478872651.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:31.633Z,1478872651.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:31.664Z,1478872651.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:32.051Z,1478872652.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:32.440Z,1478872652.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:32.476Z,1478872652.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:32.888Z,1478872652.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:33.180Z,1478872653.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:33.255Z,1478872653.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:33.641Z,1478872653.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:33.978Z,1478872653.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:34.074Z,1478872654.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:34.433Z,1478872654.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:34.773Z,1478872654.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:34.878Z,1478872654.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:35.184Z,1478872655.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:35.259Z,1478872655.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:35.635Z,1478872655.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:35.980Z,1478872655.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:36.038Z,1478872656.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:36.473Z,1478872656.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:36.704Z,1478872656.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:36.846Z,1478872656.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:37.261Z,1478872657.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:37.500Z,1478872657.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:37.634Z,1478872657.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:38.066Z,1478872658.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:38.297Z,1478872658.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:38.468Z,1478872658.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:38.724Z,1478872658.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:38.879Z,1478872658.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:39.248Z,1478872659.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:39.520Z,1478872659.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:39.669Z,1478872659.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:40.057Z,1478872660.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:40.317Z,1478872660.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:40.460Z,1478872660.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:40.728Z,1478872660.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:40.875Z,1478872660.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:41.257Z,1478872661.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:41.524Z,1478872661.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:41.656Z,1478872661.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:42.062Z,1478872662.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:42.320Z,1478872662.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:42.525Z,1478872662.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:42.728Z,1478872662.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:42.861Z,1478872662.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:43.269Z,1478872663.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:43.524Z,1478872663.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:43.661Z,1478872663.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:44.069Z,1478872664.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:44.320Z,1478872664.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:44.534Z,1478872664.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:44.828Z,1478872664.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:44.849Z,1478872664.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:45.253Z,1478872665.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:45.624Z,1478872665.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:45.662Z,1478872665.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:46.072Z,1478872666.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:46.421Z,1478872666.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:46.482Z,1478872666.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:46.869Z,1478872666.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:47.156Z,1478872667.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:47.262Z,1478872667.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:47.661Z,1478872667.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:47.952Z,1478872667.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:48.056Z,1478872668.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:48.460Z,1478872668.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:48.749Z,1478872668.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:48.877Z,1478872668.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:49.180Z,1478872669.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:49.275Z,1478872669.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:49.645Z,1478872669.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:49.976Z,1478872669.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:50.037Z,1478872670.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:50.445Z,1478872670.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:50.680Z,1478872670.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:50.840Z,1478872670.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:51.245Z,1478872671.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:51.476Z,1478872671.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:51.661Z,1478872671.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:52.051Z,1478872672.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:52.273Z,1478872672.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:52.456Z,1478872672.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:52.708Z,1478872672.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:52.858Z,1478872672.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:53.228Z,1478872673.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:53.504Z,1478872673.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:53.629Z,1478872673.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:54.061Z,1478872674.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:54.301Z,1478872674.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:54.441Z,1478872674.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:54.708Z,1478872674.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:54.841Z,1478872674.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:55.240Z,1478872675.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:55.504Z,1478872675.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:55.637Z,1478872675.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:56.045Z,1478872676.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:56.300Z,1478872676.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:56.485Z,1478872676.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:56.708Z,1478872676.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:56.889Z,1478872676.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:57.250Z,1478872677.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:57.504Z,1478872677.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:57.645Z,1478872677.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:58.085Z,1478872678.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:58.300Z,1478872678.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:58.458Z,1478872678.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:58.788Z,1478872678.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:58.896Z,1478872678.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:59.273Z,1478872679.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:57:59.584Z,1478872679.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:57:59.646Z,1478872679.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:00.043Z,1478872680.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:00.381Z,1478872680.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:00.434Z,1478872680.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:00.840Z,1478872680.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:01.156Z,1478872681.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:01.233Z,1478872681.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:01.634Z,1478872681.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:01.952Z,1478872681.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:02.030Z,1478872682.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:02.433Z,1478872682.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:02.748Z,1478872682.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:02.829Z,1478872682.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:03.233Z,1478872683.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:03.544Z,1478872683.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:03.633Z,1478872683.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:04.048Z,1478872684.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:04.340Z,1478872684.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:04.444Z,1478872684.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:04.834Z,1478872684.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:05.136Z,1478872685.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:05.255Z,1478872685.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:05.633Z,1478872685.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:05.932Z,1478872685.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:06.034Z,1478872686.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:06.433Z,1478872686.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:06.728Z,1478872686.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:06.833Z,1478872686.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:07.233Z,1478872687.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:07.524Z,1478872687.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:07.647Z,1478872687.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:08.049Z,1478872688.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:08.320Z,1478872688.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:08.447Z,1478872688.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:08.847Z,1478872688.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:09.116Z,1478872689.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:09.233Z,1478872689.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:09.634Z,1478872689.634 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:09.634Z,1478872689.634 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 163
2016-11-11T13:58:09.634Z,1478872689.634 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T13:58:09.641Z,1478872689.641 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:09.641Z,1478872689.641 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 163
2016-11-11T13:58:09.641Z,1478872689.641 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T13:58:09.643Z,1478872689.643 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:09.643Z,1478872689.643 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 163
2016-11-11T13:58:09.643Z,1478872689.643 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T13:58:09.658Z,1478872689.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T13:58:09.658Z,1478872689.658 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T13:58:09.658Z,1478872689.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T13:58:09.912Z,1478872689.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:10.058Z,1478872690.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T13:58:10.058Z,1478872690.058 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 163
2016-11-11T13:58:10.059Z,1478872690.059 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T13:58:10.059Z,1478872690.059 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 163
2016-11-11T13:58:10.060Z,1478872690.060 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T13:58:10.060Z,1478872690.060 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 163
2016-11-11T13:58:10.427Z,1478872690.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T13:58:10.428Z,1478872690.428 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:58:10.428Z,1478872690.428 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:58:10.433Z,1478872690.433 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T13:58:10.433Z,1478872690.433 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:58:10.434Z,1478872690.434 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:58:10.434Z,1478872690.434 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T13:58:10.435Z,1478872690.435 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T13:58:10.435Z,1478872690.435 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T13:58:10.708Z,1478872690.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:10.834Z,1478872690.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:11.325Z,1478872691.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:11.504Z,1478872691.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:11.633Z,1478872691.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:12.132Z,1478872692.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:12.300Z,1478872692.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:12.432Z,1478872692.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:12.870Z,1478872692.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:13.096Z,1478872693.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:13.233Z,1478872693.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:13.665Z,1478872693.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:13.892Z,1478872693.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:14.032Z,1478872694.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:14.433Z,1478872694.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:14.692Z,1478872694.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:14.843Z,1478872694.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:15.233Z,1478872695.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:15.488Z,1478872695.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:15.633Z,1478872695.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:16.034Z,1478872696.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:16.286Z,1478872696.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:16.433Z,1478872696.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:16.833Z,1478872696.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:17.080Z,1478872697.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:17.232Z,1478872697.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:17.628Z,1478872697.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:17.876Z,1478872697.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:18.034Z,1478872698.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:18.433Z,1478872698.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:18.672Z,1478872698.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:18.832Z,1478872698.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:19.234Z,1478872699.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:19.468Z,1478872699.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:19.632Z,1478872699.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:20.035Z,1478872700.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:20.264Z,1478872700.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:20.433Z,1478872700.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:20.834Z,1478872700.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:21.060Z,1478872701.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:21.241Z,1478872701.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:21.262Z,1478872701.263 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T13:53:21.1Z
2016-11-11T13:58:21.263Z,1478872701.263 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T13:58:21.263Z,1478872701.263 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T13:58:21.634Z,1478872701.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:21.856Z,1478872701.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:22.652Z,1478872702.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:23.448Z,1478872703.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:24.167Z,1478872704.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:24.244Z,1478872704.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:24.305Z,1478872704.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:24.780Z,1478872704.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:25.188Z,1478872705.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:25.596Z,1478872705.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:26.004Z,1478872706.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:26.412Z,1478872706.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:26.820Z,1478872706.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:27.228Z,1478872707.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:27.636Z,1478872707.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:28.044Z,1478872708.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:28.452Z,1478872708.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:28.860Z,1478872708.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:29.268Z,1478872709.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:29.676Z,1478872709.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:30.084Z,1478872710.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:30.880Z,1478872710.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:31.052Z,1478872711.052 [NAL9602](INFO): SBD MO Status=2, MOMSN=347, MT Status=2, MTMSN=0
2016-11-11T13:58:31.052Z,1478872711.052 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T13:58:31.091Z,1478872711.091 [BPC1](ERROR): Failed to receive battery data
2016-11-11T13:58:31.091Z,1478872711.091 [BPC1] Communications Fault, FailCount= 1
2016-11-11T13:58:31.091Z,1478872711.091 [BPC1](ERROR): Communications Fault
2016-11-11T13:58:31.117Z,1478872711.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:31.157Z,1478872711.157 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T13:58:31.166Z,1478872711.166 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0212.lzma
2016-11-11T13:58:31.253Z,1478872711.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:31.288Z,1478872711.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:31.621Z,1478872711.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:31.969Z,1478872711.969 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0212.lzma.bak
2016-11-11T13:58:31.969Z,1478872711.969 [DataOverHttps](INFO): SBD MOMSN=4555465
2016-11-11T13:58:32.021Z,1478872712.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:32.041Z,1478872712.041 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:58:32.041Z,1478872712.041 [BPC1] No Fault, FailCount= 1
2016-11-11T13:58:32.084Z,1478872712.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:32.616Z,1478872712.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:33.412Z,1478872713.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:33.601Z,1478872713.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:33.737Z,1478872713.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:34.208Z,1478872714.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:34.640Z,1478872714.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:35.436Z,1478872715.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:36.232Z,1478872716.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:36.640Z,1478872716.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:37.185Z,1478872717.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:37.337Z,1478872717.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:37.436Z,1478872717.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:37.665Z,1478872717.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:38.061Z,1478872718.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:38.233Z,1478872718.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:38.471Z,1478872718.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:38.644Z,1478872718.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:38.871Z,1478872718.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:39.441Z,1478872719.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:40.236Z,1478872720.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:40.716Z,1478872720.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:41.512Z,1478872721.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:42.308Z,1478872722.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:42.315Z,1478872722.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:42.374Z,1478872722.374 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0213.lzma
2016-11-11T13:58:42.449Z,1478872722.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:42.833Z,1478872722.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:43.052Z,1478872723.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:43.165Z,1478872723.165 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0213.lzma.bak
2016-11-11T13:58:43.165Z,1478872723.165 [DataOverHttps](INFO): SBD MOMSN=4555467
2016-11-11T13:58:43.233Z,1478872723.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:43.848Z,1478872723.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:44.507Z,1478872724.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:44.516Z,1478872724.516 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T13:58:44.516Z,1478872724.516 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T13:58:44.517Z,1478872724.517 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T13:58:44.645Z,1478872724.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:44.686Z,1478872724.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:45.076Z,1478872725.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:45.872Z,1478872725.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:46.608Z,1478872726.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:47.404Z,1478872727.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:48.032Z,1478872728.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:48.200Z,1478872728.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:48.215Z,1478872728.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:48.556Z,1478872728.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:48.608Z,1478872728.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:49.001Z,1478872729.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:49.353Z,1478872729.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:49.404Z,1478872729.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:49.769Z,1478872729.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:50.199Z,1478872730.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:50.200Z,1478872730.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:50.581Z,1478872730.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:50.608Z,1478872730.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:50.978Z,1478872730.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:51.344Z,1478872731.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:51.404Z,1478872731.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:51.749Z,1478872731.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:52.200Z,1478872732.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:52.209Z,1478872732.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:52.554Z,1478872732.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:52.608Z,1478872732.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:52.956Z,1478872732.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:53.344Z,1478872733.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:53.404Z,1478872733.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:53.757Z,1478872733.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:54.145Z,1478872734.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:54.200Z,1478872734.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:54.546Z,1478872734.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:54.664Z,1478872734.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:54.971Z,1478872734.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:55.357Z,1478872735.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:55.460Z,1478872735.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:55.754Z,1478872735.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:56.166Z,1478872736.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:56.256Z,1478872736.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:56.557Z,1478872736.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:56.943Z,1478872736.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:57.040Z,1478872737.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:57.344Z,1478872737.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:57.748Z,1478872737.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:57.836Z,1478872737.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:58.161Z,1478872738.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:58.545Z,1478872738.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:58.633Z,1478872738.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:58.948Z,1478872738.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:59.044Z,1478872739.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:58:59.353Z,1478872739.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:59.753Z,1478872739.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:58:59.840Z,1478872739.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:00.202Z,1478872740.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:00.563Z,1478872740.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:00.592Z,1478872740.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:00.964Z,1478872740.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:01.361Z,1478872741.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:01.388Z,1478872741.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:01.706Z,1478872741.706 [NAL9602](INFO): SBD MO Status=0, MOMSN=347, MT Status=0, MTMSN=0
2016-11-11T13:59:01.706Z,1478872741.706 [NAL9602](INFO): No messages in MT queue
2016-11-11T13:59:01.738Z,1478872741.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:02.184Z,1478872742.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:02.286Z,1478872742.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:02.545Z,1478872742.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:02.592Z,1478872742.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:03.005Z,1478872743.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:03.381Z,1478872743.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:03.388Z,1478872743.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:03.741Z,1478872743.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:04.184Z,1478872744.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:04.202Z,1478872744.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:04.562Z,1478872744.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:04.592Z,1478872744.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:04.939Z,1478872744.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:05.373Z,1478872745.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:05.388Z,1478872745.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:05.785Z,1478872745.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:06.170Z,1478872746.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:06.184Z,1478872746.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:06.549Z,1478872746.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:06.957Z,1478872746.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:06.980Z,1478872746.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:07.304Z,1478872747.304 [NAL9602](INFO): Powering down
2016-11-11T13:59:07.362Z,1478872747.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:07.757Z,1478872747.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:07.792Z,1478872747.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:08.157Z,1478872748.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:08.541Z,1478872748.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:08.588Z,1478872748.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:08.941Z,1478872748.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:09.342Z,1478872749.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:09.384Z,1478872749.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:09.742Z,1478872749.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:10.142Z,1478872750.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:10.180Z,1478872750.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:10.549Z,1478872750.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:10.976Z,1478872750.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:10.992Z,1478872750.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:11.345Z,1478872751.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:11.754Z,1478872751.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:11.772Z,1478872751.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:12.141Z,1478872752.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:12.541Z,1478872752.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:12.568Z,1478872752.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:12.948Z,1478872752.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:13.336Z,1478872753.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:13.364Z,1478872753.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:13.749Z,1478872753.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:14.156Z,1478872754.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:14.160Z,1478872754.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:14.625Z,1478872754.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:14.943Z,1478872754.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:14.956Z,1478872754.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:15.349Z,1478872755.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:15.744Z,1478872755.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:15.752Z,1478872755.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:16.167Z,1478872756.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:16.548Z,1478872756.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:16.549Z,1478872756.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:16.945Z,1478872756.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:17.344Z,1478872757.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:17.393Z,1478872757.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:17.750Z,1478872757.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:18.140Z,1478872758.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:18.229Z,1478872758.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:18.552Z,1478872758.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:18.936Z,1478872758.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:18.953Z,1478872758.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:19.356Z,1478872759.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:19.732Z,1478872759.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:19.760Z,1478872759.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:20.162Z,1478872760.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:20.528Z,1478872760.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:20.558Z,1478872760.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:20.929Z,1478872760.929 [BPC1](ERROR): Failed to receive battery data
2016-11-11T13:59:20.929Z,1478872760.929 [BPC1] Communications Fault, FailCount= 1
2016-11-11T13:59:20.929Z,1478872760.929 [BPC1](ERROR): Communications Fault
2016-11-11T13:59:20.969Z,1478872760.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:21.013Z,1478872761.013 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T13:59:21.324Z,1478872761.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:21.357Z,1478872761.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:21.776Z,1478872761.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:22.122Z,1478872762.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:22.170Z,1478872762.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:22.259Z,1478872762.259 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T13:59:22.259Z,1478872762.259 [BPC1] No Fault, FailCount= 1
2016-11-11T13:59:22.540Z,1478872762.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:22.629Z,1478872762.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:22.948Z,1478872762.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:22.981Z,1478872762.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:23.349Z,1478872763.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:23.356Z,1478872763.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:23.751Z,1478872763.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:23.764Z,1478872763.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:24.144Z,1478872764.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:24.180Z,1478872764.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:24.589Z,1478872764.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:24.608Z,1478872764.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:24.944Z,1478872764.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:25.000Z,1478872765.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:25.343Z,1478872765.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:25.408Z,1478872765.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:25.749Z,1478872765.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:25.817Z,1478872765.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:26.157Z,1478872766.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:26.228Z,1478872766.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:26.608Z,1478872766.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:26.950Z,1478872766.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:27.004Z,1478872767.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:27.362Z,1478872767.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:27.736Z,1478872767.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:27.800Z,1478872767.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:28.173Z,1478872768.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:28.518Z,1478872768.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:28.562Z,1478872768.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:28.942Z,1478872768.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:29.313Z,1478872769.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:29.341Z,1478872769.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:29.749Z,1478872769.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:30.108Z,1478872770.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:30.188Z,1478872770.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:30.520Z,1478872770.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:30.547Z,1478872770.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:30.950Z,1478872770.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:31.325Z,1478872771.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:31.355Z,1478872771.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:31.749Z,1478872771.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:32.121Z,1478872772.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:32.173Z,1478872772.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:32.540Z,1478872772.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:32.557Z,1478872772.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:32.937Z,1478872772.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:33.336Z,1478872773.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:33.342Z,1478872773.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:33.773Z,1478872773.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:34.132Z,1478872774.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:34.194Z,1478872774.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:34.544Z,1478872774.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:34.554Z,1478872774.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:34.949Z,1478872774.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:35.349Z,1478872775.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:35.366Z,1478872775.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:35.761Z,1478872775.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:36.144Z,1478872776.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:36.229Z,1478872776.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:36.579Z,1478872776.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:36.600Z,1478872776.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:36.949Z,1478872776.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:37.343Z,1478872777.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:37.396Z,1478872777.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:37.749Z,1478872777.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:38.143Z,1478872778.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:38.192Z,1478872778.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:38.600Z,1478872778.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:38.957Z,1478872778.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:38.988Z,1478872778.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:39.361Z,1478872779.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:39.396Z,1478872779.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:39.741Z,1478872779.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:40.145Z,1478872780.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:40.192Z,1478872780.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:40.633Z,1478872780.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:40.943Z,1478872780.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:40.972Z,1478872780.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:41.346Z,1478872781.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:41.742Z,1478872781.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:41.792Z,1478872781.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:42.168Z,1478872782.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:42.488Z,1478872782.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:42.557Z,1478872782.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:42.953Z,1478872782.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:43.284Z,1478872783.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:43.357Z,1478872783.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:43.748Z,1478872783.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:44.109Z,1478872784.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:44.170Z,1478872784.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:44.552Z,1478872784.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:44.564Z,1478872784.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:44.945Z,1478872784.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:45.360Z,1478872785.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:46.156Z,1478872786.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:46.564Z,1478872786.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:47.360Z,1478872787.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:48.156Z,1478872788.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:48.564Z,1478872788.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:48.599Z,1478872788.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:48.753Z,1478872788.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:49.102Z,1478872789.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:49.360Z,1478872789.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:49.505Z,1478872789.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:49.942Z,1478872789.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:50.168Z,1478872790.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:50.313Z,1478872790.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:50.596Z,1478872790.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:50.726Z,1478872790.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:51.133Z,1478872791.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:51.392Z,1478872791.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:51.505Z,1478872791.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:51.913Z,1478872791.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:52.190Z,1478872792.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:52.313Z,1478872792.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:52.709Z,1478872792.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:52.936Z,1478872792.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:53.116Z,1478872793.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:53.494Z,1478872793.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:53.732Z,1478872793.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:53.918Z,1478872793.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:54.320Z,1478872794.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:54.529Z,1478872794.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:54.695Z,1478872794.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:54.940Z,1478872794.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:55.115Z,1478872795.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:55.509Z,1478872795.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:55.736Z,1478872795.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:55.903Z,1478872795.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:56.302Z,1478872796.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:56.464Z,1478872796.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:56.713Z,1478872796.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:57.120Z,1478872797.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:57.260Z,1478872797.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:57.520Z,1478872797.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:57.924Z,1478872797.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:58.057Z,1478872798.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:58.324Z,1478872798.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:58.468Z,1478872798.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:58.725Z,1478872798.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:59.133Z,1478872799.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:59.264Z,1478872799.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T13:59:59.497Z,1478872799.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T13:59:59.905Z,1478872799.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:00.064Z,1478872800.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:00.333Z,1478872800.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:00.484Z,1478872800.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:00.707Z,1478872800.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:01.105Z,1478872801.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:01.280Z,1478872801.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:01.501Z,1478872801.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:01.945Z,1478872801.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:02.077Z,1478872802.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:02.328Z,1478872802.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:02.488Z,1478872802.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:02.758Z,1478872802.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:03.129Z,1478872803.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:03.284Z,1478872803.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:03.531Z,1478872803.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:03.933Z,1478872803.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:04.080Z,1478872804.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:04.389Z,1478872804.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:04.580Z,1478872804.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:04.710Z,1478872804.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:05.145Z,1478872805.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:05.376Z,1478872805.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:05.545Z,1478872805.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:05.905Z,1478872805.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:06.172Z,1478872806.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:06.304Z,1478872806.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:06.706Z,1478872806.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:06.916Z,1478872806.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:07.109Z,1478872807.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:07.509Z,1478872807.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:07.712Z,1478872807.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:07.917Z,1478872807.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:08.312Z,1478872808.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:08.509Z,1478872808.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:08.717Z,1478872808.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:08.920Z,1478872808.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:09.111Z,1478872809.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:09.512Z,1478872809.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:09.716Z,1478872809.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:09.914Z,1478872809.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:10.302Z,1478872810.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:10.446Z,1478872810.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:10.715Z,1478872810.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:11.094Z,1478872811.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:11.240Z,1478872811.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:11.498Z,1478872811.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:11.901Z,1478872811.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:12.037Z,1478872812.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:12.307Z,1478872812.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:12.448Z,1478872812.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:12.698Z,1478872812.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:13.100Z,1478872813.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:13.244Z,1478872813.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:13.516Z,1478872813.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:13.901Z,1478872813.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:14.041Z,1478872814.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:14.309Z,1478872814.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:14.452Z,1478872814.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:14.713Z,1478872814.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:15.116Z,1478872815.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:15.248Z,1478872815.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:15.565Z,1478872815.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:15.936Z,1478872815.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:16.045Z,1478872816.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:16.341Z,1478872816.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:16.456Z,1478872816.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:16.713Z,1478872816.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:17.121Z,1478872817.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:17.252Z,1478872817.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:17.532Z,1478872817.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:17.919Z,1478872817.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:18.049Z,1478872818.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:18.320Z,1478872818.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:18.536Z,1478872818.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:18.736Z,1478872818.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:19.149Z,1478872819.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:19.332Z,1478872819.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:19.531Z,1478872819.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:19.944Z,1478872819.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:20.128Z,1478872820.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:20.326Z,1478872820.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:20.753Z,1478872820.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:20.896Z,1478872820.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:21.133Z,1478872821.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:21.505Z,1478872821.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:21.692Z,1478872821.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:21.912Z,1478872821.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:22.307Z,1478872822.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:22.489Z,1478872822.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:22.708Z,1478872822.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:22.900Z,1478872822.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:23.117Z,1478872823.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:23.518Z,1478872823.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:23.696Z,1478872823.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:23.918Z,1478872823.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:24.315Z,1478872824.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:24.424Z,1478872824.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:24.713Z,1478872824.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:25.117Z,1478872825.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:25.220Z,1478872825.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:25.520Z,1478872825.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:25.907Z,1478872825.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:26.017Z,1478872826.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:26.319Z,1478872826.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:26.428Z,1478872826.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:26.711Z,1478872826.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:27.111Z,1478872827.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:27.224Z,1478872827.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:27.500Z,1478872827.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:27.905Z,1478872827.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:28.021Z,1478872828.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:28.295Z,1478872828.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:28.432Z,1478872828.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:28.704Z,1478872828.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:29.103Z,1478872829.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:29.228Z,1478872829.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:29.506Z,1478872829.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:29.905Z,1478872829.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:30.025Z,1478872830.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:30.308Z,1478872830.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:30.436Z,1478872830.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:30.714Z,1478872830.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:31.137Z,1478872831.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:31.232Z,1478872831.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:31.512Z,1478872831.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:31.977Z,1478872831.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:32.028Z,1478872832.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:32.325Z,1478872832.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:32.512Z,1478872832.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:32.730Z,1478872832.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:33.099Z,1478872833.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:33.309Z,1478872833.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:33.541Z,1478872833.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:33.932Z,1478872833.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:34.104Z,1478872834.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:34.305Z,1478872834.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:34.730Z,1478872834.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:34.876Z,1478872834.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:35.125Z,1478872835.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:35.552Z,1478872835.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:35.672Z,1478872835.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:35.901Z,1478872835.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:36.324Z,1478872836.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:36.469Z,1478872836.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:36.721Z,1478872836.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:36.880Z,1478872836.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:37.136Z,1478872837.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:37.505Z,1478872837.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:37.676Z,1478872837.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:37.909Z,1478872837.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:38.321Z,1478872838.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:38.412Z,1478872838.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:38.720Z,1478872838.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:39.119Z,1478872839.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:39.208Z,1478872839.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:39.515Z,1478872839.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:39.905Z,1478872839.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:40.004Z,1478872840.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:40.321Z,1478872840.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:40.416Z,1478872840.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:40.720Z,1478872840.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:41.117Z,1478872841.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:41.212Z,1478872841.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:41.513Z,1478872841.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:41.910Z,1478872841.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:42.009Z,1478872842.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:42.321Z,1478872842.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:42.420Z,1478872842.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:42.717Z,1478872842.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:43.101Z,1478872843.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:43.216Z,1478872843.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:43.529Z,1478872843.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:43.924Z,1478872843.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:44.012Z,1478872844.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:44.317Z,1478872844.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:44.420Z,1478872844.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:44.741Z,1478872844.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:45.118Z,1478872845.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:45.216Z,1478872845.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:46.012Z,1478872846.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:46.504Z,1478872846.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:47.300Z,1478872847.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:48.096Z,1478872848.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:48.737Z,1478872848.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:48.852Z,1478872848.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:48.862Z,1478872848.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:49.239Z,1478872849.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:49.642Z,1478872849.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:49.648Z,1478872849.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:50.041Z,1478872850.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:50.445Z,1478872850.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:50.501Z,1478872850.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:50.823Z,1478872850.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:50.872Z,1478872850.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:51.266Z,1478872851.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:51.661Z,1478872851.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:51.668Z,1478872851.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:52.053Z,1478872852.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:52.372Z,1478872852.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:52.431Z,1478872852.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:52.833Z,1478872852.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:53.168Z,1478872853.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:53.233Z,1478872853.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:53.628Z,1478872853.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:53.965Z,1478872853.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:54.065Z,1478872854.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:54.376Z,1478872854.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:54.439Z,1478872854.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:54.836Z,1478872854.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:55.172Z,1478872855.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:55.241Z,1478872855.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:55.636Z,1478872855.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:55.969Z,1478872855.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:56.058Z,1478872856.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:56.391Z,1478872856.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:56.441Z,1478872856.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:56.840Z,1478872856.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:57.184Z,1478872857.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:57.236Z,1478872857.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:57.646Z,1478872857.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:57.988Z,1478872857.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:58.061Z,1478872858.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:58.396Z,1478872858.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:58.448Z,1478872858.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:58.845Z,1478872858.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:59.192Z,1478872859.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:00:59.237Z,1478872859.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:59.628Z,1478872859.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:00:59.988Z,1478872859.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:00.085Z,1478872860.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:00.446Z,1478872860.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:00.472Z,1478872860.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:00.830Z,1478872860.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:01.237Z,1478872861.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:01.268Z,1478872861.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:01.636Z,1478872861.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:02.037Z,1478872862.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:02.064Z,1478872862.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:02.531Z,1478872862.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:02.820Z,1478872862.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:02.833Z,1478872862.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:03.231Z,1478872863.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:03.616Z,1478872863.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:03.633Z,1478872863.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:04.054Z,1478872864.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:04.412Z,1478872864.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:04.466Z,1478872864.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:04.850Z,1478872864.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:04.908Z,1478872864.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:05.231Z,1478872865.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:05.662Z,1478872865.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:05.704Z,1478872865.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:06.062Z,1478872866.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:06.348Z,1478872866.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:06.432Z,1478872866.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:06.831Z,1478872866.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:07.144Z,1478872867.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:07.233Z,1478872867.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:07.633Z,1478872867.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:07.941Z,1478872867.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:08.037Z,1478872868.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:08.352Z,1478872868.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:08.437Z,1478872868.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:08.844Z,1478872868.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:09.148Z,1478872869.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:09.230Z,1478872869.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:09.628Z,1478872869.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:09.945Z,1478872869.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:10.042Z,1478872870.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:10.356Z,1478872870.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:10.437Z,1478872870.437 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:10.438Z,1478872870.438 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 164
2016-11-11T14:01:10.438Z,1478872870.438 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:01:10.448Z,1478872870.448 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:10.449Z,1478872870.448 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 164
2016-11-11T14:01:10.449Z,1478872870.449 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:01:10.451Z,1478872870.451 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:10.451Z,1478872870.451 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 164
2016-11-11T14:01:10.455Z,1478872870.455 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:01:10.486Z,1478872870.486 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:01:10.486Z,1478872870.486 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:01:10.486Z,1478872870.487 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:01:10.862Z,1478872870.862 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:01:10.862Z,1478872870.862 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 164
2016-11-11T14:01:10.863Z,1478872870.863 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:01:10.863Z,1478872870.863 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 164
2016-11-11T14:01:10.863Z,1478872870.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:01:10.863Z,1478872870.864 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 164
2016-11-11T14:01:11.152Z,1478872871.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:11.246Z,1478872871.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:01:11.247Z,1478872871.247 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:01:11.247Z,1478872871.247 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:01:11.252Z,1478872871.251 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:01:11.252Z,1478872871.252 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:01:11.252Z,1478872871.252 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:01:11.253Z,1478872871.253 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:01:11.253Z,1478872871.253 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:01:11.254Z,1478872871.253 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:01:11.645Z,1478872871.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:11.949Z,1478872871.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:12.029Z,1478872872.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:12.360Z,1478872872.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:12.451Z,1478872872.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:12.836Z,1478872872.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:13.156Z,1478872873.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:13.229Z,1478872873.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:13.630Z,1478872873.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:13.952Z,1478872873.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:14.104Z,1478872874.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:14.436Z,1478872874.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:14.472Z,1478872874.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:14.840Z,1478872874.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:15.234Z,1478872875.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:15.280Z,1478872875.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:15.645Z,1478872875.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:16.042Z,1478872876.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:16.076Z,1478872876.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:16.472Z,1478872876.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:16.821Z,1478872876.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:16.860Z,1478872876.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:17.269Z,1478872877.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:17.628Z,1478872877.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:17.656Z,1478872877.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:18.038Z,1478872878.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:18.452Z,1478872878.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:18.498Z,1478872878.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:18.833Z,1478872878.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:18.860Z,1478872878.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:19.247Z,1478872879.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:19.656Z,1478872879.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:19.658Z,1478872879.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:20.021Z,1478872880.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:20.336Z,1478872880.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:20.461Z,1478872880.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:20.861Z,1478872880.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:21.227Z,1478872881.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:21.629Z,1478872881.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:22.052Z,1478872882.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:22.433Z,1478872882.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:22.826Z,1478872882.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:23.233Z,1478872883.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:23.627Z,1478872883.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:24.033Z,1478872884.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:24.433Z,1478872884.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:24.830Z,1478872884.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:25.237Z,1478872885.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:25.634Z,1478872885.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:26.036Z,1478872886.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:26.438Z,1478872886.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:26.839Z,1478872886.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:27.144Z,1478872887.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:27.236Z,1478872887.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:27.637Z,1478872887.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:27.940Z,1478872887.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:28.084Z,1478872888.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:28.420Z,1478872888.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:28.456Z,1478872888.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:28.851Z,1478872888.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:29.225Z,1478872889.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:29.252Z,1478872889.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:29.626Z,1478872889.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:30.029Z,1478872890.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:30.048Z,1478872890.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:30.473Z,1478872890.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:30.792Z,1478872890.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:30.837Z,1478872890.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:31.230Z,1478872891.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:31.588Z,1478872891.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:31.661Z,1478872891.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:32.029Z,1478872892.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:32.384Z,1478872892.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:32.474Z,1478872892.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:32.796Z,1478872892.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:32.850Z,1478872892.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:33.233Z,1478872893.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:33.593Z,1478872893.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:33.641Z,1478872893.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:34.057Z,1478872894.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:34.320Z,1478872894.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:34.442Z,1478872894.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:34.861Z,1478872894.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:35.225Z,1478872895.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:35.657Z,1478872895.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:36.047Z,1478872896.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:36.453Z,1478872896.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:36.825Z,1478872896.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:37.231Z,1478872897.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:37.629Z,1478872897.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:38.032Z,1478872898.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:38.431Z,1478872898.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:38.837Z,1478872898.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:39.231Z,1478872899.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:39.633Z,1478872899.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:40.029Z,1478872900.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:40.428Z,1478872900.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:40.620Z,1478872900.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:40.835Z,1478872900.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:41.246Z,1478872901.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:41.417Z,1478872901.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:41.641Z,1478872901.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:42.060Z,1478872902.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:42.212Z,1478872902.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:42.448Z,1478872902.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:42.621Z,1478872902.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:42.840Z,1478872902.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:43.240Z,1478872903.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:43.416Z,1478872903.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:43.629Z,1478872903.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:44.027Z,1478872904.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:44.212Z,1478872904.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:44.450Z,1478872904.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:44.768Z,1478872904.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:44.832Z,1478872904.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:45.232Z,1478872905.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:45.564Z,1478872905.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:01:48.701Z,1478872908.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:48.833Z,1478872908.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:49.234Z,1478872909.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:49.601Z,1478872909.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:50.033Z,1478872910.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:50.395Z,1478872910.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:50.840Z,1478872910.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:51.196Z,1478872911.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:51.604Z,1478872911.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:52.013Z,1478872912.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:52.397Z,1478872912.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:52.802Z,1478872912.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:53.204Z,1478872913.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:53.604Z,1478872913.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:54.005Z,1478872914.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:54.398Z,1478872914.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:54.796Z,1478872914.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:55.206Z,1478872915.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:55.606Z,1478872915.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:56.043Z,1478872916.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:56.410Z,1478872916.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:56.808Z,1478872916.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:57.203Z,1478872917.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:57.616Z,1478872917.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:58.012Z,1478872918.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:58.413Z,1478872918.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:58.813Z,1478872918.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:59.218Z,1478872919.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:01:59.605Z,1478872919.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:00.001Z,1478872920.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:00.423Z,1478872920.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:00.805Z,1478872920.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:01.196Z,1478872921.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:01.606Z,1478872921.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:01.996Z,1478872921.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:02.406Z,1478872922.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:02.845Z,1478872922.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:03.229Z,1478872923.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:03.614Z,1478872923.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:04.025Z,1478872924.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:04.391Z,1478872924.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:04.826Z,1478872924.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:05.233Z,1478872925.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:05.591Z,1478872925.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:06.000Z,1478872926.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:06.394Z,1478872926.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:06.795Z,1478872926.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:07.201Z,1478872927.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:07.595Z,1478872927.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:08.001Z,1478872928.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:08.396Z,1478872928.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:08.809Z,1478872928.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:09.196Z,1478872929.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:09.604Z,1478872929.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:10.035Z,1478872930.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:10.396Z,1478872930.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:10.404Z,1478872930.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:02:10.815Z,1478872930.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:11.200Z,1478872931.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:02:11.209Z,1478872931.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:11.591Z,1478872931.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:11.998Z,1478872931.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:12.445Z,1478872932.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:12.796Z,1478872932.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:13.195Z,1478872933.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:13.602Z,1478872933.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:14.000Z,1478872934.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:14.403Z,1478872934.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:14.805Z,1478872934.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:15.192Z,1478872935.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:15.597Z,1478872935.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:15.993Z,1478872935.993 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T14:02:15.993Z,1478872935.993 [BPC1] Data Fault, FailCount= 1
2016-11-11T14:02:15.993Z,1478872935.993 [BPC1](ERROR): Data Fault
2016-11-11T14:02:16.002Z,1478872936.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:16.057Z,1478872936.057 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T14:02:16.404Z,1478872936.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:16.797Z,1478872936.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:17.200Z,1478872937.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:17.219Z,1478872937.219 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:02:17.220Z,1478872937.220 [BPC1] No Fault, FailCount= 1
2016-11-11T14:02:17.649Z,1478872937.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:18.021Z,1478872938.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:18.405Z,1478872938.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:18.788Z,1478872938.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:19.233Z,1478872939.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:19.660Z,1478872939.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:20.010Z,1478872940.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:20.409Z,1478872940.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:20.803Z,1478872940.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:21.214Z,1478872941.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:21.619Z,1478872941.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:22.002Z,1478872942.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:22.410Z,1478872942.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:22.809Z,1478872942.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:23.212Z,1478872943.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:23.614Z,1478872943.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:24.018Z,1478872944.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:24.407Z,1478872944.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:24.814Z,1478872944.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:25.217Z,1478872945.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:25.640Z,1478872945.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:26.006Z,1478872946.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:26.415Z,1478872946.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:26.815Z,1478872946.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:27.198Z,1478872947.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:27.605Z,1478872947.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:28.005Z,1478872948.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:28.419Z,1478872948.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:28.830Z,1478872948.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:29.205Z,1478872949.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:29.588Z,1478872949.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:30.079Z,1478872950.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:30.469Z,1478872950.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:30.797Z,1478872950.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:31.252Z,1478872951.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:31.629Z,1478872951.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:32.021Z,1478872952.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:32.423Z,1478872952.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:32.840Z,1478872952.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:33.210Z,1478872953.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:33.606Z,1478872953.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:34.052Z,1478872954.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:34.394Z,1478872954.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:34.805Z,1478872954.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:35.260Z,1478872955.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:35.618Z,1478872955.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:36.021Z,1478872956.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:36.401Z,1478872956.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:36.810Z,1478872956.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:37.209Z,1478872957.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:37.613Z,1478872957.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:38.002Z,1478872958.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:38.417Z,1478872958.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:38.816Z,1478872958.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:39.213Z,1478872959.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:39.609Z,1478872959.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:40.008Z,1478872960.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:40.409Z,1478872960.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:40.824Z,1478872960.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:41.221Z,1478872961.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:41.618Z,1478872961.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:42.033Z,1478872962.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:42.393Z,1478872962.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:42.814Z,1478872962.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:43.213Z,1478872963.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:43.608Z,1478872963.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:44.010Z,1478872964.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:44.398Z,1478872964.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:44.889Z,1478872964.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:45.222Z,1478872965.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:45.633Z,1478872965.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:49.069Z,1478872969.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:49.225Z,1478872969.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:49.574Z,1478872969.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:49.965Z,1478872969.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:50.340Z,1478872970.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:50.738Z,1478872970.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:51.150Z,1478872971.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:51.548Z,1478872971.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:51.952Z,1478872971.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:52.343Z,1478872972.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:52.732Z,1478872972.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:53.137Z,1478872973.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:53.541Z,1478872973.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:53.936Z,1478872973.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:54.335Z,1478872974.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:54.741Z,1478872974.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:55.136Z,1478872975.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:55.532Z,1478872975.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:55.941Z,1478872975.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:56.341Z,1478872976.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:56.735Z,1478872976.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:57.172Z,1478872977.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:57.541Z,1478872977.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:57.941Z,1478872977.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:58.341Z,1478872978.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:58.741Z,1478872978.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:59.137Z,1478872979.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:59.541Z,1478872979.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:02:59.932Z,1478872979.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:00.335Z,1478872980.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:00.733Z,1478872980.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:01.141Z,1478872981.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:01.590Z,1478872981.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:01.933Z,1478872981.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:02.333Z,1478872982.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:02.765Z,1478872982.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:03.137Z,1478872983.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:03.565Z,1478872983.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:03.962Z,1478872983.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:04.341Z,1478872984.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:04.742Z,1478872984.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:05.132Z,1478872985.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:05.537Z,1478872985.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:05.933Z,1478872985.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:06.336Z,1478872986.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:06.750Z,1478872986.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:07.136Z,1478872987.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:07.535Z,1478872987.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:07.931Z,1478872987.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:08.336Z,1478872988.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:08.735Z,1478872988.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:09.141Z,1478872989.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:09.536Z,1478872989.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:09.935Z,1478872989.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:10.336Z,1478872990.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:10.742Z,1478872990.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:11.135Z,1478872991.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:11.532Z,1478872991.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:11.936Z,1478872991.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:12.341Z,1478872992.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:12.741Z,1478872992.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:13.141Z,1478872993.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:13.541Z,1478872993.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:13.937Z,1478872993.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:14.336Z,1478872994.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:14.733Z,1478872994.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:15.141Z,1478872995.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:15.541Z,1478872995.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:16.001Z,1478872996.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:16.350Z,1478872996.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:16.761Z,1478872996.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:17.145Z,1478872997.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:17.566Z,1478872997.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:17.965Z,1478872997.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:18.345Z,1478872998.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:18.745Z,1478872998.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:19.149Z,1478872999.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:19.556Z,1478872999.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:19.976Z,1478872999.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:20.352Z,1478873000.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:20.748Z,1478873000.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:21.141Z,1478873001.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:21.536Z,1478873001.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:21.948Z,1478873001.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:22.346Z,1478873002.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:22.748Z,1478873002.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:23.149Z,1478873003.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:23.545Z,1478873003.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:23.942Z,1478873003.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:24.347Z,1478873004.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:24.750Z,1478873004.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:25.144Z,1478873005.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:25.549Z,1478873005.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:25.945Z,1478873005.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:26.342Z,1478873006.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:26.747Z,1478873006.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:27.149Z,1478873007.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:27.549Z,1478873007.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:27.949Z,1478873007.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:28.352Z,1478873008.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:28.752Z,1478873008.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:29.148Z,1478873009.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:29.552Z,1478873009.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:29.950Z,1478873009.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:30.401Z,1478873010.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:30.732Z,1478873010.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:31.165Z,1478873011.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:31.545Z,1478873011.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:31.970Z,1478873011.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:32.374Z,1478873012.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:32.745Z,1478873012.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:33.145Z,1478873013.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:33.540Z,1478873013.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:33.947Z,1478873013.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:34.350Z,1478873014.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:34.740Z,1478873014.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:35.149Z,1478873015.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:35.549Z,1478873015.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:35.941Z,1478873015.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:36.340Z,1478873016.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:36.749Z,1478873016.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:37.147Z,1478873017.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:37.546Z,1478873017.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:37.950Z,1478873017.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:38.348Z,1478873018.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:38.752Z,1478873018.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:39.151Z,1478873019.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:39.552Z,1478873019.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:39.948Z,1478873019.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:40.351Z,1478873020.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:40.752Z,1478873020.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:41.153Z,1478873021.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:41.553Z,1478873021.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:41.950Z,1478873021.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:42.358Z,1478873022.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:42.761Z,1478873022.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:43.160Z,1478873023.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:43.558Z,1478873023.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:43.957Z,1478873023.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:44.357Z,1478873024.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:44.782Z,1478873024.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:44.790Z,1478873024.790 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T14:03:44.791Z,1478873024.791 [Default:CheckIn:C.Wait] Stopped
2016-11-11T14:03:44.791Z,1478873024.791 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T14:03:44.791Z,1478873024.791 [Default:CheckIn:D] Running Loop=1
2016-11-11T14:03:45.137Z,1478873025.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:45.146Z,1478873025.146 [Default:CheckIn:D] Stopped
2016-11-11T14:03:45.146Z,1478873025.146 [Default:CheckIn:E] Running Loop=1
2016-11-11T14:03:45.540Z,1478873025.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:45.549Z,1478873025.549 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 553.730599 min 
2016-11-11T14:03:45.549Z,1478873025.549 [Default:CheckIn:E] Stopped
2016-11-11T14:03:45.549Z,1478873025.549 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T14:03:45.549Z,1478873025.549 [Default:CheckIn] Stopped
2016-11-11T14:03:45.549Z,1478873025.549 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T14:03:45.550Z,1478873025.550 [Default:CheckIn](INFO): Running loop #54
2016-11-11T14:03:45.550Z,1478873025.550 [Default:CheckIn] Running Loop=54
2016-11-11T14:03:45.550Z,1478873025.550 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T14:03:45.550Z,1478873025.550 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T14:03:45.949Z,1478873025.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:49.441Z,1478873029.441 [NAL9602](INFO): Powering up
2016-11-11T14:03:49.479Z,1478873029.479 [BPC1](ERROR): Failed to receive battery data
2016-11-11T14:03:49.479Z,1478873029.479 [BPC1] Communications Fault, FailCount= 1
2016-11-11T14:03:49.479Z,1478873029.479 [BPC1](ERROR): Communications Fault
2016-11-11T14:03:49.487Z,1478873029.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:49.507Z,1478873029.507 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T14:03:49.626Z,1478873029.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:49.988Z,1478873029.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:50.357Z,1478873030.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:50.393Z,1478873030.393 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:03:50.393Z,1478873030.393 [BPC1] No Fault, FailCount= 1
2016-11-11T14:03:50.827Z,1478873030.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:51.159Z,1478873031.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:51.560Z,1478873031.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:51.959Z,1478873031.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:52.365Z,1478873032.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:52.763Z,1478873032.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:53.160Z,1478873033.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:53.600Z,1478873033.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:53.970Z,1478873033.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:54.367Z,1478873034.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:54.762Z,1478873034.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:55.163Z,1478873035.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:55.562Z,1478873035.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:55.968Z,1478873035.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:56.361Z,1478873036.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:56.762Z,1478873036.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:57.171Z,1478873037.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:57.572Z,1478873037.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:57.969Z,1478873037.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:58.371Z,1478873038.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:58.764Z,1478873038.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:59.172Z,1478873039.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:59.575Z,1478873039.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:03:59.981Z,1478873039.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:00.328Z,1478873040.328 [NAL9602](INFO): NAL9602 initialized
2016-11-11T14:04:00.383Z,1478873040.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:00.755Z,1478873040.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:01.128Z,1478873041.128 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T14:04:01.128Z,1478873041.128 [NAL9602] Data Fault, FailCount= 1
2016-11-11T14:04:01.128Z,1478873041.128 [NAL9602](ERROR): Data Fault
2016-11-11T14:04:01.161Z,1478873041.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:01.214Z,1478873041.214 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T14:04:01.528Z,1478873041.528 [NAL9602](INFO): Powering down
2016-11-11T14:04:01.565Z,1478873041.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:01.964Z,1478873041.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:02.363Z,1478873042.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:02.405Z,1478873042.405 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T14:04:02.406Z,1478873042.406 [NAL9602] No Fault, FailCount= 1
2016-11-11T14:04:02.765Z,1478873042.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:03.163Z,1478873043.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:03.565Z,1478873043.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:03.965Z,1478873043.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:04.429Z,1478873044.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:04.761Z,1478873044.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:05.166Z,1478873045.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:05.562Z,1478873045.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:05.993Z,1478873045.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:06.362Z,1478873046.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:06.729Z,1478873046.729 [NAL9602](INFO): Powering up NAL9602
2016-11-11T14:04:06.813Z,1478873046.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:07.170Z,1478873047.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:07.593Z,1478873047.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:07.958Z,1478873047.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:08.365Z,1478873048.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:08.766Z,1478873048.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:09.162Z,1478873049.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:09.565Z,1478873049.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:09.969Z,1478873049.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:10.358Z,1478873050.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:10.763Z,1478873050.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:11.164Z,1478873051.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:11.565Z,1478873051.565 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:11.565Z,1478873051.565 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 165
2016-11-11T14:04:11.565Z,1478873051.565 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:04:11.574Z,1478873051.574 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:11.575Z,1478873051.575 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 165
2016-11-11T14:04:11.575Z,1478873051.575 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:04:11.578Z,1478873051.578 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:11.578Z,1478873051.578 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 165
2016-11-11T14:04:11.578Z,1478873051.578 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:04:11.683Z,1478873051.684 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:04:11.684Z,1478873051.684 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:04:11.684Z,1478873051.684 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:04:12.009Z,1478873052.009 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:04:12.009Z,1478873052.009 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 165
2016-11-11T14:04:12.010Z,1478873052.010 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:04:12.010Z,1478873052.010 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 165
2016-11-11T14:04:12.010Z,1478873052.010 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:04:12.010Z,1478873052.010 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 165
2016-11-11T14:04:12.362Z,1478873052.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:04:12.362Z,1478873052.362 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:04:12.362Z,1478873052.362 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:04:12.387Z,1478873052.388 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:04:12.388Z,1478873052.388 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:04:12.388Z,1478873052.388 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:04:12.389Z,1478873052.389 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:04:12.389Z,1478873052.389 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:04:12.390Z,1478873052.390 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:04:12.759Z,1478873052.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:13.159Z,1478873053.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:13.567Z,1478873053.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:13.972Z,1478873053.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:14.382Z,1478873054.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:14.769Z,1478873054.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:15.173Z,1478873055.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:15.557Z,1478873055.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:15.957Z,1478873055.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:16.369Z,1478873056.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:16.764Z,1478873056.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:17.163Z,1478873057.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:17.591Z,1478873057.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:17.921Z,1478873057.921 [NAL9602](INFO): NAL9602 initialized
2016-11-11T14:04:17.977Z,1478873057.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:18.405Z,1478873058.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:18.777Z,1478873058.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:19.215Z,1478873059.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:19.569Z,1478873059.569 [PNI_TCM](ERROR): CRC does not match. Expected:0x34914 got:0x16870
2016-11-11T14:04:19.621Z,1478873059.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:19.969Z,1478873059.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:20.355Z,1478873060.355 [PNI_TCM](ERROR): CRC does not match. Expected:0x44541 got:0x6335
2016-11-11T14:04:20.381Z,1478873060.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:20.821Z,1478873060.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:21.164Z,1478873061.164 [PNI_TCM](ERROR): CRC does not match. Expected:0x23267 got:0x7490
2016-11-11T14:04:21.189Z,1478873061.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:21.590Z,1478873061.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:21.961Z,1478873061.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:22.410Z,1478873062.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:22.767Z,1478873062.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:23.164Z,1478873063.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:23.574Z,1478873063.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:23.989Z,1478873063.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:24.353Z,1478873064.353 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2016-11-11T14:04:24.374Z,1478873064.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:24.754Z,1478873064.754 [PNI_TCM](ERROR): CRC does not match. Expected:0x4446 got:0x43203
2016-11-11T14:04:24.781Z,1478873064.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:25.168Z,1478873065.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:25.570Z,1478873065.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:25.984Z,1478873065.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:26.362Z,1478873066.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:26.758Z,1478873066.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:27.181Z,1478873067.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:27.563Z,1478873067.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:27.965Z,1478873067.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:28.372Z,1478873068.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:28.777Z,1478873068.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:29.166Z,1478873069.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:29.562Z,1478873069.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:29.973Z,1478873069.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:30.377Z,1478873070.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:30.757Z,1478873070.757 [PNI_TCM](ERROR): CRC does not match. Expected:0x52531 got:0x49150
2016-11-11T14:04:30.785Z,1478873070.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:30.936Z,1478873070.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:04:31.168Z,1478873071.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:31.568Z,1478873071.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:31.732Z,1478873071.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:04:31.970Z,1478873071.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:32.377Z,1478873072.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:32.776Z,1478873072.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:33.198Z,1478873073.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:33.576Z,1478873073.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:33.967Z,1478873073.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:34.409Z,1478873074.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:34.756Z,1478873074.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:35.185Z,1478873075.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:35.558Z,1478873075.557 [PNI_TCM](ERROR): CRC does not match. Expected:0x18490 got:0x18348
2016-11-11T14:04:35.661Z,1478873075.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:35.963Z,1478873075.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:36.402Z,1478873076.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:36.801Z,1478873076.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:37.177Z,1478873077.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:37.571Z,1478873077.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:37.977Z,1478873077.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:38.374Z,1478873078.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:38.759Z,1478873078.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:39.163Z,1478873079.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:39.563Z,1478873079.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:39.966Z,1478873079.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:40.358Z,1478873080.358 [PNI_TCM](ERROR): CRC does not match. Expected:0x60811 got:0x58944
2016-11-11T14:04:40.385Z,1478873080.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:40.768Z,1478873080.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:41.178Z,1478873081.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:41.637Z,1478873081.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:41.970Z,1478873081.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:42.361Z,1478873082.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:42.763Z,1478873082.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:43.169Z,1478873083.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:43.564Z,1478873083.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:43.965Z,1478873083.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:44.363Z,1478873084.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:44.765Z,1478873084.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:45.166Z,1478873085.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:45.577Z,1478873085.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:45.974Z,1478873085.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:49.421Z,1478873089.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:49.605Z,1478873089.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:49.920Z,1478873089.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:50.358Z,1478873090.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:50.737Z,1478873090.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:51.165Z,1478873091.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:51.632Z,1478873091.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:51.927Z,1478873091.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:52.330Z,1478873092.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:52.730Z,1478873092.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:53.107Z,1478873093.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:53.510Z,1478873093.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:53.922Z,1478873093.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:54.326Z,1478873094.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:54.714Z,1478873094.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:55.125Z,1478873095.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:55.520Z,1478873095.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:55.945Z,1478873095.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:56.320Z,1478873096.320 [PNI_TCM](ERROR): CRC does not match. Expected:0x56477 got:0x46876
2016-11-11T14:04:56.345Z,1478873096.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:56.733Z,1478873096.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:57.130Z,1478873097.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:57.527Z,1478873097.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:57.931Z,1478873097.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:58.326Z,1478873098.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:58.709Z,1478873098.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:59.129Z,1478873099.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:59.515Z,1478873099.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:04:59.917Z,1478873099.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:00.310Z,1478873100.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:00.725Z,1478873100.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:01.144Z,1478873101.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:01.524Z,1478873101.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:01.929Z,1478873101.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:02.365Z,1478873102.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:02.725Z,1478873102.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:03.094Z,1478873103.094 [PNI_TCM](ERROR): CRC does not match. Expected:0x3873 got:0x49149
2016-11-11T14:05:03.115Z,1478873103.115 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T14:05:03.116Z,1478873103.115 [BPC1] Data Fault, FailCount= 1
2016-11-11T14:05:03.116Z,1478873103.116 [BPC1](ERROR): Data Fault
2016-11-11T14:05:03.149Z,1478873103.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:03.178Z,1478873103.178 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T14:05:03.500Z,1478873103.500 [PNI_TCM](ERROR): CRC does not match. Expected:0x36835 got:0x16870
2016-11-11T14:05:03.519Z,1478873103.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:03.917Z,1478873103.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:04.317Z,1478873104.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:04.336Z,1478873104.336 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:05:04.336Z,1478873104.336 [BPC1] No Fault, FailCount= 1
2016-11-11T14:05:04.769Z,1478873104.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:05.133Z,1478873105.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:05.521Z,1478873105.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:05.929Z,1478873105.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:06.331Z,1478873106.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:06.731Z,1478873106.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:07.133Z,1478873107.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:07.579Z,1478873107.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:07.914Z,1478873107.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:08.312Z,1478873108.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:08.729Z,1478873108.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:09.100Z,1478873109.099 [PNI_TCM](ERROR): CRC does not match. Expected:0x6562 got:0x66
2016-11-11T14:05:09.118Z,1478873109.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:09.516Z,1478873109.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:09.916Z,1478873109.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:10.314Z,1478873110.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:10.694Z,1478873110.694 [PNI_TCM](ERROR): CRC does not match. Expected:0x38413 got:0x25682
2016-11-11T14:05:10.721Z,1478873110.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:11.116Z,1478873111.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:11.535Z,1478873111.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:11.928Z,1478873111.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:12.326Z,1478873112.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:12.734Z,1478873112.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:13.101Z,1478873113.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:13.507Z,1478873113.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:13.930Z,1478873113.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:14.314Z,1478873114.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:14.724Z,1478873114.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:15.103Z,1478873115.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:15.507Z,1478873115.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:15.938Z,1478873115.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:16.325Z,1478873116.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:16.722Z,1478873116.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:17.122Z,1478873117.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:17.601Z,1478873117.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:17.913Z,1478873117.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:18.345Z,1478873118.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:18.717Z,1478873118.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:19.145Z,1478873119.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:19.601Z,1478873119.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:19.925Z,1478873119.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:20.327Z,1478873120.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:20.722Z,1478873120.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:21.116Z,1478873121.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:21.592Z,1478873121.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:21.929Z,1478873121.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:22.307Z,1478873122.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:22.712Z,1478873122.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:23.120Z,1478873123.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:23.574Z,1478873123.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:23.913Z,1478873123.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:24.318Z,1478873124.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:24.722Z,1478873124.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:25.121Z,1478873125.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:25.517Z,1478873125.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:25.910Z,1478873125.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:26.314Z,1478873126.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:26.721Z,1478873126.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:27.127Z,1478873127.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:27.520Z,1478873127.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:27.934Z,1478873127.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:28.334Z,1478873128.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:28.713Z,1478873128.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:29.117Z,1478873129.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:29.511Z,1478873129.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:29.941Z,1478873129.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:30.325Z,1478873130.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:30.700Z,1478873130.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:31.109Z,1478873131.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:31.578Z,1478873131.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:31.950Z,1478873131.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:32.325Z,1478873132.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:32.757Z,1478873132.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:33.129Z,1478873133.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:33.601Z,1478873133.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:33.933Z,1478873133.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:34.327Z,1478873134.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:34.725Z,1478873134.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:35.105Z,1478873135.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:35.590Z,1478873135.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:35.909Z,1478873135.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:36.307Z,1478873136.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:36.713Z,1478873136.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:37.125Z,1478873137.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:37.594Z,1478873137.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:37.933Z,1478873137.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:38.330Z,1478873138.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:38.725Z,1478873138.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:39.100Z,1478873139.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:39.501Z,1478873139.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:39.913Z,1478873139.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:40.313Z,1478873140.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:40.701Z,1478873140.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:41.110Z,1478873141.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:41.526Z,1478873141.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:41.925Z,1478873141.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:42.326Z,1478873142.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:42.700Z,1478873142.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:43.105Z,1478873143.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:43.504Z,1478873143.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:43.904Z,1478873143.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:44.317Z,1478873144.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:44.716Z,1478873144.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:45.143Z,1478873145.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:45.606Z,1478873145.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:45.961Z,1478873145.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:46.337Z,1478873146.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:49.774Z,1478873149.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:49.898Z,1478873149.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:50.285Z,1478873150.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:50.693Z,1478873150.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:51.057Z,1478873151.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:51.451Z,1478873151.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:51.861Z,1478873151.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:52.260Z,1478873152.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:52.656Z,1478873152.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:53.061Z,1478873153.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:53.460Z,1478873153.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:53.860Z,1478873153.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:54.269Z,1478873154.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:54.663Z,1478873154.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:55.068Z,1478873155.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:55.450Z,1478873155.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:55.850Z,1478873155.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:56.253Z,1478873156.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:56.694Z,1478873156.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:57.085Z,1478873157.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:57.460Z,1478873157.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:57.866Z,1478873157.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:58.259Z,1478873158.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:58.673Z,1478873158.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:59.067Z,1478873159.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:59.443Z,1478873159.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:05:59.874Z,1478873159.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:00.282Z,1478873160.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:00.322Z,1478873160.322 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T14:06:00.668Z,1478873160.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:01.057Z,1478873161.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:01.562Z,1478873161.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:01.868Z,1478873161.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:02.282Z,1478873162.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:02.697Z,1478873162.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:03.071Z,1478873163.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:03.546Z,1478873163.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:03.857Z,1478873163.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:04.290Z,1478873164.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:04.661Z,1478873164.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:05.090Z,1478873165.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:05.504Z,1478873165.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:05.853Z,1478873165.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:06.254Z,1478873166.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:06.654Z,1478873166.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:07.057Z,1478873167.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:07.454Z,1478873167.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:07.856Z,1478873167.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:08.261Z,1478873168.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:08.661Z,1478873168.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:09.060Z,1478873169.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:09.460Z,1478873169.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:09.861Z,1478873169.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:10.266Z,1478873170.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:10.344Z,1478873170.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:10.657Z,1478873170.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:11.061Z,1478873171.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:11.140Z,1478873171.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:11.450Z,1478873171.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:11.858Z,1478873171.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:11.937Z,1478873171.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:12.271Z,1478873172.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:12.360Z,1478873172.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:12.642Z,1478873172.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:13.046Z,1478873173.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:13.158Z,1478873173.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:13.550Z,1478873173.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:13.861Z,1478873173.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:13.924Z,1478873173.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:14.252Z,1478873174.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:14.665Z,1478873174.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:15.051Z,1478873175.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:15.502Z,1478873175.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:15.901Z,1478873175.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:16.249Z,1478873176.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:16.657Z,1478873176.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:17.089Z,1478873177.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:17.502Z,1478873177.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:17.888Z,1478873177.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:18.279Z,1478873178.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:18.658Z,1478873178.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:19.089Z,1478873179.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:19.577Z,1478873179.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:19.881Z,1478873179.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:20.257Z,1478873180.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:20.658Z,1478873180.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:20.720Z,1478873180.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:21.054Z,1478873181.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:21.453Z,1478873181.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:21.516Z,1478873181.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:21.861Z,1478873181.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:21.964Z,1478873181.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:22.253Z,1478873182.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:22.642Z,1478873182.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:22.760Z,1478873182.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:23.046Z,1478873183.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:23.457Z,1478873183.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:23.556Z,1478873183.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:23.850Z,1478873183.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:24.275Z,1478873184.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:24.324Z,1478873184.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:24.666Z,1478873184.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:25.064Z,1478873185.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:25.120Z,1478873185.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:25.442Z,1478873185.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:25.842Z,1478873185.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:25.916Z,1478873185.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:26.252Z,1478873186.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:26.332Z,1478873186.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:26.654Z,1478873186.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:27.054Z,1478873187.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:27.128Z,1478873187.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:27.519Z,1478873187.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:27.862Z,1478873187.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:27.864Z,1478873187.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:28.261Z,1478873188.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:28.657Z,1478873188.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:29.060Z,1478873189.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:29.532Z,1478873189.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:29.855Z,1478873189.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:30.259Z,1478873190.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:30.680Z,1478873190.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:31.065Z,1478873191.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:31.561Z,1478873191.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:31.868Z,1478873191.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:32.273Z,1478873192.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:32.665Z,1478873192.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:33.069Z,1478873193.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:33.522Z,1478873193.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:33.873Z,1478873193.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:34.269Z,1478873194.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:34.680Z,1478873194.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:34.683Z,1478873194.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:35.041Z,1478873195.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:35.462Z,1478873195.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:35.476Z,1478873195.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:35.869Z,1478873195.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:35.956Z,1478873195.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:36.266Z,1478873196.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:36.662Z,1478873196.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:37.061Z,1478873197.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:37.457Z,1478873197.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:37.890Z,1478873197.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:38.267Z,1478873198.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:38.647Z,1478873198.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:39.043Z,1478873199.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:39.447Z,1478873199.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:39.852Z,1478873199.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:40.250Z,1478873200.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:40.668Z,1478873200.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:41.056Z,1478873201.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:41.495Z,1478873201.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:41.861Z,1478873201.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:42.243Z,1478873202.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:42.657Z,1478873202.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:43.054Z,1478873203.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:43.514Z,1478873203.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:43.862Z,1478873203.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:44.261Z,1478873204.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:44.651Z,1478873204.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:45.054Z,1478873205.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:45.493Z,1478873205.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:45.902Z,1478873205.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:46.210Z,1478873206.210 [NAL9602](INFO): SBD MO Status=2, MOMSN=348, MT Status=2, MTMSN=0
2016-11-11T14:06:46.210Z,1478873206.210 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T14:06:46.266Z,1478873206.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:46.691Z,1478873206.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:50.255Z,1478873210.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:50.437Z,1478873210.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:50.712Z,1478873210.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:50.791Z,1478873210.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:51.152Z,1478873211.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:51.508Z,1478873211.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:06:51.558Z,1478873211.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:51.966Z,1478873211.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:52.356Z,1478873212.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:52.757Z,1478873212.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:53.165Z,1478873213.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:53.545Z,1478873213.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:53.970Z,1478873213.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:54.353Z,1478873214.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:54.755Z,1478873214.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:55.167Z,1478873215.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:55.557Z,1478873215.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:55.957Z,1478873215.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:56.348Z,1478873216.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:56.758Z,1478873216.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:57.150Z,1478873217.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:57.561Z,1478873217.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:57.969Z,1478873217.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:58.357Z,1478873218.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:58.756Z,1478873218.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:59.165Z,1478873219.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:59.569Z,1478873219.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:06:59.968Z,1478873219.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:00.372Z,1478873220.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:00.745Z,1478873220.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:01.145Z,1478873221.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:01.553Z,1478873221.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:01.947Z,1478873221.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:02.348Z,1478873222.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:02.620Z,1478873222.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:02.787Z,1478873222.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:03.150Z,1478873223.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:03.416Z,1478873223.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:03.632Z,1478873223.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:03.912Z,1478873223.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:03.965Z,1478873223.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:04.391Z,1478873224.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:04.708Z,1478873224.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:04.794Z,1478873224.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:05.158Z,1478873225.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:05.504Z,1478873225.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:05.557Z,1478873225.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:05.956Z,1478873225.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:06.252Z,1478873226.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:06.353Z,1478873226.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:06.773Z,1478873226.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:07.048Z,1478873227.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:07.166Z,1478873227.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:07.560Z,1478873227.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:07.845Z,1478873227.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:07.954Z,1478873227.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:08.276Z,1478873228.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:08.340Z,1478873228.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:08.745Z,1478873228.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:09.072Z,1478873229.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:09.150Z,1478873229.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:09.553Z,1478873229.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:09.784Z,1478873229.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:09.953Z,1478873229.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:10.357Z,1478873230.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:10.580Z,1478873230.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:10.748Z,1478873230.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:11.148Z,1478873231.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:11.377Z,1478873231.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:11.555Z,1478873231.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:11.788Z,1478873231.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:11.958Z,1478873231.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:12.358Z,1478873232.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:12.584Z,1478873232.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:12.760Z,1478873232.760 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:12.760Z,1478873232.760 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 166
2016-11-11T14:07:12.760Z,1478873232.760 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:07:12.766Z,1478873232.766 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:12.766Z,1478873232.766 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 166
2016-11-11T14:07:12.766Z,1478873232.766 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:07:12.769Z,1478873232.769 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:12.769Z,1478873232.769 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 166
2016-11-11T14:07:12.769Z,1478873232.769 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:07:12.806Z,1478873232.806 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:07:12.807Z,1478873232.806 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:07:12.807Z,1478873232.807 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:07:13.172Z,1478873233.172 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:07:13.172Z,1478873233.172 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 166
2016-11-11T14:07:13.173Z,1478873233.173 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:07:13.173Z,1478873233.173 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 166
2016-11-11T14:07:13.173Z,1478873233.173 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:07:13.174Z,1478873233.174 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 166
2016-11-11T14:07:13.381Z,1478873233.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:13.557Z,1478873233.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:07:13.558Z,1478873233.557 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:07:13.558Z,1478873233.558 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:07:13.562Z,1478873233.562 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:07:13.563Z,1478873233.563 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:07:13.564Z,1478873233.564 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:07:13.564Z,1478873233.564 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:07:13.564Z,1478873233.565 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:07:13.565Z,1478873233.565 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:07:13.796Z,1478873233.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:13.941Z,1478873233.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:14.345Z,1478873234.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:14.592Z,1478873234.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:14.745Z,1478873234.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:15.171Z,1478873235.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:15.389Z,1478873235.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:15.579Z,1478873235.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:15.800Z,1478873235.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:15.948Z,1478873235.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:16.357Z,1478873236.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:16.596Z,1478873236.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:16.805Z,1478873236.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:17.158Z,1478873237.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:17.392Z,1478873237.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:17.558Z,1478873237.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:17.876Z,1478873237.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:17.981Z,1478873237.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:18.343Z,1478873238.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:18.672Z,1478873238.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:18.782Z,1478873238.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:19.185Z,1478873239.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:19.468Z,1478873239.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:19.582Z,1478873239.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:19.958Z,1478873239.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:20.256Z,1478873240.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:20.365Z,1478873240.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:20.776Z,1478873240.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:21.054Z,1478873241.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:21.151Z,1478873241.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:21.562Z,1478873241.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:21.849Z,1478873241.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:21.965Z,1478873241.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:22.260Z,1478873242.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:22.369Z,1478873242.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:22.770Z,1478873242.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:23.056Z,1478873243.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:23.181Z,1478873243.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:23.578Z,1478873243.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:23.760Z,1478873243.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:23.964Z,1478873243.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:24.369Z,1478873244.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:24.556Z,1478873244.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:24.762Z,1478873244.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:25.150Z,1478873245.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:25.353Z,1478873245.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:25.578Z,1478873245.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:25.768Z,1478873245.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:25.976Z,1478873245.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:26.351Z,1478873246.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:26.564Z,1478873246.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:26.773Z,1478873246.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:27.167Z,1478873247.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:27.361Z,1478873247.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:27.550Z,1478873247.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:27.772Z,1478873247.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:27.962Z,1478873247.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:28.380Z,1478873248.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:28.568Z,1478873248.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:28.775Z,1478873248.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:29.157Z,1478873249.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:29.365Z,1478873249.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:29.577Z,1478873249.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:29.776Z,1478873249.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:29.982Z,1478873249.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:30.385Z,1478873250.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:30.572Z,1478873250.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:30.757Z,1478873250.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:31.218Z,1478873251.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:31.368Z,1478873251.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:31.567Z,1478873251.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:31.848Z,1478873251.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:31.988Z,1478873251.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:32.369Z,1478873252.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:32.644Z,1478873252.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:32.798Z,1478873252.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:33.173Z,1478873253.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:33.442Z,1478873253.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:33.580Z,1478873253.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:33.961Z,1478873253.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:34.204Z,1478873254.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:34.362Z,1478873254.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:34.754Z,1478873254.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:35.000Z,1478873255.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:35.178Z,1478873255.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:35.564Z,1478873255.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:35.797Z,1478873255.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:35.965Z,1478873255.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:36.208Z,1478873256.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:36.387Z,1478873256.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:36.814Z,1478873256.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:37.004Z,1478873257.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:37.186Z,1478873257.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:37.585Z,1478873257.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:37.736Z,1478873257.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:37.977Z,1478873257.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:38.363Z,1478873258.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:38.532Z,1478873258.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:38.777Z,1478873258.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:39.166Z,1478873259.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:39.328Z,1478873259.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:39.581Z,1478873259.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:39.744Z,1478873259.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:39.976Z,1478873259.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:40.386Z,1478873260.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:40.540Z,1478873260.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:40.762Z,1478873260.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:41.165Z,1478873261.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:41.337Z,1478873261.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:41.561Z,1478873261.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:41.748Z,1478873261.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:41.998Z,1478873261.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:42.358Z,1478873262.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:42.544Z,1478873262.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:42.759Z,1478873262.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:43.163Z,1478873263.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:43.344Z,1478873263.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:43.563Z,1478873263.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:43.756Z,1478873263.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:43.961Z,1478873263.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:44.342Z,1478873264.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:44.552Z,1478873264.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:44.769Z,1478873264.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:45.177Z,1478873265.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:45.348Z,1478873265.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:45.571Z,1478873265.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:45.836Z,1478873265.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:46.030Z,1478873266.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:46.366Z,1478873266.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:46.633Z,1478873266.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:46.770Z,1478873266.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:47.428Z,1478873267.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:48.188Z,1478873268.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:48.984Z,1478873268.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:49.781Z,1478873269.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:50.192Z,1478873270.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:50.988Z,1478873270.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:51.728Z,1478873271.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:52.524Z,1478873272.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:53.321Z,1478873273.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:53.736Z,1478873273.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:53.966Z,1478873273.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:54.078Z,1478873274.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:54.469Z,1478873274.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:54.532Z,1478873274.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:54.885Z,1478873274.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:55.230Z,1478873275.230 [PNI_TCM](ERROR): CRC does not match. Expected:0x1014 got:0x24853
2016-11-11T14:07:55.306Z,1478873275.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:55.329Z,1478873275.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:55.642Z,1478873275.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:55.740Z,1478873275.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:56.044Z,1478873276.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:56.444Z,1478873276.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:56.536Z,1478873276.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:56.881Z,1478873276.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:57.247Z,1478873277.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:57.332Z,1478873277.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:57.641Z,1478873277.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:57.740Z,1478873277.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:58.083Z,1478873278.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:58.438Z,1478873278.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:58.536Z,1478873278.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:58.842Z,1478873278.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:59.249Z,1478873279.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:59.332Z,1478873279.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:07:59.663Z,1478873279.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:07:59.812Z,1478873279.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:00.032Z,1478873280.032 [PNI_TCM](ERROR): CRC does not match. Expected:0x50898 got:0x48991
2016-11-11T14:08:00.076Z,1478873280.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:00.474Z,1478873280.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:00.608Z,1478873280.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:00.843Z,1478873280.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:01.241Z,1478873281.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:01.404Z,1478873281.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:01.671Z,1478873281.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:02.045Z,1478873282.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:02.164Z,1478873282.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:02.445Z,1478873282.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:02.864Z,1478873282.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:02.960Z,1478873282.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:03.265Z,1478873283.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:03.646Z,1478873283.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:03.757Z,1478873283.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:04.037Z,1478873284.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:04.168Z,1478873284.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:04.445Z,1478873284.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:04.847Z,1478873284.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:04.964Z,1478873284.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:05.241Z,1478873285.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:05.655Z,1478873285.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:05.708Z,1478873285.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:06.044Z,1478873286.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:06.446Z,1478873286.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:06.504Z,1478873286.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:07.009Z,1478873287.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:07.301Z,1478873287.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:07.327Z,1478873287.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:07.663Z,1478873287.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:07.712Z,1478873287.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:08.065Z,1478873288.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:08.459Z,1478873288.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:08.508Z,1478873288.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:08.883Z,1478873288.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:09.239Z,1478873289.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:09.304Z,1478873289.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:09.697Z,1478873289.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:09.716Z,1478873289.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:10.042Z,1478873290.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:10.449Z,1478873290.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:10.512Z,1478873290.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:10.856Z,1478873290.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:11.299Z,1478873291.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:11.308Z,1478873291.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:11.665Z,1478873291.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:11.716Z,1478873291.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:12.037Z,1478873292.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:12.449Z,1478873292.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:12.512Z,1478873292.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:12.845Z,1478873292.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:13.250Z,1478873293.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:13.308Z,1478873293.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:13.665Z,1478873293.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:13.820Z,1478873293.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:14.079Z,1478873294.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:14.441Z,1478873294.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:14.616Z,1478873294.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:14.841Z,1478873294.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:15.240Z,1478873295.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:15.412Z,1478873295.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:15.666Z,1478873295.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:16.063Z,1478873296.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:16.164Z,1478873296.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:16.449Z,1478873296.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:16.861Z,1478873296.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:16.960Z,1478873296.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:17.262Z,1478873297.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:17.637Z,1478873297.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:17.757Z,1478873297.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:18.041Z,1478873298.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:18.168Z,1478873298.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:18.442Z,1478873298.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:18.844Z,1478873298.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:18.965Z,1478873298.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:19.308Z,1478873299.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:19.645Z,1478873299.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:19.696Z,1478873299.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:20.065Z,1478873300.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:20.451Z,1478873300.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:20.492Z,1478873300.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:20.849Z,1478873300.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:21.289Z,1478873301.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:21.338Z,1478873301.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:21.673Z,1478873301.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:21.700Z,1478873301.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:22.050Z,1478873302.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:22.485Z,1478873302.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:22.496Z,1478873302.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:22.850Z,1478873302.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:23.292Z,1478873303.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:23.334Z,1478873303.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:23.650Z,1478873303.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:23.700Z,1478873303.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:24.088Z,1478873304.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:24.449Z,1478873304.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:24.496Z,1478873304.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:24.857Z,1478873304.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:25.292Z,1478873305.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:25.296Z,1478873305.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:25.642Z,1478873305.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:26.041Z,1478873306.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:26.088Z,1478873306.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:26.445Z,1478873306.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:26.845Z,1478873306.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:26.884Z,1478873306.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:27.248Z,1478873307.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:27.639Z,1478873307.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:27.680Z,1478873307.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:28.043Z,1478873308.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:28.088Z,1478873308.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:28.449Z,1478873308.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:28.841Z,1478873308.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:28.884Z,1478873308.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:29.249Z,1478873309.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:29.662Z,1478873309.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:29.681Z,1478873309.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:30.037Z,1478873310.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:30.136Z,1478873310.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:30.478Z,1478873310.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:30.845Z,1478873310.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:30.932Z,1478873310.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:31.248Z,1478873311.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:31.649Z,1478873311.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:31.729Z,1478873311.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:32.037Z,1478873312.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:32.149Z,1478873312.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:32.441Z,1478873312.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:32.841Z,1478873312.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:32.944Z,1478873312.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:33.303Z,1478873313.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:33.649Z,1478873313.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:33.688Z,1478873313.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:34.049Z,1478873314.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:34.454Z,1478873314.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:34.484Z,1478873314.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:34.869Z,1478873314.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:35.280Z,1478873315.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:35.302Z,1478873315.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:35.669Z,1478873315.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:35.688Z,1478873315.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:36.090Z,1478873316.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:36.438Z,1478873316.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:36.484Z,1478873316.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:36.881Z,1478873316.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:37.280Z,1478873317.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:37.288Z,1478873317.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:37.674Z,1478873317.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:37.688Z,1478873317.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:38.037Z,1478873318.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:38.464Z,1478873318.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:38.484Z,1478873318.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:38.845Z,1478873318.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:39.280Z,1478873319.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:39.334Z,1478873319.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:39.641Z,1478873319.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:39.688Z,1478873319.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:40.049Z,1478873320.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:40.460Z,1478873320.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:40.484Z,1478873320.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:40.849Z,1478873320.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:41.202Z,1478873321.202 [NAL9602](INFO): SBD MO Status=2, MOMSN=348, MT Status=2, MTMSN=0
2016-11-11T14:08:41.202Z,1478873321.202 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T14:08:41.271Z,1478873321.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:41.280Z,1478873321.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:41.678Z,1478873321.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:41.740Z,1478873321.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:42.039Z,1478873322.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:42.445Z,1478873322.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:42.536Z,1478873322.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:42.869Z,1478873322.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:43.248Z,1478873323.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:43.332Z,1478873323.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:43.673Z,1478873323.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:44.057Z,1478873324.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:44.124Z,1478873324.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:44.449Z,1478873324.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:44.837Z,1478873324.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:44.920Z,1478873324.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:45.237Z,1478873325.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:45.647Z,1478873325.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:45.717Z,1478873325.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:45.721Z,1478873325.721 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T14:03:45.6Z
2016-11-11T14:08:45.721Z,1478873325.721 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T14:08:45.721Z,1478873325.721 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T14:08:46.073Z,1478873326.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:46.512Z,1478873326.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:46.953Z,1478873326.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:47.080Z,1478873327.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:47.308Z,1478873327.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:47.716Z,1478873327.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:48.512Z,1478873328.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:49.308Z,1478873329.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:50.104Z,1478873330.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:50.512Z,1478873330.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:50.669Z,1478873330.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:50.723Z,1478873330.723 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0216.lzma
2016-11-11T14:08:50.793Z,1478873330.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:51.212Z,1478873331.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:51.308Z,1478873331.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:51.526Z,1478873331.526 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0216.lzma.bak
2016-11-11T14:08:51.526Z,1478873331.526 [DataOverHttps](INFO): SBD MOMSN=4555473
2016-11-11T14:08:51.592Z,1478873331.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:51.716Z,1478873331.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:52.512Z,1478873332.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:52.826Z,1478873332.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:52.962Z,1478873332.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:53.308Z,1478873333.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:53.716Z,1478873333.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:54.512Z,1478873334.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:55.312Z,1478873335.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:55.724Z,1478873335.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:56.377Z,1478873336.377 [BPC1](ERROR): Failed to receive battery data
2016-11-11T14:08:56.377Z,1478873336.377 [BPC1] Communications Fault, FailCount= 1
2016-11-11T14:08:56.377Z,1478873336.377 [BPC1](ERROR): Communications Fault
2016-11-11T14:08:56.385Z,1478873336.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:56.404Z,1478873336.404 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T14:08:56.520Z,1478873336.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:56.525Z,1478873336.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:56.859Z,1478873336.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:57.258Z,1478873337.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:57.278Z,1478873337.278 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:08:57.278Z,1478873337.278 [BPC1] No Fault, FailCount= 1
2016-11-11T14:08:57.316Z,1478873337.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:57.805Z,1478873337.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:58.060Z,1478873338.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:08:58.112Z,1478873338.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:58.908Z,1478873338.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:08:59.704Z,1478873339.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:00.112Z,1478873340.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:00.908Z,1478873340.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:01.596Z,1478873341.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:01.709Z,1478873341.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:01.759Z,1478873341.759 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20161111T044527/Express0217.lzma
2016-11-11T14:09:01.837Z,1478873341.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:02.193Z,1478873342.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:02.392Z,1478873342.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:02.541Z,1478873342.541 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0217.lzma.bak
2016-11-11T14:09:02.541Z,1478873342.541 [DataOverHttps](INFO): SBD MOMSN=4555475
2016-11-11T14:09:02.609Z,1478873342.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:03.189Z,1478873343.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:03.600Z,1478873343.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:03.989Z,1478873343.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:03.998Z,1478873343.998 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T14:09:03.998Z,1478873343.998 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T14:09:03.998Z,1478873343.998 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T14:09:04.117Z,1478873344.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:04.396Z,1478873344.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:05.193Z,1478873345.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:05.604Z,1478873345.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:06.400Z,1478873346.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:07.197Z,1478873347.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:07.608Z,1478873347.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:07.664Z,1478873347.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:07.796Z,1478873347.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:08.179Z,1478873348.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:08.404Z,1478873348.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:08.575Z,1478873348.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:08.980Z,1478873348.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:09.202Z,1478873349.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:09.380Z,1478873349.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:09.680Z,1478873349.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:09.781Z,1478873349.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:10.186Z,1478873350.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:10.476Z,1478873350.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:10.581Z,1478873350.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:10.981Z,1478873350.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:11.272Z,1478873351.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:11.378Z,1478873351.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:11.789Z,1478873351.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:12.036Z,1478873352.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:12.181Z,1478873352.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:12.621Z,1478873352.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:12.832Z,1478873352.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:12.977Z,1478873352.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:13.377Z,1478873353.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:13.629Z,1478873353.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:13.810Z,1478873353.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:14.040Z,1478873354.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:14.181Z,1478873354.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:14.610Z,1478873354.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:14.836Z,1478873354.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:15.003Z,1478873355.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:15.379Z,1478873355.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:15.564Z,1478873355.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:15.781Z,1478873355.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:16.185Z,1478873356.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:16.360Z,1478873356.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:16.589Z,1478873356.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:16.988Z,1478873356.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:17.157Z,1478873357.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:17.381Z,1478873357.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:17.576Z,1478873357.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:17.785Z,1478873357.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:18.192Z,1478873358.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:18.372Z,1478873358.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:18.578Z,1478873358.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:18.989Z,1478873358.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:19.169Z,1478873359.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:19.385Z,1478873359.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:19.580Z,1478873359.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:19.781Z,1478873359.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:20.185Z,1478873360.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:20.376Z,1478873360.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:20.585Z,1478873360.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:20.982Z,1478873360.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:21.173Z,1478873361.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:21.381Z,1478873361.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:21.584Z,1478873361.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:21.785Z,1478873361.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:22.182Z,1478873362.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:22.380Z,1478873362.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:22.585Z,1478873362.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:22.987Z,1478873362.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:23.176Z,1478873363.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:23.389Z,1478873363.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:23.662Z,1478873363.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:23.778Z,1478873363.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:24.189Z,1478873364.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:24.456Z,1478873364.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:24.584Z,1478873364.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:24.981Z,1478873364.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:25.254Z,1478873365.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:25.398Z,1478873365.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:25.797Z,1478873365.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:26.048Z,1478873366.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:26.177Z,1478873366.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:26.569Z,1478873366.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:26.844Z,1478873366.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:26.997Z,1478873366.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:27.377Z,1478873367.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:27.640Z,1478873367.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:27.777Z,1478873367.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:28.197Z,1478873368.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:28.436Z,1478873368.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:28.577Z,1478873368.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:29.005Z,1478873369.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:29.232Z,1478873369.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:29.409Z,1478873369.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:29.809Z,1478873369.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:30.028Z,1478873370.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:30.173Z,1478873370.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:30.577Z,1478873370.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:30.824Z,1478873370.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:30.942Z,1478873370.942 [NAL9602](INFO): SBD MO Status=2, MOMSN=348, MT Status=2, MTMSN=0
2016-11-11T14:09:30.942Z,1478873370.942 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T14:09:30.981Z,1478873370.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:31.341Z,1478873371.341 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T14:09:31.373Z,1478873371.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:31.620Z,1478873371.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:31.781Z,1478873371.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:32.193Z,1478873372.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:32.416Z,1478873372.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:32.576Z,1478873372.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:32.972Z,1478873372.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:33.212Z,1478873373.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:33.394Z,1478873373.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:33.777Z,1478873373.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:34.008Z,1478873374.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:34.176Z,1478873374.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:34.573Z,1478873374.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:34.804Z,1478873374.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:34.977Z,1478873374.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:35.368Z,1478873375.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:35.600Z,1478873375.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:35.767Z,1478873375.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:36.177Z,1478873376.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:36.396Z,1478873376.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:36.577Z,1478873376.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:36.945Z,1478873376.945 [NAL9602](INFO): Powering down
2016-11-11T14:09:36.979Z,1478873376.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:37.192Z,1478873377.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:37.377Z,1478873377.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:37.809Z,1478873377.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:37.988Z,1478873377.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:38.177Z,1478873378.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:38.577Z,1478873378.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:38.784Z,1478873378.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:38.968Z,1478873378.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:39.377Z,1478873379.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:39.580Z,1478873379.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:39.785Z,1478873379.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:40.197Z,1478873380.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:40.376Z,1478873380.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:40.569Z,1478873380.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:40.973Z,1478873380.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:41.172Z,1478873381.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:41.432Z,1478873381.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:41.794Z,1478873381.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:41.968Z,1478873381.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:42.177Z,1478873382.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:42.568Z,1478873382.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:42.764Z,1478873382.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:43.010Z,1478873383.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:43.367Z,1478873383.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:43.560Z,1478873383.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:43.809Z,1478873383.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:44.194Z,1478873384.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:44.356Z,1478873384.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:44.602Z,1478873384.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:44.764Z,1478873384.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:45.013Z,1478873385.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:45.172Z,1478873385.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:45.381Z,1478873385.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:45.580Z,1478873385.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:45.789Z,1478873385.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:45.988Z,1478873385.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:46.181Z,1478873386.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:46.396Z,1478873386.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:46.581Z,1478873386.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:46.804Z,1478873386.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:46.993Z,1478873386.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:47.212Z,1478873387.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:47.376Z,1478873387.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:47.620Z,1478873387.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:47.781Z,1478873387.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:48.028Z,1478873388.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:48.185Z,1478873388.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:48.436Z,1478873388.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:48.577Z,1478873388.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:48.844Z,1478873388.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:48.981Z,1478873388.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:49.252Z,1478873389.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:49.389Z,1478873389.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:49.660Z,1478873389.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:49.772Z,1478873389.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:50.171Z,1478873390.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:50.456Z,1478873390.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:50.577Z,1478873390.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:50.975Z,1478873390.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:51.262Z,1478873391.262 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:51.380Z,1478873391.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:51.672Z,1478873391.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:51.781Z,1478873391.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:52.179Z,1478873392.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:52.468Z,1478873392.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:52.585Z,1478873392.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:52.993Z,1478873392.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:53.264Z,1478873393.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:53.381Z,1478873393.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:53.793Z,1478873393.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:53.960Z,1478873393.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:54.181Z,1478873394.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:54.596Z,1478873394.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:54.756Z,1478873394.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:54.997Z,1478873394.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:55.397Z,1478873395.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:55.553Z,1478873395.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:55.807Z,1478873395.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:55.964Z,1478873395.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:56.179Z,1478873396.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:56.598Z,1478873396.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:56.760Z,1478873396.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:56.978Z,1478873396.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:57.411Z,1478873397.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:57.488Z,1478873397.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:57.781Z,1478873397.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:58.218Z,1478873398.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:58.284Z,1478873398.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:58.608Z,1478873398.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:58.979Z,1478873398.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:59.081Z,1478873399.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:59.380Z,1478873399.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:09:59.492Z,1478873399.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:09:59.774Z,1478873399.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:00.175Z,1478873400.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:00.288Z,1478873400.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:00.579Z,1478873400.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:00.985Z,1478873400.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:01.085Z,1478873401.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:01.376Z,1478873401.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:01.496Z,1478873401.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:01.776Z,1478873401.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:02.180Z,1478873402.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:02.292Z,1478873402.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:02.581Z,1478873402.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:02.982Z,1478873402.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:03.089Z,1478873403.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:03.391Z,1478873403.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:03.500Z,1478873403.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:03.792Z,1478873403.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:04.184Z,1478873404.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:04.296Z,1478873404.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:04.596Z,1478873404.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:05.092Z,1478873405.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:05.592Z,1478873405.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:06.388Z,1478873406.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:07.184Z,1478873407.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:07.952Z,1478873407.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:08.113Z,1478873408.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:08.256Z,1478873408.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:08.665Z,1478873408.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:08.748Z,1478873408.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:09.065Z,1478873409.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:09.477Z,1478873409.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:09.545Z,1478873409.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:09.855Z,1478873409.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:09.956Z,1478873409.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:10.301Z,1478873410.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:10.655Z,1478873410.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:10.752Z,1478873410.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:11.117Z,1478873411.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:11.464Z,1478873411.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:11.492Z,1478873411.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:11.885Z,1478873411.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:12.277Z,1478873412.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:12.288Z,1478873412.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:12.660Z,1478873412.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:13.085Z,1478873413.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:13.127Z,1478873413.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:13.463Z,1478873413.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:13.512Z,1478873413.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:13.865Z,1478873413.865 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:13.865Z,1478873413.865 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 167
2016-11-11T14:10:13.866Z,1478873413.866 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:10:13.877Z,1478873413.876 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:13.877Z,1478873413.877 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 167
2016-11-11T14:10:13.877Z,1478873413.877 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:10:13.879Z,1478873413.879 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:13.879Z,1478873413.879 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 167
2016-11-11T14:10:13.883Z,1478873413.883 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:10:13.910Z,1478873413.910 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:10:13.910Z,1478873413.910 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:10:13.910Z,1478873413.910 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:10:14.290Z,1478873414.290 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:10:14.290Z,1478873414.290 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 167
2016-11-11T14:10:14.291Z,1478873414.291 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:10:14.291Z,1478873414.291 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 167
2016-11-11T14:10:14.296Z,1478873414.296 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:10:14.296Z,1478873414.296 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 167
2016-11-11T14:10:14.308Z,1478873414.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:14.655Z,1478873414.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:10:14.656Z,1478873414.656 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:10:14.656Z,1478873414.656 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:10:14.673Z,1478873414.673 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:10:14.673Z,1478873414.673 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:10:14.674Z,1478873414.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:10:14.674Z,1478873414.674 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:10:14.674Z,1478873414.674 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:10:14.675Z,1478873414.675 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:10:15.102Z,1478873415.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:15.104Z,1478873415.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:15.451Z,1478873415.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:15.512Z,1478873415.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:15.850Z,1478873415.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:16.252Z,1478873416.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:16.308Z,1478873416.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:16.651Z,1478873416.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:17.104Z,1478873417.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:17.103Z,1478873417.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:17.458Z,1478873417.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:17.512Z,1478873417.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:17.854Z,1478873417.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:18.261Z,1478873418.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:18.308Z,1478873418.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:18.660Z,1478873418.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:19.054Z,1478873419.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:19.104Z,1478873419.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:19.469Z,1478873419.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:19.572Z,1478873419.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:19.865Z,1478873419.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:20.248Z,1478873420.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:20.368Z,1478873420.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:20.651Z,1478873420.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:21.055Z,1478873421.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:21.164Z,1478873421.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:21.451Z,1478873421.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:21.861Z,1478873421.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:21.924Z,1478873421.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:22.265Z,1478873422.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:22.685Z,1478873422.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:22.720Z,1478873422.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:23.070Z,1478873423.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:23.470Z,1478873423.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:23.516Z,1478873423.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:23.852Z,1478873423.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:23.944Z,1478873423.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:24.294Z,1478873424.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:24.665Z,1478873424.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:24.740Z,1478873424.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:25.138Z,1478873425.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:25.454Z,1478873425.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:25.496Z,1478873425.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:25.901Z,1478873425.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:26.287Z,1478873426.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:26.292Z,1478873426.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:26.655Z,1478873426.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:27.088Z,1478873427.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:27.104Z,1478873427.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:27.461Z,1478873427.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:27.504Z,1478873427.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:27.853Z,1478873427.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:28.255Z,1478873428.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:28.300Z,1478873428.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:28.664Z,1478873428.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:29.096Z,1478873429.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:29.110Z,1478873429.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:29.446Z,1478873429.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:29.504Z,1478873429.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:29.850Z,1478873429.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:30.250Z,1478873430.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:30.300Z,1478873430.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:30.651Z,1478873430.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:31.096Z,1478873431.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:31.147Z,1478873431.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:31.452Z,1478873431.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:31.504Z,1478873431.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:31.857Z,1478873431.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:32.251Z,1478873432.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:32.300Z,1478873432.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:32.657Z,1478873432.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:33.057Z,1478873433.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:33.096Z,1478873433.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:33.465Z,1478873433.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:33.540Z,1478873433.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:33.853Z,1478873433.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:34.261Z,1478873434.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:34.336Z,1478873434.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:34.652Z,1478873434.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:35.065Z,1478873435.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:35.132Z,1478873435.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:35.506Z,1478873435.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:35.860Z,1478873435.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:35.924Z,1478873435.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:36.259Z,1478873436.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:36.660Z,1478873436.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:36.720Z,1478873436.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:37.109Z,1478873437.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:37.514Z,1478873437.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:37.516Z,1478873437.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:37.857Z,1478873437.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:37.928Z,1478873437.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:38.289Z,1478873438.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:38.650Z,1478873438.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:38.725Z,1478873438.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:39.103Z,1478873439.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:39.460Z,1478873439.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:39.492Z,1478873439.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:39.864Z,1478873439.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:40.256Z,1478873440.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:40.292Z,1478873440.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:40.688Z,1478873440.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:41.052Z,1478873441.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:41.084Z,1478873441.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:41.449Z,1478873441.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:41.468Z,1478873441.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:41.849Z,1478873441.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:42.249Z,1478873442.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:42.264Z,1478873442.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:42.653Z,1478873442.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:43.060Z,1478873443.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:43.105Z,1478873443.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:43.454Z,1478873443.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:43.468Z,1478873443.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:43.857Z,1478873443.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:44.251Z,1478873444.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:44.264Z,1478873444.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:44.657Z,1478873444.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:45.060Z,1478873445.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:45.100Z,1478873445.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:45.461Z,1478873445.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:45.468Z,1478873445.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:45.859Z,1478873445.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:46.260Z,1478873446.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:46.264Z,1478873446.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:46.660Z,1478873446.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:47.060Z,1478873447.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:47.064Z,1478873447.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:47.464Z,1478873447.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:47.532Z,1478873447.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:47.856Z,1478873447.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:48.271Z,1478873448.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:48.328Z,1478873448.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:48.672Z,1478873448.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:49.044Z,1478873449.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:49.124Z,1478873449.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:49.507Z,1478873449.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:49.857Z,1478873449.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:49.888Z,1478873449.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:50.252Z,1478873450.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:50.650Z,1478873450.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:50.684Z,1478873450.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:51.052Z,1478873451.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:51.480Z,1478873451.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:51.558Z,1478873451.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:51.863Z,1478873451.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:51.904Z,1478873451.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:52.264Z,1478873452.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:52.664Z,1478873452.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:52.700Z,1478873452.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:53.129Z,1478873453.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:53.436Z,1478873453.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:53.449Z,1478873453.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:53.881Z,1478873453.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:54.232Z,1478873454.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:54.252Z,1478873454.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:54.687Z,1478873454.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:55.028Z,1478873455.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:55.105Z,1478873455.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:55.436Z,1478873455.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:55.452Z,1478873455.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:55.851Z,1478873455.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:56.232Z,1478873456.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:56.258Z,1478873456.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:56.650Z,1478873456.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:57.028Z,1478873457.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:57.093Z,1478873457.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:57.436Z,1478873457.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:57.469Z,1478873457.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:57.859Z,1478873457.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:58.232Z,1478873458.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:58.269Z,1478873458.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:58.660Z,1478873458.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:59.030Z,1478873459.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:59.070Z,1478873459.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:59.456Z,1478873459.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:10:59.475Z,1478873459.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:10:59.869Z,1478873459.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:00.249Z,1478873460.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:00.260Z,1478873460.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:00.649Z,1478873460.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:01.053Z,1478873461.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:01.092Z,1478873461.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:01.454Z,1478873461.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:01.524Z,1478873461.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:01.854Z,1478873461.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:02.256Z,1478873462.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:02.320Z,1478873462.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:02.661Z,1478873462.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:03.055Z,1478873463.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:03.116Z,1478873463.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:03.505Z,1478873463.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:03.856Z,1478873463.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:03.888Z,1478873463.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:04.269Z,1478873464.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:04.649Z,1478873464.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:04.684Z,1478873464.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:05.480Z,1478873465.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:05.888Z,1478873465.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:06.684Z,1478873466.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:07.404Z,1478873467.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:08.200Z,1478873468.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:08.213Z,1478873468.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:08.349Z,1478873468.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:08.717Z,1478873468.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:09.006Z,1478873469.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:09.165Z,1478873469.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:09.420Z,1478873469.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:09.525Z,1478873469.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:09.955Z,1478873469.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:10.216Z,1478873470.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:10.357Z,1478873470.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:10.716Z,1478873470.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:11.012Z,1478873471.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:11.123Z,1478873471.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:11.420Z,1478873471.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:11.521Z,1478873471.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:11.917Z,1478873471.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:12.216Z,1478873472.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:12.321Z,1478873472.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:12.721Z,1478873472.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:13.012Z,1478873473.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:13.124Z,1478873473.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:13.420Z,1478873473.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:13.524Z,1478873473.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:13.927Z,1478873473.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:14.216Z,1478873474.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:14.318Z,1478873474.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:14.725Z,1478873474.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:15.012Z,1478873475.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:15.163Z,1478873475.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:15.508Z,1478873475.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:15.529Z,1478873475.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:15.928Z,1478873475.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:16.304Z,1478873476.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:16.334Z,1478873476.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:16.730Z,1478873476.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:17.100Z,1478873477.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:17.113Z,1478873477.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:17.516Z,1478873477.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:17.836Z,1478873477.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:17.925Z,1478873477.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:18.315Z,1478873478.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:18.632Z,1478873478.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:18.725Z,1478873478.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:19.120Z,1478873479.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:19.429Z,1478873479.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:19.520Z,1478873479.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:19.840Z,1478873479.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:19.919Z,1478873479.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:20.319Z,1478873480.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:20.636Z,1478873480.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:20.723Z,1478873480.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:21.177Z,1478873481.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:21.364Z,1478873481.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:21.524Z,1478873481.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:21.921Z,1478873481.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:22.160Z,1478873482.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:22.353Z,1478873482.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:22.713Z,1478873482.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:22.957Z,1478873482.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:23.145Z,1478873483.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:23.368Z,1478873483.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:23.517Z,1478873483.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:23.949Z,1478873483.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:24.164Z,1478873484.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:24.339Z,1478873484.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:24.717Z,1478873484.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:24.969Z,1478873484.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:25.117Z,1478873485.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:25.384Z,1478873485.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:25.525Z,1478873485.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:25.921Z,1478873485.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:26.180Z,1478873486.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:26.315Z,1478873486.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:26.726Z,1478873486.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:26.977Z,1478873486.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:27.117Z,1478873487.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:27.388Z,1478873487.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:27.516Z,1478873487.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:27.921Z,1478873487.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:28.184Z,1478873488.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:28.321Z,1478873488.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:28.717Z,1478873488.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:28.980Z,1478873488.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:29.126Z,1478873489.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:29.460Z,1478873489.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:29.528Z,1478873489.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:29.924Z,1478873489.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:30.256Z,1478873490.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:30.327Z,1478873490.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:30.722Z,1478873490.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:31.052Z,1478873491.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:31.128Z,1478873491.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:31.528Z,1478873491.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:31.816Z,1478873491.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:31.928Z,1478873491.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:32.327Z,1478873492.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:32.612Z,1478873492.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:32.729Z,1478873492.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:33.128Z,1478873493.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:33.409Z,1478873493.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:33.520Z,1478873493.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:33.828Z,1478873493.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:33.924Z,1478873493.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:34.313Z,1478873494.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:34.624Z,1478873494.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:34.733Z,1478873494.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:35.137Z,1478873495.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:35.344Z,1478873495.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:35.537Z,1478873495.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:35.916Z,1478873495.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:36.140Z,1478873496.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:36.385Z,1478873496.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:36.728Z,1478873496.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:36.937Z,1478873496.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:37.129Z,1478873497.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:37.348Z,1478873497.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:37.538Z,1478873497.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:37.928Z,1478873497.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:38.144Z,1478873498.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:38.345Z,1478873498.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:38.741Z,1478873498.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:38.941Z,1478873498.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:39.113Z,1478873499.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:39.352Z,1478873499.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:39.514Z,1478873499.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:39.917Z,1478873499.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:40.148Z,1478873500.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:40.321Z,1478873500.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:40.715Z,1478873500.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:40.945Z,1478873500.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:41.120Z,1478873501.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:41.356Z,1478873501.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:41.521Z,1478873501.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:41.916Z,1478873501.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:42.152Z,1478873502.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:42.329Z,1478873502.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:42.726Z,1478873502.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:42.950Z,1478873502.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:43.119Z,1478873503.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:43.432Z,1478873503.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:43.518Z,1478873503.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:43.925Z,1478873503.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:44.228Z,1478873504.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:44.318Z,1478873504.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:44.721Z,1478873504.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:45.024Z,1478873505.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:45.127Z,1478873505.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:45.517Z,1478873505.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:45.796Z,1478873505.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:45.924Z,1478873505.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:46.325Z,1478873506.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:46.592Z,1478873506.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:46.725Z,1478873506.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:47.121Z,1478873507.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:47.389Z,1478873507.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:47.527Z,1478873507.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:47.802Z,1478873507.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:47.918Z,1478873507.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:48.321Z,1478873508.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:48.596Z,1478873508.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:48.726Z,1478873508.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:49.121Z,1478873509.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:49.320Z,1478873509.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:49.521Z,1478873509.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:49.926Z,1478873509.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:50.116Z,1478873510.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:50.328Z,1478873510.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:50.781Z,1478873510.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:50.913Z,1478873510.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:51.133Z,1478873511.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:51.328Z,1478873511.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:51.554Z,1478873511.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:51.921Z,1478873511.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:52.124Z,1478873512.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:52.338Z,1478873512.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:52.754Z,1478873512.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:52.921Z,1478873512.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:53.129Z,1478873513.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:53.332Z,1478873513.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:53.533Z,1478873513.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:53.915Z,1478873513.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:54.128Z,1478873514.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:54.321Z,1478873514.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:54.726Z,1478873514.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:54.928Z,1478873514.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:55.116Z,1478873515.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:55.352Z,1478873515.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:55.525Z,1478873515.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:55.925Z,1478873515.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:56.148Z,1478873516.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:56.317Z,1478873516.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:56.724Z,1478873516.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:56.944Z,1478873516.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:57.123Z,1478873517.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:57.424Z,1478873517.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:57.518Z,1478873517.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:57.921Z,1478873517.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:58.220Z,1478873518.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:58.325Z,1478873518.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:58.718Z,1478873518.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:59.016Z,1478873519.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:59.122Z,1478873519.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:59.522Z,1478873519.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:11:59.768Z,1478873519.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:11:59.925Z,1478873519.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:00.321Z,1478873520.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:00.564Z,1478873520.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:00.718Z,1478873520.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:01.118Z,1478873521.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:01.361Z,1478873521.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:01.529Z,1478873521.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:01.772Z,1478873521.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:01.918Z,1478873521.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:02.318Z,1478873522.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:02.568Z,1478873522.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:02.721Z,1478873522.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:03.129Z,1478873523.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:03.302Z,1478873523.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:03.518Z,1478873523.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:03.928Z,1478873523.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:04.096Z,1478873524.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:04.329Z,1478873524.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:04.769Z,1478873524.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:04.893Z,1478873524.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:05.304Z,1478873525.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:06.100Z,1478873526.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:06.896Z,1478873526.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:07.308Z,1478873527.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:08.069Z,1478873528.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:08.104Z,1478873528.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:08.208Z,1478873528.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:08.577Z,1478873528.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:08.900Z,1478873528.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:08.986Z,1478873528.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:09.321Z,1478873529.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:09.381Z,1478873529.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:09.772Z,1478873529.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:10.116Z,1478873530.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:10.149Z,1478873530.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:10.553Z,1478873530.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:10.912Z,1478873530.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:10.966Z,1478873530.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:11.337Z,1478873531.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:11.420Z,1478873531.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:11.737Z,1478873531.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:12.141Z,1478873532.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:12.216Z,1478873532.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:12.545Z,1478873532.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:12.945Z,1478873532.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:13.012Z,1478873533.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:13.393Z,1478873533.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:13.753Z,1478873533.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:13.776Z,1478873533.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:14.154Z,1478873534.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:14.537Z,1478873534.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:14.572Z,1478873534.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:14.937Z,1478873534.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:15.369Z,1478873535.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:15.398Z,1478873535.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:15.754Z,1478873535.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:15.780Z,1478873535.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:16.134Z,1478873536.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:16.536Z,1478873536.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:16.576Z,1478873536.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:16.962Z,1478873536.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:17.288Z,1478873537.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:17.358Z,1478873537.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:17.745Z,1478873537.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:18.084Z,1478873538.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:18.153Z,1478873538.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:18.553Z,1478873538.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:18.881Z,1478873538.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:18.978Z,1478873538.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:19.312Z,1478873539.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:19.369Z,1478873539.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:19.780Z,1478873539.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:20.108Z,1478873540.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:20.150Z,1478873540.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:20.569Z,1478873540.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:20.904Z,1478873540.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:20.994Z,1478873540.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:21.312Z,1478873541.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:21.387Z,1478873541.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:21.778Z,1478873541.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:22.108Z,1478873542.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:22.197Z,1478873542.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:22.554Z,1478873542.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:22.907Z,1478873542.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:22.970Z,1478873542.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:23.336Z,1478873543.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:23.384Z,1478873543.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:23.750Z,1478873543.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:24.132Z,1478873544.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:24.173Z,1478873544.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:24.567Z,1478873544.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:24.929Z,1478873544.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:25.032Z,1478873545.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:25.353Z,1478873545.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:25.392Z,1478873545.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:25.753Z,1478873545.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:26.140Z,1478873546.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:26.188Z,1478873546.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:26.558Z,1478873546.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:26.951Z,1478873546.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:26.984Z,1478873546.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:27.399Z,1478873547.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:27.751Z,1478873547.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:27.768Z,1478873547.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:28.172Z,1478873548.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:28.557Z,1478873548.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:28.564Z,1478873548.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:28.968Z,1478873548.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:29.360Z,1478873549.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:29.405Z,1478873549.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:29.745Z,1478873549.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:29.768Z,1478873549.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:30.166Z,1478873550.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:30.557Z,1478873550.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:30.564Z,1478873550.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:30.995Z,1478873550.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:31.257Z,1478873551.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:31.357Z,1478873551.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:31.761Z,1478873551.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:32.058Z,1478873552.058 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:32.147Z,1478873552.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:32.561Z,1478873552.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:32.856Z,1478873552.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:32.990Z,1478873552.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:33.268Z,1478873553.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:33.359Z,1478873553.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:33.770Z,1478873553.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:34.066Z,1478873554.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:34.182Z,1478873554.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:34.570Z,1478873554.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:34.861Z,1478873554.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:34.971Z,1478873554.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:35.272Z,1478873555.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:35.373Z,1478873555.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:35.754Z,1478873555.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:36.068Z,1478873556.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:36.161Z,1478873556.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:36.569Z,1478873556.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:36.865Z,1478873556.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:37.022Z,1478873557.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:37.276Z,1478873557.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:37.378Z,1478873557.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:37.777Z,1478873557.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:38.072Z,1478873558.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:38.142Z,1478873558.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:38.561Z,1478873558.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:38.868Z,1478873558.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:39.073Z,1478873559.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:39.360Z,1478873559.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:39.375Z,1478873559.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:39.753Z,1478873559.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:40.156Z,1478873560.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:40.158Z,1478873560.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:40.558Z,1478873560.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:40.952Z,1478873560.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:40.961Z,1478873560.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:41.350Z,1478873561.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:41.748Z,1478873561.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:41.782Z,1478873561.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:42.156Z,1478873562.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:42.169Z,1478873562.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:42.585Z,1478873562.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:42.946Z,1478873562.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:42.976Z,1478873562.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:43.353Z,1478873563.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:43.757Z,1478873563.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:43.768Z,1478873563.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:44.152Z,1478873564.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:44.562Z,1478873564.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:44.564Z,1478873564.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:44.958Z,1478873564.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:45.232Z,1478873565.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:45.337Z,1478873565.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:45.741Z,1478873565.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:46.028Z,1478873566.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:46.137Z,1478873566.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:46.545Z,1478873566.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:46.825Z,1478873566.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:46.941Z,1478873566.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:47.236Z,1478873567.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:47.377Z,1478873567.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:47.743Z,1478873567.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:48.032Z,1478873568.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:48.148Z,1478873568.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:48.544Z,1478873568.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:48.829Z,1478873568.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:48.942Z,1478873568.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:49.240Z,1478873569.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:49.350Z,1478873569.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:49.744Z,1478873569.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:50.036Z,1478873570.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:50.152Z,1478873570.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:50.545Z,1478873570.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:50.833Z,1478873570.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:50.942Z,1478873570.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:51.244Z,1478873571.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:51.381Z,1478873571.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:51.737Z,1478873571.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:52.040Z,1478873572.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:52.162Z,1478873572.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:52.540Z,1478873572.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:52.836Z,1478873572.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:53.001Z,1478873573.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:53.356Z,1478873573.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:53.368Z,1478873573.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:53.736Z,1478873573.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:54.136Z,1478873574.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:54.152Z,1478873574.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:54.532Z,1478873574.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:54.936Z,1478873574.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:54.948Z,1478873574.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:55.352Z,1478873575.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:55.684Z,1478873575.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:55.741Z,1478873575.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:56.132Z,1478873576.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:56.480Z,1478873576.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:56.535Z,1478873576.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:56.936Z,1478873576.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:57.277Z,1478873577.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:57.350Z,1478873577.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:57.688Z,1478873577.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:57.737Z,1478873577.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:58.136Z,1478873578.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:58.484Z,1478873578.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:58.536Z,1478873578.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:58.937Z,1478873578.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:59.208Z,1478873579.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:12:59.361Z,1478873579.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:12:59.736Z,1478873579.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:00.004Z,1478873580.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:00.141Z,1478873580.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:00.536Z,1478873580.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:00.801Z,1478873580.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:00.937Z,1478873580.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:01.212Z,1478873581.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:01.345Z,1478873581.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:01.741Z,1478873581.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:02.008Z,1478873582.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:02.133Z,1478873582.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:02.536Z,1478873582.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:02.817Z,1478873582.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:02.946Z,1478873582.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:03.236Z,1478873583.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:03.336Z,1478873583.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:03.753Z,1478873583.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:04.032Z,1478873584.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:04.137Z,1478873584.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:04.536Z,1478873584.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:04.828Z,1478873584.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:04.942Z,1478873584.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:05.236Z,1478873585.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:06.032Z,1478873586.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:06.828Z,1478873586.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:07.300Z,1478873587.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:08.096Z,1478873588.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:08.473Z,1478873588.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:08.593Z,1478873588.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:08.892Z,1478873588.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:08.977Z,1478873588.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:09.340Z,1478873589.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:09.668Z,1478873589.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:09.777Z,1478873589.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:10.166Z,1478873590.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:10.464Z,1478873590.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:10.545Z,1478873590.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:10.946Z,1478873590.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:11.261Z,1478873591.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:11.345Z,1478873591.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:11.672Z,1478873591.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:11.745Z,1478873591.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:12.145Z,1478873592.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:12.468Z,1478873592.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:12.545Z,1478873592.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:12.940Z,1478873592.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:13.188Z,1478873593.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:13.345Z,1478873593.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:13.745Z,1478873593.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:13.984Z,1478873593.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:14.144Z,1478873594.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:14.545Z,1478873594.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:14.781Z,1478873594.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:14.953Z,1478873594.953 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:14.953Z,1478873594.953 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 168
2016-11-11T14:13:14.953Z,1478873594.954 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:13:14.960Z,1478873594.960 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:14.960Z,1478873594.960 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 168
2016-11-11T14:13:14.960Z,1478873594.960 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:13:14.962Z,1478873594.962 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:14.962Z,1478873594.963 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 168
2016-11-11T14:13:14.963Z,1478873594.963 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:13:14.977Z,1478873594.977 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:13:14.977Z,1478873594.977 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:13:14.978Z,1478873594.977 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:13:15.192Z,1478873595.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:15.381Z,1478873595.381 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:13:15.381Z,1478873595.381 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 168
2016-11-11T14:13:15.382Z,1478873595.382 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:13:15.382Z,1478873595.382 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 168
2016-11-11T14:13:15.383Z,1478873595.383 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:13:15.383Z,1478873595.383 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 168
2016-11-11T14:13:15.752Z,1478873595.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:13:15.753Z,1478873595.753 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:13:15.753Z,1478873595.753 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:13:15.762Z,1478873595.762 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:13:15.762Z,1478873595.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:13:15.767Z,1478873595.767 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:13:15.767Z,1478873595.767 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:13:15.768Z,1478873595.768 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:13:15.768Z,1478873595.768 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:13:15.989Z,1478873595.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:16.206Z,1478873596.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:16.553Z,1478873596.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:16.785Z,1478873596.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:16.953Z,1478873596.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:17.196Z,1478873597.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:17.353Z,1478873597.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:17.753Z,1478873597.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:17.992Z,1478873597.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:18.154Z,1478873598.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:18.566Z,1478873598.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:18.789Z,1478873598.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:18.954Z,1478873598.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:19.201Z,1478873599.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:19.354Z,1478873599.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:19.749Z,1478873599.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:19.996Z,1478873599.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:20.193Z,1478873600.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:20.554Z,1478873600.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:20.792Z,1478873600.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:20.976Z,1478873600.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:21.284Z,1478873601.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:21.357Z,1478873601.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:21.801Z,1478873601.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:22.080Z,1478873602.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:22.181Z,1478873602.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:22.545Z,1478873602.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:22.876Z,1478873602.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:22.965Z,1478873602.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:23.381Z,1478873603.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:23.636Z,1478873603.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:23.743Z,1478873603.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:24.177Z,1478873604.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:24.432Z,1478873604.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:24.565Z,1478873604.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:24.983Z,1478873604.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:25.229Z,1478873605.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:25.370Z,1478873605.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:25.640Z,1478873605.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:25.753Z,1478873605.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:26.147Z,1478873606.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:26.436Z,1478873606.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:26.561Z,1478873606.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:26.953Z,1478873606.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:27.164Z,1478873607.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:27.352Z,1478873607.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:27.757Z,1478873607.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:27.960Z,1478873607.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:28.151Z,1478873608.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:28.553Z,1478873608.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:28.757Z,1478873608.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:28.959Z,1478873608.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:29.172Z,1478873609.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:29.357Z,1478873609.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:29.757Z,1478873609.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:29.968Z,1478873609.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:30.157Z,1478873610.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:30.549Z,1478873610.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:30.773Z,1478873610.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:30.960Z,1478873610.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:31.192Z,1478873611.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:31.350Z,1478873611.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:31.765Z,1478873611.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:31.988Z,1478873611.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:32.165Z,1478873612.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:32.550Z,1478873612.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:32.785Z,1478873612.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:32.962Z,1478873612.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:33.196Z,1478873613.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:33.361Z,1478873613.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:33.750Z,1478873613.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:33.992Z,1478873613.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:34.155Z,1478873614.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:34.553Z,1478873614.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:34.790Z,1478873614.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:34.956Z,1478873614.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:35.268Z,1478873615.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:35.357Z,1478873615.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:35.756Z,1478873615.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:36.064Z,1478873616.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:36.164Z,1478873616.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:36.563Z,1478873616.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:36.860Z,1478873616.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:36.978Z,1478873616.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:37.340Z,1478873617.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:37.616Z,1478873617.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:37.746Z,1478873617.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:38.145Z,1478873618.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:38.412Z,1478873618.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:38.548Z,1478873618.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:38.981Z,1478873618.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:39.209Z,1478873619.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:39.347Z,1478873619.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:39.620Z,1478873619.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:39.755Z,1478873619.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:40.144Z,1478873620.144 [BPC1](ERROR): Failed to receive battery data
2016-11-11T14:13:40.144Z,1478873620.144 [BPC1] Communications Fault, FailCount= 1
2016-11-11T14:13:40.145Z,1478873620.145 [BPC1](ERROR): Communications Fault
2016-11-11T14:13:40.153Z,1478873620.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:40.189Z,1478873620.189 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T14:13:40.553Z,1478873620.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:40.948Z,1478873620.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:41.369Z,1478873621.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:41.430Z,1478873621.430 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:13:41.430Z,1478873621.430 [BPC1] No Fault, FailCount= 1
2016-11-11T14:13:41.794Z,1478873621.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:42.190Z,1478873622.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:42.557Z,1478873622.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:42.956Z,1478873622.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:43.350Z,1478873623.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:43.750Z,1478873623.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:44.158Z,1478873624.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:44.550Z,1478873624.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:44.957Z,1478873624.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:45.358Z,1478873625.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:45.750Z,1478873625.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:46.156Z,1478873626.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:46.558Z,1478873626.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:46.955Z,1478873626.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:47.354Z,1478873627.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:47.758Z,1478873627.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:48.150Z,1478873628.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:48.557Z,1478873628.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:48.956Z,1478873628.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:49.357Z,1478873629.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:49.753Z,1478873629.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:50.044Z,1478873630.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:50.161Z,1478873630.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:50.550Z,1478873630.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:50.840Z,1478873630.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:50.956Z,1478873630.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:51.353Z,1478873631.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:51.596Z,1478873631.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:51.754Z,1478873631.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:52.159Z,1478873632.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:52.392Z,1478873632.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:52.573Z,1478873632.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:52.973Z,1478873632.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:53.189Z,1478873633.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:53.362Z,1478873633.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:53.600Z,1478873633.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:13:53.753Z,1478873633.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:54.148Z,1478873634.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:54.575Z,1478873634.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:54.949Z,1478873634.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:55.385Z,1478873635.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:55.777Z,1478873635.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:56.147Z,1478873636.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:56.547Z,1478873636.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:56.955Z,1478873636.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:57.347Z,1478873637.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:57.757Z,1478873637.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:58.149Z,1478873638.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:58.558Z,1478873638.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:58.961Z,1478873638.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:59.354Z,1478873639.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:13:59.758Z,1478873639.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:00.150Z,1478873640.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:00.558Z,1478873640.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:00.957Z,1478873640.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:01.350Z,1478873641.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:01.758Z,1478873641.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:02.149Z,1478873642.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:02.550Z,1478873642.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:02.957Z,1478873642.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:03.360Z,1478873643.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:03.756Z,1478873643.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:04.016Z,1478873644.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:14:04.160Z,1478873644.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:04.169Z,1478873644.169 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T14:14:04.169Z,1478873644.169 [Default:CheckIn:C.Wait] Stopped
2016-11-11T14:14:04.169Z,1478873644.169 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T14:14:04.169Z,1478873644.169 [Default:CheckIn:D] Running Loop=1
2016-11-11T14:14:04.561Z,1478873644.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:04.569Z,1478873644.569 [Default:CheckIn:D] Stopped
2016-11-11T14:14:04.569Z,1478873644.569 [Default:CheckIn:E] Running Loop=1
2016-11-11T14:14:04.812Z,1478873644.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:14:04.960Z,1478873644.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:04.969Z,1478873644.969 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 564.054297 min 
2016-11-11T14:14:04.970Z,1478873644.970 [Default:CheckIn:E] Stopped
2016-11-11T14:14:04.970Z,1478873644.970 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T14:14:04.970Z,1478873644.970 [Default:CheckIn] Stopped
2016-11-11T14:14:04.970Z,1478873644.970 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T14:14:04.970Z,1478873644.970 [Default:CheckIn](INFO): Running loop #55
2016-11-11T14:14:04.970Z,1478873644.970 [Default:CheckIn] Running Loop=55
2016-11-11T14:14:04.970Z,1478873644.970 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T14:14:04.971Z,1478873644.971 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T14:14:05.576Z,1478873645.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:14:06.372Z,1478873646.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:14:07.169Z,1478873647.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:14:07.580Z,1478873647.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:14:08.411Z,1478873648.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:08.477Z,1478873648.477 [NAL9602](INFO): Powering up
2016-11-11T14:14:08.529Z,1478873648.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:08.939Z,1478873648.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:09.361Z,1478873649.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:09.716Z,1478873649.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:10.149Z,1478873650.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:10.553Z,1478873650.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:10.927Z,1478873650.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:11.325Z,1478873651.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:11.719Z,1478873651.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:12.119Z,1478873652.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:12.541Z,1478873652.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:12.928Z,1478873652.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:13.324Z,1478873653.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:13.731Z,1478873653.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:14.141Z,1478873654.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:14.512Z,1478873654.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:14.924Z,1478873654.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:15.320Z,1478873655.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:15.719Z,1478873655.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:16.119Z,1478873656.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:16.520Z,1478873656.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:16.926Z,1478873656.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:17.337Z,1478873657.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:17.725Z,1478873657.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:18.125Z,1478873658.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:18.522Z,1478873658.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:18.934Z,1478873658.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:19.281Z,1478873659.281 [NAL9602](INFO): NAL9602 initialized
2016-11-11T14:14:19.332Z,1478873659.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:19.728Z,1478873659.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:20.081Z,1478873660.081 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T14:14:20.081Z,1478873660.081 [NAL9602] Data Fault, FailCount= 2
2016-11-11T14:14:20.081Z,1478873660.081 [NAL9602](ERROR): Data Fault
2016-11-11T14:14:20.141Z,1478873660.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:20.181Z,1478873660.181 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T14:14:20.481Z,1478873660.481 [NAL9602](INFO): Powering down
2016-11-11T14:14:20.541Z,1478873660.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:20.957Z,1478873660.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:21.330Z,1478873661.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:21.366Z,1478873661.366 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T14:14:21.366Z,1478873661.366 [NAL9602] No Fault, FailCount= 2
2016-11-11T14:14:21.719Z,1478873661.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:22.119Z,1478873662.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:22.522Z,1478873662.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:22.961Z,1478873662.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:23.329Z,1478873663.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:23.746Z,1478873663.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:24.122Z,1478873664.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:24.553Z,1478873664.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:24.933Z,1478873664.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:25.369Z,1478873665.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:25.681Z,1478873665.681 [NAL9602](INFO): Powering up NAL9602
2016-11-11T14:14:25.740Z,1478873665.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:26.133Z,1478873666.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:26.524Z,1478873666.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:26.940Z,1478873666.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:27.336Z,1478873667.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:27.728Z,1478873667.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:28.117Z,1478873668.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:28.521Z,1478873668.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:28.928Z,1478873668.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:29.319Z,1478873669.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:29.729Z,1478873669.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:30.120Z,1478873670.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:30.541Z,1478873670.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:30.984Z,1478873670.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:31.316Z,1478873671.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:31.715Z,1478873671.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:32.129Z,1478873672.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:32.520Z,1478873672.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:32.919Z,1478873672.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:33.328Z,1478873673.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:33.731Z,1478873673.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:34.128Z,1478873674.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:34.532Z,1478873674.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:34.929Z,1478873674.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:35.333Z,1478873675.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:35.757Z,1478873675.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:36.128Z,1478873676.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:36.540Z,1478873676.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:36.881Z,1478873676.881 [NAL9602](INFO): NAL9602 initialized
2016-11-11T14:14:36.933Z,1478873676.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:37.349Z,1478873677.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:37.739Z,1478873677.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:38.147Z,1478873678.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:38.565Z,1478873678.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:38.929Z,1478873678.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:39.374Z,1478873679.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:39.774Z,1478873679.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:40.146Z,1478873680.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:40.535Z,1478873680.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:40.925Z,1478873680.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:41.331Z,1478873681.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:41.742Z,1478873681.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:42.129Z,1478873682.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:42.537Z,1478873682.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:42.926Z,1478873682.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:43.322Z,1478873683.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:43.729Z,1478873683.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:44.130Z,1478873684.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:44.545Z,1478873684.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:44.942Z,1478873684.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:45.343Z,1478873685.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:45.729Z,1478873685.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:46.137Z,1478873686.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:46.516Z,1478873686.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:46.953Z,1478873686.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:47.349Z,1478873687.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:47.716Z,1478873687.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:48.125Z,1478873688.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:48.524Z,1478873688.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:48.925Z,1478873688.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:49.322Z,1478873689.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:49.729Z,1478873689.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:50.129Z,1478873690.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:50.529Z,1478873690.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:50.960Z,1478873690.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:51.326Z,1478873691.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:51.720Z,1478873691.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:52.159Z,1478873692.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:52.519Z,1478873692.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:52.939Z,1478873692.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:53.349Z,1478873693.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:53.749Z,1478873693.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:54.165Z,1478873694.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:54.537Z,1478873694.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:54.939Z,1478873694.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:55.316Z,1478873695.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:55.713Z,1478873695.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:56.122Z,1478873696.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:56.521Z,1478873696.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:56.934Z,1478873696.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:57.334Z,1478873697.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:57.738Z,1478873697.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:58.146Z,1478873698.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:58.530Z,1478873698.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:58.933Z,1478873698.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:59.333Z,1478873699.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:14:59.732Z,1478873699.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:00.129Z,1478873700.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:00.537Z,1478873700.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:00.943Z,1478873700.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:01.324Z,1478873701.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:01.754Z,1478873701.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:02.129Z,1478873702.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:02.533Z,1478873702.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:02.929Z,1478873702.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:03.339Z,1478873703.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:03.742Z,1478873703.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:04.138Z,1478873704.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:04.525Z,1478873704.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:04.938Z,1478873704.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:05.340Z,1478873705.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:08.873Z,1478873708.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:08.985Z,1478873708.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:09.366Z,1478873709.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:09.801Z,1478873709.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:10.166Z,1478873710.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:10.626Z,1478873710.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:10.964Z,1478873710.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:11.389Z,1478873711.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:11.765Z,1478873711.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:12.161Z,1478873712.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:12.565Z,1478873712.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:12.960Z,1478873712.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:13.368Z,1478873713.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:13.763Z,1478873713.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:14.165Z,1478873714.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:14.570Z,1478873714.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:14.961Z,1478873714.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:15.363Z,1478873715.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:15.773Z,1478873715.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:16.162Z,1478873716.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:16.567Z,1478873716.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:16.964Z,1478873716.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:17.362Z,1478873717.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:17.773Z,1478873717.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:18.181Z,1478873718.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:18.633Z,1478873718.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:18.965Z,1478873718.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:19.369Z,1478873719.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:19.765Z,1478873719.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:20.162Z,1478873720.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:20.526Z,1478873720.526 [NAL9602](INFO): SBD MO Status=2, MOMSN=348, MT Status=2, MTMSN=0
2016-11-11T14:15:20.527Z,1478873720.527 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T14:15:20.648Z,1478873720.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:20.977Z,1478873720.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:21.363Z,1478873721.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:21.768Z,1478873721.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:22.209Z,1478873722.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:22.622Z,1478873722.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:22.993Z,1478873722.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:23.368Z,1478873723.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:23.767Z,1478873723.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:24.185Z,1478873724.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:24.614Z,1478873724.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:25.009Z,1478873725.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:25.401Z,1478873725.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:25.761Z,1478873725.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:26.160Z,1478873726.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:26.560Z,1478873726.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:26.960Z,1478873726.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:27.359Z,1478873727.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:27.761Z,1478873727.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:28.177Z,1478873728.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:28.570Z,1478873728.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:28.973Z,1478873728.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:29.378Z,1478873729.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:29.757Z,1478873729.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:30.152Z,1478873730.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:30.561Z,1478873730.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:30.989Z,1478873730.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:31.369Z,1478873731.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:31.769Z,1478873731.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:32.173Z,1478873732.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:32.624Z,1478873732.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:32.978Z,1478873732.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:33.377Z,1478873733.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:33.780Z,1478873733.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:34.156Z,1478873734.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:34.652Z,1478873734.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:34.961Z,1478873734.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:35.365Z,1478873735.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:35.759Z,1478873735.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:36.169Z,1478873736.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:36.673Z,1478873736.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:36.981Z,1478873736.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:37.400Z,1478873737.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:37.772Z,1478873737.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:38.189Z,1478873738.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:38.643Z,1478873738.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:38.989Z,1478873738.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:39.393Z,1478873739.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:39.757Z,1478873739.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:40.157Z,1478873740.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:40.557Z,1478873740.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:40.981Z,1478873740.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:41.370Z,1478873741.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:41.771Z,1478873741.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:42.169Z,1478873742.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:42.565Z,1478873742.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:42.972Z,1478873742.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:43.357Z,1478873743.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:43.758Z,1478873743.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:44.164Z,1478873744.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:44.559Z,1478873744.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:44.961Z,1478873744.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:45.371Z,1478873745.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:45.777Z,1478873745.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:46.178Z,1478873746.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:46.629Z,1478873746.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:46.973Z,1478873746.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:47.381Z,1478873747.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:47.773Z,1478873747.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:48.173Z,1478873748.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:48.622Z,1478873748.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:48.978Z,1478873748.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:49.364Z,1478873749.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:49.767Z,1478873749.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:50.205Z,1478873750.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:50.605Z,1478873750.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:50.970Z,1478873750.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:51.402Z,1478873751.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:51.757Z,1478873751.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:52.159Z,1478873752.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:52.630Z,1478873752.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:52.972Z,1478873752.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:53.408Z,1478873753.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:53.806Z,1478873753.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:54.175Z,1478873754.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:54.574Z,1478873754.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:54.973Z,1478873754.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:55.373Z,1478873755.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:55.772Z,1478873755.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:56.173Z,1478873756.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:56.552Z,1478873756.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:57.022Z,1478873757.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:57.365Z,1478873757.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:57.760Z,1478873757.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:58.167Z,1478873758.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:58.561Z,1478873758.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:59.034Z,1478873759.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:59.364Z,1478873759.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:15:59.777Z,1478873759.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:00.157Z,1478873760.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:00.618Z,1478873760.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:00.655Z,1478873760.655 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T14:16:00.968Z,1478873760.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:01.369Z,1478873761.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:01.769Z,1478873761.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:02.172Z,1478873762.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:02.590Z,1478873762.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:02.988Z,1478873762.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:03.381Z,1478873763.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:03.781Z,1478873763.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:04.154Z,1478873764.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:04.604Z,1478873764.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:04.962Z,1478873764.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:05.361Z,1478873765.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:08.966Z,1478873768.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:09.101Z,1478873769.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:09.521Z,1478873769.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:09.885Z,1478873769.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:10.313Z,1478873770.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:10.709Z,1478873770.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:11.072Z,1478873771.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:11.482Z,1478873771.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:11.881Z,1478873771.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:12.284Z,1478873772.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:12.689Z,1478873772.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:13.083Z,1478873773.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:13.484Z,1478873773.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:13.885Z,1478873773.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:14.285Z,1478873774.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:14.689Z,1478873774.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:15.082Z,1478873775.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:15.489Z,1478873775.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:15.892Z,1478873775.892 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:15.892Z,1478873775.892 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 169
2016-11-11T14:16:15.893Z,1478873775.893 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:16:15.899Z,1478873775.899 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:15.900Z,1478873775.900 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 169
2016-11-11T14:16:15.900Z,1478873775.900 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:16:15.902Z,1478873775.902 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:15.902Z,1478873775.902 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 169
2016-11-11T14:16:15.902Z,1478873775.902 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:16:15.916Z,1478873775.916 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:16:15.916Z,1478873775.916 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:16:15.916Z,1478873775.916 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:16:16.310Z,1478873776.310 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:16:16.310Z,1478873776.310 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 169
2016-11-11T14:16:16.311Z,1478873776.311 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:16:16.311Z,1478873776.311 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 169
2016-11-11T14:16:16.316Z,1478873776.316 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:16:16.316Z,1478873776.316 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 169
2016-11-11T14:16:16.673Z,1478873776.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:16:16.673Z,1478873776.673 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:16:16.674Z,1478873776.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:16:16.678Z,1478873776.678 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:16:16.695Z,1478873776.695 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:16:16.696Z,1478873776.695 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:16:16.696Z,1478873776.696 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:16:16.696Z,1478873776.696 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:16:16.697Z,1478873776.697 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:16:17.082Z,1478873777.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:17.473Z,1478873777.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:17.877Z,1478873777.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:18.313Z,1478873778.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:18.685Z,1478873778.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:19.084Z,1478873779.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:19.489Z,1478873779.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:19.877Z,1478873779.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:20.301Z,1478873780.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:20.688Z,1478873780.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:21.088Z,1478873781.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:21.488Z,1478873781.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:21.889Z,1478873781.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:22.321Z,1478873782.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:22.681Z,1478873782.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:23.076Z,1478873783.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:23.510Z,1478873783.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:23.885Z,1478873783.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:24.306Z,1478873784.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:24.679Z,1478873784.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:25.117Z,1478873785.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:25.511Z,1478873785.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:25.876Z,1478873785.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:26.276Z,1478873786.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:26.680Z,1478873786.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:27.075Z,1478873787.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:27.483Z,1478873787.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:27.881Z,1478873787.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:28.287Z,1478873788.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:28.689Z,1478873788.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:29.087Z,1478873789.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:29.488Z,1478873789.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:29.887Z,1478873789.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:30.289Z,1478873790.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:30.688Z,1478873790.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:31.088Z,1478873791.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:31.496Z,1478873791.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:31.893Z,1478873791.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:32.273Z,1478873792.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:32.687Z,1478873792.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:33.081Z,1478873793.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:33.477Z,1478873793.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:33.875Z,1478873793.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:34.284Z,1478873794.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:34.677Z,1478873794.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:35.082Z,1478873795.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:35.485Z,1478873795.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:35.882Z,1478873795.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:36.279Z,1478873796.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:36.689Z,1478873796.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:37.110Z,1478873797.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:37.509Z,1478873797.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:37.776Z,1478873797.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:37.893Z,1478873797.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:38.309Z,1478873798.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:38.572Z,1478873798.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:38.685Z,1478873798.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:39.110Z,1478873799.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:39.332Z,1478873799.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:39.514Z,1478873799.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:39.876Z,1478873799.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:40.128Z,1478873800.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:40.284Z,1478873800.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:40.675Z,1478873800.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:40.924Z,1478873800.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:41.081Z,1478873801.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:41.340Z,1478873801.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:41.480Z,1478873801.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:41.880Z,1478873801.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:42.281Z,1478873802.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:42.679Z,1478873802.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:43.085Z,1478873803.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:43.487Z,1478873803.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:43.877Z,1478873803.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:44.285Z,1478873804.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:44.679Z,1478873804.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:45.078Z,1478873805.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:45.483Z,1478873805.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:45.887Z,1478873805.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:46.293Z,1478873806.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:46.685Z,1478873806.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:47.077Z,1478873807.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:47.481Z,1478873807.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:47.680Z,1478873807.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:47.880Z,1478873807.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:48.279Z,1478873808.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:48.476Z,1478873808.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:48.683Z,1478873808.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:48.884Z,1478873808.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:49.086Z,1478873809.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:49.486Z,1478873809.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:49.680Z,1478873809.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:49.842Z,1478873809.842 [NAL9602](INFO): SBD MO Status=2, MOMSN=348, MT Status=2, MTMSN=0
2016-11-11T14:16:49.842Z,1478873809.842 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T14:16:49.897Z,1478873809.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:50.297Z,1478873810.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:50.476Z,1478873810.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:50.685Z,1478873810.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:50.952Z,1478873810.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:51.088Z,1478873811.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:51.513Z,1478873811.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:51.748Z,1478873811.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:51.913Z,1478873811.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:52.289Z,1478873812.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:52.544Z,1478873812.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:52.705Z,1478873812.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:53.087Z,1478873813.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:53.312Z,1478873813.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:53.505Z,1478873813.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:53.911Z,1478873813.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:54.108Z,1478873814.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:54.288Z,1478873814.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:54.684Z,1478873814.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:54.905Z,1478873814.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:55.093Z,1478873815.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:55.316Z,1478873815.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:55.504Z,1478873815.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:55.885Z,1478873815.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:56.114Z,1478873816.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:56.281Z,1478873816.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:56.685Z,1478873816.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:56.836Z,1478873816.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:57.084Z,1478873817.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:57.488Z,1478873817.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:57.632Z,1478873817.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:57.885Z,1478873817.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:58.285Z,1478873818.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:58.429Z,1478873818.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:58.689Z,1478873818.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:58.840Z,1478873818.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:59.097Z,1478873819.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:59.490Z,1478873819.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:16:59.636Z,1478873819.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:16:59.894Z,1478873819.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:00.296Z,1478873820.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:00.433Z,1478873820.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:00.689Z,1478873820.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:00.844Z,1478873820.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:01.073Z,1478873821.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:01.477Z,1478873821.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:01.641Z,1478873821.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:01.887Z,1478873821.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:02.292Z,1478873822.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:02.437Z,1478873822.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:02.680Z,1478873822.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:02.848Z,1478873822.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:03.078Z,1478873823.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:03.489Z,1478873823.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:03.644Z,1478873823.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:03.885Z,1478873823.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:04.289Z,1478873824.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:04.440Z,1478873824.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:04.669Z,1478873824.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:04.940Z,1478873824.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:05.086Z,1478873825.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:05.482Z,1478873825.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:05.736Z,1478873825.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:06.532Z,1478873826.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:07.288Z,1478873827.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:08.084Z,1478873828.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:08.881Z,1478873828.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:09.173Z,1478873829.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:09.277Z,1478873829.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:09.296Z,1478873829.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:09.681Z,1478873829.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:10.084Z,1478873830.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:10.092Z,1478873830.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:10.507Z,1478873830.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:10.820Z,1478873830.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:10.913Z,1478873830.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:11.301Z,1478873831.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:11.616Z,1478873831.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:11.716Z,1478873831.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:12.068Z,1478873832.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:12.412Z,1478873832.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:12.518Z,1478873832.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:12.824Z,1478873832.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:12.851Z,1478873832.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:13.288Z,1478873833.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:13.622Z,1478873833.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:13.667Z,1478873833.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:14.058Z,1478873834.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:14.416Z,1478873834.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:14.508Z,1478873834.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:14.828Z,1478873834.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:14.876Z,1478873834.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:15.282Z,1478873835.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:15.624Z,1478873835.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:15.661Z,1478873835.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:16.072Z,1478873836.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:16.422Z,1478873836.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:16.504Z,1478873836.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:16.836Z,1478873836.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:16.878Z,1478873836.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:17.284Z,1478873837.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:17.632Z,1478873837.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:17.662Z,1478873837.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:18.073Z,1478873838.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:18.429Z,1478873838.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:18.450Z,1478873838.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:18.858Z,1478873838.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:18.920Z,1478873838.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:19.261Z,1478873839.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:19.659Z,1478873839.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:19.717Z,1478873839.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:20.110Z,1478873840.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:20.471Z,1478873840.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:20.512Z,1478873840.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:20.944Z,1478873840.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:21.299Z,1478873841.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:21.308Z,1478873841.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:21.700Z,1478873841.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:21.716Z,1478873841.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:22.108Z,1478873842.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:22.462Z,1478873842.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:22.512Z,1478873842.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:22.908Z,1478873842.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:23.308Z,1478873843.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:23.333Z,1478873843.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:23.716Z,1478873843.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:23.729Z,1478873843.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:24.084Z,1478873844.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:24.516Z,1478873844.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:24.570Z,1478873844.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:24.890Z,1478873844.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:24.924Z,1478873844.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:25.306Z,1478873845.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:25.713Z,1478873845.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:25.720Z,1478873845.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:26.085Z,1478873846.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:26.494Z,1478873846.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:26.516Z,1478873846.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:26.865Z,1478873846.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:26.924Z,1478873846.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:27.269Z,1478873847.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:27.667Z,1478873847.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:27.720Z,1478873847.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:28.076Z,1478873848.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:28.486Z,1478873848.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:28.516Z,1478873848.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:28.854Z,1478873848.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:28.924Z,1478873848.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:29.297Z,1478873849.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:29.663Z,1478873849.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:29.720Z,1478873849.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:30.089Z,1478873850.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:30.505Z,1478873850.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:30.516Z,1478873850.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:30.892Z,1478873850.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:30.924Z,1478873850.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:31.264Z,1478873851.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:31.680Z,1478873851.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:31.720Z,1478873851.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:32.061Z,1478873852.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:32.516Z,1478873852.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:32.539Z,1478873852.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:32.888Z,1478873852.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:32.924Z,1478873852.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:33.257Z,1478873853.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:33.687Z,1478873853.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:33.720Z,1478873853.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:34.093Z,1478873854.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:34.491Z,1478873854.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:34.516Z,1478873854.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:34.906Z,1478873854.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:35.272Z,1478873855.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:35.304Z,1478873855.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:35.710Z,1478873855.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:36.074Z,1478873856.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:36.100Z,1478873856.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:36.481Z,1478873856.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:36.885Z,1478873856.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:36.896Z,1478873856.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:37.304Z,1478873857.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:37.332Z,1478873857.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:37.777Z,1478873857.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:38.084Z,1478873858.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:38.100Z,1478873858.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:38.529Z,1478873858.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:38.780Z,1478873858.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:38.892Z,1478873858.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:39.294Z,1478873859.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:39.576Z,1478873859.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:39.683Z,1478873859.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:40.072Z,1478873860.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:40.373Z,1478873860.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:40.508Z,1478873860.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:40.785Z,1478873860.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:40.871Z,1478873860.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:41.287Z,1478873861.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:41.580Z,1478873861.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:41.661Z,1478873861.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:42.069Z,1478873862.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:42.377Z,1478873862.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:42.493Z,1478873862.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:42.788Z,1478873862.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:42.879Z,1478873862.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:43.283Z,1478873863.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:43.584Z,1478873863.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:43.692Z,1478873863.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:44.070Z,1478873864.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:44.381Z,1478873864.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:44.478Z,1478873864.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:44.792Z,1478873864.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:44.882Z,1478873864.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:45.259Z,1478873865.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:45.588Z,1478873865.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:45.673Z,1478873865.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:46.076Z,1478873866.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:46.384Z,1478873866.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:46.506Z,1478873866.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:46.886Z,1478873866.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:46.888Z,1478873866.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:47.290Z,1478873867.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:47.684Z,1478873867.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:47.717Z,1478873867.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:48.064Z,1478873868.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:48.468Z,1478873868.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:48.480Z,1478873868.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:48.898Z,1478873868.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:49.236Z,1478873869.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:49.253Z,1478873869.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:49.654Z,1478873869.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:50.032Z,1478873870.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:50.067Z,1478873870.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:50.460Z,1478873870.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:50.830Z,1478873870.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:50.882Z,1478873870.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:51.240Z,1478873871.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:51.263Z,1478873871.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:51.705Z,1478873871.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:52.037Z,1478873872.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:52.069Z,1478873872.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:52.461Z,1478873872.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:52.760Z,1478873872.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:52.899Z,1478873872.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:53.265Z,1478873873.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:53.556Z,1478873873.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:53.691Z,1478873873.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:54.101Z,1478873874.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:54.353Z,1478873874.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:54.466Z,1478873874.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:54.764Z,1478873874.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:54.858Z,1478873874.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:55.265Z,1478873875.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:55.560Z,1478873875.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:55.668Z,1478873875.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:56.058Z,1478873876.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:56.357Z,1478873876.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:56.463Z,1478873876.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:56.768Z,1478873876.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:56.868Z,1478873876.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:57.258Z,1478873877.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:57.564Z,1478873877.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:57.669Z,1478873877.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:58.058Z,1478873878.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:58.361Z,1478873878.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:58.469Z,1478873878.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:58.772Z,1478873878.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:58.869Z,1478873878.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:59.270Z,1478873879.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:17:59.568Z,1478873879.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:17:59.668Z,1478873879.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:00.069Z,1478873880.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:00.364Z,1478873880.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:00.504Z,1478873880.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:00.853Z,1478873880.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:00.892Z,1478873880.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:01.280Z,1478873881.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:01.655Z,1478873881.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:01.688Z,1478873881.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:02.064Z,1478873882.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:02.462Z,1478873882.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:02.484Z,1478873882.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:02.901Z,1478873882.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:03.204Z,1478873883.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:03.222Z,1478873883.222 [NAL9602](INFO): SBD MO Status=2, MOMSN=348, MT Status=2, MTMSN=0
2016-11-11T14:18:03.222Z,1478873883.222 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T14:18:03.275Z,1478873883.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:03.670Z,1478873883.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:04.001Z,1478873884.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:04.072Z,1478873884.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:04.468Z,1478873884.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:04.797Z,1478873884.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:04.879Z,1478873884.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:05.241Z,1478873885.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:05.261Z,1478873885.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:05.657Z,1478873885.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:06.036Z,1478873886.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:06.736Z,1478873886.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:07.532Z,1478873887.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:08.329Z,1478873888.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:08.740Z,1478873888.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:09.170Z,1478873889.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:09.325Z,1478873889.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:09.538Z,1478873889.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:09.673Z,1478873889.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:10.117Z,1478873890.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:10.333Z,1478873890.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:10.468Z,1478873890.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:10.748Z,1478873890.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:10.900Z,1478873890.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:11.286Z,1478873891.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:11.544Z,1478873891.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:11.669Z,1478873891.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:12.069Z,1478873892.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:12.341Z,1478873892.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:12.493Z,1478873892.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:12.752Z,1478873892.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:12.873Z,1478873892.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:13.261Z,1478873893.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:13.548Z,1478873893.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:13.689Z,1478873893.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:14.084Z,1478873894.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:14.344Z,1478873894.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:14.486Z,1478873894.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:14.859Z,1478873894.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:14.860Z,1478873894.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:15.269Z,1478873895.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:15.656Z,1478873895.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:15.669Z,1478873895.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:16.062Z,1478873896.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:16.452Z,1478873896.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:16.469Z,1478873896.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:16.913Z,1478873896.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:17.180Z,1478873897.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:17.278Z,1478873897.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:17.674Z,1478873897.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:17.976Z,1478873897.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:18.068Z,1478873898.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:18.470Z,1478873898.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:18.773Z,1478873898.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:18.882Z,1478873898.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:19.184Z,1478873899.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:19.272Z,1478873899.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:19.686Z,1478873899.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:19.980Z,1478873899.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:20.076Z,1478873900.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:20.514Z,1478873900.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:20.704Z,1478873900.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:20.858Z,1478873900.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:21.262Z,1478873901.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:21.500Z,1478873901.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:21.669Z,1478873901.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:22.064Z,1478873902.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:22.297Z,1478873902.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:22.461Z,1478873902.461 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T14:18:22.461Z,1478873902.461 [BPC1] Data Fault, FailCount= 1
2016-11-11T14:18:22.461Z,1478873902.461 [BPC1](ERROR): Data Fault
2016-11-11T14:18:22.469Z,1478873902.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:22.506Z,1478873902.506 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T14:18:22.708Z,1478873902.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:22.862Z,1478873902.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:23.271Z,1478873903.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:23.504Z,1478873903.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:23.661Z,1478873903.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:23.682Z,1478873903.682 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:18:23.682Z,1478873903.682 [BPC1] No Fault, FailCount= 1
2016-11-11T14:18:24.121Z,1478873904.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:24.301Z,1478873904.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:24.493Z,1478873904.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:24.712Z,1478873904.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:24.862Z,1478873904.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:25.273Z,1478873905.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:25.508Z,1478873905.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:25.740Z,1478873905.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:26.066Z,1478873906.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:26.305Z,1478873906.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:26.473Z,1478873906.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:26.716Z,1478873906.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:26.869Z,1478873906.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:27.262Z,1478873907.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:27.512Z,1478873907.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:27.666Z,1478873907.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:28.072Z,1478873908.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:28.308Z,1478873908.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:28.482Z,1478873908.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:28.804Z,1478873908.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:28.869Z,1478873908.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:29.280Z,1478873909.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:29.600Z,1478873909.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:29.673Z,1478873909.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:30.082Z,1478873910.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:30.396Z,1478873910.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:30.458Z,1478873910.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:30.857Z,1478873910.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:31.152Z,1478873911.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:31.261Z,1478873911.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:31.660Z,1478873911.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:31.948Z,1478873911.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:32.099Z,1478873912.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:32.426Z,1478873912.426 [NAL9602](INFO): SBD MO Status=2, MOMSN=348, MT Status=2, MTMSN=0
2016-11-11T14:18:32.426Z,1478873912.426 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T14:18:32.475Z,1478873912.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:32.745Z,1478873912.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:32.869Z,1478873912.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:33.156Z,1478873913.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:33.273Z,1478873913.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:33.663Z,1478873913.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:33.952Z,1478873913.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:34.073Z,1478873914.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:34.461Z,1478873914.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:34.704Z,1478873914.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:34.874Z,1478873914.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:35.256Z,1478873915.256 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T14:18:35.256Z,1478873915.256 [BPC1] Data Fault, FailCount= 2
2016-11-11T14:18:35.256Z,1478873915.256 [BPC1](ERROR): Data Fault
2016-11-11T14:18:35.269Z,1478873915.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:35.290Z,1478873915.290 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T14:18:35.502Z,1478873915.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:35.669Z,1478873915.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:36.066Z,1478873916.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:36.297Z,1478873916.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:36.472Z,1478873916.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:36.493Z,1478873916.493 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:18:36.493Z,1478873916.493 [BPC1] No Fault, FailCount= 2
2016-11-11T14:18:36.712Z,1478873916.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:36.933Z,1478873916.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:37.298Z,1478873917.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:37.510Z,1478873917.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:37.680Z,1478873917.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:38.074Z,1478873918.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:38.304Z,1478873918.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:38.476Z,1478873918.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:38.716Z,1478873918.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:38.877Z,1478873918.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:39.273Z,1478873919.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:39.512Z,1478873919.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:39.661Z,1478873919.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:40.061Z,1478873920.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:40.308Z,1478873920.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:40.469Z,1478873920.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:40.716Z,1478873920.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:40.868Z,1478873920.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:41.260Z,1478873921.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:41.512Z,1478873921.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:41.667Z,1478873921.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:42.074Z,1478873922.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:42.308Z,1478873922.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:42.474Z,1478873922.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:42.788Z,1478873922.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:42.862Z,1478873922.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:43.278Z,1478873923.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:43.584Z,1478873923.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:43.674Z,1478873923.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:44.062Z,1478873924.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:44.380Z,1478873924.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:44.466Z,1478873924.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:44.868Z,1478873924.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:45.136Z,1478873925.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:45.268Z,1478873925.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:45.669Z,1478873925.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:45.932Z,1478873925.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:46.072Z,1478873926.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:46.468Z,1478873926.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:46.729Z,1478873926.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:46.869Z,1478873926.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:47.140Z,1478873927.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:47.277Z,1478873927.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:47.673Z,1478873927.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:47.936Z,1478873927.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:48.078Z,1478873928.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:48.501Z,1478873928.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:48.676Z,1478873928.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:48.865Z,1478873928.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:49.309Z,1478873929.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:49.472Z,1478873929.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:49.660Z,1478873929.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:50.094Z,1478873930.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:50.268Z,1478873930.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:50.467Z,1478873930.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:50.692Z,1478873930.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:50.902Z,1478873930.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:51.295Z,1478873931.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:51.491Z,1478873931.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:51.677Z,1478873931.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:52.077Z,1478873932.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:52.284Z,1478873932.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:52.473Z,1478873932.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:52.692Z,1478873932.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:52.869Z,1478873932.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:53.269Z,1478873933.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:53.488Z,1478873933.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:53.665Z,1478873933.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:54.071Z,1478873934.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:54.284Z,1478873934.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:54.472Z,1478873934.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:54.692Z,1478873934.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:54.872Z,1478873934.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:55.273Z,1478873935.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:55.489Z,1478873935.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:55.681Z,1478873935.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:56.081Z,1478873936.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:56.284Z,1478873936.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:56.484Z,1478873936.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:56.756Z,1478873936.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:56.852Z,1478873936.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:57.252Z,1478873937.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:57.552Z,1478873937.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:57.657Z,1478873937.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:58.056Z,1478873938.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:58.348Z,1478873938.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:58.465Z,1478873938.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:58.869Z,1478873938.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:59.112Z,1478873939.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:18:59.260Z,1478873939.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:59.664Z,1478873939.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:18:59.908Z,1478873939.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:00.067Z,1478873940.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:00.465Z,1478873940.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:00.705Z,1478873940.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:00.868Z,1478873940.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:01.116Z,1478873941.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:01.269Z,1478873941.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:01.689Z,1478873941.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:01.912Z,1478873941.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:02.073Z,1478873942.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:02.458Z,1478873942.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:02.640Z,1478873942.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:02.857Z,1478873942.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:03.294Z,1478873943.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:03.436Z,1478873943.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:03.665Z,1478873943.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:04.095Z,1478873944.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:04.233Z,1478873944.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:04.459Z,1478873944.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:04.644Z,1478873944.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:04.901Z,1478873944.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:05.305Z,1478873945.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:05.314Z,1478873945.314 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T14:14:04.0Z
2016-11-11T14:19:05.314Z,1478873945.314 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T14:19:05.314Z,1478873945.314 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T14:19:05.440Z,1478873945.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:05.668Z,1478873945.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:06.237Z,1478873946.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:06.664Z,1478873946.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:07.460Z,1478873947.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:08.257Z,1478873948.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:08.664Z,1478873948.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:09.460Z,1478873949.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:09.656Z,1478873949.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:09.714Z,1478873949.714 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0220.lzma
2016-11-11T14:19:09.775Z,1478873949.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:10.156Z,1478873950.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:10.256Z,1478873950.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:10.505Z,1478873950.505 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0220.lzma.bak
2016-11-11T14:19:10.506Z,1478873950.506 [DataOverHttps](INFO): SBD MOMSN=4555479
2016-11-11T14:19:10.574Z,1478873950.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:10.740Z,1478873950.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:11.536Z,1478873951.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:11.999Z,1478873952.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:12.126Z,1478873952.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:12.332Z,1478873952.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:13.090Z,1478873953.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:13.884Z,1478873953.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:14.681Z,1478873954.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:15.100Z,1478873955.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:15.527Z,1478873955.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:15.677Z,1478873955.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:15.898Z,1478873955.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:16.062Z,1478873956.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:16.436Z,1478873956.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:16.612Z,1478873956.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:16.867Z,1478873956.866 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:16.867Z,1478873956.867 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 170
2016-11-11T14:19:16.867Z,1478873956.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:19:16.885Z,1478873956.885 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:16.885Z,1478873956.885 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 170
2016-11-11T14:19:16.885Z,1478873956.885 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:19:16.891Z,1478873956.891 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:16.891Z,1478873956.891 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 170
2016-11-11T14:19:16.892Z,1478873956.892 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:19:16.918Z,1478873956.918 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:19:16.919Z,1478873956.918 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:19:16.919Z,1478873956.919 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:19:17.250Z,1478873957.250 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:19:17.251Z,1478873957.251 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 170
2016-11-11T14:19:17.252Z,1478873957.251 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:19:17.252Z,1478873957.252 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 170
2016-11-11T14:19:17.252Z,1478873957.252 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:19:17.252Z,1478873957.252 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 170
2016-11-11T14:19:17.408Z,1478873957.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:18.205Z,1478873958.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:18.620Z,1478873958.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:19.416Z,1478873959.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:20.215Z,1478873960.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:20.624Z,1478873960.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:20.878Z,1478873960.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:19:20.879Z,1478873960.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:19:20.879Z,1478873960.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:19:20.884Z,1478873960.884 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:19:20.884Z,1478873960.884 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:19:20.885Z,1478873960.885 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:19:20.885Z,1478873960.885 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:19:20.886Z,1478873960.885 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:19:20.886Z,1478873960.886 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:19:20.945Z,1478873960.945 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0221.lzma
2016-11-11T14:19:21.014Z,1478873961.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:21.397Z,1478873961.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:21.484Z,1478873961.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:21.709Z,1478873961.709 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0221.lzma.bak
2016-11-11T14:19:21.709Z,1478873961.709 [DataOverHttps](INFO): SBD MOMSN=4555481
2016-11-11T14:19:21.805Z,1478873961.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:22.280Z,1478873962.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:22.688Z,1478873962.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:23.241Z,1478873963.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:23.254Z,1478873963.254 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T14:19:23.254Z,1478873963.254 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T14:19:23.254Z,1478873963.254 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T14:19:23.347Z,1478873963.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:23.484Z,1478873963.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:24.281Z,1478873964.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:24.692Z,1478873964.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:25.488Z,1478873965.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:26.284Z,1478873966.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:26.781Z,1478873966.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:26.917Z,1478873966.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:27.060Z,1478873967.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:27.289Z,1478873967.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:27.690Z,1478873967.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:27.856Z,1478873967.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:28.091Z,1478873968.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:28.494Z,1478873968.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:28.653Z,1478873968.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:28.892Z,1478873968.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:29.124Z,1478873969.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:29.291Z,1478873969.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:29.682Z,1478873969.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:29.920Z,1478873969.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:30.097Z,1478873970.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:30.495Z,1478873970.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:30.580Z,1478873970.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:30.894Z,1478873970.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:31.293Z,1478873971.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:31.377Z,1478873971.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:31.698Z,1478873971.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:32.106Z,1478873972.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:32.172Z,1478873972.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:32.525Z,1478873972.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:32.584Z,1478873972.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:32.916Z,1478873972.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:33.279Z,1478873973.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:33.380Z,1478873973.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:33.702Z,1478873973.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:34.088Z,1478873974.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:34.177Z,1478873974.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:34.512Z,1478873974.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:34.588Z,1478873974.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:34.940Z,1478873974.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:35.301Z,1478873975.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:35.384Z,1478873975.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:35.679Z,1478873975.679 [PNI_TCM](ERROR): CRC does not match. Expected:0x47232 got:0x25627
2016-11-11T14:19:35.734Z,1478873975.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:36.169Z,1478873976.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:36.181Z,1478873976.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:36.503Z,1478873976.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:36.592Z,1478873976.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:36.882Z,1478873976.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:37.279Z,1478873977.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:37.388Z,1478873977.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:37.679Z,1478873977.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:38.086Z,1478873978.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:38.184Z,1478873978.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:38.484Z,1478873978.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:38.688Z,1478873978.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:38.884Z,1478873978.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:39.317Z,1478873979.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:39.484Z,1478873979.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:39.689Z,1478873979.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:40.121Z,1478873980.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:40.280Z,1478873980.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:40.486Z,1478873980.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:40.894Z,1478873980.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:41.024Z,1478873981.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:41.292Z,1478873981.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:41.701Z,1478873981.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:41.820Z,1478873981.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:42.087Z,1478873982.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:42.489Z,1478873982.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:42.621Z,1478873982.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:42.889Z,1478873982.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:43.040Z,1478873983.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:43.296Z,1478873983.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:43.674Z,1478873983.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:43.836Z,1478873983.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:44.098Z,1478873984.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:44.486Z,1478873984.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:44.564Z,1478873984.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:44.893Z,1478873984.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:45.293Z,1478873985.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:45.360Z,1478873985.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:45.697Z,1478873985.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:46.087Z,1478873986.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:46.156Z,1478873986.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:46.498Z,1478873986.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:46.568Z,1478873986.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:46.941Z,1478873986.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:47.301Z,1478873987.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:47.364Z,1478873987.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:47.683Z,1478873987.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:48.140Z,1478873988.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:48.160Z,1478873988.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:48.497Z,1478873988.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:48.572Z,1478873988.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:48.917Z,1478873988.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:49.280Z,1478873989.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:49.368Z,1478873989.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:49.710Z,1478873989.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:50.154Z,1478873990.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:50.165Z,1478873990.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:50.442Z,1478873990.442 [NAL9602](INFO): SBD MO Status=2, MOMSN=348, MT Status=2, MTMSN=0
2016-11-11T14:19:50.442Z,1478873990.442 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T14:19:50.497Z,1478873990.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:50.572Z,1478873990.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:50.841Z,1478873990.841 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T14:19:50.893Z,1478873990.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:51.322Z,1478873991.322 [PNI_TCM](ERROR): CRC does not match. Expected:0x63724 got:0x26216
2016-11-11T14:19:51.349Z,1478873991.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:51.368Z,1478873991.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:51.693Z,1478873991.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:52.097Z,1478873992.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:52.164Z,1478873992.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:52.477Z,1478873992.477 [PNI_TCM](ERROR): CRC does not match. Expected:0x40669 got:0x64849
2016-11-11T14:19:52.517Z,1478873992.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:52.640Z,1478873992.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:52.890Z,1478873992.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:53.279Z,1478873993.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:53.436Z,1478873993.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:53.698Z,1478873993.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:54.072Z,1478873994.072 [PNI_TCM](ERROR): CRC does not match. Expected:0x48517 got:0x32768
2016-11-11T14:19:54.090Z,1478873994.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:54.232Z,1478873994.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:54.489Z,1478873994.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:54.885Z,1478873994.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:54.000Z,1478873995.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:55.293Z,1478873995.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:55.781Z,1478873995.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:55.796Z,1478873995.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:56.085Z,1478873996.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:56.440Z,1478873996.440 [NAL9602](INFO): Powering down
2016-11-11T14:19:56.508Z,1478873996.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:56.592Z,1478873996.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:56.897Z,1478873996.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:57.004Z,1478873997.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:57.273Z,1478873997.273 [PNI_TCM](ERROR): CRC does not match. Expected:0x23485 got:0x43865
2016-11-11T14:19:57.301Z,1478873997.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:57.689Z,1478873997.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:57.800Z,1478873997.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:58.082Z,1478873998.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:58.493Z,1478873998.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:58.544Z,1478873998.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:58.865Z,1478873998.865 [PNI_TCM](ERROR): CRC does not match. Expected:0x57621 got:0x58944
2016-11-11T14:19:58.905Z,1478873998.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:59.289Z,1478873999.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:19:59.340Z,1478873999.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:19:59.679Z,1478873999.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:00.137Z,1478874000.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:00.167Z,1478874000.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:00.506Z,1478874000.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:00.548Z,1478874000.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:00.889Z,1478874000.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:01.285Z,1478874001.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:01.344Z,1478874001.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:01.683Z,1478874001.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:02.141Z,1478874002.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:02.172Z,1478874002.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:02.492Z,1478874002.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:02.552Z,1478874002.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:02.905Z,1478874002.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:03.274Z,1478874003.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:03.348Z,1478874003.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:03.702Z,1478874003.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:04.144Z,1478874004.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:04.157Z,1478874004.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:04.490Z,1478874004.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:04.552Z,1478874004.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:04.889Z,1478874004.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:05.282Z,1478874005.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:05.348Z,1478874005.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:05.688Z,1478874005.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:06.090Z,1478874006.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:06.144Z,1478874006.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:06.489Z,1478874006.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:06.628Z,1478874006.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:06.885Z,1478874006.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:07.285Z,1478874007.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:07.424Z,1478874007.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:07.685Z,1478874007.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:08.089Z,1478874008.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:08.220Z,1478874008.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:08.484Z,1478874008.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:08.878Z,1478874008.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:08.984Z,1478874008.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:09.283Z,1478874009.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:09.685Z,1478874009.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:09.780Z,1478874009.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:10.084Z,1478874010.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:10.485Z,1478874010.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:10.576Z,1478874010.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:10.897Z,1478874010.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:10.988Z,1478874010.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:11.293Z,1478874011.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:11.676Z,1478874011.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:11.784Z,1478874011.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:12.156Z,1478874012.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:12.478Z,1478874012.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:12.528Z,1478874012.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:12.885Z,1478874012.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:13.279Z,1478874013.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:13.324Z,1478874013.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:13.684Z,1478874013.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:14.121Z,1478874014.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:14.149Z,1478874014.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:14.487Z,1478874014.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:14.532Z,1478874014.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:14.905Z,1478874014.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:15.282Z,1478874015.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:15.328Z,1478874015.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:15.692Z,1478874015.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:16.124Z,1478874016.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:16.174Z,1478874016.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:16.486Z,1478874016.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:16.532Z,1478874016.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:16.885Z,1478874016.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:17.319Z,1478874017.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:17.328Z,1478874017.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:17.686Z,1478874017.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:18.124Z,1478874018.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:18.146Z,1478874018.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:18.521Z,1478874018.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:18.532Z,1478874018.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:18.887Z,1478874018.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:19.290Z,1478874019.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:19.328Z,1478874019.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:19.682Z,1478874019.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:20.089Z,1478874020.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:20.124Z,1478874020.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:20.492Z,1478874020.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:20.600Z,1478874020.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:20.888Z,1478874020.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:21.285Z,1478874021.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:21.396Z,1478874021.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:21.692Z,1478874021.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:22.088Z,1478874022.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:22.192Z,1478874022.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:22.493Z,1478874022.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:22.885Z,1478874022.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:22.976Z,1478874022.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:23.279Z,1478874023.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:23.684Z,1478874023.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:23.772Z,1478874023.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:24.569Z,1478874024.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:24.980Z,1478874024.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:25.776Z,1478874025.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:26.496Z,1478874026.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:27.178Z,1478874027.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:27.292Z,1478874027.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:27.307Z,1478874027.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:27.657Z,1478874027.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:28.088Z,1478874028.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:28.122Z,1478874028.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:28.455Z,1478874028.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:28.500Z,1478874028.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:28.858Z,1478874028.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:29.277Z,1478874029.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:29.296Z,1478874029.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:29.652Z,1478874029.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:30.093Z,1478874030.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:30.122Z,1478874030.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:30.451Z,1478874030.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:30.504Z,1478874030.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:30.889Z,1478874030.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:31.254Z,1478874031.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:31.300Z,1478874031.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:31.651Z,1478874031.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:32.097Z,1478874032.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:32.122Z,1478874032.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:32.456Z,1478874032.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:32.508Z,1478874032.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:32.889Z,1478874032.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:33.250Z,1478874033.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:33.304Z,1478874033.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:33.690Z,1478874033.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:34.057Z,1478874034.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:34.100Z,1478874034.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:34.457Z,1478874034.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:34.576Z,1478874034.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:34.857Z,1478874034.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:35.257Z,1478874035.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:35.372Z,1478874035.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:35.660Z,1478874035.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:36.061Z,1478874036.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:36.168Z,1478874036.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:36.461Z,1478874036.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:36.854Z,1478874036.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:36.952Z,1478874036.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:37.261Z,1478874037.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:37.661Z,1478874037.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:37.748Z,1478874037.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:38.060Z,1478874038.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:38.456Z,1478874038.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:38.544Z,1478874038.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:38.864Z,1478874038.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:38.956Z,1478874038.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:39.264Z,1478874039.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:39.663Z,1478874039.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:39.752Z,1478874039.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:40.112Z,1478874040.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:40.444Z,1478874040.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:40.492Z,1478874040.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:40.849Z,1478874040.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:41.253Z,1478874041.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:41.288Z,1478874041.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:41.652Z,1478874041.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:42.084Z,1478874042.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:42.102Z,1478874042.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:42.451Z,1478874042.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:42.496Z,1478874042.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:42.855Z,1478874042.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:43.252Z,1478874043.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:43.292Z,1478874043.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:43.652Z,1478874043.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:44.088Z,1478874044.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:44.109Z,1478874044.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:44.496Z,1478874044.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:44.506Z,1478874044.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:44.865Z,1478874044.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:45.254Z,1478874045.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:45.292Z,1478874045.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:45.685Z,1478874045.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:46.088Z,1478874046.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:46.122Z,1478874046.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:46.450Z,1478874046.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:46.496Z,1478874046.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:46.879Z,1478874046.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:47.249Z,1478874047.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:47.292Z,1478874047.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:47.681Z,1478874047.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:48.078Z,1478874048.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:48.088Z,1478874048.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:48.457Z,1478874048.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:48.564Z,1478874048.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:48.851Z,1478874048.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:49.265Z,1478874049.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:49.360Z,1478874049.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:49.650Z,1478874049.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:50.051Z,1478874050.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:50.156Z,1478874050.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:50.456Z,1478874050.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:50.862Z,1478874050.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:50.916Z,1478874050.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:51.254Z,1478874051.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:51.654Z,1478874051.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:51.712Z,1478874051.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:52.064Z,1478874052.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:52.460Z,1478874052.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:52.508Z,1478874052.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:52.856Z,1478874052.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:52.920Z,1478874052.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:53.257Z,1478874053.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:53.651Z,1478874053.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:53.716Z,1478874053.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:54.117Z,1478874054.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:54.464Z,1478874054.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:54.480Z,1478874054.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:54.864Z,1478874054.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:55.268Z,1478874055.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:55.276Z,1478874055.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:55.665Z,1478874055.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:56.072Z,1478874056.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:56.106Z,1478874056.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:56.450Z,1478874056.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:56.488Z,1478874056.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:56.857Z,1478874056.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:57.251Z,1478874057.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:57.284Z,1478874057.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:57.652Z,1478874057.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:58.080Z,1478874058.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:58.105Z,1478874058.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:58.452Z,1478874058.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:58.488Z,1478874058.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:58.901Z,1478874058.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:59.257Z,1478874059.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:20:59.284Z,1478874059.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:20:59.660Z,1478874059.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:00.081Z,1478874060.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:00.177Z,1478874060.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:00.464Z,1478874060.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:00.504Z,1478874060.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:00.863Z,1478874060.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:01.273Z,1478874061.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:01.300Z,1478874061.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:01.664Z,1478874061.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:02.073Z,1478874062.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:02.097Z,1478874062.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:02.474Z,1478874062.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:02.544Z,1478874062.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:02.871Z,1478874062.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:03.249Z,1478874063.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:03.340Z,1478874063.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:03.657Z,1478874063.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:04.057Z,1478874064.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:04.136Z,1478874064.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:04.469Z,1478874064.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:04.860Z,1478874064.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:04.920Z,1478874064.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:05.263Z,1478874065.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:05.665Z,1478874065.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:05.716Z,1478874065.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:06.053Z,1478874066.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:06.500Z,1478874066.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:06.513Z,1478874066.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:06.850Z,1478874066.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:06.964Z,1478874066.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:07.249Z,1478874067.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:07.653Z,1478874067.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:07.761Z,1478874067.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:08.104Z,1478874068.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:08.444Z,1478874068.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:08.451Z,1478874068.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:08.852Z,1478874068.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:09.240Z,1478874069.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:09.251Z,1478874069.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:09.657Z,1478874069.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:10.037Z,1478874070.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:10.102Z,1478874070.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:10.448Z,1478874070.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:10.468Z,1478874070.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:10.863Z,1478874070.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:11.244Z,1478874071.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:11.268Z,1478874071.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:11.660Z,1478874071.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:12.040Z,1478874072.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:12.094Z,1478874072.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:12.475Z,1478874072.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:12.480Z,1478874072.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:12.848Z,1478874072.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:13.253Z,1478874073.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:13.276Z,1478874073.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:13.651Z,1478874073.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:14.072Z,1478874074.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:14.085Z,1478874074.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:14.452Z,1478874074.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:14.480Z,1478874074.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:14.897Z,1478874074.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:15.249Z,1478874075.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:15.276Z,1478874075.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:15.649Z,1478874075.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:16.073Z,1478874076.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:16.141Z,1478874076.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:16.452Z,1478874076.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:16.516Z,1478874076.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:16.873Z,1478874076.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:17.270Z,1478874077.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:17.312Z,1478874077.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:17.665Z,1478874077.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:18.059Z,1478874078.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:18.108Z,1478874078.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:18.547Z,1478874078.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:18.856Z,1478874078.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:18.896Z,1478874078.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:19.270Z,1478874079.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:19.671Z,1478874079.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:19.692Z,1478874079.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:20.044Z,1478874080.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:20.489Z,1478874080.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:20.519Z,1478874080.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:20.862Z,1478874080.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:20.900Z,1478874080.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:21.257Z,1478874081.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:21.660Z,1478874081.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:21.696Z,1478874081.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:22.078Z,1478874082.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:22.400Z,1478874082.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:22.467Z,1478874082.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:22.860Z,1478874082.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:23.196Z,1478874083.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:23.264Z,1478874083.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:23.654Z,1478874083.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:23.993Z,1478874083.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:24.100Z,1478874084.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:24.412Z,1478874084.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:25.208Z,1478874085.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:26.005Z,1478874086.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:26.416Z,1478874086.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:27.212Z,1478874087.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:27.419Z,1478874087.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:27.538Z,1478874087.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:28.009Z,1478874088.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:28.025Z,1478874088.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:28.322Z,1478874088.322 [PNI_TCM](ERROR): CRC does not match. Expected:0x34773 got:0x5897
2016-11-11T14:21:28.349Z,1478874088.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:28.420Z,1478874088.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:28.730Z,1478874088.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:29.177Z,1478874089.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:29.216Z,1478874089.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:29.564Z,1478874089.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:29.922Z,1478874089.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:30.012Z,1478874090.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:30.361Z,1478874090.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:30.500Z,1478874090.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:30.740Z,1478874090.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:31.169Z,1478874091.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:31.296Z,1478874091.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:31.518Z,1478874091.518 [PNI_TCM](ERROR): CRC does not match. Expected:0x11067 got:0x58944
2016-11-11T14:21:31.573Z,1478874091.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:31.931Z,1478874091.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:32.092Z,1478874092.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:32.329Z,1478874092.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:32.730Z,1478874092.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:32.848Z,1478874092.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:33.145Z,1478874093.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:33.542Z,1478874093.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:33.644Z,1478874093.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:33.937Z,1478874093.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:34.341Z,1478874094.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:34.441Z,1478874094.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:34.731Z,1478874094.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:34.852Z,1478874094.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:35.142Z,1478874095.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:35.536Z,1478874095.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:35.648Z,1478874095.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:35.990Z,1478874095.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:36.313Z,1478874096.313 [PNI_TCM](ERROR): CRC does not match. Expected:0x12952 got:0x1857
2016-11-11T14:21:36.357Z,1478874096.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:36.392Z,1478874096.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:36.729Z,1478874096.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:37.124Z,1478874097.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:37.188Z,1478874097.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:37.545Z,1478874097.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:37.962Z,1478874097.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:37.984Z,1478874097.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:38.340Z,1478874098.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:38.396Z,1478874098.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:38.725Z,1478874098.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:39.146Z,1478874099.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:39.192Z,1478874099.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:39.514Z,1478874099.514 [PNI_TCM](ERROR): CRC does not match. Expected:0x52821 got:0x21
2016-11-11T14:21:39.542Z,1478874099.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:39.927Z,1478874099.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:39.988Z,1478874099.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:40.337Z,1478874100.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:40.400Z,1478874100.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:40.730Z,1478874100.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:41.133Z,1478874101.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:41.196Z,1478874101.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:41.540Z,1478874101.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:41.965Z,1478874101.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:41.993Z,1478874101.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:42.335Z,1478874102.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:42.404Z,1478874102.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:42.737Z,1478874102.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:43.127Z,1478874103.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:43.200Z,1478874103.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:43.593Z,1478874103.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:43.940Z,1478874103.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:43.996Z,1478874103.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:44.369Z,1478874104.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:44.468Z,1478874104.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:44.735Z,1478874104.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:45.153Z,1478874105.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:45.265Z,1478874105.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:45.576Z,1478874105.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:45.932Z,1478874105.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:46.060Z,1478874106.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:46.333Z,1478874106.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:46.738Z,1478874106.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:46.840Z,1478874106.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:47.143Z,1478874107.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:47.544Z,1478874107.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:47.636Z,1478874107.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:47.928Z,1478874107.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:48.329Z,1478874108.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:48.433Z,1478874108.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:48.740Z,1478874108.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:48.844Z,1478874108.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:49.136Z,1478874109.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:49.550Z,1478874109.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:49.640Z,1478874109.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:49.982Z,1478874109.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:50.321Z,1478874110.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:50.376Z,1478874110.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:50.729Z,1478874110.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:51.119Z,1478874111.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:51.172Z,1478874111.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:51.524Z,1478874111.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:51.969Z,1478874111.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:52.001Z,1478874112.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:52.340Z,1478874112.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:52.380Z,1478874112.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:52.731Z,1478874112.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:53.137Z,1478874113.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:53.176Z,1478874113.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:53.529Z,1478874113.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:53.972Z,1478874113.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:53.998Z,1478874113.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:54.333Z,1478874114.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:54.384Z,1478874114.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:54.727Z,1478874114.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:55.128Z,1478874115.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:55.180Z,1478874115.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:55.530Z,1478874115.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:55.976Z,1478874115.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:55.998Z,1478874115.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:56.337Z,1478874116.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:56.384Z,1478874116.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:56.737Z,1478874116.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:57.141Z,1478874117.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:57.180Z,1478874117.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:57.553Z,1478874117.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:57.965Z,1478874117.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:57.976Z,1478874117.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:58.329Z,1478874118.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:58.456Z,1478874118.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:58.728Z,1478874118.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:59.165Z,1478874119.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:59.253Z,1478874119.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:21:59.530Z,1478874119.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:21:59.969Z,1478874119.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:00.048Z,1478874120.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:00.361Z,1478874120.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:00.745Z,1478874120.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:00.840Z,1478874120.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:01.136Z,1478874121.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:01.535Z,1478874121.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:01.636Z,1478874121.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:01.937Z,1478874121.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:02.336Z,1478874122.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:02.432Z,1478874122.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:02.746Z,1478874122.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:02.840Z,1478874122.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:03.120Z,1478874123.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:03.525Z,1478874123.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:03.636Z,1478874123.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:03.971Z,1478874123.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:04.336Z,1478874124.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:04.380Z,1478874124.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:04.727Z,1478874124.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:05.137Z,1478874125.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:05.176Z,1478874125.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:05.534Z,1478874125.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:05.972Z,1478874125.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:05.994Z,1478874125.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:06.341Z,1478874126.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:06.380Z,1478874126.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:06.737Z,1478874126.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:07.136Z,1478874127.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:07.176Z,1478874127.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:07.535Z,1478874127.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:07.972Z,1478874127.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:07.993Z,1478874127.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:08.340Z,1478874128.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:08.739Z,1478874128.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:08.796Z,1478874128.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:09.140Z,1478874129.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:09.537Z,1478874129.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:09.592Z,1478874129.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:09.993Z,1478874129.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:10.332Z,1478874130.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:10.336Z,1478874130.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:10.729Z,1478874130.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:11.132Z,1478874131.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:11.143Z,1478874131.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:11.532Z,1478874131.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:11.928Z,1478874131.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:11.934Z,1478874131.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:12.365Z,1478874132.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:12.432Z,1478874132.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:12.747Z,1478874132.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:13.133Z,1478874133.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:13.228Z,1478874133.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:13.567Z,1478874133.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:13.933Z,1478874133.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:14.024Z,1478874134.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:14.390Z,1478874134.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:14.749Z,1478874134.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:14.812Z,1478874134.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:15.142Z,1478874135.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:15.528Z,1478874135.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:15.608Z,1478874135.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:15.949Z,1478874135.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:16.342Z,1478874136.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:16.404Z,1478874136.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:16.728Z,1478874136.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:16.816Z,1478874136.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:17.137Z,1478874137.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:17.527Z,1478874137.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:17.612Z,1478874137.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:17.990Z,1478874137.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:18.339Z,1478874138.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:18.352Z,1478874138.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:18.740Z,1478874138.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:19.132Z,1478874139.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:19.148Z,1478874139.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:19.565Z,1478874139.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:19.944Z,1478874139.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:19.962Z,1478874139.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:20.347Z,1478874140.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:20.376Z,1478874140.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:20.753Z,1478874140.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:21.141Z,1478874141.141 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:21.141Z,1478874141.141 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 171
2016-11-11T14:22:21.141Z,1478874141.141 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:22:21.148Z,1478874141.148 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:21.148Z,1478874141.148 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 171
2016-11-11T14:22:21.148Z,1478874141.148 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:22:21.150Z,1478874141.150 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:21.150Z,1478874141.150 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 171
2016-11-11T14:22:21.150Z,1478874141.151 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:22:21.172Z,1478874141.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:21.225Z,1478874141.225 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:22:21.226Z,1478874141.226 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:22:21.226Z,1478874141.226 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:22:21.620Z,1478874141.620 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:22:21.621Z,1478874141.621 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 171
2016-11-11T14:22:21.621Z,1478874141.621 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:22:21.621Z,1478874141.621 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 171
2016-11-11T14:22:21.622Z,1478874141.622 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:22:21.622Z,1478874141.622 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 171
2016-11-11T14:22:21.968Z,1478874141.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:21.980Z,1478874141.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:22:21.980Z,1478874141.980 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:22:21.980Z,1478874141.980 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:22:22.018Z,1478874142.018 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:22:22.018Z,1478874142.018 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:22:22.019Z,1478874142.019 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:22:22.032Z,1478874142.032 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:22:22.033Z,1478874142.033 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:22:22.033Z,1478874142.033 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:22:22.354Z,1478874142.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:22.376Z,1478874142.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:22.735Z,1478874142.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:23.137Z,1478874143.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:23.172Z,1478874143.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:23.553Z,1478874143.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:23.968Z,1478874143.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:23.990Z,1478874143.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:24.339Z,1478874144.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:24.376Z,1478874144.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:25.172Z,1478874145.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:25.971Z,1478874145.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:26.444Z,1478874146.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:27.240Z,1478874147.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:28.036Z,1478874148.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:28.772Z,1478874148.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:29.568Z,1478874149.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:29.791Z,1478874149.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:29.932Z,1478874149.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:30.293Z,1478874150.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:30.365Z,1478874150.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:30.726Z,1478874150.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:30.776Z,1478874150.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:31.120Z,1478874151.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:31.535Z,1478874151.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:31.572Z,1478874151.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:31.949Z,1478874151.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:32.301Z,1478874152.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:32.328Z,1478874152.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:32.727Z,1478874152.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:33.097Z,1478874153.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:33.124Z,1478874153.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:33.545Z,1478874153.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:33.920Z,1478874153.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:33.951Z,1478874153.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:34.329Z,1478874154.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:34.373Z,1478874154.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:34.707Z,1478874154.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:35.117Z,1478874155.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:35.124Z,1478874155.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:35.521Z,1478874155.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:35.921Z,1478874155.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:35.984Z,1478874155.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:36.328Z,1478874156.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:36.336Z,1478874156.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:36.709Z,1478874156.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:37.124Z,1478874157.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:37.159Z,1478874157.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:37.557Z,1478874157.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:37.920Z,1478874157.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:37.926Z,1478874157.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:38.298Z,1478874158.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:38.372Z,1478874158.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:38.733Z,1478874158.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:39.137Z,1478874159.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:39.168Z,1478874159.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:39.502Z,1478874159.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:39.900Z,1478874159.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:39.965Z,1478874159.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:40.322Z,1478874160.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:40.408Z,1478874160.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:40.703Z,1478874160.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:41.104Z,1478874161.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:41.204Z,1478874161.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:41.511Z,1478874161.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:41.898Z,1478874161.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:42.000Z,1478874162.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:42.352Z,1478874162.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:42.721Z,1478874162.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:42.796Z,1478874162.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:43.103Z,1478874163.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:43.204Z,1478874163.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:43.517Z,1478874163.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:43.969Z,1478874163.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:43.000Z,1478874164.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:44.336Z,1478874164.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:44.702Z,1478874164.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:44.772Z,1478874164.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:45.131Z,1478874165.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:45.514Z,1478874165.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:45.568Z,1478874165.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:45.963Z,1478874165.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:46.313Z,1478874166.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:46.328Z,1478874166.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:46.710Z,1478874166.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:47.124Z,1478874167.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:47.131Z,1478874167.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:47.526Z,1478874167.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:47.920Z,1478874167.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:47.999Z,1478874167.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:48.299Z,1478874168.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:48.328Z,1478874168.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:48.738Z,1478874168.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:49.098Z,1478874169.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:49.136Z,1478874169.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:49.497Z,1478874169.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:49.932Z,1478874169.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:49.951Z,1478874169.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:50.340Z,1478874170.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:50.345Z,1478874170.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:50.704Z,1478874170.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:51.091Z,1478874171.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:51.136Z,1478874171.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:51.492Z,1478874171.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:51.932Z,1478874171.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:51.941Z,1478874171.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:52.295Z,1478874172.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:52.340Z,1478874172.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:52.698Z,1478874172.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:53.097Z,1478874173.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:53.136Z,1478874173.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:53.501Z,1478874173.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:53.897Z,1478874173.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:53.933Z,1478874173.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:54.321Z,1478874174.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:54.372Z,1478874174.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:54.708Z,1478874174.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:55.108Z,1478874175.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:55.168Z,1478874175.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:55.508Z,1478874175.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:55.953Z,1478874175.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:55.964Z,1478874175.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:56.359Z,1478874176.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:56.689Z,1478874176.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:56.733Z,1478874176.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:57.097Z,1478874177.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:57.488Z,1478874177.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:57.528Z,1478874177.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:57.914Z,1478874177.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:58.324Z,1478874178.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:58.381Z,1478874178.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:58.687Z,1478874178.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:58.736Z,1478874178.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:59.095Z,1478874179.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:59.526Z,1478874179.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:22:59.532Z,1478874179.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:22:59.930Z,1478874179.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:00.255Z,1478874180.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:00.333Z,1478874180.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:00.718Z,1478874180.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:01.054Z,1478874181.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:01.097Z,1478874181.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:01.496Z,1478874181.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:01.848Z,1478874181.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:02.007Z,1478874182.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:02.262Z,1478874182.262 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:02.297Z,1478874182.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:02.700Z,1478874182.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:03.056Z,1478874183.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:03.103Z,1478874183.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:03.493Z,1478874183.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:03.852Z,1478874183.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:03.936Z,1478874183.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:04.266Z,1478874184.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:04.289Z,1478874184.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:04.684Z,1478874184.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:05.061Z,1478874185.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:05.106Z,1478874185.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:05.522Z,1478874185.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:05.856Z,1478874185.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:05.941Z,1478874185.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:06.268Z,1478874186.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:06.287Z,1478874186.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:06.691Z,1478874186.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:07.064Z,1478874187.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:07.137Z,1478874187.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:07.508Z,1478874187.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:07.862Z,1478874187.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:07.961Z,1478874187.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:08.304Z,1478874188.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:08.372Z,1478874188.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:08.705Z,1478874188.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:09.109Z,1478874189.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:09.168Z,1478874189.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:09.485Z,1478874189.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:09.889Z,1478874189.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:09.964Z,1478874189.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:10.361Z,1478874190.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:10.696Z,1478874190.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:10.700Z,1478874190.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:11.133Z,1478874191.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:11.489Z,1478874191.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:11.496Z,1478874191.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:11.896Z,1478874191.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:12.293Z,1478874192.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:12.381Z,1478874192.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:12.704Z,1478874192.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:12.739Z,1478874192.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:13.125Z,1478874193.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:13.498Z,1478874193.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:13.500Z,1478874193.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:13.895Z,1478874193.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:14.289Z,1478874194.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:14.296Z,1478874194.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:14.702Z,1478874194.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:15.092Z,1478874195.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:15.095Z,1478874195.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:15.496Z,1478874195.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:15.888Z,1478874195.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:15.890Z,1478874195.890 [BPC1](ERROR): Failed to receive battery data
2016-11-11T14:23:15.891Z,1478874195.891 [BPC1] Communications Fault, FailCount= 1
2016-11-11T14:23:15.891Z,1478874195.891 [BPC1](ERROR): Communications Fault
2016-11-11T14:23:15.913Z,1478874195.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:15.958Z,1478874195.958 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T14:23:16.308Z,1478874196.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:16.680Z,1478874196.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:16.684Z,1478874196.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:17.106Z,1478874197.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:17.126Z,1478874197.126 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:23:17.126Z,1478874197.126 [BPC1] No Fault, FailCount= 1
2016-11-11T14:23:17.480Z,1478874197.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:17.577Z,1478874197.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:17.915Z,1478874197.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:18.276Z,1478874198.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:18.293Z,1478874198.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:18.701Z,1478874198.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:19.072Z,1478874199.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:19.101Z,1478874199.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:19.501Z,1478874199.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:19.868Z,1478874199.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:19.903Z,1478874199.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:20.301Z,1478874200.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:20.665Z,1478874200.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:20.701Z,1478874200.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:21.105Z,1478874201.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:21.462Z,1478874201.462 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:21.482Z,1478874201.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:21.906Z,1478874201.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:22.258Z,1478874202.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:22.286Z,1478874202.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:22.684Z,1478874202.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:23.052Z,1478874203.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:23.125Z,1478874203.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:23.498Z,1478874203.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:23.848Z,1478874203.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:23.945Z,1478874203.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:24.330Z,1478874204.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:24.648Z,1478874204.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:24.714Z,1478874204.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:25.448Z,1478874205.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:25.952Z,1478874205.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:26.360Z,1478874206.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:26.770Z,1478874206.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:27.180Z,1478874207.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:27.588Z,1478874207.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:27.996Z,1478874207.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:28.404Z,1478874208.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:28.738Z,1478874208.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:28.812Z,1478874208.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:28.866Z,1478874208.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:29.273Z,1478874209.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:29.608Z,1478874209.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:29.613Z,1478874209.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:30.012Z,1478874210.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:30.196Z,1478874210.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:30.418Z,1478874210.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:30.815Z,1478874210.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:30.992Z,1478874210.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:31.217Z,1478874211.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:31.615Z,1478874211.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:31.789Z,1478874211.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:32.017Z,1478874212.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:32.200Z,1478874212.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:32.417Z,1478874212.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:32.814Z,1478874212.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:32.996Z,1478874212.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:33.216Z,1478874213.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:33.633Z,1478874213.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:33.797Z,1478874213.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:34.029Z,1478874214.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:34.220Z,1478874214.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:34.404Z,1478874214.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:34.809Z,1478874214.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:35.017Z,1478874215.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:35.209Z,1478874215.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:35.607Z,1478874215.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:35.812Z,1478874215.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:36.017Z,1478874216.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:36.304Z,1478874216.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:36.419Z,1478874216.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:36.811Z,1478874216.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:37.100Z,1478874217.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:37.221Z,1478874217.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:37.617Z,1478874217.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:37.896Z,1478874217.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:38.020Z,1478874218.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:38.412Z,1478874218.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:38.656Z,1478874218.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:38.833Z,1478874218.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:39.230Z,1478874219.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:39.452Z,1478874219.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:39.609Z,1478874219.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:40.045Z,1478874220.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:40.248Z,1478874220.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:40.416Z,1478874220.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:40.660Z,1478874220.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:40.829Z,1478874220.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:41.217Z,1478874221.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:41.456Z,1478874221.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:41.633Z,1478874221.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:42.021Z,1478874222.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:42.180Z,1478874222.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:42.460Z,1478874222.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:42.814Z,1478874222.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:42.976Z,1478874222.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:43.263Z,1478874223.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:43.638Z,1478874223.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:43.773Z,1478874223.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:44.019Z,1478874224.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:44.184Z,1478874224.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:44.423Z,1478874224.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:44.821Z,1478874224.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:44.980Z,1478874224.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:45.224Z,1478874225.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:45.626Z,1478874225.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:45.788Z,1478874225.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:46.024Z,1478874226.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:46.212Z,1478874226.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:46.420Z,1478874226.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:46.831Z,1478874226.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:47.009Z,1478874227.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:47.204Z,1478874227.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:47.609Z,1478874227.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:47.804Z,1478874227.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:48.034Z,1478874228.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:48.212Z,1478874228.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:48.407Z,1478874228.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:48.807Z,1478874228.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:49.008Z,1478874229.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:49.211Z,1478874229.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:49.610Z,1478874229.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:49.804Z,1478874229.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:50.016Z,1478874230.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:50.276Z,1478874230.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:50.410Z,1478874230.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:50.817Z,1478874230.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:51.072Z,1478874231.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:51.211Z,1478874231.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:51.621Z,1478874231.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:51.868Z,1478874231.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:52.022Z,1478874232.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:52.413Z,1478874232.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:52.628Z,1478874232.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:52.813Z,1478874232.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:53.213Z,1478874233.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:53.424Z,1478874233.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:53.617Z,1478874233.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:54.004Z,1478874234.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:54.221Z,1478874234.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:54.454Z,1478874234.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:54.636Z,1478874234.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:54.812Z,1478874234.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:55.211Z,1478874235.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:55.432Z,1478874235.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:55.617Z,1478874235.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:56.063Z,1478874236.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:56.168Z,1478874236.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:56.418Z,1478874236.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:56.825Z,1478874236.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:56.964Z,1478874236.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:57.257Z,1478874237.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:57.620Z,1478874237.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:57.761Z,1478874237.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:58.054Z,1478874238.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:58.172Z,1478874238.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:58.458Z,1478874238.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:58.820Z,1478874238.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:58.968Z,1478874238.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:23:59.213Z,1478874239.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:59.618Z,1478874239.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:23:59.765Z,1478874239.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:00.022Z,1478874240.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:00.176Z,1478874240.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:00.418Z,1478874240.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:00.813Z,1478874240.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:00.972Z,1478874240.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:01.217Z,1478874241.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:01.612Z,1478874241.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:01.768Z,1478874241.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:02.019Z,1478874242.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:02.176Z,1478874242.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:02.420Z,1478874242.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:02.817Z,1478874242.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:02.972Z,1478874242.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:03.218Z,1478874243.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:03.621Z,1478874243.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:03.768Z,1478874243.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:04.022Z,1478874244.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:04.260Z,1478874244.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:04.418Z,1478874244.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:04.817Z,1478874244.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:05.056Z,1478874245.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:05.217Z,1478874245.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:05.618Z,1478874245.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:05.852Z,1478874245.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:06.020Z,1478874246.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:06.425Z,1478874246.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:06.600Z,1478874246.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:06.828Z,1478874246.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:07.225Z,1478874247.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:07.396Z,1478874247.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:07.616Z,1478874247.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:08.017Z,1478874248.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:08.193Z,1478874248.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:08.415Z,1478874248.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:08.604Z,1478874248.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:08.821Z,1478874248.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:09.249Z,1478874249.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:09.402Z,1478874249.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:09.620Z,1478874249.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:10.024Z,1478874250.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:10.128Z,1478874250.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:10.449Z,1478874250.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:10.820Z,1478874250.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:10.924Z,1478874250.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:11.226Z,1478874251.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:11.639Z,1478874251.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:11.720Z,1478874251.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:12.026Z,1478874252.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:12.140Z,1478874252.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:12.434Z,1478874252.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:12.837Z,1478874252.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:12.936Z,1478874252.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:13.239Z,1478874253.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:13.607Z,1478874253.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:13.732Z,1478874253.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:14.011Z,1478874254.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:14.144Z,1478874254.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:14.414Z,1478874254.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:14.817Z,1478874254.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:14.941Z,1478874254.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:15.211Z,1478874255.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:15.621Z,1478874255.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:15.737Z,1478874255.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:16.009Z,1478874256.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:16.148Z,1478874256.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:16.411Z,1478874256.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:16.814Z,1478874256.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:16.944Z,1478874256.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:17.210Z,1478874257.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:17.612Z,1478874257.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:17.741Z,1478874257.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:18.012Z,1478874258.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:18.220Z,1478874258.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:18.426Z,1478874258.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:18.814Z,1478874258.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:19.016Z,1478874259.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:19.225Z,1478874259.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:19.620Z,1478874259.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:19.812Z,1478874259.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:20.024Z,1478874260.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:20.423Z,1478874260.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:20.580Z,1478874260.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:20.824Z,1478874260.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:21.226Z,1478874261.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:21.376Z,1478874261.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:21.631Z,1478874261.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:22.005Z,1478874262.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:22.173Z,1478874262.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:22.433Z,1478874262.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:22.584Z,1478874262.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:22.830Z,1478874262.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:23.235Z,1478874263.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:23.380Z,1478874263.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:23.647Z,1478874263.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:23.664Z,1478874263.664 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T14:24:23.664Z,1478874263.664 [Default:CheckIn:C.Wait] Stopped
2016-11-11T14:24:23.665Z,1478874263.665 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T14:24:23.665Z,1478874263.665 [Default:CheckIn:D] Running Loop=1
2016-11-11T14:24:24.031Z,1478874264.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:24.042Z,1478874264.042 [Default:CheckIn:D] Stopped
2016-11-11T14:24:24.042Z,1478874264.042 [Default:CheckIn:E] Running Loop=1
2016-11-11T14:24:24.120Z,1478874264.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:24.428Z,1478874264.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:24.437Z,1478874264.437 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 574.378841 min 
2016-11-11T14:24:24.438Z,1478874264.438 [Default:CheckIn:E] Stopped
2016-11-11T14:24:24.438Z,1478874264.438 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T14:24:24.438Z,1478874264.438 [Default:CheckIn] Stopped
2016-11-11T14:24:24.438Z,1478874264.438 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T14:24:24.438Z,1478874264.438 [Default:CheckIn](INFO): Running loop #56
2016-11-11T14:24:24.438Z,1478874264.438 [Default:CheckIn] Running Loop=56
2016-11-11T14:24:24.438Z,1478874264.438 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T14:24:24.438Z,1478874264.438 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T14:24:24.831Z,1478874264.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:24.916Z,1478874264.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:25.715Z,1478874265.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:26.128Z,1478874266.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:26.924Z,1478874266.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:27.720Z,1478874267.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:28.132Z,1478874268.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:28.238Z,1478874268.238 [NAL9602](INFO): Powering up
2016-11-11T14:24:28.290Z,1478874268.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:28.424Z,1478874268.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:28.797Z,1478874268.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:28.929Z,1478874268.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:29.201Z,1478874269.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:29.569Z,1478874269.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:29.724Z,1478874269.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:30.009Z,1478874270.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:30.132Z,1478874270.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:30.407Z,1478874270.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:30.767Z,1478874270.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:30.928Z,1478874270.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:31.176Z,1478874271.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:31.577Z,1478874271.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:31.724Z,1478874271.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:31.971Z,1478874271.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:32.224Z,1478874272.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:32.385Z,1478874272.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:32.782Z,1478874272.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:33.021Z,1478874273.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:33.174Z,1478874273.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:33.582Z,1478874273.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:33.816Z,1478874273.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:33.974Z,1478874273.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:34.374Z,1478874274.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:34.556Z,1478874274.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:34.773Z,1478874274.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:35.182Z,1478874275.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:35.352Z,1478874275.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:35.580Z,1478874275.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:35.985Z,1478874275.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:36.149Z,1478874276.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:36.381Z,1478874276.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:36.562Z,1478874276.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:36.777Z,1478874276.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:37.169Z,1478874277.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:37.356Z,1478874277.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:37.568Z,1478874277.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:37.972Z,1478874277.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:38.084Z,1478874278.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:38.374Z,1478874278.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:38.792Z,1478874278.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:38.880Z,1478874278.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:39.133Z,1478874279.133 [NAL9602](INFO): NAL9602 initialized
2016-11-11T14:24:39.178Z,1478874279.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:39.579Z,1478874279.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:39.677Z,1478874279.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:39.933Z,1478874279.933 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T14:24:39.933Z,1478874279.933 [NAL9602] Data Fault, FailCount= 3
2016-11-11T14:24:39.933Z,1478874279.933 [NAL9602](ERROR): Data Fault
2016-11-11T14:24:39.997Z,1478874279.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:40.043Z,1478874280.043 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T14:24:40.092Z,1478874280.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:40.332Z,1478874280.332 [NAL9602](INFO): Powering down
2016-11-11T14:24:40.389Z,1478874280.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:40.790Z,1478874280.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:40.888Z,1478874280.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:41.209Z,1478874281.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:41.261Z,1478874281.261 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T14:24:41.261Z,1478874281.261 [NAL9602] No Fault, FailCount= 3
2016-11-11T14:24:41.576Z,1478874281.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:41.685Z,1478874281.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:41.980Z,1478874281.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:42.096Z,1478874282.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:42.409Z,1478874282.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:42.769Z,1478874282.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:42.892Z,1478874282.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:43.205Z,1478874283.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:43.573Z,1478874283.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:43.689Z,1478874283.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:44.013Z,1478874284.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:44.101Z,1478874284.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:44.420Z,1478874284.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:44.783Z,1478874284.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:44.896Z,1478874284.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:45.183Z,1478874285.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:45.533Z,1478874285.533 [NAL9602](INFO): Powering up NAL9602
2016-11-11T14:24:45.584Z,1478874285.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:45.692Z,1478874285.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:45.983Z,1478874285.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:46.176Z,1478874286.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:46.377Z,1478874286.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:46.786Z,1478874286.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:46.972Z,1478874286.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:47.181Z,1478874287.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:47.586Z,1478874287.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:47.768Z,1478874287.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:47.970Z,1478874287.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:48.374Z,1478874288.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:48.536Z,1478874288.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:48.773Z,1478874288.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:49.177Z,1478874289.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:49.332Z,1478874289.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:49.577Z,1478874289.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:49.973Z,1478874289.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:50.134Z,1478874290.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:50.380Z,1478874290.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:50.552Z,1478874290.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:50.785Z,1478874290.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:51.180Z,1478874291.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:51.348Z,1478874291.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:51.569Z,1478874291.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:51.999Z,1478874291.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:52.064Z,1478874292.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:52.368Z,1478874292.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:52.771Z,1478874292.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:52.860Z,1478874292.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:53.179Z,1478874293.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:53.575Z,1478874293.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:53.657Z,1478874293.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:53.981Z,1478874293.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:54.072Z,1478874294.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:54.382Z,1478874294.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:54.809Z,1478874294.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:54.868Z,1478874294.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:55.190Z,1478874295.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:55.591Z,1478874295.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:55.664Z,1478874295.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:55.970Z,1478874295.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:56.076Z,1478874296.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:56.385Z,1478874296.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:56.733Z,1478874296.733 [NAL9602](INFO): NAL9602 initialized
2016-11-11T14:24:56.817Z,1478874296.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:56.872Z,1478874296.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:57.172Z,1478874297.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:57.669Z,1478874297.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:57.679Z,1478874297.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:57.991Z,1478874297.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:58.080Z,1478874298.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:58.415Z,1478874298.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:58.793Z,1478874298.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:58.876Z,1478874298.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:59.205Z,1478874299.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:59.587Z,1478874299.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:24:59.672Z,1478874299.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:24:59.984Z,1478874299.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:00.164Z,1478874300.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:00.388Z,1478874300.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:00.789Z,1478874300.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:00.960Z,1478874300.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:01.191Z,1478874301.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:01.581Z,1478874301.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:01.756Z,1478874301.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:02.002Z,1478874302.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:02.395Z,1478874302.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:02.516Z,1478874302.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:02.780Z,1478874302.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:03.167Z,1478874303.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:03.312Z,1478874303.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:03.564Z,1478874303.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:03.979Z,1478874303.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:04.109Z,1478874304.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:04.374Z,1478874304.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:04.520Z,1478874304.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:04.781Z,1478874304.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:05.193Z,1478874305.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:05.316Z,1478874305.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:05.577Z,1478874305.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:05.985Z,1478874305.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:06.056Z,1478874306.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:06.391Z,1478874306.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:06.809Z,1478874306.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:06.852Z,1478874306.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:07.188Z,1478874307.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:07.580Z,1478874307.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:07.648Z,1478874307.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:07.967Z,1478874307.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:08.060Z,1478874308.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:08.387Z,1478874308.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:08.781Z,1478874308.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:08.856Z,1478874308.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:09.177Z,1478874309.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:09.641Z,1478874309.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:09.652Z,1478874309.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:10.003Z,1478874310.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:10.065Z,1478874310.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:10.369Z,1478874310.369 [PNI_TCM](ERROR): CRC does not match. Expected:0x1808 got:0x49150
2016-11-11T14:25:10.406Z,1478874310.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:10.776Z,1478874310.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:10.860Z,1478874310.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:11.217Z,1478874311.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:11.589Z,1478874311.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:11.657Z,1478874311.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:11.963Z,1478874311.963 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T14:25:12.014Z,1478874312.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:12.068Z,1478874312.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:12.370Z,1478874312.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:12.800Z,1478874312.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:12.864Z,1478874312.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:13.209Z,1478874313.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:13.568Z,1478874313.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:13.660Z,1478874313.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:13.991Z,1478874313.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:14.144Z,1478874314.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:14.387Z,1478874314.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:14.801Z,1478874314.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:14.942Z,1478874314.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:15.178Z,1478874315.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:15.581Z,1478874315.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:15.736Z,1478874315.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:15.984Z,1478874315.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:16.393Z,1478874316.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:16.492Z,1478874316.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:16.766Z,1478874316.766 [PNI_TCM](ERROR): CRC does not match. Expected:0x36168 got:0x62215
2016-11-11T14:25:16.786Z,1478874316.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:17.193Z,1478874317.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:17.288Z,1478874317.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:17.581Z,1478874317.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:17.974Z,1478874317.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:18.085Z,1478874318.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:18.386Z,1478874318.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:18.500Z,1478874318.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:18.778Z,1478874318.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:19.185Z,1478874319.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:19.296Z,1478874319.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:19.652Z,1478874319.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:19.974Z,1478874319.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:20.020Z,1478874320.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:20.376Z,1478874320.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:20.777Z,1478874320.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:20.816Z,1478874320.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:21.177Z,1478874321.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:21.613Z,1478874321.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:21.651Z,1478874321.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:21.976Z,1478874321.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:22.032Z,1478874322.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:22.385Z,1478874322.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:22.386Z,1478874322.386 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 172
2016-11-11T14:25:22.386Z,1478874322.386 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:25:22.392Z,1478874322.392 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:22.392Z,1478874322.392 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 172
2016-11-11T14:25:22.393Z,1478874322.392 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:25:22.394Z,1478874322.395 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:22.395Z,1478874322.395 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 172
2016-11-11T14:25:22.395Z,1478874322.395 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:25:22.426Z,1478874322.425 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:25:22.426Z,1478874322.426 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:25:22.426Z,1478874322.426 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:25:22.809Z,1478874322.809 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:25:22.809Z,1478874322.809 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 172
2016-11-11T14:25:22.810Z,1478874322.810 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:25:22.810Z,1478874322.810 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 172
2016-11-11T14:25:22.810Z,1478874322.810 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:25:22.811Z,1478874322.810 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 172
2016-11-11T14:25:22.828Z,1478874322.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:23.188Z,1478874323.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:25:23.188Z,1478874323.188 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:25:23.188Z,1478874323.188 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:25:23.193Z,1478874323.193 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:25:23.193Z,1478874323.194 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:25:23.194Z,1478874323.194 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:25:23.194Z,1478874323.194 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:25:23.195Z,1478874323.195 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:25:23.195Z,1478874323.195 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:25:23.615Z,1478874323.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:23.625Z,1478874323.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:23.973Z,1478874323.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:24.036Z,1478874324.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:24.409Z,1478874324.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:24.776Z,1478874324.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:24.832Z,1478874324.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:25.202Z,1478874325.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:25.629Z,1478874325.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:26.040Z,1478874326.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:26.836Z,1478874326.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:27.632Z,1478874327.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:28.116Z,1478874328.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:28.634Z,1478874328.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:28.762Z,1478874328.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:28.912Z,1478874328.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:29.131Z,1478874329.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:29.509Z,1478874329.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:29.708Z,1478874329.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:29.914Z,1478874329.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:30.345Z,1478874330.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:30.468Z,1478874330.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:30.713Z,1478874330.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:31.137Z,1478874331.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:31.264Z,1478874331.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:31.547Z,1478874331.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:31.913Z,1478874331.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:32.061Z,1478874332.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:32.318Z,1478874332.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:32.472Z,1478874332.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:32.712Z,1478874332.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:33.139Z,1478874333.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:33.268Z,1478874333.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:33.506Z,1478874333.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:33.913Z,1478874333.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:34.008Z,1478874334.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:34.323Z,1478874334.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:34.724Z,1478874334.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:34.804Z,1478874334.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:35.117Z,1478874335.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:35.530Z,1478874335.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:35.600Z,1478874335.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:35.918Z,1478874335.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:36.016Z,1478874336.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:36.318Z,1478874336.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:36.722Z,1478874336.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:36.812Z,1478874336.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:37.122Z,1478874337.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:37.523Z,1478874337.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:37.609Z,1478874337.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:37.928Z,1478874337.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:38.020Z,1478874338.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:38.317Z,1478874338.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:38.741Z,1478874338.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:38.816Z,1478874338.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:39.127Z,1478874339.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:39.521Z,1478874339.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:39.613Z,1478874339.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:39.920Z,1478874339.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:40.024Z,1478874340.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:40.305Z,1478874340.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:40.711Z,1478874340.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:40.821Z,1478874340.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:41.112Z,1478874341.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:41.511Z,1478874341.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:41.616Z,1478874341.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:41.940Z,1478874341.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:42.112Z,1478874342.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:42.326Z,1478874342.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:42.729Z,1478874342.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:42.908Z,1478874342.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:43.121Z,1478874343.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:43.537Z,1478874343.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:43.704Z,1478874343.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:43.919Z,1478874343.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:44.319Z,1478874344.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:44.458Z,1478874344.458 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:44.703Z,1478874344.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:45.127Z,1478874345.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:45.252Z,1478874345.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:45.474Z,1478874345.474 [NAL9602](INFO): SBD MO Status=2, MOMSN=348, MT Status=2, MTMSN=0
2016-11-11T14:25:45.474Z,1478874345.474 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T14:25:45.510Z,1478874345.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:45.976Z,1478874345.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:46.049Z,1478874346.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:46.316Z,1478874346.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:46.460Z,1478874346.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:46.708Z,1478874346.708 [BPC1](ERROR): Failed to receive battery data
2016-11-11T14:25:46.708Z,1478874346.708 [BPC1] Communications Fault, FailCount= 1
2016-11-11T14:25:46.708Z,1478874346.708 [BPC1](ERROR): Communications Fault
2016-11-11T14:25:46.722Z,1478874346.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:46.766Z,1478874346.766 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T14:25:47.115Z,1478874347.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:47.256Z,1478874347.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:47.518Z,1478874347.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:47.920Z,1478874347.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:47.940Z,1478874347.940 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:25:47.940Z,1478874347.940 [BPC1] No Fault, FailCount= 1
2016-11-11T14:25:47.992Z,1478874347.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:48.373Z,1478874348.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:48.746Z,1478874348.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:48.788Z,1478874348.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:49.116Z,1478874349.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:49.502Z,1478874349.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:49.585Z,1478874349.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:49.949Z,1478874349.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:49.996Z,1478874349.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:50.313Z,1478874350.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:50.720Z,1478874350.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:50.793Z,1478874350.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:51.119Z,1478874351.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:51.525Z,1478874351.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:51.589Z,1478874351.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:51.904Z,1478874351.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:51.000Z,1478874352.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:52.308Z,1478874352.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:52.711Z,1478874352.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:52.796Z,1478874352.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:53.136Z,1478874353.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:53.514Z,1478874353.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:53.592Z,1478874353.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:53.927Z,1478874353.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:54.004Z,1478874354.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:54.314Z,1478874354.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:54.720Z,1478874354.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:54.800Z,1478874354.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:55.114Z,1478874355.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:55.521Z,1478874355.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:55.596Z,1478874355.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:55.925Z,1478874355.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:56.072Z,1478874356.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:56.325Z,1478874356.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:56.706Z,1478874356.706 [PNI_TCM](ERROR): CRC does not match. Expected:0x28489 got:0x49579
2016-11-11T14:25:56.733Z,1478874356.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:56.868Z,1478874356.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:57.125Z,1478874357.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:57.516Z,1478874357.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:57.664Z,1478874357.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:57.925Z,1478874357.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:58.313Z,1478874358.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:58.436Z,1478874358.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:58.718Z,1478874358.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:59.115Z,1478874359.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:59.232Z,1478874359.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:25:59.521Z,1478874359.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:25:59.921Z,1478874359.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:00.029Z,1478874360.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:00.294Z,1478874360.293 [PNI_TCM](ERROR): CRC does not match. Expected:0x43662 got:0x45
2016-11-11T14:26:00.329Z,1478874360.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:00.440Z,1478874360.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:00.765Z,1478874360.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:00.806Z,1478874360.806 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T14:26:01.070Z,1478874361.070 [NAL9602](INFO): SBD MO Status=2, MOMSN=348, MT Status=2, MTMSN=0
2016-11-11T14:26:01.070Z,1478874361.070 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T14:26:01.129Z,1478874361.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:01.236Z,1478874361.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:01.558Z,1478874361.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:01.952Z,1478874361.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:01.956Z,1478874361.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:02.321Z,1478874362.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:02.742Z,1478874362.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:02.752Z,1478874362.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:03.139Z,1478874363.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:03.549Z,1478874363.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:03.584Z,1478874363.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:03.913Z,1478874363.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:03.964Z,1478874363.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:04.314Z,1478874364.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:04.718Z,1478874364.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:04.760Z,1478874364.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:05.119Z,1478874365.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:05.556Z,1478874365.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:05.594Z,1478874365.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:05.922Z,1478874365.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:05.969Z,1478874365.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:06.321Z,1478874366.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:06.735Z,1478874366.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:06.764Z,1478874366.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:07.110Z,1478874367.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:07.553Z,1478874367.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:07.561Z,1478874367.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:07.921Z,1478874367.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:07.972Z,1478874367.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:08.317Z,1478874368.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:08.719Z,1478874368.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:08.768Z,1478874368.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:09.121Z,1478874369.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:09.526Z,1478874369.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:09.564Z,1478874369.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:09.920Z,1478874369.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:10.048Z,1478874370.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:10.321Z,1478874370.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:10.725Z,1478874370.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:10.844Z,1478874370.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:11.125Z,1478874371.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:11.509Z,1478874371.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:11.640Z,1478874371.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:11.909Z,1478874371.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:12.340Z,1478874372.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:12.416Z,1478874372.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:12.710Z,1478874372.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:13.114Z,1478874373.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:13.212Z,1478874373.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:13.518Z,1478874373.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:13.911Z,1478874373.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:14.009Z,1478874374.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:14.320Z,1478874374.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:14.420Z,1478874374.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:14.721Z,1478874374.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:15.141Z,1478874375.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:15.216Z,1478874375.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:15.609Z,1478874375.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:15.913Z,1478874375.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:15.948Z,1478874375.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:16.305Z,1478874376.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:16.741Z,1478874376.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:16.744Z,1478874376.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:17.116Z,1478874377.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:17.541Z,1478874377.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:17.598Z,1478874377.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:17.909Z,1478874377.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:17.952Z,1478874377.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:18.350Z,1478874378.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:18.718Z,1478874378.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:18.748Z,1478874378.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:19.119Z,1478874379.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:19.545Z,1478874379.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:19.570Z,1478874379.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:19.920Z,1478874379.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:19.956Z,1478874379.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:20.317Z,1478874380.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:20.718Z,1478874380.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:20.752Z,1478874380.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:21.111Z,1478874381.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:21.549Z,1478874381.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:21.571Z,1478874381.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:21.916Z,1478874381.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:21.960Z,1478874381.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:22.321Z,1478874382.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:22.720Z,1478874382.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:22.756Z,1478874382.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:23.121Z,1478874383.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:23.533Z,1478874383.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:23.552Z,1478874383.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:23.914Z,1478874383.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:24.040Z,1478874384.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:24.311Z,1478874384.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:24.709Z,1478874384.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:24.836Z,1478874384.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:25.074Z,1478874385.074 [NAL9602](INFO): SBD MO Status=2, MOMSN=348, MT Status=2, MTMSN=0
2016-11-11T14:26:25.074Z,1478874385.074 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T14:26:25.125Z,1478874385.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:25.529Z,1478874385.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:25.632Z,1478874385.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:26.396Z,1478874386.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:27.192Z,1478874387.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:27.991Z,1478874387.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:28.404Z,1478874388.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:29.125Z,1478874389.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:29.201Z,1478874389.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:29.255Z,1478874389.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:29.645Z,1478874389.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:29.912Z,1478874389.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:30.043Z,1478874390.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:30.497Z,1478874390.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:30.708Z,1478874390.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:30.845Z,1478874390.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:31.274Z,1478874391.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:31.505Z,1478874391.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:31.649Z,1478874391.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:31.918Z,1478874391.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:32.081Z,1478874392.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:32.461Z,1478874392.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:32.712Z,1478874392.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:32.848Z,1478874392.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:33.247Z,1478874393.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:33.514Z,1478874393.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:33.648Z,1478874393.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:33.944Z,1478874393.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:34.048Z,1478874394.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:34.447Z,1478874394.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:34.740Z,1478874394.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:34.850Z,1478874394.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:35.248Z,1478874395.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:35.536Z,1478874395.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:35.650Z,1478874395.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:35.944Z,1478874395.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:36.042Z,1478874396.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:36.453Z,1478874396.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:36.740Z,1478874396.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:36.833Z,1478874396.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:37.263Z,1478874397.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:37.538Z,1478874397.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:37.693Z,1478874397.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:38.028Z,1478874398.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:38.034Z,1478874398.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:38.441Z,1478874398.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:38.826Z,1478874398.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:38.844Z,1478874398.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:39.245Z,1478874399.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:39.620Z,1478874399.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:39.649Z,1478874399.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:40.066Z,1478874400.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:40.372Z,1478874400.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:40.455Z,1478874400.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:40.849Z,1478874400.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:41.168Z,1478874401.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:41.244Z,1478874401.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:41.643Z,1478874401.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:41.965Z,1478874401.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:42.054Z,1478874402.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:42.376Z,1478874402.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:42.449Z,1478874402.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:42.845Z,1478874402.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:43.172Z,1478874403.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:43.249Z,1478874403.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:43.637Z,1478874403.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:43.896Z,1478874403.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:44.069Z,1478874404.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:44.449Z,1478874404.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:44.692Z,1478874404.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:44.869Z,1478874404.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:45.265Z,1478874405.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:45.491Z,1478874405.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:45.633Z,1478874405.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:45.904Z,1478874405.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:46.065Z,1478874406.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:46.440Z,1478874406.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:46.700Z,1478874406.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:46.877Z,1478874406.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:47.249Z,1478874407.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:47.497Z,1478874407.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:47.685Z,1478874407.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:47.908Z,1478874407.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:48.050Z,1478874408.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:48.444Z,1478874408.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:48.704Z,1478874408.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:48.847Z,1478874408.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:49.242Z,1478874409.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:49.501Z,1478874409.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:49.654Z,1478874409.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:49.912Z,1478874409.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:50.049Z,1478874410.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:50.430Z,1478874410.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:50.708Z,1478874410.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:50.834Z,1478874410.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:51.234Z,1478874411.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:51.504Z,1478874411.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:51.678Z,1478874411.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:51.988Z,1478874411.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:52.043Z,1478874412.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:52.439Z,1478874412.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:52.784Z,1478874412.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:52.838Z,1478874412.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:53.245Z,1478874413.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:53.580Z,1478874413.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:53.648Z,1478874413.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:54.036Z,1478874414.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:54.344Z,1478874414.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:54.438Z,1478874414.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:54.845Z,1478874414.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:55.140Z,1478874415.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:55.245Z,1478874415.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:55.645Z,1478874415.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:55.937Z,1478874415.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:56.054Z,1478874416.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:56.348Z,1478874416.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:56.453Z,1478874416.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:56.838Z,1478874416.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:57.144Z,1478874417.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:57.237Z,1478874417.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:57.641Z,1478874417.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:57.876Z,1478874417.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:58.035Z,1478874418.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:58.447Z,1478874418.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:58.672Z,1478874418.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:58.841Z,1478874418.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:59.269Z,1478874419.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:59.469Z,1478874419.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:26:59.678Z,1478874419.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:26:59.880Z,1478874419.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:00.049Z,1478874420.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:00.465Z,1478874420.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:00.676Z,1478874420.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:00.833Z,1478874420.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:01.267Z,1478874421.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:01.473Z,1478874421.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:01.673Z,1478874421.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:01.888Z,1478874421.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:02.037Z,1478874422.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:02.435Z,1478874422.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:02.684Z,1478874422.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:02.844Z,1478874422.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:03.241Z,1478874423.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:03.481Z,1478874423.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:03.645Z,1478874423.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:03.892Z,1478874423.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:04.046Z,1478874424.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:04.439Z,1478874424.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:04.688Z,1478874424.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:04.841Z,1478874424.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:05.237Z,1478874425.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:05.484Z,1478874425.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:05.642Z,1478874425.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:05.964Z,1478874425.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:06.048Z,1478874426.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:06.441Z,1478874426.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:06.760Z,1478874426.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:06.845Z,1478874426.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:07.238Z,1478874427.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:07.556Z,1478874427.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:07.638Z,1478874427.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:08.049Z,1478874428.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:08.324Z,1478874428.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:08.447Z,1478874428.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:08.838Z,1478874428.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:09.122Z,1478874429.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:09.238Z,1478874429.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:09.645Z,1478874429.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:09.917Z,1478874429.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:10.006Z,1478874430.006 [NAL9602](INFO): SBD MO Status=2, MOMSN=348, MT Status=2, MTMSN=0
2016-11-11T14:27:10.006Z,1478874430.006 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T14:27:10.057Z,1478874430.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:10.332Z,1478874430.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:10.450Z,1478874430.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:10.852Z,1478874430.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:11.130Z,1478874431.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:11.248Z,1478874431.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:11.649Z,1478874431.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:11.856Z,1478874431.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:12.045Z,1478874432.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:12.457Z,1478874432.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:12.652Z,1478874432.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:12.863Z,1478874432.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:13.241Z,1478874433.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:13.449Z,1478874433.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:13.682Z,1478874433.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:13.860Z,1478874433.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:14.086Z,1478874434.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:14.450Z,1478874434.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:14.656Z,1478874434.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:14.886Z,1478874434.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:15.257Z,1478874435.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:15.452Z,1478874435.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:15.688Z,1478874435.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:15.864Z,1478874435.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:16.073Z,1478874436.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:16.444Z,1478874436.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:16.660Z,1478874436.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:16.845Z,1478874436.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:17.245Z,1478874437.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:17.456Z,1478874437.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:17.645Z,1478874437.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:17.868Z,1478874437.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:18.058Z,1478874438.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:18.506Z,1478874438.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:18.664Z,1478874438.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:18.860Z,1478874438.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:19.265Z,1478874439.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:19.460Z,1478874439.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:19.674Z,1478874439.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:19.972Z,1478874439.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:20.090Z,1478874440.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:20.480Z,1478874440.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:20.768Z,1478874440.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:20.866Z,1478874440.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:21.258Z,1478874441.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:21.564Z,1478874441.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:21.669Z,1478874441.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:22.042Z,1478874442.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:22.312Z,1478874442.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:22.442Z,1478874442.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:22.854Z,1478874442.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:23.108Z,1478874443.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:23.257Z,1478874443.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:23.655Z,1478874443.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:23.905Z,1478874443.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:24.072Z,1478874444.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:24.316Z,1478874444.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:24.489Z,1478874444.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:24.883Z,1478874444.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:25.112Z,1478874445.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:25.302Z,1478874445.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:25.662Z,1478874445.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:25.864Z,1478874445.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:26.660Z,1478874446.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:27.456Z,1478874447.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:27.864Z,1478874447.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:28.660Z,1478874448.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:29.456Z,1478874449.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:29.864Z,1478874449.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:30.660Z,1478874450.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:31.456Z,1478874451.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:31.864Z,1478874451.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:32.660Z,1478874452.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:33.456Z,1478874453.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:33.952Z,1478874453.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:34.152Z,1478874454.152 [BPC1](ERROR): Failed to receive battery data
2016-11-11T14:27:34.152Z,1478874454.152 [BPC1] Communications Fault, FailCount= 1
2016-11-11T14:27:34.152Z,1478874454.152 [BPC1](ERROR): Communications Fault
2016-11-11T14:27:34.177Z,1478874454.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:34.288Z,1478874454.288 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T14:27:34.430Z,1478874454.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:34.748Z,1478874454.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:34.765Z,1478874454.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:35.174Z,1478874455.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:35.259Z,1478874455.259 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:27:35.259Z,1478874455.259 [BPC1] No Fault, FailCount= 1
2016-11-11T14:27:35.544Z,1478874455.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:35.682Z,1478874455.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:36.010Z,1478874456.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:36.288Z,1478874456.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:36.349Z,1478874456.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:36.770Z,1478874456.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:37.084Z,1478874457.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:37.186Z,1478874457.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:37.573Z,1478874457.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:37.881Z,1478874457.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:37.986Z,1478874457.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:38.311Z,1478874458.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:38.378Z,1478874458.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:38.778Z,1478874458.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:39.104Z,1478874459.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:39.182Z,1478874459.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:39.559Z,1478874459.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:39.804Z,1478874459.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:39.953Z,1478874459.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:40.366Z,1478874460.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:40.602Z,1478874460.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:40.777Z,1478874460.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:41.147Z,1478874461.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:41.397Z,1478874461.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:41.562Z,1478874461.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:41.808Z,1478874461.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:41.974Z,1478874461.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:42.373Z,1478874462.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:42.604Z,1478874462.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:42.762Z,1478874462.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:43.165Z,1478874463.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:43.400Z,1478874463.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:43.566Z,1478874463.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:43.812Z,1478874463.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:43.958Z,1478874463.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:44.360Z,1478874464.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:44.608Z,1478874464.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:44.769Z,1478874464.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:45.177Z,1478874465.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:45.405Z,1478874465.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:45.609Z,1478874465.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:45.824Z,1478874465.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:45.973Z,1478874465.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:46.339Z,1478874466.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:46.620Z,1478874466.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:46.784Z,1478874466.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:47.157Z,1478874467.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:47.417Z,1478874467.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:47.602Z,1478874467.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:47.920Z,1478874467.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:48.005Z,1478874468.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:48.379Z,1478874468.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:48.716Z,1478874468.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:48.803Z,1478874468.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:49.157Z,1478874469.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:49.513Z,1478874469.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:49.627Z,1478874469.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:49.998Z,1478874469.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:50.260Z,1478874470.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:50.354Z,1478874470.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:50.770Z,1478874470.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:51.056Z,1478874471.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:51.185Z,1478874471.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:51.555Z,1478874471.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:51.852Z,1478874471.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:51.947Z,1478874471.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:52.345Z,1478874472.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:52.648Z,1478874472.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:52.753Z,1478874472.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:53.155Z,1478874473.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:53.444Z,1478874473.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:53.556Z,1478874473.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:53.952Z,1478874473.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:54.240Z,1478874474.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:54.499Z,1478874474.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:54.748Z,1478874474.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:54.765Z,1478874474.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:55.156Z,1478874475.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:55.160Z,1478874475.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:55.561Z,1478874475.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:55.776Z,1478874475.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:55.953Z,1478874475.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:56.350Z,1478874476.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:56.572Z,1478874476.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:56.762Z,1478874476.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:57.162Z,1478874477.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:57.369Z,1478874477.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:57.566Z,1478874477.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:57.780Z,1478874477.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:57.962Z,1478874477.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:58.343Z,1478874478.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:58.576Z,1478874478.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:58.747Z,1478874478.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:59.150Z,1478874479.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:59.375Z,1478874479.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:59.565Z,1478874479.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:27:59.792Z,1478874479.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:27:59.955Z,1478874479.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:00.351Z,1478874480.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:00.588Z,1478874480.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:00.752Z,1478874480.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:01.154Z,1478874481.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:01.384Z,1478874481.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:01.561Z,1478874481.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:01.985Z,1478874481.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:02.180Z,1478874482.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:02.365Z,1478874482.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:02.784Z,1478874482.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:02.976Z,1478874482.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:03.145Z,1478874483.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:03.586Z,1478874483.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:03.773Z,1478874483.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:03.982Z,1478874483.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:04.252Z,1478874484.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:04.354Z,1478874484.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:04.746Z,1478874484.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:05.048Z,1478874485.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:05.155Z,1478874485.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:05.550Z,1478874485.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:05.845Z,1478874485.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:05.952Z,1478874485.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:06.256Z,1478874486.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:06.364Z,1478874486.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:06.761Z,1478874486.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:07.054Z,1478874487.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:07.141Z,1478874487.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:07.539Z,1478874487.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:07.768Z,1478874487.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:07.957Z,1478874487.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:08.365Z,1478874488.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:08.564Z,1478874488.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:08.758Z,1478874488.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:09.151Z,1478874489.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:09.368Z,1478874489.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:09.553Z,1478874489.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:09.784Z,1478874489.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:09.955Z,1478874489.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:10.356Z,1478874490.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:10.580Z,1478874490.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:10.757Z,1478874490.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:11.153Z,1478874491.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:11.377Z,1478874491.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:11.559Z,1478874491.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:11.790Z,1478874491.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:11.954Z,1478874491.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:12.369Z,1478874492.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:12.584Z,1478874492.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:12.767Z,1478874492.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:13.145Z,1478874493.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:13.380Z,1478874493.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:13.553Z,1478874493.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:13.788Z,1478874493.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:13.952Z,1478874493.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:14.354Z,1478874494.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:14.584Z,1478874494.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:14.746Z,1478874494.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:15.146Z,1478874495.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:15.380Z,1478874495.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:15.549Z,1478874495.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:15.852Z,1478874495.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:15.981Z,1478874495.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:16.361Z,1478874496.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:16.648Z,1478874496.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:16.761Z,1478874496.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:17.145Z,1478874497.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:17.444Z,1478874497.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:17.545Z,1478874497.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:17.969Z,1478874497.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:18.216Z,1478874498.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:18.343Z,1478874498.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:18.748Z,1478874498.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:19.014Z,1478874499.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:19.141Z,1478874499.141 [BPC1](ERROR): Failed to receive battery data
2016-11-11T14:28:19.141Z,1478874499.141 [BPC1] Communications Fault, FailCount= 1
2016-11-11T14:28:19.141Z,1478874499.141 [BPC1](ERROR): Communications Fault
2016-11-11T14:28:19.149Z,1478874499.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:19.206Z,1478874499.206 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T14:28:19.548Z,1478874499.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:19.810Z,1478874499.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:19.942Z,1478874499.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:20.224Z,1478874500.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:20.352Z,1478874500.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:20.384Z,1478874500.384 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:28:20.384Z,1478874500.384 [BPC1] No Fault, FailCount= 1
2016-11-11T14:28:20.796Z,1478874500.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:21.020Z,1478874501.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:21.185Z,1478874501.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:21.561Z,1478874501.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:21.740Z,1478874501.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:21.956Z,1478874501.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:22.349Z,1478874502.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:22.536Z,1478874502.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:22.761Z,1478874502.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:23.164Z,1478874503.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:23.338Z,1478874503.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:23.560Z,1478874503.560 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:23.560Z,1478874503.560 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 173
2016-11-11T14:28:23.560Z,1478874503.560 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:28:23.566Z,1478874503.566 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:23.566Z,1478874503.566 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 173
2016-11-11T14:28:23.567Z,1478874503.566 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:28:23.569Z,1478874503.569 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:23.569Z,1478874503.569 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 173
2016-11-11T14:28:23.569Z,1478874503.569 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:28:23.584Z,1478874503.583 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:28:23.584Z,1478874503.584 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:28:23.584Z,1478874503.584 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:28:23.772Z,1478874503.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:24.012Z,1478874504.012 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:28:24.013Z,1478874504.013 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 173
2016-11-11T14:28:24.013Z,1478874504.013 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:28:24.013Z,1478874504.013 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 173
2016-11-11T14:28:24.014Z,1478874504.014 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:28:24.014Z,1478874504.014 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 173
2016-11-11T14:28:24.348Z,1478874504.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:28:24.348Z,1478874504.348 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:28:24.349Z,1478874504.349 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:28:24.353Z,1478874504.353 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:28:24.354Z,1478874504.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:28:24.354Z,1478874504.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:28:24.355Z,1478874504.355 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:28:24.355Z,1478874504.355 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:28:24.355Z,1478874504.355 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:28:24.569Z,1478874504.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:24.744Z,1478874504.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:25.157Z,1478874505.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:25.364Z,1478874505.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:25.559Z,1478874505.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:25.772Z,1478874505.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:25.963Z,1478874505.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:26.568Z,1478874506.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:27.364Z,1478874507.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:27.772Z,1478874507.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:28.568Z,1478874508.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:29.309Z,1478874509.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:29.364Z,1478874509.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:29.518Z,1478874509.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:29.789Z,1478874509.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:29.832Z,1478874509.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:30.180Z,1478874510.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:30.584Z,1478874510.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:30.628Z,1478874510.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:30.991Z,1478874510.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:31.381Z,1478874511.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:31.424Z,1478874511.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:31.834Z,1478874511.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:32.220Z,1478874512.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:32.226Z,1478874512.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:32.576Z,1478874512.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:32.979Z,1478874512.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:33.016Z,1478874513.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:33.418Z,1478874513.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:33.810Z,1478874513.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:33.812Z,1478874513.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:34.234Z,1478874514.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:34.236Z,1478874514.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:34.640Z,1478874514.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:35.009Z,1478874515.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:35.402Z,1478874515.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:35.795Z,1478874515.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:36.193Z,1478874516.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:36.582Z,1478874516.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:36.985Z,1478874516.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:37.402Z,1478874517.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:37.788Z,1478874517.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:38.189Z,1478874518.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:38.602Z,1478874518.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:38.981Z,1478874518.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:39.406Z,1478874519.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:39.796Z,1478874519.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:40.198Z,1478874520.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:40.601Z,1478874520.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:40.989Z,1478874520.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:41.400Z,1478874521.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:41.793Z,1478874521.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:42.203Z,1478874522.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:42.609Z,1478874522.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:43.001Z,1478874523.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:43.443Z,1478874523.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:43.789Z,1478874523.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:44.179Z,1478874524.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:44.589Z,1478874524.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:44.977Z,1478874524.977 [BPC1](ERROR): Failed to parse message.
2016-11-11T14:28:44.977Z,1478874524.977 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T14:28:44.977Z,1478874524.977 [BPC1] Data Fault, FailCount= 1
2016-11-11T14:28:44.977Z,1478874524.977 [BPC1](ERROR): Data Fault
2016-11-11T14:28:44.998Z,1478874524.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:45.043Z,1478874525.043 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T14:28:45.393Z,1478874525.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:45.836Z,1478874525.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:46.197Z,1478874526.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:46.239Z,1478874526.239 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:28:46.239Z,1478874526.239 [BPC1] No Fault, FailCount= 1
2016-11-11T14:28:46.641Z,1478874526.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:47.038Z,1478874527.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:47.377Z,1478874527.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:47.820Z,1478874527.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:48.181Z,1478874528.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:48.581Z,1478874528.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:48.981Z,1478874528.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:49.385Z,1478874529.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:49.782Z,1478874529.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:50.184Z,1478874530.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:50.588Z,1478874530.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:50.990Z,1478874530.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:51.393Z,1478874531.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:51.804Z,1478874531.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:52.182Z,1478874532.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:52.600Z,1478874532.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:52.992Z,1478874532.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:53.393Z,1478874533.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:53.786Z,1478874533.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:54.193Z,1478874534.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:54.592Z,1478874534.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:54.992Z,1478874534.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:55.405Z,1478874535.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:55.802Z,1478874535.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:56.201Z,1478874536.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:56.597Z,1478874536.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:56.977Z,1478874536.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:57.464Z,1478874537.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:57.813Z,1478874537.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:57.820Z,1478874537.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:58.185Z,1478874538.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:58.578Z,1478874538.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:58.616Z,1478874538.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:59.045Z,1478874539.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:59.382Z,1478874539.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:28:59.412Z,1478874539.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:28:59.829Z,1478874539.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:00.140Z,1478874540.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:29:00.237Z,1478874540.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:00.595Z,1478874540.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:00.936Z,1478874540.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:29:01.006Z,1478874541.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:01.435Z,1478874541.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:01.740Z,1478874541.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:29:01.807Z,1478874541.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:02.160Z,1478874542.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:29:02.197Z,1478874542.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:02.577Z,1478874542.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:02.977Z,1478874542.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:03.377Z,1478874543.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:03.777Z,1478874543.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:04.184Z,1478874544.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:04.589Z,1478874544.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:04.990Z,1478874544.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:05.384Z,1478874545.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:05.801Z,1478874545.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:06.201Z,1478874546.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:06.600Z,1478874546.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:06.995Z,1478874546.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:07.384Z,1478874547.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:07.784Z,1478874547.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:08.203Z,1478874548.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:08.585Z,1478874548.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:08.982Z,1478874548.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:09.393Z,1478874549.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:09.787Z,1478874549.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:10.185Z,1478874550.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:10.598Z,1478874550.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:11.007Z,1478874551.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:11.388Z,1478874551.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:11.785Z,1478874551.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:12.076Z,1478874552.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:29:12.198Z,1478874552.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:12.484Z,1478874552.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:29:12.580Z,1478874552.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:12.979Z,1478874552.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:13.406Z,1478874553.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:13.790Z,1478874553.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:14.203Z,1478874554.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:14.618Z,1478874554.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:14.997Z,1478874554.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:15.417Z,1478874555.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:15.805Z,1478874555.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:16.201Z,1478874556.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:16.581Z,1478874556.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:16.981Z,1478874556.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:17.387Z,1478874557.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:17.788Z,1478874557.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:18.191Z,1478874558.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:18.582Z,1478874558.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:18.989Z,1478874558.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:19.391Z,1478874559.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:19.785Z,1478874559.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:20.189Z,1478874560.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:20.595Z,1478874560.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:20.986Z,1478874560.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:21.393Z,1478874561.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:21.789Z,1478874561.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:22.182Z,1478874562.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:22.593Z,1478874562.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:23.002Z,1478874563.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:23.401Z,1478874563.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:23.792Z,1478874563.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:24.197Z,1478874564.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:24.592Z,1478874564.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:24.601Z,1478874564.601 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T14:24:24.4Z
2016-11-11T14:29:24.601Z,1478874564.601 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T14:29:24.601Z,1478874564.601 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T14:29:24.989Z,1478874564.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:25.875Z,1478874565.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:25.998Z,1478874565.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:26.560Z,1478874566.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:29:27.356Z,1478874567.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:29:29.709Z,1478874569.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:29.771Z,1478874569.771 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0224.lzma
2016-11-11T14:29:29.862Z,1478874569.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:30.216Z,1478874570.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:30.573Z,1478874570.573 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0224.lzma.bak
2016-11-11T14:29:30.574Z,1478874570.574 [DataOverHttps](INFO): SBD MOMSN=4555486
2016-11-11T14:29:30.657Z,1478874570.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:31.976Z,1478874571.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:32.141Z,1478874572.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:35.524Z,1478874575.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:35.664Z,1478874575.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:36.030Z,1478874576.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:36.429Z,1478874576.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:36.829Z,1478874576.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:37.257Z,1478874577.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:40.691Z,1478874580.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:40.786Z,1478874580.786 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0225.lzma
2016-11-11T14:29:40.856Z,1478874580.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:41.232Z,1478874581.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:42.258Z,1478874582.258 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0225.lzma.bak
2016-11-11T14:29:42.259Z,1478874582.259 [DataOverHttps](INFO): SBD MOMSN=4555488
2016-11-11T14:29:42.345Z,1478874582.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:43.362Z,1478874583.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:43.396Z,1478874583.396 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T14:29:43.396Z,1478874583.396 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T14:29:43.396Z,1478874583.397 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T14:29:43.499Z,1478874583.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:47.108Z,1478874587.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:47.307Z,1478874587.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:47.609Z,1478874587.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:48.033Z,1478874588.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:48.396Z,1478874588.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:48.843Z,1478874588.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:49.257Z,1478874589.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:49.605Z,1478874589.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:50.006Z,1478874590.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:50.415Z,1478874590.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:50.809Z,1478874590.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:51.224Z,1478874591.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:51.594Z,1478874591.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:51.996Z,1478874591.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:52.392Z,1478874592.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:52.795Z,1478874592.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:53.203Z,1478874593.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:53.610Z,1478874593.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:53.997Z,1478874593.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:54.450Z,1478874594.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:54.799Z,1478874594.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:55.201Z,1478874595.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:55.648Z,1478874595.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:56.005Z,1478874596.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:56.419Z,1478874596.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:56.821Z,1478874596.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:57.229Z,1478874597.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:57.673Z,1478874597.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:58.009Z,1478874598.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:58.409Z,1478874598.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:58.863Z,1478874598.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:59.255Z,1478874599.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:29:59.557Z,1478874599.557 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T14:29:59.592Z,1478874599.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:00.038Z,1478874600.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:00.413Z,1478874600.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:00.831Z,1478874600.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:01.272Z,1478874601.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:01.611Z,1478874601.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:02.010Z,1478874602.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:02.469Z,1478874602.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:02.784Z,1478874602.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:03.254Z,1478874603.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:03.628Z,1478874603.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:03.989Z,1478874603.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:04.397Z,1478874604.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:04.793Z,1478874604.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:05.153Z,1478874605.153 [NAL9602](INFO): Powering down
2016-11-11T14:30:05.221Z,1478874605.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:05.601Z,1478874605.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:05.996Z,1478874605.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:06.396Z,1478874606.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:06.802Z,1478874606.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:07.195Z,1478874607.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:07.602Z,1478874607.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:08.009Z,1478874608.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:08.385Z,1478874608.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:08.791Z,1478874608.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:09.191Z,1478874609.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:09.632Z,1478874609.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:09.996Z,1478874609.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:10.393Z,1478874610.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:10.795Z,1478874610.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:11.193Z,1478874611.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:11.625Z,1478874611.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:12.004Z,1478874612.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:12.395Z,1478874612.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:12.794Z,1478874612.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:13.207Z,1478874613.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:13.634Z,1478874613.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:14.068Z,1478874614.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:14.441Z,1478874614.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:14.806Z,1478874614.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:15.233Z,1478874615.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:15.637Z,1478874615.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:15.993Z,1478874615.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:16.414Z,1478874616.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:16.803Z,1478874616.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:17.252Z,1478874617.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:17.634Z,1478874617.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:18.021Z,1478874618.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:18.410Z,1478874618.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:18.816Z,1478874618.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:19.272Z,1478874619.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:19.612Z,1478874619.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:20.005Z,1478874620.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:20.411Z,1478874620.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:20.796Z,1478874620.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:21.230Z,1478874621.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:21.602Z,1478874621.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:21.993Z,1478874621.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:22.392Z,1478874622.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:22.797Z,1478874622.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:23.193Z,1478874623.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:23.674Z,1478874623.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:24.012Z,1478874624.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:24.394Z,1478874624.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:24.796Z,1478874624.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:25.196Z,1478874625.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:25.654Z,1478874625.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:26.011Z,1478874626.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:26.392Z,1478874626.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:26.794Z,1478874626.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:27.201Z,1478874627.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:27.605Z,1478874627.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:27.993Z,1478874627.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:28.410Z,1478874628.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:28.804Z,1478874628.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:29.206Z,1478874629.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:29.641Z,1478874629.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:30.009Z,1478874630.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:30.445Z,1478874630.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:30.821Z,1478874630.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:31.257Z,1478874631.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:31.609Z,1478874631.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:32.021Z,1478874632.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:32.415Z,1478874632.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:32.794Z,1478874632.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:33.217Z,1478874633.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:33.603Z,1478874633.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:34.019Z,1478874634.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:34.397Z,1478874634.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:34.813Z,1478874634.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:35.264Z,1478874635.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:35.649Z,1478874635.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:36.017Z,1478874636.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:36.390Z,1478874636.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:36.813Z,1478874636.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:37.205Z,1478874637.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:37.677Z,1478874637.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:38.005Z,1478874638.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:38.405Z,1478874638.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:38.816Z,1478874638.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:39.190Z,1478874639.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:39.644Z,1478874639.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:40.004Z,1478874640.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:40.394Z,1478874640.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:40.805Z,1478874640.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:41.194Z,1478874641.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:41.609Z,1478874641.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:41.996Z,1478874641.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:42.398Z,1478874642.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:42.802Z,1478874642.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:43.210Z,1478874643.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:43.596Z,1478874643.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:44.029Z,1478874644.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:47.606Z,1478874647.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:47.739Z,1478874647.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:48.149Z,1478874648.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:48.521Z,1478874648.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:48.950Z,1478874648.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:49.357Z,1478874649.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:49.718Z,1478874649.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:50.116Z,1478874650.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:50.513Z,1478874650.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:50.917Z,1478874650.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:51.317Z,1478874651.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:51.713Z,1478874651.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:52.113Z,1478874652.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:52.513Z,1478874652.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:52.923Z,1478874652.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:53.313Z,1478874653.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:53.717Z,1478874653.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:54.122Z,1478874654.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:54.513Z,1478874654.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:54.920Z,1478874654.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:55.311Z,1478874655.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:55.733Z,1478874655.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:56.101Z,1478874656.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:56.535Z,1478874656.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:56.909Z,1478874656.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:57.309Z,1478874657.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:57.709Z,1478874657.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:58.113Z,1478874658.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:58.511Z,1478874658.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:58.917Z,1478874658.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:59.319Z,1478874659.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:30:59.718Z,1478874659.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:00.155Z,1478874660.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:00.512Z,1478874660.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:00.913Z,1478874660.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:01.374Z,1478874661.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:01.722Z,1478874661.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:02.120Z,1478874662.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:02.538Z,1478874662.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:02.925Z,1478874662.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:03.368Z,1478874663.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:03.737Z,1478874663.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:04.124Z,1478874664.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:04.516Z,1478874664.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:04.930Z,1478874664.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:05.329Z,1478874665.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:05.709Z,1478874665.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:06.109Z,1478874666.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:06.517Z,1478874666.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:06.908Z,1478874666.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:07.310Z,1478874667.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:07.717Z,1478874667.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:08.114Z,1478874668.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:08.517Z,1478874668.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:08.921Z,1478874668.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:09.312Z,1478874669.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:09.720Z,1478874669.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:10.121Z,1478874670.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:10.514Z,1478874670.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:10.917Z,1478874670.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:11.322Z,1478874671.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:11.725Z,1478874671.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:12.119Z,1478874672.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:12.521Z,1478874672.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:12.924Z,1478874672.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:13.333Z,1478874673.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:13.718Z,1478874673.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:14.120Z,1478874674.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:14.519Z,1478874674.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:14.918Z,1478874674.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:15.343Z,1478874675.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:15.753Z,1478874675.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:16.121Z,1478874676.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:16.511Z,1478874676.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:16.934Z,1478874676.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:17.313Z,1478874677.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:17.741Z,1478874677.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:18.139Z,1478874678.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:18.525Z,1478874678.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:18.929Z,1478874678.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:19.327Z,1478874679.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:19.729Z,1478874679.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:20.129Z,1478874680.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:20.509Z,1478874680.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:20.929Z,1478874680.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:21.308Z,1478874681.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:21.717Z,1478874681.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:22.113Z,1478874682.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:22.511Z,1478874682.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:22.912Z,1478874682.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:23.322Z,1478874683.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:23.712Z,1478874683.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:24.113Z,1478874684.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:24.525Z,1478874684.526 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:24.526Z,1478874684.526 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 174
2016-11-11T14:31:24.526Z,1478874684.526 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:31:24.532Z,1478874684.532 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:24.533Z,1478874684.533 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 174
2016-11-11T14:31:24.533Z,1478874684.533 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:31:24.536Z,1478874684.536 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:24.536Z,1478874684.536 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 174
2016-11-11T14:31:24.536Z,1478874684.536 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:31:24.573Z,1478874684.573 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:31:24.573Z,1478874684.573 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:31:24.574Z,1478874684.574 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:31:24.945Z,1478874684.945 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:31:24.945Z,1478874684.945 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 174
2016-11-11T14:31:24.946Z,1478874684.946 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:31:24.946Z,1478874684.946 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 174
2016-11-11T14:31:24.947Z,1478874684.947 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:31:24.947Z,1478874684.947 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 174
2016-11-11T14:31:25.312Z,1478874685.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:31:25.312Z,1478874685.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:31:25.313Z,1478874685.313 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:31:25.317Z,1478874685.317 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:31:25.318Z,1478874685.318 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:31:25.318Z,1478874685.318 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:31:25.319Z,1478874685.319 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:31:25.319Z,1478874685.319 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:31:25.319Z,1478874685.319 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:31:25.724Z,1478874685.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:26.124Z,1478874686.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:26.533Z,1478874686.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:26.925Z,1478874686.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:27.311Z,1478874687.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:27.717Z,1478874687.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:28.117Z,1478874688.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:28.516Z,1478874688.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:28.918Z,1478874688.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:29.309Z,1478874689.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:29.708Z,1478874689.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:30.170Z,1478874690.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:30.552Z,1478874690.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:30.911Z,1478874690.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:31.319Z,1478874691.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:31.734Z,1478874691.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:32.112Z,1478874692.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:32.541Z,1478874692.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:32.942Z,1478874692.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:33.317Z,1478874693.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:33.723Z,1478874693.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:34.128Z,1478874694.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:34.516Z,1478874694.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:34.930Z,1478874694.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:35.308Z,1478874695.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:35.709Z,1478874695.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:36.114Z,1478874696.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:36.509Z,1478874696.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:36.911Z,1478874696.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:37.324Z,1478874697.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:37.724Z,1478874697.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:38.114Z,1478874698.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:38.516Z,1478874698.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:38.920Z,1478874698.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:39.319Z,1478874699.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:39.710Z,1478874699.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:40.116Z,1478874700.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:40.512Z,1478874700.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:40.914Z,1478874700.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:41.313Z,1478874701.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:41.712Z,1478874701.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:42.123Z,1478874702.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:42.515Z,1478874702.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:42.921Z,1478874702.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:43.322Z,1478874703.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:43.718Z,1478874703.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:44.128Z,1478874704.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:47.558Z,1478874707.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:47.681Z,1478874707.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:48.069Z,1478874708.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:48.509Z,1478874708.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:48.869Z,1478874708.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:49.301Z,1478874709.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:49.701Z,1478874709.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:50.064Z,1478874710.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:50.474Z,1478874710.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:50.909Z,1478874710.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:51.281Z,1478874711.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:51.673Z,1478874711.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:52.060Z,1478874712.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:52.469Z,1478874712.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:52.869Z,1478874712.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:53.269Z,1478874713.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:53.668Z,1478874713.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:54.069Z,1478874714.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:54.475Z,1478874714.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:54.871Z,1478874714.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:55.287Z,1478874715.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:55.661Z,1478874715.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:56.085Z,1478874716.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:56.462Z,1478874716.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:56.868Z,1478874716.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:57.264Z,1478874717.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:57.673Z,1478874717.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:58.076Z,1478874718.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:58.473Z,1478874718.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:58.865Z,1478874718.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:59.274Z,1478874719.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:31:59.672Z,1478874719.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:00.077Z,1478874720.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:00.468Z,1478874720.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:00.873Z,1478874720.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:01.273Z,1478874721.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:01.749Z,1478874721.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:02.057Z,1478874722.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:02.469Z,1478874722.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:02.904Z,1478874722.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:03.283Z,1478874723.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:03.708Z,1478874723.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:04.093Z,1478874724.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:04.456Z,1478874724.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:04.861Z,1478874724.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:05.264Z,1478874725.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:05.669Z,1478874725.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:06.081Z,1478874726.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:06.472Z,1478874726.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:06.863Z,1478874726.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:07.290Z,1478874727.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:07.655Z,1478874727.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:08.065Z,1478874728.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:08.465Z,1478874728.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:08.869Z,1478874728.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:09.261Z,1478874729.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:09.665Z,1478874729.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:10.059Z,1478874730.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:10.460Z,1478874730.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:10.879Z,1478874730.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:11.293Z,1478874731.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:11.676Z,1478874731.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:12.083Z,1478874732.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:12.490Z,1478874732.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:12.883Z,1478874732.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:13.293Z,1478874733.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:13.659Z,1478874733.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:14.065Z,1478874734.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:14.478Z,1478874734.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:14.867Z,1478874734.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:15.268Z,1478874735.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:15.676Z,1478874735.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:16.141Z,1478874736.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:16.534Z,1478874736.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:16.871Z,1478874736.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:17.317Z,1478874737.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:17.701Z,1478874737.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:18.105Z,1478874738.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:18.489Z,1478874738.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:18.939Z,1478874738.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:19.299Z,1478874739.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:19.705Z,1478874739.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:20.070Z,1478874740.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:20.473Z,1478874740.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:20.886Z,1478874740.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:21.293Z,1478874741.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:21.701Z,1478874741.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:22.085Z,1478874742.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:22.482Z,1478874742.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:22.963Z,1478874742.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:23.287Z,1478874743.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:23.697Z,1478874743.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:24.071Z,1478874744.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:24.509Z,1478874744.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:24.880Z,1478874744.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:25.274Z,1478874745.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:25.694Z,1478874745.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:26.077Z,1478874746.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:26.484Z,1478874746.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:26.901Z,1478874746.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:27.329Z,1478874747.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:27.708Z,1478874747.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:28.081Z,1478874748.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:28.488Z,1478874748.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:28.936Z,1478874748.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:29.289Z,1478874749.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:29.702Z,1478874749.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:30.104Z,1478874750.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:30.479Z,1478874750.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:30.914Z,1478874750.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:31.294Z,1478874751.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:31.673Z,1478874751.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:32.090Z,1478874752.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:32.506Z,1478874752.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:32.853Z,1478874752.853 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T14:32:32.946Z,1478874752.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:33.302Z,1478874753.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:33.661Z,1478874753.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:34.081Z,1478874754.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:34.454Z,1478874754.454 [PNI_TCM](ERROR): CRC does not match. Expected:0x10242 got:0x21302
2016-11-11T14:32:34.481Z,1478874754.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:34.865Z,1478874754.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:35.261Z,1478874755.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:35.677Z,1478874755.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:36.050Z,1478874756.050 [PNI_TCM](ERROR): CRC does not match. Expected:0x7953 got:0x24630
2016-11-11T14:32:36.077Z,1478874756.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:36.460Z,1478874756.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:36.860Z,1478874756.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:37.275Z,1478874757.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:37.662Z,1478874757.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:38.099Z,1478874758.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:38.465Z,1478874758.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:38.858Z,1478874758.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:39.265Z,1478874759.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:39.661Z,1478874759.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:40.081Z,1478874760.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:40.465Z,1478874760.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:40.862Z,1478874760.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:41.260Z,1478874761.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:41.658Z,1478874761.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:42.069Z,1478874762.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:42.466Z,1478874762.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:42.860Z,1478874762.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:43.265Z,1478874763.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:43.665Z,1478874763.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:44.102Z,1478874764.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:44.465Z,1478874764.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:48.021Z,1478874768.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:48.129Z,1478874768.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:48.493Z,1478874768.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:48.924Z,1478874768.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:49.288Z,1478874769.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:49.717Z,1478874769.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:50.114Z,1478874770.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:50.489Z,1478874770.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:50.901Z,1478874770.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:51.289Z,1478874771.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:51.688Z,1478874771.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:52.097Z,1478874772.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:52.484Z,1478874772.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:52.901Z,1478874772.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:53.293Z,1478874773.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:53.684Z,1478874773.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:54.088Z,1478874774.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:54.493Z,1478874774.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:54.889Z,1478874774.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:55.284Z,1478874775.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:55.698Z,1478874775.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:56.116Z,1478874776.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:56.532Z,1478874776.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:56.893Z,1478874776.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:57.350Z,1478874777.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:57.718Z,1478874777.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:58.108Z,1478874778.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:58.513Z,1478874778.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:58.902Z,1478874778.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:59.301Z,1478874779.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:32:59.721Z,1478874779.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:00.094Z,1478874780.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:00.502Z,1478874780.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:00.942Z,1478874780.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:01.326Z,1478874781.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:01.697Z,1478874781.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:02.121Z,1478874782.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:02.502Z,1478874782.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:02.915Z,1478874782.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:03.301Z,1478874783.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:03.705Z,1478874783.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:04.101Z,1478874784.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:04.502Z,1478874784.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:04.923Z,1478874784.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:05.279Z,1478874785.279 [BPC1](ERROR): Failed to receive battery data
2016-11-11T14:33:05.279Z,1478874785.279 [BPC1] Communications Fault, FailCount= 1
2016-11-11T14:33:05.279Z,1478874785.279 [BPC1](ERROR): Communications Fault
2016-11-11T14:33:05.304Z,1478874785.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:05.365Z,1478874785.365 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T14:33:05.705Z,1478874785.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:06.102Z,1478874786.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:06.502Z,1478874786.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:06.550Z,1478874786.550 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:33:06.550Z,1478874786.550 [BPC1] No Fault, FailCount= 1
2016-11-11T14:33:07.006Z,1478874787.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:07.318Z,1478874787.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:07.686Z,1478874787.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:08.101Z,1478874788.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:08.502Z,1478874788.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:08.913Z,1478874788.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:09.301Z,1478874789.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:09.702Z,1478874789.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:10.106Z,1478874790.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:10.493Z,1478874790.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:10.888Z,1478874790.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:11.391Z,1478874791.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:11.712Z,1478874791.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:12.109Z,1478874792.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:12.489Z,1478874792.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:12.893Z,1478874792.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:13.345Z,1478874793.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:13.700Z,1478874793.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:14.097Z,1478874794.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:14.491Z,1478874794.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:14.930Z,1478874794.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:15.297Z,1478874795.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:15.704Z,1478874795.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:16.089Z,1478874796.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:16.493Z,1478874796.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:16.946Z,1478874796.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:17.296Z,1478874797.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:17.691Z,1478874797.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:18.141Z,1478874798.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:18.492Z,1478874798.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:18.929Z,1478874798.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:19.301Z,1478874799.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:19.717Z,1478874799.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:20.105Z,1478874800.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:20.517Z,1478874800.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:20.947Z,1478874800.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:21.306Z,1478874801.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:21.689Z,1478874801.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:22.089Z,1478874802.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:22.492Z,1478874802.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:22.889Z,1478874802.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:23.305Z,1478874803.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:23.691Z,1478874803.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:24.094Z,1478874804.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:24.501Z,1478874804.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:24.902Z,1478874804.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:25.350Z,1478874805.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:25.701Z,1478874805.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:26.102Z,1478874806.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:26.509Z,1478874806.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:26.903Z,1478874806.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:27.358Z,1478874807.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:27.692Z,1478874807.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:28.097Z,1478874808.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:28.497Z,1478874808.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:28.910Z,1478874808.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:29.301Z,1478874809.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:29.697Z,1478874809.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:30.091Z,1478874810.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:30.501Z,1478874810.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:30.910Z,1478874810.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:31.294Z,1478874811.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:31.725Z,1478874811.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:32.104Z,1478874812.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:32.500Z,1478874812.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:32.930Z,1478874812.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:33.312Z,1478874813.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:33.709Z,1478874813.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:34.115Z,1478874814.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:34.489Z,1478874814.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:34.925Z,1478874814.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:35.318Z,1478874815.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:35.689Z,1478874815.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:36.088Z,1478874816.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:36.493Z,1478874816.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:36.968Z,1478874816.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:37.287Z,1478874817.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:37.691Z,1478874817.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:38.097Z,1478874818.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:38.491Z,1478874818.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:38.890Z,1478874818.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:39.330Z,1478874819.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:39.704Z,1478874819.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:40.108Z,1478874820.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:40.504Z,1478874820.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:40.900Z,1478874820.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:41.327Z,1478874821.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:41.688Z,1478874821.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:42.090Z,1478874822.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:42.493Z,1478874822.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:42.897Z,1478874822.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:43.296Z,1478874823.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:43.690Z,1478874823.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:44.096Z,1478874824.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:44.501Z,1478874824.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:48.117Z,1478874828.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:48.257Z,1478874828.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:48.625Z,1478874828.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:49.008Z,1478874829.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:49.421Z,1478874829.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:49.825Z,1478874829.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:50.220Z,1478874830.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:50.592Z,1478874830.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:50.997Z,1478874830.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:51.392Z,1478874831.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:51.798Z,1478874831.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:52.201Z,1478874832.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:52.601Z,1478874832.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:53.008Z,1478874833.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:53.398Z,1478874833.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:53.803Z,1478874833.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:54.200Z,1478874834.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:54.611Z,1478874834.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:55.001Z,1478874835.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:55.400Z,1478874835.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:55.807Z,1478874835.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:56.209Z,1478874836.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:56.600Z,1478874836.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:57.006Z,1478874837.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:57.417Z,1478874837.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:57.808Z,1478874837.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:58.197Z,1478874838.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:58.597Z,1478874838.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:59.020Z,1478874839.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:59.399Z,1478874839.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:33:59.800Z,1478874839.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:00.199Z,1478874840.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:00.648Z,1478874840.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:01.004Z,1478874841.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:01.402Z,1478874841.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:01.818Z,1478874841.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:02.210Z,1478874842.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:02.598Z,1478874842.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:03.042Z,1478874843.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:03.400Z,1478874843.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:03.834Z,1478874843.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:04.234Z,1478874844.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:04.601Z,1478874844.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:05.006Z,1478874845.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:05.408Z,1478874845.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:05.813Z,1478874845.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:06.207Z,1478874846.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:06.608Z,1478874846.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:07.002Z,1478874847.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:07.400Z,1478874847.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:07.807Z,1478874847.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:08.213Z,1478874848.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:08.608Z,1478874848.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:09.012Z,1478874849.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:09.410Z,1478874849.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:09.812Z,1478874849.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:10.212Z,1478874850.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:10.609Z,1478874850.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:11.013Z,1478874851.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:11.397Z,1478874851.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:11.801Z,1478874851.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:12.209Z,1478874852.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:12.600Z,1478874852.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:13.003Z,1478874853.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:13.411Z,1478874853.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:13.810Z,1478874853.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:14.213Z,1478874854.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:14.637Z,1478874854.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:15.021Z,1478874855.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:15.421Z,1478874855.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:15.813Z,1478874855.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:16.245Z,1478874856.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:16.595Z,1478874856.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:17.004Z,1478874857.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:17.435Z,1478874857.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:17.805Z,1478874857.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:18.246Z,1478874858.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:18.626Z,1478874858.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:19.009Z,1478874859.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:19.402Z,1478874859.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:19.808Z,1478874859.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:20.207Z,1478874860.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:20.602Z,1478874860.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:21.010Z,1478874861.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:21.391Z,1478874861.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:21.798Z,1478874861.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:22.201Z,1478874862.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:22.610Z,1478874862.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:22.999Z,1478874862.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:23.405Z,1478874863.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:23.809Z,1478874863.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:24.201Z,1478874864.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:24.608Z,1478874864.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:25.009Z,1478874865.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:25.409Z,1478874865.409 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:25.409Z,1478874865.409 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 175
2016-11-11T14:34:25.409Z,1478874865.409 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:34:25.416Z,1478874865.416 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:25.417Z,1478874865.417 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 175
2016-11-11T14:34:25.417Z,1478874865.417 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:34:25.419Z,1478874865.419 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:25.419Z,1478874865.419 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 175
2016-11-11T14:34:25.419Z,1478874865.419 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:34:25.449Z,1478874865.450 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:34:25.450Z,1478874865.450 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:34:25.450Z,1478874865.450 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:34:25.833Z,1478874865.833 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:34:25.833Z,1478874865.833 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 175
2016-11-11T14:34:25.834Z,1478874865.834 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:34:25.834Z,1478874865.834 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 175
2016-11-11T14:34:25.835Z,1478874865.835 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:34:25.835Z,1478874865.835 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 175
2016-11-11T14:34:26.211Z,1478874866.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:34:26.211Z,1478874866.211 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:34:26.212Z,1478874866.212 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:34:26.216Z,1478874866.216 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:34:26.217Z,1478874866.217 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:34:26.217Z,1478874866.217 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:34:26.217Z,1478874866.217 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:34:26.218Z,1478874866.218 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:34:26.218Z,1478874866.218 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:34:26.597Z,1478874866.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:27.009Z,1478874867.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:27.401Z,1478874867.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:27.805Z,1478874867.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:28.198Z,1478874868.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:28.605Z,1478874868.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:29.001Z,1478874869.001 [BPC1](ERROR): Failed to parse message.
2016-11-11T14:34:29.001Z,1478874869.001 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T14:34:29.001Z,1478874869.001 [BPC1] Data Fault, FailCount= 1
2016-11-11T14:34:29.001Z,1478874869.001 [BPC1](ERROR): Data Fault
2016-11-11T14:34:29.009Z,1478874869.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:29.058Z,1478874869.058 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T14:34:29.409Z,1478874869.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:29.809Z,1478874869.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:30.208Z,1478874870.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:30.251Z,1478874870.251 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:34:30.251Z,1478874870.251 [BPC1] No Fault, FailCount= 1
2016-11-11T14:34:30.663Z,1478874870.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:31.030Z,1478874871.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:31.392Z,1478874871.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:31.805Z,1478874871.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:32.205Z,1478874872.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:32.604Z,1478874872.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:33.005Z,1478874873.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:33.398Z,1478874873.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:33.803Z,1478874873.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:34.208Z,1478874874.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:34.606Z,1478874874.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:35.007Z,1478874875.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:35.407Z,1478874875.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:35.810Z,1478874875.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:36.209Z,1478874876.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:36.609Z,1478874876.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:37.001Z,1478874877.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:37.417Z,1478874877.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:37.797Z,1478874877.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:38.199Z,1478874878.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:38.603Z,1478874878.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:39.003Z,1478874879.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:39.395Z,1478874879.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:39.804Z,1478874879.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:40.198Z,1478874880.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:40.602Z,1478874880.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:41.013Z,1478874881.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:41.401Z,1478874881.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:41.833Z,1478874881.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:42.212Z,1478874882.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:42.615Z,1478874882.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:43.029Z,1478874883.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:43.400Z,1478874883.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:43.799Z,1478874883.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:43.808Z,1478874883.808 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T14:34:43.808Z,1478874883.808 [Default:CheckIn:C.Wait] Stopped
2016-11-11T14:34:43.808Z,1478874883.808 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T14:34:43.808Z,1478874883.808 [Default:CheckIn:D] Running Loop=1
2016-11-11T14:34:44.199Z,1478874884.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:44.208Z,1478874884.208 [Default:CheckIn:D] Stopped
2016-11-11T14:34:44.208Z,1478874884.208 [Default:CheckIn:E] Running Loop=1
2016-11-11T14:34:44.639Z,1478874884.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:44.648Z,1478874884.648 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 584.714974 min 
2016-11-11T14:34:44.648Z,1478874884.648 [Default:CheckIn:E] Stopped
2016-11-11T14:34:44.648Z,1478874884.648 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T14:34:44.649Z,1478874884.648 [Default:CheckIn] Stopped
2016-11-11T14:34:44.649Z,1478874884.649 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T14:34:44.649Z,1478874884.649 [Default:CheckIn](INFO): Running loop #57
2016-11-11T14:34:44.649Z,1478874884.649 [Default:CheckIn] Running Loop=57
2016-11-11T14:34:44.649Z,1478874884.649 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T14:34:44.649Z,1478874884.649 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T14:34:47.928Z,1478874887.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:48.020Z,1478874888.020 [NAL9602](INFO): Powering up
2016-11-11T14:34:48.101Z,1478874888.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:48.428Z,1478874888.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:48.861Z,1478874888.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:49.259Z,1478874889.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:49.637Z,1478874889.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:50.027Z,1478874890.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:50.437Z,1478874890.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:50.845Z,1478874890.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:51.233Z,1478874891.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:51.650Z,1478874891.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:52.027Z,1478874892.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:52.429Z,1478874892.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:52.825Z,1478874892.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:53.228Z,1478874893.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:53.633Z,1478874893.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:54.027Z,1478874894.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:54.435Z,1478874894.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:54.837Z,1478874894.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:55.227Z,1478874895.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:55.627Z,1478874895.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:56.032Z,1478874896.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:56.427Z,1478874896.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:56.835Z,1478874896.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:57.229Z,1478874897.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:57.628Z,1478874897.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:58.035Z,1478874898.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:58.442Z,1478874898.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:58.845Z,1478874898.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:59.193Z,1478874899.193 [NAL9602](INFO): NAL9602 initialized
2016-11-11T14:34:59.239Z,1478874899.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:59.657Z,1478874899.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:34:59.997Z,1478874899.997 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T14:34:59.997Z,1478874899.997 [NAL9602] Data Fault, FailCount= 4
2016-11-11T14:34:59.997Z,1478874899.997 [NAL9602](ERROR): Data Fault
2016-11-11T14:35:00.061Z,1478874900.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:00.102Z,1478874900.102 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T14:35:00.393Z,1478874900.393 [NAL9602](INFO): Powering down
2016-11-11T14:35:00.449Z,1478874900.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:00.913Z,1478874900.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:01.227Z,1478874901.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:01.263Z,1478874901.263 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T14:35:01.264Z,1478874901.263 [NAL9602] No Fault, FailCount= 4
2016-11-11T14:35:01.667Z,1478874901.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:02.028Z,1478874902.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:02.466Z,1478874902.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:02.870Z,1478874902.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:03.231Z,1478874903.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:03.631Z,1478874903.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:04.031Z,1478874904.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:04.433Z,1478874904.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:04.828Z,1478874904.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:05.238Z,1478874905.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:05.589Z,1478874905.589 [NAL9602](INFO): Powering up NAL9602
2016-11-11T14:35:05.641Z,1478874905.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:06.028Z,1478874906.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:06.439Z,1478874906.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:06.841Z,1478874906.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:07.238Z,1478874907.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:07.636Z,1478874907.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:08.040Z,1478874908.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:08.436Z,1478874908.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:08.844Z,1478874908.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:09.248Z,1478874909.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:09.645Z,1478874909.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:10.025Z,1478874910.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:10.454Z,1478874910.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:10.845Z,1478874910.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:11.229Z,1478874911.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:11.629Z,1478874911.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:12.029Z,1478874912.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:12.433Z,1478874912.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:12.837Z,1478874912.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:13.234Z,1478874913.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:13.669Z,1478874913.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:14.033Z,1478874914.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:14.437Z,1478874914.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:14.881Z,1478874914.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:15.239Z,1478874915.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:15.661Z,1478874915.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:16.041Z,1478874916.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:16.479Z,1478874916.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:16.793Z,1478874916.793 [NAL9602](INFO): NAL9602 initialized
2016-11-11T14:35:16.841Z,1478874916.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:17.259Z,1478874917.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:17.650Z,1478874917.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:18.053Z,1478874918.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:18.453Z,1478874918.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:18.845Z,1478874918.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:19.225Z,1478874919.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:19.651Z,1478874919.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:20.024Z,1478874920.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:20.439Z,1478874920.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:20.837Z,1478874920.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:21.226Z,1478874921.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:21.627Z,1478874921.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:22.028Z,1478874922.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:22.431Z,1478874922.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:22.844Z,1478874922.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:23.237Z,1478874923.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:23.637Z,1478874923.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:24.030Z,1478874924.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:24.437Z,1478874924.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:24.843Z,1478874924.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:25.242Z,1478874925.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:25.633Z,1478874925.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:26.037Z,1478874926.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:26.436Z,1478874926.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:26.839Z,1478874926.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:27.237Z,1478874927.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:27.636Z,1478874927.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:28.040Z,1478874928.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:28.465Z,1478874928.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:28.836Z,1478874928.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:29.269Z,1478874929.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:29.623Z,1478874929.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:30.062Z,1478874930.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:30.429Z,1478874930.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:30.863Z,1478874930.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:31.227Z,1478874931.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:31.663Z,1478874931.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:32.037Z,1478874932.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:32.428Z,1478874932.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:32.837Z,1478874932.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:33.235Z,1478874933.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:33.645Z,1478874933.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:34.053Z,1478874934.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:34.425Z,1478874934.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:34.825Z,1478874934.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:35.229Z,1478874935.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:35.629Z,1478874935.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:36.024Z,1478874936.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:36.427Z,1478874936.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:36.837Z,1478874936.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:37.231Z,1478874937.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:37.633Z,1478874937.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:38.042Z,1478874938.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:38.438Z,1478874938.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:38.846Z,1478874938.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:39.241Z,1478874939.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:39.636Z,1478874939.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:40.037Z,1478874940.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:40.441Z,1478874940.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:40.841Z,1478874940.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:41.236Z,1478874941.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:41.645Z,1478874941.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:42.052Z,1478874942.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:42.449Z,1478874942.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:42.842Z,1478874942.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:43.245Z,1478874943.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:43.681Z,1478874943.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:44.033Z,1478874944.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:44.428Z,1478874944.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:44.861Z,1478874944.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:48.222Z,1478874948.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:48.370Z,1478874948.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:48.742Z,1478874948.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:49.124Z,1478874949.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:49.499Z,1478874949.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:49.897Z,1478874949.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:50.309Z,1478874950.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:50.698Z,1478874950.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:51.098Z,1478874951.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:51.501Z,1478874951.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:51.905Z,1478874951.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:52.309Z,1478874952.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:52.717Z,1478874952.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:53.109Z,1478874953.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:53.505Z,1478874953.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:53.909Z,1478874953.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:54.304Z,1478874954.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:54.710Z,1478874954.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:55.137Z,1478874955.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:55.513Z,1478874955.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:55.903Z,1478874955.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:56.321Z,1478874956.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:56.772Z,1478874956.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:57.113Z,1478874957.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:57.494Z,1478874957.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:57.898Z,1478874957.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:58.309Z,1478874958.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:58.717Z,1478874958.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:59.171Z,1478874959.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:59.498Z,1478874959.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:35:59.907Z,1478874959.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:00.329Z,1478874960.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:00.793Z,1478874960.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:00.839Z,1478874960.839 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T14:36:01.174Z,1478874961.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:01.513Z,1478874961.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:01.914Z,1478874961.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:02.306Z,1478874962.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:02.729Z,1478874962.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:03.091Z,1478874963.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:03.525Z,1478874963.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:03.924Z,1478874963.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:04.291Z,1478874964.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:04.692Z,1478874964.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:05.125Z,1478874965.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:05.509Z,1478874965.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:05.900Z,1478874965.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:06.297Z,1478874966.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:06.713Z,1478874966.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:07.101Z,1478874967.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:07.502Z,1478874967.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:07.898Z,1478874967.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:08.302Z,1478874968.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:08.707Z,1478874968.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:09.100Z,1478874969.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:09.513Z,1478874969.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:09.913Z,1478874969.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:10.307Z,1478874970.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:10.752Z,1478874970.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:11.095Z,1478874971.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:11.495Z,1478874971.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:11.937Z,1478874971.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:12.336Z,1478874972.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:12.700Z,1478874972.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:13.132Z,1478874973.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:13.530Z,1478874973.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:13.915Z,1478874973.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:14.317Z,1478874974.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:14.711Z,1478874974.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:15.126Z,1478874975.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:15.541Z,1478874975.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:15.972Z,1478874975.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:16.325Z,1478874976.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:16.719Z,1478874976.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:17.129Z,1478874977.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:17.516Z,1478874977.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:17.921Z,1478874977.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:18.325Z,1478874978.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:18.720Z,1478874978.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:19.094Z,1478874979.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:19.494Z,1478874979.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:19.901Z,1478874979.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:20.299Z,1478874980.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:20.713Z,1478874980.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:21.107Z,1478874981.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:21.501Z,1478874981.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:21.902Z,1478874981.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:22.314Z,1478874982.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:22.718Z,1478874982.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:23.108Z,1478874983.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:23.515Z,1478874983.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:23.911Z,1478874983.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:24.291Z,1478874984.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:24.726Z,1478874984.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:25.125Z,1478874985.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:25.494Z,1478874985.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:25.898Z,1478874985.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:26.305Z,1478874986.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:26.717Z,1478874986.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:27.112Z,1478874987.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:27.501Z,1478874987.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:27.912Z,1478874987.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:28.341Z,1478874988.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:28.725Z,1478874988.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:29.106Z,1478874989.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:29.509Z,1478874989.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:29.908Z,1478874989.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:30.357Z,1478874990.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:30.721Z,1478874990.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:31.154Z,1478874991.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:31.512Z,1478874991.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:31.918Z,1478874991.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:32.329Z,1478874992.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:32.690Z,1478874992.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:33.098Z,1478874993.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:33.524Z,1478874993.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:33.929Z,1478874993.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:34.326Z,1478874994.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:34.698Z,1478874994.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:35.108Z,1478874995.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:35.509Z,1478874995.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:35.900Z,1478874995.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:36.301Z,1478874996.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:36.709Z,1478874996.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:37.110Z,1478874997.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:37.499Z,1478874997.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:37.909Z,1478874997.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:38.300Z,1478874998.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:38.732Z,1478874998.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:39.101Z,1478874999.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:39.525Z,1478874999.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:39.917Z,1478874999.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:40.303Z,1478875000.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:40.711Z,1478875000.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:41.091Z,1478875001.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:41.517Z,1478875001.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:41.925Z,1478875001.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:42.298Z,1478875002.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:42.698Z,1478875002.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:43.105Z,1478875003.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:43.507Z,1478875003.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:43.910Z,1478875003.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:44.357Z,1478875004.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:44.721Z,1478875004.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:45.129Z,1478875005.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:48.576Z,1478875008.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:48.734Z,1478875008.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:49.063Z,1478875009.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:49.505Z,1478875009.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:49.863Z,1478875009.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:50.272Z,1478875010.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:50.692Z,1478875010.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:51.091Z,1478875011.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:51.461Z,1478875011.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:51.861Z,1478875011.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:52.295Z,1478875012.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:52.701Z,1478875012.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:53.075Z,1478875013.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:53.472Z,1478875013.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:53.871Z,1478875013.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:54.267Z,1478875014.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:54.673Z,1478875014.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:55.067Z,1478875015.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:55.477Z,1478875015.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:55.877Z,1478875015.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:56.269Z,1478875016.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:56.678Z,1478875016.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:57.085Z,1478875017.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:57.458Z,1478875017.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:57.865Z,1478875017.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:58.264Z,1478875018.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:58.673Z,1478875018.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:59.073Z,1478875019.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:59.468Z,1478875019.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:36:59.868Z,1478875019.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:00.268Z,1478875020.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:00.672Z,1478875020.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:01.125Z,1478875021.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:01.581Z,1478875021.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:01.876Z,1478875021.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:02.280Z,1478875022.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:02.701Z,1478875022.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:03.081Z,1478875023.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:03.493Z,1478875023.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:03.889Z,1478875023.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:04.265Z,1478875024.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:04.702Z,1478875024.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:05.060Z,1478875025.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:05.495Z,1478875025.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:05.910Z,1478875025.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:06.264Z,1478875026.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:06.682Z,1478875026.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:07.073Z,1478875027.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:07.477Z,1478875027.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:07.877Z,1478875027.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:08.276Z,1478875028.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:08.677Z,1478875028.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:09.077Z,1478875029.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:09.476Z,1478875029.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:09.894Z,1478875029.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:10.287Z,1478875030.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:10.688Z,1478875030.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:11.070Z,1478875031.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:11.469Z,1478875031.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:11.906Z,1478875031.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:12.276Z,1478875032.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:12.677Z,1478875032.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:13.073Z,1478875033.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:13.473Z,1478875033.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:13.865Z,1478875033.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:14.275Z,1478875034.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:14.676Z,1478875034.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:15.070Z,1478875035.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:15.466Z,1478875035.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:15.917Z,1478875035.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:16.274Z,1478875036.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:16.675Z,1478875036.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:17.092Z,1478875037.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:17.476Z,1478875037.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:17.925Z,1478875037.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:18.352Z,1478875038.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:18.678Z,1478875038.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:19.076Z,1478875039.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:19.484Z,1478875039.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:19.890Z,1478875039.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:20.312Z,1478875040.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:20.698Z,1478875040.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:21.113Z,1478875041.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:21.504Z,1478875041.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:21.886Z,1478875041.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:22.306Z,1478875042.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:22.714Z,1478875042.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:23.066Z,1478875043.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:23.542Z,1478875043.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:23.912Z,1478875043.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:24.296Z,1478875044.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:24.721Z,1478875044.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:25.113Z,1478875045.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:25.477Z,1478875045.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:25.873Z,1478875045.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:26.298Z,1478875046.298 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:26.298Z,1478875046.298 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 176
2016-11-11T14:37:26.298Z,1478875046.298 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:37:26.315Z,1478875046.315 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:26.315Z,1478875046.316 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 176
2016-11-11T14:37:26.316Z,1478875046.316 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:37:26.318Z,1478875046.318 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:26.318Z,1478875046.318 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 176
2016-11-11T14:37:26.318Z,1478875046.318 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:37:26.338Z,1478875046.339 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:37:26.339Z,1478875046.339 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:37:26.339Z,1478875046.339 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:37:26.764Z,1478875046.764 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:37:26.764Z,1478875046.764 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 176
2016-11-11T14:37:26.765Z,1478875046.765 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:37:26.765Z,1478875046.765 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 176
2016-11-11T14:37:26.766Z,1478875046.766 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:37:26.766Z,1478875046.766 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 176
2016-11-11T14:37:27.097Z,1478875047.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:37:27.098Z,1478875047.098 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:37:27.098Z,1478875047.098 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:37:27.103Z,1478875047.103 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:37:27.103Z,1478875047.103 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:37:27.104Z,1478875047.104 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:37:27.104Z,1478875047.104 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:37:27.105Z,1478875047.105 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:37:27.105Z,1478875047.105 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:37:27.485Z,1478875047.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:27.865Z,1478875047.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:28.308Z,1478875048.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:28.709Z,1478875048.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:29.079Z,1478875049.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:29.482Z,1478875049.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:29.915Z,1478875049.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:30.305Z,1478875050.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:30.694Z,1478875050.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:31.101Z,1478875051.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:31.521Z,1478875051.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:31.904Z,1478875051.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:32.289Z,1478875052.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:32.676Z,1478875052.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:33.082Z,1478875053.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:33.520Z,1478875053.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:33.900Z,1478875053.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:34.278Z,1478875054.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:34.755Z,1478875054.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:35.109Z,1478875055.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:35.481Z,1478875055.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:35.915Z,1478875055.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:36.280Z,1478875056.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:36.714Z,1478875056.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:37.095Z,1478875057.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:37.462Z,1478875057.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:37.870Z,1478875057.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:38.287Z,1478875058.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:38.675Z,1478875058.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:39.067Z,1478875059.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:39.461Z,1478875059.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:39.865Z,1478875059.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:40.264Z,1478875060.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:40.664Z,1478875060.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:41.057Z,1478875061.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:41.464Z,1478875061.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:41.856Z,1478875061.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:42.261Z,1478875062.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:42.672Z,1478875062.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:43.075Z,1478875063.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:43.475Z,1478875063.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:43.871Z,1478875063.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:44.289Z,1478875064.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:44.681Z,1478875064.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:45.060Z,1478875065.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:45.461Z,1478875065.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:48.833Z,1478875068.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:48.969Z,1478875068.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:49.337Z,1478875069.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:49.733Z,1478875069.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:50.109Z,1478875070.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:50.515Z,1478875070.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:50.929Z,1478875070.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:51.329Z,1478875071.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:51.717Z,1478875071.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:52.120Z,1478875072.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:52.509Z,1478875072.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:52.912Z,1478875072.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:53.301Z,1478875073.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:53.709Z,1478875073.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:54.105Z,1478875074.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:54.513Z,1478875074.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:54.929Z,1478875074.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:55.306Z,1478875075.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:55.717Z,1478875075.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:56.112Z,1478875076.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:56.525Z,1478875076.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:56.913Z,1478875076.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:57.306Z,1478875077.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:57.705Z,1478875077.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:58.110Z,1478875078.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:58.509Z,1478875078.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:58.920Z,1478875078.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:59.311Z,1478875079.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:37:59.719Z,1478875079.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:00.115Z,1478875080.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:00.509Z,1478875080.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:00.900Z,1478875080.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:01.304Z,1478875081.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:01.770Z,1478875081.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:02.118Z,1478875082.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:02.578Z,1478875082.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:02.949Z,1478875082.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:03.302Z,1478875083.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:03.827Z,1478875083.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:04.141Z,1478875084.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:04.538Z,1478875084.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:04.962Z,1478875084.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:05.323Z,1478875085.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:05.738Z,1478875085.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:06.107Z,1478875086.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:06.538Z,1478875086.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:06.955Z,1478875086.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:07.310Z,1478875087.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:07.733Z,1478875087.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:08.142Z,1478875088.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:08.536Z,1478875088.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:08.934Z,1478875088.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:09.326Z,1478875089.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:09.734Z,1478875089.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:10.132Z,1478875090.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:10.524Z,1478875090.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:10.902Z,1478875090.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:11.319Z,1478875091.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:11.730Z,1478875091.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:12.121Z,1478875092.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:12.542Z,1478875092.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:12.910Z,1478875092.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:13.321Z,1478875093.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:13.722Z,1478875093.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:14.105Z,1478875094.105 [BPC1](ERROR): Failed to parse message.
2016-11-11T14:38:14.105Z,1478875094.105 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T14:38:14.105Z,1478875094.105 [BPC1] Data Fault, FailCount= 1
2016-11-11T14:38:14.106Z,1478875094.106 [BPC1](ERROR): Data Fault
2016-11-11T14:38:14.145Z,1478875094.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:14.202Z,1478875094.202 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T14:38:14.534Z,1478875094.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:14.938Z,1478875094.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:15.325Z,1478875095.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:15.399Z,1478875095.399 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:38:15.399Z,1478875095.399 [BPC1] No Fault, FailCount= 1
2016-11-11T14:38:15.849Z,1478875095.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:16.182Z,1478875096.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:16.606Z,1478875096.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:16.936Z,1478875096.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:17.313Z,1478875097.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:17.714Z,1478875097.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:18.132Z,1478875098.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:18.510Z,1478875098.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:18.946Z,1478875098.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:19.319Z,1478875099.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:19.717Z,1478875099.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:20.122Z,1478875100.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:20.522Z,1478875100.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:20.927Z,1478875100.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:21.316Z,1478875101.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:21.715Z,1478875101.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:22.117Z,1478875102.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:22.520Z,1478875102.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:22.909Z,1478875102.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:23.326Z,1478875103.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:23.706Z,1478875103.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:24.109Z,1478875104.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:24.565Z,1478875104.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:24.922Z,1478875104.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:25.332Z,1478875105.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:25.733Z,1478875105.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:26.120Z,1478875106.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:26.532Z,1478875106.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:26.918Z,1478875106.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:27.305Z,1478875107.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:27.753Z,1478875107.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:28.112Z,1478875108.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:28.515Z,1478875108.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:28.953Z,1478875108.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:29.317Z,1478875109.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:29.770Z,1478875109.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:30.139Z,1478875110.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:30.555Z,1478875110.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:30.921Z,1478875110.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:31.317Z,1478875111.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:31.717Z,1478875111.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:32.118Z,1478875112.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:32.517Z,1478875112.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:32.925Z,1478875112.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:33.310Z,1478875113.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:33.721Z,1478875113.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:34.118Z,1478875114.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:34.514Z,1478875114.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:34.936Z,1478875114.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:35.333Z,1478875115.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:35.725Z,1478875115.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:36.138Z,1478875116.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:36.523Z,1478875116.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:36.905Z,1478875116.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:37.308Z,1478875117.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:37.713Z,1478875117.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:38.116Z,1478875118.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:38.509Z,1478875118.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:38.916Z,1478875118.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:39.318Z,1478875119.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:39.719Z,1478875119.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:40.122Z,1478875120.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:40.526Z,1478875120.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:40.957Z,1478875120.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:41.365Z,1478875121.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:41.720Z,1478875121.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:42.120Z,1478875122.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:42.545Z,1478875122.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:42.925Z,1478875122.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:43.305Z,1478875123.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:43.743Z,1478875123.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:44.100Z,1478875124.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:44.574Z,1478875124.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:44.961Z,1478875124.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:45.321Z,1478875125.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:45.726Z,1478875125.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:49.234Z,1478875129.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:49.381Z,1478875129.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:49.746Z,1478875129.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:50.136Z,1478875130.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:50.544Z,1478875130.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:50.952Z,1478875130.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:51.354Z,1478875131.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:51.745Z,1478875131.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:52.149Z,1478875132.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:52.548Z,1478875132.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:52.930Z,1478875132.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:53.333Z,1478875133.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:53.734Z,1478875133.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:54.133Z,1478875134.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:54.539Z,1478875134.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:54.939Z,1478875134.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:55.338Z,1478875135.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:55.789Z,1478875135.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:56.157Z,1478875136.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:56.557Z,1478875136.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:56.970Z,1478875136.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:57.335Z,1478875137.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:57.768Z,1478875137.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:58.179Z,1478875138.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:58.545Z,1478875138.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:58.965Z,1478875138.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:59.361Z,1478875139.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:38:59.749Z,1478875139.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:00.124Z,1478875140.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:00.557Z,1478875140.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:00.955Z,1478875140.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:01.383Z,1478875141.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:01.760Z,1478875141.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:02.157Z,1478875142.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:02.546Z,1478875142.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:02.993Z,1478875142.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:03.345Z,1478875143.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:03.745Z,1478875143.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:04.141Z,1478875144.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:04.549Z,1478875144.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:04.924Z,1478875144.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:05.330Z,1478875145.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:05.733Z,1478875145.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:06.141Z,1478875146.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:06.549Z,1478875146.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:06.954Z,1478875146.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:07.344Z,1478875147.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:07.741Z,1478875147.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:08.145Z,1478875148.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:08.550Z,1478875148.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:08.953Z,1478875148.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:09.350Z,1478875149.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:09.761Z,1478875149.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:10.135Z,1478875150.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:10.565Z,1478875150.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:10.933Z,1478875150.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:11.381Z,1478875151.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:11.749Z,1478875151.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:12.179Z,1478875152.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:12.549Z,1478875152.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:12.974Z,1478875152.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:13.374Z,1478875153.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:13.756Z,1478875153.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:14.181Z,1478875154.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:14.568Z,1478875154.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:14.957Z,1478875154.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:15.349Z,1478875155.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:15.752Z,1478875155.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:16.135Z,1478875156.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:16.561Z,1478875156.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:16.954Z,1478875156.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:17.361Z,1478875157.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:17.777Z,1478875157.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:18.136Z,1478875158.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:18.544Z,1478875158.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:18.962Z,1478875158.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:19.360Z,1478875159.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:19.737Z,1478875159.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:20.135Z,1478875160.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:20.539Z,1478875160.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:20.941Z,1478875160.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:21.336Z,1478875161.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:21.748Z,1478875161.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:22.153Z,1478875162.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:22.557Z,1478875162.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:22.952Z,1478875162.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:23.347Z,1478875163.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:23.749Z,1478875163.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:24.157Z,1478875164.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:24.547Z,1478875164.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:24.946Z,1478875164.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:25.366Z,1478875165.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:25.749Z,1478875165.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:26.140Z,1478875166.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:26.561Z,1478875166.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:26.951Z,1478875166.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:27.376Z,1478875167.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:27.773Z,1478875167.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:28.163Z,1478875168.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:28.533Z,1478875168.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:28.933Z,1478875168.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:29.343Z,1478875169.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:29.738Z,1478875169.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:30.141Z,1478875170.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:30.577Z,1478875170.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:30.717Z,1478875170.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:30.965Z,1478875170.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:31.128Z,1478875171.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:31.336Z,1478875171.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:31.735Z,1478875171.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:31.924Z,1478875171.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:32.149Z,1478875172.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:32.544Z,1478875172.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:32.660Z,1478875172.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:32.953Z,1478875172.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:33.357Z,1478875173.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:33.456Z,1478875173.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:33.756Z,1478875173.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:34.160Z,1478875174.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:34.253Z,1478875174.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:34.555Z,1478875174.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:34.668Z,1478875174.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:34.944Z,1478875174.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:35.364Z,1478875175.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:35.464Z,1478875175.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:35.777Z,1478875175.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:36.145Z,1478875176.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:36.261Z,1478875176.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:36.531Z,1478875176.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:36.672Z,1478875176.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:36.961Z,1478875176.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:37.357Z,1478875177.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:37.468Z,1478875177.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:37.767Z,1478875177.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:38.145Z,1478875178.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:38.265Z,1478875178.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:38.577Z,1478875178.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:38.676Z,1478875178.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:38.940Z,1478875178.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:39.338Z,1478875179.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:39.472Z,1478875179.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:39.765Z,1478875179.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:40.142Z,1478875180.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:40.268Z,1478875180.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:40.545Z,1478875180.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:40.748Z,1478875180.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:40.961Z,1478875180.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:41.347Z,1478875181.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:41.544Z,1478875181.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:41.762Z,1478875181.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:42.155Z,1478875182.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:42.340Z,1478875182.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:42.562Z,1478875182.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:42.961Z,1478875182.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:43.104Z,1478875183.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:43.361Z,1478875183.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:43.757Z,1478875183.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:43.900Z,1478875183.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:44.132Z,1478875184.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:44.530Z,1478875184.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:44.696Z,1478875184.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:44.934Z,1478875184.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:44.970Z,1478875184.970 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T14:34:44.6Z
2016-11-11T14:39:44.970Z,1478875184.970 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T14:39:44.970Z,1478875184.970 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T14:39:45.108Z,1478875185.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:45.338Z,1478875185.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:45.904Z,1478875185.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:46.181Z,1478875186.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:46.664Z,1478875186.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:47.460Z,1478875187.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:48.256Z,1478875188.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:48.664Z,1478875188.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:49.460Z,1478875189.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:49.538Z,1478875189.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:49.588Z,1478875189.588 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0228.lzma
2016-11-11T14:39:49.689Z,1478875189.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:50.051Z,1478875190.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:50.256Z,1478875190.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:50.370Z,1478875190.370 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0228.lzma.bak
2016-11-11T14:39:50.370Z,1478875190.370 [DataOverHttps](INFO): SBD MOMSN=4555493
2016-11-11T14:39:50.452Z,1478875190.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:50.664Z,1478875190.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:51.460Z,1478875191.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:51.700Z,1478875191.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:51.822Z,1478875191.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:52.256Z,1478875192.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:52.664Z,1478875192.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:53.460Z,1478875193.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:54.256Z,1478875194.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:54.721Z,1478875194.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:55.399Z,1478875195.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:55.516Z,1478875195.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:55.558Z,1478875195.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:55.922Z,1478875195.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:56.312Z,1478875196.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:56.365Z,1478875196.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:56.759Z,1478875196.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:57.084Z,1478875197.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:57.137Z,1478875197.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:39:57.880Z,1478875197.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:58.677Z,1478875198.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:59.088Z,1478875199.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:39:59.884Z,1478875199.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:00.567Z,1478875200.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:00.608Z,1478875200.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:00.616Z,1478875200.616 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0229.lzma
2016-11-11T14:40:00.702Z,1478875200.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:01.052Z,1478875201.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:01.397Z,1478875201.397 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0229.lzma.bak
2016-11-11T14:40:01.397Z,1478875201.397 [DataOverHttps](INFO): SBD MOMSN=4555495
2016-11-11T14:40:01.404Z,1478875201.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:01.460Z,1478875201.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:02.201Z,1478875202.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:02.612Z,1478875202.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:02.794Z,1478875202.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:02.803Z,1478875202.803 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T14:40:02.803Z,1478875202.803 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T14:40:02.803Z,1478875202.803 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T14:40:02.937Z,1478875202.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:03.408Z,1478875203.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:04.205Z,1478875204.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:04.616Z,1478875204.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:05.412Z,1478875205.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:06.209Z,1478875206.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:06.518Z,1478875206.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:06.620Z,1478875206.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:06.662Z,1478875206.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:07.061Z,1478875207.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:07.416Z,1478875207.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:07.449Z,1478875207.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:07.834Z,1478875207.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:08.212Z,1478875208.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:08.284Z,1478875208.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:08.649Z,1478875208.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:08.704Z,1478875208.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:09.042Z,1478875209.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:09.442Z,1478875209.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:09.500Z,1478875209.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:09.846Z,1478875209.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:10.244Z,1478875210.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:10.296Z,1478875210.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:10.708Z,1478875210.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:11.064Z,1478875211.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:11.081Z,1478875211.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:11.445Z,1478875211.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:11.845Z,1478875211.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:11.864Z,1478875211.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:12.246Z,1478875212.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:12.660Z,1478875212.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:12.734Z,1478875212.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:13.029Z,1478875213.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:13.088Z,1478875213.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:13.425Z,1478875213.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:13.862Z,1478875213.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:13.885Z,1478875213.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:14.249Z,1478875214.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:14.572Z,1478875214.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:14.655Z,1478875214.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:15.055Z,1478875215.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:15.368Z,1478875215.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:15.441Z,1478875215.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:15.832Z,1478875215.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:16.165Z,1478875216.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:16.245Z,1478875216.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:16.576Z,1478875216.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:16.659Z,1478875216.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:17.048Z,1478875217.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:17.372Z,1478875217.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:17.457Z,1478875217.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:17.849Z,1478875217.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:18.169Z,1478875218.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:18.269Z,1478875218.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:18.580Z,1478875218.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:18.645Z,1478875218.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:19.037Z,1478875219.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:19.376Z,1478875219.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:19.453Z,1478875219.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:19.793Z,1478875219.793 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T14:40:19.848Z,1478875219.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:20.173Z,1478875220.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:20.289Z,1478875220.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:20.584Z,1478875220.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:20.643Z,1478875220.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:21.040Z,1478875221.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:21.380Z,1478875221.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:21.445Z,1478875221.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:21.837Z,1478875221.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:22.176Z,1478875222.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:22.302Z,1478875222.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:22.639Z,1478875222.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:22.680Z,1478875222.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:23.041Z,1478875223.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:23.440Z,1478875223.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:23.476Z,1478875223.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:23.840Z,1478875223.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:24.250Z,1478875224.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:24.272Z,1478875224.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:24.651Z,1478875224.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:25.033Z,1478875225.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:25.068Z,1478875225.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:25.393Z,1478875225.392 [NAL9602](INFO): Powering down
2016-11-11T14:40:25.428Z,1478875225.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:25.833Z,1478875225.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:25.864Z,1478875225.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:26.254Z,1478875226.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:26.641Z,1478875226.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:26.660Z,1478875226.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:27.033Z,1478875227.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:27.442Z,1478875227.442 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:27.442Z,1478875227.442 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 177
2016-11-11T14:40:27.442Z,1478875227.442 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:40:27.449Z,1478875227.449 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:27.449Z,1478875227.449 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 177
2016-11-11T14:40:27.449Z,1478875227.449 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:40:27.451Z,1478875227.451 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:27.451Z,1478875227.451 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 177
2016-11-11T14:40:27.451Z,1478875227.451 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:40:27.456Z,1478875227.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:27.466Z,1478875227.466 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:40:27.467Z,1478875227.467 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:40:27.467Z,1478875227.467 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:40:27.849Z,1478875227.849 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:40:27.850Z,1478875227.849 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 177
2016-11-11T14:40:27.850Z,1478875227.850 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:40:27.850Z,1478875227.850 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 177
2016-11-11T14:40:27.851Z,1478875227.851 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:40:27.851Z,1478875227.851 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 177
2016-11-11T14:40:28.252Z,1478875228.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:28.257Z,1478875228.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:40:28.257Z,1478875228.257 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:40:28.258Z,1478875228.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:40:28.262Z,1478875228.263 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:40:28.263Z,1478875228.263 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:40:28.264Z,1478875228.264 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:40:28.264Z,1478875228.264 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:40:28.264Z,1478875228.264 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:40:28.265Z,1478875228.265 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:40:28.627Z,1478875228.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:29.048Z,1478875229.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:29.054Z,1478875229.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:29.461Z,1478875229.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:29.829Z,1478875229.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:29.844Z,1478875229.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:30.233Z,1478875230.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:30.624Z,1478875230.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:30.640Z,1478875230.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:31.030Z,1478875231.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:31.437Z,1478875231.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:31.459Z,1478875231.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:31.828Z,1478875231.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:32.227Z,1478875232.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:32.232Z,1478875232.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:32.629Z,1478875232.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:33.028Z,1478875233.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:33.029Z,1478875233.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:33.425Z,1478875233.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:33.824Z,1478875233.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:33.830Z,1478875233.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:34.224Z,1478875234.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:34.620Z,1478875234.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:34.629Z,1478875234.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:35.032Z,1478875235.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:35.416Z,1478875235.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:35.429Z,1478875235.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:35.831Z,1478875235.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:36.213Z,1478875236.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:36.245Z,1478875236.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:36.624Z,1478875236.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:37.009Z,1478875237.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:37.025Z,1478875237.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:37.429Z,1478875237.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:37.806Z,1478875237.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:37.825Z,1478875237.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:38.233Z,1478875238.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:38.601Z,1478875238.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:38.637Z,1478875238.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:39.024Z,1478875239.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:39.396Z,1478875239.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:39.446Z,1478875239.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:39.829Z,1478875239.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:40.192Z,1478875240.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:40.225Z,1478875240.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:40.633Z,1478875240.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:40.988Z,1478875240.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:41.038Z,1478875241.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:41.449Z,1478875241.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:41.788Z,1478875241.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:41.846Z,1478875241.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:42.293Z,1478875242.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:42.596Z,1478875242.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:42.644Z,1478875242.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:43.036Z,1478875243.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:40:43.053Z,1478875243.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:43.429Z,1478875243.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:43.861Z,1478875243.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:44.253Z,1478875244.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:44.633Z,1478875244.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:45.037Z,1478875245.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:45.437Z,1478875245.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:45.833Z,1478875245.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:46.234Z,1478875246.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:46.630Z,1478875246.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:47.034Z,1478875247.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:47.447Z,1478875247.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:47.844Z,1478875247.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:48.240Z,1478875248.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:48.650Z,1478875248.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:49.033Z,1478875249.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:49.427Z,1478875249.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:49.827Z,1478875249.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:50.283Z,1478875250.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:50.629Z,1478875250.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:51.032Z,1478875251.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:51.441Z,1478875251.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:51.837Z,1478875251.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:52.237Z,1478875252.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:52.662Z,1478875252.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:53.034Z,1478875253.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:53.434Z,1478875253.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:53.845Z,1478875253.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:54.241Z,1478875254.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:54.663Z,1478875254.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:55.037Z,1478875255.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:55.452Z,1478875255.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:55.874Z,1478875255.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:56.269Z,1478875256.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:56.632Z,1478875256.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:57.061Z,1478875257.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:57.433Z,1478875257.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:57.854Z,1478875257.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:58.269Z,1478875258.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:58.631Z,1478875258.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:59.037Z,1478875259.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:59.431Z,1478875259.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:40:59.830Z,1478875259.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:00.238Z,1478875260.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:00.631Z,1478875260.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:01.031Z,1478875261.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:01.430Z,1478875261.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:01.830Z,1478875261.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:02.238Z,1478875262.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:02.637Z,1478875262.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:03.032Z,1478875263.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:03.437Z,1478875263.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:06.880Z,1478875266.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:07.025Z,1478875267.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:07.353Z,1478875267.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:07.754Z,1478875267.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:08.150Z,1478875268.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:08.623Z,1478875268.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:09.005Z,1478875269.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:09.377Z,1478875269.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:09.809Z,1478875269.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:10.172Z,1478875270.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:10.589Z,1478875270.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:10.982Z,1478875270.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:11.368Z,1478875271.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:11.785Z,1478875271.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:12.178Z,1478875272.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:12.601Z,1478875272.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:13.021Z,1478875273.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:13.364Z,1478875273.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:13.770Z,1478875273.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:14.159Z,1478875274.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:14.605Z,1478875274.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:14.995Z,1478875274.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:15.357Z,1478875275.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:15.769Z,1478875275.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:16.172Z,1478875276.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:16.565Z,1478875276.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:16.962Z,1478875276.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:17.367Z,1478875277.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:17.766Z,1478875277.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:18.226Z,1478875278.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:18.571Z,1478875278.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:18.953Z,1478875278.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:19.357Z,1478875279.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:19.757Z,1478875279.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:20.161Z,1478875280.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:20.640Z,1478875280.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:20.965Z,1478875280.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:21.368Z,1478875281.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:21.758Z,1478875281.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:22.169Z,1478875282.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:22.616Z,1478875282.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:22.957Z,1478875282.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:23.353Z,1478875283.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:23.759Z,1478875283.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:24.157Z,1478875284.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:24.569Z,1478875284.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:24.961Z,1478875284.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:25.409Z,1478875285.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:25.817Z,1478875285.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:26.221Z,1478875286.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:26.567Z,1478875286.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:26.978Z,1478875286.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:27.377Z,1478875287.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:27.768Z,1478875287.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:28.165Z,1478875288.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:28.572Z,1478875288.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:28.972Z,1478875288.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:29.411Z,1478875289.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:29.745Z,1478875289.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:30.181Z,1478875290.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:30.565Z,1478875290.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:31.000Z,1478875291.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:31.365Z,1478875291.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:31.764Z,1478875291.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:32.221Z,1478875292.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:32.563Z,1478875292.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:32.967Z,1478875292.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:33.364Z,1478875293.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:33.762Z,1478875293.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:34.164Z,1478875294.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:34.604Z,1478875294.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:34.969Z,1478875294.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:35.361Z,1478875295.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:35.771Z,1478875295.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:36.158Z,1478875296.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:36.584Z,1478875296.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:36.959Z,1478875296.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:37.361Z,1478875297.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:37.762Z,1478875297.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:38.162Z,1478875298.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:38.564Z,1478875298.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:38.957Z,1478875298.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:39.393Z,1478875299.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:39.789Z,1478875299.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:40.157Z,1478875300.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:40.585Z,1478875300.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:40.963Z,1478875300.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:41.381Z,1478875301.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:41.797Z,1478875301.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:42.191Z,1478875302.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:42.582Z,1478875302.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:42.957Z,1478875302.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:43.351Z,1478875303.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:43.761Z,1478875303.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:44.158Z,1478875304.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:44.558Z,1478875304.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:44.988Z,1478875304.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:45.366Z,1478875305.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:45.800Z,1478875305.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:46.200Z,1478875306.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:46.565Z,1478875306.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:46.969Z,1478875306.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:47.390Z,1478875307.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:47.770Z,1478875307.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:48.160Z,1478875308.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:48.577Z,1478875308.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:48.960Z,1478875308.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:49.364Z,1478875309.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:49.766Z,1478875309.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:50.159Z,1478875310.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:50.583Z,1478875310.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:50.977Z,1478875310.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:51.357Z,1478875311.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:51.761Z,1478875311.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:52.162Z,1478875312.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:52.557Z,1478875312.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:52.963Z,1478875312.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:53.360Z,1478875313.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:53.759Z,1478875313.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:54.217Z,1478875314.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:54.566Z,1478875314.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:54.977Z,1478875314.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:55.366Z,1478875315.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:55.785Z,1478875315.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:56.193Z,1478875316.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:56.569Z,1478875316.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:56.946Z,1478875316.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:57.349Z,1478875317.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:57.753Z,1478875317.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:58.162Z,1478875318.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:58.605Z,1478875318.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:58.993Z,1478875318.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:59.355Z,1478875319.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:41:59.757Z,1478875319.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:00.186Z,1478875320.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:00.574Z,1478875320.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:00.974Z,1478875320.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:01.357Z,1478875321.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:01.761Z,1478875321.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:02.167Z,1478875322.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:02.605Z,1478875322.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:02.957Z,1478875322.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:03.372Z,1478875323.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:03.770Z,1478875323.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:07.285Z,1478875327.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:07.414Z,1478875327.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:07.837Z,1478875327.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:08.250Z,1478875328.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:08.596Z,1478875328.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:09.031Z,1478875329.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:09.401Z,1478875329.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:09.832Z,1478875329.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:10.239Z,1478875330.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:10.601Z,1478875330.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:11.003Z,1478875331.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:11.402Z,1478875331.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:11.803Z,1478875331.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:12.213Z,1478875332.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:12.609Z,1478875332.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:13.009Z,1478875333.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:13.403Z,1478875333.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:13.809Z,1478875333.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:14.216Z,1478875334.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:14.645Z,1478875334.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:15.030Z,1478875335.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:15.430Z,1478875335.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:15.824Z,1478875335.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:16.228Z,1478875336.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:16.639Z,1478875336.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:17.032Z,1478875337.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:17.426Z,1478875337.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:17.816Z,1478875337.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:18.221Z,1478875338.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:18.617Z,1478875338.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:19.007Z,1478875339.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:19.418Z,1478875339.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:19.811Z,1478875339.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:20.255Z,1478875340.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:20.638Z,1478875340.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:21.046Z,1478875341.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:21.436Z,1478875341.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:21.842Z,1478875341.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:22.261Z,1478875342.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:22.630Z,1478875342.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:23.076Z,1478875343.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:23.420Z,1478875343.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:23.838Z,1478875343.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:24.282Z,1478875344.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:24.621Z,1478875344.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:24.997Z,1478875344.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:25.416Z,1478875345.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:25.801Z,1478875345.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:26.209Z,1478875346.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:26.621Z,1478875346.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:27.016Z,1478875347.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:27.396Z,1478875347.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:27.805Z,1478875347.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:28.202Z,1478875348.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:28.617Z,1478875348.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:29.014Z,1478875349.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:29.478Z,1478875349.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:29.813Z,1478875349.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:30.218Z,1478875350.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:30.632Z,1478875350.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:31.031Z,1478875351.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:31.433Z,1478875351.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:31.809Z,1478875351.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:32.270Z,1478875352.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:32.660Z,1478875352.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:33.054Z,1478875353.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:33.429Z,1478875353.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:33.830Z,1478875353.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:34.221Z,1478875354.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:34.655Z,1478875354.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:35.022Z,1478875355.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:35.409Z,1478875355.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:35.820Z,1478875355.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:36.266Z,1478875356.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:36.679Z,1478875356.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:37.038Z,1478875357.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:37.442Z,1478875357.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:37.822Z,1478875357.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:38.237Z,1478875358.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:38.646Z,1478875358.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:39.018Z,1478875359.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:39.412Z,1478875359.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:39.820Z,1478875359.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:40.203Z,1478875360.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:40.641Z,1478875360.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:41.010Z,1478875361.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:41.413Z,1478875361.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:41.805Z,1478875361.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:42.206Z,1478875362.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:42.624Z,1478875362.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:43.038Z,1478875363.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:43.500Z,1478875363.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:43.821Z,1478875363.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:44.208Z,1478875364.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:44.602Z,1478875364.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:45.009Z,1478875365.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:45.403Z,1478875365.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:45.808Z,1478875365.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:46.213Z,1478875366.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:46.617Z,1478875366.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:47.006Z,1478875367.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:47.412Z,1478875367.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:47.814Z,1478875367.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:48.210Z,1478875368.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:48.617Z,1478875368.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:49.009Z,1478875369.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:49.417Z,1478875369.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:49.816Z,1478875369.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:50.216Z,1478875370.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:50.608Z,1478875370.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:51.041Z,1478875371.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:51.399Z,1478875371.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:51.835Z,1478875371.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:52.210Z,1478875372.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:52.644Z,1478875372.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:53.045Z,1478875373.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:53.409Z,1478875373.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:53.809Z,1478875373.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:54.204Z,1478875374.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:54.617Z,1478875374.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:55.014Z,1478875375.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:55.405Z,1478875375.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:55.812Z,1478875375.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:56.217Z,1478875376.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:56.606Z,1478875376.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:57.017Z,1478875377.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:57.413Z,1478875377.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:57.805Z,1478875377.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:58.217Z,1478875378.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:58.610Z,1478875378.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:59.005Z,1478875379.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:59.406Z,1478875379.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:42:59.810Z,1478875379.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:00.206Z,1478875380.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:00.613Z,1478875380.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:01.012Z,1478875381.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:01.409Z,1478875381.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:01.808Z,1478875381.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:02.201Z,1478875382.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:02.606Z,1478875382.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:03.009Z,1478875383.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:03.409Z,1478875383.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:03.852Z,1478875383.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:07.453Z,1478875387.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:07.569Z,1478875387.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:07.986Z,1478875387.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:08.385Z,1478875388.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:08.765Z,1478875388.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:09.173Z,1478875389.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:09.555Z,1478875389.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:09.929Z,1478875389.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:10.349Z,1478875390.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:10.753Z,1478875390.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:11.133Z,1478875391.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:11.537Z,1478875391.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:12.010Z,1478875392.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:12.403Z,1478875392.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:12.732Z,1478875392.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:13.134Z,1478875393.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:13.541Z,1478875393.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:13.939Z,1478875393.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:14.395Z,1478875394.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:14.741Z,1478875394.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:15.149Z,1478875395.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:15.541Z,1478875395.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:15.948Z,1478875395.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:16.353Z,1478875396.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:16.751Z,1478875396.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:17.133Z,1478875397.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:17.532Z,1478875397.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:17.968Z,1478875397.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:18.336Z,1478875398.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:18.736Z,1478875398.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:19.139Z,1478875399.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:19.536Z,1478875399.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:19.952Z,1478875399.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:20.328Z,1478875400.328 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T14:43:20.328Z,1478875400.328 [BPC1] Data Fault, FailCount= 1
2016-11-11T14:43:20.328Z,1478875400.328 [BPC1](ERROR): Data Fault
2016-11-11T14:43:20.359Z,1478875400.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:20.378Z,1478875400.378 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T14:43:20.734Z,1478875400.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:21.133Z,1478875401.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:21.527Z,1478875401.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:21.547Z,1478875401.547 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:43:21.547Z,1478875401.547 [BPC1] No Fault, FailCount= 1
2016-11-11T14:43:21.993Z,1478875401.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:22.346Z,1478875402.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:22.757Z,1478875402.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:23.154Z,1478875403.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:23.556Z,1478875403.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:23.986Z,1478875403.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:24.381Z,1478875404.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:24.741Z,1478875404.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:25.145Z,1478875405.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:25.541Z,1478875405.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:25.944Z,1478875405.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:26.400Z,1478875406.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:26.742Z,1478875406.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:27.149Z,1478875407.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:27.554Z,1478875407.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:27.939Z,1478875407.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:28.370Z,1478875408.370 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:28.370Z,1478875408.370 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 178
2016-11-11T14:43:28.370Z,1478875408.370 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:43:28.389Z,1478875408.389 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:28.389Z,1478875408.389 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 178
2016-11-11T14:43:28.389Z,1478875408.389 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:43:28.399Z,1478875408.399 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:28.400Z,1478875408.399 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 178
2016-11-11T14:43:28.400Z,1478875408.399 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:43:28.422Z,1478875408.422 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:43:28.423Z,1478875408.423 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:43:28.423Z,1478875408.423 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:43:28.780Z,1478875408.780 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:43:28.780Z,1478875408.780 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 178
2016-11-11T14:43:28.781Z,1478875408.781 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:43:28.781Z,1478875408.781 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 178
2016-11-11T14:43:28.781Z,1478875408.781 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:43:28.781Z,1478875408.781 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 178
2016-11-11T14:43:29.133Z,1478875409.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:43:29.134Z,1478875409.134 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:43:29.134Z,1478875409.134 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:43:29.139Z,1478875409.139 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:43:29.140Z,1478875409.140 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:43:29.140Z,1478875409.140 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:43:29.140Z,1478875409.141 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:43:29.141Z,1478875409.141 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:43:29.141Z,1478875409.141 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:43:29.541Z,1478875409.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:29.942Z,1478875409.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:30.345Z,1478875410.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:30.740Z,1478875410.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:31.144Z,1478875411.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:31.543Z,1478875411.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:31.949Z,1478875411.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:32.349Z,1478875412.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:32.742Z,1478875412.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:33.141Z,1478875413.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:33.562Z,1478875413.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:33.951Z,1478875413.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:34.373Z,1478875414.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:34.748Z,1478875414.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:35.148Z,1478875415.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:35.558Z,1478875415.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:35.955Z,1478875415.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:36.361Z,1478875416.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:36.747Z,1478875416.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:37.158Z,1478875417.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:37.544Z,1478875417.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:37.993Z,1478875417.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:38.333Z,1478875418.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:38.728Z,1478875418.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:39.133Z,1478875419.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:39.534Z,1478875419.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:39.934Z,1478875419.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:40.377Z,1478875420.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:40.749Z,1478875420.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:41.144Z,1478875421.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:41.544Z,1478875421.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:41.948Z,1478875421.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:42.387Z,1478875422.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:42.745Z,1478875422.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:43.148Z,1478875423.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:43.545Z,1478875423.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:43.955Z,1478875423.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:44.353Z,1478875424.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:44.752Z,1478875424.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:45.128Z,1478875425.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:45.533Z,1478875425.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:45.933Z,1478875425.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:46.337Z,1478875426.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:46.734Z,1478875426.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:47.134Z,1478875427.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:47.534Z,1478875427.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:47.974Z,1478875427.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:48.339Z,1478875428.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:48.754Z,1478875428.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:49.145Z,1478875429.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:49.536Z,1478875429.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:49.981Z,1478875429.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:50.343Z,1478875430.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:50.784Z,1478875430.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:51.052Z,1478875431.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:43:51.162Z,1478875431.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:51.549Z,1478875431.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:51.848Z,1478875431.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:43:51.980Z,1478875431.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:52.333Z,1478875432.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:52.372Z,1478875432.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:43:52.736Z,1478875432.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:53.131Z,1478875433.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:53.168Z,1478875433.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:43:53.541Z,1478875433.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:53.940Z,1478875433.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:53.964Z,1478875433.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:43:54.372Z,1478875434.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:54.684Z,1478875434.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:43:54.743Z,1478875434.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:55.149Z,1478875435.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:55.480Z,1478875435.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:43:55.540Z,1478875435.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:55.947Z,1478875435.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:56.277Z,1478875436.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:43:56.373Z,1478875436.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:56.713Z,1478875436.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:43:56.729Z,1478875436.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:57.133Z,1478875437.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:57.508Z,1478875437.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:43:57.537Z,1478875437.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:57.936Z,1478875437.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:58.216Z,1478875438.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:43:58.340Z,1478875438.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:58.739Z,1478875438.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:59.138Z,1478875439.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:59.545Z,1478875439.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:43:59.944Z,1478875439.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:00.340Z,1478875440.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:00.749Z,1478875440.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:01.145Z,1478875441.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:01.538Z,1478875441.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:01.989Z,1478875441.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:02.349Z,1478875442.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:02.738Z,1478875442.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:03.137Z,1478875443.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:03.570Z,1478875443.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:03.946Z,1478875443.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:07.313Z,1478875447.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:07.436Z,1478875447.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:07.845Z,1478875447.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:08.297Z,1478875448.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:08.615Z,1478875448.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:09.014Z,1478875449.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:09.429Z,1478875449.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:09.815Z,1478875449.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:10.274Z,1478875450.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:10.621Z,1478875450.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:11.028Z,1478875451.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:11.425Z,1478875451.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:11.869Z,1478875451.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:12.225Z,1478875452.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:12.627Z,1478875452.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:13.029Z,1478875453.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:13.424Z,1478875453.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:13.880Z,1478875453.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:14.208Z,1478875454.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:14.612Z,1478875454.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:15.015Z,1478875455.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:15.417Z,1478875455.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:15.874Z,1478875455.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:16.226Z,1478875456.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:16.624Z,1478875456.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:17.026Z,1478875457.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:17.421Z,1478875457.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:17.849Z,1478875457.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:18.226Z,1478875458.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:18.627Z,1478875458.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:19.057Z,1478875459.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:19.421Z,1478875459.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:19.814Z,1478875459.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:20.225Z,1478875460.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:20.645Z,1478875460.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:21.020Z,1478875461.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:21.415Z,1478875461.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:21.850Z,1478875461.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:22.292Z,1478875462.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:22.649Z,1478875462.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:23.049Z,1478875463.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:23.421Z,1478875463.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:23.821Z,1478875463.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:24.275Z,1478875464.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:24.616Z,1478875464.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:25.021Z,1478875465.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:25.425Z,1478875465.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:25.861Z,1478875465.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:26.221Z,1478875466.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:26.618Z,1478875466.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:27.024Z,1478875467.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:27.428Z,1478875467.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:27.868Z,1478875467.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:28.222Z,1478875468.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:28.627Z,1478875468.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:29.025Z,1478875469.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:29.427Z,1478875469.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:29.858Z,1478875469.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:30.228Z,1478875470.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:30.627Z,1478875470.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:31.029Z,1478875471.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:31.425Z,1478875471.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:31.858Z,1478875471.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:32.213Z,1478875472.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:32.612Z,1478875472.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:33.015Z,1478875473.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:33.413Z,1478875473.413 [BPC1](ERROR): Failed to parse message.
2016-11-11T14:44:33.413Z,1478875473.413 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T14:44:33.413Z,1478875473.413 [BPC1] Data Fault, FailCount= 1
2016-11-11T14:44:33.413Z,1478875473.413 [BPC1](ERROR): Data Fault
2016-11-11T14:44:33.465Z,1478875473.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:33.495Z,1478875473.495 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T14:44:33.818Z,1478875473.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:34.223Z,1478875474.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:34.621Z,1478875474.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:34.640Z,1478875474.640 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:44:34.640Z,1478875474.640 [BPC1] No Fault, FailCount= 1
2016-11-11T14:44:35.078Z,1478875475.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:35.417Z,1478875475.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:35.838Z,1478875475.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:36.282Z,1478875476.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:36.613Z,1478875476.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:37.015Z,1478875477.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:37.415Z,1478875477.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:37.820Z,1478875477.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:38.268Z,1478875478.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:38.628Z,1478875478.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:39.025Z,1478875479.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:39.413Z,1478875479.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:39.844Z,1478875479.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:40.215Z,1478875480.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:40.621Z,1478875480.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:41.015Z,1478875481.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:41.425Z,1478875481.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:41.836Z,1478875481.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:42.228Z,1478875482.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:42.632Z,1478875482.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:43.029Z,1478875483.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:43.413Z,1478875483.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:43.827Z,1478875483.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:44.226Z,1478875484.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:44.615Z,1478875484.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:45.019Z,1478875485.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:45.421Z,1478875485.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:45.832Z,1478875485.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:46.230Z,1478875486.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:46.663Z,1478875486.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:47.024Z,1478875487.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:47.432Z,1478875487.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:47.910Z,1478875487.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:48.214Z,1478875488.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:48.625Z,1478875488.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:49.054Z,1478875489.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:49.416Z,1478875489.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:49.858Z,1478875489.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:50.269Z,1478875490.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:50.641Z,1478875490.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:51.031Z,1478875491.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:51.413Z,1478875491.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:51.808Z,1478875491.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:52.268Z,1478875492.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:52.611Z,1478875492.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:53.015Z,1478875493.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:53.415Z,1478875493.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:53.814Z,1478875493.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:54.216Z,1478875494.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:54.618Z,1478875494.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:55.015Z,1478875495.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:55.416Z,1478875495.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:55.817Z,1478875495.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:56.215Z,1478875496.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:56.615Z,1478875496.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:57.017Z,1478875497.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:57.417Z,1478875497.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:57.857Z,1478875497.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:58.224Z,1478875498.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:58.619Z,1478875498.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:59.025Z,1478875499.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:59.419Z,1478875499.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:44:59.821Z,1478875499.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:00.217Z,1478875500.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:00.623Z,1478875500.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:01.049Z,1478875501.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:01.413Z,1478875501.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:01.888Z,1478875501.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:02.221Z,1478875502.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:02.665Z,1478875502.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:03.023Z,1478875503.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:03.040Z,1478875503.040 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T14:45:03.041Z,1478875503.041 [Default:CheckIn:C.Wait] Stopped
2016-11-11T14:45:03.041Z,1478875503.041 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T14:45:03.041Z,1478875503.041 [Default:CheckIn:D] Running Loop=1
2016-11-11T14:45:03.421Z,1478875503.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:03.430Z,1478875503.430 [Default:CheckIn:D] Stopped
2016-11-11T14:45:03.430Z,1478875503.430 [Default:CheckIn:E] Running Loop=1
2016-11-11T14:45:03.857Z,1478875503.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:03.866Z,1478875503.866 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 595.035352 min 
2016-11-11T14:45:03.866Z,1478875503.866 [Default:CheckIn:E] Stopped
2016-11-11T14:45:03.866Z,1478875503.866 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T14:45:03.866Z,1478875503.866 [Default:CheckIn] Stopped
2016-11-11T14:45:03.866Z,1478875503.866 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T14:45:03.866Z,1478875503.866 [Default:CheckIn](INFO): Running loop #58
2016-11-11T14:45:03.867Z,1478875503.866 [Default:CheckIn] Running Loop=58
2016-11-11T14:45:03.867Z,1478875503.867 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T14:45:03.867Z,1478875503.867 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T14:45:04.250Z,1478875504.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:07.512Z,1478875507.513 [NAL9602](INFO): Powering up
2016-11-11T14:45:07.577Z,1478875507.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:07.742Z,1478875507.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:08.110Z,1478875508.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:08.451Z,1478875508.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:08.851Z,1478875508.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:09.265Z,1478875509.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:09.743Z,1478875509.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:10.054Z,1478875510.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:10.450Z,1478875510.450 [PNI_TCM](ERROR): CRC does not match. Expected:0x22686 got:0x24300
2016-11-11T14:45:10.477Z,1478875510.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:10.854Z,1478875510.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:11.267Z,1478875511.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:11.645Z,1478875511.645 [PNI_TCM](ERROR): CRC does not match. Expected:0x51957 got:0x26355
2016-11-11T14:45:11.731Z,1478875511.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:12.042Z,1478875512.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:12.448Z,1478875512.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:12.875Z,1478875512.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:13.237Z,1478875513.237 [PNI_TCM](ERROR): CRC does not match. Expected:0x55255 got:0x4447
2016-11-11T14:45:13.305Z,1478875513.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:13.654Z,1478875513.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:14.078Z,1478875514.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:14.475Z,1478875514.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:14.837Z,1478875514.837 [PNI_TCM](ERROR): CRC does not match. Expected:0x36071 got:0x49579
2016-11-11T14:45:14.893Z,1478875514.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:15.268Z,1478875515.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:15.651Z,1478875515.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:16.062Z,1478875516.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:16.457Z,1478875516.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:16.871Z,1478875516.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:17.253Z,1478875517.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:17.662Z,1478875517.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:18.076Z,1478875518.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:18.409Z,1478875518.409 [NAL9602](INFO): NAL9602 initialized
2016-11-11T14:45:18.442Z,1478875518.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:18.849Z,1478875518.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:19.209Z,1478875519.209 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T14:45:19.209Z,1478875519.209 [NAL9602] Data Fault, FailCount= 5
2016-11-11T14:45:19.209Z,1478875519.209 [NAL9602](ERROR): Data Fault
2016-11-11T14:45:19.257Z,1478875519.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:19.308Z,1478875519.309 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T14:45:19.311Z,1478875519.311 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-11-11T14:45:19.608Z,1478875519.608 [NAL9602](INFO): Powering down
2016-11-11T14:45:19.675Z,1478875519.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:20.066Z,1478875520.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:20.473Z,1478875520.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:20.870Z,1478875520.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:21.290Z,1478875521.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:21.714Z,1478875521.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:22.067Z,1478875522.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:22.505Z,1478875522.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:22.863Z,1478875522.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:23.252Z,1478875523.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:23.706Z,1478875523.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:24.049Z,1478875524.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:24.457Z,1478875524.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:24.846Z,1478875524.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:25.245Z,1478875525.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:25.714Z,1478875525.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:26.053Z,1478875526.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:26.450Z,1478875526.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:26.857Z,1478875526.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:27.254Z,1478875527.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:27.718Z,1478875527.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:28.059Z,1478875528.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:28.459Z,1478875528.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:28.863Z,1478875528.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:29.256Z,1478875529.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:29.673Z,1478875529.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:30.053Z,1478875530.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:30.455Z,1478875530.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:30.852Z,1478875530.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:31.272Z,1478875531.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:31.640Z,1478875531.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:32.073Z,1478875532.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:32.466Z,1478875532.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:32.868Z,1478875532.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:33.277Z,1478875533.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:33.648Z,1478875533.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:34.176Z,1478875534.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:34.482Z,1478875534.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:34.870Z,1478875534.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:35.284Z,1478875535.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:35.740Z,1478875535.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:36.086Z,1478875536.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:36.484Z,1478875536.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:36.854Z,1478875536.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:37.254Z,1478875537.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:37.732Z,1478875537.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:38.057Z,1478875538.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:38.457Z,1478875538.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:38.855Z,1478875538.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:39.255Z,1478875539.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:39.722Z,1478875539.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:40.065Z,1478875540.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:40.445Z,1478875540.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:40.842Z,1478875540.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:41.243Z,1478875541.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:41.730Z,1478875541.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:42.052Z,1478875542.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:42.446Z,1478875542.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:42.845Z,1478875542.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:43.253Z,1478875543.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:43.650Z,1478875543.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:44.069Z,1478875544.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:44.469Z,1478875544.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:44.868Z,1478875544.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:45.269Z,1478875545.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:45.645Z,1478875545.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:46.048Z,1478875546.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:46.450Z,1478875546.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:46.857Z,1478875546.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:47.256Z,1478875547.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:47.658Z,1478875547.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:48.064Z,1478875548.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:48.449Z,1478875548.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:48.909Z,1478875548.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:49.270Z,1478875549.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:49.745Z,1478875549.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:50.042Z,1478875550.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:50.497Z,1478875550.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:50.892Z,1478875550.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:51.255Z,1478875551.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:51.683Z,1478875551.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:52.076Z,1478875552.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:52.459Z,1478875552.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:52.867Z,1478875552.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:53.252Z,1478875553.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:53.714Z,1478875553.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:54.044Z,1478875554.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:54.442Z,1478875554.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:54.849Z,1478875554.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:55.246Z,1478875555.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:55.695Z,1478875555.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:56.053Z,1478875556.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:56.451Z,1478875556.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:56.847Z,1478875556.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:57.253Z,1478875557.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:57.649Z,1478875557.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:58.065Z,1478875558.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:58.445Z,1478875558.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:58.848Z,1478875558.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:59.247Z,1478875559.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:45:59.656Z,1478875559.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:00.052Z,1478875560.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:00.447Z,1478875560.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:00.850Z,1478875560.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:00.872Z,1478875560.872 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T14:46:01.256Z,1478875561.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:01.650Z,1478875561.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:02.075Z,1478875562.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:02.463Z,1478875562.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:02.901Z,1478875562.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:03.272Z,1478875563.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:03.737Z,1478875563.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:04.047Z,1478875564.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:04.486Z,1478875564.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:07.993Z,1478875567.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:08.140Z,1478875568.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:08.473Z,1478875568.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:08.876Z,1478875568.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:09.294Z,1478875569.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:09.712Z,1478875569.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:10.079Z,1478875570.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:10.472Z,1478875570.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:10.905Z,1478875570.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:11.263Z,1478875571.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:11.667Z,1478875571.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:12.079Z,1478875572.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:12.474Z,1478875572.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:12.873Z,1478875572.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:13.273Z,1478875573.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:13.679Z,1478875573.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:14.127Z,1478875574.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:14.476Z,1478875574.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:14.877Z,1478875574.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:15.268Z,1478875575.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:15.674Z,1478875575.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:16.154Z,1478875576.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:16.465Z,1478875576.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:16.873Z,1478875576.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:17.303Z,1478875577.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:17.705Z,1478875577.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:18.070Z,1478875578.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:18.468Z,1478875578.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:18.877Z,1478875578.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:19.277Z,1478875579.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:19.698Z,1478875579.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:20.117Z,1478875580.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:20.501Z,1478875580.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:20.905Z,1478875580.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:21.289Z,1478875581.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:21.689Z,1478875581.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:22.090Z,1478875582.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:22.489Z,1478875582.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:22.858Z,1478875582.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:23.273Z,1478875583.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:23.699Z,1478875583.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:24.098Z,1478875584.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:24.477Z,1478875584.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:24.877Z,1478875584.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:25.296Z,1478875585.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:25.724Z,1478875585.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:26.075Z,1478875586.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:26.463Z,1478875586.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:26.871Z,1478875586.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:27.265Z,1478875587.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:27.669Z,1478875587.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:28.138Z,1478875588.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:28.468Z,1478875588.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:28.881Z,1478875588.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:29.267Z,1478875589.267 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:29.267Z,1478875589.267 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 179
2016-11-11T14:46:29.294Z,1478875589.294 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:46:29.302Z,1478875589.302 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:29.302Z,1478875589.302 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 179
2016-11-11T14:46:29.302Z,1478875589.302 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:46:29.304Z,1478875589.304 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:29.304Z,1478875589.304 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 179
2016-11-11T14:46:29.304Z,1478875589.304 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:46:29.319Z,1478875589.319 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:46:29.335Z,1478875589.335 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:46:29.336Z,1478875589.336 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:46:29.709Z,1478875589.709 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:46:29.710Z,1478875589.710 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 179
2016-11-11T14:46:29.710Z,1478875589.710 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:46:29.710Z,1478875589.710 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 179
2016-11-11T14:46:29.715Z,1478875589.715 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:46:29.715Z,1478875589.715 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 179
2016-11-11T14:46:30.118Z,1478875590.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:46:30.119Z,1478875590.119 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:46:30.119Z,1478875590.119 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:46:30.148Z,1478875590.148 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:46:30.148Z,1478875590.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:46:30.149Z,1478875590.149 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:46:30.149Z,1478875590.149 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:46:30.149Z,1478875590.149 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:46:30.150Z,1478875590.150 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:46:30.464Z,1478875590.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:30.868Z,1478875590.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:31.264Z,1478875591.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:31.665Z,1478875591.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:32.069Z,1478875592.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:32.474Z,1478875592.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:32.868Z,1478875592.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:33.268Z,1478875593.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:33.666Z,1478875593.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:34.072Z,1478875594.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:34.529Z,1478875594.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:34.872Z,1478875594.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:35.280Z,1478875595.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:35.697Z,1478875595.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:36.077Z,1478875596.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:36.493Z,1478875596.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:36.920Z,1478875596.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:37.269Z,1478875597.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:37.673Z,1478875597.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:38.067Z,1478875598.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:38.465Z,1478875598.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:38.877Z,1478875598.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:39.265Z,1478875599.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:39.720Z,1478875599.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:40.091Z,1478875600.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:40.456Z,1478875600.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:40.902Z,1478875600.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:41.272Z,1478875601.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:41.672Z,1478875601.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:42.121Z,1478875602.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:42.494Z,1478875602.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:42.869Z,1478875602.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:43.263Z,1478875603.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:43.672Z,1478875603.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:44.102Z,1478875604.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:44.471Z,1478875604.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:44.877Z,1478875604.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:45.270Z,1478875605.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:45.677Z,1478875605.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:46.079Z,1478875606.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:46.478Z,1478875606.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:46.877Z,1478875606.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:47.279Z,1478875607.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:47.681Z,1478875607.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:48.077Z,1478875608.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:48.479Z,1478875608.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:48.913Z,1478875608.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:49.286Z,1478875609.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:49.679Z,1478875609.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:50.093Z,1478875610.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:50.462Z,1478875610.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:50.889Z,1478875610.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:51.305Z,1478875611.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:51.670Z,1478875611.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:52.065Z,1478875612.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:52.465Z,1478875612.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:52.864Z,1478875612.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:53.270Z,1478875613.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:53.754Z,1478875613.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:54.089Z,1478875614.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:54.477Z,1478875614.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:54.876Z,1478875614.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:55.283Z,1478875615.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:55.693Z,1478875615.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:56.101Z,1478875616.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:56.468Z,1478875616.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:56.871Z,1478875616.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:57.289Z,1478875617.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:57.697Z,1478875617.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:58.085Z,1478875618.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:58.473Z,1478875618.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:58.889Z,1478875618.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:59.314Z,1478875619.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:46:59.685Z,1478875619.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:00.066Z,1478875620.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:00.471Z,1478875620.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:00.874Z,1478875620.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:01.270Z,1478875621.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:01.677Z,1478875621.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:02.074Z,1478875622.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:02.475Z,1478875622.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:02.867Z,1478875622.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:03.313Z,1478875623.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:03.721Z,1478875623.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:04.081Z,1478875624.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:04.497Z,1478875624.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:07.883Z,1478875627.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:08.049Z,1478875628.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:08.378Z,1478875628.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:08.761Z,1478875628.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:09.158Z,1478875629.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:09.561Z,1478875629.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:10.029Z,1478875630.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:10.371Z,1478875630.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:10.774Z,1478875630.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:11.175Z,1478875631.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:11.569Z,1478875631.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:12.004Z,1478875632.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:12.353Z,1478875632.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:12.758Z,1478875632.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:13.153Z,1478875633.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:13.605Z,1478875633.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:13.965Z,1478875633.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:14.372Z,1478875634.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:14.775Z,1478875634.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:15.173Z,1478875635.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:15.585Z,1478875635.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:15.953Z,1478875635.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:16.377Z,1478875636.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:16.748Z,1478875636.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:17.206Z,1478875637.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:17.604Z,1478875637.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:17.958Z,1478875637.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:18.373Z,1478875638.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:18.780Z,1478875638.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:19.165Z,1478875639.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:19.242Z,1478875639.242 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T14:47:19.243Z,1478875639.243 [NAL9602] No Fault, FailCount= 5
2016-11-11T14:47:19.518Z,1478875639.518 [NAL9602](INFO): Powering up NAL9602
2016-11-11T14:47:19.594Z,1478875639.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:19.993Z,1478875639.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:20.429Z,1478875640.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:20.775Z,1478875640.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:21.210Z,1478875641.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:21.641Z,1478875641.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:21.984Z,1478875641.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:22.398Z,1478875642.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:22.794Z,1478875642.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:23.170Z,1478875643.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:23.569Z,1478875643.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:24.009Z,1478875644.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:24.385Z,1478875644.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:24.755Z,1478875644.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:25.169Z,1478875645.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:25.566Z,1478875645.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:26.046Z,1478875646.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:26.361Z,1478875646.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:26.780Z,1478875646.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:27.166Z,1478875647.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:27.582Z,1478875647.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:27.977Z,1478875647.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:28.353Z,1478875648.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:28.757Z,1478875648.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:29.157Z,1478875649.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:29.607Z,1478875649.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:29.967Z,1478875649.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:30.317Z,1478875650.317 [NAL9602](INFO): NAL9602 initialized
2016-11-11T14:47:30.363Z,1478875650.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:30.821Z,1478875650.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:31.177Z,1478875651.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:31.575Z,1478875651.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:31.966Z,1478875651.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:32.362Z,1478875652.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:32.762Z,1478875652.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:33.159Z,1478875653.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:33.593Z,1478875653.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:33.973Z,1478875653.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:34.385Z,1478875654.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:34.753Z,1478875654.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:35.149Z,1478875655.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:35.589Z,1478875655.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:35.980Z,1478875655.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:36.385Z,1478875656.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:36.822Z,1478875656.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:37.153Z,1478875657.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:37.557Z,1478875657.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:37.960Z,1478875657.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:38.367Z,1478875658.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:38.759Z,1478875658.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:39.167Z,1478875659.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:39.583Z,1478875659.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:39.958Z,1478875659.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:40.403Z,1478875660.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:40.752Z,1478875660.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:41.153Z,1478875661.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:41.548Z,1478875661.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:41.953Z,1478875661.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:42.349Z,1478875662.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:42.757Z,1478875662.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:43.157Z,1478875663.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:43.563Z,1478875663.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:43.964Z,1478875663.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:44.367Z,1478875664.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:44.759Z,1478875664.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:45.149Z,1478875665.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:45.557Z,1478875665.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:45.957Z,1478875665.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:46.357Z,1478875666.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:46.757Z,1478875666.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:47.153Z,1478875667.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:47.577Z,1478875667.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:47.953Z,1478875667.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:48.350Z,1478875668.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:48.793Z,1478875668.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:49.163Z,1478875669.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:49.564Z,1478875669.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:49.985Z,1478875669.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:50.352Z,1478875670.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:50.821Z,1478875670.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:51.185Z,1478875671.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:51.562Z,1478875671.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:51.998Z,1478875671.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:52.355Z,1478875672.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:52.834Z,1478875672.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:53.162Z,1478875673.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:53.593Z,1478875673.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:53.978Z,1478875673.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:54.350Z,1478875674.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:54.778Z,1478875674.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:55.177Z,1478875675.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:55.572Z,1478875675.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:55.970Z,1478875675.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:56.370Z,1478875676.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:56.778Z,1478875676.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:57.182Z,1478875677.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:57.562Z,1478875677.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:57.978Z,1478875677.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:58.378Z,1478875678.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:58.791Z,1478875678.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:59.169Z,1478875679.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:47:59.578Z,1478875679.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:00.005Z,1478875680.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:00.390Z,1478875680.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:00.762Z,1478875680.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:01.177Z,1478875681.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:01.669Z,1478875681.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:01.961Z,1478875681.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:02.393Z,1478875682.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:02.786Z,1478875682.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:03.225Z,1478875683.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:03.646Z,1478875683.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:03.992Z,1478875683.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:04.389Z,1478875684.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:04.806Z,1478875684.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:12.016Z,1478875692.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:12.213Z,1478875692.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:12.585Z,1478875692.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:12.984Z,1478875692.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:13.392Z,1478875693.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:13.776Z,1478875693.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:14.162Z,1478875694.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:14.564Z,1478875694.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:14.955Z,1478875694.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:15.353Z,1478875695.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:15.763Z,1478875695.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:16.165Z,1478875696.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:16.563Z,1478875696.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:16.963Z,1478875696.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:17.360Z,1478875697.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:17.757Z,1478875697.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:18.161Z,1478875698.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:18.549Z,1478875698.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:18.961Z,1478875698.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:19.357Z,1478875699.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:19.761Z,1478875699.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:20.166Z,1478875700.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.405300 seconds old.
2016-11-11T14:48:20.171Z,1478875700.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:20.176Z,1478875700.176 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.413500 seconds old.
2016-11-11T14:48:20.178Z,1478875700.178 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.413800 seconds old.
2016-11-11T14:48:20.181Z,1478875700.181 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.414500 seconds old.
2016-11-11T14:48:20.182Z,1478875700.182 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.414800 seconds old.
2016-11-11T14:48:20.549Z,1478875700.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.788800 seconds old.
2016-11-11T14:48:20.550Z,1478875700.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:20.568Z,1478875700.568 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.805300 seconds old.
2016-11-11T14:48:20.570Z,1478875700.570 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.805600 seconds old.
2016-11-11T14:48:20.577Z,1478875700.577 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.810300 seconds old.
2016-11-11T14:48:20.578Z,1478875700.578 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.810700 seconds old.
2016-11-11T14:48:20.974Z,1478875700.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.214100 seconds old.
2016-11-11T14:48:20.976Z,1478875700.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:20.977Z,1478875700.977 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.214600 seconds old.
2016-11-11T14:48:20.979Z,1478875700.979 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.214700 seconds old.
2016-11-11T14:48:20.982Z,1478875700.981 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.215200 seconds old.
2016-11-11T14:48:20.983Z,1478875700.983 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.215600 seconds old.
2016-11-11T14:48:21.364Z,1478875701.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.603500 seconds old.
2016-11-11T14:48:21.365Z,1478875701.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:21.366Z,1478875701.366 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.603900 seconds old.
2016-11-11T14:48:21.369Z,1478875701.369 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.604300 seconds old.
2016-11-11T14:48:21.371Z,1478875701.371 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.604800 seconds old.
2016-11-11T14:48:21.373Z,1478875701.373 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.605400 seconds old.
2016-11-11T14:48:21.746Z,1478875701.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:22.106Z,1478875702.106 [NAL9602](INFO): SBD MO Status=2, MOMSN=348, MT Status=2, MTMSN=0
2016-11-11T14:48:22.106Z,1478875702.106 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T14:48:22.157Z,1478875702.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:22.551Z,1478875702.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:22.980Z,1478875702.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:23.347Z,1478875703.347 [PNI_TCM](ERROR): CRC does not match. Expected:0x2232 got:0x1857
2016-11-11T14:48:23.415Z,1478875703.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:23.781Z,1478875703.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:24.150Z,1478875704.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:24.585Z,1478875704.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:24.948Z,1478875704.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:25.386Z,1478875705.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:25.753Z,1478875705.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:26.203Z,1478875706.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:26.589Z,1478875706.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:26.969Z,1478875706.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:27.435Z,1478875707.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:27.746Z,1478875707.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:28.174Z,1478875708.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:28.569Z,1478875708.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:28.947Z,1478875708.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:29.384Z,1478875709.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:29.757Z,1478875709.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:30.147Z,1478875710.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:30.553Z,1478875710.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:30.951Z,1478875710.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:31.354Z,1478875711.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:31.760Z,1478875711.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:32.163Z,1478875712.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:32.558Z,1478875712.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:32.960Z,1478875712.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:33.353Z,1478875713.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:33.757Z,1478875713.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:34.170Z,1478875714.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:34.555Z,1478875714.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:34.949Z,1478875714.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:35.349Z,1478875715.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:35.757Z,1478875715.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:36.146Z,1478875716.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:36.559Z,1478875716.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:36.974Z,1478875716.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:37.454Z,1478875717.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:37.765Z,1478875717.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:38.161Z,1478875718.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:38.577Z,1478875718.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:38.957Z,1478875718.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:39.407Z,1478875719.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:39.781Z,1478875719.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:40.147Z,1478875720.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:40.585Z,1478875720.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:40.985Z,1478875720.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:41.418Z,1478875721.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:41.758Z,1478875721.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:42.157Z,1478875722.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:42.563Z,1478875722.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:42.964Z,1478875722.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:43.404Z,1478875723.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:43.745Z,1478875723.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:44.146Z,1478875724.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:44.543Z,1478875724.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:44.956Z,1478875724.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:45.347Z,1478875725.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:45.743Z,1478875725.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:46.155Z,1478875726.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:46.562Z,1478875726.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:46.954Z,1478875726.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:47.366Z,1478875727.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:47.761Z,1478875727.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:48.173Z,1478875728.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:48.565Z,1478875728.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:48.990Z,1478875728.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:49.340Z,1478875729.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:49.742Z,1478875729.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:50.157Z,1478875730.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:50.544Z,1478875730.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:50.961Z,1478875730.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:51.465Z,1478875731.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:51.749Z,1478875731.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:52.164Z,1478875732.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:52.562Z,1478875732.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:52.981Z,1478875732.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:53.421Z,1478875733.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:53.785Z,1478875733.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:54.144Z,1478875734.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:54.578Z,1478875734.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:54.974Z,1478875734.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:55.388Z,1478875735.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:55.749Z,1478875735.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:56.147Z,1478875736.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:56.544Z,1478875736.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:56.944Z,1478875736.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:57.428Z,1478875737.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:57.754Z,1478875737.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:58.158Z,1478875738.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:58.566Z,1478875738.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:58.952Z,1478875738.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:59.352Z,1478875739.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:48:59.765Z,1478875739.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:00.139Z,1478875740.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:00.542Z,1478875740.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:00.944Z,1478875740.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:01.342Z,1478875741.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:01.753Z,1478875741.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:02.153Z,1478875742.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:02.558Z,1478875742.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:02.969Z,1478875742.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:03.363Z,1478875743.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:03.805Z,1478875743.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:04.149Z,1478875744.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:04.549Z,1478875744.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:04.945Z,1478875744.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:08.553Z,1478875748.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:08.687Z,1478875748.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:09.070Z,1478875749.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:09.511Z,1478875749.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:09.865Z,1478875749.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:10.278Z,1478875750.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:10.678Z,1478875750.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:11.045Z,1478875751.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:11.470Z,1478875751.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:11.857Z,1478875751.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:12.258Z,1478875752.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:12.653Z,1478875752.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:13.053Z,1478875753.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:13.510Z,1478875753.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:13.866Z,1478875753.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:14.263Z,1478875754.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:14.671Z,1478875754.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:15.057Z,1478875755.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:15.458Z,1478875755.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:15.874Z,1478875755.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:16.260Z,1478875756.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:16.661Z,1478875756.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:17.060Z,1478875757.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:17.459Z,1478875757.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:17.874Z,1478875757.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:18.245Z,1478875758.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:18.674Z,1478875758.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:19.051Z,1478875759.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:19.455Z,1478875759.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:19.855Z,1478875759.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:20.253Z,1478875760.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:20.647Z,1478875760.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:21.047Z,1478875761.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:21.489Z,1478875761.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:21.855Z,1478875761.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:22.253Z,1478875762.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:22.719Z,1478875762.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:23.056Z,1478875763.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:23.457Z,1478875763.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:23.901Z,1478875763.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:24.262Z,1478875764.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:24.700Z,1478875764.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:25.117Z,1478875765.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:25.462Z,1478875765.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:25.868Z,1478875765.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:26.241Z,1478875766.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:26.646Z,1478875766.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:27.047Z,1478875767.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:27.461Z,1478875767.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:27.856Z,1478875767.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:28.253Z,1478875768.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:28.665Z,1478875768.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:29.062Z,1478875769.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:29.458Z,1478875769.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:29.863Z,1478875769.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:30.262Z,1478875770.262 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:30.262Z,1478875770.262 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 180
2016-11-11T14:49:30.262Z,1478875770.262 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:49:30.269Z,1478875770.269 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:30.269Z,1478875770.269 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 180
2016-11-11T14:49:30.269Z,1478875770.269 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:49:30.271Z,1478875770.271 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:30.271Z,1478875770.271 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 180
2016-11-11T14:49:30.271Z,1478875770.271 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:49:30.285Z,1478875770.286 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:49:30.286Z,1478875770.286 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:49:30.286Z,1478875770.286 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:49:30.694Z,1478875770.694 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:49:30.694Z,1478875770.694 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 180
2016-11-11T14:49:30.695Z,1478875770.695 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:49:30.695Z,1478875770.695 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 180
2016-11-11T14:49:30.696Z,1478875770.696 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:49:30.696Z,1478875770.696 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 180
2016-11-11T14:49:31.052Z,1478875771.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:49:31.052Z,1478875771.053 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:49:31.053Z,1478875771.053 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:49:31.062Z,1478875771.062 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:49:31.062Z,1478875771.062 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:49:31.062Z,1478875771.062 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:49:31.067Z,1478875771.067 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:49:31.068Z,1478875771.068 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:49:31.068Z,1478875771.068 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:49:31.449Z,1478875771.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:31.853Z,1478875771.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:32.265Z,1478875772.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:32.657Z,1478875772.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:33.048Z,1478875773.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:33.457Z,1478875773.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:33.857Z,1478875773.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:34.269Z,1478875774.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:34.668Z,1478875774.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:35.071Z,1478875775.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:35.462Z,1478875775.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:35.900Z,1478875775.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:36.257Z,1478875776.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:36.689Z,1478875776.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:37.061Z,1478875777.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:37.457Z,1478875777.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:37.891Z,1478875777.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:38.261Z,1478875778.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:38.673Z,1478875778.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:39.070Z,1478875779.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:39.477Z,1478875779.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:39.861Z,1478875779.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:40.266Z,1478875780.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:40.677Z,1478875780.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:41.061Z,1478875781.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:41.479Z,1478875781.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:41.852Z,1478875781.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:42.250Z,1478875782.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:42.651Z,1478875782.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:43.060Z,1478875783.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:43.456Z,1478875783.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:43.856Z,1478875783.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:44.259Z,1478875784.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:44.671Z,1478875784.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:45.068Z,1478875785.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:45.465Z,1478875785.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:45.862Z,1478875785.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:46.260Z,1478875786.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:46.661Z,1478875786.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:47.060Z,1478875787.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:47.457Z,1478875787.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:47.869Z,1478875787.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:48.260Z,1478875788.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:48.660Z,1478875788.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:49.061Z,1478875789.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:49.485Z,1478875789.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:49.867Z,1478875789.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:50.265Z,1478875790.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:50.672Z,1478875790.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:51.095Z,1478875791.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:51.445Z,1478875791.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:51.849Z,1478875791.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:52.297Z,1478875792.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:52.653Z,1478875792.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:53.071Z,1478875793.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:53.489Z,1478875793.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:53.853Z,1478875793.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:54.253Z,1478875794.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:54.665Z,1478875794.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:55.055Z,1478875795.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:55.453Z,1478875795.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:55.861Z,1478875795.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:56.260Z,1478875796.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:56.650Z,1478875796.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:57.059Z,1478875797.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:57.465Z,1478875797.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:57.853Z,1478875797.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:58.266Z,1478875798.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:58.673Z,1478875798.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:59.105Z,1478875799.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:59.442Z,1478875799.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:49:59.840Z,1478875799.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:00.249Z,1478875800.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:00.656Z,1478875800.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:01.051Z,1478875801.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:01.455Z,1478875801.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:01.852Z,1478875801.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:02.260Z,1478875802.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:02.658Z,1478875802.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:03.051Z,1478875803.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:03.461Z,1478875803.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:03.850Z,1478875803.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:04.249Z,1478875804.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:04.258Z,1478875804.258 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T14:45:03.9Z
2016-11-11T14:50:04.258Z,1478875804.258 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T14:50:04.258Z,1478875804.258 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T14:50:04.651Z,1478875804.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:05.578Z,1478875805.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:05.730Z,1478875805.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:09.436Z,1478875809.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:09.502Z,1478875809.502 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20161111T044527/Courier0232.lzma
2016-11-11T14:50:09.587Z,1478875809.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:09.981Z,1478875809.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:10.297Z,1478875810.297 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0232.lzma.bak
2016-11-11T14:50:10.297Z,1478875810.297 [DataOverHttps](INFO): SBD MOMSN=4555500
2016-11-11T14:50:10.372Z,1478875810.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:11.702Z,1478875811.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:11.861Z,1478875811.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:15.496Z,1478875815.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:15.637Z,1478875815.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:15.984Z,1478875815.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:16.393Z,1478875816.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:16.781Z,1478875816.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:17.258Z,1478875817.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:20.543Z,1478875820.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:20.612Z,1478875820.612 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20161111T044527/Express0233.lzma
2016-11-11T14:50:20.697Z,1478875820.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:21.058Z,1478875821.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:21.401Z,1478875821.401 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0233.lzma.bak
2016-11-11T14:50:21.402Z,1478875821.402 [DataOverHttps](INFO): SBD MOMSN=4555503
2016-11-11T14:50:21.466Z,1478875821.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:22.710Z,1478875822.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:22.719Z,1478875822.719 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T14:50:22.719Z,1478875822.719 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T14:50:22.719Z,1478875822.719 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T14:50:22.850Z,1478875822.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:26.533Z,1478875826.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:26.689Z,1478875826.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:27.067Z,1478875827.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:27.481Z,1478875827.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:27.877Z,1478875827.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:28.244Z,1478875828.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:28.661Z,1478875828.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:29.048Z,1478875829.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:29.477Z,1478875829.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:29.873Z,1478875829.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:30.233Z,1478875830.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:30.637Z,1478875830.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:31.034Z,1478875831.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:31.443Z,1478875831.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:31.843Z,1478875831.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:32.249Z,1478875832.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:32.655Z,1478875832.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:33.038Z,1478875833.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:33.449Z,1478875833.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:33.844Z,1478875833.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:34.245Z,1478875834.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:34.645Z,1478875834.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:35.044Z,1478875835.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:35.445Z,1478875835.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:35.845Z,1478875835.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:36.241Z,1478875836.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:36.651Z,1478875836.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:37.053Z,1478875837.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:37.456Z,1478875837.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:37.851Z,1478875837.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:38.229Z,1478875838.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:38.641Z,1478875838.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:39.041Z,1478875839.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:39.441Z,1478875839.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:39.841Z,1478875839.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:40.239Z,1478875840.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:40.641Z,1478875840.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:41.049Z,1478875841.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:41.449Z,1478875841.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:41.919Z,1478875841.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:42.254Z,1478875842.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:42.665Z,1478875842.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:43.085Z,1478875843.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:43.437Z,1478875843.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:43.874Z,1478875843.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:44.281Z,1478875844.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:44.635Z,1478875844.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:45.040Z,1478875845.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:45.446Z,1478875845.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:45.837Z,1478875845.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:46.243Z,1478875846.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:46.648Z,1478875846.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:47.050Z,1478875847.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:47.458Z,1478875847.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:47.865Z,1478875847.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:48.255Z,1478875848.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:48.657Z,1478875848.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:49.037Z,1478875849.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:49.470Z,1478875849.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:49.836Z,1478875849.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:50.247Z,1478875850.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:50.649Z,1478875850.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:51.038Z,1478875851.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:51.441Z,1478875851.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:51.836Z,1478875851.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:52.260Z,1478875852.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:52.654Z,1478875852.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:53.060Z,1478875853.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:53.467Z,1478875853.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:53.841Z,1478875853.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:54.241Z,1478875854.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:54.647Z,1478875854.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:55.049Z,1478875855.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:55.445Z,1478875855.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:55.848Z,1478875855.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:56.287Z,1478875856.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:56.642Z,1478875856.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:57.040Z,1478875857.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:57.490Z,1478875857.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:57.846Z,1478875857.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:58.289Z,1478875858.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:58.687Z,1478875858.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:59.038Z,1478875859.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:59.441Z,1478875859.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:50:59.841Z,1478875859.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:00.267Z,1478875860.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:00.648Z,1478875860.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:01.045Z,1478875861.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:01.453Z,1478875861.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:01.833Z,1478875861.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:02.233Z,1478875862.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:02.650Z,1478875862.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:03.046Z,1478875863.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:03.455Z,1478875863.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:03.851Z,1478875863.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:04.247Z,1478875864.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:04.650Z,1478875864.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:05.047Z,1478875865.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:05.491Z,1478875865.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:05.841Z,1478875865.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:06.242Z,1478875866.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:06.658Z,1478875866.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:07.058Z,1478875867.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:07.449Z,1478875867.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:07.865Z,1478875867.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:08.261Z,1478875868.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:08.658Z,1478875868.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:09.095Z,1478875869.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:09.462Z,1478875869.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:09.837Z,1478875869.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:10.274Z,1478875870.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:10.663Z,1478875870.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:11.117Z,1478875871.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:11.456Z,1478875871.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:11.840Z,1478875871.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:12.273Z,1478875872.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:12.644Z,1478875872.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:13.116Z,1478875873.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:13.473Z,1478875873.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:13.870Z,1478875873.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:14.250Z,1478875874.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:14.640Z,1478875874.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:15.046Z,1478875875.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:15.455Z,1478875875.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:15.851Z,1478875875.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:16.249Z,1478875876.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:16.650Z,1478875876.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:17.051Z,1478875877.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:17.451Z,1478875877.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:17.837Z,1478875877.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:18.259Z,1478875878.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:18.659Z,1478875878.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:19.062Z,1478875879.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:19.445Z,1478875879.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:19.837Z,1478875879.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:20.269Z,1478875880.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:20.643Z,1478875880.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:21.038Z,1478875881.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:21.446Z,1478875881.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:21.853Z,1478875881.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:22.249Z,1478875882.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:22.648Z,1478875882.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:23.046Z,1478875883.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:23.457Z,1478875883.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:26.866Z,1478875886.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:27.005Z,1478875887.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:27.426Z,1478875887.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:27.781Z,1478875887.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:28.193Z,1478875888.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:28.594Z,1478875888.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:28.957Z,1478875888.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:29.361Z,1478875889.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:29.765Z,1478875889.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:30.161Z,1478875890.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:30.567Z,1478875890.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:30.961Z,1478875890.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:31.385Z,1478875891.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:31.774Z,1478875891.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:32.185Z,1478875892.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:32.586Z,1478875892.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:32.973Z,1478875892.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:33.369Z,1478875893.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:33.761Z,1478875893.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:34.165Z,1478875894.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:34.559Z,1478875894.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:34.965Z,1478875894.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:35.364Z,1478875895.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:35.768Z,1478875895.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:36.163Z,1478875896.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:36.584Z,1478875896.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:36.974Z,1478875896.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:37.395Z,1478875897.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:37.777Z,1478875897.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:38.177Z,1478875898.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:38.553Z,1478875898.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:38.961Z,1478875898.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:39.373Z,1478875899.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:39.764Z,1478875899.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:40.163Z,1478875900.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:40.581Z,1478875900.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:40.997Z,1478875900.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:41.386Z,1478875901.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:41.788Z,1478875901.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:42.198Z,1478875902.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:42.558Z,1478875902.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:42.990Z,1478875902.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:43.399Z,1478875903.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:43.765Z,1478875903.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:44.165Z,1478875904.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:44.567Z,1478875904.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:44.978Z,1478875904.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:45.376Z,1478875905.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:45.784Z,1478875905.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:46.158Z,1478875906.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:46.561Z,1478875906.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:46.962Z,1478875906.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:47.359Z,1478875907.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:47.758Z,1478875907.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:48.159Z,1478875908.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:48.565Z,1478875908.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:48.968Z,1478875908.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:49.369Z,1478875909.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:49.761Z,1478875909.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:50.174Z,1478875910.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:50.570Z,1478875910.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:50.962Z,1478875910.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:51.371Z,1478875911.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:51.758Z,1478875911.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:52.165Z,1478875912.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:52.565Z,1478875912.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:52.973Z,1478875912.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:53.382Z,1478875913.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:53.798Z,1478875913.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:54.161Z,1478875914.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:54.584Z,1478875914.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:54.962Z,1478875914.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:55.409Z,1478875915.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:55.794Z,1478875915.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:56.175Z,1478875916.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:56.611Z,1478875916.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:56.972Z,1478875916.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:57.405Z,1478875917.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:57.815Z,1478875917.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:58.175Z,1478875918.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:58.557Z,1478875918.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:58.957Z,1478875918.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:59.370Z,1478875919.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:51:59.763Z,1478875919.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:00.163Z,1478875920.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:00.568Z,1478875920.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:00.966Z,1478875920.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:01.372Z,1478875921.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:01.789Z,1478875921.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:02.177Z,1478875922.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:02.583Z,1478875922.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:02.974Z,1478875922.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:03.370Z,1478875923.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:03.778Z,1478875923.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:04.177Z,1478875924.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:04.585Z,1478875924.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:04.958Z,1478875924.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:05.361Z,1478875925.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:05.784Z,1478875925.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:06.170Z,1478875926.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:06.591Z,1478875926.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:06.971Z,1478875926.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:07.382Z,1478875927.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:07.787Z,1478875927.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:08.182Z,1478875928.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:08.593Z,1478875928.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:08.963Z,1478875928.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:09.368Z,1478875929.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:09.817Z,1478875929.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:10.189Z,1478875930.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:10.573Z,1478875930.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:10.973Z,1478875930.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:11.413Z,1478875931.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:11.768Z,1478875931.768 [PNI_TCM](ERROR): CRC does not match. Expected:0x63495 got:0x56004
2016-11-11T14:52:11.786Z,1478875931.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:12.202Z,1478875932.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:12.605Z,1478875932.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:12.978Z,1478875932.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:13.357Z,1478875933.357 [PNI_TCM](ERROR): CRC does not match. Expected:0x8084 got:0x20771
2016-11-11T14:52:13.425Z,1478875933.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:13.788Z,1478875933.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:14.177Z,1478875934.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:14.605Z,1478875934.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:14.985Z,1478875934.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:15.394Z,1478875935.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:15.799Z,1478875935.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:16.181Z,1478875936.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:16.557Z,1478875936.557 [PNI_TCM](ERROR): CRC does not match. Expected:0x7534 got:0x49579
2016-11-11T14:52:16.581Z,1478875936.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:16.981Z,1478875936.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:17.389Z,1478875937.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:17.790Z,1478875937.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:18.184Z,1478875938.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:18.585Z,1478875938.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:18.961Z,1478875938.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:19.385Z,1478875939.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:19.746Z,1478875939.746 [PNI_TCM](ERROR): CRC does not match. Expected:0x27996 got:0x48991
2016-11-11T14:52:19.773Z,1478875939.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:20.172Z,1478875940.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:20.581Z,1478875940.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:21.033Z,1478875941.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:21.374Z,1478875941.374 [PNI_TCM](ERROR): CRC does not match. Expected:0x54035 got:0x49579
2016-11-11T14:52:21.406Z,1478875941.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:21.792Z,1478875941.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:22.178Z,1478875942.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:22.578Z,1478875942.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:23.031Z,1478875943.031 [PNI_TCM](ERROR): CRC does not match. Expected:0x45721 got:0x7361
2016-11-11T14:52:23.086Z,1478875943.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:23.410Z,1478875943.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:23.789Z,1478875943.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:24.181Z,1478875944.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:24.590Z,1478875944.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:25.050Z,1478875945.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:28.860Z,1478875948.860 [BPC1](ERROR): Failed to receive battery data
2016-11-11T14:52:28.860Z,1478875948.861 [BPC1] Communications Fault, FailCount= 1
2016-11-11T14:52:28.861Z,1478875948.861 [BPC1](ERROR): Communications Fault
2016-11-11T14:52:28.873Z,1478875948.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:28.895Z,1478875948.895 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T14:52:29.112Z,1478875949.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:29.374Z,1478875949.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:29.793Z,1478875949.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:29.853Z,1478875949.853 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:52:29.853Z,1478875949.853 [BPC1] No Fault, FailCount= 1
2016-11-11T14:52:30.229Z,1478875950.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:30.570Z,1478875950.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:30.999Z,1478875950.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:31.362Z,1478875951.362 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:31.362Z,1478875951.362 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 181
2016-11-11T14:52:31.362Z,1478875951.362 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:52:31.377Z,1478875951.377 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:31.377Z,1478875951.377 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 181
2016-11-11T14:52:31.377Z,1478875951.377 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:52:31.439Z,1478875951.439 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:31.440Z,1478875951.440 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 181
2016-11-11T14:52:31.440Z,1478875951.440 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:52:31.519Z,1478875951.519 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:52:31.520Z,1478875951.520 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:52:31.520Z,1478875951.520 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:52:31.815Z,1478875951.815 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:52:31.815Z,1478875951.815 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 181
2016-11-11T14:52:31.820Z,1478875951.820 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:52:31.820Z,1478875951.820 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 181
2016-11-11T14:52:31.821Z,1478875951.820 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:52:31.821Z,1478875951.820 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 181
2016-11-11T14:52:32.154Z,1478875952.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:52:32.154Z,1478875952.154 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:52:32.155Z,1478875952.155 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:52:32.168Z,1478875952.168 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:52:32.168Z,1478875952.168 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:52:32.168Z,1478875952.168 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:52:32.169Z,1478875952.169 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:52:32.169Z,1478875952.169 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:52:32.170Z,1478875952.170 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:52:32.570Z,1478875952.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:33.023Z,1478875953.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:33.381Z,1478875953.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:33.722Z,1478875953.722 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T14:52:33.800Z,1478875953.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:34.208Z,1478875954.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:34.569Z,1478875954.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:35.026Z,1478875955.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:35.380Z,1478875955.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:35.765Z,1478875955.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:36.162Z,1478875956.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:36.550Z,1478875956.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:37.040Z,1478875957.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:37.358Z,1478875957.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:37.763Z,1478875957.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:38.169Z,1478875958.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:38.569Z,1478875958.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:39.010Z,1478875959.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:39.308Z,1478875959.308 [NAL9602](INFO): Powering down
2016-11-11T14:52:39.394Z,1478875959.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:39.780Z,1478875959.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:40.177Z,1478875960.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:40.567Z,1478875960.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:41.014Z,1478875961.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:41.354Z,1478875961.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:41.765Z,1478875961.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:42.164Z,1478875962.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:42.563Z,1478875962.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:42.962Z,1478875962.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:43.358Z,1478875963.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:43.782Z,1478875963.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:44.171Z,1478875964.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:44.604Z,1478875964.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:44.979Z,1478875964.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:45.364Z,1478875965.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:45.775Z,1478875965.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:46.175Z,1478875966.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:46.548Z,1478875966.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:46.949Z,1478875966.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:47.349Z,1478875967.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:47.757Z,1478875967.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:48.147Z,1478875968.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:48.553Z,1478875968.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:48.982Z,1478875968.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:49.348Z,1478875969.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:49.757Z,1478875969.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:50.157Z,1478875970.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:50.552Z,1478875970.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:51.002Z,1478875971.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:51.361Z,1478875971.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:51.756Z,1478875971.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:52.167Z,1478875972.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:52.565Z,1478875972.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:53.020Z,1478875973.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:53.348Z,1478875973.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:53.753Z,1478875973.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:54.153Z,1478875974.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:54.562Z,1478875974.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:55.009Z,1478875975.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:55.348Z,1478875975.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:55.757Z,1478875975.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:56.158Z,1478875976.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:56.573Z,1478875976.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:56.957Z,1478875976.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:57.365Z,1478875977.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:57.785Z,1478875977.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:58.160Z,1478875978.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:58.560Z,1478875978.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:58.973Z,1478875978.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:59.345Z,1478875979.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:52:59.766Z,1478875979.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:00.144Z,1478875980.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:00.569Z,1478875980.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:00.949Z,1478875980.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:01.340Z,1478875981.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:01.749Z,1478875981.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:02.145Z,1478875982.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:02.544Z,1478875982.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:02.985Z,1478875982.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:03.349Z,1478875983.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:03.758Z,1478875983.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:04.143Z,1478875984.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:04.549Z,1478875984.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:04.997Z,1478875984.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:05.349Z,1478875985.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:05.757Z,1478875985.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:06.144Z,1478875986.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:06.545Z,1478875986.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:06.983Z,1478875986.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:07.345Z,1478875987.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:07.745Z,1478875987.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:08.149Z,1478875988.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:08.540Z,1478875988.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:08.984Z,1478875988.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:09.345Z,1478875989.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:09.749Z,1478875989.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:10.140Z,1478875990.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:10.549Z,1478875990.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:10.945Z,1478875990.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:11.366Z,1478875991.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:11.745Z,1478875991.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:12.145Z,1478875992.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:12.220Z,1478875992.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:12.562Z,1478875992.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:12.949Z,1478875992.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:13.016Z,1478875993.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:13.362Z,1478875993.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:13.769Z,1478875993.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:13.796Z,1478875993.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:14.149Z,1478875994.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:14.577Z,1478875994.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:14.592Z,1478875994.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:14.977Z,1478875994.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:15.382Z,1478875995.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:15.389Z,1478875995.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:15.749Z,1478875995.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:15.800Z,1478875995.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:16.145Z,1478875996.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:16.549Z,1478875996.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:17.009Z,1478875997.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:17.349Z,1478875997.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:17.753Z,1478875997.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:18.153Z,1478875998.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:18.553Z,1478875998.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:19.006Z,1478875999.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:19.349Z,1478875999.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:19.753Z,1478875999.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:20.145Z,1478876000.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:20.545Z,1478876000.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:20.969Z,1478876000.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:21.347Z,1478876001.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:21.748Z,1478876001.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:22.159Z,1478876002.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:22.549Z,1478876002.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:22.974Z,1478876002.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:23.357Z,1478876003.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:23.753Z,1478876003.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:24.157Z,1478876004.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:27.762Z,1478876007.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:27.926Z,1478876007.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:28.285Z,1478876008.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:28.673Z,1478876008.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:29.093Z,1478876009.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:29.487Z,1478876009.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:29.861Z,1478876009.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:30.260Z,1478876010.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:30.665Z,1478876010.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:31.065Z,1478876011.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:31.469Z,1478876011.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:31.866Z,1478876011.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:32.266Z,1478876012.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:32.665Z,1478876012.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:33.067Z,1478876013.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:33.470Z,1478876013.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:33.862Z,1478876013.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:34.268Z,1478876014.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:34.677Z,1478876014.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:35.065Z,1478876015.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:35.468Z,1478876015.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:35.865Z,1478876015.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:36.264Z,1478876016.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:36.671Z,1478876016.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:37.070Z,1478876017.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:37.472Z,1478876017.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:37.871Z,1478876017.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:38.272Z,1478876018.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:38.664Z,1478876018.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:39.078Z,1478876019.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:39.460Z,1478876019.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:39.859Z,1478876019.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:40.196Z,1478876020.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:40.314Z,1478876020.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:40.669Z,1478876020.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:40.992Z,1478876020.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:41.105Z,1478876021.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:41.465Z,1478876021.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:41.869Z,1478876021.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:42.289Z,1478876022.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:42.673Z,1478876022.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:43.094Z,1478876023.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:43.498Z,1478876023.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:43.862Z,1478876023.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:44.258Z,1478876024.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:44.665Z,1478876024.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:45.069Z,1478876025.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:45.468Z,1478876025.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:45.862Z,1478876025.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:46.268Z,1478876026.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:46.670Z,1478876026.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:47.062Z,1478876027.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:47.468Z,1478876027.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:47.872Z,1478876027.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:48.268Z,1478876028.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:48.671Z,1478876028.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:49.070Z,1478876029.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:49.469Z,1478876029.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:49.867Z,1478876029.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:50.108Z,1478876030.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:50.268Z,1478876030.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:50.669Z,1478876030.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:50.904Z,1478876030.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:51.069Z,1478876031.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:51.312Z,1478876031.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:51.472Z,1478876031.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:51.868Z,1478876031.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:52.108Z,1478876032.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:52.266Z,1478876032.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:52.668Z,1478876032.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:52.904Z,1478876032.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:53.069Z,1478876033.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:53.376Z,1478876033.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:53.470Z,1478876033.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:53.893Z,1478876033.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:54.172Z,1478876034.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:54.272Z,1478876034.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:54.671Z,1478876034.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:54.968Z,1478876034.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:55.072Z,1478876035.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:55.493Z,1478876035.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:55.720Z,1478876035.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:55.877Z,1478876035.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:56.301Z,1478876036.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:56.516Z,1478876036.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:56.660Z,1478876036.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:57.094Z,1478876037.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:57.312Z,1478876037.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:57.493Z,1478876037.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:57.726Z,1478876037.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:57.860Z,1478876037.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:58.263Z,1478876038.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:58.520Z,1478876038.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:58.659Z,1478876038.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:59.066Z,1478876039.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:59.248Z,1478876039.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:53:59.461Z,1478876039.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:53:59.870Z,1478876039.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:00.044Z,1478876040.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:00.270Z,1478876040.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:00.667Z,1478876040.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:00.841Z,1478876040.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:01.068Z,1478876041.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:01.252Z,1478876041.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:01.465Z,1478876041.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:01.871Z,1478876041.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:02.048Z,1478876042.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:02.272Z,1478876042.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:02.669Z,1478876042.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:02.845Z,1478876042.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:03.075Z,1478876043.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:03.257Z,1478876043.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:03.479Z,1478876043.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:03.873Z,1478876043.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:04.052Z,1478876044.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:04.257Z,1478876044.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:04.661Z,1478876044.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:04.849Z,1478876044.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:05.069Z,1478876045.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:05.260Z,1478876045.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:05.465Z,1478876045.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:05.865Z,1478876045.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:06.056Z,1478876046.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:06.268Z,1478876046.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:06.669Z,1478876046.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:06.852Z,1478876046.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:07.070Z,1478876047.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:07.348Z,1478876047.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:07.469Z,1478876047.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:07.894Z,1478876047.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:08.144Z,1478876048.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:08.253Z,1478876048.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:08.653Z,1478876048.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:08.940Z,1478876048.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:09.090Z,1478876049.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:09.458Z,1478876049.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:09.700Z,1478876049.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:09.898Z,1478876049.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:10.270Z,1478876050.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:10.496Z,1478876050.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:10.701Z,1478876050.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:11.060Z,1478876051.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:11.299Z,1478876051.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:11.511Z,1478876051.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:11.724Z,1478876051.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:11.869Z,1478876051.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:12.260Z,1478876052.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:12.520Z,1478876052.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:12.670Z,1478876052.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:13.072Z,1478876053.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:13.244Z,1478876053.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:13.475Z,1478876053.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:13.873Z,1478876053.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:14.040Z,1478876054.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:14.259Z,1478876054.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:14.658Z,1478876054.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:14.837Z,1478876054.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:15.064Z,1478876055.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:15.248Z,1478876055.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:15.458Z,1478876055.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:15.860Z,1478876055.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:16.044Z,1478876056.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:16.267Z,1478876056.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:16.670Z,1478876056.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:16.841Z,1478876056.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:17.073Z,1478876057.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:17.256Z,1478876057.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:17.469Z,1478876057.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:17.872Z,1478876057.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:18.052Z,1478876058.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:18.260Z,1478876058.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:18.659Z,1478876058.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:18.848Z,1478876058.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:19.064Z,1478876059.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:19.256Z,1478876059.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:19.459Z,1478876059.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:19.869Z,1478876059.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:20.052Z,1478876060.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:20.265Z,1478876060.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:20.670Z,1478876060.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:20.848Z,1478876060.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:21.073Z,1478876061.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:21.320Z,1478876061.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:21.461Z,1478876061.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:21.897Z,1478876061.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:22.116Z,1478876062.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:22.271Z,1478876062.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:22.672Z,1478876062.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:22.912Z,1478876062.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:23.072Z,1478876063.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:23.493Z,1478876063.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:23.676Z,1478876063.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:23.852Z,1478876063.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:24.259Z,1478876064.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:24.472Z,1478876064.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:25.273Z,1478876065.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:25.684Z,1478876065.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:26.480Z,1478876066.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:27.217Z,1478876067.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:27.746Z,1478876067.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:27.882Z,1478876067.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:28.012Z,1478876068.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:28.257Z,1478876068.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:28.643Z,1478876068.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:28.809Z,1478876068.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:29.045Z,1478876069.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:29.220Z,1478876069.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:29.425Z,1478876069.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:29.826Z,1478876069.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:30.016Z,1478876070.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:30.215Z,1478876070.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:30.623Z,1478876070.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:30.813Z,1478876070.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:31.024Z,1478876071.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:31.224Z,1478876071.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:31.416Z,1478876071.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:31.826Z,1478876071.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:32.020Z,1478876072.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:32.226Z,1478876072.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:32.618Z,1478876072.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:32.817Z,1478876072.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:33.016Z,1478876073.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:33.228Z,1478876073.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:33.426Z,1478876073.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:33.820Z,1478876073.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:34.024Z,1478876074.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:34.222Z,1478876074.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:34.622Z,1478876074.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:34.820Z,1478876074.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:35.025Z,1478876075.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:35.312Z,1478876075.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:35.423Z,1478876075.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:35.819Z,1478876075.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:36.108Z,1478876076.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:36.219Z,1478876076.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:36.625Z,1478876076.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:36.904Z,1478876076.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:37.033Z,1478876077.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:37.417Z,1478876077.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:37.656Z,1478876077.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:37.818Z,1478876077.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:38.227Z,1478876078.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:38.452Z,1478876078.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:38.627Z,1478876078.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:39.024Z,1478876079.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:39.249Z,1478876079.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:39.454Z,1478876079.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:39.664Z,1478876079.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:39.832Z,1478876079.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:40.229Z,1478876080.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:40.460Z,1478876080.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:40.638Z,1478876080.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:41.045Z,1478876081.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:41.184Z,1478876081.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:41.417Z,1478876081.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:41.853Z,1478876081.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:41.981Z,1478876081.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:42.216Z,1478876082.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:42.655Z,1478876082.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:42.777Z,1478876082.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:43.056Z,1478876083.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:43.192Z,1478876083.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:43.419Z,1478876083.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:43.825Z,1478876083.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:43.988Z,1478876083.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:44.219Z,1478876084.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:44.618Z,1478876084.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:44.789Z,1478876084.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:45.030Z,1478876085.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:45.208Z,1478876085.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:45.426Z,1478876085.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:45.816Z,1478876085.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:46.006Z,1478876086.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:46.227Z,1478876086.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:46.628Z,1478876086.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:46.801Z,1478876086.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:47.022Z,1478876087.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:47.212Z,1478876087.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:47.427Z,1478876087.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:47.828Z,1478876087.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:48.009Z,1478876088.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:48.220Z,1478876088.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:48.635Z,1478876088.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:48.804Z,1478876088.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:49.033Z,1478876089.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:49.296Z,1478876089.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:49.408Z,1478876089.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:49.830Z,1478876089.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:50.092Z,1478876090.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:50.225Z,1478876090.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:50.615Z,1478876090.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:50.888Z,1478876090.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:51.024Z,1478876091.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:51.421Z,1478876091.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:51.632Z,1478876091.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:51.819Z,1478876091.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:52.221Z,1478876092.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:52.428Z,1478876092.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:52.623Z,1478876092.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:53.023Z,1478876093.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:53.225Z,1478876093.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:53.425Z,1478876093.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:53.636Z,1478876093.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:53.825Z,1478876093.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:54.209Z,1478876094.210 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T14:54:54.210Z,1478876094.210 [BPC1] Data Fault, FailCount= 1
2016-11-11T14:54:54.210Z,1478876094.210 [BPC1](ERROR): Data Fault
2016-11-11T14:54:54.218Z,1478876094.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:54.239Z,1478876094.239 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T14:54:54.432Z,1478876094.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:54.629Z,1478876094.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:55.026Z,1478876095.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:55.169Z,1478876095.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:55.418Z,1478876095.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:55.438Z,1478876095.438 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:54:55.438Z,1478876095.438 [BPC1] No Fault, FailCount= 1
2016-11-11T14:54:55.866Z,1478876095.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:55.964Z,1478876095.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:56.221Z,1478876096.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:56.637Z,1478876096.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:56.761Z,1478876096.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:57.033Z,1478876097.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:57.172Z,1478876097.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:57.428Z,1478876097.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:57.824Z,1478876097.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:57.968Z,1478876097.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:58.231Z,1478876098.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:58.636Z,1478876098.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:58.766Z,1478876098.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:59.032Z,1478876099.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:59.180Z,1478876099.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:54:59.435Z,1478876099.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:59.830Z,1478876099.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:54:59.976Z,1478876099.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:00.208Z,1478876100.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:00.629Z,1478876100.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:00.773Z,1478876100.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:01.020Z,1478876101.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:01.188Z,1478876101.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:01.415Z,1478876101.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:01.814Z,1478876101.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:01.985Z,1478876101.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:02.219Z,1478876102.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:02.615Z,1478876102.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:02.780Z,1478876102.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:03.029Z,1478876103.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:03.276Z,1478876103.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:03.425Z,1478876103.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:03.817Z,1478876103.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:04.072Z,1478876104.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:04.217Z,1478876104.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:04.629Z,1478876104.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:04.868Z,1478876104.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:05.022Z,1478876105.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:05.421Z,1478876105.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:05.616Z,1478876105.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:05.829Z,1478876105.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:06.222Z,1478876106.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:06.412Z,1478876106.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:06.624Z,1478876106.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:07.022Z,1478876107.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:07.210Z,1478876107.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:07.428Z,1478876107.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:07.624Z,1478876107.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:07.827Z,1478876107.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:08.229Z,1478876108.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:08.420Z,1478876108.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:08.688Z,1478876108.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:09.028Z,1478876109.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:09.140Z,1478876109.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:09.425Z,1478876109.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:09.868Z,1478876109.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:09.936Z,1478876109.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:10.217Z,1478876110.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:10.649Z,1478876110.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:10.732Z,1478876110.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:11.049Z,1478876111.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:11.144Z,1478876111.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:11.425Z,1478876111.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:11.820Z,1478876111.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:11.940Z,1478876111.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:12.215Z,1478876112.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:12.625Z,1478876112.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:12.737Z,1478876112.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:13.043Z,1478876113.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:13.148Z,1478876113.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:13.420Z,1478876113.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:13.821Z,1478876113.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:13.944Z,1478876113.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:14.216Z,1478876114.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:14.616Z,1478876114.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:14.741Z,1478876114.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:15.021Z,1478876115.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:15.152Z,1478876115.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:15.433Z,1478876115.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:15.829Z,1478876115.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:15.948Z,1478876115.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:16.237Z,1478876116.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:16.609Z,1478876116.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:16.744Z,1478876116.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:17.036Z,1478876117.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:17.244Z,1478876117.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:17.440Z,1478876117.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:17.808Z,1478876117.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:18.040Z,1478876118.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:18.214Z,1478876118.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:18.618Z,1478876118.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:18.836Z,1478876118.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:19.016Z,1478876119.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:19.414Z,1478876119.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:19.596Z,1478876119.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:19.818Z,1478876119.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:20.222Z,1478876120.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:20.394Z,1478876120.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:20.617Z,1478876120.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:21.018Z,1478876121.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:21.189Z,1478876121.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:21.429Z,1478876121.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:21.604Z,1478876121.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:21.823Z,1478876121.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:22.222Z,1478876122.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:22.400Z,1478876122.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:22.637Z,1478876122.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:23.041Z,1478876123.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:23.064Z,1478876123.064 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T14:55:23.064Z,1478876123.064 [Default:CheckIn:C.Wait] Stopped
2016-11-11T14:55:23.064Z,1478876123.065 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T14:55:23.065Z,1478876123.065 [Default:CheckIn:D] Running Loop=1
2016-11-11T14:55:23.144Z,1478876123.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:23.461Z,1478876123.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:23.488Z,1478876123.488 [Default:CheckIn:D] Stopped
2016-11-11T14:55:23.488Z,1478876123.489 [Default:CheckIn:E] Running Loop=1
2016-11-11T14:55:23.811Z,1478876123.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:23.820Z,1478876123.820 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 605.369661 min 
2016-11-11T14:55:23.820Z,1478876123.820 [Default:CheckIn:E] Stopped
2016-11-11T14:55:23.820Z,1478876123.820 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T14:55:23.820Z,1478876123.820 [Default:CheckIn] Stopped
2016-11-11T14:55:23.820Z,1478876123.820 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T14:55:23.821Z,1478876123.821 [Default:CheckIn](INFO): Running loop #59
2016-11-11T14:55:23.821Z,1478876123.821 [Default:CheckIn] Running Loop=59
2016-11-11T14:55:23.821Z,1478876123.821 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T14:55:23.821Z,1478876123.821 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T14:55:23.940Z,1478876123.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:24.252Z,1478876124.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:24.581Z,1478876124.580 [NAL9602](INFO): Powering up
2016-11-11T14:55:24.633Z,1478876124.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:24.737Z,1478876124.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:25.148Z,1478876125.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:25.944Z,1478876125.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:26.740Z,1478876126.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:27.148Z,1478876127.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:27.945Z,1478876127.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:27.993Z,1478876127.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:28.113Z,1478876128.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:28.497Z,1478876128.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:28.741Z,1478876128.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:28.870Z,1478876128.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:29.152Z,1478876129.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:29.264Z,1478876129.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:29.669Z,1478876129.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:29.948Z,1478876129.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:30.064Z,1478876130.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:30.467Z,1478876130.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:30.744Z,1478876130.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:30.901Z,1478876130.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:31.252Z,1478876131.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:31.277Z,1478876131.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:31.676Z,1478876131.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:32.048Z,1478876132.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:32.081Z,1478876132.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:32.465Z,1478876132.465 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:32.465Z,1478876132.465 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 182
2016-11-11T14:55:32.465Z,1478876132.465 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:55:32.500Z,1478876132.500 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:32.501Z,1478876132.500 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 182
2016-11-11T14:55:32.501Z,1478876132.501 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:55:32.503Z,1478876132.503 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:32.503Z,1478876132.503 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 182
2016-11-11T14:55:32.507Z,1478876132.507 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:55:32.530Z,1478876132.530 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:55:32.530Z,1478876132.530 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:55:32.531Z,1478876132.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:55:32.844Z,1478876132.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:32.890Z,1478876132.890 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:55:32.890Z,1478876132.890 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 182
2016-11-11T14:55:32.891Z,1478876132.891 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:55:32.891Z,1478876132.891 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 182
2016-11-11T14:55:32.896Z,1478876132.895 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:55:32.896Z,1478876132.896 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 182
2016-11-11T14:55:33.257Z,1478876133.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:55:33.258Z,1478876133.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:55:33.258Z,1478876133.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:55:33.263Z,1478876133.263 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:55:33.263Z,1478876133.263 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:55:33.264Z,1478876133.263 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:55:33.264Z,1478876133.264 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:55:33.264Z,1478876133.264 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:55:33.265Z,1478876133.265 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:55:33.572Z,1478876133.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:33.669Z,1478876133.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:34.077Z,1478876134.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:34.368Z,1478876134.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:34.471Z,1478876134.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:34.873Z,1478876134.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:35.170Z,1478876135.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:35.274Z,1478876135.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:35.588Z,1478876135.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:35.629Z,1478876135.629 [NAL9602](INFO): NAL9602 initialized
2016-11-11T14:55:35.684Z,1478876135.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:36.116Z,1478876136.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:36.384Z,1478876136.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:36.482Z,1478876136.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:36.879Z,1478876136.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:37.100Z,1478876137.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:37.283Z,1478876137.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:37.676Z,1478876137.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:37.896Z,1478876137.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:38.071Z,1478876138.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:38.477Z,1478876138.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:38.698Z,1478876138.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:38.877Z,1478876138.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:39.144Z,1478876139.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:39.276Z,1478876139.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:39.679Z,1478876139.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:39.940Z,1478876139.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:40.077Z,1478876140.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:40.533Z,1478876140.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:40.736Z,1478876140.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:40.890Z,1478876140.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:41.144Z,1478876141.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:41.296Z,1478876141.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:41.665Z,1478876141.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:41.940Z,1478876141.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:42.103Z,1478876142.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:42.491Z,1478876142.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:42.738Z,1478876142.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:42.871Z,1478876142.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:43.148Z,1478876143.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:43.269Z,1478876143.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:43.674Z,1478876143.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:43.946Z,1478876143.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:44.073Z,1478876144.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:44.476Z,1478876144.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:44.740Z,1478876144.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:44.885Z,1478876144.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:45.236Z,1478876145.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:45.274Z,1478876145.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:45.676Z,1478876145.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:46.033Z,1478876146.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:46.077Z,1478876146.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:46.468Z,1478876146.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:46.828Z,1478876146.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:46.880Z,1478876146.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:47.269Z,1478876147.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:47.548Z,1478876147.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:47.684Z,1478876147.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:48.069Z,1478876148.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:48.344Z,1478876148.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:48.466Z,1478876148.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:48.870Z,1478876148.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:49.141Z,1478876149.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:49.275Z,1478876149.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:49.552Z,1478876149.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:49.669Z,1478876149.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:50.081Z,1478876150.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:50.348Z,1478876150.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:50.477Z,1478876150.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:50.872Z,1478876150.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:51.076Z,1478876151.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:51.277Z,1478876151.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:51.671Z,1478876151.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:51.872Z,1478876151.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:52.069Z,1478876152.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:52.476Z,1478876152.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:52.669Z,1478876152.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:52.876Z,1478876152.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:53.092Z,1478876153.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:53.276Z,1478876153.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:53.675Z,1478876153.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:53.888Z,1478876153.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:54.078Z,1478876154.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:54.513Z,1478876154.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:54.685Z,1478876154.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:54.884Z,1478876154.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:55.096Z,1478876155.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:55.261Z,1478876155.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:55.697Z,1478876155.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:55.892Z,1478876155.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:56.085Z,1478876156.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:56.490Z,1478876156.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:56.689Z,1478876156.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:56.909Z,1478876156.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:57.100Z,1478876157.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:57.265Z,1478876157.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:57.660Z,1478876157.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:57.896Z,1478876157.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:58.069Z,1478876158.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:58.469Z,1478876158.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:58.692Z,1478876158.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:58.865Z,1478876158.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:59.168Z,1478876159.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:55:59.272Z,1478876159.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:59.669Z,1478876159.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:55:59.964Z,1478876159.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:00.069Z,1478876160.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:00.472Z,1478876160.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:00.760Z,1478876160.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:00.869Z,1478876160.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:00.889Z,1478876160.889 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T14:56:01.266Z,1478876161.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:01.532Z,1478876161.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:01.666Z,1478876161.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:02.069Z,1478876162.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:02.328Z,1478876162.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:02.473Z,1478876162.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:02.869Z,1478876162.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:03.125Z,1478876163.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:03.269Z,1478876163.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:03.536Z,1478876163.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:03.669Z,1478876163.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:04.072Z,1478876164.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:04.332Z,1478876164.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:04.474Z,1478876164.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:04.878Z,1478876164.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:05.056Z,1478876165.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:05.278Z,1478876165.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:05.681Z,1478876165.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:05.852Z,1478876165.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:06.091Z,1478876166.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:06.502Z,1478876166.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:06.649Z,1478876166.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:06.886Z,1478876166.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:07.060Z,1478876167.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:07.264Z,1478876167.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:07.625Z,1478876167.625 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-11T14:56:07.699Z,1478876167.699 [NAL9602](FAULT): received: 
+CSQ:0

OK8, 2, 0, 0, 0

OK
2016-11-11T14:56:07.699Z,1478876167.699 [NAL9602] Data Fault, FailCount= 1
2016-11-11T14:56:07.699Z,1478876167.699 [NAL9602](ERROR): Data Fault
2016-11-11T14:56:07.757Z,1478876167.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:07.804Z,1478876167.804 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T14:56:07.856Z,1478876167.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:08.024Z,1478876168.024 [NAL9602](INFO): Powering down
2016-11-11T14:56:08.065Z,1478876168.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:08.473Z,1478876168.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:08.653Z,1478876168.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:08.929Z,1478876168.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:08.972Z,1478876168.972 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T14:56:08.972Z,1478876168.972 [NAL9602] No Fault, FailCount= 1
2016-11-11T14:56:09.064Z,1478876169.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:09.281Z,1478876169.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:09.665Z,1478876169.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:09.860Z,1478876169.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:10.112Z,1478876170.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:10.466Z,1478876170.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:10.657Z,1478876170.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:10.910Z,1478876170.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:11.068Z,1478876171.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:11.293Z,1478876171.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:11.673Z,1478876171.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:11.864Z,1478876171.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:12.074Z,1478876172.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:12.472Z,1478876172.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:12.660Z,1478876172.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:12.865Z,1478876172.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:13.225Z,1478876173.225 [NAL9602](INFO): Powering up NAL9602
2016-11-11T14:56:13.278Z,1478876173.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:13.456Z,1478876173.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:13.673Z,1478876173.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:13.944Z,1478876173.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:14.069Z,1478876174.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:14.476Z,1478876174.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:14.740Z,1478876174.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:14.873Z,1478876174.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:15.273Z,1478876175.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:15.508Z,1478876175.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:15.685Z,1478876175.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:16.069Z,1478876176.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:16.304Z,1478876176.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:16.481Z,1478876176.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:16.874Z,1478876176.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:17.101Z,1478876177.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:17.268Z,1478876177.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:17.516Z,1478876177.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:17.666Z,1478876177.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:18.068Z,1478876178.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:18.312Z,1478876178.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:18.469Z,1478876178.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:18.877Z,1478876178.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:19.036Z,1478876179.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:19.273Z,1478876179.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:19.669Z,1478876179.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:19.832Z,1478876179.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:20.077Z,1478876180.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:20.473Z,1478876180.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:20.629Z,1478876180.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:20.865Z,1478876180.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:21.040Z,1478876181.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:21.273Z,1478876181.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:21.665Z,1478876181.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:21.836Z,1478876181.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:22.069Z,1478876182.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:22.468Z,1478876182.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:22.635Z,1478876182.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:22.868Z,1478876182.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:23.048Z,1478876183.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:23.317Z,1478876183.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:23.673Z,1478876183.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:23.845Z,1478876183.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:24.077Z,1478876184.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:24.425Z,1478876184.425 [NAL9602](INFO): NAL9602 initialized
2016-11-11T14:56:24.508Z,1478876184.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:24.641Z,1478876184.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:24.869Z,1478876184.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:25.052Z,1478876185.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:25.848Z,1478876185.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:26.644Z,1478876186.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:27.148Z,1478876187.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:27.944Z,1478876187.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:28.421Z,1478876188.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:28.573Z,1478876188.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:28.742Z,1478876188.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:28.961Z,1478876188.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:29.327Z,1478876189.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:29.488Z,1478876189.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:29.732Z,1478876189.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:30.137Z,1478876190.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:30.284Z,1478876190.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:30.538Z,1478876190.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:30.946Z,1478876190.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:31.081Z,1478876191.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:31.346Z,1478876191.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:31.492Z,1478876191.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:31.751Z,1478876191.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:32.133Z,1478876192.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:32.288Z,1478876192.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:32.540Z,1478876192.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:32.932Z,1478876192.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:33.016Z,1478876193.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:33.331Z,1478876193.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:33.731Z,1478876193.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:33.812Z,1478876193.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:34.136Z,1478876194.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:34.538Z,1478876194.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:34.609Z,1478876194.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:34.951Z,1478876194.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:35.044Z,1478876195.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:35.348Z,1478876195.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:35.747Z,1478876195.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:35.840Z,1478876195.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:36.127Z,1478876196.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:36.523Z,1478876196.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:36.636Z,1478876196.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:36.941Z,1478876196.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:37.044Z,1478876197.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:37.341Z,1478876197.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:37.738Z,1478876197.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:37.840Z,1478876197.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:38.148Z,1478876198.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:38.551Z,1478876198.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:38.636Z,1478876198.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:38.944Z,1478876198.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:39.044Z,1478876199.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:39.344Z,1478876199.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:39.769Z,1478876199.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:39.840Z,1478876199.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:40.148Z,1478876200.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:40.548Z,1478876200.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:40.637Z,1478876200.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:40.981Z,1478876200.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:41.128Z,1478876201.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:41.354Z,1478876201.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:41.734Z,1478876201.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:41.924Z,1478876201.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:42.165Z,1478876202.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:42.537Z,1478876202.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:42.720Z,1478876202.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:42.969Z,1478876202.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:43.341Z,1478876203.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:43.468Z,1478876203.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:43.762Z,1478876203.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:44.154Z,1478876204.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:44.264Z,1478876204.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:44.553Z,1478876204.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:44.961Z,1478876204.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:45.061Z,1478876205.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:45.339Z,1478876205.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:45.472Z,1478876205.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:45.730Z,1478876205.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:46.150Z,1478876206.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:46.269Z,1478876206.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:46.545Z,1478876206.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:46.946Z,1478876206.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:47.012Z,1478876207.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:47.345Z,1478876207.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:47.749Z,1478876207.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:47.808Z,1478876207.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:48.131Z,1478876208.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:48.529Z,1478876208.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:48.604Z,1478876208.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:48.943Z,1478876208.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:49.016Z,1478876209.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:49.363Z,1478876209.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:49.731Z,1478876209.731 [PNI_TCM](ERROR): CRC does not match. Expected:0x8426 got:0x48992
2016-11-11T14:56:49.750Z,1478876209.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:49.812Z,1478876209.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:50.148Z,1478876210.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:50.531Z,1478876210.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:50.609Z,1478876210.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:50.948Z,1478876210.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:51.020Z,1478876211.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:51.330Z,1478876211.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:51.731Z,1478876211.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:51.816Z,1478876211.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:52.135Z,1478876212.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:52.541Z,1478876212.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:52.612Z,1478876212.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:52.934Z,1478876212.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:53.020Z,1478876213.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:53.343Z,1478876213.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:53.737Z,1478876213.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:53.816Z,1478876213.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:54.149Z,1478876214.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:54.549Z,1478876214.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:54.612Z,1478876214.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:54.957Z,1478876214.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:55.084Z,1478876215.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:55.342Z,1478876215.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:55.777Z,1478876215.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:55.880Z,1478876215.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:56.130Z,1478876216.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:56.565Z,1478876216.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:56.676Z,1478876216.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:56.937Z,1478876216.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:57.364Z,1478876217.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:57.436Z,1478876217.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:57.766Z,1478876217.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:58.133Z,1478876218.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:58.232Z,1478876218.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:58.534Z,1478876218.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:58.933Z,1478876218.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:59.029Z,1478876219.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:59.346Z,1478876219.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:56:59.444Z,1478876219.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:56:59.744Z,1478876219.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:00.137Z,1478876220.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:00.240Z,1478876220.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:00.597Z,1478876220.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:00.914Z,1478876220.914 [PNI_TCM](ERROR): CRC does not match. Expected:0x54867 got:0x16870
2016-11-11T14:57:00.938Z,1478876220.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:00.980Z,1478876220.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:01.329Z,1478876221.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:01.725Z,1478876221.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:01.776Z,1478876221.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:02.126Z,1478876222.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:02.573Z,1478876222.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:02.587Z,1478876222.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:02.933Z,1478876222.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:02.984Z,1478876222.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:03.351Z,1478876223.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:03.742Z,1478876223.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:03.780Z,1478876223.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:04.145Z,1478876224.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:04.576Z,1478876224.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:04.593Z,1478876224.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:04.933Z,1478876224.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:04.988Z,1478876224.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:05.334Z,1478876225.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:05.738Z,1478876225.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:05.785Z,1478876225.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:06.132Z,1478876226.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:06.580Z,1478876226.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:06.602Z,1478876226.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:06.941Z,1478876226.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:06.988Z,1478876226.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:07.336Z,1478876227.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:07.733Z,1478876227.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:07.784Z,1478876227.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:08.130Z,1478876228.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:08.535Z,1478876228.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:08.580Z,1478876228.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:08.933Z,1478876228.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:09.056Z,1478876229.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:09.349Z,1478876229.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:09.807Z,1478876229.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:09.852Z,1478876229.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:10.137Z,1478876230.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:10.535Z,1478876230.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:10.648Z,1478876230.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:10.942Z,1478876230.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:11.339Z,1478876231.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:11.428Z,1478876231.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:11.740Z,1478876231.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:12.153Z,1478876232.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:12.224Z,1478876232.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:12.545Z,1478876232.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:12.914Z,1478876232.914 [BPC1](ERROR): Failed to receive battery data
2016-11-11T14:57:12.914Z,1478876232.914 [BPC1] Communications Fault, FailCount= 1
2016-11-11T14:57:12.914Z,1478876232.914 [BPC1](ERROR): Communications Fault
2016-11-11T14:57:12.954Z,1478876232.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:13.020Z,1478876233.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:13.061Z,1478876233.061 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T14:57:13.333Z,1478876233.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:13.432Z,1478876233.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:13.728Z,1478876233.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:14.135Z,1478876234.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:14.179Z,1478876234.179 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T14:57:14.179Z,1478876234.180 [BPC1] No Fault, FailCount= 1
2016-11-11T14:57:14.228Z,1478876234.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:14.665Z,1478876234.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:14.968Z,1478876234.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:14.970Z,1478876234.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:15.329Z,1478876235.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:15.740Z,1478876235.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:15.764Z,1478876235.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:16.145Z,1478876236.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:16.561Z,1478876236.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:16.578Z,1478876236.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:16.953Z,1478876236.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:16.996Z,1478876236.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:17.369Z,1478876237.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:17.758Z,1478876237.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:17.792Z,1478876237.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:18.142Z,1478876238.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:18.588Z,1478876238.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:18.598Z,1478876238.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:18.926Z,1478876238.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:18.996Z,1478876238.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:19.334Z,1478876239.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:19.729Z,1478876239.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:19.792Z,1478876239.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:20.158Z,1478876240.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:20.588Z,1478876240.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:20.616Z,1478876240.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:20.957Z,1478876240.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:20.996Z,1478876240.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:21.370Z,1478876241.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:21.750Z,1478876241.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:21.792Z,1478876241.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:22.146Z,1478876242.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:22.548Z,1478876242.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:22.588Z,1478876242.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:22.945Z,1478876242.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:23.032Z,1478876243.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:23.343Z,1478876243.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:23.725Z,1478876243.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:23.828Z,1478876243.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:24.142Z,1478876244.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:24.559Z,1478876244.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:24.624Z,1478876244.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:24.937Z,1478876244.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:25.388Z,1478876245.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:26.184Z,1478876246.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:26.980Z,1478876246.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:27.400Z,1478876247.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:28.196Z,1478876248.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:28.924Z,1478876248.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:29.193Z,1478876249.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:29.342Z,1478876249.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:29.720Z,1478876249.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:29.729Z,1478876249.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:30.153Z,1478876250.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:30.516Z,1478876250.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:30.573Z,1478876250.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:30.926Z,1478876250.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:30.960Z,1478876250.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:31.329Z,1478876251.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:31.722Z,1478876251.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:31.764Z,1478876251.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:32.125Z,1478876252.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:32.564Z,1478876252.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:32.606Z,1478876252.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:32.920Z,1478876252.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:32.972Z,1478876252.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:33.381Z,1478876253.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:33.698Z,1478876253.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:33.768Z,1478876253.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:34.155Z,1478876254.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:34.564Z,1478876254.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:34.588Z,1478876254.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:34.909Z,1478876254.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:34.972Z,1478876254.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:35.351Z,1478876255.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:35.705Z,1478876255.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:35.768Z,1478876255.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:36.122Z,1478876256.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:36.482Z,1478876256.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:36.564Z,1478876256.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:36.898Z,1478876256.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:37.032Z,1478876257.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:37.305Z,1478876257.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:37.741Z,1478876257.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:37.828Z,1478876257.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:38.105Z,1478876258.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:38.519Z,1478876258.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:38.624Z,1478876258.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:38.916Z,1478876258.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:39.337Z,1478876259.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:39.396Z,1478876259.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:39.708Z,1478876259.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:40.122Z,1478876260.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:40.192Z,1478876260.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:40.514Z,1478876260.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:40.913Z,1478876260.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:40.988Z,1478876260.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:41.286Z,1478876261.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:41.400Z,1478876261.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:41.722Z,1478876261.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:42.123Z,1478876262.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:42.196Z,1478876262.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:42.556Z,1478876262.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:42.909Z,1478876262.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:42.944Z,1478876262.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:43.314Z,1478876263.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:43.715Z,1478876263.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:43.740Z,1478876263.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:44.129Z,1478876264.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:44.536Z,1478876264.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:44.622Z,1478876264.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:44.918Z,1478876264.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:44.944Z,1478876264.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:45.325Z,1478876265.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:45.740Z,1478876265.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:45.783Z,1478876265.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:46.117Z,1478876266.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:46.536Z,1478876266.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:46.557Z,1478876266.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:46.905Z,1478876266.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:46.944Z,1478876266.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:47.295Z,1478876267.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:47.699Z,1478876267.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:47.740Z,1478876267.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:48.146Z,1478876268.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:48.536Z,1478876268.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:48.554Z,1478876268.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:48.893Z,1478876268.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:48.944Z,1478876268.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:49.287Z,1478876269.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:49.695Z,1478876269.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:49.740Z,1478876269.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:50.101Z,1478876270.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:50.501Z,1478876270.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:50.536Z,1478876270.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:50.914Z,1478876270.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:50.996Z,1478876270.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:51.303Z,1478876271.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:51.745Z,1478876271.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:51.792Z,1478876271.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:52.101Z,1478876272.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:52.508Z,1478876272.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:52.588Z,1478876272.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:52.885Z,1478876272.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:53.297Z,1478876273.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:53.344Z,1478876273.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:53.690Z,1478876273.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:54.100Z,1478876274.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:54.140Z,1478876274.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:54.492Z,1478876274.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:54.937Z,1478876274.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:54.956Z,1478876274.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:55.317Z,1478876275.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:55.372Z,1478876275.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:55.712Z,1478876275.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:56.106Z,1478876276.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:56.168Z,1478876276.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:56.537Z,1478876276.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:56.889Z,1478876276.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:56.964Z,1478876276.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:57.293Z,1478876277.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:57.735Z,1478876277.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:57.760Z,1478876277.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:58.090Z,1478876278.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:58.503Z,1478876278.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:58.556Z,1478876278.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:58.914Z,1478876278.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:59.304Z,1478876279.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:57:59.352Z,1478876279.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:57:59.725Z,1478876279.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:00.131Z,1478876280.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:00.148Z,1478876280.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:00.514Z,1478876280.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:00.910Z,1478876280.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:00.944Z,1478876280.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:01.308Z,1478876281.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:01.685Z,1478876281.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:01.740Z,1478876281.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:02.125Z,1478876282.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:02.518Z,1478876282.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:02.536Z,1478876282.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:02.897Z,1478876282.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:03.294Z,1478876283.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:03.332Z,1478876283.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:03.693Z,1478876283.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:04.106Z,1478876284.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:04.128Z,1478876284.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:04.512Z,1478876284.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:04.537Z,1478876284.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:04.901Z,1478876284.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:04.948Z,1478876284.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:05.323Z,1478876285.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:05.356Z,1478876285.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:05.702Z,1478876285.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:05.764Z,1478876285.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:06.113Z,1478876286.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:06.172Z,1478876286.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:06.506Z,1478876286.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:06.929Z,1478876286.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:06.968Z,1478876286.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:07.293Z,1478876287.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:07.376Z,1478876287.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:07.693Z,1478876287.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:08.092Z,1478876288.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:08.172Z,1478876288.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:08.499Z,1478876288.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:08.949Z,1478876288.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:08.968Z,1478876288.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:09.300Z,1478876289.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:09.376Z,1478876289.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:09.701Z,1478876289.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:10.100Z,1478876290.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:10.172Z,1478876290.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:10.561Z,1478876290.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:10.864Z,1478876290.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:10.916Z,1478876290.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:11.308Z,1478876291.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:11.660Z,1478876291.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:11.720Z,1478876291.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:12.118Z,1478876292.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:12.457Z,1478876292.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:12.533Z,1478876292.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:12.876Z,1478876292.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:12.937Z,1478876292.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:13.304Z,1478876293.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:13.672Z,1478876293.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:13.713Z,1478876293.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:14.117Z,1478876294.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:14.469Z,1478876294.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:14.529Z,1478876294.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:14.876Z,1478876294.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:14.905Z,1478876294.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:15.293Z,1478876295.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:15.672Z,1478876295.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:15.737Z,1478876295.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:16.091Z,1478876296.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:16.468Z,1478876296.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:16.532Z,1478876296.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:16.878Z,1478876296.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:16.901Z,1478876296.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:17.289Z,1478876297.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:17.672Z,1478876297.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:17.697Z,1478876297.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:18.106Z,1478876298.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:18.468Z,1478876298.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:18.493Z,1478876298.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:18.898Z,1478876298.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:18.960Z,1478876298.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:19.301Z,1478876299.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:19.699Z,1478876299.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:19.757Z,1478876299.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:20.097Z,1478876300.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:20.507Z,1478876300.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:20.552Z,1478876300.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:20.964Z,1478876300.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:21.291Z,1478876301.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:21.336Z,1478876301.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:21.716Z,1478876301.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:22.115Z,1478876302.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:22.132Z,1478876302.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:22.489Z,1478876302.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:22.928Z,1478876302.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:22.944Z,1478876302.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:23.292Z,1478876303.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:23.340Z,1478876303.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:23.697Z,1478876303.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:24.089Z,1478876304.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:24.136Z,1478876304.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:24.533Z,1478876304.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:24.828Z,1478876304.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:24.909Z,1478876304.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:25.289Z,1478876305.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:25.624Z,1478876305.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:26.421Z,1478876306.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:26.840Z,1478876306.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:27.636Z,1478876307.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:28.433Z,1478876308.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:28.788Z,1478876308.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:28.844Z,1478876308.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:28.912Z,1478876308.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:29.293Z,1478876309.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:29.640Z,1478876309.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:29.700Z,1478876309.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:30.104Z,1478876310.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:30.436Z,1478876310.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:30.515Z,1478876310.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:30.848Z,1478876310.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:30.901Z,1478876310.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:31.305Z,1478876311.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:31.645Z,1478876311.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:31.697Z,1478876311.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:32.077Z,1478876312.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:32.440Z,1478876312.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:32.505Z,1478876312.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:32.889Z,1478876312.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:32.944Z,1478876312.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:33.276Z,1478876313.276 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:33.276Z,1478876313.276 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 183
2016-11-11T14:58:33.276Z,1478876313.276 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T14:58:33.282Z,1478876313.283 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:33.283Z,1478876313.283 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 183
2016-11-11T14:58:33.283Z,1478876313.283 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T14:58:33.285Z,1478876313.285 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:33.285Z,1478876313.285 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 183
2016-11-11T14:58:33.285Z,1478876313.285 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T14:58:33.299Z,1478876313.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T14:58:33.300Z,1478876313.300 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T14:58:33.300Z,1478876313.300 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T14:58:33.717Z,1478876313.717 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T14:58:33.717Z,1478876313.717 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 183
2016-11-11T14:58:33.718Z,1478876313.718 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T14:58:33.718Z,1478876313.718 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 183
2016-11-11T14:58:33.719Z,1478876313.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T14:58:33.719Z,1478876313.719 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 183
2016-11-11T14:58:33.740Z,1478876313.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:34.092Z,1478876314.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T14:58:34.092Z,1478876314.092 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:58:34.093Z,1478876314.093 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:58:34.097Z,1478876314.097 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T14:58:34.098Z,1478876314.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:58:34.098Z,1478876314.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:58:34.098Z,1478876314.098 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T14:58:34.099Z,1478876314.099 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T14:58:34.099Z,1478876314.099 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T14:58:34.497Z,1478876314.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:34.536Z,1478876314.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:34.954Z,1478876314.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:35.272Z,1478876315.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:35.288Z,1478876315.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:35.682Z,1478876315.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:36.074Z,1478876316.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:36.084Z,1478876316.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:36.493Z,1478876316.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:36.885Z,1478876316.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:36.923Z,1478876316.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:37.289Z,1478876317.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:37.672Z,1478876317.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:37.711Z,1478876317.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:38.073Z,1478876318.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:38.128Z,1478876318.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:38.486Z,1478876318.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:38.812Z,1478876318.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:38.889Z,1478876318.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:39.287Z,1478876319.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:39.608Z,1478876319.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:39.693Z,1478876319.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:40.090Z,1478876320.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:40.416Z,1478876320.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:40.507Z,1478876320.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:40.885Z,1478876320.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:40.896Z,1478876320.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:41.289Z,1478876321.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:41.681Z,1478876321.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:41.692Z,1478876321.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:42.117Z,1478876322.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:42.475Z,1478876322.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:42.488Z,1478876322.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:42.882Z,1478876322.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:42.896Z,1478876322.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:43.317Z,1478876323.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:43.681Z,1478876323.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:43.692Z,1478876323.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:44.125Z,1478876324.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:44.488Z,1478876324.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:44.500Z,1478876324.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:44.896Z,1478876324.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:44.922Z,1478876324.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:45.319Z,1478876325.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:45.692Z,1478876325.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:45.694Z,1478876325.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:46.089Z,1478876326.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:46.489Z,1478876326.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:46.533Z,1478876326.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:46.885Z,1478876326.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:46.900Z,1478876326.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:47.285Z,1478876327.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:47.685Z,1478876327.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:47.696Z,1478876327.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:48.089Z,1478876328.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:48.492Z,1478876328.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:48.493Z,1478876328.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:48.922Z,1478876328.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:49.288Z,1478876329.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:49.302Z,1478876329.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:49.693Z,1478876329.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:49.696Z,1478876329.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:50.097Z,1478876330.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:50.492Z,1478876330.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:50.494Z,1478876330.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:50.937Z,1478876330.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:51.260Z,1478876331.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:51.274Z,1478876331.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:51.681Z,1478876331.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:52.056Z,1478876332.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:52.084Z,1478876332.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:52.506Z,1478876332.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:52.788Z,1478876332.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:52.892Z,1478876332.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:53.289Z,1478876333.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:53.584Z,1478876333.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:53.686Z,1478876333.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:54.079Z,1478876334.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:54.383Z,1478876334.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:54.477Z,1478876334.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:54.796Z,1478876334.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:54.887Z,1478876334.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:55.281Z,1478876335.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:55.592Z,1478876335.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:55.698Z,1478876335.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:56.078Z,1478876336.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:56.389Z,1478876336.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:56.481Z,1478876336.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:56.800Z,1478876336.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:56.888Z,1478876336.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:57.305Z,1478876337.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:57.596Z,1478876337.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:57.685Z,1478876337.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:58.089Z,1478876338.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:58.393Z,1478876338.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:58.525Z,1478876338.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:58.804Z,1478876338.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:58.885Z,1478876338.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:59.298Z,1478876339.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:58:59.600Z,1478876339.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:58:59.689Z,1478876339.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:00.113Z,1478876340.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:00.396Z,1478876340.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:00.546Z,1478876340.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:00.883Z,1478876340.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:00.920Z,1478876340.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:01.290Z,1478876341.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:01.676Z,1478876341.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:01.716Z,1478876341.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:02.086Z,1478876342.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:02.479Z,1478876342.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:02.512Z,1478876342.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:02.917Z,1478876342.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:03.252Z,1478876343.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:03.269Z,1478876343.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:03.705Z,1478876343.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:04.048Z,1478876344.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:04.077Z,1478876344.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:04.474Z,1478876344.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:04.845Z,1478876344.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:04.933Z,1478876344.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:05.256Z,1478876345.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:05.294Z,1478876345.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:05.684Z,1478876345.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:06.054Z,1478876346.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:06.086Z,1478876346.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:06.489Z,1478876346.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:06.766Z,1478876346.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:06.884Z,1478876346.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:07.285Z,1478876347.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:07.560Z,1478876347.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:07.689Z,1478876347.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:08.084Z,1478876348.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:08.357Z,1478876348.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:08.493Z,1478876348.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:08.772Z,1478876348.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:08.896Z,1478876348.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:09.300Z,1478876349.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:09.568Z,1478876349.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:09.697Z,1478876349.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:10.093Z,1478876350.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:10.382Z,1478876350.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:10.513Z,1478876350.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:10.800Z,1478876350.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:10.892Z,1478876350.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:11.297Z,1478876351.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:11.596Z,1478876351.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:11.669Z,1478876351.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:12.105Z,1478876352.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:12.392Z,1478876352.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:12.497Z,1478876352.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:12.800Z,1478876352.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:12.881Z,1478876352.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:13.306Z,1478876353.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:13.596Z,1478876353.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:13.677Z,1478876353.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:14.099Z,1478876354.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:14.394Z,1478876354.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:14.550Z,1478876354.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:14.875Z,1478876354.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:14.900Z,1478876354.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:15.278Z,1478876355.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:15.680Z,1478876355.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:15.696Z,1478876355.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:16.081Z,1478876356.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:16.485Z,1478876356.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:16.492Z,1478876356.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:16.895Z,1478876356.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:17.216Z,1478876357.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:17.293Z,1478876357.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:17.673Z,1478876357.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:18.012Z,1478876358.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:18.094Z,1478876358.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:18.496Z,1478876358.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:18.809Z,1478876358.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:18.890Z,1478876358.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:19.220Z,1478876359.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:19.287Z,1478876359.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:19.689Z,1478876359.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:20.016Z,1478876360.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:20.089Z,1478876360.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:20.489Z,1478876360.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:20.744Z,1478876360.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:20.885Z,1478876360.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:21.289Z,1478876361.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:21.540Z,1478876361.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:21.673Z,1478876361.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:22.077Z,1478876362.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:22.337Z,1478876362.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:22.505Z,1478876362.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:22.756Z,1478876362.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:22.880Z,1478876362.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:23.276Z,1478876363.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:23.552Z,1478876363.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:23.680Z,1478876363.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:24.080Z,1478876364.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:24.349Z,1478876364.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:24.482Z,1478876364.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:24.764Z,1478876364.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:24.880Z,1478876364.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:25.313Z,1478876365.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:25.560Z,1478876365.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:25.689Z,1478876365.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:26.357Z,1478876366.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:26.768Z,1478876366.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:27.564Z,1478876367.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:28.360Z,1478876368.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:28.852Z,1478876368.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:29.165Z,1478876369.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:29.301Z,1478876369.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:29.648Z,1478876369.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:29.709Z,1478876369.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:30.122Z,1478876370.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:30.444Z,1478876370.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:30.477Z,1478876370.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:30.894Z,1478876370.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:31.200Z,1478876371.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:31.277Z,1478876371.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:31.718Z,1478876371.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:31.996Z,1478876371.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:32.090Z,1478876372.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:32.485Z,1478876372.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:32.793Z,1478876372.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:32.887Z,1478876372.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:33.204Z,1478876373.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:33.285Z,1478876373.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:33.691Z,1478876373.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:33.000Z,1478876374.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:34.095Z,1478876374.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:34.495Z,1478876374.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:34.720Z,1478876374.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:34.885Z,1478876374.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:35.284Z,1478876375.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:35.516Z,1478876375.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:35.689Z,1478876375.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:36.077Z,1478876376.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:36.313Z,1478876376.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:36.484Z,1478876376.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:36.724Z,1478876376.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:36.879Z,1478876376.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:37.321Z,1478876377.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:37.520Z,1478876377.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:37.678Z,1478876377.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:38.085Z,1478876378.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:38.317Z,1478876378.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:38.485Z,1478876378.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:38.728Z,1478876378.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:38.894Z,1478876378.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:39.287Z,1478876379.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:39.524Z,1478876379.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:39.699Z,1478876379.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:40.094Z,1478876380.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:40.323Z,1478876380.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:40.497Z,1478876380.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:40.736Z,1478876380.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:40.893Z,1478876380.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:41.273Z,1478876381.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:41.534Z,1478876381.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:41.669Z,1478876381.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:42.081Z,1478876382.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:42.328Z,1478876382.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:42.490Z,1478876382.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:42.816Z,1478876382.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:42.885Z,1478876382.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:43.277Z,1478876383.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:43.612Z,1478876383.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:43.683Z,1478876383.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:44.130Z,1478876384.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:44.408Z,1478876384.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:44.493Z,1478876384.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:44.929Z,1478876384.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:45.172Z,1478876385.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:45.290Z,1478876385.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:45.701Z,1478876385.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:45.970Z,1478876385.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:46.108Z,1478876386.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:46.489Z,1478876386.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:46.765Z,1478876386.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:46.887Z,1478876386.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:47.184Z,1478876387.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:47.289Z,1478876387.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:47.696Z,1478876387.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:47.980Z,1478876387.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:48.089Z,1478876388.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:48.477Z,1478876388.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:48.700Z,1478876388.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:48.877Z,1478876388.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:49.287Z,1478876389.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:49.496Z,1478876389.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:49.685Z,1478876389.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:50.082Z,1478876390.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:50.293Z,1478876390.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:50.493Z,1478876390.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:50.704Z,1478876390.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:50.876Z,1478876390.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:51.287Z,1478876391.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:51.500Z,1478876391.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:51.685Z,1478876391.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:52.089Z,1478876392.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:52.308Z,1478876392.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:52.486Z,1478876392.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:52.736Z,1478876392.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:52.889Z,1478876392.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:53.284Z,1478876393.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:53.532Z,1478876393.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:53.689Z,1478876393.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:54.089Z,1478876394.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:54.328Z,1478876394.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:54.498Z,1478876394.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:54.736Z,1478876394.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:54.897Z,1478876394.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:55.297Z,1478876395.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:55.532Z,1478876395.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:55.697Z,1478876395.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:56.089Z,1478876396.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:56.328Z,1478876396.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:56.506Z,1478876396.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:56.820Z,1478876396.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:56.884Z,1478876396.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:57.281Z,1478876397.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:57.616Z,1478876397.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:57.717Z,1478876397.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:58.121Z,1478876398.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:58.414Z,1478876398.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:58.554Z,1478876398.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:58.904Z,1478876398.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:59.152Z,1478876399.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T14:59:59.277Z,1478876399.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:59.714Z,1478876399.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T14:59:59.948Z,1478876399.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:00.117Z,1478876400.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:00.499Z,1478876400.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:00.745Z,1478876400.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:00.886Z,1478876400.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:01.156Z,1478876401.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:01.285Z,1478876401.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:01.677Z,1478876401.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:01.952Z,1478876401.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:02.076Z,1478876402.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:02.477Z,1478876402.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:02.680Z,1478876402.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:02.883Z,1478876402.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:03.281Z,1478876403.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:03.476Z,1478876403.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:03.684Z,1478876403.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:04.085Z,1478876404.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:04.273Z,1478876404.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:04.493Z,1478876404.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:04.684Z,1478876404.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:04.893Z,1478876404.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:05.288Z,1478876405.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:05.480Z,1478876405.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:05.692Z,1478876405.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:06.090Z,1478876406.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:06.277Z,1478876406.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:06.490Z,1478876406.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:06.688Z,1478876406.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:06.886Z,1478876406.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:07.282Z,1478876407.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:07.484Z,1478876407.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:07.676Z,1478876407.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:08.081Z,1478876408.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:08.281Z,1478876408.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:08.485Z,1478876408.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:08.692Z,1478876408.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:08.885Z,1478876408.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:09.277Z,1478876409.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:09.488Z,1478876409.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:09.679Z,1478876409.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:10.093Z,1478876410.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:10.284Z,1478876410.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:10.491Z,1478876410.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:10.796Z,1478876410.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:10.891Z,1478876410.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:11.297Z,1478876411.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:11.592Z,1478876411.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:11.690Z,1478876411.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:12.125Z,1478876412.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:12.388Z,1478876412.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:12.494Z,1478876412.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:12.868Z,1478876412.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:13.132Z,1478876413.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:13.305Z,1478876413.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:13.693Z,1478876413.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:13.928Z,1478876413.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:14.110Z,1478876414.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:14.513Z,1478876414.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:14.725Z,1478876414.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:14.901Z,1478876414.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:15.136Z,1478876415.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:15.282Z,1478876415.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:15.685Z,1478876415.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:15.933Z,1478876415.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:16.075Z,1478876416.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:16.489Z,1478876416.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:16.656Z,1478876416.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:16.885Z,1478876416.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:17.281Z,1478876417.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:17.454Z,1478876417.454 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:17.676Z,1478876417.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:18.086Z,1478876418.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:18.249Z,1478876418.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:18.484Z,1478876418.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:18.664Z,1478876418.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:18.885Z,1478876418.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:19.278Z,1478876419.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:19.460Z,1478876419.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:19.685Z,1478876419.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:20.085Z,1478876420.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:20.269Z,1478876420.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:20.484Z,1478876420.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:20.684Z,1478876420.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:20.885Z,1478876420.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:21.288Z,1478876421.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:21.480Z,1478876421.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:21.685Z,1478876421.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:22.081Z,1478876422.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:22.276Z,1478876422.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:22.488Z,1478876422.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:22.684Z,1478876422.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:22.884Z,1478876422.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:23.281Z,1478876423.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:23.480Z,1478876423.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:23.701Z,1478876423.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:24.088Z,1478876424.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:24.097Z,1478876424.097 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T14:55:23.8Z
2016-11-11T15:00:24.097Z,1478876424.097 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T15:00:24.097Z,1478876424.097 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T15:00:24.276Z,1478876424.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:24.468Z,1478876424.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:24.752Z,1478876424.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:25.349Z,1478876425.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:25.488Z,1478876425.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:25.548Z,1478876425.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:26.344Z,1478876426.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:27.112Z,1478876427.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:27.908Z,1478876427.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:28.705Z,1478876428.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:29.097Z,1478876429.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:29.500Z,1478876429.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:29.590Z,1478876429.590 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0236.lzma
2016-11-11T15:00:29.683Z,1478876429.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:29.816Z,1478876429.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:30.012Z,1478876430.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:30.133Z,1478876430.134 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0236.lzma.bak
2016-11-11T15:00:30.134Z,1478876430.134 [DataOverHttps](INFO): SBD MOMSN=4555508
2016-11-11T15:00:30.269Z,1478876430.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:30.628Z,1478876430.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:31.424Z,1478876431.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:31.473Z,1478876431.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:31.633Z,1478876431.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:32.221Z,1478876432.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:32.649Z,1478876432.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:33.444Z,1478876433.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:34.241Z,1478876434.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:34.656Z,1478876434.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:35.125Z,1478876435.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:35.269Z,1478876435.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:35.454Z,1478876435.454 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:35.617Z,1478876435.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:36.032Z,1478876436.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:36.248Z,1478876436.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:36.425Z,1478876436.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:36.656Z,1478876436.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:36.802Z,1478876436.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:37.452Z,1478876437.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:38.248Z,1478876438.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:38.716Z,1478876438.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:39.512Z,1478876439.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:40.253Z,1478876440.253 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T15:00:40.300Z,1478876440.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:40.308Z,1478876440.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:40.359Z,1478876440.359 [DataOverHttps](INFO): Sending 237 bytes from file Logs/20161111T044527/Express0237.lzma
2016-11-11T15:00:40.449Z,1478876440.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:40.830Z,1478876440.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:41.072Z,1478876441.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:41.145Z,1478876441.145 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0237.lzma.bak
2016-11-11T15:00:41.145Z,1478876441.145 [DataOverHttps](INFO): SBD MOMSN=4555510
2016-11-11T15:00:41.209Z,1478876441.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:41.868Z,1478876441.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:42.477Z,1478876442.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:42.486Z,1478876442.486 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T15:00:42.486Z,1478876442.486 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T15:00:42.486Z,1478876442.486 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T15:00:42.596Z,1478876442.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:42.664Z,1478876442.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:43.100Z,1478876443.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:43.896Z,1478876443.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:44.612Z,1478876444.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:45.408Z,1478876445.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:46.205Z,1478876446.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:46.362Z,1478876446.362 [NAL9602](INFO): Powering down
2016-11-11T15:00:46.429Z,1478876446.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:46.560Z,1478876446.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:46.616Z,1478876446.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:46.937Z,1478876446.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:47.404Z,1478876447.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:47.412Z,1478876447.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:47.731Z,1478876447.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:48.146Z,1478876448.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:48.209Z,1478876448.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:48.519Z,1478876448.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:48.624Z,1478876448.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:48.953Z,1478876448.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:49.361Z,1478876449.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:49.420Z,1478876449.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:49.724Z,1478876449.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:50.134Z,1478876450.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:50.216Z,1478876450.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:50.544Z,1478876450.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:50.624Z,1478876450.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:50.924Z,1478876450.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:51.322Z,1478876451.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:51.420Z,1478876451.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:51.733Z,1478876451.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:52.155Z,1478876452.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:52.216Z,1478876452.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:52.530Z,1478876452.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:52.692Z,1478876452.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:52.925Z,1478876452.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:53.333Z,1478876453.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:53.488Z,1478876453.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:53.741Z,1478876453.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:54.126Z,1478876454.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:54.284Z,1478876454.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:54.528Z,1478876454.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:54.925Z,1478876454.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:55.044Z,1478876455.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:55.345Z,1478876455.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:55.713Z,1478876455.713 [PNI_TCM](ERROR): CRC does not match. Expected:0x63050 got:0x21689
2016-11-11T15:00:55.734Z,1478876455.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:55.840Z,1478876455.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:56.118Z,1478876456.118 [PNI_TCM](ERROR): CRC does not match. Expected:0x30712 got:0x4615
2016-11-11T15:00:56.145Z,1478876456.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:56.549Z,1478876456.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:56.637Z,1478876456.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:56.945Z,1478876456.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:57.076Z,1478876457.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:57.319Z,1478876457.319 [PNI_TCM](ERROR): CRC does not match. Expected:0x58815 got:0x1563
2016-11-11T15:00:57.345Z,1478876457.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:57.733Z,1478876457.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:57.872Z,1478876457.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:58.128Z,1478876458.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:58.536Z,1478876458.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:58.580Z,1478876458.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:58.942Z,1478876458.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:59.321Z,1478876459.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:00:59.376Z,1478876459.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:00:59.724Z,1478876459.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:00.173Z,1478876460.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:00.202Z,1478876460.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:00.516Z,1478876460.516 [PNI_TCM](ERROR): CRC does not match. Expected:0x49299 got:0x59136
2016-11-11T15:01:00.560Z,1478876460.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:00.584Z,1478876460.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:00.926Z,1478876460.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:01.380Z,1478876461.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:01.386Z,1478876461.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:01.729Z,1478876461.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:02.169Z,1478876462.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:02.176Z,1478876462.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:02.530Z,1478876462.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:02.588Z,1478876462.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:02.955Z,1478876462.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:03.371Z,1478876463.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:03.384Z,1478876463.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:03.721Z,1478876463.721 [PNI_TCM](ERROR): CRC does not match. Expected:0x54967 got:0x7361
2016-11-11T15:01:03.749Z,1478876463.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:04.170Z,1478876464.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:04.181Z,1478876464.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:04.527Z,1478876464.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:04.592Z,1478876464.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:04.937Z,1478876464.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:05.333Z,1478876465.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:05.388Z,1478876465.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:05.733Z,1478876465.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:06.133Z,1478876466.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:06.184Z,1478876466.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:06.528Z,1478876466.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:06.684Z,1478876466.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:06.927Z,1478876466.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:07.333Z,1478876467.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:07.480Z,1478876467.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:07.734Z,1478876467.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:08.134Z,1478876468.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:08.276Z,1478876468.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:08.530Z,1478876468.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:08.921Z,1478876468.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:09.032Z,1478876469.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:09.323Z,1478876469.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:09.737Z,1478876469.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:09.828Z,1478876469.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:10.125Z,1478876470.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:10.523Z,1478876470.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:10.625Z,1478876470.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:10.934Z,1478876470.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:11.036Z,1478876471.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:11.341Z,1478876471.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:11.718Z,1478876471.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:11.832Z,1478876471.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:12.193Z,1478876472.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:12.533Z,1478876472.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:12.556Z,1478876472.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:12.929Z,1478876472.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:13.333Z,1478876473.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:13.352Z,1478876473.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:13.729Z,1478876473.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:14.149Z,1478876474.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:14.188Z,1478876474.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:14.544Z,1478876474.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:14.564Z,1478876474.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:14.948Z,1478876474.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:15.349Z,1478876475.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:15.360Z,1478876475.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:15.769Z,1478876475.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:16.156Z,1478876476.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:16.200Z,1478876476.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:16.558Z,1478876476.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:16.568Z,1478876476.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:16.927Z,1478876476.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:17.358Z,1478876477.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:17.364Z,1478876477.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:17.762Z,1478876477.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:18.161Z,1478876478.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:18.190Z,1478876478.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:18.529Z,1478876478.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:18.572Z,1478876478.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:18.929Z,1478876478.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:19.326Z,1478876479.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:19.368Z,1478876479.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:19.727Z,1478876479.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:20.126Z,1478876480.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:20.164Z,1478876480.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:20.545Z,1478876480.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:20.644Z,1478876480.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:20.922Z,1478876480.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:21.316Z,1478876481.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:21.440Z,1478876481.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:21.729Z,1478876481.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:22.129Z,1478876482.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:22.236Z,1478876482.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:22.525Z,1478876482.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:22.934Z,1478876482.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:23.008Z,1478876483.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:23.344Z,1478876483.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:23.737Z,1478876483.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:23.804Z,1478876483.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:24.142Z,1478876484.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:24.521Z,1478876484.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:24.600Z,1478876484.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:24.933Z,1478876484.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:25.013Z,1478876485.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:25.334Z,1478876485.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:25.734Z,1478876485.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:25.808Z,1478876485.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:26.207Z,1478876486.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:26.545Z,1478876486.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:26.560Z,1478876486.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:26.924Z,1478876486.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:27.318Z,1478876487.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:27.356Z,1478876487.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:27.724Z,1478876487.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:28.153Z,1478876488.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:28.185Z,1478876488.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:28.549Z,1478876488.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:28.572Z,1478876488.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:28.930Z,1478876488.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:29.322Z,1478876489.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:29.368Z,1478876489.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:29.773Z,1478876489.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:30.164Z,1478876490.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:30.225Z,1478876490.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:30.560Z,1478876490.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:30.572Z,1478876490.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:30.954Z,1478876490.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:31.321Z,1478876491.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:31.368Z,1478876491.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:31.749Z,1478876491.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:32.164Z,1478876492.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:32.234Z,1478876492.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:32.543Z,1478876492.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:32.572Z,1478876492.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:32.945Z,1478876492.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:33.340Z,1478876493.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:33.368Z,1478876493.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:33.723Z,1478876493.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:34.119Z,1478876494.119 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:34.120Z,1478876494.120 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 184
2016-11-11T15:01:34.120Z,1478876494.120 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:01:34.126Z,1478876494.126 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:34.126Z,1478876494.126 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 184
2016-11-11T15:01:34.126Z,1478876494.126 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:01:34.128Z,1478876494.128 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:34.128Z,1478876494.128 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 184
2016-11-11T15:01:34.128Z,1478876494.128 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:01:34.164Z,1478876494.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:34.172Z,1478876494.172 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:01:34.172Z,1478876494.172 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:01:34.173Z,1478876494.173 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:01:34.542Z,1478876494.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:01:34.542Z,1478876494.542 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 184
2016-11-11T15:01:34.543Z,1478876494.543 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:01:34.543Z,1478876494.543 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 184
2016-11-11T15:01:34.544Z,1478876494.544 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:01:34.544Z,1478876494.544 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 184
2016-11-11T15:01:34.632Z,1478876494.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:34.953Z,1478876494.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:01:34.953Z,1478876494.953 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:01:34.954Z,1478876494.954 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:01:34.967Z,1478876494.967 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:01:34.968Z,1478876494.968 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:01:34.968Z,1478876494.968 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:01:34.969Z,1478876494.968 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:01:34.969Z,1478876494.969 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:01:34.969Z,1478876494.969 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:01:35.343Z,1478876495.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:35.428Z,1478876495.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:35.742Z,1478876495.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:36.121Z,1478876496.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:36.224Z,1478876496.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:36.525Z,1478876496.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:36.941Z,1478876496.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:36.980Z,1478876496.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:37.321Z,1478876497.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:37.721Z,1478876497.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:37.776Z,1478876497.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:38.116Z,1478876498.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:38.515Z,1478876498.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:38.572Z,1478876498.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:38.922Z,1478876498.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:38.984Z,1478876498.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:39.387Z,1478876499.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:39.722Z,1478876499.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:39.780Z,1478876499.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:40.178Z,1478876500.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:40.526Z,1478876500.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:40.540Z,1478876500.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:40.933Z,1478876500.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:41.336Z,1478876501.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:41.338Z,1478876501.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:41.726Z,1478876501.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:42.132Z,1478876502.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:42.196Z,1478876502.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:42.540Z,1478876502.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:42.541Z,1478876502.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:42.917Z,1478876502.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:43.336Z,1478876503.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:44.132Z,1478876504.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:44.540Z,1478876504.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:45.336Z,1478876505.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:46.132Z,1478876506.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:46.540Z,1478876506.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:46.710Z,1478876506.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:46.842Z,1478876506.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:47.221Z,1478876507.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:47.336Z,1478876507.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:47.654Z,1478876507.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:48.057Z,1478876508.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:48.132Z,1478876508.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:48.454Z,1478876508.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:48.604Z,1478876508.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:48.854Z,1478876508.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:49.226Z,1478876509.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:49.400Z,1478876509.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:49.657Z,1478876509.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:50.024Z,1478876510.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:50.198Z,1478876510.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:50.419Z,1478876510.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:50.826Z,1478876510.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:50.952Z,1478876510.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:51.217Z,1478876511.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:51.618Z,1478876511.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:51.750Z,1478876511.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:52.025Z,1478876512.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:52.425Z,1478876512.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:52.545Z,1478876512.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:52.803Z,1478876512.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:52.958Z,1478876512.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:53.229Z,1478876513.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:53.632Z,1478876513.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:53.752Z,1478876513.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:54.006Z,1478876514.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:54.421Z,1478876514.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:54.484Z,1478876514.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:54.820Z,1478876514.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:55.220Z,1478876515.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:55.280Z,1478876515.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:55.615Z,1478876515.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:56.019Z,1478876516.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:56.076Z,1478876516.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:56.418Z,1478876516.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:56.488Z,1478876516.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:56.813Z,1478876516.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:57.218Z,1478876517.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:57.284Z,1478876517.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:57.628Z,1478876517.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:58.027Z,1478876518.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:58.080Z,1478876518.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:58.424Z,1478876518.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:58.492Z,1478876518.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:58.824Z,1478876518.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:59.226Z,1478876519.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:01:59.288Z,1478876519.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:01:59.630Z,1478876519.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:00.018Z,1478876520.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:00.084Z,1478876520.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:00.434Z,1478876520.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:00.496Z,1478876520.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:00.889Z,1478876520.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:01.262Z,1478876521.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:01.292Z,1478876521.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:01.621Z,1478876521.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:02.049Z,1478876522.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:02.100Z,1478876522.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:02.433Z,1478876522.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:02.572Z,1478876522.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:02.860Z,1478876522.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:03.252Z,1478876523.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:03.368Z,1478876523.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:03.620Z,1478876523.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:04.023Z,1478876524.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:04.164Z,1478876524.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:04.442Z,1478876524.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:04.814Z,1478876524.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:04.952Z,1478876524.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:05.227Z,1478876525.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:05.653Z,1478876525.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:05.748Z,1478876525.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:06.029Z,1478876526.029 [PNI_TCM](ERROR): CRC does not match. Expected:0x46363 got:0x11527
2016-11-11T15:02:06.069Z,1478876526.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:06.425Z,1478876526.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:06.545Z,1478876526.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:06.813Z,1478876526.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:06.956Z,1478876526.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:07.237Z,1478876527.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:07.604Z,1478876527.604 [PNI_TCM](ERROR): CRC does not match. Expected:0x9515 got:0x40338
2016-11-11T15:02:07.622Z,1478876527.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:07.752Z,1478876527.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:08.070Z,1478876528.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:08.433Z,1478876528.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:08.468Z,1478876528.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:08.823Z,1478876528.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:09.206Z,1478876529.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:09.264Z,1478876529.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:09.613Z,1478876529.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:10.058Z,1478876530.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:10.060Z,1478876530.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:10.414Z,1478876530.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:10.472Z,1478876530.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:10.817Z,1478876530.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:11.220Z,1478876531.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:11.268Z,1478876531.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:11.617Z,1478876531.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:12.051Z,1478876532.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:12.064Z,1478876532.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:12.405Z,1478876532.405 [PNI_TCM](ERROR): CRC does not match. Expected:0x1303 got:0x49579
2016-11-11T15:02:12.433Z,1478876532.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:12.476Z,1478876532.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:12.825Z,1478876532.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:13.220Z,1478876533.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:13.272Z,1478876533.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:13.629Z,1478876533.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:14.069Z,1478876534.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:14.096Z,1478876534.096 [PNI_TCM](ERROR): CRC does not match. Expected:0x37702 got:0x6978
2016-11-11T15:02:14.149Z,1478876534.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:14.424Z,1478876534.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:14.484Z,1478876534.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:14.829Z,1478876534.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:15.229Z,1478876535.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:15.280Z,1478876535.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:15.690Z,1478876535.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:16.043Z,1478876536.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:16.076Z,1478876536.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:16.441Z,1478876536.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:16.548Z,1478876536.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:16.846Z,1478876536.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:17.261Z,1478876537.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:17.344Z,1478876537.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:17.660Z,1478876537.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:18.014Z,1478876538.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:18.140Z,1478876538.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:18.425Z,1478876538.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:18.820Z,1478876538.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:18.916Z,1478876538.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:19.230Z,1478876539.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:19.655Z,1478876539.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:19.720Z,1478876539.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:20.041Z,1478876540.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:20.477Z,1478876540.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:20.516Z,1478876540.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:20.867Z,1478876540.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:21.080Z,1478876541.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:21.218Z,1478876541.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:21.622Z,1478876541.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:21.876Z,1478876541.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:22.072Z,1478876542.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:22.421Z,1478876542.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:22.452Z,1478876542.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:22.845Z,1478876542.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:23.205Z,1478876543.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:23.248Z,1478876543.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:23.608Z,1478876543.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:24.045Z,1478876544.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:24.102Z,1478876544.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:24.440Z,1478876544.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:24.476Z,1478876544.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:24.841Z,1478876544.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:25.213Z,1478876545.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:25.272Z,1478876545.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:25.632Z,1478876545.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:26.068Z,1478876546.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:26.102Z,1478876546.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:26.441Z,1478876546.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:26.476Z,1478876546.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:26.849Z,1478876546.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:27.237Z,1478876547.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:27.272Z,1478876547.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:27.660Z,1478876547.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:28.060Z,1478876548.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:28.068Z,1478876548.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:28.470Z,1478876548.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:28.476Z,1478876548.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:28.802Z,1478876548.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:29.242Z,1478876549.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:29.272Z,1478876549.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:29.655Z,1478876549.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:30.019Z,1478876550.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:30.068Z,1478876550.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:30.425Z,1478876550.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:30.536Z,1478876550.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:30.855Z,1478876550.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:31.218Z,1478876551.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:31.344Z,1478876551.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:31.637Z,1478876551.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:32.038Z,1478876552.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:32.140Z,1478876552.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:32.434Z,1478876552.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:32.825Z,1478876552.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:32.884Z,1478876552.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:33.242Z,1478876553.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:33.617Z,1478876553.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:33.680Z,1478876553.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:34.029Z,1478876554.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:34.430Z,1478876554.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:34.477Z,1478876554.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:34.825Z,1478876554.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:34.888Z,1478876554.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:35.234Z,1478876555.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:35.614Z,1478876555.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:35.684Z,1478876555.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:36.086Z,1478876556.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:36.433Z,1478876556.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:36.452Z,1478876556.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:36.834Z,1478876556.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:37.214Z,1478876557.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:37.248Z,1478876557.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:37.621Z,1478876557.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:38.044Z,1478876558.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:38.078Z,1478876558.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:38.422Z,1478876558.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:38.452Z,1478876558.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:38.846Z,1478876558.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:39.221Z,1478876559.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:39.249Z,1478876559.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:39.622Z,1478876559.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:40.044Z,1478876560.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:40.121Z,1478876560.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:40.433Z,1478876560.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:40.452Z,1478876560.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:40.830Z,1478876560.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:41.217Z,1478876561.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:41.248Z,1478876561.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:41.621Z,1478876561.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:42.044Z,1478876562.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:42.068Z,1478876562.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:42.430Z,1478876562.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:42.452Z,1478876562.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:42.869Z,1478876562.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:43.248Z,1478876563.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:43.251Z,1478876563.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:44.044Z,1478876564.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:44.504Z,1478876564.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:45.300Z,1478876565.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:46.096Z,1478876566.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:46.864Z,1478876566.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:46.890Z,1478876566.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:47.030Z,1478876567.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:47.406Z,1478876567.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:47.660Z,1478876567.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:47.805Z,1478876567.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:48.204Z,1478876568.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:48.457Z,1478876568.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:48.638Z,1478876568.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:48.868Z,1478876568.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:49.003Z,1478876569.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:49.445Z,1478876569.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:49.664Z,1478876569.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:49.822Z,1478876569.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:50.199Z,1478876570.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:50.392Z,1478876570.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:50.604Z,1478876570.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:51.010Z,1478876571.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:51.188Z,1478876571.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:51.389Z,1478876571.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:51.789Z,1478876571.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:51.985Z,1478876571.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:52.218Z,1478876572.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:52.396Z,1478876572.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:52.595Z,1478876572.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:52.996Z,1478876572.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:53.192Z,1478876573.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:53.396Z,1478876573.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:53.802Z,1478876573.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:53.997Z,1478876573.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:54.200Z,1478876574.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:54.416Z,1478876574.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:54.609Z,1478876574.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:54.998Z,1478876574.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:55.212Z,1478876575.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:55.395Z,1478876575.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:55.804Z,1478876575.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:56.008Z,1478876576.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:56.226Z,1478876576.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:56.416Z,1478876576.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:56.608Z,1478876576.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:57.005Z,1478876577.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:57.212Z,1478876577.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:57.405Z,1478876577.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:57.808Z,1478876577.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:58.008Z,1478876578.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:58.209Z,1478876578.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:58.480Z,1478876578.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:58.608Z,1478876578.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:59.008Z,1478876579.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:59.276Z,1478876579.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:02:59.407Z,1478876579.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:02:59.808Z,1478876579.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:00.072Z,1478876580.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:00.229Z,1478876580.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:00.614Z,1478876580.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:00.840Z,1478876580.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:01.012Z,1478876581.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:01.387Z,1478876581.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:01.636Z,1478876581.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:01.841Z,1478876581.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:02.210Z,1478876582.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:02.433Z,1478876582.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:02.625Z,1478876582.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:02.844Z,1478876582.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:03.002Z,1478876583.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:03.430Z,1478876583.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:03.640Z,1478876583.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:03.837Z,1478876583.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:04.194Z,1478876584.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:04.370Z,1478876584.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:04.605Z,1478876584.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:05.014Z,1478876585.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:05.164Z,1478876585.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:05.405Z,1478876585.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:05.797Z,1478876585.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:05.961Z,1478876585.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:06.204Z,1478876586.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:06.372Z,1478876586.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:06.604Z,1478876586.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:07.002Z,1478876587.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:07.168Z,1478876587.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:07.405Z,1478876587.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:07.810Z,1478876587.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:07.965Z,1478876587.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:08.213Z,1478876588.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:08.376Z,1478876588.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:08.608Z,1478876588.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:09.007Z,1478876589.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:09.172Z,1478876589.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:09.428Z,1478876589.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:09.804Z,1478876589.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:09.969Z,1478876589.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:10.215Z,1478876590.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:10.380Z,1478876590.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:10.594Z,1478876590.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:11.005Z,1478876591.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:11.176Z,1478876591.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:11.402Z,1478876591.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:11.801Z,1478876591.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:11.972Z,1478876591.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:12.201Z,1478876592.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:12.476Z,1478876592.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:12.603Z,1478876592.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:13.009Z,1478876593.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:13.272Z,1478876593.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:13.405Z,1478876593.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:13.809Z,1478876593.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:14.068Z,1478876594.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:14.198Z,1478876594.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:14.641Z,1478876594.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:14.816Z,1478876594.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:15.008Z,1478876595.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:15.408Z,1478876595.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:15.612Z,1478876595.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:15.829Z,1478876595.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:16.214Z,1478876596.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:16.409Z,1478876596.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:16.612Z,1478876596.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:16.820Z,1478876596.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:17.025Z,1478876597.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:17.393Z,1478876597.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:17.616Z,1478876597.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:17.826Z,1478876597.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:18.261Z,1478876598.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:18.344Z,1478876598.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:18.592Z,1478876598.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:19.016Z,1478876599.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:19.140Z,1478876599.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:19.392Z,1478876599.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:19.801Z,1478876599.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:19.937Z,1478876599.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:20.201Z,1478876600.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:20.352Z,1478876600.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:20.596Z,1478876600.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:21.001Z,1478876601.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:21.148Z,1478876601.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:21.401Z,1478876601.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:21.800Z,1478876601.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:21.952Z,1478876601.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:22.207Z,1478876602.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:22.368Z,1478876602.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:22.606Z,1478876602.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:23.005Z,1478876603.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:23.164Z,1478876603.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:23.407Z,1478876603.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:23.817Z,1478876603.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:23.961Z,1478876603.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:24.218Z,1478876604.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:24.372Z,1478876604.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:24.593Z,1478876604.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:24.993Z,1478876604.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:25.168Z,1478876605.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:25.397Z,1478876605.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:25.801Z,1478876605.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:25.966Z,1478876605.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:26.201Z,1478876606.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:26.452Z,1478876606.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:26.605Z,1478876606.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:27.007Z,1478876607.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:27.248Z,1478876607.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:27.408Z,1478876607.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:27.797Z,1478876607.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:28.044Z,1478876608.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:28.198Z,1478876608.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:28.607Z,1478876608.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:28.792Z,1478876608.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:29.049Z,1478876609.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:29.388Z,1478876609.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:29.588Z,1478876609.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:29.817Z,1478876609.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:30.225Z,1478876610.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:30.385Z,1478876610.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:30.601Z,1478876610.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:30.796Z,1478876610.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:31.026Z,1478876611.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:31.410Z,1478876611.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:31.592Z,1478876611.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:31.826Z,1478876611.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:32.197Z,1478876612.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:32.336Z,1478876612.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:32.625Z,1478876612.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:33.007Z,1478876613.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:33.132Z,1478876613.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:33.408Z,1478876613.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:33.805Z,1478876613.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:33.929Z,1478876613.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:34.204Z,1478876614.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:34.344Z,1478876614.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:34.608Z,1478876614.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:35.004Z,1478876615.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:35.140Z,1478876615.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:35.414Z,1478876615.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:35.788Z,1478876615.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:35.937Z,1478876615.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:36.193Z,1478876616.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:36.352Z,1478876616.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:36.603Z,1478876616.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:36.992Z,1478876616.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:37.148Z,1478876617.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:37.394Z,1478876617.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:37.801Z,1478876617.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:37.944Z,1478876617.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:38.201Z,1478876618.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:38.352Z,1478876618.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:38.595Z,1478876618.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:39.004Z,1478876619.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:39.148Z,1478876619.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:39.398Z,1478876619.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:39.798Z,1478876619.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:39.944Z,1478876619.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:40.213Z,1478876620.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:40.420Z,1478876620.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:40.608Z,1478876620.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:41.009Z,1478876621.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:41.216Z,1478876621.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:41.409Z,1478876621.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:41.817Z,1478876621.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:42.012Z,1478876622.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:42.213Z,1478876622.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:42.613Z,1478876622.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:42.776Z,1478876622.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:43.005Z,1478876623.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:43.439Z,1478876623.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:43.572Z,1478876623.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:44.369Z,1478876624.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:44.788Z,1478876624.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:45.584Z,1478876625.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:46.300Z,1478876626.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:46.962Z,1478876626.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:47.087Z,1478876627.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:47.096Z,1478876627.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:47.466Z,1478876627.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:47.892Z,1478876627.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:47.941Z,1478876627.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:48.285Z,1478876628.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:48.304Z,1478876628.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:48.709Z,1478876628.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:49.098Z,1478876629.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:49.100Z,1478876629.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:49.466Z,1478876629.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:49.896Z,1478876629.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:49.942Z,1478876629.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:50.275Z,1478876630.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:50.312Z,1478876630.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:50.670Z,1478876630.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:51.086Z,1478876631.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:51.108Z,1478876631.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:51.470Z,1478876631.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:51.905Z,1478876631.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:51.933Z,1478876631.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:52.268Z,1478876632.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:52.316Z,1478876632.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:52.688Z,1478876632.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:53.067Z,1478876633.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:53.112Z,1478876633.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:53.477Z,1478876633.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:53.881Z,1478876633.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:53.908Z,1478876633.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:54.277Z,1478876634.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:54.396Z,1478876634.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:54.686Z,1478876634.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:55.088Z,1478876635.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:55.192Z,1478876635.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:55.460Z,1478876635.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:55.865Z,1478876635.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:55.988Z,1478876635.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:56.263Z,1478876636.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:56.677Z,1478876636.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:56.760Z,1478876636.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:57.078Z,1478876637.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:57.474Z,1478876637.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:57.557Z,1478876637.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:57.877Z,1478876637.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:58.277Z,1478876638.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:58.353Z,1478876638.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:58.665Z,1478876638.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:58.764Z,1478876638.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:59.067Z,1478876639.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:59.468Z,1478876639.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:03:59.560Z,1478876639.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:03:59.974Z,1478876639.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:00.266Z,1478876640.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:00.308Z,1478876640.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:00.670Z,1478876640.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:01.073Z,1478876641.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:01.104Z,1478876641.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:01.510Z,1478876641.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:01.900Z,1478876641.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:01.940Z,1478876641.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:02.264Z,1478876642.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:02.312Z,1478876642.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:02.701Z,1478876642.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:03.073Z,1478876643.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:03.108Z,1478876643.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:03.502Z,1478876643.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:03.904Z,1478876643.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:03.949Z,1478876643.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:04.268Z,1478876644.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:04.328Z,1478876644.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:04.675Z,1478876644.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:05.071Z,1478876645.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:05.124Z,1478876645.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:05.481Z,1478876645.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:05.916Z,1478876645.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:05.920Z,1478876645.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:06.276Z,1478876646.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:06.328Z,1478876646.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:06.676Z,1478876646.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:07.080Z,1478876647.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:07.124Z,1478876647.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:07.476Z,1478876647.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:07.879Z,1478876647.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:07.920Z,1478876647.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:08.265Z,1478876648.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:08.376Z,1478876648.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:08.660Z,1478876648.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:09.069Z,1478876649.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:09.172Z,1478876649.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:09.469Z,1478876649.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:09.868Z,1478876649.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:09.968Z,1478876649.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:10.273Z,1478876650.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:10.677Z,1478876650.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:10.744Z,1478876650.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:11.077Z,1478876651.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:11.475Z,1478876651.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:11.540Z,1478876651.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:11.870Z,1478876651.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:12.277Z,1478876652.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:12.336Z,1478876652.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:12.682Z,1478876652.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:12.748Z,1478876652.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:13.088Z,1478876653.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:13.481Z,1478876653.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:13.544Z,1478876653.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:13.938Z,1478876653.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:14.266Z,1478876654.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:14.304Z,1478876654.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:14.702Z,1478876654.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:15.068Z,1478876655.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:15.100Z,1478876655.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:15.474Z,1478876655.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:15.896Z,1478876655.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:15.950Z,1478876655.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:16.278Z,1478876656.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:16.312Z,1478876656.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:16.678Z,1478876656.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:17.101Z,1478876657.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:17.108Z,1478876657.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:17.479Z,1478876657.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:17.904Z,1478876657.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:17.929Z,1478876657.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:18.297Z,1478876658.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:18.320Z,1478876658.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:18.687Z,1478876658.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:19.087Z,1478876659.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:19.140Z,1478876659.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:19.460Z,1478876659.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:19.907Z,1478876659.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:19.936Z,1478876659.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:20.265Z,1478876660.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:20.344Z,1478876660.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:20.666Z,1478876660.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:21.065Z,1478876661.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:21.140Z,1478876661.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:21.467Z,1478876661.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:21.867Z,1478876661.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:21.937Z,1478876661.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:22.275Z,1478876662.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:22.364Z,1478876662.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:22.674Z,1478876662.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:23.068Z,1478876663.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:23.160Z,1478876663.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:23.473Z,1478876663.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:23.873Z,1478876663.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:23.956Z,1478876663.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:24.267Z,1478876664.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:24.679Z,1478876664.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:24.736Z,1478876664.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:25.072Z,1478876665.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:25.481Z,1478876665.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:25.532Z,1478876665.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:25.865Z,1478876665.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:26.264Z,1478876666.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:26.328Z,1478876666.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:26.671Z,1478876666.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:26.740Z,1478876666.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:27.069Z,1478876667.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:27.467Z,1478876667.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:27.536Z,1478876667.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:27.929Z,1478876667.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:28.260Z,1478876668.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:28.283Z,1478876668.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:28.685Z,1478876668.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:29.056Z,1478876669.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:29.073Z,1478876669.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:29.486Z,1478876669.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:29.860Z,1478876669.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:29.902Z,1478876669.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:30.284Z,1478876670.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:30.301Z,1478876670.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:30.686Z,1478876670.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:31.080Z,1478876671.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:31.101Z,1478876671.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:31.480Z,1478876671.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:31.876Z,1478876671.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:31.945Z,1478876671.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:32.284Z,1478876672.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:32.317Z,1478876672.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:32.667Z,1478876672.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:33.067Z,1478876673.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:33.088Z,1478876673.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:33.468Z,1478876673.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:33.884Z,1478876673.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:33.904Z,1478876673.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:34.277Z,1478876674.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:34.292Z,1478876674.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:34.677Z,1478876674.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:35.070Z,1478876675.070 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:35.070Z,1478876675.070 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 185
2016-11-11T15:04:35.070Z,1478876675.070 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:04:35.076Z,1478876675.076 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:35.077Z,1478876675.077 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 185
2016-11-11T15:04:35.077Z,1478876675.077 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:04:35.079Z,1478876675.079 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:35.079Z,1478876675.079 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 185
2016-11-11T15:04:35.079Z,1478876675.079 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:04:35.088Z,1478876675.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:35.094Z,1478876675.095 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:04:35.095Z,1478876675.095 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:04:35.095Z,1478876675.095 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:04:35.491Z,1478876675.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:04:35.491Z,1478876675.491 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 185
2016-11-11T15:04:35.492Z,1478876675.492 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:04:35.492Z,1478876675.492 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 185
2016-11-11T15:04:35.493Z,1478876675.493 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:04:35.493Z,1478876675.493 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 185
2016-11-11T15:04:35.875Z,1478876675.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:04:35.875Z,1478876675.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:04:35.876Z,1478876675.876 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:04:35.880Z,1478876675.880 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:04:35.881Z,1478876675.881 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:04:35.881Z,1478876675.881 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:04:35.882Z,1478876675.882 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:04:35.882Z,1478876675.882 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:04:35.882Z,1478876675.882 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:04:35.884Z,1478876675.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:36.265Z,1478876676.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:36.348Z,1478876676.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:36.665Z,1478876676.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:37.068Z,1478876677.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:37.144Z,1478876677.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:37.505Z,1478876677.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:37.873Z,1478876677.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:37.940Z,1478876677.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:38.327Z,1478876678.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:38.665Z,1478876678.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:38.700Z,1478876678.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:39.063Z,1478876679.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:39.468Z,1478876679.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:39.496Z,1478876679.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:39.873Z,1478876679.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:40.292Z,1478876680.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:40.325Z,1478876680.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:40.676Z,1478876680.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:40.720Z,1478876680.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:41.070Z,1478876681.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:41.473Z,1478876681.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:41.516Z,1478876681.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:41.908Z,1478876681.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:42.228Z,1478876682.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:42.265Z,1478876682.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:42.663Z,1478876682.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:43.024Z,1478876683.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:43.073Z,1478876683.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:43.468Z,1478876683.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:43.840Z,1478876683.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:44.256Z,1478876684.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:45.052Z,1478876685.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:45.848Z,1478876685.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:46.256Z,1478876686.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:47.052Z,1478876687.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:47.129Z,1478876687.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:47.257Z,1478876687.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:47.625Z,1478876687.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:47.848Z,1478876687.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:48.062Z,1478876688.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:48.256Z,1478876688.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:48.423Z,1478876688.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:48.857Z,1478876688.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:49.052Z,1478876689.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:49.261Z,1478876689.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:49.623Z,1478876689.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:49.848Z,1478876689.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:50.031Z,1478876690.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:50.324Z,1478876690.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:50.437Z,1478876690.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:50.826Z,1478876690.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:51.120Z,1478876691.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:51.240Z,1478876691.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:51.633Z,1478876691.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:51.916Z,1478876691.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:52.027Z,1478876692.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:52.429Z,1478876692.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:52.672Z,1478876692.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:52.833Z,1478876692.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:53.226Z,1478876693.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:53.468Z,1478876693.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:53.634Z,1478876693.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:54.032Z,1478876694.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:54.265Z,1478876694.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:54.424Z,1478876694.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:54.676Z,1478876694.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:54.841Z,1478876694.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:55.229Z,1478876695.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:55.472Z,1478876695.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:55.626Z,1478876695.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:56.034Z,1478876696.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:56.196Z,1478876696.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:56.426Z,1478876696.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:56.826Z,1478876696.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:56.992Z,1478876696.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:57.233Z,1478876697.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:57.633Z,1478876697.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:57.789Z,1478876697.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:58.030Z,1478876698.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:58.236Z,1478876698.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:58.428Z,1478876698.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:58.839Z,1478876698.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:59.032Z,1478876699.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:04:59.226Z,1478876699.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:59.636Z,1478876699.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:04:59.828Z,1478876699.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:00.034Z,1478876700.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:00.236Z,1478876700.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:00.432Z,1478876700.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:00.857Z,1478876700.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:01.032Z,1478876701.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:01.253Z,1478876701.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:01.620Z,1478876701.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:01.828Z,1478876701.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:02.053Z,1478876702.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:02.236Z,1478876702.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:02.425Z,1478876702.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:02.861Z,1478876702.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:03.032Z,1478876703.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:03.265Z,1478876703.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:03.630Z,1478876703.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:03.828Z,1478876703.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:04.032Z,1478876704.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:04.296Z,1478876704.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:04.429Z,1478876704.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:04.828Z,1478876704.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:05.092Z,1478876705.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:05.224Z,1478876705.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:05.629Z,1478876705.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:05.888Z,1478876705.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:06.032Z,1478876706.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:06.425Z,1478876706.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:06.648Z,1478876706.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:06.833Z,1478876706.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:07.233Z,1478876707.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:07.444Z,1478876707.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:07.633Z,1478876707.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:08.034Z,1478876708.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:08.241Z,1478876708.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:08.434Z,1478876708.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:08.652Z,1478876708.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:08.837Z,1478876708.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:09.238Z,1478876709.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:09.448Z,1478876709.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:09.638Z,1478876709.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:10.037Z,1478876710.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:10.172Z,1478876710.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:10.440Z,1478876710.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:10.841Z,1478876710.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:10.968Z,1478876710.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:11.242Z,1478876711.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:11.621Z,1478876711.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:11.765Z,1478876711.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:12.021Z,1478876712.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:12.180Z,1478876712.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:12.420Z,1478876712.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:12.821Z,1478876712.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:12.976Z,1478876712.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:13.229Z,1478876713.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:13.622Z,1478876713.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:13.780Z,1478876713.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:14.027Z,1478876714.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:14.200Z,1478876714.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:14.435Z,1478876714.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:14.827Z,1478876714.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:14.996Z,1478876714.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:15.257Z,1478876715.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:15.661Z,1478876715.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:15.792Z,1478876715.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:16.025Z,1478876716.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:16.200Z,1478876716.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:16.433Z,1478876716.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:16.850Z,1478876716.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:16.996Z,1478876716.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:17.228Z,1478876717.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:17.653Z,1478876717.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:17.792Z,1478876717.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:18.073Z,1478876718.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:18.272Z,1478876718.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:18.426Z,1478876718.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:18.837Z,1478876718.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:19.069Z,1478876719.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:19.237Z,1478876719.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:19.621Z,1478876719.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:19.864Z,1478876719.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:20.021Z,1478876720.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:20.419Z,1478876720.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:20.628Z,1478876720.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:20.823Z,1478876720.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:21.229Z,1478876721.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:21.424Z,1478876721.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:21.627Z,1478876721.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:22.023Z,1478876722.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:22.221Z,1478876722.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:22.422Z,1478876722.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:22.632Z,1478876722.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:22.830Z,1478876722.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:23.224Z,1478876723.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:23.428Z,1478876723.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:23.632Z,1478876723.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:24.026Z,1478876724.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:24.152Z,1478876724.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:24.440Z,1478876724.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:24.842Z,1478876724.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:24.948Z,1478876724.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:25.241Z,1478876725.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:25.622Z,1478876725.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:25.745Z,1478876725.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:26.029Z,1478876726.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:26.156Z,1478876726.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:26.429Z,1478876726.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:26.823Z,1478876726.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:26.954Z,1478876726.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:27.222Z,1478876727.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:27.635Z,1478876727.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:27.749Z,1478876727.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:28.032Z,1478876728.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:28.164Z,1478876728.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:28.433Z,1478876728.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:28.834Z,1478876728.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:28.960Z,1478876728.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:29.226Z,1478876729.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:29.631Z,1478876729.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:29.757Z,1478876729.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:30.069Z,1478876730.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:30.168Z,1478876730.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:30.461Z,1478876730.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:30.829Z,1478876730.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:30.964Z,1478876730.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:31.269Z,1478876731.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:31.629Z,1478876731.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:31.760Z,1478876731.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:32.053Z,1478876732.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:32.453Z,1478876732.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:32.556Z,1478876732.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:32.840Z,1478876732.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:33.242Z,1478876733.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:33.352Z,1478876733.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:33.643Z,1478876733.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:34.040Z,1478876734.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:34.148Z,1478876734.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:34.443Z,1478876734.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:34.612Z,1478876734.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:34.843Z,1478876734.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:35.241Z,1478876735.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:35.408Z,1478876735.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:35.641Z,1478876735.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:36.013Z,1478876736.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:36.205Z,1478876736.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:36.444Z,1478876736.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:36.616Z,1478876736.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:36.821Z,1478876736.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:37.216Z,1478876737.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:37.412Z,1478876737.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:37.626Z,1478876737.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:38.021Z,1478876738.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:38.164Z,1478876738.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:38.423Z,1478876738.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:38.823Z,1478876738.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:38.960Z,1478876738.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:39.222Z,1478876739.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:39.629Z,1478876739.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:39.756Z,1478876739.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:40.028Z,1478876740.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:40.164Z,1478876740.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:40.429Z,1478876740.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:40.826Z,1478876740.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:40.960Z,1478876740.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:41.227Z,1478876741.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:41.624Z,1478876741.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:41.756Z,1478876741.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:42.029Z,1478876742.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:42.164Z,1478876742.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:42.432Z,1478876742.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:42.825Z,1478876742.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:42.833Z,1478876742.833 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T15:05:42.834Z,1478876742.833 [Default:CheckIn:C.Wait] Stopped
2016-11-11T15:05:42.834Z,1478876742.834 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T15:05:42.834Z,1478876742.834 [Default:CheckIn:D] Running Loop=1
2016-11-11T15:05:42.960Z,1478876742.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:43.226Z,1478876743.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:43.235Z,1478876743.235 [Default:CheckIn:D] Stopped
2016-11-11T15:05:43.235Z,1478876743.235 [Default:CheckIn:E] Running Loop=1
2016-11-11T15:05:43.632Z,1478876743.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:43.644Z,1478876743.644 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 615.698763 min 
2016-11-11T15:05:43.644Z,1478876743.644 [Default:CheckIn:E] Stopped
2016-11-11T15:05:43.645Z,1478876743.645 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T15:05:43.645Z,1478876743.645 [Default:CheckIn] Stopped
2016-11-11T15:05:43.645Z,1478876743.645 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T15:05:43.645Z,1478876743.645 [Default:CheckIn](INFO): Running loop #60
2016-11-11T15:05:43.645Z,1478876743.645 [Default:CheckIn] Running Loop=60
2016-11-11T15:05:43.646Z,1478876743.646 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T15:05:43.646Z,1478876743.646 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T15:05:43.756Z,1478876743.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:44.164Z,1478876744.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:44.960Z,1478876744.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:45.756Z,1478876745.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:46.228Z,1478876746.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:47.024Z,1478876747.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:47.053Z,1478876747.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:47.128Z,1478876747.128 [NAL9602](INFO): Powering up
2016-11-11T15:05:47.185Z,1478876747.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:47.549Z,1478876747.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:47.820Z,1478876747.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:47.970Z,1478876747.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:48.345Z,1478876748.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:48.584Z,1478876748.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:48.773Z,1478876748.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:49.175Z,1478876749.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:49.380Z,1478876749.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:49.544Z,1478876749.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:49.957Z,1478876749.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:50.177Z,1478876750.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:50.353Z,1478876750.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:50.588Z,1478876750.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:50.746Z,1478876750.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:51.147Z,1478876751.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:51.384Z,1478876751.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:51.546Z,1478876751.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:51.948Z,1478876751.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:52.119Z,1478876752.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:52.355Z,1478876752.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:52.758Z,1478876752.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:52.916Z,1478876752.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:53.149Z,1478876753.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:53.557Z,1478876753.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:53.732Z,1478876753.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:53.958Z,1478876753.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:54.140Z,1478876754.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:54.348Z,1478876754.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:54.757Z,1478876754.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:54.936Z,1478876754.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:55.149Z,1478876755.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:55.548Z,1478876755.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:55.734Z,1478876755.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:55.961Z,1478876755.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:56.144Z,1478876756.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:56.356Z,1478876756.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:56.757Z,1478876756.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:56.943Z,1478876756.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:57.157Z,1478876757.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:57.561Z,1478876757.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:57.736Z,1478876757.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:57.966Z,1478876757.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:58.152Z,1478876758.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:58.313Z,1478876758.313 [NAL9602](INFO): NAL9602 initialized
2016-11-11T15:05:58.361Z,1478876758.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:58.745Z,1478876758.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:58.948Z,1478876758.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:59.116Z,1478876759.116 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T15:05:59.116Z,1478876759.116 [NAL9602] Data Fault, FailCount= 2
2016-11-11T15:05:59.116Z,1478876759.116 [NAL9602](ERROR): Data Fault
2016-11-11T15:05:59.153Z,1478876759.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:59.213Z,1478876759.214 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T15:05:59.520Z,1478876759.520 [NAL9602](INFO): Powering down
2016-11-11T15:05:59.557Z,1478876759.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:05:59.744Z,1478876759.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:05:59.957Z,1478876759.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:00.212Z,1478876760.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:00.347Z,1478876760.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:00.383Z,1478876760.383 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T15:06:00.383Z,1478876760.383 [NAL9602] No Fault, FailCount= 2
2016-11-11T15:06:00.817Z,1478876760.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:01.008Z,1478876761.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:01.159Z,1478876761.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:01.178Z,1478876761.178 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T15:06:01.549Z,1478876761.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:01.804Z,1478876761.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:01.990Z,1478876761.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:02.361Z,1478876762.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:02.564Z,1478876762.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:02.777Z,1478876762.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:03.167Z,1478876763.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:03.360Z,1478876763.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:03.554Z,1478876763.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:03.957Z,1478876763.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:04.157Z,1478876764.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:04.361Z,1478876764.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:04.568Z,1478876764.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:04.717Z,1478876764.717 [NAL9602](INFO): Powering up NAL9602
2016-11-11T15:06:04.764Z,1478876764.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:05.140Z,1478876765.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:05.545Z,1478876765.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:05.953Z,1478876765.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:06.347Z,1478876766.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:06.747Z,1478876766.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:07.154Z,1478876767.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:07.547Z,1478876767.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:07.955Z,1478876767.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:08.358Z,1478876768.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:08.750Z,1478876768.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:09.161Z,1478876769.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:09.558Z,1478876769.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:09.950Z,1478876769.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:10.355Z,1478876770.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:10.757Z,1478876770.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:11.157Z,1478876771.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:11.556Z,1478876771.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:11.960Z,1478876771.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:12.356Z,1478876772.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:12.757Z,1478876772.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:13.156Z,1478876773.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:13.556Z,1478876773.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:13.960Z,1478876773.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:14.360Z,1478876774.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:14.760Z,1478876774.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:15.181Z,1478876775.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:15.599Z,1478876775.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:15.909Z,1478876775.909 [NAL9602](INFO): NAL9602 initialized
2016-11-11T15:06:15.945Z,1478876775.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:16.393Z,1478876776.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:16.779Z,1478876776.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:17.197Z,1478876777.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:17.588Z,1478876777.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:17.949Z,1478876777.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:18.354Z,1478876778.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:18.766Z,1478876778.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:19.168Z,1478876779.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:19.560Z,1478876779.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:19.942Z,1478876779.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:20.346Z,1478876780.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:20.744Z,1478876780.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:21.150Z,1478876781.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:21.549Z,1478876781.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:21.948Z,1478876781.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:22.358Z,1478876782.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:22.750Z,1478876782.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:23.149Z,1478876783.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:23.562Z,1478876783.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:23.964Z,1478876783.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:24.354Z,1478876784.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:24.754Z,1478876784.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:25.157Z,1478876785.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:25.547Z,1478876785.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:25.960Z,1478876785.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:26.361Z,1478876786.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:26.760Z,1478876786.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:27.160Z,1478876787.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:27.560Z,1478876787.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:27.961Z,1478876787.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:28.360Z,1478876788.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:28.768Z,1478876788.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:29.162Z,1478876789.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:29.605Z,1478876789.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:29.993Z,1478876789.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:30.349Z,1478876790.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:30.747Z,1478876790.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:31.174Z,1478876791.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:31.557Z,1478876791.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:31.985Z,1478876791.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:32.101Z,1478876792.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:32.384Z,1478876792.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:32.514Z,1478876792.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:32.753Z,1478876792.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:33.152Z,1478876793.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:33.308Z,1478876793.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:33.552Z,1478876793.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:33.968Z,1478876793.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:34.052Z,1478876794.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:34.374Z,1478876794.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:34.772Z,1478876794.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:34.848Z,1478876794.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:35.163Z,1478876795.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:35.560Z,1478876795.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:35.645Z,1478876795.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:35.957Z,1478876795.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:36.056Z,1478876796.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:36.346Z,1478876796.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:36.750Z,1478876796.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:36.852Z,1478876796.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:37.155Z,1478876797.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:37.548Z,1478876797.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:37.649Z,1478876797.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:37.964Z,1478876797.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:38.060Z,1478876798.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:38.358Z,1478876798.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:38.756Z,1478876798.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:38.856Z,1478876798.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:39.178Z,1478876799.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:39.569Z,1478876799.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:39.653Z,1478876799.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:39.962Z,1478876799.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:40.076Z,1478876800.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:40.386Z,1478876800.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:40.745Z,1478876800.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:40.872Z,1478876800.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:41.146Z,1478876801.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:41.554Z,1478876801.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:41.668Z,1478876801.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:41.957Z,1478876801.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:42.164Z,1478876802.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:42.347Z,1478876802.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:42.764Z,1478876802.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:42.960Z,1478876802.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:43.162Z,1478876803.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:43.549Z,1478876803.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:43.756Z,1478876803.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:43.968Z,1478876803.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:44.492Z,1478876804.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:45.288Z,1478876805.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:46.086Z,1478876806.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:46.500Z,1478876806.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:47.297Z,1478876807.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:47.369Z,1478876807.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:47.496Z,1478876807.496 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:06:47.496Z,1478876807.496 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:06:47.496Z,1478876807.496 [BPC1](ERROR): Communications Fault
2016-11-11T15:06:47.509Z,1478876807.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:47.529Z,1478876807.529 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:06:47.863Z,1478876807.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:48.016Z,1478876808.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:48.269Z,1478876808.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:48.657Z,1478876808.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:48.677Z,1478876808.677 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:06:48.677Z,1478876808.677 [BPC1] No Fault, FailCount= 1
2016-11-11T15:06:48.812Z,1478876808.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:49.117Z,1478876809.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:49.498Z,1478876809.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:49.609Z,1478876809.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:49.865Z,1478876809.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:50.020Z,1478876810.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:50.266Z,1478876810.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:50.665Z,1478876810.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:50.816Z,1478876810.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:51.062Z,1478876811.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:51.454Z,1478876811.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:51.615Z,1478876811.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:51.885Z,1478876811.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:52.028Z,1478876812.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:52.263Z,1478876812.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:52.666Z,1478876812.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:52.826Z,1478876812.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:53.064Z,1478876813.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:53.470Z,1478876813.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:53.621Z,1478876813.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:53.869Z,1478876813.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:54.032Z,1478876814.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:54.265Z,1478876814.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:54.713Z,1478876814.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:54.828Z,1478876814.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:55.068Z,1478876815.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:55.468Z,1478876815.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:55.624Z,1478876815.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:55.886Z,1478876815.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:56.120Z,1478876816.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:56.268Z,1478876816.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:56.681Z,1478876816.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:56.916Z,1478876816.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:57.085Z,1478876817.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:57.481Z,1478876817.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:57.722Z,1478876817.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:57.882Z,1478876817.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:58.271Z,1478876818.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:58.464Z,1478876818.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:58.680Z,1478876818.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:59.053Z,1478876819.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:59.262Z,1478876819.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:06:59.457Z,1478876819.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:06:59.855Z,1478876819.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:00.057Z,1478876820.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:00.255Z,1478876820.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:00.468Z,1478876820.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:00.661Z,1478876820.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:01.070Z,1478876821.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:01.264Z,1478876821.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:01.456Z,1478876821.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:01.855Z,1478876821.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:01.000Z,1478876822.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:02.261Z,1478876822.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:02.677Z,1478876822.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:02.796Z,1478876822.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:03.066Z,1478876823.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:03.472Z,1478876823.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:03.604Z,1478876823.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:03.874Z,1478876823.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:04.020Z,1478876824.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:04.268Z,1478876824.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:04.668Z,1478876824.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:04.816Z,1478876824.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:05.068Z,1478876825.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:05.469Z,1478876825.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:05.613Z,1478876825.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:05.877Z,1478876825.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:06.024Z,1478876826.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:06.273Z,1478876826.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:06.653Z,1478876826.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:06.820Z,1478876826.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:07.057Z,1478876827.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:07.457Z,1478876827.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:07.618Z,1478876827.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:07.913Z,1478876827.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:08.028Z,1478876828.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:08.287Z,1478876828.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:08.663Z,1478876828.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:08.824Z,1478876828.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:09.097Z,1478876829.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:09.456Z,1478876829.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:09.620Z,1478876829.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:09.863Z,1478876829.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:10.104Z,1478876830.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:10.303Z,1478876830.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:10.673Z,1478876830.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:10.901Z,1478876830.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:11.094Z,1478876831.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:11.485Z,1478876831.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:11.696Z,1478876831.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:11.853Z,1478876831.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:12.281Z,1478876832.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:12.444Z,1478876832.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:12.666Z,1478876832.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:13.069Z,1478876833.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:13.240Z,1478876833.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:13.459Z,1478876833.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:13.862Z,1478876833.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:14.037Z,1478876834.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:14.264Z,1478876834.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:14.448Z,1478876834.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:14.658Z,1478876834.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:15.074Z,1478876835.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:15.244Z,1478876835.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:15.485Z,1478876835.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:15.883Z,1478876835.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:15.984Z,1478876835.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:16.292Z,1478876836.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:16.673Z,1478876836.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:16.780Z,1478876836.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:17.079Z,1478876837.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:17.463Z,1478876837.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:17.576Z,1478876837.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:17.873Z,1478876837.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:17.988Z,1478876837.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:18.293Z,1478876838.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:18.682Z,1478876838.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:18.784Z,1478876838.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:19.100Z,1478876839.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:19.500Z,1478876839.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:19.580Z,1478876839.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:19.868Z,1478876839.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:19.992Z,1478876839.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:20.278Z,1478876840.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:20.682Z,1478876840.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:20.789Z,1478876840.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:21.101Z,1478876841.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:21.473Z,1478876841.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:21.585Z,1478876841.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:21.862Z,1478876841.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:21.996Z,1478876841.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:22.264Z,1478876842.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:22.682Z,1478876842.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:22.792Z,1478876842.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:23.089Z,1478876843.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:23.494Z,1478876843.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:23.588Z,1478876843.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:23.902Z,1478876843.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:24.068Z,1478876844.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:24.290Z,1478876844.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:24.689Z,1478876844.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:24.866Z,1478876844.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:25.083Z,1478876845.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:25.481Z,1478876845.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:25.660Z,1478876845.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:25.891Z,1478876845.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:26.253Z,1478876846.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:26.428Z,1478876846.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:26.687Z,1478876846.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:27.061Z,1478876847.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:27.226Z,1478876847.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:27.465Z,1478876847.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:27.891Z,1478876847.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:28.021Z,1478876848.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:28.316Z,1478876848.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:28.452Z,1478876848.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:28.687Z,1478876848.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:29.084Z,1478876849.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:29.248Z,1478876849.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:29.451Z,1478876849.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:29.881Z,1478876849.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:30.044Z,1478876850.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:30.290Z,1478876850.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:30.666Z,1478876850.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:30.840Z,1478876850.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:31.102Z,1478876851.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:31.473Z,1478876851.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:31.636Z,1478876851.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:31.909Z,1478876851.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:32.253Z,1478876852.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:32.432Z,1478876852.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:32.659Z,1478876852.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:33.048Z,1478876853.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:33.228Z,1478876853.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:33.452Z,1478876853.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:33.853Z,1478876853.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:34.024Z,1478876854.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:34.252Z,1478876854.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:34.671Z,1478876854.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:34.820Z,1478876854.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:35.057Z,1478876855.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:35.452Z,1478876855.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:35.616Z,1478876855.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:35.854Z,1478876855.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:36.257Z,1478876856.257 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:36.257Z,1478876856.257 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 186
2016-11-11T15:07:36.257Z,1478876856.257 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:07:36.264Z,1478876856.264 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:36.264Z,1478876856.264 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 186
2016-11-11T15:07:36.264Z,1478876856.264 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:07:36.266Z,1478876856.266 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:36.267Z,1478876856.267 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 186
2016-11-11T15:07:36.267Z,1478876856.267 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:07:36.282Z,1478876856.282 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:07:36.282Z,1478876856.282 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:07:36.282Z,1478876856.282 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:07:36.412Z,1478876856.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:36.694Z,1478876856.694 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:07:36.694Z,1478876856.694 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 186
2016-11-11T15:07:36.695Z,1478876856.695 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:07:36.695Z,1478876856.695 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 186
2016-11-11T15:07:36.696Z,1478876856.696 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:07:36.696Z,1478876856.696 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 186
2016-11-11T15:07:37.051Z,1478876857.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:07:37.051Z,1478876857.051 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:07:37.052Z,1478876857.052 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:07:37.056Z,1478876857.056 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:07:37.057Z,1478876857.057 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:07:37.057Z,1478876857.057 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:07:37.058Z,1478876857.057 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:07:37.058Z,1478876857.058 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:07:37.059Z,1478876857.059 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:07:37.208Z,1478876857.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:37.457Z,1478876857.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:37.852Z,1478876857.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:38.004Z,1478876858.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:38.266Z,1478876858.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:38.653Z,1478876858.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:38.800Z,1478876858.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:39.081Z,1478876859.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:39.452Z,1478876859.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:39.596Z,1478876859.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:39.893Z,1478876859.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:40.297Z,1478876860.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:40.392Z,1478876860.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:40.667Z,1478876860.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:41.069Z,1478876861.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:41.188Z,1478876861.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:41.453Z,1478876861.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:41.848Z,1478876861.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:41.984Z,1478876861.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:42.256Z,1478876862.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:42.648Z,1478876862.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:42.780Z,1478876862.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:43.063Z,1478876863.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:43.457Z,1478876863.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:43.576Z,1478876863.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:43.856Z,1478876863.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:44.271Z,1478876864.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:44.372Z,1478876864.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:47.741Z,1478876867.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:47.873Z,1478876867.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:48.217Z,1478876868.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:48.623Z,1478876868.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:49.020Z,1478876869.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:49.423Z,1478876869.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:49.829Z,1478876869.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:49.944Z,1478876869.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:50.213Z,1478876870.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:50.622Z,1478876870.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:50.740Z,1478876870.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:51.009Z,1478876871.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:51.413Z,1478876871.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:51.536Z,1478876871.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:51.813Z,1478876871.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:52.233Z,1478876872.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:52.332Z,1478876872.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:52.613Z,1478876872.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:53.128Z,1478876873.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:53.173Z,1478876873.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:53.478Z,1478876873.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:53.536Z,1478876873.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:53.929Z,1478876873.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:53.944Z,1478876873.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:54.282Z,1478876874.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:54.356Z,1478876874.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:54.666Z,1478876874.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:54.764Z,1478876874.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:55.035Z,1478876875.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:55.172Z,1478876875.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:55.422Z,1478876875.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:55.580Z,1478876875.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:55.868Z,1478876875.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:55.988Z,1478876875.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:56.243Z,1478876876.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:56.400Z,1478876876.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:07:56.631Z,1478876876.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:57.032Z,1478876877.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:57.422Z,1478876877.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:57.826Z,1478876877.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:58.207Z,1478876878.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:58.614Z,1478876878.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:59.021Z,1478876879.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:59.454Z,1478876879.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:07:59.842Z,1478876879.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:00.246Z,1478876880.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:00.644Z,1478876880.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:01.044Z,1478876881.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:01.439Z,1478876881.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:01.824Z,1478876881.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:02.252Z,1478876882.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:02.625Z,1478876882.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:03.033Z,1478876883.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:03.433Z,1478876883.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:03.826Z,1478876883.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:04.258Z,1478876884.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:04.633Z,1478876884.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:04.716Z,1478876884.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:05.025Z,1478876885.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:05.450Z,1478876885.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:05.512Z,1478876885.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:05.827Z,1478876885.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:06.024Z,1478876886.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:06.235Z,1478876886.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:06.660Z,1478876886.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:06.820Z,1478876886.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:07.036Z,1478876887.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:07.450Z,1478876887.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:07.616Z,1478876887.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:07.824Z,1478876887.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:08.258Z,1478876888.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:08.356Z,1478876888.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:08.634Z,1478876888.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:09.036Z,1478876889.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:09.152Z,1478876889.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:09.433Z,1478876889.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:09.837Z,1478876889.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:09.949Z,1478876889.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:10.220Z,1478876890.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:10.624Z,1478876890.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:10.744Z,1478876890.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:11.029Z,1478876891.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:11.152Z,1478876891.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:11.420Z,1478876891.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:11.840Z,1478876891.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:11.916Z,1478876891.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:12.243Z,1478876892.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:12.624Z,1478876892.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:12.714Z,1478876892.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:13.031Z,1478876893.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:13.406Z,1478876893.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:13.508Z,1478876893.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:13.825Z,1478876893.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:13.916Z,1478876893.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:14.225Z,1478876894.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:14.623Z,1478876894.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:14.712Z,1478876894.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:15.018Z,1478876895.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:15.508Z,1478876895.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:15.609Z,1478876895.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:15.840Z,1478876895.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:15.916Z,1478876895.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:16.225Z,1478876896.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:16.625Z,1478876896.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:16.712Z,1478876896.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:17.024Z,1478876897.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:17.407Z,1478876897.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:17.508Z,1478876897.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:17.844Z,1478876897.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:17.916Z,1478876897.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:18.215Z,1478876898.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:18.653Z,1478876898.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:18.712Z,1478876898.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:19.021Z,1478876899.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:19.429Z,1478876899.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:19.508Z,1478876899.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:19.833Z,1478876899.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:19.992Z,1478876899.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:20.232Z,1478876900.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:20.634Z,1478876900.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:20.788Z,1478876900.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:21.034Z,1478876901.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:21.421Z,1478876901.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:21.584Z,1478876901.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:21.838Z,1478876901.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:22.214Z,1478876902.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:22.336Z,1478876902.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:22.661Z,1478876902.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:23.004Z,1478876903.004 [PNI_TCM](ERROR): CRC does not match. Expected:0x46866 got:0x6978
2016-11-11T15:08:23.046Z,1478876903.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:23.132Z,1478876903.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:23.407Z,1478876903.407 [PNI_TCM](ERROR): CRC does not match. Expected:0x26476 got:0x7490
2016-11-11T15:08:23.433Z,1478876903.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:23.821Z,1478876903.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:23.928Z,1478876903.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:24.245Z,1478876904.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:24.340Z,1478876904.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:24.610Z,1478876904.610 [PNI_TCM](ERROR): CRC does not match. Expected:0x12925 got:0x24605
2016-11-11T15:08:24.644Z,1478876904.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:25.015Z,1478876905.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:25.136Z,1478876905.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:25.434Z,1478876905.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:25.828Z,1478876905.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:25.880Z,1478876905.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:26.228Z,1478876906.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:26.637Z,1478876906.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:26.676Z,1478876906.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:27.004Z,1478876907.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:27.473Z,1478876907.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:27.489Z,1478876907.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:27.805Z,1478876907.806 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T15:08:27.840Z,1478876907.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:27.884Z,1478876907.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:28.210Z,1478876908.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:28.617Z,1478876908.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:28.680Z,1478876908.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:29.023Z,1478876909.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:29.469Z,1478876909.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:29.477Z,1478876909.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:29.832Z,1478876909.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:29.888Z,1478876909.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:30.229Z,1478876910.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:30.629Z,1478876910.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:30.684Z,1478876910.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:31.005Z,1478876911.005 [PNI_TCM](ERROR): CRC does not match. Expected:0x56764 got:0x16962
2016-11-11T15:08:31.038Z,1478876911.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:31.470Z,1478876911.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:31.480Z,1478876911.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:31.818Z,1478876911.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:31.888Z,1478876911.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:32.224Z,1478876912.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:32.630Z,1478876912.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:32.684Z,1478876912.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:33.026Z,1478876913.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:33.424Z,1478876913.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:33.480Z,1478876913.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:33.845Z,1478876913.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:33.952Z,1478876913.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:34.198Z,1478876914.197 [PNI_TCM](ERROR): CRC does not match. Expected:0x8026 got:0x7361
2016-11-11T15:08:34.232Z,1478876914.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:34.617Z,1478876914.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:34.748Z,1478876914.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:35.057Z,1478876915.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:35.416Z,1478876915.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:35.544Z,1478876915.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:35.857Z,1478876915.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:36.214Z,1478876916.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:36.316Z,1478876916.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:36.650Z,1478876916.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:37.053Z,1478876917.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:37.112Z,1478876917.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:37.429Z,1478876917.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:37.816Z,1478876917.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:37.909Z,1478876917.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:38.224Z,1478876918.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:38.320Z,1478876918.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:38.625Z,1478876918.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:39.025Z,1478876919.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:39.116Z,1478876919.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:39.477Z,1478876919.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:39.813Z,1478876919.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:39.848Z,1478876919.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:40.218Z,1478876920.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:40.621Z,1478876920.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:40.644Z,1478876920.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:41.017Z,1478876921.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:41.440Z,1478876921.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:41.476Z,1478876921.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:41.819Z,1478876921.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:41.852Z,1478876921.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:42.221Z,1478876922.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:42.618Z,1478876922.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:42.656Z,1478876922.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:43.023Z,1478876923.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:43.452Z,1478876923.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:43.475Z,1478876923.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:43.817Z,1478876923.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:43.865Z,1478876923.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:44.217Z,1478876924.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:44.613Z,1478876924.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:44.660Z,1478876924.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:45.457Z,1478876925.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:45.868Z,1478876925.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:46.665Z,1478876926.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:47.460Z,1478876927.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:47.940Z,1478876927.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:48.129Z,1478876928.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:48.260Z,1478876928.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:48.637Z,1478876928.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:48.736Z,1478876928.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:49.081Z,1478876929.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:49.440Z,1478876929.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:49.532Z,1478876929.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:49.909Z,1478876929.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:50.261Z,1478876930.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:50.292Z,1478876930.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:50.681Z,1478876930.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:51.065Z,1478876931.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:51.088Z,1478876931.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:51.442Z,1478876931.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:51.836Z,1478876931.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:51.884Z,1478876931.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:52.246Z,1478876932.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:52.304Z,1478876932.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:52.644Z,1478876932.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:53.044Z,1478876933.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:53.100Z,1478876933.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:53.501Z,1478876933.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:53.837Z,1478876933.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:53.868Z,1478876933.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:54.249Z,1478876934.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:54.649Z,1478876934.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:54.664Z,1478876934.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:55.050Z,1478876935.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:55.460Z,1478876935.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:55.490Z,1478876935.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:55.845Z,1478876935.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:55.876Z,1478876935.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:56.244Z,1478876936.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:56.645Z,1478876936.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:56.688Z,1478876936.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:57.045Z,1478876937.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:57.484Z,1478876937.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:57.498Z,1478876937.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:57.844Z,1478876937.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:57.892Z,1478876937.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:58.253Z,1478876938.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:58.645Z,1478876938.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:58.688Z,1478876938.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:59.058Z,1478876939.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:59.484Z,1478876939.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:08:59.498Z,1478876939.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:59.857Z,1478876939.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:08:59.892Z,1478876939.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:00.255Z,1478876940.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:00.652Z,1478876940.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:00.688Z,1478876940.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:01.032Z,1478876941.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:01.441Z,1478876941.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:01.485Z,1478876941.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:01.889Z,1478876941.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:01.940Z,1478876941.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:02.244Z,1478876942.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:02.673Z,1478876942.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:02.736Z,1478876942.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:03.057Z,1478876943.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:03.449Z,1478876943.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:03.532Z,1478876943.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:03.914Z,1478876943.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:04.265Z,1478876944.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:04.288Z,1478876944.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:04.681Z,1478876944.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:05.084Z,1478876945.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:05.086Z,1478876945.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:05.449Z,1478876945.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:05.881Z,1478876945.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:05.901Z,1478876945.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:06.245Z,1478876946.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:06.292Z,1478876946.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:06.647Z,1478876946.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:07.045Z,1478876947.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:07.088Z,1478876947.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:07.487Z,1478876947.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:07.806Z,1478876947.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:07.833Z,1478876947.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:08.237Z,1478876948.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:08.600Z,1478876948.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:08.665Z,1478876948.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:09.046Z,1478876949.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:09.396Z,1478876949.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:09.479Z,1478876949.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:09.810Z,1478876949.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:09.878Z,1478876949.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:10.237Z,1478876950.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:10.604Z,1478876950.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:10.649Z,1478876950.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:11.040Z,1478876951.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:11.401Z,1478876951.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:11.467Z,1478876951.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:11.812Z,1478876951.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:11.865Z,1478876951.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:12.261Z,1478876952.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:12.608Z,1478876952.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:12.658Z,1478876952.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:13.049Z,1478876953.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:13.406Z,1478876953.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:13.474Z,1478876953.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:13.820Z,1478876953.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:13.842Z,1478876953.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:14.246Z,1478876954.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:14.616Z,1478876954.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:14.650Z,1478876954.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:15.053Z,1478876955.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:15.412Z,1478876955.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:15.524Z,1478876955.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:15.844Z,1478876955.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:15.888Z,1478876955.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:16.240Z,1478876956.240 [BPC1](ERROR): Failed to parse message.
2016-11-11T15:09:16.240Z,1478876956.240 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T15:09:16.240Z,1478876956.240 [BPC1] Data Fault, FailCount= 1
2016-11-11T15:09:16.240Z,1478876956.240 [BPC1](ERROR): Data Fault
2016-11-11T15:09:16.253Z,1478876956.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:16.306Z,1478876956.306 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T15:09:16.649Z,1478876956.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:16.684Z,1478876956.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:17.054Z,1478876957.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:17.457Z,1478876957.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:17.480Z,1478876957.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:17.497Z,1478876957.497 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:09:17.498Z,1478876957.497 [BPC1] No Fault, FailCount= 1
2016-11-11T15:09:17.967Z,1478876957.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:18.261Z,1478876958.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:18.284Z,1478876958.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:18.653Z,1478876958.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:19.049Z,1478876959.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:19.080Z,1478876959.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:19.454Z,1478876959.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:19.876Z,1478876959.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:19.894Z,1478876959.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:20.247Z,1478876960.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:20.284Z,1478876960.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:20.641Z,1478876960.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:21.057Z,1478876961.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:21.080Z,1478876961.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:21.466Z,1478876961.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:21.776Z,1478876961.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:21.864Z,1478876961.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:22.268Z,1478876962.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:22.572Z,1478876962.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:22.645Z,1478876962.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:23.038Z,1478876963.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:23.369Z,1478876963.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:23.446Z,1478876963.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:23.780Z,1478876963.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:23.846Z,1478876963.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:24.246Z,1478876964.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:24.576Z,1478876964.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:24.654Z,1478876964.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:25.041Z,1478876965.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:25.373Z,1478876965.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:25.445Z,1478876965.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:25.784Z,1478876965.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:25.845Z,1478876965.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:26.257Z,1478876966.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:26.580Z,1478876966.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:26.659Z,1478876966.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:27.055Z,1478876967.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:27.377Z,1478876967.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:27.472Z,1478876967.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:27.800Z,1478876967.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:27.844Z,1478876967.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:28.245Z,1478876968.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:28.596Z,1478876968.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:28.642Z,1478876968.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:29.045Z,1478876969.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:29.392Z,1478876969.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:29.507Z,1478876969.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:29.841Z,1478876969.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:29.868Z,1478876969.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:30.235Z,1478876970.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:30.664Z,1478876970.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:30.681Z,1478876970.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:31.073Z,1478876971.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:31.453Z,1478876971.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:31.460Z,1478876971.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:31.921Z,1478876971.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:32.236Z,1478876972.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:32.281Z,1478876972.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:32.665Z,1478876972.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:33.032Z,1478876973.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:33.069Z,1478876973.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:33.470Z,1478876973.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:33.830Z,1478876973.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:33.886Z,1478876973.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:34.228Z,1478876974.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:34.264Z,1478876974.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:34.633Z,1478876974.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:35.033Z,1478876975.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:35.060Z,1478876975.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:35.435Z,1478876975.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:35.756Z,1478876975.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:35.839Z,1478876975.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:36.237Z,1478876976.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:36.553Z,1478876976.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:36.649Z,1478876976.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:37.039Z,1478876977.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:37.349Z,1478876977.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:37.457Z,1478876977.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:37.768Z,1478876977.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:37.853Z,1478876977.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:38.246Z,1478876978.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:38.566Z,1478876978.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:38.645Z,1478876978.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:39.048Z,1478876979.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:39.361Z,1478876979.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:39.443Z,1478876979.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:39.780Z,1478876979.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:39.845Z,1478876979.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:40.241Z,1478876980.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:40.576Z,1478876980.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:40.639Z,1478876980.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:41.036Z,1478876981.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:41.373Z,1478876981.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:41.457Z,1478876981.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:41.780Z,1478876981.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:41.853Z,1478876981.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:42.253Z,1478876982.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:42.578Z,1478876982.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:42.662Z,1478876982.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:43.057Z,1478876983.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:43.372Z,1478876983.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:43.497Z,1478876983.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:43.833Z,1478876983.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:43.876Z,1478876983.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:44.233Z,1478876984.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:44.636Z,1478876984.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:44.672Z,1478876984.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:45.468Z,1478876985.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:46.212Z,1478876986.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:47.008Z,1478876987.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:47.805Z,1478876987.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:48.167Z,1478876988.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:48.216Z,1478876988.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:48.301Z,1478876988.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:48.651Z,1478876988.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:49.018Z,1478876989.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:49.082Z,1478876989.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:49.445Z,1478876989.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:49.736Z,1478876989.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:49.885Z,1478876989.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:50.242Z,1478876990.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:50.532Z,1478876990.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:50.681Z,1478876990.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:51.045Z,1478876991.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:51.329Z,1478876991.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:51.449Z,1478876991.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:51.740Z,1478876991.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:51.842Z,1478876991.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:52.242Z,1478876992.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:52.536Z,1478876992.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:52.651Z,1478876992.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:53.054Z,1478876993.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:53.333Z,1478876993.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:53.458Z,1478876993.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:53.744Z,1478876993.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:53.853Z,1478876993.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:54.245Z,1478876994.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:54.540Z,1478876994.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:54.648Z,1478876994.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:55.065Z,1478876995.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:55.337Z,1478876995.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:55.473Z,1478876995.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:55.756Z,1478876995.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:55.861Z,1478876995.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:56.257Z,1478876996.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:56.552Z,1478876996.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:56.650Z,1478876996.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:57.040Z,1478876997.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:57.348Z,1478876997.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:57.490Z,1478876997.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:57.851Z,1478876997.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:57.872Z,1478876997.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:58.251Z,1478876998.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:58.645Z,1478876998.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:58.668Z,1478876998.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:59.056Z,1478876999.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:59.437Z,1478876999.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:09:59.464Z,1478876999.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:09:59.861Z,1478876999.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:00.188Z,1478877000.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:00.262Z,1478877000.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:00.655Z,1478877000.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:00.984Z,1478877000.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:01.069Z,1478877001.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:01.454Z,1478877001.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:01.781Z,1478877001.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:01.888Z,1478877001.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:02.192Z,1478877002.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:02.249Z,1478877002.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:02.685Z,1478877002.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:02.988Z,1478877002.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:03.041Z,1478877003.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:03.468Z,1478877003.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:03.716Z,1478877003.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:03.841Z,1478877003.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:04.274Z,1478877004.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:04.512Z,1478877004.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:04.640Z,1478877004.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:05.069Z,1478877005.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:05.309Z,1478877005.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:05.455Z,1478877005.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:05.720Z,1478877005.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:05.849Z,1478877005.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:06.251Z,1478877006.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:06.518Z,1478877006.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:06.649Z,1478877006.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:07.049Z,1478877007.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:07.313Z,1478877007.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:07.453Z,1478877007.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:07.732Z,1478877007.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:07.846Z,1478877007.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:08.251Z,1478877008.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:08.528Z,1478877008.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:08.642Z,1478877008.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:09.057Z,1478877009.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:09.325Z,1478877009.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:09.450Z,1478877009.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:09.740Z,1478877009.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:09.848Z,1478877009.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:10.252Z,1478877010.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:10.536Z,1478877010.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:10.655Z,1478877010.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:11.052Z,1478877011.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:11.332Z,1478877011.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:11.472Z,1478877011.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:11.860Z,1478877011.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:11.877Z,1478877011.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:12.245Z,1478877012.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:12.649Z,1478877012.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:12.656Z,1478877012.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:13.053Z,1478877013.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:13.441Z,1478877013.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:13.452Z,1478877013.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:13.852Z,1478877013.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:14.164Z,1478877014.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:14.250Z,1478877014.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:14.645Z,1478877014.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:14.960Z,1478877014.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:15.053Z,1478877015.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:15.449Z,1478877015.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:15.757Z,1478877015.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:15.855Z,1478877015.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:16.168Z,1478877016.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:16.254Z,1478877016.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:16.674Z,1478877016.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:16.964Z,1478877016.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:17.077Z,1478877017.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:17.453Z,1478877017.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:17.696Z,1478877017.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:17.865Z,1478877017.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:18.252Z,1478877018.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:18.492Z,1478877018.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:18.669Z,1478877018.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:19.066Z,1478877019.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:19.289Z,1478877019.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:19.449Z,1478877019.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:19.700Z,1478877019.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:19.849Z,1478877019.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:20.257Z,1478877020.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:20.496Z,1478877020.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:20.652Z,1478877020.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:21.057Z,1478877021.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:21.293Z,1478877021.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:21.465Z,1478877021.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:21.704Z,1478877021.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:21.864Z,1478877021.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:22.259Z,1478877022.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:22.500Z,1478877022.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:22.657Z,1478877022.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:23.034Z,1478877023.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:23.297Z,1478877023.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:23.457Z,1478877023.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:23.708Z,1478877023.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:23.841Z,1478877023.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:24.245Z,1478877024.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:24.504Z,1478877024.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:24.645Z,1478877024.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:25.049Z,1478877025.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:25.300Z,1478877025.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:25.490Z,1478877025.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:25.785Z,1478877025.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:25.857Z,1478877025.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:26.265Z,1478877026.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:26.580Z,1478877026.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:26.659Z,1478877026.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:27.069Z,1478877027.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:27.376Z,1478877027.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:27.458Z,1478877027.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:27.837Z,1478877027.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:28.144Z,1478877028.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:28.237Z,1478877028.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:28.645Z,1478877028.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:28.940Z,1478877028.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:29.040Z,1478877029.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:29.449Z,1478877029.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:29.738Z,1478877029.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:29.851Z,1478877029.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:30.184Z,1478877030.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:30.250Z,1478877030.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:30.642Z,1478877030.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:30.980Z,1478877030.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:31.105Z,1478877031.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:31.454Z,1478877031.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:31.672Z,1478877031.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:31.894Z,1478877031.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:32.264Z,1478877032.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:32.468Z,1478877032.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:32.695Z,1478877032.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:33.062Z,1478877033.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:33.265Z,1478877033.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:33.452Z,1478877033.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:33.676Z,1478877033.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:33.852Z,1478877033.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:34.251Z,1478877034.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:34.472Z,1478877034.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:34.649Z,1478877034.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:35.053Z,1478877035.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:35.276Z,1478877035.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:35.460Z,1478877035.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:35.692Z,1478877035.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:35.849Z,1478877035.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:36.241Z,1478877036.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:36.488Z,1478877036.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:36.653Z,1478877036.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:37.048Z,1478877037.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:37.285Z,1478877037.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:37.456Z,1478877037.456 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:37.456Z,1478877037.456 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 187
2016-11-11T15:10:37.456Z,1478877037.456 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:10:37.463Z,1478877037.463 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:37.463Z,1478877037.463 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 187
2016-11-11T15:10:37.463Z,1478877037.463 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:10:37.481Z,1478877037.481 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:37.481Z,1478877037.481 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 187
2016-11-11T15:10:37.481Z,1478877037.481 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:10:37.512Z,1478877037.512 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:10:37.512Z,1478877037.512 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:10:37.512Z,1478877037.513 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:10:37.696Z,1478877037.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:37.889Z,1478877037.889 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:10:37.889Z,1478877037.889 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 187
2016-11-11T15:10:37.890Z,1478877037.890 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:10:37.890Z,1478877037.890 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 187
2016-11-11T15:10:37.890Z,1478877037.890 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:10:37.891Z,1478877037.891 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 187
2016-11-11T15:10:38.253Z,1478877038.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:10:38.254Z,1478877038.254 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:10:38.254Z,1478877038.254 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:10:38.259Z,1478877038.259 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:10:38.260Z,1478877038.260 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:10:38.260Z,1478877038.260 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:10:38.260Z,1478877038.260 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:10:38.261Z,1478877038.261 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:10:38.261Z,1478877038.261 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:10:38.492Z,1478877038.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:38.653Z,1478877038.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:39.054Z,1478877039.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:39.288Z,1478877039.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:39.464Z,1478877039.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:39.776Z,1478877039.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:39.858Z,1478877039.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:40.237Z,1478877040.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:40.572Z,1478877040.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:40.658Z,1478877040.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:41.040Z,1478877041.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:41.368Z,1478877041.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:41.446Z,1478877041.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:41.855Z,1478877041.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:42.124Z,1478877042.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:42.256Z,1478877042.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:42.653Z,1478877042.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:42.920Z,1478877042.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:43.067Z,1478877043.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:43.433Z,1478877043.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:43.717Z,1478877043.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:43.833Z,1478877043.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:43.867Z,1478877043.867 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T15:05:43.6Z
2016-11-11T15:10:43.867Z,1478877043.867 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T15:10:43.867Z,1478877043.867 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T15:10:44.128Z,1478877044.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:44.261Z,1478877044.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:44.924Z,1478877044.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:45.197Z,1478877045.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:45.668Z,1478877045.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:46.465Z,1478877046.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:47.261Z,1478877047.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:47.676Z,1478877047.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:48.472Z,1478877048.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:48.635Z,1478877048.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:48.684Z,1478877048.684 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0240.lzma
2016-11-11T15:10:48.780Z,1478877048.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:49.138Z,1478877049.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:49.268Z,1478877049.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:49.465Z,1478877049.465 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0240.lzma.bak
2016-11-11T15:10:49.466Z,1478877049.466 [DataOverHttps](INFO): SBD MOMSN=4555515
2016-11-11T15:10:49.544Z,1478877049.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:49.676Z,1478877049.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:50.472Z,1478877050.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:50.825Z,1478877050.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:50.961Z,1478877050.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:51.268Z,1478877051.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:51.796Z,1478877051.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:52.593Z,1478877052.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:53.388Z,1478877053.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:53.796Z,1478877053.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:54.417Z,1478877054.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:54.561Z,1478877054.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:54.592Z,1478877054.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:54.899Z,1478877054.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:55.319Z,1478877055.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:55.388Z,1478877055.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:55.775Z,1478877055.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:56.092Z,1478877056.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:56.144Z,1478877056.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:56.940Z,1478877056.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:57.736Z,1478877057.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:58.144Z,1478877058.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:58.940Z,1478877058.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:59.610Z,1478877059.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:10:59.773Z,1478877059.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:10:59.803Z,1478877059.803 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0241.lzma
2016-11-11T15:10:59.925Z,1478877059.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:00.259Z,1478877060.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:00.404Z,1478877060.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:01.200Z,1478877061.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:01.996Z,1478877061.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:02.792Z,1478877062.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:03.588Z,1478877063.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:04.384Z,1478877064.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:05.180Z,1478877065.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:05.976Z,1478877065.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:06.772Z,1478877066.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:07.568Z,1478877067.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:08.364Z,1478877068.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:09.162Z,1478877069.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:09.956Z,1478877069.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:10.752Z,1478877070.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:11.548Z,1478877071.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:12.344Z,1478877072.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:13.140Z,1478877073.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:13.936Z,1478877073.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:14.732Z,1478877074.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:15.528Z,1478877075.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:16.324Z,1478877076.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:17.120Z,1478877077.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:17.916Z,1478877077.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:18.712Z,1478877078.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:19.115Z,1478877079.115 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0241.lzma.bak
2016-11-11T15:11:19.115Z,1478877079.115 [DataOverHttps](INFO): SBD MOMSN=4555517
2016-11-11T15:11:19.129Z,1478877079.129 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T15:11:19.224Z,1478877079.224 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:11:19.224Z,1478877079.224 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:11:19.224Z,1478877079.224 [BPC1](ERROR): Communications Fault
2016-11-11T15:11:19.257Z,1478877079.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:19.298Z,1478877079.298 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:11:19.508Z,1478877079.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:19.916Z,1478877079.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:20.328Z,1478877080.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:20.736Z,1478877080.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:20.928Z,1478877080.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:20.937Z,1478877080.937 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T15:11:20.937Z,1478877080.937 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T15:11:20.937Z,1478877080.937 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T15:11:21.062Z,1478877081.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:21.144Z,1478877081.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:21.552Z,1478877081.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:21.962Z,1478877081.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:22.380Z,1478877082.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:22.788Z,1478877082.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:23.196Z,1478877083.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:23.606Z,1478877083.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:24.040Z,1478877084.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:24.448Z,1478877084.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:24.451Z,1478877084.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:24.491Z,1478877084.491 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:11:24.491Z,1478877084.491 [BPC1] No Fault, FailCount= 1
2016-11-11T15:11:24.649Z,1478877084.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:24.953Z,1478877084.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:25.244Z,1478877085.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:25.373Z,1478877085.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:25.736Z,1478877085.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:26.040Z,1478877086.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:26.108Z,1478877086.108 [NAL9602](INFO): Powering down
2016-11-11T15:11:26.143Z,1478877086.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:26.549Z,1478877086.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:26.836Z,1478877086.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:26.969Z,1478877086.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:27.245Z,1478877087.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:27.369Z,1478877087.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:27.656Z,1478877087.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:27.766Z,1478877087.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:28.140Z,1478877088.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:28.452Z,1478877088.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:28.545Z,1478877088.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:28.945Z,1478877088.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:29.248Z,1478877089.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:29.348Z,1478877089.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:29.656Z,1478877089.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:29.746Z,1478877089.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:30.157Z,1478877090.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:30.452Z,1478877090.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:30.553Z,1478877090.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:30.943Z,1478877090.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:31.248Z,1478877091.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:31.352Z,1478877091.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:31.656Z,1478877091.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:31.746Z,1478877091.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:32.144Z,1478877092.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:32.452Z,1478877092.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:32.553Z,1478877092.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:32.953Z,1478877092.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:33.248Z,1478877093.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:33.351Z,1478877093.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:33.656Z,1478877093.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:33.745Z,1478877093.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:34.146Z,1478877094.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:34.452Z,1478877094.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:34.553Z,1478877094.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:34.961Z,1478877094.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:35.249Z,1478877095.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:35.349Z,1478877095.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:35.660Z,1478877095.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:35.746Z,1478877095.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:36.157Z,1478877096.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:36.456Z,1478877096.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:36.546Z,1478877096.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:36.947Z,1478877096.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:37.252Z,1478877097.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:37.397Z,1478877097.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:37.765Z,1478877097.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:38.008Z,1478877098.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:38.174Z,1478877098.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:38.557Z,1478877098.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:38.804Z,1478877098.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:38.984Z,1478877098.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:39.382Z,1478877099.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:39.601Z,1478877099.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:39.753Z,1478877099.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:40.012Z,1478877100.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:40.152Z,1478877100.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:40.552Z,1478877100.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:40.808Z,1478877100.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:40.962Z,1478877100.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:41.345Z,1478877101.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:41.536Z,1478877101.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:41.752Z,1478877101.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:42.156Z,1478877102.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:42.332Z,1478877102.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:42.552Z,1478877102.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:42.958Z,1478877102.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:43.129Z,1478877103.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:43.353Z,1478877103.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:43.544Z,1478877103.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:43.746Z,1478877103.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:44.153Z,1478877104.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:44.340Z,1478877104.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:44.554Z,1478877104.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:44.946Z,1478877104.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:45.137Z,1478877105.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:45.356Z,1478877105.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:45.548Z,1478877105.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:45.753Z,1478877105.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:46.198Z,1478877106.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:46.344Z,1478877106.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:46.562Z,1478877106.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:46.952Z,1478877106.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:47.141Z,1478877107.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:47.352Z,1478877107.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:47.552Z,1478877107.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:47.757Z,1478877107.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:48.157Z,1478877108.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:48.348Z,1478877108.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:48.556Z,1478877108.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:48.957Z,1478877108.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:49.144Z,1478877109.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:49.354Z,1478877109.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:49.628Z,1478877109.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:49.756Z,1478877109.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:50.155Z,1478877110.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:50.424Z,1478877110.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:50.556Z,1478877110.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:50.952Z,1478877110.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:51.220Z,1478877111.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:51.361Z,1478877111.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:51.781Z,1478877111.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:51.984Z,1478877111.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:52.141Z,1478877112.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:52.539Z,1478877112.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:52.780Z,1478877112.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:52.943Z,1478877112.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:53.342Z,1478877113.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:53.577Z,1478877113.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:53.753Z,1478877113.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:53.988Z,1478877113.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:54.144Z,1478877114.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:54.536Z,1478877114.536 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:11:54.536Z,1478877114.536 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:11:54.536Z,1478877114.536 [BPC1](ERROR): Communications Fault
2016-11-11T15:11:54.544Z,1478877114.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:54.564Z,1478877114.565 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:11:54.784Z,1478877114.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:54.957Z,1478877114.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:55.349Z,1478877115.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:55.512Z,1478877115.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:55.790Z,1478877115.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:55.831Z,1478877115.832 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:11:55.832Z,1478877115.832 [BPC1] No Fault, FailCount= 1
2016-11-11T15:11:56.201Z,1478877116.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:56.308Z,1478877116.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:56.556Z,1478877116.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:56.952Z,1478877116.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:57.105Z,1478877117.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:57.352Z,1478877117.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:57.516Z,1478877117.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:57.752Z,1478877117.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:58.153Z,1478877118.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:58.312Z,1478877118.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:58.552Z,1478877118.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:58.962Z,1478877118.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:59.108Z,1478877119.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:59.336Z,1478877119.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:11:59.520Z,1478877119.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:11:59.777Z,1478877119.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:00.165Z,1478877120.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:00.316Z,1478877120.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:00.541Z,1478877120.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:00.941Z,1478877120.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:01.113Z,1478877121.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:01.345Z,1478877121.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:01.524Z,1478877121.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:01.736Z,1478877121.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:02.149Z,1478877122.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:02.320Z,1478877122.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:02.542Z,1478877122.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:02.956Z,1478877122.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:03.116Z,1478877123.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:03.348Z,1478877123.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:03.612Z,1478877123.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:03.743Z,1478877123.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:04.144Z,1478877124.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:04.408Z,1478877124.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:04.544Z,1478877124.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:04.943Z,1478877124.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:05.204Z,1478877125.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:05.346Z,1478877125.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:05.757Z,1478877125.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:05.000Z,1478877126.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:06.143Z,1478877126.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:06.549Z,1478877126.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:06.796Z,1478877126.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:06.955Z,1478877126.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:07.343Z,1478877127.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:07.592Z,1478877127.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:07.746Z,1478877127.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:08.221Z,1478877128.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:08.388Z,1478877128.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:08.548Z,1478877128.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:08.946Z,1478877128.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:09.184Z,1478877129.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:09.354Z,1478877129.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:09.756Z,1478877129.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:09.980Z,1478877129.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:10.129Z,1478877130.129 [BPC1](ERROR): Failed to parse message.
2016-11-11T15:12:10.129Z,1478877130.129 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T15:12:10.130Z,1478877130.129 [BPC1] Data Fault, FailCount= 2
2016-11-11T15:12:10.130Z,1478877130.129 [BPC1](ERROR): Data Fault
2016-11-11T15:12:10.172Z,1478877130.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:10.208Z,1478877130.208 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T15:12:10.556Z,1478877130.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:10.776Z,1478877130.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:10.956Z,1478877130.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:11.356Z,1478877131.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:11.376Z,1478877131.376 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:12:11.376Z,1478877131.376 [BPC1] No Fault, FailCount= 2
2016-11-11T15:12:11.572Z,1478877131.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:11.964Z,1478877131.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:12.158Z,1478877132.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:12.368Z,1478877132.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:12.573Z,1478877132.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:12.962Z,1478877132.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:13.164Z,1478877133.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:13.354Z,1478877133.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:13.794Z,1478877133.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:13.962Z,1478877133.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:14.156Z,1478877134.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:14.595Z,1478877134.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:14.756Z,1478877134.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:14.963Z,1478877134.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:15.168Z,1478877135.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:15.370Z,1478877135.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:15.576Z,1478877135.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:15.767Z,1478877135.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:15.984Z,1478877135.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:16.160Z,1478877136.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:16.392Z,1478877136.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:16.547Z,1478877136.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:16.800Z,1478877136.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:16.981Z,1478877136.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:17.209Z,1478877137.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:17.366Z,1478877137.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:17.616Z,1478877137.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:17.754Z,1478877137.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:18.161Z,1478877138.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:18.412Z,1478877138.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:18.566Z,1478877138.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:18.946Z,1478877138.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:19.208Z,1478877139.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:19.346Z,1478877139.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:19.759Z,1478877139.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:19.948Z,1478877139.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:20.174Z,1478877140.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:20.536Z,1478877140.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:20.746Z,1478877140.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:20.982Z,1478877140.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:21.342Z,1478877141.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:21.540Z,1478877141.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:21.972Z,1478877141.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:22.768Z,1478877142.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:23.476Z,1478877143.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:24.272Z,1478877144.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:25.069Z,1478877145.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:25.480Z,1478877145.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:25.663Z,1478877145.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:25.854Z,1478877145.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:26.221Z,1478877146.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:26.276Z,1478877146.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:26.605Z,1478877146.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:27.072Z,1478877147.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:27.106Z,1478877147.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:27.422Z,1478877147.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:27.484Z,1478877147.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:27.819Z,1478877147.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:28.197Z,1478877148.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:28.280Z,1478877148.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:28.597Z,1478877148.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:29.004Z,1478877149.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:29.076Z,1478877149.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:29.402Z,1478877149.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:29.488Z,1478877149.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:29.809Z,1478877149.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:30.202Z,1478877150.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:30.284Z,1478877150.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:30.608Z,1478877150.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:31.048Z,1478877151.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:31.080Z,1478877151.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:31.420Z,1478877151.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:31.564Z,1478877151.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:31.823Z,1478877151.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:32.185Z,1478877152.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:32.361Z,1478877152.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:32.601Z,1478877152.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:32.998Z,1478877152.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:33.156Z,1478877153.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:33.404Z,1478877153.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:33.801Z,1478877153.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:33.920Z,1478877153.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:34.196Z,1478877154.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:34.601Z,1478877154.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:34.716Z,1478877154.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:35.011Z,1478877155.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:35.396Z,1478877155.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:35.512Z,1478877155.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:35.801Z,1478877155.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:35.924Z,1478877155.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:36.194Z,1478877156.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:36.605Z,1478877156.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:36.720Z,1478877156.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:37.072Z,1478877157.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:37.400Z,1478877157.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:37.472Z,1478877157.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:37.802Z,1478877157.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:38.220Z,1478877158.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:38.268Z,1478877158.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:38.640Z,1478877158.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:38.990Z,1478877158.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:39.064Z,1478877159.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:39.469Z,1478877159.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:39.476Z,1478877159.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:39.816Z,1478877159.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:40.230Z,1478877160.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:40.272Z,1478877160.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:40.602Z,1478877160.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:41.057Z,1478877161.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:41.068Z,1478877161.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:41.421Z,1478877161.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:41.480Z,1478877161.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:41.829Z,1478877161.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:42.197Z,1478877162.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:42.276Z,1478877162.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:42.589Z,1478877162.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:42.994Z,1478877162.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:43.072Z,1478877163.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:43.393Z,1478877163.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:43.480Z,1478877163.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:43.790Z,1478877163.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:44.169Z,1478877164.169 [PNI_TCM](ERROR): CRC does not match. Expected:0x1477 got:0x94
2016-11-11T15:12:44.197Z,1478877164.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:44.276Z,1478877164.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:44.592Z,1478877164.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:44.997Z,1478877164.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:45.073Z,1478877165.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:45.391Z,1478877165.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:45.548Z,1478877165.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:45.797Z,1478877165.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:46.193Z,1478877166.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:46.344Z,1478877166.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:46.596Z,1478877166.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:46.992Z,1478877166.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:47.140Z,1478877167.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:47.396Z,1478877167.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:47.801Z,1478877167.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:47.904Z,1478877167.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:48.183Z,1478877168.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:48.582Z,1478877168.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:48.700Z,1478877168.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:49.006Z,1478877169.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:49.405Z,1478877169.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:49.497Z,1478877169.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:49.774Z,1478877169.774 [PNI_TCM](ERROR): CRC does not match. Expected:0x55287 got:0x43870
2016-11-11T15:12:49.801Z,1478877169.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:50.182Z,1478877170.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:50.292Z,1478877170.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:50.585Z,1478877170.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:51.005Z,1478877171.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:51.088Z,1478877171.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:51.373Z,1478877171.373 [PNI_TCM](ERROR): CRC does not match. Expected:0x29457 got:0x16962
2016-11-11T15:12:51.401Z,1478877171.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:51.809Z,1478877171.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:51.884Z,1478877171.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:52.201Z,1478877172.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:52.597Z,1478877172.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:52.680Z,1478877172.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:52.973Z,1478877172.973 [PNI_TCM](ERROR): CRC does not match. Expected:0x51232 got:0x48994
2016-11-11T15:12:53.005Z,1478877173.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:53.393Z,1478877173.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:53.476Z,1478877173.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:53.805Z,1478877173.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:54.187Z,1478877174.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:54.272Z,1478877174.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:54.582Z,1478877174.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:55.017Z,1478877175.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:55.068Z,1478877175.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:55.381Z,1478877175.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:55.817Z,1478877175.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:55.864Z,1478877175.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:56.209Z,1478877176.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:56.581Z,1478877176.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:56.660Z,1478877176.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:56.985Z,1478877176.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:57.404Z,1478877177.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:57.456Z,1478877177.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:57.785Z,1478877177.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:58.181Z,1478877178.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:58.252Z,1478877178.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:58.595Z,1478877178.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:58.989Z,1478877178.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:59.048Z,1478877179.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:12:59.419Z,1478877179.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:59.780Z,1478877179.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:12:59.844Z,1478877179.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:00.179Z,1478877180.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:00.590Z,1478877180.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:00.640Z,1478877180.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:00.980Z,1478877180.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:01.381Z,1478877181.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:01.436Z,1478877181.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:01.785Z,1478877181.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:02.178Z,1478877182.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:02.232Z,1478877182.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:02.580Z,1478877182.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:02.976Z,1478877182.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:03.028Z,1478877183.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:03.385Z,1478877183.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:03.779Z,1478877183.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:03.824Z,1478877183.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:04.180Z,1478877184.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:04.591Z,1478877184.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:04.620Z,1478877184.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:04.990Z,1478877184.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:05.393Z,1478877185.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:05.416Z,1478877185.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:05.785Z,1478877185.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:06.180Z,1478877186.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:06.212Z,1478877186.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:06.581Z,1478877186.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:07.008Z,1478877187.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:07.019Z,1478877187.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:07.385Z,1478877187.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:07.785Z,1478877187.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:07.804Z,1478877187.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:08.202Z,1478877188.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:08.600Z,1478877188.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:08.606Z,1478877188.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:09.021Z,1478877189.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:09.385Z,1478877189.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:09.396Z,1478877189.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:09.806Z,1478877189.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:10.192Z,1478877190.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:10.213Z,1478877190.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:10.580Z,1478877190.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:10.988Z,1478877190.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:10.993Z,1478877190.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:11.385Z,1478877191.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:11.779Z,1478877191.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:11.784Z,1478877191.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:12.180Z,1478877192.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:12.580Z,1478877192.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:12.594Z,1478877192.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:12.985Z,1478877192.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:13.376Z,1478877193.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:13.382Z,1478877193.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:13.780Z,1478877193.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:14.173Z,1478877194.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:14.220Z,1478877194.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:14.581Z,1478877194.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:14.748Z,1478877194.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:14.980Z,1478877194.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:15.393Z,1478877195.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:15.544Z,1478877195.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:15.797Z,1478877195.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:15.952Z,1478877195.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:16.194Z,1478877196.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:16.360Z,1478877196.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:16.584Z,1478877196.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:16.768Z,1478877196.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:16.981Z,1478877196.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:17.176Z,1478877197.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:17.389Z,1478877197.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:17.584Z,1478877197.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:17.800Z,1478877197.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:17.992Z,1478877197.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:18.189Z,1478877198.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:18.400Z,1478877198.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:18.589Z,1478877198.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:18.808Z,1478877198.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:19.049Z,1478877199.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:19.216Z,1478877199.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:19.389Z,1478877199.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:19.624Z,1478877199.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:19.789Z,1478877199.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:20.032Z,1478877200.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:20.176Z,1478877200.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:20.440Z,1478877200.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:20.589Z,1478877200.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:20.848Z,1478877200.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:21.066Z,1478877201.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:21.256Z,1478877201.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:21.389Z,1478877201.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:21.664Z,1478877201.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:22.072Z,1478877202.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:22.868Z,1478877202.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:23.376Z,1478877203.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:24.172Z,1478877204.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:24.969Z,1478877204.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:25.380Z,1478877205.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:26.176Z,1478877206.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:26.972Z,1478877206.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:27.472Z,1478877207.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:27.608Z,1478877207.608 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:13:27.608Z,1478877207.608 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:13:27.608Z,1478877207.608 [BPC1](ERROR): Communications Fault
2016-11-11T15:13:27.616Z,1478877207.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:27.683Z,1478877207.684 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:13:27.761Z,1478877207.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:28.155Z,1478877208.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:28.268Z,1478877208.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:28.567Z,1478877208.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:28.587Z,1478877208.587 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:13:28.587Z,1478877208.587 [BPC1] No Fault, FailCount= 1
2016-11-11T15:13:29.013Z,1478877209.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:29.064Z,1478877209.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:29.424Z,1478877209.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:29.750Z,1478877209.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:29.860Z,1478877209.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:30.151Z,1478877210.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:30.557Z,1478877210.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:30.656Z,1478877210.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:30.977Z,1478877210.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:31.349Z,1478877211.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:31.453Z,1478877211.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:31.750Z,1478877211.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:31.864Z,1478877211.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:32.151Z,1478877212.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:32.552Z,1478877212.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:32.660Z,1478877212.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:33.008Z,1478877213.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:33.334Z,1478877213.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:33.432Z,1478877213.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:33.734Z,1478877213.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:34.138Z,1478877214.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:34.228Z,1478877214.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:34.538Z,1478877214.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:34.981Z,1478877214.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:35.024Z,1478877215.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:35.340Z,1478877215.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:35.436Z,1478877215.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:35.745Z,1478877215.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:36.153Z,1478877216.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:36.232Z,1478877216.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:36.549Z,1478877216.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:37.015Z,1478877217.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:37.028Z,1478877217.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:37.332Z,1478877217.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:37.464Z,1478877217.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:37.734Z,1478877217.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:38.133Z,1478877218.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:38.260Z,1478877218.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:38.533Z,1478877218.533 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:38.533Z,1478877218.533 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 188
2016-11-11T15:13:38.534Z,1478877218.533 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:13:38.540Z,1478877218.540 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:38.540Z,1478877218.540 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 188
2016-11-11T15:13:38.540Z,1478877218.540 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:13:38.543Z,1478877218.543 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:38.543Z,1478877218.543 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 188
2016-11-11T15:13:38.543Z,1478877218.543 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:13:38.586Z,1478877218.586 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:13:38.586Z,1478877218.586 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:13:38.586Z,1478877218.586 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:13:39.038Z,1478877219.038 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:13:39.038Z,1478877219.038 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 188
2016-11-11T15:13:39.043Z,1478877219.043 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:13:39.043Z,1478877219.043 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 188
2016-11-11T15:13:39.044Z,1478877219.044 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:13:39.044Z,1478877219.044 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 188
2016-11-11T15:13:39.056Z,1478877219.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:39.356Z,1478877219.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:13:39.356Z,1478877219.356 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:13:39.357Z,1478877219.357 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:13:39.362Z,1478877219.362 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:13:39.362Z,1478877219.362 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:13:39.363Z,1478877219.362 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:13:39.379Z,1478877219.379 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:13:39.380Z,1478877219.380 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:13:39.380Z,1478877219.380 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:13:39.464Z,1478877219.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:39.770Z,1478877219.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:40.149Z,1478877220.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:40.260Z,1478877220.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:40.535Z,1478877220.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:40.938Z,1478877220.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:41.057Z,1478877221.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:41.345Z,1478877221.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:41.492Z,1478877221.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:41.758Z,1478877221.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:42.168Z,1478877222.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:42.288Z,1478877222.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:42.565Z,1478877222.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:42.947Z,1478877222.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:43.084Z,1478877223.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:43.361Z,1478877223.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:43.774Z,1478877223.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:43.880Z,1478877223.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:44.135Z,1478877224.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:44.288Z,1478877224.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:44.536Z,1478877224.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:44.949Z,1478877224.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:45.084Z,1478877225.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:45.445Z,1478877225.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:45.780Z,1478877225.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:45.880Z,1478877225.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:46.149Z,1478877226.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:46.288Z,1478877226.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:46.544Z,1478877226.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:47.008Z,1478877227.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:47.084Z,1478877227.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:47.385Z,1478877227.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:47.492Z,1478877227.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:47.761Z,1478877227.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:48.153Z,1478877228.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:48.288Z,1478877228.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:48.551Z,1478877228.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:48.994Z,1478877228.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:49.084Z,1478877229.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:49.342Z,1478877229.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:49.492Z,1478877229.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:49.747Z,1478877229.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:50.146Z,1478877230.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:50.288Z,1478877230.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:50.538Z,1478877230.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:51.004Z,1478877231.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:51.084Z,1478877231.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:51.353Z,1478877231.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:51.492Z,1478877231.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:51.756Z,1478877231.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:52.135Z,1478877232.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:52.288Z,1478877232.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:52.534Z,1478877232.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:52.985Z,1478877232.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:53.084Z,1478877233.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:53.341Z,1478877233.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:53.492Z,1478877233.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:53.745Z,1478877233.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:54.137Z,1478877234.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:54.288Z,1478877234.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:54.581Z,1478877234.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:54.946Z,1478877234.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:55.084Z,1478877235.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:55.356Z,1478877235.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:55.492Z,1478877235.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:55.777Z,1478877235.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:56.149Z,1478877236.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:56.288Z,1478877236.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:56.577Z,1478877236.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:56.945Z,1478877236.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:57.084Z,1478877237.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:57.390Z,1478877237.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:57.784Z,1478877237.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:57.860Z,1478877237.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:58.149Z,1478877238.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:58.583Z,1478877238.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:58.656Z,1478877238.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:58.966Z,1478877238.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:59.399Z,1478877239.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:59.452Z,1478877239.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:13:59.753Z,1478877239.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:13:59.864Z,1478877239.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:00.136Z,1478877240.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:00.535Z,1478877240.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:00.660Z,1478877240.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:00.976Z,1478877240.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:01.344Z,1478877241.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:01.408Z,1478877241.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:01.753Z,1478877241.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:02.183Z,1478877242.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:02.204Z,1478877242.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:02.538Z,1478877242.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:02.986Z,1478877242.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:02.000Z,1478877243.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:03.361Z,1478877243.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:03.408Z,1478877243.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:03.769Z,1478877243.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:04.153Z,1478877244.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:04.204Z,1478877244.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:04.536Z,1478877244.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:04.975Z,1478877244.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:04.000Z,1478877245.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:05.337Z,1478877245.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:05.408Z,1478877245.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:05.737Z,1478877245.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:06.137Z,1478877246.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:06.204Z,1478877246.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:06.538Z,1478877246.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:06.987Z,1478877246.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:07.000Z,1478877247.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:07.341Z,1478877247.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:07.408Z,1478877247.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:07.745Z,1478877247.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:08.181Z,1478877248.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:08.204Z,1478877248.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:08.539Z,1478877248.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:08.947Z,1478877248.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:09.001Z,1478877249.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:09.357Z,1478877249.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:09.452Z,1478877249.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:09.773Z,1478877249.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:10.138Z,1478877250.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:10.248Z,1478877250.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:10.567Z,1478877250.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:10.938Z,1478877250.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:11.044Z,1478877251.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:11.433Z,1478877251.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:11.739Z,1478877251.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:11.804Z,1478877251.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:12.175Z,1478877252.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:12.539Z,1478877252.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:12.600Z,1478877252.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:12.942Z,1478877252.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:13.381Z,1478877253.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:13.396Z,1478877253.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:13.750Z,1478877253.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:13.832Z,1478877253.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:14.135Z,1478877254.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:14.537Z,1478877254.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:14.628Z,1478877254.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:15.023Z,1478877255.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:15.370Z,1478877255.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:15.400Z,1478877255.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:15.745Z,1478877255.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:16.152Z,1478877256.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:16.196Z,1478877256.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:16.552Z,1478877256.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:16.974Z,1478877256.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:16.992Z,1478877256.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:17.336Z,1478877257.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:17.400Z,1478877257.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:17.737Z,1478877257.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:18.144Z,1478877258.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:18.196Z,1478877258.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:18.549Z,1478877258.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:18.986Z,1478877258.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:18.992Z,1478877258.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:19.342Z,1478877259.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:19.412Z,1478877259.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:19.753Z,1478877259.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:20.157Z,1478877260.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:20.208Z,1478877260.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:20.593Z,1478877260.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:20.975Z,1478877260.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:21.004Z,1478877261.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:21.337Z,1478877261.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:21.412Z,1478877261.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:21.739Z,1478877261.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:22.208Z,1478877262.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:23.005Z,1478877263.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:23.432Z,1478877263.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:24.228Z,1478877264.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:25.024Z,1478877265.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:25.145Z,1478877265.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:25.269Z,1478877265.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:25.662Z,1478877265.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:25.804Z,1478877265.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:26.059Z,1478877266.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:26.457Z,1478877266.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:26.600Z,1478877266.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:26.866Z,1478877266.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:27.241Z,1478877267.241 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:14:27.241Z,1478877267.241 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:14:27.241Z,1478877267.241 [BPC1](ERROR): Communications Fault
2016-11-11T15:14:27.274Z,1478877267.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:27.354Z,1478877267.354 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:14:27.396Z,1478877267.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:27.664Z,1478877267.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:27.804Z,1478877267.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:28.061Z,1478877268.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:28.468Z,1478877268.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:28.488Z,1478877268.488 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:14:28.488Z,1478877268.488 [BPC1] No Fault, FailCount= 1
2016-11-11T15:14:28.601Z,1478877268.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:28.971Z,1478877268.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:29.249Z,1478877269.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:29.344Z,1478877269.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:29.680Z,1478877269.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:30.054Z,1478877270.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:30.140Z,1478877270.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:30.457Z,1478877270.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:30.908Z,1478877270.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:30.936Z,1478877270.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:31.259Z,1478877271.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:31.356Z,1478877271.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:31.653Z,1478877271.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:32.057Z,1478877272.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:32.152Z,1478877272.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:32.461Z,1478877272.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:32.915Z,1478877272.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:32.948Z,1478877272.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:33.261Z,1478877273.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:33.356Z,1478877273.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:33.661Z,1478877273.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:34.063Z,1478877274.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:34.152Z,1478877274.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:34.460Z,1478877274.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:34.901Z,1478877274.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:34.948Z,1478877274.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:35.272Z,1478877275.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:35.360Z,1478877275.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:35.653Z,1478877275.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:36.049Z,1478877276.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:36.156Z,1478877276.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:36.451Z,1478877276.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:36.852Z,1478877276.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:36.953Z,1478877276.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:37.261Z,1478877277.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:37.420Z,1478877277.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:37.651Z,1478877277.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:38.061Z,1478877278.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:38.216Z,1478877278.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:38.462Z,1478877278.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:38.855Z,1478877278.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:39.012Z,1478877279.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:39.257Z,1478877279.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:39.661Z,1478877279.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:39.776Z,1478877279.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:40.061Z,1478877280.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:40.449Z,1478877280.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:40.572Z,1478877280.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:40.845Z,1478877280.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:41.249Z,1478877281.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:41.368Z,1478877281.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:41.709Z,1478877281.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:41.780Z,1478877281.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:42.049Z,1478877282.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:42.450Z,1478877282.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:42.576Z,1478877282.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:42.942Z,1478877282.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:43.252Z,1478877283.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:43.328Z,1478877283.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:43.689Z,1478877283.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:44.090Z,1478877284.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:44.124Z,1478877284.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:44.452Z,1478877284.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:44.914Z,1478877284.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:44.920Z,1478877284.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:45.251Z,1478877285.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:45.336Z,1478877285.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:45.652Z,1478877285.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:46.061Z,1478877286.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:46.132Z,1478877286.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:46.462Z,1478877286.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:46.908Z,1478877286.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:46.930Z,1478877286.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:47.267Z,1478877287.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:47.340Z,1478877287.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:47.672Z,1478877287.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:48.065Z,1478877288.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:48.136Z,1478877288.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:48.449Z,1478877288.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:48.894Z,1478877288.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:48.932Z,1478877288.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:49.251Z,1478877289.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:49.340Z,1478877289.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:49.657Z,1478877289.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:50.051Z,1478877290.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:50.136Z,1478877290.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:50.450Z,1478877290.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:50.857Z,1478877290.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:50.933Z,1478877290.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:51.269Z,1478877291.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:51.408Z,1478877291.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:51.665Z,1478877291.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:52.071Z,1478877292.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:52.204Z,1478877292.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:52.447Z,1478877292.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:52.851Z,1478877292.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:52.000Z,1478877293.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:53.251Z,1478877293.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:53.665Z,1478877293.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:53.780Z,1478877293.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:54.047Z,1478877294.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:54.451Z,1478877294.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:54.576Z,1478877294.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:54.847Z,1478877294.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:55.250Z,1478877295.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:55.374Z,1478877295.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:55.659Z,1478877295.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:55.786Z,1478877295.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:56.085Z,1478877296.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:56.486Z,1478877296.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:56.580Z,1478877296.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:56.917Z,1478877296.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:57.282Z,1478877297.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:57.292Z,1478877297.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:57.647Z,1478877297.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:58.081Z,1478877298.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:58.088Z,1478877298.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:58.486Z,1478877298.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:58.884Z,1478877298.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:58.894Z,1478877298.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:59.261Z,1478877299.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:14:59.308Z,1478877299.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:14:59.657Z,1478877299.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:00.051Z,1478877300.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:00.104Z,1478877300.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:00.468Z,1478877300.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:00.886Z,1478877300.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:00.900Z,1478877300.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:01.254Z,1478877301.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:01.308Z,1478877301.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:01.661Z,1478877301.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:02.062Z,1478877302.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:02.104Z,1478877302.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:02.454Z,1478877302.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:02.881Z,1478877302.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:02.900Z,1478877302.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:03.262Z,1478877303.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:03.320Z,1478877303.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:03.654Z,1478877303.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:04.065Z,1478877304.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:04.116Z,1478877304.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:04.464Z,1478877304.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:04.850Z,1478877304.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:04.913Z,1478877304.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:05.260Z,1478877305.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:05.388Z,1478877305.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:05.664Z,1478877305.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:06.054Z,1478877306.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:06.184Z,1478877306.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:06.461Z,1478877306.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:06.860Z,1478877306.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:06.980Z,1478877306.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:07.298Z,1478877307.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:07.652Z,1478877307.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:07.756Z,1478877307.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:08.051Z,1478877308.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:08.451Z,1478877308.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:08.552Z,1478877308.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:08.860Z,1478877308.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:09.316Z,1478877309.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:09.348Z,1478877309.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:09.657Z,1478877309.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:09.768Z,1478877309.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:10.052Z,1478877310.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:10.517Z,1478877310.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:10.564Z,1478877310.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:10.870Z,1478877310.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:11.258Z,1478877311.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:11.296Z,1478877311.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:11.677Z,1478877311.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:12.052Z,1478877312.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:12.092Z,1478877312.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:12.481Z,1478877312.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:12.887Z,1478877312.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:12.888Z,1478877312.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:13.244Z,1478877313.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:13.296Z,1478877313.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:13.653Z,1478877313.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:14.049Z,1478877314.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:14.092Z,1478877314.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:14.452Z,1478877314.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:14.871Z,1478877314.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:14.888Z,1478877314.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:15.257Z,1478877315.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:15.296Z,1478877315.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:15.654Z,1478877315.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:16.092Z,1478877316.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:16.113Z,1478877316.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:16.464Z,1478877316.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:16.874Z,1478877316.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:16.888Z,1478877316.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:17.261Z,1478877317.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:17.304Z,1478877317.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:17.671Z,1478877317.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:18.044Z,1478877318.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:18.100Z,1478877318.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:18.449Z,1478877318.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:18.853Z,1478877318.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:18.896Z,1478877318.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:19.252Z,1478877319.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:19.372Z,1478877319.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:19.655Z,1478877319.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:20.057Z,1478877320.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:20.168Z,1478877320.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:20.456Z,1478877320.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:20.853Z,1478877320.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:20.964Z,1478877320.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:21.310Z,1478877321.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:21.649Z,1478877321.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:21.752Z,1478877321.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:22.058Z,1478877322.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:22.548Z,1478877322.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:23.344Z,1478877323.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:23.752Z,1478877323.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:24.548Z,1478877324.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:25.232Z,1478877325.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:25.662Z,1478877325.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:25.817Z,1478877325.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:26.028Z,1478877326.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:26.169Z,1478877326.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:26.586Z,1478877326.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:26.824Z,1478877326.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:26.974Z,1478877326.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:27.232Z,1478877327.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:27.393Z,1478877327.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:27.786Z,1478877327.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:28.028Z,1478877328.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:28.174Z,1478877328.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:28.554Z,1478877328.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:28.824Z,1478877328.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:28.985Z,1478877328.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:29.233Z,1478877329.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:29.365Z,1478877329.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:29.768Z,1478877329.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:30.028Z,1478877330.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:30.162Z,1478877330.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:30.563Z,1478877330.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:30.824Z,1478877330.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:30.970Z,1478877330.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:31.232Z,1478877331.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:31.364Z,1478877331.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:31.770Z,1478877331.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:32.028Z,1478877332.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:32.173Z,1478877332.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:32.564Z,1478877332.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:32.824Z,1478877332.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:32.989Z,1478877332.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:33.312Z,1478877333.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:33.373Z,1478877333.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:33.774Z,1478877333.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:34.108Z,1478877334.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:34.169Z,1478877334.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:34.577Z,1478877334.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:34.904Z,1478877334.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:34.960Z,1478877334.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:35.362Z,1478877335.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:35.668Z,1478877335.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:35.761Z,1478877335.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:36.161Z,1478877336.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:36.464Z,1478877336.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:36.577Z,1478877336.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:36.979Z,1478877336.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:37.261Z,1478877337.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:37.384Z,1478877337.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:37.672Z,1478877337.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:37.775Z,1478877337.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:38.168Z,1478877338.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:38.468Z,1478877338.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:38.567Z,1478877338.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:38.956Z,1478877338.956 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T15:15:38.956Z,1478877338.957 [BPC1] Data Fault, FailCount= 1
2016-11-11T15:15:38.956Z,1478877338.957 [BPC1](ERROR): Data Fault
2016-11-11T15:15:38.965Z,1478877338.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:38.985Z,1478877338.985 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T15:15:39.188Z,1478877339.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:39.373Z,1478877339.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:39.773Z,1478877339.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:39.984Z,1478877339.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:40.177Z,1478877340.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:40.205Z,1478877340.205 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:15:40.205Z,1478877340.205 [BPC1] No Fault, FailCount= 1
2016-11-11T15:15:40.642Z,1478877340.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:40.780Z,1478877340.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:40.998Z,1478877340.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:41.188Z,1478877341.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:41.369Z,1478877341.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:41.776Z,1478877341.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:41.985Z,1478877341.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:42.200Z,1478877342.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:42.577Z,1478877342.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:42.780Z,1478877342.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:42.971Z,1478877342.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:43.188Z,1478877343.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:43.376Z,1478877343.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:43.772Z,1478877343.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:43.984Z,1478877343.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:44.174Z,1478877344.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:44.572Z,1478877344.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:44.780Z,1478877344.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:44.970Z,1478877344.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:45.188Z,1478877345.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:45.380Z,1478877345.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:45.769Z,1478877345.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:45.984Z,1478877345.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:46.170Z,1478877346.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:46.571Z,1478877346.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:46.780Z,1478877346.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:46.971Z,1478877346.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:47.280Z,1478877347.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:47.372Z,1478877347.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:47.766Z,1478877347.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:48.076Z,1478877348.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:48.169Z,1478877348.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:48.572Z,1478877348.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:48.872Z,1478877348.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:48.974Z,1478877348.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:49.375Z,1478877349.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:49.640Z,1478877349.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:49.769Z,1478877349.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:50.183Z,1478877350.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:50.436Z,1478877350.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:50.554Z,1478877350.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:50.955Z,1478877350.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:51.232Z,1478877351.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:51.385Z,1478877351.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:51.640Z,1478877351.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:15:51.762Z,1478877351.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:52.157Z,1478877352.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:52.589Z,1478877352.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:52.969Z,1478877352.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:53.437Z,1478877353.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:53.790Z,1478877353.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:54.184Z,1478877354.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:54.593Z,1478877354.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:54.980Z,1478877354.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:55.397Z,1478877355.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:55.754Z,1478877355.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:56.189Z,1478877356.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:56.584Z,1478877356.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:56.984Z,1478877356.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:57.390Z,1478877357.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:57.769Z,1478877357.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:58.168Z,1478877358.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:58.571Z,1478877358.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:59.015Z,1478877359.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:59.367Z,1478877359.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:15:59.770Z,1478877359.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:00.167Z,1478877360.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:00.572Z,1478877360.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:00.976Z,1478877360.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:01.372Z,1478877361.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:01.392Z,1478877361.392 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T15:16:01.772Z,1478877361.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:02.174Z,1478877362.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:02.572Z,1478877362.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:02.966Z,1478877362.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:03.377Z,1478877363.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:03.754Z,1478877363.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:04.177Z,1478877364.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:04.558Z,1478877364.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:04.972Z,1478877364.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:05.362Z,1478877365.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:05.773Z,1478877365.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:06.162Z,1478877366.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:06.566Z,1478877366.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:06.973Z,1478877366.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:07.367Z,1478877367.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:07.802Z,1478877367.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:08.201Z,1478877368.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:08.574Z,1478877368.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:09.011Z,1478877369.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:09.373Z,1478877369.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:09.794Z,1478877369.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:10.240Z,1478877370.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:10.582Z,1478877370.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:10.976Z,1478877370.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:11.365Z,1478877371.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:11.781Z,1478877371.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:12.162Z,1478877372.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:12.561Z,1478877372.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:12.966Z,1478877372.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:13.368Z,1478877373.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:13.779Z,1478877373.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:14.213Z,1478877374.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:14.568Z,1478877374.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:14.981Z,1478877374.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:15.383Z,1478877375.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:15.818Z,1478877375.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:16.172Z,1478877376.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:16.571Z,1478877376.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:16.966Z,1478877376.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:17.366Z,1478877377.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:17.763Z,1478877377.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:18.173Z,1478877378.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:18.562Z,1478877378.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:18.969Z,1478877378.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:19.365Z,1478877379.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:19.767Z,1478877379.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:20.172Z,1478877380.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:20.570Z,1478877380.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:20.969Z,1478877380.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:21.367Z,1478877381.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:21.375Z,1478877381.375 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T15:16:21.376Z,1478877381.376 [Default:CheckIn:C.Wait] Stopped
2016-11-11T15:16:21.376Z,1478877381.376 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T15:16:21.376Z,1478877381.376 [Default:CheckIn:D] Running Loop=1
2016-11-11T15:16:21.777Z,1478877381.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:21.785Z,1478877381.785 [Default:CheckIn:D] Stopped
2016-11-11T15:16:21.785Z,1478877381.785 [Default:CheckIn:E] Running Loop=1
2016-11-11T15:16:22.201Z,1478877382.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:22.223Z,1478877382.223 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 626.341276 min 
2016-11-11T15:16:22.223Z,1478877382.224 [Default:CheckIn:E] Stopped
2016-11-11T15:16:22.224Z,1478877382.224 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T15:16:22.224Z,1478877382.224 [Default:CheckIn] Stopped
2016-11-11T15:16:22.224Z,1478877382.224 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T15:16:22.224Z,1478877382.224 [Default:CheckIn](INFO): Running loop #61
2016-11-11T15:16:22.224Z,1478877382.224 [Default:CheckIn] Running Loop=61
2016-11-11T15:16:22.224Z,1478877382.224 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T15:16:22.225Z,1478877382.224 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T15:16:25.637Z,1478877385.637 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:16:25.637Z,1478877385.637 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:16:25.637Z,1478877385.637 [BPC1](ERROR): Communications Fault
2016-11-11T15:16:25.645Z,1478877385.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:25.724Z,1478877385.724 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:16:25.737Z,1478877385.737 [NAL9602](INFO): Powering up
2016-11-11T15:16:25.799Z,1478877385.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:25.940Z,1478877385.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:26.183Z,1478877386.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:26.583Z,1478877386.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:26.603Z,1478877386.603 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:16:26.603Z,1478877386.603 [BPC1] No Fault, FailCount= 1
2016-11-11T15:16:26.736Z,1478877386.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:27.081Z,1478877387.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:27.144Z,1478877387.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:27.389Z,1478877387.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:27.793Z,1478877387.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:27.940Z,1478877387.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:28.181Z,1478877388.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:28.585Z,1478877388.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:28.736Z,1478877388.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:28.998Z,1478877388.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:29.216Z,1478877389.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:29.388Z,1478877389.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:29.807Z,1478877389.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:30.012Z,1478877390.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:30.197Z,1478877390.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:30.596Z,1478877390.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:30.808Z,1478877390.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:31.029Z,1478877391.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:31.385Z,1478877391.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:31.781Z,1478877391.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:32.193Z,1478877392.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:32.617Z,1478877392.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:32.986Z,1478877392.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:33.395Z,1478877393.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:33.793Z,1478877393.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:34.199Z,1478877394.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:34.599Z,1478877394.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:35.000Z,1478877395.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:35.377Z,1478877395.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:35.777Z,1478877395.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:36.183Z,1478877396.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:36.537Z,1478877396.537 [NAL9602](INFO): NAL9602 initialized
2016-11-11T15:16:36.589Z,1478877396.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:36.987Z,1478877396.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:37.343Z,1478877397.343 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T15:16:37.343Z,1478877397.343 [NAL9602] Data Fault, FailCount= 3
2016-11-11T15:16:37.343Z,1478877397.343 [NAL9602](ERROR): Data Fault
2016-11-11T15:16:37.399Z,1478877397.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:37.443Z,1478877397.443 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T15:16:37.737Z,1478877397.737 [NAL9602](INFO): Powering down
2016-11-11T15:16:37.789Z,1478877397.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:38.188Z,1478877398.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:38.595Z,1478877398.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:38.618Z,1478877398.618 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T15:16:38.618Z,1478877398.618 [NAL9602] No Fault, FailCount= 3
2016-11-11T15:16:39.000Z,1478877399.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:39.377Z,1478877399.377 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:39.377Z,1478877399.377 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 189
2016-11-11T15:16:39.377Z,1478877399.377 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:16:39.384Z,1478877399.384 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:39.384Z,1478877399.384 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 189
2016-11-11T15:16:39.384Z,1478877399.384 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:16:39.386Z,1478877399.386 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:39.386Z,1478877399.386 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 189
2016-11-11T15:16:39.386Z,1478877399.386 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:16:39.455Z,1478877399.455 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:16:39.456Z,1478877399.456 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:16:39.456Z,1478877399.456 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:16:39.837Z,1478877399.838 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:16:39.838Z,1478877399.838 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 189
2016-11-11T15:16:39.838Z,1478877399.838 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:16:39.838Z,1478877399.838 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 189
2016-11-11T15:16:39.847Z,1478877399.847 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:16:39.847Z,1478877399.847 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 189
2016-11-11T15:16:39.920Z,1478877399.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:40.180Z,1478877400.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:16:40.181Z,1478877400.181 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:16:40.181Z,1478877400.181 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:16:40.186Z,1478877400.186 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:16:40.186Z,1478877400.186 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:16:40.186Z,1478877400.186 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:16:40.187Z,1478877400.187 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:16:40.188Z,1478877400.188 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:16:40.188Z,1478877400.188 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:16:40.584Z,1478877400.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:40.716Z,1478877400.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:40.994Z,1478877400.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:41.124Z,1478877401.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:41.384Z,1478877401.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:41.810Z,1478877401.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:41.921Z,1478877401.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:42.191Z,1478877402.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:42.570Z,1478877402.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:42.716Z,1478877402.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:42.952Z,1478877402.952 [NAL9602](INFO): Powering up NAL9602
2016-11-11T15:16:43.013Z,1478877403.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:43.196Z,1478877403.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:43.403Z,1478877403.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:43.821Z,1478877403.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:43.993Z,1478877403.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:44.210Z,1478877404.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:44.580Z,1478877404.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:44.788Z,1478877404.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:44.982Z,1478877404.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:45.395Z,1478877405.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:45.556Z,1478877405.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:45.779Z,1478877405.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:46.189Z,1478877406.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:46.352Z,1478877406.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:46.590Z,1478877406.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:46.000Z,1478877407.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:47.148Z,1478877407.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:47.437Z,1478877407.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:47.556Z,1478877407.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:47.799Z,1478877407.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:48.197Z,1478877408.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:48.352Z,1478877408.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:48.598Z,1478877408.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:49.044Z,1478877409.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:49.120Z,1478877409.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:49.404Z,1478877409.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:49.781Z,1478877409.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:49.916Z,1478877409.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:50.185Z,1478877410.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:50.641Z,1478877410.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:50.712Z,1478877410.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:50.998Z,1478877410.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:51.120Z,1478877411.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:51.395Z,1478877411.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:51.791Z,1478877411.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:51.916Z,1478877411.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:52.178Z,1478877412.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:52.588Z,1478877412.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:52.712Z,1478877412.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:53.000Z,1478877413.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:53.120Z,1478877413.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:53.394Z,1478877413.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:53.800Z,1478877413.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:53.916Z,1478877413.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:54.137Z,1478877414.137 [NAL9602](INFO): NAL9602 initialized
2016-11-11T15:16:54.174Z,1478877414.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:54.666Z,1478877414.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:54.712Z,1478877414.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:55.001Z,1478877415.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:55.120Z,1478877415.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:55.426Z,1478877415.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:55.797Z,1478877415.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:55.917Z,1478877415.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:56.209Z,1478877416.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:56.595Z,1478877416.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:56.713Z,1478877416.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:57.037Z,1478877417.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:57.172Z,1478877417.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:57.394Z,1478877417.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:57.818Z,1478877417.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:57.968Z,1478877417.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:58.233Z,1478877418.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:58.594Z,1478877418.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:58.764Z,1478877418.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:59.002Z,1478877419.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:59.389Z,1478877419.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:16:59.536Z,1478877419.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:16:59.793Z,1478877419.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:00.225Z,1478877420.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:00.332Z,1478877420.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:00.586Z,1478877420.586 [PNI_TCM](ERROR): CRC does not match. Expected:0x41331 got:0x80
2016-11-11T15:17:00.620Z,1478877420.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:00.993Z,1478877420.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:01.128Z,1478877421.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:01.381Z,1478877421.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:01.536Z,1478877421.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:01.805Z,1478877421.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:02.183Z,1478877422.183 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T15:17:02.226Z,1478877422.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:02.332Z,1478877422.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:02.633Z,1478877422.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:03.006Z,1478877423.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:03.108Z,1478877423.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:03.406Z,1478877423.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:03.803Z,1478877423.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:03.904Z,1478877423.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:04.173Z,1478877424.173 [PNI_TCM](ERROR): CRC does not match. Expected:0x57606 got:0x0
2016-11-11T15:17:04.197Z,1478877424.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:04.622Z,1478877424.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:04.700Z,1478877424.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:05.009Z,1478877425.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:05.108Z,1478877425.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:05.394Z,1478877425.395 [PNI_TCM](ERROR): CRC does not match. Expected:0x21232 got:0x59008
2016-11-11T15:17:05.433Z,1478877425.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:05.784Z,1478877425.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:05.904Z,1478877425.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:06.193Z,1478877426.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:06.634Z,1478877426.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:06.700Z,1478877426.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:06.978Z,1478877426.978 [PNI_TCM](ERROR): CRC does not match. Expected:0x10857 got:0x16913
2016-11-11T15:17:07.001Z,1478877427.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:07.108Z,1478877427.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:07.401Z,1478877427.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:07.801Z,1478877427.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:07.904Z,1478877427.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:08.204Z,1478877428.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:08.650Z,1478877428.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:08.700Z,1478877428.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:09.005Z,1478877429.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:09.108Z,1478877429.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:09.385Z,1478877429.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:09.797Z,1478877429.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:10.174Z,1478877430.174 [PNI_TCM](ERROR): CRC does not match. Expected:0x60308 got:0x5639
2016-11-11T15:17:10.217Z,1478877430.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:10.618Z,1478877430.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:10.990Z,1478877430.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:11.420Z,1478877431.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:11.772Z,1478877431.772 [PNI_TCM](ERROR): CRC does not match. Expected:0x58480 got:0x8733
2016-11-11T15:17:11.797Z,1478877431.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:12.206Z,1478877432.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:12.629Z,1478877432.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:13.005Z,1478877433.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:13.396Z,1478877433.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:13.801Z,1478877433.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:14.197Z,1478877434.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:14.625Z,1478877434.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:15.030Z,1478877435.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:15.414Z,1478877435.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:15.791Z,1478877435.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:16.201Z,1478877436.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:16.597Z,1478877436.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:16.997Z,1478877436.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:17.408Z,1478877437.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:17.808Z,1478877437.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:18.205Z,1478877438.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:18.663Z,1478877438.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:18.998Z,1478877438.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:19.410Z,1478877439.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:19.798Z,1478877439.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:20.191Z,1478877440.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:20.650Z,1478877440.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:20.996Z,1478877440.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:21.402Z,1478877441.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:21.779Z,1478877441.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:22.190Z,1478877442.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:26.357Z,1478877446.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:26.497Z,1478877446.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:26.901Z,1478877446.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:27.262Z,1478877447.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:27.705Z,1478877447.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:28.082Z,1478877448.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:28.473Z,1478877448.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:28.905Z,1478877448.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:29.257Z,1478877449.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:29.673Z,1478877449.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:30.046Z,1478877450.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:30.484Z,1478877450.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:30.846Z,1478877450.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:31.282Z,1478877451.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:31.690Z,1478877451.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:32.078Z,1478877452.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:32.474Z,1478877452.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:32.873Z,1478877452.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:33.266Z,1478877453.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:33.654Z,1478877453.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:34.065Z,1478877454.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:34.464Z,1478877454.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:34.881Z,1478877454.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:35.287Z,1478877455.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:35.660Z,1478877455.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:36.078Z,1478877456.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:36.477Z,1478877456.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:36.864Z,1478877456.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:37.279Z,1478877457.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:37.688Z,1478877457.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:38.061Z,1478877458.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:38.489Z,1478877458.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:38.861Z,1478877458.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:39.269Z,1478877459.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:39.669Z,1478877459.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:40.049Z,1478877460.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:40.453Z,1478877460.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:40.881Z,1478877460.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:41.248Z,1478877461.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:41.693Z,1478877461.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:42.089Z,1478877462.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:42.463Z,1478877462.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:42.865Z,1478877462.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:43.290Z,1478877463.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:43.648Z,1478877463.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:44.053Z,1478877464.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:44.444Z,1478877464.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:44.848Z,1478877464.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:45.250Z,1478877465.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:45.648Z,1478877465.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:46.048Z,1478877466.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:46.453Z,1478877466.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:46.863Z,1478877466.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:47.262Z,1478877467.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:47.665Z,1478877467.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:48.059Z,1478877468.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:48.484Z,1478877468.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:48.854Z,1478877468.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:49.249Z,1478877469.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:49.644Z,1478877469.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:50.053Z,1478877470.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:50.461Z,1478877470.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:50.850Z,1478877470.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:51.250Z,1478877471.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:51.654Z,1478877471.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:52.058Z,1478877472.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:52.468Z,1478877472.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:52.885Z,1478877472.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:53.269Z,1478877473.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:53.653Z,1478877473.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:53.764Z,1478877473.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:54.074Z,1478877474.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:54.473Z,1478877474.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:54.560Z,1478877474.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:54.884Z,1478877474.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:55.249Z,1478877475.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:55.356Z,1478877475.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:55.681Z,1478877475.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:56.096Z,1478877476.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:56.152Z,1478877476.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:56.454Z,1478877476.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:56.849Z,1478877476.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:56.948Z,1478877476.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:57.267Z,1478877477.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:57.660Z,1478877477.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:57.744Z,1478877477.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:17:58.083Z,1478877478.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:58.456Z,1478877478.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:58.848Z,1478877478.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:59.244Z,1478877479.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:17:59.653Z,1478877479.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:00.054Z,1478877480.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:00.474Z,1478877480.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:00.850Z,1478877480.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:01.290Z,1478877481.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:01.663Z,1478877481.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:02.063Z,1478877482.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:02.479Z,1478877482.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:02.871Z,1478877482.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:03.283Z,1478877483.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:03.666Z,1478877483.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:04.057Z,1478877484.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:04.483Z,1478877484.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:04.874Z,1478877484.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:05.267Z,1478877485.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:05.684Z,1478877485.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:06.067Z,1478877486.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:06.485Z,1478877486.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:06.864Z,1478877486.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:07.282Z,1478877487.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:07.670Z,1478877487.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:08.083Z,1478877488.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:08.510Z,1478877488.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:08.887Z,1478877488.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:09.273Z,1478877489.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:09.672Z,1478877489.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:10.085Z,1478877490.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:10.478Z,1478877490.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:10.875Z,1478877490.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:11.260Z,1478877491.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:11.658Z,1478877491.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:12.054Z,1478877492.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:12.459Z,1478877492.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:12.884Z,1478877492.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:13.275Z,1478877493.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:13.673Z,1478877493.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:14.069Z,1478877494.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:14.458Z,1478877494.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:14.894Z,1478877494.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:15.272Z,1478877495.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:15.655Z,1478877495.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:16.063Z,1478877496.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:16.466Z,1478877496.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:16.869Z,1478877496.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:17.261Z,1478877497.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:17.669Z,1478877497.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:18.071Z,1478877498.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:18.518Z,1478877498.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:18.864Z,1478877498.864 [PNI_TCM](ERROR): CRC does not match. Expected:0x25186 got:0x59072
2016-11-11T15:18:18.889Z,1478877498.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:19.266Z,1478877499.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:19.668Z,1478877499.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:20.077Z,1478877500.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:20.467Z,1478877500.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:20.847Z,1478877500.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:21.264Z,1478877501.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:21.693Z,1478877501.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:22.054Z,1478877502.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:22.489Z,1478877502.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:26.071Z,1478877506.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:26.209Z,1478877506.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:26.595Z,1478877506.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:27.005Z,1478877507.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:27.413Z,1478877507.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:27.833Z,1478877507.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:28.205Z,1478877508.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:28.629Z,1478877508.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:29.001Z,1478877509.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:29.405Z,1478877509.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:29.793Z,1478877509.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:30.177Z,1478877510.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:30.593Z,1478877510.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:30.997Z,1478877510.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:31.400Z,1478877511.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:31.799Z,1478877511.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:32.197Z,1478877512.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:32.597Z,1478877512.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:32.985Z,1478877512.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:33.385Z,1478877513.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:33.783Z,1478877513.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:34.182Z,1478877514.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:34.636Z,1478877514.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:34.969Z,1478877514.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:35.064Z,1478877515.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:18:35.396Z,1478877515.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:35.785Z,1478877515.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:35.860Z,1478877515.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:18:36.209Z,1478877516.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:36.592Z,1478877516.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:37.028Z,1478877517.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:37.390Z,1478877517.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:37.784Z,1478877517.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:38.181Z,1478877518.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:38.569Z,1478877518.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:39.058Z,1478877519.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:39.402Z,1478877519.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:39.780Z,1478877519.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:40.213Z,1478877520.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:40.605Z,1478877520.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:41.022Z,1478877521.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:41.416Z,1478877521.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:41.789Z,1478877521.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:42.225Z,1478877522.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:42.633Z,1478877522.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:42.984Z,1478877522.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:43.386Z,1478877523.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:43.797Z,1478877523.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:44.205Z,1478877524.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:44.624Z,1478877524.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:44.978Z,1478877524.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:45.395Z,1478877525.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:45.791Z,1478877525.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:46.209Z,1478877526.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:46.614Z,1478877526.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:47.002Z,1478877527.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:47.400Z,1478877527.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:47.795Z,1478877527.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:48.182Z,1478877528.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:48.654Z,1478877528.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:48.983Z,1478877528.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:49.044Z,1478877529.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:18:49.395Z,1478877529.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:49.779Z,1478877529.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:49.840Z,1478877529.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:18:50.190Z,1478877530.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:50.594Z,1478877530.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:51.022Z,1478877531.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:51.394Z,1478877531.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:51.801Z,1478877531.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:52.209Z,1478877532.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:52.593Z,1478877532.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:53.020Z,1478877533.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:53.386Z,1478877533.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:53.791Z,1478877533.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:54.192Z,1478877534.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:54.585Z,1478877534.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:55.025Z,1478877535.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:55.393Z,1478877535.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:55.768Z,1478877535.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:56.184Z,1478877536.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:56.586Z,1478877536.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:56.993Z,1478877536.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:57.425Z,1478877537.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:57.787Z,1478877537.787 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:18:57.787Z,1478877537.787 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:18:57.787Z,1478877537.787 [BPC1](ERROR): Communications Fault
2016-11-11T15:18:57.823Z,1478877537.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:57.873Z,1478877537.873 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:18:58.196Z,1478877538.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:58.588Z,1478877538.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:58.989Z,1478877538.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:59.009Z,1478877539.009 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:18:59.009Z,1478877539.009 [BPC1] No Fault, FailCount= 1
2016-11-11T15:18:59.437Z,1478877539.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:18:59.789Z,1478877539.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:00.206Z,1478877540.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:00.607Z,1478877540.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:01.026Z,1478877541.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:01.378Z,1478877541.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:01.801Z,1478877541.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:02.205Z,1478877542.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:02.666Z,1478877542.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:03.010Z,1478877543.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:03.389Z,1478877543.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:03.780Z,1478877543.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:04.191Z,1478877544.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:04.581Z,1478877544.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:04.990Z,1478877544.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:05.386Z,1478877545.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:05.789Z,1478877545.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:06.193Z,1478877546.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:06.585Z,1478877546.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:07.003Z,1478877547.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:07.391Z,1478877547.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:07.793Z,1478877547.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:08.201Z,1478877548.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:08.592Z,1478877548.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:08.996Z,1478877548.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:09.400Z,1478877549.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:09.777Z,1478877549.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:10.179Z,1478877550.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:10.582Z,1478877550.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:10.979Z,1478877550.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:11.385Z,1478877551.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:11.794Z,1478877551.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:12.245Z,1478877552.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:12.601Z,1478877552.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:13.013Z,1478877553.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:13.398Z,1478877553.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:13.857Z,1478877553.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:14.193Z,1478877554.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:14.617Z,1478877554.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:14.992Z,1478877554.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:15.393Z,1478877555.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:15.791Z,1478877555.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:16.181Z,1478877556.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:16.602Z,1478877556.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:16.993Z,1478877556.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:17.405Z,1478877557.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:17.791Z,1478877557.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:18.199Z,1478877558.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:18.621Z,1478877558.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:19.014Z,1478877559.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:19.397Z,1478877559.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:19.795Z,1478877559.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:20.181Z,1478877560.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:20.577Z,1478877560.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:21.001Z,1478877561.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:21.391Z,1478877561.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:21.784Z,1478877561.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:22.189Z,1478877562.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:22.590Z,1478877562.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:25.988Z,1478877565.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:26.137Z,1478877566.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:26.526Z,1478877566.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:26.881Z,1478877566.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:27.291Z,1478877567.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:27.669Z,1478877567.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:28.086Z,1478877568.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:28.468Z,1478877568.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:28.890Z,1478877568.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:29.269Z,1478877569.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:29.668Z,1478877569.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:30.075Z,1478877570.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:30.515Z,1478877570.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:30.871Z,1478877570.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:31.270Z,1478877571.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:31.666Z,1478877571.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:32.067Z,1478877572.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:32.463Z,1478877572.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:32.928Z,1478877572.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:33.272Z,1478877573.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:33.673Z,1478877573.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:34.073Z,1478877574.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:34.472Z,1478877574.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:34.928Z,1478877574.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:35.264Z,1478877575.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:35.656Z,1478877575.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:36.073Z,1478877576.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:36.488Z,1478877576.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:36.877Z,1478877576.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:37.273Z,1478877577.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:37.669Z,1478877577.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:38.062Z,1478877578.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:38.480Z,1478877578.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:38.870Z,1478877578.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:39.269Z,1478877579.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:39.673Z,1478877579.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:40.063Z,1478877580.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:40.513Z,1478877580.513 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:40.513Z,1478877580.513 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 190
2016-11-11T15:19:40.513Z,1478877580.513 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:19:40.524Z,1478877580.524 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:40.525Z,1478877580.524 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 190
2016-11-11T15:19:40.525Z,1478877580.525 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:19:40.527Z,1478877580.527 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:40.527Z,1478877580.527 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 190
2016-11-11T15:19:40.527Z,1478877580.527 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:19:40.554Z,1478877580.554 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:19:40.554Z,1478877580.554 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:19:40.554Z,1478877580.554 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:19:40.930Z,1478877580.930 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:19:40.930Z,1478877580.930 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 190
2016-11-11T15:19:40.935Z,1478877580.935 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:19:40.935Z,1478877580.935 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 190
2016-11-11T15:19:40.936Z,1478877580.936 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:19:40.936Z,1478877580.936 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 190
2016-11-11T15:19:41.282Z,1478877581.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:19:41.282Z,1478877581.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:19:41.282Z,1478877581.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:19:41.287Z,1478877581.287 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:19:41.287Z,1478877581.287 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:19:41.288Z,1478877581.288 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:19:41.288Z,1478877581.288 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:19:41.289Z,1478877581.289 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:19:41.289Z,1478877581.289 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:19:41.693Z,1478877581.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:42.084Z,1478877582.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:42.515Z,1478877582.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:42.885Z,1478877582.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:43.280Z,1478877583.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:43.657Z,1478877583.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:44.064Z,1478877584.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:44.513Z,1478877584.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:44.860Z,1478877584.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:45.264Z,1478877585.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:45.663Z,1478877585.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:46.062Z,1478877586.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:46.475Z,1478877586.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:46.905Z,1478877586.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:47.276Z,1478877587.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:47.681Z,1478877587.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:48.068Z,1478877588.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:48.477Z,1478877588.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:48.888Z,1478877588.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:49.278Z,1478877589.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:49.675Z,1478877589.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:50.071Z,1478877590.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:50.477Z,1478877590.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:50.875Z,1478877590.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:51.261Z,1478877591.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:51.668Z,1478877591.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:52.072Z,1478877592.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:52.485Z,1478877592.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:52.882Z,1478877592.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:53.270Z,1478877593.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:53.663Z,1478877593.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:54.069Z,1478877594.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:54.478Z,1478877594.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:54.897Z,1478877594.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:55.297Z,1478877595.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:55.676Z,1478877595.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:56.089Z,1478877596.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:56.465Z,1478877596.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:56.903Z,1478877596.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:57.310Z,1478877597.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:57.667Z,1478877597.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:58.075Z,1478877598.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:58.520Z,1478877598.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:58.872Z,1478877598.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:59.273Z,1478877599.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:19:59.672Z,1478877599.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:00.073Z,1478877600.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:00.477Z,1478877600.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:00.890Z,1478877600.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:01.265Z,1478877601.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:01.659Z,1478877601.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:02.067Z,1478877602.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:02.475Z,1478877602.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:02.903Z,1478877602.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:03.280Z,1478877603.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:03.669Z,1478877603.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:04.069Z,1478877604.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:04.468Z,1478877604.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:04.869Z,1478877604.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:05.269Z,1478877605.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:05.665Z,1478877605.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:06.069Z,1478877606.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:06.476Z,1478877606.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:06.869Z,1478877606.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:07.281Z,1478877607.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:07.685Z,1478877607.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:08.084Z,1478877608.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:08.491Z,1478877608.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:08.933Z,1478877608.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:09.260Z,1478877609.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:09.664Z,1478877609.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:10.097Z,1478877610.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:10.473Z,1478877610.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:10.898Z,1478877610.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:11.298Z,1478877611.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:11.670Z,1478877611.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:12.064Z,1478877612.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:12.520Z,1478877612.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:12.879Z,1478877612.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:13.283Z,1478877613.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:13.674Z,1478877613.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:14.072Z,1478877614.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:14.473Z,1478877614.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:14.888Z,1478877614.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:15.265Z,1478877615.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:15.661Z,1478877615.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:16.065Z,1478877616.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:16.459Z,1478877616.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:16.866Z,1478877616.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:17.260Z,1478877617.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:17.685Z,1478877617.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:18.073Z,1478877618.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:18.481Z,1478877618.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:18.875Z,1478877618.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:19.273Z,1478877619.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:19.667Z,1478877619.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:20.068Z,1478877620.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:20.469Z,1478877620.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:20.869Z,1478877620.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:21.268Z,1478877621.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:21.669Z,1478877621.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:22.081Z,1478877622.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:22.462Z,1478877622.462 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T15:20:22.462Z,1478877622.462 [BPC1] Data Fault, FailCount= 1
2016-11-11T15:20:22.462Z,1478877622.462 [BPC1](ERROR): Data Fault
2016-11-11T15:20:22.471Z,1478877622.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:22.491Z,1478877622.491 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T15:20:22.886Z,1478877622.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:26.226Z,1478877626.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:26.347Z,1478877626.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:26.444Z,1478877626.444 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:20:26.444Z,1478877626.444 [BPC1] No Fault, FailCount= 1
2016-11-11T15:20:26.779Z,1478877626.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:27.130Z,1478877627.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:27.508Z,1478877627.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:27.902Z,1478877627.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:28.309Z,1478877628.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:28.702Z,1478877628.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:29.109Z,1478877629.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:29.505Z,1478877629.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:29.909Z,1478877629.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:30.024Z,1478877630.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:20:30.309Z,1478877630.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:30.715Z,1478877630.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:30.820Z,1478877630.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:20:31.119Z,1478877631.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:31.232Z,1478877631.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:20:31.522Z,1478877631.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:31.921Z,1478877631.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:32.389Z,1478877632.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:32.693Z,1478877632.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:33.097Z,1478877633.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:33.498Z,1478877633.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:33.905Z,1478877633.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:34.362Z,1478877634.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:34.701Z,1478877634.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:35.102Z,1478877635.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:35.506Z,1478877635.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:35.914Z,1478877635.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:36.334Z,1478877636.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:36.717Z,1478877636.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:37.114Z,1478877637.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:37.513Z,1478877637.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:37.914Z,1478877637.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:38.333Z,1478877638.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:38.697Z,1478877638.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:39.173Z,1478877639.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:39.505Z,1478877639.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:39.636Z,1478877639.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:20:39.946Z,1478877639.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:40.300Z,1478877640.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:40.432Z,1478877640.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:20:40.748Z,1478877640.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:40.840Z,1478877640.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:20:41.118Z,1478877641.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:41.550Z,1478877641.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:41.924Z,1478877641.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:42.317Z,1478877642.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:42.758Z,1478877642.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:43.096Z,1478877643.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:43.505Z,1478877643.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:43.899Z,1478877643.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:44.305Z,1478877644.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:44.699Z,1478877644.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:45.111Z,1478877645.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:45.501Z,1478877645.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:45.909Z,1478877645.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:46.348Z,1478877646.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:46.715Z,1478877646.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:47.107Z,1478877647.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:47.534Z,1478877647.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:47.900Z,1478877647.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:48.333Z,1478877648.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:48.709Z,1478877648.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:49.117Z,1478877649.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:49.497Z,1478877649.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:49.896Z,1478877649.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:50.346Z,1478877650.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:50.709Z,1478877650.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:51.104Z,1478877651.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:51.507Z,1478877651.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:51.917Z,1478877651.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:52.341Z,1478877652.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:52.722Z,1478877652.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:53.109Z,1478877653.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:53.561Z,1478877653.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:53.913Z,1478877653.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:54.322Z,1478877654.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:54.709Z,1478877654.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:55.132Z,1478877655.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:55.529Z,1478877655.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:55.636Z,1478877655.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:20:55.900Z,1478877655.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:56.304Z,1478877656.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:56.432Z,1478877656.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:20:56.760Z,1478877656.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:57.116Z,1478877657.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:57.515Z,1478877657.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:57.918Z,1478877657.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:58.314Z,1478877658.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:58.753Z,1478877658.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:59.109Z,1478877659.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:59.509Z,1478877659.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:20:59.910Z,1478877659.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:00.348Z,1478877660.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:00.702Z,1478877660.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:01.102Z,1478877661.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:01.514Z,1478877661.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:01.915Z,1478877661.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:02.344Z,1478877662.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:02.729Z,1478877662.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:03.121Z,1478877663.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:03.521Z,1478877663.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:03.897Z,1478877663.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:04.346Z,1478877664.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:04.705Z,1478877664.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:05.105Z,1478877665.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:05.502Z,1478877665.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:05.904Z,1478877665.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:06.317Z,1478877666.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:06.757Z,1478877666.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:07.161Z,1478877667.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:07.536Z,1478877667.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:07.538Z,1478877667.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:07.905Z,1478877667.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:08.333Z,1478877668.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:08.343Z,1478877668.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:08.741Z,1478877668.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:08.812Z,1478877668.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:09.104Z,1478877669.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:09.549Z,1478877669.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:09.608Z,1478877669.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:09.905Z,1478877669.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:10.341Z,1478877670.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:10.404Z,1478877670.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:10.752Z,1478877670.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:11.107Z,1478877671.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:11.180Z,1478877671.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:11.510Z,1478877671.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:11.908Z,1478877671.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:11.976Z,1478877671.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:12.309Z,1478877672.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:12.766Z,1478877672.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:12.772Z,1478877672.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:13.117Z,1478877673.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:13.180Z,1478877673.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:13.517Z,1478877673.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:13.905Z,1478877673.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:13.976Z,1478877673.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:14.326Z,1478877674.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:14.673Z,1478877674.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:14.697Z,1478877674.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:15.104Z,1478877675.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:15.468Z,1478877675.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:15.503Z,1478877675.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:15.909Z,1478877675.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:16.264Z,1478877676.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:16.329Z,1478877676.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:16.672Z,1478877676.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:16.722Z,1478877676.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:17.117Z,1478877677.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:17.469Z,1478877677.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:17.515Z,1478877677.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:17.909Z,1478877677.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:18.267Z,1478877678.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:18.317Z,1478877678.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:18.708Z,1478877678.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:18.709Z,1478877678.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:19.105Z,1478877679.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:19.504Z,1478877679.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:19.510Z,1478877679.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:19.917Z,1478877679.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:20.297Z,1478877680.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:20.300Z,1478877680.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:20.708Z,1478877680.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:20.710Z,1478877680.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:21.117Z,1478877681.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:21.504Z,1478877681.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:21.506Z,1478877681.506 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T15:21:21.506Z,1478877681.506 [BPC1] Data Fault, FailCount= 1
2016-11-11T15:21:21.506Z,1478877681.506 [BPC1](ERROR): Data Fault
2016-11-11T15:21:21.515Z,1478877681.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:21.563Z,1478877681.563 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T15:21:21.899Z,1478877681.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:22.301Z,1478877682.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:22.346Z,1478877682.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:22.369Z,1478877682.369 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T15:16:22.2Z
2016-11-11T15:21:22.369Z,1478877682.369 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T15:21:22.369Z,1478877682.369 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T15:21:22.717Z,1478877682.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:22.770Z,1478877682.770 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:21:22.770Z,1478877682.770 [BPC1] No Fault, FailCount= 1
2016-11-11T15:21:22.796Z,1478877682.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:23.592Z,1478877683.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:23.650Z,1478877683.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:24.388Z,1478877684.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:25.132Z,1478877685.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:25.928Z,1478877685.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:26.724Z,1478877686.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:26.984Z,1478877686.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:27.043Z,1478877687.043 [DataOverHttps](INFO): Sending 44 bytes from file Logs/20161111T044527/Courier0244.lzma
2016-11-11T15:21:27.109Z,1478877687.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:27.152Z,1478877687.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:27.487Z,1478877687.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:27.833Z,1478877687.833 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0244.lzma.bak
2016-11-11T15:21:27.833Z,1478877687.833 [DataOverHttps](INFO): SBD MOMSN=4555522
2016-11-11T15:21:27.908Z,1478877687.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:27.948Z,1478877687.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:28.658Z,1478877688.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:29.179Z,1478877689.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:29.328Z,1478877689.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:29.452Z,1478877689.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:30.248Z,1478877690.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:30.656Z,1478877690.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:31.453Z,1478877691.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:32.248Z,1478877692.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:32.656Z,1478877692.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:32.743Z,1478877692.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:32.897Z,1478877692.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:33.255Z,1478877693.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:33.452Z,1478877693.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:33.661Z,1478877693.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:34.048Z,1478877694.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:34.248Z,1478877694.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:34.456Z,1478877694.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:34.656Z,1478877694.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:35.452Z,1478877695.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:36.249Z,1478877696.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:36.740Z,1478877696.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:37.536Z,1478877697.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:37.893Z,1478877697.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:37.923Z,1478877697.923 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0245.lzma
2016-11-11T15:21:38.033Z,1478877698.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:38.332Z,1478877698.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:38.363Z,1478877698.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:39.128Z,1478877699.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:39.924Z,1478877699.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:40.720Z,1478877700.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:41.516Z,1478877701.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:42.312Z,1478877702.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:43.108Z,1478877703.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:43.904Z,1478877703.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:44.700Z,1478877704.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:45.496Z,1478877705.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:46.292Z,1478877706.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:47.088Z,1478877707.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:47.884Z,1478877707.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:48.680Z,1478877708.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:49.476Z,1478877709.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:50.272Z,1478877710.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:51.068Z,1478877711.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:51.864Z,1478877711.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:52.660Z,1478877712.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:53.456Z,1478877713.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:54.252Z,1478877714.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:55.048Z,1478877715.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:55.844Z,1478877715.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:56.640Z,1478877716.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:57.199Z,1478877717.199 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0245.lzma.bak
2016-11-11T15:21:57.199Z,1478877717.199 [DataOverHttps](INFO): SBD MOMSN=4555524
2016-11-11T15:21:57.262Z,1478877717.262 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:21:57.262Z,1478877717.262 [BPC1] Communications Fault, FailCount= 2
2016-11-11T15:21:57.262Z,1478877717.262 [BPC1](ERROR): Communications Fault
2016-11-11T15:21:57.283Z,1478877717.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:57.361Z,1478877717.361 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:21:57.436Z,1478877717.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:57.844Z,1478877717.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:58.252Z,1478877718.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:58.660Z,1478877718.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:59.060Z,1478877719.059 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T15:21:59.068Z,1478877719.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:59.120Z,1478877719.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:59.129Z,1478877719.129 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T15:21:59.129Z,1478877719.129 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T15:21:59.129Z,1478877719.129 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T15:21:59.254Z,1478877719.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:21:59.476Z,1478877719.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:21:59.884Z,1478877719.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:00.296Z,1478877720.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:00.704Z,1478877720.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:01.112Z,1478877721.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:01.520Z,1478877721.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:01.928Z,1478877721.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:02.336Z,1478877722.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:02.748Z,1478877722.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:02.881Z,1478877722.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:02.929Z,1478877722.929 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:22:02.929Z,1478877722.929 [BPC1] No Fault, FailCount= 2
2016-11-11T15:22:03.073Z,1478877723.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:03.417Z,1478877723.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:03.544Z,1478877723.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:03.786Z,1478877723.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:04.190Z,1478877724.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:04.340Z,1478877724.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:04.544Z,1478877724.544 [NAL9602](INFO): Powering down
2016-11-11T15:22:04.608Z,1478877724.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:04.748Z,1478877724.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:04.995Z,1478877724.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:05.388Z,1478877725.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:05.544Z,1478877725.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:05.800Z,1478877725.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:06.179Z,1478877726.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:06.340Z,1478877726.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:06.644Z,1478877726.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:06.985Z,1478877726.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:07.076Z,1478877727.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:07.384Z,1478877727.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:07.785Z,1478877727.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:07.872Z,1478877727.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:08.184Z,1478877728.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:08.668Z,1478877728.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:08.700Z,1478877728.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:08.978Z,1478877728.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:09.104Z,1478877729.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:09.378Z,1478877729.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:09.801Z,1478877729.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:09.900Z,1478877729.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:10.225Z,1478877730.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:10.592Z,1478877730.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:10.595Z,1478877730.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:11.026Z,1478877731.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:11.388Z,1478877731.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:11.439Z,1478877731.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:11.797Z,1478877731.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:12.184Z,1478877732.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:12.212Z,1478877732.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:12.609Z,1478877732.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:12.680Z,1478877732.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:13.033Z,1478877733.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:13.406Z,1478877733.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:13.476Z,1478877733.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:13.842Z,1478877733.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:14.207Z,1478877734.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:14.272Z,1478877734.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:14.601Z,1478877734.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:14.680Z,1478877734.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:15.002Z,1478877735.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:15.389Z,1478877735.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:15.476Z,1478877735.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:15.832Z,1478877735.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:16.206Z,1478877736.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:16.272Z,1478877736.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:16.602Z,1478877736.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:16.680Z,1478877736.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:17.091Z,1478877737.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:17.386Z,1478877737.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:17.476Z,1478877737.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:17.821Z,1478877737.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:18.272Z,1478877738.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:18.281Z,1478877738.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:18.602Z,1478877738.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:18.708Z,1478877738.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:19.005Z,1478877739.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:19.404Z,1478877739.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:19.504Z,1478877739.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:19.801Z,1478877739.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:20.216Z,1478877740.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:20.301Z,1478877740.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:20.686Z,1478877740.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:20.983Z,1478877740.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:21.076Z,1478877741.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:21.402Z,1478877741.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:21.791Z,1478877741.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:21.872Z,1478877741.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:22.184Z,1478877742.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:22.654Z,1478877742.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:22.668Z,1478877742.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:22.985Z,1478877742.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:23.076Z,1478877743.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:23.411Z,1478877743.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:23.795Z,1478877743.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:23.872Z,1478877743.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:24.243Z,1478877744.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:24.532Z,1478877744.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:24.626Z,1478877744.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:24.986Z,1478877744.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:25.328Z,1478877745.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:25.402Z,1478877745.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:25.810Z,1478877745.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:26.124Z,1478877746.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:26.235Z,1478877746.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:26.606Z,1478877746.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:26.616Z,1478877746.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:26.978Z,1478877746.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:27.412Z,1478877747.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:27.431Z,1478877747.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:27.791Z,1478877747.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:28.202Z,1478877748.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:28.208Z,1478877748.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:28.616Z,1478877748.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:28.646Z,1478877748.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:29.015Z,1478877749.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:29.382Z,1478877749.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:29.412Z,1478877749.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:29.817Z,1478877749.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:30.208Z,1478877750.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:30.246Z,1478877750.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:30.602Z,1478877750.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:30.616Z,1478877750.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:31.013Z,1478877751.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:31.406Z,1478877751.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:31.412Z,1478877751.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:31.821Z,1478877751.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:32.209Z,1478877752.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:32.238Z,1478877752.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:32.594Z,1478877752.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:32.668Z,1478877752.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:32.987Z,1478877752.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:33.389Z,1478877753.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:33.464Z,1478877753.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:33.763Z,1478877753.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:33.787Z,1478877753.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:34.163Z,1478877754.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:34.178Z,1478877754.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:34.260Z,1478877754.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:34.570Z,1478877754.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:34.613Z,1478877754.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:34.963Z,1478877754.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:34.992Z,1478877754.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:35.040Z,1478877755.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:35.363Z,1478877755.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:35.378Z,1478877755.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:35.762Z,1478877755.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:35.789Z,1478877755.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:35.836Z,1478877755.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:36.162Z,1478877756.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:36.197Z,1478877756.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:36.568Z,1478877756.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:36.597Z,1478877756.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:36.632Z,1478877756.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:36.961Z,1478877756.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:37.008Z,1478877757.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:37.040Z,1478877757.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:37.365Z,1478877757.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:37.385Z,1478877757.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:37.761Z,1478877757.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:37.777Z,1478877757.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:37.836Z,1478877757.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:38.162Z,1478877758.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:38.176Z,1478877758.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:38.508Z,1478877758.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:38.565Z,1478877758.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:38.581Z,1478877758.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:38.962Z,1478877758.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:38.977Z,1478877758.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:39.304Z,1478877759.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:39.366Z,1478877759.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:39.385Z,1478877759.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:39.761Z,1478877759.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:39.781Z,1478877759.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:40.101Z,1478877760.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:40.165Z,1478877760.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:40.185Z,1478877760.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:40.512Z,1478877760.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:40.565Z,1478877760.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:40.581Z,1478877760.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:40.965Z,1478877760.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:40.986Z,1478877760.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:41.308Z,1478877761.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:41.365Z,1478877761.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:41.386Z,1478877761.386 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:41.386Z,1478877761.386 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 191
2016-11-11T15:22:41.386Z,1478877761.386 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:22:41.393Z,1478877761.393 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:41.393Z,1478877761.393 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 191
2016-11-11T15:22:41.393Z,1478877761.393 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:22:41.396Z,1478877761.395 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:41.396Z,1478877761.396 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 191
2016-11-11T15:22:41.396Z,1478877761.396 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:22:41.410Z,1478877761.410 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:22:41.410Z,1478877761.410 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:22:41.410Z,1478877761.410 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:22:41.761Z,1478877761.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:41.798Z,1478877761.798 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:22:41.799Z,1478877761.799 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 191
2016-11-11T15:22:41.799Z,1478877761.799 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:22:41.799Z,1478877761.799 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 191
2016-11-11T15:22:41.800Z,1478877761.800 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:22:41.800Z,1478877761.800 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 191
2016-11-11T15:22:42.104Z,1478877762.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:42.162Z,1478877762.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:42.194Z,1478877762.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:22:42.194Z,1478877762.194 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:22:42.194Z,1478877762.194 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:22:42.199Z,1478877762.199 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:22:42.200Z,1478877762.200 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:22:42.200Z,1478877762.200 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:22:42.201Z,1478877762.201 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:22:42.201Z,1478877762.201 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:22:42.201Z,1478877762.201 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:22:42.512Z,1478877762.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:42.565Z,1478877762.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:42.581Z,1478877762.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:42.965Z,1478877762.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:43.021Z,1478877763.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:43.308Z,1478877763.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:43.365Z,1478877763.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:43.380Z,1478877763.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:43.765Z,1478877763.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:43.780Z,1478877763.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:44.104Z,1478877764.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:44.169Z,1478877764.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:44.214Z,1478877764.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:44.512Z,1478877764.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:44.565Z,1478877764.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:44.580Z,1478877764.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:44.961Z,1478877764.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:45.009Z,1478877765.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:45.308Z,1478877765.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:45.361Z,1478877765.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:45.375Z,1478877765.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:45.781Z,1478877765.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:45.822Z,1478877765.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:46.104Z,1478877766.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:46.192Z,1478877766.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:46.243Z,1478877766.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:46.565Z,1478877766.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:46.596Z,1478877766.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:46.624Z,1478877766.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:46.965Z,1478877766.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:46.980Z,1478877766.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:47.365Z,1478877767.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:47.380Z,1478877767.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:47.420Z,1478877767.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:47.761Z,1478877767.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:47.781Z,1478877767.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:48.165Z,1478877768.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:48.180Z,1478877768.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:48.216Z,1478877768.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:48.566Z,1478877768.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:48.598Z,1478877768.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:48.961Z,1478877768.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:48.981Z,1478877768.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:48.992Z,1478877768.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:49.375Z,1478877769.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:49.780Z,1478877769.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:49.788Z,1478877769.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:50.175Z,1478877770.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:50.584Z,1478877770.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:50.601Z,1478877770.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:50.985Z,1478877770.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:50.992Z,1478877770.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:51.379Z,1478877771.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:51.788Z,1478877771.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:51.827Z,1478877771.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:52.176Z,1478877772.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:52.488Z,1478877772.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:52.585Z,1478877772.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:52.976Z,1478877772.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:53.284Z,1478877773.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:53.385Z,1478877773.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:53.779Z,1478877773.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:54.080Z,1478877774.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:54.181Z,1478877774.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:54.488Z,1478877774.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:54.576Z,1478877774.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:54.979Z,1478877774.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:55.284Z,1478877775.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:55.365Z,1478877775.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:55.385Z,1478877775.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:55.765Z,1478877775.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:55.781Z,1478877775.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:56.080Z,1478877776.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:56.161Z,1478877776.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:56.181Z,1478877776.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:56.488Z,1478877776.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:56.561Z,1478877776.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:56.576Z,1478877776.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:56.965Z,1478877776.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:57.005Z,1478877777.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:57.284Z,1478877777.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:57.361Z,1478877777.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:57.389Z,1478877777.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:57.761Z,1478877777.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:57.789Z,1478877777.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:58.080Z,1478877778.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:58.162Z,1478877778.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:58.213Z,1478877778.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:58.500Z,1478877778.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:58.561Z,1478877778.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:58.589Z,1478877778.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:58.960Z,1478877778.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:58.994Z,1478877778.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:59.296Z,1478877779.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:59.361Z,1478877779.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:59.405Z,1478877779.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:22:59.761Z,1478877779.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:22:59.789Z,1478877779.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:00.092Z,1478877780.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:00.628Z,1478877780.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:01.424Z,1478877781.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:02.220Z,1478877782.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:02.964Z,1478877782.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:03.760Z,1478877783.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:04.556Z,1478877784.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:04.964Z,1478877784.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:05.628Z,1478877785.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:05.678Z,1478877785.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:05.760Z,1478877785.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:05.778Z,1478877785.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:05.806Z,1478877785.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:06.153Z,1478877786.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:06.195Z,1478877786.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:06.464Z,1478877786.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:06.557Z,1478877786.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:06.572Z,1478877786.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:06.965Z,1478877786.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:06.980Z,1478877786.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:07.260Z,1478877787.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:07.360Z,1478877787.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:07.375Z,1478877787.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:07.763Z,1478877787.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:07.779Z,1478877787.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:08.057Z,1478877788.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:08.167Z,1478877788.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:08.183Z,1478877788.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:08.468Z,1478877788.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:08.561Z,1478877788.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:08.577Z,1478877788.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:08.980Z,1478877788.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:09.264Z,1478877789.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:09.376Z,1478877789.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:09.781Z,1478877789.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:10.060Z,1478877790.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:10.169Z,1478877790.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:10.184Z,1478877790.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:10.468Z,1478877790.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:10.553Z,1478877790.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:10.585Z,1478877790.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:10.953Z,1478877790.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:10.986Z,1478877790.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:11.264Z,1478877791.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:11.360Z,1478877791.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:11.383Z,1478877791.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:11.753Z,1478877791.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:11.788Z,1478877791.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:12.060Z,1478877792.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:12.168Z,1478877792.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:12.183Z,1478877792.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:12.468Z,1478877792.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:12.569Z,1478877792.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:12.584Z,1478877792.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:12.969Z,1478877792.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:12.984Z,1478877792.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:13.264Z,1478877793.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:13.357Z,1478877793.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:13.383Z,1478877793.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:13.757Z,1478877793.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:13.794Z,1478877793.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:14.060Z,1478877794.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:14.162Z,1478877794.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:14.205Z,1478877794.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:14.553Z,1478877794.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:14.590Z,1478877794.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:14.604Z,1478877794.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:14.953Z,1478877794.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:14.990Z,1478877794.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:15.354Z,1478877795.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:15.390Z,1478877795.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:15.400Z,1478877795.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:15.758Z,1478877795.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:15.793Z,1478877795.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:16.154Z,1478877796.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:16.189Z,1478877796.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:16.196Z,1478877796.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:16.554Z,1478877796.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:16.594Z,1478877796.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:16.920Z,1478877796.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:16.963Z,1478877796.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:16.983Z,1478877796.983 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T15:23:16.983Z,1478877796.983 [BPC1] Data Fault, FailCount= 1
2016-11-11T15:23:16.983Z,1478877796.983 [BPC1](ERROR): Data Fault
2016-11-11T15:23:17.000Z,1478877797.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:17.045Z,1478877797.045 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T15:23:17.361Z,1478877797.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:17.376Z,1478877797.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:17.716Z,1478877797.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:17.766Z,1478877797.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:17.781Z,1478877797.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:18.160Z,1478877798.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:18.175Z,1478877798.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:18.195Z,1478877798.195 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:23:18.195Z,1478877798.195 [BPC1] No Fault, FailCount= 1
2016-11-11T15:23:18.512Z,1478877798.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:18.553Z,1478877798.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:18.649Z,1478877798.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:18.920Z,1478877798.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:18.953Z,1478877798.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:19.021Z,1478877799.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:19.353Z,1478877799.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:19.386Z,1478877799.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:19.716Z,1478877799.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:19.753Z,1478877799.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:19.793Z,1478877799.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:20.153Z,1478877800.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:20.173Z,1478877800.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:20.444Z,1478877800.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:20.553Z,1478877800.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:20.573Z,1478877800.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:20.977Z,1478877800.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:21.240Z,1478877801.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:21.375Z,1478877801.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:21.774Z,1478877801.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:22.036Z,1478877802.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:22.180Z,1478877802.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:22.444Z,1478877802.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:22.575Z,1478877802.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:22.975Z,1478877802.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:23.240Z,1478877803.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:23.381Z,1478877803.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:23.776Z,1478877803.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:24.036Z,1478877804.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:24.183Z,1478877804.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:24.444Z,1478877804.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:24.586Z,1478877804.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:24.983Z,1478877804.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:25.240Z,1478877805.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:25.377Z,1478877805.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:25.778Z,1478877805.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:26.036Z,1478877806.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:26.187Z,1478877806.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:26.444Z,1478877806.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:26.585Z,1478877806.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:26.968Z,1478877806.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:27.240Z,1478877807.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:27.368Z,1478877807.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:27.773Z,1478877807.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:28.038Z,1478877808.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:28.219Z,1478877808.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:28.576Z,1478877808.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:28.596Z,1478877808.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:28.975Z,1478877808.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:29.367Z,1478877809.367 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T15:23:29.367Z,1478877809.367 [BPC1] Data Fault, FailCount= 2
2016-11-11T15:23:29.367Z,1478877809.367 [BPC1](ERROR): Data Fault
2016-11-11T15:23:29.381Z,1478877809.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:29.400Z,1478877809.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:29.433Z,1478877809.433 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T15:23:29.784Z,1478877809.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:30.182Z,1478877810.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:30.196Z,1478877810.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:30.581Z,1478877810.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:30.632Z,1478877810.632 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:23:30.632Z,1478877810.632 [BPC1] No Fault, FailCount= 2
2016-11-11T15:23:30.896Z,1478877810.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:31.038Z,1478877811.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:31.392Z,1478877811.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:31.692Z,1478877811.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:31.764Z,1478877811.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:31.802Z,1478877811.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:32.153Z,1478877812.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:32.178Z,1478877812.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:32.488Z,1478877812.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:32.568Z,1478877812.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:32.584Z,1478877812.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:32.896Z,1478877812.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:32.953Z,1478877812.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:32.978Z,1478877812.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:33.353Z,1478877813.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:33.385Z,1478877813.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:33.692Z,1478877813.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:33.753Z,1478877813.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:33.785Z,1478877813.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:34.153Z,1478877814.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:34.193Z,1478877814.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:34.448Z,1478877814.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:34.561Z,1478877814.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:34.587Z,1478877814.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:34.961Z,1478877814.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:34.986Z,1478877814.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:35.244Z,1478877815.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:35.353Z,1478877815.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:35.389Z,1478877815.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:35.753Z,1478877815.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:35.780Z,1478877815.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:36.040Z,1478877816.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:36.161Z,1478877816.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:36.193Z,1478877816.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:36.448Z,1478877816.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:36.553Z,1478877816.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:36.596Z,1478877816.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:36.957Z,1478877816.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:36.993Z,1478877816.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:37.244Z,1478877817.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:37.353Z,1478877817.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:37.396Z,1478877817.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:37.753Z,1478877817.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:37.768Z,1478877817.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:38.040Z,1478877818.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:38.165Z,1478877818.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:38.196Z,1478877818.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:38.448Z,1478877818.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:38.560Z,1478877818.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:38.575Z,1478877818.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:38.965Z,1478877818.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:38.980Z,1478877818.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:39.244Z,1478877819.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:39.357Z,1478877819.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:39.380Z,1478877819.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:39.760Z,1478877819.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:39.781Z,1478877819.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:40.040Z,1478877820.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:40.167Z,1478877820.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:40.183Z,1478877820.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:40.448Z,1478877820.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:40.564Z,1478877820.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:40.580Z,1478877820.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:40.965Z,1478877820.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:40.985Z,1478877820.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:41.244Z,1478877821.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:41.364Z,1478877821.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:41.379Z,1478877821.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:41.769Z,1478877821.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:41.789Z,1478877821.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:42.040Z,1478877822.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:42.153Z,1478877822.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:42.205Z,1478877822.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:42.520Z,1478877822.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:42.553Z,1478877822.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:42.590Z,1478877822.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:42.953Z,1478877822.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:42.989Z,1478877822.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:43.317Z,1478877823.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:43.357Z,1478877823.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:43.390Z,1478877823.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:43.753Z,1478877823.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:43.813Z,1478877823.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:44.112Z,1478877824.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:44.157Z,1478877824.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:44.189Z,1478877824.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:44.565Z,1478877824.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:44.596Z,1478877824.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:44.883Z,1478877824.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:44.958Z,1478877824.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:44.998Z,1478877824.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:45.358Z,1478877825.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:45.374Z,1478877825.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:45.680Z,1478877825.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:45.757Z,1478877825.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:45.807Z,1478877825.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:46.156Z,1478877826.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:46.207Z,1478877826.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:46.476Z,1478877826.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:46.565Z,1478877826.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:46.580Z,1478877826.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:46.884Z,1478877826.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:46.961Z,1478877826.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:46.981Z,1478877826.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:47.359Z,1478877827.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:47.381Z,1478877827.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:47.680Z,1478877827.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:47.760Z,1478877827.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:47.776Z,1478877827.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:48.160Z,1478877828.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:48.181Z,1478877828.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:48.400Z,1478877828.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:48.564Z,1478877828.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:48.580Z,1478877828.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:48.957Z,1478877828.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:48.979Z,1478877828.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:49.196Z,1478877829.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:49.361Z,1478877829.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:49.381Z,1478877829.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:49.761Z,1478877829.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:49.781Z,1478877829.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:49.993Z,1478877829.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:50.172Z,1478877830.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:50.196Z,1478877830.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:50.436Z,1478877830.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:50.561Z,1478877830.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:50.586Z,1478877830.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:50.953Z,1478877830.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:50.988Z,1478877830.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:51.232Z,1478877831.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:51.353Z,1478877831.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:51.385Z,1478877831.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:51.753Z,1478877831.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:51.789Z,1478877831.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:52.028Z,1478877832.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:52.161Z,1478877832.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:52.188Z,1478877832.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:52.436Z,1478877832.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:52.557Z,1478877832.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:52.583Z,1478877832.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:52.958Z,1478877832.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:52.989Z,1478877832.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:53.232Z,1478877833.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:53.354Z,1478877833.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:53.393Z,1478877833.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:53.762Z,1478877833.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:53.788Z,1478877833.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:54.028Z,1478877834.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:54.162Z,1478877834.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:54.188Z,1478877834.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:54.436Z,1478877834.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:54.584Z,1478877834.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:54.984Z,1478877834.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:55.232Z,1478877835.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:55.384Z,1478877835.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:55.785Z,1478877835.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:56.029Z,1478877836.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:56.185Z,1478877836.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:56.504Z,1478877836.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:56.574Z,1478877836.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:56.976Z,1478877836.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:57.300Z,1478877837.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:57.413Z,1478877837.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:57.778Z,1478877837.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:58.097Z,1478877838.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:58.213Z,1478877838.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:58.581Z,1478877838.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:58.852Z,1478877838.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:58.998Z,1478877838.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:59.383Z,1478877839.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:23:59.648Z,1478877839.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:23:59.820Z,1478877839.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:00.222Z,1478877840.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:00.445Z,1478877840.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:00.852Z,1478877840.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:01.648Z,1478877841.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:02.392Z,1478877842.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:03.188Z,1478877843.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:03.576Z,1478877843.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:03.725Z,1478877843.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:03.984Z,1478877843.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:04.081Z,1478877844.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:04.392Z,1478877844.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:04.453Z,1478877844.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:04.855Z,1478877844.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:05.188Z,1478877845.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:05.283Z,1478877845.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:05.660Z,1478877845.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:05.984Z,1478877845.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:06.062Z,1478877846.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:06.392Z,1478877846.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:06.454Z,1478877846.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:06.853Z,1478877846.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:07.188Z,1478877847.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:07.259Z,1478877847.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:07.653Z,1478877847.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:07.984Z,1478877847.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:08.069Z,1478877848.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:08.392Z,1478877848.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:08.457Z,1478877848.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:08.852Z,1478877848.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:09.190Z,1478877849.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:09.262Z,1478877849.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:09.656Z,1478877849.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:09.984Z,1478877849.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:10.107Z,1478877850.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:10.440Z,1478877850.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:10.536Z,1478877850.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:10.865Z,1478877850.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:11.245Z,1478877851.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:11.332Z,1478877851.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:11.646Z,1478877851.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:12.081Z,1478877852.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:12.128Z,1478877852.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:12.474Z,1478877852.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:12.853Z,1478877852.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:12.924Z,1478877852.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:13.285Z,1478877853.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:13.332Z,1478877853.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:13.653Z,1478877853.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:14.086Z,1478877854.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:14.128Z,1478877854.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:14.499Z,1478877854.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:14.844Z,1478877854.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:14.850Z,1478877854.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:15.257Z,1478877855.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:15.640Z,1478877855.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:15.662Z,1478877855.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:16.057Z,1478877856.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:16.360Z,1478877856.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:16.457Z,1478877856.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:16.853Z,1478877856.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:17.156Z,1478877857.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:17.267Z,1478877857.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:17.669Z,1478877857.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:17.952Z,1478877857.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:18.061Z,1478877858.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:18.364Z,1478877858.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:18.442Z,1478877858.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:18.846Z,1478877858.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:19.160Z,1478877859.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:19.257Z,1478877859.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:19.645Z,1478877859.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:19.956Z,1478877859.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:20.058Z,1478877860.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:20.364Z,1478877860.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:20.447Z,1478877860.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:20.854Z,1478877860.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:21.160Z,1478877861.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:21.253Z,1478877861.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:21.649Z,1478877861.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:21.956Z,1478877861.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:22.053Z,1478877862.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:22.376Z,1478877862.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:22.457Z,1478877862.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:22.853Z,1478877862.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:23.172Z,1478877863.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:23.252Z,1478877863.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:23.658Z,1478877863.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:23.968Z,1478877863.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:24.070Z,1478877864.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:24.457Z,1478877864.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:24.524Z,1478877864.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:24.860Z,1478877864.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:25.260Z,1478877865.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:25.320Z,1478877865.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:25.657Z,1478877865.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:26.058Z,1478877866.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:26.116Z,1478877866.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:26.522Z,1478877866.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:26.823Z,1478877866.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:26.860Z,1478877866.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:27.249Z,1478877867.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:27.621Z,1478877867.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:27.686Z,1478877867.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:28.056Z,1478877868.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:28.417Z,1478877868.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:28.493Z,1478877868.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:28.825Z,1478877868.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:28.883Z,1478877868.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:29.257Z,1478877869.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:29.621Z,1478877869.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:29.665Z,1478877869.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:30.040Z,1478877870.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:30.340Z,1478877870.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:30.445Z,1478877870.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:30.849Z,1478877870.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:31.136Z,1478877871.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:31.243Z,1478877871.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:31.645Z,1478877871.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:31.932Z,1478877871.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:32.057Z,1478877872.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:32.340Z,1478877872.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:32.446Z,1478877872.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:32.857Z,1478877872.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:33.136Z,1478877873.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:33.251Z,1478877873.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:33.647Z,1478877873.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:33.932Z,1478877873.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:34.056Z,1478877874.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:34.340Z,1478877874.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:34.457Z,1478877874.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:34.853Z,1478877874.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:35.136Z,1478877875.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:35.255Z,1478877875.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:35.656Z,1478877875.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:35.932Z,1478877875.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:36.057Z,1478877876.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:36.340Z,1478877876.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:36.450Z,1478877876.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:36.858Z,1478877876.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:37.136Z,1478877877.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:37.250Z,1478877877.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:37.661Z,1478877877.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:37.933Z,1478877877.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:38.074Z,1478877878.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:38.460Z,1478877878.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:38.532Z,1478877878.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:38.861Z,1478877878.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:39.245Z,1478877879.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:39.328Z,1478877879.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:39.643Z,1478877879.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:40.053Z,1478877880.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:40.124Z,1478877880.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:40.457Z,1478877880.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:40.792Z,1478877880.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:40.909Z,1478877880.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:41.254Z,1478877881.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:41.588Z,1478877881.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:41.653Z,1478877881.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:42.089Z,1478877882.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:42.384Z,1478877882.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:42.460Z,1478877882.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:42.792Z,1478877882.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:42.878Z,1478877882.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:43.296Z,1478877883.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:43.588Z,1478877883.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:43.658Z,1478877883.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:44.060Z,1478877884.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:44.316Z,1478877884.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:44.453Z,1478877884.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:44.860Z,1478877884.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:45.112Z,1478877885.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:45.261Z,1478877885.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:45.656Z,1478877885.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:45.909Z,1478877885.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:46.065Z,1478877886.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:46.320Z,1478877886.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:46.440Z,1478877886.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:46.840Z,1478877886.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:47.116Z,1478877887.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:47.248Z,1478877887.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:47.647Z,1478877887.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:47.912Z,1478877887.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:48.052Z,1478877888.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:48.324Z,1478877888.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:48.453Z,1478877888.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:48.853Z,1478877888.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:49.121Z,1478877889.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:49.247Z,1478877889.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:49.651Z,1478877889.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:49.916Z,1478877889.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:50.055Z,1478877890.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:50.325Z,1478877890.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:50.452Z,1478877890.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:50.848Z,1478877890.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:51.120Z,1478877891.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:51.257Z,1478877891.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:51.660Z,1478877891.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:51.916Z,1478877891.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:52.068Z,1478877892.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:52.429Z,1478877892.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:52.460Z,1478877892.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:52.865Z,1478877892.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:53.225Z,1478877893.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:53.242Z,1478877893.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:53.645Z,1478877893.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:54.020Z,1478877894.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:54.050Z,1478877894.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:54.454Z,1478877894.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:54.776Z,1478877894.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:54.857Z,1478877894.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:55.269Z,1478877895.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:55.572Z,1478877895.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:55.669Z,1478877895.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:56.050Z,1478877896.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:56.368Z,1478877896.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:56.496Z,1478877896.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:56.776Z,1478877896.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:56.857Z,1478877896.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:57.274Z,1478877897.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:57.572Z,1478877897.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:57.681Z,1478877897.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:58.062Z,1478877898.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:58.304Z,1478877898.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:58.461Z,1478877898.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:58.860Z,1478877898.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:59.100Z,1478877899.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:24:59.259Z,1478877899.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:59.664Z,1478877899.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:24:59.896Z,1478877899.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:00.061Z,1478877900.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:00.304Z,1478877900.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:00.459Z,1478877900.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:01.100Z,1478877901.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:01.896Z,1478877901.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:02.304Z,1478877902.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:03.100Z,1478877903.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:03.884Z,1478877903.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:03.896Z,1478877903.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:04.005Z,1478877904.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:04.304Z,1478877904.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:04.405Z,1478877904.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:04.791Z,1478877904.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:05.100Z,1478877905.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:05.195Z,1478877905.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:05.601Z,1478877905.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:05.896Z,1478877905.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:06.032Z,1478877906.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:06.401Z,1478877906.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:06.420Z,1478877906.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:06.797Z,1478877906.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:07.201Z,1478877907.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:07.216Z,1478877907.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:07.594Z,1478877907.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:07.993Z,1478877907.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:08.012Z,1478877908.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:08.401Z,1478877908.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:08.740Z,1478877908.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:08.795Z,1478877908.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:09.206Z,1478877909.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:09.536Z,1478877909.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:09.621Z,1478877909.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:10.017Z,1478877910.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:10.332Z,1478877910.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:10.405Z,1478877910.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:10.740Z,1478877910.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:10.829Z,1478877910.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:11.229Z,1478877911.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:11.536Z,1478877911.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:11.590Z,1478877911.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:12.018Z,1478877912.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:12.264Z,1478877912.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:12.421Z,1478877912.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:12.797Z,1478877912.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:13.062Z,1478877913.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:13.197Z,1478877913.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:13.597Z,1478877913.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:13.857Z,1478877913.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:13.999Z,1478877913.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:14.264Z,1478877914.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:14.397Z,1478877914.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:14.818Z,1478877914.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:15.060Z,1478877915.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:15.201Z,1478877915.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:15.602Z,1478877915.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:15.856Z,1478877915.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:16.005Z,1478877916.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:16.264Z,1478877916.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:16.417Z,1478877916.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:16.804Z,1478877916.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:17.060Z,1478877917.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:17.196Z,1478877917.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:17.610Z,1478877917.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:17.856Z,1478877917.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:18.012Z,1478877918.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:18.264Z,1478877918.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:18.389Z,1478877918.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:18.789Z,1478877918.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:19.060Z,1478877919.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:19.189Z,1478877919.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:19.594Z,1478877919.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:19.857Z,1478877919.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:20.018Z,1478877920.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:20.400Z,1478877920.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:20.403Z,1478877920.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:20.802Z,1478877920.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:21.196Z,1478877921.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:21.201Z,1478877921.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:21.601Z,1478877921.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:21.992Z,1478877921.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:22.005Z,1478877922.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:22.397Z,1478877922.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:22.716Z,1478877922.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:22.801Z,1478877922.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:23.210Z,1478877923.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:23.512Z,1478877923.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:23.597Z,1478877923.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:24.012Z,1478877924.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:24.308Z,1478877924.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:24.409Z,1478877924.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:24.716Z,1478877924.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:24.833Z,1478877924.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:25.197Z,1478877925.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:25.513Z,1478877925.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:25.594Z,1478877925.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:26.030Z,1478877926.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:26.244Z,1478877926.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:26.397Z,1478877926.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:26.834Z,1478877926.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:27.040Z,1478877927.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:27.233Z,1478877927.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:27.611Z,1478877927.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:27.836Z,1478877927.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:28.006Z,1478877928.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:28.252Z,1478877928.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:28.399Z,1478877928.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:28.800Z,1478877928.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:29.048Z,1478877929.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:29.201Z,1478877929.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:29.603Z,1478877929.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:29.844Z,1478877929.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:30.002Z,1478877930.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:30.252Z,1478877930.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:30.400Z,1478877930.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:30.799Z,1478877930.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:31.048Z,1478877931.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:31.200Z,1478877931.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:31.605Z,1478877931.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:31.844Z,1478877931.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:32.002Z,1478877932.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:32.252Z,1478877932.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:32.412Z,1478877932.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:32.809Z,1478877932.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:33.048Z,1478877933.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:33.217Z,1478877933.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:33.606Z,1478877933.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:33.844Z,1478877933.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:34.000Z,1478877934.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:34.340Z,1478877934.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:34.410Z,1478877934.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:34.803Z,1478877934.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:35.136Z,1478877935.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:35.206Z,1478877935.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:35.600Z,1478877935.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:35.932Z,1478877935.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:36.005Z,1478877936.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:36.400Z,1478877936.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:36.696Z,1478877936.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:36.800Z,1478877936.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:37.200Z,1478877937.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:37.492Z,1478877937.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:37.605Z,1478877937.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:38.003Z,1478877938.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:38.288Z,1478877938.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:38.407Z,1478877938.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:38.696Z,1478877938.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:38.804Z,1478877938.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:39.204Z,1478877939.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:39.492Z,1478877939.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:39.653Z,1478877939.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:39.990Z,1478877939.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:40.224Z,1478877940.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:40.437Z,1478877940.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:40.791Z,1478877940.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:41.020Z,1478877941.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:41.233Z,1478877941.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:41.618Z,1478877941.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:41.816Z,1478877941.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:42.017Z,1478877942.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:42.224Z,1478877942.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:42.392Z,1478877942.392 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:42.392Z,1478877942.392 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 192
2016-11-11T15:25:42.392Z,1478877942.392 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:25:42.399Z,1478877942.399 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:42.400Z,1478877942.399 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 192
2016-11-11T15:25:42.400Z,1478877942.400 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:25:42.402Z,1478877942.402 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:42.402Z,1478877942.402 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 192
2016-11-11T15:25:42.402Z,1478877942.402 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:25:42.437Z,1478877942.437 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:25:42.437Z,1478877942.437 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:25:42.437Z,1478877942.437 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:25:42.807Z,1478877942.807 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:25:42.831Z,1478877942.831 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 192
2016-11-11T15:25:42.832Z,1478877942.832 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:25:42.832Z,1478877942.832 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 192
2016-11-11T15:25:42.832Z,1478877942.832 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:25:42.832Z,1478877942.832 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 192
2016-11-11T15:25:43.020Z,1478877943.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:43.190Z,1478877943.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:25:43.190Z,1478877943.190 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:25:43.190Z,1478877943.190 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:25:43.195Z,1478877943.195 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:25:43.196Z,1478877943.196 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:25:43.196Z,1478877943.196 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:25:43.196Z,1478877943.196 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:25:43.197Z,1478877943.197 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:25:43.197Z,1478877943.197 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:25:43.592Z,1478877943.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:43.816Z,1478877943.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:44.000Z,1478877944.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:44.232Z,1478877944.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:44.413Z,1478877944.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:44.787Z,1478877944.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:45.028Z,1478877945.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:45.190Z,1478877945.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:45.597Z,1478877945.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:45.824Z,1478877945.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:46.017Z,1478877946.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:46.232Z,1478877946.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:46.393Z,1478877946.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:46.797Z,1478877946.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:47.028Z,1478877947.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:47.192Z,1478877947.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:47.591Z,1478877947.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:47.824Z,1478877947.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:47.999Z,1478877947.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:48.312Z,1478877948.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:48.413Z,1478877948.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:48.797Z,1478877948.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:49.108Z,1478877949.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:49.202Z,1478877949.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:49.601Z,1478877949.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:49.904Z,1478877949.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:50.004Z,1478877950.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:50.405Z,1478877950.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:50.672Z,1478877950.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:50.806Z,1478877950.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:51.200Z,1478877951.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:51.468Z,1478877951.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:51.607Z,1478877951.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:51.994Z,1478877951.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:52.265Z,1478877952.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:52.399Z,1478877952.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:52.672Z,1478877952.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:52.801Z,1478877952.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:53.194Z,1478877953.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:53.468Z,1478877953.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:53.617Z,1478877953.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:54.029Z,1478877954.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:54.200Z,1478877954.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:54.407Z,1478877954.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:54.810Z,1478877954.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:54.996Z,1478877954.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:55.221Z,1478877955.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:55.609Z,1478877955.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:55.794Z,1478877955.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:56.022Z,1478877956.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:56.204Z,1478877956.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:56.421Z,1478877956.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:56.791Z,1478877956.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:57.001Z,1478877957.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:57.193Z,1478877957.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:57.592Z,1478877957.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:57.796Z,1478877957.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:58.001Z,1478877958.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:58.204Z,1478877958.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:58.392Z,1478877958.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:58.797Z,1478877958.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:58.000Z,1478877959.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:59.192Z,1478877959.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:59.592Z,1478877959.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:25:59.796Z,1478877959.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:25:59.000Z,1478877960.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:00.204Z,1478877960.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:00.393Z,1478877960.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:00.801Z,1478877960.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:00.000Z,1478877961.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:01.796Z,1478877961.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:02.304Z,1478877962.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:03.100Z,1478877963.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:03.896Z,1478877963.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:04.442Z,1478877964.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:04.462Z,1478877964.462 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T15:26:04.557Z,1478877964.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:04.664Z,1478877964.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:04.927Z,1478877964.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:05.323Z,1478877965.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:05.460Z,1478877965.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:05.722Z,1478877965.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:06.118Z,1478877966.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:06.257Z,1478877966.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:06.525Z,1478877966.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:06.669Z,1478877966.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:06.910Z,1478877966.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:07.321Z,1478877967.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:07.464Z,1478877967.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:07.805Z,1478877967.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:08.141Z,1478877968.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:08.208Z,1478877968.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:08.510Z,1478877968.510 [PNI_TCM](ERROR): CRC does not match. Expected:0x55915 got:0x7490
2016-11-11T15:26:08.565Z,1478877968.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:08.921Z,1478877968.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:09.004Z,1478877969.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:09.317Z,1478877969.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:09.780Z,1478877969.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:09.800Z,1478877969.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:10.120Z,1478877970.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:10.208Z,1478877970.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:10.526Z,1478877970.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:10.917Z,1478877970.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:11.004Z,1478877971.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:11.333Z,1478877971.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:11.738Z,1478877971.738 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:26:11.738Z,1478877971.738 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:26:11.738Z,1478877971.738 [BPC1](ERROR): Communications Fault
2016-11-11T15:26:11.778Z,1478877971.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:11.800Z,1478877971.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:11.847Z,1478877971.847 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:26:12.134Z,1478877972.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:12.208Z,1478877972.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:12.517Z,1478877972.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:12.923Z,1478877972.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:12.964Z,1478877972.964 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:26:12.964Z,1478877972.964 [BPC1] No Fault, FailCount= 1
2016-11-11T15:26:13.004Z,1478877973.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:13.373Z,1478877973.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:13.777Z,1478877973.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:13.800Z,1478877973.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:14.119Z,1478877974.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:14.208Z,1478877974.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:14.523Z,1478877974.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:14.909Z,1478877974.909 [PNI_TCM](ERROR): CRC does not match. Expected:0x20029 got:0x59264
2016-11-11T15:26:14.926Z,1478877974.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:15.004Z,1478877975.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:15.320Z,1478877975.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:15.722Z,1478877975.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:15.801Z,1478877975.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:16.133Z,1478877976.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:16.272Z,1478877976.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:16.519Z,1478877976.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:16.925Z,1478877976.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:17.068Z,1478877977.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:17.327Z,1478877977.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:17.722Z,1478877977.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:17.864Z,1478877977.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:18.121Z,1478877978.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:18.528Z,1478877978.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:18.656Z,1478877978.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:18.928Z,1478877978.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:19.327Z,1478877979.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:19.452Z,1478877979.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:19.729Z,1478877979.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:20.128Z,1478877980.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:20.248Z,1478877980.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:20.521Z,1478877980.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:20.656Z,1478877980.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:20.925Z,1478877980.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:21.319Z,1478877981.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:21.452Z,1478877981.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:21.785Z,1478877981.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:22.117Z,1478877982.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:22.176Z,1478877982.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:22.519Z,1478877982.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:22.925Z,1478877982.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:22.972Z,1478877982.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:23.329Z,1478877983.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:23.768Z,1478877983.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:23.792Z,1478877983.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:24.121Z,1478877984.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:24.208Z,1478877984.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:24.573Z,1478877984.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:24.919Z,1478877984.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:25.004Z,1478877985.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:25.321Z,1478877985.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:25.778Z,1478877985.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:25.800Z,1478877985.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:26.157Z,1478877986.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:26.208Z,1478877986.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:26.525Z,1478877986.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:26.951Z,1478877986.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:27.004Z,1478877987.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:27.357Z,1478877987.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:27.760Z,1478877987.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:27.800Z,1478877987.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:28.113Z,1478877988.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:28.208Z,1478877988.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:28.508Z,1478877988.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:28.915Z,1478877988.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:29.004Z,1478877989.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:29.314Z,1478877989.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:29.714Z,1478877989.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:29.801Z,1478877989.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:30.127Z,1478877990.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:30.256Z,1478877990.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:30.528Z,1478877990.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:30.924Z,1478877990.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:31.052Z,1478877991.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:31.335Z,1478877991.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:31.736Z,1478877991.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:31.848Z,1478877991.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:32.108Z,1478877992.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:32.521Z,1478877992.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:32.628Z,1478877992.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:32.925Z,1478877992.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:33.323Z,1478877993.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:33.424Z,1478877993.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:33.729Z,1478877993.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:34.119Z,1478877994.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:34.228Z,1478877994.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:34.533Z,1478877994.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:34.636Z,1478877994.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:34.938Z,1478877994.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:35.313Z,1478877995.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:35.432Z,1478877995.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:35.761Z,1478877995.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:36.121Z,1478877996.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:36.172Z,1478877996.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:36.519Z,1478877996.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:36.915Z,1478877996.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:36.968Z,1478877996.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:37.321Z,1478877997.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:37.764Z,1478877997.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:37.783Z,1478877997.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:38.141Z,1478877998.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:38.172Z,1478877998.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:38.503Z,1478877998.503 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T15:26:38.504Z,1478877998.504 [BPC1] Data Fault, FailCount= 1
2016-11-11T15:26:38.504Z,1478877998.504 [BPC1](ERROR): Data Fault
2016-11-11T15:26:38.525Z,1478877998.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:38.566Z,1478877998.566 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T15:26:38.929Z,1478877998.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:38.968Z,1478877998.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:39.320Z,1478877999.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:39.751Z,1478877999.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:39.764Z,1478877999.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:39.803Z,1478877999.803 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:26:39.803Z,1478877999.803 [BPC1] No Fault, FailCount= 1
2016-11-11T15:26:40.185Z,1478878000.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:40.188Z,1478878000.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:40.545Z,1478878000.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:40.936Z,1478878000.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:40.984Z,1478878000.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:41.308Z,1478878001.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:41.756Z,1478878001.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:41.780Z,1478878001.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:42.121Z,1478878002.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:42.200Z,1478878002.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:42.512Z,1478878002.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:42.915Z,1478878002.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:42.996Z,1478878002.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:43.321Z,1478878003.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:43.715Z,1478878003.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:43.793Z,1478878003.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:44.116Z,1478878004.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:44.248Z,1478878004.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:44.521Z,1478878004.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:44.926Z,1478878004.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:45.044Z,1478878005.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:45.316Z,1478878005.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:45.721Z,1478878005.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:45.841Z,1478878005.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:46.168Z,1478878006.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:46.524Z,1478878006.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:46.620Z,1478878006.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:46.926Z,1478878006.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:47.327Z,1478878007.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:47.416Z,1478878007.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:47.726Z,1478878007.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:48.149Z,1478878008.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:48.212Z,1478878008.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:48.525Z,1478878008.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:48.624Z,1478878008.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:48.916Z,1478878008.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:49.332Z,1478878009.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:49.420Z,1478878009.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:49.746Z,1478878009.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:50.133Z,1478878010.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:50.184Z,1478878010.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:50.529Z,1478878010.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:50.925Z,1478878010.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:50.980Z,1478878010.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:51.349Z,1478878011.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:51.752Z,1478878011.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:51.776Z,1478878011.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:52.113Z,1478878012.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:52.184Z,1478878012.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:52.545Z,1478878012.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:52.917Z,1478878012.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:52.980Z,1478878012.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:53.321Z,1478878013.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:53.776Z,1478878013.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:53.802Z,1478878013.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:54.129Z,1478878014.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:54.184Z,1478878014.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:54.564Z,1478878014.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:54.957Z,1478878014.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:54.980Z,1478878014.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:55.325Z,1478878015.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:55.743Z,1478878015.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:55.776Z,1478878015.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:56.125Z,1478878016.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:56.184Z,1478878016.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:56.528Z,1478878016.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:56.928Z,1478878016.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:56.981Z,1478878016.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:57.324Z,1478878017.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:57.734Z,1478878017.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:57.777Z,1478878017.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:58.113Z,1478878018.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:58.248Z,1478878018.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:58.512Z,1478878018.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:58.915Z,1478878018.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:59.044Z,1478878019.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:26:59.321Z,1478878019.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:59.329Z,1478878019.329 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T15:26:59.330Z,1478878019.330 [Default:CheckIn:C.Wait] Stopped
2016-11-11T15:26:59.330Z,1478878019.330 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T15:26:59.330Z,1478878019.330 [Default:CheckIn:D] Running Loop=1
2016-11-11T15:26:59.715Z,1478878019.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:26:59.724Z,1478878019.724 [Default:CheckIn:D] Stopped
2016-11-11T15:26:59.724Z,1478878019.724 [Default:CheckIn:E] Running Loop=1
2016-11-11T15:26:59.842Z,1478878019.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:00.208Z,1478878020.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:00.218Z,1478878020.218 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 636.973568 min 
2016-11-11T15:27:00.218Z,1478878020.218 [Default:CheckIn:E] Stopped
2016-11-11T15:27:00.218Z,1478878020.218 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T15:27:00.219Z,1478878020.218 [Default:CheckIn] Stopped
2016-11-11T15:27:00.219Z,1478878020.219 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T15:27:00.219Z,1478878020.219 [Default:CheckIn](INFO): Running loop #62
2016-11-11T15:27:00.219Z,1478878020.219 [Default:CheckIn] Running Loop=62
2016-11-11T15:27:00.219Z,1478878020.219 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T15:27:00.219Z,1478878020.219 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T15:27:00.521Z,1478878020.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:00.580Z,1478878020.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:00.877Z,1478878020.876 [NAL9602](INFO): Powering up
2016-11-11T15:27:00.928Z,1478878020.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:01.376Z,1478878021.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:02.172Z,1478878022.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:02.584Z,1478878022.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:03.380Z,1478878023.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:04.112Z,1478878024.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:04.378Z,1478878024.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:04.496Z,1478878024.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:04.877Z,1478878024.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:04.908Z,1478878024.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:05.293Z,1478878025.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:05.706Z,1478878025.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:05.766Z,1478878025.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:06.083Z,1478878026.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:06.152Z,1478878026.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:06.480Z,1478878026.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:06.909Z,1478878026.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:06.948Z,1478878026.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:07.278Z,1478878027.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:07.709Z,1478878027.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:07.744Z,1478878027.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:08.113Z,1478878028.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:08.164Z,1478878028.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:08.471Z,1478878028.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:08.907Z,1478878028.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:08.960Z,1478878028.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:09.305Z,1478878029.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:09.718Z,1478878029.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:09.756Z,1478878029.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:10.072Z,1478878030.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:10.164Z,1478878030.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:10.475Z,1478878030.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:10.877Z,1478878030.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:10.960Z,1478878030.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:11.277Z,1478878031.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:11.682Z,1478878031.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:11.757Z,1478878031.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:12.041Z,1478878032.041 [NAL9602](INFO): NAL9602 initialized
2016-11-11T15:27:12.086Z,1478878032.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:12.204Z,1478878032.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:12.483Z,1478878032.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:12.837Z,1478878032.837 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T15:27:12.837Z,1478878032.837 [NAL9602] Data Fault, FailCount= 4
2016-11-11T15:27:12.837Z,1478878032.837 [NAL9602](ERROR): Data Fault
2016-11-11T15:27:12.897Z,1478878032.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:12.942Z,1478878032.942 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T15:27:13.000Z,1478878033.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:13.233Z,1478878033.233 [NAL9602](INFO): Powering down
2016-11-11T15:27:13.302Z,1478878033.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:13.698Z,1478878033.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:13.816Z,1478878033.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:14.128Z,1478878034.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:14.214Z,1478878034.214 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T15:27:14.214Z,1478878034.214 [NAL9602] No Fault, FailCount= 4
2016-11-11T15:27:14.500Z,1478878034.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:14.596Z,1478878034.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:14.892Z,1478878034.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:15.278Z,1478878035.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:15.392Z,1478878035.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:15.679Z,1478878035.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:16.147Z,1478878036.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:16.188Z,1478878036.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:16.486Z,1478878036.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:16.596Z,1478878036.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:16.898Z,1478878036.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:17.289Z,1478878037.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:17.392Z,1478878037.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:17.718Z,1478878037.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:18.129Z,1478878038.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:18.184Z,1478878038.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:18.433Z,1478878038.432 [NAL9602](INFO): Powering up NAL9602
2016-11-11T15:27:18.509Z,1478878038.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:18.893Z,1478878038.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:18.980Z,1478878038.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:19.295Z,1478878039.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:19.702Z,1478878039.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:19.776Z,1478878039.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:20.084Z,1478878040.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:20.184Z,1478878040.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:20.533Z,1478878040.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:20.905Z,1478878040.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:20.980Z,1478878040.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:21.333Z,1478878041.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:21.721Z,1478878041.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:21.776Z,1478878041.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:22.113Z,1478878042.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:22.412Z,1478878042.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:22.509Z,1478878042.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:22.918Z,1478878042.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:23.208Z,1478878043.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:23.335Z,1478878043.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:23.717Z,1478878043.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:24.004Z,1478878044.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:24.088Z,1478878044.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:24.412Z,1478878044.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:24.502Z,1478878044.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:24.880Z,1478878044.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:25.208Z,1478878045.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:25.302Z,1478878045.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:25.669Z,1478878045.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:26.004Z,1478878046.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:26.102Z,1478878046.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:26.412Z,1478878046.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:26.486Z,1478878046.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:26.918Z,1478878046.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:27.208Z,1478878047.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:27.303Z,1478878047.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:27.697Z,1478878047.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:28.004Z,1478878048.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:28.219Z,1478878048.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:28.510Z,1478878048.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:28.588Z,1478878048.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:28.865Z,1478878048.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:29.312Z,1478878049.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:29.384Z,1478878049.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:29.633Z,1478878049.633 [NAL9602](INFO): NAL9602 initialized
2016-11-11T15:27:29.684Z,1478878049.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:30.125Z,1478878050.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:30.180Z,1478878050.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:30.489Z,1478878050.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:30.620Z,1478878050.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:30.896Z,1478878050.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:31.293Z,1478878051.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:31.416Z,1478878051.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:31.705Z,1478878051.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:32.084Z,1478878052.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:32.124Z,1478878052.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:32.494Z,1478878052.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:32.905Z,1478878052.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:32.936Z,1478878052.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:33.282Z,1478878053.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:33.732Z,1478878053.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:33.753Z,1478878053.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:34.092Z,1478878054.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:34.140Z,1478878054.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:34.484Z,1478878054.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:34.890Z,1478878054.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:34.936Z,1478878054.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:35.302Z,1478878055.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:35.708Z,1478878055.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:35.732Z,1478878055.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:36.094Z,1478878056.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:36.140Z,1478878056.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:36.505Z,1478878056.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:36.886Z,1478878056.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:36.936Z,1478878056.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:37.334Z,1478878057.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:37.732Z,1478878057.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:37.753Z,1478878057.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:38.095Z,1478878058.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:38.506Z,1478878058.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:38.528Z,1478878058.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:38.904Z,1478878058.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:39.269Z,1478878059.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:39.324Z,1478878059.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:39.670Z,1478878059.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:40.068Z,1478878060.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:40.120Z,1478878060.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:40.473Z,1478878060.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:40.873Z,1478878060.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:40.916Z,1478878060.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:41.288Z,1478878061.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:41.673Z,1478878061.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:41.712Z,1478878061.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:42.081Z,1478878062.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:42.485Z,1478878062.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:42.508Z,1478878062.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:42.907Z,1478878062.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:43.289Z,1478878063.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:43.304Z,1478878063.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:43.678Z,1478878063.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:44.077Z,1478878064.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:44.100Z,1478878064.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:27:44.473Z,1478878064.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:44.869Z,1478878064.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:45.269Z,1478878065.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:45.669Z,1478878065.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:46.065Z,1478878066.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:46.489Z,1478878066.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:46.873Z,1478878066.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:47.268Z,1478878067.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:47.679Z,1478878067.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:48.084Z,1478878068.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:48.505Z,1478878068.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:48.884Z,1478878068.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:49.289Z,1478878069.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:49.668Z,1478878069.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:50.065Z,1478878070.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:50.501Z,1478878070.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:50.864Z,1478878070.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:51.301Z,1478878071.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:51.722Z,1478878071.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:52.069Z,1478878072.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:52.469Z,1478878072.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:52.889Z,1478878072.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:53.282Z,1478878073.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:53.690Z,1478878073.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:54.092Z,1478878074.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:54.465Z,1478878074.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:54.869Z,1478878074.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:55.265Z,1478878075.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:55.668Z,1478878075.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:56.109Z,1478878076.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:56.464Z,1478878076.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:56.870Z,1478878076.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:57.269Z,1478878077.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:57.681Z,1478878077.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:58.085Z,1478878078.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:58.483Z,1478878078.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:58.879Z,1478878078.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:59.293Z,1478878079.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:27:59.664Z,1478878079.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:00.073Z,1478878080.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:00.466Z,1478878080.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:00.870Z,1478878080.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:01.312Z,1478878081.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:09.295Z,1478878089.295 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:28:09.296Z,1478878089.296 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:28:09.296Z,1478878089.296 [BPC1](ERROR): Communications Fault
2016-11-11T15:28:09.313Z,1478878089.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:09.355Z,1478878089.355 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:28:09.437Z,1478878089.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:09.853Z,1478878089.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:10.226Z,1478878090.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:10.282Z,1478878090.282 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:28:10.282Z,1478878090.282 [BPC1] No Fault, FailCount= 1
2016-11-11T15:28:10.680Z,1478878090.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:11.065Z,1478878091.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:11.428Z,1478878091.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:11.823Z,1478878091.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:12.233Z,1478878092.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:12.630Z,1478878092.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:13.029Z,1478878093.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:13.424Z,1478878093.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:13.832Z,1478878093.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:14.249Z,1478878094.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:14.647Z,1478878094.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:15.027Z,1478878095.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:15.429Z,1478878095.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:15.829Z,1478878095.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:16.221Z,1478878096.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:16.622Z,1478878096.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:17.022Z,1478878097.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:17.433Z,1478878097.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:17.834Z,1478878097.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:18.232Z,1478878098.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:18.634Z,1478878098.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:19.031Z,1478878099.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:19.446Z,1478878099.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:19.839Z,1478878099.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:20.251Z,1478878100.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:20.626Z,1478878100.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:21.019Z,1478878101.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:21.428Z,1478878101.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:21.868Z,1478878101.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:22.229Z,1478878102.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:22.622Z,1478878102.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:23.056Z,1478878103.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:23.433Z,1478878103.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:23.832Z,1478878103.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:24.279Z,1478878104.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:24.641Z,1478878104.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:25.074Z,1478878105.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:25.477Z,1478878105.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:25.846Z,1478878105.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:26.234Z,1478878106.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:26.646Z,1478878106.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:27.043Z,1478878107.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:27.425Z,1478878107.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:27.819Z,1478878107.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:28.228Z,1478878108.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:28.630Z,1478878108.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:29.029Z,1478878109.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:29.432Z,1478878109.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:29.835Z,1478878109.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:30.245Z,1478878110.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:30.645Z,1478878110.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:31.062Z,1478878111.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:31.434Z,1478878111.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:31.849Z,1478878111.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:32.215Z,1478878112.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:32.625Z,1478878112.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:33.020Z,1478878113.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:33.421Z,1478878113.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:33.830Z,1478878113.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:34.233Z,1478878114.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:34.632Z,1478878114.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:35.037Z,1478878115.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:35.440Z,1478878115.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:35.838Z,1478878115.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:36.243Z,1478878116.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:36.633Z,1478878116.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:36.848Z,1478878116.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:28:37.017Z,1478878117.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:37.454Z,1478878117.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:37.644Z,1478878117.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:28:37.825Z,1478878117.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:38.254Z,1478878118.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:38.625Z,1478878118.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:39.067Z,1478878119.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:39.426Z,1478878119.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:39.869Z,1478878119.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:40.243Z,1478878120.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:40.635Z,1478878120.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:41.042Z,1478878121.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:41.443Z,1478878121.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:41.837Z,1478878121.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:42.217Z,1478878122.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:42.617Z,1478878122.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:43.025Z,1478878123.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:43.421Z,1478878123.421 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:43.421Z,1478878123.421 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 193
2016-11-11T15:28:43.421Z,1478878123.421 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:28:43.428Z,1478878123.428 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:43.428Z,1478878123.428 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 193
2016-11-11T15:28:43.428Z,1478878123.428 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:28:43.430Z,1478878123.430 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:43.430Z,1478878123.430 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 193
2016-11-11T15:28:43.430Z,1478878123.430 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:28:43.535Z,1478878123.535 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:28:43.535Z,1478878123.535 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:28:43.535Z,1478878123.535 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:28:43.872Z,1478878123.872 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:28:43.873Z,1478878123.872 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 193
2016-11-11T15:28:43.873Z,1478878123.873 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:28:43.873Z,1478878123.873 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 193
2016-11-11T15:28:43.874Z,1478878123.874 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:28:43.874Z,1478878123.874 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 193
2016-11-11T15:28:44.222Z,1478878124.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:28:44.222Z,1478878124.222 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:28:44.223Z,1478878124.223 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:28:44.230Z,1478878124.230 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:28:44.230Z,1478878124.230 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:28:44.230Z,1478878124.230 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:28:44.231Z,1478878124.231 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:28:44.232Z,1478878124.232 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:28:44.232Z,1478878124.232 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:28:44.631Z,1478878124.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:45.025Z,1478878125.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:45.447Z,1478878125.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:45.844Z,1478878125.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:46.256Z,1478878126.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:46.623Z,1478878126.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:47.019Z,1478878127.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:47.427Z,1478878127.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:47.829Z,1478878127.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:48.229Z,1478878128.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:48.639Z,1478878128.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:49.030Z,1478878129.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:49.413Z,1478878129.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:49.842Z,1478878129.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:50.224Z,1478878130.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:50.629Z,1478878130.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:50.832Z,1478878130.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:28:51.058Z,1478878131.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:51.469Z,1478878131.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:51.628Z,1478878131.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:28:51.873Z,1478878131.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:52.219Z,1478878132.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:52.617Z,1478878132.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:53.053Z,1478878133.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:53.425Z,1478878133.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:53.865Z,1478878133.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:54.229Z,1478878134.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:54.667Z,1478878134.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:55.035Z,1478878135.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:55.433Z,1478878135.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:55.852Z,1478878135.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:56.232Z,1478878136.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:56.630Z,1478878136.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:57.037Z,1478878137.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:57.438Z,1478878137.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:57.844Z,1478878137.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:58.225Z,1478878138.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:58.634Z,1478878138.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:59.036Z,1478878139.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:59.421Z,1478878139.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:28:59.823Z,1478878139.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:00.218Z,1478878140.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:00.634Z,1478878140.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:01.030Z,1478878141.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:01.472Z,1478878141.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:04.840Z,1478878144.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:04.976Z,1478878144.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:05.104Z,1478878145.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:05.457Z,1478878145.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:05.636Z,1478878145.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:05.857Z,1478878145.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:06.297Z,1478878146.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:06.689Z,1478878146.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:07.058Z,1478878147.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:07.495Z,1478878147.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:07.861Z,1478878147.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:08.274Z,1478878148.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:08.681Z,1478878148.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:09.067Z,1478878149.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:09.516Z,1478878149.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:09.850Z,1478878149.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:10.258Z,1478878150.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:10.652Z,1478878150.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:11.056Z,1478878151.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:11.519Z,1478878151.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:11.862Z,1478878151.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:12.269Z,1478878152.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:12.661Z,1478878152.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:13.064Z,1478878153.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:13.497Z,1478878153.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:13.858Z,1478878153.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:14.257Z,1478878154.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:14.654Z,1478878154.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:15.063Z,1478878155.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:15.506Z,1478878155.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:15.868Z,1478878155.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:16.267Z,1478878156.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:16.681Z,1478878156.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:17.079Z,1478878157.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:17.481Z,1478878157.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:17.888Z,1478878157.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:18.255Z,1478878158.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:18.656Z,1478878158.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:19.064Z,1478878159.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:19.462Z,1478878159.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:19.857Z,1478878159.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:20.264Z,1478878160.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:20.717Z,1478878160.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:21.063Z,1478878161.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:21.461Z,1478878161.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:21.912Z,1478878161.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:22.277Z,1478878162.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:22.714Z,1478878162.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:23.089Z,1478878163.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:23.531Z,1478878163.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:23.845Z,1478878163.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:24.252Z,1478878164.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:24.651Z,1478878164.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:25.057Z,1478878165.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:25.499Z,1478878165.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:25.861Z,1478878165.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:26.262Z,1478878166.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:26.660Z,1478878166.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:27.069Z,1478878167.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:27.506Z,1478878167.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:27.877Z,1478878167.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:28.265Z,1478878168.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:28.665Z,1478878168.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:29.065Z,1478878169.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:29.492Z,1478878169.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:29.853Z,1478878169.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:30.257Z,1478878170.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:30.657Z,1478878170.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:31.057Z,1478878171.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:31.453Z,1478878171.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:31.861Z,1478878171.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:32.270Z,1478878172.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:32.666Z,1478878172.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:33.077Z,1478878173.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:33.478Z,1478878173.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:33.906Z,1478878173.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:34.244Z,1478878174.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:34.649Z,1478878174.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:35.081Z,1478878175.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:35.501Z,1478878175.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:35.908Z,1478878175.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:36.279Z,1478878176.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:36.665Z,1478878176.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:37.095Z,1478878177.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:37.513Z,1478878177.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:37.873Z,1478878177.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:38.272Z,1478878178.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:38.678Z,1478878178.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:39.049Z,1478878179.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:39.509Z,1478878179.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:39.854Z,1478878179.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:40.253Z,1478878180.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:40.652Z,1478878180.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:40.696Z,1478878180.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:41.062Z,1478878181.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:41.487Z,1478878181.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:41.492Z,1478878181.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:41.863Z,1478878181.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:41.900Z,1478878181.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:42.254Z,1478878182.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:42.665Z,1478878182.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:42.696Z,1478878182.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:43.067Z,1478878183.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:43.477Z,1478878183.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:43.492Z,1478878183.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:43.866Z,1478878183.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:43.900Z,1478878183.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:44.265Z,1478878184.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:44.664Z,1478878184.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:44.704Z,1478878184.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:45.060Z,1478878185.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:45.500Z,1478878185.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:45.504Z,1478878185.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:45.849Z,1478878185.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:45.980Z,1478878185.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:46.253Z,1478878186.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:46.651Z,1478878186.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:46.776Z,1478878186.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:47.057Z,1478878187.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:47.461Z,1478878187.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:47.572Z,1478878187.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:47.941Z,1478878187.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:48.262Z,1478878188.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:48.316Z,1478878188.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:48.669Z,1478878188.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:49.073Z,1478878189.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:49.112Z,1478878189.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:49.517Z,1478878189.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:49.908Z,1478878189.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:49.911Z,1478878189.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:50.274Z,1478878190.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:50.328Z,1478878190.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:50.665Z,1478878190.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:51.081Z,1478878191.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:51.124Z,1478878191.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:51.489Z,1478878191.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:51.865Z,1478878191.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:51.868Z,1478878191.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:52.253Z,1478878192.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:52.653Z,1478878192.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:52.664Z,1478878192.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:53.059Z,1478878193.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:53.460Z,1478878193.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:53.470Z,1478878193.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:53.868Z,1478878193.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:53.870Z,1478878193.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:54.262Z,1478878194.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:54.661Z,1478878194.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:54.664Z,1478878194.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:55.061Z,1478878195.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:55.460Z,1478878195.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:55.473Z,1478878195.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:55.854Z,1478878195.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:55.868Z,1478878195.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:56.264Z,1478878196.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:56.658Z,1478878196.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:56.664Z,1478878196.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:57.061Z,1478878197.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:57.460Z,1478878197.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:57.470Z,1478878197.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:57.857Z,1478878197.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:57.868Z,1478878197.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:58.277Z,1478878198.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:58.664Z,1478878198.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:58.675Z,1478878198.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:59.077Z,1478878199.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:59.461Z,1478878199.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:29:59.514Z,1478878199.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:59.857Z,1478878199.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:29:59.952Z,1478878199.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:00.261Z,1478878200.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:00.654Z,1478878200.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:00.748Z,1478878200.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:01.055Z,1478878201.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:01.454Z,1478878201.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:01.544Z,1478878201.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:02.296Z,1478878202.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:03.092Z,1478878203.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:03.888Z,1478878203.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:04.296Z,1478878204.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:05.092Z,1478878205.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:05.145Z,1478878205.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:05.273Z,1478878205.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:05.661Z,1478878205.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:05.808Z,1478878205.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:06.061Z,1478878206.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:06.466Z,1478878206.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:06.604Z,1478878206.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:06.814Z,1478878206.814 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:30:06.814Z,1478878206.814 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:30:06.814Z,1478878206.814 [BPC1](ERROR): Communications Fault
2016-11-11T15:30:06.864Z,1478878206.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:06.897Z,1478878206.897 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:30:07.248Z,1478878207.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:07.400Z,1478878207.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:07.652Z,1478878207.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:07.808Z,1478878207.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:08.073Z,1478878208.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:08.148Z,1478878208.148 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:30:08.148Z,1478878208.148 [BPC1] No Fault, FailCount= 1
2016-11-11T15:30:08.490Z,1478878208.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:08.604Z,1478878208.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:08.861Z,1478878208.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:09.232Z,1478878209.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:09.400Z,1478878209.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:09.641Z,1478878209.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:09.808Z,1478878209.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:10.046Z,1478878210.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:10.445Z,1478878210.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:10.604Z,1478878210.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:10.847Z,1478878210.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:11.242Z,1478878211.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:11.400Z,1478878211.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:11.639Z,1478878211.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:11.808Z,1478878211.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:12.041Z,1478878212.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:12.444Z,1478878212.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:12.604Z,1478878212.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:12.844Z,1478878212.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:13.245Z,1478878213.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:13.400Z,1478878213.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:13.644Z,1478878213.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:13.896Z,1478878213.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:14.048Z,1478878214.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:14.445Z,1478878214.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:14.692Z,1478878214.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:14.822Z,1478878214.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:15.252Z,1478878215.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:15.488Z,1478878215.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:15.653Z,1478878215.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:16.054Z,1478878216.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:16.256Z,1478878216.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:16.461Z,1478878216.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:16.835Z,1478878216.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:17.052Z,1478878217.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:17.230Z,1478878217.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:17.637Z,1478878217.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:17.848Z,1478878217.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:18.037Z,1478878218.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:18.260Z,1478878218.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:18.438Z,1478878218.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:18.839Z,1478878218.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:19.056Z,1478878219.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:19.295Z,1478878219.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:19.657Z,1478878219.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:19.828Z,1478878219.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:20.033Z,1478878220.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:20.435Z,1478878220.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:20.624Z,1478878220.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:20.906Z,1478878220.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:21.273Z,1478878221.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:21.420Z,1478878221.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:21.659Z,1478878221.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:21.828Z,1478878221.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:22.082Z,1478878222.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:22.449Z,1478878222.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:22.624Z,1478878222.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:22.901Z,1478878222.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:23.253Z,1478878223.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:23.420Z,1478878223.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:23.652Z,1478878223.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:23.828Z,1478878223.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:24.053Z,1478878224.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:24.477Z,1478878224.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:24.624Z,1478878224.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:24.831Z,1478878224.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:25.233Z,1478878225.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:25.420Z,1478878225.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:25.652Z,1478878225.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:25.832Z,1478878225.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:26.053Z,1478878226.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:26.454Z,1478878226.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:26.629Z,1478878226.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:26.849Z,1478878226.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:27.229Z,1478878227.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:27.425Z,1478878227.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:27.655Z,1478878227.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:27.872Z,1478878227.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:28.027Z,1478878228.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:28.430Z,1478878228.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:28.668Z,1478878228.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:28.839Z,1478878228.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:29.229Z,1478878229.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:29.464Z,1478878229.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:29.637Z,1478878229.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:30.049Z,1478878230.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:30.228Z,1478878230.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:30.441Z,1478878230.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:30.853Z,1478878230.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:31.024Z,1478878231.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:31.249Z,1478878231.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:31.651Z,1478878231.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:31.821Z,1478878231.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:32.048Z,1478878232.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:32.232Z,1478878232.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:32.424Z,1478878232.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:32.824Z,1478878232.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:33.028Z,1478878233.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:33.231Z,1478878233.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:33.641Z,1478878233.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:33.768Z,1478878233.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:34.041Z,1478878234.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:34.435Z,1478878234.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:34.849Z,1478878234.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:35.340Z,1478878235.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:35.675Z,1478878235.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:36.067Z,1478878236.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:36.437Z,1478878236.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:36.865Z,1478878236.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:37.269Z,1478878237.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:37.641Z,1478878237.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:38.044Z,1478878238.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:38.442Z,1478878238.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:38.842Z,1478878238.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:39.255Z,1478878239.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:39.687Z,1478878239.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:40.030Z,1478878240.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:40.441Z,1478878240.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:40.584Z,1478878240.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:40.848Z,1478878240.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:41.282Z,1478878241.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:41.395Z,1478878241.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:41.646Z,1478878241.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:41.860Z,1478878241.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:42.046Z,1478878242.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:42.450Z,1478878242.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:42.656Z,1478878242.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:42.830Z,1478878242.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:43.233Z,1478878243.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:43.452Z,1478878243.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:43.636Z,1478878243.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:44.036Z,1478878244.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:44.216Z,1478878244.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:44.431Z,1478878244.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:44.834Z,1478878244.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:45.012Z,1478878245.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:30:45.236Z,1478878245.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:45.643Z,1478878245.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:46.032Z,1478878246.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:46.457Z,1478878246.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:46.850Z,1478878246.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:47.247Z,1478878247.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:47.648Z,1478878247.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:48.023Z,1478878248.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:48.430Z,1478878248.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:48.843Z,1478878248.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:49.313Z,1478878249.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:49.622Z,1478878249.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:50.026Z,1478878250.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:50.450Z,1478878250.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:50.830Z,1478878250.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:51.291Z,1478878251.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:51.689Z,1478878251.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:52.049Z,1478878252.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:52.477Z,1478878252.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:52.875Z,1478878252.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:53.240Z,1478878253.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:53.645Z,1478878253.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:54.045Z,1478878254.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:54.447Z,1478878254.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:54.822Z,1478878254.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:55.230Z,1478878255.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:55.650Z,1478878255.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:56.042Z,1478878256.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:56.485Z,1478878256.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:56.837Z,1478878256.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:57.265Z,1478878257.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:57.665Z,1478878257.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:58.069Z,1478878258.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:58.445Z,1478878258.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:58.845Z,1478878258.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:59.242Z,1478878259.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:30:59.626Z,1478878259.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:00.045Z,1478878260.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:00.454Z,1478878260.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:00.844Z,1478878260.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:01.237Z,1478878261.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:01.642Z,1478878261.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:05.093Z,1478878265.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:05.228Z,1478878265.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:05.645Z,1478878265.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:06.004Z,1478878266.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:06.431Z,1478878266.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:06.834Z,1478878266.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:07.203Z,1478878267.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:07.593Z,1478878267.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:08.006Z,1478878268.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:08.409Z,1478878268.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:08.787Z,1478878268.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:09.186Z,1478878269.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:09.590Z,1478878269.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:10.021Z,1478878270.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:10.398Z,1478878270.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:10.806Z,1478878270.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:11.189Z,1478878271.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:11.594Z,1478878271.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:12.008Z,1478878272.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:12.413Z,1478878272.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:12.813Z,1478878272.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:13.197Z,1478878273.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:13.585Z,1478878273.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:13.986Z,1478878273.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:14.392Z,1478878274.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:14.792Z,1478878274.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:15.212Z,1478878275.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:15.609Z,1478878275.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:15.982Z,1478878275.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:16.387Z,1478878276.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:16.787Z,1478878276.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:17.196Z,1478878277.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:17.613Z,1478878277.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:18.009Z,1478878278.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:18.386Z,1478878278.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:18.821Z,1478878278.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:19.193Z,1478878279.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:19.596Z,1478878279.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:20.004Z,1478878280.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:20.404Z,1478878280.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:20.809Z,1478878280.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:21.265Z,1478878281.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:21.598Z,1478878281.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:21.990Z,1478878281.990 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:31:21.990Z,1478878281.990 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:31:21.990Z,1478878281.990 [BPC1](ERROR): Communications Fault
2016-11-11T15:31:22.023Z,1478878282.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:22.064Z,1478878282.063 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:31:22.389Z,1478878282.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:22.787Z,1478878282.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:23.202Z,1478878283.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:23.243Z,1478878283.243 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:31:23.247Z,1478878283.247 [BPC1] No Fault, FailCount= 1
2016-11-11T15:31:23.670Z,1478878283.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:24.022Z,1478878284.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:24.387Z,1478878284.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:24.796Z,1478878284.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:25.211Z,1478878285.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:25.609Z,1478878285.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:26.036Z,1478878286.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:26.421Z,1478878286.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:26.806Z,1478878286.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:27.208Z,1478878287.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:27.581Z,1478878287.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:27.986Z,1478878287.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:28.388Z,1478878288.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:28.790Z,1478878288.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:29.276Z,1478878289.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:29.595Z,1478878289.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:30.004Z,1478878290.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:30.395Z,1478878290.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:30.813Z,1478878290.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:31.193Z,1478878291.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:31.608Z,1478878291.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:31.982Z,1478878291.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:32.417Z,1478878292.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:32.788Z,1478878292.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:33.189Z,1478878293.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:33.608Z,1478878293.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:34.004Z,1478878294.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:34.412Z,1478878294.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:34.829Z,1478878294.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:35.252Z,1478878295.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:35.603Z,1478878295.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:36.012Z,1478878296.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:36.397Z,1478878296.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:36.841Z,1478878296.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:37.205Z,1478878297.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:37.609Z,1478878297.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:38.007Z,1478878298.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:38.415Z,1478878298.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:38.803Z,1478878298.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:39.203Z,1478878299.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:39.601Z,1478878299.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:39.982Z,1478878299.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:40.410Z,1478878300.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:40.788Z,1478878300.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:41.191Z,1478878301.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:41.597Z,1478878301.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:42.007Z,1478878302.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:42.416Z,1478878302.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:42.799Z,1478878302.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:43.229Z,1478878303.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:43.612Z,1478878303.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:43.978Z,1478878303.978 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T15:31:44.017Z,1478878304.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:44.394Z,1478878304.394 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:44.394Z,1478878304.394 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 194
2016-11-11T15:31:44.394Z,1478878304.394 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:31:44.411Z,1478878304.411 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:44.415Z,1478878304.415 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 194
2016-11-11T15:31:44.415Z,1478878304.415 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:31:44.417Z,1478878304.417 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:44.417Z,1478878304.417 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 194
2016-11-11T15:31:44.417Z,1478878304.417 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:31:44.452Z,1478878304.453 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:31:44.453Z,1478878304.453 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:31:44.453Z,1478878304.453 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:31:44.831Z,1478878304.831 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:31:44.831Z,1478878304.831 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 194
2016-11-11T15:31:44.832Z,1478878304.832 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:31:44.832Z,1478878304.832 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 194
2016-11-11T15:31:44.833Z,1478878304.833 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:31:44.833Z,1478878304.833 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 194
2016-11-11T15:31:45.264Z,1478878305.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:31:45.265Z,1478878305.265 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:31:45.265Z,1478878305.265 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:31:45.278Z,1478878305.278 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:31:45.278Z,1478878305.278 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:31:45.278Z,1478878305.279 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:31:45.280Z,1478878305.280 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:31:45.280Z,1478878305.280 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:31:45.281Z,1478878305.281 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:31:45.616Z,1478878305.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:45.994Z,1478878305.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:46.413Z,1478878306.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:46.817Z,1478878306.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:47.255Z,1478878307.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:47.586Z,1478878307.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:47.993Z,1478878307.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:48.429Z,1478878308.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:48.797Z,1478878308.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:49.299Z,1478878309.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:49.594Z,1478878309.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:49.995Z,1478878309.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:50.419Z,1478878310.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:50.802Z,1478878310.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:51.222Z,1478878311.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:51.626Z,1478878311.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:52.004Z,1478878312.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:52.397Z,1478878312.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:52.803Z,1478878312.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:53.198Z,1478878313.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:53.594Z,1478878313.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:54.003Z,1478878314.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:54.380Z,1478878314.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:54.785Z,1478878314.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:55.218Z,1478878315.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:55.618Z,1478878315.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:55.988Z,1478878315.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:56.398Z,1478878316.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:56.791Z,1478878316.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:57.245Z,1478878317.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:57.597Z,1478878317.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:57.995Z,1478878317.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:58.390Z,1478878318.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:58.797Z,1478878318.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:59.259Z,1478878319.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:31:59.605Z,1478878319.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:00.012Z,1478878320.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:00.404Z,1478878320.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:00.413Z,1478878320.413 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T15:27:00.2Z
2016-11-11T15:32:00.413Z,1478878320.413 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T15:32:00.413Z,1478878320.413 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T15:32:00.815Z,1478878320.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:01.724Z,1478878321.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:01.881Z,1478878321.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:05.557Z,1478878325.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:05.586Z,1478878325.586 [DataOverHttps](INFO): Sending 44 bytes from file Logs/20161111T044527/Courier0248.lzma
2016-11-11T15:32:05.691Z,1478878325.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:06.045Z,1478878326.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:06.385Z,1478878326.385 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0248.lzma.bak
2016-11-11T15:32:06.385Z,1478878326.385 [DataOverHttps](INFO): SBD MOMSN=4555529
2016-11-11T15:32:06.480Z,1478878326.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:07.790Z,1478878327.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:07.965Z,1478878327.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:12.509Z,1478878332.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:12.694Z,1478878332.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:13.062Z,1478878333.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:13.454Z,1478878333.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:13.867Z,1478878333.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:14.272Z,1478878334.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:23.919Z,1478878343.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:24.012Z,1478878344.011 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0249.lzma
2016-11-11T15:32:24.112Z,1478878344.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:24.518Z,1478878344.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:24.810Z,1478878344.810 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0249.lzma.bak
2016-11-11T15:32:24.810Z,1478878344.810 [DataOverHttps](INFO): SBD MOMSN=4555531
2016-11-11T15:32:24.925Z,1478878344.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:26.632Z,1478878346.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:26.641Z,1478878346.641 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T15:32:26.641Z,1478878346.641 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T15:32:26.642Z,1478878346.642 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T15:32:26.757Z,1478878346.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:34.171Z,1478878354.171 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T15:32:34.285Z,1478878354.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:34.443Z,1478878354.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:34.837Z,1478878354.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:35.243Z,1478878355.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:35.656Z,1478878355.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:36.030Z,1478878356.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:36.441Z,1478878356.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:36.826Z,1478878356.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:37.229Z,1478878357.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:37.641Z,1478878357.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:38.026Z,1478878358.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:38.441Z,1478878358.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:38.843Z,1478878358.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:39.226Z,1478878359.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:39.576Z,1478878359.576 [NAL9602](INFO): Powering down
2016-11-11T15:32:39.622Z,1478878359.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:40.025Z,1478878360.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:40.424Z,1478878360.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:40.825Z,1478878360.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:41.234Z,1478878361.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:41.613Z,1478878361.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:42.013Z,1478878362.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:42.413Z,1478878362.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:42.817Z,1478878362.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:43.213Z,1478878363.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:43.617Z,1478878363.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:44.008Z,1478878364.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:44.412Z,1478878364.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:44.813Z,1478878364.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:45.209Z,1478878365.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:45.681Z,1478878365.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:46.012Z,1478878366.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:46.433Z,1478878366.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:46.811Z,1478878366.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:47.264Z,1478878367.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:47.645Z,1478878367.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:48.011Z,1478878368.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:48.434Z,1478878368.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:48.845Z,1478878368.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:49.217Z,1478878369.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:49.621Z,1478878369.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:50.038Z,1478878370.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:50.411Z,1478878370.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:50.812Z,1478878370.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:51.213Z,1478878371.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:51.613Z,1478878371.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:52.013Z,1478878372.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:52.417Z,1478878372.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:52.817Z,1478878372.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:53.213Z,1478878373.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:53.617Z,1478878373.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:54.011Z,1478878374.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:54.409Z,1478878374.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:54.813Z,1478878374.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:55.273Z,1478878375.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:55.617Z,1478878375.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:56.017Z,1478878376.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:56.413Z,1478878376.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:56.817Z,1478878376.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:57.213Z,1478878377.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:57.617Z,1478878377.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:58.012Z,1478878378.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:58.417Z,1478878378.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:58.817Z,1478878378.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:59.212Z,1478878379.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:32:59.637Z,1478878379.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:00.012Z,1478878380.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:00.412Z,1478878380.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:00.833Z,1478878380.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:01.218Z,1478878381.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:01.608Z,1478878381.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:02.045Z,1478878382.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:02.417Z,1478878382.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:02.834Z,1478878382.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:03.306Z,1478878383.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:03.611Z,1478878383.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:04.012Z,1478878384.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:04.425Z,1478878384.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:04.813Z,1478878384.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:05.263Z,1478878385.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:05.630Z,1478878385.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:06.021Z,1478878386.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:06.421Z,1478878386.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:06.821Z,1478878386.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:07.215Z,1478878387.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:07.621Z,1478878387.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:08.017Z,1478878388.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:08.417Z,1478878388.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:08.821Z,1478878388.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:09.216Z,1478878389.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:09.621Z,1478878389.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:10.022Z,1478878390.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:10.421Z,1478878390.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:10.822Z,1478878390.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:11.222Z,1478878391.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:11.615Z,1478878391.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:12.015Z,1478878392.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:12.425Z,1478878392.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:12.819Z,1478878392.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:13.221Z,1478878393.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:13.629Z,1478878393.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:14.055Z,1478878394.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:14.423Z,1478878394.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:14.821Z,1478878394.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:15.273Z,1478878395.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:15.632Z,1478878395.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:16.045Z,1478878396.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:16.433Z,1478878396.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:16.839Z,1478878396.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:17.246Z,1478878397.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:17.626Z,1478878397.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:18.034Z,1478878398.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:18.438Z,1478878398.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:18.837Z,1478878398.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:19.212Z,1478878399.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:19.644Z,1478878399.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:20.013Z,1478878400.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:20.421Z,1478878400.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:20.815Z,1478878400.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:21.215Z,1478878401.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:21.619Z,1478878401.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:22.014Z,1478878402.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:22.415Z,1478878402.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:22.825Z,1478878402.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:23.215Z,1478878403.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:23.615Z,1478878403.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:24.024Z,1478878404.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:24.415Z,1478878404.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:24.826Z,1478878404.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:25.223Z,1478878405.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:25.617Z,1478878405.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:26.019Z,1478878406.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:26.424Z,1478878406.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:26.829Z,1478878406.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:27.224Z,1478878407.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:30.637Z,1478878410.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:30.749Z,1478878410.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:31.153Z,1478878411.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:31.605Z,1478878411.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:31.943Z,1478878411.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:32.382Z,1478878412.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:32.779Z,1478878412.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:33.153Z,1478878413.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:33.582Z,1478878413.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:33.954Z,1478878413.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:34.356Z,1478878414.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:34.751Z,1478878414.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:35.150Z,1478878415.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:35.557Z,1478878415.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:35.937Z,1478878415.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:36.341Z,1478878416.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:36.737Z,1478878416.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:37.149Z,1478878417.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:37.549Z,1478878417.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:37.949Z,1478878417.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:38.384Z,1478878418.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:38.746Z,1478878418.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:39.165Z,1478878419.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:39.557Z,1478878419.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:39.957Z,1478878419.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:40.357Z,1478878420.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:40.756Z,1478878420.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:41.159Z,1478878421.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:41.553Z,1478878421.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:41.949Z,1478878421.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:42.363Z,1478878422.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:42.758Z,1478878422.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:43.228Z,1478878423.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:43.582Z,1478878423.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:43.953Z,1478878423.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:44.349Z,1478878424.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:44.785Z,1478878424.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:45.146Z,1478878425.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:45.555Z,1478878425.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:45.969Z,1478878425.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:46.356Z,1478878426.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:46.773Z,1478878426.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:47.166Z,1478878427.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:47.573Z,1478878427.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:47.937Z,1478878427.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:48.341Z,1478878428.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:48.740Z,1478878428.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:49.138Z,1478878429.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:49.543Z,1478878429.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:49.943Z,1478878429.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:50.342Z,1478878430.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:50.753Z,1478878430.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:51.150Z,1478878431.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:51.549Z,1478878431.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:51.945Z,1478878431.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:52.348Z,1478878432.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:52.781Z,1478878432.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:53.153Z,1478878433.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:53.567Z,1478878433.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:53.963Z,1478878433.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:54.345Z,1478878434.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:54.743Z,1478878434.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:55.148Z,1478878435.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:55.549Z,1478878435.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:55.943Z,1478878435.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:56.342Z,1478878436.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:56.753Z,1478878436.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:57.189Z,1478878437.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:57.553Z,1478878437.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:57.946Z,1478878437.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:58.346Z,1478878438.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:58.757Z,1478878438.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:59.167Z,1478878439.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:59.556Z,1478878439.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:33:59.977Z,1478878439.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:00.357Z,1478878440.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:00.777Z,1478878440.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:01.167Z,1478878441.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:01.546Z,1478878441.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:01.936Z,1478878441.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:02.337Z,1478878442.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:02.745Z,1478878442.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:03.141Z,1478878443.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:03.556Z,1478878443.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:03.947Z,1478878443.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:04.344Z,1478878444.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:04.749Z,1478878444.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:05.154Z,1478878445.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:05.543Z,1478878445.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:05.949Z,1478878445.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:06.348Z,1478878446.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:06.744Z,1478878446.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:07.144Z,1478878447.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:07.551Z,1478878447.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:07.944Z,1478878447.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:08.353Z,1478878448.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:08.757Z,1478878448.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:09.155Z,1478878449.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:09.545Z,1478878449.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:09.969Z,1478878449.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:10.357Z,1478878450.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:10.741Z,1478878450.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:11.175Z,1478878451.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:11.540Z,1478878451.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:11.944Z,1478878451.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:12.345Z,1478878452.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:12.793Z,1478878452.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:13.166Z,1478878453.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:13.563Z,1478878453.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:13.977Z,1478878453.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:14.346Z,1478878454.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:14.769Z,1478878454.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:15.173Z,1478878455.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:15.552Z,1478878455.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:15.961Z,1478878455.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:16.336Z,1478878456.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:16.741Z,1478878456.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:17.145Z,1478878457.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:17.549Z,1478878457.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:17.949Z,1478878457.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:18.342Z,1478878458.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:18.743Z,1478878458.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:19.150Z,1478878459.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:19.549Z,1478878459.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:19.946Z,1478878459.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:20.352Z,1478878460.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:20.754Z,1478878460.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:21.151Z,1478878461.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:21.552Z,1478878461.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:21.953Z,1478878461.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:22.344Z,1478878462.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:22.752Z,1478878462.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:23.154Z,1478878463.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:23.545Z,1478878463.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:23.995Z,1478878463.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:24.353Z,1478878464.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:24.744Z,1478878464.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:25.158Z,1478878465.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:25.560Z,1478878465.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:25.960Z,1478878465.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:26.367Z,1478878466.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:26.764Z,1478878466.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:27.173Z,1478878467.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:27.577Z,1478878467.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:31.069Z,1478878471.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:31.189Z,1478878471.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:31.543Z,1478878471.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:31.974Z,1478878471.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:32.339Z,1478878472.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:32.777Z,1478878472.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:33.182Z,1478878473.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:33.542Z,1478878473.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:33.956Z,1478878473.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:34.348Z,1478878474.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:34.742Z,1478878474.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:35.150Z,1478878475.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:35.554Z,1478878475.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:35.940Z,1478878475.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:36.379Z,1478878476.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:36.753Z,1478878476.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:37.147Z,1478878477.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:37.549Z,1478878477.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:37.949Z,1478878477.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:38.342Z,1478878478.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:38.748Z,1478878478.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:39.147Z,1478878479.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:39.540Z,1478878479.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:39.948Z,1478878479.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:40.342Z,1478878480.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:40.748Z,1478878480.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:41.142Z,1478878481.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:41.561Z,1478878481.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:41.945Z,1478878481.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:42.349Z,1478878482.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:42.762Z,1478878482.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:43.137Z,1478878483.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:43.563Z,1478878483.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:43.936Z,1478878483.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:44.335Z,1478878484.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:44.739Z,1478878484.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:45.189Z,1478878485.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:45.577Z,1478878485.578 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:45.578Z,1478878485.578 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 195
2016-11-11T15:34:45.578Z,1478878485.578 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:34:45.593Z,1478878485.593 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:45.593Z,1478878485.593 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 195
2016-11-11T15:34:45.593Z,1478878485.593 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:34:45.599Z,1478878485.599 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:45.599Z,1478878485.599 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 195
2016-11-11T15:34:45.600Z,1478878485.599 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:34:45.622Z,1478878485.622 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:34:45.622Z,1478878485.622 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:34:45.623Z,1478878485.622 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:34:45.964Z,1478878485.964 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:34:45.964Z,1478878485.964 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 195
2016-11-11T15:34:45.965Z,1478878485.965 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:34:45.965Z,1478878485.965 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 195
2016-11-11T15:34:45.966Z,1478878485.966 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:34:45.966Z,1478878485.966 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 195
2016-11-11T15:34:46.346Z,1478878486.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:34:46.347Z,1478878486.347 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:34:46.347Z,1478878486.347 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:34:46.352Z,1478878486.352 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:34:46.352Z,1478878486.352 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:34:46.353Z,1478878486.353 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:34:46.353Z,1478878486.353 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:34:46.354Z,1478878486.354 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:34:46.354Z,1478878486.354 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:34:46.765Z,1478878486.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:47.153Z,1478878487.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:47.581Z,1478878487.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:47.944Z,1478878487.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:48.366Z,1478878488.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:48.756Z,1478878488.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:49.156Z,1478878489.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:49.558Z,1478878489.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:49.953Z,1478878489.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:50.336Z,1478878490.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:50.745Z,1478878490.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:51.141Z,1478878491.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:51.545Z,1478878491.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:51.954Z,1478878491.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:52.346Z,1478878492.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:52.740Z,1478878492.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:53.141Z,1478878493.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:53.539Z,1478878493.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:53.939Z,1478878493.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:54.338Z,1478878494.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:54.746Z,1478878494.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:55.140Z,1478878495.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:55.545Z,1478878495.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:55.949Z,1478878495.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:56.349Z,1478878496.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:56.749Z,1478878496.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:57.159Z,1478878497.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:57.545Z,1478878497.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:57.942Z,1478878497.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:58.352Z,1478878498.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:58.753Z,1478878498.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:59.153Z,1478878499.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:59.533Z,1478878499.533 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T15:34:59.534Z,1478878499.534 [BPC1] Data Fault, FailCount= 1
2016-11-11T15:34:59.534Z,1478878499.534 [BPC1](ERROR): Data Fault
2016-11-11T15:34:59.561Z,1478878499.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:34:59.597Z,1478878499.597 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T15:34:59.956Z,1478878499.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:00.335Z,1478878500.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:00.735Z,1478878500.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:00.779Z,1478878500.779 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:35:00.779Z,1478878500.779 [BPC1] No Fault, FailCount= 1
2016-11-11T15:35:01.208Z,1478878501.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:01.573Z,1478878501.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:01.935Z,1478878501.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:02.339Z,1478878502.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:02.742Z,1478878502.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:03.153Z,1478878503.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:03.541Z,1478878503.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:03.945Z,1478878503.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:04.345Z,1478878504.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:04.742Z,1478878504.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:05.148Z,1478878505.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:05.545Z,1478878505.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:05.941Z,1478878505.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:06.349Z,1478878506.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:06.750Z,1478878506.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:07.147Z,1478878507.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:07.549Z,1478878507.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:07.946Z,1478878507.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:08.352Z,1478878508.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:08.752Z,1478878508.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:09.153Z,1478878509.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:09.553Z,1478878509.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:09.951Z,1478878509.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:10.354Z,1478878510.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:10.740Z,1478878510.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:11.133Z,1478878511.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:11.559Z,1478878511.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:11.957Z,1478878511.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:12.335Z,1478878512.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:12.735Z,1478878512.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:13.165Z,1478878513.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:13.603Z,1478878513.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:13.939Z,1478878513.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:14.348Z,1478878514.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:14.783Z,1478878514.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:15.152Z,1478878515.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:15.565Z,1478878515.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:15.958Z,1478878515.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:16.352Z,1478878516.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:16.753Z,1478878516.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:17.156Z,1478878517.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:17.532Z,1478878517.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:17.936Z,1478878517.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:18.336Z,1478878518.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:18.741Z,1478878518.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:19.140Z,1478878519.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:19.547Z,1478878519.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:19.935Z,1478878519.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:20.345Z,1478878520.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:20.753Z,1478878520.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:21.149Z,1478878521.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:21.550Z,1478878521.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:21.948Z,1478878521.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:22.350Z,1478878522.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:22.744Z,1478878522.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:23.144Z,1478878523.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:23.557Z,1478878523.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:23.945Z,1478878523.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:24.351Z,1478878524.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:24.746Z,1478878524.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:25.148Z,1478878525.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:25.551Z,1478878525.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:25.954Z,1478878525.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:26.352Z,1478878526.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:26.751Z,1478878526.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:27.145Z,1478878527.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:27.541Z,1478878527.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:28.007Z,1478878528.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:31.645Z,1478878531.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:31.793Z,1478878531.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:32.150Z,1478878532.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:32.516Z,1478878532.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:32.958Z,1478878532.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:33.350Z,1478878533.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:33.716Z,1478878533.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:34.117Z,1478878534.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:34.527Z,1478878534.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:34.976Z,1478878534.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:35.312Z,1478878535.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:35.729Z,1478878535.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:36.136Z,1478878536.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:36.514Z,1478878536.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:36.914Z,1478878536.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:37.363Z,1478878537.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:37.716Z,1478878537.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:38.121Z,1478878538.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:38.523Z,1478878538.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:38.918Z,1478878538.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:39.359Z,1478878539.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:39.722Z,1478878539.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:40.128Z,1478878540.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:40.527Z,1478878540.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:40.930Z,1478878540.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:41.328Z,1478878541.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:41.727Z,1478878541.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:42.126Z,1478878542.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:42.528Z,1478878542.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:42.918Z,1478878542.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:43.329Z,1478878543.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:43.712Z,1478878543.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:44.112Z,1478878544.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:44.519Z,1478878544.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:44.927Z,1478878544.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:45.328Z,1478878545.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:45.753Z,1478878545.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:46.120Z,1478878546.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:46.537Z,1478878546.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:46.926Z,1478878546.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:47.314Z,1478878547.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:47.717Z,1478878547.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:48.114Z,1478878548.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:48.507Z,1478878548.507 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:35:48.507Z,1478878548.507 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:35:48.507Z,1478878548.507 [BPC1](ERROR): Communications Fault
2016-11-11T15:35:48.516Z,1478878548.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:48.568Z,1478878548.568 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:35:48.980Z,1478878548.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:49.321Z,1478878549.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:49.724Z,1478878549.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:49.744Z,1478878549.744 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:35:49.744Z,1478878549.744 [BPC1] No Fault, FailCount= 1
2016-11-11T15:35:50.169Z,1478878550.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:50.539Z,1478878550.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:50.929Z,1478878550.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:51.340Z,1478878551.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:51.713Z,1478878551.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:52.112Z,1478878552.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:52.519Z,1478878552.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:52.914Z,1478878552.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:53.337Z,1478878553.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:53.725Z,1478878553.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:54.126Z,1478878554.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:54.517Z,1478878554.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:54.920Z,1478878554.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:55.325Z,1478878555.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:55.718Z,1478878555.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:56.127Z,1478878556.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:56.524Z,1478878556.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:56.924Z,1478878556.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:57.327Z,1478878557.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:57.729Z,1478878557.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:58.128Z,1478878558.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:58.524Z,1478878558.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:58.928Z,1478878558.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:59.333Z,1478878559.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:35:59.713Z,1478878559.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:00.117Z,1478878560.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:00.512Z,1478878560.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:00.943Z,1478878560.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:01.349Z,1478878561.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:01.716Z,1478878561.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:02.115Z,1478878562.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:02.554Z,1478878562.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:02.938Z,1478878562.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:03.338Z,1478878563.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:03.734Z,1478878563.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:04.121Z,1478878564.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:04.521Z,1478878564.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:04.569Z,1478878564.569 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T15:36:04.915Z,1478878564.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:05.319Z,1478878565.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:05.719Z,1478878565.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:06.121Z,1478878566.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:06.516Z,1478878566.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:06.924Z,1478878566.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:07.333Z,1478878567.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:07.724Z,1478878567.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:08.123Z,1478878568.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:08.526Z,1478878568.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:08.935Z,1478878568.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:09.333Z,1478878569.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:09.713Z,1478878569.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:10.117Z,1478878570.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:10.515Z,1478878570.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:10.929Z,1478878570.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:11.319Z,1478878571.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:11.724Z,1478878571.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:12.119Z,1478878572.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:12.529Z,1478878572.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:12.924Z,1478878572.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:13.317Z,1478878573.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:13.727Z,1478878573.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:14.141Z,1478878574.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:14.528Z,1478878574.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:14.924Z,1478878574.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:15.324Z,1478878575.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:15.756Z,1478878575.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:16.113Z,1478878576.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:16.511Z,1478878576.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:16.969Z,1478878576.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:17.315Z,1478878577.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:17.749Z,1478878577.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:18.152Z,1478878578.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:18.518Z,1478878578.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:18.925Z,1478878578.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:19.337Z,1478878579.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:19.722Z,1478878579.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:20.124Z,1478878580.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:20.525Z,1478878580.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:20.928Z,1478878580.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:21.337Z,1478878581.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:21.737Z,1478878581.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:22.109Z,1478878582.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:22.540Z,1478878582.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:22.908Z,1478878582.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:23.337Z,1478878583.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:23.720Z,1478878583.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:24.121Z,1478878584.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:24.517Z,1478878584.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:24.936Z,1478878584.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:25.333Z,1478878585.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:25.711Z,1478878585.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:26.116Z,1478878586.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:26.516Z,1478878586.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:26.920Z,1478878586.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:27.319Z,1478878587.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:27.725Z,1478878587.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:28.116Z,1478878588.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:31.641Z,1478878591.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:31.773Z,1478878591.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:32.153Z,1478878592.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:32.542Z,1478878592.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:32.957Z,1478878592.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:33.361Z,1478878593.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:33.725Z,1478878593.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:34.119Z,1478878594.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:34.529Z,1478878594.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:34.919Z,1478878594.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:35.323Z,1478878595.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:35.726Z,1478878595.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:36.122Z,1478878596.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:36.516Z,1478878596.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:36.921Z,1478878596.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:37.324Z,1478878597.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:37.719Z,1478878597.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:38.126Z,1478878598.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:38.522Z,1478878598.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:38.932Z,1478878598.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:39.330Z,1478878599.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:39.734Z,1478878599.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:40.136Z,1478878600.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:40.537Z,1478878600.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:40.942Z,1478878600.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:41.341Z,1478878601.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:41.721Z,1478878601.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:42.139Z,1478878602.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:42.522Z,1478878602.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:42.925Z,1478878602.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:43.352Z,1478878603.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:43.725Z,1478878603.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:44.145Z,1478878604.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:44.529Z,1478878604.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:44.930Z,1478878604.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:45.354Z,1478878605.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:45.725Z,1478878605.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:46.132Z,1478878606.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:46.572Z,1478878606.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:46.929Z,1478878606.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:47.345Z,1478878607.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:47.761Z,1478878607.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:48.133Z,1478878608.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:48.533Z,1478878608.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:48.936Z,1478878608.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:49.335Z,1478878609.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:49.741Z,1478878609.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:50.120Z,1478878610.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:50.521Z,1478878610.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:50.919Z,1478878610.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:51.324Z,1478878611.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:51.729Z,1478878611.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:52.123Z,1478878612.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:52.534Z,1478878612.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:52.937Z,1478878612.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:53.328Z,1478878613.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:53.735Z,1478878613.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:54.136Z,1478878614.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:54.536Z,1478878614.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:54.938Z,1478878614.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:55.341Z,1478878615.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:55.720Z,1478878615.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:56.124Z,1478878616.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:56.533Z,1478878616.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:56.933Z,1478878616.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:57.326Z,1478878617.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:57.734Z,1478878617.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:58.132Z,1478878618.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:58.553Z,1478878618.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:58.936Z,1478878618.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:59.341Z,1478878619.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:36:59.749Z,1478878619.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:00.123Z,1478878620.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:00.527Z,1478878620.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:00.959Z,1478878620.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:01.329Z,1478878621.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:01.763Z,1478878621.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:02.158Z,1478878622.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:02.535Z,1478878622.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:02.924Z,1478878622.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:03.329Z,1478878623.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:03.733Z,1478878623.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:04.132Z,1478878624.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:04.533Z,1478878624.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:04.940Z,1478878624.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:05.333Z,1478878625.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:05.735Z,1478878625.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:06.136Z,1478878626.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:06.532Z,1478878626.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:06.941Z,1478878626.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:07.336Z,1478878627.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:07.732Z,1478878627.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:08.121Z,1478878628.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:08.521Z,1478878628.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:08.921Z,1478878628.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:09.325Z,1478878629.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:09.734Z,1478878629.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:10.133Z,1478878630.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:10.537Z,1478878630.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:10.942Z,1478878630.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:11.340Z,1478878631.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:11.744Z,1478878631.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:12.157Z,1478878632.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:12.526Z,1478878632.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:12.950Z,1478878632.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:13.329Z,1478878633.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:13.727Z,1478878633.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:14.182Z,1478878634.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:14.530Z,1478878634.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:14.940Z,1478878634.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:15.366Z,1478878635.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:15.739Z,1478878635.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:16.149Z,1478878636.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:16.569Z,1478878636.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:16.967Z,1478878636.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:17.376Z,1478878637.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:17.745Z,1478878637.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:18.149Z,1478878638.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:18.526Z,1478878638.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:18.934Z,1478878638.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:19.336Z,1478878639.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:19.746Z,1478878639.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:20.133Z,1478878640.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:20.546Z,1478878640.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:20.940Z,1478878640.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:21.342Z,1478878641.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:21.745Z,1478878641.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:22.116Z,1478878642.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:22.554Z,1478878642.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:22.954Z,1478878642.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:23.322Z,1478878643.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:23.729Z,1478878643.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:24.187Z,1478878644.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:24.530Z,1478878644.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:24.928Z,1478878644.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:25.432Z,1478878645.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:25.756Z,1478878645.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:26.141Z,1478878646.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:26.530Z,1478878646.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:26.994Z,1478878646.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:27.037Z,1478878647.037 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T15:37:27.037Z,1478878647.037 [Default:CheckIn:C.Wait] Stopped
2016-11-11T15:37:27.038Z,1478878647.037 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T15:37:27.038Z,1478878647.038 [Default:CheckIn:D] Running Loop=1
2016-11-11T15:37:27.365Z,1478878647.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:27.391Z,1478878647.391 [Default:CheckIn:D] Stopped
2016-11-11T15:37:27.391Z,1478878647.391 [Default:CheckIn:E] Running Loop=1
2016-11-11T15:37:27.734Z,1478878647.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:27.789Z,1478878647.789 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 647.434701 min 
2016-11-11T15:37:27.789Z,1478878647.789 [Default:CheckIn:E] Stopped
2016-11-11T15:37:27.789Z,1478878647.789 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T15:37:27.789Z,1478878647.789 [Default:CheckIn] Stopped
2016-11-11T15:37:27.789Z,1478878647.789 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T15:37:27.790Z,1478878647.790 [Default:CheckIn](INFO): Running loop #63
2016-11-11T15:37:27.790Z,1478878647.790 [Default:CheckIn] Running Loop=63
2016-11-11T15:37:27.790Z,1478878647.790 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T15:37:27.790Z,1478878647.790 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T15:37:28.232Z,1478878648.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:34.984Z,1478878654.984 [NAL9602](INFO): Powering up
2016-11-11T15:37:35.072Z,1478878655.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:35.238Z,1478878655.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:35.646Z,1478878655.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:36.034Z,1478878656.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:36.496Z,1478878656.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:36.845Z,1478878656.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:37.253Z,1478878657.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:37.624Z,1478878657.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:38.021Z,1478878658.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:38.457Z,1478878658.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:38.832Z,1478878658.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:39.249Z,1478878659.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:39.641Z,1478878659.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:40.043Z,1478878660.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:40.453Z,1478878660.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:40.839Z,1478878660.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:41.246Z,1478878661.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:41.656Z,1478878661.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:42.029Z,1478878662.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:42.412Z,1478878662.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:42.811Z,1478878662.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:43.212Z,1478878663.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:43.612Z,1478878663.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:44.012Z,1478878664.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:44.409Z,1478878664.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:44.792Z,1478878664.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:45.214Z,1478878665.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:45.636Z,1478878665.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:45.961Z,1478878665.961 [NAL9602](INFO): NAL9602 initialized
2016-11-11T15:37:46.005Z,1478878666.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:46.409Z,1478878666.409 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:46.409Z,1478878666.409 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 196
2016-11-11T15:37:46.409Z,1478878666.409 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:37:46.416Z,1478878666.416 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:46.416Z,1478878666.416 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 196
2016-11-11T15:37:46.416Z,1478878666.416 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:37:46.418Z,1478878666.418 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:46.419Z,1478878666.418 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 196
2016-11-11T15:37:46.419Z,1478878666.418 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:37:46.449Z,1478878666.449 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:37:46.449Z,1478878666.449 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:37:46.449Z,1478878666.449 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:37:46.761Z,1478878666.761 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T15:37:46.761Z,1478878666.761 [NAL9602] Data Fault, FailCount= 5
2016-11-11T15:37:46.761Z,1478878666.761 [NAL9602](ERROR): Data Fault
2016-11-11T15:37:46.863Z,1478878666.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:37:46.863Z,1478878666.863 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 196
2016-11-11T15:37:46.868Z,1478878666.868 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:37:46.868Z,1478878666.868 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 196
2016-11-11T15:37:46.868Z,1478878666.868 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:37:46.869Z,1478878666.869 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 196
2016-11-11T15:37:46.869Z,1478878666.869 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T15:37:46.870Z,1478878666.870 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-11-11T15:37:47.169Z,1478878667.169 [NAL9602](INFO): Powering down
2016-11-11T15:37:47.228Z,1478878667.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:37:47.228Z,1478878667.228 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:37:47.229Z,1478878667.229 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:37:47.238Z,1478878667.238 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:37:47.238Z,1478878667.238 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:37:47.238Z,1478878667.239 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:37:47.239Z,1478878667.239 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:37:47.240Z,1478878667.240 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:37:47.240Z,1478878667.240 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:37:47.605Z,1478878667.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:48.053Z,1478878668.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:48.403Z,1478878668.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:48.806Z,1478878668.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:49.236Z,1478878669.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:49.612Z,1478878669.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:50.010Z,1478878670.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:50.437Z,1478878670.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:50.808Z,1478878670.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:51.222Z,1478878671.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:51.629Z,1478878671.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:52.011Z,1478878672.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:52.410Z,1478878672.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:52.812Z,1478878672.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:53.204Z,1478878673.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:53.613Z,1478878673.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:53.996Z,1478878673.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:54.400Z,1478878674.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:54.813Z,1478878674.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:55.198Z,1478878675.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:55.603Z,1478878675.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:56.009Z,1478878676.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:56.405Z,1478878676.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:56.802Z,1478878676.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:57.206Z,1478878677.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:57.605Z,1478878677.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:58.023Z,1478878678.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:58.411Z,1478878678.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:58.808Z,1478878678.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:59.215Z,1478878679.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:59.604Z,1478878679.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:37:59.996Z,1478878679.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:00.401Z,1478878680.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:00.797Z,1478878680.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:01.200Z,1478878681.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:01.605Z,1478878681.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:02.018Z,1478878682.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:02.405Z,1478878682.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:02.818Z,1478878682.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:03.207Z,1478878683.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:03.622Z,1478878683.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:04.009Z,1478878684.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:04.411Z,1478878684.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:04.837Z,1478878684.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:05.213Z,1478878685.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:05.629Z,1478878685.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:06.026Z,1478878686.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:06.408Z,1478878686.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:06.817Z,1478878686.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:07.197Z,1478878687.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:07.598Z,1478878687.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:07.994Z,1478878687.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:08.400Z,1478878688.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:08.809Z,1478878688.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:09.206Z,1478878689.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:09.598Z,1478878689.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:10.008Z,1478878690.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:10.410Z,1478878690.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:10.809Z,1478878690.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:11.226Z,1478878691.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:11.605Z,1478878691.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:12.009Z,1478878692.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:12.404Z,1478878692.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:12.804Z,1478878692.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:13.197Z,1478878693.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:13.596Z,1478878693.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:14.000Z,1478878694.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:14.397Z,1478878694.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:14.796Z,1478878694.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:15.196Z,1478878695.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:15.595Z,1478878695.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:15.997Z,1478878695.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:16.395Z,1478878696.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:16.792Z,1478878696.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:17.196Z,1478878697.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:17.603Z,1478878697.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:18.014Z,1478878698.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:18.396Z,1478878698.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:18.796Z,1478878698.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:19.214Z,1478878699.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:19.596Z,1478878699.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:20.021Z,1478878700.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:20.419Z,1478878700.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:20.796Z,1478878700.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:21.191Z,1478878701.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:21.596Z,1478878701.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:21.996Z,1478878701.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:22.395Z,1478878702.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:22.795Z,1478878702.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:23.196Z,1478878703.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:23.623Z,1478878703.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:23.995Z,1478878703.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:24.396Z,1478878704.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:24.809Z,1478878704.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:25.191Z,1478878705.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:25.602Z,1478878705.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:26.001Z,1478878706.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:26.393Z,1478878706.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:26.801Z,1478878706.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:27.212Z,1478878707.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:27.601Z,1478878707.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:27.991Z,1478878707.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:28.428Z,1478878708.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:31.974Z,1478878711.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:32.099Z,1478878712.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:32.577Z,1478878712.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:32.846Z,1478878712.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:33.252Z,1478878713.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:33.670Z,1478878713.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:34.047Z,1478878714.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:34.490Z,1478878714.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:34.900Z,1478878714.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:35.253Z,1478878715.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:35.648Z,1478878715.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:36.102Z,1478878716.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:36.463Z,1478878716.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:36.856Z,1478878716.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:37.254Z,1478878717.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:37.651Z,1478878717.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:38.062Z,1478878718.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:38.445Z,1478878718.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:38.849Z,1478878718.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:39.246Z,1478878719.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:39.653Z,1478878719.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:40.045Z,1478878720.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:40.451Z,1478878720.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:40.853Z,1478878720.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:41.253Z,1478878721.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:41.654Z,1478878721.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:42.047Z,1478878722.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:42.448Z,1478878722.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:42.863Z,1478878722.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:43.269Z,1478878723.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:43.645Z,1478878723.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:44.044Z,1478878724.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:44.443Z,1478878724.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:44.866Z,1478878724.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:45.244Z,1478878725.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:45.645Z,1478878725.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:46.058Z,1478878726.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:46.457Z,1478878726.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:46.902Z,1478878726.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:47.249Z,1478878727.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:47.656Z,1478878727.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:48.089Z,1478878728.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:48.459Z,1478878728.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:48.876Z,1478878728.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:49.281Z,1478878729.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:49.669Z,1478878729.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:50.052Z,1478878730.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:50.445Z,1478878730.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:50.853Z,1478878730.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:51.248Z,1478878731.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:51.650Z,1478878731.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:52.048Z,1478878732.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:52.448Z,1478878732.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:52.854Z,1478878732.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:53.253Z,1478878733.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:53.648Z,1478878733.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:54.061Z,1478878734.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:54.455Z,1478878734.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:54.855Z,1478878734.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:55.257Z,1478878735.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:55.656Z,1478878735.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:56.062Z,1478878736.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:56.455Z,1478878736.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:56.863Z,1478878736.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:57.243Z,1478878737.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:57.650Z,1478878737.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:58.046Z,1478878738.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:58.446Z,1478878738.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:58.866Z,1478878738.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:59.265Z,1478878739.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:38:59.655Z,1478878739.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:00.057Z,1478878740.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:00.458Z,1478878740.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:00.886Z,1478878740.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:01.255Z,1478878741.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:01.689Z,1478878741.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:02.063Z,1478878742.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:02.468Z,1478878742.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:02.884Z,1478878742.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:03.246Z,1478878743.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:03.689Z,1478878743.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:04.086Z,1478878744.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:04.480Z,1478878744.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:04.855Z,1478878744.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:05.250Z,1478878745.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:05.653Z,1478878745.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:06.062Z,1478878746.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:06.457Z,1478878746.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:06.851Z,1478878746.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:07.250Z,1478878747.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:07.666Z,1478878747.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:08.047Z,1478878748.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:08.458Z,1478878748.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:08.851Z,1478878748.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:09.267Z,1478878749.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:09.669Z,1478878749.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:10.048Z,1478878750.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:10.446Z,1478878750.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:10.865Z,1478878750.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:11.254Z,1478878751.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:11.651Z,1478878751.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:12.051Z,1478878752.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:12.518Z,1478878752.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:12.860Z,1478878752.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:13.251Z,1478878753.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:13.653Z,1478878753.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:14.057Z,1478878754.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:14.509Z,1478878754.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:14.859Z,1478878754.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:15.241Z,1478878755.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:15.666Z,1478878755.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:16.109Z,1478878756.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:16.470Z,1478878756.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:16.882Z,1478878756.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:17.277Z,1478878757.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:17.682Z,1478878757.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:18.085Z,1478878758.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:18.461Z,1478878758.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:18.865Z,1478878758.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:19.241Z,1478878759.241 [PNI_TCM](ERROR): CRC does not match. Expected:0x54923 got:0x47900
2016-11-11T15:39:19.269Z,1478878759.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:19.660Z,1478878759.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:20.052Z,1478878760.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:20.461Z,1478878760.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:20.851Z,1478878760.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:21.242Z,1478878761.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:21.647Z,1478878761.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:22.048Z,1478878762.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:22.453Z,1478878762.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:22.849Z,1478878762.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:23.239Z,1478878763.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:23.668Z,1478878763.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:24.048Z,1478878764.048 [PNI_TCM](ERROR): CRC does not match. Expected:0x49801 got:0x59136
2016-11-11T15:39:24.074Z,1478878764.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:24.523Z,1478878764.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:24.859Z,1478878764.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:25.246Z,1478878765.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:25.645Z,1478878765.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:26.053Z,1478878766.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:26.524Z,1478878766.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:26.859Z,1478878766.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:27.254Z,1478878767.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:27.652Z,1478878767.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:28.050Z,1478878768.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:28.510Z,1478878768.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:31.877Z,1478878771.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:32.007Z,1478878772.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:32.375Z,1478878772.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:32.780Z,1478878772.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:33.216Z,1478878773.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:33.581Z,1478878773.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:34.020Z,1478878774.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:34.401Z,1478878774.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:34.783Z,1478878774.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:35.184Z,1478878775.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:35.584Z,1478878775.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:35.996Z,1478878775.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:36.388Z,1478878776.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:36.787Z,1478878776.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:37.188Z,1478878777.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:37.581Z,1478878777.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:37.988Z,1478878777.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:38.373Z,1478878778.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:38.788Z,1478878778.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:39.187Z,1478878779.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:39.589Z,1478878779.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:39.988Z,1478878779.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:40.399Z,1478878780.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:40.783Z,1478878780.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:41.177Z,1478878781.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:41.576Z,1478878781.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:41.973Z,1478878781.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:42.388Z,1478878782.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:42.773Z,1478878782.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:43.177Z,1478878783.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:43.574Z,1478878783.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:43.978Z,1478878783.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:44.377Z,1478878784.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:44.782Z,1478878784.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:45.177Z,1478878785.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:45.585Z,1478878785.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:45.984Z,1478878785.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:46.429Z,1478878786.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:46.799Z,1478878786.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:46.819Z,1478878786.819 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T15:39:46.819Z,1478878786.819 [NAL9602] No Fault, FailCount= 5
2016-11-11T15:39:47.145Z,1478878787.145 [NAL9602](INFO): Powering up NAL9602
2016-11-11T15:39:47.217Z,1478878787.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:47.572Z,1478878787.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:48.007Z,1478878788.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:48.407Z,1478878788.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:48.775Z,1478878788.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:49.181Z,1478878789.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:49.590Z,1478878789.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:49.978Z,1478878789.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:50.380Z,1478878790.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:50.796Z,1478878790.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:51.184Z,1478878791.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:51.594Z,1478878791.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:51.984Z,1478878791.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:52.368Z,1478878792.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:52.781Z,1478878792.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:53.176Z,1478878793.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:53.574Z,1478878793.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:53.990Z,1478878793.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:54.419Z,1478878794.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:54.789Z,1478878794.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:55.183Z,1478878795.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:55.588Z,1478878795.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:55.989Z,1478878795.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:56.426Z,1478878796.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:56.780Z,1478878796.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:57.205Z,1478878797.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:57.580Z,1478878797.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:58.004Z,1478878798.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:58.337Z,1478878798.337 [NAL9602](INFO): NAL9602 initialized
2016-11-11T15:39:58.436Z,1478878798.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:58.792Z,1478878798.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:59.198Z,1478878799.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:59.595Z,1478878799.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:39:59.000Z,1478878800.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:00.433Z,1478878800.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:00.796Z,1478878800.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:01.214Z,1478878801.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:01.604Z,1478878801.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:02.025Z,1478878802.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:02.371Z,1478878802.371 [PNI_TCM](ERROR): CRC does not match. Expected:0x59199 got:0x48411
2016-11-11T15:40:02.390Z,1478878802.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:02.808Z,1478878802.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:03.178Z,1478878803.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:03.594Z,1478878803.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:03.974Z,1478878803.974 [PNI_TCM](ERROR): CRC does not match. Expected:0x17432 got:0x33419
2016-11-11T15:40:04.002Z,1478878804.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:04.382Z,1478878804.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:04.785Z,1478878804.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:05.189Z,1478878805.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:05.595Z,1478878805.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:06.000Z,1478878806.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:06.428Z,1478878806.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:06.781Z,1478878806.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:07.213Z,1478878807.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:07.585Z,1478878807.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:07.979Z,1478878807.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:08.452Z,1478878808.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:08.771Z,1478878808.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:09.174Z,1478878809.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:09.576Z,1478878809.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:10.001Z,1478878810.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:10.407Z,1478878810.407 [PNI_TCM](ERROR): CRC does not match. Expected:0x39811 got:0x16871
2016-11-11T15:40:10.462Z,1478878810.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:10.788Z,1478878810.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:11.185Z,1478878811.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:11.581Z,1478878811.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:11.989Z,1478878811.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:12.451Z,1478878812.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:12.793Z,1478878812.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:13.196Z,1478878813.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:13.562Z,1478878813.562 [PNI_TCM](ERROR): CRC does not match. Expected:0x59414 got:0x185
2016-11-11T15:40:13.602Z,1478878813.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:13.993Z,1478878813.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:14.372Z,1478878814.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:14.825Z,1478878814.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:15.179Z,1478878815.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:15.586Z,1478878815.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:16.025Z,1478878816.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:16.383Z,1478878816.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:16.834Z,1478878816.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:17.186Z,1478878817.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:17.601Z,1478878817.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:17.988Z,1478878817.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:18.389Z,1478878818.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:18.776Z,1478878818.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:19.188Z,1478878819.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:19.583Z,1478878819.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:19.981Z,1478878819.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:20.433Z,1478878820.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:20.793Z,1478878820.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:21.193Z,1478878821.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:21.572Z,1478878821.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:21.979Z,1478878821.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:22.406Z,1478878822.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:22.792Z,1478878822.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:23.193Z,1478878823.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:23.600Z,1478878823.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:23.997Z,1478878823.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:24.435Z,1478878824.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:24.781Z,1478878824.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:25.181Z,1478878825.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:25.576Z,1478878825.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:25.980Z,1478878825.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:26.441Z,1478878826.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:26.782Z,1478878826.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:27.181Z,1478878827.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:27.577Z,1478878827.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:27.980Z,1478878827.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:28.385Z,1478878828.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:28.798Z,1478878828.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:32.173Z,1478878832.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:32.308Z,1478878832.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:32.682Z,1478878832.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:33.121Z,1478878833.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:33.468Z,1478878833.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:33.907Z,1478878833.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:34.270Z,1478878834.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:34.699Z,1478878834.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:35.064Z,1478878835.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:35.468Z,1478878835.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:35.868Z,1478878835.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:36.266Z,1478878836.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:36.665Z,1478878836.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:37.066Z,1478878837.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:37.466Z,1478878837.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:37.868Z,1478878837.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:38.271Z,1478878838.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:38.673Z,1478878838.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:39.077Z,1478878839.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:39.470Z,1478878839.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:39.873Z,1478878839.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:40.261Z,1478878840.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:40.684Z,1478878840.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:41.089Z,1478878841.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:41.501Z,1478878841.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:41.572Z,1478878841.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:40:41.878Z,1478878841.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:42.265Z,1478878842.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:42.368Z,1478878842.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:40:42.670Z,1478878842.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:42.856Z,1478878842.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:40:43.068Z,1478878843.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:43.473Z,1478878843.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:43.652Z,1478878843.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:40:43.868Z,1478878843.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:44.275Z,1478878844.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:44.448Z,1478878844.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:40:44.676Z,1478878844.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:45.081Z,1478878845.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:45.220Z,1478878845.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:40:45.486Z,1478878845.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:45.877Z,1478878845.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:46.016Z,1478878846.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:40:46.280Z,1478878846.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:46.729Z,1478878846.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:46.812Z,1478878846.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:40:47.065Z,1478878847.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:47.224Z,1478878847.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:40:47.502Z,1478878847.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:47.502Z,1478878847.502 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 197
2016-11-11T15:40:47.502Z,1478878847.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:40:47.509Z,1478878847.509 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:47.509Z,1478878847.509 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 197
2016-11-11T15:40:47.509Z,1478878847.509 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:40:47.511Z,1478878847.511 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:47.511Z,1478878847.511 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 197
2016-11-11T15:40:47.511Z,1478878847.511 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:40:47.526Z,1478878847.526 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:40:47.526Z,1478878847.526 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:40:47.526Z,1478878847.526 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:40:47.887Z,1478878847.887 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:40:47.887Z,1478878847.887 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 197
2016-11-11T15:40:47.904Z,1478878847.904 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:40:47.904Z,1478878847.904 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 197
2016-11-11T15:40:47.904Z,1478878847.904 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:40:47.905Z,1478878847.905 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 197
2016-11-11T15:40:48.020Z,1478878848.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:40:48.321Z,1478878848.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:40:48.322Z,1478878848.322 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:40:48.323Z,1478878848.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:40:48.363Z,1478878848.363 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:40:48.364Z,1478878848.364 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:40:48.365Z,1478878848.365 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:40:48.365Z,1478878848.365 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:40:48.366Z,1478878848.366 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:40:48.367Z,1478878848.367 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:40:48.703Z,1478878848.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:48.744Z,1478878848.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:40:49.089Z,1478878849.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:49.498Z,1478878849.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:49.882Z,1478878849.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:50.297Z,1478878850.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:50.683Z,1478878850.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:51.084Z,1478878851.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:51.479Z,1478878851.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:51.881Z,1478878851.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:52.284Z,1478878852.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:52.689Z,1478878852.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:53.088Z,1478878853.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:53.482Z,1478878853.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:53.891Z,1478878853.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:54.284Z,1478878854.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:54.698Z,1478878854.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:55.072Z,1478878855.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:55.472Z,1478878855.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:55.874Z,1478878855.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:56.277Z,1478878856.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:56.682Z,1478878856.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:56.872Z,1478878856.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:40:57.078Z,1478878857.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:57.472Z,1478878857.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:57.668Z,1478878857.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:40:57.872Z,1478878857.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:58.277Z,1478878858.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:58.684Z,1478878858.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:59.091Z,1478878859.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:59.476Z,1478878859.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:40:59.877Z,1478878859.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:00.283Z,1478878860.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:00.709Z,1478878860.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:01.079Z,1478878861.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:01.479Z,1478878861.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:01.880Z,1478878861.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:02.264Z,1478878862.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:02.669Z,1478878862.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:03.079Z,1478878863.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:03.477Z,1478878863.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:03.866Z,1478878863.866 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:41:03.866Z,1478878863.866 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:41:03.867Z,1478878863.866 [BPC1](ERROR): Communications Fault
2016-11-11T15:41:03.874Z,1478878863.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:03.894Z,1478878863.894 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:41:04.326Z,1478878864.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:04.674Z,1478878864.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:05.079Z,1478878865.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:05.122Z,1478878865.122 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:41:05.122Z,1478878865.122 [BPC1] No Fault, FailCount= 1
2016-11-11T15:41:05.533Z,1478878865.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:05.885Z,1478878865.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:06.328Z,1478878866.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:06.680Z,1478878866.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:07.085Z,1478878867.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:07.478Z,1478878867.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:07.885Z,1478878867.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:08.301Z,1478878868.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:08.721Z,1478878868.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:09.084Z,1478878869.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:09.485Z,1478878869.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:09.548Z,1478878869.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:41:09.887Z,1478878869.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:10.267Z,1478878870.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:10.344Z,1478878870.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:41:10.687Z,1478878870.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:10.812Z,1478878870.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:41:11.071Z,1478878871.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:11.473Z,1478878871.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:11.608Z,1478878871.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:41:11.870Z,1478878871.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:12.303Z,1478878872.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:12.404Z,1478878872.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:41:12.670Z,1478878872.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:13.062Z,1478878873.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:13.477Z,1478878873.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:13.874Z,1478878873.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:14.281Z,1478878874.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:14.681Z,1478878874.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:15.077Z,1478878875.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:15.481Z,1478878875.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:15.877Z,1478878875.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:16.344Z,1478878876.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:16.662Z,1478878876.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:17.075Z,1478878877.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:17.477Z,1478878877.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:17.881Z,1478878877.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:18.367Z,1478878878.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:18.673Z,1478878878.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:19.081Z,1478878879.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:19.477Z,1478878879.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:19.870Z,1478878879.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:20.333Z,1478878880.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:20.704Z,1478878880.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:21.075Z,1478878881.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:21.464Z,1478878881.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:21.873Z,1478878881.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:22.318Z,1478878882.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:22.670Z,1478878882.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:23.071Z,1478878883.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:23.485Z,1478878883.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:23.864Z,1478878883.864 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:41:23.864Z,1478878883.864 [BPC1] Communications Fault, FailCount= 2
2016-11-11T15:41:23.864Z,1478878883.864 [BPC1](ERROR): Communications Fault
2016-11-11T15:41:23.874Z,1478878883.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:23.894Z,1478878883.894 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:41:24.280Z,1478878884.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:24.677Z,1478878884.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:25.080Z,1478878885.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:25.102Z,1478878885.102 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:41:25.102Z,1478878885.102 [BPC1] No Fault, FailCount= 2
2016-11-11T15:41:25.522Z,1478878885.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:25.903Z,1478878885.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:26.230Z,1478878886.230 [NAL9602](INFO): SBD MO Status=2, MOMSN=348, MT Status=2, MTMSN=0
2016-11-11T15:41:26.230Z,1478878886.230 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T15:41:26.271Z,1478878886.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:26.693Z,1478878886.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:27.077Z,1478878887.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:27.470Z,1478878887.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:27.872Z,1478878887.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:28.280Z,1478878888.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:28.670Z,1478878888.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:29.084Z,1478878889.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:32.747Z,1478878892.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:32.909Z,1478878892.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:33.261Z,1478878893.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:33.654Z,1478878893.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:34.042Z,1478878894.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:34.450Z,1478878894.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:34.853Z,1478878894.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:35.249Z,1478878895.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:35.654Z,1478878895.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:36.049Z,1478878896.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:36.473Z,1478878896.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:36.846Z,1478878896.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:37.249Z,1478878897.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:37.648Z,1478878897.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:38.058Z,1478878898.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:38.446Z,1478878898.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:38.865Z,1478878898.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:39.262Z,1478878899.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:39.649Z,1478878899.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:40.052Z,1478878900.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:40.457Z,1478878900.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:40.837Z,1478878900.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:41.240Z,1478878901.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:41.650Z,1478878901.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:42.047Z,1478878902.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:42.438Z,1478878902.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:42.840Z,1478878902.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:43.243Z,1478878903.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:43.643Z,1478878903.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:44.045Z,1478878904.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:44.445Z,1478878904.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:44.845Z,1478878904.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:45.244Z,1478878905.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:45.645Z,1478878905.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:46.053Z,1478878906.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:46.450Z,1478878906.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:46.849Z,1478878906.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:47.249Z,1478878907.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:47.649Z,1478878907.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:48.045Z,1478878908.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:48.453Z,1478878908.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:48.849Z,1478878908.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:49.256Z,1478878909.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:49.658Z,1478878909.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:50.057Z,1478878910.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:50.473Z,1478878910.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:50.881Z,1478878910.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:51.253Z,1478878911.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:51.640Z,1478878911.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:52.067Z,1478878912.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:52.447Z,1478878912.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:52.877Z,1478878912.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:53.280Z,1478878913.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:53.647Z,1478878913.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:54.051Z,1478878914.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:54.451Z,1478878914.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:54.849Z,1478878914.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:55.256Z,1478878915.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:55.650Z,1478878915.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:56.049Z,1478878916.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:56.453Z,1478878916.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:56.849Z,1478878916.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:57.261Z,1478878917.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:57.653Z,1478878917.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:58.049Z,1478878918.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:58.461Z,1478878918.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:58.861Z,1478878918.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:59.238Z,1478878919.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:41:59.637Z,1478878919.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:00.042Z,1478878920.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:00.446Z,1478878920.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:00.846Z,1478878920.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:01.250Z,1478878921.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:01.649Z,1478878921.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:02.053Z,1478878922.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:02.453Z,1478878922.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:02.845Z,1478878922.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:03.250Z,1478878923.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:03.649Z,1478878923.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:04.073Z,1478878924.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:04.450Z,1478878924.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:04.853Z,1478878924.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:05.278Z,1478878925.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:05.653Z,1478878925.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:06.053Z,1478878926.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:06.496Z,1478878926.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:06.853Z,1478878926.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:07.265Z,1478878927.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:07.669Z,1478878927.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:08.033Z,1478878928.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:08.437Z,1478878928.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:08.873Z,1478878928.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:09.290Z,1478878929.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:09.658Z,1478878929.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:10.056Z,1478878930.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:10.464Z,1478878930.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:10.839Z,1478878930.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:11.247Z,1478878931.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:11.697Z,1478878931.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:12.052Z,1478878932.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:12.458Z,1478878932.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:12.860Z,1478878932.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:13.262Z,1478878933.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:13.609Z,1478878933.609 [NAL9602](INFO): SBD MO Status=2, MOMSN=348, MT Status=2, MTMSN=0
2016-11-11T15:42:13.609Z,1478878933.609 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T15:42:13.665Z,1478878933.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:14.070Z,1478878934.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:14.455Z,1478878934.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:14.839Z,1478878934.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:15.289Z,1478878935.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:15.667Z,1478878935.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:16.058Z,1478878936.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:16.472Z,1478878936.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:16.841Z,1478878936.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:17.241Z,1478878937.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:17.646Z,1478878937.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:18.086Z,1478878938.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:18.497Z,1478878938.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:18.861Z,1478878938.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:19.278Z,1478878939.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:19.689Z,1478878939.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:20.041Z,1478878940.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:20.518Z,1478878940.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:20.840Z,1478878940.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:21.289Z,1478878941.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:21.689Z,1478878941.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:22.047Z,1478878942.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:22.464Z,1478878942.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:22.858Z,1478878942.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:23.266Z,1478878943.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:23.672Z,1478878943.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:24.082Z,1478878944.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:24.458Z,1478878944.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:24.858Z,1478878944.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:25.307Z,1478878945.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:25.673Z,1478878945.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:26.078Z,1478878946.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:26.460Z,1478878946.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:26.868Z,1478878946.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:27.256Z,1478878947.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:27.657Z,1478878947.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:28.062Z,1478878948.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:28.095Z,1478878948.095 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T15:37:27.8Z
2016-11-11T15:42:28.096Z,1478878948.096 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T15:42:28.096Z,1478878948.096 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T15:42:28.448Z,1478878948.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:30.063Z,1478878950.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:30.330Z,1478878950.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:37.003Z,1478878957.003 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:42:37.003Z,1478878957.003 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:42:37.004Z,1478878957.003 [BPC1](ERROR): Communications Fault
2016-11-11T15:42:37.045Z,1478878957.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:37.123Z,1478878957.123 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:42:37.143Z,1478878957.143 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20161111T044527/Courier0252.lzma
2016-11-11T15:42:37.237Z,1478878957.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:37.583Z,1478878957.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:37.934Z,1478878957.934 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0252.lzma.bak
2016-11-11T15:42:37.934Z,1478878957.934 [DataOverHttps](INFO): SBD MOMSN=4555536
2016-11-11T15:42:38.097Z,1478878958.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:38.175Z,1478878958.175 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:42:38.176Z,1478878958.175 [BPC1] No Fault, FailCount= 1
2016-11-11T15:42:58.749Z,1478878978.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:42:58.892Z,1478878978.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:02.454Z,1478878982.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:02.574Z,1478878982.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:02.985Z,1478878982.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:03.367Z,1478878983.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:03.759Z,1478878983.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:04.177Z,1478878984.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:07.764Z,1478878987.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:07.824Z,1478878987.824 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20161111T044527/Express0253.lzma
2016-11-11T15:43:07.906Z,1478878987.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:08.277Z,1478878988.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:08.621Z,1478878988.621 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0253.lzma.bak
2016-11-11T15:43:08.622Z,1478878988.622 [DataOverHttps](INFO): SBD MOMSN=4555540
2016-11-11T15:43:08.682Z,1478878988.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:09.945Z,1478878989.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:09.974Z,1478878989.974 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T15:43:09.975Z,1478878989.974 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T15:43:09.975Z,1478878989.975 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T15:43:10.144Z,1478878990.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:13.599Z,1478878993.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:13.745Z,1478878993.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:14.159Z,1478878994.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:14.526Z,1478878994.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:14.894Z,1478878994.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:15.316Z,1478878995.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:15.322Z,1478878995.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:15.721Z,1478878995.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:16.100Z,1478878996.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:16.112Z,1478878996.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:16.489Z,1478878996.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:16.600Z,1478878996.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:16.925Z,1478878996.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:17.295Z,1478878997.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:17.396Z,1478878997.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:17.689Z,1478878997.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:18.097Z,1478878998.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:18.192Z,1478878998.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:18.499Z,1478878998.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:18.915Z,1478878998.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:18.972Z,1478878998.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:19.312Z,1478878999.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:19.705Z,1478878999.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:19.769Z,1478878999.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:20.089Z,1478879000.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:20.489Z,1478879000.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:20.564Z,1478879000.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:20.901Z,1478879000.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:20.976Z,1478879000.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:21.303Z,1478879001.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:21.713Z,1478879001.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:21.772Z,1478879001.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:22.159Z,1478879002.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:22.509Z,1478879002.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:22.516Z,1478879002.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:22.902Z,1478879002.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:23.305Z,1478879003.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:23.709Z,1478879003.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:24.151Z,1478879004.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:24.506Z,1478879004.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:24.907Z,1478879004.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:25.309Z,1478879005.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:25.706Z,1478879005.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:26.178Z,1478879006.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:26.553Z,1478879006.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:26.894Z,1478879006.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:27.301Z,1478879007.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:27.701Z,1478879007.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:28.170Z,1478879008.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:28.513Z,1478879008.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:28.919Z,1478879008.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:29.333Z,1478879009.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:29.687Z,1478879009.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:30.122Z,1478879010.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:30.521Z,1478879010.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:30.910Z,1478879010.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:31.285Z,1478879011.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:31.368Z,1478879011.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:31.689Z,1478879011.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:32.093Z,1478879012.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:32.164Z,1478879012.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:32.580Z,1478879012.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:32.904Z,1478879012.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:33.313Z,1478879013.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:33.707Z,1478879013.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:34.104Z,1478879014.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:34.595Z,1478879014.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:34.904Z,1478879014.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:35.301Z,1478879015.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:35.705Z,1478879015.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:36.157Z,1478879016.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:36.508Z,1478879016.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:36.908Z,1478879016.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:37.363Z,1478879017.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:37.706Z,1478879017.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:38.128Z,1478879018.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:38.492Z,1478879018.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:38.896Z,1478879018.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:39.300Z,1478879019.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:39.705Z,1478879019.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:40.155Z,1478879020.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:40.500Z,1478879020.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:40.921Z,1478879020.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:41.317Z,1478879021.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:41.710Z,1478879021.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:42.132Z,1478879022.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:42.533Z,1478879022.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:42.902Z,1478879022.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:43.293Z,1478879023.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:43.304Z,1478879023.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:43.733Z,1478879023.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:44.100Z,1478879024.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:44.102Z,1478879024.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:44.525Z,1478879024.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:44.580Z,1478879024.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:44.913Z,1478879024.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:45.333Z,1478879025.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:45.376Z,1478879025.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:45.709Z,1478879025.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:46.172Z,1478879026.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:43:46.222Z,1478879026.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:46.561Z,1478879026.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:46.891Z,1478879026.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:47.301Z,1478879027.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:47.691Z,1478879027.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:48.097Z,1478879028.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:48.556Z,1478879028.556 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:48.556Z,1478879028.556 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 198
2016-11-11T15:43:48.556Z,1478879028.556 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:43:48.575Z,1478879028.575 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:48.576Z,1478879028.576 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 198
2016-11-11T15:43:48.576Z,1478879028.576 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:43:48.578Z,1478879028.578 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:48.578Z,1478879028.578 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 198
2016-11-11T15:43:48.578Z,1478879028.578 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:43:48.608Z,1478879028.608 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:43:48.609Z,1478879028.609 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:43:48.609Z,1478879028.609 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:43:48.925Z,1478879028.925 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:43:48.925Z,1478879028.925 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 198
2016-11-11T15:43:48.925Z,1478879028.925 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:43:48.925Z,1478879028.925 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 198
2016-11-11T15:43:48.926Z,1478879028.926 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:43:48.926Z,1478879028.926 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 198
2016-11-11T15:43:49.296Z,1478879029.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:43:49.296Z,1478879029.296 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:43:49.297Z,1478879029.297 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:43:49.301Z,1478879029.301 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:43:49.302Z,1478879029.302 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:43:49.302Z,1478879029.302 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:43:49.302Z,1478879029.302 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:43:49.303Z,1478879029.303 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:43:49.303Z,1478879029.303 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:43:49.717Z,1478879029.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:50.120Z,1478879030.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:50.502Z,1478879030.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:50.889Z,1478879030.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:51.298Z,1478879031.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:51.701Z,1478879031.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:52.097Z,1478879032.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:52.501Z,1478879032.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:52.912Z,1478879032.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:53.303Z,1478879033.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:53.706Z,1478879033.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:54.108Z,1478879034.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:54.506Z,1478879034.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:54.913Z,1478879034.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:55.305Z,1478879035.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:55.704Z,1478879035.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:56.130Z,1478879036.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:56.489Z,1478879036.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:56.925Z,1478879036.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:57.329Z,1478879037.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:57.692Z,1478879037.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:58.149Z,1478879038.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:58.523Z,1478879038.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:58.934Z,1478879038.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:59.289Z,1478879039.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:43:59.745Z,1478879039.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:00.092Z,1478879040.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:00.550Z,1478879040.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:00.901Z,1478879040.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:01.295Z,1478879041.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:01.693Z,1478879041.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:02.094Z,1478879042.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:02.534Z,1478879042.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:02.906Z,1478879042.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:03.306Z,1478879043.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:03.706Z,1478879043.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:04.101Z,1478879044.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:04.489Z,1478879044.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:04.893Z,1478879044.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:05.293Z,1478879045.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:05.697Z,1478879045.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:06.098Z,1478879046.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:06.501Z,1478879046.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:06.899Z,1478879046.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:07.313Z,1478879047.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:07.702Z,1478879047.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:08.099Z,1478879048.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:08.495Z,1478879048.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:08.894Z,1478879048.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:09.305Z,1478879049.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:09.702Z,1478879049.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:10.101Z,1478879050.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:10.504Z,1478879050.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:14.117Z,1478879054.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:14.238Z,1478879054.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:14.629Z,1478879054.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:15.042Z,1478879055.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:15.429Z,1478879055.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:15.873Z,1478879055.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:16.266Z,1478879056.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:16.628Z,1478879056.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:17.029Z,1478879057.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:17.429Z,1478879057.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:17.828Z,1478879057.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:18.229Z,1478879058.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:18.629Z,1478879058.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:19.028Z,1478879059.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:19.427Z,1478879059.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:19.832Z,1478879059.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:20.239Z,1478879060.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:20.631Z,1478879060.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:21.037Z,1478879061.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:21.429Z,1478879061.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:21.813Z,1478879061.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:22.213Z,1478879062.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:22.613Z,1478879062.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:23.017Z,1478879063.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:23.417Z,1478879063.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:23.843Z,1478879063.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:24.225Z,1478879064.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:24.616Z,1478879064.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:25.020Z,1478879065.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:25.425Z,1478879065.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:25.821Z,1478879065.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:26.229Z,1478879066.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:26.625Z,1478879066.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:27.022Z,1478879067.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:27.425Z,1478879067.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:27.827Z,1478879067.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:28.228Z,1478879068.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:28.661Z,1478879068.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:29.037Z,1478879069.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:29.454Z,1478879069.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:29.821Z,1478879069.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:30.247Z,1478879070.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:30.644Z,1478879070.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:31.021Z,1478879071.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:31.424Z,1478879071.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:31.816Z,1478879071.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:32.222Z,1478879072.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:32.625Z,1478879072.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:33.021Z,1478879073.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:33.425Z,1478879073.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:33.816Z,1478879073.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:34.225Z,1478879074.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:34.618Z,1478879074.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:35.024Z,1478879075.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:35.427Z,1478879075.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:35.818Z,1478879075.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:36.224Z,1478879076.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:36.629Z,1478879076.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:37.024Z,1478879077.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:37.422Z,1478879077.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:37.833Z,1478879077.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:38.225Z,1478879078.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:38.625Z,1478879078.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:39.029Z,1478879079.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:39.428Z,1478879079.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:39.828Z,1478879079.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:40.230Z,1478879080.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:40.628Z,1478879080.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:41.028Z,1478879081.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:41.421Z,1478879081.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:41.832Z,1478879081.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:42.229Z,1478879082.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:42.638Z,1478879082.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:43.049Z,1478879083.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:43.421Z,1478879083.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:43.844Z,1478879083.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:44.178Z,1478879084.178 [NAL9602](INFO): SBD MO Status=0, MOMSN=348, MT Status=0, MTMSN=0
2016-11-11T15:44:44.178Z,1478879084.178 [NAL9602](INFO): No messages in MT queue
2016-11-11T15:44:44.178Z,1478879084.178 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2016-11-11T15:44:44.228Z,1478879084.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:44.657Z,1478879084.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:45.057Z,1478879085.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:45.414Z,1478879085.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:45.825Z,1478879085.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:46.216Z,1478879086.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:46.615Z,1478879086.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:47.021Z,1478879087.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:47.426Z,1478879087.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:47.818Z,1478879087.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:48.227Z,1478879088.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:48.622Z,1478879088.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:49.017Z,1478879089.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:49.423Z,1478879089.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:49.776Z,1478879089.776 [NAL9602](INFO): Powering down
2016-11-11T15:44:49.843Z,1478879089.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:50.214Z,1478879090.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:50.621Z,1478879090.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:51.014Z,1478879091.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:51.414Z,1478879091.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:51.814Z,1478879091.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:52.221Z,1478879092.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:52.624Z,1478879092.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:53.023Z,1478879093.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:53.419Z,1478879093.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:53.818Z,1478879093.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:54.225Z,1478879094.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:54.634Z,1478879094.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:55.021Z,1478879095.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:55.433Z,1478879095.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:55.813Z,1478879095.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:56.212Z,1478879096.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:56.619Z,1478879096.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:57.050Z,1478879097.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:57.461Z,1478879097.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:57.823Z,1478879097.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:58.221Z,1478879098.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:58.666Z,1478879098.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:59.024Z,1478879099.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:59.442Z,1478879099.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:44:59.849Z,1478879099.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:00.214Z,1478879100.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:00.621Z,1478879100.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:01.016Z,1478879101.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:01.416Z,1478879101.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:01.824Z,1478879101.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:02.223Z,1478879102.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:02.629Z,1478879102.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:03.028Z,1478879103.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:03.416Z,1478879103.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:03.832Z,1478879103.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:04.216Z,1478879104.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:04.613Z,1478879104.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:05.030Z,1478879105.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:05.414Z,1478879105.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:05.821Z,1478879105.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:06.226Z,1478879106.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:06.617Z,1478879106.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:07.021Z,1478879107.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:07.429Z,1478879107.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:07.824Z,1478879107.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:08.224Z,1478879108.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:08.625Z,1478879108.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:09.025Z,1478879109.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:09.428Z,1478879109.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:09.828Z,1478879109.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:10.228Z,1478879110.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:10.627Z,1478879110.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:14.121Z,1478879114.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:14.253Z,1478879114.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:14.635Z,1478879114.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:15.005Z,1478879115.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:15.443Z,1478879115.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:15.839Z,1478879115.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:16.213Z,1478879116.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:16.605Z,1478879116.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:17.009Z,1478879117.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:17.398Z,1478879117.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:17.792Z,1478879117.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:18.206Z,1478879118.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:18.606Z,1478879118.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:18.999Z,1478879118.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:19.407Z,1478879119.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:19.799Z,1478879119.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:20.202Z,1478879120.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:20.618Z,1478879120.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:21.013Z,1478879121.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:21.404Z,1478879121.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:21.811Z,1478879121.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:22.210Z,1478879122.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:22.600Z,1478879122.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:23.019Z,1478879123.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:23.417Z,1478879123.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:23.797Z,1478879123.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:24.197Z,1478879124.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:24.601Z,1478879124.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:24.992Z,1478879124.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:25.399Z,1478879125.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:25.806Z,1478879125.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:26.200Z,1478879126.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:26.609Z,1478879126.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:27.022Z,1478879127.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:27.408Z,1478879127.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:27.867Z,1478879127.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:28.199Z,1478879128.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:28.600Z,1478879128.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:29.044Z,1478879129.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:29.405Z,1478879129.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:29.909Z,1478879129.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:30.235Z,1478879130.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:30.608Z,1478879130.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:31.000Z,1478879131.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:31.408Z,1478879131.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:31.814Z,1478879131.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:32.205Z,1478879132.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:32.608Z,1478879132.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:33.001Z,1478879133.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:33.402Z,1478879133.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:33.806Z,1478879133.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:34.204Z,1478879134.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:34.599Z,1478879134.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:35.009Z,1478879135.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:35.409Z,1478879135.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:35.802Z,1478879135.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:36.206Z,1478879136.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:36.613Z,1478879136.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:37.004Z,1478879137.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:37.408Z,1478879137.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:37.802Z,1478879137.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:38.206Z,1478879138.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:38.620Z,1478879138.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:39.002Z,1478879139.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:39.400Z,1478879139.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:39.812Z,1478879139.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:40.209Z,1478879140.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:40.609Z,1478879140.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:41.042Z,1478879141.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:41.412Z,1478879141.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:41.809Z,1478879141.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:42.227Z,1478879142.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:42.633Z,1478879142.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:43.002Z,1478879143.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:43.401Z,1478879143.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:43.887Z,1478879143.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:44.206Z,1478879144.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:44.622Z,1478879144.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:45.046Z,1478879145.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:45.402Z,1478879145.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:45.846Z,1478879145.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:46.207Z,1478879146.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:46.602Z,1478879146.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:47.017Z,1478879147.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:47.413Z,1478879147.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:47.802Z,1478879147.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:48.207Z,1478879148.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:48.611Z,1478879148.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:49.015Z,1478879149.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:49.409Z,1478879149.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:49.808Z,1478879149.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:50.209Z,1478879150.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:50.613Z,1478879150.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:51.013Z,1478879151.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:51.412Z,1478879151.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:51.821Z,1478879151.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:52.206Z,1478879152.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:52.586Z,1478879152.586 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T15:45:52.621Z,1478879152.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:52.986Z,1478879152.986 [PNI_TCM](ERROR): CRC does not match. Expected:0x16018 got:0x32500
2016-11-11T15:45:53.013Z,1478879153.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:53.420Z,1478879153.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:53.802Z,1478879153.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:54.200Z,1478879154.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:54.613Z,1478879154.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:55.021Z,1478879155.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:55.393Z,1478879155.393 [PNI_TCM](ERROR): CRC does not match. Expected:0x6581 got:0x49147
2016-11-11T15:45:55.421Z,1478879155.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:55.901Z,1478879155.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:56.214Z,1478879156.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:56.615Z,1478879156.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:57.045Z,1478879157.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:57.397Z,1478879157.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:57.846Z,1478879157.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:58.249Z,1478879158.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:58.591Z,1478879158.591 [PNI_TCM](ERROR): CRC does not match. Expected:0x15984 got:0x7490
2016-11-11T15:45:58.610Z,1478879158.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:59.022Z,1478879159.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:59.422Z,1478879159.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:45:59.866Z,1478879159.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:00.212Z,1478879160.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:00.612Z,1478879160.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:01.006Z,1478879161.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:01.406Z,1478879161.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:01.808Z,1478879161.808 [PNI_TCM](ERROR): CRC does not match. Expected:0x17775 got:0x16024
2016-11-11T15:46:01.873Z,1478879161.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:02.198Z,1478879162.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:02.605Z,1478879162.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:03.001Z,1478879163.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:03.409Z,1478879163.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:03.805Z,1478879163.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:04.209Z,1478879164.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:04.606Z,1478879164.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:04.627Z,1478879164.627 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T15:46:05.002Z,1478879165.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:05.402Z,1478879165.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:05.808Z,1478879165.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:06.198Z,1478879166.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:06.616Z,1478879166.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:06.994Z,1478879166.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:07.397Z,1478879167.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:07.794Z,1478879167.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:08.221Z,1478879168.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:08.599Z,1478879168.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:09.002Z,1478879169.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:09.410Z,1478879169.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:09.861Z,1478879169.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:10.229Z,1478879170.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:10.608Z,1478879170.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:11.015Z,1478879171.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:14.496Z,1478879174.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:14.614Z,1478879174.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:14.992Z,1478879174.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:15.388Z,1478879175.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:15.844Z,1478879175.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:16.207Z,1478879176.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:16.574Z,1478879176.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:17.013Z,1478879177.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:17.406Z,1478879177.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:17.779Z,1478879177.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:18.184Z,1478879178.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:18.579Z,1478879178.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:18.987Z,1478879178.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:19.389Z,1478879179.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:19.785Z,1478879179.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:20.187Z,1478879180.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:20.586Z,1478879180.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:20.000Z,1478879181.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:21.377Z,1478879181.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:21.772Z,1478879181.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:22.185Z,1478879182.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:22.584Z,1478879182.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:22.982Z,1478879182.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:23.378Z,1478879183.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:23.839Z,1478879183.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:24.186Z,1478879184.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:24.585Z,1478879184.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:24.993Z,1478879184.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:25.387Z,1478879185.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:25.853Z,1478879185.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:26.197Z,1478879186.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:26.576Z,1478879186.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:26.985Z,1478879186.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:27.379Z,1478879187.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:27.885Z,1478879187.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:28.192Z,1478879188.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:28.594Z,1478879188.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:28.989Z,1478879188.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:29.417Z,1478879189.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:29.845Z,1478879189.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:30.213Z,1478879190.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:30.575Z,1478879190.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:31.029Z,1478879191.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:31.407Z,1478879191.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:31.779Z,1478879191.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:32.186Z,1478879192.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:32.579Z,1478879192.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:32.978Z,1478879192.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:33.379Z,1478879193.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:33.779Z,1478879193.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:34.178Z,1478879194.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:34.590Z,1478879194.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:34.983Z,1478879194.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:35.388Z,1478879195.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:35.790Z,1478879195.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:36.182Z,1478879196.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:36.588Z,1478879196.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:37.001Z,1478879197.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:37.391Z,1478879197.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:37.840Z,1478879197.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:38.181Z,1478879198.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:38.582Z,1478879198.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:38.980Z,1478879198.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:39.385Z,1478879199.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:39.844Z,1478879199.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:40.189Z,1478879200.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:40.591Z,1478879200.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:40.986Z,1478879200.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:41.389Z,1478879201.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:41.836Z,1478879201.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:42.218Z,1478879202.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:42.591Z,1478879202.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:42.990Z,1478879202.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:43.384Z,1478879203.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:43.873Z,1478879203.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:44.177Z,1478879204.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:44.609Z,1478879204.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:44.977Z,1478879204.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:45.410Z,1478879205.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:45.810Z,1478879205.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:46.181Z,1478879206.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:46.581Z,1478879206.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:46.978Z,1478879206.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:47.385Z,1478879207.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:47.779Z,1478879207.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:48.212Z,1478879208.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:48.581Z,1478879208.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:49.010Z,1478879209.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:49.380Z,1478879209.380 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:49.380Z,1478879209.380 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 199
2016-11-11T15:46:49.380Z,1478879209.381 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:46:49.387Z,1478879209.387 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:49.387Z,1478879209.387 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 199
2016-11-11T15:46:49.387Z,1478879209.387 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:46:49.389Z,1478879209.389 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:49.390Z,1478879209.390 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 199
2016-11-11T15:46:49.390Z,1478879209.390 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:46:49.404Z,1478879209.404 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:46:49.404Z,1478879209.404 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:46:49.405Z,1478879209.405 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:46:49.807Z,1478879209.807 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:46:49.807Z,1478879209.807 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 199
2016-11-11T15:46:49.808Z,1478879209.808 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:46:49.808Z,1478879209.808 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 199
2016-11-11T15:46:49.808Z,1478879209.808 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:46:49.808Z,1478879209.808 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 199
2016-11-11T15:46:50.225Z,1478879210.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:46:50.225Z,1478879210.225 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:46:50.226Z,1478879210.226 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:46:50.252Z,1478879210.251 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:46:50.252Z,1478879210.252 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:46:50.252Z,1478879210.252 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:46:50.253Z,1478879210.253 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:46:50.253Z,1478879210.253 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:46:50.254Z,1478879210.253 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:46:50.593Z,1478879210.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:50.985Z,1478879210.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:51.385Z,1478879211.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:51.816Z,1478879211.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:52.189Z,1478879212.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:52.581Z,1478879212.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:52.993Z,1478879212.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:53.385Z,1478879213.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:53.804Z,1478879213.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:54.189Z,1478879214.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:54.595Z,1478879214.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:54.990Z,1478879214.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:55.386Z,1478879215.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:55.846Z,1478879215.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:56.194Z,1478879216.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:56.605Z,1478879216.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:56.977Z,1478879216.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:57.380Z,1478879217.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:57.845Z,1478879217.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:58.189Z,1478879218.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:58.606Z,1478879218.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:58.986Z,1478879218.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:59.406Z,1478879219.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:46:59.842Z,1478879219.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:00.196Z,1478879220.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:00.575Z,1478879220.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:00.985Z,1478879220.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:01.380Z,1478879221.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:01.779Z,1478879221.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:02.236Z,1478879222.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:02.587Z,1478879222.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:02.985Z,1478879222.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:03.385Z,1478879223.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:03.780Z,1478879223.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:04.248Z,1478879224.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:04.592Z,1478879224.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:04.992Z,1478879224.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:05.391Z,1478879225.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:05.813Z,1478879225.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:06.204Z,1478879226.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:06.585Z,1478879226.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:06.982Z,1478879226.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:07.384Z,1478879227.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:07.820Z,1478879227.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:08.193Z,1478879228.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:08.592Z,1478879228.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:09.001Z,1478879229.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:09.393Z,1478879229.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:09.811Z,1478879229.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:10.190Z,1478879230.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:10.617Z,1478879230.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:10.976Z,1478879230.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:11.376Z,1478879231.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:18.854Z,1478879238.854 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:47:18.854Z,1478879238.854 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:47:18.854Z,1478879238.854 [BPC1](ERROR): Communications Fault
2016-11-11T15:47:18.879Z,1478879238.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:18.969Z,1478879238.969 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:47:19.070Z,1478879239.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:19.437Z,1478879239.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:19.837Z,1478879239.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:19.910Z,1478879239.909 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:47:19.910Z,1478879239.910 [BPC1] No Fault, FailCount= 1
2016-11-11T15:47:20.330Z,1478879240.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:20.645Z,1478879240.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:21.059Z,1478879241.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:21.416Z,1478879241.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:21.851Z,1478879241.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:22.229Z,1478879242.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:22.648Z,1478879242.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:23.023Z,1478879243.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:23.423Z,1478879243.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:23.851Z,1478879243.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:24.222Z,1478879244.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:24.637Z,1478879244.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:25.041Z,1478879245.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:25.424Z,1478879245.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:25.826Z,1478879245.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:26.257Z,1478879246.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:26.634Z,1478879246.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:27.041Z,1478879247.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:27.442Z,1478879247.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:27.882Z,1478879247.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:28.226Z,1478879248.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:28.626Z,1478879248.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:29.030Z,1478879249.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:29.437Z,1478879249.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:29.826Z,1478879249.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:30.243Z,1478879250.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:30.637Z,1478879250.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:31.032Z,1478879251.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:31.435Z,1478879251.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:31.850Z,1478879251.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:32.246Z,1478879252.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:32.662Z,1478879252.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:33.022Z,1478879253.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:33.475Z,1478879253.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:33.850Z,1478879253.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:34.229Z,1478879254.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:34.659Z,1478879254.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:35.061Z,1478879255.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:35.433Z,1478879255.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:35.828Z,1478879255.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:36.222Z,1478879256.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:36.628Z,1478879256.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:37.048Z,1478879257.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:37.432Z,1478879257.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:37.899Z,1478879257.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:38.225Z,1478879258.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:38.632Z,1478879258.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:39.039Z,1478879259.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:39.442Z,1478879259.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:39.854Z,1478879259.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:40.259Z,1478879260.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:40.638Z,1478879260.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:41.069Z,1478879261.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:41.447Z,1478879261.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:41.887Z,1478879261.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:42.233Z,1478879262.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:42.637Z,1478879262.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:43.072Z,1478879263.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:43.441Z,1478879263.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:43.842Z,1478879263.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:44.230Z,1478879264.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:44.660Z,1478879264.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:45.094Z,1478879265.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:45.442Z,1478879265.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:45.840Z,1478879265.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:46.255Z,1478879266.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:46.670Z,1478879266.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:47.097Z,1478879267.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:47.436Z,1478879267.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:47.963Z,1478879267.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:48.270Z,1478879268.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:48.638Z,1478879268.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:49.054Z,1478879269.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:49.480Z,1478879269.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:49.850Z,1478879269.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:50.259Z,1478879270.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:50.638Z,1478879270.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:51.038Z,1478879271.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:51.438Z,1478879271.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:51.840Z,1478879271.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:52.238Z,1478879272.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:52.642Z,1478879272.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:53.060Z,1478879273.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:53.437Z,1478879273.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:53.870Z,1478879273.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:54.233Z,1478879274.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:54.667Z,1478879274.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:55.029Z,1478879275.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:55.433Z,1478879275.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:55.855Z,1478879275.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:56.228Z,1478879276.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:56.635Z,1478879276.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:57.037Z,1478879277.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:57.419Z,1478879277.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:57.825Z,1478879277.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:58.219Z,1478879278.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:58.624Z,1478879278.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:59.024Z,1478879279.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:59.429Z,1478879279.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:47:59.825Z,1478879279.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:00.233Z,1478879280.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:00.633Z,1478879280.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:01.033Z,1478879281.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:01.475Z,1478879281.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:01.836Z,1478879281.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:02.285Z,1478879282.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:02.635Z,1478879282.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:03.046Z,1478879283.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:03.466Z,1478879283.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:03.832Z,1478879283.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:04.221Z,1478879284.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:04.623Z,1478879284.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:05.029Z,1478879285.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:05.429Z,1478879285.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:05.837Z,1478879285.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:06.226Z,1478879286.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:06.625Z,1478879286.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:07.025Z,1478879287.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:07.425Z,1478879287.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:07.833Z,1478879287.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:08.226Z,1478879288.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:08.625Z,1478879288.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:09.025Z,1478879289.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:09.426Z,1478879289.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:09.839Z,1478879289.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:10.235Z,1478879290.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:10.243Z,1478879290.243 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T15:48:10.243Z,1478879290.243 [Default:CheckIn:C.Wait] Stopped
2016-11-11T15:48:10.243Z,1478879290.243 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T15:48:10.243Z,1478879290.243 [Default:CheckIn:D] Running Loop=1
2016-11-11T15:48:10.632Z,1478879290.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:10.641Z,1478879290.641 [Default:CheckIn:D] Stopped
2016-11-11T15:48:10.641Z,1478879290.641 [Default:CheckIn:E] Running Loop=1
2016-11-11T15:48:11.037Z,1478879291.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:11.046Z,1478879291.046 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 658.155534 min 
2016-11-11T15:48:11.046Z,1478879291.046 [Default:CheckIn:E] Stopped
2016-11-11T15:48:11.046Z,1478879291.046 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T15:48:11.046Z,1478879291.046 [Default:CheckIn] Stopped
2016-11-11T15:48:11.047Z,1478879291.047 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T15:48:11.047Z,1478879291.047 [Default:CheckIn](INFO): Running loop #64
2016-11-11T15:48:11.049Z,1478879291.049 [Default:CheckIn] Running Loop=64
2016-11-11T15:48:11.049Z,1478879291.049 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T15:48:11.049Z,1478879291.049 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T15:48:11.441Z,1478879291.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:14.913Z,1478879294.913 [NAL9602](INFO): Powering up
2016-11-11T15:48:14.956Z,1478879294.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:15.109Z,1478879295.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:15.553Z,1478879295.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:15.879Z,1478879295.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:16.281Z,1478879296.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:16.656Z,1478879296.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:17.074Z,1478879297.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:17.489Z,1478879297.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:17.863Z,1478879297.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:18.263Z,1478879298.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:18.664Z,1478879298.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:19.049Z,1478879299.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:19.457Z,1478879299.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:19.862Z,1478879299.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:20.289Z,1478879300.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:20.656Z,1478879300.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:21.051Z,1478879301.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:21.459Z,1478879301.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:21.851Z,1478879301.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:22.253Z,1478879302.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:22.656Z,1478879302.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:23.050Z,1478879303.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:23.450Z,1478879303.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:23.855Z,1478879303.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:24.255Z,1478879304.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:24.644Z,1478879304.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:25.055Z,1478879305.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:25.469Z,1478879305.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:25.817Z,1478879305.817 [NAL9602](INFO): NAL9602 initialized
2016-11-11T15:48:25.851Z,1478879305.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:26.259Z,1478879306.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:26.658Z,1478879306.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:27.072Z,1478879307.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:27.482Z,1478879307.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:27.865Z,1478879307.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:28.264Z,1478879308.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:28.661Z,1478879308.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:29.089Z,1478879309.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:29.502Z,1478879309.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:29.870Z,1478879309.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:30.265Z,1478879310.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:30.677Z,1478879310.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:31.070Z,1478879311.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:31.501Z,1478879311.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:31.879Z,1478879311.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:32.265Z,1478879312.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:32.673Z,1478879312.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:33.073Z,1478879313.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:33.466Z,1478879313.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:33.878Z,1478879313.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:34.277Z,1478879314.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:34.677Z,1478879314.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:35.097Z,1478879315.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:35.452Z,1478879315.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:35.862Z,1478879315.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:36.272Z,1478879316.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:36.701Z,1478879316.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:37.061Z,1478879317.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:37.465Z,1478879317.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:37.873Z,1478879317.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:38.274Z,1478879318.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:38.674Z,1478879318.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:39.077Z,1478879319.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:39.479Z,1478879319.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:39.879Z,1478879319.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:40.257Z,1478879320.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:40.655Z,1478879320.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:41.058Z,1478879321.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:41.457Z,1478879321.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:41.857Z,1478879321.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:42.254Z,1478879322.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:42.655Z,1478879322.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:43.065Z,1478879323.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:43.461Z,1478879323.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:43.853Z,1478879323.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:44.326Z,1478879324.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:44.674Z,1478879324.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:45.109Z,1478879325.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:45.477Z,1478879325.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:45.914Z,1478879325.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:46.285Z,1478879326.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:46.673Z,1478879326.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:47.052Z,1478879327.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:47.456Z,1478879327.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:47.907Z,1478879327.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:48.269Z,1478879328.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:48.656Z,1478879328.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:49.067Z,1478879329.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:49.497Z,1478879329.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:49.869Z,1478879329.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:50.275Z,1478879330.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:50.681Z,1478879330.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:51.064Z,1478879331.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:51.498Z,1478879331.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:51.865Z,1478879331.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:52.263Z,1478879332.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:52.673Z,1478879332.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:53.086Z,1478879333.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:53.469Z,1478879333.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:53.855Z,1478879333.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:54.259Z,1478879334.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:54.665Z,1478879334.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:55.085Z,1478879335.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:55.477Z,1478879335.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:55.864Z,1478879335.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:56.255Z,1478879336.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:56.661Z,1478879336.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:57.058Z,1478879337.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:57.465Z,1478879337.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:57.880Z,1478879337.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:58.255Z,1478879338.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:58.715Z,1478879338.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:59.057Z,1478879339.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:59.494Z,1478879339.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:48:59.877Z,1478879339.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:00.305Z,1478879340.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:00.705Z,1478879340.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:01.073Z,1478879341.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:01.467Z,1478879341.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:01.855Z,1478879341.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:02.252Z,1478879342.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:02.665Z,1478879342.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:03.053Z,1478879343.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:03.455Z,1478879343.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:03.870Z,1478879343.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:04.297Z,1478879344.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:04.663Z,1478879344.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:05.076Z,1478879345.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:05.466Z,1478879345.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:05.882Z,1478879345.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:06.277Z,1478879346.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:06.665Z,1478879346.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:07.071Z,1478879347.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:07.445Z,1478879347.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:07.880Z,1478879347.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:08.302Z,1478879348.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:08.658Z,1478879348.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:09.072Z,1478879349.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:09.481Z,1478879349.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:09.888Z,1478879349.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:10.288Z,1478879350.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:10.688Z,1478879350.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:11.085Z,1478879351.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:11.465Z,1478879351.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:14.869Z,1478879354.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:15.005Z,1478879355.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:15.411Z,1478879355.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:15.788Z,1478879355.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:16.226Z,1478879356.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:16.625Z,1478879356.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:16.995Z,1478879356.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:17.397Z,1478879357.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:17.785Z,1478879357.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:18.184Z,1478879358.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:18.593Z,1478879358.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:18.998Z,1478879358.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:19.368Z,1478879359.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:19.773Z,1478879359.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:20.181Z,1478879360.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:20.575Z,1478879360.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:20.981Z,1478879360.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:21.385Z,1478879361.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:21.783Z,1478879361.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:22.191Z,1478879362.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:22.589Z,1478879362.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:22.980Z,1478879362.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:23.382Z,1478879363.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:23.785Z,1478879363.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:24.193Z,1478879364.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:24.568Z,1478879364.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:24.993Z,1478879364.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:25.377Z,1478879365.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:25.789Z,1478879365.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:26.188Z,1478879366.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:26.597Z,1478879366.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:26.992Z,1478879366.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:27.403Z,1478879367.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:27.793Z,1478879367.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:28.205Z,1478879368.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:28.616Z,1478879368.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:28.973Z,1478879368.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:29.402Z,1478879369.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:29.801Z,1478879369.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:30.207Z,1478879370.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:30.574Z,1478879370.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:31.017Z,1478879371.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:31.375Z,1478879371.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:31.791Z,1478879371.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:32.189Z,1478879372.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:32.591Z,1478879372.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:32.000Z,1478879373.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:33.378Z,1478879373.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:33.787Z,1478879373.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:34.185Z,1478879374.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:34.589Z,1478879374.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:34.989Z,1478879374.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:35.388Z,1478879375.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:35.788Z,1478879375.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:36.189Z,1478879376.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:36.588Z,1478879376.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:36.996Z,1478879376.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:37.397Z,1478879377.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:37.811Z,1478879377.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:38.185Z,1478879378.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:38.577Z,1478879378.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:38.984Z,1478879378.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:39.385Z,1478879379.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:39.797Z,1478879379.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:40.189Z,1478879380.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:40.585Z,1478879380.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:40.973Z,1478879380.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:41.377Z,1478879381.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:41.785Z,1478879381.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:42.194Z,1478879382.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:42.627Z,1478879382.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:43.025Z,1478879383.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:43.382Z,1478879383.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:43.801Z,1478879383.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:44.188Z,1478879384.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:44.611Z,1478879384.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:44.972Z,1478879384.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:45.419Z,1478879385.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:45.781Z,1478879385.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:46.184Z,1478879386.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:46.576Z,1478879386.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:46.997Z,1478879386.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:47.386Z,1478879387.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:47.789Z,1478879387.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:48.185Z,1478879388.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:48.584Z,1478879388.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:48.981Z,1478879388.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:49.389Z,1478879389.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:49.788Z,1478879389.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:50.189Z,1478879390.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:50.597Z,1478879390.597 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:50.598Z,1478879390.598 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 200
2016-11-11T15:49:50.598Z,1478879390.598 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:49:50.608Z,1478879390.608 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:50.608Z,1478879390.608 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 200
2016-11-11T15:49:50.608Z,1478879390.608 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:49:50.610Z,1478879390.610 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:50.610Z,1478879390.610 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 200
2016-11-11T15:49:50.610Z,1478879390.611 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:49:50.692Z,1478879390.692 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:49:50.693Z,1478879390.693 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:49:50.693Z,1478879390.693 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:49:51.015Z,1478879391.015 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:49:51.015Z,1478879391.016 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 200
2016-11-11T15:49:51.016Z,1478879391.016 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:49:51.016Z,1478879391.016 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 200
2016-11-11T15:49:51.017Z,1478879391.017 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:49:51.017Z,1478879391.017 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 200
2016-11-11T15:49:51.399Z,1478879391.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:49:51.399Z,1478879391.399 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:49:51.400Z,1478879391.400 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:49:51.405Z,1478879391.405 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:49:51.405Z,1478879391.405 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:49:51.405Z,1478879391.405 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:49:51.406Z,1478879391.406 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:49:51.406Z,1478879391.406 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:49:51.407Z,1478879391.407 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:49:51.796Z,1478879391.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:52.174Z,1478879392.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:52.581Z,1478879392.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:52.979Z,1478879392.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:53.383Z,1478879393.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:53.786Z,1478879393.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:54.193Z,1478879394.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:54.593Z,1478879394.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:54.973Z,1478879394.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:55.373Z,1478879395.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:55.804Z,1478879395.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:56.190Z,1478879396.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:56.597Z,1478879396.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:56.998Z,1478879396.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:57.493Z,1478879397.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:57.794Z,1478879397.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:58.215Z,1478879398.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:58.579Z,1478879398.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:59.024Z,1478879399.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:59.443Z,1478879399.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:49:59.791Z,1478879399.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:00.197Z,1478879400.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:00.584Z,1478879400.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:01.007Z,1478879401.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:01.401Z,1478879401.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:01.807Z,1478879401.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:02.206Z,1478879402.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:02.575Z,1478879402.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:02.977Z,1478879402.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:03.381Z,1478879403.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:03.780Z,1478879403.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:04.177Z,1478879404.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:04.581Z,1478879404.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:04.987Z,1478879404.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:05.390Z,1478879405.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:05.778Z,1478879405.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:06.195Z,1478879406.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:06.590Z,1478879406.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:07.007Z,1478879407.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:07.453Z,1478879407.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:07.791Z,1478879407.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:08.195Z,1478879408.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:08.577Z,1478879408.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:08.977Z,1478879408.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:09.384Z,1478879409.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:09.782Z,1478879409.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:10.184Z,1478879410.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:10.591Z,1478879410.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:10.973Z,1478879410.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:11.521Z,1478879411.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:11.802Z,1478879411.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:15.256Z,1478879415.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:15.409Z,1478879415.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:15.758Z,1478879415.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:16.153Z,1478879416.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:16.546Z,1478879416.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:16.946Z,1478879416.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:17.347Z,1478879417.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:17.747Z,1478879417.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:18.120Z,1478879418.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:18.527Z,1478879418.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:18.937Z,1478879418.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:19.337Z,1478879419.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:19.728Z,1478879419.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:20.127Z,1478879420.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:20.536Z,1478879420.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:20.940Z,1478879420.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:21.330Z,1478879421.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:21.750Z,1478879421.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:22.142Z,1478879422.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:22.541Z,1478879422.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:22.952Z,1478879422.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:23.329Z,1478879423.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:23.738Z,1478879423.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:24.129Z,1478879424.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:24.540Z,1478879424.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:24.936Z,1478879424.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:25.330Z,1478879425.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:25.741Z,1478879425.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:26.149Z,1478879426.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:26.551Z,1478879426.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:26.943Z,1478879426.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:27.337Z,1478879427.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:27.740Z,1478879427.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:28.172Z,1478879428.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:28.562Z,1478879428.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:28.950Z,1478879428.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:29.370Z,1478879429.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:29.731Z,1478879429.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:30.161Z,1478879430.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:30.559Z,1478879430.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:30.924Z,1478879430.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:31.333Z,1478879431.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:31.733Z,1478879431.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:32.128Z,1478879432.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:32.536Z,1478879432.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:32.933Z,1478879432.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:33.330Z,1478879433.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:33.738Z,1478879433.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:34.144Z,1478879434.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:34.530Z,1478879434.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:34.944Z,1478879434.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:35.340Z,1478879435.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:35.728Z,1478879435.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:36.133Z,1478879436.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:36.529Z,1478879436.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:36.946Z,1478879436.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:37.335Z,1478879437.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:37.725Z,1478879437.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:38.151Z,1478879438.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:38.554Z,1478879438.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:38.942Z,1478879438.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:39.333Z,1478879439.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:39.741Z,1478879439.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:40.143Z,1478879440.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:40.541Z,1478879440.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:40.936Z,1478879440.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:41.361Z,1478879441.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:41.729Z,1478879441.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:42.151Z,1478879442.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:42.570Z,1478879442.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:42.928Z,1478879442.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:43.336Z,1478879443.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:43.730Z,1478879443.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:44.147Z,1478879444.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:44.533Z,1478879444.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:44.933Z,1478879444.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:45.332Z,1478879445.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:45.736Z,1478879445.736 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:50:45.736Z,1478879445.736 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:50:45.736Z,1478879445.736 [BPC1](ERROR): Communications Fault
2016-11-11T15:50:45.749Z,1478879445.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:45.790Z,1478879445.790 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:50:46.149Z,1478879446.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:46.532Z,1478879446.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:46.945Z,1478879446.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:46.990Z,1478879446.990 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:50:46.990Z,1478879446.990 [BPC1] No Fault, FailCount= 1
2016-11-11T15:50:47.386Z,1478879447.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:47.752Z,1478879447.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:48.137Z,1478879448.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:48.543Z,1478879448.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:48.942Z,1478879448.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:49.370Z,1478879449.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:49.746Z,1478879449.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:50.155Z,1478879450.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:50.548Z,1478879450.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:50.962Z,1478879450.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:51.362Z,1478879451.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:51.732Z,1478879451.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:52.149Z,1478879452.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:52.534Z,1478879452.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:52.932Z,1478879452.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:53.390Z,1478879453.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:53.737Z,1478879453.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:54.136Z,1478879454.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:54.541Z,1478879454.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:54.914Z,1478879454.914 [PNI_TCM](ERROR): CRC does not match. Expected:0x9369 got:0x1857
2016-11-11T15:50:54.958Z,1478879454.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:55.382Z,1478879455.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:55.744Z,1478879455.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:56.127Z,1478879456.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:56.529Z,1478879456.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:56.945Z,1478879456.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:57.324Z,1478879457.324 [PNI_TCM](ERROR): CRC does not match. Expected:0x1341 got:0x39963
2016-11-11T15:50:57.345Z,1478879457.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:57.731Z,1478879457.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:58.142Z,1478879458.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:58.545Z,1478879458.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:58.929Z,1478879458.929 [PNI_TCM](ERROR): CRC does not match. Expected:0x47310 got:0x24694
2016-11-11T15:50:58.957Z,1478879458.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:59.346Z,1478879459.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:50:59.742Z,1478879459.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:00.130Z,1478879460.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:00.529Z,1478879460.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:00.938Z,1478879460.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:01.365Z,1478879461.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:01.734Z,1478879461.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:02.140Z,1478879462.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:02.538Z,1478879462.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:02.942Z,1478879462.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:03.410Z,1478879463.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:03.734Z,1478879463.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:04.161Z,1478879464.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:04.569Z,1478879464.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:04.926Z,1478879464.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:05.390Z,1478879465.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:05.732Z,1478879465.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:06.141Z,1478879466.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:06.533Z,1478879466.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:06.931Z,1478879466.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:07.396Z,1478879467.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:07.741Z,1478879467.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:08.130Z,1478879468.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:08.526Z,1478879468.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:08.929Z,1478879468.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:09.290Z,1478879469.290 [NAL9602](INFO): SBD MO Status=2, MOMSN=349, MT Status=2, MTMSN=0
2016-11-11T15:51:09.290Z,1478879469.290 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T15:51:09.406Z,1478879469.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:09.746Z,1478879469.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:10.145Z,1478879470.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:10.540Z,1478879470.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:10.940Z,1478879470.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:11.341Z,1478879471.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:11.729Z,1478879471.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:12.124Z,1478879472.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:15.726Z,1478879475.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:15.929Z,1478879475.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:16.341Z,1478879476.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:16.708Z,1478879476.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:17.135Z,1478879477.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:17.503Z,1478879477.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:17.931Z,1478879477.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:18.355Z,1478879478.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:18.700Z,1478879478.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:19.112Z,1478879479.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:19.507Z,1478879479.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:19.924Z,1478879479.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:20.315Z,1478879480.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:20.713Z,1478879480.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:21.108Z,1478879481.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:21.505Z,1478879481.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:21.903Z,1478879481.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:22.297Z,1478879482.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:22.693Z,1478879482.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:23.101Z,1478879483.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:23.502Z,1478879483.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:23.897Z,1478879483.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:24.303Z,1478879484.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:24.715Z,1478879484.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:25.113Z,1478879485.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:25.524Z,1478879485.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:25.904Z,1478879485.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:26.306Z,1478879486.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:26.705Z,1478879486.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:27.105Z,1478879487.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:27.509Z,1478879487.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:27.904Z,1478879487.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:28.304Z,1478879488.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:28.706Z,1478879488.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:29.117Z,1478879489.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:29.525Z,1478879489.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:29.889Z,1478879489.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:30.315Z,1478879490.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:30.701Z,1478879490.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:31.153Z,1478879491.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:31.515Z,1478879491.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:31.921Z,1478879491.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:32.318Z,1478879492.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:32.708Z,1478879492.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:33.109Z,1478879493.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:33.513Z,1478879493.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:33.909Z,1478879493.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:34.312Z,1478879494.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:34.713Z,1478879494.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:35.133Z,1478879495.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:35.509Z,1478879495.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:35.913Z,1478879495.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:36.313Z,1478879496.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:36.733Z,1478879496.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:37.100Z,1478879497.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:37.495Z,1478879497.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:37.905Z,1478879497.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:38.293Z,1478879498.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:38.700Z,1478879498.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:39.100Z,1478879499.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:39.496Z,1478879499.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:39.900Z,1478879499.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:40.301Z,1478879500.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:40.696Z,1478879500.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:41.094Z,1478879501.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:41.501Z,1478879501.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:41.901Z,1478879501.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:42.301Z,1478879502.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:42.700Z,1478879502.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:43.105Z,1478879503.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:43.521Z,1478879503.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:43.909Z,1478879503.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:44.325Z,1478879504.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:44.697Z,1478879504.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:45.127Z,1478879505.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:45.497Z,1478879505.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:45.925Z,1478879505.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:46.254Z,1478879506.254 [NAL9602](INFO): SBD MO Status=2, MOMSN=349, MT Status=2, MTMSN=0
2016-11-11T15:51:46.254Z,1478879506.254 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T15:51:46.329Z,1478879506.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:46.707Z,1478879506.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:47.092Z,1478879507.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:47.496Z,1478879507.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:47.949Z,1478879507.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:48.309Z,1478879508.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:48.704Z,1478879508.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:49.105Z,1478879509.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:49.504Z,1478879509.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:49.905Z,1478879509.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:50.306Z,1478879510.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:50.711Z,1478879510.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:51.117Z,1478879511.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:51.521Z,1478879511.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:51.937Z,1478879511.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:52.289Z,1478879512.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:52.724Z,1478879512.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:53.117Z,1478879513.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:53.533Z,1478879513.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:53.896Z,1478879513.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:54.301Z,1478879514.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:54.704Z,1478879514.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:55.097Z,1478879515.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:55.507Z,1478879515.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:55.903Z,1478879515.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:56.302Z,1478879516.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:56.701Z,1478879516.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:57.129Z,1478879517.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:57.506Z,1478879517.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:57.925Z,1478879517.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:58.304Z,1478879518.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:58.706Z,1478879518.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:59.146Z,1478879519.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:59.512Z,1478879519.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:51:59.950Z,1478879519.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:00.325Z,1478879520.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:00.690Z,1478879520.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:01.093Z,1478879521.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:01.484Z,1478879521.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:01.897Z,1478879521.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:02.292Z,1478879522.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:02.701Z,1478879522.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:03.091Z,1478879523.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:03.498Z,1478879523.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:03.902Z,1478879523.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:04.309Z,1478879524.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:04.753Z,1478879524.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:05.109Z,1478879525.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:05.497Z,1478879525.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:05.908Z,1478879525.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:06.304Z,1478879526.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:06.709Z,1478879526.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:07.109Z,1478879527.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:07.515Z,1478879527.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:07.925Z,1478879527.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:08.336Z,1478879528.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:08.747Z,1478879528.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:09.106Z,1478879529.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:09.542Z,1478879529.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:09.922Z,1478879529.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:10.361Z,1478879530.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:10.733Z,1478879530.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:11.150Z,1478879531.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:11.508Z,1478879531.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:11.916Z,1478879531.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:12.370Z,1478879532.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:17.981Z,1478879537.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:18.094Z,1478879538.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:18.545Z,1478879538.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:18.891Z,1478879538.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:19.366Z,1478879539.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:19.723Z,1478879539.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:20.122Z,1478879540.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:20.489Z,1478879540.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:20.912Z,1478879540.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:21.372Z,1478879541.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:21.693Z,1478879541.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:22.109Z,1478879542.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:22.497Z,1478879542.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:22.886Z,1478879542.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:23.298Z,1478879543.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:23.724Z,1478879543.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:24.087Z,1478879544.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:24.446Z,1478879544.446 [NAL9602](INFO): SBD MO Status=2, MOMSN=349, MT Status=2, MTMSN=0
2016-11-11T15:52:24.446Z,1478879544.446 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T15:52:24.522Z,1478879544.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:24.934Z,1478879544.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:25.344Z,1478879545.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:25.752Z,1478879545.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:26.097Z,1478879546.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:26.494Z,1478879546.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:26.917Z,1478879546.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:27.305Z,1478879547.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:27.702Z,1478879547.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:28.103Z,1478879548.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:28.505Z,1478879548.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:28.920Z,1478879548.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:29.361Z,1478879549.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:29.701Z,1478879549.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:30.097Z,1478879550.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:30.515Z,1478879550.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:30.901Z,1478879550.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:31.320Z,1478879551.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:31.694Z,1478879551.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:32.160Z,1478879552.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:32.506Z,1478879552.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:32.918Z,1478879552.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:33.313Z,1478879553.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:33.726Z,1478879553.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:34.130Z,1478879554.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:34.502Z,1478879554.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:34.889Z,1478879554.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:35.369Z,1478879555.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:35.714Z,1478879555.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:36.128Z,1478879556.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:36.498Z,1478879556.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:36.913Z,1478879556.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:37.292Z,1478879557.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:37.757Z,1478879557.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:38.117Z,1478879558.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:38.481Z,1478879558.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:38.889Z,1478879558.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:39.281Z,1478879559.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:39.736Z,1478879559.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:40.083Z,1478879560.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:40.481Z,1478879560.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:40.892Z,1478879560.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:41.276Z,1478879561.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:41.685Z,1478879561.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:42.085Z,1478879562.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:42.543Z,1478879562.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:42.877Z,1478879562.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:43.281Z,1478879563.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:43.681Z,1478879563.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:44.080Z,1478879564.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:44.481Z,1478879564.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:44.885Z,1478879564.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:45.294Z,1478879565.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:45.685Z,1478879565.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:46.105Z,1478879566.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:46.481Z,1478879566.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:46.950Z,1478879566.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:47.285Z,1478879567.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:47.706Z,1478879567.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:48.109Z,1478879568.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:48.485Z,1478879568.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:48.881Z,1478879568.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:49.292Z,1478879569.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:49.676Z,1478879569.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:50.080Z,1478879570.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:50.481Z,1478879570.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:50.885Z,1478879570.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:51.363Z,1478879571.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:51.686Z,1478879571.686 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:51.686Z,1478879571.686 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 201
2016-11-11T15:52:51.686Z,1478879571.686 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:52:51.693Z,1478879571.693 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:51.693Z,1478879571.693 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 201
2016-11-11T15:52:51.693Z,1478879571.693 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:52:51.695Z,1478879571.695 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:51.696Z,1478879571.696 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 201
2016-11-11T15:52:51.696Z,1478879571.696 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:52:51.710Z,1478879571.710 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:52:51.710Z,1478879571.710 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:52:51.710Z,1478879571.710 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:52:52.102Z,1478879572.102 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:52:52.102Z,1478879572.102 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 201
2016-11-11T15:52:52.102Z,1478879572.102 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:52:52.103Z,1478879572.103 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 201
2016-11-11T15:52:52.103Z,1478879572.103 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:52:52.104Z,1478879572.103 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 201
2016-11-11T15:52:52.479Z,1478879572.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:52:52.479Z,1478879572.480 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:52:52.480Z,1478879572.480 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:52:52.484Z,1478879572.484 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:52:52.485Z,1478879572.485 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:52:52.485Z,1478879572.485 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:52:52.486Z,1478879572.486 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:52:52.486Z,1478879572.486 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:52:52.486Z,1478879572.486 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:52:52.882Z,1478879572.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:53.285Z,1478879573.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:53.652Z,1478879573.652 [NAL9602](INFO): SBD MO Status=0, MOMSN=349, MT Status=0, MTMSN=0
2016-11-11T15:52:53.652Z,1478879573.652 [NAL9602](INFO): No messages in MT queue
2016-11-11T15:52:53.687Z,1478879573.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:54.081Z,1478879574.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:54.449Z,1478879574.449 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T15:52:54.449Z,1478879574.449 [NAL9602] Data Fault, FailCount= 1
2016-11-11T15:52:54.449Z,1478879574.449 [NAL9602](ERROR): Data Fault
2016-11-11T15:52:54.489Z,1478879574.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:54.530Z,1478879574.530 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T15:52:54.844Z,1478879574.844 [NAL9602](INFO): Powering down
2016-11-11T15:52:54.881Z,1478879574.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:55.285Z,1478879575.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:55.681Z,1478879575.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:55.701Z,1478879575.701 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T15:52:55.701Z,1478879575.701 [NAL9602] No Fault, FailCount= 1
2016-11-11T15:52:56.085Z,1478879576.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:56.477Z,1478879576.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:56.885Z,1478879576.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:57.280Z,1478879577.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:57.685Z,1478879577.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:58.077Z,1478879578.077 [BPC1](ERROR): Failed to parse message.
2016-11-11T15:52:58.078Z,1478879578.078 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T15:52:58.078Z,1478879578.078 [BPC1] Data Fault, FailCount= 1
2016-11-11T15:52:58.078Z,1478879578.078 [BPC1](ERROR): Data Fault
2016-11-11T15:52:58.086Z,1478879578.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:58.106Z,1478879578.106 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T15:52:58.485Z,1478879578.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:58.880Z,1478879578.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:59.287Z,1478879579.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:52:59.307Z,1478879579.307 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:52:59.307Z,1478879579.307 [BPC1] No Fault, FailCount= 1
2016-11-11T15:52:59.733Z,1478879579.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:00.045Z,1478879580.045 [NAL9602](INFO): Powering up NAL9602
2016-11-11T15:53:00.109Z,1478879580.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:00.485Z,1478879580.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:00.893Z,1478879580.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:01.280Z,1478879581.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:01.797Z,1478879581.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:02.080Z,1478879582.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:02.485Z,1478879582.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:02.881Z,1478879582.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:03.293Z,1478879583.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:03.689Z,1478879583.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:04.098Z,1478879584.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:04.484Z,1478879584.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:04.889Z,1478879584.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:05.289Z,1478879585.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:05.696Z,1478879585.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:06.089Z,1478879586.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:06.489Z,1478879586.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:06.885Z,1478879586.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:07.277Z,1478879587.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:07.702Z,1478879587.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:08.085Z,1478879588.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:08.489Z,1478879588.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:08.889Z,1478879588.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:09.289Z,1478879589.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:09.701Z,1478879589.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:10.089Z,1478879590.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:10.529Z,1478879590.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:10.941Z,1478879590.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:11.245Z,1478879591.245 [NAL9602](INFO): NAL9602 initialized
2016-11-11T15:53:11.297Z,1478879591.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:11.306Z,1478879591.306 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T15:48:11.0Z
2016-11-11T15:53:11.306Z,1478879591.306 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T15:53:11.306Z,1478879591.306 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T15:53:11.697Z,1478879591.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:12.515Z,1478879592.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:12.641Z,1478879592.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:16.265Z,1478879596.265 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:53:16.265Z,1478879596.265 [BPC1] Communications Fault, FailCount= 2
2016-11-11T15:53:16.265Z,1478879596.265 [BPC1](ERROR): Communications Fault
2016-11-11T15:53:16.273Z,1478879596.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:16.331Z,1478879596.331 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:53:16.351Z,1478879596.351 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0256.lzma
2016-11-11T15:53:16.416Z,1478879596.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:16.793Z,1478879596.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:17.141Z,1478879597.141 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0256.lzma.bak
2016-11-11T15:53:17.141Z,1478879597.141 [DataOverHttps](INFO): SBD MOMSN=4555546
2016-11-11T15:53:17.268Z,1478879597.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:17.317Z,1478879597.317 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:53:17.317Z,1478879597.317 [BPC1] No Fault, FailCount= 2
2016-11-11T15:53:18.419Z,1478879598.419 [NAL9602](INFO): Powering down
2016-11-11T15:53:18.533Z,1478879598.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:18.689Z,1478879598.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:22.032Z,1478879602.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:22.158Z,1478879602.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:22.510Z,1478879602.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:22.903Z,1478879602.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:23.303Z,1478879603.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:23.709Z,1478879603.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:27.312Z,1478879607.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:27.374Z,1478879607.374 [DataOverHttps](INFO): Sending 164 bytes from file Logs/20161111T044527/Express0257.lzma
2016-11-11T15:53:27.451Z,1478879607.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:27.817Z,1478879607.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:28.165Z,1478879608.165 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0257.lzma.bak
2016-11-11T15:53:28.165Z,1478879608.165 [DataOverHttps](INFO): SBD MOMSN=4555548
2016-11-11T15:53:28.235Z,1478879608.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:29.590Z,1478879609.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:29.619Z,1478879609.619 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T15:53:29.619Z,1478879609.619 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T15:53:29.619Z,1478879609.619 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T15:53:29.717Z,1478879609.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:33.266Z,1478879613.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:33.381Z,1478879613.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:33.777Z,1478879613.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:34.157Z,1478879614.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:34.589Z,1478879614.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:34.978Z,1478879614.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:35.344Z,1478879615.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:35.742Z,1478879615.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:36.149Z,1478879616.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:36.544Z,1478879616.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:36.942Z,1478879616.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:37.345Z,1478879617.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:37.745Z,1478879617.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:38.144Z,1478879618.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:38.540Z,1478879618.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:38.944Z,1478879618.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:39.353Z,1478879619.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:39.743Z,1478879619.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:40.167Z,1478879620.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:40.544Z,1478879620.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:40.944Z,1478879620.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:41.340Z,1478879621.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:41.744Z,1478879621.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:42.145Z,1478879622.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:42.545Z,1478879622.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:42.945Z,1478879622.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:43.356Z,1478879623.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:43.772Z,1478879623.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:44.145Z,1478879624.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:44.544Z,1478879624.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:44.945Z,1478879624.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:45.344Z,1478879625.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:45.745Z,1478879625.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:46.137Z,1478879626.137 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T15:53:46.138Z,1478879626.138 [BPC1] Data Fault, FailCount= 1
2016-11-11T15:53:46.138Z,1478879626.138 [BPC1](ERROR): Data Fault
2016-11-11T15:53:46.146Z,1478879626.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:46.166Z,1478879626.166 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T15:53:46.545Z,1478879626.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:46.945Z,1478879626.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:47.345Z,1478879627.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:47.364Z,1478879627.364 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:53:47.364Z,1478879627.364 [BPC1] No Fault, FailCount= 1
2016-11-11T15:53:47.797Z,1478879627.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:48.162Z,1478879628.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:48.545Z,1478879628.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:48.972Z,1478879628.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:49.344Z,1478879629.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:49.766Z,1478879629.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:50.146Z,1478879630.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:50.545Z,1478879630.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:50.940Z,1478879630.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:51.345Z,1478879631.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:51.766Z,1478879631.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:52.144Z,1478879632.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:52.545Z,1478879632.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:52.940Z,1478879632.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:53.344Z,1478879633.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:53.746Z,1478879633.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:54.144Z,1478879634.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:54.540Z,1478879634.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:54.946Z,1478879634.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:55.392Z,1478879635.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:55.769Z,1478879635.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:56.152Z,1478879636.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:56.573Z,1478879636.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:56.973Z,1478879636.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:57.357Z,1478879637.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:57.753Z,1478879637.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:58.149Z,1478879638.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:58.553Z,1478879638.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:58.953Z,1478879638.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:59.373Z,1478879639.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:53:59.753Z,1478879639.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:00.154Z,1478879640.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:00.616Z,1478879640.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:00.957Z,1478879640.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:01.374Z,1478879641.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:01.759Z,1478879641.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:02.169Z,1478879642.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:02.573Z,1478879642.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:02.961Z,1478879642.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:03.352Z,1478879643.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:03.762Z,1478879643.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:04.145Z,1478879644.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:04.544Z,1478879644.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:04.943Z,1478879644.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:05.340Z,1478879645.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:05.748Z,1478879645.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:06.153Z,1478879646.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:06.547Z,1478879646.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:06.953Z,1478879646.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:07.363Z,1478879647.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:07.749Z,1478879647.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:08.157Z,1478879648.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:08.557Z,1478879648.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:08.957Z,1478879648.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:09.347Z,1478879649.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:09.747Z,1478879649.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:10.150Z,1478879650.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:10.547Z,1478879650.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:10.957Z,1478879650.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:11.357Z,1478879651.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:11.750Z,1478879651.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:12.153Z,1478879652.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:12.549Z,1478879652.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:12.958Z,1478879652.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:13.359Z,1478879653.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:13.761Z,1478879653.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:14.150Z,1478879654.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:14.578Z,1478879654.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:14.982Z,1478879654.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:15.360Z,1478879655.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:15.789Z,1478879655.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:16.150Z,1478879656.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:16.573Z,1478879656.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:16.982Z,1478879656.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:17.349Z,1478879657.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:17.772Z,1478879657.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:18.147Z,1478879658.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:18.553Z,1478879658.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:18.947Z,1478879658.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:19.373Z,1478879659.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:19.745Z,1478879659.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:20.145Z,1478879660.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:20.547Z,1478879660.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:20.950Z,1478879660.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:21.357Z,1478879661.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:21.755Z,1478879661.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:22.155Z,1478879662.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:22.542Z,1478879662.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:23.038Z,1478879663.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:23.347Z,1478879663.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:23.747Z,1478879663.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:24.154Z,1478879664.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:24.557Z,1478879664.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:24.949Z,1478879664.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:25.360Z,1478879665.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:25.753Z,1478879665.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:26.141Z,1478879666.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:26.548Z,1478879666.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:26.950Z,1478879666.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:27.355Z,1478879667.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:27.762Z,1478879667.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:28.156Z,1478879668.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:28.589Z,1478879668.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:28.989Z,1478879668.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:29.357Z,1478879669.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:29.750Z,1478879669.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:30.197Z,1478879670.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:33.757Z,1478879673.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:33.913Z,1478879673.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:34.261Z,1478879674.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:34.681Z,1478879674.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:35.082Z,1478879675.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:35.461Z,1478879675.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:35.845Z,1478879675.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:36.250Z,1478879676.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:36.643Z,1478879676.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:37.062Z,1478879677.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:37.450Z,1478879677.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:37.853Z,1478879677.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:38.255Z,1478879678.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:38.651Z,1478879678.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:39.072Z,1478879679.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:39.453Z,1478879679.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:39.849Z,1478879679.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:40.256Z,1478879680.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:40.652Z,1478879680.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:41.101Z,1478879681.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:41.444Z,1478879681.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:41.845Z,1478879681.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:42.240Z,1478879682.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:42.643Z,1478879682.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:43.049Z,1478879683.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:43.489Z,1478879683.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:43.853Z,1478879683.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:44.249Z,1478879684.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:44.646Z,1478879684.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:45.049Z,1478879685.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:45.505Z,1478879685.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:45.851Z,1478879685.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:46.297Z,1478879686.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:46.677Z,1478879686.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:47.061Z,1478879687.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:47.441Z,1478879687.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:47.870Z,1478879687.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:48.241Z,1478879688.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:48.669Z,1478879688.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:49.073Z,1478879689.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:49.449Z,1478879689.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:49.842Z,1478879689.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:50.249Z,1478879690.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:50.644Z,1478879690.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:51.057Z,1478879691.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:51.444Z,1478879691.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:51.844Z,1478879691.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:52.257Z,1478879692.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:52.647Z,1478879692.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:53.043Z,1478879693.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:53.453Z,1478879693.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:53.849Z,1478879693.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:54.244Z,1478879694.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:54.649Z,1478879694.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:55.112Z,1478879695.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:55.446Z,1478879695.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:55.853Z,1478879695.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:56.260Z,1478879696.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:56.661Z,1478879696.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:57.041Z,1478879697.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:57.518Z,1478879697.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:57.838Z,1478879697.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:58.239Z,1478879698.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:58.644Z,1478879698.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:59.044Z,1478879699.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:59.479Z,1478879699.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:54:59.853Z,1478879699.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:00.248Z,1478879700.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:00.653Z,1478879700.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:01.046Z,1478879701.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:01.497Z,1478879701.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:01.853Z,1478879701.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:02.270Z,1478879702.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:02.648Z,1478879702.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:03.052Z,1478879703.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:03.453Z,1478879703.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:03.851Z,1478879703.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:04.229Z,1478879704.229 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:55:04.229Z,1478879704.229 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:55:04.229Z,1478879704.229 [BPC1](ERROR): Communications Fault
2016-11-11T15:55:04.267Z,1478879704.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:04.311Z,1478879704.311 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:55:04.656Z,1478879704.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:05.052Z,1478879705.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:05.457Z,1478879705.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:05.477Z,1478879705.477 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:55:05.478Z,1478879705.478 [BPC1] No Fault, FailCount= 1
2016-11-11T15:55:05.895Z,1478879705.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:06.271Z,1478879706.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:06.662Z,1478879706.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:07.055Z,1478879707.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:07.461Z,1478879707.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:07.841Z,1478879707.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:08.241Z,1478879708.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:08.639Z,1478879708.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:09.103Z,1478879709.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:09.456Z,1478879709.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:09.852Z,1478879709.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:10.255Z,1478879710.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:10.656Z,1478879710.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:11.053Z,1478879711.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:11.472Z,1478879711.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:11.849Z,1478879711.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:12.243Z,1478879712.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:12.651Z,1478879712.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:13.045Z,1478879713.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:13.474Z,1478879713.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:13.856Z,1478879713.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:14.256Z,1478879714.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:14.653Z,1478879714.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:15.057Z,1478879715.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:15.441Z,1478879715.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:15.840Z,1478879715.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:16.244Z,1478879716.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:16.645Z,1478879716.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:17.085Z,1478879717.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:17.451Z,1478879717.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:17.849Z,1478879717.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:18.253Z,1478879718.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:18.686Z,1478879718.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:19.054Z,1478879719.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:19.485Z,1478879719.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:19.886Z,1478879719.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:20.249Z,1478879720.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:20.643Z,1478879720.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:21.052Z,1478879721.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:21.447Z,1478879721.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:21.846Z,1478879721.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:22.250Z,1478879722.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:22.654Z,1478879722.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:23.100Z,1478879723.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:23.457Z,1478879723.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:23.864Z,1478879723.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:24.257Z,1478879724.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:24.637Z,1478879724.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:25.041Z,1478879725.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:25.480Z,1478879725.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:25.844Z,1478879725.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:26.246Z,1478879726.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:26.644Z,1478879726.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:27.048Z,1478879727.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:27.468Z,1478879727.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:27.849Z,1478879727.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:28.257Z,1478879728.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:28.641Z,1478879728.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:29.037Z,1478879729.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:29.445Z,1478879729.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:29.846Z,1478879729.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:30.285Z,1478879730.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:33.714Z,1478879733.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:33.842Z,1478879733.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:34.235Z,1478879734.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:34.614Z,1478879734.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:35.049Z,1478879735.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:35.449Z,1478879735.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:35.821Z,1478879735.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:36.215Z,1478879736.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:36.621Z,1478879736.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:37.070Z,1478879737.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:37.418Z,1478879737.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:37.817Z,1478879737.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:38.226Z,1478879738.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:38.629Z,1478879738.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:39.023Z,1478879739.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:39.436Z,1478879739.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:39.825Z,1478879739.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:40.229Z,1478879740.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:40.625Z,1478879740.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:41.024Z,1478879741.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:41.452Z,1478879741.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:41.809Z,1478879741.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:42.212Z,1478879742.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:42.612Z,1478879742.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:43.019Z,1478879743.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:43.420Z,1478879743.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:43.819Z,1478879743.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:44.215Z,1478879744.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:44.620Z,1478879744.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:45.029Z,1478879745.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:45.426Z,1478879745.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:45.817Z,1478879745.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:46.277Z,1478879746.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:46.625Z,1478879746.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:47.024Z,1478879747.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:47.449Z,1478879747.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:47.834Z,1478879747.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:48.249Z,1478879748.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:48.623Z,1478879748.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:49.053Z,1478879749.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:49.444Z,1478879749.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:49.813Z,1478879749.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:50.216Z,1478879750.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:50.612Z,1478879750.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:51.038Z,1478879751.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:51.429Z,1478879751.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:51.818Z,1478879751.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:52.224Z,1478879752.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:52.623Z,1478879752.623 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:52.623Z,1478879752.624 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 202
2016-11-11T15:55:52.623Z,1478879752.624 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:55:52.630Z,1478879752.630 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:52.630Z,1478879752.630 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 202
2016-11-11T15:55:52.630Z,1478879752.630 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:55:52.632Z,1478879752.632 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:52.632Z,1478879752.632 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 202
2016-11-11T15:55:52.633Z,1478879752.633 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:55:52.671Z,1478879752.671 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:55:52.672Z,1478879752.672 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:55:52.672Z,1478879752.672 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:55:53.034Z,1478879753.034 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:55:53.034Z,1478879753.034 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 202
2016-11-11T15:55:53.035Z,1478879753.035 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:55:53.035Z,1478879753.035 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 202
2016-11-11T15:55:53.036Z,1478879753.036 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:55:53.036Z,1478879753.036 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 202
2016-11-11T15:55:53.431Z,1478879753.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:55:53.432Z,1478879753.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:55:53.432Z,1478879753.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:55:53.437Z,1478879753.437 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:55:53.437Z,1478879753.437 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:55:53.438Z,1478879753.438 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:55:53.438Z,1478879753.438 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:55:53.439Z,1478879753.439 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:55:53.439Z,1478879753.439 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:55:53.826Z,1478879753.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:54.228Z,1478879754.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:54.627Z,1478879754.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:55.026Z,1478879755.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:55.433Z,1478879755.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:55.817Z,1478879755.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:56.212Z,1478879756.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:56.621Z,1478879756.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:57.017Z,1478879757.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:57.416Z,1478879757.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:57.815Z,1478879757.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:58.221Z,1478879758.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:58.623Z,1478879758.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:59.029Z,1478879759.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:59.423Z,1478879759.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:55:59.825Z,1478879759.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:00.217Z,1478879760.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:00.621Z,1478879760.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:01.033Z,1478879761.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:01.417Z,1478879761.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:01.853Z,1478879761.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:02.235Z,1478879762.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:02.614Z,1478879762.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:03.038Z,1478879763.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:03.421Z,1478879763.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:03.816Z,1478879763.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:04.221Z,1478879764.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:04.609Z,1478879764.609 [BPC1](ERROR): Failed to receive battery data
2016-11-11T15:56:04.609Z,1478879764.609 [BPC1] Communications Fault, FailCount= 1
2016-11-11T15:56:04.609Z,1478879764.609 [BPC1](ERROR): Communications Fault
2016-11-11T15:56:04.625Z,1478879764.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:04.674Z,1478879764.674 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T15:56:04.674Z,1478879764.674 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T15:56:05.048Z,1478879765.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:05.426Z,1478879765.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:05.828Z,1478879765.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:05.856Z,1478879765.856 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:56:05.857Z,1478879765.856 [BPC1] No Fault, FailCount= 1
2016-11-11T15:56:06.160Z,1478879766.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:56:06.281Z,1478879766.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:06.645Z,1478879766.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:06.956Z,1478879766.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:56:07.020Z,1478879767.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:07.418Z,1478879767.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:07.825Z,1478879767.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:08.221Z,1478879768.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:08.622Z,1478879768.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:09.025Z,1478879769.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:09.422Z,1478879769.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:09.821Z,1478879769.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:10.215Z,1478879770.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:10.626Z,1478879770.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:11.021Z,1478879771.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:11.429Z,1478879771.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:11.817Z,1478879771.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:12.218Z,1478879772.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:12.625Z,1478879772.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:13.017Z,1478879773.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:13.418Z,1478879773.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:13.820Z,1478879773.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:14.226Z,1478879774.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:14.618Z,1478879774.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:15.029Z,1478879775.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:15.429Z,1478879775.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:15.818Z,1478879775.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:16.229Z,1478879776.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:16.629Z,1478879776.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:17.029Z,1478879777.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:17.449Z,1478879777.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:17.836Z,1478879777.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:18.208Z,1478879778.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:18.646Z,1478879778.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:19.038Z,1478879779.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:19.449Z,1478879779.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:19.813Z,1478879779.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:20.249Z,1478879780.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:20.608Z,1478879780.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:21.017Z,1478879781.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:21.417Z,1478879781.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:21.813Z,1478879781.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:22.221Z,1478879782.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:22.612Z,1478879782.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:23.016Z,1478879783.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:23.414Z,1478879783.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:23.817Z,1478879783.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:24.224Z,1478879784.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:24.620Z,1478879784.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:25.021Z,1478879785.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:25.419Z,1478879785.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:25.825Z,1478879785.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:26.226Z,1478879786.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:26.623Z,1478879786.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:27.023Z,1478879787.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:27.425Z,1478879787.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:27.816Z,1478879787.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:28.229Z,1478879788.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:28.625Z,1478879788.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:29.023Z,1478879789.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:29.429Z,1478879789.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:29.825Z,1478879789.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:30.218Z,1478879790.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:30.621Z,1478879790.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:34.034Z,1478879794.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:34.165Z,1478879794.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:34.536Z,1478879794.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:34.946Z,1478879794.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:35.350Z,1478879795.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:35.762Z,1478879795.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:36.157Z,1478879796.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:36.524Z,1478879796.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:36.927Z,1478879796.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:37.363Z,1478879797.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:37.737Z,1478879797.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:38.137Z,1478879798.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:38.531Z,1478879798.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:38.928Z,1478879798.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:39.335Z,1478879799.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:39.738Z,1478879799.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:40.130Z,1478879800.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:40.549Z,1478879800.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:40.941Z,1478879800.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:41.323Z,1478879801.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:41.725Z,1478879801.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:42.129Z,1478879802.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:42.526Z,1478879802.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:42.932Z,1478879802.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:43.326Z,1478879803.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:43.729Z,1478879803.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:44.016Z,1478879804.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:56:44.132Z,1478879804.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:44.533Z,1478879804.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:44.813Z,1478879804.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:56:44.939Z,1478879804.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:45.224Z,1478879805.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:56:45.328Z,1478879805.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:45.734Z,1478879805.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:46.129Z,1478879806.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:46.538Z,1478879806.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:47.003Z,1478879807.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:47.325Z,1478879807.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:47.729Z,1478879807.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:48.154Z,1478879808.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:48.530Z,1478879808.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:48.962Z,1478879808.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:49.339Z,1478879809.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:49.766Z,1478879809.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:50.137Z,1478879810.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:50.554Z,1478879810.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:50.929Z,1478879810.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:51.339Z,1478879811.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:51.740Z,1478879811.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:52.137Z,1478879812.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:52.535Z,1478879812.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:52.940Z,1478879812.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:53.333Z,1478879813.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:53.739Z,1478879813.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:54.140Z,1478879814.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:54.540Z,1478879814.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:54.941Z,1478879814.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:55.340Z,1478879815.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:55.740Z,1478879815.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:56.139Z,1478879816.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:56.540Z,1478879816.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:56.953Z,1478879816.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:57.341Z,1478879817.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:57.725Z,1478879817.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:58.125Z,1478879818.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:58.523Z,1478879818.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:58.932Z,1478879818.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:59.326Z,1478879819.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:56:59.733Z,1478879819.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:00.131Z,1478879820.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:00.541Z,1478879820.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:00.946Z,1478879820.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:01.357Z,1478879821.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:01.737Z,1478879821.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:02.137Z,1478879822.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:02.568Z,1478879822.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:02.925Z,1478879822.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:03.349Z,1478879823.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:03.766Z,1478879823.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:04.124Z,1478879824.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:04.562Z,1478879824.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:04.929Z,1478879824.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:05.363Z,1478879825.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:05.733Z,1478879825.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:06.127Z,1478879826.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:06.532Z,1478879826.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:06.933Z,1478879826.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:07.332Z,1478879827.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:07.735Z,1478879827.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:08.133Z,1478879828.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:08.533Z,1478879828.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:08.941Z,1478879828.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:09.331Z,1478879829.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:09.739Z,1478879829.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:10.130Z,1478879830.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:10.574Z,1478879830.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:10.944Z,1478879830.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:11.326Z,1478879831.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:11.738Z,1478879831.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:12.173Z,1478879832.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:12.545Z,1478879832.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:12.962Z,1478879832.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:13.353Z,1478879833.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:13.761Z,1478879833.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:14.158Z,1478879834.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:14.537Z,1478879834.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:14.962Z,1478879834.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:15.348Z,1478879835.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:15.805Z,1478879835.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:16.158Z,1478879836.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:16.562Z,1478879836.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:16.993Z,1478879836.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:17.335Z,1478879837.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:17.757Z,1478879837.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:18.161Z,1478879838.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:18.564Z,1478879838.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:18.970Z,1478879838.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:19.363Z,1478879839.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:19.817Z,1478879839.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:20.124Z,1478879840.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:20.570Z,1478879840.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:20.959Z,1478879840.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:21.333Z,1478879841.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:21.733Z,1478879841.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:22.142Z,1478879842.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:22.541Z,1478879842.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:22.957Z,1478879842.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:23.337Z,1478879843.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:23.762Z,1478879843.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:24.147Z,1478879844.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:24.535Z,1478879844.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:25.018Z,1478879845.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:25.345Z,1478879845.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:25.737Z,1478879845.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:26.150Z,1478879846.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:26.539Z,1478879846.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:26.921Z,1478879846.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:27.337Z,1478879847.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:27.734Z,1478879847.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:28.164Z,1478879848.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:28.562Z,1478879848.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:28.939Z,1478879848.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:29.362Z,1478879849.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:29.757Z,1478879849.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:30.032Z,1478879850.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:57:30.189Z,1478879850.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:30.558Z,1478879850.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:30.828Z,1478879850.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:57:30.948Z,1478879850.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:31.592Z,1478879851.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:57:32.388Z,1478879852.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:57:33.185Z,1478879853.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:57:33.596Z,1478879853.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:57:34.306Z,1478879854.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:34.433Z,1478879854.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:34.802Z,1478879854.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:35.182Z,1478879855.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:35.605Z,1478879855.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:36.009Z,1478879856.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:36.377Z,1478879856.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:36.781Z,1478879856.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:37.181Z,1478879857.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:37.576Z,1478879857.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:37.982Z,1478879857.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:38.375Z,1478879858.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:38.824Z,1478879858.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:39.176Z,1478879859.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:39.575Z,1478879859.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:39.977Z,1478879859.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:40.376Z,1478879860.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:40.784Z,1478879860.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:41.176Z,1478879861.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:41.572Z,1478879861.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:41.975Z,1478879861.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:42.376Z,1478879862.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:42.834Z,1478879862.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:43.177Z,1478879863.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:43.581Z,1478879863.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:44.023Z,1478879864.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:44.381Z,1478879864.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:44.781Z,1478879864.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:45.226Z,1478879865.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:45.581Z,1478879865.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:45.972Z,1478879865.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:46.377Z,1478879866.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:46.774Z,1478879866.773 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T15:57:46.774Z,1478879866.774 [BPC1] Data Fault, FailCount= 1
2016-11-11T15:57:46.774Z,1478879866.774 [BPC1](ERROR): Data Fault
2016-11-11T15:57:46.786Z,1478879866.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:46.827Z,1478879866.827 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T15:57:47.196Z,1478879867.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:47.579Z,1478879867.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:47.981Z,1478879867.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:48.001Z,1478879868.001 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T15:57:48.002Z,1478879868.001 [BPC1] No Fault, FailCount= 1
2016-11-11T15:57:48.422Z,1478879868.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:48.805Z,1478879868.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:49.172Z,1478879869.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:49.570Z,1478879869.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:49.976Z,1478879869.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:50.385Z,1478879870.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:50.776Z,1478879870.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:51.182Z,1478879871.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:51.602Z,1478879871.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:51.997Z,1478879871.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:52.390Z,1478879872.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:52.796Z,1478879872.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:53.213Z,1478879873.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:53.594Z,1478879873.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:53.982Z,1478879873.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:54.374Z,1478879874.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:54.782Z,1478879874.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:55.202Z,1478879875.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:55.593Z,1478879875.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:55.990Z,1478879875.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:56.415Z,1478879876.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:56.846Z,1478879876.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:57.190Z,1478879877.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:57.605Z,1478879877.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:57.993Z,1478879877.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:58.394Z,1478879878.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:58.805Z,1478879878.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:59.213Z,1478879879.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:57:59.586Z,1478879879.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:00.002Z,1478879880.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:00.409Z,1478879880.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:00.814Z,1478879880.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:01.257Z,1478879881.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:01.593Z,1478879881.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:01.982Z,1478879881.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:02.410Z,1478879882.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:02.773Z,1478879882.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:03.217Z,1478879883.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:03.601Z,1478879883.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:04.005Z,1478879884.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:04.402Z,1478879884.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:04.798Z,1478879884.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:05.197Z,1478879885.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:05.594Z,1478879885.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:05.985Z,1478879885.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:06.389Z,1478879886.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:06.788Z,1478879886.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:07.188Z,1478879887.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:07.592Z,1478879887.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:07.988Z,1478879887.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:08.377Z,1478879888.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:08.794Z,1478879888.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:09.181Z,1478879889.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:09.588Z,1478879889.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:09.910Z,1478879889.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:09.993Z,1478879889.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:10.384Z,1478879890.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:10.704Z,1478879890.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:10.823Z,1478879890.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:11.182Z,1478879891.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:11.196Z,1478879891.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:11.586Z,1478879891.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:11.992Z,1478879891.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:11.993Z,1478879891.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:12.397Z,1478879892.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:12.776Z,1478879892.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:12.788Z,1478879892.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:13.212Z,1478879893.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:13.512Z,1478879893.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:13.585Z,1478879893.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:13.980Z,1478879893.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:14.308Z,1478879894.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:14.390Z,1478879894.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:14.782Z,1478879894.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:15.105Z,1478879895.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:15.178Z,1478879895.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:15.516Z,1478879895.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:15.613Z,1478879895.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:16.023Z,1478879896.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:16.312Z,1478879896.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:16.381Z,1478879896.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:16.785Z,1478879896.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:17.040Z,1478879897.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:17.220Z,1478879897.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:17.585Z,1478879897.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:17.836Z,1478879897.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:18.005Z,1478879898.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:18.398Z,1478879898.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:18.633Z,1478879898.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:18.789Z,1478879898.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:19.044Z,1478879899.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:19.188Z,1478879899.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:19.592Z,1478879899.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:19.840Z,1478879899.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:19.996Z,1478879899.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:20.398Z,1478879900.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:20.648Z,1478879900.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:20.777Z,1478879900.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:21.068Z,1478879901.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:21.177Z,1478879901.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:21.577Z,1478879901.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:21.864Z,1478879901.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:21.981Z,1478879901.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:22.378Z,1478879902.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:22.660Z,1478879902.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:22.789Z,1478879902.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:23.068Z,1478879903.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:23.185Z,1478879903.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:23.582Z,1478879903.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:23.864Z,1478879903.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:23.988Z,1478879903.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:24.390Z,1478879904.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:24.660Z,1478879904.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:24.808Z,1478879904.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:25.185Z,1478879905.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:25.200Z,1478879905.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:25.583Z,1478879905.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:25.988Z,1478879905.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:25.996Z,1478879905.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:26.393Z,1478879906.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:26.792Z,1478879906.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:26.794Z,1478879906.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:27.181Z,1478879907.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:27.492Z,1478879907.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:27.589Z,1478879907.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:27.993Z,1478879907.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:28.288Z,1478879908.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:28.392Z,1478879908.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:28.791Z,1478879908.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:29.085Z,1478879909.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:29.181Z,1478879909.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:29.496Z,1478879909.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:29.572Z,1478879909.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:29.977Z,1478879909.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:30.006Z,1478879910.006 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T15:58:30.006Z,1478879910.006 [Default:CheckIn:C.Wait] Stopped
2016-11-11T15:58:30.006Z,1478879910.006 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T15:58:30.006Z,1478879910.006 [Default:CheckIn:D] Running Loop=1
2016-11-11T15:58:30.292Z,1478879910.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:30.437Z,1478879910.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:30.446Z,1478879910.446 [Default:CheckIn:D] Stopped
2016-11-11T15:58:30.446Z,1478879910.446 [Default:CheckIn:E] Running Loop=1
2016-11-11T15:58:30.779Z,1478879910.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:30.789Z,1478879910.789 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 668.485612 min 
2016-11-11T15:58:30.789Z,1478879910.789 [Default:CheckIn:E] Stopped
2016-11-11T15:58:30.789Z,1478879910.789 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T15:58:30.789Z,1478879910.789 [Default:CheckIn] Stopped
2016-11-11T15:58:30.789Z,1478879910.789 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T15:58:30.789Z,1478879910.789 [Default:CheckIn](INFO): Running loop #65
2016-11-11T15:58:30.789Z,1478879910.789 [Default:CheckIn] Running Loop=65
2016-11-11T15:58:30.790Z,1478879910.790 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T15:58:30.790Z,1478879910.790 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T15:58:31.020Z,1478879911.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:31.219Z,1478879911.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:31.816Z,1478879911.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:32.613Z,1478879912.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:33.032Z,1478879913.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:33.828Z,1478879913.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:34.485Z,1478879914.485 [NAL9602](INFO): Powering up
2016-11-11T15:58:34.530Z,1478879914.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:34.626Z,1478879914.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:34.710Z,1478879914.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:35.029Z,1478879915.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:35.036Z,1478879915.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:35.395Z,1478879915.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:35.795Z,1478879915.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:35.832Z,1478879915.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:36.205Z,1478879916.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:36.629Z,1478879916.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:36.677Z,1478879916.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:37.009Z,1478879917.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:37.040Z,1478879917.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:37.406Z,1478879917.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:37.802Z,1478879917.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:37.836Z,1478879917.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:38.200Z,1478879918.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:38.602Z,1478879918.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:38.632Z,1478879918.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:39.012Z,1478879919.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:39.120Z,1478879919.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:39.404Z,1478879919.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:39.819Z,1478879919.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:39.916Z,1478879919.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:40.216Z,1478879920.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:40.594Z,1478879920.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:40.712Z,1478879920.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:41.019Z,1478879921.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:41.403Z,1478879921.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:41.496Z,1478879921.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:41.808Z,1478879921.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:42.205Z,1478879922.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:42.292Z,1478879922.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:42.605Z,1478879922.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:42.998Z,1478879922.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:43.089Z,1478879923.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:43.409Z,1478879923.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:43.500Z,1478879923.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:43.813Z,1478879923.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:44.192Z,1478879924.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:44.296Z,1478879924.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:44.663Z,1478879924.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:45.007Z,1478879925.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:45.032Z,1478879925.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:45.365Z,1478879925.365 [NAL9602](INFO): NAL9602 initialized
2016-11-11T15:58:45.410Z,1478879925.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:45.803Z,1478879925.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:45.828Z,1478879925.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:46.221Z,1478879926.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:46.624Z,1478879926.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:46.665Z,1478879926.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:47.032Z,1478879927.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:47.073Z,1478879927.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:47.397Z,1478879927.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:47.797Z,1478879927.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:47.828Z,1478879927.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:48.241Z,1478879928.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:48.624Z,1478879928.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:48.686Z,1478879928.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:49.032Z,1478879929.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:49.038Z,1478879929.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:49.438Z,1478879929.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:49.801Z,1478879929.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:49.828Z,1478879929.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:50.200Z,1478879930.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:50.624Z,1478879930.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:50.647Z,1478879930.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:51.012Z,1478879931.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:51.040Z,1478879931.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:51.405Z,1478879931.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:51.811Z,1478879931.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:51.860Z,1478879931.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:52.213Z,1478879932.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:52.608Z,1478879932.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:52.657Z,1478879932.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:53.001Z,1478879933.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:53.092Z,1478879933.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:53.406Z,1478879933.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:53.813Z,1478879933.813 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:53.814Z,1478879933.814 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 203
2016-11-11T15:58:53.814Z,1478879933.814 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T15:58:53.829Z,1478879933.829 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:53.829Z,1478879933.829 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 203
2016-11-11T15:58:53.829Z,1478879933.829 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T15:58:53.831Z,1478879933.831 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:53.831Z,1478879933.831 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 203
2016-11-11T15:58:53.831Z,1478879933.831 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T15:58:53.866Z,1478879933.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T15:58:53.866Z,1478879933.866 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T15:58:53.867Z,1478879933.867 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T15:58:53.888Z,1478879933.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:54.265Z,1478879934.265 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T15:58:54.265Z,1478879934.265 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 203
2016-11-11T15:58:54.266Z,1478879934.266 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T15:58:54.266Z,1478879934.266 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 203
2016-11-11T15:58:54.267Z,1478879934.267 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T15:58:54.267Z,1478879934.267 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 203
2016-11-11T15:58:54.613Z,1478879934.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T15:58:54.613Z,1478879934.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:58:54.614Z,1478879934.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:58:54.619Z,1478879934.619 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T15:58:54.619Z,1478879934.619 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:58:54.619Z,1478879934.619 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:58:54.620Z,1478879934.620 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T15:58:54.620Z,1478879934.620 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T15:58:54.621Z,1478879934.621 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T15:58:54.684Z,1478879934.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:55.040Z,1478879935.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:55.401Z,1478879935.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:55.468Z,1478879935.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:55.827Z,1478879935.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:56.196Z,1478879936.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:56.264Z,1478879936.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:56.598Z,1478879936.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:57.058Z,1478879937.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:57.068Z,1478879937.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:57.401Z,1478879937.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:57.480Z,1478879937.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:57.808Z,1478879937.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:58.204Z,1478879938.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:58.277Z,1478879938.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:58.665Z,1478879938.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:58.996Z,1478879938.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:59.011Z,1478879939.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:59.423Z,1478879939.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:58:59.792Z,1478879939.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:58:59.822Z,1478879939.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:00.219Z,1478879940.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:00.589Z,1478879940.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:00.638Z,1478879940.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:01.005Z,1478879941.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:01.036Z,1478879941.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:01.468Z,1478879941.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:01.808Z,1478879941.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:01.832Z,1478879941.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:02.241Z,1478879942.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:02.628Z,1478879942.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:02.641Z,1478879942.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:03.034Z,1478879943.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:03.036Z,1478879943.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:03.405Z,1478879943.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:03.832Z,1478879943.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:03.842Z,1478879943.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:04.207Z,1478879944.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:04.624Z,1478879944.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:04.628Z,1478879944.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:05.020Z,1478879945.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:05.036Z,1478879945.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:05.408Z,1478879945.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:05.808Z,1478879945.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:05.832Z,1478879945.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:06.211Z,1478879946.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:06.609Z,1478879946.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:06.628Z,1478879946.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:07.019Z,1478879947.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:07.072Z,1478879947.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:07.397Z,1478879947.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:07.802Z,1478879947.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:07.868Z,1478879947.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:08.205Z,1478879948.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:08.605Z,1478879948.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:08.664Z,1478879948.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:09.064Z,1478879949.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:09.417Z,1478879949.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:09.456Z,1478879949.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:09.817Z,1478879949.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:10.216Z,1478879950.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:10.252Z,1478879950.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:10.601Z,1478879950.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:11.048Z,1478879951.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:11.075Z,1478879951.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:11.414Z,1478879951.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:11.456Z,1478879951.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:11.805Z,1478879951.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:12.209Z,1478879952.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:12.252Z,1478879952.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:12.657Z,1478879952.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:12.960Z,1478879952.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:13.013Z,1478879953.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:13.421Z,1478879953.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:13.756Z,1478879953.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:13.817Z,1478879953.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:14.220Z,1478879954.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:14.556Z,1478879954.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:14.661Z,1478879954.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:14.968Z,1478879954.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:15.013Z,1478879955.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:15.419Z,1478879955.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:15.766Z,1478879955.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:15.841Z,1478879955.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:16.200Z,1478879956.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:16.560Z,1478879956.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:16.661Z,1478879956.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:16.972Z,1478879956.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:17.010Z,1478879957.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:17.426Z,1478879957.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:17.768Z,1478879957.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:17.833Z,1478879957.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:18.209Z,1478879958.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:18.566Z,1478879958.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:18.632Z,1478879958.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:18.976Z,1478879958.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:18.994Z,1478879958.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:19.415Z,1478879959.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:19.772Z,1478879959.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:19.833Z,1478879959.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:20.200Z,1478879960.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:20.568Z,1478879960.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:20.602Z,1478879960.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:21.000Z,1478879961.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:21.052Z,1478879961.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:21.402Z,1478879961.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:21.809Z,1478879961.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:21.848Z,1478879961.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:22.211Z,1478879962.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:22.601Z,1478879962.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:22.644Z,1478879962.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:23.052Z,1478879963.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:23.421Z,1478879963.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:23.440Z,1478879963.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:23.817Z,1478879963.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:23.856Z,1478879963.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:24.225Z,1478879964.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:24.597Z,1478879964.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:24.652Z,1478879964.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:25.061Z,1478879965.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:25.408Z,1478879965.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:25.410Z,1478879965.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:25.805Z,1478879965.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:26.204Z,1478879966.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:26.214Z,1478879966.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:26.625Z,1478879966.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:26.932Z,1478879966.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:27.005Z,1478879967.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:27.399Z,1478879967.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:27.728Z,1478879967.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:27.805Z,1478879967.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:28.200Z,1478879968.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:28.525Z,1478879968.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:28.613Z,1478879968.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:28.936Z,1478879968.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:29.015Z,1478879969.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:29.405Z,1478879969.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:29.732Z,1478879969.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:29.833Z,1478879969.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:30.236Z,1478879970.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:30.529Z,1478879970.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:30.620Z,1478879970.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:30.940Z,1478879970.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:31.029Z,1478879971.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:31.422Z,1478879971.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:31.736Z,1478879971.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:32.533Z,1478879972.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:32.944Z,1478879972.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:33.740Z,1478879973.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:34.536Z,1478879974.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:34.867Z,1478879974.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:35.003Z,1478879975.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:35.036Z,1478879975.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:35.381Z,1478879975.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:35.757Z,1478879975.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:35.832Z,1478879975.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:36.148Z,1478879976.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:36.545Z,1478879976.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:36.628Z,1478879976.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:37.016Z,1478879977.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:37.364Z,1478879977.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:37.396Z,1478879977.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:37.753Z,1478879977.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:38.157Z,1478879978.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:38.192Z,1478879978.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:38.553Z,1478879978.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:38.988Z,1478879978.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:39.014Z,1478879979.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:39.341Z,1478879979.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:39.400Z,1478879979.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:39.749Z,1478879979.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:40.149Z,1478879980.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:40.196Z,1478879980.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:40.601Z,1478879980.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:40.968Z,1478879980.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:40.981Z,1478879980.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:41.364Z,1478879981.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:41.764Z,1478879981.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:41.767Z,1478879981.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:42.170Z,1478879982.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:42.560Z,1478879982.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:42.580Z,1478879982.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:42.962Z,1478879982.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:42.968Z,1478879982.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:43.341Z,1478879983.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:43.740Z,1478879983.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:43.764Z,1478879983.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:44.149Z,1478879984.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:44.560Z,1478879984.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:44.583Z,1478879984.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:44.952Z,1478879984.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:44.968Z,1478879984.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:45.350Z,1478879985.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:45.754Z,1478879985.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:45.764Z,1478879985.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:46.162Z,1478879986.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:46.560Z,1478879986.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:46.606Z,1478879986.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:46.957Z,1478879986.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:46.968Z,1478879986.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:47.385Z,1478879987.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:47.757Z,1478879987.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:47.764Z,1478879987.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:48.138Z,1478879988.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:48.560Z,1478879988.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:48.608Z,1478879988.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:48.944Z,1478879988.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:49.024Z,1478879989.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:49.378Z,1478879989.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:49.774Z,1478879989.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:49.820Z,1478879989.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:50.150Z,1478879990.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:50.547Z,1478879990.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:50.616Z,1478879990.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:51.003Z,1478879991.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:51.345Z,1478879991.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:51.376Z,1478879991.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:51.754Z,1478879991.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:52.149Z,1478879992.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:52.204Z,1478879992.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:52.555Z,1478879992.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:52.992Z,1478879992.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:53.000Z,1478879993.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:53.349Z,1478879993.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:53.408Z,1478879993.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:53.744Z,1478879993.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:54.154Z,1478879994.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:54.204Z,1478879994.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:54.569Z,1478879994.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:54.892Z,1478879994.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:54.961Z,1478879994.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:55.356Z,1478879995.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:55.688Z,1478879995.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:55.757Z,1478879995.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:56.157Z,1478879996.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:56.486Z,1478879996.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:56.577Z,1478879996.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:56.921Z,1478879996.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:56.950Z,1478879996.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:57.349Z,1478879997.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:57.719Z,1478879997.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:57.741Z,1478879997.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:58.149Z,1478879998.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:58.519Z,1478879998.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:58.581Z,1478879998.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:58.956Z,1478879998.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:58.958Z,1478879998.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:59.352Z,1478879999.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T15:59:59.752Z,1478879999.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T15:59:59.754Z,1478879999.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:00.145Z,1478880000.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:00.548Z,1478880000.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:00.564Z,1478880000.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:00.953Z,1478880000.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:00.956Z,1478880000.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:01.357Z,1478880001.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:01.752Z,1478880001.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:01.785Z,1478880001.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:02.193Z,1478880002.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:02.549Z,1478880002.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:02.585Z,1478880002.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:02.993Z,1478880002.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:03.012Z,1478880003.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:03.348Z,1478880003.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:03.792Z,1478880003.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:03.808Z,1478880003.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:04.186Z,1478880004.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:04.556Z,1478880004.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:04.604Z,1478880004.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:05.018Z,1478880005.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:05.345Z,1478880005.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:05.348Z,1478880005.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:05.743Z,1478880005.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:06.144Z,1478880006.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:06.157Z,1478880006.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:06.552Z,1478880006.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:06.941Z,1478880006.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:07.032Z,1478880007.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:07.345Z,1478880007.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:07.352Z,1478880007.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:07.757Z,1478880007.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:08.148Z,1478880008.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:08.154Z,1478880008.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:08.565Z,1478880008.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:08.868Z,1478880008.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:08.956Z,1478880008.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:09.357Z,1478880009.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:09.664Z,1478880009.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:09.756Z,1478880009.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:10.157Z,1478880010.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:10.461Z,1478880010.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:10.566Z,1478880010.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:10.872Z,1478880010.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:10.962Z,1478880010.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:11.362Z,1478880011.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:11.668Z,1478880011.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:11.736Z,1478880011.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:12.141Z,1478880012.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:12.465Z,1478880012.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:12.554Z,1478880012.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:12.876Z,1478880012.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:12.975Z,1478880012.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:13.353Z,1478880013.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:13.672Z,1478880013.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:13.753Z,1478880013.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:14.106Z,1478880014.106 [NAL9602](INFO): SBD MO Status=0, MOMSN=350, MT Status=0, MTMSN=0
2016-11-11T16:00:14.106Z,1478880014.106 [NAL9602](INFO): No messages in MT queue
2016-11-11T16:00:14.149Z,1478880014.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:14.469Z,1478880014.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:14.560Z,1478880014.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:14.888Z,1478880014.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:14.960Z,1478880014.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:15.362Z,1478880015.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:15.686Z,1478880015.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:15.759Z,1478880015.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:16.182Z,1478880016.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:16.480Z,1478880016.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:16.646Z,1478880016.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:16.938Z,1478880016.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:16.996Z,1478880016.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:17.381Z,1478880017.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:17.770Z,1478880017.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:17.792Z,1478880017.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:18.197Z,1478880018.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:18.575Z,1478880018.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:18.588Z,1478880018.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:18.972Z,1478880018.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:19.359Z,1478880019.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:19.368Z,1478880019.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:19.760Z,1478880019.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:20.161Z,1478880020.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:20.164Z,1478880020.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:20.558Z,1478880020.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:20.960Z,1478880020.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:21.008Z,1478880021.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:21.361Z,1478880021.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:21.368Z,1478880021.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:21.760Z,1478880021.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:22.161Z,1478880022.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:22.164Z,1478880022.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:22.545Z,1478880022.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:22.848Z,1478880022.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:22.951Z,1478880022.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:23.352Z,1478880023.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:23.644Z,1478880023.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:23.765Z,1478880023.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:24.158Z,1478880024.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:24.441Z,1478880024.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:24.555Z,1478880024.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:24.852Z,1478880024.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:24.953Z,1478880024.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:25.346Z,1478880025.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:25.648Z,1478880025.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:25.757Z,1478880025.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:26.158Z,1478880026.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:26.445Z,1478880026.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:26.554Z,1478880026.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:26.856Z,1478880026.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:26.959Z,1478880026.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:27.363Z,1478880027.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:27.652Z,1478880027.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:27.772Z,1478880027.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:28.156Z,1478880028.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:28.449Z,1478880028.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:28.557Z,1478880028.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:28.860Z,1478880028.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:28.965Z,1478880028.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:29.341Z,1478880029.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:29.656Z,1478880029.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:29.773Z,1478880029.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:30.190Z,1478880030.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:30.454Z,1478880030.454 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:30.584Z,1478880030.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:30.958Z,1478880030.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:30.980Z,1478880030.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:31.356Z,1478880031.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:31.753Z,1478880031.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:31.776Z,1478880031.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:32.572Z,1478880032.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:33.304Z,1478880033.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:34.100Z,1478880034.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:34.899Z,1478880034.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:35.312Z,1478880035.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:35.327Z,1478880035.327 [BPC1](ERROR): Failed to receive battery data
2016-11-11T16:00:35.327Z,1478880035.327 [BPC1] Communications Fault, FailCount= 1
2016-11-11T16:00:35.327Z,1478880035.327 [BPC1](ERROR): Communications Fault
2016-11-11T16:00:35.336Z,1478880035.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:35.387Z,1478880035.387 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T16:00:35.477Z,1478880035.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:35.875Z,1478880035.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:36.109Z,1478880036.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:36.280Z,1478880036.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:36.301Z,1478880036.300 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:00:36.301Z,1478880036.301 [BPC1] No Fault, FailCount= 1
2016-11-11T16:00:36.715Z,1478880036.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:36.832Z,1478880036.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:37.089Z,1478880037.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:37.449Z,1478880037.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:37.628Z,1478880037.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:37.849Z,1478880037.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:38.247Z,1478880038.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:38.424Z,1478880038.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:38.663Z,1478880038.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:38.840Z,1478880038.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:39.061Z,1478880039.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:39.465Z,1478880039.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:39.636Z,1478880039.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:39.860Z,1478880039.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:40.254Z,1478880040.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:40.433Z,1478880040.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:40.656Z,1478880040.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:40.844Z,1478880040.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:41.069Z,1478880041.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:41.466Z,1478880041.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:41.640Z,1478880041.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:41.865Z,1478880041.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:42.257Z,1478880042.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:42.439Z,1478880042.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:42.656Z,1478880042.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:42.852Z,1478880042.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:43.058Z,1478880043.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:43.461Z,1478880043.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:43.648Z,1478880043.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:43.863Z,1478880043.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:44.265Z,1478880044.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:44.444Z,1478880044.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:44.664Z,1478880044.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:44.924Z,1478880044.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:45.057Z,1478880045.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:45.461Z,1478880045.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:45.720Z,1478880045.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:45.861Z,1478880045.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:46.253Z,1478880046.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:46.516Z,1478880046.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:46.661Z,1478880046.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:47.062Z,1478880047.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:47.280Z,1478880047.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:47.473Z,1478880047.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:47.890Z,1478880047.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:48.076Z,1478880048.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:48.269Z,1478880048.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:48.648Z,1478880048.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:48.872Z,1478880048.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:49.057Z,1478880049.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:49.284Z,1478880049.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:49.479Z,1478880049.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:49.857Z,1478880049.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:50.080Z,1478880050.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:50.294Z,1478880050.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:50.701Z,1478880050.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:50.812Z,1478880050.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:51.061Z,1478880051.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:51.465Z,1478880051.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:51.608Z,1478880051.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:51.849Z,1478880051.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:52.257Z,1478880052.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:52.408Z,1478880052.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:52.657Z,1478880052.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:52.840Z,1478880052.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:53.061Z,1478880053.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:53.455Z,1478880053.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:53.636Z,1478880053.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:53.861Z,1478880053.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:54.253Z,1478880054.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:54.432Z,1478880054.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:54.655Z,1478880054.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:54.844Z,1478880054.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:55.050Z,1478880055.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:55.460Z,1478880055.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:55.640Z,1478880055.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:55.861Z,1478880055.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:56.278Z,1478880056.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:56.436Z,1478880056.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:56.661Z,1478880056.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:56.844Z,1478880056.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:57.045Z,1478880057.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:57.469Z,1478880057.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:57.640Z,1478880057.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:57.848Z,1478880057.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:58.245Z,1478880058.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:58.436Z,1478880058.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:58.657Z,1478880058.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:58.904Z,1478880058.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:59.055Z,1478880059.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:59.459Z,1478880059.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:00:59.700Z,1478880059.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:00:59.870Z,1478880059.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:00.261Z,1478880060.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:00.497Z,1478880060.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:00.657Z,1478880060.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:01.060Z,1478880061.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:01.260Z,1478880061.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:01.484Z,1478880061.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:01.862Z,1478880061.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:02.056Z,1478880062.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:02.275Z,1478880062.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:02.673Z,1478880062.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:02.853Z,1478880062.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:03.097Z,1478880063.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:03.264Z,1478880063.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:03.449Z,1478880063.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:03.879Z,1478880063.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:04.060Z,1478880064.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:04.253Z,1478880064.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:04.681Z,1478880064.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:04.784Z,1478880064.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:05.082Z,1478880065.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:05.455Z,1478880065.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:05.580Z,1478880065.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:05.859Z,1478880065.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:06.249Z,1478880066.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:06.377Z,1478880066.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:06.655Z,1478880066.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:06.788Z,1478880066.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:07.058Z,1478880067.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:07.457Z,1478880067.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:07.584Z,1478880067.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:07.863Z,1478880067.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:08.266Z,1478880068.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:08.381Z,1478880068.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:08.665Z,1478880068.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:08.796Z,1478880068.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:09.057Z,1478880069.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:09.460Z,1478880069.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:09.592Z,1478880069.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:09.861Z,1478880069.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:10.254Z,1478880070.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:10.389Z,1478880070.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:10.661Z,1478880070.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:10.808Z,1478880070.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:11.067Z,1478880071.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:11.467Z,1478880071.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:11.606Z,1478880071.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:11.875Z,1478880071.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:12.257Z,1478880072.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:12.400Z,1478880072.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:12.649Z,1478880072.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:12.880Z,1478880072.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:13.052Z,1478880073.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:13.458Z,1478880073.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:13.676Z,1478880073.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:13.863Z,1478880073.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:14.264Z,1478880074.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:14.472Z,1478880074.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:14.677Z,1478880074.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:15.062Z,1478880075.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:15.240Z,1478880075.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:15.469Z,1478880075.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:15.885Z,1478880075.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:16.036Z,1478880076.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:16.254Z,1478880076.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:16.657Z,1478880076.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:16.833Z,1478880076.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:17.116Z,1478880077.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:17.244Z,1478880077.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:17.465Z,1478880077.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:17.867Z,1478880077.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:18.042Z,1478880078.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:18.270Z,1478880078.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:18.648Z,1478880078.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:18.764Z,1478880078.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:19.085Z,1478880079.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:19.477Z,1478880079.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:19.560Z,1478880079.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:19.853Z,1478880079.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:20.266Z,1478880080.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:20.357Z,1478880080.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:20.681Z,1478880080.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:20.772Z,1478880080.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:21.045Z,1478880081.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:21.454Z,1478880081.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:21.568Z,1478880081.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:21.847Z,1478880081.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:22.257Z,1478880082.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:22.365Z,1478880082.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:22.646Z,1478880082.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:22.776Z,1478880082.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:23.059Z,1478880083.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:23.477Z,1478880083.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:23.572Z,1478880083.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:23.877Z,1478880083.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:24.248Z,1478880084.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:24.368Z,1478880084.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:24.645Z,1478880084.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:24.780Z,1478880084.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:25.045Z,1478880085.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:25.448Z,1478880085.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:25.576Z,1478880085.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:25.851Z,1478880085.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:26.256Z,1478880086.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:26.374Z,1478880086.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:26.661Z,1478880086.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:26.856Z,1478880086.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:27.058Z,1478880087.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:27.450Z,1478880087.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:27.652Z,1478880087.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:27.857Z,1478880087.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:28.242Z,1478880088.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:28.450Z,1478880088.450 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:28.665Z,1478880088.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:29.075Z,1478880089.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:29.216Z,1478880089.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:29.470Z,1478880089.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:29.871Z,1478880089.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:30.013Z,1478880090.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:30.295Z,1478880090.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:30.653Z,1478880090.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:30.812Z,1478880090.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:31.058Z,1478880091.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:31.244Z,1478880091.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:31.474Z,1478880091.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:31.869Z,1478880091.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:32.040Z,1478880092.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:32.740Z,1478880092.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:33.537Z,1478880093.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:34.333Z,1478880094.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:34.752Z,1478880094.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:35.505Z,1478880095.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:35.548Z,1478880095.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:35.633Z,1478880095.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:36.023Z,1478880096.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:36.352Z,1478880096.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:36.447Z,1478880096.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:36.788Z,1478880096.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:36.790Z,1478880096.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:37.201Z,1478880097.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:37.584Z,1478880097.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:37.604Z,1478880097.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:37.999Z,1478880097.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:38.380Z,1478880098.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:38.442Z,1478880098.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:38.775Z,1478880098.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:38.788Z,1478880098.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:39.177Z,1478880099.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:39.584Z,1478880099.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:39.586Z,1478880099.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:39.990Z,1478880099.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:40.380Z,1478880100.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:40.385Z,1478880100.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:40.797Z,1478880100.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:40.860Z,1478880100.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:41.196Z,1478880101.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:41.597Z,1478880101.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:41.656Z,1478880101.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:41.978Z,1478880101.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:42.375Z,1478880102.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:42.452Z,1478880102.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:42.825Z,1478880102.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:43.178Z,1478880103.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:43.208Z,1478880103.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:43.608Z,1478880103.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:44.004Z,1478880104.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:44.004Z,1478880104.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:44.385Z,1478880104.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:44.800Z,1478880104.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:44.860Z,1478880104.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:45.193Z,1478880105.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:45.212Z,1478880105.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:45.574Z,1478880105.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:45.977Z,1478880105.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:46.008Z,1478880106.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:46.397Z,1478880106.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:46.720Z,1478880106.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:46.823Z,1478880106.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:47.197Z,1478880107.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:47.516Z,1478880107.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:47.589Z,1478880107.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:47.986Z,1478880107.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:48.313Z,1478880108.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:48.445Z,1478880108.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:48.724Z,1478880108.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:48.790Z,1478880108.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:49.189Z,1478880109.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:49.520Z,1478880109.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:49.624Z,1478880109.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:50.005Z,1478880110.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:50.317Z,1478880110.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:50.414Z,1478880110.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:50.739Z,1478880110.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:50.811Z,1478880110.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:51.186Z,1478880111.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:51.536Z,1478880111.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:51.584Z,1478880111.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:51.985Z,1478880111.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:52.332Z,1478880112.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:52.408Z,1478880112.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:52.744Z,1478880112.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:52.799Z,1478880112.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:53.198Z,1478880113.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:53.540Z,1478880113.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:53.587Z,1478880113.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:53.981Z,1478880113.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:54.336Z,1478880114.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:54.451Z,1478880114.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:54.789Z,1478880114.789 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:54.789Z,1478880114.789 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 204
2016-11-11T16:01:54.789Z,1478880114.789 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:01:54.796Z,1478880114.796 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:54.796Z,1478880114.796 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 204
2016-11-11T16:01:54.796Z,1478880114.796 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:01:54.798Z,1478880114.798 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:54.798Z,1478880114.798 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 204
2016-11-11T16:01:54.798Z,1478880114.798 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:01:54.840Z,1478880114.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:54.844Z,1478880114.844 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:01:54.844Z,1478880114.844 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:01:54.845Z,1478880114.845 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:01:55.200Z,1478880115.200 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:01:55.200Z,1478880115.201 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 204
2016-11-11T16:01:55.201Z,1478880115.201 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:01:55.201Z,1478880115.201 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 204
2016-11-11T16:01:55.202Z,1478880115.202 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:01:55.202Z,1478880115.202 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 204
2016-11-11T16:01:55.591Z,1478880115.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:01:55.592Z,1478880115.592 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:01:55.592Z,1478880115.592 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:01:55.597Z,1478880115.597 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:01:55.597Z,1478880115.597 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:01:55.598Z,1478880115.598 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:01:55.598Z,1478880115.598 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:01:55.599Z,1478880115.599 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:01:55.599Z,1478880115.599 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:01:55.636Z,1478880115.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:55.999Z,1478880115.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:56.399Z,1478880116.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:56.433Z,1478880116.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:56.869Z,1478880116.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:57.176Z,1478880117.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:57.179Z,1478880117.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:57.581Z,1478880117.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:57.972Z,1478880117.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:57.982Z,1478880117.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:58.381Z,1478880118.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:58.768Z,1478880118.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:58.860Z,1478880118.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:59.201Z,1478880119.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:59.208Z,1478880119.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:01:59.580Z,1478880119.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:01:59.978Z,1478880119.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:00.004Z,1478880120.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:00.390Z,1478880120.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:00.700Z,1478880120.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:00.785Z,1478880120.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:01.184Z,1478880121.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:01.496Z,1478880121.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:01.637Z,1478880121.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:01.993Z,1478880121.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:02.292Z,1478880122.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:02.389Z,1478880122.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:02.704Z,1478880122.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:02.805Z,1478880122.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:03.188Z,1478880123.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:03.500Z,1478880123.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:03.586Z,1478880123.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:04.035Z,1478880124.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:04.304Z,1478880124.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:04.398Z,1478880124.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:04.740Z,1478880124.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:04.828Z,1478880124.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:05.233Z,1478880125.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:05.536Z,1478880125.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:05.600Z,1478880125.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:05.981Z,1478880125.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:06.332Z,1478880126.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:06.397Z,1478880126.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:06.744Z,1478880126.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:06.782Z,1478880126.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:07.186Z,1478880127.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:07.560Z,1478880127.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:07.608Z,1478880127.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:08.014Z,1478880128.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:08.357Z,1478880128.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:08.465Z,1478880128.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:08.823Z,1478880128.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:08.860Z,1478880128.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:09.185Z,1478880129.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:09.580Z,1478880129.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:09.656Z,1478880129.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:09.998Z,1478880129.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:10.391Z,1478880130.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:10.452Z,1478880130.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:10.839Z,1478880130.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:11.237Z,1478880131.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:11.249Z,1478880131.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:11.604Z,1478880131.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:11.656Z,1478880131.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:11.988Z,1478880131.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:12.394Z,1478880132.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:12.452Z,1478880132.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:12.866Z,1478880132.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:13.176Z,1478880133.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:13.186Z,1478880133.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:13.597Z,1478880133.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:13.972Z,1478880133.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:14.009Z,1478880134.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:14.418Z,1478880134.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:14.688Z,1478880134.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:14.818Z,1478880134.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:15.191Z,1478880135.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:15.484Z,1478880135.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:15.593Z,1478880135.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:16.023Z,1478880136.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:16.281Z,1478880136.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:16.400Z,1478880136.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:16.692Z,1478880136.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:16.788Z,1478880136.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:17.264Z,1478880137.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:17.488Z,1478880137.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:17.594Z,1478880137.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:18.010Z,1478880138.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:18.285Z,1478880138.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:18.444Z,1478880138.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:18.696Z,1478880138.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:18.806Z,1478880138.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:19.223Z,1478880139.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:19.492Z,1478880139.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:19.648Z,1478880139.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:19.993Z,1478880139.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:20.289Z,1478880140.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:20.411Z,1478880140.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:20.700Z,1478880140.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:20.813Z,1478880140.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:21.175Z,1478880141.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:21.496Z,1478880141.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:21.619Z,1478880141.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:22.010Z,1478880142.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:22.292Z,1478880142.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:22.460Z,1478880142.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:22.798Z,1478880142.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:22.828Z,1478880142.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:23.201Z,1478880143.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:23.614Z,1478880143.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:23.628Z,1478880143.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:23.990Z,1478880143.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:24.405Z,1478880144.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:24.424Z,1478880144.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:24.848Z,1478880144.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:25.128Z,1478880145.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:25.213Z,1478880145.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:25.621Z,1478880145.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:25.924Z,1478880145.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:26.030Z,1478880146.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:26.401Z,1478880146.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:26.721Z,1478880146.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:26.828Z,1478880146.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:27.161Z,1478880147.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:27.213Z,1478880147.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:27.590Z,1478880147.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:27.957Z,1478880147.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:28.001Z,1478880148.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:28.382Z,1478880148.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:28.664Z,1478880148.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:28.790Z,1478880148.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:29.194Z,1478880149.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:29.460Z,1478880149.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:29.594Z,1478880149.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:29.977Z,1478880149.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:30.257Z,1478880150.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:30.422Z,1478880150.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:30.668Z,1478880150.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:30.798Z,1478880150.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:31.193Z,1478880151.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:31.464Z,1478880151.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:31.599Z,1478880151.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:32.058Z,1478880152.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:32.261Z,1478880152.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:32.672Z,1478880152.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:33.469Z,1478880153.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:34.264Z,1478880154.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:34.672Z,1478880154.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:35.468Z,1478880155.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:36.264Z,1478880156.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:36.740Z,1478880156.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:37.536Z,1478880157.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:38.332Z,1478880158.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:38.461Z,1478880158.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:38.577Z,1478880158.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:38.993Z,1478880158.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:39.092Z,1478880159.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:39.350Z,1478880159.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:39.804Z,1478880159.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:39.888Z,1478880159.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:40.155Z,1478880160.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:40.549Z,1478880160.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:40.685Z,1478880160.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:40.954Z,1478880160.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:41.096Z,1478880161.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:41.364Z,1478880161.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:41.761Z,1478880161.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:41.892Z,1478880161.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:42.154Z,1478880162.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:42.533Z,1478880162.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:42.632Z,1478880162.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:42.934Z,1478880162.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:43.327Z,1478880163.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:43.428Z,1478880163.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:43.761Z,1478880163.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:44.146Z,1478880164.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:44.233Z,1478880164.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:44.539Z,1478880164.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:44.652Z,1478880164.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:44.934Z,1478880164.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:45.366Z,1478880165.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:45.448Z,1478880165.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:45.729Z,1478880165.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:46.141Z,1478880166.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:46.244Z,1478880166.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:46.535Z,1478880166.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:46.656Z,1478880166.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:46.950Z,1478880166.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:47.348Z,1478880167.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:47.452Z,1478880167.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:47.749Z,1478880167.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:48.137Z,1478880168.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:48.248Z,1478880168.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:48.533Z,1478880168.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:48.656Z,1478880168.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:48.934Z,1478880168.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:49.333Z,1478880169.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:49.452Z,1478880169.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:49.743Z,1478880169.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:50.149Z,1478880170.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:50.248Z,1478880170.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:50.539Z,1478880170.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:50.740Z,1478880170.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:50.954Z,1478880170.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:51.332Z,1478880171.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:51.536Z,1478880171.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:51.745Z,1478880171.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:52.134Z,1478880172.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:52.332Z,1478880172.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:52.584Z,1478880172.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:52.940Z,1478880172.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:53.072Z,1478880173.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:53.348Z,1478880173.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:53.773Z,1478880173.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:53.868Z,1478880173.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:54.137Z,1478880174.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:54.565Z,1478880174.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:54.665Z,1478880174.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:54.961Z,1478880174.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:55.076Z,1478880175.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:55.333Z,1478880175.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:55.744Z,1478880175.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:55.872Z,1478880175.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:56.149Z,1478880176.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:56.562Z,1478880176.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:56.600Z,1478880176.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:56.951Z,1478880176.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:57.333Z,1478880177.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:57.396Z,1478880177.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:57.734Z,1478880177.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:58.129Z,1478880178.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:58.193Z,1478880178.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:58.537Z,1478880178.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:58.604Z,1478880178.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:58.940Z,1478880178.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:59.348Z,1478880179.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:02:59.400Z,1478880179.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:02:59.754Z,1478880179.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:00.139Z,1478880180.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:00.197Z,1478880180.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:00.577Z,1478880180.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:00.608Z,1478880180.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:00.934Z,1478880180.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:01.329Z,1478880181.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:01.404Z,1478880181.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:01.749Z,1478880181.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:02.201Z,1478880182.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:02.235Z,1478880182.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:02.561Z,1478880182.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:02.612Z,1478880182.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:02.933Z,1478880182.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:03.336Z,1478880183.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:03.408Z,1478880183.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:03.737Z,1478880183.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:04.130Z,1478880184.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:04.204Z,1478880184.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:04.541Z,1478880184.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:04.692Z,1478880184.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:04.946Z,1478880184.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:05.365Z,1478880185.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:05.488Z,1478880185.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:05.779Z,1478880185.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:06.146Z,1478880186.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:06.284Z,1478880186.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:06.536Z,1478880186.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:06.956Z,1478880186.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:07.080Z,1478880187.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:07.348Z,1478880187.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:07.488Z,1478880187.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:07.781Z,1478880187.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:08.149Z,1478880188.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:08.284Z,1478880188.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:08.577Z,1478880188.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:08.957Z,1478880188.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:09.060Z,1478880189.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:09.357Z,1478880189.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:09.750Z,1478880189.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:09.856Z,1478880189.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:10.166Z,1478880190.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:10.540Z,1478880190.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:10.592Z,1478880190.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:10.952Z,1478880190.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:11.366Z,1478880191.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:11.388Z,1478880191.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:11.763Z,1478880191.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:12.174Z,1478880192.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:12.185Z,1478880192.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:12.546Z,1478880192.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:12.596Z,1478880192.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:12.953Z,1478880192.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:13.369Z,1478880193.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:13.392Z,1478880193.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:13.759Z,1478880193.759 [PNI_TCM](ERROR): CRC does not match. Expected:0x28136 got:0x59500
2016-11-11T16:03:13.785Z,1478880193.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:14.189Z,1478880194.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:14.224Z,1478880194.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:14.557Z,1478880194.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:14.600Z,1478880194.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:14.949Z,1478880194.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:15.350Z,1478880195.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:15.396Z,1478880195.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:15.732Z,1478880195.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:16.192Z,1478880196.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:16.219Z,1478880196.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:16.559Z,1478880196.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:16.604Z,1478880196.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:16.946Z,1478880196.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:17.384Z,1478880197.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:17.416Z,1478880197.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:17.743Z,1478880197.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:18.149Z,1478880198.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:18.212Z,1478880198.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:18.547Z,1478880198.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:18.680Z,1478880198.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:18.978Z,1478880198.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:19.349Z,1478880199.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:19.476Z,1478880199.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:19.750Z,1478880199.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:20.160Z,1478880200.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:20.272Z,1478880200.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:20.554Z,1478880200.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:20.957Z,1478880200.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:21.028Z,1478880201.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:21.374Z,1478880201.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:21.725Z,1478880201.725 [PNI_TCM](ERROR): CRC does not match. Expected:0x40496 got:0x1857
2016-11-11T16:03:21.763Z,1478880201.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:21.824Z,1478880201.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:22.160Z,1478880202.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:22.565Z,1478880202.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:22.962Z,1478880202.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:23.389Z,1478880203.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:23.789Z,1478880203.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:24.190Z,1478880204.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:24.553Z,1478880204.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:24.930Z,1478880204.930 [PNI_TCM](ERROR): CRC does not match. Expected:0x8580 got:0x49152
2016-11-11T16:03:24.954Z,1478880204.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:25.341Z,1478880205.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:25.753Z,1478880205.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:26.217Z,1478880206.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:26.550Z,1478880206.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:26.958Z,1478880206.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:27.357Z,1478880207.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:27.757Z,1478880207.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:28.194Z,1478880208.194 [PNI_TCM](ERROR): CRC does not match. Expected:0x18067 got:0x49579
2016-11-11T16:03:28.225Z,1478880208.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:28.545Z,1478880208.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:28.950Z,1478880208.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:29.349Z,1478880209.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:29.752Z,1478880209.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:30.230Z,1478880210.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:30.577Z,1478880210.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:30.946Z,1478880210.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:30.964Z,1478880210.964 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T15:58:30.8Z
2016-11-11T16:03:30.964Z,1478880210.964 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T16:03:30.964Z,1478880210.964 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T16:03:31.339Z,1478880211.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:31.376Z,1478880211.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:32.172Z,1478880212.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:32.308Z,1478880212.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:32.437Z,1478880212.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:32.648Z,1478880212.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:33.444Z,1478880213.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:34.240Z,1478880214.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:35.012Z,1478880215.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:35.808Z,1478880215.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:36.065Z,1478880216.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:36.131Z,1478880216.131 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0260.lzma
2016-11-11T16:03:36.197Z,1478880216.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:36.536Z,1478880216.536 [NAL9602](INFO): Powering down
2016-11-11T16:03:36.604Z,1478880216.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:36.641Z,1478880216.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:37.400Z,1478880217.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:38.196Z,1478880218.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:38.992Z,1478880218.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:39.788Z,1478880219.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:40.584Z,1478880220.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:41.380Z,1478880221.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:42.176Z,1478880222.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:44.564Z,1478880224.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:45.360Z,1478880225.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:46.156Z,1478880226.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:46.952Z,1478880226.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:47.748Z,1478880227.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:48.544Z,1478880228.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:57.300Z,1478880237.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:57.632Z,1478880237.632 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0260.lzma.bak
2016-11-11T16:03:57.632Z,1478880237.632 [DataOverHttps](INFO): SBD MOMSN=4555554
2016-11-11T16:03:57.733Z,1478880237.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:58.088Z,1478880238.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:58.500Z,1478880238.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:58.908Z,1478880238.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:59.252Z,1478880239.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:59.316Z,1478880239.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:03:59.405Z,1478880239.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:03:59.724Z,1478880239.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:04:00.132Z,1478880240.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:04:00.540Z,1478880240.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:04:00.948Z,1478880240.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:04:02.939Z,1478880242.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:03.065Z,1478880243.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:03.445Z,1478880243.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:03.837Z,1478880243.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:04.234Z,1478880244.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:04.632Z,1478880244.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:08.128Z,1478880248.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:08.199Z,1478880248.199 [DataOverHttps](INFO): Sending 123 bytes from file Logs/20161111T044527/Express0261.lzma
2016-11-11T16:04:08.249Z,1478880248.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:08.636Z,1478880248.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:08.993Z,1478880248.993 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0261.lzma.bak
2016-11-11T16:04:08.993Z,1478880248.993 [DataOverHttps](INFO): SBD MOMSN=4555556
2016-11-11T16:04:09.053Z,1478880249.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:10.399Z,1478880250.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:10.412Z,1478880250.412 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T16:04:10.412Z,1478880250.412 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T16:04:10.412Z,1478880250.412 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T16:04:10.532Z,1478880250.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:13.865Z,1478880253.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:13.990Z,1478880253.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:14.376Z,1478880254.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:14.825Z,1478880254.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:15.171Z,1478880255.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:15.577Z,1478880255.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:15.990Z,1478880255.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:16.378Z,1478880256.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:16.811Z,1478880256.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:17.201Z,1478880257.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:17.580Z,1478880257.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:17.987Z,1478880257.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:18.394Z,1478880258.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:18.785Z,1478880258.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:19.169Z,1478880259.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:19.567Z,1478880259.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:19.969Z,1478880259.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:20.383Z,1478880260.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:20.785Z,1478880260.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:21.176Z,1478880261.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:21.589Z,1478880261.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:21.992Z,1478880261.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:22.369Z,1478880262.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:22.771Z,1478880262.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:23.172Z,1478880263.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:23.571Z,1478880263.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:23.977Z,1478880263.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:24.386Z,1478880264.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:24.781Z,1478880264.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:25.177Z,1478880265.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:25.585Z,1478880265.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:25.978Z,1478880265.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:26.385Z,1478880266.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:26.777Z,1478880266.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:27.170Z,1478880267.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:27.571Z,1478880267.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:27.980Z,1478880267.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:28.372Z,1478880268.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:28.779Z,1478880268.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:29.237Z,1478880269.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:29.577Z,1478880269.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:30.008Z,1478880270.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:30.369Z,1478880270.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:30.790Z,1478880270.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:31.193Z,1478880271.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:31.573Z,1478880271.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:31.967Z,1478880271.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:32.381Z,1478880272.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:32.783Z,1478880272.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:33.189Z,1478880273.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:33.576Z,1478880273.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:33.977Z,1478880273.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:34.376Z,1478880274.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:34.799Z,1478880274.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:35.169Z,1478880275.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:35.576Z,1478880275.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:35.975Z,1478880275.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:36.377Z,1478880276.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:36.768Z,1478880276.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:37.164Z,1478880277.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:37.572Z,1478880277.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:37.966Z,1478880277.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:38.368Z,1478880278.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:38.829Z,1478880278.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:39.172Z,1478880279.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:39.568Z,1478880279.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:39.970Z,1478880279.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:40.373Z,1478880280.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:40.768Z,1478880280.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:41.170Z,1478880281.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:41.578Z,1478880281.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:41.990Z,1478880281.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:42.401Z,1478880282.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:42.809Z,1478880282.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:43.170Z,1478880283.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:43.594Z,1478880283.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:43.970Z,1478880283.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:44.402Z,1478880284.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:44.802Z,1478880284.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:45.168Z,1478880285.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:45.570Z,1478880285.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:45.983Z,1478880285.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:46.372Z,1478880286.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:46.767Z,1478880286.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:47.177Z,1478880287.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:47.627Z,1478880287.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:47.989Z,1478880287.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:48.364Z,1478880288.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:48.769Z,1478880288.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:49.186Z,1478880289.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:49.568Z,1478880289.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:49.975Z,1478880289.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:50.384Z,1478880290.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:50.773Z,1478880290.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:51.171Z,1478880291.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:51.570Z,1478880291.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:51.975Z,1478880291.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:52.398Z,1478880292.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:52.767Z,1478880292.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:53.181Z,1478880293.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:53.581Z,1478880293.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:54.026Z,1478880294.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:54.376Z,1478880294.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:54.779Z,1478880294.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:55.181Z,1478880295.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:55.577Z,1478880295.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:56.009Z,1478880296.009 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:56.009Z,1478880296.010 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 205
2016-11-11T16:04:56.009Z,1478880296.010 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:04:56.020Z,1478880296.020 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:56.021Z,1478880296.021 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 205
2016-11-11T16:04:56.021Z,1478880296.021 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:04:56.023Z,1478880296.023 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:56.027Z,1478880296.027 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 205
2016-11-11T16:04:56.027Z,1478880296.027 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:04:56.081Z,1478880296.081 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:04:56.081Z,1478880296.081 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:04:56.081Z,1478880296.081 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:04:56.418Z,1478880296.418 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:04:56.418Z,1478880296.418 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 205
2016-11-11T16:04:56.419Z,1478880296.419 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:04:56.419Z,1478880296.419 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 205
2016-11-11T16:04:56.419Z,1478880296.420 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:04:56.420Z,1478880296.420 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 205
2016-11-11T16:04:56.800Z,1478880296.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:04:56.800Z,1478880296.800 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:04:56.801Z,1478880296.801 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:04:56.818Z,1478880296.818 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:04:56.818Z,1478880296.818 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:04:56.819Z,1478880296.819 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:04:56.819Z,1478880296.819 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:04:56.820Z,1478880296.820 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:04:56.820Z,1478880296.820 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:04:57.174Z,1478880297.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:57.581Z,1478880297.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:58.015Z,1478880298.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:58.375Z,1478880298.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:58.813Z,1478880298.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:59.190Z,1478880299.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:59.573Z,1478880299.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:04:59.971Z,1478880299.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:00.373Z,1478880300.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:00.792Z,1478880300.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:01.187Z,1478880301.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:01.591Z,1478880301.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:02.018Z,1478880302.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:02.394Z,1478880302.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:02.768Z,1478880302.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:03.168Z,1478880303.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:03.573Z,1478880303.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:04.035Z,1478880304.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:04.376Z,1478880304.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:04.781Z,1478880304.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:05.176Z,1478880305.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:05.578Z,1478880305.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:06.026Z,1478880306.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:06.380Z,1478880306.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:06.784Z,1478880306.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:07.181Z,1478880307.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:07.580Z,1478880307.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:08.058Z,1478880308.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:08.366Z,1478880308.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:08.777Z,1478880308.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:09.174Z,1478880309.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:09.590Z,1478880309.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:09.975Z,1478880309.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:10.389Z,1478880310.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:10.769Z,1478880310.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:11.193Z,1478880311.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:14.805Z,1478880314.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:14.937Z,1478880314.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:15.313Z,1478880315.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:15.741Z,1478880315.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:16.117Z,1478880316.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:16.537Z,1478880316.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:16.923Z,1478880316.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:17.320Z,1478880317.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:17.715Z,1478880317.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:18.098Z,1478880318.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:18.527Z,1478880318.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:18.899Z,1478880318.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:19.301Z,1478880319.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:19.705Z,1478880319.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:20.110Z,1478880320.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:20.506Z,1478880320.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:20.909Z,1478880320.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:21.309Z,1478880321.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:21.705Z,1478880321.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:22.106Z,1478880322.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:22.510Z,1478880322.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:22.907Z,1478880322.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:23.309Z,1478880323.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:23.724Z,1478880323.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:24.136Z,1478880324.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:24.525Z,1478880324.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:24.944Z,1478880324.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:25.333Z,1478880325.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:25.724Z,1478880325.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:26.122Z,1478880326.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:26.530Z,1478880326.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:26.917Z,1478880326.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:27.318Z,1478880327.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:27.746Z,1478880327.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:28.117Z,1478880328.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:28.528Z,1478880328.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:28.960Z,1478880328.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:29.342Z,1478880329.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:29.719Z,1478880329.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:30.129Z,1478880330.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:30.565Z,1478880330.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:30.911Z,1478880330.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:31.345Z,1478880331.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:31.745Z,1478880331.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:32.110Z,1478880332.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:32.516Z,1478880332.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:32.915Z,1478880332.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:33.306Z,1478880333.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:33.707Z,1478880333.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:34.106Z,1478880334.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:34.506Z,1478880334.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:34.906Z,1478880334.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:35.306Z,1478880335.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:35.706Z,1478880335.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:36.116Z,1478880336.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:36.515Z,1478880336.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:36.916Z,1478880336.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:37.313Z,1478880337.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:37.715Z,1478880337.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:38.105Z,1478880338.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:38.504Z,1478880338.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:38.905Z,1478880338.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:39.317Z,1478880339.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:39.713Z,1478880339.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:40.121Z,1478880340.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:40.516Z,1478880340.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:40.916Z,1478880340.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:41.319Z,1478880341.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:41.752Z,1478880341.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:42.125Z,1478880342.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:42.513Z,1478880342.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:42.953Z,1478880342.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:43.307Z,1478880343.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:43.757Z,1478880343.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:44.109Z,1478880344.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:44.549Z,1478880344.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:44.921Z,1478880344.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:45.361Z,1478880345.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:45.729Z,1478880345.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:46.124Z,1478880346.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:46.533Z,1478880346.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:46.946Z,1478880346.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:47.313Z,1478880347.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:47.709Z,1478880347.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:48.110Z,1478880348.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:48.509Z,1478880348.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:48.913Z,1478880348.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:49.312Z,1478880349.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:49.705Z,1478880349.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:50.109Z,1478880350.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:50.511Z,1478880350.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:50.906Z,1478880350.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:51.306Z,1478880351.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:51.711Z,1478880351.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:52.107Z,1478880352.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:52.517Z,1478880352.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:52.910Z,1478880352.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:53.314Z,1478880353.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:53.717Z,1478880353.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:54.120Z,1478880354.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:54.516Z,1478880354.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:54.910Z,1478880354.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:55.316Z,1478880355.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:55.721Z,1478880355.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:56.137Z,1478880356.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:56.521Z,1478880356.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:56.898Z,1478880356.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:57.302Z,1478880357.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:57.737Z,1478880357.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:58.149Z,1478880358.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:58.549Z,1478880358.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:58.918Z,1478880358.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:59.352Z,1478880359.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:05:59.753Z,1478880359.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:00.114Z,1478880360.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:00.513Z,1478880360.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:00.924Z,1478880360.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:01.320Z,1478880361.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:01.761Z,1478880361.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:02.121Z,1478880362.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:02.521Z,1478880362.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:02.924Z,1478880362.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:03.369Z,1478880363.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:03.719Z,1478880363.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:04.123Z,1478880364.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:04.521Z,1478880364.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:04.905Z,1478880364.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:04.942Z,1478880364.942 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T16:06:05.313Z,1478880365.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:05.709Z,1478880365.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:06.106Z,1478880366.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:06.513Z,1478880366.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:06.913Z,1478880366.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:07.309Z,1478880367.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:07.708Z,1478880367.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:08.116Z,1478880368.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:08.508Z,1478880368.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:08.914Z,1478880368.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:09.321Z,1478880369.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:09.721Z,1478880369.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:10.108Z,1478880370.108 [BPC1](ERROR): Failed to parse message.
2016-11-11T16:06:10.108Z,1478880370.108 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T16:06:10.108Z,1478880370.108 [BPC1] Data Fault, FailCount= 1
2016-11-11T16:06:10.108Z,1478880370.108 [BPC1](ERROR): Data Fault
2016-11-11T16:06:10.130Z,1478880370.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:10.170Z,1478880370.171 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T16:06:10.498Z,1478880370.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:10.902Z,1478880370.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:11.303Z,1478880371.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:11.350Z,1478880371.351 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:06:11.351Z,1478880371.351 [BPC1] No Fault, FailCount= 1
2016-11-11T16:06:14.953Z,1478880374.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:15.065Z,1478880375.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:15.493Z,1478880375.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:15.938Z,1478880375.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:16.257Z,1478880376.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:16.659Z,1478880376.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:17.069Z,1478880377.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:17.469Z,1478880377.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:17.919Z,1478880377.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:18.253Z,1478880378.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:18.654Z,1478880378.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:19.061Z,1478880379.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:19.469Z,1478880379.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:19.856Z,1478880379.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:20.265Z,1478880380.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:20.667Z,1478880380.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:21.061Z,1478880381.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:21.461Z,1478880381.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:21.869Z,1478880381.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:22.269Z,1478880382.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:22.668Z,1478880382.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:23.073Z,1478880383.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:23.464Z,1478880383.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:23.854Z,1478880383.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:24.253Z,1478880384.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:24.658Z,1478880384.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:25.066Z,1478880385.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:25.461Z,1478880385.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:25.926Z,1478880385.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:26.289Z,1478880386.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:26.674Z,1478880386.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:27.056Z,1478880387.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:27.506Z,1478880387.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:27.946Z,1478880387.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:28.299Z,1478880388.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:28.661Z,1478880388.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:29.100Z,1478880389.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:29.500Z,1478880389.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:29.924Z,1478880389.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:30.268Z,1478880390.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:30.676Z,1478880390.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:31.062Z,1478880391.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:31.472Z,1478880391.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:31.925Z,1478880391.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:32.256Z,1478880392.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:32.661Z,1478880392.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:33.059Z,1478880393.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:33.454Z,1478880393.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:33.865Z,1478880393.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:34.274Z,1478880394.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:34.669Z,1478880394.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:35.069Z,1478880395.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:35.468Z,1478880395.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:35.868Z,1478880395.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:36.268Z,1478880396.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:36.654Z,1478880396.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:37.055Z,1478880397.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:37.461Z,1478880397.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:37.859Z,1478880397.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:38.258Z,1478880398.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:38.668Z,1478880398.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:39.068Z,1478880399.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:39.465Z,1478880399.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:39.910Z,1478880399.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:40.285Z,1478880400.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:40.656Z,1478880400.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:41.101Z,1478880401.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:41.455Z,1478880401.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:41.905Z,1478880401.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:42.282Z,1478880402.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:42.658Z,1478880402.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:43.082Z,1478880403.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:43.482Z,1478880403.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:43.895Z,1478880403.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:44.268Z,1478880404.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:44.668Z,1478880404.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:45.069Z,1478880405.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:45.467Z,1478880405.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:45.898Z,1478880405.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:46.257Z,1478880406.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:46.685Z,1478880406.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:47.051Z,1478880407.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:47.456Z,1478880407.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:47.861Z,1478880407.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:48.266Z,1478880408.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:48.665Z,1478880408.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:49.064Z,1478880409.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:49.457Z,1478880409.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:49.864Z,1478880409.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:50.357Z,1478880410.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:50.665Z,1478880410.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:51.065Z,1478880411.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:51.465Z,1478880411.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:51.864Z,1478880411.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:52.333Z,1478880412.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:52.653Z,1478880412.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:53.052Z,1478880413.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:53.452Z,1478880413.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:53.914Z,1478880413.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:54.261Z,1478880414.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:54.664Z,1478880414.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:55.074Z,1478880415.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:55.459Z,1478880415.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:55.878Z,1478880415.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:56.285Z,1478880416.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:56.653Z,1478880416.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:57.085Z,1478880417.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:57.486Z,1478880417.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:57.894Z,1478880417.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:58.258Z,1478880418.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:58.661Z,1478880418.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:59.061Z,1478880419.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:59.461Z,1478880419.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:06:59.902Z,1478880419.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:00.258Z,1478880420.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:00.659Z,1478880420.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:01.066Z,1478880421.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:01.467Z,1478880421.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:01.865Z,1478880421.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:02.269Z,1478880422.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:02.688Z,1478880422.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:03.048Z,1478880423.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:03.476Z,1478880423.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:03.877Z,1478880423.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:04.306Z,1478880424.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:04.656Z,1478880424.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:05.056Z,1478880425.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:05.460Z,1478880425.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:05.864Z,1478880425.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:06.321Z,1478880426.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:06.656Z,1478880426.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:07.066Z,1478880427.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:07.468Z,1478880427.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:07.870Z,1478880427.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:08.272Z,1478880428.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:08.684Z,1478880428.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:09.074Z,1478880429.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:09.490Z,1478880429.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:09.882Z,1478880429.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:10.262Z,1478880430.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:10.678Z,1478880430.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:11.081Z,1478880431.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:11.493Z,1478880431.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:17.949Z,1478880437.949 [BPC1](ERROR): Failed to receive battery data
2016-11-11T16:07:17.949Z,1478880437.949 [BPC1] Communications Fault, FailCount= 1
2016-11-11T16:07:17.949Z,1478880437.949 [BPC1](ERROR): Communications Fault
2016-11-11T16:07:17.957Z,1478880437.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:18.043Z,1478880438.043 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T16:07:18.141Z,1478880438.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:18.501Z,1478880438.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:18.946Z,1478880438.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:18.991Z,1478880438.991 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:07:18.991Z,1478880438.991 [BPC1] No Fault, FailCount= 1
2016-11-11T16:07:19.381Z,1478880439.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:19.729Z,1478880439.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:20.093Z,1478880440.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:20.512Z,1478880440.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:20.926Z,1478880440.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:21.297Z,1478880441.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:21.703Z,1478880441.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:22.107Z,1478880442.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:22.549Z,1478880442.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:22.893Z,1478880442.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:23.310Z,1478880443.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:23.704Z,1478880443.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:24.134Z,1478880444.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:24.501Z,1478880444.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:24.887Z,1478880444.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:25.303Z,1478880445.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:25.693Z,1478880445.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:26.096Z,1478880446.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:26.494Z,1478880446.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:26.898Z,1478880446.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:27.290Z,1478880447.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:27.694Z,1478880447.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:28.100Z,1478880448.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:28.498Z,1478880448.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:28.890Z,1478880448.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:29.301Z,1478880449.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:29.701Z,1478880449.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:30.097Z,1478880450.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:30.497Z,1478880450.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:30.894Z,1478880450.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:31.306Z,1478880451.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:31.718Z,1478880451.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:32.152Z,1478880452.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:32.504Z,1478880452.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:32.925Z,1478880452.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:33.301Z,1478880453.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:33.725Z,1478880453.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:34.117Z,1478880454.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:34.498Z,1478880454.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:34.901Z,1478880454.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:35.341Z,1478880455.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:35.738Z,1478880455.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:36.090Z,1478880456.090 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2016-11-11T16:07:36.117Z,1478880456.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:36.490Z,1478880456.490 [PNI_TCM](ERROR): CRC does not match. Expected:0x26561 got:0x49579
2016-11-11T16:07:36.510Z,1478880456.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:36.964Z,1478880456.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:37.352Z,1478880457.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:37.717Z,1478880457.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:38.085Z,1478880458.085 [PNI_TCM](ERROR): CRC does not match. Expected:0x59857 got:0x17002
2016-11-11T16:07:38.125Z,1478880458.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:38.513Z,1478880458.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:38.925Z,1478880458.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:39.349Z,1478880459.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:39.761Z,1478880459.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:40.114Z,1478880460.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:40.521Z,1478880460.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:40.953Z,1478880460.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:41.313Z,1478880461.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:41.750Z,1478880461.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:42.149Z,1478880462.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:42.522Z,1478880462.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:42.917Z,1478880462.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:43.309Z,1478880463.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:43.715Z,1478880463.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:44.094Z,1478880464.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:44.510Z,1478880464.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:44.906Z,1478880464.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:45.307Z,1478880465.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:45.706Z,1478880465.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:46.105Z,1478880466.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:46.545Z,1478880466.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:46.933Z,1478880466.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:47.321Z,1478880467.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:47.719Z,1478880467.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:48.133Z,1478880468.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:48.537Z,1478880468.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:48.921Z,1478880468.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:49.310Z,1478880469.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:49.773Z,1478880469.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:50.133Z,1478880470.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:50.522Z,1478880470.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:50.914Z,1478880470.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:51.329Z,1478880471.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:51.770Z,1478880471.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:52.149Z,1478880472.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:52.510Z,1478880472.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:52.918Z,1478880472.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:53.322Z,1478880473.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:53.767Z,1478880473.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:54.134Z,1478880474.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:54.517Z,1478880474.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:54.917Z,1478880474.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:55.324Z,1478880475.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:55.780Z,1478880475.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:56.143Z,1478880476.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:56.518Z,1478880476.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:56.934Z,1478880476.934 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:56.935Z,1478880476.935 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 206
2016-11-11T16:07:56.935Z,1478880476.935 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:07:56.978Z,1478880476.978 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:56.978Z,1478880476.978 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 206
2016-11-11T16:07:56.978Z,1478880476.978 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:07:56.980Z,1478880476.980 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:56.980Z,1478880476.980 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 206
2016-11-11T16:07:56.980Z,1478880476.980 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:07:57.058Z,1478880477.058 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:07:57.058Z,1478880477.058 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:07:57.058Z,1478880477.058 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:07:57.337Z,1478880477.337 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:07:57.337Z,1478880477.337 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 206
2016-11-11T16:07:57.337Z,1478880477.337 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:07:57.338Z,1478880477.338 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 206
2016-11-11T16:07:57.338Z,1478880477.338 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:07:57.338Z,1478880477.338 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 206
2016-11-11T16:07:57.732Z,1478880477.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:07:57.732Z,1478880477.732 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:07:57.733Z,1478880477.733 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:07:57.737Z,1478880477.737 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:07:57.738Z,1478880477.738 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:07:57.738Z,1478880477.738 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:07:57.738Z,1478880477.739 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:07:57.747Z,1478880477.747 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:07:57.748Z,1478880477.748 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:07:58.138Z,1478880478.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:58.508Z,1478880478.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:58.909Z,1478880478.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:59.305Z,1478880479.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:07:59.716Z,1478880479.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:00.122Z,1478880480.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:00.553Z,1478880480.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:00.901Z,1478880480.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:01.318Z,1478880481.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:01.733Z,1478880481.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:02.109Z,1478880482.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:02.525Z,1478880482.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:02.933Z,1478880482.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:03.297Z,1478880483.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:03.772Z,1478880483.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:04.108Z,1478880484.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:04.522Z,1478880484.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:04.893Z,1478880484.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:05.297Z,1478880485.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:05.772Z,1478880485.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:06.097Z,1478880486.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:06.497Z,1478880486.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:06.896Z,1478880486.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:07.299Z,1478880487.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:07.764Z,1478880487.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:08.101Z,1478880488.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:08.501Z,1478880488.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:08.966Z,1478880488.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:09.317Z,1478880489.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:09.763Z,1478880489.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:10.105Z,1478880490.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:10.513Z,1478880490.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:10.898Z,1478880490.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:11.290Z,1478880491.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:11.719Z,1478880491.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:15.345Z,1478880495.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:15.470Z,1478880495.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:15.866Z,1478880495.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:16.252Z,1478880496.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:16.677Z,1478880496.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:17.052Z,1478880497.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:17.465Z,1478880497.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:17.851Z,1478880497.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:18.257Z,1478880498.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:18.656Z,1478880498.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:19.058Z,1478880499.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:19.459Z,1478880499.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:19.858Z,1478880499.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:20.261Z,1478880500.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:20.638Z,1478880500.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:21.046Z,1478880501.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:21.445Z,1478880501.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:21.844Z,1478880501.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:22.245Z,1478880502.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:22.645Z,1478880502.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:23.045Z,1478880503.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:23.439Z,1478880503.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:23.840Z,1478880503.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:24.245Z,1478880504.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:24.640Z,1478880504.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:25.043Z,1478880505.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:25.453Z,1478880505.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:25.863Z,1478880505.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:26.218Z,1478880506.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:08:26.253Z,1478880506.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:26.632Z,1478880506.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:27.014Z,1478880507.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:08:27.037Z,1478880507.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:27.441Z,1478880507.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:27.840Z,1478880507.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:28.239Z,1478880508.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:28.643Z,1478880508.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:29.090Z,1478880509.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:29.454Z,1478880509.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:29.849Z,1478880509.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:30.287Z,1478880510.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:30.642Z,1478880510.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:31.070Z,1478880511.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:31.466Z,1478880511.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:31.849Z,1478880511.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:32.248Z,1478880512.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:32.652Z,1478880512.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:33.049Z,1478880513.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:33.451Z,1478880513.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:33.857Z,1478880513.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:34.254Z,1478880514.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:34.659Z,1478880514.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:35.060Z,1478880515.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:35.457Z,1478880515.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:35.837Z,1478880515.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:36.235Z,1478880516.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:36.636Z,1478880516.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:37.037Z,1478880517.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:37.445Z,1478880517.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:37.847Z,1478880517.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:38.246Z,1478880518.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:38.653Z,1478880518.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:39.046Z,1478880519.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:39.448Z,1478880519.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:39.846Z,1478880519.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:40.250Z,1478880520.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:40.647Z,1478880520.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:40.952Z,1478880520.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:08:41.053Z,1478880521.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:41.448Z,1478880521.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:41.748Z,1478880521.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:08:41.853Z,1478880521.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:42.257Z,1478880522.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:42.656Z,1478880522.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:43.037Z,1478880523.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:43.493Z,1478880523.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:43.845Z,1478880523.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:44.277Z,1478880524.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:44.645Z,1478880524.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:45.077Z,1478880525.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:45.475Z,1478880525.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:45.839Z,1478880525.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:46.244Z,1478880526.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:46.651Z,1478880526.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:47.045Z,1478880527.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:47.442Z,1478880527.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:47.849Z,1478880527.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:48.249Z,1478880528.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:48.642Z,1478880528.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:49.053Z,1478880529.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:49.442Z,1478880529.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:49.848Z,1478880529.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:50.247Z,1478880530.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:50.651Z,1478880530.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:51.042Z,1478880531.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:51.448Z,1478880531.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:51.841Z,1478880531.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:52.242Z,1478880532.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:52.643Z,1478880532.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:53.048Z,1478880533.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:53.445Z,1478880533.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:53.849Z,1478880533.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:54.249Z,1478880534.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:54.646Z,1478880534.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:55.058Z,1478880535.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:55.460Z,1478880535.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:55.855Z,1478880535.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:56.256Z,1478880536.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:56.625Z,1478880536.625 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T16:08:56.625Z,1478880536.625 [BPC1] Data Fault, FailCount= 1
2016-11-11T16:08:56.626Z,1478880536.625 [BPC1](ERROR): Data Fault
2016-11-11T16:08:56.677Z,1478880536.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:56.705Z,1478880536.705 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T16:08:57.036Z,1478880537.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:57.437Z,1478880537.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:57.837Z,1478880537.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:57.895Z,1478880537.895 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:08:57.895Z,1478880537.895 [BPC1] No Fault, FailCount= 1
2016-11-11T16:08:58.309Z,1478880538.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:58.643Z,1478880538.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:59.075Z,1478880539.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:59.438Z,1478880539.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:08:59.849Z,1478880539.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:00.249Z,1478880540.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:00.639Z,1478880540.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:01.049Z,1478880541.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:01.445Z,1478880541.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:01.840Z,1478880541.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:02.248Z,1478880542.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:02.650Z,1478880542.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:03.040Z,1478880543.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:03.449Z,1478880543.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:03.853Z,1478880543.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:04.242Z,1478880544.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:04.649Z,1478880544.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:05.045Z,1478880545.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:05.441Z,1478880545.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:05.847Z,1478880545.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:06.249Z,1478880546.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:06.657Z,1478880546.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:07.032Z,1478880547.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:07.437Z,1478880547.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:07.837Z,1478880547.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:08.240Z,1478880548.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:08.642Z,1478880548.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:09.043Z,1478880549.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:09.447Z,1478880549.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:09.839Z,1478880549.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:10.244Z,1478880550.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:10.643Z,1478880550.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:10.652Z,1478880550.652 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T16:09:10.652Z,1478880550.652 [Default:CheckIn:C.Wait] Stopped
2016-11-11T16:09:10.653Z,1478880550.653 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T16:09:10.653Z,1478880550.653 [Default:CheckIn:D] Running Loop=1
2016-11-11T16:09:11.109Z,1478880551.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:11.118Z,1478880551.118 [Default:CheckIn:D] Stopped
2016-11-11T16:09:11.118Z,1478880551.118 [Default:CheckIn:E] Running Loop=1
2016-11-11T16:09:11.432Z,1478880551.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:11.449Z,1478880551.449 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 679.163477 min 
2016-11-11T16:09:11.450Z,1478880551.450 [Default:CheckIn:E] Stopped
2016-11-11T16:09:11.450Z,1478880551.450 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T16:09:11.450Z,1478880551.450 [Default:CheckIn] Stopped
2016-11-11T16:09:11.450Z,1478880551.450 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T16:09:11.450Z,1478880551.450 [Default:CheckIn](INFO): Running loop #66
2016-11-11T16:09:11.450Z,1478880551.450 [Default:CheckIn] Running Loop=66
2016-11-11T16:09:11.450Z,1478880551.450 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T16:09:11.451Z,1478880551.451 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T16:09:11.869Z,1478880551.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:15.334Z,1478880555.334 [NAL9602](INFO): Powering up
2016-11-11T16:09:15.385Z,1478880555.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:15.537Z,1478880555.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:15.941Z,1478880555.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:16.291Z,1478880556.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:16.695Z,1478880556.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:17.101Z,1478880557.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:17.495Z,1478880557.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:17.909Z,1478880557.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:18.301Z,1478880558.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:18.702Z,1478880558.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:19.102Z,1478880559.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:19.504Z,1478880559.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:19.908Z,1478880559.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:20.300Z,1478880560.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:20.714Z,1478880560.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:21.115Z,1478880561.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:21.513Z,1478880561.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:21.915Z,1478880561.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:22.293Z,1478880562.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:22.696Z,1478880562.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:23.093Z,1478880563.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:23.500Z,1478880563.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:23.898Z,1478880563.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:24.301Z,1478880564.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:24.699Z,1478880564.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:25.097Z,1478880565.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:25.506Z,1478880565.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:25.910Z,1478880565.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:26.257Z,1478880566.257 [NAL9602](INFO): NAL9602 initialized
2016-11-11T16:09:26.305Z,1478880566.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:26.711Z,1478880566.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:27.057Z,1478880567.057 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T16:09:27.057Z,1478880567.057 [NAL9602] Data Fault, FailCount= 1
2016-11-11T16:09:27.057Z,1478880567.057 [NAL9602](ERROR): Data Fault
2016-11-11T16:09:27.114Z,1478880567.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:27.163Z,1478880567.163 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T16:09:27.461Z,1478880567.461 [NAL9602](INFO): Powering down
2016-11-11T16:09:27.521Z,1478880567.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:27.897Z,1478880567.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:28.353Z,1478880568.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:28.390Z,1478880568.390 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T16:09:28.390Z,1478880568.390 [NAL9602] No Fault, FailCount= 1
2016-11-11T16:09:28.696Z,1478880568.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:29.131Z,1478880569.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:29.497Z,1478880569.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:29.921Z,1478880569.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:30.338Z,1478880570.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:30.689Z,1478880570.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:31.093Z,1478880571.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:31.501Z,1478880571.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:31.897Z,1478880571.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:32.296Z,1478880572.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:32.657Z,1478880572.657 [NAL9602](INFO): Powering up NAL9602
2016-11-11T16:09:32.715Z,1478880572.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:33.100Z,1478880573.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:33.496Z,1478880573.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:33.904Z,1478880573.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:34.313Z,1478880574.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:34.709Z,1478880574.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:35.107Z,1478880575.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:35.508Z,1478880575.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:35.893Z,1478880575.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:36.296Z,1478880576.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:36.688Z,1478880576.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:37.094Z,1478880577.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:37.498Z,1478880577.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:37.899Z,1478880577.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:38.295Z,1478880578.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:38.703Z,1478880578.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:39.109Z,1478880579.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:39.504Z,1478880579.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:39.922Z,1478880579.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:40.315Z,1478880580.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:40.697Z,1478880580.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:41.108Z,1478880581.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:41.493Z,1478880581.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:41.907Z,1478880581.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:42.353Z,1478880582.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:42.757Z,1478880582.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:43.101Z,1478880583.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:43.571Z,1478880583.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:43.857Z,1478880583.857 [NAL9602](INFO): NAL9602 initialized
2016-11-11T16:09:43.917Z,1478880583.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:44.304Z,1478880584.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:44.734Z,1478880584.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:45.164Z,1478880585.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:45.570Z,1478880585.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:45.921Z,1478880585.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:46.320Z,1478880586.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:46.702Z,1478880586.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:47.129Z,1478880587.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:47.565Z,1478880587.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:47.910Z,1478880587.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:48.300Z,1478880588.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:48.707Z,1478880588.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:49.107Z,1478880589.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:49.514Z,1478880589.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:49.916Z,1478880589.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:50.312Z,1478880590.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:50.719Z,1478880590.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:51.114Z,1478880591.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:51.521Z,1478880591.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:51.925Z,1478880591.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:52.322Z,1478880592.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:52.721Z,1478880592.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:53.108Z,1478880593.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:53.486Z,1478880593.486 [PNI_TCM](ERROR): CRC does not match. Expected:0x57881 got:0x48744
2016-11-11T16:09:53.510Z,1478880593.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:53.908Z,1478880593.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:54.312Z,1478880594.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:54.711Z,1478880594.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:55.109Z,1478880595.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:55.575Z,1478880595.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:55.903Z,1478880595.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:56.304Z,1478880596.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:56.722Z,1478880596.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:57.165Z,1478880597.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:57.570Z,1478880597.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:57.937Z,1478880597.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:58.309Z,1478880598.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:58.737Z,1478880598.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:59.137Z,1478880599.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:59.532Z,1478880599.532 [PNI_TCM](ERROR): CRC does not match. Expected:0x61966 got:0x6978
2016-11-11T16:09:59.566Z,1478880599.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:09:59.908Z,1478880599.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:00.309Z,1478880600.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:00.711Z,1478880600.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:01.100Z,1478880601.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:01.568Z,1478880601.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:01.924Z,1478880601.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:02.305Z,1478880602.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:02.707Z,1478880602.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:03.105Z,1478880603.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:03.497Z,1478880603.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:03.909Z,1478880603.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:04.301Z,1478880604.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:04.704Z,1478880604.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:05.103Z,1478880605.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:05.503Z,1478880605.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:05.900Z,1478880605.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:06.313Z,1478880606.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:06.697Z,1478880606.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:07.122Z,1478880607.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:07.500Z,1478880607.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:07.897Z,1478880607.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:08.303Z,1478880608.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:08.702Z,1478880608.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:09.109Z,1478880609.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:09.569Z,1478880609.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:09.896Z,1478880609.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:10.299Z,1478880610.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:10.704Z,1478880610.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:11.141Z,1478880611.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:11.560Z,1478880611.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:11.917Z,1478880611.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:15.221Z,1478880615.221 [BPC1](ERROR): Failed to receive battery data
2016-11-11T16:10:15.221Z,1478880615.221 [BPC1] Communications Fault, FailCount= 1
2016-11-11T16:10:15.221Z,1478880615.221 [BPC1](ERROR): Communications Fault
2016-11-11T16:10:15.264Z,1478880615.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:15.308Z,1478880615.307 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T16:10:15.387Z,1478880615.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:15.767Z,1478880615.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:16.165Z,1478880616.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:16.184Z,1478880616.184 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:10:16.184Z,1478880616.184 [BPC1] No Fault, FailCount= 1
2016-11-11T16:10:16.621Z,1478880616.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:16.969Z,1478880616.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:17.390Z,1478880617.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:17.768Z,1478880617.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:18.177Z,1478880618.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:18.572Z,1478880618.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:18.972Z,1478880618.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:19.371Z,1478880619.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:19.774Z,1478880619.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:20.185Z,1478880620.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:20.579Z,1478880620.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:20.977Z,1478880620.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:21.357Z,1478880621.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:21.786Z,1478880621.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:22.169Z,1478880622.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:22.562Z,1478880622.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:22.973Z,1478880622.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:23.379Z,1478880623.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:23.775Z,1478880623.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:24.165Z,1478880624.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:24.578Z,1478880624.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:24.977Z,1478880624.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:25.357Z,1478880625.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:25.777Z,1478880625.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:26.157Z,1478880626.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:26.561Z,1478880626.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:26.962Z,1478880626.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:27.349Z,1478880627.349 [BPC1](ERROR): Failed to parse message.
2016-11-11T16:10:27.349Z,1478880627.349 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T16:10:27.350Z,1478880627.349 [BPC1] Data Fault, FailCount= 2
2016-11-11T16:10:27.350Z,1478880627.349 [BPC1](ERROR): Data Fault
2016-11-11T16:10:27.362Z,1478880627.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:27.412Z,1478880627.412 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T16:10:27.769Z,1478880627.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:28.173Z,1478880628.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:28.568Z,1478880628.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:28.588Z,1478880628.588 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:10:28.588Z,1478880628.588 [BPC1] No Fault, FailCount= 2
2016-11-11T16:10:29.014Z,1478880629.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:29.410Z,1478880629.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:29.777Z,1478880629.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:30.157Z,1478880630.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:30.557Z,1478880630.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:30.957Z,1478880630.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:31.366Z,1478880631.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:31.761Z,1478880631.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:32.190Z,1478880632.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:32.570Z,1478880632.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:32.963Z,1478880632.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:33.365Z,1478880633.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:33.770Z,1478880633.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:34.169Z,1478880634.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:34.573Z,1478880634.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:34.969Z,1478880634.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:35.368Z,1478880635.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:35.768Z,1478880635.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:36.178Z,1478880636.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:36.569Z,1478880636.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:36.968Z,1478880636.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:37.369Z,1478880637.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:37.780Z,1478880637.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:38.184Z,1478880638.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:38.576Z,1478880638.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:38.953Z,1478880638.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:39.357Z,1478880639.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:39.769Z,1478880639.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:40.201Z,1478880640.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:40.562Z,1478880640.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:41.007Z,1478880641.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:41.381Z,1478880641.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:41.798Z,1478880641.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:42.214Z,1478880642.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:42.584Z,1478880642.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:42.973Z,1478880642.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:43.361Z,1478880643.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:43.771Z,1478880643.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:44.165Z,1478880644.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:44.571Z,1478880644.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:44.965Z,1478880644.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:45.357Z,1478880645.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:45.785Z,1478880645.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:46.161Z,1478880646.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:46.567Z,1478880646.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:46.969Z,1478880646.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:47.361Z,1478880647.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:47.764Z,1478880647.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:48.161Z,1478880648.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:48.572Z,1478880648.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:48.962Z,1478880648.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:49.365Z,1478880649.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:49.775Z,1478880649.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:50.161Z,1478880650.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:50.569Z,1478880650.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:50.993Z,1478880650.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:51.375Z,1478880651.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:51.777Z,1478880651.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:52.176Z,1478880652.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:52.561Z,1478880652.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:53.009Z,1478880653.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:53.361Z,1478880653.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:53.770Z,1478880653.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:54.168Z,1478880654.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:54.598Z,1478880654.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:54.981Z,1478880654.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:55.369Z,1478880655.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:55.781Z,1478880655.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:56.176Z,1478880656.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:56.614Z,1478880656.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:57.010Z,1478880657.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:57.368Z,1478880657.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:57.774Z,1478880657.774 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:57.774Z,1478880657.774 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 207
2016-11-11T16:10:57.774Z,1478880657.774 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:10:57.789Z,1478880657.789 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:57.789Z,1478880657.789 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 207
2016-11-11T16:10:57.789Z,1478880657.789 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:10:57.796Z,1478880657.796 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:57.796Z,1478880657.796 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 207
2016-11-11T16:10:57.796Z,1478880657.796 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:10:57.826Z,1478880657.826 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:10:57.827Z,1478880657.827 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:10:57.831Z,1478880657.831 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:10:58.221Z,1478880658.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:10:58.221Z,1478880658.221 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 207
2016-11-11T16:10:58.222Z,1478880658.222 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:10:58.222Z,1478880658.222 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 207
2016-11-11T16:10:58.223Z,1478880658.223 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:10:58.223Z,1478880658.223 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 207
2016-11-11T16:10:58.562Z,1478880658.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:10:58.563Z,1478880658.563 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:10:58.563Z,1478880658.563 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:10:58.568Z,1478880658.568 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:10:58.568Z,1478880658.568 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:10:58.569Z,1478880658.569 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:10:58.569Z,1478880658.569 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:10:58.570Z,1478880658.570 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:10:58.570Z,1478880658.570 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:10:58.965Z,1478880658.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:59.367Z,1478880659.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:10:59.765Z,1478880659.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:00.164Z,1478880660.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:00.576Z,1478880660.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:00.965Z,1478880660.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:01.365Z,1478880661.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:01.772Z,1478880661.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:02.172Z,1478880662.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:02.567Z,1478880662.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:02.974Z,1478880662.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:03.362Z,1478880663.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:03.769Z,1478880663.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:04.167Z,1478880664.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:04.566Z,1478880664.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:04.926Z,1478880664.926 [NAL9602](INFO): SBD MO Status=2, MOMSN=351, MT Status=2, MTMSN=0
2016-11-11T16:11:04.926Z,1478880664.926 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T16:11:04.981Z,1478880664.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:05.444Z,1478880665.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:05.777Z,1478880665.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:06.180Z,1478880666.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:06.553Z,1478880666.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:06.979Z,1478880666.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:07.413Z,1478880667.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:07.816Z,1478880667.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:08.172Z,1478880668.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:08.570Z,1478880668.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:08.980Z,1478880668.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:09.457Z,1478880669.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:09.785Z,1478880669.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:10.185Z,1478880670.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:10.557Z,1478880670.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:10.990Z,1478880670.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:11.455Z,1478880671.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:11.769Z,1478880671.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:12.177Z,1478880672.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:15.590Z,1478880675.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:15.737Z,1478880675.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:16.097Z,1478880676.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:16.493Z,1478880676.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:16.877Z,1478880676.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:17.304Z,1478880677.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:17.688Z,1478880677.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:18.082Z,1478880678.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:18.488Z,1478880678.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:18.882Z,1478880678.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:19.287Z,1478880679.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:19.697Z,1478880679.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:20.097Z,1478880680.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:20.493Z,1478880680.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:20.901Z,1478880680.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:21.296Z,1478880681.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:21.688Z,1478880681.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:22.117Z,1478880682.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:22.487Z,1478880682.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:22.886Z,1478880682.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:23.328Z,1478880683.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:23.677Z,1478880683.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:24.109Z,1478880684.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:24.510Z,1478880684.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:24.895Z,1478880684.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:25.325Z,1478880685.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:25.721Z,1478880685.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:26.083Z,1478880686.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:26.494Z,1478880686.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:26.896Z,1478880686.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:27.325Z,1478880687.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:27.693Z,1478880687.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:28.101Z,1478880688.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:28.506Z,1478880688.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:28.921Z,1478880688.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:29.301Z,1478880689.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:29.687Z,1478880689.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:30.107Z,1478880690.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:30.484Z,1478880690.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:30.885Z,1478880690.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:31.286Z,1478880691.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:31.686Z,1478880691.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:32.093Z,1478880692.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:32.505Z,1478880692.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:32.892Z,1478880692.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:33.291Z,1478880693.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:33.687Z,1478880693.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:34.086Z,1478880694.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:34.487Z,1478880694.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:34.884Z,1478880694.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:35.284Z,1478880695.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:35.705Z,1478880695.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:36.125Z,1478880696.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:36.497Z,1478880696.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:36.903Z,1478880696.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:37.293Z,1478880697.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:37.721Z,1478880697.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:38.083Z,1478880698.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:38.526Z,1478880698.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:38.887Z,1478880698.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:39.309Z,1478880699.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:39.717Z,1478880699.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:40.115Z,1478880700.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:40.521Z,1478880700.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:40.900Z,1478880700.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:41.293Z,1478880701.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:41.699Z,1478880701.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:42.096Z,1478880702.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:42.498Z,1478880702.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:42.908Z,1478880702.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:43.274Z,1478880703.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:43.677Z,1478880703.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:44.074Z,1478880704.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:44.494Z,1478880704.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:44.898Z,1478880704.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:45.339Z,1478880705.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:45.717Z,1478880705.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:46.101Z,1478880706.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:46.500Z,1478880706.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:46.904Z,1478880706.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:47.301Z,1478880707.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:47.682Z,1478880707.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:48.087Z,1478880708.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:48.488Z,1478880708.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:48.891Z,1478880708.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:49.284Z,1478880709.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:49.720Z,1478880709.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:50.101Z,1478880710.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:50.513Z,1478880710.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:50.897Z,1478880710.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:51.299Z,1478880711.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:51.725Z,1478880711.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:52.087Z,1478880712.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:52.492Z,1478880712.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:52.932Z,1478880712.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:53.300Z,1478880713.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:53.730Z,1478880713.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:54.127Z,1478880714.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:54.500Z,1478880714.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:54.897Z,1478880714.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:55.286Z,1478880715.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:55.682Z,1478880715.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:56.094Z,1478880716.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:56.535Z,1478880716.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:56.905Z,1478880716.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:57.299Z,1478880717.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:57.700Z,1478880717.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:58.103Z,1478880718.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:58.507Z,1478880718.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:58.905Z,1478880718.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:59.300Z,1478880719.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:11:59.709Z,1478880719.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:00.104Z,1478880720.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:00.518Z,1478880720.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:00.905Z,1478880720.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:01.395Z,1478880721.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:01.721Z,1478880721.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:02.121Z,1478880722.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:02.493Z,1478880722.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:02.889Z,1478880722.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:03.384Z,1478880723.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:03.690Z,1478880723.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:04.101Z,1478880724.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:04.497Z,1478880724.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:04.921Z,1478880724.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:05.337Z,1478880725.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:05.703Z,1478880725.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:06.117Z,1478880726.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:06.516Z,1478880726.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:06.921Z,1478880726.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:07.348Z,1478880727.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:07.766Z,1478880727.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:08.137Z,1478880728.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:08.493Z,1478880728.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:08.894Z,1478880728.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:09.325Z,1478880729.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:09.714Z,1478880729.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:10.118Z,1478880730.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:10.484Z,1478880730.484 [PNI_TCM](ERROR): CRC does not match. Expected:0x35412 got:0x22027
2016-11-11T16:12:10.539Z,1478880730.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:10.918Z,1478880730.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:11.294Z,1478880731.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:11.724Z,1478880731.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:12.103Z,1478880732.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:12.498Z,1478880732.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:17.210Z,1478880737.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:17.416Z,1478880737.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:17.724Z,1478880737.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:18.148Z,1478880738.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:18.546Z,1478880738.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:18.990Z,1478880738.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:19.396Z,1478880739.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:19.734Z,1478880739.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:20.166Z,1478880740.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:20.544Z,1478880740.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:20.942Z,1478880740.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:21.352Z,1478880741.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:21.763Z,1478880741.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:22.125Z,1478880742.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:22.545Z,1478880742.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:22.936Z,1478880742.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:23.326Z,1478880743.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:23.738Z,1478880743.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:24.123Z,1478880744.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:24.513Z,1478880744.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:24.918Z,1478880744.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:25.317Z,1478880745.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:25.774Z,1478880745.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:26.110Z,1478880746.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:26.514Z,1478880746.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:26.901Z,1478880746.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:27.315Z,1478880747.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:27.793Z,1478880747.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:28.160Z,1478880748.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:28.542Z,1478880748.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:28.945Z,1478880748.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:29.377Z,1478880749.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:29.753Z,1478880749.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:30.173Z,1478880750.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:30.523Z,1478880750.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:30.914Z,1478880750.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:31.362Z,1478880751.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:31.732Z,1478880751.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:32.131Z,1478880752.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:32.533Z,1478880752.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:32.950Z,1478880752.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:33.379Z,1478880753.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:33.728Z,1478880753.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:34.138Z,1478880754.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:34.514Z,1478880754.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:34.967Z,1478880754.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:35.330Z,1478880755.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:35.745Z,1478880755.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:36.165Z,1478880756.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:36.516Z,1478880756.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:36.923Z,1478880756.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:37.313Z,1478880757.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:37.746Z,1478880757.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:38.110Z,1478880758.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:38.525Z,1478880758.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:38.918Z,1478880758.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:39.324Z,1478880759.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:39.796Z,1478880759.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:40.140Z,1478880760.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:40.538Z,1478880760.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:40.906Z,1478880760.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:41.345Z,1478880761.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:41.717Z,1478880761.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:42.119Z,1478880762.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:42.506Z,1478880762.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:42.910Z,1478880762.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:43.321Z,1478880763.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:43.712Z,1478880763.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:44.110Z,1478880764.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:44.524Z,1478880764.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:44.918Z,1478880764.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:45.315Z,1478880765.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:45.717Z,1478880765.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:46.116Z,1478880766.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:46.516Z,1478880766.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:46.921Z,1478880766.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:47.316Z,1478880767.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:47.701Z,1478880767.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:48.141Z,1478880768.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:48.566Z,1478880768.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:48.949Z,1478880768.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:49.326Z,1478880769.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:49.733Z,1478880769.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:50.137Z,1478880770.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:50.508Z,1478880770.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:50.900Z,1478880770.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:51.393Z,1478880771.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:51.709Z,1478880771.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:52.101Z,1478880772.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:52.529Z,1478880772.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:52.927Z,1478880772.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:53.327Z,1478880773.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:53.783Z,1478880773.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:54.110Z,1478880774.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:54.499Z,1478880774.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:54.910Z,1478880774.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:55.303Z,1478880775.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:55.789Z,1478880775.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:56.114Z,1478880776.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:56.510Z,1478880776.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:56.905Z,1478880776.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:57.333Z,1478880777.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:57.717Z,1478880777.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:58.122Z,1478880778.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:58.501Z,1478880778.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:58.901Z,1478880778.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:59.331Z,1478880779.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:12:59.709Z,1478880779.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:00.103Z,1478880780.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:00.503Z,1478880780.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:00.917Z,1478880780.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:01.323Z,1478880781.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:01.716Z,1478880781.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:02.161Z,1478880782.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:02.518Z,1478880782.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:02.929Z,1478880782.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:03.334Z,1478880783.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:03.733Z,1478880783.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:04.133Z,1478880784.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:04.501Z,1478880784.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:04.901Z,1478880784.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:05.361Z,1478880785.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:05.708Z,1478880785.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:06.109Z,1478880786.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:06.506Z,1478880786.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:06.909Z,1478880786.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:07.317Z,1478880787.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:07.761Z,1478880787.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:08.124Z,1478880788.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:08.513Z,1478880788.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:08.910Z,1478880788.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:09.313Z,1478880789.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:09.763Z,1478880789.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:10.102Z,1478880790.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:10.505Z,1478880790.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:10.904Z,1478880790.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:11.303Z,1478880791.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:11.670Z,1478880791.670 [NAL9602](INFO): SBD MO Status=2, MOMSN=351, MT Status=2, MTMSN=0
2016-11-11T16:13:11.670Z,1478880791.670 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T16:13:11.714Z,1478880791.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:12.114Z,1478880792.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:12.506Z,1478880792.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:16.026Z,1478880796.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:16.161Z,1478880796.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:16.519Z,1478880796.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:16.958Z,1478880796.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:17.326Z,1478880797.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:17.762Z,1478880797.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:18.162Z,1478880798.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:18.521Z,1478880798.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:18.934Z,1478880798.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:19.408Z,1478880799.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:19.725Z,1478880799.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:20.125Z,1478880800.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:20.525Z,1478880800.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:20.922Z,1478880800.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:21.329Z,1478880801.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:21.750Z,1478880801.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:22.132Z,1478880802.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:22.533Z,1478880802.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:22.929Z,1478880802.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:23.313Z,1478880803.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:23.729Z,1478880803.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:24.131Z,1478880804.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:24.528Z,1478880804.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:24.929Z,1478880804.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:25.332Z,1478880805.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:25.732Z,1478880805.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:26.131Z,1478880806.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:26.534Z,1478880806.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:26.913Z,1478880806.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:27.317Z,1478880807.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:27.721Z,1478880807.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:28.118Z,1478880808.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:28.525Z,1478880808.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:28.924Z,1478880808.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:29.326Z,1478880809.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:29.729Z,1478880809.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:30.184Z,1478880810.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:30.521Z,1478880810.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:30.962Z,1478880810.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:31.333Z,1478880811.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:31.753Z,1478880811.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:32.142Z,1478880812.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:32.486Z,1478880812.486 [NAL9602](INFO): SBD MO Status=2, MOMSN=351, MT Status=2, MTMSN=0
2016-11-11T16:13:32.486Z,1478880812.487 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T16:13:32.548Z,1478880812.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:32.934Z,1478880812.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:33.359Z,1478880813.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:33.702Z,1478880813.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:33.730Z,1478880813.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:34.097Z,1478880814.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:34.117Z,1478880814.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:34.501Z,1478880814.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:34.521Z,1478880814.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:34.901Z,1478880814.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:34.921Z,1478880814.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:35.301Z,1478880815.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:35.321Z,1478880815.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:35.706Z,1478880815.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:35.726Z,1478880815.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:36.104Z,1478880816.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:36.125Z,1478880816.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:36.500Z,1478880816.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:36.528Z,1478880816.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:36.918Z,1478880816.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:36.938Z,1478880816.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:37.319Z,1478880817.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:37.338Z,1478880817.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:37.698Z,1478880817.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:37.725Z,1478880817.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:38.101Z,1478880818.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:38.127Z,1478880818.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:38.498Z,1478880818.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:38.534Z,1478880818.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:38.906Z,1478880818.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:38.922Z,1478880818.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:39.304Z,1478880819.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:39.324Z,1478880819.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:39.701Z,1478880819.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:39.737Z,1478880819.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:40.119Z,1478880820.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:40.134Z,1478880820.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:40.520Z,1478880820.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:40.535Z,1478880820.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:40.897Z,1478880820.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:40.938Z,1478880820.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:41.310Z,1478880821.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:41.325Z,1478880821.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:41.701Z,1478880821.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:41.721Z,1478880821.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:42.122Z,1478880822.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:42.530Z,1478880822.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:42.930Z,1478880822.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:43.333Z,1478880823.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:43.737Z,1478880823.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:44.165Z,1478880824.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:44.517Z,1478880824.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:44.921Z,1478880824.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:45.371Z,1478880825.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:45.719Z,1478880825.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:46.146Z,1478880826.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:46.554Z,1478880826.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:46.919Z,1478880826.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:47.336Z,1478880827.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:47.720Z,1478880827.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:48.129Z,1478880828.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:48.536Z,1478880828.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:48.937Z,1478880828.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:49.325Z,1478880829.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:49.733Z,1478880829.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:50.121Z,1478880830.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:50.501Z,1478880830.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:50.516Z,1478880830.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:50.905Z,1478880830.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:50.925Z,1478880830.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:51.305Z,1478880831.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:51.325Z,1478880831.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:51.704Z,1478880831.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:51.719Z,1478880831.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:52.097Z,1478880832.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:52.129Z,1478880832.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:52.501Z,1478880832.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:52.526Z,1478880832.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:52.921Z,1478880832.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:52.941Z,1478880832.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:53.308Z,1478880833.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:53.335Z,1478880833.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:53.697Z,1478880833.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:53.717Z,1478880833.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:54.101Z,1478880834.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:54.121Z,1478880834.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:54.501Z,1478880834.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:54.521Z,1478880834.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:54.903Z,1478880834.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:54.918Z,1478880834.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:55.309Z,1478880835.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:55.329Z,1478880835.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:55.697Z,1478880835.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:55.729Z,1478880835.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:56.097Z,1478880836.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:56.129Z,1478880836.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:56.502Z,1478880836.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:56.534Z,1478880836.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:56.897Z,1478880836.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:56.934Z,1478880836.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:57.305Z,1478880837.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:57.341Z,1478880837.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:57.699Z,1478880837.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:57.715Z,1478880837.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:58.105Z,1478880838.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:58.154Z,1478880838.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:58.504Z,1478880838.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:58.520Z,1478880838.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:58.904Z,1478880838.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:58.951Z,1478880838.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:58.951Z,1478880838.951 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 208
2016-11-11T16:13:58.951Z,1478880838.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:13:58.973Z,1478880838.973 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:58.973Z,1478880838.973 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 208
2016-11-11T16:13:58.973Z,1478880838.973 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:13:58.975Z,1478880838.975 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:13:58.975Z,1478880838.975 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 208
2016-11-11T16:13:58.975Z,1478880838.976 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:13:59.006Z,1478880839.006 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:13:59.007Z,1478880839.007 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:13:59.007Z,1478880839.007 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:13:59.297Z,1478880839.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:59.346Z,1478880839.346 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:13:59.346Z,1478880839.346 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 208
2016-11-11T16:13:59.346Z,1478880839.346 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:13:59.347Z,1478880839.346 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 208
2016-11-11T16:13:59.355Z,1478880839.355 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:13:59.355Z,1478880839.355 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 208
2016-11-11T16:13:59.712Z,1478880839.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:13:59.727Z,1478880839.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:13:59.727Z,1478880839.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:13:59.728Z,1478880839.728 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:13:59.732Z,1478880839.732 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:13:59.733Z,1478880839.733 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:13:59.733Z,1478880839.733 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:13:59.734Z,1478880839.734 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:13:59.734Z,1478880839.734 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:13:59.734Z,1478880839.734 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:14:00.114Z,1478880840.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:14:00.154Z,1478880840.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:00.497Z,1478880840.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:14:00.533Z,1478880840.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:00.897Z,1478880840.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:14:00.949Z,1478880840.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:01.382Z,1478880841.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:01.739Z,1478880841.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:02.134Z,1478880842.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:02.533Z,1478880842.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:02.932Z,1478880842.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:03.332Z,1478880843.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:03.736Z,1478880843.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:04.132Z,1478880844.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:04.531Z,1478880844.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:04.934Z,1478880844.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:05.313Z,1478880845.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:05.717Z,1478880845.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:06.149Z,1478880846.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:06.543Z,1478880846.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:06.921Z,1478880846.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:07.329Z,1478880847.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:07.727Z,1478880847.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:08.124Z,1478880848.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:08.522Z,1478880848.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:08.929Z,1478880848.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:09.329Z,1478880849.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:09.733Z,1478880849.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:10.139Z,1478880850.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:10.541Z,1478880850.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:10.941Z,1478880850.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:11.352Z,1478880851.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:11.721Z,1478880851.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:11.731Z,1478880851.731 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T16:09:11.5Z
2016-11-11T16:14:11.731Z,1478880851.731 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T16:14:11.731Z,1478880851.731 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T16:14:12.125Z,1478880852.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:12.991Z,1478880852.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:16.356Z,1478880856.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:16.408Z,1478880856.408 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0264.lzma
2016-11-11T16:14:16.500Z,1478880856.500 [BPC1](ERROR): Failed to receive battery data
2016-11-11T16:14:16.500Z,1478880856.500 [BPC1] Communications Fault, FailCount= 1
2016-11-11T16:14:16.500Z,1478880856.500 [BPC1](ERROR): Communications Fault
2016-11-11T16:14:16.513Z,1478880856.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:16.553Z,1478880856.553 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T16:14:16.877Z,1478880856.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:17.209Z,1478880857.209 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0264.lzma.bak
2016-11-11T16:14:17.209Z,1478880857.209 [DataOverHttps](INFO): SBD MOMSN=4555559
2016-11-11T16:14:17.280Z,1478880857.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:18.524Z,1478880858.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:18.571Z,1478880858.570 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:14:18.571Z,1478880858.571 [BPC1] No Fault, FailCount= 1
2016-11-11T16:14:18.717Z,1478880858.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:22.193Z,1478880862.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:22.327Z,1478880862.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:22.718Z,1478880862.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:23.185Z,1478880863.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:23.498Z,1478880863.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:23.897Z,1478880863.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:27.542Z,1478880867.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:27.611Z,1478880867.611 [DataOverHttps](INFO): Sending 162 bytes from file Logs/20161111T044527/Express0265.lzma
2016-11-11T16:14:27.689Z,1478880867.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:28.061Z,1478880868.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:28.413Z,1478880868.413 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0265.lzma.bak
2016-11-11T16:14:28.414Z,1478880868.414 [DataOverHttps](INFO): SBD MOMSN=4555561
2016-11-11T16:14:28.489Z,1478880868.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:29.943Z,1478880869.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:29.961Z,1478880869.961 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T16:14:29.961Z,1478880869.961 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T16:14:29.961Z,1478880869.961 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T16:14:30.058Z,1478880870.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:33.426Z,1478880873.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:33.609Z,1478880873.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:33.941Z,1478880873.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:34.342Z,1478880874.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:34.773Z,1478880874.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:35.143Z,1478880875.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:35.578Z,1478880875.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:35.975Z,1478880875.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:36.349Z,1478880876.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:36.744Z,1478880876.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:37.157Z,1478880877.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:37.551Z,1478880877.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:37.953Z,1478880877.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:38.345Z,1478880878.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:38.749Z,1478880878.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:39.151Z,1478880879.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:39.553Z,1478880879.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:39.953Z,1478880879.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:40.354Z,1478880880.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:40.761Z,1478880880.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:41.160Z,1478880881.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:41.554Z,1478880881.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:41.961Z,1478880881.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:42.365Z,1478880882.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:42.738Z,1478880882.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:43.206Z,1478880883.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:43.546Z,1478880883.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:43.944Z,1478880883.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:44.350Z,1478880884.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:44.752Z,1478880884.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:45.161Z,1478880885.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:45.604Z,1478880885.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:45.949Z,1478880885.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:46.393Z,1478880886.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:46.705Z,1478880886.705 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T16:14:46.756Z,1478880886.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:47.147Z,1478880887.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:47.591Z,1478880887.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:47.969Z,1478880887.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:48.353Z,1478880888.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:48.793Z,1478880888.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:49.144Z,1478880889.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:49.591Z,1478880889.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:49.974Z,1478880889.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:50.352Z,1478880890.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:50.755Z,1478880890.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:51.154Z,1478880891.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:51.552Z,1478880891.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:51.955Z,1478880891.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:52.304Z,1478880892.304 [NAL9602](INFO): Powering down
2016-11-11T16:14:52.355Z,1478880892.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:52.761Z,1478880892.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:53.162Z,1478880893.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:53.541Z,1478880893.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:53.936Z,1478880893.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:54.342Z,1478880894.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:54.743Z,1478880894.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:55.155Z,1478880895.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:55.543Z,1478880895.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:55.949Z,1478880895.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:56.343Z,1478880896.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:56.752Z,1478880896.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:57.195Z,1478880897.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:57.563Z,1478880897.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:57.941Z,1478880897.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:58.339Z,1478880898.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:58.749Z,1478880898.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:59.149Z,1478880899.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:59.581Z,1478880899.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:14:59.951Z,1478880899.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:00.369Z,1478880900.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:00.752Z,1478880900.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:01.161Z,1478880901.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:01.573Z,1478880901.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:01.969Z,1478880901.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:02.344Z,1478880902.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:02.743Z,1478880902.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:03.178Z,1478880903.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:03.547Z,1478880903.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:03.981Z,1478880903.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:04.366Z,1478880904.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:04.753Z,1478880904.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:05.152Z,1478880905.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:05.554Z,1478880905.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:05.946Z,1478880905.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:06.352Z,1478880906.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:06.754Z,1478880906.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:07.151Z,1478880907.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:07.547Z,1478880907.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:07.954Z,1478880907.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:08.345Z,1478880908.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:08.771Z,1478880908.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:09.149Z,1478880909.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:09.545Z,1478880909.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:09.941Z,1478880909.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:10.340Z,1478880910.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:10.741Z,1478880910.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:11.178Z,1478880911.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:11.542Z,1478880911.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:11.945Z,1478880911.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:12.338Z,1478880912.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:12.745Z,1478880912.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:13.149Z,1478880913.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:13.541Z,1478880913.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:13.941Z,1478880913.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:14.345Z,1478880914.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:14.741Z,1478880914.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:15.154Z,1478880915.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:15.545Z,1478880915.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:15.945Z,1478880915.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:16.369Z,1478880916.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:16.749Z,1478880916.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:17.140Z,1478880917.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:17.570Z,1478880917.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:17.937Z,1478880917.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:18.429Z,1478880918.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:18.740Z,1478880918.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:19.173Z,1478880919.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:19.538Z,1478880919.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:19.940Z,1478880919.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:20.337Z,1478880920.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:20.740Z,1478880920.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:21.137Z,1478880921.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:21.541Z,1478880921.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:21.977Z,1478880921.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:22.340Z,1478880922.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:22.745Z,1478880922.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:23.149Z,1478880923.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:23.540Z,1478880923.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:23.936Z,1478880923.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:24.341Z,1478880924.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:24.736Z,1478880924.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:25.143Z,1478880925.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:25.541Z,1478880925.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:25.941Z,1478880925.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:26.340Z,1478880926.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:26.741Z,1478880926.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:27.140Z,1478880927.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:27.537Z,1478880927.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:27.945Z,1478880927.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:28.369Z,1478880928.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:28.743Z,1478880928.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:29.190Z,1478880929.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:29.593Z,1478880929.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:29.949Z,1478880929.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:30.357Z,1478880930.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:36.318Z,1478880936.318 [BPC1](ERROR): Failed to receive battery data
2016-11-11T16:15:36.319Z,1478880936.319 [BPC1] Communications Fault, FailCount= 1
2016-11-11T16:15:36.319Z,1478880936.319 [BPC1](ERROR): Communications Fault
2016-11-11T16:15:36.357Z,1478880936.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:36.397Z,1478880936.397 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T16:15:36.477Z,1478880936.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:36.863Z,1478880936.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:37.269Z,1478880937.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:37.313Z,1478880937.313 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:15:37.313Z,1478880937.313 [BPC1] No Fault, FailCount= 1
2016-11-11T16:15:37.709Z,1478880937.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:38.089Z,1478880938.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:38.380Z,1478880938.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:15:38.462Z,1478880938.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:38.857Z,1478880938.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:39.176Z,1478880939.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:15:39.260Z,1478880939.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:39.584Z,1478880939.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:15:39.662Z,1478880939.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:40.053Z,1478880940.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:40.380Z,1478880940.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:15:40.463Z,1478880940.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:40.856Z,1478880940.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:41.176Z,1478880941.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:15:41.261Z,1478880941.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:41.649Z,1478880941.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:41.832Z,1478880941.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:15:42.047Z,1478880942.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:42.452Z,1478880942.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:42.628Z,1478880942.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:15:42.849Z,1478880942.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:43.251Z,1478880943.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:43.425Z,1478880943.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:15:43.651Z,1478880943.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:43.848Z,1478880943.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:15:44.065Z,1478880944.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:44.451Z,1478880944.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:44.644Z,1478880944.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:15:44.856Z,1478880944.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:45.259Z,1478880945.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:45.364Z,1478880945.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:15:45.664Z,1478880945.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:46.060Z,1478880946.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:46.463Z,1478880946.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:46.865Z,1478880946.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:47.265Z,1478880947.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:47.674Z,1478880947.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:48.048Z,1478880948.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:48.449Z,1478880948.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:48.885Z,1478880948.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:49.264Z,1478880949.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:49.685Z,1478880949.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:50.065Z,1478880950.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:50.489Z,1478880950.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:50.848Z,1478880950.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:51.301Z,1478880951.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:51.653Z,1478880951.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:52.097Z,1478880952.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:52.460Z,1478880952.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:52.862Z,1478880952.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:53.263Z,1478880953.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:53.653Z,1478880953.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:54.064Z,1478880954.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:54.458Z,1478880954.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:54.863Z,1478880954.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:55.268Z,1478880955.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:55.660Z,1478880955.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:56.064Z,1478880956.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:56.456Z,1478880956.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:56.869Z,1478880956.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:57.249Z,1478880957.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:57.644Z,1478880957.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:58.049Z,1478880958.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:58.447Z,1478880958.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:58.851Z,1478880958.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:59.260Z,1478880959.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:15:59.655Z,1478880959.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:00.057Z,1478880960.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:00.462Z,1478880960.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:00.864Z,1478880960.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:01.255Z,1478880961.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:01.652Z,1478880961.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:02.057Z,1478880962.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:02.457Z,1478880962.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:02.885Z,1478880962.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:03.262Z,1478880963.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:03.649Z,1478880963.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:04.082Z,1478880964.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:04.449Z,1478880964.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:04.875Z,1478880964.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:04.972Z,1478880964.972 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T16:16:05.261Z,1478880965.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:05.683Z,1478880965.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:06.053Z,1478880966.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:06.492Z,1478880966.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:06.856Z,1478880966.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:07.257Z,1478880967.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:07.671Z,1478880967.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:08.053Z,1478880968.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:08.244Z,1478880968.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:16:08.465Z,1478880968.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:08.852Z,1478880968.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:09.040Z,1478880969.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:16:09.274Z,1478880969.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:09.673Z,1478880969.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:10.112Z,1478880970.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:10.472Z,1478880970.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:10.859Z,1478880970.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:11.251Z,1478880971.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:11.650Z,1478880971.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:12.050Z,1478880972.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:12.456Z,1478880972.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:12.861Z,1478880972.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:13.253Z,1478880973.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:13.659Z,1478880973.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:14.062Z,1478880974.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:14.457Z,1478880974.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:14.853Z,1478880974.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:15.265Z,1478880975.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:15.651Z,1478880975.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:16.045Z,1478880976.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:16.453Z,1478880976.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:16.933Z,1478880976.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:17.258Z,1478880977.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:17.673Z,1478880977.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:18.077Z,1478880978.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:18.460Z,1478880978.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:18.918Z,1478880978.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:19.273Z,1478880979.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:19.674Z,1478880979.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:20.077Z,1478880980.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:20.471Z,1478880980.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:20.870Z,1478880980.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:21.250Z,1478880981.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:21.448Z,1478880981.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:16:21.654Z,1478880981.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:22.057Z,1478880982.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:22.244Z,1478880982.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:16:22.468Z,1478880982.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:22.854Z,1478880982.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:23.254Z,1478880983.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:23.670Z,1478880983.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:24.070Z,1478880984.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:24.453Z,1478880984.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:24.855Z,1478880984.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:25.256Z,1478880985.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:25.674Z,1478880985.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:26.056Z,1478880986.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:26.453Z,1478880986.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:26.905Z,1478880986.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:27.273Z,1478880987.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:27.670Z,1478880987.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:28.064Z,1478880988.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:28.450Z,1478880988.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:28.926Z,1478880988.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:29.258Z,1478880989.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:29.662Z,1478880989.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:30.064Z,1478880990.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:30.461Z,1478880990.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:33.974Z,1478880993.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:34.089Z,1478880994.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:34.466Z,1478880994.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:34.898Z,1478880994.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:35.266Z,1478880995.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:35.697Z,1478880995.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:36.102Z,1478880996.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:36.466Z,1478880996.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:36.870Z,1478880996.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:37.274Z,1478880997.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:37.656Z,1478880997.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:38.061Z,1478880998.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:38.465Z,1478880998.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:38.862Z,1478880998.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:39.266Z,1478880999.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:39.663Z,1478880999.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:40.073Z,1478881000.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:40.468Z,1478881000.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:40.943Z,1478881000.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:41.264Z,1478881001.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:41.669Z,1478881001.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:42.071Z,1478881002.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:42.464Z,1478881002.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:42.917Z,1478881002.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:43.276Z,1478881003.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:43.676Z,1478881003.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:44.082Z,1478881004.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:44.461Z,1478881004.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:44.924Z,1478881004.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:45.265Z,1478881005.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:45.669Z,1478881005.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:46.065Z,1478881006.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:46.473Z,1478881006.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:46.938Z,1478881006.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:47.282Z,1478881007.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:47.661Z,1478881007.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:48.113Z,1478881008.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:48.464Z,1478881008.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:48.864Z,1478881008.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:49.294Z,1478881009.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:49.676Z,1478881009.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:50.079Z,1478881010.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:50.503Z,1478881010.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:50.863Z,1478881010.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:51.266Z,1478881011.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:51.677Z,1478881011.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:52.069Z,1478881012.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:52.472Z,1478881012.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:52.879Z,1478881012.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:53.266Z,1478881013.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:53.683Z,1478881013.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:54.081Z,1478881014.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:54.456Z,1478881014.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:54.921Z,1478881014.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:55.269Z,1478881015.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:55.663Z,1478881015.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:56.073Z,1478881016.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:56.469Z,1478881016.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:56.910Z,1478881016.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:57.273Z,1478881017.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:57.673Z,1478881017.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:58.069Z,1478881018.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:58.469Z,1478881018.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:58.924Z,1478881018.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:59.276Z,1478881019.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:16:59.665Z,1478881019.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:00.065Z,1478881020.065 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:00.065Z,1478881020.065 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 209
2016-11-11T16:17:00.065Z,1478881020.065 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:17:00.072Z,1478881020.072 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:00.072Z,1478881020.072 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 209
2016-11-11T16:17:00.072Z,1478881020.072 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:17:00.074Z,1478881020.074 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:00.074Z,1478881020.074 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 209
2016-11-11T16:17:00.074Z,1478881020.074 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:17:00.090Z,1478881020.090 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:17:00.090Z,1478881020.090 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:17:00.090Z,1478881020.090 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:17:00.490Z,1478881020.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:17:00.491Z,1478881020.490 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 209
2016-11-11T16:17:00.491Z,1478881020.491 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:17:00.491Z,1478881020.491 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 209
2016-11-11T16:17:00.492Z,1478881020.492 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:17:00.492Z,1478881020.492 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 209
2016-11-11T16:17:00.894Z,1478881020.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:17:00.895Z,1478881020.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:17:00.904Z,1478881020.904 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:17:00.916Z,1478881020.916 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:17:00.917Z,1478881020.917 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:17:00.917Z,1478881020.917 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:17:00.918Z,1478881020.918 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:17:00.918Z,1478881020.918 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:17:00.919Z,1478881020.918 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:17:01.269Z,1478881021.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:01.668Z,1478881021.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:02.078Z,1478881022.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:02.493Z,1478881022.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:02.927Z,1478881022.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:03.261Z,1478881023.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:03.661Z,1478881023.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:04.097Z,1478881024.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:04.469Z,1478881024.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:04.899Z,1478881024.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:05.357Z,1478881025.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:05.669Z,1478881025.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:06.062Z,1478881026.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:06.463Z,1478881026.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:06.872Z,1478881026.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:07.338Z,1478881027.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:07.663Z,1478881027.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:08.069Z,1478881028.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:08.524Z,1478881028.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:08.901Z,1478881028.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:09.298Z,1478881029.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:09.695Z,1478881029.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:10.087Z,1478881030.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:10.496Z,1478881030.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:10.910Z,1478881030.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:11.283Z,1478881031.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:11.669Z,1478881031.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:12.089Z,1478881032.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:12.482Z,1478881032.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:12.918Z,1478881032.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:13.271Z,1478881033.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:13.685Z,1478881033.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:14.091Z,1478881034.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:14.484Z,1478881034.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:14.902Z,1478881034.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:15.310Z,1478881035.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:15.676Z,1478881035.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:16.079Z,1478881036.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:16.472Z,1478881036.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:16.960Z,1478881036.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:17.301Z,1478881037.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:17.737Z,1478881037.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:18.084Z,1478881038.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:18.472Z,1478881038.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:18.916Z,1478881038.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:19.332Z,1478881039.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:19.701Z,1478881039.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:20.101Z,1478881040.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:20.473Z,1478881040.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:20.892Z,1478881040.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:21.322Z,1478881041.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:21.669Z,1478881041.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:22.083Z,1478881042.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:22.487Z,1478881042.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:22.942Z,1478881042.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:23.278Z,1478881043.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:23.681Z,1478881043.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:24.082Z,1478881044.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:24.485Z,1478881044.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:24.891Z,1478881044.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:25.281Z,1478881045.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:25.670Z,1478881045.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:26.077Z,1478881046.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:26.474Z,1478881046.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:26.884Z,1478881046.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:27.278Z,1478881047.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:27.657Z,1478881047.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:28.070Z,1478881048.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:28.465Z,1478881048.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:28.865Z,1478881048.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:29.269Z,1478881049.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:29.661Z,1478881049.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:30.061Z,1478881050.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:30.461Z,1478881050.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:33.797Z,1478881053.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:33.927Z,1478881053.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:34.268Z,1478881054.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:34.697Z,1478881054.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:35.073Z,1478881055.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:35.505Z,1478881055.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:35.894Z,1478881055.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:36.277Z,1478881056.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:36.664Z,1478881056.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:37.068Z,1478881057.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:37.469Z,1478881057.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:37.868Z,1478881057.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:38.269Z,1478881058.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:38.673Z,1478881058.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:39.064Z,1478881059.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:39.464Z,1478881059.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:39.873Z,1478881059.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:40.273Z,1478881060.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:40.717Z,1478881060.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:41.073Z,1478881061.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:41.468Z,1478881061.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:41.869Z,1478881061.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:42.273Z,1478881062.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:42.664Z,1478881062.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:43.069Z,1478881063.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:43.469Z,1478881063.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:43.873Z,1478881063.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:44.269Z,1478881064.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:44.669Z,1478881064.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:45.065Z,1478881065.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:45.469Z,1478881065.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:45.869Z,1478881065.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:46.268Z,1478881066.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:46.673Z,1478881066.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:47.069Z,1478881067.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:47.469Z,1478881067.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:47.910Z,1478881067.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:48.269Z,1478881068.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:48.692Z,1478881068.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:49.068Z,1478881069.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:49.570Z,1478881069.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:49.909Z,1478881069.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:50.310Z,1478881070.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:50.674Z,1478881070.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:51.094Z,1478881071.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:51.498Z,1478881071.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:51.896Z,1478881071.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:52.274Z,1478881072.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:52.687Z,1478881072.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:53.095Z,1478881073.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:53.493Z,1478881073.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:53.887Z,1478881073.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:54.297Z,1478881074.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:54.674Z,1478881074.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:55.077Z,1478881075.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:55.507Z,1478881075.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:55.873Z,1478881075.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:56.304Z,1478881076.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:56.674Z,1478881076.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:57.085Z,1478881077.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:57.495Z,1478881077.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:57.884Z,1478881077.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:58.281Z,1478881078.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:58.685Z,1478881078.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:59.095Z,1478881079.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:59.483Z,1478881079.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:17:59.889Z,1478881079.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:00.282Z,1478881080.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:00.696Z,1478881080.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:01.101Z,1478881081.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:01.486Z,1478881081.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:01.866Z,1478881081.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:02.321Z,1478881082.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:02.722Z,1478881082.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:03.085Z,1478881083.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:03.486Z,1478881083.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:03.897Z,1478881083.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:04.274Z,1478881084.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:04.744Z,1478881084.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:05.107Z,1478881085.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:05.495Z,1478881085.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:05.879Z,1478881085.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:06.277Z,1478881086.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:06.669Z,1478881086.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:07.087Z,1478881087.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:07.485Z,1478881087.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:07.885Z,1478881087.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:08.283Z,1478881088.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:08.679Z,1478881088.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:09.075Z,1478881089.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:09.473Z,1478881089.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:09.871Z,1478881089.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:10.279Z,1478881090.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:10.677Z,1478881090.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:11.081Z,1478881091.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:11.469Z,1478881091.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:11.879Z,1478881091.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:12.268Z,1478881092.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:12.669Z,1478881092.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:13.099Z,1478881093.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:13.472Z,1478881093.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:13.874Z,1478881093.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:14.305Z,1478881094.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:14.674Z,1478881094.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:15.075Z,1478881095.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:15.492Z,1478881095.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:15.888Z,1478881095.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:16.284Z,1478881096.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:16.713Z,1478881096.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:17.067Z,1478881097.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:17.521Z,1478881097.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:17.874Z,1478881097.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:18.272Z,1478881098.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:18.741Z,1478881098.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:19.086Z,1478881099.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:19.497Z,1478881099.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:19.888Z,1478881099.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:20.299Z,1478881100.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:20.713Z,1478881100.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:21.076Z,1478881101.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:21.474Z,1478881101.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:21.883Z,1478881101.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:22.285Z,1478881102.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:22.761Z,1478881102.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:23.084Z,1478881103.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:23.484Z,1478881103.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:23.882Z,1478881103.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:24.282Z,1478881104.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:24.747Z,1478881104.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:25.096Z,1478881105.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:25.487Z,1478881105.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:25.868Z,1478881105.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:26.273Z,1478881106.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:26.667Z,1478881106.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:27.092Z,1478881107.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:27.466Z,1478881107.466 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T16:18:27.504Z,1478881107.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:27.871Z,1478881107.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:28.276Z,1478881108.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:28.698Z,1478881108.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:29.064Z,1478881109.064 [PNI_TCM](ERROR): CRC does not match. Expected:0x60734 got:0x54301
2016-11-11T16:18:29.105Z,1478881109.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:29.481Z,1478881109.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:29.886Z,1478881109.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:30.290Z,1478881110.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:30.667Z,1478881110.667 [PNI_TCM](ERROR): CRC does not match. Expected:0x37405 got:0x32768
2016-11-11T16:18:30.694Z,1478881110.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:34.334Z,1478881114.334 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T16:18:34.334Z,1478881114.334 [BPC1] Data Fault, FailCount= 1
2016-11-11T16:18:34.334Z,1478881114.334 [BPC1](ERROR): Data Fault
2016-11-11T16:18:34.346Z,1478881114.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:34.387Z,1478881114.387 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T16:18:34.477Z,1478881114.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:34.854Z,1478881114.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:35.257Z,1478881115.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:35.276Z,1478881115.276 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:18:35.276Z,1478881115.276 [BPC1] No Fault, FailCount= 1
2016-11-11T16:18:35.717Z,1478881115.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:36.061Z,1478881116.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:36.478Z,1478881116.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:36.854Z,1478881116.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:37.242Z,1478881117.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:37.646Z,1478881117.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:38.050Z,1478881118.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:38.448Z,1478881118.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:38.861Z,1478881118.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:39.249Z,1478881119.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:39.649Z,1478881119.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:40.049Z,1478881120.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:40.455Z,1478881120.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:40.889Z,1478881120.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:41.253Z,1478881121.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:41.260Z,1478881121.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:18:41.652Z,1478881121.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:42.056Z,1478881122.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:18:42.058Z,1478881122.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:42.454Z,1478881122.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:42.858Z,1478881122.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:43.263Z,1478881123.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:43.660Z,1478881123.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:44.065Z,1478881124.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:44.464Z,1478881124.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:44.901Z,1478881124.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:45.285Z,1478881125.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:45.653Z,1478881125.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:46.061Z,1478881126.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:46.461Z,1478881126.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:46.860Z,1478881126.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:47.252Z,1478881127.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:47.669Z,1478881127.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:48.082Z,1478881128.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:48.489Z,1478881128.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:48.850Z,1478881128.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:49.290Z,1478881129.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:49.682Z,1478881129.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:50.101Z,1478881130.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:50.489Z,1478881130.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:50.853Z,1478881130.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:51.253Z,1478881131.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:51.657Z,1478881131.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:52.057Z,1478881132.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:52.461Z,1478881132.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:52.859Z,1478881132.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:53.264Z,1478881133.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:53.642Z,1478881133.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:54.071Z,1478881134.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:54.442Z,1478881134.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:54.870Z,1478881134.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:55.242Z,1478881135.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:55.653Z,1478881135.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:56.047Z,1478881136.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:56.449Z,1478881136.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:56.850Z,1478881136.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:57.249Z,1478881137.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:57.661Z,1478881137.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:58.057Z,1478881138.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:58.459Z,1478881138.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:58.857Z,1478881138.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:59.257Z,1478881139.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:18:59.660Z,1478881139.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:00.059Z,1478881140.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:00.465Z,1478881140.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:00.869Z,1478881140.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:01.285Z,1478881141.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:01.677Z,1478881141.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:02.049Z,1478881142.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:02.480Z,1478881142.480 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T16:19:02.480Z,1478881142.480 [BPC1] Data Fault, FailCount= 1
2016-11-11T16:19:02.480Z,1478881142.480 [BPC1](ERROR): Data Fault
2016-11-11T16:19:02.513Z,1478881142.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:02.563Z,1478881142.563 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T16:19:02.849Z,1478881142.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:03.248Z,1478881143.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:03.649Z,1478881143.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:03.700Z,1478881143.700 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:19:03.700Z,1478881143.700 [BPC1] No Fault, FailCount= 1
2016-11-11T16:19:04.113Z,1478881144.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:04.454Z,1478881144.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:04.893Z,1478881144.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:05.301Z,1478881145.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:05.648Z,1478881145.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:06.078Z,1478881146.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:06.465Z,1478881146.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:06.890Z,1478881146.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:07.265Z,1478881147.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:07.653Z,1478881147.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:08.054Z,1478881148.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:08.455Z,1478881148.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:08.865Z,1478881148.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:09.261Z,1478881149.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:09.660Z,1478881149.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:10.061Z,1478881150.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:10.454Z,1478881150.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:10.861Z,1478881150.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:11.242Z,1478881151.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:11.649Z,1478881151.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:12.061Z,1478881152.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:12.450Z,1478881152.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:12.851Z,1478881152.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:13.258Z,1478881153.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:13.654Z,1478881153.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:14.058Z,1478881154.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:14.460Z,1478881154.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:14.862Z,1478881154.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:15.258Z,1478881155.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:15.636Z,1478881155.635 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T16:19:15.636Z,1478881155.636 [BPC1] Data Fault, FailCount= 2
2016-11-11T16:19:15.636Z,1478881155.636 [BPC1](ERROR): Data Fault
2016-11-11T16:19:15.661Z,1478881155.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:15.705Z,1478881155.705 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T16:19:16.072Z,1478881156.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:16.442Z,1478881156.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:16.842Z,1478881156.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:16.882Z,1478881156.882 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:19:16.882Z,1478881156.882 [BPC1] No Fault, FailCount= 2
2016-11-11T16:19:17.302Z,1478881157.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:17.685Z,1478881157.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:18.086Z,1478881158.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:18.480Z,1478881158.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:18.874Z,1478881158.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:19.273Z,1478881159.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:19.678Z,1478881159.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:20.049Z,1478881160.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:20.457Z,1478881160.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:20.862Z,1478881160.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:21.258Z,1478881161.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:21.685Z,1478881161.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:22.057Z,1478881162.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:22.470Z,1478881162.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:22.876Z,1478881162.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:23.297Z,1478881163.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:23.656Z,1478881163.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:24.065Z,1478881164.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:24.471Z,1478881164.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:24.847Z,1478881164.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:25.250Z,1478881165.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:25.650Z,1478881165.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:26.049Z,1478881166.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:26.449Z,1478881166.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:26.862Z,1478881166.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:27.251Z,1478881167.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:27.660Z,1478881167.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:28.057Z,1478881168.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:28.461Z,1478881168.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:28.850Z,1478881168.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:29.262Z,1478881169.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:29.661Z,1478881169.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:30.106Z,1478881170.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:30.132Z,1478881170.132 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T16:19:30.132Z,1478881170.132 [Default:CheckIn:C.Wait] Stopped
2016-11-11T16:19:30.132Z,1478881170.132 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T16:19:30.132Z,1478881170.132 [Default:CheckIn:D] Running Loop=1
2016-11-11T16:19:30.491Z,1478881170.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:30.543Z,1478881170.543 [Default:CheckIn:D] Stopped
2016-11-11T16:19:30.543Z,1478881170.543 [Default:CheckIn:E] Running Loop=1
2016-11-11T16:19:30.886Z,1478881170.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:30.895Z,1478881170.895 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 689.487174 min 
2016-11-11T16:19:30.895Z,1478881170.895 [Default:CheckIn:E] Stopped
2016-11-11T16:19:30.895Z,1478881170.895 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T16:19:30.896Z,1478881170.895 [Default:CheckIn] Stopped
2016-11-11T16:19:30.896Z,1478881170.896 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T16:19:30.896Z,1478881170.896 [Default:CheckIn](INFO): Running loop #67
2016-11-11T16:19:30.896Z,1478881170.896 [Default:CheckIn] Running Loop=67
2016-11-11T16:19:30.896Z,1478881170.896 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T16:19:30.896Z,1478881170.896 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T16:19:34.191Z,1478881174.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:34.274Z,1478881174.274 [NAL9602](INFO): Powering up
2016-11-11T16:19:34.353Z,1478881174.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:34.721Z,1478881174.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:35.065Z,1478881175.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:35.464Z,1478881175.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:35.863Z,1478881175.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:36.292Z,1478881176.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:36.732Z,1478881176.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:37.083Z,1478881177.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:37.481Z,1478881177.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:37.856Z,1478881177.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:38.262Z,1478881178.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:38.669Z,1478881178.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:39.116Z,1478881179.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:39.474Z,1478881179.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:39.873Z,1478881179.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:40.266Z,1478881180.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:40.677Z,1478881180.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:41.138Z,1478881181.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:41.473Z,1478881181.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:41.873Z,1478881181.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:42.277Z,1478881182.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:42.663Z,1478881182.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:43.065Z,1478881183.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:43.464Z,1478881183.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:43.867Z,1478881183.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:44.273Z,1478881184.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:44.669Z,1478881184.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:45.076Z,1478881185.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:45.429Z,1478881185.429 [NAL9602](INFO): NAL9602 initialized
2016-11-11T16:19:45.474Z,1478881185.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:45.873Z,1478881185.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:46.225Z,1478881186.225 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T16:19:46.225Z,1478881186.225 [NAL9602] Data Fault, FailCount= 2
2016-11-11T16:19:46.225Z,1478881186.225 [NAL9602](ERROR): Data Fault
2016-11-11T16:19:46.282Z,1478881186.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:46.314Z,1478881186.314 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T16:19:46.629Z,1478881186.629 [NAL9602](INFO): Powering down
2016-11-11T16:19:46.697Z,1478881186.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:47.101Z,1478881187.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:47.462Z,1478881187.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:47.506Z,1478881187.506 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T16:19:47.506Z,1478881187.506 [NAL9602] No Fault, FailCount= 2
2016-11-11T16:19:47.867Z,1478881187.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:48.300Z,1478881188.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:48.670Z,1478881188.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:49.099Z,1478881189.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:49.503Z,1478881189.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:49.865Z,1478881189.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:50.263Z,1478881190.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:50.730Z,1478881190.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:51.069Z,1478881191.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:51.472Z,1478881191.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:51.825Z,1478881191.825 [NAL9602](INFO): Powering up NAL9602
2016-11-11T16:19:51.877Z,1478881191.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:52.272Z,1478881192.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:52.672Z,1478881192.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:53.122Z,1478881193.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:53.476Z,1478881193.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:53.875Z,1478881193.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:54.268Z,1478881194.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:54.701Z,1478881194.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:55.095Z,1478881195.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:55.474Z,1478881195.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:55.864Z,1478881195.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:56.270Z,1478881196.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:56.676Z,1478881196.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:57.081Z,1478881197.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:57.461Z,1478881197.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:57.865Z,1478881197.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:58.262Z,1478881198.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:58.668Z,1478881198.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:59.063Z,1478881199.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:59.467Z,1478881199.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:19:59.869Z,1478881199.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:00.274Z,1478881200.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:00.672Z,1478881200.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:01.073Z,1478881201.073 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:01.073Z,1478881201.073 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 210
2016-11-11T16:20:01.073Z,1478881201.073 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:20:01.080Z,1478881201.080 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:01.080Z,1478881201.080 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 210
2016-11-11T16:20:01.080Z,1478881201.080 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:20:01.082Z,1478881201.082 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:01.082Z,1478881201.082 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 210
2016-11-11T16:20:01.082Z,1478881201.082 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:20:01.128Z,1478881201.128 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:20:01.129Z,1478881201.129 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:20:01.129Z,1478881201.129 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:20:01.531Z,1478881201.531 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:20:01.531Z,1478881201.531 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 210
2016-11-11T16:20:01.532Z,1478881201.532 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:20:01.532Z,1478881201.532 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 210
2016-11-11T16:20:01.532Z,1478881201.532 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:20:01.532Z,1478881201.532 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 210
2016-11-11T16:20:01.860Z,1478881201.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:20:01.860Z,1478881201.860 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:20:01.861Z,1478881201.861 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:20:01.886Z,1478881201.886 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:20:01.886Z,1478881201.886 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:20:01.886Z,1478881201.886 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:20:01.891Z,1478881201.891 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:20:01.892Z,1478881201.892 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:20:01.892Z,1478881201.892 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:20:02.282Z,1478881202.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:02.689Z,1478881202.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:03.025Z,1478881203.025 [NAL9602](INFO): NAL9602 initialized
2016-11-11T16:20:03.089Z,1478881203.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:03.461Z,1478881203.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:03.906Z,1478881203.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:04.275Z,1478881204.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:04.725Z,1478881204.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:05.073Z,1478881205.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:05.469Z,1478881205.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:05.874Z,1478881205.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:06.285Z,1478881206.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:06.681Z,1478881206.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:07.096Z,1478881207.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:07.482Z,1478881207.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:07.881Z,1478881207.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:08.261Z,1478881208.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:08.665Z,1478881208.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:09.082Z,1478881209.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:09.469Z,1478881209.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:09.864Z,1478881209.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:10.279Z,1478881210.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:10.681Z,1478881210.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:11.078Z,1478881211.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:11.473Z,1478881211.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:11.872Z,1478881211.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:12.273Z,1478881212.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:12.673Z,1478881212.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:13.072Z,1478881213.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:13.473Z,1478881213.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:13.872Z,1478881213.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:14.277Z,1478881214.277 [BPC1](ERROR): Failed to parse message.
2016-11-11T16:20:14.277Z,1478881214.277 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T16:20:14.277Z,1478881214.277 [BPC1] Data Fault, FailCount= 1
2016-11-11T16:20:14.277Z,1478881214.277 [BPC1](ERROR): Data Fault
2016-11-11T16:20:14.298Z,1478881214.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:14.343Z,1478881214.342 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T16:20:14.688Z,1478881214.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:15.065Z,1478881215.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:15.465Z,1478881215.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:15.510Z,1478881215.510 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:20:15.510Z,1478881215.510 [BPC1] No Fault, FailCount= 1
2016-11-11T16:20:15.922Z,1478881215.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:16.297Z,1478881216.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:16.673Z,1478881216.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:17.063Z,1478881217.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:17.473Z,1478881217.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:17.868Z,1478881217.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:18.275Z,1478881218.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:18.711Z,1478881218.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:19.088Z,1478881219.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:19.477Z,1478881219.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:19.877Z,1478881219.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:20.277Z,1478881220.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:20.685Z,1478881220.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:21.079Z,1478881221.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:21.465Z,1478881221.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:21.865Z,1478881221.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:22.268Z,1478881222.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:22.669Z,1478881222.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:23.077Z,1478881223.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:23.476Z,1478881223.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:23.875Z,1478881223.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:24.282Z,1478881224.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:24.665Z,1478881224.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:25.074Z,1478881225.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:25.477Z,1478881225.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:25.876Z,1478881225.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:26.278Z,1478881226.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:26.676Z,1478881226.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:27.097Z,1478881227.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:27.489Z,1478881227.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:27.879Z,1478881227.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:28.278Z,1478881228.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:28.685Z,1478881228.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:29.090Z,1478881229.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:29.473Z,1478881229.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:29.905Z,1478881229.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:30.292Z,1478881230.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:30.689Z,1478881230.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:31.069Z,1478881231.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:34.409Z,1478881234.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:34.537Z,1478881234.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:34.854Z,1478881234.854 [NAL9602](INFO): SBD MO Status=2, MOMSN=351, MT Status=2, MTMSN=0
2016-11-11T16:20:34.854Z,1478881234.854 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T16:20:34.893Z,1478881234.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:35.293Z,1478881235.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:35.697Z,1478881235.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:36.090Z,1478881236.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:36.497Z,1478881236.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:36.870Z,1478881236.870 [PNI_TCM](ERROR): CRC does not match. Expected:0x41586 got:0x0
2016-11-11T16:20:36.897Z,1478881236.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:37.296Z,1478881237.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:37.704Z,1478881237.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:38.095Z,1478881238.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:38.530Z,1478881238.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:38.933Z,1478881238.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:39.314Z,1478881239.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:39.688Z,1478881239.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:40.101Z,1478881240.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:40.576Z,1478881240.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:40.921Z,1478881240.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:41.297Z,1478881241.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:41.689Z,1478881241.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:42.100Z,1478881242.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:42.583Z,1478881242.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:42.921Z,1478881242.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:43.279Z,1478881243.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:43.722Z,1478881243.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:44.093Z,1478881244.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:44.561Z,1478881244.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:44.922Z,1478881244.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:45.305Z,1478881245.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:45.697Z,1478881245.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:46.090Z,1478881246.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:46.492Z,1478881246.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:46.892Z,1478881246.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:47.285Z,1478881247.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:47.687Z,1478881247.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:48.090Z,1478881248.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:48.493Z,1478881248.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:48.886Z,1478881248.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:49.297Z,1478881249.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:49.693Z,1478881249.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:50.092Z,1478881250.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:50.489Z,1478881250.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:50.934Z,1478881250.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:51.285Z,1478881251.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:51.687Z,1478881251.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:52.085Z,1478881252.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:52.554Z,1478881252.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:52.893Z,1478881252.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:53.298Z,1478881253.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:53.697Z,1478881253.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:54.097Z,1478881254.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:54.541Z,1478881254.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:54.887Z,1478881254.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:55.296Z,1478881255.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:55.741Z,1478881255.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:56.113Z,1478881256.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:56.562Z,1478881256.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:56.885Z,1478881256.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:57.317Z,1478881257.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:57.689Z,1478881257.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:58.123Z,1478881258.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:58.530Z,1478881258.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:58.929Z,1478881258.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:59.329Z,1478881259.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:20:59.702Z,1478881259.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:00.093Z,1478881260.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:00.501Z,1478881260.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:00.903Z,1478881260.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:01.309Z,1478881261.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:01.690Z,1478881261.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:02.091Z,1478881262.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:02.485Z,1478881262.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:02.954Z,1478881262.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:03.292Z,1478881263.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:03.692Z,1478881263.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:04.096Z,1478881264.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:04.492Z,1478881264.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:04.850Z,1478881264.850 [NAL9602](INFO): SBD MO Status=2, MOMSN=351, MT Status=2, MTMSN=0
2016-11-11T16:21:04.850Z,1478881264.850 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T16:21:04.967Z,1478881264.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:05.308Z,1478881265.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:05.681Z,1478881265.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:06.084Z,1478881266.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:06.517Z,1478881266.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:06.889Z,1478881266.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:07.288Z,1478881267.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:07.693Z,1478881267.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:08.092Z,1478881268.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:08.512Z,1478881268.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:08.893Z,1478881268.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:09.301Z,1478881269.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:09.697Z,1478881269.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:10.120Z,1478881270.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:10.518Z,1478881270.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:10.897Z,1478881270.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:11.321Z,1478881271.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:11.691Z,1478881271.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:12.085Z,1478881272.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:12.549Z,1478881272.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:12.899Z,1478881272.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:13.338Z,1478881273.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:13.713Z,1478881273.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:14.096Z,1478881274.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:14.493Z,1478881274.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:14.893Z,1478881274.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:15.292Z,1478881275.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:15.696Z,1478881275.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:15.740Z,1478881275.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:21:16.095Z,1478881276.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:16.496Z,1478881276.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:16.536Z,1478881276.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:21:16.996Z,1478881276.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:17.280Z,1478881277.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:17.694Z,1478881277.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:18.101Z,1478881278.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:18.509Z,1478881278.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:18.932Z,1478881278.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:19.289Z,1478881279.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:19.684Z,1478881279.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:20.093Z,1478881280.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:20.508Z,1478881280.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:20.901Z,1478881280.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:21.293Z,1478881281.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:21.693Z,1478881281.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:22.050Z,1478881282.050 [NAL9602](INFO): SBD MO Status=2, MOMSN=351, MT Status=2, MTMSN=0
2016-11-11T16:21:22.050Z,1478881282.050 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T16:21:22.107Z,1478881282.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:22.536Z,1478881282.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:22.889Z,1478881282.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:23.289Z,1478881283.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:23.688Z,1478881283.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:24.093Z,1478881284.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:24.540Z,1478881284.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:24.901Z,1478881284.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:25.293Z,1478881285.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:25.698Z,1478881285.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:26.121Z,1478881286.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:26.519Z,1478881286.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:26.937Z,1478881286.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:27.285Z,1478881287.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:27.728Z,1478881287.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:28.120Z,1478881288.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:28.549Z,1478881288.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:28.900Z,1478881288.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:29.305Z,1478881289.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:29.706Z,1478881289.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:29.712Z,1478881289.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:21:30.125Z,1478881290.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:30.487Z,1478881290.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:30.508Z,1478881290.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:21:30.943Z,1478881290.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:31.285Z,1478881291.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:34.804Z,1478881294.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:34.925Z,1478881294.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:35.341Z,1478881295.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:35.741Z,1478881295.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:36.121Z,1478881296.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:36.525Z,1478881296.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:36.929Z,1478881296.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:37.329Z,1478881297.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:37.729Z,1478881297.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:38.137Z,1478881298.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:38.569Z,1478881298.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:38.929Z,1478881298.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:39.339Z,1478881299.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:39.731Z,1478881299.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:40.153Z,1478881300.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:40.534Z,1478881300.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:40.945Z,1478881300.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:41.329Z,1478881301.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:41.749Z,1478881301.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:42.113Z,1478881302.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:42.583Z,1478881302.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:42.913Z,1478881302.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:43.334Z,1478881303.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:43.747Z,1478881303.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:44.133Z,1478881304.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:44.525Z,1478881304.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:44.938Z,1478881304.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:45.333Z,1478881305.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:45.733Z,1478881305.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:46.129Z,1478881306.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:46.541Z,1478881306.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:46.972Z,1478881306.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:47.321Z,1478881307.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:47.719Z,1478881307.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:48.127Z,1478881308.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:48.531Z,1478881308.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:48.929Z,1478881308.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:49.322Z,1478881309.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:49.730Z,1478881309.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:50.125Z,1478881310.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:50.536Z,1478881310.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:50.925Z,1478881310.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:51.342Z,1478881311.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:51.735Z,1478881311.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:52.140Z,1478881312.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:52.532Z,1478881312.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:52.929Z,1478881312.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:53.360Z,1478881313.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:53.713Z,1478881313.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:54.112Z,1478881314.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:54.517Z,1478881314.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:54.957Z,1478881314.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:55.329Z,1478881315.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:55.758Z,1478881315.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:56.120Z,1478881316.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:56.558Z,1478881316.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:56.945Z,1478881316.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:57.334Z,1478881317.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:57.729Z,1478881317.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:58.137Z,1478881318.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:58.513Z,1478881318.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:58.912Z,1478881318.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:59.321Z,1478881319.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:21:59.720Z,1478881319.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:00.127Z,1478881320.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:00.533Z,1478881320.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:00.921Z,1478881320.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:01.331Z,1478881321.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:01.724Z,1478881321.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:02.125Z,1478881322.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:02.522Z,1478881322.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:02.924Z,1478881322.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:03.337Z,1478881323.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:03.733Z,1478881323.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:04.132Z,1478881324.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:04.550Z,1478881324.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:04.948Z,1478881324.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:05.344Z,1478881325.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:05.756Z,1478881325.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:06.150Z,1478881326.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:06.541Z,1478881326.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:06.953Z,1478881326.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:07.319Z,1478881327.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:07.770Z,1478881327.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:08.149Z,1478881328.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:08.550Z,1478881328.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:08.982Z,1478881328.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:09.346Z,1478881329.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:09.749Z,1478881329.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:10.156Z,1478881330.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:10.568Z,1478881330.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:10.962Z,1478881330.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:11.362Z,1478881331.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:11.762Z,1478881331.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:12.115Z,1478881332.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:12.526Z,1478881332.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:12.954Z,1478881332.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:13.361Z,1478881333.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:13.765Z,1478881333.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:14.139Z,1478881334.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:14.544Z,1478881334.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:14.933Z,1478881334.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:15.346Z,1478881335.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:15.750Z,1478881335.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:16.117Z,1478881336.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:16.562Z,1478881336.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:16.924Z,1478881336.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:17.340Z,1478881337.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:17.750Z,1478881337.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:18.141Z,1478881338.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:18.534Z,1478881338.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:18.946Z,1478881338.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:19.330Z,1478881339.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:19.737Z,1478881339.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:20.141Z,1478881340.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:20.548Z,1478881340.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:20.930Z,1478881340.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:21.386Z,1478881341.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:21.741Z,1478881341.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:22.198Z,1478881342.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:22.553Z,1478881342.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:22.966Z,1478881342.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:23.373Z,1478881343.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:23.749Z,1478881343.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:24.146Z,1478881344.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:24.600Z,1478881344.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:24.948Z,1478881344.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:25.365Z,1478881345.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:25.749Z,1478881345.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:26.141Z,1478881346.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:26.534Z,1478881346.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:26.939Z,1478881346.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:27.349Z,1478881347.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:27.728Z,1478881347.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:28.140Z,1478881348.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:28.541Z,1478881348.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:28.932Z,1478881348.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:29.332Z,1478881349.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:29.751Z,1478881349.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:30.144Z,1478881350.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:30.537Z,1478881350.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:30.934Z,1478881350.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:31.334Z,1478881351.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:36.904Z,1478881356.904 [NAL9602](INFO): SBD MO Status=2, MOMSN=351, MT Status=2, MTMSN=0
2016-11-11T16:22:36.904Z,1478881356.904 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T16:22:36.954Z,1478881356.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:37.081Z,1478881357.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:37.503Z,1478881357.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:37.910Z,1478881357.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:38.266Z,1478881358.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:38.705Z,1478881358.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:39.073Z,1478881359.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:39.509Z,1478881359.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:39.898Z,1478881359.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:40.291Z,1478881360.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:40.654Z,1478881360.654 [PNI_TCM](ERROR): CRC does not match. Expected:0x12418 got:0x59136
2016-11-11T16:22:40.697Z,1478881360.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:41.081Z,1478881361.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:41.484Z,1478881361.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:41.869Z,1478881361.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:42.277Z,1478881362.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:42.677Z,1478881362.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:43.063Z,1478881363.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:43.459Z,1478881363.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:43.858Z,1478881363.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:44.321Z,1478881364.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:44.673Z,1478881364.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:45.068Z,1478881365.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:45.471Z,1478881365.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:45.869Z,1478881365.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:46.317Z,1478881366.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:46.658Z,1478881366.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:47.059Z,1478881367.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:47.473Z,1478881367.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:47.860Z,1478881367.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:48.298Z,1478881368.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:48.665Z,1478881368.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:49.073Z,1478881369.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:49.477Z,1478881369.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:49.871Z,1478881369.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:50.319Z,1478881370.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:50.669Z,1478881370.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:51.057Z,1478881371.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:51.485Z,1478881371.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:51.861Z,1478881371.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:52.293Z,1478881372.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:52.658Z,1478881372.658 [PNI_TCM](ERROR): CRC does not match. Expected:0x35966 got:0x16962
2016-11-11T16:22:52.681Z,1478881372.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:53.059Z,1478881373.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:53.501Z,1478881373.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:53.877Z,1478881373.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:54.250Z,1478881374.250 [PNI_TCM](ERROR): CRC does not match. Expected:0x53839 got:0x16913
2016-11-11T16:22:54.311Z,1478881374.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:54.723Z,1478881374.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:55.067Z,1478881375.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:55.477Z,1478881375.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:55.877Z,1478881375.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:56.255Z,1478881376.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:56.661Z,1478881376.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:57.056Z,1478881377.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:57.465Z,1478881377.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:57.864Z,1478881377.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:58.320Z,1478881378.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:58.653Z,1478881378.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:59.060Z,1478881379.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:59.456Z,1478881379.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:22:59.872Z,1478881379.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:00.322Z,1478881380.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:00.678Z,1478881380.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:01.068Z,1478881381.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:01.461Z,1478881381.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:01.859Z,1478881381.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:02.314Z,1478881382.314 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:02.314Z,1478881382.314 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 211
2016-11-11T16:23:02.314Z,1478881382.314 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:23:02.321Z,1478881382.321 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:02.321Z,1478881382.321 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 211
2016-11-11T16:23:02.321Z,1478881382.321 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:23:02.323Z,1478881382.323 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:02.323Z,1478881382.323 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 211
2016-11-11T16:23:02.323Z,1478881382.323 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:23:02.338Z,1478881382.338 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:23:02.338Z,1478881382.338 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:23:02.338Z,1478881382.338 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:23:02.678Z,1478881382.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:23:02.678Z,1478881382.678 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 211
2016-11-11T16:23:02.679Z,1478881382.679 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:23:02.679Z,1478881382.679 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 211
2016-11-11T16:23:02.680Z,1478881382.680 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:23:02.680Z,1478881382.680 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 211
2016-11-11T16:23:03.055Z,1478881383.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:23:03.056Z,1478881383.056 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:23:03.056Z,1478881383.056 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:23:03.061Z,1478881383.061 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:23:03.061Z,1478881383.061 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:23:03.062Z,1478881383.062 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:23:03.062Z,1478881383.062 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:23:03.062Z,1478881383.062 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:23:03.063Z,1478881383.063 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:23:03.460Z,1478881383.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:03.861Z,1478881383.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:04.269Z,1478881384.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:04.661Z,1478881384.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:05.067Z,1478881385.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:05.471Z,1478881385.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:05.873Z,1478881385.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:06.263Z,1478881386.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:06.707Z,1478881386.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:07.065Z,1478881387.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:07.465Z,1478881387.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:07.881Z,1478881387.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:08.258Z,1478881388.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:08.713Z,1478881388.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:09.069Z,1478881389.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:09.485Z,1478881389.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:09.877Z,1478881389.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:10.277Z,1478881390.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:10.720Z,1478881390.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:11.073Z,1478881391.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:11.479Z,1478881391.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:11.873Z,1478881391.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:12.294Z,1478881392.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:12.665Z,1478881392.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:13.072Z,1478881393.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:13.473Z,1478881393.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:13.883Z,1478881393.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:14.286Z,1478881394.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:14.661Z,1478881394.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:15.069Z,1478881395.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:15.462Z,1478881395.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:15.874Z,1478881395.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:16.320Z,1478881396.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:16.684Z,1478881396.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:17.078Z,1478881397.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:17.453Z,1478881397.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:17.857Z,1478881397.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:18.295Z,1478881398.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:18.660Z,1478881398.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:19.070Z,1478881399.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:19.461Z,1478881399.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:19.864Z,1478881399.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:20.270Z,1478881400.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:20.670Z,1478881400.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:21.094Z,1478881401.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:21.505Z,1478881401.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:21.877Z,1478881401.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:22.288Z,1478881402.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:22.683Z,1478881402.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:23.089Z,1478881403.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:23.497Z,1478881403.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:23.869Z,1478881403.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:24.269Z,1478881404.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:24.727Z,1478881404.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:25.063Z,1478881405.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:25.474Z,1478881405.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:25.869Z,1478881405.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:26.290Z,1478881406.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:26.665Z,1478881406.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:27.080Z,1478881407.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:27.477Z,1478881407.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:27.857Z,1478881407.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:28.296Z,1478881408.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:28.669Z,1478881408.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:29.073Z,1478881409.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:29.472Z,1478881409.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:29.862Z,1478881409.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:30.297Z,1478881410.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:30.673Z,1478881410.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:31.077Z,1478881411.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:31.454Z,1478881411.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:34.909Z,1478881414.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:35.049Z,1478881415.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:35.452Z,1478881415.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:35.857Z,1478881415.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:36.212Z,1478881416.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:36.629Z,1478881416.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:37.058Z,1478881417.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:37.402Z,1478881417.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:37.845Z,1478881417.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:38.204Z,1478881418.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:38.701Z,1478881418.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:39.009Z,1478881419.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:39.407Z,1478881419.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:39.811Z,1478881419.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:40.284Z,1478881420.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:40.617Z,1478881420.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:41.037Z,1478881421.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:41.439Z,1478881421.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:41.827Z,1478881421.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:42.282Z,1478881422.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:42.605Z,1478881422.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:43.007Z,1478881423.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:43.412Z,1478881423.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:43.817Z,1478881423.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:44.238Z,1478881424.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:44.617Z,1478881424.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:45.020Z,1478881425.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:45.421Z,1478881425.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:45.823Z,1478881425.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:46.265Z,1478881426.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:46.621Z,1478881426.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:47.014Z,1478881427.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:47.414Z,1478881427.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:47.809Z,1478881427.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:48.211Z,1478881428.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:48.616Z,1478881428.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:49.028Z,1478881429.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:49.410Z,1478881429.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:49.830Z,1478881429.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:50.225Z,1478881430.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:50.685Z,1478881430.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:51.024Z,1478881431.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:51.425Z,1478881431.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:51.801Z,1478881431.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:52.205Z,1478881432.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:52.609Z,1478881432.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:53.013Z,1478881433.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:53.410Z,1478881433.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:53.803Z,1478881433.803 [BPC1](ERROR): Failed to receive battery data
2016-11-11T16:23:53.803Z,1478881433.803 [BPC1] Communications Fault, FailCount= 1
2016-11-11T16:23:53.803Z,1478881433.803 [BPC1](ERROR): Communications Fault
2016-11-11T16:23:53.825Z,1478881433.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:53.860Z,1478881433.860 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T16:23:54.242Z,1478881434.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:54.617Z,1478881434.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:55.010Z,1478881435.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:55.030Z,1478881435.030 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:23:55.030Z,1478881435.030 [BPC1] No Fault, FailCount= 1
2016-11-11T16:23:55.473Z,1478881435.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:55.856Z,1478881435.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:56.250Z,1478881436.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:56.610Z,1478881436.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:57.017Z,1478881437.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:57.422Z,1478881437.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:57.816Z,1478881437.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:58.263Z,1478881438.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:58.635Z,1478881438.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:59.025Z,1478881439.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:59.405Z,1478881439.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:23:59.835Z,1478881439.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:00.251Z,1478881440.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:00.613Z,1478881440.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:01.061Z,1478881441.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:01.417Z,1478881441.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:01.809Z,1478881441.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:02.307Z,1478881442.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:02.625Z,1478881442.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:03.058Z,1478881443.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:03.435Z,1478881443.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:03.817Z,1478881443.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:04.220Z,1478881444.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:04.692Z,1478881444.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:05.018Z,1478881445.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:05.411Z,1478881445.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:05.813Z,1478881445.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:06.210Z,1478881446.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:06.670Z,1478881446.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:07.029Z,1478881447.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:07.418Z,1478881447.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:07.813Z,1478881447.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:08.230Z,1478881448.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:08.619Z,1478881448.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:09.018Z,1478881449.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:09.414Z,1478881449.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:09.820Z,1478881449.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:10.251Z,1478881450.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:10.614Z,1478881450.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:11.022Z,1478881451.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:11.417Z,1478881451.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:11.802Z,1478881451.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:12.257Z,1478881452.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:12.604Z,1478881452.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:13.009Z,1478881453.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:13.413Z,1478881453.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:13.822Z,1478881453.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:14.265Z,1478881454.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:14.616Z,1478881454.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:15.019Z,1478881455.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:15.449Z,1478881455.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:15.827Z,1478881455.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:16.308Z,1478881456.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:16.650Z,1478881456.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:17.008Z,1478881457.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:17.434Z,1478881457.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:17.837Z,1478881457.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:18.213Z,1478881458.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:18.645Z,1478881458.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:19.013Z,1478881459.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:19.416Z,1478881459.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:19.821Z,1478881459.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:20.214Z,1478881460.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:20.673Z,1478881460.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:21.015Z,1478881461.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:21.417Z,1478881461.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:21.825Z,1478881461.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:22.237Z,1478881462.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:22.608Z,1478881462.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:23.016Z,1478881463.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:23.408Z,1478881463.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:23.808Z,1478881463.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:24.222Z,1478881464.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:24.622Z,1478881464.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:25.029Z,1478881465.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:25.423Z,1478881465.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:25.813Z,1478881465.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:26.227Z,1478881466.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:26.616Z,1478881466.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:27.016Z,1478881467.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:27.418Z,1478881467.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:27.822Z,1478881467.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:28.233Z,1478881468.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:28.641Z,1478881468.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:29.035Z,1478881469.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:29.440Z,1478881469.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:29.813Z,1478881469.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:30.301Z,1478881470.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:30.617Z,1478881470.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:31.057Z,1478881471.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:31.066Z,1478881471.066 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T16:19:30.9Z
2016-11-11T16:24:31.066Z,1478881471.066 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T16:24:31.066Z,1478881471.066 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T16:24:31.410Z,1478881471.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:32.306Z,1478881472.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:35.677Z,1478881475.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:35.715Z,1478881475.715 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0268.lzma
2016-11-11T16:24:35.809Z,1478881475.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:36.178Z,1478881476.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:36.515Z,1478881476.515 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0268.lzma.bak
2016-11-11T16:24:36.515Z,1478881476.515 [DataOverHttps](INFO): SBD MOMSN=4555565
2016-11-11T16:24:36.553Z,1478881476.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:37.830Z,1478881477.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:37.975Z,1478881477.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:41.355Z,1478881481.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:41.509Z,1478881481.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:41.873Z,1478881481.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:42.277Z,1478881482.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:42.668Z,1478881482.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:43.077Z,1478881483.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:46.761Z,1478881486.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:46.814Z,1478881486.815 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0269.lzma
2016-11-11T16:24:46.885Z,1478881486.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:47.317Z,1478881487.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:47.614Z,1478881487.614 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0269.lzma.bak
2016-11-11T16:24:47.615Z,1478881487.615 [DataOverHttps](INFO): SBD MOMSN=4555567
2016-11-11T16:24:47.659Z,1478881487.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:49.049Z,1478881489.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:49.058Z,1478881489.058 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T16:24:49.058Z,1478881489.058 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T16:24:49.058Z,1478881489.058 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T16:24:49.174Z,1478881489.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:52.837Z,1478881492.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:52.961Z,1478881492.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:53.350Z,1478881493.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:53.744Z,1478881493.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:54.142Z,1478881494.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:54.511Z,1478881494.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:54.913Z,1478881494.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:55.319Z,1478881495.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:55.721Z,1478881495.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:56.142Z,1478881496.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:56.529Z,1478881496.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:56.924Z,1478881496.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:57.324Z,1478881497.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:57.736Z,1478881497.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:58.182Z,1478881498.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:58.538Z,1478881498.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:58.930Z,1478881498.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:59.309Z,1478881499.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:24:59.709Z,1478881499.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:00.112Z,1478881500.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:00.561Z,1478881500.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:00.921Z,1478881500.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:01.320Z,1478881501.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:01.734Z,1478881501.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:02.121Z,1478881502.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:02.592Z,1478881502.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:02.933Z,1478881502.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:03.341Z,1478881503.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:03.761Z,1478881503.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:04.147Z,1478881504.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:04.517Z,1478881504.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:04.913Z,1478881504.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:05.362Z,1478881505.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:05.762Z,1478881505.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:06.073Z,1478881506.073 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T16:25:06.161Z,1478881506.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:06.521Z,1478881506.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:06.961Z,1478881506.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:07.317Z,1478881507.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:07.794Z,1478881507.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:08.136Z,1478881508.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:08.520Z,1478881508.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:08.909Z,1478881508.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:09.308Z,1478881509.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:09.721Z,1478881509.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:10.122Z,1478881510.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:10.517Z,1478881510.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:10.915Z,1478881510.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:11.357Z,1478881511.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:11.676Z,1478881511.676 [NAL9602](INFO): Powering down
2016-11-11T16:25:11.733Z,1478881511.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:12.162Z,1478881512.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:12.530Z,1478881512.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:12.917Z,1478881512.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:13.316Z,1478881513.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:13.711Z,1478881513.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:14.117Z,1478881514.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:14.530Z,1478881514.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:14.913Z,1478881514.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:15.325Z,1478881515.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:15.719Z,1478881515.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:16.113Z,1478881516.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:16.531Z,1478881516.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:16.920Z,1478881516.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:17.331Z,1478881517.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:17.727Z,1478881517.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:18.121Z,1478881518.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:18.549Z,1478881518.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:18.933Z,1478881518.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:19.428Z,1478881519.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:19.753Z,1478881519.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:20.146Z,1478881520.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:20.548Z,1478881520.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:20.936Z,1478881520.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:21.349Z,1478881521.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:21.740Z,1478881521.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:22.137Z,1478881522.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:22.507Z,1478881522.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:22.946Z,1478881522.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:23.311Z,1478881523.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:23.711Z,1478881523.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:24.116Z,1478881524.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:24.533Z,1478881524.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:24.924Z,1478881524.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:25.320Z,1478881525.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:25.726Z,1478881525.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:26.155Z,1478881526.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:26.504Z,1478881526.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:26.915Z,1478881526.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:27.311Z,1478881527.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:27.712Z,1478881527.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:28.121Z,1478881528.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:28.561Z,1478881528.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:28.904Z,1478881528.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:29.329Z,1478881529.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:29.709Z,1478881529.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:30.115Z,1478881530.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:30.537Z,1478881530.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:30.925Z,1478881530.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:31.333Z,1478881531.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:31.717Z,1478881531.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:32.112Z,1478881532.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:32.549Z,1478881532.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:32.915Z,1478881532.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:33.317Z,1478881533.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:33.757Z,1478881533.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:34.122Z,1478881534.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:34.534Z,1478881534.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:34.921Z,1478881534.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:35.330Z,1478881535.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:35.773Z,1478881535.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:36.117Z,1478881536.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:36.517Z,1478881536.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:36.917Z,1478881536.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:37.312Z,1478881537.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:37.717Z,1478881537.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:38.112Z,1478881538.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:38.520Z,1478881538.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:38.917Z,1478881538.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:39.314Z,1478881539.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:39.740Z,1478881539.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:40.162Z,1478881540.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:40.526Z,1478881540.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:40.928Z,1478881540.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:41.341Z,1478881541.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:41.713Z,1478881541.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:42.109Z,1478881542.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:42.537Z,1478881542.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:42.917Z,1478881542.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:43.312Z,1478881543.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:43.722Z,1478881543.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:44.126Z,1478881544.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:44.533Z,1478881544.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:44.920Z,1478881544.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:45.321Z,1478881545.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:45.724Z,1478881545.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:46.145Z,1478881546.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:46.525Z,1478881546.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:46.929Z,1478881546.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:47.330Z,1478881547.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:47.746Z,1478881547.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:48.117Z,1478881548.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:48.516Z,1478881548.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:48.946Z,1478881548.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:49.312Z,1478881549.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:49.757Z,1478881549.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:53.252Z,1478881553.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:53.386Z,1478881553.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:53.727Z,1478881553.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:54.172Z,1478881554.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:54.536Z,1478881554.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:54.933Z,1478881554.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:55.327Z,1478881555.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:55.735Z,1478881555.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:56.152Z,1478881556.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:56.536Z,1478881556.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:56.938Z,1478881556.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:57.337Z,1478881557.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:57.749Z,1478881557.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:58.149Z,1478881558.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:58.555Z,1478881558.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:58.933Z,1478881558.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:59.339Z,1478881559.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:25:59.745Z,1478881559.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:00.128Z,1478881560.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:00.540Z,1478881560.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:00.935Z,1478881560.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:01.342Z,1478881561.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:01.742Z,1478881561.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:02.141Z,1478881562.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:02.538Z,1478881562.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:02.930Z,1478881562.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:03.342Z,1478881563.342 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:03.342Z,1478881563.342 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 212
2016-11-11T16:26:03.342Z,1478881563.342 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:26:03.348Z,1478881563.348 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:03.349Z,1478881563.349 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 212
2016-11-11T16:26:03.349Z,1478881563.349 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:26:03.351Z,1478881563.351 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:03.351Z,1478881563.351 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 212
2016-11-11T16:26:03.351Z,1478881563.351 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:26:03.377Z,1478881563.377 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:26:03.377Z,1478881563.377 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:26:03.378Z,1478881563.378 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:26:03.801Z,1478881563.801 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:26:03.801Z,1478881563.801 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 212
2016-11-11T16:26:03.802Z,1478881563.802 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:26:03.802Z,1478881563.802 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 212
2016-11-11T16:26:03.803Z,1478881563.803 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:26:03.803Z,1478881563.803 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 212
2016-11-11T16:26:04.137Z,1478881564.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:26:04.137Z,1478881564.137 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:26:04.138Z,1478881564.138 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:26:04.142Z,1478881564.142 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:26:04.159Z,1478881564.159 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:26:04.160Z,1478881564.159 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:26:04.160Z,1478881564.160 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:26:04.160Z,1478881564.160 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:26:04.161Z,1478881564.161 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:26:04.542Z,1478881564.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:04.945Z,1478881564.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:04.977Z,1478881564.977 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T16:26:05.332Z,1478881565.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:05.762Z,1478881565.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:06.137Z,1478881566.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:06.553Z,1478881566.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:06.939Z,1478881566.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:07.350Z,1478881567.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:07.753Z,1478881567.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:08.145Z,1478881568.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:08.540Z,1478881568.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:08.947Z,1478881568.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:09.319Z,1478881569.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:09.725Z,1478881569.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:10.125Z,1478881570.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:10.548Z,1478881570.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:10.925Z,1478881570.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:11.326Z,1478881571.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:11.727Z,1478881571.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:12.127Z,1478881572.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:12.544Z,1478881572.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:12.932Z,1478881572.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:13.338Z,1478881573.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:13.736Z,1478881573.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:14.145Z,1478881574.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:14.535Z,1478881574.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:14.930Z,1478881574.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:15.333Z,1478881575.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:15.736Z,1478881575.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:16.141Z,1478881576.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:16.534Z,1478881576.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:16.941Z,1478881576.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:17.340Z,1478881577.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:17.739Z,1478881577.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:18.138Z,1478881578.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:18.561Z,1478881578.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:18.947Z,1478881578.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:19.348Z,1478881579.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:19.753Z,1478881579.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:20.137Z,1478881580.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:20.533Z,1478881580.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:20.966Z,1478881580.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:21.326Z,1478881581.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:21.762Z,1478881581.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:22.170Z,1478881582.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:22.532Z,1478881582.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:22.933Z,1478881582.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:23.332Z,1478881583.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:23.737Z,1478881583.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:24.135Z,1478881584.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:24.533Z,1478881584.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:24.940Z,1478881584.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:25.365Z,1478881585.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:25.744Z,1478881585.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:26.144Z,1478881586.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:26.520Z,1478881586.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:26.929Z,1478881586.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:27.365Z,1478881587.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:27.736Z,1478881587.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:28.127Z,1478881588.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:28.531Z,1478881588.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:28.958Z,1478881588.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:29.328Z,1478881589.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:29.732Z,1478881589.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:30.135Z,1478881590.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:30.542Z,1478881590.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:30.934Z,1478881590.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:31.320Z,1478881591.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:31.728Z,1478881591.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:32.137Z,1478881592.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:32.531Z,1478881592.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:32.928Z,1478881592.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:33.336Z,1478881593.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:33.737Z,1478881593.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:34.146Z,1478881594.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:34.561Z,1478881594.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:34.926Z,1478881594.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:35.361Z,1478881595.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:35.727Z,1478881595.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:36.164Z,1478881596.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:36.528Z,1478881596.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:36.967Z,1478881596.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:37.236Z,1478881597.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:26:37.328Z,1478881597.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:37.729Z,1478881597.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:38.032Z,1478881598.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:26:38.129Z,1478881598.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:38.536Z,1478881598.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:38.930Z,1478881598.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:39.337Z,1478881599.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:39.737Z,1478881599.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:40.137Z,1478881600.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:40.536Z,1478881600.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:40.941Z,1478881600.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:41.338Z,1478881601.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:41.745Z,1478881601.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:42.127Z,1478881602.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:42.527Z,1478881602.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:42.927Z,1478881602.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:43.327Z,1478881603.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:43.727Z,1478881603.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:44.141Z,1478881604.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:44.538Z,1478881604.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:44.930Z,1478881604.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:45.341Z,1478881605.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:45.729Z,1478881605.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:46.140Z,1478881606.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:46.530Z,1478881606.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:46.933Z,1478881606.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:47.132Z,1478881607.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:26:47.340Z,1478881607.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:47.739Z,1478881607.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:47.928Z,1478881607.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:26:48.138Z,1478881608.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:48.336Z,1478881608.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:26:48.540Z,1478881608.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:49.001Z,1478881609.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:49.132Z,1478881609.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:26:49.327Z,1478881609.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:49.766Z,1478881609.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:49.928Z,1478881609.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:26:50.420Z,1478881610.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:26:51.216Z,1478881611.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:26:52.012Z,1478881612.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:26:53.071Z,1478881613.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:53.233Z,1478881613.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:53.566Z,1478881613.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:53.944Z,1478881613.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:54.398Z,1478881614.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:54.745Z,1478881614.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:55.141Z,1478881615.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:55.549Z,1478881615.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:55.952Z,1478881615.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:56.353Z,1478881616.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:56.744Z,1478881616.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:57.146Z,1478881617.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:57.548Z,1478881617.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:57.958Z,1478881617.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:58.393Z,1478881618.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:58.749Z,1478881618.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:59.144Z,1478881619.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:59.555Z,1478881619.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:26:59.957Z,1478881619.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:00.353Z,1478881620.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:00.761Z,1478881620.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:01.148Z,1478881621.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:01.162Z,1478881621.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:01.557Z,1478881621.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:01.944Z,1478881621.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:01.964Z,1478881621.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:02.352Z,1478881622.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:02.365Z,1478881622.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:02.739Z,1478881622.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:03.145Z,1478881623.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:03.156Z,1478881623.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:03.539Z,1478881623.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:03.953Z,1478881623.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:04.006Z,1478881624.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:04.353Z,1478881624.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:04.428Z,1478881624.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:04.747Z,1478881624.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:05.147Z,1478881625.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:05.224Z,1478881625.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:05.594Z,1478881625.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:05.960Z,1478881625.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:06.020Z,1478881626.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:06.406Z,1478881626.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:06.749Z,1478881626.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:06.784Z,1478881626.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:07.182Z,1478881627.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:07.580Z,1478881627.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:07.587Z,1478881627.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:07.953Z,1478881627.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:08.376Z,1478881628.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:08.400Z,1478881628.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:08.751Z,1478881628.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:08.816Z,1478881628.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:09.174Z,1478881629.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:09.578Z,1478881629.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:09.612Z,1478881629.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:09.980Z,1478881629.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:10.288Z,1478881630.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:10.360Z,1478881630.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:10.761Z,1478881630.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:11.084Z,1478881631.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:11.159Z,1478881631.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:11.545Z,1478881631.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:11.880Z,1478881631.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:11.992Z,1478881631.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:12.292Z,1478881632.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:12.358Z,1478881632.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:12.761Z,1478881632.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:13.088Z,1478881633.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:13.161Z,1478881633.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:13.546Z,1478881633.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:13.884Z,1478881633.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:13.988Z,1478881633.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:14.292Z,1478881634.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:14.373Z,1478881634.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:14.738Z,1478881634.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:15.088Z,1478881635.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:15.165Z,1478881635.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:15.557Z,1478881635.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:15.884Z,1478881635.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:15.959Z,1478881635.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:16.296Z,1478881636.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:27:16.376Z,1478881636.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:16.752Z,1478881636.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:17.172Z,1478881637.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:17.536Z,1478881637.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:18.025Z,1478881638.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:18.374Z,1478881638.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:18.770Z,1478881638.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:19.213Z,1478881639.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:19.577Z,1478881639.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:19.955Z,1478881639.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:20.377Z,1478881640.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:20.760Z,1478881640.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:21.181Z,1478881641.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:21.628Z,1478881641.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:21.967Z,1478881641.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:22.355Z,1478881642.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:22.775Z,1478881642.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:23.146Z,1478881643.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:23.557Z,1478881643.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:23.957Z,1478881643.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:24.362Z,1478881644.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:24.759Z,1478881644.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:25.172Z,1478881645.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:25.558Z,1478881645.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:25.991Z,1478881645.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:26.361Z,1478881646.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:26.779Z,1478881646.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:27.165Z,1478881647.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:27.574Z,1478881647.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:27.990Z,1478881647.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:28.355Z,1478881648.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:28.764Z,1478881648.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:29.167Z,1478881649.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:29.569Z,1478881649.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:29.951Z,1478881649.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:30.366Z,1478881650.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:30.757Z,1478881650.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:31.161Z,1478881651.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:31.563Z,1478881651.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:31.988Z,1478881651.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:32.346Z,1478881652.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:32.751Z,1478881652.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:33.205Z,1478881653.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:33.605Z,1478881653.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:33.960Z,1478881653.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:34.409Z,1478881654.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:34.765Z,1478881654.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:35.170Z,1478881655.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:35.541Z,1478881655.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:35.962Z,1478881655.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:36.392Z,1478881656.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:36.756Z,1478881656.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:37.165Z,1478881657.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:37.560Z,1478881657.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:37.953Z,1478881657.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:38.368Z,1478881658.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:38.746Z,1478881658.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:39.149Z,1478881659.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:39.555Z,1478881659.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:39.954Z,1478881659.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:40.352Z,1478881660.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:40.757Z,1478881660.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:41.152Z,1478881661.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:41.562Z,1478881661.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:41.954Z,1478881661.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:42.356Z,1478881662.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:42.755Z,1478881662.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:43.156Z,1478881663.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:43.557Z,1478881663.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:43.957Z,1478881663.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:44.364Z,1478881664.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:44.752Z,1478881664.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:45.156Z,1478881665.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:45.541Z,1478881665.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:45.952Z,1478881665.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:46.343Z,1478881666.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:46.761Z,1478881666.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:47.148Z,1478881667.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:47.546Z,1478881667.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:48.036Z,1478881668.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:48.351Z,1478881668.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:48.753Z,1478881668.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:49.191Z,1478881669.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:49.552Z,1478881669.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:49.992Z,1478881669.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:53.566Z,1478881673.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:53.694Z,1478881673.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:54.072Z,1478881674.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:54.467Z,1478881674.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:54.867Z,1478881674.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:55.273Z,1478881675.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:55.683Z,1478881675.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:56.085Z,1478881676.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:56.465Z,1478881676.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:56.866Z,1478881676.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:57.267Z,1478881677.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:57.673Z,1478881677.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:58.077Z,1478881678.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:58.467Z,1478881678.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:58.873Z,1478881678.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:59.267Z,1478881679.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:27:59.667Z,1478881679.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:00.068Z,1478881680.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:00.477Z,1478881680.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:00.885Z,1478881680.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:01.265Z,1478881681.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:01.663Z,1478881681.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:02.068Z,1478881682.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:02.471Z,1478881682.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:02.867Z,1478881682.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:03.272Z,1478881683.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:03.667Z,1478881683.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:04.073Z,1478881684.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:04.474Z,1478881684.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:04.873Z,1478881684.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:05.298Z,1478881685.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:05.693Z,1478881685.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:06.060Z,1478881686.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:06.504Z,1478881686.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:06.873Z,1478881686.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:07.294Z,1478881687.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:07.697Z,1478881687.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:08.073Z,1478881688.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:08.473Z,1478881688.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:08.867Z,1478881688.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:09.281Z,1478881689.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:09.677Z,1478881689.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:10.088Z,1478881690.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:10.485Z,1478881690.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:10.865Z,1478881690.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:11.260Z,1478881691.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:11.664Z,1478881691.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:12.077Z,1478881692.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:12.467Z,1478881692.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:12.875Z,1478881692.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:13.276Z,1478881693.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:13.678Z,1478881693.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:14.069Z,1478881694.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:14.477Z,1478881694.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:14.876Z,1478881694.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:15.276Z,1478881695.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:15.677Z,1478881695.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:16.072Z,1478881696.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:16.469Z,1478881696.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:16.875Z,1478881696.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:17.278Z,1478881697.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:17.677Z,1478881697.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:18.072Z,1478881698.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:18.493Z,1478881698.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:18.877Z,1478881698.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:19.282Z,1478881699.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:19.745Z,1478881699.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:20.070Z,1478881700.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:20.511Z,1478881700.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:20.881Z,1478881700.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:21.322Z,1478881701.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:21.696Z,1478881701.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:22.071Z,1478881702.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:22.474Z,1478881702.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:22.873Z,1478881702.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:23.273Z,1478881703.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:23.672Z,1478881703.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:24.079Z,1478881704.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:24.481Z,1478881704.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:24.877Z,1478881704.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:25.281Z,1478881705.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:25.678Z,1478881705.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:26.070Z,1478881706.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:26.473Z,1478881706.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:26.868Z,1478881706.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:27.273Z,1478881707.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:27.678Z,1478881707.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:28.077Z,1478881708.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:28.469Z,1478881708.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:28.874Z,1478881708.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:29.270Z,1478881709.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:29.674Z,1478881709.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:30.077Z,1478881710.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:30.481Z,1478881710.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:30.874Z,1478881710.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:31.276Z,1478881711.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:31.685Z,1478881711.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:32.072Z,1478881712.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:32.473Z,1478881712.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:32.885Z,1478881712.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:33.277Z,1478881713.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:33.753Z,1478881713.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:34.060Z,1478881714.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:34.498Z,1478881714.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:34.873Z,1478881714.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:35.298Z,1478881715.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:35.722Z,1478881715.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:36.079Z,1478881716.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:36.471Z,1478881716.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:36.870Z,1478881716.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:37.273Z,1478881717.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:37.722Z,1478881717.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:38.078Z,1478881718.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:38.477Z,1478881718.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:38.877Z,1478881718.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:39.269Z,1478881719.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:39.733Z,1478881719.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:40.074Z,1478881720.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:40.477Z,1478881720.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:40.872Z,1478881720.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:41.272Z,1478881721.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:41.676Z,1478881721.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:42.090Z,1478881722.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:42.468Z,1478881722.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:42.869Z,1478881722.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:43.273Z,1478881723.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:43.696Z,1478881723.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:44.081Z,1478881724.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:44.486Z,1478881724.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:44.886Z,1478881724.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:45.287Z,1478881725.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:45.684Z,1478881725.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:46.064Z,1478881726.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:46.481Z,1478881726.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:46.881Z,1478881726.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:47.321Z,1478881727.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:47.766Z,1478881727.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:48.066Z,1478881728.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:48.490Z,1478881728.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:48.897Z,1478881728.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:49.269Z,1478881729.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:49.754Z,1478881729.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:50.105Z,1478881730.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:53.591Z,1478881733.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:53.786Z,1478881733.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:54.077Z,1478881734.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:54.458Z,1478881734.458 [PNI_TCM](ERROR): CRC does not match. Expected:0x54933 got:0x59264
2016-11-11T16:28:54.485Z,1478881734.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:54.868Z,1478881734.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:55.270Z,1478881735.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:55.672Z,1478881735.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:56.072Z,1478881736.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:56.473Z,1478881736.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:56.869Z,1478881736.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:57.044Z,1478881737.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:28:57.272Z,1478881737.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:57.669Z,1478881737.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:57.840Z,1478881737.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:28:58.069Z,1478881738.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:58.475Z,1478881738.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:58.873Z,1478881738.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:59.269Z,1478881739.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:28:59.673Z,1478881739.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:00.067Z,1478881740.066 [PNI_TCM](ERROR): CRC does not match. Expected:0x15602 got:0x54040
2016-11-11T16:29:00.093Z,1478881740.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:00.475Z,1478881740.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:00.865Z,1478881740.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:01.267Z,1478881741.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:01.726Z,1478881741.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:02.072Z,1478881742.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:02.513Z,1478881742.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:02.867Z,1478881742.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:03.298Z,1478881743.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:03.715Z,1478881743.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:04.099Z,1478881744.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:04.501Z,1478881744.501 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:04.502Z,1478881744.501 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 213
2016-11-11T16:29:04.502Z,1478881744.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:29:04.516Z,1478881744.516 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:04.517Z,1478881744.517 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 213
2016-11-11T16:29:04.517Z,1478881744.517 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:29:04.519Z,1478881744.519 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:04.523Z,1478881744.523 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 213
2016-11-11T16:29:04.523Z,1478881744.523 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:29:04.550Z,1478881744.550 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:29:04.551Z,1478881744.551 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:29:04.555Z,1478881744.555 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:29:04.901Z,1478881744.901 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:29:04.901Z,1478881744.901 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 213
2016-11-11T16:29:04.902Z,1478881744.902 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:29:04.902Z,1478881744.902 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 213
2016-11-11T16:29:04.903Z,1478881744.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:29:04.903Z,1478881744.903 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 213
2016-11-11T16:29:05.270Z,1478881745.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:29:05.270Z,1478881745.270 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:29:05.271Z,1478881745.270 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:29:05.275Z,1478881745.275 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:29:05.276Z,1478881745.276 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:29:05.276Z,1478881745.276 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:29:05.276Z,1478881745.276 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:29:05.277Z,1478881745.277 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:29:05.277Z,1478881745.277 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:29:05.720Z,1478881745.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:06.077Z,1478881746.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:06.449Z,1478881746.449 [PNI_TCM](ERROR): CRC does not match. Expected:0x27508 got:0x4438
2016-11-11T16:29:06.489Z,1478881746.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:06.877Z,1478881746.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:07.288Z,1478881747.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:07.707Z,1478881747.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:08.081Z,1478881748.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:08.461Z,1478881748.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:08.861Z,1478881748.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:09.258Z,1478881749.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:09.661Z,1478881749.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:10.069Z,1478881750.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:10.463Z,1478881750.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:10.869Z,1478881750.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:11.012Z,1478881751.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:29:11.273Z,1478881751.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:11.668Z,1478881751.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:11.808Z,1478881751.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:29:12.073Z,1478881752.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:12.480Z,1478881752.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:12.876Z,1478881752.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:13.261Z,1478881753.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:13.661Z,1478881753.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:14.073Z,1478881754.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:14.469Z,1478881754.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:14.872Z,1478881754.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:15.267Z,1478881755.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:15.711Z,1478881755.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:16.086Z,1478881756.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:16.489Z,1478881756.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:16.872Z,1478881756.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:17.290Z,1478881757.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:17.740Z,1478881757.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:18.103Z,1478881758.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:18.465Z,1478881758.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:18.893Z,1478881758.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:19.273Z,1478881759.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:19.711Z,1478881759.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:20.069Z,1478881760.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:20.477Z,1478881760.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:20.873Z,1478881760.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:21.266Z,1478881761.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:21.714Z,1478881761.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:22.076Z,1478881762.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:22.476Z,1478881762.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:22.875Z,1478881762.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:23.276Z,1478881763.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:23.664Z,1478881763.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:24.083Z,1478881764.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:24.456Z,1478881764.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:24.856Z,1478881764.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:25.263Z,1478881765.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:25.660Z,1478881765.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:26.064Z,1478881766.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:26.464Z,1478881766.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:26.864Z,1478881766.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:27.267Z,1478881767.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:27.664Z,1478881767.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:28.132Z,1478881768.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:28.469Z,1478881768.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:28.873Z,1478881768.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:29.276Z,1478881769.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:29.688Z,1478881769.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:30.075Z,1478881770.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:30.477Z,1478881770.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:30.914Z,1478881770.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:31.282Z,1478881771.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:31.731Z,1478881771.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:32.081Z,1478881772.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:32.487Z,1478881772.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:32.897Z,1478881772.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:33.256Z,1478881773.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:33.694Z,1478881773.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:34.073Z,1478881774.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:34.464Z,1478881774.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:34.863Z,1478881774.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:35.268Z,1478881775.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:35.694Z,1478881775.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:36.083Z,1478881776.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:36.481Z,1478881776.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:36.882Z,1478881776.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:37.261Z,1478881777.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:37.661Z,1478881777.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:38.097Z,1478881778.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:38.464Z,1478881778.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:38.868Z,1478881778.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:39.269Z,1478881779.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:39.672Z,1478881779.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:40.118Z,1478881780.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:40.475Z,1478881780.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:40.877Z,1478881780.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:41.273Z,1478881781.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:41.668Z,1478881781.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:42.140Z,1478881782.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:42.469Z,1478881782.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:42.877Z,1478881782.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:43.270Z,1478881783.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:43.674Z,1478881783.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:44.064Z,1478881784.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:44.482Z,1478881784.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:44.887Z,1478881784.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:45.269Z,1478881785.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:45.698Z,1478881785.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:46.073Z,1478881786.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:46.489Z,1478881786.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:46.882Z,1478881786.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:47.276Z,1478881787.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:47.686Z,1478881787.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:48.073Z,1478881788.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:48.462Z,1478881788.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:48.862Z,1478881788.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:49.269Z,1478881789.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:49.278Z,1478881789.277 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T16:29:49.278Z,1478881789.278 [Default:CheckIn:C.Wait] Stopped
2016-11-11T16:29:49.278Z,1478881789.278 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T16:29:49.278Z,1478881789.278 [Default:CheckIn:D] Running Loop=1
2016-11-11T16:29:49.680Z,1478881789.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:49.721Z,1478881789.721 [Default:CheckIn:D] Stopped
2016-11-11T16:29:49.721Z,1478881789.721 [Default:CheckIn:E] Running Loop=1
2016-11-11T16:29:50.065Z,1478881790.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:50.074Z,1478881790.074 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 699.806836 min 
2016-11-11T16:29:50.074Z,1478881790.074 [Default:CheckIn:E] Stopped
2016-11-11T16:29:50.074Z,1478881790.074 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T16:29:50.074Z,1478881790.074 [Default:CheckIn] Stopped
2016-11-11T16:29:50.074Z,1478881790.074 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T16:29:50.075Z,1478881790.075 [Default:CheckIn](INFO): Running loop #68
2016-11-11T16:29:50.075Z,1478881790.075 [Default:CheckIn] Running Loop=68
2016-11-11T16:29:50.075Z,1478881790.075 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T16:29:50.075Z,1478881790.075 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T16:29:50.473Z,1478881790.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:53.882Z,1478881793.882 [NAL9602](INFO): Powering up
2016-11-11T16:29:53.933Z,1478881793.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:54.099Z,1478881794.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:54.443Z,1478881794.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:54.844Z,1478881794.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:55.244Z,1478881795.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:55.649Z,1478881795.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:56.078Z,1478881796.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:56.436Z,1478881796.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:56.840Z,1478881796.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:57.234Z,1478881797.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:57.677Z,1478881797.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:58.041Z,1478881798.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:58.454Z,1478881798.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:58.837Z,1478881798.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:59.241Z,1478881799.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:29:59.696Z,1478881799.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:00.040Z,1478881800.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:00.479Z,1478881800.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:00.875Z,1478881800.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:01.234Z,1478881801.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:01.650Z,1478881801.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:02.041Z,1478881802.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:02.424Z,1478881802.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:02.850Z,1478881802.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:03.228Z,1478881803.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:03.673Z,1478881803.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:04.034Z,1478881804.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:04.453Z,1478881804.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:04.796Z,1478881804.796 [NAL9602](INFO): NAL9602 initialized
2016-11-11T16:30:04.828Z,1478881804.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:05.233Z,1478881805.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:05.594Z,1478881805.594 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T16:30:05.594Z,1478881805.594 [NAL9602] Data Fault, FailCount= 3
2016-11-11T16:30:05.594Z,1478881805.594 [NAL9602](ERROR): Data Fault
2016-11-11T16:30:05.643Z,1478881805.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:05.707Z,1478881805.707 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T16:30:06.001Z,1478881806.001 [NAL9602](INFO): Powering down
2016-11-11T16:30:06.050Z,1478881806.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:06.441Z,1478881806.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:06.847Z,1478881806.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:06.880Z,1478881806.880 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T16:30:06.881Z,1478881806.881 [NAL9602] No Fault, FailCount= 3
2016-11-11T16:30:07.240Z,1478881807.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:07.651Z,1478881807.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:08.038Z,1478881808.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:08.440Z,1478881808.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:08.843Z,1478881808.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:09.241Z,1478881809.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:09.650Z,1478881809.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:10.046Z,1478881810.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:10.437Z,1478881810.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:10.845Z,1478881810.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:11.193Z,1478881811.193 [NAL9602](INFO): Powering up NAL9602
2016-11-11T16:30:11.229Z,1478881811.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:11.689Z,1478881811.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:12.030Z,1478881812.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:12.440Z,1478881812.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:12.840Z,1478881812.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:13.266Z,1478881813.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:13.694Z,1478881813.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:14.037Z,1478881814.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:14.465Z,1478881814.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:14.831Z,1478881814.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:15.275Z,1478881815.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:15.673Z,1478881815.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:16.095Z,1478881816.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:16.445Z,1478881816.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:16.840Z,1478881816.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:17.241Z,1478881817.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:17.649Z,1478881817.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:18.110Z,1478881818.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:18.429Z,1478881818.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:18.829Z,1478881818.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:19.225Z,1478881819.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:19.637Z,1478881819.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:20.034Z,1478881820.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:20.434Z,1478881820.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:20.838Z,1478881820.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:21.231Z,1478881821.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:21.640Z,1478881821.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:22.054Z,1478881822.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:22.393Z,1478881822.393 [NAL9602](INFO): NAL9602 initialized
2016-11-11T16:30:22.439Z,1478881822.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:22.845Z,1478881822.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:23.247Z,1478881823.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:23.655Z,1478881823.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:24.054Z,1478881824.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:24.444Z,1478881824.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:24.835Z,1478881824.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:25.247Z,1478881825.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:25.631Z,1478881825.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:26.062Z,1478881826.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:26.432Z,1478881826.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:26.841Z,1478881826.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:27.235Z,1478881827.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:27.729Z,1478881827.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:28.037Z,1478881828.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:28.471Z,1478881828.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:28.834Z,1478881828.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:29.273Z,1478881829.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:29.644Z,1478881829.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:30.095Z,1478881830.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:30.441Z,1478881830.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:30.834Z,1478881830.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:31.245Z,1478881831.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:31.633Z,1478881831.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:32.072Z,1478881832.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:32.448Z,1478881832.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:32.852Z,1478881832.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:33.257Z,1478881833.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:33.660Z,1478881833.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:34.029Z,1478881834.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:34.455Z,1478881834.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:34.855Z,1478881834.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:35.230Z,1478881835.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:35.638Z,1478881835.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:36.041Z,1478881836.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:36.432Z,1478881836.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:36.836Z,1478881836.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:37.232Z,1478881837.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:37.645Z,1478881837.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:38.041Z,1478881838.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:38.434Z,1478881838.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:38.841Z,1478881838.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:39.241Z,1478881839.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:39.655Z,1478881839.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:40.035Z,1478881840.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:40.441Z,1478881840.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:40.873Z,1478881840.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:41.240Z,1478881841.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:41.690Z,1478881841.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:42.069Z,1478881842.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:42.452Z,1478881842.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:42.857Z,1478881842.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:43.245Z,1478881843.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:43.657Z,1478881843.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:44.073Z,1478881844.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:44.433Z,1478881844.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:44.833Z,1478881844.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:45.232Z,1478881845.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:45.637Z,1478881845.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:46.049Z,1478881846.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:46.442Z,1478881846.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:46.835Z,1478881846.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:47.237Z,1478881847.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:47.634Z,1478881847.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:48.036Z,1478881848.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:48.441Z,1478881848.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:48.841Z,1478881848.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:49.243Z,1478881849.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:49.641Z,1478881849.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:50.041Z,1478881850.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:50.438Z,1478881850.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:50.843Z,1478881850.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:54.286Z,1478881854.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:54.441Z,1478881854.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:54.789Z,1478881854.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:55.173Z,1478881855.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:55.594Z,1478881855.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:55.961Z,1478881855.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:56.394Z,1478881856.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:56.772Z,1478881856.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:57.185Z,1478881857.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:57.577Z,1478881857.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:58.054Z,1478881858.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:58.365Z,1478881858.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:58.791Z,1478881858.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:59.186Z,1478881859.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:30:59.592Z,1478881859.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:00.052Z,1478881860.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:00.363Z,1478881860.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:00.764Z,1478881860.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:01.165Z,1478881861.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:01.576Z,1478881861.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:01.968Z,1478881861.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:02.372Z,1478881862.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:02.770Z,1478881862.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:03.169Z,1478881863.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:03.578Z,1478881863.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:03.968Z,1478881863.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:04.369Z,1478881864.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:04.765Z,1478881864.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:05.165Z,1478881865.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:05.581Z,1478881865.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:05.974Z,1478881865.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:06.370Z,1478881866.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:06.769Z,1478881866.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:07.169Z,1478881867.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:07.581Z,1478881867.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:07.985Z,1478881867.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:08.390Z,1478881868.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:08.773Z,1478881868.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:09.193Z,1478881869.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:09.620Z,1478881869.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:09.961Z,1478881869.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:10.360Z,1478881870.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:10.802Z,1478881870.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:11.161Z,1478881871.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:11.574Z,1478881871.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:12.017Z,1478881872.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:12.370Z,1478881872.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:12.812Z,1478881872.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:13.193Z,1478881873.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:13.566Z,1478881873.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:13.990Z,1478881873.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:14.381Z,1478881874.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:14.775Z,1478881874.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:15.165Z,1478881875.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:15.591Z,1478881875.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:15.970Z,1478881875.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:16.388Z,1478881876.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:16.780Z,1478881876.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:17.161Z,1478881877.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:17.589Z,1478881877.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:17.960Z,1478881877.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:18.365Z,1478881878.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:18.771Z,1478881878.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:19.165Z,1478881879.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:19.581Z,1478881879.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:19.970Z,1478881879.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:20.373Z,1478881880.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:20.766Z,1478881880.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:21.162Z,1478881881.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:21.577Z,1478881881.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:21.973Z,1478881881.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:22.362Z,1478881882.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:22.769Z,1478881882.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:23.162Z,1478881883.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:23.611Z,1478881883.611 [BPC1](ERROR): Failed to parse message.
2016-11-11T16:31:23.611Z,1478881883.611 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T16:31:23.623Z,1478881883.623 [BPC1] Data Fault, FailCount= 1
2016-11-11T16:31:23.623Z,1478881883.623 [BPC1](ERROR): Data Fault
2016-11-11T16:31:23.635Z,1478881883.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:23.679Z,1478881883.679 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T16:31:23.973Z,1478881883.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:24.024Z,1478881884.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:31:24.368Z,1478881884.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:24.766Z,1478881884.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:24.786Z,1478881884.786 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:31:24.786Z,1478881884.786 [BPC1] No Fault, FailCount= 1
2016-11-11T16:31:24.820Z,1478881884.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:31:25.233Z,1478881885.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:25.613Z,1478881885.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:25.994Z,1478881885.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:26.373Z,1478881886.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:26.774Z,1478881886.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:27.173Z,1478881887.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:27.557Z,1478881887.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:27.994Z,1478881887.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:28.364Z,1478881888.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:28.769Z,1478881888.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:29.162Z,1478881889.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:29.584Z,1478881889.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:29.983Z,1478881889.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:30.362Z,1478881890.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:30.773Z,1478881890.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:31.171Z,1478881891.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:31.577Z,1478881891.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:31.974Z,1478881891.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:32.374Z,1478881892.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:32.772Z,1478881892.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:33.169Z,1478881893.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:33.573Z,1478881893.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:33.979Z,1478881893.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:34.357Z,1478881894.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:34.765Z,1478881894.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:35.165Z,1478881895.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:35.564Z,1478881895.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:35.986Z,1478881895.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:36.362Z,1478881896.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:36.774Z,1478881896.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:37.170Z,1478881897.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:37.641Z,1478881897.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:37.979Z,1478881897.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:38.381Z,1478881898.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:38.789Z,1478881898.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:39.176Z,1478881899.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:39.593Z,1478881899.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:40.037Z,1478881900.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:40.390Z,1478881900.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:40.771Z,1478881900.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:41.161Z,1478881901.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:41.560Z,1478881901.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:41.966Z,1478881901.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:42.367Z,1478881902.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:42.773Z,1478881902.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:43.181Z,1478881903.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:43.571Z,1478881903.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:43.966Z,1478881903.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:44.365Z,1478881904.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:44.762Z,1478881904.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:45.173Z,1478881905.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:45.569Z,1478881905.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:45.962Z,1478881905.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:46.364Z,1478881906.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:46.763Z,1478881906.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:47.185Z,1478881907.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:47.574Z,1478881907.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:47.991Z,1478881907.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:48.377Z,1478881908.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:48.772Z,1478881908.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:49.173Z,1478881909.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:49.576Z,1478881909.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:49.972Z,1478881909.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:50.373Z,1478881910.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:50.773Z,1478881910.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:51.185Z,1478881911.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:54.757Z,1478881914.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:54.897Z,1478881914.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:55.303Z,1478881915.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:55.722Z,1478881915.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:56.094Z,1478881916.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:56.525Z,1478881916.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:56.911Z,1478881916.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:57.279Z,1478881917.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:57.683Z,1478881917.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:58.081Z,1478881918.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:58.483Z,1478881918.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:58.879Z,1478881918.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:59.297Z,1478881919.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:31:59.692Z,1478881919.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:00.085Z,1478881920.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:00.492Z,1478881920.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:00.889Z,1478881920.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:01.297Z,1478881921.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:01.701Z,1478881921.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:02.093Z,1478881922.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:02.481Z,1478881922.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:02.876Z,1478881922.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:03.285Z,1478881923.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:03.689Z,1478881923.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:04.085Z,1478881924.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:04.479Z,1478881924.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:04.885Z,1478881924.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:05.346Z,1478881925.346 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:05.347Z,1478881925.347 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 214
2016-11-11T16:32:05.347Z,1478881925.347 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:32:05.365Z,1478881925.365 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:05.365Z,1478881925.365 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 214
2016-11-11T16:32:05.365Z,1478881925.365 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:32:05.399Z,1478881925.399 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:05.399Z,1478881925.399 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 214
2016-11-11T16:32:05.399Z,1478881925.399 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:32:05.447Z,1478881925.447 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:32:05.496Z,1478881925.496 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:32:05.496Z,1478881925.496 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:32:05.774Z,1478881925.774 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:32:05.774Z,1478881925.774 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 214
2016-11-11T16:32:05.783Z,1478881925.783 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:32:05.783Z,1478881925.783 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 214
2016-11-11T16:32:05.784Z,1478881925.784 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:32:05.784Z,1478881925.784 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 214
2016-11-11T16:32:06.089Z,1478881926.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:32:06.090Z,1478881926.090 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:32:06.090Z,1478881926.090 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:32:06.124Z,1478881926.124 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:32:06.124Z,1478881926.124 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:32:06.125Z,1478881926.125 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:32:06.125Z,1478881926.125 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:32:06.126Z,1478881926.126 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:32:06.126Z,1478881926.126 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:32:06.493Z,1478881926.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:06.933Z,1478881926.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:07.307Z,1478881927.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:07.697Z,1478881927.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:08.138Z,1478881928.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:08.496Z,1478881928.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:08.878Z,1478881928.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:09.332Z,1478881929.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:09.710Z,1478881929.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:10.111Z,1478881930.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:10.514Z,1478881930.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:10.897Z,1478881930.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:11.314Z,1478881931.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:11.674Z,1478881931.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:12.116Z,1478881932.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:12.488Z,1478881932.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:12.881Z,1478881932.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:13.292Z,1478881933.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:13.715Z,1478881933.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:14.089Z,1478881934.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:14.506Z,1478881934.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:14.893Z,1478881934.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:15.288Z,1478881935.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:15.714Z,1478881935.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:16.082Z,1478881936.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:16.502Z,1478881936.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:16.890Z,1478881936.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:17.296Z,1478881937.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:17.721Z,1478881937.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:18.102Z,1478881938.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:18.486Z,1478881938.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:18.909Z,1478881938.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:19.317Z,1478881939.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:19.677Z,1478881939.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:20.108Z,1478881940.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:20.490Z,1478881940.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:20.895Z,1478881940.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:21.302Z,1478881941.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:21.702Z,1478881941.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:22.089Z,1478881942.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:22.496Z,1478881942.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:22.896Z,1478881942.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:23.299Z,1478881943.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:23.710Z,1478881943.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:24.201Z,1478881944.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:24.503Z,1478881944.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:24.909Z,1478881944.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:25.381Z,1478881945.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:25.764Z,1478881945.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:26.133Z,1478881946.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:26.538Z,1478881946.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:26.917Z,1478881946.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:27.295Z,1478881947.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:27.691Z,1478881947.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:28.094Z,1478881948.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:28.508Z,1478881948.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:28.924Z,1478881948.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:29.297Z,1478881949.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:29.679Z,1478881949.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:30.104Z,1478881950.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:30.497Z,1478881950.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:30.899Z,1478881950.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:31.345Z,1478881951.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:31.699Z,1478881951.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:32.094Z,1478881952.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:32.496Z,1478881952.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:32.904Z,1478881952.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:33.295Z,1478881953.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:33.698Z,1478881953.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:34.093Z,1478881954.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:34.500Z,1478881954.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:34.899Z,1478881954.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:35.306Z,1478881955.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:35.683Z,1478881955.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:36.083Z,1478881956.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:36.537Z,1478881956.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:36.894Z,1478881956.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:37.294Z,1478881957.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:37.696Z,1478881957.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:38.117Z,1478881958.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:38.488Z,1478881958.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:38.902Z,1478881958.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:39.282Z,1478881959.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:39.701Z,1478881959.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:40.139Z,1478881960.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:40.497Z,1478881960.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:40.917Z,1478881960.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:41.345Z,1478881961.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:41.687Z,1478881961.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:42.097Z,1478881962.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:42.487Z,1478881962.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:42.890Z,1478881962.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:43.311Z,1478881963.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:43.694Z,1478881963.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:44.078Z,1478881964.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:44.483Z,1478881964.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:44.879Z,1478881964.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:45.326Z,1478881965.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:45.674Z,1478881965.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:46.080Z,1478881966.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:46.485Z,1478881966.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:46.883Z,1478881966.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:47.275Z,1478881967.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:47.676Z,1478881967.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:48.078Z,1478881968.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:48.494Z,1478881968.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:48.904Z,1478881968.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:49.279Z,1478881969.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:49.696Z,1478881969.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:50.080Z,1478881970.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:50.480Z,1478881970.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:50.876Z,1478881970.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:51.295Z,1478881971.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:54.790Z,1478881974.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:54.915Z,1478881974.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:55.276Z,1478881975.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:55.690Z,1478881975.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:56.074Z,1478881976.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:56.493Z,1478881976.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:56.889Z,1478881976.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:57.285Z,1478881977.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:57.714Z,1478881977.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:58.061Z,1478881978.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:58.463Z,1478881978.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:58.859Z,1478881978.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:59.261Z,1478881979.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:32:59.664Z,1478881979.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:00.064Z,1478881980.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:00.460Z,1478881980.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:00.879Z,1478881980.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:01.265Z,1478881981.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:01.677Z,1478881981.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:02.073Z,1478881982.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:02.478Z,1478881982.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:02.865Z,1478881982.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:03.264Z,1478881983.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:03.669Z,1478881983.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:04.075Z,1478881984.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:04.465Z,1478881984.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:04.860Z,1478881984.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:05.263Z,1478881985.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:05.677Z,1478881985.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:06.064Z,1478881986.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:06.463Z,1478881986.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:06.863Z,1478881986.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:07.285Z,1478881987.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:07.664Z,1478881987.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:08.063Z,1478881988.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:08.465Z,1478881988.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:08.917Z,1478881988.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:09.262Z,1478881989.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:09.665Z,1478881989.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:10.101Z,1478881990.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:10.474Z,1478881990.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:10.972Z,1478881990.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:11.309Z,1478881991.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:11.682Z,1478881991.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:12.069Z,1478881992.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:12.485Z,1478881992.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:12.869Z,1478881992.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:13.308Z,1478881993.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:13.673Z,1478881993.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:14.076Z,1478881994.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:14.485Z,1478881994.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:14.873Z,1478881994.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:15.289Z,1478881995.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:15.673Z,1478881995.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:16.077Z,1478881996.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:16.465Z,1478881996.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:16.872Z,1478881996.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:17.287Z,1478881997.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:17.659Z,1478881997.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:18.072Z,1478881998.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:18.483Z,1478881998.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:18.880Z,1478881998.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:19.277Z,1478881999.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:19.673Z,1478881999.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:20.074Z,1478882000.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:20.477Z,1478882000.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:20.884Z,1478882000.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:21.324Z,1478882001.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:21.658Z,1478882001.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:22.070Z,1478882002.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:22.465Z,1478882002.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:22.869Z,1478882002.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:23.381Z,1478882003.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:23.676Z,1478882003.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:24.086Z,1478882004.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:24.478Z,1478882004.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:24.889Z,1478882004.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:25.338Z,1478882005.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:25.677Z,1478882005.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:26.061Z,1478882006.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:26.465Z,1478882006.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:26.861Z,1478882006.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:27.334Z,1478882007.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:27.666Z,1478882007.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:28.070Z,1478882008.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:28.468Z,1478882008.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:28.869Z,1478882008.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:29.268Z,1478882009.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:29.679Z,1478882009.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:30.078Z,1478882010.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:30.474Z,1478882010.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:30.873Z,1478882010.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:31.275Z,1478882011.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:31.673Z,1478882011.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:32.081Z,1478882012.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:32.456Z,1478882012.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:32.856Z,1478882012.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:32.884Z,1478882012.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:33.242Z,1478882013.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:33.273Z,1478882013.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:33.667Z,1478882013.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:33.735Z,1478882013.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:34.060Z,1478882014.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:34.088Z,1478882014.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:34.446Z,1478882014.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:34.472Z,1478882014.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:34.850Z,1478882014.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:34.876Z,1478882014.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:35.262Z,1478882015.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:35.312Z,1478882015.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:35.641Z,1478882015.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:35.658Z,1478882015.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:36.041Z,1478882016.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:36.062Z,1478882016.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:36.441Z,1478882016.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:36.462Z,1478882016.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:36.844Z,1478882016.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:36.869Z,1478882016.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:37.266Z,1478882017.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:37.341Z,1478882017.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:37.654Z,1478882017.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:37.669Z,1478882017.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:38.063Z,1478882018.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:38.079Z,1478882018.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:38.459Z,1478882018.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:38.474Z,1478882018.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:38.879Z,1478882018.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:39.314Z,1478882019.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:39.680Z,1478882019.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:40.041Z,1478882020.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:40.087Z,1478882020.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:40.441Z,1478882020.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:40.450Z,1478882020.450 [BPC1](ERROR): Failed to receive battery data
2016-11-11T16:33:40.450Z,1478882020.450 [BPC1] Communications Fault, FailCount= 1
2016-11-11T16:33:40.450Z,1478882020.450 [BPC1](ERROR): Communications Fault
2016-11-11T16:33:40.458Z,1478882020.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:40.514Z,1478882020.514 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T16:33:40.852Z,1478882020.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:40.884Z,1478882020.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:41.270Z,1478882021.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:41.297Z,1478882021.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:41.645Z,1478882021.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:41.685Z,1478882021.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:41.725Z,1478882021.725 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:33:41.725Z,1478882021.726 [BPC1] No Fault, FailCount= 1
2016-11-11T16:33:42.045Z,1478882022.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:42.129Z,1478882022.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:42.441Z,1478882022.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:42.461Z,1478882022.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:42.856Z,1478882022.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:42.913Z,1478882022.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:43.255Z,1478882023.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:43.271Z,1478882023.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:43.655Z,1478882023.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:43.677Z,1478882023.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:44.053Z,1478882024.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:44.073Z,1478882024.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:44.448Z,1478882024.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:44.463Z,1478882024.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:44.849Z,1478882024.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:44.865Z,1478882024.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:45.244Z,1478882025.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:45.272Z,1478882025.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:45.644Z,1478882025.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:45.748Z,1478882025.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:46.041Z,1478882026.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:46.061Z,1478882026.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:46.446Z,1478882026.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:46.466Z,1478882026.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:46.848Z,1478882026.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:46.863Z,1478882026.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:47.248Z,1478882027.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:47.269Z,1478882027.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:47.670Z,1478882027.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:47.729Z,1478882027.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:48.058Z,1478882028.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:48.077Z,1478882028.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:48.463Z,1478882028.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:48.477Z,1478882028.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:48.856Z,1478882028.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:48.874Z,1478882028.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:49.256Z,1478882029.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:49.324Z,1478882029.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:49.641Z,1478882029.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:49.674Z,1478882029.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:50.041Z,1478882030.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:50.073Z,1478882030.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:50.441Z,1478882030.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:50.477Z,1478882030.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:50.841Z,1478882030.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:50.873Z,1478882030.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:51.255Z,1478882031.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:51.312Z,1478882031.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:51.647Z,1478882031.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:51.663Z,1478882031.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:55.006Z,1478882035.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:55.092Z,1478882035.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:55.209Z,1478882035.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:55.254Z,1478882035.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:55.590Z,1478882035.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:55.609Z,1478882035.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:56.045Z,1478882036.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:56.382Z,1478882036.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:56.814Z,1478882036.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:57.229Z,1478882037.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:57.591Z,1478882037.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:57.997Z,1478882037.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:58.433Z,1478882038.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:58.556Z,1478882038.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:58.801Z,1478882038.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:59.173Z,1478882039.173 [PNI_TCM](ERROR): CRC does not match. Expected:0x2098 got:0x17026
2016-11-11T16:33:59.197Z,1478882039.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:33:59.352Z,1478882039.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:33:59.601Z,1478882039.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:00.017Z,1478882040.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:00.392Z,1478882040.392 [PNI_TCM](ERROR): CRC does not match. Expected:0x482 got:0x59200
2016-11-11T16:34:00.417Z,1478882040.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:00.816Z,1478882040.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:01.206Z,1478882041.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:01.603Z,1478882041.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:01.996Z,1478882041.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:02.398Z,1478882042.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:02.797Z,1478882042.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:03.252Z,1478882043.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:03.601Z,1478882043.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:03.987Z,1478882043.987 [PNI_TCM](ERROR): CRC does not match. Expected:0x18614 got:0x16871
2016-11-11T16:34:04.013Z,1478882044.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:04.394Z,1478882044.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:04.803Z,1478882044.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:05.204Z,1478882045.204 [PNI_TCM](ERROR): CRC does not match. Expected:0x12683 got:0x1857
2016-11-11T16:34:05.254Z,1478882045.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:05.609Z,1478882045.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:06.004Z,1478882046.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:06.406Z,1478882046.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:06.805Z,1478882046.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:07.247Z,1478882047.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:07.606Z,1478882047.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:08.013Z,1478882048.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:08.378Z,1478882048.378 [PNI_TCM](ERROR): CRC does not match. Expected:0x60028 got:0x189
2016-11-11T16:34:08.417Z,1478882048.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:08.805Z,1478882048.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:09.293Z,1478882049.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:09.602Z,1478882049.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:09.997Z,1478882049.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:10.437Z,1478882050.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:10.808Z,1478882050.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:11.242Z,1478882051.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:11.642Z,1478882051.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:11.994Z,1478882051.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:12.399Z,1478882052.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:12.548Z,1478882052.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:12.794Z,1478882052.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:13.200Z,1478882053.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:13.344Z,1478882053.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:13.597Z,1478882053.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:14.008Z,1478882054.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:14.403Z,1478882054.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:14.785Z,1478882054.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:15.180Z,1478882055.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:15.607Z,1478882055.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:15.997Z,1478882055.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:16.401Z,1478882056.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:16.798Z,1478882056.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:17.264Z,1478882057.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:17.597Z,1478882057.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:17.993Z,1478882057.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:18.401Z,1478882058.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:18.790Z,1478882058.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:19.220Z,1478882059.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:19.602Z,1478882059.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:19.986Z,1478882059.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:20.385Z,1478882060.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:20.812Z,1478882060.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:21.234Z,1478882061.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:21.607Z,1478882061.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:22.002Z,1478882062.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:22.396Z,1478882062.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:22.817Z,1478882062.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:23.259Z,1478882063.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:23.593Z,1478882063.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:23.989Z,1478882063.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:24.422Z,1478882064.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:24.788Z,1478882064.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:25.221Z,1478882065.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:25.619Z,1478882065.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:25.998Z,1478882065.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:26.398Z,1478882066.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:26.532Z,1478882066.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:26.819Z,1478882066.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:27.202Z,1478882067.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:27.328Z,1478882067.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:27.645Z,1478882067.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:27.999Z,1478882068.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:28.400Z,1478882068.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:28.799Z,1478882068.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:29.200Z,1478882069.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:29.639Z,1478882069.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:29.990Z,1478882069.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:30.397Z,1478882070.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:30.798Z,1478882070.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:31.224Z,1478882071.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:31.602Z,1478882071.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:32.014Z,1478882072.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:32.402Z,1478882072.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:32.820Z,1478882072.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:33.223Z,1478882073.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:33.586Z,1478882073.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:34.016Z,1478882074.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:34.393Z,1478882074.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:34.787Z,1478882074.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:35.208Z,1478882075.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:35.595Z,1478882075.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:36.034Z,1478882076.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:36.409Z,1478882076.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:36.808Z,1478882076.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:37.215Z,1478882077.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:37.625Z,1478882077.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:38.007Z,1478882078.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:38.401Z,1478882078.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:38.448Z,1478882078.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:38.825Z,1478882078.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:39.185Z,1478882079.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:39.244Z,1478882079.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:39.619Z,1478882079.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:39.724Z,1478882079.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:40.029Z,1478882080.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:40.397Z,1478882080.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:40.520Z,1478882080.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:40.790Z,1478882080.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:41.193Z,1478882081.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:41.317Z,1478882081.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:41.688Z,1478882081.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:41.999Z,1478882081.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:42.060Z,1478882082.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:42.403Z,1478882082.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:42.803Z,1478882082.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:42.856Z,1478882082.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:43.196Z,1478882083.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:43.637Z,1478882083.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:43.652Z,1478882083.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:43.989Z,1478882083.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:44.080Z,1478882084.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:44.392Z,1478882084.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:44.796Z,1478882084.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:44.876Z,1478882084.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:45.238Z,1478882085.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:45.595Z,1478882085.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:45.608Z,1478882085.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:45.988Z,1478882085.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:46.392Z,1478882086.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:46.404Z,1478882086.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:46.809Z,1478882086.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:47.200Z,1478882087.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:47.218Z,1478882087.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:47.608Z,1478882087.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:47.615Z,1478882087.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:48.003Z,1478882088.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:48.401Z,1478882088.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:48.404Z,1478882088.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:48.805Z,1478882088.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:49.194Z,1478882089.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:49.200Z,1478882089.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:49.592Z,1478882089.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:49.620Z,1478882089.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:49.993Z,1478882089.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:50.416Z,1478882090.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:50.421Z,1478882090.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:50.443Z,1478882090.443 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T16:29:50.1Z
2016-11-11T16:34:50.443Z,1478882090.443 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T16:34:50.443Z,1478882090.443 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T16:34:50.788Z,1478882090.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:51.212Z,1478882091.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:51.621Z,1478882091.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:51.739Z,1478882091.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:51.889Z,1478882091.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:52.416Z,1478882092.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:53.213Z,1478882093.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:53.684Z,1478882093.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:54.480Z,1478882094.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:55.216Z,1478882095.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:55.268Z,1478882095.268 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0272.lzma
2016-11-11T16:34:55.276Z,1478882095.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:55.373Z,1478882095.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:55.717Z,1478882095.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:56.020Z,1478882096.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:56.070Z,1478882096.070 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0272.lzma.bak
2016-11-11T16:34:56.070Z,1478882096.070 [DataOverHttps](INFO): SBD MOMSN=4555572
2016-11-11T16:34:56.154Z,1478882096.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:56.817Z,1478882096.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:57.602Z,1478882097.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:57.612Z,1478882097.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:57.789Z,1478882097.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:34:58.048Z,1478882098.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:58.844Z,1478882098.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:34:59.548Z,1478882099.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:00.344Z,1478882100.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:01.152Z,1478882101.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:01.245Z,1478882101.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:01.393Z,1478882101.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:01.608Z,1478882101.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:01.747Z,1478882101.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:02.126Z,1478882102.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:02.404Z,1478882102.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:02.524Z,1478882102.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:02.925Z,1478882102.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:03.200Z,1478882103.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:03.608Z,1478882103.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:04.404Z,1478882104.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:05.200Z,1478882105.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:05.608Z,1478882105.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:06.360Z,1478882106.360 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:06.360Z,1478882106.360 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 215
2016-11-11T16:35:06.360Z,1478882106.360 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:35:06.366Z,1478882106.366 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:06.366Z,1478882106.366 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 215
2016-11-11T16:35:06.366Z,1478882106.366 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:35:06.369Z,1478882106.369 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:06.369Z,1478882106.369 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 215
2016-11-11T16:35:06.369Z,1478882106.369 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:35:06.383Z,1478882106.383 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:35:06.384Z,1478882106.384 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:35:06.384Z,1478882106.384 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:35:06.404Z,1478882106.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:06.432Z,1478882106.432 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20161111T044527/Express0273.lzma
2016-11-11T16:35:06.539Z,1478882106.539 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:35:06.539Z,1478882106.539 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 215
2016-11-11T16:35:06.544Z,1478882106.544 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:35:06.544Z,1478882106.544 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 215
2016-11-11T16:35:06.544Z,1478882106.544 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:35:06.544Z,1478882106.544 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 215
2016-11-11T16:35:06.849Z,1478882106.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:35:06.850Z,1478882106.849 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:35:06.850Z,1478882106.850 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:35:06.879Z,1478882106.879 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:35:06.880Z,1478882106.880 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:35:06.880Z,1478882106.880 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:35:06.881Z,1478882106.881 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:35:06.881Z,1478882106.881 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:35:06.882Z,1478882106.882 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:35:07.197Z,1478882107.197 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0273.lzma.bak
2016-11-11T16:35:07.197Z,1478882107.197 [DataOverHttps](INFO): SBD MOMSN=4555574
2016-11-11T16:35:07.201Z,1478882107.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:07.301Z,1478882107.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:07.660Z,1478882107.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:08.456Z,1478882108.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:08.535Z,1478882108.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:08.544Z,1478882108.544 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T16:35:08.544Z,1478882108.545 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T16:35:08.545Z,1478882108.545 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T16:35:08.682Z,1478882108.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:09.252Z,1478882109.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:09.000Z,1478882110.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:10.796Z,1478882110.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:11.592Z,1478882111.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:12.126Z,1478882112.126 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T16:35:12.127Z,1478882112.127 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T16:35:12.127Z,1478882112.127 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T16:35:12.128Z,1478882112.128 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T16:35:12.128Z,1478882112.128 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T16:35:12.129Z,1478882112.129 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T16:35:12.129Z,1478882112.129 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T16:35:12.129Z,1478882112.129 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T16:35:12.217Z,1478882112.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:12.369Z,1478882112.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:12.388Z,1478882112.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:12.774Z,1478882112.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:12.796Z,1478882112.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:13.202Z,1478882113.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:13.524Z,1478882113.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:13.563Z,1478882113.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:13.979Z,1478882113.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:14.320Z,1478882114.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:14.365Z,1478882114.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:14.789Z,1478882114.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:15.117Z,1478882115.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:15.170Z,1478882115.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:15.524Z,1478882115.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:15.600Z,1478882115.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:15.961Z,1478882115.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:16.320Z,1478882116.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:16.365Z,1478882116.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:16.758Z,1478882116.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:17.116Z,1478882117.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:17.175Z,1478882117.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:17.524Z,1478882117.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:17.563Z,1478882117.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:17.974Z,1478882117.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:18.320Z,1478882118.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:18.363Z,1478882118.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:18.772Z,1478882118.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:19.117Z,1478882119.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:19.149Z,1478882119.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:19.530Z,1478882119.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:19.548Z,1478882119.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:19.953Z,1478882119.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:20.326Z,1478882120.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:20.353Z,1478882120.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:20.757Z,1478882120.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:21.120Z,1478882121.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:21.201Z,1478882121.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:21.545Z,1478882121.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:21.640Z,1478882121.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:21.946Z,1478882121.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:22.377Z,1478882122.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:22.436Z,1478882122.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:22.771Z,1478882122.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:23.157Z,1478882123.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:23.232Z,1478882123.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:23.585Z,1478882123.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:23.949Z,1478882123.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:24.012Z,1478882124.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:24.356Z,1478882124.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:24.752Z,1478882124.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:24.808Z,1478882124.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:25.149Z,1478882125.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:25.510Z,1478882125.510 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T16:35:25.573Z,1478882125.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:25.604Z,1478882125.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:25.959Z,1478882125.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:26.020Z,1478882126.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:26.385Z,1478882126.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:26.749Z,1478882126.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:26.816Z,1478882126.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:27.176Z,1478882127.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:27.476Z,1478882127.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:27.585Z,1478882127.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:27.964Z,1478882127.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:28.358Z,1478882128.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:28.785Z,1478882128.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:29.157Z,1478882129.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:29.586Z,1478882129.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:29.993Z,1478882129.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:30.278Z,1478882130.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:30.364Z,1478882130.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:30.757Z,1478882130.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:31.072Z,1478882131.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:31.116Z,1478882131.116 [NAL9602](INFO): Powering down
2016-11-11T16:35:31.176Z,1478882131.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:31.480Z,1478882131.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:31.549Z,1478882131.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:31.957Z,1478882131.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:32.276Z,1478882132.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:32.348Z,1478882132.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:32.750Z,1478882132.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:33.072Z,1478882133.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:33.167Z,1478882133.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:33.480Z,1478882133.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:33.557Z,1478882133.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:33.974Z,1478882133.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:34.276Z,1478882134.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:34.355Z,1478882134.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:34.759Z,1478882134.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:35.072Z,1478882135.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:35.260Z,1478882135.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:35.561Z,1478882135.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:35.636Z,1478882135.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:36.026Z,1478882136.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:36.360Z,1478882136.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:36.432Z,1478882136.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:36.745Z,1478882136.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:37.149Z,1478882137.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:37.228Z,1478882137.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:37.564Z,1478882137.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:37.961Z,1478882137.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:37.980Z,1478882137.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:38.353Z,1478882138.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:38.748Z,1478882138.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:38.792Z,1478882138.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:39.140Z,1478882139.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:39.584Z,1478882139.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:39.588Z,1478882139.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:39.949Z,1478882139.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:39.996Z,1478882139.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:40.353Z,1478882140.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:40.762Z,1478882140.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:40.792Z,1478882140.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:41.140Z,1478882141.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:41.545Z,1478882141.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:41.588Z,1478882141.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:41.962Z,1478882141.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:42.340Z,1478882142.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:42.749Z,1478882142.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:43.166Z,1478882143.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:43.544Z,1478882143.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:43.993Z,1478882143.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:44.344Z,1478882144.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:44.801Z,1478882144.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:45.149Z,1478882145.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:45.549Z,1478882145.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:45.940Z,1478882145.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:46.349Z,1478882146.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:46.745Z,1478882146.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:47.144Z,1478882147.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:47.160Z,1478882147.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:47.545Z,1478882147.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:47.943Z,1478882147.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:47.956Z,1478882147.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:48.398Z,1478882148.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:48.749Z,1478882148.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:48.752Z,1478882148.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:49.151Z,1478882149.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:49.540Z,1478882149.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:49.548Z,1478882149.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:49.946Z,1478882149.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:50.341Z,1478882150.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:50.344Z,1478882150.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:50.744Z,1478882150.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:51.140Z,1478882151.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:51.146Z,1478882151.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:51.553Z,1478882151.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:51.936Z,1478882151.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:51.953Z,1478882151.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:52.345Z,1478882152.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:52.732Z,1478882152.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:52.828Z,1478882152.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:53.145Z,1478882153.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:53.528Z,1478882153.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:53.546Z,1478882153.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:53.945Z,1478882153.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:54.325Z,1478882154.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:54.353Z,1478882154.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:54.742Z,1478882154.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:55.121Z,1478882155.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:55.169Z,1478882155.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:55.544Z,1478882155.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:55.918Z,1478882155.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:55.945Z,1478882155.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:56.375Z,1478882156.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:56.714Z,1478882156.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:56.782Z,1478882156.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:57.139Z,1478882157.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:57.148Z,1478882157.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:57.556Z,1478882157.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:57.572Z,1478882157.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:57.949Z,1478882157.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:57.968Z,1478882157.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:58.365Z,1478882158.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:58.377Z,1478882158.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:58.761Z,1478882158.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:58.784Z,1478882158.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:59.173Z,1478882159.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:59.192Z,1478882159.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:59.553Z,1478882159.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:35:59.600Z,1478882159.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:35:59.954Z,1478882159.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:00.008Z,1478882160.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:00.349Z,1478882160.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:00.416Z,1478882160.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:00.753Z,1478882160.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:00.824Z,1478882160.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:01.149Z,1478882161.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:01.444Z,1478882161.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:01.575Z,1478882161.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:01.953Z,1478882161.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:02.240Z,1478882162.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:02.350Z,1478882162.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:02.747Z,1478882162.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:03.036Z,1478882163.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:03.196Z,1478882163.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:03.553Z,1478882163.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:03.568Z,1478882163.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:03.947Z,1478882163.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:04.357Z,1478882164.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:04.364Z,1478882164.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:04.769Z,1478882164.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:05.150Z,1478882165.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:05.160Z,1478882165.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:05.172Z,1478882165.172 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T16:36:05.547Z,1478882165.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:05.884Z,1478882165.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:05.949Z,1478882165.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:06.350Z,1478882166.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:06.680Z,1478882166.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:06.754Z,1478882166.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:07.149Z,1478882167.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:07.476Z,1478882167.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:07.558Z,1478882167.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:07.959Z,1478882167.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:07.976Z,1478882167.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:08.365Z,1478882168.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:08.757Z,1478882168.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:08.772Z,1478882168.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:09.159Z,1478882169.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:09.568Z,1478882169.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:09.976Z,1478882169.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:10.772Z,1478882170.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:11.421Z,1478882171.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:12.216Z,1478882172.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:12.669Z,1478882172.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:12.818Z,1478882172.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:13.012Z,1478882173.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:13.189Z,1478882173.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:13.420Z,1478882173.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:13.615Z,1478882173.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:13.988Z,1478882173.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:14.216Z,1478882174.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:14.418Z,1478882174.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:14.825Z,1478882174.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:15.013Z,1478882175.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:15.188Z,1478882175.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:15.424Z,1478882175.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:15.593Z,1478882175.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:15.987Z,1478882175.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:16.222Z,1478882176.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:16.387Z,1478882176.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:16.793Z,1478882176.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:17.016Z,1478882177.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:17.194Z,1478882177.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:17.504Z,1478882177.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:17.587Z,1478882177.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:17.997Z,1478882177.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:18.300Z,1478882178.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:18.393Z,1478882178.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:18.798Z,1478882178.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:19.096Z,1478882179.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:19.195Z,1478882179.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:19.593Z,1478882179.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:19.880Z,1478882179.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:19.989Z,1478882179.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:20.394Z,1478882180.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:20.676Z,1478882180.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:20.795Z,1478882180.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:21.190Z,1478882181.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:21.472Z,1478882181.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:21.595Z,1478882181.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:21.880Z,1478882181.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:21.995Z,1478882181.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:22.390Z,1478882182.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:22.676Z,1478882182.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:22.789Z,1478882182.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:23.201Z,1478882183.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:23.392Z,1478882183.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:23.590Z,1478882183.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:24.005Z,1478882184.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:24.188Z,1478882184.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:24.396Z,1478882184.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:24.797Z,1478882184.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:24.984Z,1478882184.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:25.201Z,1478882185.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:25.392Z,1478882185.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:25.599Z,1478882185.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:25.000Z,1478882186.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:26.188Z,1478882186.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:26.400Z,1478882186.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:26.854Z,1478882186.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:26.984Z,1478882186.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:27.221Z,1478882187.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:27.392Z,1478882187.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:27.604Z,1478882187.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:28.014Z,1478882188.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:28.188Z,1478882188.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:28.380Z,1478882188.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:28.825Z,1478882188.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:28.984Z,1478882188.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:29.217Z,1478882189.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:29.392Z,1478882189.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:29.580Z,1478882189.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:29.993Z,1478882189.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:30.188Z,1478882190.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:30.386Z,1478882190.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:30.787Z,1478882190.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:30.984Z,1478882190.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:31.194Z,1478882191.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:31.484Z,1478882191.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:31.593Z,1478882191.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:31.996Z,1478882191.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:32.280Z,1478882192.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:32.396Z,1478882192.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:32.799Z,1478882192.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:33.078Z,1478882193.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:33.196Z,1478882193.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:33.597Z,1478882193.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:33.844Z,1478882193.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:33.000Z,1478882194.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:34.393Z,1478882194.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:34.640Z,1478882194.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:34.806Z,1478882194.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:35.200Z,1478882195.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:35.436Z,1478882195.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:35.596Z,1478882195.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:35.844Z,1478882195.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:36.007Z,1478882196.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:36.400Z,1478882196.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:36.640Z,1478882196.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:36.800Z,1478882196.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:37.197Z,1478882197.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:37.436Z,1478882197.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:37.582Z,1478882197.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:37.844Z,1478882197.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:37.986Z,1478882197.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:38.380Z,1478882198.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:38.642Z,1478882198.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:38.785Z,1478882198.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:39.194Z,1478882199.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:39.368Z,1478882199.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:39.593Z,1478882199.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:39.997Z,1478882199.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:40.164Z,1478882200.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:40.387Z,1478882200.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:40.811Z,1478882200.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:40.960Z,1478882200.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:41.218Z,1478882201.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:41.380Z,1478882201.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:41.587Z,1478882201.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:42.027Z,1478882202.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:42.176Z,1478882202.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:42.387Z,1478882202.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:42.823Z,1478882202.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:42.972Z,1478882202.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:43.214Z,1478882203.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:43.380Z,1478882203.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:43.593Z,1478882203.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:43.990Z,1478882203.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:44.176Z,1478882204.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:44.389Z,1478882204.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:44.797Z,1478882204.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:44.974Z,1478882204.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:45.201Z,1478882205.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:45.464Z,1478882205.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:45.589Z,1478882205.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:45.995Z,1478882205.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:46.260Z,1478882206.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:46.396Z,1478882206.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:46.799Z,1478882206.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:47.056Z,1478882207.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:47.199Z,1478882207.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:47.592Z,1478882207.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:47.820Z,1478882207.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:48.005Z,1478882208.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:48.405Z,1478882208.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:48.616Z,1478882208.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:48.811Z,1478882208.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:49.185Z,1478882209.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:49.412Z,1478882209.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:49.585Z,1478882209.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:49.820Z,1478882209.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:49.985Z,1478882209.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:50.385Z,1478882210.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:50.616Z,1478882210.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:50.787Z,1478882210.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:51.186Z,1478882211.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:51.348Z,1478882211.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:51.587Z,1478882211.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:51.993Z,1478882211.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:52.144Z,1478882212.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:52.387Z,1478882212.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:52.787Z,1478882212.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:52.941Z,1478882212.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:53.194Z,1478882213.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:53.348Z,1478882213.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:53.593Z,1478882213.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:53.997Z,1478882213.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:54.144Z,1478882214.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:54.401Z,1478882214.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:54.793Z,1478882214.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:54.940Z,1478882214.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:55.233Z,1478882215.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:55.356Z,1478882215.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:55.633Z,1478882215.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:55.989Z,1478882215.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:56.154Z,1478882216.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:56.387Z,1478882216.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:56.822Z,1478882216.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:56.948Z,1478882216.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:57.188Z,1478882217.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:57.356Z,1478882217.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:57.624Z,1478882217.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:58.027Z,1478882218.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:58.152Z,1478882218.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:58.387Z,1478882218.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:58.797Z,1478882218.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:58.948Z,1478882218.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:59.196Z,1478882219.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:59.452Z,1478882219.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:36:59.588Z,1478882219.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:36:59.997Z,1478882219.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:00.248Z,1478882220.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:00.397Z,1478882220.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:00.790Z,1478882220.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:01.044Z,1478882221.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:01.192Z,1478882221.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:01.595Z,1478882221.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:01.800Z,1478882221.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:01.998Z,1478882221.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:02.393Z,1478882222.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:02.596Z,1478882222.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:02.790Z,1478882222.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:03.190Z,1478882223.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:03.392Z,1478882223.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:03.598Z,1478882223.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:03.800Z,1478882223.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:03.994Z,1478882223.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:04.396Z,1478882224.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:04.596Z,1478882224.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:04.797Z,1478882224.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:05.185Z,1478882225.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:05.332Z,1478882225.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:05.586Z,1478882225.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:05.987Z,1478882225.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:06.128Z,1478882226.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:06.403Z,1478882226.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:06.806Z,1478882226.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:06.924Z,1478882226.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:07.219Z,1478882227.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:07.372Z,1478882227.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:07.600Z,1478882227.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:08.010Z,1478882228.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:08.168Z,1478882228.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:08.393Z,1478882228.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:08.808Z,1478882228.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:08.964Z,1478882228.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:09.222Z,1478882229.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:09.372Z,1478882229.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:10.168Z,1478882230.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:10.964Z,1478882230.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:11.372Z,1478882231.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:12.168Z,1478882232.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:12.965Z,1478882232.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:13.472Z,1478882233.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:14.268Z,1478882234.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:15.064Z,1478882235.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:15.812Z,1478882235.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:16.610Z,1478882236.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:17.423Z,1478882237.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:17.512Z,1478882237.512 [BPC1](ERROR): Failed to receive battery data
2016-11-11T16:37:17.512Z,1478882237.512 [BPC1] Communications Fault, FailCount= 1
2016-11-11T16:37:17.512Z,1478882237.512 [BPC1](ERROR): Communications Fault
2016-11-11T16:37:17.521Z,1478882237.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:17.542Z,1478882237.542 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T16:37:17.653Z,1478882237.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:17.832Z,1478882237.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:18.005Z,1478882238.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:18.387Z,1478882238.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:18.407Z,1478882238.407 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:37:18.407Z,1478882238.407 [BPC1] No Fault, FailCount= 1
2016-11-11T16:37:18.628Z,1478882238.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:18.882Z,1478882238.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:19.210Z,1478882239.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:19.320Z,1478882239.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:19.587Z,1478882239.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:20.089Z,1478882240.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:20.116Z,1478882240.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:20.393Z,1478882240.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:20.793Z,1478882240.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:20.912Z,1478882240.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:21.208Z,1478882241.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:21.320Z,1478882241.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:21.587Z,1478882241.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:21.990Z,1478882241.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:22.116Z,1478882242.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:22.388Z,1478882242.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:22.810Z,1478882242.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:22.912Z,1478882242.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:23.193Z,1478882243.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:23.328Z,1478882243.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:23.593Z,1478882243.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:23.991Z,1478882243.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:24.124Z,1478882244.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:24.384Z,1478882244.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:24.788Z,1478882244.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:24.920Z,1478882244.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:25.193Z,1478882245.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:25.328Z,1478882245.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:25.593Z,1478882245.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:25.992Z,1478882245.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:26.124Z,1478882246.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:26.393Z,1478882246.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:26.797Z,1478882246.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:26.920Z,1478882246.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:27.193Z,1478882247.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:27.396Z,1478882247.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:27.591Z,1478882247.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:27.993Z,1478882247.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:28.192Z,1478882248.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:28.397Z,1478882248.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:28.814Z,1478882248.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:28.988Z,1478882248.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:29.197Z,1478882249.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:29.593Z,1478882249.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:29.760Z,1478882249.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:29.993Z,1478882249.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:30.401Z,1478882250.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:30.556Z,1478882250.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:30.856Z,1478882250.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:31.227Z,1478882251.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:31.352Z,1478882251.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:31.603Z,1478882251.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:31.760Z,1478882251.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:32.020Z,1478882252.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:32.417Z,1478882252.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:32.556Z,1478882252.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:32.805Z,1478882252.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:33.222Z,1478882253.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:33.336Z,1478882253.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:33.617Z,1478882253.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:34.005Z,1478882254.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:34.132Z,1478882254.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:34.425Z,1478882254.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:34.851Z,1478882254.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:34.928Z,1478882254.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:35.199Z,1478882255.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:35.348Z,1478882255.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:35.619Z,1478882255.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:36.012Z,1478882256.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:36.144Z,1478882256.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:36.411Z,1478882256.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:36.879Z,1478882256.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:36.940Z,1478882256.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:37.209Z,1478882257.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:37.348Z,1478882257.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:37.607Z,1478882257.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:38.050Z,1478882258.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:38.144Z,1478882258.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:38.421Z,1478882258.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:38.789Z,1478882258.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:38.940Z,1478882258.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:39.227Z,1478882259.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:39.348Z,1478882259.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:39.603Z,1478882259.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:40.009Z,1478882260.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:40.144Z,1478882260.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:40.420Z,1478882260.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:40.803Z,1478882260.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:40.941Z,1478882260.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:41.220Z,1478882261.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:41.404Z,1478882261.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:41.610Z,1478882261.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:42.015Z,1478882262.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:42.200Z,1478882262.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:42.415Z,1478882262.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:42.806Z,1478882262.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:42.996Z,1478882262.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:43.213Z,1478882263.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:43.619Z,1478882263.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:43.756Z,1478882263.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:44.016Z,1478882264.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:44.426Z,1478882264.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:44.552Z,1478882264.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:44.817Z,1478882264.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:45.218Z,1478882265.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:45.348Z,1478882265.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:45.689Z,1478882265.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:45.772Z,1478882265.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:46.021Z,1478882266.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:46.441Z,1478882266.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:46.568Z,1478882266.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:46.910Z,1478882266.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:47.217Z,1478882267.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:47.268Z,1478882267.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:47.625Z,1478882267.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:48.019Z,1478882268.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:48.064Z,1478882268.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:48.407Z,1478882268.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:48.860Z,1478882268.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:48.954Z,1478882268.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:49.203Z,1478882269.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:49.356Z,1478882269.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:49.625Z,1478882269.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:50.026Z,1478882270.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:50.152Z,1478882270.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:50.437Z,1478882270.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:50.919Z,1478882270.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:50.948Z,1478882270.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:51.191Z,1478882271.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:51.356Z,1478882271.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:51.610Z,1478882271.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:51.995Z,1478882271.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:52.152Z,1478882272.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:52.397Z,1478882272.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:52.855Z,1478882272.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:52.948Z,1478882272.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:53.205Z,1478882273.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:53.356Z,1478882273.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:53.608Z,1478882273.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:53.989Z,1478882273.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:54.153Z,1478882274.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:54.411Z,1478882274.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:54.813Z,1478882274.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:54.948Z,1478882274.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:55.198Z,1478882275.198 [PNI_TCM](ERROR): CRC does not match. Expected:0x63309 got:0x38009
2016-11-11T16:37:55.237Z,1478882275.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:55.356Z,1478882275.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:55.610Z,1478882275.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:56.009Z,1478882276.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:56.152Z,1478882276.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:56.414Z,1478882276.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:56.791Z,1478882276.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:56.950Z,1478882276.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:57.190Z,1478882277.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:57.605Z,1478882277.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:57.724Z,1478882277.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:58.006Z,1478882278.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:58.390Z,1478882278.390 [PNI_TCM](ERROR): CRC does not match. Expected:0x41871 got:0x59072
2016-11-11T16:37:58.410Z,1478882278.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:58.520Z,1478882278.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:58.803Z,1478882278.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:59.207Z,1478882279.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:59.316Z,1478882279.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:59.609Z,1478882279.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:37:59.740Z,1478882279.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:37:59.981Z,1478882279.981 [PNI_TCM](ERROR): CRC does not match. Expected:0x25808 got:0x48992
2016-11-11T16:38:00.025Z,1478882280.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:00.429Z,1478882280.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:00.536Z,1478882280.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:00.846Z,1478882280.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:01.226Z,1478882281.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:01.284Z,1478882281.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:01.599Z,1478882281.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:02.033Z,1478882282.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:02.080Z,1478882282.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:02.423Z,1478882282.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:02.837Z,1478882282.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:02.876Z,1478882282.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:03.198Z,1478882283.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:03.284Z,1478882283.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:03.595Z,1478882283.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:03.997Z,1478882283.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:04.080Z,1478882284.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:04.391Z,1478882284.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:04.827Z,1478882284.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:04.876Z,1478882284.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:05.188Z,1478882285.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:05.592Z,1478882285.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:05.672Z,1478882285.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:05.990Z,1478882285.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:06.393Z,1478882286.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:06.500Z,1478882286.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:06.806Z,1478882286.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:07.191Z,1478882287.191 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:07.191Z,1478882287.191 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 216
2016-11-11T16:38:07.192Z,1478882287.192 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:38:07.198Z,1478882287.198 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:07.198Z,1478882287.198 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 216
2016-11-11T16:38:07.198Z,1478882287.198 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:38:07.200Z,1478882287.200 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:07.200Z,1478882287.200 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 216
2016-11-11T16:38:07.200Z,1478882287.200 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:38:07.214Z,1478882287.214 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:38:07.214Z,1478882287.214 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:38:07.215Z,1478882287.215 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:38:07.296Z,1478882287.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:07.623Z,1478882287.623 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:38:07.623Z,1478882287.623 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 216
2016-11-11T16:38:07.624Z,1478882287.624 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:38:07.624Z,1478882287.624 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 216
2016-11-11T16:38:07.625Z,1478882287.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:38:07.625Z,1478882287.625 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 216
2016-11-11T16:38:07.989Z,1478882287.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:38:07.989Z,1478882287.989 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:38:07.989Z,1478882287.990 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:38:07.994Z,1478882287.994 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:38:07.995Z,1478882287.995 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:38:07.995Z,1478882287.995 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:38:07.996Z,1478882287.996 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:38:07.996Z,1478882287.996 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:38:07.997Z,1478882287.997 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:38:08.092Z,1478882288.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:08.398Z,1478882288.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:08.788Z,1478882288.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:08.888Z,1478882288.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:09.195Z,1478882289.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:09.684Z,1478882289.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:10.480Z,1478882290.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:11.276Z,1478882291.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:12.072Z,1478882292.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:12.421Z,1478882292.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:12.545Z,1478882292.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:12.871Z,1478882292.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:12.892Z,1478882292.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:13.299Z,1478882293.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:13.672Z,1478882293.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:13.691Z,1478882293.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:14.110Z,1478882294.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:14.471Z,1478882294.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:14.517Z,1478882294.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:14.886Z,1478882294.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:15.271Z,1478882295.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:15.314Z,1478882295.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:15.707Z,1478882295.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:16.071Z,1478882296.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:16.125Z,1478882296.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:16.480Z,1478882296.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:16.522Z,1478882296.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:16.888Z,1478882296.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:16.905Z,1478882296.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:17.290Z,1478882297.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:17.296Z,1478882297.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:17.701Z,1478882297.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:17.704Z,1478882297.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:18.101Z,1478882298.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:18.112Z,1478882298.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:18.498Z,1478882298.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:18.520Z,1478882298.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:18.928Z,1478882298.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:18.956Z,1478882298.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:19.314Z,1478882299.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:19.336Z,1478882299.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:19.700Z,1478882299.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:20.094Z,1478882300.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:20.132Z,1478882300.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:20.507Z,1478882300.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:20.895Z,1478882300.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:20.928Z,1478882300.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:21.303Z,1478882301.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:21.336Z,1478882301.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:21.716Z,1478882301.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:22.102Z,1478882302.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:22.132Z,1478882302.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:22.548Z,1478882302.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:22.928Z,1478882302.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:22.967Z,1478882302.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:23.301Z,1478882303.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:23.364Z,1478882303.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:23.705Z,1478882303.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:24.145Z,1478882304.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:24.160Z,1478882304.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:24.508Z,1478882304.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:24.898Z,1478882304.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:24.956Z,1478882304.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:25.327Z,1478882305.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:25.690Z,1478882305.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:25.720Z,1478882305.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:26.122Z,1478882306.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:26.490Z,1478882306.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:26.517Z,1478882306.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:26.895Z,1478882306.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:27.312Z,1478882307.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:27.322Z,1478882307.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:27.703Z,1478882307.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:27.720Z,1478882307.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:28.110Z,1478882308.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:28.516Z,1478882308.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:28.549Z,1478882308.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:28.902Z,1478882308.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:29.196Z,1478882309.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:29.331Z,1478882309.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:29.703Z,1478882309.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:29.992Z,1478882309.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:30.137Z,1478882310.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:30.495Z,1478882310.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:30.788Z,1478882310.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:30.938Z,1478882310.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:31.196Z,1478882311.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:31.304Z,1478882311.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:31.702Z,1478882311.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:31.992Z,1478882311.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:32.104Z,1478882312.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:32.504Z,1478882312.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:32.788Z,1478882312.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:32.902Z,1478882312.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:33.196Z,1478882313.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:33.302Z,1478882313.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:33.702Z,1478882313.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:33.992Z,1478882313.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:34.101Z,1478882314.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:34.503Z,1478882314.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:34.788Z,1478882314.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:34.909Z,1478882314.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:35.196Z,1478882315.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:35.347Z,1478882315.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:35.709Z,1478882315.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:35.992Z,1478882315.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:36.100Z,1478882316.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:36.499Z,1478882316.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:36.788Z,1478882316.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:36.926Z,1478882316.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:37.307Z,1478882317.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:37.344Z,1478882317.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:37.702Z,1478882317.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:38.108Z,1478882318.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:38.140Z,1478882318.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:38.519Z,1478882318.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:38.910Z,1478882318.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:38.936Z,1478882318.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:39.338Z,1478882319.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:39.652Z,1478882319.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:39.708Z,1478882319.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:40.110Z,1478882320.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:40.448Z,1478882320.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:40.507Z,1478882320.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:40.944Z,1478882320.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:41.265Z,1478882321.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:41.325Z,1478882321.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:41.693Z,1478882321.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:41.716Z,1478882321.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:42.106Z,1478882322.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:42.502Z,1478882322.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:42.512Z,1478882322.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:42.945Z,1478882322.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:43.172Z,1478882323.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:43.337Z,1478882323.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:43.695Z,1478882323.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:43.968Z,1478882323.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:44.118Z,1478882324.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:44.503Z,1478882324.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:44.764Z,1478882324.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:44.949Z,1478882324.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:45.172Z,1478882325.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:45.322Z,1478882325.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:45.703Z,1478882325.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:45.968Z,1478882325.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:46.098Z,1478882326.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:46.508Z,1478882326.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:46.764Z,1478882326.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:46.908Z,1478882326.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:47.172Z,1478882327.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:47.308Z,1478882327.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:47.708Z,1478882327.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:47.968Z,1478882327.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:48.108Z,1478882328.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:48.486Z,1478882328.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:48.764Z,1478882328.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:48.910Z,1478882328.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:49.172Z,1478882329.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:49.302Z,1478882329.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:49.689Z,1478882329.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:49.968Z,1478882329.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:50.093Z,1478882330.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:50.489Z,1478882330.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:50.764Z,1478882330.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:50.928Z,1478882330.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:51.297Z,1478882331.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:51.304Z,1478882331.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:51.701Z,1478882331.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:52.100Z,1478882332.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:52.145Z,1478882332.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:52.512Z,1478882332.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:52.896Z,1478882332.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:52.911Z,1478882332.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:53.301Z,1478882333.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:53.624Z,1478882333.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:53.706Z,1478882333.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:54.099Z,1478882334.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:54.420Z,1478882334.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:54.499Z,1478882334.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:54.897Z,1478882334.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:55.217Z,1478882335.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:55.316Z,1478882335.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:55.624Z,1478882335.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:55.704Z,1478882335.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:56.141Z,1478882336.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:56.420Z,1478882336.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:56.499Z,1478882336.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:56.910Z,1478882336.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:57.152Z,1478882337.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:57.309Z,1478882337.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:57.789Z,1478882337.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:57.948Z,1478882337.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:58.109Z,1478882338.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:58.525Z,1478882338.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:58.744Z,1478882338.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:58.906Z,1478882338.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:59.152Z,1478882339.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:38:59.344Z,1478882339.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:59.726Z,1478882339.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:38:59.948Z,1478882339.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:00.071Z,1478882340.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:00.106Z,1478882340.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:00.471Z,1478882340.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:00.507Z,1478882340.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:00.744Z,1478882340.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:00.879Z,1478882340.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:00.905Z,1478882340.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:01.152Z,1478882341.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:01.271Z,1478882341.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:01.308Z,1478882341.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:01.670Z,1478882341.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:01.702Z,1478882341.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:01.948Z,1478882341.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:02.074Z,1478882342.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:02.089Z,1478882342.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:02.474Z,1478882342.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:02.519Z,1478882342.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:02.745Z,1478882342.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:02.879Z,1478882342.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:02.894Z,1478882342.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:03.156Z,1478882343.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:03.279Z,1478882343.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:03.294Z,1478882343.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:03.697Z,1478882343.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:03.952Z,1478882343.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:04.099Z,1478882344.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:04.503Z,1478882344.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:04.748Z,1478882344.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:04.913Z,1478882344.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:05.303Z,1478882345.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:05.352Z,1478882345.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:05.711Z,1478882345.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:06.094Z,1478882346.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:06.148Z,1478882346.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:06.499Z,1478882346.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:06.901Z,1478882346.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:06.944Z,1478882346.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:07.303Z,1478882347.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:07.604Z,1478882347.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:07.704Z,1478882347.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:08.104Z,1478882348.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:08.400Z,1478882348.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:08.507Z,1478882348.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:08.924Z,1478882348.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:09.196Z,1478882349.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:09.330Z,1478882349.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:09.604Z,1478882349.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:10.400Z,1478882350.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:11.148Z,1478882351.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:11.945Z,1478882351.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:12.740Z,1478882352.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:12.837Z,1478882352.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:12.989Z,1478882352.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:13.156Z,1478882353.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:13.349Z,1478882353.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:13.784Z,1478882353.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:13.952Z,1478882353.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:14.143Z,1478882354.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:14.590Z,1478882354.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:14.748Z,1478882354.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:14.973Z,1478882354.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:15.156Z,1478882355.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:15.356Z,1478882355.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:15.758Z,1478882355.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:15.952Z,1478882355.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:16.157Z,1478882356.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:16.548Z,1478882356.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:16.748Z,1478882356.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:16.960Z,1478882356.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:17.156Z,1478882357.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:17.338Z,1478882357.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:17.737Z,1478882357.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:17.952Z,1478882357.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:18.141Z,1478882358.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:18.541Z,1478882358.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:18.748Z,1478882358.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:18.950Z,1478882358.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:19.220Z,1478882359.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:19.344Z,1478882359.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:19.746Z,1478882359.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:20.016Z,1478882360.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:20.189Z,1478882360.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:20.550Z,1478882360.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:20.812Z,1478882360.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:20.956Z,1478882360.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:21.344Z,1478882361.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:21.580Z,1478882361.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:21.745Z,1478882361.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:22.145Z,1478882362.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:22.376Z,1478882362.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:22.557Z,1478882362.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:22.956Z,1478882362.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:23.172Z,1478882363.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:23.355Z,1478882363.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:23.580Z,1478882363.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:23.749Z,1478882363.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:24.155Z,1478882364.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:24.376Z,1478882364.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:24.555Z,1478882364.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:24.956Z,1478882364.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:25.108Z,1478882365.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:25.353Z,1478882365.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:25.757Z,1478882365.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:25.904Z,1478882365.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:26.136Z,1478882366.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:26.543Z,1478882366.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:26.700Z,1478882366.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:26.948Z,1478882366.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:27.112Z,1478882367.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:27.381Z,1478882367.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:27.743Z,1478882367.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:27.908Z,1478882367.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:28.178Z,1478882368.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:28.544Z,1478882368.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:28.704Z,1478882368.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:28.981Z,1478882368.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:29.112Z,1478882369.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:29.374Z,1478882369.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:29.746Z,1478882369.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:29.908Z,1478882369.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:30.153Z,1478882370.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:30.554Z,1478882370.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:30.704Z,1478882370.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:30.969Z,1478882370.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:31.112Z,1478882371.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:31.361Z,1478882371.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:31.763Z,1478882371.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:31.908Z,1478882371.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:32.136Z,1478882372.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:32.541Z,1478882372.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:32.704Z,1478882372.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:32.967Z,1478882372.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:33.200Z,1478882373.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:33.336Z,1478882373.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:33.741Z,1478882373.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:33.996Z,1478882373.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:34.157Z,1478882374.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:34.546Z,1478882374.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:34.792Z,1478882374.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:34.951Z,1478882374.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:35.353Z,1478882375.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:35.560Z,1478882375.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:35.746Z,1478882375.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:36.152Z,1478882376.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:36.356Z,1478882376.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:36.564Z,1478882376.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:36.946Z,1478882376.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:37.152Z,1478882377.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:37.353Z,1478882377.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:37.560Z,1478882377.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:37.746Z,1478882377.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:38.150Z,1478882378.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:38.356Z,1478882378.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:38.545Z,1478882378.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:38.937Z,1478882378.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:39.094Z,1478882379.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:39.341Z,1478882379.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:39.781Z,1478882379.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:39.888Z,1478882379.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:40.143Z,1478882380.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:40.545Z,1478882380.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:40.684Z,1478882380.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:40.957Z,1478882380.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:41.092Z,1478882381.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:41.362Z,1478882381.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:41.751Z,1478882381.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:41.888Z,1478882381.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:42.187Z,1478882382.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:42.544Z,1478882382.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:42.684Z,1478882382.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:42.977Z,1478882382.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:43.092Z,1478882383.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:43.362Z,1478882383.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:43.755Z,1478882383.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:43.888Z,1478882383.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:44.156Z,1478882384.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:44.556Z,1478882384.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:44.684Z,1478882384.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:44.938Z,1478882384.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:45.092Z,1478882385.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:45.345Z,1478882385.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:45.787Z,1478882385.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:45.888Z,1478882385.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:46.139Z,1478882386.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:46.544Z,1478882386.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:46.684Z,1478882386.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:46.944Z,1478882386.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:47.180Z,1478882387.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:47.370Z,1478882387.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:47.748Z,1478882387.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:47.976Z,1478882387.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:48.142Z,1478882388.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:48.549Z,1478882388.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:48.774Z,1478882388.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:48.946Z,1478882388.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:49.357Z,1478882389.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:49.540Z,1478882389.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:49.749Z,1478882389.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:50.155Z,1478882390.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:50.336Z,1478882390.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:50.546Z,1478882390.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:50.960Z,1478882390.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:51.132Z,1478882391.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:51.356Z,1478882391.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:51.540Z,1478882391.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:51.757Z,1478882391.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:52.146Z,1478882392.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:52.336Z,1478882392.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:52.557Z,1478882392.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:52.945Z,1478882392.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:53.084Z,1478882393.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:53.349Z,1478882393.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:53.795Z,1478882393.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:53.880Z,1478882393.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:54.149Z,1478882394.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:54.552Z,1478882394.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:54.676Z,1478882394.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:54.954Z,1478882394.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:55.088Z,1478882395.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:55.352Z,1478882395.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:55.783Z,1478882395.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:55.884Z,1478882395.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:56.145Z,1478882396.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:56.564Z,1478882396.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:56.680Z,1478882396.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:56.974Z,1478882396.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:57.088Z,1478882397.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:57.343Z,1478882397.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:57.774Z,1478882397.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:57.884Z,1478882397.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:58.178Z,1478882398.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:58.574Z,1478882398.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:58.680Z,1478882398.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:58.953Z,1478882398.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:59.112Z,1478882399.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:39:59.349Z,1478882399.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:59.752Z,1478882399.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:39:59.908Z,1478882399.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:00.153Z,1478882400.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:00.551Z,1478882400.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:00.721Z,1478882400.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:00.953Z,1478882400.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:01.160Z,1478882401.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:01.355Z,1478882401.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:01.758Z,1478882401.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:01.956Z,1478882401.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:02.162Z,1478882402.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:02.563Z,1478882402.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:02.752Z,1478882402.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:02.961Z,1478882402.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:03.336Z,1478882403.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:03.516Z,1478882403.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:03.780Z,1478882403.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:04.139Z,1478882404.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:04.312Z,1478882404.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:04.540Z,1478882404.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:04.944Z,1478882404.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:05.109Z,1478882405.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:05.347Z,1478882405.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:05.520Z,1478882405.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:05.748Z,1478882405.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:06.142Z,1478882406.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:06.316Z,1478882406.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:06.557Z,1478882406.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:06.937Z,1478882406.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:07.064Z,1478882407.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:07.341Z,1478882407.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:07.745Z,1478882407.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:07.861Z,1478882407.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:08.148Z,1478882408.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:08.544Z,1478882408.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:08.656Z,1478882408.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:08.962Z,1478882408.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:08.984Z,1478882408.984 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T16:40:08.985Z,1478882408.985 [Default:CheckIn:C.Wait] Stopped
2016-11-11T16:40:08.985Z,1478882408.985 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T16:40:08.985Z,1478882408.985 [Default:CheckIn:D] Running Loop=1
2016-11-11T16:40:09.064Z,1478882409.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:09.345Z,1478882409.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:09.354Z,1478882409.354 [Default:CheckIn:D] Stopped
2016-11-11T16:40:09.354Z,1478882409.354 [Default:CheckIn:E] Running Loop=1
2016-11-11T16:40:09.860Z,1478882409.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:10.656Z,1478882410.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:11.064Z,1478882411.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:11.860Z,1478882411.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:12.656Z,1478882412.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:12.805Z,1478882412.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:12.814Z,1478882412.814 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 710.134049 min 
2016-11-11T16:40:12.815Z,1478882412.815 [Default:CheckIn:E] Stopped
2016-11-11T16:40:12.815Z,1478882412.815 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T16:40:12.815Z,1478882412.815 [Default:CheckIn] Stopped
2016-11-11T16:40:12.815Z,1478882412.815 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T16:40:12.815Z,1478882412.815 [Default:CheckIn](INFO): Running loop #69
2016-11-11T16:40:12.816Z,1478882412.816 [Default:CheckIn] Running Loop=69
2016-11-11T16:40:12.816Z,1478882412.816 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T16:40:12.816Z,1478882412.816 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T16:40:12.951Z,1478882412.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:13.064Z,1478882413.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:13.260Z,1478882413.260 [NAL9602](INFO): Powering up
2016-11-11T16:40:13.294Z,1478882413.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:13.724Z,1478882413.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:13.860Z,1478882413.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:14.094Z,1478882414.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:14.533Z,1478882414.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:14.659Z,1478882414.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:14.973Z,1478882414.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:15.128Z,1478882415.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:15.325Z,1478882415.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:15.697Z,1478882415.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:15.924Z,1478882415.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:16.097Z,1478882416.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:16.496Z,1478882416.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:16.720Z,1478882416.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:16.908Z,1478882416.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:17.304Z,1478882417.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:17.484Z,1478882417.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:17.704Z,1478882417.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:18.113Z,1478882418.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:18.282Z,1478882418.282 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:18.513Z,1478882418.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:18.923Z,1478882418.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:19.076Z,1478882419.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:19.307Z,1478882419.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:19.484Z,1478882419.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:19.713Z,1478882419.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:20.107Z,1478882420.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:20.280Z,1478882420.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:20.534Z,1478882420.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:20.900Z,1478882420.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:21.068Z,1478882421.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:21.303Z,1478882421.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:21.712Z,1478882421.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:21.864Z,1478882421.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:22.105Z,1478882422.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:22.501Z,1478882422.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:22.660Z,1478882422.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:22.917Z,1478882422.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:23.068Z,1478882423.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:23.296Z,1478882423.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:23.705Z,1478882423.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:23.864Z,1478882423.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:24.114Z,1478882424.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:24.453Z,1478882424.453 [NAL9602](INFO): NAL9602 initialized
2016-11-11T16:40:24.517Z,1478882424.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:24.660Z,1478882424.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:24.911Z,1478882424.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:25.068Z,1478882425.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:25.257Z,1478882425.257 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T16:40:25.257Z,1478882425.257 [NAL9602] Data Fault, FailCount= 4
2016-11-11T16:40:25.257Z,1478882425.257 [NAL9602](ERROR): Data Fault
2016-11-11T16:40:25.321Z,1478882425.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:25.368Z,1478882425.368 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T16:40:25.661Z,1478882425.661 [NAL9602](INFO): Powering down
2016-11-11T16:40:25.696Z,1478882425.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:25.864Z,1478882425.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:26.124Z,1478882426.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:26.496Z,1478882426.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:26.554Z,1478882426.554 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T16:40:26.555Z,1478882426.555 [NAL9602] No Fault, FailCount= 4
2016-11-11T16:40:26.660Z,1478882426.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:26.901Z,1478882426.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:27.068Z,1478882427.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:27.341Z,1478882427.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:27.701Z,1478882427.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:27.864Z,1478882427.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:28.110Z,1478882428.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:28.498Z,1478882428.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:28.661Z,1478882428.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:28.946Z,1478882428.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:29.104Z,1478882429.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:29.324Z,1478882429.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:29.686Z,1478882429.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:29.900Z,1478882429.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:30.089Z,1478882430.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:30.493Z,1478882430.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:30.696Z,1478882430.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:30.860Z,1478882430.860 [NAL9602](INFO): Powering up NAL9602
2016-11-11T16:40:30.894Z,1478882430.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:31.309Z,1478882431.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:31.468Z,1478882431.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:31.755Z,1478882431.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:32.104Z,1478882432.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:32.266Z,1478882432.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:32.504Z,1478882432.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:32.896Z,1478882432.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:33.060Z,1478882433.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:33.297Z,1478882433.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:33.468Z,1478882433.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:33.705Z,1478882433.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:34.105Z,1478882434.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:34.264Z,1478882434.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:34.504Z,1478882434.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:34.912Z,1478882434.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:35.016Z,1478882435.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:35.314Z,1478882435.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:35.753Z,1478882435.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:35.812Z,1478882435.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:36.113Z,1478882436.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:36.511Z,1478882436.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:36.608Z,1478882436.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:36.908Z,1478882436.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:37.024Z,1478882437.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:37.342Z,1478882437.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:37.737Z,1478882437.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:37.821Z,1478882437.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:38.101Z,1478882438.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:38.550Z,1478882438.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:38.616Z,1478882438.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:38.873Z,1478882438.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:38.897Z,1478882438.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:39.028Z,1478882439.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:39.281Z,1478882439.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:39.296Z,1478882439.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:39.677Z,1478882439.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:39.743Z,1478882439.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:39.824Z,1478882439.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:40.071Z,1478882440.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:40.105Z,1478882440.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:40.471Z,1478882440.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:40.510Z,1478882440.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:40.621Z,1478882440.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:40.871Z,1478882440.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:40.905Z,1478882440.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:41.028Z,1478882441.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:41.271Z,1478882441.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:41.286Z,1478882441.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:41.682Z,1478882441.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:41.741Z,1478882441.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:41.824Z,1478882441.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:42.053Z,1478882442.053 [NAL9602](INFO): NAL9602 initialized
2016-11-11T16:40:42.072Z,1478882442.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:42.112Z,1478882442.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:42.478Z,1478882442.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:42.525Z,1478882442.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:42.626Z,1478882442.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:42.885Z,1478882442.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:42.905Z,1478882442.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:43.088Z,1478882443.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:43.286Z,1478882443.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:43.329Z,1478882443.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:43.689Z,1478882443.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:43.749Z,1478882443.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:43.884Z,1478882443.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:44.080Z,1478882444.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:44.096Z,1478882444.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:44.472Z,1478882444.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:44.510Z,1478882444.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:44.680Z,1478882444.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:44.880Z,1478882444.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:44.907Z,1478882444.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:45.282Z,1478882445.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:45.301Z,1478882445.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:45.444Z,1478882445.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:45.686Z,1478882445.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:45.701Z,1478882445.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:46.086Z,1478882446.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:46.101Z,1478882446.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:46.240Z,1478882446.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:46.480Z,1478882446.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:46.496Z,1478882446.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:46.872Z,1478882446.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:46.910Z,1478882446.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:47.036Z,1478882447.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:47.313Z,1478882447.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:47.448Z,1478882447.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:47.694Z,1478882447.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:48.101Z,1478882448.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:48.244Z,1478882448.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:48.595Z,1478882448.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:48.932Z,1478882448.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:49.016Z,1478882449.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:49.314Z,1478882449.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:49.706Z,1478882449.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:49.812Z,1478882449.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:50.104Z,1478882450.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:50.487Z,1478882450.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:50.608Z,1478882450.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:50.898Z,1478882450.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:51.016Z,1478882451.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:51.321Z,1478882451.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:51.706Z,1478882451.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:51.813Z,1478882451.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:52.141Z,1478882452.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:52.546Z,1478882452.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:52.608Z,1478882452.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:52.910Z,1478882452.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:53.016Z,1478882453.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:53.319Z,1478882453.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:53.742Z,1478882453.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:53.812Z,1478882453.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:54.129Z,1478882454.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:54.517Z,1478882454.517 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T16:40:54.590Z,1478882454.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:54.608Z,1478882454.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:54.911Z,1478882454.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:55.016Z,1478882455.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:55.308Z,1478882455.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:55.749Z,1478882455.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:55.812Z,1478882455.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:56.096Z,1478882456.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:56.525Z,1478882456.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:56.613Z,1478882456.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:56.887Z,1478882456.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:57.064Z,1478882457.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:57.350Z,1478882457.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:57.721Z,1478882457.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:57.860Z,1478882457.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:58.090Z,1478882458.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:58.513Z,1478882458.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:58.656Z,1478882458.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:58.898Z,1478882458.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:59.314Z,1478882459.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:40:59.436Z,1478882459.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:40:59.702Z,1478882459.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:00.114Z,1478882460.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:00.232Z,1478882460.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:00.489Z,1478882460.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:00.896Z,1478882460.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:01.028Z,1478882461.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:01.307Z,1478882461.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:01.440Z,1478882461.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:01.717Z,1478882461.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:02.107Z,1478882462.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:02.236Z,1478882462.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:02.549Z,1478882462.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:02.923Z,1478882462.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:02.976Z,1478882462.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:03.318Z,1478882463.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:03.697Z,1478882463.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:03.772Z,1478882463.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:04.054Z,1478882464.054 [NAL9602](INFO): SBD MO Status=2, MOMSN=351, MT Status=2, MTMSN=0
2016-11-11T16:41:04.054Z,1478882464.054 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T16:41:04.102Z,1478882464.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:04.568Z,1478882464.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:04.576Z,1478882464.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:04.921Z,1478882464.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:04.988Z,1478882464.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:05.325Z,1478882465.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:05.709Z,1478882465.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:05.784Z,1478882465.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:06.104Z,1478882466.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:06.577Z,1478882466.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:06.580Z,1478882466.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:06.921Z,1478882466.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:06.993Z,1478882466.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:07.312Z,1478882467.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:07.707Z,1478882467.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:07.788Z,1478882467.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:08.137Z,1478882468.137 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:08.137Z,1478882468.137 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 217
2016-11-11T16:41:08.137Z,1478882468.137 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:41:08.144Z,1478882468.144 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:08.144Z,1478882468.144 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 217
2016-11-11T16:41:08.144Z,1478882468.144 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:41:08.146Z,1478882468.146 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:08.146Z,1478882468.146 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 217
2016-11-11T16:41:08.146Z,1478882468.146 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:41:08.183Z,1478882468.183 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:41:08.187Z,1478882468.187 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:41:08.188Z,1478882468.188 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:41:08.545Z,1478882468.545 [PNI_TCM](ERROR): CRC does not match. Expected:0x3710 got:0x47111
2016-11-11T16:41:08.586Z,1478882468.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:08.622Z,1478882468.622 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:41:08.622Z,1478882468.622 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 217
2016-11-11T16:41:08.623Z,1478882468.623 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:41:08.623Z,1478882468.623 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 217
2016-11-11T16:41:08.628Z,1478882468.628 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:41:08.628Z,1478882468.628 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 217
2016-11-11T16:41:08.936Z,1478882468.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:41:08.937Z,1478882468.937 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:41:08.937Z,1478882468.937 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:41:08.950Z,1478882468.950 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:41:08.950Z,1478882468.950 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:41:08.951Z,1478882468.951 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:41:08.959Z,1478882468.959 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:41:08.960Z,1478882468.960 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:41:08.960Z,1478882468.960 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:41:08.000Z,1478882469.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:09.297Z,1478882469.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:09.737Z,1478882469.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:09.796Z,1478882469.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:10.592Z,1478882470.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:11.060Z,1478882471.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:11.856Z,1478882471.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:12.652Z,1478882472.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:13.237Z,1478882473.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:13.393Z,1478882473.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:13.412Z,1478882473.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:13.712Z,1478882473.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:14.117Z,1478882474.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:14.208Z,1478882474.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:14.549Z,1478882474.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:14.917Z,1478882474.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:15.004Z,1478882475.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:15.342Z,1478882475.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:15.436Z,1478882475.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:15.741Z,1478882475.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:16.129Z,1478882476.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:16.232Z,1478882476.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:16.583Z,1478882476.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:16.925Z,1478882476.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:16.976Z,1478882476.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:17.313Z,1478882477.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:17.720Z,1478882477.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:17.772Z,1478882477.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:18.115Z,1478882478.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:18.568Z,1478882478.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:18.624Z,1478882478.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:18.915Z,1478882478.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:19.020Z,1478882479.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:19.314Z,1478882479.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:19.717Z,1478882479.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:19.816Z,1478882479.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:20.121Z,1478882480.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:20.560Z,1478882480.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:20.612Z,1478882480.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:20.914Z,1478882480.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:21.020Z,1478882481.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:21.321Z,1478882481.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:21.766Z,1478882481.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:21.816Z,1478882481.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:22.136Z,1478882482.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:22.552Z,1478882482.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:22.612Z,1478882482.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:22.924Z,1478882482.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:23.020Z,1478882483.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:23.324Z,1478882483.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:23.726Z,1478882483.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:23.816Z,1478882483.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:24.126Z,1478882484.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:24.523Z,1478882484.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:24.613Z,1478882484.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:24.924Z,1478882484.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:24.946Z,1478882484.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:25.044Z,1478882485.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:25.301Z,1478882485.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:25.338Z,1478882485.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:25.726Z,1478882485.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:25.761Z,1478882485.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:25.840Z,1478882485.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:26.095Z,1478882486.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:26.149Z,1478882486.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:26.501Z,1478882486.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:26.530Z,1478882486.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:26.636Z,1478882486.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:26.913Z,1478882486.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:26.984Z,1478882486.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:27.326Z,1478882487.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:27.376Z,1478882487.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:27.420Z,1478882487.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:27.693Z,1478882487.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:27.745Z,1478882487.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:28.089Z,1478882488.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:28.125Z,1478882488.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:28.216Z,1478882488.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:28.494Z,1478882488.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:28.541Z,1478882488.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:28.900Z,1478882488.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:28.998Z,1478882488.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:29.012Z,1478882489.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:29.308Z,1478882489.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:29.351Z,1478882489.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:29.424Z,1478882489.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:29.696Z,1478882489.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:29.711Z,1478882489.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:30.097Z,1478882490.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:30.151Z,1478882490.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:30.220Z,1478882490.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:30.511Z,1478882490.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:30.547Z,1478882490.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:30.916Z,1478882490.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:30.964Z,1478882490.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:31.322Z,1478882491.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:31.710Z,1478882491.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:31.760Z,1478882491.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:32.128Z,1478882492.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:32.536Z,1478882492.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:32.556Z,1478882492.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:32.920Z,1478882492.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:32.964Z,1478882492.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:33.333Z,1478882493.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:33.727Z,1478882493.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:33.760Z,1478882493.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:34.128Z,1478882494.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:34.556Z,1478882494.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:34.585Z,1478882494.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:34.939Z,1478882494.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:34.964Z,1478882494.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:35.313Z,1478882495.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:35.711Z,1478882495.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:35.760Z,1478882495.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:36.111Z,1478882496.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:36.529Z,1478882496.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:36.556Z,1478882496.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:36.917Z,1478882496.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:36.964Z,1478882496.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:37.314Z,1478882497.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:37.722Z,1478882497.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:37.760Z,1478882497.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:38.121Z,1478882498.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:38.557Z,1478882498.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:38.617Z,1478882498.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:38.929Z,1478882498.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:39.068Z,1478882499.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:39.318Z,1478882499.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:39.730Z,1478882499.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:39.864Z,1478882499.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:40.121Z,1478882500.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:40.522Z,1478882500.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:40.660Z,1478882500.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:41.009Z,1478882501.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:41.322Z,1478882501.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:41.392Z,1478882501.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:41.730Z,1478882501.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:42.139Z,1478882502.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:42.188Z,1478882502.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:42.557Z,1478882502.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:42.973Z,1478882502.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:42.984Z,1478882502.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:43.333Z,1478882503.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:43.392Z,1478882503.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:43.765Z,1478882503.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:44.173Z,1478882504.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:44.188Z,1478882504.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:44.541Z,1478882504.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:44.921Z,1478882504.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:44.936Z,1478882504.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:45.329Z,1478882505.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:45.725Z,1478882505.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:45.732Z,1478882505.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:46.129Z,1478882506.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:46.528Z,1478882506.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:46.546Z,1478882506.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:46.927Z,1478882506.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:46.944Z,1478882506.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:47.326Z,1478882507.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:47.729Z,1478882507.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:47.740Z,1478882507.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:48.130Z,1478882508.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:48.536Z,1478882508.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:48.544Z,1478882508.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:48.908Z,1478882508.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:48.944Z,1478882508.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:49.342Z,1478882509.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:49.710Z,1478882509.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:49.740Z,1478882509.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:50.110Z,1478882510.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:50.522Z,1478882510.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:50.536Z,1478882510.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:50.917Z,1478882510.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:50.944Z,1478882510.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:51.313Z,1478882511.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:51.726Z,1478882511.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:51.748Z,1478882511.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:52.129Z,1478882512.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:52.544Z,1478882512.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:52.581Z,1478882512.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:52.921Z,1478882512.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:52.996Z,1478882512.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:53.324Z,1478882513.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:53.702Z,1478882513.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:53.792Z,1478882513.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:54.124Z,1478882514.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:54.524Z,1478882514.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:54.588Z,1478882514.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:54.971Z,1478882514.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:55.349Z,1478882515.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:55.380Z,1478882515.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:55.740Z,1478882515.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:56.165Z,1478882516.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:56.176Z,1478882516.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:56.521Z,1478882516.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:56.976Z,1478882516.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:57.007Z,1478882517.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:57.322Z,1478882517.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:57.384Z,1478882517.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:57.753Z,1478882517.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:58.153Z,1478882518.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:58.180Z,1478882518.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:58.539Z,1478882518.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:58.884Z,1478882518.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:58.924Z,1478882518.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:59.361Z,1478882519.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:41:59.680Z,1478882519.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:41:59.724Z,1478882519.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:00.121Z,1478882520.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:00.476Z,1478882520.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:00.542Z,1478882520.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:00.884Z,1478882520.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:00.989Z,1478882520.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:01.336Z,1478882521.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:01.680Z,1478882521.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:01.730Z,1478882521.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:02.129Z,1478882522.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:02.477Z,1478882522.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:02.537Z,1478882522.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:02.884Z,1478882522.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:02.925Z,1478882522.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:03.337Z,1478882523.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:03.680Z,1478882523.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:03.741Z,1478882523.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:04.161Z,1478882524.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:04.477Z,1478882524.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:04.568Z,1478882524.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:04.928Z,1478882524.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:04.966Z,1478882524.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:05.367Z,1478882525.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:05.725Z,1478882525.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:05.757Z,1478882525.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:06.142Z,1478882526.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:06.521Z,1478882526.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:06.636Z,1478882526.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:06.934Z,1478882526.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:07.008Z,1478882527.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:07.341Z,1478882527.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:07.753Z,1478882527.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:07.804Z,1478882527.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:08.143Z,1478882528.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:08.554Z,1478882528.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:08.600Z,1478882528.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:08.980Z,1478882528.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:09.346Z,1478882529.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:09.396Z,1478882529.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:09.764Z,1478882529.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:09.804Z,1478882529.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:10.601Z,1478882530.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:11.348Z,1478882531.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:12.144Z,1478882532.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:12.888Z,1478882532.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:13.684Z,1478882533.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:14.480Z,1478882534.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:14.593Z,1478882534.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:14.745Z,1478882534.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:14.888Z,1478882534.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:15.093Z,1478882535.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:15.488Z,1478882535.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:15.684Z,1478882535.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:15.902Z,1478882535.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:16.330Z,1478882536.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:16.480Z,1478882536.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:16.656Z,1478882536.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:16.705Z,1478882536.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:16.904Z,1478882536.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:17.062Z,1478882537.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:17.126Z,1478882537.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:17.463Z,1478882537.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:17.525Z,1478882537.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:17.700Z,1478882537.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:17.873Z,1478882537.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:17.893Z,1478882537.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:18.273Z,1478882538.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:18.298Z,1478882538.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:18.496Z,1478882538.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:18.659Z,1478882538.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:18.699Z,1478882538.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:18.904Z,1478882538.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:19.060Z,1478882539.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:19.089Z,1478882539.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:19.456Z,1478882539.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:19.496Z,1478882539.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:19.700Z,1478882539.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:19.855Z,1478882539.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:19.909Z,1478882539.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:20.255Z,1478882540.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:20.310Z,1478882540.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:20.497Z,1478882540.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:20.684Z,1478882540.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:20.762Z,1478882540.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:20.948Z,1478882540.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:21.064Z,1478882541.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:21.116Z,1478882541.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:21.463Z,1478882541.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:21.497Z,1478882541.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:21.744Z,1478882541.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:21.877Z,1478882541.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:21.902Z,1478882541.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:22.266Z,1478882542.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:22.332Z,1478882542.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:22.540Z,1478882542.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:22.659Z,1478882542.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:22.701Z,1478882542.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:23.056Z,1478882543.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:23.076Z,1478882543.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:23.324Z,1478882543.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:23.464Z,1478882543.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:23.517Z,1478882543.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:23.861Z,1478882543.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:23.897Z,1478882543.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:24.120Z,1478882544.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:24.262Z,1478882544.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:24.290Z,1478882544.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:24.654Z,1478882544.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:24.690Z,1478882544.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:24.918Z,1478882544.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:25.055Z,1478882545.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:25.101Z,1478882545.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:25.328Z,1478882545.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:25.456Z,1478882545.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:25.500Z,1478882545.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:25.856Z,1478882545.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:25.900Z,1478882545.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:26.124Z,1478882546.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:26.259Z,1478882546.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:26.275Z,1478882546.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:26.655Z,1478882546.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:26.694Z,1478882546.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:26.856Z,1478882546.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:27.054Z,1478882547.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:27.078Z,1478882547.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:27.481Z,1478882547.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:27.652Z,1478882547.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:27.871Z,1478882547.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:28.289Z,1478882548.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:28.448Z,1478882548.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:28.689Z,1478882548.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:28.856Z,1478882548.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:29.086Z,1478882549.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:29.521Z,1478882549.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:29.652Z,1478882549.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:29.885Z,1478882549.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:30.288Z,1478882550.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:30.448Z,1478882550.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:30.713Z,1478882550.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:31.079Z,1478882551.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:31.244Z,1478882551.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:31.505Z,1478882551.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:31.905Z,1478882551.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:32.040Z,1478882552.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:32.273Z,1478882552.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:32.677Z,1478882552.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:32.836Z,1478882552.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:33.077Z,1478882553.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:33.468Z,1478882553.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:33.632Z,1478882553.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:33.877Z,1478882553.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:34.277Z,1478882554.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:34.428Z,1478882554.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:34.669Z,1478882554.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:35.087Z,1478882555.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:35.224Z,1478882555.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:35.483Z,1478882555.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:35.872Z,1478882555.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:36.020Z,1478882556.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:36.321Z,1478882556.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:36.677Z,1478882556.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:36.816Z,1478882556.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:37.072Z,1478882557.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:37.477Z,1478882557.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:37.612Z,1478882557.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:37.877Z,1478882557.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:38.269Z,1478882558.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:38.408Z,1478882558.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:38.677Z,1478882558.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:39.073Z,1478882559.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:39.204Z,1478882559.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:39.489Z,1478882559.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:39.879Z,1478882559.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:39.000Z,1478882560.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:40.273Z,1478882560.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:40.728Z,1478882560.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:40.796Z,1478882560.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:41.074Z,1478882561.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:41.477Z,1478882561.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:41.592Z,1478882561.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:41.877Z,1478882561.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:42.281Z,1478882562.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:42.388Z,1478882562.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:42.674Z,1478882562.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:43.078Z,1478882563.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:43.184Z,1478882563.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:43.473Z,1478882563.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:43.901Z,1478882563.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:43.980Z,1478882563.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:44.287Z,1478882564.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:44.673Z,1478882564.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:44.776Z,1478882564.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:45.104Z,1478882565.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:45.472Z,1478882565.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:45.572Z,1478882565.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:45.914Z,1478882565.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:46.305Z,1478882566.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:46.368Z,1478882566.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:46.673Z,1478882566.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:47.069Z,1478882567.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:47.164Z,1478882567.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:47.477Z,1478882567.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:47.887Z,1478882567.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:47.960Z,1478882567.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:48.279Z,1478882568.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:48.677Z,1478882568.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:48.756Z,1478882568.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:49.072Z,1478882569.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:49.473Z,1478882569.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:49.552Z,1478882569.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:49.877Z,1478882569.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:50.272Z,1478882570.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:50.348Z,1478882570.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:50.677Z,1478882570.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:51.073Z,1478882571.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:51.144Z,1478882571.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:51.472Z,1478882571.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:51.877Z,1478882571.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:51.940Z,1478882571.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:52.317Z,1478882572.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:52.512Z,1478882572.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:52.715Z,1478882572.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:52.920Z,1478882572.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:53.082Z,1478882573.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:53.328Z,1478882573.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:53.486Z,1478882573.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:53.736Z,1478882573.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:53.891Z,1478882573.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:54.144Z,1478882574.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:54.278Z,1478882574.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:54.552Z,1478882574.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:54.698Z,1478882574.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:54.960Z,1478882574.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:55.116Z,1478882575.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:55.368Z,1478882575.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:55.528Z,1478882575.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:55.776Z,1478882575.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:55.907Z,1478882575.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:56.184Z,1478882576.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:56.297Z,1478882576.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:56.592Z,1478882576.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:56.693Z,1478882576.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:56.000Z,1478882577.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:57.090Z,1478882577.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:57.408Z,1478882577.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:57.495Z,1478882577.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:57.816Z,1478882577.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:57.895Z,1478882577.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:58.350Z,1478882578.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:58.612Z,1478882578.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:58.708Z,1478882578.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:59.020Z,1478882579.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:59.081Z,1478882579.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:59.488Z,1478882579.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:42:59.816Z,1478882579.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:42:59.897Z,1478882579.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:00.281Z,1478882580.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:00.612Z,1478882580.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:00.702Z,1478882580.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:01.020Z,1478882581.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:01.101Z,1478882581.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:01.474Z,1478882581.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:01.816Z,1478882581.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:01.898Z,1478882581.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:02.294Z,1478882582.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:02.612Z,1478882582.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:02.701Z,1478882582.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:03.020Z,1478882583.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:03.109Z,1478882583.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:03.490Z,1478882583.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:03.816Z,1478882583.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:03.873Z,1478882583.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:04.296Z,1478882584.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:04.612Z,1478882584.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:04.678Z,1478882584.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:05.075Z,1478882585.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:05.228Z,1478882585.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:05.488Z,1478882585.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:05.881Z,1478882585.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:06.024Z,1478882586.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:06.286Z,1478882586.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:06.680Z,1478882586.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:06.822Z,1478882586.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:07.101Z,1478882587.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:07.232Z,1478882587.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:07.498Z,1478882587.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:07.904Z,1478882587.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:08.028Z,1478882588.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:08.341Z,1478882588.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:08.678Z,1478882588.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:08.804Z,1478882588.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:09.080Z,1478882589.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:09.474Z,1478882589.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:09.879Z,1478882589.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:13.354Z,1478882593.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:13.501Z,1478882593.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:13.876Z,1478882593.876 [PNI_TCM](ERROR): CRC does not match. Expected:0x36509 got:0x20783
2016-11-11T16:43:13.900Z,1478882593.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:14.360Z,1478882594.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:14.701Z,1478882594.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:15.079Z,1478882595.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:15.485Z,1478882595.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:15.600Z,1478882595.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:15.903Z,1478882595.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:16.270Z,1478882596.270 [BPC1](ERROR): Failed to receive battery data
2016-11-11T16:43:16.270Z,1478882596.270 [BPC1] Communications Fault, FailCount= 1
2016-11-11T16:43:16.270Z,1478882596.270 [BPC1](ERROR): Communications Fault
2016-11-11T16:43:16.282Z,1478882596.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:16.323Z,1478882596.323 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T16:43:16.397Z,1478882596.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:16.665Z,1478882596.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:16.682Z,1478882596.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:16.848Z,1478882596.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:17.058Z,1478882597.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:17.086Z,1478882597.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:17.465Z,1478882597.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:17.493Z,1478882597.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:17.530Z,1478882597.530 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:43:17.530Z,1478882597.530 [BPC1] No Fault, FailCount= 1
2016-11-11T16:43:17.644Z,1478882597.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:17.878Z,1478882597.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:17.950Z,1478882597.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:18.269Z,1478882598.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:18.329Z,1478882598.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:18.440Z,1478882598.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:18.680Z,1478882598.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:18.696Z,1478882598.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:19.064Z,1478882599.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:19.096Z,1478882599.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:19.216Z,1478882599.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:19.454Z,1478882599.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:19.488Z,1478882599.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:19.855Z,1478882599.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:19.885Z,1478882599.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:20.012Z,1478882600.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:20.297Z,1478882600.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:20.697Z,1478882600.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:20.808Z,1478882600.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:21.090Z,1478882601.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:21.220Z,1478882601.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:21.455Z,1478882601.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:21.485Z,1478882601.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:21.855Z,1478882601.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:21.891Z,1478882601.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:22.018Z,1478882602.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:22.253Z,1478882602.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:22.329Z,1478882602.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:22.661Z,1478882602.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:22.700Z,1478882602.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:22.764Z,1478882602.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:23.069Z,1478882603.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:23.085Z,1478882603.085 [PNI_TCM](ERROR): CRC does not match. Expected:0x39603 got:0x50695
2016-11-11T16:43:23.110Z,1478882603.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:23.464Z,1478882603.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:23.513Z,1478882603.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:23.869Z,1478882603.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:23.901Z,1478882603.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:24.301Z,1478882604.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:24.385Z,1478882604.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:24.660Z,1478882604.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:24.695Z,1478882604.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:25.056Z,1478882605.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:25.110Z,1478882605.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:25.453Z,1478882605.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:25.521Z,1478882605.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:25.857Z,1478882605.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:25.874Z,1478882605.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:26.266Z,1478882606.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:26.329Z,1478882606.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:26.655Z,1478882606.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:26.670Z,1478882606.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:27.059Z,1478882607.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:27.095Z,1478882607.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:27.462Z,1478882607.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:27.469Z,1478882607.469 [PNI_TCM](ERROR): CRC does not match. Expected:0x13162 got:0x16962
2016-11-11T16:43:27.503Z,1478882607.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:27.868Z,1478882607.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:27.900Z,1478882607.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:28.294Z,1478882608.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:28.325Z,1478882608.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:28.673Z,1478882608.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:28.688Z,1478882608.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:29.068Z,1478882609.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:29.101Z,1478882609.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:29.455Z,1478882609.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:29.480Z,1478882609.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:29.576Z,1478882609.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:29.854Z,1478882609.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:29.889Z,1478882609.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:30.253Z,1478882610.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:30.292Z,1478882610.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:30.373Z,1478882610.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:30.658Z,1478882610.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:30.692Z,1478882610.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:30.840Z,1478882610.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:31.060Z,1478882611.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:31.091Z,1478882611.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:31.461Z,1478882611.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:31.476Z,1478882611.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:31.636Z,1478882611.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:31.860Z,1478882611.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:31.882Z,1478882611.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:32.257Z,1478882612.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:32.289Z,1478882612.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:32.432Z,1478882612.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:32.655Z,1478882612.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:32.685Z,1478882612.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:33.063Z,1478882613.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:33.097Z,1478882613.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:33.204Z,1478882613.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:33.470Z,1478882613.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:33.506Z,1478882613.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:33.868Z,1478882613.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:33.895Z,1478882613.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:33.000Z,1478882614.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:34.279Z,1478882614.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:34.295Z,1478882614.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:34.662Z,1478882614.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:34.693Z,1478882614.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:35.055Z,1478882615.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:35.082Z,1478882615.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:35.455Z,1478882615.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:35.494Z,1478882615.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:35.854Z,1478882615.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:35.890Z,1478882615.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:36.260Z,1478882616.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:36.366Z,1478882616.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:36.655Z,1478882616.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:36.671Z,1478882616.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:37.059Z,1478882617.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:37.079Z,1478882617.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:37.461Z,1478882617.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:37.513Z,1478882617.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:37.868Z,1478882617.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:37.883Z,1478882617.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:38.303Z,1478882618.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:38.336Z,1478882618.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:38.675Z,1478882618.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:38.725Z,1478882618.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:39.075Z,1478882619.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:39.090Z,1478882619.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:39.526Z,1478882619.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:39.888Z,1478882619.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:40.347Z,1478882620.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:40.686Z,1478882620.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:41.073Z,1478882621.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:41.501Z,1478882621.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:41.885Z,1478882621.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:42.322Z,1478882622.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:42.677Z,1478882622.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:43.075Z,1478882623.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:43.483Z,1478882623.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:43.560Z,1478882623.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:43.878Z,1478882623.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:44.289Z,1478882624.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:44.356Z,1478882624.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:44.700Z,1478882624.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:44.828Z,1478882624.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:45.087Z,1478882625.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:45.486Z,1478882625.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:45.873Z,1478882625.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:46.281Z,1478882626.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:46.677Z,1478882626.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:47.089Z,1478882627.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:47.480Z,1478882627.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:47.893Z,1478882627.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:48.285Z,1478882628.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:48.741Z,1478882628.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:49.096Z,1478882629.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:49.495Z,1478882629.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:49.893Z,1478882629.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:50.325Z,1478882630.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:50.672Z,1478882630.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:51.117Z,1478882631.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:51.482Z,1478882631.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:51.883Z,1478882631.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:52.346Z,1478882632.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:52.684Z,1478882632.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:53.101Z,1478882633.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:53.489Z,1478882633.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:53.933Z,1478882633.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:54.349Z,1478882634.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:54.701Z,1478882634.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:55.096Z,1478882635.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:55.493Z,1478882635.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:55.873Z,1478882635.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:56.318Z,1478882636.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:56.677Z,1478882636.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:57.071Z,1478882637.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:57.482Z,1478882637.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:57.876Z,1478882637.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:58.275Z,1478882638.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:58.690Z,1478882638.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:59.090Z,1478882639.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:59.148Z,1478882639.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:59.485Z,1478882639.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:43:59.556Z,1478882639.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:43:59.901Z,1478882639.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:00.287Z,1478882640.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:00.733Z,1478882640.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:01.090Z,1478882641.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:01.494Z,1478882641.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:01.878Z,1478882641.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:02.277Z,1478882642.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:02.705Z,1478882642.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:03.077Z,1478882643.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:03.489Z,1478882643.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:03.877Z,1478882643.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:04.298Z,1478882644.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:04.701Z,1478882644.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:05.125Z,1478882645.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:05.498Z,1478882645.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:05.877Z,1478882645.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:06.366Z,1478882646.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:06.677Z,1478882646.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:07.111Z,1478882647.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:07.477Z,1478882647.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:07.910Z,1478882647.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:08.306Z,1478882648.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:08.683Z,1478882648.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:09.077Z,1478882649.077 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:09.077Z,1478882649.077 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 218
2016-11-11T16:44:09.077Z,1478882649.077 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:44:09.084Z,1478882649.084 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:09.084Z,1478882649.084 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 218
2016-11-11T16:44:09.084Z,1478882649.084 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:44:09.086Z,1478882649.086 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:09.086Z,1478882649.086 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 218
2016-11-11T16:44:09.086Z,1478882649.086 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:44:09.112Z,1478882649.112 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:44:09.113Z,1478882649.113 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:44:09.113Z,1478882649.113 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:44:09.545Z,1478882649.545 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:44:09.545Z,1478882649.545 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 218
2016-11-11T16:44:09.546Z,1478882649.546 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:44:09.546Z,1478882649.546 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 218
2016-11-11T16:44:09.547Z,1478882649.547 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:44:09.547Z,1478882649.547 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 218
2016-11-11T16:44:09.889Z,1478882649.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:44:09.890Z,1478882649.890 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:44:09.890Z,1478882649.890 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:44:09.895Z,1478882649.895 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:44:09.895Z,1478882649.895 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:44:09.896Z,1478882649.896 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:44:09.896Z,1478882649.896 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:44:09.897Z,1478882649.897 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:44:09.897Z,1478882649.897 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:44:13.260Z,1478882653.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:13.403Z,1478882653.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:13.564Z,1478882653.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:44:13.765Z,1478882653.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:14.156Z,1478882654.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:14.360Z,1478882654.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:44:14.573Z,1478882654.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:14.973Z,1478882654.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:15.384Z,1478882655.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:15.774Z,1478882655.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:16.168Z,1478882656.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:16.565Z,1478882656.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:16.965Z,1478882656.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:17.366Z,1478882657.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:17.766Z,1478882657.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:18.204Z,1478882658.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:18.553Z,1478882658.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:19.001Z,1478882659.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:19.370Z,1478882659.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:19.766Z,1478882659.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:20.230Z,1478882660.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:20.579Z,1478882660.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:20.978Z,1478882660.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:21.411Z,1478882661.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:21.750Z,1478882661.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:22.230Z,1478882662.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:22.588Z,1478882662.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:22.957Z,1478882662.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:23.357Z,1478882663.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:23.758Z,1478882663.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:24.216Z,1478882664.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:24.574Z,1478882664.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:24.981Z,1478882664.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:25.373Z,1478882665.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:25.795Z,1478882665.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:26.193Z,1478882666.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:26.562Z,1478882666.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:26.961Z,1478882666.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:27.360Z,1478882667.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:27.536Z,1478882667.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:44:27.767Z,1478882667.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:28.158Z,1478882668.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:28.332Z,1478882668.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:44:28.565Z,1478882668.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:28.961Z,1478882668.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:29.356Z,1478882669.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:29.770Z,1478882669.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:30.169Z,1478882670.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:30.562Z,1478882670.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:30.976Z,1478882670.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:31.354Z,1478882671.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:31.756Z,1478882671.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:32.237Z,1478882672.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:32.589Z,1478882672.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:32.993Z,1478882672.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:33.371Z,1478882673.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:33.760Z,1478882673.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:34.217Z,1478882674.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:34.563Z,1478882674.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:34.997Z,1478882674.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:35.362Z,1478882675.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:35.785Z,1478882675.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:36.202Z,1478882676.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:36.593Z,1478882676.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:36.993Z,1478882676.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:37.373Z,1478882677.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:37.770Z,1478882677.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:38.240Z,1478882678.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:38.555Z,1478882678.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:38.980Z,1478882678.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:39.358Z,1478882679.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:39.759Z,1478882679.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:40.168Z,1478882680.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:40.566Z,1478882680.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:40.973Z,1478882680.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:41.372Z,1478882681.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:41.770Z,1478882681.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:42.167Z,1478882682.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:42.570Z,1478882682.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:42.973Z,1478882682.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:43.367Z,1478882683.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:43.777Z,1478882683.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:44.158Z,1478882684.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:44.567Z,1478882684.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:44.968Z,1478882684.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:45.387Z,1478882685.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:45.770Z,1478882685.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:46.225Z,1478882686.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:46.573Z,1478882686.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:46.977Z,1478882686.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:47.346Z,1478882687.346 [PNI_TCM](ERROR): CRC does not match. Expected:0x57027 got:0x16962
2016-11-11T16:44:47.405Z,1478882687.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:47.771Z,1478882687.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:48.206Z,1478882688.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:48.581Z,1478882688.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:48.969Z,1478882688.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:49.385Z,1478882689.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:49.778Z,1478882689.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:50.221Z,1478882690.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:50.569Z,1478882690.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:50.997Z,1478882690.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:51.377Z,1478882691.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:51.769Z,1478882691.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:52.194Z,1478882692.194 [PNI_TCM](ERROR): CRC does not match. Expected:0x1280 got:0x18343
2016-11-11T16:44:52.225Z,1478882692.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:52.569Z,1478882692.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:52.957Z,1478882692.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:53.368Z,1478882693.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:53.760Z,1478882693.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:54.162Z,1478882694.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:54.572Z,1478882694.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:54.986Z,1478882694.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:55.372Z,1478882695.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:55.779Z,1478882695.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:56.153Z,1478882696.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:56.550Z,1478882696.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:56.965Z,1478882696.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:57.361Z,1478882697.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:57.766Z,1478882697.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:58.166Z,1478882698.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:58.569Z,1478882698.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:58.961Z,1478882698.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:59.361Z,1478882699.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:44:59.763Z,1478882699.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:00.163Z,1478882700.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:00.567Z,1478882700.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:00.969Z,1478882700.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:01.371Z,1478882701.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:01.793Z,1478882701.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:02.222Z,1478882702.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:02.576Z,1478882702.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:02.975Z,1478882702.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:03.394Z,1478882703.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:03.757Z,1478882703.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:04.241Z,1478882704.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:04.561Z,1478882704.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:04.998Z,1478882704.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:05.398Z,1478882705.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:05.762Z,1478882705.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:06.212Z,1478882706.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:06.558Z,1478882706.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:06.972Z,1478882706.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:07.374Z,1478882707.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:07.765Z,1478882707.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:08.187Z,1478882708.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:08.573Z,1478882708.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:08.952Z,1478882708.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:09.356Z,1478882709.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:09.776Z,1478882709.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:10.199Z,1478882710.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:13.564Z,1478882713.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:13.589Z,1478882713.589 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T16:40:12.8Z
2016-11-11T16:45:13.589Z,1478882713.589 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T16:45:13.589Z,1478882713.589 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T16:45:13.716Z,1478882713.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:15.630Z,1478882715.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:15.764Z,1478882715.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:16.141Z,1478882716.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:16.542Z,1478882716.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:19.969Z,1478882719.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:20.044Z,1478882720.044 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0276.lzma
2016-11-11T16:45:20.105Z,1478882720.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:20.501Z,1478882720.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:20.837Z,1478882720.838 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0276.lzma.bak
2016-11-11T16:45:20.838Z,1478882720.838 [DataOverHttps](INFO): SBD MOMSN=4555579
2016-11-11T16:45:20.905Z,1478882720.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:22.262Z,1478882722.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:22.409Z,1478882722.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:25.922Z,1478882725.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:26.101Z,1478882726.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:26.465Z,1478882726.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:26.858Z,1478882726.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:27.221Z,1478882727.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:27.625Z,1478882727.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:31.135Z,1478882731.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:31.212Z,1478882731.211 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20161111T044527/Express0277.lzma
2016-11-11T16:45:31.294Z,1478882731.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:31.729Z,1478882731.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:32.001Z,1478882732.001 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0277.lzma.bak
2016-11-11T16:45:32.002Z,1478882732.002 [DataOverHttps](INFO): SBD MOMSN=4555581
2016-11-11T16:45:32.075Z,1478882732.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:33.406Z,1478882733.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:33.439Z,1478882733.439 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T16:45:33.439Z,1478882733.439 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T16:45:33.439Z,1478882733.439 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T16:45:33.529Z,1478882733.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:37.037Z,1478882737.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:37.205Z,1478882737.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:37.539Z,1478882737.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:37.943Z,1478882737.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:38.321Z,1478882738.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:38.753Z,1478882738.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:39.113Z,1478882739.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:39.516Z,1478882739.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:39.953Z,1478882739.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:40.333Z,1478882740.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:40.741Z,1478882740.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:41.145Z,1478882741.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:41.530Z,1478882741.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:41.930Z,1478882741.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:42.335Z,1478882742.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:42.738Z,1478882742.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:43.132Z,1478882743.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:43.531Z,1478882743.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:43.909Z,1478882743.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:44.332Z,1478882744.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:44.709Z,1478882744.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:45.107Z,1478882745.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:45.476Z,1478882745.476 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T16:45:45.513Z,1478882745.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:45.917Z,1478882745.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:46.317Z,1478882746.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:46.761Z,1478882746.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:47.117Z,1478882747.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:47.524Z,1478882747.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:47.920Z,1478882747.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:48.319Z,1478882748.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:48.721Z,1478882748.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:49.117Z,1478882749.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:49.518Z,1478882749.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:49.914Z,1478882749.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:50.324Z,1478882750.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:50.718Z,1478882750.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:51.072Z,1478882751.072 [NAL9602](INFO): Powering down
2016-11-11T16:45:51.137Z,1478882751.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:51.524Z,1478882751.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:51.920Z,1478882751.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:52.331Z,1478882752.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:52.721Z,1478882752.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:53.149Z,1478882753.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:53.509Z,1478882753.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:53.949Z,1478882753.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:54.317Z,1478882754.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:54.734Z,1478882754.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:55.137Z,1478882755.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:55.508Z,1478882755.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:55.909Z,1478882755.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:56.313Z,1478882756.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:56.717Z,1478882756.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:57.108Z,1478882757.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:57.505Z,1478882757.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:57.907Z,1478882757.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:58.304Z,1478882758.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:58.704Z,1478882758.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:59.108Z,1478882759.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:59.505Z,1478882759.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:45:59.913Z,1478882759.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:00.309Z,1478882760.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:00.708Z,1478882760.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:01.104Z,1478882761.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:01.513Z,1478882761.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:01.926Z,1478882761.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:02.304Z,1478882762.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:02.713Z,1478882762.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:03.117Z,1478882763.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:03.508Z,1478882763.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:03.918Z,1478882763.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:04.309Z,1478882764.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:04.704Z,1478882764.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:05.113Z,1478882765.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:05.509Z,1478882765.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:05.529Z,1478882765.529 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T16:46:05.913Z,1478882765.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:06.356Z,1478882766.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:06.708Z,1478882766.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:07.186Z,1478882767.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:07.513Z,1478882767.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:07.934Z,1478882767.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:08.308Z,1478882768.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:08.730Z,1478882768.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:09.137Z,1478882769.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:09.508Z,1478882769.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:09.904Z,1478882769.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:10.308Z,1478882770.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:10.707Z,1478882770.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:11.113Z,1478882771.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:11.508Z,1478882771.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:11.904Z,1478882771.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:12.307Z,1478882772.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:12.709Z,1478882772.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:13.108Z,1478882773.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:13.565Z,1478882773.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:13.910Z,1478882773.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:14.345Z,1478882774.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:14.724Z,1478882774.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:15.117Z,1478882775.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:15.521Z,1478882775.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:15.917Z,1478882775.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:16.309Z,1478882776.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:16.717Z,1478882776.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:17.109Z,1478882777.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:17.161Z,1478882777.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:46:17.517Z,1478882777.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:17.572Z,1478882777.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:46:17.918Z,1478882777.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:18.317Z,1478882778.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:18.709Z,1478882778.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:19.117Z,1478882779.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:19.521Z,1478882779.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:19.917Z,1478882779.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:20.314Z,1478882780.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:20.768Z,1478882780.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:21.154Z,1478882781.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:21.509Z,1478882781.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:21.913Z,1478882781.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:22.350Z,1478882782.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:22.711Z,1478882782.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:23.149Z,1478882783.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:23.553Z,1478882783.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:23.911Z,1478882783.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:24.331Z,1478882784.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:24.732Z,1478882784.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:25.129Z,1478882785.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:25.509Z,1478882785.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:25.907Z,1478882785.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:26.309Z,1478882786.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:26.711Z,1478882786.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:27.111Z,1478882787.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:27.511Z,1478882787.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:27.915Z,1478882787.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:28.317Z,1478882788.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:28.712Z,1478882788.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:28.884Z,1478882788.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:46:29.120Z,1478882789.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:29.513Z,1478882789.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:29.680Z,1478882789.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:46:29.914Z,1478882789.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:30.320Z,1478882790.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:30.720Z,1478882790.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:31.117Z,1478882791.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:31.525Z,1478882791.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:31.933Z,1478882791.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:32.320Z,1478882792.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:32.720Z,1478882792.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:33.130Z,1478882793.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:33.520Z,1478882793.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:33.920Z,1478882793.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:37.486Z,1478882797.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:37.598Z,1478882797.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:38.046Z,1478882798.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:38.401Z,1478882798.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:38.784Z,1478882798.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:39.206Z,1478882799.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:39.606Z,1478882799.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:39.988Z,1478882799.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:40.397Z,1478882800.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:40.797Z,1478882800.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:41.177Z,1478882801.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:41.320Z,1478882801.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:46:41.592Z,1478882801.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:41.994Z,1478882801.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:42.116Z,1478882802.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:46:42.381Z,1478882802.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:42.786Z,1478882802.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:43.187Z,1478882803.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:43.588Z,1478882803.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:43.982Z,1478882803.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:44.386Z,1478882804.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:44.775Z,1478882804.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:45.190Z,1478882805.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:45.581Z,1478882805.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:46.017Z,1478882806.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:46.385Z,1478882806.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:46.779Z,1478882806.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:47.183Z,1478882807.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:47.585Z,1478882807.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:48.033Z,1478882808.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:48.379Z,1478882808.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:48.784Z,1478882808.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:49.186Z,1478882809.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:49.580Z,1478882809.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:50.019Z,1478882810.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:50.394Z,1478882810.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:50.778Z,1478882810.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:51.189Z,1478882811.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:51.621Z,1478882811.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:52.061Z,1478882812.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:52.382Z,1478882812.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:52.805Z,1478882812.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:53.184Z,1478882813.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:53.597Z,1478882813.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:54.009Z,1478882814.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:54.375Z,1478882814.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:54.775Z,1478882814.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:55.181Z,1478882815.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:55.316Z,1478882815.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:46:55.581Z,1478882815.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:55.981Z,1478882815.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:56.112Z,1478882816.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:46:56.417Z,1478882816.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:56.778Z,1478882816.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:57.185Z,1478882817.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:57.586Z,1478882817.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:57.978Z,1478882817.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:58.449Z,1478882818.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:58.775Z,1478882818.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:59.174Z,1478882819.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:46:59.581Z,1478882819.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:00.014Z,1478882820.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:00.376Z,1478882820.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:00.779Z,1478882820.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:01.186Z,1478882821.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:01.579Z,1478882821.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:02.003Z,1478882822.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:02.381Z,1478882822.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:02.784Z,1478882822.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:03.189Z,1478882823.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:03.589Z,1478882823.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:04.003Z,1478882824.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:04.387Z,1478882824.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:04.786Z,1478882824.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:05.161Z,1478882825.161 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T16:47:05.161Z,1478882825.161 [BPC1] Data Fault, FailCount= 1
2016-11-11T16:47:05.161Z,1478882825.161 [BPC1](ERROR): Data Fault
2016-11-11T16:47:05.181Z,1478882825.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:05.221Z,1478882825.221 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T16:47:05.616Z,1478882825.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:06.017Z,1478882826.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:06.394Z,1478882826.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:06.463Z,1478882826.464 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:47:06.464Z,1478882826.464 [BPC1] No Fault, FailCount= 1
2016-11-11T16:47:06.901Z,1478882826.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:07.207Z,1478882827.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:07.584Z,1478882827.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:07.983Z,1478882827.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:08.405Z,1478882828.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:08.799Z,1478882828.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:09.195Z,1478882829.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:09.608Z,1478882829.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:09.981Z,1478882829.981 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:09.981Z,1478882829.981 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 219
2016-11-11T16:47:09.982Z,1478882829.981 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:47:10.021Z,1478882830.021 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:10.021Z,1478882830.021 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 219
2016-11-11T16:47:10.021Z,1478882830.021 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:47:10.031Z,1478882830.031 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:10.032Z,1478882830.032 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 219
2016-11-11T16:47:10.032Z,1478882830.032 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:47:10.066Z,1478882830.066 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:47:10.067Z,1478882830.066 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:47:10.067Z,1478882830.067 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:47:10.495Z,1478882830.495 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:47:10.495Z,1478882830.495 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 219
2016-11-11T16:47:10.496Z,1478882830.496 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:47:10.496Z,1478882830.496 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 219
2016-11-11T16:47:10.497Z,1478882830.497 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:47:10.497Z,1478882830.497 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 219
2016-11-11T16:47:10.788Z,1478882830.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:47:10.789Z,1478882830.789 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:47:10.789Z,1478882830.789 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:47:10.794Z,1478882830.793 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:47:10.794Z,1478882830.794 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:47:10.794Z,1478882830.794 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:47:10.795Z,1478882830.795 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:47:10.821Z,1478882830.821 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:47:10.821Z,1478882830.821 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:47:11.195Z,1478882831.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:11.574Z,1478882831.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:12.006Z,1478882832.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:12.439Z,1478882832.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:12.796Z,1478882832.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:13.193Z,1478882833.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:13.584Z,1478882833.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:14.038Z,1478882834.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:14.368Z,1478882834.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:14.773Z,1478882834.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:15.181Z,1478882835.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:15.576Z,1478882835.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:15.984Z,1478882835.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:16.406Z,1478882836.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:16.796Z,1478882836.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:17.196Z,1478882837.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:17.581Z,1478882837.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:18.015Z,1478882838.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:18.376Z,1478882838.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:18.781Z,1478882838.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:19.183Z,1478882839.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:19.666Z,1478882839.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:19.982Z,1478882839.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:20.421Z,1478882840.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:20.794Z,1478882840.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:21.236Z,1478882841.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:21.609Z,1478882841.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:22.013Z,1478882842.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:22.408Z,1478882842.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:22.812Z,1478882842.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:23.186Z,1478882843.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:23.593Z,1478882843.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:23.990Z,1478882843.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:24.404Z,1478882844.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:24.789Z,1478882844.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:25.186Z,1478882845.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:25.586Z,1478882845.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:25.994Z,1478882845.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:26.392Z,1478882846.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:26.790Z,1478882846.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:27.185Z,1478882847.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:27.605Z,1478882847.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:28.020Z,1478882848.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:28.378Z,1478882848.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:28.789Z,1478882848.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:29.190Z,1478882849.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:29.268Z,1478882849.268 [CBIT](IMPORTANT): Beginning ground fault scan
2016-11-11T16:47:29.599Z,1478882849.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:30.010Z,1478882850.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:30.394Z,1478882850.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:30.793Z,1478882850.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:31.194Z,1478882851.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:31.590Z,1478882851.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:32.018Z,1478882852.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:32.414Z,1478882852.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:32.778Z,1478882852.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:33.238Z,1478882853.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:33.594Z,1478882853.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:34.046Z,1478882854.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:39.655Z,1478882859.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:39.852Z,1478882859.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:40.249Z,1478882860.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:40.607Z,1478882860.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:41.054Z,1478882861.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:41.411Z,1478882861.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:41.918Z,1478882861.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:42.230Z,1478882862.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:42.660Z,1478882862.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:43.029Z,1478882863.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:43.484Z,1478882863.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:43.864Z,1478882863.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:44.202Z,1478882864.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:44.606Z,1478882864.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:45.005Z,1478882865.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:45.032Z,1478882865.033 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.031141
CHAN A1 (24V): -0.002181
CHAN A2 (12V): 0.009744
CHAN A3 (5V): 0.002142
CHAN B0 (3.3V): 0.000481
CHAN B1 (3.15aV): 0.000307
CHAN B2 (3.15bV): 0.000378
CHAN B3 (GND): -0.002779
OPEN: 0.003546
Full Scale Calc: 4.765 mA, -1.589 mA
2016-11-11T16:47:45.401Z,1478882865.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:45.806Z,1478882865.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:46.205Z,1478882866.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:46.605Z,1478882866.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:47.002Z,1478882867.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:47.405Z,1478882867.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:47.881Z,1478882867.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:48.202Z,1478882868.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:48.609Z,1478882868.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:49.002Z,1478882869.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:49.406Z,1478882869.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:49.805Z,1478882869.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:50.214Z,1478882870.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:50.603Z,1478882870.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:51.006Z,1478882871.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:51.419Z,1478882871.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:51.810Z,1478882871.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:52.215Z,1478882872.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:52.605Z,1478882872.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:53.008Z,1478882873.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:53.397Z,1478882873.397 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T16:47:53.397Z,1478882873.397 [BPC1] Data Fault, FailCount= 1
2016-11-11T16:47:53.397Z,1478882873.397 [BPC1](ERROR): Data Fault
2016-11-11T16:47:53.408Z,1478882873.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:53.428Z,1478882873.428 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T16:47:53.813Z,1478882873.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:54.206Z,1478882874.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:54.649Z,1478882874.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:54.680Z,1478882874.680 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:47:54.680Z,1478882874.680 [BPC1] No Fault, FailCount= 1
2016-11-11T16:47:55.066Z,1478882875.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:55.449Z,1478882875.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:55.839Z,1478882875.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:56.209Z,1478882876.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:56.617Z,1478882876.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:57.014Z,1478882877.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:57.417Z,1478882877.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:57.862Z,1478882877.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:58.237Z,1478882878.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:58.619Z,1478882878.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:59.017Z,1478882879.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:59.427Z,1478882879.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:47:59.887Z,1478882879.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:00.272Z,1478882880.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:00.616Z,1478882880.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:01.022Z,1478882881.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:01.429Z,1478882881.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:01.889Z,1478882881.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:02.221Z,1478882882.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:02.614Z,1478882882.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:03.014Z,1478882883.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:03.434Z,1478882883.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:03.814Z,1478882883.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:04.243Z,1478882884.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:04.618Z,1478882884.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:05.019Z,1478882885.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:05.417Z,1478882885.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:05.827Z,1478882885.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:06.214Z,1478882886.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:06.637Z,1478882886.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:07.001Z,1478882887.001 [PNI_TCM](ERROR): CRC does not match. Expected:0x52304 got:0x16993
2016-11-11T16:48:07.027Z,1478882887.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:07.400Z,1478882887.399 [PNI_TCM](ERROR): CRC does not match. Expected:0x33382 got:0x4442
2016-11-11T16:48:07.457Z,1478882887.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:07.860Z,1478882887.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:08.233Z,1478882888.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:08.618Z,1478882888.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:09.049Z,1478882889.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:09.412Z,1478882889.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:09.905Z,1478882889.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:10.249Z,1478882890.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:10.627Z,1478882890.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:11.055Z,1478882891.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:11.433Z,1478882891.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:11.870Z,1478882891.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:12.223Z,1478882892.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:12.629Z,1478882892.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:13.013Z,1478882893.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:13.414Z,1478882893.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:13.886Z,1478882893.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:14.221Z,1478882894.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:14.649Z,1478882894.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:15.012Z,1478882895.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:15.420Z,1478882895.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:15.882Z,1478882895.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:16.242Z,1478882896.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:16.617Z,1478882896.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:17.016Z,1478882897.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:17.424Z,1478882897.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:17.813Z,1478882897.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:18.229Z,1478882898.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:18.629Z,1478882898.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:19.003Z,1478882899.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:19.409Z,1478882899.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:19.813Z,1478882899.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:20.219Z,1478882900.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:20.617Z,1478882900.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:21.024Z,1478882901.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:21.418Z,1478882901.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:21.806Z,1478882901.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:22.307Z,1478882902.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:22.630Z,1478882902.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:23.050Z,1478882903.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:23.417Z,1478882903.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:23.908Z,1478882903.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:24.213Z,1478882904.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:24.658Z,1478882904.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:25.015Z,1478882905.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:25.420Z,1478882905.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:25.862Z,1478882905.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:26.225Z,1478882906.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:26.614Z,1478882906.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:27.023Z,1478882907.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:27.466Z,1478882907.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:27.871Z,1478882907.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:28.212Z,1478882908.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:28.612Z,1478882908.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:29.024Z,1478882909.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:29.418Z,1478882909.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:29.852Z,1478882909.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:30.218Z,1478882910.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:30.632Z,1478882910.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:31.029Z,1478882911.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:31.448Z,1478882911.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:31.805Z,1478882911.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:32.229Z,1478882912.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:32.622Z,1478882912.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:33.056Z,1478882913.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:33.141Z,1478882913.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:33.425Z,1478882913.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:33.816Z,1478882913.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:33.936Z,1478882913.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:34.257Z,1478882914.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:34.728Z,1478882914.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:35.524Z,1478882915.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:36.320Z,1478882916.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:36.728Z,1478882916.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:37.524Z,1478882917.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:37.809Z,1478882917.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:37.957Z,1478882917.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:38.244Z,1478882918.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:38.370Z,1478882918.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:38.725Z,1478882918.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:39.040Z,1478882919.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:39.157Z,1478882919.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:39.546Z,1478882919.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:39.836Z,1478882919.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:39.937Z,1478882919.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:40.244Z,1478882920.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:40.336Z,1478882920.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:40.735Z,1478882920.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:41.040Z,1478882921.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:41.137Z,1478882921.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:41.532Z,1478882921.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:41.836Z,1478882921.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:41.943Z,1478882921.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:42.244Z,1478882922.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:42.344Z,1478882922.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:42.716Z,1478882922.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:43.040Z,1478882923.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:43.143Z,1478882923.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:43.519Z,1478882923.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:43.836Z,1478882923.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:43.933Z,1478882923.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:44.244Z,1478882924.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:44.337Z,1478882924.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:44.723Z,1478882924.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:45.040Z,1478882925.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:45.123Z,1478882925.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:45.522Z,1478882925.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:45.864Z,1478882925.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:45.962Z,1478882925.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:46.332Z,1478882926.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:46.356Z,1478882926.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:46.735Z,1478882926.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:47.137Z,1478882927.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:47.152Z,1478882927.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:47.536Z,1478882927.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:47.943Z,1478882927.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:47.948Z,1478882927.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:48.329Z,1478882928.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:48.668Z,1478882928.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:48.733Z,1478882928.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:49.125Z,1478882929.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:49.464Z,1478882929.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:49.538Z,1478882929.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:49.922Z,1478882929.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:50.260Z,1478882930.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:50.331Z,1478882930.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:50.668Z,1478882930.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:50.729Z,1478882930.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:51.129Z,1478882931.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:51.464Z,1478882931.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:51.557Z,1478882931.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:51.950Z,1478882931.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:52.196Z,1478882932.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:52.330Z,1478882932.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:52.733Z,1478882932.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:52.992Z,1478882932.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:53.157Z,1478882933.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:53.525Z,1478882933.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:53.788Z,1478882933.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:53.957Z,1478882933.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:54.196Z,1478882934.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:54.337Z,1478882934.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:54.753Z,1478882934.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:54.992Z,1478882934.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:55.121Z,1478882935.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:55.523Z,1478882935.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:55.788Z,1478882935.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:55.928Z,1478882935.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:56.196Z,1478882936.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:56.322Z,1478882936.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:56.723Z,1478882936.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:56.992Z,1478882936.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:57.128Z,1478882937.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:57.522Z,1478882937.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:57.788Z,1478882937.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:57.931Z,1478882937.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:58.196Z,1478882938.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:58.336Z,1478882938.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:58.729Z,1478882938.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:58.992Z,1478882938.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:59.134Z,1478882939.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:59.526Z,1478882939.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:48:59.788Z,1478882939.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:48:59.951Z,1478882939.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:00.301Z,1478882940.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:00.345Z,1478882940.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:00.737Z,1478882940.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:01.098Z,1478882941.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:01.138Z,1478882941.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:01.536Z,1478882941.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:01.894Z,1478882941.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:01.941Z,1478882941.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:02.329Z,1478882942.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:02.648Z,1478882942.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:02.740Z,1478882942.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:03.140Z,1478882943.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:03.445Z,1478882943.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:03.541Z,1478882943.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:03.933Z,1478882943.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:04.240Z,1478882944.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:04.329Z,1478882944.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:04.648Z,1478882944.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:04.732Z,1478882944.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:05.129Z,1478882945.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:05.444Z,1478882945.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:05.525Z,1478882945.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:05.929Z,1478882945.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:06.172Z,1478882946.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:06.333Z,1478882946.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:06.757Z,1478882946.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:06.968Z,1478882946.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:07.134Z,1478882947.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:07.535Z,1478882947.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:07.765Z,1478882947.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:07.933Z,1478882947.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:08.172Z,1478882948.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:08.329Z,1478882948.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:08.733Z,1478882948.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:08.968Z,1478882948.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:09.126Z,1478882949.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:09.533Z,1478882949.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:09.764Z,1478882949.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:09.919Z,1478882949.919 [BPC1](ERROR): Failed to receive battery data
2016-11-11T16:49:09.919Z,1478882949.919 [BPC1] Communications Fault, FailCount= 1
2016-11-11T16:49:09.919Z,1478882949.919 [BPC1](ERROR): Communications Fault
2016-11-11T16:49:09.928Z,1478882949.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:09.948Z,1478882949.948 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T16:49:10.184Z,1478882950.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:10.338Z,1478882950.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:10.733Z,1478882950.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:10.980Z,1478882950.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:11.133Z,1478882951.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:11.169Z,1478882951.169 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:49:11.169Z,1478882951.169 [BPC1] No Fault, FailCount= 1
2016-11-11T16:49:11.583Z,1478882951.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:11.779Z,1478882951.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:11.969Z,1478882951.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:12.188Z,1478882952.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:12.325Z,1478882952.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:12.720Z,1478882952.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:12.984Z,1478882952.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:13.125Z,1478882953.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:13.529Z,1478882953.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:13.780Z,1478882953.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:13.930Z,1478882953.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:14.264Z,1478882954.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:14.333Z,1478882954.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:14.729Z,1478882954.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:15.060Z,1478882955.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:15.126Z,1478882955.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:15.529Z,1478882955.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:15.856Z,1478882955.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:15.936Z,1478882955.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:16.333Z,1478882956.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:16.644Z,1478882956.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:16.730Z,1478882956.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:17.134Z,1478882957.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:17.440Z,1478882957.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:17.531Z,1478882957.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:17.930Z,1478882957.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:18.236Z,1478882958.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:18.330Z,1478882958.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:18.644Z,1478882958.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:18.725Z,1478882958.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:19.133Z,1478882959.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:19.440Z,1478882959.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:19.527Z,1478882959.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:19.924Z,1478882959.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:20.152Z,1478882960.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:20.333Z,1478882960.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:20.733Z,1478882960.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:20.948Z,1478882960.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:21.135Z,1478882961.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:21.533Z,1478882961.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:21.744Z,1478882961.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:21.933Z,1478882961.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:22.152Z,1478882962.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:22.330Z,1478882962.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:22.729Z,1478882962.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:22.948Z,1478882962.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:23.167Z,1478882963.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:23.533Z,1478882963.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:23.744Z,1478882963.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:23.954Z,1478882963.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:24.152Z,1478882964.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:24.343Z,1478882964.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:24.753Z,1478882964.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:24.948Z,1478882964.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:25.142Z,1478882965.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:25.546Z,1478882965.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:25.744Z,1478882965.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:25.941Z,1478882965.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:26.152Z,1478882966.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:26.321Z,1478882966.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:26.719Z,1478882966.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:26.948Z,1478882966.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:27.124Z,1478882967.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:27.522Z,1478882967.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:27.746Z,1478882967.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:27.928Z,1478882967.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:28.232Z,1478882968.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:28.323Z,1478882968.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:28.729Z,1478882968.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:29.028Z,1478882969.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:29.129Z,1478882969.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:29.523Z,1478882969.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:29.824Z,1478882969.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:29.927Z,1478882969.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:30.329Z,1478882970.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:30.596Z,1478882970.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:30.723Z,1478882970.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:31.127Z,1478882971.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:31.392Z,1478882971.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:31.524Z,1478882971.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:31.929Z,1478882971.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:32.188Z,1478882972.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:32.332Z,1478882972.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:32.616Z,1478882972.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:32.734Z,1478882972.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:33.132Z,1478882973.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:33.414Z,1478882973.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:33.533Z,1478882973.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:33.932Z,1478882973.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:34.120Z,1478882974.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:34.329Z,1478882974.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:34.916Z,1478882974.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:35.713Z,1478882975.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:36.140Z,1478882976.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:36.936Z,1478882976.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:37.732Z,1478882977.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:38.025Z,1478882978.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:38.134Z,1478882978.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:38.144Z,1478882978.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:38.569Z,1478882978.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:38.938Z,1478882978.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:38.940Z,1478882978.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:39.366Z,1478882979.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:39.736Z,1478882979.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:39.782Z,1478882979.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:40.137Z,1478882980.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:40.148Z,1478882980.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:40.538Z,1478882980.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:40.937Z,1478882980.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:40.944Z,1478882980.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:41.342Z,1478882981.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:41.732Z,1478882981.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:41.740Z,1478882981.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:42.144Z,1478882982.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:42.252Z,1478882982.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:42.544Z,1478882982.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:42.938Z,1478882982.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:43.048Z,1478882983.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:43.329Z,1478882983.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:43.733Z,1478882983.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:43.844Z,1478882983.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:44.188Z,1478882984.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:44.532Z,1478882984.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:44.600Z,1478882984.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:44.930Z,1478882984.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:45.331Z,1478882985.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:45.396Z,1478882985.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:45.739Z,1478882985.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:46.192Z,1478882986.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:46.204Z,1478882986.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:46.534Z,1478882986.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:46.600Z,1478882986.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:46.934Z,1478882986.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:47.337Z,1478882987.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:47.396Z,1478882987.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:47.753Z,1478882987.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:48.144Z,1478882988.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:48.144Z,1478882988.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:48.545Z,1478882988.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:48.938Z,1478882988.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:48.940Z,1478882988.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:49.337Z,1478882989.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:49.736Z,1478882989.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:49.755Z,1478882989.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:50.144Z,1478882990.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:50.146Z,1478882990.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:50.561Z,1478882990.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:50.940Z,1478882990.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:50.942Z,1478882990.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:51.331Z,1478882991.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:51.736Z,1478882991.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:51.788Z,1478882991.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:52.144Z,1478882992.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:52.145Z,1478882992.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:52.540Z,1478882992.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:52.940Z,1478882992.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:52.998Z,1478882992.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:53.344Z,1478882993.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:53.736Z,1478882993.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:53.759Z,1478882993.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:54.136Z,1478882994.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:54.144Z,1478882994.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:54.569Z,1478882994.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:54.931Z,1478882994.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:54.940Z,1478882994.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:55.336Z,1478882995.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:55.738Z,1478882995.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:55.806Z,1478882995.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:56.132Z,1478882996.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:56.224Z,1478882996.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:56.541Z,1478882996.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:56.942Z,1478882996.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:57.020Z,1478882997.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:57.333Z,1478882997.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:57.743Z,1478882997.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:57.817Z,1478882997.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:58.178Z,1478882998.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:58.540Z,1478882998.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:58.600Z,1478882998.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:58.944Z,1478882998.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:59.329Z,1478882999.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:49:59.396Z,1478882999.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:49:59.724Z,1478882999.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:00.174Z,1478883000.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:00.192Z,1478883000.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:00.531Z,1478883000.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:00.608Z,1478883000.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:00.930Z,1478883000.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:01.336Z,1478883001.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:01.404Z,1478883001.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:01.738Z,1478883001.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:02.080Z,1478883002.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:02.145Z,1478883002.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:02.536Z,1478883002.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:02.876Z,1478883002.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:02.947Z,1478883002.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:03.334Z,1478883003.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:03.672Z,1478883003.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:03.745Z,1478883003.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:04.080Z,1478883004.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:04.145Z,1478883004.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:04.537Z,1478883004.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:04.879Z,1478883004.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:04.949Z,1478883004.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:05.409Z,1478883005.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:05.676Z,1478883005.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:05.746Z,1478883005.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:06.084Z,1478883006.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:06.173Z,1478883006.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:06.531Z,1478883006.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:06.880Z,1478883006.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:06.977Z,1478883006.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:07.333Z,1478883007.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:07.676Z,1478883007.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:07.771Z,1478883007.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:08.084Z,1478883008.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:08.161Z,1478883008.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:08.540Z,1478883008.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:08.880Z,1478883008.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:08.956Z,1478883008.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:09.350Z,1478883009.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:09.676Z,1478883009.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:09.820Z,1478883009.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:10.151Z,1478883010.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:10.220Z,1478883010.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:10.529Z,1478883010.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:10.929Z,1478883010.929 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:10.930Z,1478883010.930 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 220
2016-11-11T16:50:10.930Z,1478883010.930 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:50:10.937Z,1478883010.937 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:10.937Z,1478883010.937 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 220
2016-11-11T16:50:10.937Z,1478883010.937 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:50:10.939Z,1478883010.939 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:10.955Z,1478883010.955 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 220
2016-11-11T16:50:10.955Z,1478883010.955 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:50:10.982Z,1478883010.982 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:50:10.982Z,1478883010.982 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:50:10.982Z,1478883010.982 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:50:11.016Z,1478883011.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:11.389Z,1478883011.389 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:50:11.389Z,1478883011.389 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 220
2016-11-11T16:50:11.390Z,1478883011.390 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:50:11.390Z,1478883011.390 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 220
2016-11-11T16:50:11.391Z,1478883011.391 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:50:11.391Z,1478883011.391 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 220
2016-11-11T16:50:11.729Z,1478883011.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:50:11.729Z,1478883011.729 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:50:11.729Z,1478883011.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:50:11.734Z,1478883011.734 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:50:11.735Z,1478883011.735 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:50:11.735Z,1478883011.735 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:50:11.736Z,1478883011.736 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:50:11.736Z,1478883011.736 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:50:11.736Z,1478883011.736 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:50:11.812Z,1478883011.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:12.164Z,1478883012.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:12.542Z,1478883012.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:12.576Z,1478883012.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:12.936Z,1478883012.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:13.340Z,1478883013.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:13.372Z,1478883013.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:13.742Z,1478883013.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:14.148Z,1478883014.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:14.168Z,1478883014.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:14.541Z,1478883014.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:14.608Z,1478883014.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:14.941Z,1478883014.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:15.324Z,1478883015.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:15.404Z,1478883015.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:15.759Z,1478883015.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:16.056Z,1478883016.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:16.153Z,1478883016.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:16.531Z,1478883016.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:16.852Z,1478883016.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:16.936Z,1478883016.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:17.337Z,1478883017.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:17.649Z,1478883017.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:17.738Z,1478883017.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:18.060Z,1478883018.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:18.133Z,1478883018.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:18.537Z,1478883018.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:18.856Z,1478883018.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:18.957Z,1478883018.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:19.341Z,1478883019.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:19.652Z,1478883019.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:19.744Z,1478883019.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:20.060Z,1478883020.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:20.157Z,1478883020.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:20.543Z,1478883020.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:20.856Z,1478883020.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:20.944Z,1478883020.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:21.358Z,1478883021.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:21.652Z,1478883021.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:21.753Z,1478883021.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:22.060Z,1478883022.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:22.166Z,1478883022.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:22.562Z,1478883022.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:22.856Z,1478883022.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:22.936Z,1478883022.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:23.337Z,1478883023.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:23.652Z,1478883023.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:23.780Z,1478883023.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:24.131Z,1478883024.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:24.196Z,1478883024.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:24.531Z,1478883024.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:24.946Z,1478883024.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:24.992Z,1478883024.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:25.343Z,1478883025.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:25.740Z,1478883025.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:25.788Z,1478883025.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:26.157Z,1478883026.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:26.543Z,1478883026.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:26.548Z,1478883026.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:26.932Z,1478883026.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:27.331Z,1478883027.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:27.344Z,1478883027.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:27.741Z,1478883027.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:28.140Z,1478883028.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:28.156Z,1478883028.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:28.534Z,1478883028.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:28.548Z,1478883028.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:28.942Z,1478883028.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:29.328Z,1478883029.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:29.344Z,1478883029.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:29.736Z,1478883029.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:30.036Z,1478883030.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:30.128Z,1478883030.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:30.532Z,1478883030.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:30.832Z,1478883030.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:30.932Z,1478883030.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:31.341Z,1478883031.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:31.628Z,1478883031.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:31.740Z,1478883031.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:32.036Z,1478883032.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:32.134Z,1478883032.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:32.534Z,1478883032.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:32.832Z,1478883032.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:32.945Z,1478883032.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:33.357Z,1478883033.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:33.628Z,1478883033.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:33.745Z,1478883033.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:33.753Z,1478883033.753 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T16:50:33.754Z,1478883033.754 [Default:CheckIn:C.Wait] Stopped
2016-11-11T16:50:33.754Z,1478883033.754 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T16:50:33.754Z,1478883033.754 [Default:CheckIn:D] Running Loop=1
2016-11-11T16:50:34.036Z,1478883034.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:34.149Z,1478883034.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:34.158Z,1478883034.158 [Default:CheckIn:D] Stopped
2016-11-11T16:50:34.158Z,1478883034.158 [Default:CheckIn:E] Running Loop=1
2016-11-11T16:50:34.569Z,1478883034.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:34.592Z,1478883034.592 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 720.547461 min 
2016-11-11T16:50:34.592Z,1478883034.592 [Default:CheckIn:E] Stopped
2016-11-11T16:50:34.592Z,1478883034.592 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T16:50:34.592Z,1478883034.592 [Default:CheckIn] Stopped
2016-11-11T16:50:34.592Z,1478883034.592 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T16:50:34.592Z,1478883034.592 [Default:CheckIn](INFO): Running loop #70
2016-11-11T16:50:34.593Z,1478883034.593 [Default:CheckIn] Running Loop=70
2016-11-11T16:50:34.593Z,1478883034.593 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T16:50:34.593Z,1478883034.593 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T16:50:34.832Z,1478883034.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:35.630Z,1478883035.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:36.048Z,1478883036.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:36.844Z,1478883036.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:37.640Z,1478883037.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:38.125Z,1478883038.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:38.152Z,1478883038.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:38.231Z,1478883038.231 [NAL9602](INFO): Powering up
2016-11-11T16:50:38.311Z,1478883038.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:38.679Z,1478883038.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:38.950Z,1478883038.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:39.108Z,1478883039.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:39.479Z,1478883039.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:39.744Z,1478883039.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:39.898Z,1478883039.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:40.328Z,1478883040.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:40.488Z,1478883040.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:40.681Z,1478883040.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:41.083Z,1478883041.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:41.284Z,1478883041.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:41.485Z,1478883041.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:41.876Z,1478883041.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:42.081Z,1478883042.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:42.288Z,1478883042.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:42.488Z,1478883042.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:42.689Z,1478883042.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:43.089Z,1478883043.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:43.284Z,1478883043.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:43.469Z,1478883043.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:43.869Z,1478883043.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:44.016Z,1478883044.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:44.270Z,1478883044.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:44.677Z,1478883044.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:44.812Z,1478883044.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:45.075Z,1478883045.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:45.471Z,1478883045.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:45.608Z,1478883045.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:45.891Z,1478883045.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:46.016Z,1478883046.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:46.269Z,1478883046.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:46.672Z,1478883046.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:46.812Z,1478883046.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:47.071Z,1478883047.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:47.476Z,1478883047.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:47.609Z,1478883047.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:47.879Z,1478883047.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:48.020Z,1478883048.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:48.280Z,1478883048.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:48.687Z,1478883048.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:48.816Z,1478883048.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:49.033Z,1478883049.033 [NAL9602](INFO): NAL9602 initialized
2016-11-11T16:50:49.085Z,1478883049.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:49.484Z,1478883049.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:49.612Z,1478883049.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:49.833Z,1478883049.833 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T16:50:49.833Z,1478883049.833 [NAL9602] Data Fault, FailCount= 5
2016-11-11T16:50:49.833Z,1478883049.833 [NAL9602](ERROR): Data Fault
2016-11-11T16:50:49.869Z,1478883049.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:49.926Z,1478883049.926 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T16:50:49.927Z,1478883049.927 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-11-11T16:50:50.028Z,1478883050.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:50.233Z,1478883050.233 [NAL9602](INFO): Powering down
2016-11-11T16:50:50.281Z,1478883050.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:50.713Z,1478883050.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:50.824Z,1478883050.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:51.069Z,1478883051.069 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T16:50:51.069Z,1478883051.069 [BPC1] Data Fault, FailCount= 1
2016-11-11T16:50:51.070Z,1478883051.070 [BPC1](ERROR): Data Fault
2016-11-11T16:50:51.078Z,1478883051.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:51.119Z,1478883051.118 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T16:50:51.470Z,1478883051.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:51.620Z,1478883051.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:51.877Z,1478883051.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:52.112Z,1478883052.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:52.280Z,1478883052.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:52.313Z,1478883052.313 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:50:52.313Z,1478883052.313 [BPC1] No Fault, FailCount= 1
2016-11-11T16:50:52.725Z,1478883052.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:52.908Z,1478883052.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:53.080Z,1478883053.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:53.516Z,1478883053.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:53.706Z,1478883053.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:53.878Z,1478883053.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:54.285Z,1478883054.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:54.468Z,1478883054.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:54.669Z,1478883054.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:55.069Z,1478883055.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:55.264Z,1478883055.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:55.471Z,1478883055.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:55.882Z,1478883055.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:56.060Z,1478883056.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:56.270Z,1478883056.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:56.468Z,1478883056.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:56.674Z,1478883056.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:57.083Z,1478883057.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:57.264Z,1478883057.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:57.474Z,1478883057.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:57.880Z,1478883057.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:58.008Z,1478883058.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:58.285Z,1478883058.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:58.680Z,1478883058.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:58.804Z,1478883058.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:59.080Z,1478883059.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:59.481Z,1478883059.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:50:59.600Z,1478883059.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:50:59.870Z,1478883059.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:00.016Z,1478883060.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:00.269Z,1478883060.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:00.682Z,1478883060.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:00.812Z,1478883060.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:01.072Z,1478883061.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:01.477Z,1478883061.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:01.608Z,1478883061.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:01.890Z,1478883061.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:02.016Z,1478883062.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:02.264Z,1478883062.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:02.669Z,1478883062.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:02.812Z,1478883062.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:03.069Z,1478883063.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:03.471Z,1478883063.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:03.608Z,1478883063.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:03.877Z,1478883063.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:04.016Z,1478883064.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:04.305Z,1478883064.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:04.686Z,1478883064.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:04.812Z,1478883064.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:05.111Z,1478883065.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:05.466Z,1478883065.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:05.608Z,1478883065.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:05.875Z,1478883065.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:06.084Z,1478883066.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:06.308Z,1478883066.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:06.670Z,1478883066.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:06.880Z,1478883066.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:07.106Z,1478883067.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:07.506Z,1478883067.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:07.676Z,1478883067.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:07.873Z,1478883067.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:08.270Z,1478883068.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:08.444Z,1478883068.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:08.680Z,1478883068.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:09.077Z,1478883069.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:09.240Z,1478883069.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:09.478Z,1478883069.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:09.879Z,1478883069.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:10.036Z,1478883070.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:10.277Z,1478883070.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:10.444Z,1478883070.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:10.680Z,1478883070.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:11.073Z,1478883071.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:11.242Z,1478883071.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:11.470Z,1478883071.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:11.879Z,1478883071.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:11.980Z,1478883071.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:12.281Z,1478883072.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:12.683Z,1478883072.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:12.776Z,1478883072.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:13.076Z,1478883073.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:13.483Z,1478883073.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:13.572Z,1478883073.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:13.884Z,1478883073.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:13.996Z,1478883073.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:14.280Z,1478883074.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:14.663Z,1478883074.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:14.792Z,1478883074.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:15.092Z,1478883075.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:15.487Z,1478883075.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:15.588Z,1478883075.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:15.905Z,1478883075.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:15.996Z,1478883075.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:16.288Z,1478883076.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:16.674Z,1478883076.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:16.792Z,1478883076.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:17.081Z,1478883077.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:17.472Z,1478883077.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:17.588Z,1478883077.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:17.857Z,1478883077.857 [BPC1](ERROR): Failed to parse message.
2016-11-11T16:51:17.857Z,1478883077.857 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T16:51:17.857Z,1478883077.857 [BPC1] Data Fault, FailCount= 1
2016-11-11T16:51:17.857Z,1478883077.857 [BPC1](ERROR): Data Fault
2016-11-11T16:51:17.895Z,1478883077.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:17.943Z,1478883077.944 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T16:51:17.996Z,1478883077.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:18.273Z,1478883078.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:18.677Z,1478883078.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:18.792Z,1478883078.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:19.074Z,1478883079.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:19.115Z,1478883079.115 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:51:19.115Z,1478883079.115 [BPC1] No Fault, FailCount= 1
2016-11-11T16:51:19.526Z,1478883079.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:19.588Z,1478883079.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:19.914Z,1478883079.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:20.064Z,1478883080.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:20.274Z,1478883080.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:20.671Z,1478883080.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:20.860Z,1478883080.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:21.071Z,1478883081.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:21.474Z,1478883081.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:21.656Z,1478883081.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:21.881Z,1478883081.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:22.277Z,1478883082.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:22.424Z,1478883082.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:22.674Z,1478883082.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:23.080Z,1478883083.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:23.220Z,1478883083.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:23.488Z,1478883083.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:23.876Z,1478883083.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:24.016Z,1478883084.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:24.272Z,1478883084.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:24.424Z,1478883084.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:24.666Z,1478883084.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:25.071Z,1478883085.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:25.220Z,1478883085.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:25.469Z,1478883085.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:25.883Z,1478883085.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:25.980Z,1478883085.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:26.276Z,1478883086.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:26.680Z,1478883086.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:26.776Z,1478883086.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:27.092Z,1478883087.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:27.514Z,1478883087.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:27.572Z,1478883087.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:27.878Z,1478883087.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:27.988Z,1478883087.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:28.282Z,1478883088.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:28.674Z,1478883088.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:28.784Z,1478883088.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:29.089Z,1478883089.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:29.525Z,1478883089.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:29.580Z,1478883089.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:29.874Z,1478883089.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:29.988Z,1478883089.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:30.274Z,1478883090.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:30.675Z,1478883090.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:30.784Z,1478883090.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:31.076Z,1478883091.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:31.511Z,1478883091.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:31.580Z,1478883091.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:31.921Z,1478883091.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:31.988Z,1478883091.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:32.283Z,1478883092.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:32.705Z,1478883092.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:32.784Z,1478883092.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:33.071Z,1478883093.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:33.482Z,1478883093.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:33.581Z,1478883093.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:33.884Z,1478883093.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:34.044Z,1478883094.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:34.282Z,1478883094.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:34.681Z,1478883094.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:34.840Z,1478883094.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:35.636Z,1478883095.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:36.420Z,1478883096.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:37.216Z,1478883097.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:38.012Z,1478883098.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:38.085Z,1478883098.085 [BPC1](ERROR): Failed to receive battery data
2016-11-11T16:51:38.085Z,1478883098.085 [BPC1] Communications Fault, FailCount= 2
2016-11-11T16:51:38.085Z,1478883098.085 [BPC1](ERROR): Communications Fault
2016-11-11T16:51:38.093Z,1478883098.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:38.142Z,1478883098.142 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T16:51:38.237Z,1478883098.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:38.422Z,1478883098.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:38.613Z,1478883098.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:39.018Z,1478883099.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:39.050Z,1478883099.050 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:51:39.050Z,1478883099.050 [BPC1] No Fault, FailCount= 2
2016-11-11T16:51:39.216Z,1478883099.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:39.510Z,1478883099.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:39.849Z,1478883099.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:39.972Z,1478883099.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:40.209Z,1478883100.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:40.610Z,1478883100.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:40.768Z,1478883100.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:41.021Z,1478883101.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:41.411Z,1478883101.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:41.564Z,1478883101.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:41.801Z,1478883101.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:41.972Z,1478883101.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:42.205Z,1478883102.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:42.630Z,1478883102.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:42.768Z,1478883102.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:43.006Z,1478883103.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:43.539Z,1478883103.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:43.568Z,1478883103.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:43.838Z,1478883103.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:43.976Z,1478883103.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:44.204Z,1478883104.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:44.610Z,1478883104.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:44.772Z,1478883104.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:45.010Z,1478883105.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:45.414Z,1478883105.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:45.568Z,1478883105.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:45.817Z,1478883105.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:45.976Z,1478883105.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:46.220Z,1478883106.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:46.616Z,1478883106.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:46.772Z,1478883106.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:47.021Z,1478883107.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:47.454Z,1478883107.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:47.569Z,1478883107.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:47.805Z,1478883107.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:48.028Z,1478883108.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:48.230Z,1478883108.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:48.628Z,1478883108.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:48.824Z,1478883108.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:49.054Z,1478883109.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:49.415Z,1478883109.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:49.620Z,1478883109.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:49.813Z,1478883109.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:50.220Z,1478883110.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:50.376Z,1478883110.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:50.619Z,1478883110.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:51.022Z,1478883111.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:51.172Z,1478883111.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:51.414Z,1478883111.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:51.868Z,1478883111.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:51.969Z,1478883111.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:52.208Z,1478883112.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:52.420Z,1478883112.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:52.649Z,1478883112.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:53.013Z,1478883113.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:53.216Z,1478883113.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:53.486Z,1478883113.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:53.849Z,1478883113.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:53.948Z,1478883113.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:54.214Z,1478883114.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:54.613Z,1478883114.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:54.744Z,1478883114.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:55.010Z,1478883115.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:55.418Z,1478883115.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:55.540Z,1478883115.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:55.825Z,1478883115.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:55.948Z,1478883115.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:56.208Z,1478883116.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:56.613Z,1478883116.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:56.744Z,1478883116.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:57.008Z,1478883117.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:57.409Z,1478883117.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:57.540Z,1478883117.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:57.810Z,1478883117.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:57.948Z,1478883117.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:58.220Z,1478883118.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:58.621Z,1478883118.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:58.746Z,1478883118.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:59.021Z,1478883119.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:59.424Z,1478883119.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:59.540Z,1478883119.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:51:59.824Z,1478883119.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:51:59.948Z,1478883119.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:00.249Z,1478883120.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:00.630Z,1478883120.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:00.744Z,1478883120.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:01.016Z,1478883121.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:01.414Z,1478883121.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:01.541Z,1478883121.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:01.826Z,1478883121.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:02.004Z,1478883122.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:02.274Z,1478883122.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:02.628Z,1478883122.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:02.801Z,1478883122.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:03.029Z,1478883123.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:03.427Z,1478883123.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:03.596Z,1478883123.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:03.838Z,1478883123.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:04.263Z,1478883124.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:04.396Z,1478883124.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:04.630Z,1478883124.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:05.050Z,1478883125.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:05.192Z,1478883125.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:05.469Z,1478883125.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:05.957Z,1478883125.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:05.988Z,1478883125.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:06.263Z,1478883126.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:06.448Z,1478883126.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:06.644Z,1478883126.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:07.058Z,1478883127.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:07.244Z,1478883127.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:07.484Z,1478883127.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:07.882Z,1478883127.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:07.960Z,1478883127.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:08.258Z,1478883128.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:08.642Z,1478883128.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:08.756Z,1478883128.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:09.040Z,1478883129.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:09.477Z,1478883129.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:09.552Z,1478883129.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:09.832Z,1478883129.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:10.233Z,1478883130.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:10.348Z,1478883130.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:10.628Z,1478883130.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:11.041Z,1478883131.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:11.144Z,1478883131.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:11.436Z,1478883131.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:11.835Z,1478883131.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:11.940Z,1478883131.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:12.222Z,1478883132.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:12.630Z,1478883132.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:12.736Z,1478883132.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:13.002Z,1478883133.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:13.405Z,1478883133.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:13.532Z,1478883133.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:13.805Z,1478883133.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:14.202Z,1478883134.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:14.328Z,1478883134.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:14.626Z,1478883134.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:15.010Z,1478883135.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:15.124Z,1478883135.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:15.414Z,1478883135.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:15.802Z,1478883135.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:15.920Z,1478883135.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:16.209Z,1478883136.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:16.611Z,1478883136.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:16.716Z,1478883136.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:17.048Z,1478883137.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:17.434Z,1478883137.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:17.512Z,1478883137.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:17.812Z,1478883137.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:18.211Z,1478883138.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:18.308Z,1478883138.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:18.610Z,1478883138.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:19.029Z,1478883139.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:19.104Z,1478883139.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:19.405Z,1478883139.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:19.809Z,1478883139.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:19.901Z,1478883139.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:20.257Z,1478883140.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:20.633Z,1478883140.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:20.696Z,1478883140.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:21.054Z,1478883141.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:21.415Z,1478883141.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:21.492Z,1478883141.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:21.834Z,1478883141.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:22.261Z,1478883142.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:22.288Z,1478883142.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:22.619Z,1478883142.619 [PNI_TCM](ERROR): CRC does not match. Expected:0x6017 got:0x6978
2016-11-11T16:52:22.649Z,1478883142.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:23.009Z,1478883143.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:23.084Z,1478883143.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:23.426Z,1478883143.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:23.825Z,1478883143.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:23.880Z,1478883143.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:24.209Z,1478883144.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:24.610Z,1478883144.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:24.676Z,1478883144.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:25.008Z,1478883145.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:25.425Z,1478883145.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:25.472Z,1478883145.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:25.809Z,1478883145.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:26.205Z,1478883146.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:26.268Z,1478883146.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:26.606Z,1478883146.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:27.033Z,1478883147.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:27.064Z,1478883147.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:27.403Z,1478883147.404 [PNI_TCM](ERROR): CRC does not match. Expected:0x50330 got:0x19715
2016-11-11T16:52:27.433Z,1478883147.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:27.808Z,1478883147.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:27.860Z,1478883147.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:28.206Z,1478883148.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:28.625Z,1478883148.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:28.656Z,1478883148.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:28.999Z,1478883148.999 [PNI_TCM](ERROR): CRC does not match. Expected:0x55099 got:0x8591
2016-11-11T16:52:29.025Z,1478883149.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:29.408Z,1478883149.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:29.452Z,1478883149.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:29.828Z,1478883149.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:30.080Z,1478883150.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:30.267Z,1478883150.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:30.488Z,1478883150.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:30.623Z,1478883150.622 [PNI_TCM](ERROR): CRC does not match. Expected:0x59065 got:0x10268
2016-11-11T16:52:30.661Z,1478883150.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:30.896Z,1478883150.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:31.034Z,1478883151.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:31.304Z,1478883151.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:31.418Z,1478883151.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:31.712Z,1478883151.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:31.878Z,1478883151.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:32.120Z,1478883152.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:32.197Z,1478883152.197 [PNI_TCM](ERROR): CRC does not match. Expected:0x12114 got:0x55303
2016-11-11T16:52:32.221Z,1478883152.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:32.528Z,1478883152.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:32.634Z,1478883152.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:32.936Z,1478883152.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:33.047Z,1478883153.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:33.344Z,1478883153.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:33.410Z,1478883153.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:33.752Z,1478883153.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:33.981Z,1478883153.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:34.160Z,1478883154.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:34.255Z,1478883154.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:34.572Z,1478883154.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:34.650Z,1478883154.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:34.981Z,1478883154.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:35.038Z,1478883155.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:35.776Z,1478883155.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:36.184Z,1478883156.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:36.980Z,1478883156.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:37.776Z,1478883157.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:38.184Z,1478883158.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:38.980Z,1478883158.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:39.776Z,1478883159.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:40.188Z,1478883160.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:40.984Z,1478883160.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:41.780Z,1478883161.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:42.188Z,1478883162.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:42.984Z,1478883162.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:43.780Z,1478883163.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:43.852Z,1478883163.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:44.022Z,1478883164.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:44.188Z,1478883164.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:44.401Z,1478883164.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:44.781Z,1478883164.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:44.984Z,1478883164.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:45.186Z,1478883165.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:45.589Z,1478883165.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:45.780Z,1478883165.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:46.017Z,1478883166.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:46.316Z,1478883166.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:46.375Z,1478883166.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:46.781Z,1478883166.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:47.112Z,1478883167.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:47.182Z,1478883167.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:47.583Z,1478883167.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:47.908Z,1478883167.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:47.977Z,1478883167.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:48.316Z,1478883168.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:48.384Z,1478883168.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:48.786Z,1478883168.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:49.112Z,1478883169.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:49.197Z,1478883169.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:49.587Z,1478883169.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:49.866Z,1478883169.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:49.981Z,1478883169.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:50.022Z,1478883170.022 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T16:52:50.022Z,1478883170.022 [NAL9602] No Fault, FailCount= 5
2016-11-11T16:52:50.336Z,1478883170.336 [NAL9602](INFO): Powering up NAL9602
2016-11-11T16:52:50.390Z,1478883170.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:50.660Z,1478883170.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:50.789Z,1478883170.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:51.172Z,1478883171.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:51.456Z,1478883171.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:51.567Z,1478883171.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:51.864Z,1478883171.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:51.967Z,1478883171.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:52.374Z,1478883172.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:52.660Z,1478883172.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:52.768Z,1478883172.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:53.169Z,1478883173.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:53.456Z,1478883173.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:53.576Z,1478883173.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:53.864Z,1478883173.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:53.968Z,1478883173.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:54.373Z,1478883174.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:54.660Z,1478883174.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:54.784Z,1478883174.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:55.186Z,1478883175.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:55.456Z,1478883175.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:55.585Z,1478883175.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:55.864Z,1478883175.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:55.965Z,1478883175.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:56.365Z,1478883176.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:56.660Z,1478883176.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:56.817Z,1478883176.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:57.172Z,1478883177.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:57.462Z,1478883177.462 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:57.583Z,1478883177.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:57.916Z,1478883177.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:57.977Z,1478883177.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:58.371Z,1478883178.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:58.712Z,1478883178.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:58.777Z,1478883178.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:59.178Z,1478883179.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:59.508Z,1478883179.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:52:59.566Z,1478883179.566 [BPC1](ERROR): Failed to receive battery data
2016-11-11T16:52:59.566Z,1478883179.566 [BPC1] Communications Fault, FailCount= 1
2016-11-11T16:52:59.566Z,1478883179.566 [BPC1](ERROR): Communications Fault
2016-11-11T16:52:59.575Z,1478883179.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:52:59.595Z,1478883179.595 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T16:52:59.979Z,1478883179.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:00.272Z,1478883180.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:00.379Z,1478883180.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:00.776Z,1478883180.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:00.796Z,1478883180.796 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:53:00.797Z,1478883180.796 [BPC1] No Fault, FailCount= 1
2016-11-11T16:53:01.068Z,1478883181.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:01.240Z,1478883181.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:01.529Z,1478883181.529 [NAL9602](INFO): NAL9602 initialized
2016-11-11T16:53:01.614Z,1478883181.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:01.864Z,1478883181.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:01.976Z,1478883181.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:02.272Z,1478883182.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:02.391Z,1478883182.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:02.784Z,1478883182.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:03.068Z,1478883183.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:03.188Z,1478883183.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:03.565Z,1478883183.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:03.796Z,1478883183.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:03.969Z,1478883183.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:04.375Z,1478883184.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:04.592Z,1478883184.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:04.774Z,1478883184.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:05.177Z,1478883185.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:05.389Z,1478883185.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:05.567Z,1478883185.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:05.796Z,1478883185.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:05.977Z,1478883185.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:06.381Z,1478883186.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:06.592Z,1478883186.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:06.850Z,1478883186.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:07.173Z,1478883187.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:07.388Z,1478883187.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:07.577Z,1478883187.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:07.804Z,1478883187.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:07.966Z,1478883187.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:08.379Z,1478883188.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:08.600Z,1478883188.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:08.780Z,1478883188.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:09.182Z,1478883189.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:09.396Z,1478883189.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:09.583Z,1478883189.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:09.808Z,1478883189.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:09.992Z,1478883189.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:10.386Z,1478883190.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:10.604Z,1478883190.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:10.777Z,1478883190.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:11.181Z,1478883191.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:11.400Z,1478883191.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:11.589Z,1478883191.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:11.892Z,1478883191.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:11.978Z,1478883191.977 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:11.978Z,1478883191.978 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 221
2016-11-11T16:53:11.978Z,1478883191.978 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:53:11.993Z,1478883191.993 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:11.993Z,1478883191.993 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 221
2016-11-11T16:53:11.993Z,1478883191.993 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:53:12.003Z,1478883192.003 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:12.003Z,1478883192.003 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 221
2016-11-11T16:53:12.003Z,1478883192.003 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:53:12.026Z,1478883192.026 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:53:12.027Z,1478883192.027 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:53:12.033Z,1478883192.033 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:53:12.395Z,1478883192.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:53:12.396Z,1478883192.395 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 221
2016-11-11T16:53:12.396Z,1478883192.396 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:53:12.396Z,1478883192.396 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 221
2016-11-11T16:53:12.397Z,1478883192.397 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:53:12.397Z,1478883192.397 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 221
2016-11-11T16:53:12.688Z,1478883192.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:12.792Z,1478883192.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:53:12.793Z,1478883192.793 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:53:12.793Z,1478883192.793 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:53:12.802Z,1478883192.802 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:53:12.802Z,1478883192.802 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:53:12.803Z,1478883192.803 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:53:12.811Z,1478883192.811 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:53:12.812Z,1478883192.812 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:53:12.812Z,1478883192.812 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:53:13.173Z,1478883193.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:13.484Z,1478883193.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:13.577Z,1478883193.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:14.008Z,1478883194.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:14.252Z,1478883194.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:14.389Z,1478883194.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:14.817Z,1478883194.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:15.048Z,1478883195.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:15.218Z,1478883195.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:15.590Z,1478883195.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:15.844Z,1478883195.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:15.981Z,1478883195.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:16.252Z,1478883196.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:16.377Z,1478883196.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:16.786Z,1478883196.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:17.048Z,1478883197.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:17.181Z,1478883197.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:17.567Z,1478883197.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:17.776Z,1478883197.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:17.989Z,1478883197.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:18.377Z,1478883198.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:18.572Z,1478883198.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:18.770Z,1478883198.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:19.178Z,1478883199.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:19.368Z,1478883199.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:19.583Z,1478883199.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:19.776Z,1478883199.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:19.978Z,1478883199.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:20.397Z,1478883200.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:20.572Z,1478883200.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:20.783Z,1478883200.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:21.180Z,1478883201.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:21.368Z,1478883201.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:21.578Z,1478883201.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:21.776Z,1478883201.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:21.985Z,1478883201.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:22.361Z,1478883202.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:22.574Z,1478883202.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:22.765Z,1478883202.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:23.173Z,1478883203.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:23.368Z,1478883203.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:23.571Z,1478883203.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:23.780Z,1478883203.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:23.973Z,1478883203.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:24.376Z,1478883204.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:24.576Z,1478883204.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:24.781Z,1478883204.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:25.183Z,1478883205.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:25.372Z,1478883205.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:25.621Z,1478883205.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:25.868Z,1478883205.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:25.978Z,1478883205.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:26.377Z,1478883206.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:26.664Z,1478883206.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:26.766Z,1478883206.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:27.197Z,1478883207.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:27.460Z,1478883207.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:27.577Z,1478883207.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:28.003Z,1478883208.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:28.228Z,1478883208.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:28.367Z,1478883208.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:28.807Z,1478883208.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:29.024Z,1478883209.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:29.197Z,1478883209.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:29.576Z,1478883209.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:29.820Z,1478883209.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:29.995Z,1478883209.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:30.228Z,1478883210.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:30.389Z,1478883210.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:30.782Z,1478883210.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:31.024Z,1478883211.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:31.182Z,1478883211.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:31.579Z,1478883211.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:31.756Z,1478883211.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:31.970Z,1478883211.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:32.381Z,1478883212.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:32.552Z,1478883212.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:32.777Z,1478883212.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:33.176Z,1478883213.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:33.348Z,1478883213.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:33.578Z,1478883213.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:33.756Z,1478883213.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:33.977Z,1478883213.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:34.376Z,1478883214.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:34.552Z,1478883214.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:34.779Z,1478883214.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:35.187Z,1478883215.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:35.348Z,1478883215.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:35.756Z,1478883215.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:36.552Z,1478883216.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:37.348Z,1478883217.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:37.756Z,1478883217.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:38.552Z,1478883218.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:38.577Z,1478883218.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:38.724Z,1478883218.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:39.052Z,1478883219.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:39.348Z,1478883219.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:39.494Z,1478883219.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:39.885Z,1478883219.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:39.892Z,1478883219.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:40.257Z,1478883220.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:40.664Z,1478883220.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:40.688Z,1478883220.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:41.078Z,1478883221.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:41.465Z,1478883221.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:41.492Z,1478883221.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:41.877Z,1478883221.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:42.204Z,1478883222.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:42.289Z,1478883222.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:42.664Z,1478883222.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:42.000Z,1478883223.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:43.078Z,1478883223.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:43.477Z,1478883223.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:43.798Z,1478883223.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:43.883Z,1478883223.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:44.232Z,1478883224.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:44.282Z,1478883224.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:44.672Z,1478883224.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:45.029Z,1478883225.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:45.073Z,1478883225.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:45.444Z,1478883225.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:45.756Z,1478883225.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:45.873Z,1478883225.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:46.253Z,1478883226.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:46.552Z,1478883226.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:46.647Z,1478883226.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:47.052Z,1478883227.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:47.348Z,1478883227.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:47.451Z,1478883227.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:47.756Z,1478883227.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:47.852Z,1478883227.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:48.259Z,1478883228.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:48.552Z,1478883228.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:48.665Z,1478883228.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:49.066Z,1478883229.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:49.348Z,1478883229.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:49.461Z,1478883229.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:49.756Z,1478883229.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:49.865Z,1478883229.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:50.261Z,1478883230.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:50.552Z,1478883230.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:50.661Z,1478883230.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:51.065Z,1478883231.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:51.348Z,1478883231.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:51.461Z,1478883231.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:51.756Z,1478883231.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:51.862Z,1478883231.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:52.263Z,1478883232.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:52.552Z,1478883232.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:52.661Z,1478883232.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:53.071Z,1478883233.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:53.348Z,1478883233.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:53.486Z,1478883233.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:53.832Z,1478883233.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:53.880Z,1478883233.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:54.293Z,1478883234.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:54.629Z,1478883234.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:54.653Z,1478883234.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:55.062Z,1478883235.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:55.424Z,1478883235.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:55.489Z,1478883235.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:55.860Z,1478883235.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:56.184Z,1478883236.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:56.278Z,1478883236.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:56.665Z,1478883236.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:56.980Z,1478883236.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:57.101Z,1478883237.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:57.470Z,1478883237.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:57.776Z,1478883237.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:57.863Z,1478883237.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:58.184Z,1478883238.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:58.276Z,1478883238.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:58.678Z,1478883238.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:58.980Z,1478883238.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:59.076Z,1478883239.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:59.470Z,1478883239.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:53:59.712Z,1478883239.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:53:59.861Z,1478883239.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:00.268Z,1478883240.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:00.508Z,1478883240.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:00.665Z,1478883240.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:01.049Z,1478883241.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:01.306Z,1478883241.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:01.449Z,1478883241.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:01.716Z,1478883241.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:01.853Z,1478883241.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:02.261Z,1478883242.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:02.512Z,1478883242.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:02.656Z,1478883242.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:03.069Z,1478883243.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:03.308Z,1478883243.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:03.468Z,1478883243.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:03.716Z,1478883243.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:03.870Z,1478883243.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:04.265Z,1478883244.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:04.512Z,1478883244.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:04.661Z,1478883244.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:05.061Z,1478883245.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:05.308Z,1478883245.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:05.465Z,1478883245.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:05.716Z,1478883245.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:05.859Z,1478883245.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:06.260Z,1478883246.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:06.512Z,1478883246.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:06.664Z,1478883246.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:07.061Z,1478883247.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:07.308Z,1478883247.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:07.467Z,1478883247.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:07.804Z,1478883247.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:07.855Z,1478883247.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:08.306Z,1478883248.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:08.600Z,1478883248.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:08.679Z,1478883248.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:09.059Z,1478883249.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:09.396Z,1478883249.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:09.464Z,1478883249.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:09.873Z,1478883249.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:10.152Z,1478883250.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:10.257Z,1478883250.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:10.687Z,1478883250.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:10.948Z,1478883250.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:11.061Z,1478883251.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:11.498Z,1478883251.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:11.745Z,1478883251.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:11.882Z,1478883251.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:12.156Z,1478883252.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:12.258Z,1478883252.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:12.657Z,1478883252.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:12.952Z,1478883252.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:13.061Z,1478883253.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:13.476Z,1478883253.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:13.704Z,1478883253.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:13.870Z,1478883253.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:14.273Z,1478883254.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:14.500Z,1478883254.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:14.666Z,1478883254.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:15.064Z,1478883255.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:15.297Z,1478883255.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:15.464Z,1478883255.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:15.708Z,1478883255.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:15.863Z,1478883255.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:16.265Z,1478883256.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:16.504Z,1478883256.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:16.672Z,1478883256.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:17.065Z,1478883257.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:17.300Z,1478883257.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:17.473Z,1478883257.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:17.708Z,1478883257.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:17.849Z,1478883257.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:18.256Z,1478883258.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:18.504Z,1478883258.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:18.663Z,1478883258.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:19.059Z,1478883259.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:19.300Z,1478883259.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:19.489Z,1478883259.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:19.708Z,1478883259.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:19.861Z,1478883259.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:20.255Z,1478883260.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:20.504Z,1478883260.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:20.662Z,1478883260.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:21.061Z,1478883261.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:21.300Z,1478883261.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:21.465Z,1478883261.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:21.780Z,1478883261.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:21.854Z,1478883261.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:22.254Z,1478883262.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:22.576Z,1478883262.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:22.681Z,1478883262.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:23.064Z,1478883263.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:23.372Z,1478883263.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:23.464Z,1478883263.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:23.930Z,1478883263.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:24.132Z,1478883264.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:24.273Z,1478883264.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:24.697Z,1478883264.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:24.928Z,1478883264.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:25.072Z,1478883265.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:25.481Z,1478883265.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:25.724Z,1478883265.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:25.872Z,1478883265.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:26.132Z,1478883266.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:26.281Z,1478883266.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:26.649Z,1478883266.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:26.928Z,1478883266.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:27.053Z,1478883267.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:27.452Z,1478883267.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:27.660Z,1478883267.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:27.857Z,1478883267.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:28.261Z,1478883268.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:28.456Z,1478883268.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:28.652Z,1478883268.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:29.065Z,1478883269.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:29.252Z,1478883269.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:29.477Z,1478883269.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:29.676Z,1478883269.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:29.875Z,1478883269.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:30.262Z,1478883270.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:30.472Z,1478883270.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:30.657Z,1478883270.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:31.065Z,1478883271.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:31.268Z,1478883271.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:31.463Z,1478883271.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:31.676Z,1478883271.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:31.863Z,1478883271.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:32.265Z,1478883272.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:32.472Z,1478883272.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:32.664Z,1478883272.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:33.065Z,1478883273.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:33.268Z,1478883273.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:33.464Z,1478883273.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:33.676Z,1478883273.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:33.861Z,1478883273.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:34.275Z,1478883274.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:34.472Z,1478883274.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:34.678Z,1478883274.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:35.067Z,1478883275.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:35.268Z,1478883275.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:35.478Z,1478883275.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:35.752Z,1478883275.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:36.550Z,1478883276.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:37.344Z,1478883277.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:38.120Z,1478883278.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:38.865Z,1478883278.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:38.916Z,1478883278.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:38.981Z,1478883278.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:39.375Z,1478883279.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:39.712Z,1478883279.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:39.813Z,1478883279.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:40.120Z,1478883280.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:40.169Z,1478883280.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:40.585Z,1478883280.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:40.916Z,1478883280.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:40.984Z,1478883280.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:41.347Z,1478883281.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:41.640Z,1478883281.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:41.755Z,1478883281.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:42.153Z,1478883282.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:42.438Z,1478883282.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:42.551Z,1478883282.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:42.958Z,1478883282.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:43.232Z,1478883283.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:43.357Z,1478883283.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:43.644Z,1478883283.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:43.750Z,1478883283.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:44.150Z,1478883284.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:44.440Z,1478883284.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:44.563Z,1478883284.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:44.960Z,1478883284.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:45.264Z,1478883285.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:45.367Z,1478883285.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:45.676Z,1478883285.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:45.765Z,1478883285.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:46.160Z,1478883286.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:46.472Z,1478883286.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:46.561Z,1478883286.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:46.961Z,1478883286.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:47.268Z,1478883287.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:47.361Z,1478883287.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:47.676Z,1478883287.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:47.760Z,1478883287.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:48.161Z,1478883288.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:48.472Z,1478883288.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:48.557Z,1478883288.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:48.961Z,1478883288.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:49.269Z,1478883289.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:49.392Z,1478883289.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:49.759Z,1478883289.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:49.780Z,1478883289.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:50.157Z,1478883290.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:50.566Z,1478883290.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:50.584Z,1478883290.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:50.962Z,1478883290.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:51.377Z,1478883291.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:51.380Z,1478883291.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:51.766Z,1478883291.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:52.100Z,1478883292.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:52.162Z,1478883292.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:52.560Z,1478883292.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:52.896Z,1478883292.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:52.964Z,1478883292.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:53.381Z,1478883293.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:53.692Z,1478883293.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:53.742Z,1478883293.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:54.140Z,1478883294.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:54.160Z,1478883294.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:54.574Z,1478883294.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:54.936Z,1478883294.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:54.972Z,1478883294.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:55.379Z,1478883295.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:55.620Z,1478883295.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:55.785Z,1478883295.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:56.159Z,1478883296.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:56.416Z,1478883296.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:56.553Z,1478883296.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:56.985Z,1478883296.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:57.213Z,1478883297.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:57.357Z,1478883297.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:57.624Z,1478883297.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:57.753Z,1478883297.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:58.147Z,1478883298.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:58.422Z,1478883298.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:58.554Z,1478883298.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:58.953Z,1478883298.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:59.216Z,1478883299.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:59.356Z,1478883299.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:54:59.624Z,1478883299.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:54:59.756Z,1478883299.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:00.162Z,1478883300.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:00.420Z,1478883300.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:00.567Z,1478883300.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:00.963Z,1478883300.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:01.216Z,1478883301.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:01.378Z,1478883301.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:01.624Z,1478883301.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:01.753Z,1478883301.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:02.155Z,1478883302.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:02.420Z,1478883302.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:02.551Z,1478883302.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:02.953Z,1478883302.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:03.216Z,1478883303.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:03.360Z,1478883303.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:03.748Z,1478883303.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:03.754Z,1478883303.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:04.150Z,1478883304.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:04.544Z,1478883304.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:04.551Z,1478883304.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:04.969Z,1478883304.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:05.340Z,1478883305.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:05.372Z,1478883305.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:05.764Z,1478883305.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:06.080Z,1478883306.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:06.173Z,1478883306.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:06.590Z,1478883306.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:06.876Z,1478883306.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:06.966Z,1478883306.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:07.345Z,1478883307.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:07.672Z,1478883307.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:07.763Z,1478883307.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:08.080Z,1478883308.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:08.193Z,1478883308.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:08.545Z,1478883308.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:08.876Z,1478883308.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:08.991Z,1478883308.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:09.357Z,1478883309.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:09.596Z,1478883309.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:09.781Z,1478883309.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:10.182Z,1478883310.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:10.392Z,1478883310.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:10.556Z,1478883310.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:10.955Z,1478883310.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:11.189Z,1478883311.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:11.359Z,1478883311.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:11.596Z,1478883311.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:11.765Z,1478883311.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:12.162Z,1478883312.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:12.392Z,1478883312.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:12.550Z,1478883312.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:12.957Z,1478883312.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:13.188Z,1478883313.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:13.360Z,1478883313.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:13.596Z,1478883313.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:13.756Z,1478883313.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:14.156Z,1478883314.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:14.392Z,1478883314.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:14.557Z,1478883314.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:14.950Z,1478883314.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:15.189Z,1478883315.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:15.358Z,1478883315.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:15.600Z,1478883315.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:15.769Z,1478883315.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:16.161Z,1478883316.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:16.396Z,1478883316.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:16.554Z,1478883316.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:16.962Z,1478883316.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:17.192Z,1478883317.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:17.396Z,1478883317.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:17.736Z,1478883317.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:17.754Z,1478883317.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:18.149Z,1478883318.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:18.532Z,1478883318.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:18.562Z,1478883318.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:18.962Z,1478883318.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:19.328Z,1478883319.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:19.381Z,1478883319.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:19.760Z,1478883319.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:20.052Z,1478883320.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:20.157Z,1478883320.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:20.561Z,1478883320.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:20.848Z,1478883320.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:20.986Z,1478883320.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:21.373Z,1478883321.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:21.644Z,1478883321.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:21.769Z,1478883321.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:22.052Z,1478883322.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:22.181Z,1478883322.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:22.546Z,1478883322.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:22.848Z,1478883322.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:22.976Z,1478883322.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:23.357Z,1478883323.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:23.576Z,1478883323.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:23.777Z,1478883323.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:24.179Z,1478883324.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:24.372Z,1478883324.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:24.544Z,1478883324.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:24.947Z,1478883324.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:25.168Z,1478883325.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:25.357Z,1478883325.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:25.576Z,1478883325.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:25.750Z,1478883325.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:26.146Z,1478883326.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:26.372Z,1478883326.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:26.549Z,1478883326.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:26.959Z,1478883326.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:27.168Z,1478883327.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:27.363Z,1478883327.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:27.576Z,1478883327.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:27.762Z,1478883327.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:28.150Z,1478883328.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:28.372Z,1478883328.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:28.564Z,1478883328.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:28.957Z,1478883328.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:29.168Z,1478883329.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:29.359Z,1478883329.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:29.576Z,1478883329.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:29.750Z,1478883329.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:30.157Z,1478883330.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:30.372Z,1478883330.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:30.550Z,1478883330.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:30.959Z,1478883330.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:31.168Z,1478883331.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:31.360Z,1478883331.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:31.668Z,1478883331.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:31.762Z,1478883331.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:32.163Z,1478883332.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:32.464Z,1478883332.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:32.557Z,1478883332.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:32.957Z,1478883332.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:33.260Z,1478883333.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:33.350Z,1478883333.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:33.757Z,1478883333.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:34.028Z,1478883334.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:34.153Z,1478883334.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:34.555Z,1478883334.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:34.824Z,1478883334.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:34.965Z,1478883334.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:34.987Z,1478883334.987 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T16:50:34.6Z
2016-11-11T16:55:34.987Z,1478883334.987 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T16:55:34.987Z,1478883334.987 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T16:55:35.360Z,1478883335.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:35.620Z,1478883335.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:36.036Z,1478883336.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:36.334Z,1478883336.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:36.832Z,1478883336.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:37.568Z,1478883337.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:38.364Z,1478883338.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:39.162Z,1478883339.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:39.572Z,1478883339.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:39.690Z,1478883339.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:39.756Z,1478883339.756 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20161111T044527/Courier0280.lzma
2016-11-11T16:55:39.829Z,1478883339.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:40.203Z,1478883340.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:40.369Z,1478883340.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:40.549Z,1478883340.549 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0280.lzma.bak
2016-11-11T16:55:40.550Z,1478883340.550 [DataOverHttps](INFO): SBD MOMSN=4555586
2016-11-11T16:55:40.641Z,1478883340.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:41.164Z,1478883341.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:41.576Z,1478883341.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:41.956Z,1478883341.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:42.128Z,1478883342.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:42.373Z,1478883342.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:43.168Z,1478883343.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:43.580Z,1478883343.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:44.376Z,1478883344.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:45.178Z,1478883345.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:45.588Z,1478883345.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:45.672Z,1478883345.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:45.740Z,1478883345.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:46.084Z,1478883346.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:46.468Z,1478883346.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:46.474Z,1478883346.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:46.862Z,1478883346.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:47.264Z,1478883347.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:47.267Z,1478883347.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:47.996Z,1478883347.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:48.792Z,1478883348.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:49.588Z,1478883349.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:50.000Z,1478883350.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:50.796Z,1478883350.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:50.804Z,1478883350.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:50.868Z,1478883350.868 [DataOverHttps](INFO): Sending 398 bytes from file Logs/20161111T044527/Express0281.lzma
2016-11-11T16:55:50.945Z,1478883350.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:51.314Z,1478883351.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:51.520Z,1478883351.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:51.633Z,1478883351.633 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0281.lzma.bak
2016-11-11T16:55:51.634Z,1478883351.634 [DataOverHttps](INFO): SBD MOMSN=4555589
2016-11-11T16:55:51.712Z,1478883351.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:52.316Z,1478883352.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:52.945Z,1478883352.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:52.970Z,1478883352.970 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T16:55:52.970Z,1478883352.970 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T16:55:52.970Z,1478883352.970 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T16:55:53.101Z,1478883353.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:53.113Z,1478883353.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:53.560Z,1478883353.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:54.356Z,1478883354.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:55.152Z,1478883355.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:55.560Z,1478883355.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:56.356Z,1478883356.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:56.575Z,1478883356.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:56.712Z,1478883356.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:57.152Z,1478883357.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:57.161Z,1478883357.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:57.557Z,1478883357.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:57.576Z,1478883357.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:57.898Z,1478883357.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:58.306Z,1478883358.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:58.372Z,1478883358.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:58.681Z,1478883358.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:59.105Z,1478883359.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:59.169Z,1478883359.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:59.482Z,1478883359.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:55:59.628Z,1478883359.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:55:59.910Z,1478883359.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:00.277Z,1478883360.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:00.424Z,1478883360.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:00.677Z,1478883360.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:01.089Z,1478883361.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:01.220Z,1478883361.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:01.532Z,1478883361.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:01.893Z,1478883361.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:02.012Z,1478883362.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:02.291Z,1478883362.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:02.701Z,1478883362.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:02.808Z,1478883362.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:03.092Z,1478883363.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:03.527Z,1478883363.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:03.604Z,1478883363.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:03.884Z,1478883363.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:04.012Z,1478883364.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:04.279Z,1478883364.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:04.685Z,1478883364.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:04.808Z,1478883364.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:05.121Z,1478883365.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:05.488Z,1478883365.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:05.536Z,1478883365.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:05.887Z,1478883365.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:05.940Z,1478883365.940 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T16:56:06.277Z,1478883366.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:06.332Z,1478883366.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:06.684Z,1478883366.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:07.121Z,1478883367.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:07.128Z,1478883367.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:07.488Z,1478883367.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:07.888Z,1478883367.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:07.924Z,1478883367.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:08.281Z,1478883368.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:08.680Z,1478883368.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:08.720Z,1478883368.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:09.091Z,1478883369.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:09.503Z,1478883369.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:09.516Z,1478883369.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:09.885Z,1478883369.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:10.281Z,1478883370.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:10.312Z,1478883370.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:10.698Z,1478883370.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:11.088Z,1478883371.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:11.108Z,1478883371.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:11.502Z,1478883371.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:11.904Z,1478883371.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:11.945Z,1478883371.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:12.289Z,1478883372.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:12.700Z,1478883372.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:12.728Z,1478883372.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:13.093Z,1478883373.093 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:13.093Z,1478883373.093 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 222
2016-11-11T16:56:13.093Z,1478883373.093 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:56:13.100Z,1478883373.100 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:13.100Z,1478883373.100 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 222
2016-11-11T16:56:13.100Z,1478883373.100 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:56:13.102Z,1478883373.102 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:13.102Z,1478883373.102 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 222
2016-11-11T16:56:13.102Z,1478883373.102 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:56:13.154Z,1478883373.154 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:56:13.154Z,1478883373.154 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:56:13.155Z,1478883373.155 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:56:13.496Z,1478883373.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:13.539Z,1478883373.539 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:56:13.539Z,1478883373.539 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 222
2016-11-11T16:56:13.540Z,1478883373.540 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:56:13.540Z,1478883373.540 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 222
2016-11-11T16:56:13.541Z,1478883373.541 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:56:13.541Z,1478883373.541 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 222
2016-11-11T16:56:13.949Z,1478883373.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:56:13.950Z,1478883373.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:56:13.950Z,1478883373.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:56:13.959Z,1478883373.959 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:56:13.964Z,1478883373.964 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:56:13.967Z,1478883373.967 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:56:13.968Z,1478883373.968 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:56:13.968Z,1478883373.968 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:56:13.969Z,1478883373.969 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:56:14.277Z,1478883374.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:14.292Z,1478883374.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:14.675Z,1478883374.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:15.085Z,1478883375.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:15.088Z,1478883375.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:15.487Z,1478883375.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:15.879Z,1478883375.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:15.884Z,1478883375.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:16.280Z,1478883376.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:16.680Z,1478883376.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:16.682Z,1478883376.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:17.094Z,1478883377.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:17.476Z,1478883377.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:17.497Z,1478883377.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:17.897Z,1478883377.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:18.272Z,1478883378.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:18.305Z,1478883378.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:18.669Z,1478883378.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:19.068Z,1478883379.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:19.099Z,1478883379.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:19.473Z,1478883379.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:19.864Z,1478883379.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:19.870Z,1478883379.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:20.273Z,1478883380.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:20.660Z,1478883380.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:20.677Z,1478883380.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:21.086Z,1478883381.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:21.456Z,1478883381.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:21.478Z,1478883381.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:21.919Z,1478883381.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:22.258Z,1478883382.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:22.301Z,1478883382.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:22.668Z,1478883382.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:22.695Z,1478883382.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:23.077Z,1478883383.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:23.106Z,1478883383.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:23.484Z,1478883383.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:23.497Z,1478883383.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:23.892Z,1478883383.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:23.900Z,1478883383.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:24.289Z,1478883384.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:24.300Z,1478883384.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:24.692Z,1478883384.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:24.708Z,1478883384.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:25.096Z,1478883385.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:25.116Z,1478883385.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:25.478Z,1478883385.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:25.524Z,1478883385.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:25.878Z,1478883385.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:25.932Z,1478883385.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:26.340Z,1478883386.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:26.342Z,1478883386.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:26.673Z,1478883386.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:27.137Z,1478883387.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:27.159Z,1478883387.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:27.497Z,1478883387.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:27.608Z,1478883387.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:27.925Z,1478883387.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:28.330Z,1478883388.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:28.404Z,1478883388.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:28.688Z,1478883388.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:29.084Z,1478883389.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:29.200Z,1478883389.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:29.532Z,1478883389.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:29.873Z,1478883389.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:29.968Z,1478883389.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:30.281Z,1478883390.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:30.677Z,1478883390.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:30.764Z,1478883390.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:31.076Z,1478883391.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:31.544Z,1478883391.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:31.560Z,1478883391.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:31.878Z,1478883391.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:31.968Z,1478883391.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:32.287Z,1478883392.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:32.690Z,1478883392.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:32.764Z,1478883392.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:33.138Z,1478883393.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:33.497Z,1478883393.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:33.524Z,1478883393.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:33.896Z,1478883393.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:34.285Z,1478883394.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:34.320Z,1478883394.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:34.689Z,1478883394.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:35.098Z,1478883395.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:35.116Z,1478883395.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:35.481Z,1478883395.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:35.524Z,1478883395.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:35.889Z,1478883395.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:36.277Z,1478883396.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:36.320Z,1478883396.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:36.689Z,1478883396.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:37.099Z,1478883397.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:37.116Z,1478883397.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:37.494Z,1478883397.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:37.524Z,1478883397.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:37.897Z,1478883397.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:38.293Z,1478883398.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:38.320Z,1478883398.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:38.689Z,1478883398.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:39.104Z,1478883399.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:39.116Z,1478883399.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:39.483Z,1478883399.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:39.524Z,1478883399.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:39.881Z,1478883399.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:40.317Z,1478883400.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:40.320Z,1478883400.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:40.694Z,1478883400.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:41.117Z,1478883401.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:41.144Z,1478883401.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:41.489Z,1478883401.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:41.576Z,1478883401.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:41.889Z,1478883401.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:42.301Z,1478883402.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:42.372Z,1478883402.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:42.696Z,1478883402.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:43.130Z,1478883403.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:43.168Z,1478883403.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:43.589Z,1478883403.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:43.897Z,1478883403.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:43.917Z,1478883403.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:44.273Z,1478883404.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:44.673Z,1478883404.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:44.712Z,1478883404.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:45.077Z,1478883405.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:45.508Z,1478883405.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:45.521Z,1478883405.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:45.885Z,1478883405.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:45.000Z,1478883406.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:46.292Z,1478883406.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:46.692Z,1478883406.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:46.796Z,1478883406.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:47.101Z,1478883407.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:47.428Z,1478883407.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:47.491Z,1478883407.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:47.891Z,1478883407.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:48.224Z,1478883408.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:48.293Z,1478883408.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:48.693Z,1478883408.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:49.020Z,1478883409.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:49.086Z,1478883409.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:49.428Z,1478883409.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:49.489Z,1478883409.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:49.881Z,1478883409.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:50.224Z,1478883410.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:50.278Z,1478883410.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:50.677Z,1478883410.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:51.020Z,1478883411.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:51.085Z,1478883411.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:51.428Z,1478883411.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:51.485Z,1478883411.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:51.885Z,1478883411.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:52.224Z,1478883412.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:52.287Z,1478883412.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:52.688Z,1478883412.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:53.020Z,1478883413.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:53.093Z,1478883413.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:53.428Z,1478883413.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:53.489Z,1478883413.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:54.224Z,1478883414.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:55.020Z,1478883415.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:55.536Z,1478883415.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:56.332Z,1478883416.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:57.128Z,1478883417.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:57.163Z,1478883417.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:57.294Z,1478883417.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:57.666Z,1478883417.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:57.876Z,1478883417.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:58.109Z,1478883418.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:58.451Z,1478883418.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:58.672Z,1478883418.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:58.901Z,1478883418.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:59.306Z,1478883419.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:59.469Z,1478883419.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:56:59.708Z,1478883419.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:56:59.880Z,1478883419.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:00.057Z,1478883420.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:00.467Z,1478883420.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:00.676Z,1478883420.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:00.860Z,1478883420.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:01.255Z,1478883421.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:01.408Z,1478883421.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:01.654Z,1478883421.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:02.065Z,1478883422.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:02.204Z,1478883422.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:02.451Z,1478883422.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:02.860Z,1478883422.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:03.000Z,1478883423.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:03.257Z,1478883423.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:03.408Z,1478883423.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:03.673Z,1478883423.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:04.067Z,1478883424.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:04.204Z,1478883424.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:04.477Z,1478883424.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:04.874Z,1478883424.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:05.008Z,1478883425.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:05.273Z,1478883425.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:05.436Z,1478883425.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:05.675Z,1478883425.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:06.081Z,1478883426.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:06.232Z,1478883426.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:06.470Z,1478883426.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:06.870Z,1478883426.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:07.028Z,1478883427.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:07.266Z,1478883427.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:07.437Z,1478883427.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:07.697Z,1478883427.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:08.070Z,1478883428.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:08.232Z,1478883428.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:08.462Z,1478883428.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:08.877Z,1478883428.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:09.029Z,1478883429.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:09.283Z,1478883429.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:09.524Z,1478883429.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:09.697Z,1478883429.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:10.081Z,1478883430.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:10.320Z,1478883430.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:10.470Z,1478883430.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:10.907Z,1478883430.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:11.116Z,1478883431.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:11.430Z,1478883431.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:11.721Z,1478883431.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:11.876Z,1478883431.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:12.066Z,1478883432.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:12.465Z,1478883432.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:12.672Z,1478883432.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:12.877Z,1478883432.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:13.305Z,1478883433.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:13.468Z,1478883433.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:13.673Z,1478883433.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:13.876Z,1478883433.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:14.108Z,1478883434.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:14.465Z,1478883434.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:14.672Z,1478883434.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:14.871Z,1478883434.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:15.249Z,1478883435.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:15.436Z,1478883435.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:15.653Z,1478883435.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:16.081Z,1478883436.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:16.232Z,1478883436.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:16.465Z,1478883436.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:16.887Z,1478883436.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:17.028Z,1478883437.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:17.249Z,1478883437.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:17.436Z,1478883437.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:17.677Z,1478883437.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:18.055Z,1478883438.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:18.232Z,1478883438.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:18.495Z,1478883438.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:18.868Z,1478883438.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:19.028Z,1478883439.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:19.278Z,1478883439.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:19.436Z,1478883439.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:19.653Z,1478883439.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:20.071Z,1478883440.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:20.232Z,1478883440.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:20.458Z,1478883440.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:20.865Z,1478883440.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:21.028Z,1478883441.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:21.259Z,1478883441.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:21.440Z,1478883441.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:21.671Z,1478883441.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:22.050Z,1478883442.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:22.236Z,1478883442.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:22.454Z,1478883442.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:22.851Z,1478883442.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:23.034Z,1478883443.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:23.257Z,1478883443.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:23.496Z,1478883443.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:23.662Z,1478883443.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:24.083Z,1478883444.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:24.292Z,1478883444.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:24.485Z,1478883444.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:24.874Z,1478883444.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:25.088Z,1478883445.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:25.260Z,1478883445.260 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T16:57:25.260Z,1478883445.260 [BPC1] Data Fault, FailCount= 1
2016-11-11T16:57:25.260Z,1478883445.260 [BPC1](ERROR): Data Fault
2016-11-11T16:57:25.273Z,1478883445.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:25.353Z,1478883445.353 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T16:57:25.678Z,1478883445.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:25.864Z,1478883445.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:26.051Z,1478883446.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:26.462Z,1478883446.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:26.539Z,1478883446.539 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:57:26.540Z,1478883446.540 [BPC1] No Fault, FailCount= 1
2016-11-11T16:57:26.660Z,1478883446.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:26.941Z,1478883446.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:27.274Z,1478883447.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:27.456Z,1478883447.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:27.670Z,1478883447.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:27.868Z,1478883447.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:28.095Z,1478883448.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:28.460Z,1478883448.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:28.664Z,1478883448.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:28.866Z,1478883448.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:29.277Z,1478883449.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:29.404Z,1478883449.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:29.688Z,1478883449.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:30.090Z,1478883450.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:30.200Z,1478883450.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:30.465Z,1478883450.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:30.855Z,1478883450.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:30.996Z,1478883450.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:31.253Z,1478883451.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:31.640Z,1478883451.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:31.792Z,1478883451.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:32.049Z,1478883452.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:32.481Z,1478883452.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:32.588Z,1478883452.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:32.845Z,1478883452.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:33.249Z,1478883453.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:33.384Z,1478883453.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:33.659Z,1478883453.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:34.058Z,1478883454.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:34.180Z,1478883454.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:34.449Z,1478883454.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:34.849Z,1478883454.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:34.976Z,1478883454.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:35.241Z,1478883455.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:35.649Z,1478883455.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:35.772Z,1478883455.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:36.042Z,1478883456.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:36.444Z,1478883456.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:36.568Z,1478883456.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:36.841Z,1478883456.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:37.261Z,1478883457.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:37.364Z,1478883457.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:37.659Z,1478883457.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:38.041Z,1478883458.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:38.160Z,1478883458.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:38.449Z,1478883458.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:38.849Z,1478883458.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:38.956Z,1478883458.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:39.276Z,1478883459.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:39.668Z,1478883459.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:39.752Z,1478883459.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:40.045Z,1478883460.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:40.474Z,1478883460.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:40.548Z,1478883460.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:40.850Z,1478883460.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:41.273Z,1478883461.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:41.344Z,1478883461.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:41.677Z,1478883461.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:42.050Z,1478883462.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:42.140Z,1478883462.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:42.445Z,1478883462.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:42.900Z,1478883462.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:42.936Z,1478883462.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:43.244Z,1478883463.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:43.644Z,1478883463.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:43.732Z,1478883463.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:44.045Z,1478883464.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:44.445Z,1478883464.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:44.528Z,1478883464.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:44.845Z,1478883464.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:45.249Z,1478883465.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:45.324Z,1478883465.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:45.645Z,1478883465.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:46.063Z,1478883466.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:46.120Z,1478883466.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:46.457Z,1478883466.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:46.844Z,1478883466.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:46.916Z,1478883466.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:47.245Z,1478883467.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:47.648Z,1478883467.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:47.712Z,1478883467.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:48.044Z,1478883468.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:48.444Z,1478883468.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:48.508Z,1478883468.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:48.845Z,1478883468.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:49.249Z,1478883469.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:49.304Z,1478883469.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:49.645Z,1478883469.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:50.045Z,1478883470.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:50.100Z,1478883470.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:50.463Z,1478883470.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:50.865Z,1478883470.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:50.896Z,1478883470.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:51.261Z,1478883471.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:51.647Z,1478883471.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:51.692Z,1478883471.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:52.046Z,1478883472.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:52.449Z,1478883472.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:52.488Z,1478883472.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:52.849Z,1478883472.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:53.244Z,1478883473.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:53.284Z,1478883473.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:53.648Z,1478883473.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:54.080Z,1478883474.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:54.876Z,1478883474.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:55.672Z,1478883475.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:56.468Z,1478883476.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:56.876Z,1478883476.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:57.288Z,1478883477.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:57.696Z,1478883477.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:58.104Z,1478883478.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:58.512Z,1478883478.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:58.920Z,1478883478.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:59.328Z,1478883479.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:59.642Z,1478883479.642 [BPC1](ERROR): Failed to receive battery data
2016-11-11T16:57:59.643Z,1478883479.643 [BPC1] Communications Fault, FailCount= 1
2016-11-11T16:57:59.643Z,1478883479.643 [BPC1](ERROR): Communications Fault
2016-11-11T16:57:59.677Z,1478883479.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:57:59.713Z,1478883479.713 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T16:57:59.736Z,1478883479.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:57:59.870Z,1478883479.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:00.144Z,1478883480.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:00.236Z,1478883480.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:00.553Z,1478883480.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:00.616Z,1478883480.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:00.670Z,1478883480.670 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:58:00.670Z,1478883480.671 [BPC1] No Fault, FailCount= 1
2016-11-11T16:58:00.960Z,1478883480.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:01.069Z,1478883481.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:01.368Z,1478883481.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:01.401Z,1478883481.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:01.776Z,1478883481.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:01.784Z,1478883481.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:02.184Z,1478883482.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:02.196Z,1478883482.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:02.577Z,1478883482.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:02.592Z,1478883482.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:02.985Z,1478883482.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:02.000Z,1478883483.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:03.385Z,1478883483.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:03.408Z,1478883483.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:03.785Z,1478883483.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:04.199Z,1478883484.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:04.204Z,1478883484.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:04.541Z,1478883484.541 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T16:58:04.577Z,1478883484.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:05.001Z,1478883485.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:05.035Z,1478883485.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:05.372Z,1478883485.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:05.448Z,1478883485.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:05.777Z,1478883485.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:06.179Z,1478883486.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:06.244Z,1478883486.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:06.585Z,1478883486.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:06.979Z,1478883486.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:07.040Z,1478883487.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:07.389Z,1478883487.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:07.779Z,1478883487.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:07.836Z,1478883487.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:08.182Z,1478883488.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:08.244Z,1478883488.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:08.585Z,1478883488.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:08.988Z,1478883488.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:09.040Z,1478883489.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:09.387Z,1478883489.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:09.789Z,1478883489.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:09.812Z,1478883489.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:10.148Z,1478883490.148 [NAL9602](INFO): Powering down
2016-11-11T16:58:10.207Z,1478883490.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:10.584Z,1478883490.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:10.608Z,1478883490.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:10.985Z,1478883490.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:11.296Z,1478883491.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:11.397Z,1478883491.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:11.776Z,1478883491.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:12.092Z,1478883492.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:12.188Z,1478883492.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:12.589Z,1478883492.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:12.888Z,1478883492.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:13.021Z,1478883493.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:13.296Z,1478883493.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:13.421Z,1478883493.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:13.785Z,1478883493.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:14.093Z,1478883494.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:14.213Z,1478883494.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:14.585Z,1478883494.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:14.888Z,1478883494.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:15.015Z,1478883495.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:15.296Z,1478883495.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:15.414Z,1478883495.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:15.785Z,1478883495.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:16.092Z,1478883496.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:16.185Z,1478883496.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:16.592Z,1478883496.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:16.888Z,1478883496.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:17.005Z,1478883497.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:17.308Z,1478883497.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:17.401Z,1478883497.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:17.778Z,1478883497.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:18.104Z,1478883498.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:18.177Z,1478883498.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:18.576Z,1478883498.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:18.900Z,1478883498.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:19.016Z,1478883499.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:19.389Z,1478883499.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:19.444Z,1478883499.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:19.789Z,1478883499.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:20.182Z,1478883500.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:20.240Z,1478883500.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:20.589Z,1478883500.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:20.989Z,1478883500.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:21.036Z,1478883501.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:21.399Z,1478883501.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:21.788Z,1478883501.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:21.789Z,1478883501.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:22.182Z,1478883502.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:22.584Z,1478883502.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:22.586Z,1478883502.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:22.989Z,1478883502.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:23.380Z,1478883503.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:23.400Z,1478883503.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:23.785Z,1478883503.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:23.788Z,1478883503.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:58:24.192Z,1478883504.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:24.589Z,1478883504.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:24.988Z,1478883504.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:25.397Z,1478883505.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:25.773Z,1478883505.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:26.172Z,1478883506.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:26.580Z,1478883506.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:26.985Z,1478883506.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:27.433Z,1478883507.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:27.779Z,1478883507.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:28.185Z,1478883508.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:28.618Z,1478883508.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:28.978Z,1478883508.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:29.419Z,1478883509.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:29.818Z,1478883509.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:30.178Z,1478883510.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:30.590Z,1478883510.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:30.984Z,1478883510.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:31.382Z,1478883511.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:31.785Z,1478883511.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:32.181Z,1478883512.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:32.589Z,1478883512.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:33.028Z,1478883513.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:33.389Z,1478883513.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:33.785Z,1478883513.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:34.190Z,1478883514.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:34.584Z,1478883514.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:34.988Z,1478883514.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:35.381Z,1478883515.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:35.781Z,1478883515.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:36.193Z,1478883516.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:36.590Z,1478883516.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:36.981Z,1478883516.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:37.388Z,1478883517.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:37.782Z,1478883517.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:38.180Z,1478883518.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:38.591Z,1478883518.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:38.989Z,1478883518.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:39.382Z,1478883519.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:39.789Z,1478883519.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:40.190Z,1478883520.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:40.583Z,1478883520.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:40.980Z,1478883520.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:41.381Z,1478883521.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:41.809Z,1478883521.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:42.185Z,1478883522.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:42.590Z,1478883522.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:42.985Z,1478883522.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:43.389Z,1478883523.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:43.790Z,1478883523.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:44.182Z,1478883524.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:44.589Z,1478883524.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:44.975Z,1478883524.975 [BPC1](ERROR): Failed to receive battery data
2016-11-11T16:58:44.975Z,1478883524.975 [BPC1] Communications Fault, FailCount= 1
2016-11-11T16:58:44.975Z,1478883524.975 [BPC1](ERROR): Communications Fault
2016-11-11T16:58:44.983Z,1478883524.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:45.004Z,1478883525.004 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T16:58:45.389Z,1478883525.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:45.791Z,1478883525.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:46.192Z,1478883526.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:46.211Z,1478883526.211 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T16:58:46.211Z,1478883526.211 [BPC1] No Fault, FailCount= 1
2016-11-11T16:58:46.637Z,1478883526.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:47.041Z,1478883527.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:47.394Z,1478883527.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:47.792Z,1478883527.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:48.190Z,1478883528.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:48.600Z,1478883528.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:48.973Z,1478883528.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:49.393Z,1478883529.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:49.793Z,1478883529.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:50.189Z,1478883530.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:50.585Z,1478883530.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:51.000Z,1478883531.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:51.391Z,1478883531.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:51.792Z,1478883531.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:52.221Z,1478883532.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:52.585Z,1478883532.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:52.979Z,1478883532.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:53.421Z,1478883533.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:53.785Z,1478883533.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:57.295Z,1478883537.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:57.429Z,1478883537.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:57.829Z,1478883537.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:58.197Z,1478883538.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:58.595Z,1478883538.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:58.995Z,1478883538.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:59.394Z,1478883539.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:58:59.799Z,1478883539.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:00.201Z,1478883540.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:00.601Z,1478883540.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:01.001Z,1478883541.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:01.400Z,1478883541.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:01.801Z,1478883541.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:02.108Z,1478883542.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:02.209Z,1478883542.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:02.599Z,1478883542.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:02.904Z,1478883542.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:03.001Z,1478883543.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:03.397Z,1478883543.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:03.801Z,1478883543.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:04.205Z,1478883544.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:04.601Z,1478883544.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:04.998Z,1478883544.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:05.399Z,1478883545.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:05.815Z,1478883545.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:06.213Z,1478883546.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:06.602Z,1478883546.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:07.002Z,1478883547.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:07.401Z,1478883547.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:07.805Z,1478883547.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:08.198Z,1478883548.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:08.605Z,1478883548.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:09.053Z,1478883549.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:09.408Z,1478883549.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:09.841Z,1478883549.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:10.201Z,1478883550.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:10.634Z,1478883550.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:11.002Z,1478883551.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:11.437Z,1478883551.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:11.841Z,1478883551.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:11.996Z,1478883551.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:12.196Z,1478883552.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:12.601Z,1478883552.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:12.792Z,1478883552.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:13.004Z,1478883553.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:13.200Z,1478883553.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:13.401Z,1478883553.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:13.799Z,1478883553.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:13.996Z,1478883553.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:14.198Z,1478883554.198 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:14.198Z,1478883554.198 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 223
2016-11-11T16:59:14.198Z,1478883554.198 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T16:59:14.205Z,1478883554.205 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:14.205Z,1478883554.205 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 223
2016-11-11T16:59:14.205Z,1478883554.205 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T16:59:14.207Z,1478883554.207 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:14.207Z,1478883554.207 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 223
2016-11-11T16:59:14.207Z,1478883554.207 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T16:59:14.222Z,1478883554.222 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T16:59:14.222Z,1478883554.222 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T16:59:14.222Z,1478883554.222 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T16:59:14.629Z,1478883554.629 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T16:59:14.629Z,1478883554.629 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 223
2016-11-11T16:59:14.629Z,1478883554.629 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T16:59:14.629Z,1478883554.629 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 223
2016-11-11T16:59:14.630Z,1478883554.630 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T16:59:14.630Z,1478883554.630 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 223
2016-11-11T16:59:14.792Z,1478883554.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:15.011Z,1478883555.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T16:59:15.012Z,1478883555.012 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:59:15.012Z,1478883555.012 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:59:15.017Z,1478883555.017 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T16:59:15.017Z,1478883555.017 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:59:15.018Z,1478883555.018 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:59:15.018Z,1478883555.018 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T16:59:15.019Z,1478883555.019 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T16:59:15.019Z,1478883555.019 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T16:59:15.294Z,1478883555.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:15.413Z,1478883555.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:15.793Z,1478883555.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:16.088Z,1478883556.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:16.193Z,1478883556.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:16.593Z,1478883556.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:16.884Z,1478883556.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:16.993Z,1478883556.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:17.393Z,1478883557.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:17.648Z,1478883557.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:17.800Z,1478883557.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:18.211Z,1478883558.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:18.444Z,1478883558.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:18.601Z,1478883558.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:18.999Z,1478883558.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:19.241Z,1478883559.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:19.404Z,1478883559.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:19.652Z,1478883559.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:19.799Z,1478883559.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:20.201Z,1478883560.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:20.448Z,1478883560.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:20.596Z,1478883560.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:21.008Z,1478883561.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:21.184Z,1478883561.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:21.396Z,1478883561.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:21.803Z,1478883561.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:21.982Z,1478883561.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:22.221Z,1478883562.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:22.604Z,1478883562.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:22.776Z,1478883562.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:23.007Z,1478883563.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:23.184Z,1478883563.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:23.404Z,1478883563.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:23.829Z,1478883563.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:23.980Z,1478883563.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:24.208Z,1478883564.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:24.621Z,1478883564.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:24.777Z,1478883564.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:25.009Z,1478883565.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:25.184Z,1478883565.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:25.425Z,1478883565.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:25.833Z,1478883565.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:25.980Z,1478883565.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:26.196Z,1478883566.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:26.609Z,1478883566.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:26.777Z,1478883566.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:27.009Z,1478883567.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:27.188Z,1478883567.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:27.398Z,1478883567.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:27.809Z,1478883567.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:27.984Z,1478883567.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:28.206Z,1478883568.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:28.598Z,1478883568.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:28.782Z,1478883568.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:29.006Z,1478883569.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:29.272Z,1478883569.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:29.397Z,1478883569.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:29.798Z,1478883569.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:30.068Z,1478883570.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:30.209Z,1478883570.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:30.604Z,1478883570.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:30.864Z,1478883570.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:31.005Z,1478883571.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:31.413Z,1478883571.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:31.632Z,1478883571.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:31.808Z,1478883571.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:32.204Z,1478883572.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:32.428Z,1478883572.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:32.609Z,1478883572.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:32.994Z,1478883572.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:33.224Z,1478883573.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:33.393Z,1478883573.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:33.632Z,1478883573.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:33.794Z,1478883573.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:34.195Z,1478883574.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:34.428Z,1478883574.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:34.601Z,1478883574.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:34.997Z,1478883574.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:35.156Z,1478883575.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:35.395Z,1478883575.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:35.795Z,1478883575.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:35.952Z,1478883575.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:36.204Z,1478883576.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:36.628Z,1478883576.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:36.749Z,1478883576.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:37.005Z,1478883577.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:37.160Z,1478883577.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:37.429Z,1478883577.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:37.808Z,1478883577.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:37.956Z,1478883577.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:38.208Z,1478883578.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:38.625Z,1478883578.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:38.752Z,1478883578.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:38.994Z,1478883578.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:39.160Z,1478883579.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:39.430Z,1478883579.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:39.823Z,1478883579.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:39.956Z,1478883579.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:40.195Z,1478883580.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:40.600Z,1478883580.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:40.752Z,1478883580.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:41.081Z,1478883581.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:41.160Z,1478883581.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:41.401Z,1478883581.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:41.801Z,1478883581.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:41.956Z,1478883581.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:42.207Z,1478883582.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:42.607Z,1478883582.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:42.752Z,1478883582.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:42.998Z,1478883582.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:43.252Z,1478883583.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:43.404Z,1478883583.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:43.805Z,1478883583.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:44.048Z,1478883584.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:44.201Z,1478883584.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:44.606Z,1478883584.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:44.844Z,1478883584.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:45.004Z,1478883585.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:45.397Z,1478883585.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:45.612Z,1478883585.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:45.805Z,1478883585.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:46.205Z,1478883586.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:46.408Z,1478883586.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:46.605Z,1478883586.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:47.007Z,1478883587.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:47.206Z,1478883587.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:47.408Z,1478883587.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:47.616Z,1478883587.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:47.808Z,1478883587.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:48.207Z,1478883588.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:48.412Z,1478883588.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:48.608Z,1478883588.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:48.993Z,1478883588.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:49.144Z,1478883589.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:49.393Z,1478883589.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:49.795Z,1478883589.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:49.940Z,1478883589.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:50.233Z,1478883590.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:50.604Z,1478883590.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:50.736Z,1478883590.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:51.006Z,1478883591.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:51.144Z,1478883591.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:51.404Z,1478883591.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:51.832Z,1478883591.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:51.940Z,1478883591.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:52.208Z,1478883592.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:52.625Z,1478883592.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:52.736Z,1478883592.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:53.015Z,1478883593.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:53.152Z,1478883593.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:53.422Z,1478883593.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:53.812Z,1478883593.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:53.948Z,1478883593.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:54.745Z,1478883594.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:55.156Z,1478883595.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:55.952Z,1478883595.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:56.748Z,1478883596.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:57.256Z,1478883597.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:57.324Z,1478883597.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:57.378Z,1478883597.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:57.480Z,1478883597.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:57.495Z,1478883597.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:57.849Z,1478883597.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:57.881Z,1478883597.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:58.054Z,1478883598.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:58.250Z,1478883598.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:58.287Z,1478883598.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:58.655Z,1478883598.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:58.681Z,1478883598.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:58.848Z,1478883598.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:59.049Z,1478883599.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:59.085Z,1478883599.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:59.449Z,1478883599.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:59.470Z,1478883599.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T16:59:59.600Z,1478883599.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:59.855Z,1478883599.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T16:59:59.871Z,1478883599.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:00.255Z,1478883600.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:00.277Z,1478883600.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:00.396Z,1478883600.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:00.693Z,1478883600.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:01.072Z,1478883601.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:01.192Z,1478883601.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:01.479Z,1478883601.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:01.606Z,1478883601.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:01.884Z,1478883601.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:02.278Z,1478883602.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:02.400Z,1478883602.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:02.736Z,1478883602.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:03.066Z,1478883603.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:03.132Z,1478883603.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:03.493Z,1478883603.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:03.892Z,1478883603.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:03.928Z,1478883603.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:04.270Z,1478883604.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:04.724Z,1478883604.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:04.725Z,1478883604.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:05.076Z,1478883605.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:05.176Z,1478883605.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:05.489Z,1478883605.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:05.864Z,1478883605.864 [PNI_TCM](ERROR): CRC does not match. Expected:0x17375 got:0x28835
2016-11-11T17:00:05.889Z,1478883605.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:05.972Z,1478883605.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:06.274Z,1478883606.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:06.761Z,1478883606.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:06.768Z,1478883606.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:07.093Z,1478883607.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:07.176Z,1478883607.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:07.463Z,1478883607.463 [PNI_TCM](ERROR): CRC does not match. Expected:0x843 got:0x15852
2016-11-11T17:00:07.497Z,1478883607.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:07.869Z,1478883607.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:07.973Z,1478883607.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:08.265Z,1478883608.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:08.762Z,1478883608.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:08.768Z,1478883608.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:09.077Z,1478883609.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:09.176Z,1478883609.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:09.506Z,1478883609.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:09.881Z,1478883609.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:09.972Z,1478883609.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:10.315Z,1478883610.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:10.674Z,1478883610.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:10.769Z,1478883610.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:11.105Z,1478883611.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:11.224Z,1478883611.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:11.506Z,1478883611.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:11.891Z,1478883611.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:12.022Z,1478883612.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:12.257Z,1478883612.257 [PNI_TCM](ERROR): CRC does not match. Expected:0x16238 got:0x16913
2016-11-11T17:00:12.296Z,1478883612.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:12.666Z,1478883612.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:12.816Z,1478883612.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:13.068Z,1478883613.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:13.483Z,1478883613.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:13.592Z,1478883613.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:13.885Z,1478883613.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:14.273Z,1478883614.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:14.388Z,1478883614.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:14.681Z,1478883614.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:15.082Z,1478883615.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:15.184Z,1478883615.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:15.466Z,1478883615.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:15.606Z,1478883615.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:15.867Z,1478883615.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:16.272Z,1478883616.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:16.400Z,1478883616.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:16.706Z,1478883616.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:17.080Z,1478883617.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:17.168Z,1478883617.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:17.472Z,1478883617.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:17.871Z,1478883617.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:17.964Z,1478883617.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:18.285Z,1478883618.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:18.724Z,1478883618.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:18.760Z,1478883618.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:19.079Z,1478883619.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:19.168Z,1478883619.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:19.481Z,1478883619.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:19.878Z,1478883619.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:19.964Z,1478883619.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:20.275Z,1478883620.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:20.723Z,1478883620.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:20.760Z,1478883620.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:21.077Z,1478883621.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:21.168Z,1478883621.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:21.478Z,1478883621.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:21.887Z,1478883621.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:21.964Z,1478883621.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:22.289Z,1478883622.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:22.709Z,1478883622.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:22.760Z,1478883622.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:23.133Z,1478883623.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:23.168Z,1478883623.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:23.484Z,1478883623.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:23.905Z,1478883623.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:23.964Z,1478883623.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:24.280Z,1478883624.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:24.705Z,1478883624.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:24.761Z,1478883624.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:25.097Z,1478883625.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:25.212Z,1478883625.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:25.483Z,1478883625.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:25.885Z,1478883625.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:26.008Z,1478883626.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:26.283Z,1478883626.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:26.683Z,1478883626.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:26.808Z,1478883626.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:27.122Z,1478883627.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:27.468Z,1478883627.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:27.572Z,1478883627.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:27.867Z,1478883627.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:28.273Z,1478883628.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:28.368Z,1478883628.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:28.670Z,1478883628.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:29.131Z,1478883629.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:29.164Z,1478883629.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:29.481Z,1478883629.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:29.588Z,1478883629.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:29.872Z,1478883629.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:30.281Z,1478883630.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:30.384Z,1478883630.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:30.669Z,1478883630.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:30.702Z,1478883630.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:31.049Z,1478883631.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:31.073Z,1478883631.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:31.128Z,1478883631.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:31.456Z,1478883631.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:31.477Z,1478883631.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:31.856Z,1478883631.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:31.877Z,1478883631.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:31.924Z,1478883631.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:32.261Z,1478883632.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:32.276Z,1478883632.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:32.674Z,1478883632.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:32.697Z,1478883632.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:32.720Z,1478883632.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:33.049Z,1478883633.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:33.090Z,1478883633.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:33.136Z,1478883633.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:33.449Z,1478883633.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:33.469Z,1478883633.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:33.852Z,1478883633.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:33.873Z,1478883633.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:33.932Z,1478883633.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:34.249Z,1478883634.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:34.264Z,1478883634.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:34.661Z,1478883634.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:34.701Z,1478883634.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:34.728Z,1478883634.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:35.059Z,1478883635.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:35.081Z,1478883635.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:35.136Z,1478883635.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:35.460Z,1478883635.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:35.475Z,1478883635.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:35.857Z,1478883635.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:35.897Z,1478883635.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:35.933Z,1478883635.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:36.249Z,1478883636.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:36.289Z,1478883636.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:36.701Z,1478883636.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:36.728Z,1478883636.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:37.101Z,1478883637.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:37.144Z,1478883637.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:37.485Z,1478883637.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:37.898Z,1478883637.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:37.940Z,1478883637.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:38.293Z,1478883638.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:38.737Z,1478883638.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:38.764Z,1478883638.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:39.105Z,1478883639.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:39.180Z,1478883639.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:39.470Z,1478883639.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:39.877Z,1478883639.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:39.976Z,1478883639.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:40.271Z,1478883640.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:40.671Z,1478883640.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:40.773Z,1478883640.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:41.119Z,1478883641.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:41.491Z,1478883641.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:41.556Z,1478883641.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:41.864Z,1478883641.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:42.269Z,1478883642.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:42.352Z,1478883642.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:42.669Z,1478883642.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:43.131Z,1478883643.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:43.148Z,1478883643.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:43.470Z,1478883643.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:43.556Z,1478883643.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:43.870Z,1478883643.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:44.270Z,1478883644.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:44.352Z,1478883644.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:44.714Z,1478883644.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:45.077Z,1478883645.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:45.088Z,1478883645.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:45.474Z,1478883645.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:45.880Z,1478883645.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:45.884Z,1478883645.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:46.272Z,1478883646.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:46.680Z,1478883646.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:46.697Z,1478883646.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:47.081Z,1478883647.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:47.088Z,1478883647.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:47.483Z,1478883647.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:47.880Z,1478883647.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:47.884Z,1478883647.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:48.281Z,1478883648.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:48.680Z,1478883648.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:48.683Z,1478883648.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:49.080Z,1478883649.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:49.092Z,1478883649.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:49.543Z,1478883649.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:49.869Z,1478883649.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:49.888Z,1478883649.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:50.264Z,1478883650.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:50.684Z,1478883650.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:50.705Z,1478883650.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:51.092Z,1478883651.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:51.106Z,1478883651.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:51.475Z,1478883651.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:51.873Z,1478883651.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:51.888Z,1478883651.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:52.308Z,1478883652.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:52.685Z,1478883652.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:52.714Z,1478883652.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:53.113Z,1478883653.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:53.180Z,1478883653.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:53.498Z,1478883653.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:53.519Z,1478883653.519 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T17:00:53.520Z,1478883653.520 [Default:CheckIn:C.Wait] Stopped
2016-11-11T17:00:53.520Z,1478883653.520 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T17:00:53.520Z,1478883653.520 [Default:CheckIn:D] Running Loop=1
2016-11-11T17:00:53.878Z,1478883653.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:53.887Z,1478883653.886 [Default:CheckIn:D] Stopped
2016-11-11T17:00:53.887Z,1478883653.887 [Default:CheckIn:E] Running Loop=1
2016-11-11T17:00:53.976Z,1478883653.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:54.772Z,1478883654.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:55.516Z,1478883655.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:56.312Z,1478883656.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:57.109Z,1478883657.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:57.342Z,1478883657.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:57.352Z,1478883657.352 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 730.876302 min 
2016-11-11T17:00:57.353Z,1478883657.353 [Default:CheckIn:E] Stopped
2016-11-11T17:00:57.353Z,1478883657.353 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T17:00:57.353Z,1478883657.353 [Default:CheckIn] Stopped
2016-11-11T17:00:57.353Z,1478883657.353 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T17:00:57.353Z,1478883657.353 [Default:CheckIn](INFO): Running loop #71
2016-11-11T17:00:57.353Z,1478883657.353 [Default:CheckIn] Running Loop=71
2016-11-11T17:00:57.354Z,1478883657.353 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T17:00:57.354Z,1478883657.354 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T17:00:57.481Z,1478883657.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:57.520Z,1478883657.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:57.817Z,1478883657.817 [NAL9602](INFO): Powering up
2016-11-11T17:00:57.861Z,1478883657.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:58.251Z,1478883658.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:58.316Z,1478883658.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:58.666Z,1478883658.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:59.057Z,1478883659.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:59.076Z,1478883659.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:00:59.456Z,1478883659.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:59.854Z,1478883659.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:00:59.872Z,1478883659.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:00.257Z,1478883660.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:00.668Z,1478883660.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:00.671Z,1478883660.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:01.051Z,1478883661.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:01.104Z,1478883661.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:01.456Z,1478883661.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:01.862Z,1478883661.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:01.900Z,1478883661.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:02.256Z,1478883662.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:02.657Z,1478883662.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:02.696Z,1478883662.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:03.056Z,1478883663.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:03.104Z,1478883663.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:03.460Z,1478883663.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:03.885Z,1478883663.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:03.900Z,1478883663.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:04.261Z,1478883664.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:04.662Z,1478883664.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:04.696Z,1478883664.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:05.052Z,1478883665.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:05.104Z,1478883665.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:05.489Z,1478883665.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:05.865Z,1478883665.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:05.900Z,1478883665.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:06.248Z,1478883666.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:06.696Z,1478883666.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:06.720Z,1478883666.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:07.048Z,1478883667.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:07.164Z,1478883667.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:07.475Z,1478883667.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:07.874Z,1478883667.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:07.960Z,1478883667.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:08.252Z,1478883668.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:08.668Z,1478883668.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:08.756Z,1478883668.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:09.047Z,1478883669.047 [NAL9602](INFO): NAL9602 initialized
2016-11-11T17:01:09.114Z,1478883669.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:09.461Z,1478883669.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:09.528Z,1478883669.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:09.865Z,1478883669.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:10.269Z,1478883670.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:10.324Z,1478883670.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:10.662Z,1478883670.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:11.098Z,1478883671.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:11.120Z,1478883671.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:11.448Z,1478883671.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:11.532Z,1478883671.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:11.855Z,1478883671.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:12.259Z,1478883672.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:12.328Z,1478883672.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:12.670Z,1478883672.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:13.016Z,1478883673.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:13.089Z,1478883673.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:13.454Z,1478883673.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:13.814Z,1478883673.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:13.858Z,1478883673.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:14.256Z,1478883674.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:14.608Z,1478883674.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:14.681Z,1478883674.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:15.016Z,1478883675.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:15.069Z,1478883675.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:15.464Z,1478883675.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:15.812Z,1478883675.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:15.845Z,1478883675.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:16.254Z,1478883676.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:16.608Z,1478883676.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:16.678Z,1478883676.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:17.016Z,1478883677.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:17.055Z,1478883677.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:17.455Z,1478883677.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:17.812Z,1478883677.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:17.860Z,1478883677.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:18.258Z,1478883678.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:18.608Z,1478883678.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:18.664Z,1478883678.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:19.016Z,1478883679.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:19.052Z,1478883679.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:19.460Z,1478883679.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:19.814Z,1478883679.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:19.905Z,1478883679.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:20.257Z,1478883680.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:20.608Z,1478883680.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:20.697Z,1478883680.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:21.085Z,1478883681.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:21.136Z,1478883681.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:21.447Z,1478883681.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:21.893Z,1478883681.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:21.933Z,1478883681.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:22.255Z,1478883682.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:22.693Z,1478883682.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:22.728Z,1478883682.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:23.088Z,1478883683.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:23.451Z,1478883683.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:23.520Z,1478883683.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:23.849Z,1478883683.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:24.258Z,1478883684.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:24.316Z,1478883684.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:24.653Z,1478883684.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:25.089Z,1478883685.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:25.112Z,1478883685.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:25.450Z,1478883685.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:25.520Z,1478883685.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:25.860Z,1478883685.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:26.252Z,1478883686.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:26.316Z,1478883686.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:26.659Z,1478883686.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:26.988Z,1478883686.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:27.073Z,1478883687.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:27.473Z,1478883687.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:27.784Z,1478883687.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:27.872Z,1478883687.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:28.273Z,1478883688.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:28.580Z,1478883688.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:28.665Z,1478883688.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:28.988Z,1478883688.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:29.069Z,1478883689.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:29.445Z,1478883689.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:29.784Z,1478883689.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:29.841Z,1478883689.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:30.250Z,1478883690.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:30.580Z,1478883690.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:30.678Z,1478883690.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:30.988Z,1478883690.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:31.054Z,1478883691.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:31.477Z,1478883691.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:31.784Z,1478883691.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:31.858Z,1478883691.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:32.261Z,1478883692.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:32.580Z,1478883692.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:32.672Z,1478883692.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:32.988Z,1478883692.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:33.069Z,1478883693.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:33.463Z,1478883693.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:33.784Z,1478883693.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:33.854Z,1478883693.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:34.281Z,1478883694.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:34.580Z,1478883694.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:34.777Z,1478883694.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:35.064Z,1478883695.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:35.116Z,1478883695.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:35.485Z,1478883695.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:35.840Z,1478883695.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:35.912Z,1478883695.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:36.285Z,1478883696.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:36.678Z,1478883696.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:36.712Z,1478883696.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:37.088Z,1478883697.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:37.477Z,1478883697.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:37.480Z,1478883697.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:37.863Z,1478883697.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:38.254Z,1478883698.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:38.276Z,1478883698.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:38.651Z,1478883698.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:39.072Z,1478883699.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:39.091Z,1478883699.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:39.452Z,1478883699.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:39.480Z,1478883699.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:39.852Z,1478883699.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:40.253Z,1478883700.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:40.276Z,1478883700.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:40.650Z,1478883700.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:40.964Z,1478883700.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:41.052Z,1478883701.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:41.460Z,1478883701.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:41.760Z,1478883701.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:41.860Z,1478883701.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:42.249Z,1478883702.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:42.557Z,1478883702.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:42.666Z,1478883702.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:42.964Z,1478883702.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:43.062Z,1478883703.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:43.466Z,1478883703.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:43.760Z,1478883703.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:43.865Z,1478883703.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:44.257Z,1478883704.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:44.556Z,1478883704.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:44.668Z,1478883704.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:44.964Z,1478883704.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:45.061Z,1478883705.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:45.441Z,1478883705.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:45.760Z,1478883705.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:45.845Z,1478883705.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:46.249Z,1478883706.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:46.556Z,1478883706.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:46.679Z,1478883706.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:46.968Z,1478883706.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:47.049Z,1478883707.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:47.457Z,1478883707.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:47.764Z,1478883707.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:47.858Z,1478883707.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:48.261Z,1478883708.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:48.560Z,1478883708.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:48.693Z,1478883708.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:49.108Z,1478883709.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:49.114Z,1478883709.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:49.464Z,1478883709.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:49.885Z,1478883709.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:49.904Z,1478883709.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:50.240Z,1478883710.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:50.685Z,1478883710.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:50.700Z,1478883710.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:51.114Z,1478883711.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:51.425Z,1478883711.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:51.445Z,1478883711.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:51.857Z,1478883711.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:52.221Z,1478883712.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:52.247Z,1478883712.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:52.648Z,1478883712.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:53.016Z,1478883713.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:53.078Z,1478883713.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:53.424Z,1478883713.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:53.469Z,1478883713.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:53.864Z,1478883713.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:54.222Z,1478883714.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:54.272Z,1478883714.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:54.944Z,1478883714.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:55.740Z,1478883715.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:56.537Z,1478883716.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:56.976Z,1478883716.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:57.613Z,1478883717.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:57.724Z,1478883717.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:57.772Z,1478883717.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:58.113Z,1478883718.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:58.537Z,1478883718.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:58.568Z,1478883718.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:58.910Z,1478883718.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:58.988Z,1478883718.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:01:59.285Z,1478883719.285 [PNI_TCM](ERROR): CRC does not match. Expected:0x52108 got:0x6335
2016-11-11T17:01:59.320Z,1478883719.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:59.693Z,1478883719.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:01:59.784Z,1478883719.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:00.091Z,1478883720.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:00.552Z,1478883720.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:00.580Z,1478883720.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:00.893Z,1478883720.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:00.988Z,1478883720.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:01.307Z,1478883721.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:01.700Z,1478883721.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:01.788Z,1478883721.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:02.112Z,1478883722.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:02.506Z,1478883722.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:02.585Z,1478883722.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:03.002Z,1478883723.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:03.088Z,1478883723.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:03.305Z,1478883723.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:03.725Z,1478883723.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:03.884Z,1478883723.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:04.081Z,1478883724.081 [PNI_TCM](ERROR): CRC does not match. Expected:0x40353 got:0x34544
2016-11-11T17:02:04.114Z,1478883724.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:04.525Z,1478883724.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:04.680Z,1478883724.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:04.971Z,1478883724.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:05.318Z,1478883725.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:05.476Z,1478883725.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:05.698Z,1478883725.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:06.094Z,1478883726.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:06.272Z,1478883726.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:06.498Z,1478883726.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:06.913Z,1478883726.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:07.068Z,1478883727.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:07.296Z,1478883727.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:07.480Z,1478883727.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:07.740Z,1478883727.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:08.124Z,1478883728.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:08.276Z,1478883728.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:08.566Z,1478883728.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:08.902Z,1478883728.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:08.980Z,1478883728.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:09.297Z,1478883729.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:09.674Z,1478883729.674 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2016-11-11T17:02:09.701Z,1478883729.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:09.776Z,1478883729.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:10.097Z,1478883730.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:10.553Z,1478883730.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:10.572Z,1478883730.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:10.893Z,1478883730.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:10.992Z,1478883730.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:11.325Z,1478883731.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:11.690Z,1478883731.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:11.788Z,1478883731.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:12.125Z,1478883732.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:12.569Z,1478883732.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:12.584Z,1478883732.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:12.900Z,1478883732.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:12.992Z,1478883732.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:13.342Z,1478883733.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:13.716Z,1478883733.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:13.788Z,1478883733.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:14.136Z,1478883734.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:14.578Z,1478883734.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:14.585Z,1478883734.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:14.906Z,1478883734.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:15.020Z,1478883735.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:15.306Z,1478883735.306 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:15.307Z,1478883735.307 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 224
2016-11-11T17:02:15.307Z,1478883735.307 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:02:15.313Z,1478883735.313 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:15.314Z,1478883735.314 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 224
2016-11-11T17:02:15.314Z,1478883735.314 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:02:15.320Z,1478883735.320 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:15.320Z,1478883735.320 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 224
2016-11-11T17:02:15.320Z,1478883735.320 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:02:15.363Z,1478883735.363 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:02:15.363Z,1478883735.363 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:02:15.363Z,1478883735.363 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:02:15.758Z,1478883735.759 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:02:15.759Z,1478883735.759 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 224
2016-11-11T17:02:15.768Z,1478883735.768 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:02:15.768Z,1478883735.768 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 224
2016-11-11T17:02:15.768Z,1478883735.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:02:15.768Z,1478883735.768 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 224
2016-11-11T17:02:15.816Z,1478883735.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:16.129Z,1478883736.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:02:16.130Z,1478883736.130 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:02:16.130Z,1478883736.130 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:02:16.135Z,1478883736.135 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:02:16.135Z,1478883736.135 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:02:16.136Z,1478883736.136 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:02:16.147Z,1478883736.148 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:02:16.148Z,1478883736.148 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:02:16.148Z,1478883736.148 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:02:16.499Z,1478883736.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:16.612Z,1478883736.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:16.961Z,1478883736.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:17.068Z,1478883737.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:17.297Z,1478883737.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:17.736Z,1478883737.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:17.864Z,1478883737.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:18.123Z,1478883738.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:18.545Z,1478883738.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:18.660Z,1478883738.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:18.970Z,1478883738.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:19.318Z,1478883739.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:19.464Z,1478883739.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:19.706Z,1478883739.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:20.105Z,1478883740.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:20.260Z,1478883740.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:20.502Z,1478883740.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:20.962Z,1478883740.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:21.056Z,1478883741.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:21.309Z,1478883741.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:21.464Z,1478883741.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:21.720Z,1478883741.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:22.125Z,1478883742.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:22.261Z,1478883742.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:22.574Z,1478883742.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:22.916Z,1478883742.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:22.976Z,1478883742.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:23.298Z,1478883743.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:23.705Z,1478883743.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:23.780Z,1478883743.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:24.097Z,1478883744.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:24.553Z,1478883744.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:24.576Z,1478883744.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:24.914Z,1478883744.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:24.992Z,1478883744.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:25.291Z,1478883745.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:25.705Z,1478883745.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:25.788Z,1478883745.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:26.122Z,1478883746.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:26.521Z,1478883746.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:26.584Z,1478883746.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:26.913Z,1478883746.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:27.000Z,1478883747.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:27.305Z,1478883747.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:27.700Z,1478883747.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:27.796Z,1478883747.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:28.112Z,1478883748.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:28.521Z,1478883748.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:28.592Z,1478883748.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:28.894Z,1478883748.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:29.008Z,1478883749.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:29.297Z,1478883749.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:29.698Z,1478883749.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:29.804Z,1478883749.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:30.102Z,1478883750.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:30.509Z,1478883750.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:30.600Z,1478883750.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:30.950Z,1478883750.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:31.052Z,1478883751.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:31.317Z,1478883751.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:31.701Z,1478883751.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:31.848Z,1478883751.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:32.103Z,1478883752.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:32.493Z,1478883752.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:32.644Z,1478883752.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:32.951Z,1478883752.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:33.301Z,1478883753.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:33.372Z,1478883753.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:33.681Z,1478883753.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:34.069Z,1478883754.069 [BPC1](ERROR): Failed to receive battery data
2016-11-11T17:02:34.069Z,1478883754.069 [BPC1] Communications Fault, FailCount= 1
2016-11-11T17:02:34.069Z,1478883754.069 [BPC1](ERROR): Communications Fault
2016-11-11T17:02:34.081Z,1478883754.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:34.137Z,1478883754.137 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T17:02:34.168Z,1478883754.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:34.489Z,1478883754.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:34.938Z,1478883754.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:34.964Z,1478883754.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:35.293Z,1478883755.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:35.312Z,1478883755.312 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:02:35.312Z,1478883755.312 [BPC1] No Fault, FailCount= 1
2016-11-11T17:02:35.376Z,1478883755.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:35.761Z,1478883755.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:36.101Z,1478883756.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:36.172Z,1478883756.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:36.540Z,1478883756.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:36.903Z,1478883756.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:36.960Z,1478883756.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:37.296Z,1478883757.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:37.695Z,1478883757.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:37.756Z,1478883757.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:38.097Z,1478883758.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:38.517Z,1478883758.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:38.552Z,1478883758.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:38.901Z,1478883758.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:38.960Z,1478883758.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:39.301Z,1478883759.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:39.685Z,1478883759.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:39.756Z,1478883759.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:40.092Z,1478883760.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:40.521Z,1478883760.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:40.564Z,1478883760.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:40.896Z,1478883760.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:40.976Z,1478883760.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:41.305Z,1478883761.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:41.712Z,1478883761.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:41.772Z,1478883761.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:42.106Z,1478883762.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:42.509Z,1478883762.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:42.568Z,1478883762.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:42.876Z,1478883762.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:42.976Z,1478883762.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:43.292Z,1478883763.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:43.687Z,1478883763.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:43.772Z,1478883763.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:44.089Z,1478883764.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:44.494Z,1478883764.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:44.568Z,1478883764.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:44.897Z,1478883764.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:45.008Z,1478883765.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:45.293Z,1478883765.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:45.692Z,1478883765.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:45.804Z,1478883765.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:46.106Z,1478883766.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:46.511Z,1478883766.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:46.600Z,1478883766.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:46.978Z,1478883766.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:47.289Z,1478883767.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:47.364Z,1478883767.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:47.717Z,1478883767.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:48.111Z,1478883768.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:48.160Z,1478883768.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:48.513Z,1478883768.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:48.956Z,1478883768.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:48.975Z,1478883768.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:49.311Z,1478883769.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:49.364Z,1478883769.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:49.711Z,1478883769.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:50.089Z,1478883770.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:50.160Z,1478883770.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:50.504Z,1478883770.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:50.889Z,1478883770.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:50.896Z,1478883770.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:51.287Z,1478883771.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:51.685Z,1478883771.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:51.692Z,1478883771.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:52.093Z,1478883772.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:52.488Z,1478883772.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:52.535Z,1478883772.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:52.893Z,1478883772.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:52.968Z,1478883772.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:53.306Z,1478883773.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:53.705Z,1478883773.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:53.764Z,1478883773.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:54.101Z,1478883774.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:54.495Z,1478883774.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:54.560Z,1478883774.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:54.968Z,1478883774.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:55.764Z,1478883775.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:56.560Z,1478883776.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:56.968Z,1478883776.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:57.764Z,1478883777.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:58.222Z,1478883778.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:58.384Z,1478883778.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:58.560Z,1478883778.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:58.732Z,1478883778.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:58.968Z,1478883778.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:59.120Z,1478883779.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:59.534Z,1478883779.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:02:59.766Z,1478883779.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:02:59.907Z,1478883779.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:00.358Z,1478883780.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:00.560Z,1478883780.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:00.741Z,1478883780.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:01.120Z,1478883781.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:01.304Z,1478883781.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:01.514Z,1478883781.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:01.918Z,1478883781.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:02.100Z,1478883782.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:02.364Z,1478883782.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:02.726Z,1478883782.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:02.896Z,1478883782.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:03.156Z,1478883783.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:03.308Z,1478883783.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:03.525Z,1478883783.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:03.953Z,1478883783.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:04.104Z,1478883784.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:04.346Z,1478883784.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:04.726Z,1478883784.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:04.868Z,1478883784.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:05.139Z,1478883785.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:05.533Z,1478883785.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:05.664Z,1478883785.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:05.929Z,1478883785.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:06.326Z,1478883786.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:06.460Z,1478883786.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:06.729Z,1478883786.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:06.872Z,1478883786.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:07.113Z,1478883787.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:07.496Z,1478883787.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:07.521Z,1478883787.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:07.668Z,1478883787.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:07.895Z,1478883787.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:07.910Z,1478883787.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:08.302Z,1478883788.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:08.317Z,1478883788.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:08.464Z,1478883788.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:08.780Z,1478883788.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:08.872Z,1478883788.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:09.139Z,1478883789.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:09.521Z,1478883789.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:09.668Z,1478883789.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:09.929Z,1478883789.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:10.322Z,1478883790.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:10.464Z,1478883790.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:10.731Z,1478883790.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:10.872Z,1478883790.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:11.127Z,1478883791.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:11.524Z,1478883791.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:11.668Z,1478883791.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:11.923Z,1478883791.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:12.329Z,1478883792.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:12.466Z,1478883792.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:12.781Z,1478883792.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:12.924Z,1478883792.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:13.129Z,1478883793.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:13.537Z,1478883793.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:13.720Z,1478883793.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:13.933Z,1478883793.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:14.327Z,1478883794.327 [BPC1](ERROR): Failed to parse message.
2016-11-11T17:03:14.327Z,1478883794.327 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T17:03:14.327Z,1478883794.327 [BPC1] Data Fault, FailCount= 1
2016-11-11T17:03:14.327Z,1478883794.327 [BPC1](ERROR): Data Fault
2016-11-11T17:03:14.350Z,1478883794.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:14.427Z,1478883794.427 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T17:03:14.516Z,1478883794.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:14.760Z,1478883794.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:15.127Z,1478883795.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:15.296Z,1478883795.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:15.529Z,1478883795.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:15.549Z,1478883795.549 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:03:15.549Z,1478883795.549 [BPC1] No Fault, FailCount= 1
2016-11-11T17:03:15.989Z,1478883795.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:16.092Z,1478883796.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:16.328Z,1478883796.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:16.745Z,1478883796.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:16.888Z,1478883796.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:17.130Z,1478883797.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:17.296Z,1478883797.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:17.507Z,1478883797.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:17.909Z,1478883797.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:18.092Z,1478883798.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:18.306Z,1478883798.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:18.725Z,1478883798.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:18.832Z,1478883798.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:19.118Z,1478883799.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:19.519Z,1478883799.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:19.628Z,1478883799.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:19.938Z,1478883799.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:20.323Z,1478883800.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:20.424Z,1478883800.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:20.735Z,1478883800.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:20.836Z,1478883800.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:21.141Z,1478883801.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:21.513Z,1478883801.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:21.632Z,1478883801.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:21.899Z,1478883801.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:21.914Z,1478883801.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:22.299Z,1478883802.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:22.314Z,1478883802.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:22.428Z,1478883802.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:22.693Z,1478883802.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:22.735Z,1478883802.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:22.836Z,1478883802.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:23.096Z,1478883803.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:23.124Z,1478883803.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:23.499Z,1478883803.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:23.521Z,1478883803.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:23.632Z,1478883803.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:23.891Z,1478883803.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:23.926Z,1478883803.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:24.292Z,1478883804.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:24.363Z,1478883804.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:24.428Z,1478883804.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:24.708Z,1478883804.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:24.729Z,1478883804.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:24.844Z,1478883804.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:25.116Z,1478883805.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:25.131Z,1478883805.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:25.520Z,1478883805.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:25.561Z,1478883805.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:25.640Z,1478883805.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:25.904Z,1478883805.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:25.938Z,1478883805.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:26.317Z,1478883806.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:26.334Z,1478883806.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:26.437Z,1478883806.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:26.694Z,1478883806.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:26.737Z,1478883806.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:26.913Z,1478883806.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:27.094Z,1478883807.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:27.147Z,1478883807.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:27.501Z,1478883807.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:27.533Z,1478883807.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:27.708Z,1478883807.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:27.896Z,1478883807.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:27.922Z,1478883807.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:28.295Z,1478883808.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:28.317Z,1478883808.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:28.504Z,1478883808.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:28.709Z,1478883808.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:28.757Z,1478883808.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:29.112Z,1478883809.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:29.145Z,1478883809.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:29.288Z,1478883809.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:29.521Z,1478883809.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:29.569Z,1478883809.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:29.898Z,1478883809.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:29.922Z,1478883809.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:30.084Z,1478883810.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:30.312Z,1478883810.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:30.350Z,1478883810.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:30.714Z,1478883810.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:30.765Z,1478883810.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:30.880Z,1478883810.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:31.111Z,1478883811.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:31.170Z,1478883811.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:31.288Z,1478883811.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:31.524Z,1478883811.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:31.557Z,1478883811.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:31.891Z,1478883811.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:31.907Z,1478883811.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:32.084Z,1478883812.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:32.295Z,1478883812.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:32.356Z,1478883812.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:32.712Z,1478883812.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:32.727Z,1478883812.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:32.880Z,1478883812.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:33.094Z,1478883813.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:33.137Z,1478883813.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:33.288Z,1478883813.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:33.495Z,1478883813.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:33.534Z,1478883813.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:33.892Z,1478883813.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:33.924Z,1478883813.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:34.084Z,1478883814.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:34.292Z,1478883814.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:34.369Z,1478883814.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:34.699Z,1478883814.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:34.714Z,1478883814.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:34.796Z,1478883814.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:35.100Z,1478883815.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:35.115Z,1478883815.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:35.504Z,1478883815.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:35.524Z,1478883815.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:35.592Z,1478883815.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:35.908Z,1478883815.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:35.923Z,1478883815.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:36.352Z,1478883816.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:36.388Z,1478883816.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:36.400Z,1478883816.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:36.701Z,1478883816.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:36.734Z,1478883816.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:36.820Z,1478883816.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:37.100Z,1478883817.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:37.118Z,1478883817.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:37.502Z,1478883817.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:37.518Z,1478883817.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:37.616Z,1478883817.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:37.899Z,1478883817.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:37.940Z,1478883817.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:38.297Z,1478883818.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:38.357Z,1478883818.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:38.412Z,1478883818.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:38.692Z,1478883818.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:38.722Z,1478883818.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:38.820Z,1478883818.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:39.093Z,1478883819.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:39.123Z,1478883819.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:39.495Z,1478883819.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:39.511Z,1478883819.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:39.616Z,1478883819.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:39.899Z,1478883819.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:39.919Z,1478883819.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:40.294Z,1478883820.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:40.325Z,1478883820.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:40.413Z,1478883820.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:40.717Z,1478883820.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:40.740Z,1478883820.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:40.872Z,1478883820.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:41.107Z,1478883821.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:41.149Z,1478883821.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:41.499Z,1478883821.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:41.557Z,1478883821.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:41.668Z,1478883821.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:41.902Z,1478883821.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:41.925Z,1478883821.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:42.317Z,1478883822.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:42.389Z,1478883822.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:42.464Z,1478883822.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:42.698Z,1478883822.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:42.731Z,1478883822.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:43.101Z,1478883823.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:43.144Z,1478883823.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:43.256Z,1478883823.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:43.506Z,1478883823.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:43.557Z,1478883823.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:43.905Z,1478883823.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:43.946Z,1478883823.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:44.052Z,1478883824.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:44.311Z,1478883824.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:44.369Z,1478883824.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:44.709Z,1478883824.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:44.716Z,1478883824.716 [PNI_TCM](ERROR): CRC does not match. Expected:0x61915 got:0x16913
2016-11-11T17:03:44.781Z,1478883824.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:44.848Z,1478883824.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:45.094Z,1478883825.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:45.131Z,1478883825.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:45.272Z,1478883825.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:45.511Z,1478883825.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:45.530Z,1478883825.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:45.910Z,1478883825.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:45.928Z,1478883825.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:46.068Z,1478883826.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:46.347Z,1478883826.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:46.416Z,1478883826.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:46.698Z,1478883826.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:46.725Z,1478883826.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:46.804Z,1478883826.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:47.110Z,1478883827.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:47.124Z,1478883827.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:47.509Z,1478883827.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:47.555Z,1478883827.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:47.600Z,1478883827.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:47.917Z,1478883827.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:47.924Z,1478883827.924 [PNI_TCM](ERROR): CRC does not match. Expected:0x22404 got:0x1857
2016-11-11T17:03:47.950Z,1478883827.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:48.329Z,1478883828.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:48.384Z,1478883828.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:48.396Z,1478883828.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:48.715Z,1478883828.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:48.730Z,1478883828.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:48.804Z,1478883828.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:49.109Z,1478883829.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:49.132Z,1478883829.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:49.511Z,1478883829.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:49.542Z,1478883829.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:49.600Z,1478883829.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:49.902Z,1478883829.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:49.930Z,1478883829.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:50.325Z,1478883830.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:50.354Z,1478883830.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:50.396Z,1478883830.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:50.691Z,1478883830.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:50.724Z,1478883830.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:50.808Z,1478883830.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:51.093Z,1478883831.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:51.133Z,1478883831.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:51.494Z,1478883831.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:51.529Z,1478883831.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:51.604Z,1478883831.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:51.894Z,1478883831.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:51.930Z,1478883831.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:52.306Z,1478883832.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:52.357Z,1478883832.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:52.400Z,1478883832.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:52.693Z,1478883832.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:52.726Z,1478883832.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:52.808Z,1478883832.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:53.098Z,1478883833.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:53.125Z,1478883833.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:53.496Z,1478883833.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:53.520Z,1478883833.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:53.604Z,1478883833.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:53.908Z,1478883833.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:53.929Z,1478883833.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:54.308Z,1478883834.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:54.342Z,1478883834.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:54.401Z,1478883834.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:54.724Z,1478883834.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:54.744Z,1478883834.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:54.872Z,1478883834.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:55.668Z,1478883835.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:56.464Z,1478883836.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:57.228Z,1478883837.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:58.024Z,1478883838.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:58.052Z,1478883838.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:58.141Z,1478883838.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:58.238Z,1478883838.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:58.276Z,1478883838.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:58.617Z,1478883838.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:58.673Z,1478883838.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:58.820Z,1478883838.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:59.032Z,1478883839.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:59.065Z,1478883839.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:59.228Z,1478883839.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:59.448Z,1478883839.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:59.531Z,1478883839.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:03:59.832Z,1478883839.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:03:59.886Z,1478883839.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:00.024Z,1478883840.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:00.228Z,1478883840.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:00.243Z,1478883840.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:00.621Z,1478883840.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:00.654Z,1478883840.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:00.764Z,1478883840.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:01.017Z,1478883841.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:01.043Z,1478883841.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:01.421Z,1478883841.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:01.448Z,1478883841.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:01.560Z,1478883841.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:01.817Z,1478883841.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:01.849Z,1478883841.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:02.217Z,1478883842.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:02.249Z,1478883842.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:02.356Z,1478883842.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:02.613Z,1478883842.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:02.633Z,1478883842.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:02.764Z,1478883842.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:03.013Z,1478883843.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:03.049Z,1478883843.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:03.417Z,1478883843.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:03.453Z,1478883843.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:03.560Z,1478883843.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:03.817Z,1478883843.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:03.831Z,1478883843.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:04.232Z,1478883844.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:04.312Z,1478883844.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:04.356Z,1478883844.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:04.636Z,1478883844.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:04.666Z,1478883844.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:04.792Z,1478883844.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:05.027Z,1478883845.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:05.063Z,1478883845.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:05.424Z,1478883845.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:05.458Z,1478883845.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:05.588Z,1478883845.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:05.817Z,1478883845.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:05.853Z,1478883845.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:06.213Z,1478883846.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:06.228Z,1478883846.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:06.384Z,1478883846.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:06.625Z,1478883846.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:06.647Z,1478883846.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:06.792Z,1478883846.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:07.017Z,1478883847.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:07.054Z,1478883847.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:07.414Z,1478883847.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:07.453Z,1478883847.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:07.588Z,1478883847.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:07.813Z,1478883847.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:07.833Z,1478883847.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:08.221Z,1478883848.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:08.261Z,1478883848.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:08.385Z,1478883848.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:08.625Z,1478883848.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:08.666Z,1478883848.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:08.828Z,1478883848.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:09.018Z,1478883849.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:09.042Z,1478883849.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:09.428Z,1478883849.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:09.444Z,1478883849.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:09.624Z,1478883849.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:09.831Z,1478883849.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:09.849Z,1478883849.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:10.234Z,1478883850.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:10.250Z,1478883850.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:10.420Z,1478883850.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:10.632Z,1478883850.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:10.693Z,1478883850.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:11.017Z,1478883851.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:11.049Z,1478883851.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:11.216Z,1478883851.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:11.416Z,1478883851.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:11.446Z,1478883851.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:11.817Z,1478883851.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:11.889Z,1478883851.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:12.012Z,1478883852.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:12.218Z,1478883852.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:12.245Z,1478883852.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:12.614Z,1478883852.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:12.687Z,1478883852.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:12.808Z,1478883852.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:13.021Z,1478883853.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:13.057Z,1478883853.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:13.413Z,1478883853.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:13.460Z,1478883853.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:13.604Z,1478883853.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:13.813Z,1478883853.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:13.860Z,1478883853.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:14.012Z,1478883854.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:14.213Z,1478883854.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:14.279Z,1478883854.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:14.627Z,1478883854.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:14.664Z,1478883854.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:14.752Z,1478883854.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:15.024Z,1478883855.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:15.057Z,1478883855.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:15.428Z,1478883855.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:15.460Z,1478883855.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:15.548Z,1478883855.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:15.831Z,1478883855.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:15.850Z,1478883855.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:16.213Z,1478883856.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:16.306Z,1478883856.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:16.344Z,1478883856.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:16.617Z,1478883856.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:16.649Z,1478883856.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:16.776Z,1478883856.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:17.014Z,1478883857.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:17.033Z,1478883857.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:17.420Z,1478883857.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:17.449Z,1478883857.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:17.572Z,1478883857.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:17.825Z,1478883857.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:17.845Z,1478883857.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:18.213Z,1478883858.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:18.305Z,1478883858.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:18.368Z,1478883858.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:18.613Z,1478883858.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:18.659Z,1478883858.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:18.776Z,1478883858.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:19.017Z,1478883859.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:19.040Z,1478883859.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:19.413Z,1478883859.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:19.448Z,1478883859.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:19.572Z,1478883859.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:19.835Z,1478883859.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:19.853Z,1478883859.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:20.232Z,1478883860.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:20.324Z,1478883860.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:20.368Z,1478883860.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:20.629Z,1478883860.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:20.657Z,1478883860.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:20.776Z,1478883860.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:21.036Z,1478883861.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:21.070Z,1478883861.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:21.421Z,1478883861.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:21.441Z,1478883861.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:21.572Z,1478883861.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:21.816Z,1478883861.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:21.837Z,1478883861.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:22.220Z,1478883862.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:22.239Z,1478883862.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:22.369Z,1478883862.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:22.628Z,1478883862.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:22.643Z,1478883862.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:22.808Z,1478883862.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:23.020Z,1478883863.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:23.042Z,1478883863.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:23.421Z,1478883863.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:23.447Z,1478883863.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:23.604Z,1478883863.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:23.817Z,1478883863.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:23.853Z,1478883863.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:24.213Z,1478883864.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:24.267Z,1478883864.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:24.400Z,1478883864.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:24.617Z,1478883864.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:24.656Z,1478883864.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:25.028Z,1478883865.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:25.057Z,1478883865.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:25.184Z,1478883865.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:25.430Z,1478883865.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:25.474Z,1478883865.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:25.828Z,1478883865.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:25.862Z,1478883865.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:25.980Z,1478883865.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:26.224Z,1478883866.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:26.253Z,1478883866.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:26.617Z,1478883866.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:26.668Z,1478883866.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:26.776Z,1478883866.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:27.016Z,1478883867.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:27.053Z,1478883867.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:27.184Z,1478883867.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:27.413Z,1478883867.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:27.476Z,1478883867.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:27.813Z,1478883867.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:27.878Z,1478883867.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:27.980Z,1478883867.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:28.213Z,1478883868.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:28.286Z,1478883868.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:28.614Z,1478883868.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:28.632Z,1478883868.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:28.728Z,1478883868.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:29.014Z,1478883869.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:29.033Z,1478883869.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:29.420Z,1478883869.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:29.438Z,1478883869.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:29.524Z,1478883869.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:29.821Z,1478883869.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:29.840Z,1478883869.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:30.236Z,1478883870.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:30.288Z,1478883870.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:30.320Z,1478883870.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:30.631Z,1478883870.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:30.678Z,1478883870.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:30.760Z,1478883870.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:31.035Z,1478883871.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:31.052Z,1478883871.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:31.436Z,1478883871.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:31.464Z,1478883871.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:31.556Z,1478883871.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:31.815Z,1478883871.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:31.841Z,1478883871.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:32.230Z,1478883872.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:32.309Z,1478883872.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:32.352Z,1478883872.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:32.617Z,1478883872.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:32.655Z,1478883872.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:32.760Z,1478883872.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:33.014Z,1478883873.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:33.048Z,1478883873.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:33.419Z,1478883873.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:33.443Z,1478883873.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:33.556Z,1478883873.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:33.813Z,1478883873.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:33.847Z,1478883873.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:34.229Z,1478883874.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:34.293Z,1478883874.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:34.352Z,1478883874.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:34.623Z,1478883874.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:34.655Z,1478883874.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:34.760Z,1478883874.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:35.019Z,1478883875.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:35.061Z,1478883875.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:35.432Z,1478883875.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:35.470Z,1478883875.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:35.556Z,1478883875.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:35.830Z,1478883875.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:35.837Z,1478883875.837 [PNI_TCM](ERROR): CRC does not match. Expected:0x19331 got:0x17019
2016-11-11T17:04:35.869Z,1478883875.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:36.236Z,1478883876.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:36.268Z,1478883876.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:36.353Z,1478883876.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:36.626Z,1478883876.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:36.650Z,1478883876.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:36.800Z,1478883876.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:37.017Z,1478883877.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:37.057Z,1478883877.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:37.414Z,1478883877.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:37.449Z,1478883877.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:37.596Z,1478883877.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:37.824Z,1478883877.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:37.852Z,1478883877.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:38.215Z,1478883878.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:38.242Z,1478883878.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:38.392Z,1478883878.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:38.617Z,1478883878.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:38.656Z,1478883878.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:39.013Z,1478883879.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:39.069Z,1478883879.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:39.176Z,1478883879.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:39.418Z,1478883879.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:39.438Z,1478883879.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:39.821Z,1478883879.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:39.883Z,1478883879.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:39.972Z,1478883879.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:40.213Z,1478883880.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:40.253Z,1478883880.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:40.632Z,1478883880.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:40.643Z,1478883880.643 [PNI_TCM](ERROR): CRC does not match. Expected:0x53521 got:0x49149
2016-11-11T17:04:40.718Z,1478883880.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:40.768Z,1478883880.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:41.037Z,1478883881.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:41.057Z,1478883881.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:41.176Z,1478883881.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:41.428Z,1478883881.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:41.493Z,1478883881.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:41.830Z,1478883881.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:41.890Z,1478883881.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:41.972Z,1478883881.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:42.246Z,1478883882.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:42.314Z,1478883882.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:42.615Z,1478883882.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:42.631Z,1478883882.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:42.708Z,1478883882.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:43.018Z,1478883883.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:43.034Z,1478883883.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:43.413Z,1478883883.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:43.457Z,1478883883.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:43.504Z,1478883883.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:43.815Z,1478883883.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:43.832Z,1478883883.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:44.228Z,1478883884.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:44.291Z,1478883884.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:44.300Z,1478883884.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:44.626Z,1478883884.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:44.641Z,1478883884.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:44.724Z,1478883884.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:45.016Z,1478883885.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:45.053Z,1478883885.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:45.426Z,1478883885.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:45.433Z,1478883885.433 [PNI_TCM](ERROR): CRC does not match. Expected:0x11179 got:0x100
2016-11-11T17:04:45.461Z,1478883885.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:45.520Z,1478883885.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:45.836Z,1478883885.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:45.851Z,1478883885.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:46.264Z,1478883886.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:46.296Z,1478883886.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:46.316Z,1478883886.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:46.646Z,1478883886.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:46.661Z,1478883886.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:46.724Z,1478883886.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:47.028Z,1478883887.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:47.060Z,1478883887.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:47.421Z,1478883887.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:47.436Z,1478883887.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:47.520Z,1478883887.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:47.821Z,1478883887.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:47.841Z,1478883887.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:48.275Z,1478883888.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:48.316Z,1478883888.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:48.328Z,1478883888.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:48.626Z,1478883888.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:48.653Z,1478883888.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:48.724Z,1478883888.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:49.016Z,1478883889.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:49.049Z,1478883889.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:49.418Z,1478883889.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:49.450Z,1478883889.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:49.520Z,1478883889.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:49.816Z,1478883889.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:49.848Z,1478883889.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:50.221Z,1478883890.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:50.257Z,1478883890.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:50.317Z,1478883890.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:50.614Z,1478883890.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:50.642Z,1478883890.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:50.808Z,1478883890.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:51.040Z,1478883891.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:51.056Z,1478883891.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:51.426Z,1478883891.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:51.458Z,1478883891.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:51.604Z,1478883891.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:51.827Z,1478883891.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:51.864Z,1478883891.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:52.228Z,1478883892.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:52.265Z,1478883892.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:52.400Z,1478883892.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:52.614Z,1478883892.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:52.702Z,1478883892.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:53.016Z,1478883893.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:53.037Z,1478883893.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:53.168Z,1478883893.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:53.419Z,1478883893.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:53.446Z,1478883893.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:53.820Z,1478883893.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:53.854Z,1478883893.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:53.964Z,1478883893.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:54.229Z,1478883894.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:54.257Z,1478883894.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:54.616Z,1478883894.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:54.644Z,1478883894.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:54.760Z,1478883894.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:55.020Z,1478883895.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:55.057Z,1478883895.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:55.168Z,1478883895.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:55.964Z,1478883895.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:56.672Z,1478883896.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:57.468Z,1478883897.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:58.264Z,1478883898.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:58.469Z,1478883898.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:58.517Z,1478883898.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:58.632Z,1478883898.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:58.647Z,1478883898.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:58.672Z,1478883898.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:58.985Z,1478883898.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:59.037Z,1478883899.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:59.380Z,1478883899.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:59.437Z,1478883899.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:04:59.468Z,1478883899.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:59.768Z,1478883899.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:04:59.801Z,1478883899.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:00.172Z,1478883900.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:00.246Z,1478883900.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:00.264Z,1478883900.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:00.570Z,1478883900.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:00.598Z,1478883900.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:00.672Z,1478883900.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:00.965Z,1478883900.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:01.006Z,1478883901.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:01.365Z,1478883901.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:01.404Z,1478883901.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:01.468Z,1478883901.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:01.765Z,1478883901.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:01.786Z,1478883901.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:02.170Z,1478883902.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:02.257Z,1478883902.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:02.264Z,1478883902.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:02.568Z,1478883902.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:02.601Z,1478883902.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:02.672Z,1478883902.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:02.969Z,1478883902.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:02.992Z,1478883902.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:03.382Z,1478883903.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:03.397Z,1478883903.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:03.468Z,1478883903.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:03.781Z,1478883903.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:03.801Z,1478883903.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:04.183Z,1478883904.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:04.224Z,1478883904.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:04.264Z,1478883904.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:04.582Z,1478883904.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:04.641Z,1478883904.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:04.760Z,1478883904.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:04.965Z,1478883904.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:04.994Z,1478883904.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:05.367Z,1478883905.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:05.399Z,1478883905.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:05.556Z,1478883905.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:05.765Z,1478883905.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:05.805Z,1478883905.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:06.169Z,1478883906.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:06.204Z,1478883906.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:06.352Z,1478883906.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:06.567Z,1478883906.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:06.596Z,1478883906.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:06.976Z,1478883906.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:06.997Z,1478883906.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:07.140Z,1478883907.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:07.368Z,1478883907.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:07.398Z,1478883907.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:07.775Z,1478883907.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:07.792Z,1478883907.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:07.936Z,1478883907.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:08.171Z,1478883908.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:08.203Z,1478883908.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:08.585Z,1478883908.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:08.604Z,1478883908.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:08.732Z,1478883908.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:08.976Z,1478883908.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:09.012Z,1478883909.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:09.140Z,1478883909.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:09.382Z,1478883909.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:09.421Z,1478883909.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:09.781Z,1478883909.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:09.812Z,1478883909.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:09.936Z,1478883909.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:10.211Z,1478883910.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:10.255Z,1478883910.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:10.574Z,1478883910.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:10.617Z,1478883910.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:10.680Z,1478883910.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:10.965Z,1478883910.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:10.995Z,1478883910.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:11.367Z,1478883911.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:11.374Z,1478883911.374 [PNI_TCM](ERROR): CRC does not match. Expected:0x34217 got:0x24873
2016-11-11T17:05:11.418Z,1478883911.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:11.476Z,1478883911.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:11.768Z,1478883911.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:11.807Z,1478883911.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:12.171Z,1478883912.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:12.258Z,1478883912.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:12.272Z,1478883912.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:12.570Z,1478883912.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:12.586Z,1478883912.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:12.680Z,1478883912.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:12.971Z,1478883912.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:13.021Z,1478883913.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:13.373Z,1478883913.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:13.429Z,1478883913.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:13.476Z,1478883913.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:13.785Z,1478883913.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:13.817Z,1478883913.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:14.226Z,1478883914.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:14.246Z,1478883914.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:14.272Z,1478883914.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:14.588Z,1478883914.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:14.620Z,1478883914.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:14.680Z,1478883914.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:14.982Z,1478883914.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:15.001Z,1478883915.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:15.369Z,1478883915.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:15.394Z,1478883915.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:15.476Z,1478883915.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:15.780Z,1478883915.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:15.795Z,1478883915.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:16.227Z,1478883916.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:16.258Z,1478883916.258 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:16.259Z,1478883916.259 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 225
2016-11-11T17:05:16.259Z,1478883916.259 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:05:16.265Z,1478883916.265 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:16.265Z,1478883916.265 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 225
2016-11-11T17:05:16.265Z,1478883916.265 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:05:16.267Z,1478883916.267 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:16.267Z,1478883916.267 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 225
2016-11-11T17:05:16.268Z,1478883916.267 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:05:16.272Z,1478883916.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:16.310Z,1478883916.310 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:05:16.310Z,1478883916.310 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:05:16.310Z,1478883916.310 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:05:16.566Z,1478883916.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:16.638Z,1478883916.638 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:05:16.638Z,1478883916.638 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 225
2016-11-11T17:05:16.643Z,1478883916.643 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:05:16.643Z,1478883916.643 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 225
2016-11-11T17:05:16.644Z,1478883916.644 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:05:16.644Z,1478883916.644 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 225
2016-11-11T17:05:16.680Z,1478883916.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:16.966Z,1478883916.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:17.017Z,1478883917.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:05:17.018Z,1478883917.018 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:05:17.018Z,1478883917.018 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:05:17.023Z,1478883917.023 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:05:17.023Z,1478883917.023 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:05:17.024Z,1478883917.024 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:05:17.024Z,1478883917.024 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:05:17.024Z,1478883917.024 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:05:17.025Z,1478883917.025 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:05:17.368Z,1478883917.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:17.395Z,1478883917.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:17.476Z,1478883917.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:17.770Z,1478883917.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:17.789Z,1478883917.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:18.176Z,1478883918.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:18.197Z,1478883918.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:18.273Z,1478883918.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:18.566Z,1478883918.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:18.608Z,1478883918.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:18.736Z,1478883918.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:18.980Z,1478883918.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:18.987Z,1478883918.987 [PNI_TCM](ERROR): CRC does not match. Expected:0x40659 got:0x19740
2016-11-11T17:05:19.016Z,1478883919.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:19.384Z,1478883919.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:19.417Z,1478883919.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:19.532Z,1478883919.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:19.784Z,1478883919.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:19.813Z,1478883919.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:20.182Z,1478883920.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:20.212Z,1478883920.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:20.328Z,1478883920.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:20.578Z,1478883920.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:20.605Z,1478883920.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:20.978Z,1478883920.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:20.993Z,1478883920.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:21.108Z,1478883921.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:21.378Z,1478883921.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:21.393Z,1478883921.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:21.785Z,1478883921.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:21.800Z,1478883921.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:21.904Z,1478883921.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:22.176Z,1478883922.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:22.198Z,1478883922.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:22.567Z,1478883922.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:22.595Z,1478883922.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:22.700Z,1478883922.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:22.974Z,1478883922.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:22.990Z,1478883922.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:23.112Z,1478883923.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:23.376Z,1478883923.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:23.391Z,1478883923.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:23.770Z,1478883923.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:23.802Z,1478883923.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:23.908Z,1478883923.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:24.226Z,1478883924.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:24.299Z,1478883924.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:24.587Z,1478883924.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:24.607Z,1478883924.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:24.644Z,1478883924.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:24.983Z,1478883924.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:25.018Z,1478883925.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:25.388Z,1478883925.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:25.429Z,1478883925.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:25.440Z,1478883925.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:25.773Z,1478883925.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:25.837Z,1478883925.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:26.191Z,1478883926.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:26.236Z,1478883926.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:26.238Z,1478883926.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:26.582Z,1478883926.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:26.597Z,1478883926.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:26.660Z,1478883926.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:26.978Z,1478883926.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:27.032Z,1478883927.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:27.370Z,1478883927.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:27.391Z,1478883927.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:27.456Z,1478883927.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:27.772Z,1478883927.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:27.836Z,1478883927.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:28.187Z,1478883928.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:28.249Z,1478883928.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:28.252Z,1478883928.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:28.577Z,1478883928.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:28.597Z,1478883928.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:28.660Z,1478883928.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:28.981Z,1478883928.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:29.007Z,1478883929.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:29.388Z,1478883929.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:29.409Z,1478883929.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:29.456Z,1478883929.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:29.784Z,1478883929.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:29.806Z,1478883929.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:30.208Z,1478883930.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:30.239Z,1478883930.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:30.253Z,1478883930.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:30.612Z,1478883930.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:30.672Z,1478883930.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:30.985Z,1478883930.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:31.386Z,1478883931.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:31.468Z,1478883931.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:31.793Z,1478883931.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:32.188Z,1478883932.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:32.265Z,1478883932.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:32.597Z,1478883932.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:32.720Z,1478883932.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:32.997Z,1478883932.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:33.397Z,1478883933.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:33.516Z,1478883933.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:33.793Z,1478883933.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:34.200Z,1478883934.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:34.312Z,1478883934.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:34.660Z,1478883934.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:35.002Z,1478883935.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:35.100Z,1478883935.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:35.409Z,1478883935.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:35.802Z,1478883935.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:35.896Z,1478883935.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:36.203Z,1478883936.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:36.633Z,1478883936.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:36.692Z,1478883936.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:36.996Z,1478883936.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:37.100Z,1478883937.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:37.393Z,1478883937.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:37.793Z,1478883937.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:37.896Z,1478883937.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:38.236Z,1478883938.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:38.592Z,1478883938.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:38.636Z,1478883938.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:38.998Z,1478883938.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:39.394Z,1478883939.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:39.432Z,1478883939.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:39.808Z,1478883939.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:40.228Z,1478883940.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:40.294Z,1478883940.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:40.607Z,1478883940.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:40.636Z,1478883940.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:40.994Z,1478883940.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:41.413Z,1478883941.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:41.432Z,1478883941.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:41.788Z,1478883941.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:42.226Z,1478883942.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:42.228Z,1478883942.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:42.629Z,1478883942.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:42.636Z,1478883942.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:42.996Z,1478883942.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:43.390Z,1478883943.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:43.432Z,1478883943.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:43.801Z,1478883943.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:44.206Z,1478883944.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:44.228Z,1478883944.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:44.593Z,1478883944.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:44.636Z,1478883944.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:45.006Z,1478883945.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:45.420Z,1478883945.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:45.432Z,1478883945.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:45.809Z,1478883945.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:46.225Z,1478883946.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:46.229Z,1478883946.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:46.589Z,1478883946.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:46.720Z,1478883946.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:46.987Z,1478883946.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:47.390Z,1478883947.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:47.516Z,1478883947.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:47.788Z,1478883947.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:48.186Z,1478883948.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:48.312Z,1478883948.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:48.644Z,1478883948.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:48.991Z,1478883948.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:49.080Z,1478883949.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:49.389Z,1478883949.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:49.792Z,1478883949.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:49.876Z,1478883949.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:50.205Z,1478883950.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:50.642Z,1478883950.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:50.672Z,1478883950.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:51.024Z,1478883951.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:51.112Z,1478883951.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:51.408Z,1478883951.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:51.803Z,1478883951.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:51.908Z,1478883951.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:52.217Z,1478883952.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:52.586Z,1478883952.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:52.616Z,1478883952.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:53.009Z,1478883953.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:53.401Z,1478883953.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:53.412Z,1478883953.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:53.793Z,1478883953.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:54.197Z,1478883954.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:54.208Z,1478883954.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:54.622Z,1478883954.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:54.624Z,1478883954.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:55.018Z,1478883955.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:55.405Z,1478883955.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:55.420Z,1478883955.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:56.216Z,1478883956.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:56.624Z,1478883956.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:57.420Z,1478883957.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:58.216Z,1478883958.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:58.624Z,1478883958.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:05:59.044Z,1478883959.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:59.053Z,1478883959.053 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T17:00:57.4Z
2016-11-11T17:05:59.053Z,1478883959.053 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T17:05:59.053Z,1478883959.053 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T17:05:59.192Z,1478883959.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:05:59.420Z,1478883959.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:00.050Z,1478883960.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:00.181Z,1478883960.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:00.217Z,1478883960.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:00.566Z,1478883960.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:00.700Z,1478883960.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:00.937Z,1478883960.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:01.496Z,1478883961.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:02.292Z,1478883962.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:03.024Z,1478883963.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:03.820Z,1478883963.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:04.378Z,1478883964.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:04.432Z,1478883964.432 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0284.lzma
2016-11-11T17:06:04.522Z,1478883964.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:04.616Z,1478883964.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:04.878Z,1478883964.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:05.032Z,1478883965.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:05.209Z,1478883965.209 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0284.lzma.bak
2016-11-11T17:06:05.209Z,1478883965.210 [DataOverHttps](INFO): SBD MOMSN=4555596
2016-11-11T17:06:05.286Z,1478883965.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:05.828Z,1478883965.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:06.544Z,1478883966.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:06.801Z,1478883966.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:06.846Z,1478883966.846 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T17:06:06.936Z,1478883966.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:07.340Z,1478883967.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:08.136Z,1478883968.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:08.548Z,1478883968.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:09.344Z,1478883969.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:10.140Z,1478883970.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:10.553Z,1478883970.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:10.564Z,1478883970.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:10.696Z,1478883970.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:11.066Z,1478883971.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:11.360Z,1478883971.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:11.476Z,1478883971.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:11.817Z,1478883971.817 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T17:06:11.863Z,1478883971.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:12.156Z,1478883972.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:12.289Z,1478883972.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:12.564Z,1478883972.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:13.360Z,1478883973.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:14.161Z,1478883974.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:14.645Z,1478883974.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:15.440Z,1478883975.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:15.887Z,1478883975.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:15.951Z,1478883975.951 [DataOverHttps](INFO): Sending 197 bytes from file Logs/20161111T044527/Express0285.lzma
2016-11-11T17:06:16.033Z,1478883976.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:16.236Z,1478883976.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:16.400Z,1478883976.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:16.749Z,1478883976.750 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0285.lzma.bak
2016-11-11T17:06:16.750Z,1478883976.750 [DataOverHttps](INFO): SBD MOMSN=4555598
2016-11-11T17:06:16.827Z,1478883976.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:16.976Z,1478883976.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:17.772Z,1478883977.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:18.037Z,1478883978.037 [NAL9602](INFO): Powering down
2016-11-11T17:06:18.102Z,1478883978.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:18.111Z,1478883978.111 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T17:06:18.111Z,1478883978.111 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T17:06:18.111Z,1478883978.111 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T17:06:18.241Z,1478883978.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:18.568Z,1478883978.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:18.000Z,1478883979.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:19.796Z,1478883979.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:20.520Z,1478883980.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:21.316Z,1478883981.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:21.706Z,1478883981.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:21.841Z,1478883981.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:22.112Z,1478883982.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:22.216Z,1478883982.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:22.520Z,1478883982.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:22.611Z,1478883982.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:23.011Z,1478883983.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:23.316Z,1478883983.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:23.414Z,1478883983.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:23.825Z,1478883983.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:24.112Z,1478883984.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:24.223Z,1478883984.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:24.520Z,1478883984.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:24.620Z,1478883984.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:25.013Z,1478883985.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:25.316Z,1478883985.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:25.414Z,1478883985.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:25.823Z,1478883985.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:26.112Z,1478883986.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:26.222Z,1478883986.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:26.520Z,1478883986.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:26.620Z,1478883986.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:27.023Z,1478883987.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:27.316Z,1478883987.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:27.424Z,1478883987.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:27.820Z,1478883987.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:28.113Z,1478883988.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:28.228Z,1478883988.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:28.620Z,1478883988.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:28.640Z,1478883988.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:29.021Z,1478883989.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:29.412Z,1478883989.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:29.436Z,1478883989.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:29.823Z,1478883989.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:30.211Z,1478883990.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:30.232Z,1478883990.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:30.620Z,1478883990.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:30.952Z,1478883990.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:31.021Z,1478883991.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:31.411Z,1478883991.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:31.748Z,1478883991.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:31.817Z,1478883991.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:32.221Z,1478883992.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:32.544Z,1478883992.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:32.633Z,1478883992.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:32.952Z,1478883992.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:33.021Z,1478883993.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:33.449Z,1478883993.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:33.748Z,1478883993.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:33.845Z,1478883993.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:34.203Z,1478883994.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:34.480Z,1478883994.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:34.646Z,1478883994.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:35.007Z,1478883995.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:35.276Z,1478883995.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:35.441Z,1478883995.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:35.845Z,1478883995.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:36.072Z,1478883996.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:36.216Z,1478883996.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:36.484Z,1478883996.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:36.609Z,1478883996.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:37.015Z,1478883997.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:37.280Z,1478883997.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:37.411Z,1478883997.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:37.817Z,1478883997.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:38.076Z,1478883998.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:38.220Z,1478883998.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:38.484Z,1478883998.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:38.614Z,1478883998.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:39.020Z,1478883999.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:39.280Z,1478883999.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:39.425Z,1478883999.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:39.820Z,1478883999.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:40.076Z,1478884000.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:40.223Z,1478884000.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:40.484Z,1478884000.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:40.618Z,1478884000.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:41.020Z,1478884001.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:41.280Z,1478884001.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:41.421Z,1478884001.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:41.821Z,1478884001.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:42.076Z,1478884002.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:42.242Z,1478884002.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:42.582Z,1478884002.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:42.626Z,1478884002.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:43.017Z,1478884003.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:43.376Z,1478884003.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:43.416Z,1478884003.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:43.821Z,1478884003.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:44.172Z,1478884004.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:44.218Z,1478884004.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:44.625Z,1478884004.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:44.928Z,1478884004.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:45.016Z,1478884005.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:45.422Z,1478884005.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:45.724Z,1478884005.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:45.821Z,1478884005.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:46.225Z,1478884006.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:46.521Z,1478884006.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:46.633Z,1478884006.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:46.928Z,1478884006.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:47.014Z,1478884007.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:47.410Z,1478884007.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:47.724Z,1478884007.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:47.853Z,1478884007.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:48.237Z,1478884008.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:48.472Z,1478884008.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:48.614Z,1478884008.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:49.009Z,1478884009.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:49.268Z,1478884009.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:49.458Z,1478884009.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:49.817Z,1478884009.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:50.064Z,1478884010.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:50.255Z,1478884010.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:50.472Z,1478884010.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:50.660Z,1478884010.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:51.021Z,1478884011.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:51.268Z,1478884011.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:51.413Z,1478884011.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:51.833Z,1478884011.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:52.064Z,1478884012.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:52.217Z,1478884012.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:52.472Z,1478884012.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:52.625Z,1478884012.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:53.004Z,1478884013.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:53.268Z,1478884013.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:53.407Z,1478884013.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:53.809Z,1478884013.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:54.064Z,1478884014.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:54.217Z,1478884014.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:54.472Z,1478884014.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:54.603Z,1478884014.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:55.007Z,1478884015.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:55.268Z,1478884015.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:55.404Z,1478884015.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:55.807Z,1478884015.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:56.064Z,1478884016.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:56.278Z,1478884016.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:56.548Z,1478884016.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:56.608Z,1478884016.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:57.007Z,1478884017.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:57.344Z,1478884017.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:57.409Z,1478884017.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:57.813Z,1478884017.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:58.140Z,1478884018.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:58.209Z,1478884018.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:58.609Z,1478884018.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:58.908Z,1478884018.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:59.005Z,1478884019.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:59.409Z,1478884019.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:06:59.704Z,1478884019.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:06:59.846Z,1478884019.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:00.213Z,1478884020.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:00.500Z,1478884020.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:00.609Z,1478884020.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:00.908Z,1478884020.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:01.009Z,1478884021.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:01.413Z,1478884021.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:01.704Z,1478884021.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:01.813Z,1478884021.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:02.209Z,1478884022.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:02.436Z,1478884022.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:02.629Z,1478884022.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:03.033Z,1478884023.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:03.232Z,1478884023.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:03.417Z,1478884023.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:03.818Z,1478884023.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:04.028Z,1478884024.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:04.245Z,1478884024.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:04.464Z,1478884024.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:04.630Z,1478884024.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:05.030Z,1478884025.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:05.260Z,1478884025.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:05.445Z,1478884025.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:05.821Z,1478884025.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:06.056Z,1478884026.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:06.222Z,1478884026.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:06.464Z,1478884026.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:06.617Z,1478884026.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:07.010Z,1478884027.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:07.260Z,1478884027.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:07.417Z,1478884027.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:07.809Z,1478884027.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:08.056Z,1478884028.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:08.209Z,1478884028.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:08.464Z,1478884028.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:08.659Z,1478884028.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:09.007Z,1478884029.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:09.260Z,1478884029.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:09.407Z,1478884029.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:09.813Z,1478884029.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:10.057Z,1478884030.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:10.217Z,1478884030.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:10.524Z,1478884030.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:10.604Z,1478884030.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:11.013Z,1478884031.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:11.320Z,1478884031.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:11.421Z,1478884031.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:11.817Z,1478884031.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:12.116Z,1478884032.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:12.233Z,1478884032.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:12.617Z,1478884032.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:12.900Z,1478884032.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:13.017Z,1478884033.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:13.438Z,1478884033.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:13.697Z,1478884033.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:13.830Z,1478884033.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:14.225Z,1478884034.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:14.492Z,1478884034.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:14.630Z,1478884034.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:14.920Z,1478884034.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:15.030Z,1478884035.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:15.413Z,1478884035.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:15.716Z,1478884035.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:15.814Z,1478884035.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:16.241Z,1478884036.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:16.436Z,1478884036.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:16.614Z,1478884036.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:17.014Z,1478884037.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:17.232Z,1478884037.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:17.449Z,1478884037.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:17.817Z,1478884037.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:18.028Z,1478884038.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:18.253Z,1478884038.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:18.440Z,1478884038.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:18.633Z,1478884038.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:19.236Z,1478884039.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:20.034Z,1478884040.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:20.464Z,1478884040.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:21.260Z,1478884041.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:22.056Z,1478884042.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:22.464Z,1478884042.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:22.751Z,1478884042.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:22.897Z,1478884042.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:23.260Z,1478884043.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:23.263Z,1478884043.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:23.638Z,1478884043.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:24.057Z,1478884044.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:24.029Z,1478884044.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:24.452Z,1478884044.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:24.552Z,1478884044.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:24.870Z,1478884044.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:25.268Z,1478884045.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:25.348Z,1478884045.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:25.641Z,1478884045.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:26.050Z,1478884046.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:26.144Z,1478884046.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:26.516Z,1478884046.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:26.868Z,1478884046.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:26.940Z,1478884046.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:27.245Z,1478884047.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:27.348Z,1478884047.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:27.638Z,1478884047.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:28.040Z,1478884048.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:28.144Z,1478884048.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:28.515Z,1478884048.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:28.840Z,1478884048.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:28.940Z,1478884048.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:29.254Z,1478884049.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:29.348Z,1478884049.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:29.658Z,1478884049.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:30.064Z,1478884050.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:30.144Z,1478884050.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:30.438Z,1478884050.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:30.552Z,1478884050.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:30.837Z,1478884050.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:31.244Z,1478884051.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:31.348Z,1478884051.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:31.649Z,1478884051.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:32.052Z,1478884052.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:32.144Z,1478884052.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:32.438Z,1478884052.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:32.552Z,1478884052.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:32.830Z,1478884052.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:33.250Z,1478884053.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:33.348Z,1478884053.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:33.622Z,1478884053.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:34.044Z,1478884054.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:34.144Z,1478884054.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:34.421Z,1478884054.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:34.552Z,1478884054.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:34.838Z,1478884054.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:35.286Z,1478884055.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:35.348Z,1478884055.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:35.670Z,1478884055.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:36.058Z,1478884056.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:36.144Z,1478884056.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:36.434Z,1478884056.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:36.556Z,1478884056.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:36.863Z,1478884056.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:37.238Z,1478884057.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:37.353Z,1478884057.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:37.669Z,1478884057.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:38.099Z,1478884058.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:38.148Z,1478884058.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:38.474Z,1478884058.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:38.556Z,1478884058.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:38.835Z,1478884058.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:39.234Z,1478884059.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:39.352Z,1478884059.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:39.625Z,1478884059.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:40.032Z,1478884060.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:40.148Z,1478884060.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:40.485Z,1478884060.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:40.828Z,1478884060.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:40.880Z,1478884060.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:41.217Z,1478884061.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:41.621Z,1478884061.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:41.676Z,1478884061.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:42.016Z,1478884062.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:42.458Z,1478884062.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:42.472Z,1478884062.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:42.829Z,1478884062.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:42.880Z,1478884062.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:43.220Z,1478884063.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:43.624Z,1478884063.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:43.676Z,1478884063.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:44.029Z,1478884064.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:44.368Z,1478884064.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:44.428Z,1478884064.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:44.830Z,1478884064.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:45.164Z,1478884065.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:45.229Z,1478884065.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:45.640Z,1478884065.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:45.960Z,1478884065.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:46.034Z,1478884066.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:46.368Z,1478884066.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:46.446Z,1478884066.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:46.824Z,1478884066.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:47.164Z,1478884067.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:47.233Z,1478884067.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:47.625Z,1478884067.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:47.961Z,1478884067.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:48.040Z,1478884068.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:48.372Z,1478884068.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:48.433Z,1478884068.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:48.836Z,1478884068.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:49.168Z,1478884069.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:49.234Z,1478884069.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:49.631Z,1478884069.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:49.965Z,1478884069.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:50.041Z,1478884070.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:50.387Z,1478884070.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:50.477Z,1478884070.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:50.842Z,1478884070.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:51.184Z,1478884071.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:51.257Z,1478884071.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:51.641Z,1478884071.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:51.980Z,1478884071.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:52.100Z,1478884072.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:52.425Z,1478884072.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:52.488Z,1478884072.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:52.853Z,1478884072.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:53.225Z,1478884073.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:53.284Z,1478884073.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:53.625Z,1478884073.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:54.028Z,1478884074.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:54.080Z,1478884074.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:54.507Z,1478884074.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:54.829Z,1478884074.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:54.860Z,1478884074.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:55.222Z,1478884075.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:55.625Z,1478884075.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:55.656Z,1478884075.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:56.029Z,1478884076.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:56.441Z,1478884076.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:56.456Z,1478884076.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:56.833Z,1478884076.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:56.864Z,1478884076.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:57.234Z,1478884077.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:57.626Z,1478884077.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:57.660Z,1478884077.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:58.046Z,1478884078.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:58.364Z,1478884078.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:58.428Z,1478884078.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:58.826Z,1478884078.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:59.160Z,1478884079.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:07:59.233Z,1478884079.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:59.625Z,1478884079.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:07:59.957Z,1478884079.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:00.046Z,1478884080.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:00.368Z,1478884080.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:00.447Z,1478884080.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:00.845Z,1478884080.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:01.164Z,1478884081.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:01.237Z,1478884081.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:01.632Z,1478884081.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:01.961Z,1478884081.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:02.053Z,1478884082.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:02.372Z,1478884082.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:02.428Z,1478884082.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:02.837Z,1478884082.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:03.168Z,1478884083.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:03.225Z,1478884083.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:03.624Z,1478884083.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:03.964Z,1478884083.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:04.040Z,1478884084.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:04.372Z,1478884084.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:04.441Z,1478884084.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:04.853Z,1478884084.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:05.168Z,1478884085.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:05.242Z,1478884085.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:05.632Z,1478884085.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:05.964Z,1478884085.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:06.069Z,1478884086.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:06.433Z,1478884086.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:06.492Z,1478884086.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:06.870Z,1478884086.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:07.272Z,1478884087.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:07.288Z,1478884087.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:07.629Z,1478884087.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:08.025Z,1478884088.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:08.084Z,1478884088.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:08.442Z,1478884088.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:08.833Z,1478884088.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:08.840Z,1478884088.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:09.242Z,1478884089.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:09.632Z,1478884089.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:09.636Z,1478884089.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:10.043Z,1478884090.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:10.432Z,1478884090.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:10.442Z,1478884090.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:10.824Z,1478884090.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:10.840Z,1478884090.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:11.223Z,1478884091.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:11.633Z,1478884091.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:11.636Z,1478884091.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:12.025Z,1478884092.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:12.324Z,1478884092.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:12.425Z,1478884092.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:12.839Z,1478884092.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:13.120Z,1478884093.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:13.226Z,1478884093.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:13.625Z,1478884093.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:13.916Z,1478884093.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:14.032Z,1478884094.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:14.324Z,1478884094.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:14.426Z,1478884094.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:14.831Z,1478884094.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:15.120Z,1478884095.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:15.233Z,1478884095.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:15.629Z,1478884095.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:15.916Z,1478884095.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:16.037Z,1478884096.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:16.324Z,1478884096.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:16.432Z,1478884096.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:16.826Z,1478884096.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:17.120Z,1478884097.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:17.237Z,1478884097.237 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:17.238Z,1478884097.238 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 226
2016-11-11T17:08:17.238Z,1478884097.238 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:08:17.244Z,1478884097.244 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:17.244Z,1478884097.244 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 226
2016-11-11T17:08:17.244Z,1478884097.244 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:08:17.247Z,1478884097.247 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:17.247Z,1478884097.247 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 226
2016-11-11T17:08:17.247Z,1478884097.247 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:08:17.273Z,1478884097.273 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:08:17.273Z,1478884097.273 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:08:17.273Z,1478884097.273 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:08:17.658Z,1478884097.658 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:08:17.658Z,1478884097.658 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 226
2016-11-11T17:08:17.658Z,1478884097.658 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:08:17.659Z,1478884097.658 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 226
2016-11-11T17:08:17.659Z,1478884097.659 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:08:17.659Z,1478884097.659 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 226
2016-11-11T17:08:17.916Z,1478884097.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:18.044Z,1478884098.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:08:18.044Z,1478884098.044 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:08:18.045Z,1478884098.045 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:08:18.049Z,1478884098.049 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:08:18.050Z,1478884098.050 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:08:18.050Z,1478884098.050 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:08:18.051Z,1478884098.051 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:08:18.051Z,1478884098.051 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:08:18.052Z,1478884098.052 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:08:18.328Z,1478884098.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:18.443Z,1478884098.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:18.833Z,1478884098.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:19.125Z,1478884099.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:19.920Z,1478884099.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:20.424Z,1478884100.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:21.220Z,1478884101.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:22.016Z,1478884102.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:22.497Z,1478884102.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:22.621Z,1478884102.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:22.772Z,1478884102.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:23.022Z,1478884103.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:23.407Z,1478884103.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:23.568Z,1478884103.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:23.825Z,1478884103.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:24.222Z,1478884104.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:24.364Z,1478884104.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:24.627Z,1478884104.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:24.772Z,1478884104.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:24.994Z,1478884104.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:25.405Z,1478884105.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:25.568Z,1478884105.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:25.804Z,1478884105.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:26.213Z,1478884106.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:26.320Z,1478884106.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:26.591Z,1478884106.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:26.994Z,1478884106.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:27.116Z,1478884107.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:27.397Z,1478884107.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:27.792Z,1478884107.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:27.912Z,1478884107.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:28.197Z,1478884108.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:28.320Z,1478884108.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:28.599Z,1478884108.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:29.004Z,1478884109.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:29.116Z,1478884109.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:29.402Z,1478884109.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:29.804Z,1478884109.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:29.912Z,1478884109.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:30.208Z,1478884110.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:30.320Z,1478884110.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:30.608Z,1478884110.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:30.986Z,1478884110.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:31.116Z,1478884111.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:31.418Z,1478884111.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:31.847Z,1478884111.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:31.912Z,1478884111.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:32.201Z,1478884112.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:32.320Z,1478884112.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:32.596Z,1478884112.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:32.997Z,1478884112.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:33.117Z,1478884113.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:33.398Z,1478884113.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:33.804Z,1478884113.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:33.913Z,1478884113.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:34.203Z,1478884114.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:34.384Z,1478884114.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:34.625Z,1478884114.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:35.006Z,1478884115.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:35.180Z,1478884115.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:35.398Z,1478884115.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:35.810Z,1478884115.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:35.976Z,1478884115.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:36.225Z,1478884116.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:36.605Z,1478884116.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:36.764Z,1478884116.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:36.998Z,1478884116.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:37.445Z,1478884117.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:37.560Z,1478884117.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:37.818Z,1478884117.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:38.226Z,1478884118.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:38.356Z,1478884118.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:38.633Z,1478884118.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:38.764Z,1478884118.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:38.996Z,1478884118.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:39.408Z,1478884119.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:39.560Z,1478884119.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:39.835Z,1478884119.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:40.211Z,1478884120.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:40.308Z,1478884120.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:40.615Z,1478884120.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:41.008Z,1478884121.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:41.104Z,1478884121.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:41.420Z,1478884121.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:41.848Z,1478884121.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:41.900Z,1478884121.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:42.215Z,1478884122.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:42.308Z,1478884122.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:42.607Z,1478884122.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:43.028Z,1478884123.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:43.104Z,1478884123.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:43.391Z,1478884123.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:43.818Z,1478884123.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:43.900Z,1478884123.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:44.210Z,1478884124.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:44.308Z,1478884124.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:44.608Z,1478884124.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:45.005Z,1478884125.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:45.104Z,1478884125.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:45.386Z,1478884125.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:45.829Z,1478884125.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:45.900Z,1478884125.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:46.198Z,1478884126.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:46.308Z,1478884126.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:46.605Z,1478884126.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:47.008Z,1478884127.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:47.104Z,1478884127.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:47.403Z,1478884127.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:47.806Z,1478884127.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:47.905Z,1478884127.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:48.205Z,1478884128.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:48.364Z,1478884128.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:48.603Z,1478884128.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:49.029Z,1478884129.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:49.160Z,1478884129.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:49.414Z,1478884129.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:49.786Z,1478884129.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:49.956Z,1478884129.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:50.193Z,1478884130.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:50.641Z,1478884130.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:50.732Z,1478884130.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:51.005Z,1478884131.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:51.421Z,1478884131.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:51.529Z,1478884131.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:51.804Z,1478884131.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:52.238Z,1478884132.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:52.324Z,1478884132.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:52.608Z,1478884132.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:52.748Z,1478884132.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:53.011Z,1478884133.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:53.399Z,1478884133.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:53.544Z,1478884133.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:53.867Z,1478884133.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:54.241Z,1478884134.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:54.288Z,1478884134.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:54.608Z,1478884134.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:54.993Z,1478884134.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:55.084Z,1478884135.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:55.391Z,1478884135.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:55.848Z,1478884135.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:55.880Z,1478884135.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:56.221Z,1478884136.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:56.288Z,1478884136.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:56.602Z,1478884136.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:56.996Z,1478884136.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:57.084Z,1478884137.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:57.421Z,1478884137.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:57.857Z,1478884137.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:57.880Z,1478884137.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:58.221Z,1478884138.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:58.288Z,1478884138.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:58.606Z,1478884138.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:59.022Z,1478884139.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:59.084Z,1478884139.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:59.418Z,1478884139.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:08:59.880Z,1478884139.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:08:59.922Z,1478884139.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:00.221Z,1478884140.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:00.288Z,1478884140.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:00.613Z,1478884140.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:01.020Z,1478884141.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:01.084Z,1478884141.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:01.396Z,1478884141.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:01.803Z,1478884141.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:01.881Z,1478884141.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:02.208Z,1478884142.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:02.340Z,1478884142.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:02.597Z,1478884142.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:03.005Z,1478884143.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:03.136Z,1478884143.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:03.396Z,1478884143.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:03.833Z,1478884143.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:03.932Z,1478884143.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:04.209Z,1478884144.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:04.608Z,1478884144.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:04.728Z,1478884144.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:05.030Z,1478884145.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:05.411Z,1478884145.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:05.524Z,1478884145.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:05.789Z,1478884145.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:06.273Z,1478884146.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:06.320Z,1478884146.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:06.598Z,1478884146.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:06.740Z,1478884146.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:07.037Z,1478884147.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:07.390Z,1478884147.390 [PNI_TCM](ERROR): CRC does not match. Expected:0x33200 got:0x16913
2016-11-11T17:09:07.441Z,1478884147.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:07.536Z,1478884147.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:07.848Z,1478884147.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:08.204Z,1478884148.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:08.268Z,1478884148.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:08.604Z,1478884148.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:09.007Z,1478884149.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:09.064Z,1478884149.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:09.406Z,1478884149.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:09.856Z,1478884149.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:09.860Z,1478884149.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:10.198Z,1478884150.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:10.268Z,1478884150.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:10.584Z,1478884150.584 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T17:09:10.613Z,1478884150.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:11.026Z,1478884151.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:11.064Z,1478884151.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:11.412Z,1478884151.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:11.860Z,1478884151.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:11.951Z,1478884151.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:12.197Z,1478884152.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:12.320Z,1478884152.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:12.605Z,1478884152.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:13.003Z,1478884153.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:13.116Z,1478884153.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:13.413Z,1478884153.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:13.856Z,1478884153.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:13.912Z,1478884153.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:14.212Z,1478884154.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:14.320Z,1478884154.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:14.612Z,1478884154.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:15.021Z,1478884155.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:15.116Z,1478884155.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:15.390Z,1478884155.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:15.813Z,1478884155.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:15.913Z,1478884155.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:16.222Z,1478884156.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:16.340Z,1478884156.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:16.649Z,1478884156.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:17.010Z,1478884157.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:17.136Z,1478884157.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:17.393Z,1478884157.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:17.839Z,1478884157.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:17.932Z,1478884157.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:18.206Z,1478884158.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:18.622Z,1478884158.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:18.704Z,1478884158.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:18.993Z,1478884158.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:19.500Z,1478884159.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:20.296Z,1478884160.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:20.704Z,1478884160.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:21.500Z,1478884161.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:22.228Z,1478884162.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:22.442Z,1478884162.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:22.584Z,1478884162.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:23.002Z,1478884163.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:23.024Z,1478884163.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:23.358Z,1478884163.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:23.809Z,1478884163.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:23.820Z,1478884163.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:24.183Z,1478884164.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:24.228Z,1478884164.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:24.568Z,1478884164.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:24.956Z,1478884164.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:25.024Z,1478884165.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:25.355Z,1478884165.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:25.820Z,1478884165.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:25.830Z,1478884165.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:26.177Z,1478884166.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:26.228Z,1478884166.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:26.555Z,1478884166.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:26.953Z,1478884166.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:27.024Z,1478884167.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:27.352Z,1478884167.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:27.806Z,1478884167.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:27.820Z,1478884167.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:28.174Z,1478884168.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:28.296Z,1478884168.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:28.563Z,1478884168.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:28.965Z,1478884168.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:29.092Z,1478884169.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:29.365Z,1478884169.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:29.775Z,1478884169.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:29.889Z,1478884169.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:30.146Z,1478884170.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:30.316Z,1478884170.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:30.563Z,1478884170.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:30.980Z,1478884170.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:31.112Z,1478884171.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:31.353Z,1478884171.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:31.781Z,1478884171.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:31.908Z,1478884171.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:32.169Z,1478884172.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:32.580Z,1478884172.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:32.680Z,1478884172.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:32.948Z,1478884172.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:33.397Z,1478884173.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:33.476Z,1478884173.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:33.756Z,1478884173.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:34.215Z,1478884174.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:34.272Z,1478884174.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:34.546Z,1478884174.546 [PNI_TCM](ERROR): CRC does not match. Expected:0x18758 got:0x50460
2016-11-11T17:09:34.609Z,1478884174.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:34.696Z,1478884174.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:34.962Z,1478884174.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:35.369Z,1478884175.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:35.492Z,1478884175.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:35.806Z,1478884175.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:36.147Z,1478884176.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:36.260Z,1478884176.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:36.578Z,1478884176.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:36.989Z,1478884176.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:37.056Z,1478884177.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:37.389Z,1478884177.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:37.832Z,1478884177.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:37.852Z,1478884177.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:38.189Z,1478884178.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:38.264Z,1478884178.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:38.580Z,1478884178.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:38.976Z,1478884178.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:39.061Z,1478884179.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:39.341Z,1478884179.341 [PNI_TCM](ERROR): CRC does not match. Expected:0x31170 got:0x59328
2016-11-11T17:09:39.381Z,1478884179.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:39.811Z,1478884179.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:39.856Z,1478884179.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:40.173Z,1478884180.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:40.264Z,1478884180.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:40.573Z,1478884180.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:40.966Z,1478884180.966 [PNI_TCM](ERROR): CRC does not match. Expected:0x21365 got:0x16913
2016-11-11T17:09:40.986Z,1478884180.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:41.060Z,1478884181.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:41.362Z,1478884181.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:41.813Z,1478884181.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:41.856Z,1478884181.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:42.157Z,1478884182.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:42.264Z,1478884182.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:42.567Z,1478884182.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:42.954Z,1478884182.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:43.060Z,1478884183.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:43.362Z,1478884183.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:43.757Z,1478884183.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:43.857Z,1478884183.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:44.170Z,1478884184.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:44.292Z,1478884184.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:44.588Z,1478884184.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:44.977Z,1478884184.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:45.088Z,1478884185.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:45.369Z,1478884185.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:45.765Z,1478884185.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:45.884Z,1478884185.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:46.214Z,1478884186.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:46.563Z,1478884186.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:46.680Z,1478884186.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:46.962Z,1478884186.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:47.088Z,1478884187.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:47.375Z,1478884187.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:47.771Z,1478884187.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:47.884Z,1478884187.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:48.237Z,1478884188.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:48.564Z,1478884188.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:48.664Z,1478884188.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:48.970Z,1478884188.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:49.378Z,1478884189.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:49.460Z,1478884189.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:49.828Z,1478884189.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:50.148Z,1478884190.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:50.244Z,1478884190.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:50.589Z,1478884190.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:50.957Z,1478884190.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:51.040Z,1478884191.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:51.352Z,1478884191.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:51.807Z,1478884191.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:51.836Z,1478884191.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:52.156Z,1478884192.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:52.244Z,1478884192.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:52.591Z,1478884192.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:52.994Z,1478884192.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:53.040Z,1478884193.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:53.367Z,1478884193.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:53.778Z,1478884193.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:53.836Z,1478884193.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:54.163Z,1478884194.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:54.244Z,1478884194.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:54.562Z,1478884194.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:54.957Z,1478884194.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:55.040Z,1478884195.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:55.363Z,1478884195.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:55.786Z,1478884195.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:55.836Z,1478884195.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:56.169Z,1478884196.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:56.244Z,1478884196.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:56.549Z,1478884196.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:56.989Z,1478884196.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:57.040Z,1478884197.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:57.347Z,1478884197.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:57.749Z,1478884197.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:57.836Z,1478884197.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:58.164Z,1478884198.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:58.280Z,1478884198.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:58.554Z,1478884198.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:58.957Z,1478884198.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:59.076Z,1478884199.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:09:59.363Z,1478884199.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:59.754Z,1478884199.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:09:59.872Z,1478884199.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:00.221Z,1478884200.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:00.577Z,1478884200.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:00.636Z,1478884200.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:00.949Z,1478884200.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:01.357Z,1478884201.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:01.432Z,1478884201.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:01.757Z,1478884201.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:02.216Z,1478884202.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:02.228Z,1478884202.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:02.557Z,1478884202.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:02.636Z,1478884202.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:02.984Z,1478884202.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:03.382Z,1478884203.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:03.432Z,1478884203.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:03.797Z,1478884203.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:04.157Z,1478884204.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:04.192Z,1478884204.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:04.555Z,1478884204.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:04.970Z,1478884204.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:04.996Z,1478884204.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:05.373Z,1478884205.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:05.789Z,1478884205.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:05.800Z,1478884205.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:06.205Z,1478884206.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:06.208Z,1478884206.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:06.582Z,1478884206.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:06.993Z,1478884206.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:07.004Z,1478884207.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:07.357Z,1478884207.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:07.777Z,1478884207.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:07.800Z,1478884207.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:08.166Z,1478884208.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:08.208Z,1478884208.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:08.562Z,1478884208.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:08.976Z,1478884208.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:09.028Z,1478884209.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:09.347Z,1478884209.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:09.789Z,1478884209.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:09.824Z,1478884209.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:10.149Z,1478884210.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:10.232Z,1478884210.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:10.547Z,1478884210.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:10.957Z,1478884210.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:11.028Z,1478884211.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:11.357Z,1478884211.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:11.754Z,1478884211.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:11.825Z,1478884211.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:12.162Z,1478884212.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:12.256Z,1478884212.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:12.557Z,1478884212.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:12.956Z,1478884212.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:13.052Z,1478884213.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:13.362Z,1478884213.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:13.757Z,1478884213.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:13.848Z,1478884213.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:14.211Z,1478884214.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:14.557Z,1478884214.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:14.644Z,1478884214.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:14.969Z,1478884214.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:15.052Z,1478884215.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:15.354Z,1478884215.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:15.772Z,1478884215.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:15.848Z,1478884215.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:16.198Z,1478884216.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:16.566Z,1478884216.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:16.645Z,1478884216.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:16.990Z,1478884216.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:17.412Z,1478884217.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:17.425Z,1478884217.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:17.792Z,1478884217.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:18.162Z,1478884218.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:18.172Z,1478884218.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:18.566Z,1478884218.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:18.968Z,1478884218.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:18.985Z,1478884218.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:19.370Z,1478884219.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:19.764Z,1478884219.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:20.172Z,1478884220.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:20.972Z,1478884220.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:21.768Z,1478884221.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:22.176Z,1478884222.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:22.864Z,1478884222.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:22.972Z,1478884222.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:23.008Z,1478884223.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:23.369Z,1478884223.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:23.768Z,1478884223.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:23.782Z,1478884223.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:24.141Z,1478884224.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:24.176Z,1478884224.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:24.541Z,1478884224.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:24.954Z,1478884224.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:24.972Z,1478884224.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:25.344Z,1478884225.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:25.737Z,1478884225.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:25.769Z,1478884225.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:26.149Z,1478884226.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:26.252Z,1478884226.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:26.548Z,1478884226.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:26.948Z,1478884226.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:27.048Z,1478884227.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:27.345Z,1478884227.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:27.729Z,1478884227.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:27.844Z,1478884227.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:28.219Z,1478884228.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:28.549Z,1478884228.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:28.616Z,1478884228.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:28.935Z,1478884228.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:29.334Z,1478884229.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:29.412Z,1478884229.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:29.734Z,1478884229.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:30.198Z,1478884230.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:30.208Z,1478884230.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:30.533Z,1478884230.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:30.616Z,1478884230.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:30.936Z,1478884230.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:31.336Z,1478884231.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:31.412Z,1478884231.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:31.766Z,1478884231.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:32.113Z,1478884232.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:32.153Z,1478884232.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:32.536Z,1478884232.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:32.910Z,1478884232.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:32.953Z,1478884232.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:33.333Z,1478884233.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:33.705Z,1478884233.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:33.773Z,1478884233.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:34.112Z,1478884234.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:34.136Z,1478884234.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:34.586Z,1478884234.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:34.909Z,1478884234.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:34.949Z,1478884234.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:35.340Z,1478884235.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:35.704Z,1478884235.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:35.794Z,1478884235.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:36.112Z,1478884236.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:36.128Z,1478884236.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:36.567Z,1478884236.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:36.908Z,1478884236.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:36.936Z,1478884236.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:37.380Z,1478884237.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:37.705Z,1478884237.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:37.784Z,1478884237.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:38.112Z,1478884238.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:38.141Z,1478884238.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:38.536Z,1478884238.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:38.910Z,1478884238.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:38.945Z,1478884238.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:39.337Z,1478884239.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:39.705Z,1478884239.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:39.813Z,1478884239.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:40.135Z,1478884240.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:40.256Z,1478884240.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:40.535Z,1478884240.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:40.935Z,1478884240.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:41.052Z,1478884241.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:41.334Z,1478884241.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:41.741Z,1478884241.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:41.848Z,1478884241.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:42.178Z,1478884242.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:42.547Z,1478884242.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:42.608Z,1478884242.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:42.943Z,1478884242.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:43.333Z,1478884243.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:43.404Z,1478884243.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:43.733Z,1478884243.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:44.178Z,1478884244.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:44.216Z,1478884244.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:44.544Z,1478884244.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:44.624Z,1478884244.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:44.942Z,1478884244.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:45.337Z,1478884245.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:45.420Z,1478884245.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:45.741Z,1478884245.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:46.080Z,1478884246.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:46.155Z,1478884246.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:46.541Z,1478884246.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:46.876Z,1478884246.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:46.953Z,1478884246.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:47.344Z,1478884247.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:47.672Z,1478884247.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:47.751Z,1478884247.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:48.084Z,1478884248.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:48.142Z,1478884248.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:48.573Z,1478884248.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:48.880Z,1478884248.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:48.936Z,1478884248.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:49.336Z,1478884249.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:49.676Z,1478884249.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:49.776Z,1478884249.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:50.084Z,1478884250.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:50.137Z,1478884250.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:50.579Z,1478884250.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:50.880Z,1478884250.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:50.937Z,1478884250.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:51.389Z,1478884251.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:51.676Z,1478884251.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:51.777Z,1478884251.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:52.084Z,1478884252.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:52.155Z,1478884252.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:52.546Z,1478884252.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:52.880Z,1478884252.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:52.951Z,1478884252.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:53.345Z,1478884253.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:53.676Z,1478884253.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:53.786Z,1478884253.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:54.137Z,1478884254.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:54.236Z,1478884254.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:54.535Z,1478884254.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:54.949Z,1478884254.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:55.032Z,1478884255.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:55.339Z,1478884255.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:55.745Z,1478884255.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:55.828Z,1478884255.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:56.201Z,1478884256.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:56.552Z,1478884256.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:56.616Z,1478884256.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:56.981Z,1478884256.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:57.335Z,1478884257.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:57.412Z,1478884257.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:57.744Z,1478884257.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:58.177Z,1478884258.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:58.208Z,1478884258.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:58.534Z,1478884258.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:58.616Z,1478884258.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:58.943Z,1478884258.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:59.344Z,1478884259.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:10:59.413Z,1478884259.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:10:59.737Z,1478884259.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:00.056Z,1478884260.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:00.137Z,1478884260.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:00.542Z,1478884260.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:00.852Z,1478884260.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:00.980Z,1478884260.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:01.341Z,1478884261.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:01.650Z,1478884261.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:01.745Z,1478884261.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:02.060Z,1478884262.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:02.141Z,1478884262.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:02.536Z,1478884262.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:02.856Z,1478884262.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:02.939Z,1478884262.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:03.341Z,1478884263.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:03.652Z,1478884263.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:03.781Z,1478884263.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:04.060Z,1478884264.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:04.144Z,1478884264.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:04.546Z,1478884264.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:04.856Z,1478884264.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:04.978Z,1478884264.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:05.343Z,1478884265.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:05.652Z,1478884265.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:05.789Z,1478884265.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:06.060Z,1478884266.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:06.163Z,1478884266.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:06.548Z,1478884266.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:06.856Z,1478884266.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:06.949Z,1478884266.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:07.341Z,1478884267.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:07.654Z,1478884267.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:07.824Z,1478884267.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:08.135Z,1478884268.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:08.261Z,1478884268.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:08.536Z,1478884268.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:08.946Z,1478884268.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:09.056Z,1478884269.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:09.347Z,1478884269.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:09.738Z,1478884269.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:09.852Z,1478884269.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:10.165Z,1478884270.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:10.537Z,1478884270.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:10.548Z,1478884270.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:10.942Z,1478884270.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:11.344Z,1478884271.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:11.348Z,1478884271.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:11.741Z,1478884271.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:12.140Z,1478884272.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:12.182Z,1478884272.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:12.539Z,1478884272.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:12.548Z,1478884272.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:12.942Z,1478884272.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:13.333Z,1478884273.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:13.344Z,1478884273.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:13.736Z,1478884273.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:14.036Z,1478884274.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:14.141Z,1478884274.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:14.536Z,1478884274.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:14.832Z,1478884274.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:14.935Z,1478884274.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:15.346Z,1478884275.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:15.628Z,1478884275.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:15.737Z,1478884275.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:16.036Z,1478884276.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:16.141Z,1478884276.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:16.545Z,1478884276.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:16.832Z,1478884276.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:16.938Z,1478884276.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:17.324Z,1478884277.324 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T17:11:17.324Z,1478884277.324 [BPC1] Data Fault, FailCount= 1
2016-11-11T17:11:17.324Z,1478884277.324 [BPC1](ERROR): Data Fault
2016-11-11T17:11:17.345Z,1478884277.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:17.394Z,1478884277.394 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T17:11:17.628Z,1478884277.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:17.753Z,1478884277.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:18.040Z,1478884278.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:18.153Z,1478884278.153 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:18.154Z,1478884278.154 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 227
2016-11-11T17:11:18.154Z,1478884278.154 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:11:18.167Z,1478884278.167 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:18.167Z,1478884278.167 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 227
2016-11-11T17:11:18.167Z,1478884278.167 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:11:18.173Z,1478884278.173 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:18.173Z,1478884278.173 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 227
2016-11-11T17:11:18.173Z,1478884278.173 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:11:18.204Z,1478884278.204 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:11:18.204Z,1478884278.204 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:11:18.205Z,1478884278.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:11:18.544Z,1478884278.544 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T17:11:18.544Z,1478884278.544 [Default:CheckIn:C.Wait] Stopped
2016-11-11T17:11:18.544Z,1478884278.544 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T17:11:18.544Z,1478884278.545 [Default:CheckIn:D] Running Loop=1
2016-11-11T17:11:18.592Z,1478884278.592 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:11:18.592Z,1478884278.592 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 227
2016-11-11T17:11:18.592Z,1478884278.592 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:11:18.593Z,1478884278.593 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 227
2016-11-11T17:11:18.593Z,1478884278.593 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:11:18.593Z,1478884278.593 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 227
2016-11-11T17:11:18.594Z,1478884278.594 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:11:18.594Z,1478884278.594 [BPC1] No Fault, FailCount= 1
2016-11-11T17:11:18.836Z,1478884278.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:19.006Z,1478884279.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:11:19.006Z,1478884279.006 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:11:19.007Z,1478884279.007 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:11:19.011Z,1478884279.011 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:11:19.012Z,1478884279.012 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:11:19.012Z,1478884279.012 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:11:19.013Z,1478884279.013 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:11:19.013Z,1478884279.013 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:11:19.013Z,1478884279.013 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:11:19.016Z,1478884279.016 [Default:CheckIn:D] Stopped
2016-11-11T17:11:19.016Z,1478884279.016 [Default:CheckIn:E] Running Loop=1
2016-11-11T17:11:19.344Z,1478884279.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:19.353Z,1478884279.353 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 741.295117 min 
2016-11-11T17:11:19.353Z,1478884279.353 [Default:CheckIn:E] Stopped
2016-11-11T17:11:19.354Z,1478884279.354 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T17:11:19.354Z,1478884279.354 [Default:CheckIn] Stopped
2016-11-11T17:11:19.354Z,1478884279.354 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T17:11:19.354Z,1478884279.354 [Default:CheckIn](INFO): Running loop #72
2016-11-11T17:11:19.354Z,1478884279.354 [Default:CheckIn] Running Loop=72
2016-11-11T17:11:19.354Z,1478884279.354 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T17:11:19.354Z,1478884279.354 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T17:11:19.632Z,1478884279.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:19.778Z,1478884279.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:20.040Z,1478884280.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:20.836Z,1478884280.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:21.632Z,1478884281.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:22.148Z,1478884282.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:22.944Z,1478884282.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:23.041Z,1478884283.041 [NAL9602](INFO): Powering up
2016-11-11T17:11:23.088Z,1478884283.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:23.217Z,1478884283.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:23.581Z,1478884283.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:23.740Z,1478884283.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:23.961Z,1478884283.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:24.401Z,1478884284.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:24.488Z,1478884284.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:24.785Z,1478884284.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:25.161Z,1478884285.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:25.284Z,1478884285.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:25.573Z,1478884285.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:25.978Z,1478884285.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:26.080Z,1478884286.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:26.368Z,1478884286.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:26.508Z,1478884286.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:26.770Z,1478884286.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:27.172Z,1478884287.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:27.304Z,1478884287.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:27.635Z,1478884287.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:27.977Z,1478884287.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:28.036Z,1478884288.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:28.369Z,1478884288.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:28.771Z,1478884288.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:28.832Z,1478884288.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:29.177Z,1478884289.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:29.628Z,1478884289.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:29.637Z,1478884289.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:29.985Z,1478884289.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:30.036Z,1478884290.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:30.346Z,1478884290.346 [PNI_TCM](ERROR): CRC does not match. Expected:0x33815 got:0x59136
2016-11-11T17:11:30.385Z,1478884290.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:30.781Z,1478884290.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:30.832Z,1478884290.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:31.184Z,1478884291.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:31.616Z,1478884291.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:31.628Z,1478884291.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:32.013Z,1478884292.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:32.064Z,1478884292.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:32.370Z,1478884292.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:32.803Z,1478884292.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:32.860Z,1478884292.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:33.162Z,1478884293.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:33.635Z,1478884293.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:33.656Z,1478884293.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:33.921Z,1478884293.921 [NAL9602](INFO): NAL9602 initialized
2016-11-11T17:11:33.977Z,1478884293.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:34.064Z,1478884294.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:34.394Z,1478884294.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:34.721Z,1478884294.721 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T17:11:34.721Z,1478884294.721 [NAL9602] Data Fault, FailCount= 1
2016-11-11T17:11:34.721Z,1478884294.721 [NAL9602](ERROR): Data Fault
2016-11-11T17:11:34.785Z,1478884294.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:34.830Z,1478884294.830 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T17:11:34.860Z,1478884294.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:35.121Z,1478884295.121 [NAL9602](INFO): Powering down
2016-11-11T17:11:35.148Z,1478884295.148 [PNI_TCM](ERROR): CRC does not match. Expected:0x52820 got:0x16872
2016-11-11T17:11:35.179Z,1478884295.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:35.573Z,1478884295.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:35.656Z,1478884295.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:35.964Z,1478884295.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:36.008Z,1478884296.008 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T17:11:36.008Z,1478884296.008 [NAL9602] No Fault, FailCount= 1
2016-11-11T17:11:36.124Z,1478884296.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:36.369Z,1478884296.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:36.765Z,1478884296.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:36.920Z,1478884296.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:37.181Z,1478884297.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:37.550Z,1478884297.550 [PNI_TCM](ERROR): CRC does not match. Expected:0x48225 got:0x6407
2016-11-11T17:11:37.577Z,1478884297.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:37.716Z,1478884297.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:37.973Z,1478884297.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:38.373Z,1478884298.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:38.488Z,1478884298.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:38.779Z,1478884298.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:39.155Z,1478884299.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:39.284Z,1478884299.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:39.561Z,1478884299.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:39.956Z,1478884299.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:40.080Z,1478884300.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:40.324Z,1478884300.325 [NAL9602](INFO): Powering up NAL9602
2016-11-11T17:11:40.388Z,1478884300.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:40.488Z,1478884300.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:40.753Z,1478884300.753 [PNI_TCM](ERROR): CRC does not match. Expected:0x19541 got:0x59200
2016-11-11T17:11:40.791Z,1478884300.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:41.158Z,1478884301.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:41.284Z,1478884301.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:41.648Z,1478884301.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:41.970Z,1478884301.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:42.024Z,1478884302.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:42.351Z,1478884302.351 [PNI_TCM](ERROR): CRC does not match. Expected:0x43018 got:0x16913
2016-11-11T17:11:42.370Z,1478884302.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:42.768Z,1478884302.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:42.820Z,1478884302.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:43.173Z,1478884303.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:43.616Z,1478884303.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:43.621Z,1478884303.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:43.977Z,1478884303.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:44.366Z,1478884304.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:44.412Z,1478884304.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:44.774Z,1478884304.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:44.868Z,1478884304.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:45.180Z,1478884305.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:45.601Z,1478884305.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:45.664Z,1478884305.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:45.960Z,1478884305.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:46.072Z,1478884306.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:46.421Z,1478884306.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:46.773Z,1478884306.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:46.868Z,1478884306.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:47.165Z,1478884307.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:47.621Z,1478884307.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:47.664Z,1478884307.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:47.970Z,1478884307.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:48.072Z,1478884308.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:48.395Z,1478884308.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:48.800Z,1478884308.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:48.868Z,1478884308.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:49.163Z,1478884309.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:49.562Z,1478884309.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:49.665Z,1478884309.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:49.970Z,1478884309.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:50.104Z,1478884310.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:50.367Z,1478884310.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:50.774Z,1478884310.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:50.900Z,1478884310.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:51.125Z,1478884311.125 [NAL9602](INFO): NAL9602 initialized
2016-11-11T17:11:51.175Z,1478884311.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:51.572Z,1478884311.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:51.697Z,1478884311.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:52.033Z,1478884312.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:52.377Z,1478884312.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:52.484Z,1478884312.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:52.776Z,1478884312.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:53.169Z,1478884313.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:53.280Z,1478884313.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:53.561Z,1478884313.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:53.965Z,1478884313.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:54.076Z,1478884314.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:54.375Z,1478884314.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:54.484Z,1478884314.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:54.778Z,1478884314.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:55.174Z,1478884315.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:55.280Z,1478884315.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:55.586Z,1478884315.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:55.976Z,1478884315.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:56.028Z,1478884316.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:56.377Z,1478884316.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:56.753Z,1478884316.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:56.824Z,1478884316.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:57.162Z,1478884317.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:57.582Z,1478884317.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:57.620Z,1478884317.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:57.971Z,1478884317.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:58.044Z,1478884318.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:58.361Z,1478884318.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:58.765Z,1478884318.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:58.840Z,1478884318.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:59.183Z,1478884319.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:59.616Z,1478884319.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:11:59.636Z,1478884319.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:11:59.981Z,1478884319.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:00.052Z,1478884320.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:00.375Z,1478884320.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:00.802Z,1478884320.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:00.848Z,1478884320.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:01.253Z,1478884321.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:01.596Z,1478884321.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:01.644Z,1478884321.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:02.017Z,1478884322.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:02.064Z,1478884322.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:02.377Z,1478884322.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:02.810Z,1478884322.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:02.860Z,1478884322.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:03.190Z,1478884323.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:03.577Z,1478884323.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:03.656Z,1478884323.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:03.975Z,1478884323.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:04.108Z,1478884324.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:04.387Z,1478884324.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:04.794Z,1478884324.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:04.904Z,1478884324.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:05.178Z,1478884325.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:05.578Z,1478884325.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:05.700Z,1478884325.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:06.010Z,1478884326.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:06.370Z,1478884326.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:06.492Z,1478884326.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:06.784Z,1478884326.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:07.227Z,1478884327.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:07.288Z,1478884327.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:07.586Z,1478884327.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:08.041Z,1478884328.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:08.084Z,1478884328.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:08.384Z,1478884328.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:08.492Z,1478884328.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:08.797Z,1478884328.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:09.163Z,1478884329.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:09.289Z,1478884329.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:09.595Z,1478884329.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:09.989Z,1478884329.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:10.024Z,1478884330.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:10.381Z,1478884330.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:10.790Z,1478884330.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:10.828Z,1478884330.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:11.221Z,1478884331.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:11.586Z,1478884331.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:11.639Z,1478884331.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:11.989Z,1478884331.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:12.068Z,1478884332.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:12.412Z,1478884332.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:12.771Z,1478884332.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:12.864Z,1478884332.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:13.170Z,1478884333.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:13.660Z,1478884333.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:13.669Z,1478884333.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:14.026Z,1478884334.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:14.072Z,1478884334.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:14.393Z,1478884334.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:14.830Z,1478884334.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:14.868Z,1478884334.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:15.182Z,1478884335.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:15.624Z,1478884335.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:15.664Z,1478884335.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:15.965Z,1478884335.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:16.072Z,1478884336.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:16.398Z,1478884336.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:16.822Z,1478884336.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:16.868Z,1478884336.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:17.200Z,1478884337.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:17.648Z,1478884337.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:17.664Z,1478884337.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:17.990Z,1478884337.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:18.104Z,1478884338.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:18.376Z,1478884338.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:18.771Z,1478884338.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:18.900Z,1478884338.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:19.181Z,1478884339.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:19.570Z,1478884339.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:19.696Z,1478884339.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:20.028Z,1478884340.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:20.480Z,1478884340.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:21.276Z,1478884341.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:22.072Z,1478884342.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:22.480Z,1478884342.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:23.276Z,1478884343.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:23.961Z,1478884343.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:24.756Z,1478884344.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:25.552Z,1478884345.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:25.960Z,1478884345.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:26.726Z,1478884346.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:26.756Z,1478884346.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:26.870Z,1478884346.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:27.257Z,1478884347.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:27.552Z,1478884347.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:27.686Z,1478884347.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:27.960Z,1478884347.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:28.046Z,1478884348.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:28.453Z,1478884348.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:28.756Z,1478884348.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:28.909Z,1478884348.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:29.257Z,1478884349.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:29.552Z,1478884349.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:29.665Z,1478884349.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:29.960Z,1478884349.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:30.073Z,1478884350.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:30.477Z,1478884350.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:30.756Z,1478884350.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:30.886Z,1478884350.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:31.247Z,1478884351.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:31.555Z,1478884351.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:31.654Z,1478884351.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:32.047Z,1478884352.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:32.084Z,1478884352.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:32.453Z,1478884352.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:32.841Z,1478884352.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:32.880Z,1478884352.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:33.236Z,1478884353.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:33.637Z,1478884353.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:33.676Z,1478884353.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:34.039Z,1478884354.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:34.380Z,1478884354.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:34.435Z,1478884354.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:34.840Z,1478884354.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:35.176Z,1478884355.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:35.242Z,1478884355.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:35.641Z,1478884355.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:35.972Z,1478884355.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:36.083Z,1478884356.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:36.380Z,1478884356.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:36.429Z,1478884356.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:36.853Z,1478884356.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:37.176Z,1478884357.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:37.251Z,1478884357.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:37.655Z,1478884357.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:37.904Z,1478884357.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:38.039Z,1478884358.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:38.437Z,1478884358.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:38.700Z,1478884358.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:38.832Z,1478884358.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:39.230Z,1478884359.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:39.496Z,1478884359.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:39.637Z,1478884359.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:39.904Z,1478884359.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:40.034Z,1478884360.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:40.441Z,1478884360.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:40.700Z,1478884360.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:40.841Z,1478884360.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:41.234Z,1478884361.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:41.496Z,1478884361.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:41.685Z,1478884361.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:41.904Z,1478884361.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:42.051Z,1478884362.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:42.447Z,1478884362.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:42.700Z,1478884362.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:42.866Z,1478884362.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:43.256Z,1478884363.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:43.496Z,1478884363.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:43.651Z,1478884363.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:43.904Z,1478884363.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:44.058Z,1478884364.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:44.433Z,1478884364.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:44.700Z,1478884364.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:44.865Z,1478884364.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:45.241Z,1478884365.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:45.496Z,1478884365.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:45.681Z,1478884365.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:46.032Z,1478884366.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:46.052Z,1478884366.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:46.437Z,1478884366.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:46.834Z,1478884366.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:46.848Z,1478884366.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:47.250Z,1478884367.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:47.644Z,1478884367.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:47.647Z,1478884367.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:48.048Z,1478884368.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:48.352Z,1478884368.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:48.447Z,1478884368.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:48.845Z,1478884368.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:49.148Z,1478884369.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:49.224Z,1478884369.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:49.630Z,1478884369.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:49.945Z,1478884369.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:50.054Z,1478884370.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:50.352Z,1478884370.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:50.437Z,1478884370.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:50.832Z,1478884370.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:51.150Z,1478884371.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:51.237Z,1478884371.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:51.632Z,1478884371.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:51.880Z,1478884371.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:52.041Z,1478884372.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:52.449Z,1478884372.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:52.676Z,1478884372.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:52.853Z,1478884372.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:53.248Z,1478884373.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:53.475Z,1478884373.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:53.650Z,1478884373.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:53.884Z,1478884373.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:54.046Z,1478884374.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:54.444Z,1478884374.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:54.680Z,1478884374.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:54.844Z,1478884374.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:55.245Z,1478884375.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:55.478Z,1478884375.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:55.649Z,1478884375.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:55.888Z,1478884375.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:56.045Z,1478884376.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:56.469Z,1478884376.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:56.684Z,1478884376.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:56.830Z,1478884376.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:57.265Z,1478884377.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:57.480Z,1478884377.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:57.666Z,1478884377.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:57.888Z,1478884377.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:58.038Z,1478884378.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:58.469Z,1478884378.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:58.684Z,1478884378.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:58.845Z,1478884378.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:59.267Z,1478884379.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:59.480Z,1478884379.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:12:59.638Z,1478884379.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:12:59.964Z,1478884379.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:00.067Z,1478884380.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:00.432Z,1478884380.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:00.760Z,1478884380.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:00.843Z,1478884380.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:01.233Z,1478884381.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:01.558Z,1478884381.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:01.634Z,1478884381.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:02.051Z,1478884382.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:02.336Z,1478884382.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:02.440Z,1478884382.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:02.846Z,1478884382.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:03.132Z,1478884383.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:03.246Z,1478884383.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:03.657Z,1478884383.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:03.928Z,1478884383.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:04.047Z,1478884384.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:04.336Z,1478884384.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:04.440Z,1478884384.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:04.841Z,1478884384.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:05.132Z,1478884385.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:05.240Z,1478884385.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:05.639Z,1478884385.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:05.880Z,1478884385.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:06.041Z,1478884386.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:06.450Z,1478884386.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:06.676Z,1478884386.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:06.847Z,1478884386.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:07.255Z,1478884387.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:07.472Z,1478884387.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:07.654Z,1478884387.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:07.880Z,1478884387.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:08.051Z,1478884388.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:08.460Z,1478884388.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:08.676Z,1478884388.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:08.855Z,1478884388.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:09.235Z,1478884389.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:09.472Z,1478884389.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:09.641Z,1478884389.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:09.880Z,1478884389.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:10.041Z,1478884390.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:10.434Z,1478884390.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:10.676Z,1478884390.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:10.881Z,1478884390.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:11.236Z,1478884391.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:11.472Z,1478884391.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:11.645Z,1478884391.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:11.880Z,1478884391.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:12.069Z,1478884392.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:12.429Z,1478884392.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:12.677Z,1478884392.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:12.837Z,1478884392.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:13.264Z,1478884393.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:13.473Z,1478884393.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:13.643Z,1478884393.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:13.944Z,1478884393.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:14.069Z,1478884394.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:14.468Z,1478884394.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:14.740Z,1478884394.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:14.831Z,1478884394.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:15.232Z,1478884395.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:15.536Z,1478884395.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:15.652Z,1478884395.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:16.039Z,1478884396.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:16.304Z,1478884396.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:16.442Z,1478884396.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:16.843Z,1478884396.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:17.100Z,1478884397.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:17.234Z,1478884397.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:17.645Z,1478884397.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:17.896Z,1478884397.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:18.041Z,1478884398.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:18.304Z,1478884398.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:18.457Z,1478884398.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:18.850Z,1478884398.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:19.100Z,1478884399.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:19.253Z,1478884399.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:19.654Z,1478884399.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:19.836Z,1478884399.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:20.041Z,1478884400.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:20.632Z,1478884400.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:21.440Z,1478884401.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:22.240Z,1478884402.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:22.648Z,1478884402.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:23.444Z,1478884403.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:23.665Z,1478884403.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:23.803Z,1478884403.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:23.860Z,1478884403.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:24.198Z,1478884404.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:24.580Z,1478884404.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:24.656Z,1478884404.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:25.009Z,1478884405.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:25.442Z,1478884405.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:25.452Z,1478884405.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:25.792Z,1478884405.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:25.860Z,1478884405.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:26.197Z,1478884406.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:26.573Z,1478884406.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:26.656Z,1478884406.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:27.024Z,1478884407.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:27.383Z,1478884407.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:27.453Z,1478884407.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:27.813Z,1478884407.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:27.920Z,1478884407.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:28.209Z,1478884408.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:28.593Z,1478884408.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:28.716Z,1478884408.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:28.997Z,1478884408.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:29.386Z,1478884409.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:29.512Z,1478884409.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:29.791Z,1478884409.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:30.162Z,1478884410.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:30.296Z,1478884410.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:30.585Z,1478884410.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:30.972Z,1478884410.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:31.092Z,1478884411.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:31.370Z,1478884411.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:31.771Z,1478884411.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:31.888Z,1478884411.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:32.177Z,1478884412.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:32.300Z,1478884412.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:32.576Z,1478884412.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:32.983Z,1478884412.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:33.096Z,1478884413.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:33.417Z,1478884413.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:33.786Z,1478884413.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:33.868Z,1478884413.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:34.181Z,1478884414.181 [PNI_TCM](ERROR): CRC does not match. Expected:0x1270 got:0x43836
2016-11-11T17:13:34.205Z,1478884414.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:34.594Z,1478884414.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:34.664Z,1478884414.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:34.997Z,1478884414.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:35.424Z,1478884415.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:35.460Z,1478884415.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:35.778Z,1478884415.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:35.868Z,1478884415.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:36.176Z,1478884416.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:36.578Z,1478884416.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:36.664Z,1478884416.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:36.981Z,1478884416.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:37.400Z,1478884417.400 [PNI_TCM](ERROR): CRC does not match. Expected:0x3981 got:0x6591
2016-11-11T17:13:37.449Z,1478884417.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:37.460Z,1478884417.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:37.786Z,1478884417.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:37.876Z,1478884417.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:38.163Z,1478884418.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:38.589Z,1478884418.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:38.672Z,1478884418.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:39.021Z,1478884419.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:39.422Z,1478884419.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:39.468Z,1478884419.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:39.788Z,1478884419.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:39.876Z,1478884419.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:40.221Z,1478884420.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:40.572Z,1478884420.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:40.672Z,1478884420.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:41.002Z,1478884421.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:41.381Z,1478884421.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:41.469Z,1478884421.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:41.813Z,1478884421.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:41.912Z,1478884421.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:42.162Z,1478884422.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:42.594Z,1478884422.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:42.708Z,1478884422.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:42.965Z,1478884422.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:43.385Z,1478884423.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:43.504Z,1478884423.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:43.757Z,1478884423.757 [PNI_TCM](ERROR): CRC does not match. Expected:0x10433 got:0x32768
2016-11-11T17:13:43.842Z,1478884423.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:44.175Z,1478884424.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:44.296Z,1478884424.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:44.574Z,1478884424.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:45.000Z,1478884425.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:45.093Z,1478884425.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:45.389Z,1478884425.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:45.770Z,1478884425.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:45.888Z,1478884425.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:46.181Z,1478884426.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:46.296Z,1478884426.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:46.574Z,1478884426.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:46.983Z,1478884426.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:47.092Z,1478884427.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:47.409Z,1478884427.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:47.785Z,1478884427.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:47.848Z,1478884427.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:48.162Z,1478884428.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:48.569Z,1478884428.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:48.644Z,1478884428.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:48.965Z,1478884428.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:49.421Z,1478884429.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:49.440Z,1478884429.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:49.801Z,1478884429.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:49.848Z,1478884429.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:50.175Z,1478884430.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:50.570Z,1478884430.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:50.644Z,1478884430.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:50.980Z,1478884430.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:51.390Z,1478884431.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:51.440Z,1478884431.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:51.777Z,1478884431.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:51.864Z,1478884431.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:52.177Z,1478884432.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:52.572Z,1478884432.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:52.660Z,1478884432.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:52.970Z,1478884432.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:53.445Z,1478884433.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:53.456Z,1478884433.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:53.774Z,1478884433.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:53.864Z,1478884433.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:54.209Z,1478884434.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:54.596Z,1478884434.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:54.660Z,1478884434.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:54.986Z,1478884434.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:55.452Z,1478884435.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:55.456Z,1478884435.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:55.781Z,1478884435.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:55.928Z,1478884435.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:56.205Z,1478884436.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:56.601Z,1478884436.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:56.724Z,1478884436.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:56.968Z,1478884436.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:57.375Z,1478884437.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:57.520Z,1478884437.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:57.826Z,1478884437.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:58.181Z,1478884438.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:58.288Z,1478884438.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:58.580Z,1478884438.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:58.979Z,1478884438.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:59.084Z,1478884439.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:13:59.381Z,1478884439.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:59.840Z,1478884439.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:13:59.880Z,1478884439.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:00.188Z,1478884440.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:00.288Z,1478884440.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:00.585Z,1478884440.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:00.990Z,1478884440.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:01.084Z,1478884441.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:01.386Z,1478884441.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:01.765Z,1478884441.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:01.848Z,1478884441.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:02.169Z,1478884442.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:02.573Z,1478884442.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:02.644Z,1478884442.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:02.973Z,1478884442.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:03.382Z,1478884443.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:03.440Z,1478884443.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:03.770Z,1478884443.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:03.848Z,1478884443.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:04.178Z,1478884444.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:04.577Z,1478884444.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:04.644Z,1478884444.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:04.991Z,1478884444.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:05.401Z,1478884445.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:05.440Z,1478884445.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:05.790Z,1478884445.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:05.848Z,1478884445.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:06.197Z,1478884446.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:06.567Z,1478884446.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:06.644Z,1478884446.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:06.973Z,1478884446.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:07.423Z,1478884447.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:07.440Z,1478884447.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:07.789Z,1478884447.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:07.848Z,1478884447.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:08.185Z,1478884448.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:08.569Z,1478884448.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:08.644Z,1478884448.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:09.001Z,1478884449.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:09.378Z,1478884449.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:09.440Z,1478884449.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:09.817Z,1478884449.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:09.892Z,1478884449.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:10.189Z,1478884450.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:10.621Z,1478884450.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:10.688Z,1478884450.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:11.022Z,1478884451.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:11.390Z,1478884451.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:11.484Z,1478884451.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:11.825Z,1478884451.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:12.184Z,1478884452.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:12.256Z,1478884452.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:12.589Z,1478884452.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:12.977Z,1478884452.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:13.052Z,1478884453.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:13.368Z,1478884453.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:13.818Z,1478884453.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:13.848Z,1478884453.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:14.173Z,1478884454.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:14.264Z,1478884454.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:14.571Z,1478884454.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:14.978Z,1478884454.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:15.060Z,1478884455.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:15.412Z,1478884455.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:15.784Z,1478884455.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:15.790Z,1478884455.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:16.184Z,1478884456.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:16.580Z,1478884456.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:16.593Z,1478884456.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:16.980Z,1478884456.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:17.376Z,1478884457.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:17.400Z,1478884457.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:17.773Z,1478884457.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:17.796Z,1478884457.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:18.181Z,1478884458.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:18.592Z,1478884458.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:18.594Z,1478884458.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:18.966Z,1478884458.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:19.388Z,1478884459.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:19.399Z,1478884459.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:19.399Z,1478884459.399 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 228
2016-11-11T17:14:19.399Z,1478884459.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:14:19.410Z,1478884459.410 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:19.410Z,1478884459.410 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 228
2016-11-11T17:14:19.410Z,1478884459.410 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:14:19.417Z,1478884459.417 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:19.417Z,1478884459.417 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 228
2016-11-11T17:14:19.417Z,1478884459.417 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:14:19.451Z,1478884459.451 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:14:19.452Z,1478884459.452 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:14:19.452Z,1478884459.452 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:14:19.796Z,1478884459.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:19.811Z,1478884459.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:14:19.811Z,1478884459.811 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 228
2016-11-11T17:14:19.812Z,1478884459.812 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:14:19.812Z,1478884459.812 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 228
2016-11-11T17:14:19.813Z,1478884459.813 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:14:19.813Z,1478884459.813 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 228
2016-11-11T17:14:20.170Z,1478884460.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:14:20.170Z,1478884460.171 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:14:20.171Z,1478884460.171 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:14:20.176Z,1478884460.176 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:14:20.176Z,1478884460.176 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:14:20.177Z,1478884460.177 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:14:20.177Z,1478884460.177 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:14:20.177Z,1478884460.178 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:14:20.178Z,1478884460.178 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:14:20.592Z,1478884460.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:21.388Z,1478884461.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:21.796Z,1478884461.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:22.592Z,1478884462.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:23.390Z,1478884463.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:23.722Z,1478884463.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:23.864Z,1478884463.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:23.885Z,1478884463.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:24.204Z,1478884464.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:24.613Z,1478884464.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:24.660Z,1478884464.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:25.039Z,1478884465.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:25.405Z,1478884465.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:25.456Z,1478884465.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:25.859Z,1478884465.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:26.226Z,1478884466.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:26.236Z,1478884466.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:26.590Z,1478884466.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:26.989Z,1478884466.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:27.032Z,1478884467.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:27.397Z,1478884467.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:27.825Z,1478884467.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:27.829Z,1478884467.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:28.207Z,1478884468.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:28.244Z,1478884468.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:28.610Z,1478884468.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:29.013Z,1478884469.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:29.040Z,1478884469.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:29.422Z,1478884469.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:29.724Z,1478884469.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:29.813Z,1478884469.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:30.197Z,1478884470.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:30.520Z,1478884470.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:30.597Z,1478884470.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:30.997Z,1478884470.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:31.316Z,1478884471.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:31.409Z,1478884471.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:31.724Z,1478884471.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:31.805Z,1478884471.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:32.201Z,1478884472.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:32.520Z,1478884472.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:32.609Z,1478884472.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:33.010Z,1478884473.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:33.316Z,1478884473.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:33.397Z,1478884473.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:33.724Z,1478884473.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:33.819Z,1478884473.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:34.220Z,1478884474.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:34.520Z,1478884474.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:34.621Z,1478884474.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:34.999Z,1478884475.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:35.316Z,1478884475.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:35.421Z,1478884475.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:35.724Z,1478884475.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:35.805Z,1478884475.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:36.197Z,1478884476.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:36.520Z,1478884476.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:36.601Z,1478884476.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:37.053Z,1478884477.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:37.316Z,1478884477.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:37.457Z,1478884477.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:37.809Z,1478884477.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:37.856Z,1478884477.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:38.235Z,1478884478.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:38.593Z,1478884478.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:38.652Z,1478884478.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:39.016Z,1478884479.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:39.435Z,1478884479.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:39.448Z,1478884479.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:39.842Z,1478884479.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:40.224Z,1478884480.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:40.247Z,1478884480.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:40.646Z,1478884480.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:40.999Z,1478884480.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:41.020Z,1478884481.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:41.397Z,1478884481.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:41.816Z,1478884481.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:41.848Z,1478884481.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:42.197Z,1478884482.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:42.240Z,1478884482.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:42.608Z,1478884482.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:42.998Z,1478884482.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:43.036Z,1478884483.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:43.405Z,1478884483.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:43.704Z,1478884483.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:43.810Z,1478884483.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:44.220Z,1478884484.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:44.500Z,1478884484.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:44.619Z,1478884484.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:45.020Z,1478884485.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:45.296Z,1478884485.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:45.399Z,1478884485.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:45.704Z,1478884485.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:45.805Z,1478884485.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:46.196Z,1478884486.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:46.500Z,1478884486.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:46.603Z,1478884486.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:47.006Z,1478884487.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:47.296Z,1478884487.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:47.405Z,1478884487.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:47.704Z,1478884487.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:47.798Z,1478884487.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:48.209Z,1478884488.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:48.500Z,1478884488.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:48.605Z,1478884488.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:48.998Z,1478884488.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:49.296Z,1478884489.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:49.411Z,1478884489.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:49.704Z,1478884489.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:49.813Z,1478884489.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:50.216Z,1478884490.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:50.500Z,1478884490.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:50.610Z,1478884490.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:51.010Z,1478884491.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:51.296Z,1478884491.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:51.425Z,1478884491.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:51.797Z,1478884491.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:51.852Z,1478884491.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:52.189Z,1478884492.189 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T17:14:52.189Z,1478884492.189 [BPC1] Data Fault, FailCount= 1
2016-11-11T17:14:52.189Z,1478884492.189 [BPC1](ERROR): Data Fault
2016-11-11T17:14:52.237Z,1478884492.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:52.273Z,1478884492.273 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T17:14:52.608Z,1478884492.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:52.648Z,1478884492.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:52.996Z,1478884492.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:53.404Z,1478884493.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:53.444Z,1478884493.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:53.445Z,1478884493.445 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:14:53.445Z,1478884493.445 [BPC1] No Fault, FailCount= 1
2016-11-11T17:14:53.886Z,1478884493.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:54.166Z,1478884494.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:54.241Z,1478884494.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:54.617Z,1478884494.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:54.960Z,1478884494.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:55.019Z,1478884495.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:55.412Z,1478884495.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:55.756Z,1478884495.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:55.826Z,1478884495.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:56.164Z,1478884496.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:56.221Z,1478884496.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:56.609Z,1478884496.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:56.960Z,1478884496.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:57.009Z,1478884497.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:57.401Z,1478884497.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:57.684Z,1478884497.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:57.798Z,1478884497.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:58.208Z,1478884498.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:58.481Z,1478884498.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:58.604Z,1478884498.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:59.004Z,1478884499.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:59.276Z,1478884499.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:59.405Z,1478884499.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:14:59.684Z,1478884499.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:14:59.822Z,1478884499.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:00.211Z,1478884500.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:00.480Z,1478884500.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:00.620Z,1478884500.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:01.023Z,1478884501.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:01.276Z,1478884501.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:01.402Z,1478884501.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:01.684Z,1478884501.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:01.802Z,1478884501.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:02.197Z,1478884502.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:02.480Z,1478884502.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:02.596Z,1478884502.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:03.005Z,1478884503.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:03.276Z,1478884503.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:03.405Z,1478884503.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:03.688Z,1478884503.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:03.802Z,1478884503.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:04.199Z,1478884504.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:04.484Z,1478884504.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:04.601Z,1478884504.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:05.017Z,1478884505.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:05.280Z,1478884505.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:05.431Z,1478884505.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:05.796Z,1478884505.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:05.818Z,1478884505.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:06.216Z,1478884506.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:06.604Z,1478884506.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:06.645Z,1478884506.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:07.001Z,1478884507.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:07.400Z,1478884507.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:07.434Z,1478884507.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:07.796Z,1478884507.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:08.132Z,1478884508.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:08.229Z,1478884508.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:08.636Z,1478884508.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:08.928Z,1478884508.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:09.007Z,1478884509.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:09.398Z,1478884509.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:09.725Z,1478884509.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:09.801Z,1478884509.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:10.132Z,1478884510.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:10.217Z,1478884510.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:10.617Z,1478884510.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:10.928Z,1478884510.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:11.010Z,1478884511.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:11.413Z,1478884511.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:11.660Z,1478884511.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:11.808Z,1478884511.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:12.208Z,1478884512.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:12.456Z,1478884512.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:12.609Z,1478884512.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:13.007Z,1478884513.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:13.252Z,1478884513.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:13.409Z,1478884513.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:13.672Z,1478884513.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:13.817Z,1478884513.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:14.209Z,1478884514.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:14.468Z,1478884514.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:14.597Z,1478884514.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:14.994Z,1478884514.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:15.264Z,1478884515.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:15.427Z,1478884515.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:15.672Z,1478884515.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:15.799Z,1478884515.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:16.209Z,1478884516.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:16.468Z,1478884516.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:16.616Z,1478884516.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:16.993Z,1478884516.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:17.264Z,1478884517.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:17.425Z,1478884517.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:17.672Z,1478884517.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:17.797Z,1478884517.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:18.196Z,1478884518.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:18.468Z,1478884518.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:18.601Z,1478884518.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:19.005Z,1478884519.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:19.264Z,1478884519.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:19.434Z,1478884519.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:19.768Z,1478884519.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:19.815Z,1478884519.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:20.190Z,1478884520.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:20.564Z,1478884520.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:21.360Z,1478884521.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:22.120Z,1478884522.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:22.916Z,1478884522.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:23.698Z,1478884523.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:23.712Z,1478884523.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:23.841Z,1478884523.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:24.128Z,1478884524.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:24.260Z,1478884524.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:24.634Z,1478884524.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:24.924Z,1478884524.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:25.061Z,1478884525.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:25.463Z,1478884525.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:25.640Z,1478884525.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:25.821Z,1478884525.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:26.230Z,1478884526.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:26.436Z,1478884526.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:26.629Z,1478884526.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:27.032Z,1478884527.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:27.232Z,1478884527.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:27.425Z,1478884527.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:27.640Z,1478884527.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:27.826Z,1478884527.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:28.237Z,1478884528.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:28.436Z,1478884528.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:28.639Z,1478884528.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:29.022Z,1478884529.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:29.232Z,1478884529.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:29.493Z,1478884529.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:29.640Z,1478884529.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:29.819Z,1478884529.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:30.214Z,1478884530.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:30.436Z,1478884530.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:30.623Z,1478884530.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:31.026Z,1478884531.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:31.232Z,1478884531.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:31.424Z,1478884531.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:31.640Z,1478884531.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:31.824Z,1478884531.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:32.218Z,1478884532.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:32.436Z,1478884532.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:32.637Z,1478884532.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:33.024Z,1478884533.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:33.232Z,1478884533.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:33.424Z,1478884533.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:33.732Z,1478884533.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:33.841Z,1478884533.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:34.250Z,1478884534.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:34.528Z,1478884534.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:34.651Z,1478884534.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:35.022Z,1478884535.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:35.324Z,1478884535.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:35.441Z,1478884535.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:35.817Z,1478884535.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:36.088Z,1478884536.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:36.225Z,1478884536.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:36.625Z,1478884536.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:36.884Z,1478884536.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:37.022Z,1478884537.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:37.489Z,1478884537.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:37.681Z,1478884537.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:37.818Z,1478884537.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:38.104Z,1478884538.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:38.249Z,1478884538.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:38.619Z,1478884538.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:38.900Z,1478884538.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:39.061Z,1478884539.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:39.458Z,1478884539.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:39.616Z,1478884539.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:39.840Z,1478884539.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:40.235Z,1478884540.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:40.412Z,1478884540.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:40.626Z,1478884540.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:41.022Z,1478884541.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:41.209Z,1478884541.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:41.426Z,1478884541.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:41.616Z,1478884541.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:41.818Z,1478884541.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:42.225Z,1478884542.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:42.412Z,1478884542.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:42.619Z,1478884542.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:43.019Z,1478884543.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:43.208Z,1478884543.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:43.431Z,1478884543.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:43.616Z,1478884543.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:43.825Z,1478884543.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:44.239Z,1478884544.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:44.412Z,1478884544.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:44.635Z,1478884544.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:45.035Z,1478884545.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:45.209Z,1478884545.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:45.436Z,1478884545.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:45.620Z,1478884545.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:45.835Z,1478884545.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:46.269Z,1478884546.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:46.416Z,1478884546.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:46.641Z,1478884546.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:47.013Z,1478884547.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:47.212Z,1478884547.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:47.421Z,1478884547.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:47.708Z,1478884547.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:47.818Z,1478884547.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:48.224Z,1478884548.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:48.504Z,1478884548.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:48.620Z,1478884548.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:49.026Z,1478884549.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:49.300Z,1478884549.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:49.441Z,1478884549.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:49.827Z,1478884549.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:50.068Z,1478884550.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:50.241Z,1478884550.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:50.640Z,1478884550.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:50.866Z,1478884550.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:51.045Z,1478884551.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:51.465Z,1478884551.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:51.660Z,1478884551.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:51.883Z,1478884551.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:52.068Z,1478884552.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:52.221Z,1478884552.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:52.649Z,1478884552.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:52.864Z,1478884552.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:53.014Z,1478884553.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:53.453Z,1478884553.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:53.600Z,1478884553.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:53.853Z,1478884553.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:54.222Z,1478884554.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:54.396Z,1478884554.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:54.637Z,1478884554.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:55.036Z,1478884555.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:55.192Z,1478884555.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:55.439Z,1478884555.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:55.600Z,1478884555.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:55.835Z,1478884555.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:56.230Z,1478884556.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:56.396Z,1478884556.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:56.629Z,1478884556.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:57.031Z,1478884557.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:57.192Z,1478884557.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:57.432Z,1478884557.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:57.600Z,1478884557.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:57.830Z,1478884557.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:58.231Z,1478884558.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:58.396Z,1478884558.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:58.630Z,1478884558.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:59.030Z,1478884559.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:59.192Z,1478884559.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:59.431Z,1478884559.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:15:59.600Z,1478884559.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:15:59.838Z,1478884559.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:00.235Z,1478884560.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:00.396Z,1478884560.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:00.635Z,1478884560.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:01.032Z,1478884561.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:01.192Z,1478884561.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:01.432Z,1478884561.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:01.688Z,1478884561.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:01.831Z,1478884561.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:02.240Z,1478884562.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:02.484Z,1478884562.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:02.679Z,1478884562.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:03.021Z,1478884563.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:03.280Z,1478884563.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:03.416Z,1478884563.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:03.825Z,1478884563.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:04.048Z,1478884564.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:04.225Z,1478884564.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:04.617Z,1478884564.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:04.846Z,1478884564.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:05.036Z,1478884565.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:05.441Z,1478884565.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:05.640Z,1478884565.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:05.905Z,1478884565.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:06.048Z,1478884566.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:06.275Z,1478884566.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:06.617Z,1478884566.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:06.844Z,1478884566.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:07.058Z,1478884567.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:07.093Z,1478884567.093 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T17:16:07.424Z,1478884567.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:07.592Z,1478884567.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:07.885Z,1478884567.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:08.265Z,1478884568.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:08.388Z,1478884568.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:08.625Z,1478884568.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:09.033Z,1478884569.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:09.184Z,1478884569.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:09.431Z,1478884569.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:09.592Z,1478884569.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:09.822Z,1478884569.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:10.233Z,1478884570.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:10.388Z,1478884570.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:10.632Z,1478884570.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:11.040Z,1478884571.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:11.184Z,1478884571.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:11.426Z,1478884571.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:11.593Z,1478884571.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:11.820Z,1478884571.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:12.225Z,1478884572.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:12.388Z,1478884572.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:12.629Z,1478884572.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:13.018Z,1478884573.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:13.185Z,1478884573.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:13.431Z,1478884573.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:13.596Z,1478884573.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:13.817Z,1478884573.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:14.223Z,1478884574.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:14.394Z,1478884574.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:14.617Z,1478884574.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:15.021Z,1478884575.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:15.188Z,1478884575.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:15.436Z,1478884575.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:15.668Z,1478884575.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:15.838Z,1478884575.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:16.240Z,1478884576.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:16.464Z,1478884576.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:16.640Z,1478884576.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:17.030Z,1478884577.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:17.262Z,1478884577.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:17.435Z,1478884577.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:17.835Z,1478884577.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:18.028Z,1478884578.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:18.237Z,1478884578.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:18.614Z,1478884578.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:18.824Z,1478884578.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:19.015Z,1478884579.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:19.466Z,1478884579.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:19.477Z,1478884579.477 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T17:11:19.4Z
2016-11-11T17:16:19.477Z,1478884579.477 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T17:16:19.477Z,1478884579.477 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T17:16:19.620Z,1478884579.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:19.834Z,1478884579.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:20.028Z,1478884580.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:20.785Z,1478884580.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:20.824Z,1478884580.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:21.564Z,1478884581.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:22.360Z,1478884582.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:23.156Z,1478884583.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:23.564Z,1478884583.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:24.061Z,1478884584.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:24.122Z,1478884584.122 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0288.lzma
2016-11-11T17:16:24.217Z,1478884584.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:24.360Z,1478884584.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:24.577Z,1478884584.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:24.925Z,1478884584.925 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0288.lzma.bak
2016-11-11T17:16:24.925Z,1478884584.925 [DataOverHttps](INFO): SBD MOMSN=4555602
2016-11-11T17:16:25.018Z,1478884585.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:25.156Z,1478884585.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:25.564Z,1478884585.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:26.360Z,1478884586.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:26.379Z,1478884586.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:26.545Z,1478884586.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:27.157Z,1478884587.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:27.568Z,1478884587.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:28.364Z,1478884588.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:29.160Z,1478884589.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:29.664Z,1478884589.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:29.932Z,1478884589.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:30.075Z,1478884590.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:30.415Z,1478884590.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:30.460Z,1478884590.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:30.817Z,1478884590.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:31.213Z,1478884591.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:31.256Z,1478884591.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:31.638Z,1478884591.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:32.052Z,1478884592.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:32.460Z,1478884592.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:33.256Z,1478884593.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:34.016Z,1478884594.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:34.812Z,1478884594.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:34.974Z,1478884594.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:35.055Z,1478884595.055 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0289.lzma
2016-11-11T17:16:35.178Z,1478884595.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:35.529Z,1478884595.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:35.572Z,1478884595.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:35.845Z,1478884595.845 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0289.lzma.bak
2016-11-11T17:16:35.845Z,1478884595.845 [DataOverHttps](INFO): SBD MOMSN=4555604
2016-11-11T17:16:35.913Z,1478884595.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:36.369Z,1478884596.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:37.164Z,1478884597.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:37.265Z,1478884597.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:37.299Z,1478884597.299 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T17:16:37.303Z,1478884597.303 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T17:16:37.303Z,1478884597.303 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T17:16:37.413Z,1478884597.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:37.576Z,1478884597.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:38.372Z,1478884598.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:39.168Z,1478884599.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:39.576Z,1478884599.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:40.372Z,1478884600.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:40.856Z,1478884600.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:40.982Z,1478884600.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:41.168Z,1478884601.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:41.371Z,1478884601.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:41.576Z,1478884601.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:41.813Z,1478884601.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:42.178Z,1478884602.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:42.372Z,1478884602.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:42.553Z,1478884602.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:42.949Z,1478884602.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:43.169Z,1478884603.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:43.391Z,1478884603.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:43.612Z,1478884603.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:43.754Z,1478884603.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:44.190Z,1478884604.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:44.408Z,1478884604.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:44.590Z,1478884604.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:44.961Z,1478884604.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:45.204Z,1478884605.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:45.356Z,1478884605.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:45.769Z,1478884605.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:45.972Z,1478884605.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:46.169Z,1478884606.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:46.563Z,1478884606.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:46.768Z,1478884606.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:46.969Z,1478884606.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:47.361Z,1478884607.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:47.565Z,1478884607.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:47.741Z,1478884607.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:47.972Z,1478884607.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:48.149Z,1478884608.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:48.548Z,1478884608.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:48.768Z,1478884608.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:48.948Z,1478884608.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:49.348Z,1478884609.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:49.500Z,1478884609.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:49.752Z,1478884609.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:50.149Z,1478884610.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:50.296Z,1478884610.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:50.555Z,1478884610.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:50.962Z,1478884610.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:51.093Z,1478884611.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:51.382Z,1478884611.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:51.504Z,1478884611.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:51.776Z,1478884611.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:52.157Z,1478884612.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:52.300Z,1478884612.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:52.553Z,1478884612.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:52.954Z,1478884612.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:53.096Z,1478884613.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:53.364Z,1478884613.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:53.504Z,1478884613.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:53.768Z,1478884613.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:54.161Z,1478884614.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:54.302Z,1478884614.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:54.516Z,1478884614.516 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T17:16:54.571Z,1478884614.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:54.967Z,1478884614.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:55.096Z,1478884615.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:55.349Z,1478884615.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:55.516Z,1478884615.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:55.748Z,1478884615.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:56.147Z,1478884616.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:56.312Z,1478884616.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:56.610Z,1478884616.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:56.955Z,1478884616.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:57.108Z,1478884617.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:57.353Z,1478884617.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:57.596Z,1478884617.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:57.796Z,1478884617.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:58.149Z,1478884618.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:58.392Z,1478884618.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:58.586Z,1478884618.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:58.977Z,1478884618.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:59.188Z,1478884619.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:16:59.349Z,1478884619.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:59.741Z,1478884619.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:16:59.952Z,1478884619.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:00.112Z,1478884620.112 [NAL9602](INFO): Powering down
2016-11-11T17:17:00.147Z,1478884620.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:00.545Z,1478884620.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:00.748Z,1478884620.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:00.949Z,1478884620.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:01.374Z,1478884621.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:01.544Z,1478884621.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:01.743Z,1478884621.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:02.156Z,1478884622.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:02.340Z,1478884622.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:02.550Z,1478884622.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:02.965Z,1478884622.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:03.136Z,1478884623.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:03.339Z,1478884623.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:03.744Z,1478884623.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:03.932Z,1478884623.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:04.145Z,1478884624.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:04.543Z,1478884624.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:04.728Z,1478884624.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:04.944Z,1478884624.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:05.343Z,1478884625.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:05.524Z,1478884625.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:05.765Z,1478884625.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:06.149Z,1478884626.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:06.320Z,1478884626.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:06.553Z,1478884626.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:06.949Z,1478884626.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:07.116Z,1478884627.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:07.349Z,1478884627.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:07.745Z,1478884627.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:07.912Z,1478884627.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:08.144Z,1478884628.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:08.553Z,1478884628.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:08.708Z,1478884628.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:08.945Z,1478884628.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:09.362Z,1478884629.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:09.504Z,1478884629.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:09.744Z,1478884629.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:10.145Z,1478884630.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:10.300Z,1478884630.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:10.549Z,1478884630.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:10.969Z,1478884630.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:11.096Z,1478884631.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:11.358Z,1478884631.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:11.744Z,1478884631.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:11.892Z,1478884631.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:12.173Z,1478884632.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:12.549Z,1478884632.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:12.688Z,1478884632.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:12.966Z,1478884632.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:13.369Z,1478884633.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:13.485Z,1478884633.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:13.754Z,1478884633.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:14.143Z,1478884634.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:14.280Z,1478884634.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:14.544Z,1478884634.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:14.949Z,1478884634.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:15.076Z,1478884635.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:15.344Z,1478884635.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:15.742Z,1478884635.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:15.872Z,1478884635.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:16.155Z,1478884636.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:16.545Z,1478884636.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:16.668Z,1478884636.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:16.953Z,1478884636.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:17.076Z,1478884637.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:17.362Z,1478884637.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:17.484Z,1478884637.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:17.761Z,1478884637.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:17.892Z,1478884637.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:18.165Z,1478884638.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:18.300Z,1478884638.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:18.550Z,1478884638.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:18.708Z,1478884638.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:18.961Z,1478884638.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:19.116Z,1478884639.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:19.357Z,1478884639.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:19.524Z,1478884639.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:19.770Z,1478884639.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:19.932Z,1478884639.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:20.157Z,1478884640.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:20.340Z,1478884640.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:20.562Z,1478884640.562 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:20.562Z,1478884640.562 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 229
2016-11-11T17:17:20.562Z,1478884640.562 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:17:20.593Z,1478884640.593 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:20.593Z,1478884640.593 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 229
2016-11-11T17:17:20.593Z,1478884640.593 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:17:20.604Z,1478884640.604 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:20.604Z,1478884640.604 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 229
2016-11-11T17:17:20.604Z,1478884640.604 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:17:20.658Z,1478884640.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:17:20.659Z,1478884640.659 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:17:20.667Z,1478884640.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:17:20.748Z,1478884640.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:21.062Z,1478884641.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:17:21.062Z,1478884641.062 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 229
2016-11-11T17:17:21.063Z,1478884641.063 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:17:21.063Z,1478884641.063 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 229
2016-11-11T17:17:21.064Z,1478884641.064 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:17:21.064Z,1478884641.064 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 229
2016-11-11T17:17:21.352Z,1478884641.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:17:21.353Z,1478884641.353 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:17:21.353Z,1478884641.353 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:17:21.361Z,1478884641.362 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:17:21.362Z,1478884641.362 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:17:21.362Z,1478884641.362 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:17:21.363Z,1478884641.363 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:17:21.363Z,1478884641.363 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:17:21.364Z,1478884641.364 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:17:21.504Z,1478884641.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:21.758Z,1478884641.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:22.170Z,1478884642.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:22.300Z,1478884642.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:22.565Z,1478884642.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:22.962Z,1478884642.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:23.096Z,1478884643.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:23.342Z,1478884643.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:23.504Z,1478884643.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:23.761Z,1478884643.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:24.153Z,1478884644.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:24.300Z,1478884644.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:24.574Z,1478884644.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:24.949Z,1478884644.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:25.097Z,1478884645.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:25.401Z,1478884645.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:25.568Z,1478884645.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:25.797Z,1478884645.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:26.153Z,1478884646.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:26.364Z,1478884646.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:26.585Z,1478884646.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:26.954Z,1478884646.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:27.160Z,1478884647.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:27.391Z,1478884647.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:27.802Z,1478884647.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:27.928Z,1478884647.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:28.175Z,1478884648.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:28.571Z,1478884648.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:28.724Z,1478884648.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:28.949Z,1478884648.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:29.349Z,1478884649.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:29.520Z,1478884649.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:29.746Z,1478884649.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:29.928Z,1478884649.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:30.201Z,1478884650.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:30.562Z,1478884650.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:30.724Z,1478884650.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:31.016Z,1478884651.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:31.363Z,1478884651.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:31.492Z,1478884651.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:31.757Z,1478884651.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:32.161Z,1478884652.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:32.288Z,1478884652.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:32.575Z,1478884652.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:33.036Z,1478884653.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:33.084Z,1478884653.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:33.410Z,1478884653.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:33.496Z,1478884653.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:33.758Z,1478884653.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:34.163Z,1478884654.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:34.292Z,1478884654.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:34.570Z,1478884654.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:35.023Z,1478884655.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:35.088Z,1478884655.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:35.373Z,1478884655.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:35.496Z,1478884655.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:35.783Z,1478884655.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:36.161Z,1478884656.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:36.292Z,1478884656.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:36.564Z,1478884656.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:37.011Z,1478884657.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:37.088Z,1478884657.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:37.359Z,1478884657.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:37.508Z,1478884657.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:37.762Z,1478884657.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:38.304Z,1478884658.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:39.101Z,1478884659.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:39.548Z,1478884659.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:40.344Z,1478884660.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:41.140Z,1478884661.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:41.920Z,1478884661.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:42.716Z,1478884662.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:43.512Z,1478884663.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:43.920Z,1478884663.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:44.716Z,1478884664.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:44.719Z,1478884664.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:44.873Z,1478884664.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:45.235Z,1478884665.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:45.408Z,1478884665.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:45.669Z,1478884665.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:46.054Z,1478884666.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:46.204Z,1478884666.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:46.488Z,1478884666.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:46.845Z,1478884666.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:47.000Z,1478884667.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:47.262Z,1478884667.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:47.424Z,1478884667.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:47.670Z,1478884667.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:48.062Z,1478884668.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:48.220Z,1478884668.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:48.441Z,1478884668.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:48.835Z,1478884668.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:49.016Z,1478884669.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:49.249Z,1478884669.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:49.424Z,1478884669.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:49.635Z,1478884669.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:50.039Z,1478884670.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:50.220Z,1478884670.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:50.434Z,1478884670.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:50.835Z,1478884670.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:51.016Z,1478884671.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:51.243Z,1478884671.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:51.424Z,1478884671.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:51.641Z,1478884671.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:52.036Z,1478884672.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:52.220Z,1478884672.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:52.433Z,1478884672.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:52.837Z,1478884672.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:53.016Z,1478884673.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:53.257Z,1478884673.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:53.492Z,1478884673.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:53.657Z,1478884673.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:54.037Z,1478884674.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:54.288Z,1478884674.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:54.436Z,1478884674.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:54.834Z,1478884674.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:55.084Z,1478884675.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:55.239Z,1478884675.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:55.640Z,1478884675.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:55.852Z,1478884675.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:56.047Z,1478884676.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:56.458Z,1478884676.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:56.650Z,1478884676.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:56.849Z,1478884676.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:57.233Z,1478884677.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:57.444Z,1478884677.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:57.634Z,1478884677.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:57.876Z,1478884677.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:58.038Z,1478884678.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:58.433Z,1478884678.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:58.672Z,1478884678.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:58.832Z,1478884678.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:59.228Z,1478884679.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:17:59.468Z,1478884679.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:17:59.654Z,1478884679.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:00.046Z,1478884680.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:00.264Z,1478884680.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:00.432Z,1478884680.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:00.875Z,1478884680.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:01.060Z,1478884681.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:01.261Z,1478884681.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:01.637Z,1478884681.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:01.856Z,1478884681.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:02.050Z,1478884682.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:02.454Z,1478884682.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:02.652Z,1478884682.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:02.837Z,1478884682.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:03.231Z,1478884683.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:03.454Z,1478884683.454 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:03.633Z,1478884683.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:04.032Z,1478884684.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:04.252Z,1478884684.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:04.428Z,1478884684.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:04.831Z,1478884684.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:05.050Z,1478884685.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:05.261Z,1478884685.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:05.631Z,1478884685.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:05.844Z,1478884685.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:06.037Z,1478884686.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:06.432Z,1478884686.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:06.640Z,1478884686.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:06.831Z,1478884686.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:07.228Z,1478884687.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:07.436Z,1478884687.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:07.637Z,1478884687.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:08.027Z,1478884688.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:08.232Z,1478884688.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:08.431Z,1478884688.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:08.828Z,1478884688.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:09.028Z,1478884689.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:09.237Z,1478884689.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:09.665Z,1478884689.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:09.824Z,1478884689.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:10.037Z,1478884690.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:10.437Z,1478884690.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:10.620Z,1478884690.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:10.833Z,1478884690.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:11.237Z,1478884691.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:11.417Z,1478884691.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:11.628Z,1478884691.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:12.032Z,1478884692.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:12.212Z,1478884692.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:12.433Z,1478884692.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:12.832Z,1478884692.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:13.008Z,1478884693.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:13.233Z,1478884693.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:13.645Z,1478884693.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:13.804Z,1478884693.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:14.037Z,1478884694.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:14.431Z,1478884694.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:14.600Z,1478884694.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:14.857Z,1478884694.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:15.231Z,1478884695.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:15.396Z,1478884695.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:15.637Z,1478884695.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:16.032Z,1478884696.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:16.192Z,1478884696.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:16.431Z,1478884696.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:16.837Z,1478884696.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:16.988Z,1478884696.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:17.233Z,1478884697.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:17.625Z,1478884697.625 [BPC1](ERROR): Failed to receive battery data
2016-11-11T17:18:17.625Z,1478884697.625 [BPC1] Communications Fault, FailCount= 1
2016-11-11T17:18:17.625Z,1478884697.625 [BPC1](ERROR): Communications Fault
2016-11-11T17:18:17.633Z,1478884697.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:17.652Z,1478884697.652 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T17:18:17.784Z,1478884697.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:18.037Z,1478884698.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:18.428Z,1478884698.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:18.580Z,1478884698.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:18.831Z,1478884698.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:18.850Z,1478884698.850 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:18:18.850Z,1478884698.851 [BPC1] No Fault, FailCount= 1
2016-11-11T17:18:19.293Z,1478884699.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:19.376Z,1478884699.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:19.665Z,1478884699.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:20.085Z,1478884700.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:20.172Z,1478884700.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:20.437Z,1478884700.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:20.832Z,1478884700.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:20.968Z,1478884700.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:21.233Z,1478884701.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:21.637Z,1478884701.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:21.764Z,1478884701.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:22.036Z,1478884702.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:22.441Z,1478884702.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:22.560Z,1478884702.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:22.848Z,1478884702.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:23.160Z,1478884703.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:23.238Z,1478884703.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:23.568Z,1478884703.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:23.641Z,1478884703.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:23.976Z,1478884703.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:24.041Z,1478884704.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:24.384Z,1478884704.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:24.437Z,1478884704.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:24.828Z,1478884704.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:24.851Z,1478884704.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:25.236Z,1478884705.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:25.245Z,1478884705.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:25.636Z,1478884705.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:25.644Z,1478884705.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:26.035Z,1478884706.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:26.052Z,1478884706.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:26.441Z,1478884706.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:26.460Z,1478884706.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:26.837Z,1478884706.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:26.893Z,1478884706.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:27.250Z,1478884707.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:27.308Z,1478884707.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:27.641Z,1478884707.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:27.716Z,1478884707.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:28.036Z,1478884708.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:28.124Z,1478884708.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:28.441Z,1478884708.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:28.532Z,1478884708.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:28.844Z,1478884708.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:28.940Z,1478884708.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:29.244Z,1478884709.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:29.356Z,1478884709.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:29.655Z,1478884709.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:30.049Z,1478884710.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:30.152Z,1478884710.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:30.440Z,1478884710.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:30.855Z,1478884710.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:30.948Z,1478884710.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:31.265Z,1478884711.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:31.368Z,1478884711.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:31.628Z,1478884711.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:32.041Z,1478884712.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:32.164Z,1478884712.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:32.440Z,1478884712.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:32.885Z,1478884712.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:32.960Z,1478884712.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:33.255Z,1478884713.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:33.368Z,1478884713.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:33.651Z,1478884713.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:34.028Z,1478884714.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:34.164Z,1478884714.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:34.445Z,1478884714.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:34.833Z,1478884714.833 [BPC1](ERROR): Failed to receive battery data
2016-11-11T17:18:34.833Z,1478884714.833 [BPC1] Communications Fault, FailCount= 2
2016-11-11T17:18:34.833Z,1478884714.833 [BPC1](ERROR): Communications Fault
2016-11-11T17:18:34.841Z,1478884714.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:34.887Z,1478884714.888 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T17:18:34.961Z,1478884714.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:35.240Z,1478884715.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:35.428Z,1478884715.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:35.636Z,1478884715.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:36.041Z,1478884716.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:36.088Z,1478884716.088 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:18:36.089Z,1478884716.089 [BPC1] No Fault, FailCount= 2
2016-11-11T17:18:36.226Z,1478884716.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:36.497Z,1478884716.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:36.861Z,1478884716.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:37.020Z,1478884717.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:37.245Z,1478884717.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:37.630Z,1478884717.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:37.784Z,1478884717.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:38.036Z,1478884718.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:38.580Z,1478884718.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:39.377Z,1478884719.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:39.788Z,1478884719.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:40.584Z,1478884720.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:41.336Z,1478884721.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:41.482Z,1478884721.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:41.617Z,1478884721.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:41.993Z,1478884721.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:42.132Z,1478884722.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:42.383Z,1478884722.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:42.793Z,1478884722.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:42.928Z,1478884722.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:43.196Z,1478884723.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:43.336Z,1478884723.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:43.597Z,1478884723.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:44.002Z,1478884724.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:44.132Z,1478884724.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:44.385Z,1478884724.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:44.785Z,1478884724.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:44.928Z,1478884724.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:45.194Z,1478884725.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:45.336Z,1478884725.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:45.591Z,1478884725.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:46.001Z,1478884726.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:46.132Z,1478884726.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:46.400Z,1478884726.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:46.799Z,1478884726.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:46.928Z,1478884726.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:47.204Z,1478884727.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:47.336Z,1478884727.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:47.621Z,1478884727.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:47.987Z,1478884727.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:48.132Z,1478884728.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:48.393Z,1478884728.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:48.877Z,1478884728.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:48.928Z,1478884728.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:49.217Z,1478884729.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:49.428Z,1478884729.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:49.604Z,1478884729.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:50.021Z,1478884730.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:50.224Z,1478884730.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:50.425Z,1478884730.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:50.785Z,1478884730.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:51.020Z,1478884731.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:51.187Z,1478884731.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:51.590Z,1478884731.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:51.768Z,1478884731.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:51.984Z,1478884731.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:52.387Z,1478884732.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:52.564Z,1478884732.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:52.793Z,1478884732.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:53.195Z,1478884733.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:53.360Z,1478884733.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:53.595Z,1478884733.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:53.772Z,1478884733.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:54.038Z,1478884734.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:54.398Z,1478884734.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:54.569Z,1478884734.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:54.790Z,1478884734.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:55.207Z,1478884735.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:55.296Z,1478884735.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:55.605Z,1478884735.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:55.980Z,1478884735.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:56.092Z,1478884736.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:56.385Z,1478884736.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:56.785Z,1478884736.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:56.888Z,1478884736.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:57.192Z,1478884737.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:57.316Z,1478884737.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:57.593Z,1478884737.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:57.991Z,1478884737.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:58.113Z,1478884738.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:58.387Z,1478884738.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:58.795Z,1478884738.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:58.908Z,1478884738.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:59.198Z,1478884739.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:59.316Z,1478884739.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:18:59.598Z,1478884739.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:18:59.999Z,1478884739.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:00.112Z,1478884740.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:00.394Z,1478884740.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:00.798Z,1478884740.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:00.908Z,1478884740.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:01.229Z,1478884741.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:01.316Z,1478884741.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:01.609Z,1478884741.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:01.989Z,1478884741.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:02.112Z,1478884742.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:02.433Z,1478884742.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:02.792Z,1478884742.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:02.909Z,1478884742.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:03.222Z,1478884743.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:03.384Z,1478884743.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:03.593Z,1478884743.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:04.027Z,1478884744.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:04.180Z,1478884744.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:04.387Z,1478884744.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:04.832Z,1478884744.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:04.976Z,1478884744.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:05.201Z,1478884745.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:05.593Z,1478884745.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:05.756Z,1478884745.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:05.997Z,1478884745.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:06.398Z,1478884746.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:06.552Z,1478884746.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:06.790Z,1478884746.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:07.198Z,1478884747.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:07.348Z,1478884747.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:07.596Z,1478884747.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:07.756Z,1478884747.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:07.996Z,1478884747.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:08.399Z,1478884748.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:08.552Z,1478884748.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:08.814Z,1478884748.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:09.189Z,1478884749.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:09.312Z,1478884749.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:09.587Z,1478884749.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:09.992Z,1478884749.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:10.108Z,1478884750.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:10.388Z,1478884750.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:10.843Z,1478884750.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:10.904Z,1478884750.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:11.201Z,1478884751.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:11.312Z,1478884751.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:11.602Z,1478884751.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:12.004Z,1478884752.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:12.108Z,1478884752.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:12.398Z,1478884752.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:12.828Z,1478884752.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:12.904Z,1478884752.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:13.208Z,1478884753.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:13.312Z,1478884753.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:13.583Z,1478884753.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:13.987Z,1478884753.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:14.108Z,1478884754.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:14.387Z,1478884754.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:14.838Z,1478884754.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:14.904Z,1478884754.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:15.193Z,1478884755.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:15.312Z,1478884755.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:15.619Z,1478884755.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:16.004Z,1478884756.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:16.108Z,1478884756.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:16.404Z,1478884756.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:16.822Z,1478884756.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:16.905Z,1478884756.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:17.185Z,1478884757.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:17.364Z,1478884757.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:17.590Z,1478884757.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:18.021Z,1478884758.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:18.160Z,1478884758.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:18.394Z,1478884758.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:18.821Z,1478884758.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:18.956Z,1478884758.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:19.224Z,1478884759.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:19.592Z,1478884759.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:19.740Z,1478884759.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:19.991Z,1478884759.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:20.397Z,1478884760.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:20.536Z,1478884760.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:20.804Z,1478884760.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:21.180Z,1478884761.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:21.332Z,1478884761.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:21.595Z,1478884761.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:21.740Z,1478884761.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:21.993Z,1478884761.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:22.387Z,1478884762.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:22.536Z,1478884762.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:22.851Z,1478884762.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:23.193Z,1478884763.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:23.284Z,1478884763.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:23.602Z,1478884763.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:23.996Z,1478884763.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:24.080Z,1478884764.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:24.393Z,1478884764.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:24.843Z,1478884764.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:24.876Z,1478884764.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:25.215Z,1478884765.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:25.284Z,1478884765.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:25.583Z,1478884765.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:25.991Z,1478884765.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:26.080Z,1478884766.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:26.393Z,1478884766.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:26.833Z,1478884766.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:26.876Z,1478884766.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:27.197Z,1478884767.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:27.288Z,1478884767.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:27.601Z,1478884767.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:27.998Z,1478884767.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:28.084Z,1478884768.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:28.391Z,1478884768.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:28.845Z,1478884768.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:28.880Z,1478884768.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:29.191Z,1478884769.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:29.288Z,1478884769.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:29.590Z,1478884769.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:30.041Z,1478884770.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:30.084Z,1478884770.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:30.394Z,1478884770.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:30.792Z,1478884770.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:30.881Z,1478884770.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:31.214Z,1478884771.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:31.344Z,1478884771.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:31.592Z,1478884771.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:31.996Z,1478884771.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:32.140Z,1478884772.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:32.430Z,1478884772.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:32.801Z,1478884772.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:32.936Z,1478884772.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:33.228Z,1478884773.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:33.605Z,1478884773.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:33.732Z,1478884773.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:34.015Z,1478884774.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:34.140Z,1478884774.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:34.400Z,1478884774.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:34.801Z,1478884774.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:34.936Z,1478884774.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:35.203Z,1478884775.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:35.607Z,1478884775.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:35.724Z,1478884775.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:35.986Z,1478884775.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:36.409Z,1478884776.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:36.520Z,1478884776.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:36.837Z,1478884776.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:37.189Z,1478884777.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:37.252Z,1478884777.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:37.597Z,1478884777.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:38.017Z,1478884778.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:38.048Z,1478884778.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:38.380Z,1478884778.380 [PNI_TCM](ERROR): CRC does not match. Expected:0x47956 got:0x17045
2016-11-11T17:19:38.398Z,1478884778.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:38.844Z,1478884778.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:39.252Z,1478884779.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:40.048Z,1478884780.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:40.844Z,1478884780.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:41.252Z,1478884781.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:41.826Z,1478884781.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:41.966Z,1478884781.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:42.048Z,1478884782.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:42.299Z,1478884782.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:42.697Z,1478884782.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:42.844Z,1478884782.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:43.100Z,1478884783.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:43.252Z,1478884783.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:43.507Z,1478884783.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:43.906Z,1478884783.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:44.048Z,1478884784.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:44.333Z,1478884784.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:44.712Z,1478884784.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:44.844Z,1478884784.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:45.113Z,1478884785.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:45.324Z,1478884785.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:45.513Z,1478884785.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:45.941Z,1478884785.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:46.120Z,1478884786.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:46.296Z,1478884786.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:46.699Z,1478884786.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:46.916Z,1478884786.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:47.141Z,1478884787.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:47.503Z,1478884787.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:47.680Z,1478884787.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:47.934Z,1478884787.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:48.334Z,1478884788.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:48.476Z,1478884788.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:48.705Z,1478884788.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:49.101Z,1478884789.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:49.273Z,1478884789.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:49.517Z,1478884789.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:49.684Z,1478884789.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:49.932Z,1478884789.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:50.296Z,1478884790.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:50.480Z,1478884790.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:50.697Z,1478884790.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:51.110Z,1478884791.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:51.228Z,1478884791.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:51.512Z,1478884791.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:51.901Z,1478884791.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:52.025Z,1478884792.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:52.310Z,1478884792.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:52.712Z,1478884792.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:52.820Z,1478884792.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:53.116Z,1478884793.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:53.232Z,1478884793.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:53.510Z,1478884793.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:53.932Z,1478884793.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:54.028Z,1478884794.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:54.295Z,1478884794.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:54.705Z,1478884794.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:54.824Z,1478884794.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:55.107Z,1478884795.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:55.236Z,1478884795.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:55.512Z,1478884795.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:55.925Z,1478884795.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:56.032Z,1478884796.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:56.316Z,1478884796.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:56.709Z,1478884796.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:56.828Z,1478884796.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:57.120Z,1478884797.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:57.236Z,1478884797.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:57.505Z,1478884797.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:57.907Z,1478884797.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:58.032Z,1478884798.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:58.299Z,1478884798.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:58.700Z,1478884798.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:58.831Z,1478884798.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:59.118Z,1478884799.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:59.300Z,1478884799.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:19:59.501Z,1478884799.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:19:59.908Z,1478884799.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:00.096Z,1478884800.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:00.337Z,1478884800.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:00.692Z,1478884800.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:00.892Z,1478884800.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:01.096Z,1478884801.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:01.526Z,1478884801.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:01.656Z,1478884801.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:01.898Z,1478884801.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:02.343Z,1478884802.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:02.452Z,1478884802.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:02.705Z,1478884802.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:03.142Z,1478884803.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:03.248Z,1478884803.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:03.509Z,1478884803.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:03.660Z,1478884803.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:03.911Z,1478884803.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:04.303Z,1478884804.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:04.456Z,1478884804.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:04.713Z,1478884804.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:05.097Z,1478884805.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:05.216Z,1478884805.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:05.501Z,1478884805.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:05.900Z,1478884805.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:06.012Z,1478884806.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:06.299Z,1478884806.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:06.699Z,1478884806.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:06.808Z,1478884806.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:07.128Z,1478884807.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:07.224Z,1478884807.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:07.504Z,1478884807.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:07.915Z,1478884807.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:08.021Z,1478884808.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:08.308Z,1478884808.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:08.699Z,1478884808.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:08.816Z,1478884808.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:09.110Z,1478884809.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:09.224Z,1478884809.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:09.509Z,1478884809.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:09.905Z,1478884809.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:10.020Z,1478884810.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:10.313Z,1478884810.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:10.746Z,1478884810.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:10.816Z,1478884810.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:11.135Z,1478884811.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:11.224Z,1478884811.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:11.499Z,1478884811.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:11.913Z,1478884811.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:12.020Z,1478884812.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:12.309Z,1478884812.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:12.710Z,1478884812.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:12.822Z,1478884812.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:13.122Z,1478884813.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:13.276Z,1478884813.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:13.531Z,1478884813.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:13.915Z,1478884813.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:14.072Z,1478884814.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:14.304Z,1478884814.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:14.705Z,1478884814.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:14.868Z,1478884814.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:15.122Z,1478884815.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:15.504Z,1478884815.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:15.656Z,1478884815.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:15.937Z,1478884815.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:16.299Z,1478884816.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:16.452Z,1478884816.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:16.741Z,1478884816.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:17.138Z,1478884817.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:17.248Z,1478884817.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:17.505Z,1478884817.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:17.664Z,1478884817.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:17.904Z,1478884817.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:18.313Z,1478884818.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:18.460Z,1478884818.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:18.741Z,1478884818.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:19.104Z,1478884819.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:19.204Z,1478884819.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:19.501Z,1478884819.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:19.907Z,1478884819.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:19.000Z,1478884820.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:20.302Z,1478884820.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:20.757Z,1478884820.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:20.796Z,1478884820.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:21.134Z,1478884821.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:21.204Z,1478884821.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:21.501Z,1478884821.501 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:21.502Z,1478884821.501 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 230
2016-11-11T17:20:21.502Z,1478884821.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:20:21.512Z,1478884821.511 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:21.512Z,1478884821.512 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 230
2016-11-11T17:20:21.512Z,1478884821.512 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:20:21.514Z,1478884821.514 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:21.514Z,1478884821.514 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 230
2016-11-11T17:20:21.514Z,1478884821.514 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:20:21.544Z,1478884821.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:20:21.545Z,1478884821.545 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:20:21.545Z,1478884821.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:20:21.921Z,1478884821.921 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:20:21.921Z,1478884821.921 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 230
2016-11-11T17:20:21.922Z,1478884821.921 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:20:21.922Z,1478884821.922 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 230
2016-11-11T17:20:21.922Z,1478884821.922 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:20:21.922Z,1478884821.922 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 230
2016-11-11T17:20:21.000Z,1478884822.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:22.301Z,1478884822.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:20:22.301Z,1478884822.301 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:20:22.302Z,1478884822.302 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:20:22.317Z,1478884822.318 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:20:22.318Z,1478884822.318 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:20:22.318Z,1478884822.318 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:20:22.319Z,1478884822.319 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:20:22.319Z,1478884822.319 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:20:22.320Z,1478884822.320 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:20:22.744Z,1478884822.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:22.796Z,1478884822.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:23.121Z,1478884823.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:23.205Z,1478884823.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:23.500Z,1478884823.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:23.905Z,1478884823.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:23.000Z,1478884824.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:24.332Z,1478884824.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:24.762Z,1478884824.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:24.796Z,1478884824.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:25.115Z,1478884825.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:25.240Z,1478884825.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:25.495Z,1478884825.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:25.897Z,1478884825.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:26.036Z,1478884826.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:26.304Z,1478884826.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:26.708Z,1478884826.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:26.833Z,1478884826.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:27.105Z,1478884827.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:27.256Z,1478884827.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:27.549Z,1478884827.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:27.908Z,1478884827.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:28.052Z,1478884828.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:28.307Z,1478884828.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:28.717Z,1478884828.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:28.848Z,1478884828.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:29.141Z,1478884829.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:29.508Z,1478884829.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:29.644Z,1478884829.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:29.912Z,1478884829.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:30.052Z,1478884830.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:30.349Z,1478884830.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:30.720Z,1478884830.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:30.848Z,1478884830.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:31.129Z,1478884831.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:31.522Z,1478884831.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:31.640Z,1478884831.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:31.901Z,1478884831.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:32.321Z,1478884832.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:32.436Z,1478884832.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:32.753Z,1478884832.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:33.109Z,1478884833.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:33.176Z,1478884833.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:33.512Z,1478884833.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:33.909Z,1478884833.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:33.972Z,1478884833.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:34.311Z,1478884834.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:34.746Z,1478884834.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:34.768Z,1478884834.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:35.116Z,1478884835.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:35.192Z,1478884835.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:35.510Z,1478884835.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:35.907Z,1478884835.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:35.989Z,1478884835.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:36.307Z,1478884836.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:36.751Z,1478884836.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:36.784Z,1478884836.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:37.119Z,1478884837.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:37.192Z,1478884837.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:37.495Z,1478884837.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:37.910Z,1478884837.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:37.988Z,1478884837.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:38.304Z,1478884838.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:38.756Z,1478884838.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:38.784Z,1478884838.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:39.192Z,1478884839.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:39.988Z,1478884839.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:40.785Z,1478884840.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:41.260Z,1478884841.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:42.056Z,1478884842.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:42.241Z,1478884842.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:42.377Z,1478884842.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:42.791Z,1478884842.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:42.852Z,1478884842.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:43.234Z,1478884843.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:43.566Z,1478884843.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:43.604Z,1478884843.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:44.000Z,1478884844.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:44.376Z,1478884844.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:44.400Z,1478884844.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:44.773Z,1478884844.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:45.197Z,1478884845.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:45.239Z,1478884845.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:45.584Z,1478884845.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:45.628Z,1478884845.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:45.981Z,1478884845.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:46.355Z,1478884846.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:46.424Z,1478884846.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:46.789Z,1478884846.789 [BPC1](ERROR): Failed to receive battery data
2016-11-11T17:20:46.789Z,1478884846.789 [BPC1] Communications Fault, FailCount= 1
2016-11-11T17:20:46.789Z,1478884846.789 [BPC1](ERROR): Communications Fault
2016-11-11T17:20:46.809Z,1478884846.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:46.877Z,1478884846.877 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T17:20:47.152Z,1478884847.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:47.179Z,1478884847.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:47.569Z,1478884847.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:47.949Z,1478884847.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:47.965Z,1478884847.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:48.025Z,1478884848.025 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:20:48.025Z,1478884848.025 [BPC1] No Fault, FailCount= 1
2016-11-11T17:20:48.425Z,1478884848.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:48.744Z,1478884848.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:48.813Z,1478884848.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:49.152Z,1478884849.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:49.177Z,1478884849.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:49.566Z,1478884849.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:49.948Z,1478884849.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:49.977Z,1478884849.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:50.381Z,1478884850.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:50.744Z,1478884850.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:50.764Z,1478884850.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:51.152Z,1478884851.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:51.164Z,1478884851.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:51.565Z,1478884851.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:51.948Z,1478884851.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:51.964Z,1478884851.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:52.373Z,1478884852.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:52.744Z,1478884852.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:52.795Z,1478884852.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:53.152Z,1478884853.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:53.168Z,1478884853.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:53.565Z,1478884853.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:53.948Z,1478884853.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:53.970Z,1478884853.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:54.365Z,1478884854.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:54.752Z,1478884854.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:54.816Z,1478884854.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:55.176Z,1478884855.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:55.276Z,1478884855.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:55.569Z,1478884855.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:55.981Z,1478884855.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:56.072Z,1478884856.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:56.381Z,1478884856.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:56.769Z,1478884856.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:56.868Z,1478884856.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:57.211Z,1478884857.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:57.574Z,1478884857.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:57.612Z,1478884857.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:57.981Z,1478884857.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:58.375Z,1478884858.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:58.408Z,1478884858.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:58.768Z,1478884858.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:59.194Z,1478884859.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:59.204Z,1478884859.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:59.582Z,1478884859.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:20:59.620Z,1478884859.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:20:59.981Z,1478884859.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:00.416Z,1478884860.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:00.418Z,1478884860.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:00.774Z,1478884860.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:01.104Z,1478884861.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:01.173Z,1478884861.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:01.620Z,1478884861.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:01.900Z,1478884861.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:01.975Z,1478884861.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:02.386Z,1478884862.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:02.696Z,1478884862.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:02.813Z,1478884862.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:03.132Z,1478884863.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:03.158Z,1478884863.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:03.584Z,1478884863.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:03.928Z,1478884863.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:03.965Z,1478884863.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:04.364Z,1478884864.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:04.724Z,1478884864.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:04.792Z,1478884864.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:05.132Z,1478884865.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:05.167Z,1478884865.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:05.564Z,1478884865.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:05.930Z,1478884865.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:05.967Z,1478884865.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:06.364Z,1478884866.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:06.724Z,1478884866.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:06.805Z,1478884866.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:07.132Z,1478884867.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:07.166Z,1478884867.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:07.567Z,1478884867.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:07.928Z,1478884867.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:07.973Z,1478884867.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:08.374Z,1478884868.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:08.725Z,1478884868.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:08.839Z,1478884868.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:09.172Z,1478884869.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:09.232Z,1478884869.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:09.561Z,1478884869.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:09.960Z,1478884869.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:10.028Z,1478884870.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:10.369Z,1478884870.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:10.762Z,1478884870.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:10.824Z,1478884870.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:11.209Z,1478884871.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:11.567Z,1478884871.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:11.612Z,1478884871.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:11.970Z,1478884871.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:12.380Z,1478884872.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:12.421Z,1478884872.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:12.779Z,1478884872.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:13.185Z,1478884873.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:13.216Z,1478884873.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:13.581Z,1478884873.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:13.624Z,1478884873.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:13.996Z,1478884873.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:14.361Z,1478884874.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:14.420Z,1478884874.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:14.801Z,1478884874.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:15.084Z,1478884875.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:15.205Z,1478884875.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:15.569Z,1478884875.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:15.880Z,1478884875.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:16.002Z,1478884876.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:16.373Z,1478884876.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:16.676Z,1478884876.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:16.807Z,1478884876.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:17.084Z,1478884877.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:17.205Z,1478884877.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:17.569Z,1478884877.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:17.880Z,1478884877.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:17.972Z,1478884877.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:18.364Z,1478884878.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:18.676Z,1478884878.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:18.791Z,1478884878.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:19.101Z,1478884879.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:19.181Z,1478884879.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:19.572Z,1478884879.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:19.896Z,1478884879.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:19.975Z,1478884879.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:20.376Z,1478884880.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:20.692Z,1478884880.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:20.775Z,1478884880.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:21.100Z,1478884881.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:21.176Z,1478884881.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:21.576Z,1478884881.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:21.896Z,1478884881.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:21.968Z,1478884881.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:22.382Z,1478884882.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:22.692Z,1478884882.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:22.800Z,1478884882.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:23.164Z,1478884883.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:23.228Z,1478884883.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:23.582Z,1478884883.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:23.984Z,1478884883.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:24.024Z,1478884884.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:24.356Z,1478884884.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:24.761Z,1478884884.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:24.820Z,1478884884.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:25.195Z,1478884885.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:25.560Z,1478884885.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:25.564Z,1478884885.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:25.961Z,1478884885.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:26.360Z,1478884886.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:26.365Z,1478884886.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:26.764Z,1478884886.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:27.156Z,1478884887.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:27.180Z,1478884887.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:27.564Z,1478884887.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:27.570Z,1478884887.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:27.968Z,1478884887.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:28.360Z,1478884888.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:28.366Z,1478884888.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:28.770Z,1478884888.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:29.060Z,1478884889.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:29.221Z,1478884889.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:29.569Z,1478884889.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:29.856Z,1478884889.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:30.032Z,1478884890.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:30.404Z,1478884890.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:30.652Z,1478884890.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:30.771Z,1478884890.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:31.060Z,1478884891.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:31.190Z,1478884891.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:31.566Z,1478884891.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:31.856Z,1478884891.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:32.015Z,1478884892.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:32.365Z,1478884892.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:32.652Z,1478884892.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:32.775Z,1478884892.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:33.060Z,1478884893.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:33.170Z,1478884893.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:33.570Z,1478884893.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:33.856Z,1478884893.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:33.966Z,1478884893.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:34.368Z,1478884894.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:34.652Z,1478884894.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:34.780Z,1478884894.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:35.060Z,1478884895.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:35.168Z,1478884895.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:35.576Z,1478884895.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:35.856Z,1478884895.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:35.983Z,1478884895.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:36.356Z,1478884896.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:36.652Z,1478884896.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:36.830Z,1478884896.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:37.161Z,1478884897.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:37.188Z,1478884897.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:37.562Z,1478884897.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:37.571Z,1478884897.571 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T17:21:37.571Z,1478884897.571 [Default:CheckIn:C.Wait] Stopped
2016-11-11T17:21:37.571Z,1478884897.571 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T17:21:37.571Z,1478884897.571 [Default:CheckIn:D] Running Loop=1
2016-11-11T17:21:37.968Z,1478884897.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:37.977Z,1478884897.977 [Default:CheckIn:D] Stopped
2016-11-11T17:21:37.977Z,1478884897.977 [Default:CheckIn:E] Running Loop=1
2016-11-11T17:21:37.984Z,1478884897.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:38.363Z,1478884898.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:38.371Z,1478884898.372 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 751.611133 min 
2016-11-11T17:21:38.372Z,1478884898.372 [Default:CheckIn:E] Stopped
2016-11-11T17:21:38.372Z,1478884898.372 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T17:21:38.372Z,1478884898.372 [Default:CheckIn] Stopped
2016-11-11T17:21:38.372Z,1478884898.372 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T17:21:38.372Z,1478884898.372 [Default:CheckIn](INFO): Running loop #73
2016-11-11T17:21:38.372Z,1478884898.372 [Default:CheckIn] Running Loop=73
2016-11-11T17:21:38.373Z,1478884898.373 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T17:21:38.373Z,1478884898.373 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T17:21:38.765Z,1478884898.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:38.780Z,1478884898.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:39.512Z,1478884899.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:40.308Z,1478884900.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:41.105Z,1478884901.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:41.520Z,1478884901.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:42.094Z,1478884902.094 [NAL9602](INFO): Powering up
2016-11-11T17:21:42.133Z,1478884902.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:42.270Z,1478884902.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:42.317Z,1478884902.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:42.688Z,1478884902.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:43.057Z,1478884903.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:43.084Z,1478884903.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:43.444Z,1478884903.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:43.877Z,1478884903.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:43.880Z,1478884903.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:44.266Z,1478884904.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:44.668Z,1478884904.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:44.676Z,1478884904.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:45.051Z,1478884905.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:45.084Z,1478884905.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:45.475Z,1478884905.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:45.842Z,1478884905.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:45.880Z,1478884905.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:46.285Z,1478884906.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:46.676Z,1478884906.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:46.692Z,1478884906.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:47.037Z,1478884907.037 [BPC1](ERROR): Failed to receive battery data
2016-11-11T17:21:47.038Z,1478884907.037 [BPC1] Communications Fault, FailCount= 1
2016-11-11T17:21:47.038Z,1478884907.038 [BPC1](ERROR): Communications Fault
2016-11-11T17:21:47.046Z,1478884907.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:47.084Z,1478884907.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:47.100Z,1478884907.099 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T17:21:47.443Z,1478884907.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:47.851Z,1478884907.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:47.880Z,1478884907.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:48.245Z,1478884908.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:48.268Z,1478884908.267 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:21:48.268Z,1478884908.268 [BPC1] No Fault, FailCount= 1
2016-11-11T17:21:48.676Z,1478884908.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:48.757Z,1478884908.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:49.078Z,1478884909.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:49.096Z,1478884909.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:49.473Z,1478884909.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:49.864Z,1478884909.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:49.900Z,1478884909.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:50.264Z,1478884910.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:50.642Z,1478884910.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:50.696Z,1478884910.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:51.045Z,1478884911.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:51.160Z,1478884911.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:51.479Z,1478884911.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:51.860Z,1478884911.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:51.956Z,1478884911.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:52.255Z,1478884912.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:52.660Z,1478884912.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:52.752Z,1478884912.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:53.005Z,1478884913.005 [NAL9602](INFO): NAL9602 initialized
2016-11-11T17:21:53.111Z,1478884913.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:53.445Z,1478884913.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:53.532Z,1478884913.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:53.812Z,1478884913.812 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T17:21:53.812Z,1478884913.812 [NAL9602] Data Fault, FailCount= 2
2016-11-11T17:21:53.812Z,1478884913.812 [NAL9602](ERROR): Data Fault
2016-11-11T17:21:53.845Z,1478884913.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:53.899Z,1478884913.899 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T17:21:54.204Z,1478884914.204 [NAL9602](INFO): Powering down
2016-11-11T17:21:54.281Z,1478884914.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:54.328Z,1478884914.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:54.651Z,1478884914.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:55.110Z,1478884915.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:55.124Z,1478884915.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:55.162Z,1478884915.162 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T17:21:55.162Z,1478884915.162 [NAL9602] No Fault, FailCount= 2
2016-11-11T17:21:55.444Z,1478884915.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:55.532Z,1478884915.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:55.882Z,1478884915.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:56.287Z,1478884916.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:56.328Z,1478884916.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:56.664Z,1478884916.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:57.055Z,1478884917.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:57.060Z,1478884917.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:57.457Z,1478884917.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:57.846Z,1478884917.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:57.856Z,1478884917.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:58.255Z,1478884918.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:58.652Z,1478884918.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:58.668Z,1478884918.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:59.060Z,1478884919.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:59.075Z,1478884919.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:59.405Z,1478884919.405 [NAL9602](INFO): Powering up NAL9602
2016-11-11T17:21:59.470Z,1478884919.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:21:59.856Z,1478884919.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:21:59.867Z,1478884919.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:00.280Z,1478884920.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:00.652Z,1478884920.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:00.705Z,1478884920.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:01.054Z,1478884921.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:01.092Z,1478884921.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:01.450Z,1478884921.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:01.860Z,1478884921.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:01.888Z,1478884921.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:02.270Z,1478884922.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:02.684Z,1478884922.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:02.738Z,1478884922.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:03.053Z,1478884923.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:03.120Z,1478884923.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:03.467Z,1478884923.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:03.846Z,1478884923.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:03.916Z,1478884923.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:04.278Z,1478884924.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:04.712Z,1478884924.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:04.735Z,1478884924.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:05.051Z,1478884925.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:05.164Z,1478884925.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:05.465Z,1478884925.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:05.878Z,1478884925.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:05.960Z,1478884925.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:06.255Z,1478884926.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:06.677Z,1478884926.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:06.756Z,1478884926.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:07.093Z,1478884927.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:07.443Z,1478884927.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:07.552Z,1478884927.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:07.887Z,1478884927.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:08.278Z,1478884928.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:08.348Z,1478884928.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:08.659Z,1478884928.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:09.132Z,1478884929.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:09.144Z,1478884929.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:09.449Z,1478884929.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:09.552Z,1478884929.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:09.917Z,1478884929.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:10.213Z,1478884930.213 [NAL9602](INFO): NAL9602 initialized
2016-11-11T17:22:10.282Z,1478884930.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:10.348Z,1478884930.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:10.675Z,1478884930.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:10.992Z,1478884930.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:11.058Z,1478884931.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:11.489Z,1478884931.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:11.788Z,1478884931.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:11.869Z,1478884931.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:12.272Z,1478884932.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:12.584Z,1478884932.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:12.678Z,1478884932.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:13.058Z,1478884933.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:13.092Z,1478884933.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:13.466Z,1478884933.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:13.866Z,1478884933.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:13.904Z,1478884933.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:14.278Z,1478884934.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:14.680Z,1478884934.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:14.700Z,1478884934.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:15.064Z,1478884935.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:15.108Z,1478884935.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:15.465Z,1478884935.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:15.866Z,1478884935.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:15.904Z,1478884935.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:16.267Z,1478884936.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:16.654Z,1478884936.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:16.700Z,1478884936.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:17.046Z,1478884937.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:17.108Z,1478884937.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:17.450Z,1478884937.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:17.877Z,1478884937.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:17.904Z,1478884937.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:18.266Z,1478884938.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:18.700Z,1478884938.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:18.712Z,1478884938.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:19.075Z,1478884939.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:19.192Z,1478884939.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:19.458Z,1478884939.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:19.861Z,1478884939.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:19.988Z,1478884939.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:20.269Z,1478884940.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:20.662Z,1478884940.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:20.784Z,1478884940.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:21.142Z,1478884941.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:21.461Z,1478884941.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:21.532Z,1478884941.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:21.856Z,1478884941.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:22.291Z,1478884942.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:22.328Z,1478884942.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:22.661Z,1478884942.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:23.096Z,1478884943.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:23.124Z,1478884943.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:23.501Z,1478884943.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:23.532Z,1478884943.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:23.873Z,1478884943.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:24.286Z,1478884944.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:24.328Z,1478884944.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:24.685Z,1478884944.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:25.011Z,1478884945.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:25.054Z,1478884945.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:25.456Z,1478884945.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:25.804Z,1478884945.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:25.868Z,1478884945.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:26.273Z,1478884946.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:26.600Z,1478884946.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:26.690Z,1478884946.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:27.008Z,1478884947.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:27.079Z,1478884947.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:27.461Z,1478884947.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:27.804Z,1478884947.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:27.901Z,1478884947.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:28.261Z,1478884948.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:28.600Z,1478884948.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:28.701Z,1478884948.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:29.008Z,1478884949.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:29.070Z,1478884949.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:29.458Z,1478884949.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:29.804Z,1478884949.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:29.865Z,1478884949.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:30.256Z,1478884950.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:30.600Z,1478884950.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:30.665Z,1478884950.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:31.008Z,1478884951.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:31.038Z,1478884951.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:31.461Z,1478884951.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:31.804Z,1478884951.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:31.845Z,1478884951.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:32.249Z,1478884952.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:32.600Z,1478884952.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:32.706Z,1478884952.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:33.048Z,1478884953.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:33.096Z,1478884953.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:33.452Z,1478884953.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:33.886Z,1478884953.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:33.892Z,1478884953.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:34.254Z,1478884954.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:34.688Z,1478884954.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:34.723Z,1478884954.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:35.101Z,1478884955.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:35.420Z,1478884955.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:35.464Z,1478884955.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:35.836Z,1478884955.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:36.218Z,1478884956.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:36.241Z,1478884956.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:36.653Z,1478884956.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:37.012Z,1478884957.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:37.097Z,1478884957.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:37.449Z,1478884957.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:37.810Z,1478884957.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:37.857Z,1478884957.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:38.282Z,1478884958.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:38.604Z,1478884958.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:38.651Z,1478884958.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:39.094Z,1478884959.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:39.400Z,1478884959.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:40.196Z,1478884960.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:40.992Z,1478884960.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:41.788Z,1478884961.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:42.543Z,1478884962.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:42.584Z,1478884962.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:42.708Z,1478884962.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:43.075Z,1478884963.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:43.380Z,1478884963.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:43.472Z,1478884963.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:43.849Z,1478884963.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:44.176Z,1478884964.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:44.286Z,1478884964.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:44.657Z,1478884964.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:44.975Z,1478884964.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:45.055Z,1478884965.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:45.453Z,1478884965.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:45.768Z,1478884965.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:45.852Z,1478884965.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:46.249Z,1478884966.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:46.564Z,1478884966.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:46.657Z,1478884966.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:47.068Z,1478884967.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:47.360Z,1478884967.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:47.472Z,1478884967.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:47.887Z,1478884967.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:48.156Z,1478884968.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:48.275Z,1478884968.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:48.665Z,1478884968.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:48.952Z,1478884968.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:49.062Z,1478884969.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:49.454Z,1478884969.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:49.748Z,1478884969.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:49.853Z,1478884969.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:50.255Z,1478884970.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:50.544Z,1478884970.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:50.661Z,1478884970.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:51.050Z,1478884971.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:51.340Z,1478884971.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:51.449Z,1478884971.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:51.858Z,1478884971.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:52.136Z,1478884972.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:52.274Z,1478884972.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:52.671Z,1478884972.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:52.932Z,1478884972.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:53.097Z,1478884973.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:53.479Z,1478884973.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:53.728Z,1478884973.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:53.846Z,1478884973.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:54.247Z,1478884974.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:54.524Z,1478884974.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:54.686Z,1478884974.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:55.061Z,1478884975.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:55.320Z,1478884975.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:55.489Z,1478884975.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:55.849Z,1478884975.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:56.116Z,1478884976.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:56.288Z,1478884976.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:56.691Z,1478884976.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:56.912Z,1478884976.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:57.058Z,1478884977.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:57.506Z,1478884977.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:57.708Z,1478884977.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:57.870Z,1478884977.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:58.116Z,1478884978.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:58.271Z,1478884978.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:58.524Z,1478884978.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:58.672Z,1478884978.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:58.932Z,1478884978.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:59.053Z,1478884979.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:59.340Z,1478884979.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:59.457Z,1478884979.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:22:59.748Z,1478884979.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:22:59.854Z,1478884979.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:00.156Z,1478884980.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:00.250Z,1478884980.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:00.565Z,1478884980.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:00.666Z,1478884980.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:00.976Z,1478884980.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:01.061Z,1478884981.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:01.384Z,1478884981.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:01.465Z,1478884981.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:01.792Z,1478884981.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:01.869Z,1478884981.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:02.200Z,1478884982.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:02.273Z,1478884982.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:02.608Z,1478884982.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:02.693Z,1478884982.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:03.016Z,1478884983.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:03.070Z,1478884983.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:03.452Z,1478884983.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:03.476Z,1478884983.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:03.861Z,1478884983.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:04.248Z,1478884984.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:04.249Z,1478884984.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:04.647Z,1478884984.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:05.044Z,1478884985.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:05.056Z,1478884985.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:05.452Z,1478884985.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:05.453Z,1478884985.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:05.845Z,1478884985.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:06.248Z,1478884986.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:06.261Z,1478884986.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:06.633Z,1478884986.633 [BPC1](ERROR): Failed to parse message.
2016-11-11T17:23:06.633Z,1478884986.634 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T17:23:06.634Z,1478884986.634 [BPC1] Data Fault, FailCount= 1
2016-11-11T17:23:06.634Z,1478884986.634 [BPC1](ERROR): Data Fault
2016-11-11T17:23:06.668Z,1478884986.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:06.705Z,1478884986.704 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T17:23:06.892Z,1478884986.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:07.042Z,1478884987.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:07.445Z,1478884987.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:07.688Z,1478884987.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:07.854Z,1478884987.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:07.911Z,1478884987.911 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:23:07.911Z,1478884987.911 [BPC1] No Fault, FailCount= 1
2016-11-11T17:23:08.320Z,1478884988.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:08.485Z,1478884988.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:08.709Z,1478884988.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:08.912Z,1478884988.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:09.051Z,1478884989.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:09.453Z,1478884989.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:09.708Z,1478884989.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:09.848Z,1478884989.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:10.255Z,1478884990.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:10.504Z,1478884990.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:10.655Z,1478884990.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:10.912Z,1478884990.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:11.054Z,1478884991.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:11.458Z,1478884991.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:11.708Z,1478884991.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:11.853Z,1478884991.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:12.249Z,1478884992.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:12.504Z,1478884992.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:12.656Z,1478884992.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:12.912Z,1478884992.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:13.069Z,1478884993.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:13.462Z,1478884993.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:13.708Z,1478884993.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:13.873Z,1478884993.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:14.262Z,1478884994.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:14.504Z,1478884994.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:14.657Z,1478884994.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:14.984Z,1478884994.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:15.056Z,1478884995.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:15.453Z,1478884995.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:15.780Z,1478884995.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:15.855Z,1478884995.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:16.256Z,1478884996.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:16.576Z,1478884996.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:16.660Z,1478884996.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:17.061Z,1478884997.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:17.344Z,1478884997.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:17.457Z,1478884997.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:17.865Z,1478884997.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:18.140Z,1478884998.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:18.267Z,1478884998.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:18.672Z,1478884998.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:18.936Z,1478884998.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:19.103Z,1478884999.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:19.344Z,1478884999.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:19.455Z,1478884999.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:19.851Z,1478884999.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:20.140Z,1478885000.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:20.255Z,1478885000.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:20.649Z,1478885000.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:20.874Z,1478885000.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:21.094Z,1478885001.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:21.452Z,1478885001.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:21.668Z,1478885001.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:21.874Z,1478885001.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:22.257Z,1478885002.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:22.464Z,1478885002.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:22.694Z,1478885002.694 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:22.694Z,1478885002.694 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 231
2016-11-11T17:23:22.694Z,1478885002.694 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:23:22.701Z,1478885002.701 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:22.701Z,1478885002.701 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 231
2016-11-11T17:23:22.701Z,1478885002.701 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:23:22.703Z,1478885002.703 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:22.703Z,1478885002.703 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 231
2016-11-11T17:23:22.703Z,1478885002.703 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:23:22.718Z,1478885002.718 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:23:22.718Z,1478885002.718 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:23:22.718Z,1478885002.718 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:23:22.872Z,1478885002.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:23.122Z,1478885003.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:23:23.122Z,1478885003.122 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 231
2016-11-11T17:23:23.122Z,1478885003.122 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:23:23.122Z,1478885003.122 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 231
2016-11-11T17:23:23.123Z,1478885003.123 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:23:23.123Z,1478885003.123 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 231
2016-11-11T17:23:23.464Z,1478885003.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:23:23.465Z,1478885003.465 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:23:23.465Z,1478885003.465 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:23:23.470Z,1478885003.470 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:23:23.470Z,1478885003.470 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:23:23.471Z,1478885003.471 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:23:23.471Z,1478885003.471 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:23:23.472Z,1478885003.472 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:23:23.472Z,1478885003.472 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:23:23.668Z,1478885003.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:23.876Z,1478885003.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:24.273Z,1478885004.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:24.464Z,1478885004.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:24.667Z,1478885004.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:24.872Z,1478885004.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:25.064Z,1478885005.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:25.468Z,1478885005.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:25.668Z,1478885005.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:25.861Z,1478885005.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:26.265Z,1478885006.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:26.464Z,1478885006.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:26.669Z,1478885006.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:26.872Z,1478885006.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:27.045Z,1478885007.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:27.449Z,1478885007.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:27.668Z,1478885007.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:27.849Z,1478885007.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:28.249Z,1478885008.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:28.464Z,1478885008.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:28.665Z,1478885008.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:28.964Z,1478885008.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:29.069Z,1478885009.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:29.463Z,1478885009.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:29.760Z,1478885009.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:29.865Z,1478885009.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:30.261Z,1478885010.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:30.556Z,1478885010.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:30.649Z,1478885010.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:31.057Z,1478885011.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:31.320Z,1478885011.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:31.457Z,1478885011.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:31.860Z,1478885011.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:32.116Z,1478885012.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:32.249Z,1478885012.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:32.649Z,1478885012.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:32.912Z,1478885012.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:33.073Z,1478885013.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:33.324Z,1478885013.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:33.486Z,1478885013.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:33.862Z,1478885013.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:34.120Z,1478885014.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:34.258Z,1478885014.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:34.706Z,1478885014.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:34.860Z,1478885014.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:35.065Z,1478885015.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:35.456Z,1478885015.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:35.656Z,1478885015.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:35.854Z,1478885015.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:36.266Z,1478885016.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:36.452Z,1478885016.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:36.657Z,1478885016.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:36.860Z,1478885016.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:37.104Z,1478885017.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:37.466Z,1478885017.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:37.656Z,1478885017.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:37.856Z,1478885017.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:38.258Z,1478885018.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:38.452Z,1478885018.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:38.659Z,1478885018.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:38.860Z,1478885018.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:39.066Z,1478885019.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:39.656Z,1478885019.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:40.452Z,1478885020.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:40.860Z,1478885020.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:41.656Z,1478885021.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:42.452Z,1478885022.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:42.710Z,1478885022.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:42.820Z,1478885022.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:42.964Z,1478885022.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:43.210Z,1478885023.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:43.583Z,1478885023.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:43.760Z,1478885023.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:44.010Z,1478885024.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:44.379Z,1478885024.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:44.556Z,1478885024.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:44.784Z,1478885024.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:45.193Z,1478885025.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:45.316Z,1478885025.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:45.600Z,1478885025.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:46.005Z,1478885026.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:46.112Z,1478885026.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:46.389Z,1478885026.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:46.797Z,1478885026.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:46.908Z,1478885026.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:47.204Z,1478885027.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:47.316Z,1478885027.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:47.599Z,1478885027.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:48.026Z,1478885028.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:48.112Z,1478885028.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:48.455Z,1478885028.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:48.803Z,1478885028.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:48.872Z,1478885028.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:49.204Z,1478885029.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:49.631Z,1478885029.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:49.668Z,1478885029.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:49.982Z,1478885029.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:50.464Z,1478885030.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:50.485Z,1478885030.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:50.787Z,1478885030.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:50.872Z,1478885030.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:51.215Z,1478885031.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:51.621Z,1478885031.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:51.668Z,1478885031.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:51.991Z,1478885031.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:52.438Z,1478885032.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:52.464Z,1478885032.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:52.800Z,1478885032.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:52.872Z,1478885032.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:53.201Z,1478885033.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:53.595Z,1478885033.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:53.668Z,1478885033.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:53.989Z,1478885033.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:54.439Z,1478885034.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:54.464Z,1478885034.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:54.797Z,1478885034.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:54.872Z,1478885034.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:55.193Z,1478885035.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:55.582Z,1478885035.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:55.668Z,1478885035.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:56.002Z,1478885036.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:56.382Z,1478885036.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:56.465Z,1478885036.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:56.811Z,1478885036.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:56.932Z,1478885036.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:57.180Z,1478885037.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:57.591Z,1478885037.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:57.728Z,1478885037.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:57.996Z,1478885037.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:58.417Z,1478885038.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:58.524Z,1478885038.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:58.784Z,1478885038.784 [PNI_TCM](ERROR): CRC does not match. Expected:0x19493 got:0x4926
2016-11-11T17:23:58.805Z,1478885038.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:59.184Z,1478885039.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:59.320Z,1478885039.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:59.589Z,1478885039.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:23:59.728Z,1478885039.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:23:59.988Z,1478885039.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:00.386Z,1478885040.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:00.524Z,1478885040.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:00.783Z,1478885040.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:01.193Z,1478885041.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:01.304Z,1478885041.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:01.596Z,1478885041.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:01.987Z,1478885041.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:02.100Z,1478885042.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:02.486Z,1478885042.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:02.820Z,1478885042.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:02.860Z,1478885042.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:03.186Z,1478885043.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:03.591Z,1478885043.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:03.656Z,1478885043.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:03.993Z,1478885043.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:04.452Z,1478885044.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:04.485Z,1478885044.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:04.788Z,1478885044.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:04.872Z,1478885044.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:05.210Z,1478885045.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:05.582Z,1478885045.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:05.668Z,1478885045.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:06.005Z,1478885046.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:06.444Z,1478885046.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:06.464Z,1478885046.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:06.774Z,1478885046.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:06.872Z,1478885046.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:07.181Z,1478885047.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:07.579Z,1478885047.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:07.668Z,1478885047.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:08.013Z,1478885048.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:08.436Z,1478885048.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:08.464Z,1478885048.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:08.790Z,1478885048.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:08.872Z,1478885048.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:09.197Z,1478885049.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:09.583Z,1478885049.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:09.668Z,1478885049.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:09.997Z,1478885049.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:10.381Z,1478885050.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:10.465Z,1478885050.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:10.789Z,1478885050.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:10.916Z,1478885050.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:11.193Z,1478885051.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:11.592Z,1478885051.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:11.712Z,1478885051.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:11.993Z,1478885051.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:12.372Z,1478885052.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:12.508Z,1478885052.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:12.779Z,1478885052.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:13.187Z,1478885053.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:13.288Z,1478885053.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:13.590Z,1478885053.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:13.997Z,1478885053.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:14.084Z,1478885054.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:14.401Z,1478885054.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:14.813Z,1478885054.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:14.880Z,1478885054.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:15.197Z,1478885055.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:15.300Z,1478885055.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:15.597Z,1478885055.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:15.998Z,1478885055.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:16.096Z,1478885056.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:16.427Z,1478885056.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:16.789Z,1478885056.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:16.852Z,1478885056.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:17.181Z,1478885057.181 [BPC1](ERROR): Failed to parse message.
2016-11-11T17:24:17.182Z,1478885057.181 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T17:24:17.182Z,1478885057.182 [BPC1] Data Fault, FailCount= 1
2016-11-11T17:24:17.182Z,1478885057.182 [BPC1](ERROR): Data Fault
2016-11-11T17:24:17.190Z,1478885057.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:17.210Z,1478885057.210 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T17:24:17.592Z,1478885057.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:17.648Z,1478885057.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:17.973Z,1478885057.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:18.413Z,1478885058.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:18.444Z,1478885058.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:18.478Z,1478885058.478 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:24:18.478Z,1478885058.478 [BPC1] No Fault, FailCount= 1
2016-11-11T17:24:18.856Z,1478885058.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:18.862Z,1478885058.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:19.219Z,1478885059.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:19.593Z,1478885059.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:19.652Z,1478885059.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:19.980Z,1478885059.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:20.403Z,1478885060.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:20.448Z,1478885060.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:20.788Z,1478885060.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:20.856Z,1478885060.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:21.190Z,1478885061.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:21.594Z,1478885061.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:21.652Z,1478885061.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:21.989Z,1478885061.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:22.409Z,1478885062.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:22.448Z,1478885062.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:22.785Z,1478885062.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:22.856Z,1478885062.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:23.179Z,1478885063.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:23.587Z,1478885063.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:23.652Z,1478885063.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:23.986Z,1478885063.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:24.393Z,1478885064.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:24.448Z,1478885064.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:24.798Z,1478885064.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:24.908Z,1478885064.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:25.191Z,1478885065.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:25.586Z,1478885065.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:25.704Z,1478885065.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:25.992Z,1478885065.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:26.391Z,1478885066.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:26.500Z,1478885066.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:26.857Z,1478885066.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:27.189Z,1478885067.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:27.252Z,1478885067.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:27.583Z,1478885067.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:27.989Z,1478885067.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:28.048Z,1478885068.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:28.385Z,1478885068.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:28.844Z,1478885068.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:28.854Z,1478885068.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:29.201Z,1478885069.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:29.252Z,1478885069.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:29.602Z,1478885069.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:29.995Z,1478885069.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:30.048Z,1478885070.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:30.419Z,1478885070.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:30.804Z,1478885070.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:30.817Z,1478885070.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:31.218Z,1478885071.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:31.580Z,1478885071.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:31.600Z,1478885071.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:32.015Z,1478885072.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:32.396Z,1478885072.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:32.426Z,1478885072.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:32.804Z,1478885072.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:32.807Z,1478885072.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:33.213Z,1478885073.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:33.595Z,1478885073.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:33.600Z,1478885073.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:33.997Z,1478885073.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:34.400Z,1478885074.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:34.412Z,1478885074.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:34.781Z,1478885074.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:34.808Z,1478885074.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:35.193Z,1478885075.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:35.592Z,1478885075.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:35.604Z,1478885075.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:35.999Z,1478885075.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:36.400Z,1478885076.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:36.410Z,1478885076.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:36.776Z,1478885076.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:36.836Z,1478885076.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:37.185Z,1478885077.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:37.584Z,1478885077.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:37.632Z,1478885077.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:37.989Z,1478885077.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:38.431Z,1478885078.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:38.455Z,1478885078.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:38.809Z,1478885078.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:38.892Z,1478885078.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:39.194Z,1478885079.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:39.688Z,1478885079.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:40.484Z,1478885080.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:41.236Z,1478885081.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:42.032Z,1478885082.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:42.560Z,1478885082.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:42.685Z,1478885082.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:42.830Z,1478885082.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:43.070Z,1478885083.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:43.240Z,1478885083.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:43.470Z,1478885083.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:43.841Z,1478885083.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:44.036Z,1478885084.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:44.247Z,1478885084.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:44.656Z,1478885084.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:44.768Z,1478885084.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:45.069Z,1478885085.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:45.517Z,1478885085.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:45.564Z,1478885085.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:45.837Z,1478885085.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:46.285Z,1478885086.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:46.360Z,1478885086.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:46.645Z,1478885086.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:46.788Z,1478885086.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:47.079Z,1478885087.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:47.438Z,1478885087.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:47.584Z,1478885087.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:47.871Z,1478885087.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:48.241Z,1478885088.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:48.380Z,1478885088.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:48.649Z,1478885088.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:48.788Z,1478885088.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:49.045Z,1478885089.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:49.455Z,1478885089.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:49.584Z,1478885089.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:49.860Z,1478885089.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:50.257Z,1478885090.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:50.380Z,1478885090.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:50.654Z,1478885090.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:50.788Z,1478885090.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:51.045Z,1478885091.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:51.437Z,1478885091.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:51.584Z,1478885091.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:51.884Z,1478885091.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:52.236Z,1478885092.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:52.381Z,1478885092.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:52.641Z,1478885092.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:52.840Z,1478885092.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:53.039Z,1478885093.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:53.449Z,1478885093.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:53.636Z,1478885093.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:53.845Z,1478885093.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:54.240Z,1478885094.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:54.432Z,1478885094.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:54.661Z,1478885094.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:55.058Z,1478885095.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:55.208Z,1478885095.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:55.459Z,1478885095.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:55.859Z,1478885095.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:56.004Z,1478885096.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:56.257Z,1478885096.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:56.632Z,1478885096.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:56.800Z,1478885096.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:57.032Z,1478885097.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:57.208Z,1478885097.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:57.445Z,1478885097.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:57.845Z,1478885097.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:58.004Z,1478885098.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:58.248Z,1478885098.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:58.640Z,1478885098.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:58.764Z,1478885098.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:59.049Z,1478885099.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:59.446Z,1478885099.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:24:59.560Z,1478885099.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:24:59.913Z,1478885099.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:00.321Z,1478885100.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:00.356Z,1478885100.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:00.692Z,1478885100.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:00.764Z,1478885100.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:01.054Z,1478885101.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:01.469Z,1478885101.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:01.560Z,1478885101.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:01.865Z,1478885101.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:02.306Z,1478885102.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:02.356Z,1478885102.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:02.663Z,1478885102.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:02.764Z,1478885102.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:03.068Z,1478885103.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:03.461Z,1478885103.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:03.560Z,1478885103.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:03.851Z,1478885103.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:04.280Z,1478885104.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:04.356Z,1478885104.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:04.660Z,1478885104.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:04.764Z,1478885104.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:05.058Z,1478885105.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:05.461Z,1478885105.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:05.560Z,1478885105.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:05.856Z,1478885105.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:06.261Z,1478885106.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:06.357Z,1478885106.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:06.652Z,1478885106.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:06.816Z,1478885106.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:07.051Z,1478885107.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:07.455Z,1478885107.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:07.612Z,1478885107.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:07.855Z,1478885107.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:08.254Z,1478885108.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:08.408Z,1478885108.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:08.653Z,1478885108.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:09.050Z,1478885109.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:09.180Z,1478885109.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:09.455Z,1478885109.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:09.847Z,1478885109.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:09.976Z,1478885109.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:10.244Z,1478885110.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:10.653Z,1478885110.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:10.772Z,1478885110.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:11.039Z,1478885111.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:11.184Z,1478885111.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:11.444Z,1478885111.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:11.844Z,1478885111.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:11.980Z,1478885111.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:12.302Z,1478885112.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:12.657Z,1478885112.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:12.720Z,1478885112.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:13.044Z,1478885113.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:13.466Z,1478885113.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:13.532Z,1478885113.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:13.897Z,1478885113.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:14.302Z,1478885114.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:14.328Z,1478885114.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:14.665Z,1478885114.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:14.736Z,1478885114.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:15.089Z,1478885115.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:15.444Z,1478885115.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:15.532Z,1478885115.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:15.873Z,1478885115.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:16.301Z,1478885116.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:16.328Z,1478885116.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:16.668Z,1478885116.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:16.736Z,1478885116.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:17.050Z,1478885117.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:17.440Z,1478885117.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:17.532Z,1478885117.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:17.858Z,1478885117.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:18.302Z,1478885118.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:18.328Z,1478885118.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:18.652Z,1478885118.652 [PNI_TCM](ERROR): CRC does not match. Expected:0x64117 got:0x14365
2016-11-11T17:25:18.670Z,1478885118.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:18.736Z,1478885118.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:19.061Z,1478885119.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:19.435Z,1478885119.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:19.532Z,1478885119.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:19.862Z,1478885119.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:20.245Z,1478885120.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:20.329Z,1478885120.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:20.642Z,1478885120.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:20.792Z,1478885120.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:21.042Z,1478885121.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:21.473Z,1478885121.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:21.588Z,1478885121.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:21.845Z,1478885121.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:22.242Z,1478885122.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:22.384Z,1478885122.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:22.646Z,1478885122.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:23.050Z,1478885123.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:23.164Z,1478885123.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:23.445Z,1478885123.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:23.848Z,1478885123.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:23.960Z,1478885123.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:24.253Z,1478885124.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:24.658Z,1478885124.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:24.756Z,1478885124.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:25.056Z,1478885125.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:25.172Z,1478885125.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:25.448Z,1478885125.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:25.835Z,1478885125.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:25.968Z,1478885125.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:26.294Z,1478885126.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:26.643Z,1478885126.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:26.740Z,1478885126.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:27.073Z,1478885127.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:27.452Z,1478885127.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:27.536Z,1478885127.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:27.861Z,1478885127.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:28.268Z,1478885128.268 [PNI_TCM](ERROR): CRC does not match. Expected:0x52496 got:0x7361
2016-11-11T17:25:28.332Z,1478885128.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:28.349Z,1478885128.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:28.644Z,1478885128.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:28.740Z,1478885128.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:29.050Z,1478885129.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:29.480Z,1478885129.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:29.536Z,1478885129.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:29.850Z,1478885129.850 [PNI_TCM](ERROR): CRC does not match. Expected:0x48951 got:0x41243
2016-11-11T17:25:29.887Z,1478885129.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:30.293Z,1478885130.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:30.332Z,1478885130.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:30.677Z,1478885130.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:30.740Z,1478885130.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:31.065Z,1478885131.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:31.433Z,1478885131.434 [PNI_TCM](ERROR): CRC does not match. Expected:0x41013 got:0x16854
2016-11-11T17:25:31.469Z,1478885131.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:31.536Z,1478885131.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:31.844Z,1478885131.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:32.294Z,1478885132.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:32.332Z,1478885132.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:32.666Z,1478885132.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:32.740Z,1478885132.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:33.034Z,1478885133.034 [PNI_TCM](ERROR): CRC does not match. Expected:0x61761 got:0x49152
2016-11-11T17:25:33.069Z,1478885133.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:33.443Z,1478885133.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:33.536Z,1478885133.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:33.844Z,1478885133.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:34.249Z,1478885134.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:34.333Z,1478885134.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:34.653Z,1478885134.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:34.792Z,1478885134.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:35.053Z,1478885135.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:35.451Z,1478885135.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:35.588Z,1478885135.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:35.863Z,1478885135.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:36.266Z,1478885136.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:36.386Z,1478885136.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:36.634Z,1478885136.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:37.036Z,1478885137.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:37.160Z,1478885137.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:37.441Z,1478885137.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:37.855Z,1478885137.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:37.956Z,1478885137.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:38.242Z,1478885138.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:38.653Z,1478885138.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:38.752Z,1478885138.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:39.055Z,1478885139.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:39.160Z,1478885139.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:39.448Z,1478885139.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:39.956Z,1478885139.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:40.676Z,1478885140.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:41.472Z,1478885141.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:42.268Z,1478885142.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:42.676Z,1478885142.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:43.057Z,1478885143.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:43.164Z,1478885143.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:43.472Z,1478885143.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:43.549Z,1478885143.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:43.981Z,1478885143.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:44.268Z,1478885144.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:44.374Z,1478885144.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:44.676Z,1478885144.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:44.773Z,1478885144.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:45.170Z,1478885145.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:45.472Z,1478885145.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:45.553Z,1478885145.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:45.966Z,1478885145.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:46.268Z,1478885146.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:46.357Z,1478885146.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:46.676Z,1478885146.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:46.752Z,1478885146.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:47.148Z,1478885147.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:47.472Z,1478885147.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:47.553Z,1478885147.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:47.949Z,1478885147.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:48.268Z,1478885148.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:48.369Z,1478885148.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:48.765Z,1478885148.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:48.812Z,1478885148.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:49.154Z,1478885149.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:49.558Z,1478885149.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:49.608Z,1478885149.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:49.960Z,1478885149.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:50.353Z,1478885150.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:50.404Z,1478885150.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:50.776Z,1478885150.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:51.137Z,1478885151.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:51.156Z,1478885151.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:51.565Z,1478885151.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:51.938Z,1478885151.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:51.952Z,1478885151.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:52.357Z,1478885152.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:52.748Z,1478885152.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:52.758Z,1478885152.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:53.156Z,1478885153.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:53.163Z,1478885153.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:53.565Z,1478885153.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:53.952Z,1478885153.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:53.957Z,1478885153.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:54.358Z,1478885154.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:54.636Z,1478885154.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:54.762Z,1478885154.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:55.146Z,1478885155.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:55.432Z,1478885155.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:55.539Z,1478885155.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:55.939Z,1478885155.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:56.229Z,1478885156.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:56.376Z,1478885156.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:56.684Z,1478885156.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:56.747Z,1478885156.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:57.201Z,1478885157.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:57.480Z,1478885157.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:57.562Z,1478885157.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:57.989Z,1478885157.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:58.276Z,1478885158.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:58.377Z,1478885158.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:58.684Z,1478885158.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:58.793Z,1478885158.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:59.170Z,1478885159.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:59.480Z,1478885159.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:25:59.542Z,1478885159.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:25:59.946Z,1478885159.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:00.276Z,1478885160.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:00.355Z,1478885160.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:00.684Z,1478885160.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:00.743Z,1478885160.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:01.146Z,1478885161.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:01.480Z,1478885161.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:01.551Z,1478885161.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:01.951Z,1478885161.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:02.289Z,1478885162.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:02.390Z,1478885162.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:02.754Z,1478885162.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:02.776Z,1478885162.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:03.166Z,1478885163.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:03.561Z,1478885163.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:03.572Z,1478885163.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:03.958Z,1478885163.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:04.339Z,1478885164.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:04.368Z,1478885164.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:04.746Z,1478885164.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:05.088Z,1478885165.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:05.146Z,1478885165.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:05.539Z,1478885165.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:05.884Z,1478885165.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:05.953Z,1478885165.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:06.341Z,1478885166.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:06.680Z,1478885166.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:06.748Z,1478885166.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:07.154Z,1478885167.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:07.187Z,1478885167.187 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T17:26:07.204Z,1478885167.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:07.558Z,1478885167.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:07.959Z,1478885167.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:07.000Z,1478885168.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:08.356Z,1478885168.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:08.616Z,1478885168.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:08.749Z,1478885168.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:09.145Z,1478885169.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:09.412Z,1478885169.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:09.560Z,1478885169.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:09.933Z,1478885169.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:10.209Z,1478885170.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:10.361Z,1478885170.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:10.616Z,1478885170.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:10.777Z,1478885170.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:11.147Z,1478885171.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:11.413Z,1478885171.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:11.562Z,1478885171.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:11.953Z,1478885171.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:12.208Z,1478885172.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:12.393Z,1478885172.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:12.616Z,1478885172.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:12.757Z,1478885172.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:13.169Z,1478885173.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:13.412Z,1478885173.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:13.577Z,1478885173.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:13.939Z,1478885173.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:14.208Z,1478885174.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:14.362Z,1478885174.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:14.616Z,1478885174.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:14.759Z,1478885174.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:15.168Z,1478885175.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:15.412Z,1478885175.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:15.541Z,1478885175.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:15.940Z,1478885175.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:16.208Z,1478885176.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:16.386Z,1478885176.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:16.736Z,1478885176.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:16.740Z,1478885176.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:17.142Z,1478885177.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:17.532Z,1478885177.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:17.542Z,1478885177.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:17.949Z,1478885177.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:18.328Z,1478885178.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:18.353Z,1478885178.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:18.742Z,1478885178.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:19.068Z,1478885179.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:19.168Z,1478885179.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:19.541Z,1478885179.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:19.864Z,1478885179.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:19.942Z,1478885179.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:20.345Z,1478885180.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:20.661Z,1478885180.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:20.761Z,1478885180.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:21.068Z,1478885181.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:21.145Z,1478885181.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:21.544Z,1478885181.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:21.866Z,1478885181.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:21.952Z,1478885181.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:22.345Z,1478885182.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:22.596Z,1478885182.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:22.741Z,1478885182.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:23.154Z,1478885183.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:23.392Z,1478885183.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:23.561Z,1478885183.561 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:23.561Z,1478885183.561 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 232
2016-11-11T17:26:23.561Z,1478885183.561 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:26:23.568Z,1478885183.568 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:23.568Z,1478885183.568 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 232
2016-11-11T17:26:23.568Z,1478885183.568 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:26:23.570Z,1478885183.570 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:23.570Z,1478885183.570 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 232
2016-11-11T17:26:23.570Z,1478885183.570 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:26:23.626Z,1478885183.626 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:26:23.627Z,1478885183.627 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:26:23.652Z,1478885183.652 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:26:23.982Z,1478885183.982 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:26:23.982Z,1478885183.982 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 232
2016-11-11T17:26:23.987Z,1478885183.987 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:26:23.987Z,1478885183.987 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 232
2016-11-11T17:26:23.988Z,1478885183.988 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:26:23.988Z,1478885183.988 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 232
2016-11-11T17:26:24.188Z,1478885184.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:24.364Z,1478885184.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:26:24.365Z,1478885184.365 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:26:24.365Z,1478885184.365 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:26:24.374Z,1478885184.374 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:26:24.375Z,1478885184.375 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:26:24.375Z,1478885184.375 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:26:24.384Z,1478885184.384 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:26:24.384Z,1478885184.384 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:26:24.384Z,1478885184.384 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:26:24.596Z,1478885184.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:24.745Z,1478885184.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:25.173Z,1478885185.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:25.392Z,1478885185.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:25.574Z,1478885185.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:25.943Z,1478885185.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:26.188Z,1478885186.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:26.386Z,1478885186.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:26.596Z,1478885186.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:26.750Z,1478885186.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:27.165Z,1478885187.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:27.392Z,1478885187.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:27.577Z,1478885187.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:27.957Z,1478885187.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:28.188Z,1478885188.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:28.354Z,1478885188.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:28.596Z,1478885188.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:28.745Z,1478885188.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:29.150Z,1478885189.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:29.392Z,1478885189.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:29.545Z,1478885189.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:29.940Z,1478885189.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:30.188Z,1478885190.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:30.349Z,1478885190.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:30.688Z,1478885190.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:30.753Z,1478885190.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:31.141Z,1478885191.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:31.484Z,1478885191.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:31.550Z,1478885191.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:31.955Z,1478885191.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:32.280Z,1478885192.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:32.361Z,1478885192.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:32.749Z,1478885192.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:33.048Z,1478885193.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:33.149Z,1478885193.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:33.549Z,1478885193.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:33.844Z,1478885193.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:33.952Z,1478885193.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:34.353Z,1478885194.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:34.640Z,1478885194.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:34.752Z,1478885194.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:35.048Z,1478885195.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:35.152Z,1478885195.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:35.553Z,1478885195.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:35.844Z,1478885195.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:35.952Z,1478885195.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:36.353Z,1478885196.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:36.576Z,1478885196.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:36.752Z,1478885196.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:37.152Z,1478885197.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:37.372Z,1478885197.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:37.553Z,1478885197.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:37.937Z,1478885197.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:38.168Z,1478885198.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:38.360Z,1478885198.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:38.576Z,1478885198.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:38.760Z,1478885198.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:38.769Z,1478885198.769 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T17:21:38.4Z
2016-11-11T17:26:38.769Z,1478885198.769 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T17:26:38.769Z,1478885198.769 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T17:26:39.169Z,1478885199.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:39.373Z,1478885199.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:40.168Z,1478885200.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:40.298Z,1478885200.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:40.588Z,1478885200.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:41.384Z,1478885201.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:42.180Z,1478885202.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:42.588Z,1478885202.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:43.384Z,1478885203.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:43.468Z,1478885203.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:43.534Z,1478885203.534 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0292.lzma
2016-11-11T17:26:43.613Z,1478885203.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:43.968Z,1478885203.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:44.180Z,1478885204.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:44.326Z,1478885204.326 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0292.lzma.bak
2016-11-11T17:26:44.326Z,1478885204.326 [DataOverHttps](INFO): SBD MOMSN=4555609
2016-11-11T17:26:44.417Z,1478885204.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:44.664Z,1478885204.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:45.460Z,1478885205.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:45.813Z,1478885205.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:45.977Z,1478885205.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:46.256Z,1478885206.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:47.036Z,1478885207.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:47.832Z,1478885207.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:48.628Z,1478885208.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:49.036Z,1478885209.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:49.347Z,1478885209.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:49.489Z,1478885209.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:49.832Z,1478885209.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:49.836Z,1478885209.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:50.236Z,1478885210.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:50.548Z,1478885210.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:50.639Z,1478885210.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:51.043Z,1478885211.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:51.344Z,1478885211.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:52.141Z,1478885212.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:52.560Z,1478885212.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:53.356Z,1478885213.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:54.152Z,1478885214.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:54.490Z,1478885214.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:54.537Z,1478885214.537 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20161111T044527/Express0293.lzma
2016-11-11T17:26:54.560Z,1478885214.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:54.606Z,1478885214.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:54.994Z,1478885214.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:55.329Z,1478885215.329 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0293.lzma.bak
2016-11-11T17:26:55.330Z,1478885215.330 [DataOverHttps](INFO): SBD MOMSN=4555611
2016-11-11T17:26:55.356Z,1478885215.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:55.405Z,1478885215.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:56.152Z,1478885216.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:56.572Z,1478885216.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:56.908Z,1478885216.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:56.917Z,1478885216.917 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T17:26:56.917Z,1478885216.917 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T17:26:56.917Z,1478885216.917 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T17:26:57.053Z,1478885217.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:26:57.368Z,1478885217.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:58.164Z,1478885218.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:58.660Z,1478885218.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:26:59.456Z,1478885219.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:00.252Z,1478885220.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:00.426Z,1478885220.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:00.585Z,1478885220.585 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T17:27:00.586Z,1478885220.586 [BPC1] Data Fault, FailCount= 1
2016-11-11T17:27:00.586Z,1478885220.586 [BPC1](ERROR): Data Fault
2016-11-11T17:27:00.609Z,1478885220.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:00.664Z,1478885220.664 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T17:27:00.957Z,1478885220.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:01.048Z,1478885221.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:01.375Z,1478885221.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:01.456Z,1478885221.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:01.766Z,1478885221.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:01.828Z,1478885221.828 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:27:01.828Z,1478885221.828 [BPC1] No Fault, FailCount= 1
2016-11-11T17:27:02.252Z,1478885222.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:02.258Z,1478885222.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:02.640Z,1478885222.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:02.943Z,1478885222.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:03.048Z,1478885223.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:03.381Z,1478885223.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:03.456Z,1478885223.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:03.752Z,1478885223.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:04.154Z,1478885224.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:04.252Z,1478885224.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:04.554Z,1478885224.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:04.660Z,1478885224.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:04.957Z,1478885224.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:05.357Z,1478885225.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:05.456Z,1478885225.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:05.755Z,1478885225.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:06.141Z,1478885226.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:06.252Z,1478885226.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:06.545Z,1478885226.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:06.945Z,1478885226.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:07.048Z,1478885227.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:07.345Z,1478885227.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:07.749Z,1478885227.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:07.844Z,1478885227.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:08.142Z,1478885228.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:08.545Z,1478885228.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:08.640Z,1478885228.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:08.976Z,1478885228.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:09.350Z,1478885229.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:09.436Z,1478885229.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:09.744Z,1478885229.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:10.145Z,1478885230.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:10.232Z,1478885230.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:10.544Z,1478885230.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:10.945Z,1478885230.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:11.028Z,1478885231.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:11.349Z,1478885231.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:11.745Z,1478885231.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:11.824Z,1478885231.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:12.157Z,1478885232.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:12.553Z,1478885232.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:12.620Z,1478885232.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:12.953Z,1478885232.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:13.341Z,1478885233.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:13.416Z,1478885233.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:13.749Z,1478885233.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:14.164Z,1478885234.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:14.212Z,1478885234.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:14.598Z,1478885234.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:15.008Z,1478885235.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:15.129Z,1478885235.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:15.514Z,1478885235.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:15.604Z,1478885235.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:15.849Z,1478885235.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:16.012Z,1478885236.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:16.250Z,1478885236.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:16.420Z,1478885236.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:16.649Z,1478885236.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:16.837Z,1478885236.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:17.039Z,1478885237.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:17.445Z,1478885237.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:17.632Z,1478885237.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:17.865Z,1478885237.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:18.233Z,1478885238.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:18.430Z,1478885238.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:18.638Z,1478885238.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:19.041Z,1478885239.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:19.224Z,1478885239.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:19.414Z,1478885239.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:19.842Z,1478885239.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:20.021Z,1478885240.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:20.234Z,1478885240.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:20.637Z,1478885240.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:20.817Z,1478885240.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:21.030Z,1478885241.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:21.447Z,1478885241.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:21.612Z,1478885241.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:21.814Z,1478885241.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:22.245Z,1478885242.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:22.408Z,1478885242.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:22.666Z,1478885242.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:22.820Z,1478885242.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:23.022Z,1478885243.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:23.232Z,1478885243.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:23.438Z,1478885243.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:23.644Z,1478885243.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:23.834Z,1478885243.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:24.053Z,1478885244.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:24.219Z,1478885244.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:24.464Z,1478885244.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:24.625Z,1478885244.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:24.872Z,1478885244.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:25.036Z,1478885245.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:25.440Z,1478885245.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:25.668Z,1478885245.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:25.790Z,1478885245.790 [NAL9602](INFO): SBD MO Status=0, MOMSN=351, MT Status=0, MTMSN=0
2016-11-11T17:27:25.790Z,1478885245.790 [NAL9602](INFO): No messages in MT queue
2016-11-11T17:27:25.862Z,1478885245.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:26.245Z,1478885246.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:26.464Z,1478885246.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:26.621Z,1478885246.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:26.872Z,1478885246.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:27.029Z,1478885247.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:27.446Z,1478885247.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:27.668Z,1478885247.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:27.823Z,1478885247.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:28.228Z,1478885248.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:28.465Z,1478885248.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:28.677Z,1478885248.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:28.952Z,1478885248.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:29.040Z,1478885249.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:29.412Z,1478885249.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:29.748Z,1478885249.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:29.880Z,1478885249.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:30.217Z,1478885250.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:30.544Z,1478885250.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:30.661Z,1478885250.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:30.965Z,1478885250.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:31.054Z,1478885251.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:31.380Z,1478885251.380 [NAL9602](INFO): Powering down
2016-11-11T17:27:31.454Z,1478885251.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:31.760Z,1478885251.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:31.836Z,1478885251.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:32.237Z,1478885252.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:32.492Z,1478885252.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:32.643Z,1478885252.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:33.047Z,1478885253.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:33.288Z,1478885253.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:33.447Z,1478885253.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:33.844Z,1478885253.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:34.084Z,1478885254.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:34.253Z,1478885254.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:34.520Z,1478885254.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:34.638Z,1478885254.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:35.033Z,1478885255.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:35.316Z,1478885255.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:35.422Z,1478885255.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:35.837Z,1478885255.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:36.113Z,1478885256.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:36.238Z,1478885256.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:36.524Z,1478885256.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:36.617Z,1478885256.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:37.025Z,1478885257.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:37.320Z,1478885257.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:37.433Z,1478885257.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:37.838Z,1478885257.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:38.116Z,1478885258.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:38.218Z,1478885258.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:38.524Z,1478885258.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:38.637Z,1478885258.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:39.036Z,1478885259.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:39.320Z,1478885259.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:39.442Z,1478885259.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:39.876Z,1478885259.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:40.117Z,1478885260.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:40.240Z,1478885260.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:40.568Z,1478885260.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:40.646Z,1478885260.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:41.025Z,1478885261.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:41.364Z,1478885261.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:41.434Z,1478885261.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:41.836Z,1478885261.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:42.160Z,1478885262.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:42.252Z,1478885262.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:42.645Z,1478885262.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:42.932Z,1478885262.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:43.065Z,1478885263.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:43.473Z,1478885263.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:43.728Z,1478885263.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:43.826Z,1478885263.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:44.257Z,1478885264.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:44.524Z,1478885264.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:44.633Z,1478885264.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:44.932Z,1478885264.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:45.068Z,1478885265.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:45.472Z,1478885265.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:45.728Z,1478885265.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:45.837Z,1478885265.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:46.227Z,1478885266.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:46.460Z,1478885266.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:46.645Z,1478885266.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:47.041Z,1478885267.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:47.256Z,1478885267.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:47.429Z,1478885267.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:47.830Z,1478885267.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:48.052Z,1478885268.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:48.229Z,1478885268.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:48.460Z,1478885268.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:48.619Z,1478885268.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:49.033Z,1478885269.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:49.256Z,1478885269.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:49.425Z,1478885269.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:49.825Z,1478885269.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:50.052Z,1478885270.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:50.233Z,1478885270.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:50.460Z,1478885270.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:50.625Z,1478885270.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:51.020Z,1478885271.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:51.256Z,1478885271.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:51.430Z,1478885271.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:51.829Z,1478885271.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:52.052Z,1478885272.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:52.233Z,1478885272.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:52.460Z,1478885272.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:52.629Z,1478885272.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:53.026Z,1478885273.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:53.256Z,1478885273.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:53.429Z,1478885273.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:53.822Z,1478885273.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:54.054Z,1478885274.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:54.237Z,1478885274.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:54.560Z,1478885274.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:54.623Z,1478885274.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:55.025Z,1478885275.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:55.357Z,1478885275.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:55.429Z,1478885275.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:55.824Z,1478885275.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:56.152Z,1478885276.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:56.231Z,1478885276.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:56.632Z,1478885276.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:56.896Z,1478885276.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:57.042Z,1478885277.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:57.454Z,1478885277.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:27:57.692Z,1478885277.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:58.488Z,1478885278.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:58.904Z,1478885278.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:27:59.700Z,1478885279.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:00.436Z,1478885280.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:00.909Z,1478885280.909 [BPC1](ERROR): Failed to receive battery data
2016-11-11T17:28:00.909Z,1478885280.909 [BPC1] Communications Fault, FailCount= 1
2016-11-11T17:28:00.909Z,1478885280.909 [BPC1](ERROR): Communications Fault
2016-11-11T17:28:00.952Z,1478885280.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:00.984Z,1478885280.984 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T17:28:01.061Z,1478885281.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:01.232Z,1478885281.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:01.453Z,1478885281.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:01.849Z,1478885281.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:01.868Z,1478885281.868 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:28:01.869Z,1478885281.869 [BPC1] No Fault, FailCount= 1
2016-11-11T17:28:02.028Z,1478885282.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:02.300Z,1478885282.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:02.436Z,1478885282.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:02.666Z,1478885282.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:03.044Z,1478885283.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:03.232Z,1478885283.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:03.439Z,1478885283.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:03.843Z,1478885283.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:04.028Z,1478885284.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:04.253Z,1478885284.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:04.436Z,1478885284.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:04.644Z,1478885284.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:05.045Z,1478885285.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:05.232Z,1478885285.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:05.444Z,1478885285.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:05.839Z,1478885285.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:06.028Z,1478885286.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:06.248Z,1478885286.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:06.436Z,1478885286.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:06.640Z,1478885286.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:07.044Z,1478885287.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:07.232Z,1478885287.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:07.491Z,1478885287.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:07.844Z,1478885287.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:08.028Z,1478885288.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:08.245Z,1478885288.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:08.508Z,1478885288.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:08.643Z,1478885288.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:09.044Z,1478885289.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:09.304Z,1478885289.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:09.440Z,1478885289.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:09.844Z,1478885289.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:10.100Z,1478885290.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:10.245Z,1478885290.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:10.645Z,1478885290.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:10.868Z,1478885290.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:11.045Z,1478885291.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:11.444Z,1478885291.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:11.664Z,1478885291.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:11.845Z,1478885291.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:12.249Z,1478885292.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:12.460Z,1478885292.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:12.669Z,1478885292.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:12.868Z,1478885292.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:13.041Z,1478885293.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:13.469Z,1478885293.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:13.664Z,1478885293.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:13.844Z,1478885293.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:14.240Z,1478885294.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:14.396Z,1478885294.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:14.669Z,1478885294.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:15.043Z,1478885295.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:15.192Z,1478885295.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:15.473Z,1478885295.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:15.877Z,1478885295.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:15.989Z,1478885295.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:16.245Z,1478885296.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:16.396Z,1478885296.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:16.649Z,1478885296.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:17.049Z,1478885297.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:17.192Z,1478885297.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:17.444Z,1478885297.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:17.848Z,1478885297.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:17.988Z,1478885297.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:18.248Z,1478885298.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:18.396Z,1478885298.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:18.644Z,1478885298.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:19.044Z,1478885299.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:19.192Z,1478885299.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:19.449Z,1478885299.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:19.845Z,1478885299.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:19.988Z,1478885299.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:20.240Z,1478885300.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:20.396Z,1478885300.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:20.645Z,1478885300.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:21.044Z,1478885301.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:21.192Z,1478885301.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:21.439Z,1478885301.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:21.849Z,1478885301.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:21.988Z,1478885301.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:22.272Z,1478885302.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:22.500Z,1478885302.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:22.645Z,1478885302.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:23.049Z,1478885303.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:23.296Z,1478885303.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:23.449Z,1478885303.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:23.844Z,1478885303.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:24.092Z,1478885304.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:24.283Z,1478885304.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:24.653Z,1478885304.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:24.864Z,1478885304.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:25.054Z,1478885305.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:25.449Z,1478885305.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:25.660Z,1478885305.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:25.853Z,1478885305.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:26.253Z,1478885306.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:26.456Z,1478885306.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:26.673Z,1478885306.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:26.864Z,1478885306.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:27.061Z,1478885307.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:27.453Z,1478885307.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:27.660Z,1478885307.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:27.877Z,1478885307.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:28.253Z,1478885308.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:28.400Z,1478885308.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:28.653Z,1478885308.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:29.069Z,1478885309.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:29.196Z,1478885309.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:29.453Z,1478885309.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:29.877Z,1478885309.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:29.992Z,1478885309.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:30.293Z,1478885310.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:30.400Z,1478885310.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:30.653Z,1478885310.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:31.048Z,1478885311.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:31.196Z,1478885311.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:31.451Z,1478885311.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:31.847Z,1478885311.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:31.992Z,1478885311.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:32.256Z,1478885312.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:32.400Z,1478885312.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:32.656Z,1478885312.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:33.059Z,1478885313.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:33.196Z,1478885313.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:33.456Z,1478885313.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:33.857Z,1478885313.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:33.992Z,1478885313.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:34.261Z,1478885314.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:34.400Z,1478885314.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:34.649Z,1478885314.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:35.061Z,1478885315.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:35.196Z,1478885315.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:35.446Z,1478885315.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:35.844Z,1478885315.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:35.992Z,1478885315.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:36.252Z,1478885316.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:36.468Z,1478885316.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:36.648Z,1478885316.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:37.046Z,1478885317.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:37.264Z,1478885317.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:37.453Z,1478885317.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:37.858Z,1478885317.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:38.060Z,1478885318.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:38.261Z,1478885318.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:38.653Z,1478885318.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:38.824Z,1478885318.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:39.057Z,1478885319.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:39.440Z,1478885319.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:39.620Z,1478885319.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:39.870Z,1478885319.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:40.241Z,1478885320.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:40.417Z,1478885320.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:40.673Z,1478885320.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:40.828Z,1478885320.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:41.047Z,1478885321.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:41.458Z,1478885321.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:41.624Z,1478885321.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:41.850Z,1478885321.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:42.259Z,1478885322.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:42.376Z,1478885322.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:42.681Z,1478885322.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:43.055Z,1478885323.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:43.172Z,1478885323.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:43.475Z,1478885323.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:43.845Z,1478885323.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:43.968Z,1478885323.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:44.296Z,1478885324.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:44.376Z,1478885324.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:44.678Z,1478885324.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:45.060Z,1478885325.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:45.172Z,1478885325.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:45.452Z,1478885325.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:45.859Z,1478885325.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:45.968Z,1478885325.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:46.268Z,1478885326.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:46.376Z,1478885326.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:46.640Z,1478885326.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:47.076Z,1478885327.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:47.172Z,1478885327.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:47.443Z,1478885327.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:47.848Z,1478885327.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:47.968Z,1478885327.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:48.255Z,1478885328.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:48.376Z,1478885328.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:48.650Z,1478885328.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:49.050Z,1478885329.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:49.173Z,1478885329.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:49.456Z,1478885329.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:49.861Z,1478885329.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:49.968Z,1478885329.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:50.250Z,1478885330.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:50.448Z,1478885330.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:50.656Z,1478885330.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:51.049Z,1478885331.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:51.244Z,1478885331.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:51.450Z,1478885331.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:51.849Z,1478885331.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:52.040Z,1478885332.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:52.257Z,1478885332.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:52.650Z,1478885332.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:52.804Z,1478885332.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:53.061Z,1478885333.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:53.461Z,1478885333.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:53.600Z,1478885333.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:53.856Z,1478885333.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:54.259Z,1478885334.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:54.396Z,1478885334.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:54.661Z,1478885334.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:54.804Z,1478885334.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:55.052Z,1478885335.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:55.477Z,1478885335.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:55.600Z,1478885335.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:55.884Z,1478885335.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:56.248Z,1478885336.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:56.368Z,1478885336.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:56.653Z,1478885336.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:57.070Z,1478885337.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:57.164Z,1478885337.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:57.461Z,1478885337.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:28:57.960Z,1478885337.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:58.368Z,1478885338.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:59.164Z,1478885339.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:28:59.960Z,1478885339.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:00.368Z,1478885340.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:00.918Z,1478885340.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:01.048Z,1478885341.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:01.164Z,1478885341.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:01.438Z,1478885341.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:01.888Z,1478885341.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:01.960Z,1478885341.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:02.229Z,1478885342.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:02.368Z,1478885342.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:02.609Z,1478885342.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:03.008Z,1478885343.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:03.164Z,1478885343.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:03.407Z,1478885343.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:03.811Z,1478885343.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:03.966Z,1478885343.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:04.216Z,1478885344.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:04.424Z,1478885344.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:04.611Z,1478885344.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:05.014Z,1478885345.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:05.220Z,1478885345.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:05.414Z,1478885345.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:05.821Z,1478885345.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:06.016Z,1478885346.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:06.220Z,1478885346.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:06.622Z,1478885346.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:06.784Z,1478885346.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:07.020Z,1478885347.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:07.423Z,1478885347.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:07.580Z,1478885347.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:07.825Z,1478885347.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:08.220Z,1478885348.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:08.376Z,1478885348.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:08.631Z,1478885348.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:08.784Z,1478885348.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:09.029Z,1478885349.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:09.409Z,1478885349.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:09.580Z,1478885349.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:09.813Z,1478885349.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:10.216Z,1478885350.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:10.344Z,1478885350.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:10.617Z,1478885350.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:11.017Z,1478885351.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:11.141Z,1478885351.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:11.415Z,1478885351.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:11.813Z,1478885351.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:11.936Z,1478885351.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:12.221Z,1478885352.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:12.344Z,1478885352.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:12.607Z,1478885352.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:13.041Z,1478885353.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:13.140Z,1478885353.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:13.411Z,1478885353.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:13.869Z,1478885353.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:13.936Z,1478885353.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:14.219Z,1478885354.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:14.344Z,1478885354.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:14.653Z,1478885354.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:15.010Z,1478885355.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:15.140Z,1478885355.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:15.438Z,1478885355.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:15.870Z,1478885355.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:15.936Z,1478885355.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:16.226Z,1478885356.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:16.344Z,1478885356.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:16.613Z,1478885356.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:17.009Z,1478885357.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:17.140Z,1478885357.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:17.411Z,1478885357.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:17.811Z,1478885357.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:17.937Z,1478885357.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:18.225Z,1478885358.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:18.404Z,1478885358.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:18.622Z,1478885358.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:19.014Z,1478885359.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:19.200Z,1478885359.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:19.420Z,1478885359.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:19.822Z,1478885359.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:19.996Z,1478885359.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:20.214Z,1478885360.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:20.622Z,1478885360.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:20.764Z,1478885360.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:21.013Z,1478885361.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:21.414Z,1478885361.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:21.560Z,1478885361.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:21.831Z,1478885361.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:22.228Z,1478885362.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:22.356Z,1478885362.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:22.609Z,1478885362.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:22.768Z,1478885362.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:23.007Z,1478885363.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:23.417Z,1478885363.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:23.564Z,1478885363.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:23.808Z,1478885363.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:24.217Z,1478885364.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:24.316Z,1478885364.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:24.617Z,1478885364.617 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:24.617Z,1478885364.617 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 233
2016-11-11T17:29:24.617Z,1478885364.617 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:29:24.624Z,1478885364.624 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:24.624Z,1478885364.624 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 233
2016-11-11T17:29:24.624Z,1478885364.624 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:29:24.626Z,1478885364.626 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:24.627Z,1478885364.626 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 233
2016-11-11T17:29:24.627Z,1478885364.627 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:29:24.672Z,1478885364.672 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:29:24.672Z,1478885364.672 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:29:24.672Z,1478885364.672 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:29:25.040Z,1478885365.040 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:29:25.041Z,1478885365.040 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 233
2016-11-11T17:29:25.041Z,1478885365.041 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:29:25.041Z,1478885365.041 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 233
2016-11-11T17:29:25.042Z,1478885365.042 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:29:25.042Z,1478885365.042 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 233
2016-11-11T17:29:25.112Z,1478885365.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:25.424Z,1478885365.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:29:25.424Z,1478885365.424 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:29:25.425Z,1478885365.425 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:29:25.442Z,1478885365.442 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:29:25.442Z,1478885365.442 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:29:25.442Z,1478885365.443 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:29:25.443Z,1478885365.443 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:29:25.443Z,1478885365.443 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:29:25.444Z,1478885365.444 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:29:25.835Z,1478885365.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:25.908Z,1478885365.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:26.217Z,1478885366.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:26.316Z,1478885366.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:26.657Z,1478885366.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:27.040Z,1478885367.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:27.112Z,1478885367.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:27.424Z,1478885367.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:27.887Z,1478885367.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:27.908Z,1478885367.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:28.210Z,1478885368.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:28.316Z,1478885368.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:28.614Z,1478885368.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:29.053Z,1478885369.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:29.112Z,1478885369.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:29.410Z,1478885369.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:29.873Z,1478885369.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:29.908Z,1478885369.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:30.255Z,1478885370.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:30.316Z,1478885370.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:30.621Z,1478885370.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:31.019Z,1478885371.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:31.112Z,1478885371.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:31.433Z,1478885371.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:31.832Z,1478885371.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:31.908Z,1478885371.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:32.214Z,1478885372.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:32.384Z,1478885372.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:32.621Z,1478885372.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:33.018Z,1478885373.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:33.180Z,1478885373.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:33.416Z,1478885373.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:33.818Z,1478885373.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:33.976Z,1478885373.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:34.225Z,1478885374.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:34.626Z,1478885374.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:34.752Z,1478885374.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:35.012Z,1478885375.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:35.407Z,1478885375.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:35.548Z,1478885375.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:35.819Z,1478885375.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:36.216Z,1478885376.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:36.344Z,1478885376.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:36.615Z,1478885376.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:36.752Z,1478885376.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:37.031Z,1478885377.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:37.409Z,1478885377.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:37.548Z,1478885377.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:37.883Z,1478885377.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:38.217Z,1478885378.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:38.312Z,1478885378.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:38.642Z,1478885378.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:39.024Z,1478885379.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:39.108Z,1478885379.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:39.419Z,1478885379.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:39.868Z,1478885379.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:39.904Z,1478885379.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:40.231Z,1478885380.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:40.312Z,1478885380.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:40.620Z,1478885380.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:41.054Z,1478885381.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:41.108Z,1478885381.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:41.425Z,1478885381.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:41.862Z,1478885381.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:41.904Z,1478885381.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:42.229Z,1478885382.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:42.316Z,1478885382.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:42.650Z,1478885382.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:43.026Z,1478885383.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:43.113Z,1478885383.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:43.445Z,1478885383.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:43.887Z,1478885383.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:43.908Z,1478885383.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:44.261Z,1478885384.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:44.328Z,1478885384.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:44.598Z,1478885384.598 [PNI_TCM](ERROR): CRC does not match. Expected:0x47079 got:0x15135
2016-11-11T17:29:44.650Z,1478885384.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:45.032Z,1478885385.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:45.124Z,1478885385.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:45.414Z,1478885385.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:45.811Z,1478885385.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:45.921Z,1478885385.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:46.215Z,1478885386.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:46.360Z,1478885386.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:46.633Z,1478885386.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:47.015Z,1478885387.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:47.156Z,1478885387.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:47.411Z,1478885387.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:47.821Z,1478885387.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:47.952Z,1478885387.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:48.225Z,1478885388.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:48.625Z,1478885388.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:48.744Z,1478885388.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:49.008Z,1478885389.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:49.410Z,1478885389.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:49.540Z,1478885389.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:49.834Z,1478885389.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:50.211Z,1478885390.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:50.336Z,1478885390.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:50.629Z,1478885390.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:50.744Z,1478885390.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:51.022Z,1478885391.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:51.421Z,1478885391.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:51.540Z,1478885391.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:51.873Z,1478885391.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:52.237Z,1478885392.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:52.296Z,1478885392.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:52.606Z,1478885392.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:53.032Z,1478885393.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:53.092Z,1478885393.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:53.402Z,1478885393.402 [PNI_TCM](ERROR): CRC does not match. Expected:0x25070 got:0x2331
2016-11-11T17:29:53.439Z,1478885393.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:53.888Z,1478885393.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:53.914Z,1478885393.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:54.216Z,1478885394.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:54.296Z,1478885394.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:54.642Z,1478885394.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:55.003Z,1478885395.003 [PNI_TCM](ERROR): CRC does not match. Expected:0x57420 got:0x24952
2016-11-11T17:29:55.045Z,1478885395.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:55.092Z,1478885395.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:55.428Z,1478885395.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:55.888Z,1478885395.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:55.910Z,1478885395.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:56.233Z,1478885396.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:56.296Z,1478885396.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:56.605Z,1478885396.605 [PNI_TCM](ERROR): CRC does not match. Expected:0x17175 got:0x49152
2016-11-11T17:29:56.658Z,1478885396.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:57.021Z,1478885397.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:57.092Z,1478885397.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:57.441Z,1478885397.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:57.876Z,1478885397.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:29:57.889Z,1478885397.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:58.296Z,1478885398.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:59.092Z,1478885399.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:29:59.889Z,1478885399.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:00.357Z,1478885400.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:01.152Z,1478885401.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:01.273Z,1478885401.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:01.405Z,1478885401.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:01.785Z,1478885401.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:01.948Z,1478885401.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:02.153Z,1478885402.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:02.551Z,1478885402.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:02.700Z,1478885402.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:02.957Z,1478885402.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:03.354Z,1478885403.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:03.496Z,1478885403.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:03.746Z,1478885403.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:04.152Z,1478885404.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:04.292Z,1478885404.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:04.553Z,1478885404.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:04.700Z,1478885404.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:04.948Z,1478885404.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:05.355Z,1478885405.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:05.496Z,1478885405.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:05.745Z,1478885405.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:06.160Z,1478885406.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:06.260Z,1478885406.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:06.561Z,1478885406.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:06.960Z,1478885406.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:07.056Z,1478885407.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:07.340Z,1478885407.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:07.745Z,1478885407.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:07.852Z,1478885407.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:08.152Z,1478885408.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:08.276Z,1478885408.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:08.556Z,1478885408.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:08.965Z,1478885408.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:09.072Z,1478885409.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:09.356Z,1478885409.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:09.794Z,1478885409.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:09.868Z,1478885409.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:10.141Z,1478885410.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:10.276Z,1478885410.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:10.570Z,1478885410.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:10.945Z,1478885410.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:11.072Z,1478885411.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:11.349Z,1478885411.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:11.740Z,1478885411.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:11.868Z,1478885411.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:12.152Z,1478885412.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:12.276Z,1478885412.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:12.574Z,1478885412.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:12.962Z,1478885412.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:13.072Z,1478885413.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:13.368Z,1478885413.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:13.749Z,1478885413.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:13.869Z,1478885413.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:14.173Z,1478885414.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:14.321Z,1478885414.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:14.555Z,1478885414.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:14.985Z,1478885414.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:15.116Z,1478885415.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:15.364Z,1478885415.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:15.781Z,1478885415.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:15.912Z,1478885415.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:16.177Z,1478885416.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:16.566Z,1478885416.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:16.696Z,1478885416.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:16.945Z,1478885416.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:17.349Z,1478885417.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:17.492Z,1478885417.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:17.749Z,1478885417.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:18.155Z,1478885418.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:18.288Z,1478885418.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:18.551Z,1478885418.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:18.696Z,1478885418.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:18.956Z,1478885418.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:19.352Z,1478885419.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:19.492Z,1478885419.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:19.781Z,1478885419.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:20.140Z,1478885420.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:20.244Z,1478885420.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:20.552Z,1478885420.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:20.948Z,1478885420.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:21.040Z,1478885421.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:21.347Z,1478885421.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:21.826Z,1478885421.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:21.836Z,1478885421.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:22.163Z,1478885422.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:22.268Z,1478885422.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:22.547Z,1478885422.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:22.947Z,1478885422.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:23.064Z,1478885423.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:23.362Z,1478885423.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:23.805Z,1478885423.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:23.860Z,1478885423.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:24.162Z,1478885424.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:24.268Z,1478885424.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:24.548Z,1478885424.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:24.956Z,1478885424.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:25.064Z,1478885425.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:25.354Z,1478885425.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:25.799Z,1478885425.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:25.860Z,1478885425.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:26.177Z,1478885426.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:26.268Z,1478885426.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:26.572Z,1478885426.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:26.997Z,1478885426.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:27.064Z,1478885427.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:27.351Z,1478885427.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:27.757Z,1478885427.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:27.861Z,1478885427.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:28.165Z,1478885428.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:28.300Z,1478885428.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:28.566Z,1478885428.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:28.957Z,1478885428.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:29.096Z,1478885429.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:29.396Z,1478885429.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:29.770Z,1478885429.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:29.892Z,1478885429.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:30.219Z,1478885430.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:30.570Z,1478885430.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:30.688Z,1478885430.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:30.960Z,1478885430.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:31.096Z,1478885431.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:31.361Z,1478885431.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:31.763Z,1478885431.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:31.892Z,1478885431.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:32.160Z,1478885432.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:32.564Z,1478885432.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:32.680Z,1478885432.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:32.957Z,1478885432.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:33.346Z,1478885433.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:33.476Z,1478885433.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:33.800Z,1478885433.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:34.158Z,1478885434.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:34.212Z,1478885434.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:34.568Z,1478885434.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:34.956Z,1478885434.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:35.008Z,1478885435.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:35.363Z,1478885435.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:35.804Z,1478885435.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:35.835Z,1478885435.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:36.153Z,1478885436.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:36.212Z,1478885436.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:36.557Z,1478885436.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:36.953Z,1478885436.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:37.008Z,1478885437.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:37.357Z,1478885437.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:37.802Z,1478885437.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:37.804Z,1478885437.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:38.164Z,1478885438.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:38.240Z,1478885438.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:38.529Z,1478885438.529 [PNI_TCM](ERROR): CRC does not match. Expected:0x15863 got:0x25607
2016-11-11T17:30:38.572Z,1478885438.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:38.954Z,1478885438.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:39.036Z,1478885439.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:39.365Z,1478885439.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:39.789Z,1478885439.789 [PNI_TCM](ERROR): CRC does not match. Expected:0x52422 got:0x35751
2016-11-11T17:30:39.821Z,1478885439.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:39.832Z,1478885439.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:40.150Z,1478885440.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:40.240Z,1478885440.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:40.549Z,1478885440.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:40.947Z,1478885440.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:41.036Z,1478885441.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:41.350Z,1478885441.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:41.748Z,1478885441.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:41.833Z,1478885441.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:42.149Z,1478885442.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:42.288Z,1478885442.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:42.605Z,1478885442.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:42.946Z,1478885442.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:43.084Z,1478885443.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:43.346Z,1478885443.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:43.781Z,1478885443.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:43.880Z,1478885443.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:44.145Z,1478885444.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:44.586Z,1478885444.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:44.648Z,1478885444.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:44.985Z,1478885444.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:45.345Z,1478885445.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:45.444Z,1478885445.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:45.751Z,1478885445.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:46.199Z,1478885446.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:46.240Z,1478885446.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:46.561Z,1478885446.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:46.680Z,1478885446.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:46.937Z,1478885446.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:47.361Z,1478885447.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:47.476Z,1478885447.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:47.794Z,1478885447.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:48.149Z,1478885448.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:48.244Z,1478885448.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:48.547Z,1478885448.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:48.953Z,1478885448.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:49.040Z,1478885449.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:49.347Z,1478885449.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:49.785Z,1478885449.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:49.836Z,1478885449.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:50.149Z,1478885450.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:50.244Z,1478885450.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:50.546Z,1478885450.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:50.953Z,1478885450.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:51.040Z,1478885451.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:51.346Z,1478885451.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:51.788Z,1478885451.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:51.836Z,1478885451.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:52.150Z,1478885452.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:52.244Z,1478885452.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:52.557Z,1478885452.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:52.952Z,1478885452.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:53.040Z,1478885453.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:53.346Z,1478885453.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:53.774Z,1478885453.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:53.836Z,1478885453.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:54.146Z,1478885454.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:54.244Z,1478885454.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:54.547Z,1478885454.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:54.947Z,1478885454.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:55.040Z,1478885455.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:55.354Z,1478885455.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:55.762Z,1478885455.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:55.836Z,1478885455.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:56.149Z,1478885456.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:56.284Z,1478885456.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:56.557Z,1478885456.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:56.997Z,1478885456.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:57.080Z,1478885457.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:57.336Z,1478885457.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:57.741Z,1478885457.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:57.876Z,1478885457.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:58.205Z,1478885458.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:30:58.656Z,1478885458.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:30:59.452Z,1478885459.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:00.248Z,1478885460.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:00.656Z,1478885460.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:01.452Z,1478885461.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:01.748Z,1478885461.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:01.909Z,1478885461.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:02.196Z,1478885462.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:02.301Z,1478885462.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:02.665Z,1478885462.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:02.992Z,1478885462.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:03.089Z,1478885463.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:03.463Z,1478885463.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:03.788Z,1478885463.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:03.895Z,1478885463.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:04.196Z,1478885464.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:04.270Z,1478885464.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:04.669Z,1478885464.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:04.992Z,1478885464.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:05.065Z,1478885465.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:05.467Z,1478885465.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:05.790Z,1478885465.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:05.882Z,1478885465.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:06.200Z,1478885466.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:06.276Z,1478885466.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:06.671Z,1478885466.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:06.999Z,1478885466.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:07.068Z,1478885467.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:07.473Z,1478885467.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:07.792Z,1478885467.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:07.879Z,1478885467.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:08.200Z,1478885468.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:08.277Z,1478885468.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:08.673Z,1478885468.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:08.996Z,1478885468.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:09.073Z,1478885469.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:09.476Z,1478885469.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:09.793Z,1478885469.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:09.891Z,1478885469.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:10.276Z,1478885470.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:10.279Z,1478885470.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:10.678Z,1478885470.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:11.072Z,1478885471.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:11.084Z,1478885471.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:11.477Z,1478885471.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:11.868Z,1478885471.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:11.882Z,1478885471.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:12.277Z,1478885472.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:12.588Z,1478885472.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:12.677Z,1478885472.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:13.062Z,1478885473.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:13.384Z,1478885473.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:13.479Z,1478885473.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:13.865Z,1478885473.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:14.181Z,1478885474.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:14.286Z,1478885474.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:14.600Z,1478885474.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:14.701Z,1478885474.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:15.072Z,1478885475.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:15.396Z,1478885475.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:15.502Z,1478885475.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:15.877Z,1478885475.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:16.132Z,1478885476.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:16.290Z,1478885476.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:16.689Z,1478885476.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:16.928Z,1478885476.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:17.078Z,1478885477.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:17.476Z,1478885477.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:17.724Z,1478885477.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:17.877Z,1478885477.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:18.132Z,1478885478.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:18.273Z,1478885478.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:18.672Z,1478885478.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:18.928Z,1478885478.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:19.082Z,1478885479.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:19.456Z,1478885479.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:19.724Z,1478885479.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:19.884Z,1478885479.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:20.132Z,1478885480.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:20.284Z,1478885480.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:20.661Z,1478885480.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:20.928Z,1478885480.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:21.056Z,1478885481.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:21.461Z,1478885481.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:21.725Z,1478885481.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:21.868Z,1478885481.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:22.136Z,1478885482.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:22.262Z,1478885482.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:22.667Z,1478885482.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:22.937Z,1478885482.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:23.069Z,1478885483.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:23.463Z,1478885483.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:23.732Z,1478885483.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:23.878Z,1478885483.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:24.212Z,1478885484.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:24.277Z,1478885484.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:24.681Z,1478885484.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:25.008Z,1478885485.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:25.069Z,1478885485.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:25.477Z,1478885485.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:25.804Z,1478885485.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:25.873Z,1478885485.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:26.277Z,1478885486.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:26.568Z,1478885486.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:26.665Z,1478885486.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:27.075Z,1478885487.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:27.364Z,1478885487.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:27.466Z,1478885487.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:27.874Z,1478885487.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:28.161Z,1478885488.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:28.269Z,1478885488.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:28.572Z,1478885488.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:28.689Z,1478885488.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:29.074Z,1478885489.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:29.368Z,1478885489.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:29.466Z,1478885489.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:29.871Z,1478885489.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:30.100Z,1478885490.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:30.273Z,1478885490.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:30.666Z,1478885490.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:30.896Z,1478885490.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:31.069Z,1478885491.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:31.465Z,1478885491.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:31.692Z,1478885491.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:31.868Z,1478885491.868 [BPC1](ERROR): Failed to receive battery data
2016-11-11T17:31:31.868Z,1478885491.868 [BPC1] Communications Fault, FailCount= 1
2016-11-11T17:31:31.868Z,1478885491.868 [BPC1](ERROR): Communications Fault
2016-11-11T17:31:31.877Z,1478885491.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:31.897Z,1478885491.897 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T17:31:32.120Z,1478885492.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:32.274Z,1478885492.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:32.676Z,1478885492.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:32.916Z,1478885492.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:33.068Z,1478885493.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:33.105Z,1478885493.105 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:31:33.105Z,1478885493.105 [BPC1] No Fault, FailCount= 1
2016-11-11T17:31:33.518Z,1478885493.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:33.712Z,1478885493.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:33.881Z,1478885493.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:34.120Z,1478885494.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:34.289Z,1478885494.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:34.675Z,1478885494.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:34.916Z,1478885494.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:35.077Z,1478885495.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:35.476Z,1478885495.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:35.713Z,1478885495.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:35.877Z,1478885495.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:36.120Z,1478885496.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:36.272Z,1478885496.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:36.656Z,1478885496.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:36.918Z,1478885496.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:37.065Z,1478885497.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:37.465Z,1478885497.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:37.712Z,1478885497.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:37.872Z,1478885497.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:38.192Z,1478885498.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:38.271Z,1478885498.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:38.662Z,1478885498.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:38.990Z,1478885498.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:39.064Z,1478885499.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:39.467Z,1478885499.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:39.784Z,1478885499.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:39.871Z,1478885499.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:40.265Z,1478885500.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:40.552Z,1478885500.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:40.667Z,1478885500.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:41.066Z,1478885501.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:41.348Z,1478885501.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:41.468Z,1478885501.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:41.873Z,1478885501.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:42.144Z,1478885502.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:42.268Z,1478885502.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:42.552Z,1478885502.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:42.664Z,1478885502.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:43.072Z,1478885503.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:43.348Z,1478885503.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:43.477Z,1478885503.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:43.876Z,1478885503.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:44.068Z,1478885504.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:44.276Z,1478885504.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:44.698Z,1478885504.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:44.864Z,1478885504.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:45.081Z,1478885505.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:45.461Z,1478885505.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:45.660Z,1478885505.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:45.894Z,1478885505.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:46.068Z,1478885506.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:46.305Z,1478885506.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:46.669Z,1478885506.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:46.864Z,1478885506.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:47.101Z,1478885507.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:47.463Z,1478885507.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:47.660Z,1478885507.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:47.905Z,1478885507.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:48.068Z,1478885508.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:48.263Z,1478885508.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:48.673Z,1478885508.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:48.864Z,1478885508.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:49.064Z,1478885509.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:49.469Z,1478885509.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:49.660Z,1478885509.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:49.872Z,1478885509.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:50.068Z,1478885510.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:50.266Z,1478885510.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:50.670Z,1478885510.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:50.864Z,1478885510.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:51.065Z,1478885511.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:51.469Z,1478885511.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:51.660Z,1478885511.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:51.872Z,1478885511.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:52.160Z,1478885512.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:52.264Z,1478885512.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:52.672Z,1478885512.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:52.956Z,1478885512.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:53.074Z,1478885513.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:53.469Z,1478885513.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:53.752Z,1478885513.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:53.875Z,1478885513.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:54.277Z,1478885514.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:54.520Z,1478885514.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:54.664Z,1478885514.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:55.069Z,1478885515.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:55.316Z,1478885515.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:55.473Z,1478885515.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:55.869Z,1478885515.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:56.112Z,1478885516.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:56.270Z,1478885516.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:56.520Z,1478885516.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:56.677Z,1478885516.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:57.074Z,1478885517.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:57.083Z,1478885517.083 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T17:31:57.083Z,1478885517.083 [Default:CheckIn:C.Wait] Stopped
2016-11-11T17:31:57.083Z,1478885517.083 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T17:31:57.083Z,1478885517.083 [Default:CheckIn:D] Running Loop=1
2016-11-11T17:31:57.316Z,1478885517.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:57.475Z,1478885517.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:57.484Z,1478885517.484 [Default:CheckIn:D] Stopped
2016-11-11T17:31:57.484Z,1478885517.484 [Default:CheckIn:E] Running Loop=1
2016-11-11T17:31:57.876Z,1478885517.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:57.885Z,1478885517.885 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 761.936198 min 
2016-11-11T17:31:57.885Z,1478885517.885 [Default:CheckIn:E] Stopped
2016-11-11T17:31:57.885Z,1478885517.885 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T17:31:57.885Z,1478885517.885 [Default:CheckIn] Stopped
2016-11-11T17:31:57.886Z,1478885517.886 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T17:31:57.886Z,1478885517.886 [Default:CheckIn](INFO): Running loop #74
2016-11-11T17:31:57.886Z,1478885517.886 [Default:CheckIn] Running Loop=74
2016-11-11T17:31:57.886Z,1478885517.886 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T17:31:57.886Z,1478885517.886 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T17:31:58.044Z,1478885518.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:58.282Z,1478885518.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:31:58.840Z,1478885518.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:31:59.637Z,1478885519.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:00.112Z,1478885520.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:00.908Z,1478885520.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:01.704Z,1478885521.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:02.114Z,1478885522.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:02.908Z,1478885522.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:03.704Z,1478885523.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:04.114Z,1478885524.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:04.908Z,1478885524.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:04.920Z,1478885524.921 [NAL9602](INFO): Powering up
2016-11-11T17:32:04.950Z,1478885524.950 [BPC1](ERROR): Failed to receive battery data
2016-11-11T17:32:04.950Z,1478885524.950 [BPC1] Communications Fault, FailCount= 1
2016-11-11T17:32:04.950Z,1478885524.950 [BPC1](ERROR): Communications Fault
2016-11-11T17:32:05.020Z,1478885525.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:05.077Z,1478885525.077 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T17:32:05.188Z,1478885525.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:05.561Z,1478885525.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:05.705Z,1478885525.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:05.974Z,1478885525.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:06.038Z,1478885526.038 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:32:06.038Z,1478885526.039 [BPC1] No Fault, FailCount= 1
2016-11-11T17:32:06.168Z,1478885526.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:06.438Z,1478885526.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:06.797Z,1478885526.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:06.964Z,1478885526.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:07.157Z,1478885527.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:07.550Z,1478885527.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:07.760Z,1478885527.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:07.961Z,1478885527.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:08.353Z,1478885528.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:08.512Z,1478885528.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:08.752Z,1478885528.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:09.172Z,1478885529.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:09.308Z,1478885529.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:09.556Z,1478885529.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:09.971Z,1478885529.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:10.104Z,1478885530.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:10.373Z,1478885530.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:10.580Z,1478885530.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:10.757Z,1478885530.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:11.164Z,1478885531.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:11.376Z,1478885531.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:11.613Z,1478885531.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:11.954Z,1478885531.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:12.064Z,1478885532.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:12.357Z,1478885532.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:12.754Z,1478885532.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:12.860Z,1478885532.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:13.179Z,1478885533.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:13.652Z,1478885533.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:13.656Z,1478885533.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:13.977Z,1478885533.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:14.093Z,1478885534.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:14.369Z,1478885534.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:14.780Z,1478885534.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:14.888Z,1478885534.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:15.165Z,1478885535.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:15.622Z,1478885535.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:15.684Z,1478885535.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:15.905Z,1478885535.905 [NAL9602](INFO): NAL9602 initialized
2016-11-11T17:32:15.969Z,1478885535.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:16.092Z,1478885536.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:16.351Z,1478885536.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:16.705Z,1478885536.705 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T17:32:16.705Z,1478885536.705 [NAL9602] Data Fault, FailCount= 1
2016-11-11T17:32:16.705Z,1478885536.705 [NAL9602](ERROR): Data Fault
2016-11-11T17:32:16.744Z,1478885536.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:16.832Z,1478885536.832 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T17:32:16.888Z,1478885536.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:17.105Z,1478885537.105 [NAL9602](INFO): Powering down
2016-11-11T17:32:17.195Z,1478885537.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:17.598Z,1478885537.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:17.684Z,1478885537.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:17.963Z,1478885537.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:18.048Z,1478885538.048 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T17:32:18.048Z,1478885538.048 [NAL9602] No Fault, FailCount= 1
2016-11-11T17:32:18.092Z,1478885538.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:18.358Z,1478885538.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:18.749Z,1478885538.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:18.888Z,1478885538.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:19.197Z,1478885539.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:19.568Z,1478885539.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:19.685Z,1478885539.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:19.993Z,1478885539.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:20.144Z,1478885540.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:20.382Z,1478885540.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:20.757Z,1478885540.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:20.940Z,1478885540.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:21.192Z,1478885541.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:21.591Z,1478885541.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:21.736Z,1478885541.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:21.939Z,1478885541.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:22.324Z,1478885542.324 [NAL9602](INFO): Powering up NAL9602
2016-11-11T17:32:22.393Z,1478885542.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:22.512Z,1478885542.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:22.767Z,1478885542.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:23.154Z,1478885543.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:23.308Z,1478885543.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:23.579Z,1478885543.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:23.973Z,1478885543.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:24.104Z,1478885544.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:24.362Z,1478885544.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:24.516Z,1478885544.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:24.746Z,1478885544.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:25.176Z,1478885545.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:25.312Z,1478885545.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:25.610Z,1478885545.610 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:25.610Z,1478885545.610 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 234
2016-11-11T17:32:25.610Z,1478885545.610 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:32:25.641Z,1478885545.641 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:25.641Z,1478885545.641 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 234
2016-11-11T17:32:25.641Z,1478885545.641 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:32:25.656Z,1478885545.656 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:25.656Z,1478885545.656 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 234
2016-11-11T17:32:25.656Z,1478885545.656 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:32:25.715Z,1478885545.716 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:32:25.716Z,1478885545.716 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:32:25.716Z,1478885545.716 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:32:26.056Z,1478885546.056 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:32:26.056Z,1478885546.056 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 234
2016-11-11T17:32:26.057Z,1478885546.057 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:32:26.057Z,1478885546.057 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 234
2016-11-11T17:32:26.058Z,1478885546.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:32:26.058Z,1478885546.058 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 234
2016-11-11T17:32:26.076Z,1478885546.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:26.366Z,1478885546.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:32:26.367Z,1478885546.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:32:26.371Z,1478885546.371 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:32:26.411Z,1478885546.411 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:32:26.412Z,1478885546.412 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:32:26.412Z,1478885546.412 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:32:26.412Z,1478885546.412 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:32:26.413Z,1478885546.413 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:32:26.413Z,1478885546.413 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:32:26.746Z,1478885546.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:26.872Z,1478885546.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:27.152Z,1478885547.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:27.645Z,1478885547.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:27.668Z,1478885547.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:27.984Z,1478885547.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:28.080Z,1478885548.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:28.373Z,1478885548.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:28.771Z,1478885548.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:28.876Z,1478885548.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:29.155Z,1478885549.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:29.621Z,1478885549.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:29.672Z,1478885549.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:29.973Z,1478885549.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:30.080Z,1478885550.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:30.344Z,1478885550.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:30.770Z,1478885550.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:30.876Z,1478885550.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:31.163Z,1478885551.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:31.615Z,1478885551.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:31.692Z,1478885551.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:31.961Z,1478885551.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:32.104Z,1478885552.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:32.341Z,1478885552.341 [PNI_TCM](ERROR): CRC does not match. Expected:0x57416 got:0x49579
2016-11-11T17:32:32.410Z,1478885552.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:32.748Z,1478885552.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:32.900Z,1478885552.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:33.165Z,1478885553.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:33.505Z,1478885553.505 [NAL9602](INFO): NAL9602 initialized
2016-11-11T17:32:33.593Z,1478885553.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:33.696Z,1478885553.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:33.941Z,1478885553.941 [PNI_TCM](ERROR): CRC does not match. Expected:0x37614 got:0x48635
2016-11-11T17:32:33.962Z,1478885553.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:34.112Z,1478885554.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:34.394Z,1478885554.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:34.750Z,1478885554.750 [PNI_TCM](ERROR): CRC does not match. Expected:0x37207 got:0x14101
2016-11-11T17:32:34.770Z,1478885554.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:34.908Z,1478885554.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:35.194Z,1478885555.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:35.586Z,1478885555.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:35.704Z,1478885555.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:35.965Z,1478885555.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:36.358Z,1478885556.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:36.476Z,1478885556.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:36.775Z,1478885556.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:37.160Z,1478885557.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:37.272Z,1478885557.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:37.577Z,1478885557.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:37.949Z,1478885557.949 [PNI_TCM](ERROR): CRC does not match. Expected:0x16354 got:0x25166
2016-11-11T17:32:37.970Z,1478885557.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:38.068Z,1478885558.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:38.348Z,1478885558.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:38.476Z,1478885558.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:38.746Z,1478885558.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:39.161Z,1478885559.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:39.272Z,1478885559.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:39.605Z,1478885559.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:39.939Z,1478885559.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:40.020Z,1478885560.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:40.349Z,1478885560.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:40.769Z,1478885560.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:40.816Z,1478885560.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:41.147Z,1478885561.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:41.601Z,1478885561.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:41.612Z,1478885561.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:41.979Z,1478885561.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:42.040Z,1478885562.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:42.369Z,1478885562.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:42.765Z,1478885562.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:42.836Z,1478885562.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:43.139Z,1478885563.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:43.614Z,1478885563.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:43.632Z,1478885563.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:43.961Z,1478885563.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:44.040Z,1478885564.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:44.363Z,1478885564.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:44.746Z,1478885564.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:44.836Z,1478885564.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:45.156Z,1478885565.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:45.598Z,1478885565.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:45.632Z,1478885565.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:45.952Z,1478885565.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:46.040Z,1478885566.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:46.397Z,1478885566.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:46.763Z,1478885566.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:46.836Z,1478885566.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:47.161Z,1478885567.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:47.572Z,1478885567.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:47.633Z,1478885567.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:47.985Z,1478885567.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:48.092Z,1478885568.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:48.344Z,1478885568.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:48.742Z,1478885568.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:48.888Z,1478885568.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:49.178Z,1478885569.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:49.545Z,1478885569.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:49.684Z,1478885569.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:50.005Z,1478885570.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:50.381Z,1478885570.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:50.476Z,1478885570.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:50.769Z,1478885570.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:51.149Z,1478885571.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:51.272Z,1478885571.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:51.548Z,1478885571.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:51.986Z,1478885571.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:52.068Z,1478885572.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:52.365Z,1478885572.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:52.476Z,1478885572.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:52.756Z,1478885572.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:53.165Z,1478885573.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:53.272Z,1478885573.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:53.598Z,1478885573.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:53.959Z,1478885573.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:54.024Z,1478885574.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:54.336Z,1478885574.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:54.741Z,1478885574.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:54.820Z,1478885574.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:55.152Z,1478885575.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:55.586Z,1478885575.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:55.616Z,1478885575.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:55.947Z,1478885575.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:56.024Z,1478885576.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:56.345Z,1478885576.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:56.746Z,1478885576.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:56.820Z,1478885576.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:57.159Z,1478885577.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:57.570Z,1478885577.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:57.616Z,1478885577.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:57.973Z,1478885577.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:58.024Z,1478885578.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:58.363Z,1478885578.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:32:58.820Z,1478885578.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:32:59.616Z,1478885579.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:00.024Z,1478885580.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:00.820Z,1478885580.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:01.617Z,1478885581.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:01.858Z,1478885581.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:01.988Z,1478885581.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:02.068Z,1478885582.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:02.414Z,1478885582.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:02.781Z,1478885582.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:02.864Z,1478885582.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:03.182Z,1478885583.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:03.620Z,1478885583.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:03.660Z,1478885583.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:04.012Z,1478885584.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:04.389Z,1478885584.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:04.448Z,1478885584.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:04.797Z,1478885584.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:05.162Z,1478885585.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:05.244Z,1478885585.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:05.560Z,1478885585.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:06.024Z,1478885586.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:06.040Z,1478885586.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:06.357Z,1478885586.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:06.448Z,1478885586.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:06.757Z,1478885586.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:07.160Z,1478885587.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:07.244Z,1478885587.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:07.598Z,1478885587.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:07.946Z,1478885587.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:07.966Z,1478885587.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:08.372Z,1478885588.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:08.741Z,1478885588.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:08.776Z,1478885588.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:09.169Z,1478885589.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:09.537Z,1478885589.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:09.595Z,1478885589.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:09.977Z,1478885589.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:09.980Z,1478885589.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:10.352Z,1478885590.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:10.755Z,1478885590.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:10.776Z,1478885590.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:11.157Z,1478885591.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:11.572Z,1478885591.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:11.596Z,1478885591.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:11.961Z,1478885591.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:11.980Z,1478885591.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:12.364Z,1478885592.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:12.771Z,1478885592.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:12.776Z,1478885592.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:13.174Z,1478885593.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:13.572Z,1478885593.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:13.584Z,1478885593.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:13.978Z,1478885593.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:13.980Z,1478885593.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:14.366Z,1478885594.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:14.766Z,1478885594.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:14.776Z,1478885594.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:15.172Z,1478885595.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:15.572Z,1478885595.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:15.625Z,1478885595.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:15.946Z,1478885595.946 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T17:33:15.946Z,1478885595.946 [BPC1] Data Fault, FailCount= 1
2016-11-11T17:33:15.946Z,1478885595.946 [BPC1](ERROR): Data Fault
2016-11-11T17:33:15.955Z,1478885595.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:15.000Z,1478885596.000 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T17:33:16.056Z,1478885596.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:16.364Z,1478885596.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:16.765Z,1478885596.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:16.852Z,1478885596.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:17.156Z,1478885597.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:17.196Z,1478885597.196 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:33:17.196Z,1478885597.196 [BPC1] No Fault, FailCount= 1
2016-11-11T17:33:17.635Z,1478885597.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:17.648Z,1478885597.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:18.042Z,1478885598.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:18.373Z,1478885598.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:18.440Z,1478885598.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:18.773Z,1478885598.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:19.177Z,1478885599.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:19.236Z,1478885599.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:19.568Z,1478885599.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:20.002Z,1478885600.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:20.032Z,1478885600.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:20.364Z,1478885600.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:20.448Z,1478885600.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:20.769Z,1478885600.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:21.162Z,1478885601.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:21.244Z,1478885601.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:21.575Z,1478885601.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:21.912Z,1478885601.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:21.966Z,1478885601.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:22.362Z,1478885602.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:22.708Z,1478885602.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:22.773Z,1478885602.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:23.174Z,1478885603.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:23.505Z,1478885603.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:23.588Z,1478885603.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:23.912Z,1478885603.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:23.984Z,1478885603.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:24.376Z,1478885604.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:24.708Z,1478885604.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:24.774Z,1478885604.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:25.189Z,1478885605.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:25.504Z,1478885605.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:25.570Z,1478885605.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:25.912Z,1478885605.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:25.965Z,1478885605.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:26.365Z,1478885606.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:26.708Z,1478885606.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:26.772Z,1478885606.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:27.163Z,1478885607.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:27.504Z,1478885607.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:27.569Z,1478885607.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:27.912Z,1478885607.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:27.985Z,1478885607.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:28.370Z,1478885608.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:28.708Z,1478885608.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:28.782Z,1478885608.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:29.169Z,1478885609.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:29.504Z,1478885609.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:29.616Z,1478885609.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:30.009Z,1478885610.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:30.048Z,1478885610.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:30.356Z,1478885610.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:30.756Z,1478885610.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:30.844Z,1478885610.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:31.193Z,1478885611.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:31.558Z,1478885611.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:31.640Z,1478885611.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:32.021Z,1478885612.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:32.389Z,1478885612.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:32.396Z,1478885612.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:32.772Z,1478885612.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:33.159Z,1478885613.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:33.192Z,1478885613.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:33.570Z,1478885613.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:33.988Z,1478885613.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:34.020Z,1478885614.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:34.362Z,1478885614.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:34.416Z,1478885614.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:34.770Z,1478885614.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:35.169Z,1478885615.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:35.212Z,1478885615.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:35.568Z,1478885615.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:35.892Z,1478885615.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:35.970Z,1478885615.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:36.369Z,1478885616.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:36.688Z,1478885616.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:36.767Z,1478885616.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:37.187Z,1478885617.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:37.484Z,1478885617.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:37.587Z,1478885617.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:37.892Z,1478885617.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:37.977Z,1478885617.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:38.353Z,1478885618.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:38.688Z,1478885618.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:38.761Z,1478885618.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:39.158Z,1478885619.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:39.484Z,1478885619.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:39.582Z,1478885619.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:39.892Z,1478885619.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:39.964Z,1478885619.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:40.359Z,1478885620.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:40.688Z,1478885620.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:40.767Z,1478885620.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:41.169Z,1478885621.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:41.484Z,1478885621.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:41.574Z,1478885621.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:41.892Z,1478885621.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:41.984Z,1478885621.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:42.365Z,1478885622.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:42.688Z,1478885622.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:42.772Z,1478885622.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:43.193Z,1478885623.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:43.484Z,1478885623.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:43.625Z,1478885623.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:43.958Z,1478885623.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:44.040Z,1478885624.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:44.393Z,1478885624.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:44.765Z,1478885624.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:44.836Z,1478885624.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:45.165Z,1478885625.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:45.601Z,1478885625.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:45.632Z,1478885625.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:46.005Z,1478885626.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:46.356Z,1478885626.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:46.402Z,1478885626.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:46.775Z,1478885626.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:47.153Z,1478885627.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:47.191Z,1478885627.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:47.561Z,1478885627.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:47.948Z,1478885627.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:48.003Z,1478885628.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:48.370Z,1478885628.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:48.384Z,1478885628.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:48.762Z,1478885628.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:49.171Z,1478885629.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:49.180Z,1478885629.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:49.562Z,1478885629.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:49.872Z,1478885629.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:49.968Z,1478885629.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:50.373Z,1478885630.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:50.668Z,1478885630.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:50.775Z,1478885630.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:51.186Z,1478885631.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:51.464Z,1478885631.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:51.577Z,1478885631.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:51.872Z,1478885631.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:51.982Z,1478885631.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:52.377Z,1478885632.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:52.668Z,1478885632.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:52.805Z,1478885632.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:53.160Z,1478885633.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:53.464Z,1478885633.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:53.563Z,1478885633.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:53.872Z,1478885633.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:53.959Z,1478885633.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:54.369Z,1478885634.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:54.668Z,1478885634.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:54.767Z,1478885634.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:55.178Z,1478885635.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:55.464Z,1478885635.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:55.568Z,1478885635.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:55.872Z,1478885635.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:55.977Z,1478885635.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:56.385Z,1478885636.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:56.668Z,1478885636.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:56.777Z,1478885636.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:57.174Z,1478885637.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:57.464Z,1478885637.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:57.600Z,1478885637.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:57.981Z,1478885637.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:58.028Z,1478885638.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:58.370Z,1478885638.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:33:58.824Z,1478885638.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:33:59.620Z,1478885639.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:00.336Z,1478885640.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:01.132Z,1478885641.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:01.814Z,1478885641.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:01.928Z,1478885641.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:02.016Z,1478885642.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:02.340Z,1478885642.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:02.429Z,1478885642.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:02.809Z,1478885642.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:03.136Z,1478885643.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:03.233Z,1478885643.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:03.627Z,1478885643.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:03.852Z,1478885643.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:03.997Z,1478885643.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:04.402Z,1478885644.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:04.648Z,1478885644.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:04.797Z,1478885644.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:05.193Z,1478885645.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:05.444Z,1478885645.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:05.600Z,1478885645.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:05.852Z,1478885645.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:06.001Z,1478885646.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:06.401Z,1478885646.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:06.648Z,1478885646.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:06.806Z,1478885646.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:07.201Z,1478885647.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:07.444Z,1478885647.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:07.614Z,1478885647.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:07.852Z,1478885647.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:08.006Z,1478885648.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:08.404Z,1478885648.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:08.648Z,1478885648.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:08.801Z,1478885648.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:09.200Z,1478885649.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:09.444Z,1478885649.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:09.613Z,1478885649.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:09.852Z,1478885649.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:10.005Z,1478885650.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:10.404Z,1478885650.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:10.648Z,1478885650.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:10.803Z,1478885650.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:11.206Z,1478885651.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:11.444Z,1478885651.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:11.609Z,1478885651.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:11.952Z,1478885651.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:12.021Z,1478885652.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:12.417Z,1478885652.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:12.748Z,1478885652.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:12.825Z,1478885652.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:13.219Z,1478885653.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:13.548Z,1478885653.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:13.595Z,1478885653.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:13.992Z,1478885653.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:14.300Z,1478885654.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:14.405Z,1478885654.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:14.803Z,1478885654.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:15.096Z,1478885655.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:15.241Z,1478885655.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:15.614Z,1478885655.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:15.893Z,1478885655.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:16.002Z,1478885656.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:16.300Z,1478885656.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:16.400Z,1478885656.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:16.817Z,1478885656.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:17.096Z,1478885657.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:17.212Z,1478885657.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:17.648Z,1478885657.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:17.836Z,1478885657.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:18.045Z,1478885658.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:18.415Z,1478885658.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:18.634Z,1478885658.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:18.801Z,1478885658.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:19.207Z,1478885659.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:19.428Z,1478885659.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:19.604Z,1478885659.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:19.836Z,1478885659.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:20.004Z,1478885660.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:20.403Z,1478885660.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:20.632Z,1478885660.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:20.797Z,1478885660.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:21.209Z,1478885661.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:21.428Z,1478885661.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:21.612Z,1478885661.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:21.836Z,1478885661.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:22.013Z,1478885662.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:22.399Z,1478885662.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:22.632Z,1478885662.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:22.794Z,1478885662.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:23.199Z,1478885663.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:23.428Z,1478885663.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:23.607Z,1478885663.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:23.836Z,1478885663.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:23.997Z,1478885663.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:24.401Z,1478885664.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:24.632Z,1478885664.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:24.801Z,1478885664.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:25.201Z,1478885665.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:25.428Z,1478885665.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:25.601Z,1478885665.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:25.920Z,1478885665.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:26.000Z,1478885666.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:26.397Z,1478885666.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:26.716Z,1478885666.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:26.805Z,1478885666.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:27.197Z,1478885667.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:27.512Z,1478885667.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:27.612Z,1478885667.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:28.014Z,1478885668.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:28.280Z,1478885668.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:28.419Z,1478885668.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:28.805Z,1478885668.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:29.076Z,1478885669.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:29.186Z,1478885669.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:29.597Z,1478885669.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:29.873Z,1478885669.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:30.050Z,1478885670.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:30.288Z,1478885670.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:30.445Z,1478885670.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:30.798Z,1478885670.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:31.084Z,1478885671.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:31.197Z,1478885671.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:31.635Z,1478885671.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:31.812Z,1478885671.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:32.002Z,1478885672.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:32.434Z,1478885672.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:32.608Z,1478885672.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:32.840Z,1478885672.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:33.205Z,1478885673.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:33.415Z,1478885673.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:33.609Z,1478885673.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:33.824Z,1478885673.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:34.009Z,1478885674.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:34.400Z,1478885674.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:34.620Z,1478885674.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:34.809Z,1478885674.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:35.205Z,1478885675.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:35.416Z,1478885675.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:35.605Z,1478885675.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:35.824Z,1478885675.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:36.001Z,1478885676.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:36.391Z,1478885676.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:36.620Z,1478885676.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:36.805Z,1478885676.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:37.189Z,1478885677.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:37.416Z,1478885677.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:37.623Z,1478885677.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:37.824Z,1478885677.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:38.015Z,1478885678.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:38.398Z,1478885678.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:38.620Z,1478885678.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:38.805Z,1478885678.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:39.195Z,1478885679.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:39.416Z,1478885679.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:39.601Z,1478885679.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:39.900Z,1478885679.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:39.993Z,1478885679.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:40.400Z,1478885680.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:40.696Z,1478885680.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:40.791Z,1478885680.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:41.201Z,1478885681.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:41.492Z,1478885681.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:41.602Z,1478885681.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:41.000Z,1478885682.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:42.260Z,1478885682.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:42.403Z,1478885682.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:42.801Z,1478885682.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:43.056Z,1478885683.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:43.210Z,1478885683.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:43.606Z,1478885683.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:43.852Z,1478885683.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:44.007Z,1478885684.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:44.260Z,1478885684.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:44.412Z,1478885684.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:44.861Z,1478885684.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:45.056Z,1478885685.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:45.197Z,1478885685.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:45.597Z,1478885685.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:45.788Z,1478885685.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:46.035Z,1478885686.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:46.392Z,1478885686.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:46.584Z,1478885686.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:46.830Z,1478885686.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:47.234Z,1478885687.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:47.380Z,1478885687.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:47.599Z,1478885687.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:47.788Z,1478885687.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:47.994Z,1478885687.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:48.406Z,1478885688.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:48.584Z,1478885688.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:48.809Z,1478885688.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:49.213Z,1478885689.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:49.381Z,1478885689.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:49.621Z,1478885689.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:49.792Z,1478885689.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:50.009Z,1478885690.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:50.411Z,1478885690.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:50.588Z,1478885690.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:50.784Z,1478885690.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:51.193Z,1478885691.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:51.384Z,1478885691.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:51.620Z,1478885691.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:51.792Z,1478885691.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:51.991Z,1478885691.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:52.397Z,1478885692.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:52.588Z,1478885692.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:52.791Z,1478885692.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:53.201Z,1478885693.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:53.384Z,1478885693.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:53.607Z,1478885693.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:53.880Z,1478885693.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:54.005Z,1478885694.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:54.406Z,1478885694.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:54.678Z,1478885694.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:54.809Z,1478885694.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:55.204Z,1478885695.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:55.472Z,1478885695.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:55.605Z,1478885695.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:55.996Z,1478885695.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:56.240Z,1478885696.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:56.405Z,1478885696.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:56.809Z,1478885696.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:57.036Z,1478885697.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:57.205Z,1478885697.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:57.593Z,1478885697.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:57.832Z,1478885697.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:57.993Z,1478885697.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:58.240Z,1478885698.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:58.392Z,1478885698.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:34:59.036Z,1478885699.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:34:59.784Z,1478885699.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:00.580Z,1478885700.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:01.376Z,1478885701.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:01.784Z,1478885701.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:01.898Z,1478885701.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:02.034Z,1478885702.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:02.403Z,1478885702.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:02.580Z,1478885702.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:02.838Z,1478885702.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:03.189Z,1478885703.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:03.377Z,1478885703.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:03.625Z,1478885703.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:03.788Z,1478885703.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:04.018Z,1478885704.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:04.387Z,1478885704.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:04.584Z,1478885704.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:04.795Z,1478885704.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:05.186Z,1478885705.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:05.380Z,1478885705.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:05.598Z,1478885705.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:05.788Z,1478885705.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:05.993Z,1478885705.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:06.393Z,1478885706.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:06.584Z,1478885706.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:06.799Z,1478885706.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:07.209Z,1478885707.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:07.380Z,1478885707.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:07.609Z,1478885707.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:07.880Z,1478885707.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:07.998Z,1478885707.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:08.397Z,1478885708.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:08.676Z,1478885708.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:08.802Z,1478885708.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:09.197Z,1478885709.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:09.472Z,1478885709.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:09.605Z,1478885709.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:09.985Z,1478885709.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:10.228Z,1478885710.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:10.397Z,1478885710.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:10.785Z,1478885710.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:11.024Z,1478885711.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:11.189Z,1478885711.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:11.588Z,1478885711.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:11.820Z,1478885711.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:11.999Z,1478885711.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:12.228Z,1478885712.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:12.396Z,1478885712.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:12.801Z,1478885712.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:13.024Z,1478885713.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:13.201Z,1478885713.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:13.591Z,1478885713.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:13.744Z,1478885713.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:13.986Z,1478885713.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:14.392Z,1478885714.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:14.540Z,1478885714.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:14.794Z,1478885714.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:15.192Z,1478885715.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:15.336Z,1478885715.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:15.593Z,1478885715.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:15.744Z,1478885715.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:16.041Z,1478885716.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:16.381Z,1478885716.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:16.540Z,1478885716.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:16.825Z,1478885716.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:17.214Z,1478885717.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:17.336Z,1478885717.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:17.617Z,1478885717.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:17.752Z,1478885717.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:17.997Z,1478885717.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:18.429Z,1478885718.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:18.548Z,1478885718.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:18.797Z,1478885718.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:19.197Z,1478885719.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:19.344Z,1478885719.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:19.581Z,1478885719.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:19.752Z,1478885719.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:19.981Z,1478885719.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:20.405Z,1478885720.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:20.548Z,1478885720.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:20.780Z,1478885720.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:21.189Z,1478885721.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:21.344Z,1478885721.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:21.584Z,1478885721.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:21.844Z,1478885721.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:21.984Z,1478885721.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:22.397Z,1478885722.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:22.640Z,1478885722.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:22.801Z,1478885722.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:23.205Z,1478885723.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:23.436Z,1478885723.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:23.594Z,1478885723.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:23.992Z,1478885723.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:24.192Z,1478885724.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:24.396Z,1478885724.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:24.785Z,1478885724.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:24.988Z,1478885724.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:25.190Z,1478885725.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:25.587Z,1478885725.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:25.785Z,1478885725.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:25.997Z,1478885725.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:26.196Z,1478885726.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:26.386Z,1478885726.386 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:26.386Z,1478885726.386 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 235
2016-11-11T17:35:26.386Z,1478885726.386 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:35:26.407Z,1478885726.407 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:35:26.801Z,1478885726.801 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:26.801Z,1478885726.801 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 235
2016-11-11T17:35:26.801Z,1478885726.801 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:35:26.803Z,1478885726.803 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:26.804Z,1478885726.804 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 235
2016-11-11T17:35:26.804Z,1478885726.804 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:35:26.818Z,1478885726.818 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:35:26.818Z,1478885726.818 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 235
2016-11-11T17:35:26.818Z,1478885726.818 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:35:26.819Z,1478885726.819 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:35:26.992Z,1478885726.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:27.194Z,1478885727.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:35:27.194Z,1478885727.194 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:35:27.195Z,1478885727.195 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:35:27.213Z,1478885727.213 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:35:27.213Z,1478885727.213 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 235
2016-11-11T17:35:27.214Z,1478885727.214 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:35:27.214Z,1478885727.214 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 235
2016-11-11T17:35:27.610Z,1478885727.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:27.615Z,1478885727.615 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:35:27.615Z,1478885727.615 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:35:27.616Z,1478885727.616 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:35:27.616Z,1478885727.616 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:35:27.617Z,1478885727.617 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:35:27.617Z,1478885727.617 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:35:27.740Z,1478885727.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:28.021Z,1478885728.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:28.391Z,1478885728.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:28.536Z,1478885728.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:28.787Z,1478885728.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:29.184Z,1478885729.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:29.333Z,1478885729.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:29.581Z,1478885729.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:29.744Z,1478885729.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:30.013Z,1478885730.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:30.429Z,1478885730.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:30.540Z,1478885730.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:30.793Z,1478885730.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:31.224Z,1478885731.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:31.336Z,1478885731.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:31.597Z,1478885731.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:31.744Z,1478885731.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:32.034Z,1478885732.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:32.433Z,1478885732.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:32.540Z,1478885732.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:32.799Z,1478885732.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:33.206Z,1478885733.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:33.336Z,1478885733.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:33.621Z,1478885733.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:33.744Z,1478885733.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:34.003Z,1478885734.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:34.387Z,1478885734.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:34.540Z,1478885734.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:34.793Z,1478885734.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:35.184Z,1478885735.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:35.336Z,1478885735.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:35.597Z,1478885735.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:35.820Z,1478885735.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:35.993Z,1478885735.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:36.393Z,1478885736.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:36.618Z,1478885736.618 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:36.798Z,1478885736.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:37.189Z,1478885737.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:37.412Z,1478885737.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:37.598Z,1478885737.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:38.005Z,1478885738.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:38.172Z,1478885738.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:38.409Z,1478885738.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:38.805Z,1478885738.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:38.968Z,1478885738.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:39.201Z,1478885739.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:39.601Z,1478885739.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:39.765Z,1478885739.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:39.997Z,1478885739.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:40.176Z,1478885740.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:40.381Z,1478885740.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:40.785Z,1478885740.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:40.972Z,1478885740.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:41.185Z,1478885741.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:41.592Z,1478885741.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:41.714Z,1478885741.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:41.989Z,1478885741.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:42.397Z,1478885742.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:42.508Z,1478885742.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:42.792Z,1478885742.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:43.202Z,1478885743.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:43.304Z,1478885743.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:43.601Z,1478885743.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:43.720Z,1478885743.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:43.996Z,1478885743.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:44.394Z,1478885744.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:44.516Z,1478885744.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:44.844Z,1478885744.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:45.178Z,1478885745.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:45.312Z,1478885745.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:45.625Z,1478885745.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:45.720Z,1478885745.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:45.983Z,1478885745.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:46.411Z,1478885746.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:46.516Z,1478885746.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:46.821Z,1478885746.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:47.205Z,1478885747.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:47.312Z,1478885747.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:47.586Z,1478885747.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:47.732Z,1478885747.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:47.989Z,1478885747.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:48.392Z,1478885748.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:48.528Z,1478885748.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:48.785Z,1478885748.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:49.181Z,1478885749.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:49.325Z,1478885749.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:49.585Z,1478885749.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:49.792Z,1478885749.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:49.986Z,1478885749.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:50.386Z,1478885750.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:50.588Z,1478885750.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:50.793Z,1478885750.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:51.189Z,1478885751.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:51.384Z,1478885751.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:51.594Z,1478885751.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:51.997Z,1478885751.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:52.152Z,1478885752.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:52.392Z,1478885752.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:52.795Z,1478885752.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:52.948Z,1478885752.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:53.205Z,1478885753.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:53.596Z,1478885753.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:53.744Z,1478885753.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:54.017Z,1478885754.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:54.160Z,1478885754.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:54.409Z,1478885754.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:54.801Z,1478885754.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:54.956Z,1478885754.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:55.207Z,1478885755.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:55.589Z,1478885755.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:55.716Z,1478885755.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:55.995Z,1478885755.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:56.383Z,1478885756.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:56.514Z,1478885756.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:56.793Z,1478885756.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:57.192Z,1478885757.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:57.308Z,1478885757.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:57.600Z,1478885757.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:57.716Z,1478885757.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:58.010Z,1478885758.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:58.408Z,1478885758.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:58.512Z,1478885758.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:58.832Z,1478885758.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:35:59.308Z,1478885759.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:35:59.720Z,1478885759.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:00.516Z,1478885760.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:01.312Z,1478885761.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:01.720Z,1478885761.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:02.226Z,1478885762.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:02.367Z,1478885762.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:02.516Z,1478885762.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:02.749Z,1478885762.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:03.174Z,1478885763.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:03.313Z,1478885763.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:03.539Z,1478885763.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:03.776Z,1478885763.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:03.985Z,1478885763.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:04.380Z,1478885764.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:04.572Z,1478885764.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:04.753Z,1478885764.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:05.140Z,1478885765.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:05.368Z,1478885765.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:05.553Z,1478885765.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:05.945Z,1478885765.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:06.132Z,1478885766.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:06.343Z,1478885766.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:06.766Z,1478885766.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:06.928Z,1478885766.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:07.150Z,1478885767.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:07.545Z,1478885767.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:07.566Z,1478885767.566 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T17:36:07.724Z,1478885767.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:07.953Z,1478885767.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:08.136Z,1478885768.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:08.349Z,1478885768.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:08.750Z,1478885768.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:08.934Z,1478885768.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:09.153Z,1478885769.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:09.552Z,1478885769.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:09.676Z,1478885769.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:09.953Z,1478885769.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:10.361Z,1478885770.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:10.472Z,1478885770.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:10.753Z,1478885770.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:11.158Z,1478885771.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:11.268Z,1478885771.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:11.566Z,1478885771.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:11.680Z,1478885771.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:11.945Z,1478885771.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:12.338Z,1478885772.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:12.476Z,1478885772.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:12.748Z,1478885772.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:13.141Z,1478885773.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:13.272Z,1478885773.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:13.550Z,1478885773.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:13.680Z,1478885773.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:13.952Z,1478885773.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:14.342Z,1478885774.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:14.476Z,1478885774.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:14.753Z,1478885774.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:15.153Z,1478885775.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:15.272Z,1478885775.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:15.565Z,1478885775.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:15.680Z,1478885775.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:15.956Z,1478885775.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:16.377Z,1478885776.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:16.476Z,1478885776.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:16.765Z,1478885776.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:17.151Z,1478885777.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:17.272Z,1478885777.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:17.561Z,1478885777.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:17.752Z,1478885777.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:17.979Z,1478885777.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:18.349Z,1478885778.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:18.548Z,1478885778.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:18.795Z,1478885778.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:19.192Z,1478885779.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:19.344Z,1478885779.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:19.546Z,1478885779.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:19.954Z,1478885779.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:20.108Z,1478885780.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:20.349Z,1478885780.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:20.753Z,1478885780.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:20.904Z,1478885780.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:21.154Z,1478885781.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:21.541Z,1478885781.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:21.701Z,1478885781.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:21.952Z,1478885781.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:22.112Z,1478885782.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:22.354Z,1478885782.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:22.757Z,1478885782.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:22.908Z,1478885782.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:23.160Z,1478885783.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:23.545Z,1478885783.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:23.672Z,1478885783.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:23.950Z,1478885783.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:24.339Z,1478885784.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:24.468Z,1478885784.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:24.740Z,1478885784.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:25.143Z,1478885785.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:25.264Z,1478885785.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:25.559Z,1478885785.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:25.672Z,1478885785.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:25.956Z,1478885785.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:26.357Z,1478885786.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:26.468Z,1478885786.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:26.751Z,1478885786.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:27.218Z,1478885787.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:27.264Z,1478885787.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:27.545Z,1478885787.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:27.672Z,1478885787.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:27.945Z,1478885787.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:28.350Z,1478885788.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:28.469Z,1478885788.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:28.751Z,1478885788.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:29.144Z,1478885789.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:29.264Z,1478885789.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:29.553Z,1478885789.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:29.672Z,1478885789.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:29.954Z,1478885789.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:30.364Z,1478885790.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:30.468Z,1478885790.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:30.760Z,1478885790.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:31.182Z,1478885791.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:31.265Z,1478885791.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:31.553Z,1478885791.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:31.732Z,1478885791.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:31.937Z,1478885791.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:32.369Z,1478885792.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:32.528Z,1478885792.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:32.737Z,1478885792.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:33.179Z,1478885793.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:33.324Z,1478885793.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:33.577Z,1478885793.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:33.949Z,1478885793.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:34.088Z,1478885794.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:34.345Z,1478885794.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:34.744Z,1478885794.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:34.884Z,1478885794.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:35.143Z,1478885795.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:35.552Z,1478885795.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:35.681Z,1478885795.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:35.948Z,1478885795.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:36.088Z,1478885796.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:36.345Z,1478885796.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:36.764Z,1478885796.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:36.886Z,1478885796.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:37.209Z,1478885797.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:37.539Z,1478885797.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:37.648Z,1478885797.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:37.946Z,1478885797.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:38.354Z,1478885798.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:38.444Z,1478885798.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:38.753Z,1478885798.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:39.216Z,1478885799.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:39.240Z,1478885799.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:39.556Z,1478885799.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:39.648Z,1478885799.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:39.961Z,1478885799.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:40.364Z,1478885800.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:40.444Z,1478885800.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:40.736Z,1478885800.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:41.195Z,1478885801.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:41.240Z,1478885801.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:41.567Z,1478885801.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:41.648Z,1478885801.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:41.944Z,1478885801.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:42.345Z,1478885802.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:42.444Z,1478885802.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:42.747Z,1478885802.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:43.197Z,1478885803.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:43.240Z,1478885803.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:43.585Z,1478885803.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:43.648Z,1478885803.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:43.952Z,1478885803.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:44.354Z,1478885804.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:44.444Z,1478885804.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:44.753Z,1478885804.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:45.145Z,1478885805.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:45.241Z,1478885805.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:45.566Z,1478885805.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:45.700Z,1478885805.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:45.989Z,1478885805.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:46.352Z,1478885806.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:46.496Z,1478885806.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:46.761Z,1478885806.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:47.173Z,1478885807.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:47.292Z,1478885807.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:47.558Z,1478885807.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:47.994Z,1478885807.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:48.076Z,1478885808.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:48.366Z,1478885808.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:48.799Z,1478885808.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:48.872Z,1478885808.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:49.153Z,1478885809.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:49.552Z,1478885809.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:49.668Z,1478885809.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:49.970Z,1478885809.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:50.076Z,1478885810.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:50.345Z,1478885810.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:50.742Z,1478885810.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:50.872Z,1478885810.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:51.186Z,1478885811.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:51.558Z,1478885811.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:51.628Z,1478885811.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:51.945Z,1478885811.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:52.351Z,1478885812.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:52.424Z,1478885812.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:52.765Z,1478885812.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:53.214Z,1478885813.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:53.220Z,1478885813.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:53.565Z,1478885813.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:53.628Z,1478885813.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:53.966Z,1478885813.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:54.334Z,1478885814.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:54.424Z,1478885814.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:54.756Z,1478885814.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:55.183Z,1478885815.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:55.220Z,1478885815.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:55.547Z,1478885815.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:55.628Z,1478885815.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:55.955Z,1478885815.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:56.357Z,1478885816.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:56.424Z,1478885816.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:56.756Z,1478885816.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:57.204Z,1478885817.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:57.220Z,1478885817.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:57.534Z,1478885817.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:57.628Z,1478885817.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:57.965Z,1478885817.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:57.974Z,1478885817.974 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T17:31:57.9Z
2016-11-11T17:36:57.974Z,1478885817.974 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T17:36:57.974Z,1478885817.974 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T17:36:58.359Z,1478885818.359 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2016-11-11T17:36:58.385Z,1478885818.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:58.424Z,1478885818.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:59.221Z,1478885819.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:36:59.279Z,1478885819.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:59.433Z,1478885819.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:36:59.704Z,1478885819.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:00.500Z,1478885820.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:01.300Z,1478885821.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:02.036Z,1478885822.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:02.832Z,1478885822.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:03.628Z,1478885823.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:04.052Z,1478885824.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:04.848Z,1478885824.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:05.592Z,1478885825.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:06.054Z,1478885826.054 [BPC1](ERROR): Failed to receive battery data
2016-11-11T17:37:06.054Z,1478885826.054 [BPC1] Communications Fault, FailCount= 1
2016-11-11T17:37:06.054Z,1478885826.054 [BPC1](ERROR): Communications Fault
2016-11-11T17:37:06.090Z,1478885826.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:06.145Z,1478885826.145 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T17:37:06.168Z,1478885826.168 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0296.lzma
2016-11-11T17:37:06.286Z,1478885826.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:06.388Z,1478885826.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:06.675Z,1478885826.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:06.970Z,1478885826.970 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0296.lzma.bak
2016-11-11T17:37:06.970Z,1478885826.970 [DataOverHttps](INFO): SBD MOMSN=4555617
2016-11-11T17:37:07.062Z,1478885827.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:07.184Z,1478885827.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:07.196Z,1478885827.196 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:37:07.196Z,1478885827.196 [BPC1] No Fault, FailCount= 1
2016-11-11T17:37:07.612Z,1478885827.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:08.408Z,1478885828.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:09.204Z,1478885829.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:09.578Z,1478885829.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:09.612Z,1478885829.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:09.740Z,1478885829.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:10.408Z,1478885830.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:11.204Z,1478885831.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:11.612Z,1478885831.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:12.408Z,1478885832.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:13.205Z,1478885833.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:13.668Z,1478885833.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:13.889Z,1478885833.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:14.029Z,1478885834.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:14.449Z,1478885834.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:14.464Z,1478885834.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:14.821Z,1478885834.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:15.232Z,1478885835.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:15.260Z,1478885835.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:15.673Z,1478885835.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:16.044Z,1478885836.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:16.840Z,1478885836.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:17.636Z,1478885837.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:18.045Z,1478885838.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:18.840Z,1478885838.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:19.564Z,1478885839.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:20.360Z,1478885840.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:21.156Z,1478885841.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:21.568Z,1478885841.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:22.364Z,1478885842.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:22.677Z,1478885842.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:22.811Z,1478885842.811 [DataOverHttps](INFO): Sending 164 bytes from file Logs/20161111T044527/Express0297.lzma
2016-11-11T17:37:22.881Z,1478885842.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:23.160Z,1478885843.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:23.287Z,1478885843.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:23.568Z,1478885843.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:23.601Z,1478885843.602 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0297.lzma.bak
2016-11-11T17:37:23.602Z,1478885843.602 [DataOverHttps](INFO): SBD MOMSN=4555619
2016-11-11T17:37:23.686Z,1478885843.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:24.364Z,1478885844.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:25.160Z,1478885845.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:25.568Z,1478885845.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:26.002Z,1478885846.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:26.036Z,1478885846.036 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T17:37:26.036Z,1478885846.036 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T17:37:26.036Z,1478885846.036 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T17:37:26.178Z,1478885846.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:26.364Z,1478885846.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:27.161Z,1478885847.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:27.657Z,1478885847.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:28.452Z,1478885848.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:29.248Z,1478885849.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:30.044Z,1478885850.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:30.452Z,1478885850.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:31.248Z,1478885851.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:32.000Z,1478885852.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:32.796Z,1478885852.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:33.330Z,1478885853.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:33.482Z,1478885853.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:33.544Z,1478885853.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:33.861Z,1478885853.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:34.254Z,1478885854.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:34.340Z,1478885854.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:34.626Z,1478885854.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:35.042Z,1478885855.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:35.136Z,1478885855.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:35.412Z,1478885855.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:35.817Z,1478885855.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:35.932Z,1478885855.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:36.217Z,1478885856.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:36.610Z,1478885856.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:36.728Z,1478885856.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:36.981Z,1478885856.981 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T17:37:37.017Z,1478885857.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:37.481Z,1478885857.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:37.524Z,1478885857.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:37.809Z,1478885857.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:38.212Z,1478885858.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:38.320Z,1478885858.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:38.613Z,1478885858.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:39.012Z,1478885859.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:39.116Z,1478885859.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:39.433Z,1478885859.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:39.811Z,1478885859.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:39.912Z,1478885859.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:40.212Z,1478885860.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:40.612Z,1478885860.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:40.708Z,1478885860.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:41.023Z,1478885861.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:41.417Z,1478885861.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:41.504Z,1478885861.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:41.812Z,1478885861.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:42.213Z,1478885862.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:42.300Z,1478885862.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:42.580Z,1478885862.580 [NAL9602](INFO): Powering down
2016-11-11T17:37:42.614Z,1478885862.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:43.008Z,1478885863.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:43.096Z,1478885863.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:43.417Z,1478885863.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:43.808Z,1478885863.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:43.892Z,1478885863.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:44.217Z,1478885864.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:44.613Z,1478885864.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:44.688Z,1478885864.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:45.017Z,1478885865.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:45.415Z,1478885865.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:45.484Z,1478885865.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:45.817Z,1478885865.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:46.259Z,1478885866.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:46.280Z,1478885866.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:46.612Z,1478885866.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:47.022Z,1478885867.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:47.076Z,1478885867.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:47.438Z,1478885867.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:47.812Z,1478885867.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:47.872Z,1478885867.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:48.262Z,1478885868.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:48.645Z,1478885868.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:48.668Z,1478885868.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:49.017Z,1478885869.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:49.417Z,1478885869.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:49.464Z,1478885869.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:49.812Z,1478885869.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:50.216Z,1478885870.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:50.260Z,1478885870.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:50.629Z,1478885870.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:51.019Z,1478885871.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:51.056Z,1478885871.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:51.414Z,1478885871.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:51.816Z,1478885871.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:51.852Z,1478885871.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:52.212Z,1478885872.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:52.612Z,1478885872.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:52.650Z,1478885872.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:53.022Z,1478885873.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:53.415Z,1478885873.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:53.444Z,1478885873.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:53.805Z,1478885873.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:54.213Z,1478885874.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:54.240Z,1478885874.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:54.616Z,1478885874.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:55.009Z,1478885875.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:55.036Z,1478885875.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:55.417Z,1478885875.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:55.814Z,1478885875.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:55.832Z,1478885875.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:56.217Z,1478885876.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:56.616Z,1478885876.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:56.628Z,1478885876.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:57.029Z,1478885877.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:57.416Z,1478885877.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:57.424Z,1478885877.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:57.867Z,1478885877.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:58.220Z,1478885878.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:58.244Z,1478885878.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:58.628Z,1478885878.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:58.636Z,1478885878.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:59.036Z,1478885879.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:59.074Z,1478885879.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:59.444Z,1478885879.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:37:59.515Z,1478885879.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:59.826Z,1478885879.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:37:59.892Z,1478885879.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:00.232Z,1478885880.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:00.300Z,1478885880.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:00.637Z,1478885880.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:00.708Z,1478885880.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:01.116Z,1478885881.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:01.137Z,1478885881.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:01.438Z,1478885881.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:01.524Z,1478885881.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:01.823Z,1478885881.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:01.932Z,1478885881.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:02.262Z,1478885882.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:02.340Z,1478885882.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:02.638Z,1478885882.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:02.748Z,1478885882.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:03.077Z,1478885883.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:03.156Z,1478885883.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:03.453Z,1478885883.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:03.564Z,1478885883.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:03.829Z,1478885883.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:03.972Z,1478885883.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:04.215Z,1478885884.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:04.380Z,1478885884.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:04.617Z,1478885884.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:05.068Z,1478885885.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:05.176Z,1478885885.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:05.428Z,1478885885.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:05.584Z,1478885885.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:05.819Z,1478885885.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:06.229Z,1478885886.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:06.380Z,1478885886.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:06.621Z,1478885886.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:07.072Z,1478885887.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:07.176Z,1478885887.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:07.424Z,1478885887.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:07.584Z,1478885887.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:07.817Z,1478885887.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:08.237Z,1478885888.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:08.380Z,1478885888.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:08.611Z,1478885888.611 [PNI_TCM](ERROR): CRC does not match. Expected:0x29218 got:0x29723
2016-11-11T17:38:08.630Z,1478885888.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:09.028Z,1478885889.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:09.176Z,1478885889.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:09.424Z,1478885889.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:09.596Z,1478885889.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:09.821Z,1478885889.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:10.235Z,1478885890.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:10.392Z,1478885890.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:10.610Z,1478885890.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:11.012Z,1478885891.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:11.188Z,1478885891.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:11.479Z,1478885891.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:11.807Z,1478885891.807 [PNI_TCM](ERROR): CRC does not match. Expected:0x49768 got:0x48771
2016-11-11T17:38:11.845Z,1478885891.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:11.932Z,1478885891.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:12.232Z,1478885892.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:12.618Z,1478885892.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:12.728Z,1478885892.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:13.017Z,1478885893.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:13.423Z,1478885893.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:13.524Z,1478885893.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:13.853Z,1478885893.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:13.932Z,1478885893.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:14.212Z,1478885894.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:14.614Z,1478885894.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:14.728Z,1478885894.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:15.048Z,1478885895.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:15.445Z,1478885895.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:15.516Z,1478885895.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:15.825Z,1478885895.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:16.221Z,1478885896.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:16.312Z,1478885896.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:16.641Z,1478885896.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:17.068Z,1478885897.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:17.108Z,1478885897.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:17.441Z,1478885897.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:17.516Z,1478885897.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:17.845Z,1478885897.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:18.227Z,1478885898.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:18.312Z,1478885898.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:18.628Z,1478885898.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:19.045Z,1478885899.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:19.108Z,1478885899.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:19.442Z,1478885899.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:19.516Z,1478885899.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:19.811Z,1478885899.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:20.212Z,1478885900.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:20.312Z,1478885900.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:20.619Z,1478885900.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:21.069Z,1478885901.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:21.108Z,1478885901.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:21.417Z,1478885901.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:21.516Z,1478885901.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:21.821Z,1478885901.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:22.220Z,1478885902.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:22.312Z,1478885902.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:22.617Z,1478885902.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:23.021Z,1478885903.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:23.108Z,1478885903.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:23.429Z,1478885903.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:23.544Z,1478885903.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:23.828Z,1478885903.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:24.229Z,1478885904.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:24.340Z,1478885904.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:24.629Z,1478885904.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:25.020Z,1478885905.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:25.136Z,1478885905.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:25.459Z,1478885905.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:25.822Z,1478885905.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:25.916Z,1478885905.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:26.218Z,1478885906.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:26.621Z,1478885906.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:26.712Z,1478885906.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:27.508Z,1478885907.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:27.916Z,1478885907.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:28.712Z,1478885908.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:29.508Z,1478885909.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:29.936Z,1478885909.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:30.155Z,1478885910.155 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:30.155Z,1478885910.155 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 236
2016-11-11T17:38:30.155Z,1478885910.155 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:38:30.179Z,1478885910.179 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:30.179Z,1478885910.179 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 236
2016-11-11T17:38:30.179Z,1478885910.179 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:38:30.181Z,1478885910.181 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:30.181Z,1478885910.181 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 236
2016-11-11T17:38:30.181Z,1478885910.181 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:38:30.206Z,1478885910.207 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:38:30.207Z,1478885910.207 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:38:30.207Z,1478885910.207 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:38:30.323Z,1478885910.323 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:38:30.327Z,1478885910.327 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 236
2016-11-11T17:38:30.328Z,1478885910.328 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:38:30.328Z,1478885910.328 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 236
2016-11-11T17:38:30.329Z,1478885910.329 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:38:30.329Z,1478885910.329 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 236
2016-11-11T17:38:30.668Z,1478885910.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:38:30.668Z,1478885910.668 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:38:30.669Z,1478885910.669 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:38:30.674Z,1478885910.674 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:38:30.674Z,1478885910.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:38:30.674Z,1478885910.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:38:30.675Z,1478885910.675 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:38:30.675Z,1478885910.675 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:38:30.676Z,1478885910.676 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:38:30.732Z,1478885910.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:31.091Z,1478885911.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:31.424Z,1478885911.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:31.465Z,1478885911.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:31.905Z,1478885911.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:32.220Z,1478885912.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:32.286Z,1478885912.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:32.660Z,1478885912.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:33.016Z,1478885913.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:33.085Z,1478885913.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:33.426Z,1478885913.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:33.473Z,1478885913.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:33.865Z,1478885913.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:34.220Z,1478885914.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:34.273Z,1478885914.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:34.672Z,1478885914.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:35.016Z,1478885915.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:35.081Z,1478885915.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:35.424Z,1478885915.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:35.473Z,1478885915.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:35.857Z,1478885915.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:36.220Z,1478885916.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:36.262Z,1478885916.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:36.658Z,1478885916.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:37.016Z,1478885917.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:37.117Z,1478885917.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:37.468Z,1478885917.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:37.544Z,1478885917.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:37.869Z,1478885917.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:38.272Z,1478885918.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:38.340Z,1478885918.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:38.668Z,1478885918.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:39.072Z,1478885919.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:39.136Z,1478885919.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:39.520Z,1478885919.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:39.853Z,1478885919.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:39.936Z,1478885919.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:40.257Z,1478885920.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:40.657Z,1478885920.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:40.732Z,1478885920.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:41.058Z,1478885921.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:41.484Z,1478885921.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:41.528Z,1478885921.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:41.859Z,1478885921.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:41.936Z,1478885921.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:42.263Z,1478885922.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:42.660Z,1478885922.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:42.732Z,1478885922.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:43.059Z,1478885923.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:43.392Z,1478885923.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:43.493Z,1478885923.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:43.870Z,1478885923.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:44.188Z,1478885924.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:44.282Z,1478885924.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:44.662Z,1478885924.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:44.985Z,1478885924.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:45.061Z,1478885925.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:45.392Z,1478885925.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:45.490Z,1478885925.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:45.868Z,1478885925.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:46.188Z,1478885926.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:46.278Z,1478885926.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:46.689Z,1478885926.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:46.984Z,1478885926.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:47.073Z,1478885927.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:47.392Z,1478885927.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:47.471Z,1478885927.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:47.872Z,1478885927.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:48.188Z,1478885928.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:48.271Z,1478885928.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:48.671Z,1478885928.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:48.984Z,1478885928.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:49.083Z,1478885929.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:49.392Z,1478885929.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:49.452Z,1478885929.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:49.857Z,1478885929.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:50.188Z,1478885930.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:50.285Z,1478885930.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:50.655Z,1478885930.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:50.984Z,1478885930.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:51.139Z,1478885931.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:51.472Z,1478885931.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:51.556Z,1478885931.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:51.864Z,1478885931.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:52.279Z,1478885932.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:52.352Z,1478885932.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:52.677Z,1478885932.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:53.077Z,1478885933.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:53.148Z,1478885933.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:53.496Z,1478885933.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:53.861Z,1478885933.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:53.880Z,1478885933.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:54.260Z,1478885934.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:54.667Z,1478885934.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:54.676Z,1478885934.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:55.063Z,1478885935.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:55.472Z,1478885935.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:55.498Z,1478885935.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:55.859Z,1478885935.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:55.880Z,1478885935.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:56.268Z,1478885936.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:56.662Z,1478885936.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:56.676Z,1478885936.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:57.060Z,1478885937.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:57.376Z,1478885937.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:57.509Z,1478885937.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:57.872Z,1478885937.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:58.172Z,1478885938.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:58.271Z,1478885938.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:58.698Z,1478885938.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:58.968Z,1478885938.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:59.071Z,1478885939.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:59.376Z,1478885939.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:38:59.468Z,1478885939.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:38:59.882Z,1478885939.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:00.172Z,1478885940.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:00.263Z,1478885940.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:00.686Z,1478885940.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:00.968Z,1478885940.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:01.116Z,1478885941.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:01.376Z,1478885941.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:01.477Z,1478885941.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:01.851Z,1478885941.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:02.172Z,1478885942.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:02.256Z,1478885942.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:02.655Z,1478885942.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:02.968Z,1478885942.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:03.070Z,1478885943.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:03.380Z,1478885943.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:03.468Z,1478885943.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:03.859Z,1478885943.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:04.176Z,1478885944.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:04.270Z,1478885944.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:04.664Z,1478885944.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:04.972Z,1478885944.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:05.080Z,1478885945.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:05.471Z,1478885945.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:05.528Z,1478885945.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:05.869Z,1478885945.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:06.268Z,1478885946.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:06.324Z,1478885946.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:06.671Z,1478885946.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:07.068Z,1478885947.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:07.120Z,1478885947.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:07.489Z,1478885947.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:07.832Z,1478885947.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:07.881Z,1478885947.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:08.253Z,1478885948.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:08.628Z,1478885948.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:08.673Z,1478885948.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:09.060Z,1478885949.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:09.427Z,1478885949.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:09.493Z,1478885949.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:09.860Z,1478885949.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:09.872Z,1478885949.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:10.261Z,1478885950.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:10.668Z,1478885950.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:10.682Z,1478885950.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:11.065Z,1478885951.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:11.348Z,1478885951.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:11.473Z,1478885951.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:11.897Z,1478885951.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:12.144Z,1478885952.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:12.268Z,1478885952.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:12.672Z,1478885952.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:12.941Z,1478885952.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:13.129Z,1478885953.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:13.368Z,1478885953.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:13.456Z,1478885953.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:13.861Z,1478885953.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:14.164Z,1478885954.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:14.305Z,1478885954.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:14.656Z,1478885954.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:14.960Z,1478885954.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:15.109Z,1478885955.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:15.368Z,1478885955.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:15.492Z,1478885955.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:15.865Z,1478885955.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:16.164Z,1478885956.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:16.261Z,1478885956.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:16.670Z,1478885956.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:16.960Z,1478885956.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:17.069Z,1478885957.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:17.368Z,1478885957.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:17.470Z,1478885957.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:17.869Z,1478885957.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:18.164Z,1478885958.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:18.273Z,1478885958.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:18.672Z,1478885958.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:18.960Z,1478885958.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:19.090Z,1478885959.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:19.453Z,1478885959.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:19.504Z,1478885959.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:19.858Z,1478885959.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:20.257Z,1478885960.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:20.300Z,1478885960.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:20.657Z,1478885960.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:21.057Z,1478885961.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:21.096Z,1478885961.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:21.472Z,1478885961.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:21.800Z,1478885961.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:21.866Z,1478885961.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:22.262Z,1478885962.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:22.596Z,1478885962.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:22.661Z,1478885962.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:23.064Z,1478885963.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:23.393Z,1478885963.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:23.471Z,1478885963.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:23.804Z,1478885963.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:23.869Z,1478885963.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:24.269Z,1478885964.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:24.600Z,1478885964.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:24.679Z,1478885964.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:25.077Z,1478885965.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:25.328Z,1478885965.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:25.477Z,1478885965.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:25.861Z,1478885965.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:26.124Z,1478885966.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:26.309Z,1478885966.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:26.660Z,1478885966.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:26.921Z,1478885966.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:27.328Z,1478885967.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:28.124Z,1478885968.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:28.920Z,1478885968.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:29.348Z,1478885969.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:30.061Z,1478885970.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:30.145Z,1478885970.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:30.175Z,1478885970.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:30.601Z,1478885970.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:30.940Z,1478885970.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:30.993Z,1478885970.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:31.348Z,1478885971.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:31.399Z,1478885971.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:31.769Z,1478885971.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:32.144Z,1478885972.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:32.202Z,1478885972.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:32.573Z,1478885972.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:32.944Z,1478885972.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:33.024Z,1478885973.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:33.361Z,1478885973.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:33.456Z,1478885973.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:33.756Z,1478885973.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:34.161Z,1478885974.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:34.252Z,1478885974.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:34.561Z,1478885974.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:34.965Z,1478885974.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:35.048Z,1478885975.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:35.446Z,1478885975.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:35.765Z,1478885975.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:35.816Z,1478885975.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:36.164Z,1478885976.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:36.569Z,1478885976.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:36.612Z,1478885976.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:36.977Z,1478885976.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:37.408Z,1478885977.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:37.410Z,1478885977.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:37.770Z,1478885977.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:37.836Z,1478885977.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:38.174Z,1478885978.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:38.573Z,1478885978.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:38.632Z,1478885978.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:38.969Z,1478885978.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:39.308Z,1478885979.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:39.376Z,1478885979.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:39.769Z,1478885979.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:40.104Z,1478885980.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:40.177Z,1478885980.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:40.577Z,1478885980.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:40.902Z,1478885980.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:40.978Z,1478885980.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:41.328Z,1478885981.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:41.382Z,1478885981.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:41.781Z,1478885981.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:42.124Z,1478885982.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:42.178Z,1478885982.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:42.577Z,1478885982.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:42.920Z,1478885982.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:43.013Z,1478885983.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:43.330Z,1478885983.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:43.357Z,1478885983.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:43.797Z,1478885983.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:44.124Z,1478885984.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:44.172Z,1478885984.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:44.572Z,1478885984.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:44.920Z,1478885984.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:45.014Z,1478885985.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:45.334Z,1478885985.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:45.377Z,1478885985.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:45.806Z,1478885985.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:46.129Z,1478885986.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:46.206Z,1478885986.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:46.566Z,1478885986.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:46.924Z,1478885986.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:47.043Z,1478885987.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:47.380Z,1478885987.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:47.436Z,1478885987.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:47.785Z,1478885987.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:48.157Z,1478885988.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:48.232Z,1478885988.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:48.560Z,1478885988.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:48.966Z,1478885988.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:49.028Z,1478885989.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:49.402Z,1478885989.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:49.763Z,1478885989.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:49.800Z,1478885989.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:50.162Z,1478885990.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:50.562Z,1478885990.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:50.596Z,1478885990.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:50.971Z,1478885990.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:51.372Z,1478885991.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:51.392Z,1478885991.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:51.764Z,1478885991.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:51.820Z,1478885991.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:52.172Z,1478885992.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:52.569Z,1478885992.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:52.616Z,1478885992.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:52.989Z,1478885992.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:53.304Z,1478885993.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:53.373Z,1478885993.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:53.773Z,1478885993.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:54.100Z,1478885994.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:54.176Z,1478885994.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:54.575Z,1478885994.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:54.896Z,1478885994.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:54.976Z,1478885994.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:55.304Z,1478885995.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:55.377Z,1478885995.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:55.781Z,1478885995.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:56.100Z,1478885996.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:56.165Z,1478885996.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:56.568Z,1478885996.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:56.896Z,1478885996.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:56.994Z,1478885996.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:57.304Z,1478885997.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:57.413Z,1478885997.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:57.762Z,1478885997.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:58.100Z,1478885998.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:58.223Z,1478885998.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:58.569Z,1478885998.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:58.896Z,1478885998.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:59.009Z,1478885999.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:59.304Z,1478885999.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:39:59.377Z,1478885999.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:39:59.786Z,1478885999.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:00.100Z,1478886000.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:00.166Z,1478886000.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:00.607Z,1478886000.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:00.896Z,1478886000.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:01.002Z,1478886001.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:01.367Z,1478886001.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:01.436Z,1478886001.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:01.772Z,1478886001.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:02.165Z,1478886002.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:02.232Z,1478886002.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:02.573Z,1478886002.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:02.975Z,1478886002.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:03.028Z,1478886003.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:03.394Z,1478886003.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:03.772Z,1478886003.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:03.796Z,1478886003.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:04.177Z,1478886004.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:04.588Z,1478886004.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:04.592Z,1478886004.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:04.956Z,1478886004.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:05.365Z,1478886005.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:05.388Z,1478886005.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:05.763Z,1478886005.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:05.800Z,1478886005.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:06.205Z,1478886006.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:06.566Z,1478886006.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:06.596Z,1478886006.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:06.963Z,1478886006.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:07.264Z,1478886007.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:07.367Z,1478886007.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:07.773Z,1478886007.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:08.060Z,1478886008.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:08.163Z,1478886008.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:08.563Z,1478886008.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:08.857Z,1478886008.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:08.972Z,1478886008.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:09.272Z,1478886009.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:09.377Z,1478886009.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:09.764Z,1478886009.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:10.068Z,1478886010.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:10.172Z,1478886010.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:10.575Z,1478886010.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:10.864Z,1478886010.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:10.973Z,1478886010.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:11.272Z,1478886011.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:11.374Z,1478886011.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:11.773Z,1478886011.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:12.068Z,1478886012.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:12.190Z,1478886012.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:12.570Z,1478886012.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:12.864Z,1478886012.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:13.016Z,1478886013.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:13.288Z,1478886013.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:13.366Z,1478886013.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:13.797Z,1478886013.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:14.084Z,1478886014.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:14.184Z,1478886014.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:14.597Z,1478886014.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:14.880Z,1478886014.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:15.002Z,1478886015.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:15.385Z,1478886015.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:15.400Z,1478886015.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:15.759Z,1478886015.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:16.161Z,1478886016.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:16.196Z,1478886016.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:16.565Z,1478886016.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:16.960Z,1478886016.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:16.992Z,1478886016.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:17.392Z,1478886017.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:17.724Z,1478886017.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:17.768Z,1478886017.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:18.164Z,1478886018.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:18.520Z,1478886018.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:18.576Z,1478886018.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:18.969Z,1478886018.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:19.329Z,1478886019.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:19.373Z,1478886019.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:19.771Z,1478886019.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:19.772Z,1478886019.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:20.174Z,1478886020.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:20.568Z,1478886020.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:20.573Z,1478886020.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:20.970Z,1478886020.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:21.244Z,1478886021.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:21.373Z,1478886021.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:21.770Z,1478886021.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:22.040Z,1478886022.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:22.172Z,1478886022.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:22.575Z,1478886022.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:22.836Z,1478886022.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:22.966Z,1478886022.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:23.244Z,1478886023.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:23.369Z,1478886023.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:23.784Z,1478886023.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:24.040Z,1478886024.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:24.158Z,1478886024.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:24.562Z,1478886024.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:24.836Z,1478886024.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:24.962Z,1478886024.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:25.244Z,1478886025.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:25.359Z,1478886025.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:25.770Z,1478886025.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:26.040Z,1478886026.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:26.168Z,1478886026.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:26.629Z,1478886026.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:26.837Z,1478886026.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:26.971Z,1478886026.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:27.248Z,1478886027.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:28.044Z,1478886028.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:28.842Z,1478886028.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:29.356Z,1478886029.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:30.152Z,1478886030.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:30.420Z,1478886030.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:30.527Z,1478886030.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:30.956Z,1478886030.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:30.969Z,1478886030.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:31.380Z,1478886031.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:31.723Z,1478886031.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:31.736Z,1478886031.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:32.124Z,1478886032.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:32.527Z,1478886032.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:32.532Z,1478886032.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:32.925Z,1478886032.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:33.328Z,1478886033.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:33.342Z,1478886033.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:33.733Z,1478886033.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:33.740Z,1478886033.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:34.126Z,1478886034.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:34.532Z,1478886034.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:34.536Z,1478886034.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:34.930Z,1478886034.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:35.224Z,1478886035.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:35.331Z,1478886035.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:35.731Z,1478886035.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:36.020Z,1478886036.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:36.134Z,1478886036.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:36.526Z,1478886036.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:36.816Z,1478886036.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:36.938Z,1478886036.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:37.224Z,1478886037.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:37.334Z,1478886037.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:37.726Z,1478886037.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:38.020Z,1478886038.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:38.132Z,1478886038.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:38.537Z,1478886038.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:38.816Z,1478886038.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:38.938Z,1478886038.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:39.228Z,1478886039.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:39.334Z,1478886039.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:39.721Z,1478886039.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:40.024Z,1478886040.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:40.116Z,1478886040.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:40.524Z,1478886040.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:40.820Z,1478886040.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:40.928Z,1478886040.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:41.228Z,1478886041.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:41.322Z,1478886041.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:41.726Z,1478886041.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:42.024Z,1478886042.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:42.137Z,1478886042.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:42.523Z,1478886042.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:42.820Z,1478886042.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:42.963Z,1478886042.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:43.356Z,1478886043.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:43.393Z,1478886043.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:43.721Z,1478886043.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:44.124Z,1478886044.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:44.152Z,1478886044.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:44.554Z,1478886044.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:44.922Z,1478886044.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:44.948Z,1478886044.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:45.373Z,1478886045.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:45.672Z,1478886045.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:45.757Z,1478886045.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:46.123Z,1478886046.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:46.468Z,1478886046.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:46.526Z,1478886046.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:46.924Z,1478886046.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:47.265Z,1478886047.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:47.333Z,1478886047.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:47.672Z,1478886047.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:47.736Z,1478886047.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:48.129Z,1478886048.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:48.468Z,1478886048.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:48.525Z,1478886048.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:48.932Z,1478886048.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:49.212Z,1478886049.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:49.330Z,1478886049.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:49.726Z,1478886049.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:50.008Z,1478886050.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:50.131Z,1478886050.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:50.534Z,1478886050.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:50.806Z,1478886050.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:50.932Z,1478886050.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:51.216Z,1478886051.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:51.331Z,1478886051.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:51.734Z,1478886051.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:52.012Z,1478886052.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:52.124Z,1478886052.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:52.538Z,1478886052.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:52.808Z,1478886052.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:52.932Z,1478886052.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:53.216Z,1478886053.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:53.327Z,1478886053.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:53.725Z,1478886053.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:54.012Z,1478886054.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:54.134Z,1478886054.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:54.533Z,1478886054.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:54.808Z,1478886054.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:54.933Z,1478886054.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:55.216Z,1478886055.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:55.334Z,1478886055.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:55.733Z,1478886055.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:56.012Z,1478886056.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:56.132Z,1478886056.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:56.533Z,1478886056.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:56.808Z,1478886056.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:56.956Z,1478886056.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:57.340Z,1478886057.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:57.343Z,1478886057.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:57.721Z,1478886057.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:58.136Z,1478886058.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:58.197Z,1478886058.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:58.529Z,1478886058.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:58.932Z,1478886058.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:58.957Z,1478886058.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:59.329Z,1478886059.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:40:59.652Z,1478886059.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:40:59.747Z,1478886059.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:00.161Z,1478886060.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:00.448Z,1478886060.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:00.524Z,1478886060.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:00.923Z,1478886060.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:01.244Z,1478886061.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:01.330Z,1478886061.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:01.656Z,1478886061.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:01.726Z,1478886061.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:02.129Z,1478886062.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:02.454Z,1478886062.454 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:02.535Z,1478886062.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:02.929Z,1478886062.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:03.180Z,1478886063.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:03.332Z,1478886063.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:03.735Z,1478886063.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:03.976Z,1478886063.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:04.124Z,1478886064.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:04.533Z,1478886064.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:04.772Z,1478886064.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:04.934Z,1478886064.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:05.180Z,1478886065.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:05.349Z,1478886065.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:05.732Z,1478886065.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:05.976Z,1478886065.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:06.129Z,1478886066.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:06.525Z,1478886066.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:06.772Z,1478886066.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:06.939Z,1478886066.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:07.180Z,1478886067.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:07.336Z,1478886067.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:07.732Z,1478886067.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:07.976Z,1478886067.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:08.135Z,1478886068.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:08.533Z,1478886068.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:08.772Z,1478886068.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:08.933Z,1478886068.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:09.180Z,1478886069.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:09.331Z,1478886069.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:09.732Z,1478886069.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:09.976Z,1478886069.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:10.133Z,1478886070.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:10.535Z,1478886070.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:10.772Z,1478886070.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:10.937Z,1478886070.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:11.260Z,1478886071.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:11.338Z,1478886071.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:11.741Z,1478886071.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:12.056Z,1478886072.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:12.121Z,1478886072.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:12.553Z,1478886072.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:12.852Z,1478886072.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:12.937Z,1478886072.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:13.362Z,1478886073.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:13.620Z,1478886073.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:13.719Z,1478886073.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:14.157Z,1478886074.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:14.416Z,1478886074.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:14.573Z,1478886074.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:14.922Z,1478886074.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:15.213Z,1478886075.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:15.329Z,1478886075.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:15.620Z,1478886075.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:15.727Z,1478886075.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:16.123Z,1478886076.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:16.416Z,1478886076.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:16.529Z,1478886076.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:16.929Z,1478886076.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:17.148Z,1478886077.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:17.328Z,1478886077.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:17.723Z,1478886077.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:17.944Z,1478886077.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:18.129Z,1478886078.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:18.523Z,1478886078.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:18.741Z,1478886078.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:18.929Z,1478886078.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:19.168Z,1478886079.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:19.325Z,1478886079.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:19.724Z,1478886079.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:19.964Z,1478886079.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:20.129Z,1478886080.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:20.528Z,1478886080.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:20.760Z,1478886080.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:20.938Z,1478886080.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:21.168Z,1478886081.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:21.333Z,1478886081.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:21.733Z,1478886081.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:21.964Z,1478886081.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:22.126Z,1478886082.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:22.533Z,1478886082.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:22.761Z,1478886082.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:22.934Z,1478886082.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:23.168Z,1478886083.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:23.326Z,1478886083.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:23.737Z,1478886083.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:23.964Z,1478886083.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:24.133Z,1478886084.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:24.532Z,1478886084.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:24.760Z,1478886084.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:24.933Z,1478886084.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:25.244Z,1478886085.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:25.361Z,1478886085.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:25.734Z,1478886085.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:26.040Z,1478886086.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:26.140Z,1478886086.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:26.542Z,1478886086.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:26.836Z,1478886086.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:26.941Z,1478886086.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:27.338Z,1478886087.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:27.604Z,1478886087.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:28.400Z,1478886088.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:29.196Z,1478886089.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:29.612Z,1478886089.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:30.408Z,1478886090.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:30.970Z,1478886090.970 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:30.970Z,1478886090.970 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 237
2016-11-11T17:41:30.970Z,1478886090.970 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:41:30.976Z,1478886090.976 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:30.977Z,1478886090.977 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 237
2016-11-11T17:41:30.977Z,1478886090.977 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:41:30.979Z,1478886090.979 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:30.979Z,1478886090.979 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 237
2016-11-11T17:41:31.004Z,1478886091.004 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:41:31.031Z,1478886091.031 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:41:31.031Z,1478886091.031 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:41:31.031Z,1478886091.031 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:41:31.140Z,1478886091.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:31.172Z,1478886091.172 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:41:31.172Z,1478886091.172 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 237
2016-11-11T17:41:31.173Z,1478886091.173 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:41:31.173Z,1478886091.173 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 237
2016-11-11T17:41:31.174Z,1478886091.174 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:41:31.174Z,1478886091.174 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 237
2016-11-11T17:41:31.536Z,1478886091.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:41:31.536Z,1478886091.536 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:41:31.537Z,1478886091.537 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:41:31.541Z,1478886091.541 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:41:31.542Z,1478886091.542 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:41:31.542Z,1478886091.542 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:41:31.543Z,1478886091.543 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:41:31.544Z,1478886091.543 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:41:31.544Z,1478886091.544 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:41:31.894Z,1478886091.894 [PNI_TCM](ERROR): CRC does not match. Expected:0x18728 got:0x16871
2016-11-11T17:41:31.937Z,1478886091.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:31.949Z,1478886091.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:32.301Z,1478886092.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:32.732Z,1478886092.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:32.798Z,1478886092.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:33.101Z,1478886093.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:33.160Z,1478886093.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:33.514Z,1478886093.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:33.905Z,1478886093.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:33.956Z,1478886093.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:34.321Z,1478886094.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:34.720Z,1478886094.720 [PNI_TCM](ERROR): CRC does not match. Expected:0x27463 got:0x7490
2016-11-11T17:41:34.752Z,1478886094.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:34.758Z,1478886094.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:35.113Z,1478886095.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:35.172Z,1478886095.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:35.503Z,1478886095.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:35.902Z,1478886095.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:35.968Z,1478886095.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:36.311Z,1478886096.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:36.741Z,1478886096.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:36.764Z,1478886096.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:37.100Z,1478886097.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:37.172Z,1478886097.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:37.502Z,1478886097.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:37.901Z,1478886097.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:37.968Z,1478886097.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:38.301Z,1478886098.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:38.718Z,1478886098.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:38.765Z,1478886098.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:39.113Z,1478886099.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:39.252Z,1478886099.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:39.498Z,1478886099.498 [PNI_TCM](ERROR): CRC does not match. Expected:0x17054 got:0x20919
2016-11-11T17:41:39.525Z,1478886099.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:39.913Z,1478886099.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:40.048Z,1478886100.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:40.317Z,1478886100.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:40.717Z,1478886100.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:40.846Z,1478886100.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:41.085Z,1478886101.085 [PNI_TCM](ERROR): CRC does not match. Expected:0x59113 got:0x59456
2016-11-11T17:41:41.173Z,1478886101.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:41.504Z,1478886101.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:41.616Z,1478886101.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:41.904Z,1478886101.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:42.312Z,1478886102.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:42.412Z,1478886102.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:42.745Z,1478886102.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:43.145Z,1478886103.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:43.208Z,1478886103.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:43.510Z,1478886103.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:43.616Z,1478886103.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:43.914Z,1478886103.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:44.329Z,1478886104.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:44.412Z,1478886104.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:44.733Z,1478886104.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:45.097Z,1478886105.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:45.164Z,1478886105.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:45.533Z,1478886105.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:45.897Z,1478886105.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:45.960Z,1478886105.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:46.359Z,1478886106.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:46.730Z,1478886106.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:46.764Z,1478886106.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:47.137Z,1478886107.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:47.172Z,1478886107.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:47.505Z,1478886107.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:47.896Z,1478886107.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:47.968Z,1478886107.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:48.305Z,1478886108.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:48.737Z,1478886108.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:48.764Z,1478886108.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:49.105Z,1478886109.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:49.172Z,1478886109.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:49.511Z,1478886109.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:49.905Z,1478886109.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:49.968Z,1478886109.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:50.306Z,1478886110.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:50.750Z,1478886110.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:50.764Z,1478886110.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:51.111Z,1478886111.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:51.172Z,1478886111.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:51.502Z,1478886111.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:51.913Z,1478886111.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:51.968Z,1478886111.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:52.314Z,1478886112.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:52.708Z,1478886112.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:52.764Z,1478886112.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:53.097Z,1478886113.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:53.236Z,1478886113.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:53.529Z,1478886113.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:53.901Z,1478886113.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:54.032Z,1478886114.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:54.297Z,1478886114.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:54.705Z,1478886114.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:54.828Z,1478886114.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:55.162Z,1478886115.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:55.503Z,1478886115.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:55.596Z,1478886115.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:55.905Z,1478886115.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:56.299Z,1478886116.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:56.392Z,1478886116.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:56.709Z,1478886116.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:57.165Z,1478886117.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:57.188Z,1478886117.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:57.564Z,1478886117.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:57.600Z,1478886117.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:57.917Z,1478886117.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:58.303Z,1478886118.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:58.396Z,1478886118.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:58.762Z,1478886118.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:59.117Z,1478886119.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:59.180Z,1478886119.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:41:59.574Z,1478886119.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:59.914Z,1478886119.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:41:59.977Z,1478886119.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:00.333Z,1478886120.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:00.753Z,1478886120.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:00.772Z,1478886120.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:01.134Z,1478886121.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:01.196Z,1478886121.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:01.517Z,1478886121.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:01.938Z,1478886121.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:01.992Z,1478886121.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:02.317Z,1478886122.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:02.746Z,1478886122.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:02.788Z,1478886122.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:03.130Z,1478886123.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:03.196Z,1478886123.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:03.506Z,1478886123.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:03.924Z,1478886123.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:03.992Z,1478886123.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:04.336Z,1478886124.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:04.734Z,1478886124.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:04.792Z,1478886124.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:05.105Z,1478886125.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:05.200Z,1478886125.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:05.529Z,1478886125.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:05.918Z,1478886125.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:05.996Z,1478886125.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:06.333Z,1478886126.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:06.734Z,1478886126.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:06.792Z,1478886126.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:07.111Z,1478886127.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:07.248Z,1478886127.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:07.522Z,1478886127.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:07.925Z,1478886127.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:08.044Z,1478886128.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:08.318Z,1478886128.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:08.759Z,1478886128.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:08.840Z,1478886128.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:09.172Z,1478886129.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:09.498Z,1478886129.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:09.636Z,1478886129.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:09.950Z,1478886129.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:10.248Z,1478886130.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:10.350Z,1478886130.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:10.712Z,1478886130.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:11.045Z,1478886131.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:11.191Z,1478886131.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:11.500Z,1478886131.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:11.592Z,1478886131.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:11.957Z,1478886131.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:12.298Z,1478886132.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:12.388Z,1478886132.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:12.824Z,1478886132.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:13.084Z,1478886133.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:13.154Z,1478886133.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:13.552Z,1478886133.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:13.880Z,1478886133.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:13.912Z,1478886133.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:14.325Z,1478886134.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:14.678Z,1478886134.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:14.767Z,1478886134.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:15.128Z,1478886135.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:15.131Z,1478886135.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:15.530Z,1478886135.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:15.917Z,1478886135.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:15.928Z,1478886135.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:16.346Z,1478886136.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:16.724Z,1478886136.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:16.728Z,1478886136.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:17.121Z,1478886137.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:17.208Z,1478886137.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:17.526Z,1478886137.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:17.898Z,1478886137.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:18.004Z,1478886138.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:18.311Z,1478886138.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:18.730Z,1478886138.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:18.800Z,1478886138.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:19.122Z,1478886139.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:19.208Z,1478886139.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:19.527Z,1478886139.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:19.914Z,1478886139.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:20.004Z,1478886140.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:20.317Z,1478886140.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:20.773Z,1478886140.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:20.804Z,1478886140.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:21.126Z,1478886141.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:21.216Z,1478886141.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:21.535Z,1478886141.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:21.910Z,1478886141.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:22.012Z,1478886142.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:22.316Z,1478886142.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:22.711Z,1478886142.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:22.808Z,1478886142.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:23.162Z,1478886143.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:23.523Z,1478886143.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:23.576Z,1478886143.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:23.902Z,1478886143.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:24.309Z,1478886144.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:24.372Z,1478886144.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:24.706Z,1478886144.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:25.154Z,1478886145.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:25.168Z,1478886145.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:25.565Z,1478886145.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:25.604Z,1478886145.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:25.898Z,1478886145.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:26.302Z,1478886146.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:26.352Z,1478886146.352 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T17:42:26.352Z,1478886146.352 [Default:CheckIn:C.Wait] Stopped
2016-11-11T17:42:26.352Z,1478886146.352 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T17:42:26.352Z,1478886146.352 [Default:CheckIn:D] Running Loop=1
2016-11-11T17:42:26.400Z,1478886146.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:26.758Z,1478886146.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:26.767Z,1478886146.767 [Default:CheckIn:D] Stopped
2016-11-11T17:42:26.767Z,1478886146.767 [Default:CheckIn:E] Running Loop=1
2016-11-11T17:42:27.063Z,1478886147.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:27.124Z,1478886147.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:27.161Z,1478886147.161 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 772.424284 min 
2016-11-11T17:42:27.162Z,1478886147.162 [Default:CheckIn:E] Stopped
2016-11-11T17:42:27.162Z,1478886147.162 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T17:42:27.162Z,1478886147.162 [Default:CheckIn] Stopped
2016-11-11T17:42:27.162Z,1478886147.162 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T17:42:27.162Z,1478886147.162 [Default:CheckIn](INFO): Running loop #75
2016-11-11T17:42:27.162Z,1478886147.162 [Default:CheckIn] Running Loop=75
2016-11-11T17:42:27.162Z,1478886147.162 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T17:42:27.162Z,1478886147.162 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T17:42:27.525Z,1478886147.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:27.860Z,1478886147.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:28.656Z,1478886148.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:29.072Z,1478886149.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:29.868Z,1478886149.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:30.664Z,1478886150.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:31.077Z,1478886151.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:31.872Z,1478886151.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:32.618Z,1478886152.618 [NAL9602](INFO): Powering up
2016-11-11T17:42:32.668Z,1478886152.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:32.690Z,1478886152.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:32.833Z,1478886152.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:33.088Z,1478886153.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:33.226Z,1478886153.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:33.591Z,1478886153.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:33.884Z,1478886153.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:33.992Z,1478886153.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:34.393Z,1478886154.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:34.681Z,1478886154.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:34.799Z,1478886154.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:35.136Z,1478886155.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:35.197Z,1478886155.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:35.598Z,1478886155.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:35.936Z,1478886155.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:35.000Z,1478886156.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:36.397Z,1478886156.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:36.732Z,1478886156.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:36.792Z,1478886156.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:37.209Z,1478886157.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:37.488Z,1478886157.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:37.580Z,1478886157.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:37.985Z,1478886157.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:38.284Z,1478886158.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:38.384Z,1478886158.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:38.785Z,1478886158.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:39.081Z,1478886159.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:39.186Z,1478886159.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:39.492Z,1478886159.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:39.589Z,1478886159.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:39.987Z,1478886159.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:40.288Z,1478886160.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:40.385Z,1478886160.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:40.785Z,1478886160.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:41.016Z,1478886161.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:41.189Z,1478886161.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:41.584Z,1478886161.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:41.812Z,1478886161.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:41.989Z,1478886161.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:42.380Z,1478886162.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:42.609Z,1478886162.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:42.781Z,1478886162.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:43.191Z,1478886163.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:43.404Z,1478886163.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:43.553Z,1478886163.553 [NAL9602](INFO): NAL9602 initialized
2016-11-11T17:42:43.585Z,1478886163.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:44.002Z,1478886164.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:44.200Z,1478886164.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:44.353Z,1478886164.353 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T17:42:44.353Z,1478886164.353 [NAL9602] Data Fault, FailCount= 2
2016-11-11T17:42:44.353Z,1478886164.353 [NAL9602](ERROR): Data Fault
2016-11-11T17:42:44.386Z,1478886164.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:44.406Z,1478886164.406 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T17:42:44.753Z,1478886164.753 [NAL9602](INFO): Powering down
2016-11-11T17:42:44.789Z,1478886164.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:44.996Z,1478886164.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:45.202Z,1478886165.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:45.584Z,1478886165.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:45.603Z,1478886165.603 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T17:42:45.603Z,1478886165.603 [NAL9602] No Fault, FailCount= 2
2016-11-11T17:42:45.792Z,1478886165.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:46.013Z,1478886166.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:46.383Z,1478886166.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:46.588Z,1478886166.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:46.813Z,1478886166.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:47.184Z,1478886167.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:47.384Z,1478886167.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:47.609Z,1478886167.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:47.984Z,1478886167.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:48.180Z,1478886168.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:48.380Z,1478886168.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:48.789Z,1478886168.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:48.976Z,1478886168.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:49.181Z,1478886169.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:49.584Z,1478886169.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:49.772Z,1478886169.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:49.973Z,1478886169.973 [NAL9602](INFO): Powering up NAL9602
2016-11-11T17:42:50.022Z,1478886170.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:50.384Z,1478886170.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:50.568Z,1478886170.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:50.784Z,1478886170.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:51.179Z,1478886171.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:51.364Z,1478886171.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:51.585Z,1478886171.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:51.980Z,1478886171.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:52.160Z,1478886172.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:52.383Z,1478886172.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:52.785Z,1478886172.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:52.956Z,1478886172.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:53.184Z,1478886173.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:53.580Z,1478886173.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:53.752Z,1478886173.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:53.989Z,1478886173.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:54.388Z,1478886174.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:54.549Z,1478886174.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:54.789Z,1478886174.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:55.218Z,1478886175.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:55.344Z,1478886175.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:55.584Z,1478886175.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:55.989Z,1478886175.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:56.140Z,1478886176.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:56.393Z,1478886176.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:56.784Z,1478886176.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:56.936Z,1478886176.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:57.188Z,1478886177.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:57.584Z,1478886177.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:57.732Z,1478886177.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:57.996Z,1478886177.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:58.389Z,1478886178.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:58.528Z,1478886178.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:58.809Z,1478886178.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:59.189Z,1478886179.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:59.324Z,1478886179.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:42:59.602Z,1478886179.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:42:59.989Z,1478886179.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:00.120Z,1478886180.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:00.417Z,1478886180.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:00.794Z,1478886180.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:00.916Z,1478886180.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:01.153Z,1478886181.153 [NAL9602](INFO): NAL9602 initialized
2016-11-11T17:43:01.217Z,1478886181.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:01.617Z,1478886181.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:01.712Z,1478886181.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:01.994Z,1478886181.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:02.399Z,1478886182.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:02.508Z,1478886182.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:02.795Z,1478886182.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:03.196Z,1478886183.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:03.304Z,1478886183.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:03.585Z,1478886183.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:03.985Z,1478886183.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:04.100Z,1478886184.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:04.409Z,1478886184.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:04.596Z,1478886184.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:04.813Z,1478886184.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:05.005Z,1478886185.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:05.204Z,1478886185.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:05.416Z,1478886185.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:05.593Z,1478886185.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:05.824Z,1478886185.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:06.001Z,1478886186.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:06.232Z,1478886186.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:06.401Z,1478886186.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:06.640Z,1478886186.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:06.793Z,1478886186.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:07.048Z,1478886187.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:07.193Z,1478886187.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:07.456Z,1478886187.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:07.609Z,1478886187.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:07.864Z,1478886187.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:07.990Z,1478886187.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:08.272Z,1478886188.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:08.393Z,1478886188.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:08.680Z,1478886188.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:08.793Z,1478886188.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:09.088Z,1478886189.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:09.229Z,1478886189.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:09.496Z,1478886189.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:09.601Z,1478886189.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:09.904Z,1478886189.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:10.005Z,1478886190.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:10.407Z,1478886190.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:10.700Z,1478886190.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:10.793Z,1478886190.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:11.108Z,1478886191.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:11.209Z,1478886191.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:11.605Z,1478886191.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:11.904Z,1478886191.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:11.982Z,1478886191.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:12.413Z,1478886192.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:12.700Z,1478886192.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:12.810Z,1478886192.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:13.108Z,1478886193.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:13.194Z,1478886193.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:13.626Z,1478886193.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:13.904Z,1478886193.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:13.994Z,1478886193.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:14.403Z,1478886194.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:14.700Z,1478886194.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:14.865Z,1478886194.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:15.108Z,1478886195.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:15.210Z,1478886195.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:15.637Z,1478886195.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:15.904Z,1478886195.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:16.014Z,1478886196.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:16.400Z,1478886196.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:16.700Z,1478886196.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:16.801Z,1478886196.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:17.108Z,1478886197.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:17.197Z,1478886197.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:17.585Z,1478886197.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:17.904Z,1478886197.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:17.985Z,1478886197.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:18.385Z,1478886198.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:18.700Z,1478886198.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:18.793Z,1478886198.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:19.189Z,1478886199.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:19.424Z,1478886199.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:19.594Z,1478886199.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:20.001Z,1478886200.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:20.220Z,1478886200.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:20.395Z,1478886200.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:20.810Z,1478886200.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:21.016Z,1478886201.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:21.194Z,1478886201.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:21.424Z,1478886201.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:21.594Z,1478886201.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:21.991Z,1478886201.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:22.220Z,1478886202.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:22.389Z,1478886202.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:22.793Z,1478886202.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:22.952Z,1478886202.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:23.193Z,1478886203.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:23.593Z,1478886203.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:23.748Z,1478886203.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:23.997Z,1478886203.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:24.389Z,1478886204.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:24.544Z,1478886204.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:24.813Z,1478886204.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:24.952Z,1478886204.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:25.202Z,1478886205.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:25.613Z,1478886205.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:25.748Z,1478886205.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:26.002Z,1478886206.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:26.397Z,1478886206.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:26.544Z,1478886206.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:26.821Z,1478886206.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:26.996Z,1478886206.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:27.201Z,1478886207.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:27.601Z,1478886207.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:27.792Z,1478886207.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:28.588Z,1478886208.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:28.996Z,1478886208.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:29.792Z,1478886209.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:30.589Z,1478886210.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:31.060Z,1478886211.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:31.157Z,1478886211.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:31.304Z,1478886211.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:31.668Z,1478886211.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:31.856Z,1478886211.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:32.065Z,1478886212.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:32.465Z,1478886212.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:32.652Z,1478886212.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:32.869Z,1478886212.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:33.252Z,1478886213.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:33.404Z,1478886213.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:33.652Z,1478886213.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:34.047Z,1478886214.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:34.200Z,1478886214.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:34.449Z,1478886214.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:34.858Z,1478886214.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:34.997Z,1478886214.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:35.263Z,1478886215.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:35.404Z,1478886215.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:35.657Z,1478886215.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:36.073Z,1478886216.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:36.200Z,1478886216.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:36.505Z,1478886216.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:36.874Z,1478886216.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:36.980Z,1478886216.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:37.285Z,1478886217.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:37.645Z,1478886217.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:37.776Z,1478886217.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:38.081Z,1478886218.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:38.501Z,1478886218.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:38.572Z,1478886218.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:38.851Z,1478886218.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:38.980Z,1478886218.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:39.249Z,1478886219.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:39.658Z,1478886219.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:39.776Z,1478886219.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:40.050Z,1478886220.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:40.513Z,1478886220.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:40.572Z,1478886220.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:40.856Z,1478886220.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:40.980Z,1478886220.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:41.275Z,1478886221.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:41.666Z,1478886221.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:41.776Z,1478886221.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:42.062Z,1478886222.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:42.554Z,1478886222.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:42.572Z,1478886222.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:42.861Z,1478886222.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:42.980Z,1478886222.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:43.240Z,1478886223.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:43.669Z,1478886223.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:43.776Z,1478886223.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:44.040Z,1478886224.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:44.447Z,1478886224.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:44.581Z,1478886224.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:44.860Z,1478886224.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:45.024Z,1478886225.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:45.253Z,1478886225.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:45.652Z,1478886225.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:45.820Z,1478886225.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:46.075Z,1478886226.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:46.477Z,1478886226.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:46.616Z,1478886226.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:46.884Z,1478886226.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:47.273Z,1478886227.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:47.400Z,1478886227.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:47.668Z,1478886227.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:48.054Z,1478886228.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:48.196Z,1478886228.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:48.453Z,1478886228.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:48.848Z,1478886228.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:48.992Z,1478886228.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:49.251Z,1478886229.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:49.400Z,1478886229.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:49.664Z,1478886229.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:50.061Z,1478886230.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:50.196Z,1478886230.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:50.549Z,1478886230.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:50.862Z,1478886230.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:50.960Z,1478886230.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:51.260Z,1478886231.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:51.716Z,1478886231.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:51.764Z,1478886231.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:52.079Z,1478886232.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:52.526Z,1478886232.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:52.560Z,1478886232.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:52.900Z,1478886232.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:52.968Z,1478886232.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:53.277Z,1478886233.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:53.648Z,1478886233.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:53.764Z,1478886233.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:54.061Z,1478886234.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:54.503Z,1478886234.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:54.560Z,1478886234.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:54.869Z,1478886234.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:54.968Z,1478886234.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:55.251Z,1478886235.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:55.661Z,1478886235.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:55.764Z,1478886235.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:56.061Z,1478886236.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:56.529Z,1478886236.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:56.560Z,1478886236.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:56.877Z,1478886236.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:56.968Z,1478886236.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:57.275Z,1478886237.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:57.673Z,1478886237.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:57.764Z,1478886237.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:58.076Z,1478886238.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:58.452Z,1478886238.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:58.561Z,1478886238.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:58.862Z,1478886238.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:59.004Z,1478886239.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:43:59.253Z,1478886239.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:59.666Z,1478886239.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:43:59.800Z,1478886239.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:00.053Z,1478886240.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:00.463Z,1478886240.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:00.596Z,1478886240.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:00.865Z,1478886240.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:01.268Z,1478886241.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:01.384Z,1478886241.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:01.660Z,1478886241.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:02.070Z,1478886242.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:02.181Z,1478886242.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:02.460Z,1478886242.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:02.872Z,1478886242.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:02.976Z,1478886242.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:03.262Z,1478886243.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:03.388Z,1478886243.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:03.667Z,1478886243.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:04.038Z,1478886244.038 [PNI_TCM](ERROR): CRC does not match. Expected:0x20927 got:0x16962
2016-11-11T17:44:04.081Z,1478886244.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:04.186Z,1478886244.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:04.506Z,1478886244.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:04.885Z,1478886244.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:04.940Z,1478886244.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:05.291Z,1478886245.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:05.657Z,1478886245.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:05.736Z,1478886245.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:06.089Z,1478886246.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:06.518Z,1478886246.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:06.532Z,1478886246.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:06.893Z,1478886246.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:06.940Z,1478886246.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:07.293Z,1478886247.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:07.661Z,1478886247.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:07.736Z,1478886247.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:08.072Z,1478886248.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:08.514Z,1478886248.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:08.532Z,1478886248.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:08.842Z,1478886248.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:08.940Z,1478886248.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:09.266Z,1478886249.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:09.650Z,1478886249.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:09.736Z,1478886249.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:10.058Z,1478886250.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:10.526Z,1478886250.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:10.532Z,1478886250.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:10.873Z,1478886250.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:10.940Z,1478886250.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:11.244Z,1478886251.244 [PNI_TCM](ERROR): CRC does not match. Expected:0x39442 got:0x25527
2016-11-11T17:44:11.262Z,1478886251.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:11.654Z,1478886251.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:11.736Z,1478886251.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:12.064Z,1478886252.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:12.463Z,1478886252.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:12.533Z,1478886252.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:12.882Z,1478886252.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:13.008Z,1478886253.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:13.265Z,1478886253.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:13.669Z,1478886253.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:13.804Z,1478886253.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:14.065Z,1478886254.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:14.434Z,1478886254.434 [PNI_TCM](ERROR): CRC does not match. Expected:0x53 got:0x16830
2016-11-11T17:44:14.468Z,1478886254.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:14.600Z,1478886254.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:14.864Z,1478886254.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:15.253Z,1478886255.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:15.368Z,1478886255.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:15.650Z,1478886255.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:16.054Z,1478886256.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:16.164Z,1478886256.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:16.457Z,1478886256.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:16.851Z,1478886256.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:16.960Z,1478886256.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:17.269Z,1478886257.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:17.368Z,1478886257.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:17.670Z,1478886257.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:18.066Z,1478886258.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:18.164Z,1478886258.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:18.527Z,1478886258.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:18.862Z,1478886258.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:18.908Z,1478886258.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:19.305Z,1478886259.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:19.660Z,1478886259.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:19.704Z,1478886259.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:20.051Z,1478886260.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:20.500Z,1478886260.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:20.517Z,1478886260.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:20.860Z,1478886260.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:20.908Z,1478886260.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:21.273Z,1478886261.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:21.673Z,1478886261.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:21.704Z,1478886261.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:22.063Z,1478886262.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:22.481Z,1478886262.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:22.500Z,1478886262.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:22.876Z,1478886262.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:22.928Z,1478886262.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:23.280Z,1478886263.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:23.669Z,1478886263.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:23.724Z,1478886263.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:24.073Z,1478886264.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:24.485Z,1478886264.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:24.520Z,1478886264.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:24.857Z,1478886264.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:24.928Z,1478886264.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:25.260Z,1478886265.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:25.654Z,1478886265.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:25.724Z,1478886265.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:26.055Z,1478886266.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:26.449Z,1478886266.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:26.521Z,1478886266.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:26.849Z,1478886266.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:26.960Z,1478886266.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:27.260Z,1478886267.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:27.650Z,1478886267.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:27.756Z,1478886267.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:28.552Z,1478886268.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:29.324Z,1478886269.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:30.120Z,1478886270.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:30.916Z,1478886270.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:31.301Z,1478886271.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:31.344Z,1478886271.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:31.444Z,1478886271.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:31.779Z,1478886271.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:31.779Z,1478886271.779 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 238
2016-11-11T17:44:31.779Z,1478886271.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:44:31.802Z,1478886271.802 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:31.802Z,1478886271.802 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 238
2016-11-11T17:44:31.802Z,1478886271.802 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:44:31.808Z,1478886271.808 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:31.808Z,1478886271.809 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 238
2016-11-11T17:44:31.809Z,1478886271.809 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:44:31.840Z,1478886271.839 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:44:31.840Z,1478886271.840 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:44:31.840Z,1478886271.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:44:32.144Z,1478886272.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:32.230Z,1478886272.230 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:44:32.230Z,1478886272.230 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 238
2016-11-11T17:44:32.231Z,1478886272.231 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:44:32.231Z,1478886272.231 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 238
2016-11-11T17:44:32.232Z,1478886272.232 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:44:32.232Z,1478886272.232 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 238
2016-11-11T17:44:32.578Z,1478886272.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:44:32.578Z,1478886272.578 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:44:32.579Z,1478886272.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:44:32.584Z,1478886272.584 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:44:32.584Z,1478886272.584 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:44:32.585Z,1478886272.585 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:44:32.585Z,1478886272.585 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:44:32.585Z,1478886272.585 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:44:32.586Z,1478886272.586 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:44:32.844Z,1478886272.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:32.982Z,1478886272.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:33.376Z,1478886273.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:33.640Z,1478886273.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:33.801Z,1478886273.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:34.213Z,1478886274.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:34.437Z,1478886274.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:34.597Z,1478886274.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:34.844Z,1478886274.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:35.008Z,1478886275.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:35.371Z,1478886275.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:35.640Z,1478886275.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:35.801Z,1478886275.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:36.209Z,1478886276.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:36.437Z,1478886276.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:36.607Z,1478886276.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:36.848Z,1478886276.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:37.025Z,1478886277.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:37.379Z,1478886277.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:37.646Z,1478886277.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:37.785Z,1478886277.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:38.184Z,1478886278.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:38.440Z,1478886278.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:38.572Z,1478886278.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:38.848Z,1478886278.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:38.973Z,1478886278.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:39.381Z,1478886279.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:39.644Z,1478886279.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:39.774Z,1478886279.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:40.181Z,1478886280.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:40.440Z,1478886280.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:40.594Z,1478886280.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:40.972Z,1478886280.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:40.975Z,1478886280.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:41.379Z,1478886281.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:41.768Z,1478886281.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:41.786Z,1478886281.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:42.182Z,1478886282.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:42.564Z,1478886282.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:42.592Z,1478886282.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:42.986Z,1478886282.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:43.296Z,1478886283.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:43.386Z,1478886283.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:43.782Z,1478886283.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:44.092Z,1478886284.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:44.185Z,1478886284.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:44.580Z,1478886284.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:44.889Z,1478886284.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:44.974Z,1478886284.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:45.296Z,1478886285.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:45.381Z,1478886285.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:45.786Z,1478886285.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:46.092Z,1478886286.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:46.185Z,1478886286.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:46.588Z,1478886286.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:46.824Z,1478886286.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:46.978Z,1478886286.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:47.390Z,1478886287.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:47.622Z,1478886287.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:47.770Z,1478886287.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:48.221Z,1478886288.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:48.416Z,1478886288.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:48.598Z,1478886288.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:48.824Z,1478886288.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:49.004Z,1478886289.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:49.381Z,1478886289.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:49.620Z,1478886289.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:49.806Z,1478886289.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:50.206Z,1478886290.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:50.416Z,1478886290.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:50.587Z,1478886290.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:50.824Z,1478886290.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:50.991Z,1478886290.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:51.382Z,1478886291.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:51.620Z,1478886291.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:51.780Z,1478886291.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:52.183Z,1478886292.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:52.416Z,1478886292.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:52.584Z,1478886292.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:52.824Z,1478886292.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:52.973Z,1478886292.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:53.383Z,1478886293.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:53.620Z,1478886293.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:53.785Z,1478886293.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:54.185Z,1478886294.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:54.416Z,1478886294.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:54.601Z,1478886294.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:54.920Z,1478886294.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:54.990Z,1478886294.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:55.372Z,1478886295.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:55.716Z,1478886295.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:55.789Z,1478886295.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:56.181Z,1478886296.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:56.512Z,1478886296.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:56.585Z,1478886296.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:56.993Z,1478886296.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:57.276Z,1478886297.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:57.382Z,1478886297.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:57.784Z,1478886297.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:58.072Z,1478886298.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:58.181Z,1478886298.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:58.589Z,1478886298.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:58.868Z,1478886298.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:58.994Z,1478886298.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:59.276Z,1478886299.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:44:59.393Z,1478886299.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:44:59.765Z,1478886299.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:00.074Z,1478886300.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:00.169Z,1478886300.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:00.593Z,1478886300.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:00.804Z,1478886300.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:00.969Z,1478886300.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:01.373Z,1478886301.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:01.600Z,1478886301.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:01.770Z,1478886301.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:02.241Z,1478886302.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:02.396Z,1478886302.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:02.595Z,1478886302.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:02.836Z,1478886302.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:03.009Z,1478886303.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:03.369Z,1478886303.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:03.632Z,1478886303.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:03.801Z,1478886303.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:04.203Z,1478886304.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:04.429Z,1478886304.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:04.600Z,1478886304.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:04.840Z,1478886304.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:04.973Z,1478886304.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:05.377Z,1478886305.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:05.636Z,1478886305.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:05.775Z,1478886305.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:06.193Z,1478886306.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:06.432Z,1478886306.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:06.586Z,1478886306.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:06.840Z,1478886306.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:06.985Z,1478886306.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:07.380Z,1478886307.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:07.636Z,1478886307.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:07.801Z,1478886307.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:08.193Z,1478886308.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:08.433Z,1478886308.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:08.583Z,1478886308.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:08.900Z,1478886308.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:08.989Z,1478886308.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:09.381Z,1478886309.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:09.698Z,1478886309.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:09.777Z,1478886309.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:10.176Z,1478886310.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:10.492Z,1478886310.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:10.576Z,1478886310.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:10.981Z,1478886310.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:11.256Z,1478886311.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:11.383Z,1478886311.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:11.781Z,1478886311.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:12.052Z,1478886312.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:12.182Z,1478886312.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:12.580Z,1478886312.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:12.848Z,1478886312.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:12.976Z,1478886312.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:13.256Z,1478886313.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:13.380Z,1478886313.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:13.780Z,1478886313.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:14.054Z,1478886314.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:14.185Z,1478886314.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:14.587Z,1478886314.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:14.784Z,1478886314.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:14.989Z,1478886314.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:15.373Z,1478886315.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:15.581Z,1478886315.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:15.805Z,1478886315.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:16.179Z,1478886316.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:16.376Z,1478886316.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:16.634Z,1478886316.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:16.784Z,1478886316.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:16.974Z,1478886316.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:17.376Z,1478886317.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:17.580Z,1478886317.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:17.810Z,1478886317.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:18.182Z,1478886318.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:18.376Z,1478886318.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:18.618Z,1478886318.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:18.784Z,1478886318.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:19.029Z,1478886319.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:19.389Z,1478886319.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:19.580Z,1478886319.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:19.784Z,1478886319.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:20.181Z,1478886320.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:20.376Z,1478886320.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:20.584Z,1478886320.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:20.784Z,1478886320.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:20.979Z,1478886320.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:21.385Z,1478886321.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:21.580Z,1478886321.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:21.781Z,1478886321.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:22.185Z,1478886322.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:22.376Z,1478886322.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:22.589Z,1478886322.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:22.876Z,1478886322.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:22.990Z,1478886322.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:23.384Z,1478886323.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:23.672Z,1478886323.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:23.786Z,1478886323.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:24.181Z,1478886324.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:24.468Z,1478886324.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:24.589Z,1478886324.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:24.993Z,1478886324.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:25.232Z,1478886325.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:25.369Z,1478886325.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:25.769Z,1478886325.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:26.030Z,1478886326.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:26.173Z,1478886326.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:26.575Z,1478886326.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:26.825Z,1478886326.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:26.981Z,1478886326.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:27.232Z,1478886327.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:27.388Z,1478886327.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:27.774Z,1478886327.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:28.028Z,1478886328.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:28.177Z,1478886328.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:28.575Z,1478886328.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:28.764Z,1478886328.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:28.975Z,1478886328.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:29.560Z,1478886329.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:30.356Z,1478886330.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:30.768Z,1478886330.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:31.564Z,1478886331.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:32.360Z,1478886332.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:32.485Z,1478886332.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:32.613Z,1478886332.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:32.768Z,1478886332.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:32.992Z,1478886332.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:33.389Z,1478886333.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:33.565Z,1478886333.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:33.822Z,1478886333.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:34.198Z,1478886334.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:34.360Z,1478886334.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:34.609Z,1478886334.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:34.768Z,1478886334.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:35.009Z,1478886335.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:35.397Z,1478886335.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:35.564Z,1478886335.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:35.809Z,1478886335.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:36.181Z,1478886336.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:36.360Z,1478886336.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:36.589Z,1478886336.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:36.856Z,1478886336.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:36.981Z,1478886336.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:37.389Z,1478886337.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:37.654Z,1478886337.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:37.781Z,1478886337.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:38.181Z,1478886338.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:38.448Z,1478886338.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:38.585Z,1478886338.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:38.983Z,1478886338.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:39.216Z,1478886339.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:39.342Z,1478886339.342 [NAL9602](INFO): SBD MO Status=0, MOMSN=352, MT Status=0, MTMSN=0
2016-11-11T17:45:39.342Z,1478886339.342 [NAL9602](INFO): No messages in MT queue
2016-11-11T17:45:39.408Z,1478886339.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:39.792Z,1478886339.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:40.012Z,1478886340.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:40.194Z,1478886340.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:40.601Z,1478886340.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:40.808Z,1478886340.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:41.001Z,1478886341.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:41.216Z,1478886341.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:41.377Z,1478886341.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:41.789Z,1478886341.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:42.012Z,1478886342.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:42.193Z,1478886342.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:42.594Z,1478886342.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:42.740Z,1478886342.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:43.001Z,1478886343.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:43.407Z,1478886343.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:43.536Z,1478886343.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:43.800Z,1478886343.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:44.189Z,1478886344.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:44.332Z,1478886344.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:44.589Z,1478886344.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:44.740Z,1478886344.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:44.994Z,1478886344.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:45.377Z,1478886345.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:45.536Z,1478886345.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:45.803Z,1478886345.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:46.210Z,1478886346.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:46.332Z,1478886346.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:46.594Z,1478886346.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:46.744Z,1478886346.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:47.033Z,1478886347.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:47.433Z,1478886347.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:47.540Z,1478886347.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:47.789Z,1478886347.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:48.205Z,1478886348.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:48.336Z,1478886348.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:48.577Z,1478886348.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:48.744Z,1478886348.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:49.017Z,1478886349.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:49.433Z,1478886349.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:49.540Z,1478886349.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:49.800Z,1478886349.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:50.181Z,1478886350.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:50.336Z,1478886350.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:50.580Z,1478886350.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:50.820Z,1478886350.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:50.993Z,1478886350.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:51.389Z,1478886351.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:51.616Z,1478886351.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:51.800Z,1478886351.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:52.202Z,1478886352.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:52.412Z,1478886352.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:52.596Z,1478886352.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:52.993Z,1478886352.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:53.192Z,1478886353.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:53.389Z,1478886353.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:53.776Z,1478886353.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:53.988Z,1478886353.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:54.182Z,1478886354.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:54.585Z,1478886354.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:54.784Z,1478886354.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:54.986Z,1478886354.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:55.192Z,1478886355.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:55.391Z,1478886355.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:55.801Z,1478886355.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:55.988Z,1478886355.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:56.183Z,1478886356.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:56.593Z,1478886356.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:56.716Z,1478886356.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:56.978Z,1478886356.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:57.413Z,1478886357.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:57.512Z,1478886357.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:57.811Z,1478886357.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:58.191Z,1478886358.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:58.308Z,1478886358.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:58.605Z,1478886358.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:58.728Z,1478886358.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:58.989Z,1478886358.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:59.373Z,1478886359.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:45:59.524Z,1478886359.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:45:59.773Z,1478886359.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:00.193Z,1478886360.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:00.320Z,1478886360.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:00.597Z,1478886360.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:00.728Z,1478886360.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:00.997Z,1478886360.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:01.453Z,1478886361.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:01.524Z,1478886361.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:01.809Z,1478886361.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:02.178Z,1478886362.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:02.320Z,1478886362.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:02.605Z,1478886362.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:02.728Z,1478886362.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:02.986Z,1478886362.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:03.416Z,1478886363.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:03.524Z,1478886363.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:03.807Z,1478886363.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:04.216Z,1478886364.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:04.320Z,1478886364.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:04.617Z,1478886364.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:04.804Z,1478886364.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:04.988Z,1478886364.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:05.378Z,1478886365.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:05.600Z,1478886365.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:05.781Z,1478886365.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:06.184Z,1478886366.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:06.396Z,1478886366.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:06.584Z,1478886366.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:06.997Z,1478886366.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:07.156Z,1478886367.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:07.403Z,1478886367.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:07.797Z,1478886367.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:07.817Z,1478886367.817 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T17:46:07.952Z,1478886367.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:08.185Z,1478886368.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:08.606Z,1478886368.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:08.748Z,1478886368.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:08.973Z,1478886368.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:09.188Z,1478886369.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:09.397Z,1478886369.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:09.800Z,1478886369.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:09.984Z,1478886369.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:10.203Z,1478886370.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:10.605Z,1478886370.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:10.712Z,1478886370.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:10.981Z,1478886370.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:11.381Z,1478886371.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:11.508Z,1478886371.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:11.781Z,1478886371.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:12.192Z,1478886372.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:12.304Z,1478886372.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:12.592Z,1478886372.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:12.732Z,1478886372.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:13.007Z,1478886373.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:13.402Z,1478886373.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:13.528Z,1478886373.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:13.806Z,1478886373.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:14.180Z,1478886374.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:14.324Z,1478886374.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:14.582Z,1478886374.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:14.732Z,1478886374.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:15.005Z,1478886375.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:15.401Z,1478886375.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:15.528Z,1478886375.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:15.825Z,1478886375.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:16.273Z,1478886376.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:16.325Z,1478886376.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:16.591Z,1478886376.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:16.732Z,1478886376.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:16.984Z,1478886376.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:17.381Z,1478886377.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:17.528Z,1478886377.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:17.802Z,1478886377.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:18.192Z,1478886378.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:18.325Z,1478886378.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:18.625Z,1478886378.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:18.780Z,1478886378.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:19.020Z,1478886379.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:19.394Z,1478886379.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:19.576Z,1478886379.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:19.789Z,1478886379.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:20.187Z,1478886380.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:20.372Z,1478886380.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:20.588Z,1478886380.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:20.992Z,1478886380.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:21.140Z,1478886381.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:21.387Z,1478886381.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:21.794Z,1478886381.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:21.936Z,1478886381.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:22.208Z,1478886382.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:22.605Z,1478886382.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:22.732Z,1478886382.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:22.981Z,1478886382.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:23.152Z,1478886383.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:23.381Z,1478886383.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:23.781Z,1478886383.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:23.949Z,1478886383.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:24.189Z,1478886384.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:24.585Z,1478886384.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:24.700Z,1478886384.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:25.025Z,1478886385.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:25.401Z,1478886385.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:25.496Z,1478886385.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:25.799Z,1478886385.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:26.173Z,1478886386.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:26.292Z,1478886386.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:26.581Z,1478886386.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:26.708Z,1478886386.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:26.989Z,1478886386.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:27.384Z,1478886387.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:27.504Z,1478886387.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:27.805Z,1478886387.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:28.300Z,1478886388.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:28.708Z,1478886388.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:29.504Z,1478886389.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:30.300Z,1478886390.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:30.708Z,1478886390.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:31.504Z,1478886391.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:31.529Z,1478886391.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:31.669Z,1478886391.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:32.053Z,1478886392.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:32.306Z,1478886392.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:32.422Z,1478886392.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:32.756Z,1478886392.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:32.841Z,1478886392.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:33.245Z,1478886393.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:33.552Z,1478886393.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:33.625Z,1478886393.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:34.025Z,1478886394.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:34.348Z,1478886394.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:34.428Z,1478886394.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:34.815Z,1478886394.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:35.116Z,1478886395.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:35.214Z,1478886395.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:35.621Z,1478886395.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:35.912Z,1478886395.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:36.019Z,1478886396.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:36.417Z,1478886396.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:36.708Z,1478886396.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:36.833Z,1478886396.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:37.116Z,1478886397.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:37.228Z,1478886397.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:37.633Z,1478886397.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:37.912Z,1478886397.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:38.023Z,1478886398.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:38.425Z,1478886398.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:38.644Z,1478886398.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:38.820Z,1478886398.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:39.222Z,1478886399.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:39.440Z,1478886399.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:39.629Z,1478886399.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:40.033Z,1478886400.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:40.236Z,1478886400.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:40.437Z,1478886400.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:40.644Z,1478886400.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:40.805Z,1478886400.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:41.233Z,1478886401.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:41.440Z,1478886401.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:41.616Z,1478886401.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:42.013Z,1478886402.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:42.236Z,1478886402.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:42.421Z,1478886402.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:42.644Z,1478886402.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:42.822Z,1478886402.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:43.219Z,1478886403.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:43.440Z,1478886403.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:43.629Z,1478886403.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:44.011Z,1478886404.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:44.236Z,1478886404.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:44.429Z,1478886404.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:44.652Z,1478886404.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:44.818Z,1478886404.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:45.229Z,1478886405.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:45.450Z,1478886405.450 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:45.697Z,1478886405.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:46.028Z,1478886406.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:46.244Z,1478886406.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:46.453Z,1478886406.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:46.736Z,1478886406.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:46.820Z,1478886406.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:47.247Z,1478886407.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:47.532Z,1478886407.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:47.643Z,1478886407.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:48.013Z,1478886408.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:48.328Z,1478886408.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:48.414Z,1478886408.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:48.824Z,1478886408.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:49.096Z,1478886409.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:49.226Z,1478886409.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:49.625Z,1478886409.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:49.892Z,1478886409.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:50.014Z,1478886410.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:50.422Z,1478886410.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:50.688Z,1478886410.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:50.815Z,1478886410.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:51.096Z,1478886411.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:51.234Z,1478886411.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:51.634Z,1478886411.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:51.892Z,1478886411.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:52.031Z,1478886412.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:52.445Z,1478886412.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:52.624Z,1478886412.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:52.813Z,1478886412.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:53.213Z,1478886413.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:53.420Z,1478886413.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:53.617Z,1478886413.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:54.013Z,1478886414.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:54.216Z,1478886414.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:54.421Z,1478886414.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:54.624Z,1478886414.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:54.821Z,1478886414.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:55.226Z,1478886415.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:55.420Z,1478886415.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:55.625Z,1478886415.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:56.012Z,1478886416.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:56.216Z,1478886416.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:56.425Z,1478886416.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:56.624Z,1478886416.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:56.817Z,1478886416.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:57.221Z,1478886417.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:57.420Z,1478886417.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:57.635Z,1478886417.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:58.027Z,1478886418.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:58.216Z,1478886418.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:58.427Z,1478886418.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:58.624Z,1478886418.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:58.825Z,1478886418.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:59.224Z,1478886419.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:46:59.420Z,1478886419.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:46:59.715Z,1478886419.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:00.024Z,1478886420.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:00.216Z,1478886420.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:00.457Z,1478886420.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:00.728Z,1478886420.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:00.853Z,1478886420.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:01.289Z,1478886421.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:01.524Z,1478886421.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:01.653Z,1478886421.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:02.062Z,1478886422.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:02.320Z,1478886422.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:02.446Z,1478886422.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:02.846Z,1478886422.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:03.112Z,1478886423.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:03.218Z,1478886423.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:03.638Z,1478886423.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:03.909Z,1478886423.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:04.042Z,1478886424.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:04.444Z,1478886424.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:04.704Z,1478886424.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:04.840Z,1478886424.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:05.112Z,1478886425.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:05.230Z,1478886425.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:05.640Z,1478886425.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:05.908Z,1478886425.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:06.041Z,1478886426.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:06.414Z,1478886426.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:06.641Z,1478886426.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:06.832Z,1478886426.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:07.272Z,1478886427.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:07.436Z,1478886427.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:07.630Z,1478886427.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:08.023Z,1478886428.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:08.232Z,1478886428.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:08.425Z,1478886428.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:08.640Z,1478886428.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:08.844Z,1478886428.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:09.209Z,1478886429.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:09.436Z,1478886429.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:09.637Z,1478886429.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:10.053Z,1478886430.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:10.232Z,1478886430.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:10.445Z,1478886430.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:10.640Z,1478886430.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:10.813Z,1478886430.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:11.241Z,1478886431.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:11.436Z,1478886431.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:11.621Z,1478886431.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:12.017Z,1478886432.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:12.232Z,1478886432.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:12.438Z,1478886432.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:12.640Z,1478886432.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:12.823Z,1478886432.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:13.254Z,1478886433.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:13.436Z,1478886433.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:13.665Z,1478886433.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:14.070Z,1478886434.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:14.233Z,1478886434.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:14.419Z,1478886434.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:14.756Z,1478886434.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:14.857Z,1478886434.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:15.225Z,1478886435.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:15.552Z,1478886435.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:15.670Z,1478886435.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:16.073Z,1478886436.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:16.348Z,1478886436.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:16.437Z,1478886436.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:16.841Z,1478886436.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:17.056Z,1478886437.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:17.211Z,1478886437.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:17.607Z,1478886437.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:17.852Z,1478886437.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:18.021Z,1478886438.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:18.411Z,1478886438.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:18.648Z,1478886438.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:18.815Z,1478886438.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:19.222Z,1478886439.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:19.444Z,1478886439.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:19.615Z,1478886439.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:20.009Z,1478886440.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:20.240Z,1478886440.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:20.405Z,1478886440.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:20.810Z,1478886440.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:21.036Z,1478886441.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:21.209Z,1478886441.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:21.618Z,1478886441.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:21.832Z,1478886441.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:22.019Z,1478886442.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:22.419Z,1478886442.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:22.628Z,1478886442.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:22.821Z,1478886442.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:23.213Z,1478886443.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:23.424Z,1478886443.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:23.629Z,1478886443.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:24.009Z,1478886444.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:24.220Z,1478886444.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:24.413Z,1478886444.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:24.818Z,1478886444.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:25.016Z,1478886445.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:25.229Z,1478886445.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:25.615Z,1478886445.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:25.812Z,1478886445.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:26.013Z,1478886446.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:26.404Z,1478886446.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:26.608Z,1478886446.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:26.810Z,1478886446.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:27.265Z,1478886447.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:27.274Z,1478886447.274 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T17:42:27.2Z
2016-11-11T17:47:27.275Z,1478886447.274 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T17:47:27.275Z,1478886447.275 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T17:47:27.404Z,1478886447.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:27.622Z,1478886447.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:28.200Z,1478886448.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:28.996Z,1478886448.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:29.792Z,1478886449.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:30.588Z,1478886450.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:31.384Z,1478886451.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:32.180Z,1478886452.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:32.976Z,1478886452.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:33.772Z,1478886453.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:34.568Z,1478886454.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:35.364Z,1478886455.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:36.160Z,1478886456.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:36.956Z,1478886456.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:37.752Z,1478886457.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:38.548Z,1478886458.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:39.344Z,1478886459.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:40.140Z,1478886460.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:40.812Z,1478886460.812 [BPC1](ERROR): Failed to receive battery data
2016-11-11T17:47:40.812Z,1478886460.812 [BPC1] Communications Fault, FailCount= 1
2016-11-11T17:47:40.812Z,1478886460.812 [BPC1](ERROR): Communications Fault
2016-11-11T17:47:40.845Z,1478886460.845 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:40.845Z,1478886460.845 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 239
2016-11-11T17:47:40.845Z,1478886460.845 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:47:40.877Z,1478886460.877 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:40.877Z,1478886460.877 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 239
2016-11-11T17:47:40.877Z,1478886460.877 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:47:40.892Z,1478886460.892 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:40.892Z,1478886460.892 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 239
2016-11-11T17:47:40.892Z,1478886460.892 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:47:40.936Z,1478886460.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:40.948Z,1478886460.948 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:47:40.948Z,1478886460.948 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:47:40.949Z,1478886460.949 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:47:40.949Z,1478886460.949 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T17:47:41.344Z,1478886461.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:41.752Z,1478886461.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:42.160Z,1478886462.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:42.568Z,1478886462.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:42.976Z,1478886462.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:43.384Z,1478886463.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:43.792Z,1478886463.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:44.200Z,1478886464.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:44.608Z,1478886464.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:45.016Z,1478886465.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:45.424Z,1478886465.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:45.832Z,1478886465.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:46.240Z,1478886466.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:46.648Z,1478886466.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:47.056Z,1478886467.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:47.852Z,1478886467.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:48.556Z,1478886468.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:49.352Z,1478886469.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:49.577Z,1478886469.577 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:47:49.577Z,1478886469.577 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 239
2016-11-11T17:47:49.578Z,1478886469.578 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:47:49.578Z,1478886469.578 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 239
2016-11-11T17:47:49.578Z,1478886469.579 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:47:49.579Z,1478886469.579 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 239
2016-11-11T17:47:49.627Z,1478886469.627 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0300.lzma
2016-11-11T17:47:49.721Z,1478886469.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:47:49.722Z,1478886469.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:47:49.722Z,1478886469.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:47:49.747Z,1478886469.747 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:47:49.748Z,1478886469.748 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:47:49.748Z,1478886469.748 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:47:49.749Z,1478886469.749 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:47:49.749Z,1478886469.749 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:47:49.749Z,1478886469.749 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:47:50.119Z,1478886470.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:50.148Z,1478886470.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:50.205Z,1478886470.205 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:47:50.206Z,1478886470.205 [BPC1] No Fault, FailCount= 1
2016-11-11T17:47:50.421Z,1478886470.421 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0300.lzma.bak
2016-11-11T17:47:50.422Z,1478886470.422 [DataOverHttps](INFO): SBD MOMSN=4555624
2016-11-11T17:47:50.585Z,1478886470.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:50.604Z,1478886470.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:51.400Z,1478886471.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:52.196Z,1478886472.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:52.604Z,1478886472.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:52.958Z,1478886472.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:53.128Z,1478886473.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:53.400Z,1478886473.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:54.196Z,1478886474.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:54.604Z,1478886474.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:55.400Z,1478886475.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:56.197Z,1478886476.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:56.992Z,1478886476.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:57.416Z,1478886477.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:58.212Z,1478886478.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:58.980Z,1478886478.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:58.990Z,1478886478.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:59.080Z,1478886479.080 [NAL9602](INFO): Powering down
2016-11-11T17:47:59.141Z,1478886479.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:59.492Z,1478886479.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:47:59.776Z,1478886479.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:47:59.893Z,1478886479.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:00.293Z,1478886480.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:00.572Z,1478886480.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:00.697Z,1478886480.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:00.984Z,1478886480.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:01.780Z,1478886481.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:02.504Z,1478886482.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:03.300Z,1478886483.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:04.096Z,1478886484.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:04.304Z,1478886484.304 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T17:48:04.304Z,1478886484.304 [BPC1] Data Fault, FailCount= 2
2016-11-11T17:48:04.304Z,1478886484.304 [BPC1](ERROR): Data Fault
2016-11-11T17:48:04.312Z,1478886484.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:04.368Z,1478886484.368 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T17:48:04.387Z,1478886484.387 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20161111T044527/Express0301.lzma
2016-11-11T17:48:04.467Z,1478886484.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:04.532Z,1478886484.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:04.819Z,1478886484.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:05.177Z,1478886485.177 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0301.lzma.bak
2016-11-11T17:48:05.178Z,1478886485.178 [DataOverHttps](INFO): SBD MOMSN=4555626
2016-11-11T17:48:05.251Z,1478886485.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:05.271Z,1478886485.271 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:48:05.271Z,1478886485.271 [BPC1] No Fault, FailCount= 2
2016-11-11T17:48:05.328Z,1478886485.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:06.124Z,1478886486.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:06.532Z,1478886486.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:06.699Z,1478886486.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:06.708Z,1478886486.708 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T17:48:06.709Z,1478886486.708 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T17:48:06.709Z,1478886486.709 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T17:48:06.834Z,1478886486.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:07.328Z,1478886487.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:08.124Z,1478886488.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:08.532Z,1478886488.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:09.328Z,1478886489.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:10.125Z,1478886490.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:10.373Z,1478886490.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:10.506Z,1478886490.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:10.612Z,1478886490.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:10.880Z,1478886490.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:11.245Z,1478886491.245 [PNI_TCM](ERROR): CRC does not match. Expected:0x51161 got:0x38896
2016-11-11T17:48:11.275Z,1478886491.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:11.408Z,1478886491.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:11.650Z,1478886491.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:12.065Z,1478886492.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:12.204Z,1478886492.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:12.454Z,1478886492.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:12.858Z,1478886492.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:12.968Z,1478886492.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:13.259Z,1478886493.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:13.655Z,1478886493.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:13.764Z,1478886493.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:14.052Z,1478886494.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:14.459Z,1478886494.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:14.560Z,1478886494.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:14.841Z,1478886494.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:14.976Z,1478886494.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:15.269Z,1478886495.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:15.641Z,1478886495.641 [PNI_TCM](ERROR): CRC does not match. Expected:0x33246 got:0x50203
2016-11-11T17:48:15.683Z,1478886495.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:15.772Z,1478886495.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:16.093Z,1478886496.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:16.448Z,1478886496.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:16.528Z,1478886496.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:16.850Z,1478886496.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:17.250Z,1478886497.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:17.324Z,1478886497.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:17.655Z,1478886497.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:18.120Z,1478886498.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:18.124Z,1478886498.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:18.454Z,1478886498.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:18.556Z,1478886498.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:18.850Z,1478886498.850 [PNI_TCM](ERROR): CRC does not match. Expected:0x12838 got:0x50204
2016-11-11T17:48:18.879Z,1478886498.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:19.253Z,1478886499.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:19.352Z,1478886499.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:19.653Z,1478886499.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:20.108Z,1478886500.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:20.148Z,1478886500.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:20.465Z,1478886500.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:20.560Z,1478886500.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:20.897Z,1478886500.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:21.253Z,1478886501.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:21.356Z,1478886501.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:21.651Z,1478886501.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:22.104Z,1478886502.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:22.152Z,1478886502.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:22.509Z,1478886502.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:22.560Z,1478886502.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:22.861Z,1478886502.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:23.251Z,1478886503.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:23.356Z,1478886503.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:23.673Z,1478886503.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:24.059Z,1478886504.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:24.153Z,1478886504.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:24.490Z,1478886504.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:24.620Z,1478886504.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:24.890Z,1478886504.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:25.252Z,1478886505.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:25.416Z,1478886505.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:25.652Z,1478886505.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:26.048Z,1478886506.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:26.212Z,1478886506.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:26.520Z,1478886506.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:26.856Z,1478886506.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:26.952Z,1478886506.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:27.250Z,1478886507.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:27.657Z,1478886507.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:27.748Z,1478886507.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:28.060Z,1478886508.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:28.515Z,1478886508.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:28.544Z,1478886508.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:28.860Z,1478886508.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:28.952Z,1478886508.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:29.260Z,1478886509.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:29.650Z,1478886509.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:29.748Z,1478886509.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:30.120Z,1478886510.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:30.484Z,1478886510.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:30.485Z,1478886510.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:30.865Z,1478886510.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:31.270Z,1478886511.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:31.280Z,1478886511.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:31.647Z,1478886511.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:32.078Z,1478886512.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:32.080Z,1478886512.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:32.469Z,1478886512.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:32.500Z,1478886512.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:32.855Z,1478886512.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:33.252Z,1478886513.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:33.296Z,1478886513.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:33.657Z,1478886513.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:34.064Z,1478886514.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:34.092Z,1478886514.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:34.453Z,1478886514.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:34.888Z,1478886514.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:34.920Z,1478886514.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:35.254Z,1478886515.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:35.296Z,1478886515.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:35.680Z,1478886515.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:36.073Z,1478886516.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:36.092Z,1478886516.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:36.449Z,1478886516.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:36.500Z,1478886516.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:36.905Z,1478886516.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:37.246Z,1478886517.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:37.296Z,1478886517.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:37.651Z,1478886517.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:38.093Z,1478886518.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:38.122Z,1478886518.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:38.469Z,1478886518.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:38.592Z,1478886518.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:38.880Z,1478886518.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:39.291Z,1478886519.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:39.388Z,1478886519.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:39.649Z,1478886519.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:40.053Z,1478886520.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:40.184Z,1478886520.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:40.519Z,1478886520.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:40.853Z,1478886520.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:40.944Z,1478886520.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:41.246Z,1478886521.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:41.648Z,1478886521.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:41.740Z,1478886521.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:42.069Z,1478886522.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:42.525Z,1478886522.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:42.536Z,1478886522.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:42.849Z,1478886522.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:43.000Z,1478886523.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:43.245Z,1478886523.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:43.650Z,1478886523.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:43.796Z,1478886523.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:44.074Z,1478886524.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:44.456Z,1478886524.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:44.460Z,1478886524.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:44.865Z,1478886524.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:45.250Z,1478886525.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:45.256Z,1478886525.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:45.656Z,1478886525.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:46.052Z,1478886526.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:46.074Z,1478886526.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:46.456Z,1478886526.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:46.472Z,1478886526.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:46.853Z,1478886526.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:47.260Z,1478886527.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:47.268Z,1478886527.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:47.655Z,1478886527.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:48.064Z,1478886528.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:48.080Z,1478886528.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:48.461Z,1478886528.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:48.472Z,1478886528.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:48.860Z,1478886528.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:49.260Z,1478886529.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:49.268Z,1478886529.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:49.660Z,1478886529.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:50.064Z,1478886530.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:50.080Z,1478886530.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:50.472Z,1478886530.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:50.489Z,1478886530.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:50.853Z,1478886530.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:51.268Z,1478886531.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:51.283Z,1478886531.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:51.651Z,1478886531.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:52.065Z,1478886532.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:52.117Z,1478886532.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:52.457Z,1478886532.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:52.556Z,1478886532.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:52.905Z,1478886532.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:53.306Z,1478886533.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:53.352Z,1478886533.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:53.660Z,1478886533.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:54.060Z,1478886534.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:54.148Z,1478886534.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:54.526Z,1478886534.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:54.840Z,1478886534.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:54.904Z,1478886534.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:55.242Z,1478886535.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:55.645Z,1478886535.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:55.700Z,1478886535.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:56.047Z,1478886536.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:56.496Z,1478886536.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:56.510Z,1478886536.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:56.853Z,1478886536.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:56.972Z,1478886536.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:57.247Z,1478886537.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:57.658Z,1478886537.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:57.768Z,1478886537.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:58.057Z,1478886538.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:58.418Z,1478886538.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:58.461Z,1478886538.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:58.860Z,1478886538.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:59.214Z,1478886539.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:48:59.262Z,1478886539.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:48:59.660Z,1478886539.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:00.008Z,1478886540.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:00.088Z,1478886540.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:00.416Z,1478886540.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:00.445Z,1478886540.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:00.840Z,1478886540.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:01.212Z,1478886541.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:01.245Z,1478886541.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:01.646Z,1478886541.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:02.008Z,1478886542.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:02.054Z,1478886542.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:02.418Z,1478886542.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:02.456Z,1478886542.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:02.852Z,1478886542.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:03.214Z,1478886543.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:03.253Z,1478886543.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:03.659Z,1478886543.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:04.008Z,1478886544.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:04.105Z,1478886544.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:04.418Z,1478886544.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:04.461Z,1478886544.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:04.860Z,1478886544.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:05.214Z,1478886545.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:05.258Z,1478886545.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:05.673Z,1478886545.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:06.008Z,1478886546.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:06.105Z,1478886546.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:06.489Z,1478886546.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:06.556Z,1478886546.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:06.847Z,1478886546.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:07.283Z,1478886547.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:07.352Z,1478886547.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:08.148Z,1478886548.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:08.864Z,1478886548.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:09.661Z,1478886549.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:10.456Z,1478886550.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:10.870Z,1478886550.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:10.916Z,1478886550.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:11.006Z,1478886551.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:11.376Z,1478886551.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:11.712Z,1478886551.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:11.778Z,1478886551.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:12.176Z,1478886552.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:12.384Z,1478886552.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:12.584Z,1478886552.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:12.977Z,1478886552.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:13.180Z,1478886553.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:13.376Z,1478886553.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:13.777Z,1478886553.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:13.976Z,1478886553.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:14.225Z,1478886554.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:14.384Z,1478886554.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:14.576Z,1478886554.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:14.979Z,1478886554.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:15.180Z,1478886555.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:15.386Z,1478886555.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:15.775Z,1478886555.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:15.976Z,1478886555.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:16.183Z,1478886556.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:16.384Z,1478886556.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:16.585Z,1478886556.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:16.977Z,1478886556.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:17.180Z,1478886557.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:17.381Z,1478886557.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:17.779Z,1478886557.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:17.976Z,1478886557.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:18.176Z,1478886558.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:18.384Z,1478886558.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:18.578Z,1478886558.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:18.986Z,1478886558.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:19.180Z,1478886559.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:19.378Z,1478886559.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:19.785Z,1478886559.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:19.976Z,1478886559.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:20.178Z,1478886560.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:20.476Z,1478886560.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:20.580Z,1478886560.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:20.984Z,1478886560.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:21.272Z,1478886561.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:21.394Z,1478886561.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:21.778Z,1478886561.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:22.068Z,1478886562.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:22.197Z,1478886562.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:22.613Z,1478886562.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:22.836Z,1478886562.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:22.980Z,1478886562.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:23.397Z,1478886563.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:23.632Z,1478886563.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:23.789Z,1478886563.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:24.209Z,1478886564.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:24.429Z,1478886564.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:24.621Z,1478886564.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:24.840Z,1478886564.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:24.994Z,1478886564.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:25.398Z,1478886565.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:25.636Z,1478886565.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:25.777Z,1478886565.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:26.179Z,1478886566.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:26.360Z,1478886566.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:26.573Z,1478886566.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:26.976Z,1478886566.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:27.156Z,1478886567.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:27.374Z,1478886567.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:27.775Z,1478886567.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:27.953Z,1478886567.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:28.182Z,1478886568.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:28.368Z,1478886568.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:28.575Z,1478886568.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:28.979Z,1478886568.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:29.164Z,1478886569.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:29.385Z,1478886569.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:29.777Z,1478886569.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:29.960Z,1478886569.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:30.196Z,1478886570.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:30.368Z,1478886570.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:30.585Z,1478886570.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:30.986Z,1478886570.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:31.164Z,1478886571.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:31.378Z,1478886571.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:31.785Z,1478886571.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:31.960Z,1478886571.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:32.186Z,1478886572.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:32.368Z,1478886572.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:32.578Z,1478886572.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:32.990Z,1478886572.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:33.164Z,1478886573.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:33.386Z,1478886573.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:33.778Z,1478886573.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:33.962Z,1478886573.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:34.189Z,1478886574.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:34.461Z,1478886574.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:34.577Z,1478886574.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:34.978Z,1478886574.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:35.256Z,1478886575.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:35.398Z,1478886575.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:35.784Z,1478886575.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:36.052Z,1478886576.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:36.184Z,1478886576.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:36.609Z,1478886576.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:36.812Z,1478886576.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:36.988Z,1478886576.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:37.388Z,1478886577.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:37.608Z,1478886577.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:37.801Z,1478886577.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:38.188Z,1478886578.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:38.404Z,1478886578.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:38.605Z,1478886578.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:38.812Z,1478886578.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:39.035Z,1478886579.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:39.396Z,1478886579.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:39.608Z,1478886579.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:39.768Z,1478886579.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:40.197Z,1478886580.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:40.344Z,1478886580.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:40.589Z,1478886580.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:40.975Z,1478886580.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:41.140Z,1478886581.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:41.397Z,1478886581.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:41.782Z,1478886581.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:41.936Z,1478886581.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:42.181Z,1478886582.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:42.344Z,1478886582.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:42.581Z,1478886582.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:42.990Z,1478886582.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:43.140Z,1478886583.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:43.378Z,1478886583.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:43.782Z,1478886583.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:43.936Z,1478886583.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:44.186Z,1478886584.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:44.344Z,1478886584.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:44.576Z,1478886584.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:44.985Z,1478886584.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:45.140Z,1478886585.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:45.386Z,1478886585.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:45.778Z,1478886585.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:45.936Z,1478886585.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:46.194Z,1478886586.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:46.344Z,1478886586.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:46.588Z,1478886586.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:46.982Z,1478886586.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:47.140Z,1478886587.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:47.384Z,1478886587.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:47.789Z,1478886587.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:47.936Z,1478886587.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:48.185Z,1478886588.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:48.432Z,1478886588.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:48.584Z,1478886588.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:48.989Z,1478886588.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:49.228Z,1478886589.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:49.388Z,1478886589.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:49.809Z,1478886589.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:50.024Z,1478886590.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:50.189Z,1478886590.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:50.585Z,1478886590.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:50.794Z,1478886590.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:51.009Z,1478886591.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:51.381Z,1478886591.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:51.588Z,1478886591.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:51.784Z,1478886591.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:52.209Z,1478886592.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:52.384Z,1478886592.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:52.586Z,1478886592.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:52.792Z,1478886592.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:53.017Z,1478886593.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:53.412Z,1478886593.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:53.588Z,1478886593.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:53.786Z,1478886593.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:54.177Z,1478886594.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:54.320Z,1478886594.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:54.571Z,1478886594.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:54.981Z,1478886594.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:55.116Z,1478886595.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:55.375Z,1478886595.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:55.774Z,1478886595.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:55.912Z,1478886595.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:56.196Z,1478886596.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:56.336Z,1478886596.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:56.568Z,1478886596.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:56.975Z,1478886596.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:57.134Z,1478886597.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:57.406Z,1478886597.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:57.774Z,1478886597.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:57.928Z,1478886597.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:58.185Z,1478886598.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:58.336Z,1478886598.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:58.581Z,1478886598.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:58.975Z,1478886598.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:59.132Z,1478886599.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:49:59.374Z,1478886599.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:59.781Z,1478886599.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:49:59.928Z,1478886599.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:00.178Z,1478886600.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:00.336Z,1478886600.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:00.585Z,1478886600.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:00.982Z,1478886600.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:01.132Z,1478886601.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:01.385Z,1478886601.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:01.787Z,1478886601.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:01.928Z,1478886601.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:02.198Z,1478886602.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:02.412Z,1478886602.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:02.584Z,1478886602.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:02.993Z,1478886602.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:03.208Z,1478886603.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:03.373Z,1478886603.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:03.773Z,1478886603.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:04.004Z,1478886604.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:04.176Z,1478886604.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:04.579Z,1478886604.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:04.772Z,1478886604.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:04.974Z,1478886604.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:05.437Z,1478886605.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:05.568Z,1478886605.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:05.825Z,1478886605.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:06.178Z,1478886606.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:06.364Z,1478886606.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:06.581Z,1478886606.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:06.780Z,1478886606.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:07.022Z,1478886607.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:07.378Z,1478886607.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:07.576Z,1478886607.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:08.308Z,1478886608.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:09.104Z,1478886609.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:09.900Z,1478886609.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:10.308Z,1478886610.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:10.828Z,1478886610.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:10.981Z,1478886610.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:11.104Z,1478886611.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:11.365Z,1478886611.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:11.702Z,1478886611.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:11.900Z,1478886611.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:12.109Z,1478886612.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:12.308Z,1478886612.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:12.509Z,1478886612.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:12.909Z,1478886612.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:13.104Z,1478886613.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:13.344Z,1478886613.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:13.714Z,1478886613.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:13.900Z,1478886613.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:14.115Z,1478886614.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:14.308Z,1478886614.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:14.512Z,1478886614.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:14.920Z,1478886614.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:15.104Z,1478886615.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:15.294Z,1478886615.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:15.694Z,1478886615.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:15.900Z,1478886615.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:16.119Z,1478886616.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:16.392Z,1478886616.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:16.510Z,1478886616.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:16.948Z,1478886616.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:17.188Z,1478886617.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:17.305Z,1478886617.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:17.717Z,1478886617.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:17.984Z,1478886617.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:18.116Z,1478886618.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:18.531Z,1478886618.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:18.748Z,1478886618.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:18.922Z,1478886618.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:19.317Z,1478886619.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:19.546Z,1478886619.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:19.715Z,1478886619.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:20.095Z,1478886620.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:20.340Z,1478886620.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:20.497Z,1478886620.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:20.748Z,1478886620.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:20.899Z,1478886620.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:21.303Z,1478886621.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:21.544Z,1478886621.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:21.702Z,1478886621.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:22.109Z,1478886622.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:22.280Z,1478886622.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:22.502Z,1478886622.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:22.913Z,1478886622.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:23.076Z,1478886623.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:23.329Z,1478886623.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:23.729Z,1478886623.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:23.872Z,1478886623.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:24.106Z,1478886624.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:24.280Z,1478886624.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:24.505Z,1478886624.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:24.940Z,1478886624.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:25.076Z,1478886625.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:25.301Z,1478886625.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:25.739Z,1478886625.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:25.872Z,1478886625.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:26.144Z,1478886626.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:26.284Z,1478886626.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:26.512Z,1478886626.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:26.911Z,1478886626.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:27.080Z,1478886627.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:27.312Z,1478886627.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:27.712Z,1478886627.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:27.876Z,1478886627.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:28.111Z,1478886628.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:28.285Z,1478886628.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:28.509Z,1478886628.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:28.912Z,1478886628.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:29.080Z,1478886629.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:29.315Z,1478886629.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:29.725Z,1478886629.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:29.876Z,1478886629.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:30.123Z,1478886630.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:30.380Z,1478886630.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:30.512Z,1478886630.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:30.912Z,1478886630.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:31.176Z,1478886631.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:31.320Z,1478886631.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:31.711Z,1478886631.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:31.972Z,1478886631.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:32.106Z,1478886632.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:32.513Z,1478886632.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:32.720Z,1478886632.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:32.912Z,1478886632.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:33.350Z,1478886633.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:33.516Z,1478886633.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:33.708Z,1478886633.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:34.125Z,1478886634.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:34.312Z,1478886634.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:34.524Z,1478886634.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:34.720Z,1478886634.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:34.949Z,1478886634.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:35.313Z,1478886635.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:35.516Z,1478886635.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:35.701Z,1478886635.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:36.109Z,1478886636.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:36.248Z,1478886636.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:36.509Z,1478886636.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:36.917Z,1478886636.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:37.046Z,1478886637.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:37.294Z,1478886637.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:37.741Z,1478886637.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:37.840Z,1478886637.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:38.157Z,1478886638.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:38.264Z,1478886638.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:38.503Z,1478886638.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:38.941Z,1478886638.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:39.060Z,1478886639.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:39.303Z,1478886639.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:39.742Z,1478886639.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:39.856Z,1478886639.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:40.134Z,1478886640.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:40.264Z,1478886640.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:40.512Z,1478886640.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:40.906Z,1478886640.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:41.060Z,1478886641.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:41.319Z,1478886641.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:41.710Z,1478886641.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:41.856Z,1478886641.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:42.110Z,1478886642.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:42.264Z,1478886642.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:42.511Z,1478886642.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:42.909Z,1478886642.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:43.060Z,1478886643.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:43.309Z,1478886643.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:43.711Z,1478886643.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:43.856Z,1478886643.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:44.104Z,1478886644.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:44.352Z,1478886644.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:44.513Z,1478886644.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:44.911Z,1478886644.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:45.148Z,1478886645.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:45.336Z,1478886645.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:45.711Z,1478886645.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:45.946Z,1478886645.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:46.139Z,1478886646.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:46.528Z,1478886646.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:46.720Z,1478886646.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:46.914Z,1478886646.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:47.299Z,1478886647.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:47.518Z,1478886647.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:47.718Z,1478886647.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:48.112Z,1478886648.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:48.312Z,1478886648.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:48.509Z,1478886648.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:48.720Z,1478886648.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:48.918Z,1478886648.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:49.320Z,1478886649.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:49.516Z,1478886649.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:49.727Z,1478886649.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:49.727Z,1478886649.727 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 240
2016-11-11T17:50:49.728Z,1478886649.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:50:49.828Z,1478886649.828 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:50:50.109Z,1478886650.109 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:50.109Z,1478886650.109 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 240
2016-11-11T17:50:50.109Z,1478886650.109 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:50:50.111Z,1478886650.111 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:50.112Z,1478886650.112 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 240
2016-11-11T17:50:50.112Z,1478886650.112 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:50:50.168Z,1478886650.168 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:50:50.168Z,1478886650.168 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 240
2016-11-11T17:50:50.169Z,1478886650.169 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:50:50.169Z,1478886650.169 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:50:50.264Z,1478886650.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:50.513Z,1478886650.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:50:50.514Z,1478886650.514 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:50:50.514Z,1478886650.514 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:50:50.544Z,1478886650.544 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:50:50.544Z,1478886650.545 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 240
2016-11-11T17:50:50.545Z,1478886650.545 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:50:50.545Z,1478886650.545 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 240
2016-11-11T17:50:50.922Z,1478886650.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:50.927Z,1478886650.927 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:50:50.928Z,1478886650.928 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:50:50.928Z,1478886650.928 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:50:50.928Z,1478886650.928 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:50:50.929Z,1478886650.929 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:50:50.929Z,1478886650.929 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:50:51.060Z,1478886651.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:51.361Z,1478886651.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:51.741Z,1478886651.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:51.856Z,1478886651.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:52.102Z,1478886652.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:52.272Z,1478886652.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:52.509Z,1478886652.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:52.929Z,1478886652.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:53.070Z,1478886653.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:53.309Z,1478886653.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:53.739Z,1478886653.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:53.864Z,1478886653.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:54.149Z,1478886654.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:54.272Z,1478886654.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:54.511Z,1478886654.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:54.904Z,1478886654.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:55.068Z,1478886655.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:55.306Z,1478886655.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:55.719Z,1478886655.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:55.864Z,1478886655.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:56.124Z,1478886656.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:56.272Z,1478886656.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:56.494Z,1478886656.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:56.901Z,1478886656.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:57.068Z,1478886657.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:57.311Z,1478886657.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:57.725Z,1478886657.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:57.865Z,1478886657.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:58.106Z,1478886658.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:58.316Z,1478886658.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:58.517Z,1478886658.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:58.913Z,1478886658.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:59.112Z,1478886659.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:50:59.312Z,1478886659.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:59.714Z,1478886659.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:50:59.908Z,1478886659.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:00.112Z,1478886660.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:00.513Z,1478886660.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:00.676Z,1478886660.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:00.905Z,1478886660.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:01.313Z,1478886661.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:01.472Z,1478886661.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:01.714Z,1478886661.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:02.114Z,1478886662.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:02.268Z,1478886662.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:02.561Z,1478886662.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:02.676Z,1478886662.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:02.933Z,1478886662.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:03.310Z,1478886663.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:03.474Z,1478886663.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:03.709Z,1478886663.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:04.111Z,1478886664.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:04.228Z,1478886664.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:04.511Z,1478886664.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:04.934Z,1478886664.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:05.024Z,1478886665.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:05.315Z,1478886665.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:05.725Z,1478886665.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:05.820Z,1478886665.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:06.149Z,1478886666.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:06.240Z,1478886666.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:06.546Z,1478886666.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:06.914Z,1478886666.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:07.036Z,1478886667.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:07.347Z,1478886667.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:07.721Z,1478886667.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:07.832Z,1478886667.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:08.240Z,1478886668.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:09.036Z,1478886669.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:09.833Z,1478886669.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:10.244Z,1478886670.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:11.040Z,1478886671.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:11.169Z,1478886671.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:11.298Z,1478886671.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:11.695Z,1478886671.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:11.837Z,1478886671.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:12.079Z,1478886672.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:12.300Z,1478886672.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:12.473Z,1478886672.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:12.883Z,1478886672.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:13.096Z,1478886673.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:13.275Z,1478886673.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:13.674Z,1478886673.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:13.892Z,1478886673.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:14.080Z,1478886674.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:14.474Z,1478886674.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:14.660Z,1478886674.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:14.878Z,1478886674.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:15.287Z,1478886675.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:15.458Z,1478886675.458 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:15.683Z,1478886675.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:16.079Z,1478886676.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:16.252Z,1478886676.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:16.483Z,1478886676.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:16.660Z,1478886676.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:16.883Z,1478886676.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:17.280Z,1478886677.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:17.456Z,1478886677.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:17.687Z,1478886677.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:18.073Z,1478886678.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:18.200Z,1478886678.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:18.472Z,1478886678.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:18.881Z,1478886678.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:18.996Z,1478886678.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:19.329Z,1478886679.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:19.747Z,1478886679.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:19.792Z,1478886679.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:20.097Z,1478886680.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:20.216Z,1478886680.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:20.501Z,1478886680.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:20.893Z,1478886680.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:21.012Z,1478886681.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:21.273Z,1478886681.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:21.677Z,1478886681.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:21.808Z,1478886681.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:22.080Z,1478886682.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:22.216Z,1478886682.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:22.520Z,1478886682.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:22.899Z,1478886682.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:23.012Z,1478886683.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:23.311Z,1478886683.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:23.748Z,1478886683.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:23.808Z,1478886683.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:24.095Z,1478886684.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:24.220Z,1478886684.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:24.489Z,1478886684.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:24.922Z,1478886684.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:25.016Z,1478886685.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:25.301Z,1478886685.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:25.709Z,1478886685.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:25.818Z,1478886685.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:26.114Z,1478886686.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:26.272Z,1478886686.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:26.501Z,1478886686.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:26.872Z,1478886686.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:27.068Z,1478886687.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:27.283Z,1478886687.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:27.675Z,1478886687.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:27.864Z,1478886687.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:28.085Z,1478886688.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:28.487Z,1478886688.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:28.632Z,1478886688.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:28.879Z,1478886688.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:29.284Z,1478886689.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:29.428Z,1478886689.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:29.689Z,1478886689.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:30.091Z,1478886690.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:30.224Z,1478886690.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:30.475Z,1478886690.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:30.632Z,1478886690.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:30.880Z,1478886690.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:31.274Z,1478886691.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:31.428Z,1478886691.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:31.684Z,1478886691.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:32.090Z,1478886692.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:32.192Z,1478886692.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:32.491Z,1478886692.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:32.883Z,1478886692.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:32.988Z,1478886692.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:33.289Z,1478886693.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:33.722Z,1478886693.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:33.784Z,1478886693.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:34.096Z,1478886694.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:34.204Z,1478886694.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:34.479Z,1478886694.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:34.883Z,1478886694.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:34.000Z,1478886695.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:35.279Z,1478886695.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:35.681Z,1478886695.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:35.796Z,1478886695.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:36.131Z,1478886696.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:36.204Z,1478886696.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:36.489Z,1478886696.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:36.873Z,1478886696.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:36.000Z,1478886697.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:37.322Z,1478886697.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:37.709Z,1478886697.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:37.796Z,1478886697.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:38.093Z,1478886698.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:38.204Z,1478886698.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:38.528Z,1478886698.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:38.878Z,1478886698.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:38.000Z,1478886699.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:39.274Z,1478886699.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:39.709Z,1478886699.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:39.797Z,1478886699.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:40.075Z,1478886700.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:40.256Z,1478886700.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:40.515Z,1478886700.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:40.918Z,1478886700.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:41.054Z,1478886701.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:41.289Z,1478886701.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:41.713Z,1478886701.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:41.848Z,1478886701.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:42.100Z,1478886702.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:42.473Z,1478886702.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:42.628Z,1478886702.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:42.883Z,1478886702.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:43.271Z,1478886703.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:43.424Z,1478886703.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:43.680Z,1478886703.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:44.087Z,1478886704.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:44.220Z,1478886704.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:44.471Z,1478886704.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:44.628Z,1478886704.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:44.877Z,1478886704.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:45.283Z,1478886705.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:45.424Z,1478886705.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:45.743Z,1478886705.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:46.079Z,1478886706.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:46.164Z,1478886706.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:46.485Z,1478886706.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:46.879Z,1478886706.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:46.961Z,1478886706.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:47.287Z,1478886707.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:47.751Z,1478886707.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:47.756Z,1478886707.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:48.095Z,1478886708.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:48.164Z,1478886708.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:48.474Z,1478886708.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:48.882Z,1478886708.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:48.960Z,1478886708.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:49.279Z,1478886709.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:49.751Z,1478886709.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:49.756Z,1478886709.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:50.104Z,1478886710.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:50.176Z,1478886710.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:50.482Z,1478886710.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:50.881Z,1478886710.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:50.972Z,1478886710.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:51.283Z,1478886711.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:51.768Z,1478886711.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:51.782Z,1478886711.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:52.093Z,1478886712.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:52.176Z,1478886712.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:52.505Z,1478886712.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:52.921Z,1478886712.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:52.972Z,1478886712.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:53.291Z,1478886713.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:53.703Z,1478886713.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:53.769Z,1478886713.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:54.082Z,1478886714.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:54.248Z,1478886714.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:54.521Z,1478886714.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:54.924Z,1478886714.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:55.044Z,1478886715.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:55.295Z,1478886715.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:55.689Z,1478886715.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:55.840Z,1478886715.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:56.069Z,1478886716.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:56.498Z,1478886716.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:56.636Z,1478886716.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:56.950Z,1478886716.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:57.315Z,1478886717.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:57.432Z,1478886717.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:57.718Z,1478886717.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:58.164Z,1478886718.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:58.228Z,1478886718.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:58.549Z,1478886718.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:58.636Z,1478886718.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:58.898Z,1478886718.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:59.309Z,1478886719.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:51:59.432Z,1478886719.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:51:59.785Z,1478886719.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:00.129Z,1478886720.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:00.172Z,1478886720.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:00.513Z,1478886720.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:00.929Z,1478886720.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:00.968Z,1478886720.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:01.298Z,1478886721.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:01.746Z,1478886721.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:01.764Z,1478886721.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:02.102Z,1478886722.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:02.208Z,1478886722.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:02.510Z,1478886722.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:02.886Z,1478886722.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:03.004Z,1478886723.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:03.298Z,1478886723.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:03.731Z,1478886723.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:03.800Z,1478886723.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:04.113Z,1478886724.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:04.208Z,1478886724.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:04.470Z,1478886724.470 [PNI_TCM](ERROR): CRC does not match. Expected:0x2044 got:0x64364
2016-11-11T17:52:04.497Z,1478886724.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:04.871Z,1478886724.871 [PNI_TCM](ERROR): CRC does not match. Expected:0x43006 got:0x49152
2016-11-11T17:52:04.905Z,1478886724.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:05.004Z,1478886725.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:05.298Z,1478886725.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:05.757Z,1478886725.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:05.800Z,1478886725.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:06.086Z,1478886726.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:06.479Z,1478886726.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:06.596Z,1478886726.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:06.913Z,1478886726.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:07.298Z,1478886727.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:07.392Z,1478886727.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:07.671Z,1478886727.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:08.112Z,1478886728.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:08.188Z,1478886728.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:08.984Z,1478886728.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:09.440Z,1478886729.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:09.848Z,1478886729.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:10.644Z,1478886730.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:11.052Z,1478886731.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:11.848Z,1478886731.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:12.584Z,1478886732.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:13.380Z,1478886733.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:14.140Z,1478886734.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:14.936Z,1478886734.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:14.995Z,1478886734.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:15.193Z,1478886735.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:15.596Z,1478886735.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:15.732Z,1478886735.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:15.963Z,1478886735.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:16.164Z,1478886736.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:16.338Z,1478886736.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:16.752Z,1478886736.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:16.960Z,1478886736.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:17.141Z,1478886737.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:17.549Z,1478886737.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:17.756Z,1478886737.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:17.934Z,1478886737.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:18.164Z,1478886738.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:18.337Z,1478886738.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:18.730Z,1478886738.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:18.960Z,1478886738.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:19.147Z,1478886739.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:19.547Z,1478886739.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:19.756Z,1478886739.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:19.918Z,1478886739.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:20.164Z,1478886740.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:20.355Z,1478886740.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:20.757Z,1478886740.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:20.960Z,1478886740.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:21.138Z,1478886741.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:21.541Z,1478886741.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:21.757Z,1478886741.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:21.952Z,1478886741.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:22.200Z,1478886742.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:22.340Z,1478886742.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:22.742Z,1478886742.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:22.996Z,1478886742.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:23.133Z,1478886743.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:23.538Z,1478886743.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:23.794Z,1478886743.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:23.942Z,1478886743.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:24.347Z,1478886744.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:24.564Z,1478886744.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:24.726Z,1478886744.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:25.145Z,1478886745.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:25.360Z,1478886745.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:25.534Z,1478886745.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:25.942Z,1478886745.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:26.156Z,1478886746.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:26.378Z,1478886746.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:26.564Z,1478886746.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:26.736Z,1478886746.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:27.149Z,1478886747.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:27.360Z,1478886747.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:27.585Z,1478886747.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:27.946Z,1478886747.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:28.108Z,1478886748.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:28.350Z,1478886748.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:28.766Z,1478886748.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:28.904Z,1478886748.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:29.153Z,1478886749.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:29.545Z,1478886749.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:29.700Z,1478886749.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:29.965Z,1478886749.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:30.108Z,1478886750.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:30.325Z,1478886750.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:30.724Z,1478886750.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:30.906Z,1478886750.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:31.125Z,1478886751.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:31.534Z,1478886751.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:31.700Z,1478886751.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:31.921Z,1478886751.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:32.108Z,1478886752.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:32.325Z,1478886752.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:32.722Z,1478886752.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:32.904Z,1478886752.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:33.123Z,1478886753.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:33.527Z,1478886753.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:33.700Z,1478886753.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:33.936Z,1478886753.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:34.108Z,1478886754.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:34.332Z,1478886754.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:34.737Z,1478886754.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:34.904Z,1478886754.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:35.136Z,1478886755.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:35.524Z,1478886755.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:35.701Z,1478886755.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:35.941Z,1478886755.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:36.164Z,1478886756.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:36.321Z,1478886756.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:36.721Z,1478886756.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:36.960Z,1478886756.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:37.145Z,1478886757.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:37.525Z,1478886757.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:37.756Z,1478886757.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:37.925Z,1478886757.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:38.329Z,1478886758.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:38.524Z,1478886758.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:38.728Z,1478886758.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:39.124Z,1478886759.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:39.320Z,1478886759.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:39.533Z,1478886759.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:39.937Z,1478886759.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:40.117Z,1478886760.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:40.334Z,1478886760.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:40.528Z,1478886760.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:40.763Z,1478886760.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:41.122Z,1478886761.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:41.326Z,1478886761.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:41.521Z,1478886761.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:41.927Z,1478886761.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:42.068Z,1478886762.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:42.375Z,1478886762.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:42.723Z,1478886762.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:42.864Z,1478886762.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:43.129Z,1478886763.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:43.632Z,1478886763.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:43.660Z,1478886763.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:43.916Z,1478886763.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:44.092Z,1478886764.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:44.342Z,1478886764.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:44.770Z,1478886764.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:44.888Z,1478886764.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:45.119Z,1478886765.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:45.521Z,1478886765.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:45.684Z,1478886765.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:45.941Z,1478886765.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:46.092Z,1478886766.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:46.330Z,1478886766.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:46.742Z,1478886766.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:46.888Z,1478886766.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:47.154Z,1478886767.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:47.519Z,1478886767.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:47.684Z,1478886767.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:47.935Z,1478886767.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:48.092Z,1478886768.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:48.336Z,1478886768.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:48.724Z,1478886768.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:48.888Z,1478886768.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:49.121Z,1478886769.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:49.521Z,1478886769.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:49.685Z,1478886769.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:49.923Z,1478886769.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:50.148Z,1478886770.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:50.329Z,1478886770.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:50.723Z,1478886770.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:50.944Z,1478886770.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:51.127Z,1478886771.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:51.530Z,1478886771.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:51.740Z,1478886771.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:51.937Z,1478886771.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:52.332Z,1478886772.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:52.500Z,1478886772.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:52.731Z,1478886772.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:53.132Z,1478886773.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:53.296Z,1478886773.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:53.526Z,1478886773.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:53.924Z,1478886773.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:54.095Z,1478886774.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:54.325Z,1478886774.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:54.504Z,1478886774.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:54.723Z,1478886774.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:55.123Z,1478886775.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:55.300Z,1478886775.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:55.588Z,1478886775.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:55.948Z,1478886775.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:56.060Z,1478886776.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:56.343Z,1478886776.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:56.753Z,1478886776.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:56.856Z,1478886776.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:57.123Z,1478886777.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:57.525Z,1478886777.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:57.652Z,1478886777.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:57.970Z,1478886777.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:58.061Z,1478886778.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:58.332Z,1478886778.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:58.749Z,1478886778.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:58.856Z,1478886778.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:59.153Z,1478886779.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:59.532Z,1478886779.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:52:59.652Z,1478886779.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:52:59.943Z,1478886779.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:00.060Z,1478886780.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:00.328Z,1478886780.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:00.726Z,1478886780.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:00.857Z,1478886780.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:01.139Z,1478886781.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:01.544Z,1478886781.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:01.652Z,1478886781.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:01.921Z,1478886781.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:02.064Z,1478886782.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:02.321Z,1478886782.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:02.722Z,1478886782.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:02.860Z,1478886782.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:03.123Z,1478886783.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:03.529Z,1478886783.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:03.657Z,1478886783.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:03.941Z,1478886783.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:04.121Z,1478886784.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:04.341Z,1478886784.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:04.720Z,1478886784.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:04.916Z,1478886784.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:05.120Z,1478886785.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:05.529Z,1478886785.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:05.713Z,1478886785.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:05.949Z,1478886785.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:06.355Z,1478886786.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:06.488Z,1478886786.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:06.738Z,1478886786.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:07.147Z,1478886787.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:07.166Z,1478886787.166 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T17:53:07.166Z,1478886787.166 [Default:CheckIn:C.Wait] Stopped
2016-11-11T17:53:07.166Z,1478886787.166 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T17:53:07.166Z,1478886787.166 [Default:CheckIn:D] Running Loop=1
2016-11-11T17:53:07.284Z,1478886787.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:07.524Z,1478886787.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:07.549Z,1478886787.549 [Default:CheckIn:D] Stopped
2016-11-11T17:53:07.549Z,1478886787.549 [Default:CheckIn:E] Running Loop=1
2016-11-11T17:53:07.924Z,1478886787.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:07.941Z,1478886787.941 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 783.103971 min 
2016-11-11T17:53:07.941Z,1478886787.941 [Default:CheckIn:E] Stopped
2016-11-11T17:53:07.942Z,1478886787.941 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T17:53:07.942Z,1478886787.942 [Default:CheckIn] Stopped
2016-11-11T17:53:07.942Z,1478886787.942 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T17:53:07.942Z,1478886787.942 [Default:CheckIn](INFO): Running loop #76
2016-11-11T17:53:07.942Z,1478886787.942 [Default:CheckIn] Running Loop=76
2016-11-11T17:53:07.942Z,1478886787.942 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T17:53:07.942Z,1478886787.942 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T17:53:08.080Z,1478886788.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:08.329Z,1478886788.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:08.492Z,1478886788.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:09.288Z,1478886789.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:10.032Z,1478886790.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:10.828Z,1478886790.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:11.624Z,1478886791.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:11.723Z,1478886791.723 [NAL9602](INFO): Powering up
2016-11-11T17:53:11.793Z,1478886791.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:11.933Z,1478886791.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:12.032Z,1478886792.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:12.296Z,1478886792.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:12.700Z,1478886792.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:12.828Z,1478886792.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:13.096Z,1478886793.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:13.496Z,1478886793.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:13.624Z,1478886793.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:13.908Z,1478886793.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:14.032Z,1478886794.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:14.274Z,1478886794.274 [BPC1](ERROR): Failed to receive battery data
2016-11-11T17:53:14.274Z,1478886794.274 [BPC1] Communications Fault, FailCount= 1
2016-11-11T17:53:14.274Z,1478886794.274 [BPC1](ERROR): Communications Fault
2016-11-11T17:53:14.318Z,1478886794.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:14.351Z,1478886794.351 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T17:53:14.687Z,1478886794.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:14.828Z,1478886794.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:15.093Z,1478886795.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:15.498Z,1478886795.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:15.572Z,1478886795.572 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:53:15.572Z,1478886795.572 [BPC1] No Fault, FailCount= 1
2016-11-11T17:53:15.624Z,1478886795.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:15.946Z,1478886795.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:16.032Z,1478886796.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:16.336Z,1478886796.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:16.699Z,1478886796.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:16.828Z,1478886796.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:17.105Z,1478886797.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:17.480Z,1478886797.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:17.624Z,1478886797.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:17.885Z,1478886797.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:18.100Z,1478886798.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:18.285Z,1478886798.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:18.693Z,1478886798.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:18.896Z,1478886798.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:19.088Z,1478886799.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:19.486Z,1478886799.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:19.692Z,1478886799.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:19.890Z,1478886799.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:20.287Z,1478886800.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:20.480Z,1478886800.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:20.693Z,1478886800.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:21.099Z,1478886801.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:21.276Z,1478886801.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:21.494Z,1478886801.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:21.899Z,1478886801.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:22.072Z,1478886802.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:22.302Z,1478886802.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:22.480Z,1478886802.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:22.657Z,1478886802.657 [NAL9602](INFO): NAL9602 initialized
2016-11-11T17:53:22.705Z,1478886802.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:23.085Z,1478886803.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:23.276Z,1478886803.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:23.452Z,1478886803.452 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T17:53:23.452Z,1478886803.452 [NAL9602] Data Fault, FailCount= 1
2016-11-11T17:53:23.452Z,1478886803.452 [NAL9602](ERROR): Data Fault
2016-11-11T17:53:23.489Z,1478886803.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:23.602Z,1478886803.602 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T17:53:23.848Z,1478886803.848 [NAL9602](INFO): Powering down
2016-11-11T17:53:23.896Z,1478886803.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:24.024Z,1478886804.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:24.293Z,1478886804.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:24.689Z,1478886804.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:24.709Z,1478886804.708 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T17:53:24.709Z,1478886804.709 [NAL9602] No Fault, FailCount= 1
2016-11-11T17:53:24.820Z,1478886804.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:25.100Z,1478886805.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:25.501Z,1478886805.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:25.616Z,1478886805.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:25.889Z,1478886805.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:26.024Z,1478886806.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:26.296Z,1478886806.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:26.687Z,1478886806.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:26.820Z,1478886806.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:27.093Z,1478886807.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:27.481Z,1478886807.481 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T17:53:27.481Z,1478886807.481 [BPC1] Data Fault, FailCount= 2
2016-11-11T17:53:27.481Z,1478886807.481 [BPC1](ERROR): Data Fault
2016-11-11T17:53:27.494Z,1478886807.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:27.573Z,1478886807.573 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T17:53:27.616Z,1478886807.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:27.899Z,1478886807.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:28.024Z,1478886808.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:28.300Z,1478886808.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:28.688Z,1478886808.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:28.720Z,1478886808.720 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:53:28.720Z,1478886808.720 [BPC1] No Fault, FailCount= 2
2016-11-11T17:53:28.820Z,1478886808.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:29.049Z,1478886809.049 [NAL9602](INFO): Powering up NAL9602
2016-11-11T17:53:29.145Z,1478886809.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:29.564Z,1478886809.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:29.616Z,1478886809.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:29.880Z,1478886809.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:30.024Z,1478886810.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:30.285Z,1478886810.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:30.687Z,1478886810.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:30.820Z,1478886810.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:31.088Z,1478886811.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:31.491Z,1478886811.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:31.617Z,1478886811.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:31.897Z,1478886811.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:32.080Z,1478886812.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:32.287Z,1478886812.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:32.693Z,1478886812.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:32.876Z,1478886812.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:33.085Z,1478886813.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:33.485Z,1478886813.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:33.672Z,1478886813.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:33.887Z,1478886813.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:34.285Z,1478886814.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:34.436Z,1478886814.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:34.687Z,1478886814.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:35.086Z,1478886815.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:35.232Z,1478886815.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:35.491Z,1478886815.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:35.890Z,1478886815.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:36.029Z,1478886816.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:36.285Z,1478886816.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:36.444Z,1478886816.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:36.689Z,1478886816.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:37.093Z,1478886817.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:37.240Z,1478886817.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:37.487Z,1478886817.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:37.879Z,1478886817.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:38.024Z,1478886818.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:38.289Z,1478886818.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:38.687Z,1478886818.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:38.820Z,1478886818.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:39.102Z,1478886819.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:39.517Z,1478886819.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:39.616Z,1478886819.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:39.901Z,1478886819.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:40.024Z,1478886820.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:40.253Z,1478886820.253 [NAL9602](INFO): NAL9602 initialized
2016-11-11T17:53:40.300Z,1478886820.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:40.697Z,1478886820.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:40.820Z,1478886820.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:41.103Z,1478886821.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:41.571Z,1478886821.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:41.616Z,1478886821.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:41.965Z,1478886821.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:42.024Z,1478886822.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:42.285Z,1478886822.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:42.733Z,1478886822.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:42.820Z,1478886822.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:43.087Z,1478886823.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:43.573Z,1478886823.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:43.616Z,1478886823.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:43.928Z,1478886823.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:44.024Z,1478886824.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:44.296Z,1478886824.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:44.689Z,1478886824.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:44.820Z,1478886824.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:45.092Z,1478886825.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:45.503Z,1478886825.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:45.617Z,1478886825.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:45.905Z,1478886825.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:46.068Z,1478886826.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:46.296Z,1478886826.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:46.689Z,1478886826.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:46.865Z,1478886826.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:47.092Z,1478886827.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:47.492Z,1478886827.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:47.660Z,1478886827.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:47.893Z,1478886827.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:48.308Z,1478886828.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:48.428Z,1478886828.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:48.713Z,1478886828.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:49.117Z,1478886829.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:49.224Z,1478886829.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:49.510Z,1478886829.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:49.910Z,1478886829.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:50.020Z,1478886830.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:50.317Z,1478886830.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:50.436Z,1478886830.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:50.720Z,1478886830.720 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:50.720Z,1478886830.720 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 241
2016-11-11T17:53:50.720Z,1478886830.720 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:53:50.740Z,1478886830.740 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:53:51.109Z,1478886831.109 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:51.109Z,1478886831.109 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 241
2016-11-11T17:53:51.109Z,1478886831.109 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:53:51.115Z,1478886831.115 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:51.115Z,1478886831.115 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 241
2016-11-11T17:53:51.115Z,1478886831.115 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:53:51.142Z,1478886831.142 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:53:51.142Z,1478886831.142 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 241
2016-11-11T17:53:51.143Z,1478886831.143 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:53:51.147Z,1478886831.147 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:53:51.232Z,1478886831.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:51.552Z,1478886831.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:53:51.552Z,1478886831.552 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:53:51.552Z,1478886831.552 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:53:51.619Z,1478886831.619 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:53:51.620Z,1478886831.620 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 241
2016-11-11T17:53:51.620Z,1478886831.620 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:53:51.620Z,1478886831.620 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 241
2016-11-11T17:53:51.898Z,1478886831.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:51.903Z,1478886831.903 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:53:51.904Z,1478886831.904 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:53:51.904Z,1478886831.904 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:53:51.904Z,1478886831.904 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:53:51.905Z,1478886831.905 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:53:51.905Z,1478886831.905 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:53:51.972Z,1478886831.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:52.302Z,1478886832.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:52.701Z,1478886832.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:52.768Z,1478886832.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:53.090Z,1478886833.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:53.548Z,1478886833.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:53.564Z,1478886833.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:53.912Z,1478886833.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:53.980Z,1478886833.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:54.308Z,1478886834.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:54.700Z,1478886834.700 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T17:53:54.700Z,1478886834.700 [BPC1] Data Fault, FailCount= 1
2016-11-11T17:53:54.700Z,1478886834.700 [BPC1](ERROR): Data Fault
2016-11-11T17:53:54.709Z,1478886834.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:54.753Z,1478886834.753 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T17:53:54.776Z,1478886834.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:55.114Z,1478886835.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:55.572Z,1478886835.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:55.600Z,1478886835.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:55.906Z,1478886835.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:55.926Z,1478886835.926 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:53:55.927Z,1478886835.927 [BPC1] No Fault, FailCount= 1
2016-11-11T17:53:55.980Z,1478886835.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:56.360Z,1478886836.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:56.690Z,1478886836.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:56.776Z,1478886836.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:57.129Z,1478886837.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:57.534Z,1478886837.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:57.572Z,1478886837.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:57.896Z,1478886837.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:57.992Z,1478886837.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:58.299Z,1478886838.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:58.706Z,1478886838.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:58.788Z,1478886838.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:59.109Z,1478886839.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:59.510Z,1478886839.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:53:59.585Z,1478886839.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:53:59.900Z,1478886839.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:00.052Z,1478886840.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:00.301Z,1478886840.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:00.697Z,1478886840.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:00.848Z,1478886840.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:01.101Z,1478886841.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:01.497Z,1478886841.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:01.644Z,1478886841.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:01.905Z,1478886841.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:02.282Z,1478886842.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:02.420Z,1478886842.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:02.684Z,1478886842.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:03.083Z,1478886843.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:03.216Z,1478886843.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:03.511Z,1478886843.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:03.912Z,1478886843.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:04.012Z,1478886844.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:04.310Z,1478886844.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:04.420Z,1478886844.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:04.682Z,1478886844.682 [PNI_TCM](ERROR): CRC does not match. Expected:0x32419 got:0x3074
2016-11-11T17:54:04.717Z,1478886844.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:05.117Z,1478886845.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:05.216Z,1478886845.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:05.542Z,1478886845.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:05.909Z,1478886845.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:05.000Z,1478886846.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:06.312Z,1478886846.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:06.705Z,1478886846.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:06.796Z,1478886846.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:07.084Z,1478886847.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:07.567Z,1478886847.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:07.592Z,1478886847.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:07.896Z,1478886847.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:07.000Z,1478886848.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:08.309Z,1478886848.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:08.689Z,1478886848.690 [PNI_TCM](ERROR): CRC does not match. Expected:0x24103 got:0x49579
2016-11-11T17:54:08.717Z,1478886848.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:08.796Z,1478886848.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:09.592Z,1478886849.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:09.000Z,1478886850.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:10.796Z,1478886850.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:11.592Z,1478886851.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:11.000Z,1478886852.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:12.321Z,1478886852.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:12.449Z,1478886852.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:12.796Z,1478886852.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:12.850Z,1478886852.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:13.216Z,1478886853.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:13.600Z,1478886853.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:13.673Z,1478886853.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:14.042Z,1478886854.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:14.057Z,1478886854.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:14.426Z,1478886854.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:14.825Z,1478886854.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:14.860Z,1478886854.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:15.237Z,1478886855.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:15.627Z,1478886855.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:15.668Z,1478886855.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:16.048Z,1478886856.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:16.400Z,1478886856.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:16.433Z,1478886856.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:16.817Z,1478886856.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:17.198Z,1478886857.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:17.217Z,1478886857.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:17.625Z,1478886857.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:17.992Z,1478886857.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:18.035Z,1478886858.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:18.400Z,1478886858.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:18.420Z,1478886858.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:18.821Z,1478886858.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:19.196Z,1478886859.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:19.229Z,1478886859.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:19.617Z,1478886859.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:19.900Z,1478886859.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:20.023Z,1478886860.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:20.426Z,1478886860.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:20.697Z,1478886860.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:20.824Z,1478886860.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:21.227Z,1478886861.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:21.493Z,1478886861.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:21.625Z,1478886861.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:21.900Z,1478886861.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:22.025Z,1478886862.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:22.436Z,1478886862.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:22.696Z,1478886862.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:22.826Z,1478886862.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:23.220Z,1478886863.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:23.492Z,1478886863.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:23.641Z,1478886863.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:23.900Z,1478886863.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:24.037Z,1478886864.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:24.433Z,1478886864.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:24.696Z,1478886864.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:24.813Z,1478886864.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:25.222Z,1478886865.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:25.492Z,1478886865.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:25.616Z,1478886865.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:25.900Z,1478886865.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:26.025Z,1478886866.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:26.469Z,1478886866.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:26.696Z,1478886866.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:26.828Z,1478886866.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:27.250Z,1478886867.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:27.492Z,1478886867.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:27.643Z,1478886867.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:28.056Z,1478886868.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:28.062Z,1478886868.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:28.446Z,1478886868.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:28.825Z,1478886868.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:28.852Z,1478886868.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:29.214Z,1478886869.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:29.617Z,1478886869.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:29.648Z,1478886869.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:30.021Z,1478886870.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:30.352Z,1478886870.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:30.422Z,1478886870.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:30.827Z,1478886870.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:31.148Z,1478886871.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:31.222Z,1478886871.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:31.624Z,1478886871.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:31.944Z,1478886871.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:32.017Z,1478886872.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:32.417Z,1478886872.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:32.740Z,1478886872.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:32.821Z,1478886872.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:33.148Z,1478886873.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:33.213Z,1478886873.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:33.638Z,1478886873.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:33.884Z,1478886873.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:34.014Z,1478886874.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:34.415Z,1478886874.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:34.680Z,1478886874.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:34.816Z,1478886874.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:35.221Z,1478886875.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:35.477Z,1478886875.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:35.625Z,1478886875.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:35.884Z,1478886875.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:36.020Z,1478886876.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:36.425Z,1478886876.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:36.680Z,1478886876.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:36.841Z,1478886876.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:37.227Z,1478886877.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:37.476Z,1478886877.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:37.621Z,1478886877.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:37.884Z,1478886877.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:38.025Z,1478886878.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:38.429Z,1478886878.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:38.680Z,1478886878.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:38.833Z,1478886878.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:39.222Z,1478886879.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:39.476Z,1478886879.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:39.614Z,1478886879.614 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T17:54:39.614Z,1478886879.614 [BPC1] Data Fault, FailCount= 1
2016-11-11T17:54:39.614Z,1478886879.614 [BPC1](ERROR): Data Fault
2016-11-11T17:54:39.623Z,1478886879.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:39.675Z,1478886879.675 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T17:54:39.884Z,1478886879.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:40.020Z,1478886880.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:40.421Z,1478886880.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:40.680Z,1478886880.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:40.818Z,1478886880.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:40.838Z,1478886880.838 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:54:40.839Z,1478886880.839 [BPC1] No Fault, FailCount= 1
2016-11-11T17:54:41.285Z,1478886881.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:41.476Z,1478886881.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:41.669Z,1478886881.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:41.988Z,1478886881.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:42.026Z,1478886882.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:42.420Z,1478886882.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:42.784Z,1478886882.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:42.847Z,1478886882.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:43.235Z,1478886883.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:43.580Z,1478886883.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:43.614Z,1478886883.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:44.029Z,1478886884.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:44.332Z,1478886884.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:44.433Z,1478886884.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:44.829Z,1478886884.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:45.128Z,1478886885.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:45.226Z,1478886885.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:45.626Z,1478886885.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:45.924Z,1478886885.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:46.032Z,1478886886.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:46.332Z,1478886886.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:46.437Z,1478886886.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:46.833Z,1478886886.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:47.128Z,1478886887.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:47.208Z,1478886887.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:47.625Z,1478886887.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:47.856Z,1478886887.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:48.020Z,1478886888.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:48.421Z,1478886888.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:48.652Z,1478886888.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:48.829Z,1478886888.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:49.225Z,1478886889.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:49.450Z,1478886889.450 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:49.624Z,1478886889.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:49.860Z,1478886889.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:50.037Z,1478886890.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:50.438Z,1478886890.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:50.658Z,1478886890.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:50.821Z,1478886890.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:51.224Z,1478886891.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:51.452Z,1478886891.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:51.633Z,1478886891.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:51.864Z,1478886891.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:52.020Z,1478886892.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:52.435Z,1478886892.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:52.660Z,1478886892.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:52.829Z,1478886892.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:53.217Z,1478886893.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:53.456Z,1478886893.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:53.669Z,1478886893.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:53.864Z,1478886893.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:54.021Z,1478886894.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:54.423Z,1478886894.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:54.660Z,1478886894.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:54.855Z,1478886894.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:55.216Z,1478886895.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:55.456Z,1478886895.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:55.658Z,1478886895.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:55.960Z,1478886895.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:56.056Z,1478886896.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:56.421Z,1478886896.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:56.760Z,1478886896.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:56.829Z,1478886896.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:57.221Z,1478886897.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:57.563Z,1478886897.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:57.633Z,1478886897.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:58.016Z,1478886898.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:58.308Z,1478886898.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:58.426Z,1478886898.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:58.825Z,1478886898.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:59.104Z,1478886899.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:54:59.224Z,1478886899.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:59.645Z,1478886899.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:54:59.900Z,1478886899.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:00.013Z,1478886900.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:00.412Z,1478886900.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:00.696Z,1478886900.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:00.815Z,1478886900.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:01.104Z,1478886901.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:01.255Z,1478886901.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:01.625Z,1478886901.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:01.836Z,1478886901.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:02.017Z,1478886902.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:02.420Z,1478886902.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:02.632Z,1478886902.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:02.820Z,1478886902.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:03.233Z,1478886903.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:03.428Z,1478886903.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:03.626Z,1478886903.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:03.836Z,1478886903.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:04.024Z,1478886904.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:04.425Z,1478886904.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:04.632Z,1478886904.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:04.825Z,1478886904.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:05.225Z,1478886905.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:05.428Z,1478886905.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:05.626Z,1478886905.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:05.836Z,1478886905.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:06.025Z,1478886906.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:06.424Z,1478886906.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:06.632Z,1478886906.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:06.830Z,1478886906.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:07.220Z,1478886907.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:07.428Z,1478886907.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:07.631Z,1478886907.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:07.836Z,1478886907.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:08.073Z,1478886908.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:08.453Z,1478886908.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:08.632Z,1478886908.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:08.828Z,1478886908.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:09.428Z,1478886909.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:09.940Z,1478886909.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:10.736Z,1478886910.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:11.532Z,1478886911.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:12.316Z,1478886912.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:12.330Z,1478886912.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:12.473Z,1478886912.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:12.853Z,1478886912.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:13.112Z,1478886913.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:13.250Z,1478886913.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:13.609Z,1478886913.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:13.908Z,1478886913.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:14.015Z,1478886914.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:14.316Z,1478886914.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:14.415Z,1478886914.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:14.813Z,1478886914.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:15.112Z,1478886915.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:15.216Z,1478886915.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:15.618Z,1478886915.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:15.808Z,1478886915.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:16.017Z,1478886916.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:16.448Z,1478886916.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:16.604Z,1478886916.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:16.805Z,1478886916.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:17.217Z,1478886917.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:17.400Z,1478886917.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:17.621Z,1478886917.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:17.808Z,1478886917.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:18.057Z,1478886918.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:18.415Z,1478886918.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:18.604Z,1478886918.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:18.817Z,1478886918.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:19.221Z,1478886919.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:19.400Z,1478886919.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:19.606Z,1478886919.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:19.808Z,1478886919.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:20.013Z,1478886920.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:20.432Z,1478886920.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:20.604Z,1478886920.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:20.821Z,1478886920.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:21.217Z,1478886921.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:21.401Z,1478886921.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:21.626Z,1478886921.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:21.812Z,1478886921.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:22.017Z,1478886922.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:22.421Z,1478886922.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:22.609Z,1478886922.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:22.805Z,1478886922.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:23.205Z,1478886923.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:23.404Z,1478886923.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:23.613Z,1478886923.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:23.896Z,1478886923.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:24.013Z,1478886924.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:24.404Z,1478886924.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:24.692Z,1478886924.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:24.809Z,1478886924.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:25.236Z,1478886925.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:25.488Z,1478886925.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:25.637Z,1478886925.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:26.012Z,1478886926.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:26.256Z,1478886926.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:26.414Z,1478886926.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:26.829Z,1478886926.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:27.052Z,1478886927.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:27.216Z,1478886927.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:27.622Z,1478886927.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:27.849Z,1478886927.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:28.016Z,1478886928.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:28.256Z,1478886928.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:28.437Z,1478886928.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:28.833Z,1478886928.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:29.053Z,1478886929.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:29.268Z,1478886929.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:29.628Z,1478886929.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:29.812Z,1478886929.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:30.014Z,1478886930.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:30.421Z,1478886930.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:30.608Z,1478886930.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:30.817Z,1478886930.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:31.224Z,1478886931.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:31.404Z,1478886931.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:31.616Z,1478886931.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:31.812Z,1478886931.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:32.018Z,1478886932.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:32.425Z,1478886932.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:32.609Z,1478886932.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:32.828Z,1478886932.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:33.243Z,1478886933.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:33.404Z,1478886933.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:33.614Z,1478886933.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:33.812Z,1478886933.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:34.023Z,1478886934.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:34.425Z,1478886934.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:34.608Z,1478886934.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:34.857Z,1478886934.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:35.228Z,1478886935.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:35.404Z,1478886935.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:35.604Z,1478886935.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:35.916Z,1478886935.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:36.008Z,1478886936.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:36.413Z,1478886936.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:36.712Z,1478886936.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:36.812Z,1478886936.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:37.227Z,1478886937.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:37.508Z,1478886937.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:37.614Z,1478886937.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:37.916Z,1478886937.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:38.013Z,1478886938.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:38.422Z,1478886938.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:38.712Z,1478886938.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:38.805Z,1478886938.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:39.212Z,1478886939.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:39.508Z,1478886939.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:39.610Z,1478886939.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:40.041Z,1478886940.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:40.232Z,1478886940.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:40.441Z,1478886940.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:40.796Z,1478886940.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:41.028Z,1478886941.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:41.170Z,1478886941.170 [NAL9602](INFO): SBD MO Status=2, MOMSN=353, MT Status=2, MTMSN=0
2016-11-11T17:55:41.170Z,1478886941.170 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T17:55:41.202Z,1478886941.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:41.669Z,1478886941.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:41.825Z,1478886941.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:42.013Z,1478886942.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:42.236Z,1478886942.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:42.444Z,1478886942.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:42.817Z,1478886942.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:43.032Z,1478886943.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:43.252Z,1478886943.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:43.612Z,1478886943.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:43.772Z,1478886943.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:44.016Z,1478886944.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:44.414Z,1478886944.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:44.568Z,1478886944.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:44.812Z,1478886944.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:45.217Z,1478886945.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:45.364Z,1478886945.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:45.623Z,1478886945.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:45.772Z,1478886945.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:46.068Z,1478886946.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:46.421Z,1478886946.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:46.568Z,1478886946.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:46.818Z,1478886946.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:47.216Z,1478886947.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:47.364Z,1478886947.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:47.621Z,1478886947.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:47.772Z,1478886947.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:48.013Z,1478886948.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:48.412Z,1478886948.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:48.568Z,1478886948.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:48.812Z,1478886948.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:49.213Z,1478886949.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:49.364Z,1478886949.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:49.612Z,1478886949.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:49.772Z,1478886949.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:50.058Z,1478886950.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:50.429Z,1478886950.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:50.568Z,1478886950.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:50.829Z,1478886950.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:51.229Z,1478886951.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:51.364Z,1478886951.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:51.649Z,1478886951.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:51.860Z,1478886951.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:52.009Z,1478886952.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:52.409Z,1478886952.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:52.656Z,1478886952.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:52.809Z,1478886952.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:53.213Z,1478886953.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:53.452Z,1478886953.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:53.608Z,1478886953.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:54.018Z,1478886954.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:54.212Z,1478886954.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:54.413Z,1478886954.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:54.829Z,1478886954.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:55.008Z,1478886955.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:55.289Z,1478886955.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:55.618Z,1478886955.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:55.805Z,1478886955.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:56.037Z,1478886956.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:56.216Z,1478886956.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:56.397Z,1478886956.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:56.830Z,1478886956.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:57.012Z,1478886957.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:57.231Z,1478886957.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:57.603Z,1478886957.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:57.756Z,1478886957.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:58.007Z,1478886958.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:58.413Z,1478886958.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:58.552Z,1478886958.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:58.814Z,1478886958.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:59.215Z,1478886959.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:59.348Z,1478886959.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:55:59.609Z,1478886959.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:55:59.756Z,1478886959.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:00.013Z,1478886960.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:00.409Z,1478886960.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:00.552Z,1478886960.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:00.817Z,1478886960.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:01.214Z,1478886961.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:01.348Z,1478886961.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:01.614Z,1478886961.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:01.756Z,1478886961.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:02.007Z,1478886962.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:02.409Z,1478886962.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:02.552Z,1478886962.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:02.859Z,1478886962.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:03.228Z,1478886963.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:03.348Z,1478886963.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:03.633Z,1478886963.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:03.756Z,1478886963.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:04.026Z,1478886964.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:04.420Z,1478886964.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:04.552Z,1478886964.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:04.815Z,1478886964.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:05.216Z,1478886965.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:05.350Z,1478886965.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:05.616Z,1478886965.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:05.832Z,1478886965.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:06.029Z,1478886966.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:06.435Z,1478886966.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:06.628Z,1478886966.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:06.843Z,1478886966.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:07.204Z,1478886967.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:07.426Z,1478886967.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:07.618Z,1478886967.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:08.025Z,1478886968.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:08.082Z,1478886968.082 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T17:56:08.204Z,1478886968.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:08.453Z,1478886968.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:08.829Z,1478886968.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:08.000Z,1478886969.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:09.798Z,1478886969.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:10.208Z,1478886970.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:11.004Z,1478886971.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:11.732Z,1478886971.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:12.301Z,1478886972.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:12.445Z,1478886972.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:12.528Z,1478886972.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:12.800Z,1478886972.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:13.243Z,1478886973.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:13.324Z,1478886973.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:13.608Z,1478886973.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:13.744Z,1478886973.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:14.030Z,1478886974.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:14.421Z,1478886974.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:14.541Z,1478886974.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:14.808Z,1478886974.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:15.208Z,1478886975.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:15.336Z,1478886975.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:15.597Z,1478886975.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:15.744Z,1478886975.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:16.001Z,1478886976.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:16.406Z,1478886976.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:16.540Z,1478886976.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:16.807Z,1478886976.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:17.204Z,1478886977.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:17.336Z,1478886977.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:17.605Z,1478886977.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:17.744Z,1478886977.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:18.004Z,1478886978.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:18.408Z,1478886978.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:18.540Z,1478886978.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:18.805Z,1478886978.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:19.223Z,1478886979.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:19.337Z,1478886979.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:19.671Z,1478886979.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:19.816Z,1478886979.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:20.018Z,1478886980.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:20.405Z,1478886980.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:20.612Z,1478886980.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:20.793Z,1478886980.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:21.195Z,1478886981.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:21.410Z,1478886981.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:21.601Z,1478886981.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:21.997Z,1478886981.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:22.172Z,1478886982.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:22.405Z,1478886982.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:22.805Z,1478886982.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:22.968Z,1478886982.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:23.207Z,1478886983.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:23.657Z,1478886983.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:23.764Z,1478886983.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:24.005Z,1478886984.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:24.184Z,1478886984.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:24.413Z,1478886984.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:24.821Z,1478886984.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:24.980Z,1478886984.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:25.294Z,1478886985.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:25.613Z,1478886985.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:25.744Z,1478886985.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:26.013Z,1478886986.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:26.454Z,1478886986.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:26.541Z,1478886986.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:26.834Z,1478886986.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:27.212Z,1478886987.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:27.336Z,1478886987.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:27.602Z,1478886987.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:27.744Z,1478886987.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:28.035Z,1478886988.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:28.409Z,1478886988.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:28.540Z,1478886988.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:28.839Z,1478886988.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:29.289Z,1478886989.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:29.336Z,1478886989.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:29.606Z,1478886989.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:29.744Z,1478886989.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:30.002Z,1478886990.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:30.409Z,1478886990.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:30.540Z,1478886990.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:30.802Z,1478886990.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:31.204Z,1478886991.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:31.336Z,1478886991.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:31.613Z,1478886991.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:31.744Z,1478886991.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:32.010Z,1478886992.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:32.414Z,1478886992.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:32.541Z,1478886992.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:32.805Z,1478886992.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:33.212Z,1478886993.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:33.341Z,1478886993.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:33.614Z,1478886993.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:33.794Z,1478886993.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:34.013Z,1478886994.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:34.411Z,1478886994.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:34.588Z,1478886994.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:34.816Z,1478886994.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:35.212Z,1478886995.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:35.384Z,1478886995.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:35.612Z,1478886995.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:36.009Z,1478886996.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:36.156Z,1478886996.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:36.452Z,1478886996.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:36.812Z,1478886996.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:36.952Z,1478886996.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:37.203Z,1478886997.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:37.613Z,1478886997.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:37.748Z,1478886997.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:38.005Z,1478886998.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:38.164Z,1478886998.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:38.400Z,1478886998.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:38.798Z,1478886998.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:38.960Z,1478886998.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:39.202Z,1478886999.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:39.621Z,1478886999.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:39.704Z,1478886999.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:40.012Z,1478887000.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:40.429Z,1478887000.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:40.501Z,1478887000.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:40.835Z,1478887000.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:41.294Z,1478887001.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:41.296Z,1478887001.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:41.621Z,1478887001.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:41.712Z,1478887001.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:42.081Z,1478887002.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:42.405Z,1478887002.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:42.508Z,1478887002.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:42.833Z,1478887002.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:43.277Z,1478887003.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:43.304Z,1478887003.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:43.562Z,1478887003.562 [NAL9602](INFO): SBD MO Status=0, MOMSN=353, MT Status=0, MTMSN=0
2016-11-11T17:56:43.562Z,1478887003.562 [NAL9602](INFO): No messages in MT queue
2016-11-11T17:56:43.618Z,1478887003.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:43.712Z,1478887003.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:44.004Z,1478887004.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:44.419Z,1478887004.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:44.508Z,1478887004.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:44.815Z,1478887004.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:45.279Z,1478887005.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:45.304Z,1478887005.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:45.609Z,1478887005.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:45.712Z,1478887005.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:46.016Z,1478887006.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:46.412Z,1478887006.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:46.508Z,1478887006.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:46.814Z,1478887006.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:47.218Z,1478887007.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:47.305Z,1478887007.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:47.619Z,1478887007.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:47.772Z,1478887007.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:48.016Z,1478887008.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:48.412Z,1478887008.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:48.568Z,1478887008.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:48.816Z,1478887008.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:49.212Z,1478887009.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:49.364Z,1478887009.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:49.614Z,1478887009.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:50.028Z,1478887010.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:50.160Z,1478887010.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:50.424Z,1478887010.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:50.817Z,1478887010.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:50.916Z,1478887010.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:51.209Z,1478887011.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:51.605Z,1478887011.605 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:51.605Z,1478887011.605 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 242
2016-11-11T17:56:51.605Z,1478887011.605 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:56:51.653Z,1478887011.653 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:56:51.712Z,1478887011.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:52.028Z,1478887012.028 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:52.028Z,1478887012.028 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 242
2016-11-11T17:56:52.028Z,1478887012.028 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:56:52.030Z,1478887012.030 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:52.030Z,1478887012.030 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 242
2016-11-11T17:56:52.030Z,1478887012.030 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:56:52.057Z,1478887012.057 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:56:52.057Z,1478887012.057 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 242
2016-11-11T17:56:52.058Z,1478887012.058 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:56:52.058Z,1478887012.058 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:56:52.144Z,1478887012.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:52.423Z,1478887012.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:56:52.423Z,1478887012.423 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:56:52.424Z,1478887012.424 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:56:52.442Z,1478887012.442 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:56:52.442Z,1478887012.442 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 242
2016-11-11T17:56:52.443Z,1478887012.443 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:56:52.443Z,1478887012.443 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 242
2016-11-11T17:56:52.836Z,1478887012.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:52.846Z,1478887012.846 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:56:52.846Z,1478887012.846 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:56:52.846Z,1478887012.846 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:56:52.847Z,1478887012.847 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:56:52.847Z,1478887012.847 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:56:52.848Z,1478887012.848 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:56:52.940Z,1478887012.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:53.297Z,1478887013.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:53.623Z,1478887013.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:53.720Z,1478887013.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:54.017Z,1478887014.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:54.397Z,1478887014.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:54.516Z,1478887014.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:54.820Z,1478887014.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:55.308Z,1478887015.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:55.316Z,1478887015.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:55.649Z,1478887015.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:55.724Z,1478887015.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:56.037Z,1478887016.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:56.422Z,1478887016.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:56.520Z,1478887016.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:56.841Z,1478887016.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:57.300Z,1478887017.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:57.316Z,1478887017.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:57.645Z,1478887017.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:57.724Z,1478887017.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:58.045Z,1478887018.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:58.430Z,1478887018.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:58.520Z,1478887018.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:58.873Z,1478887018.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:59.285Z,1478887019.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:59.316Z,1478887019.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:56:59.635Z,1478887019.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:56:59.724Z,1478887019.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:00.042Z,1478887020.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:00.432Z,1478887020.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:00.520Z,1478887020.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:00.846Z,1478887020.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:01.219Z,1478887021.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:01.317Z,1478887021.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:01.650Z,1478887021.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:01.788Z,1478887021.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:02.054Z,1478887022.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:02.429Z,1478887022.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:02.584Z,1478887022.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:02.826Z,1478887022.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:03.224Z,1478887023.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:03.380Z,1478887023.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:03.701Z,1478887023.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:04.054Z,1478887024.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:04.180Z,1478887024.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:04.401Z,1478887024.401 [PNI_TCM](ERROR): CRC does not match. Expected:0x48074 got:0x49148
2016-11-11T17:57:04.442Z,1478887024.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:04.808Z,1478887024.808 [PNI_TCM](ERROR): CRC does not match. Expected:0x21214 got:0x16962
2016-11-11T17:57:04.855Z,1478887024.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:04.976Z,1478887024.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:05.251Z,1478887025.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:05.669Z,1478887025.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:05.772Z,1478887025.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:06.017Z,1478887026.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:06.180Z,1478887026.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:06.422Z,1478887026.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:06.805Z,1478887026.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:06.976Z,1478887026.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:07.286Z,1478887027.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:07.626Z,1478887027.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:07.700Z,1478887027.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:08.021Z,1478887028.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:08.437Z,1478887028.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:08.496Z,1478887028.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:08.813Z,1478887028.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:09.292Z,1478887029.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:09.305Z,1478887029.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:09.700Z,1478887029.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:10.496Z,1478887030.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:11.292Z,1478887031.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:11.700Z,1478887031.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:12.496Z,1478887032.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:13.292Z,1478887033.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:13.700Z,1478887033.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:14.411Z,1478887034.411 [BPC1](ERROR): Failed to receive battery data
2016-11-11T17:57:14.411Z,1478887034.411 [BPC1] Communications Fault, FailCount= 1
2016-11-11T17:57:14.411Z,1478887034.411 [BPC1](ERROR): Communications Fault
2016-11-11T17:57:14.458Z,1478887034.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:14.496Z,1478887034.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:14.504Z,1478887034.504 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T17:57:14.600Z,1478887034.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:14.998Z,1478887034.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:15.293Z,1478887035.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:15.442Z,1478887035.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:15.489Z,1478887035.489 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:57:15.489Z,1478887035.490 [BPC1] No Fault, FailCount= 1
2016-11-11T17:57:15.824Z,1478887035.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:15.882Z,1478887035.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:16.214Z,1478887036.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:16.604Z,1478887036.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:16.620Z,1478887036.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:16.970Z,1478887036.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:17.389Z,1478887037.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:17.416Z,1478887037.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:17.797Z,1478887037.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:18.112Z,1478887038.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:18.214Z,1478887038.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:18.594Z,1478887038.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:18.908Z,1478887038.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:18.996Z,1478887038.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:19.379Z,1478887039.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:19.704Z,1478887039.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:19.789Z,1478887039.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:20.124Z,1478887040.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:20.197Z,1478887040.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:20.600Z,1478887040.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:20.921Z,1478887040.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:21.022Z,1478887041.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:21.414Z,1478887041.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:21.624Z,1478887041.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:21.778Z,1478887041.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:22.186Z,1478887042.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:22.420Z,1478887042.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:22.594Z,1478887042.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:23.030Z,1478887043.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:23.217Z,1478887043.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:23.401Z,1478887043.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:23.632Z,1478887043.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:23.813Z,1478887043.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:24.194Z,1478887044.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:24.428Z,1478887044.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:24.590Z,1478887044.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:24.998Z,1478887044.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:25.224Z,1478887045.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:25.388Z,1478887045.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:25.632Z,1478887045.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:25.796Z,1478887045.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:26.201Z,1478887046.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:26.428Z,1478887046.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:26.618Z,1478887046.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:27.011Z,1478887047.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:27.224Z,1478887047.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:27.390Z,1478887047.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:27.634Z,1478887047.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:27.808Z,1478887047.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:28.205Z,1478887048.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:28.428Z,1478887048.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:28.589Z,1478887048.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:28.998Z,1478887048.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:29.224Z,1478887049.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:29.410Z,1478887049.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:29.716Z,1478887049.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:29.821Z,1478887049.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:30.192Z,1478887050.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:30.512Z,1478887050.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:30.582Z,1478887050.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:30.994Z,1478887050.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:31.308Z,1478887051.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:31.400Z,1478887051.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:31.793Z,1478887051.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:32.104Z,1478887052.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:32.164Z,1478887052.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:32.516Z,1478887052.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:32.579Z,1478887052.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:32.983Z,1478887052.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:33.312Z,1478887053.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:33.385Z,1478887053.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:33.769Z,1478887053.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:34.108Z,1478887054.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:34.169Z,1478887054.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:34.568Z,1478887054.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:34.904Z,1478887054.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:34.966Z,1478887054.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:35.367Z,1478887055.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:35.700Z,1478887055.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:35.783Z,1478887055.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:36.183Z,1478887056.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:36.496Z,1478887056.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:36.575Z,1478887056.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:36.969Z,1478887056.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:37.292Z,1478887057.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:37.369Z,1478887057.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:37.777Z,1478887057.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:38.088Z,1478887058.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:38.185Z,1478887058.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:38.579Z,1478887058.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:38.884Z,1478887058.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:39.002Z,1478887059.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:39.389Z,1478887059.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:39.680Z,1478887059.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:39.773Z,1478887059.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:40.189Z,1478887060.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:40.476Z,1478887060.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:40.569Z,1478887060.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:40.970Z,1478887060.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:41.272Z,1478887061.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:41.386Z,1478887061.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:41.783Z,1478887061.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:42.068Z,1478887062.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:42.183Z,1478887062.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:42.645Z,1478887062.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:42.864Z,1478887062.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:42.977Z,1478887062.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:43.405Z,1478887063.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:43.660Z,1478887063.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:43.770Z,1478887063.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:44.195Z,1478887064.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:44.456Z,1478887064.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:44.575Z,1478887064.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:44.982Z,1478887064.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:45.252Z,1478887065.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:45.379Z,1478887065.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:45.773Z,1478887065.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:46.048Z,1478887066.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:46.173Z,1478887066.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:46.573Z,1478887066.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:46.844Z,1478887066.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:46.966Z,1478887066.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:47.369Z,1478887067.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:47.640Z,1478887067.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:47.775Z,1478887067.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:48.183Z,1478887068.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:48.436Z,1478887068.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:48.696Z,1478887068.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:48.969Z,1478887068.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:49.232Z,1478887069.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:49.373Z,1478887069.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:49.769Z,1478887069.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:50.028Z,1478887070.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:50.173Z,1478887070.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:50.585Z,1478887070.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:50.824Z,1478887070.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:50.989Z,1478887070.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:51.379Z,1478887071.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:51.620Z,1478887071.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:51.773Z,1478887071.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:52.168Z,1478887072.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:52.416Z,1478887072.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:52.573Z,1478887072.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:52.970Z,1478887072.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:53.212Z,1478887073.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:53.365Z,1478887073.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:53.779Z,1478887073.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:54.008Z,1478887074.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:54.183Z,1478887074.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:54.605Z,1478887074.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:54.804Z,1478887074.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:54.979Z,1478887074.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:55.316Z,1478887075.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:55.386Z,1478887075.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:55.724Z,1478887075.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:55.790Z,1478887075.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:56.132Z,1478887076.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:56.213Z,1478887076.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:56.540Z,1478887076.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:56.582Z,1478887076.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:56.980Z,1478887076.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:57.001Z,1478887077.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:57.388Z,1478887077.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:57.402Z,1478887077.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:57.777Z,1478887077.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:57.796Z,1478887077.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:58.193Z,1478887078.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:58.204Z,1478887078.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:58.577Z,1478887078.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:58.612Z,1478887078.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:59.002Z,1478887079.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:59.020Z,1478887079.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:59.377Z,1478887079.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:59.428Z,1478887079.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:57:59.785Z,1478887079.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:57:59.836Z,1478887079.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:00.189Z,1478887080.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:00.244Z,1478887080.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:00.589Z,1478887080.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:00.652Z,1478887080.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:00.973Z,1478887080.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:01.373Z,1478887081.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:01.448Z,1478887081.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:01.785Z,1478887081.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:02.020Z,1478887082.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:02.176Z,1478887082.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:02.585Z,1478887082.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:02.816Z,1478887082.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:02.987Z,1478887082.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:03.383Z,1478887083.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:03.544Z,1478887083.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:03.777Z,1478887083.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:04.181Z,1478887084.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:04.340Z,1478887084.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:04.574Z,1478887084.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:04.994Z,1478887084.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:05.136Z,1478887085.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:05.389Z,1478887085.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:05.544Z,1478887085.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:05.786Z,1478887085.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:06.195Z,1478887086.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:06.340Z,1478887086.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:06.593Z,1478887086.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:06.973Z,1478887086.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:07.136Z,1478887087.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:07.388Z,1478887087.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:07.544Z,1478887087.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:07.781Z,1478887087.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:08.187Z,1478887088.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:08.205Z,1478887088.205 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T17:53:07.9Z
2016-11-11T17:58:08.205Z,1478887088.205 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T17:58:08.205Z,1478887088.205 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T17:58:08.340Z,1478887088.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:08.595Z,1478887088.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:09.137Z,1478887089.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:09.552Z,1478887089.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:09.569Z,1478887089.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:09.705Z,1478887089.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:10.348Z,1478887090.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:11.145Z,1478887091.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:11.660Z,1478887091.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:12.456Z,1478887092.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:13.121Z,1478887093.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:13.176Z,1478887093.176 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0304.lzma
2016-11-11T17:58:13.238Z,1478887093.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:13.252Z,1478887093.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:13.636Z,1478887093.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:14.052Z,1478887094.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:14.134Z,1478887094.134 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0304.lzma.bak
2016-11-11T17:58:14.135Z,1478887094.135 [DataOverHttps](INFO): SBD MOMSN=4555632
2016-11-11T17:58:14.192Z,1478887094.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:14.848Z,1478887094.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:15.501Z,1478887095.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:15.644Z,1478887095.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:15.680Z,1478887095.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:16.052Z,1478887096.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:16.848Z,1478887096.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:17.520Z,1478887097.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:18.316Z,1478887098.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:19.112Z,1478887099.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:19.174Z,1478887099.174 [NAL9602](INFO): Powering down
2016-11-11T17:58:19.273Z,1478887099.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:19.405Z,1478887099.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:19.520Z,1478887099.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:19.800Z,1478887099.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:20.169Z,1478887100.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:20.316Z,1478887100.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:20.563Z,1478887100.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:20.973Z,1478887100.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:21.112Z,1478887101.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:21.376Z,1478887101.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:21.520Z,1478887101.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:21.777Z,1478887101.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:22.316Z,1478887102.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:23.112Z,1478887103.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:23.524Z,1478887103.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:24.320Z,1478887104.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:25.101Z,1478887105.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:25.116Z,1478887105.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:25.252Z,1478887105.252 [DataOverHttps](INFO): Sending 162 bytes from file Logs/20161111T044527/Express0305.lzma
2016-11-11T17:58:25.309Z,1478887105.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:25.636Z,1478887105.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:25.670Z,1478887105.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:26.432Z,1478887106.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:27.228Z,1478887107.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:28.024Z,1478887108.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:28.820Z,1478887108.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:29.616Z,1478887109.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:30.412Z,1478887110.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:31.208Z,1478887111.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:32.004Z,1478887112.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:32.800Z,1478887112.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:33.598Z,1478887113.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:34.392Z,1478887114.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:35.189Z,1478887115.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:35.984Z,1478887115.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:36.780Z,1478887116.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:37.576Z,1478887117.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:38.372Z,1478887118.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:39.168Z,1478887119.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:39.964Z,1478887119.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:40.760Z,1478887120.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:41.556Z,1478887121.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:42.352Z,1478887122.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:43.148Z,1478887123.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:43.944Z,1478887123.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:44.740Z,1478887124.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:45.538Z,1478887125.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:46.332Z,1478887126.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:46.749Z,1478887126.749 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0305.lzma.bak
2016-11-11T17:58:46.749Z,1478887126.749 [DataOverHttps](INFO): SBD MOMSN=4555634
2016-11-11T17:58:46.860Z,1478887126.860 [BPC1](ERROR): Failed to receive battery data
2016-11-11T17:58:46.860Z,1478887126.860 [BPC1] Communications Fault, FailCount= 1
2016-11-11T17:58:46.860Z,1478887126.860 [BPC1](ERROR): Communications Fault
2016-11-11T17:58:46.875Z,1478887126.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:46.946Z,1478887126.946 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T17:58:47.128Z,1478887127.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:47.536Z,1478887127.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:47.944Z,1478887127.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:48.352Z,1478887128.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:48.501Z,1478887128.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:48.526Z,1478887128.526 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T17:58:48.526Z,1478887128.526 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T17:58:48.526Z,1478887128.526 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T17:58:48.626Z,1478887128.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:48.760Z,1478887128.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:49.168Z,1478887129.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:49.576Z,1478887129.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:49.984Z,1478887129.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:50.392Z,1478887130.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:50.800Z,1478887130.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:51.208Z,1478887131.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:51.616Z,1478887131.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:52.024Z,1478887132.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:52.294Z,1478887132.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:52.314Z,1478887132.314 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T17:58:52.314Z,1478887132.314 [BPC1] No Fault, FailCount= 1
2016-11-11T17:58:52.432Z,1478887132.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:52.509Z,1478887132.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:52.767Z,1478887132.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:53.212Z,1478887133.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:53.236Z,1478887133.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:53.566Z,1478887133.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:53.644Z,1478887133.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:53.967Z,1478887133.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:54.371Z,1478887134.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:54.440Z,1478887134.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:54.773Z,1478887134.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:55.173Z,1478887135.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:55.236Z,1478887135.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:55.579Z,1478887135.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:55.912Z,1478887135.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:55.977Z,1478887135.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:56.375Z,1478887136.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:56.710Z,1478887136.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:56.782Z,1478887136.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:57.172Z,1478887137.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:57.504Z,1478887137.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:57.592Z,1478887137.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:57.912Z,1478887137.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:57.985Z,1478887137.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:58.365Z,1478887138.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:58.708Z,1478887138.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:58.794Z,1478887138.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:59.166Z,1478887139.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:59.440Z,1478887139.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:58:59.566Z,1478887139.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:58:59.970Z,1478887139.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:00.236Z,1478887140.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:00.366Z,1478887140.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:00.777Z,1478887140.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:01.032Z,1478887141.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:01.177Z,1478887141.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:01.440Z,1478887141.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:01.577Z,1478887141.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:01.970Z,1478887141.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:02.236Z,1478887142.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:02.376Z,1478887142.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:02.776Z,1478887142.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:03.032Z,1478887143.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:03.176Z,1478887143.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:03.440Z,1478887143.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:03.609Z,1478887143.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:03.987Z,1478887143.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:04.236Z,1478887144.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:04.376Z,1478887144.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:04.814Z,1478887144.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:05.032Z,1478887145.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:05.188Z,1478887145.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:05.440Z,1478887145.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:05.609Z,1478887145.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:05.973Z,1478887145.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:06.236Z,1478887146.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:06.405Z,1478887146.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:06.803Z,1478887146.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:07.032Z,1478887147.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:07.206Z,1478887147.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:07.548Z,1478887147.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:07.575Z,1478887147.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:07.967Z,1478887147.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:08.344Z,1478887148.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:08.381Z,1478887148.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:08.767Z,1478887148.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:09.141Z,1478887149.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:09.172Z,1478887149.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:09.568Z,1478887149.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:09.888Z,1478887149.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:09.978Z,1478887149.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:10.370Z,1478887150.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:10.684Z,1478887150.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:10.773Z,1478887150.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:11.173Z,1478887151.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:11.481Z,1478887151.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:11.579Z,1478887151.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:11.888Z,1478887151.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:11.969Z,1478887151.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:12.369Z,1478887152.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:12.684Z,1478887152.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:12.770Z,1478887152.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:13.173Z,1478887153.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:13.416Z,1478887153.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:13.570Z,1478887153.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:13.970Z,1478887153.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:14.212Z,1478887154.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:14.373Z,1478887154.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:14.773Z,1478887154.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:15.008Z,1478887155.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:15.173Z,1478887155.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:15.416Z,1478887155.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:15.573Z,1478887155.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:15.976Z,1478887155.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:16.212Z,1478887156.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:16.376Z,1478887156.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:16.773Z,1478887156.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:17.008Z,1478887157.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:17.182Z,1478887157.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:17.416Z,1478887157.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:17.597Z,1478887157.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:17.977Z,1478887157.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:18.212Z,1478887158.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:18.380Z,1478887158.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:18.774Z,1478887158.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:19.010Z,1478887159.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:19.201Z,1478887159.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:19.420Z,1478887159.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:19.581Z,1478887159.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:19.993Z,1478887159.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:20.216Z,1478887160.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:20.382Z,1478887160.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:20.790Z,1478887160.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:21.014Z,1478887161.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:21.228Z,1478887161.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:21.508Z,1478887161.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:21.581Z,1478887161.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:21.980Z,1478887161.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:22.304Z,1478887162.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:22.377Z,1478887162.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:22.787Z,1478887162.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:23.100Z,1478887163.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:23.185Z,1478887163.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:23.581Z,1478887163.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:23.869Z,1478887163.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:23.981Z,1478887163.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:24.361Z,1478887164.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:24.664Z,1478887164.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:24.769Z,1478887164.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:25.172Z,1478887165.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:25.460Z,1478887165.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:25.563Z,1478887165.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:25.868Z,1478887165.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:25.967Z,1478887165.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:26.370Z,1478887166.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:26.664Z,1478887166.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:26.765Z,1478887166.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:27.169Z,1478887167.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:27.392Z,1478887167.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:27.569Z,1478887167.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:27.965Z,1478887167.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:28.188Z,1478887168.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:28.369Z,1478887168.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:28.760Z,1478887168.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:28.984Z,1478887168.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:29.162Z,1478887169.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:29.568Z,1478887169.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:29.780Z,1478887169.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:29.969Z,1478887169.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:30.361Z,1478887170.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:30.576Z,1478887170.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:30.769Z,1478887170.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:31.194Z,1478887171.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:31.372Z,1478887171.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:31.589Z,1478887171.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:31.969Z,1478887171.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:32.168Z,1478887172.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:32.368Z,1478887172.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:32.769Z,1478887172.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:32.964Z,1478887172.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:33.185Z,1478887173.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:33.564Z,1478887173.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:33.760Z,1478887173.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:33.971Z,1478887173.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:34.397Z,1478887174.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:34.556Z,1478887174.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:34.764Z,1478887174.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:35.193Z,1478887175.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:35.352Z,1478887175.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:35.598Z,1478887175.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:35.965Z,1478887175.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:36.148Z,1478887176.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:36.365Z,1478887176.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:36.762Z,1478887176.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:36.944Z,1478887176.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:37.166Z,1478887177.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:37.566Z,1478887177.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:37.740Z,1478887177.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:37.964Z,1478887177.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:38.364Z,1478887178.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:38.536Z,1478887178.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:38.764Z,1478887178.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:39.174Z,1478887179.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:39.332Z,1478887179.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:39.564Z,1478887179.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:39.998Z,1478887179.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:40.128Z,1478887180.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:40.369Z,1478887180.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:40.769Z,1478887180.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:40.924Z,1478887180.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:41.185Z,1478887181.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:41.564Z,1478887181.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:41.720Z,1478887181.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:41.965Z,1478887181.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:42.364Z,1478887182.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:42.516Z,1478887182.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:42.782Z,1478887182.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:43.169Z,1478887183.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:43.312Z,1478887183.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:43.597Z,1478887183.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:43.964Z,1478887183.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:44.108Z,1478887184.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:44.364Z,1478887184.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:44.765Z,1478887184.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:44.905Z,1478887184.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:45.164Z,1478887185.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:45.565Z,1478887185.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:45.700Z,1478887185.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:45.964Z,1478887185.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:46.360Z,1478887186.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:46.496Z,1478887186.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:46.769Z,1478887186.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:47.160Z,1478887187.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:47.292Z,1478887187.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:47.564Z,1478887187.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:48.022Z,1478887188.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:48.088Z,1478887188.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:48.373Z,1478887188.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:48.765Z,1478887188.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:48.884Z,1478887188.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:49.189Z,1478887189.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:49.292Z,1478887189.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:49.700Z,1478887189.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:50.108Z,1478887190.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:50.516Z,1478887190.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:50.924Z,1478887190.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:51.332Z,1478887191.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:51.740Z,1478887191.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:52.148Z,1478887192.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:52.556Z,1478887192.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:52.964Z,1478887192.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:53.372Z,1478887193.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:53.784Z,1478887193.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:54.192Z,1478887194.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:54.988Z,1478887194.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:55.396Z,1478887195.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:55.608Z,1478887195.608 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:55.608Z,1478887195.608 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 243
2016-11-11T17:59:55.608Z,1478887195.608 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T17:59:55.614Z,1478887195.615 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:55.615Z,1478887195.615 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 243
2016-11-11T17:59:55.615Z,1478887195.615 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T17:59:55.617Z,1478887195.617 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:55.617Z,1478887195.617 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 243
2016-11-11T17:59:55.617Z,1478887195.617 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T17:59:55.671Z,1478887195.671 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T17:59:55.671Z,1478887195.671 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T17:59:55.672Z,1478887195.672 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T17:59:55.798Z,1478887195.798 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T17:59:55.798Z,1478887195.798 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 243
2016-11-11T17:59:55.811Z,1478887195.811 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T17:59:55.811Z,1478887195.811 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 243
2016-11-11T17:59:55.812Z,1478887195.812 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T17:59:55.812Z,1478887195.812 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 243
2016-11-11T17:59:56.172Z,1478887196.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T17:59:56.172Z,1478887196.172 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:59:56.173Z,1478887196.173 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:59:56.182Z,1478887196.182 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T17:59:56.182Z,1478887196.182 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:59:56.183Z,1478887196.182 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:59:56.187Z,1478887196.187 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T17:59:56.188Z,1478887196.188 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T17:59:56.188Z,1478887196.188 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T17:59:56.192Z,1478887196.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:56.533Z,1478887196.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:56.978Z,1478887196.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:56.988Z,1478887196.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:57.343Z,1478887197.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:57.400Z,1478887197.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:57.795Z,1478887197.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:58.138Z,1478887198.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:58.196Z,1478887198.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:58.539Z,1478887198.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:58.961Z,1478887198.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:58.992Z,1478887198.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:59.318Z,1478887199.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T17:59:59.416Z,1478887199.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T17:59:59.747Z,1478887199.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:00.111Z,1478887200.111 [PNI_TCM](ERROR): CRC does not match. Expected:0x50419 got:0x32768
2016-11-11T18:00:00.153Z,1478887200.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:00.212Z,1478887200.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:00.521Z,1478887200.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:00.967Z,1478887200.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:01.008Z,1478887201.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:01.349Z,1478887201.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:01.416Z,1478887201.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:01.729Z,1478887201.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:02.126Z,1478887202.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:02.212Z,1478887202.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:02.528Z,1478887202.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:02.929Z,1478887202.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:03.009Z,1478887203.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:03.335Z,1478887203.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:03.452Z,1478887203.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:03.732Z,1478887203.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:04.136Z,1478887204.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:04.248Z,1478887204.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:04.536Z,1478887204.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:04.937Z,1478887204.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:05.045Z,1478887205.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:05.389Z,1478887205.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:05.725Z,1478887205.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:05.820Z,1478887205.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:06.137Z,1478887206.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:06.528Z,1478887206.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:06.616Z,1478887206.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:06.926Z,1478887206.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:07.399Z,1478887207.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:07.412Z,1478887207.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:07.734Z,1478887207.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:07.820Z,1478887207.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:08.182Z,1478887208.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:08.541Z,1478887208.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:08.616Z,1478887208.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:09.014Z,1478887209.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:09.341Z,1478887209.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:09.408Z,1478887209.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:09.767Z,1478887209.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:10.173Z,1478887210.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:10.204Z,1478887210.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:10.526Z,1478887210.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:10.964Z,1478887210.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:10.000Z,1478887211.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:11.338Z,1478887211.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:11.408Z,1478887211.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:11.743Z,1478887211.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:12.145Z,1478887212.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:12.204Z,1478887212.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:12.542Z,1478887212.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:12.000Z,1478887213.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:13.013Z,1478887213.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:13.325Z,1478887213.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:13.408Z,1478887213.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:13.731Z,1478887213.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:14.136Z,1478887214.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:14.204Z,1478887214.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:14.577Z,1478887214.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:14.977Z,1478887214.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:14.000Z,1478887215.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:15.337Z,1478887215.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:15.408Z,1478887215.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:15.735Z,1478887215.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:16.132Z,1478887216.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:16.204Z,1478887216.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:16.537Z,1478887216.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:17.001Z,1478887217.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:17.029Z,1478887217.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:17.322Z,1478887217.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:17.472Z,1478887217.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:17.721Z,1478887217.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:18.127Z,1478887218.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:18.268Z,1478887218.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:18.526Z,1478887218.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:18.926Z,1478887218.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:19.064Z,1478887219.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:19.382Z,1478887219.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:19.726Z,1478887219.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:19.804Z,1478887219.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:20.129Z,1478887220.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:20.538Z,1478887220.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:20.600Z,1478887220.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:20.933Z,1478887220.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:21.387Z,1478887221.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:21.396Z,1478887221.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:21.737Z,1478887221.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:21.804Z,1478887221.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:22.157Z,1478887222.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:22.530Z,1478887222.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:22.600Z,1478887222.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:22.962Z,1478887222.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:23.326Z,1478887223.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:23.352Z,1478887223.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:23.726Z,1478887223.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:24.129Z,1478887224.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:24.148Z,1478887224.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:24.525Z,1478887224.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:24.940Z,1478887224.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:24.944Z,1478887224.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:25.322Z,1478887225.322 [BPC1](ERROR): Failed to receive battery data
2016-11-11T18:00:25.322Z,1478887225.322 [BPC1] Communications Fault, FailCount= 1
2016-11-11T18:00:25.322Z,1478887225.322 [BPC1](ERROR): Communications Fault
2016-11-11T18:00:25.337Z,1478887225.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:25.357Z,1478887225.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:25.384Z,1478887225.385 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T18:00:25.753Z,1478887225.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:26.144Z,1478887226.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:26.152Z,1478887226.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:26.537Z,1478887226.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:26.557Z,1478887226.556 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:00:26.557Z,1478887226.557 [BPC1] No Fault, FailCount= 1
2016-11-11T18:00:26.948Z,1478887226.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:27.023Z,1478887227.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:27.356Z,1478887227.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:27.364Z,1478887227.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:27.740Z,1478887227.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:28.118Z,1478887228.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:28.152Z,1478887228.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:28.541Z,1478887228.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:28.948Z,1478887228.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:28.961Z,1478887228.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:29.356Z,1478887229.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:29.376Z,1478887229.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:29.731Z,1478887229.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:30.132Z,1478887230.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:30.152Z,1478887230.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:30.536Z,1478887230.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:30.948Z,1478887230.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:31.025Z,1478887231.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:31.349Z,1478887231.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:31.448Z,1478887231.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:31.735Z,1478887231.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:32.141Z,1478887232.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:32.244Z,1478887232.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:32.557Z,1478887232.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:32.924Z,1478887232.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:33.040Z,1478887233.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:33.386Z,1478887233.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:33.737Z,1478887233.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:33.788Z,1478887233.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:34.153Z,1478887234.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:34.542Z,1478887234.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:34.584Z,1478887234.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:34.937Z,1478887234.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:35.372Z,1478887235.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:35.380Z,1478887235.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:35.740Z,1478887235.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:35.808Z,1478887235.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:36.144Z,1478887236.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:36.518Z,1478887236.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:36.604Z,1478887236.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:36.953Z,1478887236.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:37.276Z,1478887237.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:37.329Z,1478887237.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:37.726Z,1478887237.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:38.072Z,1478887238.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:38.126Z,1478887238.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:38.529Z,1478887238.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:38.869Z,1478887238.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:38.940Z,1478887238.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:39.276Z,1478887239.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:39.337Z,1478887239.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:39.736Z,1478887239.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:40.072Z,1478887240.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:40.138Z,1478887240.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:40.535Z,1478887240.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:40.868Z,1478887240.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:40.947Z,1478887240.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:41.276Z,1478887241.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:41.334Z,1478887241.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:41.746Z,1478887241.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:42.072Z,1478887242.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:42.157Z,1478887242.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:42.548Z,1478887242.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:42.868Z,1478887242.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:42.922Z,1478887242.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:43.320Z,1478887243.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:43.326Z,1478887243.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:43.733Z,1478887243.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:44.116Z,1478887244.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:44.137Z,1478887244.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:44.533Z,1478887244.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:44.913Z,1478887244.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:45.025Z,1478887245.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:45.341Z,1478887245.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:45.404Z,1478887245.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:45.745Z,1478887245.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:46.153Z,1478887246.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:46.200Z,1478887246.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:46.553Z,1478887246.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:46.946Z,1478887246.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:46.996Z,1478887246.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:47.354Z,1478887247.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:47.773Z,1478887247.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:47.792Z,1478887247.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:48.146Z,1478887248.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:48.200Z,1478887248.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:48.526Z,1478887248.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:48.954Z,1478887248.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:48.996Z,1478887248.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:49.373Z,1478887249.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:49.772Z,1478887249.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:50.568Z,1478887250.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:51.276Z,1478887251.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:52.072Z,1478887252.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:52.701Z,1478887252.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:52.868Z,1478887252.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:52.902Z,1478887252.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:53.235Z,1478887253.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:53.300Z,1478887253.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:53.613Z,1478887253.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:54.040Z,1478887254.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:54.096Z,1478887254.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:54.419Z,1478887254.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:54.863Z,1478887254.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:54.892Z,1478887254.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:55.221Z,1478887255.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:55.304Z,1478887255.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:55.614Z,1478887255.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:56.016Z,1478887256.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:56.100Z,1478887256.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:56.423Z,1478887256.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:56.870Z,1478887256.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:56.904Z,1478887256.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:57.233Z,1478887257.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:57.312Z,1478887257.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:57.625Z,1478887257.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:58.020Z,1478887258.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:58.108Z,1478887258.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:58.406Z,1478887258.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:58.829Z,1478887258.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:58.905Z,1478887258.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:59.226Z,1478887259.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:00:59.384Z,1478887259.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:00:59.616Z,1478887259.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:00.033Z,1478887260.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:00.180Z,1478887260.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:00.422Z,1478887260.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:00.825Z,1478887260.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:00.976Z,1478887260.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:01.223Z,1478887261.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:01.625Z,1478887261.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:01.736Z,1478887261.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:02.029Z,1478887262.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:02.425Z,1478887262.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:02.532Z,1478887262.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:02.807Z,1478887262.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:03.214Z,1478887263.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:03.328Z,1478887263.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:03.634Z,1478887263.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:03.740Z,1478887263.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:04.025Z,1478887264.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:04.449Z,1478887264.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:04.536Z,1478887264.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:04.854Z,1478887264.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:05.229Z,1478887265.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:05.280Z,1478887265.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:05.607Z,1478887265.606 [PNI_TCM](ERROR): CRC does not match. Expected:0x25427 got:0x19622
2016-11-11T18:01:05.661Z,1478887265.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:06.029Z,1478887266.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:06.076Z,1478887266.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:06.454Z,1478887266.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:06.872Z,1478887266.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:06.905Z,1478887266.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:07.221Z,1478887267.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:07.284Z,1478887267.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:07.624Z,1478887267.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:08.024Z,1478887268.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:08.080Z,1478887268.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:08.433Z,1478887268.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:08.847Z,1478887268.847 [PNI_TCM](ERROR): CRC does not match. Expected:0x10410 got:0x4367
2016-11-11T18:01:08.866Z,1478887268.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:08.876Z,1478887268.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:09.224Z,1478887269.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:09.284Z,1478887269.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:09.616Z,1478887269.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:10.018Z,1478887270.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:10.080Z,1478887270.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:10.409Z,1478887270.409 [PNI_TCM](ERROR): CRC does not match. Expected:0x58931 got:0x6335
2016-11-11T18:01:10.437Z,1478887270.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:10.872Z,1478887270.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:10.876Z,1478887270.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:11.224Z,1478887271.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:11.284Z,1478887271.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:11.629Z,1478887271.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:11.997Z,1478887271.997 [PNI_TCM](ERROR): CRC does not match. Expected:0x25598 got:0x1857
2016-11-11T18:01:12.023Z,1478887272.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:12.080Z,1478887272.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:12.424Z,1478887272.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:12.823Z,1478887272.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:12.877Z,1478887272.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:13.232Z,1478887273.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:13.344Z,1478887273.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:13.628Z,1478887273.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:14.025Z,1478887274.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:14.140Z,1478887274.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:14.409Z,1478887274.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:14.832Z,1478887274.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:14.936Z,1478887274.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:15.197Z,1478887275.197 [PNI_TCM](ERROR): CRC does not match. Expected:0x42734 got:0x133
2016-11-11T18:01:15.333Z,1478887275.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:15.617Z,1478887275.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:15.724Z,1478887275.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:16.021Z,1478887276.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:16.418Z,1478887276.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:16.520Z,1478887276.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:16.811Z,1478887276.811 [BPC1](ERROR): Failed to parse message.
2016-11-11T18:01:16.811Z,1478887276.811 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T18:01:16.812Z,1478887276.812 [BPC1] Data Fault, FailCount= 1
2016-11-11T18:01:16.812Z,1478887276.812 [BPC1](ERROR): Data Fault
2016-11-11T18:01:16.836Z,1478887276.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:16.899Z,1478887276.899 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T18:01:17.256Z,1478887277.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:17.316Z,1478887277.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:17.616Z,1478887277.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:17.724Z,1478887277.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:18.019Z,1478887278.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:18.059Z,1478887278.059 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:01:18.059Z,1478887278.059 [BPC1] No Fault, FailCount= 1
2016-11-11T18:01:18.462Z,1478887278.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:18.520Z,1478887278.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:18.872Z,1478887278.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:19.230Z,1478887279.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:19.284Z,1478887279.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:19.628Z,1478887279.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:20.006Z,1478887280.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:20.080Z,1478887280.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:20.407Z,1478887280.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:20.833Z,1478887280.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:20.876Z,1478887280.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:21.222Z,1478887281.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:21.284Z,1478887281.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:21.623Z,1478887281.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:22.024Z,1478887282.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:22.080Z,1478887282.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:22.425Z,1478887282.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:22.834Z,1478887282.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:22.876Z,1478887282.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:23.239Z,1478887283.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:23.284Z,1478887283.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:23.629Z,1478887283.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:24.018Z,1478887284.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:24.080Z,1478887284.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:24.435Z,1478887284.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:24.834Z,1478887284.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:24.876Z,1478887284.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:25.233Z,1478887285.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:25.284Z,1478887285.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:25.611Z,1478887285.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:26.017Z,1478887286.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:26.080Z,1478887286.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:26.411Z,1478887286.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:26.821Z,1478887286.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:26.877Z,1478887286.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:27.221Z,1478887287.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:27.328Z,1478887287.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:27.625Z,1478887287.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:28.017Z,1478887288.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:28.125Z,1478887288.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:28.412Z,1478887288.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:28.819Z,1478887288.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:28.920Z,1478887288.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:29.264Z,1478887289.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:29.658Z,1478887289.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:29.712Z,1478887289.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:30.021Z,1478887290.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:30.414Z,1478887290.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:30.508Z,1478887290.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:30.861Z,1478887290.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:31.278Z,1478887291.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:31.304Z,1478887291.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:31.611Z,1478887291.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:31.712Z,1478887291.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:32.049Z,1478887292.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:32.421Z,1478887292.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:32.508Z,1478887292.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:32.865Z,1478887292.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:33.211Z,1478887293.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:33.244Z,1478887293.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:33.650Z,1478887293.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:34.021Z,1478887294.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:34.040Z,1478887294.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:34.412Z,1478887294.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:34.831Z,1478887294.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:34.836Z,1478887294.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:35.224Z,1478887295.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:35.244Z,1478887295.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:35.610Z,1478887295.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:36.017Z,1478887296.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:36.040Z,1478887296.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:36.411Z,1478887296.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:36.828Z,1478887296.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:36.844Z,1478887296.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:37.212Z,1478887297.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:37.252Z,1478887297.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:37.624Z,1478887297.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:38.024Z,1478887298.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:38.048Z,1478887298.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:38.430Z,1478887298.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:38.841Z,1478887298.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:38.844Z,1478887298.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:39.209Z,1478887299.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:39.252Z,1478887299.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:39.613Z,1478887299.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:40.013Z,1478887300.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:40.048Z,1478887300.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:40.408Z,1478887300.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:40.845Z,1478887300.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:40.854Z,1478887300.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:41.233Z,1478887301.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:41.336Z,1478887301.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:41.616Z,1478887301.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:42.021Z,1478887302.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:42.132Z,1478887302.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:42.413Z,1478887302.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:42.811Z,1478887302.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:42.928Z,1478887302.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:43.278Z,1478887303.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:43.615Z,1478887303.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:43.676Z,1478887303.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:44.058Z,1478887304.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:44.420Z,1478887304.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:44.472Z,1478887304.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:44.817Z,1478887304.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:45.268Z,1478887305.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:45.325Z,1478887305.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:45.625Z,1478887305.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:45.676Z,1478887305.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:46.034Z,1478887306.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:46.445Z,1478887306.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:46.472Z,1478887306.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:46.838Z,1478887306.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:47.184Z,1478887307.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:47.241Z,1478887307.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:47.645Z,1478887307.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:47.980Z,1478887307.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:48.012Z,1478887308.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:48.415Z,1478887308.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:48.779Z,1478887308.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:48.833Z,1478887308.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:49.196Z,1478887309.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:49.212Z,1478887309.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:49.617Z,1478887309.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:49.992Z,1478887309.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:50.789Z,1478887310.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:51.200Z,1478887311.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:51.996Z,1478887311.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:52.792Z,1478887312.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:53.200Z,1478887313.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:53.252Z,1478887313.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:53.373Z,1478887313.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:53.749Z,1478887313.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:53.996Z,1478887313.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:54.149Z,1478887314.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:54.549Z,1478887314.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:54.793Z,1478887314.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:54.953Z,1478887314.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:55.268Z,1478887315.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:55.349Z,1478887315.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:55.753Z,1478887315.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:56.064Z,1478887316.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:56.157Z,1478887316.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:56.578Z,1478887316.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:56.860Z,1478887316.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:56.969Z,1478887316.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:57.372Z,1478887317.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:57.632Z,1478887317.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:57.758Z,1478887317.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:58.172Z,1478887318.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:58.428Z,1478887318.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:58.610Z,1478887318.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:58.962Z,1478887318.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:59.224Z,1478887319.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:59.361Z,1478887319.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:01:59.648Z,1478887319.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:01:59.826Z,1478887319.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:00.166Z,1478887320.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:00.445Z,1478887320.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:00.581Z,1478887320.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:00.985Z,1478887320.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:01.172Z,1478887321.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:01.363Z,1478887321.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:01.786Z,1478887321.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:01.968Z,1478887321.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:02.179Z,1478887322.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:02.564Z,1478887322.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:02.764Z,1478887322.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:02.950Z,1478887322.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:03.172Z,1478887323.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:03.375Z,1478887323.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:03.762Z,1478887323.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:03.968Z,1478887323.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:04.161Z,1478887324.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:04.550Z,1478887324.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:04.764Z,1478887324.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:04.961Z,1478887324.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:05.172Z,1478887325.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:05.370Z,1478887325.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:05.768Z,1478887325.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:05.969Z,1478887325.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:06.161Z,1478887326.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:06.556Z,1478887326.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:06.764Z,1478887326.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:06.982Z,1478887326.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:07.172Z,1478887327.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:07.369Z,1478887327.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:07.783Z,1478887327.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:07.968Z,1478887327.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:08.174Z,1478887328.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:08.570Z,1478887328.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:08.764Z,1478887328.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:08.956Z,1478887328.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:09.240Z,1478887329.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:09.382Z,1478887329.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:09.800Z,1478887329.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:10.036Z,1478887330.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:10.185Z,1478887330.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:10.580Z,1478887330.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:10.832Z,1478887330.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:10.974Z,1478887330.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:11.365Z,1478887331.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:11.620Z,1478887331.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:11.769Z,1478887331.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:12.147Z,1478887332.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:12.416Z,1478887332.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:12.546Z,1478887332.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:13.004Z,1478887333.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:13.212Z,1478887333.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:13.350Z,1478887333.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:13.621Z,1478887333.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:13.758Z,1478887333.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:14.203Z,1478887334.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:14.416Z,1478887334.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:14.598Z,1478887334.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:15.009Z,1478887335.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:15.180Z,1478887335.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:15.366Z,1478887335.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:15.813Z,1478887335.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:15.976Z,1478887335.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:16.181Z,1478887336.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:16.572Z,1478887336.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:16.772Z,1478887336.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:16.958Z,1478887336.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:17.180Z,1478887337.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:17.353Z,1478887337.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:17.765Z,1478887337.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:17.976Z,1478887337.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:18.166Z,1478887338.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:18.565Z,1478887338.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:18.772Z,1478887338.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:18.959Z,1478887338.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:19.180Z,1478887339.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:19.354Z,1478887339.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:19.757Z,1478887339.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:19.976Z,1478887339.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:20.185Z,1478887340.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:20.562Z,1478887340.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:20.772Z,1478887340.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:21.028Z,1478887341.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:21.180Z,1478887341.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:21.357Z,1478887341.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:21.756Z,1478887341.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:21.976Z,1478887341.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:22.169Z,1478887342.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:22.573Z,1478887342.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:22.773Z,1478887342.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:22.970Z,1478887342.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:23.236Z,1478887343.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:23.350Z,1478887343.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:23.758Z,1478887343.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:24.032Z,1478887344.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:24.168Z,1478887344.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:24.574Z,1478887344.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:24.828Z,1478887344.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:24.951Z,1478887344.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:25.382Z,1478887345.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:25.592Z,1478887345.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:25.761Z,1478887345.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:26.174Z,1478887346.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:26.388Z,1478887346.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:26.575Z,1478887346.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:26.998Z,1478887346.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:27.184Z,1478887347.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:27.369Z,1478887347.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:27.601Z,1478887347.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:27.782Z,1478887347.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:28.225Z,1478887348.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:28.396Z,1478887348.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:28.547Z,1478887348.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:28.960Z,1478887348.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:29.104Z,1478887349.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:29.383Z,1478887349.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:29.759Z,1478887349.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:29.900Z,1478887349.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:30.196Z,1478887350.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:30.593Z,1478887350.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:30.696Z,1478887350.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:30.947Z,1478887350.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:31.124Z,1478887351.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:31.346Z,1478887351.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:31.746Z,1478887351.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:31.920Z,1478887351.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:32.147Z,1478887352.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:32.546Z,1478887352.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:32.716Z,1478887352.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:32.956Z,1478887352.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:33.128Z,1478887353.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:33.354Z,1478887353.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:33.747Z,1478887353.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:33.924Z,1478887353.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:34.146Z,1478887354.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:34.553Z,1478887354.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:34.720Z,1478887354.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:34.940Z,1478887354.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:35.128Z,1478887355.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:35.370Z,1478887355.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:35.740Z,1478887355.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:35.924Z,1478887355.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:36.145Z,1478887356.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:36.549Z,1478887356.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:36.720Z,1478887356.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:36.951Z,1478887356.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:37.192Z,1478887357.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:37.343Z,1478887357.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:37.752Z,1478887357.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:37.988Z,1478887357.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:38.153Z,1478887358.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:38.547Z,1478887358.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:38.784Z,1478887358.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:38.961Z,1478887358.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:39.395Z,1478887359.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:39.552Z,1478887359.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:39.750Z,1478887359.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:40.148Z,1478887360.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:40.348Z,1478887360.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:40.555Z,1478887360.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:40.957Z,1478887360.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:41.144Z,1478887361.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:41.374Z,1478887361.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:41.576Z,1478887361.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:41.757Z,1478887361.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:42.156Z,1478887362.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:42.372Z,1478887362.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:42.581Z,1478887362.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:42.975Z,1478887362.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:43.120Z,1478887363.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:43.373Z,1478887363.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:43.760Z,1478887363.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:43.916Z,1478887363.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:44.170Z,1478887364.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:44.552Z,1478887364.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:44.712Z,1478887364.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:44.981Z,1478887364.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:45.120Z,1478887365.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:45.343Z,1478887365.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:45.743Z,1478887365.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:45.916Z,1478887365.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:46.152Z,1478887366.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:46.557Z,1478887366.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:46.712Z,1478887366.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:46.953Z,1478887366.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:47.120Z,1478887367.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:47.348Z,1478887367.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:47.758Z,1478887367.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:47.916Z,1478887367.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:48.147Z,1478887368.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:48.556Z,1478887368.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:48.712Z,1478887368.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:48.984Z,1478887368.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:49.120Z,1478887369.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:49.365Z,1478887369.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:49.745Z,1478887369.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:49.916Z,1478887369.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:50.713Z,1478887370.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:51.184Z,1478887371.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:51.980Z,1478887371.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:52.776Z,1478887372.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:53.198Z,1478887373.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:53.341Z,1478887373.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:53.572Z,1478887373.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:53.701Z,1478887373.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:53.980Z,1478887373.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:54.105Z,1478887374.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:54.500Z,1478887374.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:54.776Z,1478887374.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:54.918Z,1478887374.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:55.311Z,1478887375.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:55.528Z,1478887375.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:55.711Z,1478887375.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:56.101Z,1478887376.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:56.324Z,1478887376.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:56.504Z,1478887376.504 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:56.504Z,1478887376.504 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 244
2016-11-11T18:02:56.504Z,1478887376.504 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:02:56.511Z,1478887376.511 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:56.511Z,1478887376.511 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 244
2016-11-11T18:02:56.511Z,1478887376.511 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:02:56.513Z,1478887376.513 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:56.513Z,1478887376.513 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 244
2016-11-11T18:02:56.513Z,1478887376.513 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:02:56.527Z,1478887376.527 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:02:56.528Z,1478887376.528 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:02:56.528Z,1478887376.528 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:02:56.954Z,1478887376.954 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:02:56.954Z,1478887376.954 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 244
2016-11-11T18:02:56.959Z,1478887376.959 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:02:56.959Z,1478887376.959 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 244
2016-11-11T18:02:56.960Z,1478887376.960 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:02:56.960Z,1478887376.960 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 244
2016-11-11T18:02:57.072Z,1478887377.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:57.302Z,1478887377.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:02:57.303Z,1478887377.303 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:02:57.304Z,1478887377.304 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:02:57.308Z,1478887377.308 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:02:57.309Z,1478887377.309 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:02:57.309Z,1478887377.309 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:02:57.310Z,1478887377.310 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:02:57.310Z,1478887377.310 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:02:57.310Z,1478887377.310 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:02:57.737Z,1478887377.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:57.868Z,1478887377.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:58.098Z,1478887378.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:58.538Z,1478887378.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:58.664Z,1478887378.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:58.942Z,1478887378.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:59.072Z,1478887379.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:02:59.299Z,1478887379.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:59.709Z,1478887379.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:02:59.868Z,1478887379.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:00.110Z,1478887380.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:00.503Z,1478887380.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:00.664Z,1478887380.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:00.900Z,1478887380.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:01.072Z,1478887381.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:01.310Z,1478887381.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:01.702Z,1478887381.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:01.868Z,1478887381.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:02.109Z,1478887382.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:02.510Z,1478887382.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:02.664Z,1478887382.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:02.902Z,1478887382.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:03.072Z,1478887383.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:03.309Z,1478887383.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:03.701Z,1478887383.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:03.868Z,1478887383.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:04.102Z,1478887384.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:04.509Z,1478887384.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:04.664Z,1478887384.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:04.917Z,1478887384.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:05.152Z,1478887385.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:05.301Z,1478887385.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:05.715Z,1478887385.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:05.948Z,1478887385.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:06.109Z,1478887386.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:06.504Z,1478887386.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:06.744Z,1478887386.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:06.910Z,1478887386.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:07.312Z,1478887387.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:07.512Z,1478887387.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:07.709Z,1478887387.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:08.113Z,1478887388.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:08.308Z,1478887388.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:08.513Z,1478887388.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:08.912Z,1478887388.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:09.104Z,1478887389.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:09.313Z,1478887389.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:09.512Z,1478887389.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:09.717Z,1478887389.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:10.117Z,1478887390.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:10.308Z,1478887390.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:10.521Z,1478887390.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:10.965Z,1478887390.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:11.048Z,1478887391.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:11.300Z,1478887391.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:11.749Z,1478887391.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:11.844Z,1478887391.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:12.101Z,1478887392.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:12.541Z,1478887392.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:12.640Z,1478887392.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:12.943Z,1478887392.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:13.060Z,1478887393.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:13.310Z,1478887393.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:13.705Z,1478887393.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:13.856Z,1478887393.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:14.107Z,1478887394.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:14.513Z,1478887394.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:14.652Z,1478887394.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:14.917Z,1478887394.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:15.060Z,1478887395.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:15.297Z,1478887395.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:15.697Z,1478887395.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:15.856Z,1478887395.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:16.092Z,1478887396.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:16.501Z,1478887396.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:16.652Z,1478887396.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:16.912Z,1478887396.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:17.060Z,1478887397.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:17.312Z,1478887397.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:17.713Z,1478887397.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:17.856Z,1478887397.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:18.097Z,1478887398.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:18.495Z,1478887398.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:18.652Z,1478887398.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:18.904Z,1478887398.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:19.132Z,1478887399.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:19.305Z,1478887399.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:19.699Z,1478887399.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:19.928Z,1478887399.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:20.109Z,1478887400.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:20.509Z,1478887400.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:20.724Z,1478887400.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:20.900Z,1478887400.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:21.308Z,1478887401.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:21.492Z,1478887401.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:21.707Z,1478887401.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:22.109Z,1478887402.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:22.288Z,1478887402.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:22.502Z,1478887402.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:22.905Z,1478887402.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:23.086Z,1478887403.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:23.308Z,1478887403.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:23.500Z,1478887403.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:23.713Z,1478887403.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:24.108Z,1478887404.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:24.296Z,1478887404.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:24.509Z,1478887404.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:24.974Z,1478887404.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:25.032Z,1478887405.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:25.314Z,1478887405.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:25.734Z,1478887405.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:25.828Z,1478887405.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:26.108Z,1478887406.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:26.577Z,1478887406.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:26.628Z,1478887406.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:26.925Z,1478887406.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:27.036Z,1478887407.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:27.306Z,1478887407.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:27.717Z,1478887407.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:27.832Z,1478887407.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:28.102Z,1478887408.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:28.513Z,1478887408.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:28.628Z,1478887408.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:28.897Z,1478887408.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:29.036Z,1478887409.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:29.292Z,1478887409.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:29.699Z,1478887409.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:29.832Z,1478887409.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:30.098Z,1478887410.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:30.496Z,1478887410.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:30.628Z,1478887410.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:30.905Z,1478887410.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:31.036Z,1478887411.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:31.305Z,1478887411.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:31.709Z,1478887411.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:31.832Z,1478887411.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:32.109Z,1478887412.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:32.509Z,1478887412.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:32.628Z,1478887412.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:32.908Z,1478887412.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:33.112Z,1478887413.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:33.312Z,1478887413.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:33.708Z,1478887413.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:33.908Z,1478887413.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:34.108Z,1478887414.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:34.511Z,1478887414.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:34.704Z,1478887414.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:34.912Z,1478887414.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:35.309Z,1478887415.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:35.464Z,1478887415.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:35.718Z,1478887415.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:36.120Z,1478887416.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:36.260Z,1478887416.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:36.492Z,1478887416.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:36.897Z,1478887416.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:37.057Z,1478887417.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:37.297Z,1478887417.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:37.468Z,1478887417.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:37.696Z,1478887417.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:38.098Z,1478887418.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:38.266Z,1478887418.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:38.505Z,1478887418.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:38.963Z,1478887418.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:39.024Z,1478887419.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:39.311Z,1478887419.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:39.733Z,1478887419.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:39.820Z,1478887419.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:40.108Z,1478887420.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:40.518Z,1478887420.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:40.616Z,1478887420.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:40.941Z,1478887420.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:41.028Z,1478887421.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:41.295Z,1478887421.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:41.695Z,1478887421.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:41.824Z,1478887421.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:42.095Z,1478887422.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:42.498Z,1478887422.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:42.620Z,1478887422.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:42.913Z,1478887422.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:43.028Z,1478887423.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:43.308Z,1478887423.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:43.701Z,1478887423.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:43.824Z,1478887423.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:44.108Z,1478887424.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:44.501Z,1478887424.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:44.620Z,1478887424.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:44.908Z,1478887424.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:45.032Z,1478887425.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:45.311Z,1478887425.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:45.712Z,1478887425.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:45.828Z,1478887425.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:46.100Z,1478887426.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:46.511Z,1478887426.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:46.625Z,1478887426.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:46.910Z,1478887426.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:47.112Z,1478887427.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:47.312Z,1478887427.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:47.711Z,1478887427.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:47.908Z,1478887427.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:48.112Z,1478887428.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:48.512Z,1478887428.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:48.704Z,1478887428.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:48.909Z,1478887428.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:48.918Z,1478887428.918 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T18:03:48.918Z,1478887428.918 [Default:CheckIn:C.Wait] Stopped
2016-11-11T18:03:48.918Z,1478887428.918 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T18:03:48.918Z,1478887428.918 [Default:CheckIn:D] Running Loop=1
2016-11-11T18:03:49.300Z,1478887429.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:49.325Z,1478887429.325 [Default:CheckIn:D] Stopped
2016-11-11T18:03:49.325Z,1478887429.325 [Default:CheckIn:E] Running Loop=1
2016-11-11T18:03:49.461Z,1478887429.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:49.700Z,1478887429.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:49.709Z,1478887429.709 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 793.800260 min 
2016-11-11T18:03:49.709Z,1478887429.709 [Default:CheckIn:E] Stopped
2016-11-11T18:03:49.709Z,1478887429.709 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T18:03:49.709Z,1478887429.709 [Default:CheckIn] Stopped
2016-11-11T18:03:49.709Z,1478887429.709 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T18:03:49.710Z,1478887429.710 [Default:CheckIn](INFO): Running loop #77
2016-11-11T18:03:49.710Z,1478887429.710 [Default:CheckIn] Running Loop=77
2016-11-11T18:03:49.710Z,1478887429.710 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T18:03:49.710Z,1478887429.710 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T18:03:50.105Z,1478887430.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:50.256Z,1478887430.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:51.052Z,1478887431.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:51.460Z,1478887431.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:52.256Z,1478887432.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:52.996Z,1478887432.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:53.509Z,1478887433.509 [NAL9602](INFO): Powering up
2016-11-11T18:03:53.621Z,1478887433.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:53.743Z,1478887433.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:53.792Z,1478887433.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:54.117Z,1478887434.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:54.567Z,1478887434.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:54.588Z,1478887434.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:54.903Z,1478887434.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:55.052Z,1478887435.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:55.339Z,1478887435.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:55.738Z,1478887435.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:55.848Z,1478887435.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:56.099Z,1478887436.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:56.584Z,1478887436.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:56.644Z,1478887436.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:56.934Z,1478887436.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:57.052Z,1478887437.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:57.309Z,1478887437.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:57.703Z,1478887437.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:57.848Z,1478887437.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:58.103Z,1478887438.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:58.568Z,1478887438.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:58.644Z,1478887438.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:58.911Z,1478887438.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:59.052Z,1478887439.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:03:59.314Z,1478887439.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:59.714Z,1478887439.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:03:59.848Z,1478887439.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:00.112Z,1478887440.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:00.516Z,1478887440.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:00.645Z,1478887440.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:00.912Z,1478887440.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:01.068Z,1478887441.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:01.310Z,1478887441.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:01.716Z,1478887441.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:01.864Z,1478887441.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:02.114Z,1478887442.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:02.512Z,1478887442.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:02.660Z,1478887442.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:02.920Z,1478887442.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:03.298Z,1478887443.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:03.428Z,1478887443.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:03.720Z,1478887443.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:04.132Z,1478887444.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:04.224Z,1478887444.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:04.465Z,1478887444.465 [NAL9602](INFO): NAL9602 initialized
2016-11-11T18:04:04.497Z,1478887444.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:04.908Z,1478887444.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:05.020Z,1478887445.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:05.265Z,1478887445.265 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T18:04:05.265Z,1478887445.265 [NAL9602] Data Fault, FailCount= 1
2016-11-11T18:04:05.265Z,1478887445.265 [NAL9602](ERROR): Data Fault
2016-11-11T18:04:05.329Z,1478887445.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:05.361Z,1478887445.361 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T18:04:05.440Z,1478887445.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:05.669Z,1478887445.668 [NAL9602](INFO): Powering down
2016-11-11T18:04:05.731Z,1478887445.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:06.131Z,1478887446.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:06.236Z,1478887446.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:06.553Z,1478887446.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:06.625Z,1478887446.625 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T18:04:06.625Z,1478887446.625 [NAL9602] No Fault, FailCount= 1
2016-11-11T18:04:06.925Z,1478887446.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:06.000Z,1478887447.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:07.318Z,1478887447.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:07.737Z,1478887447.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:07.796Z,1478887447.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:08.137Z,1478887448.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:08.563Z,1478887448.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:08.592Z,1478887448.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:08.938Z,1478887448.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:08.000Z,1478887449.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:09.319Z,1478887449.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:09.733Z,1478887449.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:09.796Z,1478887449.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:10.139Z,1478887450.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:10.550Z,1478887450.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:10.592Z,1478887450.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:10.873Z,1478887450.873 [NAL9602](INFO): Powering up NAL9602
2016-11-11T18:04:10.927Z,1478887450.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:10.000Z,1478887451.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:11.312Z,1478887451.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:11.708Z,1478887451.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:11.796Z,1478887451.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:12.117Z,1478887452.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:12.548Z,1478887452.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:12.592Z,1478887452.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:12.912Z,1478887452.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:13.012Z,1478887453.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:13.289Z,1478887453.289 [PNI_TCM](ERROR): CRC does not match. Expected:0x17510 got:0x48992
2016-11-11T18:04:13.313Z,1478887453.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:13.715Z,1478887453.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:13.808Z,1478887453.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:14.112Z,1478887454.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:14.516Z,1478887454.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:14.605Z,1478887454.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:14.915Z,1478887454.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:15.052Z,1478887455.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:15.329Z,1478887455.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:15.706Z,1478887455.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:15.848Z,1478887455.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:16.109Z,1478887456.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:16.509Z,1478887456.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:16.644Z,1478887456.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:16.921Z,1478887456.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:17.313Z,1478887457.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:17.432Z,1478887457.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:17.698Z,1478887457.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:18.116Z,1478887458.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:18.228Z,1478887458.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:18.521Z,1478887458.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:18.925Z,1478887458.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:19.024Z,1478887459.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:19.309Z,1478887459.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:19.432Z,1478887459.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:19.713Z,1478887459.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:20.121Z,1478887460.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:20.230Z,1478887460.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:20.573Z,1478887460.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:20.906Z,1478887460.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:20.968Z,1478887460.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:21.316Z,1478887461.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:21.717Z,1478887461.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:21.764Z,1478887461.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:22.065Z,1478887462.065 [NAL9602](INFO): NAL9602 initialized
2016-11-11T18:04:22.138Z,1478887462.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:22.560Z,1478887462.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:22.602Z,1478887462.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:22.919Z,1478887462.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:22.980Z,1478887462.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:23.346Z,1478887463.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:23.733Z,1478887463.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:23.776Z,1478887463.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:24.137Z,1478887464.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:24.567Z,1478887464.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:24.580Z,1478887464.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:24.921Z,1478887464.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:24.988Z,1478887464.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:25.308Z,1478887465.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:25.708Z,1478887465.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:25.784Z,1478887465.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:26.109Z,1478887466.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:26.537Z,1478887466.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:26.580Z,1478887466.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:26.899Z,1478887466.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:26.992Z,1478887466.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:27.313Z,1478887467.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:27.703Z,1478887467.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:27.788Z,1478887467.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:28.117Z,1478887468.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:28.518Z,1478887468.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:28.585Z,1478887468.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:28.909Z,1478887468.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:29.032Z,1478887469.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:29.323Z,1478887469.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:29.712Z,1478887469.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:29.828Z,1478887469.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:30.101Z,1478887470.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:30.529Z,1478887470.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:30.624Z,1478887470.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:30.900Z,1478887470.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:31.316Z,1478887471.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:31.416Z,1478887471.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:31.721Z,1478887471.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:32.107Z,1478887472.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:32.212Z,1478887472.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:32.522Z,1478887472.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:32.000Z,1478887473.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:33.008Z,1478887473.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:33.317Z,1478887473.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:33.416Z,1478887473.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:33.704Z,1478887473.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:34.112Z,1478887474.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:34.212Z,1478887474.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:34.544Z,1478887474.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:34.916Z,1478887474.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:34.972Z,1478887474.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:35.314Z,1478887475.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:35.712Z,1478887475.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:35.768Z,1478887475.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:36.098Z,1478887476.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:36.564Z,1478887476.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:36.581Z,1478887476.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:36.946Z,1478887476.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:36.972Z,1478887476.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:37.307Z,1478887477.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:37.731Z,1478887477.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:37.768Z,1478887477.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:38.147Z,1478887478.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:38.525Z,1478887478.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:38.564Z,1478887478.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:38.940Z,1478887478.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:38.972Z,1478887478.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:39.345Z,1478887479.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:39.709Z,1478887479.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:39.768Z,1478887479.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:40.117Z,1478887480.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:40.517Z,1478887480.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:40.564Z,1478887480.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:40.910Z,1478887480.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:40.972Z,1478887480.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:41.310Z,1478887481.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:41.719Z,1478887481.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:41.768Z,1478887481.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:42.118Z,1478887482.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:42.514Z,1478887482.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:42.565Z,1478887482.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:42.920Z,1478887482.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:43.028Z,1478887483.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:43.305Z,1478887483.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:43.705Z,1478887483.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:43.824Z,1478887483.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:44.105Z,1478887484.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:44.513Z,1478887484.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:44.620Z,1478887484.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:44.969Z,1478887484.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:45.319Z,1478887485.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:45.388Z,1478887485.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:45.718Z,1478887485.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:46.107Z,1478887486.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:46.184Z,1478887486.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:46.513Z,1478887486.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:46.960Z,1478887486.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:46.980Z,1478887486.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:47.318Z,1478887487.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:47.388Z,1478887487.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:47.712Z,1478887487.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:48.101Z,1478887488.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:48.184Z,1478887488.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:48.510Z,1478887488.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:48.904Z,1478887488.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:48.936Z,1478887488.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:49.303Z,1478887489.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:49.709Z,1478887489.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:49.732Z,1478887489.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:50.106Z,1478887490.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:50.530Z,1478887490.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:50.940Z,1478887490.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:51.736Z,1478887491.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:52.532Z,1478887492.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:52.940Z,1478887492.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:53.656Z,1478887493.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:53.736Z,1478887493.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:53.762Z,1478887493.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:54.189Z,1478887494.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:54.532Z,1478887494.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:54.582Z,1478887494.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:54.940Z,1478887494.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:54.984Z,1478887494.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:55.380Z,1478887495.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:55.736Z,1478887495.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:55.749Z,1478887495.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:56.146Z,1478887496.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:56.533Z,1478887496.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:56.590Z,1478887496.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:56.958Z,1478887496.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:57.064Z,1478887497.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:57.346Z,1478887497.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:57.770Z,1478887497.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:57.860Z,1478887497.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:58.171Z,1478887498.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:58.567Z,1478887498.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:58.656Z,1478887498.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:58.994Z,1478887498.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:59.348Z,1478887499.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:04:59.364Z,1478887499.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:04:59.753Z,1478887499.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:00.148Z,1478887500.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:00.160Z,1478887500.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:00.556Z,1478887500.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:00.956Z,1478887500.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:00.988Z,1478887500.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:01.353Z,1478887501.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:01.380Z,1478887501.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:01.757Z,1478887501.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:02.153Z,1478887502.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:02.184Z,1478887502.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:02.559Z,1478887502.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:02.856Z,1478887502.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:02.967Z,1478887502.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:03.369Z,1478887503.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:03.652Z,1478887503.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:03.756Z,1478887503.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:04.153Z,1478887504.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:04.449Z,1478887504.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:04.557Z,1478887504.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:04.856Z,1478887504.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:04.953Z,1478887504.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:05.360Z,1478887505.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:05.652Z,1478887505.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:05.749Z,1478887505.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:06.150Z,1478887506.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:06.448Z,1478887506.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:06.556Z,1478887506.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:06.856Z,1478887506.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:06.956Z,1478887506.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:07.429Z,1478887507.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:07.652Z,1478887507.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:07.773Z,1478887507.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:08.179Z,1478887508.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:08.448Z,1478887508.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:08.557Z,1478887508.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:08.856Z,1478887508.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:08.984Z,1478887508.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:09.382Z,1478887509.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:09.652Z,1478887509.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:09.747Z,1478887509.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:10.157Z,1478887510.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:10.448Z,1478887510.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:10.575Z,1478887510.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:10.954Z,1478887510.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:11.008Z,1478887511.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:11.372Z,1478887511.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:11.765Z,1478887511.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:11.804Z,1478887511.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:12.160Z,1478887512.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:12.561Z,1478887512.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:12.600Z,1478887512.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:12.965Z,1478887512.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:13.360Z,1478887513.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:13.372Z,1478887513.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:13.761Z,1478887513.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:14.161Z,1478887514.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:14.168Z,1478887514.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:14.568Z,1478887514.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:14.961Z,1478887514.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:14.964Z,1478887514.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:15.345Z,1478887515.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:15.372Z,1478887515.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:15.770Z,1478887515.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:16.150Z,1478887516.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:16.168Z,1478887516.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:16.557Z,1478887516.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:16.836Z,1478887516.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:16.957Z,1478887516.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:17.360Z,1478887517.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:17.632Z,1478887517.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:17.753Z,1478887517.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:18.161Z,1478887518.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:18.430Z,1478887518.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:18.556Z,1478887518.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:18.840Z,1478887518.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:18.956Z,1478887518.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:19.356Z,1478887519.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:19.636Z,1478887519.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:19.772Z,1478887519.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:20.163Z,1478887520.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:20.432Z,1478887520.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:20.562Z,1478887520.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:20.844Z,1478887520.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:20.985Z,1478887520.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:21.385Z,1478887521.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:21.640Z,1478887521.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:21.768Z,1478887521.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:22.177Z,1478887522.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:22.436Z,1478887522.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:22.565Z,1478887522.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:22.844Z,1478887522.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:22.981Z,1478887522.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:23.377Z,1478887523.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:23.640Z,1478887523.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:23.765Z,1478887523.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:24.140Z,1478887524.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:24.436Z,1478887524.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:24.584Z,1478887524.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:24.973Z,1478887524.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:24.976Z,1478887524.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:25.347Z,1478887525.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:25.749Z,1478887525.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:25.772Z,1478887525.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:26.147Z,1478887526.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:26.549Z,1478887526.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:26.568Z,1478887526.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:26.956Z,1478887526.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:27.288Z,1478887527.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:27.358Z,1478887527.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:27.752Z,1478887527.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:28.084Z,1478887528.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:28.157Z,1478887528.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:28.550Z,1478887528.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:28.881Z,1478887528.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:28.974Z,1478887528.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:29.292Z,1478887529.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:29.373Z,1478887529.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:29.753Z,1478887529.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:30.088Z,1478887530.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:30.161Z,1478887530.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:30.562Z,1478887530.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:30.816Z,1478887530.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:30.957Z,1478887530.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:31.341Z,1478887531.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:31.612Z,1478887531.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:31.770Z,1478887531.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:32.144Z,1478887532.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:32.408Z,1478887532.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:32.573Z,1478887532.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:32.816Z,1478887532.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:32.956Z,1478887532.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:33.351Z,1478887533.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:33.612Z,1478887533.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:33.751Z,1478887533.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:34.153Z,1478887534.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:34.408Z,1478887534.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:34.549Z,1478887534.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:34.816Z,1478887534.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:34.958Z,1478887534.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:35.406Z,1478887535.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:35.612Z,1478887535.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:35.762Z,1478887535.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:36.205Z,1478887536.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:36.408Z,1478887536.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:36.561Z,1478887536.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:36.816Z,1478887536.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:36.973Z,1478887536.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:37.377Z,1478887537.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:37.612Z,1478887537.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:37.761Z,1478887537.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:38.160Z,1478887538.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:38.408Z,1478887538.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:38.571Z,1478887538.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:38.936Z,1478887538.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:38.942Z,1478887538.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:39.345Z,1478887539.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:39.732Z,1478887539.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:39.748Z,1478887539.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:40.153Z,1478887540.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:40.528Z,1478887540.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:40.549Z,1478887540.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:40.957Z,1478887540.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:41.268Z,1478887541.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:41.352Z,1478887541.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:41.748Z,1478887541.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:42.064Z,1478887542.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:42.153Z,1478887542.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:42.550Z,1478887542.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:42.860Z,1478887542.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:42.956Z,1478887542.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:43.268Z,1478887543.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:43.354Z,1478887543.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:43.757Z,1478887543.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:44.064Z,1478887544.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:44.162Z,1478887544.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:44.569Z,1478887544.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:44.792Z,1478887544.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:44.957Z,1478887544.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:45.356Z,1478887545.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:45.590Z,1478887545.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:45.756Z,1478887545.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:46.157Z,1478887546.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:46.385Z,1478887546.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:46.556Z,1478887546.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:46.796Z,1478887546.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:46.956Z,1478887546.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:47.354Z,1478887547.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:47.592Z,1478887547.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:47.754Z,1478887547.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:48.156Z,1478887548.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:48.389Z,1478887548.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:48.558Z,1478887548.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:48.800Z,1478887548.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:48.985Z,1478887548.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:49.385Z,1478887549.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:49.598Z,1478887549.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:49.745Z,1478887549.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:50.149Z,1478887550.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:50.392Z,1478887550.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:50.800Z,1478887550.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:51.596Z,1478887551.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:52.392Z,1478887552.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:52.900Z,1478887552.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:53.614Z,1478887553.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:53.696Z,1478887553.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:53.742Z,1478887553.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:54.145Z,1478887554.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:54.492Z,1478887554.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:54.546Z,1478887554.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:54.921Z,1478887554.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:55.244Z,1478887555.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:55.314Z,1478887555.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:55.707Z,1478887555.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:56.040Z,1478887556.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:56.121Z,1478887556.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:56.509Z,1478887556.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:56.837Z,1478887556.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:56.918Z,1478887556.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:57.244Z,1478887557.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:57.320Z,1478887557.320 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:57.320Z,1478887557.320 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 245
2016-11-11T18:05:57.320Z,1478887557.320 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:05:57.327Z,1478887557.327 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:57.327Z,1478887557.328 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 245
2016-11-11T18:05:57.328Z,1478887557.328 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:05:57.330Z,1478887557.330 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:57.330Z,1478887557.330 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 245
2016-11-11T18:05:57.330Z,1478887557.330 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:05:57.374Z,1478887557.374 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:05:57.374Z,1478887557.374 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:05:57.375Z,1478887557.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:05:57.734Z,1478887557.734 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:05:57.734Z,1478887557.734 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 245
2016-11-11T18:05:57.735Z,1478887557.735 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:05:57.735Z,1478887557.735 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 245
2016-11-11T18:05:57.736Z,1478887557.736 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:05:57.736Z,1478887557.736 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 245
2016-11-11T18:05:58.040Z,1478887558.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:58.127Z,1478887558.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:05:58.127Z,1478887558.128 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:05:58.128Z,1478887558.128 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:05:58.132Z,1478887558.132 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:05:58.133Z,1478887558.133 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:05:58.133Z,1478887558.133 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:05:58.134Z,1478887558.134 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:05:58.134Z,1478887558.134 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:05:58.134Z,1478887558.134 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:05:58.513Z,1478887558.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:58.772Z,1478887558.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:58.909Z,1478887558.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:59.308Z,1478887559.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:05:59.568Z,1478887559.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:05:59.712Z,1478887559.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:00.118Z,1478887560.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:00.364Z,1478887560.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:00.525Z,1478887560.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:00.772Z,1478887560.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:00.916Z,1478887560.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:01.316Z,1478887561.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:01.568Z,1478887561.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:01.712Z,1478887561.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:02.118Z,1478887562.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:02.364Z,1478887562.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:02.505Z,1478887562.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:02.772Z,1478887562.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:02.905Z,1478887562.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:03.306Z,1478887563.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:03.568Z,1478887563.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:03.717Z,1478887563.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:04.109Z,1478887564.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:04.364Z,1478887564.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:04.517Z,1478887564.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:04.772Z,1478887564.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:04.914Z,1478887564.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:05.322Z,1478887565.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:05.568Z,1478887565.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:05.714Z,1478887565.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:06.119Z,1478887566.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:06.364Z,1478887566.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:06.617Z,1478887566.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:06.905Z,1478887566.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:06.928Z,1478887566.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:07.338Z,1478887567.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:07.713Z,1478887567.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:07.724Z,1478887567.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:08.139Z,1478887568.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:08.160Z,1478887568.160 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T18:06:08.529Z,1478887568.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:08.540Z,1478887568.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:08.909Z,1478887568.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:09.228Z,1478887569.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:09.312Z,1478887569.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:09.718Z,1478887569.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:10.024Z,1478887570.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:10.113Z,1478887570.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:10.518Z,1478887570.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:10.820Z,1478887570.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:10.915Z,1478887570.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:11.228Z,1478887571.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:11.317Z,1478887571.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:11.709Z,1478887571.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:12.024Z,1478887572.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:12.121Z,1478887572.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:12.517Z,1478887572.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:12.752Z,1478887572.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:12.910Z,1478887572.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:13.278Z,1478887573.278 [NAL9602](INFO): SBD MO Status=0, MOMSN=354, MT Status=0, MTMSN=0
2016-11-11T18:06:13.278Z,1478887573.278 [NAL9602](INFO): No messages in MT queue
2016-11-11T18:06:13.328Z,1478887573.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:13.550Z,1478887573.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:13.721Z,1478887573.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:14.122Z,1478887574.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:14.344Z,1478887574.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:14.522Z,1478887574.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:14.756Z,1478887574.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:14.934Z,1478887574.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:15.316Z,1478887575.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:15.552Z,1478887575.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:15.719Z,1478887575.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:16.123Z,1478887576.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:16.349Z,1478887576.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:16.517Z,1478887576.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:16.760Z,1478887576.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:16.926Z,1478887576.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:17.327Z,1478887577.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:17.556Z,1478887577.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:17.722Z,1478887577.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:18.120Z,1478887578.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:18.352Z,1478887578.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:18.520Z,1478887578.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:18.760Z,1478887578.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:18.920Z,1478887578.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:19.318Z,1478887579.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:19.556Z,1478887579.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:19.734Z,1478887579.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:20.126Z,1478887580.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:20.352Z,1478887580.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:20.573Z,1478887580.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:20.844Z,1478887580.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:20.949Z,1478887580.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:21.313Z,1478887581.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:21.640Z,1478887581.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:21.734Z,1478887581.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:22.109Z,1478887582.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:22.436Z,1478887582.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:22.531Z,1478887582.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:22.947Z,1478887582.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:23.224Z,1478887583.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:23.347Z,1478887583.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:23.717Z,1478887583.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:24.020Z,1478887584.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:24.116Z,1478887584.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:24.526Z,1478887584.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:24.816Z,1478887584.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:24.912Z,1478887584.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:25.224Z,1478887585.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:25.315Z,1478887585.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:25.732Z,1478887585.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:26.020Z,1478887586.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:26.125Z,1478887586.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:26.533Z,1478887586.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:26.748Z,1478887586.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:26.922Z,1478887586.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:27.316Z,1478887587.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:27.545Z,1478887587.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:27.719Z,1478887587.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:28.122Z,1478887588.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:28.340Z,1478887588.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:28.517Z,1478887588.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:28.748Z,1478887588.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:28.927Z,1478887588.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:29.329Z,1478887589.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:29.544Z,1478887589.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:29.722Z,1478887589.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:30.119Z,1478887590.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:30.340Z,1478887590.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:30.520Z,1478887590.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:30.748Z,1478887590.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:30.914Z,1478887590.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:31.327Z,1478887591.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:31.544Z,1478887591.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:31.733Z,1478887591.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:32.133Z,1478887592.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:32.340Z,1478887592.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:32.527Z,1478887592.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:32.748Z,1478887592.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:32.901Z,1478887592.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:33.313Z,1478887593.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:33.544Z,1478887593.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:33.704Z,1478887593.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:34.110Z,1478887594.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:34.340Z,1478887594.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:34.517Z,1478887594.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:34.824Z,1478887594.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:34.993Z,1478887594.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:35.327Z,1478887595.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:35.620Z,1478887595.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:35.759Z,1478887595.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:36.117Z,1478887596.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:36.416Z,1478887596.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:36.550Z,1478887596.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:36.912Z,1478887596.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:37.180Z,1478887597.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:37.334Z,1478887597.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:37.732Z,1478887597.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:37.976Z,1478887597.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:38.126Z,1478887598.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:38.523Z,1478887598.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:38.772Z,1478887598.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:38.922Z,1478887598.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:39.180Z,1478887599.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:39.333Z,1478887599.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:39.729Z,1478887599.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:39.976Z,1478887599.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:40.106Z,1478887600.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:40.507Z,1478887600.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:40.712Z,1478887600.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:40.912Z,1478887600.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:41.340Z,1478887601.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:41.508Z,1478887601.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:41.736Z,1478887601.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:42.113Z,1478887602.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:42.304Z,1478887602.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:42.520Z,1478887602.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:42.716Z,1478887602.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:42.911Z,1478887602.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:43.306Z,1478887603.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:43.512Z,1478887603.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:43.721Z,1478887603.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:44.121Z,1478887604.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:44.308Z,1478887604.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:44.529Z,1478887604.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:44.716Z,1478887604.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:44.920Z,1478887604.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:45.310Z,1478887605.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:45.512Z,1478887605.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:45.721Z,1478887605.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:46.123Z,1478887606.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:46.308Z,1478887606.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:46.521Z,1478887606.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:46.716Z,1478887606.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:46.932Z,1478887606.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:47.322Z,1478887607.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:47.512Z,1478887607.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:47.722Z,1478887607.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:48.119Z,1478887608.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:48.308Z,1478887608.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:48.520Z,1478887608.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:48.800Z,1478887608.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:48.911Z,1478887608.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:49.349Z,1478887609.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:49.596Z,1478887609.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:49.721Z,1478887609.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:50.115Z,1478887610.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:50.392Z,1478887610.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:50.517Z,1478887610.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:51.160Z,1478887611.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:51.956Z,1478887611.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:52.752Z,1478887612.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:53.164Z,1478887613.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:53.857Z,1478887613.856 [BPC1](ERROR): Failed to receive battery data
2016-11-11T18:06:53.857Z,1478887613.857 [BPC1] Communications Fault, FailCount= 1
2016-11-11T18:06:53.857Z,1478887613.857 [BPC1](ERROR): Communications Fault
2016-11-11T18:06:53.865Z,1478887613.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:53.916Z,1478887613.916 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T18:06:53.960Z,1478887613.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:53.985Z,1478887613.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:54.385Z,1478887614.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:54.688Z,1478887614.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:54.789Z,1478887614.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:54.826Z,1478887614.826 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:06:54.826Z,1478887614.826 [BPC1] No Fault, FailCount= 1
2016-11-11T18:06:55.241Z,1478887615.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:55.504Z,1478887615.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:55.588Z,1478887615.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:55.980Z,1478887615.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:56.300Z,1478887616.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:56.384Z,1478887616.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:56.712Z,1478887616.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:56.791Z,1478887616.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:57.197Z,1478887617.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:57.508Z,1478887617.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:57.601Z,1478887617.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:58.036Z,1478887618.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:58.304Z,1478887618.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:58.406Z,1478887618.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:58.712Z,1478887618.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:58.786Z,1478887618.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:59.190Z,1478887619.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:59.508Z,1478887619.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:06:59.606Z,1478887619.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:06:59.999Z,1478887619.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:00.304Z,1478887620.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:00.382Z,1478887620.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:00.712Z,1478887620.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:00.780Z,1478887620.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:01.190Z,1478887621.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:01.510Z,1478887621.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:01.601Z,1478887621.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:01.990Z,1478887621.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:02.304Z,1478887622.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:02.449Z,1478887622.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:02.778Z,1478887622.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:02.884Z,1478887622.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:03.194Z,1478887623.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:03.586Z,1478887623.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:03.680Z,1478887623.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:03.998Z,1478887623.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:04.369Z,1478887624.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:04.476Z,1478887624.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:04.818Z,1478887624.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:05.181Z,1478887625.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:05.240Z,1478887625.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:05.597Z,1478887625.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:05.991Z,1478887625.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:06.036Z,1478887626.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:06.405Z,1478887626.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:06.818Z,1478887626.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:06.832Z,1478887626.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:07.200Z,1478887627.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:07.256Z,1478887627.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:07.585Z,1478887627.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:07.972Z,1478887627.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:08.052Z,1478887628.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:08.421Z,1478887628.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:08.676Z,1478887628.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:08.815Z,1478887628.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:09.185Z,1478887629.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:09.472Z,1478887629.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:09.600Z,1478887629.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:10.010Z,1478887630.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:10.269Z,1478887630.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:10.387Z,1478887630.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:10.680Z,1478887630.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:10.805Z,1478887630.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:11.218Z,1478887631.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:11.476Z,1478887631.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:11.613Z,1478887631.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:12.014Z,1478887632.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:12.272Z,1478887632.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:12.393Z,1478887632.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:12.684Z,1478887632.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:12.769Z,1478887632.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:13.183Z,1478887633.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:13.480Z,1478887633.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:13.591Z,1478887633.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:13.000Z,1478887634.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:14.276Z,1478887634.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:14.382Z,1478887634.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:14.684Z,1478887634.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:14.820Z,1478887634.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:15.215Z,1478887635.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:15.480Z,1478887635.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:15.598Z,1478887635.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:16.014Z,1478887636.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:16.276Z,1478887636.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:16.493Z,1478887636.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:16.827Z,1478887636.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:16.880Z,1478887636.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:17.215Z,1478887637.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:17.602Z,1478887637.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:17.676Z,1478887637.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:18.041Z,1478887638.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:18.417Z,1478887638.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:18.472Z,1478887638.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:18.791Z,1478887638.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:19.180Z,1478887639.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:19.188Z,1478887639.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:19.586Z,1478887639.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:19.984Z,1478887639.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:19.993Z,1478887639.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:20.371Z,1478887640.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:20.780Z,1478887640.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:20.808Z,1478887640.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:21.186Z,1478887641.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:21.200Z,1478887641.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:21.596Z,1478887641.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:21.991Z,1478887641.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:21.996Z,1478887641.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:22.425Z,1478887642.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:22.660Z,1478887642.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:22.804Z,1478887642.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:23.221Z,1478887643.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:23.456Z,1478887643.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:23.592Z,1478887643.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:24.022Z,1478887644.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:24.252Z,1478887644.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:24.396Z,1478887644.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:24.660Z,1478887644.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:24.802Z,1478887644.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:25.200Z,1478887645.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:25.456Z,1478887645.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:25.601Z,1478887645.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:25.995Z,1478887645.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:26.254Z,1478887646.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:26.380Z,1478887646.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:26.664Z,1478887646.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:26.785Z,1478887646.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:27.205Z,1478887647.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:27.460Z,1478887647.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:27.596Z,1478887647.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:27.962Z,1478887647.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:28.256Z,1478887648.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:28.394Z,1478887648.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:28.664Z,1478887648.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:28.782Z,1478887648.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:29.186Z,1478887649.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:29.460Z,1478887649.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:29.609Z,1478887649.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:30.003Z,1478887650.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:30.256Z,1478887650.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:30.390Z,1478887650.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:30.791Z,1478887650.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:30.820Z,1478887650.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:31.180Z,1478887651.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:31.576Z,1478887651.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:31.616Z,1478887651.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:31.983Z,1478887651.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:32.376Z,1478887652.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:32.412Z,1478887652.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:32.782Z,1478887652.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:33.092Z,1478887653.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:33.191Z,1478887653.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:33.603Z,1478887653.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:33.888Z,1478887653.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:33.974Z,1478887653.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:34.369Z,1478887654.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:34.684Z,1478887654.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:34.794Z,1478887654.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:35.092Z,1478887655.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:35.177Z,1478887655.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:35.581Z,1478887655.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:35.888Z,1478887655.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:35.986Z,1478887655.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:36.394Z,1478887656.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:36.622Z,1478887656.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:36.798Z,1478887656.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:37.197Z,1478887657.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:37.416Z,1478887657.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:37.601Z,1478887657.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:37.971Z,1478887657.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:38.212Z,1478887658.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:38.409Z,1478887658.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:38.620Z,1478887658.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:38.779Z,1478887658.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:39.210Z,1478887659.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:39.416Z,1478887659.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:39.617Z,1478887659.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:40.012Z,1478887660.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:40.212Z,1478887660.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:40.393Z,1478887660.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:40.620Z,1478887660.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:40.771Z,1478887660.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:41.174Z,1478887661.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:41.416Z,1478887661.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:41.578Z,1478887661.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:41.986Z,1478887661.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:42.212Z,1478887662.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:42.386Z,1478887662.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:42.620Z,1478887662.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:42.771Z,1478887662.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:43.180Z,1478887663.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:43.416Z,1478887663.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:43.574Z,1478887663.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:43.989Z,1478887663.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:44.212Z,1478887664.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:44.382Z,1478887664.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:44.732Z,1478887664.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:44.789Z,1478887664.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:45.185Z,1478887665.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:45.528Z,1478887665.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:45.594Z,1478887665.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:45.981Z,1478887665.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:46.324Z,1478887666.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:46.373Z,1478887666.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:46.781Z,1478887666.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:47.096Z,1478887667.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:47.170Z,1478887667.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:47.585Z,1478887667.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:47.893Z,1478887667.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:47.978Z,1478887667.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:48.385Z,1478887668.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:48.688Z,1478887668.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:48.785Z,1478887668.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:49.096Z,1478887669.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:49.170Z,1478887669.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:49.577Z,1478887669.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:49.892Z,1478887669.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:49.981Z,1478887669.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:50.381Z,1478887670.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:50.596Z,1478887670.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:50.838Z,1478887670.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:51.392Z,1478887671.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:52.188Z,1478887672.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:52.604Z,1478887672.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:53.400Z,1478887673.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:54.196Z,1478887674.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:54.367Z,1478887674.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:54.506Z,1478887674.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:54.608Z,1478887674.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:54.849Z,1478887674.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:55.282Z,1478887675.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:55.404Z,1478887675.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:55.650Z,1478887675.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:56.070Z,1478887676.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:56.200Z,1478887676.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:56.474Z,1478887676.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:56.608Z,1478887676.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:56.863Z,1478887676.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:57.261Z,1478887677.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:57.404Z,1478887677.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:57.642Z,1478887677.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:58.038Z,1478887678.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:58.200Z,1478887678.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:58.450Z,1478887678.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:58.688Z,1478887678.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:58.845Z,1478887678.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:59.249Z,1478887679.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:07:59.484Z,1478887679.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:07:59.650Z,1478887679.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:00.061Z,1478887680.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:00.280Z,1478887680.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:00.465Z,1478887680.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:00.848Z,1478887680.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:01.048Z,1478887681.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:01.254Z,1478887681.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:01.647Z,1478887681.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:01.844Z,1478887681.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:02.053Z,1478887682.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:02.505Z,1478887682.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:02.640Z,1478887682.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:02.854Z,1478887682.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:03.080Z,1478887683.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:03.259Z,1478887683.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:03.661Z,1478887683.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:03.876Z,1478887683.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:04.056Z,1478887684.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:04.468Z,1478887684.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:04.588Z,1478887684.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:04.840Z,1478887684.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:05.238Z,1478887685.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:05.384Z,1478887685.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:05.677Z,1478887685.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:06.081Z,1478887686.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:06.180Z,1478887686.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:06.496Z,1478887686.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:06.600Z,1478887686.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:06.849Z,1478887686.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:07.285Z,1478887687.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:07.396Z,1478887687.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:07.668Z,1478887687.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:08.077Z,1478887688.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:08.192Z,1478887688.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:08.503Z,1478887688.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:08.608Z,1478887688.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:08.858Z,1478887688.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:09.285Z,1478887689.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:09.404Z,1478887689.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:09.644Z,1478887689.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:10.086Z,1478887690.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:10.200Z,1478887690.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:10.490Z,1478887690.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:10.608Z,1478887690.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:10.853Z,1478887690.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:11.242Z,1478887691.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:11.404Z,1478887691.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:11.665Z,1478887691.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:12.057Z,1478887692.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:12.206Z,1478887692.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:12.465Z,1478887692.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:12.668Z,1478887692.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:12.858Z,1478887692.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:13.254Z,1478887693.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:13.464Z,1478887693.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:13.661Z,1478887693.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:14.045Z,1478887694.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:14.260Z,1478887694.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:14.447Z,1478887694.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:14.847Z,1478887694.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:15.036Z,1478887695.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:15.251Z,1478887695.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:15.643Z,1478887695.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:15.832Z,1478887695.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:16.052Z,1478887696.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:16.449Z,1478887696.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:16.628Z,1478887696.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:16.852Z,1478887696.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:17.036Z,1478887697.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:17.252Z,1478887697.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:17.661Z,1478887697.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:17.832Z,1478887697.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:18.057Z,1478887698.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:18.463Z,1478887698.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:18.580Z,1478887698.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:18.858Z,1478887698.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:19.316Z,1478887699.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:19.376Z,1478887699.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:19.658Z,1478887699.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:20.054Z,1478887700.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:20.172Z,1478887700.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:20.463Z,1478887700.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:20.580Z,1478887700.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:20.903Z,1478887700.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:21.270Z,1478887701.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:21.376Z,1478887701.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:21.641Z,1478887701.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:22.061Z,1478887702.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:22.172Z,1478887702.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:22.496Z,1478887702.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:22.584Z,1478887702.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:22.859Z,1478887702.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:23.297Z,1478887703.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:23.380Z,1478887703.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:23.659Z,1478887703.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:24.136Z,1478887704.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:24.176Z,1478887704.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:24.511Z,1478887704.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:24.584Z,1478887704.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:24.885Z,1478887704.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:25.250Z,1478887705.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:25.380Z,1478887705.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:25.644Z,1478887705.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:26.046Z,1478887706.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:26.177Z,1478887706.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:26.453Z,1478887706.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:26.644Z,1478887706.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:26.850Z,1478887706.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:27.251Z,1478887707.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:27.440Z,1478887707.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:27.643Z,1478887707.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:28.054Z,1478887708.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:28.236Z,1478887708.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:28.452Z,1478887708.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:28.857Z,1478887708.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:29.004Z,1478887709.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:29.253Z,1478887709.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:29.658Z,1478887709.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:29.800Z,1478887709.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:30.055Z,1478887710.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:30.461Z,1478887710.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:30.597Z,1478887710.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:30.853Z,1478887710.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:31.004Z,1478887711.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:31.258Z,1478887711.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:31.658Z,1478887711.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:31.800Z,1478887711.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:32.056Z,1478887712.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:32.465Z,1478887712.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:32.572Z,1478887712.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:32.869Z,1478887712.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:33.267Z,1478887713.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:33.368Z,1478887713.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:33.638Z,1478887713.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:34.043Z,1478887714.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:34.164Z,1478887714.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:34.447Z,1478887714.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:34.572Z,1478887714.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:34.846Z,1478887714.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:35.295Z,1478887715.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:35.368Z,1478887715.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:35.662Z,1478887715.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:36.105Z,1478887716.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:36.164Z,1478887716.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:36.497Z,1478887716.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:36.580Z,1478887716.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:36.870Z,1478887716.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:37.278Z,1478887717.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:37.376Z,1478887717.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:37.646Z,1478887717.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:38.098Z,1478887718.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:38.172Z,1478887718.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:38.477Z,1478887718.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:38.580Z,1478887718.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:38.858Z,1478887718.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:39.259Z,1478887719.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:39.377Z,1478887719.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:39.657Z,1478887719.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:40.068Z,1478887720.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:40.173Z,1478887720.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:40.457Z,1478887720.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:40.636Z,1478887720.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:40.867Z,1478887720.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:41.250Z,1478887721.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:41.432Z,1478887721.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:41.695Z,1478887721.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:42.078Z,1478887722.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:42.228Z,1478887722.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:42.450Z,1478887722.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:42.857Z,1478887722.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:42.992Z,1478887722.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:43.257Z,1478887723.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:43.670Z,1478887723.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:43.788Z,1478887723.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:44.038Z,1478887724.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:44.480Z,1478887724.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:44.584Z,1478887724.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:44.873Z,1478887724.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:44.992Z,1478887724.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:45.251Z,1478887725.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:45.645Z,1478887725.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:45.788Z,1478887725.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:46.087Z,1478887726.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:46.456Z,1478887726.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:46.548Z,1478887726.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:46.857Z,1478887726.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:47.252Z,1478887727.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:47.344Z,1478887727.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:47.663Z,1478887727.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:48.124Z,1478887728.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:48.140Z,1478887728.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:48.461Z,1478887728.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:48.548Z,1478887728.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:48.855Z,1478887728.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:49.288Z,1478887729.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:49.344Z,1478887729.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:49.655Z,1478887729.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:50.086Z,1478887730.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:50.113Z,1478887730.114 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T18:03:49.7Z
2016-11-11T18:08:50.114Z,1478887730.114 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T18:08:50.114Z,1478887730.114 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T18:08:50.140Z,1478887730.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:50.485Z,1478887730.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:50.552Z,1478887730.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:51.312Z,1478887731.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:51.348Z,1478887731.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:52.144Z,1478887732.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:52.552Z,1478887732.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:53.348Z,1478887733.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:54.145Z,1478887734.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:54.625Z,1478887734.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:54.691Z,1478887734.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:54.726Z,1478887734.726 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0308.lzma
2016-11-11T18:08:54.826Z,1478887734.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:55.202Z,1478887735.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:55.420Z,1478887735.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:55.522Z,1478887735.522 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0308.lzma.bak
2016-11-11T18:08:55.522Z,1478887735.522 [DataOverHttps](INFO): SBD MOMSN=4555639
2016-11-11T18:08:55.621Z,1478887735.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:56.216Z,1478887736.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:56.964Z,1478887736.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:56.980Z,1478887736.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:57.108Z,1478887737.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:08:57.760Z,1478887737.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:58.556Z,1478887738.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:58.976Z,1478887738.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:08:59.772Z,1478887739.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:00.496Z,1478887740.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:00.596Z,1478887740.596 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:00.597Z,1478887740.597 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 246
2016-11-11T18:09:00.597Z,1478887740.597 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:09:00.624Z,1478887740.624 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:00.624Z,1478887740.624 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 246
2016-11-11T18:09:00.624Z,1478887740.624 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:09:00.626Z,1478887740.626 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:00.626Z,1478887740.626 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 246
2016-11-11T18:09:00.626Z,1478887740.626 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:09:00.727Z,1478887740.727 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:09:00.727Z,1478887740.727 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:09:00.728Z,1478887740.727 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:09:00.885Z,1478887740.885 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:09:00.885Z,1478887740.885 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 246
2016-11-11T18:09:00.886Z,1478887740.886 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:09:00.886Z,1478887740.886 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 246
2016-11-11T18:09:00.886Z,1478887740.886 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:09:00.887Z,1478887740.886 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 246
2016-11-11T18:09:01.206Z,1478887741.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:09:01.206Z,1478887741.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:09:01.207Z,1478887741.207 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:09:01.211Z,1478887741.211 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:09:01.212Z,1478887741.212 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:09:01.212Z,1478887741.212 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:09:01.213Z,1478887741.213 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:09:01.213Z,1478887741.213 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:09:01.213Z,1478887741.213 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:09:01.292Z,1478887741.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:01.590Z,1478887741.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:01.945Z,1478887741.944 [NAL9602](INFO): Powering down
2016-11-11T18:09:02.027Z,1478887742.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:02.088Z,1478887742.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:02.394Z,1478887742.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:02.516Z,1478887742.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:03.312Z,1478887743.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:04.108Z,1478887744.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:04.516Z,1478887744.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:05.312Z,1478887745.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:05.746Z,1478887745.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:05.804Z,1478887745.804 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20161111T044527/Express0309.lzma
2016-11-11T18:09:05.886Z,1478887745.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:06.108Z,1478887746.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:06.257Z,1478887746.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:06.516Z,1478887746.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:07.273Z,1478887747.273 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0309.lzma.bak
2016-11-11T18:09:07.274Z,1478887747.274 [DataOverHttps](INFO): SBD MOMSN=4555641
2016-11-11T18:09:07.312Z,1478887747.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:07.343Z,1478887747.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:08.109Z,1478887748.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:08.477Z,1478887748.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:08.495Z,1478887748.495 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T18:09:08.495Z,1478887748.495 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T18:09:08.499Z,1478887748.499 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T18:09:08.584Z,1478887748.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:08.586Z,1478887748.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:09.380Z,1478887749.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:10.176Z,1478887750.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:10.940Z,1478887750.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:11.736Z,1478887751.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:12.163Z,1478887752.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:12.278Z,1478887752.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:12.532Z,1478887752.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:12.662Z,1478887752.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:12.940Z,1478887752.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:13.083Z,1478887753.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:13.437Z,1478887753.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:13.736Z,1478887753.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:13.845Z,1478887753.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:14.244Z,1478887754.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:14.460Z,1478887754.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:14.645Z,1478887754.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:15.045Z,1478887755.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:15.256Z,1478887755.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:15.453Z,1478887755.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:15.840Z,1478887755.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:16.052Z,1478887756.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:16.250Z,1478887756.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:16.460Z,1478887756.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:16.649Z,1478887756.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:17.049Z,1478887757.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:17.256Z,1478887757.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:17.447Z,1478887757.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:17.842Z,1478887757.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:18.052Z,1478887758.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:18.277Z,1478887758.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:18.460Z,1478887758.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:18.656Z,1478887758.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:19.034Z,1478887759.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:19.256Z,1478887759.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:19.435Z,1478887759.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:19.841Z,1478887759.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:20.052Z,1478887760.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:20.235Z,1478887760.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:20.460Z,1478887760.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:20.635Z,1478887760.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:21.045Z,1478887761.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:21.256Z,1478887761.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:21.439Z,1478887761.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:21.835Z,1478887761.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:22.052Z,1478887762.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:22.244Z,1478887762.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:22.532Z,1478887762.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:22.644Z,1478887762.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:23.036Z,1478887763.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:23.328Z,1478887763.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:23.442Z,1478887763.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:23.843Z,1478887763.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:24.125Z,1478887764.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:24.245Z,1478887764.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:24.643Z,1478887764.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:24.892Z,1478887764.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:25.076Z,1478887765.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:25.431Z,1478887765.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:25.689Z,1478887765.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:25.833Z,1478887765.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:26.265Z,1478887766.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:26.484Z,1478887766.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:26.633Z,1478887766.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:26.892Z,1478887766.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:27.069Z,1478887767.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:27.471Z,1478887767.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:27.688Z,1478887767.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:27.835Z,1478887767.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:28.241Z,1478887768.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:28.420Z,1478887768.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:28.634Z,1478887768.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:29.035Z,1478887769.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:29.216Z,1478887769.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:29.441Z,1478887769.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:29.835Z,1478887769.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:30.012Z,1478887770.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:30.242Z,1478887770.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:30.424Z,1478887770.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:30.644Z,1478887770.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:31.049Z,1478887771.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:31.220Z,1478887771.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:31.441Z,1478887771.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:31.845Z,1478887771.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:32.018Z,1478887772.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:32.243Z,1478887772.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:32.428Z,1478887772.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:32.638Z,1478887772.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:33.041Z,1478887773.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:33.224Z,1478887773.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:33.446Z,1478887773.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:33.836Z,1478887773.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:34.020Z,1478887774.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:34.242Z,1478887774.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:34.428Z,1478887774.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:34.645Z,1478887774.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:35.048Z,1478887775.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:35.224Z,1478887775.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:35.447Z,1478887775.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:35.848Z,1478887775.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:36.020Z,1478887776.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:36.249Z,1478887776.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:36.512Z,1478887776.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:36.633Z,1478887776.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:37.033Z,1478887777.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:37.308Z,1478887777.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:37.436Z,1478887777.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:37.841Z,1478887777.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:38.106Z,1478887778.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:38.239Z,1478887778.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:38.641Z,1478887778.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:38.872Z,1478887778.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:39.041Z,1478887779.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:39.469Z,1478887779.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:39.668Z,1478887779.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:39.873Z,1478887779.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:40.254Z,1478887780.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:40.464Z,1478887780.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:40.628Z,1478887780.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:40.872Z,1478887780.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:41.073Z,1478887781.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:41.431Z,1478887781.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:41.668Z,1478887781.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:41.854Z,1478887781.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:42.281Z,1478887782.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:42.396Z,1478887782.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:42.643Z,1478887782.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:43.037Z,1478887783.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:43.192Z,1478887783.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:43.437Z,1478887783.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:43.838Z,1478887783.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:43.989Z,1478887783.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:44.241Z,1478887784.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:44.396Z,1478887784.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:44.638Z,1478887784.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:45.041Z,1478887785.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:45.192Z,1478887785.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:45.436Z,1478887785.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:45.849Z,1478887785.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:45.988Z,1478887785.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:46.243Z,1478887786.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:46.396Z,1478887786.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:46.645Z,1478887786.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:47.043Z,1478887787.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:47.192Z,1478887787.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:47.444Z,1478887787.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:47.846Z,1478887787.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:47.988Z,1478887787.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:48.243Z,1478887788.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:48.396Z,1478887788.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:48.644Z,1478887788.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:49.045Z,1478887789.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:49.192Z,1478887789.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:49.444Z,1478887789.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:49.845Z,1478887789.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:49.988Z,1478887789.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:50.237Z,1478887790.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:50.488Z,1478887790.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:50.638Z,1478887790.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:51.049Z,1478887791.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:51.284Z,1478887791.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:51.441Z,1478887791.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:51.841Z,1478887791.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:52.080Z,1478887792.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:52.238Z,1478887792.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:52.769Z,1478887792.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:52.848Z,1478887792.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:53.037Z,1478887793.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:53.431Z,1478887793.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:53.644Z,1478887793.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:53.829Z,1478887793.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:54.281Z,1478887794.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:54.440Z,1478887794.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:54.633Z,1478887794.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:55.032Z,1478887795.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:55.236Z,1478887795.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:55.469Z,1478887795.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:55.832Z,1478887795.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:56.032Z,1478887796.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:56.258Z,1478887796.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:56.661Z,1478887796.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:56.828Z,1478887796.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:57.034Z,1478887797.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:57.434Z,1478887797.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:57.624Z,1478887797.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:57.832Z,1478887797.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:58.233Z,1478887798.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:58.420Z,1478887798.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:58.632Z,1478887798.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:59.033Z,1478887799.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:59.216Z,1478887799.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:09:59.431Z,1478887799.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:09:59.833Z,1478887799.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:00.012Z,1478887800.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:00.232Z,1478887800.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:00.640Z,1478887800.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:00.808Z,1478887800.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:01.037Z,1478887801.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:01.438Z,1478887801.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:01.628Z,1478887801.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:01.861Z,1478887801.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:02.232Z,1478887802.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:02.424Z,1478887802.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:02.628Z,1478887802.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:03.033Z,1478887803.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:03.220Z,1478887803.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:03.433Z,1478887803.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:03.837Z,1478887803.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:04.016Z,1478887804.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:04.228Z,1478887804.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:04.632Z,1478887804.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:04.812Z,1478887804.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:05.044Z,1478887805.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:05.437Z,1478887805.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:05.608Z,1478887805.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:05.831Z,1478887805.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:06.233Z,1478887806.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:06.407Z,1478887806.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:06.637Z,1478887806.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:07.033Z,1478887807.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:07.206Z,1478887807.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:07.432Z,1478887807.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:07.833Z,1478887807.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:07.000Z,1478887808.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:08.237Z,1478887808.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:08.673Z,1478887808.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:08.796Z,1478887808.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:09.037Z,1478887809.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:09.592Z,1478887809.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:10.388Z,1478887810.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:11.184Z,1478887811.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:11.772Z,1478887811.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:12.180Z,1478887812.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:12.588Z,1478887812.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:12.996Z,1478887812.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:13.404Z,1478887813.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:13.812Z,1478887813.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:14.137Z,1478887814.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:14.220Z,1478887814.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:14.307Z,1478887814.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:14.629Z,1478887814.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:14.682Z,1478887814.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:15.048Z,1478887815.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:15.077Z,1478887815.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:15.452Z,1478887815.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:15.456Z,1478887815.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:15.857Z,1478887815.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:15.864Z,1478887815.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:16.253Z,1478887816.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:16.376Z,1478887816.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:16.649Z,1478887816.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:17.047Z,1478887817.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:17.172Z,1478887817.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:17.461Z,1478887817.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:17.852Z,1478887817.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:17.968Z,1478887817.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:18.257Z,1478887818.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:18.452Z,1478887818.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:18.669Z,1478887818.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:19.063Z,1478887819.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:19.248Z,1478887819.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:19.463Z,1478887819.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:19.864Z,1478887819.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:20.044Z,1478887820.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:20.261Z,1478887820.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:20.655Z,1478887820.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:20.822Z,1478887820.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:21.052Z,1478887821.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:21.451Z,1478887821.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:21.616Z,1478887821.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:21.851Z,1478887821.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:22.254Z,1478887822.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:22.412Z,1478887822.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:22.657Z,1478887822.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:22.820Z,1478887822.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:23.056Z,1478887823.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:23.461Z,1478887823.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:23.616Z,1478887823.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:23.859Z,1478887823.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:24.261Z,1478887824.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:24.372Z,1478887824.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:24.669Z,1478887824.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:25.065Z,1478887825.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:25.168Z,1478887825.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:25.463Z,1478887825.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:25.922Z,1478887825.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:25.964Z,1478887825.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:26.285Z,1478887826.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:26.392Z,1478887826.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:26.651Z,1478887826.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:27.085Z,1478887827.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:27.188Z,1478887827.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:27.451Z,1478887827.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:27.850Z,1478887827.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:27.984Z,1478887827.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:28.288Z,1478887828.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:28.392Z,1478887828.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:28.649Z,1478887828.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:29.081Z,1478887829.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:29.188Z,1478887829.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:29.493Z,1478887829.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:29.848Z,1478887829.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:29.984Z,1478887829.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:30.268Z,1478887830.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:30.392Z,1478887830.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:30.661Z,1478887830.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:31.060Z,1478887831.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:31.188Z,1478887831.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:31.463Z,1478887831.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:31.868Z,1478887831.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:31.985Z,1478887831.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:32.264Z,1478887832.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:32.663Z,1478887832.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:32.780Z,1478887832.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:33.068Z,1478887833.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:33.428Z,1478887833.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:33.458Z,1478887833.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:33.861Z,1478887833.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:34.226Z,1478887834.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:34.256Z,1478887834.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:34.645Z,1478887834.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:34.800Z,1478887834.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:35.053Z,1478887835.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:35.453Z,1478887835.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:35.596Z,1478887835.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:35.852Z,1478887835.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:36.254Z,1478887836.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:36.392Z,1478887836.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:36.676Z,1478887836.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:36.800Z,1478887836.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:37.065Z,1478887837.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:37.464Z,1478887837.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:37.596Z,1478887837.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:37.894Z,1478887837.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:38.265Z,1478887838.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:38.360Z,1478887838.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:38.649Z,1478887838.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:39.077Z,1478887839.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:39.156Z,1478887839.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:39.447Z,1478887839.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:39.941Z,1478887839.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:39.952Z,1478887839.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:40.269Z,1478887840.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:40.360Z,1478887840.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:40.657Z,1478887840.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:41.068Z,1478887841.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:41.156Z,1478887841.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:41.469Z,1478887841.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:41.935Z,1478887841.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:41.952Z,1478887841.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:42.255Z,1478887842.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:42.360Z,1478887842.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:42.686Z,1478887842.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:43.058Z,1478887843.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:43.156Z,1478887843.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:43.484Z,1478887843.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:43.952Z,1478887843.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:43.982Z,1478887843.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:44.278Z,1478887844.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:44.360Z,1478887844.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:44.654Z,1478887844.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:45.057Z,1478887845.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:45.156Z,1478887845.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:45.464Z,1478887845.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:45.860Z,1478887845.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:45.953Z,1478887845.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:46.255Z,1478887846.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:46.404Z,1478887846.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:46.651Z,1478887846.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:47.059Z,1478887847.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:47.200Z,1478887847.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:47.464Z,1478887847.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:47.862Z,1478887847.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:47.996Z,1478887847.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:48.253Z,1478887848.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:48.643Z,1478887848.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:48.768Z,1478887848.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:49.045Z,1478887849.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:49.447Z,1478887849.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:49.564Z,1478887849.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:49.853Z,1478887849.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:50.253Z,1478887850.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:50.360Z,1478887850.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:50.655Z,1478887850.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:50.788Z,1478887850.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:51.068Z,1478887851.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:51.469Z,1478887851.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:51.585Z,1478887851.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:51.898Z,1478887851.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:52.282Z,1478887852.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:52.352Z,1478887852.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:52.654Z,1478887852.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:53.081Z,1478887853.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:53.148Z,1478887853.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:53.459Z,1478887853.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:53.897Z,1478887853.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:53.944Z,1478887853.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:54.312Z,1478887854.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:54.352Z,1478887854.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:54.664Z,1478887854.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:55.064Z,1478887855.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:55.148Z,1478887855.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:55.469Z,1478887855.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:55.944Z,1478887855.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:55.965Z,1478887855.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:56.273Z,1478887856.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:56.352Z,1478887856.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:56.653Z,1478887856.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:57.079Z,1478887857.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:57.148Z,1478887857.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:57.454Z,1478887857.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:57.942Z,1478887857.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:57.944Z,1478887857.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:58.258Z,1478887858.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:58.352Z,1478887858.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:58.694Z,1478887858.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:59.061Z,1478887859.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:59.148Z,1478887859.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:10:59.469Z,1478887859.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:59.856Z,1478887859.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:10:59.945Z,1478887859.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:00.247Z,1478887860.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:00.400Z,1478887860.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:00.649Z,1478887860.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:01.065Z,1478887861.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:01.196Z,1478887861.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:01.452Z,1478887861.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:01.849Z,1478887861.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:01.992Z,1478887861.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:02.261Z,1478887862.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:02.665Z,1478887862.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:02.756Z,1478887862.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:03.059Z,1478887863.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:03.464Z,1478887863.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:03.552Z,1478887863.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:03.864Z,1478887863.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:04.263Z,1478887864.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:04.348Z,1478887864.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:04.650Z,1478887864.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:04.772Z,1478887864.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:05.073Z,1478887865.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:05.468Z,1478887865.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:05.568Z,1478887865.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:05.886Z,1478887865.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:06.257Z,1478887866.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:06.336Z,1478887866.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:06.663Z,1478887866.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:07.054Z,1478887867.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:07.132Z,1478887867.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:07.473Z,1478887867.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:07.867Z,1478887867.867 [PNI_TCM](ERROR): CRC does not match. Expected:0x54561 got:0x59520
2016-11-11T18:11:07.901Z,1478887867.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:07.928Z,1478887867.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:08.263Z,1478887868.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:08.336Z,1478887868.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:08.670Z,1478887868.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:09.064Z,1478887869.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:09.132Z,1478887869.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:09.928Z,1478887869.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:10.336Z,1478887870.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:11.132Z,1478887871.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:11.928Z,1478887871.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:12.336Z,1478887872.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:12.481Z,1478887872.481 [PNI_TCM](ERROR): CRC does not match. Expected:0x56616 got:0x48990
2016-11-11T18:11:12.481Z,1478887872.481 [PNI_TCM](ERROR): CRC does not match. Expected:0x59873 got:0x48991
2016-11-11T18:11:12.481Z,1478887872.481 [PNI_TCM](ERROR): CRC does not match. Expected:0x34908 got:0x48991
2016-11-11T18:11:12.482Z,1478887872.482 [PNI_TCM](ERROR): CRC does not match. Expected:0x17634 got:0x48989
2016-11-11T18:11:12.482Z,1478887872.482 [PNI_TCM](ERROR): CRC does not match. Expected:0x38171 got:0x48991
2016-11-11T18:11:12.483Z,1478887872.483 [PNI_TCM](ERROR): CRC does not match. Expected:0x52873 got:0x48990
2016-11-11T18:11:12.483Z,1478887872.483 [PNI_TCM](ERROR): CRC does not match. Expected:0x10698 got:0x48991
2016-11-11T18:11:12.484Z,1478887872.484 [PNI_TCM](ERROR): CRC does not match. Expected:0x11668 got:0x48991
2016-11-11T18:11:12.569Z,1478887872.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:12.697Z,1478887872.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:13.101Z,1478887873.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:13.132Z,1478887873.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:13.460Z,1478887873.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:13.887Z,1478887873.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:13.928Z,1478887873.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:14.300Z,1478887874.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:14.388Z,1478887874.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:14.669Z,1478887874.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:15.069Z,1478887875.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:15.185Z,1478887875.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:15.472Z,1478887875.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:15.868Z,1478887875.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:15.980Z,1478887875.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:16.318Z,1478887876.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:16.665Z,1478887876.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:16.736Z,1478887876.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:17.069Z,1478887877.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:17.477Z,1478887877.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:17.532Z,1478887877.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:17.874Z,1478887877.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:18.311Z,1478887878.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:18.328Z,1478887878.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:18.664Z,1478887878.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:18.748Z,1478887878.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:19.069Z,1478887879.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:19.463Z,1478887879.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:19.544Z,1478887879.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:19.916Z,1478887879.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:20.263Z,1478887880.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:20.288Z,1478887880.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:20.673Z,1478887880.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:21.073Z,1478887881.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:21.084Z,1478887881.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:21.465Z,1478887881.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:21.880Z,1478887881.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:21.916Z,1478887881.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:22.277Z,1478887882.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:22.288Z,1478887882.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:22.676Z,1478887882.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:23.069Z,1478887883.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:23.084Z,1478887883.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:23.475Z,1478887883.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:23.880Z,1478887883.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:23.900Z,1478887883.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:24.260Z,1478887884.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:24.288Z,1478887884.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:24.656Z,1478887884.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:25.084Z,1478887885.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:25.113Z,1478887885.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:25.462Z,1478887885.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:25.880Z,1478887885.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:25.905Z,1478887885.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:26.262Z,1478887886.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:26.296Z,1478887886.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:26.689Z,1478887886.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:27.073Z,1478887887.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:27.092Z,1478887887.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:27.490Z,1478887887.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:27.864Z,1478887887.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:27.889Z,1478887887.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:28.285Z,1478887888.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:28.376Z,1478887888.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:28.697Z,1478887888.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:29.056Z,1478887889.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:29.172Z,1478887889.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:29.461Z,1478887889.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:29.861Z,1478887889.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:29.968Z,1478887889.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:30.332Z,1478887890.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:30.661Z,1478887890.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:30.748Z,1478887890.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:31.055Z,1478887891.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:31.463Z,1478887891.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:31.544Z,1478887891.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:31.859Z,1478887891.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:32.320Z,1478887892.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:32.340Z,1478887892.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:32.664Z,1478887892.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:32.748Z,1478887892.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:33.067Z,1478887893.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:33.469Z,1478887893.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:33.544Z,1478887893.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:33.899Z,1478887893.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:34.239Z,1478887894.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:34.273Z,1478887894.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:34.673Z,1478887894.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:35.036Z,1478887895.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:35.074Z,1478887895.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:35.475Z,1478887895.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:35.832Z,1478887895.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:35.901Z,1478887895.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:36.242Z,1478887896.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:36.282Z,1478887896.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:36.656Z,1478887896.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:37.037Z,1478887897.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:37.061Z,1478887897.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:37.457Z,1478887897.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:37.833Z,1478887897.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:37.870Z,1478887897.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:38.240Z,1478887898.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:38.268Z,1478887898.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:38.668Z,1478887898.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:39.036Z,1478887899.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:39.067Z,1478887899.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:39.463Z,1478887899.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:39.832Z,1478887899.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:39.913Z,1478887899.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:40.252Z,1478887900.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:40.277Z,1478887900.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:40.673Z,1478887900.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:41.049Z,1478887901.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:41.113Z,1478887901.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:41.461Z,1478887901.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:41.844Z,1478887901.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:41.915Z,1478887901.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:42.301Z,1478887902.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:42.352Z,1478887902.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:42.665Z,1478887902.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:43.101Z,1478887903.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:43.148Z,1478887903.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:43.498Z,1478887903.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:43.871Z,1478887903.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:43.944Z,1478887903.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:44.321Z,1478887904.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:44.664Z,1478887904.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:44.712Z,1478887904.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:45.068Z,1478887905.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:45.473Z,1478887905.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:45.508Z,1478887905.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:45.871Z,1478887905.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:46.304Z,1478887906.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:46.325Z,1478887906.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:46.676Z,1478887906.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:46.757Z,1478887906.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:47.076Z,1478887907.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:47.475Z,1478887907.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:47.552Z,1478887907.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:47.876Z,1478887907.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:48.204Z,1478887908.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:48.261Z,1478887908.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:48.665Z,1478887908.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:48.000Z,1478887909.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:49.066Z,1478887909.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:49.465Z,1478887909.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:49.797Z,1478887909.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:49.877Z,1478887909.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:50.204Z,1478887910.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:50.277Z,1478887910.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:50.673Z,1478887910.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:50.000Z,1478887911.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:51.068Z,1478887911.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:51.471Z,1478887911.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:51.797Z,1478887911.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:51.875Z,1478887911.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:52.208Z,1478887912.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:52.269Z,1478887912.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:52.681Z,1478887912.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:53.004Z,1478887913.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:53.081Z,1478887913.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:53.476Z,1478887913.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:53.800Z,1478887913.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:53.880Z,1478887913.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:54.212Z,1478887914.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:54.301Z,1478887914.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:54.720Z,1478887914.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:55.008Z,1478887915.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:55.094Z,1478887915.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:55.514Z,1478887915.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:55.804Z,1478887915.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:55.970Z,1478887915.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:56.289Z,1478887916.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:56.332Z,1478887916.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:56.690Z,1478887916.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:57.097Z,1478887917.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:57.128Z,1478887917.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:57.503Z,1478887917.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:57.912Z,1478887917.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:57.925Z,1478887917.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:58.305Z,1478887918.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:58.685Z,1478887918.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:58.720Z,1478887918.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:59.079Z,1478887919.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:59.128Z,1478887919.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:11:59.505Z,1478887919.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:59.894Z,1478887919.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:11:59.924Z,1478887919.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:00.298Z,1478887920.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:00.674Z,1478887920.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:00.732Z,1478887920.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:01.090Z,1478887921.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:01.140Z,1478887921.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:01.474Z,1478887921.474 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:01.474Z,1478887921.474 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 247
2016-11-11T18:12:01.474Z,1478887921.474 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:12:01.497Z,1478887921.497 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:01.498Z,1478887921.498 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 247
2016-11-11T18:12:01.498Z,1478887921.498 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:12:01.516Z,1478887921.516 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:01.516Z,1478887921.516 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 247
2016-11-11T18:12:01.516Z,1478887921.516 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:12:01.564Z,1478887921.564 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:12:01.564Z,1478887921.564 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:12:01.564Z,1478887921.564 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:12:01.936Z,1478887921.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:01.946Z,1478887921.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:12:01.946Z,1478887921.946 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 247
2016-11-11T18:12:01.947Z,1478887921.947 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:12:01.947Z,1478887921.947 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 247
2016-11-11T18:12:01.948Z,1478887921.948 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:12:01.948Z,1478887921.948 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 247
2016-11-11T18:12:02.256Z,1478887922.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:12:02.256Z,1478887922.256 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:12:02.257Z,1478887922.257 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:12:02.274Z,1478887922.274 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:12:02.274Z,1478887922.274 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:12:02.274Z,1478887922.274 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:12:02.275Z,1478887922.275 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:12:02.275Z,1478887922.275 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:12:02.276Z,1478887922.276 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:12:02.344Z,1478887922.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:02.670Z,1478887922.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:03.097Z,1478887923.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:03.140Z,1478887923.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:03.463Z,1478887923.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:03.905Z,1478887923.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:03.940Z,1478887923.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:04.273Z,1478887924.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:04.424Z,1478887924.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:04.693Z,1478887924.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:05.071Z,1478887925.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:05.220Z,1478887925.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:05.463Z,1478887925.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:05.889Z,1478887925.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:06.016Z,1478887926.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:06.278Z,1478887926.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:06.424Z,1478887926.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:06.715Z,1478887926.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:07.078Z,1478887927.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:07.220Z,1478887927.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:07.461Z,1478887927.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:07.863Z,1478887927.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:08.016Z,1478887928.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:08.342Z,1478887928.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:08.424Z,1478887928.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:08.678Z,1478887928.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:09.102Z,1478887929.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:09.220Z,1478887929.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:10.016Z,1478887930.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:10.424Z,1478887930.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:11.220Z,1478887931.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:12.016Z,1478887932.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:12.688Z,1478887932.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:13.484Z,1478887933.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:14.280Z,1478887934.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:14.688Z,1478887934.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:15.484Z,1478887935.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:16.192Z,1478887936.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:16.370Z,1478887936.370 [BPC1](ERROR): Failed to receive battery data
2016-11-11T18:12:16.370Z,1478887936.370 [BPC1] Communications Fault, FailCount= 1
2016-11-11T18:12:16.370Z,1478887936.370 [BPC1](ERROR): Communications Fault
2016-11-11T18:12:16.391Z,1478887936.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:16.497Z,1478887936.497 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T18:12:16.591Z,1478887936.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:16.980Z,1478887936.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:16.988Z,1478887936.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:17.362Z,1478887937.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:17.444Z,1478887937.444 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:12:17.444Z,1478887937.444 [BPC1] No Fault, FailCount= 1
2016-11-11T18:12:17.784Z,1478887937.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:17.897Z,1478887937.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:18.169Z,1478887938.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:18.232Z,1478887938.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:18.581Z,1478887938.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:18.967Z,1478887938.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:19.028Z,1478887939.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:19.384Z,1478887939.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:19.802Z,1478887939.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:19.824Z,1478887939.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:20.169Z,1478887940.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:20.276Z,1478887940.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:20.574Z,1478887940.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:20.962Z,1478887940.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:21.072Z,1478887941.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:21.356Z,1478887941.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:21.820Z,1478887941.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:21.868Z,1478887941.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:22.165Z,1478887942.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:22.284Z,1478887942.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:22.562Z,1478887942.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:22.942Z,1478887942.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:23.080Z,1478887943.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:23.382Z,1478887943.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:23.757Z,1478887943.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:23.876Z,1478887943.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:24.153Z,1478887944.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:24.292Z,1478887944.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:24.569Z,1478887944.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:24.970Z,1478887944.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:25.088Z,1478887945.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:25.370Z,1478887945.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:25.761Z,1478887945.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:25.885Z,1478887945.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:26.202Z,1478887946.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:26.566Z,1478887946.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:26.684Z,1478887946.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:26.993Z,1478887946.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:27.350Z,1478887947.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:27.480Z,1478887947.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:27.761Z,1478887947.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:28.254Z,1478887948.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:28.292Z,1478887948.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:28.562Z,1478887948.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:28.704Z,1478887948.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:28.968Z,1478887948.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:29.378Z,1478887949.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:29.500Z,1478887949.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:29.786Z,1478887949.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:30.173Z,1478887950.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:30.268Z,1478887950.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:30.609Z,1478887950.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:30.969Z,1478887950.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:31.064Z,1478887951.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:31.382Z,1478887951.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:31.750Z,1478887951.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:31.860Z,1478887951.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:32.171Z,1478887952.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:32.272Z,1478887952.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:32.585Z,1478887952.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:32.951Z,1478887952.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:33.069Z,1478887953.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:33.357Z,1478887953.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:33.771Z,1478887953.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:33.864Z,1478887953.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:34.157Z,1478887954.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:34.272Z,1478887954.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:34.550Z,1478887954.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:34.947Z,1478887954.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:35.068Z,1478887955.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:35.351Z,1478887955.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:35.766Z,1478887955.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:35.864Z,1478887955.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:36.161Z,1478887956.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:36.272Z,1478887956.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:36.591Z,1478887956.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:36.964Z,1478887956.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:37.068Z,1478887957.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:37.366Z,1478887957.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:37.794Z,1478887957.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:37.864Z,1478887957.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:38.150Z,1478887958.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:38.272Z,1478887958.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:38.547Z,1478887958.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:38.953Z,1478887958.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:39.068Z,1478887959.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:39.369Z,1478887959.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:39.763Z,1478887959.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:39.864Z,1478887959.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:40.193Z,1478887960.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:40.572Z,1478887960.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:40.636Z,1478887960.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:40.949Z,1478887960.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:41.389Z,1478887961.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:41.432Z,1478887961.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:41.747Z,1478887961.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:42.202Z,1478887962.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:42.228Z,1478887962.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:42.560Z,1478887962.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:42.636Z,1478887962.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:42.964Z,1478887962.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:43.359Z,1478887963.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:43.432Z,1478887963.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:43.774Z,1478887963.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:44.164Z,1478887964.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:44.169Z,1478887964.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:44.597Z,1478887964.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:44.949Z,1478887964.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:44.960Z,1478887964.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:45.389Z,1478887965.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:45.753Z,1478887965.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:45.756Z,1478887965.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:46.180Z,1478887966.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:46.182Z,1478887966.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:46.585Z,1478887966.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:46.953Z,1478887966.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:46.976Z,1478887966.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:47.351Z,1478887967.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:47.758Z,1478887967.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:47.792Z,1478887967.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:48.159Z,1478887968.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:48.200Z,1478887968.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:48.558Z,1478887968.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:48.996Z,1478887968.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:49.005Z,1478887969.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:49.363Z,1478887969.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:49.765Z,1478887969.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:49.792Z,1478887969.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:50.157Z,1478887970.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:50.200Z,1478887970.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:50.563Z,1478887970.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:50.961Z,1478887970.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:50.996Z,1478887970.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:51.362Z,1478887971.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:51.792Z,1478887971.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:51.825Z,1478887971.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:52.157Z,1478887972.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:52.224Z,1478887972.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:52.556Z,1478887972.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:52.949Z,1478887972.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:53.020Z,1478887973.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:53.363Z,1478887973.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:53.757Z,1478887973.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:53.816Z,1478887973.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:54.207Z,1478887974.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:54.566Z,1478887974.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:54.608Z,1478887974.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:54.962Z,1478887974.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:55.368Z,1478887975.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:55.404Z,1478887975.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:55.798Z,1478887975.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:56.191Z,1478887976.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:56.200Z,1478887976.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:56.551Z,1478887976.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:56.608Z,1478887976.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:56.947Z,1478887976.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:57.351Z,1478887977.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:57.404Z,1478887977.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:57.754Z,1478887977.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:58.092Z,1478887978.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:58.156Z,1478887978.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:58.609Z,1478887978.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:58.888Z,1478887978.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:58.957Z,1478887978.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:59.360Z,1478887979.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:12:59.684Z,1478887979.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:12:59.773Z,1478887979.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:00.096Z,1478887980.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:00.162Z,1478887980.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:00.574Z,1478887980.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:00.893Z,1478887980.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:00.977Z,1478887980.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:01.366Z,1478887981.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:01.688Z,1478887981.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:01.749Z,1478887981.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:02.096Z,1478887982.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:02.156Z,1478887982.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:02.571Z,1478887982.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:02.892Z,1478887982.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:02.946Z,1478887982.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:03.347Z,1478887983.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:03.688Z,1478887983.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:03.777Z,1478887983.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:04.096Z,1478887984.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:04.170Z,1478887984.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:04.547Z,1478887984.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:04.892Z,1478887984.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:04.955Z,1478887984.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:05.357Z,1478887985.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:05.688Z,1478887985.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:05.793Z,1478887985.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:06.164Z,1478887986.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:06.236Z,1478887986.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:06.567Z,1478887986.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:06.965Z,1478887986.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:07.032Z,1478887987.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:07.365Z,1478887987.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:07.745Z,1478887987.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:07.828Z,1478887987.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:08.190Z,1478887988.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:08.564Z,1478887988.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:08.576Z,1478887988.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:08.944Z,1478887988.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:09.349Z,1478887989.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:09.372Z,1478887989.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:10.168Z,1478887990.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:10.576Z,1478887990.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:11.372Z,1478887991.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:12.104Z,1478887992.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:12.900Z,1478887992.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:13.061Z,1478887993.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:13.177Z,1478887993.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:13.550Z,1478887993.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:13.696Z,1478887993.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:13.975Z,1478887993.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:14.104Z,1478887994.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:14.343Z,1478887994.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:14.777Z,1478887994.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:14.900Z,1478887994.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:15.177Z,1478887995.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:15.544Z,1478887995.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:15.696Z,1478887995.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:15.952Z,1478887995.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:16.104Z,1478887996.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:16.372Z,1478887996.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:16.761Z,1478887996.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:16.900Z,1478887996.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:17.145Z,1478887997.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:17.541Z,1478887997.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:17.696Z,1478887997.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:17.946Z,1478887997.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:18.104Z,1478887998.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:18.361Z,1478887998.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:18.754Z,1478887998.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:18.900Z,1478887998.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:19.136Z,1478887999.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:19.541Z,1478887999.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:19.706Z,1478887999.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:19.945Z,1478887999.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:20.164Z,1478888000.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:20.339Z,1478888000.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:20.743Z,1478888000.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:20.960Z,1478888000.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:21.143Z,1478888001.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:21.542Z,1478888001.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:21.756Z,1478888001.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:21.946Z,1478888001.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:22.343Z,1478888002.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:22.524Z,1478888002.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:22.743Z,1478888002.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:23.145Z,1478888003.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:23.320Z,1478888003.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:23.549Z,1478888003.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:23.948Z,1478888003.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:24.116Z,1478888004.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:24.352Z,1478888004.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:24.524Z,1478888004.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:24.764Z,1478888004.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:25.136Z,1478888005.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:25.320Z,1478888005.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:25.543Z,1478888005.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:25.961Z,1478888005.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:26.068Z,1478888006.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:26.336Z,1478888006.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:26.742Z,1478888006.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:26.864Z,1478888006.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:27.198Z,1478888007.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:27.544Z,1478888007.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:27.660Z,1478888007.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:27.960Z,1478888007.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:28.068Z,1478888008.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:28.390Z,1478888008.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:28.746Z,1478888008.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:28.864Z,1478888008.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:29.169Z,1478888009.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:29.566Z,1478888009.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:29.660Z,1478888009.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:29.949Z,1478888009.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:30.068Z,1478888010.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:30.349Z,1478888010.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:30.742Z,1478888010.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:30.864Z,1478888010.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:31.143Z,1478888011.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:31.557Z,1478888011.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:31.660Z,1478888011.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:31.942Z,1478888011.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:32.104Z,1478888012.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:32.343Z,1478888012.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:32.744Z,1478888012.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:32.900Z,1478888012.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:33.154Z,1478888013.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:33.541Z,1478888013.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:33.697Z,1478888013.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:33.964Z,1478888013.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:34.140Z,1478888014.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:34.343Z,1478888014.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:34.739Z,1478888014.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:34.936Z,1478888014.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:35.144Z,1478888015.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:35.549Z,1478888015.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:35.732Z,1478888015.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:35.947Z,1478888015.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:36.343Z,1478888016.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:36.500Z,1478888016.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:36.754Z,1478888016.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:37.146Z,1478888017.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:37.296Z,1478888017.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:37.554Z,1478888017.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:37.953Z,1478888017.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:38.093Z,1478888018.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:38.349Z,1478888018.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:38.504Z,1478888018.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:38.757Z,1478888018.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:39.156Z,1478888019.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:39.300Z,1478888019.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:39.556Z,1478888019.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:39.940Z,1478888019.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:40.060Z,1478888020.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:40.343Z,1478888020.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:40.742Z,1478888020.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:40.857Z,1478888020.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:41.144Z,1478888021.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:41.613Z,1478888021.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:41.652Z,1478888021.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:41.972Z,1478888021.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:42.084Z,1478888022.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:42.349Z,1478888022.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:42.756Z,1478888022.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:42.880Z,1478888022.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:43.171Z,1478888023.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:43.586Z,1478888023.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:43.676Z,1478888023.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:43.972Z,1478888023.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:44.084Z,1478888024.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:44.369Z,1478888024.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:44.753Z,1478888024.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:44.880Z,1478888024.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:45.144Z,1478888025.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:45.544Z,1478888025.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:45.676Z,1478888025.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:45.953Z,1478888025.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:46.084Z,1478888026.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:46.354Z,1478888026.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:46.754Z,1478888026.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:46.880Z,1478888026.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:47.154Z,1478888027.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:47.555Z,1478888027.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:47.677Z,1478888027.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:47.952Z,1478888027.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:48.120Z,1478888028.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:48.360Z,1478888028.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:48.756Z,1478888028.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:48.916Z,1478888028.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:49.145Z,1478888029.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:49.553Z,1478888029.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:49.712Z,1478888029.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:49.938Z,1478888029.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:50.344Z,1478888030.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:50.484Z,1478888030.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:50.746Z,1478888030.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:51.156Z,1478888031.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:51.280Z,1478888031.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:51.548Z,1478888031.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:51.953Z,1478888031.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:52.076Z,1478888032.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:52.364Z,1478888032.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:52.492Z,1478888032.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:52.748Z,1478888032.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:53.153Z,1478888033.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:53.288Z,1478888033.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:53.605Z,1478888033.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:53.946Z,1478888033.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:54.040Z,1478888034.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:54.360Z,1478888034.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:54.757Z,1478888034.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:54.836Z,1478888034.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:55.154Z,1478888035.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:55.529Z,1478888035.529 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T18:13:55.529Z,1478888035.529 [BPC1] Data Fault, FailCount= 1
2016-11-11T18:13:55.529Z,1478888035.529 [BPC1](ERROR): Data Fault
2016-11-11T18:13:55.586Z,1478888035.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:55.632Z,1478888035.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:55.662Z,1478888035.662 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T18:13:55.957Z,1478888035.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:56.056Z,1478888036.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:56.377Z,1478888036.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:56.749Z,1478888036.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:56.789Z,1478888036.789 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:13:56.789Z,1478888036.789 [BPC1] No Fault, FailCount= 1
2016-11-11T18:13:56.852Z,1478888036.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:57.197Z,1478888037.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:57.626Z,1478888037.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:57.648Z,1478888037.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:57.961Z,1478888037.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:58.056Z,1478888038.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:58.347Z,1478888038.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:58.754Z,1478888038.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:58.852Z,1478888038.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:59.153Z,1478888039.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:59.596Z,1478888039.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:13:59.648Z,1478888039.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:13:59.962Z,1478888039.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:00.056Z,1478888040.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:00.349Z,1478888040.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:00.752Z,1478888040.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:00.852Z,1478888040.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:01.154Z,1478888041.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:01.549Z,1478888041.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:01.649Z,1478888041.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:01.943Z,1478888041.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:02.100Z,1478888042.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:02.348Z,1478888042.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:02.749Z,1478888042.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:02.896Z,1478888042.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:03.157Z,1478888043.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:03.549Z,1478888043.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:03.694Z,1478888043.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:03.963Z,1478888043.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:04.347Z,1478888044.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:04.480Z,1478888044.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:04.764Z,1478888044.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:05.154Z,1478888045.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:05.277Z,1478888045.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:05.555Z,1478888045.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:05.957Z,1478888045.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:06.072Z,1478888046.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:06.363Z,1478888046.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:06.500Z,1478888046.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:06.751Z,1478888046.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:07.150Z,1478888047.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:07.296Z,1478888047.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:07.618Z,1478888047.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:07.965Z,1478888047.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:08.012Z,1478888048.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:08.341Z,1478888048.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:08.743Z,1478888048.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:08.776Z,1478888048.776 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T18:14:08.776Z,1478888048.776 [Default:CheckIn:C.Wait] Stopped
2016-11-11T18:14:08.776Z,1478888048.776 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T18:14:08.776Z,1478888048.776 [Default:CheckIn:D] Running Loop=1
2016-11-11T18:14:08.810Z,1478888048.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:09.146Z,1478888049.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:09.171Z,1478888049.171 [Default:CheckIn:D] Stopped
2016-11-11T18:14:09.171Z,1478888049.171 [Default:CheckIn:E] Running Loop=1
2016-11-11T18:14:09.604Z,1478888049.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:09.673Z,1478888049.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:09.691Z,1478888049.691 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 804.130729 min 
2016-11-11T18:14:09.695Z,1478888049.695 [Default:CheckIn:E] Stopped
2016-11-11T18:14:09.695Z,1478888049.695 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T18:14:09.695Z,1478888049.695 [Default:CheckIn] Stopped
2016-11-11T18:14:09.696Z,1478888049.696 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T18:14:09.696Z,1478888049.696 [Default:CheckIn](INFO): Running loop #78
2016-11-11T18:14:09.696Z,1478888049.696 [Default:CheckIn] Running Loop=78
2016-11-11T18:14:09.696Z,1478888049.696 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T18:14:09.696Z,1478888049.696 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T18:14:10.012Z,1478888050.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:10.808Z,1478888050.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:11.604Z,1478888051.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:12.012Z,1478888052.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:12.810Z,1478888052.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:12.893Z,1478888052.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:12.965Z,1478888052.965 [NAL9602](INFO): Powering up
2016-11-11T18:14:13.013Z,1478888053.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:13.402Z,1478888053.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:13.604Z,1478888053.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:13.778Z,1478888053.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:14.016Z,1478888054.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:14.200Z,1478888054.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:14.564Z,1478888054.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:14.812Z,1478888054.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:14.986Z,1478888054.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:15.370Z,1478888055.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:15.624Z,1478888055.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:15.771Z,1478888055.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:16.072Z,1478888056.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:16.174Z,1478888056.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:16.566Z,1478888056.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:16.868Z,1478888056.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:16.973Z,1478888056.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:17.381Z,1478888057.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:17.664Z,1478888057.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:17.770Z,1478888057.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:18.176Z,1478888058.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:18.436Z,1478888058.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:18.572Z,1478888058.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:18.972Z,1478888058.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:19.232Z,1478888059.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:19.376Z,1478888059.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:19.776Z,1478888059.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:20.028Z,1478888060.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:20.168Z,1478888060.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:20.436Z,1478888060.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:20.580Z,1478888060.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:20.956Z,1478888060.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:21.232Z,1478888061.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:21.356Z,1478888061.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:21.757Z,1478888061.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:21.956Z,1478888061.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:22.173Z,1478888062.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:22.563Z,1478888062.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:22.752Z,1478888062.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:22.972Z,1478888062.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:23.373Z,1478888063.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:23.548Z,1478888063.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:23.777Z,1478888063.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:23.968Z,1478888063.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:24.125Z,1478888064.125 [NAL9602](INFO): NAL9602 initialized
2016-11-11T18:14:24.175Z,1478888064.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:24.565Z,1478888064.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:24.764Z,1478888064.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:24.925Z,1478888064.925 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T18:14:24.925Z,1478888064.925 [NAL9602] Data Fault, FailCount= 1
2016-11-11T18:14:24.925Z,1478888064.925 [NAL9602](ERROR): Data Fault
2016-11-11T18:14:24.978Z,1478888064.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:25.017Z,1478888065.017 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T18:14:25.325Z,1478888065.325 [NAL9602](INFO): Powering down
2016-11-11T18:14:25.371Z,1478888065.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:25.560Z,1478888065.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:25.774Z,1478888065.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:25.968Z,1478888065.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:26.166Z,1478888066.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:26.186Z,1478888066.186 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T18:14:26.186Z,1478888066.186 [NAL9602] No Fault, FailCount= 1
2016-11-11T18:14:26.593Z,1478888066.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:26.766Z,1478888066.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:26.981Z,1478888066.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:27.364Z,1478888067.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:27.560Z,1478888067.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:27.801Z,1478888067.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:27.968Z,1478888067.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:28.169Z,1478888068.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:28.602Z,1478888068.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:28.764Z,1478888068.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:28.995Z,1478888068.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:29.374Z,1478888069.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:29.561Z,1478888069.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:29.780Z,1478888069.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:30.052Z,1478888070.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:30.169Z,1478888070.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:30.525Z,1478888070.525 [NAL9602](INFO): Powering up NAL9602
2016-11-11T18:14:30.577Z,1478888070.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:30.850Z,1478888070.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:30.969Z,1478888070.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:31.373Z,1478888071.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:31.644Z,1478888071.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:31.773Z,1478888071.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:32.169Z,1478888072.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:32.410Z,1478888072.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:32.573Z,1478888072.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:32.965Z,1478888072.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:33.204Z,1478888073.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:33.389Z,1478888073.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:33.774Z,1478888073.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:33.000Z,1478888074.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:34.176Z,1478888074.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:34.416Z,1478888074.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:34.580Z,1478888074.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:34.982Z,1478888074.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:35.212Z,1478888075.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:35.386Z,1478888075.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:35.780Z,1478888075.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:35.932Z,1478888075.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:36.160Z,1478888076.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:36.563Z,1478888076.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:36.728Z,1478888076.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:36.973Z,1478888076.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:37.362Z,1478888077.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:37.525Z,1478888077.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:37.773Z,1478888077.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:37.932Z,1478888077.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:38.171Z,1478888078.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:38.577Z,1478888078.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:38.728Z,1478888078.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:38.973Z,1478888078.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:39.366Z,1478888079.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:39.524Z,1478888079.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:39.772Z,1478888079.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:39.932Z,1478888079.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:40.173Z,1478888080.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:40.593Z,1478888080.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:40.728Z,1478888080.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:41.001Z,1478888081.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:41.325Z,1478888081.325 [NAL9602](INFO): NAL9602 initialized
2016-11-11T18:14:41.385Z,1478888081.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:41.524Z,1478888081.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:41.781Z,1478888081.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:41.932Z,1478888081.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:42.209Z,1478888082.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:42.585Z,1478888082.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:42.728Z,1478888082.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:43.009Z,1478888083.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:43.393Z,1478888083.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:43.524Z,1478888083.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:43.783Z,1478888083.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:44.028Z,1478888084.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:44.158Z,1478888084.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:44.579Z,1478888084.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:44.824Z,1478888084.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:44.965Z,1478888084.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:45.361Z,1478888085.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:45.620Z,1478888085.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:45.769Z,1478888085.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:46.164Z,1478888086.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:46.388Z,1478888086.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:46.577Z,1478888086.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:46.973Z,1478888086.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:47.184Z,1478888087.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:47.373Z,1478888087.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:47.773Z,1478888087.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:47.980Z,1478888087.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:48.172Z,1478888088.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:48.388Z,1478888088.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:48.573Z,1478888088.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:48.967Z,1478888088.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:49.184Z,1478888089.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:49.412Z,1478888089.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:49.775Z,1478888089.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:49.948Z,1478888089.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:50.160Z,1478888090.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:50.565Z,1478888090.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:50.744Z,1478888090.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:50.964Z,1478888090.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:51.368Z,1478888091.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:51.540Z,1478888091.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:51.773Z,1478888091.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:51.948Z,1478888091.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:52.173Z,1478888092.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:52.569Z,1478888092.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:52.744Z,1478888092.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:52.977Z,1478888092.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:53.377Z,1478888093.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:53.540Z,1478888093.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:53.785Z,1478888093.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:53.948Z,1478888093.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:54.187Z,1478888094.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:54.559Z,1478888094.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:54.744Z,1478888094.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:54.964Z,1478888094.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:55.413Z,1478888095.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:55.540Z,1478888095.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:55.782Z,1478888095.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:55.948Z,1478888095.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:56.164Z,1478888096.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:56.589Z,1478888096.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:56.744Z,1478888096.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:56.983Z,1478888096.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:57.389Z,1478888097.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:57.546Z,1478888097.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:57.797Z,1478888097.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:58.004Z,1478888098.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:58.189Z,1478888098.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:58.589Z,1478888098.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:58.800Z,1478888098.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:58.981Z,1478888098.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:59.361Z,1478888099.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:14:59.596Z,1478888099.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:14:59.785Z,1478888099.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:00.173Z,1478888100.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:00.364Z,1478888100.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:00.563Z,1478888100.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:00.965Z,1478888100.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:01.160Z,1478888101.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:01.368Z,1478888101.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:01.769Z,1478888101.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:01.956Z,1478888101.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:02.166Z,1478888102.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:02.364Z,1478888102.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:02.581Z,1478888102.581 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:02.581Z,1478888102.581 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 248
2016-11-11T18:15:02.581Z,1478888102.582 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:15:02.604Z,1478888102.604 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:02.604Z,1478888102.605 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 248
2016-11-11T18:15:02.604Z,1478888102.605 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:15:02.607Z,1478888102.607 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:02.607Z,1478888102.607 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 248
2016-11-11T18:15:02.607Z,1478888102.607 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:15:02.638Z,1478888102.638 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:15:02.638Z,1478888102.638 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:15:02.638Z,1478888102.638 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:15:02.997Z,1478888102.997 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:15:02.997Z,1478888102.997 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 248
2016-11-11T18:15:02.998Z,1478888102.998 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:15:02.998Z,1478888102.998 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 248
2016-11-11T18:15:02.999Z,1478888102.999 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:15:02.999Z,1478888102.999 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 248
2016-11-11T18:15:03.160Z,1478888103.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:03.363Z,1478888103.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:15:03.364Z,1478888103.364 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:15:03.364Z,1478888103.364 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:15:03.369Z,1478888103.369 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:15:03.369Z,1478888103.369 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:15:03.370Z,1478888103.370 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:15:03.370Z,1478888103.370 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:15:03.370Z,1478888103.371 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:15:03.371Z,1478888103.371 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:15:03.785Z,1478888103.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:03.904Z,1478888103.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:04.169Z,1478888104.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:04.563Z,1478888104.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:04.700Z,1478888104.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:04.969Z,1478888104.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:05.373Z,1478888105.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:05.496Z,1478888105.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:05.781Z,1478888105.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:05.928Z,1478888105.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:06.169Z,1478888106.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:06.569Z,1478888106.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:06.724Z,1478888106.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:06.977Z,1478888106.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:07.377Z,1478888107.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:07.520Z,1478888107.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:07.769Z,1478888107.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:07.928Z,1478888107.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:08.161Z,1478888108.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:08.561Z,1478888108.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:08.724Z,1478888108.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:08.986Z,1478888108.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:09.387Z,1478888109.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:09.520Z,1478888109.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:09.827Z,1478888109.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:09.928Z,1478888109.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:10.724Z,1478888110.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:11.521Z,1478888111.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:11.000Z,1478888112.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:12.796Z,1478888112.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:13.161Z,1478888113.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:13.287Z,1478888113.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:13.592Z,1478888113.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:13.677Z,1478888113.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:14.066Z,1478888114.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:14.345Z,1478888114.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:14.473Z,1478888114.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:14.867Z,1478888114.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:15.140Z,1478888115.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:15.239Z,1478888115.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:15.642Z,1478888115.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:15.936Z,1478888115.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:16.041Z,1478888116.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:16.344Z,1478888116.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:16.450Z,1478888116.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:16.845Z,1478888116.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:17.140Z,1478888117.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:17.242Z,1478888117.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:17.648Z,1478888117.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:17.868Z,1478888117.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:18.050Z,1478888118.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:18.452Z,1478888118.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:18.664Z,1478888118.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:18.850Z,1478888118.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:19.246Z,1478888119.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:19.461Z,1478888119.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:19.648Z,1478888119.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:19.872Z,1478888119.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:20.049Z,1478888120.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:20.427Z,1478888120.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:20.668Z,1478888120.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:20.850Z,1478888120.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:21.261Z,1478888121.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:21.464Z,1478888121.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:21.665Z,1478888121.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:21.880Z,1478888121.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:22.033Z,1478888122.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:22.435Z,1478888122.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:22.676Z,1478888122.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:22.869Z,1478888122.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:23.245Z,1478888123.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:23.472Z,1478888123.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:23.644Z,1478888123.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:23.880Z,1478888123.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:24.049Z,1478888124.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:24.447Z,1478888124.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:24.676Z,1478888124.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:24.877Z,1478888124.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:25.237Z,1478888125.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:25.472Z,1478888125.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:25.646Z,1478888125.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:25.964Z,1478888125.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:26.058Z,1478888126.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:26.525Z,1478888126.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:26.760Z,1478888126.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:26.901Z,1478888126.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:27.257Z,1478888127.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:27.556Z,1478888127.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:27.665Z,1478888127.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:28.051Z,1478888128.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:28.320Z,1478888128.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:28.473Z,1478888128.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:28.869Z,1478888128.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:29.116Z,1478888129.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:29.230Z,1478888129.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:29.637Z,1478888129.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:29.912Z,1478888129.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:30.041Z,1478888130.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:30.332Z,1478888130.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:30.433Z,1478888130.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:30.834Z,1478888130.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:31.128Z,1478888131.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:31.241Z,1478888131.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:31.642Z,1478888131.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:31.848Z,1478888131.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:32.049Z,1478888132.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:32.445Z,1478888132.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:32.644Z,1478888132.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:32.838Z,1478888132.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:33.249Z,1478888133.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:33.441Z,1478888133.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:33.652Z,1478888133.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:33.848Z,1478888133.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:34.026Z,1478888134.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:34.457Z,1478888134.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:34.644Z,1478888134.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:34.827Z,1478888134.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:35.234Z,1478888135.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:35.441Z,1478888135.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:35.658Z,1478888135.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:35.852Z,1478888135.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:36.059Z,1478888136.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:36.434Z,1478888136.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:36.648Z,1478888136.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:36.834Z,1478888136.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:37.237Z,1478888137.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:37.444Z,1478888137.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:37.671Z,1478888137.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:37.852Z,1478888137.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:38.049Z,1478888138.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:38.437Z,1478888138.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:38.648Z,1478888138.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:38.842Z,1478888138.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:39.238Z,1478888139.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:39.444Z,1478888139.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:39.649Z,1478888139.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:39.940Z,1478888139.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:40.056Z,1478888140.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:40.453Z,1478888140.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:40.736Z,1478888140.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:40.877Z,1478888140.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:41.277Z,1478888141.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:41.532Z,1478888141.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:41.670Z,1478888141.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:42.073Z,1478888142.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:42.304Z,1478888142.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:42.458Z,1478888142.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:42.874Z,1478888142.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:43.101Z,1478888143.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:43.293Z,1478888143.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:43.648Z,1478888143.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:43.896Z,1478888143.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:44.045Z,1478888144.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:44.304Z,1478888144.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:44.446Z,1478888144.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:44.845Z,1478888144.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:45.100Z,1478888145.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:45.246Z,1478888145.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:45.641Z,1478888145.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:45.828Z,1478888145.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:46.042Z,1478888146.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:46.437Z,1478888146.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:46.624Z,1478888146.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:46.845Z,1478888146.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:47.244Z,1478888147.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:47.420Z,1478888147.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:47.654Z,1478888147.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:47.828Z,1478888147.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:48.046Z,1478888148.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:48.453Z,1478888148.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:48.626Z,1478888148.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:48.849Z,1478888148.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:49.238Z,1478888149.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:49.420Z,1478888149.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:49.649Z,1478888149.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:49.828Z,1478888149.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:50.026Z,1478888150.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:50.442Z,1478888150.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:50.624Z,1478888150.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:50.834Z,1478888150.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:51.235Z,1478888151.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:51.420Z,1478888151.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:51.636Z,1478888151.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:51.828Z,1478888151.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:52.045Z,1478888152.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:52.438Z,1478888152.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:52.624Z,1478888152.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:52.841Z,1478888152.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:53.245Z,1478888153.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:53.422Z,1478888153.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:53.656Z,1478888153.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:53.921Z,1478888153.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:54.043Z,1478888154.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:54.466Z,1478888154.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:54.716Z,1478888154.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:54.865Z,1478888154.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:55.277Z,1478888155.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:55.512Z,1478888155.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:55.647Z,1478888155.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:56.082Z,1478888156.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:56.280Z,1478888156.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:56.451Z,1478888156.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:56.865Z,1478888156.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:57.076Z,1478888157.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:57.273Z,1478888157.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:57.638Z,1478888157.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:57.872Z,1478888157.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:58.064Z,1478888158.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:58.280Z,1478888158.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:58.477Z,1478888158.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:58.831Z,1478888158.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:59.076Z,1478888159.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:15:59.245Z,1478888159.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:59.653Z,1478888159.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:15:59.804Z,1478888159.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:00.066Z,1478888160.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:00.447Z,1478888160.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:00.600Z,1478888160.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:00.846Z,1478888160.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:01.245Z,1478888161.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:01.397Z,1478888161.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:01.649Z,1478888161.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:01.808Z,1478888161.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:02.049Z,1478888162.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:02.426Z,1478888162.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:02.604Z,1478888162.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:02.843Z,1478888162.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:03.259Z,1478888163.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:03.400Z,1478888163.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:03.645Z,1478888163.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:03.808Z,1478888163.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:04.037Z,1478888164.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:04.440Z,1478888164.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:04.604Z,1478888164.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:04.839Z,1478888164.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:05.241Z,1478888165.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:05.400Z,1478888165.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:05.646Z,1478888165.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:05.808Z,1478888165.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:06.040Z,1478888166.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:06.437Z,1478888166.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:06.604Z,1478888166.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:06.837Z,1478888166.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:07.245Z,1478888167.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:07.400Z,1478888167.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:07.643Z,1478888167.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:07.896Z,1478888167.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:08.040Z,1478888168.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:08.445Z,1478888168.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:08.465Z,1478888168.465 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T18:16:08.692Z,1478888168.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:08.858Z,1478888168.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:09.282Z,1478888169.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:09.488Z,1478888169.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:09.643Z,1478888169.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:10.090Z,1478888170.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:10.256Z,1478888170.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:11.052Z,1478888171.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:11.849Z,1478888171.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:12.264Z,1478888172.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:13.060Z,1478888173.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:13.654Z,1478888173.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:13.796Z,1478888173.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:13.802Z,1478888173.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:14.167Z,1478888174.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:14.529Z,1478888174.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:14.592Z,1478888174.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:14.929Z,1478888174.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:15.286Z,1478888175.286 [NAL9602](INFO): SBD MO Status=2, MOMSN=355, MT Status=2, MTMSN=0
2016-11-11T18:16:15.286Z,1478888175.286 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T18:16:15.388Z,1478888175.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:15.393Z,1478888175.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:15.756Z,1478888175.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:15.824Z,1478888175.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:16.126Z,1478888176.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:16.530Z,1478888176.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:16.620Z,1478888176.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:16.932Z,1478888176.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:17.375Z,1478888177.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:17.416Z,1478888177.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:17.734Z,1478888177.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:17.824Z,1478888177.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:18.124Z,1478888178.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:18.536Z,1478888178.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:18.620Z,1478888178.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:18.928Z,1478888178.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:19.387Z,1478888179.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:19.416Z,1478888179.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:19.745Z,1478888179.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:19.824Z,1478888179.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:20.130Z,1478888180.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:20.537Z,1478888180.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:20.620Z,1478888180.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:20.938Z,1478888180.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:21.335Z,1478888181.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:21.422Z,1478888181.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:21.744Z,1478888181.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:21.882Z,1478888181.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:22.125Z,1478888182.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:22.529Z,1478888182.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:22.676Z,1478888182.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:22.938Z,1478888182.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:23.334Z,1478888183.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:23.472Z,1478888183.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:23.734Z,1478888183.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:24.139Z,1478888184.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:24.260Z,1478888184.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:24.537Z,1478888184.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:24.933Z,1478888184.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:25.056Z,1478888185.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:25.320Z,1478888185.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:25.726Z,1478888185.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:25.852Z,1478888185.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:26.169Z,1478888186.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:26.260Z,1478888186.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:26.566Z,1478888186.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:26.929Z,1478888186.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:27.056Z,1478888187.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:27.389Z,1478888187.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:27.757Z,1478888187.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:27.852Z,1478888187.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:28.145Z,1478888188.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:28.260Z,1478888188.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:28.561Z,1478888188.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:28.957Z,1478888188.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:29.056Z,1478888189.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:29.405Z,1478888189.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:29.745Z,1478888189.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:29.804Z,1478888189.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:30.149Z,1478888190.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:30.547Z,1478888190.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:30.600Z,1478888190.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:30.931Z,1478888190.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:31.373Z,1478888191.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:31.396Z,1478888191.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:31.732Z,1478888191.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:31.804Z,1478888191.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:32.144Z,1478888192.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:32.537Z,1478888192.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:32.600Z,1478888192.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:32.890Z,1478888192.890 [NAL9602](INFO): SBD MO Status=2, MOMSN=355, MT Status=2, MTMSN=0
2016-11-11T18:16:32.890Z,1478888192.890 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T18:16:32.934Z,1478888192.934 [PNI_TCM](ERROR): CRC does not match. Expected:0x44727 got:0x49147
2016-11-11T18:16:32.961Z,1478888192.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:33.386Z,1478888193.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:33.396Z,1478888193.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:33.750Z,1478888193.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:33.804Z,1478888193.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:34.118Z,1478888194.118 [PNI_TCM](ERROR): CRC does not match. Expected:0x46072 got:0x49579
2016-11-11T18:16:34.178Z,1478888194.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:34.543Z,1478888194.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:34.600Z,1478888194.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:34.953Z,1478888194.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:35.327Z,1478888195.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:35.397Z,1478888195.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:35.738Z,1478888195.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:35.868Z,1478888195.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:36.134Z,1478888196.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:36.553Z,1478888196.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:36.664Z,1478888196.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:36.959Z,1478888196.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:37.337Z,1478888197.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:37.460Z,1478888197.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:37.728Z,1478888197.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:38.137Z,1478888198.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:38.244Z,1478888198.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:38.540Z,1478888198.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:38.937Z,1478888198.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:39.040Z,1478888199.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:39.330Z,1478888199.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:39.735Z,1478888199.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:39.836Z,1478888199.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:40.143Z,1478888200.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:40.248Z,1478888200.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:40.526Z,1478888200.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:40.966Z,1478888200.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:41.044Z,1478888201.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:41.412Z,1478888201.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:41.754Z,1478888201.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:41.800Z,1478888201.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:42.147Z,1478888202.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:42.561Z,1478888202.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:42.596Z,1478888202.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:42.969Z,1478888202.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:43.330Z,1478888203.330 [PNI_TCM](ERROR): CRC does not match. Expected:0x58570 got:0x43858
2016-11-11T18:16:43.382Z,1478888203.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:43.392Z,1478888203.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:43.726Z,1478888203.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:43.828Z,1478888203.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:44.134Z,1478888204.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:44.534Z,1478888204.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:44.624Z,1478888204.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:44.918Z,1478888204.918 [PNI_TCM](ERROR): CRC does not match. Expected:0x48689 got:0x16871
2016-11-11T18:16:44.945Z,1478888204.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:45.377Z,1478888205.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:45.420Z,1478888205.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:45.732Z,1478888205.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:45.828Z,1478888205.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:46.139Z,1478888206.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:46.537Z,1478888206.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:46.624Z,1478888206.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:46.937Z,1478888206.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:47.350Z,1478888207.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:47.421Z,1478888207.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:47.740Z,1478888207.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:47.828Z,1478888207.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:48.113Z,1478888208.114 [PNI_TCM](ERROR): CRC does not match. Expected:0x14971 got:0x7361
2016-11-11T18:16:48.155Z,1478888208.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:48.557Z,1478888208.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:48.624Z,1478888208.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:48.929Z,1478888208.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:49.327Z,1478888209.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:49.421Z,1478888209.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:49.730Z,1478888209.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:49.856Z,1478888209.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:50.133Z,1478888210.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:50.533Z,1478888210.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:50.652Z,1478888210.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:50.928Z,1478888210.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:51.327Z,1478888211.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:51.448Z,1478888211.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:51.788Z,1478888211.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:52.124Z,1478888212.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:52.220Z,1478888212.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:52.521Z,1478888212.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:52.929Z,1478888212.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:53.016Z,1478888213.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:53.333Z,1478888213.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:53.783Z,1478888213.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:53.812Z,1478888213.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:54.127Z,1478888214.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:54.220Z,1478888214.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:54.528Z,1478888214.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:54.970Z,1478888214.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:55.016Z,1478888215.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:55.349Z,1478888215.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:55.749Z,1478888215.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:55.776Z,1478888215.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:56.140Z,1478888216.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:56.550Z,1478888216.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:56.572Z,1478888216.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:57.009Z,1478888217.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:57.362Z,1478888217.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:57.368Z,1478888217.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:57.744Z,1478888217.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:57.828Z,1478888217.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:58.162Z,1478888218.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:58.537Z,1478888218.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:58.624Z,1478888218.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:58.978Z,1478888218.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:59.390Z,1478888219.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:59.420Z,1478888219.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:16:59.737Z,1478888219.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:16:59.828Z,1478888219.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:00.090Z,1478888220.090 [NAL9602](INFO): SBD MO Status=0, MOMSN=355, MT Status=0, MTMSN=0
2016-11-11T18:17:00.090Z,1478888220.090 [NAL9602](INFO): No messages in MT queue
2016-11-11T18:17:00.161Z,1478888220.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:00.545Z,1478888220.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:00.624Z,1478888220.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:00.938Z,1478888220.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:01.374Z,1478888221.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:01.420Z,1478888221.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:01.742Z,1478888221.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:01.828Z,1478888221.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:02.132Z,1478888222.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:02.532Z,1478888222.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:02.624Z,1478888222.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:02.934Z,1478888222.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:03.340Z,1478888223.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:03.420Z,1478888223.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:03.731Z,1478888223.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:03.840Z,1478888223.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:04.135Z,1478888224.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:04.537Z,1478888224.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:04.636Z,1478888224.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:05.012Z,1478888225.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:05.331Z,1478888225.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:05.432Z,1478888225.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:05.816Z,1478888225.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:06.146Z,1478888226.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:06.228Z,1478888226.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:06.538Z,1478888226.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:06.636Z,1478888226.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:06.965Z,1478888226.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:07.348Z,1478888227.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:07.432Z,1478888227.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:07.801Z,1478888227.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:08.181Z,1478888228.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:08.232Z,1478888228.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:08.529Z,1478888228.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:08.974Z,1478888228.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:09.028Z,1478888229.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:09.380Z,1478888229.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:09.752Z,1478888229.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:09.774Z,1478888229.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:10.158Z,1478888230.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:10.548Z,1478888230.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:11.344Z,1478888231.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:11.752Z,1478888231.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:12.548Z,1478888232.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:13.344Z,1478888233.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:13.752Z,1478888233.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:14.548Z,1478888234.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:15.344Z,1478888235.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:15.752Z,1478888235.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:15.806Z,1478888235.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:16.036Z,1478888236.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:16.365Z,1478888236.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:16.548Z,1478888236.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:16.784Z,1478888236.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:17.184Z,1478888237.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:17.345Z,1478888237.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:17.590Z,1478888237.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:17.804Z,1478888237.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:17.988Z,1478888237.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:18.366Z,1478888238.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:18.600Z,1478888238.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:18.785Z,1478888238.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:19.184Z,1478888239.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:19.396Z,1478888239.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:19.598Z,1478888239.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:20.021Z,1478888240.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:20.188Z,1478888240.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:20.387Z,1478888240.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:20.790Z,1478888240.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:20.984Z,1478888240.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:21.190Z,1478888241.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:21.629Z,1478888241.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:21.780Z,1478888241.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:21.978Z,1478888241.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:22.200Z,1478888242.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:22.378Z,1478888242.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:22.765Z,1478888242.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:22.996Z,1478888242.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:23.164Z,1478888243.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:23.588Z,1478888243.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:23.724Z,1478888243.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:23.998Z,1478888243.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:24.378Z,1478888244.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:24.520Z,1478888244.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:24.773Z,1478888244.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:25.176Z,1478888245.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:25.316Z,1478888245.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:25.566Z,1478888245.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:25.724Z,1478888245.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:25.962Z,1478888245.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:26.379Z,1478888246.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:26.520Z,1478888246.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:26.838Z,1478888246.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:27.204Z,1478888247.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:27.316Z,1478888247.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:27.596Z,1478888247.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:27.741Z,1478888247.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:28.018Z,1478888248.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:28.366Z,1478888248.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:28.536Z,1478888248.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:28.785Z,1478888248.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:29.169Z,1478888249.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:29.332Z,1478888249.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:29.590Z,1478888249.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:29.740Z,1478888249.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:29.991Z,1478888249.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:30.384Z,1478888250.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:30.536Z,1478888250.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:30.788Z,1478888250.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:31.194Z,1478888251.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:31.333Z,1478888251.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:31.566Z,1478888251.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:31.788Z,1478888251.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:31.976Z,1478888251.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:32.363Z,1478888252.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:32.584Z,1478888252.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:32.810Z,1478888252.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:33.240Z,1478888253.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:33.380Z,1478888253.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:33.578Z,1478888253.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:33.958Z,1478888253.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:34.144Z,1478888254.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:34.353Z,1478888254.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:34.752Z,1478888254.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:34.940Z,1478888254.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:35.155Z,1478888255.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:35.569Z,1478888255.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:35.736Z,1478888255.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:35.966Z,1478888255.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:36.144Z,1478888256.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:36.398Z,1478888256.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:36.768Z,1478888256.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:36.942Z,1478888256.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:37.164Z,1478888257.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:37.557Z,1478888257.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:37.688Z,1478888257.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:37.964Z,1478888257.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:38.364Z,1478888258.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:38.486Z,1478888258.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:38.768Z,1478888258.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:39.203Z,1478888259.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:39.280Z,1478888259.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:39.588Z,1478888259.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:39.704Z,1478888259.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:39.956Z,1478888259.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:40.352Z,1478888260.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:40.500Z,1478888260.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:40.801Z,1478888260.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:41.157Z,1478888261.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:41.296Z,1478888261.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:41.580Z,1478888261.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:41.704Z,1478888261.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:41.994Z,1478888261.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:42.371Z,1478888262.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:42.500Z,1478888262.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:42.757Z,1478888262.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:43.203Z,1478888263.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:43.296Z,1478888263.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:43.557Z,1478888263.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:43.704Z,1478888263.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:44.010Z,1478888264.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:44.382Z,1478888264.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:44.502Z,1478888264.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:44.774Z,1478888264.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:45.170Z,1478888265.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:45.297Z,1478888265.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:45.571Z,1478888265.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:45.748Z,1478888265.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:45.950Z,1478888265.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:46.373Z,1478888266.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:46.544Z,1478888266.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:46.749Z,1478888266.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:47.150Z,1478888267.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:47.340Z,1478888267.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:47.563Z,1478888267.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:47.969Z,1478888267.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:48.112Z,1478888268.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:48.362Z,1478888268.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:48.765Z,1478888268.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:48.908Z,1478888268.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:49.161Z,1478888269.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:49.704Z,1478888269.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:49.719Z,1478888269.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:49.969Z,1478888269.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:50.168Z,1478888270.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:50.367Z,1478888270.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:50.767Z,1478888270.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:50.964Z,1478888270.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:51.228Z,1478888271.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:51.569Z,1478888271.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:51.652Z,1478888271.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:51.957Z,1478888271.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:52.360Z,1478888272.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:52.448Z,1478888272.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:52.765Z,1478888272.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:53.203Z,1478888273.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:53.248Z,1478888273.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:53.549Z,1478888273.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:53.664Z,1478888273.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:53.953Z,1478888273.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:54.384Z,1478888274.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:54.460Z,1478888274.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:54.759Z,1478888274.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:55.256Z,1478888275.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:55.266Z,1478888275.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:55.560Z,1478888275.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:55.664Z,1478888275.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:55.966Z,1478888275.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:56.363Z,1478888276.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:56.460Z,1478888276.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:56.803Z,1478888276.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:57.226Z,1478888277.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:57.256Z,1478888277.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:57.609Z,1478888277.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:57.664Z,1478888277.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:57.969Z,1478888277.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:58.389Z,1478888278.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:58.460Z,1478888278.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:58.785Z,1478888278.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:59.150Z,1478888279.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:59.257Z,1478888279.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:17:59.563Z,1478888279.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:17:59.974Z,1478888279.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:00.052Z,1478888280.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:00.363Z,1478888280.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:00.648Z,1478888280.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:00.763Z,1478888280.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:01.164Z,1478888281.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:01.444Z,1478888281.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:01.554Z,1478888281.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:01.960Z,1478888281.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:02.100Z,1478888282.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:02.370Z,1478888282.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:02.766Z,1478888282.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:02.896Z,1478888282.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:03.166Z,1478888283.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:03.569Z,1478888283.569 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:03.569Z,1478888283.569 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 249
2016-11-11T18:18:03.570Z,1478888283.569 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:18:03.576Z,1478888283.576 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:03.576Z,1478888283.576 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 249
2016-11-11T18:18:03.576Z,1478888283.576 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:18:03.578Z,1478888283.578 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:03.578Z,1478888283.578 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 249
2016-11-11T18:18:03.578Z,1478888283.578 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:18:03.629Z,1478888283.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:18:03.630Z,1478888283.630 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:18:03.630Z,1478888283.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:18:03.692Z,1478888283.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:04.008Z,1478888284.008 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:18:04.009Z,1478888284.009 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 249
2016-11-11T18:18:04.009Z,1478888284.009 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:18:04.009Z,1478888284.009 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 249
2016-11-11T18:18:04.010Z,1478888284.010 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:18:04.010Z,1478888284.010 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 249
2016-11-11T18:18:04.100Z,1478888284.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:04.354Z,1478888284.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:18:04.354Z,1478888284.354 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:18:04.354Z,1478888284.354 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:18:04.359Z,1478888284.359 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:18:04.360Z,1478888284.360 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:18:04.360Z,1478888284.360 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:18:04.361Z,1478888284.361 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:18:04.361Z,1478888284.361 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:18:04.361Z,1478888284.362 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:18:04.765Z,1478888284.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:04.896Z,1478888284.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:05.211Z,1478888285.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:05.577Z,1478888285.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:05.648Z,1478888285.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:05.973Z,1478888285.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:06.363Z,1478888286.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:06.444Z,1478888286.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:06.781Z,1478888286.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:07.227Z,1478888287.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:07.240Z,1478888287.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:07.571Z,1478888287.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:07.648Z,1478888287.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:07.953Z,1478888287.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:08.380Z,1478888288.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:08.444Z,1478888288.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:08.776Z,1478888288.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:09.240Z,1478888289.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:09.250Z,1478888289.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:09.559Z,1478888289.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:09.664Z,1478888289.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:09.963Z,1478888289.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:10.363Z,1478888290.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:10.460Z,1478888290.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:11.256Z,1478888291.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:11.664Z,1478888291.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:12.460Z,1478888292.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:13.257Z,1478888293.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:13.724Z,1478888293.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:13.908Z,1478888293.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:14.051Z,1478888294.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:14.409Z,1478888294.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:14.520Z,1478888294.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:14.830Z,1478888294.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:15.205Z,1478888295.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:15.316Z,1478888295.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:15.690Z,1478888295.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:16.042Z,1478888296.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:16.088Z,1478888296.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:16.418Z,1478888296.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:16.797Z,1478888296.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:16.884Z,1478888296.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:17.199Z,1478888297.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:17.680Z,1478888297.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:17.684Z,1478888297.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:18.005Z,1478888298.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:18.100Z,1478888298.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:18.413Z,1478888298.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:18.807Z,1478888298.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:18.896Z,1478888298.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:19.232Z,1478888299.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:19.612Z,1478888299.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:19.644Z,1478888299.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:20.008Z,1478888300.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:20.412Z,1478888300.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:20.440Z,1478888300.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:20.804Z,1478888300.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:21.216Z,1478888301.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:21.244Z,1478888301.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:21.619Z,1478888301.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:21.652Z,1478888301.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:22.020Z,1478888302.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:22.409Z,1478888302.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:22.448Z,1478888302.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:22.803Z,1478888302.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:23.244Z,1478888303.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:23.252Z,1478888303.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:23.610Z,1478888303.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:23.652Z,1478888303.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:24.009Z,1478888304.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:24.418Z,1478888304.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:24.448Z,1478888304.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:24.815Z,1478888304.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:25.227Z,1478888305.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:25.252Z,1478888305.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:25.617Z,1478888305.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:25.660Z,1478888305.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:26.025Z,1478888306.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:26.401Z,1478888306.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:26.456Z,1478888306.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:26.842Z,1478888306.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:27.200Z,1478888307.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:27.252Z,1478888307.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:27.618Z,1478888307.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:27.744Z,1478888307.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:28.034Z,1478888308.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:28.414Z,1478888308.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:28.540Z,1478888308.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:28.833Z,1478888308.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:29.222Z,1478888309.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:29.336Z,1478888309.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:29.671Z,1478888309.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:30.041Z,1478888310.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:30.096Z,1478888310.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:30.426Z,1478888310.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:30.821Z,1478888310.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:30.892Z,1478888310.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:31.203Z,1478888311.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:31.649Z,1478888311.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:31.688Z,1478888311.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:32.008Z,1478888312.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:32.399Z,1478888312.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:32.484Z,1478888312.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:32.801Z,1478888312.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:32.892Z,1478888312.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:33.238Z,1478888313.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:33.568Z,1478888313.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:33.617Z,1478888313.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:34.013Z,1478888314.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:34.364Z,1478888314.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:34.420Z,1478888314.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:34.802Z,1478888314.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:35.160Z,1478888315.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:35.231Z,1478888315.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:35.576Z,1478888315.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:35.613Z,1478888315.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:36.012Z,1478888316.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:36.372Z,1478888316.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:36.426Z,1478888316.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:36.818Z,1478888316.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:37.168Z,1478888317.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:37.227Z,1478888317.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:37.576Z,1478888317.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:37.598Z,1478888317.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:38.001Z,1478888318.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:38.372Z,1478888318.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:38.405Z,1478888318.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:38.802Z,1478888318.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:39.169Z,1478888319.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:39.221Z,1478888319.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:39.580Z,1478888319.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:39.620Z,1478888319.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:40.027Z,1478888320.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:40.376Z,1478888320.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:40.441Z,1478888320.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:40.816Z,1478888320.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:41.172Z,1478888321.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:41.274Z,1478888321.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:41.609Z,1478888321.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:41.728Z,1478888321.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:42.007Z,1478888322.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:42.450Z,1478888322.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:42.524Z,1478888322.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:42.815Z,1478888322.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:43.219Z,1478888323.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:43.320Z,1478888323.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:43.645Z,1478888323.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:43.995Z,1478888323.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:44.068Z,1478888324.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:44.426Z,1478888324.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:44.818Z,1478888324.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:44.864Z,1478888324.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:45.198Z,1478888325.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:45.644Z,1478888325.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:45.668Z,1478888325.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:46.031Z,1478888326.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:46.078Z,1478888326.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:46.403Z,1478888326.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:46.803Z,1478888326.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:46.872Z,1478888326.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:47.200Z,1478888327.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:47.536Z,1478888327.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:47.607Z,1478888327.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:48.003Z,1478888328.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:48.332Z,1478888328.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:48.416Z,1478888328.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:48.815Z,1478888328.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:49.128Z,1478888329.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:49.217Z,1478888329.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:49.540Z,1478888329.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:49.605Z,1478888329.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:50.002Z,1478888330.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:50.338Z,1478888330.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:50.421Z,1478888330.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:50.793Z,1478888330.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:51.132Z,1478888331.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:51.217Z,1478888331.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:51.540Z,1478888331.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:51.624Z,1478888331.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:52.027Z,1478888332.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:52.336Z,1478888332.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:52.429Z,1478888332.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:52.797Z,1478888332.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:53.132Z,1478888333.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:53.229Z,1478888333.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:53.540Z,1478888333.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:53.604Z,1478888333.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:54.004Z,1478888334.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:54.336Z,1478888334.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:54.414Z,1478888334.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:54.807Z,1478888334.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:55.132Z,1478888335.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:55.258Z,1478888335.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:55.629Z,1478888335.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:55.672Z,1478888335.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:56.008Z,1478888336.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:56.409Z,1478888336.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:56.468Z,1478888336.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:56.840Z,1478888336.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:57.217Z,1478888337.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:57.264Z,1478888337.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:57.672Z,1478888337.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:58.014Z,1478888338.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:58.048Z,1478888338.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:58.437Z,1478888338.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:58.837Z,1478888338.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:58.844Z,1478888338.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:18:59.201Z,1478888339.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:59.631Z,1478888339.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:18:59.640Z,1478888339.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:00.009Z,1478888340.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:00.048Z,1478888340.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:00.425Z,1478888340.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:00.815Z,1478888340.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:00.844Z,1478888340.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:01.210Z,1478888341.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:01.516Z,1478888341.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:01.613Z,1478888341.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:02.013Z,1478888342.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:02.312Z,1478888342.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:02.412Z,1478888342.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:02.821Z,1478888342.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:03.108Z,1478888343.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:03.212Z,1478888343.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:03.516Z,1478888343.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:03.618Z,1478888343.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:04.034Z,1478888344.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:04.312Z,1478888344.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:04.421Z,1478888344.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:04.797Z,1478888344.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:05.109Z,1478888345.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:05.217Z,1478888345.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:05.520Z,1478888345.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:05.605Z,1478888345.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:06.009Z,1478888346.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:06.316Z,1478888346.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:06.417Z,1478888346.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:06.814Z,1478888346.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:07.112Z,1478888347.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:07.210Z,1478888347.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:07.520Z,1478888347.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:07.613Z,1478888347.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:08.005Z,1478888348.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:08.316Z,1478888348.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:08.411Z,1478888348.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:08.813Z,1478888348.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:09.112Z,1478888349.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:09.252Z,1478888349.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:09.603Z,1478888349.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:09.652Z,1478888349.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:10.013Z,1478888350.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:10.046Z,1478888350.046 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T18:14:09.7Z
2016-11-11T18:19:10.046Z,1478888350.046 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T18:19:10.047Z,1478888350.046 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T18:19:10.413Z,1478888350.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:10.448Z,1478888350.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:11.244Z,1478888351.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:11.976Z,1478888351.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:12.772Z,1478888352.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:13.568Z,1478888353.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:13.976Z,1478888353.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:14.609Z,1478888354.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:14.669Z,1478888354.669 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0312.lzma
2016-11-11T18:19:14.762Z,1478888354.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:14.772Z,1478888354.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:15.137Z,1478888355.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:15.466Z,1478888355.466 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0312.lzma.bak
2016-11-11T18:19:15.466Z,1478888355.466 [DataOverHttps](INFO): SBD MOMSN=4555646
2016-11-11T18:19:15.532Z,1478888355.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:15.535Z,1478888355.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:16.328Z,1478888356.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:16.848Z,1478888356.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:17.049Z,1478888357.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:17.124Z,1478888357.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:17.532Z,1478888357.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:18.328Z,1478888358.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:19.124Z,1478888359.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:19.532Z,1478888359.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:20.222Z,1478888360.222 [NAL9602](INFO): Powering down
2016-11-11T18:19:20.314Z,1478888360.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:20.328Z,1478888360.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:20.452Z,1478888360.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:20.793Z,1478888360.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:21.124Z,1478888361.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:21.202Z,1478888361.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:21.532Z,1478888361.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:21.589Z,1478888361.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:21.991Z,1478888361.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:22.328Z,1478888362.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:23.127Z,1478888363.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:23.588Z,1478888363.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:24.384Z,1478888364.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:25.180Z,1478888365.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:25.321Z,1478888365.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:25.395Z,1478888365.395 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20161111T044527/Express0313.lzma
2016-11-11T18:19:25.487Z,1478888365.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:25.853Z,1478888365.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:25.964Z,1478888365.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:26.198Z,1478888366.197 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0313.lzma.bak
2016-11-11T18:19:26.198Z,1478888366.198 [DataOverHttps](INFO): SBD MOMSN=4555648
2016-11-11T18:19:26.254Z,1478888366.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:26.760Z,1478888366.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:27.556Z,1478888367.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:27.790Z,1478888367.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:27.800Z,1478888367.800 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T18:19:27.800Z,1478888367.800 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T18:19:27.800Z,1478888367.800 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T18:19:27.925Z,1478888367.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:27.964Z,1478888367.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:28.760Z,1478888368.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:29.473Z,1478888369.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:30.268Z,1478888370.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:31.064Z,1478888371.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:31.396Z,1478888371.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:31.484Z,1478888371.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:31.526Z,1478888371.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:31.870Z,1478888371.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:32.280Z,1478888372.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:32.341Z,1478888372.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:32.672Z,1478888372.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:33.076Z,1478888373.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:33.082Z,1478888373.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:33.496Z,1478888373.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:33.499Z,1478888373.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:33.874Z,1478888373.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:34.292Z,1478888374.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:34.322Z,1478888374.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:34.699Z,1478888374.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:35.086Z,1478888375.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:35.088Z,1478888375.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:35.481Z,1478888375.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:35.496Z,1478888375.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:35.889Z,1478888375.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:36.268Z,1478888376.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:36.292Z,1478888376.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:36.671Z,1478888376.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:37.069Z,1478888377.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:37.096Z,1478888377.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:37.472Z,1478888377.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:37.576Z,1478888377.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:37.877Z,1478888377.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:38.284Z,1478888378.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:38.372Z,1478888378.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:38.675Z,1478888378.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:39.083Z,1478888379.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:39.168Z,1478888379.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:39.554Z,1478888379.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:39.864Z,1478888379.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:39.940Z,1478888379.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:40.266Z,1478888380.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:40.673Z,1478888380.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:40.736Z,1478888380.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:41.068Z,1478888381.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:41.540Z,1478888381.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:41.561Z,1478888381.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:41.876Z,1478888381.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:41.948Z,1478888381.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:42.272Z,1478888382.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:42.680Z,1478888382.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:42.745Z,1478888382.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:43.077Z,1478888383.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:43.480Z,1478888383.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:43.540Z,1478888383.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:43.886Z,1478888383.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:44.289Z,1478888384.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:44.336Z,1478888384.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:44.684Z,1478888384.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:45.069Z,1478888385.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:45.132Z,1478888385.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:45.473Z,1478888385.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:45.928Z,1478888385.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:45.945Z,1478888385.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:46.273Z,1478888386.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:46.686Z,1478888386.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:46.724Z,1478888386.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:47.069Z,1478888387.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:47.497Z,1478888387.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:47.520Z,1478888387.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:47.869Z,1478888387.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:48.301Z,1478888388.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:48.316Z,1478888388.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:48.701Z,1478888388.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:49.068Z,1478888389.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:49.112Z,1478888389.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:49.509Z,1478888389.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:49.873Z,1478888389.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:49.908Z,1478888389.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:50.268Z,1478888390.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:50.665Z,1478888390.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:50.704Z,1478888390.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:51.077Z,1478888391.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:51.469Z,1478888391.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:51.500Z,1478888391.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:51.868Z,1478888391.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:52.269Z,1478888392.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:52.296Z,1478888392.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:52.668Z,1478888392.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:53.064Z,1478888393.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:53.092Z,1478888393.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:53.479Z,1478888393.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:53.869Z,1478888393.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:53.888Z,1478888393.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:54.268Z,1478888394.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:54.684Z,1478888394.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:54.690Z,1478888394.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:55.068Z,1478888395.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:55.479Z,1478888395.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:55.480Z,1478888395.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:55.869Z,1478888395.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:56.273Z,1478888396.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:56.276Z,1478888396.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:56.672Z,1478888396.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:57.072Z,1478888397.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:57.074Z,1478888397.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:57.469Z,1478888397.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:57.868Z,1478888397.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:57.874Z,1478888397.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:58.276Z,1478888398.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:58.664Z,1478888398.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:58.669Z,1478888398.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:59.109Z,1478888399.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:59.460Z,1478888399.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:19:59.493Z,1478888399.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:19:59.866Z,1478888399.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:00.256Z,1478888400.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:00.269Z,1478888400.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:00.693Z,1478888400.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:01.052Z,1478888401.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:01.073Z,1478888401.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:01.468Z,1478888401.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:01.850Z,1478888401.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:01.901Z,1478888401.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:02.268Z,1478888402.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:02.645Z,1478888402.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:02.714Z,1478888402.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:03.110Z,1478888403.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:03.184Z,1478888403.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:03.474Z,1478888403.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:03.592Z,1478888403.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:03.878Z,1478888403.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:03.000Z,1478888404.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:04.273Z,1478888404.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:04.408Z,1478888404.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:04.673Z,1478888404.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:04.816Z,1478888404.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:05.140Z,1478888405.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:05.224Z,1478888405.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:05.470Z,1478888405.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:05.632Z,1478888405.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:05.870Z,1478888405.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:06.040Z,1478888406.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:06.269Z,1478888406.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:06.448Z,1478888406.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:06.674Z,1478888406.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:06.856Z,1478888406.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:07.069Z,1478888407.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:07.264Z,1478888407.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:07.490Z,1478888407.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:07.672Z,1478888407.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:07.881Z,1478888407.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:08.084Z,1478888408.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:08.269Z,1478888408.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:08.667Z,1478888408.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:08.880Z,1478888408.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:09.076Z,1478888409.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:09.504Z,1478888409.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:09.678Z,1478888409.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:09.876Z,1478888409.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:10.088Z,1478888410.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:10.279Z,1478888410.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:10.674Z,1478888410.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:10.884Z,1478888410.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:11.090Z,1478888411.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:11.388Z,1478888411.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:11.477Z,1478888411.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:11.882Z,1478888411.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:12.184Z,1478888412.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:12.274Z,1478888412.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:12.674Z,1478888412.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:12.980Z,1478888412.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:13.089Z,1478888413.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:13.388Z,1478888413.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:13.480Z,1478888413.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:13.901Z,1478888413.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:14.184Z,1478888414.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:14.257Z,1478888414.257 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T18:20:14.257Z,1478888414.257 [BPC1] Data Fault, FailCount= 1
2016-11-11T18:20:14.257Z,1478888414.257 [BPC1](ERROR): Data Fault
2016-11-11T18:20:14.266Z,1478888414.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:14.322Z,1478888414.322 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T18:20:14.672Z,1478888414.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:14.980Z,1478888414.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:15.101Z,1478888415.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:15.392Z,1478888415.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:15.473Z,1478888415.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:15.516Z,1478888415.516 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:20:15.517Z,1478888415.517 [BPC1] No Fault, FailCount= 1
2016-11-11T18:20:15.925Z,1478888415.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:16.188Z,1478888416.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:16.308Z,1478888416.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:16.673Z,1478888416.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:16.984Z,1478888416.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:17.079Z,1478888417.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:17.392Z,1478888417.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:17.481Z,1478888417.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:17.873Z,1478888417.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:18.188Z,1478888418.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:18.273Z,1478888418.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:18.673Z,1478888418.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:18.984Z,1478888418.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:19.108Z,1478888419.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:19.484Z,1478888419.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:19.532Z,1478888419.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:19.879Z,1478888419.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:20.292Z,1478888420.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:20.328Z,1478888420.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:20.664Z,1478888420.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:21.069Z,1478888421.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:21.124Z,1478888421.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:21.507Z,1478888421.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:21.867Z,1478888421.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:21.888Z,1478888421.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:22.277Z,1478888422.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:22.671Z,1478888422.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:22.692Z,1478888422.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:23.070Z,1478888423.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:23.479Z,1478888423.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:23.488Z,1478888423.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:23.881Z,1478888423.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:23.912Z,1478888423.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:24.275Z,1478888424.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:24.677Z,1478888424.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:24.708Z,1478888424.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:25.085Z,1478888425.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:25.368Z,1478888425.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:25.473Z,1478888425.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:25.881Z,1478888425.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:26.164Z,1478888426.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:26.281Z,1478888426.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:26.697Z,1478888426.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:26.961Z,1478888426.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:27.079Z,1478888427.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:27.372Z,1478888427.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:27.489Z,1478888427.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:27.880Z,1478888427.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:28.168Z,1478888428.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:28.283Z,1478888428.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:28.964Z,1478888428.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:29.384Z,1478888429.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:30.180Z,1478888430.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:30.976Z,1478888430.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:31.384Z,1478888431.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:31.710Z,1478888431.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:31.825Z,1478888431.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:32.180Z,1478888432.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:32.237Z,1478888432.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:32.661Z,1478888432.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:33.022Z,1478888433.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:33.110Z,1478888433.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:33.462Z,1478888433.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:33.504Z,1478888433.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:33.827Z,1478888433.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:34.261Z,1478888434.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:34.308Z,1478888434.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:34.632Z,1478888434.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:35.033Z,1478888435.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:35.104Z,1478888435.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:35.466Z,1478888435.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:35.829Z,1478888435.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:35.864Z,1478888435.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:36.234Z,1478888436.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:36.633Z,1478888436.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:36.660Z,1478888436.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:37.036Z,1478888437.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:37.449Z,1478888437.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:37.456Z,1478888437.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:37.836Z,1478888437.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:37.904Z,1478888437.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:38.236Z,1478888438.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:38.636Z,1478888438.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:38.700Z,1478888438.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:39.033Z,1478888439.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:39.352Z,1478888439.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:39.441Z,1478888439.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:39.821Z,1478888439.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:40.148Z,1478888440.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:40.221Z,1478888440.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:40.620Z,1478888440.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:40.944Z,1478888440.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:41.050Z,1478888441.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:41.352Z,1478888441.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:41.429Z,1478888441.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:41.829Z,1478888441.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:42.149Z,1478888442.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:42.233Z,1478888442.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:42.628Z,1478888442.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:42.944Z,1478888442.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:43.032Z,1478888443.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:43.352Z,1478888443.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:43.433Z,1478888443.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:43.825Z,1478888443.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:44.148Z,1478888444.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:44.224Z,1478888444.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:44.659Z,1478888444.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:44.944Z,1478888444.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:45.032Z,1478888445.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:45.352Z,1478888445.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:45.436Z,1478888445.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:45.858Z,1478888445.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:46.148Z,1478888446.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:46.224Z,1478888446.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:46.646Z,1478888446.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:46.944Z,1478888446.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:47.061Z,1478888447.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:47.457Z,1478888447.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:47.488Z,1478888447.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:47.857Z,1478888447.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:48.229Z,1478888448.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:48.284Z,1478888448.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:48.637Z,1478888448.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:49.033Z,1478888449.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:49.080Z,1478888449.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:49.449Z,1478888449.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:49.828Z,1478888449.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:49.848Z,1478888449.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:50.232Z,1478888450.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:50.636Z,1478888450.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:50.644Z,1478888450.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:51.032Z,1478888451.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:51.440Z,1478888451.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:51.452Z,1478888451.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:51.836Z,1478888451.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:51.848Z,1478888451.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:52.232Z,1478888452.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:52.643Z,1478888452.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:52.644Z,1478888452.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:53.025Z,1478888453.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:53.334Z,1478888453.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:53.428Z,1478888453.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:53.819Z,1478888453.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:54.128Z,1478888454.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:54.222Z,1478888454.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:54.623Z,1478888454.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:54.924Z,1478888454.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:55.023Z,1478888455.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:55.336Z,1478888455.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:55.429Z,1478888455.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:55.824Z,1478888455.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:56.132Z,1478888456.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:56.232Z,1478888456.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:56.633Z,1478888456.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:56.928Z,1478888456.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:57.032Z,1478888457.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:57.336Z,1478888457.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:57.424Z,1478888457.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:57.834Z,1478888457.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:58.132Z,1478888458.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:58.226Z,1478888458.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:58.653Z,1478888458.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:58.928Z,1478888458.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:59.049Z,1478888459.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:59.336Z,1478888459.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:20:59.436Z,1478888459.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:20:59.860Z,1478888459.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:00.132Z,1478888460.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:00.243Z,1478888460.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:00.616Z,1478888460.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:00.928Z,1478888460.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:01.070Z,1478888461.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:01.423Z,1478888461.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:01.456Z,1478888461.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:01.857Z,1478888461.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:02.242Z,1478888462.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:02.252Z,1478888462.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:02.633Z,1478888462.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:03.024Z,1478888463.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:03.048Z,1478888463.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:03.435Z,1478888463.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:03.776Z,1478888463.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:03.839Z,1478888463.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:04.226Z,1478888464.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:04.572Z,1478888464.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:04.635Z,1478888464.635 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:04.636Z,1478888464.635 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 250
2016-11-11T18:21:04.636Z,1478888464.636 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:21:04.642Z,1478888464.642 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:04.642Z,1478888464.642 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 250
2016-11-11T18:21:04.642Z,1478888464.642 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:21:04.644Z,1478888464.644 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:04.644Z,1478888464.644 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 250
2016-11-11T18:21:04.644Z,1478888464.644 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:21:04.678Z,1478888464.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:21:04.678Z,1478888464.678 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:21:04.678Z,1478888464.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:21:05.104Z,1478888465.104 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:21:05.105Z,1478888465.105 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 250
2016-11-11T18:21:05.105Z,1478888465.105 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:21:05.105Z,1478888465.105 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 250
2016-11-11T18:21:05.106Z,1478888465.106 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:21:05.106Z,1478888465.106 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 250
2016-11-11T18:21:05.369Z,1478888465.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:05.428Z,1478888465.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:21:05.428Z,1478888465.428 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:21:05.429Z,1478888465.429 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:21:05.438Z,1478888465.438 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:21:05.438Z,1478888465.438 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:21:05.439Z,1478888465.439 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:21:05.439Z,1478888465.439 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:21:05.440Z,1478888465.440 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:21:05.440Z,1478888465.440 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:21:05.820Z,1478888465.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:05.826Z,1478888465.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:06.229Z,1478888466.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:06.616Z,1478888466.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:06.625Z,1478888466.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:07.033Z,1478888467.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:07.307Z,1478888467.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:07.433Z,1478888467.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:07.824Z,1478888467.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:08.100Z,1478888468.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:08.232Z,1478888468.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:08.632Z,1478888468.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:08.896Z,1478888468.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:09.031Z,1478888469.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:09.320Z,1478888469.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:09.429Z,1478888469.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:09.833Z,1478888469.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:10.116Z,1478888470.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:10.226Z,1478888470.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:10.629Z,1478888470.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:10.912Z,1478888470.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:11.037Z,1478888471.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:11.320Z,1478888471.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:11.430Z,1478888471.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:11.825Z,1478888471.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:12.116Z,1478888472.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:12.237Z,1478888472.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:12.626Z,1478888472.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:12.912Z,1478888472.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:13.073Z,1478888473.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:13.320Z,1478888473.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:13.437Z,1478888473.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:13.832Z,1478888473.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:14.116Z,1478888474.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:14.235Z,1478888474.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:14.677Z,1478888474.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:14.912Z,1478888474.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:15.041Z,1478888475.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:15.450Z,1478888475.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:15.452Z,1478888475.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:15.841Z,1478888475.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:16.244Z,1478888476.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:16.248Z,1478888476.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:16.650Z,1478888476.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:17.041Z,1478888477.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:17.044Z,1478888477.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:17.434Z,1478888477.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:17.752Z,1478888477.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:17.821Z,1478888477.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:18.225Z,1478888478.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:18.548Z,1478888478.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:18.625Z,1478888478.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:19.029Z,1478888479.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:19.345Z,1478888479.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:19.433Z,1478888479.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:19.752Z,1478888479.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:19.826Z,1478888479.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:20.223Z,1478888480.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:20.549Z,1478888480.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:20.625Z,1478888480.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:21.031Z,1478888481.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:21.308Z,1478888481.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:21.431Z,1478888481.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:21.834Z,1478888481.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:22.106Z,1478888482.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:22.224Z,1478888482.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:22.632Z,1478888482.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:22.900Z,1478888482.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:23.031Z,1478888483.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:23.312Z,1478888483.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:23.426Z,1478888483.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:23.829Z,1478888483.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:24.110Z,1478888484.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:24.233Z,1478888484.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:24.641Z,1478888484.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:24.904Z,1478888484.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:25.039Z,1478888485.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:25.312Z,1478888485.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:25.444Z,1478888485.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:25.822Z,1478888485.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:26.108Z,1478888486.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:26.215Z,1478888486.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:26.619Z,1478888486.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:26.904Z,1478888486.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:27.028Z,1478888487.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:27.312Z,1478888487.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:27.453Z,1478888487.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:27.829Z,1478888487.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:28.108Z,1478888488.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:28.223Z,1478888488.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:28.623Z,1478888488.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:28.905Z,1478888488.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:29.376Z,1478888489.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:30.172Z,1478888490.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:30.968Z,1478888490.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:31.756Z,1478888491.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:31.994Z,1478888491.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:32.139Z,1478888492.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:32.528Z,1478888492.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:32.552Z,1478888492.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:32.929Z,1478888492.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:33.348Z,1478888493.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:33.394Z,1478888493.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:33.733Z,1478888493.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:33.772Z,1478888493.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:34.161Z,1478888494.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:34.550Z,1478888494.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:34.568Z,1478888494.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:34.934Z,1478888494.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:35.260Z,1478888495.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:35.325Z,1478888495.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:35.721Z,1478888495.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:36.056Z,1478888496.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:36.129Z,1478888496.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:36.525Z,1478888496.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:36.853Z,1478888496.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:36.967Z,1478888496.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:37.260Z,1478888497.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:37.348Z,1478888497.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:37.722Z,1478888497.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:38.056Z,1478888498.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:38.130Z,1478888498.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:38.520Z,1478888498.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:38.854Z,1478888498.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:38.941Z,1478888498.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:39.264Z,1478888499.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:39.323Z,1478888499.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:39.721Z,1478888499.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:40.060Z,1478888500.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:40.140Z,1478888500.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:40.536Z,1478888500.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:40.858Z,1478888500.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:40.976Z,1478888500.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:41.280Z,1478888501.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:41.336Z,1478888501.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:41.736Z,1478888501.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:42.088Z,1478888502.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:42.133Z,1478888502.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:42.558Z,1478888502.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:42.890Z,1478888502.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:43.005Z,1478888503.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:43.316Z,1478888503.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:43.380Z,1478888503.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:43.722Z,1478888503.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:44.118Z,1478888504.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:44.176Z,1478888504.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:44.521Z,1478888504.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:44.926Z,1478888504.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:44.972Z,1478888504.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:45.370Z,1478888505.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:45.729Z,1478888505.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:45.768Z,1478888505.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:46.133Z,1478888506.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:46.176Z,1478888506.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:46.557Z,1478888506.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:46.932Z,1478888506.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:46.972Z,1478888506.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:47.331Z,1478888507.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:47.757Z,1478888507.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:47.764Z,1478888507.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:48.127Z,1478888508.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:48.543Z,1478888508.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:48.560Z,1478888508.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:48.946Z,1478888508.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:49.240Z,1478888509.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:49.325Z,1478888509.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:49.725Z,1478888509.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:50.036Z,1478888510.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:50.128Z,1478888510.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:50.529Z,1478888510.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:50.832Z,1478888510.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:50.926Z,1478888510.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:51.240Z,1478888511.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:51.328Z,1478888511.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:51.725Z,1478888511.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:52.036Z,1478888512.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:52.128Z,1478888512.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:52.528Z,1478888512.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:52.832Z,1478888512.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:52.925Z,1478888512.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:53.252Z,1478888513.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:53.371Z,1478888513.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:53.756Z,1478888513.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:54.048Z,1478888514.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:54.173Z,1478888514.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:54.538Z,1478888514.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:54.844Z,1478888514.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:54.956Z,1478888514.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:55.252Z,1478888515.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:55.350Z,1478888515.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:55.753Z,1478888515.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:56.048Z,1478888516.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:56.150Z,1478888516.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:56.537Z,1478888516.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:56.844Z,1478888516.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:56.974Z,1478888516.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:57.350Z,1478888517.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:57.448Z,1478888517.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:57.757Z,1478888517.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:58.169Z,1478888518.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:58.245Z,1478888518.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:58.541Z,1478888518.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:58.968Z,1478888518.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:59.040Z,1478888519.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:59.342Z,1478888519.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:21:59.800Z,1478888519.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:21:59.845Z,1478888519.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:00.155Z,1478888520.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:00.533Z,1478888520.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:00.596Z,1478888520.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:01.005Z,1478888521.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:01.350Z,1478888521.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:01.392Z,1478888521.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:01.746Z,1478888521.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:01.800Z,1478888521.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:02.157Z,1478888522.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:02.525Z,1478888522.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:02.596Z,1478888522.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:02.975Z,1478888522.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:03.220Z,1478888523.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:03.354Z,1478888523.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:03.761Z,1478888523.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:04.016Z,1478888524.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:04.137Z,1478888524.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:04.524Z,1478888524.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:04.812Z,1478888524.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:04.924Z,1478888524.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:05.220Z,1478888525.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:05.344Z,1478888525.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:05.728Z,1478888525.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:06.016Z,1478888526.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:06.144Z,1478888526.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:06.516Z,1478888526.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:06.812Z,1478888526.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:06.955Z,1478888526.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:07.220Z,1478888527.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:07.362Z,1478888527.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:07.762Z,1478888527.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:08.016Z,1478888528.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:08.139Z,1478888528.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:08.547Z,1478888528.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:08.812Z,1478888528.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:08.989Z,1478888528.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:09.252Z,1478888529.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:09.382Z,1478888529.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:09.733Z,1478888529.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:10.048Z,1478888530.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:10.145Z,1478888530.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:10.548Z,1478888530.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:10.845Z,1478888530.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:10.953Z,1478888530.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:11.325Z,1478888531.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:11.444Z,1478888531.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:11.726Z,1478888531.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:12.133Z,1478888532.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:12.240Z,1478888532.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:12.545Z,1478888532.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:12.919Z,1478888532.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:13.038Z,1478888533.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:13.381Z,1478888533.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:13.729Z,1478888533.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:13.740Z,1478888533.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:14.134Z,1478888534.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:14.536Z,1478888534.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:14.542Z,1478888534.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:14.946Z,1478888534.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:15.326Z,1478888535.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:15.332Z,1478888535.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:15.730Z,1478888535.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:15.752Z,1478888535.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:16.153Z,1478888536.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:16.534Z,1478888536.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:16.548Z,1478888536.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:16.968Z,1478888536.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:17.209Z,1478888537.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:17.338Z,1478888537.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:17.758Z,1478888537.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:18.004Z,1478888538.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:18.149Z,1478888538.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:18.550Z,1478888538.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:18.800Z,1478888538.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:18.926Z,1478888538.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:19.208Z,1478888539.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:19.327Z,1478888539.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:19.721Z,1478888539.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:20.004Z,1478888540.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:20.111Z,1478888540.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:20.542Z,1478888540.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:20.800Z,1478888540.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:20.957Z,1478888540.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:21.208Z,1478888541.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:21.328Z,1478888541.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:21.733Z,1478888541.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:22.004Z,1478888542.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:22.175Z,1478888542.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:22.541Z,1478888542.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:22.800Z,1478888542.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:22.938Z,1478888542.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:23.208Z,1478888543.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:23.314Z,1478888543.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:23.716Z,1478888543.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:24.004Z,1478888544.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:24.122Z,1478888544.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:24.515Z,1478888544.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:24.800Z,1478888544.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:24.944Z,1478888544.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:25.325Z,1478888545.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:25.332Z,1478888545.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:25.721Z,1478888545.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:26.118Z,1478888546.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:26.128Z,1478888546.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:26.518Z,1478888546.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:26.924Z,1478888546.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:26.925Z,1478888546.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:27.320Z,1478888547.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:27.644Z,1478888547.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:27.729Z,1478888547.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:28.128Z,1478888548.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:28.440Z,1478888548.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:28.528Z,1478888548.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:28.925Z,1478888548.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:29.236Z,1478888549.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:29.644Z,1478888549.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:30.440Z,1478888550.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:31.184Z,1478888551.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:31.980Z,1478888551.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:32.450Z,1478888552.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:32.585Z,1478888552.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:32.776Z,1478888552.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:32.996Z,1478888552.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:33.204Z,1478888553.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:33.407Z,1478888553.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:33.789Z,1478888553.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:33.000Z,1478888554.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:34.178Z,1478888554.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:34.561Z,1478888554.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:34.796Z,1478888554.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:34.955Z,1478888554.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:35.204Z,1478888555.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:35.361Z,1478888555.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:35.757Z,1478888555.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:35.000Z,1478888556.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:36.154Z,1478888556.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:36.554Z,1478888556.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:36.796Z,1478888556.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:37.005Z,1478888557.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:37.359Z,1478888557.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:37.592Z,1478888557.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:37.761Z,1478888557.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:38.168Z,1478888558.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:38.388Z,1478888558.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:38.564Z,1478888558.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:38.967Z,1478888558.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:39.184Z,1478888559.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:39.364Z,1478888559.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:39.764Z,1478888559.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:39.980Z,1478888559.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:40.162Z,1478888560.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:40.564Z,1478888560.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:40.776Z,1478888560.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:40.964Z,1478888560.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:41.359Z,1478888561.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:41.572Z,1478888561.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:41.752Z,1478888561.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:42.157Z,1478888562.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:42.368Z,1478888562.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:42.553Z,1478888562.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:42.961Z,1478888562.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:43.164Z,1478888563.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:43.366Z,1478888563.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:43.761Z,1478888563.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:43.960Z,1478888563.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:44.161Z,1478888564.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:44.566Z,1478888564.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:44.756Z,1478888564.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:44.957Z,1478888564.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:45.366Z,1478888565.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:45.552Z,1478888565.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:45.756Z,1478888565.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:46.213Z,1478888566.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:46.349Z,1478888566.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:46.576Z,1478888566.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:46.985Z,1478888566.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:47.144Z,1478888567.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:47.374Z,1478888567.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:47.785Z,1478888567.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:47.940Z,1478888567.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:48.185Z,1478888568.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:48.556Z,1478888568.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:48.736Z,1478888568.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:48.952Z,1478888568.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:49.412Z,1478888569.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:49.532Z,1478888569.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:49.755Z,1478888569.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:49.940Z,1478888569.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:50.161Z,1478888570.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:50.348Z,1478888570.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:50.556Z,1478888570.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:50.756Z,1478888570.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:50.955Z,1478888570.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:51.164Z,1478888571.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:51.354Z,1478888571.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:51.572Z,1478888571.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:51.756Z,1478888571.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:51.980Z,1478888571.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:52.163Z,1478888572.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:52.388Z,1478888572.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:52.566Z,1478888572.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:52.797Z,1478888572.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:52.973Z,1478888572.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:53.240Z,1478888573.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:53.361Z,1478888573.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:53.766Z,1478888573.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:54.036Z,1478888574.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:54.161Z,1478888574.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:54.567Z,1478888574.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:54.832Z,1478888574.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:55.008Z,1478888575.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:55.364Z,1478888575.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:55.604Z,1478888575.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:55.764Z,1478888575.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:56.164Z,1478888576.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:56.400Z,1478888576.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:56.564Z,1478888576.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:56.965Z,1478888576.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:57.196Z,1478888577.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:57.369Z,1478888577.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:57.604Z,1478888577.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:57.753Z,1478888577.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:58.152Z,1478888578.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:58.400Z,1478888578.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:58.553Z,1478888578.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:58.965Z,1478888578.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:59.128Z,1478888579.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:22:59.356Z,1478888579.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:59.761Z,1478888579.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:22:59.924Z,1478888579.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:00.193Z,1478888580.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:00.600Z,1478888580.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:00.720Z,1478888580.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:00.975Z,1478888580.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:01.148Z,1478888581.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:01.385Z,1478888581.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:01.774Z,1478888581.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:01.944Z,1478888581.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:02.178Z,1478888582.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:02.585Z,1478888582.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:02.740Z,1478888582.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:02.958Z,1478888582.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:03.148Z,1478888583.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:03.361Z,1478888583.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:03.758Z,1478888583.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:03.944Z,1478888583.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:04.161Z,1478888584.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:04.565Z,1478888584.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:04.740Z,1478888584.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:04.958Z,1478888584.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:05.148Z,1478888585.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:05.369Z,1478888585.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:05.758Z,1478888585.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:05.944Z,1478888585.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:06.157Z,1478888586.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:06.565Z,1478888586.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:06.740Z,1478888586.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:06.964Z,1478888586.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:07.220Z,1478888587.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:07.358Z,1478888587.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:07.764Z,1478888587.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:08.016Z,1478888588.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:08.166Z,1478888588.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:08.558Z,1478888588.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:08.812Z,1478888588.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:08.962Z,1478888588.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:09.366Z,1478888589.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:09.580Z,1478888589.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:09.756Z,1478888589.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:10.161Z,1478888590.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:10.376Z,1478888590.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:10.565Z,1478888590.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:10.953Z,1478888590.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:11.172Z,1478888591.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:11.353Z,1478888591.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:11.580Z,1478888591.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:11.753Z,1478888591.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:12.156Z,1478888592.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:12.376Z,1478888592.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:12.553Z,1478888592.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:12.957Z,1478888592.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:13.108Z,1478888593.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:13.356Z,1478888593.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:13.766Z,1478888593.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:13.904Z,1478888593.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:14.155Z,1478888594.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:14.609Z,1478888594.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:14.700Z,1478888594.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:14.965Z,1478888594.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:15.132Z,1478888595.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:15.365Z,1478888595.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:15.804Z,1478888595.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:15.928Z,1478888595.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:16.164Z,1478888596.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:16.595Z,1478888596.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:16.724Z,1478888596.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:16.985Z,1478888596.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:17.144Z,1478888597.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:17.373Z,1478888597.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:17.753Z,1478888597.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:17.940Z,1478888597.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:18.154Z,1478888598.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:18.551Z,1478888598.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:18.736Z,1478888598.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:18.956Z,1478888598.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:19.144Z,1478888599.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:19.354Z,1478888599.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:19.761Z,1478888599.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:19.940Z,1478888599.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:20.155Z,1478888600.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:20.555Z,1478888600.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:20.737Z,1478888600.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:20.963Z,1478888600.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:21.200Z,1478888601.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:21.357Z,1478888601.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:21.756Z,1478888601.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:21.996Z,1478888601.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:22.165Z,1478888602.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:22.566Z,1478888602.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:22.792Z,1478888602.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:22.961Z,1478888602.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:23.356Z,1478888603.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:23.560Z,1478888603.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:23.770Z,1478888603.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:24.164Z,1478888604.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:24.356Z,1478888604.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:24.566Z,1478888604.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:24.968Z,1478888604.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:25.153Z,1478888605.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:25.368Z,1478888605.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:25.564Z,1478888605.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:25.769Z,1478888605.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:26.169Z,1478888606.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:26.360Z,1478888606.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:26.572Z,1478888606.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:26.961Z,1478888606.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:27.104Z,1478888607.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:27.365Z,1478888607.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:27.755Z,1478888607.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:27.900Z,1478888607.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:28.168Z,1478888608.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:28.555Z,1478888608.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:28.696Z,1478888608.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:28.989Z,1478888608.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:29.104Z,1478888609.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:29.900Z,1478888609.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:30.697Z,1478888610.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:31.108Z,1478888611.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:31.904Z,1478888611.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:32.342Z,1478888612.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:32.493Z,1478888612.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:32.700Z,1478888612.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:32.877Z,1478888612.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:33.108Z,1478888613.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:33.245Z,1478888613.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:33.669Z,1478888613.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:33.904Z,1478888613.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:34.062Z,1478888614.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:34.440Z,1478888614.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:34.701Z,1478888614.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:34.840Z,1478888614.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:35.168Z,1478888615.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:35.240Z,1478888615.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:35.651Z,1478888615.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:35.964Z,1478888615.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:36.024Z,1478888616.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:36.423Z,1478888616.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:36.760Z,1478888616.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:36.846Z,1478888616.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:37.231Z,1478888617.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:37.524Z,1478888617.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:37.630Z,1478888617.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:38.037Z,1478888618.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:38.320Z,1478888618.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:38.432Z,1478888618.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:38.837Z,1478888618.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:39.117Z,1478888619.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:39.237Z,1478888619.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:39.528Z,1478888619.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:39.635Z,1478888619.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:40.037Z,1478888620.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:40.324Z,1478888620.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:40.437Z,1478888620.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:40.832Z,1478888620.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:41.056Z,1478888621.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:41.240Z,1478888621.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:41.638Z,1478888621.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:41.852Z,1478888621.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:42.034Z,1478888622.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:42.457Z,1478888622.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:42.648Z,1478888622.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:42.842Z,1478888622.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:43.056Z,1478888623.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:43.234Z,1478888623.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:43.641Z,1478888623.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:43.852Z,1478888623.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:44.043Z,1478888624.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:44.435Z,1478888624.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:44.648Z,1478888624.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:44.839Z,1478888624.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:45.056Z,1478888625.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:45.241Z,1478888625.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:45.632Z,1478888625.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:45.852Z,1478888625.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:46.058Z,1478888626.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:46.469Z,1478888626.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:46.648Z,1478888626.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:46.851Z,1478888626.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:47.056Z,1478888627.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:47.250Z,1478888627.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:47.629Z,1478888627.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:47.852Z,1478888627.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:48.061Z,1478888628.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:48.450Z,1478888628.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:48.648Z,1478888628.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:48.841Z,1478888628.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:49.164Z,1478888629.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:49.233Z,1478888629.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:49.637Z,1478888629.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:49.960Z,1478888629.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:50.045Z,1478888630.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:50.431Z,1478888630.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:50.757Z,1478888630.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:50.832Z,1478888630.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:51.238Z,1478888631.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:51.510Z,1478888631.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:51.635Z,1478888631.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:52.037Z,1478888632.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:52.304Z,1478888632.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:52.445Z,1478888632.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:52.834Z,1478888632.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:53.100Z,1478888633.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:53.239Z,1478888633.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:53.508Z,1478888633.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:53.645Z,1478888633.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:54.032Z,1478888634.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:54.304Z,1478888634.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:54.440Z,1478888634.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:54.844Z,1478888634.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:55.032Z,1478888635.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:55.238Z,1478888635.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:55.637Z,1478888635.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:55.830Z,1478888635.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:56.049Z,1478888636.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:56.445Z,1478888636.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:56.625Z,1478888636.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:56.835Z,1478888636.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:57.032Z,1478888637.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:57.228Z,1478888637.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:57.632Z,1478888637.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:57.828Z,1478888637.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:58.037Z,1478888638.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:58.442Z,1478888638.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:58.624Z,1478888638.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:58.831Z,1478888638.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:59.032Z,1478888639.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:23:59.237Z,1478888639.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:59.636Z,1478888639.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:23:59.828Z,1478888639.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:00.031Z,1478888640.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:00.489Z,1478888640.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:00.624Z,1478888640.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:00.836Z,1478888640.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:01.032Z,1478888641.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:01.265Z,1478888641.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:01.637Z,1478888641.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:01.828Z,1478888641.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:02.066Z,1478888642.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:02.470Z,1478888642.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:02.624Z,1478888642.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:02.836Z,1478888642.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:03.132Z,1478888643.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:03.228Z,1478888643.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:03.632Z,1478888643.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:03.928Z,1478888643.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:04.040Z,1478888644.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:04.436Z,1478888644.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:04.724Z,1478888644.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:04.834Z,1478888644.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:05.236Z,1478888645.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:05.496Z,1478888645.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:05.634Z,1478888645.634 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:05.634Z,1478888645.634 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 251
2016-11-11T18:24:05.634Z,1478888645.634 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:24:05.641Z,1478888645.641 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:05.641Z,1478888645.641 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 251
2016-11-11T18:24:05.641Z,1478888645.641 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:24:05.643Z,1478888645.643 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:05.643Z,1478888645.643 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 251
2016-11-11T18:24:05.643Z,1478888645.643 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:24:05.657Z,1478888645.657 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:24:05.658Z,1478888645.658 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:24:05.658Z,1478888645.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:24:06.049Z,1478888646.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:24:06.049Z,1478888646.049 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 251
2016-11-11T18:24:06.050Z,1478888646.050 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:24:06.050Z,1478888646.050 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 251
2016-11-11T18:24:06.051Z,1478888646.050 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:24:06.051Z,1478888646.051 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 251
2016-11-11T18:24:06.292Z,1478888646.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:06.439Z,1478888646.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:24:06.439Z,1478888646.439 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:24:06.440Z,1478888646.440 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:24:06.444Z,1478888646.444 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:24:06.445Z,1478888646.445 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:24:06.445Z,1478888646.445 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:24:06.445Z,1478888646.445 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:24:06.446Z,1478888646.446 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:24:06.446Z,1478888646.446 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:24:06.853Z,1478888646.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:07.088Z,1478888647.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:07.243Z,1478888647.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:07.496Z,1478888647.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:07.643Z,1478888647.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:08.037Z,1478888648.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:08.292Z,1478888648.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:08.425Z,1478888648.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:08.829Z,1478888648.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:09.012Z,1478888649.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:09.229Z,1478888649.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:09.629Z,1478888649.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:09.808Z,1478888649.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:10.029Z,1478888650.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:10.433Z,1478888650.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:10.604Z,1478888650.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:10.831Z,1478888650.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:11.012Z,1478888651.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:11.240Z,1478888651.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:11.634Z,1478888651.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:11.810Z,1478888651.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:12.037Z,1478888652.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:12.436Z,1478888652.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:12.604Z,1478888652.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:12.840Z,1478888652.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:13.016Z,1478888653.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:13.233Z,1478888653.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:13.641Z,1478888653.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:13.812Z,1478888653.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:14.036Z,1478888654.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:14.482Z,1478888654.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:14.608Z,1478888654.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:14.837Z,1478888654.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:15.016Z,1478888655.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:15.237Z,1478888655.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:15.670Z,1478888655.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:15.812Z,1478888655.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:16.030Z,1478888656.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:16.454Z,1478888656.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:16.610Z,1478888656.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:16.874Z,1478888656.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:17.104Z,1478888657.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:17.237Z,1478888657.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:17.637Z,1478888657.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:17.900Z,1478888657.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:18.034Z,1478888658.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:18.441Z,1478888658.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:18.696Z,1478888658.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:18.839Z,1478888658.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:19.232Z,1478888659.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:19.472Z,1478888659.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:19.640Z,1478888659.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:20.033Z,1478888660.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:20.268Z,1478888660.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:20.434Z,1478888660.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:20.832Z,1478888660.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:21.064Z,1478888661.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:21.238Z,1478888661.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:21.480Z,1478888661.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:21.637Z,1478888661.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:22.041Z,1478888662.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:22.276Z,1478888662.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:22.437Z,1478888662.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:22.832Z,1478888662.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:22.992Z,1478888662.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:23.237Z,1478888663.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:23.642Z,1478888663.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:23.788Z,1478888663.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:24.033Z,1478888664.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:24.432Z,1478888664.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:24.584Z,1478888664.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:24.841Z,1478888664.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:24.992Z,1478888664.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:25.232Z,1478888665.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:25.641Z,1478888665.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:25.788Z,1478888665.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:26.042Z,1478888666.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:26.434Z,1478888666.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:26.584Z,1478888666.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:26.845Z,1478888666.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:26.992Z,1478888666.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:27.241Z,1478888667.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:27.637Z,1478888667.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:27.789Z,1478888667.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:28.043Z,1478888668.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:28.052Z,1478888668.052 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T18:24:28.052Z,1478888668.052 [Default:CheckIn:C.Wait] Stopped
2016-11-11T18:24:28.052Z,1478888668.052 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T18:24:28.052Z,1478888668.052 [Default:CheckIn:D] Running Loop=1
2016-11-11T18:24:28.449Z,1478888668.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:28.465Z,1478888668.466 [Default:CheckIn:D] Stopped
2016-11-11T18:24:28.466Z,1478888668.466 [Default:CheckIn:E] Running Loop=1
2016-11-11T18:24:28.584Z,1478888668.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:28.889Z,1478888668.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:28.903Z,1478888668.903 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 814.452604 min 
2016-11-11T18:24:28.907Z,1478888668.907 [Default:CheckIn:E] Stopped
2016-11-11T18:24:28.907Z,1478888668.907 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T18:24:28.907Z,1478888668.907 [Default:CheckIn] Stopped
2016-11-11T18:24:28.908Z,1478888668.908 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T18:24:28.908Z,1478888668.908 [Default:CheckIn](INFO): Running loop #79
2016-11-11T18:24:28.908Z,1478888668.908 [Default:CheckIn] Running Loop=79
2016-11-11T18:24:28.908Z,1478888668.908 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T18:24:28.908Z,1478888668.908 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T18:24:28.992Z,1478888668.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:29.231Z,1478888669.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:29.788Z,1478888669.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:30.584Z,1478888670.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:31.112Z,1478888671.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:31.908Z,1478888671.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:32.548Z,1478888672.548 [NAL9602](INFO): Powering up
2016-11-11T18:24:32.626Z,1478888672.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:32.704Z,1478888672.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:32.766Z,1478888672.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:33.122Z,1478888673.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:33.444Z,1478888673.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:33.533Z,1478888673.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:33.906Z,1478888673.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:34.240Z,1478888674.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:34.303Z,1478888674.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:34.700Z,1478888674.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:35.038Z,1478888675.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:35.114Z,1478888675.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:35.448Z,1478888675.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:35.504Z,1478888675.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:35.909Z,1478888675.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:36.244Z,1478888676.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:36.309Z,1478888676.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:36.729Z,1478888676.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:36.968Z,1478888676.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:37.105Z,1478888677.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:37.498Z,1478888677.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:37.765Z,1478888677.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:37.899Z,1478888677.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:38.299Z,1478888678.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:38.561Z,1478888678.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:38.715Z,1478888678.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:38.968Z,1478888678.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:39.108Z,1478888679.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:39.502Z,1478888679.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:39.764Z,1478888679.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:39.908Z,1478888679.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:40.309Z,1478888680.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:40.560Z,1478888680.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:40.725Z,1478888680.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:40.968Z,1478888680.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:41.101Z,1478888681.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:41.505Z,1478888681.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:41.764Z,1478888681.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:41.909Z,1478888681.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:42.319Z,1478888682.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:42.560Z,1478888682.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:42.708Z,1478888682.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:42.968Z,1478888682.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:43.112Z,1478888683.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:43.461Z,1478888683.461 [NAL9602](INFO): NAL9602 initialized
2016-11-11T18:24:43.506Z,1478888683.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:43.764Z,1478888683.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:43.912Z,1478888683.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:44.261Z,1478888684.261 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T18:24:44.261Z,1478888684.261 [NAL9602] Data Fault, FailCount= 1
2016-11-11T18:24:44.261Z,1478888684.261 [NAL9602](ERROR): Data Fault
2016-11-11T18:24:44.328Z,1478888684.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:44.366Z,1478888684.366 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T18:24:44.560Z,1478888684.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:44.660Z,1478888684.661 [NAL9602](INFO): Powering down
2016-11-11T18:24:44.724Z,1478888684.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:45.109Z,1478888685.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:45.116Z,1478888685.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:45.549Z,1478888685.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:45.578Z,1478888685.578 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T18:24:45.578Z,1478888685.578 [NAL9602] No Fault, FailCount= 1
2016-11-11T18:24:45.899Z,1478888685.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:45.912Z,1478888685.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:46.337Z,1478888686.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:46.699Z,1478888686.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:46.708Z,1478888686.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:47.137Z,1478888687.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:47.432Z,1478888687.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:47.513Z,1478888687.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:47.922Z,1478888687.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:48.228Z,1478888688.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:48.308Z,1478888688.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:48.709Z,1478888688.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:49.024Z,1478888689.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:49.120Z,1478888689.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:49.432Z,1478888689.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:49.502Z,1478888689.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:49.861Z,1478888689.861 [NAL9602](INFO): Powering up NAL9602
2016-11-11T18:24:49.912Z,1478888689.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:50.228Z,1478888690.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:50.305Z,1478888690.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:50.705Z,1478888690.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:50.948Z,1478888690.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:51.102Z,1478888691.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:51.510Z,1478888691.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:51.744Z,1478888691.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:51.902Z,1478888691.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:52.321Z,1478888692.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:52.540Z,1478888692.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:52.705Z,1478888692.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:52.948Z,1478888692.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:53.102Z,1478888693.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:53.537Z,1478888693.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:53.744Z,1478888693.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:53.906Z,1478888693.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:54.300Z,1478888694.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:54.540Z,1478888694.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:54.708Z,1478888694.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:54.948Z,1478888694.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:55.104Z,1478888695.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:55.503Z,1478888695.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:55.744Z,1478888695.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:55.909Z,1478888695.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:56.305Z,1478888696.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:56.540Z,1478888696.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:56.717Z,1478888696.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:56.948Z,1478888696.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:57.097Z,1478888697.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:57.529Z,1478888697.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:57.744Z,1478888697.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:57.918Z,1478888697.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:58.319Z,1478888698.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:58.540Z,1478888698.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:58.720Z,1478888698.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:59.052Z,1478888699.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:59.118Z,1478888699.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:59.498Z,1478888699.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:24:59.848Z,1478888699.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:24:59.961Z,1478888699.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:00.308Z,1478888700.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:00.644Z,1478888700.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:00.661Z,1478888700.661 [NAL9602](INFO): NAL9602 initialized
2016-11-11T18:25:00.722Z,1478888700.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:01.109Z,1478888701.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:01.400Z,1478888701.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:01.539Z,1478888701.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:01.914Z,1478888701.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:02.196Z,1478888702.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:02.350Z,1478888702.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:02.705Z,1478888702.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:02.993Z,1478888702.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:03.108Z,1478888703.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:03.400Z,1478888703.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:03.513Z,1478888703.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:03.915Z,1478888703.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:04.196Z,1478888704.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:04.314Z,1478888704.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:04.712Z,1478888704.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:04.928Z,1478888704.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:05.105Z,1478888705.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:05.512Z,1478888705.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:05.724Z,1478888705.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:05.913Z,1478888705.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:06.312Z,1478888706.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:06.520Z,1478888706.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:06.714Z,1478888706.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:06.928Z,1478888706.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:07.113Z,1478888707.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:07.512Z,1478888707.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:07.724Z,1478888707.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:07.913Z,1478888707.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:08.292Z,1478888708.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:08.520Z,1478888708.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:08.728Z,1478888708.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:08.928Z,1478888708.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:09.125Z,1478888709.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:09.533Z,1478888709.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:09.724Z,1478888709.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:09.923Z,1478888709.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:10.329Z,1478888710.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:10.520Z,1478888710.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:10.703Z,1478888710.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:10.936Z,1478888710.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:11.102Z,1478888711.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:11.510Z,1478888711.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:11.732Z,1478888711.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:11.902Z,1478888711.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:12.312Z,1478888712.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:12.530Z,1478888712.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:12.710Z,1478888712.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:13.020Z,1478888713.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:13.106Z,1478888713.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:13.509Z,1478888713.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:13.816Z,1478888713.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:13.925Z,1478888713.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:14.392Z,1478888714.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:14.612Z,1478888714.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:14.730Z,1478888714.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:15.125Z,1478888715.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:15.380Z,1478888715.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:15.526Z,1478888715.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:15.920Z,1478888715.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:16.176Z,1478888716.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:16.330Z,1478888716.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:16.730Z,1478888716.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:16.972Z,1478888716.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:17.101Z,1478888717.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:17.380Z,1478888717.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:17.501Z,1478888717.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:17.901Z,1478888717.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:18.176Z,1478888718.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:18.309Z,1478888718.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:18.707Z,1478888718.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:18.904Z,1478888718.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:19.121Z,1478888719.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:19.510Z,1478888719.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:19.700Z,1478888719.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:19.918Z,1478888719.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:20.321Z,1478888720.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:20.497Z,1478888720.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:20.709Z,1478888720.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:20.904Z,1478888720.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:21.110Z,1478888721.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:21.509Z,1478888721.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:21.700Z,1478888721.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:21.905Z,1478888721.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:22.312Z,1478888722.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:22.496Z,1478888722.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:22.713Z,1478888722.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:22.904Z,1478888722.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:23.112Z,1478888723.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:23.513Z,1478888723.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:23.700Z,1478888723.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:23.892Z,1478888723.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:24.323Z,1478888724.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:24.496Z,1478888724.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:24.724Z,1478888724.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:24.904Z,1478888724.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:25.133Z,1478888725.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:25.531Z,1478888725.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:25.700Z,1478888725.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:25.899Z,1478888725.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:26.307Z,1478888726.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:26.496Z,1478888726.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:26.709Z,1478888726.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:26.996Z,1478888726.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:27.117Z,1478888727.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:27.511Z,1478888727.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:27.792Z,1478888727.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:27.908Z,1478888727.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:28.309Z,1478888728.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:28.590Z,1478888728.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:28.737Z,1478888728.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:29.137Z,1478888729.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:29.356Z,1478888729.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:29.525Z,1478888729.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:30.152Z,1478888730.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:30.948Z,1478888730.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:31.372Z,1478888731.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:32.168Z,1478888732.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:32.896Z,1478888732.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:33.118Z,1478888733.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:33.268Z,1478888733.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:33.646Z,1478888733.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:33.692Z,1478888733.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:34.040Z,1478888734.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:34.392Z,1478888734.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:34.488Z,1478888734.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:34.799Z,1478888734.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:34.916Z,1478888734.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:35.204Z,1478888735.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:35.605Z,1478888735.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:35.712Z,1478888735.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:36.004Z,1478888736.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:36.396Z,1478888736.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:36.508Z,1478888736.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:36.800Z,1478888736.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:36.916Z,1478888736.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:37.197Z,1478888737.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:37.611Z,1478888737.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:37.712Z,1478888737.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:38.013Z,1478888738.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:38.448Z,1478888738.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:38.508Z,1478888738.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:38.813Z,1478888738.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:38.916Z,1478888738.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:39.189Z,1478888739.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:39.589Z,1478888739.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:39.712Z,1478888739.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:39.999Z,1478888740.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:40.390Z,1478888740.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:40.516Z,1478888740.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:40.801Z,1478888740.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:40.980Z,1478888740.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:41.192Z,1478888741.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:41.602Z,1478888741.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:41.776Z,1478888741.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:42.001Z,1478888742.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:42.396Z,1478888742.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:42.574Z,1478888742.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:42.806Z,1478888742.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:43.207Z,1478888743.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:43.356Z,1478888743.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:43.627Z,1478888743.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:44.035Z,1478888744.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:44.152Z,1478888744.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:44.405Z,1478888744.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:44.797Z,1478888744.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:44.948Z,1478888744.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:45.205Z,1478888745.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:45.356Z,1478888745.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:45.620Z,1478888745.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:46.021Z,1478888746.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:46.153Z,1478888746.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:46.451Z,1478888746.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:46.833Z,1478888746.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:46.892Z,1478888746.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:47.191Z,1478888747.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:47.640Z,1478888747.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:47.688Z,1478888747.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:48.036Z,1478888748.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:48.468Z,1478888748.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:48.484Z,1478888748.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:48.833Z,1478888748.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:48.892Z,1478888748.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:49.205Z,1478888749.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:49.592Z,1478888749.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:49.688Z,1478888749.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:49.996Z,1478888749.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:50.467Z,1478888750.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:50.484Z,1478888750.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:50.813Z,1478888750.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:50.892Z,1478888750.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:51.201Z,1478888751.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:51.601Z,1478888751.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:51.688Z,1478888751.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:51.997Z,1478888751.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:52.453Z,1478888752.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:52.484Z,1478888752.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:52.791Z,1478888752.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:52.892Z,1478888752.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:53.206Z,1478888753.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:53.609Z,1478888753.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:53.688Z,1478888753.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:54.013Z,1478888754.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:54.405Z,1478888754.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:54.484Z,1478888754.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:54.808Z,1478888754.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:54.956Z,1478888754.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:55.200Z,1478888755.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:55.601Z,1478888755.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:55.752Z,1478888755.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:56.004Z,1478888756.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:56.403Z,1478888756.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:56.548Z,1478888756.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:56.803Z,1478888756.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:57.189Z,1478888757.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:57.332Z,1478888757.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:57.598Z,1478888757.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:57.993Z,1478888757.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:58.128Z,1478888758.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:58.402Z,1478888758.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:58.799Z,1478888758.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:58.924Z,1478888758.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:59.219Z,1478888759.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:25:59.332Z,1478888759.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:25:59.614Z,1478888759.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:00.081Z,1478888760.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:00.128Z,1478888760.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:00.473Z,1478888760.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:00.826Z,1478888760.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:00.868Z,1478888760.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:01.204Z,1478888761.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:01.631Z,1478888761.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:01.664Z,1478888761.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:02.026Z,1478888762.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:02.453Z,1478888762.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:02.468Z,1478888762.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:02.809Z,1478888762.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:02.876Z,1478888762.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:03.199Z,1478888763.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:03.619Z,1478888763.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:03.672Z,1478888763.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:04.012Z,1478888764.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:04.445Z,1478888764.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:04.468Z,1478888764.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:04.818Z,1478888764.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:04.896Z,1478888764.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:05.220Z,1478888765.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:05.593Z,1478888765.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:05.692Z,1478888765.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:05.999Z,1478888765.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:06.472Z,1478888766.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:06.488Z,1478888766.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:06.807Z,1478888766.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:06.896Z,1478888766.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:07.192Z,1478888767.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:07.596Z,1478888767.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:07.692Z,1478888767.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:07.000Z,1478888768.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:08.415Z,1478888768.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:08.488Z,1478888768.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:08.491Z,1478888768.491 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T18:26:08.821Z,1478888768.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:08.956Z,1478888768.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:09.214Z,1478888769.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:09.612Z,1478888769.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:09.752Z,1478888769.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:10.017Z,1478888770.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:10.412Z,1478888770.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:10.548Z,1478888770.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:10.795Z,1478888770.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:11.194Z,1478888771.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:11.320Z,1478888771.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:11.610Z,1478888771.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:12.002Z,1478888772.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:12.118Z,1478888772.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:12.400Z,1478888772.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:12.796Z,1478888772.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:12.912Z,1478888772.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:13.217Z,1478888773.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:13.320Z,1478888773.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:13.598Z,1478888773.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:14.017Z,1478888774.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:14.116Z,1478888774.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:14.497Z,1478888774.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:14.817Z,1478888774.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:14.864Z,1478888774.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:15.218Z,1478888775.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:15.597Z,1478888775.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:15.660Z,1478888775.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:16.027Z,1478888776.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:16.443Z,1478888776.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:16.456Z,1478888776.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:16.828Z,1478888776.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:16.872Z,1478888776.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:17.186Z,1478888777.186 [PNI_TCM](ERROR): CRC does not match. Expected:0x10982 got:0x16872
2016-11-11T18:26:17.200Z,1478888777.200 [BPC1](ERROR): Failed to receive battery data
2016-11-11T18:26:17.200Z,1478888777.200 [BPC1] Communications Fault, FailCount= 1
2016-11-11T18:26:17.200Z,1478888777.200 [BPC1](ERROR): Communications Fault
2016-11-11T18:26:17.208Z,1478888777.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:17.251Z,1478888777.251 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T18:26:17.605Z,1478888777.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:17.668Z,1478888777.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:18.009Z,1478888778.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:18.443Z,1478888778.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:18.464Z,1478888778.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:18.509Z,1478888778.509 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:26:18.509Z,1478888778.509 [BPC1] No Fault, FailCount= 1
2016-11-11T18:26:18.861Z,1478888778.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:18.872Z,1478888778.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:19.211Z,1478888779.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:19.625Z,1478888779.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:19.668Z,1478888779.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:20.000Z,1478888780.000 [PNI_TCM](ERROR): CRC does not match. Expected:0x27670 got:0x45597
2016-11-11T18:26:20.025Z,1478888780.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:20.434Z,1478888780.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:20.464Z,1478888780.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:20.800Z,1478888780.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:20.872Z,1478888780.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:21.207Z,1478888781.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:21.608Z,1478888781.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:21.668Z,1478888781.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:22.017Z,1478888782.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:22.391Z,1478888782.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:22.465Z,1478888782.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:22.801Z,1478888782.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:22.932Z,1478888782.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:23.235Z,1478888783.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:23.595Z,1478888783.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:23.728Z,1478888783.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:24.000Z,1478888784.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:24.413Z,1478888784.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:24.524Z,1478888784.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:24.878Z,1478888784.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:25.216Z,1478888785.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:25.320Z,1478888785.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:25.613Z,1478888785.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:26.005Z,1478888786.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:26.116Z,1478888786.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:26.385Z,1478888786.385 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T18:26:26.412Z,1478888786.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:26.838Z,1478888786.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:26.912Z,1478888786.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:27.193Z,1478888787.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:27.320Z,1478888787.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:27.598Z,1478888787.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:27.996Z,1478888787.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:28.116Z,1478888788.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:28.447Z,1478888788.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:28.794Z,1478888788.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:28.848Z,1478888788.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:29.208Z,1478888789.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:29.608Z,1478888789.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:29.644Z,1478888789.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:30.440Z,1478888790.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:30.848Z,1478888790.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:31.644Z,1478888791.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:32.440Z,1478888792.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:32.848Z,1478888792.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:33.248Z,1478888793.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:33.413Z,1478888793.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:33.644Z,1478888793.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:33.743Z,1478888793.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:34.121Z,1478888794.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:34.441Z,1478888794.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:34.533Z,1478888794.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:34.852Z,1478888794.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:34.926Z,1478888794.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:35.321Z,1478888795.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:35.649Z,1478888795.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:35.761Z,1478888795.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:36.133Z,1478888796.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:36.445Z,1478888796.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:36.573Z,1478888796.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:36.932Z,1478888796.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:36.953Z,1478888796.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:37.329Z,1478888797.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:37.728Z,1478888797.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:37.737Z,1478888797.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:38.134Z,1478888798.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:38.524Z,1478888798.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:38.549Z,1478888798.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:38.936Z,1478888798.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:39.252Z,1478888799.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:39.332Z,1478888799.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:39.732Z,1478888799.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:40.048Z,1478888800.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:40.133Z,1478888800.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:40.515Z,1478888800.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:40.844Z,1478888800.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:40.941Z,1478888800.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:41.252Z,1478888801.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:41.324Z,1478888801.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:41.720Z,1478888801.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:42.048Z,1478888802.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:42.121Z,1478888802.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:42.520Z,1478888802.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:42.780Z,1478888802.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:42.938Z,1478888802.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:43.330Z,1478888803.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:43.576Z,1478888803.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:43.734Z,1478888803.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:44.133Z,1478888804.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:44.372Z,1478888804.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:44.533Z,1478888804.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:44.780Z,1478888804.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:44.929Z,1478888804.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:45.322Z,1478888805.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:45.576Z,1478888805.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:45.729Z,1478888805.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:46.133Z,1478888806.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:46.372Z,1478888806.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:46.529Z,1478888806.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:46.780Z,1478888806.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:46.930Z,1478888806.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:47.349Z,1478888807.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:47.576Z,1478888807.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:47.736Z,1478888807.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:48.142Z,1478888808.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:48.372Z,1478888808.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:48.544Z,1478888808.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:48.780Z,1478888808.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:48.973Z,1478888808.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:49.341Z,1478888809.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:49.576Z,1478888809.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:49.731Z,1478888809.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:50.147Z,1478888810.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:50.374Z,1478888810.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:50.542Z,1478888810.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:50.876Z,1478888810.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:50.949Z,1478888810.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:51.357Z,1478888811.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:51.688Z,1478888811.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:51.722Z,1478888811.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:52.121Z,1478888812.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:52.486Z,1478888812.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:52.525Z,1478888812.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:52.929Z,1478888812.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:53.228Z,1478888813.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:53.331Z,1478888813.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:53.730Z,1478888813.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:54.024Z,1478888814.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:54.135Z,1478888814.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:54.535Z,1478888814.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:54.820Z,1478888814.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:54.928Z,1478888814.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:55.228Z,1478888815.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:55.328Z,1478888815.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:55.749Z,1478888815.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:56.044Z,1478888816.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:56.135Z,1478888816.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:56.542Z,1478888816.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:56.776Z,1478888816.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:56.944Z,1478888816.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:57.333Z,1478888817.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:57.573Z,1478888817.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:57.744Z,1478888817.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:58.145Z,1478888818.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:58.368Z,1478888818.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:58.554Z,1478888818.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:58.784Z,1478888818.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:58.950Z,1478888818.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:59.365Z,1478888819.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:26:59.580Z,1478888819.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:26:59.746Z,1478888819.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:00.145Z,1478888820.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:00.376Z,1478888820.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:00.540Z,1478888820.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:00.784Z,1478888820.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:00.923Z,1478888820.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:01.333Z,1478888821.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:01.580Z,1478888821.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:01.741Z,1478888821.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:02.169Z,1478888822.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:02.376Z,1478888822.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:02.515Z,1478888822.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:02.788Z,1478888822.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:02.927Z,1478888822.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:03.338Z,1478888823.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:03.584Z,1478888823.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:03.788Z,1478888823.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:04.126Z,1478888824.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:04.381Z,1478888824.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:04.565Z,1478888824.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:04.852Z,1478888824.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:04.927Z,1478888824.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:05.360Z,1478888825.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:05.648Z,1478888825.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:05.757Z,1478888825.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:06.118Z,1478888826.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:06.444Z,1478888826.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:06.549Z,1478888826.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:06.549Z,1478888826.549 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 252
2016-11-11T18:27:06.549Z,1478888826.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:27:06.564Z,1478888826.564 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:06.564Z,1478888826.564 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 252
2016-11-11T18:27:06.564Z,1478888826.565 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:27:06.567Z,1478888826.566 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:06.567Z,1478888826.567 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 252
2016-11-11T18:27:06.567Z,1478888826.567 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:27:06.602Z,1478888826.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:27:06.602Z,1478888826.602 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:27:06.602Z,1478888826.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:27:06.958Z,1478888826.958 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:27:06.958Z,1478888826.958 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 252
2016-11-11T18:27:06.959Z,1478888826.958 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:27:06.959Z,1478888826.959 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 252
2016-11-11T18:27:06.964Z,1478888826.964 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:27:06.964Z,1478888826.964 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 252
2016-11-11T18:27:07.204Z,1478888827.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:07.352Z,1478888827.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:27:07.352Z,1478888827.352 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:27:07.352Z,1478888827.352 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:27:07.357Z,1478888827.357 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:27:07.358Z,1478888827.358 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:27:07.358Z,1478888827.358 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:27:07.358Z,1478888827.358 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:27:07.359Z,1478888827.359 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:27:07.359Z,1478888827.359 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:27:07.725Z,1478888827.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:07.000Z,1478888828.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:08.129Z,1478888828.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:08.541Z,1478888828.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:08.796Z,1478888828.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:08.941Z,1478888828.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:09.236Z,1478888829.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:09.350Z,1478888829.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:09.742Z,1478888829.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:10.032Z,1478888830.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:10.129Z,1478888830.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:10.535Z,1478888830.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:10.765Z,1478888830.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:10.992Z,1478888830.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:11.323Z,1478888831.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:11.560Z,1478888831.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:11.748Z,1478888831.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:12.161Z,1478888832.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:12.356Z,1478888832.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:12.523Z,1478888832.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:12.764Z,1478888832.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:12.939Z,1478888832.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:13.335Z,1478888833.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:13.560Z,1478888833.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:13.729Z,1478888833.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:14.158Z,1478888834.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:14.356Z,1478888834.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:14.538Z,1478888834.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:14.764Z,1478888834.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:14.959Z,1478888834.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:15.354Z,1478888835.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:15.560Z,1478888835.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:15.761Z,1478888835.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:16.152Z,1478888836.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:16.356Z,1478888836.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:16.582Z,1478888836.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:16.764Z,1478888836.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:16.922Z,1478888836.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:17.344Z,1478888837.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:17.560Z,1478888837.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:17.743Z,1478888837.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:18.185Z,1478888838.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:18.359Z,1478888838.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:18.538Z,1478888838.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:18.844Z,1478888838.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:18.950Z,1478888838.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:19.353Z,1478888839.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:19.640Z,1478888839.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:19.777Z,1478888839.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:20.172Z,1478888840.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:20.436Z,1478888840.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:20.576Z,1478888840.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:20.942Z,1478888840.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:21.192Z,1478888841.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:21.338Z,1478888841.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:21.737Z,1478888841.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:21.988Z,1478888841.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:22.129Z,1478888842.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:22.542Z,1478888842.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:22.784Z,1478888842.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:22.918Z,1478888842.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:23.196Z,1478888843.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:23.328Z,1478888843.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:23.734Z,1478888843.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:23.992Z,1478888843.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:24.133Z,1478888844.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:24.570Z,1478888844.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:24.772Z,1478888844.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:24.942Z,1478888844.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:25.338Z,1478888845.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:25.568Z,1478888845.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:25.755Z,1478888845.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:26.120Z,1478888846.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:26.364Z,1478888846.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:26.529Z,1478888846.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:26.772Z,1478888846.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:26.940Z,1478888846.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:27.321Z,1478888847.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:27.568Z,1478888847.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:27.729Z,1478888847.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:28.129Z,1478888848.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:28.366Z,1478888848.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:28.533Z,1478888848.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:28.776Z,1478888848.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:28.933Z,1478888848.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:29.338Z,1478888849.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:29.572Z,1478888849.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:29.739Z,1478888849.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:30.369Z,1478888850.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:30.780Z,1478888850.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:31.576Z,1478888851.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:32.373Z,1478888852.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:32.824Z,1478888852.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:33.313Z,1478888853.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:33.441Z,1478888853.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:33.620Z,1478888853.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:33.813Z,1478888853.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:34.246Z,1478888854.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:34.416Z,1478888854.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:34.602Z,1478888854.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:35.014Z,1478888855.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:35.164Z,1478888855.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:35.433Z,1478888855.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:35.804Z,1478888855.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:35.960Z,1478888855.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:36.212Z,1478888856.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:36.613Z,1478888856.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:36.757Z,1478888856.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:37.004Z,1478888857.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:37.164Z,1478888857.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:37.406Z,1478888857.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:37.815Z,1478888857.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:37.960Z,1478888857.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:38.212Z,1478888858.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:38.630Z,1478888858.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:38.728Z,1478888858.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:39.004Z,1478888859.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:39.396Z,1478888859.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:39.524Z,1478888859.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:39.795Z,1478888859.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:40.198Z,1478888860.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:40.320Z,1478888860.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:40.605Z,1478888860.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:40.728Z,1478888860.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:41.065Z,1478888861.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:41.388Z,1478888861.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:41.524Z,1478888861.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:41.793Z,1478888861.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:42.315Z,1478888862.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:42.320Z,1478888862.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:42.600Z,1478888862.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:42.736Z,1478888862.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:43.003Z,1478888863.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:43.409Z,1478888863.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:43.532Z,1478888863.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:43.817Z,1478888863.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:44.262Z,1478888864.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:44.328Z,1478888864.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:44.609Z,1478888864.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:44.736Z,1478888864.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:45.001Z,1478888865.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:45.411Z,1478888865.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:45.532Z,1478888865.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:45.811Z,1478888865.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:46.239Z,1478888866.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:46.329Z,1478888866.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:46.616Z,1478888866.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:46.792Z,1478888866.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:47.019Z,1478888867.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:47.429Z,1478888867.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:47.588Z,1478888867.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:47.800Z,1478888867.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:48.202Z,1478888868.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:48.384Z,1478888868.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:48.646Z,1478888868.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:49.010Z,1478888869.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:49.152Z,1478888869.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:49.448Z,1478888869.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:49.826Z,1478888869.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:49.948Z,1478888869.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:50.204Z,1478888870.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:50.598Z,1478888870.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:50.744Z,1478888870.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:51.009Z,1478888871.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:51.408Z,1478888871.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:51.540Z,1478888871.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:51.813Z,1478888871.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:52.218Z,1478888872.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:52.336Z,1478888872.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:52.608Z,1478888872.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:53.008Z,1478888873.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:53.132Z,1478888873.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:53.416Z,1478888873.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:53.814Z,1478888873.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:53.928Z,1478888873.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:54.264Z,1478888874.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:54.616Z,1478888874.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:54.684Z,1478888874.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:55.017Z,1478888875.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:55.092Z,1478888875.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:55.420Z,1478888875.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:55.500Z,1478888875.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:55.801Z,1478888875.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:56.273Z,1478888876.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:56.296Z,1478888876.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:56.608Z,1478888876.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:56.708Z,1478888876.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:57.010Z,1478888877.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:57.410Z,1478888877.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:57.504Z,1478888877.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:57.793Z,1478888877.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:58.241Z,1478888878.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:58.300Z,1478888878.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:58.610Z,1478888878.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:58.708Z,1478888878.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:59.016Z,1478888879.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:59.425Z,1478888879.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:27:59.504Z,1478888879.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:27:59.813Z,1478888879.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:00.218Z,1478888880.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:00.305Z,1478888880.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:00.623Z,1478888880.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:00.768Z,1478888880.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:01.002Z,1478888881.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:01.401Z,1478888881.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:01.564Z,1478888881.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:01.814Z,1478888881.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:02.197Z,1478888882.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:02.360Z,1478888882.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:02.612Z,1478888882.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:03.014Z,1478888883.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:03.136Z,1478888883.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:03.408Z,1478888883.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:03.855Z,1478888883.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:03.932Z,1478888883.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:04.257Z,1478888884.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:04.624Z,1478888884.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:04.728Z,1478888884.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:05.033Z,1478888885.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:05.136Z,1478888885.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:05.417Z,1478888885.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:05.804Z,1478888885.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:05.932Z,1478888885.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:06.245Z,1478888886.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:06.606Z,1478888886.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:06.704Z,1478888886.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:06.998Z,1478888886.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:07.403Z,1478888887.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:07.500Z,1478888887.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:07.800Z,1478888887.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:08.260Z,1478888888.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:08.296Z,1478888888.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:08.614Z,1478888888.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:08.704Z,1478888888.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:09.014Z,1478888889.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:09.414Z,1478888889.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:09.500Z,1478888889.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:09.833Z,1478888889.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:10.269Z,1478888890.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:10.296Z,1478888890.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:10.600Z,1478888890.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:10.724Z,1478888890.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:10.999Z,1478888890.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:11.429Z,1478888891.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:11.520Z,1478888891.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:11.803Z,1478888891.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:12.261Z,1478888892.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:12.316Z,1478888892.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:12.610Z,1478888892.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:12.724Z,1478888892.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:13.015Z,1478888893.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:13.414Z,1478888893.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:13.520Z,1478888893.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:13.816Z,1478888893.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:14.214Z,1478888894.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:14.317Z,1478888894.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:14.625Z,1478888894.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:14.740Z,1478888894.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:15.008Z,1478888895.008 [PNI_TCM](ERROR): CRC does not match. Expected:0x22429 got:0x6591
2016-11-11T18:28:15.041Z,1478888895.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:15.449Z,1478888895.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:15.536Z,1478888895.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:15.806Z,1478888895.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:16.210Z,1478888896.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:16.333Z,1478888896.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:16.670Z,1478888896.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:16.999Z,1478888897.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:17.124Z,1478888897.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:17.411Z,1478888897.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:17.833Z,1478888897.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:17.921Z,1478888897.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:18.203Z,1478888898.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:18.656Z,1478888898.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:18.716Z,1478888898.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:19.025Z,1478888899.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:19.128Z,1478888899.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:19.429Z,1478888899.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:19.802Z,1478888899.802 [PNI_TCM](ERROR): CRC does not match. Expected:0x24996 got:0x36891
2016-11-11T18:28:19.822Z,1478888899.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:19.924Z,1478888899.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:20.232Z,1478888900.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:20.622Z,1478888900.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:20.684Z,1478888900.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:21.008Z,1478888901.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:21.404Z,1478888901.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:21.480Z,1478888901.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:21.791Z,1478888901.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:22.242Z,1478888902.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:22.276Z,1478888902.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:22.617Z,1478888902.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:22.684Z,1478888902.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:23.002Z,1478888903.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:23.406Z,1478888903.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:23.480Z,1478888903.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:23.798Z,1478888903.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:24.237Z,1478888904.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:24.276Z,1478888904.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:24.630Z,1478888904.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:24.684Z,1478888904.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:25.010Z,1478888905.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:25.419Z,1478888905.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:25.480Z,1478888905.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:25.858Z,1478888905.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:26.236Z,1478888906.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:26.277Z,1478888906.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:26.612Z,1478888906.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:26.684Z,1478888906.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:27.013Z,1478888907.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:27.413Z,1478888907.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:27.480Z,1478888907.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:27.811Z,1478888907.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:28.207Z,1478888908.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:28.277Z,1478888908.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:28.604Z,1478888908.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:28.732Z,1478888908.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:29.021Z,1478888909.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:29.425Z,1478888909.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:29.528Z,1478888909.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:29.802Z,1478888909.802 [PNI_TCM](ERROR): CRC does not match. Expected:0x44011 got:0x28167
2016-11-11T18:28:29.825Z,1478888909.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:30.324Z,1478888910.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:31.084Z,1478888911.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:31.880Z,1478888911.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:32.676Z,1478888912.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:33.084Z,1478888913.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:33.390Z,1478888913.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:33.541Z,1478888913.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:33.880Z,1478888913.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:33.901Z,1478888913.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:34.299Z,1478888914.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:34.592Z,1478888914.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:34.701Z,1478888914.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:35.117Z,1478888915.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:35.388Z,1478888915.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:35.501Z,1478888915.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:35.931Z,1478888915.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:36.185Z,1478888916.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:36.334Z,1478888916.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:36.592Z,1478888916.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:36.696Z,1478888916.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:37.098Z,1478888917.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:37.388Z,1478888917.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:37.494Z,1478888917.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:37.921Z,1478888917.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:38.184Z,1478888918.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:38.291Z,1478888918.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:38.592Z,1478888918.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:38.695Z,1478888918.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:39.122Z,1478888919.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:39.388Z,1478888919.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:39.493Z,1478888919.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:39.893Z,1478888919.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:40.184Z,1478888920.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:40.293Z,1478888920.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:40.592Z,1478888920.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:40.693Z,1478888920.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:41.091Z,1478888921.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:41.388Z,1478888921.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:41.490Z,1478888921.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:41.900Z,1478888921.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:42.184Z,1478888922.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:42.315Z,1478888922.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:42.740Z,1478888922.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:42.745Z,1478888922.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:43.108Z,1478888923.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:43.507Z,1478888923.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:43.536Z,1478888923.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:43.914Z,1478888923.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:44.308Z,1478888924.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:44.332Z,1478888924.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:44.710Z,1478888924.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:45.066Z,1478888925.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:45.104Z,1478888925.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:45.493Z,1478888925.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:45.860Z,1478888925.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:45.913Z,1478888925.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:46.301Z,1478888926.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:46.656Z,1478888926.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:46.730Z,1478888926.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:47.064Z,1478888927.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:47.108Z,1478888927.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:47.503Z,1478888927.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:47.860Z,1478888927.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:47.913Z,1478888927.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:48.346Z,1478888928.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:48.572Z,1478888928.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:48.745Z,1478888928.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:49.095Z,1478888929.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:49.368Z,1478888929.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:49.516Z,1478888929.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:49.897Z,1478888929.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:50.164Z,1478888930.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:50.317Z,1478888930.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:50.572Z,1478888930.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:50.689Z,1478888930.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:51.091Z,1478888931.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:51.368Z,1478888931.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:51.482Z,1478888931.482 [BPC1](ERROR): Failed to receive battery data
2016-11-11T18:28:51.482Z,1478888931.482 [BPC1] Communications Fault, FailCount= 1
2016-11-11T18:28:51.482Z,1478888931.482 [BPC1](ERROR): Communications Fault
2016-11-11T18:28:51.494Z,1478888931.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:51.539Z,1478888931.539 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T18:28:51.902Z,1478888931.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:52.164Z,1478888932.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:52.300Z,1478888932.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:52.572Z,1478888932.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:52.700Z,1478888932.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:52.720Z,1478888932.720 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:28:52.720Z,1478888932.720 [BPC1] No Fault, FailCount= 1
2016-11-11T18:28:53.149Z,1478888933.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:53.368Z,1478888933.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:53.507Z,1478888933.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:53.952Z,1478888933.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:54.164Z,1478888934.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:54.312Z,1478888934.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:54.572Z,1478888934.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:54.705Z,1478888934.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:55.105Z,1478888935.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:55.368Z,1478888935.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:55.494Z,1478888935.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:55.906Z,1478888935.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:56.164Z,1478888936.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:56.317Z,1478888936.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:56.682Z,1478888936.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:56.704Z,1478888936.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:57.114Z,1478888937.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:57.482Z,1478888937.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:57.500Z,1478888937.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:57.909Z,1478888937.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:58.285Z,1478888938.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:58.304Z,1478888938.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:58.711Z,1478888938.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:59.024Z,1478888939.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:59.123Z,1478888939.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:59.525Z,1478888939.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:28:59.820Z,1478888939.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:28:59.917Z,1478888939.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:00.290Z,1478888940.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:00.617Z,1478888940.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:00.704Z,1478888940.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:01.024Z,1478888941.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:01.096Z,1478888941.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:01.501Z,1478888941.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:01.820Z,1478888941.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:01.892Z,1478888941.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:02.290Z,1478888942.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:02.548Z,1478888942.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:02.701Z,1478888942.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:03.103Z,1478888943.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:03.344Z,1478888943.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:03.510Z,1478888943.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:03.908Z,1478888943.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:04.141Z,1478888944.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:04.320Z,1478888944.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:04.552Z,1478888944.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:04.720Z,1478888944.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:05.138Z,1478888945.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:05.348Z,1478888945.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:05.529Z,1478888945.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:05.918Z,1478888945.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:06.144Z,1478888946.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:06.306Z,1478888946.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:06.552Z,1478888946.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:06.730Z,1478888946.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:07.105Z,1478888947.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:07.348Z,1478888947.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:07.530Z,1478888947.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:07.914Z,1478888947.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:08.144Z,1478888948.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:08.298Z,1478888948.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:08.552Z,1478888948.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:08.700Z,1478888948.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:09.110Z,1478888949.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:09.348Z,1478888949.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:09.509Z,1478888949.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:09.902Z,1478888949.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:10.144Z,1478888950.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:10.326Z,1478888950.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:10.664Z,1478888950.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:10.696Z,1478888950.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:11.111Z,1478888951.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:11.462Z,1478888951.462 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:11.484Z,1478888951.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:11.889Z,1478888951.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:12.256Z,1478888952.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:12.316Z,1478888952.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:12.705Z,1478888952.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:13.004Z,1478888953.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:13.100Z,1478888953.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:13.495Z,1478888953.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:13.800Z,1478888953.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:13.892Z,1478888953.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:14.302Z,1478888954.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:14.596Z,1478888954.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:14.706Z,1478888954.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:15.004Z,1478888955.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:15.113Z,1478888955.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:15.506Z,1478888955.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:15.800Z,1478888955.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:15.900Z,1478888955.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:16.329Z,1478888956.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:16.528Z,1478888956.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:16.718Z,1478888956.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:17.093Z,1478888957.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:17.324Z,1478888957.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:17.497Z,1478888957.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:17.891Z,1478888957.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:18.121Z,1478888958.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:18.301Z,1478888958.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:18.528Z,1478888958.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:18.697Z,1478888958.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:19.097Z,1478888959.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:19.324Z,1478888959.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:19.509Z,1478888959.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:19.922Z,1478888959.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:20.120Z,1478888960.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:20.348Z,1478888960.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:20.530Z,1478888960.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:20.707Z,1478888960.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:21.105Z,1478888961.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:21.324Z,1478888961.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:21.502Z,1478888961.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:21.917Z,1478888961.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:22.120Z,1478888962.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:22.317Z,1478888962.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:22.528Z,1478888962.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:22.682Z,1478888962.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:23.079Z,1478888963.079 [BPC1](ERROR): Failed to receive battery data
2016-11-11T18:29:23.080Z,1478888963.080 [BPC1] Communications Fault, FailCount= 1
2016-11-11T18:29:23.080Z,1478888963.080 [BPC1](ERROR): Communications Fault
2016-11-11T18:29:23.101Z,1478888963.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:23.139Z,1478888963.139 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T18:29:23.324Z,1478888963.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:23.497Z,1478888963.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:23.902Z,1478888963.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:24.122Z,1478888964.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:24.300Z,1478888964.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:24.329Z,1478888964.329 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:29:24.329Z,1478888964.329 [BPC1] No Fault, FailCount= 1
2016-11-11T18:29:24.620Z,1478888964.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:24.750Z,1478888964.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:25.132Z,1478888965.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:25.416Z,1478888965.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:25.509Z,1478888965.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:25.913Z,1478888965.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:26.212Z,1478888966.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:26.294Z,1478888966.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:26.704Z,1478888966.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:26.976Z,1478888966.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:27.105Z,1478888967.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:27.482Z,1478888967.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:27.772Z,1478888967.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:27.882Z,1478888967.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:28.287Z,1478888968.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:28.569Z,1478888968.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:28.690Z,1478888968.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:28.980Z,1478888968.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:29.089Z,1478888969.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:29.098Z,1478888969.098 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T18:24:28.9Z
2016-11-11T18:29:29.098Z,1478888969.098 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T18:29:29.098Z,1478888969.098 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T18:29:29.509Z,1478888969.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:29.776Z,1478888969.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:30.411Z,1478888970.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:30.524Z,1478888970.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:31.320Z,1478888971.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:32.116Z,1478888972.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:32.532Z,1478888972.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:33.328Z,1478888973.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:33.700Z,1478888973.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:33.753Z,1478888973.753 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0316.lzma
2016-11-11T18:29:33.845Z,1478888973.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:34.144Z,1478888974.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:34.220Z,1478888974.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:34.530Z,1478888974.530 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0316.lzma.bak
2016-11-11T18:29:34.530Z,1478888974.530 [DataOverHttps](INFO): SBD MOMSN=4555652
2016-11-11T18:29:34.552Z,1478888974.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:34.601Z,1478888974.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:35.348Z,1478888975.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:35.909Z,1478888975.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:36.066Z,1478888976.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:36.144Z,1478888976.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:36.552Z,1478888976.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:37.348Z,1478888977.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:38.145Z,1478888978.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:38.620Z,1478888978.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:39.416Z,1478888979.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:39.574Z,1478888979.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:39.723Z,1478888979.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:40.121Z,1478888980.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:40.212Z,1478888980.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:40.581Z,1478888980.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:40.895Z,1478888980.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:40.952Z,1478888980.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:41.293Z,1478888981.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:41.748Z,1478888981.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:42.544Z,1478888982.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:42.952Z,1478888982.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:43.748Z,1478888983.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:44.492Z,1478888984.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:44.704Z,1478888984.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:44.780Z,1478888984.780 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20161111T044527/Express0317.lzma
2016-11-11T18:29:44.862Z,1478888984.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:45.237Z,1478888985.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:45.288Z,1478888985.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:45.569Z,1478888985.569 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0317.lzma.bak
2016-11-11T18:29:45.570Z,1478888985.570 [DataOverHttps](INFO): SBD MOMSN=4555654
2016-11-11T18:29:45.630Z,1478888985.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:46.084Z,1478888986.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:46.492Z,1478888986.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:46.981Z,1478888986.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:46.989Z,1478888986.990 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T18:29:46.989Z,1478888986.990 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T18:29:46.990Z,1478888986.990 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T18:29:47.120Z,1478888987.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:47.288Z,1478888987.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:48.084Z,1478888988.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:48.492Z,1478888988.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:49.288Z,1478888989.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:50.084Z,1478888990.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:50.492Z,1478888990.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:50.692Z,1478888990.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:50.837Z,1478888990.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:51.233Z,1478888991.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:51.288Z,1478888991.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:51.601Z,1478888991.601 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T18:29:51.601Z,1478888991.601 [BPC1] Data Fault, FailCount= 1
2016-11-11T18:29:51.601Z,1478888991.601 [BPC1](ERROR): Data Fault
2016-11-11T18:29:51.613Z,1478888991.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:51.684Z,1478888991.684 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T18:29:51.999Z,1478888991.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:52.084Z,1478888992.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:52.404Z,1478888992.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:52.560Z,1478888992.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:52.801Z,1478888992.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:52.825Z,1478888992.825 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:29:52.825Z,1478888992.825 [BPC1] No Fault, FailCount= 1
2016-11-11T18:29:53.253Z,1478888993.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:53.356Z,1478888993.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:53.601Z,1478888993.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:54.018Z,1478888994.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:54.152Z,1478888994.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:54.400Z,1478888994.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:54.810Z,1478888994.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:54.932Z,1478888994.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:55.182Z,1478888995.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:55.593Z,1478888995.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:55.728Z,1478888995.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:55.990Z,1478888995.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:56.387Z,1478888996.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:56.524Z,1478888996.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:56.797Z,1478888996.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:56.936Z,1478888996.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:57.196Z,1478888997.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:57.598Z,1478888997.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:57.732Z,1478888997.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:58.041Z,1478888998.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:58.401Z,1478888998.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:58.480Z,1478888998.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:58.805Z,1478888998.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:59.183Z,1478888999.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:29:59.276Z,1478888999.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:29:59.586Z,1478888999.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:00.046Z,1478889000.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:00.072Z,1478889000.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:00.404Z,1478889000.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:00.504Z,1478889000.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:00.793Z,1478889000.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:01.197Z,1478889001.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:01.300Z,1478889001.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:01.590Z,1478889001.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:02.045Z,1478889002.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:02.096Z,1478889002.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:02.399Z,1478889002.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:02.504Z,1478889002.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:02.805Z,1478889002.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:03.203Z,1478889003.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:03.300Z,1478889003.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:03.609Z,1478889003.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:03.949Z,1478889003.949 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T18:30:04.039Z,1478889004.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:04.096Z,1478889004.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:04.409Z,1478889004.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:04.504Z,1478889004.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:04.833Z,1478889004.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:05.186Z,1478889005.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:05.300Z,1478889005.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:05.597Z,1478889005.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:06.010Z,1478889006.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:06.096Z,1478889006.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:06.390Z,1478889006.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:06.556Z,1478889006.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:06.789Z,1478889006.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:07.221Z,1478889007.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:07.352Z,1478889007.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:07.592Z,1478889007.592 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:07.592Z,1478889007.592 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 253
2016-11-11T18:30:07.592Z,1478889007.592 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:30:07.599Z,1478889007.599 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:07.600Z,1478889007.599 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 253
2016-11-11T18:30:07.600Z,1478889007.599 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:30:07.601Z,1478889007.602 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:07.602Z,1478889007.602 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 253
2016-11-11T18:30:07.602Z,1478889007.602 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:30:07.616Z,1478889007.616 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:30:07.616Z,1478889007.616 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:30:07.617Z,1478889007.617 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:30:08.026Z,1478889008.026 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:30:08.026Z,1478889008.026 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 253
2016-11-11T18:30:08.027Z,1478889008.027 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:30:08.027Z,1478889008.027 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 253
2016-11-11T18:30:08.027Z,1478889008.027 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:30:08.028Z,1478889008.028 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 253
2016-11-11T18:30:08.148Z,1478889008.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:08.416Z,1478889008.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:30:08.416Z,1478889008.416 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:30:08.417Z,1478889008.417 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:30:08.421Z,1478889008.421 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:30:08.422Z,1478889008.422 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:30:08.422Z,1478889008.422 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:30:08.423Z,1478889008.423 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:30:08.456Z,1478889008.456 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:30:08.456Z,1478889008.456 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:30:08.798Z,1478889008.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:08.932Z,1478889008.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:09.206Z,1478889009.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:09.548Z,1478889009.548 [NAL9602](INFO): Powering down
2016-11-11T18:30:09.582Z,1478889009.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:09.729Z,1478889009.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:10.003Z,1478889010.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:10.391Z,1478889010.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:10.524Z,1478889010.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:10.792Z,1478889010.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:10.932Z,1478889010.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:11.188Z,1478889011.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:11.597Z,1478889011.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:11.728Z,1478889011.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:12.044Z,1478889012.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:12.405Z,1478889012.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:12.460Z,1478889012.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:12.810Z,1478889012.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:13.197Z,1478889013.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:13.256Z,1478889013.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:13.598Z,1478889013.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:14.052Z,1478889014.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:14.078Z,1478889014.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:14.415Z,1478889014.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:14.520Z,1478889014.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:14.789Z,1478889014.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:15.186Z,1478889015.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:15.316Z,1478889015.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:15.587Z,1478889015.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:16.040Z,1478889016.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:16.112Z,1478889016.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:16.397Z,1478889016.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:16.788Z,1478889016.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:16.908Z,1478889016.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:17.186Z,1478889017.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:17.600Z,1478889017.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:17.704Z,1478889017.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:17.999Z,1478889018.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:18.380Z,1478889018.381 [BPC1](ERROR): Failed to parse message.
2016-11-11T18:30:18.381Z,1478889018.381 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T18:30:18.381Z,1478889018.381 [BPC1] Data Fault, FailCount= 1
2016-11-11T18:30:18.381Z,1478889018.381 [BPC1](ERROR): Data Fault
2016-11-11T18:30:18.389Z,1478889018.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:18.410Z,1478889018.410 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T18:30:18.500Z,1478889018.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:18.786Z,1478889018.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:19.199Z,1478889019.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:19.296Z,1478889019.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:19.588Z,1478889019.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:19.608Z,1478889019.608 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:30:19.608Z,1478889019.608 [BPC1] No Fault, FailCount= 1
2016-11-11T18:30:20.037Z,1478889020.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:20.093Z,1478889020.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:20.447Z,1478889020.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:20.798Z,1478889020.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:20.888Z,1478889020.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:21.193Z,1478889021.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:21.591Z,1478889021.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:21.684Z,1478889021.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:21.982Z,1478889021.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:22.397Z,1478889022.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:22.480Z,1478889022.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:22.788Z,1478889022.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:23.183Z,1478889023.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:23.276Z,1478889023.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:23.585Z,1478889023.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:23.997Z,1478889023.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:24.072Z,1478889024.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:24.387Z,1478889024.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:24.826Z,1478889024.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:24.868Z,1478889024.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:25.189Z,1478889025.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:25.598Z,1478889025.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:25.664Z,1478889025.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:25.993Z,1478889025.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:26.383Z,1478889026.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:26.460Z,1478889026.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:26.782Z,1478889026.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:27.205Z,1478889027.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:27.256Z,1478889027.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:27.575Z,1478889027.575 [PNI_TCM](ERROR): CRC does not match. Expected:0x9626 got:0x6335
2016-11-11T18:30:27.598Z,1478889027.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:27.998Z,1478889027.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:28.052Z,1478889028.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:28.393Z,1478889028.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:28.805Z,1478889028.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:28.848Z,1478889028.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:29.199Z,1478889029.198 [PNI_TCM](ERROR): CRC does not match. Expected:0x49681 got:0x13063
2016-11-11T18:30:29.221Z,1478889029.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:29.587Z,1478889029.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:29.644Z,1478889029.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:29.997Z,1478889029.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:30.394Z,1478889030.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:30.440Z,1478889030.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:30.777Z,1478889030.777 [PNI_TCM](ERROR): CRC does not match. Expected:0x16421 got:0x41241
2016-11-11T18:30:30.805Z,1478889030.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:31.209Z,1478889031.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:31.236Z,1478889031.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:31.589Z,1478889031.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:31.991Z,1478889031.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:32.032Z,1478889032.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:32.389Z,1478889032.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:32.782Z,1478889032.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:32.828Z,1478889032.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:33.183Z,1478889033.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:33.585Z,1478889033.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:33.624Z,1478889033.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:33.986Z,1478889033.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:34.389Z,1478889034.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:34.420Z,1478889034.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:34.793Z,1478889034.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:35.024Z,1478889035.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:35.182Z,1478889035.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:35.432Z,1478889035.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:35.579Z,1478889035.579 [BPC1](ERROR): Failed to receive battery data
2016-11-11T18:30:35.579Z,1478889035.579 [BPC1] Communications Fault, FailCount= 2
2016-11-11T18:30:35.579Z,1478889035.579 [BPC1](ERROR): Communications Fault
2016-11-11T18:30:35.587Z,1478889035.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:35.607Z,1478889035.607 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T18:30:35.840Z,1478889035.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:35.993Z,1478889035.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:36.248Z,1478889036.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:36.429Z,1478889036.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:36.660Z,1478889036.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:36.782Z,1478889036.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:36.812Z,1478889036.812 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:30:36.812Z,1478889036.812 [BPC1] No Fault, FailCount= 2
2016-11-11T18:30:37.068Z,1478889037.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:37.258Z,1478889037.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:37.476Z,1478889037.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:37.621Z,1478889037.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:37.884Z,1478889037.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:37.986Z,1478889037.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:38.292Z,1478889038.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:38.437Z,1478889038.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:38.700Z,1478889038.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:38.801Z,1478889038.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:39.108Z,1478889039.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:39.185Z,1478889039.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:39.516Z,1478889039.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:39.593Z,1478889039.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:40.004Z,1478889040.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:40.312Z,1478889040.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:40.394Z,1478889040.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:40.720Z,1478889040.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:40.820Z,1478889040.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:41.196Z,1478889041.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:41.516Z,1478889041.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:41.599Z,1478889041.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:42.012Z,1478889042.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:42.312Z,1478889042.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:42.397Z,1478889042.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:42.720Z,1478889042.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:42.799Z,1478889042.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:43.200Z,1478889043.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:43.516Z,1478889043.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:43.600Z,1478889043.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:44.019Z,1478889044.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:44.312Z,1478889044.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:44.405Z,1478889044.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:44.724Z,1478889044.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:44.804Z,1478889044.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:45.204Z,1478889045.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:45.520Z,1478889045.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:45.608Z,1478889045.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:46.010Z,1478889046.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:46.316Z,1478889046.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:46.394Z,1478889046.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:46.724Z,1478889046.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:46.793Z,1478889046.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:47.193Z,1478889047.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:47.520Z,1478889047.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:47.597Z,1478889047.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:48.316Z,1478889048.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:48.724Z,1478889048.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:49.520Z,1478889049.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:50.316Z,1478889050.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:50.848Z,1478889050.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:51.121Z,1478889051.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:51.244Z,1478889051.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:51.644Z,1478889051.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:51.644Z,1478889051.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:52.054Z,1478889052.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:52.440Z,1478889052.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:52.451Z,1478889052.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:52.861Z,1478889052.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:52.892Z,1478889052.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:53.261Z,1478889053.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:53.653Z,1478889053.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:53.688Z,1478889053.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:54.057Z,1478889054.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:54.360Z,1478889054.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:54.453Z,1478889054.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:54.832Z,1478889054.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:55.156Z,1478889055.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:55.235Z,1478889055.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:55.632Z,1478889055.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:55.953Z,1478889055.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:56.049Z,1478889056.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:56.364Z,1478889056.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:56.433Z,1478889056.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:56.851Z,1478889056.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:57.161Z,1478889057.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:57.234Z,1478889057.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:57.637Z,1478889057.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:57.956Z,1478889057.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:58.046Z,1478889058.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:58.368Z,1478889058.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:58.441Z,1478889058.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:58.832Z,1478889058.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:59.166Z,1478889059.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:30:59.245Z,1478889059.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:59.634Z,1478889059.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:30:59.960Z,1478889059.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:00.046Z,1478889060.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:00.372Z,1478889060.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:00.441Z,1478889060.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:00.834Z,1478889060.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:01.170Z,1478889061.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:01.246Z,1478889061.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:01.641Z,1478889061.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:01.964Z,1478889061.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:02.100Z,1478889062.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:02.439Z,1478889062.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:02.492Z,1478889062.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:02.838Z,1478889062.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:03.240Z,1478889063.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:03.288Z,1478889063.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:03.643Z,1478889063.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:04.065Z,1478889064.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:04.084Z,1478889064.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:04.465Z,1478889064.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:04.850Z,1478889064.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:04.856Z,1478889064.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:05.269Z,1478889065.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:05.629Z,1478889065.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:05.652Z,1478889065.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:06.031Z,1478889066.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:06.448Z,1478889066.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:06.484Z,1478889066.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:06.831Z,1478889066.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:06.864Z,1478889066.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:07.254Z,1478889067.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:07.660Z,1478889067.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:07.670Z,1478889067.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:08.032Z,1478889068.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:08.336Z,1478889068.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:08.449Z,1478889068.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:08.841Z,1478889068.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:09.132Z,1478889069.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:09.240Z,1478889069.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:09.637Z,1478889069.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:09.929Z,1478889069.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:10.045Z,1478889070.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:10.352Z,1478889070.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:10.434Z,1478889070.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:10.842Z,1478889070.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:11.148Z,1478889071.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:11.246Z,1478889071.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:11.637Z,1478889071.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:11.944Z,1478889071.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:12.057Z,1478889072.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:12.352Z,1478889072.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:12.433Z,1478889072.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:12.832Z,1478889072.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:13.149Z,1478889073.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:13.233Z,1478889073.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:13.637Z,1478889073.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:13.944Z,1478889073.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:14.040Z,1478889074.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:14.352Z,1478889074.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:14.437Z,1478889074.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:14.832Z,1478889074.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:15.148Z,1478889075.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:15.242Z,1478889075.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:15.637Z,1478889075.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:15.944Z,1478889075.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:16.084Z,1478889076.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:16.424Z,1478889076.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:16.484Z,1478889076.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:16.829Z,1478889076.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:17.232Z,1478889077.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:17.280Z,1478889077.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:17.632Z,1478889077.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:18.065Z,1478889078.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:18.076Z,1478889078.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:18.449Z,1478889078.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:18.816Z,1478889078.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:18.832Z,1478889078.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:19.236Z,1478889079.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:19.612Z,1478889079.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:19.689Z,1478889079.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:20.033Z,1478889080.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:20.409Z,1478889080.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:20.485Z,1478889080.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:20.816Z,1478889080.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:20.844Z,1478889080.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:21.265Z,1478889081.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:21.612Z,1478889081.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:21.654Z,1478889081.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:22.043Z,1478889082.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:22.316Z,1478889082.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:22.445Z,1478889082.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:22.824Z,1478889082.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:23.112Z,1478889083.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:23.224Z,1478889083.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:23.624Z,1478889083.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:23.908Z,1478889083.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:24.030Z,1478889084.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:24.316Z,1478889084.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:24.429Z,1478889084.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:24.831Z,1478889084.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:25.112Z,1478889085.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:25.237Z,1478889085.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:25.631Z,1478889085.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:25.908Z,1478889085.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:26.041Z,1478889086.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:26.332Z,1478889086.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:26.441Z,1478889086.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:26.840Z,1478889086.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:27.128Z,1478889087.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:27.233Z,1478889087.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:27.641Z,1478889087.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:27.924Z,1478889087.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:28.034Z,1478889088.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:28.332Z,1478889088.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:28.433Z,1478889088.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:28.840Z,1478889088.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:29.128Z,1478889089.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:29.238Z,1478889089.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:29.640Z,1478889089.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:29.924Z,1478889089.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:30.056Z,1478889090.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:30.445Z,1478889090.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:30.456Z,1478889090.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:30.848Z,1478889090.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:31.233Z,1478889091.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:31.252Z,1478889091.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:31.629Z,1478889091.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:32.037Z,1478889092.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:32.048Z,1478889092.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:32.450Z,1478889092.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:32.768Z,1478889092.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:32.848Z,1478889092.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:33.234Z,1478889093.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:33.566Z,1478889093.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:33.669Z,1478889093.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:34.029Z,1478889094.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:34.360Z,1478889094.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:34.469Z,1478889094.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:34.768Z,1478889094.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:34.841Z,1478889094.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:35.262Z,1478889095.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:35.564Z,1478889095.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:35.640Z,1478889095.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:36.054Z,1478889096.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:36.308Z,1478889096.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:36.431Z,1478889096.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:36.839Z,1478889096.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:37.104Z,1478889097.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:37.237Z,1478889097.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:37.642Z,1478889097.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:37.900Z,1478889097.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:38.045Z,1478889098.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:38.308Z,1478889098.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:38.439Z,1478889098.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:38.842Z,1478889098.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:39.104Z,1478889099.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:39.233Z,1478889099.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:39.641Z,1478889099.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:39.900Z,1478889099.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:40.041Z,1478889100.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:40.308Z,1478889100.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:40.432Z,1478889100.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:40.841Z,1478889100.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:41.104Z,1478889101.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:41.242Z,1478889101.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:41.639Z,1478889101.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:41.900Z,1478889101.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:42.032Z,1478889102.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:42.308Z,1478889102.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:42.449Z,1478889102.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:42.840Z,1478889102.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:43.104Z,1478889103.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:43.240Z,1478889103.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:43.644Z,1478889103.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:43.900Z,1478889103.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:44.058Z,1478889104.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:44.404Z,1478889104.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:44.445Z,1478889104.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:44.849Z,1478889104.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:45.202Z,1478889105.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:45.250Z,1478889105.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:45.648Z,1478889105.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:45.996Z,1478889105.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:46.053Z,1478889106.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:46.438Z,1478889106.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:46.744Z,1478889106.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:46.833Z,1478889106.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:47.270Z,1478889107.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:47.540Z,1478889107.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:47.633Z,1478889107.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:48.337Z,1478889108.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:48.764Z,1478889108.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:49.560Z,1478889109.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:50.284Z,1478889110.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:51.080Z,1478889111.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:51.126Z,1478889111.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:51.241Z,1478889111.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:51.641Z,1478889111.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:51.876Z,1478889111.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:52.029Z,1478889112.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:52.284Z,1478889112.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:52.437Z,1478889112.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:52.836Z,1478889112.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:53.080Z,1478889113.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:53.235Z,1478889113.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:53.614Z,1478889113.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:53.876Z,1478889113.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:54.057Z,1478889114.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:54.300Z,1478889114.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:54.437Z,1478889114.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:54.827Z,1478889114.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:55.096Z,1478889115.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:55.240Z,1478889115.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:55.628Z,1478889115.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:55.892Z,1478889115.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:56.036Z,1478889116.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:56.300Z,1478889116.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:56.434Z,1478889116.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:56.844Z,1478889116.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:57.096Z,1478889117.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:57.222Z,1478889117.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:57.622Z,1478889117.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:57.892Z,1478889117.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:58.061Z,1478889118.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:58.410Z,1478889118.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:58.428Z,1478889118.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:58.838Z,1478889118.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:59.224Z,1478889119.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:31:59.238Z,1478889119.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:31:59.610Z,1478889119.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:00.013Z,1478889120.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:00.020Z,1478889120.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:00.417Z,1478889120.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:00.740Z,1478889120.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:00.826Z,1478889120.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:01.234Z,1478889121.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:01.536Z,1478889121.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:01.638Z,1478889121.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:02.007Z,1478889122.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:02.334Z,1478889122.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:02.430Z,1478889122.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:02.744Z,1478889122.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:02.844Z,1478889122.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:03.217Z,1478889123.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:03.540Z,1478889123.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:03.637Z,1478889123.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:04.026Z,1478889124.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:04.252Z,1478889124.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:04.404Z,1478889124.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:04.873Z,1478889124.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:05.048Z,1478889125.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:05.218Z,1478889125.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:05.626Z,1478889125.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:05.846Z,1478889125.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:06.060Z,1478889126.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:06.257Z,1478889126.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:06.436Z,1478889126.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:06.834Z,1478889126.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:07.052Z,1478889127.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:07.272Z,1478889127.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:07.631Z,1478889127.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:07.848Z,1478889127.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:08.040Z,1478889128.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:08.260Z,1478889128.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:08.434Z,1478889128.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:08.829Z,1478889128.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:09.056Z,1478889129.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:09.218Z,1478889129.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:09.614Z,1478889129.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:09.852Z,1478889129.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:10.022Z,1478889130.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:10.282Z,1478889130.282 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:10.422Z,1478889130.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:10.818Z,1478889130.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:11.076Z,1478889131.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:11.225Z,1478889131.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:11.614Z,1478889131.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:11.873Z,1478889131.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:12.039Z,1478889132.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:12.385Z,1478889132.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:12.430Z,1478889132.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:12.826Z,1478889132.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:13.180Z,1478889133.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:13.230Z,1478889133.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:13.621Z,1478889133.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:13.983Z,1478889133.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:14.023Z,1478889134.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:14.414Z,1478889134.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:14.720Z,1478889134.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:14.828Z,1478889134.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:15.236Z,1478889135.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:15.517Z,1478889135.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:15.638Z,1478889135.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:16.010Z,1478889136.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:16.312Z,1478889136.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:16.418Z,1478889136.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:16.724Z,1478889136.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:16.819Z,1478889136.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:17.241Z,1478889137.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:17.520Z,1478889137.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:17.622Z,1478889137.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:18.037Z,1478889138.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:18.240Z,1478889138.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:18.446Z,1478889138.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:18.850Z,1478889138.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:19.037Z,1478889139.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:19.274Z,1478889139.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:19.688Z,1478889139.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:19.832Z,1478889139.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:20.034Z,1478889140.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:20.252Z,1478889140.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:20.438Z,1478889140.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:20.845Z,1478889140.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:21.048Z,1478889141.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:21.218Z,1478889141.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:21.633Z,1478889141.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:21.844Z,1478889141.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:22.003Z,1478889142.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:22.441Z,1478889142.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:22.640Z,1478889142.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:22.823Z,1478889142.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:23.204Z,1478889143.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:23.436Z,1478889143.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:23.610Z,1478889143.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:24.003Z,1478889144.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:24.232Z,1478889144.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:24.400Z,1478889144.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:24.804Z,1478889144.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:25.028Z,1478889145.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:25.205Z,1478889145.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:25.604Z,1478889145.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:25.824Z,1478889145.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:26.004Z,1478889146.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:26.403Z,1478889146.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:26.620Z,1478889146.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:26.805Z,1478889146.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:27.204Z,1478889147.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:27.416Z,1478889147.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:27.624Z,1478889147.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:28.004Z,1478889148.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:28.212Z,1478889148.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:28.409Z,1478889148.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:28.802Z,1478889148.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:29.008Z,1478889149.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:29.204Z,1478889149.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:29.609Z,1478889149.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:29.804Z,1478889149.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:30.009Z,1478889150.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:30.400Z,1478889150.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:30.600Z,1478889150.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:30.809Z,1478889150.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:31.213Z,1478889151.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:31.396Z,1478889151.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:31.613Z,1478889151.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:32.030Z,1478889152.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:32.192Z,1478889152.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:32.409Z,1478889152.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:32.804Z,1478889152.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:32.988Z,1478889152.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:33.200Z,1478889153.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:33.609Z,1478889153.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:33.785Z,1478889153.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:34.022Z,1478889154.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:34.429Z,1478889154.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:34.580Z,1478889154.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:34.813Z,1478889154.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:35.204Z,1478889155.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:35.376Z,1478889155.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:35.633Z,1478889155.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:36.008Z,1478889156.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:36.172Z,1478889156.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:36.433Z,1478889156.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:36.837Z,1478889156.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:36.968Z,1478889156.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:37.220Z,1478889157.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:37.604Z,1478889157.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:37.764Z,1478889157.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:38.004Z,1478889158.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:38.403Z,1478889158.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:38.561Z,1478889158.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:38.809Z,1478889158.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:39.204Z,1478889159.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:39.356Z,1478889159.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:39.603Z,1478889159.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:40.004Z,1478889160.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:40.152Z,1478889160.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:40.404Z,1478889160.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:40.799Z,1478889160.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:40.948Z,1478889160.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:41.209Z,1478889161.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:41.600Z,1478889161.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:41.744Z,1478889161.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:42.003Z,1478889162.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:42.469Z,1478889162.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:42.540Z,1478889162.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:42.804Z,1478889162.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:43.203Z,1478889163.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:43.336Z,1478889163.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:43.627Z,1478889163.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:43.796Z,1478889163.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:44.009Z,1478889164.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:44.204Z,1478889164.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:44.433Z,1478889164.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:44.616Z,1478889164.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:44.821Z,1478889164.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:45.024Z,1478889165.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:45.213Z,1478889165.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:45.432Z,1478889165.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:45.609Z,1478889165.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:45.840Z,1478889165.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:46.017Z,1478889166.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:46.248Z,1478889166.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:46.413Z,1478889166.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:46.656Z,1478889166.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:46.813Z,1478889166.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:47.064Z,1478889167.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:47.217Z,1478889167.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:47.472Z,1478889167.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:47.613Z,1478889167.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:47.880Z,1478889167.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:48.013Z,1478889168.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:48.288Z,1478889168.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:48.696Z,1478889168.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:49.104Z,1478889169.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:49.900Z,1478889169.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:50.320Z,1478889170.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:51.116Z,1478889171.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:51.916Z,1478889171.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:52.324Z,1478889172.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:52.885Z,1478889172.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:52.986Z,1478889172.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:53.120Z,1478889173.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:53.389Z,1478889173.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:53.842Z,1478889173.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:53.916Z,1478889173.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:54.186Z,1478889174.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:54.324Z,1478889174.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:54.606Z,1478889174.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:55.120Z,1478889175.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:55.136Z,1478889175.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:55.380Z,1478889175.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:55.787Z,1478889175.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:55.918Z,1478889175.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:56.238Z,1478889176.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:56.588Z,1478889176.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:56.652Z,1478889176.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:56.991Z,1478889176.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:57.394Z,1478889177.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:57.448Z,1478889177.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:57.792Z,1478889177.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:58.224Z,1478889178.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:58.244Z,1478889178.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:58.578Z,1478889178.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:58.668Z,1478889178.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:58.996Z,1478889178.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:59.381Z,1478889179.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:32:59.464Z,1478889179.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:32:59.781Z,1478889179.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:00.179Z,1478889180.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:00.212Z,1478889180.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:00.584Z,1478889180.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:00.988Z,1478889180.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:01.008Z,1478889181.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:01.380Z,1478889181.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:01.804Z,1478889181.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:01.810Z,1478889181.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:02.187Z,1478889182.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:02.212Z,1478889182.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:02.593Z,1478889182.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:02.976Z,1478889182.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:03.008Z,1478889183.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:03.379Z,1478889183.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:03.785Z,1478889183.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:03.804Z,1478889183.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:04.188Z,1478889184.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:04.212Z,1478889184.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:04.597Z,1478889184.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:04.984Z,1478889184.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:05.008Z,1478889185.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:05.396Z,1478889185.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:05.798Z,1478889185.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:05.804Z,1478889185.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:06.178Z,1478889186.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:06.212Z,1478889186.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:06.577Z,1478889186.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:06.985Z,1478889186.985 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T18:33:06.985Z,1478889186.985 [BPC1] Data Fault, FailCount= 1
2016-11-11T18:33:06.985Z,1478889186.985 [BPC1](ERROR): Data Fault
2016-11-11T18:33:07.008Z,1478889187.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:07.021Z,1478889187.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:07.077Z,1478889187.077 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T18:33:07.385Z,1478889187.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:07.804Z,1478889187.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:07.835Z,1478889187.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:08.179Z,1478889188.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:08.198Z,1478889188.198 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:33:08.198Z,1478889188.198 [BPC1] No Fault, FailCount= 1
2016-11-11T18:33:08.284Z,1478889188.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:08.633Z,1478889188.633 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:08.633Z,1478889188.633 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 254
2016-11-11T18:33:08.633Z,1478889188.634 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:33:08.640Z,1478889188.640 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:08.640Z,1478889188.640 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 254
2016-11-11T18:33:08.640Z,1478889188.640 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:33:08.642Z,1478889188.642 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:08.642Z,1478889188.642 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 254
2016-11-11T18:33:08.643Z,1478889188.643 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:33:08.677Z,1478889188.677 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:33:08.678Z,1478889188.678 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:33:08.678Z,1478889188.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:33:09.038Z,1478889189.038 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:33:09.038Z,1478889189.038 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 254
2016-11-11T18:33:09.039Z,1478889189.039 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:33:09.039Z,1478889189.039 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 254
2016-11-11T18:33:09.043Z,1478889189.043 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:33:09.044Z,1478889189.044 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 254
2016-11-11T18:33:09.080Z,1478889189.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:09.396Z,1478889189.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:33:09.397Z,1478889189.397 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:33:09.397Z,1478889189.397 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:33:09.402Z,1478889189.402 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:33:09.402Z,1478889189.402 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:33:09.403Z,1478889189.403 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:33:09.403Z,1478889189.403 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:33:09.404Z,1478889189.404 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:33:09.404Z,1478889189.404 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:33:09.798Z,1478889189.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:09.876Z,1478889189.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:10.217Z,1478889190.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:10.585Z,1478889190.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:10.660Z,1478889190.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:10.975Z,1478889190.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:11.380Z,1478889191.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:11.456Z,1478889191.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:11.785Z,1478889191.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:12.220Z,1478889192.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:12.252Z,1478889192.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:12.589Z,1478889192.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:12.660Z,1478889192.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:12.983Z,1478889192.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:13.380Z,1478889193.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:13.456Z,1478889193.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:13.793Z,1478889193.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:14.132Z,1478889194.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:14.186Z,1478889194.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:14.588Z,1478889194.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:14.928Z,1478889194.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:14.995Z,1478889194.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:15.389Z,1478889195.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:15.724Z,1478889195.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:15.808Z,1478889195.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:16.132Z,1478889196.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:16.188Z,1478889196.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:16.593Z,1478889196.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:16.928Z,1478889196.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:16.993Z,1478889196.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:17.392Z,1478889197.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:17.725Z,1478889197.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:17.789Z,1478889197.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:18.144Z,1478889198.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:18.191Z,1478889198.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:18.580Z,1478889198.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:18.940Z,1478889198.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:19.023Z,1478889199.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:19.381Z,1478889199.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:19.736Z,1478889199.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:19.786Z,1478889199.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:20.210Z,1478889200.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:20.540Z,1478889200.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:20.586Z,1478889200.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:20.950Z,1478889200.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:21.025Z,1478889201.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:21.381Z,1478889201.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:21.744Z,1478889201.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:21.863Z,1478889201.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:22.180Z,1478889202.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:22.252Z,1478889202.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:22.623Z,1478889202.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:22.981Z,1478889202.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:23.048Z,1478889203.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:23.426Z,1478889203.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:23.790Z,1478889203.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:23.844Z,1478889203.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:24.233Z,1478889204.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:24.591Z,1478889204.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:24.612Z,1478889204.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:25.020Z,1478889205.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:25.384Z,1478889205.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:25.408Z,1478889205.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:25.797Z,1478889205.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:26.204Z,1478889206.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:26.209Z,1478889206.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:26.577Z,1478889206.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:26.628Z,1478889206.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:26.977Z,1478889206.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:27.377Z,1478889207.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:27.424Z,1478889207.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:27.785Z,1478889207.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:28.112Z,1478889208.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:28.192Z,1478889208.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:28.585Z,1478889208.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:28.910Z,1478889208.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:28.981Z,1478889208.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:29.385Z,1478889209.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:29.704Z,1478889209.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:29.786Z,1478889209.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:30.116Z,1478889210.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:30.193Z,1478889210.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:30.589Z,1478889210.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:30.912Z,1478889210.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:30.983Z,1478889210.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:31.383Z,1478889211.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:31.709Z,1478889211.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:31.820Z,1478889211.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:32.120Z,1478889212.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:32.193Z,1478889212.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:32.588Z,1478889212.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:32.916Z,1478889212.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:32.987Z,1478889212.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:33.388Z,1478889213.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:33.712Z,1478889213.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:33.788Z,1478889213.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:34.120Z,1478889214.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:34.191Z,1478889214.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:34.593Z,1478889214.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:34.916Z,1478889214.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:34.988Z,1478889214.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:35.437Z,1478889215.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:35.712Z,1478889215.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:35.825Z,1478889215.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:36.214Z,1478889216.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:36.264Z,1478889216.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:36.585Z,1478889216.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:37.014Z,1478889217.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:37.060Z,1478889217.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:37.417Z,1478889217.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:37.785Z,1478889217.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:37.856Z,1478889217.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:38.208Z,1478889218.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:38.583Z,1478889218.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:38.600Z,1478889218.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:38.993Z,1478889218.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:39.388Z,1478889219.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:39.396Z,1478889219.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:39.781Z,1478889219.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:40.192Z,1478889220.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:40.205Z,1478889220.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:40.587Z,1478889220.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:40.600Z,1478889220.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:40.984Z,1478889220.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:41.391Z,1478889221.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:41.396Z,1478889221.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:41.790Z,1478889221.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:42.088Z,1478889222.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:42.191Z,1478889222.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:42.591Z,1478889222.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:42.884Z,1478889222.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:42.992Z,1478889222.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:43.392Z,1478889223.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:43.680Z,1478889223.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:43.791Z,1478889223.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:44.088Z,1478889224.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:44.192Z,1478889224.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:44.589Z,1478889224.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:44.884Z,1478889224.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:44.994Z,1478889224.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:45.376Z,1478889225.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:45.680Z,1478889225.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:45.777Z,1478889225.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:46.088Z,1478889226.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:46.179Z,1478889226.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:46.581Z,1478889226.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:46.884Z,1478889226.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:46.978Z,1478889226.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:47.378Z,1478889227.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:47.680Z,1478889227.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:47.789Z,1478889227.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:48.092Z,1478889228.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:48.180Z,1478889228.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:48.888Z,1478889228.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:49.684Z,1478889229.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:50.192Z,1478889230.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:50.988Z,1478889230.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:51.717Z,1478889231.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:51.784Z,1478889231.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:51.836Z,1478889231.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:52.238Z,1478889232.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:52.552Z,1478889232.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:52.624Z,1478889232.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:53.045Z,1478889233.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:53.350Z,1478889233.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:53.438Z,1478889233.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:53.833Z,1478889233.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:54.144Z,1478889234.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:54.224Z,1478889234.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:54.552Z,1478889234.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:54.627Z,1478889234.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:55.025Z,1478889235.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:55.348Z,1478889235.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:55.426Z,1478889235.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:55.828Z,1478889235.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:56.068Z,1478889236.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:56.225Z,1478889236.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:56.628Z,1478889236.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:56.864Z,1478889236.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:57.028Z,1478889237.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:57.422Z,1478889237.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:57.660Z,1478889237.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:57.832Z,1478889237.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:58.072Z,1478889238.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:58.233Z,1478889238.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:58.613Z,1478889238.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:58.868Z,1478889238.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:59.011Z,1478889239.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:59.414Z,1478889239.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:33:59.664Z,1478889239.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:33:59.820Z,1478889239.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:00.072Z,1478889240.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:00.215Z,1478889240.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:00.619Z,1478889240.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:00.868Z,1478889240.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:01.021Z,1478889241.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:01.421Z,1478889241.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:01.664Z,1478889241.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:01.816Z,1478889241.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:02.072Z,1478889242.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:02.219Z,1478889242.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:02.621Z,1478889242.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:02.868Z,1478889242.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:03.021Z,1478889243.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:03.421Z,1478889243.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:03.664Z,1478889243.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:03.826Z,1478889243.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:04.160Z,1478889244.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:04.225Z,1478889244.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:04.625Z,1478889244.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:04.956Z,1478889244.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:05.029Z,1478889245.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:05.457Z,1478889245.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:05.752Z,1478889245.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:05.858Z,1478889245.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:06.215Z,1478889246.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:06.516Z,1478889246.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:06.615Z,1478889246.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:07.038Z,1478889247.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:07.312Z,1478889247.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:07.415Z,1478889247.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:07.852Z,1478889247.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:08.108Z,1478889248.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:08.242Z,1478889248.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:08.516Z,1478889248.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:08.622Z,1478889248.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:09.017Z,1478889249.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:09.312Z,1478889249.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:09.417Z,1478889249.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:09.822Z,1478889249.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:10.044Z,1478889250.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:10.221Z,1478889250.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:10.625Z,1478889250.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:10.840Z,1478889250.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:11.024Z,1478889251.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:11.427Z,1478889251.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:11.637Z,1478889251.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:11.826Z,1478889251.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:12.044Z,1478889252.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:12.224Z,1478889252.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:12.627Z,1478889252.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:12.840Z,1478889252.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:13.028Z,1478889253.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:13.424Z,1478889253.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:13.636Z,1478889253.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:13.832Z,1478889253.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:14.044Z,1478889254.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:14.236Z,1478889254.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:14.608Z,1478889254.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:14.840Z,1478889254.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:15.013Z,1478889255.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:15.413Z,1478889255.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:15.636Z,1478889255.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:15.820Z,1478889255.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:16.044Z,1478889256.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:16.221Z,1478889256.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:16.621Z,1478889256.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:16.840Z,1478889256.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:17.021Z,1478889257.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:17.421Z,1478889257.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:17.636Z,1478889257.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:17.816Z,1478889257.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:18.136Z,1478889258.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:18.215Z,1478889258.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:18.621Z,1478889258.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:18.932Z,1478889258.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:19.022Z,1478889259.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:19.420Z,1478889259.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:19.728Z,1478889259.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:19.827Z,1478889259.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:20.225Z,1478889260.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:20.498Z,1478889260.498 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:20.681Z,1478889260.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:21.027Z,1478889261.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:21.292Z,1478889261.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:21.468Z,1478889261.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:21.822Z,1478889261.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:22.088Z,1478889262.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:22.232Z,1478889262.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:22.496Z,1478889262.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:22.641Z,1478889262.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:23.033Z,1478889263.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:23.292Z,1478889263.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:23.408Z,1478889263.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:23.812Z,1478889263.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:24.036Z,1478889264.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:24.212Z,1478889264.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:24.616Z,1478889264.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:24.834Z,1478889264.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:25.021Z,1478889265.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:25.414Z,1478889265.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:25.628Z,1478889265.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:25.820Z,1478889265.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:26.036Z,1478889266.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:26.215Z,1478889266.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:26.617Z,1478889266.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:26.832Z,1478889266.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:27.014Z,1478889267.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:27.421Z,1478889267.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:27.628Z,1478889267.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:27.816Z,1478889267.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:28.036Z,1478889268.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:28.218Z,1478889268.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:28.621Z,1478889268.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:28.832Z,1478889268.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:29.019Z,1478889269.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:29.421Z,1478889269.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:29.628Z,1478889269.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:29.830Z,1478889269.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:30.036Z,1478889270.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:30.220Z,1478889270.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:30.625Z,1478889270.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:30.832Z,1478889270.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:31.026Z,1478889271.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:31.418Z,1478889271.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:31.628Z,1478889271.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:31.830Z,1478889271.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:32.220Z,1478889272.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:32.424Z,1478889272.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:32.627Z,1478889272.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:33.025Z,1478889273.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:33.220Z,1478889273.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:33.429Z,1478889273.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:33.826Z,1478889273.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:34.021Z,1478889274.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:34.229Z,1478889274.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:34.452Z,1478889274.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:34.669Z,1478889274.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:35.014Z,1478889275.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:35.248Z,1478889275.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:35.444Z,1478889275.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:35.813Z,1478889275.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:36.045Z,1478889276.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:36.251Z,1478889276.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:36.456Z,1478889276.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:36.658Z,1478889276.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:37.021Z,1478889277.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:37.252Z,1478889277.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:37.415Z,1478889277.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:37.813Z,1478889277.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:37.972Z,1478889277.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:38.225Z,1478889278.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:38.618Z,1478889278.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:38.768Z,1478889278.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:39.029Z,1478889279.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:39.426Z,1478889279.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:39.564Z,1478889279.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:39.821Z,1478889279.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:39.976Z,1478889279.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:40.225Z,1478889280.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:40.621Z,1478889280.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:40.772Z,1478889280.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:41.016Z,1478889281.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:41.424Z,1478889281.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:41.569Z,1478889281.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:41.826Z,1478889281.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:41.980Z,1478889281.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:42.218Z,1478889282.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:42.629Z,1478889282.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:42.776Z,1478889282.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:43.036Z,1478889283.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:43.430Z,1478889283.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:43.573Z,1478889283.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:43.836Z,1478889283.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:43.984Z,1478889283.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:44.221Z,1478889284.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:44.615Z,1478889284.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:44.780Z,1478889284.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:45.019Z,1478889285.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:45.415Z,1478889285.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:45.576Z,1478889285.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:45.822Z,1478889285.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:46.072Z,1478889286.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:46.225Z,1478889286.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:46.618Z,1478889286.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:46.868Z,1478889286.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:47.023Z,1478889287.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:47.425Z,1478889287.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:47.434Z,1478889287.434 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T18:34:47.434Z,1478889287.434 [Default:CheckIn:C.Wait] Stopped
2016-11-11T18:34:47.434Z,1478889287.434 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T18:34:47.434Z,1478889287.434 [Default:CheckIn:D] Running Loop=1
2016-11-11T18:34:47.664Z,1478889287.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:47.814Z,1478889287.814 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T18:34:47.814Z,1478889287.814 [BPC1] Data Fault, FailCount= 1
2016-11-11T18:34:47.814Z,1478889287.814 [BPC1](ERROR): Data Fault
2016-11-11T18:34:47.842Z,1478889287.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:47.861Z,1478889287.861 [Default:CheckIn:D] Stopped
2016-11-11T18:34:47.862Z,1478889287.862 [Default:CheckIn:E] Running Loop=1
2016-11-11T18:34:47.878Z,1478889287.878 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T18:34:48.228Z,1478889288.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:48.237Z,1478889288.237 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 824.775846 min 
2016-11-11T18:34:48.238Z,1478889288.238 [Default:CheckIn:E] Stopped
2016-11-11T18:34:48.238Z,1478889288.238 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T18:34:48.238Z,1478889288.238 [Default:CheckIn] Stopped
2016-11-11T18:34:48.238Z,1478889288.238 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T18:34:48.238Z,1478889288.238 [Default:CheckIn](INFO): Running loop #80
2016-11-11T18:34:48.238Z,1478889288.238 [Default:CheckIn] Running Loop=80
2016-11-11T18:34:48.239Z,1478889288.239 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T18:34:48.239Z,1478889288.239 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T18:34:48.424Z,1478889288.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:49.220Z,1478889289.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:50.017Z,1478889290.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:50.432Z,1478889290.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:51.228Z,1478889291.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:51.641Z,1478889291.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:51.724Z,1478889291.724 [NAL9602](INFO): Powering up
2016-11-11T18:34:51.766Z,1478889291.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:51.808Z,1478889291.808 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:34:51.808Z,1478889291.809 [BPC1] No Fault, FailCount= 1
2016-11-11T18:34:51.960Z,1478889291.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:52.179Z,1478889292.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:52.542Z,1478889292.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:52.756Z,1478889292.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:52.907Z,1478889292.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:53.312Z,1478889293.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:53.553Z,1478889293.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:53.716Z,1478889293.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:53.964Z,1478889293.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:54.111Z,1478889294.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:54.515Z,1478889294.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:54.760Z,1478889294.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:54.910Z,1478889294.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:55.310Z,1478889295.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:55.557Z,1478889295.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:55.732Z,1478889295.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:55.968Z,1478889295.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:56.124Z,1478889296.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:56.520Z,1478889296.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:56.764Z,1478889296.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:56.924Z,1478889296.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:57.324Z,1478889297.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:57.561Z,1478889297.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:57.721Z,1478889297.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:57.972Z,1478889297.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:58.128Z,1478889298.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:58.525Z,1478889298.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:58.768Z,1478889298.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:58.924Z,1478889298.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:59.321Z,1478889299.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:34:59.564Z,1478889299.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:34:59.738Z,1478889299.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:00.052Z,1478889300.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:00.113Z,1478889300.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:00.517Z,1478889300.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:00.848Z,1478889300.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:00.917Z,1478889300.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:01.311Z,1478889301.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:01.644Z,1478889301.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:01.727Z,1478889301.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:02.112Z,1478889302.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:02.404Z,1478889302.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:02.526Z,1478889302.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:02.873Z,1478889302.873 [NAL9602](INFO): NAL9602 initialized
2016-11-11T18:35:02.926Z,1478889302.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:03.200Z,1478889303.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:03.321Z,1478889303.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:03.673Z,1478889303.673 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T18:35:03.673Z,1478889303.673 [NAL9602] Data Fault, FailCount= 2
2016-11-11T18:35:03.673Z,1478889303.673 [NAL9602](ERROR): Data Fault
2016-11-11T18:35:03.738Z,1478889303.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:03.779Z,1478889303.779 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T18:35:03.997Z,1478889303.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:04.072Z,1478889304.072 [NAL9602](INFO): Powering down
2016-11-11T18:35:04.138Z,1478889304.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:04.412Z,1478889304.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:04.553Z,1478889304.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:04.917Z,1478889304.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:04.974Z,1478889304.974 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T18:35:04.974Z,1478889304.974 [NAL9602] No Fault, FailCount= 2
2016-11-11T18:35:05.208Z,1478889305.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:05.347Z,1478889305.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:05.717Z,1478889305.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:05.928Z,1478889305.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:06.144Z,1478889306.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:06.510Z,1478889306.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:06.724Z,1478889306.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:06.943Z,1478889306.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:07.312Z,1478889307.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:07.521Z,1478889307.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:07.712Z,1478889307.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:07.932Z,1478889307.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:08.117Z,1478889308.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:08.514Z,1478889308.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:08.728Z,1478889308.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:08.920Z,1478889308.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:09.273Z,1478889309.273 [NAL9602](INFO): Powering up NAL9602
2016-11-11T18:35:09.329Z,1478889309.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:09.525Z,1478889309.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:09.713Z,1478889309.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:09.936Z,1478889309.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:10.121Z,1478889310.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:10.522Z,1478889310.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:10.732Z,1478889310.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:10.914Z,1478889310.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:11.320Z,1478889311.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:11.529Z,1478889311.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:11.737Z,1478889311.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:11.944Z,1478889311.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:12.120Z,1478889312.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:12.523Z,1478889312.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:12.740Z,1478889312.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:12.920Z,1478889312.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:13.316Z,1478889313.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:13.536Z,1478889313.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:13.724Z,1478889313.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:14.028Z,1478889314.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:14.124Z,1478889314.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:14.512Z,1478889314.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:14.824Z,1478889314.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:14.925Z,1478889314.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:15.315Z,1478889315.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:15.620Z,1478889315.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:15.712Z,1478889315.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:16.110Z,1478889316.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:16.382Z,1478889316.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:16.511Z,1478889316.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:16.911Z,1478889316.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:17.176Z,1478889317.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:17.316Z,1478889317.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:17.715Z,1478889317.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:17.973Z,1478889317.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:18.110Z,1478889318.110 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T18:35:18.110Z,1478889318.110 [BPC1] Data Fault, FailCount= 1
2016-11-11T18:35:18.110Z,1478889318.110 [BPC1](ERROR): Data Fault
2016-11-11T18:35:18.119Z,1478889318.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:18.163Z,1478889318.163 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T18:35:18.384Z,1478889318.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:18.520Z,1478889318.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:18.922Z,1478889318.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:19.180Z,1478889319.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:19.313Z,1478889319.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:19.334Z,1478889319.334 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:35:19.334Z,1478889319.334 [BPC1] No Fault, FailCount= 1
2016-11-11T18:35:19.762Z,1478889319.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:19.913Z,1478889319.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:20.163Z,1478889320.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:20.473Z,1478889320.473 [NAL9602](INFO): NAL9602 initialized
2016-11-11T18:35:20.525Z,1478889320.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:20.711Z,1478889320.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:20.930Z,1478889320.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:21.333Z,1478889321.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:21.512Z,1478889321.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:21.734Z,1478889321.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:21.924Z,1478889321.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:22.137Z,1478889322.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:22.533Z,1478889322.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:22.720Z,1478889322.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:22.929Z,1478889322.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:23.326Z,1478889323.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:23.518Z,1478889323.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:23.741Z,1478889323.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:23.932Z,1478889323.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:24.115Z,1478889324.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:24.513Z,1478889324.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:24.729Z,1478889324.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:24.914Z,1478889324.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:25.319Z,1478889325.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:25.525Z,1478889325.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:25.725Z,1478889325.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:25.932Z,1478889325.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:26.120Z,1478889326.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:26.522Z,1478889326.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:26.728Z,1478889326.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:26.913Z,1478889326.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:27.324Z,1478889327.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:27.524Z,1478889327.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:27.725Z,1478889327.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:28.012Z,1478889328.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:28.130Z,1478889328.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:28.531Z,1478889328.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:28.808Z,1478889328.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:28.931Z,1478889328.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:29.325Z,1478889329.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:29.606Z,1478889329.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:29.721Z,1478889329.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:30.128Z,1478889330.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:30.360Z,1478889330.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:30.529Z,1478889330.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:30.932Z,1478889330.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:31.156Z,1478889331.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:31.329Z,1478889331.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:31.733Z,1478889331.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:31.953Z,1478889331.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:32.162Z,1478889332.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:32.364Z,1478889332.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:32.541Z,1478889332.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:32.927Z,1478889332.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:33.160Z,1478889333.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:33.333Z,1478889333.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:33.761Z,1478889333.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:33.888Z,1478889333.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:34.137Z,1478889334.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:34.554Z,1478889334.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:34.684Z,1478889334.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:34.961Z,1478889334.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:35.325Z,1478889335.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:35.481Z,1478889335.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:35.722Z,1478889335.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:35.892Z,1478889335.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:36.114Z,1478889336.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:36.525Z,1478889336.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:36.688Z,1478889336.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:36.909Z,1478889336.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:37.317Z,1478889337.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:37.489Z,1478889337.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:37.719Z,1478889337.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:37.916Z,1478889337.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:38.120Z,1478889338.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:38.522Z,1478889338.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:38.712Z,1478889338.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:38.917Z,1478889338.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:39.317Z,1478889339.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:39.508Z,1478889339.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:39.721Z,1478889339.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:39.916Z,1478889339.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:40.121Z,1478889340.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:40.525Z,1478889340.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:40.712Z,1478889340.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:40.925Z,1478889340.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:41.324Z,1478889341.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:41.508Z,1478889341.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:41.725Z,1478889341.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:41.988Z,1478889341.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:42.126Z,1478889342.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:42.533Z,1478889342.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:42.784Z,1478889342.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:42.930Z,1478889342.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:43.330Z,1478889343.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:43.580Z,1478889343.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:43.707Z,1478889343.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:44.105Z,1478889344.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:44.364Z,1478889344.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:44.513Z,1478889344.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:44.925Z,1478889344.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:45.160Z,1478889345.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:45.322Z,1478889345.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:45.714Z,1478889345.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:45.957Z,1478889345.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:46.112Z,1478889346.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:46.368Z,1478889346.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:46.561Z,1478889346.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:46.978Z,1478889346.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:47.166Z,1478889347.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:47.336Z,1478889347.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:47.737Z,1478889347.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:47.872Z,1478889347.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:48.113Z,1478889348.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:48.541Z,1478889348.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:48.668Z,1478889348.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:49.465Z,1478889349.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:49.880Z,1478889349.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:50.676Z,1478889350.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:51.476Z,1478889351.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:51.888Z,1478889351.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:52.014Z,1478889352.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:52.161Z,1478889352.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:52.517Z,1478889352.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:52.686Z,1478889352.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:52.916Z,1478889352.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:53.320Z,1478889353.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:53.481Z,1478889353.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:53.729Z,1478889353.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:53.900Z,1478889353.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:54.116Z,1478889354.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:54.523Z,1478889354.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:54.696Z,1478889354.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:54.925Z,1478889354.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:55.329Z,1478889355.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:55.492Z,1478889355.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:55.733Z,1478889355.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:55.960Z,1478889355.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:56.129Z,1478889356.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:56.532Z,1478889356.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:56.756Z,1478889356.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:56.930Z,1478889356.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:57.333Z,1478889357.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:57.552Z,1478889357.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:57.726Z,1478889357.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:58.124Z,1478889358.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:58.324Z,1478889358.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:58.529Z,1478889358.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:58.929Z,1478889358.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:59.120Z,1478889359.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:35:59.329Z,1478889359.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:59.731Z,1478889359.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:35:59.916Z,1478889359.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:00.137Z,1478889360.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:00.328Z,1478889360.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:00.541Z,1478889360.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:00.921Z,1478889360.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:01.125Z,1478889361.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:01.321Z,1478889361.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:01.714Z,1478889361.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:01.848Z,1478889361.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:02.157Z,1478889362.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:02.527Z,1478889362.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:02.646Z,1478889362.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:02.921Z,1478889362.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:03.329Z,1478889363.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:03.441Z,1478889363.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:03.766Z,1478889363.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:03.860Z,1478889363.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:04.121Z,1478889364.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:04.545Z,1478889364.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:04.656Z,1478889364.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:04.921Z,1478889364.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:05.353Z,1478889365.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:05.453Z,1478889365.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:05.733Z,1478889365.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:05.864Z,1478889365.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:06.164Z,1478889366.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:06.517Z,1478889366.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:06.660Z,1478889366.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:06.919Z,1478889366.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:07.325Z,1478889367.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:07.457Z,1478889367.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:07.719Z,1478889367.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:07.868Z,1478889367.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:08.121Z,1478889368.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:08.523Z,1478889368.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:08.560Z,1478889368.560 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T18:36:08.664Z,1478889368.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:08.930Z,1478889368.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:09.325Z,1478889369.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:09.460Z,1478889369.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:09.741Z,1478889369.741 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:09.741Z,1478889369.741 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 255
2016-11-11T18:36:09.741Z,1478889369.741 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:36:09.764Z,1478889369.764 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:09.764Z,1478889369.764 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 255
2016-11-11T18:36:09.765Z,1478889369.764 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:36:09.767Z,1478889369.767 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:09.767Z,1478889369.767 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 255
2016-11-11T18:36:09.767Z,1478889369.767 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:36:09.798Z,1478889369.798 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:36:09.798Z,1478889369.798 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:36:09.798Z,1478889369.798 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:36:10.150Z,1478889370.150 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:36:10.150Z,1478889370.150 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 255
2016-11-11T18:36:10.151Z,1478889370.151 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:36:10.151Z,1478889370.151 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 255
2016-11-11T18:36:10.152Z,1478889370.152 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:36:10.152Z,1478889370.152 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 255
2016-11-11T18:36:10.256Z,1478889370.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:10.537Z,1478889370.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:36:10.538Z,1478889370.538 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:36:10.538Z,1478889370.538 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:36:10.543Z,1478889370.543 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:36:10.543Z,1478889370.543 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:36:10.543Z,1478889370.543 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:36:10.544Z,1478889370.544 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:36:10.544Z,1478889370.544 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:36:10.545Z,1478889370.545 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:36:10.936Z,1478889370.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:11.052Z,1478889371.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:11.323Z,1478889371.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:11.717Z,1478889371.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:11.848Z,1478889371.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:12.140Z,1478889372.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:12.304Z,1478889372.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:12.537Z,1478889372.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:12.921Z,1478889372.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:13.100Z,1478889373.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:13.317Z,1478889373.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:13.721Z,1478889373.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:13.901Z,1478889373.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:14.121Z,1478889374.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:14.320Z,1478889374.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:14.521Z,1478889374.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:14.924Z,1478889374.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:15.116Z,1478889375.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:15.320Z,1478889375.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:15.717Z,1478889375.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:15.824Z,1478889375.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:16.125Z,1478889376.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:16.521Z,1478889376.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:16.620Z,1478889376.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:16.961Z,1478889376.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:17.318Z,1478889377.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:17.417Z,1478889377.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:17.726Z,1478889377.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:17.832Z,1478889377.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:18.141Z,1478889378.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:18.541Z,1478889378.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:18.628Z,1478889378.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:18.933Z,1478889378.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:19.338Z,1478889379.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:19.424Z,1478889379.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:19.717Z,1478889379.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:19.836Z,1478889379.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:20.143Z,1478889380.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:20.548Z,1478889380.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:20.632Z,1478889380.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:20.915Z,1478889380.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:21.319Z,1478889381.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:21.429Z,1478889381.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:21.725Z,1478889381.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:21.840Z,1478889381.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:22.118Z,1478889382.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:22.519Z,1478889382.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:22.636Z,1478889382.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:22.941Z,1478889382.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:23.330Z,1478889383.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:23.432Z,1478889383.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:23.726Z,1478889383.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:23.932Z,1478889383.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:24.130Z,1478889384.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:24.524Z,1478889384.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:24.728Z,1478889384.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:24.929Z,1478889384.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:25.325Z,1478889385.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:25.524Z,1478889385.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:25.724Z,1478889385.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:26.124Z,1478889386.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:26.276Z,1478889386.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:26.520Z,1478889386.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:26.941Z,1478889386.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:27.072Z,1478889387.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:27.330Z,1478889387.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:27.731Z,1478889387.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:27.870Z,1478889387.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:28.121Z,1478889388.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:28.288Z,1478889388.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:28.525Z,1478889388.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:28.929Z,1478889388.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:29.084Z,1478889389.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:29.326Z,1478889389.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:29.729Z,1478889389.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:29.808Z,1478889389.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:30.131Z,1478889390.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:30.518Z,1478889390.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:30.604Z,1478889390.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:30.923Z,1478889390.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:31.351Z,1478889391.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:31.401Z,1478889391.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:31.717Z,1478889391.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:31.812Z,1478889391.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:32.117Z,1478889392.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:32.554Z,1478889392.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:32.608Z,1478889392.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:32.915Z,1478889392.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:33.315Z,1478889393.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:33.405Z,1478889393.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:33.745Z,1478889393.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:33.816Z,1478889393.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:34.128Z,1478889394.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:34.545Z,1478889394.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:34.612Z,1478889394.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:34.939Z,1478889394.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:35.311Z,1478889395.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:35.409Z,1478889395.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:35.731Z,1478889395.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:35.820Z,1478889395.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:36.125Z,1478889396.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:36.517Z,1478889396.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:36.616Z,1478889396.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:36.921Z,1478889396.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:37.316Z,1478889397.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:37.412Z,1478889397.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:37.729Z,1478889397.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:37.896Z,1478889397.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:38.124Z,1478889398.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:38.525Z,1478889398.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:38.692Z,1478889398.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:38.925Z,1478889398.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:39.327Z,1478889399.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:39.488Z,1478889399.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:39.729Z,1478889399.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:40.143Z,1478889400.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:40.252Z,1478889400.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:40.530Z,1478889400.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:40.933Z,1478889400.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:41.048Z,1478889401.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:41.331Z,1478889401.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:41.732Z,1478889401.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:41.845Z,1478889401.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:42.108Z,1478889402.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:42.256Z,1478889402.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:42.512Z,1478889402.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:42.940Z,1478889402.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:43.052Z,1478889403.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:43.315Z,1478889403.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:43.729Z,1478889403.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:43.804Z,1478889403.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:44.118Z,1478889404.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:44.526Z,1478889404.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:44.600Z,1478889404.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:44.930Z,1478889404.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:45.386Z,1478889405.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:45.397Z,1478889405.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:45.721Z,1478889405.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:45.808Z,1478889405.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:46.126Z,1478889406.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:46.519Z,1478889406.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:46.604Z,1478889406.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:46.957Z,1478889406.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:47.348Z,1478889407.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:47.401Z,1478889407.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:47.721Z,1478889407.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:47.808Z,1478889407.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:48.147Z,1478889408.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:48.545Z,1478889408.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:48.604Z,1478889408.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:49.400Z,1478889409.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:49.808Z,1478889409.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:50.604Z,1478889410.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:51.400Z,1478889411.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:51.880Z,1478889411.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:52.058Z,1478889412.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:52.197Z,1478889412.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:52.572Z,1478889412.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:52.676Z,1478889412.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:52.951Z,1478889412.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:53.351Z,1478889413.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:53.472Z,1478889413.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:53.733Z,1478889413.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:54.137Z,1478889414.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:54.240Z,1478889414.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:54.540Z,1478889414.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:54.952Z,1478889414.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:55.036Z,1478889415.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:55.342Z,1478889415.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:55.741Z,1478889415.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:55.833Z,1478889415.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:56.150Z,1478889416.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:56.244Z,1478889416.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:56.545Z,1478889416.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:56.926Z,1478889416.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:57.040Z,1478889417.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:57.413Z,1478889417.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:57.738Z,1478889417.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:57.788Z,1478889417.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:58.144Z,1478889418.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:58.535Z,1478889418.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:58.584Z,1478889418.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:58.929Z,1478889418.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:59.380Z,1478889419.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:36:59.397Z,1478889419.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:59.745Z,1478889419.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:36:59.788Z,1478889419.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:00.141Z,1478889420.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:00.540Z,1478889420.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:00.585Z,1478889420.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:00.942Z,1478889420.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:01.380Z,1478889421.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:01.404Z,1478889421.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:01.777Z,1478889421.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:01.788Z,1478889421.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:02.138Z,1478889422.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:02.581Z,1478889422.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:02.584Z,1478889422.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:02.982Z,1478889422.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:03.380Z,1478889423.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:03.413Z,1478889423.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:03.755Z,1478889423.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:03.792Z,1478889423.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:04.126Z,1478889424.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:04.574Z,1478889424.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:04.588Z,1478889424.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:04.970Z,1478889424.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:05.340Z,1478889425.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:05.384Z,1478889425.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:05.802Z,1478889425.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:05.884Z,1478889425.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:06.154Z,1478889426.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:06.586Z,1478889426.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:06.680Z,1478889426.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:06.990Z,1478889426.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:07.345Z,1478889427.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:07.476Z,1478889427.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:07.742Z,1478889427.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:08.168Z,1478889428.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:08.212Z,1478889428.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:08.567Z,1478889428.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:08.938Z,1478889428.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:09.008Z,1478889429.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:09.354Z,1478889429.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:09.755Z,1478889429.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:09.805Z,1478889429.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:10.152Z,1478889430.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:10.244Z,1478889430.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:10.549Z,1478889430.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:10.983Z,1478889430.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:11.040Z,1478889431.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:11.420Z,1478889431.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:11.740Z,1478889431.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:11.773Z,1478889431.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:12.152Z,1478889432.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:12.536Z,1478889432.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:12.544Z,1478889432.544 [PNI_TCM](ERROR): CRC does not match. Expected:0x56543 got:0x34333
2016-11-11T18:37:12.562Z,1478889432.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:12.953Z,1478889432.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:13.333Z,1478889433.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:13.405Z,1478889433.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:13.753Z,1478889433.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:13.804Z,1478889433.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:14.161Z,1478889434.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:14.562Z,1478889434.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:14.600Z,1478889434.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:14.958Z,1478889434.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:15.396Z,1478889435.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:15.423Z,1478889435.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:15.766Z,1478889435.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:15.804Z,1478889435.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:16.207Z,1478889436.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:16.553Z,1478889436.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:16.600Z,1478889436.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:16.957Z,1478889436.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:17.376Z,1478889437.376 [PNI_TCM](ERROR): CRC does not match. Expected:0x58235 got:0x43891
2016-11-11T18:37:17.396Z,1478889437.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:17.426Z,1478889437.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:17.790Z,1478889437.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:17.804Z,1478889437.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:18.141Z,1478889438.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:18.574Z,1478889438.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:18.600Z,1478889438.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:18.982Z,1478889438.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:19.354Z,1478889439.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:19.397Z,1478889439.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:19.776Z,1478889439.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:19.836Z,1478889439.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:20.169Z,1478889440.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:20.582Z,1478889440.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:20.632Z,1478889440.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:21.002Z,1478889441.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:21.373Z,1478889441.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:21.428Z,1478889441.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:21.817Z,1478889441.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:22.135Z,1478889442.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:22.196Z,1478889442.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:22.550Z,1478889442.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:22.957Z,1478889442.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:22.992Z,1478889442.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:23.345Z,1478889443.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:23.715Z,1478889443.714 [PNI_TCM](ERROR): CRC does not match. Expected:0x5647 got:0x16873
2016-11-11T18:37:23.737Z,1478889443.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:23.789Z,1478889443.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:24.169Z,1478889444.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:24.216Z,1478889444.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:24.529Z,1478889444.529 [PNI_TCM](ERROR): CRC does not match. Expected:0x11680 got:0x1
2016-11-11T18:37:24.558Z,1478889444.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:24.942Z,1478889444.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:25.012Z,1478889445.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:25.370Z,1478889445.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:25.748Z,1478889445.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:25.754Z,1478889445.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:26.156Z,1478889446.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:26.544Z,1478889446.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:26.569Z,1478889446.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:26.954Z,1478889446.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:27.340Z,1478889447.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:27.370Z,1478889447.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:27.754Z,1478889447.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:27.768Z,1478889447.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:28.138Z,1478889448.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:28.542Z,1478889448.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:28.564Z,1478889448.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:28.958Z,1478889448.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:29.360Z,1478889449.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:29.383Z,1478889449.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:29.750Z,1478889449.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:29.776Z,1478889449.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:30.153Z,1478889450.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:30.558Z,1478889450.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:30.572Z,1478889450.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:30.974Z,1478889450.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:31.364Z,1478889451.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:31.368Z,1478889451.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:31.770Z,1478889451.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:32.141Z,1478889452.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:32.164Z,1478889452.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:32.523Z,1478889452.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:32.923Z,1478889452.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:32.960Z,1478889452.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:33.329Z,1478889453.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:33.746Z,1478889453.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:33.756Z,1478889453.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:34.120Z,1478889454.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:34.552Z,1478889454.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:34.554Z,1478889454.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:34.924Z,1478889454.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:35.348Z,1478889455.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:35.410Z,1478889455.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:35.781Z,1478889455.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:36.134Z,1478889456.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:36.145Z,1478889456.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:36.539Z,1478889456.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:36.940Z,1478889456.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:36.943Z,1478889456.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:37.333Z,1478889457.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:37.733Z,1478889457.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:37.737Z,1478889457.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:38.129Z,1478889458.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:38.526Z,1478889458.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:38.532Z,1478889458.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:38.929Z,1478889458.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:39.328Z,1478889459.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:39.328Z,1478889459.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:39.760Z,1478889459.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:40.124Z,1478889460.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:40.125Z,1478889460.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:40.524Z,1478889460.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:40.921Z,1478889460.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:40.941Z,1478889460.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:41.340Z,1478889461.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:41.716Z,1478889461.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:41.743Z,1478889461.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:42.135Z,1478889462.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:42.512Z,1478889462.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:42.529Z,1478889462.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:42.934Z,1478889462.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:43.308Z,1478889463.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:43.337Z,1478889463.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:43.729Z,1478889463.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:44.105Z,1478889464.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:44.121Z,1478889464.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:44.524Z,1478889464.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:44.902Z,1478889464.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:44.961Z,1478889464.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:45.325Z,1478889465.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:45.696Z,1478889465.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:45.726Z,1478889465.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:46.161Z,1478889466.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:46.492Z,1478889466.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:46.538Z,1478889466.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:46.942Z,1478889466.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:47.288Z,1478889467.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:47.338Z,1478889467.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:47.741Z,1478889467.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:48.084Z,1478889468.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:48.128Z,1478889468.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:48.526Z,1478889468.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:48.896Z,1478889468.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:49.692Z,1478889469.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:50.488Z,1478889470.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:51.284Z,1478889471.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:51.774Z,1478889471.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:51.906Z,1478889471.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:52.080Z,1478889472.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:52.285Z,1478889472.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:52.678Z,1478889472.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:52.877Z,1478889472.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:53.041Z,1478889473.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:53.440Z,1478889473.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:53.672Z,1478889473.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:53.841Z,1478889473.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:54.241Z,1478889474.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:54.468Z,1478889474.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:54.673Z,1478889474.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:55.045Z,1478889475.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:55.104Z,1478889475.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:55.454Z,1478889475.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:55.512Z,1478889475.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:55.857Z,1478889475.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:55.920Z,1478889475.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:56.253Z,1478889476.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:56.328Z,1478889476.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:56.673Z,1478889476.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:56.736Z,1478889476.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:57.053Z,1478889477.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:57.144Z,1478889477.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:57.467Z,1478889477.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:57.552Z,1478889477.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:57.877Z,1478889477.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:57.960Z,1478889477.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:58.249Z,1478889478.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:58.368Z,1478889478.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:58.658Z,1478889478.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:58.776Z,1478889478.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:59.049Z,1478889479.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:59.184Z,1478889479.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:59.450Z,1478889479.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:59.592Z,1478889479.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:37:59.861Z,1478889479.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:37:59.000Z,1478889480.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:00.249Z,1478889480.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:00.408Z,1478889480.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:00.649Z,1478889480.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:00.816Z,1478889480.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:01.045Z,1478889481.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:01.449Z,1478889481.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:01.614Z,1478889481.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:01.863Z,1478889481.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:02.024Z,1478889482.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:02.258Z,1478889482.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:02.658Z,1478889482.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:02.820Z,1478889482.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:03.081Z,1478889483.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:03.466Z,1478889483.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:03.616Z,1478889483.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:03.860Z,1478889483.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:04.108Z,1478889484.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:04.262Z,1478889484.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:04.660Z,1478889484.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:04.904Z,1478889484.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:05.076Z,1478889485.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:05.445Z,1478889485.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:05.701Z,1478889485.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:05.893Z,1478889485.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:06.112Z,1478889486.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:06.242Z,1478889486.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:06.689Z,1478889486.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:06.908Z,1478889486.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:07.086Z,1478889487.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:07.453Z,1478889487.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:07.636Z,1478889487.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:07.859Z,1478889487.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:08.261Z,1478889488.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:08.432Z,1478889488.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:08.646Z,1478889488.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:09.051Z,1478889489.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:09.229Z,1478889489.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:09.455Z,1478889489.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:09.640Z,1478889489.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:09.845Z,1478889489.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:10.249Z,1478889490.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:10.436Z,1478889490.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:10.661Z,1478889490.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:11.081Z,1478889491.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:11.233Z,1478889491.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:11.449Z,1478889491.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:11.644Z,1478889491.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:11.857Z,1478889491.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:12.270Z,1478889492.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:12.440Z,1478889492.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:12.658Z,1478889492.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:13.059Z,1478889493.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:13.237Z,1478889493.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:13.458Z,1478889493.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:13.648Z,1478889493.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:13.854Z,1478889493.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:14.249Z,1478889494.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:14.444Z,1478889494.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:14.658Z,1478889494.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:15.057Z,1478889495.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:15.241Z,1478889495.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:15.441Z,1478889495.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:15.728Z,1478889495.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:15.845Z,1478889495.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:16.249Z,1478889496.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:16.524Z,1478889496.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:16.645Z,1478889496.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:17.056Z,1478889497.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:17.320Z,1478889497.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:17.493Z,1478889497.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:17.861Z,1478889497.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:18.088Z,1478889498.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:18.260Z,1478889498.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:18.658Z,1478889498.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:18.886Z,1478889498.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:19.085Z,1478889499.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:19.449Z,1478889499.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:19.681Z,1478889499.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:19.854Z,1478889499.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:20.092Z,1478889500.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:20.285Z,1478889500.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:20.646Z,1478889500.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:20.888Z,1478889500.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:21.086Z,1478889501.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:21.481Z,1478889501.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:21.616Z,1478889501.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:21.849Z,1478889501.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:22.254Z,1478889502.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:22.412Z,1478889502.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:22.660Z,1478889502.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:23.056Z,1478889503.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:23.209Z,1478889503.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:23.470Z,1478889503.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:23.620Z,1478889503.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:23.860Z,1478889503.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:24.257Z,1478889504.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:24.416Z,1478889504.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:24.658Z,1478889504.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:25.057Z,1478889505.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:25.213Z,1478889505.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:25.457Z,1478889505.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:25.624Z,1478889505.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:25.857Z,1478889505.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:26.249Z,1478889506.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:26.420Z,1478889506.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:26.661Z,1478889506.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:27.077Z,1478889507.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:27.217Z,1478889507.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:27.443Z,1478889507.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:27.628Z,1478889507.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:27.851Z,1478889507.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:28.257Z,1478889508.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:28.424Z,1478889508.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:28.664Z,1478889508.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:29.058Z,1478889509.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:29.220Z,1478889509.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:29.445Z,1478889509.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:29.716Z,1478889509.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:29.849Z,1478889509.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:30.247Z,1478889510.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:30.514Z,1478889510.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:30.653Z,1478889510.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:31.049Z,1478889511.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:31.308Z,1478889511.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:31.452Z,1478889511.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:31.849Z,1478889511.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:32.064Z,1478889512.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:32.257Z,1478889512.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:32.660Z,1478889512.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:32.860Z,1478889512.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:33.058Z,1478889513.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:33.461Z,1478889513.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:33.657Z,1478889513.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:33.913Z,1478889513.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:34.072Z,1478889514.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:34.268Z,1478889514.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:34.677Z,1478889514.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:34.868Z,1478889514.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:35.042Z,1478889515.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:35.479Z,1478889515.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:35.604Z,1478889515.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:35.871Z,1478889515.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:36.245Z,1478889516.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:36.400Z,1478889516.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:36.649Z,1478889516.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:37.053Z,1478889517.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:37.197Z,1478889517.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:37.444Z,1478889517.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:37.608Z,1478889517.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:37.847Z,1478889517.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:38.245Z,1478889518.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:38.404Z,1478889518.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:38.654Z,1478889518.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:39.052Z,1478889519.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:39.201Z,1478889519.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:39.455Z,1478889519.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:39.616Z,1478889519.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:39.846Z,1478889519.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:40.249Z,1478889520.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:40.412Z,1478889520.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:40.656Z,1478889520.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:41.058Z,1478889521.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:41.209Z,1478889521.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:41.449Z,1478889521.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:41.620Z,1478889521.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:41.853Z,1478889521.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:42.249Z,1478889522.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:42.416Z,1478889522.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:42.668Z,1478889522.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:43.063Z,1478889523.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:43.212Z,1478889523.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:43.453Z,1478889523.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:43.708Z,1478889523.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:43.862Z,1478889523.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:44.257Z,1478889524.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:44.504Z,1478889524.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:44.656Z,1478889524.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:45.041Z,1478889525.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:45.300Z,1478889525.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:45.445Z,1478889525.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:45.845Z,1478889525.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:46.044Z,1478889526.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:46.245Z,1478889526.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:46.657Z,1478889526.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:46.840Z,1478889526.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:47.060Z,1478889527.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:47.485Z,1478889527.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:47.638Z,1478889527.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:47.885Z,1478889527.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:48.072Z,1478889528.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:48.261Z,1478889528.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:48.649Z,1478889528.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:48.868Z,1478889528.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:49.576Z,1478889529.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:50.372Z,1478889530.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:51.169Z,1478889531.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:51.584Z,1478889531.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:52.218Z,1478889532.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:52.349Z,1478889532.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:52.380Z,1478889532.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:52.741Z,1478889532.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:53.176Z,1478889533.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:53.201Z,1478889533.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:53.498Z,1478889533.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:53.588Z,1478889533.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:53.902Z,1478889533.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:54.305Z,1478889534.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:54.384Z,1478889534.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:54.704Z,1478889534.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:55.103Z,1478889535.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:55.181Z,1478889535.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:55.493Z,1478889535.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:55.592Z,1478889535.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:55.891Z,1478889535.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:56.294Z,1478889536.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:56.388Z,1478889536.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:56.724Z,1478889536.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:57.099Z,1478889537.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:57.184Z,1478889537.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:57.499Z,1478889537.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:57.668Z,1478889537.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:57.910Z,1478889537.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:58.329Z,1478889538.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:58.464Z,1478889538.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:58.705Z,1478889538.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:59.106Z,1478889539.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:59.260Z,1478889539.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:38:59.505Z,1478889539.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:38:59.904Z,1478889539.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:00.024Z,1478889540.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:00.306Z,1478889540.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:00.710Z,1478889540.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:00.820Z,1478889540.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:01.140Z,1478889541.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:01.522Z,1478889541.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:01.617Z,1478889541.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:01.925Z,1478889541.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:02.028Z,1478889542.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:02.322Z,1478889542.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:02.729Z,1478889542.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:02.824Z,1478889542.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:03.099Z,1478889543.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:03.502Z,1478889543.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:03.560Z,1478889543.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:03.905Z,1478889543.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:04.313Z,1478889544.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:04.356Z,1478889544.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:04.714Z,1478889544.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:05.153Z,1478889545.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:05.251Z,1478889545.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:05.500Z,1478889545.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:05.564Z,1478889545.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:05.948Z,1478889545.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:06.306Z,1478889546.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:06.360Z,1478889546.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:06.741Z,1478889546.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:07.157Z,1478889547.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:07.229Z,1478889547.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:07.520Z,1478889547.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:07.568Z,1478889547.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:07.920Z,1478889547.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:08.297Z,1478889548.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:08.364Z,1478889548.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:08.697Z,1478889548.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:09.142Z,1478889549.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:09.161Z,1478889549.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:09.504Z,1478889549.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:09.572Z,1478889549.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:09.905Z,1478889549.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:10.294Z,1478889550.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:10.368Z,1478889550.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:10.708Z,1478889550.708 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:10.708Z,1478889550.708 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 256
2016-11-11T18:39:10.708Z,1478889550.708 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:39:10.715Z,1478889550.715 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:10.715Z,1478889550.715 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 256
2016-11-11T18:39:10.715Z,1478889550.716 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:39:10.717Z,1478889550.717 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:10.718Z,1478889550.718 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 256
2016-11-11T18:39:10.718Z,1478889550.718 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:39:10.736Z,1478889550.736 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:39:10.737Z,1478889550.737 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:39:10.737Z,1478889550.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:39:11.126Z,1478889551.126 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:39:11.126Z,1478889551.126 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 256
2016-11-11T18:39:11.127Z,1478889551.127 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:39:11.127Z,1478889551.127 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 256
2016-11-11T18:39:11.128Z,1478889551.128 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:39:11.128Z,1478889551.128 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 256
2016-11-11T18:39:11.164Z,1478889551.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:11.485Z,1478889551.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:39:11.485Z,1478889551.485 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:39:11.486Z,1478889551.486 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:39:11.490Z,1478889551.490 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:39:11.491Z,1478889551.491 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:39:11.491Z,1478889551.491 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:39:11.492Z,1478889551.492 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:39:11.492Z,1478889551.492 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:39:11.493Z,1478889551.493 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:39:11.644Z,1478889551.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:11.902Z,1478889551.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:12.305Z,1478889552.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:12.440Z,1478889552.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:12.699Z,1478889552.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:13.106Z,1478889553.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:13.236Z,1478889553.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:13.501Z,1478889553.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:13.900Z,1478889553.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:14.004Z,1478889554.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:14.299Z,1478889554.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:14.699Z,1478889554.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:14.800Z,1478889554.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:15.104Z,1478889555.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:15.504Z,1478889555.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:15.598Z,1478889555.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:15.910Z,1478889555.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:16.012Z,1478889556.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:16.317Z,1478889556.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:16.694Z,1478889556.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:16.810Z,1478889556.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:17.162Z,1478889557.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:17.529Z,1478889557.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:17.552Z,1478889557.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:17.934Z,1478889557.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:18.329Z,1478889558.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:18.348Z,1478889558.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:18.693Z,1478889558.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:19.145Z,1478889559.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:19.194Z,1478889559.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:19.497Z,1478889559.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:19.556Z,1478889559.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:19.908Z,1478889559.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:20.332Z,1478889560.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:20.352Z,1478889560.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:20.696Z,1478889560.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:21.149Z,1478889561.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:21.197Z,1478889561.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:21.513Z,1478889561.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:21.556Z,1478889561.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:21.964Z,1478889561.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:22.306Z,1478889562.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:22.352Z,1478889562.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:22.712Z,1478889562.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:23.148Z,1478889563.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:23.173Z,1478889563.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:23.545Z,1478889563.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:23.556Z,1478889563.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:23.921Z,1478889563.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:24.306Z,1478889564.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:24.352Z,1478889564.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:24.709Z,1478889564.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:25.108Z,1478889565.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:25.148Z,1478889565.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:25.513Z,1478889565.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:25.620Z,1478889565.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:25.907Z,1478889565.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:26.306Z,1478889566.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:26.416Z,1478889566.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:26.705Z,1478889566.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:27.097Z,1478889567.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:27.212Z,1478889567.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:27.499Z,1478889567.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:27.908Z,1478889567.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:27.984Z,1478889567.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:28.307Z,1478889568.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:28.709Z,1478889568.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:28.781Z,1478889568.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:29.106Z,1478889569.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:29.507Z,1478889569.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:29.576Z,1478889569.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:29.916Z,1478889569.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:29.988Z,1478889569.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:30.301Z,1478889570.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:30.700Z,1478889570.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:30.784Z,1478889570.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:31.158Z,1478889571.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:31.512Z,1478889571.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:31.532Z,1478889571.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:31.890Z,1478889571.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:32.294Z,1478889572.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:32.328Z,1478889572.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:32.733Z,1478889572.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:33.125Z,1478889573.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:33.181Z,1478889573.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:33.536Z,1478889573.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:33.546Z,1478889573.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:33.893Z,1478889573.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:34.317Z,1478889574.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:34.332Z,1478889574.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:34.749Z,1478889574.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:35.128Z,1478889575.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:35.173Z,1478889575.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:35.539Z,1478889575.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:35.544Z,1478889575.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:35.939Z,1478889575.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:36.312Z,1478889576.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:36.340Z,1478889576.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:36.707Z,1478889576.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:37.136Z,1478889577.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:37.147Z,1478889577.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:37.498Z,1478889577.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:37.544Z,1478889577.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:37.903Z,1478889577.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:38.325Z,1478889578.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:38.340Z,1478889578.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:38.736Z,1478889578.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:39.124Z,1478889579.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:39.136Z,1478889579.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:39.501Z,1478889579.501 [PNI_TCM](ERROR): CRC does not match. Expected:0x1832 got:0x45340
2016-11-11T18:39:39.532Z,1478889579.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:39.616Z,1478889579.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:39.917Z,1478889579.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:40.342Z,1478889580.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:40.412Z,1478889580.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:40.714Z,1478889580.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:41.113Z,1478889581.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:41.208Z,1478889581.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:41.512Z,1478889581.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:41.912Z,1478889581.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:41.972Z,1478889581.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:42.320Z,1478889582.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:42.706Z,1478889582.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:42.768Z,1478889582.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:43.123Z,1478889583.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:43.508Z,1478889583.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:43.565Z,1478889583.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:43.910Z,1478889583.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:43.976Z,1478889583.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:44.309Z,1478889584.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:44.711Z,1478889584.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:44.772Z,1478889584.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:45.161Z,1478889585.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:45.508Z,1478889585.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:45.521Z,1478889585.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:45.887Z,1478889585.887 [PNI_TCM](ERROR): CRC does not match. Expected:0x53441 got:0x16913
2016-11-11T18:39:45.925Z,1478889585.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:46.304Z,1478889586.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:46.341Z,1478889586.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:46.701Z,1478889586.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:47.102Z,1478889587.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:47.157Z,1478889587.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:47.512Z,1478889587.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:47.517Z,1478889587.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:47.953Z,1478889587.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:48.302Z,1478889588.302 [PNI_TCM](ERROR): CRC does not match. Expected:0x10392 got:0x6591
2016-11-11T18:39:48.308Z,1478889588.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:48.322Z,1478889588.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:48.351Z,1478889588.351 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T18:34:48.2Z
2016-11-11T18:39:48.351Z,1478889588.351 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T18:39:48.351Z,1478889588.351 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T18:39:48.717Z,1478889588.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:49.105Z,1478889589.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:49.516Z,1478889589.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:50.312Z,1478889590.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:51.108Z,1478889591.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:51.516Z,1478889591.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:52.312Z,1478889592.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:52.965Z,1478889592.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:53.022Z,1478889593.022 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0320.lzma
2016-11-11T18:39:53.108Z,1478889593.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:53.114Z,1478889593.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:53.497Z,1478889593.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:53.600Z,1478889593.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:53.794Z,1478889593.793 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0320.lzma.bak
2016-11-11T18:39:53.794Z,1478889593.794 [DataOverHttps](INFO): SBD MOMSN=4555658
2016-11-11T18:39:53.890Z,1478889593.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:54.396Z,1478889594.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:55.166Z,1478889595.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:55.192Z,1478889595.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:55.294Z,1478889595.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:55.936Z,1478889595.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:56.732Z,1478889596.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:57.530Z,1478889597.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:57.944Z,1478889597.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:58.740Z,1478889598.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:58.813Z,1478889598.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:58.953Z,1478889598.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:59.325Z,1478889599.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:39:59.452Z,1478889599.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:39:59.720Z,1478889599.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:00.094Z,1478889600.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:00.248Z,1478889600.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:00.501Z,1478889600.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:01.045Z,1478889601.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:01.456Z,1478889601.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:02.252Z,1478889602.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:03.049Z,1478889603.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:03.461Z,1478889603.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:03.983Z,1478889603.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:04.032Z,1478889604.032 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0321.lzma
2016-11-11T18:40:04.129Z,1478889604.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:04.256Z,1478889604.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:04.483Z,1478889604.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:04.813Z,1478889604.813 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0321.lzma.bak
2016-11-11T18:40:04.814Z,1478889604.814 [DataOverHttps](INFO): SBD MOMSN=4555660
2016-11-11T18:40:04.906Z,1478889604.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:05.053Z,1478889605.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:05.464Z,1478889605.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:06.169Z,1478889606.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:06.198Z,1478889606.198 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T18:40:06.199Z,1478889606.198 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T18:40:06.199Z,1478889606.199 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T18:40:06.262Z,1478889606.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:06.290Z,1478889606.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:07.057Z,1478889607.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:07.552Z,1478889607.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:08.348Z,1478889608.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:09.144Z,1478889609.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:09.908Z,1478889609.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:10.000Z,1478889610.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:10.141Z,1478889610.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:10.509Z,1478889610.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:10.704Z,1478889610.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:10.913Z,1478889610.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:11.273Z,1478889611.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:11.500Z,1478889611.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:11.679Z,1478889611.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:11.956Z,1478889611.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:12.081Z,1478889612.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:12.474Z,1478889612.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:12.754Z,1478889612.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:12.926Z,1478889612.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:13.277Z,1478889613.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:13.428Z,1478889613.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:13.681Z,1478889613.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:14.081Z,1478889614.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:14.224Z,1478889614.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:14.481Z,1478889614.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:14.872Z,1478889614.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:15.048Z,1478889615.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:15.289Z,1478889615.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:15.456Z,1478889615.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:15.664Z,1478889615.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:16.073Z,1478889616.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:16.252Z,1478889616.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:16.474Z,1478889616.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:16.868Z,1478889616.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:17.048Z,1478889617.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:17.315Z,1478889617.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:17.456Z,1478889617.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:17.679Z,1478889617.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:18.069Z,1478889618.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:18.252Z,1478889618.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:18.465Z,1478889618.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:18.868Z,1478889618.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:19.048Z,1478889619.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:19.277Z,1478889619.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:19.456Z,1478889619.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:19.673Z,1478889619.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:20.064Z,1478889620.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:20.252Z,1478889620.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:20.468Z,1478889620.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:20.869Z,1478889620.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:21.048Z,1478889621.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:21.277Z,1478889621.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:21.548Z,1478889621.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:21.706Z,1478889621.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:22.079Z,1478889622.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:22.344Z,1478889622.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:22.497Z,1478889622.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:22.873Z,1478889622.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:23.140Z,1478889623.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:23.293Z,1478889623.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:23.632Z,1478889623.632 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T18:40:23.669Z,1478889623.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:23.908Z,1478889623.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:24.094Z,1478889624.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:24.477Z,1478889624.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:24.704Z,1478889624.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:24.905Z,1478889624.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:25.308Z,1478889625.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:25.500Z,1478889625.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:25.677Z,1478889625.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:25.908Z,1478889625.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:26.073Z,1478889626.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:26.469Z,1478889626.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:26.704Z,1478889626.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:26.873Z,1478889626.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:27.269Z,1478889627.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:27.484Z,1478889627.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:27.673Z,1478889627.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:28.069Z,1478889628.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:28.280Z,1478889628.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:28.467Z,1478889628.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:28.868Z,1478889628.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:29.076Z,1478889629.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:29.241Z,1478889629.240 [NAL9602](INFO): Powering down
2016-11-11T18:40:29.275Z,1478889629.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:29.484Z,1478889629.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:29.669Z,1478889629.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:30.061Z,1478889630.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:30.280Z,1478889630.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:30.473Z,1478889630.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:30.869Z,1478889630.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:31.076Z,1478889631.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:31.277Z,1478889631.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:31.484Z,1478889631.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:31.677Z,1478889631.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:32.068Z,1478889632.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:32.280Z,1478889632.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:32.473Z,1478889632.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:32.877Z,1478889632.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:33.076Z,1478889633.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:33.277Z,1478889633.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:33.484Z,1478889633.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:33.677Z,1478889633.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:34.073Z,1478889634.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:34.280Z,1478889634.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:34.477Z,1478889634.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:34.877Z,1478889634.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:35.077Z,1478889635.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:35.274Z,1478889635.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:35.544Z,1478889635.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:35.701Z,1478889635.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:36.070Z,1478889636.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:36.340Z,1478889636.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:36.469Z,1478889636.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:36.873Z,1478889636.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:37.138Z,1478889637.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:37.313Z,1478889637.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:37.672Z,1478889637.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:37.888Z,1478889637.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:38.110Z,1478889638.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:38.483Z,1478889638.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:38.684Z,1478889638.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:38.913Z,1478889638.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:39.286Z,1478889639.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:39.480Z,1478889639.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:39.711Z,1478889639.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:39.888Z,1478889639.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:40.084Z,1478889640.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:40.481Z,1478889640.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:40.684Z,1478889640.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:40.874Z,1478889640.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:41.284Z,1478889641.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:41.412Z,1478889641.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:41.681Z,1478889641.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:42.091Z,1478889642.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:42.208Z,1478889642.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:42.464Z,1478889642.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:42.869Z,1478889642.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:43.005Z,1478889643.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:43.290Z,1478889643.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:43.420Z,1478889643.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:43.670Z,1478889643.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:44.069Z,1478889644.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:44.216Z,1478889644.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:44.469Z,1478889644.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:44.867Z,1478889644.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:45.012Z,1478889645.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:45.281Z,1478889645.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:45.424Z,1478889645.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:45.670Z,1478889645.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:46.077Z,1478889646.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:46.220Z,1478889646.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:46.475Z,1478889646.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:46.885Z,1478889646.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:47.017Z,1478889647.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:47.284Z,1478889647.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:47.428Z,1478889647.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:47.683Z,1478889647.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:48.084Z,1478889648.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:48.224Z,1478889648.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:48.484Z,1478889648.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:48.883Z,1478889648.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:49.020Z,1478889649.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:49.284Z,1478889649.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:49.508Z,1478889649.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:49.684Z,1478889649.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:50.083Z,1478889650.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:50.304Z,1478889650.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:50.509Z,1478889650.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:50.869Z,1478889650.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:51.100Z,1478889651.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:51.268Z,1478889651.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:51.727Z,1478889651.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:51.866Z,1478889651.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:52.070Z,1478889652.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:52.471Z,1478889652.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:52.660Z,1478889652.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:52.902Z,1478889652.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:53.271Z,1478889653.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:53.456Z,1478889653.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:53.706Z,1478889653.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:53.864Z,1478889653.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:54.077Z,1478889654.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:54.510Z,1478889654.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:54.660Z,1478889654.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:54.874Z,1478889654.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:55.281Z,1478889655.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:55.400Z,1478889655.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:55.692Z,1478889655.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:56.066Z,1478889656.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:56.196Z,1478889656.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:56.491Z,1478889656.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:56.864Z,1478889656.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:56.992Z,1478889656.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:57.276Z,1478889657.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:57.408Z,1478889657.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:57.677Z,1478889657.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:58.071Z,1478889658.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:58.204Z,1478889658.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:58.475Z,1478889658.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:58.877Z,1478889658.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:59.000Z,1478889659.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:59.280Z,1478889659.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:40:59.408Z,1478889659.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:40:59.681Z,1478889659.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:00.080Z,1478889660.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:00.204Z,1478889660.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:00.479Z,1478889660.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:00.880Z,1478889660.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:01.000Z,1478889661.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:01.269Z,1478889661.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:01.408Z,1478889661.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:01.673Z,1478889661.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:02.067Z,1478889662.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:02.204Z,1478889662.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:02.471Z,1478889662.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:02.870Z,1478889662.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:02.000Z,1478889663.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:03.276Z,1478889663.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:03.484Z,1478889663.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:03.671Z,1478889663.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:04.078Z,1478889664.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:04.280Z,1478889664.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:04.479Z,1478889664.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:04.909Z,1478889664.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:05.076Z,1478889665.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:05.268Z,1478889665.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:05.669Z,1478889665.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:05.844Z,1478889665.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:06.068Z,1478889666.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:06.513Z,1478889666.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:06.641Z,1478889666.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:06.875Z,1478889666.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:07.436Z,1478889667.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:07.856Z,1478889667.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:08.652Z,1478889668.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:09.393Z,1478889669.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:10.188Z,1478889670.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:10.357Z,1478889670.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:10.481Z,1478889670.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:10.873Z,1478889670.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:10.984Z,1478889670.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:11.261Z,1478889671.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:11.392Z,1478889671.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:11.629Z,1478889671.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:12.037Z,1478889672.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:12.188Z,1478889672.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:12.438Z,1478889672.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:12.837Z,1478889672.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:12.984Z,1478889672.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:13.250Z,1478889673.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:13.392Z,1478889673.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:13.633Z,1478889673.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:14.027Z,1478889674.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:14.188Z,1478889674.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:14.437Z,1478889674.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:14.827Z,1478889674.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:14.984Z,1478889674.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:15.241Z,1478889675.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:15.392Z,1478889675.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:15.649Z,1478889675.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:16.049Z,1478889676.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:16.188Z,1478889676.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:16.425Z,1478889676.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:16.827Z,1478889676.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:16.984Z,1478889676.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:17.233Z,1478889677.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:17.496Z,1478889677.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:17.631Z,1478889677.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:18.028Z,1478889678.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:18.292Z,1478889678.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:18.436Z,1478889678.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:18.830Z,1478889678.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:19.088Z,1478889679.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:19.233Z,1478889679.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:19.636Z,1478889679.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:19.824Z,1478889679.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:20.037Z,1478889680.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:20.429Z,1478889680.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:20.620Z,1478889680.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:20.837Z,1478889680.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:21.230Z,1478889681.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:21.416Z,1478889681.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:21.661Z,1478889681.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:21.824Z,1478889681.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:22.036Z,1478889682.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:22.436Z,1478889682.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:22.620Z,1478889682.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:22.839Z,1478889682.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:23.269Z,1478889683.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:23.360Z,1478889683.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:23.626Z,1478889683.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:24.027Z,1478889684.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:24.156Z,1478889684.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:24.462Z,1478889684.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:24.831Z,1478889684.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:24.952Z,1478889684.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:25.284Z,1478889685.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:25.364Z,1478889685.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:25.659Z,1478889685.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:26.036Z,1478889686.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:26.160Z,1478889686.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:26.437Z,1478889686.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:26.843Z,1478889686.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:26.956Z,1478889686.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:27.221Z,1478889687.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:27.372Z,1478889687.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:27.629Z,1478889687.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:28.027Z,1478889688.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:28.168Z,1478889688.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:28.426Z,1478889688.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:28.845Z,1478889688.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:28.964Z,1478889688.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:29.225Z,1478889689.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:29.396Z,1478889689.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:29.624Z,1478889689.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:30.027Z,1478889690.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:30.192Z,1478889690.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:30.431Z,1478889690.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:30.837Z,1478889690.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:31.000Z,1478889691.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:31.253Z,1478889691.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:31.444Z,1478889691.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:31.638Z,1478889691.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:32.030Z,1478889692.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:32.241Z,1478889692.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:32.435Z,1478889692.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:32.840Z,1478889692.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:33.036Z,1478889693.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:33.237Z,1478889693.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:33.637Z,1478889693.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:33.800Z,1478889693.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:34.040Z,1478889694.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:34.436Z,1478889694.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:34.596Z,1478889694.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:34.838Z,1478889694.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:35.237Z,1478889695.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:35.393Z,1478889695.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:35.636Z,1478889695.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:35.800Z,1478889695.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:36.033Z,1478889696.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:36.436Z,1478889696.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:36.596Z,1478889696.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:36.832Z,1478889696.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:37.232Z,1478889697.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:37.356Z,1478889697.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:37.676Z,1478889697.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:38.027Z,1478889698.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:38.152Z,1478889698.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:38.444Z,1478889698.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:38.877Z,1478889698.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:38.948Z,1478889698.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:39.220Z,1478889699.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:39.364Z,1478889699.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:39.661Z,1478889699.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:40.058Z,1478889700.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:40.160Z,1478889700.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:40.426Z,1478889700.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:40.828Z,1478889700.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:40.956Z,1478889700.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:41.233Z,1478889701.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:41.364Z,1478889701.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:41.627Z,1478889701.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:42.029Z,1478889702.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:42.160Z,1478889702.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:42.438Z,1478889702.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:42.830Z,1478889702.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:42.956Z,1478889702.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:43.237Z,1478889703.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:43.364Z,1478889703.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:43.640Z,1478889703.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:44.042Z,1478889704.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:44.160Z,1478889704.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:44.440Z,1478889704.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:44.840Z,1478889704.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:44.962Z,1478889704.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:45.248Z,1478889705.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:45.420Z,1478889705.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:45.633Z,1478889705.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:46.028Z,1478889706.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:46.216Z,1478889706.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:46.426Z,1478889706.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:46.828Z,1478889706.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:47.012Z,1478889707.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:47.239Z,1478889707.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:47.629Z,1478889707.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:47.780Z,1478889707.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:48.038Z,1478889708.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:48.441Z,1478889708.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:48.576Z,1478889708.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:48.841Z,1478889708.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:49.242Z,1478889709.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:49.372Z,1478889709.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:49.627Z,1478889709.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:49.780Z,1478889709.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:50.027Z,1478889710.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:50.426Z,1478889710.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:50.576Z,1478889710.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:50.826Z,1478889710.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:51.240Z,1478889711.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:51.340Z,1478889711.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:51.660Z,1478889711.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:52.117Z,1478889712.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:52.136Z,1478889712.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:52.442Z,1478889712.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:52.900Z,1478889712.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:52.932Z,1478889712.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:53.293Z,1478889713.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:53.388Z,1478889713.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:53.664Z,1478889713.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:54.033Z,1478889714.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:54.184Z,1478889714.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:54.459Z,1478889714.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:54.900Z,1478889714.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:54.980Z,1478889714.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:55.254Z,1478889715.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:55.388Z,1478889715.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:55.641Z,1478889715.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:56.042Z,1478889716.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:56.184Z,1478889716.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:56.461Z,1478889716.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:56.821Z,1478889716.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:56.980Z,1478889716.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:57.229Z,1478889717.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:57.388Z,1478889717.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:57.633Z,1478889717.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:58.037Z,1478889718.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:58.185Z,1478889718.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:58.430Z,1478889718.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:58.841Z,1478889718.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:58.981Z,1478889718.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:59.259Z,1478889719.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:41:59.424Z,1478889719.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:41:59.629Z,1478889719.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:00.055Z,1478889720.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:00.220Z,1478889720.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:00.453Z,1478889720.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:00.840Z,1478889720.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:01.016Z,1478889721.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:01.269Z,1478889721.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:01.625Z,1478889721.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:01.812Z,1478889721.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:02.036Z,1478889722.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:02.220Z,1478889722.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:02.432Z,1478889722.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:02.863Z,1478889722.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:03.016Z,1478889723.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:03.253Z,1478889723.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:03.654Z,1478889723.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:03.776Z,1478889723.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:04.044Z,1478889724.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:04.454Z,1478889724.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:04.572Z,1478889724.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:04.922Z,1478889724.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:05.241Z,1478889725.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:05.368Z,1478889725.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:05.626Z,1478889725.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:05.776Z,1478889725.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:06.073Z,1478889726.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:06.498Z,1478889726.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:06.572Z,1478889726.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:06.921Z,1478889726.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:07.265Z,1478889727.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:07.304Z,1478889727.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:08.100Z,1478889728.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:08.897Z,1478889728.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:09.324Z,1478889729.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:10.120Z,1478889730.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:10.916Z,1478889730.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:11.324Z,1478889731.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:12.120Z,1478889732.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:12.917Z,1478889732.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:13.412Z,1478889733.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:14.208Z,1478889734.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:14.231Z,1478889734.231 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:14.231Z,1478889734.231 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 257
2016-11-11T18:42:14.231Z,1478889734.231 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:42:14.237Z,1478889734.237 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:14.238Z,1478889734.238 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 257
2016-11-11T18:42:14.238Z,1478889734.238 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:42:14.240Z,1478889734.240 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:14.240Z,1478889734.240 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 257
2016-11-11T18:42:14.240Z,1478889734.240 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:42:14.315Z,1478889734.315 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:42:14.315Z,1478889734.315 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:42:14.315Z,1478889734.315 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:42:14.495Z,1478889734.495 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:42:14.495Z,1478889734.495 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 257
2016-11-11T18:42:14.496Z,1478889734.496 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:42:14.496Z,1478889734.496 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 257
2016-11-11T18:42:14.497Z,1478889734.497 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:42:14.497Z,1478889734.497 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 257
2016-11-11T18:42:14.812Z,1478889734.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:42:14.813Z,1478889734.813 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:42:14.813Z,1478889734.813 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:42:14.822Z,1478889734.822 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:42:14.827Z,1478889734.827 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:42:14.828Z,1478889734.828 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:42:14.828Z,1478889734.828 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:42:14.829Z,1478889734.829 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:42:14.829Z,1478889734.829 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:42:15.005Z,1478889735.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:15.188Z,1478889735.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:15.586Z,1478889735.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:15.764Z,1478889735.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:15.974Z,1478889735.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:16.418Z,1478889736.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:16.560Z,1478889736.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:16.784Z,1478889736.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:17.196Z,1478889737.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:17.356Z,1478889737.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:17.601Z,1478889737.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:17.772Z,1478889737.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:17.974Z,1478889737.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:18.403Z,1478889738.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:18.568Z,1478889738.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:18.785Z,1478889738.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:19.171Z,1478889739.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:19.308Z,1478889739.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:19.602Z,1478889739.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:19.978Z,1478889739.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:20.104Z,1478889740.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:20.390Z,1478889740.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:20.826Z,1478889740.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:20.900Z,1478889740.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:21.203Z,1478889741.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:21.320Z,1478889741.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:21.586Z,1478889741.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:21.978Z,1478889741.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:22.116Z,1478889742.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:22.385Z,1478889742.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:22.838Z,1478889742.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:22.912Z,1478889742.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:23.214Z,1478889743.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:23.647Z,1478889743.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:23.708Z,1478889743.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:23.971Z,1478889743.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:24.372Z,1478889744.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:24.504Z,1478889744.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:24.794Z,1478889744.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:25.182Z,1478889745.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:25.300Z,1478889745.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:25.589Z,1478889745.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:25.969Z,1478889745.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:26.096Z,1478889746.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:26.368Z,1478889746.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:26.813Z,1478889746.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:26.892Z,1478889746.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:27.204Z,1478889747.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:27.571Z,1478889747.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:27.688Z,1478889747.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:27.977Z,1478889747.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:28.382Z,1478889748.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:28.484Z,1478889748.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:28.817Z,1478889748.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:29.181Z,1478889749.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:29.281Z,1478889749.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:29.626Z,1478889749.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:30.008Z,1478889750.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:30.076Z,1478889750.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:30.393Z,1478889750.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:30.788Z,1478889750.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:30.873Z,1478889750.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:31.186Z,1478889751.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:31.567Z,1478889751.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:31.668Z,1478889751.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:31.969Z,1478889751.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:32.370Z,1478889752.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:32.464Z,1478889752.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:32.783Z,1478889752.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:33.177Z,1478889753.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:33.260Z,1478889753.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:33.572Z,1478889753.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:33.989Z,1478889753.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:34.056Z,1478889754.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:34.380Z,1478889754.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:34.784Z,1478889754.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:34.852Z,1478889754.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:35.187Z,1478889755.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:35.580Z,1478889755.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:35.648Z,1478889755.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:35.980Z,1478889755.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:36.383Z,1478889756.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:36.444Z,1478889756.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:36.804Z,1478889756.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:37.180Z,1478889757.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:37.240Z,1478889757.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:37.592Z,1478889757.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:37.993Z,1478889757.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:38.036Z,1478889758.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:38.367Z,1478889758.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:38.813Z,1478889758.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:38.832Z,1478889758.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:39.176Z,1478889759.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:39.571Z,1478889759.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:39.628Z,1478889759.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:40.041Z,1478889760.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:40.393Z,1478889760.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:40.424Z,1478889760.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:40.774Z,1478889760.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:41.188Z,1478889761.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:41.220Z,1478889761.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:41.590Z,1478889761.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:41.628Z,1478889761.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:42.022Z,1478889762.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:42.036Z,1478889762.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:42.412Z,1478889762.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:42.444Z,1478889762.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:42.787Z,1478889762.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:42.852Z,1478889762.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:43.176Z,1478889763.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:43.260Z,1478889763.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:43.571Z,1478889763.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:43.672Z,1478889763.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:44.017Z,1478889764.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:44.080Z,1478889764.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:44.370Z,1478889764.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:44.488Z,1478889764.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:44.809Z,1478889764.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:44.896Z,1478889764.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:45.176Z,1478889765.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:45.304Z,1478889765.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:45.598Z,1478889765.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:45.713Z,1478889765.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:45.987Z,1478889765.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:46.124Z,1478889766.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:46.389Z,1478889766.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:46.806Z,1478889766.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:46.920Z,1478889766.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:47.169Z,1478889767.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:47.332Z,1478889767.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:47.576Z,1478889767.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:47.971Z,1478889767.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:48.128Z,1478889768.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:48.370Z,1478889768.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:48.829Z,1478889768.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:48.924Z,1478889768.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:49.178Z,1478889769.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:49.332Z,1478889769.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:49.585Z,1478889769.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:49.000Z,1478889770.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:50.129Z,1478889770.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:50.368Z,1478889770.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:50.826Z,1478889770.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:50.924Z,1478889770.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:51.185Z,1478889771.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:51.332Z,1478889771.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:51.577Z,1478889771.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:51.987Z,1478889771.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:52.128Z,1478889772.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:52.382Z,1478889772.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:52.829Z,1478889772.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:52.924Z,1478889772.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:53.189Z,1478889773.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:53.332Z,1478889773.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:53.602Z,1478889773.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:53.976Z,1478889773.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:54.128Z,1478889774.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:54.377Z,1478889774.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:54.802Z,1478889774.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:54.924Z,1478889774.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:55.175Z,1478889775.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:55.332Z,1478889775.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:55.575Z,1478889775.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:55.989Z,1478889775.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:56.128Z,1478889776.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:56.373Z,1478889776.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:56.782Z,1478889776.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:56.924Z,1478889776.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:57.185Z,1478889777.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:57.625Z,1478889777.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:57.696Z,1478889777.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:57.986Z,1478889777.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:58.379Z,1478889778.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:58.492Z,1478889778.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:58.805Z,1478889778.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:59.247Z,1478889779.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:59.288Z,1478889779.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:42:59.605Z,1478889779.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:42:59.696Z,1478889779.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:00.005Z,1478889780.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:00.391Z,1478889780.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:00.492Z,1478889780.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:00.814Z,1478889780.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:01.193Z,1478889781.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:01.236Z,1478889781.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:01.601Z,1478889781.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:02.002Z,1478889782.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:02.040Z,1478889782.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:02.377Z,1478889782.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:02.821Z,1478889782.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:02.836Z,1478889782.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:03.177Z,1478889783.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:03.244Z,1478889783.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:03.572Z,1478889783.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:03.981Z,1478889783.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:04.040Z,1478889784.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:04.389Z,1478889784.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:04.809Z,1478889784.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:04.836Z,1478889784.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:05.165Z,1478889785.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:05.268Z,1478889785.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:05.577Z,1478889785.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:05.996Z,1478889785.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:06.064Z,1478889786.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:06.373Z,1478889786.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:06.807Z,1478889786.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:06.860Z,1478889786.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:07.176Z,1478889787.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:07.268Z,1478889787.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:07.579Z,1478889787.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:08.064Z,1478889788.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:08.861Z,1478889788.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:09.292Z,1478889789.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:10.088Z,1478889790.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:10.884Z,1478889790.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:11.043Z,1478889791.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:11.261Z,1478889791.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:11.598Z,1478889791.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:11.680Z,1478889791.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:12.014Z,1478889792.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:12.088Z,1478889792.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:12.441Z,1478889792.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:12.800Z,1478889792.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:12.885Z,1478889792.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:13.267Z,1478889793.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:13.600Z,1478889793.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:13.656Z,1478889793.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:14.014Z,1478889794.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:14.425Z,1478889794.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:14.452Z,1478889794.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:14.831Z,1478889794.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:15.213Z,1478889795.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:15.216Z,1478889795.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:15.593Z,1478889795.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:16.012Z,1478889796.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:16.014Z,1478889796.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:16.393Z,1478889796.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:16.794Z,1478889796.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:16.812Z,1478889796.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:17.195Z,1478889797.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:17.220Z,1478889797.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:17.601Z,1478889797.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:17.995Z,1478889797.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:18.016Z,1478889798.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:18.395Z,1478889798.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:18.803Z,1478889798.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:18.812Z,1478889798.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:19.199Z,1478889799.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:19.228Z,1478889799.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:19.596Z,1478889799.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:20.001Z,1478889800.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:20.048Z,1478889800.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:20.401Z,1478889800.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:20.801Z,1478889800.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:20.844Z,1478889800.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:21.205Z,1478889801.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:21.252Z,1478889801.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:21.606Z,1478889801.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:21.998Z,1478889801.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:22.048Z,1478889802.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:22.398Z,1478889802.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:22.844Z,1478889802.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:22.850Z,1478889802.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:23.208Z,1478889803.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:23.304Z,1478889803.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:23.593Z,1478889803.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:23.993Z,1478889803.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:24.101Z,1478889804.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:24.391Z,1478889804.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:24.793Z,1478889804.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:24.896Z,1478889804.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:25.275Z,1478889805.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:25.604Z,1478889805.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:25.644Z,1478889805.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:25.994Z,1478889805.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:26.405Z,1478889806.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:26.440Z,1478889806.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:26.853Z,1478889806.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:27.236Z,1478889807.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:27.238Z,1478889807.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:27.629Z,1478889807.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:27.680Z,1478889807.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:27.992Z,1478889807.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:28.423Z,1478889808.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:28.476Z,1478889808.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:28.825Z,1478889808.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:29.188Z,1478889809.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:29.272Z,1478889809.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:29.593Z,1478889809.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:29.996Z,1478889809.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:30.068Z,1478889810.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:30.394Z,1478889810.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:30.801Z,1478889810.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:30.864Z,1478889810.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:31.200Z,1478889811.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:31.272Z,1478889811.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:31.596Z,1478889811.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:32.004Z,1478889812.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:32.068Z,1478889812.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:32.400Z,1478889812.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:32.795Z,1478889812.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:32.864Z,1478889812.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:33.205Z,1478889813.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:33.272Z,1478889813.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:33.605Z,1478889813.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:33.998Z,1478889813.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:34.068Z,1478889814.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:34.404Z,1478889814.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:34.801Z,1478889814.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:34.864Z,1478889814.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:35.197Z,1478889815.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:35.272Z,1478889815.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:35.604Z,1478889815.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:36.005Z,1478889816.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:36.068Z,1478889816.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:36.398Z,1478889816.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:36.857Z,1478889816.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:36.864Z,1478889816.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:37.209Z,1478889817.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:37.272Z,1478889817.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:37.608Z,1478889817.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:38.007Z,1478889818.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:38.068Z,1478889818.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:38.409Z,1478889818.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:38.817Z,1478889818.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:38.864Z,1478889818.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:39.236Z,1478889819.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:39.605Z,1478889819.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:39.624Z,1478889819.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:40.018Z,1478889820.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:40.393Z,1478889820.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:40.420Z,1478889820.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:40.829Z,1478889820.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:41.216Z,1478889821.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:41.255Z,1478889821.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:41.597Z,1478889821.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:41.624Z,1478889821.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:42.035Z,1478889822.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:42.396Z,1478889822.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:42.436Z,1478889822.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:42.818Z,1478889822.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:43.104Z,1478889823.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:43.236Z,1478889823.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:43.596Z,1478889823.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:43.900Z,1478889823.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:43.995Z,1478889823.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:44.401Z,1478889824.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:44.697Z,1478889824.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:44.801Z,1478889824.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:45.108Z,1478889825.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:45.204Z,1478889825.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:45.606Z,1478889825.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:45.904Z,1478889825.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:45.998Z,1478889825.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:46.404Z,1478889826.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:46.701Z,1478889826.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:46.802Z,1478889826.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:47.112Z,1478889827.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:47.196Z,1478889827.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:47.604Z,1478889827.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:47.908Z,1478889827.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:48.007Z,1478889828.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:48.398Z,1478889828.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:48.705Z,1478889828.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:48.803Z,1478889828.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:49.116Z,1478889829.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:49.206Z,1478889829.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:49.596Z,1478889829.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:49.912Z,1478889829.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:50.005Z,1478889830.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:50.406Z,1478889830.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:50.708Z,1478889830.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:50.846Z,1478889830.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:51.197Z,1478889831.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:51.224Z,1478889831.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:51.601Z,1478889831.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:51.999Z,1478889831.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:52.020Z,1478889832.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:52.404Z,1478889832.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:52.800Z,1478889832.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:52.816Z,1478889832.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:53.234Z,1478889833.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:53.540Z,1478889833.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:53.594Z,1478889833.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:53.993Z,1478889833.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:54.336Z,1478889834.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:54.401Z,1478889834.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:54.802Z,1478889834.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:55.133Z,1478889835.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:55.277Z,1478889835.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:55.544Z,1478889835.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:55.598Z,1478889835.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:56.038Z,1478889836.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:56.340Z,1478889836.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:56.399Z,1478889836.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:56.844Z,1478889836.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:57.072Z,1478889837.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:57.241Z,1478889837.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:57.604Z,1478889837.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:57.881Z,1478889837.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:57.998Z,1478889837.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:58.412Z,1478889838.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:58.677Z,1478889838.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:58.808Z,1478889838.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:59.092Z,1478889839.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:59.198Z,1478889839.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:59.596Z,1478889839.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:43:59.888Z,1478889839.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:43:59.997Z,1478889839.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:00.402Z,1478889840.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:00.685Z,1478889840.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:00.809Z,1478889840.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:01.096Z,1478889841.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:01.206Z,1478889841.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:01.601Z,1478889841.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:01.892Z,1478889841.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:02.004Z,1478889842.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:02.406Z,1478889842.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:02.688Z,1478889842.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:02.806Z,1478889842.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:03.096Z,1478889843.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:03.204Z,1478889843.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:03.597Z,1478889843.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:03.892Z,1478889843.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:03.999Z,1478889843.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:04.405Z,1478889844.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:04.688Z,1478889844.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:04.844Z,1478889844.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:05.192Z,1478889845.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:05.201Z,1478889845.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:05.604Z,1478889845.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:05.988Z,1478889845.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:06.005Z,1478889846.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:06.408Z,1478889846.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:06.784Z,1478889846.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:06.813Z,1478889846.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:07.202Z,1478889847.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:07.520Z,1478889847.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:07.597Z,1478889847.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:08.316Z,1478889848.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:09.113Z,1478889849.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:09.536Z,1478889849.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:10.332Z,1478889850.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:11.060Z,1478889851.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:11.285Z,1478889851.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:11.421Z,1478889851.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:11.828Z,1478889851.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:11.856Z,1478889851.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:12.190Z,1478889852.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:12.646Z,1478889852.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:12.652Z,1478889852.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:13.006Z,1478889853.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:13.068Z,1478889853.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:13.377Z,1478889853.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:13.775Z,1478889853.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:13.864Z,1478889853.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:14.181Z,1478889854.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:14.580Z,1478889854.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:14.661Z,1478889854.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:14.997Z,1478889854.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:15.072Z,1478889855.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:15.371Z,1478889855.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:15.781Z,1478889855.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:15.892Z,1478889855.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:16.183Z,1478889856.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:16.579Z,1478889856.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:16.688Z,1478889856.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:16.985Z,1478889856.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:17.096Z,1478889857.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:17.380Z,1478889857.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:17.788Z,1478889857.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:17.892Z,1478889857.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:18.190Z,1478889858.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:18.582Z,1478889858.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:18.688Z,1478889858.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:18.985Z,1478889858.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:19.148Z,1478889859.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:19.389Z,1478889859.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:19.786Z,1478889859.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:19.944Z,1478889859.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:20.185Z,1478889860.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:20.587Z,1478889860.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:20.740Z,1478889860.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:20.986Z,1478889860.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:21.385Z,1478889861.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:21.504Z,1478889861.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:21.779Z,1478889861.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:22.180Z,1478889862.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:22.300Z,1478889862.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:22.585Z,1478889862.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:22.979Z,1478889862.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:23.097Z,1478889863.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:23.388Z,1478889863.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:23.516Z,1478889863.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:23.784Z,1478889863.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:24.189Z,1478889864.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:24.312Z,1478889864.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:24.582Z,1478889864.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:25.019Z,1478889865.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:25.048Z,1478889865.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:25.431Z,1478889865.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:25.780Z,1478889865.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:25.844Z,1478889865.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:26.185Z,1478889866.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:26.640Z,1478889866.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:26.653Z,1478889866.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:26.989Z,1478889866.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:27.052Z,1478889867.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:27.410Z,1478889867.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:27.788Z,1478889867.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:27.848Z,1478889867.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:28.234Z,1478889868.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:28.645Z,1478889868.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:28.657Z,1478889868.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:28.979Z,1478889868.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:29.056Z,1478889869.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:29.389Z,1478889869.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:29.781Z,1478889869.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:29.852Z,1478889869.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:30.179Z,1478889870.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:30.644Z,1478889870.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:30.648Z,1478889870.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:30.989Z,1478889870.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:31.056Z,1478889871.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:31.379Z,1478889871.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:31.783Z,1478889871.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:31.852Z,1478889871.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:32.188Z,1478889872.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:32.586Z,1478889872.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:32.648Z,1478889872.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:32.980Z,1478889872.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:33.124Z,1478889873.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:33.389Z,1478889873.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:33.790Z,1478889873.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:33.920Z,1478889873.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:34.191Z,1478889874.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:34.589Z,1478889874.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:34.716Z,1478889874.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:34.982Z,1478889874.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:35.405Z,1478889875.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:35.480Z,1478889875.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:35.785Z,1478889875.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:36.179Z,1478889876.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:36.276Z,1478889876.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:36.580Z,1478889876.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:36.985Z,1478889876.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:37.073Z,1478889877.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:37.392Z,1478889877.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:37.492Z,1478889877.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:37.789Z,1478889877.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:38.197Z,1478889878.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:38.288Z,1478889878.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:38.640Z,1478889878.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:38.980Z,1478889878.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:39.013Z,1478889879.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:39.380Z,1478889879.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:39.808Z,1478889879.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:39.821Z,1478889879.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:40.202Z,1478889880.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:40.605Z,1478889880.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:40.654Z,1478889880.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:41.016Z,1478889881.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:41.022Z,1478889881.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:41.375Z,1478889881.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:41.812Z,1478889881.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:41.818Z,1478889881.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:42.222Z,1478889882.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:42.609Z,1478889882.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:42.638Z,1478889882.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:43.005Z,1478889883.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:43.020Z,1478889883.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:43.379Z,1478889883.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:43.785Z,1478889883.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:43.816Z,1478889883.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:44.185Z,1478889884.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:44.613Z,1478889884.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:44.658Z,1478889884.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:44.998Z,1478889884.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:45.024Z,1478889885.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:45.385Z,1478889885.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:45.778Z,1478889885.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:45.820Z,1478889885.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:46.183Z,1478889886.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:46.582Z,1478889886.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:46.616Z,1478889886.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:46.985Z,1478889886.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:47.116Z,1478889887.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:47.380Z,1478889887.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:47.799Z,1478889887.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:47.912Z,1478889887.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:48.182Z,1478889888.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:48.588Z,1478889888.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:48.708Z,1478889888.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:48.999Z,1478889888.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:49.384Z,1478889889.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:49.473Z,1478889889.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:49.778Z,1478889889.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:50.185Z,1478889890.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:50.272Z,1478889890.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:50.581Z,1478889890.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:50.997Z,1478889890.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:51.071Z,1478889891.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:51.389Z,1478889891.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:51.484Z,1478889891.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:51.792Z,1478889891.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:52.190Z,1478889892.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:52.280Z,1478889892.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:52.632Z,1478889892.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:52.990Z,1478889892.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:53.016Z,1478889893.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:53.380Z,1478889893.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:53.783Z,1478889893.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:53.812Z,1478889893.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:54.237Z,1478889894.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:54.609Z,1478889894.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:54.680Z,1478889894.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:55.005Z,1478889895.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:55.016Z,1478889895.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:55.408Z,1478889895.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:55.775Z,1478889895.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:55.812Z,1478889895.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:56.220Z,1478889896.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:56.608Z,1478889896.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:56.673Z,1478889896.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:57.001Z,1478889897.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:57.016Z,1478889897.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:57.370Z,1478889897.370 [PNI_TCM](ERROR): CRC does not match. Expected:0x19738 got:0x16962
2016-11-11T18:44:57.406Z,1478889897.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:57.805Z,1478889897.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:57.812Z,1478889897.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:58.183Z,1478889898.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:58.610Z,1478889898.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:58.665Z,1478889898.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:58.985Z,1478889898.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:59.028Z,1478889899.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:44:59.398Z,1478889899.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:59.791Z,1478889899.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:44:59.824Z,1478889899.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:00.193Z,1478889900.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:00.584Z,1478889900.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:00.620Z,1478889900.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:00.994Z,1478889900.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:01.088Z,1478889901.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:01.395Z,1478889901.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:01.791Z,1478889901.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:01.884Z,1478889901.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:02.174Z,1478889902.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:02.591Z,1478889902.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:02.680Z,1478889902.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:02.979Z,1478889902.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:03.389Z,1478889903.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:03.444Z,1478889903.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:03.792Z,1478889903.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:04.201Z,1478889904.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:04.240Z,1478889904.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:04.569Z,1478889904.569 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T18:45:04.609Z,1478889904.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:04.971Z,1478889904.971 [PNI_TCM](ERROR): CRC does not match. Expected:0x27675 got:0x64608
2016-11-11T18:45:05.037Z,1478889905.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:05.066Z,1478889905.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:05.383Z,1478889905.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:05.448Z,1478889905.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:05.809Z,1478889905.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:06.189Z,1478889906.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:06.244Z,1478889906.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:06.640Z,1478889906.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:06.657Z,1478889906.657 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T18:45:06.657Z,1478889906.657 [Default:CheckIn:C.Wait] Stopped
2016-11-11T18:45:06.658Z,1478889906.658 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T18:45:06.658Z,1478889906.658 [Default:CheckIn:D] Running Loop=1
2016-11-11T18:45:06.979Z,1478889906.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:07.004Z,1478889907.004 [Default:CheckIn:D] Stopped
2016-11-11T18:45:07.004Z,1478889907.004 [Default:CheckIn:E] Running Loop=1
2016-11-11T18:45:07.012Z,1478889907.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:07.401Z,1478889907.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:07.410Z,1478889907.410 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 835.094922 min 
2016-11-11T18:45:07.411Z,1478889907.411 [Default:CheckIn:E] Stopped
2016-11-11T18:45:07.411Z,1478889907.411 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T18:45:07.411Z,1478889907.411 [Default:CheckIn] Stopped
2016-11-11T18:45:07.411Z,1478889907.411 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T18:45:07.411Z,1478889907.411 [Default:CheckIn](INFO): Running loop #81
2016-11-11T18:45:07.412Z,1478889907.411 [Default:CheckIn] Running Loop=81
2016-11-11T18:45:07.412Z,1478889907.412 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T18:45:07.412Z,1478889907.412 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T18:45:07.774Z,1478889907.774 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T18:45:07.808Z,1478889907.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:07.814Z,1478889907.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:08.604Z,1478889908.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:09.012Z,1478889909.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:09.808Z,1478889909.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:10.604Z,1478889910.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:11.012Z,1478889911.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:11.178Z,1478889911.178 [NAL9602](INFO): Powering up
2016-11-11T18:45:11.301Z,1478889911.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:11.422Z,1478889911.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:11.808Z,1478889911.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:11.814Z,1478889911.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:12.197Z,1478889912.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:12.604Z,1478889912.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:12.646Z,1478889912.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:13.016Z,1478889913.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:13.037Z,1478889913.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:13.391Z,1478889913.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:13.805Z,1478889913.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:13.812Z,1478889913.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:14.205Z,1478889914.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:14.596Z,1478889914.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:14.608Z,1478889914.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:15.000Z,1478889915.000 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:15.001Z,1478889915.000 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 258
2016-11-11T18:45:15.001Z,1478889915.001 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:45:15.007Z,1478889915.007 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:15.007Z,1478889915.007 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 258
2016-11-11T18:45:15.007Z,1478889915.007 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:45:15.009Z,1478889915.010 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:15.010Z,1478889915.010 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 258
2016-11-11T18:45:15.010Z,1478889915.010 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:45:15.024Z,1478889915.024 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:45:15.025Z,1478889915.025 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:45:15.025Z,1478889915.025 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:45:15.064Z,1478889915.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:15.434Z,1478889915.434 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:45:15.434Z,1478889915.434 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 258
2016-11-11T18:45:15.439Z,1478889915.439 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:45:15.439Z,1478889915.439 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 258
2016-11-11T18:45:15.440Z,1478889915.440 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:45:15.440Z,1478889915.440 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 258
2016-11-11T18:45:15.788Z,1478889915.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:45:15.788Z,1478889915.788 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:45:15.789Z,1478889915.789 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:45:15.817Z,1478889915.818 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:45:15.818Z,1478889915.818 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:45:15.818Z,1478889915.818 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:45:15.819Z,1478889915.819 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:45:15.820Z,1478889915.819 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:45:15.820Z,1478889915.820 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:45:15.860Z,1478889915.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:16.198Z,1478889916.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:16.592Z,1478889916.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:16.656Z,1478889916.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:17.046Z,1478889917.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:17.405Z,1478889917.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:17.420Z,1478889917.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:17.805Z,1478889917.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:18.205Z,1478889918.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:18.216Z,1478889918.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:18.604Z,1478889918.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:19.012Z,1478889919.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:19.055Z,1478889919.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:19.389Z,1478889919.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:19.428Z,1478889919.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:19.793Z,1478889919.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:20.197Z,1478889920.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:20.224Z,1478889920.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:20.637Z,1478889920.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:20.962Z,1478889920.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:21.003Z,1478889921.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:21.411Z,1478889921.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:21.756Z,1478889921.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:21.807Z,1478889921.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:22.156Z,1478889922.156 [NAL9602](INFO): NAL9602 initialized
2016-11-11T18:45:22.213Z,1478889922.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:22.553Z,1478889922.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:22.626Z,1478889922.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:22.960Z,1478889922.960 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T18:45:22.960Z,1478889922.960 [NAL9602] Data Fault, FailCount= 3
2016-11-11T18:45:22.960Z,1478889922.960 [NAL9602](ERROR): Data Fault
2016-11-11T18:45:22.965Z,1478889922.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:22.993Z,1478889922.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:23.037Z,1478889923.037 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T18:45:23.364Z,1478889923.364 [NAL9602](INFO): Powering down
2016-11-11T18:45:23.401Z,1478889923.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:23.765Z,1478889923.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:23.798Z,1478889923.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:24.202Z,1478889924.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:24.222Z,1478889924.222 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T18:45:24.222Z,1478889924.222 [NAL9602] No Fault, FailCount= 3
2016-11-11T18:45:24.562Z,1478889924.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:24.637Z,1478889924.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:24.972Z,1478889924.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:25.053Z,1478889925.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:25.404Z,1478889925.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:25.769Z,1478889925.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:25.817Z,1478889925.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:26.204Z,1478889926.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:26.564Z,1478889926.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:26.643Z,1478889926.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:26.972Z,1478889926.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:27.017Z,1478889927.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:27.403Z,1478889927.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:27.769Z,1478889927.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:27.806Z,1478889927.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:28.204Z,1478889928.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:28.553Z,1478889928.553 [NAL9602](INFO): Powering up NAL9602
2016-11-11T18:45:28.565Z,1478889928.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:28.586Z,1478889928.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:28.997Z,1478889928.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:29.052Z,1478889929.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:29.391Z,1478889929.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:29.794Z,1478889929.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:29.848Z,1478889929.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:30.197Z,1478889930.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:30.592Z,1478889930.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:30.644Z,1478889930.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:31.071Z,1478889931.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:31.404Z,1478889931.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:31.428Z,1478889931.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:31.800Z,1478889931.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:32.203Z,1478889932.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:32.224Z,1478889932.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:32.609Z,1478889932.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:33.020Z,1478889933.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:33.104Z,1478889933.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:33.389Z,1478889933.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:33.428Z,1478889933.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:33.788Z,1478889933.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:34.191Z,1478889934.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:34.224Z,1478889934.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:34.613Z,1478889934.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:34.924Z,1478889934.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:35.005Z,1478889935.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:35.400Z,1478889935.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:35.720Z,1478889935.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:35.801Z,1478889935.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:36.214Z,1478889936.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:36.517Z,1478889936.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:36.624Z,1478889936.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:36.932Z,1478889936.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:36.993Z,1478889936.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:37.391Z,1478889937.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:37.729Z,1478889937.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:37.797Z,1478889937.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:38.197Z,1478889938.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:38.525Z,1478889938.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:38.621Z,1478889938.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:38.936Z,1478889938.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:39.010Z,1478889939.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:39.353Z,1478889939.353 [NAL9602](INFO): NAL9602 initialized
2016-11-11T18:45:39.429Z,1478889939.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:39.732Z,1478889939.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:39.812Z,1478889939.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:40.206Z,1478889940.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:40.529Z,1478889940.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:40.619Z,1478889940.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:40.940Z,1478889940.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:41.013Z,1478889941.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:41.388Z,1478889941.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:41.736Z,1478889941.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:41.789Z,1478889941.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:42.186Z,1478889942.186 [BPC1](ERROR): Failed to receive battery data
2016-11-11T18:45:42.186Z,1478889942.186 [BPC1] Communications Fault, FailCount= 1
2016-11-11T18:45:42.186Z,1478889942.186 [BPC1](ERROR): Communications Fault
2016-11-11T18:45:42.195Z,1478889942.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:42.251Z,1478889942.251 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T18:45:42.532Z,1478889942.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:42.663Z,1478889942.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:43.005Z,1478889943.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:43.048Z,1478889943.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:43.412Z,1478889943.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:43.456Z,1478889943.456 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:45:43.456Z,1478889943.456 [BPC1] No Fault, FailCount= 1
2016-11-11T18:45:43.844Z,1478889943.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:43.846Z,1478889943.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:44.225Z,1478889944.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:44.593Z,1478889944.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:44.640Z,1478889944.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:45.048Z,1478889945.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:45.410Z,1478889945.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:45.412Z,1478889945.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:45.809Z,1478889945.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:46.189Z,1478889946.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:46.208Z,1478889946.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:46.591Z,1478889946.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:47.012Z,1478889947.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:47.054Z,1478889947.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:47.408Z,1478889947.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:47.428Z,1478889947.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:47.795Z,1478889947.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:48.205Z,1478889948.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:48.224Z,1478889948.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:48.593Z,1478889948.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:48.900Z,1478889948.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:48.993Z,1478889948.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:49.437Z,1478889949.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:49.696Z,1478889949.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:49.800Z,1478889949.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:50.203Z,1478889950.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:50.493Z,1478889950.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:50.621Z,1478889950.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:50.904Z,1478889950.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:51.001Z,1478889951.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:51.414Z,1478889951.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:51.700Z,1478889951.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:51.817Z,1478889951.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:52.209Z,1478889952.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:52.497Z,1478889952.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:52.597Z,1478889952.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:52.908Z,1478889952.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:52.993Z,1478889952.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:53.393Z,1478889953.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:53.707Z,1478889953.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:53.798Z,1478889953.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:54.189Z,1478889954.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:54.516Z,1478889954.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:54.599Z,1478889954.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:54.928Z,1478889954.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:54.999Z,1478889954.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:55.394Z,1478889955.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:55.725Z,1478889955.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:55.796Z,1478889955.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:56.213Z,1478889956.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:56.520Z,1478889956.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:56.666Z,1478889956.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:56.992Z,1478889956.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:57.016Z,1478889957.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:57.397Z,1478889957.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:57.795Z,1478889957.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:57.812Z,1478889957.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:58.199Z,1478889958.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:58.597Z,1478889958.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:58.608Z,1478889958.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:59.024Z,1478889959.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:59.362Z,1478889959.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:45:59.401Z,1478889959.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:45:59.800Z,1478889959.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:00.156Z,1478889960.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:00.201Z,1478889960.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:00.599Z,1478889960.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:00.952Z,1478889960.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:01.042Z,1478889961.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:01.365Z,1478889961.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:01.411Z,1478889961.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:01.785Z,1478889961.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:02.162Z,1478889962.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:02.188Z,1478889962.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:02.607Z,1478889962.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:02.880Z,1478889962.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:03.001Z,1478889963.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:03.395Z,1478889963.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:03.676Z,1478889963.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:03.810Z,1478889963.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:04.202Z,1478889964.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:04.473Z,1478889964.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:04.600Z,1478889964.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:04.884Z,1478889964.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:05.051Z,1478889965.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:05.407Z,1478889965.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:05.680Z,1478889965.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:05.826Z,1478889965.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:06.220Z,1478889966.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:06.477Z,1478889966.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:06.620Z,1478889966.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:06.892Z,1478889966.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:06.993Z,1478889966.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:07.397Z,1478889967.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:07.688Z,1478889967.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:07.791Z,1478889967.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:08.485Z,1478889968.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:08.896Z,1478889968.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:09.692Z,1478889969.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:10.488Z,1478889970.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:10.980Z,1478889970.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:11.387Z,1478889971.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:11.406Z,1478889971.406 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T18:46:11.533Z,1478889971.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:11.776Z,1478889971.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:11.905Z,1478889971.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:12.293Z,1478889972.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:12.573Z,1478889972.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:12.703Z,1478889972.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:13.100Z,1478889973.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:13.328Z,1478889973.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:13.513Z,1478889973.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:13.902Z,1478889973.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:14.124Z,1478889974.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:14.305Z,1478889974.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:14.695Z,1478889974.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:14.920Z,1478889974.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:15.093Z,1478889975.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:15.332Z,1478889975.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:15.494Z,1478889975.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:15.892Z,1478889975.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:16.128Z,1478889976.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:16.301Z,1478889976.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:16.706Z,1478889976.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:16.860Z,1478889976.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:17.114Z,1478889977.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:17.500Z,1478889977.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:17.656Z,1478889977.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:17.901Z,1478889977.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:18.302Z,1478889978.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:18.452Z,1478889978.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:18.749Z,1478889978.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:18.864Z,1478889978.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:19.094Z,1478889979.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:19.517Z,1478889979.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:19.660Z,1478889979.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:19.882Z,1478889979.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:20.318Z,1478889980.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:20.457Z,1478889980.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:20.718Z,1478889980.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:20.868Z,1478889980.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:21.125Z,1478889981.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:21.517Z,1478889981.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:21.664Z,1478889981.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:21.893Z,1478889981.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:22.317Z,1478889982.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:22.461Z,1478889982.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:22.713Z,1478889982.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:22.872Z,1478889982.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:23.119Z,1478889983.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:23.486Z,1478889983.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:23.669Z,1478889983.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:23.897Z,1478889983.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:24.294Z,1478889984.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:24.464Z,1478889984.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:24.726Z,1478889984.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:24.960Z,1478889984.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:25.093Z,1478889985.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:25.497Z,1478889985.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:25.758Z,1478889985.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:25.908Z,1478889985.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:26.353Z,1478889986.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:26.552Z,1478889986.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:26.719Z,1478889986.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:27.098Z,1478889987.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:27.308Z,1478889987.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:27.502Z,1478889987.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:27.905Z,1478889987.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:28.104Z,1478889988.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:28.306Z,1478889988.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:28.694Z,1478889988.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:28.901Z,1478889988.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:29.109Z,1478889989.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:29.324Z,1478889989.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:29.483Z,1478889989.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:29.886Z,1478889989.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:30.120Z,1478889990.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:30.293Z,1478889990.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:30.723Z,1478889990.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:30.837Z,1478889990.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:31.105Z,1478889991.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:31.494Z,1478889991.494 [BPC1](ERROR): Failed to parse message.
2016-11-11T18:46:31.495Z,1478889991.494 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T18:46:31.495Z,1478889991.495 [BPC1] Data Fault, FailCount= 1
2016-11-11T18:46:31.495Z,1478889991.495 [BPC1](ERROR): Data Fault
2016-11-11T18:46:31.507Z,1478889991.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:31.562Z,1478889991.562 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T18:46:31.632Z,1478889991.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:31.913Z,1478889991.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:32.304Z,1478889992.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:32.429Z,1478889992.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:32.702Z,1478889992.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:32.721Z,1478889992.721 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:46:32.721Z,1478889992.721 [BPC1] No Fault, FailCount= 1
2016-11-11T18:46:32.848Z,1478889992.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:33.153Z,1478889993.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:33.513Z,1478889993.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:33.644Z,1478889993.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:33.901Z,1478889993.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:34.294Z,1478889994.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:34.441Z,1478889994.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:34.708Z,1478889994.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:34.852Z,1478889994.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:35.083Z,1478889995.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:35.510Z,1478889995.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:35.648Z,1478889995.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:35.909Z,1478889995.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:36.317Z,1478889996.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:36.445Z,1478889996.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:36.714Z,1478889996.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:36.856Z,1478889996.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:37.098Z,1478889997.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:37.543Z,1478889997.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:37.652Z,1478889997.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:37.924Z,1478889997.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:38.290Z,1478889998.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:38.448Z,1478889998.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:38.701Z,1478889998.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:38.936Z,1478889998.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:39.094Z,1478889999.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:39.506Z,1478889999.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:39.732Z,1478889999.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:39.902Z,1478889999.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:40.314Z,1478890000.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:40.528Z,1478890000.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:40.717Z,1478890000.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:41.121Z,1478890001.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:41.292Z,1478890001.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:41.548Z,1478890001.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:41.887Z,1478890001.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:42.088Z,1478890002.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:42.306Z,1478890002.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:42.701Z,1478890002.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:42.885Z,1478890002.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:43.143Z,1478890003.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:43.296Z,1478890003.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:43.501Z,1478890003.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:43.896Z,1478890003.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:44.092Z,1478890004.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:44.329Z,1478890004.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:44.689Z,1478890004.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:44.825Z,1478890004.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:45.091Z,1478890005.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:45.533Z,1478890005.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:45.620Z,1478890005.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:45.910Z,1478890005.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:46.305Z,1478890006.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:46.417Z,1478890006.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:46.726Z,1478890006.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:46.832Z,1478890006.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:47.100Z,1478890007.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:47.524Z,1478890007.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:47.628Z,1478890007.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:47.926Z,1478890007.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:48.300Z,1478890008.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:48.425Z,1478890008.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:48.697Z,1478890008.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:48.836Z,1478890008.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:49.100Z,1478890009.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:49.502Z,1478890009.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:49.632Z,1478890009.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:49.900Z,1478890009.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:50.299Z,1478890010.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:50.429Z,1478890010.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:50.716Z,1478890010.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:50.840Z,1478890010.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:51.114Z,1478890011.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:51.517Z,1478890011.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:51.636Z,1478890011.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:51.896Z,1478890011.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:52.301Z,1478890012.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:52.432Z,1478890012.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:52.698Z,1478890012.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:52.932Z,1478890012.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:53.101Z,1478890013.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:53.497Z,1478890013.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:53.728Z,1478890013.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:53.921Z,1478890013.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:54.343Z,1478890014.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:54.524Z,1478890014.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:54.760Z,1478890014.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:55.102Z,1478890015.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:55.268Z,1478890015.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:55.509Z,1478890015.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:55.938Z,1478890015.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:56.064Z,1478890016.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:56.322Z,1478890016.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:56.737Z,1478890016.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:56.861Z,1478890016.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:57.118Z,1478890017.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:57.272Z,1478890017.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:57.530Z,1478890017.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:57.933Z,1478890017.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:58.068Z,1478890018.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:58.344Z,1478890018.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:58.746Z,1478890018.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:58.804Z,1478890018.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:46:59.127Z,1478890019.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:59.554Z,1478890019.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:46:59.600Z,1478890019.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:00.026Z,1478890020.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:00.322Z,1478890020.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:00.396Z,1478890020.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:00.721Z,1478890020.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:00.808Z,1478890020.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:01.148Z,1478890021.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:01.569Z,1478890021.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:01.604Z,1478890021.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:01.958Z,1478890021.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:02.314Z,1478890022.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:02.401Z,1478890022.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:02.718Z,1478890022.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:02.812Z,1478890022.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:03.163Z,1478890023.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:03.500Z,1478890023.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:03.608Z,1478890023.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:03.925Z,1478890023.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:04.361Z,1478890024.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:04.404Z,1478890024.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:04.708Z,1478890024.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:04.856Z,1478890024.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:05.116Z,1478890025.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:05.501Z,1478890025.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:05.655Z,1478890025.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:05.916Z,1478890025.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:06.325Z,1478890026.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:06.453Z,1478890026.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:06.701Z,1478890026.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:06.900Z,1478890026.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:07.125Z,1478890027.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:07.507Z,1478890027.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:07.696Z,1478890027.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:07.889Z,1478890027.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:08.492Z,1478890028.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:09.252Z,1478890029.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:10.048Z,1478890030.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:10.845Z,1478890030.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:11.257Z,1478890031.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:12.052Z,1478890032.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:12.772Z,1478890032.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:13.568Z,1478890033.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:14.365Z,1478890034.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:14.776Z,1478890034.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:15.314Z,1478890035.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:15.462Z,1478890035.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:15.572Z,1478890035.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:15.870Z,1478890035.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:16.237Z,1478890036.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:16.369Z,1478890036.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:16.658Z,1478890036.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:16.780Z,1478890036.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:17.061Z,1478890037.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:17.437Z,1478890037.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:17.576Z,1478890037.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:17.819Z,1478890037.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:18.222Z,1478890038.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:18.373Z,1478890038.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:18.629Z,1478890038.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:18.786Z,1478890038.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:19.017Z,1478890039.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:19.421Z,1478890039.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:19.580Z,1478890039.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:19.829Z,1478890039.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:20.230Z,1478890040.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:20.376Z,1478890040.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:20.633Z,1478890040.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:20.856Z,1478890040.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:21.045Z,1478890041.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:21.424Z,1478890041.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:21.652Z,1478890041.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:21.820Z,1478890041.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:22.229Z,1478890042.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:22.448Z,1478890042.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:22.644Z,1478890042.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:23.010Z,1478890043.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:23.220Z,1478890043.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:23.425Z,1478890043.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:23.824Z,1478890043.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:24.016Z,1478890044.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:24.224Z,1478890044.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:24.640Z,1478890044.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:24.813Z,1478890044.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:25.033Z,1478890045.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:25.224Z,1478890045.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:25.444Z,1478890045.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:25.836Z,1478890045.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:26.020Z,1478890046.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:26.238Z,1478890046.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:26.630Z,1478890046.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:26.752Z,1478890046.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:27.025Z,1478890047.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:27.437Z,1478890047.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:27.548Z,1478890047.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:27.873Z,1478890047.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:28.213Z,1478890048.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:28.345Z,1478890048.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:28.619Z,1478890048.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:28.760Z,1478890048.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:29.049Z,1478890049.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:29.417Z,1478890049.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:29.556Z,1478890049.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:29.842Z,1478890049.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:30.217Z,1478890050.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:30.353Z,1478890050.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:30.653Z,1478890050.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:30.768Z,1478890050.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:31.032Z,1478890051.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:31.445Z,1478890051.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:31.564Z,1478890051.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:31.850Z,1478890051.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:32.208Z,1478890052.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:32.360Z,1478890052.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:32.617Z,1478890052.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:32.768Z,1478890052.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:33.018Z,1478890053.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:33.407Z,1478890053.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:33.564Z,1478890053.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:33.811Z,1478890053.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:34.208Z,1478890054.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:34.360Z,1478890054.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:34.609Z,1478890054.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:34.848Z,1478890054.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:35.024Z,1478890055.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:35.408Z,1478890055.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:35.644Z,1478890055.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:35.845Z,1478890055.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:36.227Z,1478890056.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:36.440Z,1478890056.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:36.627Z,1478890056.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:37.011Z,1478890057.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:37.184Z,1478890057.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:37.409Z,1478890057.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:37.810Z,1478890057.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:37.980Z,1478890057.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:38.216Z,1478890058.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:38.622Z,1478890058.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:38.776Z,1478890058.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:39.013Z,1478890059.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:39.413Z,1478890059.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:39.572Z,1478890059.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:39.813Z,1478890059.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:40.220Z,1478890060.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:40.368Z,1478890060.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:40.610Z,1478890060.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:41.022Z,1478890061.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:41.164Z,1478890061.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:41.429Z,1478890061.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:41.824Z,1478890061.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:41.960Z,1478890061.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:42.257Z,1478890062.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:42.601Z,1478890062.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:42.756Z,1478890062.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:43.009Z,1478890063.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:43.406Z,1478890063.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:43.552Z,1478890063.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:43.819Z,1478890063.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:44.253Z,1478890064.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:44.348Z,1478890064.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:44.611Z,1478890064.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:45.034Z,1478890065.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:45.145Z,1478890065.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:45.409Z,1478890065.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:45.845Z,1478890065.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:45.940Z,1478890065.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:46.240Z,1478890066.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:46.348Z,1478890066.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:46.653Z,1478890066.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:46.756Z,1478890066.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:47.024Z,1478890067.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:47.164Z,1478890067.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:47.425Z,1478890067.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:47.572Z,1478890067.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:47.816Z,1478890067.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:47.980Z,1478890067.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:48.216Z,1478890068.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:48.618Z,1478890068.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:48.776Z,1478890068.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:49.016Z,1478890069.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:49.191Z,1478890069.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:49.416Z,1478890069.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:49.817Z,1478890069.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:49.988Z,1478890069.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:50.225Z,1478890070.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:50.601Z,1478890070.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:50.790Z,1478890070.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:51.034Z,1478890071.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:51.200Z,1478890071.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:51.426Z,1478890071.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:51.829Z,1478890071.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:51.996Z,1478890071.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:52.235Z,1478890072.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:52.627Z,1478890072.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:52.792Z,1478890072.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:53.018Z,1478890073.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:53.200Z,1478890073.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:53.409Z,1478890073.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:53.816Z,1478890073.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:53.996Z,1478890073.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:54.207Z,1478890074.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:54.621Z,1478890074.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:54.696Z,1478890074.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:55.017Z,1478890075.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:55.421Z,1478890075.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:55.492Z,1478890075.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:55.809Z,1478890075.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:56.209Z,1478890076.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:56.289Z,1478890076.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:56.630Z,1478890076.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:56.700Z,1478890076.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:57.061Z,1478890077.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:57.415Z,1478890077.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:57.497Z,1478890077.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:57.817Z,1478890077.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:58.213Z,1478890078.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:58.292Z,1478890078.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:58.637Z,1478890078.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:58.704Z,1478890078.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:59.013Z,1478890079.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:59.421Z,1478890079.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:47:59.500Z,1478890079.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:47:59.837Z,1478890079.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:00.227Z,1478890080.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:00.297Z,1478890080.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:00.650Z,1478890080.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:00.708Z,1478890080.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:01.038Z,1478890081.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:01.413Z,1478890081.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:01.504Z,1478890081.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:01.818Z,1478890081.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:02.219Z,1478890082.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:02.300Z,1478890082.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:02.623Z,1478890082.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:02.788Z,1478890082.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:03.021Z,1478890083.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:03.408Z,1478890083.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:03.608Z,1478890083.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:03.821Z,1478890083.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:04.213Z,1478890084.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:04.404Z,1478890084.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:04.612Z,1478890084.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:05.015Z,1478890085.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:05.140Z,1478890085.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:05.413Z,1478890085.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:05.809Z,1478890085.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:05.936Z,1478890085.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:06.213Z,1478890086.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:06.624Z,1478890086.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:06.733Z,1478890086.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:07.032Z,1478890087.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:07.144Z,1478890087.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:07.429Z,1478890087.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:07.826Z,1478890087.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:07.940Z,1478890087.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:08.245Z,1478890088.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:08.696Z,1478890088.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:09.492Z,1478890089.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:10.289Z,1478890090.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:10.700Z,1478890090.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:11.496Z,1478890091.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:11.636Z,1478890091.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:11.745Z,1478890091.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:12.153Z,1478890092.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:12.292Z,1478890092.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:12.528Z,1478890092.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:12.700Z,1478890092.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:12.956Z,1478890092.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:13.325Z,1478890093.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:13.496Z,1478890093.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:13.717Z,1478890093.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:14.136Z,1478890094.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:14.292Z,1478890094.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:14.505Z,1478890094.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:14.700Z,1478890094.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:14.942Z,1478890094.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:15.340Z,1478890095.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:15.496Z,1478890095.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:15.713Z,1478890095.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:16.108Z,1478890096.108 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:16.108Z,1478890096.108 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 259
2016-11-11T18:48:16.108Z,1478890096.109 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:48:16.115Z,1478890096.115 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:16.115Z,1478890096.115 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 259
2016-11-11T18:48:16.116Z,1478890096.115 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:48:16.117Z,1478890096.118 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:16.118Z,1478890096.118 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 259
2016-11-11T18:48:16.118Z,1478890096.118 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:48:16.153Z,1478890096.152 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:48:16.153Z,1478890096.153 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:48:16.153Z,1478890096.153 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:48:16.292Z,1478890096.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:16.558Z,1478890096.558 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:48:16.558Z,1478890096.559 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 259
2016-11-11T18:48:16.560Z,1478890096.560 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:48:16.560Z,1478890096.560 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 259
2016-11-11T18:48:16.560Z,1478890096.560 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:48:16.561Z,1478890096.560 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 259
2016-11-11T18:48:16.760Z,1478890096.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:16.928Z,1478890096.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:48:16.929Z,1478890096.929 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:48:16.929Z,1478890096.929 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:48:16.934Z,1478890096.934 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:48:16.935Z,1478890096.935 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:48:16.935Z,1478890096.935 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:48:16.936Z,1478890096.935 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:48:16.936Z,1478890096.936 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:48:16.936Z,1478890096.936 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:48:17.336Z,1478890097.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:17.556Z,1478890097.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:17.716Z,1478890097.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:18.115Z,1478890098.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:18.352Z,1478890098.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:18.516Z,1478890098.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:18.907Z,1478890098.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:19.120Z,1478890099.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:19.306Z,1478890099.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:19.708Z,1478890099.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:19.916Z,1478890099.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:20.121Z,1478890100.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:20.517Z,1478890100.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:20.713Z,1478890100.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:20.919Z,1478890100.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:21.124Z,1478890101.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:21.317Z,1478890101.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:21.717Z,1478890101.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:21.920Z,1478890101.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:22.117Z,1478890102.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:22.523Z,1478890102.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:22.652Z,1478890102.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:22.922Z,1478890102.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:23.329Z,1478890103.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:23.448Z,1478890103.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:23.722Z,1478890103.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:24.100Z,1478890104.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:24.259Z,1478890104.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:24.505Z,1478890104.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:24.680Z,1478890104.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:24.905Z,1478890104.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:25.303Z,1478890105.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:25.476Z,1478890105.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:25.707Z,1478890105.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:26.113Z,1478890106.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:26.273Z,1478890106.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:26.517Z,1478890106.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:26.684Z,1478890106.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:26.918Z,1478890106.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:27.315Z,1478890107.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:27.480Z,1478890107.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:27.798Z,1478890107.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:28.129Z,1478890108.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:28.276Z,1478890108.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:28.569Z,1478890108.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:28.684Z,1478890108.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:28.928Z,1478890108.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:29.330Z,1478890109.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:29.480Z,1478890109.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:29.737Z,1478890109.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:30.126Z,1478890110.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:30.276Z,1478890110.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:30.525Z,1478890110.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:30.744Z,1478890110.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:30.900Z,1478890110.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:31.329Z,1478890111.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:31.540Z,1478890111.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:31.719Z,1478890111.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:32.101Z,1478890112.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:32.336Z,1478890112.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:32.513Z,1478890112.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:32.917Z,1478890112.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:33.100Z,1478890113.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:33.317Z,1478890113.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:33.721Z,1478890113.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:33.896Z,1478890113.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:34.125Z,1478890114.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:34.510Z,1478890114.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:34.693Z,1478890114.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:34.921Z,1478890114.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:35.104Z,1478890115.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:35.320Z,1478890115.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:35.717Z,1478890115.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:35.900Z,1478890115.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:36.113Z,1478890116.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:36.517Z,1478890116.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:36.628Z,1478890116.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:36.913Z,1478890116.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:37.313Z,1478890117.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:37.424Z,1478890117.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:37.715Z,1478890117.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:38.132Z,1478890118.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:38.221Z,1478890118.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:38.540Z,1478890118.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:38.632Z,1478890118.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:38.953Z,1478890118.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:39.315Z,1478890119.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:39.429Z,1478890119.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:39.710Z,1478890119.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:40.113Z,1478890120.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:40.225Z,1478890120.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:40.537Z,1478890120.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:40.640Z,1478890120.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:40.913Z,1478890120.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:41.313Z,1478890121.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:41.436Z,1478890121.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:41.753Z,1478890121.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:42.117Z,1478890122.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:42.233Z,1478890122.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:42.505Z,1478890122.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:42.644Z,1478890122.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:42.938Z,1478890122.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:43.318Z,1478890123.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:43.440Z,1478890123.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:43.745Z,1478890123.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:44.149Z,1478890124.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:44.236Z,1478890124.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:44.523Z,1478890124.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:44.732Z,1478890124.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:44.908Z,1478890124.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:45.315Z,1478890125.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:45.528Z,1478890125.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:45.710Z,1478890125.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:46.117Z,1478890126.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:46.324Z,1478890126.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:46.517Z,1478890126.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:46.921Z,1478890126.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:47.076Z,1478890127.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:47.317Z,1478890127.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:47.713Z,1478890127.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:47.872Z,1478890127.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:48.121Z,1478890128.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:48.537Z,1478890128.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:48.669Z,1478890128.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:48.923Z,1478890128.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:49.092Z,1478890129.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:49.321Z,1478890129.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:49.725Z,1478890129.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:49.888Z,1478890129.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:50.108Z,1478890130.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:50.517Z,1478890130.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:50.620Z,1478890130.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:50.922Z,1478890130.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:51.320Z,1478890131.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:51.416Z,1478890131.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:51.720Z,1478890131.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:52.122Z,1478890132.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:52.212Z,1478890132.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:52.505Z,1478890132.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:52.624Z,1478890132.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:52.913Z,1478890132.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:53.309Z,1478890133.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:53.420Z,1478890133.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:53.720Z,1478890133.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:54.121Z,1478890134.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:54.219Z,1478890134.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:54.573Z,1478890134.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:54.636Z,1478890134.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:54.929Z,1478890134.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:55.318Z,1478890135.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:55.432Z,1478890135.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:55.722Z,1478890135.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:56.141Z,1478890136.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:56.228Z,1478890136.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:56.513Z,1478890136.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:56.636Z,1478890136.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:56.908Z,1478890136.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:57.340Z,1478890137.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:57.433Z,1478890137.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:57.715Z,1478890137.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:58.146Z,1478890138.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:58.228Z,1478890138.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:58.545Z,1478890138.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:58.716Z,1478890138.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:58.923Z,1478890138.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:59.321Z,1478890139.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:48:59.512Z,1478890139.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:48:59.722Z,1478890139.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:00.118Z,1478890140.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:00.308Z,1478890140.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:00.519Z,1478890140.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:00.916Z,1478890140.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:01.060Z,1478890141.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:01.317Z,1478890141.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:01.721Z,1478890141.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:01.856Z,1478890141.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:02.119Z,1478890142.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:02.520Z,1478890142.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:02.653Z,1478890142.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:02.924Z,1478890142.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:03.068Z,1478890143.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:03.306Z,1478890143.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:03.709Z,1478890143.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:03.864Z,1478890143.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:04.114Z,1478890144.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:04.529Z,1478890144.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:04.612Z,1478890144.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:04.932Z,1478890144.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:05.329Z,1478890145.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:05.408Z,1478890145.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:05.705Z,1478890145.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:06.109Z,1478890146.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:06.205Z,1478890146.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:06.520Z,1478890146.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:06.616Z,1478890146.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:06.916Z,1478890146.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:07.317Z,1478890147.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:07.412Z,1478890147.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:07.716Z,1478890147.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:08.116Z,1478890148.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:08.208Z,1478890148.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:08.518Z,1478890148.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:08.616Z,1478890148.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:09.412Z,1478890149.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:10.208Z,1478890150.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:10.616Z,1478890150.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:11.412Z,1478890151.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:12.021Z,1478890152.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:12.180Z,1478890152.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:12.208Z,1478890152.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:12.543Z,1478890152.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:12.684Z,1478890152.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:12.917Z,1478890152.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:13.344Z,1478890153.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:13.480Z,1478890153.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:13.743Z,1478890153.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:14.113Z,1478890154.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:14.276Z,1478890154.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:14.514Z,1478890154.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:14.925Z,1478890154.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:15.036Z,1478890155.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:15.317Z,1478890155.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:15.724Z,1478890155.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:15.832Z,1478890155.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:16.125Z,1478890156.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:16.525Z,1478890156.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:16.628Z,1478890156.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:16.925Z,1478890156.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:17.040Z,1478890157.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:17.315Z,1478890157.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:17.716Z,1478890157.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:17.836Z,1478890157.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:18.168Z,1478890158.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:18.524Z,1478890158.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:18.564Z,1478890158.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:18.916Z,1478890158.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:19.320Z,1478890159.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:19.360Z,1478890159.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:19.716Z,1478890159.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:20.119Z,1478890160.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:20.156Z,1478890160.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:20.541Z,1478890160.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:20.572Z,1478890160.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:20.930Z,1478890160.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:21.335Z,1478890161.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:21.368Z,1478890161.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:21.717Z,1478890161.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:22.165Z,1478890162.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:22.188Z,1478890162.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:22.517Z,1478890162.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:22.584Z,1478890162.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:22.925Z,1478890162.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:23.318Z,1478890163.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:23.380Z,1478890163.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:23.725Z,1478890163.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:24.177Z,1478890164.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:24.196Z,1478890164.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:24.529Z,1478890164.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:24.588Z,1478890164.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:24.949Z,1478890164.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:25.339Z,1478890165.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:25.384Z,1478890165.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:25.753Z,1478890165.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:26.116Z,1478890166.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:26.180Z,1478890166.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:26.566Z,1478890166.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:26.656Z,1478890166.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:26.920Z,1478890166.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:27.359Z,1478890167.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:27.452Z,1478890167.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:27.767Z,1478890167.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:28.124Z,1478890168.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:28.248Z,1478890168.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:28.525Z,1478890168.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:28.925Z,1478890168.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:29.016Z,1478890169.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:29.331Z,1478890169.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:29.733Z,1478890169.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:29.812Z,1478890169.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:30.130Z,1478890170.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:30.542Z,1478890170.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:30.608Z,1478890170.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:30.925Z,1478890170.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:31.024Z,1478890171.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:31.324Z,1478890171.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:31.724Z,1478890171.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:31.820Z,1478890171.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:32.187Z,1478890172.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:32.518Z,1478890172.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:32.576Z,1478890172.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:32.919Z,1478890172.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:33.317Z,1478890173.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:33.372Z,1478890173.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:33.724Z,1478890173.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:34.168Z,1478890174.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:34.197Z,1478890174.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:34.532Z,1478890174.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:34.576Z,1478890174.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:34.942Z,1478890174.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:35.343Z,1478890175.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:35.372Z,1478890175.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:35.741Z,1478890175.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:36.168Z,1478890176.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:36.187Z,1478890176.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:36.538Z,1478890176.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:36.576Z,1478890176.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:36.942Z,1478890176.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:37.313Z,1478890177.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:37.372Z,1478890177.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:37.721Z,1478890177.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:38.168Z,1478890178.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:38.178Z,1478890178.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:38.558Z,1478890178.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:38.576Z,1478890178.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:38.924Z,1478890178.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:39.327Z,1478890179.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:39.372Z,1478890179.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:39.738Z,1478890179.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:40.168Z,1478890180.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:40.189Z,1478890180.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:40.549Z,1478890180.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:40.652Z,1478890180.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:40.950Z,1478890180.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:41.323Z,1478890181.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:41.448Z,1478890181.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:41.753Z,1478890181.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:42.154Z,1478890182.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:42.244Z,1478890182.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:42.524Z,1478890182.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:42.933Z,1478890182.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:42.000Z,1478890183.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:43.330Z,1478890183.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:43.729Z,1478890183.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:43.796Z,1478890183.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:44.134Z,1478890184.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:44.508Z,1478890184.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:44.593Z,1478890184.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:44.947Z,1478890184.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:45.004Z,1478890185.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:45.349Z,1478890185.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:45.724Z,1478890185.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:45.800Z,1478890185.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:46.182Z,1478890186.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:46.532Z,1478890186.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:46.534Z,1478890186.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:46.913Z,1478890186.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:47.317Z,1478890187.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:47.328Z,1478890187.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:47.720Z,1478890187.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:48.124Z,1478890188.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:48.174Z,1478890188.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:48.552Z,1478890188.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:48.560Z,1478890188.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:48.917Z,1478890188.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:49.324Z,1478890189.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:49.356Z,1478890189.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:49.725Z,1478890189.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:50.152Z,1478890190.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:50.211Z,1478890190.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:50.537Z,1478890190.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:50.560Z,1478890190.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:50.941Z,1478890190.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:51.344Z,1478890191.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:51.356Z,1478890191.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:51.733Z,1478890191.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:52.152Z,1478890192.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:52.196Z,1478890192.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:52.557Z,1478890192.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:52.560Z,1478890192.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:52.928Z,1478890192.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:53.331Z,1478890193.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:53.356Z,1478890193.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:53.745Z,1478890193.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:54.112Z,1478890194.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:54.152Z,1478890194.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:54.553Z,1478890194.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:54.616Z,1478890194.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:54.943Z,1478890194.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:55.361Z,1478890195.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:55.412Z,1478890195.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:55.725Z,1478890195.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:56.157Z,1478890196.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:56.208Z,1478890196.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:56.594Z,1478890196.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:56.928Z,1478890196.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:56.980Z,1478890196.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:57.323Z,1478890197.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:57.719Z,1478890197.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:57.776Z,1478890197.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:58.141Z,1478890198.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:58.527Z,1478890198.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:58.572Z,1478890198.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:58.924Z,1478890198.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:58.988Z,1478890198.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:49:59.329Z,1478890199.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:59.733Z,1478890199.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:49:59.784Z,1478890199.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:00.170Z,1478890200.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:00.524Z,1478890200.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:00.541Z,1478890200.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:00.937Z,1478890200.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:01.320Z,1478890201.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:01.338Z,1478890201.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:01.737Z,1478890201.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:02.116Z,1478890202.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:02.146Z,1478890202.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:02.537Z,1478890202.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:02.560Z,1478890202.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:02.935Z,1478890202.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:03.316Z,1478890203.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:03.356Z,1478890203.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:03.715Z,1478890203.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:04.152Z,1478890204.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:04.160Z,1478890204.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:04.524Z,1478890204.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:04.560Z,1478890204.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:04.930Z,1478890204.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:05.322Z,1478890205.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:05.356Z,1478890205.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:05.737Z,1478890205.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:06.160Z,1478890206.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:06.179Z,1478890206.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:06.539Z,1478890206.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:06.568Z,1478890206.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:06.957Z,1478890206.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:07.332Z,1478890207.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:07.368Z,1478890207.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:07.737Z,1478890207.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:07.746Z,1478890207.746 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T18:45:07.4Z
2016-11-11T18:50:07.746Z,1478890207.746 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T18:50:07.746Z,1478890207.746 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T18:50:08.102Z,1478890208.102 [PNI_TCM](ERROR): CRC does not match. Expected:0x43424 got:0x1857
2016-11-11T18:50:08.165Z,1478890208.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:08.225Z,1478890208.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:08.600Z,1478890208.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:09.233Z,1478890209.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:09.396Z,1478890209.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:10.192Z,1478890210.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:10.964Z,1478890210.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:11.760Z,1478890211.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:12.416Z,1478890212.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:12.445Z,1478890212.445 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0324.lzma
2016-11-11T18:50:12.557Z,1478890212.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:12.599Z,1478890212.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:12.949Z,1478890212.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:12.984Z,1478890212.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:13.246Z,1478890213.246 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0324.lzma.bak
2016-11-11T18:50:13.246Z,1478890213.246 [DataOverHttps](INFO): SBD MOMSN=4555665
2016-11-11T18:50:13.365Z,1478890213.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:13.780Z,1478890213.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:14.484Z,1478890214.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:14.896Z,1478890214.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:15.026Z,1478890215.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:15.280Z,1478890215.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:16.078Z,1478890216.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:16.500Z,1478890216.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:17.296Z,1478890217.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:18.093Z,1478890218.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:18.405Z,1478890218.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:18.504Z,1478890218.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:18.537Z,1478890218.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:18.906Z,1478890218.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:19.291Z,1478890219.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:19.300Z,1478890219.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:19.687Z,1478890219.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:20.096Z,1478890220.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:20.151Z,1478890220.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:20.504Z,1478890220.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:21.300Z,1478890221.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:22.096Z,1478890222.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:22.572Z,1478890222.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:23.368Z,1478890223.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:23.452Z,1478890223.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:23.518Z,1478890223.519 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0325.lzma
2016-11-11T18:50:23.589Z,1478890223.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:23.997Z,1478890223.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:24.164Z,1478890224.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:24.310Z,1478890224.309 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0325.lzma.bak
2016-11-11T18:50:24.310Z,1478890224.310 [DataOverHttps](INFO): SBD MOMSN=4555667
2016-11-11T18:50:24.407Z,1478890224.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:24.928Z,1478890224.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:25.724Z,1478890225.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:25.849Z,1478890225.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:25.866Z,1478890225.866 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T18:50:25.866Z,1478890225.866 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T18:50:25.866Z,1478890225.866 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T18:50:25.965Z,1478890225.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:26.521Z,1478890226.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:26.932Z,1478890226.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:27.728Z,1478890227.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:28.472Z,1478890228.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:29.268Z,1478890229.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:29.486Z,1478890229.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:29.661Z,1478890229.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:30.065Z,1478890230.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:30.093Z,1478890230.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:30.428Z,1478890230.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:30.588Z,1478890230.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:30.795Z,1478890230.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:31.201Z,1478890231.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:31.384Z,1478890231.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:31.589Z,1478890231.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:32.018Z,1478890232.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:32.180Z,1478890232.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:32.381Z,1478890232.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:32.588Z,1478890232.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:32.787Z,1478890232.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:33.190Z,1478890233.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:33.384Z,1478890233.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:33.589Z,1478890233.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:33.987Z,1478890233.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:34.180Z,1478890234.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:34.409Z,1478890234.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:34.588Z,1478890234.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:34.809Z,1478890234.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:35.213Z,1478890235.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:35.384Z,1478890235.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:35.608Z,1478890235.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:36.001Z,1478890236.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:36.180Z,1478890236.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:36.381Z,1478890236.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:36.588Z,1478890236.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:36.780Z,1478890236.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:37.191Z,1478890237.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:37.384Z,1478890237.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:37.586Z,1478890237.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:37.997Z,1478890237.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:38.180Z,1478890238.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:38.394Z,1478890238.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:38.796Z,1478890238.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:38.896Z,1478890238.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:39.205Z,1478890239.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:39.601Z,1478890239.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:39.692Z,1478890239.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:39.996Z,1478890239.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:40.391Z,1478890240.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:40.489Z,1478890240.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:40.821Z,1478890240.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:40.900Z,1478890240.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:41.285Z,1478890241.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:41.621Z,1478890241.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:41.696Z,1478890241.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:42.062Z,1478890242.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:42.433Z,1478890242.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:42.452Z,1478890242.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:42.745Z,1478890242.745 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T18:50:42.791Z,1478890242.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:43.227Z,1478890243.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:43.248Z,1478890243.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:43.591Z,1478890243.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:44.038Z,1478890244.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:44.044Z,1478890244.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:44.441Z,1478890244.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:44.464Z,1478890244.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:44.831Z,1478890244.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:45.193Z,1478890245.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:45.260Z,1478890245.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:45.610Z,1478890245.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:46.046Z,1478890246.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:46.056Z,1478890246.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:46.376Z,1478890246.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:46.464Z,1478890246.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:46.817Z,1478890246.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:47.179Z,1478890247.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:47.260Z,1478890247.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:47.582Z,1478890247.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:48.046Z,1478890248.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:48.056Z,1478890248.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:48.344Z,1478890248.344 [NAL9602](INFO): Powering down
2016-11-11T18:50:48.415Z,1478890248.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:48.464Z,1478890248.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:48.785Z,1478890248.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:49.236Z,1478890249.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:49.260Z,1478890249.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:49.596Z,1478890249.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:49.988Z,1478890249.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:50.056Z,1478890250.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:50.395Z,1478890250.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:50.576Z,1478890250.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:50.796Z,1478890250.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:51.187Z,1478890251.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:51.372Z,1478890251.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:51.598Z,1478890251.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:52.012Z,1478890252.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:52.168Z,1478890252.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:52.401Z,1478890252.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:52.781Z,1478890252.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:52.876Z,1478890252.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:53.206Z,1478890253.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:53.595Z,1478890253.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:53.672Z,1478890253.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:54.001Z,1478890254.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:54.395Z,1478890254.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:54.469Z,1478890254.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:54.789Z,1478890254.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:54.884Z,1478890254.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:55.225Z,1478890255.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:55.591Z,1478890255.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:55.680Z,1478890255.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:56.041Z,1478890256.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:56.432Z,1478890256.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:56.448Z,1478890256.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:56.779Z,1478890256.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:57.180Z,1478890257.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:57.228Z,1478890257.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:57.635Z,1478890257.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:58.024Z,1478890258.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:58.124Z,1478890258.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:58.425Z,1478890258.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:58.436Z,1478890258.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:58.792Z,1478890258.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:59.229Z,1478890259.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:50:59.232Z,1478890259.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:50:59.594Z,1478890259.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:00.028Z,1478890260.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:00.058Z,1478890260.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:00.401Z,1478890260.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:00.436Z,1478890260.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:00.855Z,1478890260.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:01.210Z,1478890261.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:01.232Z,1478890261.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:01.639Z,1478890261.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:02.028Z,1478890262.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:02.056Z,1478890262.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:02.405Z,1478890262.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:02.436Z,1478890262.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:02.807Z,1478890262.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:03.208Z,1478890263.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:03.232Z,1478890263.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:03.617Z,1478890263.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:03.981Z,1478890263.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:04.028Z,1478890264.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:04.397Z,1478890264.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:04.496Z,1478890264.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:04.829Z,1478890264.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:05.193Z,1478890265.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:05.292Z,1478890265.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:05.604Z,1478890265.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:06.001Z,1478890266.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:06.088Z,1478890266.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:06.396Z,1478890266.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:06.788Z,1478890266.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:06.872Z,1478890266.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:07.195Z,1478890267.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:07.589Z,1478890267.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:07.668Z,1478890267.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:07.991Z,1478890267.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:08.396Z,1478890268.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:08.465Z,1478890268.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:08.805Z,1478890268.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:08.876Z,1478890268.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:09.194Z,1478890269.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:09.590Z,1478890269.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:09.672Z,1478890269.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:10.072Z,1478890270.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:10.401Z,1478890270.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:10.412Z,1478890270.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:10.825Z,1478890270.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:11.199Z,1478890271.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:11.208Z,1478890271.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:11.608Z,1478890271.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:12.005Z,1478890272.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:12.079Z,1478890272.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:12.405Z,1478890272.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:12.412Z,1478890272.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:12.810Z,1478890272.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:13.208Z,1478890273.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:13.210Z,1478890273.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:13.590Z,1478890273.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:14.004Z,1478890274.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:14.029Z,1478890274.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:14.420Z,1478890274.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:14.435Z,1478890274.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:14.816Z,1478890274.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:15.197Z,1478890275.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:15.216Z,1478890275.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:15.600Z,1478890275.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:16.012Z,1478890276.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:16.041Z,1478890276.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:16.410Z,1478890276.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:16.424Z,1478890276.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:16.788Z,1478890276.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:17.191Z,1478890277.191 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:17.191Z,1478890277.191 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 260
2016-11-11T18:51:17.191Z,1478890277.191 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:51:17.198Z,1478890277.198 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:17.198Z,1478890277.198 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 260
2016-11-11T18:51:17.198Z,1478890277.198 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:51:17.200Z,1478890277.200 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:17.200Z,1478890277.200 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 260
2016-11-11T18:51:17.200Z,1478890277.200 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:51:17.220Z,1478890277.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:17.254Z,1478890277.254 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:51:17.254Z,1478890277.254 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:51:17.255Z,1478890277.255 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:51:17.630Z,1478890277.630 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:51:17.631Z,1478890277.631 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 260
2016-11-11T18:51:17.636Z,1478890277.635 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:51:17.636Z,1478890277.636 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 260
2016-11-11T18:51:17.636Z,1478890277.636 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:51:17.636Z,1478890277.636 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 260
2016-11-11T18:51:18.008Z,1478890278.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:51:18.008Z,1478890278.008 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:51:18.009Z,1478890278.009 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:51:18.013Z,1478890278.013 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:51:18.014Z,1478890278.014 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:51:18.014Z,1478890278.014 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:51:18.014Z,1478890278.014 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:51:18.016Z,1478890278.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:18.016Z,1478890278.016 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:51:18.017Z,1478890278.017 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:51:18.441Z,1478890278.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:18.500Z,1478890278.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:18.785Z,1478890278.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:19.205Z,1478890279.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:19.296Z,1478890279.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:19.609Z,1478890279.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:20.033Z,1478890280.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:20.092Z,1478890280.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:20.471Z,1478890280.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:20.797Z,1478890280.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:20.844Z,1478890280.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:21.201Z,1478890281.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:21.598Z,1478890281.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:21.640Z,1478890281.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:21.998Z,1478890281.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:22.436Z,1478890282.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:22.456Z,1478890282.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:22.803Z,1478890282.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:22.848Z,1478890282.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:23.191Z,1478890283.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:23.597Z,1478890283.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:23.644Z,1478890283.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:24.049Z,1478890284.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:24.380Z,1478890284.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:24.392Z,1478890284.392 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T18:51:24.392Z,1478890284.392 [BPC1] Data Fault, FailCount= 1
2016-11-11T18:51:24.392Z,1478890284.392 [BPC1](ERROR): Data Fault
2016-11-11T18:51:24.405Z,1478890284.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:24.462Z,1478890284.462 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T18:51:24.782Z,1478890284.782 [PNI_TCM](ERROR): CRC does not match. Expected:0x15042 got:0x4388
2016-11-11T18:51:24.809Z,1478890284.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:25.176Z,1478890285.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:25.189Z,1478890285.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:25.591Z,1478890285.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:25.610Z,1478890285.611 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:51:25.611Z,1478890285.611 [BPC1] No Fault, FailCount= 1
2016-11-11T18:51:25.974Z,1478890285.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:26.113Z,1478890286.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:26.392Z,1478890286.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:26.425Z,1478890286.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:27.190Z,1478890287.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:27.986Z,1478890287.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:28.400Z,1478890288.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:29.196Z,1478890289.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:29.737Z,1478890289.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:29.881Z,1478890289.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:29.992Z,1478890289.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:30.242Z,1478890290.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:30.400Z,1478890290.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:30.641Z,1478890290.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:31.035Z,1478890291.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:31.196Z,1478890291.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:31.449Z,1478890291.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:31.846Z,1478890291.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:31.992Z,1478890291.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:32.241Z,1478890292.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:32.452Z,1478890292.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:32.642Z,1478890292.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:33.046Z,1478890293.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:33.248Z,1478890293.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:33.438Z,1478890293.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:33.849Z,1478890293.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:34.044Z,1478890294.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:34.245Z,1478890294.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:34.641Z,1478890294.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:34.824Z,1478890294.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:35.041Z,1478890295.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:35.445Z,1478890295.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:35.620Z,1478890295.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:35.850Z,1478890295.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:36.241Z,1478890296.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:36.417Z,1478890296.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:36.641Z,1478890296.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:36.828Z,1478890296.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:37.041Z,1478890297.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:37.442Z,1478890297.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:37.624Z,1478890297.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:37.839Z,1478890297.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:38.305Z,1478890298.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:38.352Z,1478890298.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:38.633Z,1478890298.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:39.060Z,1478890299.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:39.148Z,1478890299.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:39.441Z,1478890299.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:39.870Z,1478890299.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:39.945Z,1478890299.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:40.253Z,1478890300.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:40.356Z,1478890300.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:40.660Z,1478890300.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:41.047Z,1478890301.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:41.152Z,1478890301.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:41.449Z,1478890301.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:41.840Z,1478890301.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:41.949Z,1478890301.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:42.233Z,1478890302.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:42.360Z,1478890302.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:42.633Z,1478890302.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:43.036Z,1478890303.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:43.156Z,1478890303.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:43.441Z,1478890303.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:43.839Z,1478890303.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:43.952Z,1478890303.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:44.238Z,1478890304.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:44.360Z,1478890304.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:44.647Z,1478890304.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:45.044Z,1478890305.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:45.156Z,1478890305.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:45.444Z,1478890305.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:45.845Z,1478890305.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:45.952Z,1478890305.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:46.245Z,1478890306.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:46.420Z,1478890306.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:46.644Z,1478890306.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:47.047Z,1478890307.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:47.216Z,1478890307.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:47.448Z,1478890307.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:47.840Z,1478890307.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:48.012Z,1478890308.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:48.251Z,1478890308.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:48.649Z,1478890308.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:48.780Z,1478890308.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:49.033Z,1478890309.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:49.435Z,1478890309.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:49.576Z,1478890309.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:49.834Z,1478890309.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:50.234Z,1478890310.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:50.373Z,1478890310.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:50.640Z,1478890310.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:50.800Z,1478890310.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:51.042Z,1478890311.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:51.442Z,1478890311.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:51.596Z,1478890311.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:51.856Z,1478890311.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:52.308Z,1478890312.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:52.324Z,1478890312.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:52.662Z,1478890312.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:53.061Z,1478890313.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:53.104Z,1478890313.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:53.470Z,1478890313.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:53.841Z,1478890313.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:53.900Z,1478890313.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:54.261Z,1478890314.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:54.328Z,1478890314.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:54.669Z,1478890314.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:55.050Z,1478890315.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:55.124Z,1478890315.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:55.473Z,1478890315.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:55.921Z,1478890315.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:55.964Z,1478890315.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:56.258Z,1478890316.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:56.356Z,1478890316.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:56.666Z,1478890316.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:57.089Z,1478890317.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:57.152Z,1478890317.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:57.450Z,1478890317.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:57.901Z,1478890317.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:57.948Z,1478890317.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:58.243Z,1478890318.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:58.356Z,1478890318.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:58.646Z,1478890318.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:59.072Z,1478890319.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:59.152Z,1478890319.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:51:59.440Z,1478890319.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:59.835Z,1478890319.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:51:59.948Z,1478890319.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:00.254Z,1478890320.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:00.416Z,1478890320.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:00.660Z,1478890320.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:01.075Z,1478890321.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:01.212Z,1478890321.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:01.441Z,1478890321.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:01.858Z,1478890321.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:02.010Z,1478890322.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:02.236Z,1478890322.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:02.636Z,1478890322.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:02.756Z,1478890322.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:03.044Z,1478890323.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:03.466Z,1478890323.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:03.552Z,1478890323.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:03.849Z,1478890323.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:04.264Z,1478890324.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:04.349Z,1478890324.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:04.642Z,1478890324.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:04.760Z,1478890324.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:05.048Z,1478890325.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:05.450Z,1478890325.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:05.556Z,1478890325.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:05.912Z,1478890325.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:06.246Z,1478890326.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:06.284Z,1478890326.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:06.706Z,1478890326.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:07.080Z,1478890327.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:07.095Z,1478890327.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:07.449Z,1478890327.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:07.877Z,1478890327.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:07.948Z,1478890327.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:08.246Z,1478890328.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:08.320Z,1478890328.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:08.659Z,1478890328.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:09.074Z,1478890329.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:09.120Z,1478890329.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:09.438Z,1478890329.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:09.909Z,1478890329.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:09.920Z,1478890329.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:10.262Z,1478890330.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:10.328Z,1478890330.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:10.658Z,1478890330.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:11.041Z,1478890331.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:11.124Z,1478890331.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:11.446Z,1478890331.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:11.920Z,1478890331.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:11.935Z,1478890331.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:12.253Z,1478890332.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:12.328Z,1478890332.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:12.658Z,1478890332.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:13.051Z,1478890333.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:13.124Z,1478890333.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:13.469Z,1478890333.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:13.850Z,1478890333.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:13.920Z,1478890333.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:14.242Z,1478890334.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:14.380Z,1478890334.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:14.650Z,1478890334.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:15.065Z,1478890335.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:15.176Z,1478890335.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:15.469Z,1478890335.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:15.862Z,1478890335.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:15.972Z,1478890335.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:16.250Z,1478890336.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:16.630Z,1478890336.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:16.732Z,1478890336.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:17.066Z,1478890337.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:17.449Z,1478890337.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:17.528Z,1478890337.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:17.852Z,1478890337.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:18.256Z,1478890338.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:18.325Z,1478890338.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:18.657Z,1478890338.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:19.030Z,1478890339.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:19.120Z,1478890339.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:19.469Z,1478890339.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:19.877Z,1478890339.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:19.916Z,1478890339.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:20.266Z,1478890340.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:20.656Z,1478890340.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:20.712Z,1478890340.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:21.070Z,1478890341.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:21.502Z,1478890341.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:21.508Z,1478890341.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:21.895Z,1478890341.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:22.273Z,1478890342.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:22.304Z,1478890342.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:22.680Z,1478890342.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:23.048Z,1478890343.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:23.100Z,1478890343.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:23.462Z,1478890343.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:23.889Z,1478890343.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:23.896Z,1478890343.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:24.249Z,1478890344.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:24.649Z,1478890344.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:24.692Z,1478890344.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:25.037Z,1478890345.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:25.447Z,1478890345.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:25.488Z,1478890345.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:25.859Z,1478890345.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:26.247Z,1478890346.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:26.284Z,1478890346.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:26.648Z,1478890346.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:27.080Z,1478890347.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:27.877Z,1478890347.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:28.672Z,1478890348.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:29.468Z,1478890349.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:30.046Z,1478890350.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:30.173Z,1478890350.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:30.264Z,1478890350.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:30.525Z,1478890350.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:30.915Z,1478890350.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:31.060Z,1478890351.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:31.315Z,1478890351.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:31.725Z,1478890351.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:31.856Z,1478890351.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:32.117Z,1478890352.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:32.518Z,1478890352.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:32.652Z,1478890352.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:32.958Z,1478890352.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:33.320Z,1478890353.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:33.449Z,1478890353.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:33.726Z,1478890353.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:34.121Z,1478890354.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:34.245Z,1478890354.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:34.520Z,1478890354.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:34.917Z,1478890354.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:35.040Z,1478890355.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:35.325Z,1478890355.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:35.730Z,1478890355.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:35.836Z,1478890355.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:36.193Z,1478890356.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:36.512Z,1478890356.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:36.632Z,1478890356.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:36.951Z,1478890356.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:37.317Z,1478890357.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:37.428Z,1478890357.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:37.750Z,1478890357.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:38.151Z,1478890358.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:38.224Z,1478890358.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:38.528Z,1478890358.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:38.920Z,1478890358.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:39.020Z,1478890359.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:39.322Z,1478890359.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:39.724Z,1478890359.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:39.816Z,1478890359.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:40.117Z,1478890360.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:40.521Z,1478890360.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:40.612Z,1478890360.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:40.988Z,1478890360.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:41.324Z,1478890361.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:41.341Z,1478890361.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:41.725Z,1478890361.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:41.732Z,1478890361.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:42.133Z,1478890362.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:42.140Z,1478890362.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:42.534Z,1478890362.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:42.548Z,1478890362.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:42.936Z,1478890362.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:42.956Z,1478890362.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:43.329Z,1478890363.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:43.364Z,1478890363.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:43.725Z,1478890363.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:43.772Z,1478890363.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:44.121Z,1478890364.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:44.180Z,1478890364.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:44.516Z,1478890364.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:44.589Z,1478890364.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:44.921Z,1478890364.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:44.996Z,1478890364.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:45.328Z,1478890365.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:45.404Z,1478890365.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:45.728Z,1478890365.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:45.820Z,1478890365.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:46.127Z,1478890366.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:46.228Z,1478890366.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:46.528Z,1478890366.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:46.640Z,1478890366.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:46.920Z,1478890366.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:47.048Z,1478890367.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:47.333Z,1478890367.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:47.712Z,1478890367.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:47.844Z,1478890367.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:48.120Z,1478890368.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:48.252Z,1478890368.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:48.517Z,1478890368.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:48.921Z,1478890368.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:49.048Z,1478890369.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:49.329Z,1478890369.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:49.711Z,1478890369.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:49.844Z,1478890369.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:50.165Z,1478890370.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:50.252Z,1478890370.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:50.553Z,1478890370.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:50.914Z,1478890370.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:51.048Z,1478890371.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:51.350Z,1478890371.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:51.715Z,1478890371.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:51.844Z,1478890371.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:52.152Z,1478890372.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:52.252Z,1478890372.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:52.569Z,1478890372.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:52.916Z,1478890372.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:53.049Z,1478890373.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:53.325Z,1478890373.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:53.717Z,1478890373.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:53.844Z,1478890373.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:54.132Z,1478890374.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:54.252Z,1478890374.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:54.513Z,1478890374.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:54.908Z,1478890374.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:55.048Z,1478890375.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:55.321Z,1478890375.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:55.714Z,1478890375.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:55.844Z,1478890375.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:56.120Z,1478890376.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:56.320Z,1478890376.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:56.515Z,1478890376.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:56.921Z,1478890376.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:57.116Z,1478890377.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:57.321Z,1478890377.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:57.725Z,1478890377.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:57.912Z,1478890377.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:58.123Z,1478890378.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:58.522Z,1478890378.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:58.668Z,1478890378.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:58.925Z,1478890378.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:59.321Z,1478890379.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:52:59.464Z,1478890379.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:52:59.725Z,1478890379.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:00.118Z,1478890380.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:00.261Z,1478890380.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:00.527Z,1478890380.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:00.672Z,1478890380.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:00.928Z,1478890380.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:01.321Z,1478890381.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:01.468Z,1478890381.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:01.724Z,1478890381.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:02.113Z,1478890382.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:02.228Z,1478890382.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:02.512Z,1478890382.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:02.921Z,1478890382.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:03.024Z,1478890383.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:03.321Z,1478890383.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:03.717Z,1478890383.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:03.820Z,1478890383.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:04.124Z,1478890384.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:04.228Z,1478890384.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:04.573Z,1478890384.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:04.907Z,1478890384.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:05.024Z,1478890385.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:05.338Z,1478890385.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:05.712Z,1478890385.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:05.820Z,1478890385.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:06.139Z,1478890386.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:06.228Z,1478890386.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:06.521Z,1478890386.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:06.963Z,1478890386.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:07.024Z,1478890387.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:07.322Z,1478890387.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:07.725Z,1478890387.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:07.820Z,1478890387.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:08.129Z,1478890388.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:08.228Z,1478890388.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:08.525Z,1478890388.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:08.933Z,1478890388.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:09.024Z,1478890389.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:09.308Z,1478890389.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:09.717Z,1478890389.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:09.820Z,1478890389.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:10.121Z,1478890390.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:10.304Z,1478890390.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:10.521Z,1478890390.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:10.915Z,1478890390.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:11.100Z,1478890391.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:11.314Z,1478890391.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:11.715Z,1478890391.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:11.896Z,1478890391.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:12.119Z,1478890392.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:12.527Z,1478890392.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:12.644Z,1478890392.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:12.927Z,1478890392.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:13.325Z,1478890393.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:13.440Z,1478890393.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:13.724Z,1478890393.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:14.129Z,1478890394.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:14.236Z,1478890394.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:14.508Z,1478890394.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:14.652Z,1478890394.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:14.934Z,1478890394.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:15.318Z,1478890395.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:15.448Z,1478890395.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:15.718Z,1478890395.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:16.119Z,1478890396.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:16.180Z,1478890396.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:16.534Z,1478890396.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:16.921Z,1478890396.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:16.976Z,1478890396.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:17.320Z,1478890397.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:17.773Z,1478890397.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:17.797Z,1478890397.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:18.120Z,1478890398.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:18.184Z,1478890398.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:18.521Z,1478890398.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:18.967Z,1478890398.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:18.980Z,1478890398.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:19.308Z,1478890399.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:19.777Z,1478890399.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:19.824Z,1478890399.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:20.115Z,1478890400.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:20.220Z,1478890400.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:20.551Z,1478890400.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:20.949Z,1478890400.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:21.016Z,1478890401.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:21.315Z,1478890401.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:21.716Z,1478890401.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:21.812Z,1478890401.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:22.126Z,1478890402.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:22.220Z,1478890402.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:22.517Z,1478890402.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:22.918Z,1478890402.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:23.016Z,1478890403.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:23.327Z,1478890403.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:23.720Z,1478890403.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:23.814Z,1478890403.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:24.135Z,1478890404.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:24.288Z,1478890404.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:24.535Z,1478890404.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:24.938Z,1478890404.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:25.084Z,1478890405.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:25.332Z,1478890405.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:25.721Z,1478890405.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:25.880Z,1478890405.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:26.113Z,1478890406.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:26.515Z,1478890406.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:26.628Z,1478890406.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:26.924Z,1478890406.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:27.424Z,1478890407.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:28.221Z,1478890408.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:28.636Z,1478890408.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:29.432Z,1478890409.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:30.156Z,1478890410.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:30.492Z,1478890410.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:30.642Z,1478890410.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:30.952Z,1478890410.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:31.025Z,1478890411.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:31.434Z,1478890411.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:31.749Z,1478890411.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:31.854Z,1478890411.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:32.160Z,1478890412.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:32.237Z,1478890412.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:32.637Z,1478890412.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:32.956Z,1478890412.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:33.073Z,1478890413.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:33.443Z,1478890413.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:33.762Z,1478890413.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:33.858Z,1478890413.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:34.220Z,1478890414.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:34.222Z,1478890414.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:34.651Z,1478890414.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:35.016Z,1478890415.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:35.017Z,1478890415.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:35.453Z,1478890415.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:35.812Z,1478890415.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:35.826Z,1478890415.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:36.220Z,1478890416.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:36.226Z,1478890416.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:36.629Z,1478890416.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:37.016Z,1478890417.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:37.036Z,1478890417.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:37.433Z,1478890417.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:37.813Z,1478890417.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:37.903Z,1478890417.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:38.221Z,1478890418.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:38.260Z,1478890418.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:38.621Z,1478890418.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:39.023Z,1478890419.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:39.056Z,1478890419.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:39.429Z,1478890419.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:39.829Z,1478890419.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:39.852Z,1478890419.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:40.264Z,1478890420.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:40.604Z,1478890420.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:40.637Z,1478890420.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:41.032Z,1478890421.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:41.401Z,1478890421.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:41.433Z,1478890421.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:41.838Z,1478890421.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:42.196Z,1478890422.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:42.289Z,1478890422.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:42.608Z,1478890422.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:42.625Z,1478890422.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:43.025Z,1478890423.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:43.404Z,1478890423.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:43.421Z,1478890423.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:43.824Z,1478890423.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:44.132Z,1478890424.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:44.233Z,1478890424.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:44.622Z,1478890424.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:44.928Z,1478890424.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:45.022Z,1478890425.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:45.429Z,1478890425.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:45.725Z,1478890425.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:45.829Z,1478890425.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:46.136Z,1478890426.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:46.226Z,1478890426.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:46.633Z,1478890426.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:46.933Z,1478890426.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:47.049Z,1478890427.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:47.453Z,1478890427.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:47.729Z,1478890427.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:47.840Z,1478890427.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:48.140Z,1478890428.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:48.253Z,1478890428.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:48.636Z,1478890428.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:48.936Z,1478890428.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:49.046Z,1478890429.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:49.453Z,1478890429.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:49.733Z,1478890429.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:49.831Z,1478890429.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:50.144Z,1478890430.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:50.237Z,1478890430.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:50.636Z,1478890430.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:50.940Z,1478890430.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:51.036Z,1478890431.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:51.435Z,1478890431.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:51.736Z,1478890431.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:51.890Z,1478890431.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:52.237Z,1478890432.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:52.268Z,1478890432.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:52.621Z,1478890432.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:53.021Z,1478890433.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:53.064Z,1478890433.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:53.420Z,1478890433.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:53.829Z,1478890433.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:53.860Z,1478890433.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:54.252Z,1478890434.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:54.588Z,1478890434.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:54.632Z,1478890434.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:55.032Z,1478890435.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:55.384Z,1478890435.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:55.434Z,1478890435.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:55.833Z,1478890435.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:56.181Z,1478890436.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:56.261Z,1478890436.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:56.596Z,1478890436.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:56.624Z,1478890436.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:57.024Z,1478890437.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:57.392Z,1478890437.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:57.429Z,1478890437.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:57.862Z,1478890437.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:58.112Z,1478890438.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:58.228Z,1478890438.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:58.626Z,1478890438.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:58.908Z,1478890438.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:59.023Z,1478890439.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:59.427Z,1478890439.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:53:59.705Z,1478890439.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:53:59.824Z,1478890439.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:00.116Z,1478890440.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:00.223Z,1478890440.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:00.625Z,1478890440.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:00.912Z,1478890440.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:01.034Z,1478890441.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:01.489Z,1478890441.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:01.709Z,1478890441.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:01.841Z,1478890441.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:02.136Z,1478890442.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:02.241Z,1478890442.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:02.665Z,1478890442.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:02.932Z,1478890442.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:03.021Z,1478890443.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:03.446Z,1478890443.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:03.729Z,1478890443.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:03.862Z,1478890443.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:04.140Z,1478890444.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:04.226Z,1478890444.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:04.623Z,1478890444.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:04.936Z,1478890444.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:05.026Z,1478890445.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:05.423Z,1478890445.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:05.732Z,1478890445.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:05.880Z,1478890445.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:06.229Z,1478890446.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:06.244Z,1478890446.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:06.624Z,1478890446.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:07.029Z,1478890447.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:07.041Z,1478890447.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:07.434Z,1478890447.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:07.824Z,1478890447.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:07.836Z,1478890447.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:08.242Z,1478890448.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:08.560Z,1478890448.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:08.641Z,1478890448.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:09.041Z,1478890449.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:09.356Z,1478890449.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:09.421Z,1478890449.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:09.816Z,1478890449.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:10.153Z,1478890450.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:10.248Z,1478890450.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:10.564Z,1478890450.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:10.624Z,1478890450.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:11.027Z,1478890451.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:11.360Z,1478890451.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:11.429Z,1478890451.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:11.831Z,1478890451.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:12.088Z,1478890452.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:12.233Z,1478890452.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:12.626Z,1478890452.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:12.885Z,1478890452.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:13.037Z,1478890453.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:13.432Z,1478890453.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:13.681Z,1478890453.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:13.849Z,1478890453.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:14.096Z,1478890454.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:14.221Z,1478890454.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:14.616Z,1478890454.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:14.892Z,1478890454.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:15.024Z,1478890455.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:15.423Z,1478890455.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:15.689Z,1478890455.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:15.872Z,1478890455.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:16.108Z,1478890456.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:16.269Z,1478890456.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:16.629Z,1478890456.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:16.904Z,1478890456.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:17.029Z,1478890457.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:17.465Z,1478890457.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:17.703Z,1478890457.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:17.831Z,1478890457.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:18.112Z,1478890458.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:18.250Z,1478890458.250 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:18.250Z,1478890458.250 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 261
2016-11-11T18:54:18.250Z,1478890458.250 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:54:18.265Z,1478890458.265 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:18.265Z,1478890458.265 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 261
2016-11-11T18:54:18.265Z,1478890458.265 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:54:18.267Z,1478890458.267 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:18.267Z,1478890458.267 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 261
2016-11-11T18:54:18.267Z,1478890458.267 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:54:18.306Z,1478890458.306 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:54:18.306Z,1478890458.306 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:54:18.306Z,1478890458.306 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:54:18.665Z,1478890458.665 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:54:18.665Z,1478890458.665 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 261
2016-11-11T18:54:18.666Z,1478890458.666 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:54:18.666Z,1478890458.666 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 261
2016-11-11T18:54:18.667Z,1478890458.667 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:54:18.667Z,1478890458.667 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 261
2016-11-11T18:54:18.908Z,1478890458.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:19.020Z,1478890459.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:54:19.020Z,1478890459.020 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:54:19.021Z,1478890459.021 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:54:19.037Z,1478890459.037 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:54:19.038Z,1478890459.038 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:54:19.038Z,1478890459.038 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:54:19.039Z,1478890459.039 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:54:19.039Z,1478890459.039 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:54:19.040Z,1478890459.039 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:54:19.416Z,1478890459.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:19.704Z,1478890459.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:19.859Z,1478890459.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:20.228Z,1478890460.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:20.240Z,1478890460.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:20.634Z,1478890460.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:21.023Z,1478890461.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:21.036Z,1478890461.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:21.440Z,1478890461.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:21.832Z,1478890461.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:21.835Z,1478890461.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:22.230Z,1478890462.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:22.540Z,1478890462.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:22.626Z,1478890462.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:23.031Z,1478890463.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:23.336Z,1478890463.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:23.436Z,1478890463.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:23.835Z,1478890463.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:24.133Z,1478890464.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:24.235Z,1478890464.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:24.544Z,1478890464.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:24.641Z,1478890464.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:25.021Z,1478890465.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:25.340Z,1478890465.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:25.421Z,1478890465.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:25.821Z,1478890465.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:26.068Z,1478890466.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:26.224Z,1478890466.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:26.623Z,1478890466.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:26.864Z,1478890466.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:27.023Z,1478890467.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:27.661Z,1478890467.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:28.076Z,1478890468.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:28.872Z,1478890468.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:29.670Z,1478890469.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:30.152Z,1478890470.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:30.709Z,1478890470.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:30.835Z,1478890470.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:30.948Z,1478890470.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:31.197Z,1478890471.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:31.658Z,1478890471.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:31.744Z,1478890471.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:31.996Z,1478890471.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:32.152Z,1478890472.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:32.414Z,1478890472.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:32.814Z,1478890472.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:32.948Z,1478890472.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:33.209Z,1478890473.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:33.597Z,1478890473.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:33.745Z,1478890473.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:33.995Z,1478890473.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:34.168Z,1478890474.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:34.390Z,1478890474.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:34.794Z,1478890474.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:34.964Z,1478890474.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:35.198Z,1478890475.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:35.606Z,1478890475.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:35.760Z,1478890475.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:35.000Z,1478890476.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:36.400Z,1478890476.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:36.516Z,1478890476.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:36.792Z,1478890476.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:37.205Z,1478890477.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:37.312Z,1478890477.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:37.604Z,1478890477.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:37.992Z,1478890477.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:38.109Z,1478890478.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:38.411Z,1478890478.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:38.520Z,1478890478.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:38.812Z,1478890478.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:39.205Z,1478890479.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:39.316Z,1478890479.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:39.589Z,1478890479.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:39.993Z,1478890479.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:40.064Z,1478890480.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:40.402Z,1478890480.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:40.800Z,1478890480.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:40.860Z,1478890480.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:41.208Z,1478890481.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:41.584Z,1478890481.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:41.657Z,1478890481.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:41.996Z,1478890481.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:42.068Z,1478890482.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:42.400Z,1478890482.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:42.794Z,1478890482.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:42.864Z,1478890482.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:43.198Z,1478890483.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:43.597Z,1478890483.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:43.660Z,1478890483.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:44.002Z,1478890484.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:44.076Z,1478890484.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:44.405Z,1478890484.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:44.855Z,1478890484.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:44.872Z,1478890484.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:45.190Z,1478890485.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:45.588Z,1478890485.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:45.668Z,1478890485.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:46.022Z,1478890486.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:46.076Z,1478890486.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:46.391Z,1478890486.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:46.841Z,1478890486.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:46.872Z,1478890486.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:47.235Z,1478890487.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:47.591Z,1478890487.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:47.668Z,1478890487.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:48.006Z,1478890488.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:48.256Z,1478890488.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:48.402Z,1478890488.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:48.795Z,1478890488.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:49.052Z,1478890489.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:49.194Z,1478890489.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:49.604Z,1478890489.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:49.848Z,1478890489.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:50.005Z,1478890490.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:50.408Z,1478890490.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:50.504Z,1478890490.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:50.793Z,1478890490.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:51.187Z,1478890491.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:51.300Z,1478890491.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:51.598Z,1478890491.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:51.997Z,1478890491.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:52.097Z,1478890492.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:52.393Z,1478890492.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:52.508Z,1478890492.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:52.796Z,1478890492.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:53.197Z,1478890493.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:53.304Z,1478890493.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:53.661Z,1478890493.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:53.998Z,1478890493.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:54.060Z,1478890494.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:54.400Z,1478890494.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:54.801Z,1478890494.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:54.856Z,1478890494.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:55.197Z,1478890495.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:55.647Z,1478890495.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:55.652Z,1478890495.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:55.989Z,1478890495.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:56.060Z,1478890496.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:56.397Z,1478890496.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:56.801Z,1478890496.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:56.856Z,1478890496.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:57.192Z,1478890497.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:57.652Z,1478890497.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:57.660Z,1478890497.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:57.993Z,1478890497.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:58.060Z,1478890498.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:58.392Z,1478890498.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:58.791Z,1478890498.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:58.856Z,1478890498.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:59.229Z,1478890499.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:54:59.652Z,1478890499.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:54:59.711Z,1478890499.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:00.009Z,1478890500.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:00.060Z,1478890500.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:00.403Z,1478890500.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:00.822Z,1478890500.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:00.856Z,1478890500.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:01.200Z,1478890501.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:01.610Z,1478890501.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:01.652Z,1478890501.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:01.989Z,1478890501.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:02.124Z,1478890502.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:02.457Z,1478890502.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:02.790Z,1478890502.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:02.920Z,1478890502.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:03.191Z,1478890503.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:03.597Z,1478890503.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:03.716Z,1478890503.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:03.000Z,1478890504.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:04.410Z,1478890504.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:04.476Z,1478890504.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:04.810Z,1478890504.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:05.214Z,1478890505.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:05.272Z,1478890505.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:05.584Z,1478890505.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:05.991Z,1478890505.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:06.068Z,1478890506.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:06.404Z,1478890506.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:06.488Z,1478890506.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:06.800Z,1478890506.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:07.209Z,1478890507.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:07.284Z,1478890507.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:07.677Z,1478890507.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:08.021Z,1478890508.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:08.034Z,1478890508.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:08.397Z,1478890508.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:08.800Z,1478890508.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:08.830Z,1478890508.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:09.196Z,1478890509.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:09.630Z,1478890509.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:09.651Z,1478890509.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:10.005Z,1478890510.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:10.040Z,1478890510.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:10.389Z,1478890510.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:10.793Z,1478890510.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:10.836Z,1478890510.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:11.197Z,1478890511.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:11.632Z,1478890511.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:11.658Z,1478890511.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:12.013Z,1478890512.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:12.040Z,1478890512.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:12.394Z,1478890512.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:12.798Z,1478890512.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:12.836Z,1478890512.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:13.205Z,1478890513.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:13.632Z,1478890513.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:13.666Z,1478890513.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:14.001Z,1478890514.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:14.040Z,1478890514.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:14.465Z,1478890514.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:14.808Z,1478890514.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:14.836Z,1478890514.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:15.193Z,1478890515.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:15.627Z,1478890515.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:15.632Z,1478890515.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:15.996Z,1478890515.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:16.124Z,1478890516.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:16.432Z,1478890516.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:16.831Z,1478890516.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:16.920Z,1478890516.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:17.197Z,1478890517.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:17.609Z,1478890517.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:17.716Z,1478890517.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:18.003Z,1478890518.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:18.411Z,1478890518.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:18.476Z,1478890518.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:18.803Z,1478890518.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:19.190Z,1478890519.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:19.272Z,1478890519.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:19.594Z,1478890519.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:19.994Z,1478890519.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:20.068Z,1478890520.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:20.394Z,1478890520.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:20.480Z,1478890520.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:20.810Z,1478890520.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:21.201Z,1478890521.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:21.276Z,1478890521.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:21.644Z,1478890521.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:21.990Z,1478890521.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:22.020Z,1478890522.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:22.413Z,1478890522.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:22.797Z,1478890522.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:22.816Z,1478890522.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:23.205Z,1478890523.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:23.612Z,1478890523.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:23.689Z,1478890523.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:24.003Z,1478890524.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:24.060Z,1478890524.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:24.406Z,1478890524.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:24.802Z,1478890524.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:24.856Z,1478890524.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:25.177Z,1478890525.177 [PNI_TCM](ERROR): CRC does not match. Expected:0x61961 got:0x62237
2016-11-11T18:55:25.205Z,1478890525.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:25.629Z,1478890525.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:25.652Z,1478890525.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:26.006Z,1478890526.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:26.015Z,1478890526.015 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T18:55:26.015Z,1478890526.016 [Default:CheckIn:C.Wait] Stopped
2016-11-11T18:55:26.016Z,1478890526.016 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T18:55:26.016Z,1478890526.016 [Default:CheckIn:D] Running Loop=1
2016-11-11T18:55:26.060Z,1478890526.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:26.417Z,1478890526.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:26.438Z,1478890526.438 [Default:CheckIn:D] Stopped
2016-11-11T18:55:26.438Z,1478890526.438 [Default:CheckIn:E] Running Loop=1
2016-11-11T18:55:26.791Z,1478890526.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:26.812Z,1478890526.812 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 845.418815 min 
2016-11-11T18:55:26.812Z,1478890526.812 [Default:CheckIn:E] Stopped
2016-11-11T18:55:26.812Z,1478890526.812 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T18:55:26.812Z,1478890526.812 [Default:CheckIn] Stopped
2016-11-11T18:55:26.813Z,1478890526.813 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T18:55:26.813Z,1478890526.813 [Default:CheckIn](INFO): Running loop #82
2016-11-11T18:55:26.813Z,1478890526.813 [Default:CheckIn] Running Loop=82
2016-11-11T18:55:26.813Z,1478890526.813 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T18:55:26.813Z,1478890526.813 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T18:55:26.856Z,1478890526.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:27.217Z,1478890527.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:27.654Z,1478890527.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:28.064Z,1478890528.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:28.860Z,1478890528.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:29.657Z,1478890529.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:30.088Z,1478890530.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:30.602Z,1478890530.602 [NAL9602](INFO): Powering up
2016-11-11T18:55:30.686Z,1478890530.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:30.811Z,1478890530.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:30.884Z,1478890530.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:31.194Z,1478890531.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:31.589Z,1478890531.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:31.680Z,1478890531.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:31.976Z,1478890531.976 [BPC1](ERROR): Failed to receive battery data
2016-11-11T18:55:31.976Z,1478890531.976 [BPC1] Communications Fault, FailCount= 1
2016-11-11T18:55:31.976Z,1478890531.976 [BPC1](ERROR): Communications Fault
2016-11-11T18:55:31.988Z,1478890531.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:32.091Z,1478890532.091 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T18:55:32.383Z,1478890532.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:32.456Z,1478890532.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:32.775Z,1478890532.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:33.183Z,1478890533.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:33.228Z,1478890533.228 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:55:33.228Z,1478890533.228 [BPC1] No Fault, FailCount= 1
2016-11-11T18:55:33.252Z,1478890533.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:33.638Z,1478890533.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:34.042Z,1478890534.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:34.048Z,1478890534.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:34.389Z,1478890534.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:34.464Z,1478890534.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:34.785Z,1478890534.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:35.205Z,1478890535.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:35.260Z,1478890535.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:35.622Z,1478890535.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:35.975Z,1478890535.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:36.016Z,1478890536.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:36.376Z,1478890536.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:36.783Z,1478890536.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:36.812Z,1478890536.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:37.191Z,1478890537.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:37.608Z,1478890537.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:37.637Z,1478890537.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:37.970Z,1478890537.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:38.016Z,1478890538.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:38.401Z,1478890538.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:38.776Z,1478890538.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:38.812Z,1478890538.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:39.182Z,1478890539.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:39.597Z,1478890539.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:39.608Z,1478890539.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:39.997Z,1478890539.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:40.016Z,1478890540.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:40.390Z,1478890540.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:40.789Z,1478890540.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:40.812Z,1478890540.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:41.190Z,1478890541.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:41.538Z,1478890541.538 [NAL9602](INFO): NAL9602 initialized
2016-11-11T18:55:41.608Z,1478890541.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:41.618Z,1478890541.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:41.990Z,1478890541.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:42.016Z,1478890542.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:42.337Z,1478890542.337 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T18:55:42.337Z,1478890542.337 [NAL9602] Data Fault, FailCount= 4
2016-11-11T18:55:42.337Z,1478890542.337 [NAL9602](ERROR): Data Fault
2016-11-11T18:55:42.371Z,1478890542.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:42.441Z,1478890542.441 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T18:55:42.744Z,1478890542.744 [NAL9602](INFO): Powering down
2016-11-11T18:55:42.777Z,1478890542.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:42.812Z,1478890542.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:43.195Z,1478890543.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:43.574Z,1478890543.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:43.608Z,1478890543.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:43.673Z,1478890543.673 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T18:55:43.673Z,1478890543.673 [NAL9602] No Fault, FailCount= 4
2016-11-11T18:55:43.990Z,1478890543.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:44.072Z,1478890544.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:44.381Z,1478890544.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:44.798Z,1478890544.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:44.868Z,1478890544.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:45.179Z,1478890545.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:45.587Z,1478890545.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:45.664Z,1478890545.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:46.054Z,1478890546.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:46.416Z,1478890546.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:46.429Z,1478890546.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:46.785Z,1478890546.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:47.202Z,1478890547.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:47.220Z,1478890547.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:47.613Z,1478890547.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:47.937Z,1478890547.937 [NAL9602](INFO): Powering up NAL9602
2016-11-11T18:55:48.016Z,1478890548.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:48.043Z,1478890548.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:48.385Z,1478890548.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:48.432Z,1478890548.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:48.781Z,1478890548.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:49.185Z,1478890549.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:49.228Z,1478890549.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:49.627Z,1478890549.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:49.976Z,1478890549.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:49.989Z,1478890549.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:50.387Z,1478890550.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:50.772Z,1478890550.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:50.791Z,1478890550.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:51.183Z,1478890551.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:51.568Z,1478890551.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:51.621Z,1478890551.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:51.976Z,1478890551.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:51.992Z,1478890551.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:52.380Z,1478890552.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:52.770Z,1478890552.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:52.780Z,1478890552.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:53.181Z,1478890553.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:53.576Z,1478890553.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:53.632Z,1478890553.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:53.978Z,1478890553.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:53.984Z,1478890553.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:54.385Z,1478890554.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:54.778Z,1478890554.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:54.780Z,1478890554.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:55.185Z,1478890555.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:55.576Z,1478890555.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:55.618Z,1478890555.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:55.974Z,1478890555.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:55.984Z,1478890555.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:56.375Z,1478890556.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:56.774Z,1478890556.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:56.780Z,1478890556.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:57.185Z,1478890557.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:57.576Z,1478890557.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:57.588Z,1478890557.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:57.988Z,1478890557.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:58.064Z,1478890558.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:58.417Z,1478890558.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:58.737Z,1478890558.737 [NAL9602](INFO): NAL9602 initialized
2016-11-11T18:55:58.784Z,1478890558.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:58.860Z,1478890558.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:55:59.231Z,1478890559.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:59.596Z,1478890559.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:55:59.656Z,1478890559.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:00.066Z,1478890560.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:00.393Z,1478890560.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:00.432Z,1478890560.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:00.813Z,1478890560.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:01.205Z,1478890561.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:01.228Z,1478890561.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:01.598Z,1478890561.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:02.026Z,1478890562.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:02.053Z,1478890562.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:02.403Z,1478890562.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:02.444Z,1478890562.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:02.789Z,1478890562.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:03.181Z,1478890563.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:03.240Z,1478890563.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:03.597Z,1478890563.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:03.920Z,1478890563.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:03.982Z,1478890563.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:04.386Z,1478890564.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:04.716Z,1478890564.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:04.789Z,1478890564.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:05.184Z,1478890565.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:05.513Z,1478890565.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:05.620Z,1478890565.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:05.948Z,1478890565.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:05.984Z,1478890565.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:06.388Z,1478890566.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:06.744Z,1478890566.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:06.799Z,1478890566.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:07.190Z,1478890567.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:07.540Z,1478890567.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:07.621Z,1478890567.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:07.948Z,1478890567.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:08.003Z,1478890568.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:08.381Z,1478890568.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:08.744Z,1478890568.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:08.781Z,1478890568.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:09.185Z,1478890569.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:09.540Z,1478890569.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:09.596Z,1478890569.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:09.948Z,1478890569.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:09.998Z,1478890569.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:10.386Z,1478890570.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:10.744Z,1478890570.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:10.786Z,1478890570.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:11.189Z,1478890571.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:11.540Z,1478890571.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:11.702Z,1478890571.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:11.765Z,1478890571.765 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T18:56:11.990Z,1478890571.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:12.020Z,1478890572.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:12.393Z,1478890572.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:12.797Z,1478890572.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:12.816Z,1478890572.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:13.221Z,1478890573.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:13.581Z,1478890573.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:13.612Z,1478890573.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:14.053Z,1478890574.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:14.376Z,1478890574.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:14.394Z,1478890574.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:14.796Z,1478890574.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:15.180Z,1478890575.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:15.198Z,1478890575.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:15.605Z,1478890575.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:15.976Z,1478890575.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:16.021Z,1478890576.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:16.377Z,1478890576.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:16.772Z,1478890576.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:16.803Z,1478890576.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:17.180Z,1478890577.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:17.214Z,1478890577.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:17.590Z,1478890577.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:17.908Z,1478890577.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:17.984Z,1478890577.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:18.393Z,1478890578.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:18.706Z,1478890578.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:18.793Z,1478890578.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:19.178Z,1478890579.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:19.501Z,1478890579.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:19.586Z,1478890579.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:19.912Z,1478890579.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:19.990Z,1478890579.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:20.377Z,1478890580.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:20.708Z,1478890580.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:20.784Z,1478890580.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:21.175Z,1478890581.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:21.506Z,1478890581.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:21.582Z,1478890581.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:21.916Z,1478890581.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:21.977Z,1478890581.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:22.389Z,1478890582.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:22.712Z,1478890582.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:22.798Z,1478890582.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:23.202Z,1478890583.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:23.508Z,1478890583.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:23.587Z,1478890583.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:23.916Z,1478890583.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:23.996Z,1478890583.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:24.396Z,1478890584.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:24.712Z,1478890584.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:24.782Z,1478890584.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:25.183Z,1478890585.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:25.508Z,1478890585.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:25.663Z,1478890585.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:25.985Z,1478890585.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:26.012Z,1478890586.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:26.401Z,1478890586.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:26.775Z,1478890586.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:26.808Z,1478890586.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:27.177Z,1478890587.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:27.604Z,1478890587.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:27.617Z,1478890587.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:28.352Z,1478890588.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:29.148Z,1478890589.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:29.945Z,1478890589.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:30.356Z,1478890590.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:31.137Z,1478890591.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:31.152Z,1478890591.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:31.307Z,1478890591.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:31.665Z,1478890591.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:31.868Z,1478890591.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:32.055Z,1478890592.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:32.477Z,1478890592.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:32.664Z,1478890592.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:32.834Z,1478890592.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:33.268Z,1478890593.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:33.461Z,1478890593.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:33.673Z,1478890593.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:33.876Z,1478890593.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:34.045Z,1478890594.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:34.439Z,1478890594.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:34.672Z,1478890594.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:34.849Z,1478890594.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:35.241Z,1478890595.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:35.469Z,1478890595.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:35.653Z,1478890595.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:35.880Z,1478890595.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:36.049Z,1478890596.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:36.452Z,1478890596.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:36.676Z,1478890596.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:36.863Z,1478890596.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:37.249Z,1478890597.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:37.473Z,1478890597.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:37.652Z,1478890597.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:37.892Z,1478890597.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:38.051Z,1478890598.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:38.452Z,1478890598.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:38.688Z,1478890598.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:38.853Z,1478890598.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:39.255Z,1478890599.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:39.486Z,1478890599.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:39.654Z,1478890599.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:39.976Z,1478890599.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:40.055Z,1478890600.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:40.461Z,1478890600.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:40.772Z,1478890600.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:40.889Z,1478890600.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:41.279Z,1478890601.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:41.568Z,1478890601.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:41.659Z,1478890601.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:42.057Z,1478890602.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:42.320Z,1478890602.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:42.445Z,1478890602.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:42.861Z,1478890602.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:43.116Z,1478890603.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:43.244Z,1478890603.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:43.650Z,1478890603.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:43.913Z,1478890603.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:44.056Z,1478890604.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:44.348Z,1478890604.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:44.485Z,1478890604.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:44.881Z,1478890604.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:45.144Z,1478890605.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:45.237Z,1478890605.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:45.685Z,1478890605.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:45.848Z,1478890605.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:46.073Z,1478890606.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:46.509Z,1478890606.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:46.644Z,1478890606.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:46.885Z,1478890606.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:47.264Z,1478890607.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:47.441Z,1478890607.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:47.689Z,1478890607.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:47.852Z,1478890607.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:48.069Z,1478890608.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:48.453Z,1478890608.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:48.648Z,1478890608.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:48.848Z,1478890608.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:49.252Z,1478890609.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:49.446Z,1478890609.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:49.647Z,1478890609.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:49.864Z,1478890609.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:50.054Z,1478890610.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:50.434Z,1478890610.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:50.660Z,1478890610.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:50.842Z,1478890610.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:51.249Z,1478890611.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:51.458Z,1478890611.458 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:51.653Z,1478890611.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:51.868Z,1478890611.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:52.049Z,1478890612.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:52.482Z,1478890612.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:52.665Z,1478890612.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:52.886Z,1478890612.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:53.244Z,1478890613.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:53.461Z,1478890613.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:53.673Z,1478890613.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:53.948Z,1478890613.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:54.087Z,1478890614.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:54.477Z,1478890614.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:54.745Z,1478890614.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:54.854Z,1478890614.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:55.250Z,1478890615.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:55.540Z,1478890615.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:55.690Z,1478890615.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:56.066Z,1478890616.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:56.296Z,1478890616.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:56.476Z,1478890616.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:56.870Z,1478890616.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:57.092Z,1478890617.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:57.270Z,1478890617.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:57.724Z,1478890617.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:57.889Z,1478890617.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:58.073Z,1478890618.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:58.300Z,1478890618.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:58.470Z,1478890618.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:58.898Z,1478890618.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:59.097Z,1478890619.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:56:59.285Z,1478890619.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:59.657Z,1478890619.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:56:59.845Z,1478890619.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:00.090Z,1478890620.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:00.458Z,1478890620.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:00.640Z,1478890620.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:00.841Z,1478890620.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:01.294Z,1478890621.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:01.445Z,1478890621.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:01.673Z,1478890621.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:01.852Z,1478890621.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:02.095Z,1478890622.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:02.494Z,1478890622.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:02.648Z,1478890622.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:02.885Z,1478890622.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:03.265Z,1478890623.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:03.444Z,1478890623.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:03.628Z,1478890623.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:03.852Z,1478890623.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:04.078Z,1478890624.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:04.460Z,1478890624.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:04.648Z,1478890624.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:04.849Z,1478890624.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:05.268Z,1478890625.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:05.444Z,1478890625.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:05.637Z,1478890625.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:05.852Z,1478890625.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:06.036Z,1478890626.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:06.471Z,1478890626.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:06.648Z,1478890626.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:06.873Z,1478890626.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:07.270Z,1478890627.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:07.444Z,1478890627.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:07.670Z,1478890627.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:07.920Z,1478890627.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:08.074Z,1478890628.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:08.444Z,1478890628.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:08.717Z,1478890628.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:08.888Z,1478890628.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:09.253Z,1478890629.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:09.512Z,1478890629.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:09.662Z,1478890629.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:10.055Z,1478890630.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:10.312Z,1478890630.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:10.467Z,1478890630.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:10.858Z,1478890630.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:11.108Z,1478890631.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:11.248Z,1478890631.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:11.649Z,1478890631.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:11.904Z,1478890631.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:12.062Z,1478890632.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:12.312Z,1478890632.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:12.462Z,1478890632.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:12.897Z,1478890632.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:13.108Z,1478890633.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:13.268Z,1478890633.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:13.650Z,1478890633.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:13.816Z,1478890633.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:14.053Z,1478890634.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:14.486Z,1478890634.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:14.613Z,1478890634.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:14.901Z,1478890634.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:15.273Z,1478890635.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:15.409Z,1478890635.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:15.669Z,1478890635.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:15.821Z,1478890635.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:16.050Z,1478890636.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:16.475Z,1478890636.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:16.616Z,1478890636.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:16.874Z,1478890636.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:17.266Z,1478890637.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:17.413Z,1478890637.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:17.661Z,1478890637.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:17.824Z,1478890637.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:18.062Z,1478890638.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:18.458Z,1478890638.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:18.620Z,1478890638.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:18.857Z,1478890638.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:19.252Z,1478890639.252 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:19.252Z,1478890639.252 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 262
2016-11-11T18:57:19.252Z,1478890639.252 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T18:57:19.268Z,1478890639.268 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:19.268Z,1478890639.268 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 262
2016-11-11T18:57:19.268Z,1478890639.268 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T18:57:19.270Z,1478890639.270 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:19.270Z,1478890639.270 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 262
2016-11-11T18:57:19.270Z,1478890639.270 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T18:57:19.329Z,1478890639.329 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T18:57:19.330Z,1478890639.330 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T18:57:19.330Z,1478890639.330 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T18:57:19.416Z,1478890639.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:19.720Z,1478890639.720 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T18:57:19.720Z,1478890639.720 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 262
2016-11-11T18:57:19.721Z,1478890639.721 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T18:57:19.721Z,1478890639.721 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 262
2016-11-11T18:57:19.722Z,1478890639.722 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T18:57:19.722Z,1478890639.722 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 262
2016-11-11T18:57:19.824Z,1478890639.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:20.052Z,1478890640.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T18:57:20.052Z,1478890640.053 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:57:20.053Z,1478890640.053 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:57:20.058Z,1478890640.057 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T18:57:20.058Z,1478890640.058 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:57:20.058Z,1478890640.058 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:57:20.059Z,1478890640.059 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T18:57:20.059Z,1478890640.059 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T18:57:20.060Z,1478890640.060 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T18:57:20.440Z,1478890640.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:20.620Z,1478890640.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:20.850Z,1478890640.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:21.257Z,1478890641.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:21.416Z,1478890641.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:21.631Z,1478890641.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:21.897Z,1478890641.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:22.042Z,1478890642.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:22.479Z,1478890642.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:22.692Z,1478890642.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:22.856Z,1478890642.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:23.258Z,1478890643.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:23.490Z,1478890643.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:23.658Z,1478890643.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:24.068Z,1478890644.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:24.252Z,1478890644.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:24.447Z,1478890644.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:24.841Z,1478890644.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:25.048Z,1478890645.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:25.243Z,1478890645.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:25.641Z,1478890645.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:25.845Z,1478890645.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:26.038Z,1478890646.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:26.280Z,1478890646.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:26.449Z,1478890646.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:26.844Z,1478890646.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:27.076Z,1478890647.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:27.269Z,1478890647.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:27.657Z,1478890647.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:27.784Z,1478890647.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:28.580Z,1478890648.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:29.377Z,1478890649.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:29.788Z,1478890649.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:30.584Z,1478890650.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:31.234Z,1478890651.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:31.380Z,1478890651.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:31.405Z,1478890651.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:31.820Z,1478890651.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:31.822Z,1478890651.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:32.156Z,1478890652.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:32.585Z,1478890652.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:32.616Z,1478890652.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:32.989Z,1478890652.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:33.399Z,1478890653.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:33.412Z,1478890653.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:33.757Z,1478890653.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:33.820Z,1478890653.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:34.157Z,1478890654.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:34.560Z,1478890654.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:34.616Z,1478890654.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:34.957Z,1478890654.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:35.361Z,1478890655.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:35.412Z,1478890655.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:35.775Z,1478890655.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:36.170Z,1478890656.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:36.208Z,1478890656.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:36.571Z,1478890656.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:36.972Z,1478890656.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:37.004Z,1478890657.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:37.364Z,1478890657.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:37.760Z,1478890657.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:37.800Z,1478890657.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:38.156Z,1478890658.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:38.557Z,1478890658.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:38.596Z,1478890658.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:38.965Z,1478890658.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:39.360Z,1478890659.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:39.392Z,1478890659.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:39.761Z,1478890659.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:40.188Z,1478890660.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:40.205Z,1478890660.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:40.573Z,1478890660.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:40.977Z,1478890660.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:40.984Z,1478890660.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:41.389Z,1478890661.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:41.777Z,1478890661.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:41.780Z,1478890661.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:42.166Z,1478890662.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:42.559Z,1478890662.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:42.576Z,1478890662.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:42.957Z,1478890662.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:43.373Z,1478890663.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:43.374Z,1478890663.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:43.797Z,1478890663.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:44.160Z,1478890664.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:44.168Z,1478890664.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:44.598Z,1478890664.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:44.965Z,1478890664.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:44.985Z,1478890664.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:45.372Z,1478890665.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:45.760Z,1478890665.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:45.760Z,1478890665.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:46.213Z,1478890666.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:46.557Z,1478890666.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:46.572Z,1478890666.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:47.001Z,1478890667.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:47.353Z,1478890667.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:47.401Z,1478890667.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:47.770Z,1478890667.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:48.148Z,1478890668.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:48.162Z,1478890668.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:48.560Z,1478890668.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:48.945Z,1478890668.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:48.965Z,1478890668.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:49.374Z,1478890669.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:49.740Z,1478890669.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:49.770Z,1478890669.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:50.173Z,1478890670.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:50.537Z,1478890670.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:50.553Z,1478890670.553 [PNI_TCM](ERROR): CRC does not match. Expected:0x53427 got:0x59712
2016-11-11T18:57:50.577Z,1478890670.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:50.981Z,1478890670.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:51.333Z,1478890671.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:51.373Z,1478890671.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:51.772Z,1478890671.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:52.128Z,1478890672.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:52.175Z,1478890672.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:52.589Z,1478890672.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:52.924Z,1478890672.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:52.954Z,1478890672.954 [PNI_TCM](ERROR): CRC does not match. Expected:0x57764 got:0x46677
2016-11-11T18:57:53.001Z,1478890673.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:53.350Z,1478890673.349 [PNI_TCM](ERROR): CRC does not match. Expected:0x49106 got:0x13550
2016-11-11T18:57:53.377Z,1478890673.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:53.720Z,1478890673.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:53.757Z,1478890673.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:54.167Z,1478890674.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:54.516Z,1478890674.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:54.560Z,1478890674.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:54.983Z,1478890674.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:55.318Z,1478890675.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:55.369Z,1478890675.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:55.769Z,1478890675.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:56.125Z,1478890676.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:56.178Z,1478890676.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:56.556Z,1478890676.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:56.585Z,1478890676.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:56.964Z,1478890676.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:56.994Z,1478890676.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:57.372Z,1478890677.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:57.398Z,1478890677.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:57.780Z,1478890677.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:57.797Z,1478890677.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:58.169Z,1478890678.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:58.188Z,1478890678.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:58.559Z,1478890678.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:58.596Z,1478890678.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:58.973Z,1478890678.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:59.004Z,1478890679.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:59.412Z,1478890679.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:57:59.425Z,1478890679.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:59.769Z,1478890679.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:57:59.821Z,1478890679.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:00.185Z,1478890680.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:00.228Z,1478890680.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:00.565Z,1478890680.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:00.636Z,1478890680.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:00.993Z,1478890680.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:01.044Z,1478890681.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:01.410Z,1478890681.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:01.452Z,1478890681.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:01.777Z,1478890681.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:01.860Z,1478890681.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:02.189Z,1478890682.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:02.584Z,1478890682.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:02.658Z,1478890682.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:02.978Z,1478890682.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:03.380Z,1478890683.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:03.452Z,1478890683.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:03.774Z,1478890683.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:03.860Z,1478890683.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:04.166Z,1478890684.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:04.565Z,1478890684.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:04.656Z,1478890684.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:04.969Z,1478890684.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:05.363Z,1478890685.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:05.452Z,1478890685.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:05.835Z,1478890685.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:06.154Z,1478890686.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:06.196Z,1478890686.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:06.557Z,1478890686.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:06.987Z,1478890686.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:06.992Z,1478890686.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:07.385Z,1478890687.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:07.801Z,1478890687.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:07.830Z,1478890687.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:08.180Z,1478890688.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:08.216Z,1478890688.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:08.558Z,1478890688.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:08.970Z,1478890688.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:09.012Z,1478890689.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:09.405Z,1478890689.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:09.712Z,1478890689.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:09.763Z,1478890689.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:10.168Z,1478890690.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:10.508Z,1478890690.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:10.566Z,1478890690.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:10.969Z,1478890690.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:11.306Z,1478890691.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:11.382Z,1478890691.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:11.772Z,1478890691.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:11.779Z,1478890691.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:12.179Z,1478890692.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:12.568Z,1478890692.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:12.575Z,1478890692.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:12.985Z,1478890692.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:13.364Z,1478890693.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:13.393Z,1478890693.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:13.772Z,1478890693.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:13.801Z,1478890693.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:14.185Z,1478890694.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:14.557Z,1478890694.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:14.568Z,1478890694.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:14.961Z,1478890694.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:15.372Z,1478890695.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:15.401Z,1478890695.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:15.761Z,1478890695.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:15.780Z,1478890695.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:16.159Z,1478890696.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:16.550Z,1478890696.550 [BPC1](ERROR): Failed to receive battery data
2016-11-11T18:58:16.551Z,1478890696.551 [BPC1] Communications Fault, FailCount= 1
2016-11-11T18:58:16.551Z,1478890696.551 [BPC1](ERROR): Communications Fault
2016-11-11T18:58:16.567Z,1478890696.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:16.576Z,1478890696.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:16.629Z,1478890696.629 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T18:58:16.969Z,1478890696.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:17.373Z,1478890697.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:17.425Z,1478890697.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:17.777Z,1478890697.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:17.798Z,1478890697.797 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T18:58:17.798Z,1478890697.798 [BPC1] No Fault, FailCount= 1
2016-11-11T18:58:17.820Z,1478890697.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:18.237Z,1478890698.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:18.581Z,1478890698.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:18.616Z,1478890698.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:18.977Z,1478890698.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:19.362Z,1478890699.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:19.412Z,1478890699.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:19.798Z,1478890699.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:20.169Z,1478890700.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:20.208Z,1478890700.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:20.565Z,1478890700.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:20.971Z,1478890700.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:21.028Z,1478890701.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:21.366Z,1478890701.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:21.824Z,1478890701.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:21.851Z,1478890701.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:22.157Z,1478890702.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:22.232Z,1478890702.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:22.584Z,1478890702.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:22.985Z,1478890702.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:23.028Z,1478890703.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:23.389Z,1478890703.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:23.692Z,1478890703.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:23.784Z,1478890703.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:24.165Z,1478890704.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:24.488Z,1478890704.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:24.561Z,1478890704.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:24.969Z,1478890704.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:25.285Z,1478890705.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:25.374Z,1478890705.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:25.704Z,1478890705.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:25.769Z,1478890705.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:26.168Z,1478890706.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:26.500Z,1478890706.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:26.569Z,1478890706.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:26.970Z,1478890706.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:27.297Z,1478890707.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:27.384Z,1478890707.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:27.708Z,1478890707.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:27.780Z,1478890707.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:28.504Z,1478890708.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:29.301Z,1478890709.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:29.712Z,1478890709.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:30.508Z,1478890710.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:31.132Z,1478890711.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:31.281Z,1478890711.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:31.304Z,1478890711.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:31.652Z,1478890711.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:31.792Z,1478890711.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:32.057Z,1478890712.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:32.440Z,1478890712.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:32.588Z,1478890712.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:32.841Z,1478890712.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:33.256Z,1478890713.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:33.384Z,1478890713.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:33.645Z,1478890713.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:34.054Z,1478890714.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:34.148Z,1478890714.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:34.457Z,1478890714.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:34.837Z,1478890714.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:34.945Z,1478890714.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:35.277Z,1478890715.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:35.669Z,1478890715.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:35.741Z,1478890715.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:36.041Z,1478890716.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:36.152Z,1478890716.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:36.446Z,1478890716.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:36.842Z,1478890716.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:36.948Z,1478890716.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:37.286Z,1478890717.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:37.637Z,1478890717.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:37.680Z,1478890717.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:38.029Z,1478890718.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:38.431Z,1478890718.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:38.476Z,1478890718.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:38.833Z,1478890718.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:39.273Z,1478890719.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:39.317Z,1478890719.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:39.633Z,1478890719.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:39.688Z,1478890719.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:40.032Z,1478890720.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:40.428Z,1478890720.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:40.484Z,1478890720.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:40.845Z,1478890720.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:41.280Z,1478890721.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:41.306Z,1478890721.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:41.672Z,1478890721.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:41.692Z,1478890721.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:42.041Z,1478890722.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:42.434Z,1478890722.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:42.488Z,1478890722.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:42.845Z,1478890722.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:43.278Z,1478890723.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:43.285Z,1478890723.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:43.645Z,1478890723.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:43.696Z,1478890723.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:44.021Z,1478890724.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:44.425Z,1478890724.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:44.492Z,1478890724.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:44.833Z,1478890724.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:45.228Z,1478890725.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:45.288Z,1478890725.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:45.637Z,1478890725.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:45.764Z,1478890725.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:46.041Z,1478890726.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:46.473Z,1478890726.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:46.560Z,1478890726.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:46.849Z,1478890726.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:47.242Z,1478890727.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:47.356Z,1478890727.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:47.701Z,1478890727.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:48.053Z,1478890728.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:48.140Z,1478890728.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:48.471Z,1478890728.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:48.823Z,1478890728.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:48.936Z,1478890728.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:49.261Z,1478890729.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:49.668Z,1478890729.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:49.733Z,1478890729.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:50.033Z,1478890730.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:50.144Z,1478890730.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:50.433Z,1478890730.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:50.837Z,1478890730.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:50.940Z,1478890730.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:51.287Z,1478890731.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:51.662Z,1478890731.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:51.704Z,1478890731.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:52.057Z,1478890732.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:52.457Z,1478890732.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:52.500Z,1478890732.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:52.828Z,1478890732.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:53.294Z,1478890733.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:53.296Z,1478890733.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:53.637Z,1478890733.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:53.704Z,1478890733.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:54.037Z,1478890734.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:54.449Z,1478890734.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:54.500Z,1478890734.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:54.845Z,1478890734.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:55.265Z,1478890735.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:55.296Z,1478890735.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:55.649Z,1478890735.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:55.704Z,1478890735.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:56.030Z,1478890736.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:56.439Z,1478890736.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:56.500Z,1478890736.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:56.836Z,1478890736.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:57.287Z,1478890737.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:57.296Z,1478890737.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:57.660Z,1478890737.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:57.704Z,1478890737.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:58.045Z,1478890738.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:58.427Z,1478890738.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:58.500Z,1478890738.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:58.829Z,1478890738.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:59.235Z,1478890739.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:59.296Z,1478890739.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:58:59.640Z,1478890739.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:58:59.744Z,1478890739.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:00.029Z,1478890740.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:00.481Z,1478890740.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:00.540Z,1478890740.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:00.841Z,1478890740.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:01.245Z,1478890741.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:01.336Z,1478890741.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:01.726Z,1478890741.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:02.046Z,1478890742.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:02.100Z,1478890742.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:02.481Z,1478890742.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:02.859Z,1478890742.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:02.896Z,1478890742.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:03.253Z,1478890743.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:03.643Z,1478890743.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:03.692Z,1478890743.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:04.069Z,1478890744.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:04.120Z,1478890744.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:04.450Z,1478890744.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:04.826Z,1478890744.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:04.916Z,1478890744.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:05.294Z,1478890745.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:05.649Z,1478890745.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:05.651Z,1478890745.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:06.042Z,1478890746.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:06.444Z,1478890746.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:06.454Z,1478890746.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:06.858Z,1478890746.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:07.241Z,1478890747.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:07.305Z,1478890747.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:07.652Z,1478890747.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:07.669Z,1478890747.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:08.046Z,1478890748.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:08.441Z,1478890748.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:08.448Z,1478890748.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:08.834Z,1478890748.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:09.245Z,1478890749.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:09.315Z,1478890749.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:09.636Z,1478890749.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:09.656Z,1478890749.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:10.036Z,1478890750.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:10.434Z,1478890750.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:10.452Z,1478890750.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:10.841Z,1478890750.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:11.248Z,1478890751.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:11.308Z,1478890751.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:11.645Z,1478890751.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:11.664Z,1478890751.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:12.037Z,1478890752.037 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T18:59:12.062Z,1478890752.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:12.460Z,1478890752.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:12.463Z,1478890752.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:12.834Z,1478890752.834 [PNI_TCM](ERROR): CRC does not match. Expected:0x44465 got:0x48696
2016-11-11T18:59:12.854Z,1478890752.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:13.244Z,1478890753.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:13.256Z,1478890753.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:13.658Z,1478890753.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:13.736Z,1478890753.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:14.055Z,1478890754.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:14.439Z,1478890754.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:14.532Z,1478890754.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:14.866Z,1478890754.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:15.238Z,1478890755.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:15.328Z,1478890755.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:15.691Z,1478890755.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:16.066Z,1478890756.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:16.088Z,1478890756.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:16.434Z,1478890756.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:16.840Z,1478890756.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:16.884Z,1478890756.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:17.281Z,1478890757.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:17.680Z,1478890757.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:17.704Z,1478890757.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:18.069Z,1478890758.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:18.092Z,1478890758.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:18.481Z,1478890758.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:18.846Z,1478890758.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:18.888Z,1478890758.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:19.284Z,1478890759.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:19.624Z,1478890759.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:19.636Z,1478890759.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:20.034Z,1478890760.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:20.421Z,1478890760.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:20.435Z,1478890760.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:20.836Z,1478890760.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:21.217Z,1478890761.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:21.266Z,1478890761.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:21.640Z,1478890761.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:21.648Z,1478890761.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:22.045Z,1478890762.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:22.437Z,1478890762.437 [PNI_TCM](ERROR): CRC does not match. Expected:0x43415 got:0x7569
2016-11-11T18:59:22.444Z,1478890762.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:22.454Z,1478890762.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:22.842Z,1478890762.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:23.240Z,1478890763.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:23.299Z,1478890763.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:23.648Z,1478890763.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:23.669Z,1478890763.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:24.025Z,1478890764.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:24.435Z,1478890764.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:24.444Z,1478890764.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:24.832Z,1478890764.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:25.240Z,1478890765.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:25.290Z,1478890765.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:25.642Z,1478890765.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:25.652Z,1478890765.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:26.041Z,1478890766.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:26.432Z,1478890766.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:26.448Z,1478890766.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:26.837Z,1478890766.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:27.235Z,1478890767.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:27.244Z,1478890767.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:27.644Z,1478890767.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:27.721Z,1478890767.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:28.045Z,1478890768.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:28.516Z,1478890768.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:29.312Z,1478890769.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:30.064Z,1478890770.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:30.860Z,1478890770.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:31.486Z,1478890771.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:31.654Z,1478890771.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:31.656Z,1478890771.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:32.007Z,1478890772.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:32.068Z,1478890772.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:32.409Z,1478890772.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:32.810Z,1478890772.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:32.864Z,1478890772.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:33.270Z,1478890773.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:33.592Z,1478890773.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:33.641Z,1478890773.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:34.009Z,1478890774.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:34.388Z,1478890774.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:34.403Z,1478890774.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:34.800Z,1478890774.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:35.185Z,1478890775.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:35.270Z,1478890775.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:35.600Z,1478890775.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:35.607Z,1478890775.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:35.984Z,1478890775.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:36.396Z,1478890776.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:36.413Z,1478890776.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:36.793Z,1478890776.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:37.193Z,1478890777.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:37.252Z,1478890777.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:37.595Z,1478890777.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:37.604Z,1478890777.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:38.017Z,1478890778.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:38.400Z,1478890778.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:38.406Z,1478890778.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:38.810Z,1478890778.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:39.197Z,1478890779.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:39.284Z,1478890779.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:39.608Z,1478890779.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:39.611Z,1478890779.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:39.988Z,1478890779.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:40.384Z,1478890780.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:40.404Z,1478890780.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:40.793Z,1478890780.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:41.200Z,1478890781.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:41.203Z,1478890781.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:41.595Z,1478890781.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:41.688Z,1478890781.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:41.991Z,1478890781.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:42.387Z,1478890782.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:42.484Z,1478890782.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:42.825Z,1478890782.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:43.192Z,1478890783.192 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2016-11-11T18:59:43.228Z,1478890783.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:43.280Z,1478890783.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:43.638Z,1478890783.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:44.006Z,1478890784.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:44.052Z,1478890784.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:44.456Z,1478890784.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:44.815Z,1478890784.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:44.848Z,1478890784.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:45.181Z,1478890785.181 [PNI_TCM](ERROR): CRC does not match. Expected:0x26156 got:0x17082
2016-11-11T18:59:45.221Z,1478890785.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:45.644Z,1478890785.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:45.670Z,1478890785.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:45.993Z,1478890785.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:46.076Z,1478890786.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:46.404Z,1478890786.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:46.810Z,1478890786.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:46.872Z,1478890786.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:47.238Z,1478890787.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:47.608Z,1478890787.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:47.629Z,1478890787.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:48.015Z,1478890788.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:48.394Z,1478890788.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:48.404Z,1478890788.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:48.791Z,1478890788.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:49.200Z,1478890789.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:49.215Z,1478890789.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:49.598Z,1478890789.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:49.612Z,1478890789.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:49.996Z,1478890789.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:50.397Z,1478890790.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:50.408Z,1478890790.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:50.796Z,1478890790.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:51.204Z,1478890791.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:51.242Z,1478890791.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:51.597Z,1478890791.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:51.612Z,1478890791.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:51.986Z,1478890791.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:52.397Z,1478890792.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:52.408Z,1478890792.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:52.771Z,1478890792.771 [PNI_TCM](ERROR): CRC does not match. Expected:0x8688 got:0x17433
2016-11-11T18:59:52.802Z,1478890792.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:53.204Z,1478890793.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:53.222Z,1478890793.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:53.609Z,1478890793.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:53.612Z,1478890793.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:54.009Z,1478890794.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:54.399Z,1478890794.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:54.408Z,1478890794.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:54.807Z,1478890794.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:55.204Z,1478890795.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:55.212Z,1478890795.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:55.605Z,1478890795.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:55.668Z,1478890795.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:56.005Z,1478890796.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:56.387Z,1478890796.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:56.464Z,1478890796.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:56.792Z,1478890796.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:57.193Z,1478890797.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:57.260Z,1478890797.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:57.650Z,1478890797.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:57.978Z,1478890797.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:58.033Z,1478890798.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:58.401Z,1478890798.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:58.828Z,1478890798.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:58.830Z,1478890798.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:59.222Z,1478890799.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T18:59:59.625Z,1478890799.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T18:59:59.672Z,1478890799.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:00.037Z,1478890800.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:00.040Z,1478890800.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:00.387Z,1478890800.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:00.813Z,1478890800.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:00.836Z,1478890800.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:01.237Z,1478890801.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:01.572Z,1478890801.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:01.611Z,1478890801.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:02.021Z,1478890802.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:02.368Z,1478890802.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:02.401Z,1478890802.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:02.785Z,1478890802.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:03.164Z,1478890803.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:03.216Z,1478890803.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:03.572Z,1478890803.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:03.597Z,1478890803.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:04.007Z,1478890804.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:04.368Z,1478890804.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:04.407Z,1478890804.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:04.801Z,1478890804.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:05.168Z,1478890805.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:05.220Z,1478890805.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:05.590Z,1478890805.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:05.608Z,1478890805.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:06.001Z,1478890806.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:06.401Z,1478890806.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:06.404Z,1478890806.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:06.789Z,1478890806.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:07.200Z,1478890807.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:07.231Z,1478890807.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:07.598Z,1478890807.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:07.608Z,1478890807.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:07.985Z,1478890807.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:08.399Z,1478890808.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:08.404Z,1478890808.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:08.788Z,1478890808.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:09.227Z,1478890809.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:09.282Z,1478890809.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:09.602Z,1478890809.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:09.660Z,1478890809.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:10.010Z,1478890810.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:10.401Z,1478890810.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:10.456Z,1478890810.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:10.803Z,1478890810.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:11.198Z,1478890811.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:11.252Z,1478890811.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:11.666Z,1478890811.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:11.992Z,1478890811.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:11.998Z,1478890811.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:12.389Z,1478890812.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:12.783Z,1478890812.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:12.788Z,1478890812.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:13.199Z,1478890813.199 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T19:00:13.199Z,1478890813.199 [BPC1] Data Fault, FailCount= 1
2016-11-11T19:00:13.199Z,1478890813.200 [BPC1](ERROR): Data Fault
2016-11-11T19:00:13.221Z,1478890813.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:13.262Z,1478890813.262 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T19:00:13.585Z,1478890813.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:13.650Z,1478890813.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:13.986Z,1478890813.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:13.996Z,1478890813.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:14.405Z,1478890814.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:14.461Z,1478890814.461 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:00:14.461Z,1478890814.461 [BPC1] No Fault, FailCount= 1
2016-11-11T19:00:14.792Z,1478890814.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:14.853Z,1478890814.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:15.222Z,1478890815.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:15.552Z,1478890815.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:15.637Z,1478890815.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:15.990Z,1478890815.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:16.348Z,1478890816.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:16.401Z,1478890816.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:16.789Z,1478890816.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:17.144Z,1478890817.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:17.232Z,1478890817.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:17.552Z,1478890817.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:17.581Z,1478890817.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:17.985Z,1478890817.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:18.348Z,1478890818.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:18.385Z,1478890818.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:18.791Z,1478890818.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:19.144Z,1478890819.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:19.222Z,1478890819.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:19.556Z,1478890819.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:19.595Z,1478890819.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:19.992Z,1478890819.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:20.352Z,1478890820.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:20.400Z,1478890820.400 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:20.400Z,1478890820.400 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 263
2016-11-11T19:00:20.400Z,1478890820.400 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:00:20.407Z,1478890820.407 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:20.407Z,1478890820.407 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 263
2016-11-11T19:00:20.407Z,1478890820.407 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:00:20.409Z,1478890820.409 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:20.409Z,1478890820.409 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 263
2016-11-11T19:00:20.409Z,1478890820.409 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:00:20.444Z,1478890820.444 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:00:20.445Z,1478890820.445 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:00:20.445Z,1478890820.445 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:00:20.846Z,1478890820.846 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:00:20.846Z,1478890820.846 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 263
2016-11-11T19:00:20.847Z,1478890820.847 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:00:20.847Z,1478890820.847 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 263
2016-11-11T19:00:20.852Z,1478890820.852 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:00:20.852Z,1478890820.852 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 263
2016-11-11T19:00:21.148Z,1478890821.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:21.209Z,1478890821.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:00:21.209Z,1478890821.209 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:00:21.210Z,1478890821.210 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:00:21.219Z,1478890821.219 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:00:21.223Z,1478890821.223 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:00:21.224Z,1478890821.224 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:00:21.224Z,1478890821.224 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:00:21.225Z,1478890821.225 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:00:21.225Z,1478890821.225 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:00:21.556Z,1478890821.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:21.581Z,1478890821.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:21.985Z,1478890821.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:22.352Z,1478890822.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:22.389Z,1478890822.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:22.786Z,1478890822.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:23.150Z,1478890823.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:23.254Z,1478890823.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:23.600Z,1478890823.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:23.632Z,1478890823.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:24.001Z,1478890824.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:24.380Z,1478890824.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:24.428Z,1478890824.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:24.808Z,1478890824.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:25.209Z,1478890825.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:25.224Z,1478890825.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:25.635Z,1478890825.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:25.992Z,1478890825.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:26.012Z,1478890826.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:26.402Z,1478890826.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:26.794Z,1478890826.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:26.808Z,1478890826.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:27.192Z,1478890827.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:27.202Z,1478890827.202 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T18:55:26.8Z
2016-11-11T19:00:27.202Z,1478890827.202 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T19:00:27.202Z,1478890827.202 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T19:00:27.604Z,1478890827.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:27.665Z,1478890827.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:28.012Z,1478890828.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:28.617Z,1478890828.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:28.759Z,1478890828.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:28.808Z,1478890828.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:29.528Z,1478890829.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:30.324Z,1478890830.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:31.120Z,1478890831.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:31.532Z,1478890831.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:32.264Z,1478890832.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:32.328Z,1478890832.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:32.384Z,1478890832.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:32.695Z,1478890832.695 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0328.lzma
2016-11-11T19:00:32.819Z,1478890832.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:33.124Z,1478890833.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:33.233Z,1478890833.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:33.494Z,1478890833.494 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0328.lzma.bak
2016-11-11T19:00:33.494Z,1478890833.494 [DataOverHttps](INFO): SBD MOMSN=4555672
2016-11-11T19:00:33.532Z,1478890833.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:33.596Z,1478890833.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:34.328Z,1478890834.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:34.832Z,1478890834.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:34.973Z,1478890834.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:35.124Z,1478890835.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:35.536Z,1478890835.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:36.332Z,1478890836.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:37.130Z,1478890837.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:37.596Z,1478890837.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:38.269Z,1478890838.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:38.392Z,1478890838.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:38.397Z,1478890838.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:38.807Z,1478890838.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:39.188Z,1478890839.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:39.190Z,1478890839.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:39.614Z,1478890839.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:39.988Z,1478890839.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:39.999Z,1478890839.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:40.784Z,1478890840.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:41.580Z,1478890841.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:41.988Z,1478890841.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:42.784Z,1478890842.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:43.446Z,1478890843.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:43.472Z,1478890843.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:43.493Z,1478890843.493 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0329.lzma
2016-11-11T19:00:43.561Z,1478890843.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:43.941Z,1478890843.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:44.268Z,1478890844.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:44.278Z,1478890844.277 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0329.lzma.bak
2016-11-11T19:00:44.278Z,1478890844.278 [DataOverHttps](INFO): SBD MOMSN=4555674
2016-11-11T19:00:44.358Z,1478890844.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:45.068Z,1478890845.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:45.492Z,1478890845.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:45.893Z,1478890845.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:45.910Z,1478890845.910 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T19:00:45.910Z,1478890845.910 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T19:00:45.910Z,1478890845.910 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T19:00:46.020Z,1478890846.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:46.288Z,1478890846.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:47.085Z,1478890847.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:47.496Z,1478890847.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:48.292Z,1478890848.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:49.088Z,1478890849.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:49.490Z,1478890849.490 [BPC1](ERROR): Failed to receive battery data
2016-11-11T19:00:49.490Z,1478890849.490 [BPC1] Communications Fault, FailCount= 1
2016-11-11T19:00:49.490Z,1478890849.490 [BPC1](ERROR): Communications Fault
2016-11-11T19:00:49.496Z,1478890849.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:49.499Z,1478890849.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:49.572Z,1478890849.572 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T19:00:49.645Z,1478890849.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:50.058Z,1478890850.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:50.292Z,1478890850.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:50.431Z,1478890850.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:50.488Z,1478890850.488 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:00:50.488Z,1478890850.488 [BPC1] No Fault, FailCount= 1
2016-11-11T19:00:50.877Z,1478890850.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:51.088Z,1478890851.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:51.265Z,1478890851.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:51.564Z,1478890851.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:51.628Z,1478890851.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:52.031Z,1478890852.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:52.360Z,1478890852.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:52.433Z,1478890852.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:52.826Z,1478890852.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:53.156Z,1478890853.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:53.235Z,1478890853.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:53.634Z,1478890853.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:53.908Z,1478890853.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:54.036Z,1478890854.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:54.439Z,1478890854.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:54.704Z,1478890854.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:54.838Z,1478890854.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:55.250Z,1478890855.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:55.501Z,1478890855.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:55.639Z,1478890855.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:55.914Z,1478890855.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:56.045Z,1478890856.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:56.423Z,1478890856.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:56.708Z,1478890856.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:56.829Z,1478890856.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:57.228Z,1478890857.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:57.448Z,1478890857.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:57.630Z,1478890857.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:58.025Z,1478890858.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:58.245Z,1478890858.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:58.429Z,1478890858.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:58.837Z,1478890858.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:59.049Z,1478890859.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:59.281Z,1478890859.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:00:59.464Z,1478890859.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:00:59.645Z,1478890859.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:00.039Z,1478890860.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:00.260Z,1478890860.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:00.443Z,1478890860.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:00.841Z,1478890860.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:01.057Z,1478890861.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:01.248Z,1478890861.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:01.468Z,1478890861.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:01.637Z,1478890861.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:01.996Z,1478890861.996 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T19:01:02.044Z,1478890862.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:02.264Z,1478890862.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:02.429Z,1478890862.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:02.821Z,1478890862.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:03.060Z,1478890863.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:03.277Z,1478890863.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:03.468Z,1478890863.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:03.637Z,1478890863.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:04.032Z,1478890864.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:04.264Z,1478890864.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:04.470Z,1478890864.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:04.834Z,1478890864.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:05.062Z,1478890865.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:05.250Z,1478890865.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:05.548Z,1478890865.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:05.655Z,1478890865.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:06.025Z,1478890866.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:06.344Z,1478890866.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:06.422Z,1478890866.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:06.821Z,1478890866.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:07.140Z,1478890867.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:07.229Z,1478890867.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:07.584Z,1478890867.584 [NAL9602](INFO): Powering down
2016-11-11T19:01:07.640Z,1478890867.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:07.876Z,1478890867.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:08.022Z,1478890868.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:08.422Z,1478890868.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:08.672Z,1478890868.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:08.921Z,1478890868.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:09.229Z,1478890869.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:09.469Z,1478890869.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:09.622Z,1478890869.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:09.880Z,1478890869.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:10.031Z,1478890870.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:10.429Z,1478890870.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:10.676Z,1478890870.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:10.824Z,1478890870.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:11.233Z,1478890871.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:11.407Z,1478890871.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:11.624Z,1478890871.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:12.025Z,1478890872.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:12.205Z,1478890872.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:12.472Z,1478890872.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:12.833Z,1478890872.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:13.001Z,1478890873.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:13.233Z,1478890873.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:13.420Z,1478890873.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:13.629Z,1478890873.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:14.033Z,1478890874.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:14.216Z,1478890874.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:14.432Z,1478890874.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:14.833Z,1478890874.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:15.015Z,1478890875.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:15.249Z,1478890875.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:15.428Z,1478890875.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:15.636Z,1478890875.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:16.032Z,1478890876.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:16.224Z,1478890876.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:16.442Z,1478890876.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:16.844Z,1478890876.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:17.023Z,1478890877.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:17.238Z,1478890877.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:17.432Z,1478890877.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:17.705Z,1478890877.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:18.023Z,1478890878.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:18.228Z,1478890878.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:18.458Z,1478890878.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:18.823Z,1478890878.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:19.024Z,1478890879.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:19.265Z,1478890879.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:19.514Z,1478890879.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:19.659Z,1478890879.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:20.029Z,1478890880.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:20.308Z,1478890880.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:20.423Z,1478890880.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:20.829Z,1478890880.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:21.104Z,1478890881.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:21.228Z,1478890881.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:21.624Z,1478890881.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:21.860Z,1478890881.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:22.027Z,1478890882.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:22.429Z,1478890882.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:22.656Z,1478890882.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:22.828Z,1478890882.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:23.228Z,1478890883.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:23.453Z,1478890883.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:23.629Z,1478890883.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:23.876Z,1478890883.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:24.029Z,1478890884.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:24.434Z,1478890884.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:24.672Z,1478890884.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:24.829Z,1478890884.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:25.233Z,1478890885.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:25.384Z,1478890885.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:25.633Z,1478890885.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:26.034Z,1478890886.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:26.180Z,1478890886.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:26.435Z,1478890886.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:26.832Z,1478890886.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:26.977Z,1478890886.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:27.233Z,1478890887.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:27.388Z,1478890887.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:27.626Z,1478890887.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:28.033Z,1478890888.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:28.184Z,1478890888.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:28.433Z,1478890888.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:28.826Z,1478890888.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:28.981Z,1478890888.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:29.230Z,1478890889.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:29.392Z,1478890889.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:29.625Z,1478890889.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:30.026Z,1478890890.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:30.188Z,1478890890.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:30.426Z,1478890890.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:30.832Z,1478890890.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:30.985Z,1478890890.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:31.225Z,1478890891.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:31.396Z,1478890891.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:31.650Z,1478890891.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:32.042Z,1478890892.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:32.192Z,1478890892.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:32.436Z,1478890892.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:32.828Z,1478890892.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:32.988Z,1478890892.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:33.266Z,1478890893.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:33.484Z,1478890893.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:33.633Z,1478890893.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:34.066Z,1478890894.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:34.280Z,1478890894.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:34.454Z,1478890894.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:34.829Z,1478890894.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:35.076Z,1478890895.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:35.223Z,1478890895.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:35.630Z,1478890895.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:35.832Z,1478890895.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:36.024Z,1478890896.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:36.424Z,1478890896.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:36.628Z,1478890896.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:36.837Z,1478890896.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:37.229Z,1478890897.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:37.425Z,1478890897.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:37.624Z,1478890897.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:37.836Z,1478890897.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:38.039Z,1478890898.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:38.434Z,1478890898.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:38.632Z,1478890898.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:38.826Z,1478890898.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:39.233Z,1478890899.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:39.364Z,1478890899.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:39.629Z,1478890899.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:40.025Z,1478890900.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:40.164Z,1478890900.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:40.432Z,1478890900.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:40.833Z,1478890900.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:40.963Z,1478890900.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:41.226Z,1478890901.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:41.380Z,1478890901.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:41.626Z,1478890901.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:42.031Z,1478890902.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:42.176Z,1478890902.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:42.426Z,1478890902.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:42.833Z,1478890902.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:42.974Z,1478890902.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:43.234Z,1478890903.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:43.384Z,1478890903.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:43.626Z,1478890903.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:44.033Z,1478890904.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:44.184Z,1478890904.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:44.449Z,1478890904.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:44.824Z,1478890904.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:44.982Z,1478890904.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:45.228Z,1478890905.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:45.392Z,1478890905.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:45.623Z,1478890905.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:46.032Z,1478890906.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:46.188Z,1478890906.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:46.481Z,1478890906.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:46.984Z,1478890906.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:47.460Z,1478890907.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:48.256Z,1478890908.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:49.052Z,1478890909.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:49.824Z,1478890909.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:50.033Z,1478890910.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:50.173Z,1478890910.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:50.585Z,1478890910.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:50.620Z,1478890910.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:50.977Z,1478890910.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:51.416Z,1478890911.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:51.460Z,1478890911.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:51.773Z,1478890911.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:51.828Z,1478890911.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:52.172Z,1478890912.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:52.576Z,1478890912.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:52.624Z,1478890912.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:53.029Z,1478890913.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:53.352Z,1478890913.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:53.358Z,1478890913.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:53.754Z,1478890913.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:54.148Z,1478890914.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:54.169Z,1478890914.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:54.581Z,1478890914.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:54.945Z,1478890914.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:55.063Z,1478890915.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:55.357Z,1478890915.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:55.367Z,1478890915.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:55.764Z,1478890915.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:56.152Z,1478890916.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:56.176Z,1478890916.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:56.548Z,1478890916.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:56.948Z,1478890916.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:57.033Z,1478890917.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:57.367Z,1478890917.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:57.380Z,1478890917.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:57.754Z,1478890917.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:58.174Z,1478890918.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:58.176Z,1478890918.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:58.564Z,1478890918.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:58.972Z,1478890918.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:59.035Z,1478890919.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:59.349Z,1478890919.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:01:59.412Z,1478890919.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:01:59.773Z,1478890919.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:00.181Z,1478890920.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:00.208Z,1478890920.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:00.552Z,1478890920.552 [PNI_TCM](ERROR): CRC does not match. Expected:0x32365 got:0x49579
2016-11-11T19:02:00.573Z,1478890920.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:00.956Z,1478890920.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:01.009Z,1478890921.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:01.345Z,1478890921.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:01.436Z,1478890921.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:01.777Z,1478890921.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:02.169Z,1478890922.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:02.232Z,1478890922.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:02.554Z,1478890922.554 [PNI_TCM](ERROR): CRC does not match. Expected:0x34030 got:0x6591
2016-11-11T19:02:02.568Z,1478890922.568 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T19:02:02.568Z,1478890922.568 [BPC1] Data Fault, FailCount= 1
2016-11-11T19:02:02.568Z,1478890922.568 [BPC1](ERROR): Data Fault
2016-11-11T19:02:02.576Z,1478890922.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:02.596Z,1478890922.596 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T19:02:02.984Z,1478890922.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:03.028Z,1478890923.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:03.409Z,1478890923.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:03.733Z,1478890923.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:03.773Z,1478890923.773 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:02:03.773Z,1478890923.773 [BPC1] No Fault, FailCount= 1
2016-11-11T19:02:03.792Z,1478890923.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:04.276Z,1478890924.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:04.574Z,1478890924.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:04.588Z,1478890924.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:04.962Z,1478890924.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:05.384Z,1478890925.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:05.397Z,1478890925.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:05.780Z,1478890925.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:05.812Z,1478890925.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:06.161Z,1478890926.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:06.553Z,1478890926.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:06.608Z,1478890926.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:06.971Z,1478890926.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:07.357Z,1478890927.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:07.384Z,1478890927.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:07.752Z,1478890927.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:08.162Z,1478890928.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:08.180Z,1478890928.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:08.562Z,1478890928.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:08.976Z,1478890928.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:09.002Z,1478890929.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:09.384Z,1478890929.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:09.388Z,1478890929.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:09.769Z,1478890929.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:10.138Z,1478890930.138 [PNI_TCM](ERROR): CRC does not match. Expected:0x57765 got:0x48719
2016-11-11T19:02:10.184Z,1478890930.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:10.192Z,1478890930.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:10.562Z,1478890930.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:10.980Z,1478890930.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:11.005Z,1478890931.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:11.362Z,1478890931.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:11.388Z,1478890931.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:11.756Z,1478890931.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:12.149Z,1478890932.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:12.184Z,1478890932.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:12.558Z,1478890932.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:12.969Z,1478890932.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:12.980Z,1478890932.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:13.362Z,1478890933.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:13.388Z,1478890933.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:13.769Z,1478890933.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:14.160Z,1478890934.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:14.184Z,1478890934.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:14.563Z,1478890934.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:14.946Z,1478890934.946 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T19:02:14.983Z,1478890934.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:15.053Z,1478890935.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:15.362Z,1478890935.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:15.412Z,1478890935.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:15.765Z,1478890935.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:16.208Z,1478890936.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:16.225Z,1478890936.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:16.594Z,1478890936.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:16.957Z,1478890936.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:17.004Z,1478890937.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:17.433Z,1478890937.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:17.751Z,1478890937.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:17.780Z,1478890937.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:18.169Z,1478890938.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:18.561Z,1478890938.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:18.576Z,1478890938.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:18.958Z,1478890938.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:19.373Z,1478890939.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:19.432Z,1478890939.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:19.768Z,1478890939.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:19.784Z,1478890939.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:20.139Z,1478890940.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:20.553Z,1478890940.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:20.580Z,1478890940.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:20.998Z,1478890940.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:21.344Z,1478890941.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:21.356Z,1478890941.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:21.750Z,1478890941.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:22.140Z,1478890942.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:22.173Z,1478890942.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:22.535Z,1478890942.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:22.936Z,1478890942.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:22.962Z,1478890942.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:23.344Z,1478890943.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:23.350Z,1478890943.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:23.741Z,1478890943.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:24.140Z,1478890944.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:24.150Z,1478890944.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:24.549Z,1478890944.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:24.936Z,1478890944.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:24.969Z,1478890944.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:25.344Z,1478890945.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:25.350Z,1478890945.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:25.751Z,1478890945.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:26.140Z,1478890946.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:26.157Z,1478890946.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:26.556Z,1478890946.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:26.936Z,1478890946.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:27.010Z,1478890947.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:27.344Z,1478890947.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:27.346Z,1478890947.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:27.741Z,1478890947.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:28.138Z,1478890948.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:28.140Z,1478890948.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:28.545Z,1478890948.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:28.936Z,1478890948.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:28.994Z,1478890948.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:29.342Z,1478890949.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:29.388Z,1478890949.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:29.739Z,1478890949.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:30.149Z,1478890950.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:30.184Z,1478890950.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:30.609Z,1478890950.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:30.948Z,1478890950.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:30.980Z,1478890950.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:31.445Z,1478890951.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:31.748Z,1478890951.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:31.753Z,1478890951.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:32.165Z,1478890952.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:32.544Z,1478890952.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:32.559Z,1478890952.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:32.953Z,1478890952.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:33.340Z,1478890953.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:33.416Z,1478890953.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:33.752Z,1478890953.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:33.765Z,1478890953.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:34.137Z,1478890954.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:34.532Z,1478890954.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:34.548Z,1478890954.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:34.965Z,1478890954.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:35.276Z,1478890955.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:35.346Z,1478890955.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:35.754Z,1478890955.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:36.073Z,1478890956.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:36.151Z,1478890956.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:36.552Z,1478890956.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:36.869Z,1478890956.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:36.964Z,1478890956.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:37.281Z,1478890957.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:37.353Z,1478890957.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:37.762Z,1478890957.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:38.076Z,1478890958.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:38.157Z,1478890958.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:38.545Z,1478890958.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:38.873Z,1478890958.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:39.039Z,1478890959.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:39.304Z,1478890959.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:39.353Z,1478890959.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:39.739Z,1478890959.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:40.100Z,1478890960.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:40.148Z,1478890960.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:40.549Z,1478890960.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:40.896Z,1478890960.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:40.961Z,1478890960.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:41.306Z,1478890961.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:41.349Z,1478890961.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:41.740Z,1478890961.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:42.100Z,1478890962.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:42.150Z,1478890962.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:42.541Z,1478890962.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:42.896Z,1478890962.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:43.004Z,1478890963.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:43.340Z,1478890963.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:43.364Z,1478890963.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:43.738Z,1478890963.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:44.135Z,1478890964.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:44.160Z,1478890964.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:44.577Z,1478890964.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:44.956Z,1478890964.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:44.972Z,1478890964.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:45.382Z,1478890965.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:45.741Z,1478890965.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:45.752Z,1478890965.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:46.160Z,1478890966.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:46.184Z,1478890966.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:46.543Z,1478890966.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:46.956Z,1478890966.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:47.728Z,1478890967.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:48.524Z,1478890968.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:49.248Z,1478890969.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:50.044Z,1478890970.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:50.146Z,1478890970.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:50.269Z,1478890970.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:50.643Z,1478890970.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:50.841Z,1478890970.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:51.020Z,1478890971.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:51.252Z,1478890971.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:51.416Z,1478890971.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:51.823Z,1478890971.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:52.048Z,1478890972.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:52.226Z,1478890972.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:52.620Z,1478890972.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:52.856Z,1478890972.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:53.023Z,1478890973.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:53.268Z,1478890973.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:53.425Z,1478890973.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:53.817Z,1478890973.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:54.064Z,1478890974.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:54.229Z,1478890974.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:54.626Z,1478890974.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:54.861Z,1478890974.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:55.026Z,1478890975.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:55.272Z,1478890975.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:55.422Z,1478890975.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:55.830Z,1478890975.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:56.068Z,1478890976.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:56.228Z,1478890976.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:56.618Z,1478890976.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:56.864Z,1478890976.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:57.026Z,1478890977.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:57.352Z,1478890977.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:57.420Z,1478890977.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:57.845Z,1478890977.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:58.148Z,1478890978.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:58.221Z,1478890978.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:58.620Z,1478890978.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:58.946Z,1478890978.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:59.026Z,1478890979.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:59.418Z,1478890979.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:02:59.700Z,1478890979.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:02:59.829Z,1478890979.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:00.225Z,1478890980.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:00.496Z,1478890980.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:00.629Z,1478890980.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:01.024Z,1478890981.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:01.293Z,1478890981.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:01.428Z,1478890981.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:01.704Z,1478890981.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:01.834Z,1478890981.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:02.225Z,1478890982.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:02.500Z,1478890982.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:02.649Z,1478890982.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:03.077Z,1478890983.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:03.228Z,1478890983.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:03.424Z,1478890983.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:03.858Z,1478890983.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:04.024Z,1478890984.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:04.219Z,1478890984.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:04.657Z,1478890984.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:04.821Z,1478890984.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:05.057Z,1478890985.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:05.232Z,1478890985.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:05.422Z,1478890985.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:05.819Z,1478890985.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:06.028Z,1478890986.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:06.218Z,1478890986.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:06.625Z,1478890986.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:06.825Z,1478890986.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:07.033Z,1478890987.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:07.236Z,1478890987.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:07.421Z,1478890987.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:07.826Z,1478890987.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:08.032Z,1478890988.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:08.221Z,1478890988.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:08.617Z,1478890988.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:08.829Z,1478890988.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:09.018Z,1478890989.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:09.240Z,1478890989.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:09.417Z,1478890989.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:09.825Z,1478890989.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:10.036Z,1478890990.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:10.217Z,1478890990.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:10.616Z,1478890990.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:10.832Z,1478890990.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:11.029Z,1478890991.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:11.324Z,1478890991.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:11.430Z,1478890991.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:11.822Z,1478890991.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:12.120Z,1478890992.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:12.225Z,1478890992.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:12.621Z,1478890992.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:12.916Z,1478890992.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:13.025Z,1478890993.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:13.429Z,1478890993.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:13.680Z,1478890993.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:13.834Z,1478890993.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:14.224Z,1478890994.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:14.476Z,1478890994.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:14.624Z,1478890994.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:15.025Z,1478890995.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:15.273Z,1478890995.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:15.425Z,1478890995.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:15.688Z,1478890995.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:15.826Z,1478890995.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:16.224Z,1478890996.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:16.484Z,1478890996.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:16.626Z,1478890996.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:17.069Z,1478890997.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:17.212Z,1478890997.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:17.413Z,1478890997.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:17.841Z,1478890997.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:18.008Z,1478890998.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:18.225Z,1478890998.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:18.638Z,1478890998.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:18.805Z,1478890998.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:19.060Z,1478890999.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:19.216Z,1478890999.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:19.424Z,1478890999.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:19.830Z,1478890999.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:20.012Z,1478891000.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:20.220Z,1478891000.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:20.620Z,1478891000.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:20.809Z,1478891000.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:21.026Z,1478891001.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:21.220Z,1478891001.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:21.424Z,1478891001.424 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:21.424Z,1478891001.424 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 264
2016-11-11T19:03:21.424Z,1478891001.424 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:03:21.430Z,1478891001.430 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:21.431Z,1478891001.431 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 264
2016-11-11T19:03:21.431Z,1478891001.431 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:03:21.433Z,1478891001.433 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:21.433Z,1478891001.433 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 264
2016-11-11T19:03:21.433Z,1478891001.433 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:03:21.447Z,1478891001.447 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:03:21.448Z,1478891001.448 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:03:21.448Z,1478891001.448 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:03:21.843Z,1478891001.843 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:03:21.843Z,1478891001.843 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 264
2016-11-11T19:03:21.844Z,1478891001.844 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:03:21.844Z,1478891001.844 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 264
2016-11-11T19:03:21.844Z,1478891001.844 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:03:21.845Z,1478891001.845 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 264
2016-11-11T19:03:22.016Z,1478891002.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:22.234Z,1478891002.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:03:22.235Z,1478891002.234 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:03:22.235Z,1478891002.235 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:03:22.239Z,1478891002.239 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:03:22.240Z,1478891002.240 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:03:22.240Z,1478891002.240 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:03:22.241Z,1478891002.241 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:03:22.241Z,1478891002.241 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:03:22.242Z,1478891002.241 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:03:22.612Z,1478891002.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:22.814Z,1478891002.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:23.039Z,1478891003.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:23.232Z,1478891003.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:23.417Z,1478891003.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:23.811Z,1478891003.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:24.028Z,1478891004.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:24.217Z,1478891004.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:24.611Z,1478891004.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:24.824Z,1478891004.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:25.021Z,1478891005.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:25.300Z,1478891005.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:25.421Z,1478891005.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:25.817Z,1478891005.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:26.096Z,1478891006.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:26.219Z,1478891006.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:26.615Z,1478891006.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:26.892Z,1478891006.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:27.024Z,1478891007.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:27.423Z,1478891007.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:27.664Z,1478891007.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:27.817Z,1478891007.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:28.232Z,1478891008.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:28.460Z,1478891008.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:28.617Z,1478891008.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:29.023Z,1478891009.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:29.257Z,1478891009.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:29.426Z,1478891009.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:29.668Z,1478891009.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:29.823Z,1478891009.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:30.216Z,1478891010.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:30.464Z,1478891010.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:30.631Z,1478891010.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:31.081Z,1478891011.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:31.188Z,1478891011.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:31.431Z,1478891011.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:31.833Z,1478891011.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:31.984Z,1478891011.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:32.249Z,1478891012.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:32.613Z,1478891012.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:32.781Z,1478891012.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:33.057Z,1478891013.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:33.192Z,1478891013.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:33.412Z,1478891013.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:33.849Z,1478891013.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:33.988Z,1478891013.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:34.212Z,1478891014.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:34.616Z,1478891014.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:34.785Z,1478891014.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:35.023Z,1478891015.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:35.200Z,1478891015.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:35.419Z,1478891015.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:35.819Z,1478891015.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:35.999Z,1478891015.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:36.221Z,1478891016.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:36.629Z,1478891016.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:36.800Z,1478891016.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:37.029Z,1478891017.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:37.208Z,1478891017.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:37.425Z,1478891017.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:37.824Z,1478891017.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:38.004Z,1478891018.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:38.226Z,1478891018.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:38.625Z,1478891018.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:38.800Z,1478891018.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:39.024Z,1478891019.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:39.308Z,1478891019.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:39.428Z,1478891019.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:39.826Z,1478891019.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:40.104Z,1478891020.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:40.225Z,1478891020.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:40.625Z,1478891020.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:40.900Z,1478891020.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:41.024Z,1478891021.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:41.438Z,1478891021.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:41.636Z,1478891021.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:41.830Z,1478891021.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:42.214Z,1478891022.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:42.432Z,1478891022.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:42.612Z,1478891022.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:43.020Z,1478891023.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:43.229Z,1478891023.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:43.424Z,1478891023.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:43.648Z,1478891023.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:43.825Z,1478891023.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:44.215Z,1478891024.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:44.444Z,1478891024.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:44.621Z,1478891024.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:45.021Z,1478891025.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:45.164Z,1478891025.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:45.461Z,1478891025.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:45.838Z,1478891025.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:45.960Z,1478891025.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:46.222Z,1478891026.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:46.645Z,1478891026.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:46.757Z,1478891026.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:47.168Z,1478891027.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:47.964Z,1478891027.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:48.761Z,1478891028.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:49.172Z,1478891029.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:49.968Z,1478891029.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:50.073Z,1478891030.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:50.209Z,1478891030.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:50.605Z,1478891030.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:50.765Z,1478891030.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:50.992Z,1478891030.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:51.184Z,1478891031.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:51.364Z,1478891031.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:51.769Z,1478891031.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:51.980Z,1478891031.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:52.192Z,1478891032.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:52.569Z,1478891032.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:52.778Z,1478891032.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:52.964Z,1478891032.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:53.260Z,1478891033.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:53.373Z,1478891033.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:53.767Z,1478891033.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:54.056Z,1478891034.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:54.171Z,1478891034.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:54.577Z,1478891034.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:54.852Z,1478891034.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:54.978Z,1478891034.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:55.377Z,1478891035.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:55.628Z,1478891035.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:55.777Z,1478891035.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:56.171Z,1478891036.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:56.424Z,1478891036.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:56.585Z,1478891036.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:56.982Z,1478891036.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:57.221Z,1478891037.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:57.372Z,1478891037.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:57.632Z,1478891037.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:57.774Z,1478891037.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:58.173Z,1478891038.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:58.428Z,1478891038.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:58.577Z,1478891038.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:58.977Z,1478891038.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:59.145Z,1478891039.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:03:59.380Z,1478891039.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:59.774Z,1478891039.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:03:59.940Z,1478891039.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:00.180Z,1478891040.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:00.584Z,1478891040.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:00.737Z,1478891040.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:00.981Z,1478891040.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:01.386Z,1478891041.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:01.532Z,1478891041.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:01.789Z,1478891041.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:01.940Z,1478891041.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:02.197Z,1478891042.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:02.653Z,1478891042.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:02.737Z,1478891042.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:02.976Z,1478891042.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:03.148Z,1478891043.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:03.388Z,1478891043.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:03.797Z,1478891043.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:03.944Z,1478891043.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:04.191Z,1478891044.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:04.601Z,1478891044.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:04.744Z,1478891044.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:05.005Z,1478891045.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:05.164Z,1478891045.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:05.391Z,1478891045.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:05.785Z,1478891045.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:05.960Z,1478891045.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:06.169Z,1478891046.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:06.569Z,1478891046.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:06.756Z,1478891046.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:06.981Z,1478891046.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:07.248Z,1478891047.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:07.377Z,1478891047.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:07.775Z,1478891047.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:08.044Z,1478891048.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:08.176Z,1478891048.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:08.577Z,1478891048.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:08.840Z,1478891048.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:08.974Z,1478891048.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:09.372Z,1478891049.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:09.592Z,1478891049.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:09.777Z,1478891049.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:10.177Z,1478891050.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:10.388Z,1478891050.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:10.573Z,1478891050.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:10.978Z,1478891050.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:11.185Z,1478891051.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:11.372Z,1478891051.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:11.600Z,1478891051.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:11.780Z,1478891051.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:12.177Z,1478891052.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:12.398Z,1478891052.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:12.577Z,1478891052.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:12.974Z,1478891052.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:13.124Z,1478891053.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:13.383Z,1478891053.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:13.777Z,1478891053.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:13.920Z,1478891053.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:14.180Z,1478891054.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:14.593Z,1478891054.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:14.717Z,1478891054.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:14.975Z,1478891054.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:15.128Z,1478891055.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:15.380Z,1478891055.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:15.774Z,1478891055.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:15.924Z,1478891055.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:16.183Z,1478891056.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:16.578Z,1478891056.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:16.721Z,1478891056.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:17.042Z,1478891057.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:17.132Z,1478891057.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:17.385Z,1478891057.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:17.776Z,1478891057.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:17.928Z,1478891057.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:18.205Z,1478891058.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:18.563Z,1478891058.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:18.726Z,1478891058.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:19.006Z,1478891059.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:19.140Z,1478891059.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:19.369Z,1478891059.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:19.798Z,1478891059.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:19.936Z,1478891059.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:20.168Z,1478891060.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:20.569Z,1478891060.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:20.735Z,1478891060.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:20.975Z,1478891060.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:21.224Z,1478891061.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:21.372Z,1478891061.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:21.784Z,1478891061.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:22.020Z,1478891062.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:22.177Z,1478891062.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:22.571Z,1478891062.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:22.816Z,1478891062.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:22.980Z,1478891062.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:23.378Z,1478891063.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:23.572Z,1478891063.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:23.774Z,1478891063.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:24.180Z,1478891064.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:24.368Z,1478891064.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:24.582Z,1478891064.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:24.974Z,1478891064.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:25.165Z,1478891065.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:25.381Z,1478891065.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:25.576Z,1478891065.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:25.780Z,1478891065.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:26.174Z,1478891066.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:26.372Z,1478891066.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:26.581Z,1478891066.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:26.989Z,1478891066.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:27.106Z,1478891067.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:27.373Z,1478891067.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:27.781Z,1478891067.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:27.900Z,1478891067.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:28.173Z,1478891068.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:28.574Z,1478891068.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:28.697Z,1478891068.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:28.980Z,1478891068.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:29.108Z,1478891069.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:29.381Z,1478891069.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:29.783Z,1478891069.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:29.904Z,1478891069.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:30.183Z,1478891070.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:30.601Z,1478891070.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:30.701Z,1478891070.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:30.972Z,1478891070.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:31.112Z,1478891071.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:31.375Z,1478891071.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:31.829Z,1478891071.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:31.908Z,1478891071.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:32.189Z,1478891072.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:32.602Z,1478891072.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:32.705Z,1478891072.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:32.971Z,1478891072.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:33.116Z,1478891073.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:33.405Z,1478891073.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:33.790Z,1478891073.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:33.912Z,1478891073.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:34.170Z,1478891074.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:34.571Z,1478891074.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:34.708Z,1478891074.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:34.978Z,1478891074.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:35.228Z,1478891075.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:35.371Z,1478891075.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:35.771Z,1478891075.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:36.024Z,1478891076.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:36.185Z,1478891076.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:36.571Z,1478891076.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:36.820Z,1478891076.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:36.977Z,1478891076.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:37.379Z,1478891077.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:37.556Z,1478891077.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:37.776Z,1478891077.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:38.174Z,1478891078.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:38.354Z,1478891078.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:38.577Z,1478891078.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:38.994Z,1478891078.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:39.149Z,1478891079.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:39.385Z,1478891079.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:39.568Z,1478891079.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:39.778Z,1478891079.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:40.182Z,1478891080.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:40.364Z,1478891080.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:40.574Z,1478891080.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:40.984Z,1478891080.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:41.096Z,1478891081.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:41.384Z,1478891081.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:41.785Z,1478891081.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:41.892Z,1478891081.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:42.188Z,1478891082.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:42.592Z,1478891082.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:42.689Z,1478891082.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:42.976Z,1478891082.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:43.100Z,1478891083.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:43.372Z,1478891083.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:43.771Z,1478891083.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:43.896Z,1478891083.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:44.171Z,1478891084.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:44.575Z,1478891084.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:44.693Z,1478891084.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:44.964Z,1478891084.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:45.104Z,1478891085.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:45.364Z,1478891085.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:45.821Z,1478891085.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:45.900Z,1478891085.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:46.177Z,1478891086.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:46.609Z,1478891086.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:46.697Z,1478891086.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:46.983Z,1478891086.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:47.104Z,1478891087.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:47.900Z,1478891087.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:48.696Z,1478891088.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:49.172Z,1478891089.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:49.968Z,1478891089.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:50.426Z,1478891090.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:50.573Z,1478891090.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:50.764Z,1478891090.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:50.953Z,1478891090.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:51.314Z,1478891091.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:51.532Z,1478891091.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:51.716Z,1478891091.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:52.114Z,1478891092.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:52.328Z,1478891092.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:52.519Z,1478891092.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:52.915Z,1478891092.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:53.125Z,1478891093.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:53.329Z,1478891093.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:53.536Z,1478891093.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:53.725Z,1478891093.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:54.116Z,1478891094.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:54.332Z,1478891094.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:54.524Z,1478891094.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:54.922Z,1478891094.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:55.060Z,1478891095.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:55.326Z,1478891095.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:55.725Z,1478891095.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:55.856Z,1478891095.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:56.126Z,1478891096.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:56.518Z,1478891096.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:56.653Z,1478891096.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:56.927Z,1478891096.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:57.064Z,1478891097.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:57.326Z,1478891097.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:57.718Z,1478891097.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:57.860Z,1478891097.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:58.129Z,1478891098.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:58.524Z,1478891098.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:58.657Z,1478891098.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:58.921Z,1478891098.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:59.068Z,1478891099.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:04:59.321Z,1478891099.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:59.721Z,1478891099.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:04:59.864Z,1478891099.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:00.118Z,1478891100.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:00.536Z,1478891100.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:00.661Z,1478891100.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:00.921Z,1478891100.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:01.072Z,1478891101.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:01.313Z,1478891101.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:01.717Z,1478891101.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:01.868Z,1478891101.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:02.115Z,1478891102.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:02.516Z,1478891102.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:02.664Z,1478891102.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:02.981Z,1478891102.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:03.156Z,1478891103.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:03.322Z,1478891103.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:03.716Z,1478891103.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:03.952Z,1478891103.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:04.132Z,1478891104.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:04.517Z,1478891104.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:04.748Z,1478891104.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:04.918Z,1478891104.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:05.323Z,1478891105.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:05.512Z,1478891105.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:05.726Z,1478891105.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:06.109Z,1478891106.109 [BPC1](ERROR): Failed to receive battery data
2016-11-11T19:05:06.109Z,1478891106.109 [BPC1] Communications Fault, FailCount= 1
2016-11-11T19:05:06.109Z,1478891106.109 [BPC1](ERROR): Communications Fault
2016-11-11T19:05:06.118Z,1478891106.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:06.138Z,1478891106.138 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T19:05:06.308Z,1478891106.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:06.523Z,1478891106.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:06.926Z,1478891106.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:07.106Z,1478891107.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:07.316Z,1478891107.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:07.336Z,1478891107.336 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:05:07.336Z,1478891107.336 [BPC1] No Fault, FailCount= 1
2016-11-11T19:05:07.516Z,1478891107.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:07.785Z,1478891107.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:08.141Z,1478891108.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:08.312Z,1478891108.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:08.524Z,1478891108.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:08.929Z,1478891108.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:09.036Z,1478891109.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:09.329Z,1478891109.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:09.720Z,1478891109.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:09.832Z,1478891109.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:10.132Z,1478891110.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:10.535Z,1478891110.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:10.629Z,1478891110.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:10.929Z,1478891110.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:11.040Z,1478891111.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:11.312Z,1478891111.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:11.730Z,1478891111.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:11.836Z,1478891111.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:12.115Z,1478891112.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:12.512Z,1478891112.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:12.635Z,1478891112.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:12.930Z,1478891112.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:13.052Z,1478891113.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:13.315Z,1478891113.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:13.754Z,1478891113.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:13.848Z,1478891113.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:14.125Z,1478891114.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:14.553Z,1478891114.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:14.645Z,1478891114.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:14.951Z,1478891114.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:15.056Z,1478891115.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:15.317Z,1478891115.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:15.719Z,1478891115.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:15.852Z,1478891115.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:16.127Z,1478891116.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:16.517Z,1478891116.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:16.648Z,1478891116.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:16.921Z,1478891116.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:17.140Z,1478891117.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:17.318Z,1478891117.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:17.726Z,1478891117.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:17.936Z,1478891117.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:18.117Z,1478891118.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:18.526Z,1478891118.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:18.732Z,1478891118.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:18.942Z,1478891118.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:19.315Z,1478891119.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:19.492Z,1478891119.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:19.714Z,1478891119.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:20.121Z,1478891120.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:20.289Z,1478891120.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:20.515Z,1478891120.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:20.934Z,1478891120.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:21.085Z,1478891121.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:21.313Z,1478891121.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:21.496Z,1478891121.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:21.733Z,1478891121.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:22.117Z,1478891122.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:22.292Z,1478891122.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:22.517Z,1478891122.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:22.924Z,1478891122.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:23.024Z,1478891123.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:23.334Z,1478891123.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:23.735Z,1478891123.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:23.820Z,1478891123.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:24.134Z,1478891124.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:24.531Z,1478891124.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:24.617Z,1478891124.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:24.925Z,1478891124.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:25.028Z,1478891125.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:25.317Z,1478891125.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:25.753Z,1478891125.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:25.824Z,1478891125.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:26.118Z,1478891126.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:26.557Z,1478891126.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:26.621Z,1478891126.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:26.933Z,1478891126.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:27.032Z,1478891127.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:27.338Z,1478891127.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:27.728Z,1478891127.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:27.828Z,1478891127.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:28.135Z,1478891128.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:28.528Z,1478891128.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:28.636Z,1478891128.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:28.942Z,1478891128.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:29.044Z,1478891129.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:29.335Z,1478891129.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:29.735Z,1478891129.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:29.840Z,1478891129.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:30.129Z,1478891130.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:30.517Z,1478891130.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:30.636Z,1478891130.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:30.940Z,1478891130.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:31.112Z,1478891131.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:31.313Z,1478891131.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:31.713Z,1478891131.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:31.908Z,1478891131.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:32.122Z,1478891132.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:32.511Z,1478891132.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:32.704Z,1478891132.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:32.915Z,1478891132.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:33.321Z,1478891133.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:33.468Z,1478891133.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:33.715Z,1478891133.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:34.121Z,1478891134.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:34.264Z,1478891134.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:34.527Z,1478891134.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:34.923Z,1478891134.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:35.061Z,1478891135.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:35.307Z,1478891135.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:35.476Z,1478891135.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:35.712Z,1478891135.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:36.123Z,1478891136.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:36.272Z,1478891136.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:36.521Z,1478891136.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:36.936Z,1478891136.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:36.000Z,1478891137.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:37.308Z,1478891137.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:37.713Z,1478891137.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:37.796Z,1478891137.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:38.117Z,1478891138.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:38.521Z,1478891138.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:38.592Z,1478891138.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:38.916Z,1478891138.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:39.016Z,1478891139.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:39.321Z,1478891139.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:39.720Z,1478891139.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:39.812Z,1478891139.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:40.174Z,1478891140.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:40.526Z,1478891140.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:40.609Z,1478891140.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:40.924Z,1478891140.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:41.020Z,1478891141.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:41.361Z,1478891141.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:41.728Z,1478891141.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:41.816Z,1478891141.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:42.124Z,1478891142.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:42.537Z,1478891142.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:42.612Z,1478891142.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:42.920Z,1478891142.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:43.020Z,1478891143.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:43.350Z,1478891143.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:43.757Z,1478891143.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:43.816Z,1478891143.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:44.129Z,1478891144.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:44.519Z,1478891144.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:44.612Z,1478891144.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:44.932Z,1478891144.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:45.084Z,1478891145.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:45.315Z,1478891145.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:45.716Z,1478891145.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:45.880Z,1478891145.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:46.121Z,1478891146.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:46.129Z,1478891146.129 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T19:05:46.130Z,1478891146.130 [Default:CheckIn:C.Wait] Stopped
2016-11-11T19:05:46.130Z,1478891146.130 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T19:05:46.130Z,1478891146.130 [Default:CheckIn:D] Running Loop=1
2016-11-11T19:05:46.516Z,1478891146.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:46.524Z,1478891146.524 [Default:CheckIn:D] Stopped
2016-11-11T19:05:46.524Z,1478891146.524 [Default:CheckIn:E] Running Loop=1
2016-11-11T19:05:46.676Z,1478891146.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:46.918Z,1478891146.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:46.927Z,1478891146.927 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 855.753581 min 
2016-11-11T19:05:46.927Z,1478891146.927 [Default:CheckIn:E] Stopped
2016-11-11T19:05:46.928Z,1478891146.928 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T19:05:46.928Z,1478891146.928 [Default:CheckIn] Stopped
2016-11-11T19:05:46.928Z,1478891146.928 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T19:05:46.928Z,1478891146.928 [Default:CheckIn](INFO): Running loop #83
2016-11-11T19:05:46.928Z,1478891146.928 [Default:CheckIn] Running Loop=83
2016-11-11T19:05:46.928Z,1478891146.928 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T19:05:46.928Z,1478891146.928 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T19:05:47.315Z,1478891147.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:47.436Z,1478891147.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:48.232Z,1478891148.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:49.029Z,1478891149.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:49.441Z,1478891149.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:50.236Z,1478891150.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:50.716Z,1478891150.716 [NAL9602](INFO): Powering up
2016-11-11T19:05:50.765Z,1478891150.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:50.905Z,1478891150.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:50.976Z,1478891150.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:51.260Z,1478891151.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:51.652Z,1478891151.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:51.772Z,1478891151.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:52.052Z,1478891152.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:52.453Z,1478891152.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:52.569Z,1478891152.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:52.853Z,1478891152.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:52.980Z,1478891152.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:53.249Z,1478891153.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:53.649Z,1478891153.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:53.776Z,1478891153.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:54.050Z,1478891154.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:54.497Z,1478891154.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:54.573Z,1478891154.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:54.873Z,1478891154.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:54.984Z,1478891154.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:55.253Z,1478891155.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:55.685Z,1478891155.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:55.780Z,1478891155.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:56.064Z,1478891156.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:56.507Z,1478891156.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:56.577Z,1478891156.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:56.861Z,1478891156.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:56.988Z,1478891156.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:57.273Z,1478891157.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:57.642Z,1478891157.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:57.784Z,1478891157.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:58.075Z,1478891158.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:58.444Z,1478891158.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:58.580Z,1478891158.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:58.845Z,1478891158.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:59.068Z,1478891159.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:05:59.240Z,1478891159.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:59.639Z,1478891159.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:05:59.865Z,1478891159.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:00.039Z,1478891160.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:00.439Z,1478891160.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:00.660Z,1478891160.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:00.849Z,1478891160.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:01.257Z,1478891161.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:01.412Z,1478891161.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:01.601Z,1478891161.601 [NAL9602](INFO): NAL9602 initialized
2016-11-11T19:06:01.654Z,1478891161.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:02.045Z,1478891162.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:02.208Z,1478891162.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:02.401Z,1478891162.401 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T19:06:02.401Z,1478891162.401 [NAL9602] Data Fault, FailCount= 5
2016-11-11T19:06:02.401Z,1478891162.401 [NAL9602](ERROR): Data Fault
2016-11-11T19:06:02.465Z,1478891162.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:02.508Z,1478891162.508 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T19:06:02.509Z,1478891162.509 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-11-11T19:06:02.800Z,1478891162.800 [NAL9602](INFO): Powering down
2016-11-11T19:06:02.849Z,1478891162.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:03.005Z,1478891163.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:03.243Z,1478891163.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:03.416Z,1478891163.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:03.637Z,1478891163.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:04.037Z,1478891164.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:04.212Z,1478891164.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:04.441Z,1478891164.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:04.845Z,1478891164.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:04.944Z,1478891164.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:05.239Z,1478891165.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:05.639Z,1478891165.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:05.740Z,1478891165.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:06.041Z,1478891166.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:06.442Z,1478891166.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:06.538Z,1478891166.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:06.841Z,1478891166.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:06.956Z,1478891166.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:07.255Z,1478891167.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:07.688Z,1478891167.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:07.752Z,1478891167.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:08.056Z,1478891168.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:08.479Z,1478891168.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:08.548Z,1478891168.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:08.840Z,1478891168.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:08.960Z,1478891168.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:09.239Z,1478891169.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:09.643Z,1478891169.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:09.756Z,1478891169.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:10.039Z,1478891170.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:10.458Z,1478891170.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:10.553Z,1478891170.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:10.857Z,1478891170.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:10.964Z,1478891170.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:11.250Z,1478891171.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:11.699Z,1478891171.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:11.760Z,1478891171.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:12.052Z,1478891172.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:12.072Z,1478891172.072 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T19:06:12.481Z,1478891172.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:12.557Z,1478891172.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:12.881Z,1478891172.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:13.034Z,1478891173.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:13.305Z,1478891173.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:13.654Z,1478891173.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:13.828Z,1478891173.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:14.038Z,1478891174.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:14.465Z,1478891174.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:14.624Z,1478891174.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:14.836Z,1478891174.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:15.249Z,1478891175.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:15.392Z,1478891175.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:15.645Z,1478891175.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:16.046Z,1478891176.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:16.188Z,1478891176.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:16.445Z,1478891176.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:16.845Z,1478891176.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:16.985Z,1478891176.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:17.240Z,1478891177.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:17.396Z,1478891177.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:17.645Z,1478891177.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:18.043Z,1478891178.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:18.192Z,1478891178.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:18.440Z,1478891178.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:18.851Z,1478891178.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:18.928Z,1478891178.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:19.253Z,1478891179.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:19.652Z,1478891179.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:19.725Z,1478891179.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:20.052Z,1478891180.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:20.453Z,1478891180.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:20.521Z,1478891180.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:20.840Z,1478891180.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:20.937Z,1478891180.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:21.238Z,1478891181.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:21.642Z,1478891181.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:21.732Z,1478891181.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:22.038Z,1478891182.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:22.438Z,1478891182.438 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:22.438Z,1478891182.438 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 265
2016-11-11T19:06:22.438Z,1478891182.438 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:06:22.445Z,1478891182.445 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:22.445Z,1478891182.445 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 265
2016-11-11T19:06:22.445Z,1478891182.445 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:06:22.447Z,1478891182.447 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:22.447Z,1478891182.447 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 265
2016-11-11T19:06:22.447Z,1478891182.447 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:06:22.461Z,1478891182.461 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:06:22.462Z,1478891182.462 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:06:22.462Z,1478891182.462 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:06:22.529Z,1478891182.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:22.886Z,1478891182.886 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:06:22.886Z,1478891182.886 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 265
2016-11-11T19:06:22.891Z,1478891182.891 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:06:22.891Z,1478891182.891 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 265
2016-11-11T19:06:22.892Z,1478891182.892 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:06:22.892Z,1478891182.892 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 265
2016-11-11T19:06:22.944Z,1478891182.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:23.264Z,1478891183.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:06:23.264Z,1478891183.264 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:06:23.265Z,1478891183.265 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:06:23.273Z,1478891183.273 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:06:23.274Z,1478891183.274 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:06:23.274Z,1478891183.274 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:06:23.275Z,1478891183.275 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:06:23.280Z,1478891183.280 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:06:23.280Z,1478891183.280 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:06:23.641Z,1478891183.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:23.740Z,1478891183.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:24.040Z,1478891184.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:24.537Z,1478891184.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:24.560Z,1478891184.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:24.856Z,1478891184.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:24.948Z,1478891184.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:25.243Z,1478891185.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:25.682Z,1478891185.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:25.744Z,1478891185.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:26.049Z,1478891186.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:26.482Z,1478891186.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:26.540Z,1478891186.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:26.886Z,1478891186.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:27.012Z,1478891187.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:27.248Z,1478891187.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:27.654Z,1478891187.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:27.808Z,1478891187.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:28.048Z,1478891188.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:28.485Z,1478891188.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:28.604Z,1478891188.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:28.838Z,1478891188.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:29.245Z,1478891189.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:29.372Z,1478891189.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:29.647Z,1478891189.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:30.089Z,1478891190.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:30.168Z,1478891190.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:30.443Z,1478891190.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:30.849Z,1478891190.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:30.965Z,1478891190.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:31.255Z,1478891191.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:31.376Z,1478891191.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:31.661Z,1478891191.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:32.045Z,1478891192.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:32.172Z,1478891192.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:32.444Z,1478891192.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:32.840Z,1478891192.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:32.908Z,1478891192.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:33.240Z,1478891193.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:33.653Z,1478891193.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:33.704Z,1478891193.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:34.040Z,1478891194.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:34.445Z,1478891194.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:34.501Z,1478891194.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:34.850Z,1478891194.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:34.912Z,1478891194.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:35.252Z,1478891195.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:35.656Z,1478891195.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:35.708Z,1478891195.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:36.053Z,1478891196.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:36.444Z,1478891196.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:36.504Z,1478891196.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:36.838Z,1478891196.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:36.920Z,1478891196.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:37.242Z,1478891197.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:37.673Z,1478891197.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:37.716Z,1478891197.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:38.050Z,1478891198.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:38.438Z,1478891198.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:38.512Z,1478891198.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:38.847Z,1478891198.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:38.924Z,1478891198.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:39.276Z,1478891199.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:39.631Z,1478891199.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:39.720Z,1478891199.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:40.063Z,1478891200.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:40.437Z,1478891200.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:40.516Z,1478891200.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:40.870Z,1478891200.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:40.994Z,1478891200.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:41.323Z,1478891201.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:41.666Z,1478891201.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:41.788Z,1478891201.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:42.039Z,1478891202.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:42.445Z,1478891202.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:42.584Z,1478891202.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:42.845Z,1478891202.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:43.249Z,1478891203.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:43.372Z,1478891203.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:43.639Z,1478891203.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:44.038Z,1478891204.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:44.168Z,1478891204.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:44.446Z,1478891204.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:44.846Z,1478891204.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:44.965Z,1478891204.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:45.287Z,1478891205.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:45.376Z,1478891205.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:45.638Z,1478891205.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:46.044Z,1478891206.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:46.172Z,1478891206.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:46.520Z,1478891206.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:46.869Z,1478891206.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:46.900Z,1478891206.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:47.261Z,1478891207.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:47.639Z,1478891207.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:47.696Z,1478891207.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:48.493Z,1478891208.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:48.908Z,1478891208.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:49.704Z,1478891209.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:50.500Z,1478891210.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:50.908Z,1478891210.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:51.118Z,1478891211.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:51.229Z,1478891211.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:51.602Z,1478891211.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:51.704Z,1478891211.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:52.041Z,1478891212.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:52.402Z,1478891212.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:52.500Z,1478891212.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:52.829Z,1478891212.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:52.908Z,1478891212.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:53.253Z,1478891213.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:53.618Z,1478891213.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:53.704Z,1478891213.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:54.024Z,1478891214.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:54.429Z,1478891214.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:54.500Z,1478891214.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:54.806Z,1478891214.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:55.000Z,1478891215.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:55.240Z,1478891215.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:55.649Z,1478891215.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:55.796Z,1478891215.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:56.006Z,1478891216.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:56.429Z,1478891216.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:56.592Z,1478891216.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:56.829Z,1478891216.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:57.204Z,1478891217.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:57.352Z,1478891217.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:57.621Z,1478891217.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:58.043Z,1478891218.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:58.148Z,1478891218.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:58.418Z,1478891218.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:58.821Z,1478891218.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:58.945Z,1478891218.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:59.238Z,1478891219.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:06:59.356Z,1478891219.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:06:59.602Z,1478891219.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:00.009Z,1478891220.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:00.152Z,1478891220.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:00.408Z,1478891220.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:00.802Z,1478891220.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:00.888Z,1478891220.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:01.198Z,1478891221.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:01.594Z,1478891221.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:01.684Z,1478891221.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:02.008Z,1478891222.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:02.424Z,1478891222.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:02.480Z,1478891222.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:02.817Z,1478891222.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:02.888Z,1478891222.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:03.184Z,1478891223.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:03.591Z,1478891223.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:03.684Z,1478891223.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:04.001Z,1478891224.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:04.390Z,1478891224.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:04.480Z,1478891224.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:04.801Z,1478891224.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:04.904Z,1478891224.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:05.204Z,1478891225.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:05.608Z,1478891225.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:05.700Z,1478891225.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:06.012Z,1478891226.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:06.391Z,1478891226.391 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T19:07:06.391Z,1478891226.391 [BPC1] Data Fault, FailCount= 1
2016-11-11T19:07:06.392Z,1478891226.392 [BPC1](ERROR): Data Fault
2016-11-11T19:07:06.400Z,1478891226.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:06.496Z,1478891226.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:06.529Z,1478891226.529 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T19:07:06.824Z,1478891226.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:06.948Z,1478891226.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:07.217Z,1478891227.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:07.611Z,1478891227.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:07.688Z,1478891227.688 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:07:07.688Z,1478891227.688 [BPC1] No Fault, FailCount= 1
2016-11-11T19:07:07.744Z,1478891227.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:08.090Z,1478891228.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:08.425Z,1478891228.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:08.540Z,1478891228.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:08.806Z,1478891228.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:08.964Z,1478891228.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:09.198Z,1478891229.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:09.609Z,1478891229.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:09.760Z,1478891229.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:10.057Z,1478891230.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:10.407Z,1478891230.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:10.556Z,1478891230.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:10.802Z,1478891230.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:11.184Z,1478891231.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:11.352Z,1478891231.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:11.588Z,1478891231.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:11.990Z,1478891231.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:12.148Z,1478891232.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:12.387Z,1478891232.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:12.783Z,1478891232.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:12.944Z,1478891232.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:13.187Z,1478891233.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:13.583Z,1478891233.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:13.740Z,1478891233.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:13.988Z,1478891233.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:14.386Z,1478891234.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:14.536Z,1478891234.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:14.787Z,1478891234.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:15.187Z,1478891235.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:15.332Z,1478891235.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:15.589Z,1478891235.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:15.987Z,1478891235.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:16.128Z,1478891236.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:16.384Z,1478891236.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:16.787Z,1478891236.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:16.924Z,1478891236.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:17.187Z,1478891237.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:17.588Z,1478891237.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:17.720Z,1478891237.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:17.983Z,1478891237.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:18.389Z,1478891238.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:18.516Z,1478891238.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:18.789Z,1478891238.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:19.206Z,1478891239.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:19.312Z,1478891239.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:19.589Z,1478891239.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:19.989Z,1478891239.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:20.108Z,1478891240.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:20.449Z,1478891240.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:20.780Z,1478891240.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:20.904Z,1478891240.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:21.188Z,1478891241.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:21.606Z,1478891241.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:21.700Z,1478891241.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:21.987Z,1478891241.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:22.411Z,1478891242.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:22.496Z,1478891242.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:22.811Z,1478891242.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:23.187Z,1478891243.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:23.292Z,1478891243.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:23.588Z,1478891243.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:23.989Z,1478891243.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:24.088Z,1478891244.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:24.387Z,1478891244.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:24.784Z,1478891244.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:24.884Z,1478891244.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:25.187Z,1478891245.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:25.601Z,1478891245.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:25.680Z,1478891245.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:25.988Z,1478891245.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:26.387Z,1478891246.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:26.476Z,1478891246.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:26.787Z,1478891246.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:27.187Z,1478891247.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:27.272Z,1478891247.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:27.587Z,1478891247.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:27.987Z,1478891247.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:28.068Z,1478891248.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:28.401Z,1478891248.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:28.787Z,1478891248.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:28.866Z,1478891248.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:29.189Z,1478891249.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:29.588Z,1478891249.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:29.660Z,1478891249.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:29.992Z,1478891249.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:30.398Z,1478891250.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:30.456Z,1478891250.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:30.788Z,1478891250.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:31.185Z,1478891251.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:31.252Z,1478891251.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:31.584Z,1478891251.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:31.988Z,1478891251.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:32.048Z,1478891252.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:32.398Z,1478891252.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:32.783Z,1478891252.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:32.844Z,1478891252.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:33.188Z,1478891253.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:33.609Z,1478891253.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:33.640Z,1478891253.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:33.987Z,1478891253.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:34.394Z,1478891254.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:34.436Z,1478891254.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:34.811Z,1478891254.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:35.232Z,1478891255.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:35.296Z,1478891255.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:35.632Z,1478891255.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:35.997Z,1478891255.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:36.028Z,1478891256.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:36.413Z,1478891256.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:36.652Z,1478891256.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:36.821Z,1478891256.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:37.061Z,1478891257.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:37.228Z,1478891257.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:37.468Z,1478891257.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:37.623Z,1478891257.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:37.876Z,1478891257.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:38.004Z,1478891258.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:38.284Z,1478891258.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:38.412Z,1478891258.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:38.692Z,1478891258.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:38.801Z,1478891258.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:39.100Z,1478891259.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:39.194Z,1478891259.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:39.508Z,1478891259.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:39.608Z,1478891259.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:39.916Z,1478891259.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:40.023Z,1478891260.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:40.324Z,1478891260.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:40.406Z,1478891260.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:40.732Z,1478891260.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:40.794Z,1478891260.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:41.140Z,1478891261.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:41.185Z,1478891261.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:41.596Z,1478891261.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:41.608Z,1478891261.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:42.004Z,1478891262.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:42.022Z,1478891262.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:42.416Z,1478891262.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:42.493Z,1478891262.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:42.807Z,1478891262.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:42.824Z,1478891262.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:43.209Z,1478891263.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:43.232Z,1478891263.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:43.601Z,1478891263.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:44.004Z,1478891264.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:44.028Z,1478891264.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:44.493Z,1478891264.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:44.800Z,1478891264.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:44.814Z,1478891264.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:45.215Z,1478891265.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:45.596Z,1478891265.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:45.607Z,1478891265.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:46.026Z,1478891266.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:46.393Z,1478891266.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:46.461Z,1478891266.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:46.810Z,1478891266.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:46.828Z,1478891266.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:47.221Z,1478891267.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:47.613Z,1478891267.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:47.624Z,1478891267.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:48.017Z,1478891268.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:48.420Z,1478891268.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:48.828Z,1478891268.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:49.624Z,1478891269.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:50.420Z,1478891270.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:50.880Z,1478891270.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:51.676Z,1478891271.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:52.472Z,1478891272.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:53.240Z,1478891273.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:54.036Z,1478891274.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:54.832Z,1478891274.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:55.248Z,1478891275.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:56.044Z,1478891276.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:56.428Z,1478891276.428 [BPC1](ERROR): Failed to receive battery data
2016-11-11T19:07:56.428Z,1478891276.428 [BPC1] Communications Fault, FailCount= 1
2016-11-11T19:07:56.428Z,1478891276.428 [BPC1](ERROR): Communications Fault
2016-11-11T19:07:56.453Z,1478891276.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:56.539Z,1478891276.539 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T19:07:56.653Z,1478891276.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:56.772Z,1478891276.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:57.016Z,1478891277.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:57.421Z,1478891277.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:57.458Z,1478891277.458 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:07:57.458Z,1478891277.458 [BPC1] No Fault, FailCount= 1
2016-11-11T19:07:57.568Z,1478891277.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:57.865Z,1478891277.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:58.234Z,1478891278.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:58.365Z,1478891278.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:58.621Z,1478891278.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:58.776Z,1478891278.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:59.009Z,1478891279.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:59.409Z,1478891279.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:07:59.572Z,1478891279.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:07:59.809Z,1478891279.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:00.206Z,1478891280.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:00.369Z,1478891280.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:00.613Z,1478891280.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:00.780Z,1478891280.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:01.010Z,1478891281.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:01.407Z,1478891281.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:01.576Z,1478891281.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:01.813Z,1478891281.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:02.211Z,1478891282.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:02.373Z,1478891282.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:02.607Z,1478891282.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:02.627Z,1478891282.627 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T19:08:02.627Z,1478891282.627 [NAL9602] No Fault, FailCount= 5
2016-11-11T19:08:02.784Z,1478891282.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:02.969Z,1478891282.969 [NAL9602](INFO): Powering up NAL9602
2016-11-11T19:08:03.020Z,1478891283.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:03.415Z,1478891283.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:03.580Z,1478891283.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:03.821Z,1478891283.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:04.212Z,1478891284.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:04.377Z,1478891284.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:04.618Z,1478891284.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:04.876Z,1478891284.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:05.017Z,1478891285.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:05.417Z,1478891285.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:05.672Z,1478891285.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:05.817Z,1478891285.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:06.220Z,1478891286.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:06.468Z,1478891286.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:06.617Z,1478891286.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:07.022Z,1478891287.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:07.220Z,1478891287.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:07.425Z,1478891287.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:07.820Z,1478891287.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:08.016Z,1478891288.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:08.213Z,1478891288.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:08.637Z,1478891288.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:08.813Z,1478891288.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:09.029Z,1478891289.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:09.224Z,1478891289.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:09.416Z,1478891289.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:09.810Z,1478891289.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:10.020Z,1478891290.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:10.246Z,1478891290.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:10.616Z,1478891290.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:10.748Z,1478891290.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:11.050Z,1478891291.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:11.426Z,1478891291.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:11.544Z,1478891291.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:11.819Z,1478891291.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:12.210Z,1478891292.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:12.341Z,1478891292.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:12.616Z,1478891292.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:12.764Z,1478891292.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:13.018Z,1478891293.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:13.410Z,1478891293.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:13.560Z,1478891293.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:13.828Z,1478891293.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:14.169Z,1478891294.169 [NAL9602](INFO): NAL9602 initialized
2016-11-11T19:08:14.221Z,1478891294.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:14.357Z,1478891294.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:14.610Z,1478891294.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:14.768Z,1478891294.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:15.028Z,1478891295.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:15.421Z,1478891295.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:15.564Z,1478891295.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:15.823Z,1478891295.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:16.216Z,1478891296.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:16.361Z,1478891296.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:16.617Z,1478891296.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:16.772Z,1478891296.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:17.017Z,1478891297.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:17.427Z,1478891297.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:17.568Z,1478891297.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:17.825Z,1478891297.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:18.217Z,1478891298.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:18.364Z,1478891298.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:18.617Z,1478891298.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:18.844Z,1478891298.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:19.016Z,1478891299.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:19.417Z,1478891299.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:19.640Z,1478891299.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:19.810Z,1478891299.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:20.229Z,1478891300.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:20.436Z,1478891300.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:20.619Z,1478891300.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:21.020Z,1478891301.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:21.196Z,1478891301.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:21.420Z,1478891301.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:21.835Z,1478891301.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:21.992Z,1478891301.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:22.222Z,1478891302.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:22.633Z,1478891302.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:22.789Z,1478891302.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:23.024Z,1478891303.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:23.200Z,1478891303.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:23.453Z,1478891303.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:23.828Z,1478891303.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:23.996Z,1478891303.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:24.201Z,1478891304.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:24.617Z,1478891304.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:24.724Z,1478891304.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:25.004Z,1478891305.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:25.437Z,1478891305.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:25.520Z,1478891305.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:25.817Z,1478891305.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:26.213Z,1478891306.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:26.317Z,1478891306.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:26.617Z,1478891306.617 [BPC1](ERROR): Failed to receive battery data
2016-11-11T19:08:26.618Z,1478891306.618 [BPC1] Communications Fault, FailCount= 1
2016-11-11T19:08:26.618Z,1478891306.618 [BPC1](ERROR): Communications Fault
2016-11-11T19:08:26.626Z,1478891306.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:26.646Z,1478891306.646 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T19:08:26.728Z,1478891306.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:27.031Z,1478891307.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:27.434Z,1478891307.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:27.524Z,1478891307.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:27.835Z,1478891307.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:27.855Z,1478891307.855 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:08:27.855Z,1478891307.855 [BPC1] No Fault, FailCount= 1
2016-11-11T19:08:28.321Z,1478891308.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:28.340Z,1478891308.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:28.630Z,1478891308.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:28.736Z,1478891308.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:29.017Z,1478891309.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:29.410Z,1478891309.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:29.532Z,1478891309.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:29.818Z,1478891309.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:30.213Z,1478891310.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:30.329Z,1478891310.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:30.625Z,1478891310.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:30.740Z,1478891310.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:31.005Z,1478891311.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:31.405Z,1478891311.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:31.536Z,1478891311.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:31.817Z,1478891311.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:32.214Z,1478891312.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:32.332Z,1478891312.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:32.632Z,1478891312.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:32.828Z,1478891312.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:33.035Z,1478891313.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:33.417Z,1478891313.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:33.624Z,1478891313.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:33.809Z,1478891313.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:34.207Z,1478891314.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:34.420Z,1478891314.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:34.611Z,1478891314.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:35.021Z,1478891315.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:35.176Z,1478891315.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:35.417Z,1478891315.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:35.819Z,1478891315.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:35.972Z,1478891315.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:36.220Z,1478891316.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:36.617Z,1478891316.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:36.768Z,1478891316.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:37.017Z,1478891317.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:37.182Z,1478891317.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:37.424Z,1478891317.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:37.829Z,1478891317.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:37.976Z,1478891317.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:38.225Z,1478891318.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:38.625Z,1478891318.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:38.705Z,1478891318.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:39.045Z,1478891319.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:39.417Z,1478891319.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:39.500Z,1478891319.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:39.821Z,1478891319.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:40.221Z,1478891320.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:40.297Z,1478891320.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:40.637Z,1478891320.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:40.712Z,1478891320.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:41.049Z,1478891321.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:41.405Z,1478891321.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:41.508Z,1478891321.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:41.853Z,1478891321.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:42.237Z,1478891322.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:42.305Z,1478891322.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:42.625Z,1478891322.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:42.720Z,1478891322.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:43.016Z,1478891323.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:43.418Z,1478891323.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:43.516Z,1478891323.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:43.816Z,1478891323.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:44.219Z,1478891324.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:44.313Z,1478891324.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:44.625Z,1478891324.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:44.724Z,1478891324.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:45.020Z,1478891325.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:45.421Z,1478891325.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:45.520Z,1478891325.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:45.813Z,1478891325.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:46.226Z,1478891326.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:46.316Z,1478891326.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:46.637Z,1478891326.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:46.804Z,1478891326.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:47.024Z,1478891327.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:47.409Z,1478891327.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:47.600Z,1478891327.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:47.813Z,1478891327.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:48.210Z,1478891328.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:48.396Z,1478891328.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:49.168Z,1478891329.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:49.964Z,1478891329.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:50.761Z,1478891330.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:51.172Z,1478891331.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:51.672Z,1478891331.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:51.817Z,1478891331.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:51.968Z,1478891331.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:52.170Z,1478891332.170 [BPC1](ERROR): Failed to parse message.
2016-11-11T19:08:52.170Z,1478891332.170 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T19:08:52.170Z,1478891332.170 [BPC1] Data Fault, FailCount= 1
2016-11-11T19:08:52.170Z,1478891332.170 [BPC1](ERROR): Data Fault
2016-11-11T19:08:52.179Z,1478891332.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:52.277Z,1478891332.277 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T19:08:52.588Z,1478891332.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:52.700Z,1478891332.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:53.037Z,1478891333.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:53.400Z,1478891333.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:53.421Z,1478891333.421 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:08:53.421Z,1478891333.421 [BPC1] No Fault, FailCount= 1
2016-11-11T19:08:53.496Z,1478891333.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:53.839Z,1478891333.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:54.209Z,1478891334.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:54.293Z,1478891334.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:54.581Z,1478891334.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:54.704Z,1478891334.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:55.014Z,1478891335.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:55.379Z,1478891335.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:55.501Z,1478891335.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:55.785Z,1478891335.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:56.187Z,1478891336.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:56.297Z,1478891336.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:56.592Z,1478891336.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:56.708Z,1478891336.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:57.028Z,1478891337.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:57.377Z,1478891337.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:57.504Z,1478891337.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:57.780Z,1478891337.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:58.189Z,1478891338.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:58.300Z,1478891338.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:58.621Z,1478891338.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:58.708Z,1478891338.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:58.982Z,1478891338.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:59.381Z,1478891339.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:08:59.506Z,1478891339.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:08:59.793Z,1478891339.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:00.186Z,1478891340.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:00.300Z,1478891340.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:00.596Z,1478891340.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:00.784Z,1478891340.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:00.998Z,1478891340.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:01.384Z,1478891341.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:01.580Z,1478891341.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:01.789Z,1478891341.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:02.181Z,1478891342.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:02.376Z,1478891342.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:02.588Z,1478891342.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:02.989Z,1478891342.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:03.132Z,1478891343.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:03.389Z,1478891343.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:03.788Z,1478891343.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:03.928Z,1478891343.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:04.189Z,1478891344.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:04.589Z,1478891344.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:04.725Z,1478891344.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:04.993Z,1478891344.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:05.136Z,1478891345.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:05.417Z,1478891345.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:05.805Z,1478891345.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:05.932Z,1478891345.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:06.192Z,1478891346.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:06.629Z,1478891346.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:06.677Z,1478891346.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:06.980Z,1478891346.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:07.376Z,1478891347.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:07.472Z,1478891347.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:07.802Z,1478891347.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:08.184Z,1478891348.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:08.269Z,1478891348.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:08.601Z,1478891348.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:08.680Z,1478891348.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:09.001Z,1478891349.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:09.389Z,1478891349.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:09.476Z,1478891349.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:09.834Z,1478891349.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:10.206Z,1478891350.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:10.273Z,1478891350.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:10.583Z,1478891350.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:10.688Z,1478891350.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:10.986Z,1478891350.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:11.401Z,1478891351.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:11.484Z,1478891351.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:11.778Z,1478891351.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:12.184Z,1478891352.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:12.280Z,1478891352.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:12.593Z,1478891352.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:12.688Z,1478891352.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:12.993Z,1478891352.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:13.432Z,1478891353.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:13.484Z,1478891353.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:13.769Z,1478891353.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:14.197Z,1478891354.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:14.280Z,1478891354.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:14.596Z,1478891354.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:14.752Z,1478891354.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:15.043Z,1478891355.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:15.398Z,1478891355.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:15.548Z,1478891355.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:15.777Z,1478891355.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:16.189Z,1478891356.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:16.346Z,1478891356.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:16.589Z,1478891356.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:16.984Z,1478891356.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:17.112Z,1478891357.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:17.389Z,1478891357.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:17.785Z,1478891357.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:17.910Z,1478891357.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:18.184Z,1478891358.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:18.585Z,1478891358.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:18.705Z,1478891358.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:18.992Z,1478891358.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:19.124Z,1478891359.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:19.386Z,1478891359.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:19.809Z,1478891359.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:19.920Z,1478891359.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:20.189Z,1478891360.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:20.589Z,1478891360.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:20.652Z,1478891360.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:21.009Z,1478891361.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:21.377Z,1478891361.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:21.449Z,1478891361.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:21.781Z,1478891361.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:22.245Z,1478891362.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:22.262Z,1478891362.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:22.585Z,1478891362.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:22.660Z,1478891362.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:23.018Z,1478891363.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:23.419Z,1478891363.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:23.419Z,1478891363.419 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 266
2016-11-11T19:09:23.419Z,1478891363.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:09:23.426Z,1478891363.425 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:23.426Z,1478891363.426 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 266
2016-11-11T19:09:23.426Z,1478891363.426 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:09:23.428Z,1478891363.428 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:23.428Z,1478891363.428 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 266
2016-11-11T19:09:23.428Z,1478891363.428 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:09:23.446Z,1478891363.446 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:09:23.447Z,1478891363.447 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:09:23.447Z,1478891363.447 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:09:23.464Z,1478891363.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:23.814Z,1478891363.814 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:09:23.814Z,1478891363.814 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 266
2016-11-11T19:09:23.815Z,1478891363.815 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:09:23.815Z,1478891363.815 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 266
2016-11-11T19:09:23.817Z,1478891363.816 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:09:23.817Z,1478891363.817 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 266
2016-11-11T19:09:24.208Z,1478891364.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:09:24.209Z,1478891364.209 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:09:24.209Z,1478891364.209 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:09:24.235Z,1478891364.236 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:09:24.236Z,1478891364.236 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:09:24.237Z,1478891364.237 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:09:24.237Z,1478891364.237 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:09:24.238Z,1478891364.238 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:09:24.239Z,1478891364.239 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:09:24.260Z,1478891364.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:24.577Z,1478891364.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:24.668Z,1478891364.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:24.985Z,1478891364.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:25.377Z,1478891365.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:25.464Z,1478891365.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:25.781Z,1478891365.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:26.260Z,1478891366.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:26.288Z,1478891366.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:26.597Z,1478891366.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:26.668Z,1478891366.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:26.980Z,1478891366.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:27.384Z,1478891367.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:27.464Z,1478891367.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:27.789Z,1478891367.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:28.197Z,1478891368.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:28.260Z,1478891368.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:28.578Z,1478891368.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:28.732Z,1478891368.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:28.985Z,1478891368.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:29.389Z,1478891369.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:29.528Z,1478891369.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:29.793Z,1478891369.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:30.216Z,1478891370.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:30.325Z,1478891370.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:30.573Z,1478891370.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:30.997Z,1478891370.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:31.100Z,1478891371.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:31.401Z,1478891371.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:31.854Z,1478891371.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:31.896Z,1478891371.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:32.201Z,1478891372.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:32.576Z,1478891372.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:32.692Z,1478891372.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:32.981Z,1478891372.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:33.104Z,1478891373.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:33.384Z,1478891373.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:33.781Z,1478891373.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:33.900Z,1478891373.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:34.237Z,1478891374.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:34.615Z,1478891374.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:34.632Z,1478891374.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:34.984Z,1478891374.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:35.424Z,1478891375.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:35.428Z,1478891375.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:35.789Z,1478891375.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:36.225Z,1478891376.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:36.295Z,1478891376.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:36.609Z,1478891376.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:36.636Z,1478891376.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:37.038Z,1478891377.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:37.418Z,1478891377.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:37.432Z,1478891377.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:37.773Z,1478891377.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:38.208Z,1478891378.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:38.229Z,1478891378.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:38.575Z,1478891378.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:38.640Z,1478891378.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:38.976Z,1478891378.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:39.387Z,1478891379.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:39.436Z,1478891379.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:39.776Z,1478891379.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:40.233Z,1478891380.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:40.245Z,1478891380.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:40.594Z,1478891380.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:40.644Z,1478891380.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:40.995Z,1478891380.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:41.389Z,1478891381.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:41.440Z,1478891381.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:41.787Z,1478891381.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:42.189Z,1478891382.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:42.236Z,1478891382.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:42.589Z,1478891382.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:42.720Z,1478891382.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:43.031Z,1478891383.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:43.389Z,1478891383.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:43.516Z,1478891383.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:43.792Z,1478891383.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:44.189Z,1478891384.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:44.314Z,1478891384.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:44.581Z,1478891384.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:45.001Z,1478891385.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:45.072Z,1478891385.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:45.380Z,1478891385.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:45.789Z,1478891385.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:45.868Z,1478891385.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:46.194Z,1478891386.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:46.597Z,1478891386.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:46.664Z,1478891386.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:47.027Z,1478891387.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:47.076Z,1478891387.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:47.399Z,1478891387.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:47.821Z,1478891387.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:47.872Z,1478891387.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:48.244Z,1478891388.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:48.628Z,1478891388.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:48.638Z,1478891388.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:49.424Z,1478891389.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:50.220Z,1478891390.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:50.628Z,1478891390.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:51.424Z,1478891391.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:51.997Z,1478891391.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:52.121Z,1478891392.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:52.220Z,1478891392.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:52.497Z,1478891392.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:52.628Z,1478891392.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:52.901Z,1478891392.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:53.295Z,1478891393.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:53.424Z,1478891393.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:53.736Z,1478891393.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:54.109Z,1478891394.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:54.220Z,1478891394.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:54.530Z,1478891394.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:54.628Z,1478891394.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:54.904Z,1478891394.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:55.321Z,1478891395.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:55.424Z,1478891395.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:55.713Z,1478891395.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:56.093Z,1478891396.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:56.220Z,1478891396.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:56.516Z,1478891396.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:56.894Z,1478891396.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:57.016Z,1478891397.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:57.295Z,1478891397.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:57.700Z,1478891397.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:57.812Z,1478891397.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:58.105Z,1478891398.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:58.509Z,1478891398.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:58.636Z,1478891398.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:58.906Z,1478891398.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:59.060Z,1478891399.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:09:59.298Z,1478891399.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:59.697Z,1478891399.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:09:59.856Z,1478891399.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:00.109Z,1478891400.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:00.508Z,1478891400.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:00.653Z,1478891400.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:00.908Z,1478891400.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:01.064Z,1478891401.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:01.308Z,1478891401.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:01.707Z,1478891401.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:01.860Z,1478891401.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:02.108Z,1478891402.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:02.488Z,1478891402.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:02.596Z,1478891402.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:02.892Z,1478891402.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:03.301Z,1478891403.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:03.392Z,1478891403.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:03.699Z,1478891403.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:04.105Z,1478891404.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:04.191Z,1478891404.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:04.500Z,1478891404.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:04.604Z,1478891404.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:04.895Z,1478891404.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:05.295Z,1478891405.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:05.401Z,1478891405.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:05.700Z,1478891405.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:06.146Z,1478891406.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:06.196Z,1478891406.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:06.508Z,1478891406.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:06.604Z,1478891406.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:06.930Z,1478891406.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:07.318Z,1478891407.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:07.400Z,1478891407.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:07.725Z,1478891407.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:08.088Z,1478891408.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:08.196Z,1478891408.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:08.543Z,1478891408.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:08.604Z,1478891408.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:08.936Z,1478891408.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:09.296Z,1478891409.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:09.400Z,1478891409.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:09.708Z,1478891409.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:10.096Z,1478891410.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:10.196Z,1478891410.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:10.509Z,1478891410.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:10.692Z,1478891410.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:10.905Z,1478891410.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:11.298Z,1478891411.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:11.488Z,1478891411.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:11.708Z,1478891411.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:12.101Z,1478891412.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:12.284Z,1478891412.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:12.496Z,1478891412.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:12.888Z,1478891412.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:13.028Z,1478891413.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:13.293Z,1478891413.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:13.694Z,1478891413.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:13.824Z,1478891413.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:14.095Z,1478891414.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:14.501Z,1478891414.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:14.621Z,1478891414.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:14.895Z,1478891414.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:15.032Z,1478891415.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:15.296Z,1478891415.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:15.713Z,1478891415.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:15.828Z,1478891415.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:16.106Z,1478891416.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:16.509Z,1478891416.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:16.584Z,1478891416.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:16.905Z,1478891416.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:17.301Z,1478891417.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:17.380Z,1478891417.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:17.696Z,1478891417.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:18.100Z,1478891418.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:18.176Z,1478891418.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:18.498Z,1478891418.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:18.584Z,1478891418.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:18.901Z,1478891418.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:19.306Z,1478891419.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:19.380Z,1478891419.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:19.708Z,1478891419.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:20.126Z,1478891420.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:20.176Z,1478891420.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:20.517Z,1478891420.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:20.588Z,1478891420.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:20.946Z,1478891420.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:21.309Z,1478891421.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:21.384Z,1478891421.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:21.705Z,1478891421.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:22.095Z,1478891422.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:22.180Z,1478891422.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:22.506Z,1478891422.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:22.588Z,1478891422.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:22.905Z,1478891422.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:23.298Z,1478891423.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:23.384Z,1478891423.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:23.697Z,1478891423.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:24.082Z,1478891424.082 [BPC1](ERROR): Failed to receive battery data
2016-11-11T19:10:24.082Z,1478891424.082 [BPC1] Communications Fault, FailCount= 1
2016-11-11T19:10:24.082Z,1478891424.082 [BPC1](ERROR): Communications Fault
2016-11-11T19:10:24.109Z,1478891424.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:24.158Z,1478891424.158 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T19:10:24.180Z,1478891424.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:24.521Z,1478891424.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:24.648Z,1478891424.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:24.919Z,1478891424.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:25.301Z,1478891425.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:25.360Z,1478891425.360 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:10:25.361Z,1478891425.361 [BPC1] No Fault, FailCount= 1
2016-11-11T19:10:25.444Z,1478891425.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:25.771Z,1478891425.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:26.134Z,1478891426.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:26.240Z,1478891426.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:26.495Z,1478891426.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:26.904Z,1478891426.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:27.004Z,1478891427.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:27.304Z,1478891427.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:27.702Z,1478891427.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:27.800Z,1478891427.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:28.104Z,1478891428.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:28.508Z,1478891428.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:28.596Z,1478891428.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:28.913Z,1478891428.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:29.008Z,1478891429.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:29.293Z,1478891429.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:29.695Z,1478891429.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:29.804Z,1478891429.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:30.164Z,1478891430.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:30.496Z,1478891430.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:30.556Z,1478891430.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:30.902Z,1478891430.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:31.305Z,1478891431.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:31.352Z,1478891431.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:31.704Z,1478891431.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:32.144Z,1478891432.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:32.148Z,1478891432.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:32.504Z,1478891432.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:32.556Z,1478891432.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:32.910Z,1478891432.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:33.308Z,1478891433.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:33.352Z,1478891433.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:33.709Z,1478891433.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:34.148Z,1478891434.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:34.157Z,1478891434.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:34.497Z,1478891434.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:34.556Z,1478891434.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:34.897Z,1478891434.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:35.296Z,1478891435.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:35.352Z,1478891435.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:35.701Z,1478891435.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:36.148Z,1478891436.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:36.175Z,1478891436.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:36.506Z,1478891436.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:36.556Z,1478891436.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:36.909Z,1478891436.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:37.325Z,1478891437.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:37.352Z,1478891437.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:37.717Z,1478891437.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:38.148Z,1478891438.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:38.166Z,1478891438.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:38.492Z,1478891438.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:38.616Z,1478891438.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:38.936Z,1478891438.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:39.295Z,1478891439.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:39.413Z,1478891439.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:39.734Z,1478891439.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:40.141Z,1478891440.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:40.208Z,1478891440.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:40.495Z,1478891440.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:40.909Z,1478891440.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:41.004Z,1478891441.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:41.308Z,1478891441.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:41.715Z,1478891441.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:41.800Z,1478891441.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:42.122Z,1478891442.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:42.520Z,1478891442.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:42.597Z,1478891442.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:42.905Z,1478891442.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:43.004Z,1478891443.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:43.295Z,1478891443.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:43.705Z,1478891443.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:43.800Z,1478891443.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:44.142Z,1478891444.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:44.501Z,1478891444.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:44.532Z,1478891444.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:44.900Z,1478891444.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:45.299Z,1478891445.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:45.328Z,1478891445.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:45.708Z,1478891445.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:46.124Z,1478891446.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:46.166Z,1478891446.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:46.529Z,1478891446.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:46.540Z,1478891446.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:46.903Z,1478891446.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:47.303Z,1478891447.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:47.329Z,1478891447.329 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T19:05:46.9Z
2016-11-11T19:10:47.329Z,1478891447.329 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T19:10:47.329Z,1478891447.329 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T19:10:47.336Z,1478891447.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:47.710Z,1478891447.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:48.134Z,1478891448.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:48.544Z,1478891448.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:48.644Z,1478891448.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:48.774Z,1478891448.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:49.340Z,1478891449.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:50.136Z,1478891450.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:50.544Z,1478891450.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:51.340Z,1478891451.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:52.136Z,1478891452.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:52.445Z,1478891452.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:52.484Z,1478891452.484 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20161111T044527/Courier0332.lzma
2016-11-11T19:10:52.582Z,1478891452.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:52.608Z,1478891452.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:52.994Z,1478891452.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:53.287Z,1478891453.287 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0332.lzma.bak
2016-11-11T19:10:53.287Z,1478891453.287 [DataOverHttps](INFO): SBD MOMSN=4555679
2016-11-11T19:10:53.358Z,1478891453.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:53.404Z,1478891453.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:54.200Z,1478891454.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:54.832Z,1478891454.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:54.951Z,1478891454.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:54.960Z,1478891454.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:55.756Z,1478891455.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:56.552Z,1478891456.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:56.964Z,1478891456.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:57.760Z,1478891457.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:58.378Z,1478891458.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:58.477Z,1478891458.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:58.535Z,1478891458.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:58.909Z,1478891458.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:59.273Z,1478891459.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:10:59.301Z,1478891459.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:10:59.678Z,1478891459.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:00.068Z,1478891460.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:00.137Z,1478891460.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:00.480Z,1478891460.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:01.276Z,1478891461.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:02.073Z,1478891462.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:02.492Z,1478891462.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:03.288Z,1478891463.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:03.563Z,1478891463.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:04.085Z,1478891464.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:04.492Z,1478891464.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:05.288Z,1478891465.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:06.084Z,1478891466.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:06.881Z,1478891466.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:07.676Z,1478891467.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:08.472Z,1478891468.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:09.268Z,1478891469.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:10.064Z,1478891470.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:10.860Z,1478891470.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:11.656Z,1478891471.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:12.452Z,1478891472.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:13.248Z,1478891473.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:14.045Z,1478891474.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:14.840Z,1478891474.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:15.637Z,1478891475.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:16.432Z,1478891476.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:17.228Z,1478891477.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:18.024Z,1478891478.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:18.820Z,1478891478.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:19.616Z,1478891479.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:20.412Z,1478891480.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:20.837Z,1478891480.837 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20161111T044527/Express0333.lzma
2016-11-11T19:11:20.911Z,1478891480.911 [BPC1](ERROR): Failed to receive battery data
2016-11-11T19:11:20.911Z,1478891480.911 [BPC1] Communications Fault, FailCount= 1
2016-11-11T19:11:20.911Z,1478891480.911 [BPC1](ERROR): Communications Fault
2016-11-11T19:11:20.940Z,1478891480.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:20.965Z,1478891480.964 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T19:11:21.049Z,1478891481.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:21.208Z,1478891481.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:21.702Z,1478891481.702 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0333.lzma.bak
2016-11-11T19:11:21.702Z,1478891481.702 [DataOverHttps](INFO): SBD MOMSN=4555682
2016-11-11T19:11:21.886Z,1478891481.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:22.004Z,1478891482.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:22.412Z,1478891482.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:22.820Z,1478891482.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:23.228Z,1478891483.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:23.496Z,1478891483.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:23.506Z,1478891483.506 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T19:11:23.506Z,1478891483.506 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T19:11:23.506Z,1478891483.506 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T19:11:23.517Z,1478891483.517 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:11:23.517Z,1478891483.517 [BPC1] No Fault, FailCount= 1
2016-11-11T19:11:23.644Z,1478891483.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:23.713Z,1478891483.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:24.052Z,1478891484.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:24.465Z,1478891484.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:24.876Z,1478891484.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:25.284Z,1478891485.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:25.696Z,1478891485.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:26.104Z,1478891486.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:26.512Z,1478891486.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:27.225Z,1478891487.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:27.308Z,1478891487.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:27.342Z,1478891487.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:27.737Z,1478891487.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:28.104Z,1478891488.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:28.148Z,1478891488.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:28.512Z,1478891488.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:28.536Z,1478891488.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:28.951Z,1478891488.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:29.308Z,1478891489.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:29.348Z,1478891489.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:29.733Z,1478891489.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:30.104Z,1478891490.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:30.155Z,1478891490.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:30.512Z,1478891490.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:30.541Z,1478891490.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:30.934Z,1478891490.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:31.309Z,1478891491.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:31.344Z,1478891491.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:31.743Z,1478891491.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:32.104Z,1478891492.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:32.154Z,1478891492.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:32.512Z,1478891492.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:32.540Z,1478891492.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:32.942Z,1478891492.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:33.308Z,1478891493.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:33.353Z,1478891493.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:33.751Z,1478891493.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:34.105Z,1478891494.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:34.190Z,1478891494.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:34.529Z,1478891494.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:34.552Z,1478891494.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:34.929Z,1478891494.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:35.333Z,1478891495.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:35.352Z,1478891495.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:35.736Z,1478891495.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:36.130Z,1478891496.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:36.148Z,1478891496.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:36.553Z,1478891496.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:36.868Z,1478891496.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:36.945Z,1478891496.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:37.348Z,1478891497.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:37.665Z,1478891497.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:37.779Z,1478891497.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:38.134Z,1478891498.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:38.461Z,1478891498.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:38.560Z,1478891498.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:38.872Z,1478891498.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:38.981Z,1478891498.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:39.393Z,1478891499.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:39.668Z,1478891499.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:39.745Z,1478891499.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:40.161Z,1478891500.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:40.404Z,1478891500.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:40.541Z,1478891500.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:40.981Z,1478891500.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:41.200Z,1478891501.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:41.387Z,1478891501.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:41.746Z,1478891501.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:41.996Z,1478891501.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:42.147Z,1478891502.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:42.408Z,1478891502.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:42.553Z,1478891502.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:42.950Z,1478891502.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:43.204Z,1478891503.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:43.349Z,1478891503.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:43.729Z,1478891503.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:44.001Z,1478891504.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:44.153Z,1478891504.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:44.416Z,1478891504.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:44.532Z,1478891504.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:44.933Z,1478891504.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:45.212Z,1478891505.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:45.332Z,1478891505.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:45.740Z,1478891505.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:46.009Z,1478891506.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:46.145Z,1478891506.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:46.420Z,1478891506.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:46.533Z,1478891506.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:46.936Z,1478891506.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:47.216Z,1478891507.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:47.337Z,1478891507.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:47.733Z,1478891507.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:48.013Z,1478891508.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:48.172Z,1478891508.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:48.540Z,1478891508.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:48.586Z,1478891508.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:48.965Z,1478891508.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:49.336Z,1478891509.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:49.356Z,1478891509.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:49.776Z,1478891509.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:50.132Z,1478891510.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:50.150Z,1478891510.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:50.554Z,1478891510.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:50.856Z,1478891510.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:50.947Z,1478891510.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:51.364Z,1478891511.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:51.652Z,1478891511.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:51.762Z,1478891511.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:52.149Z,1478891512.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:52.449Z,1478891512.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:52.556Z,1478891512.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:52.860Z,1478891512.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:52.920Z,1478891512.920 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T19:11:52.920Z,1478891512.920 [BPC1] Data Fault, FailCount= 1
2016-11-11T19:11:52.920Z,1478891512.920 [BPC1](ERROR): Data Fault
2016-11-11T19:11:52.965Z,1478891512.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:53.031Z,1478891513.031 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T19:11:53.360Z,1478891513.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:53.656Z,1478891513.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:53.754Z,1478891513.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:54.157Z,1478891514.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:54.215Z,1478891514.215 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:11:54.215Z,1478891514.215 [BPC1] No Fault, FailCount= 1
2016-11-11T19:11:54.376Z,1478891514.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:54.649Z,1478891514.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:54.987Z,1478891514.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:55.173Z,1478891515.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:55.354Z,1478891515.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:55.762Z,1478891515.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:55.969Z,1478891515.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:56.143Z,1478891516.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:56.385Z,1478891516.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:56.554Z,1478891516.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:56.944Z,1478891516.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:57.180Z,1478891517.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:57.360Z,1478891517.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:57.797Z,1478891517.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:57.977Z,1478891517.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:58.149Z,1478891518.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:58.396Z,1478891518.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:58.546Z,1478891518.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:58.977Z,1478891518.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:59.194Z,1478891519.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:11:59.349Z,1478891519.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:59.745Z,1478891519.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:11:59.989Z,1478891519.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:00.129Z,1478891520.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:00.529Z,1478891520.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:00.785Z,1478891520.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:00.965Z,1478891520.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:01.335Z,1478891521.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:01.580Z,1478891521.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:01.729Z,1478891521.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:02.130Z,1478891522.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:02.376Z,1478891522.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:02.529Z,1478891522.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:02.949Z,1478891522.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:03.172Z,1478891523.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:03.339Z,1478891523.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:03.729Z,1478891523.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:03.968Z,1478891523.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:04.129Z,1478891524.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:04.529Z,1478891524.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:04.764Z,1478891524.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:04.928Z,1478891524.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:05.329Z,1478891525.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:05.560Z,1478891525.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:05.729Z,1478891525.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:06.129Z,1478891526.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:06.356Z,1478891526.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:06.529Z,1478891526.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:06.957Z,1478891526.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:07.152Z,1478891527.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:07.349Z,1478891527.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:07.728Z,1478891527.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:07.948Z,1478891527.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:08.130Z,1478891528.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:08.561Z,1478891528.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:08.744Z,1478891528.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:08.967Z,1478891528.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:09.361Z,1478891529.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:09.540Z,1478891529.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:09.729Z,1478891529.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:10.157Z,1478891530.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:10.336Z,1478891530.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:10.530Z,1478891530.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:10.929Z,1478891530.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:11.132Z,1478891531.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:11.329Z,1478891531.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:11.739Z,1478891531.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:11.930Z,1478891531.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:12.156Z,1478891532.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:12.524Z,1478891532.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:12.724Z,1478891532.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:12.929Z,1478891532.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:13.329Z,1478891533.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:13.520Z,1478891533.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:13.728Z,1478891533.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:14.129Z,1478891534.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:14.316Z,1478891534.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:14.529Z,1478891534.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:14.979Z,1478891534.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:15.112Z,1478891535.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:15.330Z,1478891535.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:15.752Z,1478891535.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:15.908Z,1478891535.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:16.145Z,1478891536.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:16.530Z,1478891536.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:16.704Z,1478891536.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:16.929Z,1478891536.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:17.337Z,1478891537.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:17.500Z,1478891537.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:17.729Z,1478891537.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:18.130Z,1478891538.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:18.296Z,1478891538.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:18.532Z,1478891538.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:18.929Z,1478891538.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:19.092Z,1478891539.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:19.329Z,1478891539.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:19.741Z,1478891539.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:19.888Z,1478891539.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:20.154Z,1478891540.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:20.296Z,1478891540.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:20.531Z,1478891540.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:20.704Z,1478891540.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:20.926Z,1478891540.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:21.112Z,1478891541.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:21.346Z,1478891541.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:21.520Z,1478891541.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:21.753Z,1478891541.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:21.929Z,1478891541.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:22.185Z,1478891542.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:22.340Z,1478891542.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:22.546Z,1478891542.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:22.748Z,1478891542.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:22.953Z,1478891542.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:23.156Z,1478891543.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:23.345Z,1478891543.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:23.564Z,1478891543.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:23.758Z,1478891543.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:23.972Z,1478891543.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:24.178Z,1478891544.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:24.380Z,1478891544.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:24.788Z,1478891544.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:25.196Z,1478891545.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:25.992Z,1478891545.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:26.400Z,1478891546.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:27.196Z,1478891547.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:27.992Z,1478891547.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:28.400Z,1478891548.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:29.196Z,1478891549.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:29.993Z,1478891549.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:30.448Z,1478891550.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:31.244Z,1478891551.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:32.040Z,1478891552.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:32.796Z,1478891552.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:33.592Z,1478891553.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:34.046Z,1478891554.046 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:34.047Z,1478891554.047 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 267
2016-11-11T19:12:34.047Z,1478891554.047 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:12:34.058Z,1478891554.058 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:34.058Z,1478891554.058 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 267
2016-11-11T19:12:34.058Z,1478891554.058 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:12:34.068Z,1478891554.068 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:34.069Z,1478891554.069 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 267
2016-11-11T19:12:34.069Z,1478891554.069 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:12:34.136Z,1478891554.136 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:12:34.136Z,1478891554.136 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:12:34.136Z,1478891554.136 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:12:34.401Z,1478891554.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:34.428Z,1478891554.428 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:12:34.429Z,1478891554.429 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 267
2016-11-11T19:12:34.429Z,1478891554.429 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:12:34.429Z,1478891554.429 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 267
2016-11-11T19:12:34.430Z,1478891554.430 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:12:34.430Z,1478891554.430 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 267
2016-11-11T19:12:34.624Z,1478891554.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:12:34.624Z,1478891554.624 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:12:34.625Z,1478891554.625 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:12:34.629Z,1478891554.629 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:12:34.630Z,1478891554.630 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:12:34.630Z,1478891554.630 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:12:34.631Z,1478891554.631 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:12:34.631Z,1478891554.631 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:12:34.631Z,1478891554.631 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:12:34.808Z,1478891554.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:35.018Z,1478891555.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:35.410Z,1478891555.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:35.605Z,1478891555.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:35.936Z,1478891555.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:36.206Z,1478891556.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:36.308Z,1478891556.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:36.604Z,1478891556.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:37.017Z,1478891557.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:37.104Z,1478891557.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:37.416Z,1478891557.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:37.822Z,1478891557.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:37.901Z,1478891557.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:38.229Z,1478891558.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:38.332Z,1478891558.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:38.623Z,1478891558.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:39.022Z,1478891559.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:39.129Z,1478891559.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:39.413Z,1478891559.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:39.809Z,1478891559.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:39.924Z,1478891559.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:40.225Z,1478891560.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:40.336Z,1478891560.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:40.622Z,1478891560.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:41.022Z,1478891561.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:41.132Z,1478891561.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:41.406Z,1478891561.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:41.805Z,1478891561.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:41.928Z,1478891561.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:42.222Z,1478891562.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:42.336Z,1478891562.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:42.606Z,1478891562.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:43.005Z,1478891563.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:43.132Z,1478891563.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:43.458Z,1478891563.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:43.793Z,1478891563.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:43.928Z,1478891563.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:44.222Z,1478891564.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:44.404Z,1478891564.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:44.601Z,1478891564.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:44.993Z,1478891564.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:45.200Z,1478891565.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:45.441Z,1478891565.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:45.805Z,1478891565.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:45.996Z,1478891565.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:46.203Z,1478891566.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:46.609Z,1478891566.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:46.756Z,1478891566.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:46.996Z,1478891566.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:47.405Z,1478891567.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:47.552Z,1478891567.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:47.783Z,1478891567.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:48.186Z,1478891568.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:48.349Z,1478891568.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:48.590Z,1478891568.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:48.760Z,1478891568.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:49.015Z,1478891569.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:49.426Z,1478891569.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:49.558Z,1478891569.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:49.817Z,1478891569.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:50.205Z,1478891570.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:50.312Z,1478891570.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:50.622Z,1478891570.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:51.037Z,1478891571.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:51.108Z,1478891571.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:51.405Z,1478891571.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:51.817Z,1478891571.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:51.905Z,1478891571.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:52.213Z,1478891572.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:52.316Z,1478891572.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:52.621Z,1478891572.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:53.023Z,1478891573.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:53.112Z,1478891573.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:53.394Z,1478891573.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:53.797Z,1478891573.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:53.908Z,1478891573.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:54.201Z,1478891574.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:54.316Z,1478891574.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:54.609Z,1478891574.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:55.009Z,1478891575.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:55.112Z,1478891575.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:55.402Z,1478891575.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:55.799Z,1478891575.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:55.908Z,1478891575.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:56.210Z,1478891576.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:56.316Z,1478891576.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:56.590Z,1478891576.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:56.990Z,1478891576.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:57.112Z,1478891577.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:57.392Z,1478891577.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:57.791Z,1478891577.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:57.908Z,1478891577.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:58.201Z,1478891578.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:58.388Z,1478891578.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:58.604Z,1478891578.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:59.005Z,1478891579.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:59.184Z,1478891579.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:12:59.405Z,1478891579.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:59.801Z,1478891579.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:12:59.980Z,1478891579.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:00.202Z,1478891580.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:00.603Z,1478891580.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:00.744Z,1478891580.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:00.994Z,1478891580.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:01.382Z,1478891581.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:01.541Z,1478891581.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:01.790Z,1478891581.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:02.221Z,1478891582.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:02.336Z,1478891582.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:02.614Z,1478891582.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:02.752Z,1478891582.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:03.006Z,1478891583.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:03.413Z,1478891583.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:03.548Z,1478891583.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:03.817Z,1478891583.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:04.205Z,1478891584.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:04.284Z,1478891584.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:04.597Z,1478891584.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:05.037Z,1478891585.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:05.080Z,1478891585.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:05.425Z,1478891585.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:05.856Z,1478891585.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:05.882Z,1478891585.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:06.226Z,1478891586.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:06.292Z,1478891586.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:06.610Z,1478891586.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:07.029Z,1478891587.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:07.088Z,1478891587.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:07.459Z,1478891587.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:07.797Z,1478891587.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:07.885Z,1478891587.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:08.220Z,1478891588.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:08.292Z,1478891588.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:08.618Z,1478891588.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:09.009Z,1478891589.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:09.088Z,1478891589.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:09.411Z,1478891589.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:09.828Z,1478891589.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:09.884Z,1478891589.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:10.193Z,1478891590.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:10.296Z,1478891590.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:10.595Z,1478891590.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:10.992Z,1478891590.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:11.092Z,1478891591.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:11.397Z,1478891591.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:11.796Z,1478891591.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:11.888Z,1478891591.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:12.201Z,1478891592.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:12.368Z,1478891592.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:12.602Z,1478891592.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:13.005Z,1478891593.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:13.164Z,1478891593.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:13.414Z,1478891593.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:13.813Z,1478891593.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:13.960Z,1478891593.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:14.208Z,1478891594.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:14.615Z,1478891594.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:14.720Z,1478891594.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:14.993Z,1478891594.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:15.393Z,1478891595.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:15.516Z,1478891595.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:15.794Z,1478891595.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:16.197Z,1478891596.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:16.313Z,1478891596.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:16.598Z,1478891596.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:16.728Z,1478891596.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:16.993Z,1478891596.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:17.357Z,1478891597.357 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T19:13:17.407Z,1478891597.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:17.524Z,1478891597.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:17.816Z,1478891597.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:18.206Z,1478891598.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:18.260Z,1478891598.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:18.625Z,1478891598.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:19.018Z,1478891599.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:19.056Z,1478891599.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:19.456Z,1478891599.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:19.791Z,1478891599.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:19.854Z,1478891599.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:20.205Z,1478891600.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:20.264Z,1478891600.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:20.625Z,1478891600.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:21.007Z,1478891601.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:21.060Z,1478891601.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:21.426Z,1478891601.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:21.856Z,1478891601.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:21.862Z,1478891601.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:22.242Z,1478891602.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:22.276Z,1478891602.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:22.601Z,1478891602.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:22.948Z,1478891602.948 [NAL9602](INFO): Powering down
2016-11-11T19:13:23.021Z,1478891603.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:23.072Z,1478891603.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:23.409Z,1478891603.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:23.868Z,1478891603.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:23.882Z,1478891603.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:24.217Z,1478891604.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:24.276Z,1478891604.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:25.072Z,1478891605.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:25.868Z,1478891605.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:26.332Z,1478891606.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:27.128Z,1478891607.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:27.564Z,1478891607.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:27.674Z,1478891607.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:27.924Z,1478891607.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:28.050Z,1478891608.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:28.456Z,1478891608.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:28.692Z,1478891608.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:28.850Z,1478891608.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:29.257Z,1478891609.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:29.488Z,1478891609.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:29.652Z,1478891609.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:30.059Z,1478891610.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:30.285Z,1478891610.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:30.455Z,1478891610.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:30.696Z,1478891610.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:30.853Z,1478891610.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:31.252Z,1478891611.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:31.492Z,1478891611.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:31.657Z,1478891611.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:32.067Z,1478891612.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:32.220Z,1478891612.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:32.468Z,1478891612.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:32.872Z,1478891612.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:33.016Z,1478891613.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:33.265Z,1478891613.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:33.657Z,1478891613.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:33.813Z,1478891613.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:34.090Z,1478891614.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:34.224Z,1478891614.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:34.460Z,1478891614.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:34.892Z,1478891614.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:35.020Z,1478891615.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:35.257Z,1478891615.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:35.690Z,1478891615.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:35.825Z,1478891615.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:36.101Z,1478891616.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:36.248Z,1478891616.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:36.457Z,1478891616.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:36.865Z,1478891616.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:37.044Z,1478891617.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:37.253Z,1478891617.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:37.654Z,1478891617.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:37.840Z,1478891617.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:38.053Z,1478891618.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:38.248Z,1478891618.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:38.461Z,1478891618.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:38.865Z,1478891618.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:39.044Z,1478891619.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:39.253Z,1478891619.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:39.669Z,1478891619.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:39.840Z,1478891619.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:40.058Z,1478891620.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:40.316Z,1478891620.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:40.454Z,1478891620.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:40.860Z,1478891620.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:41.112Z,1478891621.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:41.253Z,1478891621.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:41.654Z,1478891621.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:41.908Z,1478891621.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:42.058Z,1478891622.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:42.458Z,1478891622.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:42.672Z,1478891622.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:42.854Z,1478891622.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:43.261Z,1478891623.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:43.468Z,1478891623.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:43.663Z,1478891623.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:44.054Z,1478891624.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:44.270Z,1478891624.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:44.459Z,1478891624.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:44.704Z,1478891624.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:44.865Z,1478891624.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:45.257Z,1478891625.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:45.500Z,1478891625.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:45.664Z,1478891625.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:46.066Z,1478891626.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:46.200Z,1478891626.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:46.452Z,1478891626.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:46.860Z,1478891626.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:46.996Z,1478891626.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:47.261Z,1478891627.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:47.657Z,1478891627.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:47.793Z,1478891627.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:48.105Z,1478891628.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:48.204Z,1478891628.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:48.489Z,1478891628.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:48.864Z,1478891628.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:48.000Z,1478891629.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:49.263Z,1478891629.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:49.677Z,1478891629.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:49.801Z,1478891629.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:50.064Z,1478891630.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:50.220Z,1478891630.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:50.477Z,1478891630.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:50.875Z,1478891630.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:51.016Z,1478891631.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:51.244Z,1478891631.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:51.653Z,1478891631.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:51.813Z,1478891631.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:52.076Z,1478891632.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:52.224Z,1478891632.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:52.450Z,1478891632.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:52.853Z,1478891632.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:53.020Z,1478891633.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:53.247Z,1478891633.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:53.647Z,1478891633.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:53.819Z,1478891633.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:54.056Z,1478891634.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:54.296Z,1478891634.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:54.451Z,1478891634.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:54.851Z,1478891634.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:55.092Z,1478891635.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:55.257Z,1478891635.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:55.651Z,1478891635.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:55.888Z,1478891635.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:56.055Z,1478891636.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:56.465Z,1478891636.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:56.660Z,1478891636.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:56.862Z,1478891636.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:57.254Z,1478891637.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:57.456Z,1478891637.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:57.662Z,1478891637.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:58.065Z,1478891638.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:58.254Z,1478891638.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:58.449Z,1478891638.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:58.672Z,1478891638.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:58.853Z,1478891638.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:59.251Z,1478891639.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:13:59.468Z,1478891639.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:13:59.647Z,1478891639.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:00.056Z,1478891640.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:00.188Z,1478891640.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:00.451Z,1478891640.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:00.851Z,1478891640.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:00.984Z,1478891640.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:01.259Z,1478891641.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:01.691Z,1478891641.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:01.781Z,1478891641.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:02.054Z,1478891642.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:02.192Z,1478891642.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:02.454Z,1478891642.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:02.909Z,1478891642.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:02.988Z,1478891642.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:03.269Z,1478891643.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:03.649Z,1478891643.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:03.785Z,1478891643.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:04.077Z,1478891644.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:04.196Z,1478891644.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:04.461Z,1478891644.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:04.887Z,1478891644.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:04.992Z,1478891644.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:05.288Z,1478891645.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:05.650Z,1478891645.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:05.789Z,1478891645.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:06.056Z,1478891646.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:06.200Z,1478891646.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:06.451Z,1478891646.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:06.851Z,1478891646.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:06.996Z,1478891646.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:07.255Z,1478891647.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:07.651Z,1478891647.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:07.792Z,1478891647.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:08.052Z,1478891648.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:08.268Z,1478891648.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:08.454Z,1478891648.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:08.862Z,1478891648.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:09.064Z,1478891649.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:09.254Z,1478891649.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:09.659Z,1478891649.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:09.860Z,1478891649.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:10.059Z,1478891650.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:10.454Z,1478891650.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:10.628Z,1478891650.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:10.859Z,1478891650.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:11.265Z,1478891651.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:11.424Z,1478891651.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:11.654Z,1478891651.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:12.053Z,1478891652.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:12.221Z,1478891652.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:12.465Z,1478891652.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:12.632Z,1478891652.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:12.857Z,1478891652.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:13.265Z,1478891653.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:13.428Z,1478891653.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:13.665Z,1478891653.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:14.072Z,1478891654.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:14.168Z,1478891654.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:14.469Z,1478891654.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:14.853Z,1478891654.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:14.964Z,1478891654.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:15.255Z,1478891655.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:15.656Z,1478891655.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:15.765Z,1478891655.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:16.065Z,1478891656.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:16.180Z,1478891656.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:16.437Z,1478891656.437 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T19:14:16.437Z,1478891656.437 [BPC1] Data Fault, FailCount= 1
2016-11-11T19:14:16.437Z,1478891656.437 [BPC1](ERROR): Data Fault
2016-11-11T19:14:16.478Z,1478891656.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:16.517Z,1478891656.517 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T19:14:16.846Z,1478891656.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:16.976Z,1478891656.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:17.250Z,1478891657.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:17.650Z,1478891657.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:17.687Z,1478891657.687 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:14:17.687Z,1478891657.687 [BPC1] No Fault, FailCount= 1
2016-11-11T19:14:17.776Z,1478891657.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:18.109Z,1478891658.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:18.184Z,1478891658.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:18.474Z,1478891658.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:18.869Z,1478891658.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:18.980Z,1478891658.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:19.243Z,1478891659.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:19.649Z,1478891659.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:19.776Z,1478891659.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:20.050Z,1478891660.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:20.184Z,1478891660.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:20.450Z,1478891660.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:20.850Z,1478891660.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:20.980Z,1478891660.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:21.251Z,1478891661.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:21.650Z,1478891661.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:21.776Z,1478891661.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:22.059Z,1478891662.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:22.260Z,1478891662.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:22.451Z,1478891662.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:22.857Z,1478891662.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:23.056Z,1478891663.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:23.251Z,1478891663.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:23.652Z,1478891663.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:23.852Z,1478891663.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:24.065Z,1478891664.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:24.463Z,1478891664.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:24.608Z,1478891664.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:25.404Z,1478891665.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:26.201Z,1478891666.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:26.620Z,1478891666.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:27.416Z,1478891667.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:28.005Z,1478891668.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:28.113Z,1478891668.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:28.145Z,1478891668.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:28.485Z,1478891668.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:28.879Z,1478891668.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:28.940Z,1478891668.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:29.283Z,1478891669.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:29.689Z,1478891669.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:29.737Z,1478891669.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:30.097Z,1478891670.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:30.160Z,1478891670.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:30.530Z,1478891670.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:30.885Z,1478891670.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:30.956Z,1478891670.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:31.306Z,1478891671.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:31.679Z,1478891671.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:31.752Z,1478891671.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:32.125Z,1478891672.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:32.164Z,1478891672.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:32.526Z,1478891672.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:32.880Z,1478891672.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:32.960Z,1478891672.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:33.281Z,1478891673.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:33.717Z,1478891673.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:33.756Z,1478891673.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:34.100Z,1478891674.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:34.164Z,1478891674.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:34.477Z,1478891674.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:34.877Z,1478891674.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:34.960Z,1478891674.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:35.277Z,1478891675.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:35.681Z,1478891675.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:35.756Z,1478891675.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:36.077Z,1478891676.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:36.228Z,1478891676.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:36.479Z,1478891676.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:36.884Z,1478891676.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:37.024Z,1478891677.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:37.285Z,1478891677.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:37.679Z,1478891677.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:37.820Z,1478891677.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:38.093Z,1478891678.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:38.478Z,1478891678.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:38.588Z,1478891678.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:38.882Z,1478891678.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:39.278Z,1478891679.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:39.384Z,1478891679.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:39.689Z,1478891679.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:40.080Z,1478891680.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:40.180Z,1478891680.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:40.491Z,1478891680.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:40.604Z,1478891680.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:40.893Z,1478891680.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:41.292Z,1478891681.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:41.400Z,1478891681.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:41.754Z,1478891681.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:42.079Z,1478891682.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:42.144Z,1478891682.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:42.483Z,1478891682.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:42.885Z,1478891682.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:42.940Z,1478891682.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:43.286Z,1478891683.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:43.737Z,1478891683.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:43.756Z,1478891683.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:44.129Z,1478891684.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:44.148Z,1478891684.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:44.528Z,1478891684.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:44.892Z,1478891684.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:44.944Z,1478891684.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:45.309Z,1478891685.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:45.737Z,1478891685.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:45.740Z,1478891685.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:46.120Z,1478891686.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:46.148Z,1478891686.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:46.521Z,1478891686.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:46.885Z,1478891686.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:46.944Z,1478891686.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:47.284Z,1478891687.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:47.729Z,1478891687.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:47.740Z,1478891687.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:48.079Z,1478891688.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:48.148Z,1478891688.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:48.480Z,1478891688.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:48.885Z,1478891688.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:48.944Z,1478891688.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:49.289Z,1478891689.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:49.683Z,1478891689.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:49.740Z,1478891689.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:50.087Z,1478891690.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:50.208Z,1478891690.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:50.489Z,1478891690.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:50.885Z,1478891690.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:51.004Z,1478891691.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:51.295Z,1478891691.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:51.716Z,1478891691.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:51.800Z,1478891691.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:52.097Z,1478891692.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:52.502Z,1478891692.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:52.564Z,1478891692.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:52.872Z,1478891692.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:53.277Z,1478891693.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:53.360Z,1478891693.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:53.690Z,1478891693.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:54.081Z,1478891694.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:54.157Z,1478891694.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:54.501Z,1478891694.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:54.580Z,1478891694.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:54.888Z,1478891694.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:55.292Z,1478891695.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:55.376Z,1478891695.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:55.735Z,1478891695.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:56.078Z,1478891696.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:56.120Z,1478891696.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:56.477Z,1478891696.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:56.885Z,1478891696.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:56.916Z,1478891696.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:57.286Z,1478891697.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:57.712Z,1478891697.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:57.754Z,1478891697.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:58.099Z,1478891698.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:58.124Z,1478891698.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:58.517Z,1478891698.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:58.890Z,1478891698.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:58.920Z,1478891698.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:14:59.318Z,1478891699.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:59.715Z,1478891699.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:14:59.716Z,1478891699.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:00.116Z,1478891700.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:00.132Z,1478891700.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:00.481Z,1478891700.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:00.925Z,1478891700.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:00.928Z,1478891700.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:01.285Z,1478891701.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:01.724Z,1478891701.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:01.754Z,1478891701.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:02.097Z,1478891702.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:02.132Z,1478891702.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:02.498Z,1478891702.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:02.891Z,1478891702.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:02.928Z,1478891702.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:03.295Z,1478891703.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:03.680Z,1478891703.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:03.724Z,1478891703.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:04.082Z,1478891704.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:04.192Z,1478891704.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:04.482Z,1478891704.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:04.878Z,1478891704.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:04.988Z,1478891704.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:05.283Z,1478891705.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:05.683Z,1478891705.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:05.784Z,1478891705.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:06.091Z,1478891706.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:06.481Z,1478891706.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:06.556Z,1478891706.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:06.897Z,1478891706.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:07.288Z,1478891707.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:07.352Z,1478891707.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:07.672Z,1478891707.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:08.072Z,1478891708.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:08.149Z,1478891708.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:08.497Z,1478891708.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:08.560Z,1478891708.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:08.896Z,1478891708.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:09.301Z,1478891709.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:09.356Z,1478891709.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:09.729Z,1478891709.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:10.089Z,1478891710.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:10.104Z,1478891710.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:10.493Z,1478891710.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:10.893Z,1478891710.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:10.900Z,1478891710.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:11.285Z,1478891711.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:11.696Z,1478891711.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:11.762Z,1478891711.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:12.094Z,1478891712.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:12.108Z,1478891712.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:12.495Z,1478891712.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:12.904Z,1478891712.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:12.906Z,1478891712.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:13.284Z,1478891713.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:13.700Z,1478891713.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:13.765Z,1478891713.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:14.108Z,1478891714.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:14.122Z,1478891714.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:14.493Z,1478891714.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:14.904Z,1478891714.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:14.911Z,1478891714.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:15.310Z,1478891715.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:15.700Z,1478891715.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:15.734Z,1478891715.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:16.093Z,1478891716.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:16.108Z,1478891716.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:16.497Z,1478891716.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:16.897Z,1478891716.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:16.904Z,1478891716.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:17.298Z,1478891717.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:17.678Z,1478891717.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:17.700Z,1478891717.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:18.089Z,1478891718.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:18.164Z,1478891718.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:18.482Z,1478891718.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:18.901Z,1478891718.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:18.960Z,1478891718.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:19.275Z,1478891719.275 [PNI_TCM](ERROR): CRC does not match. Expected:0x41035 got:0x48989
2016-11-11T19:15:19.294Z,1478891719.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:19.683Z,1478891719.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:19.757Z,1478891719.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:20.148Z,1478891720.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:20.484Z,1478891720.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:20.532Z,1478891720.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:20.894Z,1478891720.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:21.292Z,1478891721.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:21.328Z,1478891721.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:21.689Z,1478891721.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:22.118Z,1478891722.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:22.124Z,1478891722.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:22.489Z,1478891722.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:22.536Z,1478891722.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:22.889Z,1478891722.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:23.284Z,1478891723.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:23.332Z,1478891723.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:23.723Z,1478891723.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:24.046Z,1478891724.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:24.101Z,1478891724.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:24.495Z,1478891724.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:24.840Z,1478891724.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:25.636Z,1478891725.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:26.052Z,1478891726.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:26.848Z,1478891726.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:27.645Z,1478891727.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:27.993Z,1478891727.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:28.056Z,1478891728.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:28.117Z,1478891728.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:28.479Z,1478891728.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:28.852Z,1478891728.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:28.903Z,1478891728.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:29.281Z,1478891729.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:29.650Z,1478891729.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:29.721Z,1478891729.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:30.060Z,1478891730.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:30.117Z,1478891730.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:30.465Z,1478891730.465 [PNI_TCM](ERROR): CRC does not match. Expected:0x30706 got:0x16872
2016-11-11T19:15:30.505Z,1478891730.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:30.856Z,1478891730.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:30.882Z,1478891730.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:31.275Z,1478891731.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:31.653Z,1478891731.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:31.689Z,1478891731.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:32.094Z,1478891732.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:32.148Z,1478891732.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:32.487Z,1478891732.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:32.876Z,1478891732.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:32.944Z,1478891732.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:33.274Z,1478891733.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:33.679Z,1478891733.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:33.740Z,1478891733.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:34.132Z,1478891734.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:34.484Z,1478891734.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:34.516Z,1478891734.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:34.880Z,1478891734.880 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:34.880Z,1478891734.880 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 268
2016-11-11T19:15:34.881Z,1478891734.881 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:15:34.887Z,1478891734.887 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:34.887Z,1478891734.887 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 268
2016-11-11T19:15:34.887Z,1478891734.887 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:15:34.889Z,1478891734.889 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:34.889Z,1478891734.889 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 268
2016-11-11T19:15:34.889Z,1478891734.889 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:15:34.929Z,1478891734.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:15:34.929Z,1478891734.929 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:15:34.929Z,1478891734.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:15:35.296Z,1478891735.296 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:15:35.296Z,1478891735.296 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 268
2016-11-11T19:15:35.297Z,1478891735.297 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:15:35.297Z,1478891735.297 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 268
2016-11-11T19:15:35.297Z,1478891735.297 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:15:35.298Z,1478891735.297 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 268
2016-11-11T19:15:35.312Z,1478891735.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:35.683Z,1478891735.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:15:35.683Z,1478891735.684 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:15:35.684Z,1478891735.684 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:15:35.688Z,1478891735.688 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:15:35.689Z,1478891735.689 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:15:35.689Z,1478891735.689 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:15:35.690Z,1478891735.690 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:15:35.690Z,1478891735.690 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:15:35.691Z,1478891735.691 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:15:36.109Z,1478891736.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:36.154Z,1478891736.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:36.487Z,1478891736.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:36.528Z,1478891736.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:36.887Z,1478891736.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:37.293Z,1478891737.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:37.324Z,1478891737.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:37.696Z,1478891737.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:38.020Z,1478891738.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:38.091Z,1478891738.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:38.489Z,1478891738.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:38.816Z,1478891738.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:38.886Z,1478891738.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:39.278Z,1478891739.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:39.613Z,1478891739.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:39.701Z,1478891739.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:40.024Z,1478891740.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:40.083Z,1478891740.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:40.478Z,1478891740.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:40.820Z,1478891740.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:40.902Z,1478891740.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:41.286Z,1478891741.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:41.621Z,1478891741.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:41.709Z,1478891741.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:42.076Z,1478891742.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:42.110Z,1478891742.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:42.475Z,1478891742.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:42.872Z,1478891742.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:42.885Z,1478891742.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:43.306Z,1478891743.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:43.695Z,1478891743.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:43.722Z,1478891743.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:44.098Z,1478891744.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:44.116Z,1478891744.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:44.505Z,1478891744.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:44.880Z,1478891744.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:44.912Z,1478891744.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:45.293Z,1478891745.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:45.705Z,1478891745.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:45.709Z,1478891745.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:46.080Z,1478891746.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:46.120Z,1478891746.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:46.475Z,1478891746.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:46.881Z,1478891746.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:46.916Z,1478891746.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:47.275Z,1478891747.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:47.678Z,1478891747.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:47.712Z,1478891747.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:48.152Z,1478891748.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:48.468Z,1478891748.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:48.475Z,1478891748.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:48.881Z,1478891748.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:49.264Z,1478891749.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:49.276Z,1478891749.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:49.685Z,1478891749.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:50.060Z,1478891750.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:50.136Z,1478891750.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:50.481Z,1478891750.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:50.520Z,1478891750.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:50.874Z,1478891750.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:51.274Z,1478891751.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:51.316Z,1478891751.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:51.685Z,1478891751.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:51.997Z,1478891751.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:52.079Z,1478891752.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:52.489Z,1478891752.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:52.792Z,1478891752.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:52.886Z,1478891752.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:53.278Z,1478891753.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:53.589Z,1478891753.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:53.691Z,1478891753.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:54.004Z,1478891754.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:54.086Z,1478891754.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:54.481Z,1478891754.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:54.800Z,1478891754.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:54.877Z,1478891754.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:55.309Z,1478891755.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:55.597Z,1478891755.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:55.697Z,1478891755.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:56.008Z,1478891756.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:56.088Z,1478891756.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:56.502Z,1478891756.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:56.804Z,1478891756.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:56.882Z,1478891756.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:57.277Z,1478891757.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:57.600Z,1478891757.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:57.741Z,1478891757.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:58.076Z,1478891758.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:58.124Z,1478891758.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:58.502Z,1478891758.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:58.909Z,1478891758.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:58.920Z,1478891758.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:59.284Z,1478891759.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:15:59.720Z,1478891759.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:15:59.748Z,1478891759.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:00.072Z,1478891760.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:00.128Z,1478891760.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:00.475Z,1478891760.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:00.881Z,1478891760.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:00.924Z,1478891760.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:01.286Z,1478891761.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:01.684Z,1478891761.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:01.720Z,1478891761.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:02.133Z,1478891762.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:02.460Z,1478891762.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:02.476Z,1478891762.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:02.875Z,1478891762.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:03.257Z,1478891763.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:03.276Z,1478891763.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:03.689Z,1478891763.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:04.053Z,1478891764.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:04.121Z,1478891764.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:04.465Z,1478891764.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:04.501Z,1478891764.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:04.886Z,1478891764.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:05.260Z,1478891765.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:05.290Z,1478891765.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:05.687Z,1478891765.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:05.980Z,1478891765.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:06.089Z,1478891766.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:06.473Z,1478891766.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:06.776Z,1478891766.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:06.871Z,1478891766.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:07.276Z,1478891767.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:07.579Z,1478891767.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:07.687Z,1478891767.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:08.008Z,1478891768.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:08.076Z,1478891768.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:08.479Z,1478891768.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:08.804Z,1478891768.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:08.868Z,1478891768.868 [BPC1](ERROR): Failed to parse message.
2016-11-11T19:16:08.869Z,1478891768.869 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T19:16:08.869Z,1478891768.869 [BPC1] Data Fault, FailCount= 1
2016-11-11T19:16:08.869Z,1478891768.869 [BPC1](ERROR): Data Fault
2016-11-11T19:16:08.881Z,1478891768.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:08.935Z,1478891768.935 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T19:16:09.285Z,1478891769.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:09.600Z,1478891769.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:09.684Z,1478891769.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:10.020Z,1478891770.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:10.089Z,1478891770.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:10.118Z,1478891770.118 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:16:10.118Z,1478891770.118 [BPC1] No Fault, FailCount= 1
2016-11-11T19:16:10.537Z,1478891770.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:10.817Z,1478891770.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:10.928Z,1478891770.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:11.284Z,1478891771.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:11.613Z,1478891771.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:11.701Z,1478891771.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:12.024Z,1478891772.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:12.089Z,1478891772.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:12.126Z,1478891772.126 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T19:16:12.481Z,1478891772.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:12.821Z,1478891772.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:12.896Z,1478891772.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:13.293Z,1478891773.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:13.616Z,1478891773.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:13.747Z,1478891773.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:14.073Z,1478891774.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:14.120Z,1478891774.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:14.477Z,1478891774.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:14.872Z,1478891774.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:14.916Z,1478891774.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:15.281Z,1478891775.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:15.675Z,1478891775.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:15.712Z,1478891775.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:16.106Z,1478891776.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:16.440Z,1478891776.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:16.486Z,1478891776.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:16.889Z,1478891776.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:17.236Z,1478891777.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:17.287Z,1478891777.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:17.683Z,1478891777.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:18.033Z,1478891778.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:18.120Z,1478891778.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:18.444Z,1478891778.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:18.481Z,1478891778.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:18.884Z,1478891778.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:19.240Z,1478891779.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:19.289Z,1478891779.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:19.681Z,1478891779.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:19.960Z,1478891779.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:20.080Z,1478891780.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:20.485Z,1478891780.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:20.758Z,1478891780.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:20.876Z,1478891780.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:21.285Z,1478891781.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:21.563Z,1478891781.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:21.729Z,1478891781.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:21.988Z,1478891781.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:22.084Z,1478891782.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:22.485Z,1478891782.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:22.784Z,1478891782.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:22.888Z,1478891782.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:23.284Z,1478891783.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:23.580Z,1478891783.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:23.688Z,1478891783.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:23.988Z,1478891783.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:24.088Z,1478891784.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:24.097Z,1478891784.096 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T19:16:24.097Z,1478891784.097 [Default:CheckIn:C.Wait] Stopped
2016-11-11T19:16:24.097Z,1478891784.097 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T19:16:24.097Z,1478891784.097 [Default:CheckIn:D] Running Loop=1
2016-11-11T19:16:24.480Z,1478891784.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:24.497Z,1478891784.497 [Default:CheckIn:D] Stopped
2016-11-11T19:16:24.497Z,1478891784.497 [Default:CheckIn:E] Running Loop=1
2016-11-11T19:16:24.784Z,1478891784.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:24.894Z,1478891784.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:24.932Z,1478891784.932 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 866.386458 min 
2016-11-11T19:16:24.932Z,1478891784.932 [Default:CheckIn:E] Stopped
2016-11-11T19:16:24.933Z,1478891784.932 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T19:16:24.933Z,1478891784.933 [Default:CheckIn] Stopped
2016-11-11T19:16:24.933Z,1478891784.933 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T19:16:24.933Z,1478891784.933 [Default:CheckIn](INFO): Running loop #84
2016-11-11T19:16:24.933Z,1478891784.933 [Default:CheckIn] Running Loop=84
2016-11-11T19:16:24.933Z,1478891784.933 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T19:16:24.933Z,1478891784.933 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T19:16:25.581Z,1478891785.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:25.992Z,1478891785.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:26.788Z,1478891786.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:27.584Z,1478891787.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:28.056Z,1478891788.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:28.297Z,1478891788.297 [BPC1](ERROR): Failed to receive battery data
2016-11-11T19:16:28.297Z,1478891788.297 [BPC1] Communications Fault, FailCount= 2
2016-11-11T19:16:28.298Z,1478891788.297 [BPC1](ERROR): Communications Fault
2016-11-11T19:16:28.306Z,1478891788.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:28.325Z,1478891788.325 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T19:16:28.404Z,1478891788.404 [NAL9602](INFO): Powering up
2016-11-11T19:16:28.445Z,1478891788.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:28.779Z,1478891788.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:28.852Z,1478891788.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:29.206Z,1478891789.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:29.225Z,1478891789.225 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:16:29.225Z,1478891789.225 [BPC1] No Fault, FailCount= 2
2016-11-11T19:16:29.572Z,1478891789.572 [PNI_TCM](ERROR): CRC does not match. Expected:0x45350 got:0x51207
2016-11-11T19:16:29.648Z,1478891789.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:29.652Z,1478891789.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:30.039Z,1478891790.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:30.386Z,1478891790.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:30.420Z,1478891790.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:30.783Z,1478891790.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:31.186Z,1478891791.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:31.216Z,1478891791.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:31.577Z,1478891791.577 [PNI_TCM](ERROR): CRC does not match. Expected:0x11825 got:0x32768
2016-11-11T19:16:31.605Z,1478891791.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:32.012Z,1478891792.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:32.034Z,1478891792.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:32.383Z,1478891792.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:32.785Z,1478891792.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:32.808Z,1478891792.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:33.188Z,1478891793.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:33.216Z,1478891793.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:33.632Z,1478891793.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:33.946Z,1478891793.946 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:33.988Z,1478891793.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:34.390Z,1478891794.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:34.740Z,1478891794.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:34.793Z,1478891794.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:35.192Z,1478891795.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:35.536Z,1478891795.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:35.624Z,1478891795.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:35.949Z,1478891795.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:36.001Z,1478891796.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:36.377Z,1478891796.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:36.744Z,1478891796.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:36.786Z,1478891796.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:37.182Z,1478891797.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:37.541Z,1478891797.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:37.629Z,1478891797.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:37.953Z,1478891797.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:37.994Z,1478891797.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:38.391Z,1478891798.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:38.749Z,1478891798.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:38.797Z,1478891798.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:39.205Z,1478891799.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:39.544Z,1478891799.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:39.554Z,1478891799.554 [NAL9602](INFO): NAL9602 initialized
2016-11-11T19:16:39.624Z,1478891799.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:39.957Z,1478891799.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:39.999Z,1478891799.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:40.397Z,1478891800.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:40.752Z,1478891800.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:40.854Z,1478891800.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:41.203Z,1478891801.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:41.549Z,1478891801.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:41.578Z,1478891801.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:42.021Z,1478891802.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:42.028Z,1478891802.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:42.387Z,1478891802.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:42.822Z,1478891802.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:42.824Z,1478891802.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:43.193Z,1478891803.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:43.620Z,1478891803.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:43.629Z,1478891803.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:44.069Z,1478891804.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:44.388Z,1478891804.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:44.409Z,1478891804.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:44.777Z,1478891804.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:45.184Z,1478891805.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:45.206Z,1478891805.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:45.579Z,1478891805.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:45.980Z,1478891805.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:46.025Z,1478891806.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:46.389Z,1478891806.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:46.424Z,1478891806.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:46.783Z,1478891806.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:47.197Z,1478891807.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:47.220Z,1478891807.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:47.596Z,1478891807.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:47.913Z,1478891807.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:47.976Z,1478891807.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:48.380Z,1478891808.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:48.708Z,1478891808.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:48.781Z,1478891808.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:49.181Z,1478891809.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:49.505Z,1478891809.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:49.617Z,1478891809.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:49.920Z,1478891809.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:49.992Z,1478891809.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:50.389Z,1478891810.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:50.716Z,1478891810.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:50.802Z,1478891810.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:51.214Z,1478891811.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:51.513Z,1478891811.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:51.586Z,1478891811.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:51.925Z,1478891811.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:51.992Z,1478891811.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:52.400Z,1478891812.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:52.720Z,1478891812.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:52.788Z,1478891812.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:53.205Z,1478891813.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:53.518Z,1478891813.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:53.577Z,1478891813.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:53.984Z,1478891813.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:53.993Z,1478891813.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:54.406Z,1478891814.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:54.780Z,1478891814.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:54.839Z,1478891814.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:55.213Z,1478891815.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:55.577Z,1478891815.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:55.679Z,1478891815.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:56.036Z,1478891816.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:56.058Z,1478891816.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:56.394Z,1478891816.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:56.813Z,1478891816.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:56.832Z,1478891816.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:57.220Z,1478891817.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:57.591Z,1478891817.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:57.628Z,1478891817.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:58.085Z,1478891818.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:58.404Z,1478891818.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:58.407Z,1478891818.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:58.807Z,1478891818.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:59.200Z,1478891819.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:16:59.209Z,1478891819.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:59.586Z,1478891819.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:16:59.996Z,1478891819.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:00.064Z,1478891820.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:00.377Z,1478891820.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:00.412Z,1478891820.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:00.781Z,1478891820.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:01.185Z,1478891821.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:01.208Z,1478891821.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:01.587Z,1478891821.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:01.912Z,1478891821.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:02.001Z,1478891822.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:02.385Z,1478891822.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:02.711Z,1478891822.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:02.793Z,1478891822.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:03.204Z,1478891823.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:03.509Z,1478891823.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:03.602Z,1478891823.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:03.920Z,1478891823.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:03.992Z,1478891823.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:04.396Z,1478891824.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:04.716Z,1478891824.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:04.793Z,1478891824.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:05.206Z,1478891825.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:05.512Z,1478891825.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:05.608Z,1478891825.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:06.004Z,1478891826.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:06.301Z,1478891826.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:06.384Z,1478891826.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:06.794Z,1478891826.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:07.096Z,1478891827.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:07.199Z,1478891827.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:07.575Z,1478891827.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:07.880Z,1478891827.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:07.000Z,1478891828.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:08.397Z,1478891828.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:08.679Z,1478891828.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:08.829Z,1478891828.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:09.266Z,1478891829.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:09.472Z,1478891829.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:09.649Z,1478891829.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:10.017Z,1478891830.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:10.032Z,1478891830.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:10.461Z,1478891830.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:10.798Z,1478891830.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:10.828Z,1478891830.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:11.213Z,1478891831.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:11.541Z,1478891831.541 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-11T19:17:11.623Z,1478891831.623 [NAL9602](FAULT): received: 
+CSQ:0

OK5, 0, 0, 0, 0

OK
2016-11-11T19:17:11.623Z,1478891831.624 [NAL9602] Data Fault, FailCount= 1
2016-11-11T19:17:11.624Z,1478891831.624 [NAL9602](ERROR): Data Fault
2016-11-11T19:17:11.627Z,1478891831.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:11.714Z,1478891831.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:11.808Z,1478891831.808 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T19:17:11.949Z,1478891831.949 [NAL9602](INFO): Powering down
2016-11-11T19:17:12.021Z,1478891832.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:12.405Z,1478891832.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:12.424Z,1478891832.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:12.808Z,1478891832.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:12.856Z,1478891832.856 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T19:17:12.857Z,1478891832.856 [NAL9602] No Fault, FailCount= 1
2016-11-11T19:17:13.120Z,1478891833.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:13.171Z,1478891833.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:13.576Z,1478891833.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:13.921Z,1478891833.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:13.996Z,1478891833.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:14.380Z,1478891834.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:14.382Z,1478891834.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:14.777Z,1478891834.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:15.176Z,1478891835.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:15.178Z,1478891835.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:15.572Z,1478891835.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:15.972Z,1478891835.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:15.978Z,1478891835.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:16.377Z,1478891836.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:16.768Z,1478891836.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:16.781Z,1478891836.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:17.145Z,1478891837.145 [NAL9602](INFO): Powering up NAL9602
2016-11-11T19:17:17.181Z,1478891837.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:17.564Z,1478891837.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:17.601Z,1478891837.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:17.981Z,1478891837.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:18.361Z,1478891838.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:18.377Z,1478891838.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:18.776Z,1478891838.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:19.158Z,1478891839.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:19.181Z,1478891839.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:19.572Z,1478891839.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:19.952Z,1478891839.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:20.004Z,1478891840.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:20.376Z,1478891840.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:20.750Z,1478891840.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:20.815Z,1478891840.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:21.172Z,1478891841.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:21.544Z,1478891841.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:21.585Z,1478891841.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:21.972Z,1478891841.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:22.340Z,1478891842.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:22.374Z,1478891842.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:22.773Z,1478891842.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:23.136Z,1478891843.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:23.182Z,1478891843.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:23.589Z,1478891843.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:23.940Z,1478891843.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:24.001Z,1478891844.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:24.377Z,1478891844.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:24.736Z,1478891844.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:24.776Z,1478891844.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:25.177Z,1478891845.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:25.544Z,1478891845.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:26.340Z,1478891846.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:27.136Z,1478891847.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:27.932Z,1478891847.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:28.605Z,1478891848.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:28.723Z,1478891848.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:28.728Z,1478891848.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:29.041Z,1478891849.041 [NAL9602](INFO): NAL9602 initialized
2016-11-11T19:17:29.105Z,1478891849.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:29.506Z,1478891849.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:29.524Z,1478891849.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:29.890Z,1478891849.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:30.320Z,1478891850.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:30.359Z,1478891850.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:30.689Z,1478891850.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:31.075Z,1478891851.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:31.116Z,1478891851.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:31.493Z,1478891851.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:31.867Z,1478891851.867 [PNI_TCM](ERROR): CRC does not match. Expected:0x42371 got:0x48723
2016-11-11T19:17:31.893Z,1478891851.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:31.912Z,1478891851.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:32.283Z,1478891852.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:32.687Z,1478891852.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:32.708Z,1478891852.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:33.085Z,1478891853.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:33.479Z,1478891853.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:33.504Z,1478891853.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:33.878Z,1478891853.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:34.272Z,1478891854.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:34.300Z,1478891854.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:34.697Z,1478891854.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:35.075Z,1478891855.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:35.096Z,1478891855.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:35.477Z,1478891855.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:35.873Z,1478891855.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:35.892Z,1478891855.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:36.275Z,1478891856.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:36.681Z,1478891856.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:36.688Z,1478891856.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:37.087Z,1478891857.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:37.484Z,1478891857.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:37.504Z,1478891857.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:37.905Z,1478891857.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:38.280Z,1478891858.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:38.287Z,1478891858.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:38.689Z,1478891858.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:39.076Z,1478891859.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:39.085Z,1478891859.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:39.529Z,1478891859.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:39.756Z,1478891859.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:39.937Z,1478891859.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:40.164Z,1478891860.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:40.314Z,1478891860.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:40.572Z,1478891860.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:40.704Z,1478891860.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:40.980Z,1478891860.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:41.090Z,1478891861.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:41.388Z,1478891861.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:41.549Z,1478891861.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:41.796Z,1478891861.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:41.942Z,1478891861.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:42.204Z,1478891862.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:42.301Z,1478891862.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:42.612Z,1478891862.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:42.709Z,1478891862.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:43.020Z,1478891863.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:43.113Z,1478891863.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:43.444Z,1478891863.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:43.530Z,1478891863.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:43.856Z,1478891863.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:43.903Z,1478891863.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:44.264Z,1478891864.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:44.288Z,1478891864.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:44.676Z,1478891864.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:44.697Z,1478891864.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:45.084Z,1478891865.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:45.101Z,1478891865.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:45.492Z,1478891865.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:45.536Z,1478891865.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:45.890Z,1478891865.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:45.900Z,1478891865.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:46.305Z,1478891866.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:46.679Z,1478891866.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:46.696Z,1478891866.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:47.090Z,1478891867.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:47.492Z,1478891867.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:47.501Z,1478891867.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:47.898Z,1478891867.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:47.900Z,1478891867.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:48.301Z,1478891868.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:48.689Z,1478891868.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:48.696Z,1478891868.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:49.086Z,1478891869.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:49.492Z,1478891869.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:49.528Z,1478891869.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:49.900Z,1478891869.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:49.909Z,1478891869.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:50.290Z,1478891870.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:50.690Z,1478891870.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:50.696Z,1478891870.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:51.102Z,1478891871.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:51.493Z,1478891871.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:51.522Z,1478891871.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:51.878Z,1478891871.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:51.944Z,1478891871.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:52.283Z,1478891872.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:52.697Z,1478891872.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:52.740Z,1478891872.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:53.098Z,1478891873.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:53.489Z,1478891873.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:53.536Z,1478891873.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:53.950Z,1478891873.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:54.280Z,1478891874.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:54.298Z,1478891874.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:54.713Z,1478891874.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:55.076Z,1478891875.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:55.098Z,1478891875.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:55.486Z,1478891875.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:55.873Z,1478891875.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:55.987Z,1478891875.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:56.284Z,1478891876.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:56.296Z,1478891876.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:56.700Z,1478891876.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:57.080Z,1478891877.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:57.113Z,1478891877.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:57.482Z,1478891877.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:57.800Z,1478891877.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:57.913Z,1478891877.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:58.325Z,1478891878.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:58.596Z,1478891878.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:58.691Z,1478891878.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:59.097Z,1478891879.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:59.393Z,1478891879.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:59.490Z,1478891879.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:17:59.804Z,1478891879.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:17:59.889Z,1478891879.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:00.286Z,1478891880.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:00.600Z,1478891880.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:00.677Z,1478891880.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:01.079Z,1478891881.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:01.397Z,1478891881.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:01.488Z,1478891881.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:01.812Z,1478891881.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:01.885Z,1478891881.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:02.278Z,1478891882.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:02.610Z,1478891882.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:02.689Z,1478891882.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:03.090Z,1478891883.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:03.405Z,1478891883.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:03.513Z,1478891883.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:03.816Z,1478891883.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:03.895Z,1478891883.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:04.285Z,1478891884.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:04.612Z,1478891884.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:04.689Z,1478891884.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:05.081Z,1478891885.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:05.408Z,1478891885.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:05.539Z,1478891885.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:05.875Z,1478891885.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:05.932Z,1478891885.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:06.285Z,1478891886.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:06.679Z,1478891886.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:06.728Z,1478891886.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:07.077Z,1478891887.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:07.478Z,1478891887.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:07.524Z,1478891887.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:07.933Z,1478891887.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:08.266Z,1478891888.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:08.305Z,1478891888.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:08.701Z,1478891888.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:09.061Z,1478891889.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:09.122Z,1478891889.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:09.476Z,1478891889.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:09.857Z,1478891889.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:09.931Z,1478891889.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:10.268Z,1478891890.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:10.322Z,1478891890.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:10.677Z,1478891890.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:11.065Z,1478891891.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:11.086Z,1478891891.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:11.522Z,1478891891.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:11.784Z,1478891891.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:11.894Z,1478891891.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:12.331Z,1478891892.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:12.580Z,1478891892.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:12.710Z,1478891892.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:13.078Z,1478891893.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:13.377Z,1478891893.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:13.484Z,1478891893.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:13.788Z,1478891893.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:13.882Z,1478891893.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:14.268Z,1478891894.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:14.584Z,1478891894.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:14.673Z,1478891894.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:15.073Z,1478891895.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:15.381Z,1478891895.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:15.495Z,1478891895.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:15.800Z,1478891895.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:15.881Z,1478891895.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:16.286Z,1478891896.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:16.596Z,1478891896.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:16.697Z,1478891896.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:17.100Z,1478891897.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:17.393Z,1478891897.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:17.507Z,1478891897.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:17.804Z,1478891897.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:17.894Z,1478891897.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:18.297Z,1478891898.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:18.600Z,1478891898.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:18.685Z,1478891898.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:19.077Z,1478891899.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:19.396Z,1478891899.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:19.537Z,1478891899.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:19.889Z,1478891899.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:19.916Z,1478891899.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:20.289Z,1478891900.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:20.688Z,1478891900.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:20.712Z,1478891900.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:21.086Z,1478891901.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:21.469Z,1478891901.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:21.508Z,1478891901.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:21.916Z,1478891901.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:22.236Z,1478891902.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:22.299Z,1478891902.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:22.700Z,1478891902.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:23.032Z,1478891903.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:23.100Z,1478891903.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:23.506Z,1478891903.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:23.862Z,1478891903.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:23.922Z,1478891903.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:24.278Z,1478891904.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:24.300Z,1478891904.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:24.690Z,1478891904.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:25.096Z,1478891905.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:25.113Z,1478891905.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:25.485Z,1478891905.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:25.760Z,1478891905.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:26.556Z,1478891906.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:27.352Z,1478891907.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:27.764Z,1478891907.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:28.560Z,1478891908.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:29.053Z,1478891909.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:29.201Z,1478891909.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:29.368Z,1478891909.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:29.613Z,1478891909.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:29.784Z,1478891909.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:30.005Z,1478891910.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:30.373Z,1478891910.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:30.580Z,1478891910.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:30.766Z,1478891910.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:31.214Z,1478891911.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:31.377Z,1478891911.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:31.561Z,1478891911.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:31.788Z,1478891911.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:31.967Z,1478891911.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:32.373Z,1478891912.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:32.584Z,1478891912.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:32.797Z,1478891912.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:33.169Z,1478891913.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:33.380Z,1478891913.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:33.555Z,1478891913.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:33.860Z,1478891913.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:33.972Z,1478891913.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:34.367Z,1478891914.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:34.656Z,1478891914.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:34.771Z,1478891914.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:35.175Z,1478891915.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:35.452Z,1478891915.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:35.561Z,1478891915.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:35.973Z,1478891915.973 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:35.973Z,1478891915.973 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 269
2016-11-11T19:18:35.973Z,1478891915.973 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:18:35.980Z,1478891915.980 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:35.980Z,1478891915.980 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 269
2016-11-11T19:18:35.980Z,1478891915.980 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:18:35.982Z,1478891915.982 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:35.982Z,1478891915.982 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 269
2016-11-11T19:18:35.982Z,1478891915.982 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:18:35.996Z,1478891915.996 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:18:35.997Z,1478891915.997 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:18:35.997Z,1478891915.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:18:36.220Z,1478891916.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:36.382Z,1478891916.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:18:36.382Z,1478891916.382 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 269
2016-11-11T19:18:36.387Z,1478891916.387 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:18:36.387Z,1478891916.387 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 269
2016-11-11T19:18:36.388Z,1478891916.388 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:18:36.388Z,1478891916.388 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 269
2016-11-11T19:18:36.756Z,1478891916.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:18:36.756Z,1478891916.756 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:18:36.757Z,1478891916.757 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:18:36.761Z,1478891916.761 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:18:36.762Z,1478891916.762 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:18:36.762Z,1478891916.762 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:18:36.763Z,1478891916.763 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:18:36.763Z,1478891916.763 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:18:36.764Z,1478891916.764 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:18:37.016Z,1478891917.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:37.171Z,1478891917.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:37.556Z,1478891917.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:37.820Z,1478891917.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:37.973Z,1478891917.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:38.236Z,1478891918.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:38.365Z,1478891918.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:38.763Z,1478891918.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:39.032Z,1478891919.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:39.186Z,1478891919.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:39.573Z,1478891919.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:39.736Z,1478891919.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:39.975Z,1478891919.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:40.372Z,1478891920.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:40.532Z,1478891920.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:40.765Z,1478891920.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:41.185Z,1478891921.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:41.329Z,1478891921.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:41.601Z,1478891921.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:41.740Z,1478891921.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:41.973Z,1478891921.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:42.364Z,1478891922.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:42.536Z,1478891922.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:42.777Z,1478891922.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:43.171Z,1478891923.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:43.338Z,1478891923.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:43.590Z,1478891923.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:43.772Z,1478891923.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:44.009Z,1478891924.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:44.400Z,1478891924.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:44.568Z,1478891924.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:44.767Z,1478891924.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:45.171Z,1478891925.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:45.364Z,1478891925.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:45.599Z,1478891925.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:45.772Z,1478891925.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:45.950Z,1478891925.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:46.352Z,1478891926.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:46.568Z,1478891926.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:46.761Z,1478891926.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:47.158Z,1478891927.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:47.364Z,1478891927.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:47.597Z,1478891927.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:47.836Z,1478891927.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:47.956Z,1478891927.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:48.373Z,1478891928.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:48.632Z,1478891928.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:48.769Z,1478891928.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:49.201Z,1478891929.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:49.428Z,1478891929.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:49.597Z,1478891929.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:49.973Z,1478891929.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:50.192Z,1478891930.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:50.373Z,1478891930.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:50.769Z,1478891930.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:50.988Z,1478891930.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:51.162Z,1478891931.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:51.564Z,1478891931.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:51.785Z,1478891931.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:51.961Z,1478891931.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:52.196Z,1478891932.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:52.363Z,1478891932.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:52.747Z,1478891932.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:52.992Z,1478891932.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:53.147Z,1478891933.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:53.558Z,1478891933.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:53.720Z,1478891933.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:53.953Z,1478891933.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:54.365Z,1478891934.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:54.516Z,1478891934.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:54.793Z,1478891934.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:55.169Z,1478891935.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:55.317Z,1478891935.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:55.577Z,1478891935.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:55.748Z,1478891935.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:55.997Z,1478891935.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:56.366Z,1478891936.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:56.544Z,1478891936.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:56.800Z,1478891936.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:57.161Z,1478891937.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:57.340Z,1478891937.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:57.594Z,1478891937.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:57.748Z,1478891937.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:57.956Z,1478891937.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:58.399Z,1478891938.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:58.544Z,1478891938.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:58.766Z,1478891938.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:59.156Z,1478891939.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:59.340Z,1478891939.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:59.571Z,1478891939.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:18:59.748Z,1478891939.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:18:59.973Z,1478891939.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:00.397Z,1478891940.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:00.544Z,1478891940.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:00.790Z,1478891940.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:01.165Z,1478891941.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:01.340Z,1478891941.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:01.588Z,1478891941.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:01.963Z,1478891941.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:02.136Z,1478891942.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:02.392Z,1478891942.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:02.754Z,1478891942.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:02.935Z,1478891942.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:03.159Z,1478891943.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:03.562Z,1478891943.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:03.733Z,1478891943.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:03.973Z,1478891943.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:04.168Z,1478891944.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:04.385Z,1478891944.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:04.746Z,1478891944.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:04.964Z,1478891944.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:05.167Z,1478891945.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:05.581Z,1478891945.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:05.761Z,1478891945.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:06.004Z,1478891946.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:06.176Z,1478891946.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:06.378Z,1478891946.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:06.774Z,1478891946.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:06.972Z,1478891946.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:07.177Z,1478891947.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:07.558Z,1478891947.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:07.696Z,1478891947.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:07.969Z,1478891947.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:08.399Z,1478891948.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:08.492Z,1478891948.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:08.756Z,1478891948.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:09.156Z,1478891949.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:09.289Z,1478891949.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:09.601Z,1478891949.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:09.700Z,1478891949.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:09.956Z,1478891949.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:10.385Z,1478891950.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:10.496Z,1478891950.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:10.763Z,1478891950.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:11.178Z,1478891951.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:11.293Z,1478891951.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:11.582Z,1478891951.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:11.708Z,1478891951.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:11.994Z,1478891951.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:12.401Z,1478891952.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:12.506Z,1478891952.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:12.780Z,1478891952.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:13.161Z,1478891953.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:13.312Z,1478891953.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:13.548Z,1478891953.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:13.724Z,1478891953.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:13.951Z,1478891953.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:14.354Z,1478891954.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:14.520Z,1478891954.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:14.752Z,1478891954.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:15.153Z,1478891955.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:15.316Z,1478891955.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:15.562Z,1478891955.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:15.796Z,1478891955.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:15.965Z,1478891955.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:16.364Z,1478891956.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:16.592Z,1478891956.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:16.789Z,1478891956.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:17.201Z,1478891957.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:17.389Z,1478891957.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:17.607Z,1478891957.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:17.969Z,1478891957.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:18.148Z,1478891958.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:18.365Z,1478891958.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:18.763Z,1478891958.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:18.944Z,1478891958.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:19.169Z,1478891959.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:19.548Z,1478891959.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:19.741Z,1478891959.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:19.953Z,1478891959.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:20.152Z,1478891960.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:20.381Z,1478891960.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:20.766Z,1478891960.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:20.948Z,1478891960.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:21.201Z,1478891961.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:21.574Z,1478891961.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:21.688Z,1478891961.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:21.984Z,1478891961.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:22.377Z,1478891962.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:22.484Z,1478891962.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:22.824Z,1478891962.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:23.205Z,1478891963.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:23.281Z,1478891963.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:23.561Z,1478891963.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:23.692Z,1478891963.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:23.965Z,1478891963.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:24.381Z,1478891964.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:24.489Z,1478891964.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:24.764Z,1478891964.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:25.181Z,1478891965.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:25.285Z,1478891965.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:25.563Z,1478891965.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:25.696Z,1478891965.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:26.493Z,1478891966.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:27.289Z,1478891967.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:27.700Z,1478891967.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:28.496Z,1478891968.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:28.964Z,1478891968.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:29.097Z,1478891969.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:29.292Z,1478891969.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:29.477Z,1478891969.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:29.764Z,1478891969.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:29.862Z,1478891969.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:30.241Z,1478891970.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:30.560Z,1478891970.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:30.649Z,1478891970.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:31.053Z,1478891971.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:31.356Z,1478891971.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:31.447Z,1478891971.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:31.845Z,1478891971.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:32.124Z,1478891972.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:32.245Z,1478891972.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:32.641Z,1478891972.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:32.920Z,1478891972.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:33.047Z,1478891973.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:33.453Z,1478891973.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:33.717Z,1478891973.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:33.857Z,1478891973.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:34.128Z,1478891974.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:34.261Z,1478891974.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:34.665Z,1478891974.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:34.924Z,1478891974.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:35.051Z,1478891975.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:35.451Z,1478891975.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:35.656Z,1478891975.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:35.853Z,1478891975.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:36.237Z,1478891976.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:36.452Z,1478891976.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:36.635Z,1478891976.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:37.036Z,1478891977.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:37.249Z,1478891977.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:37.445Z,1478891977.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:37.668Z,1478891977.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:37.845Z,1478891977.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:38.237Z,1478891978.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:38.464Z,1478891978.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:38.653Z,1478891978.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:39.053Z,1478891979.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:39.268Z,1478891979.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:39.457Z,1478891979.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:39.688Z,1478891979.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:39.837Z,1478891979.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:40.243Z,1478891980.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:40.484Z,1478891980.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:40.690Z,1478891980.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:41.056Z,1478891981.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:41.280Z,1478891981.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:41.473Z,1478891981.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:41.688Z,1478891981.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:41.849Z,1478891981.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:42.265Z,1478891982.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:42.486Z,1478891982.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:42.655Z,1478891982.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:43.066Z,1478891983.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:43.280Z,1478891983.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:43.461Z,1478891983.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:43.764Z,1478891983.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:43.841Z,1478891983.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:44.237Z,1478891984.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:44.560Z,1478891984.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:44.651Z,1478891984.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:45.045Z,1478891985.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:45.356Z,1478891985.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:45.445Z,1478891985.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:45.841Z,1478891985.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:46.104Z,1478891986.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:46.241Z,1478891986.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:46.636Z,1478891986.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:46.900Z,1478891986.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:47.046Z,1478891987.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:47.440Z,1478891987.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:47.705Z,1478891987.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:47.837Z,1478891987.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:48.132Z,1478891988.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:48.246Z,1478891988.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:48.639Z,1478891988.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:48.928Z,1478891988.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:49.041Z,1478891989.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:49.450Z,1478891989.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:49.620Z,1478891989.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:49.853Z,1478891989.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:50.241Z,1478891990.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:50.416Z,1478891990.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:50.638Z,1478891990.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:51.045Z,1478891991.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:51.214Z,1478891991.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:51.453Z,1478891991.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:51.644Z,1478891991.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:51.853Z,1478891991.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:52.233Z,1478891992.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:52.440Z,1478891992.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:52.633Z,1478891992.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:53.037Z,1478891993.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:53.237Z,1478891993.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:53.461Z,1478891993.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:53.652Z,1478891993.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:53.862Z,1478891993.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:54.269Z,1478891994.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:54.448Z,1478891994.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:54.645Z,1478891994.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:55.041Z,1478891995.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:55.245Z,1478891995.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:55.481Z,1478891995.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:55.656Z,1478891995.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:55.849Z,1478891995.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:56.245Z,1478891996.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:56.452Z,1478891996.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:56.661Z,1478891996.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:57.045Z,1478891997.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:57.248Z,1478891997.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:57.493Z,1478891997.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:57.744Z,1478891997.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:57.889Z,1478891997.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:58.250Z,1478891998.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:58.540Z,1478891998.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:58.640Z,1478891998.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:59.052Z,1478891999.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:59.336Z,1478891999.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:19:59.452Z,1478891999.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:19:59.857Z,1478891999.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:00.072Z,1478892000.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:00.253Z,1478892000.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:00.633Z,1478892000.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:00.868Z,1478892000.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:01.037Z,1478892001.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:01.437Z,1478892001.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:01.665Z,1478892001.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:01.845Z,1478892001.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:02.076Z,1478892002.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:02.243Z,1478892002.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:02.653Z,1478892002.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:02.872Z,1478892002.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:03.037Z,1478892003.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:03.461Z,1478892003.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:03.600Z,1478892003.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:03.837Z,1478892003.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:04.237Z,1478892004.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:04.399Z,1478892004.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:04.637Z,1478892004.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:05.040Z,1478892005.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:05.202Z,1478892005.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:05.445Z,1478892005.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:05.632Z,1478892005.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:05.837Z,1478892005.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:06.241Z,1478892006.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:06.428Z,1478892006.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:06.647Z,1478892006.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:07.049Z,1478892007.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:07.224Z,1478892007.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:07.433Z,1478892007.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:07.632Z,1478892007.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:07.837Z,1478892007.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:08.237Z,1478892008.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:08.428Z,1478892008.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:08.645Z,1478892008.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:09.041Z,1478892009.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:09.224Z,1478892009.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:09.445Z,1478892009.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:09.632Z,1478892009.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:09.837Z,1478892009.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:10.285Z,1478892010.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:10.428Z,1478892010.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:10.648Z,1478892010.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:11.052Z,1478892011.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:11.224Z,1478892011.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:11.485Z,1478892011.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:11.708Z,1478892011.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:11.847Z,1478892011.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:12.266Z,1478892012.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:12.504Z,1478892012.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:12.670Z,1478892012.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:13.045Z,1478892013.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:13.300Z,1478892013.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:13.445Z,1478892013.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:13.844Z,1478892013.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:14.052Z,1478892014.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:14.247Z,1478892014.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:14.644Z,1478892014.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:14.848Z,1478892014.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:15.041Z,1478892015.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:15.445Z,1478892015.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:15.645Z,1478892015.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:15.844Z,1478892015.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:16.060Z,1478892016.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:16.245Z,1478892016.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:16.645Z,1478892016.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:16.856Z,1478892016.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:17.043Z,1478892017.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:17.444Z,1478892017.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:17.584Z,1478892017.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:17.844Z,1478892017.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:18.245Z,1478892018.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:18.380Z,1478892018.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:18.647Z,1478892018.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:19.049Z,1478892019.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:19.192Z,1478892019.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:19.456Z,1478892019.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:19.612Z,1478892019.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:19.850Z,1478892019.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:20.257Z,1478892020.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:20.408Z,1478892020.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:20.647Z,1478892020.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:21.049Z,1478892021.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:21.204Z,1478892021.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:21.448Z,1478892021.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:21.612Z,1478892021.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:21.849Z,1478892021.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:22.258Z,1478892022.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:22.408Z,1478892022.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:22.662Z,1478892022.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:23.037Z,1478892023.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:23.204Z,1478892023.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:23.461Z,1478892023.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:23.612Z,1478892023.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:23.836Z,1478892023.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:24.241Z,1478892024.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:24.408Z,1478892024.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:24.681Z,1478892024.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:25.054Z,1478892025.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:25.205Z,1478892025.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:25.444Z,1478892025.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:25.692Z,1478892025.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:25.845Z,1478892025.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:26.488Z,1478892026.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:27.284Z,1478892027.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:28.044Z,1478892028.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:28.841Z,1478892028.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:29.337Z,1478892029.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:29.482Z,1478892029.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:29.637Z,1478892029.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:29.845Z,1478892029.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:30.048Z,1478892030.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:30.245Z,1478892030.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:30.613Z,1478892030.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:30.844Z,1478892030.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:31.013Z,1478892031.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:31.411Z,1478892031.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:31.560Z,1478892031.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:31.812Z,1478892031.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:32.216Z,1478892032.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:32.356Z,1478892032.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:32.612Z,1478892032.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:33.014Z,1478892033.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:33.153Z,1478892033.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:33.412Z,1478892033.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:33.568Z,1478892033.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:33.823Z,1478892033.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:34.217Z,1478892034.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:34.365Z,1478892034.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:34.617Z,1478892034.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:35.024Z,1478892035.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:35.161Z,1478892035.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:35.412Z,1478892035.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:35.572Z,1478892035.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:35.817Z,1478892035.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:36.220Z,1478892036.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:36.368Z,1478892036.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:36.626Z,1478892036.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:37.026Z,1478892037.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:37.165Z,1478892037.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:37.421Z,1478892037.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:37.580Z,1478892037.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:37.817Z,1478892037.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:38.224Z,1478892038.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:38.376Z,1478892038.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:38.626Z,1478892038.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:39.024Z,1478892039.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:39.172Z,1478892039.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:39.424Z,1478892039.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:39.676Z,1478892039.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:39.826Z,1478892039.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:40.225Z,1478892040.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:40.472Z,1478892040.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:40.625Z,1478892040.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:41.033Z,1478892041.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:41.268Z,1478892041.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:41.427Z,1478892041.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:41.824Z,1478892041.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:42.016Z,1478892042.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:42.256Z,1478892042.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:42.637Z,1478892042.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:42.812Z,1478892042.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:43.037Z,1478892043.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:43.435Z,1478892043.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:43.609Z,1478892043.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:43.845Z,1478892043.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:44.020Z,1478892044.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:44.213Z,1478892044.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:44.644Z,1478892044.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:44.816Z,1478892044.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:45.042Z,1478892045.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:45.425Z,1478892045.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:45.552Z,1478892045.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:45.813Z,1478892045.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:46.220Z,1478892046.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:46.348Z,1478892046.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:46.613Z,1478892046.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:47.017Z,1478892047.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:47.145Z,1478892047.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:47.421Z,1478892047.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:47.556Z,1478892047.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:47.815Z,1478892047.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:48.217Z,1478892048.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:48.352Z,1478892048.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:48.621Z,1478892048.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:49.017Z,1478892049.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:49.149Z,1478892049.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:49.424Z,1478892049.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:49.560Z,1478892049.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:49.814Z,1478892049.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:50.221Z,1478892050.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:50.356Z,1478892050.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:50.623Z,1478892050.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:51.013Z,1478892051.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:51.154Z,1478892051.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:51.425Z,1478892051.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:51.568Z,1478892051.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:51.809Z,1478892051.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:52.209Z,1478892052.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:52.364Z,1478892052.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:52.613Z,1478892052.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:53.013Z,1478892053.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:53.160Z,1478892053.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:53.417Z,1478892053.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:53.632Z,1478892053.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:53.817Z,1478892053.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:54.214Z,1478892054.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:54.428Z,1478892054.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:54.617Z,1478892054.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:55.016Z,1478892055.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:55.224Z,1478892055.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:55.421Z,1478892055.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:55.813Z,1478892055.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:55.988Z,1478892055.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:56.217Z,1478892056.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:56.624Z,1478892056.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:56.784Z,1478892056.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:57.073Z,1478892057.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:57.424Z,1478892057.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:57.581Z,1478892057.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:57.824Z,1478892057.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:57.992Z,1478892057.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:58.241Z,1478892058.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:58.625Z,1478892058.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:58.788Z,1478892058.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:59.042Z,1478892059.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:59.441Z,1478892059.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:20:59.516Z,1478892059.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:20:59.812Z,1478892059.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:00.221Z,1478892060.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:00.312Z,1478892060.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:00.613Z,1478892060.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:01.021Z,1478892061.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:01.109Z,1478892061.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:01.423Z,1478892061.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:01.520Z,1478892061.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:01.813Z,1478892061.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:02.225Z,1478892062.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:02.316Z,1478892062.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:02.623Z,1478892062.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:03.014Z,1478892063.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:03.113Z,1478892063.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:03.424Z,1478892063.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:03.528Z,1478892063.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:03.774Z,1478892063.774 [NAL9602](INFO): SBD MO Status=2, MOMSN=356, MT Status=2, MTMSN=0
2016-11-11T19:21:03.774Z,1478892063.774 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T19:21:03.847Z,1478892063.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:04.229Z,1478892064.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:04.324Z,1478892064.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:04.621Z,1478892064.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:05.005Z,1478892065.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:05.120Z,1478892065.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:05.409Z,1478892065.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:05.532Z,1478892065.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:05.813Z,1478892065.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:06.211Z,1478892066.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:06.329Z,1478892066.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:06.616Z,1478892066.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:07.021Z,1478892067.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:07.124Z,1478892067.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:07.417Z,1478892067.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:07.608Z,1478892067.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:07.822Z,1478892067.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:08.229Z,1478892068.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:08.404Z,1478892068.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:08.633Z,1478892068.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:09.017Z,1478892069.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:09.200Z,1478892069.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:09.425Z,1478892069.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:09.825Z,1478892069.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:09.968Z,1478892069.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:10.221Z,1478892070.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:10.621Z,1478892070.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:10.764Z,1478892070.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:11.025Z,1478892071.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:11.474Z,1478892071.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:11.560Z,1478892071.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:11.861Z,1478892071.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:11.984Z,1478892071.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:12.211Z,1478892072.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:12.613Z,1478892072.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:12.780Z,1478892072.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:13.049Z,1478892073.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:13.412Z,1478892073.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:13.508Z,1478892073.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:13.853Z,1478892073.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:14.249Z,1478892074.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:14.305Z,1478892074.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:14.617Z,1478892074.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:15.013Z,1478892075.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:15.101Z,1478892075.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:15.420Z,1478892075.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:15.512Z,1478892075.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:15.814Z,1478892075.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:16.214Z,1478892076.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:16.308Z,1478892076.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:16.617Z,1478892076.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:17.015Z,1478892077.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:17.105Z,1478892077.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:17.416Z,1478892077.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:17.516Z,1478892077.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:17.824Z,1478892077.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:18.226Z,1478892078.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:18.312Z,1478892078.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:18.623Z,1478892078.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:19.024Z,1478892079.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:19.109Z,1478892079.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:19.416Z,1478892079.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:19.520Z,1478892079.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:19.819Z,1478892079.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:20.215Z,1478892080.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:20.316Z,1478892080.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:20.613Z,1478892080.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:21.019Z,1478892081.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:21.112Z,1478892081.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:21.421Z,1478892081.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:21.608Z,1478892081.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:21.829Z,1478892081.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:22.222Z,1478892082.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:22.404Z,1478892082.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:22.620Z,1478892082.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:23.025Z,1478892083.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:23.202Z,1478892083.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:23.423Z,1478892083.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:23.823Z,1478892083.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:23.948Z,1478892083.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:24.228Z,1478892084.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:24.625Z,1478892084.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:24.744Z,1478892084.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:25.009Z,1478892085.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:25.043Z,1478892085.043 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T19:16:24.9Z
2016-11-11T19:21:25.043Z,1478892085.043 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T19:21:25.043Z,1478892085.043 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T19:21:25.426Z,1478892085.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:25.544Z,1478892085.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:25.956Z,1478892085.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:26.352Z,1478892086.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:26.461Z,1478892086.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:26.752Z,1478892086.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:27.488Z,1478892087.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:28.285Z,1478892088.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:29.081Z,1478892089.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:29.492Z,1478892089.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:30.134Z,1478892090.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:30.179Z,1478892090.179 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0336.lzma
2016-11-11T19:21:30.278Z,1478892090.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:30.288Z,1478892090.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:30.678Z,1478892090.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:30.982Z,1478892090.982 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0336.lzma.bak
2016-11-11T19:21:30.982Z,1478892090.982 [DataOverHttps](INFO): SBD MOMSN=4555687
2016-11-11T19:21:31.085Z,1478892091.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:31.129Z,1478892091.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:31.496Z,1478892091.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:32.292Z,1478892092.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:32.402Z,1478892092.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:32.540Z,1478892092.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:33.089Z,1478892093.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:33.496Z,1478892093.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:34.292Z,1478892094.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:35.088Z,1478892095.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:35.572Z,1478892095.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:36.005Z,1478892096.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:36.152Z,1478892096.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:36.368Z,1478892096.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:36.487Z,1478892096.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:36.889Z,1478892096.889 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:36.889Z,1478892096.889 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 270
2016-11-11T19:21:36.889Z,1478892096.889 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:21:36.925Z,1478892096.925 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:36.925Z,1478892096.925 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 270
2016-11-11T19:21:36.925Z,1478892096.925 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:21:36.927Z,1478892096.927 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:36.927Z,1478892096.927 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 270
2016-11-11T19:21:36.927Z,1478892096.927 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:21:36.953Z,1478892096.953 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:21:36.953Z,1478892096.953 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:21:36.953Z,1478892096.954 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:21:37.164Z,1478892097.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:37.330Z,1478892097.330 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:21:37.330Z,1478892097.330 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 270
2016-11-11T19:21:37.335Z,1478892097.335 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:21:37.335Z,1478892097.335 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 270
2016-11-11T19:21:37.336Z,1478892097.336 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:21:37.336Z,1478892097.336 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 270
2016-11-11T19:21:37.682Z,1478892097.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:21:37.683Z,1478892097.683 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:21:37.683Z,1478892097.684 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:21:37.688Z,1478892097.688 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:21:37.689Z,1478892097.689 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:21:37.689Z,1478892097.689 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:21:37.689Z,1478892097.690 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:21:37.690Z,1478892097.690 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:21:37.690Z,1478892097.690 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:21:37.912Z,1478892097.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:38.708Z,1478892098.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:39.505Z,1478892099.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:39.916Z,1478892099.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:40.712Z,1478892100.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:41.091Z,1478892101.091 [DataOverHttps](INFO): Sending 233 bytes from file Logs/20161111T044527/Express0337.lzma
2016-11-11T19:21:41.162Z,1478892101.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:41.313Z,1478892101.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:41.444Z,1478892101.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:41.622Z,1478892101.622 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0337.lzma.bak
2016-11-11T19:21:41.622Z,1478892101.622 [DataOverHttps](INFO): SBD MOMSN=4555689
2016-11-11T19:21:41.684Z,1478892101.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:42.240Z,1478892102.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:42.907Z,1478892102.907 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T19:21:43.027Z,1478892103.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:43.036Z,1478892103.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:43.081Z,1478892103.081 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T19:21:43.081Z,1478892103.081 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T19:21:43.081Z,1478892103.081 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T19:21:43.215Z,1478892103.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:43.452Z,1478892103.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:44.248Z,1478892104.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:45.045Z,1478892105.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:45.536Z,1478892105.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:46.332Z,1478892106.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:46.669Z,1478892106.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:46.786Z,1478892106.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:47.128Z,1478892107.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:47.257Z,1478892107.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:47.539Z,1478892107.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:47.589Z,1478892107.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:48.013Z,1478892108.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:48.332Z,1478892108.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:48.368Z,1478892108.368 [NAL9602](INFO): Powering down
2016-11-11T19:21:48.453Z,1478892108.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:48.821Z,1478892108.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:49.128Z,1478892109.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:49.214Z,1478892109.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:49.590Z,1478892109.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:49.596Z,1478892109.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:50.005Z,1478892110.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:50.396Z,1478892110.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:50.405Z,1478892110.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:50.818Z,1478892110.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:51.189Z,1478892111.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:51.192Z,1478892111.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:51.583Z,1478892111.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:51.884Z,1478892111.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:51.979Z,1478892111.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:52.394Z,1478892112.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:52.680Z,1478892112.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:52.801Z,1478892112.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:53.205Z,1478892113.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:53.477Z,1478892113.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:53.573Z,1478892113.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:53.888Z,1478892113.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:53.978Z,1478892113.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:54.373Z,1478892114.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:54.684Z,1478892114.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:54.769Z,1478892114.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:55.165Z,1478892115.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:55.412Z,1478892115.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:55.581Z,1478892115.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:55.969Z,1478892115.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:56.209Z,1478892116.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:56.431Z,1478892116.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:56.769Z,1478892116.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:57.005Z,1478892117.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:57.171Z,1478892117.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:57.573Z,1478892117.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:57.800Z,1478892117.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:57.969Z,1478892117.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:58.370Z,1478892118.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:58.596Z,1478892118.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:58.770Z,1478892118.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:59.200Z,1478892119.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:59.392Z,1478892119.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:21:59.573Z,1478892119.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:21:59.996Z,1478892119.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:00.188Z,1478892120.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:00.458Z,1478892120.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:00.794Z,1478892120.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:00.985Z,1478892120.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:01.193Z,1478892121.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:01.464Z,1478892121.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:01.586Z,1478892121.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:01.872Z,1478892121.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:01.993Z,1478892121.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:02.280Z,1478892122.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:02.397Z,1478892122.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:02.773Z,1478892122.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:03.077Z,1478892123.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:03.211Z,1478892123.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:03.576Z,1478892123.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:03.598Z,1478892123.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:03.985Z,1478892123.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:04.372Z,1478892124.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:04.397Z,1478892124.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:04.777Z,1478892124.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:05.169Z,1478892125.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:05.205Z,1478892125.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:05.596Z,1478892125.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:05.864Z,1478892125.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:05.977Z,1478892125.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:06.447Z,1478892126.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:06.660Z,1478892126.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:06.793Z,1478892126.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:07.180Z,1478892127.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:07.458Z,1478892127.458 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:07.581Z,1478892127.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:07.892Z,1478892127.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:07.000Z,1478892128.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:08.374Z,1478892128.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:08.688Z,1478892128.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:08.785Z,1478892128.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:09.185Z,1478892129.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:09.396Z,1478892129.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:09.586Z,1478892129.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:10.002Z,1478892130.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:10.193Z,1478892130.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:10.407Z,1478892130.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:10.775Z,1478892130.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:10.989Z,1478892130.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:11.214Z,1478892131.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:11.416Z,1478892131.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:11.589Z,1478892131.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:11.995Z,1478892131.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:12.212Z,1478892132.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:12.366Z,1478892132.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:12.822Z,1478892132.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:13.008Z,1478892133.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:13.198Z,1478892133.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:13.416Z,1478892133.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:13.584Z,1478892133.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:14.025Z,1478892134.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:14.212Z,1478892134.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:14.374Z,1478892134.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:14.826Z,1478892134.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:15.008Z,1478892135.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:15.170Z,1478892135.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:15.416Z,1478892135.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:15.577Z,1478892135.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:16.048Z,1478892136.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:16.212Z,1478892136.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:16.389Z,1478892136.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:16.822Z,1478892136.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:17.008Z,1478892137.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:17.242Z,1478892137.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:17.496Z,1478892137.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:17.601Z,1478892137.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:17.991Z,1478892137.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:18.292Z,1478892138.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:18.386Z,1478892138.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:18.780Z,1478892138.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:19.088Z,1478892139.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:19.190Z,1478892139.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:19.595Z,1478892139.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:19.840Z,1478892139.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:19.996Z,1478892139.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:20.386Z,1478892140.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:20.636Z,1478892140.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:20.778Z,1478892140.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:21.189Z,1478892141.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:21.433Z,1478892141.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:21.590Z,1478892141.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:21.852Z,1478892141.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:21.970Z,1478892141.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:22.381Z,1478892142.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:22.648Z,1478892142.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:22.789Z,1478892142.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:23.187Z,1478892143.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:23.365Z,1478892143.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:23.590Z,1478892143.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:23.986Z,1478892143.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:24.160Z,1478892144.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:24.389Z,1478892144.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:24.789Z,1478892144.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:24.957Z,1478892144.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:25.187Z,1478892145.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:25.376Z,1478892145.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:25.589Z,1478892145.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:26.005Z,1478892146.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:26.173Z,1478892146.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:26.402Z,1478892146.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:26.798Z,1478892146.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:26.969Z,1478892146.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:27.176Z,1478892147.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:27.581Z,1478892147.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:27.764Z,1478892147.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:27.980Z,1478892147.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:28.371Z,1478892148.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:28.560Z,1478892148.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:28.772Z,1478892148.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:29.190Z,1478892149.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:29.360Z,1478892149.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:29.590Z,1478892149.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:29.974Z,1478892149.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:30.158Z,1478892150.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:30.381Z,1478892150.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:30.814Z,1478892150.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:30.952Z,1478892150.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:31.172Z,1478892151.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:31.456Z,1478892151.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:31.614Z,1478892151.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:32.002Z,1478892152.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:32.252Z,1478892152.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:32.374Z,1478892152.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:32.783Z,1478892152.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:33.048Z,1478892153.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:33.185Z,1478892153.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:33.588Z,1478892153.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:33.844Z,1478892153.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:33.983Z,1478892153.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:34.369Z,1478892154.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:34.472Z,1478892154.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:34.764Z,1478892154.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:35.177Z,1478892155.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:35.268Z,1478892155.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:35.581Z,1478892155.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:35.816Z,1478892155.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:35.973Z,1478892155.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:36.377Z,1478892156.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:36.612Z,1478892156.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:36.775Z,1478892156.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:37.171Z,1478892157.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:37.344Z,1478892157.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:37.586Z,1478892157.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:37.975Z,1478892157.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:38.140Z,1478892158.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:38.372Z,1478892158.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:38.781Z,1478892158.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:38.937Z,1478892158.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:39.177Z,1478892159.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:39.576Z,1478892159.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:39.732Z,1478892159.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:39.985Z,1478892159.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:40.385Z,1478892160.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:40.528Z,1478892160.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:40.774Z,1478892160.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:41.182Z,1478892161.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:41.324Z,1478892161.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:41.576Z,1478892161.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:41.974Z,1478892161.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:42.120Z,1478892162.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:42.385Z,1478892162.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:42.799Z,1478892162.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:42.916Z,1478892162.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:43.164Z,1478892163.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:43.712Z,1478892163.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:43.729Z,1478892163.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:44.508Z,1478892164.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:45.305Z,1478892165.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:46.100Z,1478892166.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:46.896Z,1478892166.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:47.041Z,1478892167.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:47.177Z,1478892167.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:47.540Z,1478892167.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:47.692Z,1478892167.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:47.974Z,1478892167.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:48.336Z,1478892168.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:48.488Z,1478892168.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:48.771Z,1478892168.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:49.173Z,1478892169.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:49.284Z,1478892169.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:49.544Z,1478892169.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:49.937Z,1478892169.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:50.080Z,1478892170.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:50.347Z,1478892170.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:50.738Z,1478892170.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:50.876Z,1478892170.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:51.145Z,1478892171.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:51.573Z,1478892171.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:51.672Z,1478892171.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:51.944Z,1478892171.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:52.349Z,1478892172.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:52.468Z,1478892172.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:52.749Z,1478892172.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:53.144Z,1478892173.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:53.264Z,1478892173.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:53.553Z,1478892173.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:53.928Z,1478892173.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:54.060Z,1478892174.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:54.333Z,1478892174.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:54.737Z,1478892174.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:54.856Z,1478892174.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:55.141Z,1478892175.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:55.535Z,1478892175.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:55.652Z,1478892175.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:55.941Z,1478892175.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:56.337Z,1478892176.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:56.448Z,1478892176.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:56.739Z,1478892176.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:57.140Z,1478892177.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:57.244Z,1478892177.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:57.537Z,1478892177.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:57.949Z,1478892177.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:58.040Z,1478892178.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:58.345Z,1478892178.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:58.448Z,1478892178.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:58.786Z,1478892178.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:58.856Z,1478892178.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:59.144Z,1478892179.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:59.264Z,1478892179.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:59.553Z,1478892179.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:22:59.674Z,1478892179.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:22:59.944Z,1478892179.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:00.084Z,1478892180.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:00.341Z,1478892180.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:00.492Z,1478892180.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:00.755Z,1478892180.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:00.900Z,1478892180.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:01.166Z,1478892181.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:01.308Z,1478892181.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:01.561Z,1478892181.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:01.720Z,1478892181.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:01.945Z,1478892181.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:02.128Z,1478892182.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:02.370Z,1478892182.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:02.540Z,1478892182.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:02.735Z,1478892182.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:02.948Z,1478892182.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:03.169Z,1478892183.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:03.570Z,1478892183.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:03.744Z,1478892183.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:03.935Z,1478892183.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:04.152Z,1478892184.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:04.339Z,1478892184.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:04.734Z,1478892184.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:04.948Z,1478892184.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:05.135Z,1478892185.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:05.356Z,1478892185.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:05.556Z,1478892185.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:05.949Z,1478892185.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:06.152Z,1478892186.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:06.338Z,1478892186.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:06.744Z,1478892186.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:06.948Z,1478892186.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:07.144Z,1478892187.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:07.356Z,1478892187.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:07.538Z,1478892187.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:07.944Z,1478892187.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:08.152Z,1478892188.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:08.358Z,1478892188.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:08.739Z,1478892188.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:08.948Z,1478892188.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:09.134Z,1478892189.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:09.360Z,1478892189.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:09.535Z,1478892189.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:09.935Z,1478892189.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:10.158Z,1478892190.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:10.334Z,1478892190.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:10.734Z,1478892190.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:10.952Z,1478892190.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:11.134Z,1478892191.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:11.364Z,1478892191.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:11.534Z,1478892191.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:11.945Z,1478892191.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:12.162Z,1478892192.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:12.336Z,1478892192.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:12.735Z,1478892192.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:12.957Z,1478892192.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:13.143Z,1478892193.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:13.392Z,1478892193.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:13.535Z,1478892193.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:13.951Z,1478892193.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:14.188Z,1478892194.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:14.344Z,1478892194.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:14.738Z,1478892194.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:14.984Z,1478892194.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:15.141Z,1478892195.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:15.597Z,1478892195.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:15.752Z,1478892195.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:15.969Z,1478892195.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:16.354Z,1478892196.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:16.548Z,1478892196.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:16.758Z,1478892196.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:17.153Z,1478892197.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:17.345Z,1478892197.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:17.560Z,1478892197.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:17.756Z,1478892197.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:17.969Z,1478892197.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:18.328Z,1478892198.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:18.552Z,1478892198.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:18.733Z,1478892198.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:19.140Z,1478892199.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:19.280Z,1478892199.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:19.535Z,1478892199.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:19.948Z,1478892199.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:20.076Z,1478892200.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:20.339Z,1478892200.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:20.735Z,1478892200.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:20.873Z,1478892200.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:21.142Z,1478892201.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:21.284Z,1478892201.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:21.549Z,1478892201.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:21.936Z,1478892201.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:22.080Z,1478892202.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:22.344Z,1478892202.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:22.753Z,1478892202.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:22.888Z,1478892202.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:23.144Z,1478892203.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:23.304Z,1478892203.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:23.547Z,1478892203.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:23.941Z,1478892203.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:24.100Z,1478892204.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:24.348Z,1478892204.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:24.747Z,1478892204.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:24.896Z,1478892204.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:25.146Z,1478892205.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:25.304Z,1478892205.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:25.548Z,1478892205.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:25.954Z,1478892205.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:26.100Z,1478892206.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:26.356Z,1478892206.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:26.751Z,1478892206.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:26.896Z,1478892206.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:27.157Z,1478892207.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:27.372Z,1478892207.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:27.553Z,1478892207.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:27.945Z,1478892207.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:28.168Z,1478892208.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:28.344Z,1478892208.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:28.736Z,1478892208.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:28.964Z,1478892208.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:29.142Z,1478892209.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:29.541Z,1478892209.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:29.732Z,1478892209.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:29.993Z,1478892209.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:30.338Z,1478892210.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:30.528Z,1478892210.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:30.766Z,1478892210.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:31.149Z,1478892211.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:31.340Z,1478892211.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:31.561Z,1478892211.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:31.752Z,1478892211.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:31.948Z,1478892211.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:32.361Z,1478892212.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:32.548Z,1478892212.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:32.748Z,1478892212.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:33.140Z,1478892213.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:33.272Z,1478892213.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:33.541Z,1478892213.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:33.935Z,1478892213.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:34.068Z,1478892214.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:34.343Z,1478892214.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:34.744Z,1478892214.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:34.865Z,1478892214.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:35.144Z,1478892215.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:35.280Z,1478892215.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:35.543Z,1478892215.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:35.948Z,1478892215.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:36.076Z,1478892216.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:36.348Z,1478892216.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:36.747Z,1478892216.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:36.873Z,1478892216.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:37.133Z,1478892217.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:37.286Z,1478892217.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:37.553Z,1478892217.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:37.944Z,1478892217.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:38.080Z,1478892218.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:38.342Z,1478892218.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:38.735Z,1478892218.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:38.877Z,1478892218.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:39.149Z,1478892219.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:39.284Z,1478892219.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:39.539Z,1478892219.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:39.936Z,1478892219.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:40.080Z,1478892220.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:40.341Z,1478892220.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:40.735Z,1478892220.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:40.876Z,1478892220.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:41.149Z,1478892221.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:41.348Z,1478892221.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:41.535Z,1478892221.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:41.946Z,1478892221.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:42.144Z,1478892222.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:42.336Z,1478892222.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:42.738Z,1478892222.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:42.940Z,1478892222.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:43.145Z,1478892223.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:43.536Z,1478892223.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:43.708Z,1478892223.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:43.961Z,1478892223.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:44.504Z,1478892224.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:45.302Z,1478892225.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:45.712Z,1478892225.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:46.508Z,1478892226.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:47.244Z,1478892227.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:47.397Z,1478892227.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:47.529Z,1478892227.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:47.922Z,1478892227.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:48.040Z,1478892228.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:48.305Z,1478892228.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:48.748Z,1478892228.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:48.837Z,1478892228.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:49.129Z,1478892229.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:49.256Z,1478892229.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:49.509Z,1478892229.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:49.901Z,1478892229.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:50.052Z,1478892230.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:50.301Z,1478892230.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:50.701Z,1478892230.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:50.849Z,1478892230.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:51.101Z,1478892231.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:51.260Z,1478892231.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:51.501Z,1478892231.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:51.900Z,1478892231.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:52.056Z,1478892232.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:52.302Z,1478892232.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:52.701Z,1478892232.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:52.857Z,1478892232.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:53.104Z,1478892233.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:53.264Z,1478892233.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:53.505Z,1478892233.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:53.896Z,1478892233.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:54.060Z,1478892234.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:54.308Z,1478892234.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:54.698Z,1478892234.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:54.856Z,1478892234.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:55.109Z,1478892235.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:55.332Z,1478892235.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:55.513Z,1478892235.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:55.900Z,1478892235.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:56.128Z,1478892236.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:56.308Z,1478892236.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:56.709Z,1478892236.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:56.924Z,1478892236.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:57.109Z,1478892237.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:57.507Z,1478892237.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:57.689Z,1478892237.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:57.909Z,1478892237.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:58.308Z,1478892238.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:58.484Z,1478892238.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:58.719Z,1478892238.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:59.113Z,1478892239.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:59.281Z,1478892239.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:59.509Z,1478892239.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:23:59.692Z,1478892239.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:23:59.897Z,1478892239.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:00.293Z,1478892240.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:00.488Z,1478892240.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:00.693Z,1478892240.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:01.160Z,1478892241.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:01.220Z,1478892241.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:01.497Z,1478892241.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:01.895Z,1478892241.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:02.016Z,1478892242.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:02.327Z,1478892242.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:02.696Z,1478892242.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:02.813Z,1478892242.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:03.138Z,1478892243.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:03.228Z,1478892243.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:03.534Z,1478892243.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:03.907Z,1478892243.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:04.025Z,1478892244.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:04.296Z,1478892244.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:04.705Z,1478892244.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:04.821Z,1478892244.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:05.108Z,1478892245.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:05.240Z,1478892245.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:05.496Z,1478892245.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:05.905Z,1478892245.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:06.036Z,1478892246.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:06.306Z,1478892246.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:06.696Z,1478892246.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:06.833Z,1478892246.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:07.115Z,1478892247.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:07.240Z,1478892247.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:07.516Z,1478892247.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:07.913Z,1478892247.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:08.036Z,1478892248.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:08.287Z,1478892248.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:08.694Z,1478892248.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:08.832Z,1478892248.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:09.121Z,1478892249.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:09.332Z,1478892249.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:09.501Z,1478892249.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:09.923Z,1478892249.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:10.128Z,1478892250.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:10.301Z,1478892250.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:10.695Z,1478892250.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:10.924Z,1478892250.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:11.104Z,1478892251.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:11.496Z,1478892251.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:11.664Z,1478892251.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:11.905Z,1478892251.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:12.306Z,1478892252.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:12.460Z,1478892252.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:12.698Z,1478892252.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:13.105Z,1478892253.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:13.257Z,1478892253.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:13.505Z,1478892253.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:13.668Z,1478892253.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:13.903Z,1478892253.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:14.305Z,1478892254.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:14.464Z,1478892254.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:14.705Z,1478892254.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:15.128Z,1478892255.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:15.196Z,1478892255.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:15.560Z,1478892255.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:15.894Z,1478892255.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:15.992Z,1478892255.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:16.304Z,1478892256.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:16.714Z,1478892256.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:16.790Z,1478892256.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:17.095Z,1478892257.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:17.200Z,1478892257.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:17.530Z,1478892257.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:17.929Z,1478892257.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:17.997Z,1478892257.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:18.301Z,1478892258.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:18.699Z,1478892258.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:18.793Z,1478892258.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:19.097Z,1478892259.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:19.205Z,1478892259.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:19.506Z,1478892259.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:19.898Z,1478892259.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:19.000Z,1478892260.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:20.305Z,1478892260.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:20.706Z,1478892260.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:20.797Z,1478892260.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:21.097Z,1478892261.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:21.208Z,1478892261.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:21.504Z,1478892261.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:21.897Z,1478892261.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:22.005Z,1478892262.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:22.303Z,1478892262.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:22.704Z,1478892262.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:22.800Z,1478892262.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:23.105Z,1478892263.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:23.296Z,1478892263.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:23.498Z,1478892263.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:23.905Z,1478892263.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:24.092Z,1478892264.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:24.306Z,1478892264.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:24.702Z,1478892264.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:24.888Z,1478892264.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:25.109Z,1478892265.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:25.509Z,1478892265.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:25.652Z,1478892265.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:25.904Z,1478892265.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:26.317Z,1478892266.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:26.448Z,1478892266.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:26.713Z,1478892266.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:27.112Z,1478892267.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:27.245Z,1478892267.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:27.515Z,1478892267.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:27.656Z,1478892267.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:27.913Z,1478892267.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:28.314Z,1478892268.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:28.452Z,1478892268.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:28.719Z,1478892268.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:29.095Z,1478892269.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:29.172Z,1478892269.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:29.499Z,1478892269.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:29.901Z,1478892269.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:29.968Z,1478892269.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:30.342Z,1478892270.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:30.705Z,1478892270.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:30.769Z,1478892270.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:31.109Z,1478892271.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:31.188Z,1478892271.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:31.517Z,1478892271.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:31.898Z,1478892271.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:31.984Z,1478892271.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:32.294Z,1478892272.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:32.701Z,1478892272.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:32.780Z,1478892272.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:33.089Z,1478892273.089 [BPC1](ERROR): Failed to receive battery data
2016-11-11T19:24:33.089Z,1478892273.089 [BPC1] Communications Fault, FailCount= 1
2016-11-11T19:24:33.090Z,1478892273.089 [BPC1](ERROR): Communications Fault
2016-11-11T19:24:33.098Z,1478892273.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:33.118Z,1478892273.118 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T19:24:33.192Z,1478892273.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:33.501Z,1478892273.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:33.901Z,1478892273.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:33.988Z,1478892273.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:34.302Z,1478892274.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:34.323Z,1478892274.323 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:24:34.323Z,1478892274.323 [BPC1] No Fault, FailCount= 1
2016-11-11T19:24:34.785Z,1478892274.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:34.803Z,1478892274.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:35.130Z,1478892275.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:35.196Z,1478892275.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:35.505Z,1478892275.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:35.908Z,1478892275.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:35.992Z,1478892275.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:36.308Z,1478892276.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:36.708Z,1478892276.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:36.789Z,1478892276.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:37.109Z,1478892277.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:37.260Z,1478892277.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:37.508Z,1478892277.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:37.909Z,1478892277.909 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:37.909Z,1478892277.909 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 271
2016-11-11T19:24:37.909Z,1478892277.909 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:24:37.920Z,1478892277.920 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:37.920Z,1478892277.921 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 271
2016-11-11T19:24:37.921Z,1478892277.921 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:24:37.923Z,1478892277.923 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:37.923Z,1478892277.923 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 271
2016-11-11T19:24:37.923Z,1478892277.923 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:24:37.966Z,1478892277.966 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:24:37.966Z,1478892277.966 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:24:37.966Z,1478892277.966 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:24:38.056Z,1478892278.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:38.323Z,1478892278.323 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:24:38.323Z,1478892278.323 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 271
2016-11-11T19:24:38.324Z,1478892278.324 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:24:38.324Z,1478892278.324 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 271
2016-11-11T19:24:38.325Z,1478892278.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:24:38.325Z,1478892278.325 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 271
2016-11-11T19:24:38.688Z,1478892278.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:24:38.688Z,1478892278.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:24:38.689Z,1478892278.689 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:24:38.714Z,1478892278.714 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:24:38.714Z,1478892278.714 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:24:38.714Z,1478892278.714 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:24:38.715Z,1478892278.715 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:24:38.715Z,1478892278.715 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:24:38.716Z,1478892278.716 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:24:38.852Z,1478892278.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:39.113Z,1478892279.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:39.502Z,1478892279.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:39.616Z,1478892279.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:39.901Z,1478892279.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:40.326Z,1478892280.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:40.412Z,1478892280.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:40.704Z,1478892280.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:41.122Z,1478892281.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:41.209Z,1478892281.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:41.493Z,1478892281.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:41.624Z,1478892281.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:41.929Z,1478892281.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:42.331Z,1478892282.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:42.420Z,1478892282.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:42.750Z,1478892282.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:43.101Z,1478892283.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:43.148Z,1478892283.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:43.506Z,1478892283.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:43.901Z,1478892283.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:43.945Z,1478892283.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:44.306Z,1478892284.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:44.741Z,1478892284.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:45.152Z,1478892285.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:45.948Z,1478892285.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:46.745Z,1478892286.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:47.160Z,1478892287.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:47.797Z,1478892287.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:47.957Z,1478892287.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:47.973Z,1478892287.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:48.344Z,1478892288.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:48.753Z,1478892288.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:48.817Z,1478892288.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:49.164Z,1478892289.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:49.166Z,1478892289.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:49.541Z,1478892289.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:49.936Z,1478892289.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:49.960Z,1478892289.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:50.340Z,1478892290.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:50.755Z,1478892290.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:50.756Z,1478892290.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:51.137Z,1478892291.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:51.240Z,1478892291.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:51.542Z,1478892291.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:51.945Z,1478892291.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:52.036Z,1478892292.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:52.345Z,1478892292.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:52.744Z,1478892292.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:52.832Z,1478892292.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:53.227Z,1478892293.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:53.554Z,1478892293.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:53.616Z,1478892293.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:53.956Z,1478892293.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:54.353Z,1478892294.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:54.412Z,1478892294.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:54.777Z,1478892294.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:55.139Z,1478892295.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:55.208Z,1478892295.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:55.562Z,1478892295.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:55.620Z,1478892295.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:55.950Z,1478892295.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:56.361Z,1478892296.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:56.416Z,1478892296.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:56.821Z,1478892296.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:57.124Z,1478892297.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:57.156Z,1478892297.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:57.540Z,1478892297.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:57.920Z,1478892297.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:57.951Z,1478892297.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:58.344Z,1478892298.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:58.728Z,1478892298.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:58.781Z,1478892298.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:59.161Z,1478892299.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:59.176Z,1478892299.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:24:59.531Z,1478892299.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:59.949Z,1478892299.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:24:59.972Z,1478892299.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:00.359Z,1478892300.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:00.768Z,1478892300.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:00.781Z,1478892300.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:01.161Z,1478892301.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:01.176Z,1478892301.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:01.526Z,1478892301.526 [PNI_TCM](ERROR): CRC does not match. Expected:0x17095 got:0x44061
2016-11-11T19:25:01.563Z,1478892301.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:01.945Z,1478892301.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:01.972Z,1478892301.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:02.338Z,1478892302.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:02.768Z,1478892302.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:02.782Z,1478892302.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:03.139Z,1478892303.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:03.176Z,1478892303.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:03.548Z,1478892303.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:03.941Z,1478892303.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:03.972Z,1478892303.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:04.349Z,1478892304.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:04.746Z,1478892304.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:04.768Z,1478892304.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:05.165Z,1478892305.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:05.228Z,1478892305.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:05.538Z,1478892305.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:05.969Z,1478892305.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:06.024Z,1478892306.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:06.345Z,1478892306.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:06.753Z,1478892306.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:06.820Z,1478892306.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:07.200Z,1478892307.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:07.562Z,1478892307.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:07.596Z,1478892307.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:07.922Z,1478892307.922 [PNI_TCM](ERROR): CRC does not match. Expected:0x9393 got:0x16873
2016-11-11T19:25:07.953Z,1478892307.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:08.377Z,1478892308.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:08.392Z,1478892308.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:08.738Z,1478892308.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:09.189Z,1478892309.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:09.224Z,1478892309.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:09.545Z,1478892309.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:09.604Z,1478892309.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:09.977Z,1478892309.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:10.374Z,1478892310.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:10.400Z,1478892310.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:10.769Z,1478892310.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:11.124Z,1478892311.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:11.153Z,1478892311.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:11.552Z,1478892311.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:11.920Z,1478892311.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:11.957Z,1478892311.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:12.357Z,1478892312.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:12.716Z,1478892312.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:12.807Z,1478892312.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:13.128Z,1478892313.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:13.154Z,1478892313.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:13.527Z,1478892313.527 [PNI_TCM](ERROR): CRC does not match. Expected:0x50924 got:0x1565
2016-11-11T19:25:13.551Z,1478892313.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:13.924Z,1478892313.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:13.943Z,1478892313.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:14.340Z,1478892314.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:14.721Z,1478892314.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:14.762Z,1478892314.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:15.132Z,1478892315.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:15.173Z,1478892315.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:15.553Z,1478892315.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:15.936Z,1478892315.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:15.951Z,1478892315.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:16.345Z,1478892316.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:16.732Z,1478892316.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:16.767Z,1478892316.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:17.140Z,1478892317.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:17.143Z,1478892317.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:17.537Z,1478892317.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:17.936Z,1478892317.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:17.973Z,1478892317.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:18.346Z,1478892318.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:18.732Z,1478892318.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:18.747Z,1478892318.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:19.144Z,1478892319.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:19.212Z,1478892319.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:19.540Z,1478892319.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:19.949Z,1478892319.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:20.008Z,1478892320.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:20.349Z,1478892320.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:20.748Z,1478892320.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:20.804Z,1478892320.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:21.236Z,1478892321.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:21.552Z,1478892321.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:21.572Z,1478892321.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:21.946Z,1478892321.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:22.368Z,1478892322.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:22.373Z,1478892322.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:22.731Z,1478892322.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:23.164Z,1478892323.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:23.201Z,1478892323.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:23.538Z,1478892323.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:23.588Z,1478892323.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:23.965Z,1478892323.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:24.366Z,1478892324.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:24.384Z,1478892324.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:24.752Z,1478892324.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:25.076Z,1478892325.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:25.133Z,1478892325.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:25.536Z,1478892325.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:25.872Z,1478892325.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:25.945Z,1478892325.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:26.341Z,1478892326.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:26.669Z,1478892326.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:26.759Z,1478892326.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:27.080Z,1478892327.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:27.135Z,1478892327.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:27.534Z,1478892327.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:27.876Z,1478892327.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:27.944Z,1478892327.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:28.342Z,1478892328.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:28.673Z,1478892328.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:28.759Z,1478892328.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:29.096Z,1478892329.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:29.142Z,1478892329.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:29.539Z,1478892329.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:29.892Z,1478892329.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:29.945Z,1478892329.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:30.344Z,1478892330.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:30.697Z,1478892330.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:30.763Z,1478892330.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:31.140Z,1478892331.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:31.152Z,1478892331.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:31.558Z,1478892331.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:31.936Z,1478892331.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:31.960Z,1478892331.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:32.357Z,1478892332.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:32.733Z,1478892332.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:32.781Z,1478892332.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:33.141Z,1478892333.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:33.196Z,1478892333.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:33.535Z,1478892333.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:33.984Z,1478892333.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:33.992Z,1478892333.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:34.340Z,1478892334.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:34.741Z,1478892334.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:34.788Z,1478892334.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:35.229Z,1478892335.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:35.544Z,1478892335.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:35.557Z,1478892335.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:35.953Z,1478892335.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:36.340Z,1478892336.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:36.382Z,1478892336.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:36.733Z,1478892336.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:37.137Z,1478892337.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:37.233Z,1478892337.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:37.538Z,1478892337.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:37.548Z,1478892337.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:37.970Z,1478892337.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:38.344Z,1478892338.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:38.372Z,1478892338.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:38.746Z,1478892338.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:39.056Z,1478892339.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:39.140Z,1478892339.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:39.538Z,1478892339.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:39.852Z,1478892339.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:39.962Z,1478892339.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:40.337Z,1478892340.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:40.649Z,1478892340.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:40.748Z,1478892340.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:41.061Z,1478892341.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:41.138Z,1478892341.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:41.546Z,1478892341.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:41.856Z,1478892341.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:41.938Z,1478892341.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:42.349Z,1478892342.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:42.661Z,1478892342.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:42.751Z,1478892342.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:43.080Z,1478892343.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:43.144Z,1478892343.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:43.547Z,1478892343.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:43.877Z,1478892343.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:43.950Z,1478892343.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:44.341Z,1478892344.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:44.673Z,1478892344.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:45.112Z,1478892345.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:45.908Z,1478892345.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:46.704Z,1478892346.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:47.188Z,1478892347.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:47.984Z,1478892347.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:48.021Z,1478892348.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:48.147Z,1478892348.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:48.526Z,1478892348.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:48.780Z,1478892348.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:48.969Z,1478892348.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:49.337Z,1478892349.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:49.508Z,1478892349.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:49.733Z,1478892349.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:50.133Z,1478892350.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:50.306Z,1478892350.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:50.527Z,1478892350.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:50.953Z,1478892350.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:51.106Z,1478892351.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:51.341Z,1478892351.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:51.532Z,1478892351.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:51.770Z,1478892351.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:52.130Z,1478892352.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:52.328Z,1478892352.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:52.558Z,1478892352.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:52.976Z,1478892352.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:53.048Z,1478892353.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:53.330Z,1478892353.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:53.724Z,1478892353.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:53.844Z,1478892353.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:54.124Z,1478892354.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:54.539Z,1478892354.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:54.640Z,1478892354.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:54.925Z,1478892354.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:55.052Z,1478892355.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:55.324Z,1478892355.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:55.729Z,1478892355.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:55.848Z,1478892355.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:56.123Z,1478892356.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:56.527Z,1478892356.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:56.645Z,1478892356.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:56.936Z,1478892356.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:57.060Z,1478892357.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:57.340Z,1478892357.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:57.736Z,1478892357.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:57.856Z,1478892357.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:58.146Z,1478892358.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:58.548Z,1478892358.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:58.653Z,1478892358.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:58.932Z,1478892358.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:59.060Z,1478892359.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:25:59.327Z,1478892359.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:59.733Z,1478892359.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:25:59.856Z,1478892359.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:00.126Z,1478892360.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:00.530Z,1478892360.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:00.654Z,1478892360.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:00.933Z,1478892360.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:01.128Z,1478892361.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:01.338Z,1478892361.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:01.728Z,1478892361.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:01.924Z,1478892361.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:02.131Z,1478892362.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:02.528Z,1478892362.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:02.720Z,1478892362.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:02.933Z,1478892362.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:03.336Z,1478892363.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:03.488Z,1478892363.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:03.781Z,1478892363.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:04.134Z,1478892364.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:04.284Z,1478892364.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:04.529Z,1478892364.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:04.961Z,1478892364.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:05.081Z,1478892365.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:05.336Z,1478892365.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:05.496Z,1478892365.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:05.736Z,1478892365.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:06.153Z,1478892366.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:06.292Z,1478892366.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:06.540Z,1478892366.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:06.955Z,1478892366.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:07.040Z,1478892367.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:07.365Z,1478892367.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:07.734Z,1478892367.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:07.836Z,1478892367.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:08.133Z,1478892368.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:08.530Z,1478892368.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:08.632Z,1478892368.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:08.941Z,1478892368.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:09.044Z,1478892369.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:09.340Z,1478892369.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:09.736Z,1478892369.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:09.840Z,1478892369.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:10.120Z,1478892370.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:10.525Z,1478892370.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:10.637Z,1478892370.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:10.927Z,1478892370.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:11.048Z,1478892371.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:11.331Z,1478892371.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:11.733Z,1478892371.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:11.844Z,1478892371.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:12.127Z,1478892372.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:12.148Z,1478892372.148 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T19:26:12.541Z,1478892372.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:12.652Z,1478892372.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:12.929Z,1478892372.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:13.060Z,1478892373.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:13.337Z,1478892373.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:13.740Z,1478892373.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:13.856Z,1478892373.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:14.140Z,1478892374.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:14.545Z,1478892374.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:14.652Z,1478892374.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:14.944Z,1478892374.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:15.116Z,1478892375.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:15.341Z,1478892375.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:15.726Z,1478892375.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:15.912Z,1478892375.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:16.129Z,1478892376.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:16.533Z,1478892376.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:16.708Z,1478892376.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:16.932Z,1478892376.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:17.328Z,1478892377.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:17.468Z,1478892377.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:17.741Z,1478892377.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:18.153Z,1478892378.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:18.264Z,1478892378.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:18.529Z,1478892378.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:18.937Z,1478892378.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:19.061Z,1478892379.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:19.357Z,1478892379.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:19.476Z,1478892379.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:19.734Z,1478892379.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:20.125Z,1478892380.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:20.272Z,1478892380.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:20.618Z,1478892380.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:20.925Z,1478892380.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:20.996Z,1478892380.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:21.361Z,1478892381.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:21.761Z,1478892381.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:21.792Z,1478892381.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:22.133Z,1478892382.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:22.533Z,1478892382.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:22.589Z,1478892382.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:22.936Z,1478892382.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:23.000Z,1478892383.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:23.337Z,1478892383.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:23.741Z,1478892383.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:23.796Z,1478892383.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:24.133Z,1478892384.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:24.539Z,1478892384.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:24.592Z,1478892384.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:24.928Z,1478892384.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:25.032Z,1478892385.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:25.332Z,1478892385.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:25.733Z,1478892385.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:25.828Z,1478892385.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:26.126Z,1478892386.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:26.527Z,1478892386.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:26.624Z,1478892386.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:26.933Z,1478892386.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:27.032Z,1478892387.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:27.333Z,1478892387.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:27.728Z,1478892387.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:27.828Z,1478892387.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:28.137Z,1478892388.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:28.538Z,1478892388.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:28.624Z,1478892388.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:28.936Z,1478892388.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:29.096Z,1478892389.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:29.337Z,1478892389.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:29.737Z,1478892389.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:29.892Z,1478892389.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:30.137Z,1478892390.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:30.539Z,1478892390.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:30.688Z,1478892390.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:30.946Z,1478892390.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:31.332Z,1478892391.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:31.448Z,1478892391.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:31.731Z,1478892391.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:32.170Z,1478892392.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:32.244Z,1478892392.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:32.528Z,1478892392.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:32.934Z,1478892392.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:33.046Z,1478892393.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:33.329Z,1478892393.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:33.472Z,1478892393.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:33.773Z,1478892393.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:34.137Z,1478892394.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:34.268Z,1478892394.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:34.606Z,1478892394.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:34.940Z,1478892394.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:34.984Z,1478892394.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:35.354Z,1478892395.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:35.747Z,1478892395.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:35.780Z,1478892395.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:36.157Z,1478892396.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:36.546Z,1478892396.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:36.577Z,1478892396.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:36.925Z,1478892396.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:36.988Z,1478892396.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:37.326Z,1478892397.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:37.729Z,1478892397.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:37.784Z,1478892397.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:38.133Z,1478892398.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:38.572Z,1478892398.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:38.581Z,1478892398.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:38.930Z,1478892398.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:38.992Z,1478892398.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:39.341Z,1478892399.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:39.729Z,1478892399.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:39.788Z,1478892399.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:40.125Z,1478892400.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:40.578Z,1478892400.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:40.584Z,1478892400.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:40.927Z,1478892400.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:40.996Z,1478892400.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:41.333Z,1478892401.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:41.730Z,1478892401.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:41.792Z,1478892401.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:42.128Z,1478892402.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:42.547Z,1478892402.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:42.588Z,1478892402.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:42.946Z,1478892402.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:43.064Z,1478892403.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:43.326Z,1478892403.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:43.348Z,1478892403.348 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T19:26:43.348Z,1478892403.348 [Default:CheckIn:C.Wait] Stopped
2016-11-11T19:26:43.348Z,1478892403.348 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T19:26:43.348Z,1478892403.348 [Default:CheckIn:D] Running Loop=1
2016-11-11T19:26:43.731Z,1478892403.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:43.767Z,1478892403.767 [Default:CheckIn:D] Stopped
2016-11-11T19:26:43.767Z,1478892403.767 [Default:CheckIn:E] Running Loop=1
2016-11-11T19:26:43.860Z,1478892403.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:44.128Z,1478892404.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:44.137Z,1478892404.137 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 876.707617 min 
2016-11-11T19:26:44.138Z,1478892404.138 [Default:CheckIn:E] Stopped
2016-11-11T19:26:44.138Z,1478892404.138 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T19:26:44.138Z,1478892404.138 [Default:CheckIn] Stopped
2016-11-11T19:26:44.138Z,1478892404.138 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T19:26:44.138Z,1478892404.138 [Default:CheckIn](INFO): Running loop #85
2016-11-11T19:26:44.138Z,1478892404.138 [Default:CheckIn] Running Loop=85
2016-11-11T19:26:44.139Z,1478892404.138 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T19:26:44.139Z,1478892404.139 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T19:26:44.533Z,1478892404.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:44.656Z,1478892404.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:45.436Z,1478892405.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:46.232Z,1478892406.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:47.029Z,1478892407.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:47.440Z,1478892407.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:47.929Z,1478892407.929 [NAL9602](INFO): Powering up
2016-11-11T19:26:48.027Z,1478892408.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:48.153Z,1478892408.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:48.236Z,1478892408.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:48.596Z,1478892408.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:48.980Z,1478892408.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:48.984Z,1478892408.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:49.336Z,1478892409.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:49.784Z,1478892409.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:49.798Z,1478892409.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:50.154Z,1478892410.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:50.581Z,1478892410.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:50.646Z,1478892410.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:50.975Z,1478892410.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:50.988Z,1478892410.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:51.375Z,1478892411.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:51.748Z,1478892411.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:51.784Z,1478892411.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:52.185Z,1478892412.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:52.580Z,1478892412.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:52.668Z,1478892412.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:52.978Z,1478892412.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:52.988Z,1478892412.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:53.349Z,1478892413.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:53.749Z,1478892413.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:53.784Z,1478892413.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:54.154Z,1478892414.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:54.580Z,1478892414.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:54.616Z,1478892414.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:54.962Z,1478892414.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:55.008Z,1478892415.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:55.374Z,1478892415.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:55.775Z,1478892415.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:55.812Z,1478892415.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:56.150Z,1478892416.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:56.554Z,1478892416.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:56.609Z,1478892416.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:56.972Z,1478892416.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:57.048Z,1478892417.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:57.342Z,1478892417.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:57.765Z,1478892417.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:57.844Z,1478892417.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:58.141Z,1478892418.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:58.580Z,1478892418.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:58.640Z,1478892418.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:58.897Z,1478892418.897 [NAL9602](INFO): NAL9602 initialized
2016-11-11T19:26:58.943Z,1478892418.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:59.353Z,1478892419.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:59.436Z,1478892419.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:59.701Z,1478892419.701 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T19:26:59.701Z,1478892419.701 [NAL9602] Data Fault, FailCount= 2
2016-11-11T19:26:59.701Z,1478892419.701 [NAL9602](ERROR): Data Fault
2016-11-11T19:26:59.802Z,1478892419.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:26:59.844Z,1478892419.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:26:59.910Z,1478892419.910 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T19:27:00.097Z,1478892420.097 [NAL9602](INFO): Powering down
2016-11-11T19:27:00.145Z,1478892420.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:00.574Z,1478892420.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:00.640Z,1478892420.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:00.945Z,1478892420.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:01.039Z,1478892421.039 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T19:27:01.040Z,1478892421.039 [NAL9602] No Fault, FailCount= 2
2016-11-11T19:27:01.366Z,1478892421.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:01.408Z,1478892421.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:01.729Z,1478892421.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:02.137Z,1478892422.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:02.204Z,1478892422.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:02.657Z,1478892422.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:02.940Z,1478892422.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:02.965Z,1478892422.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:03.373Z,1478892423.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:03.733Z,1478892423.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:03.736Z,1478892423.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:04.161Z,1478892424.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:04.533Z,1478892424.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:04.609Z,1478892424.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:04.944Z,1478892424.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:04.973Z,1478892424.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:05.301Z,1478892425.301 [NAL9602](INFO): Powering up NAL9602
2016-11-11T19:27:05.332Z,1478892425.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:05.736Z,1478892425.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:05.740Z,1478892425.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:06.135Z,1478892426.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:06.536Z,1478892426.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:06.545Z,1478892426.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:06.933Z,1478892426.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:07.332Z,1478892427.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:07.337Z,1478892427.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:07.731Z,1478892427.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:08.124Z,1478892428.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:08.128Z,1478892428.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:08.542Z,1478892428.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:08.924Z,1478892428.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:08.950Z,1478892428.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:09.358Z,1478892429.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:09.720Z,1478892429.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:09.751Z,1478892429.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:10.135Z,1478892430.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:10.517Z,1478892430.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:10.537Z,1478892430.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:10.935Z,1478892430.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:11.313Z,1478892431.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:11.347Z,1478892431.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:11.741Z,1478892431.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:12.109Z,1478892432.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:12.132Z,1478892432.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:12.537Z,1478892432.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:12.904Z,1478892432.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:12.950Z,1478892432.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:13.332Z,1478892433.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:13.700Z,1478892433.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:13.738Z,1478892433.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:14.141Z,1478892434.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:14.496Z,1478892434.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:14.545Z,1478892434.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:14.938Z,1478892434.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:15.292Z,1478892435.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:15.366Z,1478892435.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:15.734Z,1478892435.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:16.092Z,1478892436.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:16.224Z,1478892436.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:16.502Z,1478892436.502 [NAL9602](INFO): NAL9602 initialized
2016-11-11T19:27:16.531Z,1478892436.532 [PNI_TCM](ERROR): CRC does not match. Expected:0x11037 got:0x1031
2016-11-11T19:27:16.577Z,1478892436.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:16.899Z,1478892436.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:16.932Z,1478892436.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:17.349Z,1478892437.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:17.696Z,1478892437.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:17.746Z,1478892437.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:18.173Z,1478892438.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:18.492Z,1478892438.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:18.542Z,1478892438.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:18.969Z,1478892438.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:19.292Z,1478892439.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:19.377Z,1478892439.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:19.775Z,1478892439.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:20.092Z,1478892440.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:20.147Z,1478892440.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:20.538Z,1478892440.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:20.896Z,1478892440.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:20.949Z,1478892440.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:21.326Z,1478892441.326 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T19:27:21.353Z,1478892441.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:21.692Z,1478892441.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:21.730Z,1478892441.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:22.132Z,1478892442.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:22.495Z,1478892442.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:22.542Z,1478892442.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:22.934Z,1478892442.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:23.292Z,1478892443.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:23.341Z,1478892443.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:23.733Z,1478892443.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:24.092Z,1478892444.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:24.153Z,1478892444.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:24.547Z,1478892444.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:24.900Z,1478892444.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:24.952Z,1478892444.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:25.343Z,1478892445.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:25.696Z,1478892445.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:25.737Z,1478892445.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:26.135Z,1478892446.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:26.493Z,1478892446.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:26.537Z,1478892446.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:26.936Z,1478892446.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:27.296Z,1478892447.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:27.333Z,1478892447.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:27.738Z,1478892447.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:28.096Z,1478892448.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:28.145Z,1478892448.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:28.535Z,1478892448.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:28.892Z,1478892448.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:28.967Z,1478892448.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:29.377Z,1478892449.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:29.698Z,1478892449.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:29.766Z,1478892449.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:30.108Z,1478892450.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:30.169Z,1478892450.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:30.516Z,1478892450.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:30.599Z,1478892450.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:30.924Z,1478892450.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:30.968Z,1478892450.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:31.332Z,1478892451.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:31.398Z,1478892451.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:31.740Z,1478892451.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:31.761Z,1478892451.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:32.146Z,1478892452.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:32.148Z,1478892452.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:32.556Z,1478892452.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:32.605Z,1478892452.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:32.954Z,1478892452.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:32.964Z,1478892452.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:33.366Z,1478892453.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:33.372Z,1478892453.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:33.779Z,1478892453.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:33.780Z,1478892453.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:34.177Z,1478892454.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:34.188Z,1478892454.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:34.553Z,1478892454.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:34.597Z,1478892454.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:34.954Z,1478892454.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:35.016Z,1478892455.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:35.367Z,1478892455.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:35.424Z,1478892455.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:35.774Z,1478892455.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:35.832Z,1478892455.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:36.145Z,1478892456.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:36.558Z,1478892456.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:36.628Z,1478892456.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:36.954Z,1478892456.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:37.036Z,1478892457.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:37.350Z,1478892457.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:37.746Z,1478892457.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:37.832Z,1478892457.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:38.156Z,1478892458.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:38.601Z,1478892458.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:38.628Z,1478892458.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:38.950Z,1478892458.950 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:38.950Z,1478892458.950 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 272
2016-11-11T19:27:38.950Z,1478892458.950 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:27:38.966Z,1478892458.966 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:38.966Z,1478892458.966 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 272
2016-11-11T19:27:38.966Z,1478892458.966 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:27:38.968Z,1478892458.968 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:38.969Z,1478892458.968 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 272
2016-11-11T19:27:38.969Z,1478892458.968 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:27:39.016Z,1478892459.016 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:27:39.016Z,1478892459.016 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:27:39.017Z,1478892459.017 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:27:39.036Z,1478892459.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:39.366Z,1478892459.366 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:27:39.366Z,1478892459.366 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 272
2016-11-11T19:27:39.367Z,1478892459.367 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:27:39.367Z,1478892459.367 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 272
2016-11-11T19:27:39.371Z,1478892459.372 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:27:39.372Z,1478892459.372 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 272
2016-11-11T19:27:39.737Z,1478892459.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:27:39.738Z,1478892459.738 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:27:39.738Z,1478892459.738 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:27:39.743Z,1478892459.743 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:27:39.743Z,1478892459.743 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:27:39.744Z,1478892459.744 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:27:39.744Z,1478892459.744 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:27:39.745Z,1478892459.745 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:27:39.745Z,1478892459.745 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:27:39.832Z,1478892459.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:40.166Z,1478892460.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:40.577Z,1478892460.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:40.628Z,1478892460.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:41.026Z,1478892461.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:41.344Z,1478892461.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:41.370Z,1478892461.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:41.753Z,1478892461.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:42.138Z,1478892462.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:42.140Z,1478892462.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:42.551Z,1478892462.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:42.936Z,1478892462.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:43.022Z,1478892463.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:43.338Z,1478892463.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:43.348Z,1478892463.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:43.728Z,1478892463.728 [BPC1](ERROR): Failed to parse message.
2016-11-11T19:27:43.728Z,1478892463.728 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T19:27:43.728Z,1478892463.728 [BPC1] Data Fault, FailCount= 1
2016-11-11T19:27:43.728Z,1478892463.728 [BPC1](ERROR): Data Fault
2016-11-11T19:27:43.753Z,1478892463.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:43.811Z,1478892463.811 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T19:27:44.139Z,1478892464.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:44.144Z,1478892464.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:44.562Z,1478892464.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:44.880Z,1478892464.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:45.676Z,1478892465.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:46.472Z,1478892466.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:46.892Z,1478892466.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:47.688Z,1478892467.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:48.484Z,1478892468.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:48.892Z,1478892468.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:49.688Z,1478892469.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:50.484Z,1478892470.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:50.892Z,1478892470.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:51.688Z,1478892471.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:52.290Z,1478892472.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:52.362Z,1478892472.362 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:27:52.362Z,1478892472.362 [BPC1] No Fault, FailCount= 1
2016-11-11T19:27:52.484Z,1478892472.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:52.634Z,1478892472.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:52.882Z,1478892472.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:52.956Z,1478892472.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:53.242Z,1478892473.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:53.641Z,1478892473.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:53.752Z,1478892473.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:54.051Z,1478892474.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:54.432Z,1478892474.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:54.548Z,1478892474.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:54.846Z,1478892474.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:55.251Z,1478892475.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:55.312Z,1478892475.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:55.654Z,1478892475.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:56.041Z,1478892476.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:56.108Z,1478892476.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:56.442Z,1478892476.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:56.839Z,1478892476.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:56.904Z,1478892476.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:57.260Z,1478892477.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:57.316Z,1478892477.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:57.653Z,1478892477.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:58.105Z,1478892478.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:58.112Z,1478892478.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:58.521Z,1478892478.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:58.849Z,1478892478.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:58.880Z,1478892478.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:27:59.236Z,1478892479.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:59.637Z,1478892479.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:27:59.676Z,1478892479.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:00.036Z,1478892480.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:00.472Z,1478892480.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:00.490Z,1478892480.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:00.848Z,1478892480.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:00.884Z,1478892480.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:01.237Z,1478892481.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:01.633Z,1478892481.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:01.680Z,1478892481.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:02.043Z,1478892482.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:02.476Z,1478892482.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:02.514Z,1478892482.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:02.843Z,1478892482.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:02.884Z,1478892482.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:03.245Z,1478892483.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:03.646Z,1478892483.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:03.680Z,1478892483.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:04.079Z,1478892484.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:04.476Z,1478892484.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:04.562Z,1478892484.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:04.884Z,1478892484.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:04.894Z,1478892484.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:05.253Z,1478892485.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:05.668Z,1478892485.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:05.680Z,1478892485.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:06.066Z,1478892486.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:06.424Z,1478892486.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:06.476Z,1478892486.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:06.878Z,1478892486.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:06.932Z,1478892486.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:07.273Z,1478892487.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:07.633Z,1478892487.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:07.728Z,1478892487.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:08.039Z,1478892488.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:08.433Z,1478892488.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:08.524Z,1478892488.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:08.832Z,1478892488.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:09.246Z,1478892489.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:09.292Z,1478892489.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:09.638Z,1478892489.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:10.052Z,1478892490.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:10.088Z,1478892490.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:10.445Z,1478892490.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:10.884Z,1478892490.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:10.909Z,1478892490.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:11.228Z,1478892491.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:11.296Z,1478892491.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:11.631Z,1478892491.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:12.037Z,1478892492.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:12.092Z,1478892492.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:12.502Z,1478892492.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:12.832Z,1478892492.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:12.842Z,1478892492.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:13.234Z,1478892493.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:13.628Z,1478892493.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:13.663Z,1478892493.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:14.042Z,1478892494.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:14.425Z,1478892494.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:14.505Z,1478892494.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:14.838Z,1478892494.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:14.884Z,1478892494.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:15.247Z,1478892495.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:15.647Z,1478892495.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:15.680Z,1478892495.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:16.044Z,1478892496.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:16.476Z,1478892496.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:16.492Z,1478892496.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:16.853Z,1478892496.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:16.892Z,1478892496.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:17.232Z,1478892497.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:17.635Z,1478892497.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:17.688Z,1478892497.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:18.082Z,1478892498.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:18.484Z,1478892498.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:18.517Z,1478892498.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:18.847Z,1478892498.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:18.892Z,1478892498.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:19.248Z,1478892499.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:19.674Z,1478892499.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:19.688Z,1478892499.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:20.049Z,1478892500.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:20.491Z,1478892500.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:20.524Z,1478892500.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:20.857Z,1478892500.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:20.916Z,1478892500.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:21.267Z,1478892501.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:21.665Z,1478892501.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:21.712Z,1478892501.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:22.034Z,1478892502.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:22.454Z,1478892502.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:22.508Z,1478892502.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:22.910Z,1478892502.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:23.261Z,1478892503.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:23.296Z,1478892503.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:23.657Z,1478892503.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:24.045Z,1478892504.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:24.092Z,1478892504.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:24.441Z,1478892504.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:24.888Z,1478892504.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:24.898Z,1478892504.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:25.225Z,1478892505.225 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T19:28:25.263Z,1478892505.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:25.300Z,1478892505.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:25.665Z,1478892505.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:26.033Z,1478892506.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:26.096Z,1478892506.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:26.489Z,1478892506.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:26.816Z,1478892506.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:26.862Z,1478892506.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:27.246Z,1478892507.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:27.612Z,1478892507.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:27.640Z,1478892507.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:28.042Z,1478892508.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:28.411Z,1478892508.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:28.470Z,1478892508.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:28.824Z,1478892508.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:28.844Z,1478892508.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:29.228Z,1478892509.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:29.620Z,1478892509.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:29.662Z,1478892509.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:30.034Z,1478892510.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:30.417Z,1478892510.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:30.483Z,1478892510.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:30.824Z,1478892510.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:30.837Z,1478892510.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:31.273Z,1478892511.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:31.620Z,1478892511.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:31.653Z,1478892511.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:32.053Z,1478892512.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:32.417Z,1478892512.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:32.517Z,1478892512.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:32.828Z,1478892512.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:32.853Z,1478892512.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:33.222Z,1478892513.222 [PNI_TCM](ERROR): CRC does not match. Expected:0x16189 got:0x37127
2016-11-11T19:28:33.259Z,1478892513.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:33.624Z,1478892513.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:33.630Z,1478892513.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:34.085Z,1478892514.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:34.420Z,1478892514.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:34.436Z,1478892514.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:34.893Z,1478892514.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:34.920Z,1478892514.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:35.248Z,1478892515.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:35.675Z,1478892515.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:35.716Z,1478892515.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:36.105Z,1478892516.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:36.501Z,1478892516.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:36.512Z,1478892516.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:36.903Z,1478892516.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:37.237Z,1478892517.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:37.296Z,1478892517.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:37.646Z,1478892517.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:38.044Z,1478892518.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:38.092Z,1478892518.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:38.434Z,1478892518.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:38.888Z,1478892518.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:38.898Z,1478892518.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:39.229Z,1478892519.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:39.296Z,1478892519.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:39.652Z,1478892519.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:40.057Z,1478892520.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:40.092Z,1478892520.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:40.461Z,1478892520.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:40.776Z,1478892520.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:40.841Z,1478892520.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:41.235Z,1478892521.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:41.572Z,1478892521.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:41.640Z,1478892521.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:42.042Z,1478892522.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:42.369Z,1478892522.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:42.446Z,1478892522.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:42.780Z,1478892522.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:42.848Z,1478892522.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:43.244Z,1478892523.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:43.576Z,1478892523.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:43.637Z,1478892523.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:44.026Z,1478892524.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:44.381Z,1478892524.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:44.497Z,1478892524.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:44.815Z,1478892524.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:44.833Z,1478892524.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:45.608Z,1478892525.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:46.404Z,1478892526.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:46.812Z,1478892526.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:47.608Z,1478892527.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:48.404Z,1478892528.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:48.500Z,1478892528.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:48.641Z,1478892528.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:48.888Z,1478892528.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:49.041Z,1478892529.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:49.419Z,1478892529.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:49.684Z,1478892529.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:49.849Z,1478892529.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:50.248Z,1478892530.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:50.480Z,1478892530.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:50.621Z,1478892530.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:51.025Z,1478892531.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:51.224Z,1478892531.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:51.421Z,1478892531.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:51.816Z,1478892531.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:52.020Z,1478892532.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:52.220Z,1478892532.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:52.629Z,1478892532.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:52.817Z,1478892532.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:53.019Z,1478892533.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:53.228Z,1478892533.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:53.419Z,1478892533.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:53.823Z,1478892533.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:54.024Z,1478892534.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:54.226Z,1478892534.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:54.629Z,1478892534.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:54.752Z,1478892534.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:55.030Z,1478892535.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:55.424Z,1478892535.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:55.550Z,1478892535.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:55.825Z,1478892535.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:56.225Z,1478892536.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:56.345Z,1478892536.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:56.624Z,1478892536.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:56.756Z,1478892536.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:57.034Z,1478892537.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:57.445Z,1478892537.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:57.552Z,1478892537.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:57.829Z,1478892537.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:58.235Z,1478892538.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:58.354Z,1478892538.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:58.633Z,1478892538.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:58.788Z,1478892538.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:59.030Z,1478892539.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:59.414Z,1478892539.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:28:59.584Z,1478892539.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:28:59.822Z,1478892539.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:00.221Z,1478892540.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:00.380Z,1478892540.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:00.661Z,1478892540.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:00.792Z,1478892540.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:01.021Z,1478892541.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:01.434Z,1478892541.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:01.588Z,1478892541.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:01.833Z,1478892541.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:02.238Z,1478892542.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:02.384Z,1478892542.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:02.625Z,1478892542.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:02.880Z,1478892542.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:03.026Z,1478892543.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:03.445Z,1478892543.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:03.676Z,1478892543.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:03.833Z,1478892543.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:04.241Z,1478892544.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:04.472Z,1478892544.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:04.645Z,1478892544.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:05.008Z,1478892545.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:05.204Z,1478892545.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:05.413Z,1478892545.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:05.838Z,1478892545.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:06.000Z,1478892546.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:06.225Z,1478892546.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:06.620Z,1478892546.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:06.797Z,1478892546.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:07.021Z,1478892547.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:07.208Z,1478892547.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:07.421Z,1478892547.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:07.820Z,1478892547.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:08.004Z,1478892548.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:08.221Z,1478892548.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:08.621Z,1478892548.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:08.737Z,1478892548.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:09.016Z,1478892549.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:09.428Z,1478892549.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:09.532Z,1478892549.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:09.844Z,1478892549.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:10.229Z,1478892550.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:10.330Z,1478892550.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:10.629Z,1478892550.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:10.748Z,1478892550.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:11.025Z,1478892551.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:11.427Z,1478892551.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:11.544Z,1478892551.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:11.821Z,1478892551.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:12.233Z,1478892552.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:12.341Z,1478892552.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:12.637Z,1478892552.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:12.752Z,1478892552.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:13.039Z,1478892553.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:13.425Z,1478892553.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:13.548Z,1478892553.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:13.817Z,1478892553.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:14.221Z,1478892554.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:14.345Z,1478892554.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:14.626Z,1478892554.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:14.756Z,1478892554.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:15.028Z,1478892555.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:15.449Z,1478892555.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:15.552Z,1478892555.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:15.813Z,1478892555.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:16.212Z,1478892556.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:16.348Z,1478892556.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:16.653Z,1478892556.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:16.840Z,1478892556.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:17.018Z,1478892557.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:17.415Z,1478892557.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:17.636Z,1478892557.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:17.854Z,1478892557.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:18.218Z,1478892558.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:18.432Z,1478892558.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:18.661Z,1478892558.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:19.054Z,1478892559.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:19.178Z,1478892559.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:19.421Z,1478892559.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:19.829Z,1478892559.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:19.972Z,1478892559.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:20.221Z,1478892560.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:20.615Z,1478892560.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:20.784Z,1478892560.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:21.029Z,1478892561.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:21.208Z,1478892561.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:21.417Z,1478892561.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:21.820Z,1478892561.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:22.004Z,1478892562.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:22.221Z,1478892562.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:22.611Z,1478892562.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:22.716Z,1478892562.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:23.027Z,1478892563.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:23.431Z,1478892563.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:23.512Z,1478892563.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:23.821Z,1478892563.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:24.221Z,1478892564.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:24.309Z,1478892564.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:24.629Z,1478892564.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:24.720Z,1478892564.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:25.025Z,1478892565.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:25.418Z,1478892565.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:25.516Z,1478892565.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:25.822Z,1478892565.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:26.233Z,1478892566.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:26.313Z,1478892566.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:26.626Z,1478892566.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:26.724Z,1478892566.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:27.025Z,1478892567.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:27.442Z,1478892567.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:27.520Z,1478892567.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:27.834Z,1478892567.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:28.241Z,1478892568.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:28.317Z,1478892568.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:28.621Z,1478892568.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:28.728Z,1478892568.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:29.025Z,1478892569.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:29.465Z,1478892569.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:29.524Z,1478892569.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:29.821Z,1478892569.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:30.221Z,1478892570.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:30.320Z,1478892570.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:30.624Z,1478892570.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:30.808Z,1478892570.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:31.053Z,1478892571.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:31.429Z,1478892571.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:31.604Z,1478892571.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:31.813Z,1478892571.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:32.261Z,1478892572.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:32.400Z,1478892572.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:32.623Z,1478892572.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:33.077Z,1478892573.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:33.152Z,1478892573.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:33.447Z,1478892573.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:33.853Z,1478892573.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:33.948Z,1478892573.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:34.218Z,1478892574.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:34.617Z,1478892574.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:34.745Z,1478892574.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:35.027Z,1478892575.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:35.156Z,1478892575.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:35.413Z,1478892575.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:35.833Z,1478892575.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:35.952Z,1478892575.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:36.225Z,1478892576.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:36.621Z,1478892576.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:36.712Z,1478892576.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:37.016Z,1478892577.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:37.424Z,1478892577.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:37.508Z,1478892577.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:37.822Z,1478892577.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:38.231Z,1478892578.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:38.304Z,1478892578.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:38.638Z,1478892578.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:38.716Z,1478892578.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:39.028Z,1478892579.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:39.465Z,1478892579.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:39.512Z,1478892579.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:39.828Z,1478892579.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:40.225Z,1478892580.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:40.308Z,1478892580.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:40.637Z,1478892580.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:40.716Z,1478892580.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:41.032Z,1478892581.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:41.441Z,1478892581.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:41.512Z,1478892581.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:41.816Z,1478892581.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:42.221Z,1478892582.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:42.308Z,1478892582.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:42.627Z,1478892582.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:42.716Z,1478892582.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:43.031Z,1478892583.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:43.431Z,1478892583.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:43.512Z,1478892583.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:43.829Z,1478892583.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:44.233Z,1478892584.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:44.308Z,1478892584.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:44.629Z,1478892584.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:44.784Z,1478892584.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:45.013Z,1478892585.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:45.580Z,1478892585.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:46.377Z,1478892586.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:47.144Z,1478892587.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:47.940Z,1478892587.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:48.435Z,1478892588.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:48.577Z,1478892588.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:48.737Z,1478892588.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:48.953Z,1478892588.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:49.164Z,1478892589.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:49.369Z,1478892589.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:49.723Z,1478892589.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:49.960Z,1478892589.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:50.151Z,1478892590.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:50.546Z,1478892590.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:50.672Z,1478892590.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:50.928Z,1478892590.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:51.329Z,1478892591.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:51.468Z,1478892591.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:51.749Z,1478892591.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:52.134Z,1478892592.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:52.267Z,1478892592.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:52.533Z,1478892592.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:52.680Z,1478892592.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:52.933Z,1478892592.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:53.335Z,1478892593.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:53.476Z,1478892593.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:53.734Z,1478892593.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:54.133Z,1478892594.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:54.273Z,1478892594.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:54.533Z,1478892594.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:54.684Z,1478892594.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:54.932Z,1478892594.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:55.333Z,1478892595.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:55.480Z,1478892595.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:55.734Z,1478892595.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:56.128Z,1478892596.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:56.277Z,1478892596.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:56.517Z,1478892596.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:56.688Z,1478892596.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:56.917Z,1478892596.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:57.361Z,1478892597.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:57.484Z,1478892597.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:57.740Z,1478892597.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:58.141Z,1478892598.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:58.280Z,1478892598.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:58.541Z,1478892598.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:58.760Z,1478892598.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:58.921Z,1478892598.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:59.327Z,1478892599.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:29:59.556Z,1478892599.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:29:59.721Z,1478892599.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:00.131Z,1478892600.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:00.352Z,1478892600.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:00.522Z,1478892600.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:00.933Z,1478892600.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:01.112Z,1478892601.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:01.325Z,1478892601.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:01.733Z,1478892601.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:01.908Z,1478892601.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:02.132Z,1478892602.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:02.538Z,1478892602.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:02.705Z,1478892602.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:02.981Z,1478892602.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:03.116Z,1478892603.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:03.336Z,1478892603.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:03.758Z,1478892603.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:03.912Z,1478892603.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:04.137Z,1478892604.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:04.557Z,1478892604.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:04.640Z,1478892604.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:04.949Z,1478892604.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:05.317Z,1478892605.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:05.436Z,1478892605.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:05.717Z,1478892605.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:06.152Z,1478892606.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:06.233Z,1478892606.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:06.532Z,1478892606.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:06.656Z,1478892606.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:06.931Z,1478892606.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:07.335Z,1478892607.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:07.452Z,1478892607.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:07.730Z,1478892607.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:08.133Z,1478892608.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:08.249Z,1478892608.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:08.521Z,1478892608.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:08.660Z,1478892608.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:08.921Z,1478892608.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:09.321Z,1478892609.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:09.456Z,1478892609.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:09.721Z,1478892609.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:10.129Z,1478892610.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:10.253Z,1478892610.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:10.547Z,1478892610.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:10.664Z,1478892610.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:10.926Z,1478892610.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:11.319Z,1478892611.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:11.460Z,1478892611.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:11.723Z,1478892611.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:12.125Z,1478892612.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:12.256Z,1478892612.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:12.545Z,1478892612.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:12.732Z,1478892612.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:12.937Z,1478892612.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:13.329Z,1478892613.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:13.528Z,1478892613.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:13.728Z,1478892613.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:14.132Z,1478892614.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:14.324Z,1478892614.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:14.537Z,1478892614.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:14.934Z,1478892614.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:15.092Z,1478892615.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:15.337Z,1478892615.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:15.732Z,1478892615.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:15.888Z,1478892615.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:16.120Z,1478892616.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:16.521Z,1478892616.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:16.685Z,1478892616.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:16.985Z,1478892616.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:17.104Z,1478892617.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:17.325Z,1478892617.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:17.749Z,1478892617.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:17.900Z,1478892617.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:18.141Z,1478892618.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:18.553Z,1478892618.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:18.624Z,1478892618.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:18.965Z,1478892618.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:19.341Z,1478892619.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:19.420Z,1478892619.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:19.725Z,1478892619.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:20.125Z,1478892620.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:20.217Z,1478892620.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:20.540Z,1478892620.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:20.628Z,1478892620.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:20.934Z,1478892620.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:21.337Z,1478892621.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:21.424Z,1478892621.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:21.716Z,1478892621.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:22.120Z,1478892622.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:22.221Z,1478892622.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:22.529Z,1478892622.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:22.636Z,1478892622.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:22.932Z,1478892622.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:23.343Z,1478892623.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:23.432Z,1478892623.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:23.740Z,1478892623.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:24.129Z,1478892624.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:24.228Z,1478892624.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:24.517Z,1478892624.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:24.640Z,1478892624.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:24.926Z,1478892624.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:25.353Z,1478892625.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:25.436Z,1478892625.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:25.724Z,1478892625.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:26.125Z,1478892626.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:26.233Z,1478892626.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:26.525Z,1478892626.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:26.732Z,1478892626.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:26.925Z,1478892626.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:27.324Z,1478892627.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:27.528Z,1478892627.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:27.724Z,1478892627.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:28.131Z,1478892628.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:28.324Z,1478892628.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:28.531Z,1478892628.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:28.941Z,1478892628.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:29.068Z,1478892629.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:29.345Z,1478892629.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:29.725Z,1478892629.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:29.864Z,1478892629.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:30.129Z,1478892630.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:30.561Z,1478892630.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:30.661Z,1478892630.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:30.989Z,1478892630.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:31.072Z,1478892631.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:31.325Z,1478892631.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:31.743Z,1478892631.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:31.868Z,1478892631.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:32.129Z,1478892632.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:32.546Z,1478892632.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:32.620Z,1478892632.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:32.953Z,1478892632.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:33.335Z,1478892633.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:33.416Z,1478892633.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:33.729Z,1478892633.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:34.128Z,1478892634.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:34.213Z,1478892634.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:34.530Z,1478892634.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:34.624Z,1478892634.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:34.933Z,1478892634.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:35.332Z,1478892635.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:35.420Z,1478892635.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:35.733Z,1478892635.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:36.140Z,1478892636.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:36.216Z,1478892636.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:36.528Z,1478892636.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:36.624Z,1478892636.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:36.920Z,1478892636.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:37.329Z,1478892637.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:37.420Z,1478892637.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:37.724Z,1478892637.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:38.130Z,1478892638.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:38.216Z,1478892638.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:38.529Z,1478892638.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:38.624Z,1478892638.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:38.930Z,1478892638.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:39.334Z,1478892639.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:39.420Z,1478892639.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:39.729Z,1478892639.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:40.129Z,1478892640.129 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:40.129Z,1478892640.129 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 273
2016-11-11T19:30:40.129Z,1478892640.129 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:30:40.136Z,1478892640.136 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:40.136Z,1478892640.136 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 273
2016-11-11T19:30:40.136Z,1478892640.136 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:30:40.138Z,1478892640.138 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:40.138Z,1478892640.138 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 273
2016-11-11T19:30:40.138Z,1478892640.138 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:30:40.169Z,1478892640.168 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:30:40.169Z,1478892640.169 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:30:40.169Z,1478892640.169 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:30:40.216Z,1478892640.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:40.555Z,1478892640.556 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:30:40.556Z,1478892640.556 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 273
2016-11-11T19:30:40.556Z,1478892640.556 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:30:40.556Z,1478892640.556 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 273
2016-11-11T19:30:40.557Z,1478892640.557 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:30:40.557Z,1478892640.557 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 273
2016-11-11T19:30:40.700Z,1478892640.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:40.924Z,1478892640.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:30:40.924Z,1478892640.924 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:30:40.924Z,1478892640.924 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:30:40.938Z,1478892640.938 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:30:40.938Z,1478892640.938 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:30:40.938Z,1478892640.938 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:30:40.939Z,1478892640.939 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:30:40.939Z,1478892640.939 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:30:40.940Z,1478892640.940 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:30:41.324Z,1478892641.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:41.496Z,1478892641.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:41.730Z,1478892641.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:42.143Z,1478892642.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:42.292Z,1478892642.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:42.533Z,1478892642.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:42.937Z,1478892642.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:43.044Z,1478892643.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:43.337Z,1478892643.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:43.737Z,1478892643.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:43.840Z,1478892643.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:44.117Z,1478892644.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:44.521Z,1478892644.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:44.637Z,1478892644.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:44.930Z,1478892644.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:45.048Z,1478892645.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:45.373Z,1478892645.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:45.844Z,1478892645.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:46.588Z,1478892646.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:47.384Z,1478892647.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:48.181Z,1478892648.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:48.592Z,1478892648.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:48.887Z,1478892648.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:49.025Z,1478892649.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:49.385Z,1478892649.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:49.388Z,1478892649.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:49.785Z,1478892649.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:50.185Z,1478892650.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:50.211Z,1478892650.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:50.578Z,1478892650.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:50.608Z,1478892650.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:50.965Z,1478892650.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:51.388Z,1478892651.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:51.404Z,1478892651.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:51.762Z,1478892651.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:52.200Z,1478892652.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:52.224Z,1478892652.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:52.573Z,1478892652.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:52.608Z,1478892652.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:52.975Z,1478892652.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:53.373Z,1478892653.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:53.404Z,1478892653.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:53.771Z,1478892653.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:54.174Z,1478892654.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:54.212Z,1478892654.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:54.557Z,1478892654.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:54.676Z,1478892654.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:54.962Z,1478892654.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:55.362Z,1478892655.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:55.472Z,1478892655.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:55.760Z,1478892655.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:56.165Z,1478892656.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:56.268Z,1478892656.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:56.577Z,1478892656.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:56.961Z,1478892656.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:57.032Z,1478892657.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:57.373Z,1478892657.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:57.765Z,1478892657.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:57.828Z,1478892657.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:58.122Z,1478892658.122 [NAL9602](INFO): SBD MO Status=0, MOMSN=356, MT Status=0, MTMSN=0
2016-11-11T19:30:58.122Z,1478892658.122 [NAL9602](INFO): No messages in MT queue
2016-11-11T19:30:58.182Z,1478892658.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:58.568Z,1478892658.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:58.624Z,1478892658.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:58.989Z,1478892658.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:59.048Z,1478892659.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:30:59.388Z,1478892659.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:59.789Z,1478892659.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:30:59.844Z,1478892659.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:00.229Z,1478892660.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:00.561Z,1478892660.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:00.577Z,1478892660.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:00.978Z,1478892660.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:01.356Z,1478892661.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:01.379Z,1478892661.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:01.782Z,1478892661.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:02.153Z,1478892662.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:02.220Z,1478892662.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:02.576Z,1478892662.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:02.588Z,1478892662.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:02.970Z,1478892662.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:03.373Z,1478892663.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:03.393Z,1478892663.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:03.817Z,1478892663.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:04.170Z,1478892664.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:04.226Z,1478892664.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:04.586Z,1478892664.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:04.604Z,1478892664.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:05.009Z,1478892665.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:05.377Z,1478892665.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:05.400Z,1478892665.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:05.799Z,1478892665.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:06.196Z,1478892666.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:06.242Z,1478892666.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:06.570Z,1478892666.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:06.604Z,1478892666.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:06.962Z,1478892666.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:07.389Z,1478892667.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:07.400Z,1478892667.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:07.793Z,1478892667.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:08.180Z,1478892668.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:08.196Z,1478892668.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:08.572Z,1478892668.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:08.668Z,1478892668.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:08.973Z,1478892668.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:09.376Z,1478892669.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:09.464Z,1478892669.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:09.773Z,1478892669.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:10.177Z,1478892670.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:10.260Z,1478892670.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:10.633Z,1478892670.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:10.985Z,1478892670.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:11.016Z,1478892671.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:11.381Z,1478892671.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:11.781Z,1478892671.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:11.812Z,1478892671.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:12.146Z,1478892672.146 [PNI_TCM](ERROR): CRC does not match. Expected:0x6819 got:0x49147
2016-11-11T19:31:12.182Z,1478892672.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:12.609Z,1478892672.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:12.623Z,1478892672.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:12.973Z,1478892672.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:13.020Z,1478892673.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:13.380Z,1478892673.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:13.785Z,1478892673.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:13.816Z,1478892673.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:14.213Z,1478892674.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:14.544Z,1478892674.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:14.576Z,1478892674.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:14.982Z,1478892674.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:15.340Z,1478892675.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:15.361Z,1478892675.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:15.781Z,1478892675.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:16.137Z,1478892676.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:16.205Z,1478892676.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:16.548Z,1478892676.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:16.577Z,1478892676.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:16.981Z,1478892676.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:17.344Z,1478892677.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:17.381Z,1478892677.381 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T19:31:17.381Z,1478892677.381 [BPC1] Data Fault, FailCount= 1
2016-11-11T19:31:17.381Z,1478892677.381 [BPC1](ERROR): Data Fault
2016-11-11T19:31:17.390Z,1478892677.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:17.438Z,1478892677.438 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T19:31:17.775Z,1478892677.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:18.141Z,1478892678.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:18.187Z,1478892678.187 [PNI_TCM](ERROR): CRC does not match. Expected:0x56572 got:0x24344
2016-11-11T19:31:18.229Z,1478892678.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:18.580Z,1478892678.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:18.581Z,1478892678.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:18.621Z,1478892678.621 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:31:18.621Z,1478892678.621 [BPC1] No Fault, FailCount= 1
2016-11-11T19:31:19.022Z,1478892679.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:19.376Z,1478892679.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:19.382Z,1478892679.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:19.805Z,1478892679.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:20.172Z,1478892680.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:20.205Z,1478892680.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:20.568Z,1478892680.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:20.580Z,1478892680.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:20.974Z,1478892680.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:21.366Z,1478892681.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:21.376Z,1478892681.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:21.770Z,1478892681.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:22.169Z,1478892682.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:22.172Z,1478892682.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:22.574Z,1478892682.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:22.636Z,1478892682.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:22.982Z,1478892682.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:23.385Z,1478892683.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:23.432Z,1478892683.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:23.774Z,1478892683.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:24.146Z,1478892684.146 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T19:31:24.182Z,1478892684.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:24.228Z,1478892684.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:24.633Z,1478892684.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:24.967Z,1478892684.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:24.996Z,1478892684.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:25.384Z,1478892685.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:25.792Z,1478892685.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:25.794Z,1478892685.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:26.184Z,1478892686.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:26.589Z,1478892686.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:26.632Z,1478892686.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:26.991Z,1478892686.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:27.004Z,1478892687.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:27.359Z,1478892687.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:27.762Z,1478892687.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:27.800Z,1478892687.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:28.188Z,1478892688.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:28.512Z,1478892688.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:28.581Z,1478892688.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:28.983Z,1478892688.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:29.308Z,1478892689.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:29.389Z,1478892689.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:29.774Z,1478892689.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:30.110Z,1478892690.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:30.194Z,1478892690.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:30.585Z,1478892690.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:30.592Z,1478892690.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:30.954Z,1478892690.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:31.388Z,1478892691.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:31.405Z,1478892691.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:31.813Z,1478892691.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:32.181Z,1478892692.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:32.184Z,1478892692.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:32.592Z,1478892692.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:32.615Z,1478892692.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:32.977Z,1478892692.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:33.385Z,1478892693.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:33.388Z,1478892693.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:33.786Z,1478892693.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:34.179Z,1478892694.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:34.184Z,1478892694.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:34.575Z,1478892694.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:34.592Z,1478892694.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:34.983Z,1478892694.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:35.377Z,1478892695.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:35.388Z,1478892695.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:35.784Z,1478892695.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:36.185Z,1478892696.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:36.199Z,1478892696.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:36.567Z,1478892696.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:36.616Z,1478892696.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:36.964Z,1478892696.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:37.373Z,1478892697.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:37.412Z,1478892697.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:37.777Z,1478892697.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:38.175Z,1478892698.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:38.208Z,1478892698.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:38.646Z,1478892698.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:38.957Z,1478892698.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:38.972Z,1478892698.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:39.359Z,1478892699.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:39.761Z,1478892699.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:39.768Z,1478892699.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:40.165Z,1478892700.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:40.565Z,1478892700.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:40.636Z,1478892700.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:40.976Z,1478892700.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:40.983Z,1478892700.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:41.389Z,1478892701.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:41.772Z,1478892701.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:41.781Z,1478892701.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:42.185Z,1478892702.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:42.493Z,1478892702.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:42.568Z,1478892702.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:42.964Z,1478892702.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:43.288Z,1478892703.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:43.371Z,1478892703.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:43.781Z,1478892703.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:44.085Z,1478892704.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:44.180Z,1478892704.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:44.189Z,1478892704.189 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T19:26:44.1Z
2016-11-11T19:31:44.189Z,1478892704.189 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T19:31:44.189Z,1478892704.189 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T19:31:44.504Z,1478892704.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:44.574Z,1478892704.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:45.302Z,1478892705.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:45.442Z,1478892705.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:45.585Z,1478892705.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:46.097Z,1478892706.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:46.509Z,1478892706.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:47.304Z,1478892707.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:48.101Z,1478892708.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:48.520Z,1478892708.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:49.316Z,1478892709.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:50.112Z,1478892710.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:50.696Z,1478892710.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:51.492Z,1478892711.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:51.879Z,1478892711.879 [BPC1](ERROR): Failed to receive battery data
2016-11-11T19:31:51.880Z,1478892711.880 [BPC1] Communications Fault, FailCount= 1
2016-11-11T19:31:51.880Z,1478892711.880 [BPC1](ERROR): Communications Fault
2016-11-11T19:31:51.905Z,1478892711.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:51.993Z,1478892711.993 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T19:31:52.028Z,1478892712.028 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0340.lzma
2016-11-11T19:31:52.125Z,1478892712.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:52.288Z,1478892712.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:52.474Z,1478892712.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:52.810Z,1478892712.810 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0340.lzma.bak
2016-11-11T19:31:52.810Z,1478892712.810 [DataOverHttps](INFO): SBD MOMSN=4555694
2016-11-11T19:31:52.897Z,1478892712.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:31:52.957Z,1478892712.957 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:31:52.957Z,1478892712.957 [BPC1] No Fault, FailCount= 1
2016-11-11T19:31:52.960Z,1478892712.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:53.756Z,1478892713.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:54.553Z,1478892714.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:54.964Z,1478892714.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:55.760Z,1478892715.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:56.556Z,1478892716.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:57.352Z,1478892717.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:58.148Z,1478892718.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:58.944Z,1478892718.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:31:59.740Z,1478892719.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:00.536Z,1478892720.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:01.332Z,1478892721.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:02.128Z,1478892722.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:02.924Z,1478892722.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:03.574Z,1478892723.574 [NAL9602](INFO): Powering down
2016-11-11T19:32:03.720Z,1478892723.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:03.834Z,1478892723.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:04.109Z,1478892724.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:04.131Z,1478892724.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:04.544Z,1478892724.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:04.952Z,1478892724.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:05.360Z,1478892725.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:05.768Z,1478892725.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:06.564Z,1478892726.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:06.972Z,1478892726.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:07.769Z,1478892727.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:08.564Z,1478892728.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:08.625Z,1478892728.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:08.745Z,1478892728.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:08.972Z,1478892728.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:09.149Z,1478892729.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:09.549Z,1478892729.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:09.768Z,1478892729.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:09.932Z,1478892729.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:10.356Z,1478892730.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:10.457Z,1478892730.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:11.252Z,1478892731.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:12.049Z,1478892732.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:12.466Z,1478892732.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:13.261Z,1478892733.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:14.056Z,1478892734.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:14.464Z,1478892734.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:15.260Z,1478892735.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:16.056Z,1478892736.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:16.464Z,1478892736.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:16.637Z,1478892736.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:16.736Z,1478892736.736 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0341.lzma
2016-11-11T19:32:16.836Z,1478892736.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:17.205Z,1478892737.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:17.260Z,1478892737.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:17.514Z,1478892737.514 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0341.lzma.bak
2016-11-11T19:32:17.514Z,1478892737.514 [DataOverHttps](INFO): SBD MOMSN=4555696
2016-11-11T19:32:17.587Z,1478892737.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:18.057Z,1478892738.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:18.540Z,1478892738.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:19.336Z,1478892739.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:20.110Z,1478892740.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:20.132Z,1478892740.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:20.133Z,1478892740.133 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T19:32:20.133Z,1478892740.133 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T19:32:20.133Z,1478892740.133 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T19:32:20.274Z,1478892740.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:20.888Z,1478892740.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:21.684Z,1478892741.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:22.481Z,1478892742.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:22.892Z,1478892742.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:23.688Z,1478892743.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:24.420Z,1478892744.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:25.217Z,1478892745.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:26.013Z,1478892746.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:26.424Z,1478892746.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:27.220Z,1478892747.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:27.326Z,1478892747.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:27.518Z,1478892747.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:27.891Z,1478892747.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:28.018Z,1478892748.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:28.296Z,1478892748.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:28.432Z,1478892748.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:28.682Z,1478892748.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:29.096Z,1478892749.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:29.229Z,1478892749.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:29.481Z,1478892749.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:29.882Z,1478892749.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:30.024Z,1478892750.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:30.281Z,1478892750.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:30.432Z,1478892750.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:30.689Z,1478892750.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:31.094Z,1478892751.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:31.228Z,1478892751.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:31.481Z,1478892751.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:31.881Z,1478892751.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:32.024Z,1478892752.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:32.278Z,1478892752.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:32.508Z,1478892752.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:32.681Z,1478892752.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:33.073Z,1478892753.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:33.305Z,1478892753.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:33.490Z,1478892753.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:33.889Z,1478892753.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:34.100Z,1478892754.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:34.272Z,1478892754.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:34.688Z,1478892754.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:34.868Z,1478892754.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:35.073Z,1478892755.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:35.467Z,1478892755.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:35.664Z,1478892755.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:35.871Z,1478892755.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:36.283Z,1478892756.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:36.461Z,1478892756.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:36.677Z,1478892756.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:36.872Z,1478892756.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:37.080Z,1478892757.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:37.479Z,1478892757.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:37.668Z,1478892757.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:37.892Z,1478892757.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:38.272Z,1478892758.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:38.396Z,1478892758.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:38.673Z,1478892758.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:39.133Z,1478892759.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:39.192Z,1478892759.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:39.479Z,1478892759.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:39.890Z,1478892759.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:39.989Z,1478892759.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:40.273Z,1478892760.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:40.400Z,1478892760.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:40.695Z,1478892760.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:41.101Z,1478892761.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:41.196Z,1478892761.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:41.466Z,1478892761.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:41.875Z,1478892761.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:41.994Z,1478892761.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:42.268Z,1478892762.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:42.412Z,1478892762.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:42.667Z,1478892762.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:43.074Z,1478892763.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:43.208Z,1478892763.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:43.473Z,1478892763.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:43.873Z,1478892763.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:44.004Z,1478892764.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:44.282Z,1478892764.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:44.416Z,1478892764.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:44.679Z,1478892764.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:45.083Z,1478892765.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:45.213Z,1478892765.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:45.479Z,1478892765.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:45.878Z,1478892765.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:46.008Z,1478892766.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:46.280Z,1478892766.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:46.480Z,1478892766.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:46.680Z,1478892766.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:47.079Z,1478892767.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:47.276Z,1478892767.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:47.480Z,1478892767.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:47.879Z,1478892767.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:48.072Z,1478892768.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:48.281Z,1478892768.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:48.676Z,1478892768.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:48.836Z,1478892768.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:49.082Z,1478892769.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:49.460Z,1478892769.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:49.632Z,1478892769.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:49.865Z,1478892769.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:50.273Z,1478892770.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:50.429Z,1478892770.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:50.671Z,1478892770.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:50.844Z,1478892770.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:51.068Z,1478892771.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:51.473Z,1478892771.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:51.640Z,1478892771.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:51.881Z,1478892771.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:52.267Z,1478892772.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:52.376Z,1478892772.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:52.705Z,1478892772.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:53.086Z,1478892773.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:53.172Z,1478892773.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:53.473Z,1478892773.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:53.883Z,1478892773.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:53.969Z,1478892773.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:54.305Z,1478892774.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:54.380Z,1478892774.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:54.677Z,1478892774.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:55.110Z,1478892775.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:55.176Z,1478892775.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:55.494Z,1478892775.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:55.877Z,1478892775.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:55.973Z,1478892775.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:56.278Z,1478892776.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:56.384Z,1478892776.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:56.686Z,1478892776.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:57.085Z,1478892777.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:57.180Z,1478892777.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:57.460Z,1478892777.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:57.865Z,1478892777.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:57.977Z,1478892777.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:58.326Z,1478892778.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:58.388Z,1478892778.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:58.668Z,1478892778.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:59.081Z,1478892779.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:59.184Z,1478892779.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:32:59.481Z,1478892779.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:59.870Z,1478892779.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:32:59.980Z,1478892779.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:00.275Z,1478892780.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:00.468Z,1478892780.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:00.676Z,1478892780.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:01.076Z,1478892781.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:01.264Z,1478892781.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:01.479Z,1478892781.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:01.887Z,1478892781.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:02.062Z,1478892782.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:02.280Z,1478892782.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:02.685Z,1478892782.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:02.820Z,1478892782.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:03.080Z,1478892783.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:03.480Z,1478892783.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:03.616Z,1478892783.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:03.880Z,1478892783.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:04.280Z,1478892784.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:04.413Z,1478892784.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:04.679Z,1478892784.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:04.836Z,1478892784.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:05.078Z,1478892785.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:05.461Z,1478892785.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:05.632Z,1478892785.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:05.863Z,1478892785.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:06.267Z,1478892786.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:06.356Z,1478892786.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:06.673Z,1478892786.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:07.109Z,1478892787.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:07.152Z,1478892787.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:07.503Z,1478892787.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:07.872Z,1478892787.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:07.949Z,1478892787.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:08.301Z,1478892788.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:08.364Z,1478892788.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:08.671Z,1478892788.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:09.090Z,1478892789.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:09.160Z,1478892789.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:09.508Z,1478892789.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:09.881Z,1478892789.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:09.957Z,1478892789.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:10.269Z,1478892790.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:10.368Z,1478892790.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:10.663Z,1478892790.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:11.068Z,1478892791.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:11.164Z,1478892791.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:11.473Z,1478892791.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:11.867Z,1478892791.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:11.960Z,1478892791.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:12.276Z,1478892792.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:12.368Z,1478892792.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:12.678Z,1478892792.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:13.068Z,1478892793.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:13.164Z,1478892793.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:13.485Z,1478892793.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:13.872Z,1478892793.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:13.960Z,1478892793.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:14.265Z,1478892794.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:14.444Z,1478892794.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:14.689Z,1478892794.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:15.065Z,1478892795.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:15.240Z,1478892795.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:15.465Z,1478892795.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:15.867Z,1478892795.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:16.036Z,1478892796.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:16.273Z,1478892796.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:16.667Z,1478892796.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:16.796Z,1478892796.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:17.071Z,1478892797.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:17.471Z,1478892797.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:17.592Z,1478892797.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:17.878Z,1478892797.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:18.282Z,1478892798.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:18.389Z,1478892798.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:18.677Z,1478892798.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:18.800Z,1478892798.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:19.065Z,1478892799.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:19.466Z,1478892799.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:19.596Z,1478892799.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:19.865Z,1478892799.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:20.266Z,1478892800.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:20.320Z,1478892800.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:20.675Z,1478892800.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:21.116Z,1478892801.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:21.913Z,1478892801.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:22.332Z,1478892802.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:23.128Z,1478892803.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:23.925Z,1478892803.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:24.141Z,1478892804.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:24.293Z,1478892804.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:24.340Z,1478892804.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:24.637Z,1478892804.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:25.062Z,1478892805.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:25.137Z,1478892805.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:25.443Z,1478892805.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:25.919Z,1478892805.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:25.933Z,1478892805.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:26.258Z,1478892806.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:26.344Z,1478892806.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:26.640Z,1478892806.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:27.035Z,1478892807.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:27.140Z,1478892807.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:27.445Z,1478892807.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:27.844Z,1478892807.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:27.936Z,1478892807.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:28.243Z,1478892808.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:28.424Z,1478892808.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:28.651Z,1478892808.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:29.038Z,1478892809.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:29.220Z,1478892809.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:29.444Z,1478892809.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:29.845Z,1478892809.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:30.016Z,1478892810.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:30.245Z,1478892810.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:30.657Z,1478892810.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:30.768Z,1478892810.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:31.025Z,1478892811.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:31.454Z,1478892811.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:31.564Z,1478892811.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:31.853Z,1478892811.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:32.257Z,1478892812.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:32.361Z,1478892812.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:32.628Z,1478892812.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:32.772Z,1478892812.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:33.053Z,1478892813.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:33.436Z,1478892813.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:33.568Z,1478892813.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:33.831Z,1478892813.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:34.244Z,1478892814.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:34.312Z,1478892814.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:34.649Z,1478892814.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:35.053Z,1478892815.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:35.108Z,1478892815.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:35.433Z,1478892815.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:35.837Z,1478892815.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:35.905Z,1478892815.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:36.234Z,1478892816.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:36.328Z,1478892816.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:36.641Z,1478892816.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:37.039Z,1478892817.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:37.124Z,1478892817.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:37.435Z,1478892817.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:37.849Z,1478892817.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:37.921Z,1478892817.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:38.288Z,1478892818.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:38.332Z,1478892818.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:38.648Z,1478892818.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:39.069Z,1478892819.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:39.128Z,1478892819.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:39.434Z,1478892819.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:39.890Z,1478892819.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:39.924Z,1478892819.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:40.274Z,1478892820.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:40.332Z,1478892820.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:40.646Z,1478892820.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:41.036Z,1478892821.036 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:41.037Z,1478892821.037 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 274
2016-11-11T19:33:41.037Z,1478892821.037 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:33:41.043Z,1478892821.043 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:41.044Z,1478892821.044 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 274
2016-11-11T19:33:41.044Z,1478892821.044 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:33:41.046Z,1478892821.046 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:41.046Z,1478892821.046 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 274
2016-11-11T19:33:41.046Z,1478892821.046 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:33:41.060Z,1478892821.060 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:33:41.061Z,1478892821.061 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:33:41.061Z,1478892821.061 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:33:41.128Z,1478892821.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:41.463Z,1478892821.463 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:33:41.463Z,1478892821.463 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 274
2016-11-11T19:33:41.464Z,1478892821.464 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:33:41.464Z,1478892821.464 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 274
2016-11-11T19:33:41.465Z,1478892821.465 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:33:41.465Z,1478892821.465 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 274
2016-11-11T19:33:41.854Z,1478892821.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:33:41.855Z,1478892821.855 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:33:41.855Z,1478892821.855 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:33:41.875Z,1478892821.875 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:33:41.876Z,1478892821.876 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:33:41.876Z,1478892821.876 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:33:41.877Z,1478892821.876 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:33:41.877Z,1478892821.877 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:33:41.877Z,1478892821.877 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:33:41.924Z,1478892821.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:42.240Z,1478892822.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:42.400Z,1478892822.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:42.649Z,1478892822.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:43.044Z,1478892823.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:43.196Z,1478892823.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:43.438Z,1478892823.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:43.845Z,1478892823.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:43.992Z,1478892823.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:44.246Z,1478892824.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:44.638Z,1478892824.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:44.748Z,1478892824.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:45.049Z,1478892825.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:45.437Z,1478892825.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:45.544Z,1478892825.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:45.844Z,1478892825.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:46.247Z,1478892826.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:46.341Z,1478892826.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:46.644Z,1478892826.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:46.752Z,1478892826.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:47.038Z,1478892827.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:47.443Z,1478892827.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:47.548Z,1478892827.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:47.919Z,1478892827.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:48.235Z,1478892828.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:48.280Z,1478892828.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:48.636Z,1478892828.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:49.038Z,1478892829.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:49.076Z,1478892829.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:49.435Z,1478892829.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:49.873Z,1478892829.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:49.894Z,1478892829.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:50.244Z,1478892830.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:50.284Z,1478892830.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:50.644Z,1478892830.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:51.044Z,1478892831.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:51.080Z,1478892831.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:51.456Z,1478892831.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:51.876Z,1478892831.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:51.894Z,1478892831.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:52.236Z,1478892832.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:52.288Z,1478892832.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:52.692Z,1478892832.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:53.036Z,1478892833.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:53.084Z,1478892833.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:53.477Z,1478892833.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:53.881Z,1478892833.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:53.909Z,1478892833.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:54.265Z,1478892834.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:54.292Z,1478892834.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:54.689Z,1478892834.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:55.046Z,1478892835.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:55.088Z,1478892835.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:55.438Z,1478892835.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:55.845Z,1478892835.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:55.885Z,1478892835.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:56.233Z,1478892836.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:56.364Z,1478892836.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:56.634Z,1478892836.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:57.042Z,1478892837.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:57.160Z,1478892837.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:57.441Z,1478892837.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:57.845Z,1478892837.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:57.956Z,1478892837.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:58.244Z,1478892838.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:58.645Z,1478892838.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:58.720Z,1478892838.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:59.036Z,1478892839.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:59.454Z,1478892839.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:33:59.516Z,1478892839.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:33:59.841Z,1478892839.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:00.235Z,1478892840.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:00.312Z,1478892840.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:00.644Z,1478892840.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:00.724Z,1478892840.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:01.046Z,1478892841.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:01.437Z,1478892841.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:01.521Z,1478892841.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:01.915Z,1478892841.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:02.249Z,1478892842.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:02.269Z,1478892842.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:02.646Z,1478892842.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:03.046Z,1478892843.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:03.064Z,1478892843.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:03.448Z,1478892843.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:03.860Z,1478892843.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:03.888Z,1478892843.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:04.254Z,1478892844.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:04.280Z,1478892844.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:04.647Z,1478892844.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:05.035Z,1478892845.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:05.076Z,1478892845.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:05.447Z,1478892845.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:05.872Z,1478892845.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:05.890Z,1478892845.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:06.262Z,1478892846.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:06.280Z,1478892846.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:06.649Z,1478892846.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:07.075Z,1478892847.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:07.076Z,1478892847.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:07.428Z,1478892847.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:07.872Z,1478892847.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:07.897Z,1478892847.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:08.280Z,1478892848.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:08.290Z,1478892848.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:08.648Z,1478892848.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:09.062Z,1478892849.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:09.084Z,1478892849.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:09.444Z,1478892849.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:09.867Z,1478892849.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:09.880Z,1478892849.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:10.245Z,1478892850.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:10.356Z,1478892850.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:10.642Z,1478892850.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:11.041Z,1478892851.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:11.152Z,1478892851.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:11.445Z,1478892851.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:11.846Z,1478892851.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:11.948Z,1478892851.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:12.238Z,1478892852.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:12.649Z,1478892852.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:12.720Z,1478892852.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:13.028Z,1478892853.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:13.433Z,1478892853.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:13.516Z,1478892853.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:13.861Z,1478892853.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:14.239Z,1478892854.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:14.313Z,1478892854.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:14.640Z,1478892854.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:14.724Z,1478892854.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:15.048Z,1478892855.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:15.440Z,1478892855.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:15.520Z,1478892855.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:15.894Z,1478892855.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:16.255Z,1478892856.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:16.276Z,1478892856.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:16.637Z,1478892856.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:17.038Z,1478892857.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:17.072Z,1478892857.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:17.439Z,1478892857.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:17.868Z,1478892857.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:17.876Z,1478892857.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:18.235Z,1478892858.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:18.276Z,1478892858.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:18.648Z,1478892858.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:19.041Z,1478892859.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:19.072Z,1478892859.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:19.456Z,1478892859.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:19.868Z,1478892859.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:19.912Z,1478892859.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:20.253Z,1478892860.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:20.276Z,1478892860.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:20.644Z,1478892860.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:21.033Z,1478892861.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:21.072Z,1478892861.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:21.868Z,1478892861.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:22.276Z,1478892862.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:23.072Z,1478892863.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:23.868Z,1478892863.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:24.316Z,1478892864.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:24.478Z,1478892864.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:24.613Z,1478892864.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:24.989Z,1478892864.989 [BPC1](ERROR): Failed to receive battery data
2016-11-11T19:34:24.989Z,1478892864.989 [BPC1] Communications Fault, FailCount= 1
2016-11-11T19:34:24.989Z,1478892864.989 [BPC1](ERROR): Communications Fault
2016-11-11T19:34:25.042Z,1478892865.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:25.086Z,1478892865.086 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T19:34:25.112Z,1478892865.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:25.396Z,1478892865.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:25.797Z,1478892865.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:25.909Z,1478892865.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:26.201Z,1478892866.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:26.314Z,1478892866.314 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:34:26.314Z,1478892866.314 [BPC1] No Fault, FailCount= 1
2016-11-11T19:34:26.661Z,1478892866.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:26.680Z,1478892866.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:27.025Z,1478892867.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:27.412Z,1478892867.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:27.476Z,1478892867.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:27.812Z,1478892867.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:28.208Z,1478892868.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:28.272Z,1478892868.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:28.629Z,1478892868.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:28.700Z,1478892868.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:29.001Z,1478892869.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:29.400Z,1478892869.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:29.496Z,1478892869.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:29.881Z,1478892869.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:30.213Z,1478892870.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:30.236Z,1478892870.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:30.600Z,1478892870.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:31.007Z,1478892871.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:31.032Z,1478892871.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:31.405Z,1478892871.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:31.828Z,1478892871.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:31.866Z,1478892871.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:32.215Z,1478892872.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:32.240Z,1478892872.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:32.597Z,1478892872.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:32.996Z,1478892872.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:33.036Z,1478892873.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:33.415Z,1478892873.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:33.832Z,1478892873.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:33.876Z,1478892873.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:34.218Z,1478892874.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:34.244Z,1478892874.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:34.610Z,1478892874.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:35.021Z,1478892875.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:35.040Z,1478892875.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:35.399Z,1478892875.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:35.836Z,1478892875.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:35.891Z,1478892875.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:36.222Z,1478892876.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:36.244Z,1478892876.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:36.620Z,1478892876.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:36.998Z,1478892876.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:37.040Z,1478892877.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:37.405Z,1478892877.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:37.836Z,1478892877.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:37.839Z,1478892877.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:38.221Z,1478892878.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:38.312Z,1478892878.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:38.592Z,1478892878.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:39.025Z,1478892879.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:39.108Z,1478892879.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:39.418Z,1478892879.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:39.837Z,1478892879.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:39.905Z,1478892879.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:40.254Z,1478892880.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:40.603Z,1478892880.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:40.668Z,1478892880.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:41.006Z,1478892881.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:41.410Z,1478892881.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:41.464Z,1478892881.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:41.805Z,1478892881.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:42.261Z,1478892882.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:42.277Z,1478892882.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:42.593Z,1478892882.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:42.672Z,1478892882.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:43.000Z,1478892883.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:43.398Z,1478892883.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:43.468Z,1478892883.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:43.818Z,1478892883.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:44.213Z,1478892884.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:44.236Z,1478892884.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:44.615Z,1478892884.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:44.998Z,1478892884.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:45.032Z,1478892885.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:45.403Z,1478892885.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:45.828Z,1478892885.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:45.844Z,1478892885.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:46.234Z,1478892886.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:46.236Z,1478892886.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:46.624Z,1478892886.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:47.005Z,1478892887.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:47.032Z,1478892887.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:47.402Z,1478892887.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:47.828Z,1478892887.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:47.851Z,1478892887.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:48.221Z,1478892888.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:48.236Z,1478892888.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:48.604Z,1478892888.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:49.006Z,1478892889.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:49.032Z,1478892889.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:49.404Z,1478892889.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:49.828Z,1478892889.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:49.870Z,1478892889.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:50.218Z,1478892890.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:50.236Z,1478892890.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:50.645Z,1478892890.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:51.012Z,1478892891.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:51.032Z,1478892891.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:51.417Z,1478892891.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:51.803Z,1478892891.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:51.828Z,1478892891.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:52.241Z,1478892892.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:52.284Z,1478892892.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:52.594Z,1478892892.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:53.041Z,1478892893.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:53.080Z,1478892893.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:53.419Z,1478892893.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:53.824Z,1478892893.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:53.876Z,1478892893.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:54.243Z,1478892894.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:54.608Z,1478892894.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:54.672Z,1478892894.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:55.016Z,1478892895.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:55.080Z,1478892895.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:55.413Z,1478892895.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:55.810Z,1478892895.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:55.876Z,1478892895.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:56.269Z,1478892896.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:56.612Z,1478892896.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:56.640Z,1478892896.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:56.995Z,1478892896.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:57.401Z,1478892897.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:57.436Z,1478892897.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:57.851Z,1478892897.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:58.176Z,1478892898.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:58.221Z,1478892898.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:58.585Z,1478892898.585 [PNI_TCM](ERROR): CRC does not match. Expected:0x47939 got:0x23671
2016-11-11T19:34:58.624Z,1478892898.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:58.973Z,1478892898.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:59.001Z,1478892899.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:59.419Z,1478892899.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:34:59.769Z,1478892899.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:34:59.855Z,1478892899.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:00.220Z,1478892900.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:00.252Z,1478892900.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:00.605Z,1478892900.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:01.017Z,1478892901.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:01.048Z,1478892901.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:01.394Z,1478892901.394 [PNI_TCM](ERROR): CRC does not match. Expected:0x65015 got:0x49579
2016-11-11T19:35:01.414Z,1478892901.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:01.838Z,1478892901.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:01.844Z,1478892901.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:02.207Z,1478892902.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:02.252Z,1478892902.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:02.615Z,1478892902.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:03.004Z,1478892903.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:03.048Z,1478892903.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:03.405Z,1478892903.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:03.829Z,1478892903.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:03.844Z,1478892903.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:04.207Z,1478892904.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:04.252Z,1478892904.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:04.586Z,1478892904.586 [PNI_TCM](ERROR): CRC does not match. Expected:0x841 got:0x46617
2016-11-11T19:35:04.621Z,1478892904.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:05.018Z,1478892905.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:05.048Z,1478892905.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:05.420Z,1478892905.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:05.842Z,1478892905.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:05.845Z,1478892905.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:06.238Z,1478892906.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:06.264Z,1478892906.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:06.594Z,1478892906.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:07.001Z,1478892907.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:07.060Z,1478892907.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:07.431Z,1478892907.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:07.830Z,1478892907.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:07.864Z,1478892907.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:08.287Z,1478892908.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:08.604Z,1478892908.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:08.632Z,1478892908.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:09.032Z,1478892909.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:09.410Z,1478892909.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:09.428Z,1478892909.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:09.804Z,1478892909.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:10.224Z,1478892910.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:10.253Z,1478892910.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:10.602Z,1478892910.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:10.652Z,1478892910.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:11.017Z,1478892911.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:11.400Z,1478892911.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:11.448Z,1478892911.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:11.813Z,1478892911.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:12.144Z,1478892912.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:12.218Z,1478892912.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:12.604Z,1478892912.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:12.940Z,1478892912.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:13.005Z,1478892913.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:13.412Z,1478892913.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:13.737Z,1478892913.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:13.828Z,1478892913.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:14.148Z,1478892914.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:14.206Z,1478892914.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:14.606Z,1478892914.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:14.944Z,1478892914.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:15.008Z,1478892915.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:15.411Z,1478892915.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:15.741Z,1478892915.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:15.834Z,1478892915.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:16.152Z,1478892916.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:16.204Z,1478892916.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:16.599Z,1478892916.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:16.948Z,1478892916.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:17.020Z,1478892917.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:17.412Z,1478892917.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:17.745Z,1478892917.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:17.831Z,1478892917.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:18.168Z,1478892918.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:18.218Z,1478892918.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:18.594Z,1478892918.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:18.964Z,1478892918.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:19.020Z,1478892919.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:19.401Z,1478892919.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:19.760Z,1478892919.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:19.911Z,1478892919.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:20.202Z,1478892920.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:20.248Z,1478892920.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:20.608Z,1478892920.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:21.044Z,1478892921.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:21.046Z,1478892921.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:21.409Z,1478892921.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:21.840Z,1478892921.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:22.596Z,1478892922.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:23.392Z,1478892923.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:24.188Z,1478892924.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:24.600Z,1478892924.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:25.014Z,1478892925.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:25.153Z,1478892925.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:25.396Z,1478892925.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:25.550Z,1478892925.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:25.934Z,1478892925.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:26.120Z,1478892926.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:26.315Z,1478892926.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:26.723Z,1478892926.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:26.916Z,1478892926.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:27.122Z,1478892927.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:27.512Z,1478892927.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:27.713Z,1478892927.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:27.925Z,1478892927.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:28.128Z,1478892928.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:28.313Z,1478892928.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:28.713Z,1478892928.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:28.924Z,1478892928.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:29.127Z,1478892929.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:29.513Z,1478892929.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:29.721Z,1478892929.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:29.923Z,1478892929.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:30.136Z,1478892930.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:30.321Z,1478892930.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:30.723Z,1478892930.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:30.932Z,1478892930.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:31.120Z,1478892931.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:31.520Z,1478892931.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:31.733Z,1478892931.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:31.915Z,1478892931.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:32.146Z,1478892932.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:32.318Z,1478892932.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:32.721Z,1478892932.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:32.941Z,1478892932.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:33.116Z,1478892933.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:33.525Z,1478892933.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:33.736Z,1478892933.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:33.925Z,1478892933.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:34.220Z,1478892934.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:34.325Z,1478892934.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:34.725Z,1478892934.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:35.016Z,1478892935.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:35.124Z,1478892935.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:35.533Z,1478892935.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:35.812Z,1478892935.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:35.924Z,1478892935.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:36.324Z,1478892936.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:36.568Z,1478892936.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:36.745Z,1478892936.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:37.125Z,1478892937.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:37.366Z,1478892937.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:37.509Z,1478892937.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:37.950Z,1478892937.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:38.161Z,1478892938.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:38.310Z,1478892938.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:38.576Z,1478892938.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:38.750Z,1478892938.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:39.110Z,1478892939.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:39.372Z,1478892939.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:39.545Z,1478892939.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:39.949Z,1478892939.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:40.100Z,1478892940.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:40.315Z,1478892940.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:40.717Z,1478892940.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:40.896Z,1478892940.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:41.112Z,1478892941.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:41.521Z,1478892941.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:41.695Z,1478892941.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:41.919Z,1478892941.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:42.112Z,1478892942.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:42.320Z,1478892942.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:42.722Z,1478892942.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:42.908Z,1478892942.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:43.117Z,1478892943.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:43.520Z,1478892943.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:43.705Z,1478892943.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:43.919Z,1478892943.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:44.116Z,1478892944.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:44.314Z,1478892944.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:44.720Z,1478892944.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:44.912Z,1478892944.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:45.122Z,1478892945.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:45.514Z,1478892945.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:45.709Z,1478892945.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:45.923Z,1478892945.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:46.120Z,1478892946.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:46.321Z,1478892946.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:46.720Z,1478892946.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:46.916Z,1478892946.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:47.120Z,1478892947.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:47.525Z,1478892947.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:47.712Z,1478892947.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:47.926Z,1478892947.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:48.188Z,1478892948.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:48.323Z,1478892948.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:48.721Z,1478892948.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:48.984Z,1478892948.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:49.104Z,1478892949.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:49.509Z,1478892949.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:49.780Z,1478892949.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:49.937Z,1478892949.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:50.309Z,1478892950.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:50.548Z,1478892950.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:50.749Z,1478892950.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:51.121Z,1478892951.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:51.344Z,1478892951.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:51.513Z,1478892951.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:51.930Z,1478892951.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:52.140Z,1478892952.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:52.319Z,1478892952.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:52.568Z,1478892952.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:52.717Z,1478892952.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:53.145Z,1478892953.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:53.364Z,1478892953.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:53.517Z,1478892953.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:53.945Z,1478892953.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:54.076Z,1478892954.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:54.334Z,1478892954.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:54.724Z,1478892954.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:54.872Z,1478892954.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:55.123Z,1478892955.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:55.523Z,1478892955.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:55.669Z,1478892955.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:55.922Z,1478892955.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:56.081Z,1478892956.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:56.320Z,1478892956.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:56.731Z,1478892956.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:56.876Z,1478892956.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:57.129Z,1478892957.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:57.509Z,1478892957.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:57.673Z,1478892957.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:57.936Z,1478892957.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:58.084Z,1478892958.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:58.308Z,1478892958.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:58.709Z,1478892958.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:58.880Z,1478892958.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:59.113Z,1478892959.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:59.516Z,1478892959.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:35:59.677Z,1478892959.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:35:59.911Z,1478892959.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:00.092Z,1478892960.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:00.317Z,1478892960.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:00.715Z,1478892960.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:00.890Z,1478892960.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:01.111Z,1478892961.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:01.525Z,1478892961.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:01.684Z,1478892961.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:01.922Z,1478892961.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:02.172Z,1478892962.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:02.312Z,1478892962.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:02.713Z,1478892962.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:02.968Z,1478892962.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:03.123Z,1478892963.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:03.521Z,1478892963.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:03.764Z,1478892963.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:03.914Z,1478892963.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:04.321Z,1478892964.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:04.530Z,1478892964.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:04.718Z,1478892964.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:05.130Z,1478892965.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:05.324Z,1478892965.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:05.523Z,1478892965.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:05.914Z,1478892965.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:06.121Z,1478892966.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:06.321Z,1478892966.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:06.536Z,1478892966.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:06.741Z,1478892966.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:07.120Z,1478892967.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:07.332Z,1478892967.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:07.537Z,1478892967.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:07.929Z,1478892967.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:08.056Z,1478892968.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:08.336Z,1478892968.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:08.741Z,1478892968.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:08.852Z,1478892968.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:09.125Z,1478892969.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:09.516Z,1478892969.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:09.649Z,1478892969.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:09.932Z,1478892969.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:10.060Z,1478892970.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:10.309Z,1478892970.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:10.709Z,1478892970.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:10.857Z,1478892970.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:11.109Z,1478892971.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:11.513Z,1478892971.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:11.664Z,1478892971.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:11.921Z,1478892971.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:12.088Z,1478892972.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:12.311Z,1478892972.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:12.331Z,1478892972.331 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T19:36:12.710Z,1478892972.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:12.884Z,1478892972.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:13.112Z,1478892973.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:13.517Z,1478892973.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:13.680Z,1478892973.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:13.917Z,1478892973.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:14.088Z,1478892974.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:14.311Z,1478892974.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:14.717Z,1478892974.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:14.884Z,1478892974.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:15.117Z,1478892975.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:15.513Z,1478892975.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:15.680Z,1478892975.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:15.920Z,1478892975.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:16.152Z,1478892976.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:16.315Z,1478892976.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:16.714Z,1478892976.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:16.948Z,1478892976.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:17.117Z,1478892977.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:17.522Z,1478892977.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:17.744Z,1478892977.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:17.914Z,1478892977.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:18.312Z,1478892978.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:18.508Z,1478892978.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:18.721Z,1478892978.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:19.119Z,1478892979.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:19.304Z,1478892979.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:19.545Z,1478892979.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:19.928Z,1478892979.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:20.101Z,1478892980.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:20.325Z,1478892980.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:20.516Z,1478892980.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:20.708Z,1478892980.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:21.149Z,1478892981.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:21.312Z,1478892981.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:21.511Z,1478892981.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:22.033Z,1478892982.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:22.829Z,1478892982.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:23.625Z,1478892983.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:24.056Z,1478892984.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:24.852Z,1478892984.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:25.058Z,1478892985.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:25.193Z,1478892985.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:25.574Z,1478892985.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:25.648Z,1478892985.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:25.985Z,1478892985.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:26.060Z,1478892986.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:26.340Z,1478892986.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:26.745Z,1478892986.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:26.856Z,1478892986.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:27.145Z,1478892987.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:27.546Z,1478892987.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:27.652Z,1478892987.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:27.961Z,1478892987.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:28.060Z,1478892988.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:28.349Z,1478892988.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:28.749Z,1478892988.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:28.856Z,1478892988.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:29.152Z,1478892989.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:29.558Z,1478892989.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:29.652Z,1478892989.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:29.955Z,1478892989.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:30.144Z,1478892990.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:30.353Z,1478892990.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:30.753Z,1478892990.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:30.940Z,1478892990.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:31.153Z,1478892991.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:31.553Z,1478892991.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:31.736Z,1478892991.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:31.958Z,1478892991.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:32.353Z,1478892992.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:32.484Z,1478892992.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:32.757Z,1478892992.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:33.157Z,1478892993.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:33.280Z,1478892993.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:33.554Z,1478892993.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:33.956Z,1478892993.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:34.077Z,1478892994.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:34.361Z,1478892994.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:34.488Z,1478892994.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:34.760Z,1478892994.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:35.159Z,1478892995.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:35.284Z,1478892995.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:35.561Z,1478892995.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:35.952Z,1478892995.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:36.021Z,1478892996.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:36.347Z,1478892996.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:36.785Z,1478892996.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:36.816Z,1478892996.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:37.155Z,1478892997.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:37.553Z,1478892997.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:37.613Z,1478892997.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:37.953Z,1478892997.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:38.024Z,1478892998.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:38.381Z,1478892998.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:38.759Z,1478892998.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:38.820Z,1478892998.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:39.161Z,1478892999.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:39.613Z,1478892999.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:39.617Z,1478892999.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:39.969Z,1478892999.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:40.032Z,1478893000.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:40.369Z,1478893000.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:40.765Z,1478893000.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:40.828Z,1478893000.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:41.174Z,1478893001.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:41.562Z,1478893001.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:41.624Z,1478893001.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:41.948Z,1478893001.948 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:41.948Z,1478893001.948 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 275
2016-11-11T19:36:41.948Z,1478893001.948 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:36:41.955Z,1478893001.955 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:41.975Z,1478893001.975 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 275
2016-11-11T19:36:41.975Z,1478893001.975 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:36:41.977Z,1478893001.977 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:41.977Z,1478893001.977 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 275
2016-11-11T19:36:41.978Z,1478893001.977 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:36:42.013Z,1478893002.013 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:36:42.013Z,1478893002.013 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:36:42.013Z,1478893002.013 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:36:42.036Z,1478893002.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:42.382Z,1478893002.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:36:42.382Z,1478893002.382 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 275
2016-11-11T19:36:42.383Z,1478893002.383 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:36:42.383Z,1478893002.383 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 275
2016-11-11T19:36:42.384Z,1478893002.384 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:36:42.384Z,1478893002.384 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 275
2016-11-11T19:36:42.755Z,1478893002.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:36:42.756Z,1478893002.756 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:36:42.756Z,1478893002.756 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:36:42.761Z,1478893002.760 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:36:42.761Z,1478893002.761 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:36:42.761Z,1478893002.761 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:36:42.762Z,1478893002.762 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:36:42.762Z,1478893002.762 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:36:42.763Z,1478893002.763 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:36:42.832Z,1478893002.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:43.148Z,1478893003.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:43.546Z,1478893003.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:43.628Z,1478893003.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:43.953Z,1478893003.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:44.116Z,1478893004.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:44.355Z,1478893004.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:44.757Z,1478893004.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:44.912Z,1478893004.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:45.149Z,1478893005.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:45.556Z,1478893005.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:45.708Z,1478893005.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:45.973Z,1478893005.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:46.361Z,1478893006.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:46.464Z,1478893006.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:46.757Z,1478893006.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:47.159Z,1478893007.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:47.260Z,1478893007.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:47.560Z,1478893007.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:47.961Z,1478893007.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:48.057Z,1478893008.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:48.345Z,1478893008.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:48.472Z,1478893008.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:48.775Z,1478893008.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:49.168Z,1478893009.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:49.276Z,1478893009.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:49.626Z,1478893009.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:49.977Z,1478893009.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:50.000Z,1478893010.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:50.366Z,1478893010.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:50.761Z,1478893010.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:50.796Z,1478893010.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:51.169Z,1478893011.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:51.593Z,1478893011.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:51.650Z,1478893011.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:51.982Z,1478893011.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:52.008Z,1478893012.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:52.383Z,1478893012.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:52.755Z,1478893012.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:52.804Z,1478893012.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:53.161Z,1478893013.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:53.601Z,1478893013.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:53.627Z,1478893013.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:53.966Z,1478893013.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:54.024Z,1478893014.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:54.378Z,1478893014.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:54.786Z,1478893014.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:54.820Z,1478893014.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:55.196Z,1478893015.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:55.608Z,1478893015.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:55.616Z,1478893015.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:55.962Z,1478893015.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:56.028Z,1478893016.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:56.333Z,1478893016.333 [BPC1](ERROR): Failed to receive battery data
2016-11-11T19:36:56.333Z,1478893016.333 [BPC1] Communications Fault, FailCount= 1
2016-11-11T19:36:56.333Z,1478893016.333 [BPC1](ERROR): Communications Fault
2016-11-11T19:36:56.374Z,1478893016.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:56.438Z,1478893016.438 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T19:36:56.779Z,1478893016.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:56.824Z,1478893016.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:57.193Z,1478893017.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:57.569Z,1478893017.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:57.612Z,1478893017.612 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:36:57.612Z,1478893017.612 [BPC1] No Fault, FailCount= 1
2016-11-11T19:36:57.620Z,1478893017.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:58.018Z,1478893018.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:58.092Z,1478893018.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:58.405Z,1478893018.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:58.754Z,1478893018.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:58.888Z,1478893018.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:59.154Z,1478893019.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:59.572Z,1478893019.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:36:59.684Z,1478893019.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:36:59.962Z,1478893019.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:00.345Z,1478893020.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:00.444Z,1478893020.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:00.743Z,1478893020.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:01.146Z,1478893021.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:01.240Z,1478893021.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:01.554Z,1478893021.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:01.947Z,1478893021.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:02.037Z,1478893022.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:02.347Z,1478893022.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:02.448Z,1478893022.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:02.838Z,1478893022.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:03.161Z,1478893023.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:03.244Z,1478893023.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:03.618Z,1478893023.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:03.967Z,1478893023.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:03.988Z,1478893023.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:04.381Z,1478893024.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:04.778Z,1478893024.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:04.784Z,1478893024.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:05.193Z,1478893025.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:05.581Z,1478893025.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:05.644Z,1478893025.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:05.958Z,1478893025.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:06.000Z,1478893026.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:06.361Z,1478893026.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:06.796Z,1478893026.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:06.804Z,1478893026.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:07.163Z,1478893027.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:07.592Z,1478893027.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:07.674Z,1478893027.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:07.000Z,1478893028.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:08.005Z,1478893028.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:08.362Z,1478893028.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:08.796Z,1478893028.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:08.805Z,1478893028.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:09.183Z,1478893029.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:09.592Z,1478893029.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:09.628Z,1478893029.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:09.975Z,1478893029.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:09.000Z,1478893030.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:10.385Z,1478893030.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:10.789Z,1478893030.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:10.796Z,1478893030.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:11.157Z,1478893031.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:11.592Z,1478893031.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:11.604Z,1478893031.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:11.996Z,1478893031.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:12.092Z,1478893032.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:12.378Z,1478893032.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:12.764Z,1478893032.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:12.888Z,1478893032.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:13.183Z,1478893033.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:13.545Z,1478893033.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:13.684Z,1478893033.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:13.961Z,1478893033.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:14.375Z,1478893034.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:14.424Z,1478893034.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:14.792Z,1478893034.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:15.161Z,1478893035.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:15.220Z,1478893035.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:15.554Z,1478893035.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:15.961Z,1478893035.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:16.016Z,1478893036.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:16.359Z,1478893036.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:16.448Z,1478893036.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:16.754Z,1478893036.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:17.171Z,1478893037.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:17.244Z,1478893037.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:17.633Z,1478893037.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:17.948Z,1478893037.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:17.964Z,1478893037.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:18.355Z,1478893038.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:18.744Z,1478893038.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:18.768Z,1478893038.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:19.142Z,1478893039.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:19.541Z,1478893039.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:19.642Z,1478893039.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:19.964Z,1478893039.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:19.974Z,1478893039.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:20.346Z,1478893040.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:20.396Z,1478893040.396 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T19:37:20.396Z,1478893040.396 [Default:CheckIn:C.Wait] Stopped
2016-11-11T19:37:20.396Z,1478893040.396 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T19:37:20.396Z,1478893040.396 [Default:CheckIn:D] Running Loop=1
2016-11-11T19:37:20.776Z,1478893040.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:20.785Z,1478893040.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:20.827Z,1478893040.827 [Default:CheckIn:D] Stopped
2016-11-11T19:37:20.827Z,1478893040.827 [Default:CheckIn:E] Running Loop=1
2016-11-11T19:37:21.162Z,1478893041.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:21.214Z,1478893041.214 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 887.324870 min 
2016-11-11T19:37:21.214Z,1478893041.214 [Default:CheckIn:E] Stopped
2016-11-11T19:37:21.214Z,1478893041.214 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T19:37:21.214Z,1478893041.214 [Default:CheckIn] Stopped
2016-11-11T19:37:21.214Z,1478893041.214 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T19:37:21.215Z,1478893041.215 [Default:CheckIn](INFO): Running loop #86
2016-11-11T19:37:21.215Z,1478893041.215 [Default:CheckIn] Running Loop=86
2016-11-11T19:37:21.215Z,1478893041.215 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T19:37:21.215Z,1478893041.215 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T19:37:21.572Z,1478893041.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:21.612Z,1478893041.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:22.008Z,1478893042.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:22.804Z,1478893042.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:23.600Z,1478893043.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:24.012Z,1478893044.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:24.808Z,1478893044.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:25.090Z,1478893045.091 [NAL9602](INFO): Powering up
2016-11-11T19:37:25.205Z,1478893045.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:25.325Z,1478893045.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:25.610Z,1478893045.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:25.749Z,1478893045.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:26.044Z,1478893046.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:26.113Z,1478893046.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:26.542Z,1478893046.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:26.840Z,1478893046.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:26.922Z,1478893046.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:27.308Z,1478893047.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:27.638Z,1478893047.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:27.710Z,1478893047.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:28.105Z,1478893048.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:28.396Z,1478893048.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:28.512Z,1478893048.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:28.954Z,1478893048.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:29.194Z,1478893049.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:29.312Z,1478893049.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:29.719Z,1478893049.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:29.989Z,1478893049.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:30.092Z,1478893050.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:30.400Z,1478893050.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:30.497Z,1478893050.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:30.923Z,1478893050.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:31.196Z,1478893051.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:31.292Z,1478893051.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:31.705Z,1478893051.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:31.928Z,1478893051.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:32.096Z,1478893052.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:32.505Z,1478893052.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:32.726Z,1478893052.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:32.903Z,1478893052.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:33.313Z,1478893053.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:33.521Z,1478893053.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:33.723Z,1478893053.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:33.932Z,1478893053.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:34.101Z,1478893054.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:34.510Z,1478893054.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:34.728Z,1478893054.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:34.913Z,1478893054.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:35.310Z,1478893055.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:35.533Z,1478893055.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:35.719Z,1478893055.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:35.956Z,1478893055.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:36.061Z,1478893056.061 [NAL9602](INFO): NAL9602 initialized
2016-11-11T19:37:36.116Z,1478893056.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:36.510Z,1478893056.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:36.752Z,1478893056.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:36.861Z,1478893056.861 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T19:37:36.861Z,1478893056.861 [NAL9602] Data Fault, FailCount= 1
2016-11-11T19:37:36.861Z,1478893056.861 [NAL9602](ERROR): Data Fault
2016-11-11T19:37:36.925Z,1478893056.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:36.964Z,1478893056.964 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T19:37:37.268Z,1478893057.268 [NAL9602](INFO): Powering down
2016-11-11T19:37:37.325Z,1478893057.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:37.548Z,1478893057.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:37.729Z,1478893057.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:37.956Z,1478893057.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:38.105Z,1478893058.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:38.156Z,1478893058.157 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T19:37:38.157Z,1478893058.157 [NAL9602] No Fault, FailCount= 1
2016-11-11T19:37:38.499Z,1478893058.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:38.752Z,1478893058.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:38.938Z,1478893058.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:39.298Z,1478893059.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:39.548Z,1478893059.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:39.738Z,1478893059.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:40.016Z,1478893060.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:40.103Z,1478893060.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:40.538Z,1478893060.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:40.812Z,1478893060.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:40.938Z,1478893060.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:41.300Z,1478893061.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:41.608Z,1478893061.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:41.702Z,1478893061.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:42.113Z,1478893062.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:42.372Z,1478893062.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:42.461Z,1478893062.461 [NAL9602](INFO): Powering up NAL9602
2016-11-11T19:37:42.516Z,1478893062.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:42.914Z,1478893062.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:43.168Z,1478893063.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:43.309Z,1478893063.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:43.716Z,1478893063.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:43.965Z,1478893063.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:44.113Z,1478893064.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:44.508Z,1478893064.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:44.760Z,1478893064.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:44.908Z,1478893064.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:45.297Z,1478893065.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:45.556Z,1478893065.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:45.697Z,1478893065.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:46.097Z,1478893066.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:46.352Z,1478893066.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:46.516Z,1478893066.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:46.897Z,1478893066.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:47.148Z,1478893067.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:47.296Z,1478893067.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:47.698Z,1478893067.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:47.944Z,1478893067.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:48.102Z,1478893068.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:48.497Z,1478893068.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:48.740Z,1478893068.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:48.901Z,1478893068.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:49.310Z,1478893069.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:49.536Z,1478893069.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:49.705Z,1478893069.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:49.944Z,1478893069.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:50.116Z,1478893070.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:50.352Z,1478893070.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:50.506Z,1478893070.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:50.760Z,1478893070.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:50.917Z,1478893070.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:51.168Z,1478893071.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:51.309Z,1478893071.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:51.718Z,1478893071.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:51.896Z,1478893071.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:52.102Z,1478893072.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:52.508Z,1478893072.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:52.692Z,1478893072.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:52.929Z,1478893072.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:53.314Z,1478893073.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:53.488Z,1478893073.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:53.660Z,1478893073.661 [NAL9602](INFO): NAL9602 initialized
2016-11-11T19:37:53.692Z,1478893073.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:53.996Z,1478893073.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:54.137Z,1478893074.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:54.523Z,1478893074.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:54.792Z,1478893074.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:54.938Z,1478893074.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:55.307Z,1478893075.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:55.588Z,1478893075.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:55.734Z,1478893075.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:56.105Z,1478893076.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:56.352Z,1478893076.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:56.507Z,1478893076.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:56.907Z,1478893076.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:57.148Z,1478893077.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:57.312Z,1478893077.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:57.701Z,1478893077.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:57.945Z,1478893077.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:58.100Z,1478893078.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:58.356Z,1478893078.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:58.509Z,1478893078.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:58.909Z,1478893078.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:59.152Z,1478893079.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:37:59.301Z,1478893079.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:59.710Z,1478893079.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:37:59.880Z,1478893079.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:00.107Z,1478893080.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:00.502Z,1478893080.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:00.676Z,1478893080.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:00.901Z,1478893080.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:01.321Z,1478893081.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:01.473Z,1478893081.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:01.711Z,1478893081.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:01.884Z,1478893081.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:02.125Z,1478893082.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:02.517Z,1478893082.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:02.680Z,1478893082.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:02.918Z,1478893082.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:03.305Z,1478893083.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:03.488Z,1478893083.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:03.710Z,1478893083.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:03.908Z,1478893083.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:04.117Z,1478893084.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:04.516Z,1478893084.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:04.705Z,1478893084.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:04.893Z,1478893084.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:05.297Z,1478893085.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:05.500Z,1478893085.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:05.702Z,1478893085.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:05.912Z,1478893085.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:06.109Z,1478893086.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:06.541Z,1478893086.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:06.708Z,1478893086.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:06.913Z,1478893086.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:07.320Z,1478893087.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:07.504Z,1478893087.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:07.777Z,1478893087.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:07.980Z,1478893087.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:08.117Z,1478893088.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:08.529Z,1478893088.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:08.776Z,1478893088.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:08.892Z,1478893088.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:09.337Z,1478893089.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:09.572Z,1478893089.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:09.735Z,1478893089.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:10.101Z,1478893090.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:10.332Z,1478893090.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:10.505Z,1478893090.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:10.900Z,1478893090.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:11.128Z,1478893091.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:11.302Z,1478893091.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:11.711Z,1478893091.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:11.925Z,1478893091.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:12.111Z,1478893092.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:12.340Z,1478893092.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:12.518Z,1478893092.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:12.914Z,1478893092.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:13.136Z,1478893093.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:13.309Z,1478893093.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:13.708Z,1478893093.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:13.860Z,1478893093.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:14.106Z,1478893094.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:14.513Z,1478893094.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:14.656Z,1478893094.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:14.912Z,1478893094.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:15.313Z,1478893095.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:15.453Z,1478893095.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:15.717Z,1478893095.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:15.864Z,1478893095.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:16.097Z,1478893096.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:16.505Z,1478893096.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:16.660Z,1478893096.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:16.913Z,1478893096.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:17.310Z,1478893097.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:17.457Z,1478893097.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:17.716Z,1478893097.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:17.868Z,1478893097.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:18.114Z,1478893098.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:18.502Z,1478893098.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:18.664Z,1478893098.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:18.910Z,1478893098.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:19.308Z,1478893099.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:19.461Z,1478893099.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:19.713Z,1478893099.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:19.872Z,1478893099.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:20.113Z,1478893100.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:20.529Z,1478893100.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:20.668Z,1478893100.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:20.921Z,1478893100.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:21.296Z,1478893101.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:21.464Z,1478893101.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:21.737Z,1478893101.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:21.960Z,1478893101.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:22.756Z,1478893102.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:23.552Z,1478893103.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:24.308Z,1478893104.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:25.104Z,1478893105.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:25.209Z,1478893105.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:25.367Z,1478893105.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:25.717Z,1478893105.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:25.901Z,1478893105.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:26.151Z,1478893106.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:26.332Z,1478893106.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:26.506Z,1478893106.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:26.918Z,1478893106.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:27.128Z,1478893107.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:27.326Z,1478893107.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:27.708Z,1478893107.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:27.836Z,1478893107.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:28.113Z,1478893108.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:28.517Z,1478893108.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:28.632Z,1478893108.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:28.892Z,1478893108.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:29.297Z,1478893109.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:29.429Z,1478893109.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:29.700Z,1478893109.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:29.840Z,1478893109.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:30.111Z,1478893110.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:30.506Z,1478893110.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:30.636Z,1478893110.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:30.913Z,1478893110.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:31.313Z,1478893111.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:31.433Z,1478893111.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:31.710Z,1478893111.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:31.844Z,1478893111.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:32.111Z,1478893112.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:32.502Z,1478893112.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:32.640Z,1478893112.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:32.901Z,1478893112.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:33.308Z,1478893113.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:33.437Z,1478893113.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:33.713Z,1478893113.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:33.852Z,1478893113.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:34.112Z,1478893114.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:34.512Z,1478893114.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:34.648Z,1478893114.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:34.912Z,1478893114.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:35.321Z,1478893115.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:35.444Z,1478893115.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:35.715Z,1478893115.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:35.940Z,1478893115.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:36.123Z,1478893116.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:36.518Z,1478893116.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:36.736Z,1478893116.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:36.897Z,1478893116.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:37.296Z,1478893117.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:37.532Z,1478893117.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:37.697Z,1478893117.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:38.133Z,1478893118.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:38.276Z,1478893118.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:38.493Z,1478893118.493 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T19:38:38.493Z,1478893118.493 [BPC1] Data Fault, FailCount= 1
2016-11-11T19:38:38.494Z,1478893118.494 [BPC1](ERROR): Data Fault
2016-11-11T19:38:38.502Z,1478893118.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:38.523Z,1478893118.523 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T19:38:38.908Z,1478893118.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:39.072Z,1478893119.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:39.309Z,1478893119.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:39.712Z,1478893119.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:39.732Z,1478893119.732 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:38:39.732Z,1478893119.732 [BPC1] No Fault, FailCount= 1
2016-11-11T19:38:39.869Z,1478893119.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:40.150Z,1478893120.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:40.280Z,1478893120.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:40.544Z,1478893120.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:40.912Z,1478893120.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:41.078Z,1478893121.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:41.321Z,1478893121.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:41.720Z,1478893121.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:41.816Z,1478893121.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:42.097Z,1478893122.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:42.497Z,1478893122.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:42.614Z,1478893122.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:42.901Z,1478893122.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:43.303Z,1478893123.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:43.409Z,1478893123.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:43.712Z,1478893123.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:43.821Z,1478893123.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:44.113Z,1478893124.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:44.508Z,1478893124.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:44.616Z,1478893124.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:44.920Z,1478893124.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:45.313Z,1478893125.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:45.414Z,1478893125.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:45.726Z,1478893125.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:45.828Z,1478893125.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:46.110Z,1478893126.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:46.507Z,1478893126.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:46.626Z,1478893126.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:46.913Z,1478893126.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:47.305Z,1478893127.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:47.421Z,1478893127.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:47.709Z,1478893127.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:47.832Z,1478893127.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:48.117Z,1478893128.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:48.497Z,1478893128.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:48.628Z,1478893128.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:48.901Z,1478893128.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:49.298Z,1478893129.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:49.424Z,1478893129.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:49.709Z,1478893129.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:49.912Z,1478893129.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:50.104Z,1478893130.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:50.501Z,1478893130.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:50.708Z,1478893130.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:50.917Z,1478893130.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:51.345Z,1478893131.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:51.504Z,1478893131.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:51.729Z,1478893131.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:52.134Z,1478893132.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:52.260Z,1478893132.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:52.533Z,1478893132.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:52.904Z,1478893132.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:53.056Z,1478893133.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:53.303Z,1478893133.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:53.735Z,1478893133.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:53.853Z,1478893133.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:54.097Z,1478893134.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:54.264Z,1478893134.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:54.537Z,1478893134.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:54.930Z,1478893134.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:55.060Z,1478893135.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:55.310Z,1478893135.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:55.697Z,1478893135.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:55.796Z,1478893135.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:56.121Z,1478893136.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:56.524Z,1478893136.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:56.592Z,1478893136.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:56.921Z,1478893136.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:57.310Z,1478893137.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:57.389Z,1478893137.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:57.722Z,1478893137.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:57.800Z,1478893137.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:58.130Z,1478893138.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:58.501Z,1478893138.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:58.596Z,1478893138.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:58.905Z,1478893138.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:59.299Z,1478893139.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:59.393Z,1478893139.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:38:59.713Z,1478893139.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:38:59.804Z,1478893139.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:00.113Z,1478893140.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:00.512Z,1478893140.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:00.600Z,1478893140.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:00.913Z,1478893140.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:01.320Z,1478893141.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:01.397Z,1478893141.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:01.731Z,1478893141.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:01.808Z,1478893141.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:02.120Z,1478893142.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:02.514Z,1478893142.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:02.604Z,1478893142.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:02.905Z,1478893142.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:03.318Z,1478893143.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:03.401Z,1478893143.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:03.720Z,1478893143.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:03.884Z,1478893143.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:04.120Z,1478893144.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:04.502Z,1478893144.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:04.680Z,1478893144.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:04.902Z,1478893144.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:05.306Z,1478893145.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:05.476Z,1478893145.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:05.734Z,1478893145.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:06.112Z,1478893146.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:06.236Z,1478893146.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:06.521Z,1478893146.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:06.942Z,1478893146.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:07.032Z,1478893147.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:07.325Z,1478893147.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:07.829Z,1478893147.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:07.872Z,1478893147.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:08.116Z,1478893148.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:08.268Z,1478893148.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:08.525Z,1478893148.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:08.925Z,1478893148.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:09.064Z,1478893149.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:09.297Z,1478893149.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:09.708Z,1478893149.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:09.776Z,1478893149.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:10.117Z,1478893150.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:10.513Z,1478893150.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:10.572Z,1478893150.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:10.917Z,1478893150.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:11.297Z,1478893151.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:11.369Z,1478893151.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:11.716Z,1478893151.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:11.804Z,1478893151.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:12.114Z,1478893152.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:12.534Z,1478893152.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:12.600Z,1478893152.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:12.915Z,1478893152.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:13.301Z,1478893153.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:13.397Z,1478893153.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:13.713Z,1478893153.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:13.808Z,1478893153.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:14.138Z,1478893154.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:14.504Z,1478893154.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:14.604Z,1478893154.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:14.916Z,1478893154.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:15.312Z,1478893155.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:15.400Z,1478893155.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:15.699Z,1478893155.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:15.808Z,1478893155.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:16.104Z,1478893156.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:16.523Z,1478893156.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:16.604Z,1478893156.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:16.910Z,1478893156.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:17.310Z,1478893157.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:17.400Z,1478893157.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:17.709Z,1478893157.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:17.864Z,1478893157.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:18.105Z,1478893158.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:18.512Z,1478893158.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:18.660Z,1478893158.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:18.913Z,1478893158.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:19.317Z,1478893159.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:19.456Z,1478893159.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:19.693Z,1478893159.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:20.105Z,1478893160.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:20.216Z,1478893160.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:20.505Z,1478893160.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:20.918Z,1478893160.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:21.012Z,1478893161.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:21.309Z,1478893161.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:21.741Z,1478893161.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:21.808Z,1478893161.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:22.114Z,1478893162.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:22.236Z,1478893162.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:23.032Z,1478893163.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:23.752Z,1478893163.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:24.548Z,1478893164.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:25.347Z,1478893165.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:25.767Z,1478893165.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:25.865Z,1478893165.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:26.006Z,1478893166.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:26.377Z,1478893166.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:26.564Z,1478893166.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:26.742Z,1478893166.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:27.142Z,1478893167.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:27.373Z,1478893167.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:27.547Z,1478893167.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:27.784Z,1478893167.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:27.942Z,1478893167.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:28.341Z,1478893168.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:28.580Z,1478893168.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:28.741Z,1478893168.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:29.142Z,1478893169.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:29.376Z,1478893169.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:29.541Z,1478893169.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:29.784Z,1478893169.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:29.941Z,1478893169.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:30.342Z,1478893170.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:30.580Z,1478893170.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:30.739Z,1478893170.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:31.141Z,1478893171.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:31.376Z,1478893171.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:31.553Z,1478893171.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:31.844Z,1478893171.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:31.949Z,1478893171.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:32.350Z,1478893172.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:32.640Z,1478893172.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:32.749Z,1478893172.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:33.142Z,1478893173.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:33.436Z,1478893173.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:33.552Z,1478893173.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:33.957Z,1478893173.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:34.196Z,1478893174.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:34.352Z,1478893174.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:34.760Z,1478893174.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:34.992Z,1478893174.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:35.157Z,1478893175.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:35.557Z,1478893175.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:35.796Z,1478893175.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:35.937Z,1478893175.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:36.220Z,1478893176.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:36.341Z,1478893176.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:36.742Z,1478893176.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:37.016Z,1478893177.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:37.140Z,1478893177.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:37.544Z,1478893177.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:37.724Z,1478893177.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:37.944Z,1478893177.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:38.394Z,1478893178.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:38.520Z,1478893178.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:38.749Z,1478893178.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:39.188Z,1478893179.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:39.332Z,1478893179.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:39.553Z,1478893179.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:39.752Z,1478893179.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:39.982Z,1478893179.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:40.388Z,1478893180.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:40.548Z,1478893180.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:40.757Z,1478893180.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:41.142Z,1478893181.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:41.344Z,1478893181.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:41.553Z,1478893181.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:41.752Z,1478893181.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:41.946Z,1478893181.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:42.349Z,1478893182.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:42.548Z,1478893182.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:42.754Z,1478893182.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:43.154Z,1478893183.154 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:43.154Z,1478893183.154 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 276
2016-11-11T19:39:43.154Z,1478893183.154 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:39:43.161Z,1478893183.161 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:43.161Z,1478893183.161 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 276
2016-11-11T19:39:43.161Z,1478893183.161 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:39:43.163Z,1478893183.163 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:43.163Z,1478893183.163 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 276
2016-11-11T19:39:43.163Z,1478893183.163 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:39:43.203Z,1478893183.203 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:39:43.204Z,1478893183.204 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:39:43.204Z,1478893183.204 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:39:43.345Z,1478893183.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:43.578Z,1478893183.578 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:39:43.578Z,1478893183.578 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 276
2016-11-11T19:39:43.583Z,1478893183.583 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:39:43.583Z,1478893183.583 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 276
2016-11-11T19:39:43.584Z,1478893183.584 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:39:43.584Z,1478893183.584 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 276
2016-11-11T19:39:43.756Z,1478893183.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:43.938Z,1478893183.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:39:43.939Z,1478893183.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:39:43.939Z,1478893183.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:39:43.944Z,1478893183.944 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:39:43.945Z,1478893183.945 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:39:43.945Z,1478893183.945 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:39:43.946Z,1478893183.946 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:39:43.946Z,1478893183.946 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:39:43.947Z,1478893183.947 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:39:44.345Z,1478893184.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:44.554Z,1478893184.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:44.744Z,1478893184.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:45.142Z,1478893185.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:45.349Z,1478893185.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:45.549Z,1478893185.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:45.840Z,1478893185.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:45.942Z,1478893185.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:46.343Z,1478893186.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:46.636Z,1478893186.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:46.740Z,1478893186.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:47.152Z,1478893187.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:47.432Z,1478893187.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:47.541Z,1478893187.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:47.950Z,1478893187.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:48.180Z,1478893188.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:48.352Z,1478893188.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:48.745Z,1478893188.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:48.976Z,1478893188.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:49.147Z,1478893189.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:49.549Z,1478893189.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:49.774Z,1478893189.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:49.950Z,1478893189.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:50.184Z,1478893190.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:50.349Z,1478893190.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:50.742Z,1478893190.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:50.980Z,1478893190.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:51.154Z,1478893191.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:51.592Z,1478893191.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:51.700Z,1478893191.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:51.973Z,1478893191.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:52.373Z,1478893192.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:52.496Z,1478893192.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:52.752Z,1478893192.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:53.165Z,1478893193.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:53.293Z,1478893193.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:53.550Z,1478893193.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:53.704Z,1478893193.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:53.974Z,1478893193.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:54.369Z,1478893194.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:54.500Z,1478893194.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:54.757Z,1478893194.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:55.137Z,1478893195.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:55.297Z,1478893195.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:55.560Z,1478893195.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:55.708Z,1478893195.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:55.965Z,1478893195.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:56.337Z,1478893196.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:56.504Z,1478893196.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:56.761Z,1478893196.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:57.141Z,1478893197.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:57.301Z,1478893197.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:57.549Z,1478893197.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:57.716Z,1478893197.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:57.941Z,1478893197.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:58.342Z,1478893198.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:58.515Z,1478893198.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:58.740Z,1478893198.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:59.144Z,1478893199.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:59.312Z,1478893199.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:59.553Z,1478893199.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:39:59.804Z,1478893199.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:39:59.965Z,1478893199.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:00.351Z,1478893200.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:00.600Z,1478893200.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:00.752Z,1478893200.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:01.151Z,1478893201.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:01.396Z,1478893201.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:01.557Z,1478893201.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:01.933Z,1478893201.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:02.156Z,1478893202.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:02.337Z,1478893202.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:02.737Z,1478893202.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:02.954Z,1478893202.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:03.141Z,1478893203.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:03.540Z,1478893203.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:03.767Z,1478893203.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:03.941Z,1478893203.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:04.188Z,1478893204.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:04.351Z,1478893204.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:04.755Z,1478893204.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:04.984Z,1478893204.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:05.161Z,1478893205.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:05.552Z,1478893205.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:05.676Z,1478893205.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:05.985Z,1478893205.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:06.373Z,1478893206.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:06.472Z,1478893206.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:06.753Z,1478893206.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:07.162Z,1478893207.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:07.269Z,1478893207.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:07.545Z,1478893207.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:07.680Z,1478893207.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:07.974Z,1478893207.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:08.359Z,1478893208.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:08.476Z,1478893208.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:08.752Z,1478893208.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:09.157Z,1478893209.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:09.277Z,1478893209.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:09.558Z,1478893209.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:09.696Z,1478893209.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:09.967Z,1478893209.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:10.355Z,1478893210.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:10.492Z,1478893210.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:10.735Z,1478893210.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:11.141Z,1478893211.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:11.289Z,1478893211.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:11.539Z,1478893211.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:11.700Z,1478893211.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:11.940Z,1478893211.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:12.350Z,1478893212.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:12.496Z,1478893212.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:12.749Z,1478893212.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:13.141Z,1478893213.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:13.292Z,1478893213.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:13.543Z,1478893213.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:13.788Z,1478893213.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:13.940Z,1478893213.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:14.357Z,1478893214.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:14.584Z,1478893214.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:14.754Z,1478893214.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:15.154Z,1478893215.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:15.380Z,1478893215.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:15.559Z,1478893215.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:15.949Z,1478893215.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:16.132Z,1478893216.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:16.349Z,1478893216.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:16.745Z,1478893216.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:16.930Z,1478893216.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:17.162Z,1478893217.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:17.549Z,1478893217.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:17.725Z,1478893217.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:17.957Z,1478893217.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:18.138Z,1478893218.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:18.357Z,1478893218.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:18.735Z,1478893218.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:18.952Z,1478893218.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:19.145Z,1478893219.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:19.549Z,1478893219.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:19.656Z,1478893219.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:19.961Z,1478893219.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:20.424Z,1478893220.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:20.452Z,1478893220.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:20.762Z,1478893220.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:21.161Z,1478893221.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:21.249Z,1478893221.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:21.562Z,1478893221.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:21.660Z,1478893221.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:21.969Z,1478893221.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:22.373Z,1478893222.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:22.456Z,1478893222.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:23.254Z,1478893223.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:23.668Z,1478893223.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:24.465Z,1478893224.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:25.261Z,1478893225.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:25.672Z,1478893225.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:25.795Z,1478893225.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:25.954Z,1478893225.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:26.320Z,1478893226.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:26.468Z,1478893226.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:26.721Z,1478893226.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:27.093Z,1478893227.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:27.264Z,1478893227.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:27.517Z,1478893227.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:27.772Z,1478893227.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:27.901Z,1478893227.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:28.294Z,1478893228.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:28.568Z,1478893228.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:28.694Z,1478893228.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:29.117Z,1478893229.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:29.364Z,1478893229.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:29.505Z,1478893229.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:29.905Z,1478893229.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:30.108Z,1478893230.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:30.301Z,1478893230.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:30.699Z,1478893230.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:30.904Z,1478893230.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:31.105Z,1478893231.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:31.513Z,1478893231.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:31.701Z,1478893231.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:31.907Z,1478893231.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:32.112Z,1478893232.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:32.301Z,1478893232.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:32.705Z,1478893232.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:32.908Z,1478893232.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:33.094Z,1478893233.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:33.505Z,1478893233.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:33.640Z,1478893233.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:33.896Z,1478893233.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:34.353Z,1478893234.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:34.437Z,1478893234.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:34.725Z,1478893234.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:35.106Z,1478893235.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:35.233Z,1478893235.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:35.521Z,1478893235.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:35.644Z,1478893235.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:35.917Z,1478893235.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:36.326Z,1478893236.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:36.440Z,1478893236.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:36.733Z,1478893236.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:37.116Z,1478893237.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:37.237Z,1478893237.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:37.497Z,1478893237.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:37.654Z,1478893237.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:37.889Z,1478893237.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:38.297Z,1478893238.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:38.448Z,1478893238.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:38.693Z,1478893238.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:39.100Z,1478893239.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:39.245Z,1478893239.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:39.500Z,1478893239.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:39.656Z,1478893239.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:39.904Z,1478893239.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:40.294Z,1478893240.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:40.452Z,1478893240.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:40.701Z,1478893240.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:41.107Z,1478893241.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:41.248Z,1478893241.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:41.502Z,1478893241.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:41.748Z,1478893241.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:41.917Z,1478893241.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:42.307Z,1478893242.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:42.544Z,1478893242.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:42.700Z,1478893242.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:43.103Z,1478893243.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:43.340Z,1478893243.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:43.502Z,1478893243.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:43.914Z,1478893243.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:44.088Z,1478893244.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:44.316Z,1478893244.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:44.691Z,1478893244.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:44.884Z,1478893244.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:45.129Z,1478893245.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:45.496Z,1478893245.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:45.681Z,1478893245.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:45.897Z,1478893245.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:46.092Z,1478893246.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:46.309Z,1478893246.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:46.702Z,1478893246.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:46.888Z,1478893246.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:47.108Z,1478893247.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:47.513Z,1478893247.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:47.624Z,1478893247.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:47.897Z,1478893247.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:48.297Z,1478893248.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:48.420Z,1478893248.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:48.753Z,1478893248.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:49.101Z,1478893249.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:49.217Z,1478893249.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:49.521Z,1478893249.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:49.628Z,1478893249.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:49.897Z,1478893249.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:50.325Z,1478893250.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:50.424Z,1478893250.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:50.727Z,1478893250.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:51.101Z,1478893251.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:51.221Z,1478893251.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:51.509Z,1478893251.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:51.644Z,1478893251.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:51.913Z,1478893251.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:52.313Z,1478893252.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:52.442Z,1478893252.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:52.702Z,1478893252.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:53.104Z,1478893253.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:53.236Z,1478893253.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:53.500Z,1478893253.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:53.644Z,1478893253.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:53.901Z,1478893253.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:54.292Z,1478893254.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:54.440Z,1478893254.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:54.702Z,1478893254.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:55.097Z,1478893255.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:55.236Z,1478893255.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:55.502Z,1478893255.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:55.712Z,1478893255.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:55.905Z,1478893255.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:56.300Z,1478893256.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:56.508Z,1478893256.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:56.707Z,1478893256.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:57.109Z,1478893257.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:57.304Z,1478893257.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:57.511Z,1478893257.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:57.915Z,1478893257.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:58.068Z,1478893258.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:58.304Z,1478893258.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:58.703Z,1478893258.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:58.864Z,1478893258.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:59.106Z,1478893259.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:59.504Z,1478893259.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:40:59.661Z,1478893259.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:40:59.903Z,1478893259.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:00.072Z,1478893260.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:00.297Z,1478893260.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:00.709Z,1478893260.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:00.868Z,1478893260.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:01.113Z,1478893261.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:01.511Z,1478893261.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:01.600Z,1478893261.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:01.910Z,1478893261.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:02.307Z,1478893262.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:02.396Z,1478893262.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:02.744Z,1478893262.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:03.111Z,1478893263.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:03.194Z,1478893263.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:03.539Z,1478893263.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:03.608Z,1478893263.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:03.906Z,1478893263.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:04.317Z,1478893264.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:04.404Z,1478893264.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:04.739Z,1478893264.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:05.105Z,1478893265.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:05.201Z,1478893265.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:05.506Z,1478893265.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:05.612Z,1478893265.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:05.907Z,1478893265.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:06.289Z,1478893266.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:06.408Z,1478893266.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:06.702Z,1478893266.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:07.087Z,1478893267.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:07.205Z,1478893267.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:07.502Z,1478893267.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:07.616Z,1478893267.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:07.900Z,1478893267.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:08.309Z,1478893268.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:08.412Z,1478893268.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:08.693Z,1478893268.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:09.109Z,1478893269.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:09.208Z,1478893269.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:09.512Z,1478893269.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:09.688Z,1478893269.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:09.889Z,1478893269.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:10.293Z,1478893270.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:10.484Z,1478893270.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:10.689Z,1478893270.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:11.097Z,1478893271.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:11.280Z,1478893271.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:11.492Z,1478893271.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:11.905Z,1478893271.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:12.044Z,1478893272.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:12.304Z,1478893272.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:12.697Z,1478893272.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:12.840Z,1478893272.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:13.097Z,1478893273.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:13.497Z,1478893273.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:13.637Z,1478893273.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:13.905Z,1478893273.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:14.052Z,1478893274.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:14.306Z,1478893274.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:14.688Z,1478893274.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:14.848Z,1478893274.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:15.092Z,1478893275.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:15.505Z,1478893275.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:15.589Z,1478893275.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:15.902Z,1478893275.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:16.316Z,1478893276.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:16.384Z,1478893276.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:16.769Z,1478893276.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:17.097Z,1478893277.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:17.181Z,1478893277.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:17.501Z,1478893277.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:17.596Z,1478893277.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:17.921Z,1478893277.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:18.292Z,1478893278.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:18.392Z,1478893278.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:18.729Z,1478893278.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:19.139Z,1478893279.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:19.189Z,1478893279.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:19.505Z,1478893279.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:19.600Z,1478893279.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:19.904Z,1478893279.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:20.303Z,1478893280.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:20.396Z,1478893280.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:20.705Z,1478893280.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:21.104Z,1478893281.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:21.193Z,1478893281.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:21.501Z,1478893281.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:21.604Z,1478893281.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:21.891Z,1478893281.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:22.292Z,1478893282.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:22.400Z,1478893282.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:22.701Z,1478893282.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:23.196Z,1478893283.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:23.676Z,1478893283.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:24.472Z,1478893284.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:25.269Z,1478893285.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:26.024Z,1478893286.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:26.142Z,1478893286.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:26.289Z,1478893286.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:26.625Z,1478893286.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:26.820Z,1478893286.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:27.025Z,1478893287.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:27.423Z,1478893287.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:27.617Z,1478893287.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:27.821Z,1478893287.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:28.048Z,1478893288.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:28.221Z,1478893288.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:28.621Z,1478893288.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:28.846Z,1478893288.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:29.029Z,1478893289.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:29.434Z,1478893289.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:29.556Z,1478893289.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:29.817Z,1478893289.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:30.229Z,1478893290.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:30.355Z,1478893290.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:30.626Z,1478893290.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:31.066Z,1478893291.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:31.153Z,1478893291.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:31.424Z,1478893291.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:31.564Z,1478893291.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:31.823Z,1478893291.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:32.251Z,1478893292.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:32.360Z,1478893292.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:32.625Z,1478893292.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:33.069Z,1478893293.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:33.157Z,1478893293.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:33.453Z,1478893293.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:33.568Z,1478893293.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:33.825Z,1478893293.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:34.229Z,1478893294.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:34.364Z,1478893294.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:34.617Z,1478893294.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:35.022Z,1478893295.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:35.161Z,1478893295.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:35.433Z,1478893295.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:35.572Z,1478893295.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:35.825Z,1478893295.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:36.217Z,1478893296.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:36.368Z,1478893296.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:36.621Z,1478893296.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:37.030Z,1478893297.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:37.164Z,1478893297.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:37.421Z,1478893297.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:37.668Z,1478893297.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:37.841Z,1478893297.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:38.235Z,1478893298.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:38.464Z,1478893298.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:38.637Z,1478893298.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:39.021Z,1478893299.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:39.260Z,1478893299.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:39.417Z,1478893299.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:39.816Z,1478893299.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:40.004Z,1478893300.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:40.221Z,1478893300.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:40.628Z,1478893300.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:40.800Z,1478893300.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:41.026Z,1478893301.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:41.418Z,1478893301.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:41.599Z,1478893301.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:41.835Z,1478893301.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:42.016Z,1478893302.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:42.237Z,1478893302.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:42.630Z,1478893302.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:42.813Z,1478893302.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:43.029Z,1478893303.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:43.415Z,1478893303.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:43.532Z,1478893303.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:43.823Z,1478893303.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:44.226Z,1478893304.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:44.328Z,1478893304.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:44.619Z,1478893304.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:45.033Z,1478893305.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:45.125Z,1478893305.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:45.477Z,1478893305.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:45.536Z,1478893305.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:45.813Z,1478893305.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:46.288Z,1478893306.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:46.332Z,1478893306.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:46.622Z,1478893306.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:47.053Z,1478893307.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:47.129Z,1478893307.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:47.453Z,1478893307.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:47.552Z,1478893307.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:47.849Z,1478893307.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:48.229Z,1478893308.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:48.349Z,1478893308.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:48.636Z,1478893308.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:49.032Z,1478893309.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:49.145Z,1478893309.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:49.430Z,1478893309.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:49.556Z,1478893309.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:49.837Z,1478893309.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:50.222Z,1478893310.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:50.356Z,1478893310.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:50.639Z,1478893310.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:51.053Z,1478893311.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:51.152Z,1478893311.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:51.450Z,1478893311.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:51.620Z,1478893311.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:51.827Z,1478893311.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:52.233Z,1478893312.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:52.416Z,1478893312.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:52.626Z,1478893312.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:53.038Z,1478893313.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:53.212Z,1478893313.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:53.441Z,1478893313.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:53.831Z,1478893313.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:54.004Z,1478893314.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:54.243Z,1478893314.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:54.608Z,1478893314.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:54.800Z,1478893314.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:55.038Z,1478893315.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:55.433Z,1478893315.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:55.597Z,1478893315.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:55.818Z,1478893315.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:56.012Z,1478893316.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:56.222Z,1478893316.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:56.660Z,1478893316.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:56.808Z,1478893316.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:57.037Z,1478893317.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:57.421Z,1478893317.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:57.512Z,1478893317.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:57.825Z,1478893317.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:58.248Z,1478893318.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:58.308Z,1478893318.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:58.654Z,1478893318.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:59.031Z,1478893319.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:59.105Z,1478893319.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:59.443Z,1478893319.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:41:59.520Z,1478893319.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:41:59.881Z,1478893319.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:00.228Z,1478893320.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:00.316Z,1478893320.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:00.654Z,1478893320.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:01.025Z,1478893321.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:01.112Z,1478893321.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:01.453Z,1478893321.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:01.851Z,1478893321.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:01.908Z,1478893321.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:02.213Z,1478893322.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:02.617Z,1478893322.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:02.704Z,1478893322.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:03.018Z,1478893323.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:03.427Z,1478893323.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:03.500Z,1478893323.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:03.823Z,1478893323.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:04.212Z,1478893324.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:04.296Z,1478893324.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:04.617Z,1478893324.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:05.017Z,1478893325.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:05.092Z,1478893325.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:05.412Z,1478893325.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:05.817Z,1478893325.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:05.888Z,1478893325.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:06.217Z,1478893326.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:06.608Z,1478893326.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:06.684Z,1478893326.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:07.017Z,1478893327.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:07.409Z,1478893327.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:07.480Z,1478893327.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:07.826Z,1478893327.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:08.236Z,1478893328.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:08.276Z,1478893328.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:08.617Z,1478893328.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:09.017Z,1478893329.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:09.072Z,1478893329.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:09.413Z,1478893329.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:09.817Z,1478893329.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:09.868Z,1478893329.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:10.213Z,1478893330.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:10.617Z,1478893330.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:10.664Z,1478893330.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:11.021Z,1478893331.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:11.413Z,1478893331.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:11.460Z,1478893331.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:11.820Z,1478893331.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:12.227Z,1478893332.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:12.256Z,1478893332.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:12.707Z,1478893332.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:13.017Z,1478893333.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:13.052Z,1478893333.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:13.412Z,1478893333.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:13.846Z,1478893333.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:13.848Z,1478893333.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:14.209Z,1478893334.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:14.609Z,1478893334.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:14.644Z,1478893334.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:15.039Z,1478893335.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:15.413Z,1478893335.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:15.440Z,1478893335.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:15.845Z,1478893335.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:16.236Z,1478893336.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:16.242Z,1478893336.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:16.628Z,1478893336.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:17.024Z,1478893337.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:17.032Z,1478893337.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:17.413Z,1478893337.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:17.828Z,1478893337.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:17.932Z,1478893337.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:18.225Z,1478893338.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:18.612Z,1478893338.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:18.624Z,1478893338.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:19.013Z,1478893339.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:19.412Z,1478893339.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:19.420Z,1478893339.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:19.812Z,1478893339.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:20.216Z,1478893340.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:20.219Z,1478893340.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:20.613Z,1478893340.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:21.012Z,1478893341.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:21.027Z,1478893341.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:21.423Z,1478893341.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:21.432Z,1478893341.432 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T19:37:21.2Z
2016-11-11T19:42:21.433Z,1478893341.432 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T19:42:21.433Z,1478893341.433 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T19:42:21.808Z,1478893341.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:21.813Z,1478893341.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:22.604Z,1478893342.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:23.400Z,1478893343.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:24.196Z,1478893344.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:24.604Z,1478893344.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:25.012Z,1478893345.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:25.420Z,1478893345.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:25.828Z,1478893345.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:26.236Z,1478893346.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:26.644Z,1478893346.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:26.890Z,1478893346.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:27.052Z,1478893347.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:27.132Z,1478893347.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:27.465Z,1478893347.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:27.876Z,1478893347.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:28.285Z,1478893348.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:28.696Z,1478893348.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:29.104Z,1478893349.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:29.512Z,1478893349.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:29.920Z,1478893349.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:30.328Z,1478893350.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:31.124Z,1478893351.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:31.532Z,1478893351.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:32.328Z,1478893352.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:33.125Z,1478893353.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:33.576Z,1478893353.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:34.372Z,1478893354.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:35.168Z,1478893355.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:35.908Z,1478893355.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:36.704Z,1478893356.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:36.990Z,1478893356.990 [BPC1](ERROR): Failed to receive battery data
2016-11-11T19:42:36.991Z,1478893356.991 [BPC1] Communications Fault, FailCount= 1
2016-11-11T19:42:36.991Z,1478893356.991 [BPC1](ERROR): Communications Fault
2016-11-11T19:42:37.038Z,1478893357.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:37.091Z,1478893357.091 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T19:42:37.119Z,1478893357.119 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0344.lzma
2016-11-11T19:42:37.192Z,1478893357.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:37.516Z,1478893357.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:37.624Z,1478893357.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:37.906Z,1478893357.906 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0344.lzma.bak
2016-11-11T19:42:37.906Z,1478893357.906 [DataOverHttps](INFO): SBD MOMSN=4555702
2016-11-11T19:42:37.932Z,1478893357.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:37.989Z,1478893357.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:38.051Z,1478893358.051 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:42:38.052Z,1478893358.052 [BPC1] No Fault, FailCount= 1
2016-11-11T19:42:38.728Z,1478893358.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:39.448Z,1478893359.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:40.245Z,1478893360.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:40.551Z,1478893360.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:40.729Z,1478893360.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:41.041Z,1478893361.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:41.476Z,1478893361.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:42.272Z,1478893362.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:43.068Z,1478893363.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:43.476Z,1478893363.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:44.272Z,1478893364.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:45.068Z,1478893365.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:45.476Z,1478893365.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:46.272Z,1478893366.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:47.068Z,1478893367.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:47.536Z,1478893367.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:47.605Z,1478893367.605 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:47.605Z,1478893367.605 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 277
2016-11-11T19:42:47.605Z,1478893367.605 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:42:47.656Z,1478893367.657 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:47.657Z,1478893367.657 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 277
2016-11-11T19:42:47.657Z,1478893367.657 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:42:47.659Z,1478893367.659 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:47.673Z,1478893367.673 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 277
2016-11-11T19:42:47.673Z,1478893367.673 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:42:47.730Z,1478893367.730 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:42:47.730Z,1478893367.730 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:42:47.730Z,1478893367.730 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:42:47.896Z,1478893367.895 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:42:47.896Z,1478893367.896 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 277
2016-11-11T19:42:47.896Z,1478893367.896 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:42:47.896Z,1478893367.896 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 277
2016-11-11T19:42:47.897Z,1478893367.897 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:42:47.897Z,1478893367.897 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 277
2016-11-11T19:42:48.213Z,1478893368.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:42:48.213Z,1478893368.214 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:42:48.214Z,1478893368.214 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:42:48.229Z,1478893368.229 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:42:48.230Z,1478893368.230 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:42:48.231Z,1478893368.231 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:42:48.251Z,1478893368.251 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:42:48.252Z,1478893368.252 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:42:48.252Z,1478893368.252 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:42:48.332Z,1478893368.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:48.616Z,1478893368.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:49.020Z,1478893369.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:49.128Z,1478893369.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:49.418Z,1478893369.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:49.880Z,1478893369.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:50.676Z,1478893370.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:51.472Z,1478893371.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:51.888Z,1478893371.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:52.684Z,1478893372.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:53.416Z,1478893373.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:54.212Z,1478893374.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:55.009Z,1478893375.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:55.050Z,1478893375.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:55.120Z,1478893375.120 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20161111T044527/Express0345.lzma
2016-11-11T19:42:55.189Z,1478893375.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:55.420Z,1478893375.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:55.593Z,1478893375.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:55.914Z,1478893375.914 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0345.lzma.bak
2016-11-11T19:42:55.914Z,1478893375.914 [DataOverHttps](INFO): SBD MOMSN=4555704
2016-11-11T19:42:55.970Z,1478893375.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:56.216Z,1478893376.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:57.013Z,1478893377.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:57.307Z,1478893377.307 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T19:42:57.362Z,1478893377.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:57.371Z,1478893377.372 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T19:42:57.371Z,1478893377.372 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T19:42:57.372Z,1478893377.372 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T19:42:57.425Z,1478893377.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:57.489Z,1478893377.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:42:58.220Z,1478893378.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:59.017Z,1478893379.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:42:59.432Z,1478893379.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:00.228Z,1478893380.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:00.922Z,1478893380.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:01.024Z,1478893381.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:01.042Z,1478893381.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:01.438Z,1478893381.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:01.516Z,1478893381.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:01.848Z,1478893381.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:02.222Z,1478893382.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:02.312Z,1478893382.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:02.580Z,1478893382.580 [NAL9602](INFO): Powering down
2016-11-11T19:43:02.641Z,1478893382.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:03.032Z,1478893383.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:03.109Z,1478893383.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:03.486Z,1478893383.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:03.835Z,1478893383.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:03.872Z,1478893383.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:04.214Z,1478893384.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:04.631Z,1478893384.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:04.668Z,1478893384.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:05.037Z,1478893385.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:05.465Z,1478893385.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:05.498Z,1478893385.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:05.822Z,1478893385.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:05.876Z,1478893385.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:06.238Z,1478893386.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:06.638Z,1478893386.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:06.672Z,1478893386.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:07.052Z,1478893387.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:07.389Z,1478893387.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:07.429Z,1478893387.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:07.825Z,1478893387.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:08.184Z,1478893388.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:08.229Z,1478893388.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:08.632Z,1478893388.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:08.980Z,1478893388.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:09.051Z,1478893389.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:09.392Z,1478893389.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:09.434Z,1478893389.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:09.833Z,1478893389.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:10.188Z,1478893390.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:10.244Z,1478893390.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:10.630Z,1478893390.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:10.984Z,1478893390.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:11.064Z,1478893391.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:11.396Z,1478893391.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:11.426Z,1478893391.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:11.815Z,1478893391.815 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T19:43:11.815Z,1478893391.815 [BPC1] Data Fault, FailCount= 1
2016-11-11T19:43:11.816Z,1478893391.816 [BPC1](ERROR): Data Fault
2016-11-11T19:43:11.824Z,1478893391.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:11.873Z,1478893391.873 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T19:43:12.192Z,1478893392.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:12.234Z,1478893392.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:12.625Z,1478893392.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:12.988Z,1478893392.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:13.056Z,1478893393.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:13.104Z,1478893393.104 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:43:13.104Z,1478893393.104 [BPC1] No Fault, FailCount= 1
2016-11-11T19:43:13.400Z,1478893393.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:13.481Z,1478893393.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:13.862Z,1478893393.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:14.197Z,1478893394.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:14.225Z,1478893394.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:14.614Z,1478893394.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:14.992Z,1478893394.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:15.084Z,1478893395.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:15.425Z,1478893395.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:15.484Z,1478893395.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:15.833Z,1478893395.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:16.228Z,1478893396.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:16.280Z,1478893396.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:16.633Z,1478893396.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:17.031Z,1478893397.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:17.076Z,1478893397.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:17.502Z,1478893397.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:17.826Z,1478893397.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:17.828Z,1478893397.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:18.252Z,1478893398.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:18.624Z,1478893398.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:18.641Z,1478893398.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:19.012Z,1478893399.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:19.420Z,1478893399.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:19.501Z,1478893399.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:19.829Z,1478893399.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:19.832Z,1478893399.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:20.212Z,1478893400.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:20.617Z,1478893400.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:20.628Z,1478893400.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:21.041Z,1478893401.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:21.352Z,1478893401.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:21.424Z,1478893401.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:21.819Z,1478893401.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:22.150Z,1478893402.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:22.225Z,1478893402.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:22.650Z,1478893402.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:22.945Z,1478893402.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:23.022Z,1478893403.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:23.356Z,1478893403.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:23.437Z,1478893403.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:23.833Z,1478893403.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:24.152Z,1478893404.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:24.232Z,1478893404.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:24.619Z,1478893404.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:24.954Z,1478893404.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:25.051Z,1478893405.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:25.420Z,1478893405.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:25.419Z,1478893405.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:25.881Z,1478893405.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:26.216Z,1478893406.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:26.277Z,1478893406.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:26.658Z,1478893406.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:27.012Z,1478893407.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:27.033Z,1478893407.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:27.420Z,1478893407.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:27.469Z,1478893407.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:27.841Z,1478893407.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:28.216Z,1478893408.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:28.241Z,1478893408.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:28.613Z,1478893408.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:29.012Z,1478893409.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:29.094Z,1478893409.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:29.425Z,1478893409.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:29.468Z,1478893409.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:29.825Z,1478893409.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:30.219Z,1478893410.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:30.264Z,1478893410.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:30.624Z,1478893410.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:31.021Z,1478893411.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:31.060Z,1478893411.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:31.473Z,1478893411.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:31.828Z,1478893411.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:31.833Z,1478893411.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:32.225Z,1478893412.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:32.624Z,1478893412.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:32.635Z,1478893412.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:33.029Z,1478893413.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:33.420Z,1478893413.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:33.461Z,1478893413.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:33.817Z,1478893413.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:33.856Z,1478893413.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:34.217Z,1478893414.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:34.617Z,1478893414.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:34.652Z,1478893414.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:35.014Z,1478893415.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:35.328Z,1478893415.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:35.421Z,1478893415.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:35.820Z,1478893415.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:36.124Z,1478893416.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:36.218Z,1478893416.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:36.629Z,1478893416.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:36.921Z,1478893416.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:37.018Z,1478893417.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:37.332Z,1478893417.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:37.429Z,1478893417.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:37.830Z,1478893417.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:38.128Z,1478893418.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:38.221Z,1478893418.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:38.633Z,1478893418.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:38.925Z,1478893418.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:39.032Z,1478893419.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:39.348Z,1478893419.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:39.422Z,1478893419.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:39.865Z,1478893419.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:40.144Z,1478893420.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:40.217Z,1478893420.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:40.650Z,1478893420.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:40.941Z,1478893420.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:41.033Z,1478893421.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:41.352Z,1478893421.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:41.450Z,1478893421.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:41.846Z,1478893421.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:42.149Z,1478893422.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:42.225Z,1478893422.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:42.623Z,1478893422.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:42.944Z,1478893422.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:43.082Z,1478893423.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:43.417Z,1478893423.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:43.472Z,1478893423.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:43.819Z,1478893423.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:44.221Z,1478893424.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:44.268Z,1478893424.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:44.629Z,1478893424.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:45.019Z,1478893425.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:45.064Z,1478893425.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:45.473Z,1478893425.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:45.786Z,1478893425.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:45.829Z,1478893425.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:46.230Z,1478893426.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:46.580Z,1478893426.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:46.629Z,1478893426.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:47.023Z,1478893427.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:47.377Z,1478893427.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:47.469Z,1478893427.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:47.790Z,1478893427.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:47.822Z,1478893427.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:48.223Z,1478893428.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:48.586Z,1478893428.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:48.622Z,1478893428.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:49.033Z,1478893429.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:49.312Z,1478893429.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:49.419Z,1478893429.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:49.820Z,1478893429.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:50.108Z,1478893430.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:50.221Z,1478893430.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:50.629Z,1478893430.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:50.913Z,1478893430.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:51.029Z,1478893431.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:51.328Z,1478893431.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:51.422Z,1478893431.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:51.821Z,1478893431.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:52.124Z,1478893432.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:52.229Z,1478893432.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:52.629Z,1478893432.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:52.921Z,1478893432.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:53.027Z,1478893433.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:53.332Z,1478893433.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:53.432Z,1478893433.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:53.829Z,1478893433.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:54.128Z,1478893434.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:54.277Z,1478893434.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:54.632Z,1478893434.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:54.925Z,1478893434.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:55.061Z,1478893435.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:55.336Z,1478893435.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:55.417Z,1478893435.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:55.850Z,1478893435.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:56.132Z,1478893436.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:56.240Z,1478893436.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:56.643Z,1478893436.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:56.928Z,1478893436.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:57.086Z,1478893437.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:57.428Z,1478893437.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:57.436Z,1478893437.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:57.830Z,1478893437.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:43:58.232Z,1478893438.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:59.028Z,1478893439.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:43:59.764Z,1478893439.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:00.560Z,1478893440.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:01.357Z,1478893441.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:01.482Z,1478893441.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:01.608Z,1478893441.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:01.780Z,1478893441.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:01.981Z,1478893441.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:02.382Z,1478893442.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:02.576Z,1478893442.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:02.774Z,1478893442.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:03.177Z,1478893443.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:03.284Z,1478893443.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:03.576Z,1478893443.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:03.980Z,1478893443.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:04.080Z,1478893444.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:04.376Z,1478893444.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:04.784Z,1478893444.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:04.876Z,1478893444.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:05.170Z,1478893445.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:05.288Z,1478893445.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:05.584Z,1478893445.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:05.980Z,1478893445.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:06.084Z,1478893446.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:06.381Z,1478893446.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:06.779Z,1478893446.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:06.881Z,1478893446.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:07.189Z,1478893447.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:07.300Z,1478893447.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:07.585Z,1478893447.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:07.973Z,1478893447.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:08.096Z,1478893448.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:08.417Z,1478893448.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:08.774Z,1478893448.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:08.893Z,1478893448.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:09.191Z,1478893449.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:09.304Z,1478893449.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:09.594Z,1478893449.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:09.985Z,1478893449.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:10.100Z,1478893450.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:10.398Z,1478893450.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:10.798Z,1478893450.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:10.896Z,1478893450.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:11.173Z,1478893451.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:11.380Z,1478893451.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:11.577Z,1478893451.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:11.988Z,1478893451.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:12.176Z,1478893452.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:12.371Z,1478893452.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:12.777Z,1478893452.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:12.972Z,1478893452.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:13.178Z,1478893453.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:13.572Z,1478893453.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:13.744Z,1478893453.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:13.981Z,1478893453.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:14.381Z,1478893454.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:14.540Z,1478893454.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:14.774Z,1478893454.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:15.181Z,1478893455.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:15.348Z,1478893455.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:15.580Z,1478893455.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:15.764Z,1478893455.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:15.974Z,1478893455.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:16.373Z,1478893456.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:16.560Z,1478893456.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:16.793Z,1478893456.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:17.170Z,1478893457.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:17.300Z,1478893457.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:17.571Z,1478893457.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:17.974Z,1478893457.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:18.097Z,1478893458.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:18.372Z,1478893458.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:18.777Z,1478893458.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:18.892Z,1478893458.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:19.184Z,1478893459.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:19.300Z,1478893459.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:19.578Z,1478893459.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:19.982Z,1478893459.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:20.096Z,1478893460.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:20.385Z,1478893460.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:20.789Z,1478893460.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:20.892Z,1478893460.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:21.181Z,1478893461.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:21.300Z,1478893461.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:21.609Z,1478893461.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:21.972Z,1478893461.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:22.096Z,1478893462.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:22.391Z,1478893462.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:22.813Z,1478893462.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:22.892Z,1478893462.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:23.179Z,1478893463.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:23.300Z,1478893463.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:23.583Z,1478893463.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:24.015Z,1478893464.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:24.096Z,1478893464.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:24.380Z,1478893464.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:24.790Z,1478893464.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:24.892Z,1478893464.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:25.228Z,1478893465.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:25.380Z,1478893465.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:25.584Z,1478893465.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:25.984Z,1478893465.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:26.176Z,1478893466.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:26.385Z,1478893466.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:26.784Z,1478893466.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:26.972Z,1478893466.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:27.184Z,1478893467.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:27.573Z,1478893467.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:27.718Z,1478893467.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:27.964Z,1478893467.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:28.385Z,1478893468.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:28.512Z,1478893468.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:28.772Z,1478893468.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:29.175Z,1478893469.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:29.309Z,1478893469.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:29.577Z,1478893469.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:29.728Z,1478893469.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:29.985Z,1478893469.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:30.374Z,1478893470.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:30.524Z,1478893470.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:30.784Z,1478893470.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:31.178Z,1478893471.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:31.268Z,1478893471.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:31.571Z,1478893471.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:31.981Z,1478893471.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:32.064Z,1478893472.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:32.377Z,1478893472.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:32.777Z,1478893472.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:32.861Z,1478893472.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:33.186Z,1478893473.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:33.272Z,1478893473.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:33.575Z,1478893473.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:33.977Z,1478893473.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:34.068Z,1478893474.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:34.377Z,1478893474.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:34.777Z,1478893474.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:34.865Z,1478893474.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:35.180Z,1478893475.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:35.276Z,1478893475.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:35.589Z,1478893475.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:36.005Z,1478893476.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:36.072Z,1478893476.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:36.384Z,1478893476.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:36.784Z,1478893476.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:36.868Z,1478893476.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:37.177Z,1478893477.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:37.276Z,1478893477.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:37.617Z,1478893477.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:37.980Z,1478893477.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:38.072Z,1478893478.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:38.401Z,1478893478.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:38.780Z,1478893478.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:38.868Z,1478893478.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:39.213Z,1478893479.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:39.356Z,1478893479.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:39.601Z,1478893479.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:39.988Z,1478893479.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:40.152Z,1478893480.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:40.391Z,1478893480.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:40.789Z,1478893480.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:40.948Z,1478893480.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:41.185Z,1478893481.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:41.577Z,1478893481.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:41.692Z,1478893481.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:41.981Z,1478893481.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:42.372Z,1478893482.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:42.488Z,1478893482.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:42.780Z,1478893482.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:43.182Z,1478893483.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:43.285Z,1478893483.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:43.572Z,1478893483.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:43.696Z,1478893483.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:43.985Z,1478893483.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:44.382Z,1478893484.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:44.492Z,1478893484.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:44.774Z,1478893484.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:45.183Z,1478893485.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:45.256Z,1478893485.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:45.584Z,1478893485.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:46.030Z,1478893486.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:46.052Z,1478893486.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:46.385Z,1478893486.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:46.844Z,1478893486.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:46.848Z,1478893486.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:47.168Z,1478893487.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:47.256Z,1478893487.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:47.573Z,1478893487.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:47.969Z,1478893487.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:48.052Z,1478893488.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:48.372Z,1478893488.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:48.812Z,1478893488.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:48.849Z,1478893488.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:49.176Z,1478893489.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:49.260Z,1478893489.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:49.581Z,1478893489.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:49.984Z,1478893489.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:50.056Z,1478893490.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:50.397Z,1478893490.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:50.811Z,1478893490.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:50.852Z,1478893490.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:51.172Z,1478893491.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:51.260Z,1478893491.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:51.590Z,1478893491.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:51.986Z,1478893491.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:52.056Z,1478893492.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:52.373Z,1478893492.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:52.774Z,1478893492.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:52.852Z,1478893492.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:53.205Z,1478893493.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:53.316Z,1478893493.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:53.583Z,1478893493.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:53.994Z,1478893493.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:54.112Z,1478893494.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:54.401Z,1478893494.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:54.785Z,1478893494.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:54.908Z,1478893494.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:55.169Z,1478893495.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:55.576Z,1478893495.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:55.680Z,1478893495.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:55.977Z,1478893495.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:56.377Z,1478893496.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:56.476Z,1478893496.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:56.778Z,1478893496.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:57.180Z,1478893497.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:57.273Z,1478893497.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:57.570Z,1478893497.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:57.684Z,1478893497.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:57.987Z,1478893497.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:44:58.480Z,1478893498.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:44:59.208Z,1478893499.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:00.004Z,1478893500.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:00.803Z,1478893500.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:01.216Z,1478893501.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:01.394Z,1478893501.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:01.529Z,1478893501.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:01.928Z,1478893501.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:02.012Z,1478893502.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:02.326Z,1478893502.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:02.710Z,1478893502.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:02.809Z,1478893502.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:03.121Z,1478893503.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:03.220Z,1478893503.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:03.515Z,1478893503.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:03.915Z,1478893503.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:04.016Z,1478893504.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:04.316Z,1478893504.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:04.726Z,1478893504.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:04.812Z,1478893504.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:05.157Z,1478893505.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:05.224Z,1478893505.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:05.513Z,1478893505.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:05.917Z,1478893505.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:06.020Z,1478893506.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:06.341Z,1478893506.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:06.717Z,1478893506.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:06.817Z,1478893506.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:07.133Z,1478893507.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:07.300Z,1478893507.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:07.509Z,1478893507.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:07.929Z,1478893507.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:08.096Z,1478893508.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:08.333Z,1478893508.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:08.713Z,1478893508.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:08.892Z,1478893508.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:09.130Z,1478893509.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:09.525Z,1478893509.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:09.668Z,1478893509.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:09.912Z,1478893509.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:10.325Z,1478893510.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:10.464Z,1478893510.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:10.720Z,1478893510.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:11.120Z,1478893511.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:11.261Z,1478893511.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:11.520Z,1478893511.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:11.672Z,1478893511.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:11.920Z,1478893511.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:12.319Z,1478893512.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:12.468Z,1478893512.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:12.723Z,1478893512.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:13.132Z,1478893513.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:13.188Z,1478893513.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:13.503Z,1478893513.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:13.909Z,1478893513.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:13.985Z,1478893513.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:14.304Z,1478893514.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:14.710Z,1478893514.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:14.780Z,1478893514.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:15.121Z,1478893515.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:15.192Z,1478893515.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:15.524Z,1478893515.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:15.924Z,1478893515.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:15.988Z,1478893515.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:16.312Z,1478893516.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:16.748Z,1478893516.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:16.785Z,1478893516.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:17.109Z,1478893517.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:17.200Z,1478893517.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:17.513Z,1478893517.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:17.909Z,1478893517.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:17.997Z,1478893517.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:18.308Z,1478893518.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:18.711Z,1478893518.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:18.793Z,1478893518.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:19.146Z,1478893519.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:19.204Z,1478893519.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:19.506Z,1478893519.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:19.905Z,1478893519.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:19.000Z,1478893520.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:20.345Z,1478893520.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:20.717Z,1478893520.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:20.796Z,1478893520.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:21.117Z,1478893521.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:21.280Z,1478893521.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:21.534Z,1478893521.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:21.911Z,1478893521.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:22.076Z,1478893522.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:22.357Z,1478893522.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:22.753Z,1478893522.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:22.872Z,1478893522.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:23.112Z,1478893523.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:23.520Z,1478893523.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:23.628Z,1478893523.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:23.913Z,1478893523.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:24.313Z,1478893524.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:24.424Z,1478893524.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:24.723Z,1478893524.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:25.122Z,1478893525.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:25.221Z,1478893525.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:25.513Z,1478893525.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:25.632Z,1478893525.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:25.914Z,1478893525.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:26.322Z,1478893526.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:26.428Z,1478893526.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:26.714Z,1478893526.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:27.124Z,1478893527.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:27.184Z,1478893527.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:27.524Z,1478893527.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:27.912Z,1478893527.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:27.980Z,1478893527.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:28.328Z,1478893528.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:28.771Z,1478893528.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:28.777Z,1478893528.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:29.104Z,1478893529.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:29.188Z,1478893529.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:29.517Z,1478893529.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:29.911Z,1478893529.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:29.984Z,1478893529.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:30.311Z,1478893530.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:30.778Z,1478893530.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:30.780Z,1478893530.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:31.125Z,1478893531.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:31.188Z,1478893531.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:31.514Z,1478893531.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:31.925Z,1478893531.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:31.984Z,1478893531.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:32.328Z,1478893532.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:32.747Z,1478893532.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:32.780Z,1478893532.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:33.113Z,1478893533.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:33.188Z,1478893533.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:33.557Z,1478893533.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:33.911Z,1478893533.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:33.984Z,1478893533.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:34.319Z,1478893534.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:34.737Z,1478893534.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:34.780Z,1478893534.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:35.113Z,1478893535.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:35.260Z,1478893535.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:35.511Z,1478893535.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:35.934Z,1478893535.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:36.056Z,1478893536.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:36.311Z,1478893536.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:36.758Z,1478893536.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:36.852Z,1478893536.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:37.139Z,1478893537.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:37.529Z,1478893537.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:37.624Z,1478893537.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:37.909Z,1478893537.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:38.309Z,1478893538.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:38.421Z,1478893538.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:38.709Z,1478893538.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:39.117Z,1478893539.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:39.217Z,1478893539.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:39.514Z,1478893539.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:39.628Z,1478893539.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:39.914Z,1478893539.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:40.321Z,1478893540.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:40.424Z,1478893540.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:40.779Z,1478893540.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:41.111Z,1478893541.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:41.156Z,1478893541.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:41.513Z,1478893541.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:41.910Z,1478893541.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:41.952Z,1478893541.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:42.311Z,1478893542.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:42.749Z,1478893542.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:42.798Z,1478893542.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:43.129Z,1478893543.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:43.164Z,1478893543.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:43.525Z,1478893543.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:43.909Z,1478893543.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:43.961Z,1478893543.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:44.313Z,1478893544.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:44.757Z,1478893544.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:44.770Z,1478893544.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:45.119Z,1478893545.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:45.168Z,1478893545.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:45.511Z,1478893545.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:45.911Z,1478893545.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:45.964Z,1478893545.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:46.317Z,1478893546.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:46.760Z,1478893546.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:46.777Z,1478893546.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:47.114Z,1478893547.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:47.168Z,1478893547.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:47.521Z,1478893547.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:47.930Z,1478893547.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:47.964Z,1478893547.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:48.320Z,1478893548.320 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:48.320Z,1478893548.320 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 278
2016-11-11T19:45:48.320Z,1478893548.320 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:45:48.326Z,1478893548.326 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:48.327Z,1478893548.327 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 278
2016-11-11T19:45:48.327Z,1478893548.327 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:45:48.329Z,1478893548.329 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:48.329Z,1478893548.329 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 278
2016-11-11T19:45:48.329Z,1478893548.329 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:45:48.344Z,1478893548.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:45:48.345Z,1478893548.345 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:45:48.345Z,1478893548.345 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:45:48.697Z,1478893548.697 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T19:45:48.697Z,1478893548.697 [BPC1] Data Fault, FailCount= 1
2016-11-11T19:45:48.697Z,1478893548.697 [BPC1](ERROR): Data Fault
2016-11-11T19:45:48.760Z,1478893548.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:48.767Z,1478893548.767 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:45:48.767Z,1478893548.767 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 278
2016-11-11T19:45:48.772Z,1478893548.772 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:45:48.772Z,1478893548.772 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 278
2016-11-11T19:45:48.772Z,1478893548.772 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:45:48.772Z,1478893548.772 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 278
2016-11-11T19:45:48.773Z,1478893548.773 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T19:45:49.124Z,1478893549.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:45:49.125Z,1478893549.125 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:45:49.126Z,1478893549.126 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:45:49.143Z,1478893549.143 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:45:49.144Z,1478893549.144 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:45:49.144Z,1478893549.144 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:45:49.149Z,1478893549.149 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:45:49.150Z,1478893549.150 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:45:49.150Z,1478893549.150 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:45:49.232Z,1478893549.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:49.511Z,1478893549.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:49.911Z,1478893549.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:49.931Z,1478893549.931 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:45:49.931Z,1478893549.931 [BPC1] No Fault, FailCount= 1
2016-11-11T19:45:50.028Z,1478893550.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:50.365Z,1478893550.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:50.760Z,1478893550.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:50.824Z,1478893550.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:51.124Z,1478893551.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:51.532Z,1478893551.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:51.596Z,1478893551.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:51.904Z,1478893551.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:52.309Z,1478893552.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:52.392Z,1478893552.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:52.713Z,1478893552.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:53.107Z,1478893553.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:53.189Z,1478893553.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:53.515Z,1478893553.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:53.600Z,1478893553.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:53.911Z,1478893553.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:54.310Z,1478893554.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:54.396Z,1478893554.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:54.751Z,1478893554.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:55.117Z,1478893555.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:55.164Z,1478893555.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:55.507Z,1478893555.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:55.917Z,1478893555.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:55.960Z,1478893555.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:56.317Z,1478893556.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:56.756Z,1478893556.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:56.780Z,1478893556.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:57.135Z,1478893557.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:57.164Z,1478893557.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:57.528Z,1478893557.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:57.904Z,1478893557.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:57.960Z,1478893557.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:58.309Z,1478893558.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:45:58.756Z,1478893558.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:59.164Z,1478893559.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:45:59.960Z,1478893559.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:00.756Z,1478893560.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:01.164Z,1478893561.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:01.898Z,1478893561.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:01.960Z,1478893561.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:02.016Z,1478893562.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:02.392Z,1478893562.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:02.756Z,1478893562.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:02.898Z,1478893562.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:03.200Z,1478893563.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:03.252Z,1478893563.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:03.599Z,1478893563.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:04.031Z,1478893564.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:04.048Z,1478893564.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:04.405Z,1478893564.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:04.834Z,1478893564.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:04.844Z,1478893564.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:05.238Z,1478893565.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:05.592Z,1478893565.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:05.625Z,1478893565.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:06.007Z,1478893566.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:06.388Z,1478893566.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:06.405Z,1478893566.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:06.813Z,1478893566.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:07.185Z,1478893567.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:07.243Z,1478893567.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:07.596Z,1478893567.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:07.596Z,1478893567.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:07.992Z,1478893567.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:08.392Z,1478893568.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:08.405Z,1478893568.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:08.797Z,1478893568.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:09.092Z,1478893569.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:09.200Z,1478893569.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:09.602Z,1478893569.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:09.888Z,1478893569.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:10.005Z,1478893570.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:10.400Z,1478893570.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:10.685Z,1478893570.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:10.813Z,1478893570.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:11.096Z,1478893571.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:11.212Z,1478893571.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:11.608Z,1478893571.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:11.892Z,1478893571.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:12.000Z,1478893572.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:12.418Z,1478893572.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:12.438Z,1478893572.438 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T19:46:12.689Z,1478893572.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:12.814Z,1478893572.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:13.100Z,1478893573.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:13.217Z,1478893573.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:13.621Z,1478893573.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:13.896Z,1478893573.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:14.005Z,1478893574.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:14.402Z,1478893574.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:14.693Z,1478893574.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:14.808Z,1478893574.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:15.104Z,1478893575.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:15.201Z,1478893575.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:15.602Z,1478893575.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:15.900Z,1478893575.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:15.991Z,1478893575.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:16.429Z,1478893576.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:16.696Z,1478893576.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:16.858Z,1478893576.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:17.212Z,1478893577.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:17.228Z,1478893577.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:17.637Z,1478893577.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:17.997Z,1478893577.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:18.024Z,1478893578.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:18.401Z,1478893578.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:18.820Z,1478893578.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:18.826Z,1478893578.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:19.220Z,1478893579.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:19.548Z,1478893579.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:19.637Z,1478893579.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:20.034Z,1478893580.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:20.344Z,1478893580.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:20.413Z,1478893580.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:20.805Z,1478893580.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:21.141Z,1478893581.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:21.234Z,1478893581.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:21.552Z,1478893581.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:21.592Z,1478893581.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:21.998Z,1478893581.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:22.348Z,1478893582.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:22.398Z,1478893582.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:22.820Z,1478893582.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:23.072Z,1478893583.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:23.202Z,1478893583.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:23.605Z,1478893583.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:23.869Z,1478893583.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:24.009Z,1478893584.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:24.399Z,1478893584.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:24.665Z,1478893584.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:24.809Z,1478893584.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:25.077Z,1478893585.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:25.211Z,1478893585.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:25.609Z,1478893585.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:25.872Z,1478893585.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:26.009Z,1478893586.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:26.409Z,1478893586.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:26.669Z,1478893586.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:26.811Z,1478893586.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:27.080Z,1478893587.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:27.202Z,1478893587.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:27.599Z,1478893587.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:27.876Z,1478893587.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:28.007Z,1478893588.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:28.403Z,1478893588.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:28.673Z,1478893588.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:28.810Z,1478893588.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:29.092Z,1478893589.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:29.213Z,1478893589.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:29.602Z,1478893589.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:29.888Z,1478893589.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:30.009Z,1478893590.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:30.412Z,1478893590.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:30.684Z,1478893590.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:30.884Z,1478893590.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:31.205Z,1478893591.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:31.249Z,1478893591.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:31.599Z,1478893591.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:31.999Z,1478893591.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:32.044Z,1478893592.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:32.413Z,1478893592.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:32.810Z,1478893592.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:32.842Z,1478893592.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:33.229Z,1478893593.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:33.532Z,1478893593.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:33.608Z,1478893593.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:34.012Z,1478893594.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:34.328Z,1478893594.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:34.404Z,1478893594.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:34.811Z,1478893594.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:35.136Z,1478893595.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:35.188Z,1478893595.188 [BPC1](ERROR): Failed to receive battery data
2016-11-11T19:46:35.188Z,1478893595.188 [BPC1] Communications Fault, FailCount= 1
2016-11-11T19:46:35.188Z,1478893595.188 [BPC1](ERROR): Communications Fault
2016-11-11T19:46:35.218Z,1478893595.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:35.266Z,1478893595.266 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T19:46:35.592Z,1478893595.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:35.598Z,1478893595.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:36.001Z,1478893596.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:36.388Z,1478893596.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:36.400Z,1478893596.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:36.453Z,1478893596.453 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:46:36.453Z,1478893596.453 [BPC1] No Fault, FailCount= 1
2016-11-11T19:46:36.867Z,1478893596.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:37.052Z,1478893597.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:37.219Z,1478893597.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:37.601Z,1478893597.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:37.848Z,1478893597.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:37.996Z,1478893597.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:38.397Z,1478893598.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:38.645Z,1478893598.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:38.804Z,1478893598.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:39.060Z,1478893599.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:39.198Z,1478893599.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:39.605Z,1478893599.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:39.856Z,1478893599.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:40.006Z,1478893600.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:40.399Z,1478893600.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:40.653Z,1478893600.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:40.807Z,1478893600.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:41.065Z,1478893601.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:41.210Z,1478893601.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:41.602Z,1478893601.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:41.860Z,1478893601.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:42.009Z,1478893602.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:42.410Z,1478893602.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:42.657Z,1478893602.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:42.811Z,1478893602.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:43.068Z,1478893603.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:43.202Z,1478893603.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:43.621Z,1478893603.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:43.864Z,1478893603.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:43.998Z,1478893603.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:44.397Z,1478893604.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:44.662Z,1478893604.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:44.835Z,1478893604.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:45.148Z,1478893605.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:45.202Z,1478893605.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:45.609Z,1478893605.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:45.944Z,1478893605.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:46.010Z,1478893606.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:46.408Z,1478893606.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:46.742Z,1478893606.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:46.810Z,1478893606.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:47.199Z,1478893607.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:47.500Z,1478893607.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:47.655Z,1478893607.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:48.008Z,1478893608.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:48.296Z,1478893608.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:48.409Z,1478893608.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:48.855Z,1478893608.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:49.093Z,1478893609.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:49.244Z,1478893609.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:49.504Z,1478893609.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:49.652Z,1478893609.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:50.006Z,1478893610.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:50.300Z,1478893610.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:50.465Z,1478893610.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:50.868Z,1478893610.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:51.036Z,1478893611.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:51.214Z,1478893611.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:51.633Z,1478893611.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:51.832Z,1478893611.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:52.015Z,1478893612.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:52.418Z,1478893612.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:52.629Z,1478893612.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:52.821Z,1478893612.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:53.048Z,1478893613.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:53.222Z,1478893613.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:53.594Z,1478893613.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:53.845Z,1478893613.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:54.034Z,1478893614.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:54.398Z,1478893614.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:54.641Z,1478893614.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:54.820Z,1478893614.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:55.053Z,1478893615.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:55.220Z,1478893615.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:55.638Z,1478893615.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:55.848Z,1478893615.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:56.009Z,1478893616.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:56.413Z,1478893616.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:56.645Z,1478893616.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:56.805Z,1478893616.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:57.056Z,1478893617.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:57.207Z,1478893617.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:57.609Z,1478893617.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:57.852Z,1478893617.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:58.009Z,1478893618.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:58.428Z,1478893618.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:46:58.648Z,1478893618.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:59.132Z,1478893619.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:46:59.928Z,1478893619.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:00.724Z,1478893620.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:01.484Z,1478893621.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:02.280Z,1478893622.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:02.738Z,1478893622.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:02.982Z,1478893622.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:03.076Z,1478893623.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:03.321Z,1478893623.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:03.488Z,1478893623.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:03.699Z,1478893623.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:04.109Z,1478893624.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:04.284Z,1478893624.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:04.521Z,1478893624.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:04.945Z,1478893624.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:05.032Z,1478893625.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:05.314Z,1478893625.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:05.695Z,1478893625.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:05.828Z,1478893625.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:06.109Z,1478893626.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:06.501Z,1478893626.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:06.625Z,1478893626.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:06.888Z,1478893626.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:07.036Z,1478893627.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:07.297Z,1478893627.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:07.674Z,1478893627.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:07.832Z,1478893627.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:08.078Z,1478893628.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:08.482Z,1478893628.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:08.628Z,1478893628.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:08.890Z,1478893628.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:09.036Z,1478893629.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:09.297Z,1478893629.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:09.704Z,1478893629.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:09.832Z,1478893629.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:10.106Z,1478893630.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:10.505Z,1478893630.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:10.628Z,1478893630.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:10.896Z,1478893630.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:11.036Z,1478893631.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:11.298Z,1478893631.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:11.689Z,1478893631.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:11.832Z,1478893631.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:12.089Z,1478893632.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:12.494Z,1478893632.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:12.629Z,1478893632.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:12.894Z,1478893632.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:13.108Z,1478893633.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:13.300Z,1478893633.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:13.688Z,1478893633.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:13.905Z,1478893633.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:14.093Z,1478893634.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:14.489Z,1478893634.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:14.700Z,1478893634.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:14.907Z,1478893634.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:15.286Z,1478893635.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:15.464Z,1478893635.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:15.675Z,1478893635.675 [BPC1](ERROR): Failed to parse message.
2016-11-11T19:47:15.675Z,1478893635.675 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T19:47:15.675Z,1478893635.675 [BPC1] Data Fault, FailCount= 1
2016-11-11T19:47:15.675Z,1478893635.675 [BPC1](ERROR): Data Fault
2016-11-11T19:47:15.697Z,1478893635.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:15.763Z,1478893635.763 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T19:47:16.117Z,1478893636.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:16.260Z,1478893636.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:16.506Z,1478893636.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:16.889Z,1478893636.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:16.954Z,1478893636.954 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:47:16.954Z,1478893636.954 [BPC1] No Fault, FailCount= 1
2016-11-11T19:47:17.057Z,1478893637.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:17.364Z,1478893637.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:17.468Z,1478893637.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:17.725Z,1478893637.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:18.093Z,1478893638.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:18.264Z,1478893638.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:18.474Z,1478893638.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:18.889Z,1478893638.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:18.984Z,1478893638.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:19.293Z,1478893639.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:19.670Z,1478893639.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:19.780Z,1478893639.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:20.070Z,1478893640.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:20.477Z,1478893640.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:20.577Z,1478893640.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:20.890Z,1478893640.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:20.992Z,1478893640.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:21.287Z,1478893641.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:21.725Z,1478893641.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:21.788Z,1478893641.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:22.090Z,1478893642.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:22.491Z,1478893642.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:22.585Z,1478893642.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:22.902Z,1478893642.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:22.996Z,1478893642.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:23.286Z,1478893643.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:23.697Z,1478893643.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:23.792Z,1478893643.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:24.093Z,1478893644.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:24.473Z,1478893644.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:24.589Z,1478893644.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:24.881Z,1478893644.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:24.000Z,1478893645.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:25.284Z,1478893645.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:25.680Z,1478893645.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:25.796Z,1478893645.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:26.085Z,1478893646.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:26.480Z,1478893646.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:26.592Z,1478893646.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:26.879Z,1478893646.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:27.084Z,1478893647.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:27.281Z,1478893647.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:27.685Z,1478893647.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:27.881Z,1478893647.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:28.097Z,1478893648.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:28.488Z,1478893648.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:28.676Z,1478893648.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:28.865Z,1478893648.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:29.273Z,1478893649.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:29.432Z,1478893649.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:29.718Z,1478893649.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:30.114Z,1478893650.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:30.228Z,1478893650.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:30.472Z,1478893650.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:30.915Z,1478893650.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:31.025Z,1478893651.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:31.277Z,1478893651.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:31.436Z,1478893651.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:31.706Z,1478893651.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:32.111Z,1478893652.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:32.232Z,1478893652.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:32.470Z,1478893652.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:32.873Z,1478893652.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:32.961Z,1478893652.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:33.276Z,1478893653.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:33.677Z,1478893653.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:33.756Z,1478893653.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:34.075Z,1478893654.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:34.479Z,1478893654.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:34.553Z,1478893654.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:34.891Z,1478893654.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:34.972Z,1478893654.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:35.285Z,1478893655.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:35.689Z,1478893655.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:35.768Z,1478893655.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:36.071Z,1478893656.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:36.471Z,1478893656.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:36.565Z,1478893656.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:36.869Z,1478893656.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:36.976Z,1478893656.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:37.267Z,1478893657.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:37.667Z,1478893657.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:37.772Z,1478893657.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:38.076Z,1478893658.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:38.477Z,1478893658.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:38.569Z,1478893658.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:38.885Z,1478893658.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:38.980Z,1478893658.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:39.294Z,1478893659.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:39.677Z,1478893659.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:39.776Z,1478893659.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:40.072Z,1478893660.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:40.477Z,1478893660.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:40.572Z,1478893660.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:40.870Z,1478893660.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:41.060Z,1478893661.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:41.281Z,1478893661.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:41.676Z,1478893661.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:41.856Z,1478893661.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:42.077Z,1478893662.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:42.476Z,1478893662.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:42.652Z,1478893662.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:42.905Z,1478893662.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:43.285Z,1478893663.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:43.418Z,1478893663.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:43.684Z,1478893663.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:44.101Z,1478893664.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:44.212Z,1478893664.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:44.470Z,1478893664.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:44.869Z,1478893664.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:45.009Z,1478893665.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:45.301Z,1478893665.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:45.420Z,1478893665.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:45.677Z,1478893665.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:46.113Z,1478893666.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:46.216Z,1478893666.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:46.566Z,1478893666.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:46.881Z,1478893666.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:46.945Z,1478893666.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:47.285Z,1478893667.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:47.684Z,1478893667.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:47.740Z,1478893667.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:48.084Z,1478893668.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:48.480Z,1478893668.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:48.537Z,1478893668.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:48.877Z,1478893668.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:48.952Z,1478893668.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:49.271Z,1478893669.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:49.670Z,1478893669.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:49.748Z,1478893669.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:50.077Z,1478893670.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:50.477Z,1478893670.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:50.545Z,1478893670.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:50.884Z,1478893670.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:50.956Z,1478893670.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:51.283Z,1478893671.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:51.684Z,1478893671.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:51.752Z,1478893671.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:52.072Z,1478893672.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:52.523Z,1478893672.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:52.549Z,1478893672.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:52.870Z,1478893672.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:52.960Z,1478893672.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:53.273Z,1478893673.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:53.671Z,1478893673.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:53.756Z,1478893673.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:54.077Z,1478893674.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:54.470Z,1478893674.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:54.553Z,1478893674.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:54.879Z,1478893674.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:55.040Z,1478893675.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:55.273Z,1478893675.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:55.673Z,1478893675.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:55.836Z,1478893675.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:56.079Z,1478893676.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:56.473Z,1478893676.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:56.632Z,1478893676.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:56.881Z,1478893676.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:57.309Z,1478893677.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:57.392Z,1478893677.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:57.677Z,1478893677.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:57.686Z,1478893677.686 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T19:47:57.686Z,1478893677.686 [Default:CheckIn:C.Wait] Stopped
2016-11-11T19:47:57.686Z,1478893677.686 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T19:47:57.686Z,1478893677.686 [Default:CheckIn:D] Running Loop=1
2016-11-11T19:47:58.071Z,1478893678.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:58.080Z,1478893678.080 [Default:CheckIn:D] Stopped
2016-11-11T19:47:58.080Z,1478893678.080 [Default:CheckIn:E] Running Loop=1
2016-11-11T19:47:58.189Z,1478893678.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:58.523Z,1478893678.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:47:58.548Z,1478893678.547 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 897.946159 min 
2016-11-11T19:47:58.548Z,1478893678.548 [Default:CheckIn:E] Stopped
2016-11-11T19:47:58.548Z,1478893678.548 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T19:47:58.548Z,1478893678.548 [Default:CheckIn] Stopped
2016-11-11T19:47:58.548Z,1478893678.548 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T19:47:58.548Z,1478893678.548 [Default:CheckIn](INFO): Running loop #87
2016-11-11T19:47:58.548Z,1478893678.548 [Default:CheckIn] Running Loop=87
2016-11-11T19:47:58.549Z,1478893678.549 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T19:47:58.549Z,1478893678.549 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T19:47:58.984Z,1478893678.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:47:59.396Z,1478893679.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:00.192Z,1478893680.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:00.920Z,1478893680.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:01.716Z,1478893681.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:01.897Z,1478893681.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:01.986Z,1478893681.986 [NAL9602](INFO): Powering up
2016-11-11T19:48:02.038Z,1478893682.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:02.408Z,1478893682.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:02.512Z,1478893682.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:02.797Z,1478893682.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:02.925Z,1478893682.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:03.229Z,1478893683.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:03.604Z,1478893683.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:03.720Z,1478893683.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:04.034Z,1478893684.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:04.434Z,1478893684.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:04.517Z,1478893684.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:04.808Z,1478893684.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:04.932Z,1478893684.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:05.209Z,1478893685.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:05.604Z,1478893685.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:05.728Z,1478893685.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:06.006Z,1478893686.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:06.402Z,1478893686.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:06.525Z,1478893686.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:06.812Z,1478893686.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:06.932Z,1478893686.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:07.216Z,1478893687.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:07.616Z,1478893687.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:07.728Z,1478893687.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:08.008Z,1478893688.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:08.415Z,1478893688.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:08.524Z,1478893688.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:08.816Z,1478893688.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:09.024Z,1478893689.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:09.212Z,1478893689.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:09.617Z,1478893689.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:09.820Z,1478893689.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:09.999Z,1478893689.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:10.399Z,1478893690.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:10.616Z,1478893690.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:10.808Z,1478893690.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:11.209Z,1478893691.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:11.360Z,1478893691.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:11.603Z,1478893691.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:12.013Z,1478893692.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:12.156Z,1478893692.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:12.403Z,1478893692.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:12.817Z,1478893692.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:12.953Z,1478893692.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:13.173Z,1478893693.173 [NAL9602](INFO): NAL9602 initialized
2016-11-11T19:48:13.216Z,1478893693.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:13.364Z,1478893693.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:13.612Z,1478893693.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:13.965Z,1478893693.965 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T19:48:13.965Z,1478893693.965 [NAL9602] Data Fault, FailCount= 2
2016-11-11T19:48:13.965Z,1478893693.965 [NAL9602](ERROR): Data Fault
2016-11-11T19:48:14.005Z,1478893694.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:14.025Z,1478893694.025 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T19:48:14.160Z,1478893694.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:14.373Z,1478893694.373 [NAL9602](INFO): Powering down
2016-11-11T19:48:14.421Z,1478893694.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:14.817Z,1478893694.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:14.884Z,1478893694.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:15.237Z,1478893695.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:15.278Z,1478893695.278 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T19:48:15.278Z,1478893695.278 [NAL9602] No Fault, FailCount= 2
2016-11-11T19:48:15.621Z,1478893695.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:15.680Z,1478893695.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:16.001Z,1478893696.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:16.433Z,1478893696.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:16.477Z,1478893696.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:16.814Z,1478893696.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:16.904Z,1478893696.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:17.238Z,1478893697.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:17.613Z,1478893697.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:17.700Z,1478893697.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:18.046Z,1478893698.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:18.426Z,1478893698.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:18.497Z,1478893698.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:18.805Z,1478893698.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:18.908Z,1478893698.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:19.203Z,1478893699.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:19.572Z,1478893699.572 [NAL9602](INFO): Powering up NAL9602
2016-11-11T19:48:19.610Z,1478893699.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:19.704Z,1478893699.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:20.003Z,1478893700.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:20.402Z,1478893700.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:20.501Z,1478893700.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:20.811Z,1478893700.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:20.912Z,1478893700.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:21.205Z,1478893701.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:21.620Z,1478893701.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:21.709Z,1478893701.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:22.005Z,1478893702.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:22.406Z,1478893702.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:22.504Z,1478893702.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:22.815Z,1478893702.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:22.988Z,1478893702.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:23.212Z,1478893703.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:23.612Z,1478893703.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:23.784Z,1478893703.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:24.015Z,1478893704.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:24.412Z,1478893704.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:24.580Z,1478893704.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:24.813Z,1478893704.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:25.212Z,1478893705.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:25.352Z,1478893705.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:25.613Z,1478893705.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:26.012Z,1478893706.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:26.148Z,1478893706.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:26.411Z,1478893706.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:26.812Z,1478893706.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:26.945Z,1478893706.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:27.212Z,1478893707.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:27.356Z,1478893707.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:27.611Z,1478893707.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:28.016Z,1478893708.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:28.152Z,1478893708.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:28.412Z,1478893708.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:28.815Z,1478893708.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:28.868Z,1478893708.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:29.237Z,1478893709.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:29.596Z,1478893709.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:29.664Z,1478893709.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:29.997Z,1478893709.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:30.461Z,1478893710.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:30.508Z,1478893710.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:30.765Z,1478893710.765 [NAL9602](INFO): NAL9602 initialized
2016-11-11T19:48:30.810Z,1478893710.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:30.872Z,1478893710.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:31.213Z,1478893711.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:31.650Z,1478893711.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:31.668Z,1478893711.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:32.027Z,1478893712.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:32.464Z,1478893712.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:32.473Z,1478893712.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:32.837Z,1478893712.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:32.888Z,1478893712.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:33.202Z,1478893713.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:33.610Z,1478893713.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:33.684Z,1478893713.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:34.009Z,1478893714.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:34.402Z,1478893714.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:34.481Z,1478893714.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:34.813Z,1478893714.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:34.892Z,1478893714.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:35.216Z,1478893715.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:35.605Z,1478893715.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:35.688Z,1478893715.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:36.009Z,1478893716.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:36.412Z,1478893716.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:36.484Z,1478893716.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:36.805Z,1478893716.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:36.964Z,1478893716.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:37.213Z,1478893717.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:37.630Z,1478893717.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:37.760Z,1478893717.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:38.021Z,1478893718.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:38.413Z,1478893718.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:38.556Z,1478893718.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:38.814Z,1478893718.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:39.202Z,1478893719.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:39.316Z,1478893719.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:39.609Z,1478893719.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:40.009Z,1478893720.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:40.112Z,1478893720.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:40.412Z,1478893720.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:40.805Z,1478893720.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:40.908Z,1478893720.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:41.204Z,1478893721.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:41.324Z,1478893721.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:41.611Z,1478893721.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:42.021Z,1478893722.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:42.120Z,1478893722.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:42.477Z,1478893722.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:42.808Z,1478893722.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:42.848Z,1478893722.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:43.205Z,1478893723.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:43.606Z,1478893723.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:43.644Z,1478893723.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:44.046Z,1478893724.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:44.440Z,1478893724.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:44.474Z,1478893724.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:44.856Z,1478893724.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:44.860Z,1478893724.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:45.212Z,1478893725.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:45.615Z,1478893725.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:45.652Z,1478893725.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:46.049Z,1478893726.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:46.450Z,1478893726.450 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:46.486Z,1478893726.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:46.841Z,1478893726.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:46.860Z,1478893726.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:47.233Z,1478893727.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:47.601Z,1478893727.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:47.656Z,1478893727.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:48.002Z,1478893728.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:48.453Z,1478893728.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:48.484Z,1478893728.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:48.805Z,1478893728.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:48.864Z,1478893728.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:49.203Z,1478893729.203 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:49.203Z,1478893729.203 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 279
2016-11-11T19:48:49.203Z,1478893729.203 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:48:49.209Z,1478893729.210 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:49.210Z,1478893729.210 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 279
2016-11-11T19:48:49.210Z,1478893729.210 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:48:49.212Z,1478893729.212 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:49.212Z,1478893729.212 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 279
2016-11-11T19:48:49.212Z,1478893729.212 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:48:49.226Z,1478893729.226 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:48:49.226Z,1478893729.226 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:48:49.226Z,1478893729.226 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:48:49.660Z,1478893729.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:49.661Z,1478893729.661 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:48:49.661Z,1478893729.661 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 279
2016-11-11T19:48:49.662Z,1478893729.662 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:48:49.662Z,1478893729.662 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 279
2016-11-11T19:48:49.663Z,1478893729.662 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:48:49.663Z,1478893729.663 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 279
2016-11-11T19:48:50.011Z,1478893730.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:48:50.011Z,1478893730.011 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:48:50.012Z,1478893730.012 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:48:50.016Z,1478893730.016 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:48:50.017Z,1478893730.017 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:48:50.017Z,1478893730.017 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:48:50.018Z,1478893730.018 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:48:50.018Z,1478893730.018 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:48:50.019Z,1478893730.019 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:48:50.428Z,1478893730.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:50.456Z,1478893730.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:50.807Z,1478893730.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:50.940Z,1478893730.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:51.208Z,1478893731.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:51.604Z,1478893731.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:51.736Z,1478893731.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:52.010Z,1478893732.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:52.409Z,1478893732.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:52.533Z,1478893732.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:52.808Z,1478893732.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:53.197Z,1478893733.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:53.296Z,1478893733.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:53.602Z,1478893733.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:53.996Z,1478893733.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:54.092Z,1478893734.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:54.410Z,1478893734.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:54.808Z,1478893734.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:54.888Z,1478893734.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:55.218Z,1478893735.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:55.304Z,1478893735.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:55.613Z,1478893735.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:56.016Z,1478893736.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:56.100Z,1478893736.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:56.489Z,1478893736.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:56.801Z,1478893736.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:56.856Z,1478893736.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:57.209Z,1478893737.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:57.613Z,1478893737.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:57.652Z,1478893737.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:58.038Z,1478893738.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:58.449Z,1478893738.450 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:58.481Z,1478893738.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:58.812Z,1478893738.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:48:58.860Z,1478893738.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:48:59.656Z,1478893739.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:00.452Z,1478893740.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:00.860Z,1478893740.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:01.656Z,1478893741.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:02.230Z,1478893742.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:02.408Z,1478893742.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:02.452Z,1478893742.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:02.733Z,1478893742.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:02.860Z,1478893742.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:03.158Z,1478893743.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:03.541Z,1478893743.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:03.657Z,1478893743.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:03.969Z,1478893743.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:04.354Z,1478893744.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:04.453Z,1478893744.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:04.729Z,1478893744.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:04.944Z,1478893744.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:05.137Z,1478893745.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:05.533Z,1478893745.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:05.740Z,1478893745.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:05.926Z,1478893745.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:06.337Z,1478893746.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:06.536Z,1478893746.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:06.728Z,1478893746.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:07.129Z,1478893747.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:07.272Z,1478893747.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:07.537Z,1478893747.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:07.949Z,1478893747.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:08.068Z,1478893748.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:08.336Z,1478893748.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:08.735Z,1478893748.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:08.865Z,1478893748.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:09.136Z,1478893749.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:09.276Z,1478893749.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:09.536Z,1478893749.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:09.953Z,1478893749.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:10.073Z,1478893750.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:10.345Z,1478893750.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:10.725Z,1478893750.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:10.812Z,1478893750.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:11.132Z,1478893751.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:11.534Z,1478893751.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:11.608Z,1478893751.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:11.926Z,1478893751.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:12.337Z,1478893752.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:12.405Z,1478893752.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:12.733Z,1478893752.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:12.816Z,1478893752.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:13.141Z,1478893753.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:13.525Z,1478893753.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:13.612Z,1478893753.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:13.925Z,1478893753.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:14.349Z,1478893754.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:14.408Z,1478893754.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:14.737Z,1478893754.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:14.820Z,1478893754.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:15.130Z,1478893755.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:15.526Z,1478893755.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:15.616Z,1478893755.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:15.933Z,1478893755.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:16.413Z,1478893756.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:16.425Z,1478893756.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:16.769Z,1478893756.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:16.824Z,1478893756.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:17.125Z,1478893757.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:17.560Z,1478893757.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:17.621Z,1478893757.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:17.925Z,1478893757.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:18.358Z,1478893758.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:18.416Z,1478893758.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:18.765Z,1478893758.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:18.896Z,1478893758.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:19.130Z,1478893759.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:19.531Z,1478893759.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:19.692Z,1478893759.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:19.936Z,1478893759.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:20.336Z,1478893760.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:20.488Z,1478893760.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:20.744Z,1478893760.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:21.127Z,1478893761.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:21.256Z,1478893761.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:21.533Z,1478893761.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:21.927Z,1478893761.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:22.052Z,1478893762.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:22.337Z,1478893762.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:22.735Z,1478893762.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:22.849Z,1478893762.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:23.133Z,1478893763.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:23.264Z,1478893763.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:23.533Z,1478893763.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:23.929Z,1478893763.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:24.060Z,1478893764.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:24.336Z,1478893764.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:24.722Z,1478893764.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:24.804Z,1478893764.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:25.153Z,1478893765.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:25.553Z,1478893765.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:25.600Z,1478893765.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:25.949Z,1478893765.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:26.326Z,1478893766.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:26.396Z,1478893766.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:26.733Z,1478893766.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:26.808Z,1478893766.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:27.128Z,1478893767.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:27.534Z,1478893767.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:27.604Z,1478893767.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:27.937Z,1478893767.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:28.377Z,1478893768.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:28.400Z,1478893768.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:28.732Z,1478893768.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:28.808Z,1478893768.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:29.128Z,1478893769.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:29.526Z,1478893769.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:29.604Z,1478893769.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:29.933Z,1478893769.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:30.352Z,1478893770.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:30.400Z,1478893770.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:30.754Z,1478893770.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:30.812Z,1478893770.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:31.161Z,1478893771.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:31.525Z,1478893771.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:31.609Z,1478893771.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:31.953Z,1478893771.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:32.325Z,1478893772.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:32.404Z,1478893772.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:32.753Z,1478893772.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:32.872Z,1478893772.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:33.157Z,1478893773.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:33.531Z,1478893773.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:33.668Z,1478893773.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:33.930Z,1478893773.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:34.323Z,1478893774.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:34.464Z,1478893774.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:34.732Z,1478893774.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:35.137Z,1478893775.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:35.232Z,1478893775.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:35.525Z,1478893775.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:35.938Z,1478893775.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:36.028Z,1478893776.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:36.329Z,1478893776.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:36.733Z,1478893776.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:36.824Z,1478893776.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:37.121Z,1478893777.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:37.236Z,1478893777.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:37.525Z,1478893777.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:37.952Z,1478893777.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:38.033Z,1478893778.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:38.410Z,1478893778.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:38.733Z,1478893778.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:38.780Z,1478893778.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:39.128Z,1478893779.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:39.534Z,1478893779.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:39.576Z,1478893779.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:39.933Z,1478893779.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:40.373Z,1478893780.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:40.406Z,1478893780.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:40.745Z,1478893780.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:40.784Z,1478893780.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:41.133Z,1478893781.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:41.527Z,1478893781.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:41.580Z,1478893781.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:41.935Z,1478893781.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:42.377Z,1478893782.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:42.402Z,1478893782.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:42.753Z,1478893782.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:42.788Z,1478893782.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:43.144Z,1478893783.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:43.543Z,1478893783.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:43.584Z,1478893783.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:43.937Z,1478893783.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:44.380Z,1478893784.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:44.398Z,1478893784.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:44.729Z,1478893784.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:44.792Z,1478893784.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:45.167Z,1478893785.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:45.577Z,1478893785.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:45.588Z,1478893785.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:45.928Z,1478893785.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:46.371Z,1478893786.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:46.384Z,1478893786.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:46.733Z,1478893786.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:46.852Z,1478893786.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:47.177Z,1478893787.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:47.579Z,1478893787.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:47.648Z,1478893787.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:47.943Z,1478893787.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:48.344Z,1478893788.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:48.444Z,1478893788.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:48.737Z,1478893788.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:49.141Z,1478893789.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:49.216Z,1478893789.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:49.541Z,1478893789.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:49.919Z,1478893789.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:50.012Z,1478893790.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:50.329Z,1478893790.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:50.729Z,1478893790.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:50.809Z,1478893790.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:51.121Z,1478893791.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:51.220Z,1478893791.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:51.521Z,1478893791.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:51.946Z,1478893791.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:52.016Z,1478893792.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:52.418Z,1478893792.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:52.740Z,1478893792.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:52.753Z,1478893792.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:53.127Z,1478893793.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:53.523Z,1478893793.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:53.536Z,1478893793.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:53.932Z,1478893793.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:54.332Z,1478893794.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:54.382Z,1478893794.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:54.735Z,1478893794.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:54.772Z,1478893794.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:55.133Z,1478893795.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:55.530Z,1478893795.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:55.568Z,1478893795.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:55.933Z,1478893795.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:56.364Z,1478893796.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:56.422Z,1478893796.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:56.744Z,1478893796.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:56.772Z,1478893796.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:57.150Z,1478893797.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:57.546Z,1478893797.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:57.568Z,1478893797.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:57.965Z,1478893797.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:58.364Z,1478893798.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:58.408Z,1478893798.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:58.745Z,1478893798.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:58.772Z,1478893798.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:49:59.129Z,1478893799.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:49:59.568Z,1478893799.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:00.364Z,1478893800.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:00.828Z,1478893800.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:01.624Z,1478893801.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:02.420Z,1478893802.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:02.650Z,1478893802.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:02.836Z,1478893802.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:03.213Z,1478893803.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:03.216Z,1478893803.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:03.573Z,1478893803.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:03.624Z,1478893803.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:03.973Z,1478893803.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:04.370Z,1478893804.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:04.420Z,1478893804.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:04.793Z,1478893804.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:05.163Z,1478893805.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:05.188Z,1478893805.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:05.559Z,1478893805.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:05.957Z,1478893805.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:05.984Z,1478893805.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:06.390Z,1478893806.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:06.764Z,1478893806.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:06.766Z,1478893806.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:07.158Z,1478893807.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:07.560Z,1478893807.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:07.578Z,1478893807.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:07.966Z,1478893807.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:08.356Z,1478893808.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:08.403Z,1478893808.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:08.761Z,1478893808.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:08.764Z,1478893808.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:09.137Z,1478893809.137 [PNI_TCM](ERROR): CRC does not match. Expected:0x18980 got:0x48730
2016-11-11T19:50:09.160Z,1478893809.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:09.560Z,1478893809.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:09.564Z,1478893809.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:09.972Z,1478893809.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:10.356Z,1478893810.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:10.384Z,1478893810.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:10.764Z,1478893810.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:10.764Z,1478893810.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:11.159Z,1478893811.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:11.560Z,1478893811.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:11.566Z,1478893811.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:11.955Z,1478893811.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:12.356Z,1478893812.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:12.376Z,1478893812.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:12.762Z,1478893812.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:12.764Z,1478893812.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:13.166Z,1478893813.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:13.560Z,1478893813.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:13.564Z,1478893813.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:13.965Z,1478893813.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:14.356Z,1478893814.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:14.440Z,1478893814.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:14.773Z,1478893814.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:14.824Z,1478893814.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:15.164Z,1478893815.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:15.538Z,1478893815.538 [PNI_TCM](ERROR): CRC does not match. Expected:0x12160 got:0x7490
2016-11-11T19:50:15.566Z,1478893815.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:15.620Z,1478893815.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:15.953Z,1478893815.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:16.405Z,1478893816.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:16.416Z,1478893816.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:16.809Z,1478893816.809 [PNI_TCM](ERROR): CRC does not match. Expected:0x58831 got:0x51997
2016-11-11T19:50:16.852Z,1478893816.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:17.165Z,1478893817.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:17.180Z,1478893817.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:17.553Z,1478893817.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:17.976Z,1478893817.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:17.979Z,1478893817.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:18.346Z,1478893818.346 [PNI_TCM](ERROR): CRC does not match. Expected:0x1268 got:0x31494
2016-11-11T19:50:18.373Z,1478893818.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:18.772Z,1478893818.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:18.842Z,1478893818.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:19.148Z,1478893819.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:19.184Z,1478893819.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:19.593Z,1478893819.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:19.941Z,1478893819.941 [PNI_TCM](ERROR): CRC does not match. Expected:0x28791 got:0x13686
2016-11-11T19:50:19.980Z,1478893819.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:19.982Z,1478893819.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:20.382Z,1478893820.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:20.696Z,1478893820.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:20.754Z,1478893820.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:21.165Z,1478893821.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:21.492Z,1478893821.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:21.576Z,1478893821.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:21.973Z,1478893821.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:22.289Z,1478893822.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:22.389Z,1478893822.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:22.712Z,1478893822.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:22.757Z,1478893822.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:23.150Z,1478893823.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:23.508Z,1478893823.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:23.552Z,1478893823.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:23.951Z,1478893823.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:24.305Z,1478893824.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:24.393Z,1478893824.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:24.717Z,1478893824.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:24.755Z,1478893824.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:25.166Z,1478893825.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:25.512Z,1478893825.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:25.568Z,1478893825.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:25.962Z,1478893825.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:26.309Z,1478893826.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:26.382Z,1478893826.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:26.720Z,1478893826.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:26.763Z,1478893826.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:27.159Z,1478893827.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:27.517Z,1478893827.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:27.557Z,1478893827.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:27.964Z,1478893827.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:28.312Z,1478893828.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:28.432Z,1478893828.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:28.745Z,1478893828.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:28.808Z,1478893828.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:29.147Z,1478893829.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:29.549Z,1478893829.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:29.604Z,1478893829.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:29.980Z,1478893829.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:30.378Z,1478893830.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:30.400Z,1478893830.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:30.835Z,1478893830.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:31.148Z,1478893831.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:31.205Z,1478893831.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:31.552Z,1478893831.552 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T19:50:31.553Z,1478893831.553 [BPC1] Data Fault, FailCount= 1
2016-11-11T19:50:31.553Z,1478893831.553 [BPC1](ERROR): Data Fault
2016-11-11T19:50:31.561Z,1478893831.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:31.601Z,1478893831.602 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T19:50:31.944Z,1478893831.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:31.960Z,1478893831.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:32.361Z,1478893832.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:32.741Z,1478893832.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:32.834Z,1478893832.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:32.870Z,1478893832.870 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:50:32.870Z,1478893832.870 [BPC1] No Fault, FailCount= 1
2016-11-11T19:50:33.192Z,1478893833.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:33.213Z,1478893833.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:33.570Z,1478893833.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:33.971Z,1478893833.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:33.996Z,1478893833.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:34.358Z,1478893834.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:34.676Z,1478893834.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:34.762Z,1478893834.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:35.167Z,1478893835.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:35.474Z,1478893835.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:35.568Z,1478893835.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:35.952Z,1478893835.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:36.269Z,1478893836.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:36.354Z,1478893836.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:36.684Z,1478893836.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:36.776Z,1478893836.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:37.169Z,1478893837.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:37.480Z,1478893837.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:37.557Z,1478893837.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:37.949Z,1478893837.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:38.277Z,1478893838.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:38.366Z,1478893838.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:38.688Z,1478893838.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:38.756Z,1478893838.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:39.152Z,1478893839.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:39.484Z,1478893839.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:39.551Z,1478893839.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:39.964Z,1478893839.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:40.286Z,1478893840.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:40.368Z,1478893840.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:40.758Z,1478893840.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:40.760Z,1478893840.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:41.154Z,1478893841.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:41.556Z,1478893841.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:41.568Z,1478893841.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:41.962Z,1478893841.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:42.353Z,1478893842.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:42.421Z,1478893842.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:42.746Z,1478893842.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:42.800Z,1478893842.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:43.149Z,1478893843.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:43.554Z,1478893843.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:43.596Z,1478893843.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:43.959Z,1478893843.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:44.362Z,1478893844.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:44.392Z,1478893844.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:44.797Z,1478893844.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:45.166Z,1478893845.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:45.168Z,1478893845.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:45.613Z,1478893845.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:45.964Z,1478893845.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:45.997Z,1478893845.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:46.374Z,1478893846.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:46.760Z,1478893846.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:46.825Z,1478893846.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:47.155Z,1478893847.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:47.168Z,1478893847.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:47.590Z,1478893847.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:47.964Z,1478893847.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:47.993Z,1478893847.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:48.353Z,1478893848.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:48.652Z,1478893848.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:48.752Z,1478893848.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:49.153Z,1478893849.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:49.448Z,1478893849.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:49.557Z,1478893849.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:49.969Z,1478893849.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:50.245Z,1478893850.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:50.370Z,1478893850.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:50.656Z,1478893850.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:50.756Z,1478893850.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:51.157Z,1478893851.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:51.452Z,1478893851.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:51.557Z,1478893851.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:51.961Z,1478893851.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:52.249Z,1478893852.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:52.345Z,1478893852.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:52.684Z,1478893852.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:52.744Z,1478893852.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:53.144Z,1478893853.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:53.480Z,1478893853.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:53.550Z,1478893853.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:53.954Z,1478893853.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:54.276Z,1478893854.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:54.389Z,1478893854.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:54.684Z,1478893854.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:54.761Z,1478893854.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:55.148Z,1478893855.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:55.480Z,1478893855.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:55.554Z,1478893855.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:55.952Z,1478893855.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:56.279Z,1478893856.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:56.405Z,1478893856.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:56.762Z,1478893856.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:56.788Z,1478893856.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:57.166Z,1478893857.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:57.541Z,1478893857.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:57.584Z,1478893857.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:57.974Z,1478893857.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:58.349Z,1478893858.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:58.380Z,1478893858.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:58.789Z,1478893858.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:59.112Z,1478893859.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:50:59.173Z,1478893859.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:50:59.909Z,1478893859.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:00.705Z,1478893860.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:01.120Z,1478893861.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:01.916Z,1478893861.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:02.669Z,1478893862.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:02.841Z,1478893862.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:02.981Z,1478893862.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:03.346Z,1478893863.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:03.464Z,1478893863.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:03.778Z,1478893863.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:04.137Z,1478893864.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:04.261Z,1478893864.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:04.593Z,1478893864.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:04.672Z,1478893864.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:04.949Z,1478893864.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:05.366Z,1478893865.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:05.468Z,1478893865.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:05.752Z,1478893865.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:06.137Z,1478893866.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:06.264Z,1478893866.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:06.537Z,1478893866.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:06.672Z,1478893866.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:06.971Z,1478893866.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:07.346Z,1478893867.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:07.468Z,1478893867.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:07.739Z,1478893867.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:08.143Z,1478893868.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:08.264Z,1478893868.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:08.555Z,1478893868.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:08.672Z,1478893868.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:08.948Z,1478893868.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:09.346Z,1478893869.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:09.468Z,1478893869.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:09.737Z,1478893869.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:10.137Z,1478893870.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:10.264Z,1478893870.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:10.537Z,1478893870.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:10.728Z,1478893870.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:10.939Z,1478893870.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:11.351Z,1478893871.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:11.524Z,1478893871.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:11.751Z,1478893871.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:12.140Z,1478893872.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:12.320Z,1478893872.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:12.547Z,1478893872.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:12.948Z,1478893872.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:13.088Z,1478893873.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:13.343Z,1478893873.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:13.748Z,1478893873.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:13.884Z,1478893873.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:14.142Z,1478893874.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:14.551Z,1478893874.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:14.681Z,1478893874.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:14.950Z,1478893874.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:15.092Z,1478893875.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:15.353Z,1478893875.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:15.761Z,1478893875.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:15.890Z,1478893875.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:16.137Z,1478893876.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:16.549Z,1478893876.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:16.620Z,1478893876.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:16.940Z,1478893876.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:17.377Z,1478893877.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:17.416Z,1478893877.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:17.769Z,1478893877.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:18.149Z,1478893878.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:18.213Z,1478893878.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:18.537Z,1478893878.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:18.640Z,1478893878.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:18.985Z,1478893878.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:19.345Z,1478893879.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:19.436Z,1478893879.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:19.783Z,1478893879.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:20.151Z,1478893880.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:20.233Z,1478893880.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:20.566Z,1478893880.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:20.644Z,1478893880.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:20.942Z,1478893880.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:21.350Z,1478893881.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:21.440Z,1478893881.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:21.754Z,1478893881.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:22.157Z,1478893882.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:22.241Z,1478893882.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:22.548Z,1478893882.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:22.648Z,1478893882.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:22.945Z,1478893882.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:23.341Z,1478893883.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:23.444Z,1478893883.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:23.748Z,1478893883.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:24.156Z,1478893884.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:24.240Z,1478893884.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:24.552Z,1478893884.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:24.716Z,1478893884.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:24.964Z,1478893884.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:25.355Z,1478893885.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:25.512Z,1478893885.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:25.737Z,1478893885.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:26.139Z,1478893886.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:26.308Z,1478893886.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:26.545Z,1478893886.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:26.941Z,1478893886.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:27.060Z,1478893887.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:27.342Z,1478893887.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:27.749Z,1478893887.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:27.856Z,1478893887.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:28.152Z,1478893888.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:28.553Z,1478893888.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:28.653Z,1478893888.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:28.969Z,1478893888.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:29.064Z,1478893889.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:29.336Z,1478893889.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:29.740Z,1478893889.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:29.860Z,1478893889.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:30.145Z,1478893890.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:30.548Z,1478893890.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:30.620Z,1478893890.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:30.948Z,1478893890.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:31.349Z,1478893891.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:31.416Z,1478893891.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:31.749Z,1478893891.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:32.194Z,1478893892.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:32.212Z,1478893892.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:32.578Z,1478893892.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:32.620Z,1478893892.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:32.940Z,1478893892.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:33.377Z,1478893893.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:33.416Z,1478893893.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:33.738Z,1478893893.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:34.102Z,1478893894.102 [NAL9602](INFO): SBD MO Status=2, MOMSN=357, MT Status=2, MTMSN=0
2016-11-11T19:51:34.102Z,1478893894.102 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T19:51:34.210Z,1478893894.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:34.212Z,1478893894.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:34.563Z,1478893894.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:34.620Z,1478893894.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:34.971Z,1478893894.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:35.349Z,1478893895.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:35.416Z,1478893895.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:35.749Z,1478893895.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:36.177Z,1478893896.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:36.213Z,1478893896.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:36.545Z,1478893896.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:36.624Z,1478893896.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:36.945Z,1478893896.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:37.339Z,1478893897.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:37.420Z,1478893897.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:37.749Z,1478893897.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:38.148Z,1478893898.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:38.216Z,1478893898.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:38.561Z,1478893898.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:38.684Z,1478893898.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:38.961Z,1478893898.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:39.336Z,1478893899.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:39.480Z,1478893899.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:39.740Z,1478893899.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:40.141Z,1478893900.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:40.276Z,1478893900.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:40.553Z,1478893900.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:40.997Z,1478893900.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:41.060Z,1478893901.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:41.361Z,1478893901.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:41.753Z,1478893901.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:41.856Z,1478893901.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:42.153Z,1478893902.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:42.557Z,1478893902.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:42.652Z,1478893902.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:42.962Z,1478893902.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:43.064Z,1478893903.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:43.345Z,1478893903.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:43.745Z,1478893903.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:43.860Z,1478893903.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:44.206Z,1478893904.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:44.561Z,1478893904.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:44.572Z,1478893904.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:44.946Z,1478893904.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:45.357Z,1478893905.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:45.369Z,1478893905.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:45.761Z,1478893905.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:46.164Z,1478893906.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:46.223Z,1478893906.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:46.578Z,1478893906.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:46.612Z,1478893906.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:47.011Z,1478893907.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:47.378Z,1478893907.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:47.408Z,1478893907.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:47.806Z,1478893907.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:48.206Z,1478893908.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:48.226Z,1478893908.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:48.590Z,1478893908.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:48.616Z,1478893908.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:48.978Z,1478893908.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:49.393Z,1478893909.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:49.412Z,1478893909.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:49.770Z,1478893909.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:50.195Z,1478893910.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:50.195Z,1478893910.195 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 280
2016-11-11T19:51:50.195Z,1478893910.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:51:50.212Z,1478893910.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:50.252Z,1478893910.252 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:50.252Z,1478893910.252 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 280
2016-11-11T19:51:50.252Z,1478893910.252 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:51:50.254Z,1478893910.254 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:50.254Z,1478893910.254 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 280
2016-11-11T19:51:50.254Z,1478893910.254 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:51:50.302Z,1478893910.302 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:51:50.302Z,1478893910.302 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:51:50.302Z,1478893910.302 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:51:50.620Z,1478893910.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:50.629Z,1478893910.629 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:51:50.629Z,1478893910.629 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 280
2016-11-11T19:51:50.630Z,1478893910.630 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:51:50.630Z,1478893910.630 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 280
2016-11-11T19:51:50.631Z,1478893910.631 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:51:50.631Z,1478893910.631 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 280
2016-11-11T19:51:50.952Z,1478893910.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:51:50.952Z,1478893910.952 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:51:50.953Z,1478893910.953 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:51:50.990Z,1478893910.990 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:51:50.991Z,1478893910.991 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:51:51.015Z,1478893911.015 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:51:51.016Z,1478893911.016 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:51:51.016Z,1478893911.016 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:51:51.017Z,1478893911.017 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:51:51.389Z,1478893911.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:51.416Z,1478893911.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:51.781Z,1478893911.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:52.167Z,1478893912.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:52.212Z,1478893912.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:52.586Z,1478893912.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:52.961Z,1478893912.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:52.995Z,1478893912.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:53.382Z,1478893913.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:53.756Z,1478893913.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:53.778Z,1478893913.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:54.191Z,1478893914.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:54.552Z,1478893914.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:54.593Z,1478893914.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:54.990Z,1478893914.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:55.052Z,1478893915.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:55.382Z,1478893915.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:55.755Z,1478893915.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:55.848Z,1478893915.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:56.172Z,1478893916.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:56.621Z,1478893916.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:56.644Z,1478893916.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:56.989Z,1478893916.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:57.052Z,1478893917.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:57.423Z,1478893917.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:57.762Z,1478893917.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:57.848Z,1478893917.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:58.284Z,1478893918.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:58.573Z,1478893918.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:51:58.590Z,1478893918.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:58.957Z,1478893918.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:59.338Z,1478893919.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:51:59.368Z,1478893919.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:00.165Z,1478893920.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:00.576Z,1478893920.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:01.372Z,1478893921.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:02.168Z,1478893922.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:02.576Z,1478893922.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:03.373Z,1478893923.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:04.168Z,1478893924.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:04.576Z,1478893924.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:05.372Z,1478893925.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:06.168Z,1478893926.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:06.668Z,1478893926.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:07.464Z,1478893927.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:08.260Z,1478893928.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:09.024Z,1478893929.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:09.665Z,1478893929.665 [NAL9602](INFO): SBD MO Status=2, MOMSN=357, MT Status=2, MTMSN=0
2016-11-11T19:52:09.665Z,1478893929.665 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T19:52:09.703Z,1478893929.703 [BPC1](ERROR): Failed to receive battery data
2016-11-11T19:52:09.703Z,1478893929.703 [BPC1] Communications Fault, FailCount= 1
2016-11-11T19:52:09.727Z,1478893929.727 [BPC1](ERROR): Communications Fault
2016-11-11T19:52:09.752Z,1478893929.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:09.794Z,1478893929.794 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T19:52:09.820Z,1478893929.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:09.913Z,1478893929.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:10.262Z,1478893930.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:10.617Z,1478893930.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:10.689Z,1478893930.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:10.753Z,1478893930.753 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:52:10.753Z,1478893930.753 [BPC1] No Fault, FailCount= 1
2016-11-11T19:52:11.116Z,1478893931.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:11.130Z,1478893931.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:11.482Z,1478893931.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:11.864Z,1478893931.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:11.912Z,1478893931.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:12.282Z,1478893932.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:12.525Z,1478893932.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:12.689Z,1478893932.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:13.061Z,1478893933.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:13.320Z,1478893933.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:13.466Z,1478893933.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:13.861Z,1478893933.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:14.117Z,1478893934.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:14.257Z,1478893934.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:14.653Z,1478893934.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:14.912Z,1478893934.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:15.057Z,1478893935.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:15.481Z,1478893935.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:15.708Z,1478893935.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:15.857Z,1478893935.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:16.257Z,1478893936.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:16.504Z,1478893936.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:16.662Z,1478893936.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:17.063Z,1478893937.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:17.300Z,1478893937.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:17.453Z,1478893937.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:17.852Z,1478893937.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:18.096Z,1478893938.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:18.253Z,1478893938.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:18.657Z,1478893938.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:18.936Z,1478893938.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:19.057Z,1478893939.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:19.457Z,1478893939.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:19.732Z,1478893939.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:19.853Z,1478893939.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:20.256Z,1478893940.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:20.528Z,1478893940.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:20.660Z,1478893940.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:21.069Z,1478893941.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:21.324Z,1478893941.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:21.475Z,1478893941.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:21.867Z,1478893941.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:22.120Z,1478893942.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:22.263Z,1478893942.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:22.653Z,1478893942.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:22.916Z,1478893942.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:23.075Z,1478893943.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:23.475Z,1478893943.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:23.712Z,1478893943.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:23.853Z,1478893943.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:24.281Z,1478893944.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:24.508Z,1478893944.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:24.657Z,1478893944.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:25.080Z,1478893945.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:25.305Z,1478893945.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:25.505Z,1478893945.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:25.887Z,1478893945.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:26.100Z,1478893946.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:26.262Z,1478893946.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:26.789Z,1478893946.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:26.896Z,1478893946.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:27.077Z,1478893947.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:27.453Z,1478893947.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:27.692Z,1478893947.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:27.853Z,1478893947.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:28.257Z,1478893948.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:28.488Z,1478893948.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:28.650Z,1478893948.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:29.058Z,1478893949.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:29.284Z,1478893949.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:29.462Z,1478893949.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:29.852Z,1478893949.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:30.080Z,1478893950.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:30.253Z,1478893950.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:30.657Z,1478893950.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:30.876Z,1478893950.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:31.077Z,1478893951.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:31.463Z,1478893951.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:31.672Z,1478893951.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:31.852Z,1478893951.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:32.252Z,1478893952.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:32.468Z,1478893952.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:32.672Z,1478893952.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:33.053Z,1478893953.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:33.264Z,1478893953.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:33.453Z,1478893953.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:33.853Z,1478893953.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:34.060Z,1478893954.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:34.257Z,1478893954.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:34.648Z,1478893954.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:34.856Z,1478893954.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:35.057Z,1478893955.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:35.517Z,1478893955.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:35.652Z,1478893955.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:35.872Z,1478893955.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:36.101Z,1478893956.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:36.290Z,1478893956.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:36.508Z,1478893956.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:36.698Z,1478893956.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:36.920Z,1478893956.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:37.065Z,1478893957.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:37.328Z,1478893957.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:37.513Z,1478893957.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:37.736Z,1478893957.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:37.866Z,1478893957.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:38.144Z,1478893958.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:38.265Z,1478893958.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:38.553Z,1478893958.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:38.702Z,1478893958.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:38.964Z,1478893958.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:39.080Z,1478893959.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:39.372Z,1478893959.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:39.477Z,1478893959.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:39.780Z,1478893959.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:39.886Z,1478893959.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:40.188Z,1478893960.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:40.278Z,1478893960.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:40.596Z,1478893960.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:40.671Z,1478893960.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:41.004Z,1478893961.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:41.054Z,1478893961.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:41.452Z,1478893961.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:41.488Z,1478893961.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:41.908Z,1478893961.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:42.248Z,1478893962.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:42.285Z,1478893962.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:42.656Z,1478893962.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:42.663Z,1478893962.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:43.065Z,1478893963.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:43.452Z,1478893963.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:43.461Z,1478893963.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:43.878Z,1478893963.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:44.248Z,1478893964.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:44.273Z,1478893964.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:44.656Z,1478893964.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:44.678Z,1478893964.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:45.106Z,1478893965.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:45.452Z,1478893965.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:45.489Z,1478893965.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:45.858Z,1478893965.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:46.248Z,1478893966.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:46.278Z,1478893966.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:46.618Z,1478893966.618 [NAL9602](INFO): SBD MO Status=2, MOMSN=357, MT Status=2, MTMSN=0
2016-11-11T19:52:46.618Z,1478893966.618 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T19:52:46.656Z,1478893966.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:46.672Z,1478893966.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:47.065Z,1478893967.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:47.452Z,1478893967.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:47.462Z,1478893967.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:47.873Z,1478893967.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:48.248Z,1478893968.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:48.265Z,1478893968.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:48.656Z,1478893968.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:48.661Z,1478893968.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:49.061Z,1478893969.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:49.452Z,1478893969.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:49.458Z,1478893969.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:49.861Z,1478893969.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:50.248Z,1478893970.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:50.256Z,1478893970.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:50.659Z,1478893970.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:50.920Z,1478893970.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:51.071Z,1478893971.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:51.517Z,1478893971.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:51.716Z,1478893971.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:51.858Z,1478893971.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:52.293Z,1478893972.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:52.513Z,1478893972.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:52.648Z,1478893972.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:52.924Z,1478893972.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:53.057Z,1478893973.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:53.489Z,1478893973.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:53.720Z,1478893973.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:53.855Z,1478893973.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:54.289Z,1478893974.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:54.448Z,1478893974.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:54.697Z,1478893974.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:55.055Z,1478893975.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:55.244Z,1478893975.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:55.464Z,1478893975.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:55.860Z,1478893975.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:56.041Z,1478893976.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:56.275Z,1478893976.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:56.452Z,1478893976.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:56.658Z,1478893976.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:57.058Z,1478893977.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:57.248Z,1478893977.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:57.467Z,1478893977.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:57.858Z,1478893977.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:58.045Z,1478893978.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:58.264Z,1478893978.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:58.456Z,1478893978.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:58.667Z,1478893978.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:58.676Z,1478893978.676 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T19:47:58.5Z
2016-11-11T19:52:58.676Z,1478893978.676 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T19:52:58.676Z,1478893978.676 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T19:52:59.061Z,1478893979.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:52:59.252Z,1478893979.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:52:59.909Z,1478893979.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:00.049Z,1478893980.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:00.460Z,1478893980.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:01.256Z,1478893981.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:02.052Z,1478893982.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:02.540Z,1478893982.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:03.160Z,1478893983.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:03.214Z,1478893983.214 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0348.lzma
2016-11-11T19:53:03.288Z,1478893983.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:03.336Z,1478893983.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:03.674Z,1478893983.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:04.132Z,1478893984.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:04.140Z,1478893984.140 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0348.lzma.bak
2016-11-11T19:53:04.141Z,1478893984.141 [DataOverHttps](INFO): SBD MOMSN=4555708
2016-11-11T19:53:04.220Z,1478893984.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:04.892Z,1478893984.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:05.440Z,1478893985.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:05.585Z,1478893985.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:05.688Z,1478893985.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:06.485Z,1478893986.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:06.896Z,1478893986.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:07.692Z,1478893987.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:08.416Z,1478893988.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:09.059Z,1478893989.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:09.212Z,1478893989.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:09.214Z,1478893989.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:09.583Z,1478893989.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:10.009Z,1478893990.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:10.047Z,1478893990.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:10.381Z,1478893990.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:10.420Z,1478893990.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:10.805Z,1478893990.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:11.216Z,1478893991.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:12.013Z,1478893992.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:12.424Z,1478893992.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:13.220Z,1478893993.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:14.017Z,1478893994.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:14.258Z,1478893994.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:14.289Z,1478893994.289 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0349.lzma
2016-11-11T19:53:14.410Z,1478893994.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:14.432Z,1478893994.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:14.744Z,1478893994.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:15.090Z,1478893995.089 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0349.lzma.bak
2016-11-11T19:53:15.090Z,1478893995.090 [DataOverHttps](INFO): SBD MOMSN=4555710
2016-11-11T19:53:15.161Z,1478893995.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:15.228Z,1478893995.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:16.029Z,1478893996.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:16.505Z,1478893996.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:16.535Z,1478893996.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:16.544Z,1478893996.544 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T19:53:16.544Z,1478893996.544 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T19:53:16.544Z,1478893996.544 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T19:53:16.670Z,1478893996.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:17.300Z,1478893997.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:18.096Z,1478893998.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:18.868Z,1478893998.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:19.664Z,1478893999.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:20.075Z,1478894000.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:20.233Z,1478894000.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:20.461Z,1478894000.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:20.609Z,1478894000.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:20.908Z,1478894000.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:20.975Z,1478894000.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:21.371Z,1478894001.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:21.704Z,1478894001.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:21.773Z,1478894001.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:22.178Z,1478894002.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:22.384Z,1478894002.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:22.569Z,1478894002.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:22.975Z,1478894002.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:23.180Z,1478894003.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:23.369Z,1478894003.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:23.773Z,1478894003.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:23.976Z,1478894003.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:24.176Z,1478894004.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:24.388Z,1478894004.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:24.589Z,1478894004.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:24.988Z,1478894004.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:25.184Z,1478894005.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:25.391Z,1478894005.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:25.785Z,1478894005.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:25.981Z,1478894005.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:26.237Z,1478894006.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:26.396Z,1478894006.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:26.580Z,1478894006.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:26.990Z,1478894006.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:27.192Z,1478894007.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:27.380Z,1478894007.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:27.797Z,1478894007.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:27.989Z,1478894007.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:28.201Z,1478894008.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:28.400Z,1478894008.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:28.580Z,1478894008.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:28.980Z,1478894008.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:29.196Z,1478894009.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:29.385Z,1478894009.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:29.782Z,1478894009.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:29.992Z,1478894009.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:30.181Z,1478894010.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:30.480Z,1478894010.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:30.584Z,1478894010.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:30.973Z,1478894010.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:31.276Z,1478894011.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:31.384Z,1478894011.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:31.788Z,1478894011.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:32.072Z,1478894012.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:32.177Z,1478894012.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:32.577Z,1478894012.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:32.844Z,1478894012.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:32.969Z,1478894012.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:33.375Z,1478894013.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:33.640Z,1478894013.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:33.729Z,1478894013.729 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T19:53:33.780Z,1478894013.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:34.171Z,1478894014.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:34.436Z,1478894014.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:34.569Z,1478894014.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:34.850Z,1478894014.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:34.974Z,1478894014.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:35.381Z,1478894015.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:35.644Z,1478894015.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:35.776Z,1478894015.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:36.177Z,1478894016.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:36.364Z,1478894016.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:36.578Z,1478894016.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:36.981Z,1478894016.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:37.160Z,1478894017.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:37.380Z,1478894017.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:37.784Z,1478894017.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:37.957Z,1478894017.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:38.189Z,1478894018.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:38.372Z,1478894018.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:38.581Z,1478894018.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:38.982Z,1478894018.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:39.168Z,1478894019.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:39.328Z,1478894019.328 [NAL9602](INFO): Powering down
2016-11-11T19:53:39.383Z,1478894019.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:39.785Z,1478894019.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:39.965Z,1478894019.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:40.209Z,1478894020.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:40.384Z,1478894020.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:40.566Z,1478894020.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:40.964Z,1478894020.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:41.180Z,1478894021.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:41.369Z,1478894021.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:41.763Z,1478894021.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:41.977Z,1478894021.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:42.172Z,1478894022.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:42.392Z,1478894022.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:42.573Z,1478894022.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:42.986Z,1478894022.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:43.188Z,1478894023.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:43.360Z,1478894023.360 [BPC1](ERROR): Failed to receive battery data
2016-11-11T19:53:43.360Z,1478894023.360 [BPC1] Communications Fault, FailCount= 1
2016-11-11T19:53:43.360Z,1478894023.360 [BPC1](ERROR): Communications Fault
2016-11-11T19:53:43.373Z,1478894023.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:43.424Z,1478894023.424 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T19:53:43.773Z,1478894023.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:43.984Z,1478894023.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:44.175Z,1478894024.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:44.464Z,1478894024.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:44.581Z,1478894024.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:44.621Z,1478894024.621 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:53:44.621Z,1478894024.621 [BPC1] No Fault, FailCount= 1
2016-11-11T19:53:45.018Z,1478894025.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:45.260Z,1478894025.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:45.401Z,1478894025.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:45.779Z,1478894025.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:46.056Z,1478894026.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:46.181Z,1478894026.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:46.580Z,1478894026.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:46.812Z,1478894026.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:46.979Z,1478894026.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:47.380Z,1478894027.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:47.610Z,1478894027.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:47.781Z,1478894027.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:48.181Z,1478894028.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:48.405Z,1478894028.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:48.580Z,1478894028.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:48.816Z,1478894028.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:48.982Z,1478894028.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:49.380Z,1478894029.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:49.613Z,1478894029.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:49.780Z,1478894029.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:50.179Z,1478894030.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:50.340Z,1478894030.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:50.605Z,1478894030.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:50.987Z,1478894030.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:51.136Z,1478894031.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:51.360Z,1478894031.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:51.793Z,1478894031.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:51.933Z,1478894031.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:52.165Z,1478894032.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:52.344Z,1478894032.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:52.605Z,1478894032.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:53.005Z,1478894033.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:53.140Z,1478894033.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:53.389Z,1478894033.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:53.784Z,1478894033.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:53.937Z,1478894033.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:54.184Z,1478894034.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:54.348Z,1478894034.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:54.567Z,1478894034.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:54.965Z,1478894034.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:55.144Z,1478894035.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:55.363Z,1478894035.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:55.764Z,1478894035.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:55.940Z,1478894035.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:56.177Z,1478894036.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:56.559Z,1478894036.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:56.736Z,1478894036.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:56.964Z,1478894036.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:57.360Z,1478894037.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:57.532Z,1478894037.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:57.769Z,1478894037.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:58.160Z,1478894038.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:58.328Z,1478894038.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:58.564Z,1478894038.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:58.965Z,1478894038.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:59.124Z,1478894039.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:53:59.369Z,1478894039.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:59.760Z,1478894039.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:53:59.920Z,1478894039.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:00.169Z,1478894040.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:00.605Z,1478894040.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:00.716Z,1478894040.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:00.965Z,1478894040.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:01.369Z,1478894041.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:01.512Z,1478894041.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:01.765Z,1478894041.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:02.164Z,1478894042.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:02.308Z,1478894042.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:02.561Z,1478894042.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:02.964Z,1478894042.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:03.104Z,1478894043.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:03.364Z,1478894043.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:03.793Z,1478894043.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:03.900Z,1478894043.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:04.165Z,1478894044.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:04.564Z,1478894044.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:04.696Z,1478894044.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:05.046Z,1478894045.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:05.382Z,1478894045.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:05.492Z,1478894045.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:05.764Z,1478894045.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:06.193Z,1478894046.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:06.288Z,1478894046.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:06.564Z,1478894046.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:06.989Z,1478894046.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:07.084Z,1478894047.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:07.397Z,1478894047.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:07.760Z,1478894047.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:07.880Z,1478894047.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:08.169Z,1478894048.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:08.568Z,1478894048.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:08.676Z,1478894048.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:08.964Z,1478894048.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:09.364Z,1478894049.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:09.472Z,1478894049.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:09.765Z,1478894049.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:10.164Z,1478894050.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:10.268Z,1478894050.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:10.560Z,1478894050.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:10.969Z,1478894050.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:11.064Z,1478894051.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:11.365Z,1478894051.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:11.764Z,1478894051.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:11.860Z,1478894051.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:12.227Z,1478894052.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:12.560Z,1478894052.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:12.584Z,1478894052.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:12.968Z,1478894052.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:12.977Z,1478894052.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:13.373Z,1478894053.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:13.376Z,1478894053.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:13.780Z,1478894053.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:13.784Z,1478894053.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:14.173Z,1478894054.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:14.192Z,1478894054.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:14.581Z,1478894054.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:14.600Z,1478894054.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:14.977Z,1478894054.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:15.008Z,1478894055.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:15.377Z,1478894055.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:15.416Z,1478894055.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:15.762Z,1478894055.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:15.824Z,1478894055.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:16.181Z,1478894056.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:16.232Z,1478894056.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:16.573Z,1478894056.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:16.780Z,1478894056.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:16.978Z,1478894056.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:17.576Z,1478894057.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:18.312Z,1478894058.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:19.108Z,1478894059.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:19.905Z,1478894059.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:20.316Z,1478894060.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:20.653Z,1478894060.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:20.779Z,1478894060.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:21.112Z,1478894061.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:21.154Z,1478894061.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:21.567Z,1478894061.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:21.909Z,1478894061.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:21.997Z,1478894061.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:22.322Z,1478894062.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:22.370Z,1478894062.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:22.786Z,1478894062.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:23.116Z,1478894063.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:23.185Z,1478894063.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:23.555Z,1478894063.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:23.912Z,1478894063.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:23.978Z,1478894063.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:24.324Z,1478894064.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:24.361Z,1478894064.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:24.757Z,1478894064.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:25.120Z,1478894065.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:25.158Z,1478894065.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:25.553Z,1478894065.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:25.917Z,1478894065.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:26.032Z,1478894066.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:26.352Z,1478894066.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:26.388Z,1478894066.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:26.753Z,1478894066.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:27.161Z,1478894067.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:27.184Z,1478894067.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:27.560Z,1478894067.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:27.953Z,1478894067.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:27.980Z,1478894067.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:28.410Z,1478894068.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:28.748Z,1478894068.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:28.767Z,1478894068.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:29.164Z,1478894069.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:29.544Z,1478894069.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:29.562Z,1478894069.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:29.972Z,1478894069.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:30.341Z,1478894070.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:30.410Z,1478894070.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:30.752Z,1478894070.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:30.753Z,1478894070.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:31.152Z,1478894071.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:31.548Z,1478894071.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:31.552Z,1478894071.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:31.970Z,1478894071.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:32.276Z,1478894072.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:32.356Z,1478894072.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:32.756Z,1478894072.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:33.072Z,1478894073.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:33.162Z,1478894073.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:33.558Z,1478894073.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:33.869Z,1478894073.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:34.005Z,1478894074.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:34.280Z,1478894074.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:34.357Z,1478894074.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:34.757Z,1478894074.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:35.076Z,1478894075.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:35.161Z,1478894075.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:35.574Z,1478894075.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:35.873Z,1478894075.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:35.959Z,1478894075.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:36.284Z,1478894076.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:36.364Z,1478894076.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:36.789Z,1478894076.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:37.080Z,1478894077.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:37.152Z,1478894077.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:37.577Z,1478894077.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:37.877Z,1478894077.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:37.981Z,1478894077.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:38.288Z,1478894078.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:38.363Z,1478894078.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:38.747Z,1478894078.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:39.084Z,1478894079.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:39.163Z,1478894079.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:39.557Z,1478894079.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:39.880Z,1478894079.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:40.012Z,1478894080.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:40.359Z,1478894080.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:40.384Z,1478894080.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:40.762Z,1478894080.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:41.160Z,1478894081.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:41.180Z,1478894081.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:41.564Z,1478894081.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:41.972Z,1478894081.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:41.976Z,1478894081.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:42.416Z,1478894082.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:42.736Z,1478894082.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:42.769Z,1478894082.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:43.172Z,1478894083.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:43.532Z,1478894083.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:43.549Z,1478894083.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:43.961Z,1478894083.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:44.328Z,1478894084.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:44.405Z,1478894084.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:44.740Z,1478894084.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:44.756Z,1478894084.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:45.158Z,1478894085.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:45.536Z,1478894085.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:45.567Z,1478894085.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:45.960Z,1478894085.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:46.264Z,1478894086.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:46.365Z,1478894086.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:46.749Z,1478894086.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:47.062Z,1478894087.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:47.152Z,1478894087.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:47.551Z,1478894087.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:47.865Z,1478894087.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:47.958Z,1478894087.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:48.284Z,1478894088.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:48.356Z,1478894088.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:48.801Z,1478894088.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:49.081Z,1478894089.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:49.164Z,1478894089.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:49.555Z,1478894089.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:49.877Z,1478894089.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:49.977Z,1478894089.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:50.288Z,1478894090.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:50.364Z,1478894090.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:50.760Z,1478894090.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:51.085Z,1478894091.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:51.181Z,1478894091.181 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:51.181Z,1478894091.181 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 281
2016-11-11T19:54:51.181Z,1478894091.181 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:54:51.188Z,1478894091.188 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:51.188Z,1478894091.188 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 281
2016-11-11T19:54:51.188Z,1478894091.188 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:54:51.190Z,1478894091.190 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:51.190Z,1478894091.190 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 281
2016-11-11T19:54:51.190Z,1478894091.190 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:54:51.255Z,1478894091.255 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:54:51.255Z,1478894091.255 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:54:51.256Z,1478894091.256 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:54:51.585Z,1478894091.585 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:54:51.585Z,1478894091.585 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 281
2016-11-11T19:54:51.586Z,1478894091.586 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:54:51.586Z,1478894091.586 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 281
2016-11-11T19:54:51.586Z,1478894091.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:54:51.586Z,1478894091.586 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 281
2016-11-11T19:54:51.880Z,1478894091.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:51.988Z,1478894091.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:54:51.988Z,1478894091.988 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:54:51.989Z,1478894091.989 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:54:51.993Z,1478894091.993 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:54:51.994Z,1478894091.994 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:54:51.994Z,1478894091.994 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:54:51.995Z,1478894091.995 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:54:51.995Z,1478894091.995 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:54:51.996Z,1478894091.996 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:54:52.288Z,1478894092.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:52.379Z,1478894092.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:52.757Z,1478894092.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:53.084Z,1478894093.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:53.144Z,1478894093.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:53.549Z,1478894093.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:53.880Z,1478894093.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:54.032Z,1478894094.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:54.347Z,1478894094.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:54.400Z,1478894094.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:54.757Z,1478894094.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:55.150Z,1478894095.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:55.196Z,1478894095.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:55.551Z,1478894095.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:55.955Z,1478894095.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:55.992Z,1478894095.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:56.376Z,1478894096.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:56.750Z,1478894096.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:56.772Z,1478894096.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:57.151Z,1478894097.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:57.557Z,1478894097.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:57.568Z,1478894097.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:57.957Z,1478894097.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:58.364Z,1478894098.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:58.373Z,1478894098.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:58.753Z,1478894098.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:58.772Z,1478894098.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:59.160Z,1478894099.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:59.561Z,1478894099.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:54:59.568Z,1478894099.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:54:59.964Z,1478894099.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:00.236Z,1478894100.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:00.364Z,1478894100.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:00.765Z,1478894100.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:01.032Z,1478894101.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:01.171Z,1478894101.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:01.565Z,1478894101.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:01.828Z,1478894101.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:01.970Z,1478894101.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:02.244Z,1478894102.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:02.350Z,1478894102.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:02.749Z,1478894102.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:03.040Z,1478894103.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:03.185Z,1478894103.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:03.557Z,1478894103.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:03.837Z,1478894103.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:03.961Z,1478894103.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:04.248Z,1478894104.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:04.393Z,1478894104.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:04.757Z,1478894104.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:05.044Z,1478894105.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:05.152Z,1478894105.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:05.590Z,1478894105.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:05.841Z,1478894105.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:05.954Z,1478894105.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:06.252Z,1478894106.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:06.389Z,1478894106.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:06.781Z,1478894106.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:07.048Z,1478894107.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:07.163Z,1478894107.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:07.558Z,1478894107.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:07.845Z,1478894107.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:07.992Z,1478894107.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:08.366Z,1478894108.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:08.384Z,1478894108.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:08.752Z,1478894108.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:09.146Z,1478894109.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:09.180Z,1478894109.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:09.550Z,1478894109.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:09.952Z,1478894109.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:09.976Z,1478894109.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:10.373Z,1478894110.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:10.688Z,1478894110.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:10.766Z,1478894110.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:11.152Z,1478894111.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:11.485Z,1478894111.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:11.562Z,1478894111.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:11.962Z,1478894111.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:12.281Z,1478894112.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:12.369Z,1478894112.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:12.692Z,1478894112.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:12.749Z,1478894112.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:13.146Z,1478894113.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:13.488Z,1478894113.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:13.553Z,1478894113.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:13.950Z,1478894113.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:14.212Z,1478894114.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:14.360Z,1478894114.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:14.751Z,1478894114.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:15.008Z,1478894115.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:15.157Z,1478894115.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:15.561Z,1478894115.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:15.805Z,1478894115.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:15.961Z,1478894115.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:16.216Z,1478894116.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:16.361Z,1478894116.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:16.764Z,1478894116.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:17.012Z,1478894117.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:17.164Z,1478894117.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:17.809Z,1478894117.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:18.220Z,1478894118.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:19.016Z,1478894119.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:19.813Z,1478894119.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:20.224Z,1478894120.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:20.661Z,1478894120.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:20.780Z,1478894120.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:21.020Z,1478894121.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:21.149Z,1478894121.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:21.578Z,1478894121.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:21.817Z,1478894121.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:21.981Z,1478894121.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:22.312Z,1478894122.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:22.370Z,1478894122.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:22.774Z,1478894122.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:23.110Z,1478894123.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:23.154Z,1478894123.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:23.555Z,1478894123.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:23.904Z,1478894123.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:23.952Z,1478894123.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:24.353Z,1478894124.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:24.664Z,1478894124.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:24.741Z,1478894124.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:25.141Z,1478894125.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:25.460Z,1478894125.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:25.541Z,1478894125.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:25.941Z,1478894125.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:26.257Z,1478894126.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:26.348Z,1478894126.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:26.668Z,1478894126.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:26.749Z,1478894126.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:27.149Z,1478894127.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:27.465Z,1478894127.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:27.544Z,1478894127.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:27.949Z,1478894127.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:28.192Z,1478894128.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:28.353Z,1478894128.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:28.749Z,1478894128.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:28.988Z,1478894128.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:29.144Z,1478894129.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:29.549Z,1478894129.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:29.785Z,1478894129.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:29.950Z,1478894129.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:30.196Z,1478894130.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:30.344Z,1478894130.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:30.753Z,1478894130.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:30.992Z,1478894130.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:31.153Z,1478894131.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:31.545Z,1478894131.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:31.789Z,1478894131.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:31.944Z,1478894131.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:32.200Z,1478894132.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:32.352Z,1478894132.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:32.744Z,1478894132.744 [BPC1](ERROR): Failed to parse message.
2016-11-11T19:55:32.745Z,1478894132.745 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T19:55:32.745Z,1478894132.745 [BPC1] Data Fault, FailCount= 1
2016-11-11T19:55:32.745Z,1478894132.745 [BPC1](ERROR): Data Fault
2016-11-11T19:55:32.753Z,1478894132.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:32.774Z,1478894132.774 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T19:55:32.996Z,1478894132.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:33.153Z,1478894133.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:33.545Z,1478894133.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:33.795Z,1478894133.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:33.949Z,1478894133.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:33.969Z,1478894133.969 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:55:33.970Z,1478894133.970 [BPC1] No Fault, FailCount= 1
2016-11-11T19:55:34.208Z,1478894134.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:34.401Z,1478894134.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:34.750Z,1478894134.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:35.005Z,1478894135.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:35.169Z,1478894135.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:35.555Z,1478894135.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:35.800Z,1478894135.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:35.966Z,1478894135.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:36.307Z,1478894136.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:36.336Z,1478894136.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:36.741Z,1478894136.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:37.104Z,1478894137.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:37.160Z,1478894137.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:37.545Z,1478894137.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:37.900Z,1478894137.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:37.945Z,1478894137.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:38.343Z,1478894138.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:38.644Z,1478894138.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:38.750Z,1478894138.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:39.149Z,1478894139.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:39.440Z,1478894139.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:39.546Z,1478894139.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:39.944Z,1478894139.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:40.237Z,1478894140.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:40.349Z,1478894140.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:40.648Z,1478894140.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:40.755Z,1478894140.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:41.146Z,1478894141.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:41.445Z,1478894141.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:41.541Z,1478894141.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:41.941Z,1478894141.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:42.172Z,1478894142.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:42.340Z,1478894142.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:42.743Z,1478894142.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:42.968Z,1478894142.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:43.156Z,1478894143.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:43.543Z,1478894143.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:43.765Z,1478894143.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:43.949Z,1478894143.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:44.180Z,1478894144.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:44.349Z,1478894144.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:44.749Z,1478894144.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:44.976Z,1478894144.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:45.149Z,1478894145.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:45.589Z,1478894145.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:45.773Z,1478894145.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:45.961Z,1478894145.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:46.184Z,1478894146.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:46.357Z,1478894146.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:46.747Z,1478894146.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:46.980Z,1478894146.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:47.144Z,1478894147.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:47.562Z,1478894147.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:47.777Z,1478894147.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:47.957Z,1478894147.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:48.204Z,1478894148.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:48.369Z,1478894148.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:48.752Z,1478894148.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:48.000Z,1478894149.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:49.173Z,1478894149.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:49.573Z,1478894149.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:49.796Z,1478894149.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:49.952Z,1478894149.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:50.272Z,1478894150.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:50.352Z,1478894150.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:50.742Z,1478894150.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:51.068Z,1478894151.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:51.153Z,1478894151.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:51.551Z,1478894151.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:51.864Z,1478894151.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:51.948Z,1478894151.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:52.343Z,1478894152.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:52.624Z,1478894152.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:52.753Z,1478894152.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:53.148Z,1478894153.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:53.420Z,1478894153.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:53.551Z,1478894153.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:53.954Z,1478894153.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:54.217Z,1478894154.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:54.344Z,1478894154.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:54.628Z,1478894154.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:54.754Z,1478894154.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:55.157Z,1478894155.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:55.425Z,1478894155.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:55.546Z,1478894155.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:55.949Z,1478894155.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:56.148Z,1478894156.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:56.354Z,1478894156.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:56.745Z,1478894156.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:56.944Z,1478894156.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:57.151Z,1478894157.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:57.546Z,1478894157.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:57.741Z,1478894157.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:57.957Z,1478894157.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:58.152Z,1478894158.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:58.352Z,1478894158.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:58.752Z,1478894158.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:58.948Z,1478894158.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:59.148Z,1478894159.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:59.556Z,1478894159.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:55:59.745Z,1478894159.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:55:59.958Z,1478894159.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:00.156Z,1478894160.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:00.356Z,1478894160.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:00.773Z,1478894160.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:00.952Z,1478894160.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:01.147Z,1478894161.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:01.539Z,1478894161.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:01.749Z,1478894161.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:01.949Z,1478894161.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:02.160Z,1478894162.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:02.349Z,1478894162.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:02.743Z,1478894162.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:02.956Z,1478894162.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:03.142Z,1478894163.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:03.542Z,1478894163.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:03.752Z,1478894163.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:03.943Z,1478894163.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:04.248Z,1478894164.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:04.342Z,1478894164.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:04.736Z,1478894164.736 [BPC1](ERROR): Failed to receive battery data
2016-11-11T19:56:04.736Z,1478894164.736 [BPC1] Communications Fault, FailCount= 1
2016-11-11T19:56:04.736Z,1478894164.736 [BPC1](ERROR): Communications Fault
2016-11-11T19:56:04.744Z,1478894164.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:04.764Z,1478894164.764 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T19:56:05.044Z,1478894165.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:05.143Z,1478894165.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:05.549Z,1478894165.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:05.840Z,1478894165.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:05.959Z,1478894165.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:05.996Z,1478894165.996 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T19:56:05.996Z,1478894165.996 [BPC1] No Fault, FailCount= 1
2016-11-11T19:56:06.405Z,1478894166.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:06.604Z,1478894166.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:06.755Z,1478894166.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:07.156Z,1478894167.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:07.400Z,1478894167.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:07.555Z,1478894167.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:07.955Z,1478894167.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:08.197Z,1478894168.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:08.356Z,1478894168.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:08.608Z,1478894168.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:08.753Z,1478894168.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:09.161Z,1478894169.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:09.404Z,1478894169.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:09.560Z,1478894169.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:09.964Z,1478894169.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:10.128Z,1478894170.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:10.377Z,1478894170.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:10.740Z,1478894170.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:10.924Z,1478894170.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:11.140Z,1478894171.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:11.549Z,1478894171.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:11.721Z,1478894171.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:11.953Z,1478894171.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:12.132Z,1478894172.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:12.347Z,1478894172.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:12.749Z,1478894172.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:12.805Z,1478894172.805 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T19:56:12.928Z,1478894172.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:13.148Z,1478894173.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:13.547Z,1478894173.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:13.725Z,1478894173.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:13.957Z,1478894173.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:14.140Z,1478894174.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:14.345Z,1478894174.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:14.751Z,1478894174.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:14.936Z,1478894174.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:15.144Z,1478894175.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:15.578Z,1478894175.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:15.733Z,1478894175.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:15.957Z,1478894175.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:16.148Z,1478894176.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:16.369Z,1478894176.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:16.757Z,1478894176.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:16.944Z,1478894176.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:17.173Z,1478894177.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:17.581Z,1478894177.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:17.740Z,1478894177.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:18.228Z,1478894178.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:19.024Z,1478894179.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:19.820Z,1478894179.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:20.580Z,1478894180.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:20.991Z,1478894180.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:21.124Z,1478894181.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:21.376Z,1478894181.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:21.502Z,1478894181.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:21.896Z,1478894181.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:22.173Z,1478894182.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:22.297Z,1478894182.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:22.592Z,1478894182.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:22.706Z,1478894182.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:23.098Z,1478894183.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:23.388Z,1478894183.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:23.497Z,1478894183.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:23.896Z,1478894183.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:24.108Z,1478894184.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:24.298Z,1478894184.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:24.705Z,1478894184.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:24.904Z,1478894184.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:25.101Z,1478894185.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:25.495Z,1478894185.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:25.706Z,1478894185.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:25.909Z,1478894185.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:26.124Z,1478894186.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:26.313Z,1478894186.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:26.706Z,1478894186.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:26.920Z,1478894186.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:27.097Z,1478894187.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:27.505Z,1478894187.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:27.717Z,1478894187.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:27.909Z,1478894187.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:28.128Z,1478894188.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:28.321Z,1478894188.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:28.703Z,1478894188.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:28.924Z,1478894188.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:29.108Z,1478894189.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:29.529Z,1478894189.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:29.721Z,1478894189.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:29.909Z,1478894189.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:30.132Z,1478894190.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:30.312Z,1478894190.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:30.725Z,1478894190.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:30.928Z,1478894190.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:31.114Z,1478894191.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:31.525Z,1478894191.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:31.724Z,1478894191.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:31.925Z,1478894191.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:32.224Z,1478894192.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:32.310Z,1478894192.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:32.695Z,1478894192.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:33.020Z,1478894193.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:33.097Z,1478894193.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:33.501Z,1478894193.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:33.816Z,1478894193.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:33.909Z,1478894193.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:34.301Z,1478894194.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:34.556Z,1478894194.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:34.701Z,1478894194.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:35.101Z,1478894195.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:35.352Z,1478894195.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:35.499Z,1478894195.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:35.901Z,1478894195.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:36.149Z,1478894196.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:36.296Z,1478894196.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:36.560Z,1478894196.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:36.701Z,1478894196.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:37.101Z,1478894197.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:37.356Z,1478894197.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:37.501Z,1478894197.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:37.901Z,1478894197.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:38.084Z,1478894198.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:38.301Z,1478894198.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:38.701Z,1478894198.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:38.880Z,1478894198.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:39.095Z,1478894199.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:39.500Z,1478894199.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:39.676Z,1478894199.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:39.904Z,1478894199.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:40.108Z,1478894200.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:40.296Z,1478894200.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:40.709Z,1478894200.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:40.904Z,1478894200.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:41.116Z,1478894201.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:41.508Z,1478894201.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:41.701Z,1478894201.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:41.907Z,1478894201.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:42.112Z,1478894202.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:42.329Z,1478894202.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:42.713Z,1478894202.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:42.908Z,1478894202.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:43.088Z,1478894203.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:43.497Z,1478894203.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:43.705Z,1478894203.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:43.924Z,1478894203.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:44.116Z,1478894204.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:44.346Z,1478894204.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:44.695Z,1478894204.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:44.912Z,1478894204.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:45.133Z,1478894205.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:45.495Z,1478894205.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:45.708Z,1478894205.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:45.930Z,1478894205.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:46.188Z,1478894206.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:46.333Z,1478894206.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:46.709Z,1478894206.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:46.984Z,1478894206.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:47.109Z,1478894207.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:47.505Z,1478894207.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:47.781Z,1478894207.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:47.914Z,1478894207.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:48.316Z,1478894208.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:48.544Z,1478894208.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:48.710Z,1478894208.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:49.111Z,1478894209.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:49.340Z,1478894209.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:49.511Z,1478894209.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:49.909Z,1478894209.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:50.137Z,1478894210.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:50.309Z,1478894210.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:50.548Z,1478894210.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:50.718Z,1478894210.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:51.130Z,1478894211.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:51.344Z,1478894211.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:51.500Z,1478894211.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:51.917Z,1478894211.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:52.080Z,1478894212.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:52.306Z,1478894212.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:52.720Z,1478894212.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:52.876Z,1478894212.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:53.120Z,1478894213.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:53.513Z,1478894213.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:53.673Z,1478894213.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:53.898Z,1478894213.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:54.084Z,1478894214.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:54.314Z,1478894214.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:54.726Z,1478894214.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:54.880Z,1478894214.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:55.117Z,1478894215.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:55.506Z,1478894215.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:55.677Z,1478894215.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:55.925Z,1478894215.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:56.088Z,1478894216.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:56.326Z,1478894216.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:56.738Z,1478894216.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:56.884Z,1478894216.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:57.092Z,1478894217.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:57.501Z,1478894217.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:57.681Z,1478894217.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:57.936Z,1478894217.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:58.088Z,1478894218.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:58.296Z,1478894218.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:58.767Z,1478894218.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:58.885Z,1478894218.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:59.114Z,1478894219.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:59.498Z,1478894219.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:56:59.680Z,1478894219.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:56:59.957Z,1478894219.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:00.172Z,1478894220.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:00.334Z,1478894220.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:00.730Z,1478894220.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:00.968Z,1478894220.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:01.121Z,1478894221.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:01.510Z,1478894221.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:01.764Z,1478894221.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:01.931Z,1478894221.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:02.328Z,1478894222.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:02.512Z,1478894222.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:02.719Z,1478894222.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:03.109Z,1478894223.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:03.308Z,1478894223.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:03.536Z,1478894223.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:03.909Z,1478894223.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:04.105Z,1478894224.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:04.309Z,1478894224.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:04.544Z,1478894224.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:04.696Z,1478894224.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:05.092Z,1478894225.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:05.340Z,1478894225.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:05.492Z,1478894225.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:05.887Z,1478894225.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:06.136Z,1478894226.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:06.297Z,1478894226.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:06.697Z,1478894226.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:06.932Z,1478894226.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:07.091Z,1478894227.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:07.493Z,1478894227.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:07.728Z,1478894227.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:07.897Z,1478894227.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:08.293Z,1478894228.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:08.524Z,1478894228.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:08.697Z,1478894228.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:09.088Z,1478894229.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:09.320Z,1478894229.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:09.497Z,1478894229.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:09.897Z,1478894229.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:10.118Z,1478894230.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:10.293Z,1478894230.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:10.697Z,1478894230.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:10.912Z,1478894230.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:11.097Z,1478894231.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:11.517Z,1478894231.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:11.708Z,1478894231.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:11.893Z,1478894231.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:12.292Z,1478894232.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:12.504Z,1478894232.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:12.693Z,1478894232.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:13.110Z,1478894233.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:13.300Z,1478894233.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:13.488Z,1478894233.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:13.925Z,1478894233.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:14.096Z,1478894234.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:14.297Z,1478894234.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:14.721Z,1478894234.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:14.892Z,1478894234.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:15.161Z,1478894235.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:15.497Z,1478894235.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:15.688Z,1478894235.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:15.897Z,1478894235.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:16.288Z,1478894236.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:16.484Z,1478894236.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:16.697Z,1478894236.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:17.088Z,1478894237.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:17.280Z,1478894237.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:17.492Z,1478894237.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:17.910Z,1478894237.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:18.076Z,1478894238.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:18.872Z,1478894238.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:19.668Z,1478894239.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:20.464Z,1478894240.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:21.260Z,1478894241.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:21.336Z,1478894241.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:21.461Z,1478894241.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:21.804Z,1478894241.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:22.056Z,1478894242.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:22.206Z,1478894242.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:22.609Z,1478894242.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:22.852Z,1478894242.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:23.017Z,1478894243.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:23.409Z,1478894243.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:23.648Z,1478894243.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:23.813Z,1478894243.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:24.209Z,1478894244.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:24.444Z,1478894244.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:24.609Z,1478894244.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:25.009Z,1478894245.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:25.240Z,1478894245.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:25.405Z,1478894245.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:25.801Z,1478894245.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:26.036Z,1478894246.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:26.229Z,1478894246.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:26.605Z,1478894246.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:26.832Z,1478894246.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:27.033Z,1478894247.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:27.467Z,1478894247.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:27.628Z,1478894247.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:27.830Z,1478894247.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:28.205Z,1478894248.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:28.424Z,1478894248.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:28.637Z,1478894248.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:29.029Z,1478894249.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:29.220Z,1478894249.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:29.437Z,1478894249.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:29.660Z,1478894249.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:29.826Z,1478894249.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:30.069Z,1478894250.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:30.218Z,1478894250.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:30.480Z,1478894250.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:30.621Z,1478894250.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:30.888Z,1478894250.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:31.039Z,1478894251.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:31.296Z,1478894251.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:31.421Z,1478894251.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:31.704Z,1478894251.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:31.817Z,1478894251.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:32.112Z,1478894252.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:32.219Z,1478894252.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:32.524Z,1478894252.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:32.610Z,1478894252.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:32.932Z,1478894252.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:33.017Z,1478894253.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:33.340Z,1478894253.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:33.418Z,1478894253.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:33.748Z,1478894253.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:33.830Z,1478894253.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:34.156Z,1478894254.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:34.225Z,1478894254.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:34.616Z,1478894254.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:34.633Z,1478894254.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:35.024Z,1478894255.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:35.038Z,1478894255.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:35.401Z,1478894255.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:35.432Z,1478894255.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:35.830Z,1478894255.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:35.988Z,1478894255.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:36.230Z,1478894256.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:36.617Z,1478894256.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:36.784Z,1478894256.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:37.030Z,1478894257.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:37.417Z,1478894257.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:37.580Z,1478894257.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:37.818Z,1478894257.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:37.992Z,1478894257.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:38.230Z,1478894258.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:38.645Z,1478894258.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:38.788Z,1478894258.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:39.008Z,1478894259.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:39.402Z,1478894259.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:39.585Z,1478894259.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:39.854Z,1478894259.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:39.996Z,1478894259.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:40.221Z,1478894260.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:40.630Z,1478894260.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:40.792Z,1478894260.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:41.041Z,1478894261.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:41.417Z,1478894261.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:41.589Z,1478894261.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:41.829Z,1478894261.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:42.076Z,1478894262.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:42.241Z,1478894262.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:42.629Z,1478894262.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:42.872Z,1478894262.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:43.038Z,1478894263.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:43.417Z,1478894263.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:43.668Z,1478894263.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:43.823Z,1478894263.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:44.251Z,1478894264.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:44.436Z,1478894264.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:44.617Z,1478894264.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:45.017Z,1478894265.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:45.232Z,1478894265.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:45.409Z,1478894265.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:45.817Z,1478894265.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:46.029Z,1478894266.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:46.217Z,1478894266.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:46.444Z,1478894266.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:46.614Z,1478894266.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:47.027Z,1478894267.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:47.240Z,1478894267.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:47.429Z,1478894267.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:47.841Z,1478894267.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:47.964Z,1478894267.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:48.213Z,1478894268.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:48.606Z,1478894268.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:48.760Z,1478894268.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:49.007Z,1478894269.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:49.405Z,1478894269.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:49.557Z,1478894269.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:49.813Z,1478894269.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:49.976Z,1478894269.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:50.207Z,1478894270.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:50.606Z,1478894270.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:50.772Z,1478894270.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:51.013Z,1478894271.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:51.408Z,1478894271.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:51.569Z,1478894271.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:51.821Z,1478894271.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:51.980Z,1478894271.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:52.209Z,1478894272.210 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:52.210Z,1478894272.210 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 282
2016-11-11T19:57:52.210Z,1478894272.210 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T19:57:52.216Z,1478894272.216 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:52.216Z,1478894272.216 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 282
2016-11-11T19:57:52.216Z,1478894272.216 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T19:57:52.218Z,1478894272.218 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:52.218Z,1478894272.218 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 282
2016-11-11T19:57:52.219Z,1478894272.218 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T19:57:52.232Z,1478894272.232 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T19:57:52.233Z,1478894272.233 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T19:57:52.233Z,1478894272.233 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T19:57:52.632Z,1478894272.632 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T19:57:52.632Z,1478894272.632 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 282
2016-11-11T19:57:52.633Z,1478894272.633 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T19:57:52.633Z,1478894272.633 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 282
2016-11-11T19:57:52.634Z,1478894272.634 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T19:57:52.634Z,1478894272.634 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 282
2016-11-11T19:57:52.776Z,1478894272.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:53.015Z,1478894273.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T19:57:53.016Z,1478894273.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:57:53.016Z,1478894273.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:57:53.021Z,1478894273.021 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T19:57:53.021Z,1478894273.021 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:57:53.022Z,1478894273.022 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:57:53.022Z,1478894273.022 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T19:57:53.023Z,1478894273.023 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T19:57:53.023Z,1478894273.023 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T19:57:53.425Z,1478894273.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:53.573Z,1478894273.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:53.833Z,1478894273.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:53.984Z,1478894273.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:54.207Z,1478894274.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:54.645Z,1478894274.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:54.780Z,1478894274.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:55.009Z,1478894275.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:55.411Z,1478894275.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:55.576Z,1478894275.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:55.847Z,1478894275.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:56.092Z,1478894276.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:56.207Z,1478894276.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:56.649Z,1478894276.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:56.888Z,1478894276.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:57.064Z,1478894277.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:57.412Z,1478894277.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:57.684Z,1478894277.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:57.808Z,1478894277.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:58.225Z,1478894278.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:58.424Z,1478894278.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:58.625Z,1478894278.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:59.025Z,1478894279.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:59.220Z,1478894279.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:57:59.410Z,1478894279.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:57:59.804Z,1478894279.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:00.028Z,1478894280.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:00.217Z,1478894280.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:00.448Z,1478894280.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:00.613Z,1478894280.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:01.022Z,1478894281.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:01.244Z,1478894281.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:01.412Z,1478894281.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:01.813Z,1478894281.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:01.940Z,1478894281.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:02.208Z,1478894282.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:02.618Z,1478894282.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:02.738Z,1478894282.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:03.014Z,1478894283.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:03.409Z,1478894283.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:03.533Z,1478894283.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:03.816Z,1478894283.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:03.952Z,1478894283.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:04.217Z,1478894284.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:04.617Z,1478894284.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:04.748Z,1478894284.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:05.023Z,1478894285.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:05.421Z,1478894285.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:05.545Z,1478894285.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:05.810Z,1478894285.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:05.964Z,1478894285.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:06.221Z,1478894286.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:06.617Z,1478894286.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:06.760Z,1478894286.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:07.015Z,1478894287.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:07.417Z,1478894287.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:07.557Z,1478894287.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:07.861Z,1478894287.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:07.968Z,1478894287.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:08.217Z,1478894288.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:08.621Z,1478894288.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:08.764Z,1478894288.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:09.041Z,1478894289.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:09.405Z,1478894289.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:09.560Z,1478894289.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:09.839Z,1478894289.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:10.044Z,1478894290.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:10.205Z,1478894290.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:10.637Z,1478894290.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:10.840Z,1478894290.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:11.026Z,1478894291.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:11.421Z,1478894291.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:11.636Z,1478894291.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:11.816Z,1478894291.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:12.213Z,1478894292.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:12.396Z,1478894292.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:12.607Z,1478894292.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:13.010Z,1478894293.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:13.192Z,1478894293.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:13.413Z,1478894293.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:13.813Z,1478894293.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:13.990Z,1478894293.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:14.208Z,1478894294.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:14.404Z,1478894294.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:14.627Z,1478894294.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:15.009Z,1478894295.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:15.200Z,1478894295.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:15.410Z,1478894295.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:15.805Z,1478894295.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:15.928Z,1478894295.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:16.208Z,1478894296.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:16.606Z,1478894296.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:16.724Z,1478894296.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:17.013Z,1478894297.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:17.022Z,1478894297.022 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T19:58:17.022Z,1478894297.022 [Default:CheckIn:C.Wait] Stopped
2016-11-11T19:58:17.022Z,1478894297.022 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T19:58:17.022Z,1478894297.022 [Default:CheckIn:D] Running Loop=1
2016-11-11T19:58:17.413Z,1478894297.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:17.422Z,1478894297.422 [Default:CheckIn:D] Stopped
2016-11-11T19:58:17.422Z,1478894297.422 [Default:CheckIn:E] Running Loop=1
2016-11-11T19:58:17.521Z,1478894297.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:17.820Z,1478894297.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:17.842Z,1478894297.842 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 908.268555 min 
2016-11-11T19:58:17.842Z,1478894297.842 [Default:CheckIn:E] Stopped
2016-11-11T19:58:17.842Z,1478894297.842 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T19:58:17.843Z,1478894297.843 [Default:CheckIn] Stopped
2016-11-11T19:58:17.843Z,1478894297.843 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T19:58:17.847Z,1478894297.847 [Default:CheckIn](INFO): Running loop #88
2016-11-11T19:58:17.847Z,1478894297.847 [Default:CheckIn] Running Loop=88
2016-11-11T19:58:17.847Z,1478894297.847 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T19:58:17.848Z,1478894297.848 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T19:58:17.932Z,1478894297.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:18.217Z,1478894298.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:18.728Z,1478894298.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:19.525Z,1478894299.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:19.940Z,1478894299.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:20.736Z,1478894300.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:21.533Z,1478894301.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:21.630Z,1478894301.630 [NAL9602](INFO): Powering up
2016-11-11T19:58:21.706Z,1478894301.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:21.830Z,1478894301.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:21.944Z,1478894301.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:22.234Z,1478894302.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:22.657Z,1478894302.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:22.740Z,1478894302.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:23.020Z,1478894303.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:23.419Z,1478894303.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:23.538Z,1478894303.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:23.853Z,1478894303.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:24.012Z,1478894304.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:24.218Z,1478894304.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:24.657Z,1478894304.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:24.808Z,1478894304.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:25.046Z,1478894305.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:25.422Z,1478894305.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:25.604Z,1478894305.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:25.828Z,1478894305.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:26.233Z,1478894306.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:26.372Z,1478894306.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:26.621Z,1478894306.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:27.029Z,1478894307.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:27.168Z,1478894307.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:27.430Z,1478894307.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:27.822Z,1478894307.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:27.965Z,1478894307.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:28.233Z,1478894308.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:28.380Z,1478894308.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:28.630Z,1478894308.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:29.022Z,1478894309.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:29.176Z,1478894309.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:29.425Z,1478894309.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:29.825Z,1478894309.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:29.904Z,1478894309.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:30.218Z,1478894310.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:30.622Z,1478894310.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:30.700Z,1478894310.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:31.018Z,1478894311.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:31.438Z,1478894311.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:31.496Z,1478894311.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:31.830Z,1478894311.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:31.928Z,1478894311.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:32.241Z,1478894312.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:32.585Z,1478894312.585 [NAL9602](INFO): NAL9602 initialized
2016-11-11T19:58:32.636Z,1478894312.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:32.724Z,1478894312.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:33.025Z,1478894313.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:33.385Z,1478894313.385 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T19:58:33.385Z,1478894313.385 [NAL9602] Data Fault, FailCount= 3
2016-11-11T19:58:33.385Z,1478894313.385 [NAL9602](ERROR): Data Fault
2016-11-11T19:58:33.477Z,1478894313.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:33.521Z,1478894313.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:33.564Z,1478894313.564 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T19:58:33.780Z,1478894313.780 [NAL9602](INFO): Powering down
2016-11-11T19:58:33.817Z,1478894313.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:33.932Z,1478894313.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:34.221Z,1478894314.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:34.615Z,1478894314.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:34.660Z,1478894314.659 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T19:58:34.660Z,1478894314.660 [NAL9602] No Fault, FailCount= 3
2016-11-11T19:58:34.728Z,1478894314.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:35.016Z,1478894315.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:35.420Z,1478894315.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:35.524Z,1478894315.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:35.842Z,1478894315.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:35.932Z,1478894315.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:36.222Z,1478894316.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:36.622Z,1478894316.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:36.728Z,1478894316.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:37.057Z,1478894317.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:37.418Z,1478894317.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:37.524Z,1478894317.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:37.845Z,1478894317.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:38.004Z,1478894318.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:38.246Z,1478894318.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:38.615Z,1478894318.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:38.800Z,1478894318.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:38.988Z,1478894318.988 [NAL9602](INFO): Powering up NAL9602
2016-11-11T19:58:39.057Z,1478894319.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:39.425Z,1478894319.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:39.596Z,1478894319.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:39.853Z,1478894319.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:40.228Z,1478894320.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:40.352Z,1478894320.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:40.632Z,1478894320.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:41.028Z,1478894321.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:41.148Z,1478894321.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:41.429Z,1478894321.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:41.832Z,1478894321.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:41.945Z,1478894321.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:42.224Z,1478894322.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:42.356Z,1478894322.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:42.632Z,1478894322.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:43.032Z,1478894323.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:43.152Z,1478894323.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:43.427Z,1478894323.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:43.829Z,1478894323.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:43.896Z,1478894323.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:44.238Z,1478894324.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:44.621Z,1478894324.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:44.692Z,1478894324.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:45.025Z,1478894325.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:45.433Z,1478894325.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:45.489Z,1478894325.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:45.826Z,1478894325.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:45.900Z,1478894325.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:46.225Z,1478894326.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:46.622Z,1478894326.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:46.696Z,1478894326.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:47.024Z,1478894327.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:47.430Z,1478894327.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:47.493Z,1478894327.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:47.817Z,1478894327.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:47.904Z,1478894327.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:48.215Z,1478894328.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:48.619Z,1478894328.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:48.700Z,1478894328.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:49.025Z,1478894329.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:49.422Z,1478894329.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:49.497Z,1478894329.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:49.842Z,1478894329.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:49.908Z,1478894329.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:50.181Z,1478894330.181 [NAL9602](INFO): NAL9602 initialized
2016-11-11T19:58:50.234Z,1478894330.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:50.636Z,1478894330.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:50.704Z,1478894330.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:51.034Z,1478894331.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:51.466Z,1478894331.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:51.500Z,1478894331.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:51.873Z,1478894331.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:51.976Z,1478894331.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:52.237Z,1478894332.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:52.649Z,1478894332.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:52.773Z,1478894332.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:53.038Z,1478894333.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:53.457Z,1478894333.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:53.568Z,1478894333.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:53.857Z,1478894333.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:54.220Z,1478894334.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:54.348Z,1478894334.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:54.628Z,1478894334.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:55.025Z,1478894335.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:55.144Z,1478894335.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:55.429Z,1478894335.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:55.822Z,1478894335.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:55.941Z,1478894335.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:56.225Z,1478894336.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:56.352Z,1478894336.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:56.619Z,1478894336.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:57.020Z,1478894337.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:57.148Z,1478894337.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:57.499Z,1478894337.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:57.830Z,1478894337.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:57.873Z,1478894337.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:58.230Z,1478894338.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:58.630Z,1478894338.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:58.668Z,1478894338.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:59.035Z,1478894339.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:59.464Z,1478894339.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:58:59.500Z,1478894339.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:59.837Z,1478894339.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:58:59.876Z,1478894339.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:00.221Z,1478894340.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:00.620Z,1478894340.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:00.672Z,1478894340.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:01.025Z,1478894341.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:01.469Z,1478894341.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:01.483Z,1478894341.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:01.822Z,1478894341.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:01.880Z,1478894341.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:02.233Z,1478894342.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:02.628Z,1478894342.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:02.676Z,1478894342.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:03.032Z,1478894343.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:03.473Z,1478894343.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:03.492Z,1478894343.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:03.829Z,1478894343.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:03.884Z,1478894343.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:04.229Z,1478894344.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:04.619Z,1478894344.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:04.680Z,1478894344.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:05.029Z,1478894345.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:05.422Z,1478894345.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:05.477Z,1478894345.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:05.881Z,1478894345.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:05.948Z,1478894345.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:06.212Z,1478894346.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:06.649Z,1478894346.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:06.744Z,1478894346.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:07.038Z,1478894347.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:07.468Z,1478894347.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:07.540Z,1478894347.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:07.844Z,1478894347.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:08.269Z,1478894348.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:08.320Z,1478894348.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:08.621Z,1478894348.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:09.027Z,1478894349.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:09.116Z,1478894349.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:09.422Z,1478894349.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:09.821Z,1478894349.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:09.913Z,1478894349.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:10.222Z,1478894350.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:10.324Z,1478894350.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:10.642Z,1478894350.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:11.012Z,1478894351.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:11.122Z,1478894351.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:11.500Z,1478894351.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:11.825Z,1478894351.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:11.860Z,1478894351.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:12.216Z,1478894352.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:12.620Z,1478894352.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:12.656Z,1478894352.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:13.029Z,1478894353.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:13.452Z,1478894353.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:13.462Z,1478894353.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:13.828Z,1478894353.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:13.876Z,1478894353.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:14.226Z,1478894354.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:14.621Z,1478894354.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:14.672Z,1478894354.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:15.029Z,1478894355.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:15.463Z,1478894355.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:15.476Z,1478894355.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:15.813Z,1478894355.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:15.884Z,1478894355.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:16.243Z,1478894356.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:16.623Z,1478894356.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:16.680Z,1478894356.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:17.025Z,1478894357.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:17.472Z,1478894357.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:17.476Z,1478894357.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:17.826Z,1478894357.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:17.884Z,1478894357.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:18.229Z,1478894358.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:18.680Z,1478894358.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:19.476Z,1478894359.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:19.940Z,1478894359.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:20.736Z,1478894360.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:21.532Z,1478894361.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:21.693Z,1478894361.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:21.821Z,1478894361.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:22.205Z,1478894362.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:22.300Z,1478894362.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:22.601Z,1478894362.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:23.017Z,1478894363.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:23.096Z,1478894363.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:23.393Z,1478894363.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:23.831Z,1478894363.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:23.892Z,1478894363.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:24.230Z,1478894364.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:24.304Z,1478894364.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:24.597Z,1478894364.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:24.994Z,1478894364.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:25.100Z,1478894365.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:25.480Z,1478894365.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:25.810Z,1478894365.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:25.848Z,1478894365.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:26.201Z,1478894366.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:26.600Z,1478894366.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:26.644Z,1478894366.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:27.000Z,1478894367.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:27.440Z,1478894367.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:27.475Z,1478894367.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:27.803Z,1478894367.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:27.848Z,1478894367.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:28.192Z,1478894368.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:28.604Z,1478894368.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:28.644Z,1478894368.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:28.994Z,1478894368.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:29.442Z,1478894369.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:29.461Z,1478894369.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:29.801Z,1478894369.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:29.852Z,1478894369.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:30.200Z,1478894370.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:30.604Z,1478894370.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:30.648Z,1478894370.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:31.003Z,1478894371.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:31.444Z,1478894371.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:31.461Z,1478894371.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:31.798Z,1478894371.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:31.852Z,1478894371.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:32.201Z,1478894372.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:32.598Z,1478894372.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:32.648Z,1478894372.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:32.997Z,1478894372.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:33.403Z,1478894373.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:33.444Z,1478894373.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:33.808Z,1478894373.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:33.936Z,1478894373.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:34.212Z,1478894374.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:34.605Z,1478894374.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:34.732Z,1478894374.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:35.000Z,1478894375.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:35.393Z,1478894375.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:35.528Z,1478894375.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:35.816Z,1478894375.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:36.262Z,1478894376.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:36.268Z,1478894376.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:36.600Z,1478894376.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:37.043Z,1478894377.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:37.064Z,1478894377.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:37.405Z,1478894377.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:37.810Z,1478894377.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:37.860Z,1478894377.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:38.221Z,1478894378.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:38.272Z,1478894378.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:38.597Z,1478894378.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:38.997Z,1478894378.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:39.068Z,1478894379.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:39.488Z,1478894379.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:39.796Z,1478894379.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:39.811Z,1478894379.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:40.185Z,1478894380.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:40.592Z,1478894380.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:40.598Z,1478894380.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:40.992Z,1478894380.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:41.389Z,1478894381.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:41.468Z,1478894381.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:41.800Z,1478894381.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:41.817Z,1478894381.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:42.207Z,1478894382.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:42.596Z,1478894382.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:42.612Z,1478894382.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:43.002Z,1478894383.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:43.393Z,1478894383.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:43.473Z,1478894383.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:43.804Z,1478894383.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:43.821Z,1478894383.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:44.188Z,1478894384.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:44.616Z,1478894384.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:44.624Z,1478894384.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:44.991Z,1478894384.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:45.412Z,1478894385.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:45.474Z,1478894385.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:45.805Z,1478894385.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:45.824Z,1478894385.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:46.209Z,1478894386.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:46.610Z,1478894386.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:46.621Z,1478894386.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:46.989Z,1478894386.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:47.389Z,1478894387.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:47.416Z,1478894387.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:47.803Z,1478894387.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:47.896Z,1478894387.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:48.200Z,1478894388.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:48.600Z,1478894388.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:48.692Z,1478894388.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:49.016Z,1478894389.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:49.405Z,1478894389.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:49.488Z,1478894389.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:49.804Z,1478894389.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:50.233Z,1478894390.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:50.256Z,1478894390.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:50.641Z,1478894390.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:51.021Z,1478894391.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:51.080Z,1478894391.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:51.433Z,1478894391.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:51.797Z,1478894391.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:51.876Z,1478894391.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:52.229Z,1478894392.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:52.284Z,1478894392.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:52.623Z,1478894392.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:52.996Z,1478894392.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:53.080Z,1478894393.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:53.462Z,1478894393.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:53.813Z,1478894393.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:53.832Z,1478894393.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:54.206Z,1478894394.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:54.600Z,1478894394.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:54.652Z,1478894394.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:55.000Z,1478894395.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:55.448Z,1478894395.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:55.463Z,1478894395.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:55.809Z,1478894395.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:55.856Z,1478894395.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:56.212Z,1478894396.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:56.611Z,1478894396.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:56.652Z,1478894396.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:57.011Z,1478894397.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:57.434Z,1478894397.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:57.448Z,1478894397.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:57.814Z,1478894397.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:57.856Z,1478894397.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:58.194Z,1478894398.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:58.597Z,1478894398.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:58.652Z,1478894398.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:58.958Z,1478894398.958 [NAL9602](INFO): SBD MO Status=2, MOMSN=357, MT Status=2, MTMSN=0
2016-11-11T19:59:58.958Z,1478894398.958 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T19:59:59.015Z,1478894399.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:59.444Z,1478894399.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:59.448Z,1478894399.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T19:59:59.809Z,1478894399.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T19:59:59.856Z,1478894399.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:00.202Z,1478894400.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:00.610Z,1478894400.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:00.652Z,1478894400.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:01.005Z,1478894401.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:01.406Z,1478894401.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:01.449Z,1478894401.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:01.801Z,1478894401.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:01.896Z,1478894401.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:02.200Z,1478894402.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:02.609Z,1478894402.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:02.692Z,1478894402.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:03.008Z,1478894403.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:03.406Z,1478894403.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:03.488Z,1478894403.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:03.860Z,1478894403.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:04.209Z,1478894404.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:04.284Z,1478894404.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:04.649Z,1478894404.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:05.043Z,1478894405.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:05.080Z,1478894405.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:05.410Z,1478894405.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:05.839Z,1478894405.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:05.876Z,1478894405.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:06.237Z,1478894406.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:06.284Z,1478894406.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:06.623Z,1478894406.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:07.021Z,1478894407.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:07.080Z,1478894407.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:07.449Z,1478894407.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:07.764Z,1478894407.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:07.808Z,1478894407.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:08.205Z,1478894408.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:08.561Z,1478894408.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:08.609Z,1478894408.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:09.006Z,1478894409.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:09.358Z,1478894409.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:09.435Z,1478894409.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:09.768Z,1478894409.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:09.793Z,1478894409.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:10.197Z,1478894410.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:10.565Z,1478894410.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:10.617Z,1478894410.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:10.982Z,1478894410.982 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2016-11-11T20:00:11.022Z,1478894411.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:11.361Z,1478894411.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:11.432Z,1478894411.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:11.772Z,1478894411.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:11.816Z,1478894411.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:12.224Z,1478894412.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:12.568Z,1478894412.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:12.586Z,1478894412.586 [PNI_TCM](ERROR): CRC does not match. Expected:0x53699 got:0x49579
2016-11-11T20:00:12.606Z,1478894412.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:13.003Z,1478894413.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:13.365Z,1478894413.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:13.438Z,1478894413.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:13.784Z,1478894413.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:13.811Z,1478894413.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:14.200Z,1478894414.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:14.582Z,1478894414.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:14.613Z,1478894414.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:15.017Z,1478894415.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:15.376Z,1478894415.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:15.455Z,1478894415.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:15.778Z,1478894415.778 [PNI_TCM](ERROR): CRC does not match. Expected:0x20535 got:0x7490
2016-11-11T20:00:15.817Z,1478894415.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:15.852Z,1478894415.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:16.205Z,1478894416.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:16.592Z,1478894416.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:16.648Z,1478894416.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:17.013Z,1478894417.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:17.386Z,1478894417.385 [PNI_TCM](ERROR): CRC does not match. Expected:0x21993 got:0x38
2016-11-11T20:00:17.406Z,1478894417.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:17.444Z,1478894417.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:17.848Z,1478894417.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:18.198Z,1478894418.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:18.232Z,1478894418.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:18.613Z,1478894418.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:19.028Z,1478894419.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:19.825Z,1478894419.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:20.232Z,1478894420.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:21.028Z,1478894421.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:21.732Z,1478894421.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:22.189Z,1478894422.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:22.341Z,1478894422.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:22.528Z,1478894422.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:22.757Z,1478894422.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:23.105Z,1478894423.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:23.329Z,1478894423.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:23.556Z,1478894423.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:23.752Z,1478894423.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:23.933Z,1478894423.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:24.306Z,1478894424.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:24.548Z,1478894424.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:24.703Z,1478894424.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:25.085Z,1478894425.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:25.347Z,1478894425.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:25.490Z,1478894425.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:25.760Z,1478894425.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:25.889Z,1478894425.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:26.293Z,1478894426.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:26.556Z,1478894426.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:26.688Z,1478894426.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:27.087Z,1478894427.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:27.352Z,1478894427.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:27.502Z,1478894427.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:27.760Z,1478894427.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:27.897Z,1478894427.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:28.302Z,1478894428.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:28.556Z,1478894428.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:28.705Z,1478894428.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:29.093Z,1478894429.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:29.352Z,1478894429.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:29.517Z,1478894429.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:29.896Z,1478894429.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:29.911Z,1478894429.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:30.301Z,1478894430.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:30.686Z,1478894430.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:30.696Z,1478894430.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:31.089Z,1478894431.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:31.492Z,1478894431.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:31.494Z,1478894431.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:31.888Z,1478894431.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:32.180Z,1478894432.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:32.299Z,1478894432.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:32.706Z,1478894432.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:32.976Z,1478894432.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:33.089Z,1478894433.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:33.492Z,1478894433.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:33.773Z,1478894433.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:33.896Z,1478894433.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:34.184Z,1478894434.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:34.301Z,1478894434.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:34.678Z,1478894434.678 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T20:00:34.678Z,1478894434.678 [BPC1] Data Fault, FailCount= 1
2016-11-11T20:00:34.678Z,1478894434.678 [BPC1](ERROR): Data Fault
2016-11-11T20:00:34.698Z,1478894434.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:34.758Z,1478894434.758 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T20:00:34.980Z,1478894434.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:35.086Z,1478894435.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:35.497Z,1478894435.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:35.708Z,1478894435.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:35.893Z,1478894435.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:35.938Z,1478894435.938 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:00:35.939Z,1478894435.939 [BPC1] No Fault, FailCount= 1
2016-11-11T20:00:36.353Z,1478894436.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:36.504Z,1478894436.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:36.734Z,1478894436.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:37.093Z,1478894437.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:37.301Z,1478894437.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:37.498Z,1478894437.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:37.744Z,1478894437.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:37.896Z,1478894437.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:38.296Z,1478894438.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:38.540Z,1478894438.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:38.696Z,1478894438.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:39.097Z,1478894439.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:39.337Z,1478894439.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:39.517Z,1478894439.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:39.748Z,1478894439.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:39.881Z,1478894439.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:40.285Z,1478894440.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:40.544Z,1478894440.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:40.685Z,1478894440.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:41.112Z,1478894441.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:41.340Z,1478894441.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:41.497Z,1478894441.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:41.748Z,1478894441.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:41.893Z,1478894441.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:42.297Z,1478894442.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:42.544Z,1478894442.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:42.695Z,1478894442.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:43.088Z,1478894443.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:43.340Z,1478894443.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:43.490Z,1478894443.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:43.804Z,1478894443.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:43.895Z,1478894443.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:44.293Z,1478894444.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:44.600Z,1478894444.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:44.701Z,1478894444.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:45.090Z,1478894445.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:45.396Z,1478894445.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:45.497Z,1478894445.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:45.901Z,1478894445.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:46.156Z,1478894446.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:46.301Z,1478894446.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:46.700Z,1478894446.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:46.952Z,1478894446.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:47.101Z,1478894447.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:47.497Z,1478894447.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:47.749Z,1478894447.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:47.885Z,1478894447.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:48.164Z,1478894448.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:48.293Z,1478894448.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:48.729Z,1478894448.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:48.960Z,1478894448.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:49.119Z,1478894449.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:49.493Z,1478894449.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:49.688Z,1478894449.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:49.890Z,1478894449.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:50.337Z,1478894450.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:50.484Z,1478894450.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:50.650Z,1478894450.650 [NAL9602](INFO): SBD MO Status=2, MOMSN=357, MT Status=2, MTMSN=0
2016-11-11T20:00:50.650Z,1478894450.650 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T20:00:50.737Z,1478894450.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:51.141Z,1478894451.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:51.281Z,1478894451.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:51.531Z,1478894451.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:51.692Z,1478894451.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:51.901Z,1478894451.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:52.290Z,1478894452.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:52.488Z,1478894452.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:52.698Z,1478894452.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:53.098Z,1478894453.098 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:53.098Z,1478894453.098 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 283
2016-11-11T20:00:53.098Z,1478894453.098 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:00:53.105Z,1478894453.105 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:53.105Z,1478894453.105 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 283
2016-11-11T20:00:53.105Z,1478894453.105 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:00:53.107Z,1478894453.107 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:53.117Z,1478894453.117 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 283
2016-11-11T20:00:53.117Z,1478894453.117 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:00:53.145Z,1478894453.145 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:00:53.146Z,1478894453.145 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:00:53.146Z,1478894453.146 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:00:53.285Z,1478894453.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:53.546Z,1478894453.546 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:00:53.546Z,1478894453.546 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 283
2016-11-11T20:00:53.547Z,1478894453.547 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:00:53.547Z,1478894453.547 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 283
2016-11-11T20:00:53.552Z,1478894453.552 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:00:53.552Z,1478894453.552 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 283
2016-11-11T20:00:53.696Z,1478894453.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:53.952Z,1478894453.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:00:53.952Z,1478894453.952 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:00:53.952Z,1478894453.953 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:00:53.957Z,1478894453.957 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:00:53.957Z,1478894453.957 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:00:53.958Z,1478894453.958 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:00:53.958Z,1478894453.958 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:00:53.959Z,1478894453.959 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:00:53.959Z,1478894453.959 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:00:54.285Z,1478894454.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:54.495Z,1478894454.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:54.683Z,1478894454.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:55.124Z,1478894455.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:55.293Z,1478894455.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:55.541Z,1478894455.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:55.708Z,1478894455.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:55.895Z,1478894455.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:56.288Z,1478894456.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:56.504Z,1478894456.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:56.699Z,1478894456.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:57.090Z,1478894457.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:57.301Z,1478894457.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:57.501Z,1478894457.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:57.788Z,1478894457.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:57.900Z,1478894457.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:58.290Z,1478894458.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:58.584Z,1478894458.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:58.697Z,1478894458.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:59.097Z,1478894459.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:59.380Z,1478894459.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:00:59.490Z,1478894459.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:00:59.890Z,1478894459.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:00.140Z,1478894460.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:00.297Z,1478894460.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:00.694Z,1478894460.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:00.936Z,1478894460.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:01.101Z,1478894461.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:01.497Z,1478894461.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:01.733Z,1478894461.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:01.888Z,1478894461.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:02.144Z,1478894462.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:02.293Z,1478894462.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:02.692Z,1478894462.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:02.940Z,1478894462.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:03.087Z,1478894463.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:03.527Z,1478894463.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:03.668Z,1478894463.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:03.925Z,1478894463.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:04.300Z,1478894464.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:04.464Z,1478894464.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:04.710Z,1478894464.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:05.116Z,1478894465.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:05.261Z,1478894465.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:05.503Z,1478894465.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:05.672Z,1478894465.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:05.912Z,1478894465.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:06.325Z,1478894466.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:06.468Z,1478894466.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:06.683Z,1478894466.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:07.062Z,1478894467.062 [NAL9602](INFO): SBD MO Status=2, MOMSN=357, MT Status=2, MTMSN=0
2016-11-11T20:01:07.062Z,1478894467.062 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T20:01:07.101Z,1478894467.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:07.265Z,1478894467.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:07.514Z,1478894467.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:07.676Z,1478894467.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:07.890Z,1478894467.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:08.289Z,1478894468.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:08.474Z,1478894468.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:08.697Z,1478894468.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:09.090Z,1478894469.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:09.269Z,1478894469.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:09.497Z,1478894469.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:09.680Z,1478894469.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:09.897Z,1478894469.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:10.290Z,1478894470.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:10.476Z,1478894470.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:10.700Z,1478894470.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:11.100Z,1478894471.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:11.273Z,1478894471.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:11.503Z,1478894471.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:11.772Z,1478894471.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:11.904Z,1478894471.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:12.285Z,1478894472.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:12.568Z,1478894472.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:12.686Z,1478894472.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:13.093Z,1478894473.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:13.364Z,1478894473.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:13.497Z,1478894473.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:13.888Z,1478894473.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:14.120Z,1478894474.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:14.302Z,1478894474.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:14.710Z,1478894474.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:14.916Z,1478894474.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:15.093Z,1478894475.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:15.497Z,1478894475.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:15.713Z,1478894475.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:15.901Z,1478894475.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:16.140Z,1478894476.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:16.292Z,1478894476.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:16.697Z,1478894476.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:16.936Z,1478894476.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:17.086Z,1478894477.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:17.492Z,1478894477.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:17.644Z,1478894477.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:17.892Z,1478894477.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:18.341Z,1478894478.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:18.440Z,1478894478.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:18.702Z,1478894478.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:19.237Z,1478894479.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:19.648Z,1478894479.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:20.444Z,1478894480.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:21.241Z,1478894481.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:21.652Z,1478894481.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:22.154Z,1478894482.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:22.289Z,1478894482.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:22.448Z,1478894482.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:22.693Z,1478894482.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:23.092Z,1478894483.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:23.244Z,1478894483.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:23.480Z,1478894483.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:23.656Z,1478894483.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:23.877Z,1478894483.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:24.257Z,1478894484.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:24.452Z,1478894484.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:24.677Z,1478894484.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:25.061Z,1478894485.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:25.248Z,1478894485.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:25.434Z,1478894485.434 [NAL9602](INFO): SBD MO Status=0, MOMSN=357, MT Status=0, MTMSN=0
2016-11-11T20:01:25.434Z,1478894485.434 [NAL9602](INFO): No messages in MT queue
2016-11-11T20:01:25.503Z,1478894485.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:25.752Z,1478894485.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:25.861Z,1478894485.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:26.271Z,1478894486.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:26.548Z,1478894486.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:26.670Z,1478894486.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:27.079Z,1478894487.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:27.345Z,1478894487.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:27.470Z,1478894487.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:27.869Z,1478894487.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:28.096Z,1478894488.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:28.269Z,1478894488.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:28.683Z,1478894488.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:28.892Z,1478894488.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:29.085Z,1478894489.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:29.477Z,1478894489.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:29.689Z,1478894489.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:29.888Z,1478894489.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:30.100Z,1478894490.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:30.312Z,1478894490.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:30.661Z,1478894490.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:30.896Z,1478894490.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:31.062Z,1478894491.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:31.474Z,1478894491.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:31.624Z,1478894491.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:31.878Z,1478894491.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:32.270Z,1478894492.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:32.420Z,1478894492.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:32.669Z,1478894492.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:33.062Z,1478894493.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:33.217Z,1478894493.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:33.461Z,1478894493.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:33.628Z,1478894493.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:33.874Z,1478894493.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:34.267Z,1478894494.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:34.424Z,1478894494.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:34.674Z,1478894494.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:35.129Z,1478894495.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:35.221Z,1478894495.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:35.512Z,1478894495.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:35.632Z,1478894495.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:35.863Z,1478894495.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:36.261Z,1478894496.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:36.428Z,1478894496.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:36.695Z,1478894496.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:37.065Z,1478894497.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:37.225Z,1478894497.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:37.512Z,1478894497.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:37.638Z,1478894497.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:37.901Z,1478894497.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:38.277Z,1478894498.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:38.432Z,1478894498.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:38.667Z,1478894498.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:39.062Z,1478894499.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:39.228Z,1478894499.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:39.469Z,1478894499.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:39.728Z,1478894499.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:39.869Z,1478894499.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:40.262Z,1478894500.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:40.524Z,1478894500.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:40.670Z,1478894500.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:41.081Z,1478894501.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:41.320Z,1478894501.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:41.480Z,1478894501.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:41.876Z,1478894501.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:42.076Z,1478894502.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:42.280Z,1478894502.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:42.654Z,1478894502.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:42.872Z,1478894502.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:43.052Z,1478894503.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:43.473Z,1478894503.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:43.669Z,1478894503.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:43.873Z,1478894503.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:44.082Z,1478894504.082 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:44.298Z,1478894504.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:44.793Z,1478894504.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:44.880Z,1478894504.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:45.072Z,1478894505.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:45.465Z,1478894505.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:45.604Z,1478894505.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:45.896Z,1478894505.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:46.269Z,1478894506.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:46.400Z,1478894506.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:46.689Z,1478894506.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:47.101Z,1478894507.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:47.196Z,1478894507.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:47.490Z,1478894507.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:47.609Z,1478894507.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:47.869Z,1478894507.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:48.278Z,1478894508.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:48.404Z,1478894508.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:48.721Z,1478894508.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:49.081Z,1478894509.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:49.201Z,1478894509.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:49.496Z,1478894509.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:49.616Z,1478894509.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:49.957Z,1478894509.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:50.285Z,1478894510.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:50.413Z,1478894510.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:50.700Z,1478894510.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:51.085Z,1478894511.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:51.209Z,1478894511.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:51.489Z,1478894511.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:51.621Z,1478894511.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:51.893Z,1478894511.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:52.302Z,1478894512.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:52.416Z,1478894512.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:52.707Z,1478894512.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:53.091Z,1478894513.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:53.212Z,1478894513.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:53.493Z,1478894513.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:53.724Z,1478894513.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:53.893Z,1478894513.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:54.266Z,1478894514.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:54.520Z,1478894514.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:54.664Z,1478894514.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:55.104Z,1478894515.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:55.316Z,1478894515.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:55.479Z,1478894515.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:55.874Z,1478894515.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:56.048Z,1478894516.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:56.278Z,1478894516.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:56.669Z,1478894516.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:56.862Z,1478894516.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:57.096Z,1478894517.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:57.481Z,1478894517.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:57.657Z,1478894517.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:57.918Z,1478894517.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:58.068Z,1478894518.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:58.275Z,1478894518.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:58.685Z,1478894518.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:58.865Z,1478894518.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:59.090Z,1478894519.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:59.498Z,1478894519.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:01:59.612Z,1478894519.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:01:59.879Z,1478894519.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:00.282Z,1478894520.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:00.408Z,1478894520.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:00.704Z,1478894520.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:01.072Z,1478894521.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:01.204Z,1478894521.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:01.493Z,1478894521.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:01.612Z,1478894521.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:01.894Z,1478894521.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:02.281Z,1478894522.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:02.408Z,1478894522.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:02.686Z,1478894522.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:03.062Z,1478894523.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:03.204Z,1478894523.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:03.478Z,1478894523.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:03.612Z,1478894523.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:03.958Z,1478894523.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:04.284Z,1478894524.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:04.408Z,1478894524.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:04.686Z,1478894524.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:05.176Z,1478894525.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:05.204Z,1478894525.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:05.490Z,1478894525.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:05.612Z,1478894525.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:05.886Z,1478894525.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:06.299Z,1478894526.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:06.408Z,1478894526.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:06.674Z,1478894526.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:07.097Z,1478894527.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:07.205Z,1478894527.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:07.494Z,1478894527.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:07.672Z,1478894527.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:07.894Z,1478894527.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:08.305Z,1478894528.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:08.468Z,1478894528.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:08.681Z,1478894528.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:09.074Z,1478894529.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:09.264Z,1478894529.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:09.479Z,1478894529.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:09.891Z,1478894529.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:10.040Z,1478894530.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:10.288Z,1478894530.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:10.701Z,1478894530.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:10.836Z,1478894530.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:11.093Z,1478894531.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:11.481Z,1478894531.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:11.633Z,1478894531.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:11.873Z,1478894531.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:12.044Z,1478894532.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:12.277Z,1478894532.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:12.677Z,1478894532.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:12.840Z,1478894532.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:13.077Z,1478894533.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:13.484Z,1478894533.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:13.576Z,1478894533.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:13.886Z,1478894533.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:14.280Z,1478894534.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:14.373Z,1478894534.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:14.691Z,1478894534.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:15.088Z,1478894535.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:15.169Z,1478894535.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:15.478Z,1478894535.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:15.581Z,1478894535.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:15.884Z,1478894535.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:16.298Z,1478894536.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:16.377Z,1478894536.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:16.682Z,1478894536.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:17.081Z,1478894537.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:17.172Z,1478894537.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:17.489Z,1478894537.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:17.584Z,1478894537.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:17.869Z,1478894537.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:18.341Z,1478894538.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:18.381Z,1478894538.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:18.672Z,1478894538.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:19.065Z,1478894539.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:19.176Z,1478894539.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:19.584Z,1478894539.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:20.380Z,1478894540.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:21.176Z,1478894541.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:21.640Z,1478894541.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:22.437Z,1478894542.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:22.461Z,1478894542.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:22.610Z,1478894542.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:22.969Z,1478894542.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:23.232Z,1478894543.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:23.361Z,1478894543.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:23.734Z,1478894543.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:23.000Z,1478894544.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:24.137Z,1478894544.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:24.553Z,1478894544.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:24.796Z,1478894544.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:24.949Z,1478894544.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:25.352Z,1478894545.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:25.593Z,1478894545.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:25.749Z,1478894545.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:26.004Z,1478894546.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:26.141Z,1478894546.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:26.541Z,1478894546.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:26.800Z,1478894546.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:26.953Z,1478894546.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:27.340Z,1478894547.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:27.524Z,1478894547.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:27.753Z,1478894547.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:28.157Z,1478894548.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:28.320Z,1478894548.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:28.553Z,1478894548.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:28.929Z,1478894548.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:29.117Z,1478894549.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:29.376Z,1478894549.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:29.528Z,1478894549.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:29.741Z,1478894549.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:30.137Z,1478894550.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:30.324Z,1478894550.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:30.542Z,1478894550.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:30.953Z,1478894550.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:31.121Z,1478894551.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:31.357Z,1478894551.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:31.532Z,1478894551.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:31.746Z,1478894551.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:32.137Z,1478894552.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:32.329Z,1478894552.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:32.533Z,1478894552.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:32.943Z,1478894552.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:33.125Z,1478894553.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:33.361Z,1478894553.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:33.540Z,1478894553.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:33.746Z,1478894553.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:34.196Z,1478894554.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:34.336Z,1478894554.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:34.545Z,1478894554.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:34.944Z,1478894554.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:35.132Z,1478894555.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:35.405Z,1478894555.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:35.624Z,1478894555.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:35.744Z,1478894555.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:36.177Z,1478894556.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:36.420Z,1478894556.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:36.549Z,1478894556.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:36.982Z,1478894556.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:37.216Z,1478894557.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:37.351Z,1478894557.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:37.762Z,1478894557.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:37.980Z,1478894557.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:38.141Z,1478894558.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:38.544Z,1478894558.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:38.776Z,1478894558.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:38.945Z,1478894558.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:39.397Z,1478894559.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:39.573Z,1478894559.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:39.761Z,1478894559.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:39.984Z,1478894559.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:40.155Z,1478894560.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:40.537Z,1478894560.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:40.780Z,1478894560.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:40.937Z,1478894560.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:41.327Z,1478894561.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:41.512Z,1478894561.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:41.743Z,1478894561.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:42.139Z,1478894562.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:42.308Z,1478894562.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:42.549Z,1478894562.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:42.952Z,1478894562.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:43.105Z,1478894563.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:43.340Z,1478894563.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:43.520Z,1478894563.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:43.745Z,1478894563.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:44.133Z,1478894564.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:44.316Z,1478894564.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:44.542Z,1478894564.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:44.953Z,1478894564.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:45.113Z,1478894565.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:45.351Z,1478894565.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:45.532Z,1478894565.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:45.757Z,1478894565.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:46.145Z,1478894566.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:46.328Z,1478894566.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:46.544Z,1478894566.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:46.944Z,1478894566.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:47.126Z,1478894567.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:47.353Z,1478894567.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:47.536Z,1478894567.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:47.750Z,1478894567.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:48.157Z,1478894568.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:48.332Z,1478894568.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:48.548Z,1478894568.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:48.944Z,1478894568.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:49.131Z,1478894569.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:49.357Z,1478894569.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:49.624Z,1478894569.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:49.769Z,1478894569.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:50.141Z,1478894570.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:50.420Z,1478894570.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:50.578Z,1478894570.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:50.947Z,1478894570.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:51.218Z,1478894571.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:51.375Z,1478894571.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:51.785Z,1478894571.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:51.960Z,1478894571.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:52.134Z,1478894572.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:52.534Z,1478894572.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:52.756Z,1478894572.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:52.943Z,1478894572.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:53.341Z,1478894573.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:53.553Z,1478894573.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:53.753Z,1478894573.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:53.964Z,1478894573.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:54.146Z,1478894574.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:54.553Z,1478894574.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:54.760Z,1478894574.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:54.944Z,1478894574.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:55.345Z,1478894575.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:55.480Z,1478894575.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:55.749Z,1478894575.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:56.144Z,1478894576.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:56.278Z,1478894576.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:56.546Z,1478894576.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:56.953Z,1478894576.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:57.073Z,1478894577.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:57.350Z,1478894577.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:57.492Z,1478894577.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:57.744Z,1478894577.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:58.140Z,1478894578.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:58.288Z,1478894578.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:58.549Z,1478894578.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:58.949Z,1478894578.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:59.085Z,1478894579.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:59.337Z,1478894579.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:02:59.508Z,1478894579.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:02:59.745Z,1478894579.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:00.143Z,1478894580.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:00.307Z,1478894580.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:00.549Z,1478894580.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:00.933Z,1478894580.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:01.105Z,1478894581.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:01.338Z,1478894581.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:01.516Z,1478894581.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:01.741Z,1478894581.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:02.137Z,1478894582.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:02.312Z,1478894582.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:02.550Z,1478894582.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:02.953Z,1478894582.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:03.108Z,1478894583.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:03.349Z,1478894583.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:03.588Z,1478894583.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:03.765Z,1478894583.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:04.173Z,1478894584.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:04.386Z,1478894584.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:04.549Z,1478894584.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:04.934Z,1478894584.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:05.180Z,1478894585.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:05.330Z,1478894585.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:05.769Z,1478894585.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:05.932Z,1478894585.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:06.147Z,1478894586.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:06.572Z,1478894586.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:06.728Z,1478894586.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:06.971Z,1478894586.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:07.341Z,1478894587.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:07.525Z,1478894587.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:07.735Z,1478894587.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:07.936Z,1478894587.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:08.141Z,1478894588.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:08.553Z,1478894588.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:08.732Z,1478894588.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:08.953Z,1478894588.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:09.349Z,1478894589.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:09.460Z,1478894589.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:09.744Z,1478894589.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:10.141Z,1478894590.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:10.256Z,1478894590.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:10.544Z,1478894590.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:10.942Z,1478894590.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:11.053Z,1478894591.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:11.329Z,1478894591.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:11.464Z,1478894591.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:11.755Z,1478894591.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:12.153Z,1478894592.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:12.260Z,1478894592.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:12.552Z,1478894592.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:12.929Z,1478894592.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:13.057Z,1478894593.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:13.357Z,1478894593.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:13.468Z,1478894593.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:13.733Z,1478894593.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:14.135Z,1478894594.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:14.264Z,1478894594.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:14.545Z,1478894594.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:14.946Z,1478894594.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:15.061Z,1478894595.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:15.355Z,1478894595.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:15.472Z,1478894595.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:15.733Z,1478894595.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:16.128Z,1478894596.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:16.268Z,1478894596.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:16.537Z,1478894596.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:16.938Z,1478894596.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:17.064Z,1478894597.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:17.337Z,1478894597.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:17.568Z,1478894597.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:17.746Z,1478894597.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:18.149Z,1478894598.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:18.159Z,1478894598.158 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T19:58:17.8Z
2016-11-11T20:03:18.159Z,1478894598.159 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T20:03:18.159Z,1478894598.159 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T20:03:18.364Z,1478894598.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:18.553Z,1478894598.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:19.160Z,1478894599.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:19.446Z,1478894599.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:19.636Z,1478894599.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:19.944Z,1478894599.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:20.740Z,1478894600.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:21.536Z,1478894601.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:21.944Z,1478894601.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:22.740Z,1478894602.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:23.226Z,1478894603.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:23.287Z,1478894603.286 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0352.lzma
2016-11-11T20:03:23.365Z,1478894603.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:23.432Z,1478894603.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:23.765Z,1478894603.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:24.090Z,1478894604.089 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0352.lzma.bak
2016-11-11T20:03:24.090Z,1478894604.090 [DataOverHttps](INFO): SBD MOMSN=4555716
2016-11-11T20:03:24.162Z,1478894604.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:24.228Z,1478894604.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:25.025Z,1478894605.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:25.436Z,1478894605.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:25.589Z,1478894605.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:25.715Z,1478894605.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:26.232Z,1478894606.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:27.029Z,1478894607.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:27.440Z,1478894607.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:28.236Z,1478894608.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:29.033Z,1478894609.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:29.096Z,1478894609.096 [NAL9602](INFO): Powering down
2016-11-11T20:03:29.193Z,1478894609.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:29.325Z,1478894609.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:29.444Z,1478894609.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:29.685Z,1478894609.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:30.086Z,1478894610.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:30.240Z,1478894610.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:30.480Z,1478894610.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:30.884Z,1478894610.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:31.036Z,1478894611.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:31.700Z,1478894611.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:32.496Z,1478894612.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:33.292Z,1478894613.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:33.892Z,1478894613.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:34.443Z,1478894614.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:34.503Z,1478894614.503 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0353.lzma
2016-11-11T20:03:34.581Z,1478894614.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:34.688Z,1478894614.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:34.955Z,1478894614.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:35.301Z,1478894615.302 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0353.lzma.bak
2016-11-11T20:03:35.302Z,1478894615.302 [DataOverHttps](INFO): SBD MOMSN=4555718
2016-11-11T20:03:35.361Z,1478894615.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:35.485Z,1478894615.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:35.900Z,1478894615.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:36.686Z,1478894616.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:36.696Z,1478894616.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:36.703Z,1478894616.703 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T20:03:36.703Z,1478894616.703 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T20:03:36.707Z,1478894616.707 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T20:03:36.809Z,1478894616.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:37.404Z,1478894617.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:38.200Z,1478894618.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:38.997Z,1478894618.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:39.416Z,1478894619.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:40.212Z,1478894620.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:40.321Z,1478894620.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:40.437Z,1478894620.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:40.826Z,1478894620.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:41.009Z,1478894621.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:41.235Z,1478894621.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:41.424Z,1478894621.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:41.595Z,1478894621.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:42.040Z,1478894622.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:42.220Z,1478894622.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:42.401Z,1478894622.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:42.800Z,1478894622.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:43.017Z,1478894623.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:43.193Z,1478894623.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:43.432Z,1478894623.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:43.601Z,1478894623.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:44.000Z,1478894624.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:44.228Z,1478894624.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:44.395Z,1478894624.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:44.803Z,1478894624.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:45.027Z,1478894625.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:45.202Z,1478894625.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:45.504Z,1478894625.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:45.601Z,1478894625.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:46.002Z,1478894626.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:46.300Z,1478894626.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:46.400Z,1478894626.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:46.801Z,1478894626.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:47.096Z,1478894627.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:47.194Z,1478894627.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:47.600Z,1478894627.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:47.856Z,1478894627.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:47.993Z,1478894627.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:48.403Z,1478894628.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:48.652Z,1478894628.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:48.801Z,1478894628.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:49.201Z,1478894629.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:49.449Z,1478894629.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:49.601Z,1478894629.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:49.860Z,1478894629.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:50.004Z,1478894630.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:50.404Z,1478894630.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:50.656Z,1478894630.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:50.805Z,1478894630.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:51.222Z,1478894631.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:51.380Z,1478894631.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:51.616Z,1478894631.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:52.016Z,1478894632.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:52.176Z,1478894632.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:52.421Z,1478894632.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:52.817Z,1478894632.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:52.973Z,1478894632.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:53.233Z,1478894633.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:53.388Z,1478894633.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:53.592Z,1478894633.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:53.998Z,1478894633.997 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:53.998Z,1478894633.998 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 284
2016-11-11T20:03:53.998Z,1478894633.998 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:03:54.004Z,1478894634.004 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:54.005Z,1478894634.005 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 284
2016-11-11T20:03:54.005Z,1478894634.005 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:03:54.007Z,1478894634.007 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:54.007Z,1478894634.007 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 284
2016-11-11T20:03:54.007Z,1478894634.007 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:03:54.041Z,1478894634.041 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:03:54.041Z,1478894634.041 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:03:54.041Z,1478894634.041 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:03:54.184Z,1478894634.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:54.458Z,1478894634.458 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:03:54.458Z,1478894634.458 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 284
2016-11-11T20:03:54.459Z,1478894634.459 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:03:54.459Z,1478894634.459 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 284
2016-11-11T20:03:54.460Z,1478894634.460 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:03:54.460Z,1478894634.460 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 284
2016-11-11T20:03:54.798Z,1478894634.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:03:54.798Z,1478894634.798 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:03:54.799Z,1478894634.799 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:03:54.804Z,1478894634.804 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:03:54.804Z,1478894634.804 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:03:54.804Z,1478894634.805 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:03:54.805Z,1478894634.805 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:03:54.805Z,1478894634.805 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:03:54.806Z,1478894634.806 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:03:54.981Z,1478894634.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:55.245Z,1478894635.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:55.392Z,1478894635.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:55.613Z,1478894635.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:56.010Z,1478894636.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:56.188Z,1478894636.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:56.405Z,1478894636.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:56.849Z,1478894636.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:56.988Z,1478894636.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:57.218Z,1478894637.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:57.400Z,1478894637.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:57.611Z,1478894637.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:58.009Z,1478894638.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:58.196Z,1478894638.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:58.384Z,1478894638.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:58.787Z,1478894638.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:58.992Z,1478894638.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:59.217Z,1478894639.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:59.480Z,1478894639.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:03:59.588Z,1478894639.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:03:59.991Z,1478894639.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:00.276Z,1478894640.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:00.396Z,1478894640.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:00.791Z,1478894640.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:01.072Z,1478894641.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:01.201Z,1478894641.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:01.600Z,1478894641.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:01.832Z,1478894641.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:01.993Z,1478894641.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:02.397Z,1478894642.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:02.628Z,1478894642.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:02.803Z,1478894642.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:03.200Z,1478894643.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:03.425Z,1478894643.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:03.601Z,1478894643.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:03.840Z,1478894643.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:04.001Z,1478894644.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:04.409Z,1478894644.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:04.636Z,1478894644.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:04.788Z,1478894644.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:05.236Z,1478894645.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:05.432Z,1478894645.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:05.593Z,1478894645.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:05.993Z,1478894645.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:06.228Z,1478894646.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:06.389Z,1478894646.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:06.813Z,1478894646.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:07.024Z,1478894647.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:07.189Z,1478894647.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:07.617Z,1478894647.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:07.820Z,1478894647.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:08.029Z,1478894648.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:08.414Z,1478894648.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:08.616Z,1478894648.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:08.790Z,1478894648.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:09.218Z,1478894649.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:09.412Z,1478894649.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:09.623Z,1478894649.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:09.989Z,1478894649.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:10.208Z,1478894650.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:10.389Z,1478894650.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:10.797Z,1478894650.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:11.004Z,1478894651.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:11.197Z,1478894651.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:11.629Z,1478894651.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:11.800Z,1478894651.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:11.990Z,1478894651.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:12.393Z,1478894652.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:12.596Z,1478894652.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:12.801Z,1478894652.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:13.241Z,1478894653.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:13.392Z,1478894653.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:13.597Z,1478894653.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:14.014Z,1478894654.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:14.188Z,1478894654.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:14.391Z,1478894654.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:14.788Z,1478894654.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:14.984Z,1478894654.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:15.197Z,1478894655.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:15.587Z,1478894655.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:15.780Z,1478894655.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:15.984Z,1478894655.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:16.388Z,1478894656.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:16.576Z,1478894656.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:16.785Z,1478894656.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:17.188Z,1478894657.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:17.372Z,1478894657.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:17.609Z,1478894657.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:17.993Z,1478894657.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:18.168Z,1478894658.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:18.388Z,1478894658.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:18.789Z,1478894658.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:18.964Z,1478894658.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:19.193Z,1478894659.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:19.589Z,1478894659.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:19.760Z,1478894659.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:19.993Z,1478894659.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:20.402Z,1478894660.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:20.556Z,1478894660.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:20.788Z,1478894660.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:21.206Z,1478894661.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:21.352Z,1478894661.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:21.606Z,1478894661.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:21.988Z,1478894661.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:22.148Z,1478894662.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:22.384Z,1478894662.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:22.788Z,1478894662.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:22.944Z,1478894662.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:23.217Z,1478894663.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:23.588Z,1478894663.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:23.740Z,1478894663.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:24.010Z,1478894664.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:24.461Z,1478894664.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:24.536Z,1478894664.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:24.802Z,1478894664.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:25.188Z,1478894665.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:25.332Z,1478894665.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:25.661Z,1478894665.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:25.994Z,1478894665.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:26.016Z,1478894666.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:26.397Z,1478894666.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:26.424Z,1478894666.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:26.785Z,1478894666.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:26.832Z,1478894666.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:27.189Z,1478894667.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:27.240Z,1478894667.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:27.597Z,1478894667.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:27.648Z,1478894667.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:28.005Z,1478894668.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:28.056Z,1478894668.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:28.421Z,1478894668.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:28.464Z,1478894668.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:28.793Z,1478894668.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:28.872Z,1478894668.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:29.205Z,1478894669.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:29.280Z,1478894669.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:29.609Z,1478894669.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:29.688Z,1478894669.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:30.041Z,1478894670.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:30.096Z,1478894670.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:30.401Z,1478894670.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:30.504Z,1478894670.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:30.793Z,1478894670.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:30.912Z,1478894670.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:31.205Z,1478894671.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:31.601Z,1478894671.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:31.708Z,1478894671.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:31.997Z,1478894671.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:32.116Z,1478894672.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:32.397Z,1478894672.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:32.789Z,1478894672.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:32.913Z,1478894672.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:33.205Z,1478894673.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:33.324Z,1478894673.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:33.593Z,1478894673.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:33.990Z,1478894673.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:34.120Z,1478894674.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:34.390Z,1478894674.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:34.797Z,1478894674.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:34.919Z,1478894674.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:35.245Z,1478894675.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:35.336Z,1478894675.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:35.605Z,1478894675.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:36.004Z,1478894676.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:36.132Z,1478894676.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:36.429Z,1478894676.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:36.809Z,1478894676.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:36.929Z,1478894676.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:37.197Z,1478894677.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:37.340Z,1478894677.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:38.136Z,1478894678.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:38.933Z,1478894678.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:39.344Z,1478894679.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:40.140Z,1478894680.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:40.580Z,1478894680.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:40.689Z,1478894680.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:40.939Z,1478894680.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:41.117Z,1478894681.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:41.432Z,1478894681.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:41.480Z,1478894681.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:41.868Z,1478894681.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:42.228Z,1478894682.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:42.261Z,1478894682.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:42.651Z,1478894682.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:43.024Z,1478894683.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:43.054Z,1478894683.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:43.450Z,1478894683.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:43.764Z,1478894683.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:43.857Z,1478894683.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:44.251Z,1478894684.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:44.560Z,1478894684.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:44.665Z,1478894684.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:45.065Z,1478894685.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:45.357Z,1478894685.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:45.452Z,1478894685.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:45.768Z,1478894685.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:45.860Z,1478894685.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:46.265Z,1478894686.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:46.564Z,1478894686.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:46.652Z,1478894686.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:47.060Z,1478894687.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:47.304Z,1478894687.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:47.458Z,1478894687.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:47.857Z,1478894687.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:48.100Z,1478894688.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:48.262Z,1478894688.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:48.657Z,1478894688.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:48.900Z,1478894688.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:49.057Z,1478894689.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:49.320Z,1478894689.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:49.453Z,1478894689.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:49.861Z,1478894689.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:50.116Z,1478894690.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:50.260Z,1478894690.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:50.664Z,1478894690.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:50.913Z,1478894690.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:51.062Z,1478894691.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:51.324Z,1478894691.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:51.464Z,1478894691.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:51.888Z,1478894691.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:52.121Z,1478894692.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:52.253Z,1478894692.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:52.651Z,1478894692.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:52.916Z,1478894692.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:53.097Z,1478894693.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:53.324Z,1478894693.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:53.451Z,1478894693.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:53.852Z,1478894693.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:54.120Z,1478894694.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:54.292Z,1478894694.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:54.657Z,1478894694.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:54.916Z,1478894694.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:55.105Z,1478894695.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:55.452Z,1478894695.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:55.494Z,1478894695.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:55.857Z,1478894695.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:56.248Z,1478894696.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:56.252Z,1478894696.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:56.657Z,1478894696.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:57.044Z,1478894697.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:57.065Z,1478894697.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:57.462Z,1478894697.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:57.780Z,1478894697.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:57.863Z,1478894697.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:58.261Z,1478894698.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:58.576Z,1478894698.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:58.657Z,1478894698.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:59.061Z,1478894699.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:59.372Z,1478894699.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:59.465Z,1478894699.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:04:59.780Z,1478894699.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:04:59.858Z,1478894699.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:00.261Z,1478894700.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:00.576Z,1478894700.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:00.661Z,1478894700.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:01.064Z,1478894701.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:01.276Z,1478894701.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:01.461Z,1478894701.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:01.853Z,1478894701.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:02.072Z,1478894702.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:02.265Z,1478894702.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:02.654Z,1478894702.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:02.869Z,1478894702.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:03.062Z,1478894703.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:03.280Z,1478894703.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:03.458Z,1478894703.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:03.857Z,1478894703.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:04.076Z,1478894704.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:04.264Z,1478894704.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:04.652Z,1478894704.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:04.882Z,1478894704.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:05.069Z,1478894705.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:05.308Z,1478894705.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:05.471Z,1478894705.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:05.869Z,1478894705.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:06.104Z,1478894706.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:06.289Z,1478894706.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:06.651Z,1478894706.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:06.900Z,1478894706.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:07.056Z,1478894707.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:07.308Z,1478894707.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:07.493Z,1478894707.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:07.857Z,1478894707.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:08.104Z,1478894708.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:08.261Z,1478894708.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:08.681Z,1478894708.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:08.900Z,1478894708.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:09.065Z,1478894709.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:09.380Z,1478894709.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:09.477Z,1478894709.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:09.870Z,1478894709.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:10.176Z,1478894710.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:10.264Z,1478894710.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:10.664Z,1478894710.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:10.972Z,1478894710.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:11.064Z,1478894711.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:11.464Z,1478894711.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:11.728Z,1478894711.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:11.864Z,1478894711.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:12.263Z,1478894712.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:12.524Z,1478894712.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:12.665Z,1478894712.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:13.064Z,1478894713.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:13.321Z,1478894713.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:13.463Z,1478894713.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:13.732Z,1478894713.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:13.865Z,1478894713.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:14.265Z,1478894714.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:14.528Z,1478894714.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:14.664Z,1478894714.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:15.065Z,1478894715.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:15.257Z,1478894715.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:15.464Z,1478894715.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:15.864Z,1478894715.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:16.052Z,1478894716.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:16.265Z,1478894716.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:16.657Z,1478894716.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:16.852Z,1478894716.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:17.068Z,1478894717.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:17.264Z,1478894717.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:17.446Z,1478894717.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:17.849Z,1478894717.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:18.060Z,1478894718.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:18.250Z,1478894718.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:18.649Z,1478894718.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:18.857Z,1478894718.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:19.057Z,1478894719.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:19.276Z,1478894719.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:19.459Z,1478894719.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:19.851Z,1478894719.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:20.074Z,1478894720.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:20.293Z,1478894720.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:20.661Z,1478894720.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:20.869Z,1478894720.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:21.065Z,1478894721.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:21.280Z,1478894721.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:21.452Z,1478894721.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:21.886Z,1478894721.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:22.076Z,1478894722.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:22.272Z,1478894722.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:22.669Z,1478894722.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:22.872Z,1478894722.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:23.089Z,1478894723.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:23.348Z,1478894723.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:23.449Z,1478894723.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:23.880Z,1478894723.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:24.144Z,1478894724.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:24.279Z,1478894724.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:24.649Z,1478894724.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:24.940Z,1478894724.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:25.049Z,1478894725.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:25.456Z,1478894725.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:25.704Z,1478894725.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:25.857Z,1478894725.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:26.251Z,1478894726.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:26.500Z,1478894726.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:26.654Z,1478894726.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:27.051Z,1478894727.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:27.297Z,1478894727.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:27.451Z,1478894727.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:27.708Z,1478894727.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:27.858Z,1478894727.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:28.257Z,1478894728.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:28.504Z,1478894728.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:28.651Z,1478894728.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:29.057Z,1478894729.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:29.240Z,1478894729.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:29.457Z,1478894729.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:29.857Z,1478894729.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:30.036Z,1478894730.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:30.265Z,1478894730.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:30.662Z,1478894730.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:30.835Z,1478894730.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:31.059Z,1478894731.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:31.248Z,1478894731.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:31.465Z,1478894731.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:31.865Z,1478894731.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:32.044Z,1478894732.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:32.252Z,1478894732.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:32.659Z,1478894732.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:32.841Z,1478894732.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:33.062Z,1478894733.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:33.252Z,1478894733.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:33.454Z,1478894733.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:33.856Z,1478894733.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:34.048Z,1478894734.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:34.253Z,1478894734.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:34.653Z,1478894734.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:34.845Z,1478894734.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:35.105Z,1478894735.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:35.256Z,1478894735.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:35.454Z,1478894735.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:35.859Z,1478894735.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:36.052Z,1478894736.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:36.278Z,1478894736.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:36.664Z,1478894736.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:36.849Z,1478894736.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:37.061Z,1478894737.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:37.352Z,1478894737.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:37.489Z,1478894737.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:38.148Z,1478894738.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:38.944Z,1478894738.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:39.688Z,1478894739.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:40.484Z,1478894740.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:40.808Z,1478894740.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:40.961Z,1478894740.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:41.281Z,1478894741.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:41.366Z,1478894741.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:41.692Z,1478894741.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:41.704Z,1478894741.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:42.078Z,1478894742.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:42.476Z,1478894742.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:42.488Z,1478894742.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:42.905Z,1478894742.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:43.208Z,1478894743.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:43.285Z,1478894743.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:43.687Z,1478894743.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:44.004Z,1478894744.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:44.089Z,1478894744.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:44.496Z,1478894744.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:44.801Z,1478894744.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:44.899Z,1478894744.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:45.212Z,1478894745.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:45.292Z,1478894745.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:45.688Z,1478894745.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:46.008Z,1478894746.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:46.096Z,1478894746.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:46.518Z,1478894746.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:46.810Z,1478894746.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:46.899Z,1478894746.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:47.288Z,1478894747.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:47.301Z,1478894747.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:47.681Z,1478894747.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:48.081Z,1478894748.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:48.092Z,1478894748.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:48.481Z,1478894748.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:48.879Z,1478894748.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:48.888Z,1478894748.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:49.283Z,1478894749.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:49.296Z,1478894749.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:49.693Z,1478894749.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:50.083Z,1478894750.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:50.092Z,1478894750.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:50.489Z,1478894750.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:50.889Z,1478894750.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:50.955Z,1478894750.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:51.296Z,1478894751.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:51.312Z,1478894751.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:51.696Z,1478894751.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:52.108Z,1478894752.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:52.145Z,1478894752.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:52.480Z,1478894752.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:52.882Z,1478894752.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:52.904Z,1478894752.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:53.350Z,1478894753.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:53.664Z,1478894753.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:53.698Z,1478894753.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:54.113Z,1478894754.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:54.461Z,1478894754.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:54.509Z,1478894754.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:54.896Z,1478894754.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:55.257Z,1478894755.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:55.326Z,1478894755.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:55.701Z,1478894755.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:55.708Z,1478894755.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:56.104Z,1478894756.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:56.486Z,1478894756.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:56.504Z,1478894756.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:56.889Z,1478894756.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:57.188Z,1478894757.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:57.292Z,1478894757.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:57.686Z,1478894757.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:57.984Z,1478894757.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:58.089Z,1478894758.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:58.494Z,1478894758.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:58.781Z,1478894758.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:58.886Z,1478894758.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:59.192Z,1478894759.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:05:59.291Z,1478894759.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:59.694Z,1478894759.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:05:59.989Z,1478894759.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:00.086Z,1478894760.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:00.486Z,1478894760.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:00.785Z,1478894760.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:00.893Z,1478894760.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:01.196Z,1478894761.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:01.293Z,1478894761.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:01.709Z,1478894761.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:01.992Z,1478894761.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:02.093Z,1478894762.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:02.498Z,1478894762.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:02.789Z,1478894762.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:02.905Z,1478894762.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:03.204Z,1478894763.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:03.293Z,1478894763.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:03.693Z,1478894763.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:04.000Z,1478894764.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:04.096Z,1478894764.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:04.497Z,1478894764.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:04.796Z,1478894764.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:04.945Z,1478894764.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:05.328Z,1478894765.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:05.330Z,1478894765.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:05.681Z,1478894765.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:06.084Z,1478894766.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:06.124Z,1478894766.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:06.489Z,1478894766.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:06.902Z,1478894766.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:06.920Z,1478894766.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:07.322Z,1478894767.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:07.650Z,1478894767.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:07.717Z,1478894767.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:08.094Z,1478894768.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:08.444Z,1478894768.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:08.530Z,1478894768.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:08.930Z,1478894768.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:09.244Z,1478894769.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:09.305Z,1478894769.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:09.661Z,1478894769.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:09.677Z,1478894769.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:10.081Z,1478894770.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:10.458Z,1478894770.458 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:10.477Z,1478894770.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:10.880Z,1478894770.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:11.168Z,1478894771.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:11.289Z,1478894771.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:11.689Z,1478894771.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:11.964Z,1478894771.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:12.084Z,1478894772.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:12.487Z,1478894772.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:12.761Z,1478894772.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:12.891Z,1478894772.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:12.928Z,1478894772.928 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T20:06:13.176Z,1478894773.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:13.285Z,1478894773.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:13.689Z,1478894773.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:13.972Z,1478894773.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:14.095Z,1478894774.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:14.492Z,1478894774.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:14.769Z,1478894774.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:14.893Z,1478894774.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:15.180Z,1478894775.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:15.293Z,1478894775.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:15.692Z,1478894775.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:15.976Z,1478894775.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:16.094Z,1478894776.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:16.494Z,1478894776.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:16.773Z,1478894776.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:16.894Z,1478894776.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:17.184Z,1478894777.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:17.286Z,1478894777.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:17.701Z,1478894777.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:17.982Z,1478894777.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:18.102Z,1478894778.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:18.481Z,1478894778.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:18.776Z,1478894778.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:18.930Z,1478894778.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:19.268Z,1478894779.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:19.318Z,1478894779.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:19.689Z,1478894779.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:20.066Z,1478894780.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:20.089Z,1478894780.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:20.483Z,1478894780.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:20.861Z,1478894780.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:20.925Z,1478894780.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:21.313Z,1478894781.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:21.624Z,1478894781.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:21.687Z,1478894781.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:22.110Z,1478894782.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:22.422Z,1478894782.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:22.497Z,1478894782.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:22.906Z,1478894782.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:23.217Z,1478894783.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:23.317Z,1478894783.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:23.628Z,1478894783.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:23.694Z,1478894783.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:24.082Z,1478894784.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:24.424Z,1478894784.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:24.484Z,1478894784.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:24.889Z,1478894784.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:25.144Z,1478894785.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:25.288Z,1478894785.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:25.689Z,1478894785.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:25.940Z,1478894785.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:26.093Z,1478894786.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:26.484Z,1478894786.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:26.737Z,1478894786.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:26.891Z,1478894786.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:27.148Z,1478894787.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:27.289Z,1478894787.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:27.686Z,1478894787.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:27.944Z,1478894787.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:28.083Z,1478894788.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:28.489Z,1478894788.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:28.745Z,1478894788.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:28.884Z,1478894788.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:29.180Z,1478894789.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:29.292Z,1478894789.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:29.694Z,1478894789.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:29.976Z,1478894789.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:30.084Z,1478894790.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:30.493Z,1478894790.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:30.773Z,1478894790.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:30.892Z,1478894790.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:31.184Z,1478894791.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:31.284Z,1478894791.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:31.697Z,1478894791.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:31.980Z,1478894791.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:32.094Z,1478894792.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:32.486Z,1478894792.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:32.776Z,1478894792.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:32.924Z,1478894792.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:33.268Z,1478894793.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:33.306Z,1478894793.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:33.676Z,1478894793.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:34.064Z,1478894794.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:34.101Z,1478894794.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:34.528Z,1478894794.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:34.860Z,1478894794.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:34.885Z,1478894794.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:35.280Z,1478894795.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:35.596Z,1478894795.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:35.725Z,1478894795.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:36.087Z,1478894796.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:36.392Z,1478894796.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:36.488Z,1478894796.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:36.923Z,1478894796.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:37.189Z,1478894797.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:37.285Z,1478894797.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:37.600Z,1478894797.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:37.729Z,1478894797.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:38.396Z,1478894798.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:39.128Z,1478894799.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:39.924Z,1478894799.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:40.721Z,1478894800.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:41.136Z,1478894801.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:41.238Z,1478894801.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:41.361Z,1478894801.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:41.749Z,1478894801.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:41.932Z,1478894801.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:42.153Z,1478894802.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:42.547Z,1478894802.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:42.729Z,1478894802.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:42.949Z,1478894802.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:43.144Z,1478894803.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:43.353Z,1478894803.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:43.747Z,1478894803.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:43.940Z,1478894803.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:44.152Z,1478894804.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:44.553Z,1478894804.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:44.737Z,1478894804.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:44.948Z,1478894804.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:45.148Z,1478894805.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:45.352Z,1478894805.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:45.773Z,1478894805.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:45.944Z,1478894805.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:46.170Z,1478894806.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:46.542Z,1478894806.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:46.740Z,1478894806.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:46.962Z,1478894806.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:47.212Z,1478894807.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:47.366Z,1478894807.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:47.755Z,1478894807.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:48.008Z,1478894808.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:48.172Z,1478894808.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:48.546Z,1478894808.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:48.805Z,1478894808.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:48.954Z,1478894808.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:49.356Z,1478894809.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:49.576Z,1478894809.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:49.767Z,1478894809.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:50.178Z,1478894810.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:50.372Z,1478894810.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:50.586Z,1478894810.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:50.974Z,1478894810.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:51.169Z,1478894811.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:51.377Z,1478894811.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:51.580Z,1478894811.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:51.794Z,1478894811.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:52.210Z,1478894812.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:52.376Z,1478894812.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:52.578Z,1478894812.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:52.945Z,1478894812.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:53.092Z,1478894813.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:53.447Z,1478894813.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:53.748Z,1478894813.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:53.888Z,1478894813.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:54.173Z,1478894814.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:54.545Z,1478894814.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:54.685Z,1478894814.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:54.973Z,1478894814.973 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:54.973Z,1478894814.973 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 285
2016-11-11T20:06:54.973Z,1478894814.973 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:06:54.980Z,1478894814.980 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:54.980Z,1478894814.980 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 285
2016-11-11T20:06:54.980Z,1478894814.980 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:06:54.982Z,1478894814.982 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:54.983Z,1478894814.983 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 285
2016-11-11T20:06:54.983Z,1478894814.983 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:06:54.997Z,1478894814.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:06:54.997Z,1478894814.997 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:06:54.998Z,1478894814.998 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:06:55.368Z,1478894815.368 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:06:55.374Z,1478894815.374 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 285
2016-11-11T20:06:55.375Z,1478894815.375 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:06:55.375Z,1478894815.375 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 285
2016-11-11T20:06:55.375Z,1478894815.375 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:06:55.375Z,1478894815.375 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 285
2016-11-11T20:06:55.480Z,1478894815.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:55.768Z,1478894815.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:06:55.769Z,1478894815.769 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:06:55.769Z,1478894815.769 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:06:55.786Z,1478894815.786 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:06:55.787Z,1478894815.787 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:06:55.799Z,1478894815.799 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:06:55.800Z,1478894815.800 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:06:55.800Z,1478894815.800 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:06:55.801Z,1478894815.801 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:06:55.888Z,1478894815.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:56.162Z,1478894816.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:56.545Z,1478894816.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:56.685Z,1478894816.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:56.977Z,1478894816.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:57.096Z,1478894817.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:57.349Z,1478894817.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:57.761Z,1478894817.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:57.892Z,1478894817.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:58.173Z,1478894818.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:58.553Z,1478894818.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:58.689Z,1478894818.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:58.965Z,1478894818.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:59.136Z,1478894819.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:06:59.376Z,1478894819.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:59.771Z,1478894819.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:06:59.932Z,1478894819.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:00.141Z,1478894820.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:00.566Z,1478894820.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:00.728Z,1478894820.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:00.953Z,1478894820.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:01.192Z,1478894821.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:01.348Z,1478894821.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:01.765Z,1478894821.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:01.988Z,1478894821.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:02.147Z,1478894822.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:02.569Z,1478894822.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:02.784Z,1478894822.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:02.968Z,1478894822.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:03.366Z,1478894823.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:03.552Z,1478894823.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:03.781Z,1478894823.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:04.166Z,1478894824.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:04.348Z,1478894824.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:04.562Z,1478894824.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:05.005Z,1478894825.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:05.145Z,1478894825.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:05.366Z,1478894825.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:05.556Z,1478894825.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:05.768Z,1478894825.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:06.237Z,1478894826.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:06.352Z,1478894826.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:06.555Z,1478894826.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:06.975Z,1478894826.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:07.076Z,1478894827.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:07.413Z,1478894827.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:07.758Z,1478894827.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:07.872Z,1478894827.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:08.185Z,1478894828.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:08.561Z,1478894828.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:08.669Z,1478894828.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:08.982Z,1478894828.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:09.080Z,1478894829.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:09.381Z,1478894829.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:09.765Z,1478894829.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:09.876Z,1478894829.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:10.160Z,1478894830.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:10.596Z,1478894830.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:10.673Z,1478894830.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:10.980Z,1478894830.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:11.088Z,1478894831.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:11.362Z,1478894831.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:11.765Z,1478894831.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:11.884Z,1478894831.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:12.198Z,1478894832.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:12.570Z,1478894832.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:12.680Z,1478894832.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:12.961Z,1478894832.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:13.092Z,1478894833.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:13.361Z,1478894833.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:13.754Z,1478894833.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:13.888Z,1478894833.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:14.149Z,1478894834.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:14.572Z,1478894834.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:14.685Z,1478894834.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:14.974Z,1478894834.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:15.164Z,1478894835.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:15.357Z,1478894835.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:15.761Z,1478894835.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:15.960Z,1478894835.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:16.151Z,1478894836.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:16.578Z,1478894836.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:16.756Z,1478894836.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:16.976Z,1478894836.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:17.354Z,1478894837.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:17.536Z,1478894837.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:17.753Z,1478894837.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:18.153Z,1478894838.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:18.334Z,1478894838.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:18.566Z,1478894838.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:18.962Z,1478894838.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:19.129Z,1478894839.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:19.391Z,1478894839.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:19.540Z,1478894839.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:19.806Z,1478894839.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:20.169Z,1478894840.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:20.336Z,1478894840.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:20.548Z,1478894840.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:20.944Z,1478894840.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:21.060Z,1478894841.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:21.382Z,1478894841.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:21.754Z,1478894841.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:21.856Z,1478894841.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:22.147Z,1478894842.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:22.585Z,1478894842.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:22.653Z,1478894842.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:22.961Z,1478894842.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:23.072Z,1478894843.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:23.400Z,1478894843.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:23.766Z,1478894843.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:23.868Z,1478894843.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:24.161Z,1478894844.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:24.556Z,1478894844.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:24.665Z,1478894844.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:24.945Z,1478894844.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:25.076Z,1478894845.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:25.345Z,1478894845.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:25.746Z,1478894845.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:25.872Z,1478894845.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:26.145Z,1478894846.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:26.548Z,1478894846.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:26.668Z,1478894846.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:26.940Z,1478894846.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:27.076Z,1478894847.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:27.345Z,1478894847.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:27.745Z,1478894847.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:27.872Z,1478894847.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:28.144Z,1478894848.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:28.547Z,1478894848.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:28.668Z,1478894848.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:28.952Z,1478894848.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:29.140Z,1478894849.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:29.347Z,1478894849.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:29.746Z,1478894849.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:29.936Z,1478894849.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:30.148Z,1478894850.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:30.547Z,1478894850.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:30.732Z,1478894850.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:30.951Z,1478894850.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:31.355Z,1478894851.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:31.500Z,1478894851.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:31.748Z,1478894851.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:32.154Z,1478894852.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:32.296Z,1478894852.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:32.552Z,1478894852.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:32.950Z,1478894852.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:33.093Z,1478894853.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:33.369Z,1478894853.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:33.504Z,1478894853.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:33.757Z,1478894853.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:34.173Z,1478894854.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:34.300Z,1478894854.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:34.545Z,1478894854.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:34.974Z,1478894854.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:35.044Z,1478894855.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:35.357Z,1478894855.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:35.788Z,1478894855.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:35.840Z,1478894855.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:36.156Z,1478894856.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:36.636Z,1478894856.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:36.649Z,1478894856.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:36.953Z,1478894856.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:37.049Z,1478894857.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:37.381Z,1478894857.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:37.781Z,1478894857.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:37.844Z,1478894857.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:38.641Z,1478894858.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:39.052Z,1478894859.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:39.848Z,1478894859.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:40.644Z,1478894860.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:41.052Z,1478894861.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:41.580Z,1478894861.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:41.725Z,1478894861.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:41.848Z,1478894861.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:42.101Z,1478894862.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:42.495Z,1478894862.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:42.644Z,1478894862.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:42.909Z,1478894862.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:43.140Z,1478894863.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:43.301Z,1478894863.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:43.701Z,1478894863.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:43.936Z,1478894863.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:44.104Z,1478894864.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:44.505Z,1478894864.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:44.732Z,1478894864.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:44.909Z,1478894864.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:45.297Z,1478894865.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:45.480Z,1478894865.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:45.705Z,1478894865.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:46.101Z,1478894866.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:46.276Z,1478894866.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:46.498Z,1478894866.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:46.897Z,1478894866.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:47.073Z,1478894867.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:47.315Z,1478894867.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:47.496Z,1478894867.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:47.698Z,1478894867.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:48.109Z,1478894868.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:48.292Z,1478894868.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:48.521Z,1478894868.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:48.902Z,1478894868.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:49.004Z,1478894869.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:49.309Z,1478894869.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:49.733Z,1478894869.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:49.801Z,1478894869.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:50.090Z,1478894870.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:50.497Z,1478894870.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:50.597Z,1478894870.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:50.935Z,1478894870.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:51.008Z,1478894871.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:51.295Z,1478894871.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:51.729Z,1478894871.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:51.804Z,1478894871.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:52.130Z,1478894872.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:52.495Z,1478894872.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:52.605Z,1478894872.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:52.901Z,1478894872.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:53.016Z,1478894873.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:53.304Z,1478894873.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:53.701Z,1478894873.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:53.812Z,1478894873.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:54.105Z,1478894874.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:54.506Z,1478894874.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:54.609Z,1478894874.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:54.893Z,1478894874.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:55.020Z,1478894875.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:55.297Z,1478894875.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:55.721Z,1478894875.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:55.816Z,1478894875.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:56.096Z,1478894876.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:56.487Z,1478894876.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:56.612Z,1478894876.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:56.893Z,1478894876.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:57.100Z,1478894877.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:57.292Z,1478894877.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:57.695Z,1478894877.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:57.896Z,1478894877.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:58.101Z,1478894878.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:58.496Z,1478894878.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:58.692Z,1478894878.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:58.902Z,1478894878.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:59.305Z,1478894879.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:07:59.456Z,1478894879.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:07:59.698Z,1478894879.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:00.105Z,1478894880.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:00.252Z,1478894880.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:00.505Z,1478894880.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:00.901Z,1478894880.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:01.049Z,1478894881.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:01.311Z,1478894881.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:01.460Z,1478894881.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:01.709Z,1478894881.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:02.105Z,1478894882.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:02.256Z,1478894882.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:02.533Z,1478894882.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:02.901Z,1478894882.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:02.984Z,1478894882.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:03.296Z,1478894883.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:03.701Z,1478894883.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:03.780Z,1478894883.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:04.137Z,1478894884.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:04.496Z,1478894884.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:04.576Z,1478894884.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:04.912Z,1478894884.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:04.988Z,1478894884.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:05.342Z,1478894885.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:05.698Z,1478894885.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:05.784Z,1478894885.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:06.122Z,1478894886.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:06.521Z,1478894886.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:06.581Z,1478894886.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:06.900Z,1478894886.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:06.992Z,1478894886.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:07.301Z,1478894887.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:07.704Z,1478894887.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:07.788Z,1478894887.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:08.100Z,1478894888.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:08.501Z,1478894888.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:08.584Z,1478894888.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:08.906Z,1478894888.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:08.996Z,1478894888.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:09.298Z,1478894889.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:09.701Z,1478894889.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:09.792Z,1478894889.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:10.109Z,1478894890.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:10.504Z,1478894890.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:10.588Z,1478894890.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:10.913Z,1478894890.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:11.084Z,1478894891.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:11.305Z,1478894891.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:11.704Z,1478894891.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:11.880Z,1478894891.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:12.141Z,1478894892.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:12.495Z,1478894892.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:12.676Z,1478894892.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:12.896Z,1478894892.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:13.302Z,1478894893.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:13.436Z,1478894893.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:13.705Z,1478894893.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:14.098Z,1478894894.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:14.232Z,1478894894.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:14.512Z,1478894894.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:14.909Z,1478894894.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:15.034Z,1478894895.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:15.306Z,1478894895.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:15.464Z,1478894895.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:15.705Z,1478894895.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:16.109Z,1478894896.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:16.260Z,1478894896.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:16.502Z,1478894896.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:16.902Z,1478894896.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:16.968Z,1478894896.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:17.308Z,1478894897.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:17.701Z,1478894897.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:17.764Z,1478894897.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:18.105Z,1478894898.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:18.501Z,1478894898.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:18.561Z,1478894898.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:18.949Z,1478894898.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:18.973Z,1478894898.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:19.301Z,1478894899.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:19.705Z,1478894899.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:19.768Z,1478894899.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:20.098Z,1478894900.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:20.561Z,1478894900.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:20.565Z,1478894900.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:20.908Z,1478894900.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:20.984Z,1478894900.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:21.351Z,1478894901.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:21.722Z,1478894901.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:21.780Z,1478894901.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:22.116Z,1478894902.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:22.488Z,1478894902.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:22.577Z,1478894902.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:22.899Z,1478894902.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:22.988Z,1478894902.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:23.297Z,1478894903.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:23.692Z,1478894903.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:23.784Z,1478894903.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:24.095Z,1478894904.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:24.505Z,1478894904.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:24.580Z,1478894904.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:24.900Z,1478894904.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:25.056Z,1478894905.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:25.305Z,1478894905.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:25.695Z,1478894905.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:25.852Z,1478894905.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:26.096Z,1478894906.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:26.501Z,1478894906.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:26.648Z,1478894906.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:26.905Z,1478894906.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:27.301Z,1478894907.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:27.412Z,1478894907.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:27.701Z,1478894907.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:28.101Z,1478894908.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:28.208Z,1478894908.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:28.505Z,1478894908.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:28.901Z,1478894908.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:29.005Z,1478894909.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:29.315Z,1478894909.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:29.416Z,1478894909.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:29.710Z,1478894909.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:30.093Z,1478894910.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:30.212Z,1478894910.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:30.493Z,1478894910.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:30.901Z,1478894910.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:30.956Z,1478894910.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:31.295Z,1478894911.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:31.705Z,1478894911.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:31.752Z,1478894911.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:32.100Z,1478894912.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:32.514Z,1478894912.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:32.549Z,1478894912.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:32.908Z,1478894912.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:32.960Z,1478894912.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:33.305Z,1478894913.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:33.733Z,1478894913.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:33.756Z,1478894913.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:34.121Z,1478894914.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:34.522Z,1478894914.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:34.553Z,1478894914.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:34.922Z,1478894914.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:34.964Z,1478894914.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:35.306Z,1478894915.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:35.729Z,1478894915.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:35.760Z,1478894915.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:36.118Z,1478894916.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:36.525Z,1478894916.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:36.556Z,1478894916.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:36.897Z,1478894916.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:36.915Z,1478894916.915 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T20:08:36.919Z,1478894916.919 [Default:CheckIn:C.Wait] Stopped
2016-11-11T20:08:36.919Z,1478894916.919 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T20:08:36.919Z,1478894916.919 [Default:CheckIn:D] Running Loop=1
2016-11-11T20:08:36.964Z,1478894916.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:37.295Z,1478894917.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:37.304Z,1478894917.304 [Default:CheckIn:D] Stopped
2016-11-11T20:08:37.304Z,1478894917.304 [Default:CheckIn:E] Running Loop=1
2016-11-11T20:08:37.695Z,1478894917.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:37.704Z,1478894917.704 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 918.599870 min 
2016-11-11T20:08:37.704Z,1478894917.704 [Default:CheckIn:E] Stopped
2016-11-11T20:08:37.704Z,1478894917.704 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T20:08:37.705Z,1478894917.704 [Default:CheckIn] Stopped
2016-11-11T20:08:37.705Z,1478894917.705 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T20:08:37.705Z,1478894917.705 [Default:CheckIn](INFO): Running loop #89
2016-11-11T20:08:37.705Z,1478894917.705 [Default:CheckIn] Running Loop=89
2016-11-11T20:08:37.705Z,1478894917.705 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T20:08:37.705Z,1478894917.705 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T20:08:37.760Z,1478894917.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:38.105Z,1478894918.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:38.556Z,1478894918.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:39.036Z,1478894919.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:39.832Z,1478894919.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:40.628Z,1478894920.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:41.392Z,1478894921.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:41.483Z,1478894921.483 [NAL9602](INFO): Powering up
2016-11-11T20:08:41.516Z,1478894921.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:41.649Z,1478894921.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:42.017Z,1478894922.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:42.188Z,1478894922.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:42.418Z,1478894922.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:42.839Z,1478894922.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:42.985Z,1478894922.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:43.233Z,1478894923.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:43.404Z,1478894923.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:43.620Z,1478894923.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:44.033Z,1478894924.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:44.200Z,1478894924.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:44.435Z,1478894924.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:44.846Z,1478894924.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:44.920Z,1478894924.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:45.228Z,1478894925.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:45.625Z,1478894925.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:45.716Z,1478894925.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:46.031Z,1478894926.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:46.427Z,1478894926.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:46.513Z,1478894926.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:46.813Z,1478894926.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:46.924Z,1478894926.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:47.218Z,1478894927.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:47.614Z,1478894927.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:47.720Z,1478894927.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:48.028Z,1478894928.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:48.516Z,1478894928.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:48.564Z,1478894928.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:48.808Z,1478894928.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:48.940Z,1478894928.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:49.250Z,1478894929.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:49.646Z,1478894929.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:49.736Z,1478894929.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:50.058Z,1478894930.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:50.446Z,1478894930.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:50.533Z,1478894930.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:50.828Z,1478894930.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:50.946Z,1478894930.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:51.224Z,1478894931.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:51.628Z,1478894931.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:51.740Z,1478894931.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:52.037Z,1478894932.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:52.377Z,1478894932.377 [NAL9602](INFO): NAL9602 initialized
2016-11-11T20:08:52.433Z,1478894932.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:52.536Z,1478894932.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:52.827Z,1478894932.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:53.024Z,1478894933.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:53.177Z,1478894933.177 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T20:08:53.177Z,1478894933.177 [NAL9602] Data Fault, FailCount= 1
2016-11-11T20:08:53.177Z,1478894933.177 [NAL9602](ERROR): Data Fault
2016-11-11T20:08:53.241Z,1478894933.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:53.284Z,1478894933.284 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T20:08:53.576Z,1478894933.576 [NAL9602](INFO): Powering down
2016-11-11T20:08:53.619Z,1478894933.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:53.820Z,1478894933.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:54.023Z,1478894934.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:54.415Z,1478894934.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:54.461Z,1478894934.461 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T20:08:54.461Z,1478894934.461 [NAL9602] No Fault, FailCount= 1
2016-11-11T20:08:54.616Z,1478894934.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:54.818Z,1478894934.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:55.225Z,1478894935.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:55.368Z,1478894935.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:55.623Z,1478894935.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:56.020Z,1478894936.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:56.164Z,1478894936.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:56.425Z,1478894936.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:56.828Z,1478894936.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:56.961Z,1478894936.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:57.219Z,1478894937.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:57.372Z,1478894937.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:57.625Z,1478894937.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:58.023Z,1478894938.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:58.169Z,1478894938.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:58.433Z,1478894938.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:58.776Z,1478894938.776 [NAL9602](INFO): Powering up NAL9602
2016-11-11T20:08:58.834Z,1478894938.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:58.916Z,1478894938.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:08:59.220Z,1478894939.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:59.620Z,1478894939.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:08:59.712Z,1478894939.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:00.023Z,1478894940.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:00.423Z,1478894940.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:00.513Z,1478894940.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:00.832Z,1478894940.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:00.924Z,1478894940.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:01.236Z,1478894941.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:01.641Z,1478894941.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:01.720Z,1478894941.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:02.026Z,1478894942.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:02.516Z,1478894942.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:02.525Z,1478894942.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:02.829Z,1478894942.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:02.925Z,1478894942.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:03.224Z,1478894943.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:03.661Z,1478894943.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:03.720Z,1478894943.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:04.029Z,1478894944.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:04.483Z,1478894944.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:04.516Z,1478894944.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:04.875Z,1478894944.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:04.928Z,1478894944.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:05.230Z,1478894945.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:05.628Z,1478894945.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:05.725Z,1478894945.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:06.012Z,1478894946.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:06.414Z,1478894946.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:06.520Z,1478894946.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:06.829Z,1478894946.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:06.992Z,1478894946.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:07.240Z,1478894947.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:07.635Z,1478894947.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:07.788Z,1478894947.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:08.024Z,1478894948.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:08.433Z,1478894948.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:08.584Z,1478894948.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:08.841Z,1478894948.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:09.239Z,1478894949.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:09.352Z,1478894949.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:09.584Z,1478894949.584 [NAL9602](INFO): NAL9602 initialized
2016-11-11T20:09:09.647Z,1478894949.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:10.019Z,1478894950.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:10.148Z,1478894950.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:10.441Z,1478894950.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:10.825Z,1478894950.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:10.945Z,1478894950.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:11.223Z,1478894951.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:11.360Z,1478894951.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:11.622Z,1478894951.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:12.022Z,1478894952.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:12.156Z,1478894952.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:12.429Z,1478894952.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:12.840Z,1478894952.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:12.884Z,1478894952.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:13.244Z,1478894953.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:13.636Z,1478894953.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:13.680Z,1478894953.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:14.033Z,1478894954.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:14.476Z,1478894954.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:14.486Z,1478894954.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:14.817Z,1478894954.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:14.888Z,1478894954.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:15.229Z,1478894955.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:15.626Z,1478894955.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:15.684Z,1478894955.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:16.023Z,1478894956.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:16.420Z,1478894956.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:16.481Z,1478894956.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:16.881Z,1478894956.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:16.892Z,1478894956.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:17.236Z,1478894957.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:17.673Z,1478894957.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:17.692Z,1478894957.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:18.085Z,1478894958.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:18.488Z,1478894958.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:18.531Z,1478894958.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:18.865Z,1478894958.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:18.900Z,1478894958.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:19.246Z,1478894959.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:19.613Z,1478894959.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:19.696Z,1478894959.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:20.018Z,1478894960.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:20.415Z,1478894960.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:20.493Z,1478894960.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:20.831Z,1478894960.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:20.968Z,1478894960.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:21.240Z,1478894961.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:21.632Z,1478894961.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:21.764Z,1478894961.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:22.032Z,1478894962.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:22.444Z,1478894962.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:22.561Z,1478894962.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:22.875Z,1478894962.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:23.248Z,1478894963.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:23.340Z,1478894963.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:23.614Z,1478894963.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:24.015Z,1478894964.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:24.137Z,1478894964.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:24.424Z,1478894964.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:24.821Z,1478894964.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:24.933Z,1478894964.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:25.218Z,1478894965.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:25.344Z,1478894965.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:25.620Z,1478894965.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:26.020Z,1478894966.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:26.140Z,1478894966.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:26.428Z,1478894966.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:26.821Z,1478894966.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:26.872Z,1478894966.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:27.223Z,1478894967.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:27.623Z,1478894967.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:27.668Z,1478894967.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:28.032Z,1478894968.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:28.464Z,1478894968.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:28.484Z,1478894968.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:28.832Z,1478894968.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:28.876Z,1478894968.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:29.219Z,1478894969.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:29.612Z,1478894969.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:29.672Z,1478894969.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:30.017Z,1478894970.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:30.468Z,1478894970.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:30.500Z,1478894970.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:30.863Z,1478894970.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:30.880Z,1478894970.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:31.223Z,1478894971.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:31.666Z,1478894971.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:31.676Z,1478894971.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:32.031Z,1478894972.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:32.473Z,1478894972.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:32.510Z,1478894972.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:32.853Z,1478894972.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:32.880Z,1478894972.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:33.220Z,1478894973.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:33.670Z,1478894973.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:33.676Z,1478894973.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:34.066Z,1478894974.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:34.456Z,1478894974.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:34.472Z,1478894974.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:34.830Z,1478894974.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:34.948Z,1478894974.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:35.234Z,1478894975.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:35.637Z,1478894975.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:35.744Z,1478894975.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:36.037Z,1478894976.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:36.411Z,1478894976.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:36.540Z,1478894976.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:36.814Z,1478894976.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:37.231Z,1478894977.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:37.328Z,1478894977.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:37.681Z,1478894977.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:38.026Z,1478894978.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:38.124Z,1478894978.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:38.437Z,1478894978.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:38.921Z,1478894978.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:39.332Z,1478894979.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:40.128Z,1478894980.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:40.858Z,1478894980.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:41.652Z,1478894981.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:41.955Z,1478894981.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:42.078Z,1478894982.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:42.449Z,1478894982.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:42.513Z,1478894982.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:42.855Z,1478894982.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:42.880Z,1478894982.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:43.267Z,1478894983.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:43.659Z,1478894983.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:43.676Z,1478894983.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:44.076Z,1478894984.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:44.472Z,1478894984.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:44.505Z,1478894984.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:44.814Z,1478894984.814 [NAL9602](INFO): SBD MO Status=0, MOMSN=358, MT Status=0, MTMSN=0
2016-11-11T20:09:44.814Z,1478894984.814 [NAL9602](INFO): No messages in MT queue
2016-11-11T20:09:44.874Z,1478894984.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:44.884Z,1478894984.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:45.270Z,1478894985.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:45.680Z,1478894985.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:45.683Z,1478894985.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:46.117Z,1478894986.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:46.476Z,1478894986.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:46.538Z,1478894986.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:46.858Z,1478894986.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:46.884Z,1478894986.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:47.297Z,1478894987.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:47.659Z,1478894987.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:47.680Z,1478894987.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:48.093Z,1478894988.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:48.480Z,1478894988.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:48.557Z,1478894988.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:48.885Z,1478894988.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:48.952Z,1478894988.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:49.258Z,1478894989.258 [PNI_TCM](ERROR): CRC does not match. Expected:0x40447 got:0x6335
2016-11-11T20:09:49.285Z,1478894989.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:49.664Z,1478894989.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:49.748Z,1478894989.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:50.069Z,1478894990.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:50.504Z,1478894990.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:50.544Z,1478894990.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:50.927Z,1478894990.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:51.282Z,1478894991.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:51.300Z,1478894991.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:51.683Z,1478894991.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:52.072Z,1478894992.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:52.096Z,1478894992.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:52.462Z,1478894992.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:52.892Z,1478894992.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:52.921Z,1478894992.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:53.266Z,1478894993.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:53.304Z,1478894993.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:53.697Z,1478894993.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:54.056Z,1478894994.056 [PNI_TCM](ERROR): CRC does not match. Expected:0x36270 got:0x37547
2016-11-11T20:09:54.081Z,1478894994.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:54.100Z,1478894994.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:54.525Z,1478894994.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:54.844Z,1478894994.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:54.876Z,1478894994.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:55.281Z,1478894995.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:55.645Z,1478894995.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:55.663Z,1478894995.663 [PNI_TCM](ERROR): CRC does not match. Expected:0x38383 got:0x24238
2016-11-11T20:09:55.682Z,1478894995.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:56.124Z,1478894996.124 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:56.124Z,1478894996.124 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 286
2016-11-11T20:09:56.124Z,1478894996.124 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:09:56.131Z,1478894996.131 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:56.131Z,1478894996.131 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 286
2016-11-11T20:09:56.131Z,1478894996.131 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:09:56.136Z,1478894996.136 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:56.136Z,1478894996.136 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 286
2016-11-11T20:09:56.136Z,1478894996.136 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:09:56.158Z,1478894996.158 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:09:56.159Z,1478894996.159 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:09:56.187Z,1478894996.187 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:09:56.440Z,1478894996.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:56.555Z,1478894996.555 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:09:56.555Z,1478894996.555 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 286
2016-11-11T20:09:56.560Z,1478894996.560 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:09:56.560Z,1478894996.560 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 286
2016-11-11T20:09:56.560Z,1478894996.560 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:09:56.561Z,1478894996.560 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 286
2016-11-11T20:09:56.848Z,1478894996.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:56.882Z,1478894996.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:09:56.882Z,1478894996.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:09:56.882Z,1478894996.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:09:56.887Z,1478894996.887 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:09:56.888Z,1478894996.888 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:09:56.888Z,1478894996.888 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:09:56.889Z,1478894996.889 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:09:56.889Z,1478894996.889 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:09:56.889Z,1478894996.889 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:09:57.258Z,1478894997.258 [PNI_TCM](ERROR): CRC does not match. Expected:0x7424 got:0x43853
2016-11-11T20:09:57.292Z,1478894997.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:57.645Z,1478894997.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:57.678Z,1478894997.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:58.067Z,1478894998.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:58.440Z,1478894998.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:58.507Z,1478894998.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:58.852Z,1478894998.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:58.869Z,1478894998.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:59.240Z,1478894999.240 [PNI_TCM](ERROR): CRC does not match. Expected:0x33819 got:0x16913
2016-11-11T20:09:59.263Z,1478894999.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:09:59.648Z,1478894999.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:09:59.655Z,1478894999.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:00.062Z,1478895000.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:00.445Z,1478895000.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:00.496Z,1478895000.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:00.852Z,1478895000.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:00.929Z,1478895000.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:01.266Z,1478895001.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:01.648Z,1478895001.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:01.693Z,1478895001.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:02.052Z,1478895002.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:02.444Z,1478895002.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:02.576Z,1478895002.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:02.898Z,1478895002.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:02.908Z,1478895002.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:03.266Z,1478895003.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:03.678Z,1478895003.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:03.704Z,1478895003.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:04.069Z,1478895004.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:04.470Z,1478895004.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:04.504Z,1478895004.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:04.914Z,1478895004.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:05.257Z,1478895005.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:05.300Z,1478895005.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:05.681Z,1478895005.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:06.057Z,1478895006.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:06.096Z,1478895006.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:06.481Z,1478895006.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:06.892Z,1478895006.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:06.933Z,1478895006.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:07.277Z,1478895007.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:07.300Z,1478895007.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:07.666Z,1478895007.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:08.061Z,1478895008.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:08.096Z,1478895008.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:08.474Z,1478895008.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:08.792Z,1478895008.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:08.861Z,1478895008.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:09.261Z,1478895009.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:09.588Z,1478895009.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:09.669Z,1478895009.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:10.069Z,1478895010.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:10.385Z,1478895010.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:10.485Z,1478895010.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:10.797Z,1478895010.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:10.873Z,1478895010.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:11.289Z,1478895011.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:11.594Z,1478895011.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:11.662Z,1478895011.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:12.065Z,1478895012.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:12.428Z,1478895012.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:12.501Z,1478895012.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:12.836Z,1478895012.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:12.929Z,1478895012.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:13.275Z,1478895013.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:13.632Z,1478895013.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:13.650Z,1478895013.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:14.058Z,1478895014.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:14.428Z,1478895014.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:14.470Z,1478895014.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:14.836Z,1478895014.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:14.921Z,1478895014.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:15.271Z,1478895015.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:15.632Z,1478895015.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:15.701Z,1478895015.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:16.073Z,1478895016.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:16.428Z,1478895016.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:16.549Z,1478895016.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:16.881Z,1478895016.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:16.884Z,1478895016.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:17.268Z,1478895017.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:17.669Z,1478895017.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:17.680Z,1478895017.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:18.054Z,1478895018.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:18.476Z,1478895018.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:18.482Z,1478895018.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:18.900Z,1478895018.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:19.256Z,1478895019.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:19.267Z,1478895019.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:19.658Z,1478895019.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:20.052Z,1478895020.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:20.070Z,1478895020.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:20.460Z,1478895020.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:20.850Z,1478895020.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:20.925Z,1478895020.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:21.280Z,1478895021.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:21.291Z,1478895021.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:21.659Z,1478895021.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:22.065Z,1478895022.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:22.076Z,1478895022.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:22.458Z,1478895022.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:22.768Z,1478895022.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:22.859Z,1478895022.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:23.264Z,1478895023.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:23.564Z,1478895023.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:23.666Z,1478895023.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:24.105Z,1478895024.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:24.361Z,1478895024.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:24.497Z,1478895024.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:24.772Z,1478895024.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:24.859Z,1478895024.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:25.269Z,1478895025.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:25.568Z,1478895025.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:25.665Z,1478895025.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:26.073Z,1478895026.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:26.365Z,1478895026.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:26.464Z,1478895026.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:26.776Z,1478895026.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:26.860Z,1478895026.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:27.275Z,1478895027.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:27.572Z,1478895027.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:27.677Z,1478895027.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:28.078Z,1478895028.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:28.369Z,1478895028.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:28.459Z,1478895028.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:28.780Z,1478895028.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:28.874Z,1478895028.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:29.345Z,1478895029.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:29.576Z,1478895029.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:29.692Z,1478895029.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:30.073Z,1478895030.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:30.372Z,1478895030.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:30.518Z,1478895030.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:30.900Z,1478895030.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:30.906Z,1478895030.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:31.283Z,1478895031.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:31.684Z,1478895031.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:31.696Z,1478895031.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:32.057Z,1478895032.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:32.462Z,1478895032.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:32.492Z,1478895032.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:32.916Z,1478895032.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:33.244Z,1478895033.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:33.273Z,1478895033.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:33.678Z,1478895033.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:34.048Z,1478895034.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:34.069Z,1478895034.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:34.469Z,1478895034.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:34.845Z,1478895034.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:34.900Z,1478895034.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:35.265Z,1478895035.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:35.272Z,1478895035.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:35.687Z,1478895035.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:36.065Z,1478895036.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:36.068Z,1478895036.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:36.469Z,1478895036.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:36.748Z,1478895036.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:36.865Z,1478895036.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:37.264Z,1478895037.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:37.544Z,1478895037.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:37.668Z,1478895037.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:38.059Z,1478895038.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:38.341Z,1478895038.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:38.454Z,1478895038.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:38.752Z,1478895038.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:39.548Z,1478895039.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:40.345Z,1478895040.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:40.756Z,1478895040.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:41.552Z,1478895041.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:42.008Z,1478895042.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:42.179Z,1478895042.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:42.349Z,1478895042.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:42.515Z,1478895042.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:42.760Z,1478895042.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:42.910Z,1478895042.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:43.353Z,1478895043.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:43.556Z,1478895043.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:43.717Z,1478895043.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:44.156Z,1478895044.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:44.352Z,1478895044.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:44.511Z,1478895044.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:44.924Z,1478895044.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:44.945Z,1478895044.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:45.349Z,1478895045.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:45.714Z,1478895045.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:45.720Z,1478895045.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:46.114Z,1478895046.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:46.508Z,1478895046.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:46.517Z,1478895046.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:46.909Z,1478895046.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:47.200Z,1478895047.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:47.304Z,1478895047.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:47.721Z,1478895047.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:47.996Z,1478895047.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:48.118Z,1478895048.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:48.518Z,1478895048.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:48.793Z,1478895048.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:48.908Z,1478895048.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:49.204Z,1478895049.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:49.306Z,1478895049.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:49.709Z,1478895049.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:49.000Z,1478895050.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:50.122Z,1478895050.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:50.509Z,1478895050.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:50.728Z,1478895050.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:50.916Z,1478895050.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:51.325Z,1478895051.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:51.524Z,1478895051.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:51.720Z,1478895051.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:52.115Z,1478895052.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:52.321Z,1478895052.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:52.516Z,1478895052.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:52.732Z,1478895052.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:52.916Z,1478895052.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:53.313Z,1478895053.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:53.528Z,1478895053.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:53.737Z,1478895053.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:54.123Z,1478895054.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:54.325Z,1478895054.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:54.533Z,1478895054.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:54.736Z,1478895054.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:54.909Z,1478895054.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:55.305Z,1478895055.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:55.532Z,1478895055.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:55.715Z,1478895055.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:56.108Z,1478895056.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:56.331Z,1478895056.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:56.517Z,1478895056.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:56.744Z,1478895056.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:56.977Z,1478895056.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:57.333Z,1478895057.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:57.540Z,1478895057.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:57.752Z,1478895057.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:58.114Z,1478895058.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:58.339Z,1478895058.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:58.534Z,1478895058.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:58.828Z,1478895058.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:58.947Z,1478895058.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:59.321Z,1478895059.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:10:59.624Z,1478895059.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:10:59.718Z,1478895059.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:00.112Z,1478895060.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:00.420Z,1478895060.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:00.512Z,1478895060.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:00.925Z,1478895060.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:01.180Z,1478895061.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:01.313Z,1478895061.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:01.714Z,1478895061.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:01.976Z,1478895061.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:02.120Z,1478895062.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:02.521Z,1478895062.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:02.773Z,1478895062.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:02.921Z,1478895062.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:03.184Z,1478895063.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:03.317Z,1478895063.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:03.715Z,1478895063.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:03.980Z,1478895063.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:04.115Z,1478895064.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:04.512Z,1478895064.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:04.708Z,1478895064.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:04.926Z,1478895064.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:05.329Z,1478895065.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:05.505Z,1478895065.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:05.729Z,1478895065.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:06.121Z,1478895066.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:06.301Z,1478895066.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:06.525Z,1478895066.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:06.720Z,1478895066.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:06.905Z,1478895066.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:07.304Z,1478895067.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:07.517Z,1478895067.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:07.715Z,1478895067.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:08.117Z,1478895068.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:08.313Z,1478895068.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:08.521Z,1478895068.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:08.724Z,1478895068.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:08.910Z,1478895068.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:09.311Z,1478895069.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:09.520Z,1478895069.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:09.705Z,1478895069.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:10.112Z,1478895070.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:10.317Z,1478895070.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:10.517Z,1478895070.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:10.728Z,1478895070.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:10.969Z,1478895070.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:11.319Z,1478895071.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:11.524Z,1478895071.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:11.753Z,1478895071.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:12.116Z,1478895072.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:12.320Z,1478895072.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:12.542Z,1478895072.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:12.804Z,1478895072.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:12.933Z,1478895072.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:13.316Z,1478895073.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:13.600Z,1478895073.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:13.721Z,1478895073.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:14.129Z,1478895074.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:14.396Z,1478895074.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:14.529Z,1478895074.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:14.920Z,1478895074.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:15.160Z,1478895075.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:15.301Z,1478895075.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:15.701Z,1478895075.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:15.956Z,1478895075.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:16.106Z,1478895076.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:16.503Z,1478895076.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:16.753Z,1478895076.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:16.935Z,1478895076.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:17.164Z,1478895077.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:17.317Z,1478895077.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:17.725Z,1478895077.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:17.960Z,1478895077.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:18.113Z,1478895078.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:18.517Z,1478895078.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:18.684Z,1478895078.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:18.921Z,1478895078.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:19.316Z,1478895079.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:19.480Z,1478895079.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:19.726Z,1478895079.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:20.125Z,1478895080.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:20.277Z,1478895080.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:20.523Z,1478895080.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:20.688Z,1478895080.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:20.913Z,1478895080.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:21.324Z,1478895081.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:21.484Z,1478895081.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:21.698Z,1478895081.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:22.122Z,1478895082.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:22.281Z,1478895082.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:22.505Z,1478895082.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:22.692Z,1478895082.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:22.928Z,1478895082.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:23.332Z,1478895083.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:23.488Z,1478895083.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:23.711Z,1478895083.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:24.107Z,1478895084.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:24.285Z,1478895084.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:24.517Z,1478895084.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:24.696Z,1478895084.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:24.965Z,1478895084.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:25.316Z,1478895085.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:25.492Z,1478895085.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:25.719Z,1478895085.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:26.158Z,1478895086.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:26.288Z,1478895086.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:26.521Z,1478895086.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:26.780Z,1478895086.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:26.929Z,1478895086.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:27.326Z,1478895087.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:27.576Z,1478895087.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:27.716Z,1478895087.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:28.117Z,1478895088.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:28.372Z,1478895088.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:28.497Z,1478895088.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:28.927Z,1478895088.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:29.128Z,1478895089.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:29.325Z,1478895089.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:29.724Z,1478895089.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:29.924Z,1478895089.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:30.133Z,1478895090.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:30.509Z,1478895090.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:30.721Z,1478895090.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:30.904Z,1478895090.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:31.140Z,1478895091.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:31.306Z,1478895091.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:31.717Z,1478895091.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:31.936Z,1478895091.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:32.121Z,1478895092.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:32.514Z,1478895092.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:32.656Z,1478895092.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:32.956Z,1478895092.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:33.313Z,1478895093.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:33.452Z,1478895093.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:33.712Z,1478895093.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:34.117Z,1478895094.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:34.249Z,1478895094.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:34.513Z,1478895094.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:34.660Z,1478895094.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:34.924Z,1478895094.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:35.337Z,1478895095.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:35.456Z,1478895095.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:35.729Z,1478895095.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:36.116Z,1478895096.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:36.253Z,1478895096.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:36.517Z,1478895096.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:36.664Z,1478895096.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:36.921Z,1478895096.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:37.321Z,1478895097.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:37.460Z,1478895097.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:37.721Z,1478895097.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:38.127Z,1478895098.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:38.259Z,1478895098.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:38.522Z,1478895098.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:38.672Z,1478895098.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:39.468Z,1478895099.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:40.264Z,1478895100.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:40.748Z,1478895100.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:41.544Z,1478895101.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:41.921Z,1478895101.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:42.025Z,1478895102.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:42.340Z,1478895102.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:42.453Z,1478895102.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:42.811Z,1478895102.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:43.120Z,1478895103.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:43.297Z,1478895103.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:43.646Z,1478895103.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:43.916Z,1478895103.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:44.023Z,1478895104.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:44.466Z,1478895104.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:44.713Z,1478895104.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:44.844Z,1478895104.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:45.124Z,1478895105.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:45.246Z,1478895105.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:45.607Z,1478895105.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:45.920Z,1478895105.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:46.051Z,1478895106.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:46.465Z,1478895106.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:46.645Z,1478895106.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:46.826Z,1478895106.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:47.238Z,1478895107.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:47.440Z,1478895107.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:47.637Z,1478895107.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:48.030Z,1478895108.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:48.237Z,1478895108.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:48.410Z,1478895108.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:48.648Z,1478895108.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:48.825Z,1478895108.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:49.223Z,1478895109.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:49.444Z,1478895109.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:49.643Z,1478895109.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:50.070Z,1478895110.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:50.241Z,1478895110.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:50.435Z,1478895110.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:50.652Z,1478895110.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:50.820Z,1478895110.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:51.207Z,1478895111.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:51.448Z,1478895111.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:51.615Z,1478895111.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:52.027Z,1478895112.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:52.245Z,1478895112.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:52.414Z,1478895112.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:52.656Z,1478895112.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:52.834Z,1478895112.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:53.232Z,1478895113.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:53.452Z,1478895113.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:53.618Z,1478895113.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:54.000Z,1478895114.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:54.249Z,1478895114.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:54.442Z,1478895114.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:54.732Z,1478895114.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:54.809Z,1478895114.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:55.229Z,1478895115.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:55.528Z,1478895115.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:55.673Z,1478895115.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:56.066Z,1478895116.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:56.324Z,1478895116.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:56.442Z,1478895116.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:56.840Z,1478895116.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:57.104Z,1478895117.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:57.249Z,1478895117.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:57.610Z,1478895117.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:57.900Z,1478895117.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:58.062Z,1478895118.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:58.450Z,1478895118.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:58.697Z,1478895118.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:58.858Z,1478895118.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:59.108Z,1478895119.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:11:59.226Z,1478895119.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:59.633Z,1478895119.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:11:59.904Z,1478895119.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:00.052Z,1478895120.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:00.440Z,1478895120.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:00.612Z,1478895120.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:00.818Z,1478895120.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:01.222Z,1478895121.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:01.408Z,1478895121.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:01.633Z,1478895121.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:02.049Z,1478895122.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:02.205Z,1478895122.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:02.426Z,1478895122.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:02.616Z,1478895122.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:02.805Z,1478895122.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:03.229Z,1478895123.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:03.412Z,1478895123.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:03.617Z,1478895123.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:04.025Z,1478895124.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:04.209Z,1478895124.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:04.436Z,1478895124.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:04.640Z,1478895124.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:04.820Z,1478895124.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:05.233Z,1478895125.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:05.436Z,1478895125.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:05.637Z,1478895125.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:06.010Z,1478895126.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:06.232Z,1478895126.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:06.414Z,1478895126.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:06.641Z,1478895126.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:06.813Z,1478895126.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:07.223Z,1478895127.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:07.436Z,1478895127.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:07.629Z,1478895127.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:08.037Z,1478895128.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:08.233Z,1478895128.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:08.438Z,1478895128.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:08.700Z,1478895128.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:08.843Z,1478895128.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:09.215Z,1478895129.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:09.496Z,1478895129.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:09.623Z,1478895129.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:10.035Z,1478895130.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:10.292Z,1478895130.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:10.431Z,1478895130.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:10.886Z,1478895130.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:11.080Z,1478895131.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:11.238Z,1478895131.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:11.673Z,1478895131.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:11.876Z,1478895131.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:12.026Z,1478895132.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:12.442Z,1478895132.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:12.673Z,1478895132.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:12.849Z,1478895132.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:13.084Z,1478895133.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:13.239Z,1478895133.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:13.633Z,1478895133.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:13.882Z,1478895133.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:14.026Z,1478895134.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:14.451Z,1478895134.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:14.588Z,1478895134.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:14.849Z,1478895134.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:15.212Z,1478895135.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:15.386Z,1478895135.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:15.606Z,1478895135.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:16.019Z,1478895136.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:16.181Z,1478895136.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:16.414Z,1478895136.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:16.592Z,1478895136.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:16.825Z,1478895136.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:17.221Z,1478895137.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:17.388Z,1478895137.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:17.631Z,1478895137.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:18.009Z,1478895138.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:18.185Z,1478895138.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:18.417Z,1478895138.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:18.599Z,1478895138.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:18.814Z,1478895138.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:19.221Z,1478895139.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:19.396Z,1478895139.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:19.621Z,1478895139.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:20.034Z,1478895140.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:20.193Z,1478895140.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:20.423Z,1478895140.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:20.604Z,1478895140.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:20.803Z,1478895140.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:21.206Z,1478895141.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:21.400Z,1478895141.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:21.633Z,1478895141.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:22.017Z,1478895142.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:22.196Z,1478895142.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:22.414Z,1478895142.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:22.680Z,1478895142.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:22.814Z,1478895142.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:23.217Z,1478895143.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:23.476Z,1478895143.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:23.623Z,1478895143.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:24.029Z,1478895144.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:24.272Z,1478895144.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:24.416Z,1478895144.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:24.899Z,1478895144.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:25.040Z,1478895145.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:25.205Z,1478895145.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:25.635Z,1478895145.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:25.836Z,1478895145.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:26.015Z,1478895146.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:26.450Z,1478895146.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:26.633Z,1478895146.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:26.846Z,1478895146.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:27.048Z,1478895147.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:27.214Z,1478895147.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:27.617Z,1478895147.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:27.844Z,1478895147.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:28.006Z,1478895148.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:28.418Z,1478895148.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:28.568Z,1478895148.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:28.825Z,1478895148.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:29.225Z,1478895149.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:29.364Z,1478895149.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:29.618Z,1478895149.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:30.011Z,1478895150.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:30.160Z,1478895150.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:30.412Z,1478895150.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:30.600Z,1478895150.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:30.809Z,1478895150.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:31.205Z,1478895151.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:31.396Z,1478895151.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:31.614Z,1478895151.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:32.025Z,1478895152.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:32.193Z,1478895152.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:32.422Z,1478895152.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:32.604Z,1478895152.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:32.815Z,1478895152.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:33.213Z,1478895153.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:33.400Z,1478895153.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:33.610Z,1478895153.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:34.014Z,1478895154.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:34.196Z,1478895154.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:34.464Z,1478895154.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:34.604Z,1478895154.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:34.819Z,1478895154.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:35.218Z,1478895155.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:35.401Z,1478895155.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:35.621Z,1478895155.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:36.021Z,1478895156.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:36.196Z,1478895156.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:36.425Z,1478895156.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:36.660Z,1478895156.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:36.815Z,1478895156.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:37.210Z,1478895157.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:37.456Z,1478895157.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:37.613Z,1478895157.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:38.040Z,1478895158.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:38.252Z,1478895158.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:38.453Z,1478895158.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:38.855Z,1478895158.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:39.016Z,1478895159.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:39.812Z,1478895159.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:40.609Z,1478895160.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:41.024Z,1478895161.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:41.820Z,1478895161.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:42.419Z,1478895162.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:42.548Z,1478895162.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:42.574Z,1478895162.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:42.930Z,1478895162.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:43.306Z,1478895163.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:43.344Z,1478895163.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:43.729Z,1478895163.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:44.141Z,1478895164.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:44.170Z,1478895164.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:44.500Z,1478895164.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:44.584Z,1478895164.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:44.898Z,1478895164.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:45.303Z,1478895165.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:45.381Z,1478895165.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:45.713Z,1478895165.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:46.169Z,1478895166.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:46.176Z,1478895166.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:46.512Z,1478895166.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:46.588Z,1478895166.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:46.887Z,1478895166.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:47.293Z,1478895167.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:47.384Z,1478895167.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:47.715Z,1478895167.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:48.137Z,1478895168.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:48.180Z,1478895168.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:48.495Z,1478895168.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:48.588Z,1478895168.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:48.931Z,1478895168.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:49.305Z,1478895169.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:49.384Z,1478895169.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:49.692Z,1478895169.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:50.090Z,1478895170.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:50.180Z,1478895170.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:50.498Z,1478895170.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:50.648Z,1478895170.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:50.898Z,1478895170.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:51.303Z,1478895171.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:51.445Z,1478895171.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:51.709Z,1478895171.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:52.116Z,1478895172.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:52.240Z,1478895172.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:52.506Z,1478895172.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:52.909Z,1478895172.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:53.008Z,1478895173.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:53.289Z,1478895173.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:53.689Z,1478895173.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:53.805Z,1478895173.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:54.097Z,1478895174.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:54.501Z,1478895174.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:54.601Z,1478895174.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:54.907Z,1478895174.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:55.012Z,1478895175.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:55.322Z,1478895175.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:55.717Z,1478895175.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:55.808Z,1478895175.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:56.193Z,1478895176.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:56.542Z,1478895176.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:56.552Z,1478895176.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:56.894Z,1478895176.894 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:56.894Z,1478895176.894 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 287
2016-11-11T20:12:56.894Z,1478895176.894 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:12:56.901Z,1478895176.901 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:56.901Z,1478895176.901 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 287
2016-11-11T20:12:56.901Z,1478895176.901 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:12:56.903Z,1478895176.903 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:56.903Z,1478895176.903 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 287
2016-11-11T20:12:56.903Z,1478895176.903 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:12:56.918Z,1478895176.918 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:12:56.918Z,1478895176.918 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:12:56.918Z,1478895176.918 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:12:57.319Z,1478895177.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:12:57.319Z,1478895177.319 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 287
2016-11-11T20:12:57.320Z,1478895177.320 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:12:57.320Z,1478895177.320 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 287
2016-11-11T20:12:57.321Z,1478895177.321 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:12:57.321Z,1478895177.321 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 287
2016-11-11T20:12:57.348Z,1478895177.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:57.760Z,1478895177.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:12:57.760Z,1478895177.760 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:12:57.761Z,1478895177.761 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:12:57.778Z,1478895177.778 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:12:57.778Z,1478895177.778 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:12:57.779Z,1478895177.779 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:12:57.779Z,1478895177.779 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:12:57.780Z,1478895177.780 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:12:57.780Z,1478895177.780 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:12:58.148Z,1478895178.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:58.174Z,1478895178.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:58.534Z,1478895178.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:58.556Z,1478895178.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:58.941Z,1478895178.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:59.295Z,1478895179.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:12:59.352Z,1478895179.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:12:59.705Z,1478895179.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:00.148Z,1478895180.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:00.167Z,1478895180.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:00.489Z,1478895180.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:00.556Z,1478895180.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:00.921Z,1478895180.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:01.293Z,1478895181.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:01.352Z,1478895181.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:01.699Z,1478895181.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:02.148Z,1478895182.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:02.170Z,1478895182.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:02.512Z,1478895182.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:02.560Z,1478895182.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:02.894Z,1478895182.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:03.301Z,1478895183.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:03.356Z,1478895183.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:03.706Z,1478895183.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:04.103Z,1478895184.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:04.152Z,1478895184.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:04.503Z,1478895184.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:04.616Z,1478895184.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:04.899Z,1478895184.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:05.301Z,1478895185.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:05.412Z,1478895185.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:05.699Z,1478895185.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:06.101Z,1478895186.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:06.208Z,1478895186.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:06.494Z,1478895186.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:06.917Z,1478895186.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:06.980Z,1478895186.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:07.306Z,1478895187.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:07.714Z,1478895187.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:07.776Z,1478895187.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:08.126Z,1478895188.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:08.496Z,1478895188.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:08.572Z,1478895188.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:08.901Z,1478895188.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:08.984Z,1478895188.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:09.300Z,1478895189.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:09.705Z,1478895189.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:09.780Z,1478895189.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:10.155Z,1478895190.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:10.516Z,1478895190.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:10.536Z,1478895190.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:10.941Z,1478895190.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:11.302Z,1478895191.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:11.332Z,1478895191.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:11.689Z,1478895191.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:12.133Z,1478895192.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:12.172Z,1478895192.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:12.494Z,1478895192.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:12.544Z,1478895192.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:12.901Z,1478895192.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:13.290Z,1478895193.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:13.340Z,1478895193.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:13.715Z,1478895193.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:14.136Z,1478895194.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:14.182Z,1478895194.182 [BPC1](ERROR): Failed to receive battery data
2016-11-11T20:13:14.182Z,1478895194.182 [BPC1] Communications Fault, FailCount= 1
2016-11-11T20:13:14.183Z,1478895194.182 [BPC1](ERROR): Communications Fault
2016-11-11T20:13:14.215Z,1478895194.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:14.268Z,1478895194.268 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T20:13:14.521Z,1478895194.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:14.544Z,1478895194.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:14.901Z,1478895194.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:15.310Z,1478895195.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:15.340Z,1478895195.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:15.355Z,1478895195.355 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:13:15.355Z,1478895195.355 [BPC1] No Fault, FailCount= 1
2016-11-11T20:13:15.761Z,1478895195.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:16.136Z,1478895196.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:16.170Z,1478895196.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:16.527Z,1478895196.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:16.544Z,1478895196.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:16.906Z,1478895196.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:17.302Z,1478895197.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:17.340Z,1478895197.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:17.694Z,1478895197.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:18.104Z,1478895198.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:18.136Z,1478895198.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:18.502Z,1478895198.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:18.600Z,1478895198.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:18.917Z,1478895198.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:19.284Z,1478895199.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:19.396Z,1478895199.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:19.711Z,1478895199.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:20.113Z,1478895200.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:20.192Z,1478895200.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:20.557Z,1478895200.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:20.894Z,1478895200.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:20.956Z,1478895200.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:21.301Z,1478895201.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:21.705Z,1478895201.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:21.752Z,1478895201.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:22.097Z,1478895202.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:22.548Z,1478895202.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:22.587Z,1478895202.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:22.905Z,1478895202.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:22.960Z,1478895202.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:23.310Z,1478895203.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:23.696Z,1478895203.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:23.756Z,1478895203.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:24.148Z,1478895204.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:24.513Z,1478895204.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:24.525Z,1478895204.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:24.889Z,1478895204.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:25.320Z,1478895205.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:25.359Z,1478895205.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:25.708Z,1478895205.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:26.116Z,1478895206.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:26.158Z,1478895206.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:26.507Z,1478895206.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:26.528Z,1478895206.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:26.934Z,1478895206.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:27.316Z,1478895207.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:27.331Z,1478895207.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:27.721Z,1478895207.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:28.128Z,1478895208.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:28.170Z,1478895208.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:28.513Z,1478895208.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:28.536Z,1478895208.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:28.940Z,1478895208.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:29.332Z,1478895209.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:29.361Z,1478895209.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:29.726Z,1478895209.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:30.132Z,1478895210.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:30.178Z,1478895210.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:30.517Z,1478895210.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:30.540Z,1478895210.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:30.898Z,1478895210.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:31.310Z,1478895211.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:31.336Z,1478895211.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:31.711Z,1478895211.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:32.117Z,1478895212.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:32.152Z,1478895212.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:32.517Z,1478895212.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:32.584Z,1478895212.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:32.889Z,1478895212.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:33.311Z,1478895213.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:33.380Z,1478895213.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:33.719Z,1478895213.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:34.121Z,1478895214.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:34.176Z,1478895214.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:34.560Z,1478895214.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:34.901Z,1478895214.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:34.956Z,1478895214.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:35.309Z,1478895215.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:35.721Z,1478895215.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:35.752Z,1478895215.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:36.117Z,1478895216.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:36.548Z,1478895216.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:36.561Z,1478895216.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:36.902Z,1478895216.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:36.960Z,1478895216.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:37.312Z,1478895217.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:37.717Z,1478895217.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:37.744Z,1478895217.744 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T20:08:37.7Z
2016-11-11T20:13:37.744Z,1478895217.744 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T20:13:37.745Z,1478895217.745 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T20:13:37.756Z,1478895217.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:38.132Z,1478895218.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:38.469Z,1478895218.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:38.977Z,1478895218.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:39.098Z,1478895219.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:39.266Z,1478895219.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:40.061Z,1478895220.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:40.480Z,1478895220.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:41.276Z,1478895221.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:42.073Z,1478895222.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:42.484Z,1478895222.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:42.732Z,1478895222.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:42.784Z,1478895222.784 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0356.lzma
2016-11-11T20:13:42.845Z,1478895222.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:43.258Z,1478895223.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:43.288Z,1478895223.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:43.577Z,1478895223.578 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0356.lzma.bak
2016-11-11T20:13:43.578Z,1478895223.578 [DataOverHttps](INFO): SBD MOMSN=4555724
2016-11-11T20:13:43.649Z,1478895223.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:44.084Z,1478895224.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:44.492Z,1478895224.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:44.958Z,1478895224.958 [NAL9602](INFO): Powering down
2016-11-11T20:13:45.034Z,1478895225.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:45.173Z,1478895225.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:45.288Z,1478895225.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:46.084Z,1478895226.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:46.548Z,1478895226.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:47.344Z,1478895227.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:48.140Z,1478895228.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:48.720Z,1478895228.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:48.854Z,1478895228.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:48.916Z,1478895228.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:49.197Z,1478895229.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:49.592Z,1478895229.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:49.712Z,1478895229.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:50.005Z,1478895230.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:50.393Z,1478895230.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:50.508Z,1478895230.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:50.920Z,1478895230.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:51.716Z,1478895231.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:52.432Z,1478895232.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:53.228Z,1478895233.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:53.737Z,1478895233.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:53.815Z,1478895233.815 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20161111T044527/Express0357.lzma
2016-11-11T20:13:53.889Z,1478895233.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:54.028Z,1478895234.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:54.251Z,1478895234.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:54.448Z,1478895234.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:54.606Z,1478895234.606 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0357.lzma.bak
2016-11-11T20:13:54.606Z,1478895234.606 [DataOverHttps](INFO): SBD MOMSN=4555726
2016-11-11T20:13:54.675Z,1478895234.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:55.244Z,1478895235.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:55.926Z,1478895235.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:55.935Z,1478895235.935 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T20:13:55.935Z,1478895235.935 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T20:13:55.935Z,1478895235.935 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T20:13:56.041Z,1478895236.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:56.097Z,1478895236.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:56.452Z,1478895236.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:57.248Z,1478895237.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:58.044Z,1478895238.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:58.452Z,1478895238.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:59.248Z,1478895239.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:13:59.606Z,1478895239.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:13:59.733Z,1478895239.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:00.044Z,1478895240.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:00.158Z,1478895240.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:00.553Z,1478895240.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:00.772Z,1478895240.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:00.894Z,1478895240.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:01.338Z,1478895241.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:01.568Z,1478895241.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:01.709Z,1478895241.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:02.161Z,1478895242.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:02.364Z,1478895242.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:02.530Z,1478895242.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:02.896Z,1478895242.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:02.945Z,1478895242.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:03.301Z,1478895243.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:03.692Z,1478895243.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:03.701Z,1478895243.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:04.105Z,1478895244.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:04.488Z,1478895244.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:04.552Z,1478895244.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:04.897Z,1478895244.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:04.912Z,1478895244.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:05.292Z,1478895245.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:05.691Z,1478895245.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:05.716Z,1478895245.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:06.110Z,1478895246.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:06.396Z,1478895246.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:06.509Z,1478895246.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:06.895Z,1478895246.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:07.192Z,1478895247.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:07.301Z,1478895247.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:07.701Z,1478895247.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:07.989Z,1478895247.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:08.101Z,1478895248.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:08.400Z,1478895248.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:08.504Z,1478895248.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:08.906Z,1478895248.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:09.196Z,1478895249.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:09.301Z,1478895249.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:09.705Z,1478895249.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:09.993Z,1478895249.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:10.106Z,1478895250.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:10.404Z,1478895250.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:10.498Z,1478895250.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:10.905Z,1478895250.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:11.200Z,1478895251.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:11.297Z,1478895251.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:11.702Z,1478895251.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:11.997Z,1478895251.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:12.101Z,1478895252.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:12.412Z,1478895252.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:12.515Z,1478895252.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:12.904Z,1478895252.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:13.208Z,1478895253.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:13.308Z,1478895253.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:13.731Z,1478895253.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:14.004Z,1478895254.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:14.174Z,1478895254.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:14.493Z,1478895254.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:14.532Z,1478895254.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:14.973Z,1478895254.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:15.309Z,1478895255.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:15.328Z,1478895255.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:15.697Z,1478895255.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:16.122Z,1478895256.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:16.136Z,1478895256.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:16.544Z,1478895256.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:16.856Z,1478895256.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:16.932Z,1478895256.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:17.333Z,1478895257.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:17.652Z,1478895257.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:17.701Z,1478895257.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:18.101Z,1478895258.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:18.456Z,1478895258.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:18.560Z,1478895258.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:18.908Z,1478895258.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:18.916Z,1478895258.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:19.301Z,1478895259.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:19.701Z,1478895259.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:19.704Z,1478895259.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:20.100Z,1478895260.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:20.380Z,1478895260.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:20.502Z,1478895260.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:20.894Z,1478895260.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:21.176Z,1478895261.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:21.302Z,1478895261.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:21.701Z,1478895261.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:21.981Z,1478895261.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:22.104Z,1478895262.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:22.400Z,1478895262.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:22.502Z,1478895262.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:22.904Z,1478895262.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:23.196Z,1478895263.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:23.301Z,1478895263.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:23.701Z,1478895263.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:23.993Z,1478895263.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:24.109Z,1478895264.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:24.404Z,1478895264.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:24.501Z,1478895264.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:24.901Z,1478895264.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:25.200Z,1478895265.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:25.305Z,1478895265.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:25.705Z,1478895265.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:25.996Z,1478895265.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:26.101Z,1478895266.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:26.404Z,1478895266.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:26.509Z,1478895266.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:26.897Z,1478895266.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:27.200Z,1478895267.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:27.298Z,1478895267.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:27.704Z,1478895267.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:27.996Z,1478895267.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:28.189Z,1478895268.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:28.498Z,1478895268.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:28.516Z,1478895268.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:28.901Z,1478895268.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:29.312Z,1478895269.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:29.321Z,1478895269.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:29.708Z,1478895269.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:30.108Z,1478895270.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:30.109Z,1478895270.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:30.517Z,1478895270.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:30.828Z,1478895270.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:30.898Z,1478895270.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:31.358Z,1478895271.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:31.624Z,1478895271.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:31.760Z,1478895271.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:32.100Z,1478895272.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:32.421Z,1478895272.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:32.506Z,1478895272.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:32.836Z,1478895272.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:32.902Z,1478895272.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:33.302Z,1478895273.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:33.632Z,1478895273.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:33.697Z,1478895273.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:34.114Z,1478895274.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:34.352Z,1478895274.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:34.497Z,1478895274.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:34.897Z,1478895274.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:35.148Z,1478895275.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:35.293Z,1478895275.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:35.692Z,1478895275.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:35.945Z,1478895275.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:36.093Z,1478895276.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:36.356Z,1478895276.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:36.488Z,1478895276.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:36.888Z,1478895276.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:37.152Z,1478895277.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:37.291Z,1478895277.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:37.692Z,1478895277.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:37.949Z,1478895277.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:38.097Z,1478895278.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:38.360Z,1478895278.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:38.549Z,1478895278.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:38.892Z,1478895278.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:39.156Z,1478895279.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:39.297Z,1478895279.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:39.688Z,1478895279.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:39.953Z,1478895279.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:40.101Z,1478895280.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:40.364Z,1478895280.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:40.488Z,1478895280.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:40.892Z,1478895280.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:41.160Z,1478895281.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:41.288Z,1478895281.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:41.692Z,1478895281.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:41.956Z,1478895281.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:42.108Z,1478895282.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:42.444Z,1478895282.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:42.517Z,1478895282.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:42.888Z,1478895282.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:43.240Z,1478895283.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:43.292Z,1478895283.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:43.739Z,1478895283.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:44.036Z,1478895284.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:44.097Z,1478895284.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:44.521Z,1478895284.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:44.804Z,1478895284.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:44.893Z,1478895284.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:45.328Z,1478895285.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:45.600Z,1478895285.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:45.717Z,1478895285.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:46.092Z,1478895286.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:46.401Z,1478895286.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:46.514Z,1478895286.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:46.812Z,1478895286.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:46.897Z,1478895286.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:47.291Z,1478895287.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:47.608Z,1478895287.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:47.693Z,1478895287.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:48.093Z,1478895288.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:48.332Z,1478895288.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:48.488Z,1478895288.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:48.892Z,1478895288.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:49.128Z,1478895289.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:49.293Z,1478895289.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:49.692Z,1478895289.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:49.925Z,1478895289.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:50.093Z,1478895290.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:50.336Z,1478895290.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:50.497Z,1478895290.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:50.922Z,1478895290.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:51.132Z,1478895291.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:51.292Z,1478895291.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:51.693Z,1478895291.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:51.929Z,1478895291.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:52.101Z,1478895292.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:52.340Z,1478895292.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:52.497Z,1478895292.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:52.889Z,1478895292.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:53.136Z,1478895293.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:53.301Z,1478895293.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:53.720Z,1478895293.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:53.933Z,1478895293.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:54.101Z,1478895294.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:54.344Z,1478895294.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:54.517Z,1478895294.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:54.897Z,1478895294.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:55.140Z,1478895295.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:55.305Z,1478895295.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:55.705Z,1478895295.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:55.936Z,1478895295.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:56.110Z,1478895296.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:56.424Z,1478895296.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:56.539Z,1478895296.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:14:57.220Z,1478895297.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:58.016Z,1478895298.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:58.788Z,1478895298.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:59.584Z,1478895299.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:14:59.898Z,1478895299.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:00.032Z,1478895300.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:00.380Z,1478895300.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:00.470Z,1478895300.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:00.793Z,1478895300.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:00.853Z,1478895300.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:01.220Z,1478895301.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:01.588Z,1478895301.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:01.652Z,1478895301.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:02.025Z,1478895302.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:02.308Z,1478895302.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:02.457Z,1478895302.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:02.825Z,1478895302.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:03.104Z,1478895303.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:03.230Z,1478895303.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:03.623Z,1478895303.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:03.903Z,1478895303.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:04.026Z,1478895304.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:04.316Z,1478895304.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:04.434Z,1478895304.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:04.820Z,1478895304.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:05.112Z,1478895305.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:05.237Z,1478895305.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:05.629Z,1478895305.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:05.909Z,1478895305.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:06.031Z,1478895306.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:06.356Z,1478895306.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:06.429Z,1478895306.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:06.823Z,1478895306.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:07.154Z,1478895307.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:07.229Z,1478895307.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:07.629Z,1478895307.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:07.948Z,1478895307.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:08.034Z,1478895308.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:08.360Z,1478895308.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:08.430Z,1478895308.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:08.833Z,1478895308.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:09.157Z,1478895309.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:09.229Z,1478895309.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:09.612Z,1478895309.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:09.952Z,1478895309.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:10.058Z,1478895310.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:10.424Z,1478895310.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:10.438Z,1478895310.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:10.828Z,1478895310.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:11.220Z,1478895311.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:11.234Z,1478895311.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:11.651Z,1478895311.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:12.024Z,1478895312.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:12.033Z,1478895312.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:12.435Z,1478895312.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:12.760Z,1478895312.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:12.821Z,1478895312.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:13.265Z,1478895313.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:13.556Z,1478895313.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:13.632Z,1478895313.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:14.038Z,1478895314.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:14.353Z,1478895314.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:14.434Z,1478895314.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:14.764Z,1478895314.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:14.829Z,1478895314.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:15.250Z,1478895315.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:15.560Z,1478895315.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:15.621Z,1478895315.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:16.065Z,1478895316.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:16.290Z,1478895316.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:16.457Z,1478895316.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:16.819Z,1478895316.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:17.084Z,1478895317.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:17.218Z,1478895317.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:17.619Z,1478895317.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:17.881Z,1478895317.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:18.025Z,1478895318.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:18.304Z,1478895318.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:18.422Z,1478895318.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:18.821Z,1478895318.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:19.100Z,1478895319.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:19.219Z,1478895319.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:19.618Z,1478895319.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:19.897Z,1478895319.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:20.028Z,1478895320.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:20.308Z,1478895320.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:20.420Z,1478895320.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:20.825Z,1478895320.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:21.104Z,1478895321.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:21.225Z,1478895321.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:21.619Z,1478895321.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:21.902Z,1478895321.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:22.027Z,1478895322.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:22.312Z,1478895322.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:22.430Z,1478895322.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:22.822Z,1478895322.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:23.108Z,1478895323.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:23.220Z,1478895323.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:23.629Z,1478895323.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:23.904Z,1478895323.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:24.054Z,1478895324.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:24.436Z,1478895324.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:24.440Z,1478895324.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:24.817Z,1478895324.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:25.223Z,1478895325.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:25.236Z,1478895325.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:25.621Z,1478895325.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:26.020Z,1478895326.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:26.032Z,1478895326.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:26.414Z,1478895326.414 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T20:15:26.414Z,1478895326.414 [BPC1] Data Fault, FailCount= 1
2016-11-11T20:15:26.414Z,1478895326.414 [BPC1](ERROR): Data Fault
2016-11-11T20:15:26.426Z,1478895326.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:26.462Z,1478895326.462 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T20:15:26.740Z,1478895326.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:26.827Z,1478895326.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:27.229Z,1478895327.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:27.536Z,1478895327.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:27.625Z,1478895327.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:27.646Z,1478895327.646 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:15:27.646Z,1478895327.646 [BPC1] No Fault, FailCount= 1
2016-11-11T20:15:28.085Z,1478895328.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:28.333Z,1478895328.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:28.439Z,1478895328.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:28.744Z,1478895328.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:28.845Z,1478895328.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:29.228Z,1478895329.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:29.540Z,1478895329.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:29.632Z,1478895329.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:30.028Z,1478895330.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:30.280Z,1478895330.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:30.425Z,1478895330.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:30.832Z,1478895330.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:31.076Z,1478895331.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:31.228Z,1478895331.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:31.632Z,1478895331.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:31.873Z,1478895331.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:32.032Z,1478895332.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:32.284Z,1478895332.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:32.431Z,1478895332.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:32.832Z,1478895332.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:33.080Z,1478895333.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:33.239Z,1478895333.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:33.612Z,1478895333.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:33.877Z,1478895333.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:34.041Z,1478895334.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:34.289Z,1478895334.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:34.425Z,1478895334.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:34.820Z,1478895334.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:35.084Z,1478895335.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:35.225Z,1478895335.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:35.620Z,1478895335.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:35.881Z,1478895335.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:36.029Z,1478895336.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:36.292Z,1478895336.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:36.429Z,1478895336.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:36.829Z,1478895336.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:37.088Z,1478895337.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:37.229Z,1478895337.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:37.632Z,1478895337.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:37.884Z,1478895337.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:38.042Z,1478895338.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:38.368Z,1478895338.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:38.435Z,1478895338.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:38.828Z,1478895338.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:39.165Z,1478895339.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:39.253Z,1478895339.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:39.645Z,1478895339.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:39.960Z,1478895339.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:40.043Z,1478895340.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:40.458Z,1478895340.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:40.732Z,1478895340.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:40.816Z,1478895340.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:41.242Z,1478895341.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:41.530Z,1478895341.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:41.665Z,1478895341.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:42.025Z,1478895342.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:42.325Z,1478895342.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:42.425Z,1478895342.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:42.736Z,1478895342.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:42.832Z,1478895342.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:43.219Z,1478895343.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:43.532Z,1478895343.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:43.628Z,1478895343.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:44.026Z,1478895344.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:44.244Z,1478895344.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:44.422Z,1478895344.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:44.828Z,1478895344.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:45.040Z,1478895345.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:45.230Z,1478895345.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:45.622Z,1478895345.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:45.837Z,1478895345.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:46.027Z,1478895346.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:46.248Z,1478895346.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:46.418Z,1478895346.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:46.833Z,1478895346.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:47.044Z,1478895347.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:47.217Z,1478895347.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:47.617Z,1478895347.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:47.849Z,1478895347.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:48.021Z,1478895348.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:48.268Z,1478895348.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:48.419Z,1478895348.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:48.825Z,1478895348.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:49.064Z,1478895349.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:49.224Z,1478895349.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:49.623Z,1478895349.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:49.861Z,1478895349.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:50.028Z,1478895350.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:50.272Z,1478895350.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:50.422Z,1478895350.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:50.833Z,1478895350.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:51.068Z,1478895351.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:51.232Z,1478895351.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:51.632Z,1478895351.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:51.867Z,1478895351.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:52.034Z,1478895352.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:52.348Z,1478895352.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:52.445Z,1478895352.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:52.817Z,1478895352.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:53.144Z,1478895353.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:53.221Z,1478895353.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:53.665Z,1478895353.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:53.940Z,1478895353.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:54.029Z,1478895354.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:54.421Z,1478895354.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:54.700Z,1478895354.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:54.825Z,1478895354.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:55.257Z,1478895355.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:55.498Z,1478895355.498 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:55.620Z,1478895355.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:56.051Z,1478895356.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:56.293Z,1478895356.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:56.468Z,1478895356.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:56.704Z,1478895356.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:56.822Z,1478895356.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:15:57.501Z,1478895357.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:58.236Z,1478895358.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:59.032Z,1478895359.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:15:59.830Z,1478895359.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:00.240Z,1478895360.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:00.335Z,1478895360.335 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:00.335Z,1478895360.335 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 288
2016-11-11T20:16:00.335Z,1478895360.335 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:16:00.341Z,1478895360.341 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:00.342Z,1478895360.342 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 288
2016-11-11T20:16:00.342Z,1478895360.342 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:16:00.344Z,1478895360.344 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:00.344Z,1478895360.344 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 288
2016-11-11T20:16:00.344Z,1478895360.344 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:16:00.387Z,1478895360.387 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:16:00.387Z,1478895360.387 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:16:00.388Z,1478895360.388 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:16:00.506Z,1478895360.506 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:16:00.506Z,1478895360.506 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 288
2016-11-11T20:16:00.512Z,1478895360.512 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:16:00.512Z,1478895360.512 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 288
2016-11-11T20:16:00.512Z,1478895360.512 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:16:00.512Z,1478895360.513 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 288
2016-11-11T20:16:00.857Z,1478895360.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:16:00.858Z,1478895360.858 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:16:00.858Z,1478895360.858 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:16:00.863Z,1478895360.862 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:16:00.863Z,1478895360.863 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:16:00.863Z,1478895360.863 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:16:00.864Z,1478895360.864 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:16:00.864Z,1478895360.864 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:16:00.865Z,1478895360.865 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:16:01.036Z,1478895361.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:01.262Z,1478895361.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:01.654Z,1478895361.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:01.836Z,1478895361.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:02.059Z,1478895362.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:02.256Z,1478895362.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:02.453Z,1478895362.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:02.854Z,1478895362.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:03.052Z,1478895363.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:03.265Z,1478895363.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:03.664Z,1478895363.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:03.848Z,1478895363.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:04.061Z,1478895364.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:04.256Z,1478895364.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:04.465Z,1478895364.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:04.864Z,1478895364.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:05.052Z,1478895365.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:05.264Z,1478895365.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:05.664Z,1478895365.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:05.848Z,1478895365.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:06.049Z,1478895366.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:06.328Z,1478895366.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:06.453Z,1478895366.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:06.857Z,1478895366.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:07.124Z,1478895367.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:07.297Z,1478895367.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:07.657Z,1478895367.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:07.920Z,1478895367.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:08.054Z,1478895368.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:08.478Z,1478895368.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:08.676Z,1478895368.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:08.854Z,1478895368.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:09.289Z,1478895369.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:09.472Z,1478895369.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:09.644Z,1478895369.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:10.082Z,1478895370.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:10.269Z,1478895370.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:10.485Z,1478895370.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:10.680Z,1478895370.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:10.848Z,1478895370.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:11.248Z,1478895371.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:11.476Z,1478895371.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:11.657Z,1478895371.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:12.051Z,1478895372.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:12.192Z,1478895372.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:12.451Z,1478895372.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:12.857Z,1478895372.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:12.988Z,1478895372.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:13.257Z,1478895373.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:13.309Z,1478895373.309 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T20:16:13.660Z,1478895373.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:13.785Z,1478895373.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:14.068Z,1478895374.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:14.196Z,1478895374.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:14.449Z,1478895374.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:14.844Z,1478895374.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:14.992Z,1478895374.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:15.273Z,1478895375.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:15.653Z,1478895375.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:15.789Z,1478895375.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:16.051Z,1478895376.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:16.216Z,1478895376.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:16.461Z,1478895376.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:16.868Z,1478895376.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:17.012Z,1478895377.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:17.252Z,1478895377.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:17.664Z,1478895377.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:17.809Z,1478895377.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:18.056Z,1478895378.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:18.224Z,1478895378.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:18.457Z,1478895378.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:18.860Z,1478895378.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:19.021Z,1478895379.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:19.261Z,1478895379.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:19.654Z,1478895379.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:19.816Z,1478895379.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:20.065Z,1478895380.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:20.304Z,1478895380.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:20.461Z,1478895380.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:20.881Z,1478895380.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:21.100Z,1478895381.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:21.249Z,1478895381.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:21.647Z,1478895381.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:21.896Z,1478895381.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:22.052Z,1478895382.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:22.493Z,1478895382.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:22.644Z,1478895382.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:22.857Z,1478895382.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:23.251Z,1478895383.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:23.440Z,1478895383.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:23.695Z,1478895383.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:24.054Z,1478895384.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:24.237Z,1478895384.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:24.496Z,1478895384.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:24.648Z,1478895384.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:24.901Z,1478895384.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:25.249Z,1478895385.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:25.444Z,1478895385.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:25.644Z,1478895385.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:26.049Z,1478895386.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:26.172Z,1478895386.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:26.448Z,1478895386.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:26.852Z,1478895386.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:26.969Z,1478895386.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:27.257Z,1478895387.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:27.651Z,1478895387.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:27.765Z,1478895387.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:28.051Z,1478895388.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:28.184Z,1478895388.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:28.457Z,1478895388.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:28.857Z,1478895388.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:28.982Z,1478895388.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:29.256Z,1478895389.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:29.657Z,1478895389.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:29.777Z,1478895389.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:30.059Z,1478895390.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:30.192Z,1478895390.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:30.461Z,1478895390.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:30.863Z,1478895390.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:30.988Z,1478895390.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:31.264Z,1478895391.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:31.656Z,1478895391.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:31.785Z,1478895391.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:32.069Z,1478895392.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:32.196Z,1478895392.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:32.449Z,1478895392.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:32.849Z,1478895392.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:32.992Z,1478895392.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:33.251Z,1478895393.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:33.651Z,1478895393.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:33.788Z,1478895393.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:34.051Z,1478895394.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:34.273Z,1478895394.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:34.461Z,1478895394.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:34.851Z,1478895394.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:35.068Z,1478895395.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:35.255Z,1478895395.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:35.705Z,1478895395.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:35.864Z,1478895395.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:36.061Z,1478895396.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:36.452Z,1478895396.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:36.624Z,1478895396.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:36.878Z,1478895396.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:37.262Z,1478895397.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:37.420Z,1478895397.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:37.700Z,1478895397.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:38.060Z,1478895398.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:38.217Z,1478895398.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:38.498Z,1478895398.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:38.628Z,1478895398.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:38.901Z,1478895398.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:39.263Z,1478895399.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:39.424Z,1478895399.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:39.664Z,1478895399.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:40.069Z,1478895400.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:40.168Z,1478895400.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:40.449Z,1478895400.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:40.849Z,1478895400.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:40.964Z,1478895400.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:41.244Z,1478895401.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:41.649Z,1478895401.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:41.761Z,1478895401.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:42.061Z,1478895402.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:42.172Z,1478895402.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:42.464Z,1478895402.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:42.863Z,1478895402.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:42.968Z,1478895402.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:43.266Z,1478895403.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:43.660Z,1478895403.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:43.766Z,1478895403.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:44.057Z,1478895404.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:44.176Z,1478895404.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:44.460Z,1478895404.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:44.851Z,1478895404.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:44.972Z,1478895404.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:45.261Z,1478895405.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:45.658Z,1478895405.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:45.768Z,1478895405.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:46.062Z,1478895406.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:46.177Z,1478895406.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:46.474Z,1478895406.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:46.862Z,1478895406.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:46.972Z,1478895406.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:47.270Z,1478895407.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:47.669Z,1478895407.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:47.768Z,1478895407.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:48.080Z,1478895408.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:48.244Z,1478895408.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:48.474Z,1478895408.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:48.865Z,1478895408.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:49.040Z,1478895409.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:49.334Z,1478895409.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:49.676Z,1478895409.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:49.836Z,1478895409.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:50.078Z,1478895410.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:50.474Z,1478895410.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:50.616Z,1478895410.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:50.857Z,1478895410.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:51.317Z,1478895411.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:51.412Z,1478895411.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:51.667Z,1478895411.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:52.090Z,1478895412.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:52.208Z,1478895412.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:52.477Z,1478895412.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:52.620Z,1478895412.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:52.881Z,1478895412.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:53.301Z,1478895413.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:53.416Z,1478895413.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:53.657Z,1478895413.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:54.087Z,1478895414.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:54.148Z,1478895414.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:54.456Z,1478895414.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:54.894Z,1478895414.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:54.944Z,1478895414.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:55.257Z,1478895415.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:55.652Z,1478895415.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:55.740Z,1478895415.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:56.062Z,1478895416.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:56.168Z,1478895416.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:56.452Z,1478895416.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:56.861Z,1478895416.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:16:56.965Z,1478895416.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:57.760Z,1478895417.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:58.168Z,1478895418.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:58.964Z,1478895418.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:16:59.760Z,1478895419.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:00.169Z,1478895420.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:00.964Z,1478895420.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:01.761Z,1478895421.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:02.221Z,1478895422.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:02.612Z,1478895422.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:02.806Z,1478895422.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:03.016Z,1478895423.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:03.163Z,1478895423.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:03.566Z,1478895423.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:03.812Z,1478895423.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:03.990Z,1478895423.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:04.396Z,1478895424.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:04.576Z,1478895424.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:04.765Z,1478895424.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:05.206Z,1478895425.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:05.372Z,1478895425.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:05.570Z,1478895425.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:05.970Z,1478895425.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:06.169Z,1478895426.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:06.374Z,1478895426.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:06.585Z,1478895426.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:06.746Z,1478895426.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:07.190Z,1478895427.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:07.380Z,1478895427.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:07.596Z,1478895427.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:07.973Z,1478895427.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:08.116Z,1478895428.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:08.374Z,1478895428.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:08.750Z,1478895428.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:08.912Z,1478895428.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:09.153Z,1478895429.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:09.569Z,1478895429.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:09.709Z,1478895429.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:09.962Z,1478895429.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:10.120Z,1478895430.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:10.361Z,1478895430.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:10.776Z,1478895430.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:10.917Z,1478895430.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:11.166Z,1478895431.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:11.569Z,1478895431.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:11.713Z,1478895431.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:11.974Z,1478895431.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:12.125Z,1478895432.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:12.362Z,1478895432.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:12.769Z,1478895432.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:12.920Z,1478895432.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:13.169Z,1478895433.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:13.561Z,1478895433.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:13.717Z,1478895433.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:13.950Z,1478895433.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:14.132Z,1478895434.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:14.357Z,1478895434.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:14.738Z,1478895434.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:14.929Z,1478895434.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:15.154Z,1478895435.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:15.582Z,1478895435.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:15.724Z,1478895435.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:15.982Z,1478895435.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:16.200Z,1478895436.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:16.353Z,1478895436.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:16.788Z,1478895436.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:16.996Z,1478895436.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:17.154Z,1478895437.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:17.557Z,1478895437.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:17.792Z,1478895437.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:17.970Z,1478895437.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:18.398Z,1478895438.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:18.608Z,1478895438.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:18.738Z,1478895438.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:19.147Z,1478895439.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:19.404Z,1478895439.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:19.581Z,1478895439.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:19.952Z,1478895439.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:20.200Z,1478895440.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:20.344Z,1478895440.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:20.608Z,1478895440.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:20.786Z,1478895440.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:21.150Z,1478895441.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:21.404Z,1478895441.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:21.573Z,1478895441.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:21.956Z,1478895441.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:22.092Z,1478895442.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:22.390Z,1478895442.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:22.754Z,1478895442.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:22.888Z,1478895442.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:23.154Z,1478895443.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:23.554Z,1478895443.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:23.685Z,1478895443.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:23.947Z,1478895443.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:24.096Z,1478895444.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:24.353Z,1478895444.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:24.769Z,1478895444.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:24.892Z,1478895444.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:25.157Z,1478895445.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:25.553Z,1478895445.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:25.688Z,1478895445.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:25.949Z,1478895445.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:26.342Z,1478895446.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:26.484Z,1478895446.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:26.743Z,1478895446.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:27.150Z,1478895447.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:27.280Z,1478895447.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:27.543Z,1478895447.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:27.943Z,1478895447.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:28.076Z,1478895448.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:28.356Z,1478895448.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:28.754Z,1478895448.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:28.873Z,1478895448.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:29.146Z,1478895449.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:29.545Z,1478895449.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:29.668Z,1478895449.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:29.953Z,1478895449.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:30.356Z,1478895450.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:30.464Z,1478895450.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:30.757Z,1478895450.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:31.169Z,1478895451.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:31.260Z,1478895451.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:31.560Z,1478895451.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:31.964Z,1478895451.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:32.056Z,1478895452.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:32.364Z,1478895452.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:32.738Z,1478895452.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:32.852Z,1478895452.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:33.167Z,1478895453.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:33.573Z,1478895453.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:33.648Z,1478895453.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:33.941Z,1478895453.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:34.389Z,1478895454.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:34.444Z,1478895454.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:34.742Z,1478895454.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:35.178Z,1478895455.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:35.240Z,1478895455.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:35.550Z,1478895455.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:35.966Z,1478895455.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:36.036Z,1478895456.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:36.381Z,1478895456.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:36.753Z,1478895456.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:36.832Z,1478895456.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:37.238Z,1478895457.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:37.556Z,1478895457.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:37.592Z,1478895457.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:37.953Z,1478895457.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:38.000Z,1478895458.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:38.349Z,1478895458.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:38.408Z,1478895458.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:38.742Z,1478895458.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:38.816Z,1478895458.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:39.149Z,1478895459.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:39.224Z,1478895459.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:39.549Z,1478895459.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:39.633Z,1478895459.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:39.944Z,1478895459.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:40.044Z,1478895460.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:40.357Z,1478895460.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:40.452Z,1478895460.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:40.791Z,1478895460.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:41.154Z,1478895461.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:41.248Z,1478895461.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:41.553Z,1478895461.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:41.941Z,1478895461.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:42.045Z,1478895462.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:42.341Z,1478895462.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:42.456Z,1478895462.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:42.739Z,1478895462.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:43.145Z,1478895463.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:43.253Z,1478895463.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:43.539Z,1478895463.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:43.947Z,1478895463.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:44.048Z,1478895464.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:44.349Z,1478895464.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:44.456Z,1478895464.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:44.754Z,1478895464.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:45.142Z,1478895465.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:45.252Z,1478895465.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:45.542Z,1478895465.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:45.944Z,1478895465.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:46.048Z,1478895466.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:46.350Z,1478895466.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:46.521Z,1478895466.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:46.762Z,1478895466.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:47.149Z,1478895467.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:47.316Z,1478895467.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:47.549Z,1478895467.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:47.949Z,1478895467.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:48.113Z,1478895468.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:48.346Z,1478895468.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:48.524Z,1478895468.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:48.769Z,1478895468.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:49.156Z,1478895469.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:49.320Z,1478895469.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:49.570Z,1478895469.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:49.947Z,1478895469.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:50.044Z,1478895470.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:50.370Z,1478895470.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:50.777Z,1478895470.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:50.840Z,1478895470.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:51.153Z,1478895471.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:51.552Z,1478895471.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:51.637Z,1478895471.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:51.949Z,1478895471.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:52.048Z,1478895472.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:52.350Z,1478895472.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:52.758Z,1478895472.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:52.844Z,1478895472.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:53.146Z,1478895473.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:53.548Z,1478895473.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:53.641Z,1478895473.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:53.964Z,1478895473.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:54.052Z,1478895474.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:54.361Z,1478895474.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:54.741Z,1478895474.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:54.848Z,1478895474.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:55.149Z,1478895475.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:55.543Z,1478895475.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:55.646Z,1478895475.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:55.969Z,1478895475.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:56.056Z,1478895476.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:56.354Z,1478895476.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:56.746Z,1478895476.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:56.852Z,1478895476.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:57.150Z,1478895477.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:17:57.648Z,1478895477.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:58.140Z,1478895478.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:58.936Z,1478895478.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:17:59.732Z,1478895479.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:00.496Z,1478895480.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:00.611Z,1478895480.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:00.749Z,1478895480.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:01.121Z,1478895481.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:01.292Z,1478895481.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:01.516Z,1478895481.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:01.916Z,1478895481.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:02.089Z,1478895482.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:02.329Z,1478895482.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:02.508Z,1478895482.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:02.745Z,1478895482.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:03.125Z,1478895483.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:03.304Z,1478895483.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:03.528Z,1478895483.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:03.946Z,1478895483.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:04.024Z,1478895484.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:04.321Z,1478895484.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:04.743Z,1478895484.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:04.820Z,1478895484.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:05.154Z,1478895485.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:05.517Z,1478895485.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:05.617Z,1478895485.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:05.918Z,1478895485.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:06.032Z,1478895486.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:06.326Z,1478895486.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:06.721Z,1478895486.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:06.828Z,1478895486.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:07.123Z,1478895487.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:07.517Z,1478895487.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:07.625Z,1478895487.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:07.933Z,1478895487.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:08.036Z,1478895488.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:08.335Z,1478895488.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:08.713Z,1478895488.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:08.832Z,1478895488.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:09.108Z,1478895489.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:09.513Z,1478895489.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:09.629Z,1478895489.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:09.921Z,1478895489.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:10.040Z,1478895490.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:10.315Z,1478895490.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:10.721Z,1478895490.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:10.836Z,1478895490.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:11.121Z,1478895491.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:11.515Z,1478895491.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:11.632Z,1478895491.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:11.916Z,1478895491.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:12.132Z,1478895492.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:12.326Z,1478895492.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:12.717Z,1478895492.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:12.928Z,1478895492.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:13.125Z,1478895493.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:13.519Z,1478895493.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:13.724Z,1478895493.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:13.927Z,1478895493.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:14.324Z,1478895494.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:14.468Z,1478895494.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:14.717Z,1478895494.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:15.118Z,1478895495.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:15.264Z,1478895495.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:15.529Z,1478895495.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:15.917Z,1478895495.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:16.061Z,1478895496.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:16.317Z,1478895496.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:16.472Z,1478895496.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:16.721Z,1478895496.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:17.123Z,1478895497.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:17.269Z,1478895497.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:17.629Z,1478895497.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:17.933Z,1478895497.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:18.012Z,1478895498.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:18.342Z,1478895498.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:18.714Z,1478895498.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:18.808Z,1478895498.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:19.143Z,1478895499.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:19.544Z,1478895499.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:19.605Z,1478895499.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:19.918Z,1478895499.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:20.020Z,1478895500.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:20.325Z,1478895500.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:20.721Z,1478895500.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:20.816Z,1478895500.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:21.115Z,1478895501.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:21.525Z,1478895501.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:21.612Z,1478895501.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:21.928Z,1478895501.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:22.024Z,1478895502.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:22.324Z,1478895502.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:22.708Z,1478895502.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:22.821Z,1478895502.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:23.113Z,1478895503.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:23.514Z,1478895503.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:23.616Z,1478895503.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:23.916Z,1478895503.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:24.028Z,1478895504.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:24.317Z,1478895504.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:24.717Z,1478895504.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:24.824Z,1478895504.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:25.122Z,1478895505.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:25.525Z,1478895505.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:25.620Z,1478895505.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:25.916Z,1478895505.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:26.333Z,1478895506.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:26.416Z,1478895506.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:26.724Z,1478895506.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:27.120Z,1478895507.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:27.212Z,1478895507.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:27.525Z,1478895507.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:27.928Z,1478895507.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:28.010Z,1478895508.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:28.328Z,1478895508.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:28.444Z,1478895508.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:28.728Z,1478895508.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:29.128Z,1478895509.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:29.240Z,1478895509.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:29.528Z,1478895509.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:29.928Z,1478895509.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:30.037Z,1478895510.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:30.328Z,1478895510.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:30.448Z,1478895510.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:30.720Z,1478895510.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:31.132Z,1478895511.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:31.244Z,1478895511.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:31.530Z,1478895511.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:31.941Z,1478895511.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:31.988Z,1478895511.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:32.320Z,1478895512.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:32.745Z,1478895512.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:32.784Z,1478895512.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:33.124Z,1478895513.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:33.578Z,1478895513.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:33.581Z,1478895513.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:33.954Z,1478895513.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:33.996Z,1478895513.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:34.316Z,1478895514.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:34.726Z,1478895514.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:34.792Z,1478895514.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:35.118Z,1478895515.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:35.524Z,1478895515.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:35.589Z,1478895515.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:35.925Z,1478895515.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:35.000Z,1478895516.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:36.312Z,1478895516.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:36.712Z,1478895516.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:36.796Z,1478895516.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:37.121Z,1478895517.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:37.515Z,1478895517.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:37.592Z,1478895517.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:37.928Z,1478895517.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:38.000Z,1478895518.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:38.321Z,1478895518.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:38.737Z,1478895518.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:38.796Z,1478895518.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:39.109Z,1478895519.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:39.513Z,1478895519.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:39.592Z,1478895519.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:39.942Z,1478895519.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:40.068Z,1478895520.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:40.313Z,1478895520.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:40.714Z,1478895520.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:40.864Z,1478895520.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:41.120Z,1478895521.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:41.514Z,1478895521.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:41.660Z,1478895521.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:41.922Z,1478895521.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:42.321Z,1478895522.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:42.432Z,1478895522.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:42.719Z,1478895522.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:43.129Z,1478895523.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:43.228Z,1478895523.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:43.521Z,1478895523.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:43.928Z,1478895523.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:44.024Z,1478895524.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:44.329Z,1478895524.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:44.436Z,1478895524.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:44.713Z,1478895524.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:45.116Z,1478895525.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:45.233Z,1478895525.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:45.586Z,1478895525.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:45.919Z,1478895525.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:45.964Z,1478895525.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:46.370Z,1478895526.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:46.721Z,1478895526.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:46.760Z,1478895526.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:47.134Z,1478895527.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:47.557Z,1478895527.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:47.578Z,1478895527.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:47.942Z,1478895527.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:47.996Z,1478895527.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:48.354Z,1478895528.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:48.715Z,1478895528.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:48.793Z,1478895528.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:49.121Z,1478895529.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:49.588Z,1478895529.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:49.597Z,1478895529.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:49.921Z,1478895529.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:49.996Z,1478895529.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:50.324Z,1478895530.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:50.726Z,1478895530.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:50.792Z,1478895530.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:51.118Z,1478895531.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:51.588Z,1478895531.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:51.601Z,1478895531.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:51.920Z,1478895531.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:51.996Z,1478895531.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:52.315Z,1478895532.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:52.721Z,1478895532.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:52.792Z,1478895532.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:53.121Z,1478895533.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:53.520Z,1478895533.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:53.589Z,1478895533.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:53.929Z,1478895533.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:54.064Z,1478895534.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:54.328Z,1478895534.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:54.720Z,1478895534.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:54.860Z,1478895534.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:55.107Z,1478895535.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:55.536Z,1478895535.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:55.657Z,1478895535.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:55.908Z,1478895535.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:56.312Z,1478895536.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:56.349Z,1478895536.349 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T20:18:56.349Z,1478895536.349 [Default:CheckIn:C.Wait] Stopped
2016-11-11T20:18:56.350Z,1478895536.349 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T20:18:56.350Z,1478895536.350 [Default:CheckIn:D] Running Loop=1
2016-11-11T20:18:56.404Z,1478895536.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:56.711Z,1478895536.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:56.720Z,1478895536.720 [Default:CheckIn:D] Stopped
2016-11-11T20:18:56.720Z,1478895536.720 [Default:CheckIn:E] Running Loop=1
2016-11-11T20:18:57.123Z,1478895537.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:57.148Z,1478895537.148 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 928.923503 min 
2016-11-11T20:18:57.148Z,1478895537.148 [Default:CheckIn:E] Stopped
2016-11-11T20:18:57.148Z,1478895537.148 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T20:18:57.148Z,1478895537.148 [Default:CheckIn] Stopped
2016-11-11T20:18:57.148Z,1478895537.148 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T20:18:57.149Z,1478895537.149 [Default:CheckIn](INFO): Running loop #90
2016-11-11T20:18:57.149Z,1478895537.149 [Default:CheckIn] Running Loop=90
2016-11-11T20:18:57.149Z,1478895537.149 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T20:18:57.149Z,1478895537.149 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T20:18:57.200Z,1478895537.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:57.516Z,1478895537.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:18:57.997Z,1478895537.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:58.412Z,1478895538.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:59.208Z,1478895539.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:18:59.932Z,1478895539.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:00.728Z,1478895540.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:00.966Z,1478895540.966 [NAL9602](INFO): Powering up
2016-11-11T20:19:01.085Z,1478895541.085 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:01.085Z,1478895541.085 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 289
2016-11-11T20:19:01.085Z,1478895541.085 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:19:01.092Z,1478895541.092 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:01.092Z,1478895541.092 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 289
2016-11-11T20:19:01.092Z,1478895541.092 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:19:01.104Z,1478895541.104 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:01.104Z,1478895541.104 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 289
2016-11-11T20:19:01.104Z,1478895541.104 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:19:01.126Z,1478895541.126 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:19:01.127Z,1478895541.127 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:19:01.127Z,1478895541.127 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:19:01.258Z,1478895541.258 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:19:01.258Z,1478895541.258 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 289
2016-11-11T20:19:01.263Z,1478895541.263 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:19:01.263Z,1478895541.263 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 289
2016-11-11T20:19:01.264Z,1478895541.264 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:19:01.264Z,1478895541.264 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 289
2016-11-11T20:19:01.525Z,1478895541.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:01.652Z,1478895541.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:19:01.652Z,1478895541.652 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:19:01.653Z,1478895541.653 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:19:01.658Z,1478895541.658 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:19:01.658Z,1478895541.658 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:19:01.658Z,1478895541.658 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:19:01.659Z,1478895541.659 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:19:01.660Z,1478895541.660 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:19:01.660Z,1478895541.660 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:19:01.936Z,1478895541.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:02.005Z,1478895542.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:02.433Z,1478895542.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:02.732Z,1478895542.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:02.837Z,1478895542.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:03.205Z,1478895543.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:03.529Z,1478895543.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:03.614Z,1478895543.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:03.944Z,1478895543.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:04.010Z,1478895544.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:04.408Z,1478895544.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:04.740Z,1478895544.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:04.787Z,1478895544.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:05.215Z,1478895545.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:05.537Z,1478895545.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:05.613Z,1478895545.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:05.952Z,1478895545.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:05.997Z,1478895545.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:06.401Z,1478895546.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:06.748Z,1478895546.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:06.795Z,1478895546.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:07.195Z,1478895547.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:07.580Z,1478895547.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:07.694Z,1478895547.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:08.007Z,1478895548.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:08.052Z,1478895548.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:08.394Z,1478895548.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:08.810Z,1478895548.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:08.848Z,1478895548.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:09.211Z,1478895549.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:09.586Z,1478895549.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:09.644Z,1478895549.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:10.062Z,1478895550.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:10.387Z,1478895550.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:10.392Z,1478895550.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:10.788Z,1478895550.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:11.188Z,1478895551.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:11.199Z,1478895551.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:11.604Z,1478895551.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:11.953Z,1478895551.954 [NAL9602](INFO): NAL9602 initialized
2016-11-11T20:19:11.985Z,1478895551.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:12.045Z,1478895552.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:12.412Z,1478895552.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:12.428Z,1478895552.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:12.754Z,1478895552.754 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T20:19:12.754Z,1478895552.754 [NAL9602] Data Fault, FailCount= 1
2016-11-11T20:19:12.754Z,1478895552.754 [NAL9602](ERROR): Data Fault
2016-11-11T20:19:12.793Z,1478895552.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:12.850Z,1478895552.850 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T20:19:13.160Z,1478895553.160 [NAL9602](INFO): Powering down
2016-11-11T20:19:13.197Z,1478895553.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:13.224Z,1478895553.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:13.605Z,1478895553.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:13.914Z,1478895553.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:13.996Z,1478895553.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:14.024Z,1478895554.024 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T20:19:14.024Z,1478895554.024 [NAL9602] No Fault, FailCount= 1
2016-11-11T20:19:14.433Z,1478895554.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:14.708Z,1478895554.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:14.795Z,1478895554.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:15.231Z,1478895555.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:15.505Z,1478895555.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:15.602Z,1478895555.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:15.916Z,1478895555.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:16.000Z,1478895556.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:16.422Z,1478895556.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:16.712Z,1478895556.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:16.797Z,1478895556.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:17.217Z,1478895557.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:17.509Z,1478895557.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:17.639Z,1478895557.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:17.920Z,1478895557.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:17.000Z,1478895558.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:18.357Z,1478895558.357 [NAL9602](INFO): Powering up NAL9602
2016-11-11T20:19:18.412Z,1478895558.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:18.716Z,1478895558.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:18.804Z,1478895558.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:19.200Z,1478895559.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:19.513Z,1478895559.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:19.602Z,1478895559.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:19.926Z,1478895559.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:19.989Z,1478895559.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:20.388Z,1478895560.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:20.720Z,1478895560.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:20.797Z,1478895560.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:21.191Z,1478895561.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:21.516Z,1478895561.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:21.657Z,1478895561.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:22.000Z,1478895562.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:22.036Z,1478895562.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:22.405Z,1478895562.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:22.800Z,1478895562.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:22.832Z,1478895562.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:23.201Z,1478895563.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:23.583Z,1478895563.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:23.628Z,1478895563.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:24.041Z,1478895564.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:24.388Z,1478895564.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:24.393Z,1478895564.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:24.796Z,1478895564.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:25.184Z,1478895565.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:25.194Z,1478895565.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:25.593Z,1478895565.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:25.980Z,1478895565.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:26.034Z,1478895566.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:26.409Z,1478895566.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:26.420Z,1478895566.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:26.789Z,1478895566.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:27.193Z,1478895567.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:27.216Z,1478895567.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:27.590Z,1478895567.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:27.892Z,1478895567.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:27.998Z,1478895567.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:28.393Z,1478895568.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:28.688Z,1478895568.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:28.791Z,1478895568.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:29.209Z,1478895569.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:29.485Z,1478895569.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:29.553Z,1478895569.553 [NAL9602](INFO): NAL9602 initialized
2016-11-11T20:19:29.653Z,1478895569.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:29.896Z,1478895569.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:29.994Z,1478895569.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:30.403Z,1478895570.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:30.692Z,1478895570.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:30.842Z,1478895570.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:31.202Z,1478895571.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:31.489Z,1478895571.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:31.638Z,1478895571.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:31.904Z,1478895571.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:32.034Z,1478895572.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:32.402Z,1478895572.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:32.700Z,1478895572.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:32.793Z,1478895572.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:33.201Z,1478895573.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:33.497Z,1478895573.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:33.601Z,1478895573.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:33.908Z,1478895573.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:33.993Z,1478895573.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:34.401Z,1478895574.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:34.704Z,1478895574.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:34.798Z,1478895574.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:35.210Z,1478895575.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:35.500Z,1478895575.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:35.672Z,1478895575.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:35.984Z,1478895575.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:36.040Z,1478895576.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:36.389Z,1478895576.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:36.789Z,1478895576.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:36.836Z,1478895576.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:37.190Z,1478895577.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:37.593Z,1478895577.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:37.632Z,1478895577.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:38.030Z,1478895578.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:38.340Z,1478895578.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:38.404Z,1478895578.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:38.792Z,1478895578.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:39.136Z,1478895579.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:39.200Z,1478895579.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:39.597Z,1478895579.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:39.933Z,1478895579.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:40.022Z,1478895580.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:40.344Z,1478895580.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:40.410Z,1478895580.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:40.800Z,1478895580.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:41.140Z,1478895581.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:41.204Z,1478895581.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:41.604Z,1478895581.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:41.868Z,1478895581.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:42.001Z,1478895582.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:42.400Z,1478895582.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:42.664Z,1478895582.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:42.810Z,1478895582.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:43.204Z,1478895583.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:43.461Z,1478895583.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:43.602Z,1478895583.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:43.872Z,1478895583.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:44.033Z,1478895584.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:44.421Z,1478895584.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:44.668Z,1478895584.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:44.791Z,1478895584.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:45.197Z,1478895585.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:45.465Z,1478895585.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:45.641Z,1478895585.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:45.876Z,1478895585.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:45.000Z,1478895586.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:46.429Z,1478895586.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:46.672Z,1478895586.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:46.826Z,1478895586.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:47.192Z,1478895587.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:47.469Z,1478895587.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:47.601Z,1478895587.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:47.884Z,1478895587.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:47.993Z,1478895587.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:48.392Z,1478895588.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:48.680Z,1478895588.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:48.795Z,1478895588.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:49.191Z,1478895589.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:49.476Z,1478895589.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:49.636Z,1478895589.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:50.001Z,1478895590.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:50.272Z,1478895590.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:50.394Z,1478895590.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:50.802Z,1478895590.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:51.068Z,1478895591.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:51.205Z,1478895591.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:51.601Z,1478895591.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:51.864Z,1478895591.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:52.001Z,1478895592.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:52.320Z,1478895592.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:52.401Z,1478895592.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:52.801Z,1478895592.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:53.116Z,1478895593.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:53.200Z,1478895593.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:53.597Z,1478895593.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:53.913Z,1478895593.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:53.954Z,1478895593.954 [NAL9602](INFO): SBD MO Status=2, MOMSN=359, MT Status=2, MTMSN=0
2016-11-11T20:19:53.954Z,1478895593.954 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T20:19:54.016Z,1478895594.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:54.324Z,1478895594.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:54.409Z,1478895594.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:54.785Z,1478895594.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:55.120Z,1478895595.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:55.188Z,1478895595.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:55.597Z,1478895595.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:55.864Z,1478895595.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:56.005Z,1478895596.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:56.401Z,1478895596.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:56.660Z,1478895596.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:56.797Z,1478895596.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:57.206Z,1478895597.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:57.457Z,1478895597.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:57.600Z,1478895597.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:19:57.868Z,1478895597.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:58.664Z,1478895598.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:59.461Z,1478895599.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:19:59.872Z,1478895599.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:00.668Z,1478895600.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:01.207Z,1478895601.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:01.342Z,1478895601.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:01.465Z,1478895601.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:01.747Z,1478895601.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:01.876Z,1478895601.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:02.124Z,1478895602.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:02.525Z,1478895602.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:02.672Z,1478895602.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:02.933Z,1478895602.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:03.297Z,1478895603.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:03.468Z,1478895603.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:03.724Z,1478895603.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:03.948Z,1478895603.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:04.127Z,1478895604.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:04.497Z,1478895604.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:04.744Z,1478895604.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:04.901Z,1478895604.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:05.303Z,1478895605.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:05.540Z,1478895605.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:05.714Z,1478895605.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:06.111Z,1478895606.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:06.296Z,1478895606.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:06.513Z,1478895606.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:06.907Z,1478895606.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:07.092Z,1478895607.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:07.307Z,1478895607.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:07.706Z,1478895607.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:07.889Z,1478895607.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:08.106Z,1478895608.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:08.316Z,1478895608.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:08.517Z,1478895608.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:08.913Z,1478895608.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:09.112Z,1478895609.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:09.313Z,1478895609.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:09.705Z,1478895609.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:09.828Z,1478895609.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:10.129Z,1478895610.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:10.531Z,1478895610.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:10.624Z,1478895610.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:10.925Z,1478895610.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:11.324Z,1478895611.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:11.421Z,1478895611.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:11.710Z,1478895611.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:11.836Z,1478895611.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:12.109Z,1478895612.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:12.510Z,1478895612.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:12.632Z,1478895612.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:12.918Z,1478895612.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:13.314Z,1478895613.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:13.429Z,1478895613.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:13.724Z,1478895613.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:13.840Z,1478895613.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:14.102Z,1478895614.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:14.501Z,1478895614.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:14.636Z,1478895614.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:15.005Z,1478895615.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:15.310Z,1478895615.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:15.433Z,1478895615.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:15.713Z,1478895615.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:15.844Z,1478895615.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:16.138Z,1478895616.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:16.502Z,1478895616.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:16.640Z,1478895616.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:16.937Z,1478895616.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:17.331Z,1478895617.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:17.438Z,1478895617.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:17.715Z,1478895617.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:17.928Z,1478895617.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:18.104Z,1478895618.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:18.505Z,1478895618.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:18.724Z,1478895618.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:18.925Z,1478895618.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:19.314Z,1478895619.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:19.520Z,1478895619.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:19.717Z,1478895619.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:20.125Z,1478895620.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:20.276Z,1478895620.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:20.517Z,1478895620.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:20.901Z,1478895620.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:21.072Z,1478895621.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:21.301Z,1478895621.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:21.701Z,1478895621.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:21.869Z,1478895621.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:22.133Z,1478895622.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:22.280Z,1478895622.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:22.505Z,1478895622.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:22.902Z,1478895622.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:23.076Z,1478895623.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:23.302Z,1478895623.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:23.702Z,1478895623.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:23.808Z,1478895623.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:24.106Z,1478895624.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:24.511Z,1478895624.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:24.604Z,1478895624.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:24.905Z,1478895624.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:25.309Z,1478895625.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:25.401Z,1478895625.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:25.725Z,1478895625.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:25.812Z,1478895625.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:26.104Z,1478895626.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:26.505Z,1478895626.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:26.608Z,1478895626.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:26.933Z,1478895626.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:27.315Z,1478895627.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:27.405Z,1478895627.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:27.710Z,1478895627.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:27.820Z,1478895627.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:28.111Z,1478895628.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:28.516Z,1478895628.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:28.616Z,1478895628.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:28.905Z,1478895628.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:29.341Z,1478895629.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:29.412Z,1478895629.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:29.722Z,1478895629.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:29.825Z,1478895629.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:30.106Z,1478895630.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:30.505Z,1478895630.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:30.620Z,1478895630.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:30.947Z,1478895630.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:31.314Z,1478895631.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:31.416Z,1478895631.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:31.752Z,1478895631.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:31.916Z,1478895631.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:32.137Z,1478895632.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:32.510Z,1478895632.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:32.712Z,1478895632.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:32.912Z,1478895632.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:33.317Z,1478895633.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:33.509Z,1478895633.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:33.724Z,1478895633.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:34.118Z,1478895634.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:34.252Z,1478895634.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:34.501Z,1478895634.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:34.901Z,1478895634.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:35.048Z,1478895635.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:35.311Z,1478895635.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:35.714Z,1478895635.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:35.845Z,1478895635.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:36.113Z,1478895636.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:36.256Z,1478895636.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:36.503Z,1478895636.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:36.904Z,1478895636.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:37.052Z,1478895637.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:37.307Z,1478895637.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:37.711Z,1478895637.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:37.848Z,1478895637.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:38.106Z,1478895638.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:38.510Z,1478895638.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:38.644Z,1478895638.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:38.917Z,1478895638.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:39.311Z,1478895639.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:39.440Z,1478895639.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:39.725Z,1478895639.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:39.848Z,1478895639.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:40.130Z,1478895640.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:40.535Z,1478895640.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:40.644Z,1478895640.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:40.905Z,1478895640.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:41.309Z,1478895641.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:41.440Z,1478895641.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:41.715Z,1478895641.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:41.848Z,1478895641.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:42.105Z,1478895642.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:42.534Z,1478895642.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:42.644Z,1478895642.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:42.905Z,1478895642.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:43.293Z,1478895643.293 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T20:20:43.293Z,1478895643.293 [BPC1] Data Fault, FailCount= 1
2016-11-11T20:20:43.293Z,1478895643.293 [BPC1](ERROR): Data Fault
2016-11-11T20:20:43.305Z,1478895643.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:43.401Z,1478895643.401 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T20:20:43.440Z,1478895643.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:43.706Z,1478895643.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:43.848Z,1478895643.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:44.125Z,1478895644.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:44.518Z,1478895644.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:44.538Z,1478895644.538 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:20:44.538Z,1478895644.538 [BPC1] No Fault, FailCount= 1
2016-11-11T20:20:44.644Z,1478895644.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:44.991Z,1478895644.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:45.334Z,1478895645.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:45.441Z,1478895645.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:45.720Z,1478895645.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:45.880Z,1478895645.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:46.121Z,1478895646.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:46.496Z,1478895646.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:46.676Z,1478895646.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:46.909Z,1478895646.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:47.305Z,1478895647.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:47.472Z,1478895647.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:47.705Z,1478895647.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:48.117Z,1478895648.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:48.244Z,1478895648.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:48.518Z,1478895648.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:48.925Z,1478895648.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:49.041Z,1478895649.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:49.320Z,1478895649.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:49.723Z,1478895649.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:49.837Z,1478895649.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:50.114Z,1478895650.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:50.249Z,1478895650.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:50.517Z,1478895650.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:50.906Z,1478895650.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:51.044Z,1478895651.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:51.304Z,1478895651.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:51.715Z,1478895651.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:51.764Z,1478895651.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:52.110Z,1478895652.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:52.510Z,1478895652.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:52.560Z,1478895652.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:52.910Z,1478895652.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:53.356Z,1478895653.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:53.389Z,1478895653.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:53.723Z,1478895653.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:53.776Z,1478895653.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:54.128Z,1478895654.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:54.526Z,1478895654.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:54.572Z,1478895654.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:54.901Z,1478895654.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:55.326Z,1478895655.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:55.368Z,1478895655.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:55.720Z,1478895655.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:55.780Z,1478895655.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:56.124Z,1478895656.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:56.525Z,1478895656.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:56.576Z,1478895656.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:56.922Z,1478895656.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:57.372Z,1478895657.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:57.398Z,1478895657.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:57.734Z,1478895657.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:20:57.784Z,1478895657.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:58.580Z,1478895658.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:59.376Z,1478895659.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:20:59.852Z,1478895659.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:00.648Z,1478895660.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:01.105Z,1478895661.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:01.253Z,1478895661.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:01.444Z,1478895661.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:01.607Z,1478895661.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:02.013Z,1478895662.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:02.240Z,1478895662.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:02.385Z,1478895662.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:02.648Z,1478895662.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:02.803Z,1478895662.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:03.214Z,1478895663.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:03.446Z,1478895663.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:03.584Z,1478895663.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:03.982Z,1478895663.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:04.212Z,1478895664.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:04.389Z,1478895664.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:04.777Z,1478895664.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:05.008Z,1478895665.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:05.189Z,1478895665.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:05.591Z,1478895665.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:05.732Z,1478895665.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:05.986Z,1478895665.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:06.385Z,1478895666.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:06.528Z,1478895666.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:06.784Z,1478895666.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:07.184Z,1478895667.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:07.325Z,1478895667.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:07.585Z,1478895667.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:07.736Z,1478895667.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:07.980Z,1478895667.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:08.393Z,1478895668.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:08.532Z,1478895668.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:08.773Z,1478895668.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:09.199Z,1478895669.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:09.329Z,1478895669.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:09.577Z,1478895669.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:09.748Z,1478895669.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:09.983Z,1478895669.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:10.387Z,1478895670.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:10.544Z,1478895670.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:10.789Z,1478895670.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:11.193Z,1478895671.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:11.341Z,1478895671.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:11.579Z,1478895671.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:11.752Z,1478895671.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:11.984Z,1478895671.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:12.385Z,1478895672.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:12.548Z,1478895672.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:12.783Z,1478895672.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:13.178Z,1478895673.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:13.344Z,1478895673.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:13.589Z,1478895673.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:13.832Z,1478895673.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:13.984Z,1478895673.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:14.388Z,1478895674.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:14.628Z,1478895674.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:14.833Z,1478895674.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:15.197Z,1478895675.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:15.424Z,1478895675.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:15.609Z,1478895675.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:15.994Z,1478895675.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:16.188Z,1478895676.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:16.386Z,1478895676.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:16.811Z,1478895676.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:16.984Z,1478895676.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:17.213Z,1478895677.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:17.611Z,1478895677.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:17.780Z,1478895677.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:18.013Z,1478895678.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:18.192Z,1478895678.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:18.376Z,1478895678.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:18.797Z,1478895678.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:18.988Z,1478895678.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:19.187Z,1478895679.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:19.597Z,1478895679.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:19.708Z,1478895679.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:20.001Z,1478895680.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:20.373Z,1478895680.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:20.504Z,1478895680.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:20.773Z,1478895680.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:21.177Z,1478895681.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:21.301Z,1478895681.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:21.576Z,1478895681.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:21.712Z,1478895681.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:21.974Z,1478895681.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:22.376Z,1478895682.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:22.508Z,1478895682.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:22.784Z,1478895682.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:23.194Z,1478895683.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:23.305Z,1478895683.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:23.600Z,1478895683.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:23.716Z,1478895683.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:23.996Z,1478895683.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:24.401Z,1478895684.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:24.512Z,1478895684.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:24.793Z,1478895684.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:25.192Z,1478895685.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:25.309Z,1478895685.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:25.585Z,1478895685.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:25.720Z,1478895685.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:25.976Z,1478895685.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:26.386Z,1478895686.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:26.516Z,1478895686.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:26.789Z,1478895686.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:27.185Z,1478895687.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:27.312Z,1478895687.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:27.588Z,1478895687.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:27.836Z,1478895687.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:27.987Z,1478895687.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:28.381Z,1478895688.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:28.632Z,1478895688.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:28.795Z,1478895688.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:29.194Z,1478895689.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:29.428Z,1478895689.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:29.603Z,1478895689.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:30.041Z,1478895690.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:30.160Z,1478895690.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:30.381Z,1478895690.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:30.809Z,1478895690.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:30.956Z,1478895690.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:31.174Z,1478895691.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:31.610Z,1478895691.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:31.753Z,1478895691.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:32.012Z,1478895692.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:32.164Z,1478895692.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:32.374Z,1478895692.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:32.775Z,1478895692.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:32.960Z,1478895692.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:33.191Z,1478895693.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:33.584Z,1478895693.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:33.688Z,1478895693.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:33.998Z,1478895693.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:34.401Z,1478895694.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:34.484Z,1478895694.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:34.788Z,1478895694.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:35.187Z,1478895695.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:35.281Z,1478895695.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:35.600Z,1478895695.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:35.700Z,1478895695.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:35.981Z,1478895695.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:36.381Z,1478895696.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:36.496Z,1478895696.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:36.785Z,1478895696.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:37.177Z,1478895697.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:37.293Z,1478895697.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:37.598Z,1478895697.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:37.704Z,1478895697.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:37.995Z,1478895697.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:38.384Z,1478895698.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:38.500Z,1478895698.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:38.785Z,1478895698.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:39.197Z,1478895699.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:39.297Z,1478895699.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:39.592Z,1478895699.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:39.708Z,1478895699.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:39.999Z,1478895699.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:40.377Z,1478895700.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:40.504Z,1478895700.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:40.777Z,1478895700.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:41.181Z,1478895701.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:41.301Z,1478895701.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:41.624Z,1478895701.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:41.788Z,1478895701.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:41.994Z,1478895701.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:42.377Z,1478895702.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:42.584Z,1478895702.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:42.798Z,1478895702.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:43.191Z,1478895703.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:43.380Z,1478895703.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:43.609Z,1478895703.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:44.073Z,1478895704.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:44.140Z,1478895704.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:44.388Z,1478895704.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:44.789Z,1478895704.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:44.936Z,1478895704.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:45.234Z,1478895705.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:45.596Z,1478895705.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:45.733Z,1478895705.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:46.045Z,1478895706.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:46.156Z,1478895706.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:46.450Z,1478895706.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:46.810Z,1478895706.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:46.952Z,1478895706.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:47.190Z,1478895707.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:47.595Z,1478895707.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:47.692Z,1478895707.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:48.004Z,1478895708.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:48.409Z,1478895708.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:48.488Z,1478895708.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:48.786Z,1478895708.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:49.182Z,1478895709.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:49.285Z,1478895709.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:49.586Z,1478895709.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:49.696Z,1478895709.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:49.989Z,1478895709.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:50.400Z,1478895710.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:50.492Z,1478895710.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:50.829Z,1478895710.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:51.193Z,1478895711.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:51.288Z,1478895711.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:51.582Z,1478895711.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:51.696Z,1478895711.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:52.008Z,1478895712.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:52.407Z,1478895712.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:52.492Z,1478895712.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:52.784Z,1478895712.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:53.207Z,1478895713.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:53.289Z,1478895713.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:53.629Z,1478895713.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:53.700Z,1478895713.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:53.974Z,1478895713.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:54.421Z,1478895714.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:54.497Z,1478895714.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:54.830Z,1478895714.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:55.194Z,1478895715.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:55.292Z,1478895715.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:55.599Z,1478895715.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:55.756Z,1478895715.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:55.975Z,1478895715.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:56.382Z,1478895716.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:56.552Z,1478895716.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:56.818Z,1478895716.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:57.197Z,1478895717.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:57.348Z,1478895717.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:57.605Z,1478895717.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:57.990Z,1478895717.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:21:58.116Z,1478895718.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:58.912Z,1478895718.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:21:59.709Z,1478895719.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:00.132Z,1478895720.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:00.928Z,1478895720.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:01.644Z,1478895721.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:02.440Z,1478895722.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:03.237Z,1478895723.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:03.409Z,1478895723.409 [BPC1](ERROR): Failed to receive battery data
2016-11-11T20:22:03.409Z,1478895723.409 [BPC1] Communications Fault, FailCount= 1
2016-11-11T20:22:03.409Z,1478895723.409 [BPC1](ERROR): Communications Fault
2016-11-11T20:22:03.418Z,1478895723.418 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:03.418Z,1478895723.418 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 290
2016-11-11T20:22:03.418Z,1478895723.418 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:22:03.424Z,1478895723.424 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:03.425Z,1478895723.425 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 290
2016-11-11T20:22:03.425Z,1478895723.425 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:22:03.427Z,1478895723.427 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:03.427Z,1478895723.427 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 290
2016-11-11T20:22:03.427Z,1478895723.427 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:22:03.441Z,1478895723.441 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:22:03.442Z,1478895723.442 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:22:03.442Z,1478895723.442 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:22:03.442Z,1478895723.442 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T20:22:03.570Z,1478895723.569 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:22:03.570Z,1478895723.570 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 290
2016-11-11T20:22:03.570Z,1478895723.570 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:22:03.570Z,1478895723.570 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 290
2016-11-11T20:22:03.571Z,1478895723.571 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:22:03.571Z,1478895723.571 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 290
2016-11-11T20:22:03.648Z,1478895723.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:03.891Z,1478895723.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:22:03.892Z,1478895723.892 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:22:03.892Z,1478895723.892 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:22:03.897Z,1478895723.897 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:22:03.897Z,1478895723.897 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:22:03.897Z,1478895723.897 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:22:03.898Z,1478895723.898 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:22:03.898Z,1478895723.898 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:22:03.899Z,1478895723.899 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:22:04.292Z,1478895724.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:04.312Z,1478895724.312 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:22:04.312Z,1478895724.312 [BPC1] No Fault, FailCount= 1
2016-11-11T20:22:04.444Z,1478895724.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:04.745Z,1478895724.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:05.121Z,1478895725.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:05.240Z,1478895725.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:05.492Z,1478895725.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:05.897Z,1478895725.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:06.036Z,1478895726.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:06.301Z,1478895726.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:06.751Z,1478895726.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:06.832Z,1478895726.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:07.093Z,1478895727.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:07.507Z,1478895727.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:07.628Z,1478895727.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:07.902Z,1478895727.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:08.297Z,1478895728.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:08.424Z,1478895728.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:08.686Z,1478895728.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:09.092Z,1478895729.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:09.220Z,1478895729.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:09.521Z,1478895729.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:09.901Z,1478895729.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:10.016Z,1478895730.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:10.292Z,1478895730.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:10.693Z,1478895730.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:10.812Z,1478895730.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:11.093Z,1478895731.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:11.493Z,1478895731.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:11.608Z,1478895731.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:11.906Z,1478895731.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:12.303Z,1478895732.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:12.404Z,1478895732.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:12.692Z,1478895732.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:13.093Z,1478895733.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:13.200Z,1478895733.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:13.492Z,1478895733.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:13.889Z,1478895733.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:13.996Z,1478895733.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:14.297Z,1478895734.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:14.706Z,1478895734.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:14.792Z,1478895734.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:15.092Z,1478895735.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:15.530Z,1478895735.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:15.588Z,1478895735.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:15.892Z,1478895735.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:16.300Z,1478895736.300 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T20:22:16.300Z,1478895736.300 [BPC1] Data Fault, FailCount= 2
2016-11-11T20:22:16.300Z,1478895736.300 [BPC1](ERROR): Data Fault
2016-11-11T20:22:16.313Z,1478895736.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:16.333Z,1478895736.333 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T20:22:16.384Z,1478895736.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:16.703Z,1478895736.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:17.093Z,1478895737.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:17.180Z,1478895737.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:17.488Z,1478895737.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:17.508Z,1478895737.508 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:22:17.508Z,1478895737.508 [BPC1] No Fault, FailCount= 2
2016-11-11T20:22:17.945Z,1478895737.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:17.976Z,1478895737.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:18.325Z,1478895738.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:18.693Z,1478895738.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:18.772Z,1478895738.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:19.097Z,1478895739.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:19.493Z,1478895739.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:19.568Z,1478895739.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:19.893Z,1478895739.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:20.294Z,1478895740.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:20.364Z,1478895740.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:20.706Z,1478895740.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:21.104Z,1478895741.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:21.160Z,1478895741.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:21.497Z,1478895741.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:21.897Z,1478895741.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:21.956Z,1478895741.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:22.301Z,1478895742.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:22.693Z,1478895742.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:22.752Z,1478895742.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:23.097Z,1478895743.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:23.492Z,1478895743.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:23.548Z,1478895743.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:23.897Z,1478895743.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:24.292Z,1478895744.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:24.344Z,1478895744.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:24.692Z,1478895744.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:25.092Z,1478895745.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:25.140Z,1478895745.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:25.497Z,1478895745.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:25.892Z,1478895745.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:25.936Z,1478895745.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:26.301Z,1478895746.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:26.697Z,1478895746.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:26.732Z,1478895746.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:27.161Z,1478895747.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:27.532Z,1478895747.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:27.553Z,1478895747.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:27.940Z,1478895747.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:27.951Z,1478895747.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:28.331Z,1478895748.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:28.348Z,1478895748.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:28.690Z,1478895748.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:28.756Z,1478895748.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:29.122Z,1478895749.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:29.165Z,1478895749.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:29.510Z,1478895749.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:29.589Z,1478895749.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:29.910Z,1478895749.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:29.996Z,1478895749.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:30.318Z,1478895750.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:30.404Z,1478895750.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:30.761Z,1478895750.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:30.816Z,1478895750.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:31.110Z,1478895751.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:31.224Z,1478895751.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:31.517Z,1478895751.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:31.636Z,1478895751.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:31.905Z,1478895751.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:32.044Z,1478895752.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:32.322Z,1478895752.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:32.452Z,1478895752.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:32.726Z,1478895752.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:32.860Z,1478895752.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:33.136Z,1478895753.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:33.268Z,1478895753.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:33.518Z,1478895753.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:33.676Z,1478895753.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:33.890Z,1478895753.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:34.317Z,1478895754.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:34.472Z,1478895754.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:34.698Z,1478895754.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:35.117Z,1478895755.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:35.268Z,1478895755.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:35.505Z,1478895755.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:35.676Z,1478895755.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:35.898Z,1478895755.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:36.318Z,1478895756.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:36.472Z,1478895756.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:36.709Z,1478895756.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:37.098Z,1478895757.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:37.269Z,1478895757.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:37.517Z,1478895757.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:37.704Z,1478895757.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:37.917Z,1478895757.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:38.318Z,1478895758.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:38.500Z,1478895758.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:38.714Z,1478895758.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:39.093Z,1478895759.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:39.296Z,1478895759.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:39.510Z,1478895759.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:39.918Z,1478895759.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:40.048Z,1478895760.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:40.349Z,1478895760.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:40.718Z,1478895760.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:40.844Z,1478895760.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:41.098Z,1478895761.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:41.500Z,1478895761.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:41.641Z,1478895761.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:41.902Z,1478895761.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:42.060Z,1478895762.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:42.330Z,1478895762.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:42.765Z,1478895762.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:42.856Z,1478895762.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:43.090Z,1478895763.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:43.489Z,1478895763.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:43.588Z,1478895763.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:43.895Z,1478895763.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:44.293Z,1478895764.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:44.384Z,1478895764.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:44.750Z,1478895764.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:45.109Z,1478895765.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:45.181Z,1478895765.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:45.506Z,1478895765.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:45.592Z,1478895765.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:45.917Z,1478895765.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:46.301Z,1478895766.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:46.388Z,1478895766.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:46.747Z,1478895766.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:47.178Z,1478895767.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:47.184Z,1478895767.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:47.509Z,1478895767.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:47.600Z,1478895767.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:47.905Z,1478895767.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:48.305Z,1478895768.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:48.396Z,1478895768.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:48.697Z,1478895768.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:49.104Z,1478895769.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:49.193Z,1478895769.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:49.504Z,1478895769.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:49.905Z,1478895769.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:49.988Z,1478895769.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:50.304Z,1478895770.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:50.396Z,1478895770.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:50.708Z,1478895770.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:51.113Z,1478895771.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:51.192Z,1478895771.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:51.501Z,1478895771.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:51.676Z,1478895771.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:51.918Z,1478895771.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:52.349Z,1478895772.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:52.472Z,1478895772.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:52.721Z,1478895772.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:53.121Z,1478895773.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:53.268Z,1478895773.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:53.517Z,1478895773.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:53.910Z,1478895773.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:54.040Z,1478895774.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:54.317Z,1478895774.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:54.694Z,1478895774.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:54.836Z,1478895774.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:55.093Z,1478895775.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:55.528Z,1478895775.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:55.633Z,1478895775.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:55.918Z,1478895775.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:56.044Z,1478895776.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:56.289Z,1478895776.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:56.697Z,1478895776.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:56.840Z,1478895776.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:57.160Z,1478895777.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:57.529Z,1478895777.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:57.576Z,1478895777.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:57.917Z,1478895777.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:58.325Z,1478895778.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:22:58.372Z,1478895778.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:59.169Z,1478895779.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:22:59.584Z,1478895779.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:00.380Z,1478895780.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:01.176Z,1478895781.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:01.584Z,1478895781.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:01.941Z,1478895781.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:02.066Z,1478895782.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:02.380Z,1478895782.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:02.467Z,1478895782.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:02.875Z,1478895782.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:03.176Z,1478895783.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:03.285Z,1478895783.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:03.588Z,1478895783.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:03.646Z,1478895783.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:04.085Z,1478895784.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:04.384Z,1478895784.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:04.485Z,1478895784.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:04.847Z,1478895784.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:05.182Z,1478895785.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:05.303Z,1478895785.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:05.652Z,1478895785.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:05.684Z,1478895785.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:06.053Z,1478895786.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:06.452Z,1478895786.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:06.480Z,1478895786.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:06.865Z,1478895786.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:07.262Z,1478895787.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:07.276Z,1478895787.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:07.697Z,1478895787.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:08.020Z,1478895788.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:08.069Z,1478895788.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:08.472Z,1478895788.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:08.817Z,1478895788.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:08.842Z,1478895788.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:09.244Z,1478895789.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:09.612Z,1478895789.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:09.691Z,1478895789.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:10.024Z,1478895790.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:10.048Z,1478895790.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:10.449Z,1478895790.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:10.820Z,1478895790.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:10.854Z,1478895790.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:11.246Z,1478895791.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:11.536Z,1478895791.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:11.651Z,1478895791.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:12.053Z,1478895792.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:12.332Z,1478895792.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:12.460Z,1478895792.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:12.863Z,1478895792.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:13.129Z,1478895793.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:13.262Z,1478895793.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:13.544Z,1478895793.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:13.658Z,1478895793.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:14.056Z,1478895794.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:14.340Z,1478895794.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:14.457Z,1478895794.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:14.856Z,1478895794.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:15.137Z,1478895795.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:15.285Z,1478895795.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:15.560Z,1478895795.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:15.641Z,1478895795.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:16.042Z,1478895796.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:16.356Z,1478895796.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:16.477Z,1478895796.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:16.843Z,1478895796.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:17.152Z,1478895797.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:17.258Z,1478895797.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:17.560Z,1478895797.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:17.685Z,1478895797.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:18.057Z,1478895798.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:18.356Z,1478895798.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:18.493Z,1478895798.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:18.893Z,1478895798.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:19.152Z,1478895799.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:19.296Z,1478895799.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:19.656Z,1478895799.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:19.680Z,1478895799.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:20.057Z,1478895800.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:20.465Z,1478895800.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:20.476Z,1478895800.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:20.857Z,1478895800.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:21.261Z,1478895801.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:21.272Z,1478895801.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:21.667Z,1478895801.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:21.984Z,1478895801.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:22.050Z,1478895802.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:22.455Z,1478895802.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:22.780Z,1478895802.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:22.859Z,1478895802.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:23.245Z,1478895803.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:23.577Z,1478895803.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:23.674Z,1478895803.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:23.992Z,1478895803.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:24.053Z,1478895804.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:24.452Z,1478895804.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:24.788Z,1478895804.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:24.851Z,1478895804.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:25.257Z,1478895805.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:25.512Z,1478895805.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:25.652Z,1478895805.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:26.060Z,1478895806.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:26.308Z,1478895806.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:26.465Z,1478895806.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:26.853Z,1478895806.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:27.105Z,1478895807.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:27.253Z,1478895807.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:27.516Z,1478895807.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:27.645Z,1478895807.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:28.049Z,1478895808.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:28.312Z,1478895808.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:28.462Z,1478895808.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:28.853Z,1478895808.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:29.109Z,1478895809.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:29.285Z,1478895809.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:29.520Z,1478895809.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:29.649Z,1478895809.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:30.044Z,1478895810.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:30.317Z,1478895810.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:30.448Z,1478895810.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:30.869Z,1478895810.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:31.113Z,1478895811.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:31.254Z,1478895811.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:31.524Z,1478895811.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:31.650Z,1478895811.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:32.093Z,1478895812.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:32.320Z,1478895812.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:32.446Z,1478895812.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:32.877Z,1478895812.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:33.116Z,1478895813.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:33.299Z,1478895813.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:33.657Z,1478895813.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:33.668Z,1478895813.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:34.056Z,1478895814.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:34.457Z,1478895814.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:34.464Z,1478895814.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:34.871Z,1478895814.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:35.260Z,1478895815.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:35.266Z,1478895815.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:35.661Z,1478895815.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:35.968Z,1478895815.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:36.061Z,1478895816.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:36.455Z,1478895816.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:36.764Z,1478895816.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:36.840Z,1478895816.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:37.245Z,1478895817.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:37.561Z,1478895817.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:37.649Z,1478895817.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:37.972Z,1478895817.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:38.048Z,1478895818.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:38.449Z,1478895818.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:38.768Z,1478895818.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:38.875Z,1478895818.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:39.259Z,1478895819.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:39.492Z,1478895819.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:39.664Z,1478895819.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:40.046Z,1478895820.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:40.288Z,1478895820.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:40.453Z,1478895820.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:40.853Z,1478895820.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:41.087Z,1478895821.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:41.253Z,1478895821.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:41.504Z,1478895821.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:41.654Z,1478895821.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:42.058Z,1478895822.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:42.300Z,1478895822.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:42.452Z,1478895822.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:42.850Z,1478895822.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:43.097Z,1478895823.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:43.268Z,1478895823.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:43.508Z,1478895823.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:43.651Z,1478895823.651 [BPC1](ERROR): Failed to parse message.
2016-11-11T20:23:43.652Z,1478895823.652 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T20:23:43.652Z,1478895823.652 [BPC1] Data Fault, FailCount= 1
2016-11-11T20:23:43.652Z,1478895823.652 [BPC1](ERROR): Data Fault
2016-11-11T20:23:43.674Z,1478895823.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:43.711Z,1478895823.711 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T20:23:44.065Z,1478895824.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:44.304Z,1478895824.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:44.450Z,1478895824.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:44.845Z,1478895824.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:44.886Z,1478895824.886 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:23:44.886Z,1478895824.886 [BPC1] No Fault, FailCount= 1
2016-11-11T20:23:45.101Z,1478895825.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:45.322Z,1478895825.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:45.512Z,1478895825.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:45.645Z,1478895825.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:46.076Z,1478895826.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:46.308Z,1478895826.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:46.448Z,1478895826.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:46.845Z,1478895826.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:47.104Z,1478895827.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:47.288Z,1478895827.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:47.620Z,1478895827.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:47.674Z,1478895827.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:48.065Z,1478895828.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:48.416Z,1478895828.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:48.467Z,1478895828.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:48.859Z,1478895828.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:49.212Z,1478895829.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:49.260Z,1478895829.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:49.655Z,1478895829.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:49.944Z,1478895829.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:50.057Z,1478895830.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:50.465Z,1478895830.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:50.742Z,1478895830.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:50.861Z,1478895830.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:51.241Z,1478895831.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:51.537Z,1478895831.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:51.653Z,1478895831.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:51.960Z,1478895831.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:52.053Z,1478895832.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:52.457Z,1478895832.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:52.756Z,1478895832.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:52.850Z,1478895832.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:53.257Z,1478895833.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:53.476Z,1478895833.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:53.657Z,1478895833.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:54.056Z,1478895834.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:54.272Z,1478895834.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:54.445Z,1478895834.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:54.853Z,1478895834.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:55.069Z,1478895835.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:55.261Z,1478895835.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:55.488Z,1478895835.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:55.653Z,1478895835.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:56.057Z,1478895836.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:56.287Z,1478895836.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:56.454Z,1478895836.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:56.849Z,1478895836.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:57.085Z,1478895837.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:57.305Z,1478895837.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:57.327Z,1478895837.327 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T20:18:57.1Z
2016-11-11T20:23:57.327Z,1478895837.327 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T20:23:57.327Z,1478895837.327 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T20:23:57.500Z,1478895837.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:57.665Z,1478895837.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:58.296Z,1478895838.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:58.549Z,1478895838.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:58.681Z,1478895838.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:23:59.093Z,1478895839.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:23:59.505Z,1478895839.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:00.301Z,1478895840.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:01.096Z,1478895841.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:01.568Z,1478895841.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:02.319Z,1478895842.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:02.348Z,1478895842.348 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0360.lzma
2016-11-11T20:24:02.364Z,1478895842.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:02.448Z,1478895842.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:02.833Z,1478895842.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:03.150Z,1478895843.150 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0360.lzma.bak
2016-11-11T20:24:03.150Z,1478895843.150 [DataOverHttps](INFO): SBD MOMSN=4555730
2016-11-11T20:24:03.160Z,1478895843.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:03.286Z,1478895843.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:03.956Z,1478895843.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:04.654Z,1478895844.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:05.185Z,1478895845.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:05.310Z,1478895845.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:05.448Z,1478895845.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:05.920Z,1478895845.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:06.716Z,1478895846.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:07.444Z,1478895847.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:08.240Z,1478895848.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:08.642Z,1478895848.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:08.759Z,1478895848.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:09.036Z,1478895849.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:09.178Z,1478895849.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:09.532Z,1478895849.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:09.549Z,1478895849.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:09.921Z,1478895849.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:10.322Z,1478895850.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:10.328Z,1478895850.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:11.124Z,1478895851.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:11.532Z,1478895851.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:12.328Z,1478895852.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:13.124Z,1478895853.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:13.532Z,1478895853.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:13.774Z,1478895853.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:13.849Z,1478895853.849 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20161111T044527/Express0361.lzma
2016-11-11T20:24:13.945Z,1478895853.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:14.288Z,1478895854.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:14.328Z,1478895854.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:14.641Z,1478895854.641 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0361.lzma.bak
2016-11-11T20:24:14.642Z,1478895854.642 [DataOverHttps](INFO): SBD MOMSN=4555732
2016-11-11T20:24:14.701Z,1478895854.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:15.126Z,1478895855.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:15.536Z,1478895855.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:16.090Z,1478895856.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:16.107Z,1478895856.107 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T20:24:16.111Z,1478895856.111 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T20:24:16.111Z,1478895856.111 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T20:24:16.217Z,1478895856.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:16.332Z,1478895856.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:17.128Z,1478895857.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:17.892Z,1478895857.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:18.688Z,1478895858.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:19.484Z,1478895859.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:19.926Z,1478895859.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:19.933Z,1478895859.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:20.066Z,1478895860.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:20.444Z,1478895860.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:20.720Z,1478895860.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:20.826Z,1478895860.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:21.213Z,1478895861.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:21.408Z,1478895861.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:21.613Z,1478895861.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:22.029Z,1478895862.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:22.204Z,1478895862.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:22.416Z,1478895862.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:22.813Z,1478895862.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:23.001Z,1478895863.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:23.217Z,1478895863.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:23.412Z,1478895863.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:23.613Z,1478895863.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:24.018Z,1478895864.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:24.208Z,1478895864.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:24.418Z,1478895864.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:24.813Z,1478895864.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:25.005Z,1478895865.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:25.213Z,1478895865.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:25.428Z,1478895865.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:25.617Z,1478895865.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:26.016Z,1478895866.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:26.224Z,1478895866.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:26.421Z,1478895866.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:26.826Z,1478895866.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:27.021Z,1478895867.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:27.217Z,1478895867.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:27.432Z,1478895867.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:27.617Z,1478895867.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:28.024Z,1478895868.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:28.228Z,1478895868.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:28.416Z,1478895868.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:28.810Z,1478895868.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:29.024Z,1478895869.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:29.217Z,1478895869.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:29.516Z,1478895869.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:29.609Z,1478895869.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:30.009Z,1478895870.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:30.312Z,1478895870.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:30.417Z,1478895870.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:30.805Z,1478895870.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:31.108Z,1478895871.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:31.204Z,1478895871.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:31.629Z,1478895871.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:31.864Z,1478895871.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:32.009Z,1478895872.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:32.365Z,1478895872.365 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T20:24:32.410Z,1478895872.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:32.660Z,1478895872.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:32.833Z,1478895872.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:33.216Z,1478895873.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:33.457Z,1478895873.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:33.647Z,1478895873.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:33.868Z,1478895873.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:34.000Z,1478895874.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:34.437Z,1478895874.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:34.664Z,1478895874.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:34.801Z,1478895874.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:35.234Z,1478895875.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:35.388Z,1478895875.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:35.632Z,1478895875.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:36.001Z,1478895876.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:36.184Z,1478895876.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:36.409Z,1478895876.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:36.803Z,1478895876.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:36.981Z,1478895876.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:37.217Z,1478895877.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:37.392Z,1478895877.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:37.609Z,1478895877.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:37.964Z,1478895877.964 [NAL9602](INFO): Powering down
2016-11-11T20:24:38.026Z,1478895878.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:38.190Z,1478895878.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:38.413Z,1478895878.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:38.809Z,1478895878.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:38.986Z,1478895878.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:39.211Z,1478895879.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:39.405Z,1478895879.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:39.612Z,1478895879.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:40.009Z,1478895880.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:40.200Z,1478895880.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:40.412Z,1478895880.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:40.813Z,1478895880.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:40.997Z,1478895880.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:41.213Z,1478895881.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:41.412Z,1478895881.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:41.606Z,1478895881.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:42.013Z,1478895882.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:42.208Z,1478895882.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:42.417Z,1478895882.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:42.816Z,1478895882.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:43.004Z,1478895883.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:43.217Z,1478895883.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:43.484Z,1478895883.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:43.617Z,1478895883.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:44.008Z,1478895884.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:44.280Z,1478895884.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:44.423Z,1478895884.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:44.821Z,1478895884.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:45.076Z,1478895885.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:45.217Z,1478895885.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:45.601Z,1478895885.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:45.840Z,1478895885.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:46.000Z,1478895886.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:46.437Z,1478895886.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:46.636Z,1478895886.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:46.804Z,1478895886.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:47.217Z,1478895887.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:47.433Z,1478895887.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:47.649Z,1478895887.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:47.844Z,1478895887.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:48.015Z,1478895888.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:48.437Z,1478895888.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:48.640Z,1478895888.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:48.818Z,1478895888.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:49.225Z,1478895889.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:49.368Z,1478895889.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:49.633Z,1478895889.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:49.996Z,1478895889.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:50.164Z,1478895890.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:50.401Z,1478895890.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:50.801Z,1478895890.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:50.966Z,1478895890.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:51.201Z,1478895891.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:51.392Z,1478895891.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:51.601Z,1478895891.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:52.004Z,1478895892.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:52.188Z,1478895892.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:52.403Z,1478895892.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:52.802Z,1478895892.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:52.985Z,1478895892.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:53.208Z,1478895893.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:53.396Z,1478895893.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:53.603Z,1478895893.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:54.003Z,1478895894.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:54.192Z,1478895894.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:54.408Z,1478895894.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:54.825Z,1478895894.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:54.989Z,1478895894.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:55.228Z,1478895895.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:55.400Z,1478895895.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:55.613Z,1478895895.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:56.012Z,1478895896.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:56.196Z,1478895896.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:56.413Z,1478895896.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:56.813Z,1478895896.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:56.992Z,1478895896.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:57.213Z,1478895897.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:57.472Z,1478895897.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:57.614Z,1478895897.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:58.054Z,1478895898.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:58.268Z,1478895898.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:58.409Z,1478895898.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:58.813Z,1478895898.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:59.064Z,1478895899.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:24:59.205Z,1478895899.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:59.602Z,1478895899.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:24:59.816Z,1478895899.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:00.025Z,1478895900.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:00.401Z,1478895900.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:00.612Z,1478895900.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:00.805Z,1478895900.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:01.237Z,1478895901.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:01.409Z,1478895901.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:01.595Z,1478895901.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:01.000Z,1478895902.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:02.204Z,1478895902.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:02.401Z,1478895902.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:02.799Z,1478895902.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:02.000Z,1478895903.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:03.196Z,1478895903.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:03.599Z,1478895903.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:03.796Z,1478895903.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:04.022Z,1478895904.022 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:04.022Z,1478895904.022 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 291
2016-11-11T20:25:04.022Z,1478895904.022 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:25:04.041Z,1478895904.041 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:04.041Z,1478895904.041 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 291
2016-11-11T20:25:04.041Z,1478895904.041 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:25:04.043Z,1478895904.043 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:04.044Z,1478895904.044 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 291
2016-11-11T20:25:04.044Z,1478895904.044 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:25:04.058Z,1478895904.058 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:25:04.058Z,1478895904.058 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:25:04.059Z,1478895904.059 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:25:04.417Z,1478895904.417 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:25:04.417Z,1478895904.417 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 291
2016-11-11T20:25:04.417Z,1478895904.417 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:25:04.417Z,1478895904.418 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 291
2016-11-11T20:25:04.418Z,1478895904.418 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:25:04.418Z,1478895904.418 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 291
2016-11-11T20:25:04.592Z,1478895904.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:04.789Z,1478895904.789 [BPC1](ERROR): Failed to receive battery data
2016-11-11T20:25:04.789Z,1478895904.789 [BPC1] Communications Fault, FailCount= 1
2016-11-11T20:25:04.789Z,1478895904.789 [BPC1](ERROR): Communications Fault
2016-11-11T20:25:04.812Z,1478895904.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:25:04.812Z,1478895904.812 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:25:04.813Z,1478895904.813 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:25:04.817Z,1478895904.817 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:25:04.818Z,1478895904.818 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:25:04.818Z,1478895904.818 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:25:04.818Z,1478895904.819 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:25:04.819Z,1478895904.819 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:25:04.819Z,1478895904.819 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:25:04.833Z,1478895904.833 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T20:25:05.201Z,1478895905.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:05.388Z,1478895905.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:05.605Z,1478895905.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:06.001Z,1478895906.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:06.021Z,1478895906.021 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:25:06.021Z,1478895906.021 [BPC1] No Fault, FailCount= 1
2016-11-11T20:25:06.184Z,1478895906.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:06.446Z,1478895906.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:06.796Z,1478895906.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:06.980Z,1478895906.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:07.199Z,1478895907.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:07.601Z,1478895907.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:07.776Z,1478895907.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:07.000Z,1478895908.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:08.401Z,1478895908.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:08.572Z,1478895908.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:08.800Z,1478895908.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:09.234Z,1478895909.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:09.368Z,1478895909.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:09.601Z,1478895909.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:10.038Z,1478895910.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:10.164Z,1478895910.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:10.405Z,1478895910.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:10.799Z,1478895910.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:10.961Z,1478895910.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:11.197Z,1478895911.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:11.605Z,1478895911.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:11.756Z,1478895911.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:12.001Z,1478895912.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:12.400Z,1478895912.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:12.552Z,1478895912.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:12.847Z,1478895912.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:13.199Z,1478895913.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:13.348Z,1478895913.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:13.600Z,1478895913.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:13.996Z,1478895913.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:14.144Z,1478895914.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:14.399Z,1478895914.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:14.796Z,1478895914.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:14.941Z,1478895914.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:15.205Z,1478895915.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:15.599Z,1478895915.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:15.736Z,1478895915.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:15.999Z,1478895916.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:16.408Z,1478895916.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:16.533Z,1478895916.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:16.805Z,1478895916.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:17.328Z,1478895917.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:18.124Z,1478895918.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:18.536Z,1478895918.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:18.944Z,1478895918.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:19.356Z,1478895919.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:19.768Z,1478895919.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:20.176Z,1478895920.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:20.584Z,1478895920.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:20.992Z,1478895920.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:21.400Z,1478895921.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:21.808Z,1478895921.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:22.216Z,1478895922.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:22.628Z,1478895922.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:22.985Z,1478895922.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:23.113Z,1478895923.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:23.357Z,1478895923.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:23.477Z,1478895923.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:23.877Z,1478895923.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:24.152Z,1478895924.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:24.276Z,1478895924.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:24.683Z,1478895924.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:24.948Z,1478895924.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:25.074Z,1478895925.074 [BPC1](ERROR): Failed to receive battery data
2016-11-11T20:25:25.074Z,1478895925.074 [BPC1] Communications Fault, FailCount= 2
2016-11-11T20:25:25.074Z,1478895925.074 [BPC1](ERROR): Communications Fault
2016-11-11T20:25:25.090Z,1478895925.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:25.147Z,1478895925.147 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T20:25:25.443Z,1478895925.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:25.485Z,1478895925.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:25.885Z,1478895925.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:26.236Z,1478895926.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:26.298Z,1478895926.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:26.326Z,1478895926.326 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:25:26.326Z,1478895926.326 [BPC1] No Fault, FailCount= 2
2016-11-11T20:25:26.741Z,1478895926.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:27.043Z,1478895927.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:27.103Z,1478895927.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:27.501Z,1478895927.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:27.772Z,1478895927.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:27.872Z,1478895927.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:28.277Z,1478895928.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:28.568Z,1478895928.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:28.681Z,1478895928.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:29.079Z,1478895929.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:29.365Z,1478895929.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:29.474Z,1478895929.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:29.776Z,1478895929.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:29.884Z,1478895929.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:30.279Z,1478895930.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:30.572Z,1478895930.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:30.678Z,1478895930.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:31.079Z,1478895931.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:31.300Z,1478895931.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:31.486Z,1478895931.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:31.888Z,1478895931.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:32.096Z,1478895932.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:32.290Z,1478895932.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:32.682Z,1478895932.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:32.893Z,1478895932.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:33.097Z,1478895933.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:33.304Z,1478895933.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:33.481Z,1478895933.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:33.888Z,1478895933.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:34.100Z,1478895934.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:34.297Z,1478895934.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:34.700Z,1478895934.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:34.897Z,1478895934.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:35.097Z,1478895935.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:35.308Z,1478895935.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:35.477Z,1478895935.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:35.877Z,1478895935.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:36.104Z,1478895936.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:36.275Z,1478895936.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:36.685Z,1478895936.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:36.901Z,1478895936.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:37.084Z,1478895937.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:37.312Z,1478895937.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:37.479Z,1478895937.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:37.898Z,1478895937.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:38.110Z,1478895938.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:38.290Z,1478895938.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:38.681Z,1478895938.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:38.904Z,1478895938.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:39.094Z,1478895939.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:39.388Z,1478895939.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:39.506Z,1478895939.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:39.888Z,1478895939.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:40.184Z,1478895940.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:40.305Z,1478895940.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:40.709Z,1478895940.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:40.980Z,1478895940.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:41.085Z,1478895941.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:41.477Z,1478895941.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:41.740Z,1478895941.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:41.885Z,1478895941.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:42.280Z,1478895942.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:42.536Z,1478895942.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:42.688Z,1478895942.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:43.090Z,1478895943.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:43.333Z,1478895943.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:43.480Z,1478895943.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:43.744Z,1478895943.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:43.882Z,1478895943.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:44.290Z,1478895944.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:44.540Z,1478895944.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:44.682Z,1478895944.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:45.091Z,1478895945.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:45.272Z,1478895945.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:45.489Z,1478895945.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:45.891Z,1478895945.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:46.068Z,1478895946.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:46.291Z,1478895946.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:46.692Z,1478895946.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:46.865Z,1478895946.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:47.090Z,1478895947.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:47.280Z,1478895947.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:47.491Z,1478895947.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:47.892Z,1478895947.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:48.076Z,1478895948.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:48.284Z,1478895948.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:48.672Z,1478895948.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:48.873Z,1478895948.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:49.101Z,1478895949.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:49.288Z,1478895949.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:49.497Z,1478895949.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:49.881Z,1478895949.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:50.084Z,1478895950.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:50.284Z,1478895950.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:50.679Z,1478895950.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:50.881Z,1478895950.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:51.087Z,1478895951.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:51.292Z,1478895951.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:51.521Z,1478895951.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:51.882Z,1478895951.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:52.088Z,1478895952.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:52.289Z,1478895952.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:52.721Z,1478895952.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:52.884Z,1478895952.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:53.096Z,1478895953.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:53.372Z,1478895953.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:53.506Z,1478895953.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:53.884Z,1478895953.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:54.168Z,1478895954.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:54.315Z,1478895954.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:54.717Z,1478895954.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:54.965Z,1478895954.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:55.081Z,1478895955.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:55.485Z,1478895955.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:55.724Z,1478895955.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:55.889Z,1478895955.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:56.283Z,1478895956.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:56.520Z,1478895956.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:56.685Z,1478895956.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:57.091Z,1478895957.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:57.322Z,1478895957.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:57.484Z,1478895957.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:57.764Z,1478895957.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:57.880Z,1478895957.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:58.289Z,1478895958.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:58.560Z,1478895958.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:58.680Z,1478895958.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:59.085Z,1478895959.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:59.260Z,1478895959.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:25:59.488Z,1478895959.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:25:59.881Z,1478895959.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:00.056Z,1478895960.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:00.282Z,1478895960.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:00.691Z,1478895960.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:00.853Z,1478895960.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:01.101Z,1478895961.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:01.264Z,1478895961.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:01.492Z,1478895961.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:01.893Z,1478895961.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:02.060Z,1478895962.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:02.273Z,1478895962.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:02.677Z,1478895962.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:02.857Z,1478895962.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:03.077Z,1478895963.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:03.272Z,1478895963.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:03.481Z,1478895963.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:03.880Z,1478895963.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:04.068Z,1478895964.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:04.288Z,1478895964.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:04.684Z,1478895964.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:04.865Z,1478895964.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:05.133Z,1478895965.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:05.276Z,1478895965.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:05.493Z,1478895965.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:05.890Z,1478895965.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:06.072Z,1478895966.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:06.289Z,1478895966.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:06.717Z,1478895966.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:06.868Z,1478895966.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:07.089Z,1478895967.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:07.352Z,1478895967.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:07.506Z,1478895967.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:07.871Z,1478895967.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:08.148Z,1478895968.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:08.306Z,1478895968.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:08.714Z,1478895968.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:08.944Z,1478895968.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:09.081Z,1478895969.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:09.480Z,1478895969.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:09.700Z,1478895969.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:09.878Z,1478895969.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:10.285Z,1478895970.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:10.496Z,1478895970.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:10.679Z,1478895970.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:11.093Z,1478895971.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:11.293Z,1478895971.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:11.489Z,1478895971.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:11.704Z,1478895971.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:11.888Z,1478895971.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:12.288Z,1478895972.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:12.500Z,1478895972.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:12.691Z,1478895972.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:13.092Z,1478895973.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:13.236Z,1478895973.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:13.491Z,1478895973.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:13.512Z,1478895973.512 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T20:26:13.877Z,1478895973.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:14.032Z,1478895974.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:14.277Z,1478895974.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:14.677Z,1478895974.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:14.829Z,1478895974.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:15.104Z,1478895975.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:15.481Z,1478895975.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:15.624Z,1478895975.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:15.881Z,1478895975.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:16.278Z,1478895976.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:16.420Z,1478895976.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:16.678Z,1478895976.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:17.085Z,1478895977.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:17.224Z,1478895977.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:18.020Z,1478895978.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:18.816Z,1478895978.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:19.236Z,1478895979.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:20.032Z,1478895980.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:20.529Z,1478895980.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:20.649Z,1478895980.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:20.828Z,1478895980.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:21.045Z,1478895981.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:21.344Z,1478895981.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:21.457Z,1478895981.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:21.840Z,1478895981.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:22.140Z,1478895982.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:22.269Z,1478895982.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:22.662Z,1478895982.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:22.936Z,1478895982.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:23.045Z,1478895983.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:23.433Z,1478895983.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:23.680Z,1478895983.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:23.836Z,1478895983.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:24.239Z,1478895984.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:24.476Z,1478895984.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:24.633Z,1478895984.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:25.042Z,1478895985.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:25.273Z,1478895985.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:25.433Z,1478895985.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:25.684Z,1478895985.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:25.845Z,1478895985.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:26.233Z,1478895986.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:26.480Z,1478895986.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:26.633Z,1478895986.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:27.034Z,1478895987.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:27.208Z,1478895987.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:27.427Z,1478895987.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:27.828Z,1478895987.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:28.004Z,1478895988.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:28.234Z,1478895988.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:28.633Z,1478895988.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:28.801Z,1478895988.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:29.039Z,1478895989.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:29.216Z,1478895989.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:29.441Z,1478895989.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:29.835Z,1478895989.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:30.012Z,1478895990.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:30.235Z,1478895990.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:30.632Z,1478895990.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:30.811Z,1478895990.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:31.045Z,1478895991.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:31.229Z,1478895991.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:31.434Z,1478895991.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:31.841Z,1478895991.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:32.024Z,1478895992.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:32.233Z,1478895992.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:32.634Z,1478895992.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:32.821Z,1478895992.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:33.041Z,1478895993.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:33.235Z,1478895993.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:33.465Z,1478895993.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:33.844Z,1478895993.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:34.032Z,1478895994.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:34.275Z,1478895994.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:34.629Z,1478895994.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:34.828Z,1478895994.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:35.049Z,1478895995.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:35.300Z,1478895995.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:35.465Z,1478895995.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:35.829Z,1478895995.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:36.096Z,1478895996.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:36.265Z,1478895996.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:36.669Z,1478895996.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:36.892Z,1478895996.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:37.030Z,1478895997.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:37.434Z,1478895997.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:37.656Z,1478895997.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:37.838Z,1478895997.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:38.258Z,1478895998.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:38.454Z,1478895998.454 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:38.638Z,1478895998.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:39.037Z,1478895999.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:39.249Z,1478895999.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:39.437Z,1478895999.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:39.660Z,1478895999.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:39.835Z,1478895999.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:40.235Z,1478896000.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:40.456Z,1478896000.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:40.637Z,1478896000.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:41.032Z,1478896001.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:41.184Z,1478896001.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:41.434Z,1478896001.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:41.842Z,1478896001.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:41.980Z,1478896001.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:42.234Z,1478896002.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:42.640Z,1478896002.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:42.776Z,1478896002.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:43.034Z,1478896003.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:43.212Z,1478896003.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:43.484Z,1478896003.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:43.843Z,1478896003.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:44.009Z,1478896004.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:44.246Z,1478896004.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:44.642Z,1478896004.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:44.805Z,1478896004.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:45.063Z,1478896005.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:45.217Z,1478896005.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:45.438Z,1478896005.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:45.843Z,1478896005.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:46.012Z,1478896006.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:46.257Z,1478896006.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:46.641Z,1478896006.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:46.808Z,1478896006.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:47.050Z,1478896007.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:47.220Z,1478896007.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:47.489Z,1478896007.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:47.874Z,1478896007.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:48.016Z,1478896008.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:48.306Z,1478896008.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:48.669Z,1478896008.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:48.812Z,1478896008.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:49.061Z,1478896009.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:49.288Z,1478896009.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:49.486Z,1478896009.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:49.856Z,1478896009.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:50.084Z,1478896010.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:50.273Z,1478896010.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:50.676Z,1478896010.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:50.880Z,1478896010.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:51.050Z,1478896011.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:51.453Z,1478896011.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:51.640Z,1478896011.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:51.850Z,1478896011.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:52.262Z,1478896012.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:52.438Z,1478896012.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:52.629Z,1478896012.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:53.058Z,1478896013.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:53.234Z,1478896013.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:53.430Z,1478896013.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:53.652Z,1478896013.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:53.832Z,1478896013.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:54.249Z,1478896014.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:54.448Z,1478896014.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:54.673Z,1478896014.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:55.047Z,1478896015.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:55.164Z,1478896015.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:55.444Z,1478896015.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:55.852Z,1478896015.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:55.960Z,1478896015.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:56.261Z,1478896016.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:56.646Z,1478896016.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:56.757Z,1478896016.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:57.032Z,1478896017.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:57.204Z,1478896017.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:57.466Z,1478896017.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:57.886Z,1478896017.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:58.000Z,1478896018.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:58.247Z,1478896018.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:58.645Z,1478896018.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:58.796Z,1478896018.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:59.030Z,1478896019.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:59.205Z,1478896019.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:26:59.462Z,1478896019.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:26:59.846Z,1478896019.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:00.000Z,1478896020.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:00.240Z,1478896020.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:00.669Z,1478896020.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:00.803Z,1478896020.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:01.054Z,1478896021.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:01.212Z,1478896021.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:01.522Z,1478896021.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:01.846Z,1478896021.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:02.008Z,1478896022.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:02.254Z,1478896022.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:02.710Z,1478896022.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:02.804Z,1478896022.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:03.029Z,1478896023.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:03.264Z,1478896023.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:03.465Z,1478896023.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:03.846Z,1478896023.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:04.060Z,1478896024.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:04.284Z,1478896024.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:04.680Z,1478896024.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:04.856Z,1478896024.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:05.043Z,1478896025.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:05.442Z,1478896025.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:05.640Z,1478896025.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:05.853Z,1478896025.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:06.249Z,1478896026.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:06.436Z,1478896026.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:06.650Z,1478896026.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:07.059Z,1478896027.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:07.233Z,1478896027.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:07.442Z,1478896027.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:07.644Z,1478896027.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:07.848Z,1478896027.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:08.253Z,1478896028.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:08.440Z,1478896028.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:08.646Z,1478896028.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:09.038Z,1478896029.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:09.140Z,1478896029.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:09.442Z,1478896029.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:09.842Z,1478896029.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:09.936Z,1478896029.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:10.250Z,1478896030.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:10.657Z,1478896030.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:10.733Z,1478896030.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:11.026Z,1478896031.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:11.144Z,1478896031.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:11.465Z,1478896031.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:11.845Z,1478896031.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:11.940Z,1478896031.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:12.250Z,1478896032.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:12.647Z,1478896032.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:12.737Z,1478896032.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:13.049Z,1478896033.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:13.188Z,1478896033.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:13.442Z,1478896033.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:13.849Z,1478896033.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:13.984Z,1478896033.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:14.255Z,1478896034.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:14.658Z,1478896034.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:14.780Z,1478896034.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:15.049Z,1478896035.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:15.188Z,1478896035.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:15.470Z,1478896035.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:15.826Z,1478896035.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:15.984Z,1478896035.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:16.257Z,1478896036.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:16.697Z,1478896036.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:16.781Z,1478896036.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:17.078Z,1478896037.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:17.260Z,1478896037.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:17.432Z,1478896037.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:18.056Z,1478896038.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:18.854Z,1478896038.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:19.648Z,1478896039.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:20.444Z,1478896040.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:20.950Z,1478896040.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:21.070Z,1478896041.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:21.252Z,1478896041.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:21.445Z,1478896041.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:21.838Z,1478896041.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:22.048Z,1478896042.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:22.221Z,1478896042.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:22.625Z,1478896042.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:22.845Z,1478896042.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:23.020Z,1478896043.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:23.416Z,1478896043.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:23.644Z,1478896043.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:23.818Z,1478896043.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:24.219Z,1478896044.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:24.442Z,1478896044.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:24.621Z,1478896044.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:25.017Z,1478896045.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:25.236Z,1478896045.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:25.421Z,1478896045.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:25.821Z,1478896045.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:26.032Z,1478896046.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:26.220Z,1478896046.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:26.617Z,1478896046.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:26.828Z,1478896046.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:27.021Z,1478896047.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:27.437Z,1478896047.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:27.624Z,1478896047.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:27.816Z,1478896047.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:28.216Z,1478896048.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:28.420Z,1478896048.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:28.621Z,1478896048.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:29.023Z,1478896049.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:29.216Z,1478896049.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:29.421Z,1478896049.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:29.837Z,1478896049.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:30.012Z,1478896050.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:30.221Z,1478896050.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:30.616Z,1478896050.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:30.808Z,1478896050.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:31.021Z,1478896051.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:31.415Z,1478896051.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:31.604Z,1478896051.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:31.817Z,1478896051.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:32.221Z,1478896052.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:32.400Z,1478896052.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:32.621Z,1478896052.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:33.020Z,1478896053.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:33.196Z,1478896053.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:33.473Z,1478896053.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:33.825Z,1478896053.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:33.992Z,1478896053.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:34.245Z,1478896054.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:34.625Z,1478896054.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:34.788Z,1478896054.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:35.016Z,1478896055.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:35.449Z,1478896055.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:35.584Z,1478896055.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:35.821Z,1478896055.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:36.245Z,1478896056.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:36.380Z,1478896056.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:36.645Z,1478896056.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:37.017Z,1478896057.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:37.176Z,1478896057.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:37.416Z,1478896057.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:37.816Z,1478896057.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:37.972Z,1478896057.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:38.225Z,1478896058.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:38.615Z,1478896058.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:38.768Z,1478896058.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:39.016Z,1478896059.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:39.421Z,1478896059.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:39.564Z,1478896059.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:39.816Z,1478896059.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:40.216Z,1478896060.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:40.360Z,1478896060.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:40.621Z,1478896060.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:41.015Z,1478896061.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:41.156Z,1478896061.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:41.416Z,1478896061.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:41.821Z,1478896061.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:41.952Z,1478896061.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:42.215Z,1478896062.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:42.620Z,1478896062.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:42.748Z,1478896062.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:43.018Z,1478896063.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:43.340Z,1478896063.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:43.415Z,1478896063.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:43.748Z,1478896063.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:43.876Z,1478896063.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:44.156Z,1478896064.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:44.225Z,1478896064.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:44.564Z,1478896064.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:44.625Z,1478896064.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:44.984Z,1478896064.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:45.029Z,1478896065.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:45.420Z,1478896065.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:45.429Z,1478896065.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:45.828Z,1478896065.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:45.836Z,1478896065.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:46.222Z,1478896066.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:46.236Z,1478896066.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:46.625Z,1478896066.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:46.644Z,1478896066.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:47.022Z,1478896067.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:47.052Z,1478896067.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:47.433Z,1478896067.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:47.460Z,1478896067.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:47.826Z,1478896067.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:47.868Z,1478896067.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:48.249Z,1478896068.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:48.276Z,1478896068.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:48.649Z,1478896068.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:48.684Z,1478896068.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:49.025Z,1478896069.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:49.092Z,1478896069.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:49.441Z,1478896069.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:49.552Z,1478896069.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:49.816Z,1478896069.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:50.250Z,1478896070.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:50.348Z,1478896070.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:50.621Z,1478896070.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:51.060Z,1478896071.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:51.080Z,1478896071.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:51.428Z,1478896071.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:51.830Z,1478896071.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:51.876Z,1478896071.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:52.222Z,1478896072.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:52.629Z,1478896072.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:52.672Z,1478896072.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:53.032Z,1478896073.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:53.085Z,1478896073.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:53.424Z,1478896073.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:53.811Z,1478896073.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:53.880Z,1478896073.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:54.217Z,1478896074.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:54.616Z,1478896074.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:54.677Z,1478896074.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:55.029Z,1478896075.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:55.088Z,1478896075.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:55.430Z,1478896075.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:55.820Z,1478896075.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:55.884Z,1478896075.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:56.228Z,1478896076.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:56.669Z,1478896076.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:56.680Z,1478896076.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:57.021Z,1478896077.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:57.092Z,1478896077.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:57.419Z,1478896077.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:57.825Z,1478896077.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:57.888Z,1478896077.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:58.220Z,1478896078.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:58.619Z,1478896078.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:58.684Z,1478896078.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:59.033Z,1478896079.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:59.168Z,1478896079.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:27:59.419Z,1478896079.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:59.823Z,1478896079.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:27:59.964Z,1478896079.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:00.223Z,1478896080.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:00.627Z,1478896080.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:00.760Z,1478896080.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:01.029Z,1478896081.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:01.434Z,1478896081.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:01.532Z,1478896081.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:01.826Z,1478896081.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:02.231Z,1478896082.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:02.328Z,1478896082.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:02.657Z,1478896082.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:03.053Z,1478896083.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:03.125Z,1478896083.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:03.418Z,1478896083.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:03.536Z,1478896083.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:03.847Z,1478896083.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:04.219Z,1478896084.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:04.332Z,1478896084.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:04.717Z,1478896084.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:05.064Z,1478896085.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:05.081Z,1478896085.081 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:05.082Z,1478896085.082 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 292
2016-11-11T20:28:05.082Z,1478896085.082 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:28:05.098Z,1478896085.098 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:05.098Z,1478896085.098 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 292
2016-11-11T20:28:05.098Z,1478896085.098 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:28:05.116Z,1478896085.116 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:05.117Z,1478896085.117 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 292
2016-11-11T20:28:05.117Z,1478896085.117 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:28:05.160Z,1478896085.159 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:28:05.160Z,1478896085.160 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:28:05.160Z,1478896085.160 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:28:05.448Z,1478896085.448 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:28:05.448Z,1478896085.448 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 292
2016-11-11T20:28:05.449Z,1478896085.449 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:28:05.449Z,1478896085.449 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 292
2016-11-11T20:28:05.449Z,1478896085.450 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:28:05.450Z,1478896085.450 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 292
2016-11-11T20:28:05.830Z,1478896085.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:28:05.830Z,1478896085.830 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:28:05.831Z,1478896085.831 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:28:05.835Z,1478896085.835 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:28:05.836Z,1478896085.836 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:28:05.836Z,1478896085.836 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:28:05.837Z,1478896085.837 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:28:05.837Z,1478896085.837 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:28:05.837Z,1478896085.837 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:28:05.860Z,1478896085.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:06.240Z,1478896086.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:06.656Z,1478896086.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:06.696Z,1478896086.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:07.029Z,1478896087.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:07.068Z,1478896087.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:07.429Z,1478896087.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:07.821Z,1478896087.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:07.864Z,1478896087.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:08.228Z,1478896088.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:08.661Z,1478896088.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:08.718Z,1478896088.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:09.049Z,1478896089.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:09.072Z,1478896089.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:09.425Z,1478896089.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:09.829Z,1478896089.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:09.868Z,1478896089.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:10.219Z,1478896090.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:10.665Z,1478896090.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:10.682Z,1478896090.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:11.020Z,1478896091.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:11.076Z,1478896091.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:11.420Z,1478896091.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:11.828Z,1478896091.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:11.873Z,1478896091.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:12.229Z,1478896092.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:12.620Z,1478896092.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:12.668Z,1478896092.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:13.031Z,1478896093.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:13.144Z,1478896093.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:13.426Z,1478896093.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:13.833Z,1478896093.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:13.940Z,1478896093.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:14.231Z,1478896094.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:14.624Z,1478896094.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:14.736Z,1478896094.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:15.012Z,1478896095.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:15.425Z,1478896095.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:15.516Z,1478896095.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:15.819Z,1478896095.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:16.220Z,1478896096.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:16.312Z,1478896096.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:16.625Z,1478896096.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:17.024Z,1478896097.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:17.109Z,1478896097.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:17.469Z,1478896097.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:17.520Z,1478896097.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:17.835Z,1478896097.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:18.317Z,1478896098.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:19.040Z,1478896099.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:19.836Z,1478896099.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:20.632Z,1478896100.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:21.044Z,1478896101.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:21.486Z,1478896101.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:21.593Z,1478896101.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:21.840Z,1478896101.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:22.001Z,1478896102.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:22.359Z,1478896102.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:22.637Z,1478896102.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:22.809Z,1478896102.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:23.048Z,1478896103.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:23.158Z,1478896103.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:23.565Z,1478896103.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:23.844Z,1478896103.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:23.959Z,1478896103.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:24.363Z,1478896104.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:24.641Z,1478896104.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:24.767Z,1478896104.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:25.052Z,1478896105.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:25.169Z,1478896105.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:25.563Z,1478896105.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:25.848Z,1478896105.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:25.970Z,1478896105.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:26.360Z,1478896106.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:26.646Z,1478896106.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:26.793Z,1478896106.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:27.165Z,1478896107.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:27.184Z,1478896107.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:27.559Z,1478896107.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:27.963Z,1478896107.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:27.988Z,1478896107.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:28.358Z,1478896108.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:28.759Z,1478896108.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:28.796Z,1478896108.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:29.170Z,1478896109.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:29.484Z,1478896109.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:29.567Z,1478896109.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:29.962Z,1478896109.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:30.280Z,1478896110.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:30.368Z,1478896110.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:30.763Z,1478896110.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:31.077Z,1478896111.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:31.166Z,1478896111.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:31.488Z,1478896111.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:31.562Z,1478896111.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:31.971Z,1478896111.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:32.284Z,1478896112.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:32.368Z,1478896112.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:32.765Z,1478896112.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:33.008Z,1478896113.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:33.174Z,1478896113.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:33.568Z,1478896113.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:33.804Z,1478896113.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:33.973Z,1478896113.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:34.368Z,1478896114.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:34.601Z,1478896114.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:34.825Z,1478896114.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:35.080Z,1478896115.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:35.168Z,1478896115.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:35.572Z,1478896115.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:35.876Z,1478896115.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:35.985Z,1478896115.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:36.372Z,1478896116.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:36.672Z,1478896116.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:36.820Z,1478896116.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:37.080Z,1478896117.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:37.181Z,1478896117.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:37.579Z,1478896117.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:37.876Z,1478896117.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:37.981Z,1478896117.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:38.352Z,1478896118.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:38.672Z,1478896118.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:38.782Z,1478896118.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:39.080Z,1478896119.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:39.157Z,1478896119.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:39.552Z,1478896119.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:39.876Z,1478896119.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:39.986Z,1478896119.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:40.357Z,1478896120.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:40.673Z,1478896120.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:40.779Z,1478896120.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:41.104Z,1478896121.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:41.169Z,1478896121.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:41.568Z,1478896121.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:41.901Z,1478896121.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:41.969Z,1478896121.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:42.371Z,1478896122.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:42.696Z,1478896122.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:42.766Z,1478896122.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:43.172Z,1478896123.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:43.464Z,1478896123.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:43.571Z,1478896123.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:43.975Z,1478896123.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:44.260Z,1478896124.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:44.372Z,1478896124.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:44.768Z,1478896124.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:45.057Z,1478896125.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:45.165Z,1478896125.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:45.468Z,1478896125.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:45.576Z,1478896125.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:45.981Z,1478896125.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:46.264Z,1478896126.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:46.361Z,1478896126.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:46.757Z,1478896126.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:46.988Z,1478896126.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:47.160Z,1478896127.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:47.558Z,1478896127.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:47.784Z,1478896127.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:47.969Z,1478896127.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:48.359Z,1478896128.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:48.581Z,1478896128.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:48.767Z,1478896128.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:48.992Z,1478896128.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:49.185Z,1478896129.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:49.589Z,1478896129.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:49.788Z,1478896129.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:49.972Z,1478896129.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:50.389Z,1478896130.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:50.596Z,1478896130.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:50.776Z,1478896130.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:51.020Z,1478896131.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:51.186Z,1478896131.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:51.589Z,1478896131.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:51.816Z,1478896131.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:52.038Z,1478896132.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:52.380Z,1478896132.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:52.612Z,1478896132.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:52.776Z,1478896132.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:53.020Z,1478896133.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:53.151Z,1478896133.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:53.552Z,1478896133.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:53.817Z,1478896133.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:53.956Z,1478896133.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:54.358Z,1478896134.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:54.613Z,1478896134.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:54.768Z,1478896134.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:55.084Z,1478896135.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:55.161Z,1478896135.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:55.558Z,1478896135.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:55.880Z,1478896135.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:55.965Z,1478896135.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:56.359Z,1478896136.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:56.676Z,1478896136.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:56.773Z,1478896136.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:57.161Z,1478896137.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:57.441Z,1478896137.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:57.562Z,1478896137.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:57.966Z,1478896137.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:58.236Z,1478896138.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:58.369Z,1478896138.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:58.761Z,1478896138.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:59.033Z,1478896139.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:59.169Z,1478896139.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:59.444Z,1478896139.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:28:59.569Z,1478896139.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:28:59.969Z,1478896139.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:00.241Z,1478896140.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:00.360Z,1478896140.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:00.768Z,1478896140.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:00.968Z,1478896140.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:01.164Z,1478896141.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:01.569Z,1478896141.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:01.764Z,1478896141.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:01.969Z,1478896141.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:02.365Z,1478896142.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:02.561Z,1478896142.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:02.773Z,1478896142.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:02.972Z,1478896142.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:03.169Z,1478896143.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:03.609Z,1478896143.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:03.768Z,1478896143.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:03.950Z,1478896143.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:04.377Z,1478896144.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:04.565Z,1478896144.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:04.801Z,1478896144.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:04.980Z,1478896144.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:05.161Z,1478896145.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:05.591Z,1478896145.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:05.776Z,1478896145.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:05.989Z,1478896145.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:06.365Z,1478896146.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:06.574Z,1478896146.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:06.760Z,1478896146.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:06.988Z,1478896146.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:07.159Z,1478896147.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:07.565Z,1478896147.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:07.784Z,1478896147.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:07.969Z,1478896147.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:08.359Z,1478896148.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:08.580Z,1478896148.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:08.759Z,1478896148.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:09.060Z,1478896149.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:09.168Z,1478896149.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:09.564Z,1478896149.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:09.856Z,1478896149.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:09.973Z,1478896149.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:10.367Z,1478896150.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:10.652Z,1478896150.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:10.762Z,1478896150.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:11.165Z,1478896151.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:11.416Z,1478896151.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:11.568Z,1478896151.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:11.968Z,1478896151.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:12.212Z,1478896152.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:12.366Z,1478896152.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:12.762Z,1478896152.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:13.009Z,1478896153.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:13.161Z,1478896153.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:13.420Z,1478896153.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:13.568Z,1478896153.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:13.964Z,1478896153.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:14.216Z,1478896154.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:14.369Z,1478896154.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:14.773Z,1478896154.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:14.944Z,1478896154.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:15.168Z,1478896155.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:15.576Z,1478896155.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:15.740Z,1478896155.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:15.975Z,1478896155.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:16.365Z,1478896156.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:16.382Z,1478896156.382 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T20:29:16.383Z,1478896156.383 [Default:CheckIn:C.Wait] Stopped
2016-11-11T20:29:16.383Z,1478896156.383 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T20:29:16.383Z,1478896156.383 [Default:CheckIn:D] Running Loop=1
2016-11-11T20:29:16.537Z,1478896156.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:16.773Z,1478896156.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:16.782Z,1478896156.782 [Default:CheckIn:D] Stopped
2016-11-11T20:29:16.782Z,1478896156.782 [Default:CheckIn:E] Running Loop=1
2016-11-11T20:29:16.968Z,1478896156.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:17.173Z,1478896157.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:17.182Z,1478896157.182 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 939.257878 min 
2016-11-11T20:29:17.182Z,1478896157.182 [Default:CheckIn:E] Stopped
2016-11-11T20:29:17.182Z,1478896157.182 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T20:29:17.182Z,1478896157.182 [Default:CheckIn] Stopped
2016-11-11T20:29:17.183Z,1478896157.182 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T20:29:17.183Z,1478896157.183 [Default:CheckIn](INFO): Running loop #91
2016-11-11T20:29:17.183Z,1478896157.183 [Default:CheckIn] Running Loop=91
2016-11-11T20:29:17.183Z,1478896157.183 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T20:29:17.183Z,1478896157.183 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T20:29:17.573Z,1478896157.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:17.766Z,1478896157.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:17.924Z,1478896157.924 [NAL9602](INFO): Powering up
2016-11-11T20:29:18.005Z,1478896158.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:18.561Z,1478896158.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:18.980Z,1478896158.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:19.776Z,1478896159.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:20.572Z,1478896160.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:20.980Z,1478896160.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:21.404Z,1478896161.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:21.536Z,1478896161.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:21.776Z,1478896161.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:21.913Z,1478896161.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:22.339Z,1478896162.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:22.572Z,1478896162.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:22.727Z,1478896162.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:23.052Z,1478896163.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:23.134Z,1478896163.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:23.537Z,1478896163.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:23.850Z,1478896163.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:23.916Z,1478896163.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:24.319Z,1478896164.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:24.644Z,1478896164.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:24.721Z,1478896164.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:25.128Z,1478896165.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:25.396Z,1478896165.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:25.519Z,1478896165.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:25.921Z,1478896165.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:26.192Z,1478896166.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:26.319Z,1478896166.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:26.719Z,1478896166.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:26.989Z,1478896166.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:27.100Z,1478896167.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:27.400Z,1478896167.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:27.509Z,1478896167.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:27.909Z,1478896167.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:28.196Z,1478896168.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:28.307Z,1478896168.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:28.717Z,1478896168.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:28.928Z,1478896168.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:29.073Z,1478896169.073 [NAL9602](INFO): NAL9602 initialized
2016-11-11T20:29:29.117Z,1478896169.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:29.509Z,1478896169.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:29.724Z,1478896169.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:29.921Z,1478896169.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:30.322Z,1478896170.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:30.521Z,1478896170.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:30.719Z,1478896170.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:30.932Z,1478896170.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:31.113Z,1478896171.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:31.520Z,1478896171.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:31.728Z,1478896171.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:31.920Z,1478896171.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:32.321Z,1478896172.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:32.525Z,1478896172.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:32.725Z,1478896172.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:32.936Z,1478896172.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:33.124Z,1478896173.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:33.510Z,1478896173.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:33.732Z,1478896173.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:33.914Z,1478896173.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:34.313Z,1478896174.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:34.529Z,1478896174.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:34.709Z,1478896174.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:34.944Z,1478896174.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:35.116Z,1478896175.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:35.573Z,1478896175.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:35.742Z,1478896175.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:35.921Z,1478896175.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:36.356Z,1478896176.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:36.536Z,1478896176.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:36.710Z,1478896176.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:37.024Z,1478896177.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:37.147Z,1478896177.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:37.556Z,1478896177.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:37.820Z,1478896177.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:37.918Z,1478896177.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:38.317Z,1478896178.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:38.616Z,1478896178.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:38.713Z,1478896178.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:39.118Z,1478896179.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:39.376Z,1478896179.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:39.517Z,1478896179.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:39.910Z,1478896179.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:40.172Z,1478896180.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:40.321Z,1478896180.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:40.715Z,1478896180.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:40.969Z,1478896180.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:41.110Z,1478896181.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:41.380Z,1478896181.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:41.510Z,1478896181.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:41.921Z,1478896181.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:42.176Z,1478896182.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:42.310Z,1478896182.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:42.714Z,1478896182.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:42.904Z,1478896182.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:43.115Z,1478896183.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:43.510Z,1478896183.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:43.700Z,1478896183.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:43.914Z,1478896183.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:44.321Z,1478896184.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:44.497Z,1478896184.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:44.728Z,1478896184.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:44.912Z,1478896184.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:45.105Z,1478896185.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:45.501Z,1478896185.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:45.708Z,1478896185.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:45.905Z,1478896185.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:46.309Z,1478896186.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:46.505Z,1478896186.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:46.713Z,1478896186.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:46.940Z,1478896186.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:47.113Z,1478896187.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:47.507Z,1478896187.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:47.736Z,1478896187.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:47.920Z,1478896187.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:48.313Z,1478896188.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:48.532Z,1478896188.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:48.717Z,1478896188.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:48.948Z,1478896188.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:49.121Z,1478896189.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:49.561Z,1478896189.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:49.744Z,1478896189.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:49.923Z,1478896189.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:50.333Z,1478896190.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:50.540Z,1478896190.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:50.725Z,1478896190.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:50.000Z,1478896191.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:51.133Z,1478896191.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:51.534Z,1478896191.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:51.796Z,1478896191.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:51.925Z,1478896191.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:52.300Z,1478896192.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:52.592Z,1478896192.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:52.709Z,1478896192.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:53.133Z,1478896193.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:53.356Z,1478896193.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:53.513Z,1478896193.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:53.908Z,1478896193.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:54.152Z,1478896194.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:54.311Z,1478896194.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:54.713Z,1478896194.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:54.949Z,1478896194.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:55.108Z,1478896195.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:55.360Z,1478896195.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:55.517Z,1478896195.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:55.918Z,1478896195.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:56.156Z,1478896196.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:56.317Z,1478896196.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:56.713Z,1478896196.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:56.884Z,1478896196.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:57.121Z,1478896197.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:57.510Z,1478896197.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:57.680Z,1478896197.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:57.913Z,1478896197.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:58.318Z,1478896198.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:58.496Z,1478896198.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:58.717Z,1478896198.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:58.912Z,1478896198.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:59.112Z,1478896199.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:59.521Z,1478896199.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:29:59.708Z,1478896199.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:29:59.925Z,1478896199.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:00.305Z,1478896200.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:00.505Z,1478896200.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:00.700Z,1478896200.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:00.912Z,1478896200.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:01.076Z,1478896201.076 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-11T20:30:01.151Z,1478896201.151 [NAL9602](FAULT): received: 
+CSQ:0

OK9, 2, 0, 0, 0

OK
2016-11-11T20:30:01.151Z,1478896201.151 [NAL9602] Data Fault, FailCount= 2
2016-11-11T20:30:01.151Z,1478896201.151 [NAL9602](ERROR): Data Fault
2016-11-11T20:30:01.214Z,1478896201.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:01.260Z,1478896201.260 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T20:30:01.477Z,1478896201.477 [NAL9602](INFO): Powering down
2016-11-11T20:30:01.522Z,1478896201.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:01.708Z,1478896201.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:01.911Z,1478896201.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:02.308Z,1478896202.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:02.328Z,1478896202.328 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T20:30:02.329Z,1478896202.329 [NAL9602] No Fault, FailCount= 2
2016-11-11T20:30:02.504Z,1478896202.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:02.721Z,1478896202.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:02.912Z,1478896202.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:03.121Z,1478896203.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:03.565Z,1478896203.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:03.708Z,1478896203.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:03.927Z,1478896203.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:04.337Z,1478896204.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:04.504Z,1478896204.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:04.721Z,1478896204.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:04.984Z,1478896204.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:05.130Z,1478896205.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:05.537Z,1478896205.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:05.780Z,1478896205.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:05.900Z,1478896205.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:06.305Z,1478896206.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:06.576Z,1478896206.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:06.669Z,1478896206.669 [NAL9602](INFO): Powering up NAL9602
2016-11-11T20:30:06.712Z,1478896206.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:07.112Z,1478896207.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:07.340Z,1478896207.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:07.506Z,1478896207.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:07.906Z,1478896207.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:08.138Z,1478896208.138 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:08.308Z,1478896208.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:08.708Z,1478896208.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:08.952Z,1478896208.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:09.113Z,1478896209.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:09.364Z,1478896209.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:09.509Z,1478896209.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:09.922Z,1478896209.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:10.160Z,1478896210.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:10.313Z,1478896210.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:10.708Z,1478896210.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:10.860Z,1478896210.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:11.111Z,1478896211.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:11.518Z,1478896211.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:11.656Z,1478896211.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:11.908Z,1478896211.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:12.314Z,1478896212.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:12.453Z,1478896212.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:12.709Z,1478896212.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:12.864Z,1478896212.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:13.110Z,1478896213.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:13.510Z,1478896213.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:13.660Z,1478896213.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:13.926Z,1478896213.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:14.317Z,1478896214.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:14.457Z,1478896214.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:14.705Z,1478896214.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:14.872Z,1478896214.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:15.105Z,1478896215.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:15.508Z,1478896215.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:15.668Z,1478896215.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:15.912Z,1478896215.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:16.307Z,1478896216.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:16.465Z,1478896216.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:16.707Z,1478896216.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:16.887Z,1478896216.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:17.153Z,1478896217.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:17.549Z,1478896217.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:17.684Z,1478896217.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:17.869Z,1478896217.869 [NAL9602](INFO): NAL9602 initialized
2016-11-11T20:30:17.914Z,1478896217.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:18.317Z,1478896218.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:18.480Z,1478896218.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:18.944Z,1478896218.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:19.740Z,1478896219.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:20.537Z,1478896220.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:21.312Z,1478896221.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:21.713Z,1478896221.713 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T20:30:21.713Z,1478896221.713 [NAL9602] Data Fault, FailCount= 3
2016-11-11T20:30:21.713Z,1478896221.713 [NAL9602](ERROR): Data Fault
2016-11-11T20:30:21.804Z,1478896221.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:21.825Z,1478896221.825 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T20:30:21.893Z,1478896221.893 [NAL9602](INFO): Powering down
2016-11-11T20:30:21.938Z,1478896221.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:22.108Z,1478896222.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:22.313Z,1478896222.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:22.711Z,1478896222.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:22.731Z,1478896222.731 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T20:30:22.731Z,1478896222.731 [NAL9602] No Fault, FailCount= 3
2016-11-11T20:30:22.905Z,1478896222.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:23.080Z,1478896223.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:23.316Z,1478896223.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:23.484Z,1478896223.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:23.884Z,1478896223.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:24.112Z,1478896224.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:24.291Z,1478896224.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:24.685Z,1478896224.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:24.832Z,1478896224.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:25.089Z,1478896225.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:25.489Z,1478896225.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:25.628Z,1478896225.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:25.881Z,1478896225.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:26.274Z,1478896226.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:26.425Z,1478896226.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:26.684Z,1478896226.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:26.836Z,1478896226.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:27.048Z,1478896227.048 [NAL9602](INFO): Powering up NAL9602
2016-11-11T20:30:27.082Z,1478896227.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:27.486Z,1478896227.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:27.632Z,1478896227.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:27.879Z,1478896227.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:28.286Z,1478896228.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:28.439Z,1478896228.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:28.685Z,1478896228.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:28.856Z,1478896228.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:29.080Z,1478896229.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:29.489Z,1478896229.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:29.652Z,1478896229.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:29.890Z,1478896229.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:30.287Z,1478896230.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:30.448Z,1478896230.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:30.682Z,1478896230.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:30.856Z,1478896230.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:31.090Z,1478896231.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:31.482Z,1478896231.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:31.652Z,1478896231.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:31.885Z,1478896231.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:32.290Z,1478896232.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:32.449Z,1478896232.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:32.688Z,1478896232.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:32.948Z,1478896232.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:33.093Z,1478896233.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:33.492Z,1478896233.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:33.744Z,1478896233.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:33.888Z,1478896233.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:34.291Z,1478896234.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:34.540Z,1478896234.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:34.737Z,1478896234.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:35.072Z,1478896235.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:35.300Z,1478896235.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:35.477Z,1478896235.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:35.902Z,1478896235.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:36.096Z,1478896236.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:36.280Z,1478896236.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:36.709Z,1478896236.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:36.893Z,1478896236.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:37.111Z,1478896237.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:37.304Z,1478896237.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:37.487Z,1478896237.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:37.848Z,1478896237.848 [NAL9602](INFO): NAL9602 initialized
2016-11-11T20:30:37.885Z,1478896237.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:38.102Z,1478896238.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:38.279Z,1478896238.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:38.701Z,1478896238.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:38.812Z,1478896238.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:39.093Z,1478896239.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:39.497Z,1478896239.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:39.608Z,1478896239.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:39.889Z,1478896239.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:40.281Z,1478896240.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:40.405Z,1478896240.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:40.689Z,1478896240.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:40.816Z,1478896240.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:41.095Z,1478896241.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:41.498Z,1478896241.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:41.612Z,1478896241.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:41.931Z,1478896241.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:42.289Z,1478896242.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:42.412Z,1478896242.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:42.696Z,1478896242.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:42.828Z,1478896242.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:43.096Z,1478896243.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:43.473Z,1478896243.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:43.624Z,1478896243.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:43.877Z,1478896243.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:44.277Z,1478896244.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:44.421Z,1478896244.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:44.705Z,1478896244.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:44.832Z,1478896244.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:45.085Z,1478896245.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:45.478Z,1478896245.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:45.628Z,1478896245.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:45.887Z,1478896245.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:46.297Z,1478896246.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:46.424Z,1478896246.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:46.701Z,1478896246.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:46.928Z,1478896246.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:47.091Z,1478896247.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:47.482Z,1478896247.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:47.724Z,1478896247.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:47.889Z,1478896247.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:48.293Z,1478896248.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:48.520Z,1478896248.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:48.709Z,1478896248.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:49.114Z,1478896249.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:49.260Z,1478896249.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:49.493Z,1478896249.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:49.893Z,1478896249.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:50.056Z,1478896250.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:50.317Z,1478896250.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:50.693Z,1478896250.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:50.853Z,1478896250.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:51.141Z,1478896251.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:51.264Z,1478896251.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:51.510Z,1478896251.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:51.902Z,1478896251.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:52.060Z,1478896252.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:52.299Z,1478896252.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:52.683Z,1478896252.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:52.788Z,1478896252.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:53.079Z,1478896253.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:53.482Z,1478896253.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:53.584Z,1478896253.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:53.879Z,1478896253.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:54.281Z,1478896254.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:54.381Z,1478896254.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:54.688Z,1478896254.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:54.792Z,1478896254.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:55.092Z,1478896255.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:55.489Z,1478896255.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:55.588Z,1478896255.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:55.891Z,1478896255.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:56.301Z,1478896256.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:56.384Z,1478896256.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:56.706Z,1478896256.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:56.796Z,1478896256.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:57.107Z,1478896257.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:57.486Z,1478896257.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:57.592Z,1478896257.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:57.880Z,1478896257.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:58.282Z,1478896258.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:58.389Z,1478896258.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:58.697Z,1478896258.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:58.800Z,1478896258.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:59.089Z,1478896259.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:59.485Z,1478896259.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:30:59.596Z,1478896259.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:30:59.897Z,1478896259.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:00.301Z,1478896260.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:00.393Z,1478896260.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:00.684Z,1478896260.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:00.884Z,1478896260.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:01.081Z,1478896261.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:01.491Z,1478896261.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:01.680Z,1478896261.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:01.893Z,1478896261.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:02.294Z,1478896262.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:02.482Z,1478896262.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:02.698Z,1478896262.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:03.089Z,1478896263.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:03.240Z,1478896263.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:03.522Z,1478896263.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:03.917Z,1478896263.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:04.036Z,1478896264.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:04.292Z,1478896264.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:04.692Z,1478896264.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:04.833Z,1478896264.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:05.098Z,1478896265.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:05.244Z,1478896265.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:05.492Z,1478896265.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:05.902Z,1478896265.902 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:05.902Z,1478896265.902 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 293
2016-11-11T20:31:05.902Z,1478896265.902 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:31:05.908Z,1478896265.908 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:05.909Z,1478896265.909 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 293
2016-11-11T20:31:05.909Z,1478896265.909 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:31:05.911Z,1478896265.911 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:05.911Z,1478896265.911 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 293
2016-11-11T20:31:05.911Z,1478896265.911 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:31:05.936Z,1478896265.936 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:31:05.937Z,1478896265.937 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:31:05.937Z,1478896265.937 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:31:06.040Z,1478896266.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:06.403Z,1478896266.403 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:31:06.411Z,1478896266.411 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 293
2016-11-11T20:31:06.412Z,1478896266.412 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:31:06.412Z,1478896266.412 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 293
2016-11-11T20:31:06.413Z,1478896266.413 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:31:06.413Z,1478896266.413 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 293
2016-11-11T20:31:06.700Z,1478896266.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:31:06.700Z,1478896266.700 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:31:06.701Z,1478896266.701 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:31:06.705Z,1478896266.705 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:31:06.706Z,1478896266.706 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:31:06.706Z,1478896266.706 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:31:06.707Z,1478896266.707 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:31:06.707Z,1478896266.707 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:31:06.708Z,1478896266.708 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:31:06.776Z,1478896266.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:07.103Z,1478896267.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:07.501Z,1478896267.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:07.572Z,1478896267.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:07.896Z,1478896267.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:08.293Z,1478896268.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:08.369Z,1478896268.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:08.677Z,1478896268.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:08.796Z,1478896268.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:09.081Z,1478896269.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:09.475Z,1478896269.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:09.593Z,1478896269.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:09.880Z,1478896269.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:10.284Z,1478896270.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:10.388Z,1478896270.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:10.692Z,1478896270.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:10.796Z,1478896270.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:11.089Z,1478896271.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:11.482Z,1478896271.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:11.592Z,1478896271.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:11.906Z,1478896271.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:12.295Z,1478896272.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:12.389Z,1478896272.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:12.704Z,1478896272.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:12.800Z,1478896272.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:13.097Z,1478896273.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:13.485Z,1478896273.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:13.596Z,1478896273.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:13.897Z,1478896273.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:14.277Z,1478896274.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:14.392Z,1478896274.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:14.681Z,1478896274.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:14.880Z,1478896274.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:15.089Z,1478896275.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:15.485Z,1478896275.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:15.678Z,1478896275.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:15.881Z,1478896275.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:16.283Z,1478896276.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:16.472Z,1478896276.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:16.694Z,1478896276.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:17.091Z,1478896277.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:17.216Z,1478896277.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:17.488Z,1478896277.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:17.888Z,1478896277.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:18.012Z,1478896278.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:18.329Z,1478896278.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:18.692Z,1478896278.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:18.810Z,1478896278.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:19.220Z,1478896279.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:20.016Z,1478896280.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:20.744Z,1478896280.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:21.540Z,1478896281.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:22.114Z,1478896282.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:22.261Z,1478896282.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:22.337Z,1478896282.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:22.665Z,1478896282.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:22.748Z,1478896282.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:23.070Z,1478896283.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:23.421Z,1478896283.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:23.544Z,1478896283.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:23.809Z,1478896283.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:24.209Z,1478896284.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:24.341Z,1478896284.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:24.608Z,1478896284.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:24.760Z,1478896284.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:25.011Z,1478896285.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:25.413Z,1478896285.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:25.556Z,1478896285.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:25.809Z,1478896285.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:26.217Z,1478896286.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:26.353Z,1478896286.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:26.619Z,1478896286.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:26.764Z,1478896286.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:27.022Z,1478896287.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:27.422Z,1478896287.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:27.560Z,1478896287.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:27.817Z,1478896287.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:28.232Z,1478896288.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:28.356Z,1478896288.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:28.625Z,1478896288.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:28.852Z,1478896288.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:29.025Z,1478896289.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:29.428Z,1478896289.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:29.648Z,1478896289.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:29.820Z,1478896289.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:30.221Z,1478896290.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:30.444Z,1478896290.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:30.621Z,1478896290.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:31.021Z,1478896291.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:31.196Z,1478896291.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:31.421Z,1478896291.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:31.821Z,1478896291.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:31.992Z,1478896291.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:32.222Z,1478896292.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:32.605Z,1478896292.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:32.789Z,1478896292.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:33.021Z,1478896293.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:33.200Z,1478896293.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:33.421Z,1478896293.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:33.819Z,1478896293.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:33.996Z,1478896293.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:34.236Z,1478896294.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:34.627Z,1478896294.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:34.732Z,1478896294.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:35.089Z,1478896295.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:35.419Z,1478896295.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:35.528Z,1478896295.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:35.849Z,1478896295.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:36.226Z,1478896296.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:36.324Z,1478896296.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:36.653Z,1478896296.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:36.736Z,1478896296.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:37.045Z,1478896297.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:37.408Z,1478896297.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:37.532Z,1478896297.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:37.807Z,1478896297.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:38.225Z,1478896298.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:38.329Z,1478896298.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:38.641Z,1478896298.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:38.740Z,1478896298.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:39.016Z,1478896299.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:39.413Z,1478896299.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:39.536Z,1478896299.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:39.808Z,1478896299.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:40.208Z,1478896300.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:40.333Z,1478896300.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:40.617Z,1478896300.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:40.746Z,1478896300.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:41.050Z,1478896301.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:41.445Z,1478896301.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:41.540Z,1478896301.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:41.830Z,1478896301.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:42.228Z,1478896302.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:42.336Z,1478896302.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:42.631Z,1478896302.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:42.836Z,1478896302.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:43.021Z,1478896303.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:43.437Z,1478896303.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:43.632Z,1478896303.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:43.833Z,1478896303.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:44.214Z,1478896304.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:44.428Z,1478896304.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:44.622Z,1478896304.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:45.031Z,1478896305.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:45.212Z,1478896305.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:45.417Z,1478896305.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:45.854Z,1478896305.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:46.008Z,1478896306.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:46.220Z,1478896306.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:46.638Z,1478896306.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:46.804Z,1478896306.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:47.012Z,1478896307.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:47.212Z,1478896307.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:47.435Z,1478896307.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:47.836Z,1478896307.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:48.008Z,1478896308.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:48.237Z,1478896308.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:48.666Z,1478896308.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:48.732Z,1478896308.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:49.090Z,1478896309.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:49.417Z,1478896309.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:49.528Z,1478896309.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:49.837Z,1478896309.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:50.324Z,1478896310.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:50.334Z,1478896310.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:50.622Z,1478896310.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:50.732Z,1478896310.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:51.061Z,1478896311.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:51.445Z,1478896311.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:51.528Z,1478896311.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:51.814Z,1478896311.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:52.218Z,1478896312.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:52.325Z,1478896312.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:52.637Z,1478896312.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:52.736Z,1478896312.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:53.009Z,1478896313.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:53.421Z,1478896313.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:53.533Z,1478896313.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:53.813Z,1478896313.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:54.229Z,1478896314.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:54.328Z,1478896314.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:54.611Z,1478896314.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:54.737Z,1478896314.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:55.079Z,1478896315.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:55.442Z,1478896315.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:55.532Z,1478896315.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:55.818Z,1478896315.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:56.233Z,1478896316.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:56.328Z,1478896316.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:56.620Z,1478896316.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:57.016Z,1478896317.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:57.124Z,1478896317.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:57.417Z,1478896317.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:57.820Z,1478896317.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:57.920Z,1478896317.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:58.217Z,1478896318.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:58.661Z,1478896318.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:58.717Z,1478896318.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:59.033Z,1478896319.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:59.433Z,1478896319.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:31:59.512Z,1478896319.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:31:59.826Z,1478896319.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:00.205Z,1478896320.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:00.308Z,1478896320.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:00.613Z,1478896320.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:00.776Z,1478896320.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:01.021Z,1478896321.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:01.184Z,1478896321.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:01.448Z,1478896321.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:01.592Z,1478896321.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:01.806Z,1478896321.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:02.308Z,1478896322.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:02.388Z,1478896322.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:02.617Z,1478896322.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:02.796Z,1478896322.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:03.007Z,1478896323.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:03.465Z,1478896323.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:03.592Z,1478896323.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:03.857Z,1478896323.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:04.296Z,1478896324.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:04.388Z,1478896324.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:04.662Z,1478896324.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:04.796Z,1478896324.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:05.016Z,1478896325.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:05.470Z,1478896325.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:05.592Z,1478896325.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:05.861Z,1478896325.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:06.218Z,1478896326.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:06.388Z,1478896326.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:06.624Z,1478896326.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:06.796Z,1478896326.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:07.040Z,1478896327.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:07.473Z,1478896327.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:07.592Z,1478896327.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:07.842Z,1478896327.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:08.266Z,1478896328.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:08.388Z,1478896328.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:08.630Z,1478896328.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:08.797Z,1478896328.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:09.034Z,1478896329.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:09.433Z,1478896329.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:09.592Z,1478896329.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:09.827Z,1478896329.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:10.218Z,1478896330.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:10.389Z,1478896330.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:10.628Z,1478896330.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:10.800Z,1478896330.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:11.003Z,1478896331.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:11.418Z,1478896331.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:11.596Z,1478896331.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:11.843Z,1478896331.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:12.222Z,1478896332.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:12.393Z,1478896332.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:12.625Z,1478896332.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:13.017Z,1478896333.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:13.148Z,1478896333.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:13.432Z,1478896333.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:13.836Z,1478896333.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:13.944Z,1478896333.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:14.242Z,1478896334.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:14.646Z,1478896334.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:14.741Z,1478896334.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:15.026Z,1478896335.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:15.153Z,1478896335.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:15.427Z,1478896335.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:15.833Z,1478896335.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:15.948Z,1478896335.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:16.264Z,1478896336.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:16.625Z,1478896336.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:16.692Z,1478896336.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:17.029Z,1478896337.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:17.431Z,1478896337.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:17.488Z,1478896337.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:17.873Z,1478896337.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:18.251Z,1478896338.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:18.284Z,1478896338.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:18.661Z,1478896338.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:18.692Z,1478896338.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:19.034Z,1478896339.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:19.488Z,1478896339.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:20.284Z,1478896340.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:20.693Z,1478896340.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:21.488Z,1478896341.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:22.285Z,1478896342.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:22.696Z,1478896342.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:23.492Z,1478896343.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:24.225Z,1478896344.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:24.288Z,1478896344.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:24.428Z,1478896344.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:24.748Z,1478896344.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:24.804Z,1478896344.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:25.168Z,1478896345.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:25.544Z,1478896345.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:25.561Z,1478896345.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:25.957Z,1478896345.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:26.340Z,1478896346.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:26.342Z,1478896346.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:26.784Z,1478896346.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:27.116Z,1478896347.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:27.157Z,1478896347.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:27.548Z,1478896347.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:27.912Z,1478896347.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:28.001Z,1478896348.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:28.350Z,1478896348.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:28.708Z,1478896348.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:28.784Z,1478896348.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:29.120Z,1478896349.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:29.181Z,1478896349.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:29.571Z,1478896349.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:29.916Z,1478896349.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:29.957Z,1478896349.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:30.353Z,1478896350.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:30.636Z,1478896350.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:30.744Z,1478896350.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:31.144Z,1478896351.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:31.432Z,1478896351.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:31.554Z,1478896351.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:31.944Z,1478896351.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:32.229Z,1478896352.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:32.353Z,1478896352.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:32.640Z,1478896352.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:32.751Z,1478896352.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:33.146Z,1478896353.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:33.436Z,1478896353.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:33.555Z,1478896353.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:33.962Z,1478896353.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:34.233Z,1478896354.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:34.369Z,1478896354.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:34.644Z,1478896354.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:34.765Z,1478896354.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:35.169Z,1478896355.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:35.442Z,1478896355.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:35.565Z,1478896355.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:35.965Z,1478896355.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:36.237Z,1478896356.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:36.361Z,1478896356.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:36.648Z,1478896356.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:36.789Z,1478896356.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:37.141Z,1478896357.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:37.444Z,1478896357.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:37.542Z,1478896357.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:37.952Z,1478896357.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:38.240Z,1478896358.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:38.385Z,1478896358.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:38.754Z,1478896358.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:38.764Z,1478896358.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:39.149Z,1478896359.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:39.558Z,1478896359.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:39.560Z,1478896359.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:39.948Z,1478896359.948 [BPC1](ERROR): Failed to receive battery data
2016-11-11T20:32:39.948Z,1478896359.948 [BPC1] Communications Fault, FailCount= 1
2016-11-11T20:32:39.948Z,1478896359.948 [BPC1](ERROR): Communications Fault
2016-11-11T20:32:39.957Z,1478896359.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:39.977Z,1478896359.977 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T20:32:40.356Z,1478896360.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:40.375Z,1478896360.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:40.786Z,1478896360.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:41.096Z,1478896361.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:41.145Z,1478896361.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:41.185Z,1478896361.185 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:32:41.185Z,1478896361.185 [BPC1] No Fault, FailCount= 1
2016-11-11T20:32:41.605Z,1478896361.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:41.892Z,1478896361.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:41.979Z,1478896361.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:42.343Z,1478896362.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:42.689Z,1478896362.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:42.785Z,1478896362.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:43.116Z,1478896363.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:43.159Z,1478896363.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:43.541Z,1478896363.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:43.914Z,1478896363.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:43.945Z,1478896363.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:44.347Z,1478896364.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:44.616Z,1478896364.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:44.755Z,1478896364.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:45.147Z,1478896365.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:45.412Z,1478896365.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:45.550Z,1478896365.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:45.957Z,1478896365.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:46.209Z,1478896366.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:46.357Z,1478896366.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:46.620Z,1478896366.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:46.747Z,1478896366.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:47.149Z,1478896367.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:47.416Z,1478896367.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:47.549Z,1478896367.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:47.955Z,1478896367.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:48.213Z,1478896368.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:48.357Z,1478896368.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:48.624Z,1478896368.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:48.753Z,1478896368.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:49.153Z,1478896369.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:49.420Z,1478896369.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:49.541Z,1478896369.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:49.967Z,1478896369.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:50.217Z,1478896370.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:50.370Z,1478896370.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:50.632Z,1478896370.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:50.771Z,1478896370.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:51.155Z,1478896371.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:51.428Z,1478896371.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:51.544Z,1478896371.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:51.945Z,1478896371.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:52.227Z,1478896372.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:52.380Z,1478896372.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:52.712Z,1478896372.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:52.787Z,1478896372.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:53.153Z,1478896373.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:53.508Z,1478896373.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:53.558Z,1478896373.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:53.957Z,1478896373.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:54.304Z,1478896374.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:54.362Z,1478896374.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:54.757Z,1478896374.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:55.064Z,1478896375.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:55.201Z,1478896375.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:55.585Z,1478896375.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:55.860Z,1478896375.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:55.969Z,1478896375.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:56.361Z,1478896376.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:56.656Z,1478896376.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:56.754Z,1478896376.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:57.068Z,1478896377.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:57.150Z,1478896377.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:57.544Z,1478896377.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:57.864Z,1478896377.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:57.989Z,1478896377.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:58.350Z,1478896378.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:58.592Z,1478896378.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:58.760Z,1478896378.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:59.146Z,1478896379.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:59.388Z,1478896379.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:32:59.549Z,1478896379.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:32:59.955Z,1478896379.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:00.185Z,1478896380.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:00.361Z,1478896380.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:00.597Z,1478896380.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:00.765Z,1478896380.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:01.159Z,1478896381.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:01.392Z,1478896381.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:01.565Z,1478896381.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:01.953Z,1478896381.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:02.189Z,1478896382.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:02.356Z,1478896382.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:02.612Z,1478896382.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:02.749Z,1478896382.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:03.156Z,1478896383.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:03.408Z,1478896383.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:03.555Z,1478896383.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:03.957Z,1478896383.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:04.205Z,1478896384.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:04.354Z,1478896384.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:04.616Z,1478896384.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:04.762Z,1478896384.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:05.157Z,1478896385.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:05.412Z,1478896385.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:05.570Z,1478896385.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:05.986Z,1478896385.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:06.208Z,1478896386.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:06.384Z,1478896386.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:06.728Z,1478896386.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:06.764Z,1478896386.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:07.166Z,1478896387.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:07.524Z,1478896387.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:07.569Z,1478896387.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:07.965Z,1478896387.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:08.320Z,1478896388.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:08.375Z,1478896388.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:08.749Z,1478896388.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:09.044Z,1478896389.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:09.179Z,1478896389.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:09.584Z,1478896389.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:09.840Z,1478896389.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:09.944Z,1478896389.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:10.342Z,1478896390.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:10.637Z,1478896390.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:10.754Z,1478896390.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:11.048Z,1478896391.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:11.161Z,1478896391.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:11.556Z,1478896391.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:11.844Z,1478896391.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:11.958Z,1478896391.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:12.349Z,1478896392.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:12.568Z,1478896392.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:12.757Z,1478896392.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:13.165Z,1478896393.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:13.364Z,1478896393.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:13.552Z,1478896393.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:13.953Z,1478896393.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:14.161Z,1478896394.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:14.354Z,1478896394.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:14.572Z,1478896394.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:14.752Z,1478896394.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:15.155Z,1478896395.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:15.368Z,1478896395.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:15.553Z,1478896395.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:15.969Z,1478896395.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:16.165Z,1478896396.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:16.362Z,1478896396.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:16.576Z,1478896396.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:16.761Z,1478896396.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:17.164Z,1478896397.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:17.372Z,1478896397.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:17.555Z,1478896397.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:17.953Z,1478896397.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:18.169Z,1478896398.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:18.360Z,1478896398.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:18.580Z,1478896398.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:18.761Z,1478896398.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:19.141Z,1478896399.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:19.376Z,1478896399.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:20.172Z,1478896400.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:20.668Z,1478896400.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:21.464Z,1478896401.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:22.260Z,1478896402.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:22.611Z,1478896402.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:22.780Z,1478896402.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:23.036Z,1478896403.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:23.190Z,1478896403.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:23.554Z,1478896403.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:23.834Z,1478896403.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:23.969Z,1478896403.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:24.362Z,1478896404.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:24.629Z,1478896404.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:24.760Z,1478896404.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:25.040Z,1478896405.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:25.140Z,1478896405.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:25.578Z,1478896405.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:25.836Z,1478896405.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:25.941Z,1478896405.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:26.365Z,1478896406.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:26.548Z,1478896406.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:26.740Z,1478896406.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:27.142Z,1478896407.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:27.344Z,1478896407.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:27.553Z,1478896407.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:27.949Z,1478896407.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:28.141Z,1478896408.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:28.355Z,1478896408.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:28.552Z,1478896408.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:28.760Z,1478896408.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:29.149Z,1478896409.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:29.348Z,1478896409.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:29.553Z,1478896409.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:29.948Z,1478896409.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:30.145Z,1478896410.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:30.352Z,1478896410.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:30.556Z,1478896410.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:30.745Z,1478896410.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:31.152Z,1478896411.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:31.352Z,1478896411.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:31.553Z,1478896411.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:31.957Z,1478896411.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:32.149Z,1478896412.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:32.365Z,1478896412.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:32.560Z,1478896412.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:32.768Z,1478896412.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:33.157Z,1478896413.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:33.356Z,1478896413.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:33.557Z,1478896413.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:33.959Z,1478896413.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:34.152Z,1478896414.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:34.361Z,1478896414.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:34.656Z,1478896414.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:34.745Z,1478896414.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:35.179Z,1478896415.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:35.452Z,1478896415.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:35.542Z,1478896415.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:35.993Z,1478896415.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:36.248Z,1478896416.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:36.345Z,1478896416.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:36.773Z,1478896416.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:37.004Z,1478896417.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:37.148Z,1478896417.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:37.558Z,1478896417.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:37.800Z,1478896417.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:38.000Z,1478896418.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:38.355Z,1478896418.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:38.604Z,1478896418.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:38.766Z,1478896418.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:39.024Z,1478896419.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:39.167Z,1478896419.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:39.545Z,1478896419.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:39.820Z,1478896419.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:39.940Z,1478896419.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:40.341Z,1478896420.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:40.528Z,1478896420.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:40.743Z,1478896420.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:41.141Z,1478896421.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:41.324Z,1478896421.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:41.553Z,1478896421.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:41.945Z,1478896421.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:42.122Z,1478896422.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:42.349Z,1478896422.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:42.540Z,1478896422.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:42.743Z,1478896422.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:43.155Z,1478896423.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:43.336Z,1478896423.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:43.555Z,1478896423.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:43.969Z,1478896423.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:44.133Z,1478896424.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:44.352Z,1478896424.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:44.544Z,1478896424.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:44.753Z,1478896424.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:45.145Z,1478896425.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:45.340Z,1478896425.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:45.561Z,1478896425.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:45.933Z,1478896425.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:46.137Z,1478896426.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:46.361Z,1478896426.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:46.552Z,1478896426.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:46.761Z,1478896426.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:47.141Z,1478896427.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:47.348Z,1478896427.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:47.544Z,1478896427.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:47.938Z,1478896427.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:48.144Z,1478896428.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:48.355Z,1478896428.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:48.632Z,1478896428.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:48.785Z,1478896428.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:49.157Z,1478896429.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:49.428Z,1478896429.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:49.561Z,1478896429.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:49.969Z,1478896429.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:50.224Z,1478896430.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:50.349Z,1478896430.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:50.749Z,1478896430.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:50.976Z,1478896430.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:51.165Z,1478896431.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:51.551Z,1478896431.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:51.772Z,1478896431.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:51.969Z,1478896431.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:52.369Z,1478896432.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:52.569Z,1478896432.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:52.760Z,1478896432.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:52.980Z,1478896432.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:53.133Z,1478896433.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:53.563Z,1478896433.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:53.776Z,1478896433.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:53.968Z,1478896433.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:54.346Z,1478896434.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:54.504Z,1478896434.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:54.749Z,1478896434.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:55.145Z,1478896435.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:55.300Z,1478896435.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:55.540Z,1478896435.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:55.947Z,1478896435.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:56.097Z,1478896436.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:56.347Z,1478896436.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:56.508Z,1478896436.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:56.745Z,1478896436.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:57.141Z,1478896437.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:57.304Z,1478896437.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:57.554Z,1478896437.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:57.943Z,1478896437.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:58.101Z,1478896438.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:58.340Z,1478896438.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:58.512Z,1478896438.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:58.753Z,1478896438.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:59.157Z,1478896439.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:59.308Z,1478896439.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:33:59.558Z,1478896439.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:33:59.952Z,1478896439.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:00.105Z,1478896440.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:00.357Z,1478896440.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:00.516Z,1478896440.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:00.737Z,1478896440.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:01.137Z,1478896441.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:01.312Z,1478896441.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:01.570Z,1478896441.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:01.945Z,1478896441.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:02.111Z,1478896442.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:02.349Z,1478896442.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:02.596Z,1478896442.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:02.746Z,1478896442.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:03.150Z,1478896443.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:03.392Z,1478896443.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:03.601Z,1478896443.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:03.959Z,1478896443.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:04.188Z,1478896444.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:04.361Z,1478896444.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:04.801Z,1478896444.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:04.960Z,1478896444.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:05.163Z,1478896445.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:05.552Z,1478896445.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:05.756Z,1478896445.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:05.969Z,1478896445.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:06.357Z,1478896446.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:06.553Z,1478896446.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:06.769Z,1478896446.769 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:06.769Z,1478896446.769 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 294
2016-11-11T20:34:06.770Z,1478896446.770 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:34:06.776Z,1478896446.776 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:06.777Z,1478896446.777 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 294
2016-11-11T20:34:06.777Z,1478896446.777 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:34:06.779Z,1478896446.779 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:06.779Z,1478896446.779 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 294
2016-11-11T20:34:06.779Z,1478896446.779 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:34:06.793Z,1478896446.793 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:34:06.794Z,1478896446.794 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:34:06.794Z,1478896446.794 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:34:06.964Z,1478896446.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:07.182Z,1478896447.182 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:34:07.182Z,1478896447.182 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 294
2016-11-11T20:34:07.183Z,1478896447.183 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:34:07.183Z,1478896447.183 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 294
2016-11-11T20:34:07.184Z,1478896447.184 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:34:07.184Z,1478896447.184 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 294
2016-11-11T20:34:07.548Z,1478896447.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:34:07.548Z,1478896447.548 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:34:07.549Z,1478896447.549 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:34:07.553Z,1478896447.553 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:34:07.554Z,1478896447.554 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:34:07.554Z,1478896447.554 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:34:07.555Z,1478896447.555 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:34:07.555Z,1478896447.555 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:34:07.556Z,1478896447.556 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:34:07.760Z,1478896447.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:07.939Z,1478896447.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:08.338Z,1478896448.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:08.484Z,1478896448.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:08.744Z,1478896448.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:09.157Z,1478896449.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:09.280Z,1478896449.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:09.549Z,1478896449.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:09.949Z,1478896449.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:10.077Z,1478896450.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:10.341Z,1478896450.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:10.488Z,1478896450.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:10.748Z,1478896450.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:11.145Z,1478896451.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:11.284Z,1478896451.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:11.548Z,1478896451.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:11.951Z,1478896451.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:12.081Z,1478896452.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:12.352Z,1478896452.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:12.492Z,1478896452.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:12.748Z,1478896452.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:13.153Z,1478896453.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:13.288Z,1478896453.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:13.558Z,1478896453.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:13.965Z,1478896453.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:14.087Z,1478896454.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:14.358Z,1478896454.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:14.504Z,1478896454.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:14.754Z,1478896454.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:15.157Z,1478896455.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:15.300Z,1478896455.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:15.532Z,1478896455.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:15.941Z,1478896455.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:16.097Z,1478896456.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:16.341Z,1478896456.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:16.580Z,1478896456.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:16.741Z,1478896456.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:17.144Z,1478896457.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:17.376Z,1478896457.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:17.553Z,1478896457.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:17.599Z,1478896457.599 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T20:29:17.2Z
2016-11-11T20:34:17.599Z,1478896457.599 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T20:34:17.599Z,1478896457.599 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T20:34:17.957Z,1478896457.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:18.172Z,1478896458.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:18.940Z,1478896458.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:18.942Z,1478896458.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:19.053Z,1478896459.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:19.736Z,1478896459.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:20.533Z,1478896460.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:20.948Z,1478896460.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:21.744Z,1478896461.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:22.472Z,1478896462.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:22.573Z,1478896462.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:22.664Z,1478896462.664 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0364.lzma
2016-11-11T20:34:22.749Z,1478896462.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:23.105Z,1478896463.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:23.268Z,1478896463.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:23.450Z,1478896463.450 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0364.lzma.bak
2016-11-11T20:34:23.450Z,1478896463.450 [DataOverHttps](INFO): SBD MOMSN=4555736
2016-11-11T20:34:23.534Z,1478896463.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:24.067Z,1478896464.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:24.480Z,1478896464.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:24.886Z,1478896464.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:25.017Z,1478896465.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:25.276Z,1478896465.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:26.073Z,1478896466.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:26.484Z,1478896466.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:27.280Z,1478896467.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:28.076Z,1478896468.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:28.436Z,1478896468.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:28.488Z,1478896468.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:28.604Z,1478896468.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:28.916Z,1478896468.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:29.285Z,1478896469.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:29.321Z,1478896469.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:29.715Z,1478896469.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:30.081Z,1478896470.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:30.162Z,1478896470.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:30.544Z,1478896470.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:31.340Z,1478896471.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:32.136Z,1478896472.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:32.912Z,1478896472.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:33.415Z,1478896473.415 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T20:34:33.460Z,1478896473.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:33.538Z,1478896473.537 [DataOverHttps](INFO): Sending 254 bytes from file Logs/20161111T044527/Express0365.lzma
2016-11-11T20:34:33.601Z,1478896473.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:33.708Z,1478896473.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:33.966Z,1478896473.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:34.504Z,1478896474.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:35.300Z,1478896475.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:36.096Z,1478896476.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:36.892Z,1478896476.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:37.690Z,1478896477.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:38.484Z,1478896478.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:39.280Z,1478896479.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:40.076Z,1478896480.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:40.872Z,1478896480.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:41.668Z,1478896481.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:42.464Z,1478896482.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:43.260Z,1478896483.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:44.056Z,1478896484.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:44.852Z,1478896484.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:45.648Z,1478896485.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:46.444Z,1478896486.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:47.241Z,1478896487.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:48.036Z,1478896488.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:48.832Z,1478896488.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:49.628Z,1478896489.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:50.424Z,1478896490.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:51.220Z,1478896491.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:52.016Z,1478896492.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:52.812Z,1478896492.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:53.608Z,1478896493.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:54.299Z,1478896494.299 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0365.lzma.bak
2016-11-11T20:34:54.299Z,1478896494.299 [DataOverHttps](INFO): SBD MOMSN=4555738
2016-11-11T20:34:54.312Z,1478896494.312 [NAL9602](INFO): Powering down
2016-11-11T20:34:54.397Z,1478896494.397 [BPC1](ERROR): Failed to receive battery data
2016-11-11T20:34:54.397Z,1478896494.397 [BPC1] Communications Fault, FailCount= 1
2016-11-11T20:34:54.398Z,1478896494.398 [BPC1](ERROR): Communications Fault
2016-11-11T20:34:54.404Z,1478896494.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:54.469Z,1478896494.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:54.545Z,1478896494.545 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T20:34:54.812Z,1478896494.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:55.224Z,1478896495.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:55.632Z,1478896495.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:56.029Z,1478896496.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:56.048Z,1478896496.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:56.071Z,1478896496.071 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T20:34:56.079Z,1478896496.079 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T20:34:56.079Z,1478896496.079 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T20:34:56.164Z,1478896496.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:56.458Z,1478896496.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:56.868Z,1478896496.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:57.276Z,1478896497.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:57.684Z,1478896497.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:58.093Z,1478896498.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:58.504Z,1478896498.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:58.912Z,1478896498.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:59.320Z,1478896499.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:59.607Z,1478896499.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:34:59.659Z,1478896499.659 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:34:59.659Z,1478896499.659 [BPC1] No Fault, FailCount= 1
2016-11-11T20:34:59.728Z,1478896499.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:34:59.793Z,1478896499.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:00.136Z,1478896500.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:00.515Z,1478896500.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:00.540Z,1478896500.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:00.920Z,1478896500.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:00.948Z,1478896500.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:01.314Z,1478896501.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:01.715Z,1478896501.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:01.744Z,1478896501.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:02.115Z,1478896502.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:02.519Z,1478896502.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:02.548Z,1478896502.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:02.921Z,1478896502.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:02.956Z,1478896502.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:03.329Z,1478896503.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:03.713Z,1478896503.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:03.752Z,1478896503.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:04.113Z,1478896504.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:04.368Z,1478896504.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:04.512Z,1478896504.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:04.917Z,1478896504.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:05.164Z,1478896505.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:05.330Z,1478896505.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:05.719Z,1478896505.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:05.961Z,1478896505.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:06.117Z,1478896506.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:06.380Z,1478896506.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:06.522Z,1478896506.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:06.914Z,1478896506.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:07.176Z,1478896507.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:07.320Z,1478896507.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:07.722Z,1478896507.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:07.973Z,1478896507.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:08.112Z,1478896508.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:08.384Z,1478896508.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:08.519Z,1478896508.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:08.921Z,1478896508.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:09.180Z,1478896509.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:09.318Z,1478896509.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:09.721Z,1478896509.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:09.980Z,1478896509.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:10.121Z,1478896510.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:10.412Z,1478896510.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:10.518Z,1478896510.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:10.938Z,1478896510.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:11.208Z,1478896511.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:11.324Z,1478896511.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:11.724Z,1478896511.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:12.005Z,1478896512.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:12.149Z,1478896512.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:12.520Z,1478896512.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:12.533Z,1478896512.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:12.945Z,1478896512.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:13.316Z,1478896513.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:13.348Z,1478896513.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:13.713Z,1478896513.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:14.112Z,1478896514.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:14.118Z,1478896514.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:14.511Z,1478896514.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:14.824Z,1478896514.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:14.925Z,1478896514.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:15.319Z,1478896515.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:15.620Z,1478896515.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:15.717Z,1478896515.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:16.113Z,1478896516.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:16.417Z,1478896516.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:16.523Z,1478896516.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:16.828Z,1478896516.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:16.920Z,1478896516.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:17.321Z,1478896517.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:17.624Z,1478896517.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:17.721Z,1478896517.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:18.113Z,1478896518.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:18.356Z,1478896518.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:18.527Z,1478896518.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:18.917Z,1478896518.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:19.152Z,1478896519.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:19.318Z,1478896519.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:19.721Z,1478896519.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:19.955Z,1478896519.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:20.121Z,1478896520.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:20.380Z,1478896520.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:20.526Z,1478896520.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:20.929Z,1478896520.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:21.176Z,1478896521.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:21.324Z,1478896521.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:21.723Z,1478896521.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:21.972Z,1478896521.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:22.129Z,1478896522.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:22.380Z,1478896522.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:22.517Z,1478896522.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:22.914Z,1478896522.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:23.176Z,1478896523.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:23.317Z,1478896523.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:23.737Z,1478896523.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:23.972Z,1478896523.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:24.119Z,1478896524.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:24.380Z,1478896524.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:24.513Z,1478896524.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:24.914Z,1478896524.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:25.176Z,1478896525.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:25.317Z,1478896525.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:25.769Z,1478896525.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:25.972Z,1478896525.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:26.138Z,1478896526.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:26.440Z,1478896526.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:26.545Z,1478896526.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:26.917Z,1478896526.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:27.236Z,1478896527.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:27.357Z,1478896527.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:27.753Z,1478896527.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:28.032Z,1478896528.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:28.115Z,1478896528.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:28.512Z,1478896528.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:28.800Z,1478896528.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:28.954Z,1478896528.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:29.321Z,1478896529.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:29.596Z,1478896529.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:29.720Z,1478896529.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:30.120Z,1478896530.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:30.393Z,1478896530.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:30.527Z,1478896530.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:30.804Z,1478896530.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:30.924Z,1478896530.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:31.321Z,1478896531.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:31.600Z,1478896531.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:31.703Z,1478896531.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:32.109Z,1478896532.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:32.328Z,1478896532.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:32.542Z,1478896532.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:32.913Z,1478896532.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:33.124Z,1478896533.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:33.309Z,1478896533.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:33.717Z,1478896533.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:33.921Z,1478896533.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:34.116Z,1478896534.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:34.340Z,1478896534.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:34.511Z,1478896534.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:34.914Z,1478896534.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:35.136Z,1478896535.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:35.317Z,1478896535.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:35.711Z,1478896535.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:35.933Z,1478896535.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:36.128Z,1478896536.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:36.348Z,1478896536.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:36.521Z,1478896536.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:36.928Z,1478896536.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:37.144Z,1478896537.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:37.321Z,1478896537.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:37.736Z,1478896537.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:37.942Z,1478896537.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:38.137Z,1478896538.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:38.356Z,1478896538.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:38.509Z,1478896538.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:38.917Z,1478896538.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:39.153Z,1478896539.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:39.310Z,1478896539.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:39.749Z,1478896539.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:39.948Z,1478896539.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:40.116Z,1478896540.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:40.448Z,1478896540.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:40.519Z,1478896540.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:40.956Z,1478896540.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:41.244Z,1478896541.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:41.313Z,1478896541.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:41.749Z,1478896541.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:42.041Z,1478896542.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:42.251Z,1478896542.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:42.503Z,1478896542.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:42.800Z,1478896542.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:42.913Z,1478896542.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:43.312Z,1478896543.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:43.596Z,1478896543.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:43.712Z,1478896543.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:44.110Z,1478896544.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:44.393Z,1478896544.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:44.516Z,1478896544.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:44.804Z,1478896544.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:44.912Z,1478896544.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:45.312Z,1478896545.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:45.600Z,1478896545.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:45.832Z,1478896545.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:46.110Z,1478896546.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:46.308Z,1478896546.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:46.515Z,1478896546.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:46.915Z,1478896546.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:47.104Z,1478896547.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:47.317Z,1478896547.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:47.715Z,1478896547.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:47.901Z,1478896547.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:48.119Z,1478896548.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:48.312Z,1478896548.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:48.539Z,1478896548.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:48.908Z,1478896548.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:49.108Z,1478896549.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:49.308Z,1478896549.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:49.709Z,1478896549.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:49.905Z,1478896549.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:50.115Z,1478896550.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:50.316Z,1478896550.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:50.517Z,1478896550.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:50.917Z,1478896550.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:51.112Z,1478896551.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:51.311Z,1478896551.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:51.712Z,1478896551.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:51.919Z,1478896551.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:52.120Z,1478896552.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:52.336Z,1478896552.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:52.514Z,1478896552.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:52.922Z,1478896552.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:53.132Z,1478896553.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:53.351Z,1478896553.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:53.723Z,1478896553.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:53.928Z,1478896553.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:54.169Z,1478896554.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:54.400Z,1478896554.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:54.509Z,1478896554.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:54.950Z,1478896554.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:55.196Z,1478896555.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:55.317Z,1478896555.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:55.750Z,1478896555.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:55.993Z,1478896555.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:56.141Z,1478896556.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:56.520Z,1478896556.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:35:56.752Z,1478896556.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:57.548Z,1478896557.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:58.345Z,1478896558.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:58.772Z,1478896558.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:35:59.568Z,1478896559.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:00.084Z,1478896560.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:00.215Z,1478896560.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:00.288Z,1478896560.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:00.590Z,1478896560.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:00.988Z,1478896560.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:01.084Z,1478896561.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:01.401Z,1478896561.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:01.799Z,1478896561.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:01.881Z,1478896561.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:02.188Z,1478896562.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:02.292Z,1478896562.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:02.589Z,1478896562.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:02.999Z,1478896562.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:03.088Z,1478896563.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:03.393Z,1478896563.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:03.790Z,1478896563.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:03.885Z,1478896563.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:04.200Z,1478896564.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:04.296Z,1478896564.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:04.605Z,1478896564.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:05.002Z,1478896565.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:05.092Z,1478896565.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:05.402Z,1478896565.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:05.806Z,1478896565.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:05.888Z,1478896565.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:06.185Z,1478896566.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:06.300Z,1478896566.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:06.629Z,1478896566.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:06.990Z,1478896566.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:07.096Z,1478896567.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:07.386Z,1478896567.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:07.841Z,1478896567.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:07.892Z,1478896567.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:08.203Z,1478896568.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:08.372Z,1478896568.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:08.590Z,1478896568.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:09.033Z,1478896569.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:09.168Z,1478896569.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:09.389Z,1478896569.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:09.833Z,1478896569.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:09.964Z,1478896569.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:10.245Z,1478896570.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:10.583Z,1478896570.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:10.752Z,1478896570.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:10.988Z,1478896570.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:11.392Z,1478896571.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:11.548Z,1478896571.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:11.793Z,1478896571.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:12.190Z,1478896572.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:12.345Z,1478896572.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:12.598Z,1478896572.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:12.756Z,1478896572.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:12.993Z,1478896572.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:13.389Z,1478896573.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:13.552Z,1478896573.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:13.792Z,1478896573.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:13.853Z,1478896573.853 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T20:36:14.179Z,1478896574.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:14.292Z,1478896574.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:14.580Z,1478896574.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:15.006Z,1478896575.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:15.088Z,1478896575.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:15.389Z,1478896575.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:15.787Z,1478896575.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:15.885Z,1478896575.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:16.205Z,1478896576.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:16.296Z,1478896576.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:16.600Z,1478896576.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:16.985Z,1478896576.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:17.093Z,1478896577.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:17.387Z,1478896577.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:17.785Z,1478896577.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:17.888Z,1478896577.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:18.190Z,1478896578.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:18.296Z,1478896578.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:18.600Z,1478896578.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:18.993Z,1478896578.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:19.092Z,1478896579.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:19.389Z,1478896579.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:19.789Z,1478896579.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:19.888Z,1478896579.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:20.209Z,1478896580.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:20.296Z,1478896580.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:20.601Z,1478896580.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:21.033Z,1478896581.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:21.092Z,1478896581.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:21.393Z,1478896581.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:21.787Z,1478896581.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:21.888Z,1478896581.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:22.194Z,1478896582.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:22.368Z,1478896582.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:22.606Z,1478896582.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:22.990Z,1478896582.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:23.164Z,1478896583.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:23.418Z,1478896583.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:23.800Z,1478896583.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:23.960Z,1478896583.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:24.240Z,1478896584.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:24.622Z,1478896584.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:24.716Z,1478896584.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:25.002Z,1478896585.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:25.405Z,1478896585.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:25.512Z,1478896585.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:25.780Z,1478896585.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:26.193Z,1478896586.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:26.309Z,1478896586.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:26.587Z,1478896586.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:26.724Z,1478896586.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:26.993Z,1478896586.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:27.393Z,1478896587.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:27.521Z,1478896587.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:27.790Z,1478896587.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:28.194Z,1478896588.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:28.244Z,1478896588.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:28.608Z,1478896588.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:28.998Z,1478896588.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:29.040Z,1478896589.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:29.400Z,1478896589.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:29.836Z,1478896589.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:29.862Z,1478896589.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:30.187Z,1478896590.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:30.248Z,1478896590.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:30.592Z,1478896590.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:30.998Z,1478896590.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:31.044Z,1478896591.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:31.392Z,1478896591.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:31.823Z,1478896591.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:31.840Z,1478896591.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:32.245Z,1478896592.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:32.280Z,1478896592.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:32.586Z,1478896592.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:32.985Z,1478896592.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:33.076Z,1478896593.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:33.393Z,1478896593.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:33.810Z,1478896593.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:33.872Z,1478896593.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:34.201Z,1478896594.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:34.280Z,1478896594.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:34.603Z,1478896594.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:34.990Z,1478896594.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:35.076Z,1478896595.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:35.425Z,1478896595.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:35.805Z,1478896595.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:35.872Z,1478896595.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:36.189Z,1478896596.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:36.336Z,1478896596.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:36.592Z,1478896596.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:37.010Z,1478896597.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:37.132Z,1478896597.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:37.390Z,1478896597.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:37.793Z,1478896597.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:37.928Z,1478896597.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:38.214Z,1478896598.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:38.588Z,1478896598.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:38.692Z,1478896598.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:39.025Z,1478896599.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:39.387Z,1478896599.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:39.488Z,1478896599.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:39.830Z,1478896599.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:40.197Z,1478896600.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:40.285Z,1478896600.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:40.602Z,1478896600.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:40.700Z,1478896600.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:41.002Z,1478896601.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:41.398Z,1478896601.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:41.496Z,1478896601.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:41.867Z,1478896601.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:42.184Z,1478896602.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:42.240Z,1478896602.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:42.592Z,1478896602.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:43.003Z,1478896603.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:43.036Z,1478896603.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:43.436Z,1478896603.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:43.833Z,1478896603.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:43.883Z,1478896603.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:44.209Z,1478896604.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:44.264Z,1478896604.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:44.601Z,1478896604.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:45.012Z,1478896605.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:45.060Z,1478896605.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:45.401Z,1478896605.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:45.857Z,1478896605.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:45.896Z,1478896605.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:46.205Z,1478896606.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:46.284Z,1478896606.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:46.628Z,1478896606.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:46.986Z,1478896606.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:47.080Z,1478896607.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:47.427Z,1478896607.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:47.876Z,1478896607.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:47.894Z,1478896607.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:48.209Z,1478896608.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:48.284Z,1478896608.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:48.616Z,1478896608.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:49.019Z,1478896609.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:49.080Z,1478896609.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:49.402Z,1478896609.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:49.828Z,1478896609.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:49.877Z,1478896609.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:50.201Z,1478896610.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:50.312Z,1478896610.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:50.652Z,1478896610.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:51.022Z,1478896611.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:51.108Z,1478896611.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:51.406Z,1478896611.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:51.787Z,1478896611.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:51.904Z,1478896611.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:52.201Z,1478896612.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:52.632Z,1478896612.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:52.668Z,1478896612.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:53.005Z,1478896613.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:53.428Z,1478896613.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:53.464Z,1478896613.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:53.842Z,1478896613.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:54.202Z,1478896614.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:54.261Z,1478896614.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:54.613Z,1478896614.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:54.684Z,1478896614.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:55.009Z,1478896615.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:55.393Z,1478896615.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:55.480Z,1478896615.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:55.867Z,1478896615.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:56.189Z,1478896616.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:56.252Z,1478896616.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:56.592Z,1478896616.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:36:57.048Z,1478896617.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:57.844Z,1478896617.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:58.252Z,1478896618.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:59.048Z,1478896619.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:36:59.845Z,1478896619.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:00.252Z,1478896620.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:01.048Z,1478896621.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:01.844Z,1478896621.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:02.252Z,1478896622.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:03.048Z,1478896623.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:03.844Z,1478896623.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:04.281Z,1478896624.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:04.292Z,1478896624.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:04.482Z,1478896624.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:04.849Z,1478896624.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:05.088Z,1478896625.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:05.241Z,1478896625.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:05.657Z,1478896625.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:05.884Z,1478896625.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:06.083Z,1478896626.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:06.424Z,1478896626.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:06.664Z,1478896626.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:06.841Z,1478896626.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:07.239Z,1478896627.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:07.460Z,1478896627.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:07.655Z,1478896627.655 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:07.655Z,1478896627.655 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 295
2016-11-11T20:37:07.687Z,1478896627.687 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:37:07.693Z,1478896627.693 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:07.694Z,1478896627.694 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 295
2016-11-11T20:37:07.694Z,1478896627.694 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:37:07.696Z,1478896627.696 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:07.696Z,1478896627.696 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 295
2016-11-11T20:37:07.696Z,1478896627.696 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:37:07.760Z,1478896627.760 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:37:07.760Z,1478896627.760 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:37:07.760Z,1478896627.760 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:37:08.078Z,1478896628.078 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:37:08.078Z,1478896628.078 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 295
2016-11-11T20:37:08.078Z,1478896628.078 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:37:08.078Z,1478896628.078 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 295
2016-11-11T20:37:08.087Z,1478896628.087 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:37:08.087Z,1478896628.088 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 295
2016-11-11T20:37:08.257Z,1478896628.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:08.436Z,1478896628.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:37:08.436Z,1478896628.436 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:37:08.437Z,1478896628.437 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:37:08.470Z,1478896628.470 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:37:08.470Z,1478896628.470 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:37:08.470Z,1478896628.470 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:37:08.471Z,1478896628.471 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:37:08.471Z,1478896628.471 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:37:08.472Z,1478896628.472 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:37:08.668Z,1478896628.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:08.841Z,1478896628.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:09.220Z,1478896629.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:09.464Z,1478896629.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:09.632Z,1478896629.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:10.049Z,1478896630.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:10.260Z,1478896630.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:10.434Z,1478896630.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:10.835Z,1478896630.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:11.056Z,1478896631.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:11.262Z,1478896631.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:11.622Z,1478896631.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:11.852Z,1478896631.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:12.002Z,1478896632.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:12.449Z,1478896632.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:12.648Z,1478896632.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:12.818Z,1478896632.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:13.229Z,1478896633.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:13.444Z,1478896633.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:13.643Z,1478896633.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:14.098Z,1478896634.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:14.240Z,1478896634.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:14.415Z,1478896634.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:14.815Z,1478896634.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:15.036Z,1478896635.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:15.218Z,1478896635.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:15.644Z,1478896635.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:15.832Z,1478896635.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:16.025Z,1478896636.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:16.422Z,1478896636.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:16.628Z,1478896636.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:16.811Z,1478896636.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:17.237Z,1478896637.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:17.424Z,1478896637.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:17.622Z,1478896637.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:18.077Z,1478896638.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:18.220Z,1478896638.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:18.435Z,1478896638.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:18.804Z,1478896638.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:19.018Z,1478896639.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:19.289Z,1478896639.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:19.609Z,1478896639.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:19.812Z,1478896639.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:20.008Z,1478896640.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:20.450Z,1478896640.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:20.608Z,1478896640.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:20.813Z,1478896640.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:21.245Z,1478896641.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:21.404Z,1478896641.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:21.611Z,1478896641.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:22.034Z,1478896642.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:22.204Z,1478896642.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:22.433Z,1478896642.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:22.820Z,1478896642.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:22.000Z,1478896643.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:23.225Z,1478896643.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:23.600Z,1478896643.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:23.796Z,1478896643.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:24.005Z,1478896644.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:24.439Z,1478896644.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:24.592Z,1478896644.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:24.803Z,1478896644.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:25.208Z,1478896645.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:25.388Z,1478896645.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:25.637Z,1478896645.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:25.796Z,1478896645.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:26.016Z,1478896646.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:26.204Z,1478896646.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:26.428Z,1478896646.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:26.612Z,1478896646.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:26.821Z,1478896646.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:27.020Z,1478896647.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:27.216Z,1478896647.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:27.428Z,1478896647.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:27.621Z,1478896647.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:27.836Z,1478896647.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:28.027Z,1478896648.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:28.244Z,1478896648.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:28.424Z,1478896648.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:28.653Z,1478896648.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:28.821Z,1478896648.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:29.064Z,1478896649.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:29.205Z,1478896649.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:29.472Z,1478896649.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:29.605Z,1478896649.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:30.010Z,1478896650.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:30.140Z,1478896650.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:30.409Z,1478896650.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:30.804Z,1478896650.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:30.936Z,1478896650.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:31.217Z,1478896651.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:31.613Z,1478896651.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:31.732Z,1478896651.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:32.007Z,1478896652.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:32.268Z,1478896652.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:32.412Z,1478896652.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:32.808Z,1478896652.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:33.064Z,1478896653.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:33.210Z,1478896653.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:33.610Z,1478896653.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:33.860Z,1478896653.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:34.017Z,1478896654.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:34.457Z,1478896654.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:34.616Z,1478896654.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:34.813Z,1478896654.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:35.218Z,1478896655.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:35.412Z,1478896655.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:35.654Z,1478896655.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:36.012Z,1478896656.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:36.209Z,1478896656.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:36.454Z,1478896656.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:36.620Z,1478896656.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:36.841Z,1478896656.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:37.223Z,1478896657.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:37.416Z,1478896657.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:37.621Z,1478896657.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:38.005Z,1478896658.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:38.128Z,1478896658.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:38.404Z,1478896658.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:38.813Z,1478896658.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:38.924Z,1478896658.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:39.210Z,1478896659.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:39.609Z,1478896659.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:39.721Z,1478896659.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:40.013Z,1478896660.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:40.132Z,1478896660.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:40.407Z,1478896660.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:40.808Z,1478896660.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:40.928Z,1478896660.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:41.217Z,1478896661.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:41.611Z,1478896661.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:41.725Z,1478896661.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:42.028Z,1478896662.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:42.136Z,1478896662.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:42.427Z,1478896662.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:42.800Z,1478896662.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:42.932Z,1478896662.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:43.207Z,1478896663.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:43.607Z,1478896663.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:43.729Z,1478896663.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:44.010Z,1478896664.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:44.140Z,1478896664.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:44.409Z,1478896664.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:44.812Z,1478896664.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:44.936Z,1478896664.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:45.216Z,1478896665.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:45.625Z,1478896665.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:45.732Z,1478896665.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:46.012Z,1478896666.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:46.228Z,1478896666.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:46.403Z,1478896666.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:46.813Z,1478896666.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:47.024Z,1478896667.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:47.210Z,1478896667.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:47.617Z,1478896667.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:47.820Z,1478896667.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:48.009Z,1478896668.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:48.409Z,1478896668.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:48.580Z,1478896668.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:48.833Z,1478896668.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:49.245Z,1478896669.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:49.376Z,1478896669.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:49.608Z,1478896669.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:50.008Z,1478896670.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:50.173Z,1478896670.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:50.441Z,1478896670.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:50.592Z,1478896670.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:50.816Z,1478896670.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:51.249Z,1478896671.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:51.390Z,1478896671.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:51.634Z,1478896671.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:52.020Z,1478896672.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:52.128Z,1478896672.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:52.420Z,1478896672.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:52.819Z,1478896672.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:52.924Z,1478896672.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:53.220Z,1478896673.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:53.600Z,1478896673.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:53.723Z,1478896673.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:54.029Z,1478896674.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:54.136Z,1478896674.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:54.420Z,1478896674.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:54.816Z,1478896674.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:54.934Z,1478896674.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:55.209Z,1478896675.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:55.627Z,1478896675.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:55.728Z,1478896675.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:56.007Z,1478896676.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:56.136Z,1478896676.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:56.413Z,1478896676.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:56.813Z,1478896676.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:37:56.932Z,1478896676.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:57.728Z,1478896677.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:58.141Z,1478896678.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:58.936Z,1478896678.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:37:59.732Z,1478896679.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:00.212Z,1478896680.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:00.266Z,1478896680.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:00.389Z,1478896680.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:00.764Z,1478896680.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:01.008Z,1478896681.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:01.172Z,1478896681.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:01.568Z,1478896681.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:01.804Z,1478896681.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:01.973Z,1478896681.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:02.369Z,1478896682.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:02.560Z,1478896682.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:02.766Z,1478896682.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:03.171Z,1478896683.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:03.356Z,1478896683.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:03.573Z,1478896683.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:04.009Z,1478896684.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:04.153Z,1478896684.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:04.379Z,1478896684.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:04.572Z,1478896684.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:04.789Z,1478896684.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:05.152Z,1478896685.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:05.368Z,1478896685.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:05.583Z,1478896685.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:05.983Z,1478896685.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:06.092Z,1478896686.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:06.360Z,1478896686.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:06.759Z,1478896686.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:06.888Z,1478896686.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:07.165Z,1478896687.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:07.560Z,1478896687.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:07.685Z,1478896687.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:07.967Z,1478896687.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:08.096Z,1478896688.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:08.359Z,1478896688.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:08.767Z,1478896688.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:08.892Z,1478896688.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:09.165Z,1478896689.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:09.565Z,1478896689.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:09.689Z,1478896689.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:09.973Z,1478896689.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:10.100Z,1478896690.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:10.365Z,1478896690.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:10.765Z,1478896690.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:10.896Z,1478896690.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:11.169Z,1478896691.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:11.569Z,1478896691.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:11.692Z,1478896691.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:11.973Z,1478896691.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:12.112Z,1478896692.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:12.361Z,1478896692.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:12.769Z,1478896692.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:12.908Z,1478896692.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:13.173Z,1478896693.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:13.572Z,1478896693.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:13.706Z,1478896693.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:13.970Z,1478896693.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:14.192Z,1478896694.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:14.377Z,1478896694.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:14.777Z,1478896694.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:14.988Z,1478896694.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:15.157Z,1478896695.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:15.557Z,1478896695.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:15.784Z,1478896695.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:15.961Z,1478896695.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:16.360Z,1478896696.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:16.536Z,1478896696.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:16.760Z,1478896696.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:17.152Z,1478896697.152 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T20:38:17.152Z,1478896697.152 [BPC1] Data Fault, FailCount= 1
2016-11-11T20:38:17.153Z,1478896697.152 [BPC1](ERROR): Data Fault
2016-11-11T20:38:17.162Z,1478896697.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:17.182Z,1478896697.182 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T20:38:17.332Z,1478896697.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:17.569Z,1478896697.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:17.969Z,1478896697.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:18.129Z,1478896698.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:18.368Z,1478896698.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:18.389Z,1478896698.389 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:38:18.389Z,1478896698.389 [BPC1] No Fault, FailCount= 1
2016-11-11T20:38:18.542Z,1478896698.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:18.821Z,1478896698.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:19.209Z,1478896699.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:19.336Z,1478896699.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:19.562Z,1478896699.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:19.975Z,1478896699.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:20.072Z,1478896700.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:20.380Z,1478896700.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:20.752Z,1478896700.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:20.868Z,1478896700.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:21.183Z,1478896701.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:21.557Z,1478896701.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:21.664Z,1478896701.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:21.959Z,1478896701.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:22.076Z,1478896702.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:22.369Z,1478896702.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:22.759Z,1478896702.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:22.872Z,1478896702.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:23.160Z,1478896703.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:23.565Z,1478896703.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:23.668Z,1478896703.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:23.965Z,1478896703.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:24.080Z,1478896704.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:24.362Z,1478896704.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:24.773Z,1478896704.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:24.876Z,1478896704.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:25.161Z,1478896705.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:25.568Z,1478896705.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:25.673Z,1478896705.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:25.973Z,1478896705.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:26.084Z,1478896706.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:26.357Z,1478896706.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:26.780Z,1478896706.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:26.880Z,1478896706.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:27.161Z,1478896707.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:27.559Z,1478896707.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:27.679Z,1478896707.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:27.958Z,1478896707.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:28.156Z,1478896708.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:28.365Z,1478896708.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:28.777Z,1478896708.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:28.952Z,1478896708.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:29.163Z,1478896709.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:29.573Z,1478896709.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:29.748Z,1478896709.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:29.969Z,1478896709.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:30.361Z,1478896710.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:30.516Z,1478896710.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:30.760Z,1478896710.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:31.213Z,1478896711.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:31.312Z,1478896711.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:31.560Z,1478896711.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:31.977Z,1478896711.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:32.109Z,1478896712.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:32.397Z,1478896712.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:32.520Z,1478896712.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:32.752Z,1478896712.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:33.183Z,1478896713.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:33.316Z,1478896713.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:33.590Z,1478896713.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:33.964Z,1478896713.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:34.044Z,1478896714.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:34.363Z,1478896714.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:34.763Z,1478896714.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:34.840Z,1478896714.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:35.160Z,1478896715.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:35.569Z,1478896715.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:35.637Z,1478896715.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:35.972Z,1478896715.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:36.048Z,1478896716.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:36.368Z,1478896716.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:36.778Z,1478896716.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:36.844Z,1478896716.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:37.179Z,1478896717.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:37.552Z,1478896717.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:37.640Z,1478896717.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:37.964Z,1478896717.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:38.052Z,1478896718.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:38.359Z,1478896718.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:38.759Z,1478896718.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:38.848Z,1478896718.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:39.170Z,1478896719.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:39.558Z,1478896719.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:39.645Z,1478896719.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:39.962Z,1478896719.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:40.056Z,1478896720.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:40.373Z,1478896720.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:40.762Z,1478896720.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:40.852Z,1478896720.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:41.161Z,1478896721.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:41.562Z,1478896721.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:41.648Z,1478896721.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:41.973Z,1478896721.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:42.136Z,1478896722.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:42.377Z,1478896722.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:42.757Z,1478896722.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:42.932Z,1478896722.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:43.157Z,1478896723.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:43.557Z,1478896723.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:43.728Z,1478896723.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:43.960Z,1478896723.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:44.365Z,1478896724.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:44.500Z,1478896724.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:44.759Z,1478896724.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:45.162Z,1478896725.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:45.296Z,1478896725.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:45.617Z,1478896725.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:45.960Z,1478896725.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:46.093Z,1478896726.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:46.401Z,1478896726.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:46.504Z,1478896726.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:46.768Z,1478896726.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:47.188Z,1478896727.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:47.300Z,1478896727.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:47.633Z,1478896727.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:47.956Z,1478896727.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:48.048Z,1478896728.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:48.364Z,1478896728.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:48.766Z,1478896728.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:48.844Z,1478896728.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:49.159Z,1478896729.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:49.561Z,1478896729.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:49.642Z,1478896729.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:49.968Z,1478896729.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:50.052Z,1478896730.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:50.370Z,1478896730.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:50.769Z,1478896730.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:50.848Z,1478896730.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:51.167Z,1478896731.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:51.571Z,1478896731.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:51.644Z,1478896731.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:51.969Z,1478896731.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:52.052Z,1478896732.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:52.364Z,1478896732.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:52.773Z,1478896732.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:52.848Z,1478896732.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:53.169Z,1478896733.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:53.565Z,1478896733.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:53.644Z,1478896733.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:53.961Z,1478896733.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:54.056Z,1478896734.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:54.360Z,1478896734.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:54.770Z,1478896734.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:54.852Z,1478896734.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:55.164Z,1478896735.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:55.561Z,1478896735.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:55.648Z,1478896735.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:55.966Z,1478896735.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:56.132Z,1478896736.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:56.374Z,1478896736.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:56.761Z,1478896736.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:56.928Z,1478896736.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:57.172Z,1478896737.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:38:57.724Z,1478896737.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:58.480Z,1478896738.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:38:59.276Z,1478896739.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:00.072Z,1478896740.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:00.492Z,1478896740.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:00.749Z,1478896740.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:00.902Z,1478896740.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:01.277Z,1478896741.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:01.288Z,1478896741.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:01.714Z,1478896741.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:02.040Z,1478896742.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:02.073Z,1478896742.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:02.428Z,1478896742.428 [PNI_TCM](ERROR): CRC does not match. Expected:0x16547 got:0x26710
2016-11-11T20:39:02.476Z,1478896742.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:02.836Z,1478896742.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:02.877Z,1478896742.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:03.232Z,1478896743.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:03.632Z,1478896743.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:03.678Z,1478896743.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:04.044Z,1478896744.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:04.045Z,1478896744.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:04.443Z,1478896744.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:04.840Z,1478896744.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:04.855Z,1478896744.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:05.251Z,1478896745.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:05.636Z,1478896745.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:05.674Z,1478896745.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:06.044Z,1478896746.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:06.052Z,1478896746.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:06.443Z,1478896746.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:06.833Z,1478896746.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:06.848Z,1478896746.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:07.237Z,1478896747.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:07.645Z,1478896747.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:07.683Z,1478896747.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:08.035Z,1478896748.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:08.052Z,1478896748.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:08.437Z,1478896748.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:08.845Z,1478896748.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:08.848Z,1478896748.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:09.255Z,1478896749.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:09.635Z,1478896749.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:09.652Z,1478896749.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:10.045Z,1478896750.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:10.120Z,1478896750.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:10.434Z,1478896750.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:10.838Z,1478896750.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:10.918Z,1478896750.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:11.254Z,1478896751.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:11.636Z,1478896751.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:11.712Z,1478896751.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:12.109Z,1478896752.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:12.449Z,1478896752.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:12.508Z,1478896752.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:12.835Z,1478896752.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:13.245Z,1478896753.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:13.304Z,1478896753.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:13.644Z,1478896753.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:14.088Z,1478896754.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:14.100Z,1478896754.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:14.446Z,1478896754.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:14.508Z,1478896754.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:14.818Z,1478896754.818 [PNI_TCM](ERROR): CRC does not match. Expected:0x27011 got:0x49152
2016-11-11T20:39:14.921Z,1478896754.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:15.227Z,1478896755.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:15.304Z,1478896755.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:15.709Z,1478896755.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:15.980Z,1478896755.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:16.034Z,1478896756.033 [PNI_TCM](ERROR): CRC does not match. Expected:0x48050 got:0x49152
2016-11-11T20:39:16.054Z,1478896756.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:16.483Z,1478896756.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:16.776Z,1478896756.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:16.884Z,1478896756.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:17.242Z,1478896757.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:17.573Z,1478896757.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:17.635Z,1478896757.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:18.028Z,1478896758.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:18.036Z,1478896758.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:18.437Z,1478896758.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:18.824Z,1478896758.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:18.859Z,1478896758.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:19.228Z,1478896759.228 [PNI_TCM](ERROR): CRC does not match. Expected:0x64051 got:0x49579
2016-11-11T20:39:19.249Z,1478896759.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:19.621Z,1478896759.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:19.652Z,1478896759.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:20.038Z,1478896760.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:20.040Z,1478896760.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:20.437Z,1478896760.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:20.836Z,1478896760.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:20.839Z,1478896760.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:21.244Z,1478896761.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:21.632Z,1478896761.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:21.658Z,1478896761.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:22.040Z,1478896762.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:22.041Z,1478896762.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:22.440Z,1478896762.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:22.836Z,1478896762.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:22.842Z,1478896762.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:23.241Z,1478896763.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:23.632Z,1478896763.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:23.669Z,1478896763.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:24.025Z,1478896764.026 [PNI_TCM](ERROR): CRC does not match. Expected:0x23465 got:0x4124
2016-11-11T20:39:24.057Z,1478896764.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:24.096Z,1478896764.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:24.447Z,1478896764.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:24.831Z,1478896764.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:24.892Z,1478896764.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:25.249Z,1478896765.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:25.625Z,1478896765.625 [PNI_TCM](ERROR): CRC does not match. Expected:0x419 got:0x14343
2016-11-11T20:39:25.653Z,1478896765.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:25.688Z,1478896765.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:26.123Z,1478896766.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:26.436Z,1478896766.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:26.436Z,1478896766.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:26.846Z,1478896766.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:27.232Z,1478896767.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:27.236Z,1478896767.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:27.638Z,1478896767.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:28.029Z,1478896768.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:28.082Z,1478896768.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:28.440Z,1478896768.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:28.477Z,1478896768.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:28.840Z,1478896768.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:29.236Z,1478896769.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:29.254Z,1478896769.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:29.633Z,1478896769.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:29.956Z,1478896769.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:30.039Z,1478896770.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:30.458Z,1478896770.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:30.752Z,1478896770.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:30.833Z,1478896770.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:31.285Z,1478896771.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:31.549Z,1478896771.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:31.681Z,1478896771.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:31.976Z,1478896771.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:32.038Z,1478896772.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:32.445Z,1478896772.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:32.772Z,1478896772.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:32.841Z,1478896772.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:33.226Z,1478896773.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:33.569Z,1478896773.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:33.645Z,1478896773.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:33.981Z,1478896773.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:34.037Z,1478896774.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:34.432Z,1478896774.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:34.776Z,1478896774.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:34.845Z,1478896774.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:35.235Z,1478896775.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:35.573Z,1478896775.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:35.652Z,1478896775.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:35.992Z,1478896775.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:36.045Z,1478896776.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:36.444Z,1478896776.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:36.788Z,1478896776.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:36.832Z,1478896776.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:37.248Z,1478896777.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:37.595Z,1478896777.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:37.693Z,1478896777.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:38.033Z,1478896778.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:38.076Z,1478896778.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:38.433Z,1478896778.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:38.832Z,1478896778.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:38.872Z,1478896778.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:39.241Z,1478896779.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:39.635Z,1478896779.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:39.668Z,1478896779.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:40.082Z,1478896780.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:40.412Z,1478896780.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:40.450Z,1478896780.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:40.832Z,1478896780.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:41.208Z,1478896781.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:41.234Z,1478896781.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:41.632Z,1478896781.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:42.004Z,1478896782.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:42.082Z,1478896782.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:42.416Z,1478896782.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:42.445Z,1478896782.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:42.841Z,1478896782.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:43.212Z,1478896783.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:43.246Z,1478896783.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:43.681Z,1478896783.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:43.928Z,1478896783.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:44.073Z,1478896784.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:44.450Z,1478896784.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:44.724Z,1478896784.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:44.894Z,1478896784.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:45.229Z,1478896785.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:45.521Z,1478896785.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:45.680Z,1478896785.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:45.932Z,1478896785.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:46.080Z,1478896786.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:46.431Z,1478896786.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:46.728Z,1478896786.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:46.841Z,1478896786.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:47.242Z,1478896787.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:47.525Z,1478896787.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:47.634Z,1478896787.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:47.936Z,1478896787.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:48.040Z,1478896788.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:48.442Z,1478896788.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:48.732Z,1478896788.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:48.849Z,1478896788.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:49.229Z,1478896789.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:49.529Z,1478896789.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:49.637Z,1478896789.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:49.944Z,1478896789.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:50.029Z,1478896790.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:50.437Z,1478896790.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:50.740Z,1478896790.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:50.831Z,1478896790.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:51.231Z,1478896791.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:51.536Z,1478896791.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:51.682Z,1478896791.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:52.044Z,1478896792.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:52.072Z,1478896792.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:52.440Z,1478896792.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:52.843Z,1478896792.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:52.892Z,1478896792.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:53.241Z,1478896793.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:53.640Z,1478896793.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:53.688Z,1478896793.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:54.049Z,1478896794.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:54.388Z,1478896794.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:54.445Z,1478896794.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:54.831Z,1478896794.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:55.196Z,1478896795.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:55.247Z,1478896795.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:55.637Z,1478896795.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:55.992Z,1478896795.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:56.069Z,1478896796.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:56.404Z,1478896796.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:56.440Z,1478896796.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:56.448Z,1478896796.448 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T20:39:56.449Z,1478896796.449 [Default:CheckIn:C.Wait] Stopped
2016-11-11T20:39:56.449Z,1478896796.449 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T20:39:56.449Z,1478896796.449 [Default:CheckIn:D] Running Loop=1
2016-11-11T20:39:56.844Z,1478896796.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:56.853Z,1478896796.853 [Default:CheckIn:D] Stopped
2016-11-11T20:39:56.853Z,1478896796.853 [Default:CheckIn:E] Running Loop=1
2016-11-11T20:39:57.200Z,1478896797.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:57.249Z,1478896797.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:39:57.271Z,1478896797.271 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 949.925716 min 
2016-11-11T20:39:57.272Z,1478896797.272 [Default:CheckIn:E] Stopped
2016-11-11T20:39:57.272Z,1478896797.272 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T20:39:57.272Z,1478896797.272 [Default:CheckIn] Stopped
2016-11-11T20:39:57.272Z,1478896797.272 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T20:39:57.272Z,1478896797.272 [Default:CheckIn](INFO): Running loop #92
2016-11-11T20:39:57.272Z,1478896797.272 [Default:CheckIn] Running Loop=92
2016-11-11T20:39:57.272Z,1478896797.272 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T20:39:57.273Z,1478896797.273 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T20:39:57.904Z,1478896797.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:58.700Z,1478896798.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:59.497Z,1478896799.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:39:59.920Z,1478896799.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:00.666Z,1478896800.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:00.716Z,1478896800.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:00.745Z,1478896800.745 [NAL9602](INFO): Powering up
2016-11-11T20:40:00.794Z,1478896800.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:01.185Z,1478896801.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:01.513Z,1478896801.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:01.609Z,1478896801.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:01.945Z,1478896801.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:02.005Z,1478896802.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:02.358Z,1478896802.358 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T20:40:02.380Z,1478896802.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:02.740Z,1478896802.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:02.821Z,1478896802.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:03.197Z,1478896803.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:03.536Z,1478896803.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:03.604Z,1478896803.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:03.945Z,1478896803.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:03.987Z,1478896803.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:04.386Z,1478896804.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:04.742Z,1478896804.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:04.765Z,1478896804.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:05.187Z,1478896805.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:05.537Z,1478896805.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:05.639Z,1478896805.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:05.967Z,1478896805.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:06.012Z,1478896806.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:06.367Z,1478896806.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:06.773Z,1478896806.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:06.808Z,1478896806.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:07.176Z,1478896807.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:07.572Z,1478896807.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:07.604Z,1478896807.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:08.027Z,1478896808.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:08.368Z,1478896808.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:08.372Z,1478896808.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:08.777Z,1478896808.777 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:08.777Z,1478896808.777 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 296
2016-11-11T20:40:08.777Z,1478896808.777 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:40:08.784Z,1478896808.784 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:08.784Z,1478896808.784 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 296
2016-11-11T20:40:08.784Z,1478896808.784 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:40:08.786Z,1478896808.786 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:08.786Z,1478896808.786 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 296
2016-11-11T20:40:08.786Z,1478896808.786 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:40:08.812Z,1478896808.812 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:40:08.813Z,1478896808.813 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:40:08.813Z,1478896808.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:40:09.164Z,1478896809.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:09.187Z,1478896809.187 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:40:09.188Z,1478896809.188 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 296
2016-11-11T20:40:09.188Z,1478896809.188 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:40:09.188Z,1478896809.188 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 296
2016-11-11T20:40:09.189Z,1478896809.189 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:40:09.189Z,1478896809.189 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 296
2016-11-11T20:40:09.580Z,1478896809.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:40:09.581Z,1478896809.581 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:40:09.581Z,1478896809.581 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:40:09.586Z,1478896809.586 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:40:09.586Z,1478896809.586 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:40:09.587Z,1478896809.587 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:40:09.587Z,1478896809.587 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:40:09.588Z,1478896809.588 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:40:09.588Z,1478896809.588 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:40:09.962Z,1478896809.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:10.027Z,1478896810.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:10.366Z,1478896810.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:10.400Z,1478896810.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:10.793Z,1478896810.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:11.169Z,1478896811.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:11.196Z,1478896811.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:11.578Z,1478896811.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:11.884Z,1478896811.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:11.953Z,1478896811.953 [NAL9602](INFO): NAL9602 initialized
2016-11-11T20:40:12.003Z,1478896812.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:12.373Z,1478896812.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:12.680Z,1478896812.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:12.779Z,1478896812.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:13.193Z,1478896813.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:13.477Z,1478896813.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:13.584Z,1478896813.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:13.888Z,1478896813.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:13.980Z,1478896813.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:14.374Z,1478896814.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:14.684Z,1478896814.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:14.809Z,1478896814.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:15.174Z,1478896815.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:15.492Z,1478896815.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:15.605Z,1478896815.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:15.912Z,1478896815.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:15.965Z,1478896815.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:16.401Z,1478896816.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:16.708Z,1478896816.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:16.770Z,1478896816.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:17.205Z,1478896817.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:17.505Z,1478896817.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:17.617Z,1478896817.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:17.916Z,1478896817.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:17.981Z,1478896817.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:18.458Z,1478896818.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:18.712Z,1478896818.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:18.771Z,1478896818.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:19.171Z,1478896819.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:19.508Z,1478896819.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:19.636Z,1478896819.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:19.981Z,1478896819.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:20.016Z,1478896820.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:20.385Z,1478896820.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:20.769Z,1478896820.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:20.812Z,1478896820.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:21.168Z,1478896821.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:21.573Z,1478896821.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:21.608Z,1478896821.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:22.010Z,1478896822.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:22.356Z,1478896822.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:22.373Z,1478896822.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:22.773Z,1478896822.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:23.152Z,1478896823.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:23.168Z,1478896823.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:23.568Z,1478896823.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:23.949Z,1478896823.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:23.989Z,1478896823.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:24.373Z,1478896824.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:24.744Z,1478896824.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:24.810Z,1478896824.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:25.169Z,1478896825.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:25.204Z,1478896825.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:25.573Z,1478896825.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:25.872Z,1478896825.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:25.969Z,1478896825.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:26.372Z,1478896826.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:26.668Z,1478896826.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:26.777Z,1478896826.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:27.170Z,1478896827.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:27.465Z,1478896827.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:27.573Z,1478896827.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:27.876Z,1478896827.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:27.973Z,1478896827.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:28.377Z,1478896828.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:28.672Z,1478896828.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:28.777Z,1478896828.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:29.184Z,1478896829.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:29.469Z,1478896829.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:29.645Z,1478896829.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:29.880Z,1478896829.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:29.965Z,1478896829.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:30.364Z,1478896830.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:30.676Z,1478896830.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:30.803Z,1478896830.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:31.168Z,1478896831.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:31.473Z,1478896831.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:31.603Z,1478896831.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:31.884Z,1478896831.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:31.997Z,1478896831.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:32.375Z,1478896832.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:32.680Z,1478896832.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:32.771Z,1478896832.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:33.169Z,1478896833.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:33.477Z,1478896833.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:33.610Z,1478896833.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:33.967Z,1478896833.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:34.008Z,1478896834.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:34.373Z,1478896834.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:34.776Z,1478896834.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:34.804Z,1478896834.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:35.178Z,1478896835.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:35.577Z,1478896835.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:35.612Z,1478896835.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:35.988Z,1478896835.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:36.316Z,1478896836.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:36.378Z,1478896836.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:36.775Z,1478896836.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:37.112Z,1478896837.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:37.181Z,1478896837.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:37.580Z,1478896837.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:37.909Z,1478896837.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:38.002Z,1478896838.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:38.320Z,1478896838.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:38.373Z,1478896838.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:38.773Z,1478896838.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:39.116Z,1478896839.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:39.176Z,1478896839.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:39.581Z,1478896839.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:39.840Z,1478896839.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:39.977Z,1478896839.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:40.375Z,1478896840.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:40.636Z,1478896840.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:40.770Z,1478896840.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:41.178Z,1478896841.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:41.433Z,1478896841.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:41.577Z,1478896841.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:41.844Z,1478896841.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:41.981Z,1478896841.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:42.373Z,1478896842.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:42.640Z,1478896842.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:42.779Z,1478896842.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:43.176Z,1478896843.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:43.437Z,1478896843.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:43.578Z,1478896843.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:43.848Z,1478896843.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:43.933Z,1478896843.933 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-11T20:40:44.011Z,1478896844.011 [NAL9602](FAULT): received: 
+CSQ:0

OK9, 2, 0, 0, 0

OK
2016-11-11T20:40:44.011Z,1478896844.011 [NAL9602] Data Fault, FailCount= 4
2016-11-11T20:40:44.011Z,1478896844.011 [NAL9602](ERROR): Data Fault
2016-11-11T20:40:44.117Z,1478896844.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:44.158Z,1478896844.158 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T20:40:44.328Z,1478896844.328 [NAL9602](INFO): Powering down
2016-11-11T20:40:44.393Z,1478896844.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:44.644Z,1478896844.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:44.786Z,1478896844.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:45.197Z,1478896845.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:45.229Z,1478896845.230 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T20:40:45.230Z,1478896845.230 [NAL9602] No Fault, FailCount= 4
2016-11-11T20:40:45.441Z,1478896845.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:45.583Z,1478896845.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:45.852Z,1478896845.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:46.003Z,1478896846.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:46.401Z,1478896846.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:46.648Z,1478896846.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:46.783Z,1478896846.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:47.183Z,1478896847.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:47.444Z,1478896847.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:47.632Z,1478896847.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:47.969Z,1478896847.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:47.988Z,1478896847.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:48.368Z,1478896848.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:48.768Z,1478896848.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:48.792Z,1478896848.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:49.174Z,1478896849.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:49.529Z,1478896849.529 [NAL9602](INFO): Powering up NAL9602
2016-11-11T20:40:49.577Z,1478896849.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:49.588Z,1478896849.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:49.983Z,1478896849.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:50.296Z,1478896850.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:50.380Z,1478896850.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:50.777Z,1478896850.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:51.092Z,1478896851.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:51.176Z,1478896851.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:51.577Z,1478896851.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:51.889Z,1478896851.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:51.979Z,1478896851.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:52.300Z,1478896852.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:52.377Z,1478896852.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:52.765Z,1478896852.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:53.096Z,1478896853.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:53.184Z,1478896853.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:53.572Z,1478896853.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:53.820Z,1478896853.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:53.973Z,1478896853.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:54.370Z,1478896854.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:54.616Z,1478896854.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:54.772Z,1478896854.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:55.174Z,1478896855.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:55.413Z,1478896855.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:55.572Z,1478896855.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:55.824Z,1478896855.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:55.967Z,1478896855.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:56.368Z,1478896856.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:56.620Z,1478896856.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:56.773Z,1478896856.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:57.169Z,1478896857.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:57.417Z,1478896857.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:57.562Z,1478896857.562 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T20:40:57.563Z,1478896857.563 [BPC1] Data Fault, FailCount= 1
2016-11-11T20:40:57.563Z,1478896857.563 [BPC1](ERROR): Data Fault
2016-11-11T20:40:57.572Z,1478896857.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:40:57.592Z,1478896857.592 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T20:40:57.828Z,1478896857.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:58.624Z,1478896858.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:59.421Z,1478896859.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:40:59.832Z,1478896859.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:00.628Z,1478896860.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:00.920Z,1478896860.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:01.061Z,1478896861.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:01.360Z,1478896861.360 [NAL9602](INFO): NAL9602 initialized
2016-11-11T20:41:01.397Z,1478896861.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:01.424Z,1478896861.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:01.447Z,1478896861.447 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:41:01.447Z,1478896861.447 [BPC1] No Fault, FailCount= 1
2016-11-11T20:41:01.834Z,1478896861.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:01.916Z,1478896861.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:02.153Z,1478896862.153 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T20:41:02.153Z,1478896862.153 [NAL9602] Data Fault, FailCount= 5
2016-11-11T20:41:02.153Z,1478896862.153 [NAL9602](ERROR): Data Fault
2016-11-11T20:41:02.218Z,1478896862.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:02.292Z,1478896862.292 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T20:41:02.292Z,1478896862.292 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-11-11T20:41:02.561Z,1478896862.561 [NAL9602](INFO): Powering down
2016-11-11T20:41:02.608Z,1478896862.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:02.712Z,1478896862.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:03.002Z,1478896863.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:03.394Z,1478896863.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:03.508Z,1478896863.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:03.800Z,1478896863.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:04.211Z,1478896864.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:04.284Z,1478896864.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:04.609Z,1478896864.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:04.983Z,1478896864.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:05.080Z,1478896865.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:05.417Z,1478896865.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:05.795Z,1478896865.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:05.876Z,1478896865.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:06.199Z,1478896866.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:06.292Z,1478896866.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:06.601Z,1478896866.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:06.998Z,1478896866.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:07.088Z,1478896867.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:07.473Z,1478896867.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:07.790Z,1478896867.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:07.832Z,1478896867.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:08.196Z,1478896868.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:08.590Z,1478896868.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:08.628Z,1478896868.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:08.997Z,1478896868.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:09.424Z,1478896869.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:09.445Z,1478896869.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:09.788Z,1478896869.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:09.832Z,1478896869.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:10.193Z,1478896870.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:10.585Z,1478896870.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:10.628Z,1478896870.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:11.010Z,1478896871.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:11.425Z,1478896871.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:11.470Z,1478896871.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:11.797Z,1478896871.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:11.836Z,1478896871.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:12.197Z,1478896872.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:12.593Z,1478896872.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:12.633Z,1478896872.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:13.006Z,1478896873.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:13.428Z,1478896873.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:13.461Z,1478896873.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:13.794Z,1478896873.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:13.836Z,1478896873.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:14.247Z,1478896874.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:14.589Z,1478896874.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:14.632Z,1478896874.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:14.990Z,1478896874.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:15.426Z,1478896875.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:15.428Z,1478896875.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:15.803Z,1478896875.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:15.904Z,1478896875.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:16.220Z,1478896876.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:16.619Z,1478896876.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:16.700Z,1478896876.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:17.002Z,1478896877.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:17.404Z,1478896877.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:17.496Z,1478896877.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:17.804Z,1478896877.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:18.197Z,1478896878.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:18.268Z,1478896878.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:18.589Z,1478896878.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:19.031Z,1478896879.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:19.064Z,1478896879.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:19.394Z,1478896879.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:19.797Z,1478896879.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:19.860Z,1478896879.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:20.183Z,1478896880.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:20.272Z,1478896880.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:20.591Z,1478896880.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:20.988Z,1478896880.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:21.068Z,1478896881.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:21.426Z,1478896881.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:21.809Z,1478896881.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:21.820Z,1478896881.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:22.203Z,1478896882.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:22.595Z,1478896882.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:22.616Z,1478896882.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:23.006Z,1478896883.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:23.412Z,1478896883.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:23.458Z,1478896883.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:23.809Z,1478896883.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:23.822Z,1478896883.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:24.218Z,1478896884.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:24.589Z,1478896884.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:24.616Z,1478896884.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:24.984Z,1478896884.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:25.413Z,1478896885.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:25.440Z,1478896885.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:25.790Z,1478896885.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:25.824Z,1478896885.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:26.187Z,1478896886.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:26.593Z,1478896886.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:26.620Z,1478896886.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:26.990Z,1478896886.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:27.420Z,1478896887.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:27.450Z,1478896887.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:27.802Z,1478896887.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:27.828Z,1478896887.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:28.201Z,1478896888.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:28.592Z,1478896888.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:28.624Z,1478896888.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:29.052Z,1478896889.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:29.410Z,1478896889.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:29.420Z,1478896889.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:29.813Z,1478896889.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:29.872Z,1478896889.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:30.202Z,1478896890.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:30.617Z,1478896890.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:30.668Z,1478896890.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:31.017Z,1478896891.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:31.402Z,1478896891.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:31.464Z,1478896891.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:31.853Z,1478896891.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:32.190Z,1478896892.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:32.236Z,1478896892.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:32.594Z,1478896892.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:32.997Z,1478896892.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:33.032Z,1478896893.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:33.391Z,1478896893.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:33.828Z,1478896893.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:33.856Z,1478896893.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:34.192Z,1478896894.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:34.240Z,1478896894.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:34.611Z,1478896894.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:34.989Z,1478896894.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:35.036Z,1478896895.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:35.461Z,1478896895.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:35.776Z,1478896895.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:35.817Z,1478896895.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:36.204Z,1478896896.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:36.572Z,1478896896.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:36.619Z,1478896896.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:36.994Z,1478896896.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:37.369Z,1478896897.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:37.445Z,1478896897.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:37.804Z,1478896897.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:37.805Z,1478896897.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:38.196Z,1478896898.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:38.600Z,1478896898.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:38.603Z,1478896898.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:39.005Z,1478896899.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:39.396Z,1478896899.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:39.426Z,1478896899.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:39.803Z,1478896899.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:39.812Z,1478896899.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:40.214Z,1478896900.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:40.605Z,1478896900.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:40.608Z,1478896900.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:41.022Z,1478896901.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:41.404Z,1478896901.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:41.435Z,1478896901.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:41.802Z,1478896901.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:41.828Z,1478896901.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:42.220Z,1478896902.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:42.624Z,1478896902.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:42.627Z,1478896902.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:43.078Z,1478896903.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:43.424Z,1478896903.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:43.491Z,1478896903.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:43.837Z,1478896903.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:43.868Z,1478896903.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:44.213Z,1478896904.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:44.664Z,1478896904.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:44.676Z,1478896904.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:45.033Z,1478896905.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:45.387Z,1478896905.387 [PNI_TCM](ERROR): CRC does not match. Expected:0x20087 got:0x60096
2016-11-11T20:41:45.414Z,1478896905.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:45.460Z,1478896905.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:45.876Z,1478896905.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:46.207Z,1478896906.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:46.240Z,1478896906.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:46.595Z,1478896906.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:47.026Z,1478896907.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:47.036Z,1478896907.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:47.426Z,1478896907.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:47.832Z,1478896907.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:47.876Z,1478896907.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:48.210Z,1478896908.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:48.240Z,1478896908.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:48.616Z,1478896908.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:49.009Z,1478896909.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:49.036Z,1478896909.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:49.391Z,1478896909.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:49.789Z,1478896909.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:49.832Z,1478896909.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:50.194Z,1478896910.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:50.320Z,1478896910.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:50.614Z,1478896910.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:50.986Z,1478896910.986 [PNI_TCM](ERROR): CRC does not match. Expected:0x373 got:0x61723
2016-11-11T20:41:51.006Z,1478896911.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:51.116Z,1478896911.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:51.426Z,1478896911.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:51.728Z,1478896911.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:51.794Z,1478896911.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:52.221Z,1478896912.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:52.524Z,1478896912.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:52.592Z,1478896912.592 [PNI_TCM](ERROR): CRC does not match. Expected:0x2312 got:0x10269
2016-11-11T20:41:52.610Z,1478896912.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:53.016Z,1478896913.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:53.321Z,1478896913.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:53.441Z,1478896913.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:53.796Z,1478896913.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:53.861Z,1478896913.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:54.247Z,1478896914.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:54.592Z,1478896914.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:54.603Z,1478896914.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:54.998Z,1478896914.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:55.388Z,1478896915.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:55.411Z,1478896915.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:55.785Z,1478896915.785 [PNI_TCM](ERROR): CRC does not match. Expected:0x52156 got:0x17771
2016-11-11T20:41:55.803Z,1478896915.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:55.813Z,1478896915.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:56.195Z,1478896916.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:56.600Z,1478896916.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:56.602Z,1478896916.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:57.019Z,1478896917.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:57.397Z,1478896917.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:57.510Z,1478896917.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:57.825Z,1478896917.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:41:57.840Z,1478896917.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:58.637Z,1478896918.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:41:59.432Z,1478896919.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:00.200Z,1478896920.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:00.996Z,1478896920.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:01.793Z,1478896921.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:02.204Z,1478896922.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:02.000Z,1478896923.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:03.712Z,1478896923.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:04.508Z,1478896924.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:05.054Z,1478896925.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:05.209Z,1478896925.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:05.309Z,1478896925.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:05.614Z,1478896925.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:05.720Z,1478896925.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:06.007Z,1478896926.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:06.380Z,1478896926.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:06.516Z,1478896926.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:06.785Z,1478896926.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:07.189Z,1478896927.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:07.313Z,1478896927.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:07.601Z,1478896927.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:07.725Z,1478896927.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:07.996Z,1478896927.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:08.381Z,1478896928.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:08.520Z,1478896928.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:08.783Z,1478896928.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:09.185Z,1478896929.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:09.317Z,1478896929.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:09.582Z,1478896929.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:09.728Z,1478896929.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:09.974Z,1478896929.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:10.374Z,1478896930.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:10.524Z,1478896930.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:10.782Z,1478896930.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:11.166Z,1478896931.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:11.320Z,1478896931.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:11.598Z,1478896931.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:11.804Z,1478896931.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:11.981Z,1478896931.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:12.378Z,1478896932.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:12.600Z,1478896932.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:12.779Z,1478896932.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:13.189Z,1478896933.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:13.396Z,1478896933.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:13.567Z,1478896933.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:13.974Z,1478896933.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:14.164Z,1478896934.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:14.381Z,1478896934.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:14.794Z,1478896934.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:14.960Z,1478896934.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:15.194Z,1478896935.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:15.583Z,1478896935.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:15.757Z,1478896935.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:15.962Z,1478896935.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:16.168Z,1478896936.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:16.386Z,1478896936.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:16.788Z,1478896936.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:16.964Z,1478896936.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:17.160Z,1478896937.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:17.568Z,1478896937.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:17.692Z,1478896937.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:17.982Z,1478896937.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:18.364Z,1478896938.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:18.488Z,1478896938.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:18.763Z,1478896938.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:19.163Z,1478896939.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:19.285Z,1478896939.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:19.565Z,1478896939.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:19.696Z,1478896939.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:19.963Z,1478896939.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:20.365Z,1478896940.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:20.492Z,1478896940.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:20.764Z,1478896940.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:21.156Z,1478896941.156 [BPC1](ERROR): Failed to receive battery data
2016-11-11T20:42:21.156Z,1478896941.157 [BPC1] Communications Fault, FailCount= 1
2016-11-11T20:42:21.157Z,1478896941.157 [BPC1](ERROR): Communications Fault
2016-11-11T20:42:21.165Z,1478896941.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:21.198Z,1478896941.198 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T20:42:21.289Z,1478896941.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:21.565Z,1478896941.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:21.700Z,1478896941.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:21.964Z,1478896941.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:22.365Z,1478896942.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:22.385Z,1478896942.385 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:42:22.385Z,1478896942.385 [BPC1] No Fault, FailCount= 1
2016-11-11T20:42:22.496Z,1478896942.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:22.810Z,1478896942.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:23.190Z,1478896943.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:23.292Z,1478896943.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:23.564Z,1478896943.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:23.960Z,1478896943.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:24.088Z,1478896944.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:24.364Z,1478896944.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:24.765Z,1478896944.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:24.884Z,1478896944.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:25.163Z,1478896945.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:25.560Z,1478896945.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:25.686Z,1478896945.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:25.963Z,1478896945.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:26.359Z,1478896946.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:26.480Z,1478896946.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:26.760Z,1478896946.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:27.201Z,1478896947.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:27.280Z,1478896947.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:27.565Z,1478896947.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:27.989Z,1478896947.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:28.078Z,1478896948.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:28.364Z,1478896948.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:28.764Z,1478896948.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:28.872Z,1478896948.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:29.189Z,1478896949.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:29.563Z,1478896949.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:29.668Z,1478896949.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:29.989Z,1478896949.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:30.393Z,1478896950.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:30.464Z,1478896950.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:30.765Z,1478896950.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:31.164Z,1478896951.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:31.260Z,1478896951.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:31.560Z,1478896951.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:31.964Z,1478896951.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:32.056Z,1478896952.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:32.407Z,1478896952.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:32.764Z,1478896952.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:32.852Z,1478896952.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:33.164Z,1478896953.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:33.563Z,1478896953.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:33.648Z,1478896953.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:33.964Z,1478896953.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:34.365Z,1478896954.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:34.444Z,1478896954.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:34.763Z,1478896954.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:35.164Z,1478896955.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:35.240Z,1478896955.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:35.564Z,1478896955.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:35.965Z,1478896955.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:36.036Z,1478896956.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:36.364Z,1478896956.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:36.764Z,1478896956.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:36.832Z,1478896956.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:37.165Z,1478896957.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:37.564Z,1478896957.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:37.628Z,1478896957.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:37.964Z,1478896957.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:38.364Z,1478896958.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:38.424Z,1478896958.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:38.760Z,1478896958.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:39.164Z,1478896959.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:39.220Z,1478896959.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:39.627Z,1478896959.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:39.970Z,1478896959.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:40.016Z,1478896960.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:40.370Z,1478896960.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:40.424Z,1478896960.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:40.769Z,1478896960.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:40.832Z,1478896960.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:41.193Z,1478896961.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:41.240Z,1478896961.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:41.588Z,1478896961.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:41.648Z,1478896961.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:41.965Z,1478896961.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:42.056Z,1478896962.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:42.413Z,1478896962.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:42.464Z,1478896962.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:42.773Z,1478896962.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:42.873Z,1478896962.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:43.165Z,1478896963.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:43.292Z,1478896963.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:43.589Z,1478896963.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:43.705Z,1478896963.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:43.976Z,1478896963.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:44.116Z,1478896964.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:44.385Z,1478896964.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:44.524Z,1478896964.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:44.785Z,1478896964.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:45.170Z,1478896965.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:45.320Z,1478896965.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:45.569Z,1478896965.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:45.728Z,1478896965.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:45.971Z,1478896965.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:46.373Z,1478896966.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:46.524Z,1478896966.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:46.767Z,1478896966.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:47.168Z,1478896967.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:47.320Z,1478896967.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:47.577Z,1478896967.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:47.970Z,1478896967.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:48.116Z,1478896968.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:48.370Z,1478896968.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:48.524Z,1478896968.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:48.776Z,1478896968.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:49.177Z,1478896969.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:49.320Z,1478896969.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:49.566Z,1478896969.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:49.728Z,1478896969.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:49.965Z,1478896969.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:50.369Z,1478896970.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:50.524Z,1478896970.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:50.768Z,1478896970.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:51.176Z,1478896971.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:51.320Z,1478896971.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:51.580Z,1478896971.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:51.728Z,1478896971.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:51.980Z,1478896971.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:52.376Z,1478896972.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:52.524Z,1478896972.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:52.784Z,1478896972.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:53.179Z,1478896973.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:53.324Z,1478896973.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:53.576Z,1478896973.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:53.744Z,1478896973.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:53.980Z,1478896973.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:54.372Z,1478896974.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:54.540Z,1478896974.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:54.787Z,1478896974.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:55.197Z,1478896975.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:55.336Z,1478896975.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:55.565Z,1478896975.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:55.970Z,1478896975.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:56.104Z,1478896976.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:56.363Z,1478896976.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:56.801Z,1478896976.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:56.900Z,1478896976.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:57.173Z,1478896977.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:57.577Z,1478896977.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:57.697Z,1478896977.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:58.009Z,1478896978.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:42:58.108Z,1478896978.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:58.904Z,1478896978.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:42:59.624Z,1478896979.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:00.420Z,1478896980.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:01.217Z,1478896981.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:01.582Z,1478896981.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:01.632Z,1478896981.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:01.753Z,1478896981.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:02.122Z,1478896982.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:02.163Z,1478896982.163 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T20:43:02.163Z,1478896982.163 [NAL9602] No Fault, FailCount= 5
2016-11-11T20:43:02.428Z,1478896982.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:02.461Z,1478896982.461 [NAL9602](INFO): Powering up NAL9602
2016-11-11T20:43:02.582Z,1478896982.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:02.909Z,1478896982.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:03.231Z,1478896983.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:03.333Z,1478896983.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:03.677Z,1478896983.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:03.718Z,1478896983.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:04.153Z,1478896984.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:04.484Z,1478896984.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:04.514Z,1478896984.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:04.916Z,1478896984.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:05.280Z,1478896985.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:05.329Z,1478896985.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:05.688Z,1478896985.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:05.725Z,1478896985.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:06.124Z,1478896986.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:06.484Z,1478896986.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:06.517Z,1478896986.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:06.897Z,1478896986.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:07.280Z,1478896987.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:07.368Z,1478896987.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:07.714Z,1478896987.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:07.744Z,1478896987.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:08.116Z,1478896988.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:08.516Z,1478896988.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:08.540Z,1478896988.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:08.907Z,1478896988.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:09.319Z,1478896989.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:09.336Z,1478896989.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:09.780Z,1478896989.780 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:09.780Z,1478896989.780 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 297
2016-11-11T20:43:09.780Z,1478896989.780 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:43:09.804Z,1478896989.804 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:09.804Z,1478896989.804 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 297
2016-11-11T20:43:09.804Z,1478896989.804 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:43:09.806Z,1478896989.806 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:09.806Z,1478896989.806 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 297
2016-11-11T20:43:09.807Z,1478896989.806 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:43:09.846Z,1478896989.846 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:43:09.847Z,1478896989.847 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:43:09.847Z,1478896989.847 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:43:10.128Z,1478896990.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:10.147Z,1478896990.147 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:43:10.147Z,1478896990.148 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 297
2016-11-11T20:43:10.148Z,1478896990.148 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:43:10.148Z,1478896990.148 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 297
2016-11-11T20:43:10.149Z,1478896990.149 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:43:10.149Z,1478896990.149 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 297
2016-11-11T20:43:10.503Z,1478896990.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:43:10.504Z,1478896990.504 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:43:10.504Z,1478896990.504 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:43:10.509Z,1478896990.509 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:43:10.509Z,1478896990.509 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:43:10.509Z,1478896990.509 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:43:10.510Z,1478896990.510 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:43:10.510Z,1478896990.510 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:43:10.511Z,1478896990.511 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:43:10.913Z,1478896990.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:10.924Z,1478896990.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:11.312Z,1478896991.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:11.720Z,1478896991.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:11.748Z,1478896991.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:12.101Z,1478896992.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:12.128Z,1478896992.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:12.502Z,1478896992.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:12.905Z,1478896992.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:12.924Z,1478896992.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:13.261Z,1478896993.261 [NAL9602](INFO): NAL9602 initialized
2016-11-11T20:43:13.345Z,1478896993.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:13.600Z,1478896993.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:13.709Z,1478896993.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:14.118Z,1478896994.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:14.396Z,1478896994.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:14.553Z,1478896994.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:14.917Z,1478896994.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:15.192Z,1478896995.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:15.347Z,1478896995.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:15.761Z,1478896995.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:15.988Z,1478896995.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:16.113Z,1478896996.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:16.396Z,1478896996.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:16.537Z,1478896996.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:16.953Z,1478896996.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:17.193Z,1478896997.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:17.303Z,1478896997.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:17.604Z,1478896997.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:17.706Z,1478896997.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:18.117Z,1478896998.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:18.400Z,1478896998.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:18.511Z,1478896998.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:18.960Z,1478896998.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:19.207Z,1478896999.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:19.321Z,1478896999.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:19.632Z,1478896999.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:19.719Z,1478896999.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:20.113Z,1478897000.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:20.428Z,1478897000.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:20.538Z,1478897000.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:20.908Z,1478897000.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:21.224Z,1478897001.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:21.356Z,1478897001.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:21.725Z,1478897001.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:21.757Z,1478897001.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:22.112Z,1478897002.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:22.516Z,1478897002.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:22.552Z,1478897002.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:22.912Z,1478897002.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:23.313Z,1478897003.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:23.348Z,1478897003.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:23.739Z,1478897003.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:24.052Z,1478897004.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:24.114Z,1478897004.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:24.506Z,1478897004.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:24.848Z,1478897004.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:24.915Z,1478897004.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:25.317Z,1478897005.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:25.645Z,1478897005.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:25.754Z,1478897005.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:26.080Z,1478897006.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:26.127Z,1478897006.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:26.503Z,1478897006.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:26.878Z,1478897006.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:26.910Z,1478897006.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:27.361Z,1478897007.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:27.584Z,1478897007.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:27.717Z,1478897007.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:28.108Z,1478897008.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:28.381Z,1478897008.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:28.504Z,1478897008.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:28.915Z,1478897008.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:29.192Z,1478897009.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:29.353Z,1478897009.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:29.616Z,1478897009.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:29.713Z,1478897009.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:30.119Z,1478897010.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:30.412Z,1478897010.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:30.553Z,1478897010.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:30.925Z,1478897010.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:31.208Z,1478897011.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:31.373Z,1478897011.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:31.616Z,1478897011.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:31.753Z,1478897011.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:32.137Z,1478897012.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:32.412Z,1478897012.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:32.507Z,1478897012.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:32.915Z,1478897012.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:33.209Z,1478897013.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:33.340Z,1478897013.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:33.620Z,1478897013.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:33.708Z,1478897013.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:34.104Z,1478897014.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:34.416Z,1478897014.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:34.511Z,1478897014.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:34.937Z,1478897014.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:35.212Z,1478897015.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:35.350Z,1478897015.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:35.708Z,1478897015.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:35.717Z,1478897015.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:36.129Z,1478897016.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:36.504Z,1478897016.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:36.525Z,1478897016.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:36.965Z,1478897016.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:37.300Z,1478897017.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:37.313Z,1478897017.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:37.721Z,1478897017.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:38.036Z,1478897018.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:38.108Z,1478897018.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:38.511Z,1478897018.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:38.832Z,1478897018.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:38.918Z,1478897018.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:39.306Z,1478897019.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:39.629Z,1478897019.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:39.722Z,1478897019.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:40.048Z,1478897020.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:40.121Z,1478897020.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:40.525Z,1478897020.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:40.844Z,1478897020.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:40.921Z,1478897020.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:41.321Z,1478897021.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:41.560Z,1478897021.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:41.717Z,1478897021.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:42.095Z,1478897022.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:42.358Z,1478897022.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:42.537Z,1478897022.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:42.956Z,1478897022.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:43.153Z,1478897023.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:43.311Z,1478897023.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:43.564Z,1478897023.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:43.753Z,1478897023.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:44.113Z,1478897024.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:44.360Z,1478897024.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:44.507Z,1478897024.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:44.958Z,1478897024.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:45.169Z,1478897025.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:45.324Z,1478897025.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:45.588Z,1478897025.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:45.758Z,1478897025.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:46.124Z,1478897026.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:46.384Z,1478897026.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:46.530Z,1478897026.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:46.895Z,1478897026.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:47.180Z,1478897027.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:47.321Z,1478897027.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:47.588Z,1478897027.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:47.705Z,1478897027.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:48.151Z,1478897028.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:48.384Z,1478897028.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:48.537Z,1478897028.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:48.906Z,1478897028.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:49.180Z,1478897029.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:49.318Z,1478897029.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:49.712Z,1478897029.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:49.976Z,1478897029.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:50.122Z,1478897030.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:50.384Z,1478897030.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:50.519Z,1478897030.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:50.928Z,1478897030.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:51.180Z,1478897031.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:51.324Z,1478897031.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:51.713Z,1478897031.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:51.976Z,1478897031.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:52.147Z,1478897032.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:52.384Z,1478897032.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:52.519Z,1478897032.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:52.922Z,1478897032.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:53.180Z,1478897033.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:53.324Z,1478897033.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:53.740Z,1478897033.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:53.976Z,1478897033.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:54.129Z,1478897034.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:54.388Z,1478897034.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:54.506Z,1478897034.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:54.922Z,1478897034.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:55.185Z,1478897035.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:55.329Z,1478897035.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:55.596Z,1478897035.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:55.708Z,1478897035.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:56.113Z,1478897036.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:56.392Z,1478897036.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:56.510Z,1478897036.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:56.906Z,1478897036.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:57.188Z,1478897037.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:57.349Z,1478897037.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:57.596Z,1478897037.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:57.713Z,1478897037.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:58.141Z,1478897038.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:43:58.394Z,1478897038.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:59.188Z,1478897039.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:43:59.600Z,1478897039.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:00.396Z,1478897040.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:01.194Z,1478897041.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:01.564Z,1478897041.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:01.604Z,1478897041.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:01.668Z,1478897041.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:02.073Z,1478897042.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:02.400Z,1478897042.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:02.452Z,1478897042.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:02.871Z,1478897042.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:03.196Z,1478897043.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:03.336Z,1478897043.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:03.657Z,1478897043.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:03.676Z,1478897043.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:04.036Z,1478897044.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:04.441Z,1478897044.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:04.472Z,1478897044.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:04.841Z,1478897044.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:05.245Z,1478897045.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:05.268Z,1478897045.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:05.657Z,1478897045.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:05.988Z,1478897045.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:06.043Z,1478897046.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:06.461Z,1478897046.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:06.784Z,1478897046.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:06.856Z,1478897046.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:07.256Z,1478897047.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:07.581Z,1478897047.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:07.675Z,1478897047.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:08.004Z,1478897048.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:08.038Z,1478897048.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:08.435Z,1478897048.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:08.800Z,1478897048.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:08.847Z,1478897048.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:09.253Z,1478897049.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:09.516Z,1478897049.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:09.650Z,1478897049.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:10.042Z,1478897050.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:10.312Z,1478897050.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:10.456Z,1478897050.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:10.857Z,1478897050.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:11.109Z,1478897051.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:11.256Z,1478897051.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:11.520Z,1478897051.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:11.659Z,1478897051.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:12.070Z,1478897052.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:12.316Z,1478897052.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:12.465Z,1478897052.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:12.861Z,1478897052.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:13.113Z,1478897053.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:13.234Z,1478897053.234 [BPC1](ERROR): Failed to parse message.
2016-11-11T20:44:13.235Z,1478897053.234 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T20:44:13.235Z,1478897053.235 [BPC1] Data Fault, FailCount= 1
2016-11-11T20:44:13.235Z,1478897053.235 [BPC1](ERROR): Data Fault
2016-11-11T20:44:13.282Z,1478897053.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:13.323Z,1478897053.323 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T20:44:13.524Z,1478897053.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:13.658Z,1478897053.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:14.038Z,1478897054.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:14.320Z,1478897054.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:14.438Z,1478897054.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:14.496Z,1478897054.496 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:44:14.496Z,1478897054.496 [BPC1] No Fault, FailCount= 1
2016-11-11T20:44:14.915Z,1478897054.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:15.117Z,1478897055.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:15.280Z,1478897055.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:15.528Z,1478897055.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:15.639Z,1478897055.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:16.044Z,1478897056.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:16.324Z,1478897056.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:16.440Z,1478897056.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:16.853Z,1478897056.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:17.120Z,1478897057.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:17.273Z,1478897057.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:17.661Z,1478897057.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:17.668Z,1478897057.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:18.054Z,1478897058.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:18.448Z,1478897058.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:18.464Z,1478897058.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:18.849Z,1478897058.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:19.253Z,1478897059.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:19.260Z,1478897059.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:19.645Z,1478897059.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:19.960Z,1478897059.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:20.073Z,1478897060.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:20.439Z,1478897060.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:20.756Z,1478897060.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:20.845Z,1478897060.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:21.245Z,1478897061.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:21.553Z,1478897061.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:21.649Z,1478897061.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:21.964Z,1478897061.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:22.049Z,1478897062.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:22.460Z,1478897062.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:22.760Z,1478897062.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:22.854Z,1478897062.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:23.250Z,1478897063.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:23.488Z,1478897063.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:23.645Z,1478897063.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:24.053Z,1478897064.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:24.285Z,1478897064.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:24.452Z,1478897064.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:24.852Z,1478897064.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:25.086Z,1478897065.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:25.257Z,1478897065.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:25.508Z,1478897065.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:25.658Z,1478897065.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:26.065Z,1478897066.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:26.304Z,1478897066.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:26.445Z,1478897066.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:26.874Z,1478897066.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:27.101Z,1478897067.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:27.255Z,1478897067.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:27.512Z,1478897067.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:27.692Z,1478897067.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:28.083Z,1478897068.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:28.308Z,1478897068.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:28.460Z,1478897068.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:28.852Z,1478897068.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:29.104Z,1478897069.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:29.253Z,1478897069.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:29.512Z,1478897069.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:29.646Z,1478897069.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:30.049Z,1478897070.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:30.308Z,1478897070.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:30.445Z,1478897070.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:30.851Z,1478897070.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:31.104Z,1478897071.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:31.258Z,1478897071.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:31.648Z,1478897071.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:31.657Z,1478897071.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:32.037Z,1478897072.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:32.444Z,1478897072.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:32.461Z,1478897072.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:32.867Z,1478897072.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:33.240Z,1478897073.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:33.273Z,1478897073.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:33.648Z,1478897073.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:33.940Z,1478897073.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:34.044Z,1478897074.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:34.444Z,1478897074.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:34.737Z,1478897074.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:34.845Z,1478897074.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:35.249Z,1478897075.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:35.533Z,1478897075.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:35.649Z,1478897075.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:35.944Z,1478897075.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:36.054Z,1478897076.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:36.442Z,1478897076.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:36.740Z,1478897076.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:36.853Z,1478897076.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:37.249Z,1478897077.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:37.464Z,1478897077.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:37.655Z,1478897077.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:38.063Z,1478897078.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:38.260Z,1478897078.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:38.490Z,1478897078.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:38.881Z,1478897078.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:39.057Z,1478897079.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:39.249Z,1478897079.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:39.472Z,1478897079.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:39.679Z,1478897079.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:40.040Z,1478897080.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:40.268Z,1478897080.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:40.474Z,1478897080.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:40.896Z,1478897080.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:41.072Z,1478897081.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:41.242Z,1478897081.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:41.492Z,1478897081.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:41.650Z,1478897081.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:42.053Z,1478897082.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:42.288Z,1478897082.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:42.467Z,1478897082.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:42.867Z,1478897082.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:43.084Z,1478897083.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:43.250Z,1478897083.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:43.492Z,1478897083.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:43.653Z,1478897083.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:44.053Z,1478897084.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:44.288Z,1478897084.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:44.462Z,1478897084.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:44.858Z,1478897084.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:45.084Z,1478897085.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:45.253Z,1478897085.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:45.556Z,1478897085.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:45.645Z,1478897085.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:46.066Z,1478897086.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:46.352Z,1478897086.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:46.449Z,1478897086.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:46.845Z,1478897086.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:47.148Z,1478897087.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:47.249Z,1478897087.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:47.653Z,1478897087.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:47.916Z,1478897087.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:48.053Z,1478897088.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:48.456Z,1478897088.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:48.712Z,1478897088.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:48.854Z,1478897088.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:49.269Z,1478897089.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:49.509Z,1478897089.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:49.654Z,1478897089.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:49.920Z,1478897089.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:50.057Z,1478897090.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:50.437Z,1478897090.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:50.716Z,1478897090.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:50.833Z,1478897090.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:51.269Z,1478897091.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:51.444Z,1478897091.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:51.650Z,1478897091.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:52.050Z,1478897092.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:52.240Z,1478897092.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:52.441Z,1478897092.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:52.866Z,1478897092.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:53.037Z,1478897093.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:53.261Z,1478897093.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:53.448Z,1478897093.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:53.689Z,1478897093.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:54.067Z,1478897094.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:54.244Z,1478897094.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:54.445Z,1478897094.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:54.839Z,1478897094.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:55.041Z,1478897095.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:55.253Z,1478897095.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:55.452Z,1478897095.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:55.643Z,1478897095.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:56.049Z,1478897096.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:56.248Z,1478897096.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:56.454Z,1478897096.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:56.860Z,1478897096.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:57.045Z,1478897097.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:57.260Z,1478897097.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:57.456Z,1478897097.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:57.632Z,1478897097.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:57.665Z,1478897097.665 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T20:39:57.3Z
2016-11-11T20:44:57.665Z,1478897097.665 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T20:44:57.665Z,1478897097.665 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T20:44:58.039Z,1478897098.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:58.252Z,1478897098.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:58.913Z,1478897098.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:44:59.048Z,1478897099.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:44:59.548Z,1478897099.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:00.344Z,1478897100.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:01.140Z,1478897101.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:01.904Z,1478897101.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:02.146Z,1478897102.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:02.206Z,1478897102.206 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20161111T044527/Courier0368.lzma
2016-11-11T20:45:02.299Z,1478897102.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:02.676Z,1478897102.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:02.700Z,1478897102.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:02.998Z,1478897102.998 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0368.lzma.bak
2016-11-11T20:45:02.998Z,1478897102.998 [DataOverHttps](INFO): SBD MOMSN=4555744
2016-11-11T20:45:03.060Z,1478897103.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:03.499Z,1478897103.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:03.912Z,1478897103.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:04.482Z,1478897104.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:04.638Z,1478897104.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:04.708Z,1478897104.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:05.420Z,1478897105.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:06.216Z,1478897106.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:07.013Z,1478897107.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:07.424Z,1478897107.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:08.090Z,1478897108.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:08.193Z,1478897108.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:08.220Z,1478897108.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:08.605Z,1478897108.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:09.003Z,1478897109.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:09.016Z,1478897109.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:09.465Z,1478897109.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:09.752Z,1478897109.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:09.844Z,1478897109.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:10.548Z,1478897110.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:11.344Z,1478897111.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:11.752Z,1478897111.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:12.548Z,1478897112.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:13.344Z,1478897113.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:13.408Z,1478897113.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:13.465Z,1478897113.465 [DataOverHttps](INFO): Sending 255 bytes from file Logs/20161111T044527/Express0369.lzma
2016-11-11T20:45:13.525Z,1478897113.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:13.752Z,1478897113.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:13.906Z,1478897113.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:14.254Z,1478897114.254 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0369.lzma.bak
2016-11-11T20:45:14.254Z,1478897114.254 [DataOverHttps](INFO): SBD MOMSN=4555747
2016-11-11T20:45:14.322Z,1478897114.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:14.548Z,1478897114.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:15.344Z,1478897115.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:15.709Z,1478897115.709 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T20:45:15.761Z,1478897115.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:15.779Z,1478897115.779 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T20:45:15.779Z,1478897115.779 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T20:45:15.779Z,1478897115.779 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T20:45:15.860Z,1478897115.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:15.872Z,1478897115.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:16.656Z,1478897116.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:17.453Z,1478897117.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:17.880Z,1478897117.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:18.676Z,1478897118.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:19.318Z,1478897119.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:19.388Z,1478897119.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:19.446Z,1478897119.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:19.829Z,1478897119.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:20.184Z,1478897120.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:20.185Z,1478897120.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:20.628Z,1478897120.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:20.970Z,1478897120.970 [NAL9602](INFO): Powering down
2016-11-11T20:45:20.981Z,1478897120.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:21.050Z,1478897121.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:21.402Z,1478897121.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:21.420Z,1478897121.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:21.836Z,1478897121.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:22.212Z,1478897122.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:22.216Z,1478897122.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:22.614Z,1478897122.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:23.012Z,1478897123.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:23.053Z,1478897123.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:23.424Z,1478897123.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:23.426Z,1478897123.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:23.833Z,1478897123.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:24.190Z,1478897124.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:24.220Z,1478897124.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:24.589Z,1478897124.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:25.016Z,1478897125.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:25.054Z,1478897125.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:25.391Z,1478897125.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:25.440Z,1478897125.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:25.790Z,1478897125.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:26.190Z,1478897126.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:26.236Z,1478897126.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:26.609Z,1478897126.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:27.005Z,1478897127.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:27.032Z,1478897127.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:27.415Z,1478897127.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:27.472Z,1478897127.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:27.797Z,1478897127.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:28.197Z,1478897128.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:28.268Z,1478897128.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:28.597Z,1478897128.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:28.994Z,1478897128.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:29.064Z,1478897129.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:29.452Z,1478897129.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:29.793Z,1478897129.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:29.840Z,1478897129.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:30.204Z,1478897130.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:30.605Z,1478897130.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:30.636Z,1478897130.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:31.013Z,1478897131.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:31.387Z,1478897131.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:31.433Z,1478897131.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:31.800Z,1478897131.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:31.844Z,1478897131.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:32.197Z,1478897132.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:32.597Z,1478897132.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:32.640Z,1478897132.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:33.054Z,1478897133.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:33.372Z,1478897133.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:33.414Z,1478897133.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:33.790Z,1478897133.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:34.169Z,1478897134.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:34.205Z,1478897134.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:34.592Z,1478897134.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:34.966Z,1478897134.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:35.040Z,1478897135.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:35.376Z,1478897135.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:35.408Z,1478897135.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:35.834Z,1478897135.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:36.172Z,1478897136.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:36.191Z,1478897136.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:36.592Z,1478897136.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:36.968Z,1478897136.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:37.038Z,1478897137.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:37.420Z,1478897137.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:37.424Z,1478897137.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:37.794Z,1478897137.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:38.195Z,1478897138.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:38.216Z,1478897138.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:38.594Z,1478897138.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:38.000Z,1478897139.000 [BPC1](ERROR): Failed to receive battery data
2016-11-11T20:45:38.000Z,1478897139.000 [BPC1] Communications Fault, FailCount= 1
2016-11-11T20:45:39.000Z,1478897139.000 [BPC1](ERROR): Communications Fault
2016-11-11T20:45:39.012Z,1478897139.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:39.034Z,1478897139.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:39.083Z,1478897139.082 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T20:45:39.406Z,1478897139.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:39.420Z,1478897139.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:39.801Z,1478897139.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:40.204Z,1478897140.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:40.216Z,1478897140.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:40.225Z,1478897140.225 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:45:40.225Z,1478897140.225 [BPC1] No Fault, FailCount= 1
2016-11-11T20:45:40.646Z,1478897140.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:41.002Z,1478897141.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:41.017Z,1478897141.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:41.429Z,1478897141.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:41.472Z,1478897141.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:41.797Z,1478897141.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:42.215Z,1478897142.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:42.268Z,1478897142.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:42.603Z,1478897142.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:43.005Z,1478897143.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:43.064Z,1478897143.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:43.456Z,1478897143.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:43.817Z,1478897143.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:43.820Z,1478897143.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:44.192Z,1478897144.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:44.597Z,1478897144.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:44.616Z,1478897144.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:45.002Z,1478897145.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:45.412Z,1478897145.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:45.466Z,1478897145.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:45.809Z,1478897145.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:45.828Z,1478897145.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:46.186Z,1478897146.186 [PNI_TCM](ERROR): CRC does not match. Expected:0x50027 got:0x48768
2016-11-11T20:45:46.213Z,1478897146.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:46.595Z,1478897146.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:46.660Z,1478897146.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:47.026Z,1478897147.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:47.364Z,1478897147.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:47.429Z,1478897147.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:47.794Z,1478897147.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:48.160Z,1478897148.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:48.247Z,1478897148.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:48.609Z,1478897148.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:48.958Z,1478897148.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:49.027Z,1478897149.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:49.369Z,1478897149.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:49.405Z,1478897149.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:49.805Z,1478897149.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:50.165Z,1478897150.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:50.204Z,1478897150.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:50.591Z,1478897150.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:50.961Z,1478897150.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:50.999Z,1478897150.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:51.390Z,1478897151.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:51.756Z,1478897151.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:51.826Z,1478897151.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:52.184Z,1478897152.184 [PNI_TCM](ERROR): CRC does not match. Expected:0x44530 got:0x17049
2016-11-11T20:45:52.241Z,1478897152.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:52.552Z,1478897152.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:52.606Z,1478897152.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:52.999Z,1478897152.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:53.348Z,1478897153.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:53.422Z,1478897153.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:53.811Z,1478897153.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:54.152Z,1478897154.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:54.229Z,1478897154.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:54.625Z,1478897154.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:54.948Z,1478897154.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:55.023Z,1478897155.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:55.387Z,1478897155.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:55.757Z,1478897155.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:55.817Z,1478897155.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:56.189Z,1478897156.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:56.552Z,1478897156.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:56.617Z,1478897156.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:56.989Z,1478897156.989 [PNI_TCM](ERROR): CRC does not match. Expected:0x5023 got:0x60224
2016-11-11T20:45:57.069Z,1478897157.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:57.348Z,1478897157.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:57.422Z,1478897157.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:57.791Z,1478897157.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:58.168Z,1478897158.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:58.209Z,1478897158.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:58.609Z,1478897158.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:58.972Z,1478897158.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:58.995Z,1478897158.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:59.412Z,1478897159.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:45:59.769Z,1478897159.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:45:59.844Z,1478897159.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:00.198Z,1478897160.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:00.564Z,1478897160.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:00.586Z,1478897160.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:00.989Z,1478897160.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:01.360Z,1478897161.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:01.413Z,1478897161.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:01.782Z,1478897161.782 [PNI_TCM](ERROR): CRC does not match. Expected:0x19349 got:0x1857
2016-11-11T20:46:01.816Z,1478897161.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:02.156Z,1478897162.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:02.186Z,1478897162.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:02.589Z,1478897162.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:02.952Z,1478897162.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:02.996Z,1478897162.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:03.419Z,1478897163.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:03.724Z,1478897163.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:03.805Z,1478897163.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:04.132Z,1478897164.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:04.213Z,1478897164.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:04.544Z,1478897164.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:04.613Z,1478897164.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:04.952Z,1478897164.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:05.013Z,1478897165.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:05.364Z,1478897165.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:05.413Z,1478897165.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:05.772Z,1478897165.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:05.826Z,1478897165.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:06.180Z,1478897166.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:06.203Z,1478897166.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:06.588Z,1478897166.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:06.611Z,1478897166.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:07.002Z,1478897167.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:07.312Z,1478897167.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:07.394Z,1478897167.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:07.825Z,1478897167.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:08.108Z,1478897168.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:08.195Z,1478897168.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:08.629Z,1478897168.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:08.904Z,1478897168.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:09.070Z,1478897169.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:09.404Z,1478897169.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:09.420Z,1478897169.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:09.801Z,1478897169.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:10.200Z,1478897170.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:10.216Z,1478897170.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:10.601Z,1478897170.601 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:10.601Z,1478897170.601 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 298
2016-11-11T20:46:10.601Z,1478897170.601 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:46:10.608Z,1478897170.608 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:10.608Z,1478897170.608 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 298
2016-11-11T20:46:10.608Z,1478897170.608 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:46:10.610Z,1478897170.610 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:10.610Z,1478897170.610 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 298
2016-11-11T20:46:10.610Z,1478897170.610 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:46:10.649Z,1478897170.649 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:46:10.650Z,1478897170.650 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:46:10.650Z,1478897170.650 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:46:11.012Z,1478897171.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:11.016Z,1478897171.016 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:46:11.016Z,1478897171.016 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 298
2016-11-11T20:46:11.016Z,1478897171.016 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:46:11.016Z,1478897171.016 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 298
2016-11-11T20:46:11.017Z,1478897171.017 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:46:11.017Z,1478897171.017 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 298
2016-11-11T20:46:11.468Z,1478897171.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:46:11.469Z,1478897171.469 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:46:11.469Z,1478897171.469 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:46:11.478Z,1478897171.478 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:46:11.479Z,1478897171.479 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:46:11.483Z,1478897171.483 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:46:11.484Z,1478897171.484 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:46:11.484Z,1478897171.484 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:46:11.485Z,1478897171.485 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:46:11.788Z,1478897171.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:11.806Z,1478897171.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:12.192Z,1478897172.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:12.584Z,1478897172.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:12.595Z,1478897172.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:13.001Z,1478897173.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:13.381Z,1478897173.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:13.441Z,1478897173.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:13.792Z,1478897173.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:13.809Z,1478897173.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:14.209Z,1478897174.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:14.252Z,1478897174.253 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T20:46:14.588Z,1478897174.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:14.609Z,1478897174.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:15.019Z,1478897175.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:15.308Z,1478897175.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:15.397Z,1478897175.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:15.796Z,1478897175.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:16.104Z,1478897176.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:16.201Z,1478897176.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:16.901Z,1478897176.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:17.312Z,1478897177.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:18.108Z,1478897178.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:18.905Z,1478897178.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:19.320Z,1478897179.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:19.738Z,1478897179.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:19.869Z,1478897179.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:20.116Z,1478897180.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:20.259Z,1478897180.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:20.647Z,1478897180.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:20.913Z,1478897180.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:21.045Z,1478897181.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:21.320Z,1478897181.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:21.457Z,1478897181.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:21.833Z,1478897181.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:22.116Z,1478897182.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:22.227Z,1478897182.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:22.661Z,1478897182.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:22.912Z,1478897182.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:23.068Z,1478897183.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:23.398Z,1478897183.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:23.461Z,1478897183.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:23.858Z,1478897183.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:24.194Z,1478897184.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:24.242Z,1478897184.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:24.636Z,1478897184.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:24.988Z,1478897184.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:25.042Z,1478897185.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:25.444Z,1478897185.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:25.748Z,1478897185.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:25.832Z,1478897185.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:26.246Z,1478897186.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:26.544Z,1478897186.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:26.645Z,1478897186.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:27.020Z,1478897187.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:27.341Z,1478897187.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:27.427Z,1478897187.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:27.752Z,1478897187.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:27.830Z,1478897187.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:28.228Z,1478897188.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:28.548Z,1478897188.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:28.638Z,1478897188.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:29.025Z,1478897189.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:29.316Z,1478897189.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:29.427Z,1478897189.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:29.837Z,1478897189.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:30.112Z,1478897190.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:30.227Z,1478897190.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:30.627Z,1478897190.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:30.909Z,1478897190.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:31.034Z,1478897191.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:31.320Z,1478897191.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:31.441Z,1478897191.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:31.828Z,1478897191.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:32.116Z,1478897192.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:32.237Z,1478897192.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:32.638Z,1478897192.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:32.912Z,1478897192.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:33.028Z,1478897193.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:33.320Z,1478897193.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:33.436Z,1478897193.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:33.838Z,1478897193.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:34.116Z,1478897194.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:34.230Z,1478897194.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:34.646Z,1478897194.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:34.912Z,1478897194.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:35.039Z,1478897195.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:35.332Z,1478897195.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:35.430Z,1478897195.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:35.857Z,1478897195.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:36.128Z,1478897196.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:36.241Z,1478897196.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:36.657Z,1478897196.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:36.924Z,1478897196.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:37.056Z,1478897197.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:37.420Z,1478897197.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:37.454Z,1478897197.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:37.820Z,1478897197.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:38.216Z,1478897198.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:38.261Z,1478897198.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:38.625Z,1478897198.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:39.012Z,1478897199.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:39.027Z,1478897199.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:39.426Z,1478897199.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:39.724Z,1478897199.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:39.840Z,1478897199.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:40.227Z,1478897200.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:40.520Z,1478897200.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:40.635Z,1478897200.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:41.033Z,1478897201.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:41.317Z,1478897201.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:41.427Z,1478897201.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:41.732Z,1478897201.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:41.839Z,1478897201.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:42.258Z,1478897202.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:42.532Z,1478897202.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:42.634Z,1478897202.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:43.034Z,1478897203.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:43.269Z,1478897203.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:43.454Z,1478897203.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:43.838Z,1478897203.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:44.064Z,1478897204.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:44.246Z,1478897204.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:44.640Z,1478897204.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:44.860Z,1478897204.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:45.042Z,1478897205.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:45.352Z,1478897205.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:45.422Z,1478897205.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:45.870Z,1478897205.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:46.148Z,1478897206.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:46.242Z,1478897206.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:46.650Z,1478897206.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:46.944Z,1478897206.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:47.060Z,1478897207.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:47.352Z,1478897207.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:47.438Z,1478897207.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:47.873Z,1478897207.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:48.148Z,1478897208.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:48.245Z,1478897208.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:48.622Z,1478897208.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:48.945Z,1478897208.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:49.054Z,1478897209.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:49.356Z,1478897209.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:49.470Z,1478897209.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:49.834Z,1478897209.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:50.152Z,1478897210.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:50.235Z,1478897210.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:50.666Z,1478897210.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:50.949Z,1478897210.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:51.103Z,1478897211.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:51.360Z,1478897211.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:51.425Z,1478897211.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:51.856Z,1478897211.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:52.156Z,1478897212.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:52.226Z,1478897212.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:52.624Z,1478897212.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:52.952Z,1478897212.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:53.062Z,1478897213.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:53.422Z,1478897213.422 [BPC1](ERROR): Failed to receive battery data
2016-11-11T20:46:53.422Z,1478897213.422 [BPC1] Communications Fault, FailCount= 1
2016-11-11T20:46:53.422Z,1478897213.422 [BPC1](ERROR): Communications Fault
2016-11-11T20:46:53.439Z,1478897213.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:53.500Z,1478897213.500 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T20:46:53.700Z,1478897213.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:53.864Z,1478897213.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:54.227Z,1478897214.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:54.496Z,1478897214.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:54.650Z,1478897214.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:54.697Z,1478897214.697 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:46:54.697Z,1478897214.697 [BPC1] No Fault, FailCount= 1
2016-11-11T20:46:55.081Z,1478897215.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:55.293Z,1478897215.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:55.488Z,1478897215.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:55.736Z,1478897215.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:55.849Z,1478897215.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:56.248Z,1478897216.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:56.532Z,1478897216.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:56.653Z,1478897216.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:57.034Z,1478897217.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:57.236Z,1478897217.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:57.445Z,1478897217.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:57.845Z,1478897217.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:58.032Z,1478897218.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:58.238Z,1478897218.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:58.649Z,1478897218.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:58.829Z,1478897218.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:59.022Z,1478897219.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:59.240Z,1478897219.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:46:59.422Z,1478897219.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:46:59.861Z,1478897219.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:00.036Z,1478897220.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:00.243Z,1478897220.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:00.647Z,1478897220.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:00.833Z,1478897220.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:01.045Z,1478897221.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:01.244Z,1478897221.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:01.433Z,1478897221.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:01.841Z,1478897221.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:02.040Z,1478897222.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:02.245Z,1478897222.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:02.635Z,1478897222.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:02.837Z,1478897222.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:03.045Z,1478897223.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:03.248Z,1478897223.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:03.454Z,1478897223.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:03.849Z,1478897223.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:04.044Z,1478897224.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:04.250Z,1478897224.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:04.660Z,1478897224.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:04.841Z,1478897224.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:05.042Z,1478897225.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:05.328Z,1478897225.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:05.438Z,1478897225.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:05.841Z,1478897225.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:06.124Z,1478897226.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:06.241Z,1478897226.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:06.635Z,1478897226.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:06.920Z,1478897226.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:07.090Z,1478897227.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:07.481Z,1478897227.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:07.692Z,1478897227.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:07.838Z,1478897227.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:08.261Z,1478897228.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:08.488Z,1478897228.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:08.639Z,1478897228.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:09.074Z,1478897229.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:09.285Z,1478897229.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:09.457Z,1478897229.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:09.696Z,1478897229.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:09.840Z,1478897229.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:10.250Z,1478897230.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:10.492Z,1478897230.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:10.644Z,1478897230.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:11.054Z,1478897231.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:11.208Z,1478897231.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:11.438Z,1478897231.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:11.841Z,1478897231.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:12.004Z,1478897232.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:12.245Z,1478897232.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:12.645Z,1478897232.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:12.801Z,1478897232.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:13.049Z,1478897233.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:13.212Z,1478897233.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:13.456Z,1478897233.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:13.842Z,1478897233.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:14.008Z,1478897234.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:14.249Z,1478897234.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:14.660Z,1478897234.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:14.806Z,1478897234.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:15.034Z,1478897235.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:15.224Z,1478897235.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:15.445Z,1478897235.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:15.848Z,1478897235.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:16.021Z,1478897236.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:16.229Z,1478897236.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:16.817Z,1478897236.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:17.228Z,1478897237.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:18.024Z,1478897238.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:18.820Z,1478897238.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:19.310Z,1478897239.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:19.752Z,1478897239.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:19.883Z,1478897239.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:20.104Z,1478897240.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:20.265Z,1478897240.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:20.669Z,1478897240.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:20.900Z,1478897240.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:21.068Z,1478897241.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:21.529Z,1478897241.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:21.656Z,1478897241.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:21.870Z,1478897241.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:22.285Z,1478897242.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:22.452Z,1478897242.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:22.673Z,1478897242.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:23.085Z,1478897243.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:23.249Z,1478897243.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:23.486Z,1478897243.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:23.696Z,1478897243.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:23.873Z,1478897243.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:24.257Z,1478897244.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:24.492Z,1478897244.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:24.655Z,1478897244.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:25.112Z,1478897245.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:25.188Z,1478897245.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:25.460Z,1478897245.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:25.855Z,1478897245.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:25.984Z,1478897245.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:26.258Z,1478897246.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:26.663Z,1478897246.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:26.785Z,1478897246.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:27.064Z,1478897247.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:27.204Z,1478897247.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:27.458Z,1478897247.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:27.868Z,1478897247.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:27.000Z,1478897248.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:28.260Z,1478897248.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:28.665Z,1478897248.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:28.797Z,1478897248.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:29.068Z,1478897249.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:29.208Z,1478897249.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:29.473Z,1478897249.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:29.868Z,1478897249.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:30.004Z,1478897250.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:30.282Z,1478897250.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:30.669Z,1478897250.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:30.801Z,1478897250.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:31.069Z,1478897251.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:31.208Z,1478897251.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:31.465Z,1478897251.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:31.861Z,1478897251.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:32.004Z,1478897252.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:32.267Z,1478897252.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:32.672Z,1478897252.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:32.800Z,1478897252.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:33.072Z,1478897253.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:33.284Z,1478897253.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:33.468Z,1478897253.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:33.863Z,1478897253.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:34.080Z,1478897254.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:34.272Z,1478897254.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:34.673Z,1478897254.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:34.876Z,1478897254.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:35.093Z,1478897255.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:35.489Z,1478897255.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:35.636Z,1478897255.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:35.862Z,1478897255.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:36.299Z,1478897256.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:36.434Z,1478897256.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:36.674Z,1478897256.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:37.078Z,1478897257.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:37.228Z,1478897257.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:37.482Z,1478897257.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:37.864Z,1478897257.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:38.024Z,1478897258.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:38.350Z,1478897258.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:38.679Z,1478897258.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:38.820Z,1478897258.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:39.057Z,1478897259.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:39.228Z,1478897259.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:39.465Z,1478897259.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:39.636Z,1478897259.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:39.855Z,1478897259.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:40.258Z,1478897260.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:40.432Z,1478897260.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:40.665Z,1478897260.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:41.072Z,1478897261.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:41.164Z,1478897261.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:41.473Z,1478897261.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:41.871Z,1478897261.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:41.960Z,1478897261.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:42.272Z,1478897262.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:42.668Z,1478897262.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:42.757Z,1478897262.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:43.059Z,1478897263.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:43.168Z,1478897263.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:43.459Z,1478897263.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:43.859Z,1478897263.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:43.964Z,1478897263.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:44.265Z,1478897264.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:44.669Z,1478897264.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:44.761Z,1478897264.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:45.076Z,1478897265.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:45.172Z,1478897265.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:45.452Z,1478897265.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:45.857Z,1478897265.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:45.970Z,1478897265.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:46.252Z,1478897266.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:46.665Z,1478897266.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:46.764Z,1478897266.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:47.059Z,1478897267.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:47.256Z,1478897267.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:47.459Z,1478897267.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:47.869Z,1478897267.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:48.052Z,1478897268.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:48.265Z,1478897268.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:48.663Z,1478897268.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:48.848Z,1478897268.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:49.063Z,1478897269.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:49.522Z,1478897269.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:49.612Z,1478897269.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:49.862Z,1478897269.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:50.286Z,1478897270.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:50.408Z,1478897270.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:50.672Z,1478897270.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:51.085Z,1478897271.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:51.205Z,1478897271.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:51.489Z,1478897271.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:51.616Z,1478897271.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:51.872Z,1478897271.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:52.271Z,1478897272.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:52.412Z,1478897272.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:52.685Z,1478897272.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:53.055Z,1478897273.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:53.152Z,1478897273.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:53.457Z,1478897273.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:53.858Z,1478897273.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:53.948Z,1478897273.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:54.265Z,1478897274.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:54.658Z,1478897274.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:54.745Z,1478897274.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:55.073Z,1478897275.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:55.156Z,1478897275.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:55.461Z,1478897275.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:55.863Z,1478897275.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:55.952Z,1478897275.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:56.300Z,1478897276.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:56.656Z,1478897276.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:56.749Z,1478897276.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:57.062Z,1478897277.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:57.160Z,1478897277.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:57.463Z,1478897277.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:57.870Z,1478897277.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:57.956Z,1478897277.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:58.267Z,1478897278.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:58.662Z,1478897278.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:58.753Z,1478897278.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:59.069Z,1478897279.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:59.164Z,1478897279.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:47:59.475Z,1478897279.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:59.877Z,1478897279.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:47:59.960Z,1478897279.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:00.261Z,1478897280.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:00.656Z,1478897280.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:00.756Z,1478897280.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:01.064Z,1478897281.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:01.244Z,1478897281.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:01.461Z,1478897281.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:01.858Z,1478897281.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:02.040Z,1478897282.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:02.258Z,1478897282.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:02.652Z,1478897282.652 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T20:48:02.652Z,1478897282.652 [BPC1] Data Fault, FailCount= 1
2016-11-11T20:48:02.652Z,1478897282.652 [BPC1](ERROR): Data Fault
2016-11-11T20:48:02.661Z,1478897282.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:02.704Z,1478897282.704 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T20:48:02.836Z,1478897282.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:03.068Z,1478897283.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:03.465Z,1478897283.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:03.592Z,1478897283.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:03.865Z,1478897283.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:03.909Z,1478897283.909 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:48:03.909Z,1478897283.909 [BPC1] No Fault, FailCount= 1
2016-11-11T20:48:04.325Z,1478897284.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:04.388Z,1478897284.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:04.701Z,1478897284.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:05.072Z,1478897285.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:05.184Z,1478897285.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:05.469Z,1478897285.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:05.596Z,1478897285.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:05.873Z,1478897285.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:06.272Z,1478897286.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:06.392Z,1478897286.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:06.665Z,1478897286.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:07.065Z,1478897287.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:07.120Z,1478897287.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:07.465Z,1478897287.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:07.863Z,1478897287.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:07.916Z,1478897287.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:08.278Z,1478897288.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:08.653Z,1478897288.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:08.713Z,1478897288.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:09.073Z,1478897289.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:09.124Z,1478897289.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:09.468Z,1478897289.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:09.861Z,1478897289.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:09.920Z,1478897289.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:10.268Z,1478897290.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:10.669Z,1478897290.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:10.716Z,1478897290.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:11.073Z,1478897291.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:11.150Z,1478897291.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:11.468Z,1478897291.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:11.867Z,1478897291.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:11.944Z,1478897291.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:12.266Z,1478897292.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:12.669Z,1478897292.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:12.740Z,1478897292.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:13.057Z,1478897293.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:13.148Z,1478897293.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:13.459Z,1478897293.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:13.861Z,1478897293.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:13.944Z,1478897293.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:14.259Z,1478897294.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:14.669Z,1478897294.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:14.740Z,1478897294.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:15.065Z,1478897295.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:15.212Z,1478897295.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:15.460Z,1478897295.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:15.864Z,1478897295.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:16.008Z,1478897296.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:16.262Z,1478897296.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:16.804Z,1478897296.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:17.584Z,1478897297.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:18.380Z,1478897298.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:19.177Z,1478897299.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:19.589Z,1478897299.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:19.737Z,1478897299.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:19.869Z,1478897299.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:20.241Z,1478897300.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:20.384Z,1478897300.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:20.715Z,1478897300.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:21.044Z,1478897301.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:21.120Z,1478897301.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:21.483Z,1478897301.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:21.865Z,1478897301.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:21.917Z,1478897301.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:22.241Z,1478897302.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:22.647Z,1478897302.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:22.712Z,1478897302.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:23.041Z,1478897303.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:23.136Z,1478897303.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:23.439Z,1478897303.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:23.841Z,1478897303.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:23.932Z,1478897303.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:24.241Z,1478897304.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:24.647Z,1478897304.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:24.733Z,1478897304.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:25.041Z,1478897305.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:25.140Z,1478897305.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:25.441Z,1478897305.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:25.835Z,1478897305.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:25.936Z,1478897305.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:26.241Z,1478897306.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:26.641Z,1478897306.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:26.732Z,1478897306.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:27.038Z,1478897307.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:27.144Z,1478897307.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:27.449Z,1478897307.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:27.846Z,1478897307.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:27.940Z,1478897307.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:28.244Z,1478897308.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:28.644Z,1478897308.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:28.736Z,1478897308.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:29.044Z,1478897309.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:29.196Z,1478897309.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:29.438Z,1478897309.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:29.845Z,1478897309.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:29.992Z,1478897309.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:30.248Z,1478897310.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:30.636Z,1478897310.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:30.788Z,1478897310.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:31.053Z,1478897311.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:31.433Z,1478897311.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:31.556Z,1478897311.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:31.832Z,1478897311.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:32.236Z,1478897312.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:32.352Z,1478897312.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:32.636Z,1478897312.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:33.040Z,1478897313.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:33.149Z,1478897313.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:33.445Z,1478897313.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:33.568Z,1478897313.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:33.858Z,1478897313.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:34.265Z,1478897314.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:34.364Z,1478897314.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:34.699Z,1478897314.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:35.054Z,1478897315.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:35.092Z,1478897315.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:35.433Z,1478897315.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:35.881Z,1478897315.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:35.888Z,1478897315.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:36.263Z,1478897316.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:36.673Z,1478897316.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:36.685Z,1478897316.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:37.035Z,1478897317.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:37.096Z,1478897317.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:37.441Z,1478897317.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:37.843Z,1478897317.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:37.892Z,1478897317.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:38.242Z,1478897318.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:38.689Z,1478897318.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:38.721Z,1478897318.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:39.038Z,1478897319.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:39.100Z,1478897319.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:39.447Z,1478897319.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:39.846Z,1478897319.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:39.896Z,1478897319.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:40.245Z,1478897320.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:40.693Z,1478897320.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:40.708Z,1478897320.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:41.051Z,1478897321.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:41.104Z,1478897321.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:41.444Z,1478897321.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:41.848Z,1478897321.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:41.900Z,1478897321.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:42.228Z,1478897322.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:42.628Z,1478897322.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:42.696Z,1478897322.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:43.061Z,1478897323.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:43.168Z,1478897323.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:43.446Z,1478897323.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:43.836Z,1478897323.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:43.964Z,1478897323.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:44.245Z,1478897324.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:44.644Z,1478897324.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:44.760Z,1478897324.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:45.036Z,1478897325.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:45.444Z,1478897325.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:45.540Z,1478897325.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:45.849Z,1478897325.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:46.241Z,1478897326.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:46.336Z,1478897326.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:46.640Z,1478897326.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:47.048Z,1478897327.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:47.132Z,1478897327.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:47.435Z,1478897327.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:47.544Z,1478897327.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:47.841Z,1478897327.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:48.235Z,1478897328.235 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T20:48:48.235Z,1478897328.235 [BPC1] Data Fault, FailCount= 1
2016-11-11T20:48:48.235Z,1478897328.236 [BPC1](ERROR): Data Fault
2016-11-11T20:48:48.249Z,1478897328.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:48.292Z,1478897328.292 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T20:48:48.340Z,1478897328.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:48.687Z,1478897328.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:49.049Z,1478897329.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:49.137Z,1478897329.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:49.448Z,1478897329.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:49.478Z,1478897329.478 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:48:49.478Z,1478897329.478 [BPC1] No Fault, FailCount= 1
2016-11-11T20:48:49.896Z,1478897329.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:49.932Z,1478897329.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:50.264Z,1478897330.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:50.710Z,1478897330.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:50.728Z,1478897330.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:51.035Z,1478897331.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:51.136Z,1478897331.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:51.437Z,1478897331.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:51.841Z,1478897331.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:51.932Z,1478897331.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:52.241Z,1478897332.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:52.699Z,1478897332.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:52.728Z,1478897332.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:53.034Z,1478897333.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:53.136Z,1478897333.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:53.437Z,1478897333.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:53.835Z,1478897333.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:53.932Z,1478897333.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:54.241Z,1478897334.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:54.698Z,1478897334.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:54.728Z,1478897334.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:55.043Z,1478897335.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:55.136Z,1478897335.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:55.446Z,1478897335.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:55.846Z,1478897335.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:55.932Z,1478897335.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:56.244Z,1478897336.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:56.645Z,1478897336.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:56.729Z,1478897336.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:57.037Z,1478897337.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:57.156Z,1478897337.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:57.473Z,1478897337.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:57.841Z,1478897337.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:57.952Z,1478897337.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:58.238Z,1478897338.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:58.645Z,1478897338.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:58.748Z,1478897338.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:59.042Z,1478897339.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:59.447Z,1478897339.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:48:59.504Z,1478897339.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:48:59.847Z,1478897339.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:00.240Z,1478897340.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:00.300Z,1478897340.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:00.653Z,1478897340.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:01.088Z,1478897341.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:01.096Z,1478897341.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:01.448Z,1478897341.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:01.508Z,1478897341.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:01.844Z,1478897341.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:02.243Z,1478897342.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:02.304Z,1478897342.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:02.763Z,1478897342.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:03.035Z,1478897343.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:03.072Z,1478897343.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:03.469Z,1478897343.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:03.835Z,1478897343.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:03.868Z,1478897343.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:04.273Z,1478897344.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:04.664Z,1478897344.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:04.686Z,1478897344.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:05.043Z,1478897345.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:05.072Z,1478897345.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:05.438Z,1478897345.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:05.841Z,1478897345.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:05.900Z,1478897345.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:06.249Z,1478897346.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:06.682Z,1478897346.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:06.696Z,1478897346.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:07.045Z,1478897347.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:07.104Z,1478897347.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:07.448Z,1478897347.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:07.840Z,1478897347.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:07.900Z,1478897347.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:08.247Z,1478897348.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:08.696Z,1478897348.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:08.706Z,1478897348.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:09.038Z,1478897349.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:09.104Z,1478897349.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:09.449Z,1478897349.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:09.846Z,1478897349.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:09.900Z,1478897349.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:10.237Z,1478897350.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:10.644Z,1478897350.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:10.697Z,1478897350.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:11.054Z,1478897351.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:11.128Z,1478897351.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:11.428Z,1478897351.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:11.833Z,1478897351.833 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:11.833Z,1478897351.833 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 299
2016-11-11T20:49:11.833Z,1478897351.833 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:49:11.860Z,1478897351.861 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:11.861Z,1478897351.861 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 299
2016-11-11T20:49:11.861Z,1478897351.861 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:49:11.868Z,1478897351.868 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:11.868Z,1478897351.868 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 299
2016-11-11T20:49:11.868Z,1478897351.868 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:49:11.913Z,1478897351.913 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:49:11.913Z,1478897351.913 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:49:11.913Z,1478897351.913 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:49:11.924Z,1478897351.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:12.298Z,1478897352.298 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:49:12.298Z,1478897352.298 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 299
2016-11-11T20:49:12.299Z,1478897352.299 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:49:12.299Z,1478897352.299 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 299
2016-11-11T20:49:12.300Z,1478897352.300 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:49:12.300Z,1478897352.300 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 299
2016-11-11T20:49:12.646Z,1478897352.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:49:12.647Z,1478897352.647 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:49:12.651Z,1478897352.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:49:12.660Z,1478897352.661 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:49:12.661Z,1478897352.661 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:49:12.661Z,1478897352.661 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:49:12.662Z,1478897352.662 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:49:12.662Z,1478897352.662 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:49:12.663Z,1478897352.663 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:49:12.720Z,1478897352.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:13.098Z,1478897353.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:13.453Z,1478897353.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:13.476Z,1478897353.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:13.852Z,1478897353.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:14.242Z,1478897354.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:14.272Z,1478897354.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:14.637Z,1478897354.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:15.068Z,1478897355.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:15.110Z,1478897355.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:15.454Z,1478897355.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:15.484Z,1478897355.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:15.849Z,1478897355.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:16.240Z,1478897356.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:16.280Z,1478897356.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:16.742Z,1478897356.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:17.052Z,1478897357.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:17.848Z,1478897357.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:18.644Z,1478897358.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:19.052Z,1478897359.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:19.849Z,1478897359.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:20.115Z,1478897360.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:20.261Z,1478897360.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:20.644Z,1478897360.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:20.655Z,1478897360.655 [PNI_TCM](ERROR): CRC does not match. Expected:0x13944 got:0x48987
2016-11-11T20:49:20.706Z,1478897360.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:21.052Z,1478897361.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:21.057Z,1478897361.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:21.461Z,1478897361.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:21.848Z,1478897361.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:21.865Z,1478897361.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:22.254Z,1478897362.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:22.644Z,1478897362.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:22.678Z,1478897362.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:23.057Z,1478897363.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:23.060Z,1478897363.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:23.463Z,1478897363.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:23.856Z,1478897363.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:23.839Z,1478897363.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:24.260Z,1478897364.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:24.652Z,1478897364.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:24.697Z,1478897364.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:25.053Z,1478897365.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:25.096Z,1478897365.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:25.447Z,1478897365.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:25.853Z,1478897365.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:25.892Z,1478897365.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:26.243Z,1478897366.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:26.655Z,1478897366.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:26.688Z,1478897366.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:27.107Z,1478897367.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:27.457Z,1478897367.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:27.468Z,1478897367.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:27.844Z,1478897367.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:28.239Z,1478897368.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:28.264Z,1478897368.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:28.645Z,1478897368.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:29.060Z,1478897369.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:29.100Z,1478897369.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:29.448Z,1478897369.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:29.856Z,1478897369.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:29.861Z,1478897369.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:30.252Z,1478897370.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:30.652Z,1478897370.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:30.672Z,1478897370.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:31.050Z,1478897371.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:31.060Z,1478897371.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:31.453Z,1478897371.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:31.854Z,1478897371.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:31.856Z,1478897371.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:32.247Z,1478897372.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:32.652Z,1478897372.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:32.669Z,1478897372.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:33.058Z,1478897373.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:33.060Z,1478897373.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:33.482Z,1478897373.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:33.856Z,1478897373.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:33.918Z,1478897373.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:34.243Z,1478897374.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:34.652Z,1478897374.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:34.674Z,1478897374.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:35.060Z,1478897375.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:35.084Z,1478897375.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:35.457Z,1478897375.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:35.856Z,1478897375.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:35.884Z,1478897375.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:36.258Z,1478897376.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:36.650Z,1478897376.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:36.652Z,1478897376.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:37.042Z,1478897377.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:37.060Z,1478897377.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:37.449Z,1478897377.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:37.853Z,1478897377.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:37.856Z,1478897377.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:38.242Z,1478897378.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:38.652Z,1478897378.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:38.682Z,1478897378.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:39.042Z,1478897379.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:39.096Z,1478897379.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:39.444Z,1478897379.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:39.843Z,1478897379.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:39.892Z,1478897379.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:40.241Z,1478897380.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:40.644Z,1478897380.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:40.688Z,1478897380.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:41.113Z,1478897381.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:41.432Z,1478897381.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:41.437Z,1478897381.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:41.865Z,1478897381.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:42.228Z,1478897382.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:42.235Z,1478897382.235 [PNI_TCM](ERROR): CRC does not match. Expected:0x6210 got:0x16875
2016-11-11T20:49:42.273Z,1478897382.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:42.652Z,1478897382.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:43.025Z,1478897383.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:43.128Z,1478897383.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:43.444Z,1478897383.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:43.450Z,1478897383.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:43.852Z,1478897383.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:44.240Z,1478897384.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:44.246Z,1478897384.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:44.655Z,1478897384.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:44.964Z,1478897384.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:45.045Z,1478897385.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:45.443Z,1478897385.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:45.760Z,1478897385.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:45.846Z,1478897385.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:46.249Z,1478897386.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:46.561Z,1478897386.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:46.662Z,1478897386.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:46.972Z,1478897386.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:47.057Z,1478897387.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:47.452Z,1478897387.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:47.768Z,1478897387.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:47.840Z,1478897387.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:48.278Z,1478897388.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:48.565Z,1478897388.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:48.682Z,1478897388.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:48.976Z,1478897388.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:49.045Z,1478897389.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:49.473Z,1478897389.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:49.772Z,1478897389.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:49.849Z,1478897389.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:50.282Z,1478897390.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:50.577Z,1478897390.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:50.682Z,1478897390.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:50.984Z,1478897390.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:51.049Z,1478897391.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:51.446Z,1478897391.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:51.780Z,1478897391.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:51.841Z,1478897391.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:52.257Z,1478897392.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:52.577Z,1478897392.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:52.686Z,1478897392.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:53.041Z,1478897393.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:53.084Z,1478897393.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:53.468Z,1478897393.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:53.832Z,1478897393.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:53.880Z,1478897393.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:54.245Z,1478897394.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:54.646Z,1478897394.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:54.676Z,1478897394.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:55.098Z,1478897395.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:55.428Z,1478897395.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:55.445Z,1478897395.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:55.839Z,1478897395.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:56.224Z,1478897396.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:56.242Z,1478897396.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:56.649Z,1478897396.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:57.021Z,1478897397.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:57.086Z,1478897397.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:57.442Z,1478897397.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:57.444Z,1478897397.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:57.841Z,1478897397.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:58.240Z,1478897398.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:58.252Z,1478897398.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:58.645Z,1478897398.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:58.944Z,1478897398.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:59.047Z,1478897399.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:59.453Z,1478897399.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:49:59.740Z,1478897399.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:49:59.842Z,1478897399.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:00.245Z,1478897400.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:00.537Z,1478897400.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:00.649Z,1478897400.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:00.948Z,1478897400.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:01.049Z,1478897401.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:01.448Z,1478897401.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:01.744Z,1478897401.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:01.845Z,1478897401.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:02.245Z,1478897402.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:02.542Z,1478897402.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:02.714Z,1478897402.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:02.964Z,1478897402.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:03.069Z,1478897403.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:03.440Z,1478897403.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:03.760Z,1478897403.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:03.870Z,1478897403.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:04.240Z,1478897404.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:04.556Z,1478897404.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:04.673Z,1478897404.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:04.968Z,1478897404.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:05.074Z,1478897405.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:05.450Z,1478897405.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:05.764Z,1478897405.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:05.840Z,1478897405.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:06.239Z,1478897406.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:06.561Z,1478897406.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:06.674Z,1478897406.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:07.039Z,1478897407.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:07.092Z,1478897407.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:07.445Z,1478897407.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:07.848Z,1478897407.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:07.888Z,1478897407.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:08.257Z,1478897408.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:08.651Z,1478897408.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:08.684Z,1478897408.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:09.089Z,1478897409.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:09.406Z,1478897409.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:09.446Z,1478897409.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:09.859Z,1478897409.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:10.200Z,1478897410.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:10.257Z,1478897410.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:10.637Z,1478897410.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:10.996Z,1478897410.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:11.093Z,1478897411.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:11.408Z,1478897411.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:11.442Z,1478897411.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:11.840Z,1478897411.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:12.204Z,1478897412.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:12.246Z,1478897412.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:12.639Z,1478897412.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:12.920Z,1478897412.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:13.046Z,1478897413.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:13.449Z,1478897413.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:13.717Z,1478897413.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:13.853Z,1478897413.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:14.241Z,1478897414.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:14.513Z,1478897414.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:14.647Z,1478897414.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:14.928Z,1478897414.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:15.050Z,1478897415.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:15.442Z,1478897415.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:15.724Z,1478897415.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:15.840Z,1478897415.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:16.247Z,1478897416.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:16.256Z,1478897416.256 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T20:50:16.256Z,1478897416.256 [Default:CheckIn:C.Wait] Stopped
2016-11-11T20:50:16.256Z,1478897416.256 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T20:50:16.256Z,1478897416.256 [Default:CheckIn:D] Running Loop=1
2016-11-11T20:50:16.521Z,1478897416.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:16.673Z,1478897416.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:16.708Z,1478897416.708 [Default:CheckIn:D] Stopped
2016-11-11T20:50:16.708Z,1478897416.708 [Default:CheckIn:E] Running Loop=1
2016-11-11T20:50:16.940Z,1478897416.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:17.736Z,1478897417.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:18.533Z,1478897418.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:18.944Z,1478897418.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:19.740Z,1478897419.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:20.218Z,1478897420.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:20.264Z,1478897420.263 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 960.256641 min 
2016-11-11T20:50:20.264Z,1478897420.264 [Default:CheckIn:E] Stopped
2016-11-11T20:50:20.264Z,1478897420.264 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T20:50:20.264Z,1478897420.264 [Default:CheckIn] Stopped
2016-11-11T20:50:20.264Z,1478897420.264 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T20:50:20.264Z,1478897420.264 [Default:CheckIn](INFO): Running loop #93
2016-11-11T20:50:20.264Z,1478897420.264 [Default:CheckIn] Running Loop=93
2016-11-11T20:50:20.265Z,1478897420.265 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T20:50:20.265Z,1478897420.265 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T20:50:20.361Z,1478897420.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:20.536Z,1478897420.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:20.701Z,1478897420.701 [NAL9602](INFO): Powering up
2016-11-11T20:50:20.781Z,1478897420.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:21.012Z,1478897421.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:21.127Z,1478897421.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:21.567Z,1478897421.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:21.808Z,1478897421.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:21.966Z,1478897421.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:22.331Z,1478897422.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:22.604Z,1478897422.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:22.732Z,1478897422.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:23.131Z,1478897423.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:23.388Z,1478897423.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:23.537Z,1478897423.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:23.932Z,1478897423.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:24.184Z,1478897424.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:24.335Z,1478897424.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:24.738Z,1478897424.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:24.980Z,1478897424.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:25.132Z,1478897425.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:25.392Z,1478897425.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:25.545Z,1478897425.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:25.942Z,1478897425.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:26.188Z,1478897426.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:26.333Z,1478897426.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:26.741Z,1478897426.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:26.896Z,1478897426.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:27.142Z,1478897427.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:27.534Z,1478897427.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:27.692Z,1478897427.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:27.941Z,1478897427.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:28.342Z,1478897428.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:28.489Z,1478897428.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:28.732Z,1478897428.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:28.900Z,1478897428.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:29.141Z,1478897429.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:29.533Z,1478897429.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:29.696Z,1478897429.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:29.933Z,1478897429.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:30.341Z,1478897430.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:30.493Z,1478897430.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:30.742Z,1478897430.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:30.904Z,1478897430.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:31.137Z,1478897431.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:31.553Z,1478897431.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:31.700Z,1478897431.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:31.893Z,1478897431.893 [NAL9602](INFO): NAL9602 initialized
2016-11-11T20:50:31.949Z,1478897431.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:32.338Z,1478897432.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:32.497Z,1478897432.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:32.754Z,1478897432.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:32.908Z,1478897432.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:33.153Z,1478897433.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:33.554Z,1478897433.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:33.704Z,1478897433.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:33.985Z,1478897433.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:34.329Z,1478897434.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:34.500Z,1478897434.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:34.814Z,1478897434.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:35.004Z,1478897435.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:35.137Z,1478897435.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:35.569Z,1478897435.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:35.800Z,1478897435.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:35.971Z,1478897435.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:36.331Z,1478897436.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:36.596Z,1478897436.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:36.740Z,1478897436.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:37.137Z,1478897437.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:37.348Z,1478897437.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:37.535Z,1478897437.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:37.937Z,1478897437.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:38.144Z,1478897438.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:38.337Z,1478897438.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:38.742Z,1478897438.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:38.941Z,1478897438.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:39.134Z,1478897439.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:39.372Z,1478897439.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:39.541Z,1478897439.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:39.934Z,1478897439.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:40.168Z,1478897440.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:40.341Z,1478897440.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:40.734Z,1478897440.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:40.876Z,1478897440.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:41.137Z,1478897441.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:41.533Z,1478897441.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:41.672Z,1478897441.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:41.945Z,1478897441.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:42.334Z,1478897442.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:42.469Z,1478897442.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:42.742Z,1478897442.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:42.884Z,1478897442.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:43.149Z,1478897443.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:43.534Z,1478897443.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:43.680Z,1478897443.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:43.944Z,1478897443.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:44.339Z,1478897444.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:44.477Z,1478897444.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:44.741Z,1478897444.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:44.888Z,1478897444.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:45.137Z,1478897445.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:45.539Z,1478897445.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:45.684Z,1478897445.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:45.944Z,1478897445.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:46.337Z,1478897446.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:46.481Z,1478897446.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:46.743Z,1478897446.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:46.892Z,1478897446.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:47.144Z,1478897447.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:47.549Z,1478897447.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:47.688Z,1478897447.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:47.977Z,1478897447.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:48.337Z,1478897448.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:48.484Z,1478897448.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:48.735Z,1478897448.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:48.980Z,1478897448.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:49.161Z,1478897449.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:49.536Z,1478897449.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:49.776Z,1478897449.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:49.966Z,1478897449.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:50.369Z,1478897450.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:50.572Z,1478897450.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:50.737Z,1478897450.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:51.137Z,1478897451.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:51.328Z,1478897451.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:51.541Z,1478897451.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:51.981Z,1478897451.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:52.124Z,1478897452.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:52.337Z,1478897452.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:52.741Z,1478897452.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:52.921Z,1478897452.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:53.132Z,1478897453.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:53.332Z,1478897453.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:53.545Z,1478897453.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:53.942Z,1478897453.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:54.128Z,1478897454.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:54.340Z,1478897454.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:54.741Z,1478897454.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:54.852Z,1478897454.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:55.139Z,1478897455.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:55.533Z,1478897455.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:55.648Z,1478897455.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:55.944Z,1478897455.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:56.345Z,1478897456.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:56.445Z,1478897456.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:56.745Z,1478897456.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:56.856Z,1478897456.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:57.145Z,1478897457.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:57.545Z,1478897457.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:57.652Z,1478897457.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:57.947Z,1478897457.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:58.335Z,1478897458.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:58.449Z,1478897458.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:58.729Z,1478897458.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:58.860Z,1478897458.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:59.130Z,1478897459.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:59.528Z,1478897459.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:50:59.656Z,1478897459.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:50:59.932Z,1478897459.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:00.336Z,1478897460.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:00.453Z,1478897460.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:00.731Z,1478897460.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:00.868Z,1478897460.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:01.144Z,1478897461.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:01.542Z,1478897461.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:01.664Z,1478897461.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:01.937Z,1478897461.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:02.366Z,1478897462.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:02.460Z,1478897462.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:02.761Z,1478897462.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:02.950Z,1478897462.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:03.151Z,1478897463.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:03.525Z,1478897463.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:03.744Z,1478897463.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:03.893Z,1478897463.893 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-11T20:51:03.971Z,1478897463.971 [NAL9602](FAULT): received: 
+CSQ:0

OK9, 2, 0, 0, 0

OK
2016-11-11T20:51:03.971Z,1478897463.971 [NAL9602] Data Fault, FailCount= 1
2016-11-11T20:51:03.971Z,1478897463.971 [NAL9602](ERROR): Data Fault
2016-11-11T20:51:04.041Z,1478897464.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:04.083Z,1478897464.083 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T20:51:04.292Z,1478897464.293 [NAL9602](INFO): Powering down
2016-11-11T20:51:04.345Z,1478897464.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:04.540Z,1478897464.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:04.770Z,1478897464.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:05.173Z,1478897465.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:05.192Z,1478897465.192 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T20:51:05.192Z,1478897465.193 [NAL9602] No Fault, FailCount= 1
2016-11-11T20:51:05.310Z,1478897465.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:05.531Z,1478897465.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:05.932Z,1478897465.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:06.104Z,1478897466.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:06.332Z,1478897466.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:06.732Z,1478897466.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:06.901Z,1478897466.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:07.137Z,1478897467.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:07.312Z,1478897467.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:07.535Z,1478897467.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:07.943Z,1478897467.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:08.108Z,1478897468.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:08.332Z,1478897468.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:08.744Z,1478897468.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:08.840Z,1478897468.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:09.144Z,1478897469.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:09.493Z,1478897469.493 [NAL9602](INFO): Powering up NAL9602
2016-11-11T20:51:09.541Z,1478897469.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:09.636Z,1478897469.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:09.929Z,1478897469.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:10.324Z,1478897470.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:10.433Z,1478897470.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:10.731Z,1478897470.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:10.844Z,1478897470.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:11.141Z,1478897471.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:11.537Z,1478897471.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:11.640Z,1478897471.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:11.931Z,1478897471.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:12.340Z,1478897472.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:12.437Z,1478897472.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:12.740Z,1478897472.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:12.848Z,1478897472.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:13.144Z,1478897473.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:13.543Z,1478897473.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:13.644Z,1478897473.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:13.944Z,1478897473.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:14.344Z,1478897474.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:14.440Z,1478897474.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:14.738Z,1478897474.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:14.852Z,1478897474.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:15.130Z,1478897475.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:15.536Z,1478897475.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:15.648Z,1478897475.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:15.940Z,1478897475.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:16.341Z,1478897476.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:16.444Z,1478897476.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:16.729Z,1478897476.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:16.928Z,1478897476.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:17.724Z,1478897477.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:18.520Z,1478897478.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:19.300Z,1478897479.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:20.096Z,1478897480.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:20.137Z,1478897480.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:20.272Z,1478897480.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:20.601Z,1478897480.601 [NAL9602](INFO): NAL9602 initialized
2016-11-11T20:51:20.633Z,1478897480.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:20.893Z,1478897480.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:21.073Z,1478897481.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:21.308Z,1478897481.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:21.443Z,1478897481.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:21.873Z,1478897481.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:22.106Z,1478897482.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:22.264Z,1478897482.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:22.637Z,1478897482.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:22.812Z,1478897482.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:23.037Z,1478897483.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:23.437Z,1478897483.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:23.609Z,1478897483.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:23.857Z,1478897483.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:24.248Z,1478897484.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:24.405Z,1478897484.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:24.645Z,1478897484.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:24.816Z,1478897484.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:25.042Z,1478897485.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:25.440Z,1478897485.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:25.612Z,1478897485.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:25.844Z,1478897485.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:26.236Z,1478897486.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:26.421Z,1478897486.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:26.645Z,1478897486.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:26.836Z,1478897486.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:27.044Z,1478897487.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:27.441Z,1478897487.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:27.632Z,1478897487.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:27.849Z,1478897487.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:28.253Z,1478897488.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:28.429Z,1478897488.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:28.656Z,1478897488.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:28.844Z,1478897488.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:29.053Z,1478897489.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:29.433Z,1478897489.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:29.640Z,1478897489.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:29.833Z,1478897489.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:30.237Z,1478897490.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:30.436Z,1478897490.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:30.637Z,1478897490.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:30.912Z,1478897490.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:31.032Z,1478897491.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:31.436Z,1478897491.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:31.710Z,1478897491.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:31.831Z,1478897491.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:32.233Z,1478897492.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:32.504Z,1478897492.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:32.632Z,1478897492.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:33.045Z,1478897493.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:33.280Z,1478897493.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:33.437Z,1478897493.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:33.836Z,1478897493.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:34.078Z,1478897494.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:34.289Z,1478897494.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:34.624Z,1478897494.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:34.873Z,1478897494.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:35.037Z,1478897495.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:35.284Z,1478897495.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:35.467Z,1478897495.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:35.832Z,1478897495.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:36.080Z,1478897496.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:36.255Z,1478897496.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:36.669Z,1478897496.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:36.792Z,1478897496.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:37.032Z,1478897497.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:37.439Z,1478897497.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:37.588Z,1478897497.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:37.840Z,1478897497.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:38.243Z,1478897498.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:38.384Z,1478897498.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:38.645Z,1478897498.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:38.796Z,1478897498.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:39.046Z,1478897499.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:39.449Z,1478897499.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:39.592Z,1478897499.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:39.839Z,1478897499.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:40.265Z,1478897500.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:40.388Z,1478897500.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:40.673Z,1478897500.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:40.804Z,1478897500.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:41.038Z,1478897501.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:41.449Z,1478897501.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:41.600Z,1478897501.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:41.854Z,1478897501.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:42.262Z,1478897502.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:42.397Z,1478897502.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:42.672Z,1478897502.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:42.809Z,1478897502.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:43.050Z,1478897503.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:43.441Z,1478897503.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:43.604Z,1478897503.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:43.855Z,1478897503.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:44.242Z,1478897504.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:44.401Z,1478897504.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:44.652Z,1478897504.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:45.047Z,1478897505.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:45.196Z,1478897505.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:45.434Z,1478897505.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:45.840Z,1478897505.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:45.992Z,1478897505.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:46.254Z,1478897506.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:46.647Z,1478897506.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:46.788Z,1478897506.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:47.048Z,1478897507.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:47.446Z,1478897507.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:47.584Z,1478897507.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:47.829Z,1478897507.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:48.232Z,1478897508.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:48.380Z,1478897508.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:48.649Z,1478897508.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:49.119Z,1478897509.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:49.176Z,1478897509.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:49.433Z,1478897509.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:49.829Z,1478897509.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:49.972Z,1478897509.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:50.257Z,1478897510.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:50.633Z,1478897510.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:50.768Z,1478897510.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:51.065Z,1478897511.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:51.439Z,1478897511.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:51.564Z,1478897511.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:51.874Z,1478897511.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:52.239Z,1478897512.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:52.360Z,1478897512.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:52.629Z,1478897512.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:53.025Z,1478897513.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:53.156Z,1478897513.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:53.428Z,1478897513.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:53.824Z,1478897513.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:53.952Z,1478897513.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:54.233Z,1478897514.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:54.628Z,1478897514.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:54.748Z,1478897514.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:55.028Z,1478897515.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:55.540Z,1478897515.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:55.544Z,1478897515.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:55.846Z,1478897515.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:55.952Z,1478897515.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:56.258Z,1478897516.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:56.650Z,1478897516.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:56.748Z,1478897516.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:57.070Z,1478897517.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:57.156Z,1478897517.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:57.453Z,1478897517.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:57.564Z,1478897517.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:57.857Z,1478897517.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:57.972Z,1478897517.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:58.226Z,1478897518.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:58.380Z,1478897518.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:58.654Z,1478897518.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:58.792Z,1478897518.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:59.050Z,1478897519.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:59.200Z,1478897519.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:59.437Z,1478897519.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:51:59.632Z,1478897519.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:51:59.857Z,1478897519.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:00.237Z,1478897520.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:00.428Z,1478897520.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:00.665Z,1478897520.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:01.055Z,1478897521.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:01.216Z,1478897521.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:01.464Z,1478897521.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:01.873Z,1478897521.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:02.012Z,1478897522.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:02.266Z,1478897522.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:02.633Z,1478897522.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:02.809Z,1478897522.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:03.065Z,1478897523.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:03.220Z,1478897523.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:03.454Z,1478897523.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:03.916Z,1478897523.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:04.016Z,1478897524.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:04.272Z,1478897524.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:04.685Z,1478897524.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:04.744Z,1478897524.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:05.046Z,1478897525.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:05.453Z,1478897525.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:05.540Z,1478897525.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:05.854Z,1478897525.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:06.254Z,1478897526.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:06.336Z,1478897526.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:06.666Z,1478897526.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:06.748Z,1478897526.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:07.034Z,1478897527.034 [BPC1](ERROR): Failed to receive battery data
2016-11-11T20:52:07.034Z,1478897527.034 [BPC1] Communications Fault, FailCount= 1
2016-11-11T20:52:07.034Z,1478897527.034 [BPC1](ERROR): Communications Fault
2016-11-11T20:52:07.071Z,1478897527.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:07.150Z,1478897527.150 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T20:52:07.485Z,1478897527.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:07.544Z,1478897527.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:07.849Z,1478897527.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:08.266Z,1478897528.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:08.341Z,1478897528.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:08.398Z,1478897528.398 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:52:08.398Z,1478897528.398 [BPC1] No Fault, FailCount= 1
2016-11-11T20:52:08.741Z,1478897528.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:08.752Z,1478897528.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:09.073Z,1478897529.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:09.426Z,1478897529.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:09.548Z,1478897529.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:09.834Z,1478897529.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:10.262Z,1478897530.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:10.346Z,1478897530.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:10.642Z,1478897530.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:10.760Z,1478897530.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:11.051Z,1478897531.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:11.457Z,1478897531.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:11.558Z,1478897531.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:11.850Z,1478897531.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:12.262Z,1478897532.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:12.352Z,1478897532.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:12.665Z,1478897532.665 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:12.665Z,1478897532.665 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 300
2016-11-11T20:52:12.666Z,1478897532.666 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:52:12.672Z,1478897532.672 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:12.672Z,1478897532.672 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 300
2016-11-11T20:52:12.673Z,1478897532.672 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:52:12.684Z,1478897532.684 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:12.684Z,1478897532.684 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 300
2016-11-11T20:52:12.684Z,1478897532.684 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:52:12.780Z,1478897532.780 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:52:12.781Z,1478897532.781 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:52:12.781Z,1478897532.781 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:52:12.844Z,1478897532.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:13.116Z,1478897533.115 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:52:13.116Z,1478897533.116 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 300
2016-11-11T20:52:13.116Z,1478897533.116 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:52:13.116Z,1478897533.116 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 300
2016-11-11T20:52:13.117Z,1478897533.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:52:13.117Z,1478897533.117 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 300
2016-11-11T20:52:13.433Z,1478897533.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:52:13.433Z,1478897533.433 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:52:13.434Z,1478897533.434 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:52:13.447Z,1478897533.447 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:52:13.448Z,1478897533.448 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:52:13.448Z,1478897533.448 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:52:13.449Z,1478897533.448 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:52:13.449Z,1478897533.449 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:52:13.449Z,1478897533.449 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:52:13.640Z,1478897533.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:13.853Z,1478897533.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:14.273Z,1478897534.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:14.436Z,1478897534.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:14.656Z,1478897534.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:15.054Z,1478897535.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:15.204Z,1478897535.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:15.450Z,1478897535.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:15.853Z,1478897535.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:16.001Z,1478897536.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:16.255Z,1478897536.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:16.650Z,1478897536.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:16.797Z,1478897536.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:17.058Z,1478897537.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:17.208Z,1478897537.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:18.004Z,1478897538.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:18.732Z,1478897538.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:19.528Z,1478897539.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:20.325Z,1478897540.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:20.736Z,1478897540.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:21.532Z,1478897541.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:22.328Z,1478897542.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:22.740Z,1478897542.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:23.536Z,1478897543.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:23.885Z,1478897543.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:24.081Z,1478897544.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:24.333Z,1478897544.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:24.422Z,1478897544.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:24.744Z,1478897544.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:24.830Z,1478897544.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:25.226Z,1478897545.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:25.540Z,1478897545.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:25.629Z,1478897545.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:26.033Z,1478897546.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:26.336Z,1478897546.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:26.510Z,1478897546.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:26.852Z,1478897546.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:26.878Z,1478897546.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:27.201Z,1478897547.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:27.597Z,1478897547.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:27.648Z,1478897547.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:28.006Z,1478897548.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:28.397Z,1478897548.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:28.444Z,1478897548.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:28.837Z,1478897548.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:29.213Z,1478897549.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:29.220Z,1478897549.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:29.611Z,1478897549.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:30.010Z,1478897550.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:30.016Z,1478897550.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:30.403Z,1478897550.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:30.812Z,1478897550.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:30.832Z,1478897550.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:31.205Z,1478897551.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:31.224Z,1478897551.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:31.615Z,1478897551.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:31.988Z,1478897551.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:32.020Z,1478897552.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:32.398Z,1478897552.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:32.700Z,1478897552.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:32.797Z,1478897552.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:33.196Z,1478897553.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:33.496Z,1478897553.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:33.604Z,1478897553.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:34.002Z,1478897554.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:34.293Z,1478897554.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:34.413Z,1478897554.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:34.704Z,1478897554.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:34.809Z,1478897554.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:35.213Z,1478897555.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:35.500Z,1478897555.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:35.606Z,1478897555.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:36.002Z,1478897556.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:36.297Z,1478897556.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:36.405Z,1478897556.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:36.708Z,1478897556.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:36.814Z,1478897556.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:37.209Z,1478897557.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:37.504Z,1478897557.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:37.632Z,1478897557.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:37.992Z,1478897557.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:38.301Z,1478897558.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:38.415Z,1478897558.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:38.716Z,1478897558.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:38.802Z,1478897558.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:39.249Z,1478897559.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:39.512Z,1478897559.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:39.619Z,1478897559.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:40.001Z,1478897560.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:40.308Z,1478897560.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:40.486Z,1478897560.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:40.818Z,1478897560.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:40.820Z,1478897560.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:41.261Z,1478897561.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:41.616Z,1478897561.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:41.629Z,1478897561.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:41.997Z,1478897561.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:42.401Z,1478897562.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:42.412Z,1478897562.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:42.840Z,1478897562.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:43.162Z,1478897563.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:43.199Z,1478897563.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:43.603Z,1478897563.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:43.956Z,1478897563.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:44.002Z,1478897564.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:44.406Z,1478897564.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:44.752Z,1478897564.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:44.825Z,1478897564.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:45.164Z,1478897565.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:45.209Z,1478897565.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:45.601Z,1478897565.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:45.960Z,1478897565.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:46.007Z,1478897566.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:46.398Z,1478897566.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:46.682Z,1478897566.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:46.798Z,1478897566.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:47.212Z,1478897567.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:47.476Z,1478897567.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:47.609Z,1478897567.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:48.110Z,1478897568.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:48.273Z,1478897568.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:48.413Z,1478897568.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:48.684Z,1478897568.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:48.810Z,1478897568.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:49.208Z,1478897569.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:49.480Z,1478897569.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:49.620Z,1478897569.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:50.021Z,1478897570.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:50.276Z,1478897570.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:50.409Z,1478897570.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:50.856Z,1478897570.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:51.072Z,1478897571.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:51.227Z,1478897571.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:51.480Z,1478897571.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:51.613Z,1478897571.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:51.994Z,1478897571.994 [BPC1](ERROR): Failed to parse message.
2016-11-11T20:52:51.994Z,1478897571.994 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T20:52:51.994Z,1478897571.994 [BPC1] Data Fault, FailCount= 1
2016-11-11T20:52:51.995Z,1478897571.995 [BPC1](ERROR): Data Fault
2016-11-11T20:52:52.038Z,1478897572.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:52.075Z,1478897572.075 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T20:52:52.285Z,1478897572.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:52.394Z,1478897572.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:52.696Z,1478897572.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:52.798Z,1478897572.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:53.194Z,1478897573.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:53.235Z,1478897573.236 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:52:53.236Z,1478897573.236 [BPC1] No Fault, FailCount= 1
2016-11-11T20:52:53.492Z,1478897573.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:53.658Z,1478897573.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:54.036Z,1478897574.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:54.288Z,1478897574.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:54.449Z,1478897574.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:54.808Z,1478897574.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:54.824Z,1478897574.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:55.198Z,1478897575.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:55.605Z,1478897575.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:55.620Z,1478897575.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:55.996Z,1478897575.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:56.403Z,1478897576.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:56.416Z,1478897576.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:56.814Z,1478897576.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:57.140Z,1478897577.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:57.205Z,1478897577.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:57.601Z,1478897577.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:57.936Z,1478897577.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:58.021Z,1478897578.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:58.421Z,1478897578.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:58.743Z,1478897578.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:58.820Z,1478897578.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:59.168Z,1478897579.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:59.221Z,1478897579.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:59.614Z,1478897579.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:52:59.965Z,1478897579.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:52:59.993Z,1478897579.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:00.425Z,1478897580.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:00.660Z,1478897580.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:00.797Z,1478897580.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:01.194Z,1478897581.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:01.456Z,1478897581.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:01.606Z,1478897581.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:01.997Z,1478897581.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:02.258Z,1478897582.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:02.409Z,1478897582.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:02.688Z,1478897582.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:02.797Z,1478897582.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:03.217Z,1478897583.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:03.484Z,1478897583.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:03.607Z,1478897583.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:04.010Z,1478897584.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:04.281Z,1478897584.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:04.408Z,1478897584.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:04.692Z,1478897584.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:04.805Z,1478897584.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:05.229Z,1478897585.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:05.489Z,1478897585.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:05.609Z,1478897585.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:06.025Z,1478897586.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:06.284Z,1478897586.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:06.414Z,1478897586.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:06.692Z,1478897586.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:06.797Z,1478897586.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:07.230Z,1478897587.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:07.488Z,1478897587.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:07.606Z,1478897587.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:08.045Z,1478897588.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:08.285Z,1478897588.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:08.457Z,1478897588.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:08.788Z,1478897588.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:08.818Z,1478897588.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:09.211Z,1478897589.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:09.584Z,1478897589.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:09.609Z,1478897589.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:09.997Z,1478897589.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:10.380Z,1478897590.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:10.392Z,1478897590.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:10.797Z,1478897590.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:11.108Z,1478897591.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:11.201Z,1478897591.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:11.596Z,1478897591.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:11.904Z,1478897591.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:11.997Z,1478897591.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:12.404Z,1478897592.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:12.701Z,1478897592.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:12.807Z,1478897592.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:13.112Z,1478897593.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:13.211Z,1478897593.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:13.610Z,1478897593.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:13.908Z,1478897593.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:14.011Z,1478897594.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:14.410Z,1478897594.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:14.636Z,1478897594.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:14.801Z,1478897594.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:15.205Z,1478897595.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:15.434Z,1478897595.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:15.604Z,1478897595.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:16.005Z,1478897596.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:16.229Z,1478897596.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:16.408Z,1478897596.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:16.640Z,1478897596.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:16.804Z,1478897596.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:17.209Z,1478897597.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:17.436Z,1478897597.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:18.235Z,1478897598.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:18.648Z,1478897598.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:19.444Z,1478897599.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:20.241Z,1478897600.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:20.652Z,1478897600.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:20.937Z,1478897600.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:21.076Z,1478897601.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:21.448Z,1478897601.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:21.486Z,1478897601.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:21.873Z,1478897601.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:22.244Z,1478897602.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:22.270Z,1478897602.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:22.723Z,1478897602.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:22.744Z,1478897602.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:23.044Z,1478897603.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:23.450Z,1478897603.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:23.540Z,1478897603.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:23.844Z,1478897603.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:24.249Z,1478897604.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:24.336Z,1478897604.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:24.683Z,1478897604.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:25.052Z,1478897605.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:25.112Z,1478897605.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:25.449Z,1478897605.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:25.848Z,1478897605.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:25.908Z,1478897605.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:26.266Z,1478897606.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:26.689Z,1478897606.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:26.704Z,1478897606.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:27.053Z,1478897607.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:27.116Z,1478897607.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:27.437Z,1478897607.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:27.834Z,1478897607.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:27.912Z,1478897607.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:28.289Z,1478897608.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:28.647Z,1478897608.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:28.664Z,1478897608.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:29.050Z,1478897609.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:29.426Z,1478897609.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:29.460Z,1478897609.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:29.829Z,1478897609.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:30.256Z,1478897610.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:30.281Z,1478897610.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:30.632Z,1478897610.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:30.668Z,1478897610.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:31.066Z,1478897611.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:31.464Z,1478897611.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:31.465Z,1478897611.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:31.865Z,1478897611.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:32.260Z,1478897612.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:32.289Z,1478897612.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:32.646Z,1478897612.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:32.668Z,1478897612.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:33.041Z,1478897613.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:33.464Z,1478897613.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:33.471Z,1478897613.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:33.848Z,1478897613.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:34.260Z,1478897614.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:34.283Z,1478897614.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:34.668Z,1478897614.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:34.682Z,1478897614.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:35.059Z,1478897615.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:35.464Z,1478897615.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:35.465Z,1478897615.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:35.905Z,1478897615.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:36.258Z,1478897616.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:36.260Z,1478897616.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:36.697Z,1478897616.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:36.724Z,1478897616.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:37.093Z,1478897617.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:37.457Z,1478897617.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:37.520Z,1478897617.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:37.840Z,1478897617.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:38.259Z,1478897618.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:38.316Z,1478897618.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:38.719Z,1478897618.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:39.052Z,1478897619.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:39.060Z,1478897619.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:39.504Z,1478897619.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:39.847Z,1478897619.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:39.856Z,1478897619.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:40.255Z,1478897620.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:40.654Z,1478897620.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:40.748Z,1478897620.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:41.065Z,1478897621.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:41.100Z,1478897621.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:41.477Z,1478897621.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:41.845Z,1478897621.845 [PNI_TCM](ERROR): CRC does not match. Expected:0x53961 got:0x175
2016-11-11T20:53:41.873Z,1478897621.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:41.900Z,1478897621.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:42.273Z,1478897622.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:42.584Z,1478897622.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:42.660Z,1478897622.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:43.057Z,1478897623.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:43.380Z,1478897623.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:43.452Z,1478897623.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:43.845Z,1478897623.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:44.177Z,1478897624.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:44.274Z,1478897624.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:44.592Z,1478897624.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:44.649Z,1478897624.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:45.052Z,1478897625.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:45.388Z,1478897625.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:45.449Z,1478897625.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:45.846Z,1478897625.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:46.196Z,1478897626.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:46.282Z,1478897626.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:46.612Z,1478897626.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:46.662Z,1478897626.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:47.047Z,1478897627.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:47.408Z,1478897627.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:47.460Z,1478897627.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:47.881Z,1478897627.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:48.204Z,1478897628.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:48.266Z,1478897628.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:48.612Z,1478897628.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:48.649Z,1478897628.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:49.085Z,1478897629.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:49.408Z,1478897629.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:49.445Z,1478897629.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:49.840Z,1478897629.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:50.204Z,1478897630.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:50.338Z,1478897630.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:50.648Z,1478897630.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:50.688Z,1478897630.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:51.076Z,1478897631.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:51.475Z,1478897631.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:51.484Z,1478897631.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:51.866Z,1478897631.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:52.265Z,1478897632.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:52.296Z,1478897632.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:52.750Z,1478897632.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:53.036Z,1478897633.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:53.065Z,1478897633.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:53.451Z,1478897633.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:53.832Z,1478897633.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:53.834Z,1478897633.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:54.260Z,1478897634.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:54.629Z,1478897634.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:54.674Z,1478897634.674 [PNI_TCM](ERROR): CRC does not match. Expected:0x37838 got:0x26344
2016-11-11T20:53:54.710Z,1478897634.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:55.051Z,1478897635.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:55.064Z,1478897635.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:55.454Z,1478897635.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:55.857Z,1478897635.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:55.860Z,1478897635.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:56.273Z,1478897636.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:56.564Z,1478897636.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:56.649Z,1478897636.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:57.064Z,1478897637.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:57.360Z,1478897637.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:57.474Z,1478897637.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:57.873Z,1478897637.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:58.157Z,1478897638.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:58.265Z,1478897638.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:58.568Z,1478897638.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:58.638Z,1478897638.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:59.053Z,1478897639.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:59.364Z,1478897639.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:53:59.438Z,1478897639.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:53:59.858Z,1478897639.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:00.161Z,1478897640.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:00.256Z,1478897640.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:00.572Z,1478897640.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:00.645Z,1478897640.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:01.041Z,1478897641.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:01.368Z,1478897641.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:01.453Z,1478897641.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:01.840Z,1478897641.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:02.165Z,1478897642.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:02.293Z,1478897642.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:02.576Z,1478897642.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:02.653Z,1478897642.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:03.090Z,1478897643.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:03.372Z,1478897643.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:03.451Z,1478897643.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:03.858Z,1478897643.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:04.168Z,1478897644.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:04.310Z,1478897644.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:04.655Z,1478897644.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:04.680Z,1478897644.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:05.029Z,1478897645.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:05.433Z,1478897645.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:05.476Z,1478897645.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:05.837Z,1478897645.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:06.236Z,1478897646.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:06.272Z,1478897646.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:06.677Z,1478897646.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:07.043Z,1478897647.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:07.068Z,1478897647.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:07.453Z,1478897647.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:07.851Z,1478897647.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:07.864Z,1478897647.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:08.248Z,1478897648.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:08.660Z,1478897648.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:08.689Z,1478897648.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:09.068Z,1478897649.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:09.073Z,1478897649.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:09.462Z,1478897649.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:09.845Z,1478897649.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:09.864Z,1478897649.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:10.236Z,1478897650.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:10.540Z,1478897650.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:10.639Z,1478897650.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:11.053Z,1478897651.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:11.336Z,1478897651.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:11.445Z,1478897651.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:11.838Z,1478897651.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:12.133Z,1478897652.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:12.249Z,1478897652.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:12.544Z,1478897652.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:12.660Z,1478897652.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:13.065Z,1478897653.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:13.340Z,1478897653.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:13.457Z,1478897653.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:13.859Z,1478897653.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:14.137Z,1478897654.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:14.266Z,1478897654.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:14.548Z,1478897654.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:14.689Z,1478897654.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:15.069Z,1478897655.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:15.344Z,1478897655.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:15.457Z,1478897655.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:15.849Z,1478897655.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:16.141Z,1478897656.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:16.249Z,1478897656.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:16.552Z,1478897656.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:16.685Z,1478897656.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:17.038Z,1478897657.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:17.348Z,1478897657.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:17.477Z,1478897657.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:18.144Z,1478897658.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:18.640Z,1478897658.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:19.436Z,1478897659.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:20.232Z,1478897660.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:20.897Z,1478897660.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:21.004Z,1478897661.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:21.025Z,1478897661.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:21.398Z,1478897661.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:21.769Z,1478897661.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:21.800Z,1478897661.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:22.174Z,1478897662.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:22.596Z,1478897662.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:22.670Z,1478897662.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:22.980Z,1478897662.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:23.008Z,1478897663.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:23.382Z,1478897663.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:23.773Z,1478897663.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:23.804Z,1478897663.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:24.209Z,1478897664.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:24.534Z,1478897664.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:24.587Z,1478897664.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:24.978Z,1478897664.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:25.328Z,1478897665.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:25.393Z,1478897665.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:25.772Z,1478897665.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:26.124Z,1478897666.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:26.226Z,1478897666.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:26.536Z,1478897666.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:26.574Z,1478897666.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:26.969Z,1478897666.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:27.332Z,1478897667.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:27.375Z,1478897667.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:27.797Z,1478897667.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:28.129Z,1478897668.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:28.228Z,1478897668.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:28.540Z,1478897668.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:28.578Z,1478897668.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:28.955Z,1478897668.955 [PNI_TCM](ERROR): CRC does not match. Expected:0x39374 got:0x64477
2016-11-11T20:54:28.997Z,1478897668.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:29.336Z,1478897669.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:29.396Z,1478897669.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:29.780Z,1478897669.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:30.134Z,1478897670.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:30.194Z,1478897670.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:30.576Z,1478897670.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:30.601Z,1478897670.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:30.981Z,1478897670.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:31.372Z,1478897671.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:31.426Z,1478897671.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:31.810Z,1478897671.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:32.168Z,1478897672.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:32.232Z,1478897672.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:32.613Z,1478897672.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:32.628Z,1478897672.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:32.973Z,1478897672.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:33.394Z,1478897673.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:33.424Z,1478897673.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:33.798Z,1478897673.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:34.177Z,1478897674.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:34.220Z,1478897674.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:34.645Z,1478897674.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:34.981Z,1478897674.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:35.016Z,1478897675.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:35.378Z,1478897675.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:35.777Z,1478897675.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:35.812Z,1478897675.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:36.189Z,1478897676.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:36.608Z,1478897676.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:36.640Z,1478897676.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:36.988Z,1478897676.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:37.016Z,1478897677.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:37.388Z,1478897677.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:37.758Z,1478897677.758 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2016-11-11T20:54:37.797Z,1478897677.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:37.812Z,1478897677.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:38.174Z,1478897678.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:38.500Z,1478897678.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:38.582Z,1478897678.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:38.973Z,1478897678.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:39.296Z,1478897679.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:39.372Z,1478897679.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:39.776Z,1478897679.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:40.093Z,1478897680.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:40.196Z,1478897680.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:40.504Z,1478897680.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:40.595Z,1478897680.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:41.000Z,1478897681.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:41.300Z,1478897681.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:41.397Z,1478897681.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:41.788Z,1478897681.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:42.097Z,1478897682.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:42.202Z,1478897682.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:42.508Z,1478897682.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:42.578Z,1478897682.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:42.977Z,1478897682.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:43.304Z,1478897683.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:43.373Z,1478897683.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:43.779Z,1478897683.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:44.101Z,1478897684.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:44.206Z,1478897684.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:44.516Z,1478897684.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:44.613Z,1478897684.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:45.012Z,1478897685.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:45.312Z,1478897685.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:45.391Z,1478897685.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:45.840Z,1478897685.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:46.108Z,1478897686.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:46.244Z,1478897686.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:46.571Z,1478897686.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:46.632Z,1478897686.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:46.994Z,1478897686.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:47.380Z,1478897687.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:47.428Z,1478897687.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:47.806Z,1478897687.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:48.224Z,1478897688.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:48.228Z,1478897688.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:48.643Z,1478897688.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:48.977Z,1478897688.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:49.008Z,1478897689.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:49.406Z,1478897689.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:49.799Z,1478897689.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:49.804Z,1478897689.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:50.177Z,1478897690.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:50.600Z,1478897690.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:50.622Z,1478897690.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:50.976Z,1478897690.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:51.008Z,1478897691.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:51.369Z,1478897691.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:51.782Z,1478897691.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:51.804Z,1478897691.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:52.180Z,1478897692.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:52.480Z,1478897692.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:52.577Z,1478897692.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:52.961Z,1478897692.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:53.276Z,1478897693.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:53.380Z,1478897693.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:53.771Z,1478897693.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:54.073Z,1478897694.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:54.170Z,1478897694.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:54.484Z,1478897694.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:54.578Z,1478897694.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:54.982Z,1478897694.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:55.280Z,1478897695.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:55.376Z,1478897695.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:55.770Z,1478897695.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:56.077Z,1478897696.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:56.176Z,1478897696.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:56.488Z,1478897696.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:56.597Z,1478897696.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:56.977Z,1478897696.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:57.284Z,1478897697.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:57.387Z,1478897697.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:57.795Z,1478897697.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:58.084Z,1478897698.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:58.192Z,1478897698.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:58.496Z,1478897698.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:58.605Z,1478897698.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:58.978Z,1478897698.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:59.292Z,1478897699.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:54:59.372Z,1478897699.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:54:59.829Z,1478897699.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:00.088Z,1478897700.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:00.244Z,1478897700.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:00.597Z,1478897700.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:00.628Z,1478897700.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:00.973Z,1478897700.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:01.413Z,1478897701.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:01.424Z,1478897701.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:01.770Z,1478897701.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:02.214Z,1478897702.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:02.220Z,1478897702.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:02.605Z,1478897702.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:02.940Z,1478897702.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:03.002Z,1478897703.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:03.369Z,1478897703.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:03.736Z,1478897703.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:03.770Z,1478897703.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:04.173Z,1478897704.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:04.534Z,1478897704.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:04.633Z,1478897704.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:04.956Z,1478897704.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:04.997Z,1478897704.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:05.369Z,1478897705.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:05.752Z,1478897705.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:05.769Z,1478897705.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:06.173Z,1478897706.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:06.456Z,1478897706.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:06.567Z,1478897706.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:06.977Z,1478897706.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:07.252Z,1478897707.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:07.369Z,1478897707.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:07.774Z,1478897707.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:08.049Z,1478897708.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:08.178Z,1478897708.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:08.460Z,1478897708.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:08.578Z,1478897708.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:08.975Z,1478897708.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:09.256Z,1478897709.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:09.373Z,1478897709.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:09.781Z,1478897709.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:10.053Z,1478897710.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:10.181Z,1478897710.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:10.468Z,1478897710.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:10.586Z,1478897710.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:11.002Z,1478897711.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:11.264Z,1478897711.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:11.386Z,1478897711.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:11.787Z,1478897711.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:12.061Z,1478897712.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:12.191Z,1478897712.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:12.472Z,1478897712.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:12.573Z,1478897712.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:13.004Z,1478897713.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:13.268Z,1478897713.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:13.392Z,1478897713.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:13.776Z,1478897713.776 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:13.776Z,1478897713.776 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 301
2016-11-11T20:55:13.776Z,1478897713.776 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:55:13.783Z,1478897713.783 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:13.783Z,1478897713.783 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 301
2016-11-11T20:55:13.783Z,1478897713.783 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:55:13.787Z,1478897713.787 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:13.788Z,1478897713.787 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 301
2016-11-11T20:55:13.788Z,1478897713.788 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:55:13.802Z,1478897713.802 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:55:13.802Z,1478897713.802 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:55:13.803Z,1478897713.803 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:55:14.065Z,1478897714.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:14.267Z,1478897714.267 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:55:14.267Z,1478897714.267 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 301
2016-11-11T20:55:14.268Z,1478897714.268 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:55:14.268Z,1478897714.268 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 301
2016-11-11T20:55:14.269Z,1478897714.269 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:55:14.269Z,1478897714.269 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 301
2016-11-11T20:55:14.564Z,1478897714.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:55:14.564Z,1478897714.564 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:55:14.564Z,1478897714.565 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:55:14.598Z,1478897714.598 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:55:14.598Z,1478897714.598 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:55:14.598Z,1478897714.598 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:55:14.599Z,1478897714.599 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:55:14.600Z,1478897714.599 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:55:14.600Z,1478897714.600 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:55:14.860Z,1478897714.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:14.991Z,1478897714.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:15.269Z,1478897715.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:15.392Z,1478897715.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:15.817Z,1478897715.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:16.064Z,1478897716.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:16.171Z,1478897716.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:16.613Z,1478897716.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:16.860Z,1478897716.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:16.988Z,1478897716.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:17.272Z,1478897717.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:17.370Z,1478897717.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:17.777Z,1478897717.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:18.068Z,1478897718.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:18.864Z,1478897718.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:19.272Z,1478897719.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:20.069Z,1478897720.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:20.476Z,1478897720.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:21.273Z,1478897721.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:21.378Z,1478897721.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:21.395Z,1478897721.395 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T20:50:20.3Z
2016-11-11T20:55:21.395Z,1478897721.395 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T20:55:21.395Z,1478897721.395 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T20:55:21.524Z,1478897721.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:22.068Z,1478897722.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:22.450Z,1478897722.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:22.480Z,1478897722.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:22.578Z,1478897722.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:22.945Z,1478897722.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:23.276Z,1478897723.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:23.353Z,1478897723.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:24.072Z,1478897724.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:24.484Z,1478897724.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:25.280Z,1478897725.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:26.076Z,1478897726.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:26.484Z,1478897726.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:26.804Z,1478897726.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:26.858Z,1478897726.858 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0372.lzma
2016-11-11T20:55:26.957Z,1478897726.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:27.280Z,1478897727.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:27.308Z,1478897727.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:27.634Z,1478897727.634 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0372.lzma.bak
2016-11-11T20:55:27.634Z,1478897727.634 [DataOverHttps](INFO): SBD MOMSN=4555753
2016-11-11T20:55:27.680Z,1478897727.681 [PNI_TCM](ERROR): CRC does not match. Expected:0x47735 got:0x4438
2016-11-11T20:55:27.721Z,1478897727.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:28.076Z,1478897728.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:28.532Z,1478897728.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:29.193Z,1478897729.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:29.312Z,1478897729.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:29.328Z,1478897729.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:30.124Z,1478897730.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:30.884Z,1478897730.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:31.680Z,1478897731.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:32.477Z,1478897732.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:32.888Z,1478897732.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:33.005Z,1478897733.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:33.145Z,1478897733.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:33.541Z,1478897733.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:33.684Z,1478897733.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:33.941Z,1478897733.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:34.306Z,1478897734.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:34.416Z,1478897734.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:34.710Z,1478897734.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:35.212Z,1478897735.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:36.009Z,1478897736.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:36.420Z,1478897736.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:37.216Z,1478897737.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:38.013Z,1478897738.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:38.264Z,1478897738.264 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T20:55:38.311Z,1478897738.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:38.372Z,1478897738.372 [DataOverHttps](INFO): Sending 234 bytes from file Logs/20161111T044527/Express0373.lzma
2016-11-11T20:55:38.424Z,1478897738.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:38.457Z,1478897738.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:38.789Z,1478897738.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:39.141Z,1478897739.141 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0373.lzma.bak
2016-11-11T20:55:39.142Z,1478897739.142 [DataOverHttps](INFO): SBD MOMSN=4555755
2016-11-11T20:55:39.199Z,1478897739.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:39.220Z,1478897739.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:40.017Z,1478897740.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:40.428Z,1478897740.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:40.555Z,1478897740.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:40.586Z,1478897740.586 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T20:55:40.586Z,1478897740.586 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T20:55:40.586Z,1478897740.586 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T20:55:40.689Z,1478897740.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:41.224Z,1478897741.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:42.022Z,1478897742.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:42.504Z,1478897742.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:43.300Z,1478897743.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:44.025Z,1478897744.026 [NAL9602](INFO): Powering down
2016-11-11T20:55:44.064Z,1478897744.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:44.096Z,1478897744.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:44.197Z,1478897744.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:44.565Z,1478897744.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:44.852Z,1478897744.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:45.004Z,1478897745.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:45.362Z,1478897745.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:45.648Z,1478897745.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:45.809Z,1478897745.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:46.177Z,1478897746.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:46.445Z,1478897746.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:46.591Z,1478897746.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:46.856Z,1478897746.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:46.977Z,1478897746.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:47.389Z,1478897747.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:47.652Z,1478897747.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:47.795Z,1478897747.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:48.161Z,1478897748.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:48.372Z,1478897748.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:48.603Z,1478897748.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:48.952Z,1478897748.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:49.168Z,1478897749.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:49.365Z,1478897749.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:49.761Z,1478897749.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:49.965Z,1478897749.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:50.164Z,1478897750.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:50.376Z,1478897750.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:50.565Z,1478897750.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:50.969Z,1478897750.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:51.172Z,1478897751.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:51.360Z,1478897751.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:51.768Z,1478897751.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:51.969Z,1478897751.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:52.170Z,1478897752.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:52.380Z,1478897752.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:52.561Z,1478897752.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:52.971Z,1478897752.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:53.176Z,1478897753.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:53.363Z,1478897753.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:53.765Z,1478897753.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:53.973Z,1478897753.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:54.164Z,1478897754.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:54.388Z,1478897754.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:54.561Z,1478897754.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:54.967Z,1478897754.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:55.184Z,1478897755.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:55.368Z,1478897755.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:55.761Z,1478897755.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:55.980Z,1478897755.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:56.165Z,1478897756.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:56.468Z,1478897756.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:56.565Z,1478897756.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:56.969Z,1478897756.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:57.264Z,1478897757.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:57.367Z,1478897757.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:57.762Z,1478897757.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:58.060Z,1478897758.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:58.160Z,1478897758.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:58.601Z,1478897758.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:58.824Z,1478897758.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:58.962Z,1478897758.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:59.363Z,1478897759.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:55:59.620Z,1478897759.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:55:59.799Z,1478897759.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:00.165Z,1478897760.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:00.417Z,1478897760.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:00.566Z,1478897760.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:00.828Z,1478897760.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:01.013Z,1478897761.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:01.365Z,1478897761.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:01.624Z,1478897761.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:01.830Z,1478897761.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:02.181Z,1478897762.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:02.360Z,1478897762.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:02.571Z,1478897762.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:02.968Z,1478897762.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:03.156Z,1478897763.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:03.368Z,1478897763.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:03.767Z,1478897763.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:03.954Z,1478897763.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:04.169Z,1478897764.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:04.364Z,1478897764.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:04.568Z,1478897764.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:04.951Z,1478897764.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:05.161Z,1478897765.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:05.352Z,1478897765.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:05.757Z,1478897765.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:05.957Z,1478897765.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:06.235Z,1478897766.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:06.368Z,1478897766.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:06.561Z,1478897766.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:06.961Z,1478897766.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:07.164Z,1478897767.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:07.363Z,1478897767.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:07.780Z,1478897767.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:07.961Z,1478897767.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:08.173Z,1478897768.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:08.372Z,1478897768.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:08.560Z,1478897768.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:08.957Z,1478897768.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:09.168Z,1478897769.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:09.360Z,1478897769.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:09.846Z,1478897769.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:09.964Z,1478897769.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:10.167Z,1478897770.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:10.444Z,1478897770.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:10.572Z,1478897770.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:10.969Z,1478897770.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:11.242Z,1478897771.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:11.361Z,1478897771.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:11.773Z,1478897771.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:12.036Z,1478897772.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:12.166Z,1478897772.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:12.591Z,1478897772.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:12.804Z,1478897772.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:12.957Z,1478897772.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:13.357Z,1478897773.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:13.600Z,1478897773.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:13.760Z,1478897773.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:14.197Z,1478897774.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:14.397Z,1478897774.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:14.558Z,1478897774.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:14.610Z,1478897774.610 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T20:56:14.808Z,1478897774.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:14.961Z,1478897774.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:15.402Z,1478897775.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:15.604Z,1478897775.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:15.765Z,1478897775.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:16.188Z,1478897776.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:16.328Z,1478897776.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:16.587Z,1478897776.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:16.973Z,1478897776.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:17.124Z,1478897777.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:17.382Z,1478897777.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:17.777Z,1478897777.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:17.921Z,1478897777.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:18.181Z,1478897778.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:18.344Z,1478897778.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:18.569Z,1478897778.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:18.969Z,1478897778.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:19.140Z,1478897779.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:19.364Z,1478897779.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:19.773Z,1478897779.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:19.937Z,1478897779.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:20.172Z,1478897780.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:20.348Z,1478897780.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:20.569Z,1478897780.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:20.973Z,1478897780.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:21.144Z,1478897781.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:21.358Z,1478897781.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:21.758Z,1478897781.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:21.941Z,1478897781.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:22.164Z,1478897782.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:22.352Z,1478897782.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:22.559Z,1478897782.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:22.969Z,1478897782.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:23.148Z,1478897783.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:23.359Z,1478897783.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:23.781Z,1478897783.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:23.945Z,1478897783.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:24.170Z,1478897784.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:24.569Z,1478897784.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:24.740Z,1478897784.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:24.965Z,1478897784.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:25.153Z,1478897785.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:25.361Z,1478897785.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:25.769Z,1478897785.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:25.949Z,1478897785.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:26.169Z,1478897786.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:26.597Z,1478897786.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:26.744Z,1478897786.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:26.977Z,1478897786.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:27.156Z,1478897787.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:27.357Z,1478897787.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:27.791Z,1478897787.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:27.952Z,1478897787.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:28.157Z,1478897788.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:28.601Z,1478897788.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:28.748Z,1478897788.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:28.968Z,1478897788.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:29.156Z,1478897789.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:29.397Z,1478897789.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:29.759Z,1478897789.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:29.952Z,1478897789.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:30.182Z,1478897790.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:30.360Z,1478897790.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:30.604Z,1478897790.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:30.960Z,1478897790.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:31.156Z,1478897791.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:31.365Z,1478897791.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:31.770Z,1478897791.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:31.952Z,1478897791.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:32.169Z,1478897792.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:32.360Z,1478897792.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:32.569Z,1478897792.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:32.969Z,1478897792.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:33.156Z,1478897793.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:33.362Z,1478897793.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:33.768Z,1478897793.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:33.952Z,1478897793.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:34.170Z,1478897794.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:34.364Z,1478897794.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:34.562Z,1478897794.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:34.960Z,1478897794.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:35.160Z,1478897795.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:35.370Z,1478897795.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:35.763Z,1478897795.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:35.956Z,1478897795.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:36.168Z,1478897796.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:36.364Z,1478897796.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:36.570Z,1478897796.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:36.962Z,1478897796.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:37.160Z,1478897797.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:37.364Z,1478897797.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:37.765Z,1478897797.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:37.956Z,1478897797.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:38.169Z,1478897798.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:38.412Z,1478897798.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:38.568Z,1478897798.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:38.968Z,1478897798.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:39.208Z,1478897799.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:39.368Z,1478897799.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:39.772Z,1478897799.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:40.004Z,1478897800.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:40.173Z,1478897800.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:40.572Z,1478897800.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:40.760Z,1478897800.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:40.980Z,1478897800.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:41.393Z,1478897801.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:41.564Z,1478897801.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:42.361Z,1478897802.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:42.772Z,1478897802.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:43.568Z,1478897803.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:44.296Z,1478897804.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:45.092Z,1478897805.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:45.888Z,1478897805.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:46.300Z,1478897806.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:47.096Z,1478897807.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:47.893Z,1478897807.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:48.304Z,1478897808.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:49.100Z,1478897809.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:49.897Z,1478897809.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:50.248Z,1478897810.248 [BPC1](ERROR): Failed to receive battery data
2016-11-11T20:56:50.248Z,1478897810.248 [BPC1] Communications Fault, FailCount= 1
2016-11-11T20:56:50.248Z,1478897810.248 [BPC1](ERROR): Communications Fault
2016-11-11T20:56:50.301Z,1478897810.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:50.312Z,1478897810.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:50.396Z,1478897810.396 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T20:56:50.509Z,1478897810.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:50.857Z,1478897810.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:51.108Z,1478897811.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:51.249Z,1478897811.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:51.268Z,1478897811.268 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:56:51.269Z,1478897811.269 [BPC1] No Fault, FailCount= 1
2016-11-11T20:56:51.775Z,1478897811.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:51.904Z,1478897811.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:52.096Z,1478897812.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:52.376Z,1478897812.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:52.483Z,1478897812.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:52.853Z,1478897812.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:53.174Z,1478897813.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:53.282Z,1478897813.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:53.647Z,1478897813.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:53.968Z,1478897813.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:54.058Z,1478897814.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:54.468Z,1478897814.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:54.732Z,1478897814.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:54.848Z,1478897814.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:55.239Z,1478897815.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:55.528Z,1478897815.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:55.681Z,1478897815.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:56.040Z,1478897816.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:56.325Z,1478897816.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:56.439Z,1478897816.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:56.756Z,1478897816.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:56.885Z,1478897816.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:57.273Z,1478897817.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:57.553Z,1478897817.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:57.657Z,1478897817.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:58.061Z,1478897818.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:58.260Z,1478897818.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:58.467Z,1478897818.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:58.865Z,1478897818.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:59.056Z,1478897819.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:56:59.269Z,1478897819.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:59.662Z,1478897819.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:56:59.855Z,1478897819.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:00.051Z,1478897820.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:00.268Z,1478897820.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:00.505Z,1478897820.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:00.896Z,1478897820.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:01.064Z,1478897821.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:01.266Z,1478897821.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:01.669Z,1478897821.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:01.861Z,1478897821.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:02.078Z,1478897822.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:02.272Z,1478897822.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:02.465Z,1478897822.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:02.869Z,1478897822.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:03.068Z,1478897823.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:03.255Z,1478897823.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:03.661Z,1478897823.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:03.865Z,1478897823.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:04.067Z,1478897824.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:04.276Z,1478897824.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:04.522Z,1478897824.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:04.861Z,1478897824.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:05.072Z,1478897825.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:05.273Z,1478897825.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:05.666Z,1478897825.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:05.868Z,1478897825.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:06.084Z,1478897826.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:06.364Z,1478897826.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:06.479Z,1478897826.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:06.858Z,1478897826.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:07.160Z,1478897827.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:07.261Z,1478897827.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:07.665Z,1478897827.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:07.956Z,1478897827.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:08.064Z,1478897828.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:08.469Z,1478897828.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:08.720Z,1478897828.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:08.873Z,1478897828.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:09.245Z,1478897829.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:09.517Z,1478897829.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:09.658Z,1478897829.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:10.061Z,1478897830.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:10.312Z,1478897830.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:10.480Z,1478897830.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:10.724Z,1478897830.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:10.870Z,1478897830.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:11.282Z,1478897831.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:11.520Z,1478897831.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:11.662Z,1478897831.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:12.061Z,1478897832.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:12.244Z,1478897832.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:12.468Z,1478897832.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:12.858Z,1478897832.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:13.040Z,1478897833.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:13.265Z,1478897833.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:13.669Z,1478897833.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:13.837Z,1478897833.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:14.058Z,1478897834.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:14.248Z,1478897834.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:14.465Z,1478897834.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:14.864Z,1478897834.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:15.044Z,1478897835.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:15.255Z,1478897835.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:15.677Z,1478897835.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:15.841Z,1478897835.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:16.059Z,1478897836.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:16.252Z,1478897836.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:16.464Z,1478897836.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:16.862Z,1478897836.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:17.048Z,1478897837.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:17.294Z,1478897837.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:17.647Z,1478897837.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:17.845Z,1478897837.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:18.056Z,1478897838.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:18.256Z,1478897838.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:18.505Z,1478897838.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:18.850Z,1478897838.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:19.052Z,1478897839.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:19.274Z,1478897839.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:19.657Z,1478897839.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:19.848Z,1478897839.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:20.101Z,1478897840.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:20.333Z,1478897840.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:20.457Z,1478897840.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:20.881Z,1478897840.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:21.128Z,1478897841.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:21.256Z,1478897841.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:21.659Z,1478897841.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:21.924Z,1478897841.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:22.060Z,1478897842.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:22.460Z,1478897842.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:22.700Z,1478897842.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:22.859Z,1478897842.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:23.260Z,1478897843.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:23.496Z,1478897843.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:23.660Z,1478897843.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:24.062Z,1478897844.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:24.295Z,1478897844.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:24.458Z,1478897844.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:24.720Z,1478897844.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:24.860Z,1478897844.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:25.259Z,1478897845.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:25.516Z,1478897845.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:25.678Z,1478897845.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:26.048Z,1478897846.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:26.220Z,1478897846.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:26.453Z,1478897846.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:26.853Z,1478897846.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:27.016Z,1478897847.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:27.253Z,1478897847.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:27.658Z,1478897847.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:27.813Z,1478897847.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:28.041Z,1478897848.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:28.449Z,1478897848.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:28.608Z,1478897848.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:28.841Z,1478897848.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:29.245Z,1478897849.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:29.404Z,1478897849.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:29.645Z,1478897849.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:30.050Z,1478897850.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:30.200Z,1478897850.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:30.445Z,1478897850.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:30.844Z,1478897850.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:30.996Z,1478897850.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:31.245Z,1478897851.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:31.653Z,1478897851.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:31.792Z,1478897851.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:32.045Z,1478897852.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:32.443Z,1478897852.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:32.588Z,1478897852.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:32.858Z,1478897852.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:33.269Z,1478897853.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:33.384Z,1478897853.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:33.668Z,1478897853.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:34.044Z,1478897854.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:34.180Z,1478897854.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:34.521Z,1478897854.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:34.843Z,1478897854.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:34.976Z,1478897854.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:35.266Z,1478897855.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:35.640Z,1478897855.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:35.772Z,1478897855.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:36.066Z,1478897856.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:36.440Z,1478897856.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:36.568Z,1478897856.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:36.849Z,1478897856.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:37.253Z,1478897857.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:37.364Z,1478897857.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:37.644Z,1478897857.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:38.044Z,1478897858.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:38.160Z,1478897858.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:38.443Z,1478897858.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:38.844Z,1478897858.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:38.956Z,1478897858.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:39.249Z,1478897859.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:39.643Z,1478897859.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:39.752Z,1478897859.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:40.043Z,1478897860.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:40.444Z,1478897860.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:40.549Z,1478897860.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:40.843Z,1478897860.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:41.243Z,1478897861.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:41.344Z,1478897861.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:41.641Z,1478897861.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:42.140Z,1478897862.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:42.936Z,1478897862.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:43.732Z,1478897863.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:44.528Z,1478897864.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:45.053Z,1478897865.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:45.181Z,1478897865.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:45.324Z,1478897865.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:45.522Z,1478897865.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:45.928Z,1478897865.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:46.120Z,1478897866.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:46.336Z,1478897866.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:46.760Z,1478897866.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:46.916Z,1478897866.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:47.122Z,1478897867.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:47.525Z,1478897867.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:47.712Z,1478897867.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:47.989Z,1478897867.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:48.156Z,1478897868.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:48.361Z,1478897868.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:48.564Z,1478897868.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:48.733Z,1478897868.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:48.972Z,1478897868.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:49.149Z,1478897869.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:49.380Z,1478897869.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:49.533Z,1478897869.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:49.788Z,1478897869.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:49.953Z,1478897869.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:50.196Z,1478897870.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:50.349Z,1478897870.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:50.608Z,1478897870.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:50.733Z,1478897870.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:51.016Z,1478897871.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:51.133Z,1478897871.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:51.428Z,1478897871.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:51.533Z,1478897871.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:51.836Z,1478897871.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:51.933Z,1478897871.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:52.244Z,1478897872.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:52.342Z,1478897872.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:52.656Z,1478897872.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:52.737Z,1478897872.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:53.064Z,1478897873.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:53.145Z,1478897873.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:53.521Z,1478897873.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:53.860Z,1478897873.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:53.941Z,1478897873.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:54.268Z,1478897874.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:54.345Z,1478897874.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:54.737Z,1478897874.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:55.064Z,1478897875.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:55.136Z,1478897875.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:55.538Z,1478897875.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:55.860Z,1478897875.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:55.938Z,1478897875.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:56.268Z,1478897876.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:56.338Z,1478897876.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:56.742Z,1478897876.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:57.064Z,1478897877.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:57.136Z,1478897877.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:57.548Z,1478897877.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:57.860Z,1478897877.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:57.946Z,1478897877.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:58.268Z,1478897878.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:58.326Z,1478897878.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:58.727Z,1478897878.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:59.064Z,1478897879.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:59.154Z,1478897879.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:59.541Z,1478897879.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:57:59.860Z,1478897879.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:57:59.941Z,1478897879.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:00.268Z,1478897880.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:00.326Z,1478897880.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:00.724Z,1478897880.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:01.064Z,1478897881.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:01.136Z,1478897881.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:01.535Z,1478897881.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:01.861Z,1478897881.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:01.940Z,1478897881.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:02.272Z,1478897882.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:02.370Z,1478897882.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:02.761Z,1478897882.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:03.068Z,1478897883.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:03.161Z,1478897883.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:03.528Z,1478897883.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:03.864Z,1478897883.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:03.969Z,1478897883.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:04.332Z,1478897884.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:04.660Z,1478897884.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:04.822Z,1478897884.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:05.138Z,1478897885.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:05.144Z,1478897885.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:05.571Z,1478897885.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:05.937Z,1478897885.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:05.940Z,1478897885.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:06.338Z,1478897886.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:06.628Z,1478897886.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:06.737Z,1478897886.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:07.136Z,1478897887.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:07.424Z,1478897887.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:07.538Z,1478897887.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:07.936Z,1478897887.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:08.152Z,1478897888.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:08.333Z,1478897888.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:08.738Z,1478897888.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:08.948Z,1478897888.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:09.136Z,1478897889.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:09.537Z,1478897889.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:09.745Z,1478897889.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:09.930Z,1478897889.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:10.156Z,1478897890.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:10.336Z,1478897890.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:10.737Z,1478897890.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:10.952Z,1478897890.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:11.129Z,1478897891.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:11.536Z,1478897891.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:11.749Z,1478897891.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:11.940Z,1478897891.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:12.160Z,1478897892.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:12.338Z,1478897892.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:12.736Z,1478897892.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:12.956Z,1478897892.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:13.133Z,1478897893.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:13.537Z,1478897893.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:13.753Z,1478897893.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:13.947Z,1478897893.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:14.164Z,1478897894.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:14.341Z,1478897894.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:14.749Z,1478897894.749 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:14.749Z,1478897894.749 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 302
2016-11-11T20:58:14.749Z,1478897894.749 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T20:58:14.765Z,1478897894.764 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:14.765Z,1478897894.765 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 302
2016-11-11T20:58:14.765Z,1478897894.765 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T20:58:14.767Z,1478897894.767 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:14.767Z,1478897894.767 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 302
2016-11-11T20:58:14.767Z,1478897894.767 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T20:58:14.802Z,1478897894.802 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T20:58:14.802Z,1478897894.802 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T20:58:14.802Z,1478897894.802 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T20:58:14.960Z,1478897894.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:15.158Z,1478897895.158 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T20:58:15.159Z,1478897895.158 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 302
2016-11-11T20:58:15.163Z,1478897895.163 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T20:58:15.163Z,1478897895.164 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 302
2016-11-11T20:58:15.164Z,1478897895.164 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T20:58:15.164Z,1478897895.164 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 302
2016-11-11T20:58:15.536Z,1478897895.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T20:58:15.536Z,1478897895.536 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:58:15.537Z,1478897895.537 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:58:15.541Z,1478897895.541 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T20:58:15.542Z,1478897895.542 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:58:15.542Z,1478897895.542 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:58:15.543Z,1478897895.543 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T20:58:15.543Z,1478897895.543 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T20:58:15.544Z,1478897895.544 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T20:58:15.758Z,1478897895.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:15.964Z,1478897895.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:16.244Z,1478897896.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:16.351Z,1478897896.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:16.726Z,1478897896.726 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T20:58:16.726Z,1478897896.726 [BPC1] Data Fault, FailCount= 1
2016-11-11T20:58:16.726Z,1478897896.726 [BPC1](ERROR): Data Fault
2016-11-11T20:58:16.735Z,1478897896.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:16.754Z,1478897896.754 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T20:58:17.040Z,1478897897.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:17.137Z,1478897897.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:17.527Z,1478897897.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:17.836Z,1478897897.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:17.948Z,1478897897.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:17.984Z,1478897897.984 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T20:58:17.985Z,1478897897.985 [BPC1] No Fault, FailCount= 1
2016-11-11T20:58:18.378Z,1478897898.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:18.608Z,1478897898.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:18.769Z,1478897898.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:19.133Z,1478897899.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:19.404Z,1478897899.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:19.536Z,1478897899.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:19.965Z,1478897899.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:20.201Z,1478897900.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:20.337Z,1478897900.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:20.612Z,1478897900.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:20.732Z,1478897900.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:21.135Z,1478897901.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:21.408Z,1478897901.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:21.564Z,1478897901.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:21.941Z,1478897901.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:22.120Z,1478897902.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:22.333Z,1478897902.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:22.741Z,1478897902.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:22.916Z,1478897902.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:23.140Z,1478897903.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:23.536Z,1478897903.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:23.713Z,1478897903.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:23.943Z,1478897903.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:24.125Z,1478897904.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:24.347Z,1478897904.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:24.720Z,1478897904.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:24.920Z,1478897904.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:25.145Z,1478897905.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:25.537Z,1478897905.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:25.717Z,1478897905.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:25.935Z,1478897905.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:26.128Z,1478897906.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:26.332Z,1478897906.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:26.734Z,1478897906.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:26.924Z,1478897906.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:27.132Z,1478897907.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:27.539Z,1478897907.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:27.722Z,1478897907.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:27.934Z,1478897907.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:28.172Z,1478897908.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:28.338Z,1478897908.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:28.732Z,1478897908.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:28.968Z,1478897908.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:29.139Z,1478897909.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:29.529Z,1478897909.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:29.764Z,1478897909.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:29.937Z,1478897909.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:30.224Z,1478897910.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:30.341Z,1478897910.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:30.769Z,1478897910.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:31.020Z,1478897911.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:31.147Z,1478897911.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:31.533Z,1478897911.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:31.816Z,1478897911.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:31.969Z,1478897911.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:32.333Z,1478897912.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:32.576Z,1478897912.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:32.785Z,1478897912.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:33.169Z,1478897913.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:33.372Z,1478897913.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:33.541Z,1478897913.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:33.937Z,1478897913.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:34.169Z,1478897914.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:34.345Z,1478897914.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:34.584Z,1478897914.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:34.726Z,1478897914.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:35.125Z,1478897915.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:35.380Z,1478897915.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:35.524Z,1478897915.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:35.933Z,1478897915.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:36.104Z,1478897916.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:36.332Z,1478897916.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:36.746Z,1478897916.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:36.900Z,1478897916.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:37.137Z,1478897917.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:37.530Z,1478897917.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:37.697Z,1478897917.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:37.934Z,1478897917.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:38.108Z,1478897918.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:38.353Z,1478897918.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:38.733Z,1478897918.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:38.904Z,1478897918.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:39.137Z,1478897919.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:39.533Z,1478897919.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:39.701Z,1478897919.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:39.940Z,1478897919.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:40.113Z,1478897920.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:40.379Z,1478897920.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:40.745Z,1478897920.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:40.908Z,1478897920.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:41.133Z,1478897921.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:41.536Z,1478897921.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:41.705Z,1478897921.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:41.940Z,1478897921.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:42.116Z,1478897922.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:42.912Z,1478897922.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:43.708Z,1478897923.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:44.192Z,1478897924.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:44.988Z,1478897924.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:45.359Z,1478897925.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:45.504Z,1478897925.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:45.784Z,1478897925.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:45.854Z,1478897925.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:46.255Z,1478897926.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:46.556Z,1478897926.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:46.669Z,1478897926.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:47.051Z,1478897927.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:47.352Z,1478897927.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:47.469Z,1478897927.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:47.869Z,1478897927.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:48.149Z,1478897928.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:48.264Z,1478897928.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:48.560Z,1478897928.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:48.637Z,1478897928.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:49.036Z,1478897929.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:49.356Z,1478897929.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:49.445Z,1478897929.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:49.852Z,1478897929.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:50.092Z,1478897930.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:50.236Z,1478897930.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:50.637Z,1478897930.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:50.888Z,1478897930.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:51.037Z,1478897931.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:51.439Z,1478897931.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:51.685Z,1478897931.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:51.849Z,1478897931.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:52.096Z,1478897932.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:52.245Z,1478897932.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:52.640Z,1478897932.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:52.892Z,1478897932.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:53.044Z,1478897933.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:53.450Z,1478897933.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:53.697Z,1478897933.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:53.846Z,1478897933.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:54.112Z,1478897934.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:54.245Z,1478897934.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:54.652Z,1478897934.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:54.908Z,1478897934.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:55.052Z,1478897935.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:55.449Z,1478897935.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:55.705Z,1478897935.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:55.850Z,1478897935.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:56.116Z,1478897936.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:56.240Z,1478897936.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:56.656Z,1478897936.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:56.912Z,1478897936.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:57.032Z,1478897937.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:57.460Z,1478897937.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:57.708Z,1478897937.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:57.859Z,1478897937.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:58.176Z,1478897938.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:58.241Z,1478897938.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:58.642Z,1478897938.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:58.972Z,1478897938.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:59.047Z,1478897939.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:59.449Z,1478897939.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:58:59.768Z,1478897939.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:58:59.877Z,1478897939.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:00.277Z,1478897940.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:00.538Z,1478897940.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:00.660Z,1478897940.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:01.070Z,1478897941.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:01.332Z,1478897941.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:01.457Z,1478897941.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:01.861Z,1478897941.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:02.129Z,1478897942.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:02.275Z,1478897942.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:02.542Z,1478897942.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:02.638Z,1478897942.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:03.038Z,1478897943.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:03.336Z,1478897943.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:03.436Z,1478897943.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:03.846Z,1478897943.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:04.060Z,1478897944.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:04.245Z,1478897944.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:04.639Z,1478897944.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:04.856Z,1478897944.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:05.045Z,1478897945.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:05.450Z,1478897945.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:05.653Z,1478897945.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:05.847Z,1478897945.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:06.092Z,1478897946.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:06.245Z,1478897946.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:06.639Z,1478897946.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:06.888Z,1478897946.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:07.039Z,1478897947.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:07.445Z,1478897947.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:07.684Z,1478897947.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:07.849Z,1478897947.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:08.092Z,1478897948.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:08.242Z,1478897948.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:08.648Z,1478897948.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:08.888Z,1478897948.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:09.045Z,1478897949.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:09.449Z,1478897949.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:09.684Z,1478897949.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:09.844Z,1478897949.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:10.096Z,1478897950.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:10.239Z,1478897950.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:10.643Z,1478897950.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:10.892Z,1478897950.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:11.049Z,1478897951.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:11.441Z,1478897951.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:11.688Z,1478897951.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:11.840Z,1478897951.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:12.152Z,1478897952.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:12.240Z,1478897952.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:12.649Z,1478897952.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:12.948Z,1478897952.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:13.057Z,1478897953.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:13.437Z,1478897953.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:13.744Z,1478897953.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:13.840Z,1478897953.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:14.293Z,1478897954.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:14.510Z,1478897954.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:14.638Z,1478897954.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:15.084Z,1478897955.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:15.304Z,1478897955.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:15.439Z,1478897955.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:15.865Z,1478897955.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:16.101Z,1478897956.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:16.249Z,1478897956.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:16.512Z,1478897956.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:16.665Z,1478897956.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:17.058Z,1478897957.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:17.308Z,1478897957.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:17.432Z,1478897957.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:17.837Z,1478897957.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:18.036Z,1478897958.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:18.241Z,1478897958.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:18.632Z,1478897958.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:18.832Z,1478897958.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:19.035Z,1478897959.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:19.438Z,1478897959.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:19.629Z,1478897959.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:19.844Z,1478897959.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:20.040Z,1478897960.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:20.239Z,1478897960.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:20.638Z,1478897960.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:20.836Z,1478897960.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:21.045Z,1478897961.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:21.440Z,1478897961.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:21.633Z,1478897961.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:21.840Z,1478897961.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:22.044Z,1478897962.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:22.252Z,1478897962.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:22.648Z,1478897962.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:22.841Z,1478897962.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:23.051Z,1478897963.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:23.452Z,1478897963.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:23.637Z,1478897963.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:23.853Z,1478897963.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:24.048Z,1478897964.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:24.251Z,1478897964.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:24.649Z,1478897964.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:24.844Z,1478897964.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:25.057Z,1478897965.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:25.437Z,1478897965.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:25.640Z,1478897965.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:25.838Z,1478897965.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:26.132Z,1478897966.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:26.249Z,1478897966.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:26.649Z,1478897966.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:26.928Z,1478897966.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:27.057Z,1478897967.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:27.435Z,1478897967.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:27.724Z,1478897967.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:27.844Z,1478897967.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:28.289Z,1478897968.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:28.492Z,1478897968.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:28.685Z,1478897968.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:29.045Z,1478897969.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:29.288Z,1478897969.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:29.484Z,1478897969.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:29.843Z,1478897969.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:30.084Z,1478897970.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:30.276Z,1478897970.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:30.496Z,1478897970.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:30.677Z,1478897970.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:31.041Z,1478897971.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:31.292Z,1478897971.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:31.441Z,1478897971.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:31.848Z,1478897971.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:32.016Z,1478897972.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:32.243Z,1478897972.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:32.645Z,1478897972.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:32.812Z,1478897972.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:33.049Z,1478897973.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:33.442Z,1478897973.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:33.609Z,1478897973.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:33.853Z,1478897973.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:34.020Z,1478897974.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:34.249Z,1478897974.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:34.642Z,1478897974.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:34.816Z,1478897974.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:35.048Z,1478897975.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:35.442Z,1478897975.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:35.613Z,1478897975.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:35.853Z,1478897975.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:36.024Z,1478897976.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:36.247Z,1478897976.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:36.649Z,1478897976.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:36.820Z,1478897976.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:37.044Z,1478897977.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:37.458Z,1478897977.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:37.617Z,1478897977.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:37.853Z,1478897977.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:38.028Z,1478897978.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:38.236Z,1478897978.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:38.641Z,1478897978.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:38.824Z,1478897978.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:39.045Z,1478897979.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:39.444Z,1478897979.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:39.620Z,1478897979.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:39.852Z,1478897979.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:40.116Z,1478897980.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:40.249Z,1478897980.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:40.648Z,1478897980.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:40.912Z,1478897980.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:41.052Z,1478897981.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:41.448Z,1478897981.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:41.708Z,1478897981.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:41.836Z,1478897981.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:42.245Z,1478897982.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:42.470Z,1478897982.470 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:43.264Z,1478897983.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:44.061Z,1478897984.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:44.480Z,1478897984.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:45.276Z,1478897985.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:45.858Z,1478897985.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:45.997Z,1478897985.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:46.004Z,1478897986.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:46.394Z,1478897986.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:46.757Z,1478897986.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:46.800Z,1478897986.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:47.185Z,1478897987.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:47.596Z,1478897987.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:47.620Z,1478897987.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:47.957Z,1478897987.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:48.008Z,1478897988.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:48.353Z,1478897988.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:48.753Z,1478897988.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:48.804Z,1478897988.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:49.152Z,1478897989.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:49.590Z,1478897989.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:49.601Z,1478897989.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:49.961Z,1478897989.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:50.012Z,1478897990.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:50.361Z,1478897990.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:50.803Z,1478897990.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:50.808Z,1478897990.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:51.165Z,1478897991.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:51.605Z,1478897991.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:51.618Z,1478897991.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:51.944Z,1478897991.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:52.016Z,1478897992.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:52.349Z,1478897992.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:52.766Z,1478897992.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:52.812Z,1478897992.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:53.152Z,1478897993.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:53.585Z,1478897993.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:53.608Z,1478897993.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:53.959Z,1478897993.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:54.100Z,1478897994.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:54.352Z,1478897994.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:54.761Z,1478897994.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:54.896Z,1478897994.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:55.170Z,1478897995.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:55.560Z,1478897995.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:55.692Z,1478897995.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:55.990Z,1478897995.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:56.351Z,1478897996.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:56.460Z,1478897996.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:56.751Z,1478897996.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:57.154Z,1478897997.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:57.256Z,1478897997.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:57.556Z,1478897997.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:57.962Z,1478897997.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:58.052Z,1478897998.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:58.357Z,1478897998.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:58.464Z,1478897998.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:58.769Z,1478897998.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:59.154Z,1478897999.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:59.260Z,1478897999.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:59.667Z,1478897999.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T20:59:59.988Z,1478897999.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T20:59:59.990Z,1478897999.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:00.373Z,1478898000.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:00.757Z,1478898000.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:00.784Z,1478898000.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:01.186Z,1478898001.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:01.581Z,1478898001.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:01.619Z,1478898001.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:01.978Z,1478898001.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:02.008Z,1478898002.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:02.419Z,1478898002.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:02.753Z,1478898002.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:02.804Z,1478898002.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:03.163Z,1478898003.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:03.600Z,1478898003.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:03.624Z,1478898003.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:03.964Z,1478898003.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:04.008Z,1478898004.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:04.359Z,1478898004.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:04.764Z,1478898004.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:04.804Z,1478898004.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:05.156Z,1478898005.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:05.600Z,1478898005.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:05.613Z,1478898005.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:05.957Z,1478898005.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:06.012Z,1478898006.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:06.351Z,1478898006.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:06.750Z,1478898006.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:06.808Z,1478898006.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:07.157Z,1478898007.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:07.553Z,1478898007.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:07.604Z,1478898007.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:07.967Z,1478898007.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:08.076Z,1478898008.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:08.371Z,1478898008.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:08.744Z,1478898008.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:08.872Z,1478898008.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:09.149Z,1478898009.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:09.559Z,1478898009.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:09.668Z,1478898009.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:09.951Z,1478898009.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:10.369Z,1478898010.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:10.436Z,1478898010.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:10.757Z,1478898010.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:11.164Z,1478898011.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:11.232Z,1478898011.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:11.569Z,1478898011.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:11.972Z,1478898011.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:12.029Z,1478898012.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:12.348Z,1478898012.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:12.440Z,1478898012.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:12.761Z,1478898012.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:13.152Z,1478898013.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:13.236Z,1478898013.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:13.632Z,1478898013.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:13.948Z,1478898013.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:13.972Z,1478898013.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:14.410Z,1478898014.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:14.751Z,1478898014.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:14.768Z,1478898014.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:15.174Z,1478898015.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:15.565Z,1478898015.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:15.606Z,1478898015.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:15.976Z,1478898015.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:15.989Z,1478898015.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:16.382Z,1478898016.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:16.772Z,1478898016.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:16.779Z,1478898016.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:17.150Z,1478898017.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:17.569Z,1478898017.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:17.643Z,1478898017.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:17.969Z,1478898017.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:17.988Z,1478898017.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:18.352Z,1478898018.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:18.760Z,1478898018.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:18.784Z,1478898018.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:19.165Z,1478898019.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:19.580Z,1478898019.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:19.599Z,1478898019.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:19.963Z,1478898019.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:19.988Z,1478898019.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:20.364Z,1478898020.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:20.756Z,1478898020.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:20.784Z,1478898020.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:21.170Z,1478898021.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:21.565Z,1478898021.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:21.581Z,1478898021.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:21.956Z,1478898021.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:22.052Z,1478898022.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:22.357Z,1478898022.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:22.757Z,1478898022.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:22.848Z,1478898022.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:23.151Z,1478898023.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:23.562Z,1478898023.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:23.644Z,1478898023.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:23.961Z,1478898023.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:24.365Z,1478898024.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:24.420Z,1478898024.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:24.763Z,1478898024.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:25.169Z,1478898025.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:25.216Z,1478898025.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:25.564Z,1478898025.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:26.008Z,1478898026.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:26.012Z,1478898026.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:26.371Z,1478898026.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:26.428Z,1478898026.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:26.759Z,1478898026.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:27.153Z,1478898027.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:27.224Z,1478898027.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:27.587Z,1478898027.587 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T21:00:27.587Z,1478898027.587 [BPC1] Data Fault, FailCount= 1
2016-11-11T21:00:27.587Z,1478898027.587 [BPC1](ERROR): Data Fault
2016-11-11T21:00:27.612Z,1478898027.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:27.668Z,1478898027.668 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T21:00:27.967Z,1478898027.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:27.976Z,1478898027.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:28.364Z,1478898028.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:28.761Z,1478898028.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:28.772Z,1478898028.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:28.783Z,1478898028.783 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:00:28.783Z,1478898028.783 [BPC1] No Fault, FailCount= 1
2016-11-11T21:00:29.213Z,1478898029.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:29.569Z,1478898029.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:29.626Z,1478898029.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:29.964Z,1478898029.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:29.980Z,1478898029.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:30.345Z,1478898030.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:30.751Z,1478898030.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:30.776Z,1478898030.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:31.153Z,1478898031.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:31.573Z,1478898031.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:31.627Z,1478898031.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:31.966Z,1478898031.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:31.980Z,1478898031.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:32.351Z,1478898032.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:32.769Z,1478898032.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:32.776Z,1478898032.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:33.159Z,1478898033.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:33.572Z,1478898033.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:33.609Z,1478898033.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:33.965Z,1478898033.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:33.984Z,1478898033.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:34.369Z,1478898034.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:34.756Z,1478898034.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:34.780Z,1478898034.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:35.152Z,1478898035.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:35.550Z,1478898035.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:35.580Z,1478898035.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:35.966Z,1478898035.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:36.024Z,1478898036.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:36.365Z,1478898036.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:36.760Z,1478898036.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:36.820Z,1478898036.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:37.158Z,1478898037.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:37.561Z,1478898037.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:37.617Z,1478898037.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:37.985Z,1478898037.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:38.361Z,1478898038.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:38.404Z,1478898038.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:38.752Z,1478898038.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:39.158Z,1478898039.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:39.200Z,1478898039.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:39.558Z,1478898039.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:39.996Z,1478898039.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:40.013Z,1478898040.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:40.365Z,1478898040.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:40.408Z,1478898040.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:40.767Z,1478898040.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:40.788Z,1478898040.788 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T21:00:40.788Z,1478898040.788 [Default:CheckIn:C.Wait] Stopped
2016-11-11T21:00:40.788Z,1478898040.788 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T21:00:40.788Z,1478898040.788 [Default:CheckIn:D] Running Loop=1
2016-11-11T21:00:41.168Z,1478898041.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:41.185Z,1478898041.185 [Default:CheckIn:D] Stopped
2016-11-11T21:00:41.185Z,1478898041.185 [Default:CheckIn:E] Running Loop=1
2016-11-11T21:00:41.204Z,1478898041.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:41.644Z,1478898041.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:41.660Z,1478898041.661 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 970.664583 min 
2016-11-11T21:00:41.661Z,1478898041.661 [Default:CheckIn:E] Stopped
2016-11-11T21:00:41.661Z,1478898041.661 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T21:00:41.661Z,1478898041.661 [Default:CheckIn] Stopped
2016-11-11T21:00:41.661Z,1478898041.661 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T21:00:41.661Z,1478898041.661 [Default:CheckIn](INFO): Running loop #94
2016-11-11T21:00:41.661Z,1478898041.661 [Default:CheckIn] Running Loop=94
2016-11-11T21:00:41.662Z,1478898041.662 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T21:00:41.662Z,1478898041.662 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T21:00:41.918Z,1478898041.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:41.989Z,1478898041.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:42.320Z,1478898042.320 [NAL9602](INFO): Powering up
2016-11-11T21:00:42.357Z,1478898042.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:42.712Z,1478898042.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:43.509Z,1478898043.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:43.928Z,1478898043.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:44.724Z,1478898044.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:45.521Z,1478898045.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:45.933Z,1478898045.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:46.005Z,1478898046.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:46.138Z,1478898046.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:46.534Z,1478898046.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:46.729Z,1478898046.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:46.944Z,1478898046.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:47.307Z,1478898047.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:47.525Z,1478898047.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:47.719Z,1478898047.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:47.940Z,1478898047.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:48.122Z,1478898048.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:48.510Z,1478898048.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:48.737Z,1478898048.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:48.916Z,1478898048.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:49.314Z,1478898049.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:49.532Z,1478898049.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:49.716Z,1478898049.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:50.004Z,1478898050.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:50.119Z,1478898050.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:50.520Z,1478898050.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:50.800Z,1478898050.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:50.916Z,1478898050.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:51.319Z,1478898051.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:51.596Z,1478898051.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:51.721Z,1478898051.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:52.116Z,1478898052.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:52.392Z,1478898052.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:52.526Z,1478898052.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:52.923Z,1478898052.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:53.188Z,1478898053.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:53.269Z,1478898053.269 [NAL9602](INFO): NAL9602 initialized
2016-11-11T21:00:53.325Z,1478898053.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:53.700Z,1478898053.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:53.985Z,1478898053.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:54.069Z,1478898054.069 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T21:00:54.069Z,1478898054.069 [NAL9602] Data Fault, FailCount= 2
2016-11-11T21:00:54.069Z,1478898054.069 [NAL9602](ERROR): Data Fault
2016-11-11T21:00:54.117Z,1478898054.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:54.151Z,1478898054.151 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T21:00:54.396Z,1478898054.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:54.477Z,1478898054.477 [NAL9602](INFO): Powering down
2016-11-11T21:00:54.525Z,1478898054.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:54.919Z,1478898054.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:55.192Z,1478898055.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:55.316Z,1478898055.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:55.335Z,1478898055.335 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T21:00:55.335Z,1478898055.335 [NAL9602] No Fault, FailCount= 2
2016-11-11T21:00:55.706Z,1478898055.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:55.892Z,1478898055.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:56.108Z,1478898056.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:56.513Z,1478898056.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:56.688Z,1478898056.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:56.907Z,1478898056.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:57.317Z,1478898057.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:57.485Z,1478898057.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:57.713Z,1478898057.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:57.908Z,1478898057.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:58.108Z,1478898058.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:58.511Z,1478898058.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:58.704Z,1478898058.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:58.977Z,1478898058.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:59.325Z,1478898059.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:59.501Z,1478898059.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:00:59.684Z,1478898059.684 [NAL9602](INFO): Powering up NAL9602
2016-11-11T21:00:59.757Z,1478898059.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:00:59.916Z,1478898059.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:00.130Z,1478898060.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:00.573Z,1478898060.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:00.712Z,1478898060.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:00.905Z,1478898060.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:01.331Z,1478898061.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:01.508Z,1478898061.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:01.731Z,1478898061.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:01.928Z,1478898061.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:02.107Z,1478898062.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:02.509Z,1478898062.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:02.728Z,1478898062.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:02.908Z,1478898062.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:03.317Z,1478898063.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:03.524Z,1478898063.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:03.712Z,1478898063.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:03.988Z,1478898063.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:04.115Z,1478898064.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:04.513Z,1478898064.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:04.786Z,1478898064.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:04.913Z,1478898064.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:05.308Z,1478898065.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:05.580Z,1478898065.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:05.712Z,1478898065.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:06.117Z,1478898066.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:06.344Z,1478898066.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:06.511Z,1478898066.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:06.913Z,1478898066.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:07.140Z,1478898067.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:07.311Z,1478898067.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:07.711Z,1478898067.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:07.937Z,1478898067.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:08.118Z,1478898068.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:08.352Z,1478898068.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:08.517Z,1478898068.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:08.910Z,1478898068.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:09.148Z,1478898069.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:09.315Z,1478898069.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:09.717Z,1478898069.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:09.868Z,1478898069.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:10.109Z,1478898070.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:10.524Z,1478898070.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:10.664Z,1478898070.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:10.869Z,1478898070.869 [NAL9602](INFO): NAL9602 initialized
2016-11-11T21:01:10.921Z,1478898070.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:11.321Z,1478898071.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:11.461Z,1478898071.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:11.727Z,1478898071.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:11.872Z,1478898071.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:12.130Z,1478898072.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:12.531Z,1478898072.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:12.668Z,1478898072.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:12.929Z,1478898072.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:13.357Z,1478898073.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:13.465Z,1478898073.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:13.729Z,1478898073.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:13.884Z,1478898073.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:14.129Z,1478898074.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:14.550Z,1478898074.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:14.680Z,1478898074.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:14.925Z,1478898074.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:15.337Z,1478898075.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:15.477Z,1478898075.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:15.709Z,1478898075.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:15.709Z,1478898075.709 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 303
2016-11-11T21:01:15.709Z,1478898075.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T21:01:15.716Z,1478898075.716 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:15.716Z,1478898075.716 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 303
2016-11-11T21:01:15.716Z,1478898075.716 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T21:01:15.718Z,1478898075.718 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:15.718Z,1478898075.718 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 303
2016-11-11T21:01:15.719Z,1478898075.718 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:01:15.745Z,1478898075.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T21:01:15.745Z,1478898075.745 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T21:01:15.745Z,1478898075.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:01:15.888Z,1478898075.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:16.174Z,1478898076.174 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T21:01:16.174Z,1478898076.174 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 303
2016-11-11T21:01:16.175Z,1478898076.175 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T21:01:16.175Z,1478898076.175 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 303
2016-11-11T21:01:16.191Z,1478898076.191 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:01:16.192Z,1478898076.192 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 303
2016-11-11T21:01:16.508Z,1478898076.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T21:01:16.508Z,1478898076.509 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:01:16.509Z,1478898076.509 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:01:16.513Z,1478898076.513 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T21:01:16.514Z,1478898076.514 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:01:16.514Z,1478898076.514 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:01:16.515Z,1478898076.515 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:01:16.516Z,1478898076.516 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:01:16.516Z,1478898076.516 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:01:16.684Z,1478898076.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:16.919Z,1478898076.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:17.312Z,1478898077.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:17.480Z,1478898077.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:17.717Z,1478898077.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:17.968Z,1478898077.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:18.113Z,1478898078.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:18.509Z,1478898078.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:18.764Z,1478898078.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:18.924Z,1478898078.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:19.325Z,1478898079.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:19.560Z,1478898079.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:19.732Z,1478898079.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:20.128Z,1478898080.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:20.324Z,1478898080.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:20.529Z,1478898080.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:20.901Z,1478898080.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:21.120Z,1478898081.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:21.325Z,1478898081.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:21.733Z,1478898081.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:21.917Z,1478898081.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:22.115Z,1478898082.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:22.328Z,1478898082.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:22.517Z,1478898082.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:22.909Z,1478898082.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:23.124Z,1478898083.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:23.308Z,1478898083.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:23.721Z,1478898083.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:23.848Z,1478898083.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:24.125Z,1478898084.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:24.529Z,1478898084.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:24.645Z,1478898084.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:24.930Z,1478898084.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:25.311Z,1478898085.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:25.441Z,1478898085.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:25.701Z,1478898085.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:26.109Z,1478898086.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:26.232Z,1478898086.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:26.505Z,1478898086.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:26.908Z,1478898086.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:27.030Z,1478898087.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:27.313Z,1478898087.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:27.713Z,1478898087.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:27.824Z,1478898087.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:28.165Z,1478898088.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:28.232Z,1478898088.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:28.525Z,1478898088.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:28.937Z,1478898088.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:29.028Z,1478898089.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:29.324Z,1478898089.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:29.753Z,1478898089.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:29.824Z,1478898089.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:30.153Z,1478898090.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:30.236Z,1478898090.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:30.515Z,1478898090.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:30.908Z,1478898090.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:31.034Z,1478898091.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:31.313Z,1478898091.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:31.713Z,1478898091.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:31.828Z,1478898091.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:32.125Z,1478898092.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:32.236Z,1478898092.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:32.518Z,1478898092.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:32.910Z,1478898092.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:33.032Z,1478898093.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:33.310Z,1478898093.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:33.718Z,1478898093.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:33.828Z,1478898093.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:34.110Z,1478898094.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:34.304Z,1478898094.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:34.522Z,1478898094.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:34.925Z,1478898094.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:35.100Z,1478898095.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:35.325Z,1478898095.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:35.723Z,1478898095.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:35.897Z,1478898095.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:36.125Z,1478898096.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:36.324Z,1478898096.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:36.516Z,1478898096.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:36.920Z,1478898096.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:37.120Z,1478898097.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:37.320Z,1478898097.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:37.712Z,1478898097.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:37.824Z,1478898097.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:38.121Z,1478898098.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:38.518Z,1478898098.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:38.620Z,1478898098.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:38.920Z,1478898098.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:39.412Z,1478898099.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:39.417Z,1478898099.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:39.750Z,1478898099.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:39.840Z,1478898099.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:40.134Z,1478898100.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:40.554Z,1478898100.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:40.636Z,1478898100.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:40.935Z,1478898100.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:41.338Z,1478898101.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:41.433Z,1478898101.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:41.728Z,1478898101.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:41.845Z,1478898101.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:42.170Z,1478898102.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:42.531Z,1478898102.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:42.640Z,1478898102.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:43.437Z,1478898103.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:43.848Z,1478898103.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:44.644Z,1478898104.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:45.440Z,1478898105.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:45.928Z,1478898105.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:46.724Z,1478898106.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:47.520Z,1478898107.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:48.296Z,1478898108.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:48.876Z,1478898108.876 [BPC1](ERROR): Failed to receive battery data
2016-11-11T21:01:48.876Z,1478898108.876 [BPC1] Communications Fault, FailCount= 1
2016-11-11T21:01:48.876Z,1478898108.876 [BPC1](ERROR): Communications Fault
2016-11-11T21:01:48.885Z,1478898108.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:48.953Z,1478898108.953 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T21:01:49.030Z,1478898109.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:49.092Z,1478898109.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:49.451Z,1478898109.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:49.818Z,1478898109.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:49.889Z,1478898109.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:49.918Z,1478898109.918 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:01:49.918Z,1478898109.918 [BPC1] No Fault, FailCount= 1
2016-11-11T21:01:50.295Z,1478898110.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:50.312Z,1478898110.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:50.605Z,1478898110.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:51.043Z,1478898111.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:51.108Z,1478898111.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:51.510Z,1478898111.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:51.825Z,1478898111.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:51.853Z,1478898111.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:52.205Z,1478898112.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:52.616Z,1478898112.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:52.648Z,1478898112.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:53.041Z,1478898113.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:53.444Z,1478898113.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:53.514Z,1478898113.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:53.834Z,1478898113.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:53.912Z,1478898113.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:54.241Z,1478898114.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:54.637Z,1478898114.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:54.708Z,1478898114.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:55.023Z,1478898115.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:55.479Z,1478898115.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:55.504Z,1478898115.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:55.816Z,1478898115.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:55.912Z,1478898115.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:56.225Z,1478898116.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:56.625Z,1478898116.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:56.708Z,1478898116.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:57.025Z,1478898117.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:57.496Z,1478898117.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:57.512Z,1478898117.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:57.875Z,1478898117.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:57.924Z,1478898117.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:58.238Z,1478898118.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:58.610Z,1478898118.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:58.720Z,1478898118.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:59.069Z,1478898119.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:59.442Z,1478898119.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:59.517Z,1478898119.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:01:59.847Z,1478898119.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:01:59.928Z,1478898119.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:00.237Z,1478898120.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:00.640Z,1478898120.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:00.724Z,1478898120.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:01.028Z,1478898121.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:01.421Z,1478898121.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:01.520Z,1478898121.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:01.904Z,1478898121.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:02.236Z,1478898122.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:02.300Z,1478898122.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:02.627Z,1478898122.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:03.058Z,1478898123.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:03.096Z,1478898123.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:03.428Z,1478898123.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:03.876Z,1478898123.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:03.896Z,1478898123.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:04.270Z,1478898124.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:04.304Z,1478898124.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:04.650Z,1478898124.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:05.045Z,1478898125.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:05.100Z,1478898125.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:05.520Z,1478898125.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:05.835Z,1478898125.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:05.848Z,1478898125.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:06.245Z,1478898126.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:06.644Z,1478898126.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:06.648Z,1478898126.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:07.028Z,1478898127.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:07.440Z,1478898127.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:07.479Z,1478898127.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:07.836Z,1478898127.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:07.848Z,1478898127.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:08.232Z,1478898128.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:08.644Z,1478898128.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:08.647Z,1478898128.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:09.013Z,1478898129.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:09.427Z,1478898129.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:09.441Z,1478898129.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:09.818Z,1478898129.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:09.848Z,1478898129.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:10.236Z,1478898130.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:10.623Z,1478898130.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:10.644Z,1478898130.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:11.048Z,1478898131.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:11.440Z,1478898131.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:11.492Z,1478898131.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:11.838Z,1478898131.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:11.848Z,1478898131.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:12.212Z,1478898132.212 [PNI_TCM](ERROR): CRC does not match. Expected:0x30415 got:0x1857
2016-11-11T21:02:12.242Z,1478898132.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:12.640Z,1478898132.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:12.644Z,1478898132.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:13.002Z,1478898133.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:13.440Z,1478898133.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:13.489Z,1478898133.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:13.839Z,1478898133.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:13.880Z,1478898133.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:14.251Z,1478898134.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:14.680Z,1478898134.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:14.683Z,1478898134.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:15.021Z,1478898135.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:15.424Z,1478898135.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:15.476Z,1478898135.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:15.922Z,1478898135.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:16.240Z,1478898136.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:16.250Z,1478898136.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:16.609Z,1478898136.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:17.036Z,1478898137.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:17.053Z,1478898137.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:17.431Z,1478898137.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:17.833Z,1478898137.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:17.901Z,1478898137.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:18.234Z,1478898138.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:18.244Z,1478898138.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:18.616Z,1478898138.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:19.040Z,1478898139.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:19.043Z,1478898139.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:19.424Z,1478898139.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:19.756Z,1478898139.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:19.829Z,1478898139.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:20.200Z,1478898140.200 [PNI_TCM](ERROR): CRC does not match. Expected:0x35633 got:0x21
2016-11-11T21:02:20.219Z,1478898140.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:20.552Z,1478898140.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:20.629Z,1478898140.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:21.014Z,1478898141.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:21.349Z,1478898141.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:21.454Z,1478898141.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:21.760Z,1478898141.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:21.825Z,1478898141.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:22.222Z,1478898142.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:22.556Z,1478898142.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:22.623Z,1478898142.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:23.037Z,1478898143.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:23.353Z,1478898143.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:23.445Z,1478898143.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:23.772Z,1478898143.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:23.841Z,1478898143.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:24.208Z,1478898144.208 [PNI_TCM](ERROR): CRC does not match. Expected:0x35273 got:0x60167
2016-11-11T21:02:24.240Z,1478898144.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:24.568Z,1478898144.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:24.622Z,1478898144.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:25.010Z,1478898145.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:25.365Z,1478898145.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:25.456Z,1478898145.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:25.778Z,1478898145.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:25.820Z,1478898145.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:26.218Z,1478898146.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:26.572Z,1478898146.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:26.620Z,1478898146.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:27.025Z,1478898147.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:27.368Z,1478898147.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:27.454Z,1478898147.454 [PNI_TCM](ERROR): CRC does not match. Expected:0x24663 got:0x7361
2016-11-11T21:02:27.486Z,1478898147.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:27.822Z,1478898147.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:27.852Z,1478898147.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:28.230Z,1478898148.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:28.626Z,1478898148.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:28.652Z,1478898148.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:29.083Z,1478898149.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:29.427Z,1478898149.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:29.448Z,1478898149.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:29.926Z,1478898149.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:30.216Z,1478898150.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:30.230Z,1478898150.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:30.654Z,1478898150.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:31.012Z,1478898151.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:31.018Z,1478898151.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:31.454Z,1478898151.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:31.814Z,1478898151.814 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:31.862Z,1478898151.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:32.244Z,1478898152.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:32.246Z,1478898152.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:32.641Z,1478898152.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:33.013Z,1478898153.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:33.040Z,1478898153.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:33.418Z,1478898153.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:33.732Z,1478898153.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:33.816Z,1478898153.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:34.211Z,1478898154.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:34.528Z,1478898154.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:34.612Z,1478898154.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:35.025Z,1478898155.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:35.325Z,1478898155.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:35.422Z,1478898155.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:35.736Z,1478898155.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:35.826Z,1478898155.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:36.227Z,1478898156.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:36.532Z,1478898156.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:36.603Z,1478898156.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:37.002Z,1478898157.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:37.329Z,1478898157.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:37.418Z,1478898157.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:37.740Z,1478898157.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:37.836Z,1478898157.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:38.217Z,1478898158.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:38.536Z,1478898158.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:38.618Z,1478898158.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:39.021Z,1478898159.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:39.333Z,1478898159.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:39.426Z,1478898159.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:39.748Z,1478898159.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:39.815Z,1478898159.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:40.229Z,1478898160.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:40.544Z,1478898160.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:40.609Z,1478898160.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:41.013Z,1478898161.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:41.340Z,1478898161.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:41.471Z,1478898161.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:41.814Z,1478898161.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:41.852Z,1478898161.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:42.221Z,1478898162.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:42.621Z,1478898162.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:42.648Z,1478898162.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:43.446Z,1478898163.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:44.208Z,1478898164.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:45.004Z,1478898165.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:45.801Z,1478898165.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:46.193Z,1478898166.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:46.212Z,1478898166.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:46.324Z,1478898166.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:46.693Z,1478898166.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:47.008Z,1478898167.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:47.123Z,1478898167.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:47.489Z,1478898167.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:47.712Z,1478898167.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:47.933Z,1478898167.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:48.298Z,1478898168.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:48.508Z,1478898168.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:48.738Z,1478898168.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:49.099Z,1478898169.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:49.305Z,1478898169.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:49.498Z,1478898169.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:49.716Z,1478898169.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:49.897Z,1478898169.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:50.293Z,1478898170.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:50.512Z,1478898170.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:50.692Z,1478898170.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:51.105Z,1478898171.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:51.309Z,1478898171.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:51.510Z,1478898171.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:51.720Z,1478898171.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:51.881Z,1478898171.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:52.285Z,1478898172.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:52.516Z,1478898172.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:52.686Z,1478898172.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:53.099Z,1478898173.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:53.313Z,1478898173.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:53.491Z,1478898173.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:53.724Z,1478898173.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:53.901Z,1478898173.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:54.294Z,1478898174.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:54.520Z,1478898174.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:54.713Z,1478898174.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:55.086Z,1478898175.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:55.316Z,1478898175.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:55.493Z,1478898175.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:55.812Z,1478898175.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:55.896Z,1478898175.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:56.291Z,1478898176.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:56.608Z,1478898176.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:56.694Z,1478898176.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:57.096Z,1478898177.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:57.404Z,1478898177.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:57.497Z,1478898177.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:57.903Z,1478898177.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:58.164Z,1478898178.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:58.315Z,1478898178.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:58.685Z,1478898178.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:58.960Z,1478898178.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:59.085Z,1478898179.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:59.521Z,1478898179.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:02:59.757Z,1478898179.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:02:59.893Z,1478898179.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:00.168Z,1478898180.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:00.296Z,1478898180.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:00.733Z,1478898180.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:00.964Z,1478898180.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:01.109Z,1478898181.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:01.537Z,1478898181.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:01.680Z,1478898181.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:01.894Z,1478898181.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:02.322Z,1478898182.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:02.477Z,1478898182.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:02.709Z,1478898182.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:03.096Z,1478898183.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:03.273Z,1478898183.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:03.498Z,1478898183.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:03.688Z,1478898183.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:03.897Z,1478898183.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:04.296Z,1478898184.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:04.484Z,1478898184.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:04.700Z,1478898184.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:05.097Z,1478898185.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:05.289Z,1478898185.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:05.496Z,1478898185.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:05.704Z,1478898185.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:05.907Z,1478898185.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:06.281Z,1478898186.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:06.500Z,1478898186.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:06.705Z,1478898186.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:07.089Z,1478898187.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:07.297Z,1478898187.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:07.511Z,1478898187.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:07.708Z,1478898187.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:07.889Z,1478898187.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:08.287Z,1478898188.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:08.504Z,1478898188.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:08.692Z,1478898188.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:09.098Z,1478898189.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:09.300Z,1478898189.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:09.502Z,1478898189.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:09.780Z,1478898189.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:09.903Z,1478898189.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:10.294Z,1478898190.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:10.577Z,1478898190.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:10.696Z,1478898190.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:11.093Z,1478898191.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:11.374Z,1478898191.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:11.490Z,1478898191.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:11.901Z,1478898191.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:12.140Z,1478898192.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:12.296Z,1478898192.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:12.701Z,1478898192.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:12.938Z,1478898192.938 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:13.105Z,1478898193.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:13.517Z,1478898193.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:13.733Z,1478898193.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:13.902Z,1478898193.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:14.152Z,1478898194.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:14.308Z,1478898194.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:14.688Z,1478898194.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:14.948Z,1478898194.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:15.129Z,1478898195.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:15.497Z,1478898195.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:15.660Z,1478898195.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:15.930Z,1478898195.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:16.301Z,1478898196.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:16.456Z,1478898196.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:16.710Z,1478898196.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:17.113Z,1478898197.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:17.253Z,1478898197.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:17.497Z,1478898197.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:17.664Z,1478898197.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:17.905Z,1478898197.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:18.310Z,1478898198.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:18.460Z,1478898198.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:18.709Z,1478898198.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:19.110Z,1478898199.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:19.268Z,1478898199.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:19.517Z,1478898199.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:19.700Z,1478898199.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:19.905Z,1478898199.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:20.285Z,1478898200.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:20.499Z,1478898200.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:20.684Z,1478898200.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:21.093Z,1478898201.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:21.296Z,1478898201.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:21.492Z,1478898201.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:21.705Z,1478898201.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:21.888Z,1478898201.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:22.292Z,1478898202.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:22.500Z,1478898202.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:22.693Z,1478898202.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:23.103Z,1478898203.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:23.296Z,1478898203.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:23.498Z,1478898203.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:23.752Z,1478898203.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:23.898Z,1478898203.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:24.301Z,1478898204.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:24.548Z,1478898204.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:24.696Z,1478898204.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:25.101Z,1478898205.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:25.344Z,1478898205.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:25.506Z,1478898205.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:25.909Z,1478898205.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:26.112Z,1478898206.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:26.301Z,1478898206.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:26.710Z,1478898206.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:26.908Z,1478898206.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:27.105Z,1478898207.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:27.513Z,1478898207.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:27.705Z,1478898207.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:27.940Z,1478898207.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:28.116Z,1478898208.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:28.297Z,1478898208.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:28.688Z,1478898208.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:28.914Z,1478898208.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:29.129Z,1478898209.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:29.505Z,1478898209.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:29.644Z,1478898209.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:29.918Z,1478898209.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:30.288Z,1478898210.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:30.440Z,1478898210.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:30.722Z,1478898210.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:31.137Z,1478898211.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:31.237Z,1478898211.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:31.502Z,1478898211.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:31.648Z,1478898211.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:31.908Z,1478898211.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:32.313Z,1478898212.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:32.444Z,1478898212.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:32.710Z,1478898212.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:33.097Z,1478898213.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:33.241Z,1478898213.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:33.513Z,1478898213.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:33.660Z,1478898213.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:33.888Z,1478898213.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:34.288Z,1478898214.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:34.456Z,1478898214.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:34.693Z,1478898214.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:35.097Z,1478898215.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:35.253Z,1478898215.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:35.491Z,1478898215.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:35.665Z,1478898215.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:35.895Z,1478898215.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:36.325Z,1478898216.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:36.460Z,1478898216.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:36.703Z,1478898216.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:37.105Z,1478898217.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:37.256Z,1478898217.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:37.512Z,1478898217.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:37.748Z,1478898217.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:37.906Z,1478898217.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:38.285Z,1478898218.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:38.544Z,1478898218.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:38.688Z,1478898218.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:39.093Z,1478898219.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:39.340Z,1478898219.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:39.492Z,1478898219.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:39.888Z,1478898219.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:40.088Z,1478898220.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:40.298Z,1478898220.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:40.688Z,1478898220.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:40.884Z,1478898220.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:41.095Z,1478898221.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:41.490Z,1478898221.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:41.681Z,1478898221.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:41.949Z,1478898221.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:42.092Z,1478898222.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:42.308Z,1478898222.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:42.733Z,1478898222.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:42.888Z,1478898222.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:43.624Z,1478898223.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:44.420Z,1478898224.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:45.217Z,1478898225.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:45.628Z,1478898225.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:46.314Z,1478898226.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:46.424Z,1478898226.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:46.481Z,1478898226.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:46.843Z,1478898226.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:47.222Z,1478898227.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:47.309Z,1478898227.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:47.594Z,1478898227.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:47.632Z,1478898227.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:48.005Z,1478898228.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:48.403Z,1478898228.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:48.428Z,1478898228.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:48.826Z,1478898228.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:49.225Z,1478898229.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:49.255Z,1478898229.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:49.614Z,1478898229.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:49.641Z,1478898229.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:49.982Z,1478898229.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:50.393Z,1478898230.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:50.436Z,1478898230.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:50.788Z,1478898230.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:51.197Z,1478898231.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:51.232Z,1478898231.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:51.601Z,1478898231.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:51.712Z,1478898231.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:52.002Z,1478898232.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:52.398Z,1478898232.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:52.508Z,1478898232.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:52.800Z,1478898232.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:53.193Z,1478898233.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:53.304Z,1478898233.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:53.596Z,1478898233.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:53.994Z,1478898233.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:54.068Z,1478898234.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:54.378Z,1478898234.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:54.799Z,1478898234.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:54.865Z,1478898234.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:55.209Z,1478898235.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:55.597Z,1478898235.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:55.661Z,1478898235.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:56.000Z,1478898236.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:56.072Z,1478898236.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:56.400Z,1478898236.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:56.809Z,1478898236.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:56.868Z,1478898236.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:57.285Z,1478898237.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:57.590Z,1478898237.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:57.628Z,1478898237.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:58.006Z,1478898238.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:58.396Z,1478898238.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:58.424Z,1478898238.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:58.838Z,1478898238.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:59.222Z,1478898239.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:59.269Z,1478898239.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:03:59.632Z,1478898239.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:03:59.634Z,1478898239.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:00.073Z,1478898240.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:00.405Z,1478898240.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:00.428Z,1478898240.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:00.794Z,1478898240.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:01.224Z,1478898241.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:01.249Z,1478898241.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:01.608Z,1478898241.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:01.632Z,1478898241.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:01.996Z,1478898241.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:02.394Z,1478898242.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:02.428Z,1478898242.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:02.805Z,1478898242.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:03.224Z,1478898243.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:03.254Z,1478898243.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:03.636Z,1478898243.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:03.640Z,1478898243.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:03.986Z,1478898243.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:04.397Z,1478898244.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:04.432Z,1478898244.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:04.799Z,1478898244.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:05.229Z,1478898245.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:05.239Z,1478898245.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:05.593Z,1478898245.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:05.724Z,1478898245.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:05.997Z,1478898245.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:06.391Z,1478898246.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:06.520Z,1478898246.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:06.797Z,1478898246.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:07.194Z,1478898247.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:07.316Z,1478898247.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:07.647Z,1478898247.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:08.015Z,1478898248.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:08.064Z,1478898248.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:08.386Z,1478898248.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:08.797Z,1478898248.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:08.860Z,1478898248.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:09.192Z,1478898249.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:09.593Z,1478898249.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:09.656Z,1478898249.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:09.981Z,1478898249.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:10.068Z,1478898250.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:10.397Z,1478898250.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:10.826Z,1478898250.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:10.864Z,1478898250.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:11.252Z,1478898251.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:11.590Z,1478898251.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:11.613Z,1478898251.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:12.012Z,1478898252.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:12.400Z,1478898252.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:12.408Z,1478898252.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:12.807Z,1478898252.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:13.205Z,1478898253.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:13.249Z,1478898253.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:13.613Z,1478898253.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:13.616Z,1478898253.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:13.996Z,1478898253.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:14.386Z,1478898254.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:14.428Z,1478898254.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:14.793Z,1478898254.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:15.224Z,1478898255.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:15.237Z,1478898255.237 [BPC1](ERROR): Failed to receive battery data
2016-11-11T21:04:15.237Z,1478898255.237 [BPC1] Communications Fault, FailCount= 1
2016-11-11T21:04:15.237Z,1478898255.237 [BPC1](ERROR): Communications Fault
2016-11-11T21:04:15.252Z,1478898255.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:15.301Z,1478898255.300 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T21:04:15.599Z,1478898255.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:15.632Z,1478898255.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:16.003Z,1478898256.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:16.417Z,1478898256.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:16.436Z,1478898256.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:16.478Z,1478898256.478 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:04:16.478Z,1478898256.478 [BPC1] No Fault, FailCount= 1
2016-11-11T21:04:16.873Z,1478898256.873 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:16.873Z,1478898256.873 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 304
2016-11-11T21:04:16.873Z,1478898256.874 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T21:04:16.880Z,1478898256.880 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:16.880Z,1478898256.880 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 304
2016-11-11T21:04:16.881Z,1478898256.881 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T21:04:16.882Z,1478898256.882 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:16.883Z,1478898256.883 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 304
2016-11-11T21:04:16.883Z,1478898256.883 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:04:16.926Z,1478898256.926 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T21:04:16.926Z,1478898256.926 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T21:04:16.926Z,1478898256.926 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:04:17.236Z,1478898257.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:17.270Z,1478898257.270 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T21:04:17.270Z,1478898257.270 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 304
2016-11-11T21:04:17.270Z,1478898257.270 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T21:04:17.271Z,1478898257.270 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 304
2016-11-11T21:04:17.287Z,1478898257.287 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:04:17.287Z,1478898257.287 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 304
2016-11-11T21:04:17.595Z,1478898257.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T21:04:17.595Z,1478898257.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:04:17.596Z,1478898257.596 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:04:17.601Z,1478898257.601 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T21:04:17.601Z,1478898257.601 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:04:17.601Z,1478898257.602 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:04:17.602Z,1478898257.602 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:04:17.602Z,1478898257.602 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:04:17.603Z,1478898257.603 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:04:17.644Z,1478898257.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:18.006Z,1478898258.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:18.410Z,1478898258.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:18.440Z,1478898258.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:18.805Z,1478898258.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:19.213Z,1478898259.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:19.245Z,1478898259.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:19.612Z,1478898259.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:19.688Z,1478898259.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:20.005Z,1478898260.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:20.434Z,1478898260.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:20.484Z,1478898260.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:20.797Z,1478898260.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:21.197Z,1478898261.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:21.280Z,1478898261.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:21.664Z,1478898261.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:22.039Z,1478898262.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:22.056Z,1478898262.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:22.396Z,1478898262.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:22.799Z,1478898262.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:22.852Z,1478898262.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:23.199Z,1478898263.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:23.649Z,1478898263.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:23.655Z,1478898263.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:23.993Z,1478898263.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:24.060Z,1478898264.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:24.390Z,1478898264.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:24.801Z,1478898264.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:24.856Z,1478898264.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:25.253Z,1478898265.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:25.596Z,1478898265.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:25.600Z,1478898265.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:26.000Z,1478898266.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:26.392Z,1478898266.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:26.398Z,1478898266.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:26.799Z,1478898266.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:27.188Z,1478898267.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:27.238Z,1478898267.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:27.596Z,1478898267.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:27.617Z,1478898267.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:28.011Z,1478898268.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:28.392Z,1478898268.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:28.419Z,1478898268.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:28.785Z,1478898268.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:29.188Z,1478898269.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:29.266Z,1478898269.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:29.598Z,1478898269.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:29.600Z,1478898269.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:29.997Z,1478898269.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:30.396Z,1478898270.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:30.431Z,1478898270.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:30.799Z,1478898270.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:31.192Z,1478898271.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:31.246Z,1478898271.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:31.600Z,1478898271.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:31.621Z,1478898271.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:32.001Z,1478898272.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:32.396Z,1478898272.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:32.399Z,1478898272.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:32.798Z,1478898272.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:33.192Z,1478898273.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:33.291Z,1478898273.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:33.602Z,1478898273.602 [PNI_TCM](ERROR): CRC does not match. Expected:0x43450 got:0x32144
2016-11-11T21:04:33.637Z,1478898273.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:33.652Z,1478898273.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:33.000Z,1478898274.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:34.393Z,1478898274.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:34.448Z,1478898274.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:34.799Z,1478898274.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:35.199Z,1478898275.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:35.244Z,1478898275.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:35.649Z,1478898275.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:35.984Z,1478898275.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:36.040Z,1478898276.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:36.409Z,1478898276.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:36.448Z,1478898276.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:36.808Z,1478898276.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:37.242Z,1478898277.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:37.244Z,1478898277.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:37.644Z,1478898277.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:38.008Z,1478898278.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:38.036Z,1478898278.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:38.412Z,1478898278.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:38.832Z,1478898278.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:38.865Z,1478898278.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:39.202Z,1478898279.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:39.532Z,1478898279.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:39.613Z,1478898279.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:40.004Z,1478898280.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:40.328Z,1478898280.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:40.403Z,1478898280.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:40.785Z,1478898280.785 [PNI_TCM](ERROR): CRC does not match. Expected:0x19416 got:0x16875
2016-11-11T21:04:40.813Z,1478898280.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:41.125Z,1478898281.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:41.239Z,1478898281.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:41.561Z,1478898281.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:41.609Z,1478898281.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:41.973Z,1478898281.973 [PNI_TCM](ERROR): CRC does not match. Expected:0x53971 got:0x50715
2016-11-11T21:04:42.001Z,1478898282.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:42.356Z,1478898282.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:42.399Z,1478898282.399 [PNI_TCM](ERROR): CRC does not match. Expected:0x36453 got:0x7490
2016-11-11T21:04:42.449Z,1478898282.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:42.818Z,1478898282.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:43.154Z,1478898283.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:43.564Z,1478898283.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:44.360Z,1478898284.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:45.156Z,1478898285.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:45.568Z,1478898285.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:46.229Z,1478898286.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:46.364Z,1478898286.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:46.382Z,1478898286.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:46.733Z,1478898286.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:47.160Z,1478898287.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:47.168Z,1478898287.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:47.532Z,1478898287.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:47.632Z,1478898287.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:47.957Z,1478898287.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:48.373Z,1478898288.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:48.428Z,1478898288.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:48.738Z,1478898288.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:49.126Z,1478898289.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:49.224Z,1478898289.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:49.530Z,1478898289.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:49.941Z,1478898289.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:50.016Z,1478898290.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:50.372Z,1478898290.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:50.723Z,1478898290.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:50.812Z,1478898290.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:51.125Z,1478898291.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:51.523Z,1478898291.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:51.608Z,1478898291.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:51.926Z,1478898291.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:52.016Z,1478898292.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:52.333Z,1478898292.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:52.747Z,1478898292.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:52.812Z,1478898292.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:53.194Z,1478898293.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:53.514Z,1478898293.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:53.573Z,1478898293.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:53.933Z,1478898293.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:54.308Z,1478898294.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:54.326Z,1478898294.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:54.728Z,1478898294.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:55.105Z,1478898295.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:55.198Z,1478898295.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:55.524Z,1478898295.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:55.538Z,1478898295.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:55.922Z,1478898295.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:56.320Z,1478898296.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:56.324Z,1478898296.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:56.724Z,1478898296.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:57.117Z,1478898297.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:57.171Z,1478898297.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:57.541Z,1478898297.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:57.555Z,1478898297.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:57.945Z,1478898297.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:58.349Z,1478898298.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:58.354Z,1478898298.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:58.775Z,1478898298.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:59.149Z,1478898299.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:59.179Z,1478898299.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:59.557Z,1478898299.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:04:59.564Z,1478898299.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:04:59.939Z,1478898299.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:00.342Z,1478898300.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:00.360Z,1478898300.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:00.726Z,1478898300.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:01.133Z,1478898301.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:01.178Z,1478898301.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:01.550Z,1478898301.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:01.620Z,1478898301.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:01.921Z,1478898301.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:02.348Z,1478898302.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:02.416Z,1478898302.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:02.759Z,1478898302.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:03.120Z,1478898303.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:03.212Z,1478898303.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:03.588Z,1478898303.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:03.927Z,1478898303.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:03.988Z,1478898303.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:04.327Z,1478898304.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:04.735Z,1478898304.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:04.784Z,1478898304.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:05.133Z,1478898305.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:05.581Z,1478898305.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:05.594Z,1478898305.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:05.939Z,1478898305.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:05.992Z,1478898305.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:06.328Z,1478898306.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:06.729Z,1478898306.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:06.788Z,1478898306.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:07.149Z,1478898307.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:07.539Z,1478898307.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:07.540Z,1478898307.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:07.943Z,1478898307.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:08.336Z,1478898308.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:08.342Z,1478898308.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:08.743Z,1478898308.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:09.132Z,1478898309.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:09.176Z,1478898309.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:09.537Z,1478898309.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:09.540Z,1478898309.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:09.942Z,1478898309.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:10.332Z,1478898310.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:10.337Z,1478898310.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:10.732Z,1478898310.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:11.132Z,1478898311.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:11.172Z,1478898311.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:11.541Z,1478898311.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:11.543Z,1478898311.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:11.945Z,1478898311.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:12.322Z,1478898312.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:12.336Z,1478898312.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:12.725Z,1478898312.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:13.132Z,1478898313.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:13.166Z,1478898313.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:13.544Z,1478898313.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:13.546Z,1478898313.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:13.937Z,1478898313.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:14.332Z,1478898314.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:14.340Z,1478898314.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:14.747Z,1478898314.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:15.136Z,1478898315.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:15.199Z,1478898315.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:15.540Z,1478898315.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:15.616Z,1478898315.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:15.963Z,1478898315.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:16.362Z,1478898316.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:16.412Z,1478898316.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:16.760Z,1478898316.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:17.170Z,1478898317.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:17.208Z,1478898317.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:17.617Z,1478898317.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:17.942Z,1478898317.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:17.960Z,1478898317.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:18.345Z,1478898318.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:18.731Z,1478898318.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:18.764Z,1478898318.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:19.131Z,1478898319.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:19.565Z,1478898319.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:19.589Z,1478898319.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:19.949Z,1478898319.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:19.976Z,1478898319.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:20.332Z,1478898320.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:20.731Z,1478898320.731 [PNI_TCM](ERROR): CRC does not match. Expected:0x13756 got:0x64752
2016-11-11T21:05:20.750Z,1478898320.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:20.772Z,1478898320.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:21.163Z,1478898321.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:21.468Z,1478898321.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:21.540Z,1478898321.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:21.918Z,1478898321.918 [PNI_TCM](ERROR): CRC does not match. Expected:0x46976 got:0x49149
2016-11-11T21:05:21.966Z,1478898321.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:22.264Z,1478898322.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:22.339Z,1478898322.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:22.746Z,1478898322.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:23.061Z,1478898323.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:23.177Z,1478898323.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:23.472Z,1478898323.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:23.537Z,1478898323.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:23.910Z,1478898323.909 [PNI_TCM](ERROR): CRC does not match. Expected:0x52478 got:0x16913
2016-11-11T21:05:23.941Z,1478898323.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:24.269Z,1478898324.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:24.342Z,1478898324.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:24.732Z,1478898324.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:25.065Z,1478898325.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:25.157Z,1478898325.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:25.496Z,1478898325.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:25.542Z,1478898325.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:25.950Z,1478898325.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:26.292Z,1478898326.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:26.321Z,1478898326.321 [PNI_TCM](ERROR): CRC does not match. Expected:0x59123 got:0x7490
2016-11-11T21:05:26.350Z,1478898326.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:26.753Z,1478898326.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:27.088Z,1478898327.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:27.150Z,1478898327.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:27.500Z,1478898327.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:27.568Z,1478898327.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:27.922Z,1478898327.922 [PNI_TCM](ERROR): CRC does not match. Expected:0x51003 got:0x38172
2016-11-11T21:05:28.009Z,1478898328.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:28.297Z,1478898328.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:28.361Z,1478898328.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:28.727Z,1478898328.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:29.092Z,1478898329.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:29.204Z,1478898329.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:29.511Z,1478898329.511 [PNI_TCM](ERROR): CRC does not match. Expected:0x63031 got:0x4623
2016-11-11T21:05:29.550Z,1478898329.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:29.580Z,1478898329.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:29.981Z,1478898329.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:30.343Z,1478898330.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:30.376Z,1478898330.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:30.769Z,1478898330.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:31.137Z,1478898331.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:31.172Z,1478898331.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:31.609Z,1478898331.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:31.920Z,1478898331.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:31.950Z,1478898331.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:32.341Z,1478898332.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:32.710Z,1478898332.710 [PNI_TCM](ERROR): CRC does not match. Expected:0x46605 got:0x43081
2016-11-11T21:05:32.716Z,1478898332.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:32.765Z,1478898332.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:33.141Z,1478898333.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:33.512Z,1478898333.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:33.606Z,1478898333.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:33.926Z,1478898333.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:33.928Z,1478898333.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:34.330Z,1478898334.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:34.724Z,1478898334.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:34.726Z,1478898334.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:35.144Z,1478898335.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:35.448Z,1478898335.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:35.545Z,1478898335.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:35.945Z,1478898335.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:36.244Z,1478898336.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:36.345Z,1478898336.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:36.735Z,1478898336.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:37.041Z,1478898337.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:37.142Z,1478898337.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:37.452Z,1478898337.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:37.541Z,1478898337.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:37.918Z,1478898337.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:38.248Z,1478898338.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:38.328Z,1478898338.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:38.733Z,1478898338.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:39.052Z,1478898339.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:39.167Z,1478898339.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:39.472Z,1478898339.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:39.528Z,1478898339.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:39.936Z,1478898339.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:40.268Z,1478898340.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:40.346Z,1478898340.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:40.748Z,1478898340.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:41.065Z,1478898341.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:41.141Z,1478898341.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:41.504Z,1478898341.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:41.541Z,1478898341.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:41.919Z,1478898341.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:41.948Z,1478898341.948 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T21:00:41.7Z
2016-11-11T21:05:41.948Z,1478898341.948 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T21:05:41.948Z,1478898341.948 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T21:05:42.300Z,1478898342.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:42.370Z,1478898342.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:43.096Z,1478898343.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:43.327Z,1478898343.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:43.469Z,1478898343.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:43.556Z,1478898343.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:44.380Z,1478898344.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:45.176Z,1478898345.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:45.972Z,1478898345.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:46.380Z,1478898346.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:47.029Z,1478898347.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:47.093Z,1478898347.093 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0376.lzma
2016-11-11T21:05:47.154Z,1478898347.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:47.176Z,1478898347.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:47.557Z,1478898347.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:47.878Z,1478898347.878 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0376.lzma.bak
2016-11-11T21:05:47.878Z,1478898347.878 [DataOverHttps](INFO): SBD MOMSN=4555760
2016-11-11T21:05:47.908Z,1478898347.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:47.966Z,1478898347.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:48.704Z,1478898348.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:49.338Z,1478898349.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:49.420Z,1478898349.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:49.470Z,1478898349.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:50.216Z,1478898350.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:51.012Z,1478898351.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:51.548Z,1478898351.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:52.344Z,1478898352.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:52.839Z,1478898352.839 [PNI_TCM](ERROR): CRC does not match. Expected:0x4394 got:0x35993
2016-11-11T21:05:52.840Z,1478898352.840 [PNI_TCM](ERROR): CRC does not match. Expected:0x33865 got:0x17154
2016-11-11T21:05:52.840Z,1478898352.840 [PNI_TCM](ERROR): CRC does not match. Expected:0x4751 got:0x15469
2016-11-11T21:05:52.841Z,1478898352.841 [PNI_TCM](ERROR): CRC does not match. Expected:0x35923 got:0x19723
2016-11-11T21:05:52.841Z,1478898352.841 [PNI_TCM](ERROR): CRC does not match. Expected:0x31344 got:0x19136
2016-11-11T21:05:52.841Z,1478898352.841 [PNI_TCM](ERROR): CRC does not match. Expected:0x25330 got:0x18744
2016-11-11T21:05:52.842Z,1478898352.842 [PNI_TCM](ERROR): CRC does not match. Expected:0x19355 got:0x21015
2016-11-11T21:05:52.842Z,1478898352.842 [PNI_TCM](ERROR): CRC does not match. Expected:0x25276 got:0x23501
2016-11-11T21:05:52.906Z,1478898352.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:53.097Z,1478898353.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:53.140Z,1478898353.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:53.509Z,1478898353.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:53.548Z,1478898353.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:53.889Z,1478898353.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:54.254Z,1478898354.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:54.344Z,1478898354.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:54.665Z,1478898354.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:55.140Z,1478898355.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:55.548Z,1478898355.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:56.344Z,1478898356.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:57.140Z,1478898357.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:57.548Z,1478898357.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:58.300Z,1478898358.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:58.344Z,1478898358.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:58.373Z,1478898358.373 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0377.lzma
2016-11-11T21:05:58.453Z,1478898358.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:58.801Z,1478898358.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:59.130Z,1478898359.129 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0377.lzma.bak
2016-11-11T21:05:59.130Z,1478898359.130 [DataOverHttps](INFO): SBD MOMSN=4555762
2016-11-11T21:05:59.140Z,1478898359.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:05:59.218Z,1478898359.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:05:59.864Z,1478898359.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:00.482Z,1478898360.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:00.492Z,1478898360.492 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T21:06:00.492Z,1478898360.492 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T21:06:00.492Z,1478898360.492 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T21:06:00.634Z,1478898360.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:00.660Z,1478898360.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:01.458Z,1478898361.458 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:01.876Z,1478898361.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:02.672Z,1478898362.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:03.392Z,1478898363.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:04.137Z,1478898364.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:04.188Z,1478898364.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:04.309Z,1478898364.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:04.639Z,1478898364.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:04.984Z,1478898364.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:05.068Z,1478898365.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:05.396Z,1478898365.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:05.428Z,1478898365.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:05.847Z,1478898365.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:06.192Z,1478898366.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:06.213Z,1478898366.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:06.607Z,1478898366.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:06.992Z,1478898366.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:07.073Z,1478898367.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:07.429Z,1478898367.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:07.432Z,1478898367.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:07.838Z,1478898367.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:08.228Z,1478898368.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:08.234Z,1478898368.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:08.608Z,1478898368.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:09.024Z,1478898369.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:09.038Z,1478898369.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:09.411Z,1478898369.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:09.432Z,1478898369.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:09.822Z,1478898369.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:10.228Z,1478898370.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:10.238Z,1478898370.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:10.621Z,1478898370.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:11.004Z,1478898371.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:11.024Z,1478898371.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:11.406Z,1478898371.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:11.808Z,1478898371.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:11.820Z,1478898371.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:12.208Z,1478898372.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:12.605Z,1478898372.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:12.617Z,1478898372.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:13.006Z,1478898373.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:13.412Z,1478898373.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:13.415Z,1478898373.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:13.805Z,1478898373.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:14.173Z,1478898374.173 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T21:06:14.204Z,1478898374.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:14.208Z,1478898374.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:14.664Z,1478898374.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:14.684Z,1478898374.684 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T21:06:15.004Z,1478898375.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:15.025Z,1478898375.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:15.427Z,1478898375.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:15.800Z,1478898375.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:15.806Z,1478898375.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:16.208Z,1478898376.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:16.596Z,1478898376.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:16.604Z,1478898376.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:17.004Z,1478898377.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:17.392Z,1478898377.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:17.401Z,1478898377.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:17.808Z,1478898377.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:18.189Z,1478898378.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:18.205Z,1478898378.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:18.624Z,1478898378.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:18.986Z,1478898378.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:19.009Z,1478898379.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:19.408Z,1478898379.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:19.783Z,1478898379.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:19.784Z,1478898379.784 [NAL9602](INFO): Powering down
2016-11-11T21:06:19.825Z,1478898379.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:20.245Z,1478898380.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:20.580Z,1478898380.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:20.670Z,1478898380.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:21.006Z,1478898381.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:21.378Z,1478898381.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:21.407Z,1478898381.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:21.845Z,1478898381.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:22.172Z,1478898382.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:22.209Z,1478898382.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:22.630Z,1478898382.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:22.968Z,1478898382.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:23.037Z,1478898383.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:23.425Z,1478898383.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:23.764Z,1478898383.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:23.808Z,1478898383.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:24.275Z,1478898384.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:24.564Z,1478898384.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:24.609Z,1478898384.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:25.021Z,1478898385.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:25.364Z,1478898385.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:25.408Z,1478898385.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:25.807Z,1478898385.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:26.168Z,1478898386.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:26.203Z,1478898386.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:26.621Z,1478898386.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:26.964Z,1478898386.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:27.004Z,1478898387.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:27.421Z,1478898387.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:27.760Z,1478898387.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:27.875Z,1478898387.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:28.225Z,1478898388.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:28.344Z,1478898388.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:28.603Z,1478898388.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:28.752Z,1478898388.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:29.011Z,1478898389.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:29.160Z,1478898389.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:29.448Z,1478898389.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:29.568Z,1478898389.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:29.813Z,1478898389.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:29.976Z,1478898389.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:30.209Z,1478898390.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:30.384Z,1478898390.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:30.617Z,1478898390.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:30.792Z,1478898390.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:31.029Z,1478898391.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:31.200Z,1478898391.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:31.417Z,1478898391.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:31.608Z,1478898391.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:31.808Z,1478898391.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:32.016Z,1478898392.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:32.207Z,1478898392.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:32.424Z,1478898392.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:32.611Z,1478898392.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:33.017Z,1478898393.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:33.220Z,1478898393.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:33.396Z,1478898393.396 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2016-11-11T21:06:33.425Z,1478898393.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:33.628Z,1478898393.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:33.812Z,1478898393.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:34.201Z,1478898394.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:34.424Z,1478898394.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:34.608Z,1478898394.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:35.061Z,1478898395.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:35.221Z,1478898395.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:35.417Z,1478898395.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:35.632Z,1478898395.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:35.841Z,1478898395.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:36.222Z,1478898396.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:36.430Z,1478898396.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:36.600Z,1478898396.600 [PNI_TCM](ERROR): CRC does not match. Expected:0x63422 got:0x16384
2016-11-11T21:06:36.649Z,1478898396.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:37.044Z,1478898397.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:37.224Z,1478898397.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:37.417Z,1478898397.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:37.632Z,1478898397.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:37.812Z,1478898397.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:38.217Z,1478898398.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:38.428Z,1478898398.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:38.617Z,1478898398.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:39.080Z,1478898399.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:39.224Z,1478898399.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:39.425Z,1478898399.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:39.632Z,1478898399.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:39.820Z,1478898399.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:40.230Z,1478898400.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:40.428Z,1478898400.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:40.641Z,1478898400.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:41.008Z,1478898401.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:41.224Z,1478898401.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:41.494Z,1478898401.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:41.829Z,1478898401.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:41.848Z,1478898401.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:42.233Z,1478898402.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:42.631Z,1478898402.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:42.644Z,1478898402.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:43.044Z,1478898403.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:43.440Z,1478898403.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:43.493Z,1478898403.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:43.814Z,1478898403.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:43.848Z,1478898403.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:44.228Z,1478898404.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:44.644Z,1478898404.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:44.684Z,1478898404.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:45.046Z,1478898405.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:45.345Z,1478898405.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:45.413Z,1478898405.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:45.827Z,1478898405.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:46.140Z,1478898406.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:46.238Z,1478898406.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:46.622Z,1478898406.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:46.937Z,1478898406.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:47.038Z,1478898407.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:47.348Z,1478898407.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:47.436Z,1478898407.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:47.834Z,1478898407.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:48.144Z,1478898408.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:48.256Z,1478898408.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:48.607Z,1478898408.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:48.940Z,1478898408.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:49.060Z,1478898409.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:49.348Z,1478898409.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:49.400Z,1478898409.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:49.873Z,1478898409.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:50.144Z,1478898410.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:50.211Z,1478898410.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:50.652Z,1478898410.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:50.940Z,1478898410.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:51.052Z,1478898411.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:51.348Z,1478898411.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:51.429Z,1478898411.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:51.818Z,1478898411.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:52.146Z,1478898412.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:52.237Z,1478898412.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:52.619Z,1478898412.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:52.941Z,1478898412.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:53.085Z,1478898413.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:53.408Z,1478898413.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:53.460Z,1478898413.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:53.811Z,1478898413.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:54.230Z,1478898414.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:54.256Z,1478898414.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:54.660Z,1478898414.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:55.036Z,1478898415.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:55.060Z,1478898415.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:55.473Z,1478898415.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:55.796Z,1478898415.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:55.817Z,1478898415.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:56.225Z,1478898416.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:56.592Z,1478898416.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:56.627Z,1478898416.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:57.015Z,1478898417.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:57.391Z,1478898417.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:57.423Z,1478898417.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:57.816Z,1478898417.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:57.818Z,1478898417.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:58.228Z,1478898418.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:58.624Z,1478898418.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:58.648Z,1478898418.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:59.038Z,1478898419.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:59.296Z,1478898419.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:06:59.439Z,1478898419.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:06:59.836Z,1478898419.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:00.092Z,1478898420.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:00.245Z,1478898420.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:00.614Z,1478898420.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:00.889Z,1478898420.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:01.054Z,1478898421.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:01.302Z,1478898421.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:02.096Z,1478898422.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:02.893Z,1478898422.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:03.328Z,1478898423.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:04.125Z,1478898424.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:04.920Z,1478898424.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:05.329Z,1478898425.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:06.124Z,1478898426.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:06.920Z,1478898426.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:07.412Z,1478898427.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:08.069Z,1478898428.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:08.208Z,1478898428.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:08.221Z,1478898428.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:08.570Z,1478898428.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:08.966Z,1478898428.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:09.004Z,1478898429.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:09.449Z,1478898429.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:09.748Z,1478898429.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:09.769Z,1478898429.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:10.148Z,1478898430.148 [PNI_TCM](ERROR): CRC does not match. Expected:0x56040 got:0x16875
2016-11-11T21:07:10.197Z,1478898430.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:10.544Z,1478898430.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:10.602Z,1478898430.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:10.974Z,1478898430.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:11.340Z,1478898431.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:11.414Z,1478898431.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:11.774Z,1478898431.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:11.808Z,1478898431.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:12.186Z,1478898432.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:12.557Z,1478898432.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:12.608Z,1478898432.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:12.991Z,1478898432.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:13.276Z,1478898433.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:13.366Z,1478898433.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:13.766Z,1478898433.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:14.072Z,1478898434.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:14.162Z,1478898434.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:14.581Z,1478898434.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:14.869Z,1478898434.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:15.002Z,1478898435.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:15.280Z,1478898435.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:15.362Z,1478898435.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:15.771Z,1478898435.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:16.076Z,1478898436.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:16.185Z,1478898436.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:16.566Z,1478898436.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:16.873Z,1478898436.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:17.032Z,1478898437.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:17.284Z,1478898437.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:17.352Z,1478898437.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:17.761Z,1478898437.761 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:17.762Z,1478898437.761 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 305
2016-11-11T21:07:17.762Z,1478898437.762 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T21:07:17.768Z,1478898437.768 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:17.768Z,1478898437.768 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 305
2016-11-11T21:07:17.768Z,1478898437.768 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T21:07:17.770Z,1478898437.770 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:17.771Z,1478898437.771 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 305
2016-11-11T21:07:17.771Z,1478898437.771 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:07:17.806Z,1478898437.806 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T21:07:17.806Z,1478898437.806 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T21:07:17.807Z,1478898437.807 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:07:18.080Z,1478898438.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:18.170Z,1478898438.170 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T21:07:18.170Z,1478898438.170 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 305
2016-11-11T21:07:18.171Z,1478898438.171 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T21:07:18.171Z,1478898438.171 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 305
2016-11-11T21:07:18.171Z,1478898438.171 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:07:18.172Z,1478898438.172 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 305
2016-11-11T21:07:18.570Z,1478898438.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T21:07:18.571Z,1478898438.570 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:07:18.571Z,1478898438.571 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:07:18.576Z,1478898438.576 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T21:07:18.576Z,1478898438.576 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:07:18.576Z,1478898438.576 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:07:18.577Z,1478898438.577 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:07:18.577Z,1478898438.577 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:07:18.578Z,1478898438.578 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:07:18.877Z,1478898438.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:19.002Z,1478898439.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:19.296Z,1478898439.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:19.366Z,1478898439.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:19.761Z,1478898439.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:20.092Z,1478898440.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:20.165Z,1478898440.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:20.555Z,1478898440.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:20.888Z,1478898440.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:21.010Z,1478898441.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:21.352Z,1478898441.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:21.400Z,1478898441.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:21.751Z,1478898441.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:22.151Z,1478898442.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:22.196Z,1478898442.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:22.613Z,1478898442.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:22.961Z,1478898442.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:22.992Z,1478898442.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:23.397Z,1478898443.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:23.776Z,1478898443.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:23.782Z,1478898443.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:24.169Z,1478898444.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:24.572Z,1478898444.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:24.582Z,1478898444.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:24.985Z,1478898444.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:25.368Z,1478898445.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:25.394Z,1478898445.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:25.769Z,1478898445.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:25.776Z,1478898445.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:26.152Z,1478898446.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:26.547Z,1478898446.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:26.572Z,1478898446.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:26.957Z,1478898446.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:27.252Z,1478898447.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:27.353Z,1478898447.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:27.763Z,1478898447.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:28.048Z,1478898448.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:28.157Z,1478898448.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:28.565Z,1478898448.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:28.845Z,1478898448.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:28.963Z,1478898448.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:29.260Z,1478898449.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:29.364Z,1478898449.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:29.764Z,1478898449.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:30.056Z,1478898450.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:30.163Z,1478898450.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:30.564Z,1478898450.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:30.853Z,1478898450.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:30.978Z,1478898450.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:31.268Z,1478898451.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:31.361Z,1478898451.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:31.758Z,1478898451.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:32.064Z,1478898452.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:32.152Z,1478898452.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:32.550Z,1478898452.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:32.861Z,1478898452.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:32.954Z,1478898452.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:33.272Z,1478898453.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:33.353Z,1478898453.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:33.759Z,1478898453.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:34.068Z,1478898454.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:34.165Z,1478898454.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:34.577Z,1478898454.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:34.864Z,1478898454.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:35.014Z,1478898455.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:35.343Z,1478898455.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:35.388Z,1478898455.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:35.753Z,1478898455.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:36.177Z,1478898456.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:36.184Z,1478898456.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:36.553Z,1478898456.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:36.980Z,1478898456.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:36.985Z,1478898456.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:37.405Z,1478898457.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:37.716Z,1478898457.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:37.761Z,1478898457.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:38.160Z,1478898458.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:38.512Z,1478898458.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:38.582Z,1478898458.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:38.967Z,1478898458.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:39.309Z,1478898459.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:39.412Z,1478898459.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:39.720Z,1478898459.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:39.812Z,1478898459.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:40.164Z,1478898460.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:40.518Z,1478898460.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:40.572Z,1478898460.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:40.971Z,1478898460.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:41.216Z,1478898461.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:41.369Z,1478898461.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:41.770Z,1478898461.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:42.012Z,1478898462.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:42.166Z,1478898462.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:42.551Z,1478898462.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:42.809Z,1478898462.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:42.961Z,1478898462.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:43.220Z,1478898463.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:43.361Z,1478898463.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:43.762Z,1478898463.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:44.016Z,1478898464.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:44.163Z,1478898464.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:44.562Z,1478898464.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:44.818Z,1478898464.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:44.974Z,1478898464.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:45.248Z,1478898465.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:45.353Z,1478898465.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:45.764Z,1478898465.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:46.047Z,1478898466.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:46.165Z,1478898466.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:46.561Z,1478898466.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:46.844Z,1478898466.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:46.958Z,1478898466.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:47.257Z,1478898467.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:47.352Z,1478898467.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:47.752Z,1478898467.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:48.052Z,1478898468.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:48.151Z,1478898468.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:48.555Z,1478898468.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:48.848Z,1478898468.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:48.992Z,1478898468.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:49.328Z,1478898469.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:49.354Z,1478898469.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:49.757Z,1478898469.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:50.124Z,1478898470.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:50.167Z,1478898470.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:50.564Z,1478898470.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:50.920Z,1478898470.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:50.967Z,1478898470.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:51.364Z,1478898471.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:51.672Z,1478898471.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:51.785Z,1478898471.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:52.189Z,1478898472.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:52.468Z,1478898472.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:52.566Z,1478898472.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:52.965Z,1478898472.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:53.265Z,1478898473.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:53.370Z,1478898473.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:53.676Z,1478898473.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:53.757Z,1478898473.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:54.189Z,1478898474.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:54.472Z,1478898474.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:54.580Z,1478898474.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:54.950Z,1478898474.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:55.196Z,1478898475.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:55.356Z,1478898475.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:55.757Z,1478898475.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:55.992Z,1478898475.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:56.152Z,1478898476.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:56.550Z,1478898476.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:56.789Z,1478898476.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:56.960Z,1478898476.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:57.200Z,1478898477.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:57.352Z,1478898477.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:57.761Z,1478898477.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:57.996Z,1478898477.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:58.161Z,1478898478.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:58.554Z,1478898478.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:58.793Z,1478898478.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:58.953Z,1478898478.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:59.204Z,1478898479.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:07:59.362Z,1478898479.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:59.753Z,1478898479.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:07:59.000Z,1478898480.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:00.155Z,1478898480.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:00.562Z,1478898480.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:00.797Z,1478898480.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:00.961Z,1478898480.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:01.208Z,1478898481.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:01.361Z,1478898481.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:02.004Z,1478898482.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:02.800Z,1478898482.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:03.296Z,1478898483.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:04.092Z,1478898484.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:04.729Z,1478898484.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:04.863Z,1478898484.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:04.888Z,1478898484.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:05.308Z,1478898485.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:05.657Z,1478898485.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:05.668Z,1478898485.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:06.053Z,1478898486.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:06.464Z,1478898486.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:06.520Z,1478898486.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:06.844Z,1478898486.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:07.261Z,1478898487.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:07.314Z,1478898487.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:07.669Z,1478898487.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:07.688Z,1478898487.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:08.045Z,1478898488.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:08.477Z,1478898488.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:08.484Z,1478898488.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:08.882Z,1478898488.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:09.176Z,1478898489.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:09.257Z,1478898489.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:09.633Z,1478898489.633 [PNI_TCM](ERROR): CRC does not match. Expected:0x47974 got:0x17575
2016-11-11T21:08:09.656Z,1478898489.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:09.972Z,1478898489.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:10.061Z,1478898490.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:10.458Z,1478898490.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:10.769Z,1478898490.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:10.869Z,1478898490.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:11.208Z,1478898491.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:11.273Z,1478898491.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:11.642Z,1478898491.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:12.006Z,1478898492.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:12.075Z,1478898492.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:12.434Z,1478898492.434 [PNI_TCM](ERROR): CRC does not match. Expected:0x62392 got:0x23509
2016-11-11T21:08:12.454Z,1478898492.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:12.800Z,1478898492.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:12.882Z,1478898492.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:13.209Z,1478898493.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:13.248Z,1478898493.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:13.652Z,1478898493.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:14.006Z,1478898494.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:14.055Z,1478898494.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:14.447Z,1478898494.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:14.800Z,1478898494.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:14.870Z,1478898494.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:15.214Z,1478898495.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:15.262Z,1478898495.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:15.644Z,1478898495.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:16.009Z,1478898496.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:16.058Z,1478898496.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:16.456Z,1478898496.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:16.804Z,1478898496.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:16.928Z,1478898496.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:17.250Z,1478898497.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:17.284Z,1478898497.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:17.638Z,1478898497.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:18.040Z,1478898498.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:18.080Z,1478898498.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:18.442Z,1478898498.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:18.845Z,1478898498.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:18.876Z,1478898498.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:19.302Z,1478898499.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:19.636Z,1478898499.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:19.640Z,1478898499.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:20.045Z,1478898500.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:20.432Z,1478898500.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:20.449Z,1478898500.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:20.845Z,1478898500.845 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T21:08:20.845Z,1478898500.845 [BPC1] Data Fault, FailCount= 1
2016-11-11T21:08:20.845Z,1478898500.845 [BPC1](ERROR): Data Fault
2016-11-11T21:08:20.865Z,1478898500.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:20.911Z,1478898500.911 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T21:08:21.236Z,1478898501.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:21.317Z,1478898501.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:21.648Z,1478898501.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:21.650Z,1478898501.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:22.042Z,1478898502.042 [PNI_TCM](ERROR): CRC does not match. Expected:0x56652 got:0x36290
2016-11-11T21:08:22.065Z,1478898502.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:22.102Z,1478898502.102 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:08:22.102Z,1478898502.102 [BPC1] No Fault, FailCount= 1
2016-11-11T21:08:22.444Z,1478898502.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:22.518Z,1478898502.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:22.856Z,1478898502.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:23.156Z,1478898503.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:23.277Z,1478898503.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:23.642Z,1478898503.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:23.952Z,1478898503.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:24.050Z,1478898504.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:24.439Z,1478898504.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:24.749Z,1478898504.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:24.857Z,1478898504.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:25.160Z,1478898505.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:25.253Z,1478898505.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:25.645Z,1478898505.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:25.956Z,1478898505.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:26.045Z,1478898506.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:26.442Z,1478898506.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:26.753Z,1478898506.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:26.844Z,1478898506.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:27.164Z,1478898507.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:27.240Z,1478898507.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:27.640Z,1478898507.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:27.960Z,1478898507.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:28.053Z,1478898508.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:28.441Z,1478898508.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:28.757Z,1478898508.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:28.843Z,1478898508.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:29.168Z,1478898509.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:29.242Z,1478898509.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:29.652Z,1478898509.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:29.964Z,1478898509.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:30.042Z,1478898510.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:30.449Z,1478898510.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:30.760Z,1478898510.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:30.902Z,1478898510.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:31.246Z,1478898511.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:31.288Z,1478898511.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:31.655Z,1478898511.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:32.060Z,1478898512.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:32.092Z,1478898512.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:32.456Z,1478898512.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:32.858Z,1478898512.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:32.888Z,1478898512.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:33.299Z,1478898513.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:33.620Z,1478898513.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:33.649Z,1478898513.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:34.056Z,1478898514.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:34.416Z,1478898514.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:34.441Z,1478898514.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:34.840Z,1478898514.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:35.213Z,1478898515.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:35.338Z,1478898515.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:35.624Z,1478898515.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:35.645Z,1478898515.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:36.042Z,1478898516.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:36.424Z,1478898516.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:36.487Z,1478898516.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:36.846Z,1478898516.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:37.136Z,1478898517.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:37.288Z,1478898517.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:37.653Z,1478898517.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:37.932Z,1478898517.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:38.066Z,1478898518.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:38.449Z,1478898518.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:38.728Z,1478898518.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:38.852Z,1478898518.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:39.140Z,1478898519.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:39.252Z,1478898519.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:39.652Z,1478898519.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:39.936Z,1478898519.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:40.053Z,1478898520.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:40.432Z,1478898520.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:40.733Z,1478898520.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:40.861Z,1478898520.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:41.152Z,1478898521.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:41.260Z,1478898521.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:41.637Z,1478898521.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:41.950Z,1478898521.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:42.041Z,1478898522.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:42.444Z,1478898522.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:42.745Z,1478898522.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:42.838Z,1478898522.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:43.156Z,1478898523.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:43.245Z,1478898523.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:43.647Z,1478898523.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:43.952Z,1478898523.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:44.043Z,1478898524.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:44.440Z,1478898524.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:44.749Z,1478898524.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:44.886Z,1478898524.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:45.253Z,1478898525.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:45.264Z,1478898525.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:45.652Z,1478898525.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:46.052Z,1478898526.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:46.060Z,1478898526.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:46.452Z,1478898526.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:46.848Z,1478898526.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:46.856Z,1478898526.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:47.260Z,1478898527.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:47.621Z,1478898527.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:47.637Z,1478898527.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:48.045Z,1478898528.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:48.416Z,1478898528.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:48.442Z,1478898528.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:48.845Z,1478898528.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:49.212Z,1478898529.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:49.274Z,1478898529.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:49.620Z,1478898529.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:49.653Z,1478898529.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:50.101Z,1478898530.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:50.416Z,1478898530.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:50.461Z,1478898530.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:50.867Z,1478898530.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:51.116Z,1478898531.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:51.245Z,1478898531.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:51.678Z,1478898531.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:51.912Z,1478898531.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:52.074Z,1478898532.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:52.445Z,1478898532.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:52.709Z,1478898532.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:52.848Z,1478898532.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:53.128Z,1478898533.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:53.245Z,1478898533.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:53.649Z,1478898533.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:53.924Z,1478898533.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:54.043Z,1478898534.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:54.450Z,1478898534.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:54.720Z,1478898534.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:54.865Z,1478898534.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:55.152Z,1478898535.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:55.252Z,1478898535.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:55.651Z,1478898535.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:55.948Z,1478898535.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:56.052Z,1478898536.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:56.448Z,1478898536.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:56.744Z,1478898536.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:56.851Z,1478898536.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:57.152Z,1478898537.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:57.259Z,1478898537.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:57.632Z,1478898537.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:57.948Z,1478898537.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:58.037Z,1478898538.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:58.437Z,1478898538.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:58.744Z,1478898538.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:58.894Z,1478898538.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:59.240Z,1478898539.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:08:59.268Z,1478898539.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:08:59.645Z,1478898539.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:00.039Z,1478898540.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:00.064Z,1478898540.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:00.439Z,1478898540.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:00.839Z,1478898540.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:00.868Z,1478898540.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:01.250Z,1478898541.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:01.564Z,1478898541.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:01.645Z,1478898541.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:02.360Z,1478898542.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:03.158Z,1478898543.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:03.568Z,1478898543.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:04.364Z,1478898544.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:05.096Z,1478898545.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:05.156Z,1478898545.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:05.262Z,1478898545.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:05.660Z,1478898545.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:05.894Z,1478898545.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:06.073Z,1478898546.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:06.452Z,1478898546.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:06.692Z,1478898546.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:06.881Z,1478898546.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:07.108Z,1478898547.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:07.277Z,1478898547.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:07.643Z,1478898547.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:07.904Z,1478898547.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:08.045Z,1478898548.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:08.443Z,1478898548.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:08.701Z,1478898548.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:08.852Z,1478898548.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:09.116Z,1478898549.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:09.252Z,1478898549.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:09.653Z,1478898549.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:09.912Z,1478898549.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:10.048Z,1478898550.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:10.461Z,1478898550.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:10.708Z,1478898550.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:10.873Z,1478898550.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:11.120Z,1478898551.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:11.253Z,1478898551.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:11.652Z,1478898551.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:11.916Z,1478898551.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:12.058Z,1478898552.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:12.449Z,1478898552.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:12.712Z,1478898552.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:12.870Z,1478898552.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:13.196Z,1478898553.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:13.258Z,1478898553.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:13.656Z,1478898553.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:13.992Z,1478898553.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:14.057Z,1478898554.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:14.457Z,1478898554.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:14.788Z,1478898554.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:14.857Z,1478898554.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:15.257Z,1478898555.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:15.540Z,1478898555.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:15.657Z,1478898555.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:16.056Z,1478898556.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:16.336Z,1478898556.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:16.461Z,1478898556.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:16.868Z,1478898556.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:17.133Z,1478898557.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:17.261Z,1478898557.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:17.544Z,1478898557.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:17.665Z,1478898557.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:18.043Z,1478898558.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:18.340Z,1478898558.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:18.448Z,1478898558.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:18.852Z,1478898558.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:19.072Z,1478898559.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:19.301Z,1478898559.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:19.648Z,1478898559.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:19.868Z,1478898559.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:20.051Z,1478898560.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:20.469Z,1478898560.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:20.670Z,1478898560.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:20.855Z,1478898560.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:21.100Z,1478898561.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:21.297Z,1478898561.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:21.674Z,1478898561.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:21.896Z,1478898561.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:22.053Z,1478898562.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:22.459Z,1478898562.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:22.692Z,1478898562.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:22.856Z,1478898562.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:23.100Z,1478898563.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:23.250Z,1478898563.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:23.658Z,1478898563.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:23.896Z,1478898563.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:24.058Z,1478898564.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:24.449Z,1478898564.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:24.692Z,1478898564.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:24.859Z,1478898564.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:25.100Z,1478898565.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:25.258Z,1478898565.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:25.650Z,1478898565.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:25.896Z,1478898565.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:26.070Z,1478898566.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:26.460Z,1478898566.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:26.692Z,1478898566.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:26.874Z,1478898566.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:27.160Z,1478898567.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:27.265Z,1478898567.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:27.649Z,1478898567.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:27.956Z,1478898567.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:28.046Z,1478898568.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:28.453Z,1478898568.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:28.752Z,1478898568.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:28.853Z,1478898568.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:29.253Z,1478898569.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:29.532Z,1478898569.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:29.651Z,1478898569.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:30.053Z,1478898570.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:30.328Z,1478898570.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:30.465Z,1478898570.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:30.857Z,1478898570.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:31.125Z,1478898571.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:31.257Z,1478898571.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:31.536Z,1478898571.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:31.655Z,1478898571.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:32.061Z,1478898572.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:32.332Z,1478898572.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:32.450Z,1478898572.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:32.850Z,1478898572.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:33.048Z,1478898573.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:33.258Z,1478898573.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:33.706Z,1478898573.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:33.844Z,1478898573.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:34.052Z,1478898574.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:34.466Z,1478898574.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:34.641Z,1478898574.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:34.885Z,1478898574.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:35.056Z,1478898575.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:35.253Z,1478898575.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:35.686Z,1478898575.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:35.852Z,1478898575.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:36.047Z,1478898576.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:36.481Z,1478898576.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:36.649Z,1478898576.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:36.854Z,1478898576.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:37.060Z,1478898577.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:37.253Z,1478898577.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:37.648Z,1478898577.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:37.856Z,1478898577.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:38.047Z,1478898578.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:38.458Z,1478898578.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:38.653Z,1478898578.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:38.856Z,1478898578.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:39.064Z,1478898579.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:39.256Z,1478898579.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:39.658Z,1478898579.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:39.860Z,1478898579.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:40.050Z,1478898580.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:40.456Z,1478898580.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:40.656Z,1478898580.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:40.859Z,1478898580.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:41.148Z,1478898581.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:41.250Z,1478898581.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:41.656Z,1478898581.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:41.944Z,1478898581.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:42.049Z,1478898582.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:42.450Z,1478898582.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:42.740Z,1478898582.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:42.849Z,1478898582.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:43.265Z,1478898583.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:43.532Z,1478898583.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:43.653Z,1478898583.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:44.057Z,1478898584.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:44.328Z,1478898584.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:44.453Z,1478898584.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:44.860Z,1478898584.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:45.124Z,1478898585.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:45.259Z,1478898585.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:45.532Z,1478898585.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:45.660Z,1478898585.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:46.048Z,1478898586.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:46.328Z,1478898586.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:46.461Z,1478898586.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:46.849Z,1478898586.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:47.028Z,1478898587.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:47.244Z,1478898587.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:47.646Z,1478898587.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:47.824Z,1478898587.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:48.093Z,1478898588.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:48.493Z,1478898588.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:48.621Z,1478898588.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:48.852Z,1478898588.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:49.040Z,1478898589.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:49.290Z,1478898589.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:49.647Z,1478898589.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:49.836Z,1478898589.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:50.074Z,1478898590.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:50.474Z,1478898590.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:50.635Z,1478898590.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:50.850Z,1478898590.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:51.049Z,1478898591.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:51.253Z,1478898591.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:51.657Z,1478898591.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:51.844Z,1478898591.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:52.050Z,1478898592.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:52.449Z,1478898592.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:52.641Z,1478898592.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:52.857Z,1478898592.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:53.052Z,1478898593.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:53.250Z,1478898593.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:53.657Z,1478898593.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:53.848Z,1478898593.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:54.050Z,1478898594.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:54.450Z,1478898594.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:54.644Z,1478898594.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:54.861Z,1478898594.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:55.120Z,1478898595.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:55.253Z,1478898595.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:55.652Z,1478898595.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:55.916Z,1478898595.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:56.052Z,1478898596.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:56.460Z,1478898596.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:56.715Z,1478898596.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:56.855Z,1478898596.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:57.246Z,1478898597.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:57.484Z,1478898597.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:57.650Z,1478898597.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:58.057Z,1478898598.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:58.280Z,1478898598.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:58.452Z,1478898598.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:58.852Z,1478898598.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:59.082Z,1478898599.082 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:59.253Z,1478898599.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:09:59.524Z,1478898599.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:09:59.661Z,1478898599.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:00.050Z,1478898600.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:00.320Z,1478898600.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:00.450Z,1478898600.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:00.865Z,1478898600.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:01.004Z,1478898601.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:01.265Z,1478898601.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:01.657Z,1478898601.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:01.800Z,1478898601.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:02.597Z,1478898602.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:03.012Z,1478898603.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:03.808Z,1478898603.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:04.605Z,1478898604.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:05.016Z,1478898605.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:05.422Z,1478898605.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:05.539Z,1478898605.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:05.812Z,1478898605.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:05.924Z,1478898605.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:06.334Z,1478898606.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:06.609Z,1478898606.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:06.717Z,1478898606.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:07.020Z,1478898607.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:07.130Z,1478898607.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:07.542Z,1478898607.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:07.816Z,1478898607.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:07.908Z,1478898607.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:08.326Z,1478898608.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:08.612Z,1478898608.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:08.750Z,1478898608.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:09.108Z,1478898609.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:09.140Z,1478898609.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:09.517Z,1478898609.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:09.920Z,1478898609.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:09.944Z,1478898609.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:10.317Z,1478898610.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:10.720Z,1478898610.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:10.740Z,1478898610.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:11.144Z,1478898611.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:11.468Z,1478898611.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:11.515Z,1478898611.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:11.919Z,1478898611.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:12.264Z,1478898612.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:12.322Z,1478898612.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:12.717Z,1478898612.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:13.107Z,1478898613.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:13.131Z,1478898613.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:13.525Z,1478898613.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:13.528Z,1478898613.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:13.924Z,1478898613.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:14.324Z,1478898614.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:14.324Z,1478898614.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:14.725Z,1478898614.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:14.984Z,1478898614.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:15.118Z,1478898615.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:15.561Z,1478898615.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:15.780Z,1478898615.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:15.937Z,1478898615.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:16.321Z,1478898616.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:16.577Z,1478898616.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:16.722Z,1478898616.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:16.988Z,1478898616.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:17.127Z,1478898617.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:17.515Z,1478898617.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:17.784Z,1478898617.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:17.920Z,1478898617.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:18.329Z,1478898618.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:18.581Z,1478898618.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:18.728Z,1478898618.728 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:18.728Z,1478898618.728 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 306
2016-11-11T21:10:18.728Z,1478898618.728 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T21:10:18.734Z,1478898618.734 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:18.735Z,1478898618.735 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 306
2016-11-11T21:10:18.735Z,1478898618.735 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T21:10:18.737Z,1478898618.737 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:18.737Z,1478898618.737 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 306
2016-11-11T21:10:18.737Z,1478898618.737 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:10:18.776Z,1478898618.776 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T21:10:18.776Z,1478898618.776 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T21:10:18.776Z,1478898618.776 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:10:18.992Z,1478898618.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:19.198Z,1478898619.198 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T21:10:19.199Z,1478898619.198 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 306
2016-11-11T21:10:19.208Z,1478898619.208 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T21:10:19.208Z,1478898619.208 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 306
2016-11-11T21:10:19.209Z,1478898619.209 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:10:19.209Z,1478898619.209 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 306
2016-11-11T21:10:19.544Z,1478898619.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T21:10:19.544Z,1478898619.544 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:10:19.545Z,1478898619.545 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:10:19.549Z,1478898619.549 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T21:10:19.550Z,1478898619.550 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:10:19.550Z,1478898619.550 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:10:19.550Z,1478898619.550 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:10:19.551Z,1478898619.551 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:10:19.551Z,1478898619.551 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:10:19.788Z,1478898619.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:19.920Z,1478898619.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:20.346Z,1478898620.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:20.585Z,1478898620.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:20.745Z,1478898620.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:20.996Z,1478898620.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:21.149Z,1478898621.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:21.541Z,1478898621.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:21.792Z,1478898621.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:21.926Z,1478898621.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:22.309Z,1478898622.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:22.588Z,1478898622.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:22.752Z,1478898622.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:23.110Z,1478898623.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:23.140Z,1478898623.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:23.510Z,1478898623.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:23.909Z,1478898623.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:23.936Z,1478898623.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:24.320Z,1478898624.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:24.711Z,1478898624.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:24.732Z,1478898624.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:25.125Z,1478898625.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:25.436Z,1478898625.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:25.503Z,1478898625.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:25.925Z,1478898625.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:26.233Z,1478898626.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:26.313Z,1478898626.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:26.706Z,1478898626.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:27.029Z,1478898627.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:27.129Z,1478898627.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:27.440Z,1478898627.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:27.511Z,1478898627.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:27.922Z,1478898627.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:28.236Z,1478898628.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:28.313Z,1478898628.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:28.710Z,1478898628.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:28.964Z,1478898628.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:29.125Z,1478898629.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:29.520Z,1478898629.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:29.760Z,1478898629.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:29.914Z,1478898629.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:30.330Z,1478898630.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:30.557Z,1478898630.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:30.720Z,1478898630.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:30.968Z,1478898630.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:31.124Z,1478898631.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:31.525Z,1478898631.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:31.764Z,1478898631.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:31.942Z,1478898631.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:32.346Z,1478898632.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:32.561Z,1478898632.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:32.723Z,1478898632.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:32.972Z,1478898632.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:33.117Z,1478898633.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:33.581Z,1478898633.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:33.768Z,1478898633.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:33.929Z,1478898633.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:34.338Z,1478898634.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:34.565Z,1478898634.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:34.724Z,1478898634.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:34.976Z,1478898634.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:35.145Z,1478898635.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:35.545Z,1478898635.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:35.772Z,1478898635.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:35.957Z,1478898635.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:36.309Z,1478898636.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:36.570Z,1478898636.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:36.755Z,1478898636.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:37.056Z,1478898637.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:37.141Z,1478898637.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:37.554Z,1478898637.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:37.852Z,1478898637.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:37.916Z,1478898637.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:38.317Z,1478898638.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:38.648Z,1478898638.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:38.725Z,1478898638.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:39.110Z,1478898639.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:39.416Z,1478898639.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:39.520Z,1478898639.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:39.920Z,1478898639.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:40.212Z,1478898640.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:40.321Z,1478898640.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:40.720Z,1478898640.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:41.009Z,1478898641.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:41.112Z,1478898641.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:41.420Z,1478898641.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:41.513Z,1478898641.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:41.919Z,1478898641.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:42.216Z,1478898642.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:42.324Z,1478898642.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:42.719Z,1478898642.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:42.940Z,1478898642.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:43.120Z,1478898643.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:43.520Z,1478898643.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:43.736Z,1478898643.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:43.914Z,1478898643.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:44.331Z,1478898644.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:44.533Z,1478898644.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:44.703Z,1478898644.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:44.944Z,1478898644.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:45.109Z,1478898645.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:45.509Z,1478898645.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:45.740Z,1478898645.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:45.909Z,1478898645.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:46.308Z,1478898646.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:46.537Z,1478898646.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:46.714Z,1478898646.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:46.948Z,1478898646.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:47.113Z,1478898647.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:47.561Z,1478898647.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:47.744Z,1478898647.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:47.919Z,1478898647.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:48.323Z,1478898648.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:48.541Z,1478898648.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:48.769Z,1478898648.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:48.960Z,1478898648.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:49.137Z,1478898649.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:49.541Z,1478898649.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:49.756Z,1478898649.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:49.941Z,1478898649.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:50.323Z,1478898650.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:50.552Z,1478898650.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:50.730Z,1478898650.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:51.044Z,1478898651.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:51.116Z,1478898651.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:51.521Z,1478898651.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:51.840Z,1478898651.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:51.919Z,1478898651.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:52.356Z,1478898652.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:52.636Z,1478898652.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:52.715Z,1478898652.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:53.118Z,1478898653.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:53.396Z,1478898653.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:53.529Z,1478898653.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:53.945Z,1478898653.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:54.192Z,1478898654.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:54.320Z,1478898654.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:54.710Z,1478898654.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:54.989Z,1478898654.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:55.105Z,1478898655.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:55.400Z,1478898655.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:55.510Z,1478898655.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:55.911Z,1478898655.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:56.196Z,1478898656.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:56.308Z,1478898656.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:56.720Z,1478898656.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:56.920Z,1478898656.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:57.114Z,1478898657.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:57.510Z,1478898657.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:57.716Z,1478898657.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:57.912Z,1478898657.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:58.321Z,1478898658.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:58.513Z,1478898658.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:58.718Z,1478898658.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:58.924Z,1478898658.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:59.121Z,1478898659.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:59.520Z,1478898659.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:10:59.720Z,1478898659.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:10:59.917Z,1478898659.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:00.321Z,1478898660.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:00.517Z,1478898660.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:00.721Z,1478898660.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:00.738Z,1478898660.738 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T21:11:00.739Z,1478898660.739 [Default:CheckIn:C.Wait] Stopped
2016-11-11T21:11:00.739Z,1478898660.739 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T21:11:00.739Z,1478898660.739 [Default:CheckIn:D] Running Loop=1
2016-11-11T21:11:00.928Z,1478898660.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:01.124Z,1478898661.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:01.133Z,1478898661.133 [Default:CheckIn:D] Stopped
2016-11-11T21:11:01.133Z,1478898661.133 [Default:CheckIn:E] Running Loop=1
2016-11-11T21:11:01.502Z,1478898661.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:01.536Z,1478898661.536 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 980.997070 min 
2016-11-11T21:11:01.536Z,1478898661.536 [Default:CheckIn:E] Stopped
2016-11-11T21:11:01.536Z,1478898661.536 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T21:11:01.536Z,1478898661.536 [Default:CheckIn] Stopped
2016-11-11T21:11:01.537Z,1478898661.537 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T21:11:01.537Z,1478898661.537 [Default:CheckIn](INFO): Running loop #95
2016-11-11T21:11:01.537Z,1478898661.537 [Default:CheckIn] Running Loop=95
2016-11-11T21:11:01.537Z,1478898661.537 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T21:11:01.537Z,1478898661.537 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T21:11:01.724Z,1478898661.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:01.942Z,1478898661.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:02.521Z,1478898662.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:02.932Z,1478898662.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:03.728Z,1478898663.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:04.524Z,1478898664.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:05.020Z,1478898665.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:05.468Z,1478898665.468 [NAL9602](INFO): Powering up
2016-11-11T21:11:05.561Z,1478898665.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:05.704Z,1478898665.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:05.816Z,1478898665.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:06.076Z,1478898666.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:06.509Z,1478898666.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:06.612Z,1478898666.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:06.872Z,1478898666.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:07.301Z,1478898667.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:07.400Z,1478898667.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:07.681Z,1478898667.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:08.121Z,1478898668.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:08.196Z,1478898668.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:08.481Z,1478898668.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:08.885Z,1478898668.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:08.993Z,1478898668.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:09.289Z,1478898669.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:09.404Z,1478898669.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:09.694Z,1478898669.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:10.063Z,1478898670.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:10.200Z,1478898670.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:10.548Z,1478898670.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:10.871Z,1478898670.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:10.912Z,1478898670.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:11.273Z,1478898671.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:11.674Z,1478898671.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:11.708Z,1478898671.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:12.070Z,1478898672.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:12.505Z,1478898672.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:12.543Z,1478898672.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:12.878Z,1478898672.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:12.916Z,1478898672.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:13.280Z,1478898673.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:13.682Z,1478898673.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:13.712Z,1478898673.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:14.079Z,1478898674.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:14.508Z,1478898674.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:14.534Z,1478898674.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:14.869Z,1478898674.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:14.920Z,1478898674.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:15.276Z,1478898675.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:15.673Z,1478898675.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:15.716Z,1478898675.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:16.081Z,1478898676.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:16.433Z,1478898676.433 [NAL9602](INFO): NAL9602 initialized
2016-11-11T21:11:16.513Z,1478898676.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:16.540Z,1478898676.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:16.884Z,1478898676.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:16.924Z,1478898676.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:17.241Z,1478898677.241 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T21:11:17.241Z,1478898677.241 [NAL9602] Data Fault, FailCount= 3
2016-11-11T21:11:17.241Z,1478898677.241 [NAL9602](ERROR): Data Fault
2016-11-11T21:11:17.308Z,1478898677.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:17.343Z,1478898677.343 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T21:11:17.632Z,1478898677.632 [NAL9602](INFO): Powering down
2016-11-11T21:11:17.689Z,1478898677.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:17.720Z,1478898677.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:18.096Z,1478898678.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:18.469Z,1478898678.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:18.516Z,1478898678.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:18.529Z,1478898678.529 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T21:11:18.529Z,1478898678.529 [NAL9602] No Fault, FailCount= 3
2016-11-11T21:11:18.892Z,1478898678.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:19.008Z,1478898679.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:19.273Z,1478898679.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:19.717Z,1478898679.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:19.804Z,1478898679.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:20.120Z,1478898680.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:20.470Z,1478898680.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:20.600Z,1478898680.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:20.909Z,1478898680.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:21.297Z,1478898681.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:21.380Z,1478898681.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:21.697Z,1478898681.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:22.101Z,1478898682.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:22.176Z,1478898682.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:22.484Z,1478898682.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:22.837Z,1478898682.837 [NAL9602](INFO): Powering up NAL9602
2016-11-11T21:11:22.889Z,1478898682.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:22.972Z,1478898682.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:23.282Z,1478898683.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:23.380Z,1478898683.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:23.680Z,1478898683.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:24.088Z,1478898684.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:24.176Z,1478898684.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:24.534Z,1478898684.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:24.877Z,1478898684.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:24.913Z,1478898684.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:25.273Z,1478898685.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:25.672Z,1478898685.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:25.708Z,1478898685.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:26.074Z,1478898686.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:26.504Z,1478898686.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:26.542Z,1478898686.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:26.902Z,1478898686.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:26.916Z,1478898686.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:27.268Z,1478898687.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:27.673Z,1478898687.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:27.712Z,1478898687.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:28.072Z,1478898688.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:28.508Z,1478898688.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:28.545Z,1478898688.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:28.890Z,1478898688.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:28.916Z,1478898688.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:29.272Z,1478898689.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:29.670Z,1478898689.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:29.712Z,1478898689.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:30.077Z,1478898690.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:30.508Z,1478898690.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:30.540Z,1478898690.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:30.869Z,1478898690.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:30.916Z,1478898690.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:31.273Z,1478898691.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:31.671Z,1478898691.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:31.712Z,1478898691.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:32.070Z,1478898692.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:32.470Z,1478898692.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:32.509Z,1478898692.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:32.881Z,1478898692.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:32.980Z,1478898692.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:33.274Z,1478898693.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:33.692Z,1478898693.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:33.776Z,1478898693.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:34.037Z,1478898694.037 [NAL9602](INFO): NAL9602 initialized
2016-11-11T21:11:34.106Z,1478898694.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:34.465Z,1478898694.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:34.573Z,1478898694.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:34.909Z,1478898694.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:35.312Z,1478898695.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:35.364Z,1478898695.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:35.678Z,1478898695.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:36.102Z,1478898696.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:36.160Z,1478898696.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:36.503Z,1478898696.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:36.956Z,1478898696.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:36.962Z,1478898696.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:37.342Z,1478898697.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:37.376Z,1478898697.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:37.714Z,1478898697.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:38.090Z,1478898698.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:38.177Z,1478898698.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:38.545Z,1478898698.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:38.924Z,1478898698.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:38.925Z,1478898698.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:39.297Z,1478898699.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:39.694Z,1478898699.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:39.720Z,1478898699.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:40.097Z,1478898700.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:40.512Z,1478898700.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:40.520Z,1478898700.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:40.886Z,1478898700.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:40.928Z,1478898700.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:41.301Z,1478898701.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:41.708Z,1478898701.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:41.724Z,1478898701.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:42.121Z,1478898702.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:42.520Z,1478898702.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:42.550Z,1478898702.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:42.916Z,1478898702.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:42.928Z,1478898702.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:43.287Z,1478898703.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:43.700Z,1478898703.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:43.724Z,1478898703.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:44.102Z,1478898704.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:44.520Z,1478898704.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:44.528Z,1478898704.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:44.874Z,1478898704.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:44.928Z,1478898704.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:45.282Z,1478898705.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:45.721Z,1478898705.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:45.724Z,1478898705.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:46.080Z,1478898706.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:46.481Z,1478898706.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:46.521Z,1478898706.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:46.906Z,1478898706.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:46.952Z,1478898706.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:47.325Z,1478898707.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:47.679Z,1478898707.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:47.748Z,1478898707.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:48.079Z,1478898708.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:48.464Z,1478898708.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:48.544Z,1478898708.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:48.938Z,1478898708.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:49.273Z,1478898709.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:49.312Z,1478898709.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:49.701Z,1478898709.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:50.065Z,1478898710.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:50.108Z,1478898710.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:50.502Z,1478898710.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:50.901Z,1478898710.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:50.904Z,1478898710.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:51.265Z,1478898711.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:51.677Z,1478898711.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:51.700Z,1478898711.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:52.089Z,1478898712.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:52.496Z,1478898712.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:52.503Z,1478898712.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:52.881Z,1478898712.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:53.282Z,1478898713.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:53.292Z,1478898713.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:53.670Z,1478898713.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:54.077Z,1478898714.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:54.089Z,1478898714.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:54.469Z,1478898714.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:54.872Z,1478898714.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:54.884Z,1478898714.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:55.272Z,1478898715.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:55.680Z,1478898715.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:55.716Z,1478898715.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:56.090Z,1478898716.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:56.092Z,1478898716.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:56.500Z,1478898716.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:56.525Z,1478898716.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:56.889Z,1478898716.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:56.908Z,1478898716.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:57.295Z,1478898717.295 [PNI_TCM](ERROR): CRC does not match. Expected:0x27943 got:0x31705
2016-11-11T21:11:57.316Z,1478898717.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:57.321Z,1478898717.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:57.721Z,1478898717.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:58.099Z,1478898718.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:58.112Z,1478898718.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:58.482Z,1478898718.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:58.840Z,1478898718.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:58.901Z,1478898718.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:59.313Z,1478898719.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:11:59.636Z,1478898719.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:11:59.682Z,1478898719.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:00.081Z,1478898720.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:00.432Z,1478898720.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:00.556Z,1478898720.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:00.907Z,1478898720.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:00.972Z,1478898720.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:01.329Z,1478898721.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:01.687Z,1478898721.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:01.768Z,1478898721.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:02.093Z,1478898722.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:02.564Z,1478898722.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:03.332Z,1478898723.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:04.128Z,1478898724.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:04.924Z,1478898724.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:05.332Z,1478898725.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:06.128Z,1478898726.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:06.820Z,1478898726.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:07.616Z,1478898727.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:08.413Z,1478898728.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:08.711Z,1478898728.711 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T21:12:08.730Z,1478898728.730 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T21:12:08.731Z,1478898728.731 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T21:12:08.740Z,1478898728.740 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T21:12:08.740Z,1478898728.740 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T21:12:08.740Z,1478898728.740 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T21:12:08.741Z,1478898728.741 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T21:12:08.741Z,1478898728.741 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T21:12:08.742Z,1478898728.742 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T21:12:08.742Z,1478898728.742 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T21:12:08.743Z,1478898728.743 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T21:12:08.751Z,1478898728.751 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T21:12:08.752Z,1478898728.752 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T21:12:08.752Z,1478898728.752 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T21:12:08.752Z,1478898728.753 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T21:12:08.753Z,1478898728.753 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T21:12:08.789Z,1478898728.789 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2016-11-11T21:12:08.789Z,1478898728.789 [PNI_TCM] Data Fault, FailCount= 1
2016-11-11T21:12:08.789Z,1478898728.789 [PNI_TCM](ERROR): Data Fault
2016-11-11T21:12:08.791Z,1478898728.791 [BPC1](ERROR): Failed to receive battery data
2016-11-11T21:12:08.791Z,1478898728.791 [BPC1] Communications Fault, FailCount= 1
2016-11-11T21:12:08.791Z,1478898728.791 [BPC1](ERROR): Communications Fault
2016-11-11T21:12:08.824Z,1478898728.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.731700 seconds old.
2016-11-11T21:12:08.825Z,1478898728.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:08.826Z,1478898728.826 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.732000 seconds old.
2016-11-11T21:12:08.836Z,1478898728.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:08.838Z,1478898728.838 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 6.733700 seconds old.
2016-11-11T21:12:08.850Z,1478898728.850 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.742600 seconds old.
2016-11-11T21:12:08.852Z,1478898728.852 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 6.744000 seconds old.
2016-11-11T21:12:08.900Z,1478898728.900 [CBIT](ERROR): Data Fault in component: PNI_TCM
2016-11-11T21:12:08.900Z,1478898728.900 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T21:12:08.995Z,1478898728.995 [PNI_TCM](INFO): Powering down
2016-11-11T21:12:09.028Z,1478898729.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.935400 seconds old.
2016-11-11T21:12:09.029Z,1478898729.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:09.030Z,1478898729.030 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.935800 seconds old.
2016-11-11T21:12:09.033Z,1478898729.033 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 6.928100 seconds old.
2016-11-11T21:12:09.035Z,1478898729.035 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.928400 seconds old.
2016-11-11T21:12:09.052Z,1478898729.052 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 6.943700 seconds old.
2016-11-11T21:12:09.351Z,1478898729.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.259100 seconds old.
2016-11-11T21:12:09.353Z,1478898729.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:09.354Z,1478898729.354 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.259400 seconds old.
2016-11-11T21:12:09.356Z,1478898729.356 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 7.251600 seconds old.
2016-11-11T21:12:09.359Z,1478898729.359 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.251900 seconds old.
2016-11-11T21:12:09.373Z,1478898729.373 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 7.265200 seconds old.
2016-11-11T21:12:09.632Z,1478898729.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:09.748Z,1478898729.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.655500 seconds old.
2016-11-11T21:12:09.749Z,1478898729.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:09.750Z,1478898729.750 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.655900 seconds old.
2016-11-11T21:12:09.753Z,1478898729.753 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 7.648200 seconds old.
2016-11-11T21:12:09.759Z,1478898729.759 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.652700 seconds old.
2016-11-11T21:12:09.761Z,1478898729.761 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 7.653000 seconds old.
2016-11-11T21:12:09.791Z,1478898729.791 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:12:09.791Z,1478898729.792 [BPC1] No Fault, FailCount= 1
2016-11-11T21:12:10.199Z,1478898730.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.107100 seconds old.
2016-11-11T21:12:10.201Z,1478898730.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:10.202Z,1478898730.202 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.107500 seconds old.
2016-11-11T21:12:10.220Z,1478898730.220 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 8.115000 seconds old.
2016-11-11T21:12:10.222Z,1478898730.222 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.115500 seconds old.
2016-11-11T21:12:10.224Z,1478898730.224 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 8.115900 seconds old.
2016-11-11T21:12:10.265Z,1478898730.265 [CBIT](INFO): Clearing failed state for component PNI_TCM
2016-11-11T21:12:10.266Z,1478898730.266 [PNI_TCM] No Fault, FailCount= 1
2016-11-11T21:12:10.429Z,1478898730.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:10.580Z,1478898730.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.487500 seconds old.
2016-11-11T21:12:10.581Z,1478898730.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:10.582Z,1478898730.582 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.487900 seconds old.
2016-11-11T21:12:10.597Z,1478898730.597 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 8.492600 seconds old.
2016-11-11T21:12:10.612Z,1478898730.612 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.505500 seconds old.
2016-11-11T21:12:10.614Z,1478898730.614 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 8.505800 seconds old.
2016-11-11T21:12:10.840Z,1478898730.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:10.937Z,1478898730.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.844600 seconds old.
2016-11-11T21:12:10.938Z,1478898730.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:10.939Z,1478898730.940 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.845100 seconds old.
2016-11-11T21:12:10.942Z,1478898730.942 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 8.837400 seconds old.
2016-11-11T21:12:10.965Z,1478898730.965 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.858000 seconds old.
2016-11-11T21:12:10.966Z,1478898730.966 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 8.858300 seconds old.
2016-11-11T21:12:11.356Z,1478898731.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.263200 seconds old.
2016-11-11T21:12:11.357Z,1478898731.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:11.358Z,1478898731.358 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.263600 seconds old.
2016-11-11T21:12:11.393Z,1478898731.393 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 9.287900 seconds old.
2016-11-11T21:12:11.395Z,1478898731.395 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.288400 seconds old.
2016-11-11T21:12:11.397Z,1478898731.397 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 9.288800 seconds old.
2016-11-11T21:12:11.637Z,1478898731.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:11.764Z,1478898731.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.671600 seconds old.
2016-11-11T21:12:11.765Z,1478898731.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:11.766Z,1478898731.766 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.672000 seconds old.
2016-11-11T21:12:11.777Z,1478898731.777 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 9.672400 seconds old.
2016-11-11T21:12:11.788Z,1478898731.788 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.681200 seconds old.
2016-11-11T21:12:11.789Z,1478898731.789 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 9.681500 seconds old.
2016-11-11T21:12:12.153Z,1478898732.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.061000 seconds old.
2016-11-11T21:12:12.155Z,1478898732.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:12.160Z,1478898732.160 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.065800 seconds old.
2016-11-11T21:12:12.163Z,1478898732.163 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 10.058100 seconds old.
2016-11-11T21:12:12.170Z,1478898732.170 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.062900 seconds old.
2016-11-11T21:12:12.176Z,1478898732.176 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 10.067600 seconds old.
2016-11-11T21:12:12.432Z,1478898732.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:12.567Z,1478898732.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.470500 seconds old.
2016-11-11T21:12:12.569Z,1478898732.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:12.570Z,1478898732.570 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.475300 seconds old.
2016-11-11T21:12:12.577Z,1478898732.577 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 10.471900 seconds old.
2016-11-11T21:12:12.584Z,1478898732.584 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.476700 seconds old.
2016-11-11T21:12:12.585Z,1478898732.585 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 10.477100 seconds old.
2016-11-11T21:12:12.840Z,1478898732.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:12.944Z,1478898732.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.851300 seconds old.
2016-11-11T21:12:12.945Z,1478898732.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:12.946Z,1478898732.946 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.851700 seconds old.
2016-11-11T21:12:12.984Z,1478898732.984 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 10.878900 seconds old.
2016-11-11T21:12:12.986Z,1478898732.986 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.879500 seconds old.
2016-11-11T21:12:12.996Z,1478898732.996 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 10.887700 seconds old.
2016-11-11T21:12:13.345Z,1478898733.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.252400 seconds old.
2016-11-11T21:12:13.346Z,1478898733.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:13.356Z,1478898733.355 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.261000 seconds old.
2016-11-11T21:12:13.358Z,1478898733.358 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 11.253400 seconds old.
2016-11-11T21:12:13.369Z,1478898733.369 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.262300 seconds old.
2016-11-11T21:12:13.371Z,1478898733.371 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 11.262600 seconds old.
2016-11-11T21:12:13.637Z,1478898733.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:13.773Z,1478898733.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:14.183Z,1478898734.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:14.432Z,1478898734.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:14.620Z,1478898734.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:14.936Z,1478898734.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:14.983Z,1478898734.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:15.371Z,1478898735.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:15.732Z,1478898735.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:15.769Z,1478898735.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:16.161Z,1478898736.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:16.528Z,1478898736.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:16.575Z,1478898736.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:16.986Z,1478898736.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:17.272Z,1478898737.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:17.371Z,1478898737.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:17.779Z,1478898737.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:18.069Z,1478898738.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:18.162Z,1478898738.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:18.565Z,1478898738.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:18.865Z,1478898738.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:18.983Z,1478898738.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:19.276Z,1478898739.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:19.378Z,1478898739.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:19.797Z,1478898739.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:20.072Z,1478898740.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:20.188Z,1478898740.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:20.570Z,1478898740.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:20.784Z,1478898740.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:20.970Z,1478898740.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:21.406Z,1478898741.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:21.580Z,1478898741.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:21.770Z,1478898741.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:22.165Z,1478898742.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:22.377Z,1478898742.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:22.610Z,1478898742.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:22.788Z,1478898742.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:22.959Z,1478898742.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:23.363Z,1478898743.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:23.584Z,1478898743.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:23.799Z,1478898743.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:24.186Z,1478898744.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:24.381Z,1478898744.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:24.585Z,1478898744.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:24.792Z,1478898744.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:25.004Z,1478898745.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:25.374Z,1478898745.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:25.591Z,1478898745.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:25.775Z,1478898745.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:26.171Z,1478898746.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:26.389Z,1478898746.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:26.568Z,1478898746.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:26.804Z,1478898746.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:26.969Z,1478898746.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:27.345Z,1478898747.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:27.601Z,1478898747.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:27.749Z,1478898747.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:28.150Z,1478898748.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:28.396Z,1478898748.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:28.578Z,1478898748.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:28.896Z,1478898748.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:28.981Z,1478898748.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:29.359Z,1478898749.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:29.692Z,1478898749.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:29.759Z,1478898749.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:30.163Z,1478898750.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:30.488Z,1478898750.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:30.559Z,1478898750.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:30.945Z,1478898750.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:31.232Z,1478898751.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:31.349Z,1478898751.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:31.749Z,1478898751.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:32.028Z,1478898752.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:32.149Z,1478898752.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:32.549Z,1478898752.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:32.825Z,1478898752.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:32.957Z,1478898752.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:33.236Z,1478898753.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:33.367Z,1478898753.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:33.750Z,1478898753.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:34.032Z,1478898754.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:34.149Z,1478898754.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:34.559Z,1478898754.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:34.828Z,1478898754.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:34.960Z,1478898754.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:35.368Z,1478898755.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:35.624Z,1478898755.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:35.786Z,1478898755.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:36.149Z,1478898756.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:36.420Z,1478898756.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:36.549Z,1478898756.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:36.949Z,1478898756.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:37.216Z,1478898757.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:37.373Z,1478898757.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:37.749Z,1478898757.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:38.012Z,1478898758.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:38.181Z,1478898758.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:38.611Z,1478898758.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:38.808Z,1478898758.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:38.982Z,1478898758.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:39.383Z,1478898759.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:39.604Z,1478898759.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:39.771Z,1478898759.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:40.163Z,1478898760.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:40.400Z,1478898760.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:40.563Z,1478898760.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:40.960Z,1478898760.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:41.196Z,1478898761.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:41.350Z,1478898761.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:41.752Z,1478898761.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:41.992Z,1478898761.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:42.165Z,1478898762.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:42.549Z,1478898762.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:42.788Z,1478898762.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:42.967Z,1478898762.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:43.353Z,1478898763.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:43.584Z,1478898763.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:43.757Z,1478898763.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:44.141Z,1478898764.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:44.380Z,1478898764.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:44.549Z,1478898764.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:44.990Z,1478898764.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:45.104Z,1478898765.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:45.377Z,1478898765.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:45.512Z,1478898765.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:45.775Z,1478898765.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:45.920Z,1478898765.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:46.166Z,1478898766.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:46.328Z,1478898766.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:46.572Z,1478898766.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:46.736Z,1478898766.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:46.961Z,1478898766.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:47.144Z,1478898767.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:47.359Z,1478898767.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:47.552Z,1478898767.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:47.760Z,1478898767.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:48.149Z,1478898768.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:48.349Z,1478898768.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:48.576Z,1478898768.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:48.760Z,1478898768.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:48.971Z,1478898768.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:49.369Z,1478898769.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:49.556Z,1478898769.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:49.764Z,1478898769.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:50.201Z,1478898770.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:50.353Z,1478898770.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:50.567Z,1478898770.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:50.764Z,1478898770.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:50.965Z,1478898770.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:51.377Z,1478898771.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:51.560Z,1478898771.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:51.801Z,1478898771.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:52.164Z,1478898772.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:52.356Z,1478898772.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:52.568Z,1478898772.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:52.764Z,1478898772.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:52.981Z,1478898772.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:53.374Z,1478898773.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:53.560Z,1478898773.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:53.785Z,1478898773.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:54.185Z,1478898774.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:54.356Z,1478898774.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:54.573Z,1478898774.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:54.764Z,1478898774.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:54.973Z,1478898774.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:55.366Z,1478898775.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:55.560Z,1478898775.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:55.775Z,1478898775.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:56.169Z,1478898776.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:56.356Z,1478898776.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:56.580Z,1478898776.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:56.828Z,1478898776.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:56.960Z,1478898776.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:57.361Z,1478898777.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:57.624Z,1478898777.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:57.762Z,1478898777.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:58.169Z,1478898778.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:58.421Z,1478898778.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:58.561Z,1478898778.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:58.955Z,1478898778.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:59.188Z,1478898779.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:12:59.370Z,1478898779.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:59.765Z,1478898779.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:12:59.985Z,1478898779.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:00.162Z,1478898780.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:00.567Z,1478898780.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:00.781Z,1478898780.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:00.973Z,1478898780.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:01.192Z,1478898781.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:01.371Z,1478898781.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:01.767Z,1478898781.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:01.988Z,1478898781.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:02.166Z,1478898782.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:02.716Z,1478898782.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:03.512Z,1478898783.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:04.309Z,1478898784.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:04.720Z,1478898784.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:05.516Z,1478898785.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:05.687Z,1478898785.687 [PNI_TCM](ERROR): CRC does not match. Expected:0x36037 got:0x1857
2016-11-11T21:13:05.687Z,1478898785.687 [PNI_TCM](ERROR): CRC does not match. Expected:0x60091 got:0x1857
2016-11-11T21:13:05.688Z,1478898785.688 [PNI_TCM](ERROR): CRC does not match. Expected:0x10561 got:0x1857
2016-11-11T21:13:05.688Z,1478898785.688 [PNI_TCM](ERROR): CRC does not match. Expected:0x49678 got:0x1857
2016-11-11T21:13:05.688Z,1478898785.688 [PNI_TCM](ERROR): CRC does not match. Expected:0x13823 got:0x1857
2016-11-11T21:13:05.689Z,1478898785.689 [PNI_TCM](ERROR): CRC does not match. Expected:0x39952 got:0x1857
2016-11-11T21:13:05.689Z,1478898785.689 [PNI_TCM](ERROR): CRC does not match. Expected:0x33255 got:0x1857
2016-11-11T21:13:05.690Z,1478898785.690 [PNI_TCM](ERROR): CRC does not match. Expected:0x26821 got:0x1857
2016-11-11T21:13:05.746Z,1478898785.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:05.878Z,1478898785.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:06.313Z,1478898786.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:06.336Z,1478898786.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:06.671Z,1478898786.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:06.724Z,1478898786.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:07.047Z,1478898787.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:07.498Z,1478898787.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:07.520Z,1478898787.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:07.844Z,1478898787.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:08.308Z,1478898788.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:08.325Z,1478898788.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:08.691Z,1478898788.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:08.736Z,1478898788.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:09.053Z,1478898789.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:09.446Z,1478898789.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:09.532Z,1478898789.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:09.852Z,1478898789.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:10.253Z,1478898790.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:10.330Z,1478898790.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:10.649Z,1478898790.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:10.820Z,1478898790.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:11.045Z,1478898791.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:11.453Z,1478898791.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:11.616Z,1478898791.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:11.846Z,1478898791.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:12.249Z,1478898792.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:12.412Z,1478898792.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:12.653Z,1478898792.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:13.049Z,1478898793.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:13.176Z,1478898793.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:13.445Z,1478898793.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:13.853Z,1478898793.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:13.972Z,1478898793.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:14.250Z,1478898794.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:14.645Z,1478898794.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:14.770Z,1478898794.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:15.053Z,1478898795.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:15.184Z,1478898795.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:15.453Z,1478898795.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:15.864Z,1478898795.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:15.981Z,1478898795.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:16.297Z,1478898796.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:16.648Z,1478898796.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:16.728Z,1478898796.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:17.049Z,1478898797.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:17.448Z,1478898797.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:17.524Z,1478898797.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:17.860Z,1478898797.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:18.292Z,1478898798.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:18.320Z,1478898798.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:18.649Z,1478898798.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:18.728Z,1478898798.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:19.086Z,1478898799.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:19.488Z,1478898799.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:19.524Z,1478898799.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:19.883Z,1478898799.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:19.883Z,1478898799.883 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 307
2016-11-11T21:13:19.883Z,1478898799.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T21:13:19.890Z,1478898799.890 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:19.890Z,1478898799.890 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 307
2016-11-11T21:13:19.890Z,1478898799.890 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T21:13:19.892Z,1478898799.892 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:19.892Z,1478898799.892 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 307
2016-11-11T21:13:19.892Z,1478898799.892 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:13:19.907Z,1478898799.907 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T21:13:19.907Z,1478898799.907 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T21:13:19.907Z,1478898799.907 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:13:20.320Z,1478898800.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:20.414Z,1478898800.414 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T21:13:20.414Z,1478898800.414 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 307
2016-11-11T21:13:20.414Z,1478898800.414 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T21:13:20.415Z,1478898800.415 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 307
2016-11-11T21:13:20.424Z,1478898800.424 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:13:20.424Z,1478898800.424 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 307
2016-11-11T21:13:20.688Z,1478898800.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T21:13:20.688Z,1478898800.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:13:20.689Z,1478898800.689 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:13:20.693Z,1478898800.693 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T21:13:20.694Z,1478898800.694 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:13:20.694Z,1478898800.694 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:13:20.695Z,1478898800.694 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:13:20.723Z,1478898800.723 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:13:20.724Z,1478898800.724 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:13:20.728Z,1478898800.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:21.049Z,1478898801.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:21.490Z,1478898801.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:21.524Z,1478898801.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:21.890Z,1478898801.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:22.305Z,1478898802.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:22.320Z,1478898802.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:22.660Z,1478898802.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:22.728Z,1478898802.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:23.052Z,1478898803.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:23.452Z,1478898803.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:23.524Z,1478898803.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:23.853Z,1478898803.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:24.257Z,1478898804.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:24.320Z,1478898804.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:24.652Z,1478898804.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:24.784Z,1478898804.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:25.052Z,1478898805.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:25.452Z,1478898805.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:25.580Z,1478898805.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:25.852Z,1478898805.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:26.250Z,1478898806.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:26.376Z,1478898806.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:26.654Z,1478898806.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:27.048Z,1478898807.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:27.144Z,1478898807.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:27.452Z,1478898807.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:27.844Z,1478898807.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:27.940Z,1478898807.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:28.257Z,1478898808.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:28.654Z,1478898808.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:28.736Z,1478898808.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:29.052Z,1478898809.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:29.156Z,1478898809.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:29.454Z,1478898809.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:29.859Z,1478898809.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:29.952Z,1478898809.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:30.289Z,1478898810.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:30.649Z,1478898810.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:30.708Z,1478898810.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:31.053Z,1478898811.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:31.445Z,1478898811.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:31.504Z,1478898811.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:31.848Z,1478898811.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:32.300Z,1478898812.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:32.338Z,1478898812.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:32.673Z,1478898812.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:32.708Z,1478898812.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:33.093Z,1478898813.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:33.453Z,1478898813.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:33.504Z,1478898813.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:33.882Z,1478898813.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:34.300Z,1478898814.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:34.325Z,1478898814.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:34.646Z,1478898814.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:34.708Z,1478898814.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:35.054Z,1478898815.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:35.454Z,1478898815.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:35.504Z,1478898815.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:35.850Z,1478898815.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:36.300Z,1478898816.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:36.321Z,1478898816.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:36.641Z,1478898816.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:36.708Z,1478898816.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:37.098Z,1478898817.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:37.444Z,1478898817.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:37.504Z,1478898817.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:37.849Z,1478898817.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:38.275Z,1478898818.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:38.300Z,1478898818.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:38.682Z,1478898818.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:38.764Z,1478898818.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:39.069Z,1478898819.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:39.437Z,1478898819.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:39.560Z,1478898819.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:39.861Z,1478898819.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:40.241Z,1478898820.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:40.356Z,1478898820.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:40.643Z,1478898820.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:41.068Z,1478898821.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:41.136Z,1478898821.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:41.454Z,1478898821.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:41.846Z,1478898821.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:41.932Z,1478898821.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:42.254Z,1478898822.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:42.653Z,1478898822.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:42.729Z,1478898822.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:43.060Z,1478898823.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:43.140Z,1478898823.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:43.441Z,1478898823.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:43.849Z,1478898823.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:43.936Z,1478898823.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:44.304Z,1478898824.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:44.684Z,1478898824.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:44.695Z,1478898824.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:45.059Z,1478898825.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:45.467Z,1478898825.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:45.480Z,1478898825.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:45.858Z,1478898825.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:46.276Z,1478898826.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:46.310Z,1478898826.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:46.677Z,1478898826.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:46.688Z,1478898826.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:47.045Z,1478898827.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:47.440Z,1478898827.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:47.484Z,1478898827.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:47.845Z,1478898827.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:48.280Z,1478898828.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:48.305Z,1478898828.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:48.641Z,1478898828.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:48.688Z,1478898828.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:49.040Z,1478898829.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:49.443Z,1478898829.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:49.484Z,1478898829.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:49.848Z,1478898829.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:50.280Z,1478898830.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:50.327Z,1478898830.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:50.649Z,1478898830.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:50.688Z,1478898830.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:51.060Z,1478898831.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:51.446Z,1478898831.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:51.484Z,1478898831.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:51.854Z,1478898831.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:52.253Z,1478898832.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:52.280Z,1478898832.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:52.651Z,1478898832.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:52.752Z,1478898832.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:53.049Z,1478898833.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:53.453Z,1478898833.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:53.548Z,1478898833.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:53.852Z,1478898833.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:54.265Z,1478898834.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:54.344Z,1478898834.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:54.715Z,1478898834.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:55.046Z,1478898835.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:55.100Z,1478898835.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:55.414Z,1478898835.414 [NAL9602](INFO): SBD MO Status=2, MOMSN=359, MT Status=2, MTMSN=0
2016-11-11T21:13:55.414Z,1478898835.414 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T21:13:55.505Z,1478898835.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:55.869Z,1478898835.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:55.896Z,1478898835.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:56.245Z,1478898836.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:56.653Z,1478898836.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:56.693Z,1478898836.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:57.069Z,1478898837.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:57.108Z,1478898837.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:57.449Z,1478898837.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:57.849Z,1478898837.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:57.904Z,1478898837.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:58.288Z,1478898838.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:58.649Z,1478898838.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:58.676Z,1478898838.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:59.049Z,1478898839.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:59.460Z,1478898839.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:13:59.472Z,1478898839.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:13:59.863Z,1478898839.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:00.266Z,1478898840.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:00.268Z,1478898840.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:00.649Z,1478898840.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:00.684Z,1478898840.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:01.043Z,1478898841.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:01.452Z,1478898841.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:01.480Z,1478898841.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:01.839Z,1478898841.839 [BPC1](ERROR): Failed to receive battery data
2016-11-11T21:14:01.840Z,1478898841.839 [BPC1] Communications Fault, FailCount= 1
2016-11-11T21:14:01.840Z,1478898841.840 [BPC1](ERROR): Communications Fault
2016-11-11T21:14:01.848Z,1478898841.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:01.870Z,1478898841.870 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T21:14:02.276Z,1478898842.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:02.289Z,1478898842.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:02.684Z,1478898842.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:03.480Z,1478898843.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:04.276Z,1478898844.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:04.684Z,1478898844.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:05.480Z,1478898845.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:05.606Z,1478898845.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:05.740Z,1478898845.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:05.784Z,1478898845.784 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:14:05.784Z,1478898845.784 [BPC1] No Fault, FailCount= 1
2016-11-11T21:14:06.145Z,1478898846.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:06.276Z,1478898846.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:06.518Z,1478898846.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:06.736Z,1478898846.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:06.883Z,1478898846.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:07.293Z,1478898847.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:07.532Z,1478898847.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:07.699Z,1478898847.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:08.090Z,1478898848.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:08.328Z,1478898848.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:08.487Z,1478898848.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:08.892Z,1478898848.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:09.084Z,1478898849.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:09.281Z,1478898849.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:09.689Z,1478898849.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:09.880Z,1478898849.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:10.089Z,1478898850.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:10.485Z,1478898850.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:10.676Z,1478898850.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:10.893Z,1478898850.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:11.092Z,1478898851.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:11.309Z,1478898851.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:11.695Z,1478898851.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:11.888Z,1478898851.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:12.088Z,1478898852.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:12.493Z,1478898852.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:12.608Z,1478898852.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:12.892Z,1478898852.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:13.277Z,1478898853.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:13.404Z,1478898853.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:13.677Z,1478898853.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:14.076Z,1478898854.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:14.201Z,1478898854.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:14.489Z,1478898854.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:14.616Z,1478898854.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:14.881Z,1478898854.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:15.285Z,1478898855.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:15.412Z,1478898855.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:15.689Z,1478898855.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:16.081Z,1478898856.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:16.221Z,1478898856.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:16.483Z,1478898856.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:16.632Z,1478898856.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:16.883Z,1478898856.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:17.285Z,1478898857.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:17.428Z,1478898857.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:17.681Z,1478898857.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:18.083Z,1478898858.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:18.225Z,1478898858.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:18.529Z,1478898858.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:18.632Z,1478898858.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:18.888Z,1478898858.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:19.292Z,1478898859.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:19.428Z,1478898859.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:19.710Z,1478898859.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:20.094Z,1478898860.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:20.224Z,1478898860.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:20.533Z,1478898860.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:20.704Z,1478898860.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:20.910Z,1478898860.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:21.292Z,1478898861.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:21.500Z,1478898861.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:21.693Z,1478898861.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:22.093Z,1478898862.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:22.296Z,1478898862.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:22.492Z,1478898862.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:22.897Z,1478898862.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:23.056Z,1478898863.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:23.293Z,1478898863.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:23.697Z,1478898863.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:23.852Z,1478898863.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:24.077Z,1478898864.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:24.510Z,1478898864.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:24.649Z,1478898864.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:24.902Z,1478898864.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:25.064Z,1478898865.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:25.281Z,1478898865.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:25.681Z,1478898865.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:25.860Z,1478898865.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:26.085Z,1478898866.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:26.489Z,1478898866.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:26.588Z,1478898866.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:26.890Z,1478898866.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:27.282Z,1478898867.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:27.384Z,1478898867.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:27.693Z,1478898867.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:28.093Z,1478898868.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:28.181Z,1478898868.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:28.502Z,1478898868.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:28.592Z,1478898868.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:28.897Z,1478898868.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:29.285Z,1478898869.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:29.388Z,1478898869.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:29.696Z,1478898869.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:30.095Z,1478898870.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:30.184Z,1478898870.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:30.504Z,1478898870.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:30.596Z,1478898870.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:30.885Z,1478898870.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:31.282Z,1478898871.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:31.392Z,1478898871.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:31.721Z,1478898871.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:32.082Z,1478898872.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:32.189Z,1478898872.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:32.490Z,1478898872.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:32.600Z,1478898872.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:32.941Z,1478898872.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:33.294Z,1478898873.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:33.396Z,1478898873.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:33.697Z,1478898873.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:34.113Z,1478898874.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:34.192Z,1478898874.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:34.485Z,1478898874.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:34.680Z,1478898874.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:34.913Z,1478898874.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:35.324Z,1478898875.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:35.476Z,1478898875.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:35.693Z,1478898875.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:36.085Z,1478898876.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:36.272Z,1478898876.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:36.485Z,1478898876.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:36.881Z,1478898876.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:37.036Z,1478898877.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:37.285Z,1478898877.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:37.685Z,1478898877.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:37.832Z,1478898877.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:38.093Z,1478898878.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:38.484Z,1478898878.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:38.629Z,1478898878.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:38.885Z,1478898878.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:39.040Z,1478898879.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:39.282Z,1478898879.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:39.691Z,1478898879.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:39.836Z,1478898879.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:40.094Z,1478898880.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:40.493Z,1478898880.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:40.568Z,1478898880.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:40.897Z,1478898880.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:41.297Z,1478898881.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:41.364Z,1478898881.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:41.706Z,1478898881.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:42.095Z,1478898882.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:42.161Z,1478898882.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:42.505Z,1478898882.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:42.584Z,1478898882.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:42.878Z,1478898882.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:43.283Z,1478898883.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:43.380Z,1478898883.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:43.685Z,1478898883.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:44.088Z,1478898884.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:44.177Z,1478898884.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:44.489Z,1478898884.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:44.588Z,1478898884.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:44.889Z,1478898884.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:45.289Z,1478898885.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:45.384Z,1478898885.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:45.694Z,1478898885.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:46.181Z,1478898886.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:46.189Z,1478898886.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:46.508Z,1478898886.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:46.592Z,1478898886.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:46.881Z,1478898886.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:47.298Z,1478898887.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:47.388Z,1478898887.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:47.690Z,1478898887.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:48.079Z,1478898888.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:48.184Z,1478898888.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:48.521Z,1478898888.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:48.672Z,1478898888.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:48.881Z,1478898888.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:49.325Z,1478898889.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:49.468Z,1478898889.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:49.706Z,1478898889.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:50.081Z,1478898890.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:50.264Z,1478898890.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:50.481Z,1478898890.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:50.891Z,1478898890.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:51.020Z,1478898891.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:51.281Z,1478898891.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:51.689Z,1478898891.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:51.816Z,1478898891.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:52.083Z,1478898892.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:52.481Z,1478898892.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:52.620Z,1478898892.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:52.893Z,1478898892.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:53.040Z,1478898893.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:53.289Z,1478898893.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:53.682Z,1478898893.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:53.836Z,1478898893.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:54.085Z,1478898894.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:54.493Z,1478898894.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:54.560Z,1478898894.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:54.911Z,1478898894.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:55.279Z,1478898895.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:55.356Z,1478898895.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:55.680Z,1478898895.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:56.084Z,1478898896.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:56.153Z,1478898896.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:56.497Z,1478898896.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:56.564Z,1478898896.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:56.877Z,1478898896.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:57.281Z,1478898897.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:57.360Z,1478898897.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:57.681Z,1478898897.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:58.089Z,1478898898.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:58.156Z,1478898898.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:58.505Z,1478898898.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:58.568Z,1478898898.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:58.881Z,1478898898.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:59.279Z,1478898899.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:14:59.364Z,1478898899.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:14:59.688Z,1478898899.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:00.093Z,1478898900.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:00.161Z,1478898900.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:00.472Z,1478898900.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:00.568Z,1478898900.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:00.909Z,1478898900.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:01.285Z,1478898901.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:01.364Z,1478898901.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:01.710Z,1478898901.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:02.089Z,1478898902.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:02.160Z,1478898902.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:02.523Z,1478898902.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:02.636Z,1478898902.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:03.432Z,1478898903.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:04.228Z,1478898904.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:05.004Z,1478898905.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:05.800Z,1478898905.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:05.838Z,1478898905.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:06.001Z,1478898906.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:06.350Z,1478898906.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:06.597Z,1478898906.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:06.763Z,1478898906.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:07.008Z,1478898907.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:07.144Z,1478898907.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:07.543Z,1478898907.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:07.804Z,1478898907.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:07.961Z,1478898907.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:08.341Z,1478898908.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:08.526Z,1478898908.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:08.745Z,1478898908.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:09.145Z,1478898909.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:09.320Z,1478898909.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:09.548Z,1478898909.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:09.950Z,1478898909.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:10.122Z,1478898910.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:10.343Z,1478898910.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:10.552Z,1478898910.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:10.745Z,1478898910.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:11.161Z,1478898911.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:11.348Z,1478898911.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:11.545Z,1478898911.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:11.965Z,1478898911.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:12.144Z,1478898912.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:12.357Z,1478898912.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:12.552Z,1478898912.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:12.762Z,1478898912.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:13.132Z,1478898913.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:13.348Z,1478898913.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:13.533Z,1478898913.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:13.957Z,1478898913.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:14.144Z,1478898914.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:14.344Z,1478898914.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:14.552Z,1478898914.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:14.750Z,1478898914.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:15.157Z,1478898915.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:15.348Z,1478898915.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:15.553Z,1478898915.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:15.952Z,1478898915.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:16.144Z,1478898916.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:16.361Z,1478898916.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:16.640Z,1478898916.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:16.739Z,1478898916.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:17.189Z,1478898917.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:17.436Z,1478898917.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:17.552Z,1478898917.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:17.948Z,1478898917.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:18.234Z,1478898918.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:18.365Z,1478898918.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:18.760Z,1478898918.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:18.992Z,1478898918.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:19.185Z,1478898919.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:19.545Z,1478898919.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:19.788Z,1478898919.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:19.973Z,1478898919.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:20.389Z,1478898920.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:20.585Z,1478898920.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:20.744Z,1478898920.744 [PNI_TCM](ERROR): CRC does not match. Expected:0x39321 got:0x28700
2016-11-11T21:15:20.777Z,1478898920.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:20.996Z,1478898920.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:21.150Z,1478898921.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:21.553Z,1478898921.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:21.792Z,1478898921.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:21.953Z,1478898921.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:22.340Z,1478898922.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:22.500Z,1478898922.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:22.742Z,1478898922.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:23.142Z,1478898923.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:23.296Z,1478898923.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:23.543Z,1478898923.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:23.953Z,1478898923.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:24.093Z,1478898924.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:24.346Z,1478898924.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:24.504Z,1478898924.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:24.749Z,1478898924.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:25.161Z,1478898925.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:25.300Z,1478898925.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:25.539Z,1478898925.539 [PNI_TCM](ERROR): CRC does not match. Expected:0x49780 got:0x60288
2016-11-11T21:15:25.558Z,1478898925.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:25.953Z,1478898925.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:26.101Z,1478898926.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:26.350Z,1478898926.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:26.536Z,1478898926.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:26.761Z,1478898926.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:27.123Z,1478898927.123 [PNI_TCM](ERROR): CRC does not match. Expected:0x56532 got:0x16913
2016-11-11T21:15:27.154Z,1478898927.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:27.332Z,1478898927.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:27.552Z,1478898927.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:27.948Z,1478898927.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:28.129Z,1478898928.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:28.350Z,1478898928.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:28.540Z,1478898928.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:28.747Z,1478898928.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:29.131Z,1478898929.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:29.338Z,1478898929.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:29.561Z,1478898929.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:29.958Z,1478898929.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:30.132Z,1478898930.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:30.369Z,1478898930.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:30.616Z,1478898930.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:30.785Z,1478898930.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:31.145Z,1478898931.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:31.413Z,1478898931.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:31.541Z,1478898931.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:31.941Z,1478898931.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:32.209Z,1478898932.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:32.381Z,1478898932.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:32.754Z,1478898932.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:32.952Z,1478898932.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:33.153Z,1478898933.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:33.590Z,1478898933.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:33.748Z,1478898933.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:33.950Z,1478898933.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:34.358Z,1478898934.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:34.545Z,1478898934.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:34.787Z,1478898934.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:34.956Z,1478898934.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:35.152Z,1478898935.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:35.553Z,1478898935.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:35.752Z,1478898935.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:35.954Z,1478898935.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:36.355Z,1478898936.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:36.480Z,1478898936.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:36.761Z,1478898936.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:37.137Z,1478898937.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:37.276Z,1478898937.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:37.541Z,1478898937.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:37.948Z,1478898937.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:38.073Z,1478898938.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:38.337Z,1478898938.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:38.484Z,1478898938.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:38.740Z,1478898938.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:39.141Z,1478898939.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:39.280Z,1478898939.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:39.542Z,1478898939.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:39.941Z,1478898939.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:40.077Z,1478898940.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:40.381Z,1478898940.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:40.488Z,1478898940.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:40.746Z,1478898940.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:41.149Z,1478898941.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:41.284Z,1478898941.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:41.553Z,1478898941.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:41.957Z,1478898941.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:42.081Z,1478898942.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:42.346Z,1478898942.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:42.496Z,1478898942.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:42.754Z,1478898942.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:43.153Z,1478898943.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:43.292Z,1478898943.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:43.553Z,1478898943.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:43.962Z,1478898943.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:44.088Z,1478898944.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:44.337Z,1478898944.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:44.572Z,1478898944.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:44.741Z,1478898944.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:45.136Z,1478898945.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:45.368Z,1478898945.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:45.540Z,1478898945.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:45.952Z,1478898945.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:46.164Z,1478898946.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:46.346Z,1478898946.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:46.761Z,1478898946.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:46.932Z,1478898946.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:47.141Z,1478898947.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:47.583Z,1478898947.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:47.728Z,1478898947.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:47.938Z,1478898947.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:48.381Z,1478898948.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:48.525Z,1478898948.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:48.761Z,1478898948.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:48.940Z,1478898948.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:49.149Z,1478898949.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:49.545Z,1478898949.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:49.736Z,1478898949.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:49.949Z,1478898949.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:50.347Z,1478898950.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:50.460Z,1478898950.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:50.745Z,1478898950.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:51.156Z,1478898951.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:51.256Z,1478898951.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:51.549Z,1478898951.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:51.953Z,1478898951.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:52.053Z,1478898952.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:52.336Z,1478898952.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:52.464Z,1478898952.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:52.744Z,1478898952.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:53.140Z,1478898953.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:53.262Z,1478898953.262 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:53.541Z,1478898953.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:53.946Z,1478898953.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:54.057Z,1478898954.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:54.350Z,1478898954.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:54.472Z,1478898954.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:54.751Z,1478898954.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:55.138Z,1478898955.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:55.268Z,1478898955.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:55.545Z,1478898955.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:55.945Z,1478898955.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:56.069Z,1478898956.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:56.333Z,1478898956.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:56.488Z,1478898956.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:56.741Z,1478898956.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:57.141Z,1478898957.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:57.285Z,1478898957.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:57.544Z,1478898957.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:57.943Z,1478898957.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:58.080Z,1478898958.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:58.341Z,1478898958.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:58.580Z,1478898958.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:58.750Z,1478898958.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:59.149Z,1478898959.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:59.376Z,1478898959.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:15:59.545Z,1478898959.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:15:59.938Z,1478898959.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:00.174Z,1478898960.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:00.349Z,1478898960.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:00.809Z,1478898960.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:00.920Z,1478898960.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:01.140Z,1478898961.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:01.545Z,1478898961.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:01.554Z,1478898961.554 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T21:11:01.5Z
2016-11-11T21:16:01.554Z,1478898961.554 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T21:16:01.554Z,1478898961.554 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T21:16:01.716Z,1478898961.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:01.970Z,1478898961.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:02.513Z,1478898962.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:02.871Z,1478898962.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:02.924Z,1478898962.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:03.047Z,1478898963.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:03.720Z,1478898963.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:04.448Z,1478898964.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:05.244Z,1478898965.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:06.043Z,1478898966.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:06.456Z,1478898966.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:06.707Z,1478898966.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:06.736Z,1478898966.736 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0380.lzma
2016-11-11T21:16:06.823Z,1478898966.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:07.188Z,1478898967.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:07.252Z,1478898967.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:07.538Z,1478898967.538 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0380.lzma.bak
2016-11-11T21:16:07.538Z,1478898967.538 [DataOverHttps](INFO): SBD MOMSN=4555767
2016-11-11T21:16:07.625Z,1478898967.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:08.050Z,1478898968.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:08.460Z,1478898968.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:08.968Z,1478898968.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:09.076Z,1478898969.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:09.256Z,1478898969.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:10.052Z,1478898970.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:10.460Z,1478898970.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:11.256Z,1478898971.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:12.052Z,1478898972.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:12.485Z,1478898972.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:12.528Z,1478898972.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:12.628Z,1478898972.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:12.988Z,1478898972.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:13.324Z,1478898973.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:13.391Z,1478898973.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:13.757Z,1478898973.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:14.122Z,1478898974.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:14.164Z,1478898974.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:14.876Z,1478898974.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:15.672Z,1478898975.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:16.469Z,1478898976.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:16.880Z,1478898976.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:17.676Z,1478898977.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:17.757Z,1478898977.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:17.777Z,1478898977.777 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T21:16:17.819Z,1478898977.819 [DataOverHttps](INFO): Sending 237 bytes from file Logs/20161111T044527/Express0381.lzma
2016-11-11T21:16:17.900Z,1478898977.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:18.294Z,1478898978.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:18.404Z,1478898978.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:18.590Z,1478898978.590 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0381.lzma.bak
2016-11-11T21:16:18.590Z,1478898978.590 [DataOverHttps](INFO): SBD MOMSN=4555769
2016-11-11T21:16:18.693Z,1478898978.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:19.200Z,1478898979.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:19.997Z,1478898979.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:20.028Z,1478898980.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:20.045Z,1478898980.045 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T21:16:20.045Z,1478898980.045 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T21:16:20.045Z,1478898980.046 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T21:16:20.173Z,1478898980.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:20.408Z,1478898980.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:21.204Z,1478898981.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:22.001Z,1478898982.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:22.412Z,1478898982.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:23.208Z,1478898983.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:23.630Z,1478898983.630 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:23.630Z,1478898983.630 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 308
2016-11-11T21:16:23.630Z,1478898983.630 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T21:16:23.637Z,1478898983.636 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:23.637Z,1478898983.637 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 308
2016-11-11T21:16:23.637Z,1478898983.637 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T21:16:23.639Z,1478898983.639 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:23.639Z,1478898983.639 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 308
2016-11-11T21:16:23.639Z,1478898983.639 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:16:23.685Z,1478898983.685 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T21:16:23.686Z,1478898983.686 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T21:16:23.686Z,1478898983.686 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:16:23.828Z,1478898983.828 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T21:16:23.828Z,1478898983.828 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 308
2016-11-11T21:16:23.829Z,1478898983.829 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T21:16:23.829Z,1478898983.829 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 308
2016-11-11T21:16:23.829Z,1478898983.829 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:16:23.830Z,1478898983.829 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 308
2016-11-11T21:16:24.005Z,1478898984.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:24.177Z,1478898984.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T21:16:24.178Z,1478898984.178 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:16:24.178Z,1478898984.178 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:16:24.183Z,1478898984.183 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T21:16:24.184Z,1478898984.184 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:16:24.184Z,1478898984.184 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:16:24.184Z,1478898984.184 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:16:24.185Z,1478898984.185 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:16:24.185Z,1478898984.185 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:16:24.420Z,1478898984.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:24.576Z,1478898984.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:24.944Z,1478898984.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:25.216Z,1478898985.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:25.337Z,1478898985.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:25.759Z,1478898985.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:26.012Z,1478898986.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:26.139Z,1478898986.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:26.536Z,1478898986.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:26.808Z,1478898986.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:26.933Z,1478898986.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:27.341Z,1478898987.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:27.604Z,1478898987.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:27.737Z,1478898987.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:28.137Z,1478898988.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:28.400Z,1478898988.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:28.537Z,1478898988.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:28.951Z,1478898988.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:29.196Z,1478898989.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:29.352Z,1478898989.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:29.741Z,1478898989.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:29.992Z,1478898989.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:30.136Z,1478898990.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:30.541Z,1478898990.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:30.788Z,1478898990.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:30.942Z,1478898990.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:31.345Z,1478898991.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:31.584Z,1478898991.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:31.737Z,1478898991.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:32.153Z,1478898992.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:32.380Z,1478898992.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:32.536Z,1478898992.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:32.991Z,1478898992.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:33.176Z,1478898993.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:33.351Z,1478898993.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:33.753Z,1478898993.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:33.973Z,1478898993.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:34.133Z,1478898994.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:34.541Z,1478898994.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:34.768Z,1478898994.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:34.937Z,1478898994.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:35.337Z,1478898995.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:35.564Z,1478898995.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:35.741Z,1478898995.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:36.154Z,1478898996.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:36.360Z,1478898996.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:36.572Z,1478898996.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:36.905Z,1478898996.905 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T21:16:36.942Z,1478898996.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:37.156Z,1478898997.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:37.392Z,1478898997.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:37.741Z,1478898997.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:37.952Z,1478898997.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:38.175Z,1478898998.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:38.558Z,1478898998.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:38.748Z,1478898998.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:38.943Z,1478898998.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:39.343Z,1478898999.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:39.544Z,1478898999.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:39.749Z,1478898999.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:40.144Z,1478899000.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:40.340Z,1478899000.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:40.545Z,1478899000.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:40.949Z,1478899000.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:41.136Z,1478899001.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:41.337Z,1478899001.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:41.737Z,1478899001.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:41.932Z,1478899001.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:42.142Z,1478899002.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:42.504Z,1478899002.504 [NAL9602](INFO): Powering down
2016-11-11T21:16:42.539Z,1478899002.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:42.728Z,1478899002.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:42.937Z,1478899002.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:43.336Z,1478899003.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:43.524Z,1478899003.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:43.737Z,1478899003.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:44.136Z,1478899004.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:44.320Z,1478899004.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:44.532Z,1478899004.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:44.936Z,1478899004.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:45.116Z,1478899005.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:45.474Z,1478899005.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:45.745Z,1478899005.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:45.792Z,1478899005.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:46.137Z,1478899006.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:46.200Z,1478899006.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:46.554Z,1478899006.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:46.608Z,1478899006.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:46.949Z,1478899006.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:47.016Z,1478899007.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:47.363Z,1478899007.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:47.424Z,1478899007.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:47.768Z,1478899007.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:47.832Z,1478899007.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:48.153Z,1478899008.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:48.240Z,1478899008.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:48.549Z,1478899008.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:48.648Z,1478899008.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:48.967Z,1478899008.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:49.056Z,1478899009.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:49.327Z,1478899009.327 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T21:16:49.327Z,1478899009.327 [BPC1] Data Fault, FailCount= 1
2016-11-11T21:16:49.327Z,1478899009.327 [BPC1](ERROR): Data Fault
2016-11-11T21:16:49.371Z,1478899009.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:49.431Z,1478899009.431 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T21:16:49.464Z,1478899009.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:49.762Z,1478899009.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:49.872Z,1478899009.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:50.142Z,1478899010.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:50.280Z,1478899010.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:50.554Z,1478899010.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:50.616Z,1478899010.616 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:16:50.616Z,1478899010.616 [BPC1] No Fault, FailCount= 1
2016-11-11T21:16:50.688Z,1478899010.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:51.033Z,1478899011.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:51.385Z,1478899011.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:51.484Z,1478899011.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:51.753Z,1478899011.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:52.151Z,1478899012.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:52.280Z,1478899012.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:52.582Z,1478899012.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:52.688Z,1478899012.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:52.953Z,1478899012.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:53.371Z,1478899013.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:53.484Z,1478899013.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:53.767Z,1478899013.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:54.159Z,1478899014.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:54.280Z,1478899014.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:54.545Z,1478899014.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:54.688Z,1478899014.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:54.941Z,1478899014.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:55.355Z,1478899015.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:55.484Z,1478899015.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:55.748Z,1478899015.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:56.141Z,1478899016.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:56.280Z,1478899016.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:56.572Z,1478899016.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:56.808Z,1478899016.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:56.967Z,1478899016.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:57.373Z,1478899017.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:57.604Z,1478899017.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:57.749Z,1478899017.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:58.158Z,1478899018.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:58.403Z,1478899018.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:58.567Z,1478899018.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:58.816Z,1478899018.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:58.984Z,1478899018.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:59.364Z,1478899019.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:16:59.612Z,1478899019.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:16:59.752Z,1478899019.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:00.149Z,1478899020.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:00.328Z,1478899020.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:00.552Z,1478899020.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:00.977Z,1478899020.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:01.124Z,1478899021.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:01.352Z,1478899021.352 [PNI_TCM](ERROR): CRC does not match. Expected:0x18075 got:0x6335
2016-11-11T21:17:01.370Z,1478899021.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:01.749Z,1478899021.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:01.920Z,1478899021.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:02.196Z,1478899022.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:02.332Z,1478899022.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:02.560Z,1478899022.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:02.957Z,1478899022.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:03.128Z,1478899023.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:03.434Z,1478899023.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:03.765Z,1478899023.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:03.925Z,1478899023.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:04.177Z,1478899024.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:04.344Z,1478899024.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:04.558Z,1478899024.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:04.985Z,1478899024.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:05.140Z,1478899025.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:05.367Z,1478899025.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:05.778Z,1478899025.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:05.936Z,1478899025.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:06.158Z,1478899026.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:06.344Z,1478899026.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:06.556Z,1478899026.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:06.984Z,1478899026.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:07.140Z,1478899027.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:07.354Z,1478899027.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:07.750Z,1478899027.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:07.936Z,1478899027.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:08.183Z,1478899028.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:08.440Z,1478899028.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:08.577Z,1478899028.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:08.966Z,1478899028.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:09.236Z,1478899029.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:09.358Z,1478899029.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:09.753Z,1478899029.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:10.034Z,1478899030.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:10.164Z,1478899030.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:10.570Z,1478899030.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:10.768Z,1478899030.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:10.977Z,1478899030.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:11.367Z,1478899031.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:11.564Z,1478899031.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:11.754Z,1478899031.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:12.157Z,1478899032.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:12.361Z,1478899032.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:12.586Z,1478899032.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:12.773Z,1478899032.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:12.958Z,1478899032.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:13.349Z,1478899033.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:13.568Z,1478899033.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:13.760Z,1478899033.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:14.146Z,1478899034.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:14.304Z,1478899034.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:14.554Z,1478899034.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:14.970Z,1478899034.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:15.100Z,1478899035.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:15.370Z,1478899035.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:15.737Z,1478899035.737 [PNI_TCM](ERROR): CRC does not match. Expected:0x39592 got:0x43527
2016-11-11T21:17:15.769Z,1478899035.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:15.897Z,1478899035.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:16.157Z,1478899036.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:16.308Z,1478899036.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:16.550Z,1478899036.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:16.957Z,1478899036.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:17.104Z,1478899037.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:17.421Z,1478899037.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:17.810Z,1478899037.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:17.901Z,1478899037.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:18.147Z,1478899038.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:18.312Z,1478899038.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:18.593Z,1478899038.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:18.954Z,1478899038.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:19.108Z,1478899039.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:19.369Z,1478899039.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:19.774Z,1478899039.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:19.905Z,1478899039.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:20.154Z,1478899040.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:20.316Z,1478899040.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:20.557Z,1478899040.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:21.112Z,1478899041.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:21.908Z,1478899041.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:22.392Z,1478899042.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:23.188Z,1478899043.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:23.984Z,1478899043.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:24.764Z,1478899044.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:25.560Z,1478899045.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:26.356Z,1478899046.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:26.578Z,1478899046.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:26.721Z,1478899046.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:27.075Z,1478899047.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:27.152Z,1478899047.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:27.477Z,1478899047.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:27.909Z,1478899047.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:27.948Z,1478899047.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:28.275Z,1478899048.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:28.690Z,1478899048.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:28.744Z,1478899048.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:29.085Z,1478899049.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:29.477Z,1478899049.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:29.540Z,1478899049.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:29.904Z,1478899049.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:30.368Z,1478899050.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:30.433Z,1478899050.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:30.681Z,1478899050.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:31.084Z,1478899051.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:31.165Z,1478899051.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:31.485Z,1478899051.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:31.945Z,1478899051.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:31.960Z,1478899051.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:32.274Z,1478899052.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:32.675Z,1478899052.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:32.756Z,1478899052.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:33.112Z,1478899053.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:33.482Z,1478899053.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:33.552Z,1478899053.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:33.921Z,1478899053.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:34.299Z,1478899054.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:34.348Z,1478899054.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:34.689Z,1478899054.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:35.078Z,1478899055.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:35.144Z,1478899055.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:35.489Z,1478899055.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:35.888Z,1478899055.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:35.941Z,1478899055.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:36.287Z,1478899056.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:36.690Z,1478899056.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:36.736Z,1478899056.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:37.088Z,1478899057.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:37.481Z,1478899057.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:37.532Z,1478899057.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:37.895Z,1478899057.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:38.301Z,1478899058.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:38.330Z,1478899058.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:38.692Z,1478899058.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:39.067Z,1478899059.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:39.124Z,1478899059.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:39.499Z,1478899059.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:39.874Z,1478899059.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:39.920Z,1478899059.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:40.273Z,1478899060.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:40.681Z,1478899060.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:40.716Z,1478899060.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:41.075Z,1478899061.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:41.477Z,1478899061.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:41.512Z,1478899061.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:41.891Z,1478899061.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:42.276Z,1478899062.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:42.308Z,1478899062.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:42.683Z,1478899062.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:43.004Z,1478899063.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:43.083Z,1478899063.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:43.414Z,1478899063.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:43.505Z,1478899063.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:43.825Z,1478899063.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:43.925Z,1478899063.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:44.249Z,1478899064.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:44.281Z,1478899064.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:44.656Z,1478899064.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:44.686Z,1478899064.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:45.064Z,1478899065.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:45.086Z,1478899065.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:45.472Z,1478899065.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:45.501Z,1478899065.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:45.880Z,1478899065.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:45.934Z,1478899065.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:46.288Z,1478899066.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:46.329Z,1478899066.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:46.681Z,1478899066.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:46.696Z,1478899066.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:47.104Z,1478899067.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:47.111Z,1478899067.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:47.481Z,1478899067.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:47.900Z,1478899067.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:47.938Z,1478899067.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:48.276Z,1478899068.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:48.308Z,1478899068.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:48.712Z,1478899068.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:49.081Z,1478899069.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:49.108Z,1478899069.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:49.475Z,1478899069.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:49.881Z,1478899069.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:49.964Z,1478899069.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:50.284Z,1478899070.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:50.380Z,1478899070.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:50.684Z,1478899070.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:51.087Z,1478899071.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:51.176Z,1478899071.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:51.484Z,1478899071.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:51.884Z,1478899071.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:51.972Z,1478899071.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:52.325Z,1478899072.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:52.681Z,1478899072.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:52.732Z,1478899072.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:53.075Z,1478899073.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:53.474Z,1478899073.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:53.528Z,1478899073.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:53.881Z,1478899073.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:54.325Z,1478899074.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:54.344Z,1478899074.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:54.693Z,1478899074.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:54.736Z,1478899074.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:55.084Z,1478899075.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:55.484Z,1478899075.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:55.532Z,1478899075.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:55.929Z,1478899075.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:56.236Z,1478899076.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:56.293Z,1478899076.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:56.685Z,1478899076.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:57.032Z,1478899077.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:57.090Z,1478899077.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:57.488Z,1478899077.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:57.834Z,1478899077.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:57.908Z,1478899077.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:58.265Z,1478899078.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:58.297Z,1478899078.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:58.675Z,1478899078.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:59.060Z,1478899079.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:59.077Z,1478899079.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:59.475Z,1478899079.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:17:59.856Z,1478899079.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:17:59.916Z,1478899079.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:00.264Z,1478899080.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:00.280Z,1478899080.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:00.745Z,1478899080.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:01.060Z,1478899081.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:01.091Z,1478899081.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:01.501Z,1478899081.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:01.857Z,1478899081.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:01.908Z,1478899081.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:02.268Z,1478899082.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:02.302Z,1478899082.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:02.705Z,1478899082.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:03.064Z,1478899083.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:03.070Z,1478899083.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:03.496Z,1478899083.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:03.860Z,1478899083.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:03.911Z,1478899083.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:04.276Z,1478899084.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:04.328Z,1478899084.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:04.675Z,1478899084.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:05.076Z,1478899085.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:05.124Z,1478899085.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:05.474Z,1478899085.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:05.875Z,1478899085.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:05.920Z,1478899085.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:06.354Z,1478899086.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:06.687Z,1478899086.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:06.692Z,1478899086.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:07.073Z,1478899087.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:07.473Z,1478899087.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:07.488Z,1478899087.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:07.897Z,1478899087.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:08.289Z,1478899088.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:08.374Z,1478899088.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:08.681Z,1478899088.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:08.700Z,1478899088.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:09.080Z,1478899089.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:09.485Z,1478899089.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:09.496Z,1478899089.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:09.900Z,1478899089.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:10.208Z,1478899090.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:10.293Z,1478899090.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:10.697Z,1478899090.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:11.004Z,1478899091.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:11.096Z,1478899091.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:11.498Z,1478899091.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:11.801Z,1478899091.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:11.901Z,1478899091.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:12.212Z,1478899092.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:12.282Z,1478899092.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:12.675Z,1478899092.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:13.008Z,1478899093.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:13.081Z,1478899093.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:13.475Z,1478899093.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:13.805Z,1478899093.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:13.893Z,1478899093.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:14.239Z,1478899094.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:14.289Z,1478899094.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:14.706Z,1478899094.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:15.036Z,1478899095.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:15.102Z,1478899095.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:15.485Z,1478899095.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:15.832Z,1478899095.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:15.901Z,1478899095.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:16.242Z,1478899096.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:16.305Z,1478899096.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:16.677Z,1478899096.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:17.036Z,1478899097.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:17.109Z,1478899097.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:17.502Z,1478899097.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:17.832Z,1478899097.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:17.942Z,1478899097.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:18.276Z,1478899098.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:18.308Z,1478899098.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:18.673Z,1478899098.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:19.075Z,1478899099.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:19.104Z,1478899099.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:19.475Z,1478899099.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:19.885Z,1478899099.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:19.900Z,1478899099.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:20.314Z,1478899100.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:20.680Z,1478899100.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:20.696Z,1478899100.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:21.112Z,1478899101.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:21.908Z,1478899101.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:22.676Z,1478899102.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:23.472Z,1478899103.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:24.100Z,1478899104.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:24.188Z,1478899104.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:24.237Z,1478899104.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:24.626Z,1478899104.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:24.986Z,1478899104.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:25.033Z,1478899105.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:25.432Z,1478899105.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:25.780Z,1478899105.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:25.875Z,1478899105.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:26.200Z,1478899106.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:26.217Z,1478899106.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:26.645Z,1478899106.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:26.996Z,1478899106.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:27.022Z,1478899107.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:27.425Z,1478899107.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:27.794Z,1478899107.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:27.847Z,1478899107.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:28.225Z,1478899108.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:28.236Z,1478899108.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:28.629Z,1478899108.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:29.025Z,1478899109.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:29.032Z,1478899109.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:29.472Z,1478899109.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:29.828Z,1478899109.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:29.850Z,1478899109.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:30.236Z,1478899110.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:30.263Z,1478899110.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:30.627Z,1478899110.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:31.032Z,1478899111.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:31.046Z,1478899111.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:31.468Z,1478899111.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:31.821Z,1478899111.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:31.828Z,1478899111.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:32.232Z,1478899112.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:32.296Z,1478899112.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:32.625Z,1478899112.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:33.037Z,1478899113.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:33.092Z,1478899113.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:33.440Z,1478899113.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:33.812Z,1478899113.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:33.888Z,1478899113.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:34.278Z,1478899114.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:34.621Z,1478899114.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:34.660Z,1478899114.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:35.019Z,1478899115.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:35.427Z,1478899115.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:35.456Z,1478899115.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:35.825Z,1478899115.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:36.252Z,1478899116.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:36.280Z,1478899116.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:36.628Z,1478899116.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:36.664Z,1478899116.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:37.032Z,1478899117.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:37.428Z,1478899117.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:37.464Z,1478899117.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:37.850Z,1478899117.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:38.188Z,1478899118.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:38.225Z,1478899118.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:38.620Z,1478899118.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:38.984Z,1478899118.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:39.041Z,1478899119.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:39.431Z,1478899119.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:39.780Z,1478899119.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:39.861Z,1478899119.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:40.192Z,1478899120.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:40.241Z,1478899120.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:40.633Z,1478899120.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:40.988Z,1478899120.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:41.029Z,1478899121.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:41.433Z,1478899121.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:41.786Z,1478899121.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:41.862Z,1478899121.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:42.196Z,1478899122.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:42.207Z,1478899122.207 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T21:18:42.208Z,1478899122.208 [BPC1] Data Fault, FailCount= 1
2016-11-11T21:18:42.208Z,1478899122.208 [BPC1](ERROR): Data Fault
2016-11-11T21:18:42.225Z,1478899122.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:42.267Z,1478899122.267 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T21:18:42.633Z,1478899122.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:42.993Z,1478899122.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:43.037Z,1478899123.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:43.422Z,1478899123.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:43.443Z,1478899123.443 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:18:43.443Z,1478899123.443 [BPC1] No Fault, FailCount= 1
2016-11-11T21:18:43.788Z,1478899123.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:43.922Z,1478899123.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:44.197Z,1478899124.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:44.245Z,1478899124.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:44.633Z,1478899124.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:44.993Z,1478899124.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:45.037Z,1478899125.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:45.416Z,1478899125.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:45.788Z,1478899125.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:45.813Z,1478899125.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:46.219Z,1478899126.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:46.268Z,1478899126.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:46.625Z,1478899126.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:47.019Z,1478899127.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:47.064Z,1478899127.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:47.433Z,1478899127.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:47.830Z,1478899127.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:47.860Z,1478899127.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:48.286Z,1478899128.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:48.624Z,1478899128.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:48.634Z,1478899128.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:49.028Z,1478899129.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:49.420Z,1478899129.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:49.424Z,1478899129.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:49.831Z,1478899129.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:50.216Z,1478899130.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:50.303Z,1478899130.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:50.616Z,1478899130.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:50.628Z,1478899130.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:51.025Z,1478899131.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:51.424Z,1478899131.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:51.426Z,1478899131.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:51.813Z,1478899131.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:52.220Z,1478899132.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:52.274Z,1478899132.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:52.621Z,1478899132.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:52.628Z,1478899132.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:53.028Z,1478899133.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:53.424Z,1478899133.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:53.430Z,1478899133.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:53.842Z,1478899133.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:54.144Z,1478899134.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:54.233Z,1478899134.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:54.617Z,1478899134.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:54.940Z,1478899134.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:55.018Z,1478899135.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:55.419Z,1478899135.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:55.737Z,1478899135.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:55.835Z,1478899135.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:56.148Z,1478899136.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:56.273Z,1478899136.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:56.653Z,1478899136.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:56.944Z,1478899136.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:57.017Z,1478899137.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:57.417Z,1478899137.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:57.741Z,1478899137.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:57.842Z,1478899137.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:58.152Z,1478899138.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:58.249Z,1478899138.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:58.625Z,1478899138.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:58.948Z,1478899138.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:59.061Z,1478899139.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:59.461Z,1478899139.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:18:59.744Z,1478899139.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:18:59.880Z,1478899139.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:00.219Z,1478899140.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:00.264Z,1478899140.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:00.633Z,1478899140.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:01.030Z,1478899141.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:01.060Z,1478899141.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:01.430Z,1478899141.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:01.828Z,1478899141.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:01.856Z,1478899141.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:02.274Z,1478899142.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:02.622Z,1478899142.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:02.644Z,1478899142.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:03.029Z,1478899143.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:03.429Z,1478899143.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:03.440Z,1478899143.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:03.829Z,1478899143.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:04.236Z,1478899144.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:04.290Z,1478899144.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:04.632Z,1478899144.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:04.644Z,1478899144.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:05.024Z,1478899145.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:05.438Z,1478899145.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:05.440Z,1478899145.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:05.833Z,1478899145.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:06.132Z,1478899146.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:06.226Z,1478899146.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:06.617Z,1478899146.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:06.930Z,1478899146.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:07.026Z,1478899147.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:07.420Z,1478899147.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:07.725Z,1478899147.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:07.818Z,1478899147.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:08.136Z,1478899148.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:08.222Z,1478899148.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:08.619Z,1478899148.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:08.936Z,1478899148.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:09.023Z,1478899149.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:09.422Z,1478899149.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:09.733Z,1478899149.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:09.828Z,1478899149.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:10.144Z,1478899150.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:10.226Z,1478899150.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:10.629Z,1478899150.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:10.940Z,1478899150.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:11.049Z,1478899151.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:11.429Z,1478899151.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:11.737Z,1478899151.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:11.853Z,1478899151.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:12.148Z,1478899152.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:12.228Z,1478899152.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:12.631Z,1478899152.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:12.944Z,1478899152.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:13.045Z,1478899153.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:13.432Z,1478899153.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:13.740Z,1478899153.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:13.898Z,1478899153.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:14.245Z,1478899154.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:14.272Z,1478899154.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:14.612Z,1478899154.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:15.042Z,1478899155.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:15.076Z,1478899155.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:15.440Z,1478899155.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:15.840Z,1478899155.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:15.872Z,1478899155.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:16.261Z,1478899156.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:16.580Z,1478899156.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:16.614Z,1478899156.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:17.025Z,1478899157.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:17.376Z,1478899157.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:17.427Z,1478899157.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:17.825Z,1478899157.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:18.180Z,1478899158.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:18.256Z,1478899158.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:18.612Z,1478899158.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:18.621Z,1478899158.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:19.025Z,1478899159.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:19.408Z,1478899159.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:19.430Z,1478899159.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:19.840Z,1478899159.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:20.108Z,1478899160.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:20.232Z,1478899160.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:20.625Z,1478899160.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:20.904Z,1478899160.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:21.032Z,1478899161.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:21.701Z,1478899161.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:22.112Z,1478899162.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:22.908Z,1478899162.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:23.705Z,1478899163.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:24.120Z,1478899164.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:24.485Z,1478899164.485 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:24.486Z,1478899164.486 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 309
2016-11-11T21:19:24.486Z,1478899164.486 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T21:19:24.492Z,1478899164.492 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:24.492Z,1478899164.492 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 309
2016-11-11T21:19:24.493Z,1478899164.493 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T21:19:24.495Z,1478899164.494 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:24.495Z,1478899164.495 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 309
2016-11-11T21:19:24.495Z,1478899164.495 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:19:24.509Z,1478899164.509 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T21:19:24.509Z,1478899164.509 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T21:19:24.509Z,1478899164.509 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:19:24.678Z,1478899164.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T21:19:24.678Z,1478899164.678 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 309
2016-11-11T21:19:24.683Z,1478899164.683 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T21:19:24.683Z,1478899164.684 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 309
2016-11-11T21:19:24.684Z,1478899164.684 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:19:24.684Z,1478899164.684 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 309
2016-11-11T21:19:24.916Z,1478899164.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:24.994Z,1478899164.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T21:19:24.994Z,1478899164.994 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:19:24.995Z,1478899164.995 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:19:24.999Z,1478899165.000 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T21:19:25.000Z,1478899165.000 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:19:25.000Z,1478899165.000 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:19:25.001Z,1478899165.001 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:19:25.001Z,1478899165.001 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:19:25.002Z,1478899165.002 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:19:25.401Z,1478899165.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:25.713Z,1478899165.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:25.797Z,1478899165.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:26.157Z,1478899166.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:26.213Z,1478899166.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:26.613Z,1478899166.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:26.952Z,1478899166.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:26.993Z,1478899166.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:27.387Z,1478899167.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:27.750Z,1478899167.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:27.858Z,1478899167.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:28.196Z,1478899168.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:28.224Z,1478899168.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:28.607Z,1478899168.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:29.014Z,1478899169.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:29.020Z,1478899169.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:29.381Z,1478899169.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:29.785Z,1478899169.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:29.816Z,1478899169.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:30.241Z,1478899170.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:30.588Z,1478899170.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:30.596Z,1478899170.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:30.994Z,1478899170.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:31.386Z,1478899171.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:31.392Z,1478899171.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:31.782Z,1478899171.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:32.188Z,1478899172.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:32.218Z,1478899172.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:32.594Z,1478899172.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:32.596Z,1478899172.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:32.988Z,1478899172.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:33.392Z,1478899173.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:33.394Z,1478899173.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:33.785Z,1478899173.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:34.084Z,1478899174.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:34.192Z,1478899174.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:34.594Z,1478899174.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:34.880Z,1478899174.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:35.013Z,1478899175.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:35.392Z,1478899175.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:35.682Z,1478899175.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:35.799Z,1478899175.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:36.108Z,1478899176.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:36.197Z,1478899176.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:36.604Z,1478899176.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:36.904Z,1478899176.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:36.993Z,1478899176.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:37.393Z,1478899177.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:37.701Z,1478899177.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:37.797Z,1478899177.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:38.112Z,1478899178.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:38.193Z,1478899178.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:38.600Z,1478899178.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:38.908Z,1478899178.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:38.996Z,1478899178.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:39.389Z,1478899179.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:39.704Z,1478899179.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:39.795Z,1478899179.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:40.112Z,1478899180.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:40.189Z,1478899180.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:40.596Z,1478899180.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:40.908Z,1478899180.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:41.037Z,1478899181.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:41.376Z,1478899181.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:41.704Z,1478899181.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:41.882Z,1478899181.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:42.187Z,1478899182.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:42.216Z,1478899182.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:42.618Z,1478899182.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:43.012Z,1478899183.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:43.020Z,1478899183.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:43.388Z,1478899183.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:43.785Z,1478899183.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:43.820Z,1478899183.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:44.220Z,1478899184.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:44.549Z,1478899184.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:44.577Z,1478899184.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:45.001Z,1478899185.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:45.344Z,1478899185.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:45.405Z,1478899185.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:45.783Z,1478899185.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:46.140Z,1478899186.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:46.214Z,1478899186.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:46.553Z,1478899186.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:46.596Z,1478899186.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:46.990Z,1478899186.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:47.350Z,1478899187.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:47.393Z,1478899187.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:47.797Z,1478899187.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:48.060Z,1478899188.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:48.179Z,1478899188.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:48.581Z,1478899188.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:48.856Z,1478899188.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:48.985Z,1478899188.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:49.385Z,1478899189.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:49.653Z,1478899189.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:49.793Z,1478899189.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:50.064Z,1478899190.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:50.189Z,1478899190.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:50.584Z,1478899190.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:50.860Z,1478899190.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:50.993Z,1478899190.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:51.390Z,1478899191.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:51.668Z,1478899191.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:51.821Z,1478899191.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:52.084Z,1478899192.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:52.202Z,1478899192.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:52.605Z,1478899192.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:52.880Z,1478899192.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:53.004Z,1478899193.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:53.405Z,1478899193.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:53.677Z,1478899193.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:53.792Z,1478899193.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:54.088Z,1478899194.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:54.197Z,1478899194.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:54.589Z,1478899194.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:54.884Z,1478899194.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:54.997Z,1478899194.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:55.433Z,1478899195.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:55.680Z,1478899195.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:55.838Z,1478899195.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:56.180Z,1478899196.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:56.217Z,1478899196.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:56.589Z,1478899196.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:56.976Z,1478899196.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:57.025Z,1478899197.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:57.384Z,1478899197.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:57.772Z,1478899197.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:57.825Z,1478899197.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:58.202Z,1478899198.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:58.516Z,1478899198.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:58.594Z,1478899198.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:58.999Z,1478899198.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:59.312Z,1478899199.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:19:59.391Z,1478899199.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:19:59.793Z,1478899199.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:00.109Z,1478899200.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:00.201Z,1478899200.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:00.520Z,1478899200.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:00.601Z,1478899200.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:00.981Z,1478899200.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:01.316Z,1478899201.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:01.376Z,1478899201.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:01.788Z,1478899201.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:02.040Z,1478899202.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:02.183Z,1478899202.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:02.583Z,1478899202.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:02.836Z,1478899202.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:02.983Z,1478899202.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:03.383Z,1478899203.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:03.633Z,1478899203.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:03.791Z,1478899203.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:04.044Z,1478899204.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:04.185Z,1478899204.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:04.593Z,1478899204.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:04.840Z,1478899204.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:04.993Z,1478899204.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:05.393Z,1478899205.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:05.637Z,1478899205.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:05.792Z,1478899205.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:06.048Z,1478899206.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:06.196Z,1478899206.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:06.596Z,1478899206.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:06.844Z,1478899206.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:06.989Z,1478899206.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:07.405Z,1478899207.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:07.641Z,1478899207.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:07.798Z,1478899207.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:08.052Z,1478899208.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:08.185Z,1478899208.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:08.590Z,1478899208.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:08.848Z,1478899208.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:08.987Z,1478899208.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:09.429Z,1478899209.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:09.644Z,1478899209.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:09.854Z,1478899209.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:10.192Z,1478899210.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:10.193Z,1478899210.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:10.634Z,1478899210.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:10.988Z,1478899210.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:10.997Z,1478899210.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:11.413Z,1478899211.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:11.785Z,1478899211.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:11.802Z,1478899211.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:12.189Z,1478899212.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:12.500Z,1478899212.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:12.594Z,1478899212.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:12.983Z,1478899212.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:13.296Z,1478899213.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:13.393Z,1478899213.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:13.784Z,1478899213.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:14.093Z,1478899214.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:14.189Z,1478899214.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:14.504Z,1478899214.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:14.594Z,1478899214.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:14.986Z,1478899214.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:15.300Z,1478899215.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:15.396Z,1478899215.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:15.794Z,1478899215.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:16.022Z,1478899216.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:16.193Z,1478899216.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:16.597Z,1478899216.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:16.816Z,1478899216.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:16.996Z,1478899216.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:17.392Z,1478899217.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:17.617Z,1478899217.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:17.792Z,1478899217.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:18.040Z,1478899218.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:18.188Z,1478899218.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:18.600Z,1478899218.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:18.836Z,1478899218.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:19.002Z,1478899219.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:19.403Z,1478899219.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:19.633Z,1478899219.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:19.800Z,1478899219.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:20.044Z,1478899220.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:20.199Z,1478899220.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:20.604Z,1478899220.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:20.840Z,1478899220.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:20.976Z,1478899220.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:21.381Z,1478899221.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:21.642Z,1478899221.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:22.052Z,1478899222.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:22.848Z,1478899222.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:23.644Z,1478899223.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:24.128Z,1478899224.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:24.928Z,1478899224.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:25.038Z,1478899225.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:25.142Z,1478899225.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:25.569Z,1478899225.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:25.724Z,1478899225.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:25.936Z,1478899225.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:26.373Z,1478899226.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:26.476Z,1478899226.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:26.773Z,1478899226.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:27.135Z,1478899227.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:27.272Z,1478899227.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:27.536Z,1478899227.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:27.939Z,1478899227.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:28.080Z,1478899228.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:28.341Z,1478899228.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:28.496Z,1478899228.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:28.735Z,1478899228.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:29.141Z,1478899229.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:29.292Z,1478899229.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:29.541Z,1478899229.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:29.946Z,1478899229.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:29.000Z,1478899230.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:30.345Z,1478899230.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:30.746Z,1478899230.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:30.796Z,1478899230.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:31.138Z,1478899231.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:31.544Z,1478899231.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:31.592Z,1478899231.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:31.945Z,1478899231.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:32.012Z,1478899232.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:32.338Z,1478899232.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:32.744Z,1478899232.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:32.808Z,1478899232.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:33.149Z,1478899233.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:33.538Z,1478899233.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:33.604Z,1478899233.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:33.949Z,1478899233.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:34.020Z,1478899234.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:34.333Z,1478899234.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:34.734Z,1478899234.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:34.816Z,1478899234.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:35.133Z,1478899235.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:35.536Z,1478899235.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:35.613Z,1478899235.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:35.935Z,1478899235.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:36.024Z,1478899236.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:36.339Z,1478899236.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:36.741Z,1478899236.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:36.820Z,1478899236.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:37.142Z,1478899237.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:37.541Z,1478899237.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:37.616Z,1478899237.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:37.949Z,1478899237.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:38.120Z,1478899238.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:38.393Z,1478899238.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:38.747Z,1478899238.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:38.916Z,1478899238.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:39.142Z,1478899239.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:39.561Z,1478899239.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:39.712Z,1478899239.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:39.953Z,1478899239.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:40.384Z,1478899240.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:40.456Z,1478899240.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:40.784Z,1478899240.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:41.145Z,1478899241.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:41.252Z,1478899241.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:41.544Z,1478899241.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:41.938Z,1478899241.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:42.049Z,1478899242.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:42.333Z,1478899242.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:42.460Z,1478899242.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:42.733Z,1478899242.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:43.137Z,1478899243.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:43.256Z,1478899243.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:43.573Z,1478899243.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:43.945Z,1478899243.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:43.992Z,1478899243.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:44.338Z,1478899244.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:44.745Z,1478899244.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:44.788Z,1478899244.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:45.145Z,1478899245.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:45.567Z,1478899245.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:45.584Z,1478899245.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:45.947Z,1478899245.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:46.004Z,1478899246.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:46.341Z,1478899246.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:46.728Z,1478899246.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:46.800Z,1478899246.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:47.133Z,1478899247.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:47.574Z,1478899247.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:47.596Z,1478899247.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:47.936Z,1478899247.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:48.004Z,1478899248.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:48.345Z,1478899248.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:48.746Z,1478899248.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:48.800Z,1478899248.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:49.136Z,1478899249.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:49.591Z,1478899249.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:49.596Z,1478899249.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:49.953Z,1478899249.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:50.004Z,1478899250.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:50.348Z,1478899250.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:50.750Z,1478899250.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:50.800Z,1478899250.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:51.153Z,1478899251.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:51.553Z,1478899251.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:51.596Z,1478899251.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:51.933Z,1478899251.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:52.068Z,1478899252.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:52.333Z,1478899252.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:52.774Z,1478899252.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:52.864Z,1478899252.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:53.189Z,1478899253.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:53.535Z,1478899253.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:53.661Z,1478899253.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:53.974Z,1478899253.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:54.336Z,1478899254.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:54.452Z,1478899254.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:54.762Z,1478899254.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:55.177Z,1478899255.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:55.248Z,1478899255.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:55.547Z,1478899255.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:55.952Z,1478899255.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:56.045Z,1478899256.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:56.348Z,1478899256.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:56.456Z,1478899256.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:56.747Z,1478899256.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:57.148Z,1478899257.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:57.252Z,1478899257.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:57.592Z,1478899257.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:57.941Z,1478899257.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:57.976Z,1478899257.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:58.335Z,1478899258.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:58.735Z,1478899258.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:58.772Z,1478899258.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:59.136Z,1478899259.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:59.568Z,1478899259.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:20:59.592Z,1478899259.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:59.946Z,1478899259.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:20:59.988Z,1478899259.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:00.345Z,1478899260.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:00.737Z,1478899260.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:00.784Z,1478899260.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:01.138Z,1478899261.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:01.580Z,1478899261.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:01.594Z,1478899261.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:01.941Z,1478899261.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:01.988Z,1478899261.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:02.341Z,1478899262.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:02.734Z,1478899262.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:02.784Z,1478899262.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:03.141Z,1478899263.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:03.580Z,1478899263.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:03.591Z,1478899263.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:03.945Z,1478899263.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:03.988Z,1478899263.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:04.345Z,1478899264.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:04.742Z,1478899264.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:04.784Z,1478899264.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:05.149Z,1478899265.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:05.551Z,1478899265.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:05.580Z,1478899265.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:05.949Z,1478899265.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:06.052Z,1478899266.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:06.347Z,1478899266.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:06.773Z,1478899266.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:06.848Z,1478899266.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:07.133Z,1478899267.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:07.531Z,1478899267.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:07.645Z,1478899267.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:07.931Z,1478899267.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:08.336Z,1478899268.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:08.412Z,1478899268.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:08.741Z,1478899268.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:09.141Z,1478899269.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:09.208Z,1478899269.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:09.543Z,1478899269.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:09.944Z,1478899269.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:10.005Z,1478899270.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:10.331Z,1478899270.330 [BPC1](ERROR): Failed to receive battery data
2016-11-11T21:21:10.331Z,1478899270.331 [BPC1] Communications Fault, FailCount= 1
2016-11-11T21:21:10.331Z,1478899270.331 [BPC1](ERROR): Communications Fault
2016-11-11T21:21:10.339Z,1478899270.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:10.359Z,1478899270.359 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T21:21:10.416Z,1478899270.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:10.743Z,1478899270.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:11.141Z,1478899271.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:11.212Z,1478899271.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:11.596Z,1478899271.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:11.641Z,1478899271.641 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:21:11.641Z,1478899271.641 [BPC1] No Fault, FailCount= 1
2016-11-11T21:21:11.932Z,1478899271.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:11.993Z,1478899271.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:12.339Z,1478899272.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:12.728Z,1478899272.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:12.775Z,1478899272.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:13.145Z,1478899273.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:13.524Z,1478899273.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:13.594Z,1478899273.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:13.952Z,1478899273.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:13.958Z,1478899273.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:14.348Z,1478899274.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:14.748Z,1478899274.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:14.748Z,1478899274.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:15.149Z,1478899275.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:15.546Z,1478899275.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:15.605Z,1478899275.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:15.932Z,1478899275.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:15.980Z,1478899275.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:16.331Z,1478899276.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:16.736Z,1478899276.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:16.776Z,1478899276.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:17.134Z,1478899277.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:17.572Z,1478899277.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:17.626Z,1478899277.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:17.943Z,1478899277.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:17.980Z,1478899277.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:18.362Z,1478899278.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:18.746Z,1478899278.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:18.776Z,1478899278.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:19.188Z,1478899279.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:19.565Z,1478899279.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:19.580Z,1478899279.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:19.933Z,1478899279.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:20.024Z,1478899280.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:20.333Z,1478899280.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:20.363Z,1478899280.363 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T21:21:20.367Z,1478899280.367 [Default:CheckIn:C.Wait] Stopped
2016-11-11T21:21:20.367Z,1478899280.367 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T21:21:20.367Z,1478899280.367 [Default:CheckIn:D] Running Loop=1
2016-11-11T21:21:20.733Z,1478899280.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:20.762Z,1478899280.762 [Default:CheckIn:D] Stopped
2016-11-11T21:21:20.762Z,1478899280.763 [Default:CheckIn:E] Running Loop=1
2016-11-11T21:21:20.820Z,1478899280.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:21.135Z,1478899281.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:21.172Z,1478899281.172 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 991.324219 min 
2016-11-11T21:21:21.172Z,1478899281.172 [Default:CheckIn:E] Stopped
2016-11-11T21:21:21.172Z,1478899281.172 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T21:21:21.172Z,1478899281.172 [Default:CheckIn] Stopped
2016-11-11T21:21:21.173Z,1478899281.173 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T21:21:21.173Z,1478899281.173 [Default:CheckIn](INFO): Running loop #96
2016-11-11T21:21:21.173Z,1478899281.173 [Default:CheckIn] Running Loop=96
2016-11-11T21:21:21.173Z,1478899281.173 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T21:21:21.173Z,1478899281.173 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T21:21:21.539Z,1478899281.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:21.616Z,1478899281.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:22.388Z,1478899282.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:23.184Z,1478899283.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:23.981Z,1478899283.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:24.396Z,1478899284.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:24.913Z,1478899284.913 [NAL9602](INFO): Powering up
2016-11-11T21:21:24.988Z,1478899284.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:25.105Z,1478899285.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:25.192Z,1478899285.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:25.542Z,1478899285.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:25.869Z,1478899285.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:25.928Z,1478899285.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:26.266Z,1478899286.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:26.661Z,1478899286.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:26.724Z,1478899286.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:27.067Z,1478899287.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:27.467Z,1478899287.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:27.521Z,1478899287.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:27.876Z,1478899287.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:27.940Z,1478899287.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:28.278Z,1478899288.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:28.671Z,1478899288.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:28.736Z,1478899288.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:29.085Z,1478899289.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:29.533Z,1478899289.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:29.527Z,1478899289.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:29.901Z,1478899289.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:29.940Z,1478899289.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:30.287Z,1478899290.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:30.688Z,1478899290.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:30.736Z,1478899290.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:31.081Z,1478899291.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:31.532Z,1478899291.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:31.541Z,1478899291.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:31.909Z,1478899291.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:32.267Z,1478899292.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:32.328Z,1478899292.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:32.697Z,1478899292.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:33.067Z,1478899293.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:33.124Z,1478899293.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:33.503Z,1478899293.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:33.913Z,1478899293.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:33.920Z,1478899293.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:34.267Z,1478899294.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:34.328Z,1478899294.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:34.668Z,1478899294.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:35.073Z,1478899295.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:35.124Z,1478899295.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:35.478Z,1478899295.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:35.828Z,1478899295.829 [NAL9602](INFO): NAL9602 initialized
2016-11-11T21:21:35.884Z,1478899295.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:35.920Z,1478899295.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:36.279Z,1478899296.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:36.372Z,1478899296.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:36.629Z,1478899296.629 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T21:21:36.629Z,1478899296.629 [NAL9602] Data Fault, FailCount= 4
2016-11-11T21:21:36.629Z,1478899296.629 [NAL9602](ERROR): Data Fault
2016-11-11T21:21:36.710Z,1478899296.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:36.780Z,1478899296.780 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T21:21:37.028Z,1478899297.028 [NAL9602](INFO): Powering down
2016-11-11T21:21:37.093Z,1478899297.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:37.168Z,1478899297.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:37.493Z,1478899297.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:37.900Z,1478899297.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:37.965Z,1478899297.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:38.022Z,1478899298.022 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T21:21:38.022Z,1478899298.022 [NAL9602] No Fault, FailCount= 4
2016-11-11T21:21:38.282Z,1478899298.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:38.376Z,1478899298.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:38.681Z,1478899298.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:39.100Z,1478899299.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:39.172Z,1478899299.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:39.546Z,1478899299.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:39.894Z,1478899299.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:39.900Z,1478899299.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:40.295Z,1478899300.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:40.678Z,1478899300.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:40.696Z,1478899300.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:41.074Z,1478899301.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:41.492Z,1478899301.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:41.557Z,1478899301.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:41.892Z,1478899301.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:41.912Z,1478899301.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:42.229Z,1478899302.229 [NAL9602](INFO): Powering up NAL9602
2016-11-11T21:21:42.302Z,1478899302.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:42.686Z,1478899302.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:42.708Z,1478899302.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:43.081Z,1478899303.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:43.504Z,1478899303.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:43.539Z,1478899303.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:43.870Z,1478899303.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:43.912Z,1478899303.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:44.307Z,1478899304.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:44.708Z,1478899304.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:44.730Z,1478899304.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:45.073Z,1478899305.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:45.504Z,1478899305.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:45.582Z,1478899305.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:45.874Z,1478899305.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:45.912Z,1478899305.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:46.314Z,1478899306.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:46.668Z,1478899306.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:46.708Z,1478899306.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:47.125Z,1478899307.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:47.490Z,1478899307.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:47.504Z,1478899307.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:47.873Z,1478899307.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:47.992Z,1478899307.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:48.272Z,1478899308.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:48.687Z,1478899308.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:48.788Z,1478899308.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:49.099Z,1478899309.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:49.488Z,1478899309.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:49.584Z,1478899309.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:49.967Z,1478899309.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:50.262Z,1478899310.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:50.336Z,1478899310.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:50.687Z,1478899310.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:51.097Z,1478899311.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:51.132Z,1478899311.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:51.466Z,1478899311.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:51.929Z,1478899311.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:51.966Z,1478899311.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:52.318Z,1478899312.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:52.340Z,1478899312.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:52.660Z,1478899312.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:53.075Z,1478899313.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:53.136Z,1478899313.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:53.446Z,1478899313.446 [NAL9602](INFO): NAL9602 initialized
2016-11-11T21:21:53.488Z,1478899313.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:53.869Z,1478899313.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:53.932Z,1478899313.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:54.279Z,1478899314.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:54.679Z,1478899314.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:54.728Z,1478899314.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:55.081Z,1478899315.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:55.477Z,1478899315.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:55.524Z,1478899315.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:55.873Z,1478899315.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:56.275Z,1478899316.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:56.320Z,1478899316.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:56.675Z,1478899316.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:57.075Z,1478899317.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:57.116Z,1478899317.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:57.481Z,1478899317.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:57.865Z,1478899317.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:57.912Z,1478899317.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:58.289Z,1478899318.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:58.661Z,1478899318.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:58.708Z,1478899318.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:59.070Z,1478899319.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:59.501Z,1478899319.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:21:59.504Z,1478899319.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:21:59.866Z,1478899319.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:00.262Z,1478899320.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:00.300Z,1478899320.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:00.698Z,1478899320.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:01.076Z,1478899321.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:01.096Z,1478899321.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:01.501Z,1478899321.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:01.892Z,1478899321.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:01.909Z,1478899321.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:02.276Z,1478899322.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:02.673Z,1478899322.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:02.688Z,1478899322.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:03.069Z,1478899323.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:03.484Z,1478899323.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:03.507Z,1478899323.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:03.877Z,1478899323.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:04.269Z,1478899324.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:04.280Z,1478899324.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:04.660Z,1478899324.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:05.064Z,1478899325.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:05.076Z,1478899325.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:05.473Z,1478899325.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:05.872Z,1478899325.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:05.889Z,1478899325.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:06.274Z,1478899326.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:06.668Z,1478899326.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:06.670Z,1478899326.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:07.064Z,1478899327.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:07.464Z,1478899327.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:07.472Z,1478899327.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:07.869Z,1478899327.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:08.260Z,1478899328.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:08.266Z,1478899328.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:08.664Z,1478899328.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:09.056Z,1478899329.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:09.062Z,1478899329.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:09.470Z,1478899329.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:09.852Z,1478899329.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:09.862Z,1478899329.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:10.280Z,1478899330.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:10.648Z,1478899330.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:10.676Z,1478899330.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:11.065Z,1478899331.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:11.444Z,1478899331.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:11.505Z,1478899331.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:11.864Z,1478899331.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:12.240Z,1478899332.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:12.266Z,1478899332.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:12.685Z,1478899332.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:13.038Z,1478899333.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:13.065Z,1478899333.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:13.465Z,1478899333.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:13.832Z,1478899333.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:13.893Z,1478899333.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:14.260Z,1478899334.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:14.628Z,1478899334.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:14.662Z,1478899334.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:15.109Z,1478899335.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:15.424Z,1478899335.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:15.464Z,1478899335.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:15.890Z,1478899335.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:16.228Z,1478899336.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:16.293Z,1478899336.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:16.664Z,1478899336.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:17.024Z,1478899337.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:17.077Z,1478899337.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:17.478Z,1478899337.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:17.833Z,1478899337.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:17.905Z,1478899337.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:18.261Z,1478899338.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:18.292Z,1478899338.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:18.682Z,1478899338.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:18.700Z,1478899338.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:19.089Z,1478899339.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:19.108Z,1478899339.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:19.497Z,1478899339.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:19.516Z,1478899339.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:19.924Z,1478899339.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:19.945Z,1478899339.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:20.278Z,1478899340.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:20.332Z,1478899340.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:20.681Z,1478899340.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:20.740Z,1478899340.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:21.079Z,1478899341.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:21.152Z,1478899341.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:21.493Z,1478899341.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:21.560Z,1478899341.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:21.881Z,1478899341.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:21.968Z,1478899341.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:22.376Z,1478899342.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:22.784Z,1478899342.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:23.192Z,1478899343.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:23.600Z,1478899343.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:24.008Z,1478899344.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:24.416Z,1478899344.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:25.212Z,1478899345.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:25.816Z,1478899345.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:26.612Z,1478899346.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:27.408Z,1478899347.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:27.820Z,1478899347.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:28.616Z,1478899348.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:29.412Z,1478899349.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:29.916Z,1478899349.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:30.712Z,1478899350.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:31.466Z,1478899351.466 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:31.466Z,1478899351.466 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 310
2016-11-11T21:22:31.466Z,1478899351.466 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-11T21:22:31.505Z,1478899351.505 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:31.505Z,1478899351.505 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 310
2016-11-11T21:22:31.506Z,1478899351.506 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-11T21:22:31.508Z,1478899351.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:31.516Z,1478899351.516 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:31.516Z,1478899351.516 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 310
2016-11-11T21:22:31.516Z,1478899351.516 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:22:31.553Z,1478899351.553 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-11T21:22:31.553Z,1478899351.553 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-11T21:22:31.553Z,1478899351.553 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:22:31.757Z,1478899351.757 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-11T21:22:31.757Z,1478899351.757 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 310
2016-11-11T21:22:31.758Z,1478899351.758 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-11T21:22:31.758Z,1478899351.758 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 310
2016-11-11T21:22:31.758Z,1478899351.758 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:22:31.758Z,1478899351.758 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 310
2016-11-11T21:22:32.048Z,1478899352.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-11T21:22:32.048Z,1478899352.048 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:22:32.049Z,1478899352.049 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:22:32.069Z,1478899352.069 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-11T21:22:32.070Z,1478899352.070 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:22:32.070Z,1478899352.070 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:22:32.071Z,1478899352.071 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:22:32.071Z,1478899352.071 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:22:32.072Z,1478899352.072 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:22:32.260Z,1478899352.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:32.431Z,1478899352.431 [PNI_TCM](ERROR): CRC does not match. Expected:0x32215 got:0x43548
2016-11-11T21:22:32.465Z,1478899352.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:32.834Z,1478899352.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:33.056Z,1478899353.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:33.249Z,1478899353.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:33.650Z,1478899353.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:33.853Z,1478899353.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:34.065Z,1478899354.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:34.284Z,1478899354.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:34.445Z,1478899354.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:34.838Z,1478899354.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:35.080Z,1478899355.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:35.246Z,1478899355.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:35.649Z,1478899355.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:35.812Z,1478899355.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:36.036Z,1478899356.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:36.445Z,1478899356.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:36.608Z,1478899356.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:36.846Z,1478899356.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:37.266Z,1478899357.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:37.405Z,1478899357.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:37.638Z,1478899357.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:37.816Z,1478899357.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:38.037Z,1478899358.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:38.441Z,1478899358.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:38.612Z,1478899358.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:38.842Z,1478899358.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:39.242Z,1478899359.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:39.409Z,1478899359.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:39.645Z,1478899359.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:39.820Z,1478899359.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:40.013Z,1478899360.013 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2016-11-11T21:22:40.045Z,1478899360.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:40.414Z,1478899360.414 [PNI_TCM](ERROR): CRC does not match. Expected:0x63139 got:0x49579
2016-11-11T21:22:40.449Z,1478899360.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:40.616Z,1478899360.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:40.820Z,1478899360.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:41.241Z,1478899361.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:41.412Z,1478899361.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:41.648Z,1478899361.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:41.820Z,1478899361.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:42.047Z,1478899362.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:42.442Z,1478899362.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:42.616Z,1478899362.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:42.849Z,1478899362.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:43.212Z,1478899363.212 [PNI_TCM](ERROR): CRC does not match. Expected:0x61360 got:0x1857
2016-11-11T21:22:43.235Z,1478899363.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:43.412Z,1478899363.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:43.629Z,1478899363.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:43.900Z,1478899363.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:44.037Z,1478899364.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:44.426Z,1478899364.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:44.696Z,1478899364.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:44.833Z,1478899364.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:45.261Z,1478899365.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:45.493Z,1478899365.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:45.633Z,1478899365.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:46.053Z,1478899366.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:46.240Z,1478899366.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:46.436Z,1478899366.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:46.838Z,1478899366.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:47.036Z,1478899367.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:47.271Z,1478899367.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:47.630Z,1478899367.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:47.833Z,1478899367.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:48.007Z,1478899368.007 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2016-11-11T21:22:48.061Z,1478899368.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:48.244Z,1478899368.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:48.481Z,1478899368.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:48.841Z,1478899368.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:49.040Z,1478899369.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:49.242Z,1478899369.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:49.615Z,1478899369.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:49.768Z,1478899369.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:50.018Z,1478899370.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:50.421Z,1478899370.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:50.564Z,1478899370.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:50.823Z,1478899370.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:51.230Z,1478899371.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:51.361Z,1478899371.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:51.629Z,1478899371.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:51.772Z,1478899371.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:52.025Z,1478899372.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:52.430Z,1478899372.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:52.568Z,1478899372.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:52.825Z,1478899372.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:53.233Z,1478899373.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:53.365Z,1478899373.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:53.690Z,1478899373.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:53.776Z,1478899373.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:54.037Z,1478899374.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:54.428Z,1478899374.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:54.572Z,1478899374.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:54.830Z,1478899374.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:55.218Z,1478899375.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:55.369Z,1478899375.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:55.636Z,1478899375.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:55.784Z,1478899375.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:56.019Z,1478899376.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:56.422Z,1478899376.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:56.582Z,1478899376.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:56.816Z,1478899376.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:57.222Z,1478899377.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:57.376Z,1478899377.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:57.636Z,1478899377.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:57.868Z,1478899377.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:58.029Z,1478899378.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:58.418Z,1478899378.418 [BPC1](ERROR): Failed to parse message.
2016-11-11T21:22:58.418Z,1478899378.418 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T21:22:58.418Z,1478899378.418 [BPC1] Data Fault, FailCount= 1
2016-11-11T21:22:58.418Z,1478899378.418 [BPC1](ERROR): Data Fault
2016-11-11T21:22:58.426Z,1478899378.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:58.460Z,1478899378.460 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T21:22:58.664Z,1478899378.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:58.835Z,1478899378.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:59.226Z,1478899379.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:59.460Z,1478899379.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:22:59.632Z,1478899379.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:22:59.653Z,1478899379.653 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:22:59.653Z,1478899379.653 [BPC1] No Fault, FailCount= 1
2016-11-11T21:23:00.081Z,1478899380.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:00.224Z,1478899380.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:00.453Z,1478899380.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:00.832Z,1478899380.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:01.020Z,1478899381.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:01.233Z,1478899381.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:01.632Z,1478899381.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:01.817Z,1478899381.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:02.040Z,1478899382.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:02.228Z,1478899382.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:02.433Z,1478899382.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:02.832Z,1478899382.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:03.024Z,1478899383.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:03.232Z,1478899383.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:03.633Z,1478899383.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:03.748Z,1478899383.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:04.032Z,1478899384.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:04.440Z,1478899384.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:04.544Z,1478899384.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:04.845Z,1478899384.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:05.222Z,1478899385.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:05.343Z,1478899385.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:05.626Z,1478899385.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:05.760Z,1478899385.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:06.029Z,1478899386.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:06.429Z,1478899386.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:06.556Z,1478899386.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:06.833Z,1478899386.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:07.229Z,1478899387.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:07.353Z,1478899387.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:07.637Z,1478899387.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:07.764Z,1478899387.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:08.017Z,1478899388.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:08.424Z,1478899388.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:08.560Z,1478899388.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:08.818Z,1478899388.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:09.225Z,1478899389.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:09.357Z,1478899389.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:09.629Z,1478899389.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:09.768Z,1478899389.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:10.030Z,1478899390.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:10.426Z,1478899390.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:10.564Z,1478899390.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:10.829Z,1478899390.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:11.277Z,1478899391.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:11.360Z,1478899391.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:11.628Z,1478899391.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:11.840Z,1478899391.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:12.049Z,1478899392.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:12.421Z,1478899392.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:12.636Z,1478899392.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:12.842Z,1478899392.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:13.213Z,1478899393.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:13.432Z,1478899393.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:13.653Z,1478899393.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:14.029Z,1478899394.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:14.200Z,1478899394.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:14.428Z,1478899394.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:14.829Z,1478899394.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:14.998Z,1478899394.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:15.241Z,1478899395.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:15.622Z,1478899395.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:15.793Z,1478899395.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:16.025Z,1478899396.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:16.204Z,1478899396.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:16.432Z,1478899396.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:16.822Z,1478899396.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:16.000Z,1478899397.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:17.220Z,1478899397.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:17.620Z,1478899397.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:17.728Z,1478899397.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:18.027Z,1478899398.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:18.421Z,1478899398.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:18.524Z,1478899398.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:18.825Z,1478899398.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:19.222Z,1478899399.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:19.321Z,1478899399.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:19.633Z,1478899399.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:19.736Z,1478899399.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:20.032Z,1478899400.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:20.429Z,1478899400.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:20.532Z,1478899400.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:20.837Z,1478899400.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:21.244Z,1478899401.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:21.329Z,1478899401.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:21.629Z,1478899401.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:21.744Z,1478899401.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:22.022Z,1478899402.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:22.540Z,1478899402.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:23.337Z,1478899403.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:23.748Z,1478899403.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:24.544Z,1478899404.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:25.340Z,1478899405.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:25.653Z,1478899405.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:25.765Z,1478899405.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:25.824Z,1478899405.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:26.170Z,1478899406.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:26.553Z,1478899406.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:26.620Z,1478899406.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:26.977Z,1478899406.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:27.374Z,1478899407.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:27.416Z,1478899407.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:27.840Z,1478899407.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:28.147Z,1478899408.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:28.176Z,1478899408.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:28.546Z,1478899408.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:28.957Z,1478899408.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:28.972Z,1478899408.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:29.350Z,1478899409.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:29.769Z,1478899409.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:29.807Z,1478899409.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:30.169Z,1478899410.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:30.184Z,1478899410.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:30.557Z,1478899410.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:30.943Z,1478899410.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:30.980Z,1478899410.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:31.393Z,1478899411.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:31.720Z,1478899411.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:31.753Z,1478899411.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:32.155Z,1478899412.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:32.561Z,1478899412.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:32.953Z,1478899412.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:33.382Z,1478899413.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:33.766Z,1478899413.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:34.149Z,1478899414.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:34.548Z,1478899414.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:34.951Z,1478899414.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:35.362Z,1478899415.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:35.756Z,1478899415.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:36.161Z,1478899416.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:36.555Z,1478899416.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:36.957Z,1478899416.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:37.398Z,1478899417.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:37.761Z,1478899417.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:38.225Z,1478899418.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:38.525Z,1478899418.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:38.573Z,1478899418.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:38.973Z,1478899418.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:39.320Z,1478899419.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:39.353Z,1478899419.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:39.794Z,1478899419.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:39.804Z,1478899419.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:40.150Z,1478899420.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:40.574Z,1478899420.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:40.600Z,1478899420.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:40.967Z,1478899420.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:41.360Z,1478899421.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:41.396Z,1478899421.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:41.820Z,1478899421.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:42.165Z,1478899422.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:42.196Z,1478899422.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:42.545Z,1478899422.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:42.944Z,1478899422.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:42.992Z,1478899422.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:43.349Z,1478899423.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:43.788Z,1478899423.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:43.826Z,1478899423.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:44.150Z,1478899424.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:44.196Z,1478899424.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:44.564Z,1478899424.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:44.959Z,1478899424.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:44.992Z,1478899424.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:45.359Z,1478899425.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:45.688Z,1478899425.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:45.710Z,1478899425.710 [NAL9602](INFO): SBD MO Status=0, MOMSN=359, MT Status=0, MTMSN=0
2016-11-11T21:23:45.710Z,1478899425.710 [NAL9602](INFO): No messages in MT queue
2016-11-11T21:23:45.767Z,1478899425.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:46.156Z,1478899426.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:46.565Z,1478899426.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:46.968Z,1478899426.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:47.386Z,1478899427.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:47.749Z,1478899427.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:48.149Z,1478899428.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:48.553Z,1478899428.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:48.962Z,1478899428.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:49.386Z,1478899429.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:49.765Z,1478899429.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:50.161Z,1478899430.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:50.567Z,1478899430.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:50.957Z,1478899430.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:51.379Z,1478899431.379 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T21:23:51.379Z,1478899431.379 [BPC1] Data Fault, FailCount= 1
2016-11-11T21:23:51.379Z,1478899431.379 [BPC1](ERROR): Data Fault
2016-11-11T21:23:51.409Z,1478899431.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:51.454Z,1478899431.454 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T21:23:51.766Z,1478899431.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:52.163Z,1478899432.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:52.515Z,1478899432.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:52.569Z,1478899432.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:52.610Z,1478899432.610 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:23:52.610Z,1478899432.610 [BPC1] No Fault, FailCount= 1
2016-11-11T21:23:53.029Z,1478899433.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:53.308Z,1478899433.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:53.442Z,1478899433.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:53.757Z,1478899433.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:53.800Z,1478899433.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:54.149Z,1478899434.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:54.552Z,1478899434.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:54.596Z,1478899434.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:54.957Z,1478899434.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:55.359Z,1478899435.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:55.392Z,1478899435.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:55.804Z,1478899435.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:23:56.117Z,1478899436.117 [NAL9602](INFO): GPS fix at 20161111T212329: (36.802665, -121.787937)
2016-11-11T21:23:56.144Z,1478899436.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:56.198Z,1478899436.198 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T21:23:56.198Z,1478899436.198 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T21:23:56.940Z,1478899436.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:57.737Z,1478899437.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:58.148Z,1478899438.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:58.944Z,1478899438.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:23:59.741Z,1478899439.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:00.152Z,1478899440.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:00.948Z,1478899440.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:01.274Z,1478899441.274 [DataOverHttps](INFO): Sending 81 bytes from file Logs/20161111T044527/Courier0384.lzma
2016-11-11T21:24:01.665Z,1478899441.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:02.046Z,1478899442.046 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0384.lzma.bak
2016-11-11T21:24:02.046Z,1478899442.046 [DataOverHttps](INFO): SBD MOMSN=4555775
2016-11-11T21:24:02.460Z,1478899442.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:03.257Z,1478899443.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:03.676Z,1478899443.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:04.472Z,1478899444.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:05.269Z,1478899445.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:05.680Z,1478899445.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:06.476Z,1478899446.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:06.991Z,1478899446.991 [NAL9602](INFO): Powering down
2016-11-11T21:24:07.272Z,1478899447.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:07.740Z,1478899447.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:08.536Z,1478899448.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:09.332Z,1478899449.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:10.104Z,1478899450.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:10.900Z,1478899450.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:11.697Z,1478899451.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:12.108Z,1478899452.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:12.336Z,1478899452.336 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0385.lzma
2016-11-11T21:24:12.904Z,1478899452.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:13.122Z,1478899453.122 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0385.lzma.bak
2016-11-11T21:24:13.122Z,1478899453.122 [DataOverHttps](INFO): SBD MOMSN=4555778
2016-11-11T21:24:13.636Z,1478899453.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:14.432Z,1478899454.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:14.660Z,1478899454.660 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T21:24:14.660Z,1478899454.660 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T21:24:14.660Z,1478899454.660 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T21:24:15.230Z,1478899455.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:15.652Z,1478899455.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:16.448Z,1478899456.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:17.244Z,1478899457.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:17.688Z,1478899457.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:18.484Z,1478899458.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:19.280Z,1478899459.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:19.688Z,1478899459.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:20.484Z,1478899460.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:21.281Z,1478899461.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:21.716Z,1478899461.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:22.512Z,1478899462.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:23.309Z,1478899463.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:24.096Z,1478899464.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:24.892Z,1478899464.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:25.689Z,1478899465.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:26.100Z,1478899466.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:26.896Z,1478899466.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:27.617Z,1478899467.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:28.414Z,1478899468.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:29.208Z,1478899469.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:29.620Z,1478899469.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:30.416Z,1478899470.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:31.214Z,1478899471.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:31.624Z,1478899471.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:32.420Z,1478899472.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:33.217Z,1478899473.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:33.624Z,1478899473.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:34.421Z,1478899474.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:35.217Z,1478899475.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:35.712Z,1478899475.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:36.508Z,1478899476.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:37.304Z,1478899477.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:38.076Z,1478899478.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:38.872Z,1478899478.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:39.673Z,1478899479.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:40.092Z,1478899480.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:40.888Z,1478899480.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:41.684Z,1478899481.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:42.480Z,1478899482.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:43.276Z,1478899483.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:44.072Z,1478899484.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:44.868Z,1478899484.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:45.664Z,1478899485.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:46.460Z,1478899486.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:47.256Z,1478899487.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:48.052Z,1478899488.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:48.849Z,1478899488.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:49.644Z,1478899489.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:50.440Z,1478899490.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:51.236Z,1478899491.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:52.032Z,1478899492.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:52.828Z,1478899492.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:53.624Z,1478899493.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:54.420Z,1478899494.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:55.218Z,1478899495.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:56.014Z,1478899496.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:56.810Z,1478899496.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:57.604Z,1478899497.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:58.400Z,1478899498.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:24:59.196Z,1478899499.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:00.003Z,1478899500.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:00.448Z,1478899500.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:00.856Z,1478899500.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:01.264Z,1478899501.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:01.672Z,1478899501.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:02.080Z,1478899502.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:02.488Z,1478899502.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:02.896Z,1478899502.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:03.304Z,1478899503.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:03.712Z,1478899503.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:04.120Z,1478899504.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:04.528Z,1478899504.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:04.936Z,1478899504.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:05.732Z,1478899505.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:06.140Z,1478899506.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:06.937Z,1478899506.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:07.732Z,1478899507.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:08.144Z,1478899508.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:08.940Z,1478899508.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:09.556Z,1478899509.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:10.352Z,1478899510.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:11.149Z,1478899511.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:11.560Z,1478899511.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:12.356Z,1478899512.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:13.153Z,1478899513.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:13.564Z,1478899513.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:14.360Z,1478899514.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:15.156Z,1478899515.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:15.564Z,1478899515.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:16.360Z,1478899516.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:17.156Z,1478899517.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:17.628Z,1478899517.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:18.424Z,1478899518.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:19.220Z,1478899519.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:19.988Z,1478899519.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:20.784Z,1478899520.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:21.581Z,1478899521.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:21.996Z,1478899521.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:22.792Z,1478899522.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:23.512Z,1478899523.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:24.308Z,1478899524.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:25.105Z,1478899525.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:25.516Z,1478899525.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:26.312Z,1478899526.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:27.109Z,1478899527.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:27.520Z,1478899527.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:28.316Z,1478899528.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:29.113Z,1478899529.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:29.524Z,1478899529.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:30.321Z,1478899530.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:31.116Z,1478899531.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:31.620Z,1478899531.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:32.161Z,1478899532.161 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:25:32.162Z,1478899532.161 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2016-11-11T21:25:32.162Z,1478899532.162 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:25:32.191Z,1478899532.191 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:25:32.416Z,1478899532.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:32.566Z,1478899532.566 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:25:32.567Z,1478899532.566 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2016-11-11T21:25:32.993Z,1478899532.993 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:25:32.993Z,1478899532.993 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:25:32.993Z,1478899532.993 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:25:33.212Z,1478899533.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:33.964Z,1478899533.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:34.760Z,1478899534.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:35.557Z,1478899535.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:35.968Z,1478899535.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:36.764Z,1478899536.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:37.496Z,1478899537.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:38.294Z,1478899538.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:39.089Z,1478899539.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:39.500Z,1478899539.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:40.296Z,1478899540.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:41.093Z,1478899541.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:41.504Z,1478899541.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:42.300Z,1478899542.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:43.097Z,1478899543.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:43.508Z,1478899543.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:43.714Z,1478899543.714 [PNI_TCM](ERROR): CRC does not match. Expected:0x10653 got:0x7361
2016-11-11T21:25:44.304Z,1478899544.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:45.100Z,1478899545.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:45.317Z,1478899545.317 [PNI_TCM](ERROR): CRC does not match. Expected:0x54703 got:0x41223
2016-11-11T21:25:45.589Z,1478899545.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:46.384Z,1478899546.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:47.180Z,1478899547.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:47.944Z,1478899547.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:48.740Z,1478899548.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:49.537Z,1478899549.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:49.948Z,1478899549.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:50.113Z,1478899550.113 [PNI_TCM](ERROR): CRC does not match. Expected:0x58979 got:0x48987
2016-11-11T21:25:50.744Z,1478899550.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:51.484Z,1478899551.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:52.280Z,1478899552.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:53.077Z,1478899553.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:53.323Z,1478899553.323 [PNI_TCM](ERROR): CRC does not match. Expected:0x30230 got:0x1857
2016-11-11T21:25:53.492Z,1478899553.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:54.288Z,1478899554.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:55.085Z,1478899555.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:55.496Z,1478899555.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:56.292Z,1478899556.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:57.089Z,1478899557.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:57.496Z,1478899557.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:58.292Z,1478899558.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:59.090Z,1478899559.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:25:59.568Z,1478899559.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:00.364Z,1478899560.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:01.162Z,1478899561.162 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:01.924Z,1478899561.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:02.720Z,1478899562.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:03.517Z,1478899563.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:03.932Z,1478899563.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:04.728Z,1478899564.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:05.448Z,1478899565.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:06.244Z,1478899566.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:07.041Z,1478899567.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:07.452Z,1478899567.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:08.249Z,1478899568.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:09.045Z,1478899569.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:09.456Z,1478899569.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:10.252Z,1478899570.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:11.049Z,1478899571.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:11.460Z,1478899571.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:12.256Z,1478899572.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:13.052Z,1478899573.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:13.552Z,1478899573.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:14.348Z,1478899574.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:15.144Z,1478899575.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:15.900Z,1478899575.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:16.696Z,1478899576.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:17.493Z,1478899577.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:17.908Z,1478899577.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:18.704Z,1478899578.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:18.772Z,1478899578.772 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T21:26:19.428Z,1478899579.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:20.224Z,1478899580.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:21.021Z,1478899581.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:21.432Z,1478899581.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:22.228Z,1478899582.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:23.025Z,1478899583.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:23.444Z,1478899583.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:24.240Z,1478899584.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:25.037Z,1478899585.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:25.444Z,1478899585.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:26.240Z,1478899586.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:27.036Z,1478899587.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:27.512Z,1478899587.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:28.308Z,1478899588.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:29.104Z,1478899589.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:29.872Z,1478899589.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:30.669Z,1478899590.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:31.465Z,1478899591.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:31.888Z,1478899591.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:32.684Z,1478899592.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:33.396Z,1478899593.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:34.193Z,1478899594.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:34.989Z,1478899594.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:35.404Z,1478899595.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:36.200Z,1478899596.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:37.007Z,1478899597.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:37.428Z,1478899597.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:38.224Z,1478899598.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:39.020Z,1478899599.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:39.428Z,1478899599.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:40.224Z,1478899600.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:41.020Z,1478899601.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:41.496Z,1478899601.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:42.294Z,1478899602.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:43.088Z,1478899603.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:43.856Z,1478899603.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:44.652Z,1478899604.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:45.449Z,1478899605.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:45.860Z,1478899605.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:46.656Z,1478899606.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:47.452Z,1478899607.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:47.860Z,1478899607.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:48.656Z,1478899608.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:49.368Z,1478899609.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:50.164Z,1478899610.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:50.963Z,1478899610.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:51.380Z,1478899611.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:52.176Z,1478899612.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:52.451Z,1478899612.451 [PNI_TCM](ERROR): CRC does not match. Expected:0x13372 got:0x7490
2016-11-11T21:26:52.972Z,1478899612.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:53.384Z,1478899613.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:54.180Z,1478899614.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:54.976Z,1478899614.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:55.480Z,1478899615.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:55.612Z,1478899615.612 [PNI_TCM](ERROR): CRC does not match. Expected:0x26108 got:0x60288
2016-11-11T21:26:56.276Z,1478899616.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:57.072Z,1478899617.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:57.820Z,1478899617.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:58.616Z,1478899618.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:59.413Z,1478899619.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:26:59.824Z,1478899619.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:00.620Z,1478899620.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:01.352Z,1478899621.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:02.148Z,1478899622.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:02.945Z,1478899622.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:03.356Z,1478899623.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:04.152Z,1478899624.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:04.957Z,1478899624.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:05.376Z,1478899625.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:06.172Z,1478899626.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:06.968Z,1478899626.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:07.376Z,1478899627.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:08.172Z,1478899628.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:08.968Z,1478899628.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:09.456Z,1478899629.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:10.252Z,1478899630.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:11.048Z,1478899631.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:11.804Z,1478899631.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:12.600Z,1478899632.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:13.402Z,1478899633.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:13.832Z,1478899633.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:14.628Z,1478899634.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:15.328Z,1478899635.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:16.124Z,1478899636.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:16.921Z,1478899636.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:17.332Z,1478899637.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:18.128Z,1478899638.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:18.925Z,1478899638.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:19.336Z,1478899639.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:20.132Z,1478899640.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:20.929Z,1478899640.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:21.340Z,1478899641.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:22.136Z,1478899642.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:22.933Z,1478899642.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:23.420Z,1478899643.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:24.216Z,1478899644.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:25.012Z,1478899645.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:25.130Z,1478899645.130 [BPC1](ERROR): Failed to receive battery data
2016-11-11T21:27:25.130Z,1478899645.130 [BPC1] Communications Fault, FailCount= 1
2016-11-11T21:27:25.130Z,1478899645.130 [BPC1](ERROR): Communications Fault
2016-11-11T21:27:25.235Z,1478899645.236 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T21:27:25.796Z,1478899645.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:26.137Z,1478899646.137 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:27:26.137Z,1478899646.137 [BPC1] No Fault, FailCount= 1
2016-11-11T21:27:26.592Z,1478899646.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:27.389Z,1478899647.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:27.800Z,1478899647.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:28.596Z,1478899648.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:29.308Z,1478899649.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:30.104Z,1478899650.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:30.910Z,1478899650.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:31.332Z,1478899651.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:32.128Z,1478899652.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:32.925Z,1478899652.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:33.336Z,1478899653.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:34.132Z,1478899654.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:34.928Z,1478899654.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:35.356Z,1478899655.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:36.152Z,1478899656.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:36.948Z,1478899656.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:37.412Z,1478899657.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:38.208Z,1478899658.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:39.004Z,1478899659.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:39.788Z,1478899659.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:40.584Z,1478899660.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:41.380Z,1478899661.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:41.788Z,1478899661.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:42.584Z,1478899662.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:43.356Z,1478899663.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:44.152Z,1478899664.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:44.948Z,1478899664.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:45.356Z,1478899665.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:46.152Z,1478899666.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:46.948Z,1478899666.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:47.356Z,1478899667.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:48.152Z,1478899668.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:48.948Z,1478899668.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:49.356Z,1478899669.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:50.152Z,1478899670.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:50.949Z,1478899670.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:51.376Z,1478899671.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:52.172Z,1478899672.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:52.968Z,1478899672.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:53.760Z,1478899673.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:54.556Z,1478899674.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:55.352Z,1478899675.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:55.764Z,1478899675.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:56.560Z,1478899676.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:57.336Z,1478899677.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:58.132Z,1478899678.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:58.936Z,1478899678.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:27:59.344Z,1478899679.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:00.140Z,1478899680.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:00.936Z,1478899680.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:01.344Z,1478899681.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:02.140Z,1478899682.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:02.936Z,1478899682.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:03.344Z,1478899683.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:04.140Z,1478899684.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:04.937Z,1478899684.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:05.372Z,1478899685.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:06.168Z,1478899686.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:06.964Z,1478899686.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:07.740Z,1478899687.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:08.536Z,1478899688.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:09.332Z,1478899689.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:09.744Z,1478899689.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:10.540Z,1478899690.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:11.253Z,1478899691.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:12.048Z,1478899692.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:12.845Z,1478899692.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:13.258Z,1478899693.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:14.054Z,1478899694.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:14.848Z,1478899694.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:15.260Z,1478899695.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:16.056Z,1478899696.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:16.853Z,1478899696.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:17.264Z,1478899697.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:18.060Z,1478899698.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:18.856Z,1478899698.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:19.336Z,1478899699.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:20.132Z,1478899700.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:20.928Z,1478899700.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:21.696Z,1478899701.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:22.492Z,1478899702.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:23.289Z,1478899703.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:23.700Z,1478899703.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:24.496Z,1478899704.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:25.220Z,1478899705.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:26.016Z,1478899706.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:26.813Z,1478899706.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:27.248Z,1478899707.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:28.044Z,1478899708.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:28.841Z,1478899708.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:29.254Z,1478899709.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:30.048Z,1478899710.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:30.844Z,1478899710.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:31.252Z,1478899711.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:32.048Z,1478899712.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:32.844Z,1478899712.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:33.029Z,1478899713.029 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:28:33.029Z,1478899713.029 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2016-11-11T21:28:33.029Z,1478899713.029 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:28:33.067Z,1478899713.067 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:28:33.316Z,1478899713.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:33.432Z,1478899713.432 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:28:33.432Z,1478899713.432 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2016-11-11T21:28:33.794Z,1478899713.794 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:28:33.794Z,1478899713.795 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:28:33.803Z,1478899713.803 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:28:34.112Z,1478899714.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:34.908Z,1478899714.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:35.676Z,1478899715.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:36.472Z,1478899716.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:37.269Z,1478899717.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:37.680Z,1478899717.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:38.476Z,1478899718.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:39.200Z,1478899719.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:39.996Z,1478899719.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:40.793Z,1478899720.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:41.204Z,1478899721.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:41.000Z,1478899722.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:42.797Z,1478899722.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:43.208Z,1478899723.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:44.004Z,1478899724.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:44.801Z,1478899724.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:45.212Z,1478899725.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:46.008Z,1478899726.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:46.804Z,1478899726.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:47.312Z,1478899727.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:48.108Z,1478899728.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:48.907Z,1478899728.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:49.668Z,1478899729.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:50.464Z,1478899730.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:51.261Z,1478899731.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:51.672Z,1478899731.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:52.468Z,1478899732.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:53.180Z,1478899733.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:53.976Z,1478899733.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:54.773Z,1478899734.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:55.184Z,1478899735.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:55.980Z,1478899735.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:56.777Z,1478899736.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:57.188Z,1478899737.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:57.984Z,1478899737.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:58.781Z,1478899738.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:59.200Z,1478899739.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:28:59.996Z,1478899739.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:00.792Z,1478899740.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:01.288Z,1478899741.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:02.084Z,1478899742.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:02.880Z,1478899742.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:03.632Z,1478899743.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:04.428Z,1478899744.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:05.225Z,1478899745.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:05.636Z,1478899745.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:06.432Z,1478899746.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:07.160Z,1478899747.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:07.956Z,1478899747.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:08.753Z,1478899748.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:09.164Z,1478899749.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:09.960Z,1478899749.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:10.760Z,1478899750.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:11.180Z,1478899751.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:11.777Z,1478899751.777 [PNI_TCM](ERROR): CRC does not match. Expected:0x52609 got:0x23582
2016-11-11T21:29:11.976Z,1478899751.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:12.772Z,1478899752.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:13.184Z,1478899753.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:13.982Z,1478899753.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:14.776Z,1478899754.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:15.015Z,1478899755.016 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T21:29:15.016Z,1478899755.016 [Default:CheckIn:C.Wait] Stopped
2016-11-11T21:29:15.016Z,1478899755.016 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T21:29:15.016Z,1478899755.016 [Default:CheckIn:D] Running Loop=1
2016-11-11T21:29:15.252Z,1478899755.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:15.407Z,1478899755.407 [Default:CheckIn:D] Stopped
2016-11-11T21:29:15.407Z,1478899755.407 [Default:CheckIn:E] Running Loop=1
2016-11-11T21:29:15.835Z,1478899755.835 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 999.234961 min 
2016-11-11T21:29:15.836Z,1478899755.836 [Default:CheckIn:E] Stopped
2016-11-11T21:29:15.836Z,1478899755.836 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T21:29:15.836Z,1478899755.836 [Default:CheckIn] Stopped
2016-11-11T21:29:15.836Z,1478899755.836 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T21:29:15.836Z,1478899755.836 [Default:CheckIn](INFO): Running loop #97
2016-11-11T21:29:15.836Z,1478899755.836 [Default:CheckIn] Running Loop=97
2016-11-11T21:29:15.836Z,1478899755.836 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T21:29:15.836Z,1478899755.836 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T21:29:16.048Z,1478899756.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:16.844Z,1478899756.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:17.624Z,1478899757.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:18.420Z,1478899758.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:19.140Z,1478899759.140 [PNI_TCM](ERROR): CRC does not match. Expected:0x16898 got:0x1857
2016-11-11T21:29:19.141Z,1478899759.141 [PNI_TCM](ERROR): CRC does not match. Expected:0x3921 got:0x1857
2016-11-11T21:29:19.141Z,1478899759.141 [PNI_TCM](ERROR): CRC does not match. Expected:0x53129 got:0x1857
2016-11-11T21:29:19.141Z,1478899759.141 [PNI_TCM](ERROR): CRC does not match. Expected:0x43860 got:0x1857
2016-11-11T21:29:19.142Z,1478899759.142 [PNI_TCM](ERROR): CRC does not match. Expected:0x6049 got:0x1857
2016-11-11T21:29:19.142Z,1478899759.142 [PNI_TCM](ERROR): CRC does not match. Expected:0x29041 got:0x1857
2016-11-11T21:29:19.143Z,1478899759.143 [PNI_TCM](ERROR): CRC does not match. Expected:0x4766 got:0x1857
2016-11-11T21:29:19.143Z,1478899759.143 [PNI_TCM](ERROR): CRC does not match. Expected:0x55096 got:0x1857
2016-11-11T21:29:19.218Z,1478899759.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:19.352Z,1478899759.352 [NAL9602](INFO): Powering up
2016-11-11T21:29:19.642Z,1478899759.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:20.436Z,1478899760.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:20.977Z,1478899760.977 [PNI_TCM](ERROR): CRC does not match. Expected:0x11805 got:0x18884
2016-11-11T21:29:21.144Z,1478899761.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:21.940Z,1478899761.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:22.573Z,1478899762.573 [PNI_TCM](ERROR): CRC does not match. Expected:0x22017 got:0x43889
2016-11-11T21:29:22.737Z,1478899762.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:23.160Z,1478899763.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:23.956Z,1478899763.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:24.188Z,1478899764.188 [PNI_TCM](ERROR): CRC does not match. Expected:0x21602 got:0x60224
2016-11-11T21:29:24.753Z,1478899764.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:25.164Z,1478899765.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:25.960Z,1478899765.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:26.756Z,1478899766.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:27.164Z,1478899767.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:27.962Z,1478899767.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:28.756Z,1478899768.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:29.232Z,1478899769.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:30.028Z,1478899770.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:30.553Z,1478899770.553 [NAL9602](INFO): NAL9602 initialized
2016-11-11T21:29:30.824Z,1478899770.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:31.588Z,1478899771.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:32.384Z,1478899772.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:33.181Z,1478899773.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:33.592Z,1478899773.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:34.388Z,1478899774.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:35.116Z,1478899775.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:35.912Z,1478899775.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:36.709Z,1478899776.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:37.120Z,1478899777.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:37.918Z,1478899777.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:38.713Z,1478899778.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:39.124Z,1478899779.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:39.920Z,1478899779.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:40.717Z,1478899780.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:41.128Z,1478899781.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:41.924Z,1478899781.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:42.720Z,1478899782.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:43.208Z,1478899783.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:44.004Z,1478899784.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:44.800Z,1478899784.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:45.568Z,1478899785.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:46.364Z,1478899786.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:47.161Z,1478899787.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:47.572Z,1478899787.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:48.368Z,1478899788.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:49.104Z,1478899789.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:49.900Z,1478899789.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:50.697Z,1478899790.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:51.200Z,1478899791.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:51.996Z,1478899791.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:52.792Z,1478899792.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:53.200Z,1478899793.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:53.996Z,1478899793.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:54.792Z,1478899794.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:55.200Z,1478899795.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:55.996Z,1478899795.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:56.801Z,1478899796.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:57.224Z,1478899797.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:58.020Z,1478899798.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:58.816Z,1478899798.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:29:59.548Z,1478899799.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:00.344Z,1478899800.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:01.141Z,1478899801.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:01.552Z,1478899801.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:02.348Z,1478899802.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:03.096Z,1478899803.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:03.892Z,1478899803.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:04.688Z,1478899804.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:05.100Z,1478899805.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:05.896Z,1478899805.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:06.692Z,1478899806.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:07.104Z,1478899807.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:07.900Z,1478899807.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:08.696Z,1478899808.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:09.104Z,1478899809.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:09.900Z,1478899809.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:10.696Z,1478899810.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:11.188Z,1478899811.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:11.984Z,1478899811.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:12.780Z,1478899812.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:13.524Z,1478899813.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:14.320Z,1478899814.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:15.117Z,1478899815.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:15.528Z,1478899815.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:16.324Z,1478899816.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:17.056Z,1478899817.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:17.852Z,1478899817.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:18.649Z,1478899818.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:19.068Z,1478899819.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:19.864Z,1478899819.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:20.661Z,1478899820.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:21.072Z,1478899821.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:21.869Z,1478899821.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:22.664Z,1478899822.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:23.076Z,1478899823.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:23.874Z,1478899823.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:24.669Z,1478899824.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:25.148Z,1478899825.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:25.944Z,1478899825.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:26.740Z,1478899826.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:27.520Z,1478899827.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:28.316Z,1478899828.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:29.112Z,1478899829.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:29.544Z,1478899829.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:30.340Z,1478899830.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:31.044Z,1478899831.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:31.840Z,1478899831.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:32.637Z,1478899832.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:33.048Z,1478899833.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:33.846Z,1478899833.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:34.640Z,1478899834.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:35.052Z,1478899835.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:35.848Z,1478899835.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:36.644Z,1478899836.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:37.056Z,1478899837.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:37.852Z,1478899837.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:38.648Z,1478899838.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:39.124Z,1478899839.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:39.920Z,1478899839.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:40.716Z,1478899840.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:41.512Z,1478899841.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:41.920Z,1478899841.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:42.716Z,1478899842.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:43.488Z,1478899843.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:44.284Z,1478899844.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:45.012Z,1478899845.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:45.808Z,1478899845.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:46.605Z,1478899846.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:47.016Z,1478899847.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:47.812Z,1478899847.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:48.619Z,1478899848.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:49.056Z,1478899849.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:49.854Z,1478899849.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:50.648Z,1478899850.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:51.100Z,1478899851.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:51.896Z,1478899851.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:52.692Z,1478899852.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:53.136Z,1478899853.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:53.932Z,1478899853.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:54.728Z,1478899854.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:55.500Z,1478899855.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:56.296Z,1478899856.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:57.092Z,1478899857.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:57.500Z,1478899857.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:58.296Z,1478899858.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:58.988Z,1478899858.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:30:59.784Z,1478899859.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:00.581Z,1478899860.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:00.992Z,1478899860.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:07.132Z,1478899867.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:07.928Z,1478899867.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:08.724Z,1478899868.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:09.443Z,1478899869.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:10.240Z,1478899870.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:11.037Z,1478899871.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:11.448Z,1478899871.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:21.068Z,1478899881.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:21.864Z,1478899881.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:22.661Z,1478899882.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:23.408Z,1478899883.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:24.204Z,1478899884.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:25.001Z,1478899885.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:25.412Z,1478899885.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:34.068Z,1478899894.069 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:31:34.069Z,1478899894.069 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2016-11-11T21:31:34.069Z,1478899894.069 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:31:34.083Z,1478899894.083 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:31:34.558Z,1478899894.558 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:31:34.558Z,1478899894.559 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2016-11-11T21:31:34.903Z,1478899894.903 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:31:34.904Z,1478899894.904 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:31:34.904Z,1478899894.904 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:31:35.832Z,1478899895.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:36.628Z,1478899896.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:37.388Z,1478899897.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:38.184Z,1478899898.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:38.981Z,1478899898.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:31:39.392Z,1478899899.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:32:31.736Z,1478899951.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:32:32.532Z,1478899952.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:32:36.721Z,1478899956.721 [BPC1](ERROR): Failed to receive battery data
2016-11-11T21:32:36.721Z,1478899956.721 [BPC1] Communications Fault, FailCount= 1
2016-11-11T21:32:36.721Z,1478899956.721 [BPC1](ERROR): Communications Fault
2016-11-11T21:32:36.798Z,1478899956.798 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T21:32:37.943Z,1478899957.943 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:32:37.943Z,1478899957.944 [BPC1] No Fault, FailCount= 1
2016-11-11T21:33:14.314Z,1478899994.314 [BPC1](ERROR): Failed to parse message.
2016-11-11T21:33:14.314Z,1478899994.314 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T21:33:14.314Z,1478899994.314 [BPC1] Data Fault, FailCount= 1
2016-11-11T21:33:14.314Z,1478899994.314 [BPC1](ERROR): Data Fault
2016-11-11T21:33:14.388Z,1478899994.388 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T21:33:15.550Z,1478899995.550 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:33:15.550Z,1478899995.550 [BPC1] No Fault, FailCount= 1
2016-11-11T21:33:59.558Z,1478900039.558 [NAL9602](INFO): SBD MO Status=0, MOMSN=360, MT Status=0, MTMSN=0
2016-11-11T21:33:59.558Z,1478900039.558 [NAL9602](INFO): No messages in MT queue
2016-11-11T21:33:59.558Z,1478900039.558 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2016-11-11T21:34:00.765Z,1478900040.765 [NAL9602](INFO): GPS fix at 20161111T213334: (36.802783, -121.788228)
2016-11-11T21:34:00.815Z,1478900040.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): horizontalPathLengthSinceLastFix_ = 1013.4, recording fix residuals...
2016-11-11T21:34:00.850Z,1478900040.850 [UniversalFixResidualReporter](INFO): Fix residual: 101.1 %DT, over the last 1013.4 m. Residual distance 1024.8 m at bearing 50.7 degrees. Fix at (36.8028, -121.7882) with 29.1 m made good.
2016-11-11T21:34:00.855Z,1478900040.855 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T21:34:00.855Z,1478900040.855 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T21:34:05.957Z,1478900045.957 [DataOverHttps](INFO): Sending 213 bytes from file Logs/20161111T044527/Courier0388.lzma
2016-11-11T21:34:06.758Z,1478900046.758 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0388.lzma.bak
2016-11-11T21:34:06.758Z,1478900046.758 [DataOverHttps](INFO): SBD MOMSN=4555784
2016-11-11T21:34:08.054Z,1478900048.055 [NAL9602](INFO): Powering down
2016-11-11T21:34:16.875Z,1478900056.875 [DataOverHttps](INFO): Sending 137 bytes from file Logs/20161111T044527/Express0389.lzma
2016-11-11T21:34:17.642Z,1478900057.642 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0389.lzma.bak
2016-11-11T21:34:17.642Z,1478900057.642 [DataOverHttps](INFO): SBD MOMSN=4555787
2016-11-11T21:34:19.221Z,1478900059.221 [PNI_TCM](ERROR): CRC does not match. Expected:0x2390 got:0x64835
2016-11-11T21:34:19.222Z,1478900059.222 [PNI_TCM](ERROR): CRC does not match. Expected:0x25707 got:0x64656
2016-11-11T21:34:19.222Z,1478900059.222 [PNI_TCM](ERROR): CRC does not match. Expected:0x41627 got:0x64781
2016-11-11T21:34:19.285Z,1478900059.285 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T21:34:19.285Z,1478900059.285 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T21:34:19.285Z,1478900059.285 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T21:34:35.036Z,1478900075.036 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:34:35.036Z,1478900075.036 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2016-11-11T21:34:35.036Z,1478900075.036 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:34:35.063Z,1478900075.063 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:34:35.456Z,1478900075.456 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:34:35.456Z,1478900075.456 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2016-11-11T21:34:35.823Z,1478900075.823 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:34:35.831Z,1478900075.831 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:34:35.832Z,1478900075.832 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:34:37.524Z,1478900077.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:34:38.320Z,1478900078.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:34:51.520Z,1478900091.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:34:52.316Z,1478900092.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:35:50.755Z,1478900150.755 [PNI_TCM](ERROR): CRC does not match. Expected:0x3944 got:0x64339
2016-11-11T21:35:52.345Z,1478900152.345 [PNI_TCM](ERROR): CRC does not match. Expected:0x569 got:0x60352
2016-11-11T21:35:53.944Z,1478900153.944 [PNI_TCM](ERROR): CRC does not match. Expected:0x6660 got:0x16913
2016-11-11T21:35:53.956Z,1478900153.956 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T21:35:53.956Z,1478900153.956 [BPC1] Data Fault, FailCount= 1
2016-11-11T21:35:53.956Z,1478900153.956 [BPC1](ERROR): Data Fault
2016-11-11T21:35:54.036Z,1478900154.036 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T21:35:55.179Z,1478900155.179 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:35:55.179Z,1478900155.179 [BPC1] No Fault, FailCount= 1
2016-11-11T21:35:55.537Z,1478900155.537 [PNI_TCM](ERROR): CRC does not match. Expected:0x50761 got:0x7361
2016-11-11T21:36:18.775Z,1478900178.775 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T21:36:24.287Z,1478900184.287 [PNI_TCM](ERROR): CRC does not match. Expected:0x45657 got:0x43923
2016-11-11T21:36:27.488Z,1478900187.488 [PNI_TCM](ERROR): CRC does not match. Expected:0x33275 got:0x6591
2016-11-11T21:36:29.477Z,1478900189.477 [PNI_TCM](ERROR): CRC does not match. Expected:0x49626 got:0x1857
2016-11-11T21:36:30.681Z,1478900190.681 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2016-11-11T21:36:32.290Z,1478900192.290 [PNI_TCM](ERROR): CRC does not match. Expected:0x6153 got:0x29468
2016-11-11T21:37:35.885Z,1478900255.885 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:37:35.885Z,1478900255.885 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2016-11-11T21:37:35.885Z,1478900255.885 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:37:35.966Z,1478900255.967 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:37:36.305Z,1478900256.305 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:37:36.305Z,1478900256.305 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2016-11-11T21:37:36.733Z,1478900256.733 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:37:36.734Z,1478900256.734 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:37:36.734Z,1478900256.734 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:38:37.445Z,1478900317.445 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T21:38:37.445Z,1478900317.445 [BPC1] Data Fault, FailCount= 1
2016-11-11T21:38:37.445Z,1478900317.445 [BPC1](ERROR): Data Fault
2016-11-11T21:38:37.520Z,1478900317.520 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T21:38:38.670Z,1478900318.670 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:38:38.670Z,1478900318.670 [BPC1] No Fault, FailCount= 1
2016-11-11T21:39:19.454Z,1478900359.454 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T21:39:19.455Z,1478900359.455 [Default:CheckIn:C.Wait] Stopped
2016-11-11T21:39:19.455Z,1478900359.455 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T21:39:19.455Z,1478900359.455 [Default:CheckIn:D] Running Loop=1
2016-11-11T21:39:19.859Z,1478900359.859 [Default:CheckIn:D] Stopped
2016-11-11T21:39:19.859Z,1478900359.859 [Default:CheckIn:E] Running Loop=1
2016-11-11T21:39:20.414Z,1478900360.414 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1009.309115 min 
2016-11-11T21:39:20.414Z,1478900360.414 [Default:CheckIn:E] Stopped
2016-11-11T21:39:20.415Z,1478900360.415 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T21:39:20.415Z,1478900360.415 [Default:CheckIn] Stopped
2016-11-11T21:39:20.415Z,1478900360.415 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T21:39:20.415Z,1478900360.415 [Default:CheckIn](INFO): Running loop #98
2016-11-11T21:39:20.415Z,1478900360.415 [Default:CheckIn] Running Loop=98
2016-11-11T21:39:20.415Z,1478900360.415 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T21:39:20.415Z,1478900360.415 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T21:39:21.010Z,1478900361.010 [NAL9602](INFO): Powering up
2016-11-11T21:39:32.137Z,1478900372.137 [NAL9602](INFO): NAL9602 initialized
2016-11-11T21:39:51.357Z,1478900391.357 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T21:39:51.357Z,1478900391.357 [BPC1] Data Fault, FailCount= 1
2016-11-11T21:39:51.357Z,1478900391.357 [BPC1](ERROR): Data Fault
2016-11-11T21:39:51.424Z,1478900391.424 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T21:39:52.620Z,1478900392.620 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:39:52.621Z,1478900392.621 [BPC1] No Fault, FailCount= 1
2016-11-11T21:39:59.040Z,1478900399.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:39:59.836Z,1478900399.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:40:08.976Z,1478900408.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:40:09.772Z,1478900409.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:40:10.188Z,1478900410.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:40:10.984Z,1478900410.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:40:11.781Z,1478900411.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:40:12.212Z,1478900412.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:40:13.008Z,1478900413.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:40:13.804Z,1478900413.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:40:36.996Z,1478900436.996 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:40:36.996Z,1478900436.996 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2016-11-11T21:40:36.996Z,1478900436.996 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:40:37.014Z,1478900437.014 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:40:37.416Z,1478900437.416 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:40:37.417Z,1478900437.417 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2016-11-11T21:40:37.833Z,1478900437.833 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:40:37.834Z,1478900437.834 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:40:37.834Z,1478900437.834 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:40:40.980Z,1478900440.980 [BPC1](ERROR): Failed to receive battery data
2016-11-11T21:40:40.980Z,1478900440.980 [BPC1] Communications Fault, FailCount= 1
2016-11-11T21:40:40.980Z,1478900440.980 [BPC1](ERROR): Communications Fault
2016-11-11T21:40:41.049Z,1478900441.049 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T21:40:42.240Z,1478900442.240 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:40:42.240Z,1478900442.240 [BPC1] No Fault, FailCount= 1
2016-11-11T21:41:21.777Z,1478900481.777 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T21:41:21.777Z,1478900481.777 [BPC1] Data Fault, FailCount= 1
2016-11-11T21:41:21.777Z,1478900481.777 [BPC1](ERROR): Data Fault
2016-11-11T21:41:21.847Z,1478900481.847 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T21:41:25.855Z,1478900485.855 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:41:25.855Z,1478900485.855 [BPC1] No Fault, FailCount= 1
2016-11-11T21:41:31.007Z,1478900491.007 [PNI_TCM](ERROR): CRC does not match. Expected:0x49271 got:0x48988
2016-11-11T21:41:35.810Z,1478900495.810 [PNI_TCM](ERROR): CRC does not match. Expected:0x40326 got:0x33049
2016-11-11T21:41:44.216Z,1478900504.216 [PNI_TCM](ERROR): CRC does not match. Expected:0x11579 got:0x35492
2016-11-11T21:42:10.589Z,1478900530.589 [BPC1](ERROR): Failed to receive battery data
2016-11-11T21:42:10.589Z,1478900530.589 [BPC1] Communications Fault, FailCount= 1
2016-11-11T21:42:10.589Z,1478900530.589 [BPC1](ERROR): Communications Fault
2016-11-11T21:42:10.644Z,1478900530.644 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T21:42:11.847Z,1478900531.847 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:42:11.847Z,1478900531.847 [BPC1] No Fault, FailCount= 1
2016-11-11T21:42:18.796Z,1478900538.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:42:19.592Z,1478900539.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:43:25.546Z,1478900605.546 [PNI_TCM](ERROR): CRC does not match. Expected:0x18021 got:0x50183
2016-11-11T21:43:25.546Z,1478900605.546 [PNI_TCM](ERROR): CRC does not match. Expected:0x58799 got:0x62215
2016-11-11T21:43:25.547Z,1478900605.547 [PNI_TCM](ERROR): CRC does not match. Expected:0x8656 got:0x30727
2016-11-11T21:43:25.547Z,1478900605.547 [PNI_TCM](ERROR): CRC does not match. Expected:0x31819 got:0x37383
2016-11-11T21:43:25.548Z,1478900605.548 [PNI_TCM](ERROR): CRC does not match. Expected:0x10651 got:0x24583
2016-11-11T21:43:25.548Z,1478900605.548 [PNI_TCM](ERROR): CRC does not match. Expected:0x3316 got:0x34311
2016-11-11T21:43:25.549Z,1478900605.549 [PNI_TCM](ERROR): CRC does not match. Expected:0x15477 got:0x24583
2016-11-11T21:43:25.549Z,1478900605.549 [PNI_TCM](ERROR): CRC does not match. Expected:0x52738 got:0x17159
2016-11-11T21:43:38.206Z,1478900618.206 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:43:38.206Z,1478900618.207 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 4
2016-11-11T21:43:38.207Z,1478900618.207 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:43:38.234Z,1478900618.234 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:43:38.602Z,1478900618.602 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:43:38.602Z,1478900618.602 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 4
2016-11-11T21:43:38.964Z,1478900618.964 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:43:38.965Z,1478900618.964 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:43:38.965Z,1478900618.965 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:44:20.596Z,1478900660.596 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T21:39:20.4Z
2016-11-11T21:44:20.596Z,1478900660.596 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T21:44:20.596Z,1478900660.596 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T21:44:25.675Z,1478900665.675 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0392.lzma
2016-11-11T21:44:26.478Z,1478900666.478 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0392.lzma.bak
2016-11-11T21:44:26.478Z,1478900666.478 [DataOverHttps](INFO): SBD MOMSN=4555791
2016-11-11T21:44:36.659Z,1478900676.659 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T21:44:36.767Z,1478900676.767 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20161111T044527/Express0393.lzma
2016-11-11T21:44:37.554Z,1478900677.554 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0393.lzma.bak
2016-11-11T21:44:37.554Z,1478900677.554 [DataOverHttps](INFO): SBD MOMSN=4555793
2016-11-11T21:44:38.900Z,1478900678.901 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T21:44:38.901Z,1478900678.901 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T21:44:38.901Z,1478900678.901 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T21:44:42.639Z,1478900682.639 [NAL9602](INFO): Powering down
2016-11-11T21:45:06.525Z,1478900706.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:45:07.320Z,1478900707.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:45:39.201Z,1478900739.201 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T21:45:39.201Z,1478900739.201 [BPC1] Data Fault, FailCount= 1
2016-11-11T21:45:39.201Z,1478900739.201 [BPC1](ERROR): Data Fault
2016-11-11T21:45:39.296Z,1478900739.296 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T21:45:43.348Z,1478900743.348 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:45:43.348Z,1478900743.348 [BPC1] No Fault, FailCount= 1
2016-11-11T21:46:18.953Z,1478900778.953 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T21:46:38.989Z,1478900798.989 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:46:38.989Z,1478900798.989 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 5
2016-11-11T21:46:38.989Z,1478900798.989 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:46:39.015Z,1478900799.015 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:46:39.390Z,1478900799.390 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:46:39.390Z,1478900799.390 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 5
2016-11-11T21:46:39.813Z,1478900799.813 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:46:39.814Z,1478900799.814 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:46:39.814Z,1478900799.814 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:47:54.240Z,1478900874.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:47:55.036Z,1478900875.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:48:13.553Z,1478900893.553 [PNI_TCM](ERROR): CRC does not match. Expected:0x36890 got:0x12873
2016-11-11T21:48:18.342Z,1478900898.342 [PNI_TCM](ERROR): CRC does not match. Expected:0x42090 got:0x6591
2016-11-11T21:48:23.141Z,1478900903.141 [PNI_TCM](ERROR): CRC does not match. Expected:0x9921 got:0x3613
2016-11-11T21:49:39.180Z,1478900979.180 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T21:49:39.180Z,1478900979.180 [Default:CheckIn:C.Wait] Stopped
2016-11-11T21:49:39.180Z,1478900979.180 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T21:49:39.180Z,1478900979.180 [Default:CheckIn:D] Running Loop=1
2016-11-11T21:49:39.580Z,1478900979.579 [Default:CheckIn:D] Stopped
2016-11-11T21:49:39.580Z,1478900979.579 [Default:CheckIn:E] Running Loop=1
2016-11-11T21:49:39.974Z,1478900979.974 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:49:39.974Z,1478900979.974 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 6
2016-11-11T21:49:39.974Z,1478900979.974 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:49:39.978Z,1478900979.978 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1019.637826 min 
2016-11-11T21:49:39.978Z,1478900979.978 [Default:CheckIn:E] Stopped
2016-11-11T21:49:39.978Z,1478900979.978 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T21:49:39.978Z,1478900979.978 [Default:CheckIn] Stopped
2016-11-11T21:49:39.978Z,1478900979.978 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T21:49:39.979Z,1478900979.978 [Default:CheckIn](INFO): Running loop #99
2016-11-11T21:49:39.979Z,1478900979.979 [Default:CheckIn] Running Loop=99
2016-11-11T21:49:39.979Z,1478900979.979 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T21:49:39.979Z,1478900979.979 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T21:49:39.998Z,1478900979.998 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:49:40.439Z,1478900980.439 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:49:40.440Z,1478900980.440 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 6
2016-11-11T21:49:40.708Z,1478900980.708 [NAL9602](INFO): Powering up
2016-11-11T21:49:40.854Z,1478900980.854 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:49:40.854Z,1478900980.854 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:49:40.855Z,1478900980.855 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:49:51.849Z,1478900991.849 [NAL9602](INFO): NAL9602 initialized
2016-11-11T21:49:52.649Z,1478900992.649 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T21:49:52.649Z,1478900992.649 [NAL9602] Data Fault, FailCount= 1
2016-11-11T21:49:52.649Z,1478900992.649 [NAL9602](ERROR): Data Fault
2016-11-11T21:49:52.840Z,1478900992.840 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T21:49:53.049Z,1478900993.049 [NAL9602](INFO): Powering down
2016-11-11T21:49:53.950Z,1478900993.950 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T21:49:53.950Z,1478900993.950 [NAL9602] No Fault, FailCount= 1
2016-11-11T21:49:58.249Z,1478900998.249 [NAL9602](INFO): Powering up NAL9602
2016-11-11T21:50:09.449Z,1478901009.449 [NAL9602](INFO): NAL9602 initialized
2016-11-11T21:50:11.956Z,1478901011.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:50:12.752Z,1478901012.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:50:13.236Z,1478901013.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:50:14.032Z,1478901014.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:50:14.829Z,1478901014.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:50:15.612Z,1478901015.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:50:16.408Z,1478901016.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:50:27.092Z,1478901027.092 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T21:50:27.092Z,1478901027.092 [BPC1] Data Fault, FailCount= 1
2016-11-11T21:50:27.093Z,1478901027.092 [BPC1](ERROR): Data Fault
2016-11-11T21:50:27.163Z,1478901027.163 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T21:50:28.328Z,1478901028.328 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:50:28.328Z,1478901028.328 [BPC1] No Fault, FailCount= 1
2016-11-11T21:51:51.869Z,1478901111.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:51:52.665Z,1478901112.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:51:53.432Z,1478901113.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:51:54.228Z,1478901114.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:51:55.025Z,1478901115.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:51:55.448Z,1478901115.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:52:40.894Z,1478901160.894 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:52:40.894Z,1478901160.894 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 7
2016-11-11T21:52:40.894Z,1478901160.894 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:52:40.928Z,1478901160.928 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:52:41.311Z,1478901161.311 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:52:41.311Z,1478901161.311 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 7
2016-11-11T21:52:47.736Z,1478901167.736 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:52:47.737Z,1478901167.737 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:52:47.737Z,1478901167.737 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:53:08.990Z,1478901188.990 [NAL9602](INFO): SBD MO Status=2, MOMSN=361, MT Status=2, MTMSN=0
2016-11-11T21:53:08.990Z,1478901188.990 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T21:54:18.984Z,1478901258.984 [BPC1](ERROR): Failed to receive battery data
2016-11-11T21:54:18.984Z,1478901258.984 [BPC1] Communications Fault, FailCount= 1
2016-11-11T21:54:18.984Z,1478901258.984 [BPC1](ERROR): Communications Fault
2016-11-11T21:54:19.062Z,1478901259.062 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T21:54:20.252Z,1478901260.252 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:54:20.252Z,1478901260.252 [BPC1] No Fault, FailCount= 1
2016-11-11T21:54:20.975Z,1478901260.975 [PNI_TCM](ERROR): CRC does not match. Expected:0x56996 got:0x49945
2016-11-11T21:54:27.381Z,1478901267.381 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T21:54:28.966Z,1478901268.966 [PNI_TCM](ERROR): CRC does not match. Expected:0x28118 got:0x16913
2016-11-11T21:54:40.195Z,1478901280.195 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T21:49:39.0Z
2016-11-11T21:54:40.196Z,1478901280.196 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T21:54:40.196Z,1478901280.196 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T21:54:45.168Z,1478901285.168 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0396.lzma
2016-11-11T21:54:45.970Z,1478901285.970 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0396.lzma.bak
2016-11-11T21:54:45.970Z,1478901285.970 [DataOverHttps](INFO): SBD MOMSN=4555796
2016-11-11T21:54:56.243Z,1478901296.243 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0397.lzma
2016-11-11T21:54:57.006Z,1478901297.006 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0397.lzma.bak
2016-11-11T21:54:57.006Z,1478901297.006 [DataOverHttps](INFO): SBD MOMSN=4555798
2016-11-11T21:54:58.419Z,1478901298.420 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T21:54:58.420Z,1478901298.420 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T21:54:58.420Z,1478901298.420 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T21:55:03.146Z,1478901303.146 [NAL9602](INFO): SBD MO Status=2, MOMSN=361, MT Status=2, MTMSN=0
2016-11-11T21:55:03.146Z,1478901303.146 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T21:55:06.776Z,1478901306.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:55:07.573Z,1478901307.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T21:55:16.780Z,1478901316.780 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T21:55:16.780Z,1478901316.780 [BPC1] Data Fault, FailCount= 1
2016-11-11T21:55:16.780Z,1478901316.780 [BPC1](ERROR): Data Fault
2016-11-11T21:55:16.844Z,1478901316.844 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T21:55:18.015Z,1478901318.015 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:55:18.015Z,1478901318.015 [BPC1] No Fault, FailCount= 1
2016-11-11T21:55:23.958Z,1478901323.958 [NAL9602](INFO): SBD MO Status=0, MOMSN=361, MT Status=0, MTMSN=0
2016-11-11T21:55:23.958Z,1478901323.958 [NAL9602](INFO): No messages in MT queue
2016-11-11T21:55:29.544Z,1478901329.544 [NAL9602](INFO): Powering down
2016-11-11T21:55:48.002Z,1478901348.002 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:55:48.002Z,1478901348.002 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 8
2016-11-11T21:55:48.002Z,1478901348.002 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:55:48.033Z,1478901348.033 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:55:48.442Z,1478901348.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:55:48.442Z,1478901348.442 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 8
2016-11-11T21:55:48.790Z,1478901348.790 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:55:48.791Z,1478901348.791 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:55:48.791Z,1478901348.792 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:56:15.613Z,1478901375.613 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T21:56:15.613Z,1478901375.613 [BPC1] Data Fault, FailCount= 1
2016-11-11T21:56:15.613Z,1478901375.613 [BPC1](ERROR): Data Fault
2016-11-11T21:56:15.688Z,1478901375.688 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T21:56:16.883Z,1478901376.884 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:56:16.884Z,1478901376.884 [BPC1] No Fault, FailCount= 1
2016-11-11T21:56:19.253Z,1478901379.253 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T21:58:48.931Z,1478901528.931 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T21:58:48.932Z,1478901528.932 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 9
2016-11-11T21:58:48.932Z,1478901528.932 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T21:58:48.995Z,1478901528.995 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T21:58:49.369Z,1478901529.369 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T21:58:49.370Z,1478901529.369 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 9
2016-11-11T21:58:49.736Z,1478901529.736 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T21:58:49.736Z,1478901529.736 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T21:58:49.737Z,1478901529.737 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T21:59:44.209Z,1478901584.209 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T21:59:44.209Z,1478901584.209 [BPC1] Data Fault, FailCount= 1
2016-11-11T21:59:44.209Z,1478901584.209 [BPC1](ERROR): Data Fault
2016-11-11T21:59:44.286Z,1478901584.286 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T21:59:45.484Z,1478901585.484 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T21:59:45.484Z,1478901585.484 [BPC1] No Fault, FailCount= 1
2016-11-11T21:59:58.663Z,1478901598.663 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T21:59:58.664Z,1478901598.664 [Default:CheckIn:C.Wait] Stopped
2016-11-11T21:59:58.664Z,1478901598.664 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T21:59:58.664Z,1478901598.664 [Default:CheckIn:D] Running Loop=1
2016-11-11T21:59:59.046Z,1478901599.046 [Default:CheckIn:D] Stopped
2016-11-11T21:59:59.046Z,1478901599.046 [Default:CheckIn:E] Running Loop=1
2016-11-11T21:59:59.452Z,1478901599.452 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1029.962240 min 
2016-11-11T21:59:59.453Z,1478901599.453 [Default:CheckIn:E] Stopped
2016-11-11T21:59:59.453Z,1478901599.453 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T21:59:59.453Z,1478901599.453 [Default:CheckIn] Stopped
2016-11-11T21:59:59.453Z,1478901599.453 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T21:59:59.453Z,1478901599.453 [Default:CheckIn](INFO): Running loop #100
2016-11-11T21:59:59.453Z,1478901599.453 [Default:CheckIn] Running Loop=100
2016-11-11T21:59:59.454Z,1478901599.454 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T21:59:59.454Z,1478901599.454 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T22:00:03.055Z,1478901603.055 [BPC1](ERROR): Failed to receive battery data
2016-11-11T22:00:03.055Z,1478901603.055 [BPC1] Communications Fault, FailCount= 2
2016-11-11T22:00:03.055Z,1478901603.055 [BPC1](ERROR): Communications Fault
2016-11-11T22:00:03.085Z,1478901603.085 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T22:00:03.156Z,1478901603.156 [NAL9602](INFO): Powering up
2016-11-11T22:00:03.962Z,1478901603.962 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:00:03.962Z,1478901603.962 [BPC1] No Fault, FailCount= 2
2016-11-11T22:00:14.301Z,1478901614.301 [NAL9602](INFO): NAL9602 initialized
2016-11-11T22:00:15.105Z,1478901615.105 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T22:00:15.105Z,1478901615.105 [NAL9602] Data Fault, FailCount= 1
2016-11-11T22:00:15.105Z,1478901615.105 [NAL9602](ERROR): Data Fault
2016-11-11T22:00:15.217Z,1478901615.217 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T22:00:15.501Z,1478901615.500 [NAL9602](INFO): Powering down
2016-11-11T22:00:16.378Z,1478901616.378 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T22:00:16.378Z,1478901616.378 [NAL9602] No Fault, FailCount= 1
2016-11-11T22:00:20.705Z,1478901620.705 [NAL9602](INFO): Powering up NAL9602
2016-11-11T22:00:31.908Z,1478901631.908 [NAL9602](INFO): NAL9602 initialized
2016-11-11T22:00:50.741Z,1478901650.741 [PNI_TCM](ERROR): CRC does not match. Expected:0x31714 got:0x43930
2016-11-11T22:00:51.154Z,1478901651.154 [PNI_TCM](ERROR): CRC does not match. Expected:0x10180 got:0x60416
2016-11-11T22:01:34.752Z,1478901694.752 [BPC1](ERROR): Failed to receive battery data
2016-11-11T22:01:34.752Z,1478901694.752 [BPC1] Communications Fault, FailCount= 1
2016-11-11T22:01:34.752Z,1478901694.752 [BPC1](ERROR): Communications Fault
2016-11-11T22:01:34.870Z,1478901694.870 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T22:01:36.049Z,1478901696.049 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:01:36.049Z,1478901696.049 [BPC1] No Fault, FailCount= 1
2016-11-11T22:01:47.542Z,1478901707.542 [BPC1](ERROR): Failed to parse message.
2016-11-11T22:01:47.542Z,1478901707.542 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T22:01:47.542Z,1478901707.542 [BPC1] Data Fault, FailCount= 2
2016-11-11T22:01:47.542Z,1478901707.542 [BPC1](ERROR): Data Fault
2016-11-11T22:01:47.615Z,1478901707.615 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T22:01:48.776Z,1478901708.776 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:01:48.777Z,1478901708.777 [BPC1] No Fault, FailCount= 2
2016-11-11T22:01:49.974Z,1478901709.974 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:01:49.974Z,1478901709.974 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 10
2016-11-11T22:01:49.974Z,1478901709.974 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:01:49.988Z,1478901709.989 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:01:50.374Z,1478901710.374 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:01:50.374Z,1478901710.374 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 10
2016-11-11T22:01:50.763Z,1478901710.763 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:01:50.763Z,1478901710.763 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:01:50.764Z,1478901710.764 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:02:07.165Z,1478901727.165 [BPC1](ERROR): Failed to receive battery data
2016-11-11T22:02:07.166Z,1478901727.165 [BPC1] Communications Fault, FailCount= 3
2016-11-11T22:02:07.166Z,1478901727.166 [BPC1](ERROR): Communications Fault
2016-11-11T22:02:07.270Z,1478901727.270 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T22:02:08.241Z,1478901728.241 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:02:08.241Z,1478901728.241 [BPC1] No Fault, FailCount= 3
2016-11-11T22:02:58.514Z,1478901778.514 [BPC1](ERROR): Failed to parse message.
2016-11-11T22:02:58.514Z,1478901778.514 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T22:02:58.514Z,1478901778.514 [BPC1] Data Fault, FailCount= 1
2016-11-11T22:02:58.514Z,1478901778.514 [BPC1](ERROR): Data Fault
2016-11-11T22:02:58.583Z,1478901778.583 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T22:02:59.780Z,1478901779.780 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:02:59.781Z,1478901779.781 [BPC1] No Fault, FailCount= 1
2016-11-11T22:03:02.804Z,1478901782.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:03:03.601Z,1478901783.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:03:28.586Z,1478901808.586 [NAL9602](INFO): SBD MO Status=2, MOMSN=362, MT Status=2, MTMSN=0
2016-11-11T22:03:28.586Z,1478901808.586 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T22:04:50.968Z,1478901890.968 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:04:50.969Z,1478901890.969 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 11
2016-11-11T22:04:50.969Z,1478901890.969 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:04:51.011Z,1478901891.011 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:04:51.432Z,1478901891.432 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:04:51.432Z,1478901891.432 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 11
2016-11-11T22:04:51.793Z,1478901891.793 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:04:51.794Z,1478901891.794 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:04:51.794Z,1478901891.794 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:04:59.795Z,1478901899.795 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T21:59:59.5Z
2016-11-11T22:04:59.795Z,1478901899.795 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T22:04:59.795Z,1478901899.795 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T22:05:04.239Z,1478901904.239 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0400.lzma
2016-11-11T22:05:05.031Z,1478901905.031 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0400.lzma.bak
2016-11-11T22:05:05.031Z,1478901905.031 [DataOverHttps](INFO): SBD MOMSN=4555804
2016-11-11T22:05:15.354Z,1478901915.354 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20161111T044527/Express0401.lzma
2016-11-11T22:05:35.534Z,1478901935.533 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0401.lzma.bak
2016-11-11T22:05:35.534Z,1478901935.534 [DataOverHttps](INFO): SBD MOMSN=4555806
2016-11-11T22:05:35.558Z,1478901935.558 [NAL9602](INFO): SBD MO Status=2, MOMSN=362, MT Status=2, MTMSN=0
2016-11-11T22:05:35.559Z,1478901935.559 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T22:05:35.624Z,1478901935.624 [BPC1](ERROR): Failed to receive battery data
2016-11-11T22:05:35.624Z,1478901935.624 [BPC1] Communications Fault, FailCount= 1
2016-11-11T22:05:35.624Z,1478901935.624 [BPC1](ERROR): Communications Fault
2016-11-11T22:05:35.696Z,1478901935.696 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T22:05:37.104Z,1478901937.104 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T22:05:37.176Z,1478901937.176 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T22:05:37.176Z,1478901937.177 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T22:05:37.177Z,1478901937.177 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T22:05:40.873Z,1478901940.873 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:05:40.873Z,1478901940.873 [BPC1] No Fault, FailCount= 1
2016-11-11T22:05:42.496Z,1478901942.496 [NAL9602](INFO): Powering down
2016-11-11T22:05:50.524Z,1478901950.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:05:51.322Z,1478901951.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:06:19.370Z,1478901979.370 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T22:07:52.147Z,1478902072.147 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:07:52.147Z,1478902072.148 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 12
2016-11-11T22:07:52.147Z,1478902072.148 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:07:52.162Z,1478902072.162 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:07:52.561Z,1478902072.561 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:07:52.562Z,1478902072.562 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 12
2016-11-11T22:07:52.957Z,1478902072.957 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:07:52.957Z,1478902072.957 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:07:52.957Z,1478902072.957 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:08:10.296Z,1478902090.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:08:11.092Z,1478902091.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:09:49.354Z,1478902189.354 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T22:09:49.354Z,1478902189.354 [BPC1] Data Fault, FailCount= 1
2016-11-11T22:09:49.354Z,1478902189.354 [BPC1](ERROR): Data Fault
2016-11-11T22:09:49.436Z,1478902189.436 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T22:09:50.618Z,1478902190.618 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:09:50.618Z,1478902190.618 [BPC1] No Fault, FailCount= 1
2016-11-11T22:10:37.382Z,1478902237.382 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T22:10:37.387Z,1478902237.387 [Default:CheckIn:C.Wait] Stopped
2016-11-11T22:10:37.387Z,1478902237.387 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T22:10:37.387Z,1478902237.387 [Default:CheckIn:D] Running Loop=1
2016-11-11T22:10:37.796Z,1478902237.796 [Default:CheckIn:D] Stopped
2016-11-11T22:10:37.796Z,1478902237.796 [Default:CheckIn:E] Running Loop=1
2016-11-11T22:10:38.195Z,1478902238.195 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1040.608073 min 
2016-11-11T22:10:38.195Z,1478902238.195 [Default:CheckIn:E] Stopped
2016-11-11T22:10:38.196Z,1478902238.196 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T22:10:38.196Z,1478902238.196 [Default:CheckIn] Stopped
2016-11-11T22:10:38.196Z,1478902238.196 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T22:10:38.196Z,1478902238.196 [Default:CheckIn](INFO): Running loop #101
2016-11-11T22:10:38.197Z,1478902238.197 [Default:CheckIn] Running Loop=101
2016-11-11T22:10:38.197Z,1478902238.197 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T22:10:38.197Z,1478902238.197 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T22:10:42.063Z,1478902242.063 [NAL9602](INFO): Powering up
2016-11-11T22:10:44.052Z,1478902244.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:10:44.848Z,1478902244.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:10:52.973Z,1478902252.973 [NAL9602](INFO): NAL9602 initialized
2016-11-11T22:10:53.029Z,1478902253.029 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:10:53.029Z,1478902253.029 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 13
2016-11-11T22:10:53.029Z,1478902253.029 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:10:53.055Z,1478902253.055 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:10:53.468Z,1478902253.468 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:10:53.468Z,1478902253.468 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 13
2016-11-11T22:10:53.777Z,1478902253.777 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T22:10:53.777Z,1478902253.777 [NAL9602] Data Fault, FailCount= 2
2016-11-11T22:10:53.777Z,1478902253.777 [NAL9602](ERROR): Data Fault
2016-11-11T22:10:53.850Z,1478902253.850 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:10:53.850Z,1478902253.850 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:10:53.851Z,1478902253.851 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:10:53.873Z,1478902253.872 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T22:10:54.173Z,1478902254.173 [NAL9602](INFO): Powering down
2016-11-11T22:10:55.074Z,1478902255.074 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T22:10:55.074Z,1478902255.074 [NAL9602] No Fault, FailCount= 2
2016-11-11T22:10:59.386Z,1478902259.385 [NAL9602](INFO): Powering up NAL9602
2016-11-11T22:11:10.573Z,1478902270.573 [NAL9602](INFO): NAL9602 initialized
2016-11-11T22:11:28.574Z,1478902288.574 [NAL9602](INFO): SBD MO Status=2, MOMSN=362, MT Status=2, MTMSN=0
2016-11-11T22:11:28.574Z,1478902288.574 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T22:12:08.851Z,1478902328.851 [PNI_TCM](ERROR): CRC does not match. Expected:0x8053 got:0x6335
2016-11-11T22:12:14.843Z,1478902334.843 [PNI_TCM](ERROR): CRC does not match. Expected:0x58138 got:0x48757
2016-11-11T22:12:16.010Z,1478902336.010 [NAL9602](INFO): SBD MO Status=2, MOMSN=362, MT Status=2, MTMSN=0
2016-11-11T22:12:16.010Z,1478902336.010 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T22:12:22.436Z,1478902342.436 [PNI_TCM](ERROR): CRC does not match. Expected:0x47869 got:0x48921
2016-11-11T22:12:28.844Z,1478902348.844 [PNI_TCM](ERROR): CRC does not match. Expected:0x17663 got:0x60608
2016-11-11T22:12:34.014Z,1478902354.014 [NAL9602](INFO): SBD MO Status=2, MOMSN=362, MT Status=2, MTMSN=0
2016-11-11T22:12:34.014Z,1478902354.014 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T22:12:49.590Z,1478902369.590 [PNI_TCM](ERROR): CRC does not match. Expected:0x56143 got:0x32888
2016-11-11T22:12:49.985Z,1478902369.985 [PNI_TCM](ERROR): CRC does not match. Expected:0x40724 got:0x23132
2016-11-11T22:12:51.185Z,1478902371.185 [PNI_TCM](ERROR): CRC does not match. Expected:0x24659 got:0x4376
2016-11-11T22:12:52.785Z,1478902372.785 [PNI_TCM](ERROR): CRC does not match. Expected:0x5516 got:0x49148
2016-11-11T22:12:58.758Z,1478902378.758 [NAL9602](INFO): SBD MO Status=0, MOMSN=362, MT Status=0, MTMSN=0
2016-11-11T22:12:58.758Z,1478902378.758 [NAL9602](INFO): No messages in MT queue
2016-11-11T22:13:17.812Z,1478902397.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:13:18.608Z,1478902398.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:13:36.802Z,1478902416.802 [BPC1](ERROR): Failed to receive battery data
2016-11-11T22:13:36.802Z,1478902416.802 [BPC1] Communications Fault, FailCount= 1
2016-11-11T22:13:36.802Z,1478902416.802 [BPC1](ERROR): Communications Fault
2016-11-11T22:13:36.859Z,1478902416.859 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T22:13:38.034Z,1478902418.034 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:13:38.034Z,1478902418.034 [BPC1] No Fault, FailCount= 1
2016-11-11T22:13:53.984Z,1478902433.984 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:13:53.984Z,1478902433.984 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 14
2016-11-11T22:13:53.984Z,1478902433.984 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:13:54.030Z,1478902434.030 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:13:54.476Z,1478902434.476 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:13:54.476Z,1478902434.476 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 14
2016-11-11T22:13:54.780Z,1478902434.780 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:13:54.780Z,1478902434.780 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:13:54.780Z,1478902434.780 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:15:38.324Z,1478902538.324 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T22:10:38.2Z
2016-11-11T22:15:38.324Z,1478902538.324 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T22:15:38.324Z,1478902538.324 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T22:15:43.459Z,1478902543.459 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0404.lzma
2016-11-11T22:15:44.262Z,1478902544.262 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0404.lzma.bak
2016-11-11T22:15:44.262Z,1478902544.262 [DataOverHttps](INFO): SBD MOMSN=4555811
2016-11-11T22:15:49.091Z,1478902549.091 [NAL9602](INFO): Powering down
2016-11-11T22:15:49.117Z,1478902549.117 [PNI_TCM](ERROR): CRC does not match. Expected:0x39377 got:0x32768
2016-11-11T22:15:49.118Z,1478902549.118 [PNI_TCM](ERROR): CRC does not match. Expected:0x55980 got:0x16384
2016-11-11T22:15:49.118Z,1478902549.118 [PNI_TCM](ERROR): CRC does not match. Expected:0x27287 got:0x32768
2016-11-11T22:15:49.119Z,1478902549.118 [PNI_TCM](ERROR): CRC does not match. Expected:0x61355 got:0x49152
2016-11-11T22:15:49.151Z,1478902549.151 [PNI_TCM](ERROR): CRC does not match. Expected:0x64874 got:0x16384
2016-11-11T22:15:49.152Z,1478902549.152 [PNI_TCM](ERROR): CRC does not match. Expected:0x61455 got:0x0
2016-11-11T22:15:49.152Z,1478902549.152 [PNI_TCM](ERROR): CRC does not match. Expected:0x42411 got:0x32768
2016-11-11T22:15:49.153Z,1478902549.152 [PNI_TCM](ERROR): CRC does not match. Expected:0x45624 got:0x49152
2016-11-11T22:15:51.561Z,1478902551.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:15:52.356Z,1478902552.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:15:54.345Z,1478902554.345 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0405.lzma
2016-11-11T22:15:55.146Z,1478902555.146 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0405.lzma.bak
2016-11-11T22:15:55.146Z,1478902555.146 [DataOverHttps](INFO): SBD MOMSN=4555813
2016-11-11T22:15:56.610Z,1478902556.610 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T22:15:56.610Z,1478902556.610 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T22:15:56.610Z,1478902556.610 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T22:16:19.567Z,1478902579.567 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T22:16:55.159Z,1478902615.159 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:16:55.167Z,1478902615.167 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 15
2016-11-11T22:16:55.167Z,1478902615.167 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:16:55.208Z,1478902615.208 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:16:55.613Z,1478902615.613 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:16:55.613Z,1478902615.613 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 15
2016-11-11T22:16:55.984Z,1478902615.984 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:16:55.985Z,1478902615.985 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:16:55.985Z,1478902615.985 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:18:25.296Z,1478902705.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:18:26.092Z,1478902706.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:18:39.268Z,1478902719.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:18:40.064Z,1478902720.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:19:28.948Z,1478902768.948 [PNI_TCM](ERROR): CRC does not match. Expected:0x23350 got:0x21533
2016-11-11T22:19:32.142Z,1478902772.142 [PNI_TCM](ERROR): CRC does not match. Expected:0x52769 got:0x23413
2016-11-11T22:19:32.950Z,1478902772.950 [BPC1](ERROR): Failed to receive battery data
2016-11-11T22:19:32.950Z,1478902772.950 [BPC1] Communications Fault, FailCount= 1
2016-11-11T22:19:32.950Z,1478902772.950 [BPC1](ERROR): Communications Fault
2016-11-11T22:19:33.030Z,1478902773.030 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T22:19:33.746Z,1478902773.746 [PNI_TCM](ERROR): CRC does not match. Expected:0x39393 got:0x49579
2016-11-11T22:19:34.183Z,1478902774.183 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:19:34.183Z,1478902774.183 [BPC1] No Fault, FailCount= 1
2016-11-11T22:19:35.337Z,1478902775.337 [PNI_TCM](ERROR): CRC does not match. Expected:0x64861 got:0x17031
2016-11-11T22:19:36.946Z,1478902776.946 [PNI_TCM](ERROR): CRC does not match. Expected:0x23888 got:0x7490
2016-11-11T22:19:56.170Z,1478902796.170 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:19:56.170Z,1478902796.170 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 16
2016-11-11T22:19:56.170Z,1478902796.171 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:19:56.186Z,1478902796.186 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:19:56.611Z,1478902796.611 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:19:56.612Z,1478902796.612 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 16
2016-11-11T22:19:56.981Z,1478902796.981 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:19:56.981Z,1478902796.981 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:19:56.982Z,1478902796.982 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:20:46.957Z,1478902846.957 [BPC1](ERROR): Failed to receive battery data
2016-11-11T22:20:46.957Z,1478902846.957 [BPC1] Communications Fault, FailCount= 1
2016-11-11T22:20:46.957Z,1478902846.957 [BPC1](ERROR): Communications Fault
2016-11-11T22:20:47.032Z,1478902847.032 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T22:20:48.266Z,1478902848.266 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:20:48.267Z,1478902848.267 [BPC1] No Fault, FailCount= 1
2016-11-11T22:20:57.026Z,1478902857.026 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T22:20:57.027Z,1478902857.027 [Default:CheckIn:C.Wait] Stopped
2016-11-11T22:20:57.027Z,1478902857.027 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T22:20:57.027Z,1478902857.027 [Default:CheckIn:D] Running Loop=1
2016-11-11T22:20:57.381Z,1478902857.381 [Default:CheckIn:D] Stopped
2016-11-11T22:20:57.381Z,1478902857.381 [Default:CheckIn:E] Running Loop=1
2016-11-11T22:20:57.788Z,1478902857.788 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1050.934505 min 
2016-11-11T22:20:57.789Z,1478902857.789 [Default:CheckIn:E] Stopped
2016-11-11T22:20:57.789Z,1478902857.789 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T22:20:57.789Z,1478902857.789 [Default:CheckIn] Stopped
2016-11-11T22:20:57.789Z,1478902857.789 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T22:20:57.789Z,1478902857.789 [Default:CheckIn](INFO): Running loop #102
2016-11-11T22:20:57.789Z,1478902857.789 [Default:CheckIn] Running Loop=102
2016-11-11T22:20:57.789Z,1478902857.789 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T22:20:57.790Z,1478902857.790 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T22:21:01.210Z,1478902861.210 [NAL9602](INFO): Powering up
2016-11-11T22:21:12.401Z,1478902872.401 [NAL9602](INFO): NAL9602 initialized
2016-11-11T22:21:13.036Z,1478902873.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:21:13.197Z,1478902873.197 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T22:21:13.197Z,1478902873.197 [NAL9602] Data Fault, FailCount= 1
2016-11-11T22:21:13.197Z,1478902873.197 [NAL9602](ERROR): Data Fault
2016-11-11T22:21:13.290Z,1478902873.290 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T22:21:13.601Z,1478902873.601 [NAL9602](INFO): Powering down
2016-11-11T22:21:13.832Z,1478902873.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:21:14.478Z,1478902874.478 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T22:21:14.478Z,1478902874.478 [NAL9602] No Fault, FailCount= 1
2016-11-11T22:21:18.804Z,1478902878.804 [NAL9602](INFO): Powering up NAL9602
2016-11-11T22:21:29.997Z,1478902889.997 [NAL9602](INFO): NAL9602 initialized
2016-11-11T22:22:03.081Z,1478902923.081 [BPC1](ERROR): Failed to receive battery data
2016-11-11T22:22:03.081Z,1478902923.081 [BPC1] Communications Fault, FailCount= 1
2016-11-11T22:22:03.081Z,1478902923.081 [BPC1](ERROR): Communications Fault
2016-11-11T22:22:03.112Z,1478902923.112 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T22:22:04.274Z,1478902924.274 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:22:04.274Z,1478902924.274 [BPC1] No Fault, FailCount= 1
2016-11-11T22:22:16.222Z,1478902936.222 [NAL9602](INFO): SBD MO Status=0, MOMSN=363, MT Status=0, MTMSN=0
2016-11-11T22:22:16.222Z,1478902936.222 [NAL9602](INFO): No messages in MT queue
2016-11-11T22:22:39.050Z,1478902959.050 [PNI_TCM](ERROR): CRC does not match. Expected:0x17627 got:0x4433
2016-11-11T22:22:57.094Z,1478902977.093 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:22:57.094Z,1478902977.094 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 17
2016-11-11T22:22:57.094Z,1478902977.094 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:22:57.141Z,1478902977.141 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:22:57.534Z,1478902977.534 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:22:57.534Z,1478902977.534 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 17
2016-11-11T22:22:57.913Z,1478902977.913 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:22:57.914Z,1478902977.914 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:22:57.914Z,1478902977.914 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:23:46.032Z,1478903026.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:23:46.829Z,1478903026.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:24:46.849Z,1478903086.849 [PNI_TCM](ERROR): CRC does not match. Expected:0x54554 got:0x54
2016-11-11T22:24:47.632Z,1478903087.632 [PNI_TCM](ERROR): CRC does not match. Expected:0x974 got:0x37139
2016-11-11T22:24:50.426Z,1478903090.427 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T22:24:50.830Z,1478903090.829 [PNI_TCM](ERROR): CRC does not match. Expected:0x61558 got:0x16913
2016-11-11T22:24:56.434Z,1478903096.434 [PNI_TCM](ERROR): CRC does not match. Expected:0x50624 got:0x18459
2016-11-11T22:24:58.039Z,1478903098.039 [PNI_TCM](ERROR): CRC does not match. Expected:0x19208 got:0x41857
2016-11-11T22:25:58.101Z,1478903158.101 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:25:58.101Z,1478903158.101 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 18
2016-11-11T22:25:58.101Z,1478903158.101 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:25:58.104Z,1478903158.104 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T22:20:57.8Z
2016-11-11T22:25:58.104Z,1478903158.104 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T22:25:58.105Z,1478903158.105 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T22:25:58.116Z,1478903158.116 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:25:58.559Z,1478903158.559 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:25:58.559Z,1478903158.559 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 18
2016-11-11T22:26:02.604Z,1478903162.604 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:26:02.604Z,1478903162.604 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:26:02.604Z,1478903162.604 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:26:02.639Z,1478903162.639 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0408.lzma
2016-11-11T22:26:03.442Z,1478903163.442 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0408.lzma.bak
2016-11-11T22:26:03.442Z,1478903163.442 [DataOverHttps](INFO): SBD MOMSN=4555819
2016-11-11T22:26:09.140Z,1478903169.140 [NAL9602](INFO): Powering down
2016-11-11T22:26:14.448Z,1478903174.448 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20161111T044527/Express0409.lzma
2016-11-11T22:26:15.272Z,1478903175.272 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0409.lzma.bak
2016-11-11T22:26:15.273Z,1478903175.273 [DataOverHttps](INFO): SBD MOMSN=4555821
2016-11-11T22:26:16.670Z,1478903176.670 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T22:26:16.670Z,1478903176.671 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T22:26:16.671Z,1478903176.671 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T22:26:20.251Z,1478903180.251 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T22:26:48.488Z,1478903208.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:26:49.284Z,1478903209.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:29:02.822Z,1478903342.822 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:29:02.822Z,1478903342.822 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 19
2016-11-11T22:29:02.822Z,1478903342.822 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:29:02.849Z,1478903342.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:29:03.293Z,1478903343.293 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:29:03.293Z,1478903343.293 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 19
2016-11-11T22:29:03.652Z,1478903343.652 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:29:03.653Z,1478903343.653 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:29:03.653Z,1478903343.653 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:29:07.496Z,1478903347.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:29:08.294Z,1478903348.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:29:20.947Z,1478903360.947 [PNI_TCM](ERROR): CRC does not match. Expected:0x38948 got:0x32007
2016-11-11T22:29:20.948Z,1478903360.948 [PNI_TCM](ERROR): CRC does not match. Expected:0x65492 got:0x33543
2016-11-11T22:29:20.948Z,1478903360.948 [PNI_TCM](ERROR): CRC does not match. Expected:0x47090 got:0x50439
2016-11-11T22:29:20.949Z,1478903360.949 [PNI_TCM](ERROR): CRC does not match. Expected:0x23825 got:0x38151
2016-11-11T22:29:20.949Z,1478903360.949 [PNI_TCM](ERROR): CRC does not match. Expected:0x34537 got:0x18695
2016-11-11T22:29:20.949Z,1478903360.949 [PNI_TCM](ERROR): CRC does not match. Expected:0x50684 got:0x21255
2016-11-11T22:29:20.950Z,1478903360.950 [PNI_TCM](ERROR): CRC does not match. Expected:0x7161 got:0x54279
2016-11-11T22:29:20.950Z,1478903360.950 [PNI_TCM](ERROR): CRC does not match. Expected:0x35720 got:0x6407
2016-11-11T22:29:22.272Z,1478903362.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:29:23.068Z,1478903363.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:29:46.120Z,1478903386.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:29:46.916Z,1478903386.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:29:47.328Z,1478903387.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:30:21.468Z,1478903421.468 [BPC1](ERROR): Failed to receive battery data
2016-11-11T22:30:21.468Z,1478903421.468 [BPC1] Communications Fault, FailCount= 1
2016-11-11T22:30:21.468Z,1478903421.468 [BPC1](ERROR): Communications Fault
2016-11-11T22:30:21.534Z,1478903421.533 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T22:30:22.735Z,1478903422.735 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:30:22.735Z,1478903422.736 [BPC1] No Fault, FailCount= 1
2016-11-11T22:30:47.861Z,1478903447.861 [PNI_TCM](ERROR): CRC does not match. Expected:0x35512 got:0x48849
2016-11-11T22:30:51.063Z,1478903451.063 [PNI_TCM](ERROR): CRC does not match. Expected:0x16738 got:0x49149
2016-11-11T22:30:52.661Z,1478903452.661 [PNI_TCM](ERROR): CRC does not match. Expected:0x59056 got:0x6978
2016-11-11T22:31:17.100Z,1478903477.100 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T22:31:17.101Z,1478903477.101 [Default:CheckIn:C.Wait] Stopped
2016-11-11T22:31:17.101Z,1478903477.101 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T22:31:17.101Z,1478903477.101 [Default:CheckIn:D] Running Loop=1
2016-11-11T22:31:17.496Z,1478903477.496 [Default:CheckIn:D] Stopped
2016-11-11T22:31:17.496Z,1478903477.496 [Default:CheckIn:E] Running Loop=1
2016-11-11T22:31:17.901Z,1478903477.901 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1061.269792 min 
2016-11-11T22:31:17.901Z,1478903477.901 [Default:CheckIn:E] Stopped
2016-11-11T22:31:17.901Z,1478903477.901 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T22:31:17.901Z,1478903477.901 [Default:CheckIn] Stopped
2016-11-11T22:31:17.902Z,1478903477.902 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T22:31:17.902Z,1478903477.902 [Default:CheckIn](INFO): Running loop #103
2016-11-11T22:31:17.902Z,1478903477.902 [Default:CheckIn] Running Loop=103
2016-11-11T22:31:17.902Z,1478903477.902 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T22:31:17.902Z,1478903477.902 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T22:31:21.680Z,1478903481.680 [NAL9602](INFO): Powering up
2016-11-11T22:31:32.845Z,1478903492.845 [NAL9602](INFO): NAL9602 initialized
2016-11-11T22:31:33.645Z,1478903493.645 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T22:31:33.645Z,1478903493.645 [NAL9602] Data Fault, FailCount= 1
2016-11-11T22:31:33.645Z,1478903493.645 [NAL9602](ERROR): Data Fault
2016-11-11T22:31:33.762Z,1478903493.762 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T22:31:34.045Z,1478903494.045 [NAL9602](INFO): Powering down
2016-11-11T22:31:34.996Z,1478903494.996 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T22:31:34.996Z,1478903494.996 [NAL9602] No Fault, FailCount= 1
2016-11-11T22:31:39.245Z,1478903499.245 [NAL9602](INFO): Powering up NAL9602
2016-11-11T22:31:50.461Z,1478903510.461 [NAL9602](INFO): NAL9602 initialized
2016-11-11T22:32:03.771Z,1478903523.771 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:32:03.779Z,1478903523.779 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 20
2016-11-11T22:32:03.779Z,1478903523.779 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:32:03.819Z,1478903523.819 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:32:04.214Z,1478903524.214 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:32:04.214Z,1478903524.214 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 20
2016-11-11T22:32:04.532Z,1478903524.532 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:32:04.533Z,1478903524.533 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:32:04.533Z,1478903524.533 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:32:35.710Z,1478903555.710 [NAL9602](INFO): SBD MO Status=2, MOMSN=364, MT Status=2, MTMSN=0
2016-11-11T22:32:35.710Z,1478903555.710 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T22:33:05.314Z,1478903585.314 [NAL9602](INFO): SBD MO Status=2, MOMSN=364, MT Status=2, MTMSN=0
2016-11-11T22:33:05.314Z,1478903585.314 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T22:34:29.772Z,1478903669.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:34:30.577Z,1478903670.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:34:48.598Z,1478903688.598 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T22:34:48.598Z,1478903688.598 [BPC1] Data Fault, FailCount= 1
2016-11-11T22:34:48.598Z,1478903688.598 [BPC1](ERROR): Data Fault
2016-11-11T22:34:48.628Z,1478903688.628 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T22:34:49.843Z,1478903689.843 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:34:49.843Z,1478903689.843 [BPC1] No Fault, FailCount= 1
2016-11-11T22:35:04.642Z,1478903704.642 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:35:04.642Z,1478903704.642 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 21
2016-11-11T22:35:04.642Z,1478903704.642 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:35:04.679Z,1478903704.679 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:35:05.045Z,1478903705.045 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:35:05.045Z,1478903705.045 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 21
2016-11-11T22:35:05.414Z,1478903705.414 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:35:05.415Z,1478903705.415 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:35:05.415Z,1478903705.415 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:36:17.911Z,1478903777.911 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T22:31:17.9Z
2016-11-11T22:36:17.911Z,1478903777.911 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T22:36:17.911Z,1478903777.911 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T22:36:22.493Z,1478903782.493 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T22:36:22.516Z,1478903782.516 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0412.lzma
2016-11-11T22:36:23.302Z,1478903783.302 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0412.lzma.bak
2016-11-11T22:36:23.302Z,1478903783.302 [DataOverHttps](INFO): SBD MOMSN=4555825
2016-11-11T22:36:37.415Z,1478903797.415 [DataOverHttps](INFO): Sending 162 bytes from file Logs/20161111T044527/Express0413.lzma
2016-11-11T22:36:38.202Z,1478903798.202 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0413.lzma.bak
2016-11-11T22:36:38.202Z,1478903798.202 [DataOverHttps](INFO): SBD MOMSN=4555827
2016-11-11T22:36:40.520Z,1478903800.520 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T22:36:40.520Z,1478903800.520 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T22:36:40.520Z,1478903800.520 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T22:36:53.524Z,1478903813.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:36:53.631Z,1478903813.631 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T22:36:54.320Z,1478903814.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:36:59.250Z,1478903819.250 [NAL9602](INFO): Powering down
2016-11-11T22:37:01.665Z,1478903821.665 [PNI_TCM](ERROR): CRC does not match. Expected:0x49379 got:0x7361
2016-11-11T22:37:03.318Z,1478903823.318 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T22:37:04.854Z,1478903824.855 [PNI_TCM](ERROR): CRC does not match. Expected:0x33219 got:0x47330
2016-11-11T22:37:06.854Z,1478903826.854 [PNI_TCM](ERROR): CRC does not match. Expected:0x1824 got:0x2950
2016-11-11T22:38:05.637Z,1478903885.637 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:38:05.637Z,1478903885.637 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 22
2016-11-11T22:38:05.637Z,1478903885.637 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:38:05.671Z,1478903885.671 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:38:06.054Z,1478903886.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:38:06.054Z,1478903886.054 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 22
2016-11-11T22:38:06.435Z,1478903886.435 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:38:06.436Z,1478903886.436 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:38:06.436Z,1478903886.436 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:38:57.621Z,1478903937.621 [BPC1](ERROR): Failed to parse message.
2016-11-11T22:38:57.621Z,1478903937.621 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T22:38:57.621Z,1478903937.621 [BPC1] Data Fault, FailCount= 1
2016-11-11T22:38:57.621Z,1478903937.621 [BPC1](ERROR): Data Fault
2016-11-11T22:38:57.719Z,1478903937.719 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T22:38:58.862Z,1478903938.862 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:38:58.862Z,1478903938.862 [BPC1] No Fault, FailCount= 1
2016-11-11T22:39:41.280Z,1478903981.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:39:42.076Z,1478903982.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:39:55.676Z,1478903995.676 [BPC1](ERROR): Failed to parse message.
2016-11-11T22:39:55.676Z,1478903995.676 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T22:39:55.677Z,1478903995.677 [BPC1] Data Fault, FailCount= 1
2016-11-11T22:39:55.677Z,1478903995.677 [BPC1](ERROR): Data Fault
2016-11-11T22:39:55.706Z,1478903995.706 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T22:39:56.918Z,1478903996.918 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:39:56.919Z,1478903996.918 [BPC1] No Fault, FailCount= 1
2016-11-11T22:40:20.476Z,1478904020.476 [BPC1](ERROR): Failed to parse message.
2016-11-11T22:40:20.476Z,1478904020.476 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T22:40:20.476Z,1478904020.476 [BPC1] Data Fault, FailCount= 1
2016-11-11T22:40:20.477Z,1478904020.477 [BPC1](ERROR): Data Fault
2016-11-11T22:40:20.506Z,1478904020.506 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T22:40:21.714Z,1478904021.714 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:40:21.714Z,1478904021.714 [BPC1] No Fault, FailCount= 1
2016-11-11T22:41:06.532Z,1478904066.532 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:41:06.532Z,1478904066.532 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 23
2016-11-11T22:41:06.532Z,1478904066.532 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:41:06.582Z,1478904066.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:41:06.958Z,1478904066.958 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:41:06.959Z,1478904066.958 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 23
2016-11-11T22:41:07.342Z,1478904067.342 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:41:07.371Z,1478904067.371 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:41:07.371Z,1478904067.371 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:41:40.990Z,1478904100.990 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T22:41:40.990Z,1478904100.990 [Default:CheckIn:C.Wait] Stopped
2016-11-11T22:41:40.991Z,1478904100.991 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T22:41:40.991Z,1478904100.991 [Default:CheckIn:D] Running Loop=1
2016-11-11T22:41:41.334Z,1478904101.334 [Default:CheckIn:D] Stopped
2016-11-11T22:41:41.334Z,1478904101.334 [Default:CheckIn:E] Running Loop=1
2016-11-11T22:41:41.896Z,1478904101.897 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1071.667057 min 
2016-11-11T22:41:41.897Z,1478904101.897 [Default:CheckIn:E] Stopped
2016-11-11T22:41:41.897Z,1478904101.897 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T22:41:41.897Z,1478904101.897 [Default:CheckIn] Stopped
2016-11-11T22:41:41.897Z,1478904101.897 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T22:41:41.897Z,1478904101.897 [Default:CheckIn](INFO): Running loop #104
2016-11-11T22:41:41.897Z,1478904101.898 [Default:CheckIn] Running Loop=104
2016-11-11T22:41:41.898Z,1478904101.898 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T22:41:41.898Z,1478904101.898 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T22:41:48.932Z,1478904108.932 [BPC1](ERROR): Failed to receive battery data
2016-11-11T22:41:48.932Z,1478904108.932 [BPC1] Communications Fault, FailCount= 1
2016-11-11T22:41:48.932Z,1478904108.932 [BPC1](ERROR): Communications Fault
2016-11-11T22:41:49.086Z,1478904109.086 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T22:41:49.137Z,1478904109.137 [NAL9602](INFO): Powering up
2016-11-11T22:41:50.054Z,1478904110.054 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:41:50.054Z,1478904110.055 [BPC1] No Fault, FailCount= 1
2016-11-11T22:42:00.317Z,1478904120.317 [NAL9602](INFO): NAL9602 initialized
2016-11-11T22:42:01.125Z,1478904121.125 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T22:42:01.125Z,1478904121.125 [NAL9602] Data Fault, FailCount= 2
2016-11-11T22:42:01.125Z,1478904121.125 [NAL9602](ERROR): Data Fault
2016-11-11T22:42:01.276Z,1478904121.276 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T22:42:01.516Z,1478904121.516 [NAL9602](INFO): Powering down
2016-11-11T22:42:02.434Z,1478904122.434 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T22:42:02.434Z,1478904122.434 [NAL9602] No Fault, FailCount= 2
2016-11-11T22:42:06.716Z,1478904126.717 [NAL9602](INFO): Powering up NAL9602
2016-11-11T22:42:17.517Z,1478904137.517 [NAL9602](INFO): NAL9602 initialized
2016-11-11T22:42:21.170Z,1478904141.170 [PNI_TCM](ERROR): CRC does not match. Expected:0x47788 got:0x28701
2016-11-11T22:42:23.150Z,1478904143.150 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2016-11-11T22:42:24.342Z,1478904144.342 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2016-11-11T22:42:24.741Z,1478904144.741 [PNI_TCM](ERROR): CRC does not match. Expected:0x65128 got:0x13165
2016-11-11T22:42:26.342Z,1478904146.342 [PNI_TCM](ERROR): CRC does not match. Expected:0x48266 got:0x238
2016-11-11T22:42:29.150Z,1478904149.150 [PNI_TCM](ERROR): CRC does not match. Expected:0x42636 got:0x24423
2016-11-11T22:42:30.742Z,1478904150.742 [PNI_TCM](ERROR): CRC does not match. Expected:0x55062 got:0x43899
2016-11-11T22:42:33.942Z,1478904153.942 [PNI_TCM](ERROR): CRC does not match. Expected:0x24971 got:0x27965
2016-11-11T22:42:34.346Z,1478904154.346 [BPC1](ERROR): Failed to receive battery data
2016-11-11T22:42:34.346Z,1478904154.346 [BPC1] Communications Fault, FailCount= 1
2016-11-11T22:42:34.346Z,1478904154.346 [BPC1](ERROR): Communications Fault
2016-11-11T22:42:34.426Z,1478904154.426 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T22:42:35.604Z,1478904155.604 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:42:35.604Z,1478904155.604 [BPC1] No Fault, FailCount= 1
2016-11-11T22:42:35.929Z,1478904155.930 [NAL9602](INFO): SBD MO Status=2, MOMSN=364, MT Status=2, MTMSN=0
2016-11-11T22:42:35.930Z,1478904155.930 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T22:43:00.286Z,1478904180.286 [PNI_TCM](ERROR): CRC does not match. Expected:0x62471 got:0x16877
2016-11-11T22:43:01.874Z,1478904181.874 [NAL9602](INFO): SBD MO Status=2, MOMSN=364, MT Status=2, MTMSN=0
2016-11-11T22:43:01.874Z,1478904181.874 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T22:43:03.094Z,1478904183.094 [PNI_TCM](ERROR): CRC does not match. Expected:0x27945 got:0x7490
2016-11-11T22:43:07.486Z,1478904187.486 [PNI_TCM](ERROR): CRC does not match. Expected:0x62989 got:0x16435
2016-11-11T22:43:10.685Z,1478904190.685 [PNI_TCM](ERROR): CRC does not match. Expected:0x22737 got:0x60544
2016-11-11T22:44:07.552Z,1478904247.552 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:44:07.552Z,1478904247.552 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 24
2016-11-11T22:44:07.552Z,1478904247.552 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:44:07.582Z,1478904247.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:44:08.054Z,1478904248.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:44:08.054Z,1478904248.054 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 24
2016-11-11T22:44:08.365Z,1478904248.365 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:44:08.365Z,1478904248.365 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:44:08.366Z,1478904248.366 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:44:18.756Z,1478904258.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:44:19.552Z,1478904259.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:44:20.036Z,1478904260.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:44:20.832Z,1478904260.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:44:21.628Z,1478904261.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:44:22.404Z,1478904262.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:44:23.200Z,1478904263.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:44:23.996Z,1478904263.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:44:24.408Z,1478904264.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:44:25.204Z,1478904265.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:44:25.912Z,1478904265.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:44:32.752Z,1478904272.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:44:33.548Z,1478904273.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:44:34.008Z,1478904274.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:44:34.804Z,1478904274.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:44:35.600Z,1478904275.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:44:36.396Z,1478904276.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:44:37.192Z,1478904277.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:46:22.618Z,1478904382.618 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T22:46:42.181Z,1478904402.181 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T22:46:42.181Z,1478904402.181 [BPC1] Data Fault, FailCount= 1
2016-11-11T22:46:42.181Z,1478904402.181 [BPC1](ERROR): Data Fault
2016-11-11T22:46:42.200Z,1478904402.200 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T22:41:41.9Z
2016-11-11T22:46:42.200Z,1478904402.201 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T22:46:42.201Z,1478904402.201 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T22:46:42.212Z,1478904402.212 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T22:47:16.104Z,1478904436.104 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:47:16.104Z,1478904436.104 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 25
2016-11-11T22:47:16.104Z,1478904436.104 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:47:16.155Z,1478904436.155 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:47:16.345Z,1478904436.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:47:16.345Z,1478904436.345 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 25
2016-11-11T22:47:16.346Z,1478904436.346 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:47:16.346Z,1478904436.346 [BPC1] No Fault, FailCount= 1
2016-11-11T22:47:16.726Z,1478904436.726 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:47:16.726Z,1478904436.726 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:47:16.727Z,1478904436.727 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:47:23.189Z,1478904443.189 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T22:47:23.378Z,1478904443.378 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0416.lzma
2016-11-11T22:47:24.162Z,1478904444.162 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0416.lzma.bak
2016-11-11T22:47:24.162Z,1478904444.162 [DataOverHttps](INFO): SBD MOMSN=4555831
2016-11-11T22:47:35.571Z,1478904455.571 [NAL9602](INFO): Powering down
2016-11-11T22:47:35.724Z,1478904455.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:47:36.520Z,1478904456.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:47:40.854Z,1478904460.854 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0417.lzma
2016-11-11T22:47:41.638Z,1478904461.638 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0417.lzma.bak
2016-11-11T22:47:41.638Z,1478904461.638 [DataOverHttps](INFO): SBD MOMSN=4555833
2016-11-11T22:47:42.998Z,1478904462.998 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T22:47:42.998Z,1478904462.998 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T22:47:42.998Z,1478904462.998 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T22:47:46.519Z,1478904466.519 [CBIT](IMPORTANT): Beginning ground fault scan
2016-11-11T22:47:50.464Z,1478904470.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:47:51.260Z,1478904471.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:47:55.011Z,1478904475.011 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T22:47:56.608Z,1478904476.608 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2016-11-11T22:47:56.659Z,1478904476.659 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.022928
CHAN A1 (24V): 0.000373
CHAN A2 (12V): 0.008103
CHAN A3 (5V): 0.001828
CHAN B0 (3.3V): 0.000035
CHAN B1 (3.15aV): 0.000046
CHAN B2 (3.15bV): -0.000605
CHAN B3 (GND): -0.003688
OPEN: 0.003952
Full Scale Calc: 4.765 mA, -1.589 mA
2016-11-11T22:47:57.003Z,1478904477.003 [PNI_TCM](ERROR): CRC does not match. Expected:0x10797 got:0x135
2016-11-11T22:48:38.613Z,1478904518.613 [BPC1](ERROR): Failed to receive battery data
2016-11-11T22:48:38.613Z,1478904518.613 [BPC1] Communications Fault, FailCount= 1
2016-11-11T22:48:38.613Z,1478904518.614 [BPC1](ERROR): Communications Fault
2016-11-11T22:48:38.643Z,1478904518.644 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T22:48:39.852Z,1478904519.852 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:48:39.852Z,1478904519.852 [BPC1] No Fault, FailCount= 1
2016-11-11T22:48:49.157Z,1478904529.157 [PNI_TCM](ERROR): CRC does not match. Expected:0x38865 got:0x48991
2016-11-11T22:48:50.757Z,1478904530.757 [PNI_TCM](ERROR): CRC does not match. Expected:0x1183 got:0x7361
2016-11-11T22:48:53.566Z,1478904533.566 [PNI_TCM](ERROR): CRC does not match. Expected:0x54882 got:0x23559
2016-11-11T22:48:58.373Z,1478904538.373 [PNI_TCM](ERROR): CRC does not match. Expected:0x50317 got:0x4459
2016-11-11T22:49:43.563Z,1478904583.563 [BPC1](ERROR): Failed to receive battery data
2016-11-11T22:49:43.564Z,1478904583.564 [BPC1] Communications Fault, FailCount= 1
2016-11-11T22:49:43.564Z,1478904583.564 [BPC1](ERROR): Communications Fault
2016-11-11T22:49:43.630Z,1478904583.630 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T22:49:47.539Z,1478904587.539 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:49:47.539Z,1478904587.539 [BPC1] No Fault, FailCount= 1
2016-11-11T22:50:16.728Z,1478904616.728 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:50:16.728Z,1478904616.728 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 26
2016-11-11T22:50:16.728Z,1478904616.728 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:50:16.744Z,1478904616.744 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:50:17.126Z,1478904617.126 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:50:17.126Z,1478904617.126 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 26
2016-11-11T22:50:17.528Z,1478904617.528 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:50:17.529Z,1478904617.529 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:50:17.529Z,1478904617.529 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:52:43.419Z,1478904763.419 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T22:52:43.419Z,1478904763.419 [Default:CheckIn:C.Wait] Stopped
2016-11-11T22:52:43.419Z,1478904763.419 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T22:52:43.420Z,1478904763.420 [Default:CheckIn:D] Running Loop=1
2016-11-11T22:52:43.836Z,1478904763.836 [Default:CheckIn:D] Stopped
2016-11-11T22:52:43.836Z,1478904763.836 [Default:CheckIn:E] Running Loop=1
2016-11-11T22:52:44.194Z,1478904764.194 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1082.708789 min 
2016-11-11T22:52:44.194Z,1478904764.194 [Default:CheckIn:E] Stopped
2016-11-11T22:52:44.194Z,1478904764.194 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T22:52:44.194Z,1478904764.194 [Default:CheckIn] Stopped
2016-11-11T22:52:44.194Z,1478904764.194 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T22:52:44.195Z,1478904764.195 [Default:CheckIn](INFO): Running loop #105
2016-11-11T22:52:44.195Z,1478904764.195 [Default:CheckIn] Running Loop=105
2016-11-11T22:52:44.195Z,1478904764.195 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T22:52:44.195Z,1478904764.195 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T22:52:47.983Z,1478904767.983 [NAL9602](INFO): Powering up
2016-11-11T22:52:57.436Z,1478904777.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:52:58.232Z,1478904778.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:52:59.005Z,1478904779.005 [NAL9602](INFO): NAL9602 initialized
2016-11-11T22:52:59.809Z,1478904779.809 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T22:52:59.809Z,1478904779.809 [NAL9602] Data Fault, FailCount= 3
2016-11-11T22:52:59.809Z,1478904779.809 [NAL9602](ERROR): Data Fault
2016-11-11T22:52:59.901Z,1478904779.901 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T22:53:00.204Z,1478904780.204 [NAL9602](INFO): Powering down
2016-11-11T22:53:01.095Z,1478904781.095 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T22:53:01.095Z,1478904781.095 [NAL9602] No Fault, FailCount= 3
2016-11-11T22:53:05.405Z,1478904785.405 [NAL9602](INFO): Powering up NAL9602
2016-11-11T22:53:16.613Z,1478904796.613 [NAL9602](INFO): NAL9602 initialized
2016-11-11T22:53:17.908Z,1478904797.908 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:53:17.908Z,1478904797.908 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 27
2016-11-11T22:53:17.908Z,1478904797.908 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:53:17.926Z,1478904797.926 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:53:18.310Z,1478904798.310 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:53:18.310Z,1478904798.310 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 27
2016-11-11T22:53:18.678Z,1478904798.678 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:53:18.678Z,1478904798.678 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:53:18.679Z,1478904798.679 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:55:01.657Z,1478904901.657 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T22:55:01.658Z,1478904901.658 [BPC1] Data Fault, FailCount= 1
2016-11-11T22:55:01.658Z,1478904901.658 [BPC1](ERROR): Data Fault
2016-11-11T22:55:01.739Z,1478904901.740 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T22:55:02.941Z,1478904902.941 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:55:02.941Z,1478904902.941 [BPC1] No Fault, FailCount= 1
2016-11-11T22:55:31.196Z,1478904931.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:55:31.992Z,1478904931.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T22:56:18.800Z,1478904978.800 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:56:18.800Z,1478904978.800 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 28
2016-11-11T22:56:18.800Z,1478904978.800 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:56:18.815Z,1478904978.815 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:56:19.174Z,1478904979.174 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:56:19.174Z,1478904979.174 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 28
2016-11-11T22:56:19.577Z,1478904979.577 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:56:19.577Z,1478904979.577 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:56:19.578Z,1478904979.578 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T22:56:22.804Z,1478904982.804 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T22:57:19.974Z,1478905039.974 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2016-11-11T22:57:27.963Z,1478905047.963 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-11T22:57:29.576Z,1478905049.576 [PNI_TCM](ERROR): CRC does not match. Expected:0x50887 got:0x52249
2016-11-11T22:57:30.379Z,1478905050.379 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T22:57:30.379Z,1478905050.379 [BPC1] Data Fault, FailCount= 1
2016-11-11T22:57:30.379Z,1478905050.379 [BPC1](ERROR): Data Fault
2016-11-11T22:57:30.409Z,1478905050.409 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T22:57:31.165Z,1478905051.165 [PNI_TCM](ERROR): CRC does not match. Expected:0x64623 got:0x210
2016-11-11T22:57:31.622Z,1478905051.622 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:57:31.622Z,1478905051.622 [BPC1] No Fault, FailCount= 1
2016-11-11T22:57:44.384Z,1478905064.384 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T22:52:44.2Z
2016-11-11T22:57:44.384Z,1478905064.384 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T22:57:44.384Z,1478905064.384 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T22:57:48.999Z,1478905068.999 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0420.lzma
2016-11-11T22:57:49.792Z,1478905069.792 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0420.lzma.bak
2016-11-11T22:57:49.793Z,1478905069.793 [DataOverHttps](INFO): SBD MOMSN=4555838
2016-11-11T22:58:00.155Z,1478905080.155 [DataOverHttps](INFO): Sending 421 bytes from file Logs/20161111T044527/Express0421.lzma
2016-11-11T22:58:00.946Z,1478905080.946 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0421.lzma.bak
2016-11-11T22:58:00.946Z,1478905080.946 [DataOverHttps](INFO): SBD MOMSN=4555840
2016-11-11T22:58:02.496Z,1478905082.496 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T22:58:02.496Z,1478905082.496 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T22:58:02.496Z,1478905082.496 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T22:58:20.173Z,1478905100.173 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T22:58:22.206Z,1478905102.206 [BPC1](ERROR): Failed to receive battery data
2016-11-11T22:58:22.206Z,1478905102.206 [BPC1] Communications Fault, FailCount= 1
2016-11-11T22:58:22.206Z,1478905102.206 [BPC1](ERROR): Communications Fault
2016-11-11T22:58:22.284Z,1478905102.284 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T22:58:23.456Z,1478905103.456 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T22:58:23.456Z,1478905103.456 [BPC1] No Fault, FailCount= 1
2016-11-11T22:58:25.780Z,1478905105.780 [NAL9602](INFO): Powering down
2016-11-11T22:58:54.206Z,1478905134.206 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-11T22:58:54.610Z,1478905134.611 [PNI_TCM](ERROR): CRC does not match. Expected:0x58832 got:0x16913
2016-11-11T22:59:02.203Z,1478905142.203 [PNI_TCM](ERROR): CRC does not match. Expected:0x8189 got:0x16279
2016-11-11T22:59:19.835Z,1478905159.835 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T22:59:19.835Z,1478905159.835 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 29
2016-11-11T22:59:19.835Z,1478905159.835 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T22:59:19.849Z,1478905159.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T22:59:20.288Z,1478905160.288 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T22:59:20.288Z,1478905160.288 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 29
2016-11-11T22:59:20.643Z,1478905160.643 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T22:59:20.644Z,1478905160.644 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T22:59:20.644Z,1478905160.644 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:00:45.192Z,1478905245.192 [BPC1](ERROR): Failed to parse message.
2016-11-11T23:00:45.193Z,1478905245.193 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T23:00:45.193Z,1478905245.193 [BPC1] Data Fault, FailCount= 1
2016-11-11T23:00:45.193Z,1478905245.193 [BPC1](ERROR): Data Fault
2016-11-11T23:00:45.247Z,1478905245.247 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T23:00:46.443Z,1478905246.443 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:00:46.443Z,1478905246.443 [BPC1] No Fault, FailCount= 1
2016-11-11T23:02:07.363Z,1478905327.363 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T23:02:07.363Z,1478905327.363 [BPC1] Data Fault, FailCount= 1
2016-11-11T23:02:07.363Z,1478905327.363 [BPC1](ERROR): Data Fault
2016-11-11T23:02:07.433Z,1478905327.433 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T23:02:08.616Z,1478905328.616 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:02:08.617Z,1478905328.616 [BPC1] No Fault, FailCount= 1
2016-11-11T23:02:20.988Z,1478905340.988 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:02:20.989Z,1478905340.989 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 30
2016-11-11T23:02:20.989Z,1478905340.989 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:02:21.015Z,1478905341.015 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:02:21.394Z,1478905341.394 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:02:21.394Z,1478905341.394 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 30
2016-11-11T23:02:21.840Z,1478905341.840 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:02:21.841Z,1478905341.841 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:02:21.841Z,1478905341.841 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:03:03.001Z,1478905383.001 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T23:03:03.001Z,1478905383.001 [Default:CheckIn:C.Wait] Stopped
2016-11-11T23:03:03.001Z,1478905383.001 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T23:03:03.002Z,1478905383.001 [Default:CheckIn:D] Running Loop=1
2016-11-11T23:03:03.386Z,1478905383.386 [Default:CheckIn:D] Stopped
2016-11-11T23:03:03.386Z,1478905383.386 [Default:CheckIn:E] Running Loop=1
2016-11-11T23:03:03.865Z,1478905383.865 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1093.034635 min 
2016-11-11T23:03:03.865Z,1478905383.865 [Default:CheckIn:E] Stopped
2016-11-11T23:03:03.865Z,1478905383.865 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T23:03:03.865Z,1478905383.865 [Default:CheckIn] Stopped
2016-11-11T23:03:03.865Z,1478905383.865 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T23:03:03.866Z,1478905383.866 [Default:CheckIn](INFO): Running loop #106
2016-11-11T23:03:03.866Z,1478905383.866 [Default:CheckIn] Running Loop=106
2016-11-11T23:03:03.866Z,1478905383.866 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T23:03:03.866Z,1478905383.866 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T23:03:07.341Z,1478905387.341 [NAL9602](INFO): Powering up
2016-11-11T23:03:18.145Z,1478905398.145 [NAL9602](INFO): NAL9602 initialized
2016-11-11T23:03:18.949Z,1478905398.949 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T23:03:18.949Z,1478905398.949 [NAL9602] Data Fault, FailCount= 4
2016-11-11T23:03:18.949Z,1478905398.949 [NAL9602](ERROR): Data Fault
2016-11-11T23:03:19.044Z,1478905399.044 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T23:03:19.357Z,1478905399.357 [NAL9602](INFO): Powering down
2016-11-11T23:03:20.274Z,1478905400.274 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T23:03:20.275Z,1478905400.274 [NAL9602] No Fault, FailCount= 4
2016-11-11T23:03:24.541Z,1478905404.541 [NAL9602](INFO): Powering up NAL9602
2016-11-11T23:03:26.440Z,1478905406.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:03:27.236Z,1478905407.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:03:34.169Z,1478905414.169 [PNI_TCM](ERROR): CRC does not match. Expected:0x60058 got:0x59419
2016-11-11T23:03:35.341Z,1478905415.341 [NAL9602](INFO): NAL9602 initialized
2016-11-11T23:03:35.779Z,1478905415.779 [PNI_TCM](ERROR): CRC does not match. Expected:0x40752 got:0x54175
2016-11-11T23:03:38.578Z,1478905418.579 [PNI_TCM](ERROR): CRC does not match. Expected:0x17711 got:0x16384
2016-11-11T23:03:40.166Z,1478905420.166 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2016-11-11T23:05:21.202Z,1478905521.202 [PNI_TCM](ERROR): CRC does not match. Expected:0x23342 got:0x6335
2016-11-11T23:05:22.049Z,1478905522.049 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:05:22.049Z,1478905522.049 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 31
2016-11-11T23:05:22.049Z,1478905522.049 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:05:22.064Z,1478905522.064 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:05:22.462Z,1478905522.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:05:22.462Z,1478905522.462 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 31
2016-11-11T23:05:22.828Z,1478905522.828 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:05:22.829Z,1478905522.829 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:05:22.829Z,1478905522.829 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:05:24.006Z,1478905524.006 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-11T23:05:27.214Z,1478905527.214 [PNI_TCM](ERROR): CRC does not match. Expected:0x6818 got:0x48776
2016-11-11T23:05:28.805Z,1478905528.805 [PNI_TCM](ERROR): CRC does not match. Expected:0x53293 got:0x4445
2016-11-11T23:05:32.001Z,1478905532.001 [PNI_TCM](ERROR): CRC does not match. Expected:0x26001 got:0x16876
2016-11-11T23:06:00.196Z,1478905560.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:06:00.992Z,1478905560.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:06:14.172Z,1478905574.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:06:14.968Z,1478905574.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:06:22.970Z,1478905582.970 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T23:08:04.105Z,1478905684.105 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T23:03:03.9Z
2016-11-11T23:08:04.105Z,1478905684.105 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T23:08:04.105Z,1478905684.105 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T23:08:07.671Z,1478905687.671 [BPC1](ERROR): Failed to receive battery data
2016-11-11T23:08:07.671Z,1478905687.671 [BPC1] Communications Fault, FailCount= 1
2016-11-11T23:08:07.671Z,1478905687.671 [BPC1](ERROR): Communications Fault
2016-11-11T23:08:07.747Z,1478905687.747 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T23:08:08.442Z,1478905688.442 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0424.lzma
2016-11-11T23:08:08.962Z,1478905688.962 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0424.lzma.bak
2016-11-11T23:08:08.962Z,1478905688.962 [DataOverHttps](INFO): SBD MOMSN=4555847
2016-11-11T23:08:09.078Z,1478905689.078 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:08:09.078Z,1478905689.078 [BPC1] No Fault, FailCount= 1
2016-11-11T23:08:19.280Z,1478905699.280 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20161111T044527/Express0425.lzma
2016-11-11T23:08:20.082Z,1478905700.082 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0425.lzma.bak
2016-11-11T23:08:20.082Z,1478905700.082 [DataOverHttps](INFO): SBD MOMSN=4555849
2016-11-11T23:08:21.527Z,1478905701.527 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T23:08:21.528Z,1478905701.528 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T23:08:21.528Z,1478905701.528 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T23:08:25.227Z,1478905705.227 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:08:25.227Z,1478905705.227 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 32
2016-11-11T23:08:25.227Z,1478905705.227 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:08:25.250Z,1478905705.250 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:08:25.361Z,1478905705.362 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:08:25.362Z,1478905705.362 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 32
2016-11-11T23:08:25.764Z,1478905705.764 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:08:25.765Z,1478905705.765 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:08:25.765Z,1478905705.765 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:08:27.700Z,1478905707.700 [PNI_TCM](ERROR): CRC does not match. Expected:0x47275 got:0x6335
2016-11-11T23:08:28.110Z,1478905708.110 [PNI_TCM](ERROR): CRC does not match. Expected:0x47998 got:0x6978
2016-11-11T23:08:30.094Z,1478905710.094 [PNI_TCM](ERROR): CRC does not match. Expected:0x11870 got:0x30
2016-11-11T23:08:35.703Z,1478905715.703 [PNI_TCM](ERROR): CRC does not match. Expected:0x26136 got:0x49579
2016-11-11T23:08:38.877Z,1478905718.877 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T23:08:38.905Z,1478905718.905 [PNI_TCM](ERROR): CRC does not match. Expected:0x18547 got:0x7490
2016-11-11T23:08:44.468Z,1478905724.468 [NAL9602](INFO): Powering down
2016-11-11T23:08:56.095Z,1478905736.095 [BPC1](ERROR): Failed to receive battery data
2016-11-11T23:08:56.095Z,1478905736.095 [BPC1] Communications Fault, FailCount= 1
2016-11-11T23:08:56.095Z,1478905736.095 [BPC1](ERROR): Communications Fault
2016-11-11T23:08:56.162Z,1478905736.162 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T23:08:57.370Z,1478905737.369 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:08:57.370Z,1478905737.370 [BPC1] No Fault, FailCount= 1
2016-11-11T23:10:35.216Z,1478905835.216 [BPC1](ERROR): Failed to receive battery data
2016-11-11T23:10:35.216Z,1478905835.216 [BPC1] Communications Fault, FailCount= 1
2016-11-11T23:10:35.216Z,1478905835.217 [BPC1](ERROR): Communications Fault
2016-11-11T23:10:35.271Z,1478905835.271 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T23:10:36.539Z,1478905836.539 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:10:36.539Z,1478905836.539 [BPC1] No Fault, FailCount= 1
2016-11-11T23:11:21.684Z,1478905881.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:11:22.480Z,1478905882.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:11:25.909Z,1478905885.908 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:11:25.909Z,1478905885.909 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 33
2016-11-11T23:11:25.909Z,1478905885.909 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:11:25.923Z,1478905885.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:11:26.086Z,1478905886.086 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:11:26.086Z,1478905886.086 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 33
2016-11-11T23:11:26.482Z,1478905886.482 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:11:26.483Z,1478905886.483 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:11:26.483Z,1478905886.483 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:11:35.660Z,1478905895.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:11:36.456Z,1478905896.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:13:21.853Z,1478906001.853 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T23:13:21.853Z,1478906001.853 [Default:CheckIn:C.Wait] Stopped
2016-11-11T23:13:21.853Z,1478906001.853 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T23:13:21.854Z,1478906001.853 [Default:CheckIn:D] Running Loop=1
2016-11-11T23:13:22.289Z,1478906002.289 [Default:CheckIn:D] Stopped
2016-11-11T23:13:22.289Z,1478906002.289 [Default:CheckIn:E] Running Loop=1
2016-11-11T23:13:22.661Z,1478906002.661 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1103.349609 min 
2016-11-11T23:13:22.661Z,1478906002.661 [Default:CheckIn:E] Stopped
2016-11-11T23:13:22.661Z,1478906002.661 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T23:13:22.661Z,1478906002.661 [Default:CheckIn] Stopped
2016-11-11T23:13:22.661Z,1478906002.661 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T23:13:22.662Z,1478906002.662 [Default:CheckIn](INFO): Running loop #107
2016-11-11T23:13:22.662Z,1478906002.662 [Default:CheckIn] Running Loop=107
2016-11-11T23:13:22.662Z,1478906002.662 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T23:13:22.662Z,1478906002.662 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T23:13:26.526Z,1478906006.526 [NAL9602](INFO): Powering up
2016-11-11T23:13:37.477Z,1478906017.477 [NAL9602](INFO): NAL9602 initialized
2016-11-11T23:13:38.285Z,1478906018.285 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T23:13:38.285Z,1478906018.285 [NAL9602] Data Fault, FailCount= 5
2016-11-11T23:13:38.285Z,1478906018.285 [NAL9602](ERROR): Data Fault
2016-11-11T23:13:38.383Z,1478906018.383 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T23:13:38.387Z,1478906018.387 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-11-11T23:13:38.677Z,1478906018.677 [NAL9602](INFO): Powering down
2016-11-11T23:13:55.448Z,1478906035.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:13:56.244Z,1478906036.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:14:26.680Z,1478906066.680 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:14:26.681Z,1478906066.681 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 34
2016-11-11T23:14:26.681Z,1478906066.681 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:14:26.710Z,1478906066.710 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:14:26.817Z,1478906066.817 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:14:26.817Z,1478906066.818 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 34
2016-11-11T23:14:27.205Z,1478906067.205 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:14:27.205Z,1478906067.205 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:14:27.206Z,1478906067.206 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:14:33.566Z,1478906073.566 [PNI_TCM](ERROR): CRC does not match. Expected:0x10535 got:0x16876
2016-11-11T23:15:38.591Z,1478906138.591 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T23:15:38.591Z,1478906138.591 [NAL9602] No Fault, FailCount= 5
2016-11-11T23:15:38.902Z,1478906138.902 [NAL9602](INFO): Powering up NAL9602
2016-11-11T23:15:49.697Z,1478906149.697 [NAL9602](INFO): NAL9602 initialized
2016-11-11T23:16:22.994Z,1478906182.994 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T23:16:29.224Z,1478906189.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:16:30.022Z,1478906190.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:16:36.549Z,1478906196.549 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2016-11-11T23:16:41.349Z,1478906201.349 [PNI_TCM](ERROR): CRC does not match. Expected:0x53787 got:0x43033
2016-11-11T23:16:42.970Z,1478906202.970 [PNI_TCM](ERROR): CRC does not match. Expected:0x13704 got:0x53
2016-11-11T23:16:44.541Z,1478906204.541 [PNI_TCM](ERROR): CRC does not match. Expected:0x7054 got:0x29694
2016-11-11T23:16:46.156Z,1478906206.156 [PNI_TCM](ERROR): CRC does not match. Expected:0x15605 got:0x4445
2016-11-11T23:17:27.414Z,1478906247.414 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:17:27.414Z,1478906247.414 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 35
2016-11-11T23:17:27.414Z,1478906247.414 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:17:27.440Z,1478906247.441 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:17:27.794Z,1478906247.794 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:17:27.794Z,1478906247.794 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 35
2016-11-11T23:17:28.197Z,1478906248.197 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:17:28.198Z,1478906248.198 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:17:28.198Z,1478906248.198 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:18:23.011Z,1478906303.011 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T23:13:22.7Z
2016-11-11T23:18:23.011Z,1478906303.011 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T23:18:23.011Z,1478906303.011 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T23:18:27.479Z,1478906307.479 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20161111T044527/Courier0428.lzma
2016-11-11T23:18:28.282Z,1478906308.282 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0428.lzma.bak
2016-11-11T23:18:28.282Z,1478906308.282 [DataOverHttps](INFO): SBD MOMSN=4555854
2016-11-11T23:18:38.592Z,1478906318.592 [DataOverHttps](INFO): Sending 235 bytes from file Logs/20161111T044527/Express0429.lzma
2016-11-11T23:18:39.390Z,1478906319.390 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0429.lzma.bak
2016-11-11T23:18:39.390Z,1478906319.390 [DataOverHttps](INFO): SBD MOMSN=4555857
2016-11-11T23:18:40.746Z,1478906320.746 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T23:18:40.746Z,1478906320.746 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T23:18:40.746Z,1478906320.746 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T23:19:02.176Z,1478906342.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:19:02.972Z,1478906342.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:20:19.359Z,1478906419.359 [BPC1](ERROR): Failed to receive battery data
2016-11-11T23:20:19.359Z,1478906419.359 [BPC1] Communications Fault, FailCount= 1
2016-11-11T23:20:19.359Z,1478906419.359 [BPC1](ERROR): Communications Fault
2016-11-11T23:20:19.423Z,1478906419.423 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T23:20:20.582Z,1478906420.582 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:20:20.582Z,1478906420.582 [BPC1] No Fault, FailCount= 1
2016-11-11T23:20:28.632Z,1478906428.632 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:20:28.633Z,1478906428.633 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 36
2016-11-11T23:20:28.633Z,1478906428.633 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:20:28.662Z,1478906428.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:20:29.017Z,1478906429.017 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:20:29.017Z,1478906429.017 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 36
2016-11-11T23:20:29.389Z,1478906429.389 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:20:29.390Z,1478906429.390 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:20:29.390Z,1478906429.390 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:20:36.946Z,1478906436.946 [PNI_TCM](ERROR): CRC does not match. Expected:0x35453 got:0x16913
2016-11-11T23:20:53.077Z,1478906453.077 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T23:20:58.680Z,1478906458.680 [NAL9602](INFO): Powering down
2016-11-11T23:21:50.684Z,1478906510.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:21:51.481Z,1478906511.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:22:18.660Z,1478906538.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:22:19.456Z,1478906539.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:23:29.798Z,1478906609.798 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:23:29.799Z,1478906609.799 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 37
2016-11-11T23:23:29.799Z,1478906609.799 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:23:29.829Z,1478906609.829 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:23:30.189Z,1478906610.189 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:23:30.189Z,1478906610.189 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 37
2016-11-11T23:23:30.524Z,1478906610.524 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:23:30.524Z,1478906610.524 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:23:30.525Z,1478906610.524 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:23:40.950Z,1478906620.950 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T23:23:40.950Z,1478906620.950 [Default:CheckIn:C.Wait] Stopped
2016-11-11T23:23:40.950Z,1478906620.950 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T23:23:40.950Z,1478906620.950 [Default:CheckIn:D] Running Loop=1
2016-11-11T23:23:41.402Z,1478906621.402 [Default:CheckIn:D] Stopped
2016-11-11T23:23:41.402Z,1478906621.402 [Default:CheckIn:E] Running Loop=1
2016-11-11T23:23:41.724Z,1478906621.724 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1113.668229 min 
2016-11-11T23:23:41.725Z,1478906621.725 [Default:CheckIn:E] Stopped
2016-11-11T23:23:41.725Z,1478906621.725 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T23:23:41.725Z,1478906621.725 [Default:CheckIn] Stopped
2016-11-11T23:23:41.725Z,1478906621.725 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T23:23:41.725Z,1478906621.725 [Default:CheckIn](INFO): Running loop #108
2016-11-11T23:23:41.725Z,1478906621.725 [Default:CheckIn] Running Loop=108
2016-11-11T23:23:41.725Z,1478906621.725 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T23:23:41.726Z,1478906621.726 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T23:23:45.419Z,1478906625.419 [NAL9602](INFO): Powering up
2016-11-11T23:23:56.325Z,1478906636.325 [NAL9602](INFO): NAL9602 initialized
2016-11-11T23:24:24.444Z,1478906664.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:24:25.240Z,1478906665.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:24:28.325Z,1478906668.325 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-11T23:24:28.399Z,1478906668.399 [NAL9602](FAULT): received: 
+CSQ:0

OK4, 2, 0, 0, 0

OK
2016-11-11T23:24:28.399Z,1478906668.399 [NAL9602] Data Fault, FailCount= 1
2016-11-11T23:24:28.399Z,1478906668.399 [NAL9602](ERROR): Data Fault
2016-11-11T23:24:28.509Z,1478906668.509 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T23:24:28.724Z,1478906668.724 [NAL9602](INFO): Powering down
2016-11-11T23:24:29.619Z,1478906669.619 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T23:24:29.619Z,1478906669.619 [NAL9602] No Fault, FailCount= 1
2016-11-11T23:24:33.925Z,1478906673.925 [NAL9602](INFO): Powering up NAL9602
2016-11-11T23:24:46.326Z,1478906686.326 [NAL9602](INFO): NAL9602 initialized
2016-11-11T23:26:23.116Z,1478906783.116 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T23:26:30.682Z,1478906790.682 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:26:30.682Z,1478906790.682 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 38
2016-11-11T23:26:30.682Z,1478906790.682 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:26:30.713Z,1478906790.713 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:26:31.108Z,1478906791.108 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:26:31.108Z,1478906791.108 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 38
2016-11-11T23:26:31.501Z,1478906791.501 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:26:31.502Z,1478906791.502 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:26:31.502Z,1478906791.502 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:26:55.502Z,1478906815.502 [NAL9602](INFO): SBD MO Status=0, MOMSN=364, MT Status=0, MTMSN=0
2016-11-11T23:26:55.502Z,1478906815.502 [NAL9602](INFO): No messages in MT queue
2016-11-11T23:26:56.301Z,1478906816.301 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T23:26:56.301Z,1478906816.301 [NAL9602] Data Fault, FailCount= 1
2016-11-11T23:26:56.301Z,1478906816.301 [NAL9602](ERROR): Data Fault
2016-11-11T23:26:56.405Z,1478906816.405 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T23:26:56.697Z,1478906816.697 [NAL9602](INFO): Powering down
2016-11-11T23:26:57.587Z,1478906817.588 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T23:26:57.588Z,1478906817.588 [NAL9602] No Fault, FailCount= 1
2016-11-11T23:27:01.901Z,1478906821.901 [NAL9602](INFO): Powering up NAL9602
2016-11-11T23:27:12.184Z,1478906832.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:27:12.980Z,1478906832.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:27:13.101Z,1478906833.101 [NAL9602](INFO): NAL9602 initialized
2016-11-11T23:27:21.140Z,1478906841.140 [PNI_TCM](ERROR): CRC does not match. Expected:0x21990 got:0x45340
2016-11-11T23:27:31.536Z,1478906851.536 [BPC1](ERROR): Failed to receive battery data
2016-11-11T23:27:31.536Z,1478906851.536 [BPC1] Communications Fault, FailCount= 1
2016-11-11T23:27:31.536Z,1478906851.536 [BPC1](ERROR): Communications Fault
2016-11-11T23:27:31.591Z,1478906851.591 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T23:27:32.790Z,1478906852.790 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:27:32.790Z,1478906852.790 [BPC1] No Fault, FailCount= 1
2016-11-11T23:28:19.503Z,1478906899.503 [BPC1](ERROR): Failed to receive battery data
2016-11-11T23:28:19.503Z,1478906899.503 [BPC1] Communications Fault, FailCount= 1
2016-11-11T23:28:19.503Z,1478906899.503 [BPC1](ERROR): Communications Fault
2016-11-11T23:28:19.570Z,1478906899.570 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T23:28:20.775Z,1478906900.774 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:28:20.775Z,1478906900.775 [BPC1] No Fault, FailCount= 1
2016-11-11T23:28:41.939Z,1478906921.939 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T23:23:41.7Z
2016-11-11T23:28:41.939Z,1478906921.940 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T23:28:41.940Z,1478906921.940 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T23:28:46.905Z,1478906926.905 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0432.lzma
2016-11-11T23:28:47.698Z,1478906927.698 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0432.lzma.bak
2016-11-11T23:28:47.698Z,1478906927.698 [DataOverHttps](INFO): SBD MOMSN=4555863
2016-11-11T23:28:49.212Z,1478906929.212 [NAL9602](INFO): Powering down
2016-11-11T23:28:57.883Z,1478906937.883 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20161111T044527/Express0433.lzma
2016-11-11T23:28:58.666Z,1478906938.666 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0433.lzma.bak
2016-11-11T23:28:58.666Z,1478906938.666 [DataOverHttps](INFO): SBD MOMSN=4555865
2016-11-11T23:29:00.016Z,1478906940.016 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T23:29:00.016Z,1478906940.016 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T23:29:00.016Z,1478906940.016 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T23:29:24.929Z,1478906964.929 [PNI_TCM](ERROR): CRC does not match. Expected:0x29641 got:0x22968
2016-11-11T23:29:28.126Z,1478906968.126 [PNI_TCM](ERROR): CRC does not match. Expected:0x1454 got:0x16877
2016-11-11T23:29:31.770Z,1478906971.770 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:29:31.770Z,1478906971.770 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 39
2016-11-11T23:29:31.770Z,1478906971.770 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:29:31.814Z,1478906971.814 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:29:32.172Z,1478906972.172 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:29:32.172Z,1478906972.172 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 39
2016-11-11T23:29:32.553Z,1478906972.553 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:29:32.553Z,1478906972.553 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:29:32.554Z,1478906972.554 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:29:32.929Z,1478906972.929 [PNI_TCM](ERROR): CRC does not match. Expected:0x48350 got:0x26119
2016-11-11T23:29:45.916Z,1478906985.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:29:46.712Z,1478906986.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:31:12.354Z,1478907072.354 [PNI_TCM](ERROR): CRC does not match. Expected:0x11485 got:0x43840
2016-11-11T23:31:15.162Z,1478907075.162 [PNI_TCM](ERROR): CRC does not match. Expected:0x51465 got:0x43955
2016-11-11T23:31:19.953Z,1478907079.953 [PNI_TCM](ERROR): CRC does not match. Expected:0x14711 got:0x7361
2016-11-11T23:32:32.786Z,1478907152.786 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:32:32.786Z,1478907152.786 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 40
2016-11-11T23:32:32.787Z,1478907152.787 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:32:32.801Z,1478907152.801 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:32:33.238Z,1478907153.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:32:33.238Z,1478907153.238 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 40
2016-11-11T23:32:33.609Z,1478907153.609 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:32:33.610Z,1478907153.610 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:32:33.610Z,1478907153.610 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:32:33.672Z,1478907153.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:32:34.468Z,1478907154.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:32:47.652Z,1478907167.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:32:48.448Z,1478907168.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:34:00.343Z,1478907240.343 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T23:34:00.344Z,1478907240.344 [Default:CheckIn:C.Wait] Stopped
2016-11-11T23:34:00.344Z,1478907240.344 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T23:34:00.344Z,1478907240.344 [Default:CheckIn:D] Running Loop=1
2016-11-11T23:34:00.811Z,1478907240.810 [Default:CheckIn:D] Stopped
2016-11-11T23:34:00.811Z,1478907240.810 [Default:CheckIn:E] Running Loop=1
2016-11-11T23:34:01.208Z,1478907241.208 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1123.991667 min 
2016-11-11T23:34:01.208Z,1478907241.208 [Default:CheckIn:E] Stopped
2016-11-11T23:34:01.209Z,1478907241.209 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T23:34:01.209Z,1478907241.209 [Default:CheckIn] Stopped
2016-11-11T23:34:01.209Z,1478907241.209 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T23:34:01.209Z,1478907241.209 [Default:CheckIn](INFO): Running loop #109
2016-11-11T23:34:01.209Z,1478907241.209 [Default:CheckIn] Running Loop=109
2016-11-11T23:34:01.209Z,1478907241.209 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T23:34:01.209Z,1478907241.210 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T23:34:04.935Z,1478907244.935 [NAL9602](INFO): Powering up
2016-11-11T23:34:15.880Z,1478907255.880 [NAL9602](INFO): NAL9602 initialized
2016-11-11T23:35:06.652Z,1478907306.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:35:07.448Z,1478907307.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:35:32.363Z,1478907332.363 [PNI_TCM](ERROR): CRC does not match. Expected:0x19393 got:0x6978
2016-11-11T23:35:33.627Z,1478907333.627 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:35:33.627Z,1478907333.627 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 41
2016-11-11T23:35:33.627Z,1478907333.627 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:35:33.641Z,1478907333.641 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:35:34.009Z,1478907334.009 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:35:34.009Z,1478907334.009 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 41
2016-11-11T23:35:34.401Z,1478907334.401 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:35:34.401Z,1478907334.401 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:35:34.402Z,1478907334.402 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:35:35.553Z,1478907335.553 [PNI_TCM](ERROR): CRC does not match. Expected:0x2601 got:0x61724
2016-11-11T23:35:38.749Z,1478907338.749 [PNI_TCM](ERROR): CRC does not match. Expected:0x59637 got:0x43918
2016-11-11T23:35:40.352Z,1478907340.352 [PNI_TCM](ERROR): CRC does not match. Expected:0x7028 got:0x60864
2016-11-11T23:36:23.497Z,1478907383.497 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T23:36:49.006Z,1478907409.006 [NAL9602](INFO): SBD MO Status=2, MOMSN=365, MT Status=2, MTMSN=0
2016-11-11T23:36:49.007Z,1478907409.007 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T23:36:51.032Z,1478907411.032 [PNI_TCM](ERROR): CRC does not match. Expected:0x36420 got:0x1857
2016-11-11T23:36:55.820Z,1478907415.820 [PNI_TCM](ERROR): CRC does not match. Expected:0x13835 got:0x4449
2016-11-11T23:37:01.837Z,1478907421.837 [PNI_TCM](ERROR): CRC does not match. Expected:0x59320 got:0x46105
2016-11-11T23:37:16.506Z,1478907436.506 [NAL9602](INFO): SBD MO Status=0, MOMSN=365, MT Status=0, MTMSN=0
2016-11-11T23:37:16.506Z,1478907436.506 [NAL9602](INFO): No messages in MT queue
2016-11-11T23:37:17.305Z,1478907437.305 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T23:37:17.305Z,1478907437.305 [NAL9602] Data Fault, FailCount= 1
2016-11-11T23:37:17.305Z,1478907437.305 [NAL9602](ERROR): Data Fault
2016-11-11T23:37:17.422Z,1478907437.422 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T23:37:17.713Z,1478907437.713 [NAL9602](INFO): Powering down
2016-11-11T23:37:18.634Z,1478907438.634 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T23:37:18.634Z,1478907438.634 [NAL9602] No Fault, FailCount= 1
2016-11-11T23:37:22.905Z,1478907442.905 [NAL9602](INFO): Powering up NAL9602
2016-11-11T23:37:34.105Z,1478907454.105 [NAL9602](INFO): NAL9602 initialized
2016-11-11T23:37:51.354Z,1478907471.354 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2016-11-11T23:37:52.940Z,1478907472.940 [PNI_TCM](ERROR): CRC does not match. Expected:0x15386 got:0x64806
2016-11-11T23:37:55.164Z,1478907475.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:37:55.961Z,1478907475.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:37:59.351Z,1478907479.351 [PNI_TCM](ERROR): CRC does not match. Expected:0x62552 got:0x14855
2016-11-11T23:38:34.651Z,1478907514.651 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:38:34.652Z,1478907514.652 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 42
2016-11-11T23:38:34.652Z,1478907514.652 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:38:34.679Z,1478907514.680 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:38:35.079Z,1478907515.079 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:38:35.079Z,1478907515.079 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 42
2016-11-11T23:38:35.434Z,1478907515.434 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:38:35.434Z,1478907515.434 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:38:35.435Z,1478907515.435 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:39:01.445Z,1478907541.445 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T23:34:01.2Z
2016-11-11T23:39:01.445Z,1478907541.445 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T23:39:01.445Z,1478907541.445 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T23:39:06.339Z,1478907546.339 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0436.lzma
2016-11-11T23:39:07.130Z,1478907547.130 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0436.lzma.bak
2016-11-11T23:39:07.130Z,1478907547.130 [DataOverHttps](INFO): SBD MOMSN=4555872
2016-11-11T23:39:07.141Z,1478907547.141 [NAL9602](INFO): Powering down
2016-11-11T23:39:17.489Z,1478907557.489 [DataOverHttps](INFO): Sending 185 bytes from file Logs/20161111T044527/Express0437.lzma
2016-11-11T23:39:18.278Z,1478907558.278 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0437.lzma.bak
2016-11-11T23:39:18.278Z,1478907558.278 [DataOverHttps](INFO): SBD MOMSN=4555874
2016-11-11T23:39:19.626Z,1478907559.626 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T23:39:19.626Z,1478907559.626 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T23:39:19.626Z,1478907559.626 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T23:40:23.692Z,1478907623.692 [BPC1](ERROR): Failed to receive battery data
2016-11-11T23:40:23.692Z,1478907623.692 [BPC1] Communications Fault, FailCount= 1
2016-11-11T23:40:23.692Z,1478907623.692 [BPC1](ERROR): Communications Fault
2016-11-11T23:40:23.751Z,1478907623.751 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T23:40:24.658Z,1478907624.658 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:40:24.658Z,1478907624.658 [BPC1] No Fault, FailCount= 1
2016-11-11T23:41:20.606Z,1478907680.606 [PNI_TCM](ERROR): CRC does not match. Expected:0x34770 got:0x8985
2016-11-11T23:41:35.603Z,1478907695.603 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:41:35.603Z,1478907695.603 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 43
2016-11-11T23:41:35.607Z,1478907695.607 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:41:35.634Z,1478907695.634 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:41:35.979Z,1478907695.979 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:41:35.979Z,1478907695.980 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 43
2016-11-11T23:41:36.356Z,1478907696.356 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:41:36.357Z,1478907696.357 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:41:36.357Z,1478907696.357 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:42:26.098Z,1478907746.098 [PNI_TCM](ERROR): CRC does not match. Expected:0x60703 got:0x9223
2016-11-11T23:42:30.889Z,1478907750.889 [PNI_TCM](ERROR): CRC does not match. Expected:0x43250 got:0x23125
2016-11-11T23:42:34.090Z,1478907754.089 [PNI_TCM](ERROR): CRC does not match. Expected:0x51623 got:0x16877
2016-11-11T23:42:52.089Z,1478907772.089 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T23:42:52.089Z,1478907772.089 [BPC1] Data Fault, FailCount= 1
2016-11-11T23:42:52.089Z,1478907772.089 [BPC1](ERROR): Data Fault
2016-11-11T23:42:52.160Z,1478907772.159 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T23:42:53.414Z,1478907773.414 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:42:53.414Z,1478907773.414 [BPC1] No Fault, FailCount= 1
2016-11-11T23:43:16.640Z,1478907796.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:43:17.436Z,1478907797.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:44:20.045Z,1478907860.045 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T23:44:20.045Z,1478907860.045 [Default:CheckIn:C.Wait] Stopped
2016-11-11T23:44:20.045Z,1478907860.046 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T23:44:20.046Z,1478907860.046 [Default:CheckIn:D] Running Loop=1
2016-11-11T23:44:20.452Z,1478907860.452 [Default:CheckIn:D] Stopped
2016-11-11T23:44:20.452Z,1478907860.452 [Default:CheckIn:E] Running Loop=1
2016-11-11T23:44:20.850Z,1478907860.850 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1134.319010 min 
2016-11-11T23:44:20.850Z,1478907860.851 [Default:CheckIn:E] Stopped
2016-11-11T23:44:20.851Z,1478907860.851 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T23:44:20.851Z,1478907860.851 [Default:CheckIn] Stopped
2016-11-11T23:44:20.851Z,1478907860.851 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T23:44:20.851Z,1478907860.851 [Default:CheckIn](INFO): Running loop #110
2016-11-11T23:44:20.851Z,1478907860.851 [Default:CheckIn] Running Loop=110
2016-11-11T23:44:20.852Z,1478907860.852 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T23:44:20.852Z,1478907860.852 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T23:44:24.556Z,1478907864.556 [NAL9602](INFO): Powering up
2016-11-11T23:44:35.517Z,1478907875.517 [NAL9602](INFO): NAL9602 initialized
2016-11-11T23:44:36.389Z,1478907876.389 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:44:36.389Z,1478907876.389 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 44
2016-11-11T23:44:36.390Z,1478907876.390 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:44:36.428Z,1478907876.428 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:44:36.796Z,1478907876.796 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:44:36.796Z,1478907876.796 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 44
2016-11-11T23:44:37.242Z,1478907877.241 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:44:37.242Z,1478907877.242 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:44:37.242Z,1478907877.242 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:45:21.559Z,1478907921.559 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T23:45:21.559Z,1478907921.559 [BPC1] Data Fault, FailCount= 1
2016-11-11T23:45:21.559Z,1478907921.559 [BPC1](ERROR): Data Fault
2016-11-11T23:45:21.618Z,1478907921.618 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T23:45:25.447Z,1478907925.447 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:45:25.447Z,1478907925.447 [BPC1] No Fault, FailCount= 1
2016-11-11T23:45:37.800Z,1478907937.800 [PNI_TCM](ERROR): CRC does not match. Expected:0x13746 got:0x16961
2016-11-11T23:45:44.192Z,1478907944.192 [PNI_TCM](ERROR): CRC does not match. Expected:0x789 got:0x9501
2016-11-11T23:45:48.988Z,1478907948.989 [PNI_TCM](ERROR): CRC does not match. Expected:0x49492 got:0x64511
2016-11-11T23:45:50.416Z,1478907950.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:45:51.212Z,1478907951.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:46:25.345Z,1478907985.345 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T23:46:55.381Z,1478908015.381 [BPC1](ERROR): Failed to receive battery data
2016-11-11T23:46:55.382Z,1478908015.382 [BPC1] Communications Fault, FailCount= 1
2016-11-11T23:46:55.382Z,1478908015.382 [BPC1](ERROR): Communications Fault
2016-11-11T23:46:55.449Z,1478908015.448 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T23:46:56.643Z,1478908016.643 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:46:56.643Z,1478908016.644 [BPC1] No Fault, FailCount= 1
2016-11-11T23:47:29.471Z,1478908049.471 [BPC1](ERROR): Failed to receive battery data
2016-11-11T23:47:29.471Z,1478908049.471 [BPC1] Communications Fault, FailCount= 1
2016-11-11T23:47:29.479Z,1478908049.479 [BPC1](ERROR): Communications Fault
2016-11-11T23:47:29.550Z,1478908049.550 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T23:47:30.683Z,1478908050.683 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:47:30.683Z,1478908050.684 [BPC1] No Fault, FailCount= 1
2016-11-11T23:47:37.394Z,1478908057.394 [NAL9602](INFO): SBD MO Status=2, MOMSN=366, MT Status=2, MTMSN=0
2016-11-11T23:47:37.394Z,1478908057.394 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T23:47:37.454Z,1478908057.454 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:47:37.454Z,1478908057.454 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 45
2016-11-11T23:47:37.454Z,1478908057.454 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:47:37.488Z,1478908057.489 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:47:37.859Z,1478908057.859 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:47:37.859Z,1478908057.859 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 45
2016-11-11T23:47:38.249Z,1478908058.249 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:47:38.249Z,1478908058.249 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:47:38.250Z,1478908058.250 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:48:04.190Z,1478908084.190 [NAL9602](INFO): SBD MO Status=2, MOMSN=366, MT Status=2, MTMSN=0
2016-11-11T23:48:04.190Z,1478908084.190 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-11T23:48:11.021Z,1478908091.021 [BPC1](ERROR): Failed to parse message.
2016-11-11T23:48:11.021Z,1478908091.021 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-11T23:48:11.021Z,1478908091.021 [BPC1] Data Fault, FailCount= 1
2016-11-11T23:48:11.021Z,1478908091.021 [BPC1](ERROR): Data Fault
2016-11-11T23:48:11.104Z,1478908091.104 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T23:48:12.283Z,1478908092.283 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:48:12.283Z,1478908092.283 [BPC1] No Fault, FailCount= 1
2016-11-11T23:48:24.164Z,1478908104.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:48:24.961Z,1478908104.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:48:38.144Z,1478908118.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:48:38.940Z,1478908118.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:49:20.868Z,1478908160.868 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T23:44:20.9Z
2016-11-11T23:49:20.868Z,1478908160.868 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T23:49:20.869Z,1478908160.869 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T23:49:26.096Z,1478908166.096 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0440.lzma
2016-11-11T23:49:26.806Z,1478908166.806 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0440.lzma.bak
2016-11-11T23:49:26.807Z,1478908166.807 [DataOverHttps](INFO): SBD MOMSN=4555878
2016-11-11T23:49:31.654Z,1478908171.654 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T23:49:31.654Z,1478908171.654 [BPC1] Data Fault, FailCount= 1
2016-11-11T23:49:31.654Z,1478908171.654 [BPC1](ERROR): Data Fault
2016-11-11T23:49:31.715Z,1478908171.715 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T23:49:32.647Z,1478908172.647 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:49:32.647Z,1478908172.648 [BPC1] No Fault, FailCount= 1
2016-11-11T23:49:36.819Z,1478908176.819 [DataOverHttps](INFO): Sending 123 bytes from file Logs/20161111T044527/Express0441.lzma
2016-11-11T23:49:37.610Z,1478908177.610 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0441.lzma.bak
2016-11-11T23:49:37.610Z,1478908177.610 [DataOverHttps](INFO): SBD MOMSN=4555880
2016-11-11T23:49:38.964Z,1478908178.964 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-11T23:49:39.041Z,1478908179.041 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T23:49:39.041Z,1478908179.041 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T23:49:39.041Z,1478908179.041 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-11T23:49:44.292Z,1478908184.293 [NAL9602](INFO): Powering down
2016-11-11T23:50:38.359Z,1478908238.359 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:50:38.359Z,1478908238.359 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 46
2016-11-11T23:50:38.359Z,1478908238.359 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:50:38.373Z,1478908238.373 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:50:38.783Z,1478908238.783 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:50:38.784Z,1478908238.783 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 46
2016-11-11T23:50:39.170Z,1478908239.170 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:50:39.170Z,1478908239.171 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:50:39.171Z,1478908239.171 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:51:19.878Z,1478908279.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:51:20.672Z,1478908280.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:52:49.114Z,1478908369.114 [PNI_TCM](ERROR): CRC does not match. Expected:0x49580 got:0x16877
2016-11-11T23:52:52.306Z,1478908372.306 [PNI_TCM](ERROR): CRC does not match. Expected:0x63483 got:0x52545
2016-11-11T23:53:25.913Z,1478908405.913 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T23:53:25.914Z,1478908405.914 [BPC1] Data Fault, FailCount= 1
2016-11-11T23:53:25.914Z,1478908405.914 [BPC1](ERROR): Data Fault
2016-11-11T23:53:25.989Z,1478908405.989 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T23:53:27.160Z,1478908407.160 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:53:27.161Z,1478908407.161 [BPC1] No Fault, FailCount= 1
2016-11-11T23:53:39.536Z,1478908419.536 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:53:39.537Z,1478908419.537 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 47
2016-11-11T23:53:39.537Z,1478908419.537 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:53:39.551Z,1478908419.551 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:53:40.002Z,1478908420.002 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:53:40.002Z,1478908420.002 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 47
2016-11-11T23:53:43.407Z,1478908423.407 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:53:43.408Z,1478908423.408 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:53:43.408Z,1478908423.408 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:53:53.630Z,1478908433.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:53:54.424Z,1478908434.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:54:39.511Z,1478908479.511 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-11T23:54:39.511Z,1478908479.511 [Default:CheckIn:C.Wait] Stopped
2016-11-11T23:54:39.511Z,1478908479.511 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-11T23:54:39.511Z,1478908479.511 [Default:CheckIn:D] Running Loop=1
2016-11-11T23:54:39.906Z,1478908479.906 [Default:CheckIn:D] Stopped
2016-11-11T23:54:39.906Z,1478908479.906 [Default:CheckIn:E] Running Loop=1
2016-11-11T23:54:40.357Z,1478908480.357 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1144.643229 min 
2016-11-11T23:54:40.357Z,1478908480.357 [Default:CheckIn:E] Stopped
2016-11-11T23:54:40.357Z,1478908480.357 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-11T23:54:40.357Z,1478908480.357 [Default:CheckIn] Stopped
2016-11-11T23:54:40.357Z,1478908480.357 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-11T23:54:40.358Z,1478908480.358 [Default:CheckIn](INFO): Running loop #111
2016-11-11T23:54:40.358Z,1478908480.358 [Default:CheckIn] Running Loop=111
2016-11-11T23:54:40.358Z,1478908480.358 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-11T23:54:40.358Z,1478908480.358 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-11T23:54:43.800Z,1478908483.800 [NAL9602](INFO): Powering up
2016-11-11T23:54:54.973Z,1478908494.973 [NAL9602](INFO): NAL9602 initialized
2016-11-11T23:54:55.777Z,1478908495.777 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-11T23:54:55.777Z,1478908495.777 [NAL9602] Data Fault, FailCount= 2
2016-11-11T23:54:55.777Z,1478908495.777 [NAL9602](ERROR): Data Fault
2016-11-11T23:54:55.878Z,1478908495.878 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-11T23:54:56.172Z,1478908496.172 [NAL9602](INFO): Powering down
2016-11-11T23:54:57.064Z,1478908497.064 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-11T23:54:57.064Z,1478908497.064 [NAL9602] No Fault, FailCount= 2
2016-11-11T23:55:01.373Z,1478908501.372 [NAL9602](INFO): Powering up NAL9602
2016-11-11T23:55:12.230Z,1478908512.230 [NAL9602](INFO): NAL9602 initialized
2016-11-11T23:55:26.244Z,1478908526.244 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-11T23:55:26.244Z,1478908526.244 [BPC1] Data Fault, FailCount= 1
2016-11-11T23:55:26.244Z,1478908526.244 [BPC1](ERROR): Data Fault
2016-11-11T23:55:26.336Z,1478908526.336 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-11T23:55:27.475Z,1478908527.476 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:55:27.476Z,1478908527.476 [BPC1] No Fault, FailCount= 1
2016-11-11T23:56:25.353Z,1478908585.353 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-11T23:56:41.372Z,1478908601.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:56:42.168Z,1478908602.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:56:44.533Z,1478908604.533 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:56:44.533Z,1478908604.533 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 48
2016-11-11T23:56:44.533Z,1478908604.533 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:56:44.595Z,1478908604.595 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:56:44.751Z,1478908604.751 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:56:44.752Z,1478908604.751 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 48
2016-11-11T23:56:45.089Z,1478908605.089 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:56:45.089Z,1478908605.089 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:56:45.089Z,1478908605.089 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:56:45.841Z,1478908605.841 [BPC1](ERROR): Failed to receive battery data
2016-11-11T23:56:45.841Z,1478908605.841 [BPC1] Communications Fault, FailCount= 1
2016-11-11T23:56:45.841Z,1478908605.841 [BPC1](ERROR): Communications Fault
2016-11-11T23:56:45.911Z,1478908605.911 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T23:56:47.093Z,1478908607.093 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:56:47.093Z,1478908607.093 [BPC1] No Fault, FailCount= 1
2016-11-11T23:57:16.651Z,1478908636.651 [BPC1](ERROR): Failed to receive battery data
2016-11-11T23:57:16.651Z,1478908636.651 [BPC1] Communications Fault, FailCount= 1
2016-11-11T23:57:16.651Z,1478908636.651 [BPC1](ERROR): Communications Fault
2016-11-11T23:57:16.685Z,1478908636.685 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T23:57:17.913Z,1478908637.913 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:57:17.913Z,1478908637.913 [BPC1] No Fault, FailCount= 1
2016-11-11T23:57:36.670Z,1478908656.670 [PNI_TCM](ERROR): CRC does not match. Expected:0x41621 got:0x28700
2016-11-11T23:57:44.495Z,1478908664.494 [PNI_TCM](ERROR): CRC does not match. Expected:0x36933 got:0x60736
2016-11-11T23:57:44.509Z,1478908664.509 [PNI_TCM](ERROR): CRC does not match. Expected:0x42628 got:0x60800
2016-11-11T23:57:44.510Z,1478908664.510 [PNI_TCM](ERROR): CRC does not match. Expected:0x22149 got:0x60800
2016-11-11T23:57:44.510Z,1478908664.510 [PNI_TCM](ERROR): CRC does not match. Expected:0x8214 got:0x60480
2016-11-11T23:57:44.511Z,1478908664.510 [PNI_TCM](ERROR): CRC does not match. Expected:0x40108 got:0x60608
2016-11-11T23:57:44.511Z,1478908664.511 [PNI_TCM](ERROR): CRC does not match. Expected:0x44382 got:0x60736
2016-11-11T23:57:44.511Z,1478908664.511 [PNI_TCM](ERROR): CRC does not match. Expected:0x24846 got:0x60736
2016-11-11T23:57:44.512Z,1478908664.512 [PNI_TCM](ERROR): CRC does not match. Expected:0x63014 got:0x60864
2016-11-11T23:59:09.051Z,1478908749.051 [BPC1](ERROR): Failed to receive battery data
2016-11-11T23:59:09.052Z,1478908749.052 [BPC1] Communications Fault, FailCount= 1
2016-11-11T23:59:09.052Z,1478908749.052 [BPC1](ERROR): Communications Fault
2016-11-11T23:59:09.125Z,1478908749.125 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-11T23:59:10.308Z,1478908750.308 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-11T23:59:10.308Z,1478908750.308 [BPC1] No Fault, FailCount= 1
2016-11-11T23:59:15.148Z,1478908755.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:59:15.944Z,1478908755.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:59:29.120Z,1478908769.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:59:29.916Z,1478908769.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-11T23:59:40.703Z,1478908780.703 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-11T23:54:40.4Z
2016-11-11T23:59:40.703Z,1478908780.703 [Default:CheckIn:Read_GPS] Stopped
2016-11-11T23:59:40.703Z,1478908780.703 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-11T23:59:45.122Z,1478908785.122 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-11T23:59:45.122Z,1478908785.122 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 49
2016-11-11T23:59:45.122Z,1478908785.122 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-11T23:59:45.136Z,1478908785.136 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-11T23:59:45.166Z,1478908785.166 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0444.lzma
2016-11-11T23:59:45.286Z,1478908785.286 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-11T23:59:45.286Z,1478908785.286 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 49
2016-11-11T23:59:45.607Z,1478908785.607 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-11T23:59:45.612Z,1478908785.612 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-11T23:59:45.612Z,1478908785.612 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-11T23:59:45.946Z,1478908785.946 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0444.lzma.bak
2016-11-11T23:59:45.946Z,1478908785.946 [DataOverHttps](INFO): SBD MOMSN=4555883
2016-11-11T23:59:56.440Z,1478908796.440 [DataOverHttps](INFO): Sending 238 bytes from file Logs/20161111T044527/Express0445.lzma
2016-11-11T23:59:57.214Z,1478908797.214 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0445.lzma.bak
2016-11-11T23:59:57.214Z,1478908797.214 [DataOverHttps](INFO): SBD MOMSN=4555885
2016-11-11T23:59:58.670Z,1478908798.670 [Default:CheckIn:Read_Iridium] Stopped
2016-11-11T23:59:58.670Z,1478908798.670 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-11T23:59:58.670Z,1478908798.670 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T00:00:15.449Z,1478908815.449 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-12T00:00:21.052Z,1478908821.052 [NAL9602](INFO): Powering down
2016-11-12T00:02:45.777Z,1478908965.777 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:02:45.777Z,1478908965.777 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 50
2016-11-12T00:02:45.777Z,1478908965.777 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:02:45.810Z,1478908965.810 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:02:46.146Z,1478908966.146 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:02:46.146Z,1478908966.146 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 50
2016-11-12T00:02:46.536Z,1478908966.536 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:02:46.537Z,1478908966.537 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:02:46.537Z,1478908966.537 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:04:08.046Z,1478909048.046 [PNI_TCM](ERROR): CRC does not match. Expected:0x8989 got:0x16913
2016-11-12T00:04:36.616Z,1478909076.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:04:37.412Z,1478909077.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:04:58.871Z,1478909098.871 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T00:04:58.871Z,1478909098.871 [Default:CheckIn:C.Wait] Stopped
2016-11-12T00:04:58.871Z,1478909098.871 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T00:04:58.871Z,1478909098.871 [Default:CheckIn:D] Running Loop=1
2016-11-12T00:04:59.346Z,1478909099.346 [Default:CheckIn:D] Stopped
2016-11-12T00:04:59.346Z,1478909099.346 [Default:CheckIn:E] Running Loop=1
2016-11-12T00:04:59.680Z,1478909099.680 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1154.967318 min 
2016-11-12T00:04:59.680Z,1478909099.680 [Default:CheckIn:E] Stopped
2016-11-12T00:04:59.680Z,1478909099.680 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T00:04:59.680Z,1478909099.680 [Default:CheckIn] Stopped
2016-11-12T00:04:59.680Z,1478909099.680 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T00:04:59.681Z,1478909099.681 [Default:CheckIn](INFO): Running loop #112
2016-11-12T00:04:59.681Z,1478909099.681 [Default:CheckIn] Running Loop=112
2016-11-12T00:04:59.681Z,1478909099.681 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T00:04:59.681Z,1478909099.681 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T00:05:00.052Z,1478909100.052 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T00:05:00.052Z,1478909100.052 [BPC1] Data Fault, FailCount= 1
2016-11-12T00:05:00.052Z,1478909100.052 [BPC1](ERROR): Data Fault
2016-11-12T00:05:00.099Z,1478909100.099 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T00:05:03.631Z,1478909103.631 [NAL9602](INFO): Powering up
2016-11-12T00:05:04.187Z,1478909104.187 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:05:04.187Z,1478909104.187 [BPC1] No Fault, FailCount= 1
2016-11-12T00:05:14.525Z,1478909114.525 [NAL9602](INFO): NAL9602 initialized
2016-11-12T00:05:15.341Z,1478909115.341 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-12T00:05:15.341Z,1478909115.341 [NAL9602] Data Fault, FailCount= 3
2016-11-12T00:05:15.341Z,1478909115.341 [NAL9602](ERROR): Data Fault
2016-11-12T00:05:15.435Z,1478909115.435 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T00:05:15.725Z,1478909115.724 [NAL9602](INFO): Powering down
2016-11-12T00:05:16.614Z,1478909116.615 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T00:05:16.615Z,1478909116.615 [NAL9602] No Fault, FailCount= 3
2016-11-12T00:05:20.925Z,1478909120.925 [NAL9602](INFO): Powering up NAL9602
2016-11-12T00:05:31.733Z,1478909131.733 [NAL9602](INFO): NAL9602 initialized
2016-11-12T00:05:46.597Z,1478909146.597 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:05:46.597Z,1478909146.597 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 51
2016-11-12T00:05:46.598Z,1478909146.598 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:05:46.638Z,1478909146.638 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:05:47.031Z,1478909147.031 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:05:47.032Z,1478909147.032 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 51
2016-11-12T00:05:47.409Z,1478909147.409 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:05:47.409Z,1478909147.409 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:05:47.410Z,1478909147.410 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:06:20.958Z,1478909180.958 [BPC1](ERROR): Failed to receive battery data
2016-11-12T00:06:20.958Z,1478909180.958 [BPC1] Communications Fault, FailCount= 1
2016-11-12T00:06:20.958Z,1478909180.958 [BPC1](ERROR): Communications Fault
2016-11-12T00:06:21.023Z,1478909181.023 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T00:06:22.197Z,1478909182.197 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:06:22.197Z,1478909182.197 [BPC1] No Fault, FailCount= 1
2016-11-12T00:06:25.422Z,1478909185.422 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T00:07:08.487Z,1478909228.487 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T00:07:08.487Z,1478909228.487 [BPC1] Data Fault, FailCount= 1
2016-11-12T00:07:08.487Z,1478909228.487 [BPC1](ERROR): Data Fault
2016-11-12T00:07:08.538Z,1478909228.538 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T00:07:09.745Z,1478909229.745 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:07:09.745Z,1478909229.745 [BPC1] No Fault, FailCount= 1
2016-11-12T00:07:24.360Z,1478909244.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:07:25.156Z,1478909245.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:07:59.682Z,1478909279.682 [PNI_TCM](ERROR): CRC does not match. Expected:0x29124 got:0x6335
2016-11-12T00:08:47.612Z,1478909327.612 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:08:47.612Z,1478909327.612 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 52
2016-11-12T00:08:47.612Z,1478909327.612 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:08:47.634Z,1478909327.634 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:08:48.039Z,1478909328.039 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:08:48.039Z,1478909328.039 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 52
2016-11-12T00:08:48.402Z,1478909328.402 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:08:48.402Z,1478909328.402 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:08:48.403Z,1478909328.402 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:08:49.146Z,1478909329.146 [NAL9602](INFO): SBD MO Status=2, MOMSN=366, MT Status=2, MTMSN=0
2016-11-12T00:08:49.147Z,1478909329.147 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-12T00:09:20.610Z,1478909360.610 [NAL9602](INFO): SBD MO Status=2, MOMSN=366, MT Status=2, MTMSN=0
2016-11-12T00:09:20.610Z,1478909360.610 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-12T00:09:59.882Z,1478909399.882 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T00:04:59.7Z
2016-11-12T00:09:59.882Z,1478909399.882 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T00:09:59.882Z,1478909399.882 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T00:10:04.848Z,1478909404.848 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0448.lzma
2016-11-12T00:10:05.634Z,1478909405.634 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0448.lzma.bak
2016-11-12T00:10:05.634Z,1478909405.634 [DataOverHttps](INFO): SBD MOMSN=4555890
2016-11-12T00:10:12.080Z,1478909412.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:10:12.876Z,1478909412.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:10:16.049Z,1478909416.049 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20161111T044527/Express0449.lzma
2016-11-12T00:10:16.818Z,1478909416.818 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0449.lzma.bak
2016-11-12T00:10:16.818Z,1478909416.818 [DataOverHttps](INFO): SBD MOMSN=4555892
2016-11-12T00:10:18.174Z,1478909418.174 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T00:10:18.174Z,1478909418.174 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T00:10:18.174Z,1478909418.174 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T00:10:35.441Z,1478909435.441 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-12T00:10:41.032Z,1478909441.033 [NAL9602](INFO): Powering down
2016-11-12T00:11:06.668Z,1478909466.668 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T00:11:06.669Z,1478909466.668 [BPC1] Data Fault, FailCount= 1
2016-11-12T00:11:06.669Z,1478909466.669 [BPC1](ERROR): Data Fault
2016-11-12T00:11:06.698Z,1478909466.698 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T00:11:07.921Z,1478909467.921 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:11:07.921Z,1478909467.921 [BPC1] No Fault, FailCount= 1
2016-11-12T00:11:48.716Z,1478909508.716 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:11:48.716Z,1478909508.716 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 53
2016-11-12T00:11:48.716Z,1478909508.716 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:11:48.777Z,1478909508.777 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:11:49.090Z,1478909509.090 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:11:49.090Z,1478909509.090 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 53
2016-11-12T00:11:49.436Z,1478909509.436 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T00:11:49.436Z,1478909509.436 [BPC1] Data Fault, FailCount= 1
2016-11-12T00:11:49.436Z,1478909509.436 [BPC1](ERROR): Data Fault
2016-11-12T00:11:49.451Z,1478909509.451 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:11:49.452Z,1478909509.452 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:11:49.452Z,1478909509.452 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:11:49.493Z,1478909509.493 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T00:11:50.670Z,1478909510.670 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:11:50.670Z,1478909510.670 [BPC1] No Fault, FailCount= 1
2016-11-12T00:12:45.834Z,1478909565.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:12:46.628Z,1478909566.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:12:48.744Z,1478909568.744 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T00:12:48.744Z,1478909568.744 [BPC1] Data Fault, FailCount= 1
2016-11-12T00:12:48.744Z,1478909568.744 [BPC1](ERROR): Data Fault
2016-11-12T00:12:48.812Z,1478909568.812 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T00:12:50.007Z,1478909570.007 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:12:50.007Z,1478909570.007 [BPC1] No Fault, FailCount= 1
2016-11-12T00:14:49.672Z,1478909689.672 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:14:49.672Z,1478909689.672 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 54
2016-11-12T00:14:49.672Z,1478909689.672 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:14:49.686Z,1478909689.686 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:14:50.066Z,1478909690.066 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:14:50.066Z,1478909690.066 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 54
2016-11-12T00:14:50.486Z,1478909690.487 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:14:50.495Z,1478909690.495 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:14:50.496Z,1478909690.496 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:15:18.544Z,1478909718.544 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T00:15:18.544Z,1478909718.544 [Default:CheckIn:C.Wait] Stopped
2016-11-12T00:15:18.544Z,1478909718.544 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T00:15:18.544Z,1478909718.544 [Default:CheckIn:D] Running Loop=1
2016-11-12T00:15:18.817Z,1478909718.817 [Default:CheckIn:D] Stopped
2016-11-12T00:15:18.817Z,1478909718.817 [Default:CheckIn:E] Running Loop=1
2016-11-12T00:15:18.844Z,1478909718.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:15:19.252Z,1478909719.252 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1165.291797 min 
2016-11-12T00:15:19.253Z,1478909719.253 [Default:CheckIn:E] Stopped
2016-11-12T00:15:19.253Z,1478909719.253 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T00:15:19.253Z,1478909719.253 [Default:CheckIn] Stopped
2016-11-12T00:15:19.253Z,1478909719.253 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T00:15:19.253Z,1478909719.253 [Default:CheckIn](INFO): Running loop #113
2016-11-12T00:15:19.253Z,1478909719.253 [Default:CheckIn] Running Loop=113
2016-11-12T00:15:19.254Z,1478909719.253 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T00:15:19.254Z,1478909719.254 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T00:15:19.640Z,1478909719.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:15:23.006Z,1478909723.006 [NAL9602](INFO): Powering up
2016-11-12T00:15:33.929Z,1478909733.929 [NAL9602](INFO): NAL9602 initialized
2016-11-12T00:15:34.730Z,1478909734.730 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-12T00:15:34.730Z,1478909734.730 [NAL9602] Data Fault, FailCount= 4
2016-11-12T00:15:34.730Z,1478909734.730 [NAL9602](ERROR): Data Fault
2016-11-12T00:15:34.851Z,1478909734.851 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T00:15:35.128Z,1478909735.128 [NAL9602](INFO): Powering down
2016-11-12T00:15:36.052Z,1478909736.052 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T00:15:36.052Z,1478909736.052 [NAL9602] No Fault, FailCount= 4
2016-11-12T00:15:40.337Z,1478909740.337 [NAL9602](INFO): Powering up NAL9602
2016-11-12T00:15:51.536Z,1478909751.536 [NAL9602](INFO): NAL9602 initialized
2016-11-12T00:16:07.969Z,1478909767.968 [BPC1](ERROR): Failed to receive battery data
2016-11-12T00:16:07.969Z,1478909767.969 [BPC1] Communications Fault, FailCount= 1
2016-11-12T00:16:07.969Z,1478909767.969 [BPC1](ERROR): Communications Fault
2016-11-12T00:16:08.033Z,1478909768.033 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T00:16:09.212Z,1478909769.211 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:16:09.212Z,1478909769.212 [BPC1] No Fault, FailCount= 1
2016-11-12T00:16:13.530Z,1478909773.530 [NAL9602](INFO): SBD MO Status=0, MOMSN=366, MT Status=0, MTMSN=0
2016-11-12T00:16:13.530Z,1478909773.530 [NAL9602](INFO): No messages in MT queue
2016-11-12T00:16:25.566Z,1478909785.566 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T00:16:53.053Z,1478909813.053 [NAL9602](INFO): GPS fix at 20161112T001643: (36.802829, -121.788584)
2016-11-12T00:16:53.106Z,1478909813.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): horizontalPathLengthSinceLastFix_ = 15560.7, recording fix residuals...
2016-11-12T00:16:53.144Z,1478909813.144 [UniversalFixResidualReporter](INFO): Fix residual: 80.0 %DT, over the last 15560.7 m. Residual distance 12453.7 m at bearing 63.1 degrees. Fix at (36.8028, -121.7886) with 32.1 m made good.
2016-11-12T00:16:53.145Z,1478909813.145 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T00:16:53.145Z,1478909813.145 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T00:16:58.276Z,1478909818.276 [DataOverHttps](INFO): Sending 81 bytes from file Logs/20161111T044527/Courier0452.lzma
2016-11-12T00:16:59.066Z,1478909819.066 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0452.lzma.bak
2016-11-12T00:16:59.066Z,1478909819.066 [DataOverHttps](INFO): SBD MOMSN=4555897
2016-11-12T00:17:03.973Z,1478909823.973 [NAL9602](INFO): Powering down
2016-11-12T00:17:09.329Z,1478909829.329 [DataOverHttps](INFO): Sending 234 bytes from file Logs/20161111T044527/Express0453.lzma
2016-11-12T00:17:10.094Z,1478909830.094 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0453.lzma.bak
2016-11-12T00:17:10.094Z,1478909830.094 [DataOverHttps](INFO): SBD MOMSN=4555900
2016-11-12T00:17:11.612Z,1478909831.612 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T00:17:11.613Z,1478909831.612 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T00:17:11.613Z,1478909831.613 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T00:17:50.610Z,1478909870.610 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:17:50.610Z,1478909870.611 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2016-11-12T00:17:50.611Z,1478909870.611 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:17:50.641Z,1478909870.641 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:17:51.037Z,1478909871.037 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:17:51.038Z,1478909871.038 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2016-11-12T00:17:51.425Z,1478909871.425 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:17:51.426Z,1478909871.426 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:17:51.426Z,1478909871.426 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:18:07.312Z,1478909887.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:18:08.108Z,1478909888.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:18:27.645Z,1478909907.645 [BPC1](ERROR): Failed to parse message.
2016-11-12T00:18:27.645Z,1478909907.645 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T00:18:27.646Z,1478909907.645 [BPC1] Data Fault, FailCount= 1
2016-11-12T00:18:27.646Z,1478909907.645 [BPC1](ERROR): Data Fault
2016-11-12T00:18:27.713Z,1478909907.713 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T00:18:28.901Z,1478909908.901 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:18:28.901Z,1478909908.901 [BPC1] No Fault, FailCount= 1
2016-11-12T00:18:58.062Z,1478909938.062 [BPC1](ERROR): Failed to receive battery data
2016-11-12T00:18:58.062Z,1478909938.062 [BPC1] Communications Fault, FailCount= 1
2016-11-12T00:18:58.062Z,1478909938.062 [BPC1](ERROR): Communications Fault
2016-11-12T00:18:58.092Z,1478909938.092 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T00:18:59.294Z,1478909939.294 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:18:59.294Z,1478909939.294 [BPC1] No Fault, FailCount= 1
2016-11-12T00:19:57.122Z,1478909997.122 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T00:19:57.122Z,1478909997.122 [BPC1] Data Fault, FailCount= 1
2016-11-12T00:19:57.122Z,1478909997.122 [BPC1](ERROR): Data Fault
2016-11-12T00:19:57.180Z,1478909997.180 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T00:19:58.361Z,1478909998.361 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:19:58.361Z,1478909998.361 [BPC1] No Fault, FailCount= 1
2016-11-12T00:20:41.087Z,1478910041.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:20:41.880Z,1478910041.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:20:51.680Z,1478910051.680 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:20:51.680Z,1478910051.680 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2016-11-12T00:20:51.680Z,1478910051.680 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:20:51.745Z,1478910051.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:20:52.091Z,1478910052.091 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:20:52.091Z,1478910052.091 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2016-11-12T00:20:52.482Z,1478910052.482 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:20:52.482Z,1478910052.482 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:20:52.483Z,1478910052.483 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:20:55.243Z,1478910055.243 [PNI_TCM](ERROR): CRC does not match. Expected:0x8475 got:0x7490
2016-11-12T00:20:56.045Z,1478910056.045 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T00:20:56.045Z,1478910056.045 [BPC1] Data Fault, FailCount= 1
2016-11-12T00:20:56.045Z,1478910056.045 [BPC1](ERROR): Data Fault
2016-11-12T00:20:56.105Z,1478910056.105 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T00:20:57.290Z,1478910057.290 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:20:57.291Z,1478910057.291 [BPC1] No Fault, FailCount= 1
2016-11-12T00:20:57.636Z,1478910057.636 [PNI_TCM](ERROR): CRC does not match. Expected:0x20110 got:0x64793
2016-11-12T00:20:59.239Z,1478910059.239 [PNI_TCM](ERROR): CRC does not match. Expected:0x7278 got:0x180
2016-11-12T00:21:00.837Z,1478910060.837 [PNI_TCM](ERROR): CRC does not match. Expected:0x65117 got:0x61036
2016-11-12T00:21:04.034Z,1478910064.034 [PNI_TCM](ERROR): CRC does not match. Expected:0x16538 got:0x17001
2016-11-12T00:22:11.810Z,1478910131.810 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T00:22:11.810Z,1478910131.810 [Default:CheckIn:C.Wait] Stopped
2016-11-12T00:22:11.811Z,1478910131.810 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T00:22:11.811Z,1478910131.811 [Default:CheckIn:D] Running Loop=1
2016-11-12T00:22:12.202Z,1478910132.202 [Default:CheckIn:D] Stopped
2016-11-12T00:22:12.202Z,1478910132.202 [Default:CheckIn:E] Running Loop=1
2016-11-12T00:22:12.609Z,1478910132.609 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1172.181510 min 
2016-11-12T00:22:12.609Z,1478910132.609 [Default:CheckIn:E] Stopped
2016-11-12T00:22:12.610Z,1478910132.610 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T00:22:12.610Z,1478910132.610 [Default:CheckIn] Stopped
2016-11-12T00:22:12.610Z,1478910132.610 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T00:22:12.610Z,1478910132.610 [Default:CheckIn](INFO): Running loop #114
2016-11-12T00:22:12.610Z,1478910132.610 [Default:CheckIn] Running Loop=114
2016-11-12T00:22:12.610Z,1478910132.610 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T00:22:12.610Z,1478910132.610 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T00:22:16.377Z,1478910136.377 [NAL9602](INFO): Powering up
2016-11-12T00:22:27.309Z,1478910147.309 [NAL9602](INFO): NAL9602 initialized
2016-11-12T00:23:28.044Z,1478910208.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:23:28.840Z,1478910208.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:23:29.722Z,1478910209.722 [NAL9602](INFO): SBD MO Status=2, MOMSN=367, MT Status=2, MTMSN=0
2016-11-12T00:23:29.723Z,1478910209.723 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-12T00:23:52.585Z,1478910232.585 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:23:52.586Z,1478910232.586 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2016-11-12T00:23:52.586Z,1478910232.586 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:23:52.611Z,1478910232.611 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:23:52.997Z,1478910232.997 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:23:52.997Z,1478910232.997 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2016-11-12T00:23:53.400Z,1478910233.400 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:23:53.400Z,1478910233.400 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:23:53.401Z,1478910233.401 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:23:54.122Z,1478910234.122 [NAL9602](INFO): SBD MO Status=2, MOMSN=367, MT Status=2, MTMSN=0
2016-11-12T00:23:54.122Z,1478910234.122 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-12T00:23:58.153Z,1478910238.153 [PNI_TCM](ERROR): CRC does not match. Expected:0x12285 got:0x45296
2016-11-12T00:23:58.563Z,1478910238.563 [PNI_TCM](ERROR): CRC does not match. Expected:0x6822 got:0x32768
2016-11-12T00:23:59.766Z,1478910239.766 [PNI_TCM](ERROR): CRC does not match. Expected:0x17678 got:0x60864
2016-11-12T00:24:01.357Z,1478910241.357 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T00:24:01.357Z,1478910241.357 [BPC1] Data Fault, FailCount= 1
2016-11-12T00:24:01.357Z,1478910241.357 [BPC1](ERROR): Data Fault
2016-11-12T00:24:01.468Z,1478910241.468 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T00:24:02.635Z,1478910242.635 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:24:02.635Z,1478910242.635 [BPC1] No Fault, FailCount= 1
2016-11-12T00:24:02.962Z,1478910242.962 [PNI_TCM](ERROR): CRC does not match. Expected:0x46996 got:0x6335
2016-11-12T00:24:04.547Z,1478910244.547 [PNI_TCM](ERROR): CRC does not match. Expected:0x4414 got:0x1857
2016-11-12T00:24:27.946Z,1478910267.946 [NAL9602](INFO): SBD MO Status=2, MOMSN=367, MT Status=2, MTMSN=0
2016-11-12T00:24:27.946Z,1478910267.946 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-12T00:24:40.738Z,1478910280.738 [NAL9602](INFO): SBD MO Status=2, MOMSN=367, MT Status=2, MTMSN=0
2016-11-12T00:24:40.738Z,1478910280.739 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-12T00:25:23.886Z,1478910323.886 [NAL9602](INFO): SBD MO Status=0, MOMSN=367, MT Status=0, MTMSN=0
2016-11-12T00:25:23.886Z,1478910323.886 [NAL9602](INFO): No messages in MT queue
2016-11-12T00:25:23.886Z,1478910323.886 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2016-11-12T00:25:48.317Z,1478910348.317 [BPC1](ERROR): Failed to receive battery data
2016-11-12T00:25:48.317Z,1478910348.317 [BPC1] Communications Fault, FailCount= 1
2016-11-12T00:25:48.317Z,1478910348.317 [BPC1](ERROR): Communications Fault
2016-11-12T00:25:48.376Z,1478910348.376 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T00:25:49.575Z,1478910349.575 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:25:49.575Z,1478910349.575 [BPC1] No Fault, FailCount= 1
2016-11-12T00:26:25.887Z,1478910385.887 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T00:26:39.025Z,1478910399.025 [NAL9602](INFO): GPS fix at 20161112T002630: (36.802718, -121.787862)
2016-11-12T00:26:39.076Z,1478910399.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): horizontalPathLengthSinceLastFix_ = 540.834, recording fix residuals...
2016-11-12T00:26:39.116Z,1478910399.116 [UniversalFixResidualReporter](INFO): Fix residual: 88.3 %DT, over the last 540.8 m. Residual distance 477.7 m at bearing 21.1 degrees. Fix at (36.8027, -121.7879) with 65.5 m made good.
2016-11-12T00:26:39.117Z,1478910399.117 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T00:26:39.117Z,1478910399.117 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T00:26:44.239Z,1478910404.239 [DataOverHttps](INFO): Sending 89 bytes from file Logs/20161111T044527/Courier0456.lzma
2016-11-12T00:26:45.030Z,1478910405.030 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0456.lzma.bak
2016-11-12T00:26:45.030Z,1478910405.030 [DataOverHttps](INFO): SBD MOMSN=4555907
2016-11-12T00:26:50.001Z,1478910410.001 [NAL9602](INFO): Powering down
2016-11-12T00:26:55.188Z,1478910415.188 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:26:55.188Z,1478910415.188 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2016-11-12T00:26:55.188Z,1478910415.188 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:26:55.230Z,1478910415.230 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:26:55.264Z,1478910415.264 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20161111T044527/Express0457.lzma
2016-11-12T00:26:55.396Z,1478910415.396 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:26:55.396Z,1478910415.397 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2016-11-12T00:26:55.738Z,1478910415.738 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:26:55.739Z,1478910415.739 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:26:55.739Z,1478910415.739 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:26:56.850Z,1478910416.850 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0457.lzma.bak
2016-11-12T00:26:56.850Z,1478910416.850 [DataOverHttps](INFO): SBD MOMSN=4555911
2016-11-12T00:26:58.200Z,1478910418.200 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T00:26:58.200Z,1478910418.200 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T00:26:58.200Z,1478910418.200 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T00:27:01.915Z,1478910421.915 [PNI_TCM](ERROR): CRC does not match. Expected:0x50896 got:0x16913
2016-11-12T00:27:01.915Z,1478910421.915 [PNI_TCM](ERROR): CRC does not match. Expected:0x27758 got:0x16913
2016-11-12T00:27:01.916Z,1478910421.916 [PNI_TCM](ERROR): CRC does not match. Expected:0x19374 got:0x16913
2016-11-12T00:27:01.916Z,1478910421.916 [PNI_TCM](ERROR): CRC does not match. Expected:0x36823 got:0x16913
2016-11-12T00:27:01.917Z,1478910421.917 [PNI_TCM](ERROR): CRC does not match. Expected:0x48330 got:0x16913
2016-11-12T00:27:01.917Z,1478910421.917 [PNI_TCM](ERROR): CRC does not match. Expected:0x10935 got:0x16913
2016-11-12T00:27:01.918Z,1478910421.918 [PNI_TCM](ERROR): CRC does not match. Expected:0x22676 got:0x16913
2016-11-12T00:27:01.918Z,1478910421.918 [PNI_TCM](ERROR): CRC does not match. Expected:0x37538 got:0x16913
2016-11-12T00:27:01.918Z,1478910421.918 [PNI_TCM](ERROR): CRC does not match. Expected:0x7648 got:0x16913
2016-11-12T00:28:40.897Z,1478910520.897 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2016-11-12T00:28:44.096Z,1478910524.096 [PNI_TCM](ERROR): CRC does not match. Expected:0x41504 got:0x17006
2016-11-12T00:28:47.306Z,1478910527.306 [PNI_TCM](ERROR): CRC does not match. Expected:0x27927 got:0x49579
2016-11-12T00:28:48.889Z,1478910528.889 [PNI_TCM](ERROR): CRC does not match. Expected:0x15112 got:0x6978
2016-11-12T00:29:30.420Z,1478910570.420 [PNI_TCM](ERROR): CRC does not match. Expected:0x14731 got:0x16962
2016-11-12T00:29:32.024Z,1478910572.024 [PNI_TCM](ERROR): CRC does not match. Expected:0x24769 got:0x7490
2016-11-12T00:29:35.222Z,1478910575.222 [PNI_TCM](ERROR): CRC does not match. Expected:0x48521 got:0x1857
2016-11-12T00:29:38.417Z,1478910578.417 [PNI_TCM](ERROR): CRC does not match. Expected:0x46003 got:0x29469
2016-11-12T00:29:40.013Z,1478910580.013 [PNI_TCM](ERROR): CRC does not match. Expected:0x9128 got:0x4479
2016-11-12T00:29:56.056Z,1478910596.056 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:29:56.056Z,1478910596.056 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2016-11-12T00:29:56.056Z,1478910596.056 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:29:56.070Z,1478910596.070 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:29:56.469Z,1478910596.469 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:29:56.469Z,1478910596.469 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2016-11-12T00:29:56.850Z,1478910596.850 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:29:56.850Z,1478910596.850 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:29:56.851Z,1478910596.851 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:30:32.377Z,1478910632.377 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T00:30:32.377Z,1478910632.377 [BPC1] Data Fault, FailCount= 1
2016-11-12T00:30:32.377Z,1478910632.377 [BPC1](ERROR): Data Fault
2016-11-12T00:30:32.456Z,1478910632.456 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T00:30:33.656Z,1478910633.656 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:30:33.656Z,1478910633.656 [BPC1] No Fault, FailCount= 1
2016-11-12T00:30:59.584Z,1478910659.584 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T00:30:59.585Z,1478910659.585 [BPC1] Data Fault, FailCount= 1
2016-11-12T00:30:59.585Z,1478910659.585 [BPC1](ERROR): Data Fault
2016-11-12T00:30:59.640Z,1478910659.640 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T00:31:03.614Z,1478910663.614 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:31:03.614Z,1478910663.614 [BPC1] No Fault, FailCount= 1
2016-11-12T00:31:18.084Z,1478910678.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:31:18.880Z,1478910678.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:31:32.052Z,1478910692.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:31:32.848Z,1478910692.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:31:58.380Z,1478910718.380 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T00:31:58.380Z,1478910718.381 [Default:CheckIn:C.Wait] Stopped
2016-11-12T00:31:58.381Z,1478910718.381 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T00:31:58.381Z,1478910718.381 [Default:CheckIn:D] Running Loop=1
2016-11-12T00:31:58.868Z,1478910718.868 [Default:CheckIn:D] Stopped
2016-11-12T00:31:58.868Z,1478910718.868 [Default:CheckIn:E] Running Loop=1
2016-11-12T00:31:59.192Z,1478910719.192 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1181.959245 min 
2016-11-12T00:31:59.192Z,1478910719.192 [Default:CheckIn:E] Stopped
2016-11-12T00:31:59.192Z,1478910719.192 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T00:31:59.192Z,1478910719.193 [Default:CheckIn] Stopped
2016-11-12T00:31:59.193Z,1478910719.193 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T00:31:59.193Z,1478910719.193 [Default:CheckIn](INFO): Running loop #115
2016-11-12T00:31:59.193Z,1478910719.193 [Default:CheckIn] Running Loop=115
2016-11-12T00:31:59.193Z,1478910719.193 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T00:31:59.193Z,1478910719.193 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T00:31:59.924Z,1478910719.924 [NAL9602](INFO): Powering up
2016-11-12T00:32:11.029Z,1478910731.029 [NAL9602](INFO): NAL9602 initialized
2016-11-12T00:32:16.250Z,1478910736.250 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T00:32:16.250Z,1478910736.250 [BPC1] Data Fault, FailCount= 1
2016-11-12T00:32:16.251Z,1478910736.251 [BPC1](ERROR): Data Fault
2016-11-12T00:32:16.311Z,1478910736.311 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T00:32:17.493Z,1478910737.493 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:32:17.493Z,1478910737.493 [BPC1] No Fault, FailCount= 1
2016-11-12T00:32:53.830Z,1478910773.830 [NAL9602](INFO): SBD MO Status=2, MOMSN=368, MT Status=2, MTMSN=0
2016-11-12T00:32:53.830Z,1478910773.830 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-12T00:32:57.119Z,1478910777.119 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T00:32:57.120Z,1478910777.120 [BPC1] Data Fault, FailCount= 1
2016-11-12T00:32:57.120Z,1478910777.120 [BPC1](ERROR): Data Fault
2016-11-12T00:32:57.174Z,1478910777.174 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:32:57.174Z,1478910777.174 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2016-11-12T00:32:57.174Z,1478910777.174 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:32:57.209Z,1478910777.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:32:57.209Z,1478910777.209 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T00:32:57.527Z,1478910777.527 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:32:57.527Z,1478910777.527 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2016-11-12T00:32:57.874Z,1478910777.875 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:32:57.883Z,1478910777.883 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:32:57.884Z,1478910777.884 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:32:58.364Z,1478910778.364 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:32:58.364Z,1478910778.364 [BPC1] No Fault, FailCount= 1
2016-11-12T00:33:37.860Z,1478910817.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:33:38.656Z,1478910818.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:34:25.286Z,1478910865.286 [NAL9602](INFO): SBD MO Status=0, MOMSN=368, MT Status=0, MTMSN=0
2016-11-12T00:34:25.286Z,1478910865.286 [NAL9602](INFO): No messages in MT queue
2016-11-12T00:35:38.404Z,1478910938.404 [BPC1](ERROR): Failed to receive battery data
2016-11-12T00:35:38.404Z,1478910938.404 [BPC1] Communications Fault, FailCount= 1
2016-11-12T00:35:38.404Z,1478910938.404 [BPC1](ERROR): Communications Fault
2016-11-12T00:35:38.490Z,1478910938.490 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T00:35:39.648Z,1478910939.648 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:35:39.649Z,1478910939.648 [BPC1] No Fault, FailCount= 1
2016-11-12T00:35:57.998Z,1478910957.998 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:35:57.998Z,1478910957.998 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 4
2016-11-12T00:35:57.998Z,1478910957.998 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:35:58.012Z,1478910958.012 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:35:58.414Z,1478910958.414 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:35:58.414Z,1478910958.414 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 4
2016-11-12T00:35:58.888Z,1478910958.888 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:35:58.889Z,1478910958.889 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:35:58.889Z,1478910958.889 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:36:26.029Z,1478910986.029 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T00:36:59.209Z,1478911019.209 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T00:31:59.2Z
2016-11-12T00:36:59.209Z,1478911019.209 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T00:36:59.209Z,1478911019.209 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T00:37:04.140Z,1478911024.141 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0460.lzma
2016-11-12T00:37:05.132Z,1478911025.132 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0460.lzma.bak
2016-11-12T00:37:05.132Z,1478911025.132 [DataOverHttps](INFO): SBD MOMSN=4555915
2016-11-12T00:37:09.745Z,1478911029.745 [NAL9602](INFO): Powering down
2016-11-12T00:37:15.198Z,1478911035.198 [DataOverHttps](INFO): Sending 145 bytes from file Logs/20161111T044527/Express0461.lzma
2016-11-12T00:37:15.998Z,1478911035.998 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0461.lzma.bak
2016-11-12T00:37:15.998Z,1478911035.998 [DataOverHttps](INFO): SBD MOMSN=4555917
2016-11-12T00:37:17.350Z,1478911037.350 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T00:37:17.350Z,1478911037.351 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T00:37:17.351Z,1478911037.351 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T00:38:59.238Z,1478911139.238 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:38:59.238Z,1478911139.238 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 5
2016-11-12T00:38:59.238Z,1478911139.239 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:38:59.273Z,1478911139.273 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:38:59.324Z,1478911139.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:38:59.675Z,1478911139.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:38:59.675Z,1478911139.675 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 5
2016-11-12T00:39:00.038Z,1478911140.038 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:39:00.039Z,1478911140.039 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:39:00.039Z,1478911140.039 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:39:00.120Z,1478911140.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:39:13.308Z,1478911153.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:39:14.104Z,1478911154.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:39:23.089Z,1478911163.089 [PNI_TCM](ERROR): CRC does not match. Expected:0x24468 got:0x64467
2016-11-12T00:39:24.682Z,1478911164.682 [PNI_TCM](ERROR): CRC does not match. Expected:0x21176 got:0x16878
2016-11-12T00:39:26.281Z,1478911166.281 [PNI_TCM](ERROR): CRC does not match. Expected:0x11671 got:0x6591
2016-11-12T00:39:27.881Z,1478911167.881 [PNI_TCM](ERROR): CRC does not match. Expected:0x24791 got:0x7361
2016-11-12T00:39:29.485Z,1478911169.485 [PNI_TCM](ERROR): CRC does not match. Expected:0x20126 got:0x22023
2016-11-12T00:40:22.207Z,1478911222.207 [PNI_TCM](ERROR): CRC does not match. Expected:0x9981 got:0x6335
2016-11-12T00:40:36.572Z,1478911236.572 [PNI_TCM](ERROR): CRC does not match. Expected:0x15831 got:0x58984
2016-11-12T00:40:41.365Z,1478911241.365 [PNI_TCM](ERROR): CRC does not match. Expected:0x32059 got:0x48986
2016-11-12T00:40:42.969Z,1478911242.969 [PNI_TCM](ERROR): CRC does not match. Expected:0x14504 got:0x7361
2016-11-12T00:41:24.490Z,1478911284.490 [PNI_TCM](ERROR): CRC does not match. Expected:0x22945 got:0x49148
2016-11-12T00:41:24.889Z,1478911284.889 [PNI_TCM](ERROR): CRC does not match. Expected:0x308 got:0x16962
2016-11-12T00:41:26.104Z,1478911286.104 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2016-11-12T00:41:30.889Z,1478911290.889 [PNI_TCM](ERROR): CRC does not match. Expected:0x23102 got:0x7943
2016-11-12T00:41:34.105Z,1478911294.105 [PNI_TCM](ERROR): CRC does not match. Expected:0x54261 got:0x60800
2016-11-12T00:41:47.068Z,1478911307.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:41:47.864Z,1478911307.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:42:00.136Z,1478911320.136 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:42:00.136Z,1478911320.136 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 6
2016-11-12T00:42:00.136Z,1478911320.136 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:42:00.162Z,1478911320.162 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:42:00.544Z,1478911320.544 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:42:00.544Z,1478911320.545 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 6
2016-11-12T00:42:00.921Z,1478911320.921 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:42:00.921Z,1478911320.921 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:42:00.922Z,1478911320.922 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:42:17.756Z,1478911337.756 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T00:42:17.756Z,1478911337.756 [Default:CheckIn:C.Wait] Stopped
2016-11-12T00:42:17.756Z,1478911337.756 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T00:42:17.756Z,1478911337.756 [Default:CheckIn:D] Running Loop=1
2016-11-12T00:42:18.238Z,1478911338.238 [Default:CheckIn:D] Stopped
2016-11-12T00:42:18.238Z,1478911338.238 [Default:CheckIn:E] Running Loop=1
2016-11-12T00:42:18.529Z,1478911338.529 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1192.282161 min 
2016-11-12T00:42:18.529Z,1478911338.529 [Default:CheckIn:E] Stopped
2016-11-12T00:42:18.529Z,1478911338.529 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T00:42:18.529Z,1478911338.529 [Default:CheckIn] Stopped
2016-11-12T00:42:18.529Z,1478911338.529 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T00:42:18.530Z,1478911338.530 [Default:CheckIn](INFO): Running loop #116
2016-11-12T00:42:18.530Z,1478911338.530 [Default:CheckIn] Running Loop=116
2016-11-12T00:42:18.530Z,1478911338.530 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T00:42:18.530Z,1478911338.530 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T00:42:22.280Z,1478911342.280 [NAL9602](INFO): Powering up
2016-11-12T00:42:33.212Z,1478911353.212 [NAL9602](INFO): NAL9602 initialized
2016-11-12T00:42:34.005Z,1478911354.005 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-12T00:42:34.005Z,1478911354.005 [NAL9602] Data Fault, FailCount= 1
2016-11-12T00:42:34.005Z,1478911354.005 [NAL9602](ERROR): Data Fault
2016-11-12T00:42:34.118Z,1478911354.118 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T00:42:34.413Z,1478911354.413 [NAL9602](INFO): Powering down
2016-11-12T00:42:35.327Z,1478911355.327 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T00:42:35.327Z,1478911355.327 [NAL9602] No Fault, FailCount= 1
2016-11-12T00:42:39.605Z,1478911359.605 [NAL9602](INFO): Powering up NAL9602
2016-11-12T00:42:50.812Z,1478911370.812 [NAL9602](INFO): NAL9602 initialized
2016-11-12T00:43:34.730Z,1478911414.730 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T00:43:34.730Z,1478911414.730 [BPC1] Data Fault, FailCount= 1
2016-11-12T00:43:34.730Z,1478911414.730 [BPC1](ERROR): Data Fault
2016-11-12T00:43:34.816Z,1478911414.816 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T00:43:35.993Z,1478911415.993 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:43:35.993Z,1478911415.993 [BPC1] No Fault, FailCount= 1
2016-11-12T00:43:47.937Z,1478911427.937 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T00:43:47.937Z,1478911427.937 [BPC1] Data Fault, FailCount= 2
2016-11-12T00:43:47.937Z,1478911427.937 [BPC1](ERROR): Data Fault
2016-11-12T00:43:48.000Z,1478911428.000 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T00:43:49.205Z,1478911429.205 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:43:49.205Z,1478911429.205 [BPC1] No Fault, FailCount= 2
2016-11-12T00:44:20.832Z,1478911460.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:44:21.628Z,1478911461.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:44:59.834Z,1478911499.834 [NAL9602](INFO): SBD MO Status=2, MOMSN=369, MT Status=2, MTMSN=0
2016-11-12T00:44:59.834Z,1478911499.834 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-12T00:45:01.118Z,1478911501.118 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:45:01.119Z,1478911501.118 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 7
2016-11-12T00:45:01.119Z,1478911501.118 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:45:01.133Z,1478911501.133 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:45:01.519Z,1478911501.519 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:45:01.520Z,1478911501.520 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 7
2016-11-12T00:45:01.933Z,1478911501.933 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:45:01.934Z,1478911501.934 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:45:01.934Z,1478911501.934 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:45:17.935Z,1478911517.935 [BPC1](ERROR): Failed to receive battery data
2016-11-12T00:45:17.936Z,1478911517.936 [BPC1] Communications Fault, FailCount= 1
2016-11-12T00:45:17.936Z,1478911517.936 [BPC1](ERROR): Communications Fault
2016-11-12T00:45:18.014Z,1478911518.014 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T00:45:19.109Z,1478911519.109 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:45:19.109Z,1478911519.109 [BPC1] No Fault, FailCount= 1
2016-11-12T00:46:26.063Z,1478911586.063 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T00:46:32.817Z,1478911592.817 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2016-11-12T00:46:37.614Z,1478911597.614 [PNI_TCM](ERROR): CRC does not match. Expected:0x45282 got:0x7490
2016-11-12T00:46:40.817Z,1478911600.817 [PNI_TCM](ERROR): CRC does not match. Expected:0x50230 got:0x34117
2016-11-12T00:47:18.836Z,1478911638.836 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T00:42:18.5Z
2016-11-12T00:47:18.836Z,1478911638.836 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T00:47:18.836Z,1478911638.836 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T00:47:23.949Z,1478911643.949 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0464.lzma
2016-11-12T00:47:24.738Z,1478911644.738 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0464.lzma.bak
2016-11-12T00:47:24.738Z,1478911644.738 [DataOverHttps](INFO): SBD MOMSN=4555920
2016-11-12T00:47:35.036Z,1478911655.036 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20161111T044527/Express0465.lzma
2016-11-12T00:47:35.806Z,1478911655.806 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0465.lzma.bak
2016-11-12T00:47:35.806Z,1478911655.806 [DataOverHttps](INFO): SBD MOMSN=4555922
2016-11-12T00:47:37.196Z,1478911657.196 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T00:47:37.196Z,1478911657.196 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T00:47:37.197Z,1478911657.197 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T00:47:54.401Z,1478911674.401 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-12T00:47:59.996Z,1478911679.996 [NAL9602](INFO): Powering down
2016-11-12T00:48:02.049Z,1478911682.049 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:48:02.049Z,1478911682.049 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 8
2016-11-12T00:48:02.049Z,1478911682.049 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:48:02.091Z,1478911682.092 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:48:02.484Z,1478911682.484 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:48:02.484Z,1478911682.484 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 8
2016-11-12T00:48:02.852Z,1478911682.852 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:48:02.853Z,1478911682.852 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:48:02.853Z,1478911682.853 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:48:26.824Z,1478911706.824 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T00:48:26.824Z,1478911706.824 [BPC1] Data Fault, FailCount= 1
2016-11-12T00:48:26.824Z,1478911706.824 [BPC1](ERROR): Data Fault
2016-11-12T00:48:26.905Z,1478911706.905 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T00:48:28.078Z,1478911708.078 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:48:28.078Z,1478911708.078 [BPC1] No Fault, FailCount= 1
2016-11-12T00:48:42.589Z,1478911722.589 [PNI_TCM](ERROR): CRC does not match. Expected:0x8961 got:0x49579
2016-11-12T00:48:58.182Z,1478911738.181 [PNI_TCM](ERROR): CRC does not match. Expected:0x54469 got:0x12551
2016-11-12T00:49:28.332Z,1478911768.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:49:29.128Z,1478911769.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:49:42.320Z,1478911782.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:49:43.117Z,1478911783.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:49:56.292Z,1478911796.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:49:57.088Z,1478911797.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:50:24.179Z,1478911824.179 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T00:50:24.180Z,1478911824.180 [BPC1] Data Fault, FailCount= 1
2016-11-12T00:50:24.180Z,1478911824.180 [BPC1](ERROR): Data Fault
2016-11-12T00:50:24.245Z,1478911824.245 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T00:50:25.493Z,1478911825.493 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:50:25.493Z,1478911825.493 [BPC1] No Fault, FailCount= 1
2016-11-12T00:51:03.002Z,1478911863.002 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:51:03.002Z,1478911863.002 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 9
2016-11-12T00:51:03.002Z,1478911863.002 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:51:03.017Z,1478911863.017 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:51:03.411Z,1478911863.411 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:51:03.415Z,1478911863.415 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 9
2016-11-12T00:51:03.782Z,1478911863.782 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:51:03.783Z,1478911863.783 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:51:03.785Z,1478911863.785 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:52:16.068Z,1478911936.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:52:16.864Z,1478911936.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:52:37.382Z,1478911957.382 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T00:52:37.382Z,1478911957.382 [Default:CheckIn:C.Wait] Stopped
2016-11-12T00:52:37.382Z,1478911957.382 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T00:52:37.382Z,1478911957.382 [Default:CheckIn:D] Running Loop=1
2016-11-12T00:52:37.800Z,1478911957.800 [Default:CheckIn:D] Stopped
2016-11-12T00:52:37.800Z,1478911957.800 [Default:CheckIn:E] Running Loop=1
2016-11-12T00:52:38.170Z,1478911958.170 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1202.608203 min 
2016-11-12T00:52:38.170Z,1478911958.170 [Default:CheckIn:E] Stopped
2016-11-12T00:52:38.170Z,1478911958.170 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T00:52:38.170Z,1478911958.170 [Default:CheckIn] Stopped
2016-11-12T00:52:38.170Z,1478911958.170 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T00:52:38.171Z,1478911958.171 [Default:CheckIn](INFO): Running loop #117
2016-11-12T00:52:38.171Z,1478911958.171 [Default:CheckIn] Running Loop=117
2016-11-12T00:52:38.171Z,1478911958.171 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T00:52:38.171Z,1478911958.171 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T00:52:38.929Z,1478911958.929 [NAL9602](INFO): Powering up
2016-11-12T00:52:50.053Z,1478911970.053 [NAL9602](INFO): NAL9602 initialized
2016-11-12T00:53:22.057Z,1478912002.057 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-12T00:53:22.131Z,1478912002.131 [NAL9602](FAULT): received: 
+CSQ:0

OK9, 2, 0, 0, 0

OK
2016-11-12T00:53:22.131Z,1478912002.131 [NAL9602] Data Fault, FailCount= 2
2016-11-12T00:53:22.131Z,1478912002.131 [NAL9602](ERROR): Data Fault
2016-11-12T00:53:22.236Z,1478912002.236 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T00:53:22.452Z,1478912002.453 [NAL9602](INFO): Powering down
2016-11-12T00:53:23.338Z,1478912003.338 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T00:53:23.338Z,1478912003.338 [NAL9602] No Fault, FailCount= 2
2016-11-12T00:53:27.653Z,1478912007.653 [NAL9602](INFO): Powering up NAL9602
2016-11-12T00:53:38.453Z,1478912018.453 [NAL9602](INFO): NAL9602 initialized
2016-11-12T00:53:39.264Z,1478912019.264 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-12T00:53:39.264Z,1478912019.264 [NAL9602] Data Fault, FailCount= 3
2016-11-12T00:53:39.264Z,1478912019.264 [NAL9602](ERROR): Data Fault
2016-11-12T00:53:39.362Z,1478912019.362 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T00:53:42.589Z,1478912022.589 [NAL9602](INFO): Powering down
2016-11-12T00:53:43.239Z,1478912023.239 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T00:53:43.239Z,1478912023.239 [NAL9602] No Fault, FailCount= 3
2016-11-12T00:53:47.909Z,1478912027.909 [NAL9602](INFO): Powering up NAL9602
2016-11-12T00:53:59.109Z,1478912039.109 [NAL9602](INFO): NAL9602 initialized
2016-11-12T00:54:03.977Z,1478912043.977 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:54:03.978Z,1478912043.978 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 10
2016-11-12T00:54:03.978Z,1478912043.978 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:54:04.004Z,1478912044.004 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:54:04.391Z,1478912044.391 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:54:04.391Z,1478912044.391 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 10
2016-11-12T00:54:04.776Z,1478912044.776 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:54:04.776Z,1478912044.776 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:54:04.777Z,1478912044.777 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:54:49.836Z,1478912089.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:54:50.634Z,1478912090.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:55:00.782Z,1478912100.782 [BPC1](ERROR): Failed to receive battery data
2016-11-12T00:55:00.782Z,1478912100.782 [BPC1] Communications Fault, FailCount= 1
2016-11-12T00:55:00.782Z,1478912100.782 [BPC1](ERROR): Communications Fault
2016-11-12T00:55:00.849Z,1478912100.849 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T00:55:02.034Z,1478912102.034 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:55:02.034Z,1478912102.034 [BPC1] No Fault, FailCount= 1
2016-11-12T00:55:09.583Z,1478912109.583 [PNI_TCM](ERROR): CRC does not match. Expected:0x19610 got:0x6591
2016-11-12T00:55:21.984Z,1478912121.984 [PNI_TCM](ERROR): CRC does not match. Expected:0x15128 got:0x4123
2016-11-12T00:55:24.775Z,1478912124.775 [PNI_TCM](ERROR): CRC does not match. Expected:0x5577 got:0x32222
2016-11-12T00:55:26.389Z,1478912126.389 [PNI_TCM](ERROR): CRC does not match. Expected:0x58016 got:0x48865
2016-11-12T00:56:26.183Z,1478912186.183 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T00:57:04.896Z,1478912224.896 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T00:57:04.896Z,1478912224.896 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 11
2016-11-12T00:57:04.896Z,1478912224.896 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T00:57:04.923Z,1478912224.923 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T00:57:05.299Z,1478912225.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T00:57:05.299Z,1478912225.299 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 11
2016-11-12T00:57:05.703Z,1478912225.703 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T00:57:05.704Z,1478912225.704 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T00:57:05.704Z,1478912225.704 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T00:57:23.588Z,1478912243.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:57:24.384Z,1478912244.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T00:57:32.437Z,1478912252.437 [BPC1](ERROR): Failed to receive battery data
2016-11-12T00:57:32.437Z,1478912252.437 [BPC1] Communications Fault, FailCount= 1
2016-11-12T00:57:32.438Z,1478912252.438 [BPC1](ERROR): Communications Fault
2016-11-12T00:57:32.505Z,1478912252.505 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T00:57:33.681Z,1478912253.681 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T00:57:33.681Z,1478912253.681 [BPC1] No Fault, FailCount= 1
2016-11-12T00:57:38.484Z,1478912258.484 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T00:52:38.2Z
2016-11-12T00:57:38.484Z,1478912258.484 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T00:57:38.484Z,1478912258.484 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T00:57:43.453Z,1478912263.453 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0468.lzma
2016-11-12T00:57:44.264Z,1478912264.264 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0468.lzma.bak
2016-11-12T00:57:44.265Z,1478912264.265 [DataOverHttps](INFO): SBD MOMSN=4555926
2016-11-12T00:57:54.350Z,1478912274.350 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-12T00:57:54.475Z,1478912274.475 [DataOverHttps](INFO): Sending 253 bytes from file Logs/20161111T044527/Express0469.lzma
2016-11-12T00:57:55.266Z,1478912275.266 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0469.lzma.bak
2016-11-12T00:57:55.266Z,1478912275.266 [DataOverHttps](INFO): SBD MOMSN=4555928
2016-11-12T00:57:56.705Z,1478912276.705 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T00:57:56.705Z,1478912276.705 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T00:57:56.705Z,1478912276.705 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T00:58:00.058Z,1478912280.059 [NAL9602](INFO): Powering down
2016-11-12T01:00:05.873Z,1478912405.873 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:00:05.873Z,1478912405.873 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 12
2016-11-12T01:00:05.873Z,1478912405.873 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:00:05.904Z,1478912405.904 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:00:06.351Z,1478912406.351 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:00:06.351Z,1478912406.351 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 12
2016-11-12T01:00:06.673Z,1478912406.673 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:00:06.674Z,1478912406.674 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:00:06.674Z,1478912406.674 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:00:53.852Z,1478912453.852 [PNI_TCM](ERROR): CRC does not match. Expected:0x48360 got:0x40604
2016-11-12T01:00:57.056Z,1478912457.056 [PNI_TCM](ERROR): CRC does not match. Expected:0x23928 got:0x29
2016-11-12T01:01:27.736Z,1478912487.736 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T01:01:27.736Z,1478912487.736 [BPC1] Data Fault, FailCount= 1
2016-11-12T01:01:27.736Z,1478912487.736 [BPC1](ERROR): Data Fault
2016-11-12T01:01:27.807Z,1478912487.807 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T01:01:28.965Z,1478912488.966 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:01:28.966Z,1478912488.966 [BPC1] No Fault, FailCount= 1
2016-11-12T01:02:45.076Z,1478912565.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:02:45.872Z,1478912565.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:02:56.881Z,1478912576.881 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T01:02:56.881Z,1478912576.881 [Default:CheckIn:C.Wait] Stopped
2016-11-12T01:02:56.881Z,1478912576.881 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T01:02:56.881Z,1478912576.881 [Default:CheckIn:D] Running Loop=1
2016-11-12T01:02:57.275Z,1478912577.274 [Default:CheckIn:D] Stopped
2016-11-12T01:02:57.275Z,1478912577.275 [Default:CheckIn:E] Running Loop=1
2016-11-12T01:02:57.674Z,1478912577.674 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1212.932682 min 
2016-11-12T01:02:57.675Z,1478912577.675 [Default:CheckIn:E] Stopped
2016-11-12T01:02:57.675Z,1478912577.675 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T01:02:57.675Z,1478912577.675 [Default:CheckIn] Stopped
2016-11-12T01:02:57.675Z,1478912577.675 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T01:02:57.675Z,1478912577.675 [Default:CheckIn](INFO): Running loop #118
2016-11-12T01:02:57.676Z,1478912577.676 [Default:CheckIn] Running Loop=118
2016-11-12T01:02:57.676Z,1478912577.676 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T01:02:57.676Z,1478912577.676 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T01:02:58.412Z,1478912578.412 [NAL9602](INFO): Powering up
2016-11-12T01:03:06.729Z,1478912586.729 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:03:06.729Z,1478912586.729 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 13
2016-11-12T01:03:06.729Z,1478912586.729 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:03:06.756Z,1478912586.756 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:03:07.140Z,1478912587.140 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:03:07.140Z,1478912587.141 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 13
2016-11-12T01:03:07.572Z,1478912587.572 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:03:07.573Z,1478912587.573 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:03:07.573Z,1478912587.573 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:03:09.472Z,1478912589.472 [NAL9602](INFO): NAL9602 initialized
2016-11-12T01:03:41.465Z,1478912621.465 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-12T01:03:41.543Z,1478912621.543 [NAL9602](FAULT): received: 
+CSQ:0

OK9, 2, 0, 0, 0

OK
2016-11-12T01:03:41.543Z,1478912621.543 [NAL9602] Data Fault, FailCount= 4
2016-11-12T01:03:41.543Z,1478912621.543 [NAL9602](ERROR): Data Fault
2016-11-12T01:03:41.626Z,1478912621.626 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T01:03:41.873Z,1478912621.873 [NAL9602](INFO): Powering down
2016-11-12T01:03:42.733Z,1478912622.733 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T01:03:42.733Z,1478912622.733 [NAL9602] No Fault, FailCount= 4
2016-11-12T01:03:47.065Z,1478912627.065 [NAL9602](INFO): Powering up NAL9602
2016-11-12T01:03:58.265Z,1478912638.265 [NAL9602](INFO): NAL9602 initialized
2016-11-12T01:04:02.097Z,1478912642.097 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-12T01:04:02.097Z,1478912642.097 [NAL9602] Data Fault, FailCount= 5
2016-11-12T01:04:02.097Z,1478912642.097 [NAL9602](ERROR): Data Fault
2016-11-12T01:04:02.207Z,1478912642.207 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T01:04:02.208Z,1478912642.208 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-11-12T01:04:02.232Z,1478912642.232 [NAL9602](INFO): Powering down
2016-11-12T01:05:32.836Z,1478912732.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:05:33.632Z,1478912733.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:05:46.800Z,1478912746.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:05:47.596Z,1478912747.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:06:02.772Z,1478912762.772 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T01:06:02.772Z,1478912762.772 [NAL9602] No Fault, FailCount= 5
2016-11-12T01:06:02.794Z,1478912762.794 [NAL9602](INFO): Powering up NAL9602
2016-11-12T01:06:07.658Z,1478912767.658 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:06:07.658Z,1478912767.658 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 14
2016-11-12T01:06:07.658Z,1478912767.658 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:06:07.673Z,1478912767.673 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:06:08.075Z,1478912768.076 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:06:08.076Z,1478912768.076 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 14
2016-11-12T01:06:08.461Z,1478912768.461 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:06:08.461Z,1478912768.461 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:06:08.461Z,1478912768.461 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:06:13.597Z,1478912773.597 [NAL9602](INFO): NAL9602 initialized
2016-11-12T01:06:26.491Z,1478912786.491 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T01:06:36.030Z,1478912796.030 [BPC1](ERROR): Failed to parse message.
2016-11-12T01:06:36.030Z,1478912796.030 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T01:06:36.030Z,1478912796.030 [BPC1] Data Fault, FailCount= 1
2016-11-12T01:06:36.031Z,1478912796.030 [BPC1](ERROR): Data Fault
2016-11-12T01:06:36.113Z,1478912796.113 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T01:06:37.257Z,1478912797.257 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:06:37.257Z,1478912797.257 [BPC1] No Fault, FailCount= 1
2016-11-12T01:07:20.841Z,1478912840.841 [PNI_TCM](ERROR): CRC does not match. Expected:0x18040 got:0x61056
2016-11-12T01:07:28.450Z,1478912848.450 [PNI_TCM](ERROR): CRC does not match. Expected:0x30842 got:0x11942
2016-11-12T01:07:57.692Z,1478912877.692 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T01:02:57.7Z
2016-11-12T01:07:57.692Z,1478912877.692 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T01:07:57.692Z,1478912877.692 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T01:08:02.411Z,1478912882.411 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20161111T044527/Courier0472.lzma
2016-11-12T01:08:03.210Z,1478912883.210 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0472.lzma.bak
2016-11-12T01:08:03.210Z,1478912883.210 [DataOverHttps](INFO): SBD MOMSN=4555934
2016-11-12T01:08:08.132Z,1478912888.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:08:08.928Z,1478912888.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:08:13.502Z,1478912893.502 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-12T01:08:13.619Z,1478912893.619 [DataOverHttps](INFO): Sending 253 bytes from file Logs/20161111T044527/Express0473.lzma
2016-11-12T01:08:14.410Z,1478912894.411 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0473.lzma.bak
2016-11-12T01:08:14.411Z,1478912894.411 [DataOverHttps](INFO): SBD MOMSN=4555937
2016-11-12T01:08:15.835Z,1478912895.835 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T01:08:15.835Z,1478912895.835 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T01:08:15.835Z,1478912895.835 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T01:08:19.190Z,1478912899.190 [NAL9602](INFO): Powering down
2016-11-12T01:08:24.592Z,1478912904.592 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T01:08:24.592Z,1478912904.592 [BPC1] Data Fault, FailCount= 1
2016-11-12T01:08:24.592Z,1478912904.592 [BPC1](ERROR): Data Fault
2016-11-12T01:08:24.671Z,1478912904.671 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T01:08:25.862Z,1478912905.862 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:08:25.862Z,1478912905.862 [BPC1] No Fault, FailCount= 1
2016-11-12T01:09:08.614Z,1478912948.614 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:09:08.614Z,1478912948.615 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 15
2016-11-12T01:09:08.615Z,1478912948.615 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:09:08.664Z,1478912948.664 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:09:09.075Z,1478912949.075 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:09:09.075Z,1478912949.075 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 15
2016-11-12T01:09:09.479Z,1478912949.479 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:09:09.480Z,1478912949.480 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:09:09.480Z,1478912949.480 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:10:16.556Z,1478913016.556 [PNI_TCM](ERROR): CRC does not match. Expected:0x26788 got:0x29920
2016-11-12T01:10:30.926Z,1478913030.926 [PNI_TCM](ERROR): CRC does not match. Expected:0x19099 got:0x49148
2016-11-12T01:10:32.133Z,1478913032.133 [PNI_TCM](ERROR): CRC does not match. Expected:0x10668 got:0x6335
2016-11-12T01:10:35.342Z,1478913035.342 [PNI_TCM](ERROR): CRC does not match. Expected:0x37098 got:0x51229
2016-11-12T01:10:38.525Z,1478913038.525 [PNI_TCM](ERROR): CRC does not match. Expected:0x22002 got:0x23032
2016-11-12T01:10:40.126Z,1478913040.126 [PNI_TCM](ERROR): CRC does not match. Expected:0x62447 got:0x43919
2016-11-12T01:10:54.296Z,1478913054.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:10:55.092Z,1478913055.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:11:22.272Z,1478913082.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:11:23.068Z,1478913083.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:12:09.830Z,1478913129.829 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:12:09.830Z,1478913129.830 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 16
2016-11-12T01:12:09.830Z,1478913129.830 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:12:09.864Z,1478913129.864 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:12:10.261Z,1478913130.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:12:10.262Z,1478913130.261 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 16
2016-11-12T01:12:10.645Z,1478913130.645 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:12:10.646Z,1478913130.646 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:12:10.646Z,1478913130.646 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:13:16.132Z,1478913196.132 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T01:13:16.132Z,1478913196.132 [Default:CheckIn:C.Wait] Stopped
2016-11-12T01:13:16.132Z,1478913196.132 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T01:13:16.133Z,1478913196.133 [Default:CheckIn:D] Running Loop=1
2016-11-12T01:13:16.520Z,1478913196.520 [Default:CheckIn:D] Stopped
2016-11-12T01:13:16.520Z,1478913196.520 [Default:CheckIn:E] Running Loop=1
2016-11-12T01:13:16.912Z,1478913196.912 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1223.253516 min 
2016-11-12T01:13:16.912Z,1478913196.912 [Default:CheckIn:E] Stopped
2016-11-12T01:13:16.912Z,1478913196.912 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T01:13:16.912Z,1478913196.912 [Default:CheckIn] Stopped
2016-11-12T01:13:16.913Z,1478913196.913 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T01:13:16.913Z,1478913196.913 [Default:CheckIn](INFO): Running loop #119
2016-11-12T01:13:16.913Z,1478913196.913 [Default:CheckIn] Running Loop=119
2016-11-12T01:13:16.913Z,1478913196.913 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T01:13:16.913Z,1478913196.913 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T01:13:17.660Z,1478913197.660 [NAL9602](INFO): Powering up
2016-11-12T01:13:28.469Z,1478913208.469 [NAL9602](INFO): NAL9602 initialized
2016-11-12T01:13:36.056Z,1478913216.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:13:36.852Z,1478913216.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:14:00.469Z,1478913240.469 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-12T01:14:00.543Z,1478913240.543 [NAL9602](FAULT): received: 
+CSQ:0

OK9, 2, 0, 0, 0

OK
2016-11-12T01:14:00.543Z,1478913240.543 [NAL9602] Data Fault, FailCount= 1
2016-11-12T01:14:00.543Z,1478913240.543 [NAL9602](ERROR): Data Fault
2016-11-12T01:14:00.654Z,1478913240.654 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T01:14:00.881Z,1478913240.881 [NAL9602](INFO): Powering down
2016-11-12T01:14:01.754Z,1478913241.754 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T01:14:01.755Z,1478913241.755 [NAL9602] No Fault, FailCount= 1
2016-11-12T01:14:06.069Z,1478913246.069 [NAL9602](INFO): Powering up NAL9602
2016-11-12T01:14:17.277Z,1478913257.277 [NAL9602](INFO): NAL9602 initialized
2016-11-12T01:14:22.034Z,1478913262.034 [BPC1](ERROR): Failed to receive battery data
2016-11-12T01:14:22.034Z,1478913262.034 [BPC1] Communications Fault, FailCount= 1
2016-11-12T01:14:22.034Z,1478913262.034 [BPC1](ERROR): Communications Fault
2016-11-12T01:14:22.107Z,1478913262.107 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T01:14:23.292Z,1478913263.292 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:14:23.292Z,1478913263.293 [BPC1] No Fault, FailCount= 1
2016-11-12T01:15:10.855Z,1478913310.855 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:15:10.855Z,1478913310.855 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 17
2016-11-12T01:15:10.855Z,1478913310.855 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:15:10.872Z,1478913310.872 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:15:11.291Z,1478913311.291 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:15:11.291Z,1478913311.291 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 17
2016-11-12T01:15:11.669Z,1478913311.669 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:15:11.670Z,1478913311.670 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:15:11.670Z,1478913311.670 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:15:46.846Z,1478913346.846 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-12T01:15:50.454Z,1478913350.454 [PNI_TCM](ERROR): CRC does not match. Expected:0x10351 got:0x1857
2016-11-12T01:15:51.666Z,1478913351.666 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-12T01:15:59.643Z,1478913359.643 [PNI_TCM](ERROR): CRC does not match. Expected:0x14510 got:0x16962
2016-11-12T01:16:09.808Z,1478913369.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:16:10.604Z,1478913370.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:16:26.704Z,1478913386.704 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T01:17:23.302Z,1478913443.302 [NAL9602](INFO): SBD MO Status=2, MOMSN=369, MT Status=2, MTMSN=0
2016-11-12T01:17:23.302Z,1478913443.302 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-12T01:18:11.747Z,1478913491.747 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:18:11.747Z,1478913491.747 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 18
2016-11-12T01:18:11.747Z,1478913491.747 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:18:11.793Z,1478913491.793 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:18:12.183Z,1478913492.183 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:18:12.184Z,1478913492.184 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 18
2016-11-12T01:18:12.554Z,1478913492.554 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:18:12.555Z,1478913492.555 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:18:12.555Z,1478913492.556 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:18:16.992Z,1478913496.992 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T01:13:16.9Z
2016-11-12T01:18:16.993Z,1478913496.993 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T01:18:16.993Z,1478913496.993 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T01:18:21.861Z,1478913501.861 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0476.lzma
2016-11-12T01:18:22.650Z,1478913502.650 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0476.lzma.bak
2016-11-12T01:18:22.650Z,1478913502.650 [DataOverHttps](INFO): SBD MOMSN=4555943
2016-11-12T01:18:32.517Z,1478913512.517 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-12T01:18:32.625Z,1478913512.625 [DataOverHttps](INFO): Sending 238 bytes from file Logs/20161111T044527/Express0477.lzma
2016-11-12T01:18:33.422Z,1478913513.422 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0477.lzma.bak
2016-11-12T01:18:33.422Z,1478913513.422 [DataOverHttps](INFO): SBD MOMSN=4555945
2016-11-12T01:18:34.904Z,1478913514.904 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T01:18:34.904Z,1478913514.904 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T01:18:34.904Z,1478913514.904 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T01:18:38.364Z,1478913518.364 [NAL9602](INFO): Powering down
2016-11-12T01:18:56.941Z,1478913536.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.385400 seconds old.
2016-11-12T01:18:56.944Z,1478913536.944 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.385900 seconds old.
2016-11-12T01:18:56.946Z,1478913536.946 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.386100 seconds old.
2016-11-12T01:18:56.961Z,1478913536.961 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.398700 seconds old.
2016-11-12T01:18:56.975Z,1478913536.976 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.411100 seconds old.
2016-11-12T01:18:57.341Z,1478913537.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.784900 seconds old.
2016-11-12T01:18:57.343Z,1478913537.343 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.785500 seconds old.
2016-11-12T01:18:57.346Z,1478913537.346 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.785600 seconds old.
2016-11-12T01:18:57.348Z,1478913537.348 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.786100 seconds old.
2016-11-12T01:18:57.351Z,1478913537.351 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.786400 seconds old.
2016-11-12T01:18:57.532Z,1478913537.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:18:57.739Z,1478913537.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.183600 seconds old.
2016-11-12T01:18:57.742Z,1478913537.742 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.184100 seconds old.
2016-11-12T01:18:57.745Z,1478913537.745 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.184500 seconds old.
2016-11-12T01:18:57.747Z,1478913537.747 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.184900 seconds old.
2016-11-12T01:18:57.750Z,1478913537.750 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.185400 seconds old.
2016-11-12T01:18:58.141Z,1478913538.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.584900 seconds old.
2016-11-12T01:18:58.144Z,1478913538.144 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.585400 seconds old.
2016-11-12T01:18:58.146Z,1478913538.146 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.585600 seconds old.
2016-11-12T01:18:58.148Z,1478913538.148 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.586100 seconds old.
2016-11-12T01:18:58.151Z,1478913538.151 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.586400 seconds old.
2016-11-12T01:18:58.329Z,1478913538.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:18:58.556Z,1478913538.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.999800 seconds old.
2016-11-12T01:18:58.558Z,1478913538.558 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.000300 seconds old.
2016-11-12T01:18:58.565Z,1478913538.565 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 2.004800 seconds old.
2016-11-12T01:18:58.568Z,1478913538.568 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.005400 seconds old.
2016-11-12T01:18:58.570Z,1478913538.570 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 2.005800 seconds old.
2016-11-12T01:18:58.941Z,1478913538.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.385600 seconds old.
2016-11-12T01:18:58.944Z,1478913538.944 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.386400 seconds old.
2016-11-12T01:18:58.947Z,1478913538.947 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 2.386600 seconds old.
2016-11-12T01:18:58.949Z,1478913538.949 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.387200 seconds old.
2016-11-12T01:18:58.952Z,1478913538.952 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 2.387700 seconds old.
2016-11-12T01:18:59.349Z,1478913539.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.793400 seconds old.
2016-11-12T01:18:59.352Z,1478913539.352 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.794000 seconds old.
2016-11-12T01:18:59.354Z,1478913539.354 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 2.794200 seconds old.
2016-11-12T01:18:59.357Z,1478913539.357 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.794700 seconds old.
2016-11-12T01:18:59.359Z,1478913539.359 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 2.795000 seconds old.
2016-11-12T01:18:59.745Z,1478913539.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.188900 seconds old.
2016-11-12T01:18:59.748Z,1478913539.748 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.189500 seconds old.
2016-11-12T01:18:59.750Z,1478913539.750 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 3.189700 seconds old.
2016-11-12T01:18:59.752Z,1478913539.752 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.190200 seconds old.
2016-11-12T01:18:59.779Z,1478913539.779 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 3.190600 seconds old.
2016-11-12T01:19:00.151Z,1478913540.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.595000 seconds old.
2016-11-12T01:19:00.154Z,1478913540.154 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.595800 seconds old.
2016-11-12T01:19:00.156Z,1478913540.156 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 3.596200 seconds old.
2016-11-12T01:19:00.159Z,1478913540.159 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.596600 seconds old.
2016-11-12T01:19:00.162Z,1478913540.161 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 3.597100 seconds old.
2016-11-12T01:19:00.548Z,1478913540.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.991700 seconds old.
2016-11-12T01:19:00.550Z,1478913540.550 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.992200 seconds old.
2016-11-12T01:19:00.553Z,1478913540.553 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 3.992400 seconds old.
2016-11-12T01:19:00.555Z,1478913540.555 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.992900 seconds old.
2016-11-12T01:19:00.558Z,1478913540.558 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 3.993200 seconds old.
2016-11-12T01:19:00.941Z,1478913540.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.385400 seconds old.
2016-11-12T01:19:00.944Z,1478913540.944 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.385900 seconds old.
2016-11-12T01:19:00.946Z,1478913540.946 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 4.386100 seconds old.
2016-11-12T01:19:00.949Z,1478913540.949 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.386700 seconds old.
2016-11-12T01:19:00.951Z,1478913540.951 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 4.387000 seconds old.
2016-11-12T01:19:01.342Z,1478913541.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.786500 seconds old.
2016-11-12T01:19:01.345Z,1478913541.345 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.787100 seconds old.
2016-11-12T01:19:01.348Z,1478913541.348 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 4.787500 seconds old.
2016-11-12T01:19:01.350Z,1478913541.350 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.787900 seconds old.
2016-11-12T01:19:01.353Z,1478913541.353 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 4.788400 seconds old.
2016-11-12T01:19:01.750Z,1478913541.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.193800 seconds old.
2016-11-12T01:19:01.752Z,1478913541.753 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.194400 seconds old.
2016-11-12T01:19:01.755Z,1478913541.755 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 5.194600 seconds old.
2016-11-12T01:19:01.757Z,1478913541.757 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.195100 seconds old.
2016-11-12T01:19:01.760Z,1478913541.760 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 5.195400 seconds old.
2016-11-12T01:19:02.160Z,1478913542.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.604400 seconds old.
2016-11-12T01:19:02.167Z,1478913542.167 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.604900 seconds old.
2016-11-12T01:19:02.170Z,1478913542.170 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 5.609300 seconds old.
2016-11-12T01:19:02.194Z,1478913542.194 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.632100 seconds old.
2016-11-12T01:19:02.208Z,1478913542.208 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 5.643500 seconds old.
2016-11-12T01:19:02.539Z,1478913542.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.982900 seconds old.
2016-11-12T01:19:02.542Z,1478913542.542 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.983500 seconds old.
2016-11-12T01:19:02.544Z,1478913542.544 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 5.983900 seconds old.
2016-11-12T01:19:02.547Z,1478913542.546 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.984400 seconds old.
2016-11-12T01:19:02.549Z,1478913542.549 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 5.984800 seconds old.
2016-11-12T01:19:02.950Z,1478913542.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.394100 seconds old.
2016-11-12T01:19:02.953Z,1478913542.953 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.394600 seconds old.
2016-11-12T01:19:02.955Z,1478913542.955 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 6.394800 seconds old.
2016-11-12T01:19:02.957Z,1478913542.957 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.395400 seconds old.
2016-11-12T01:19:02.960Z,1478913542.960 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 6.395700 seconds old.
2016-11-12T01:19:03.353Z,1478913543.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.797000 seconds old.
2016-11-12T01:19:03.364Z,1478913543.364 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.805600 seconds old.
2016-11-12T01:19:03.366Z,1478913543.366 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 6.805900 seconds old.
2016-11-12T01:19:03.369Z,1478913543.369 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.806600 seconds old.
2016-11-12T01:19:03.371Z,1478913543.371 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 6.806900 seconds old.
2016-11-12T01:19:03.739Z,1478913543.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.183000 seconds old.
2016-11-12T01:19:03.746Z,1478913543.746 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.187700 seconds old.
2016-11-12T01:19:03.752Z,1478913543.752 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 7.192100 seconds old.
2016-11-12T01:19:03.755Z,1478913543.755 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.192600 seconds old.
2016-11-12T01:19:03.762Z,1478913543.761 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 7.197100 seconds old.
2016-11-12T01:19:04.144Z,1478913544.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.588500 seconds old.
2016-11-12T01:19:04.147Z,1478913544.147 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.588900 seconds old.
2016-11-12T01:19:04.149Z,1478913544.149 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 7.589100 seconds old.
2016-11-12T01:19:04.152Z,1478913544.152 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.589600 seconds old.
2016-11-12T01:19:04.154Z,1478913544.154 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 7.589900 seconds old.
2016-11-12T01:19:04.542Z,1478913544.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.986500 seconds old.
2016-11-12T01:19:04.549Z,1478913544.549 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.991200 seconds old.
2016-11-12T01:19:04.556Z,1478913544.556 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 7.995600 seconds old.
2016-11-12T01:19:04.558Z,1478913544.558 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.996200 seconds old.
2016-11-12T01:19:04.565Z,1478913544.565 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 8.000700 seconds old.
2016-11-12T01:19:04.940Z,1478913544.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.383800 seconds old.
2016-11-12T01:19:04.942Z,1478913544.942 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.384300 seconds old.
2016-11-12T01:19:04.949Z,1478913544.949 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 8.388700 seconds old.
2016-11-12T01:19:04.960Z,1478913544.960 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.397400 seconds old.
2016-11-12T01:19:04.962Z,1478913544.962 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 8.397800 seconds old.
2016-11-12T01:19:05.379Z,1478913545.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.823700 seconds old.
2016-11-12T01:19:05.382Z,1478913545.382 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.824200 seconds old.
2016-11-12T01:19:05.389Z,1478913545.389 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 8.828700 seconds old.
2016-11-12T01:19:05.391Z,1478913545.391 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.829200 seconds old.
2016-11-12T01:19:05.394Z,1478913545.394 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 8.829500 seconds old.
2016-11-12T01:19:05.768Z,1478913545.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.211800 seconds old.
2016-11-12T01:19:05.770Z,1478913545.770 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.212300 seconds old.
2016-11-12T01:19:05.777Z,1478913545.777 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 9.216700 seconds old.
2016-11-12T01:19:05.779Z,1478913545.779 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.217200 seconds old.
2016-11-12T01:19:05.782Z,1478913545.782 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 9.217600 seconds old.
2016-11-12T01:19:06.131Z,1478913546.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.574800 seconds old.
2016-11-12T01:19:06.133Z,1478913546.134 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.575400 seconds old.
2016-11-12T01:19:06.136Z,1478913546.136 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 9.575800 seconds old.
2016-11-12T01:19:06.138Z,1478913546.138 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.576300 seconds old.
2016-11-12T01:19:06.153Z,1478913546.153 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 9.588800 seconds old.
2016-11-12T01:19:06.557Z,1478913546.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.001400 seconds old.
2016-11-12T01:19:06.560Z,1478913546.560 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.002100 seconds old.
2016-11-12T01:19:06.562Z,1478913546.562 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 10.002200 seconds old.
2016-11-12T01:19:06.565Z,1478913546.565 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.002800 seconds old.
2016-11-12T01:19:06.568Z,1478913546.568 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 10.003100 seconds old.
2016-11-12T01:19:06.942Z,1478913546.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.385700 seconds old.
2016-11-12T01:19:06.945Z,1478913546.944 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.386400 seconds old.
2016-11-12T01:19:06.947Z,1478913546.947 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 10.386600 seconds old.
2016-11-12T01:19:06.950Z,1478913546.950 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.387300 seconds old.
2016-11-12T01:19:06.952Z,1478913546.952 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 10.387800 seconds old.
2016-11-12T01:19:07.372Z,1478913547.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.816200 seconds old.
2016-11-12T01:19:07.375Z,1478913547.375 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.816700 seconds old.
2016-11-12T01:19:07.377Z,1478913547.377 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 10.817100 seconds old.
2016-11-12T01:19:07.380Z,1478913547.380 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.817800 seconds old.
2016-11-12T01:19:07.383Z,1478913547.383 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 10.818100 seconds old.
2016-11-12T01:19:07.771Z,1478913547.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.215500 seconds old.
2016-11-12T01:19:07.774Z,1478913547.774 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.216000 seconds old.
2016-11-12T01:19:07.776Z,1478913547.776 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 11.216300 seconds old.
2016-11-12T01:19:07.779Z,1478913547.779 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.216700 seconds old.
2016-11-12T01:19:07.782Z,1478913547.782 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 11.217100 seconds old.
2016-11-12T01:19:08.151Z,1478913548.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.595300 seconds old.
2016-11-12T01:19:08.154Z,1478913548.154 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.596000 seconds old.
2016-11-12T01:19:08.157Z,1478913548.157 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 11.596400 seconds old.
2016-11-12T01:19:08.159Z,1478913548.159 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.596900 seconds old.
2016-11-12T01:19:08.162Z,1478913548.162 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 11.597400 seconds old.
2016-11-12T01:19:08.546Z,1478913548.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.990300 seconds old.
2016-11-12T01:19:08.549Z,1478913548.549 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.991000 seconds old.
2016-11-12T01:19:08.552Z,1478913548.552 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 11.991300 seconds old.
2016-11-12T01:19:08.554Z,1478913548.554 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.991800 seconds old.
2016-11-12T01:19:08.557Z,1478913548.557 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 11.992300 seconds old.
2016-11-12T01:19:08.951Z,1478913548.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 12.394900 seconds old.
2016-11-12T01:19:08.954Z,1478913548.954 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.395600 seconds old.
2016-11-12T01:19:08.956Z,1478913548.956 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 12.396000 seconds old.
2016-11-12T01:19:08.959Z,1478913548.959 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.396400 seconds old.
2016-11-12T01:19:08.961Z,1478913548.961 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 12.396800 seconds old.
2016-11-12T01:19:09.349Z,1478913549.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 12.793200 seconds old.
2016-11-12T01:19:09.356Z,1478913549.356 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.797900 seconds old.
2016-11-12T01:19:09.359Z,1478913549.359 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 12.798200 seconds old.
2016-11-12T01:19:09.365Z,1478913549.365 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.802900 seconds old.
2016-11-12T01:19:09.372Z,1478913549.372 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 12.807500 seconds old.
2016-11-12T01:19:09.791Z,1478913549.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 13.235700 seconds old.
2016-11-12T01:19:09.794Z,1478913549.794 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.236200 seconds old.
2016-11-12T01:19:09.805Z,1478913549.805 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 13.244600 seconds old.
2016-11-12T01:19:09.808Z,1478913549.807 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.245300 seconds old.
2016-11-12T01:19:09.810Z,1478913549.810 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 13.245600 seconds old.
2016-11-12T01:19:10.137Z,1478913550.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 13.581400 seconds old.
2016-11-12T01:19:10.140Z,1478913550.140 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.582000 seconds old.
2016-11-12T01:19:10.142Z,1478913550.142 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 13.582300 seconds old.
2016-11-12T01:19:10.145Z,1478913550.145 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.582900 seconds old.
2016-11-12T01:19:10.148Z,1478913550.148 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 13.583200 seconds old.
2016-11-12T01:19:10.542Z,1478913550.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 13.986500 seconds old.
2016-11-12T01:19:10.545Z,1478913550.545 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.987200 seconds old.
2016-11-12T01:19:10.548Z,1478913550.548 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 13.987600 seconds old.
2016-11-12T01:19:10.550Z,1478913550.550 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.988100 seconds old.
2016-11-12T01:19:10.553Z,1478913550.553 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 13.988600 seconds old.
2016-11-12T01:19:10.941Z,1478913550.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 14.384900 seconds old.
2016-11-12T01:19:10.944Z,1478913550.944 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 14.385600 seconds old.
2016-11-12T01:19:10.946Z,1478913550.946 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 14.385800 seconds old.
2016-11-12T01:19:10.949Z,1478913550.949 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 14.386500 seconds old.
2016-11-12T01:19:10.951Z,1478913550.951 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 14.387000 seconds old.
2016-11-12T01:19:11.347Z,1478913551.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 14.791600 seconds old.
2016-11-12T01:19:11.350Z,1478913551.350 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 14.792100 seconds old.
2016-11-12T01:19:11.353Z,1478913551.353 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 14.792400 seconds old.
2016-11-12T01:19:11.355Z,1478913551.355 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 14.792900 seconds old.
2016-11-12T01:19:11.358Z,1478913551.358 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 14.793200 seconds old.
2016-11-12T01:19:11.742Z,1478913551.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 15.186400 seconds old.
2016-11-12T01:19:11.745Z,1478913551.745 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.187100 seconds old.
2016-11-12T01:19:11.748Z,1478913551.748 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 15.187500 seconds old.
2016-11-12T01:19:11.750Z,1478913551.750 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 15.188000 seconds old.
2016-11-12T01:19:11.753Z,1478913551.753 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 15.188600 seconds old.
2016-11-12T01:19:12.140Z,1478913552.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 15.584200 seconds old.
2016-11-12T01:19:12.143Z,1478913552.143 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.584700 seconds old.
2016-11-12T01:19:12.145Z,1478913552.145 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 15.585100 seconds old.
2016-11-12T01:19:12.148Z,1478913552.148 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 15.585800 seconds old.
2016-11-12T01:19:12.151Z,1478913552.151 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 15.586100 seconds old.
2016-11-12T01:19:12.548Z,1478913552.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 15.992600 seconds old.
2016-11-12T01:19:12.551Z,1478913552.551 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.993100 seconds old.
2016-11-12T01:19:12.554Z,1478913552.554 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 15.993300 seconds old.
2016-11-12T01:19:12.556Z,1478913552.556 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 15.993900 seconds old.
2016-11-12T01:19:12.559Z,1478913552.559 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 15.994200 seconds old.
2016-11-12T01:19:12.951Z,1478913552.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 16.395200 seconds old.
2016-11-12T01:19:12.954Z,1478913552.954 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 16.396000 seconds old.
2016-11-12T01:19:12.957Z,1478913552.957 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 16.396400 seconds old.
2016-11-12T01:19:12.959Z,1478913552.959 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.396900 seconds old.
2016-11-12T01:19:12.962Z,1478913552.962 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 16.397400 seconds old.
2016-11-12T01:19:13.356Z,1478913553.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 16.799900 seconds old.
2016-11-12T01:19:13.359Z,1478913553.359 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 16.800400 seconds old.
2016-11-12T01:19:13.361Z,1478913553.361 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 16.800800 seconds old.
2016-11-12T01:19:13.364Z,1478913553.364 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.801500 seconds old.
2016-11-12T01:19:13.366Z,1478913553.366 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 16.801800 seconds old.
2016-11-12T01:19:13.756Z,1478913553.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 17.199900 seconds old.
2016-11-12T01:19:13.759Z,1478913553.759 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 17.200500 seconds old.
2016-11-12T01:19:13.761Z,1478913553.761 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 17.200800 seconds old.
2016-11-12T01:19:13.763Z,1478913553.763 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 17.201300 seconds old.
2016-11-12T01:19:13.766Z,1478913553.766 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 17.201600 seconds old.
2016-11-12T01:19:14.133Z,1478913554.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 17.577400 seconds old.
2016-11-12T01:19:14.148Z,1478913554.148 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 17.590100 seconds old.
2016-11-12T01:19:14.151Z,1478913554.151 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 17.590400 seconds old.
2016-11-12T01:19:14.157Z,1478913554.157 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 17.595100 seconds old.
2016-11-12T01:19:14.164Z,1478913554.164 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 17.599600 seconds old.
2016-11-12T01:19:14.535Z,1478913554.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 17.978700 seconds old.
2016-11-12T01:19:14.538Z,1478913554.537 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 17.979400 seconds old.
2016-11-12T01:19:14.540Z,1478913554.540 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 17.979800 seconds old.
2016-11-12T01:19:14.543Z,1478913554.543 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 17.980300 seconds old.
2016-11-12T01:19:14.561Z,1478913554.561 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 17.996800 seconds old.
2016-11-12T01:19:14.944Z,1478913554.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 18.387800 seconds old.
2016-11-12T01:19:14.946Z,1478913554.946 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 18.388300 seconds old.
2016-11-12T01:19:14.949Z,1478913554.949 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 18.388600 seconds old.
2016-11-12T01:19:14.967Z,1478913554.967 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 18.405200 seconds old.
2016-11-12T01:19:14.970Z,1478913554.970 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 18.405600 seconds old.
2016-11-12T01:19:15.339Z,1478913555.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 18.783400 seconds old.
2016-11-12T01:19:15.342Z,1478913555.342 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 18.784100 seconds old.
2016-11-12T01:19:15.345Z,1478913555.345 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 18.784500 seconds old.
2016-11-12T01:19:15.347Z,1478913555.347 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 18.785000 seconds old.
2016-11-12T01:19:15.350Z,1478913555.350 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 18.785500 seconds old.
2016-11-12T01:19:15.741Z,1478913555.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 19.185100 seconds old.
2016-11-12T01:19:15.744Z,1478913555.744 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 19.185800 seconds old.
2016-11-12T01:19:15.746Z,1478913555.746 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 19.186100 seconds old.
2016-11-12T01:19:15.749Z,1478913555.749 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 19.186800 seconds old.
2016-11-12T01:19:15.752Z,1478913555.752 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 19.187300 seconds old.
2016-11-12T01:19:16.142Z,1478913556.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 19.586100 seconds old.
2016-11-12T01:19:16.145Z,1478913556.145 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 19.586700 seconds old.
2016-11-12T01:19:16.147Z,1478913556.147 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 19.586900 seconds old.
2016-11-12T01:19:16.150Z,1478913556.150 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 19.587600 seconds old.
2016-11-12T01:19:16.181Z,1478913556.181 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 19.616000 seconds old.
2016-11-12T01:19:16.548Z,1478913556.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 19.991700 seconds old.
2016-11-12T01:19:16.550Z,1478913556.550 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 19.992200 seconds old.
2016-11-12T01:19:16.553Z,1478913556.553 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 19.992600 seconds old.
2016-11-12T01:19:16.555Z,1478913556.556 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 19.993300 seconds old.
2016-11-12T01:19:16.558Z,1478913556.558 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 19.993600 seconds old.
2016-11-12T01:19:16.943Z,1478913556.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 20.387000 seconds old.
2016-11-12T01:19:16.950Z,1478913556.950 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 20.391700 seconds old.
2016-11-12T01:19:16.956Z,1478913556.957 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 20.396200 seconds old.
2016-11-12T01:19:16.963Z,1478913556.963 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 20.396700 seconds old.
2016-11-12T01:19:16.966Z,1478913556.966 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 20.401300 seconds old.
2016-11-12T01:19:17.374Z,1478913557.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 20.817800 seconds old.
2016-11-12T01:19:17.408Z,1478913557.408 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 20.849700 seconds old.
2016-11-12T01:19:17.410Z,1478913557.410 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 20.850200 seconds old.
2016-11-12T01:19:17.424Z,1478913557.424 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 20.857000 seconds old.
2016-11-12T01:19:17.426Z,1478913557.426 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 20.861800 seconds old.
2016-11-12T01:19:17.734Z,1478913557.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 21.178600 seconds old.
2016-11-12T01:19:17.738Z,1478913557.738 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 21.180200 seconds old.
2016-11-12T01:19:17.741Z,1478913557.741 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 21.180900 seconds old.
2016-11-12T01:19:17.760Z,1478913557.760 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 21.197600 seconds old.
2016-11-12T01:19:17.762Z,1478913557.762 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 21.198000 seconds old.
2016-11-12T01:19:18.138Z,1478913558.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 21.582400 seconds old.
2016-11-12T01:19:18.142Z,1478913558.142 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 21.584000 seconds old.
2016-11-12T01:19:18.145Z,1478913558.145 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 21.584500 seconds old.
2016-11-12T01:19:18.188Z,1478913558.188 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 21.585000 seconds old.
2016-11-12T01:19:18.209Z,1478913558.209 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 21.644700 seconds old.
2016-11-12T01:19:18.542Z,1478913558.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 21.986400 seconds old.
2016-11-12T01:19:18.546Z,1478913558.546 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 21.987800 seconds old.
2016-11-12T01:19:18.548Z,1478913558.548 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 21.988100 seconds old.
2016-11-12T01:19:18.551Z,1478913558.551 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 21.988600 seconds old.
2016-11-12T01:19:18.554Z,1478913558.554 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 21.989100 seconds old.
2016-11-12T01:19:18.942Z,1478913558.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 22.386100 seconds old.
2016-11-12T01:19:18.945Z,1478913558.945 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 22.386700 seconds old.
2016-11-12T01:19:18.948Z,1478913558.948 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 22.386900 seconds old.
2016-11-12T01:19:18.951Z,1478913558.951 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 22.388400 seconds old.
2016-11-12T01:19:18.953Z,1478913558.953 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 22.388900 seconds old.
2016-11-12T01:19:19.338Z,1478913559.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 22.781800 seconds old.
2016-11-12T01:19:19.341Z,1478913559.341 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 22.782500 seconds old.
2016-11-12T01:19:19.343Z,1478913559.343 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 22.782700 seconds old.
2016-11-12T01:19:19.346Z,1478913559.346 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 22.783400 seconds old.
2016-11-12T01:19:19.348Z,1478913559.348 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 22.784000 seconds old.
2016-11-12T01:19:19.781Z,1478913559.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 23.224900 seconds old.
2016-11-12T01:19:19.784Z,1478913559.784 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 23.225500 seconds old.
2016-11-12T01:19:19.786Z,1478913559.786 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 23.225700 seconds old.
2016-11-12T01:19:19.797Z,1478913559.797 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 23.234400 seconds old.
2016-11-12T01:19:19.799Z,1478913559.799 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 23.235000 seconds old.
2016-11-12T01:19:20.135Z,1478913560.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 23.579600 seconds old.
2016-11-12T01:19:20.138Z,1478913560.138 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 23.580100 seconds old.
2016-11-12T01:19:20.182Z,1478913560.182 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 23.621400 seconds old.
2016-11-12T01:19:20.194Z,1478913560.194 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 23.631500 seconds old.
2016-11-12T01:19:20.215Z,1478913560.215 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 23.650300 seconds old.
2016-11-12T01:19:20.568Z,1478913560.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 24.012600 seconds old.
2016-11-12T01:19:20.571Z,1478913560.571 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 24.013100 seconds old.
2016-11-12T01:19:20.574Z,1478913560.574 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 24.013500 seconds old.
2016-11-12T01:19:20.576Z,1478913560.576 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 24.014200 seconds old.
2016-11-12T01:19:20.579Z,1478913560.579 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 24.014500 seconds old.
2016-11-12T01:19:20.943Z,1478913560.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 24.387600 seconds old.
2016-11-12T01:19:20.946Z,1478913560.946 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 24.388100 seconds old.
2016-11-12T01:19:20.977Z,1478913560.977 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 24.416300 seconds old.
2016-11-12T01:19:20.979Z,1478913560.979 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 24.416800 seconds old.
2016-11-12T01:19:20.982Z,1478913560.982 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 24.417200 seconds old.
2016-11-12T01:19:21.365Z,1478913561.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 24.808900 seconds old.
2016-11-12T01:19:21.368Z,1478913561.368 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 24.809400 seconds old.
2016-11-12T01:19:21.370Z,1478913561.370 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 24.809600 seconds old.
2016-11-12T01:19:21.373Z,1478913561.373 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 24.811200 seconds old.
2016-11-12T01:19:21.376Z,1478913561.376 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 24.811700 seconds old.
2016-11-12T01:19:21.776Z,1478913561.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 25.220600 seconds old.
2016-11-12T01:19:21.779Z,1478913561.779 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 25.221100 seconds old.
2016-11-12T01:19:21.782Z,1478913561.782 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 25.221500 seconds old.
2016-11-12T01:19:21.784Z,1478913561.784 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 25.222200 seconds old.
2016-11-12T01:19:21.787Z,1478913561.787 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 25.222500 seconds old.
2016-11-12T01:19:22.140Z,1478913562.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 25.584200 seconds old.
2016-11-12T01:19:22.172Z,1478913562.172 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 25.584700 seconds old.
2016-11-12T01:19:22.176Z,1478913562.176 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 25.615300 seconds old.
2016-11-12T01:19:22.181Z,1478913562.181 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 25.618900 seconds old.
2016-11-12T01:19:22.204Z,1478913562.204 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 25.639300 seconds old.
2016-11-12T01:19:22.550Z,1478913562.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 25.994400 seconds old.
2016-11-12T01:19:22.553Z,1478913562.553 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 25.994900 seconds old.
2016-11-12T01:19:22.555Z,1478913562.555 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 25.995200 seconds old.
2016-11-12T01:19:22.558Z,1478913562.558 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 25.995700 seconds old.
2016-11-12T01:19:22.561Z,1478913562.560 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 25.996000 seconds old.
2016-11-12T01:19:22.936Z,1478913562.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 26.380200 seconds old.
2016-11-12T01:19:22.939Z,1478913562.939 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 26.380700 seconds old.
2016-11-12T01:19:22.957Z,1478913562.957 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 26.397100 seconds old.
2016-11-12T01:19:22.964Z,1478913562.964 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 26.401900 seconds old.
2016-11-12T01:19:22.967Z,1478913562.967 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 26.402200 seconds old.
2016-11-12T01:19:23.337Z,1478913563.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 26.781500 seconds old.
2016-11-12T01:19:23.340Z,1478913563.340 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 26.782000 seconds old.
2016-11-12T01:19:23.343Z,1478913563.342 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 26.782200 seconds old.
2016-11-12T01:19:23.345Z,1478913563.345 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 26.782700 seconds old.
2016-11-12T01:19:23.372Z,1478913563.372 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 26.807200 seconds old.
2016-11-12T01:19:23.738Z,1478913563.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 27.181700 seconds old.
2016-11-12T01:19:23.740Z,1478913563.740 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 27.182200 seconds old.
2016-11-12T01:19:23.743Z,1478913563.743 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 27.182400 seconds old.
2016-11-12T01:19:23.745Z,1478913563.745 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 27.183000 seconds old.
2016-11-12T01:19:23.748Z,1478913563.748 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 27.183400 seconds old.
2016-11-12T01:19:24.137Z,1478913564.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 27.580900 seconds old.
2016-11-12T01:19:24.140Z,1478913564.140 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 27.581600 seconds old.
2016-11-12T01:19:24.142Z,1478913564.142 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 27.581800 seconds old.
2016-11-12T01:19:24.145Z,1478913564.145 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 27.582400 seconds old.
2016-11-12T01:19:24.147Z,1478913564.147 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 27.582900 seconds old.
2016-11-12T01:19:24.543Z,1478913564.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 27.987600 seconds old.
2016-11-12T01:19:24.546Z,1478913564.546 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 27.988100 seconds old.
2016-11-12T01:19:24.549Z,1478913564.549 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 27.988400 seconds old.
2016-11-12T01:19:24.551Z,1478913564.551 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 27.988900 seconds old.
2016-11-12T01:19:24.554Z,1478913564.554 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 27.989200 seconds old.
2016-11-12T01:19:24.943Z,1478913564.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 28.387600 seconds old.
2016-11-12T01:19:24.946Z,1478913564.946 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 28.388100 seconds old.
2016-11-12T01:19:24.949Z,1478913564.949 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 28.388300 seconds old.
2016-11-12T01:19:24.951Z,1478913564.951 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 28.388800 seconds old.
2016-11-12T01:19:24.954Z,1478913564.954 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 28.389100 seconds old.
2016-11-12T01:19:25.342Z,1478913565.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 28.785700 seconds old.
2016-11-12T01:19:25.345Z,1478913565.345 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 28.786500 seconds old.
2016-11-12T01:19:25.347Z,1478913565.347 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 28.786700 seconds old.
2016-11-12T01:19:25.350Z,1478913565.349 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 28.787400 seconds old.
2016-11-12T01:19:25.352Z,1478913565.352 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 28.787900 seconds old.
2016-11-12T01:19:25.747Z,1478913565.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 29.191300 seconds old.
2016-11-12T01:19:25.750Z,1478913565.750 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 29.191900 seconds old.
2016-11-12T01:19:25.752Z,1478913565.752 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 29.192200 seconds old.
2016-11-12T01:19:25.755Z,1478913565.755 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 29.192600 seconds old.
2016-11-12T01:19:25.757Z,1478913565.757 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 29.193100 seconds old.
2016-11-12T01:19:26.148Z,1478913566.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 29.592100 seconds old.
2016-11-12T01:19:26.151Z,1478913566.151 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 29.592600 seconds old.
2016-11-12T01:19:26.154Z,1478913566.154 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 29.593200 seconds old.
2016-11-12T01:19:26.156Z,1478913566.156 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 29.593900 seconds old.
2016-11-12T01:19:26.159Z,1478913566.159 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 29.594100 seconds old.
2016-11-12T01:19:26.548Z,1478913566.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 29.992100 seconds old.
2016-11-12T01:19:26.551Z,1478913566.551 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 29.992500 seconds old.
2016-11-12T01:19:26.553Z,1478913566.553 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 29.992900 seconds old.
2016-11-12T01:19:26.556Z,1478913566.556 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 29.993600 seconds old.
2016-11-12T01:19:26.558Z,1478913566.558 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 29.993900 seconds old.
2016-11-12T01:19:26.955Z,1478913566.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 30.399400 seconds old.
2016-11-12T01:19:26.958Z,1478913566.958 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 30.400000 seconds old.
2016-11-12T01:19:26.961Z,1478913566.961 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 30.400300 seconds old.
2016-11-12T01:19:26.963Z,1478913566.963 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 30.400800 seconds old.
2016-11-12T01:19:26.966Z,1478913566.966 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 30.401100 seconds old.
2016-11-12T01:19:27.356Z,1478913567.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 30.800400 seconds old.
2016-11-12T01:19:27.359Z,1478913567.359 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 30.801000 seconds old.
2016-11-12T01:19:27.361Z,1478913567.362 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 30.801200 seconds old.
2016-11-12T01:19:27.364Z,1478913567.364 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 30.801700 seconds old.
2016-11-12T01:19:27.366Z,1478913567.366 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 30.802000 seconds old.
2016-11-12T01:19:27.756Z,1478913567.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 31.200000 seconds old.
2016-11-12T01:19:27.759Z,1478913567.759 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 31.200500 seconds old.
2016-11-12T01:19:27.761Z,1478913567.761 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 31.200900 seconds old.
2016-11-12T01:19:27.764Z,1478913567.764 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 31.201700 seconds old.
2016-11-12T01:19:27.766Z,1478913567.766 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 31.202000 seconds old.
2016-11-12T01:19:28.153Z,1478913568.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 31.597500 seconds old.
2016-11-12T01:19:28.156Z,1478913568.156 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 31.598000 seconds old.
2016-11-12T01:19:28.159Z,1478913568.158 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 31.598200 seconds old.
2016-11-12T01:19:28.161Z,1478913568.161 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 31.598700 seconds old.
2016-11-12T01:19:28.164Z,1478913568.164 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 31.599100 seconds old.
2016-11-12T01:19:28.557Z,1478913568.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 32.001300 seconds old.
2016-11-12T01:19:28.560Z,1478913568.560 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 32.001800 seconds old.
2016-11-12T01:19:28.562Z,1478913568.562 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 32.002000 seconds old.
2016-11-12T01:19:28.565Z,1478913568.565 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 32.002600 seconds old.
2016-11-12T01:19:28.567Z,1478913568.567 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 32.003000 seconds old.
2016-11-12T01:19:28.939Z,1478913568.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 32.383200 seconds old.
2016-11-12T01:19:28.942Z,1478913568.942 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 32.383900 seconds old.
2016-11-12T01:19:28.945Z,1478913568.945 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 32.384400 seconds old.
2016-11-12T01:19:28.947Z,1478913568.947 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 32.384900 seconds old.
2016-11-12T01:19:28.950Z,1478913568.950 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 32.385400 seconds old.
2016-11-12T01:19:29.346Z,1478913569.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 32.790200 seconds old.
2016-11-12T01:19:29.349Z,1478913569.349 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 32.790800 seconds old.
2016-11-12T01:19:29.351Z,1478913569.351 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 32.791000 seconds old.
2016-11-12T01:19:29.354Z,1478913569.354 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 32.791500 seconds old.
2016-11-12T01:19:29.356Z,1478913569.356 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 32.792000 seconds old.
2016-11-12T01:19:29.743Z,1478913569.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 33.187700 seconds old.
2016-11-12T01:19:29.746Z,1478913569.746 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 33.188200 seconds old.
2016-11-12T01:19:29.749Z,1478913569.749 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 33.188400 seconds old.
2016-11-12T01:19:29.751Z,1478913569.751 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 33.188900 seconds old.
2016-11-12T01:19:29.754Z,1478913569.754 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 33.189300 seconds old.
2016-11-12T01:19:30.194Z,1478913570.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 33.638500 seconds old.
2016-11-12T01:19:30.206Z,1478913570.206 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 33.647600 seconds old.
2016-11-12T01:19:30.218Z,1478913570.218 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 33.658000 seconds old.
2016-11-12T01:19:30.229Z,1478913570.229 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 33.666800 seconds old.
2016-11-12T01:19:30.240Z,1478913570.240 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 33.675400 seconds old.
2016-11-12T01:19:30.550Z,1478913570.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 33.993900 seconds old.
2016-11-12T01:19:30.553Z,1478913570.553 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 33.994400 seconds old.
2016-11-12T01:19:30.555Z,1478913570.555 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 33.994700 seconds old.
2016-11-12T01:19:30.558Z,1478913570.557 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 33.995300 seconds old.
2016-11-12T01:19:30.560Z,1478913570.560 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 33.995600 seconds old.
2016-11-12T01:19:30.951Z,1478913570.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 34.395600 seconds old.
2016-11-12T01:19:30.954Z,1478913570.954 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 34.396200 seconds old.
2016-11-12T01:19:30.957Z,1478913570.957 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 34.396400 seconds old.
2016-11-12T01:19:30.959Z,1478913570.959 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 34.396900 seconds old.
2016-11-12T01:19:30.962Z,1478913570.962 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 34.397500 seconds old.
2016-11-12T01:19:31.352Z,1478913571.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 34.795700 seconds old.
2016-11-12T01:19:31.354Z,1478913571.354 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 34.796300 seconds old.
2016-11-12T01:19:31.357Z,1478913571.357 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 34.796700 seconds old.
2016-11-12T01:19:31.360Z,1478913571.360 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 34.797400 seconds old.
2016-11-12T01:19:31.362Z,1478913571.362 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 34.797900 seconds old.
2016-11-12T01:19:31.735Z,1478913571.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 35.179400 seconds old.
2016-11-12T01:19:31.738Z,1478913571.738 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 35.180200 seconds old.
2016-11-12T01:19:31.741Z,1478913571.741 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 35.180500 seconds old.
2016-11-12T01:19:31.755Z,1478913571.755 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 35.181000 seconds old.
2016-11-12T01:19:31.764Z,1478913571.764 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 35.199200 seconds old.
2016-11-12T01:19:32.229Z,1478913572.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 35.672900 seconds old.
2016-11-12T01:19:32.232Z,1478913572.232 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 35.673600 seconds old.
2016-11-12T01:19:32.234Z,1478913572.234 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 35.673800 seconds old.
2016-11-12T01:19:32.241Z,1478913572.241 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 35.678800 seconds old.
2016-11-12T01:19:32.248Z,1478913572.248 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 35.683500 seconds old.
2016-11-12T01:19:32.543Z,1478913572.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 35.986700 seconds old.
2016-11-12T01:19:32.545Z,1478913572.546 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 35.987400 seconds old.
2016-11-12T01:19:32.548Z,1478913572.548 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 35.987800 seconds old.
2016-11-12T01:19:32.550Z,1478913572.550 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 35.988300 seconds old.
2016-11-12T01:19:32.553Z,1478913572.553 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 35.988900 seconds old.
2016-11-12T01:19:32.947Z,1478913572.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 36.391600 seconds old.
2016-11-12T01:19:32.950Z,1478913572.950 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 36.392100 seconds old.
2016-11-12T01:19:32.953Z,1478913572.953 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 36.392400 seconds old.
2016-11-12T01:19:32.955Z,1478913572.955 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 36.392900 seconds old.
2016-11-12T01:19:32.958Z,1478913572.958 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 36.393200 seconds old.
2016-11-12T01:19:33.337Z,1478913573.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 36.781300 seconds old.
2016-11-12T01:19:33.340Z,1478913573.340 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 36.782000 seconds old.
2016-11-12T01:19:33.342Z,1478913573.342 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 36.782200 seconds old.
2016-11-12T01:19:33.345Z,1478913573.345 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 36.782700 seconds old.
2016-11-12T01:19:33.348Z,1478913573.348 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 36.783100 seconds old.
2016-11-12T01:19:33.764Z,1478913573.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 37.207800 seconds old.
2016-11-12T01:19:33.766Z,1478913573.766 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 37.208300 seconds old.
2016-11-12T01:19:33.789Z,1478913573.789 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 37.228900 seconds old.
2016-11-12T01:19:33.796Z,1478913573.796 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 37.233500 seconds old.
2016-11-12T01:19:33.798Z,1478913573.798 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 37.233900 seconds old.
2016-11-12T01:19:34.206Z,1478913574.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 37.650600 seconds old.
2016-11-12T01:19:34.226Z,1478913574.226 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 37.667600 seconds old.
2016-11-12T01:19:34.236Z,1478913574.236 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 37.676100 seconds old.
2016-11-12T01:19:34.239Z,1478913574.239 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 37.676700 seconds old.
2016-11-12T01:19:34.250Z,1478913574.250 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 37.685300 seconds old.
2016-11-12T01:19:34.537Z,1478913574.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 37.981400 seconds old.
2016-11-12T01:19:34.540Z,1478913574.540 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 37.981900 seconds old.
2016-11-12T01:19:34.542Z,1478913574.542 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 37.982100 seconds old.
2016-11-12T01:19:34.545Z,1478913574.545 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 37.982600 seconds old.
2016-11-12T01:19:34.547Z,1478913574.547 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 37.982900 seconds old.
2016-11-12T01:19:34.938Z,1478913574.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 38.382100 seconds old.
2016-11-12T01:19:34.941Z,1478913574.941 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 38.382800 seconds old.
2016-11-12T01:19:34.943Z,1478913574.944 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 38.383200 seconds old.
2016-11-12T01:19:34.946Z,1478913574.946 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 38.383700 seconds old.
2016-11-12T01:19:34.949Z,1478913574.949 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 38.384300 seconds old.
2016-11-12T01:19:35.379Z,1478913575.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 38.822600 seconds old.
2016-11-12T01:19:35.381Z,1478913575.381 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 38.823200 seconds old.
2016-11-12T01:19:35.384Z,1478913575.384 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 38.823500 seconds old.
2016-11-12T01:19:35.386Z,1478913575.386 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 38.824000 seconds old.
2016-11-12T01:19:35.389Z,1478913575.389 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 38.824400 seconds old.
2016-11-12T01:19:38.787Z,1478913578.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 42.230800 seconds old.
2016-11-12T01:19:38.790Z,1478913578.790 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 42.231500 seconds old.
2016-11-12T01:19:38.792Z,1478913578.792 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 42.232000 seconds old.
2016-11-12T01:19:38.795Z,1478913578.795 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 42.232500 seconds old.
2016-11-12T01:19:38.797Z,1478913578.797 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 42.232800 seconds old.
2016-11-12T01:19:38.947Z,1478913578.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 42.391800 seconds old.
2016-11-12T01:19:38.950Z,1478913578.950 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 42.392300 seconds old.
2016-11-12T01:19:38.953Z,1478913578.953 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 42.392700 seconds old.
2016-11-12T01:19:38.956Z,1478913578.955 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 42.393300 seconds old.
2016-11-12T01:19:38.958Z,1478913578.958 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 42.393600 seconds old.
2016-11-12T01:19:39.289Z,1478913579.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 42.733000 seconds old.
2016-11-12T01:19:39.292Z,1478913579.292 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 42.733700 seconds old.
2016-11-12T01:19:39.294Z,1478913579.294 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 42.733900 seconds old.
2016-11-12T01:19:39.297Z,1478913579.297 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 42.734500 seconds old.
2016-11-12T01:19:39.299Z,1478913579.299 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 42.734900 seconds old.
2016-11-12T01:19:39.690Z,1478913579.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 43.134400 seconds old.
2016-11-12T01:19:39.693Z,1478913579.693 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 43.135400 seconds old.
2016-11-12T01:19:39.696Z,1478913579.696 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 43.135800 seconds old.
2016-11-12T01:19:39.698Z,1478913579.698 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 43.136300 seconds old.
2016-11-12T01:19:39.701Z,1478913579.701 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 43.136800 seconds old.
2016-11-12T01:19:45.249Z,1478913585.249 [PNI_TCM](ERROR): CRC does not match. Expected:0x44621 got:0x64283
2016-11-12T01:19:54.449Z,1478913594.449 [PNI_TCM](ERROR): CRC does not match. Expected:0x25423 got:0x1857
2016-11-12T01:20:19.663Z,1478913619.663 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T01:20:19.663Z,1478913619.663 [BPC1] Data Fault, FailCount= 1
2016-11-12T01:20:19.664Z,1478913619.664 [BPC1](ERROR): Data Fault
2016-11-12T01:20:19.731Z,1478913619.731 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T01:20:20.888Z,1478913620.888 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:20:20.888Z,1478913620.888 [BPC1] No Fault, FailCount= 1
2016-11-12T01:21:12.890Z,1478913672.890 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:21:12.890Z,1478913672.890 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 19
2016-11-12T01:21:12.890Z,1478913672.890 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:21:12.925Z,1478913672.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:21:13.314Z,1478913673.314 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:21:13.314Z,1478913673.314 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 19
2016-11-12T01:21:13.697Z,1478913673.697 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:21:13.697Z,1478913673.697 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:21:13.697Z,1478913673.697 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:21:31.284Z,1478913691.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:21:32.080Z,1478913692.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:22:26.843Z,1478913746.843 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T01:22:26.843Z,1478913746.843 [BPC1] Data Fault, FailCount= 1
2016-11-12T01:22:26.843Z,1478913746.843 [BPC1](ERROR): Data Fault
2016-11-12T01:22:26.908Z,1478913746.908 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T01:22:28.115Z,1478913748.115 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:22:28.115Z,1478913748.115 [BPC1] No Fault, FailCount= 1
2016-11-12T01:23:35.144Z,1478913815.144 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T01:23:35.145Z,1478913815.145 [Default:CheckIn:C.Wait] Stopped
2016-11-12T01:23:35.145Z,1478913815.145 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T01:23:35.145Z,1478913815.145 [Default:CheckIn:D] Running Loop=1
2016-11-12T01:23:35.551Z,1478913815.551 [Default:CheckIn:D] Stopped
2016-11-12T01:23:35.551Z,1478913815.551 [Default:CheckIn:E] Running Loop=1
2016-11-12T01:23:36.005Z,1478913816.006 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1233.570703 min 
2016-11-12T01:23:36.006Z,1478913816.006 [Default:CheckIn:E] Stopped
2016-11-12T01:23:36.006Z,1478913816.006 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T01:23:36.006Z,1478913816.006 [Default:CheckIn] Stopped
2016-11-12T01:23:36.006Z,1478913816.006 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T01:23:36.006Z,1478913816.006 [Default:CheckIn](INFO): Running loop #120
2016-11-12T01:23:36.007Z,1478913816.007 [Default:CheckIn] Running Loop=120
2016-11-12T01:23:36.007Z,1478913816.007 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T01:23:36.007Z,1478913816.007 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T01:23:36.697Z,1478913816.697 [NAL9602](INFO): Powering up
2016-11-12T01:23:47.830Z,1478913827.830 [NAL9602](INFO): NAL9602 initialized
2016-11-12T01:23:48.609Z,1478913828.609 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-12T01:23:48.609Z,1478913828.609 [NAL9602] Data Fault, FailCount= 2
2016-11-12T01:23:48.609Z,1478913828.609 [NAL9602](ERROR): Data Fault
2016-11-12T01:23:48.701Z,1478913828.701 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T01:23:49.013Z,1478913829.013 [NAL9602](INFO): Powering down
2016-11-12T01:23:49.971Z,1478913829.971 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T01:23:49.971Z,1478913829.971 [NAL9602] No Fault, FailCount= 2
2016-11-12T01:23:54.249Z,1478913834.249 [NAL9602](INFO): Powering up NAL9602
2016-11-12T01:23:57.434Z,1478913837.434 [BPC1](ERROR): Failed to receive battery data
2016-11-12T01:23:57.434Z,1478913837.434 [BPC1] Communications Fault, FailCount= 1
2016-11-12T01:23:57.434Z,1478913837.434 [BPC1](ERROR): Communications Fault
2016-11-12T01:23:57.520Z,1478913837.520 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T01:23:58.688Z,1478913838.688 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:23:58.688Z,1478913838.688 [BPC1] No Fault, FailCount= 1
2016-11-12T01:24:04.292Z,1478913844.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:24:05.088Z,1478913845.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:24:05.409Z,1478913845.409 [NAL9602](INFO): NAL9602 initialized
2016-11-12T01:24:12.640Z,1478913852.639 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T01:24:12.640Z,1478913852.640 [BPC1] Data Fault, FailCount= 2
2016-11-12T01:24:12.640Z,1478913852.640 [BPC1](ERROR): Data Fault
2016-11-12T01:24:12.711Z,1478913852.711 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T01:24:13.859Z,1478913853.859 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:24:13.879Z,1478913853.879 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 20
2016-11-12T01:24:13.879Z,1478913853.879 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:24:13.906Z,1478913853.906 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:24:13.906Z,1478913853.906 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:24:13.906Z,1478913853.906 [BPC1] No Fault, FailCount= 2
2016-11-12T01:24:14.350Z,1478913854.350 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:24:14.350Z,1478913854.350 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 20
2016-11-12T01:24:14.692Z,1478913854.691 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:24:14.692Z,1478913854.692 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:24:14.692Z,1478913854.692 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:25:18.610Z,1478913918.610 [BPC1](ERROR): Failed to parse message.
2016-11-12T01:25:18.610Z,1478913918.610 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T01:25:18.610Z,1478913918.610 [BPC1] Data Fault, FailCount= 1
2016-11-12T01:25:18.610Z,1478913918.610 [BPC1](ERROR): Data Fault
2016-11-12T01:25:18.704Z,1478913918.704 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T01:25:19.870Z,1478913919.870 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:25:19.870Z,1478913919.870 [BPC1] No Fault, FailCount= 1
2016-11-12T01:25:26.590Z,1478913926.590 [NAL9602](INFO): SBD MO Status=2, MOMSN=369, MT Status=2, MTMSN=0
2016-11-12T01:25:26.590Z,1478913926.590 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-12T01:26:27.020Z,1478913987.020 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T01:26:52.781Z,1478914012.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:26:53.576Z,1478914013.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:27:06.769Z,1478914026.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:27:07.564Z,1478914027.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:27:15.068Z,1478914035.069 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:27:15.069Z,1478914035.069 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 21
2016-11-12T01:27:15.069Z,1478914035.069 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:27:15.112Z,1478914035.112 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:27:15.563Z,1478914035.563 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:27:15.567Z,1478914035.567 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 21
2016-11-12T01:27:15.881Z,1478914035.881 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:27:15.882Z,1478914035.882 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:27:15.882Z,1478914035.882 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:28:36.180Z,1478914116.180 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T01:23:36.0Z
2016-11-12T01:28:36.180Z,1478914116.180 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T01:28:36.181Z,1478914116.181 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T01:28:41.151Z,1478914121.151 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0480.lzma
2016-11-12T01:28:41.942Z,1478914121.942 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0480.lzma.bak
2016-11-12T01:28:41.942Z,1478914121.943 [DataOverHttps](INFO): SBD MOMSN=4555950
2016-11-12T01:28:52.153Z,1478914132.153 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20161111T044527/Express0481.lzma
2016-11-12T01:28:52.922Z,1478914132.922 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0481.lzma.bak
2016-11-12T01:28:52.922Z,1478914132.922 [DataOverHttps](INFO): SBD MOMSN=4555952
2016-11-12T01:28:54.361Z,1478914134.361 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T01:28:54.361Z,1478914134.361 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T01:28:54.361Z,1478914134.361 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T01:28:59.178Z,1478914139.178 [PNI_TCM](ERROR): CRC does not match. Expected:0x40953 got:0x17019
2016-11-12T01:28:59.582Z,1478914139.582 [PNI_TCM](ERROR): CRC does not match. Expected:0x24924 got:0x248
2016-11-12T01:29:02.382Z,1478914142.382 [PNI_TCM](ERROR): CRC does not match. Expected:0x64041 got:0x3457
2016-11-12T01:29:05.586Z,1478914145.586 [PNI_TCM](ERROR): CRC does not match. Expected:0x28873 got:0x60928
2016-11-12T01:29:08.745Z,1478914148.745 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-12T01:29:14.344Z,1478914154.344 [NAL9602](INFO): Powering down
2016-11-12T01:29:40.496Z,1478914180.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:29:41.292Z,1478914181.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:30:16.065Z,1478914216.065 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:30:16.065Z,1478914216.065 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 22
2016-11-12T01:30:16.065Z,1478914216.065 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:30:16.079Z,1478914216.079 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:30:16.476Z,1478914216.476 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:30:16.477Z,1478914216.477 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 22
2016-11-12T01:30:16.876Z,1478914216.875 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:30:16.876Z,1478914216.876 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:30:16.876Z,1478914216.876 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:30:41.234Z,1478914241.234 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T01:30:41.234Z,1478914241.234 [BPC1] Data Fault, FailCount= 1
2016-11-12T01:30:41.235Z,1478914241.234 [BPC1](ERROR): Data Fault
2016-11-12T01:30:41.305Z,1478914241.305 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T01:30:42.463Z,1478914242.463 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:30:42.463Z,1478914242.463 [BPC1] No Fault, FailCount= 1
2016-11-12T01:31:40.533Z,1478914300.533 [PNI_TCM](ERROR): CRC does not match. Expected:0x34128 got:0x16962
2016-11-12T01:31:46.925Z,1478914306.925 [PNI_TCM](ERROR): CRC does not match. Expected:0x37942 got:0x51724
2016-11-12T01:32:14.268Z,1478914334.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:32:15.064Z,1478914335.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:32:25.713Z,1478914345.713 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T01:32:25.713Z,1478914345.713 [BPC1] Data Fault, FailCount= 1
2016-11-12T01:32:25.713Z,1478914345.713 [BPC1](ERROR): Data Fault
2016-11-12T01:32:25.766Z,1478914345.766 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T01:32:26.971Z,1478914346.971 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:32:26.971Z,1478914346.971 [BPC1] No Fault, FailCount= 1
2016-11-12T01:33:17.242Z,1478914397.242 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:33:17.242Z,1478914397.242 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 23
2016-11-12T01:33:17.242Z,1478914397.242 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:33:17.280Z,1478914397.280 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:33:17.643Z,1478914397.644 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:33:17.644Z,1478914397.644 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 23
2016-11-12T01:33:17.981Z,1478914397.981 [PNI_TCM](ERROR): CRC does not match. Expected:0x16793 got:0x48984
2016-11-12T01:33:18.025Z,1478914398.025 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:33:18.026Z,1478914398.026 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:33:18.026Z,1478914398.026 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:33:22.780Z,1478914402.780 [PNI_TCM](ERROR): CRC does not match. Expected:0x40997 got:0x7490
2016-11-12T01:33:43.173Z,1478914423.173 [BPC1](ERROR): Failed to receive battery data
2016-11-12T01:33:43.173Z,1478914423.173 [BPC1] Communications Fault, FailCount= 1
2016-11-12T01:33:43.173Z,1478914423.173 [BPC1](ERROR): Communications Fault
2016-11-12T01:33:43.246Z,1478914423.246 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T01:33:44.422Z,1478914424.422 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:33:44.422Z,1478914424.422 [BPC1] No Fault, FailCount= 1
2016-11-12T01:33:54.803Z,1478914434.803 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T01:33:54.803Z,1478914434.803 [Default:CheckIn:C.Wait] Stopped
2016-11-12T01:33:54.804Z,1478914434.804 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T01:33:54.804Z,1478914434.804 [Default:CheckIn:D] Running Loop=1
2016-11-12T01:33:55.200Z,1478914435.200 [Default:CheckIn:D] Stopped
2016-11-12T01:33:55.200Z,1478914435.200 [Default:CheckIn:E] Running Loop=1
2016-11-12T01:33:55.609Z,1478914435.609 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1243.898177 min 
2016-11-12T01:33:55.609Z,1478914435.609 [Default:CheckIn:E] Stopped
2016-11-12T01:33:55.610Z,1478914435.610 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T01:33:55.610Z,1478914435.610 [Default:CheckIn] Stopped
2016-11-12T01:33:55.610Z,1478914435.610 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T01:33:55.610Z,1478914435.610 [Default:CheckIn](INFO): Running loop #121
2016-11-12T01:33:55.610Z,1478914435.610 [Default:CheckIn] Running Loop=121
2016-11-12T01:33:55.610Z,1478914435.610 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T01:33:55.610Z,1478914435.611 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T01:33:59.168Z,1478914439.168 [NAL9602](INFO): Powering up
2016-11-12T01:34:10.345Z,1478914450.345 [NAL9602](INFO): NAL9602 initialized
2016-11-12T01:34:11.145Z,1478914451.145 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-12T01:34:11.145Z,1478914451.145 [NAL9602] Data Fault, FailCount= 3
2016-11-12T01:34:11.145Z,1478914451.145 [NAL9602](ERROR): Data Fault
2016-11-12T01:34:11.249Z,1478914451.249 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T01:34:11.549Z,1478914451.549 [NAL9602](INFO): Powering down
2016-11-12T01:34:12.475Z,1478914452.475 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T01:34:12.475Z,1478914452.476 [NAL9602] No Fault, FailCount= 3
2016-11-12T01:34:16.747Z,1478914456.747 [NAL9602](INFO): Powering up NAL9602
2016-11-12T01:34:27.945Z,1478914467.945 [NAL9602](INFO): NAL9602 initialized
2016-11-12T01:34:48.024Z,1478914488.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:34:48.820Z,1478914488.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:03.580Z,1478914503.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:04.376Z,1478914504.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:05.172Z,1478914505.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:05.584Z,1478914505.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:06.380Z,1478914506.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:07.140Z,1478914507.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:07.936Z,1478914507.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:08.732Z,1478914508.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:09.140Z,1478914509.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:09.936Z,1478914509.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:10.732Z,1478914510.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:11.140Z,1478914511.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:11.936Z,1478914511.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:12.732Z,1478914512.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:13.140Z,1478914513.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:13.936Z,1478914513.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:14.733Z,1478914514.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:15.204Z,1478914515.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:16.000Z,1478914516.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:16.796Z,1478914516.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:35:17.478Z,1478914517.478 [NAL9602](INFO): SBD MO Status=2, MOMSN=369, MT Status=2, MTMSN=0
2016-11-12T01:35:17.478Z,1478914517.478 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-12T01:36:18.350Z,1478914578.350 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:36:18.350Z,1478914578.350 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 24
2016-11-12T01:36:18.350Z,1478914578.350 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:36:18.364Z,1478914578.364 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:36:18.787Z,1478914578.787 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:36:18.787Z,1478914578.787 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 24
2016-11-12T01:36:19.154Z,1478914579.154 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:36:19.154Z,1478914579.154 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:36:19.154Z,1478914579.154 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:36:27.203Z,1478914587.203 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T01:37:25.079Z,1478914645.079 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T01:37:25.079Z,1478914645.079 [BPC1] Data Fault, FailCount= 1
2016-11-12T01:37:25.079Z,1478914645.079 [BPC1](ERROR): Data Fault
2016-11-12T01:37:25.111Z,1478914645.111 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T01:37:26.323Z,1478914646.323 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:37:26.323Z,1478914646.323 [BPC1] No Fault, FailCount= 1
2016-11-12T01:37:35.776Z,1478914655.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:37:36.573Z,1478914656.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:38:49.344Z,1478914729.344 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T01:38:49.344Z,1478914729.344 [BPC1] Data Fault, FailCount= 1
2016-11-12T01:38:49.344Z,1478914729.344 [BPC1](ERROR): Data Fault
2016-11-12T01:38:49.406Z,1478914729.406 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T01:38:50.579Z,1478914730.579 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:38:50.595Z,1478914730.595 [BPC1] No Fault, FailCount= 1
2016-11-12T01:38:55.760Z,1478914735.760 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T01:33:55.6Z
2016-11-12T01:38:55.760Z,1478914735.760 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T01:38:55.761Z,1478914735.760 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T01:39:00.589Z,1478914740.589 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0484.lzma
2016-11-12T01:39:01.382Z,1478914741.382 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0484.lzma.bak
2016-11-12T01:39:01.383Z,1478914741.383 [DataOverHttps](INFO): SBD MOMSN=4555957
2016-11-12T01:39:12.641Z,1478914752.641 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20161111T044527/Express0485.lzma
2016-11-12T01:39:13.430Z,1478914753.430 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0485.lzma.bak
2016-11-12T01:39:13.430Z,1478914753.430 [DataOverHttps](INFO): SBD MOMSN=4555959
2016-11-12T01:39:14.856Z,1478914754.856 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T01:39:14.856Z,1478914754.856 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T01:39:14.856Z,1478914754.856 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T01:39:19.324Z,1478914759.324 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:39:19.324Z,1478914759.324 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 25
2016-11-12T01:39:19.324Z,1478914759.324 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:39:19.365Z,1478914759.365 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:39:19.741Z,1478914759.741 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:39:19.741Z,1478914759.741 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 25
2016-11-12T01:39:20.145Z,1478914760.145 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:39:20.146Z,1478914760.146 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:39:20.146Z,1478914760.146 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:39:30.857Z,1478914770.856 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-12T01:39:36.465Z,1478914776.465 [NAL9602](INFO): Powering down
2016-11-12T01:40:09.504Z,1478914809.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:40:10.300Z,1478914810.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:40:43.676Z,1478914843.676 [PNI_TCM](ERROR): CRC does not match. Expected:0x34667 got:0x16384
2016-11-12T01:40:53.276Z,1478914853.276 [PNI_TCM](ERROR): CRC does not match. Expected:0x51940 got:0x29376
2016-11-12T01:42:01.669Z,1478914921.669 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T01:42:01.669Z,1478914921.669 [BPC1] Data Fault, FailCount= 1
2016-11-12T01:42:01.669Z,1478914921.669 [BPC1](ERROR): Data Fault
2016-11-12T01:42:01.742Z,1478914921.742 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T01:42:02.930Z,1478914922.930 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:42:02.930Z,1478914922.930 [BPC1] No Fault, FailCount= 1
2016-11-12T01:42:20.186Z,1478914940.186 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:42:20.186Z,1478914940.186 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 26
2016-11-12T01:42:20.186Z,1478914940.186 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:42:20.221Z,1478914940.221 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:42:20.607Z,1478914940.607 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:42:20.608Z,1478914940.608 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 26
2016-11-12T01:42:20.997Z,1478914940.997 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:42:20.997Z,1478914940.997 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:42:20.998Z,1478914940.998 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:42:57.266Z,1478914977.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:42:58.060Z,1478914978.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:43:02.144Z,1478914982.144 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T01:43:02.144Z,1478914982.144 [BPC1] Data Fault, FailCount= 1
2016-11-12T01:43:02.144Z,1478914982.144 [BPC1](ERROR): Data Fault
2016-11-12T01:43:02.207Z,1478914982.207 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T01:43:03.373Z,1478914983.372 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:43:03.373Z,1478914983.373 [BPC1] No Fault, FailCount= 1
2016-11-12T01:43:19.295Z,1478914999.295 [BPC1](ERROR): Failed to receive battery data
2016-11-12T01:43:19.295Z,1478914999.295 [BPC1] Communications Fault, FailCount= 2
2016-11-12T01:43:19.295Z,1478914999.295 [BPC1](ERROR): Communications Fault
2016-11-12T01:43:19.360Z,1478914999.360 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T01:43:20.294Z,1478915000.294 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:43:20.294Z,1478915000.294 [BPC1] No Fault, FailCount= 2
2016-11-12T01:43:28.219Z,1478915008.219 [PNI_TCM](ERROR): CRC does not match. Expected:0x3664 got:0x43958
2016-11-12T01:43:33.022Z,1478915013.022 [PNI_TCM](ERROR): CRC does not match. Expected:0x58775 got:0x7490
2016-11-12T01:44:15.029Z,1478915055.029 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T01:44:15.029Z,1478915055.029 [Default:CheckIn:C.Wait] Stopped
2016-11-12T01:44:15.030Z,1478915055.030 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T01:44:15.030Z,1478915055.030 [Default:CheckIn:D] Running Loop=1
2016-11-12T01:44:15.442Z,1478915055.442 [Default:CheckIn:D] Stopped
2016-11-12T01:44:15.442Z,1478915055.442 [Default:CheckIn:E] Running Loop=1
2016-11-12T01:44:15.921Z,1478915055.921 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1254.235547 min 
2016-11-12T01:44:15.921Z,1478915055.921 [Default:CheckIn:E] Stopped
2016-11-12T01:44:15.921Z,1478915055.921 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T01:44:15.921Z,1478915055.921 [Default:CheckIn] Stopped
2016-11-12T01:44:15.922Z,1478915055.921 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T01:44:15.922Z,1478915055.922 [Default:CheckIn](INFO): Running loop #122
2016-11-12T01:44:15.922Z,1478915055.922 [Default:CheckIn] Running Loop=122
2016-11-12T01:44:15.922Z,1478915055.922 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T01:44:15.922Z,1478915055.922 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T01:44:19.248Z,1478915059.248 [NAL9602](INFO): Powering up
2016-11-12T01:44:30.425Z,1478915070.425 [NAL9602](INFO): NAL9602 initialized
2016-11-12T01:44:31.229Z,1478915071.229 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-12T01:44:31.229Z,1478915071.229 [NAL9602] Data Fault, FailCount= 4
2016-11-12T01:44:31.229Z,1478915071.229 [NAL9602](ERROR): Data Fault
2016-11-12T01:44:31.334Z,1478915071.334 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T01:44:31.624Z,1478915071.625 [NAL9602](INFO): Powering down
2016-11-12T01:44:32.511Z,1478915072.511 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T01:44:32.511Z,1478915072.511 [NAL9602] No Fault, FailCount= 4
2016-11-12T01:44:36.833Z,1478915076.833 [NAL9602](INFO): Powering up NAL9602
2016-11-12T01:44:48.033Z,1478915088.033 [NAL9602](INFO): NAL9602 initialized
2016-11-12T01:45:07.269Z,1478915107.269 [PNI_TCM](ERROR): CRC does not match. Expected:0x25915 got:0x32768
2016-11-12T01:45:08.862Z,1478915108.862 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2016-11-12T01:45:10.454Z,1478915110.454 [PNI_TCM](ERROR): CRC does not match. Expected:0x32237 got:0x49579
2016-11-12T01:45:11.259Z,1478915111.259 [PNI_TCM](ERROR): CRC does not match. Expected:0x52491 got:0x4473
2016-11-12T01:45:13.662Z,1478915113.662 [PNI_TCM](ERROR): CRC does not match. Expected:0x56610 got:0x11293
2016-11-12T01:45:15.259Z,1478915115.259 [PNI_TCM](ERROR): CRC does not match. Expected:0x30884 got:0x1
2016-11-12T01:45:21.149Z,1478915121.149 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:45:21.149Z,1478915121.149 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 27
2016-11-12T01:45:21.149Z,1478915121.149 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:45:21.197Z,1478915121.197 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:45:21.566Z,1478915121.566 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:45:21.566Z,1478915121.566 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 27
2016-11-12T01:45:21.949Z,1478915121.949 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:45:21.949Z,1478915121.949 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:45:21.950Z,1478915121.950 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:45:48.322Z,1478915148.322 [BPC1](ERROR): Failed to receive battery data
2016-11-12T01:45:48.322Z,1478915148.322 [BPC1] Communications Fault, FailCount= 1
2016-11-12T01:45:48.322Z,1478915148.322 [BPC1](ERROR): Communications Fault
2016-11-12T01:45:48.400Z,1478915148.400 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T01:45:49.594Z,1478915149.594 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:45:49.594Z,1478915149.594 [BPC1] No Fault, FailCount= 1
2016-11-12T01:46:27.548Z,1478915187.548 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T01:47:02.285Z,1478915222.285 [PNI_TCM](ERROR): CRC does not match. Expected:0x39704 got:0x31001
2016-11-12T01:47:13.478Z,1478915233.478 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-12T01:47:16.695Z,1478915236.695 [PNI_TCM](ERROR): CRC does not match. Expected:0x55486 got:0x29787
2016-11-12T01:48:06.376Z,1478915286.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:06.784Z,1478915286.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:07.580Z,1478915287.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:08.364Z,1478915288.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:09.168Z,1478915289.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:09.864Z,1478915289.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:10.660Z,1478915290.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:11.457Z,1478915291.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:11.880Z,1478915291.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:12.676Z,1478915292.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:13.473Z,1478915293.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:13.904Z,1478915293.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:14.700Z,1478915294.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:15.496Z,1478915295.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:15.904Z,1478915295.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:16.700Z,1478915296.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:17.496Z,1478915297.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:17.964Z,1478915297.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:18.760Z,1478915298.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:19.556Z,1478915299.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:20.316Z,1478915300.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:21.112Z,1478915301.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:21.909Z,1478915301.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:22.120Z,1478915302.120 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:48:22.120Z,1478915302.120 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 28
2016-11-12T01:48:22.120Z,1478915302.120 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:48:22.134Z,1478915302.134 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:48:22.320Z,1478915302.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:22.526Z,1478915302.526 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:48:22.526Z,1478915302.526 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 28
2016-11-12T01:48:22.875Z,1478915302.875 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:48:22.876Z,1478915302.876 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:48:22.876Z,1478915302.876 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:48:23.116Z,1478915303.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:23.832Z,1478915303.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:24.629Z,1478915304.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:25.425Z,1478915305.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:25.848Z,1478915305.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:26.644Z,1478915306.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:27.441Z,1478915307.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:27.856Z,1478915307.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:28.652Z,1478915308.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:29.449Z,1478915309.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:29.856Z,1478915309.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:30.652Z,1478915310.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:31.448Z,1478915311.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:31.928Z,1478915311.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:32.724Z,1478915312.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:33.520Z,1478915313.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:33.641Z,1478915313.641 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T01:48:33.642Z,1478915313.642 [BPC1] Data Fault, FailCount= 1
2016-11-12T01:48:33.642Z,1478915313.642 [BPC1](ERROR): Data Fault
2016-11-12T01:48:33.712Z,1478915313.712 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T01:48:34.300Z,1478915314.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:34.903Z,1478915314.903 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:48:34.903Z,1478915314.903 [BPC1] No Fault, FailCount= 1
2016-11-12T01:48:35.096Z,1478915315.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:35.893Z,1478915315.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:36.304Z,1478915316.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:37.100Z,1478915317.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:37.812Z,1478915317.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:38.608Z,1478915318.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:39.406Z,1478915319.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:39.824Z,1478915319.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:40.620Z,1478915320.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:41.417Z,1478915321.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:41.832Z,1478915321.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:42.628Z,1478915322.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:43.425Z,1478915323.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:43.838Z,1478915323.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:44.632Z,1478915324.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:45.428Z,1478915325.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:45.900Z,1478915325.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:46.696Z,1478915326.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:47.492Z,1478915327.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:48.268Z,1478915328.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:49.064Z,1478915329.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:49.861Z,1478915329.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:50.272Z,1478915330.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:51.068Z,1478915331.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:51.788Z,1478915331.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:52.584Z,1478915332.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:53.381Z,1478915333.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:53.792Z,1478915333.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:54.588Z,1478915334.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:55.385Z,1478915335.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:55.796Z,1478915335.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:56.592Z,1478915336.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:57.389Z,1478915337.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:57.800Z,1478915337.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:58.596Z,1478915338.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:48:59.393Z,1478915339.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:00.188Z,1478915340.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:00.984Z,1478915340.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:01.780Z,1478915341.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:02.252Z,1478915342.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:03.048Z,1478915343.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:03.844Z,1478915343.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:04.256Z,1478915344.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:05.052Z,1478915345.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:05.768Z,1478915345.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:06.564Z,1478915346.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:07.361Z,1478915347.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:07.776Z,1478915347.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:08.573Z,1478915348.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:09.368Z,1478915349.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:09.780Z,1478915349.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:10.576Z,1478915350.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:11.373Z,1478915351.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:11.784Z,1478915351.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:12.580Z,1478915352.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:13.376Z,1478915353.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:13.868Z,1478915353.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:14.664Z,1478915354.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:15.460Z,1478915355.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:16.093Z,1478915356.093 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T01:44:15.9Z
2016-11-12T01:49:16.093Z,1478915356.093 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T01:49:16.094Z,1478915356.093 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T01:49:16.224Z,1478915356.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:17.020Z,1478915357.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:17.817Z,1478915357.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:18.228Z,1478915358.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:19.024Z,1478915359.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:19.756Z,1478915359.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:20.552Z,1478915360.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:20.742Z,1478915360.742 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0488.lzma
2016-11-12T01:49:21.349Z,1478915361.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:21.880Z,1478915361.880 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0488.lzma.bak
2016-11-12T01:49:21.880Z,1478915361.880 [DataOverHttps](INFO): SBD MOMSN=4555964
2016-11-12T01:49:22.144Z,1478915362.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:22.552Z,1478915362.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:23.353Z,1478915363.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:23.768Z,1478915363.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:24.564Z,1478915364.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:25.360Z,1478915365.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:25.768Z,1478915365.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:26.564Z,1478915366.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:27.360Z,1478915367.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:27.836Z,1478915367.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:28.632Z,1478915368.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:29.428Z,1478915369.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:30.188Z,1478915370.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:30.984Z,1478915370.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:31.730Z,1478915371.730 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20161111T044527/Express0489.lzma
2016-11-12T01:49:31.782Z,1478915371.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:32.216Z,1478915372.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:32.518Z,1478915372.518 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0489.lzma.bak
2016-11-12T01:49:32.518Z,1478915372.518 [DataOverHttps](INFO): SBD MOMSN=4555966
2016-11-12T01:49:33.012Z,1478915373.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:33.720Z,1478915373.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:33.948Z,1478915373.948 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T01:49:33.948Z,1478915373.948 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T01:49:33.948Z,1478915373.948 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T01:49:34.517Z,1478915374.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:35.313Z,1478915375.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:35.728Z,1478915375.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:36.524Z,1478915376.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:37.321Z,1478915377.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:37.732Z,1478915377.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:38.528Z,1478915378.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:39.324Z,1478915379.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:39.732Z,1478915379.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:40.528Z,1478915380.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:41.324Z,1478915381.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:41.820Z,1478915381.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:42.616Z,1478915382.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:43.412Z,1478915383.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:44.164Z,1478915384.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:44.960Z,1478915384.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:45.756Z,1478915385.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:46.168Z,1478915386.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:46.965Z,1478915386.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:47.684Z,1478915387.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:48.482Z,1478915388.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:49.277Z,1478915389.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:49.690Z,1478915389.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:50.484Z,1478915390.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:51.285Z,1478915391.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:51.481Z,1478915391.481 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-12T01:49:51.704Z,1478915391.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:52.500Z,1478915392.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:53.297Z,1478915393.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:53.708Z,1478915393.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:54.504Z,1478915394.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:55.301Z,1478915395.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:55.784Z,1478915395.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:56.580Z,1478915396.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:57.068Z,1478915397.068 [NAL9602](INFO): Powering down
2016-11-12T01:49:57.376Z,1478915397.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:58.137Z,1478915398.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:58.932Z,1478915398.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:49:59.729Z,1478915399.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:00.140Z,1478915400.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:00.936Z,1478915400.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:01.666Z,1478915401.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:02.460Z,1478915402.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:03.257Z,1478915403.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:03.668Z,1478915403.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:04.464Z,1478915404.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:05.272Z,1478915405.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:05.692Z,1478915405.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:06.488Z,1478915406.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:07.284Z,1478915407.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:07.692Z,1478915407.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:08.489Z,1478915408.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:09.284Z,1478915409.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:09.760Z,1478915409.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:10.556Z,1478915410.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:11.354Z,1478915411.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:12.112Z,1478915412.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:12.908Z,1478915412.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:13.705Z,1478915413.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:14.116Z,1478915414.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:14.912Z,1478915414.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:15.640Z,1478915415.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:16.436Z,1478915416.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:17.233Z,1478915417.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:17.644Z,1478915417.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:18.440Z,1478915418.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:19.237Z,1478915419.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:19.648Z,1478915419.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:20.444Z,1478915420.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:21.241Z,1478915421.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:21.652Z,1478915421.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:22.450Z,1478915422.450 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:23.244Z,1478915423.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:23.736Z,1478915423.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:24.533Z,1478915424.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:25.328Z,1478915425.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:26.104Z,1478915426.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:26.900Z,1478915426.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:27.703Z,1478915427.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:28.128Z,1478915428.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:51.728Z,1478915451.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:50:52.524Z,1478915452.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:51:20.473Z,1478915480.473 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T01:51:20.473Z,1478915480.473 [BPC1] Data Fault, FailCount= 1
2016-11-12T01:51:20.474Z,1478915480.474 [BPC1](ERROR): Data Fault
2016-11-12T01:51:20.504Z,1478915480.504 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T01:51:21.744Z,1478915481.744 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:51:21.744Z,1478915481.744 [BPC1] No Fault, FailCount= 1
2016-11-12T01:51:22.924Z,1478915482.924 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:51:22.924Z,1478915482.924 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 29
2016-11-12T01:51:22.924Z,1478915482.924 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:51:22.938Z,1478915482.938 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:51:23.294Z,1478915483.294 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:51:23.294Z,1478915483.294 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 29
2016-11-12T01:51:23.710Z,1478915483.710 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:51:23.711Z,1478915483.711 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:51:23.715Z,1478915483.715 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:52:51.817Z,1478915571.817 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T01:52:51.817Z,1478915571.817 [BPC1] Data Fault, FailCount= 1
2016-11-12T01:52:51.817Z,1478915571.817 [BPC1](ERROR): Data Fault
2016-11-12T01:52:51.880Z,1478915571.880 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T01:52:53.118Z,1478915573.118 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:52:53.118Z,1478915573.118 [BPC1] No Fault, FailCount= 1
2016-11-12T01:53:40.049Z,1478915620.049 [PNI_TCM](ERROR): CRC does not match. Expected:0x17663 got:0x7490
2016-11-12T01:53:40.835Z,1478915620.835 [PNI_TCM](ERROR): CRC does not match. Expected:0x44402 got:0x49671
2016-11-12T01:53:44.844Z,1478915624.844 [PNI_TCM](ERROR): CRC does not match. Expected:0x39453 got:0x64603
2016-11-12T01:53:46.441Z,1478915626.441 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-12T01:53:54.446Z,1478915634.446 [PNI_TCM](ERROR): CRC does not match. Expected:0x60370 got:0x215
2016-11-12T01:54:24.070Z,1478915664.070 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:54:24.070Z,1478915664.070 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 30
2016-11-12T01:54:24.070Z,1478915664.070 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:54:24.085Z,1478915664.085 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:54:24.522Z,1478915664.522 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:54:24.522Z,1478915664.523 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 30
2016-11-12T01:54:24.896Z,1478915664.896 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:54:24.897Z,1478915664.897 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:54:24.897Z,1478915664.897 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:54:34.081Z,1478915674.081 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T01:54:34.081Z,1478915674.081 [Default:CheckIn:C.Wait] Stopped
2016-11-12T01:54:34.081Z,1478915674.081 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T01:54:34.081Z,1478915674.081 [Default:CheckIn:D] Running Loop=1
2016-11-12T01:54:34.476Z,1478915674.476 [Default:CheckIn:D] Stopped
2016-11-12T01:54:34.476Z,1478915674.476 [Default:CheckIn:E] Running Loop=1
2016-11-12T01:54:34.879Z,1478915674.879 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1264.552734 min 
2016-11-12T01:54:34.879Z,1478915674.879 [Default:CheckIn:E] Stopped
2016-11-12T01:54:34.879Z,1478915674.879 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T01:54:34.879Z,1478915674.879 [Default:CheckIn] Stopped
2016-11-12T01:54:34.880Z,1478915674.880 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T01:54:34.880Z,1478915674.880 [Default:CheckIn](INFO): Running loop #123
2016-11-12T01:54:34.880Z,1478915674.880 [Default:CheckIn] Running Loop=123
2016-11-12T01:54:34.880Z,1478915674.880 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T01:54:34.880Z,1478915674.880 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T01:54:35.609Z,1478915675.609 [NAL9602](INFO): Powering up
2016-11-12T01:54:42.362Z,1478915682.362 [PNI_TCM](ERROR): CRC does not match. Expected:0x37384 got:0x16913
2016-11-12T01:54:46.733Z,1478915686.733 [NAL9602](INFO): NAL9602 initialized
2016-11-12T01:55:18.741Z,1478915718.741 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-12T01:55:18.819Z,1478915718.819 [NAL9602](FAULT): received: 
+CSQ:0

OK9, 2, 0, 0, 0

OK
2016-11-12T01:55:18.819Z,1478915718.819 [NAL9602] Data Fault, FailCount= 5
2016-11-12T01:55:18.819Z,1478915718.819 [NAL9602](ERROR): Data Fault
2016-11-12T01:55:18.928Z,1478915718.928 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T01:55:18.929Z,1478915718.929 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-11-12T01:55:19.141Z,1478915719.141 [NAL9602](INFO): Powering down
2016-11-12T01:55:22.357Z,1478915722.357 [BPC1](ERROR): Failed to receive battery data
2016-11-12T01:55:22.357Z,1478915722.357 [BPC1] Communications Fault, FailCount= 1
2016-11-12T01:55:22.357Z,1478915722.357 [BPC1](ERROR): Communications Fault
2016-11-12T01:55:22.436Z,1478915722.436 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T01:55:23.609Z,1478915723.609 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:55:23.609Z,1478915723.609 [BPC1] No Fault, FailCount= 1
2016-11-12T01:56:00.044Z,1478915760.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:56:00.840Z,1478915760.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:56:14.004Z,1478915774.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:56:14.800Z,1478915774.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:56:27.597Z,1478915787.597 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T01:57:15.715Z,1478915835.715 [PNI_TCM](ERROR): CRC does not match. Expected:0x20498 got:0x17010
2016-11-12T01:57:18.981Z,1478915838.981 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T01:57:18.981Z,1478915838.981 [NAL9602] No Fault, FailCount= 5
2016-11-12T01:57:19.294Z,1478915839.294 [NAL9602](INFO): Powering up NAL9602
2016-11-12T01:57:22.114Z,1478915842.114 [PNI_TCM](ERROR): CRC does not match. Expected:0x34274 got:0x5917
2016-11-12T01:57:23.714Z,1478915843.714 [PNI_TCM](ERROR): CRC does not match. Expected:0x50658 got:0x32768
2016-11-12T01:57:24.930Z,1478915844.930 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T01:57:24.930Z,1478915844.931 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 31
2016-11-12T01:57:24.930Z,1478915844.931 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T01:57:24.973Z,1478915844.973 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T01:57:25.351Z,1478915845.351 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T01:57:25.351Z,1478915845.351 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 31
2016-11-12T01:57:25.739Z,1478915845.739 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T01:57:25.739Z,1478915845.739 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T01:57:25.740Z,1478915845.740 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T01:57:30.485Z,1478915850.485 [NAL9602](INFO): NAL9602 initialized
2016-11-12T01:57:31.290Z,1478915851.290 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-12T01:57:31.290Z,1478915851.290 [NAL9602] Data Fault, FailCount= 1
2016-11-12T01:57:31.290Z,1478915851.290 [NAL9602](ERROR): Data Fault
2016-11-12T01:57:31.388Z,1478915851.388 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T01:57:31.689Z,1478915851.689 [NAL9602](INFO): Powering down
2016-11-12T01:57:32.632Z,1478915852.632 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T01:57:32.632Z,1478915852.632 [NAL9602] No Fault, FailCount= 1
2016-11-12T01:57:34.116Z,1478915854.116 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T01:57:34.116Z,1478915854.116 [BPC1] Data Fault, FailCount= 1
2016-11-12T01:57:34.116Z,1478915854.116 [BPC1](ERROR): Data Fault
2016-11-12T01:57:34.145Z,1478915854.145 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T01:57:35.356Z,1478915855.356 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T01:57:35.356Z,1478915855.356 [BPC1] No Fault, FailCount= 1
2016-11-12T01:57:39.674Z,1478915859.674 [NAL9602](INFO): Powering up NAL9602
2016-11-12T01:57:50.577Z,1478915870.577 [NAL9602](INFO): NAL9602 initialized
2016-11-12T01:58:31.389Z,1478915911.389 [NAL9602](INFO): SBD MO Status=0, MOMSN=369, MT Status=0, MTMSN=0
2016-11-12T01:58:31.389Z,1478915911.389 [NAL9602](INFO): No messages in MT queue
2016-11-12T01:58:33.788Z,1478915913.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:58:34.585Z,1478915914.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:58:46.980Z,1478915926.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:58:47.776Z,1478915927.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T01:59:34.993Z,1478915974.993 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T01:54:34.9Z
2016-11-12T01:59:34.993Z,1478915974.993 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T01:59:34.993Z,1478915974.993 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T01:59:39.725Z,1478915979.725 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20161111T044527/Courier0492.lzma
2016-11-12T01:59:40.506Z,1478915980.506 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0492.lzma.bak
2016-11-12T01:59:40.507Z,1478915980.507 [DataOverHttps](INFO): SBD MOMSN=4555971
2016-11-12T01:59:41.804Z,1478915981.804 [NAL9602](INFO): Powering down
2016-11-12T01:59:50.906Z,1478915990.906 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20161111T044527/Express0493.lzma
2016-11-12T01:59:51.706Z,1478915991.706 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0493.lzma.bak
2016-11-12T01:59:51.706Z,1478915991.706 [DataOverHttps](INFO): SBD MOMSN=4555974
2016-11-12T01:59:53.135Z,1478915993.135 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T01:59:53.136Z,1478915993.136 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T01:59:53.136Z,1478915993.136 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T02:00:26.033Z,1478916026.033 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:00:26.033Z,1478916026.033 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 32
2016-11-12T02:00:26.033Z,1478916026.033 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:00:26.048Z,1478916026.048 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:00:26.450Z,1478916026.450 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:00:26.450Z,1478916026.450 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 32
2016-11-12T02:00:26.834Z,1478916026.834 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:00:26.834Z,1478916026.834 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:00:26.834Z,1478916026.834 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:00:44.800Z,1478916044.800 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T02:00:44.801Z,1478916044.801 [BPC1] Data Fault, FailCount= 1
2016-11-12T02:00:44.801Z,1478916044.801 [BPC1](ERROR): Data Fault
2016-11-12T02:00:44.859Z,1478916044.859 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T02:00:46.029Z,1478916046.029 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:00:46.030Z,1478916046.030 [BPC1] No Fault, FailCount= 1
2016-11-12T02:02:29.081Z,1478916149.081 [BPC1](ERROR): Failed to receive battery data
2016-11-12T02:02:29.081Z,1478916149.081 [BPC1] Communications Fault, FailCount= 1
2016-11-12T02:02:29.081Z,1478916149.081 [BPC1](ERROR): Communications Fault
2016-11-12T02:02:29.153Z,1478916149.152 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T02:02:30.323Z,1478916150.323 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:02:30.323Z,1478916150.323 [BPC1] No Fault, FailCount= 1
2016-11-12T02:02:36.706Z,1478916156.706 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T02:02:36.706Z,1478916156.706 [BPC1] Data Fault, FailCount= 2
2016-11-12T02:02:36.706Z,1478916156.706 [BPC1](ERROR): Data Fault
2016-11-12T02:02:36.823Z,1478916156.823 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T02:02:37.939Z,1478916157.940 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:02:37.940Z,1478916157.940 [BPC1] No Fault, FailCount= 2
2016-11-12T02:03:26.923Z,1478916206.923 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:03:26.924Z,1478916206.924 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 33
2016-11-12T02:03:26.924Z,1478916206.924 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:03:26.962Z,1478916206.962 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:03:27.360Z,1478916207.360 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:03:27.361Z,1478916207.361 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 33
2016-11-12T02:03:27.728Z,1478916207.728 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:03:27.728Z,1478916207.728 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:03:27.729Z,1478916207.729 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:03:53.184Z,1478916233.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:03:53.980Z,1478916233.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:03:54.456Z,1478916234.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:03:55.252Z,1478916235.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:03:56.048Z,1478916236.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:03:56.816Z,1478916236.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:03:57.612Z,1478916237.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:03:58.413Z,1478916238.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:03:58.824Z,1478916238.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:03:59.620Z,1478916239.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:04:00.342Z,1478916240.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:04:07.150Z,1478916247.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:04:07.944Z,1478916247.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:04:08.436Z,1478916248.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:04:09.232Z,1478916249.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:04:10.028Z,1478916250.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:04:53.370Z,1478916293.370 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T02:04:53.370Z,1478916293.370 [Default:CheckIn:C.Wait] Stopped
2016-11-12T02:04:53.370Z,1478916293.370 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T02:04:53.370Z,1478916293.370 [Default:CheckIn:D] Running Loop=1
2016-11-12T02:04:53.771Z,1478916293.771 [Default:CheckIn:D] Stopped
2016-11-12T02:04:53.771Z,1478916293.771 [Default:CheckIn:E] Running Loop=1
2016-11-12T02:04:54.172Z,1478916294.172 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1274.874349 min 
2016-11-12T02:04:54.172Z,1478916294.172 [Default:CheckIn:E] Stopped
2016-11-12T02:04:54.172Z,1478916294.172 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T02:04:54.172Z,1478916294.172 [Default:CheckIn] Stopped
2016-11-12T02:04:54.173Z,1478916294.173 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T02:04:54.173Z,1478916294.173 [Default:CheckIn](INFO): Running loop #124
2016-11-12T02:04:54.173Z,1478916294.173 [Default:CheckIn] Running Loop=124
2016-11-12T02:04:54.173Z,1478916294.173 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T02:04:54.173Z,1478916294.173 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T02:04:58.031Z,1478916298.031 [NAL9602](INFO): Powering up
2016-11-12T02:05:09.005Z,1478916309.005 [NAL9602](INFO): NAL9602 initialized
2016-11-12T02:05:45.027Z,1478916345.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:05:45.824Z,1478916345.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:05:46.308Z,1478916346.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:05:47.104Z,1478916347.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:05:47.920Z,1478916347.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:05:48.656Z,1478916348.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:05:49.452Z,1478916349.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:06:05.386Z,1478916365.386 [NAL9602](INFO): SBD MO Status=2, MOMSN=370, MT Status=2, MTMSN=0
2016-11-12T02:06:05.386Z,1478916365.386 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-12T02:06:21.386Z,1478916381.386 [NAL9602](INFO): SBD MO Status=0, MOMSN=370, MT Status=0, MTMSN=0
2016-11-12T02:06:21.386Z,1478916381.386 [NAL9602](INFO): No messages in MT queue
2016-11-12T02:06:21.386Z,1478916381.386 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2016-11-12T02:06:27.913Z,1478916387.913 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:06:27.913Z,1478916387.913 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 34
2016-11-12T02:06:27.913Z,1478916387.913 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:06:27.946Z,1478916387.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:06:27.947Z,1478916387.947 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T02:06:28.266Z,1478916388.266 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:06:28.266Z,1478916388.266 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 34
2016-11-12T02:06:28.653Z,1478916388.653 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:06:28.653Z,1478916388.653 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:06:28.654Z,1478916388.654 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:06:42.216Z,1478916402.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:06:43.012Z,1478916403.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:06:56.980Z,1478916416.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:06:57.776Z,1478916417.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:07:52.221Z,1478916472.221 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-12T02:07:52.221Z,1478916472.221 [NAL9602] Data Fault, FailCount= 1
2016-11-12T02:07:52.221Z,1478916472.221 [NAL9602](ERROR): Data Fault
2016-11-12T02:07:52.336Z,1478916472.336 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T02:07:52.617Z,1478916472.617 [NAL9602](INFO): Powering down
2016-11-12T02:07:53.500Z,1478916473.500 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T02:07:53.500Z,1478916473.500 [NAL9602] No Fault, FailCount= 1
2016-11-12T02:07:58.450Z,1478916478.450 [NAL9602](INFO): Powering up NAL9602
2016-11-12T02:08:09.425Z,1478916489.425 [NAL9602](INFO): NAL9602 initialized
2016-11-12T02:08:17.072Z,1478916497.072 [PNI_TCM](ERROR): CRC does not match. Expected:0x34345 got:0x30681
2016-11-12T02:08:17.850Z,1478916497.850 [PNI_TCM](ERROR): CRC does not match. Expected:0x20743 got:0x52501
2016-11-12T02:08:20.657Z,1478916500.657 [PNI_TCM](ERROR): CRC does not match. Expected:0x6515 got:0x16995
2016-11-12T02:08:24.259Z,1478916504.259 [PNI_TCM](ERROR): CRC does not match. Expected:0x52032 got:0x60800
2016-11-12T02:08:25.063Z,1478916505.063 [PNI_TCM](ERROR): CRC does not match. Expected:0x6061 got:0x6335
2016-11-12T02:08:26.656Z,1478916506.656 [PNI_TCM](ERROR): CRC does not match. Expected:0x23423 got:0x32283
2016-11-12T02:08:28.260Z,1478916508.260 [PNI_TCM](ERROR): CRC does not match. Expected:0x33492 got:0x64797
2016-11-12T02:08:29.854Z,1478916509.853 [PNI_TCM](ERROR): CRC does not match. Expected:0x33418 got:0x48804
2016-11-12T02:08:33.063Z,1478916513.063 [PNI_TCM](ERROR): CRC does not match. Expected:0x10597 got:0x49579
2016-11-12T02:09:28.734Z,1478916568.734 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:09:28.734Z,1478916568.734 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 35
2016-11-12T02:09:28.734Z,1478916568.734 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:09:28.765Z,1478916568.764 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:09:29.158Z,1478916569.158 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:09:29.158Z,1478916569.158 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 35
2016-11-12T02:09:29.609Z,1478916569.609 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:09:29.610Z,1478916569.610 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:09:29.610Z,1478916569.610 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:09:30.748Z,1478916570.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:09:31.544Z,1478916571.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:09:54.369Z,1478916594.369 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T02:04:54.2Z
2016-11-12T02:09:54.369Z,1478916594.369 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T02:09:54.369Z,1478916594.369 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T02:09:58.958Z,1478916598.958 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0496.lzma
2016-11-12T02:10:00.550Z,1478916600.550 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0496.lzma.bak
2016-11-12T02:10:00.550Z,1478916600.550 [DataOverHttps](INFO): SBD MOMSN=4555982
2016-11-12T02:10:05.572Z,1478916605.572 [NAL9602](INFO): Powering down
2016-11-12T02:10:10.962Z,1478916610.962 [DataOverHttps](INFO): Sending 165 bytes from file Logs/20161111T044527/Express0497.lzma
2016-11-12T02:10:11.758Z,1478916611.758 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0497.lzma.bak
2016-11-12T02:10:11.758Z,1478916611.758 [DataOverHttps](INFO): SBD MOMSN=4555984
2016-11-12T02:10:13.110Z,1478916613.110 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T02:10:13.110Z,1478916613.110 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T02:10:13.111Z,1478916613.111 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T02:12:04.500Z,1478916724.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:12:05.296Z,1478916725.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:12:17.626Z,1478916737.626 [BPC1](ERROR): Failed to receive battery data
2016-11-12T02:12:17.626Z,1478916737.626 [BPC1] Communications Fault, FailCount= 1
2016-11-12T02:12:17.626Z,1478916737.626 [BPC1](ERROR): Communications Fault
2016-11-12T02:12:17.707Z,1478916737.707 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T02:12:18.592Z,1478916738.592 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:12:18.592Z,1478916738.592 [BPC1] No Fault, FailCount= 1
2016-11-12T02:12:29.792Z,1478916749.792 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:12:29.792Z,1478916749.792 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 36
2016-11-12T02:12:29.792Z,1478916749.792 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:12:29.815Z,1478916749.815 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:12:30.250Z,1478916750.250 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:12:30.251Z,1478916750.251 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 36
2016-11-12T02:12:30.585Z,1478916750.585 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:12:30.585Z,1478916750.585 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:12:30.586Z,1478916750.586 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:12:47.371Z,1478916767.371 [BPC1](ERROR): Failed to receive battery data
2016-11-12T02:12:47.371Z,1478916767.371 [BPC1] Communications Fault, FailCount= 1
2016-11-12T02:12:47.371Z,1478916767.371 [BPC1](ERROR): Communications Fault
2016-11-12T02:12:47.401Z,1478916767.401 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T02:12:48.605Z,1478916768.605 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:12:48.605Z,1478916768.605 [BPC1] No Fault, FailCount= 1
2016-11-12T02:14:11.104Z,1478916851.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:11.838Z,1478916851.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:12.632Z,1478916852.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:13.428Z,1478916853.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:13.884Z,1478916853.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:14.680Z,1478916854.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:15.372Z,1478916855.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:21.006Z,1478916861.006 [BPC1](ERROR): Failed to parse message.
2016-11-12T02:14:21.006Z,1478916861.006 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T02:14:21.006Z,1478916861.006 [BPC1] Data Fault, FailCount= 1
2016-11-12T02:14:21.007Z,1478916861.007 [BPC1](ERROR): Data Fault
2016-11-12T02:14:21.104Z,1478916861.104 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T02:14:22.204Z,1478916862.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:22.214Z,1478916862.214 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:14:22.214Z,1478916862.214 [BPC1] No Fault, FailCount= 1
2016-11-12T02:14:22.000Z,1478916863.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:23.468Z,1478916863.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:24.264Z,1478916864.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:25.061Z,1478916865.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:25.820Z,1478916865.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:26.616Z,1478916866.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:27.412Z,1478916867.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:27.824Z,1478916867.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:28.620Z,1478916868.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:29.396Z,1478916869.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:36.212Z,1478916876.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:37.009Z,1478916877.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:37.448Z,1478916877.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:38.244Z,1478916878.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:39.040Z,1478916879.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:39.816Z,1478916879.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:40.612Z,1478916880.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:52.228Z,1478916892.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:14:53.024Z,1478916893.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:04.112Z,1478916904.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:04.908Z,1478916904.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:05.412Z,1478916905.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:06.208Z,1478916906.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:07.012Z,1478916907.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:07.768Z,1478916907.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:08.564Z,1478916908.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:09.361Z,1478916909.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:09.772Z,1478916909.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:10.568Z,1478916910.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:11.280Z,1478916911.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:12.076Z,1478916912.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:12.873Z,1478916912.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:13.288Z,1478916913.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:13.388Z,1478916913.388 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T02:15:13.388Z,1478916913.388 [Default:CheckIn:C.Wait] Stopped
2016-11-12T02:15:13.388Z,1478916913.388 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T02:15:13.389Z,1478916913.388 [Default:CheckIn:D] Running Loop=1
2016-11-12T02:15:13.795Z,1478916913.795 [Default:CheckIn:D] Stopped
2016-11-12T02:15:13.795Z,1478916913.796 [Default:CheckIn:E] Running Loop=1
2016-11-12T02:15:14.084Z,1478916914.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:14.213Z,1478916914.213 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1285.208073 min 
2016-11-12T02:15:14.213Z,1478916914.213 [Default:CheckIn:E] Stopped
2016-11-12T02:15:14.213Z,1478916914.213 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T02:15:14.213Z,1478916914.213 [Default:CheckIn] Stopped
2016-11-12T02:15:14.213Z,1478916914.213 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T02:15:14.213Z,1478916914.213 [Default:CheckIn](INFO): Running loop #125
2016-11-12T02:15:14.213Z,1478916914.213 [Default:CheckIn] Running Loop=125
2016-11-12T02:15:14.214Z,1478916914.214 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T02:15:14.214Z,1478916914.214 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T02:15:14.881Z,1478916914.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:15.292Z,1478916915.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:16.088Z,1478916916.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:16.885Z,1478916916.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:17.296Z,1478916917.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:17.883Z,1478916917.883 [NAL9602](INFO): Powering up
2016-11-12T02:15:18.092Z,1478916918.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:18.888Z,1478916918.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:19.388Z,1478916919.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:20.184Z,1478916920.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:20.980Z,1478916920.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:21.748Z,1478916921.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:22.544Z,1478916922.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:23.341Z,1478916923.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:23.752Z,1478916923.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:24.548Z,1478916924.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:25.300Z,1478916925.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:26.096Z,1478916926.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:26.892Z,1478916926.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:27.300Z,1478916927.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:28.096Z,1478916928.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:28.842Z,1478916928.842 [NAL9602](INFO): NAL9602 initialized
2016-11-12T02:15:28.892Z,1478916928.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:29.300Z,1478916929.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:30.096Z,1478916930.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:30.892Z,1478916930.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:30.952Z,1478916930.952 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:15:30.952Z,1478916930.952 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 37
2016-11-12T02:15:30.952Z,1478916930.952 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:15:30.975Z,1478916930.974 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:15:31.300Z,1478916931.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:31.324Z,1478916931.324 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:15:31.324Z,1478916931.325 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 37
2016-11-12T02:15:31.687Z,1478916931.687 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:15:31.688Z,1478916931.688 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:15:31.688Z,1478916931.688 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:15:32.096Z,1478916932.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:32.892Z,1478916932.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:33.352Z,1478916933.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:34.148Z,1478916934.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:34.944Z,1478916934.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:35.732Z,1478916935.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:36.528Z,1478916936.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:37.326Z,1478916937.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:37.736Z,1478916937.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:38.532Z,1478916938.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:39.236Z,1478916939.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:40.032Z,1478916940.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:40.828Z,1478916940.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:41.248Z,1478916941.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:42.044Z,1478916942.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:42.841Z,1478916942.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:43.252Z,1478916943.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:44.048Z,1478916944.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:44.845Z,1478916944.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:45.256Z,1478916945.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:45.664Z,1478916945.664 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T02:15:45.664Z,1478916945.664 [BPC1] Data Fault, FailCount= 1
2016-11-12T02:15:45.664Z,1478916945.664 [BPC1](ERROR): Data Fault
2016-11-12T02:15:45.732Z,1478916945.732 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T02:15:46.052Z,1478916946.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:46.848Z,1478916946.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:47.014Z,1478916947.014 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:15:47.014Z,1478916947.014 [BPC1] No Fault, FailCount= 1
2016-11-12T02:15:47.336Z,1478916947.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:48.132Z,1478916948.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:48.928Z,1478916948.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:49.708Z,1478916949.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:50.504Z,1478916950.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:51.301Z,1478916951.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:51.720Z,1478916951.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:52.516Z,1478916952.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:53.220Z,1478916953.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:54.018Z,1478916954.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:54.813Z,1478916954.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:55.240Z,1478916955.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:56.036Z,1478916956.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:56.832Z,1478916956.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:57.244Z,1478916957.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:58.040Z,1478916958.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:58.836Z,1478916958.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:15:59.244Z,1478916959.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:00.040Z,1478916960.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:00.836Z,1478916960.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:01.308Z,1478916961.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:02.105Z,1478916962.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:02.900Z,1478916962.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:03.672Z,1478916963.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:04.468Z,1478916964.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:05.265Z,1478916965.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:05.676Z,1478916965.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:06.472Z,1478916966.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:07.204Z,1478916967.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:07.000Z,1478916968.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:08.797Z,1478916968.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:09.208Z,1478916969.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:10.004Z,1478916970.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:10.803Z,1478916970.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:11.232Z,1478916971.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:12.028Z,1478916972.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:12.824Z,1478916972.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:13.232Z,1478916973.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:14.028Z,1478916974.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:14.824Z,1478916974.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:15.324Z,1478916975.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:16.120Z,1478916976.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:16.916Z,1478916976.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:17.660Z,1478916977.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:18.456Z,1478916978.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:18.698Z,1478916978.698 [NAL9602](INFO): SBD MO Status=0, MOMSN=371, MT Status=0, MTMSN=0
2016-11-12T02:16:18.698Z,1478916978.698 [NAL9602](INFO): No messages in MT queue
2016-11-12T02:16:19.252Z,1478916979.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:19.664Z,1478916979.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:20.460Z,1478916980.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:21.180Z,1478916981.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:21.976Z,1478916981.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:22.773Z,1478916982.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:23.184Z,1478916983.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:23.980Z,1478916983.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:24.777Z,1478916984.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:25.200Z,1478916985.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:25.996Z,1478916985.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:26.799Z,1478916986.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:27.208Z,1478916987.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:27.989Z,1478916987.989 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T02:16:28.004Z,1478916988.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:28.800Z,1478916988.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:29.268Z,1478916989.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:30.064Z,1478916990.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:30.860Z,1478916990.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:31.624Z,1478916991.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:32.420Z,1478916992.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:33.216Z,1478916993.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:33.628Z,1478916993.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:34.424Z,1478916994.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:35.180Z,1478916995.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:35.976Z,1478916995.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:36.772Z,1478916996.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:37.180Z,1478916997.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:37.976Z,1478916997.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:38.772Z,1478916998.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:39.184Z,1478916999.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:39.980Z,1478916999.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:40.776Z,1478917000.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:41.196Z,1478917001.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:41.992Z,1478917001.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:42.788Z,1478917002.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:43.236Z,1478917003.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:44.032Z,1478917004.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:44.828Z,1478917004.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:45.608Z,1478917005.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:46.404Z,1478917006.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:47.200Z,1478917007.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:47.612Z,1478917007.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:48.408Z,1478917008.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:49.168Z,1478917009.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:49.964Z,1478917009.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:50.760Z,1478917010.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:51.168Z,1478917011.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:51.964Z,1478917011.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:52.760Z,1478917012.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:53.168Z,1478917013.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:53.972Z,1478917013.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:54.768Z,1478917014.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:55.184Z,1478917015.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:55.980Z,1478917015.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:56.777Z,1478917016.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:57.232Z,1478917017.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:58.028Z,1478917018.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:58.824Z,1478917018.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:16:59.596Z,1478917019.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:00.392Z,1478917020.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:01.188Z,1478917021.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:01.600Z,1478917021.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:02.396Z,1478917022.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:03.114Z,1478917023.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:03.908Z,1478917023.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:04.705Z,1478917024.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:05.116Z,1478917025.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:05.912Z,1478917025.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:06.708Z,1478917026.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:07.120Z,1478917027.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:07.918Z,1478917027.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:08.716Z,1478917028.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:09.124Z,1478917029.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:09.920Z,1478917029.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:10.716Z,1478917030.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:11.196Z,1478917031.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:11.992Z,1478917031.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:12.788Z,1478917032.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:13.572Z,1478917033.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:14.368Z,1478917034.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:15.166Z,1478917035.166 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:15.590Z,1478917035.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:16.384Z,1478917036.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:17.089Z,1478917037.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:17.884Z,1478917037.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:18.681Z,1478917038.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:19.100Z,1478917039.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:19.897Z,1478917039.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:20.692Z,1478917040.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:21.104Z,1478917041.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:21.900Z,1478917041.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:22.697Z,1478917042.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:23.104Z,1478917043.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:23.900Z,1478917043.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:24.696Z,1478917044.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:25.172Z,1478917045.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:25.968Z,1478917045.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:26.764Z,1478917046.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:27.536Z,1478917047.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:28.332Z,1478917048.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:29.135Z,1478917049.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:29.548Z,1478917049.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:30.344Z,1478917050.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:31.060Z,1478917051.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:31.856Z,1478917051.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:32.653Z,1478917052.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:33.064Z,1478917053.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:33.860Z,1478917053.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:34.593Z,1478917054.593 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-12T02:17:34.657Z,1478917054.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:35.068Z,1478917055.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:35.864Z,1478917055.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:36.661Z,1478917056.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:37.072Z,1478917057.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:37.868Z,1478917057.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:38.664Z,1478917058.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:39.156Z,1478917059.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:39.952Z,1478917059.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:40.748Z,1478917060.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:41.516Z,1478917061.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:42.312Z,1478917062.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:42.586Z,1478917062.586 [PNI_TCM](ERROR): CRC does not match. Expected:0x4781 got:0x0
2016-11-12T02:17:43.109Z,1478917063.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:43.536Z,1478917063.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:44.332Z,1478917064.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:45.040Z,1478917065.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:45.836Z,1478917065.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:46.632Z,1478917066.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:47.044Z,1478917067.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:47.840Z,1478917067.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:48.637Z,1478917068.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:49.048Z,1478917069.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:49.844Z,1478917069.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:50.640Z,1478917070.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:51.052Z,1478917071.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:51.848Z,1478917071.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:52.644Z,1478917072.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:53.128Z,1478917073.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:53.924Z,1478917073.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:54.720Z,1478917074.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:55.488Z,1478917075.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:56.284Z,1478917076.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:57.080Z,1478917077.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:57.496Z,1478917077.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:58.292Z,1478917078.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:59.036Z,1478917079.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:17:59.832Z,1478917079.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:00.629Z,1478917080.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:01.040Z,1478917081.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:01.836Z,1478917081.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:02.633Z,1478917082.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:03.044Z,1478917083.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:03.840Z,1478917083.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:04.637Z,1478917084.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:05.060Z,1478917085.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:05.856Z,1478917085.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:06.652Z,1478917086.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:07.108Z,1478917087.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:07.904Z,1478917087.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:08.700Z,1478917088.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:09.468Z,1478917089.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:10.264Z,1478917090.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:10.549Z,1478917090.549 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-12T02:18:10.549Z,1478917090.549 [NAL9602] Data Fault, FailCount= 1
2016-11-12T02:18:10.549Z,1478917090.549 [NAL9602](ERROR): Data Fault
2016-11-12T02:18:10.637Z,1478917090.637 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T02:18:10.948Z,1478917090.948 [NAL9602](INFO): Powering down
2016-11-12T02:18:11.060Z,1478917091.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:11.472Z,1478917091.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:11.855Z,1478917091.855 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T02:18:11.855Z,1478917091.855 [NAL9602] No Fault, FailCount= 1
2016-11-12T02:18:12.268Z,1478917092.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:12.996Z,1478917092.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:13.792Z,1478917093.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:14.588Z,1478917094.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:15.028Z,1478917095.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:15.824Z,1478917095.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:16.620Z,1478917096.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:17.028Z,1478917097.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:17.824Z,1478917097.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:18.620Z,1478917098.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:18.806Z,1478917098.806 [NAL9602](INFO): Powering up NAL9602
2016-11-12T02:18:19.032Z,1478917099.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:19.828Z,1478917099.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:20.624Z,1478917100.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:21.096Z,1478917101.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:21.892Z,1478917101.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:22.688Z,1478917102.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:23.448Z,1478917103.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:24.244Z,1478917104.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:25.041Z,1478917105.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:25.472Z,1478917105.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:26.268Z,1478917106.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:27.028Z,1478917107.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:27.824Z,1478917107.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:28.620Z,1478917108.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:29.028Z,1478917109.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:29.729Z,1478917109.729 [NAL9602](INFO): NAL9602 initialized
2016-11-12T02:18:29.824Z,1478917109.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:30.620Z,1478917110.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:31.028Z,1478917111.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:31.800Z,1478917111.800 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:18:31.800Z,1478917111.800 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 38
2016-11-12T02:18:31.800Z,1478917111.800 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:18:31.815Z,1478917111.815 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:18:31.824Z,1478917111.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:32.216Z,1478917112.216 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:18:32.216Z,1478917112.216 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 38
2016-11-12T02:18:32.620Z,1478917112.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:32.681Z,1478917112.681 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:18:32.682Z,1478917112.681 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:18:32.682Z,1478917112.682 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:18:33.028Z,1478917113.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:33.824Z,1478917113.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:34.620Z,1478917114.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:35.068Z,1478917115.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:35.864Z,1478917115.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:36.660Z,1478917116.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:37.440Z,1478917117.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:38.236Z,1478917118.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:39.033Z,1478917119.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:39.444Z,1478917119.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:40.240Z,1478917120.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:40.964Z,1478917120.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:41.760Z,1478917121.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:42.557Z,1478917122.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:42.996Z,1478917122.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:43.792Z,1478917123.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:44.588Z,1478917124.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:44.996Z,1478917124.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:45.792Z,1478917125.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:46.588Z,1478917126.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:46.996Z,1478917126.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:47.792Z,1478917127.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:48.588Z,1478917128.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:49.060Z,1478917129.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:49.856Z,1478917129.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:50.652Z,1478917130.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:51.404Z,1478917131.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:52.200Z,1478917132.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:52.996Z,1478917132.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:53.416Z,1478917133.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:54.212Z,1478917134.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:54.952Z,1478917134.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:55.748Z,1478917135.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:56.545Z,1478917136.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:56.956Z,1478917136.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:57.752Z,1478917137.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:58.549Z,1478917138.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:58.960Z,1478917138.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:18:59.756Z,1478917139.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:00.553Z,1478917140.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:00.960Z,1478917140.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:01.756Z,1478917141.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:02.553Z,1478917142.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:03.036Z,1478917143.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:03.832Z,1478917143.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:04.628Z,1478917144.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:05.424Z,1478917145.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:05.832Z,1478917145.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:06.628Z,1478917146.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:07.404Z,1478917147.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:08.200Z,1478917148.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:08.912Z,1478917148.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:09.710Z,1478917149.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:10.505Z,1478917150.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:10.916Z,1478917150.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:11.712Z,1478917151.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:12.509Z,1478917152.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:12.936Z,1478917152.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:13.732Z,1478917153.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:14.528Z,1478917154.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:14.936Z,1478917154.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:15.732Z,1478917155.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:16.528Z,1478917156.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:17.008Z,1478917157.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:17.804Z,1478917157.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:18.600Z,1478917158.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:19.360Z,1478917159.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:20.156Z,1478917160.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:20.953Z,1478917160.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:21.368Z,1478917161.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:22.164Z,1478917162.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:22.892Z,1478917162.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:23.689Z,1478917163.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:24.492Z,1478917164.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:24.912Z,1478917164.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:25.709Z,1478917165.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:26.505Z,1478917166.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:26.916Z,1478917166.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:27.712Z,1478917167.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:28.508Z,1478917168.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:28.916Z,1478917168.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:29.712Z,1478917169.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:30.508Z,1478917170.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:30.992Z,1478917170.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:31.788Z,1478917171.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:32.587Z,1478917172.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:33.340Z,1478917173.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:34.136Z,1478917174.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:34.933Z,1478917174.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:35.344Z,1478917175.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:36.140Z,1478917176.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:36.868Z,1478917176.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:37.664Z,1478917177.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:38.461Z,1478917178.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:38.872Z,1478917178.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:39.668Z,1478917179.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:40.475Z,1478917180.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:40.892Z,1478917180.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:41.688Z,1478917181.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:42.485Z,1478917182.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:42.892Z,1478917182.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:43.688Z,1478917183.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:44.484Z,1478917184.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:44.968Z,1478917184.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:45.764Z,1478917185.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:46.562Z,1478917186.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:47.316Z,1478917187.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:48.112Z,1478917188.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:48.909Z,1478917188.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:49.332Z,1478917189.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:50.128Z,1478917190.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:50.848Z,1478917190.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:51.644Z,1478917191.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:52.441Z,1478917192.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:52.856Z,1478917192.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:53.652Z,1478917193.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:54.449Z,1478917194.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:54.860Z,1478917194.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:55.656Z,1478917195.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:56.453Z,1478917196.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:56.864Z,1478917196.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:57.660Z,1478917197.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:58.456Z,1478917198.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:58.944Z,1478917198.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:19:59.740Z,1478917199.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:00.536Z,1478917200.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:01.296Z,1478917201.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:02.092Z,1478917202.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:02.890Z,1478917202.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:03.304Z,1478917203.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:04.101Z,1478917204.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:04.824Z,1478917204.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:05.620Z,1478917205.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:06.417Z,1478917206.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:06.832Z,1478917206.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:07.628Z,1478917207.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:08.425Z,1478917208.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:08.836Z,1478917208.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:09.633Z,1478917209.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:10.429Z,1478917210.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:10.840Z,1478917210.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:11.636Z,1478917211.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:12.432Z,1478917212.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:12.928Z,1478917212.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:13.724Z,1478917213.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:14.391Z,1478917214.391 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T02:15:14.2Z
2016-11-12T02:20:14.392Z,1478917214.392 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T02:20:14.392Z,1478917214.392 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T02:20:14.521Z,1478917214.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:15.276Z,1478917215.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:16.072Z,1478917216.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:16.869Z,1478917216.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:17.280Z,1478917217.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:18.076Z,1478917218.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:18.808Z,1478917218.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:19.287Z,1478917219.287 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0500.lzma
2016-11-12T02:20:19.604Z,1478917219.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:20.090Z,1478917220.090 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0500.lzma.bak
2016-11-12T02:20:20.090Z,1478917220.090 [DataOverHttps](INFO): SBD MOMSN=4555989
2016-11-12T02:20:20.401Z,1478917220.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:20.820Z,1478917220.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:21.616Z,1478917221.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:22.413Z,1478917222.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:22.824Z,1478917222.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:23.620Z,1478917223.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:24.416Z,1478917224.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:24.976Z,1478917224.976 [NAL9602](INFO): Powering down
2016-11-12T02:20:25.212Z,1478917225.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:25.632Z,1478917225.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:26.428Z,1478917226.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:26.888Z,1478917226.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:27.684Z,1478917227.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:28.480Z,1478917228.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:29.252Z,1478917229.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:30.048Z,1478917230.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:30.181Z,1478917230.181 [DataOverHttps](INFO): Sending 164 bytes from file Logs/20161111T044527/Express0501.lzma
2016-11-12T02:20:30.845Z,1478917230.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:30.977Z,1478917230.977 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0501.lzma.bak
2016-11-12T02:20:30.977Z,1478917230.977 [DataOverHttps](INFO): SBD MOMSN=4555991
2016-11-12T02:20:31.256Z,1478917231.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:32.052Z,1478917232.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:32.456Z,1478917232.456 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T02:20:32.456Z,1478917232.456 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T02:20:32.456Z,1478917232.456 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T02:20:32.768Z,1478917232.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:33.564Z,1478917233.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:34.361Z,1478917234.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:34.772Z,1478917234.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:35.568Z,1478917235.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:36.365Z,1478917236.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:36.776Z,1478917236.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:37.572Z,1478917237.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:38.369Z,1478917238.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:38.780Z,1478917238.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:39.578Z,1478917239.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:40.372Z,1478917240.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:40.860Z,1478917240.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:41.656Z,1478917241.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:42.452Z,1478917242.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:43.212Z,1478917243.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:44.008Z,1478917244.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:44.805Z,1478917244.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:45.216Z,1478917245.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:46.012Z,1478917246.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:46.748Z,1478917246.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:47.544Z,1478917247.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:48.345Z,1478917248.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:48.756Z,1478917248.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:49.552Z,1478917249.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:50.349Z,1478917250.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:50.760Z,1478917250.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:51.556Z,1478917251.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:52.353Z,1478917252.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:52.764Z,1478917252.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:53.560Z,1478917253.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:54.356Z,1478917254.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:54.836Z,1478917254.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:55.632Z,1478917255.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:56.430Z,1478917256.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:57.192Z,1478917257.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:57.990Z,1478917257.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:58.785Z,1478917258.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:59.196Z,1478917259.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:20:59.992Z,1478917259.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:00.736Z,1478917260.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:01.532Z,1478917261.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:02.331Z,1478917262.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:02.740Z,1478917262.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:03.536Z,1478917263.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:04.332Z,1478917264.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:04.740Z,1478917264.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:05.536Z,1478917265.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:06.332Z,1478917266.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:06.740Z,1478917266.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:07.536Z,1478917267.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:08.332Z,1478917268.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:08.800Z,1478917268.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:09.596Z,1478917269.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:10.393Z,1478917270.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:11.160Z,1478917271.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:11.956Z,1478917271.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:12.753Z,1478917272.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:13.164Z,1478917273.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:13.960Z,1478917273.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:14.696Z,1478917274.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:15.492Z,1478917275.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:16.288Z,1478917276.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:16.631Z,1478917276.631 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T02:21:16.631Z,1478917276.631 [BPC1] Data Fault, FailCount= 1
2016-11-12T02:21:16.631Z,1478917276.631 [BPC1](ERROR): Data Fault
2016-11-12T02:21:16.693Z,1478917276.693 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T02:21:16.704Z,1478917276.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:17.500Z,1478917277.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:17.899Z,1478917277.899 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:21:17.899Z,1478917277.899 [BPC1] No Fault, FailCount= 1
2016-11-12T02:21:18.226Z,1478917278.226 [PNI_TCM](ERROR): CRC does not match. Expected:0x2322 got:0x4493
2016-11-12T02:21:18.297Z,1478917278.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:18.708Z,1478917278.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:19.504Z,1478917279.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:20.301Z,1478917280.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:20.712Z,1478917280.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:21.418Z,1478917281.418 [PNI_TCM](ERROR): CRC does not match. Expected:0x8329 got:0x16962
2016-11-12T02:21:21.508Z,1478917281.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:22.304Z,1478917282.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:22.792Z,1478917282.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:23.017Z,1478917283.017 [PNI_TCM](ERROR): CRC does not match. Expected:0x39138 got:0x7490
2016-11-12T02:21:23.588Z,1478917283.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:24.384Z,1478917284.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:25.152Z,1478917285.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:25.948Z,1478917285.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:26.744Z,1478917286.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:27.156Z,1478917287.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:27.952Z,1478917287.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:28.696Z,1478917288.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:29.492Z,1478917289.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:30.289Z,1478917290.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:30.700Z,1478917290.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:31.496Z,1478917291.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:32.292Z,1478917292.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:32.700Z,1478917292.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:33.082Z,1478917293.082 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:21:33.082Z,1478917293.082 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 39
2016-11-12T02:21:33.082Z,1478917293.082 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:21:33.116Z,1478917293.116 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:21:33.496Z,1478917293.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:34.292Z,1478917294.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:34.700Z,1478917294.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:35.496Z,1478917295.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:36.292Z,1478917296.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:36.518Z,1478917296.518 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:21:36.518Z,1478917296.518 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 39
2016-11-12T02:21:36.637Z,1478917296.638 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:21:36.638Z,1478917296.638 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:21:36.638Z,1478917296.638 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:21:36.772Z,1478917296.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:37.568Z,1478917297.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:38.364Z,1478917298.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:39.120Z,1478917299.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:39.916Z,1478917299.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:40.713Z,1478917300.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:41.124Z,1478917301.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:41.920Z,1478917301.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:42.664Z,1478917302.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:43.460Z,1478917303.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:44.257Z,1478917304.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:44.668Z,1478917304.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:45.464Z,1478917305.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:46.261Z,1478917306.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:46.672Z,1478917306.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:47.468Z,1478917307.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:48.264Z,1478917308.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:48.672Z,1478917308.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:49.468Z,1478917309.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:50.264Z,1478917310.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:50.748Z,1478917310.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:51.544Z,1478917311.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:51.770Z,1478917311.770 [BPC1](ERROR): Failed to receive battery data
2016-11-12T02:21:51.770Z,1478917311.770 [BPC1] Communications Fault, FailCount= 1
2016-11-12T02:21:51.770Z,1478917311.770 [BPC1](ERROR): Communications Fault
2016-11-12T02:21:51.831Z,1478917311.831 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T02:21:52.340Z,1478917312.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:53.014Z,1478917313.014 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:21:53.014Z,1478917313.014 [BPC1] No Fault, FailCount= 1
2016-11-12T02:21:53.100Z,1478917313.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:53.365Z,1478917313.365 [PNI_TCM](ERROR): CRC does not match. Expected:0x28788 got:0x49579
2016-11-12T02:21:53.896Z,1478917313.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:54.693Z,1478917314.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:21:55.104Z,1478917315.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:22:19.492Z,1478917339.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:22:20.288Z,1478917340.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:22:21.052Z,1478917341.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:22:21.848Z,1478917341.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:22:22.564Z,1478917342.564 [BPC1](ERROR): Failed to receive battery data
2016-11-12T02:22:22.564Z,1478917342.564 [BPC1] Communications Fault, FailCount= 1
2016-11-12T02:22:22.564Z,1478917342.564 [BPC1](ERROR): Communications Fault
2016-11-12T02:22:22.593Z,1478917342.593 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T02:22:22.645Z,1478917342.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:22:23.056Z,1478917343.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:22:23.830Z,1478917343.829 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:22:23.830Z,1478917343.830 [BPC1] No Fault, FailCount= 1
2016-11-12T02:23:01.432Z,1478917381.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:23:02.228Z,1478917382.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:23:15.408Z,1478917395.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:23:16.204Z,1478917396.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:23:29.388Z,1478917409.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:23:30.184Z,1478917410.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:24:15.305Z,1478917455.305 [BPC1](ERROR): Failed to parse message.
2016-11-12T02:24:15.305Z,1478917455.305 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T02:24:15.305Z,1478917455.305 [BPC1] Data Fault, FailCount= 1
2016-11-12T02:24:15.305Z,1478917455.305 [BPC1](ERROR): Data Fault
2016-11-12T02:24:15.366Z,1478917455.366 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T02:24:16.534Z,1478917456.534 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:24:16.535Z,1478917456.534 [BPC1] No Fault, FailCount= 1
2016-11-12T02:24:37.470Z,1478917477.470 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:24:37.470Z,1478917477.470 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 40
2016-11-12T02:24:37.470Z,1478917477.470 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:24:37.548Z,1478917477.548 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:24:37.667Z,1478917477.667 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:24:37.671Z,1478917477.671 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 40
2016-11-12T02:24:38.024Z,1478917478.024 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:24:38.024Z,1478917478.024 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:24:38.025Z,1478917478.025 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:25:10.442Z,1478917510.442 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T02:25:10.442Z,1478917510.442 [BPC1] Data Fault, FailCount= 1
2016-11-12T02:25:10.442Z,1478917510.442 [BPC1](ERROR): Data Fault
2016-11-12T02:25:10.537Z,1478917510.537 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T02:25:11.643Z,1478917511.643 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:25:11.643Z,1478917511.643 [BPC1] No Fault, FailCount= 1
2016-11-12T02:25:32.822Z,1478917532.822 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T02:25:32.822Z,1478917532.822 [Default:CheckIn:C.Wait] Stopped
2016-11-12T02:25:32.822Z,1478917532.822 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T02:25:32.822Z,1478917532.822 [Default:CheckIn:D] Running Loop=1
2016-11-12T02:25:33.221Z,1478917533.221 [Default:CheckIn:D] Stopped
2016-11-12T02:25:33.221Z,1478917533.221 [Default:CheckIn:E] Running Loop=1
2016-11-12T02:25:33.640Z,1478917533.640 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1295.531901 min 
2016-11-12T02:25:33.640Z,1478917533.640 [Default:CheckIn:E] Stopped
2016-11-12T02:25:33.640Z,1478917533.640 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T02:25:33.641Z,1478917533.641 [Default:CheckIn] Stopped
2016-11-12T02:25:33.641Z,1478917533.641 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T02:25:33.641Z,1478917533.641 [Default:CheckIn](INFO): Running loop #126
2016-11-12T02:25:33.641Z,1478917533.641 [Default:CheckIn] Running Loop=126
2016-11-12T02:25:33.641Z,1478917533.641 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T02:25:33.641Z,1478917533.641 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T02:25:34.369Z,1478917534.369 [NAL9602](INFO): Powering up
2016-11-12T02:25:45.461Z,1478917545.461 [NAL9602](INFO): NAL9602 initialized
2016-11-12T02:25:49.176Z,1478917549.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:25:49.972Z,1478917549.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:26:03.160Z,1478917563.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:26:03.956Z,1478917563.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:26:04.262Z,1478917564.262 [NAL9602](INFO): SBD MO Status=2, MOMSN=372, MT Status=2, MTMSN=0
2016-11-12T02:26:04.262Z,1478917564.262 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-12T02:26:28.332Z,1478917588.332 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T02:26:47.094Z,1478917607.094 [NAL9602](INFO): SBD MO Status=2, MOMSN=372, MT Status=2, MTMSN=0
2016-11-12T02:26:47.094Z,1478917607.094 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-12T02:27:34.726Z,1478917654.726 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T02:27:34.726Z,1478917654.727 [BPC1] Data Fault, FailCount= 1
2016-11-12T02:27:34.727Z,1478917654.727 [BPC1](ERROR): Data Fault
2016-11-12T02:27:34.792Z,1478917654.792 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T02:27:38.380Z,1478917658.380 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:27:38.380Z,1478917658.380 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 41
2016-11-12T02:27:38.380Z,1478917658.380 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:27:38.394Z,1478917658.394 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:27:38.515Z,1478917658.515 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:27:38.515Z,1478917658.515 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 41
2016-11-12T02:27:38.878Z,1478917658.878 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:27:38.878Z,1478917658.878 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:27:38.879Z,1478917658.879 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:27:38.912Z,1478917658.912 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:27:38.913Z,1478917658.912 [BPC1] No Fault, FailCount= 1
2016-11-12T02:27:56.821Z,1478917676.821 [NAL9602](INFO): SBD MO Status=2, MOMSN=372, MT Status=2, MTMSN=0
2016-11-12T02:27:56.822Z,1478917676.822 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-12T02:28:08.964Z,1478917688.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:09.760Z,1478917689.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:10.548Z,1478917690.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:11.344Z,1478917691.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:12.140Z,1478917692.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:12.548Z,1478917692.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:13.344Z,1478917693.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:14.080Z,1478917694.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:14.876Z,1478917694.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:15.672Z,1478917695.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:16.096Z,1478917696.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:16.892Z,1478917696.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:17.688Z,1478917697.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:18.096Z,1478917698.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:18.892Z,1478917698.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:19.688Z,1478917699.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:20.096Z,1478917700.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:20.892Z,1478917700.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:21.688Z,1478917701.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:22.140Z,1478917702.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:22.936Z,1478917702.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:23.732Z,1478917703.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:24.528Z,1478917704.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:25.324Z,1478917705.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:26.120Z,1478917706.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:26.528Z,1478917706.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:27.325Z,1478917707.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:28.036Z,1478917708.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:28.832Z,1478917708.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:29.628Z,1478917709.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:30.040Z,1478917710.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:30.836Z,1478917710.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:31.633Z,1478917711.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:32.044Z,1478917712.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:32.840Z,1478917712.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:33.637Z,1478917713.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:34.044Z,1478917714.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:34.840Z,1478917714.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:35.636Z,1478917715.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:36.120Z,1478917716.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:36.916Z,1478917716.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:37.712Z,1478917717.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:38.480Z,1478917718.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:39.276Z,1478917719.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:40.072Z,1478917720.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:40.484Z,1478917720.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:46.836Z,1478917726.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:47.632Z,1478917727.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:48.040Z,1478917728.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:48.836Z,1478917728.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:49.632Z,1478917729.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:50.108Z,1478917730.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:50.904Z,1478917730.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:51.700Z,1478917731.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:52.452Z,1478917732.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:53.248Z,1478917733.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:54.045Z,1478917734.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:54.464Z,1478917734.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:55.260Z,1478917735.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:56.036Z,1478917736.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:56.833Z,1478917736.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:57.628Z,1478917737.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:58.036Z,1478917738.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:58.832Z,1478917738.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:28:59.628Z,1478917739.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:00.036Z,1478917740.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:00.832Z,1478917740.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:01.628Z,1478917741.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:02.036Z,1478917742.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:02.832Z,1478917742.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:03.628Z,1478917743.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:04.080Z,1478917744.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:04.876Z,1478917744.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:05.672Z,1478917745.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:06.428Z,1478917746.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:07.224Z,1478917747.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:08.021Z,1478917748.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:08.448Z,1478917748.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:09.244Z,1478917749.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:09.956Z,1478917749.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:10.752Z,1478917750.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:11.549Z,1478917751.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:12.048Z,1478917752.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:12.844Z,1478917752.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:13.648Z,1478917753.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:14.056Z,1478917754.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:14.852Z,1478917754.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:15.648Z,1478917755.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:16.056Z,1478917756.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:16.852Z,1478917756.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:17.648Z,1478917757.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:18.060Z,1478917758.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:18.856Z,1478917758.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:19.652Z,1478917759.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:20.408Z,1478917760.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:21.204Z,1478917761.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:22.001Z,1478917762.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:22.412Z,1478917762.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:23.208Z,1478917763.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:23.940Z,1478917763.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:24.736Z,1478917764.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:25.533Z,1478917765.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:25.944Z,1478917765.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:26.740Z,1478917766.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:27.538Z,1478917767.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:27.948Z,1478917767.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:28.744Z,1478917768.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:29.541Z,1478917769.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:29.952Z,1478917769.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:30.748Z,1478917770.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:31.546Z,1478917771.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:32.044Z,1478917772.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:32.840Z,1478917772.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:33.636Z,1478917773.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:34.432Z,1478917774.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:35.228Z,1478917775.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:36.024Z,1478917776.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:36.432Z,1478917776.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:37.228Z,1478917777.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:37.916Z,1478917777.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:38.712Z,1478917778.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:39.509Z,1478917779.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:39.920Z,1478917779.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:40.716Z,1478917780.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:41.513Z,1478917781.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:41.924Z,1478917781.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:42.720Z,1478917782.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:43.517Z,1478917783.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:43.928Z,1478917783.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:44.724Z,1478917784.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:45.520Z,1478917785.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:46.056Z,1478917786.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:46.852Z,1478917786.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:47.648Z,1478917787.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:48.368Z,1478917788.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:49.164Z,1478917789.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:49.961Z,1478917789.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:50.392Z,1478917790.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:51.190Z,1478917791.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:51.892Z,1478917791.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:52.688Z,1478917792.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:53.485Z,1478917793.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:53.896Z,1478917793.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:54.692Z,1478917794.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:55.489Z,1478917795.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:55.900Z,1478917795.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:56.696Z,1478917796.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:57.495Z,1478917797.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:57.912Z,1478917797.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:58.708Z,1478917798.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:59.504Z,1478917799.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:29:59.000Z,1478917800.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:00.796Z,1478917800.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:01.592Z,1478917801.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:02.356Z,1478917802.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:03.152Z,1478917803.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:03.949Z,1478917803.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:04.360Z,1478917804.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:05.156Z,1478917805.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:05.872Z,1478917805.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:06.668Z,1478917806.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:07.467Z,1478917807.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:07.884Z,1478917807.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:08.680Z,1478917808.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:09.477Z,1478917809.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:09.892Z,1478917809.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:10.689Z,1478917810.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:11.485Z,1478917811.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:11.896Z,1478917811.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:12.692Z,1478917812.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:13.488Z,1478917813.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:13.993Z,1478917813.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:14.790Z,1478917814.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:15.588Z,1478917815.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:16.324Z,1478917816.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:17.120Z,1478917817.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:17.917Z,1478917817.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:18.328Z,1478917818.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:19.124Z,1478917819.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:19.852Z,1478917819.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:20.648Z,1478917820.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:21.445Z,1478917821.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:21.856Z,1478917821.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:22.652Z,1478917822.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:23.449Z,1478917823.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:23.864Z,1478917823.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:24.660Z,1478917824.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:25.457Z,1478917825.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:25.868Z,1478917825.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:26.664Z,1478917826.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:27.460Z,1478917827.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:27.944Z,1478917827.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:28.740Z,1478917828.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:29.536Z,1478917829.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:30.296Z,1478917830.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:31.092Z,1478917831.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:31.889Z,1478917831.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:32.300Z,1478917832.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:33.096Z,1478917833.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:33.820Z,1478917833.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:34.032Z,1478917834.032 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T02:25:33.6Z
2016-11-12T02:30:34.032Z,1478917834.032 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T02:30:34.032Z,1478917834.032 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T02:30:34.616Z,1478917834.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:35.413Z,1478917835.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:35.824Z,1478917835.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:36.620Z,1478917836.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:37.416Z,1478917837.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:37.828Z,1478917837.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:38.624Z,1478917838.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:39.082Z,1478917839.082 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:30:39.082Z,1478917839.082 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 42
2016-11-12T02:30:39.082Z,1478917839.082 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:30:39.108Z,1478917839.108 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:30:39.124Z,1478917839.124 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0504.lzma
2016-11-12T02:30:39.235Z,1478917839.235 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:30:39.235Z,1478917839.235 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 42
2016-11-12T02:30:39.431Z,1478917839.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:39.617Z,1478917839.617 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:30:39.617Z,1478917839.617 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:30:39.618Z,1478917839.618 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:30:39.844Z,1478917839.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:39.922Z,1478917839.922 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0504.lzma.bak
2016-11-12T02:30:39.922Z,1478917839.922 [DataOverHttps](INFO): SBD MOMSN=4555995
2016-11-12T02:30:40.640Z,1478917840.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:41.436Z,1478917841.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:41.912Z,1478917841.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:42.708Z,1478917842.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:43.504Z,1478917843.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:44.280Z,1478917844.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:45.076Z,1478917845.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:45.873Z,1478917845.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:46.284Z,1478917846.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:30:50.023Z,1478917850.023 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-12T02:30:50.136Z,1478917850.136 [DataOverHttps](INFO): Sending 123 bytes from file Logs/20161111T044527/Express0505.lzma
2016-11-12T02:30:50.926Z,1478917850.926 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0505.lzma.bak
2016-11-12T02:30:50.926Z,1478917850.926 [DataOverHttps](INFO): SBD MOMSN=4555997
2016-11-12T02:30:52.420Z,1478917852.420 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T02:30:52.420Z,1478917852.420 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T02:30:52.420Z,1478917852.420 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T02:30:55.992Z,1478917855.992 [NAL9602](INFO): Powering down
2016-11-12T02:31:24.636Z,1478917884.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:31:25.432Z,1478917885.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:31:26.547Z,1478917886.547 [BPC1](ERROR): Failed to receive battery data
2016-11-12T02:31:26.547Z,1478917886.547 [BPC1] Communications Fault, FailCount= 1
2016-11-12T02:31:26.548Z,1478917886.547 [BPC1](ERROR): Communications Fault
2016-11-12T02:31:26.609Z,1478917886.609 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T02:31:27.883Z,1478917887.883 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:31:27.883Z,1478917887.883 [BPC1] No Fault, FailCount= 1
2016-11-12T02:31:52.584Z,1478917912.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:31:53.380Z,1478917913.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:32:14.967Z,1478917934.967 [BPC1](ERROR): Failed to receive battery data
2016-11-12T02:32:14.967Z,1478917934.967 [BPC1] Communications Fault, FailCount= 1
2016-11-12T02:32:14.967Z,1478917934.967 [BPC1](ERROR): Communications Fault
2016-11-12T02:32:15.033Z,1478917935.033 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T02:32:16.221Z,1478917936.221 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:32:16.221Z,1478917936.221 [BPC1] No Fault, FailCount= 1
2016-11-12T02:33:39.688Z,1478918019.688 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:33:39.688Z,1478918019.688 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 43
2016-11-12T02:33:39.688Z,1478918019.688 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:33:39.723Z,1478918019.723 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:33:40.142Z,1478918020.142 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:33:40.142Z,1478918020.142 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 43
2016-11-12T02:33:40.492Z,1478918020.492 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:33:40.493Z,1478918020.493 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:33:40.493Z,1478918020.493 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:33:48.873Z,1478918028.872 [BPC1](ERROR): Failed to parse message.
2016-11-12T02:33:48.873Z,1478918028.873 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T02:33:48.873Z,1478918028.873 [BPC1] Data Fault, FailCount= 1
2016-11-12T02:33:48.873Z,1478918028.873 [BPC1](ERROR): Data Fault
2016-11-12T02:33:48.902Z,1478918028.902 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T02:33:50.111Z,1478918030.111 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:33:50.111Z,1478918030.111 [BPC1] No Fault, FailCount= 1
2016-11-12T02:35:28.082Z,1478918128.082 [PNI_TCM](ERROR): CRC does not match. Expected:0x48990 got:0x5627
2016-11-12T02:35:28.481Z,1478918128.481 [PNI_TCM](ERROR): CRC does not match. Expected:0x38238 got:0x49152
2016-11-12T02:35:30.088Z,1478918130.088 [PNI_TCM](ERROR): CRC does not match. Expected:0x53439 got:0x4479
2016-11-12T02:35:34.481Z,1478918134.481 [PNI_TCM](ERROR): CRC does not match. Expected:0x3325 got:0x1857
2016-11-12T02:35:52.906Z,1478918152.906 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T02:35:52.906Z,1478918152.906 [Default:CheckIn:C.Wait] Stopped
2016-11-12T02:35:52.906Z,1478918152.906 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T02:35:52.906Z,1478918152.906 [Default:CheckIn:D] Running Loop=1
2016-11-12T02:35:53.310Z,1478918153.309 [Default:CheckIn:D] Stopped
2016-11-12T02:35:53.310Z,1478918153.310 [Default:CheckIn:E] Running Loop=1
2016-11-12T02:35:53.744Z,1478918153.744 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1305.866667 min 
2016-11-12T02:35:53.745Z,1478918153.745 [Default:CheckIn:E] Stopped
2016-11-12T02:35:53.745Z,1478918153.745 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T02:35:53.745Z,1478918153.745 [Default:CheckIn] Stopped
2016-11-12T02:35:53.745Z,1478918153.745 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T02:35:53.745Z,1478918153.745 [Default:CheckIn](INFO): Running loop #127
2016-11-12T02:35:53.745Z,1478918153.745 [Default:CheckIn] Running Loop=127
2016-11-12T02:35:53.746Z,1478918153.746 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T02:35:53.746Z,1478918153.746 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T02:35:57.317Z,1478918157.317 [NAL9602](INFO): Powering up
2016-11-12T02:36:08.493Z,1478918168.493 [NAL9602](INFO): NAL9602 initialized
2016-11-12T02:36:09.293Z,1478918169.293 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-12T02:36:09.293Z,1478918169.293 [NAL9602] Data Fault, FailCount= 2
2016-11-12T02:36:09.293Z,1478918169.293 [NAL9602](ERROR): Data Fault
2016-11-12T02:36:09.400Z,1478918169.399 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T02:36:09.701Z,1478918169.701 [NAL9602](INFO): Powering down
2016-11-12T02:36:10.573Z,1478918170.573 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T02:36:10.573Z,1478918170.573 [NAL9602] No Fault, FailCount= 2
2016-11-12T02:36:14.894Z,1478918174.894 [NAL9602](INFO): Powering up NAL9602
2016-11-12T02:36:26.097Z,1478918186.097 [NAL9602](INFO): NAL9602 initialized
2016-11-12T02:36:28.573Z,1478918188.573 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T02:36:40.566Z,1478918200.566 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:36:40.566Z,1478918200.566 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 44
2016-11-12T02:36:40.566Z,1478918200.566 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:36:40.600Z,1478918200.600 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:36:40.987Z,1478918200.987 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:36:40.991Z,1478918200.991 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 44
2016-11-12T02:36:41.373Z,1478918201.373 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:36:41.373Z,1478918201.374 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:36:41.374Z,1478918201.374 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:36:45.396Z,1478918205.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:36:46.192Z,1478918206.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:37:57.469Z,1478918277.469 [NAL9602](INFO): SBD MO Status=2, MOMSN=372, MT Status=2, MTMSN=0
2016-11-12T02:37:57.470Z,1478918277.470 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-12T02:39:33.880Z,1478918373.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:39:34.676Z,1478918374.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:39:41.654Z,1478918381.654 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:39:41.655Z,1478918381.655 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 45
2016-11-12T02:39:41.655Z,1478918381.655 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:39:41.685Z,1478918381.685 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:39:42.139Z,1478918382.139 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:39:42.140Z,1478918382.139 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 45
2016-11-12T02:39:42.472Z,1478918382.472 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:39:42.473Z,1478918382.473 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:39:42.474Z,1478918382.474 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:40:53.999Z,1478918453.999 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T02:35:53.7Z
2016-11-12T02:40:53.999Z,1478918453.999 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T02:40:53.999Z,1478918453.999 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T02:40:59.208Z,1478918459.208 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0508.lzma
2016-11-12T02:41:00.002Z,1478918460.002 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0508.lzma.bak
2016-11-12T02:41:00.002Z,1478918460.002 [DataOverHttps](INFO): SBD MOMSN=4556000
2016-11-12T02:41:10.177Z,1478918470.178 [DataOverHttps](INFO): Sending 214 bytes from file Logs/20161111T044527/Express0509.lzma
2016-11-12T02:41:10.970Z,1478918470.970 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0509.lzma.bak
2016-11-12T02:41:10.970Z,1478918470.970 [DataOverHttps](INFO): SBD MOMSN=4556002
2016-11-12T02:41:11.708Z,1478918471.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:12.384Z,1478918472.384 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T02:41:12.384Z,1478918472.384 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T02:41:12.384Z,1478918472.384 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T02:41:12.504Z,1478918472.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:13.276Z,1478918473.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:14.072Z,1478918474.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:14.868Z,1478918474.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:15.280Z,1478918475.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:16.076Z,1478918476.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:16.788Z,1478918476.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:17.584Z,1478918477.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:18.388Z,1478918478.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:18.844Z,1478918478.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:19.642Z,1478918479.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:20.436Z,1478918480.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:20.844Z,1478918480.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:21.640Z,1478918481.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:22.437Z,1478918482.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:22.844Z,1478918482.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:23.640Z,1478918483.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:24.437Z,1478918484.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:24.880Z,1478918484.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:25.676Z,1478918485.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:26.472Z,1478918486.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:27.240Z,1478918487.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:28.036Z,1478918488.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:28.832Z,1478918488.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:29.200Z,1478918489.201 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-12T02:41:29.244Z,1478918489.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:30.040Z,1478918490.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:30.760Z,1478918490.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:31.556Z,1478918491.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:32.353Z,1478918492.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:32.764Z,1478918492.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:33.560Z,1478918493.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:34.368Z,1478918494.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:34.788Z,1478918494.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:34.800Z,1478918494.800 [NAL9602](INFO): Powering down
2016-11-12T02:41:35.584Z,1478918495.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:36.380Z,1478918496.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:36.788Z,1478918496.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:37.584Z,1478918497.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:38.382Z,1478918498.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:38.876Z,1478918498.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:39.672Z,1478918499.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:40.468Z,1478918500.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:41.264Z,1478918501.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:41.672Z,1478918501.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:42.468Z,1478918502.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:43.208Z,1478918503.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:49.552Z,1478918509.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:50.349Z,1478918510.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:50.760Z,1478918510.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:51.556Z,1478918511.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:52.352Z,1478918512.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:52.876Z,1478918512.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:53.672Z,1478918513.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:54.468Z,1478918514.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:55.192Z,1478918515.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:55.988Z,1478918515.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:56.785Z,1478918516.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:41:57.200Z,1478918517.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:03.524Z,1478918523.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:04.321Z,1478918524.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:04.744Z,1478918524.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:05.540Z,1478918525.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:06.336Z,1478918526.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:06.868Z,1478918526.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:07.664Z,1478918527.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:08.460Z,1478918528.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:09.172Z,1478918529.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:09.968Z,1478918529.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:10.765Z,1478918530.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:11.176Z,1478918531.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:17.504Z,1478918537.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:18.300Z,1478918538.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:18.714Z,1478918538.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:19.510Z,1478918539.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:20.304Z,1478918540.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:21.096Z,1478918541.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:21.892Z,1478918541.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:22.688Z,1478918542.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:23.192Z,1478918543.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:24.016Z,1478918544.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:24.812Z,1478918544.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:25.220Z,1478918545.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:26.016Z,1478918546.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:26.676Z,1478918546.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:27.472Z,1478918547.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:28.269Z,1478918548.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:28.684Z,1478918548.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:29.480Z,1478918549.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:30.285Z,1478918550.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:30.720Z,1478918550.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:31.516Z,1478918551.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:32.312Z,1478918552.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:32.721Z,1478918552.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:33.516Z,1478918553.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:34.312Z,1478918554.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:34.780Z,1478918554.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:35.576Z,1478918555.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:36.372Z,1478918556.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:37.168Z,1478918557.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:37.576Z,1478918557.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:38.372Z,1478918558.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:39.176Z,1478918559.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:39.584Z,1478918559.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:40.380Z,1478918560.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:40.800Z,1478918560.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:41.596Z,1478918561.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:42.392Z,1478918562.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:42.771Z,1478918562.771 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:42:42.771Z,1478918562.771 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 46
2016-11-12T02:42:42.771Z,1478918562.771 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:42:42.794Z,1478918562.794 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:42:42.800Z,1478918562.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:43.212Z,1478918563.212 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:42:43.213Z,1478918563.213 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 46
2016-11-12T02:42:43.558Z,1478918563.558 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:42:43.558Z,1478918563.559 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:42:43.559Z,1478918563.559 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:42:43.596Z,1478918563.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:44.392Z,1478918564.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:44.800Z,1478918564.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:45.596Z,1478918565.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:46.392Z,1478918566.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:46.800Z,1478918566.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:47.596Z,1478918567.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:48.392Z,1478918568.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:48.800Z,1478918568.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:49.596Z,1478918569.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:50.392Z,1478918570.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:51.114Z,1478918571.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:51.910Z,1478918571.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:52.704Z,1478918572.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:53.116Z,1478918573.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:53.912Z,1478918573.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:54.636Z,1478918574.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:55.432Z,1478918575.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:56.229Z,1478918576.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:56.640Z,1478918576.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:57.436Z,1478918577.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:58.233Z,1478918578.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:58.644Z,1478918578.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:42:59.440Z,1478918579.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:00.237Z,1478918580.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:00.648Z,1478918580.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:01.444Z,1478918581.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:02.240Z,1478918582.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:02.768Z,1478918582.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:03.564Z,1478918583.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:04.360Z,1478918584.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:05.088Z,1478918585.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:05.884Z,1478918585.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:06.681Z,1478918586.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:07.096Z,1478918587.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:07.892Z,1478918587.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:08.612Z,1478918588.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:09.408Z,1478918589.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:10.205Z,1478918590.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:10.616Z,1478918590.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:11.412Z,1478918591.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:12.209Z,1478918592.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:12.620Z,1478918592.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:13.418Z,1478918593.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:14.213Z,1478918594.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:14.632Z,1478918594.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:15.428Z,1478918595.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:16.224Z,1478918596.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:16.708Z,1478918596.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:17.504Z,1478918597.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:18.300Z,1478918598.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:19.064Z,1478918599.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:19.860Z,1478918599.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:20.657Z,1478918600.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:21.068Z,1478918601.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:21.864Z,1478918601.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:22.592Z,1478918602.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:23.388Z,1478918603.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:24.185Z,1478918604.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:24.596Z,1478918604.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:25.392Z,1478918605.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:26.199Z,1478918606.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:26.624Z,1478918606.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:27.420Z,1478918607.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:28.216Z,1478918608.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:28.624Z,1478918608.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:29.420Z,1478918609.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:30.218Z,1478918610.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:30.692Z,1478918610.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:31.488Z,1478918611.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:32.285Z,1478918612.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:33.052Z,1478918613.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:33.850Z,1478918613.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:34.651Z,1478918614.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:35.072Z,1478918615.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:35.868Z,1478918615.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:36.572Z,1478918616.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:37.368Z,1478918617.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:38.165Z,1478918618.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:38.580Z,1478918618.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:39.377Z,1478918619.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:40.173Z,1478918620.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:40.584Z,1478918620.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:41.380Z,1478918621.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:42.177Z,1478918622.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:42.588Z,1478918622.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:43.384Z,1478918623.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:44.180Z,1478918624.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:44.664Z,1478918624.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:45.460Z,1478918625.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:46.256Z,1478918626.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:47.024Z,1478918627.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:47.820Z,1478918627.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:48.617Z,1478918628.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:49.028Z,1478918629.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:49.824Z,1478918629.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:50.552Z,1478918630.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:51.348Z,1478918631.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:52.146Z,1478918632.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:52.556Z,1478918632.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:53.352Z,1478918633.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:54.149Z,1478918634.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:54.560Z,1478918634.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:55.356Z,1478918635.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:56.152Z,1478918636.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:56.564Z,1478918636.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:57.360Z,1478918637.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:58.156Z,1478918638.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:58.640Z,1478918638.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:43:59.436Z,1478918639.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:00.232Z,1478918640.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:01.004Z,1478918641.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:01.800Z,1478918641.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:02.596Z,1478918642.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:03.008Z,1478918643.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:03.804Z,1478918643.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:04.540Z,1478918644.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:05.336Z,1478918645.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:06.132Z,1478918646.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:06.544Z,1478918646.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:07.340Z,1478918647.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:08.137Z,1478918648.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:08.548Z,1478918648.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:08.849Z,1478918648.849 [PNI_TCM](ERROR): CRC does not match. Expected:0x38410 got:0x45255
2016-11-12T02:44:09.252Z,1478918649.252 [PNI_TCM](ERROR): CRC does not match. Expected:0x12383 got:0x28357
2016-11-12T02:44:09.344Z,1478918649.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:10.141Z,1478918650.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:10.552Z,1478918650.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:11.348Z,1478918651.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:12.144Z,1478918652.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:12.620Z,1478918652.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:13.418Z,1478918653.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:14.212Z,1478918654.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:14.996Z,1478918654.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:15.792Z,1478918655.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:16.589Z,1478918656.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:16.703Z,1478918656.703 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-12T02:44:16.703Z,1478918656.703 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-12T02:44:16.704Z,1478918656.704 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-12T02:44:16.704Z,1478918656.704 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-12T02:44:16.704Z,1478918656.704 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-12T02:44:16.705Z,1478918656.705 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-12T02:44:16.705Z,1478918656.705 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-12T02:44:16.706Z,1478918656.706 [PNI_TCM](ERROR): CRC does not match. Expected:0x9208 got:0x16830
2016-11-12T02:44:16.000Z,1478918657.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:17.796Z,1478918657.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:18.449Z,1478918658.449 [PNI_TCM](ERROR): CRC does not match. Expected:0x40083 got:0x23559
2016-11-12T02:44:18.536Z,1478918658.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:19.332Z,1478918659.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:20.045Z,1478918660.046 [PNI_TCM](ERROR): CRC does not match. Expected:0x43191 got:0x40678
2016-11-12T02:44:20.128Z,1478918660.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:20.540Z,1478918660.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:21.336Z,1478918661.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:22.132Z,1478918662.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:22.540Z,1478918662.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:23.336Z,1478918663.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:24.132Z,1478918664.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:24.540Z,1478918664.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:25.336Z,1478918665.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:26.132Z,1478918666.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:26.592Z,1478918666.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:27.388Z,1478918667.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:28.184Z,1478918668.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:28.968Z,1478918668.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:29.764Z,1478918669.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:30.560Z,1478918670.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:44:30.972Z,1478918670.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:45:43.632Z,1478918743.632 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:45:43.632Z,1478918743.632 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 47
2016-11-12T02:45:43.632Z,1478918743.632 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:45:43.646Z,1478918743.646 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:45:44.094Z,1478918744.095 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:45:44.095Z,1478918744.095 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 47
2016-11-12T02:45:44.411Z,1478918744.411 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:45:44.412Z,1478918744.411 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:45:44.412Z,1478918744.412 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:46:12.815Z,1478918772.815 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T02:46:12.815Z,1478918772.815 [Default:CheckIn:C.Wait] Stopped
2016-11-12T02:46:12.815Z,1478918772.815 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T02:46:12.815Z,1478918772.815 [Default:CheckIn:D] Running Loop=1
2016-11-12T02:46:13.220Z,1478918773.220 [Default:CheckIn:D] Stopped
2016-11-12T02:46:13.220Z,1478918773.220 [Default:CheckIn:E] Running Loop=1
2016-11-12T02:46:13.623Z,1478918773.623 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1316.198437 min 
2016-11-12T02:46:13.624Z,1478918773.624 [Default:CheckIn:E] Stopped
2016-11-12T02:46:13.624Z,1478918773.624 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T02:46:13.624Z,1478918773.624 [Default:CheckIn] Stopped
2016-11-12T02:46:13.624Z,1478918773.624 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T02:46:13.624Z,1478918773.624 [Default:CheckIn](INFO): Running loop #128
2016-11-12T02:46:13.624Z,1478918773.624 [Default:CheckIn] Running Loop=128
2016-11-12T02:46:13.624Z,1478918773.625 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T02:46:13.625Z,1478918773.625 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T02:46:17.056Z,1478918777.056 [NAL9602](INFO): Powering up
2016-11-12T02:46:21.452Z,1478918781.452 [PNI_TCM](ERROR): CRC does not match. Expected:0x50702 got:0x64702
2016-11-12T02:46:23.054Z,1478918783.055 [PNI_TCM](ERROR): CRC does not match. Expected:0x58670 got:0x60928
2016-11-12T02:46:24.657Z,1478918784.657 [PNI_TCM](ERROR): CRC does not match. Expected:0x24552 got:0x48987
2016-11-12T02:46:27.859Z,1478918787.859 [PNI_TCM](ERROR): CRC does not match. Expected:0x31422 got:0x1857
2016-11-12T02:46:28.233Z,1478918788.233 [NAL9602](INFO): NAL9602 initialized
2016-11-12T02:46:28.718Z,1478918788.718 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T02:46:29.025Z,1478918789.025 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-12T02:46:29.025Z,1478918789.025 [NAL9602] Data Fault, FailCount= 3
2016-11-12T02:46:29.025Z,1478918789.025 [NAL9602](ERROR): Data Fault
2016-11-12T02:46:29.131Z,1478918789.131 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T02:46:29.425Z,1478918789.425 [NAL9602](INFO): Powering down
2016-11-12T02:46:30.297Z,1478918790.297 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T02:46:30.297Z,1478918790.297 [NAL9602] No Fault, FailCount= 3
2016-11-12T02:46:34.624Z,1478918794.625 [NAL9602](INFO): Powering up NAL9602
2016-11-12T02:46:45.432Z,1478918805.432 [NAL9602](INFO): NAL9602 initialized
2016-11-12T02:47:15.152Z,1478918835.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:47:15.948Z,1478918835.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:47:29.116Z,1478918849.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:47:29.912Z,1478918849.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:47:43.104Z,1478918863.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:47:43.900Z,1478918863.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:48:29.257Z,1478918909.257 [PNI_TCM](ERROR): CRC does not match. Expected:0x8333 got:0x64638
2016-11-12T02:48:30.846Z,1478918910.846 [PNI_TCM](ERROR): CRC does not match. Expected:0x45351 got:0x37390
2016-11-12T02:48:31.258Z,1478918911.258 [PNI_TCM](ERROR): CRC does not match. Expected:0x54479 got:0x33481
2016-11-12T02:48:32.455Z,1478918912.455 [PNI_TCM](ERROR): CRC does not match. Expected:0x57525 got:0x50985
2016-11-12T02:48:35.659Z,1478918915.659 [PNI_TCM](ERROR): CRC does not match. Expected:0x16216 got:0x43962
2016-11-12T02:48:38.846Z,1478918918.846 [PNI_TCM](ERROR): CRC does not match. Expected:0x47022 got:0x16913
2016-11-12T02:48:44.485Z,1478918924.485 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:48:44.485Z,1478918924.485 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 48
2016-11-12T02:48:44.485Z,1478918924.485 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:48:44.498Z,1478918924.498 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:48:44.906Z,1478918924.906 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:48:44.906Z,1478918924.907 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 48
2016-11-12T02:48:45.317Z,1478918925.317 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:48:45.318Z,1478918925.318 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:48:45.318Z,1478918925.318 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:49:48.908Z,1478918988.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:49:49.704Z,1478918989.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:50:48.325Z,1478919048.325 [BPC1](ERROR): Failed to receive battery data
2016-11-12T02:50:48.325Z,1478919048.325 [BPC1] Communications Fault, FailCount= 1
2016-11-12T02:50:48.325Z,1478919048.325 [BPC1](ERROR): Communications Fault
2016-11-12T02:50:48.388Z,1478919048.388 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T02:50:49.604Z,1478919049.604 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:50:49.604Z,1478919049.604 [BPC1] No Fault, FailCount= 1
2016-11-12T02:51:14.024Z,1478919074.024 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T02:46:13.6Z
2016-11-12T02:51:14.024Z,1478919074.024 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T02:51:14.024Z,1478919074.024 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T02:51:18.847Z,1478919078.847 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0512.lzma
2016-11-12T02:51:19.681Z,1478919079.681 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0512.lzma.bak
2016-11-12T02:51:19.682Z,1478919079.681 [DataOverHttps](INFO): SBD MOMSN=4556007
2016-11-12T02:51:29.517Z,1478919089.517 [PNI_TCM](ERROR): CRC does not match. Expected:0x8613 got:0x1857
2016-11-12T02:51:29.518Z,1478919089.518 [PNI_TCM](ERROR): CRC does not match. Expected:0x11389 got:0x1857
2016-11-12T02:51:29.518Z,1478919089.518 [PNI_TCM](ERROR): CRC does not match. Expected:0x12429 got:0x1857
2016-11-12T02:51:29.519Z,1478919089.519 [PNI_TCM](ERROR): CRC does not match. Expected:0x47222 got:0x1857
2016-11-12T02:51:29.519Z,1478919089.519 [PNI_TCM](ERROR): CRC does not match. Expected:0x7718 got:0x1857
2016-11-12T02:51:29.520Z,1478919089.520 [PNI_TCM](ERROR): CRC does not match. Expected:0x4922 got:0x1857
2016-11-12T02:51:29.520Z,1478919089.520 [PNI_TCM](ERROR): CRC does not match. Expected:0x40194 got:0x1857
2016-11-12T02:51:29.520Z,1478919089.520 [PNI_TCM](ERROR): CRC does not match. Expected:0x27695 got:0x1857
2016-11-12T02:51:29.632Z,1478919089.632 [DataOverHttps](INFO): Sending 235 bytes from file Logs/20161111T044527/Express0513.lzma
2016-11-12T02:51:30.434Z,1478919090.434 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0513.lzma.bak
2016-11-12T02:51:30.434Z,1478919090.434 [DataOverHttps](INFO): SBD MOMSN=4556009
2016-11-12T02:51:31.893Z,1478919091.893 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T02:51:31.893Z,1478919091.893 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T02:51:31.893Z,1478919091.893 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T02:51:39.535Z,1478919099.535 [BPC1](ERROR): Failed to receive battery data
2016-11-12T02:51:39.535Z,1478919099.535 [BPC1] Communications Fault, FailCount= 1
2016-11-12T02:51:39.551Z,1478919099.551 [BPC1](ERROR): Communications Fault
2016-11-12T02:51:39.630Z,1478919099.630 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T02:51:40.786Z,1478919100.786 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:51:40.786Z,1478919100.786 [BPC1] No Fault, FailCount= 1
2016-11-12T02:51:45.557Z,1478919105.557 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:51:45.557Z,1478919105.557 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 49
2016-11-12T02:51:45.558Z,1478919105.557 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:51:45.626Z,1478919105.626 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:51:45.992Z,1478919105.992 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:51:45.992Z,1478919105.992 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 49
2016-11-12T02:51:46.356Z,1478919106.356 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:51:46.356Z,1478919106.356 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:51:46.357Z,1478919106.357 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:51:49.084Z,1478919109.085 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-12T02:51:54.684Z,1478919114.684 [NAL9602](INFO): Powering down
2016-11-12T02:52:04.729Z,1478919124.730 [BPC1](ERROR): Failed to parse message.
2016-11-12T02:52:04.730Z,1478919124.730 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-12T02:52:04.730Z,1478919124.730 [BPC1] Data Fault, FailCount= 1
2016-11-12T02:52:04.730Z,1478919124.730 [BPC1](ERROR): Data Fault
2016-11-12T02:52:04.789Z,1478919124.789 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T02:52:05.984Z,1478919125.984 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:52:05.984Z,1478919125.984 [BPC1] No Fault, FailCount= 1
2016-11-12T02:52:36.621Z,1478919156.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:52:37.418Z,1478919157.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:14.464Z,1478919194.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:15.261Z,1478919195.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:15.672Z,1478919195.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:16.468Z,1478919196.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:16.629Z,1478919196.629 [BPC1](ERROR): Failed to receive battery data
2016-11-12T02:53:16.629Z,1478919196.629 [BPC1] Communications Fault, FailCount= 1
2016-11-12T02:53:16.629Z,1478919196.629 [BPC1](ERROR): Communications Fault
2016-11-12T02:53:16.692Z,1478919196.692 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T02:53:17.264Z,1478919197.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:17.760Z,1478919197.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:17.891Z,1478919197.891 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:53:17.891Z,1478919197.891 [BPC1] No Fault, FailCount= 1
2016-11-12T02:53:18.556Z,1478919198.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:19.352Z,1478919199.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:20.112Z,1478919200.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:20.908Z,1478919200.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:21.705Z,1478919201.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:22.116Z,1478919202.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:22.912Z,1478919202.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:23.648Z,1478919203.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:24.444Z,1478919204.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:25.241Z,1478919205.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:25.652Z,1478919205.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:26.448Z,1478919206.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:27.245Z,1478919207.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:27.656Z,1478919207.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:28.452Z,1478919208.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:29.249Z,1478919209.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:29.660Z,1478919209.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:30.456Z,1478919210.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:31.252Z,1478919211.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:31.760Z,1478919211.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:32.556Z,1478919212.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:33.352Z,1478919213.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:34.100Z,1478919214.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:34.896Z,1478919214.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:35.693Z,1478919215.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:36.104Z,1478919216.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:36.900Z,1478919216.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:37.620Z,1478919217.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:38.416Z,1478919218.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:39.213Z,1478919219.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:39.624Z,1478919219.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:40.420Z,1478919220.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:41.224Z,1478919221.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:41.644Z,1478919221.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:42.440Z,1478919222.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:43.238Z,1478919223.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:53:43.648Z,1478919223.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T02:54:05.794Z,1478919245.794 [BPC1](ERROR): Failed to receive battery data
2016-11-12T02:54:05.794Z,1478919245.794 [BPC1] Communications Fault, FailCount= 1
2016-11-12T02:54:05.794Z,1478919245.795 [BPC1](ERROR): Communications Fault
2016-11-12T02:54:05.823Z,1478919245.823 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T02:54:07.028Z,1478919247.028 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:54:07.028Z,1478919247.028 [BPC1] No Fault, FailCount= 1
2016-11-12T02:54:46.521Z,1478919286.520 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:54:46.521Z,1478919286.521 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 50
2016-11-12T02:54:46.521Z,1478919286.521 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:54:46.535Z,1478919286.535 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:54:46.953Z,1478919286.954 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:54:46.954Z,1478919286.954 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 50
2016-11-12T02:54:47.327Z,1478919287.327 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:54:47.327Z,1478919287.328 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:54:47.328Z,1478919287.328 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:56:28.856Z,1478919388.856 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T02:56:32.054Z,1478919392.054 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T02:56:32.054Z,1478919392.054 [Default:CheckIn:C.Wait] Stopped
2016-11-12T02:56:32.054Z,1478919392.054 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T02:56:32.054Z,1478919392.054 [Default:CheckIn:D] Running Loop=1
2016-11-12T02:56:32.437Z,1478919392.437 [Default:CheckIn:D] Stopped
2016-11-12T02:56:32.437Z,1478919392.437 [Default:CheckIn:E] Running Loop=1
2016-11-12T02:56:32.843Z,1478919392.843 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1326.518750 min 
2016-11-12T02:56:32.871Z,1478919392.871 [Default:CheckIn:E] Stopped
2016-11-12T02:56:32.872Z,1478919392.872 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T02:56:32.872Z,1478919392.872 [Default:CheckIn] Stopped
2016-11-12T02:56:32.872Z,1478919392.872 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T02:56:32.872Z,1478919392.872 [Default:CheckIn](INFO): Running loop #129
2016-11-12T02:56:32.872Z,1478919392.872 [Default:CheckIn] Running Loop=129
2016-11-12T02:56:32.872Z,1478919392.872 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T02:56:32.872Z,1478919392.872 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T02:56:33.589Z,1478919393.589 [NAL9602](INFO): Powering up
2016-11-12T02:56:44.685Z,1478919404.685 [NAL9602](INFO): NAL9602 initialized
2016-11-12T02:57:16.685Z,1478919436.685 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-12T02:57:16.759Z,1478919436.759 [NAL9602](FAULT): received: 
+CSQ:0

OK2, 2, 0, 0, 0

OK
2016-11-12T02:57:16.759Z,1478919436.759 [NAL9602] Data Fault, FailCount= 4
2016-11-12T02:57:16.759Z,1478919436.759 [NAL9602](ERROR): Data Fault
2016-11-12T02:57:16.860Z,1478919436.860 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T02:57:17.096Z,1478919437.096 [NAL9602](INFO): Powering down
2016-11-12T02:57:17.981Z,1478919437.981 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T02:57:17.981Z,1478919437.981 [NAL9602] No Fault, FailCount= 4
2016-11-12T02:57:22.285Z,1478919442.285 [NAL9602](INFO): Powering up NAL9602
2016-11-12T02:57:33.485Z,1478919453.485 [NAL9602](INFO): NAL9602 initialized
2016-11-12T02:57:37.314Z,1478919457.314 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-12T02:57:37.314Z,1478919457.314 [NAL9602] Data Fault, FailCount= 5
2016-11-12T02:57:37.314Z,1478919457.314 [NAL9602](ERROR): Data Fault
2016-11-12T02:57:37.447Z,1478919457.447 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T02:57:37.451Z,1478919457.451 [CBIT](CRITICAL): Data Fault in component: NAL9602
2016-11-12T02:57:37.509Z,1478919457.509 [NAL9602](INFO): Powering down
2016-11-12T02:57:47.534Z,1478919467.534 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T02:57:47.534Z,1478919467.534 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 51
2016-11-12T02:57:47.534Z,1478919467.534 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T02:57:47.591Z,1478919467.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T02:57:47.981Z,1478919467.981 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T02:57:47.981Z,1478919467.981 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 51
2016-11-12T02:57:48.311Z,1478919468.311 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T02:57:48.312Z,1478919468.312 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T02:57:48.312Z,1478919468.312 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T02:58:32.700Z,1478919512.700 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T02:58:32.701Z,1478919512.701 [BPC1] Data Fault, FailCount= 1
2016-11-12T02:58:32.701Z,1478919512.701 [BPC1](ERROR): Data Fault
2016-11-12T02:58:32.834Z,1478919512.834 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T02:58:33.927Z,1478919513.927 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T02:58:33.927Z,1478919513.927 [BPC1] No Fault, FailCount= 1
2016-11-12T02:58:46.675Z,1478919526.675 [PNI_TCM](ERROR): CRC does not match. Expected:0x16128 got:0x60928
2016-11-12T02:58:49.082Z,1478919529.082 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2016-11-12T02:58:52.676Z,1478919532.676 [PNI_TCM](ERROR): CRC does not match. Expected:0x9370 got:0x31214
2016-11-12T02:59:38.066Z,1478919578.066 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T02:59:38.067Z,1478919578.066 [NAL9602] No Fault, FailCount= 5
2016-11-12T02:59:38.090Z,1478919578.089 [NAL9602](INFO): Powering up NAL9602
2016-11-12T02:59:48.893Z,1478919588.893 [NAL9602](INFO): NAL9602 initialized
2016-11-12T03:00:26.585Z,1478919626.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.436500 seconds old.
2016-11-12T03:00:26.606Z,1478919626.606 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.455500 seconds old.
2016-11-12T03:00:26.617Z,1478919626.617 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.464300 seconds old.
2016-11-12T03:00:26.620Z,1478919626.620 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.464900 seconds old.
2016-11-12T03:00:26.622Z,1478919626.622 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.465000 seconds old.
2016-11-12T03:00:26.942Z,1478919626.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.793500 seconds old.
2016-11-12T03:00:26.945Z,1478919626.945 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.794200 seconds old.
2016-11-12T03:00:26.955Z,1478919626.955 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.794400 seconds old.
2016-11-12T03:00:26.958Z,1478919626.958 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.803100 seconds old.
2016-11-12T03:00:26.961Z,1478919626.961 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.803300 seconds old.
2016-11-12T03:00:27.335Z,1478919627.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.186800 seconds old.
2016-11-12T03:00:27.338Z,1478919627.338 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.187400 seconds old.
2016-11-12T03:00:27.341Z,1478919627.341 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.187800 seconds old.
2016-11-12T03:00:27.343Z,1478919627.343 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.188200 seconds old.
2016-11-12T03:00:27.346Z,1478919627.346 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.188400 seconds old.
2016-11-12T03:00:27.737Z,1478919627.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.588400 seconds old.
2016-11-12T03:00:27.739Z,1478919627.740 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.588900 seconds old.
2016-11-12T03:00:27.742Z,1478919627.742 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.589200 seconds old.
2016-11-12T03:00:27.744Z,1478919627.744 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.589700 seconds old.
2016-11-12T03:00:27.747Z,1478919627.747 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.589700 seconds old.
2016-11-12T03:00:28.155Z,1478919628.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.007300 seconds old.
2016-11-12T03:00:28.158Z,1478919628.158 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.007600 seconds old.
2016-11-12T03:00:28.172Z,1478919628.172 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 2.018900 seconds old.
2016-11-12T03:00:28.174Z,1478919628.174 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.019300 seconds old.
2016-11-12T03:00:28.177Z,1478919628.177 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 2.019400 seconds old.
2016-11-12T03:00:28.604Z,1478919628.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.455800 seconds old.
2016-11-12T03:00:28.607Z,1478919628.607 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.456200 seconds old.
2016-11-12T03:00:28.622Z,1478919628.622 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 2.468900 seconds old.
2016-11-12T03:00:28.632Z,1478919628.632 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.477600 seconds old.
2016-11-12T03:00:28.642Z,1478919628.642 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 2.477800 seconds old.
2016-11-12T03:00:28.950Z,1478919628.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.801600 seconds old.
2016-11-12T03:00:28.953Z,1478919628.953 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.802100 seconds old.
2016-11-12T03:00:28.955Z,1478919628.955 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 2.802400 seconds old.
2016-11-12T03:00:28.958Z,1478919628.958 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.803100 seconds old.
2016-11-12T03:00:28.961Z,1478919628.961 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 2.803400 seconds old.
2016-11-12T03:00:29.368Z,1478919629.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.220300 seconds old.
2016-11-12T03:00:29.371Z,1478919629.371 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.220700 seconds old.
2016-11-12T03:00:29.374Z,1478919629.374 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 3.220900 seconds old.
2016-11-12T03:00:29.376Z,1478919629.376 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.221300 seconds old.
2016-11-12T03:00:29.379Z,1478919629.379 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 3.221300 seconds old.
2016-11-12T03:00:29.733Z,1478919629.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.584500 seconds old.
2016-11-12T03:00:29.736Z,1478919629.736 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.585000 seconds old.
2016-11-12T03:00:29.738Z,1478919629.738 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 3.585300 seconds old.
2016-11-12T03:00:29.757Z,1478919629.757 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.602000 seconds old.
2016-11-12T03:00:29.764Z,1478919629.764 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 3.606400 seconds old.
2016-11-12T03:00:30.160Z,1478919630.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.011500 seconds old.
2016-11-12T03:00:30.162Z,1478919630.162 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.011900 seconds old.
2016-11-12T03:00:30.165Z,1478919630.165 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 4.012200 seconds old.
2016-11-12T03:00:30.167Z,1478919630.167 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.012500 seconds old.
2016-11-12T03:00:30.170Z,1478919630.170 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 4.012600 seconds old.
2016-11-12T03:00:30.535Z,1478919630.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.387100 seconds old.
2016-11-12T03:00:30.538Z,1478919630.538 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.387400 seconds old.
2016-11-12T03:00:30.540Z,1478919630.540 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 4.387700 seconds old.
2016-11-12T03:00:30.543Z,1478919630.543 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.388000 seconds old.
2016-11-12T03:00:30.545Z,1478919630.545 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 4.388100 seconds old.
2016-11-12T03:00:30.972Z,1478919630.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.823400 seconds old.
2016-11-12T03:00:30.974Z,1478919630.974 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.823700 seconds old.
2016-11-12T03:00:30.977Z,1478919630.977 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 4.824600 seconds old.
2016-11-12T03:00:30.980Z,1478919630.980 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.825100 seconds old.
2016-11-12T03:00:30.982Z,1478919630.982 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 4.825100 seconds old.
2016-11-12T03:00:31.349Z,1478919631.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.200400 seconds old.
2016-11-12T03:00:31.352Z,1478919631.352 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.200900 seconds old.
2016-11-12T03:00:31.354Z,1478919631.354 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 5.201200 seconds old.
2016-11-12T03:00:31.361Z,1478919631.361 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.205900 seconds old.
2016-11-12T03:00:31.367Z,1478919631.367 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 5.205900 seconds old.
2016-11-12T03:00:31.761Z,1478919631.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.612600 seconds old.
2016-11-12T03:00:31.776Z,1478919631.776 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.625000 seconds old.
2016-11-12T03:00:31.778Z,1478919631.778 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 5.625300 seconds old.
2016-11-12T03:00:31.792Z,1478919631.792 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.636900 seconds old.
2016-11-12T03:00:31.794Z,1478919631.794 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 5.637000 seconds old.
2016-11-12T03:00:32.142Z,1478919632.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.993400 seconds old.
2016-11-12T03:00:32.145Z,1478919632.145 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.994200 seconds old.
2016-11-12T03:00:32.147Z,1478919632.147 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 5.994600 seconds old.
2016-11-12T03:00:32.150Z,1478919632.150 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.995000 seconds old.
2016-11-12T03:00:32.153Z,1478919632.152 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 5.995200 seconds old.
2016-11-12T03:00:32.541Z,1478919632.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.393100 seconds old.
2016-11-12T03:00:32.544Z,1478919632.544 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.393600 seconds old.
2016-11-12T03:00:32.547Z,1478919632.547 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 6.393800 seconds old.
2016-11-12T03:00:32.549Z,1478919632.549 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.394400 seconds old.
2016-11-12T03:00:32.552Z,1478919632.552 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 6.394700 seconds old.
2016-11-12T03:00:32.945Z,1478919632.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.796800 seconds old.
2016-11-12T03:00:32.948Z,1478919632.948 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.797200 seconds old.
2016-11-12T03:00:32.950Z,1478919632.950 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 6.797400 seconds old.
2016-11-12T03:00:32.953Z,1478919632.953 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.798200 seconds old.
2016-11-12T03:00:32.956Z,1478919632.956 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 6.798500 seconds old.
2016-11-12T03:00:33.345Z,1478919633.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.197000 seconds old.
2016-11-12T03:00:33.364Z,1478919633.364 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.213500 seconds old.
2016-11-12T03:00:33.367Z,1478919633.367 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 7.213900 seconds old.
2016-11-12T03:00:33.373Z,1478919633.374 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.218800 seconds old.
2016-11-12T03:00:33.380Z,1478919633.380 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 7.223000 seconds old.
2016-11-12T03:00:33.743Z,1478919633.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.595200 seconds old.
2016-11-12T03:00:33.746Z,1478919633.746 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.595600 seconds old.
2016-11-12T03:00:33.749Z,1478919633.749 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 7.596000 seconds old.
2016-11-12T03:00:33.751Z,1478919633.751 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.596400 seconds old.
2016-11-12T03:00:33.754Z,1478919633.754 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 7.596700 seconds old.
2016-11-12T03:00:34.155Z,1478919634.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.007300 seconds old.
2016-11-12T03:00:34.158Z,1478919634.158 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.007700 seconds old.
2016-11-12T03:00:34.172Z,1478919634.172 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 8.018900 seconds old.
2016-11-12T03:00:34.174Z,1478919634.174 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.019300 seconds old.
2016-11-12T03:00:34.177Z,1478919634.177 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 8.019500 seconds old.
2016-11-12T03:00:34.552Z,1478919634.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.403300 seconds old.
2016-11-12T03:00:34.554Z,1478919634.554 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.403700 seconds old.
2016-11-12T03:00:34.557Z,1478919634.557 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 8.404300 seconds old.
2016-11-12T03:00:34.560Z,1478919634.560 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.404800 seconds old.
2016-11-12T03:00:34.562Z,1478919634.562 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 8.404900 seconds old.
2016-11-12T03:00:34.944Z,1478919634.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.795600 seconds old.
2016-11-12T03:00:34.947Z,1478919634.947 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.796000 seconds old.
2016-11-12T03:00:34.953Z,1478919634.953 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 8.800500 seconds old.
2016-11-12T03:00:34.960Z,1478919634.960 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.805200 seconds old.
2016-11-12T03:00:34.962Z,1478919634.963 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 8.805300 seconds old.
2016-11-12T03:00:38.285Z,1478919638.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 12.137100 seconds old.
2016-11-12T03:00:38.288Z,1478919638.288 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.137500 seconds old.
2016-11-12T03:00:38.291Z,1478919638.291 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 12.137800 seconds old.
2016-11-12T03:00:38.293Z,1478919638.293 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.138200 seconds old.
2016-11-12T03:00:38.296Z,1478919638.296 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 12.138300 seconds old.
2016-11-12T03:00:38.452Z,1478919638.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 12.304200 seconds old.
2016-11-12T03:00:38.456Z,1478919638.456 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.304900 seconds old.
2016-11-12T03:00:38.458Z,1478919638.458 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 12.305200 seconds old.
2016-11-12T03:00:38.461Z,1478919638.461 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.305900 seconds old.
2016-11-12T03:00:38.484Z,1478919638.484 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 12.326300 seconds old.
2016-11-12T03:00:48.421Z,1478919648.421 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T03:00:48.421Z,1478919648.421 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 52
2016-11-12T03:00:48.421Z,1478919648.421 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T03:00:48.435Z,1478919648.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T03:00:48.844Z,1478919648.844 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T03:00:48.844Z,1478919648.844 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 52
2016-11-12T03:00:49.233Z,1478919649.233 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T03:00:49.234Z,1478919649.234 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T03:00:49.234Z,1478919649.234 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T03:00:55.768Z,1478919655.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:00:56.564Z,1478919656.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:00:56.972Z,1478919656.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:00:57.768Z,1478919657.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:00:58.564Z,1478919658.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:00:59.036Z,1478919659.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:00:59.832Z,1478919659.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:00.628Z,1478919660.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:09.724Z,1478919669.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:10.521Z,1478919670.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:10.932Z,1478919670.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:11.728Z,1478919671.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:12.524Z,1478919672.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:13.016Z,1478919673.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:13.812Z,1478919673.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:14.608Z,1478919674.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:15.189Z,1478919675.189 [BPC1](ERROR): Failed to receive battery data
2016-11-12T03:01:15.189Z,1478919675.189 [BPC1] Communications Fault, FailCount= 1
2016-11-12T03:01:15.190Z,1478919675.190 [BPC1](ERROR): Communications Fault
2016-11-12T03:01:15.289Z,1478919675.289 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T03:01:15.372Z,1478919675.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:16.168Z,1478919676.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:16.458Z,1478919676.458 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T03:01:16.458Z,1478919676.458 [BPC1] No Fault, FailCount= 1
2016-11-12T03:01:16.964Z,1478919676.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:17.376Z,1478919677.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:18.172Z,1478919678.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:18.904Z,1478919678.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:19.700Z,1478919679.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:20.497Z,1478919680.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:20.908Z,1478919680.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:21.704Z,1478919681.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:22.500Z,1478919682.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:22.912Z,1478919682.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:23.709Z,1478919683.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:24.504Z,1478919684.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:24.916Z,1478919684.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:25.712Z,1478919685.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:26.508Z,1478919686.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:27.012Z,1478919687.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:27.808Z,1478919687.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:28.604Z,1478919688.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:29.348Z,1478919689.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:30.144Z,1478919690.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:30.941Z,1478919690.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:31.352Z,1478919691.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:32.148Z,1478919692.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:32.880Z,1478919692.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:33.238Z,1478919693.238 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T02:56:32.9Z
2016-11-12T03:01:33.238Z,1478919693.238 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T03:01:33.238Z,1478919693.239 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T03:01:33.676Z,1478919693.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:34.472Z,1478919694.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:34.912Z,1478919694.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:35.708Z,1478919695.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:36.504Z,1478919696.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:36.912Z,1478919696.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:37.708Z,1478919697.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:38.231Z,1478919698.231 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20161111T044527/Courier0516.lzma
2016-11-12T03:01:38.504Z,1478919698.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:38.912Z,1478919698.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:39.030Z,1478919699.030 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0516.lzma.bak
2016-11-12T03:01:39.030Z,1478919699.030 [DataOverHttps](INFO): SBD MOMSN=4556014
2016-11-12T03:01:39.708Z,1478919699.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:40.504Z,1478919700.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:40.980Z,1478919700.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:41.776Z,1478919701.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:42.572Z,1478919702.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:43.324Z,1478919703.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:44.120Z,1478919704.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:44.917Z,1478919704.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:45.328Z,1478919705.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:46.124Z,1478919706.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:46.844Z,1478919706.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:47.640Z,1478919707.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:48.438Z,1478919708.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:48.872Z,1478919708.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:49.059Z,1478919709.059 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-12T03:01:49.171Z,1478919709.171 [DataOverHttps](INFO): Sending 268 bytes from file Logs/20161111T044527/Express0517.lzma
2016-11-12T03:01:49.668Z,1478919709.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:49.975Z,1478919709.975 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0517.lzma.bak
2016-11-12T03:01:49.975Z,1478919709.975 [DataOverHttps](INFO): SBD MOMSN=4556017
2016-11-12T03:01:50.464Z,1478919710.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:50.872Z,1478919710.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:51.434Z,1478919711.434 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T03:01:51.434Z,1478919711.434 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T03:01:51.435Z,1478919711.434 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T03:01:51.668Z,1478919711.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:52.464Z,1478919712.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:52.872Z,1478919712.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:53.668Z,1478919713.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:54.464Z,1478919714.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:54.936Z,1478919714.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:55.014Z,1478919715.014 [NAL9602](INFO): Powering down
2016-11-12T03:01:55.734Z,1478919715.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:56.528Z,1478919716.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:57.296Z,1478919717.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:58.092Z,1478919718.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:58.888Z,1478919718.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:01:59.300Z,1478919719.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:00.096Z,1478919720.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:00.840Z,1478919720.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:01.636Z,1478919721.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:02.433Z,1478919722.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:02.844Z,1478919722.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:03.640Z,1478919723.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:04.436Z,1478919724.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:04.844Z,1478919724.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:05.640Z,1478919725.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:06.436Z,1478919726.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:06.844Z,1478919726.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:07.640Z,1478919727.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:08.436Z,1478919728.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:08.912Z,1478919728.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:09.708Z,1478919729.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:10.504Z,1478919730.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:11.280Z,1478919731.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:12.076Z,1478919732.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:12.872Z,1478919732.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:13.284Z,1478919733.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:23.684Z,1478919743.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:24.480Z,1478919744.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:25.268Z,1478919745.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:26.064Z,1478919746.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:26.860Z,1478919746.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:02:27.272Z,1478919747.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:03:05.628Z,1478919785.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:03:06.424Z,1478919786.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:03:49.606Z,1478919829.606 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T03:03:49.606Z,1478919829.606 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 53
2016-11-12T03:03:49.606Z,1478919829.606 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T03:03:49.620Z,1478919829.620 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T03:03:50.025Z,1478919830.025 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T03:03:50.025Z,1478919830.025 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 53
2016-11-12T03:03:50.449Z,1478919830.449 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T03:03:50.450Z,1478919830.450 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T03:03:50.450Z,1478919830.450 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T03:05:10.660Z,1478919910.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:05:11.456Z,1478919911.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:05:12.252Z,1478919912.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:05:12.988Z,1478919912.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:05:13.784Z,1478919913.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:05:14.581Z,1478919914.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:05:15.008Z,1478919915.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:05:53.364Z,1478919953.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:05:54.160Z,1478919954.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:03.252Z,1478919963.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:04.051Z,1478919964.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:04.468Z,1478919964.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:05.264Z,1478919965.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:06.060Z,1478919966.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:06.564Z,1478919966.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:07.360Z,1478919967.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:08.156Z,1478919968.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:08.908Z,1478919968.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:09.704Z,1478919969.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:10.501Z,1478919970.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:10.912Z,1478919970.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:11.708Z,1478919971.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:12.420Z,1478919972.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:13.216Z,1478919973.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:14.013Z,1478919974.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:14.424Z,1478919974.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:15.220Z,1478919975.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:16.017Z,1478919976.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:16.428Z,1478919976.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:17.224Z,1478919977.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:18.021Z,1478919978.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:18.432Z,1478919978.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:19.228Z,1478919979.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:20.024Z,1478919980.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:20.552Z,1478919980.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:21.348Z,1478919981.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:22.144Z,1478919982.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:22.880Z,1478919982.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:23.676Z,1478919983.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:24.486Z,1478919984.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:24.936Z,1478919984.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:25.732Z,1478919985.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:26.408Z,1478919986.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:27.204Z,1478919987.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:28.001Z,1478919988.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:28.412Z,1478919988.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:28.950Z,1478919988.950 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T03:06:29.208Z,1478919989.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:30.005Z,1478919990.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:30.420Z,1478919990.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:31.216Z,1478919991.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:32.015Z,1478919992.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:32.428Z,1478919992.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:33.224Z,1478919993.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:34.020Z,1478919994.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:34.536Z,1478919994.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:35.332Z,1478919995.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:36.128Z,1478919996.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:36.852Z,1478919996.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:37.648Z,1478919997.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:38.445Z,1478919998.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:38.856Z,1478919998.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:39.652Z,1478919999.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:40.380Z,1478920000.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:41.178Z,1478920001.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:41.973Z,1478920001.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:42.392Z,1478920002.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:43.188Z,1478920003.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:43.987Z,1478920003.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:44.404Z,1478920004.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:45.200Z,1478920005.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:45.997Z,1478920005.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:46.408Z,1478920006.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:47.205Z,1478920007.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:47.000Z,1478920008.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:48.472Z,1478920008.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:49.268Z,1478920009.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:50.066Z,1478920010.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:50.548Z,1478920010.548 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T03:06:50.548Z,1478920010.548 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 54
2016-11-12T03:06:50.548Z,1478920010.548 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T03:06:50.562Z,1478920010.562 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T03:06:50.836Z,1478920010.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:50.964Z,1478920010.964 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T03:06:50.964Z,1478920010.964 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 54
2016-11-12T03:06:51.357Z,1478920011.357 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T03:06:51.358Z,1478920011.358 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T03:06:51.358Z,1478920011.358 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T03:06:51.632Z,1478920011.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:51.743Z,1478920011.743 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T03:06:51.743Z,1478920011.743 [Default:CheckIn:C.Wait] Stopped
2016-11-12T03:06:51.743Z,1478920011.743 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T03:06:51.743Z,1478920011.743 [Default:CheckIn:D] Running Loop=1
2016-11-12T03:06:52.129Z,1478920012.129 [Default:CheckIn:D] Stopped
2016-11-12T03:06:52.129Z,1478920012.129 [Default:CheckIn:E] Running Loop=1
2016-11-12T03:06:52.429Z,1478920012.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:52.530Z,1478920012.530 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1336.847005 min 
2016-11-12T03:06:52.530Z,1478920012.530 [Default:CheckIn:E] Stopped
2016-11-12T03:06:52.530Z,1478920012.530 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T03:06:52.530Z,1478920012.530 [Default:CheckIn] Stopped
2016-11-12T03:06:52.530Z,1478920012.530 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T03:06:52.530Z,1478920012.530 [Default:CheckIn](INFO): Running loop #130
2016-11-12T03:06:52.530Z,1478920012.530 [Default:CheckIn] Running Loop=130
2016-11-12T03:06:52.530Z,1478920012.530 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T03:06:52.531Z,1478920012.531 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T03:06:52.840Z,1478920012.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:53.636Z,1478920013.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:54.364Z,1478920014.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:55.160Z,1478920015.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:55.957Z,1478920015.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:56.330Z,1478920016.330 [NAL9602](INFO): Powering up
2016-11-12T03:06:56.372Z,1478920016.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:57.168Z,1478920017.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:57.968Z,1478920017.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:58.380Z,1478920018.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:59.176Z,1478920019.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:06:59.973Z,1478920019.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:00.384Z,1478920020.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:01.180Z,1478920021.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:01.978Z,1478920021.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:02.456Z,1478920022.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:03.252Z,1478920023.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:04.048Z,1478920024.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:04.812Z,1478920024.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:05.608Z,1478920025.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:06.405Z,1478920026.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:06.816Z,1478920026.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:07.297Z,1478920027.297 [NAL9602](INFO): NAL9602 initialized
2016-11-12T03:07:07.612Z,1478920027.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:08.340Z,1478920028.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:09.136Z,1478920029.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:09.933Z,1478920029.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:10.352Z,1478920030.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:11.148Z,1478920031.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:11.945Z,1478920031.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:12.356Z,1478920032.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:13.152Z,1478920033.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:13.949Z,1478920033.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:14.360Z,1478920034.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:15.156Z,1478920035.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:15.952Z,1478920035.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:16.432Z,1478920036.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:17.228Z,1478920037.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:18.025Z,1478920038.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:18.792Z,1478920038.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:19.588Z,1478920039.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:20.385Z,1478920040.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:20.796Z,1478920040.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:21.592Z,1478920041.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:22.316Z,1478920042.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:23.112Z,1478920043.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:23.909Z,1478920043.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:24.320Z,1478920044.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:25.116Z,1478920045.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:25.913Z,1478920045.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:26.336Z,1478920046.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:27.132Z,1478920047.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:27.932Z,1478920047.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:28.340Z,1478920048.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:29.136Z,1478920049.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:29.935Z,1478920049.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:30.416Z,1478920050.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:31.212Z,1478920051.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:32.008Z,1478920052.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:32.768Z,1478920052.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:33.564Z,1478920053.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:34.376Z,1478920054.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:34.788Z,1478920054.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:35.584Z,1478920055.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:36.296Z,1478920056.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:37.092Z,1478920057.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:37.889Z,1478920057.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:38.304Z,1478920058.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:39.100Z,1478920059.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:39.293Z,1478920059.293 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-12T03:07:39.367Z,1478920059.367 [NAL9602](FAULT): received: 
+CSQ:0

OK2, 2, 0, 0, 0

OK
2016-11-12T03:07:39.367Z,1478920059.367 [NAL9602] Data Fault, FailCount= 1
2016-11-12T03:07:39.367Z,1478920059.367 [NAL9602](ERROR): Data Fault
2016-11-12T03:07:39.500Z,1478920059.500 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T03:07:39.692Z,1478920059.692 [NAL9602](INFO): Powering down
2016-11-12T03:07:39.897Z,1478920059.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:40.310Z,1478920060.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:40.557Z,1478920060.557 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T03:07:40.557Z,1478920060.557 [NAL9602] No Fault, FailCount= 1
2016-11-12T03:07:41.104Z,1478920061.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:41.911Z,1478920061.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:42.330Z,1478920062.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:43.125Z,1478920063.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:43.920Z,1478920063.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:44.408Z,1478920064.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:44.897Z,1478920064.897 [NAL9602](INFO): Powering up NAL9602
2016-11-12T03:07:45.204Z,1478920065.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:45.000Z,1478920066.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:46.748Z,1478920066.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:47.544Z,1478920067.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:48.341Z,1478920068.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:48.752Z,1478920068.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:49.548Z,1478920069.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:50.264Z,1478920070.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:51.061Z,1478920071.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:51.857Z,1478920071.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:52.268Z,1478920072.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:53.064Z,1478920073.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:53.861Z,1478920073.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:54.273Z,1478920074.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:55.068Z,1478920075.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:55.865Z,1478920075.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:56.284Z,1478920076.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:56.921Z,1478920076.921 [NAL9602](INFO): NAL9602 initialized
2016-11-12T03:07:57.080Z,1478920077.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:57.876Z,1478920077.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:58.364Z,1478920078.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:59.160Z,1478920079.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:07:59.956Z,1478920079.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:00.712Z,1478920080.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:01.508Z,1478920081.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:02.305Z,1478920082.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:02.716Z,1478920082.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:03.512Z,1478920083.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:04.244Z,1478920084.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:05.040Z,1478920085.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:05.836Z,1478920085.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:06.264Z,1478920086.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:07.060Z,1478920087.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:07.857Z,1478920087.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:08.268Z,1478920088.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:09.064Z,1478920089.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:09.860Z,1478920089.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:10.268Z,1478920090.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:11.064Z,1478920091.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:11.860Z,1478920091.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:12.344Z,1478920092.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:13.140Z,1478920093.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:13.936Z,1478920093.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:14.696Z,1478920094.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:15.492Z,1478920095.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:16.289Z,1478920096.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:16.708Z,1478920096.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:17.504Z,1478920097.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:18.232Z,1478920098.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:19.052Z,1478920099.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:19.848Z,1478920099.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:20.256Z,1478920100.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:21.052Z,1478920101.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:21.848Z,1478920101.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:22.256Z,1478920102.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:23.052Z,1478920103.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:23.848Z,1478920103.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:24.256Z,1478920104.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:25.052Z,1478920105.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:25.848Z,1478920105.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:26.316Z,1478920106.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:27.112Z,1478920107.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:27.908Z,1478920107.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:28.676Z,1478920108.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:29.472Z,1478920109.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:30.269Z,1478920110.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:30.552Z,1478920110.552 [PNI_TCM](ERROR): CRC does not match. Expected:0x30862 got:0x48945
2016-11-12T03:08:30.680Z,1478920110.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:30.962Z,1478920110.962 [PNI_TCM](ERROR): CRC does not match. Expected:0x2278 got:0x25579
2016-11-12T03:08:31.476Z,1478920111.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:32.216Z,1478920112.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:33.012Z,1478920113.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:33.809Z,1478920113.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:34.220Z,1478920114.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:35.016Z,1478920115.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:35.354Z,1478920115.354 [PNI_TCM](ERROR): CRC does not match. Expected:0x4904 got:0x16877
2016-11-12T03:08:35.813Z,1478920115.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:36.224Z,1478920116.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:36.947Z,1478920116.947 [PNI_TCM](ERROR): CRC does not match. Expected:0x18875 got:0x6591
2016-11-12T03:08:37.020Z,1478920117.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:37.816Z,1478920117.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:38.228Z,1478920118.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:39.024Z,1478920119.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:39.820Z,1478920119.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:40.292Z,1478920120.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:41.088Z,1478920121.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:41.884Z,1478920121.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:42.652Z,1478920122.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:43.448Z,1478920123.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:44.244Z,1478920124.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:44.656Z,1478920124.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:45.452Z,1478920125.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:46.216Z,1478920126.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:47.012Z,1478920127.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:47.808Z,1478920127.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:48.216Z,1478920128.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:49.012Z,1478920129.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:49.808Z,1478920129.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:50.216Z,1478920130.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:51.012Z,1478920131.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:51.808Z,1478920131.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:52.216Z,1478920132.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:53.012Z,1478920133.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:53.809Z,1478920133.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:54.280Z,1478920134.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:55.076Z,1478920135.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:55.872Z,1478920135.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:56.632Z,1478920136.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:57.428Z,1478920137.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:58.225Z,1478920138.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:58.636Z,1478920138.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:08:59.432Z,1478920139.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:00.176Z,1478920140.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:00.972Z,1478920140.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:01.768Z,1478920141.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:02.180Z,1478920142.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:02.976Z,1478920142.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:03.772Z,1478920143.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:04.184Z,1478920144.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:04.980Z,1478920144.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:05.776Z,1478920145.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:06.184Z,1478920146.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:06.980Z,1478920146.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:07.776Z,1478920147.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:08.256Z,1478920148.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:09.052Z,1478920149.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:09.848Z,1478920149.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:10.624Z,1478920150.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:11.281Z,1478920151.281 [PNI_TCM](ERROR): CRC does not match. Expected:0x44018 got:0x1857
2016-11-12T03:09:11.421Z,1478920151.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:12.217Z,1478920152.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:12.644Z,1478920152.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:13.440Z,1478920153.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:14.152Z,1478920154.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:14.948Z,1478920154.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:15.744Z,1478920155.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:16.156Z,1478920156.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:16.952Z,1478920156.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:17.748Z,1478920157.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:18.160Z,1478920158.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:18.956Z,1478920158.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:19.753Z,1478920159.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:20.160Z,1478920160.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:20.956Z,1478920160.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:21.752Z,1478920161.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:22.228Z,1478920162.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:23.024Z,1478920163.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:23.820Z,1478920163.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:24.588Z,1478920164.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:25.384Z,1478920165.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:26.181Z,1478920166.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:26.592Z,1478920166.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:27.388Z,1478920167.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:28.184Z,1478920168.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:28.980Z,1478920168.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:29.776Z,1478920169.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:30.184Z,1478920170.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:30.980Z,1478920170.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:31.776Z,1478920171.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:32.184Z,1478920172.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:32.980Z,1478920172.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:33.776Z,1478920173.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:34.184Z,1478920174.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:34.980Z,1478920174.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:35.782Z,1478920175.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:36.236Z,1478920176.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:37.032Z,1478920177.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:37.828Z,1478920177.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:38.568Z,1478920178.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:39.364Z,1478920179.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:40.169Z,1478920180.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:40.580Z,1478920180.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:41.376Z,1478920181.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:42.128Z,1478920182.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:42.924Z,1478920182.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:43.720Z,1478920183.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:44.144Z,1478920184.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:44.940Z,1478920184.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:45.736Z,1478920185.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:46.144Z,1478920186.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:46.940Z,1478920186.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:47.744Z,1478920187.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:48.152Z,1478920188.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:48.948Z,1478920188.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:49.744Z,1478920189.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:50.188Z,1478920190.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:50.985Z,1478920190.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:51.694Z,1478920191.694 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T03:09:51.695Z,1478920191.694 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 55
2016-11-12T03:09:51.695Z,1478920191.695 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T03:09:51.709Z,1478920191.709 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T03:09:51.780Z,1478920191.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:52.179Z,1478920192.179 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T03:09:52.179Z,1478920192.179 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 55
2016-11-12T03:09:52.516Z,1478920192.516 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T03:09:52.516Z,1478920192.516 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T03:09:52.516Z,1478920192.516 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T03:09:52.564Z,1478920192.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:53.360Z,1478920193.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:54.156Z,1478920194.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:54.568Z,1478920194.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:55.364Z,1478920195.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:56.080Z,1478920196.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:56.876Z,1478920196.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:57.672Z,1478920197.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:58.108Z,1478920198.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:58.904Z,1478920198.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:09:59.700Z,1478920199.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:00.108Z,1478920200.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:00.904Z,1478920200.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:01.700Z,1478920201.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:02.108Z,1478920202.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:02.904Z,1478920202.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:03.700Z,1478920203.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:04.168Z,1478920204.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:04.964Z,1478920204.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:05.760Z,1478920205.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:06.540Z,1478920206.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:07.336Z,1478920207.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:08.132Z,1478920208.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:08.544Z,1478920208.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:09.340Z,1478920209.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:10.084Z,1478920210.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:10.880Z,1478920210.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:11.676Z,1478920211.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:12.084Z,1478920212.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:12.880Z,1478920212.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:13.676Z,1478920213.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:14.088Z,1478920214.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:14.884Z,1478920214.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:15.680Z,1478920215.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:16.088Z,1478920216.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:16.884Z,1478920216.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:17.680Z,1478920217.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:18.156Z,1478920218.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:18.953Z,1478920218.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:19.748Z,1478920219.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:20.516Z,1478920220.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:21.312Z,1478920221.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:22.108Z,1478920222.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:22.520Z,1478920222.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:23.316Z,1478920223.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:24.044Z,1478920224.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:24.840Z,1478920224.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:25.637Z,1478920225.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:26.080Z,1478920226.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:26.876Z,1478920226.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:27.673Z,1478920227.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:28.084Z,1478920228.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:28.880Z,1478920228.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:29.676Z,1478920229.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:30.084Z,1478920230.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:30.880Z,1478920230.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:31.676Z,1478920231.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:32.120Z,1478920232.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:32.916Z,1478920232.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:33.712Z,1478920233.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:34.496Z,1478920234.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:35.292Z,1478920235.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:36.089Z,1478920236.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:36.500Z,1478920236.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:37.296Z,1478920237.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:38.024Z,1478920238.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:38.820Z,1478920238.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:39.616Z,1478920239.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:40.028Z,1478920240.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:40.824Z,1478920240.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:41.621Z,1478920241.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:42.032Z,1478920242.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:42.830Z,1478920242.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:43.626Z,1478920243.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:44.036Z,1478920244.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:44.832Z,1478920244.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:45.628Z,1478920245.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:46.108Z,1478920246.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:46.904Z,1478920246.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:47.700Z,1478920247.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:48.500Z,1478920248.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:49.296Z,1478920249.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:50.092Z,1478920250.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:50.500Z,1478920250.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:51.296Z,1478920251.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:51.988Z,1478920251.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:52.784Z,1478920252.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:53.581Z,1478920253.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:53.996Z,1478920253.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:54.793Z,1478920254.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:55.589Z,1478920255.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:56.004Z,1478920256.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:56.800Z,1478920256.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:57.516Z,1478920257.516 [BPC1](ERROR): Failed to receive battery data
2016-11-12T03:10:57.516Z,1478920257.516 [BPC1] Communications Fault, FailCount= 1
2016-11-12T03:10:57.516Z,1478920257.516 [BPC1](ERROR): Communications Fault
2016-11-12T03:10:57.596Z,1478920257.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:57.604Z,1478920257.604 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T03:10:58.024Z,1478920258.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:58.768Z,1478920258.768 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T03:10:58.768Z,1478920258.768 [BPC1] No Fault, FailCount= 1
2016-11-12T03:10:58.821Z,1478920258.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:10:59.616Z,1478920259.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:00.084Z,1478920260.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:00.880Z,1478920260.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:01.676Z,1478920261.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:02.444Z,1478920262.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:03.240Z,1478920263.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:04.037Z,1478920264.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:04.452Z,1478920264.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:05.248Z,1478920265.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:05.996Z,1478920265.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:06.792Z,1478920266.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:07.589Z,1478920267.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:07.996Z,1478920267.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:08.792Z,1478920268.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:09.588Z,1478920269.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:09.996Z,1478920269.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:10.305Z,1478920270.305 [PNI_TCM](ERROR): CRC does not match. Expected:0x36436 got:0x16962
2016-11-12T03:11:10.792Z,1478920270.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:11.588Z,1478920271.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:11.996Z,1478920271.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:12.792Z,1478920272.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:13.588Z,1478920273.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:14.060Z,1478920274.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:14.856Z,1478920274.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:15.652Z,1478920275.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:16.424Z,1478920276.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:17.220Z,1478920277.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:18.017Z,1478920278.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:18.428Z,1478920278.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:19.224Z,1478920279.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:19.952Z,1478920279.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:20.748Z,1478920280.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:21.545Z,1478920281.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:21.957Z,1478920281.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:22.752Z,1478920282.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:23.550Z,1478920283.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:23.976Z,1478920283.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:24.772Z,1478920284.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:25.569Z,1478920285.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:25.976Z,1478920285.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:26.772Z,1478920286.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:27.568Z,1478920287.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:28.044Z,1478920288.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:28.840Z,1478920288.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:29.636Z,1478920289.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:30.404Z,1478920290.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:31.200Z,1478920291.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:31.996Z,1478920291.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:32.420Z,1478920292.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:33.216Z,1478920293.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:33.956Z,1478920293.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:34.752Z,1478920294.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:35.548Z,1478920295.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:35.956Z,1478920295.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:36.752Z,1478920296.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:37.548Z,1478920297.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:37.956Z,1478920297.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:38.752Z,1478920298.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:39.548Z,1478920299.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:39.960Z,1478920299.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:40.756Z,1478920300.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:41.552Z,1478920301.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:42.016Z,1478920302.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:42.812Z,1478920302.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:43.608Z,1478920303.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:44.392Z,1478920304.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:45.188Z,1478920305.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:45.984Z,1478920305.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:46.404Z,1478920306.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:47.200Z,1478920307.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:47.956Z,1478920307.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:48.752Z,1478920308.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:49.548Z,1478920309.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:49.956Z,1478920309.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:50.752Z,1478920310.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:51.548Z,1478920311.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:51.956Z,1478920311.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:52.730Z,1478920312.730 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T03:06:52.5Z
2016-11-12T03:11:52.730Z,1478920312.730 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T03:11:52.730Z,1478920312.730 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T03:11:52.752Z,1478920312.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:53.548Z,1478920313.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:53.956Z,1478920313.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:54.752Z,1478920314.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:55.548Z,1478920315.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:56.008Z,1478920316.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:56.804Z,1478920316.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:57.600Z,1478920317.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:57.659Z,1478920317.659 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0520.lzma
2016-11-12T03:11:58.396Z,1478920318.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:58.454Z,1478920318.454 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0520.lzma.bak
2016-11-12T03:11:58.454Z,1478920318.454 [DataOverHttps](INFO): SBD MOMSN=4556023
2016-11-12T03:11:58.804Z,1478920318.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:11:59.600Z,1478920319.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:00.356Z,1478920320.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:01.152Z,1478920321.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:01.892Z,1478920321.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:02.688Z,1478920322.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:03.485Z,1478920323.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:03.904Z,1478920323.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:04.700Z,1478920324.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:05.496Z,1478920325.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:05.904Z,1478920325.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:06.700Z,1478920326.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:07.496Z,1478920327.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:07.904Z,1478920327.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:08.531Z,1478920328.531 [DataOverHttps](INFO): Sending 250 bytes from file Logs/20161111T044527/Express0521.lzma
2016-11-12T03:12:08.700Z,1478920328.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:09.496Z,1478920329.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:10.153Z,1478920330.153 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0521.lzma.bak
2016-11-12T03:12:10.154Z,1478920330.154 [DataOverHttps](INFO): SBD MOMSN=4556025
2016-11-12T03:12:10.292Z,1478920330.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:10.700Z,1478920330.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:11.244Z,1478920331.244 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-12T03:12:11.308Z,1478920331.307 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T03:12:11.308Z,1478920331.308 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T03:12:11.308Z,1478920331.308 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T03:12:11.496Z,1478920331.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:12.292Z,1478920332.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:12.700Z,1478920332.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:13.496Z,1478920333.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:14.292Z,1478920334.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:14.700Z,1478920334.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:15.496Z,1478920335.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:15.904Z,1478920335.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:16.181Z,1478920336.181 [PNI_TCM](ERROR): CRC does not match. Expected:0x39051 got:0x7175
2016-11-12T03:12:16.561Z,1478920336.561 [NAL9602](INFO): Powering down
2016-11-12T03:12:16.700Z,1478920336.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:17.496Z,1478920337.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:17.904Z,1478920337.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:18.700Z,1478920338.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:19.390Z,1478920339.390 [PNI_TCM](ERROR): CRC does not match. Expected:0x55111 got:0x60864
2016-11-12T03:12:19.496Z,1478920339.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:19.904Z,1478920339.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:20.700Z,1478920340.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:21.496Z,1478920341.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:21.904Z,1478920341.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:22.700Z,1478920342.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:23.497Z,1478920343.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:23.940Z,1478920343.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:24.736Z,1478920344.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:25.532Z,1478920345.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:26.300Z,1478920346.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:27.096Z,1478920347.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:27.893Z,1478920347.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:28.316Z,1478920348.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:29.112Z,1478920349.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:29.836Z,1478920349.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:30.632Z,1478920350.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:31.429Z,1478920351.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:31.840Z,1478920351.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:32.189Z,1478920352.189 [BPC1](ERROR): Failed to receive battery data
2016-11-12T03:12:32.189Z,1478920352.189 [BPC1] Communications Fault, FailCount= 1
2016-11-12T03:12:32.189Z,1478920352.189 [BPC1](ERROR): Communications Fault
2016-11-12T03:12:32.221Z,1478920352.221 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T03:12:32.636Z,1478920352.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:33.432Z,1478920353.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:33.521Z,1478920353.521 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T03:12:33.521Z,1478920353.521 [BPC1] No Fault, FailCount= 1
2016-11-12T03:12:33.840Z,1478920353.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:34.636Z,1478920354.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:35.432Z,1478920355.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:35.840Z,1478920355.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:36.636Z,1478920356.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:37.432Z,1478920357.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:37.908Z,1478920357.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:38.704Z,1478920358.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:39.500Z,1478920359.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:40.272Z,1478920360.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:41.068Z,1478920361.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:41.865Z,1478920361.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:42.276Z,1478920362.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:43.072Z,1478920363.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:43.816Z,1478920363.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:44.612Z,1478920364.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:45.408Z,1478920365.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:45.820Z,1478920365.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:46.616Z,1478920366.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:47.412Z,1478920367.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:47.820Z,1478920367.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:48.616Z,1478920368.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:49.412Z,1478920369.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:49.424Z,1478920369.424 [BPC1](ERROR): Failed to receive battery data
2016-11-12T03:12:49.424Z,1478920369.424 [BPC1] Communications Fault, FailCount= 2
2016-11-12T03:12:49.424Z,1478920369.424 [BPC1](ERROR): Communications Fault
2016-11-12T03:12:49.515Z,1478920369.515 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T03:12:49.824Z,1478920369.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:50.620Z,1478920370.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:50.627Z,1478920370.626 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T03:12:50.627Z,1478920370.627 [BPC1] No Fault, FailCount= 2
2016-11-12T03:12:51.416Z,1478920371.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:51.892Z,1478920371.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:52.603Z,1478920372.603 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T03:12:52.603Z,1478920372.603 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 56
2016-11-12T03:12:52.603Z,1478920372.603 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T03:12:52.654Z,1478920372.654 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T03:12:52.688Z,1478920372.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:53.053Z,1478920373.053 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T03:12:53.053Z,1478920373.053 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 56
2016-11-12T03:12:53.406Z,1478920373.406 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T03:12:53.406Z,1478920373.406 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T03:12:53.406Z,1478920373.406 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T03:12:53.484Z,1478920373.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:54.256Z,1478920374.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:55.052Z,1478920375.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:55.848Z,1478920375.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:56.260Z,1478920376.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:57.056Z,1478920377.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:57.780Z,1478920377.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:58.576Z,1478920378.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:59.373Z,1478920379.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:12:59.784Z,1478920379.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:00.587Z,1478920380.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:01.384Z,1478920381.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:01.800Z,1478920381.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:02.596Z,1478920382.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:03.392Z,1478920383.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:03.864Z,1478920383.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:04.668Z,1478920384.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:05.465Z,1478920385.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:05.876Z,1478920385.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:06.673Z,1478920386.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:07.468Z,1478920387.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:08.228Z,1478920388.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:09.024Z,1478920389.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:09.821Z,1478920389.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:10.232Z,1478920390.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:11.028Z,1478920391.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:11.744Z,1478920391.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:12.540Z,1478920392.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:13.337Z,1478920393.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:13.748Z,1478920393.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:14.544Z,1478920394.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:15.341Z,1478920395.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:15.760Z,1478920395.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:16.556Z,1478920396.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:17.352Z,1478920397.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:17.764Z,1478920397.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:18.560Z,1478920398.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:19.356Z,1478920399.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:19.864Z,1478920399.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:20.660Z,1478920400.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:21.456Z,1478920401.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:22.196Z,1478920402.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:22.992Z,1478920402.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:23.789Z,1478920403.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:24.200Z,1478920404.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:24.996Z,1478920404.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:25.736Z,1478920405.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:26.532Z,1478920406.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:27.329Z,1478920407.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:27.740Z,1478920407.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:28.536Z,1478920408.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:29.333Z,1478920409.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:29.744Z,1478920409.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:30.540Z,1478920410.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:31.336Z,1478920411.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:31.748Z,1478920411.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:32.544Z,1478920412.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:33.340Z,1478920413.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:33.824Z,1478920413.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:34.437Z,1478920414.437 [BPC1](ERROR): Failed to receive battery data
2016-11-12T03:13:34.437Z,1478920414.437 [BPC1] Communications Fault, FailCount= 1
2016-11-12T03:13:34.437Z,1478920414.437 [BPC1](ERROR): Communications Fault
2016-11-12T03:13:34.511Z,1478920414.511 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T03:13:34.620Z,1478920414.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:35.416Z,1478920415.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:35.705Z,1478920415.705 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T03:13:35.705Z,1478920415.705 [BPC1] No Fault, FailCount= 1
2016-11-12T03:13:36.188Z,1478920416.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:36.984Z,1478920416.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:37.782Z,1478920417.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:38.196Z,1478920418.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:38.992Z,1478920418.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:39.708Z,1478920419.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:40.504Z,1478920420.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:41.300Z,1478920421.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:41.712Z,1478920421.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:42.508Z,1478920422.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:43.305Z,1478920423.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:43.716Z,1478920423.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:44.512Z,1478920424.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:45.246Z,1478920425.246 [PNI_TCM](ERROR): CRC does not match. Expected:0x29824 got:0x6335
2016-11-12T03:13:45.308Z,1478920425.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:45.720Z,1478920425.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:46.532Z,1478920426.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:47.328Z,1478920427.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:47.796Z,1478920427.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:48.448Z,1478920428.448 [PNI_TCM](ERROR): CRC does not match. Expected:0x22803 got:0x16962
2016-11-12T03:13:48.592Z,1478920428.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:49.390Z,1478920429.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:50.156Z,1478920430.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:50.952Z,1478920430.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:51.749Z,1478920431.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:52.160Z,1478920432.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:52.956Z,1478920432.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:53.238Z,1478920433.238 [PNI_TCM](ERROR): CRC does not match. Expected:0x48605 got:0x51227
2016-11-12T03:13:53.700Z,1478920433.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:54.496Z,1478920434.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:54.848Z,1478920434.848 [PNI_TCM](ERROR): CRC does not match. Expected:0x47992 got:0x33821
2016-11-12T03:13:55.293Z,1478920435.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:55.704Z,1478920435.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:56.500Z,1478920436.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:57.297Z,1478920437.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:57.708Z,1478920437.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:58.504Z,1478920438.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:59.300Z,1478920439.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:13:59.708Z,1478920439.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:00.504Z,1478920440.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:01.300Z,1478920441.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:01.776Z,1478920441.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:02.572Z,1478920442.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:03.368Z,1478920443.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:04.136Z,1478920444.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:04.932Z,1478920444.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:05.728Z,1478920445.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:06.140Z,1478920446.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:06.936Z,1478920446.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:07.692Z,1478920447.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:08.488Z,1478920448.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:09.284Z,1478920449.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:09.692Z,1478920449.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:10.488Z,1478920450.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:11.284Z,1478920451.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:11.692Z,1478920451.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:12.488Z,1478920452.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:13.284Z,1478920453.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:13.692Z,1478920453.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:14.488Z,1478920454.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:15.284Z,1478920455.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:15.756Z,1478920455.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:16.552Z,1478920456.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:17.348Z,1478920457.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:18.132Z,1478920458.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:18.928Z,1478920458.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:19.724Z,1478920459.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:20.136Z,1478920460.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:20.932Z,1478920460.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:21.656Z,1478920461.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:22.452Z,1478920462.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:23.249Z,1478920463.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:23.660Z,1478920463.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:24.456Z,1478920464.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:25.253Z,1478920465.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:25.664Z,1478920465.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:26.460Z,1478920466.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:27.257Z,1478920467.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:27.664Z,1478920467.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:28.460Z,1478920468.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:29.256Z,1478920469.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:29.740Z,1478920469.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:30.536Z,1478920470.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:31.332Z,1478920471.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:32.096Z,1478920472.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:32.892Z,1478920472.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:33.688Z,1478920473.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:34.120Z,1478920474.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:34.916Z,1478920474.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:35.641Z,1478920475.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:36.444Z,1478920476.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:37.241Z,1478920477.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:37.652Z,1478920477.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:38.448Z,1478920478.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:39.245Z,1478920479.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:39.656Z,1478920479.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:40.452Z,1478920480.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:41.248Z,1478920481.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:41.656Z,1478920481.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:42.452Z,1478920482.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:43.249Z,1478920483.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:43.720Z,1478920483.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:44.516Z,1478920484.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:45.312Z,1478920485.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:46.092Z,1478920486.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:46.888Z,1478920486.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:47.684Z,1478920487.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:48.096Z,1478920488.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:48.892Z,1478920488.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:49.605Z,1478920489.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:50.400Z,1478920490.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:51.196Z,1478920491.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:51.608Z,1478920491.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:52.404Z,1478920492.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:53.201Z,1478920493.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:53.612Z,1478920493.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:54.408Z,1478920494.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:55.204Z,1478920495.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:55.636Z,1478920495.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:56.432Z,1478920496.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:57.228Z,1478920497.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:57.712Z,1478920497.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:58.508Z,1478920498.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:14:59.304Z,1478920499.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:00.056Z,1478920500.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:00.852Z,1478920500.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:01.648Z,1478920501.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:02.068Z,1478920502.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:02.864Z,1478920502.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:03.580Z,1478920503.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:04.376Z,1478920504.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:05.180Z,1478920505.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:05.600Z,1478920505.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:06.396Z,1478920506.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:07.192Z,1478920507.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:07.612Z,1478920507.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:08.408Z,1478920508.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:09.205Z,1478920509.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:09.612Z,1478920509.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:10.408Z,1478920510.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:11.204Z,1478920511.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:11.696Z,1478920511.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:12.492Z,1478920512.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:13.288Z,1478920513.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:14.028Z,1478920514.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:14.825Z,1478920514.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:15.621Z,1478920515.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:16.037Z,1478920516.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:16.832Z,1478920516.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:17.556Z,1478920517.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:18.354Z,1478920518.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:19.149Z,1478920519.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:19.568Z,1478920519.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:20.364Z,1478920520.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:21.161Z,1478920521.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:21.580Z,1478920521.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:22.376Z,1478920522.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:23.172Z,1478920523.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:23.580Z,1478920523.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:24.376Z,1478920524.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:25.172Z,1478920525.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:25.672Z,1478920525.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:26.468Z,1478920526.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:27.264Z,1478920527.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:28.028Z,1478920528.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:28.824Z,1478920528.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:29.621Z,1478920529.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:30.040Z,1478920530.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:30.836Z,1478920530.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:31.536Z,1478920531.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:32.332Z,1478920532.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:33.132Z,1478920533.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:33.544Z,1478920533.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:34.340Z,1478920534.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:35.137Z,1478920535.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:35.548Z,1478920535.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:36.344Z,1478920536.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:37.141Z,1478920537.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:37.552Z,1478920537.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:38.348Z,1478920538.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:39.144Z,1478920539.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:39.672Z,1478920539.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:40.468Z,1478920540.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:41.264Z,1478920541.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:41.984Z,1478920541.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:42.780Z,1478920542.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:43.577Z,1478920543.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:43.992Z,1478920543.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:44.799Z,1478920544.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:45.516Z,1478920545.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:46.312Z,1478920546.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:47.109Z,1478920547.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:47.520Z,1478920547.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:48.316Z,1478920548.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:49.113Z,1478920549.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:49.528Z,1478920549.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:50.325Z,1478920550.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:51.133Z,1478920551.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:51.548Z,1478920551.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:52.344Z,1478920552.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:53.140Z,1478920553.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:53.650Z,1478920553.650 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T03:15:53.650Z,1478920553.650 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 57
2016-11-12T03:15:53.650Z,1478920553.650 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T03:15:53.656Z,1478920553.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:53.665Z,1478920553.665 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T03:15:54.103Z,1478920554.103 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T03:15:54.103Z,1478920554.103 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 57
2016-11-12T03:15:54.445Z,1478920554.445 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T03:15:54.446Z,1478920554.446 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T03:15:54.446Z,1478920554.446 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T03:15:54.452Z,1478920554.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:55.248Z,1478920555.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:55.964Z,1478920555.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:56.760Z,1478920556.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:57.557Z,1478920557.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:57.968Z,1478920557.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:58.764Z,1478920558.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:15:59.492Z,1478920559.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:00.288Z,1478920560.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:01.085Z,1478920561.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:01.496Z,1478920561.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:02.292Z,1478920562.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:03.100Z,1478920563.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:03.520Z,1478920563.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:04.316Z,1478920564.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:05.112Z,1478920565.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:05.520Z,1478920565.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:06.316Z,1478920566.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:07.112Z,1478920567.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:07.616Z,1478920567.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:08.412Z,1478920568.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:09.209Z,1478920569.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:09.948Z,1478920569.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:10.744Z,1478920570.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:11.541Z,1478920571.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:11.952Z,1478920571.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:12.748Z,1478920572.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:13.468Z,1478920573.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:14.264Z,1478920574.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:15.060Z,1478920575.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:15.472Z,1478920575.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:16.268Z,1478920576.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:17.065Z,1478920577.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:17.476Z,1478920577.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:18.272Z,1478920578.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:19.069Z,1478920579.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:19.480Z,1478920579.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:20.276Z,1478920580.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:21.074Z,1478920581.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:21.612Z,1478920581.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:22.408Z,1478920582.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:23.204Z,1478920583.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:23.920Z,1478920583.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:24.716Z,1478920584.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:25.514Z,1478920585.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:25.936Z,1478920585.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:26.732Z,1478920586.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:27.448Z,1478920587.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:28.244Z,1478920588.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:29.041Z,1478920589.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:29.269Z,1478920589.269 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-12T03:16:29.452Z,1478920589.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:30.248Z,1478920590.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:31.045Z,1478920591.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:31.460Z,1478920591.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:32.256Z,1478920592.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:33.053Z,1478920593.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:33.464Z,1478920593.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:34.261Z,1478920594.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:35.056Z,1478920595.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:35.544Z,1478920595.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:36.340Z,1478920596.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:37.136Z,1478920597.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:37.900Z,1478920597.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:38.696Z,1478920598.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:39.493Z,1478920599.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:39.904Z,1478920599.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:40.700Z,1478920600.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:41.428Z,1478920601.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:42.224Z,1478920602.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:43.021Z,1478920603.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:43.432Z,1478920603.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:44.228Z,1478920604.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:45.036Z,1478920605.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:45.452Z,1478920605.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:46.248Z,1478920606.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:47.045Z,1478920607.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:47.452Z,1478920607.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:48.248Z,1478920608.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:49.044Z,1478920609.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:49.524Z,1478920609.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:50.320Z,1478920610.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:51.116Z,1478920611.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:51.880Z,1478920611.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:52.676Z,1478920612.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:53.473Z,1478920613.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:53.884Z,1478920613.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:54.680Z,1478920614.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:55.404Z,1478920615.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:56.200Z,1478920616.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:56.997Z,1478920616.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:57.408Z,1478920617.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:58.204Z,1478920618.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:59.001Z,1478920619.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:16:59.412Z,1478920619.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:00.208Z,1478920620.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:01.005Z,1478920621.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:01.416Z,1478920621.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:02.212Z,1478920622.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:03.008Z,1478920623.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:03.508Z,1478920623.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:04.304Z,1478920624.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:05.100Z,1478920625.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:05.856Z,1478920625.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:06.652Z,1478920626.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:07.449Z,1478920627.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:07.864Z,1478920627.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:08.660Z,1478920628.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:09.384Z,1478920629.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:10.180Z,1478920630.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:10.988Z,1478920630.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:11.404Z,1478920631.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:11.669Z,1478920631.670 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-12T03:17:11.670Z,1478920631.670 [Default:CheckIn:C.Wait] Stopped
2016-11-12T03:17:11.670Z,1478920631.670 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-12T03:17:11.670Z,1478920631.670 [Default:CheckIn:D] Running Loop=1
2016-11-12T03:17:12.067Z,1478920632.067 [Default:CheckIn:D] Stopped
2016-11-12T03:17:12.067Z,1478920632.067 [Default:CheckIn:E] Running Loop=1
2016-11-12T03:17:12.200Z,1478920632.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:12.468Z,1478920632.468 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1347.179297 min 
2016-11-12T03:17:12.468Z,1478920632.468 [Default:CheckIn:E] Stopped
2016-11-12T03:17:12.468Z,1478920632.468 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-12T03:17:12.468Z,1478920632.468 [Default:CheckIn] Stopped
2016-11-12T03:17:12.468Z,1478920632.468 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-12T03:17:12.469Z,1478920632.469 [Default:CheckIn](INFO): Running loop #131
2016-11-12T03:17:12.469Z,1478920632.469 [Default:CheckIn] Running Loop=131
2016-11-12T03:17:12.469Z,1478920632.469 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-12T03:17:12.469Z,1478920632.469 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-12T03:17:12.996Z,1478920632.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:13.408Z,1478920633.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:14.204Z,1478920634.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:15.001Z,1478920635.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:15.412Z,1478920635.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:16.142Z,1478920636.142 [NAL9602](INFO): Powering up
2016-11-12T03:17:16.208Z,1478920636.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:17.004Z,1478920637.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:17.488Z,1478920637.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:18.284Z,1478920638.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:19.080Z,1478920639.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:19.828Z,1478920639.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:20.624Z,1478920640.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:21.421Z,1478920641.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:21.832Z,1478920641.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:22.628Z,1478920642.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:23.352Z,1478920643.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:24.148Z,1478920644.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:24.945Z,1478920644.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:25.356Z,1478920645.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:26.152Z,1478920646.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:26.949Z,1478920646.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:27.117Z,1478920647.117 [NAL9602](INFO): NAL9602 initialized
2016-11-12T03:17:27.372Z,1478920647.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:27.912Z,1478920647.912 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-12T03:17:27.912Z,1478920647.912 [NAL9602] Data Fault, FailCount= 2
2016-11-12T03:17:27.912Z,1478920647.912 [NAL9602](ERROR): Data Fault
2016-11-12T03:17:27.997Z,1478920647.997 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-12T03:17:28.168Z,1478920648.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:28.320Z,1478920648.320 [NAL9602](INFO): Powering down
2016-11-12T03:17:28.968Z,1478920648.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:29.203Z,1478920649.203 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-12T03:17:29.204Z,1478920649.204 [NAL9602] No Fault, FailCount= 2
2016-11-12T03:17:29.376Z,1478920649.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:30.172Z,1478920650.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:30.968Z,1478920650.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:31.464Z,1478920651.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:32.260Z,1478920652.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:33.056Z,1478920653.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:33.517Z,1478920653.517 [NAL9602](INFO): Powering up NAL9602
2016-11-12T03:17:33.812Z,1478920653.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:34.609Z,1478920654.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:35.405Z,1478920655.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:35.816Z,1478920655.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:36.612Z,1478920656.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:37.332Z,1478920657.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:38.128Z,1478920658.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:38.925Z,1478920658.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:39.336Z,1478920659.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:40.132Z,1478920660.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:40.931Z,1478920660.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:41.344Z,1478920661.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:42.140Z,1478920662.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:42.937Z,1478920662.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:43.348Z,1478920663.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:44.144Z,1478920664.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:44.709Z,1478920664.709 [NAL9602](INFO): NAL9602 initialized
2016-11-12T03:17:44.940Z,1478920664.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:45.737Z,1478920665.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:46.532Z,1478920666.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:47.328Z,1478920667.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:47.784Z,1478920667.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:48.580Z,1478920668.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:49.377Z,1478920669.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:49.788Z,1478920669.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:50.584Z,1478920670.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:51.312Z,1478920671.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:52.108Z,1478920672.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:52.905Z,1478920672.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:53.316Z,1478920673.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:54.112Z,1478920674.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:54.909Z,1478920674.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:55.324Z,1478920675.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:56.120Z,1478920676.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:56.927Z,1478920676.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:57.344Z,1478920677.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:58.140Z,1478920678.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:58.936Z,1478920678.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:17:59.412Z,1478920679.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:00.209Z,1478920680.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:01.004Z,1478920681.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:01.760Z,1478920681.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:02.556Z,1478920682.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:03.353Z,1478920683.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:03.764Z,1478920683.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:04.560Z,1478920684.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:05.288Z,1478920685.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:06.084Z,1478920686.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:06.881Z,1478920686.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:07.304Z,1478920687.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:08.100Z,1478920688.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:08.897Z,1478920688.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:09.308Z,1478920689.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:10.104Z,1478920690.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:10.901Z,1478920690.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:11.312Z,1478920691.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:12.108Z,1478920692.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:12.904Z,1478920692.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:13.412Z,1478920693.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:14.208Z,1478920694.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:15.004Z,1478920695.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:15.752Z,1478920695.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:16.548Z,1478920696.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:17.344Z,1478920697.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:17.756Z,1478920697.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:18.552Z,1478920698.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:19.272Z,1478920699.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:20.068Z,1478920700.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:20.865Z,1478920700.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:21.280Z,1478920701.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:22.076Z,1478920702.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:22.873Z,1478920702.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:23.296Z,1478920703.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:24.092Z,1478920704.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:24.889Z,1478920704.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:25.300Z,1478920705.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:26.096Z,1478920706.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:26.892Z,1478920706.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:27.400Z,1478920707.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:28.196Z,1478920708.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:28.992Z,1478920708.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:29.724Z,1478920709.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:29.773Z,1478920709.773 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T03:18:29.773Z,1478920709.773 [BPC1] Data Fault, FailCount= 1
2016-11-12T03:18:29.773Z,1478920709.773 [BPC1](ERROR): Data Fault
2016-11-12T03:18:29.851Z,1478920709.852 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T03:18:30.520Z,1478920710.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:31.027Z,1478920711.027 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T03:18:31.027Z,1478920711.027 [BPC1] No Fault, FailCount= 1
2016-11-12T03:18:31.317Z,1478920711.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:31.728Z,1478920711.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:32.524Z,1478920712.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:33.248Z,1478920713.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:34.044Z,1478920714.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:34.841Z,1478920714.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:35.252Z,1478920715.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:36.048Z,1478920716.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:36.846Z,1478920716.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:37.256Z,1478920717.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:38.052Z,1478920718.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:38.849Z,1478920718.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:39.260Z,1478920719.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:40.056Z,1478920720.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:40.852Z,1478920720.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:41.384Z,1478920721.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:42.180Z,1478920722.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:42.966Z,1478920722.966 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T03:18:42.966Z,1478920722.966 [BPC1] Data Fault, FailCount= 2
2016-11-12T03:18:42.966Z,1478920722.966 [BPC1](ERROR): Data Fault
2016-11-12T03:18:42.976Z,1478920722.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:43.022Z,1478920723.022 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T03:18:43.700Z,1478920723.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:44.219Z,1478920724.219 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T03:18:44.220Z,1478920724.220 [BPC1] No Fault, FailCount= 2
2016-11-12T03:18:44.496Z,1478920724.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:45.293Z,1478920725.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:45.704Z,1478920725.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:46.500Z,1478920726.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:47.224Z,1478920727.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:48.020Z,1478920728.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:48.817Z,1478920728.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:49.228Z,1478920729.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:50.024Z,1478920730.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:50.826Z,1478920730.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:51.252Z,1478920731.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:52.048Z,1478920732.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:52.844Z,1478920732.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:53.252Z,1478920733.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:54.048Z,1478920734.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:54.622Z,1478920734.622 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T03:18:54.622Z,1478920734.622 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 58
2016-11-12T03:18:54.622Z,1478920734.622 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T03:18:54.644Z,1478920734.644 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T03:18:54.844Z,1478920734.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:55.059Z,1478920735.059 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T03:18:55.059Z,1478920735.059 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 58
2016-11-12T03:18:55.340Z,1478920735.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:55.406Z,1478920735.406 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T03:18:55.406Z,1478920735.406 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T03:18:55.407Z,1478920735.407 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T03:18:56.136Z,1478920736.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:56.940Z,1478920736.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:57.688Z,1478920737.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:58.484Z,1478920738.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:59.281Z,1478920739.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:18:59.692Z,1478920739.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:00.489Z,1478920740.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:01.204Z,1478920741.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:01.000Z,1478920742.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:02.797Z,1478920742.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:03.212Z,1478920743.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:04.008Z,1478920744.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:04.808Z,1478920744.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:05.224Z,1478920745.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:06.020Z,1478920746.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:06.819Z,1478920746.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:07.228Z,1478920747.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:08.024Z,1478920748.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:08.822Z,1478920748.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:09.296Z,1478920749.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:10.092Z,1478920750.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:10.888Z,1478920750.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:11.656Z,1478920751.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:12.452Z,1478920752.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:13.249Z,1478920753.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:13.660Z,1478920753.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:14.456Z,1478920754.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:15.188Z,1478920755.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:15.984Z,1478920755.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:16.782Z,1478920756.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:17.196Z,1478920757.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:17.993Z,1478920757.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:18.789Z,1478920758.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:19.204Z,1478920759.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:19.000Z,1478920760.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:20.797Z,1478920760.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:21.208Z,1478920761.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:22.004Z,1478920762.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:22.800Z,1478920762.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:23.324Z,1478920763.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:24.120Z,1478920764.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:24.916Z,1478920764.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:25.636Z,1478920765.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:26.432Z,1478920766.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:27.229Z,1478920767.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:27.640Z,1478920767.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:28.436Z,1478920768.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:29.164Z,1478920769.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:29.962Z,1478920769.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:30.757Z,1478920770.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:31.168Z,1478920771.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:31.964Z,1478920771.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:32.761Z,1478920772.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:33.180Z,1478920773.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:33.978Z,1478920773.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:34.773Z,1478920774.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:35.188Z,1478920775.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:35.984Z,1478920775.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:36.780Z,1478920776.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:37.268Z,1478920777.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:38.064Z,1478920778.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:38.860Z,1478920778.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:39.620Z,1478920779.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:40.416Z,1478920780.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:41.213Z,1478920781.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:41.624Z,1478920781.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:42.420Z,1478920782.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:42.921Z,1478920782.921 [BPC1](ERROR): Failed to receive battery data
2016-11-12T03:19:42.922Z,1478920782.921 [BPC1] Communications Fault, FailCount= 1
2016-11-12T03:19:42.922Z,1478920782.922 [BPC1](ERROR): Communications Fault
2016-11-12T03:19:42.986Z,1478920782.986 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T03:19:43.148Z,1478920783.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:43.944Z,1478920783.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:44.168Z,1478920784.168 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T03:19:44.169Z,1478920784.168 [BPC1] No Fault, FailCount= 1
2016-11-12T03:19:44.741Z,1478920784.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:45.152Z,1478920785.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:45.948Z,1478920785.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:46.745Z,1478920786.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:47.156Z,1478920787.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:47.952Z,1478920787.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:48.749Z,1478920788.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:49.160Z,1478920789.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:49.956Z,1478920789.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:50.752Z,1478920790.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:51.264Z,1478920791.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:52.060Z,1478920792.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:52.856Z,1478920792.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:53.592Z,1478920793.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:54.388Z,1478920794.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:55.185Z,1478920795.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:55.596Z,1478920795.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:56.392Z,1478920796.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:57.120Z,1478920797.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:57.916Z,1478920797.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:58.713Z,1478920798.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:59.124Z,1478920799.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:19:59.920Z,1478920799.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:00.736Z,1478920800.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:01.156Z,1478920801.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:01.952Z,1478920801.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:02.748Z,1478920802.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:03.156Z,1478920803.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:03.952Z,1478920803.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:04.748Z,1478920804.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:05.216Z,1478920805.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:06.012Z,1478920806.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:06.808Z,1478920806.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:07.572Z,1478920807.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:08.368Z,1478920808.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:09.165Z,1478920809.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:09.576Z,1478920809.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:10.372Z,1478920810.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:11.100Z,1478920811.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:11.896Z,1478920811.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:12.693Z,1478920812.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:13.108Z,1478920813.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:13.904Z,1478920813.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:14.701Z,1478920814.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:15.112Z,1478920815.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:15.908Z,1478920815.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:16.705Z,1478920816.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:17.116Z,1478920817.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:17.912Z,1478920817.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:18.708Z,1478920818.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:19.204Z,1478920819.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:19.000Z,1478920820.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:20.798Z,1478920820.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:21.552Z,1478920821.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:22.348Z,1478920822.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:23.145Z,1478920823.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:23.568Z,1478920823.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:24.364Z,1478920824.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:25.076Z,1478920825.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:25.872Z,1478920825.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:26.669Z,1478920826.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:27.080Z,1478920827.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:27.876Z,1478920827.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:28.675Z,1478920828.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:29.096Z,1478920829.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:29.892Z,1478920829.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:30.692Z,1478920830.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:31.100Z,1478920831.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:31.897Z,1478920831.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:32.692Z,1478920832.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:33.180Z,1478920833.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:33.976Z,1478920833.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:34.772Z,1478920834.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:35.530Z,1478920835.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:36.324Z,1478920836.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:37.121Z,1478920837.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:37.540Z,1478920837.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:38.336Z,1478920838.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:39.056Z,1478920839.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:39.852Z,1478920839.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:40.649Z,1478920840.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:41.064Z,1478920841.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:41.860Z,1478920841.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:42.660Z,1478920842.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:43.076Z,1478920843.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:43.872Z,1478920843.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:44.669Z,1478920844.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:45.080Z,1478920845.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:45.876Z,1478920845.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:46.674Z,1478920846.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:47.152Z,1478920847.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:47.948Z,1478920847.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:48.744Z,1478920848.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:49.281Z,1478920849.281 [BPC1](ERROR): Failed to receive battery data
2016-11-12T03:20:49.281Z,1478920849.281 [BPC1] Communications Fault, FailCount= 1
2016-11-12T03:20:49.281Z,1478920849.281 [BPC1](ERROR): Communications Fault
2016-11-12T03:20:49.348Z,1478920849.348 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-12T03:20:49.512Z,1478920849.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:50.308Z,1478920850.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:50.542Z,1478920850.542 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T03:20:50.542Z,1478920850.542 [BPC1] No Fault, FailCount= 1
2016-11-12T03:20:51.105Z,1478920851.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:51.516Z,1478920851.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:52.312Z,1478920852.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:53.040Z,1478920853.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:53.836Z,1478920853.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:54.638Z,1478920854.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:55.068Z,1478920855.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:55.864Z,1478920855.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:56.661Z,1478920856.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:57.072Z,1478920857.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:57.869Z,1478920857.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:58.664Z,1478920858.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:59.072Z,1478920859.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:20:59.868Z,1478920859.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:00.664Z,1478920860.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:01.136Z,1478920861.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:01.286Z,1478920861.286 [BPC1](ERROR): Failed to parse message.
2016-11-12T03:21:01.286Z,1478920861.286 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T03:21:01.286Z,1478920861.286 [BPC1] Data Fault, FailCount= 2
2016-11-12T03:21:01.286Z,1478920861.286 [BPC1](ERROR): Data Fault
2016-11-12T03:21:01.354Z,1478920861.354 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T03:21:01.932Z,1478920861.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:02.560Z,1478920862.560 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T03:21:02.560Z,1478920862.560 [BPC1] No Fault, FailCount= 2
2016-11-12T03:21:02.730Z,1478920862.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:03.492Z,1478920863.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:04.288Z,1478920864.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:05.086Z,1478920865.086 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:05.500Z,1478920865.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:06.296Z,1478920866.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:07.024Z,1478920867.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:07.820Z,1478920867.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:08.617Z,1478920868.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:09.028Z,1478920869.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:09.824Z,1478920869.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:10.621Z,1478920870.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:11.032Z,1478920871.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:11.828Z,1478920871.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:12.625Z,1478920872.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:13.036Z,1478920873.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:13.832Z,1478920873.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:14.628Z,1478920874.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:15.112Z,1478920875.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:15.908Z,1478920875.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:16.704Z,1478920876.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:17.476Z,1478920877.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:18.272Z,1478920878.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:19.069Z,1478920879.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:19.480Z,1478920879.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:20.276Z,1478920880.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:20.992Z,1478920880.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:21.788Z,1478920881.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:22.585Z,1478920882.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:23.012Z,1478920883.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:23.808Z,1478920883.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:24.605Z,1478920884.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:25.016Z,1478920885.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:25.812Z,1478920885.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:26.612Z,1478920886.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:27.032Z,1478920887.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:27.828Z,1478920887.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:28.624Z,1478920888.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:29.084Z,1478920889.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:29.880Z,1478920889.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:30.676Z,1478920890.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:31.444Z,1478920891.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:32.240Z,1478920892.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:33.039Z,1478920893.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:33.476Z,1478920893.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:34.272Z,1478920894.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:34.972Z,1478920894.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:35.768Z,1478920895.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:36.565Z,1478920896.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:36.976Z,1478920896.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:37.772Z,1478920897.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:38.569Z,1478920898.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:38.980Z,1478920898.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:39.777Z,1478920899.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:40.573Z,1478920900.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:40.984Z,1478920900.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:41.780Z,1478920901.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:42.576Z,1478920902.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:43.072Z,1478920903.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:43.868Z,1478920903.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:44.664Z,1478920904.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:45.420Z,1478920905.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:46.216Z,1478920906.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:47.012Z,1478920907.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:47.424Z,1478920907.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:48.221Z,1478920908.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:48.952Z,1478920908.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:49.748Z,1478920909.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:50.545Z,1478920910.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:50.956Z,1478920910.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:51.752Z,1478920911.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:52.549Z,1478920912.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:52.964Z,1478920912.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:53.760Z,1478920913.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:54.557Z,1478920914.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:54.968Z,1478920914.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:55.693Z,1478920915.693 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T03:21:55.693Z,1478920915.694 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 59
2016-11-12T03:21:55.694Z,1478920915.694 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T03:21:55.722Z,1478920915.722 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T03:21:55.764Z,1478920915.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:56.134Z,1478920916.134 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T03:21:56.134Z,1478920916.134 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 59
2016-11-12T03:21:56.485Z,1478920916.485 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T03:21:56.486Z,1478920916.486 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T03:21:56.486Z,1478920916.486 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T03:21:56.560Z,1478920916.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:57.048Z,1478920917.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:57.844Z,1478920917.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:58.641Z,1478920918.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:21:59.392Z,1478920919.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:00.188Z,1478920920.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:00.985Z,1478920920.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:01.396Z,1478920921.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:02.192Z,1478920922.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:02.920Z,1478920922.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:03.716Z,1478920923.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:04.513Z,1478920924.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:04.924Z,1478920924.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:05.720Z,1478920925.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:06.517Z,1478920926.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:06.928Z,1478920926.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:07.724Z,1478920927.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:08.521Z,1478920928.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:08.932Z,1478920928.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:09.728Z,1478920929.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:10.524Z,1478920930.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:11.012Z,1478920931.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:11.810Z,1478920931.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:12.604Z,1478920932.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:12.854Z,1478920932.855 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-12T03:17:12.5Z
2016-11-12T03:22:12.855Z,1478920932.855 [Default:CheckIn:Read_GPS] Stopped
2016-11-12T03:22:12.855Z,1478920932.855 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-12T03:22:13.376Z,1478920933.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:14.172Z,1478920934.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:14.969Z,1478920934.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:15.388Z,1478920935.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:16.184Z,1478920936.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:16.900Z,1478920936.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:17.696Z,1478920937.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:17.715Z,1478920937.716 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161111T044527/Courier0524.lzma
2016-11-12T03:22:18.503Z,1478920938.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:18.517Z,1478920938.517 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Courier0524.lzma.bak
2016-11-12T03:22:18.517Z,1478920938.517 [DataOverHttps](INFO): SBD MOMSN=4556030
2016-11-12T03:22:18.944Z,1478920938.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:19.740Z,1478920939.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:20.536Z,1478920940.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:20.944Z,1478920940.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:21.740Z,1478920941.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:22.536Z,1478920942.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:22.944Z,1478920942.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:23.740Z,1478920943.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:24.552Z,1478920944.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:24.988Z,1478920944.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:25.784Z,1478920945.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:26.580Z,1478920946.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:27.340Z,1478920947.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:28.136Z,1478920948.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:28.636Z,1478920948.636 [DataOverHttps](INFO): Sending 230 bytes from file Logs/20161111T044527/Express0525.lzma
2016-11-12T03:22:28.936Z,1478920948.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:29.356Z,1478920949.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:29.406Z,1478920949.406 [DataOverHttps](INFO): Moved sent file to Logs/20161111T044527/Express0525.lzma.bak
2016-11-12T03:22:29.406Z,1478920949.406 [DataOverHttps](INFO): SBD MOMSN=4556032
2016-11-12T03:22:30.152Z,1478920950.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:30.850Z,1478920950.850 [Default:CheckIn:Read_Iridium] Stopped
2016-11-12T03:22:30.850Z,1478920950.850 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-12T03:22:30.850Z,1478920950.850 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-12T03:22:30.868Z,1478920950.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:31.664Z,1478920951.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:32.461Z,1478920952.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:32.872Z,1478920952.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:33.668Z,1478920953.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:34.465Z,1478920954.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:34.876Z,1478920954.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:35.672Z,1478920955.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:36.468Z,1478920956.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:36.880Z,1478920956.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:37.676Z,1478920957.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:38.472Z,1478920958.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:38.952Z,1478920958.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:39.748Z,1478920959.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:40.544Z,1478920960.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:41.308Z,1478920961.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:42.104Z,1478920962.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:42.901Z,1478920962.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:43.312Z,1478920963.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:44.109Z,1478920964.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:44.844Z,1478920964.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:45.640Z,1478920965.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:46.436Z,1478920966.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:46.848Z,1478920966.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:47.644Z,1478920967.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:47.941Z,1478920967.941 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-12T03:22:48.441Z,1478920968.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:48.852Z,1478920968.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:49.648Z,1478920969.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:50.444Z,1478920970.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:50.856Z,1478920970.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:51.652Z,1478920971.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:52.448Z,1478920972.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:52.936Z,1478920972.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:53.540Z,1478920973.540 [NAL9602](INFO): Powering down
2016-11-12T03:22:53.732Z,1478920973.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:54.528Z,1478920974.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:55.296Z,1478920975.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:56.092Z,1478920976.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:56.889Z,1478920976.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:57.300Z,1478920977.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:58.096Z,1478920978.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:58.820Z,1478920978.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:22:59.616Z,1478920979.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:00.416Z,1478920980.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:00.828Z,1478920980.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:01.173Z,1478920981.173 [PNI_TCM](ERROR): CRC does not match. Expected:0x35058 got:0x91
2016-11-12T03:23:01.624Z,1478920981.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:02.420Z,1478920982.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:02.832Z,1478920982.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:03.628Z,1478920983.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:04.381Z,1478920984.381 [PNI_TCM](ERROR): CRC does not match. Expected:0x4637 got:0x43963
2016-11-12T03:23:04.425Z,1478920984.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:04.836Z,1478920984.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:05.632Z,1478920985.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:06.428Z,1478920986.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:06.904Z,1478920986.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:07.700Z,1478920987.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:08.497Z,1478920988.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:09.268Z,1478920989.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:10.064Z,1478920990.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:10.860Z,1478920990.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:11.272Z,1478920991.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:12.068Z,1478920992.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:12.804Z,1478920992.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:13.600Z,1478920993.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:14.396Z,1478920994.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:14.836Z,1478920994.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:15.632Z,1478920995.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:16.428Z,1478920996.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:16.836Z,1478920996.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:17.640Z,1478920997.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:18.436Z,1478920998.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:18.844Z,1478920998.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:19.640Z,1478920999.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:20.436Z,1478921000.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:20.892Z,1478921000.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:21.688Z,1478921001.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:22.484Z,1478921002.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:23.260Z,1478921003.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:24.056Z,1478921004.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:24.853Z,1478921004.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:25.264Z,1478921005.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:26.060Z,1478921006.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:26.808Z,1478921006.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:27.604Z,1478921007.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:28.400Z,1478921008.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:28.808Z,1478921008.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:29.604Z,1478921009.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:30.400Z,1478921010.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:30.812Z,1478921010.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:31.608Z,1478921011.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:32.404Z,1478921012.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:32.816Z,1478921012.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:33.613Z,1478921013.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:34.409Z,1478921014.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:34.872Z,1478921014.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:35.668Z,1478921015.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:36.464Z,1478921016.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:37.220Z,1478921017.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:38.016Z,1478921018.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:38.813Z,1478921018.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:39.224Z,1478921019.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:40.020Z,1478921020.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:40.780Z,1478921020.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:41.576Z,1478921021.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:42.373Z,1478921022.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:42.780Z,1478921022.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:43.576Z,1478921023.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:44.372Z,1478921024.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:44.780Z,1478921024.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:45.576Z,1478921025.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:46.372Z,1478921026.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:46.780Z,1478921026.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:47.576Z,1478921027.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:48.372Z,1478921028.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:48.844Z,1478921028.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:49.640Z,1478921029.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:50.436Z,1478921030.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:50.692Z,1478921030.692 [PNI_TCM](ERROR): CRC does not match. Expected:0x13908 got:0x49579
2016-11-12T03:23:51.224Z,1478921031.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:52.020Z,1478921032.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:52.816Z,1478921032.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:53.228Z,1478921033.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:54.024Z,1478921034.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:54.736Z,1478921034.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:55.532Z,1478921035.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:56.332Z,1478921036.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:56.744Z,1478921036.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:57.089Z,1478921037.089 [PNI_TCM](ERROR): CRC does not match. Expected:0x41819 got:0x35374
2016-11-12T03:23:57.540Z,1478921037.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:58.337Z,1478921038.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:58.748Z,1478921038.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:23:59.544Z,1478921039.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:00.346Z,1478921040.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:00.756Z,1478921040.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:01.552Z,1478921041.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:02.348Z,1478921042.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:02.828Z,1478921042.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:03.625Z,1478921043.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:04.420Z,1478921044.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:05.196Z,1478921045.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:05.992Z,1478921045.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:06.788Z,1478921046.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:07.200Z,1478921047.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:07.996Z,1478921047.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:08.708Z,1478921048.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:09.504Z,1478921049.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:10.301Z,1478921050.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:10.712Z,1478921050.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:11.508Z,1478921051.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:12.306Z,1478921052.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:12.724Z,1478921052.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:13.520Z,1478921053.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:14.317Z,1478921054.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:14.728Z,1478921054.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:15.524Z,1478921055.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:16.320Z,1478921056.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:16.808Z,1478921056.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:17.604Z,1478921057.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:18.400Z,1478921058.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:19.184Z,1478921059.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:19.980Z,1478921059.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:20.776Z,1478921060.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:21.188Z,1478921061.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:21.985Z,1478921061.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:22.744Z,1478921062.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:23.548Z,1478921063.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:24.344Z,1478921064.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:24.752Z,1478921064.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:25.548Z,1478921065.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:26.344Z,1478921066.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:26.752Z,1478921066.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:27.548Z,1478921067.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:28.344Z,1478921068.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:28.752Z,1478921068.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:29.548Z,1478921069.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:30.345Z,1478921070.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:30.784Z,1478921070.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:31.580Z,1478921071.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:32.376Z,1478921072.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:33.156Z,1478921073.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:33.952Z,1478921073.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:34.749Z,1478921074.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:35.160Z,1478921075.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:35.956Z,1478921075.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:36.668Z,1478921076.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:37.464Z,1478921077.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:38.261Z,1478921078.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:38.676Z,1478921078.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:39.472Z,1478921079.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:40.271Z,1478921080.270 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:40.692Z,1478921080.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:41.490Z,1478921081.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:42.284Z,1478921082.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:42.692Z,1478921082.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:43.496Z,1478921083.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:44.301Z,1478921084.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:44.773Z,1478921084.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:45.568Z,1478921085.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:46.364Z,1478921086.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:47.130Z,1478921087.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:47.924Z,1478921087.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:48.720Z,1478921088.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:49.176Z,1478921089.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:49.972Z,1478921089.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:50.644Z,1478921090.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:51.442Z,1478921091.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:52.237Z,1478921092.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:52.648Z,1478921092.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:53.444Z,1478921093.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:54.241Z,1478921094.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:54.652Z,1478921094.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:55.448Z,1478921095.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:56.245Z,1478921096.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:56.656Z,1478921096.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:56.768Z,1478921096.768 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-12T03:24:56.768Z,1478921096.768 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 60
2016-11-12T03:24:56.768Z,1478921096.768 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-12T03:24:56.787Z,1478921096.787 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-12T03:24:57.170Z,1478921097.170 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-12T03:24:57.170Z,1478921097.170 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 60
2016-11-12T03:24:57.452Z,1478921097.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:57.551Z,1478921097.551 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-12T03:24:57.552Z,1478921097.552 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-12T03:24:57.552Z,1478921097.552 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-12T03:24:58.248Z,1478921098.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:58.768Z,1478921098.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:24:59.564Z,1478921099.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:00.360Z,1478921100.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:01.120Z,1478921101.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:01.916Z,1478921101.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:02.712Z,1478921102.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:03.144Z,1478921103.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:03.940Z,1478921103.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:04.624Z,1478921104.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:05.420Z,1478921105.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:06.217Z,1478921106.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:06.628Z,1478921106.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:07.424Z,1478921107.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:08.221Z,1478921108.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:08.632Z,1478921108.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:09.428Z,1478921109.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:10.225Z,1478921110.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:10.640Z,1478921110.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:11.436Z,1478921111.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:12.232Z,1478921112.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:12.772Z,1478921112.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:13.568Z,1478921113.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:14.364Z,1478921114.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:15.076Z,1478921115.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:15.872Z,1478921115.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:16.669Z,1478921116.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:17.112Z,1478921117.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:17.520Z,1478921117.520 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-12T03:25:17.521Z,1478921117.520 [BPC1] Data Fault, FailCount= 1
2016-11-12T03:25:17.521Z,1478921117.521 [BPC1](ERROR): Data Fault
2016-11-12T03:25:17.589Z,1478921117.589 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-12T03:25:17.908Z,1478921117.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:18.600Z,1478921118.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:18.754Z,1478921118.754 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-12T03:25:18.755Z,1478921118.755 [BPC1] No Fault, FailCount= 1
2016-11-12T03:25:19.396Z,1478921119.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:20.193Z,1478921120.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:20.604Z,1478921120.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:21.400Z,1478921121.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:22.200Z,1478921122.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:22.620Z,1478921122.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:23.416Z,1478921123.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:24.213Z,1478921124.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:24.624Z,1478921124.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:25.420Z,1478921125.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:26.216Z,1478921126.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:26.748Z,1478921126.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:27.544Z,1478921127.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:28.340Z,1478921128.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:29.052Z,1478921129.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:29.848Z,1478921129.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:30.645Z,1478921130.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:31.056Z,1478921131.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:31.852Z,1478921131.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:32.580Z,1478921132.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:33.376Z,1478921133.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:34.173Z,1478921134.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:34.589Z,1478921134.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:35.384Z,1478921135.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:36.180Z,1478921136.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:36.624Z,1478921136.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:37.420Z,1478921137.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:38.216Z,1478921138.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:38.624Z,1478921138.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:39.420Z,1478921139.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:40.216Z,1478921140.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:40.680Z,1478921140.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:41.476Z,1478921141.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:42.273Z,1478921142.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:43.048Z,1478921143.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:43.844Z,1478921143.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:44.641Z,1478921144.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:45.052Z,1478921145.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:45.848Z,1478921145.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:46.604Z,1478921146.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:47.400Z,1478921147.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:48.196Z,1478921148.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:48.604Z,1478921148.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:49.400Z,1478921149.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:50.196Z,1478921150.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:50.604Z,1478921150.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:51.400Z,1478921151.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:52.196Z,1478921152.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:52.604Z,1478921152.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:53.400Z,1478921153.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:54.196Z,1478921154.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:54.652Z,1478921154.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:55.448Z,1478921155.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:56.244Z,1478921156.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:57.008Z,1478921157.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:57.808Z,1478921157.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:58.604Z,1478921158.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:59.016Z,1478921159.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:25:59.812Z,1478921159.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:00.536Z,1478921160.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:01.332Z,1478921161.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:02.129Z,1478921162.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:02.550Z,1478921162.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:03.344Z,1478921163.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:04.140Z,1478921164.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:04.553Z,1478921164.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:05.348Z,1478921165.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:06.144Z,1478921166.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:06.557Z,1478921166.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:07.352Z,1478921167.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:08.150Z,1478921168.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:08.628Z,1478921168.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:09.424Z,1478921169.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:10.220Z,1478921170.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:11.024Z,1478921171.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:11.820Z,1478921171.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:12.616Z,1478921172.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:13.024Z,1478921173.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:13.820Z,1478921173.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:14.521Z,1478921174.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:15.317Z,1478921175.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:16.113Z,1478921176.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:16.528Z,1478921176.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:17.326Z,1478921177.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:18.121Z,1478921178.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:18.544Z,1478921178.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:19.340Z,1478921179.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:20.147Z,1478921180.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:20.584Z,1478921180.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:21.380Z,1478921181.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:22.188Z,1478921182.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:22.644Z,1478921182.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:23.440Z,1478921183.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:24.236Z,1478921184.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:24.980Z,1478921184.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:25.776Z,1478921185.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:26.573Z,1478921186.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:26.984Z,1478921186.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:27.780Z,1478921187.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:28.504Z,1478921188.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:29.300Z,1478921189.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:30.097Z,1478921190.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-12T03:26:30.508Z,1478921190.508 [Rowe_600LCM](DEBUG): LCB